[Ingest 00:01:04 INFO] AERI STARTUP
[Ingest 00:01:04 INFO] Starting Watchdog Timer
[Autonomic 00:01:05 INFO] reading hatch daemon configuration file containing COM_PORT and TCP_PORT settings
[Ingest 00:01:05 INFO] 953M needed on drive
[Ingest 00:01:05 INFO] tidying up to clear space..
[Sequencer 00:01:07 INFO] NEWDAY 100710
[Sequencer 00:01:07 INFO] writing 100710 to state file \temp\current.day
[Sequencer 00:01:07 INFO] preparing for new day
[Sequencer 00:01:07 INFO] copying mirror sequence from \config\mirror.beg to \temp\mirror.scd
[Ingest 00:01:07 INFO] Configuring science work directories for newday
[Science 00:01:07 INFO] Copy \config\inst.id to \AE100710\cal\inst.id
[Science 00:01:07 INFO] Copy \config\aerihk.cfg to \AE100710\cal\aerihk.cfg
[Science 00:01:07 INFO] Copy \config\mandb to \AE100710\cal\mandb
[Science 00:01:07 INFO] Copy \config\rbridge.res to \AE100710\cal\rbridge.res
[Science 00:01:07 INFO] Copy \config\numsamps.avg to \AE100710\cal\numsamps.avg
[Science 00:01:07 INFO] Copy \config\abcvals.num to \AE100710\cal\abcvals.num
[Science 00:01:07 INFO] Copy \config\motheat.cfg to \AE100710\cal\motheat.cfg
[Science 00:01:08 INFO] Copy \config\aeri.pos to \AE100710\cal\aeri.pos
[Science 00:01:08 INFO] Copy \config\mirror.beg to \AE100710\cal\mirror.beg
[Science 00:01:08 INFO] Copy \config\op.set to \AE100710\cal\op.set
[Science 00:01:08 INFO] Copy \config\aeriemis.asc to \AE100710\cal\aeriemis.asc
[Science 00:01:08 INFO] Copy \config\rwaspc.sip to \AE100710\cal\rwaspc.sip
[Science 00:01:08 INFO] Copy \config\nlapp.sip to \AE100710\cal\nlapp.sip
[Science 00:01:08 INFO] Copy \config\aericalv.sip to \AE100710\cal\aericalv.sip
[Science 00:01:08 INFO] Copy \config\ffovcmr.si1 to \AE100710\cal\ffovcmr.si1
[Science 00:01:08 INFO] Copy \config\ffovcmr.si2 to \AE100710\cal\ffovcmr.si2
[Science 00:01:08 INFO] Copy \config\zfli.si1 to \AE100710\cal\zfli.si1
[Science 00:01:08 INFO] Copy \config\zfli.si2 to \AE100710\cal\zfli.si2
[Science 00:01:08 INFO] Copy \config\disk_min.cfg to \AE100710\cal\disk_min.cfg
[Science 00:01:08 INFO] Copy \config\aerisum.sip to \AE100710\cal\aerisum.sip
[Science 00:01:08 INFO] Copy \config\channel.map to \AE100710\cal\channel.map
[Science 00:01:08 INFO] Copy \config\aerigps.cfg to \AE100710\cal\aerigps.cfg
[Science 00:01:08 INFO] Copy \config\bbctrl.tmp to \AE100710\cal\bbctrl.tmp
[Science 00:01:08 INFO] Copy \config\outgoing.lis to \AE100710\cal\outgoing.lis
[Science 00:01:08 INFO] Copy \config\aemirsaf.cfg to \AE100710\cal\aemirsaf.cfg
[Science 00:01:09 INFO] \config\SUMARY.SCR and \config\SUMARY.SCR are the same
[Science 00:01:09 INFO] \config\AESITTER.SCR and \config\AESITTER.SCR are the same
[Science 00:01:09 INFO] \config\RADIANCE.SCR and \config\RADIANCE.SCR are the same
[Ingest 00:01:09 INFO] Writing PAR file
[Ingest 00:01:09 INFO] starting ingest XML message server
[Status 00:01:09 DEBUG] forking message pipes
[Ingest 00:01:09 INFO] programming mirror controller
[Ingest 00:01:18 INFO] starting up housekeeping subsystem
[Housekeeping 00:01:18 INFO] starting hresd
[Housekeeping 00:01:20 INFO] starting hresdd
[Housekeeping 00:01:22 INFO] checking housekeeping
[Housekeeping 00:01:28 INFO] starting aerihk
[Housekeeping 00:01:29 INFO] ready
[Ingest 00:01:29 INFO] preheating mirror motor
[Ingest 00:01:29 INFO] creating configuration files for Jada
[Jada 00:01:29 INFO] Copying \config\AESITTER.SCR to \FTP\AE100710\AESITTER.SCR
[Jada 00:01:29 INFO] Copying \config\RADIANCE.SCR to \FTP\AE100710\RADIANCE.SCR
[Jada 00:01:29 INFO] Copying \config\SUMARY.SCR to \FTP\AE100710\SUMARY.SCR
[Jada 00:01:29 INFO] Generating PAERI.xml insrument config in \FTP
[Jada 00:01:29 INFO] Writing \config\logger.xml.template config template to \AE100710\cal\logger.xml
[Jada 00:01:29 INFO] Copying log4j.dtd to \AE100710\cal
[Ingest 00:01:29 INFO] bootstrapping Jada user interface
[Jada 00:01:29 DEBUG] starting JVM: args=-Djava.library.path=\AERI_RUN\jada\lib -Xms25m -Xmx128m -jar \AERI_RUN\jada\jada.jar --log_cfg \AE100710\cal\logger.xml --inst_cfg \config\instruments.cfg --yymmdd 100710 work_dir=\AERI_RUN\jada
[Jada 00:01:29 INFO] JADA Started
[Ingest 00:01:29 INFO] cleaning out incomplete uncalibrated data from science work directory
[Tidy 00:01:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:01:29 DEBUG] no spc files to purge from science work dir!
[Tidy 00:01:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:01:29 DEBUG] no spc files to purge from science work dir!
[Tidy 00:01:29 DEBUG] no pending SIGs in ingest workspace
[Ingest 00:01:29 INFO] bootstrapping science pipeline
[Science 00:01:36 INFO] starting rwaspc process
[Science 00:01:38 INFO] starting nlapp processes
[Science 00:01:40 INFO] starting aericalv processes
[Science 00:01:42 INFO] starting scndirav processes
[Science 00:01:44 INFO] starting ffovcmr proceses
[Science 00:01:46 INFO] starting zfli processees
[Science 00:01:49 INFO] starting aerisum process
[Science 00:01:51 INFO] verifying that processes are running
[Ingest 00:01:51 INFO] waiting for mirror motor preheat to complete
[Ingest 00:02:20 INFO] starting the mirror monitor
[Ingest 00:02:20 INFO] AERI ready!
[WatchDog 00:02:20 INFO] resetting WatchDogTimer
[Status 00:02:21 INFO] Starting Set [AERI set: name H1, 6 scans, 60 angle, D22500 command]
[Ingest 00:02:21 INFO] Sending XML status message
[Status 00:02:21 INFO] Mirror angle: 60
[Mirror 00:02:21 INFO] rotating to position H
[Status 00:02:23 INFO] .SET file for ACQ96 ready
[Ingest 00:02:24 INFO] Starting acquisition
[Status 00:02:24 INFO] reading housekeeping
[Status 00:02:42 INFO] acquire complete
[Status 00:02:42 INFO] writing housekeeping
[Sequencer 00:02:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:02:42 INFO] incremented H scene to 1 completed views
[Sequencer 00:02:42 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:02:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:02:42 INFO] incremented to [AERI set: name A1, 6 scans, 120 angle, D28300 command] set
[sigmove 00:02:42 INFO] H1.SIG(18)
[sigmove 00:02:42 DEBUG] transformed H1Ma.SPC -> H1MA.SPC
[sigmove 00:02:42 DEBUG] transformed H1Mb.SPC -> H1MB.SPC
[sigmove 00:02:42 DEBUG] transformed H1Mc.SPC -> H1MC.SPC
[sigmove 00:02:42 DEBUG] transformed H1Md.SPC -> H1MD.SPC
[sigmove 00:02:42 DEBUG] transformed H1Me.SPC -> H1ME.SPC
[sigmove 00:02:42 DEBUG] transformed H1Mf.SPC -> H1MF.SPC
[Status 00:02:42 INFO] data for H1 transferred to science data processing
[Tidy 00:02:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:02:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:02:42 INFO] resetting WatchDogTimer
[Status 00:02:42 INFO] Starting Set [AERI set: name A1, 6 scans, 120 angle, D28300 command]
[Ingest 00:02:42 INFO] Sending XML status message
[Status 00:02:42 INFO] Mirror angle: 120
[Mirror 00:02:42 INFO] rotating to position A
[Status 00:02:43 INFO] .SET file for ACQ96 ready
[Ingest 00:02:43 INFO] Starting acquisition
[Status 00:02:43 INFO] reading housekeeping
[Status 00:03:01 INFO] acquire complete
[Status 00:03:01 INFO] writing housekeeping
[Sequencer 00:03:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:03:01 INFO] incremented A scene to 1 completed views
[Sequencer 00:03:01 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:03:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:03:01 INFO] incremented to [AERI set: name S1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:03:01 INFO] A1.SIG(18)
[sigmove 00:03:01 DEBUG] transformed A1Ma.SPC -> A1MA.SPC
[sigmove 00:03:01 DEBUG] transformed A1Mb.SPC -> A1MB.SPC
[sigmove 00:03:01 DEBUG] transformed A1Mc.SPC -> A1MC.SPC
[sigmove 00:03:01 DEBUG] transformed A1Md.SPC -> A1MD.SPC
[sigmove 00:03:01 DEBUG] transformed A1Me.SPC -> A1ME.SPC
[sigmove 00:03:01 DEBUG] transformed A1Mf.SPC -> A1MF.SPC
[Status 00:03:01 INFO] data for A1 transferred to science data processing
[Tidy 00:03:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:03:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:03:01 INFO] resetting WatchDogTimer
[Status 00:03:01 INFO] Starting Set [AERI set: name S1, 6 scans, 0 angle, D16300 command]
[Ingest 00:03:01 INFO] Sending XML status message
[Status 00:03:01 INFO] Mirror angle: 0
[Mirror 00:03:01 INFO] rotating to position S
[Status 00:03:03 INFO] .SET file for ACQ96 ready
[Ingest 00:03:03 INFO] Starting acquisition
[Status 00:03:03 INFO] reading housekeeping
[Status 00:03:21 INFO] acquire complete
[Status 00:03:21 INFO] writing housekeeping
[Sequencer 00:03:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:03:21 INFO] incremented S scene to 1 completed views
[Sequencer 00:03:21 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:03:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:03:21 INFO] incremented to [AERI set: name T1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:03:21 INFO] S1.SIG(18)
[sigmove 00:03:21 DEBUG] transformed S1Ma.SPC -> S1MA.SPC
[sigmove 00:03:21 DEBUG] transformed S1Mb.SPC -> S1MB.SPC
[sigmove 00:03:21 DEBUG] transformed S1Mc.SPC -> S1MC.SPC
[sigmove 00:03:21 DEBUG] transformed S1Md.SPC -> S1MD.SPC
[sigmove 00:03:21 DEBUG] transformed S1Me.SPC -> S1ME.SPC
[sigmove 00:03:21 DEBUG] transformed S1Mf.SPC -> S1MF.SPC
[Status 00:03:21 INFO] data for S1 transferred to science data processing
[Tidy 00:03:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:03:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:03:21 INFO] resetting WatchDogTimer
[Status 00:03:21 INFO] Starting Set [AERI set: name T1, 6 scans, 0 angle, D16300 command]
[Ingest 00:03:21 INFO] Sending XML status message
[Status 00:03:21 INFO] Mirror angle: 0
[Mirror 00:03:22 INFO] rotating to position T
[Status 00:03:22 INFO] .SET file for ACQ96 ready
[Ingest 00:03:22 INFO] Starting acquisition
[Status 00:03:22 INFO] reading housekeeping
[Status 00:03:40 INFO] acquire complete
[Status 00:03:40 INFO] writing housekeeping
[Sequencer 00:03:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:03:40 INFO] incremented T scene to 1 completed views
[Sequencer 00:03:40 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:03:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:03:40 INFO] incremented to [AERI set: name U1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:03:40 INFO] T1.SIG(18)
[sigmove 00:03:40 DEBUG] transformed T1Ma.SPC -> T1MA.SPC
[sigmove 00:03:40 DEBUG] transformed T1Mb.SPC -> T1MB.SPC
[sigmove 00:03:40 DEBUG] transformed T1Mc.SPC -> T1MC.SPC
[sigmove 00:03:40 DEBUG] transformed T1Md.SPC -> T1MD.SPC
[sigmove 00:03:40 DEBUG] transformed T1Me.SPC -> T1ME.SPC
[sigmove 00:03:40 DEBUG] transformed T1Mf.SPC -> T1MF.SPC
[Status 00:03:40 INFO] data for T1 transferred to science data processing
[Tidy 00:03:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:03:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:03:40 INFO] resetting WatchDogTimer
[Status 00:03:41 INFO] Starting Set [AERI set: name U1, 6 scans, 0 angle, D16300 command]
[Ingest 00:03:41 INFO] Sending XML status message
[Status 00:03:41 INFO] Mirror angle: 0
[Mirror 00:03:41 INFO] rotating to position U
[Status 00:03:41 INFO] .SET file for ACQ96 ready
[Ingest 00:03:41 INFO] Starting acquisition
[Status 00:03:41 INFO] reading housekeeping
[Status 00:03:59 INFO] acquire complete
[Status 00:04:00 INFO] writing housekeeping
[Sequencer 00:04:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:04:00 INFO] incremented U scene to 1 completed views
[Sequencer 00:04:00 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:04:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:04:00 INFO] incremented to [AERI set: name V1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:04:00 INFO] U1.SIG(18)
[sigmove 00:04:00 DEBUG] transformed U1Ma.SPC -> U1MA.SPC
[sigmove 00:04:00 DEBUG] transformed U1Mb.SPC -> U1MB.SPC
[sigmove 00:04:00 DEBUG] transformed U1Mc.SPC -> U1MC.SPC
[sigmove 00:04:00 DEBUG] transformed U1Md.SPC -> U1MD.SPC
[sigmove 00:04:00 DEBUG] transformed U1Me.SPC -> U1ME.SPC
[sigmove 00:04:00 DEBUG] transformed U1Mf.SPC -> U1MF.SPC
[Status 00:04:00 INFO] data for U1 transferred to science data processing
[Tidy 00:04:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:04:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:04:00 INFO] resetting WatchDogTimer
[Status 00:04:00 INFO] Starting Set [AERI set: name V1, 6 scans, 0 angle, D16300 command]
[Ingest 00:04:00 INFO] Sending XML status message
[Status 00:04:00 INFO] Mirror angle: 0
[Mirror 00:04:00 INFO] rotating to position V
[Status 00:04:00 INFO] .SET file for ACQ96 ready
[Ingest 00:04:00 INFO] Starting acquisition
[Status 00:04:00 INFO] reading housekeeping
[Status 00:04:18 INFO] acquire complete
[Status 00:04:19 INFO] writing housekeeping
[Sequencer 00:04:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:04:19 INFO] incremented V scene to 1 completed views
[Sequencer 00:04:19 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:04:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:04:19 INFO] incremented to [AERI set: name W1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:04:19 INFO] V1.SIG(18)
[sigmove 00:04:19 DEBUG] transformed V1Ma.SPC -> V1MA.SPC
[sigmove 00:04:19 DEBUG] transformed V1Mb.SPC -> V1MB.SPC
[sigmove 00:04:19 DEBUG] transformed V1Mc.SPC -> V1MC.SPC
[sigmove 00:04:19 DEBUG] transformed V1Md.SPC -> V1MD.SPC
[sigmove 00:04:19 DEBUG] transformed V1Me.SPC -> V1ME.SPC
[sigmove 00:04:19 DEBUG] transformed V1Mf.SPC -> V1MF.SPC
[Status 00:04:19 INFO] data for V1 transferred to science data processing
[Tidy 00:04:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:04:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:04:19 INFO] resetting WatchDogTimer
[Status 00:04:19 INFO] Starting Set [AERI set: name W1, 6 scans, 0 angle, D16300 command]
[Ingest 00:04:19 INFO] Sending XML status message
[Status 00:04:19 INFO] Mirror angle: 0
[Mirror 00:04:19 INFO] rotating to position W
[Status 00:04:19 INFO] .SET file for ACQ96 ready
[Ingest 00:04:19 INFO] Starting acquisition
[Status 00:04:19 INFO] reading housekeeping
[Status 00:04:37 INFO] acquire complete
[Status 00:04:38 INFO] writing housekeeping
[Sequencer 00:04:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:04:38 INFO] incremented W scene to 1 completed views
[Sequencer 00:04:38 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:04:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:04:38 INFO] incremented to [AERI set: name X1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:04:38 INFO] W1.SIG(18)
[sigmove 00:04:38 DEBUG] transformed W1Ma.SPC -> W1MA.SPC
[sigmove 00:04:38 DEBUG] transformed W1Mb.SPC -> W1MB.SPC
[sigmove 00:04:38 DEBUG] transformed W1Mc.SPC -> W1MC.SPC
[sigmove 00:04:38 DEBUG] transformed W1Md.SPC -> W1MD.SPC
[sigmove 00:04:38 DEBUG] transformed W1Me.SPC -> W1ME.SPC
[sigmove 00:04:38 DEBUG] transformed W1Mf.SPC -> W1MF.SPC
[Status 00:04:38 INFO] data for W1 transferred to science data processing
[Tidy 00:04:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:04:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:04:38 INFO] resetting WatchDogTimer
[Status 00:04:38 INFO] Starting Set [AERI set: name X1, 6 scans, 0 angle, D16300 command]
[Ingest 00:04:38 INFO] Sending XML status message
[Status 00:04:38 INFO] Mirror angle: 0
[Mirror 00:04:38 INFO] rotating to position X
[Status 00:04:38 INFO] .SET file for ACQ96 ready
[Ingest 00:04:38 INFO] Starting acquisition
[Status 00:04:38 INFO] reading housekeeping
[Status 00:04:57 INFO] acquire complete
[Status 00:04:57 INFO] writing housekeeping
[Sequencer 00:04:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:04:57 INFO] incremented X scene to 1 completed views
[Sequencer 00:04:57 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:04:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:04:57 INFO] incremented to [AERI set: name Y1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:04:57 INFO] X1.SIG(18)
[sigmove 00:04:57 DEBUG] transformed X1Ma.SPC -> X1MA.SPC
[sigmove 00:04:57 DEBUG] transformed X1Mb.SPC -> X1MB.SPC
[sigmove 00:04:57 DEBUG] transformed X1Mc.SPC -> X1MC.SPC
[sigmove 00:04:57 DEBUG] transformed X1Md.SPC -> X1MD.SPC
[sigmove 00:04:57 DEBUG] transformed X1Me.SPC -> X1ME.SPC
[sigmove 00:04:57 DEBUG] transformed X1Mf.SPC -> X1MF.SPC
[Status 00:04:57 INFO] data for X1 transferred to science data processing
[Tidy 00:04:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:04:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:04:57 INFO] resetting WatchDogTimer
[Status 00:04:57 INFO] Starting Set [AERI set: name Y1, 6 scans, 0 angle, D16300 command]
[Ingest 00:04:57 INFO] Sending XML status message
[Status 00:04:57 INFO] Mirror angle: 0
[Mirror 00:04:57 INFO] rotating to position Y
[Status 00:04:57 INFO] .SET file for ACQ96 ready
[Ingest 00:04:57 INFO] Starting acquisition
[Status 00:04:57 INFO] reading housekeeping
[Status 00:05:16 INFO] acquire complete
[Status 00:05:16 INFO] writing housekeeping
[Sequencer 00:05:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:05:16 INFO] incremented Y scene to 1 completed views
[Sequencer 00:05:16 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:05:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:05:16 INFO] incremented to [AERI set: name Z1, 6 scans, 0 angle, D16300 command] set
[sigmove 00:05:16 INFO] Y1.SIG(18)
[sigmove 00:05:16 DEBUG] transformed Y1Ma.SPC -> Y1MA.SPC
[sigmove 00:05:16 DEBUG] transformed Y1Mb.SPC -> Y1MB.SPC
[sigmove 00:05:16 DEBUG] transformed Y1Mc.SPC -> Y1MC.SPC
[sigmove 00:05:16 DEBUG] transformed Y1Md.SPC -> Y1MD.SPC
[sigmove 00:05:16 DEBUG] transformed Y1Me.SPC -> Y1ME.SPC
[sigmove 00:05:16 DEBUG] transformed Y1Mf.SPC -> Y1MF.SPC
[Status 00:05:16 INFO] data for Y1 transferred to science data processing
[Tidy 00:05:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:05:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:05:16 INFO] resetting WatchDogTimer
[Status 00:05:16 INFO] Starting Set [AERI set: name Z1, 6 scans, 0 angle, D16300 command]
[Ingest 00:05:16 INFO] Sending XML status message
[Status 00:05:16 INFO] Mirror angle: 0
[Mirror 00:05:16 INFO] rotating to position Z
[Status 00:05:16 INFO] .SET file for ACQ96 ready
[Ingest 00:05:16 INFO] Starting acquisition
[Status 00:05:16 INFO] reading housekeeping
[Status 00:05:35 INFO] acquire complete
[Status 00:05:35 INFO] writing housekeeping
[Sequencer 00:05:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:05:35 INFO] incremented Z scene to 1 completed views
[Sequencer 00:05:35 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:05:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:05:35 INFO] incremented to [AERI set: name A2, 6 scans, 120 angle, D28300 command] set
[sigmove 00:05:35 INFO] Z1.SIG(18)
[sigmove 00:05:35 DEBUG] transformed Z1Ma.SPC -> Z1MA.SPC
[sigmove 00:05:35 DEBUG] transformed Z1Mb.SPC -> Z1MB.SPC
[sigmove 00:05:35 DEBUG] transformed Z1Mc.SPC -> Z1MC.SPC
[sigmove 00:05:35 DEBUG] transformed Z1Md.SPC -> Z1MD.SPC
[sigmove 00:05:35 DEBUG] transformed Z1Me.SPC -> Z1ME.SPC
[sigmove 00:05:35 DEBUG] transformed Z1Mf.SPC -> Z1MF.SPC
[Status 00:05:35 INFO] data for Z1 transferred to science data processing
[Tidy 00:05:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:05:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:05:35 INFO] resetting WatchDogTimer
[Status 00:05:35 INFO] Starting Set [AERI set: name A2, 6 scans, 120 angle, D28300 command]
[Ingest 00:05:35 INFO] Sending XML status message
[Status 00:05:35 INFO] Mirror angle: 120
[Mirror 00:05:35 INFO] rotating to position A
[Status 00:05:36 INFO] .SET file for ACQ96 ready
[Ingest 00:05:36 INFO] Starting acquisition
[Status 00:05:36 INFO] reading housekeeping
[Status 00:05:55 INFO] acquire complete
[Status 00:05:55 INFO] writing housekeeping
[Sequencer 00:05:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:05:55 INFO] incremented A scene to 2 completed views
[Sequencer 00:05:55 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:05:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:05:55 INFO] incremented to [AERI set: name H2, 6 scans, 60 angle, D22500 command] set
[sigmove 00:05:55 INFO] A2.SIG(18)
[sigmove 00:05:55 DEBUG] transformed A2Ma.SPC -> A2MA.SPC
[sigmove 00:05:55 DEBUG] transformed A2Mb.SPC -> A2MB.SPC
[sigmove 00:05:55 DEBUG] transformed A2Mc.SPC -> A2MC.SPC
[sigmove 00:05:55 DEBUG] transformed A2Md.SPC -> A2MD.SPC
[sigmove 00:05:55 DEBUG] transformed A2Me.SPC -> A2ME.SPC
[sigmove 00:05:55 DEBUG] transformed A2Mf.SPC -> A2MF.SPC
[Status 00:05:55 INFO] data for A2 transferred to science data processing
[Tidy 00:05:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:05:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:05:55 INFO] resetting WatchDogTimer
[Status 00:05:55 INFO] Starting Set [AERI set: name H2, 6 scans, 60 angle, D22500 command]
[Ingest 00:05:55 INFO] Sending XML status message
[Status 00:05:55 INFO] Mirror angle: 60
[Mirror 00:05:55 INFO] rotating to position H
[Status 00:05:56 INFO] .SET file for ACQ96 ready
[Ingest 00:05:56 INFO] Starting acquisition
[Status 00:05:56 INFO] reading housekeeping
[Status 00:06:14 INFO] acquire complete
[Status 00:06:14 INFO] writing housekeeping
[Sequencer 00:06:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:06:14 INFO] incremented H scene to 2 completed views
[Sequencer 00:06:14 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:06:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:06:14 INFO] incremented to [AERI set: name S2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:06:14 INFO] H2.SIG(18)
[sigmove 00:06:14 DEBUG] transformed H2Ma.SPC -> H2MA.SPC
[sigmove 00:06:14 DEBUG] transformed H2Mb.SPC -> H2MB.SPC
[sigmove 00:06:14 DEBUG] transformed H2Mc.SPC -> H2MC.SPC
[sigmove 00:06:14 DEBUG] transformed H2Md.SPC -> H2MD.SPC
[sigmove 00:06:14 DEBUG] transformed H2Me.SPC -> H2ME.SPC
[sigmove 00:06:14 DEBUG] transformed H2Mf.SPC -> H2MF.SPC
[Status 00:06:14 INFO] data for H2 transferred to science data processing
[Tidy 00:06:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:06:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:06:14 INFO] resetting WatchDogTimer
[Status 00:06:14 INFO] Starting Set [AERI set: name S2, 6 scans, 0 angle, D16300 command]
[Ingest 00:06:14 INFO] Sending XML status message
[Status 00:06:14 INFO] Mirror angle: 0
[Mirror 00:06:14 INFO] rotating to position S
[Status 00:06:15 INFO] .SET file for ACQ96 ready
[Ingest 00:06:15 INFO] Starting acquisition
[Status 00:06:15 INFO] reading housekeeping
[Status 00:06:33 INFO] acquire complete
[Status 00:06:33 INFO] writing housekeeping
[Sequencer 00:06:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:06:33 INFO] incremented S scene to 2 completed views
[Sequencer 00:06:33 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:06:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:06:33 INFO] incremented to [AERI set: name T2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:06:33 INFO] S2.SIG(18)
[sigmove 00:06:33 DEBUG] transformed S2Ma.SPC -> S2MA.SPC
[sigmove 00:06:33 DEBUG] transformed S2Mb.SPC -> S2MB.SPC
[sigmove 00:06:33 DEBUG] transformed S2Mc.SPC -> S2MC.SPC
[sigmove 00:06:33 DEBUG] transformed S2Md.SPC -> S2MD.SPC
[sigmove 00:06:33 DEBUG] transformed S2Me.SPC -> S2ME.SPC
[sigmove 00:06:33 DEBUG] transformed S2Mf.SPC -> S2MF.SPC
[Status 00:06:33 INFO] data for S2 transferred to science data processing
[Tidy 00:06:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:06:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:06:33 INFO] resetting WatchDogTimer
[Status 00:06:33 INFO] Starting Set [AERI set: name T2, 6 scans, 0 angle, D16300 command]
[Ingest 00:06:33 INFO] Sending XML status message
[Status 00:06:33 INFO] Mirror angle: 0
[Mirror 00:06:34 INFO] rotating to position T
[Status 00:06:34 INFO] .SET file for ACQ96 ready
[Ingest 00:06:34 INFO] Starting acquisition
[Status 00:06:34 INFO] reading housekeeping
[Status 00:06:52 INFO] acquire complete
[Status 00:06:52 INFO] writing housekeeping
[Sequencer 00:06:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:06:52 INFO] incremented T scene to 2 completed views
[Sequencer 00:06:52 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:06:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:06:52 INFO] incremented to [AERI set: name U2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:06:52 INFO] T2.SIG(18)
[sigmove 00:06:52 DEBUG] transformed T2Ma.SPC -> T2MA.SPC
[sigmove 00:06:52 DEBUG] transformed T2Mb.SPC -> T2MB.SPC
[sigmove 00:06:52 DEBUG] transformed T2Mc.SPC -> T2MC.SPC
[sigmove 00:06:52 DEBUG] transformed T2Md.SPC -> T2MD.SPC
[sigmove 00:06:52 DEBUG] transformed T2Me.SPC -> T2ME.SPC
[sigmove 00:06:52 DEBUG] transformed T2Mf.SPC -> T2MF.SPC
[Status 00:06:52 INFO] data for T2 transferred to science data processing
[Tidy 00:06:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:06:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:06:52 INFO] resetting WatchDogTimer
[Status 00:06:53 INFO] Starting Set [AERI set: name U2, 6 scans, 0 angle, D16300 command]
[Ingest 00:06:53 INFO] Sending XML status message
[Status 00:06:53 INFO] Mirror angle: 0
[Mirror 00:06:53 INFO] rotating to position U
[Status 00:06:53 INFO] .SET file for ACQ96 ready
[Ingest 00:06:53 INFO] Starting acquisition
[Status 00:06:53 INFO] reading housekeeping
[Status 00:07:11 INFO] acquire complete
[Status 00:07:11 INFO] writing housekeeping
[Sequencer 00:07:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:07:11 INFO] incremented U scene to 2 completed views
[Sequencer 00:07:11 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:07:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:07:12 INFO] incremented to [AERI set: name V2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:07:12 INFO] U2.SIG(18)
[sigmove 00:07:12 DEBUG] transformed U2Ma.SPC -> U2MA.SPC
[sigmove 00:07:12 DEBUG] transformed U2Mb.SPC -> U2MB.SPC
[sigmove 00:07:12 DEBUG] transformed U2Mc.SPC -> U2MC.SPC
[sigmove 00:07:12 DEBUG] transformed U2Md.SPC -> U2MD.SPC
[sigmove 00:07:12 DEBUG] transformed U2Me.SPC -> U2ME.SPC
[sigmove 00:07:12 DEBUG] transformed U2Mf.SPC -> U2MF.SPC
[Status 00:07:12 INFO] data for U2 transferred to science data processing
[Tidy 00:07:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:07:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:07:12 INFO] resetting WatchDogTimer
[Status 00:07:12 INFO] Starting Set [AERI set: name V2, 6 scans, 0 angle, D16300 command]
[Ingest 00:07:12 INFO] Sending XML status message
[Status 00:07:12 INFO] Mirror angle: 0
[Mirror 00:07:12 INFO] rotating to position V
[Status 00:07:12 INFO] .SET file for ACQ96 ready
[Ingest 00:07:12 INFO] Starting acquisition
[Status 00:07:12 INFO] reading housekeeping
[Status 00:07:30 INFO] acquire complete
[Status 00:07:31 INFO] writing housekeeping
[Sequencer 00:07:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:07:31 INFO] incremented V scene to 2 completed views
[Sequencer 00:07:31 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:07:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:07:31 INFO] incremented to [AERI set: name W2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:07:31 INFO] V2.SIG(18)
[sigmove 00:07:31 DEBUG] transformed V2Ma.SPC -> V2MA.SPC
[sigmove 00:07:31 DEBUG] transformed V2Mb.SPC -> V2MB.SPC
[sigmove 00:07:31 DEBUG] transformed V2Mc.SPC -> V2MC.SPC
[sigmove 00:07:31 DEBUG] transformed V2Md.SPC -> V2MD.SPC
[sigmove 00:07:31 DEBUG] transformed V2Me.SPC -> V2ME.SPC
[sigmove 00:07:31 DEBUG] transformed V2Mf.SPC -> V2MF.SPC
[Status 00:07:31 INFO] data for V2 transferred to science data processing
[Tidy 00:07:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:07:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:07:31 INFO] resetting WatchDogTimer
[Status 00:07:31 INFO] Starting Set [AERI set: name W2, 6 scans, 0 angle, D16300 command]
[Ingest 00:07:31 INFO] Sending XML status message
[Status 00:07:31 INFO] Mirror angle: 0
[Mirror 00:07:31 INFO] rotating to position W
[Status 00:07:31 INFO] .SET file for ACQ96 ready
[Ingest 00:07:31 INFO] Starting acquisition
[Status 00:07:31 INFO] reading housekeeping
[Status 00:07:49 INFO] acquire complete
[Status 00:07:50 INFO] writing housekeeping
[Sequencer 00:07:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:07:50 INFO] incremented W scene to 2 completed views
[Sequencer 00:07:50 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:07:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:07:50 INFO] incremented to [AERI set: name X2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:07:50 INFO] W2.SIG(18)
[sigmove 00:07:50 DEBUG] transformed W2Ma.SPC -> W2MA.SPC
[sigmove 00:07:50 DEBUG] transformed W2Mb.SPC -> W2MB.SPC
[sigmove 00:07:50 DEBUG] transformed W2Mc.SPC -> W2MC.SPC
[sigmove 00:07:50 DEBUG] transformed W2Md.SPC -> W2MD.SPC
[sigmove 00:07:50 DEBUG] transformed W2Me.SPC -> W2ME.SPC
[sigmove 00:07:50 DEBUG] transformed W2Mf.SPC -> W2MF.SPC
[Status 00:07:50 INFO] data for W2 transferred to science data processing
[Tidy 00:07:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:07:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:07:50 INFO] resetting WatchDogTimer
[Status 00:07:50 INFO] Starting Set [AERI set: name X2, 6 scans, 0 angle, D16300 command]
[Ingest 00:07:50 INFO] Sending XML status message
[Status 00:07:50 INFO] Mirror angle: 0
[Mirror 00:07:50 INFO] rotating to position X
[Status 00:07:50 INFO] .SET file for ACQ96 ready
[Ingest 00:07:50 INFO] Starting acquisition
[Status 00:07:50 INFO] reading housekeeping
[Status 00:08:08 INFO] acquire complete
[Status 00:08:09 INFO] writing housekeeping
[Sequencer 00:08:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:08:09 INFO] incremented X scene to 2 completed views
[Sequencer 00:08:09 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:08:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:08:09 INFO] incremented to [AERI set: name Y2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:08:09 INFO] X2.SIG(18)
[sigmove 00:08:09 DEBUG] transformed X2Ma.SPC -> X2MA.SPC
[sigmove 00:08:09 DEBUG] transformed X2Mb.SPC -> X2MB.SPC
[sigmove 00:08:09 DEBUG] transformed X2Mc.SPC -> X2MC.SPC
[sigmove 00:08:09 DEBUG] transformed X2Md.SPC -> X2MD.SPC
[sigmove 00:08:09 DEBUG] transformed X2Me.SPC -> X2ME.SPC
[sigmove 00:08:09 DEBUG] transformed X2Mf.SPC -> X2MF.SPC
[Status 00:08:09 INFO] data for X2 transferred to science data processing
[Tidy 00:08:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:08:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:08:09 INFO] resetting WatchDogTimer
[Status 00:08:09 INFO] Starting Set [AERI set: name Y2, 6 scans, 0 angle, D16300 command]
[Ingest 00:08:09 INFO] Sending XML status message
[Status 00:08:09 INFO] Mirror angle: 0
[Mirror 00:08:09 INFO] rotating to position Y
[Status 00:08:09 INFO] .SET file for ACQ96 ready
[Ingest 00:08:09 INFO] Starting acquisition
[Status 00:08:09 INFO] reading housekeeping
[Status 00:08:28 INFO] acquire complete
[Status 00:08:28 INFO] writing housekeeping
[Sequencer 00:08:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:08:28 INFO] incremented Y scene to 2 completed views
[Sequencer 00:08:28 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:08:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:08:28 INFO] incremented to [AERI set: name Z2, 6 scans, 0 angle, D16300 command] set
[sigmove 00:08:28 INFO] Y2.SIG(18)
[sigmove 00:08:28 DEBUG] transformed Y2Ma.SPC -> Y2MA.SPC
[sigmove 00:08:28 DEBUG] transformed Y2Mb.SPC -> Y2MB.SPC
[sigmove 00:08:28 DEBUG] transformed Y2Mc.SPC -> Y2MC.SPC
[sigmove 00:08:28 DEBUG] transformed Y2Md.SPC -> Y2MD.SPC
[sigmove 00:08:28 DEBUG] transformed Y2Me.SPC -> Y2ME.SPC
[sigmove 00:08:28 DEBUG] transformed Y2Mf.SPC -> Y2MF.SPC
[Status 00:08:28 INFO] data for Y2 transferred to science data processing
[Tidy 00:08:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:08:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:08:28 INFO] resetting WatchDogTimer
[Status 00:08:28 INFO] Starting Set [AERI set: name Z2, 6 scans, 0 angle, D16300 command]
[Ingest 00:08:28 INFO] Sending XML status message
[Status 00:08:28 INFO] Mirror angle: 0
[Mirror 00:08:28 INFO] rotating to position Z
[Status 00:08:28 INFO] .SET file for ACQ96 ready
[Ingest 00:08:28 INFO] Starting acquisition
[Status 00:08:28 INFO] reading housekeeping
[Status 00:08:47 INFO] acquire complete
[Status 00:08:47 INFO] writing housekeeping
[Sequencer 00:08:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:08:47 INFO] incremented Z scene to 2 completed views
[Sequencer 00:08:47 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:08:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:08:47 INFO] incremented to [AERI set: name H3, 6 scans, 60 angle, D22500 command] set
[sigmove 00:08:47 INFO] Z2.SIG(18)
[sigmove 00:08:47 DEBUG] transformed Z2Ma.SPC -> Z2MA.SPC
[sigmove 00:08:47 DEBUG] transformed Z2Mb.SPC -> Z2MB.SPC
[sigmove 00:08:47 DEBUG] transformed Z2Mc.SPC -> Z2MC.SPC
[sigmove 00:08:47 DEBUG] transformed Z2Md.SPC -> Z2MD.SPC
[sigmove 00:08:47 DEBUG] transformed Z2Me.SPC -> Z2ME.SPC
[sigmove 00:08:47 DEBUG] transformed Z2Mf.SPC -> Z2MF.SPC
[Status 00:08:47 INFO] data for Z2 transferred to science data processing
[Tidy 00:08:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:08:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:08:47 INFO] resetting WatchDogTimer
[Status 00:08:47 INFO] Starting Set [AERI set: name H3, 6 scans, 60 angle, D22500 command]
[Ingest 00:08:47 INFO] Sending XML status message
[Status 00:08:47 INFO] Mirror angle: 60
[Mirror 00:08:47 INFO] rotating to position H
[Status 00:08:48 INFO] .SET file for ACQ96 ready
[Ingest 00:08:48 INFO] Starting acquisition
[Status 00:08:48 INFO] reading housekeeping
[Status 00:09:06 INFO] acquire complete
[Status 00:09:06 INFO] writing housekeeping
[Sequencer 00:09:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:09:06 INFO] incremented H scene to 3 completed views
[Sequencer 00:09:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:09:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:09:06 INFO] incremented to [AERI set: name A3, 6 scans, 120 angle, D28300 command] set
[sigmove 00:09:06 INFO] H3.SIG(18)
[sigmove 00:09:06 DEBUG] transformed H3Ma.SPC -> H3MA.SPC
[sigmove 00:09:06 DEBUG] transformed H3Mb.SPC -> H3MB.SPC
[sigmove 00:09:06 DEBUG] transformed H3Mc.SPC -> H3MC.SPC
[sigmove 00:09:06 DEBUG] transformed H3Md.SPC -> H3MD.SPC
[sigmove 00:09:06 DEBUG] transformed H3Me.SPC -> H3ME.SPC
[sigmove 00:09:06 DEBUG] transformed H3Mf.SPC -> H3MF.SPC
[Status 00:09:06 INFO] data for H3 transferred to science data processing
[Tidy 00:09:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:09:06 INFO] A1.FIN(19),H1.FIN(19),S1.FIN(19),T1.FIN(19),U1.FIN(19),V1.FIN(19),W1.FIN(19),X1.FIN(19),Y1.FIN(19),Z1.FIN(19),A2.FIN(19),H2.FIN(19),S2.FIN(19),T2.FIN(19),U2.FIN(19),V2.FIN(19),W2.FIN(19),X2.FIN(19),Y2.FIN(19),Z2.FIN(19)
[sigmove 00:09:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:09:06 INFO] creating zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:09:06 DEBUG] done zipping
[WatchDog 00:09:06 INFO] resetting WatchDogTimer
[Status 00:09:07 INFO] Starting Set [AERI set: name A3, 6 scans, 120 angle, D28300 command]
[Ingest 00:09:07 INFO] Sending XML status message
[Status 00:09:07 INFO] Mirror angle: 120
[Mirror 00:09:07 INFO] rotating to position A
[Status 00:09:07 INFO] .SET file for ACQ96 ready
[Ingest 00:09:07 INFO] Starting acquisition
[Status 00:09:07 INFO] reading housekeeping
[Status 00:09:25 INFO] acquire complete
[Status 00:09:25 INFO] writing housekeeping
[Sequencer 00:09:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:09:25 INFO] incremented A scene to 3 completed views
[Sequencer 00:09:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:09:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:09:25 INFO] incremented to [AERI set: name S3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:09:25 INFO] A3.SIG(18)
[sigmove 00:09:25 DEBUG] transformed A3Ma.SPC -> A3MA.SPC
[sigmove 00:09:25 DEBUG] transformed A3Mb.SPC -> A3MB.SPC
[sigmove 00:09:25 DEBUG] transformed A3Mc.SPC -> A3MC.SPC
[sigmove 00:09:25 DEBUG] transformed A3Md.SPC -> A3MD.SPC
[sigmove 00:09:25 DEBUG] transformed A3Me.SPC -> A3ME.SPC
[sigmove 00:09:25 DEBUG] transformed A3Mf.SPC -> A3MF.SPC
[Status 00:09:25 INFO] data for A3 transferred to science data processing
[Tidy 00:09:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:09:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:09:25 INFO] resetting WatchDogTimer
[Status 00:09:25 INFO] Starting Set [AERI set: name S3, 6 scans, 0 angle, D16300 command]
[Ingest 00:09:25 INFO] Sending XML status message
[Status 00:09:25 INFO] Mirror angle: 0
[Mirror 00:09:25 INFO] rotating to position S
[Status 00:09:26 INFO] .SET file for ACQ96 ready
[Ingest 00:09:26 INFO] Starting acquisition
[Status 00:09:27 INFO] reading housekeeping
[Status 00:09:44 INFO] acquire complete
[Status 00:09:44 INFO] writing housekeeping
[Sequencer 00:09:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:09:44 INFO] incremented S scene to 3 completed views
[Sequencer 00:09:44 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:09:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:09:44 INFO] incremented to [AERI set: name T3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:09:44 INFO] S3.SIG(18)
[sigmove 00:09:44 DEBUG] transformed S3Ma.SPC -> S3MA.SPC
[sigmove 00:09:44 DEBUG] transformed S3Mb.SPC -> S3MB.SPC
[sigmove 00:09:44 DEBUG] transformed S3Mc.SPC -> S3MC.SPC
[sigmove 00:09:44 DEBUG] transformed S3Md.SPC -> S3MD.SPC
[sigmove 00:09:44 DEBUG] transformed S3Me.SPC -> S3ME.SPC
[sigmove 00:09:44 DEBUG] transformed S3Mf.SPC -> S3MF.SPC
[Status 00:09:44 INFO] data for S3 transferred to science data processing
[Tidy 00:09:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:09:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:09:44 INFO] resetting WatchDogTimer
[Status 00:09:44 INFO] Starting Set [AERI set: name T3, 6 scans, 0 angle, D16300 command]
[Ingest 00:09:44 INFO] Sending XML status message
[Status 00:09:44 INFO] Mirror angle: 0
[Mirror 00:09:44 INFO] rotating to position T
[Status 00:09:44 INFO] .SET file for ACQ96 ready
[Ingest 00:09:45 INFO] Starting acquisition
[Status 00:09:45 INFO] reading housekeeping
[Status 00:10:03 INFO] acquire complete
[Status 00:10:03 INFO] writing housekeeping
[Sequencer 00:10:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:10:03 INFO] incremented T scene to 3 completed views
[Sequencer 00:10:03 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:10:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:10:03 INFO] incremented to [AERI set: name U3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:10:03 INFO] T3.SIG(18)
[sigmove 00:10:03 DEBUG] transformed T3Ma.SPC -> T3MA.SPC
[sigmove 00:10:03 DEBUG] transformed T3Mb.SPC -> T3MB.SPC
[sigmove 00:10:03 DEBUG] transformed T3Mc.SPC -> T3MC.SPC
[sigmove 00:10:03 DEBUG] transformed T3Md.SPC -> T3MD.SPC
[sigmove 00:10:03 DEBUG] transformed T3Me.SPC -> T3ME.SPC
[sigmove 00:10:03 DEBUG] transformed T3Mf.SPC -> T3MF.SPC
[Status 00:10:03 INFO] data for T3 transferred to science data processing
[Tidy 00:10:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:10:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:10:03 INFO] resetting WatchDogTimer
[Status 00:10:03 INFO] Starting Set [AERI set: name U3, 6 scans, 0 angle, D16300 command]
[Ingest 00:10:03 INFO] Sending XML status message
[Status 00:10:03 INFO] Mirror angle: 0
[Mirror 00:10:03 INFO] rotating to position U
[Status 00:10:04 INFO] .SET file for ACQ96 ready
[Ingest 00:10:04 INFO] Starting acquisition
[Status 00:10:04 INFO] reading housekeeping
[Status 00:10:22 INFO] acquire complete
[Status 00:10:22 INFO] writing housekeeping
[Sequencer 00:10:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:10:22 INFO] incremented U scene to 3 completed views
[Sequencer 00:10:22 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:10:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:10:22 INFO] incremented to [AERI set: name V3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:10:22 INFO] U3.SIG(18)
[sigmove 00:10:22 DEBUG] transformed U3Ma.SPC -> U3MA.SPC
[sigmove 00:10:22 DEBUG] transformed U3Mb.SPC -> U3MB.SPC
[sigmove 00:10:22 DEBUG] transformed U3Mc.SPC -> U3MC.SPC
[sigmove 00:10:22 DEBUG] transformed U3Md.SPC -> U3MD.SPC
[sigmove 00:10:22 DEBUG] transformed U3Me.SPC -> U3ME.SPC
[sigmove 00:10:22 DEBUG] transformed U3Mf.SPC -> U3MF.SPC
[Status 00:10:22 INFO] data for U3 transferred to science data processing
[Tidy 00:10:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:10:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:10:22 INFO] resetting WatchDogTimer
[Status 00:10:22 INFO] Starting Set [AERI set: name V3, 6 scans, 0 angle, D16300 command]
[Ingest 00:10:22 INFO] Sending XML status message
[Status 00:10:22 INFO] Mirror angle: 0
[Mirror 00:10:22 INFO] rotating to position V
[Status 00:10:23 INFO] .SET file for ACQ96 ready
[Ingest 00:10:23 INFO] Starting acquisition
[Status 00:10:23 INFO] reading housekeeping
[Status 00:10:41 INFO] acquire complete
[Status 00:10:41 INFO] writing housekeeping
[Sequencer 00:10:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:10:41 INFO] incremented V scene to 3 completed views
[Sequencer 00:10:41 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:10:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:10:41 INFO] incremented to [AERI set: name W3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:10:41 INFO] V3.SIG(18)
[sigmove 00:10:41 DEBUG] transformed V3Ma.SPC -> V3MA.SPC
[sigmove 00:10:41 DEBUG] transformed V3Mb.SPC -> V3MB.SPC
[sigmove 00:10:41 DEBUG] transformed V3Mc.SPC -> V3MC.SPC
[sigmove 00:10:41 DEBUG] transformed V3Md.SPC -> V3MD.SPC
[sigmove 00:10:41 DEBUG] transformed V3Me.SPC -> V3ME.SPC
[sigmove 00:10:41 DEBUG] transformed V3Mf.SPC -> V3MF.SPC
[Status 00:10:41 INFO] data for V3 transferred to science data processing
[Tidy 00:10:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:10:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:10:41 INFO] resetting WatchDogTimer
[Status 00:10:42 INFO] Starting Set [AERI set: name W3, 6 scans, 0 angle, D16300 command]
[Ingest 00:10:42 INFO] Sending XML status message
[Status 00:10:42 INFO] Mirror angle: 0
[Mirror 00:10:42 INFO] rotating to position W
[Status 00:10:42 INFO] .SET file for ACQ96 ready
[Ingest 00:10:42 INFO] Starting acquisition
[Status 00:10:42 INFO] reading housekeeping
[Status 00:11:00 INFO] acquire complete
[Status 00:11:00 INFO] writing housekeeping
[Sequencer 00:11:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:11:00 INFO] incremented W scene to 3 completed views
[Sequencer 00:11:00 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:11:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:11:01 INFO] incremented to [AERI set: name X3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:11:01 INFO] W3.SIG(18)
[sigmove 00:11:01 DEBUG] transformed W3Ma.SPC -> W3MA.SPC
[sigmove 00:11:01 DEBUG] transformed W3Mb.SPC -> W3MB.SPC
[sigmove 00:11:01 DEBUG] transformed W3Mc.SPC -> W3MC.SPC
[sigmove 00:11:01 DEBUG] transformed W3Md.SPC -> W3MD.SPC
[sigmove 00:11:01 DEBUG] transformed W3Me.SPC -> W3ME.SPC
[sigmove 00:11:01 DEBUG] transformed W3Mf.SPC -> W3MF.SPC
[Status 00:11:01 INFO] data for W3 transferred to science data processing
[Tidy 00:11:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:11:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:11:01 INFO] resetting WatchDogTimer
[Status 00:11:01 INFO] Starting Set [AERI set: name X3, 6 scans, 0 angle, D16300 command]
[Ingest 00:11:01 INFO] Sending XML status message
[Status 00:11:01 INFO] Mirror angle: 0
[Mirror 00:11:01 INFO] rotating to position X
[Status 00:11:01 INFO] .SET file for ACQ96 ready
[Ingest 00:11:01 INFO] Starting acquisition
[Status 00:11:01 INFO] reading housekeeping
[Status 00:11:19 INFO] acquire complete
[Status 00:11:20 INFO] writing housekeeping
[Sequencer 00:11:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:11:20 INFO] incremented X scene to 3 completed views
[Sequencer 00:11:20 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:11:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:11:20 INFO] incremented to [AERI set: name Y3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:11:20 INFO] X3.SIG(18)
[sigmove 00:11:20 DEBUG] transformed X3Ma.SPC -> X3MA.SPC
[sigmove 00:11:20 DEBUG] transformed X3Mb.SPC -> X3MB.SPC
[sigmove 00:11:20 DEBUG] transformed X3Mc.SPC -> X3MC.SPC
[sigmove 00:11:20 DEBUG] transformed X3Md.SPC -> X3MD.SPC
[sigmove 00:11:20 DEBUG] transformed X3Me.SPC -> X3ME.SPC
[sigmove 00:11:20 DEBUG] transformed X3Mf.SPC -> X3MF.SPC
[Status 00:11:20 INFO] data for X3 transferred to science data processing
[Tidy 00:11:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:11:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:11:20 INFO] resetting WatchDogTimer
[Status 00:11:20 INFO] Starting Set [AERI set: name Y3, 6 scans, 0 angle, D16300 command]
[Ingest 00:11:20 INFO] Sending XML status message
[Status 00:11:20 INFO] Mirror angle: 0
[Mirror 00:11:20 INFO] rotating to position Y
[Status 00:11:20 INFO] .SET file for ACQ96 ready
[Ingest 00:11:20 INFO] Starting acquisition
[Status 00:11:20 INFO] reading housekeeping
[Status 00:11:38 INFO] acquire complete
[Status 00:11:39 INFO] writing housekeeping
[Sequencer 00:11:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:11:39 INFO] incremented Y scene to 3 completed views
[Sequencer 00:11:39 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:11:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:11:39 INFO] incremented to [AERI set: name Z3, 6 scans, 0 angle, D16300 command] set
[sigmove 00:11:39 INFO] Y3.SIG(18)
[sigmove 00:11:39 DEBUG] transformed Y3Ma.SPC -> Y3MA.SPC
[sigmove 00:11:39 DEBUG] transformed Y3Mb.SPC -> Y3MB.SPC
[sigmove 00:11:39 DEBUG] transformed Y3Mc.SPC -> Y3MC.SPC
[sigmove 00:11:39 DEBUG] transformed Y3Md.SPC -> Y3MD.SPC
[sigmove 00:11:39 DEBUG] transformed Y3Me.SPC -> Y3ME.SPC
[sigmove 00:11:39 DEBUG] transformed Y3Mf.SPC -> Y3MF.SPC
[Status 00:11:39 INFO] data for Y3 transferred to science data processing
[Tidy 00:11:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:11:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:11:39 INFO] resetting WatchDogTimer
[Status 00:11:39 INFO] Starting Set [AERI set: name Z3, 6 scans, 0 angle, D16300 command]
[Ingest 00:11:39 INFO] Sending XML status message
[Status 00:11:39 INFO] Mirror angle: 0
[Mirror 00:11:39 INFO] rotating to position Z
[Status 00:11:39 INFO] .SET file for ACQ96 ready
[Ingest 00:11:39 INFO] Starting acquisition
[Status 00:11:39 INFO] reading housekeeping
[Status 00:11:57 INFO] acquire complete
[Status 00:11:58 INFO] writing housekeeping
[Sequencer 00:11:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:11:58 INFO] incremented Z scene to 3 completed views
[Sequencer 00:11:58 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:11:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:11:58 INFO] incremented to [AERI set: name A4, 6 scans, 120 angle, D28300 command] set
[sigmove 00:11:58 INFO] Z3.SIG(18)
[sigmove 00:11:58 DEBUG] transformed Z3Ma.SPC -> Z3MA.SPC
[sigmove 00:11:58 DEBUG] transformed Z3Mb.SPC -> Z3MB.SPC
[sigmove 00:11:58 DEBUG] transformed Z3Mc.SPC -> Z3MC.SPC
[sigmove 00:11:58 DEBUG] transformed Z3Md.SPC -> Z3MD.SPC
[sigmove 00:11:58 DEBUG] transformed Z3Me.SPC -> Z3ME.SPC
[sigmove 00:11:58 DEBUG] transformed Z3Mf.SPC -> Z3MF.SPC
[Status 00:11:58 INFO] data for Z3 transferred to science data processing
[Tidy 00:11:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:11:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:11:58 INFO] resetting WatchDogTimer
[Status 00:11:58 INFO] Starting Set [AERI set: name A4, 6 scans, 120 angle, D28300 command]
[Ingest 00:11:58 INFO] Sending XML status message
[Status 00:11:58 INFO] Mirror angle: 120
[Mirror 00:11:58 INFO] rotating to position A
[Status 00:11:59 INFO] .SET file for ACQ96 ready
[Ingest 00:11:59 INFO] Starting acquisition
[Status 00:11:59 INFO] reading housekeeping
[Status 00:12:18 INFO] acquire complete
[Status 00:12:18 INFO] writing housekeeping
[Sequencer 00:12:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:12:18 INFO] incremented A scene to 4 completed views
[Sequencer 00:12:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:12:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:12:18 INFO] incremented to [AERI set: name H4, 6 scans, 60 angle, D22500 command] set
[sigmove 00:12:18 INFO] A4.SIG(18)
[sigmove 00:12:18 DEBUG] transformed A4Ma.SPC -> A4MA.SPC
[sigmove 00:12:18 DEBUG] transformed A4Mb.SPC -> A4MB.SPC
[sigmove 00:12:18 DEBUG] transformed A4Mc.SPC -> A4MC.SPC
[sigmove 00:12:18 DEBUG] transformed A4Md.SPC -> A4MD.SPC
[sigmove 00:12:18 DEBUG] transformed A4Me.SPC -> A4ME.SPC
[sigmove 00:12:18 DEBUG] transformed A4Mf.SPC -> A4MF.SPC
[Status 00:12:18 INFO] data for A4 transferred to science data processing
[Tidy 00:12:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:12:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:12:18 INFO] resetting WatchDogTimer
[Status 00:12:18 INFO] Starting Set [AERI set: name H4, 6 scans, 60 angle, D22500 command]
[Ingest 00:12:18 INFO] Sending XML status message
[Status 00:12:18 INFO] Mirror angle: 60
[Mirror 00:12:18 INFO] rotating to position H
[Status 00:12:19 INFO] .SET file for ACQ96 ready
[Ingest 00:12:19 INFO] Starting acquisition
[Status 00:12:19 INFO] reading housekeeping
[Status 00:12:37 INFO] acquire complete
[Status 00:12:37 INFO] writing housekeeping
[Sequencer 00:12:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:12:37 INFO] incremented H scene to 4 completed views
[Sequencer 00:12:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:12:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:12:37 INFO] incremented to [AERI set: name S4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:12:37 INFO] H4.SIG(18)
[sigmove 00:12:37 DEBUG] transformed H4Ma.SPC -> H4MA.SPC
[sigmove 00:12:37 DEBUG] transformed H4Mb.SPC -> H4MB.SPC
[sigmove 00:12:37 DEBUG] transformed H4Mc.SPC -> H4MC.SPC
[sigmove 00:12:37 DEBUG] transformed H4Md.SPC -> H4MD.SPC
[sigmove 00:12:37 DEBUG] transformed H4Me.SPC -> H4ME.SPC
[sigmove 00:12:37 DEBUG] transformed H4Mf.SPC -> H4MF.SPC
[Status 00:12:37 INFO] data for H4 transferred to science data processing
[Tidy 00:12:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:12:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:12:37 INFO] resetting WatchDogTimer
[Status 00:12:37 INFO] Starting Set [AERI set: name S4, 6 scans, 0 angle, D16300 command]
[Ingest 00:12:37 INFO] Sending XML status message
[Status 00:12:37 INFO] Mirror angle: 0
[Mirror 00:12:37 INFO] rotating to position S
[Status 00:12:38 INFO] .SET file for ACQ96 ready
[Ingest 00:12:38 INFO] Starting acquisition
[Status 00:12:38 INFO] reading housekeeping
[Status 00:12:56 INFO] acquire complete
[Status 00:12:56 INFO] writing housekeeping
[Sequencer 00:12:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:12:56 INFO] incremented S scene to 4 completed views
[Sequencer 00:12:56 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:12:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:12:56 INFO] incremented to [AERI set: name T4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:12:56 INFO] S4.SIG(18)
[sigmove 00:12:56 DEBUG] transformed S4Ma.SPC -> S4MA.SPC
[sigmove 00:12:56 DEBUG] transformed S4Mb.SPC -> S4MB.SPC
[sigmove 00:12:56 DEBUG] transformed S4Mc.SPC -> S4MC.SPC
[sigmove 00:12:56 DEBUG] transformed S4Md.SPC -> S4MD.SPC
[sigmove 00:12:56 DEBUG] transformed S4Me.SPC -> S4ME.SPC
[sigmove 00:12:56 DEBUG] transformed S4Mf.SPC -> S4MF.SPC
[Status 00:12:56 INFO] data for S4 transferred to science data processing
[Tidy 00:12:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:12:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:12:56 INFO] resetting WatchDogTimer
[Status 00:12:56 INFO] Starting Set [AERI set: name T4, 6 scans, 0 angle, D16300 command]
[Ingest 00:12:56 INFO] Sending XML status message
[Status 00:12:56 INFO] Mirror angle: 0
[Mirror 00:12:56 INFO] rotating to position T
[Status 00:12:56 INFO] .SET file for ACQ96 ready
[Ingest 00:12:57 INFO] Starting acquisition
[Status 00:12:57 INFO] reading housekeeping
[Status 00:13:15 INFO] acquire complete
[Status 00:13:15 INFO] writing housekeeping
[Sequencer 00:13:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:13:15 INFO] incremented T scene to 4 completed views
[Sequencer 00:13:15 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:13:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:13:15 INFO] incremented to [AERI set: name U4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:13:15 INFO] T4.SIG(18)
[sigmove 00:13:15 DEBUG] transformed T4Ma.SPC -> T4MA.SPC
[sigmove 00:13:15 DEBUG] transformed T4Mb.SPC -> T4MB.SPC
[sigmove 00:13:15 DEBUG] transformed T4Mc.SPC -> T4MC.SPC
[sigmove 00:13:15 DEBUG] transformed T4Md.SPC -> T4MD.SPC
[sigmove 00:13:15 DEBUG] transformed T4Me.SPC -> T4ME.SPC
[sigmove 00:13:15 DEBUG] transformed T4Mf.SPC -> T4MF.SPC
[Status 00:13:15 INFO] data for T4 transferred to science data processing
[Tidy 00:13:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:13:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:13:15 INFO] resetting WatchDogTimer
[Status 00:13:15 INFO] Starting Set [AERI set: name U4, 6 scans, 0 angle, D16300 command]
[Ingest 00:13:15 INFO] Sending XML status message
[Status 00:13:15 INFO] Mirror angle: 0
[Mirror 00:13:15 INFO] rotating to position U
[Status 00:13:16 INFO] .SET file for ACQ96 ready
[Ingest 00:13:16 INFO] Starting acquisition
[Status 00:13:16 INFO] reading housekeeping
[Status 00:13:34 INFO] acquire complete
[Status 00:13:34 INFO] writing housekeeping
[Sequencer 00:13:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:13:34 INFO] incremented U scene to 4 completed views
[Sequencer 00:13:34 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:13:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:13:34 INFO] incremented to [AERI set: name V4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:13:34 INFO] U4.SIG(18)
[sigmove 00:13:34 DEBUG] transformed U4Ma.SPC -> U4MA.SPC
[sigmove 00:13:34 DEBUG] transformed U4Mb.SPC -> U4MB.SPC
[sigmove 00:13:34 DEBUG] transformed U4Mc.SPC -> U4MC.SPC
[sigmove 00:13:34 DEBUG] transformed U4Md.SPC -> U4MD.SPC
[sigmove 00:13:34 DEBUG] transformed U4Me.SPC -> U4ME.SPC
[sigmove 00:13:34 DEBUG] transformed U4Mf.SPC -> U4MF.SPC
[Status 00:13:34 INFO] data for U4 transferred to science data processing
[Tidy 00:13:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:13:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:13:34 INFO] resetting WatchDogTimer
[Status 00:13:34 INFO] Starting Set [AERI set: name V4, 6 scans, 0 angle, D16300 command]
[Ingest 00:13:34 INFO] Sending XML status message
[Status 00:13:34 INFO] Mirror angle: 0
[Mirror 00:13:34 INFO] rotating to position V
[Status 00:13:35 INFO] .SET file for ACQ96 ready
[Ingest 00:13:35 INFO] Starting acquisition
[Status 00:13:35 INFO] reading housekeeping
[Status 00:13:53 INFO] acquire complete
[Status 00:13:53 INFO] writing housekeeping
[Sequencer 00:13:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:13:53 INFO] incremented V scene to 4 completed views
[Sequencer 00:13:53 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:13:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:13:53 INFO] incremented to [AERI set: name W4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:13:53 INFO] V4.SIG(18)
[sigmove 00:13:53 DEBUG] transformed V4Ma.SPC -> V4MA.SPC
[sigmove 00:13:53 DEBUG] transformed V4Mb.SPC -> V4MB.SPC
[sigmove 00:13:53 DEBUG] transformed V4Mc.SPC -> V4MC.SPC
[sigmove 00:13:53 DEBUG] transformed V4Md.SPC -> V4MD.SPC
[sigmove 00:13:53 DEBUG] transformed V4Me.SPC -> V4ME.SPC
[sigmove 00:13:53 DEBUG] transformed V4Mf.SPC -> V4MF.SPC
[Status 00:13:53 INFO] data for V4 transferred to science data processing
[Tidy 00:13:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:13:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:13:53 INFO] resetting WatchDogTimer
[Status 00:13:53 INFO] Starting Set [AERI set: name W4, 6 scans, 0 angle, D16300 command]
[Ingest 00:13:53 INFO] Sending XML status message
[Status 00:13:53 INFO] Mirror angle: 0
[Mirror 00:13:54 INFO] rotating to position W
[Status 00:13:54 INFO] .SET file for ACQ96 ready
[Ingest 00:13:54 INFO] Starting acquisition
[Status 00:13:54 INFO] reading housekeeping
[Status 00:14:12 INFO] acquire complete
[Status 00:14:12 INFO] writing housekeeping
[Sequencer 00:14:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:14:12 INFO] incremented W scene to 4 completed views
[Sequencer 00:14:12 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:14:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:14:12 INFO] incremented to [AERI set: name X4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:14:12 INFO] W4.SIG(18)
[sigmove 00:14:12 DEBUG] transformed W4Ma.SPC -> W4MA.SPC
[sigmove 00:14:12 DEBUG] transformed W4Mb.SPC -> W4MB.SPC
[sigmove 00:14:12 DEBUG] transformed W4Mc.SPC -> W4MC.SPC
[sigmove 00:14:12 DEBUG] transformed W4Md.SPC -> W4MD.SPC
[sigmove 00:14:12 DEBUG] transformed W4Me.SPC -> W4ME.SPC
[sigmove 00:14:12 DEBUG] transformed W4Mf.SPC -> W4MF.SPC
[Status 00:14:12 INFO] data for W4 transferred to science data processing
[Tidy 00:14:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:14:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:14:12 INFO] resetting WatchDogTimer
[Status 00:14:13 INFO] Starting Set [AERI set: name X4, 6 scans, 0 angle, D16300 command]
[Ingest 00:14:13 INFO] Sending XML status message
[Status 00:14:13 INFO] Mirror angle: 0
[Mirror 00:14:13 INFO] rotating to position X
[Status 00:14:13 INFO] .SET file for ACQ96 ready
[Ingest 00:14:13 INFO] Starting acquisition
[Status 00:14:13 INFO] reading housekeeping
[Status 00:14:31 INFO] acquire complete
[Status 00:14:32 INFO] writing housekeeping
[Sequencer 00:14:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:14:32 INFO] incremented X scene to 4 completed views
[Sequencer 00:14:32 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:14:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:14:32 INFO] incremented to [AERI set: name Y4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:14:32 INFO] X4.SIG(18)
[sigmove 00:14:32 DEBUG] transformed X4Ma.SPC -> X4MA.SPC
[sigmove 00:14:32 DEBUG] transformed X4Mb.SPC -> X4MB.SPC
[sigmove 00:14:32 DEBUG] transformed X4Mc.SPC -> X4MC.SPC
[sigmove 00:14:32 DEBUG] transformed X4Md.SPC -> X4MD.SPC
[sigmove 00:14:32 DEBUG] transformed X4Me.SPC -> X4ME.SPC
[sigmove 00:14:32 DEBUG] transformed X4Mf.SPC -> X4MF.SPC
[Status 00:14:32 INFO] data for X4 transferred to science data processing
[Tidy 00:14:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:14:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:14:32 INFO] resetting WatchDogTimer
[Status 00:14:32 INFO] Starting Set [AERI set: name Y4, 6 scans, 0 angle, D16300 command]
[Ingest 00:14:32 INFO] Sending XML status message
[Status 00:14:32 INFO] Mirror angle: 0
[Mirror 00:14:32 INFO] rotating to position Y
[Status 00:14:32 INFO] .SET file for ACQ96 ready
[Ingest 00:14:32 INFO] Starting acquisition
[Status 00:14:32 INFO] reading housekeeping
[Status 00:14:50 INFO] acquire complete
[Status 00:14:51 INFO] writing housekeeping
[Sequencer 00:14:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:14:51 INFO] incremented Y scene to 4 completed views
[Sequencer 00:14:51 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:14:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:14:51 INFO] incremented to [AERI set: name Z4, 6 scans, 0 angle, D16300 command] set
[sigmove 00:14:51 INFO] Y4.SIG(18)
[sigmove 00:14:51 DEBUG] transformed Y4Ma.SPC -> Y4MA.SPC
[sigmove 00:14:51 DEBUG] transformed Y4Mb.SPC -> Y4MB.SPC
[sigmove 00:14:51 DEBUG] transformed Y4Mc.SPC -> Y4MC.SPC
[sigmove 00:14:51 DEBUG] transformed Y4Md.SPC -> Y4MD.SPC
[sigmove 00:14:51 DEBUG] transformed Y4Me.SPC -> Y4ME.SPC
[sigmove 00:14:51 DEBUG] transformed Y4Mf.SPC -> Y4MF.SPC
[Status 00:14:51 INFO] data for Y4 transferred to science data processing
[Tidy 00:14:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:14:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:14:51 INFO] resetting WatchDogTimer
[Status 00:14:51 INFO] Starting Set [AERI set: name Z4, 6 scans, 0 angle, D16300 command]
[Ingest 00:14:51 INFO] Sending XML status message
[Status 00:14:51 INFO] Mirror angle: 0
[Mirror 00:14:51 INFO] rotating to position Z
[Status 00:14:51 INFO] .SET file for ACQ96 ready
[Ingest 00:14:51 INFO] Starting acquisition
[Status 00:14:51 INFO] reading housekeeping
[Status 00:15:09 INFO] acquire complete
[Status 00:15:10 INFO] writing housekeeping
[Sequencer 00:15:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:15:10 INFO] incremented Z scene to 4 completed views
[Sequencer 00:15:10 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:15:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:15:10 INFO] incremented to [AERI set: name H5, 6 scans, 60 angle, D22500 command] set
[sigmove 00:15:10 INFO] Z4.SIG(18)
[sigmove 00:15:10 DEBUG] transformed Z4Ma.SPC -> Z4MA.SPC
[sigmove 00:15:10 DEBUG] transformed Z4Mb.SPC -> Z4MB.SPC
[sigmove 00:15:10 DEBUG] transformed Z4Mc.SPC -> Z4MC.SPC
[sigmove 00:15:10 DEBUG] transformed Z4Md.SPC -> Z4MD.SPC
[sigmove 00:15:10 DEBUG] transformed Z4Me.SPC -> Z4ME.SPC
[sigmove 00:15:10 DEBUG] transformed Z4Mf.SPC -> Z4MF.SPC
[Status 00:15:10 INFO] data for Z4 transferred to science data processing
[Tidy 00:15:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:15:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:15:10 INFO] resetting WatchDogTimer
[Status 00:15:10 INFO] Starting Set [AERI set: name H5, 6 scans, 60 angle, D22500 command]
[Ingest 00:15:10 INFO] Sending XML status message
[Status 00:15:10 INFO] Mirror angle: 60
[Mirror 00:15:10 INFO] rotating to position H
[Status 00:15:11 INFO] .SET file for ACQ96 ready
[Ingest 00:15:11 INFO] Starting acquisition
[Status 00:15:11 INFO] reading housekeeping
[Status 00:15:29 INFO] acquire complete
[Status 00:15:29 INFO] writing housekeeping
[Sequencer 00:15:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:15:29 INFO] incremented H scene to 5 completed views
[Sequencer 00:15:29 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:15:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:15:29 INFO] incremented to [AERI set: name A5, 6 scans, 120 angle, D28300 command] set
[sigmove 00:15:29 INFO] H5.SIG(18)
[sigmove 00:15:29 DEBUG] transformed H5Ma.SPC -> H5MA.SPC
[sigmove 00:15:29 DEBUG] transformed H5Mb.SPC -> H5MB.SPC
[sigmove 00:15:29 DEBUG] transformed H5Mc.SPC -> H5MC.SPC
[sigmove 00:15:29 DEBUG] transformed H5Md.SPC -> H5MD.SPC
[sigmove 00:15:29 DEBUG] transformed H5Me.SPC -> H5ME.SPC
[sigmove 00:15:29 DEBUG] transformed H5Mf.SPC -> H5MF.SPC
[Status 00:15:29 INFO] data for H5 transferred to science data processing
[Tidy 00:15:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:15:29 INFO] A3.FIN(19),H3.FIN(19),S3.FIN(19),T3.FIN(19),U3.FIN(19),V3.FIN(19),W3.FIN(19),X3.FIN(19),Y3.FIN(19),Z3.FIN(19),A4.FIN(19),H4.FIN(19),S4.FIN(19),T4.FIN(19),U4.FIN(19),V4.FIN(19),W4.FIN(19),X4.FIN(19),Y4.FIN(19),Z4.FIN(19)
[sigmove 00:15:29 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:15:29 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:15:29 DEBUG] done zipping
[WatchDog 00:15:29 INFO] resetting WatchDogTimer
[Status 00:15:29 INFO] Starting Set [AERI set: name A5, 6 scans, 120 angle, D28300 command]
[Ingest 00:15:29 INFO] Sending XML status message
[Status 00:15:29 INFO] Mirror angle: 120
[Mirror 00:15:29 INFO] rotating to position A
[Status 00:15:30 INFO] .SET file for ACQ96 ready
[Ingest 00:15:30 INFO] Starting acquisition
[Status 00:15:30 INFO] reading housekeeping
[Status 00:15:48 INFO] acquire complete
[Status 00:15:48 INFO] writing housekeeping
[Sequencer 00:15:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:15:48 INFO] incremented A scene to 5 completed views
[Sequencer 00:15:48 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:15:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:15:48 INFO] incremented to [AERI set: name S5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:15:48 INFO] A5.SIG(18)
[sigmove 00:15:48 DEBUG] transformed A5Ma.SPC -> A5MA.SPC
[sigmove 00:15:48 DEBUG] transformed A5Mb.SPC -> A5MB.SPC
[sigmove 00:15:48 DEBUG] transformed A5Mc.SPC -> A5MC.SPC
[sigmove 00:15:48 DEBUG] transformed A5Md.SPC -> A5MD.SPC
[sigmove 00:15:48 DEBUG] transformed A5Me.SPC -> A5ME.SPC
[sigmove 00:15:48 DEBUG] transformed A5Mf.SPC -> A5MF.SPC
[Status 00:15:48 INFO] data for A5 transferred to science data processing
[Tidy 00:15:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:15:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:15:48 INFO] resetting WatchDogTimer
[Status 00:15:48 INFO] Starting Set [AERI set: name S5, 6 scans, 0 angle, D16300 command]
[Ingest 00:15:48 INFO] Sending XML status message
[Status 00:15:48 INFO] Mirror angle: 0
[Mirror 00:15:48 INFO] rotating to position S
[Status 00:15:49 INFO] .SET file for ACQ96 ready
[Ingest 00:15:49 INFO] Starting acquisition
[Status 00:15:49 INFO] reading housekeeping
[Status 00:16:08 INFO] acquire complete
[Status 00:16:08 INFO] writing housekeeping
[Sequencer 00:16:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:16:08 INFO] incremented S scene to 5 completed views
[Sequencer 00:16:08 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:16:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:16:08 INFO] incremented to [AERI set: name T5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:16:08 INFO] S5.SIG(18)
[sigmove 00:16:08 DEBUG] transformed S5Ma.SPC -> S5MA.SPC
[sigmove 00:16:08 DEBUG] transformed S5Mb.SPC -> S5MB.SPC
[sigmove 00:16:08 DEBUG] transformed S5Mc.SPC -> S5MC.SPC
[sigmove 00:16:08 DEBUG] transformed S5Md.SPC -> S5MD.SPC
[sigmove 00:16:08 DEBUG] transformed S5Me.SPC -> S5ME.SPC
[sigmove 00:16:08 DEBUG] transformed S5Mf.SPC -> S5MF.SPC
[Status 00:16:08 INFO] data for S5 transferred to science data processing
[Tidy 00:16:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:16:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:16:08 INFO] resetting WatchDogTimer
[Status 00:16:08 INFO] Starting Set [AERI set: name T5, 6 scans, 0 angle, D16300 command]
[Ingest 00:16:08 INFO] Sending XML status message
[Status 00:16:08 INFO] Mirror angle: 0
[Mirror 00:16:08 INFO] rotating to position T
[Status 00:16:08 INFO] .SET file for ACQ96 ready
[Ingest 00:16:08 INFO] Starting acquisition
[Status 00:16:09 INFO] reading housekeeping
[Status 00:16:27 INFO] acquire complete
[Status 00:16:27 INFO] writing housekeeping
[Sequencer 00:16:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:16:27 INFO] incremented T scene to 5 completed views
[Sequencer 00:16:27 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:16:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:16:27 INFO] incremented to [AERI set: name U5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:16:27 INFO] T5.SIG(18)
[sigmove 00:16:27 DEBUG] transformed T5Ma.SPC -> T5MA.SPC
[sigmove 00:16:27 DEBUG] transformed T5Mb.SPC -> T5MB.SPC
[sigmove 00:16:27 DEBUG] transformed T5Mc.SPC -> T5MC.SPC
[sigmove 00:16:27 DEBUG] transformed T5Md.SPC -> T5MD.SPC
[sigmove 00:16:27 DEBUG] transformed T5Me.SPC -> T5ME.SPC
[sigmove 00:16:27 DEBUG] transformed T5Mf.SPC -> T5MF.SPC
[Status 00:16:27 INFO] data for T5 transferred to science data processing
[Tidy 00:16:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:16:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:16:27 INFO] resetting WatchDogTimer
[Status 00:16:27 INFO] Starting Set [AERI set: name U5, 6 scans, 0 angle, D16300 command]
[Ingest 00:16:27 INFO] Sending XML status message
[Status 00:16:27 INFO] Mirror angle: 0
[Mirror 00:16:27 INFO] rotating to position U
[Status 00:16:27 INFO] .SET file for ACQ96 ready
[Ingest 00:16:28 INFO] Starting acquisition
[Status 00:16:28 INFO] reading housekeeping
[Status 00:16:46 INFO] acquire complete
[Status 00:16:46 INFO] writing housekeeping
[Sequencer 00:16:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:16:46 INFO] incremented U scene to 5 completed views
[Sequencer 00:16:46 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:16:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:16:46 INFO] incremented to [AERI set: name V5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:16:46 INFO] U5.SIG(18)
[sigmove 00:16:46 DEBUG] transformed U5Ma.SPC -> U5MA.SPC
[sigmove 00:16:46 DEBUG] transformed U5Mb.SPC -> U5MB.SPC
[sigmove 00:16:46 DEBUG] transformed U5Mc.SPC -> U5MC.SPC
[sigmove 00:16:46 DEBUG] transformed U5Md.SPC -> U5MD.SPC
[sigmove 00:16:46 DEBUG] transformed U5Me.SPC -> U5ME.SPC
[sigmove 00:16:46 DEBUG] transformed U5Mf.SPC -> U5MF.SPC
[Status 00:16:46 INFO] data for U5 transferred to science data processing
[Tidy 00:16:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:16:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:16:46 INFO] resetting WatchDogTimer
[Status 00:16:46 INFO] Starting Set [AERI set: name V5, 6 scans, 0 angle, D16300 command]
[Ingest 00:16:46 INFO] Sending XML status message
[Status 00:16:46 INFO] Mirror angle: 0
[Mirror 00:16:46 INFO] rotating to position V
[Status 00:16:47 INFO] .SET file for ACQ96 ready
[Ingest 00:16:47 INFO] Starting acquisition
[Status 00:16:47 INFO] reading housekeeping
[Status 00:17:05 INFO] acquire complete
[Status 00:17:05 INFO] writing housekeeping
[Sequencer 00:17:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:17:05 INFO] incremented V scene to 5 completed views
[Sequencer 00:17:05 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:17:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:17:05 INFO] incremented to [AERI set: name W5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:17:05 INFO] V5.SIG(18)
[sigmove 00:17:05 DEBUG] transformed V5Ma.SPC -> V5MA.SPC
[sigmove 00:17:05 DEBUG] transformed V5Mb.SPC -> V5MB.SPC
[sigmove 00:17:05 DEBUG] transformed V5Mc.SPC -> V5MC.SPC
[sigmove 00:17:05 DEBUG] transformed V5Md.SPC -> V5MD.SPC
[sigmove 00:17:05 DEBUG] transformed V5Me.SPC -> V5ME.SPC
[sigmove 00:17:05 DEBUG] transformed V5Mf.SPC -> V5MF.SPC
[Status 00:17:05 INFO] data for V5 transferred to science data processing
[Tidy 00:17:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:17:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:17:05 INFO] resetting WatchDogTimer
[Status 00:17:05 INFO] Starting Set [AERI set: name W5, 6 scans, 0 angle, D16300 command]
[Ingest 00:17:05 INFO] Sending XML status message
[Status 00:17:05 INFO] Mirror angle: 0
[Mirror 00:17:05 INFO] rotating to position W
[Status 00:17:06 INFO] .SET file for ACQ96 ready
[Ingest 00:17:06 INFO] Starting acquisition
[Status 00:17:06 INFO] reading housekeeping
[Status 00:17:24 INFO] acquire complete
[Status 00:17:24 INFO] writing housekeeping
[Sequencer 00:17:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:17:24 INFO] incremented W scene to 5 completed views
[Sequencer 00:17:24 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:17:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:17:24 INFO] incremented to [AERI set: name X5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:17:24 INFO] W5.SIG(18)
[sigmove 00:17:24 DEBUG] transformed W5Ma.SPC -> W5MA.SPC
[sigmove 00:17:24 DEBUG] transformed W5Mb.SPC -> W5MB.SPC
[sigmove 00:17:24 DEBUG] transformed W5Mc.SPC -> W5MC.SPC
[sigmove 00:17:24 DEBUG] transformed W5Md.SPC -> W5MD.SPC
[sigmove 00:17:24 DEBUG] transformed W5Me.SPC -> W5ME.SPC
[sigmove 00:17:24 DEBUG] transformed W5Mf.SPC -> W5MF.SPC
[Status 00:17:24 INFO] data for W5 transferred to science data processing
[Tidy 00:17:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:17:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:17:24 INFO] resetting WatchDogTimer
[Status 00:17:25 INFO] Starting Set [AERI set: name X5, 6 scans, 0 angle, D16300 command]
[Ingest 00:17:25 INFO] Sending XML status message
[Status 00:17:25 INFO] Mirror angle: 0
[Mirror 00:17:25 INFO] rotating to position X
[Status 00:17:25 INFO] .SET file for ACQ96 ready
[Ingest 00:17:25 INFO] Starting acquisition
[Status 00:17:25 INFO] reading housekeeping
[Status 00:17:43 INFO] acquire complete
[Status 00:17:44 INFO] writing housekeeping
[Sequencer 00:17:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:17:44 INFO] incremented X scene to 5 completed views
[Sequencer 00:17:44 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:17:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:17:44 INFO] incremented to [AERI set: name Y5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:17:44 INFO] X5.SIG(18)
[sigmove 00:17:44 DEBUG] transformed X5Ma.SPC -> X5MA.SPC
[sigmove 00:17:44 DEBUG] transformed X5Mb.SPC -> X5MB.SPC
[sigmove 00:17:44 DEBUG] transformed X5Mc.SPC -> X5MC.SPC
[sigmove 00:17:44 DEBUG] transformed X5Md.SPC -> X5MD.SPC
[sigmove 00:17:44 DEBUG] transformed X5Me.SPC -> X5ME.SPC
[sigmove 00:17:44 DEBUG] transformed X5Mf.SPC -> X5MF.SPC
[Status 00:17:44 INFO] data for X5 transferred to science data processing
[Tidy 00:17:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:17:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:17:44 INFO] resetting WatchDogTimer
[Status 00:17:44 INFO] Starting Set [AERI set: name Y5, 6 scans, 0 angle, D16300 command]
[Ingest 00:17:44 INFO] Sending XML status message
[Status 00:17:44 INFO] Mirror angle: 0
[Mirror 00:17:44 INFO] rotating to position Y
[Status 00:17:44 INFO] .SET file for ACQ96 ready
[Ingest 00:17:44 INFO] Starting acquisition
[Status 00:17:44 INFO] reading housekeeping
[Status 00:18:02 INFO] acquire complete
[Status 00:18:03 INFO] writing housekeeping
[Sequencer 00:18:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:18:03 INFO] incremented Y scene to 5 completed views
[Sequencer 00:18:03 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:18:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:18:03 INFO] incremented to [AERI set: name Z5, 6 scans, 0 angle, D16300 command] set
[sigmove 00:18:03 INFO] Y5.SIG(18)
[sigmove 00:18:03 DEBUG] transformed Y5Ma.SPC -> Y5MA.SPC
[sigmove 00:18:03 DEBUG] transformed Y5Mb.SPC -> Y5MB.SPC
[sigmove 00:18:03 DEBUG] transformed Y5Mc.SPC -> Y5MC.SPC
[sigmove 00:18:03 DEBUG] transformed Y5Md.SPC -> Y5MD.SPC
[sigmove 00:18:03 DEBUG] transformed Y5Me.SPC -> Y5ME.SPC
[sigmove 00:18:03 DEBUG] transformed Y5Mf.SPC -> Y5MF.SPC
[Status 00:18:03 INFO] data for Y5 transferred to science data processing
[Tidy 00:18:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:18:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:18:03 INFO] resetting WatchDogTimer
[Status 00:18:03 INFO] Starting Set [AERI set: name Z5, 6 scans, 0 angle, D16300 command]
[Ingest 00:18:03 INFO] Sending XML status message
[Status 00:18:03 INFO] Mirror angle: 0
[Mirror 00:18:03 INFO] rotating to position Z
[Status 00:18:03 INFO] .SET file for ACQ96 ready
[Ingest 00:18:03 INFO] Starting acquisition
[Status 00:18:03 INFO] reading housekeeping
[Status 00:18:21 INFO] acquire complete
[Status 00:18:22 INFO] writing housekeeping
[Sequencer 00:18:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:18:22 INFO] incremented Z scene to 5 completed views
[Sequencer 00:18:22 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:18:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:18:22 INFO] incremented to [AERI set: name A6, 6 scans, 120 angle, D28300 command] set
[sigmove 00:18:22 INFO] Z5.SIG(18)
[sigmove 00:18:22 DEBUG] transformed Z5Ma.SPC -> Z5MA.SPC
[sigmove 00:18:22 DEBUG] transformed Z5Mb.SPC -> Z5MB.SPC
[sigmove 00:18:22 DEBUG] transformed Z5Mc.SPC -> Z5MC.SPC
[sigmove 00:18:22 DEBUG] transformed Z5Md.SPC -> Z5MD.SPC
[sigmove 00:18:22 DEBUG] transformed Z5Me.SPC -> Z5ME.SPC
[sigmove 00:18:22 DEBUG] transformed Z5Mf.SPC -> Z5MF.SPC
[Status 00:18:22 INFO] data for Z5 transferred to science data processing
[Tidy 00:18:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:18:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:18:22 INFO] resetting WatchDogTimer
[Status 00:18:22 INFO] Starting Set [AERI set: name A6, 6 scans, 120 angle, D28300 command]
[Ingest 00:18:22 INFO] Sending XML status message
[Status 00:18:22 INFO] Mirror angle: 120
[Mirror 00:18:22 INFO] rotating to position A
[Status 00:18:23 INFO] .SET file for ACQ96 ready
[Ingest 00:18:23 INFO] Starting acquisition
[Status 00:18:23 INFO] reading housekeeping
[Status 00:18:42 INFO] acquire complete
[Status 00:18:42 INFO] writing housekeeping
[Sequencer 00:18:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:18:42 INFO] incremented A scene to 6 completed views
[Sequencer 00:18:42 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:18:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:18:42 INFO] incremented to [AERI set: name H6, 6 scans, 60 angle, D22500 command] set
[sigmove 00:18:42 INFO] A6.SIG(18)
[sigmove 00:18:42 DEBUG] transformed A6Ma.SPC -> A6MA.SPC
[sigmove 00:18:42 DEBUG] transformed A6Mb.SPC -> A6MB.SPC
[sigmove 00:18:42 DEBUG] transformed A6Mc.SPC -> A6MC.SPC
[sigmove 00:18:42 DEBUG] transformed A6Md.SPC -> A6MD.SPC
[sigmove 00:18:42 DEBUG] transformed A6Me.SPC -> A6ME.SPC
[sigmove 00:18:42 DEBUG] transformed A6Mf.SPC -> A6MF.SPC
[Status 00:18:42 INFO] data for A6 transferred to science data processing
[Tidy 00:18:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:18:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:18:42 INFO] resetting WatchDogTimer
[Status 00:18:42 INFO] Starting Set [AERI set: name H6, 6 scans, 60 angle, D22500 command]
[Ingest 00:18:42 INFO] Sending XML status message
[Status 00:18:42 INFO] Mirror angle: 60
[Mirror 00:18:42 INFO] rotating to position H
[Status 00:18:43 INFO] .SET file for ACQ96 ready
[Ingest 00:18:43 INFO] Starting acquisition
[Status 00:18:43 INFO] reading housekeeping
[Status 00:19:01 INFO] acquire complete
[Status 00:19:01 INFO] writing housekeeping
[Sequencer 00:19:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:19:01 INFO] incremented H scene to 6 completed views
[Sequencer 00:19:01 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:19:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:19:01 INFO] incremented to [AERI set: name S6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:19:01 INFO] H6.SIG(18)
[sigmove 00:19:01 DEBUG] transformed H6Ma.SPC -> H6MA.SPC
[sigmove 00:19:01 DEBUG] transformed H6Mb.SPC -> H6MB.SPC
[sigmove 00:19:01 DEBUG] transformed H6Mc.SPC -> H6MC.SPC
[sigmove 00:19:01 DEBUG] transformed H6Md.SPC -> H6MD.SPC
[sigmove 00:19:01 DEBUG] transformed H6Me.SPC -> H6ME.SPC
[sigmove 00:19:01 DEBUG] transformed H6Mf.SPC -> H6MF.SPC
[Status 00:19:01 INFO] data for H6 transferred to science data processing
[Tidy 00:19:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:19:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:19:01 INFO] resetting WatchDogTimer
[Status 00:19:01 INFO] Starting Set [AERI set: name S6, 6 scans, 0 angle, D16300 command]
[Ingest 00:19:01 INFO] Sending XML status message
[Status 00:19:01 INFO] Mirror angle: 0
[Mirror 00:19:01 INFO] rotating to position S
[Status 00:19:02 INFO] .SET file for ACQ96 ready
[Ingest 00:19:02 INFO] Starting acquisition
[Status 00:19:02 INFO] reading housekeeping
[Status 00:19:20 INFO] acquire complete
[Status 00:19:20 INFO] writing housekeeping
[Sequencer 00:19:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:19:20 INFO] incremented S scene to 6 completed views
[Sequencer 00:19:20 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:19:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:19:20 INFO] incremented to [AERI set: name T6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:19:20 INFO] S6.SIG(18)
[sigmove 00:19:20 DEBUG] transformed S6Ma.SPC -> S6MA.SPC
[sigmove 00:19:20 DEBUG] transformed S6Mb.SPC -> S6MB.SPC
[sigmove 00:19:20 DEBUG] transformed S6Mc.SPC -> S6MC.SPC
[sigmove 00:19:20 DEBUG] transformed S6Md.SPC -> S6MD.SPC
[sigmove 00:19:20 DEBUG] transformed S6Me.SPC -> S6ME.SPC
[sigmove 00:19:20 DEBUG] transformed S6Mf.SPC -> S6MF.SPC
[Status 00:19:20 INFO] data for S6 transferred to science data processing
[Tidy 00:19:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:19:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:19:20 INFO] resetting WatchDogTimer
[Status 00:19:20 INFO] Starting Set [AERI set: name T6, 6 scans, 0 angle, D16300 command]
[Ingest 00:19:20 INFO] Sending XML status message
[Status 00:19:20 INFO] Mirror angle: 0
[Mirror 00:19:20 INFO] rotating to position T
[Status 00:19:20 INFO] .SET file for ACQ96 ready
[Ingest 00:19:20 INFO] Starting acquisition
[Status 00:19:21 INFO] reading housekeeping
[Status 00:19:39 INFO] acquire complete
[Status 00:19:39 INFO] writing housekeeping
[Sequencer 00:19:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:19:39 INFO] incremented T scene to 6 completed views
[Sequencer 00:19:39 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:19:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:19:39 INFO] incremented to [AERI set: name U6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:19:39 INFO] T6.SIG(18)
[sigmove 00:19:39 DEBUG] transformed T6Ma.SPC -> T6MA.SPC
[sigmove 00:19:39 DEBUG] transformed T6Mb.SPC -> T6MB.SPC
[sigmove 00:19:39 DEBUG] transformed T6Mc.SPC -> T6MC.SPC
[sigmove 00:19:39 DEBUG] transformed T6Md.SPC -> T6MD.SPC
[sigmove 00:19:39 DEBUG] transformed T6Me.SPC -> T6ME.SPC
[sigmove 00:19:39 DEBUG] transformed T6Mf.SPC -> T6MF.SPC
[Status 00:19:39 INFO] data for T6 transferred to science data processing
[Tidy 00:19:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:19:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:19:39 INFO] resetting WatchDogTimer
[Status 00:19:39 INFO] Starting Set [AERI set: name U6, 6 scans, 0 angle, D16300 command]
[Ingest 00:19:39 INFO] Sending XML status message
[Status 00:19:39 INFO] Mirror angle: 0
[Mirror 00:19:39 INFO] rotating to position U
[Status 00:19:40 INFO] .SET file for ACQ96 ready
[Ingest 00:19:40 INFO] Starting acquisition
[Status 00:19:40 INFO] reading housekeeping
[Status 00:19:58 INFO] acquire complete
[Status 00:19:58 INFO] writing housekeeping
[Sequencer 00:19:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:19:58 INFO] incremented U scene to 6 completed views
[Sequencer 00:19:58 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:19:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:19:58 INFO] incremented to [AERI set: name V6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:19:58 INFO] U6.SIG(18)
[sigmove 00:19:58 DEBUG] transformed U6Ma.SPC -> U6MA.SPC
[sigmove 00:19:58 DEBUG] transformed U6Mb.SPC -> U6MB.SPC
[sigmove 00:19:58 DEBUG] transformed U6Mc.SPC -> U6MC.SPC
[sigmove 00:19:58 DEBUG] transformed U6Md.SPC -> U6MD.SPC
[sigmove 00:19:58 DEBUG] transformed U6Me.SPC -> U6ME.SPC
[sigmove 00:19:58 DEBUG] transformed U6Mf.SPC -> U6MF.SPC
[Status 00:19:58 INFO] data for U6 transferred to science data processing
[Tidy 00:19:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:19:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:19:58 INFO] resetting WatchDogTimer
[Status 00:19:58 INFO] Starting Set [AERI set: name V6, 6 scans, 0 angle, D16300 command]
[Ingest 00:19:58 INFO] Sending XML status message
[Status 00:19:58 INFO] Mirror angle: 0
[Mirror 00:19:58 INFO] rotating to position V
[Status 00:19:59 INFO] .SET file for ACQ96 ready
[Ingest 00:19:59 INFO] Starting acquisition
[Status 00:19:59 INFO] reading housekeeping
[Status 00:20:17 INFO] acquire complete
[Status 00:20:17 INFO] writing housekeeping
[Sequencer 00:20:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:20:17 INFO] incremented V scene to 6 completed views
[Sequencer 00:20:17 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:20:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:20:17 INFO] incremented to [AERI set: name W6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:20:17 INFO] V6.SIG(18)
[sigmove 00:20:17 DEBUG] transformed V6Ma.SPC -> V6MA.SPC
[sigmove 00:20:17 DEBUG] transformed V6Mb.SPC -> V6MB.SPC
[sigmove 00:20:17 DEBUG] transformed V6Mc.SPC -> V6MC.SPC
[sigmove 00:20:17 DEBUG] transformed V6Md.SPC -> V6MD.SPC
[sigmove 00:20:17 DEBUG] transformed V6Me.SPC -> V6ME.SPC
[sigmove 00:20:17 DEBUG] transformed V6Mf.SPC -> V6MF.SPC
[Status 00:20:17 INFO] data for V6 transferred to science data processing
[Tidy 00:20:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:20:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:20:17 INFO] resetting WatchDogTimer
[Status 00:20:17 INFO] Starting Set [AERI set: name W6, 6 scans, 0 angle, D16300 command]
[Ingest 00:20:17 INFO] Sending XML status message
[Status 00:20:17 INFO] Mirror angle: 0
[Mirror 00:20:18 INFO] rotating to position W
[Status 00:20:18 INFO] .SET file for ACQ96 ready
[Ingest 00:20:18 INFO] Starting acquisition
[Status 00:20:18 INFO] reading housekeeping
[Status 00:20:36 INFO] acquire complete
[Status 00:20:36 INFO] writing housekeeping
[Sequencer 00:20:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:20:36 INFO] incremented W scene to 6 completed views
[Sequencer 00:20:36 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:20:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:20:36 INFO] incremented to [AERI set: name X6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:20:36 INFO] W6.SIG(18)
[sigmove 00:20:36 DEBUG] transformed W6Ma.SPC -> W6MA.SPC
[sigmove 00:20:36 DEBUG] transformed W6Mb.SPC -> W6MB.SPC
[sigmove 00:20:36 DEBUG] transformed W6Mc.SPC -> W6MC.SPC
[sigmove 00:20:36 DEBUG] transformed W6Md.SPC -> W6MD.SPC
[sigmove 00:20:36 DEBUG] transformed W6Me.SPC -> W6ME.SPC
[sigmove 00:20:36 DEBUG] transformed W6Mf.SPC -> W6MF.SPC
[Status 00:20:36 INFO] data for W6 transferred to science data processing
[Tidy 00:20:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:20:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:20:36 INFO] resetting WatchDogTimer
[Status 00:20:37 INFO] Starting Set [AERI set: name X6, 6 scans, 0 angle, D16300 command]
[Ingest 00:20:37 INFO] Sending XML status message
[Status 00:20:37 INFO] Mirror angle: 0
[Mirror 00:20:37 INFO] rotating to position X
[Status 00:20:37 INFO] .SET file for ACQ96 ready
[Ingest 00:20:37 INFO] Starting acquisition
[Status 00:20:37 INFO] reading housekeeping
[Status 00:20:55 INFO] acquire complete
[Status 00:20:56 INFO] writing housekeeping
[Sequencer 00:20:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:20:56 INFO] incremented X scene to 6 completed views
[Sequencer 00:20:56 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:20:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:20:56 INFO] incremented to [AERI set: name Y6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:20:56 INFO] X6.SIG(18)
[sigmove 00:20:56 DEBUG] transformed X6Ma.SPC -> X6MA.SPC
[sigmove 00:20:56 DEBUG] transformed X6Mb.SPC -> X6MB.SPC
[sigmove 00:20:56 DEBUG] transformed X6Mc.SPC -> X6MC.SPC
[sigmove 00:20:56 DEBUG] transformed X6Md.SPC -> X6MD.SPC
[sigmove 00:20:56 DEBUG] transformed X6Me.SPC -> X6ME.SPC
[sigmove 00:20:56 DEBUG] transformed X6Mf.SPC -> X6MF.SPC
[Status 00:20:56 INFO] data for X6 transferred to science data processing
[Tidy 00:20:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:20:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:20:56 INFO] resetting WatchDogTimer
[Status 00:20:56 INFO] Starting Set [AERI set: name Y6, 6 scans, 0 angle, D16300 command]
[Ingest 00:20:56 INFO] Sending XML status message
[Status 00:20:56 INFO] Mirror angle: 0
[Mirror 00:20:56 INFO] rotating to position Y
[Status 00:20:56 INFO] .SET file for ACQ96 ready
[Ingest 00:20:56 INFO] Starting acquisition
[Status 00:20:56 INFO] reading housekeeping
[Status 00:21:14 INFO] acquire complete
[Status 00:21:15 INFO] writing housekeeping
[Sequencer 00:21:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:21:15 INFO] incremented Y scene to 6 completed views
[Sequencer 00:21:15 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:21:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:21:15 INFO] incremented to [AERI set: name Z6, 6 scans, 0 angle, D16300 command] set
[sigmove 00:21:15 INFO] Y6.SIG(18)
[sigmove 00:21:15 DEBUG] transformed Y6Ma.SPC -> Y6MA.SPC
[sigmove 00:21:15 DEBUG] transformed Y6Mb.SPC -> Y6MB.SPC
[sigmove 00:21:15 DEBUG] transformed Y6Mc.SPC -> Y6MC.SPC
[sigmove 00:21:15 DEBUG] transformed Y6Md.SPC -> Y6MD.SPC
[sigmove 00:21:15 DEBUG] transformed Y6Me.SPC -> Y6ME.SPC
[sigmove 00:21:15 DEBUG] transformed Y6Mf.SPC -> Y6MF.SPC
[Status 00:21:15 INFO] data for Y6 transferred to science data processing
[Tidy 00:21:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:21:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:21:15 INFO] resetting WatchDogTimer
[Status 00:21:15 INFO] Starting Set [AERI set: name Z6, 6 scans, 0 angle, D16300 command]
[Ingest 00:21:15 INFO] Sending XML status message
[Status 00:21:15 INFO] Mirror angle: 0
[Mirror 00:21:15 INFO] rotating to position Z
[Status 00:21:15 INFO] .SET file for ACQ96 ready
[Ingest 00:21:15 INFO] Starting acquisition
[Status 00:21:15 INFO] reading housekeeping
[Status 00:21:33 INFO] acquire complete
[Status 00:21:34 INFO] writing housekeeping
[Sequencer 00:21:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:21:34 INFO] incremented Z scene to 6 completed views
[Sequencer 00:21:34 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:21:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:21:34 INFO] incremented to [AERI set: name H7, 6 scans, 60 angle, D22500 command] set
[sigmove 00:21:34 INFO] Z6.SIG(18)
[sigmove 00:21:34 DEBUG] transformed Z6Ma.SPC -> Z6MA.SPC
[sigmove 00:21:34 DEBUG] transformed Z6Mb.SPC -> Z6MB.SPC
[sigmove 00:21:34 DEBUG] transformed Z6Mc.SPC -> Z6MC.SPC
[sigmove 00:21:34 DEBUG] transformed Z6Md.SPC -> Z6MD.SPC
[sigmove 00:21:34 DEBUG] transformed Z6Me.SPC -> Z6ME.SPC
[sigmove 00:21:34 DEBUG] transformed Z6Mf.SPC -> Z6MF.SPC
[Status 00:21:34 INFO] data for Z6 transferred to science data processing
[Tidy 00:21:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:21:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:21:34 INFO] resetting WatchDogTimer
[Status 00:21:34 INFO] Starting Set [AERI set: name H7, 6 scans, 60 angle, D22500 command]
[Ingest 00:21:34 INFO] Sending XML status message
[Status 00:21:34 INFO] Mirror angle: 60
[Mirror 00:21:34 INFO] rotating to position H
[Status 00:21:35 INFO] .SET file for ACQ96 ready
[Ingest 00:21:35 INFO] Starting acquisition
[Status 00:21:35 INFO] reading housekeeping
[Status 00:21:52 INFO] acquire complete
[Status 00:21:53 INFO] writing housekeeping
[Sequencer 00:21:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:21:53 INFO] incremented H scene to 7 completed views
[Sequencer 00:21:53 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:21:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:21:53 INFO] incremented to [AERI set: name A7, 6 scans, 120 angle, D28300 command] set
[sigmove 00:21:53 INFO] H7.SIG(18)
[sigmove 00:21:53 DEBUG] transformed H7Ma.SPC -> H7MA.SPC
[sigmove 00:21:53 DEBUG] transformed H7Mb.SPC -> H7MB.SPC
[sigmove 00:21:53 DEBUG] transformed H7Mc.SPC -> H7MC.SPC
[sigmove 00:21:53 DEBUG] transformed H7Md.SPC -> H7MD.SPC
[sigmove 00:21:53 DEBUG] transformed H7Me.SPC -> H7ME.SPC
[sigmove 00:21:53 DEBUG] transformed H7Mf.SPC -> H7MF.SPC
[Status 00:21:53 INFO] data for H7 transferred to science data processing
[Tidy 00:21:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:21:53 INFO] A5.FIN(19),H5.FIN(19),S5.FIN(19),T5.FIN(19),U5.FIN(19),V5.FIN(19),W5.FIN(19),X5.FIN(19),Y5.FIN(19),Z5.FIN(19),A6.FIN(19),H6.FIN(19),S6.FIN(19),T6.FIN(19),U6.FIN(19),V6.FIN(19),W6.FIN(19),X6.FIN(19),Y6.FIN(19),Z6.FIN(19)
[sigmove 00:21:53 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:21:53 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:21:53 DEBUG] done zipping
[WatchDog 00:21:53 INFO] resetting WatchDogTimer
[Status 00:21:53 INFO] Starting Set [AERI set: name A7, 6 scans, 120 angle, D28300 command]
[Ingest 00:21:53 INFO] Sending XML status message
[Status 00:21:53 INFO] Mirror angle: 120
[Mirror 00:21:53 INFO] rotating to position A
[Status 00:21:54 INFO] .SET file for ACQ96 ready
[Ingest 00:21:54 INFO] Starting acquisition
[Status 00:21:54 INFO] reading housekeeping
[Status 00:22:13 INFO] acquire complete
[Status 00:22:13 INFO] writing housekeeping
[Sequencer 00:22:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:22:13 INFO] incremented A scene to 7 completed views
[Sequencer 00:22:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:22:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:22:13 INFO] incremented to [AERI set: name S7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:22:13 INFO] A7.SIG(18)
[sigmove 00:22:13 DEBUG] transformed A7Ma.SPC -> A7MA.SPC
[sigmove 00:22:13 DEBUG] transformed A7Mb.SPC -> A7MB.SPC
[sigmove 00:22:13 DEBUG] transformed A7Mc.SPC -> A7MC.SPC
[sigmove 00:22:13 DEBUG] transformed A7Md.SPC -> A7MD.SPC
[sigmove 00:22:13 DEBUG] transformed A7Me.SPC -> A7ME.SPC
[sigmove 00:22:13 DEBUG] transformed A7Mf.SPC -> A7MF.SPC
[Status 00:22:13 INFO] data for A7 transferred to science data processing
[Tidy 00:22:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:22:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:22:13 INFO] resetting WatchDogTimer
[Status 00:22:13 INFO] Starting Set [AERI set: name S7, 6 scans, 0 angle, D16300 command]
[Ingest 00:22:13 INFO] Sending XML status message
[Status 00:22:13 INFO] Mirror angle: 0
[Mirror 00:22:13 INFO] rotating to position S
[Status 00:22:14 INFO] .SET file for ACQ96 ready
[Ingest 00:22:14 INFO] Starting acquisition
[Status 00:22:14 INFO] reading housekeeping
[Status 00:22:33 INFO] acquire complete
[Status 00:22:33 INFO] writing housekeeping
[Sequencer 00:22:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:22:33 INFO] incremented S scene to 7 completed views
[Sequencer 00:22:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:22:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:22:33 INFO] incremented to [AERI set: name T7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:22:33 INFO] S7.SIG(18)
[sigmove 00:22:33 DEBUG] transformed S7Ma.SPC -> S7MA.SPC
[sigmove 00:22:33 DEBUG] transformed S7Mb.SPC -> S7MB.SPC
[sigmove 00:22:33 DEBUG] transformed S7Mc.SPC -> S7MC.SPC
[sigmove 00:22:33 DEBUG] transformed S7Md.SPC -> S7MD.SPC
[sigmove 00:22:33 DEBUG] transformed S7Me.SPC -> S7ME.SPC
[sigmove 00:22:33 DEBUG] transformed S7Mf.SPC -> S7MF.SPC
[Status 00:22:33 INFO] data for S7 transferred to science data processing
[Tidy 00:22:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:22:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:22:33 INFO] resetting WatchDogTimer
[Status 00:22:33 INFO] Starting Set [AERI set: name T7, 6 scans, 0 angle, D16300 command]
[Ingest 00:22:33 INFO] Sending XML status message
[Status 00:22:33 INFO] Mirror angle: 0
[Mirror 00:22:33 INFO] rotating to position T
[Status 00:22:34 INFO] .SET file for ACQ96 ready
[Ingest 00:22:34 INFO] Starting acquisition
[Status 00:22:34 INFO] reading housekeeping
[Status 00:22:52 INFO] acquire complete
[Status 00:22:52 INFO] writing housekeeping
[Sequencer 00:22:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:22:52 INFO] incremented T scene to 7 completed views
[Sequencer 00:22:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:22:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:22:52 INFO] incremented to [AERI set: name U7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:22:52 INFO] T7.SIG(18)
[sigmove 00:22:52 DEBUG] transformed T7Ma.SPC -> T7MA.SPC
[sigmove 00:22:52 DEBUG] transformed T7Mb.SPC -> T7MB.SPC
[sigmove 00:22:52 DEBUG] transformed T7Mc.SPC -> T7MC.SPC
[sigmove 00:22:52 DEBUG] transformed T7Md.SPC -> T7MD.SPC
[sigmove 00:22:52 DEBUG] transformed T7Me.SPC -> T7ME.SPC
[sigmove 00:22:52 DEBUG] transformed T7Mf.SPC -> T7MF.SPC
[Status 00:22:52 INFO] data for T7 transferred to science data processing
[Tidy 00:22:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:22:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:22:52 INFO] resetting WatchDogTimer
[Status 00:22:52 INFO] Starting Set [AERI set: name U7, 6 scans, 0 angle, D16300 command]
[Ingest 00:22:52 INFO] Sending XML status message
[Status 00:22:52 INFO] Mirror angle: 0
[Mirror 00:22:52 INFO] rotating to position U
[Status 00:22:53 INFO] .SET file for ACQ96 ready
[Ingest 00:22:53 INFO] Starting acquisition
[Status 00:22:53 INFO] reading housekeeping
[Status 00:23:11 INFO] acquire complete
[Status 00:23:11 INFO] writing housekeeping
[Sequencer 00:23:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:23:11 INFO] incremented U scene to 7 completed views
[Sequencer 00:23:11 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:23:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:23:11 INFO] incremented to [AERI set: name V7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:23:11 INFO] U7.SIG(18)
[sigmove 00:23:11 DEBUG] transformed U7Ma.SPC -> U7MA.SPC
[sigmove 00:23:11 DEBUG] transformed U7Mb.SPC -> U7MB.SPC
[sigmove 00:23:11 DEBUG] transformed U7Mc.SPC -> U7MC.SPC
[sigmove 00:23:11 DEBUG] transformed U7Md.SPC -> U7MD.SPC
[sigmove 00:23:11 DEBUG] transformed U7Me.SPC -> U7ME.SPC
[sigmove 00:23:11 DEBUG] transformed U7Mf.SPC -> U7MF.SPC
[Status 00:23:11 INFO] data for U7 transferred to science data processing
[Tidy 00:23:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:23:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:23:11 INFO] resetting WatchDogTimer
[Status 00:23:11 INFO] Starting Set [AERI set: name V7, 6 scans, 0 angle, D16300 command]
[Ingest 00:23:11 INFO] Sending XML status message
[Status 00:23:11 INFO] Mirror angle: 0
[Mirror 00:23:12 INFO] rotating to position V
[Status 00:23:12 INFO] .SET file for ACQ96 ready
[Ingest 00:23:12 INFO] Starting acquisition
[Status 00:23:12 INFO] reading housekeeping
[Status 00:23:30 INFO] acquire complete
[Status 00:23:30 INFO] writing housekeeping
[Sequencer 00:23:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:23:30 INFO] incremented V scene to 7 completed views
[Sequencer 00:23:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:23:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:23:30 INFO] incremented to [AERI set: name W7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:23:30 INFO] V7.SIG(18)
[sigmove 00:23:30 DEBUG] transformed V7Ma.SPC -> V7MA.SPC
[sigmove 00:23:30 DEBUG] transformed V7Mb.SPC -> V7MB.SPC
[sigmove 00:23:30 DEBUG] transformed V7Mc.SPC -> V7MC.SPC
[sigmove 00:23:30 DEBUG] transformed V7Md.SPC -> V7MD.SPC
[sigmove 00:23:30 DEBUG] transformed V7Me.SPC -> V7ME.SPC
[sigmove 00:23:30 DEBUG] transformed V7Mf.SPC -> V7MF.SPC
[Status 00:23:30 INFO] data for V7 transferred to science data processing
[Tidy 00:23:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:23:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:23:30 INFO] resetting WatchDogTimer
[Status 00:23:31 INFO] Starting Set [AERI set: name W7, 6 scans, 0 angle, D16300 command]
[Ingest 00:23:31 INFO] Sending XML status message
[Status 00:23:31 INFO] Mirror angle: 0
[Mirror 00:23:31 INFO] rotating to position W
[Status 00:23:31 INFO] .SET file for ACQ96 ready
[Ingest 00:23:31 INFO] Starting acquisition
[Status 00:23:31 INFO] reading housekeeping
[Status 00:23:49 INFO] acquire complete
[Status 00:23:50 INFO] writing housekeeping
[Sequencer 00:23:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:23:50 INFO] incremented W scene to 7 completed views
[Sequencer 00:23:50 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:23:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:23:50 INFO] incremented to [AERI set: name X7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:23:50 INFO] W7.SIG(18)
[sigmove 00:23:50 DEBUG] transformed W7Ma.SPC -> W7MA.SPC
[sigmove 00:23:50 DEBUG] transformed W7Mb.SPC -> W7MB.SPC
[sigmove 00:23:50 DEBUG] transformed W7Mc.SPC -> W7MC.SPC
[sigmove 00:23:50 DEBUG] transformed W7Md.SPC -> W7MD.SPC
[sigmove 00:23:50 DEBUG] transformed W7Me.SPC -> W7ME.SPC
[sigmove 00:23:50 DEBUG] transformed W7Mf.SPC -> W7MF.SPC
[Status 00:23:50 INFO] data for W7 transferred to science data processing
[Tidy 00:23:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:23:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:23:50 INFO] resetting WatchDogTimer
[Status 00:23:50 INFO] Starting Set [AERI set: name X7, 6 scans, 0 angle, D16300 command]
[Ingest 00:23:50 INFO] Sending XML status message
[Status 00:23:50 INFO] Mirror angle: 0
[Mirror 00:23:50 INFO] rotating to position X
[Status 00:23:50 INFO] .SET file for ACQ96 ready
[Ingest 00:23:50 INFO] Starting acquisition
[Status 00:23:50 INFO] reading housekeeping
[Status 00:24:08 INFO] acquire complete
[Status 00:24:09 INFO] writing housekeeping
[Sequencer 00:24:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:24:09 INFO] incremented X scene to 7 completed views
[Sequencer 00:24:09 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:24:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:24:09 INFO] incremented to [AERI set: name Y7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:24:09 INFO] X7.SIG(18)
[sigmove 00:24:09 DEBUG] transformed X7Ma.SPC -> X7MA.SPC
[sigmove 00:24:09 DEBUG] transformed X7Mb.SPC -> X7MB.SPC
[sigmove 00:24:09 DEBUG] transformed X7Mc.SPC -> X7MC.SPC
[sigmove 00:24:09 DEBUG] transformed X7Md.SPC -> X7MD.SPC
[sigmove 00:24:09 DEBUG] transformed X7Me.SPC -> X7ME.SPC
[sigmove 00:24:09 DEBUG] transformed X7Mf.SPC -> X7MF.SPC
[Status 00:24:09 INFO] data for X7 transferred to science data processing
[Tidy 00:24:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:24:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:24:09 INFO] resetting WatchDogTimer
[Status 00:24:09 INFO] Starting Set [AERI set: name Y7, 6 scans, 0 angle, D16300 command]
[Ingest 00:24:09 INFO] Sending XML status message
[Status 00:24:09 INFO] Mirror angle: 0
[Mirror 00:24:09 INFO] rotating to position Y
[Status 00:24:09 INFO] .SET file for ACQ96 ready
[Ingest 00:24:09 INFO] Starting acquisition
[Status 00:24:09 INFO] reading housekeeping
[Status 00:24:27 INFO] acquire complete
[Status 00:24:28 INFO] writing housekeeping
[Sequencer 00:24:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:24:28 INFO] incremented Y scene to 7 completed views
[Sequencer 00:24:28 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:24:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:24:28 INFO] incremented to [AERI set: name Z7, 6 scans, 0 angle, D16300 command] set
[sigmove 00:24:28 INFO] Y7.SIG(18)
[sigmove 00:24:28 DEBUG] transformed Y7Ma.SPC -> Y7MA.SPC
[sigmove 00:24:28 DEBUG] transformed Y7Mb.SPC -> Y7MB.SPC
[sigmove 00:24:28 DEBUG] transformed Y7Mc.SPC -> Y7MC.SPC
[sigmove 00:24:28 DEBUG] transformed Y7Md.SPC -> Y7MD.SPC
[sigmove 00:24:28 DEBUG] transformed Y7Me.SPC -> Y7ME.SPC
[sigmove 00:24:28 DEBUG] transformed Y7Mf.SPC -> Y7MF.SPC
[Status 00:24:28 INFO] data for Y7 transferred to science data processing
[Tidy 00:24:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:24:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:24:28 INFO] resetting WatchDogTimer
[Status 00:24:28 INFO] Starting Set [AERI set: name Z7, 6 scans, 0 angle, D16300 command]
[Ingest 00:24:28 INFO] Sending XML status message
[Status 00:24:28 INFO] Mirror angle: 0
[Mirror 00:24:28 INFO] rotating to position Z
[Status 00:24:28 INFO] .SET file for ACQ96 ready
[Ingest 00:24:28 INFO] Starting acquisition
[Status 00:24:28 INFO] reading housekeeping
[Status 00:24:47 INFO] acquire complete
[Status 00:24:47 INFO] writing housekeeping
[Sequencer 00:24:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:24:47 INFO] incremented Z scene to 7 completed views
[Sequencer 00:24:47 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:24:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:24:47 INFO] incremented to [AERI set: name A8, 6 scans, 120 angle, D28300 command] set
[sigmove 00:24:47 INFO] Z7.SIG(18)
[sigmove 00:24:47 DEBUG] transformed Z7Ma.SPC -> Z7MA.SPC
[sigmove 00:24:47 DEBUG] transformed Z7Mb.SPC -> Z7MB.SPC
[sigmove 00:24:47 DEBUG] transformed Z7Mc.SPC -> Z7MC.SPC
[sigmove 00:24:47 DEBUG] transformed Z7Md.SPC -> Z7MD.SPC
[sigmove 00:24:47 DEBUG] transformed Z7Me.SPC -> Z7ME.SPC
[sigmove 00:24:47 DEBUG] transformed Z7Mf.SPC -> Z7MF.SPC
[Status 00:24:47 INFO] data for Z7 transferred to science data processing
[Tidy 00:24:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:24:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:24:47 INFO] resetting WatchDogTimer
[Status 00:24:47 INFO] Starting Set [AERI set: name A8, 6 scans, 120 angle, D28300 command]
[Ingest 00:24:47 INFO] Sending XML status message
[Status 00:24:47 INFO] Mirror angle: 120
[Mirror 00:24:47 INFO] rotating to position A
[Status 00:24:48 INFO] .SET file for ACQ96 ready
[Ingest 00:24:48 INFO] Starting acquisition
[Status 00:24:48 INFO] reading housekeeping
[Status 00:25:07 INFO] acquire complete
[Status 00:25:07 INFO] writing housekeeping
[Sequencer 00:25:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:25:07 INFO] incremented A scene to 8 completed views
[Sequencer 00:25:07 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:25:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:25:07 INFO] incremented to [AERI set: name H8, 6 scans, 60 angle, D22500 command] set
[sigmove 00:25:07 INFO] A8.SIG(18)
[sigmove 00:25:07 DEBUG] transformed A8Ma.SPC -> A8MA.SPC
[sigmove 00:25:07 DEBUG] transformed A8Mb.SPC -> A8MB.SPC
[sigmove 00:25:07 DEBUG] transformed A8Mc.SPC -> A8MC.SPC
[sigmove 00:25:07 DEBUG] transformed A8Md.SPC -> A8MD.SPC
[sigmove 00:25:07 DEBUG] transformed A8Me.SPC -> A8ME.SPC
[sigmove 00:25:07 DEBUG] transformed A8Mf.SPC -> A8MF.SPC
[Status 00:25:07 INFO] data for A8 transferred to science data processing
[Tidy 00:25:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:25:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:25:07 INFO] resetting WatchDogTimer
[Status 00:25:07 INFO] Starting Set [AERI set: name H8, 6 scans, 60 angle, D22500 command]
[Ingest 00:25:07 INFO] Sending XML status message
[Status 00:25:07 INFO] Mirror angle: 60
[Mirror 00:25:07 INFO] rotating to position H
[Status 00:25:08 INFO] .SET file for ACQ96 ready
[Ingest 00:25:08 INFO] Starting acquisition
[Status 00:25:08 INFO] reading housekeeping
[Status 00:25:26 INFO] acquire complete
[Status 00:25:26 INFO] writing housekeeping
[Sequencer 00:25:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:25:26 INFO] incremented H scene to 8 completed views
[Sequencer 00:25:26 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:25:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:25:26 INFO] incremented to [AERI set: name S8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:25:26 INFO] H8.SIG(18)
[sigmove 00:25:26 DEBUG] transformed H8Ma.SPC -> H8MA.SPC
[sigmove 00:25:26 DEBUG] transformed H8Mb.SPC -> H8MB.SPC
[sigmove 00:25:26 DEBUG] transformed H8Mc.SPC -> H8MC.SPC
[sigmove 00:25:26 DEBUG] transformed H8Md.SPC -> H8MD.SPC
[sigmove 00:25:26 DEBUG] transformed H8Me.SPC -> H8ME.SPC
[sigmove 00:25:26 DEBUG] transformed H8Mf.SPC -> H8MF.SPC
[Status 00:25:26 INFO] data for H8 transferred to science data processing
[Tidy 00:25:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:25:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:25:26 INFO] resetting WatchDogTimer
[Status 00:25:26 INFO] Starting Set [AERI set: name S8, 6 scans, 0 angle, D16300 command]
[Ingest 00:25:26 INFO] Sending XML status message
[Status 00:25:26 INFO] Mirror angle: 0
[Mirror 00:25:26 INFO] rotating to position S
[Status 00:25:27 INFO] .SET file for ACQ96 ready
[Ingest 00:25:27 INFO] Starting acquisition
[Status 00:25:27 INFO] reading housekeeping
[Status 00:25:45 INFO] acquire complete
[Status 00:25:46 INFO] writing housekeeping
[Sequencer 00:25:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:25:46 INFO] incremented S scene to 8 completed views
[Sequencer 00:25:46 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:25:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:25:46 INFO] incremented to [AERI set: name T8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:25:46 INFO] S8.SIG(18)
[sigmove 00:25:46 DEBUG] transformed S8Ma.SPC -> S8MA.SPC
[sigmove 00:25:46 DEBUG] transformed S8Mb.SPC -> S8MB.SPC
[sigmove 00:25:46 DEBUG] transformed S8Mc.SPC -> S8MC.SPC
[sigmove 00:25:46 DEBUG] transformed S8Md.SPC -> S8MD.SPC
[sigmove 00:25:46 DEBUG] transformed S8Me.SPC -> S8ME.SPC
[sigmove 00:25:46 DEBUG] transformed S8Mf.SPC -> S8MF.SPC
[Status 00:25:46 INFO] data for S8 transferred to science data processing
[Tidy 00:25:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:25:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:25:46 INFO] resetting WatchDogTimer
[Status 00:25:46 INFO] Starting Set [AERI set: name T8, 6 scans, 0 angle, D16300 command]
[Ingest 00:25:46 INFO] Sending XML status message
[Status 00:25:46 INFO] Mirror angle: 0
[Mirror 00:25:46 INFO] rotating to position T
[Status 00:25:46 INFO] .SET file for ACQ96 ready
[Ingest 00:25:46 INFO] Starting acquisition
[Status 00:25:46 INFO] reading housekeeping
[Status 00:26:04 INFO] acquire complete
[Status 00:26:04 INFO] writing housekeeping
[Sequencer 00:26:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:26:04 INFO] incremented T scene to 8 completed views
[Sequencer 00:26:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:26:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:26:04 INFO] incremented to [AERI set: name U8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:26:04 INFO] T8.SIG(18)
[sigmove 00:26:04 DEBUG] transformed T8Ma.SPC -> T8MA.SPC
[sigmove 00:26:04 DEBUG] transformed T8Mb.SPC -> T8MB.SPC
[sigmove 00:26:04 DEBUG] transformed T8Mc.SPC -> T8MC.SPC
[sigmove 00:26:04 DEBUG] transformed T8Md.SPC -> T8MD.SPC
[sigmove 00:26:04 DEBUG] transformed T8Me.SPC -> T8ME.SPC
[sigmove 00:26:04 DEBUG] transformed T8Mf.SPC -> T8MF.SPC
[Status 00:26:04 INFO] data for T8 transferred to science data processing
[Tidy 00:26:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:26:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:26:04 INFO] resetting WatchDogTimer
[Status 00:26:04 INFO] Starting Set [AERI set: name U8, 6 scans, 0 angle, D16300 command]
[Ingest 00:26:04 INFO] Sending XML status message
[Status 00:26:04 INFO] Mirror angle: 0
[Mirror 00:26:04 INFO] rotating to position U
[Status 00:26:05 INFO] .SET file for ACQ96 ready
[Ingest 00:26:05 INFO] Starting acquisition
[Status 00:26:05 INFO] reading housekeeping
[Status 00:26:23 INFO] acquire complete
[Status 00:26:23 INFO] writing housekeeping
[Sequencer 00:26:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:26:23 INFO] incremented U scene to 8 completed views
[Sequencer 00:26:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:26:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:26:23 INFO] incremented to [AERI set: name V8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:26:23 INFO] U8.SIG(18)
[sigmove 00:26:23 DEBUG] transformed U8Ma.SPC -> U8MA.SPC
[sigmove 00:26:23 DEBUG] transformed U8Mb.SPC -> U8MB.SPC
[sigmove 00:26:23 DEBUG] transformed U8Mc.SPC -> U8MC.SPC
[sigmove 00:26:23 DEBUG] transformed U8Md.SPC -> U8MD.SPC
[sigmove 00:26:23 DEBUG] transformed U8Me.SPC -> U8ME.SPC
[sigmove 00:26:23 DEBUG] transformed U8Mf.SPC -> U8MF.SPC
[Status 00:26:23 INFO] data for U8 transferred to science data processing
[Tidy 00:26:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:26:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:26:23 INFO] resetting WatchDogTimer
[Status 00:26:23 INFO] Starting Set [AERI set: name V8, 6 scans, 0 angle, D16300 command]
[Ingest 00:26:23 INFO] Sending XML status message
[Status 00:26:23 INFO] Mirror angle: 0
[Mirror 00:26:24 INFO] rotating to position V
[Status 00:26:24 INFO] .SET file for ACQ96 ready
[Ingest 00:26:24 INFO] Starting acquisition
[Status 00:26:24 INFO] reading housekeeping
[Status 00:26:42 INFO] acquire complete
[Status 00:26:42 INFO] writing housekeeping
[Sequencer 00:26:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:26:42 INFO] incremented V scene to 8 completed views
[Sequencer 00:26:42 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:26:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:26:42 INFO] incremented to [AERI set: name W8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:26:42 INFO] V8.SIG(18)
[sigmove 00:26:42 DEBUG] transformed V8Ma.SPC -> V8MA.SPC
[sigmove 00:26:42 DEBUG] transformed V8Mb.SPC -> V8MB.SPC
[sigmove 00:26:42 DEBUG] transformed V8Mc.SPC -> V8MC.SPC
[sigmove 00:26:42 DEBUG] transformed V8Md.SPC -> V8MD.SPC
[sigmove 00:26:42 DEBUG] transformed V8Me.SPC -> V8ME.SPC
[sigmove 00:26:42 DEBUG] transformed V8Mf.SPC -> V8MF.SPC
[Status 00:26:42 INFO] data for V8 transferred to science data processing
[Tidy 00:26:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:26:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:26:42 INFO] resetting WatchDogTimer
[Status 00:26:43 INFO] Starting Set [AERI set: name W8, 6 scans, 0 angle, D16300 command]
[Ingest 00:26:43 INFO] Sending XML status message
[Status 00:26:43 INFO] Mirror angle: 0
[Mirror 00:26:43 INFO] rotating to position W
[Status 00:26:43 INFO] .SET file for ACQ96 ready
[Ingest 00:26:43 INFO] Starting acquisition
[Status 00:26:43 INFO] reading housekeeping
[Status 00:27:01 INFO] acquire complete
[Status 00:27:02 INFO] writing housekeeping
[Sequencer 00:27:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:27:02 INFO] incremented W scene to 8 completed views
[Sequencer 00:27:02 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:27:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:27:02 INFO] incremented to [AERI set: name X8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:27:02 INFO] W8.SIG(18)
[sigmove 00:27:02 DEBUG] transformed W8Ma.SPC -> W8MA.SPC
[sigmove 00:27:02 DEBUG] transformed W8Mb.SPC -> W8MB.SPC
[sigmove 00:27:02 DEBUG] transformed W8Mc.SPC -> W8MC.SPC
[sigmove 00:27:02 DEBUG] transformed W8Md.SPC -> W8MD.SPC
[sigmove 00:27:02 DEBUG] transformed W8Me.SPC -> W8ME.SPC
[sigmove 00:27:02 DEBUG] transformed W8Mf.SPC -> W8MF.SPC
[Status 00:27:02 INFO] data for W8 transferred to science data processing
[Tidy 00:27:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:27:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:27:02 INFO] resetting WatchDogTimer
[Status 00:27:02 INFO] Starting Set [AERI set: name X8, 6 scans, 0 angle, D16300 command]
[Ingest 00:27:02 INFO] Sending XML status message
[Status 00:27:02 INFO] Mirror angle: 0
[Mirror 00:27:02 INFO] rotating to position X
[Status 00:27:02 INFO] .SET file for ACQ96 ready
[Ingest 00:27:02 INFO] Starting acquisition
[Status 00:27:02 INFO] reading housekeeping
[Status 00:27:20 INFO] acquire complete
[Status 00:27:21 INFO] writing housekeeping
[Sequencer 00:27:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:27:21 INFO] incremented X scene to 8 completed views
[Sequencer 00:27:21 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:27:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:27:21 INFO] incremented to [AERI set: name Y8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:27:21 INFO] X8.SIG(18)
[sigmove 00:27:21 DEBUG] transformed X8Ma.SPC -> X8MA.SPC
[sigmove 00:27:21 DEBUG] transformed X8Mb.SPC -> X8MB.SPC
[sigmove 00:27:21 DEBUG] transformed X8Mc.SPC -> X8MC.SPC
[sigmove 00:27:21 DEBUG] transformed X8Md.SPC -> X8MD.SPC
[sigmove 00:27:21 DEBUG] transformed X8Me.SPC -> X8ME.SPC
[sigmove 00:27:21 DEBUG] transformed X8Mf.SPC -> X8MF.SPC
[Status 00:27:21 INFO] data for X8 transferred to science data processing
[Tidy 00:27:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:27:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:27:21 INFO] resetting WatchDogTimer
[Status 00:27:21 INFO] Starting Set [AERI set: name Y8, 6 scans, 0 angle, D16300 command]
[Ingest 00:27:21 INFO] Sending XML status message
[Status 00:27:21 INFO] Mirror angle: 0
[Mirror 00:27:21 INFO] rotating to position Y
[Status 00:27:21 INFO] .SET file for ACQ96 ready
[Ingest 00:27:21 INFO] Starting acquisition
[Status 00:27:21 INFO] reading housekeeping
[Status 00:27:39 INFO] acquire complete
[Status 00:27:40 INFO] writing housekeeping
[Sequencer 00:27:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:27:40 INFO] incremented Y scene to 8 completed views
[Sequencer 00:27:40 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:27:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:27:40 INFO] incremented to [AERI set: name Z8, 6 scans, 0 angle, D16300 command] set
[sigmove 00:27:40 INFO] Y8.SIG(18)
[sigmove 00:27:40 DEBUG] transformed Y8Ma.SPC -> Y8MA.SPC
[sigmove 00:27:40 DEBUG] transformed Y8Mb.SPC -> Y8MB.SPC
[sigmove 00:27:40 DEBUG] transformed Y8Mc.SPC -> Y8MC.SPC
[sigmove 00:27:40 DEBUG] transformed Y8Md.SPC -> Y8MD.SPC
[sigmove 00:27:40 DEBUG] transformed Y8Me.SPC -> Y8ME.SPC
[sigmove 00:27:40 DEBUG] transformed Y8Mf.SPC -> Y8MF.SPC
[Status 00:27:40 INFO] data for Y8 transferred to science data processing
[Tidy 00:27:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:27:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:27:40 INFO] resetting WatchDogTimer
[Status 00:27:40 INFO] Starting Set [AERI set: name Z8, 6 scans, 0 angle, D16300 command]
[Ingest 00:27:40 INFO] Sending XML status message
[Status 00:27:40 INFO] Mirror angle: 0
[Mirror 00:27:40 INFO] rotating to position Z
[Status 00:27:40 INFO] .SET file for ACQ96 ready
[Ingest 00:27:40 INFO] Starting acquisition
[Status 00:27:40 INFO] reading housekeeping
[Status 00:27:58 INFO] acquire complete
[Status 00:27:59 INFO] writing housekeeping
[Sequencer 00:27:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:27:59 INFO] incremented Z scene to 8 completed views
[Sequencer 00:27:59 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:27:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:27:59 INFO] incremented to [AERI set: name H9, 6 scans, 60 angle, D22500 command] set
[sigmove 00:27:59 INFO] Z8.SIG(18)
[sigmove 00:27:59 DEBUG] transformed Z8Ma.SPC -> Z8MA.SPC
[sigmove 00:27:59 DEBUG] transformed Z8Mb.SPC -> Z8MB.SPC
[sigmove 00:27:59 DEBUG] transformed Z8Mc.SPC -> Z8MC.SPC
[sigmove 00:27:59 DEBUG] transformed Z8Md.SPC -> Z8MD.SPC
[sigmove 00:27:59 DEBUG] transformed Z8Me.SPC -> Z8ME.SPC
[sigmove 00:27:59 DEBUG] transformed Z8Mf.SPC -> Z8MF.SPC
[Status 00:27:59 INFO] data for Z8 transferred to science data processing
[Tidy 00:27:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:27:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:27:59 INFO] resetting WatchDogTimer
[Status 00:27:59 INFO] Starting Set [AERI set: name H9, 6 scans, 60 angle, D22500 command]
[Ingest 00:27:59 INFO] Sending XML status message
[Status 00:27:59 INFO] Mirror angle: 60
[Mirror 00:27:59 INFO] rotating to position H
[Status 00:28:00 INFO] .SET file for ACQ96 ready
[Ingest 00:28:00 INFO] Starting acquisition
[Status 00:28:00 INFO] reading housekeeping
[Status 00:28:18 INFO] acquire complete
[Status 00:28:18 INFO] writing housekeeping
[Sequencer 00:28:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:28:18 INFO] incremented H scene to 9 completed views
[Sequencer 00:28:18 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:28:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:28:18 INFO] incremented to [AERI set: name A9, 6 scans, 120 angle, D28300 command] set
[sigmove 00:28:18 INFO] H9.SIG(18)
[sigmove 00:28:18 DEBUG] transformed H9Ma.SPC -> H9MA.SPC
[sigmove 00:28:18 DEBUG] transformed H9Mb.SPC -> H9MB.SPC
[sigmove 00:28:18 DEBUG] transformed H9Mc.SPC -> H9MC.SPC
[sigmove 00:28:18 DEBUG] transformed H9Md.SPC -> H9MD.SPC
[sigmove 00:28:18 DEBUG] transformed H9Me.SPC -> H9ME.SPC
[sigmove 00:28:18 DEBUG] transformed H9Mf.SPC -> H9MF.SPC
[Status 00:28:18 INFO] data for H9 transferred to science data processing
[Tidy 00:28:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:28:18 INFO] A7.FIN(19),H7.FIN(19),S7.FIN(19),T7.FIN(19),U7.FIN(19),V7.FIN(19),W7.FIN(19),X7.FIN(19),Y7.FIN(19),Z7.FIN(19),A8.FIN(19),H8.FIN(19),S8.FIN(19),T8.FIN(19),U8.FIN(19),V8.FIN(19),W8.FIN(19),X8.FIN(19),Y8.FIN(19),Z8.FIN(19)
[sigmove 00:28:18 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:28:18 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:28:18 DEBUG] done zipping
[WatchDog 00:28:18 INFO] resetting WatchDogTimer
[Status 00:28:19 INFO] Starting Set [AERI set: name A9, 6 scans, 120 angle, D28300 command]
[Ingest 00:28:19 INFO] Sending XML status message
[Status 00:28:19 INFO] Mirror angle: 120
[Mirror 00:28:19 INFO] rotating to position A
[Status 00:28:19 INFO] .SET file for ACQ96 ready
[Ingest 00:28:19 INFO] Starting acquisition
[Status 00:28:19 INFO] reading housekeeping
[Status 00:28:38 INFO] acquire complete
[Status 00:28:38 INFO] writing housekeeping
[Sequencer 00:28:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:28:38 INFO] incremented A scene to 9 completed views
[Sequencer 00:28:38 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:28:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:28:38 INFO] incremented to [AERI set: name S9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:28:38 INFO] A9.SIG(18)
[sigmove 00:28:38 DEBUG] transformed A9Ma.SPC -> A9MA.SPC
[sigmove 00:28:38 DEBUG] transformed A9Mb.SPC -> A9MB.SPC
[sigmove 00:28:38 DEBUG] transformed A9Mc.SPC -> A9MC.SPC
[sigmove 00:28:38 DEBUG] transformed A9Md.SPC -> A9MD.SPC
[sigmove 00:28:38 DEBUG] transformed A9Me.SPC -> A9ME.SPC
[sigmove 00:28:38 DEBUG] transformed A9Mf.SPC -> A9MF.SPC
[Status 00:28:38 INFO] data for A9 transferred to science data processing
[Tidy 00:28:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:28:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:28:38 INFO] resetting WatchDogTimer
[Status 00:28:38 INFO] Starting Set [AERI set: name S9, 6 scans, 0 angle, D16300 command]
[Ingest 00:28:38 INFO] Sending XML status message
[Status 00:28:38 INFO] Mirror angle: 0
[Mirror 00:28:38 INFO] rotating to position S
[Status 00:28:39 INFO] .SET file for ACQ96 ready
[Ingest 00:28:40 INFO] Starting acquisition
[Status 00:28:40 INFO] reading housekeeping
[Status 00:28:58 INFO] acquire complete
[Status 00:28:58 INFO] writing housekeeping
[Sequencer 00:28:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:28:58 INFO] incremented S scene to 9 completed views
[Sequencer 00:28:58 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:28:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:28:58 INFO] incremented to [AERI set: name T9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:28:58 INFO] S9.SIG(18)
[sigmove 00:28:58 DEBUG] transformed S9Ma.SPC -> S9MA.SPC
[sigmove 00:28:58 DEBUG] transformed S9Mb.SPC -> S9MB.SPC
[sigmove 00:28:58 DEBUG] transformed S9Mc.SPC -> S9MC.SPC
[sigmove 00:28:58 DEBUG] transformed S9Md.SPC -> S9MD.SPC
[sigmove 00:28:58 DEBUG] transformed S9Me.SPC -> S9ME.SPC
[sigmove 00:28:58 DEBUG] transformed S9Mf.SPC -> S9MF.SPC
[Status 00:28:58 INFO] data for S9 transferred to science data processing
[Tidy 00:28:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:28:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:28:58 INFO] resetting WatchDogTimer
[Status 00:28:58 INFO] Starting Set [AERI set: name T9, 6 scans, 0 angle, D16300 command]
[Ingest 00:28:58 INFO] Sending XML status message
[Status 00:28:58 INFO] Mirror angle: 0
[Mirror 00:28:58 INFO] rotating to position T
[Status 00:28:59 INFO] .SET file for ACQ96 ready
[Ingest 00:28:59 INFO] Starting acquisition
[Status 00:28:59 INFO] reading housekeeping
[Status 00:29:17 INFO] acquire complete
[Status 00:29:17 INFO] writing housekeeping
[Sequencer 00:29:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:29:17 INFO] incremented T scene to 9 completed views
[Sequencer 00:29:17 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:29:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:29:17 INFO] incremented to [AERI set: name U9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:29:17 INFO] T9.SIG(18)
[sigmove 00:29:18 DEBUG] transformed T9Ma.SPC -> T9MA.SPC
[sigmove 00:29:18 DEBUG] transformed T9Mb.SPC -> T9MB.SPC
[sigmove 00:29:18 DEBUG] transformed T9Mc.SPC -> T9MC.SPC
[sigmove 00:29:18 DEBUG] transformed T9Md.SPC -> T9MD.SPC
[sigmove 00:29:18 DEBUG] transformed T9Me.SPC -> T9ME.SPC
[sigmove 00:29:18 DEBUG] transformed T9Mf.SPC -> T9MF.SPC
[Status 00:29:18 INFO] data for T9 transferred to science data processing
[Tidy 00:29:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:29:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:29:18 INFO] resetting WatchDogTimer
[Status 00:29:18 INFO] Starting Set [AERI set: name U9, 6 scans, 0 angle, D16300 command]
[Ingest 00:29:18 INFO] Sending XML status message
[Status 00:29:18 INFO] Mirror angle: 0
[Mirror 00:29:18 INFO] rotating to position U
[Status 00:29:18 INFO] .SET file for ACQ96 ready
[Ingest 00:29:18 INFO] Starting acquisition
[Status 00:29:18 INFO] reading housekeeping
[Status 00:29:36 INFO] acquire complete
[Status 00:29:36 INFO] writing housekeeping
[Sequencer 00:29:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:29:36 INFO] incremented U scene to 9 completed views
[Sequencer 00:29:36 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:29:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:29:36 INFO] incremented to [AERI set: name V9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:29:36 INFO] U9.SIG(18)
[sigmove 00:29:36 DEBUG] transformed U9Ma.SPC -> U9MA.SPC
[sigmove 00:29:36 DEBUG] transformed U9Mb.SPC -> U9MB.SPC
[sigmove 00:29:36 DEBUG] transformed U9Mc.SPC -> U9MC.SPC
[sigmove 00:29:36 DEBUG] transformed U9Md.SPC -> U9MD.SPC
[sigmove 00:29:36 DEBUG] transformed U9Me.SPC -> U9ME.SPC
[sigmove 00:29:36 DEBUG] transformed U9Mf.SPC -> U9MF.SPC
[Status 00:29:36 INFO] data for U9 transferred to science data processing
[Tidy 00:29:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:29:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:29:36 INFO] resetting WatchDogTimer
[Status 00:29:37 INFO] Starting Set [AERI set: name V9, 6 scans, 0 angle, D16300 command]
[Ingest 00:29:37 INFO] Sending XML status message
[Status 00:29:37 INFO] Mirror angle: 0
[Mirror 00:29:37 INFO] rotating to position V
[Status 00:29:37 INFO] .SET file for ACQ96 ready
[Ingest 00:29:37 INFO] Starting acquisition
[Status 00:29:37 INFO] reading housekeeping
[Status 00:29:55 INFO] acquire complete
[Status 00:29:56 INFO] writing housekeeping
[Sequencer 00:29:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:29:56 INFO] incremented V scene to 9 completed views
[Sequencer 00:29:56 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:29:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:29:56 INFO] incremented to [AERI set: name W9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:29:56 INFO] V9.SIG(18)
[sigmove 00:29:56 DEBUG] transformed V9Ma.SPC -> V9MA.SPC
[sigmove 00:29:56 DEBUG] transformed V9Mb.SPC -> V9MB.SPC
[sigmove 00:29:56 DEBUG] transformed V9Mc.SPC -> V9MC.SPC
[sigmove 00:29:56 DEBUG] transformed V9Md.SPC -> V9MD.SPC
[sigmove 00:29:56 DEBUG] transformed V9Me.SPC -> V9ME.SPC
[sigmove 00:29:56 DEBUG] transformed V9Mf.SPC -> V9MF.SPC
[Status 00:29:56 INFO] data for V9 transferred to science data processing
[Tidy 00:29:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:29:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:29:56 INFO] resetting WatchDogTimer
[Status 00:29:56 INFO] Starting Set [AERI set: name W9, 6 scans, 0 angle, D16300 command]
[Ingest 00:29:56 INFO] Sending XML status message
[Status 00:29:56 INFO] Mirror angle: 0
[Mirror 00:29:56 INFO] rotating to position W
[Status 00:29:56 INFO] .SET file for ACQ96 ready
[Ingest 00:29:56 INFO] Starting acquisition
[Status 00:29:56 INFO] reading housekeeping
[Status 00:30:14 INFO] acquire complete
[Status 00:30:15 INFO] writing housekeeping
[Sequencer 00:30:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:30:15 INFO] incremented W scene to 9 completed views
[Sequencer 00:30:15 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:30:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:30:15 INFO] incremented to [AERI set: name X9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:30:15 INFO] W9.SIG(18)
[sigmove 00:30:15 DEBUG] transformed W9Ma.SPC -> W9MA.SPC
[sigmove 00:30:15 DEBUG] transformed W9Mb.SPC -> W9MB.SPC
[sigmove 00:30:15 DEBUG] transformed W9Mc.SPC -> W9MC.SPC
[sigmove 00:30:15 DEBUG] transformed W9Md.SPC -> W9MD.SPC
[sigmove 00:30:15 DEBUG] transformed W9Me.SPC -> W9ME.SPC
[sigmove 00:30:15 DEBUG] transformed W9Mf.SPC -> W9MF.SPC
[Status 00:30:15 INFO] data for W9 transferred to science data processing
[Tidy 00:30:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:30:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:30:15 INFO] resetting WatchDogTimer
[Status 00:30:15 INFO] Starting Set [AERI set: name X9, 6 scans, 0 angle, D16300 command]
[Ingest 00:30:15 INFO] Sending XML status message
[Status 00:30:15 INFO] Mirror angle: 0
[Mirror 00:30:15 INFO] rotating to position X
[Status 00:30:15 INFO] .SET file for ACQ96 ready
[Ingest 00:30:15 INFO] Starting acquisition
[Status 00:30:15 INFO] reading housekeeping
[Status 00:30:33 INFO] acquire complete
[Status 00:30:34 INFO] writing housekeeping
[Sequencer 00:30:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:30:34 INFO] incremented X scene to 9 completed views
[Sequencer 00:30:34 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:30:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:30:34 INFO] incremented to [AERI set: name Y9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:30:34 INFO] X9.SIG(18)
[sigmove 00:30:34 DEBUG] transformed X9Ma.SPC -> X9MA.SPC
[sigmove 00:30:34 DEBUG] transformed X9Mb.SPC -> X9MB.SPC
[sigmove 00:30:34 DEBUG] transformed X9Mc.SPC -> X9MC.SPC
[sigmove 00:30:34 DEBUG] transformed X9Md.SPC -> X9MD.SPC
[sigmove 00:30:34 DEBUG] transformed X9Me.SPC -> X9ME.SPC
[sigmove 00:30:34 DEBUG] transformed X9Mf.SPC -> X9MF.SPC
[Status 00:30:34 INFO] data for X9 transferred to science data processing
[Tidy 00:30:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:30:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:30:34 INFO] resetting WatchDogTimer
[Status 00:30:34 INFO] Starting Set [AERI set: name Y9, 6 scans, 0 angle, D16300 command]
[Ingest 00:30:34 INFO] Sending XML status message
[Status 00:30:34 INFO] Mirror angle: 0
[Mirror 00:30:34 INFO] rotating to position Y
[Status 00:30:34 INFO] .SET file for ACQ96 ready
[Ingest 00:30:34 INFO] Starting acquisition
[Status 00:30:34 INFO] reading housekeeping
[Status 00:30:53 INFO] acquire complete
[Status 00:30:53 INFO] writing housekeeping
[Sequencer 00:30:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:30:53 INFO] incremented Y scene to 9 completed views
[Sequencer 00:30:53 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:30:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:30:53 INFO] incremented to [AERI set: name Z9, 6 scans, 0 angle, D16300 command] set
[sigmove 00:30:53 INFO] Y9.SIG(18)
[sigmove 00:30:53 DEBUG] transformed Y9Ma.SPC -> Y9MA.SPC
[sigmove 00:30:53 DEBUG] transformed Y9Mb.SPC -> Y9MB.SPC
[sigmove 00:30:53 DEBUG] transformed Y9Mc.SPC -> Y9MC.SPC
[sigmove 00:30:53 DEBUG] transformed Y9Md.SPC -> Y9MD.SPC
[sigmove 00:30:53 DEBUG] transformed Y9Me.SPC -> Y9ME.SPC
[sigmove 00:30:53 DEBUG] transformed Y9Mf.SPC -> Y9MF.SPC
[Status 00:30:53 INFO] data for Y9 transferred to science data processing
[Tidy 00:30:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:30:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:30:53 INFO] resetting WatchDogTimer
[Status 00:30:53 INFO] Starting Set [AERI set: name Z9, 6 scans, 0 angle, D16300 command]
[Ingest 00:30:53 INFO] Sending XML status message
[Status 00:30:53 INFO] Mirror angle: 0
[Mirror 00:30:53 INFO] rotating to position Z
[Status 00:30:53 INFO] .SET file for ACQ96 ready
[Ingest 00:30:53 INFO] Starting acquisition
[Status 00:30:53 INFO] reading housekeeping
[Status 00:31:12 INFO] acquire complete
[Status 00:31:12 INFO] writing housekeeping
[Sequencer 00:31:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:31:12 INFO] incremented Z scene to 9 completed views
[Sequencer 00:31:12 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:31:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:31:12 INFO] incremented to [AERI set: name A10, 6 scans, 120 angle, D28300 command] set
[sigmove 00:31:12 INFO] Z9.SIG(18)
[sigmove 00:31:12 DEBUG] transformed Z9Ma.SPC -> Z9MA.SPC
[sigmove 00:31:12 DEBUG] transformed Z9Mb.SPC -> Z9MB.SPC
[sigmove 00:31:12 DEBUG] transformed Z9Mc.SPC -> Z9MC.SPC
[sigmove 00:31:12 DEBUG] transformed Z9Md.SPC -> Z9MD.SPC
[sigmove 00:31:12 DEBUG] transformed Z9Me.SPC -> Z9ME.SPC
[sigmove 00:31:12 DEBUG] transformed Z9Mf.SPC -> Z9MF.SPC
[Status 00:31:12 INFO] data for Z9 transferred to science data processing
[Tidy 00:31:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:31:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:31:12 INFO] resetting WatchDogTimer
[Status 00:31:12 INFO] Starting Set [AERI set: name A10, 6 scans, 120 angle, D28300 command]
[Ingest 00:31:12 INFO] Sending XML status message
[Status 00:31:12 INFO] Mirror angle: 120
[Mirror 00:31:12 INFO] rotating to position A
[Status 00:31:13 INFO] .SET file for ACQ96 ready
[Ingest 00:31:13 INFO] Starting acquisition
[Status 00:31:13 INFO] reading housekeeping
[Status 00:31:32 INFO] acquire complete
[Status 00:31:32 INFO] writing housekeeping
[Sequencer 00:31:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:31:32 INFO] incremented A scene to 10 completed views
[Sequencer 00:31:32 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:31:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:31:32 INFO] incremented to [AERI set: name H10, 6 scans, 60 angle, D22500 command] set
[sigmove 00:31:32 INFO] A10.SIG(18)
[sigmove 00:31:32 DEBUG] transformed A10Ma.SPC -> A10MA.SPC
[sigmove 00:31:32 DEBUG] transformed A10Mb.SPC -> A10MB.SPC
[sigmove 00:31:32 DEBUG] transformed A10Mc.SPC -> A10MC.SPC
[sigmove 00:31:32 DEBUG] transformed A10Md.SPC -> A10MD.SPC
[sigmove 00:31:32 DEBUG] transformed A10Me.SPC -> A10ME.SPC
[sigmove 00:31:32 DEBUG] transformed A10Mf.SPC -> A10MF.SPC
[Status 00:31:32 INFO] data for A10 transferred to science data processing
[Tidy 00:31:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:31:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:31:32 INFO] resetting WatchDogTimer
[Status 00:31:32 INFO] Starting Set [AERI set: name H10, 6 scans, 60 angle, D22500 command]
[Ingest 00:31:32 INFO] Sending XML status message
[Status 00:31:32 INFO] Mirror angle: 60
[Mirror 00:31:32 INFO] rotating to position H
[Status 00:31:33 INFO] .SET file for ACQ96 ready
[Ingest 00:31:33 INFO] Starting acquisition
[Status 00:31:33 INFO] reading housekeeping
[Status 00:31:51 INFO] acquire complete
[Status 00:31:51 INFO] writing housekeeping
[Sequencer 00:31:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:31:51 INFO] incremented H scene to 10 completed views
[Sequencer 00:31:51 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:31:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:31:51 INFO] incremented to [AERI set: name S10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:31:51 INFO] H10.SIG(18)
[sigmove 00:31:51 DEBUG] transformed H10Ma.SPC -> H10MA.SPC
[sigmove 00:31:51 DEBUG] transformed H10Mb.SPC -> H10MB.SPC
[sigmove 00:31:51 DEBUG] transformed H10Mc.SPC -> H10MC.SPC
[sigmove 00:31:51 DEBUG] transformed H10Md.SPC -> H10MD.SPC
[sigmove 00:31:51 DEBUG] transformed H10Me.SPC -> H10ME.SPC
[sigmove 00:31:51 DEBUG] transformed H10Mf.SPC -> H10MF.SPC
[Status 00:31:51 INFO] data for H10 transferred to science data processing
[Tidy 00:31:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:31:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:31:51 INFO] resetting WatchDogTimer
[Status 00:31:51 INFO] Starting Set [AERI set: name S10, 6 scans, 0 angle, D16300 command]
[Ingest 00:31:51 INFO] Sending XML status message
[Status 00:31:51 INFO] Mirror angle: 0
[Mirror 00:31:51 INFO] rotating to position S
[Status 00:31:52 INFO] .SET file for ACQ96 ready
[Ingest 00:31:52 INFO] Starting acquisition
[Status 00:31:52 INFO] reading housekeeping
[Status 00:32:10 INFO] acquire complete
[Status 00:32:10 INFO] writing housekeeping
[Sequencer 00:32:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:32:10 INFO] incremented S scene to 10 completed views
[Sequencer 00:32:10 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:32:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:32:10 INFO] incremented to [AERI set: name T10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:32:10 INFO] S10.SIG(18)
[sigmove 00:32:10 DEBUG] transformed S10Ma.SPC -> S10MA.SPC
[sigmove 00:32:10 DEBUG] transformed S10Mb.SPC -> S10MB.SPC
[sigmove 00:32:10 DEBUG] transformed S10Mc.SPC -> S10MC.SPC
[sigmove 00:32:10 DEBUG] transformed S10Md.SPC -> S10MD.SPC
[sigmove 00:32:10 DEBUG] transformed S10Me.SPC -> S10ME.SPC
[sigmove 00:32:10 DEBUG] transformed S10Mf.SPC -> S10MF.SPC
[Status 00:32:10 INFO] data for S10 transferred to science data processing
[Tidy 00:32:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:32:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:32:10 INFO] resetting WatchDogTimer
[Status 00:32:10 INFO] Starting Set [AERI set: name T10, 6 scans, 0 angle, D16300 command]
[Ingest 00:32:10 INFO] Sending XML status message
[Status 00:32:10 INFO] Mirror angle: 0
[Mirror 00:32:10 INFO] rotating to position T
[Status 00:32:11 INFO] .SET file for ACQ96 ready
[Ingest 00:32:11 INFO] Starting acquisition
[Status 00:32:11 INFO] reading housekeeping
[Status 00:32:29 INFO] acquire complete
[Status 00:32:29 INFO] writing housekeeping
[Sequencer 00:32:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:32:29 INFO] incremented T scene to 10 completed views
[Sequencer 00:32:29 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:32:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:32:29 INFO] incremented to [AERI set: name U10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:32:29 INFO] T10.SIG(18)
[sigmove 00:32:29 DEBUG] transformed T10Ma.SPC -> T10MA.SPC
[sigmove 00:32:29 DEBUG] transformed T10Mb.SPC -> T10MB.SPC
[sigmove 00:32:29 DEBUG] transformed T10Mc.SPC -> T10MC.SPC
[sigmove 00:32:29 DEBUG] transformed T10Md.SPC -> T10MD.SPC
[sigmove 00:32:29 DEBUG] transformed T10Me.SPC -> T10ME.SPC
[sigmove 00:32:29 DEBUG] transformed T10Mf.SPC -> T10MF.SPC
[Status 00:32:29 INFO] data for T10 transferred to science data processing
[Tidy 00:32:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:32:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:32:29 INFO] resetting WatchDogTimer
[Status 00:32:29 INFO] Starting Set [AERI set: name U10, 6 scans, 0 angle, D16300 command]
[Ingest 00:32:29 INFO] Sending XML status message
[Status 00:32:29 INFO] Mirror angle: 0
[Mirror 00:32:30 INFO] rotating to position U
[Status 00:32:30 INFO] .SET file for ACQ96 ready
[Ingest 00:32:30 INFO] Starting acquisition
[Status 00:32:30 INFO] reading housekeeping
[Status 00:32:48 INFO] acquire complete
[Status 00:32:48 INFO] writing housekeeping
[Sequencer 00:32:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:32:48 INFO] incremented U scene to 10 completed views
[Sequencer 00:32:48 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:32:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:32:48 INFO] incremented to [AERI set: name V10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:32:48 INFO] U10.SIG(18)
[sigmove 00:32:48 DEBUG] transformed U10Ma.SPC -> U10MA.SPC
[sigmove 00:32:48 DEBUG] transformed U10Mb.SPC -> U10MB.SPC
[sigmove 00:32:48 DEBUG] transformed U10Mc.SPC -> U10MC.SPC
[sigmove 00:32:48 DEBUG] transformed U10Md.SPC -> U10MD.SPC
[sigmove 00:32:48 DEBUG] transformed U10Me.SPC -> U10ME.SPC
[sigmove 00:32:48 DEBUG] transformed U10Mf.SPC -> U10MF.SPC
[Status 00:32:48 INFO] data for U10 transferred to science data processing
[Tidy 00:32:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:32:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:32:48 INFO] resetting WatchDogTimer
[Status 00:32:49 INFO] Starting Set [AERI set: name V10, 6 scans, 0 angle, D16300 command]
[Ingest 00:32:49 INFO] Sending XML status message
[Status 00:32:49 INFO] Mirror angle: 0
[Mirror 00:32:49 INFO] rotating to position V
[Status 00:32:49 INFO] .SET file for ACQ96 ready
[Ingest 00:32:49 INFO] Starting acquisition
[Status 00:32:49 INFO] reading housekeeping
[Status 00:33:07 INFO] acquire complete
[Status 00:33:08 INFO] writing housekeeping
[Sequencer 00:33:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:33:08 INFO] incremented V scene to 10 completed views
[Sequencer 00:33:08 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:33:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:33:08 INFO] incremented to [AERI set: name W10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:33:08 INFO] V10.SIG(18)
[sigmove 00:33:08 DEBUG] transformed V10Ma.SPC -> V10MA.SPC
[sigmove 00:33:08 DEBUG] transformed V10Mb.SPC -> V10MB.SPC
[sigmove 00:33:08 DEBUG] transformed V10Mc.SPC -> V10MC.SPC
[sigmove 00:33:08 DEBUG] transformed V10Md.SPC -> V10MD.SPC
[sigmove 00:33:08 DEBUG] transformed V10Me.SPC -> V10ME.SPC
[sigmove 00:33:08 DEBUG] transformed V10Mf.SPC -> V10MF.SPC
[Status 00:33:08 INFO] data for V10 transferred to science data processing
[Tidy 00:33:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:33:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:33:08 INFO] resetting WatchDogTimer
[Status 00:33:08 INFO] Starting Set [AERI set: name W10, 6 scans, 0 angle, D16300 command]
[Ingest 00:33:08 INFO] Sending XML status message
[Status 00:33:08 INFO] Mirror angle: 0
[Mirror 00:33:08 INFO] rotating to position W
[Status 00:33:08 INFO] .SET file for ACQ96 ready
[Ingest 00:33:08 INFO] Starting acquisition
[Status 00:33:08 INFO] reading housekeeping
[Status 00:33:26 INFO] acquire complete
[Status 00:33:27 INFO] writing housekeeping
[Sequencer 00:33:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:33:27 INFO] incremented W scene to 10 completed views
[Sequencer 00:33:27 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:33:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:33:27 INFO] incremented to [AERI set: name X10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:33:27 INFO] W10.SIG(18)
[sigmove 00:33:27 DEBUG] transformed W10Ma.SPC -> W10MA.SPC
[sigmove 00:33:27 DEBUG] transformed W10Mb.SPC -> W10MB.SPC
[sigmove 00:33:27 DEBUG] transformed W10Mc.SPC -> W10MC.SPC
[sigmove 00:33:27 DEBUG] transformed W10Md.SPC -> W10MD.SPC
[sigmove 00:33:27 DEBUG] transformed W10Me.SPC -> W10ME.SPC
[sigmove 00:33:27 DEBUG] transformed W10Mf.SPC -> W10MF.SPC
[Status 00:33:27 INFO] data for W10 transferred to science data processing
[Tidy 00:33:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:33:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:33:27 INFO] resetting WatchDogTimer
[Status 00:33:27 INFO] Starting Set [AERI set: name X10, 6 scans, 0 angle, D16300 command]
[Ingest 00:33:27 INFO] Sending XML status message
[Status 00:33:27 INFO] Mirror angle: 0
[Mirror 00:33:27 INFO] rotating to position X
[Status 00:33:27 INFO] .SET file for ACQ96 ready
[Ingest 00:33:27 INFO] Starting acquisition
[Status 00:33:27 INFO] reading housekeeping
[Status 00:33:45 INFO] acquire complete
[Status 00:33:46 INFO] writing housekeeping
[Sequencer 00:33:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:33:46 INFO] incremented X scene to 10 completed views
[Sequencer 00:33:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:33:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:33:46 INFO] incremented to [AERI set: name Y10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:33:46 INFO] X10.SIG(18)
[sigmove 00:33:46 DEBUG] transformed X10Ma.SPC -> X10MA.SPC
[sigmove 00:33:46 DEBUG] transformed X10Mb.SPC -> X10MB.SPC
[sigmove 00:33:46 DEBUG] transformed X10Mc.SPC -> X10MC.SPC
[sigmove 00:33:46 DEBUG] transformed X10Md.SPC -> X10MD.SPC
[sigmove 00:33:46 DEBUG] transformed X10Me.SPC -> X10ME.SPC
[sigmove 00:33:46 DEBUG] transformed X10Mf.SPC -> X10MF.SPC
[Status 00:33:46 INFO] data for X10 transferred to science data processing
[Tidy 00:33:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:33:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:33:46 INFO] resetting WatchDogTimer
[Status 00:33:46 INFO] Starting Set [AERI set: name Y10, 6 scans, 0 angle, D16300 command]
[Ingest 00:33:46 INFO] Sending XML status message
[Status 00:33:46 INFO] Mirror angle: 0
[Mirror 00:33:46 INFO] rotating to position Y
[Status 00:33:46 INFO] .SET file for ACQ96 ready
[Ingest 00:33:46 INFO] Starting acquisition
[Status 00:33:46 INFO] reading housekeeping
[Status 00:34:05 INFO] acquire complete
[Status 00:34:05 INFO] writing housekeeping
[Sequencer 00:34:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:34:05 INFO] incremented Y scene to 10 completed views
[Sequencer 00:34:05 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:34:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:34:05 INFO] incremented to [AERI set: name Z10, 6 scans, 0 angle, D16300 command] set
[sigmove 00:34:05 INFO] Y10.SIG(18)
[sigmove 00:34:05 DEBUG] transformed Y10Ma.SPC -> Y10MA.SPC
[sigmove 00:34:05 DEBUG] transformed Y10Mb.SPC -> Y10MB.SPC
[sigmove 00:34:05 DEBUG] transformed Y10Mc.SPC -> Y10MC.SPC
[sigmove 00:34:05 DEBUG] transformed Y10Md.SPC -> Y10MD.SPC
[sigmove 00:34:05 DEBUG] transformed Y10Me.SPC -> Y10ME.SPC
[sigmove 00:34:05 DEBUG] transformed Y10Mf.SPC -> Y10MF.SPC
[Status 00:34:05 INFO] data for Y10 transferred to science data processing
[Tidy 00:34:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:34:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:34:05 INFO] resetting WatchDogTimer
[Status 00:34:05 INFO] Starting Set [AERI set: name Z10, 6 scans, 0 angle, D16300 command]
[Ingest 00:34:05 INFO] Sending XML status message
[Status 00:34:05 INFO] Mirror angle: 0
[Mirror 00:34:05 INFO] rotating to position Z
[Status 00:34:05 INFO] .SET file for ACQ96 ready
[Ingest 00:34:05 INFO] Starting acquisition
[Status 00:34:05 INFO] reading housekeeping
[Status 00:34:24 INFO] acquire complete
[Status 00:34:24 INFO] writing housekeeping
[Sequencer 00:34:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:34:24 INFO] incremented Z scene to 10 completed views
[Sequencer 00:34:24 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:34:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:34:24 INFO] incremented to [AERI set: name H11, 6 scans, 60 angle, D22500 command] set
[sigmove 00:34:24 INFO] Z10.SIG(18)
[sigmove 00:34:24 DEBUG] transformed Z10Ma.SPC -> Z10MA.SPC
[sigmove 00:34:24 DEBUG] transformed Z10Mb.SPC -> Z10MB.SPC
[sigmove 00:34:24 DEBUG] transformed Z10Mc.SPC -> Z10MC.SPC
[sigmove 00:34:24 DEBUG] transformed Z10Md.SPC -> Z10MD.SPC
[sigmove 00:34:24 DEBUG] transformed Z10Me.SPC -> Z10ME.SPC
[sigmove 00:34:24 DEBUG] transformed Z10Mf.SPC -> Z10MF.SPC
[Status 00:34:24 INFO] data for Z10 transferred to science data processing
[Tidy 00:34:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:34:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:34:24 INFO] resetting WatchDogTimer
[Status 00:34:24 INFO] Starting Set [AERI set: name H11, 6 scans, 60 angle, D22500 command]
[Ingest 00:34:24 INFO] Sending XML status message
[Status 00:34:24 INFO] Mirror angle: 60
[Mirror 00:34:24 INFO] rotating to position H
[Status 00:34:25 INFO] .SET file for ACQ96 ready
[Ingest 00:34:25 INFO] Starting acquisition
[Status 00:34:25 INFO] reading housekeeping
[Status 00:34:43 INFO] acquire complete
[Status 00:34:43 INFO] writing housekeeping
[Sequencer 00:34:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:34:43 INFO] incremented H scene to 11 completed views
[Sequencer 00:34:43 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:34:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:34:43 INFO] incremented to [AERI set: name A11, 6 scans, 120 angle, D28300 command] set
[sigmove 00:34:43 INFO] H11.SIG(18)
[sigmove 00:34:43 DEBUG] transformed H11Ma.SPC -> H11MA.SPC
[sigmove 00:34:43 DEBUG] transformed H11Mb.SPC -> H11MB.SPC
[sigmove 00:34:43 DEBUG] transformed H11Mc.SPC -> H11MC.SPC
[sigmove 00:34:43 DEBUG] transformed H11Md.SPC -> H11MD.SPC
[sigmove 00:34:43 DEBUG] transformed H11Me.SPC -> H11ME.SPC
[sigmove 00:34:43 DEBUG] transformed H11Mf.SPC -> H11MF.SPC
[Status 00:34:43 INFO] data for H11 transferred to science data processing
[Tidy 00:34:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:34:43 INFO] A9.FIN(19),H9.FIN(19),S9.FIN(19),T9.FIN(19),U9.FIN(19),V9.FIN(19),W9.FIN(19),X9.FIN(19),Y9.FIN(19),Z9.FIN(19),A10.FIN(19),H10.FIN(19),S10.FIN(19),T10.FIN(19),U10.FIN(19),V10.FIN(19),W10.FIN(19),X10.FIN(19),Y10.FIN(19),Z10.FIN(19)
[sigmove 00:34:43 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:34:43 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:34:44 DEBUG] done zipping
[WatchDog 00:34:44 INFO] resetting WatchDogTimer
[Status 00:34:44 INFO] Starting Set [AERI set: name A11, 6 scans, 120 angle, D28300 command]
[Ingest 00:34:44 INFO] Sending XML status message
[Status 00:34:44 INFO] Mirror angle: 120
[Mirror 00:34:44 INFO] rotating to position A
[Status 00:34:44 INFO] .SET file for ACQ96 ready
[Ingest 00:34:44 INFO] Starting acquisition
[Status 00:34:45 INFO] reading housekeeping
[Status 00:35:03 INFO] acquire complete
[Status 00:35:03 INFO] writing housekeeping
[Sequencer 00:35:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:35:03 INFO] incremented A scene to 11 completed views
[Sequencer 00:35:03 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:35:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:35:03 INFO] incremented to [AERI set: name S11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:35:03 INFO] A11.SIG(18)
[sigmove 00:35:03 DEBUG] transformed A11Ma.SPC -> A11MA.SPC
[sigmove 00:35:03 DEBUG] transformed A11Mb.SPC -> A11MB.SPC
[sigmove 00:35:03 DEBUG] transformed A11Mc.SPC -> A11MC.SPC
[sigmove 00:35:03 DEBUG] transformed A11Md.SPC -> A11MD.SPC
[sigmove 00:35:03 DEBUG] transformed A11Me.SPC -> A11ME.SPC
[sigmove 00:35:03 DEBUG] transformed A11Mf.SPC -> A11MF.SPC
[Status 00:35:03 INFO] data for A11 transferred to science data processing
[Tidy 00:35:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:35:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:35:03 INFO] resetting WatchDogTimer
[Status 00:35:03 INFO] Starting Set [AERI set: name S11, 6 scans, 0 angle, D16300 command]
[Ingest 00:35:03 INFO] Sending XML status message
[Status 00:35:03 INFO] Mirror angle: 0
[Mirror 00:35:03 INFO] rotating to position S
[Status 00:35:05 INFO] .SET file for ACQ96 ready
[Ingest 00:35:05 INFO] Starting acquisition
[Status 00:35:05 INFO] reading housekeeping
[Status 00:35:23 INFO] acquire complete
[Status 00:35:23 INFO] writing housekeeping
[Sequencer 00:35:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:35:23 INFO] incremented S scene to 11 completed views
[Sequencer 00:35:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:35:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:35:23 INFO] incremented to [AERI set: name T11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:35:23 INFO] S11.SIG(18)
[sigmove 00:35:23 DEBUG] transformed S11Ma.SPC -> S11MA.SPC
[sigmove 00:35:23 DEBUG] transformed S11Mb.SPC -> S11MB.SPC
[sigmove 00:35:23 DEBUG] transformed S11Mc.SPC -> S11MC.SPC
[sigmove 00:35:23 DEBUG] transformed S11Md.SPC -> S11MD.SPC
[sigmove 00:35:23 DEBUG] transformed S11Me.SPC -> S11ME.SPC
[sigmove 00:35:23 DEBUG] transformed S11Mf.SPC -> S11MF.SPC
[Status 00:35:23 INFO] data for S11 transferred to science data processing
[Tidy 00:35:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:35:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:35:23 INFO] resetting WatchDogTimer
[Status 00:35:24 INFO] Starting Set [AERI set: name T11, 6 scans, 0 angle, D16300 command]
[Ingest 00:35:24 INFO] Sending XML status message
[Status 00:35:24 INFO] Mirror angle: 0
[Mirror 00:35:24 INFO] rotating to position T
[Status 00:35:24 INFO] .SET file for ACQ96 ready
[Ingest 00:35:24 INFO] Starting acquisition
[Status 00:35:24 INFO] reading housekeeping
[Status 00:35:42 INFO] acquire complete
[Status 00:35:42 INFO] writing housekeeping
[Sequencer 00:35:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:35:42 INFO] incremented T scene to 11 completed views
[Sequencer 00:35:42 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:35:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:35:42 INFO] incremented to [AERI set: name U11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:35:42 INFO] T11.SIG(18)
[sigmove 00:35:42 DEBUG] transformed T11Ma.SPC -> T11MA.SPC
[sigmove 00:35:42 DEBUG] transformed T11Mb.SPC -> T11MB.SPC
[sigmove 00:35:42 DEBUG] transformed T11Mc.SPC -> T11MC.SPC
[sigmove 00:35:42 DEBUG] transformed T11Md.SPC -> T11MD.SPC
[sigmove 00:35:42 DEBUG] transformed T11Me.SPC -> T11ME.SPC
[sigmove 00:35:42 DEBUG] transformed T11Mf.SPC -> T11MF.SPC
[Status 00:35:42 INFO] data for T11 transferred to science data processing
[Tidy 00:35:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:35:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:35:43 INFO] resetting WatchDogTimer
[Status 00:35:43 INFO] Starting Set [AERI set: name U11, 6 scans, 0 angle, D16300 command]
[Ingest 00:35:43 INFO] Sending XML status message
[Status 00:35:43 INFO] Mirror angle: 0
[Mirror 00:35:43 INFO] rotating to position U
[Status 00:35:43 INFO] .SET file for ACQ96 ready
[Ingest 00:35:43 INFO] Starting acquisition
[Status 00:35:43 INFO] reading housekeeping
[Status 00:36:01 INFO] acquire complete
[Status 00:36:02 INFO] writing housekeeping
[Sequencer 00:36:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:36:02 INFO] incremented U scene to 11 completed views
[Sequencer 00:36:02 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:36:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:36:02 INFO] incremented to [AERI set: name V11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:36:02 INFO] U11.SIG(18)
[sigmove 00:36:02 DEBUG] transformed U11Ma.SPC -> U11MA.SPC
[sigmove 00:36:02 DEBUG] transformed U11Mb.SPC -> U11MB.SPC
[sigmove 00:36:02 DEBUG] transformed U11Mc.SPC -> U11MC.SPC
[sigmove 00:36:02 DEBUG] transformed U11Md.SPC -> U11MD.SPC
[sigmove 00:36:02 DEBUG] transformed U11Me.SPC -> U11ME.SPC
[sigmove 00:36:02 DEBUG] transformed U11Mf.SPC -> U11MF.SPC
[Status 00:36:02 INFO] data for U11 transferred to science data processing
[Tidy 00:36:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:36:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:36:02 INFO] resetting WatchDogTimer
[Status 00:36:02 INFO] Starting Set [AERI set: name V11, 6 scans, 0 angle, D16300 command]
[Ingest 00:36:02 INFO] Sending XML status message
[Status 00:36:02 INFO] Mirror angle: 0
[Mirror 00:36:02 INFO] rotating to position V
[Status 00:36:02 INFO] .SET file for ACQ96 ready
[Ingest 00:36:02 INFO] Starting acquisition
[Status 00:36:02 INFO] reading housekeeping
[Status 00:36:20 INFO] acquire complete
[Status 00:36:21 INFO] writing housekeeping
[Sequencer 00:36:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:36:21 INFO] incremented V scene to 11 completed views
[Sequencer 00:36:21 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:36:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:36:21 INFO] incremented to [AERI set: name W11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:36:21 INFO] V11.SIG(18)
[sigmove 00:36:21 DEBUG] transformed V11Ma.SPC -> V11MA.SPC
[sigmove 00:36:21 DEBUG] transformed V11Mb.SPC -> V11MB.SPC
[sigmove 00:36:21 DEBUG] transformed V11Mc.SPC -> V11MC.SPC
[sigmove 00:36:21 DEBUG] transformed V11Md.SPC -> V11MD.SPC
[sigmove 00:36:21 DEBUG] transformed V11Me.SPC -> V11ME.SPC
[sigmove 00:36:21 DEBUG] transformed V11Mf.SPC -> V11MF.SPC
[Status 00:36:21 INFO] data for V11 transferred to science data processing
[Tidy 00:36:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:36:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:36:21 INFO] resetting WatchDogTimer
[Status 00:36:21 INFO] Starting Set [AERI set: name W11, 6 scans, 0 angle, D16300 command]
[Ingest 00:36:21 INFO] Sending XML status message
[Status 00:36:21 INFO] Mirror angle: 0
[Mirror 00:36:21 INFO] rotating to position W
[Status 00:36:21 INFO] .SET file for ACQ96 ready
[Ingest 00:36:21 INFO] Starting acquisition
[Status 00:36:21 INFO] reading housekeeping
[Status 00:36:39 INFO] acquire complete
[Status 00:36:40 INFO] writing housekeeping
[Sequencer 00:36:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:36:40 INFO] incremented W scene to 11 completed views
[Sequencer 00:36:40 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:36:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:36:40 INFO] incremented to [AERI set: name X11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:36:40 INFO] W11.SIG(18)
[sigmove 00:36:40 DEBUG] transformed W11Ma.SPC -> W11MA.SPC
[sigmove 00:36:40 DEBUG] transformed W11Mb.SPC -> W11MB.SPC
[sigmove 00:36:40 DEBUG] transformed W11Mc.SPC -> W11MC.SPC
[sigmove 00:36:40 DEBUG] transformed W11Md.SPC -> W11MD.SPC
[sigmove 00:36:40 DEBUG] transformed W11Me.SPC -> W11ME.SPC
[sigmove 00:36:40 DEBUG] transformed W11Mf.SPC -> W11MF.SPC
[Status 00:36:40 INFO] data for W11 transferred to science data processing
[Tidy 00:36:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:36:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:36:40 INFO] resetting WatchDogTimer
[Status 00:36:40 INFO] Starting Set [AERI set: name X11, 6 scans, 0 angle, D16300 command]
[Ingest 00:36:40 INFO] Sending XML status message
[Status 00:36:40 INFO] Mirror angle: 0
[Mirror 00:36:40 INFO] rotating to position X
[Status 00:36:40 INFO] .SET file for ACQ96 ready
[Ingest 00:36:40 INFO] Starting acquisition
[Status 00:36:40 INFO] reading housekeeping
[Status 00:36:59 INFO] acquire complete
[Status 00:36:59 INFO] writing housekeeping
[Sequencer 00:36:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:36:59 INFO] incremented X scene to 11 completed views
[Sequencer 00:36:59 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:36:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:36:59 INFO] incremented to [AERI set: name Y11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:36:59 INFO] X11.SIG(18)
[sigmove 00:36:59 DEBUG] transformed X11Ma.SPC -> X11MA.SPC
[sigmove 00:36:59 DEBUG] transformed X11Mb.SPC -> X11MB.SPC
[sigmove 00:36:59 DEBUG] transformed X11Mc.SPC -> X11MC.SPC
[sigmove 00:36:59 DEBUG] transformed X11Md.SPC -> X11MD.SPC
[sigmove 00:36:59 DEBUG] transformed X11Me.SPC -> X11ME.SPC
[sigmove 00:36:59 DEBUG] transformed X11Mf.SPC -> X11MF.SPC
[Status 00:36:59 INFO] data for X11 transferred to science data processing
[Tidy 00:36:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:36:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:36:59 INFO] resetting WatchDogTimer
[Status 00:36:59 INFO] Starting Set [AERI set: name Y11, 6 scans, 0 angle, D16300 command]
[Ingest 00:36:59 INFO] Sending XML status message
[Status 00:36:59 INFO] Mirror angle: 0
[Mirror 00:36:59 INFO] rotating to position Y
[Status 00:36:59 INFO] .SET file for ACQ96 ready
[Ingest 00:36:59 INFO] Starting acquisition
[Status 00:36:59 INFO] reading housekeeping
[Status 00:37:18 INFO] acquire complete
[Status 00:37:18 INFO] writing housekeeping
[Sequencer 00:37:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:37:18 INFO] incremented Y scene to 11 completed views
[Sequencer 00:37:18 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:37:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:37:18 INFO] incremented to [AERI set: name Z11, 6 scans, 0 angle, D16300 command] set
[sigmove 00:37:18 INFO] Y11.SIG(18)
[sigmove 00:37:18 DEBUG] transformed Y11Ma.SPC -> Y11MA.SPC
[sigmove 00:37:18 DEBUG] transformed Y11Mb.SPC -> Y11MB.SPC
[sigmove 00:37:18 DEBUG] transformed Y11Mc.SPC -> Y11MC.SPC
[sigmove 00:37:18 DEBUG] transformed Y11Md.SPC -> Y11MD.SPC
[sigmove 00:37:18 DEBUG] transformed Y11Me.SPC -> Y11ME.SPC
[sigmove 00:37:18 DEBUG] transformed Y11Mf.SPC -> Y11MF.SPC
[Status 00:37:18 INFO] data for Y11 transferred to science data processing
[Tidy 00:37:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:37:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:37:18 INFO] resetting WatchDogTimer
[Status 00:37:18 INFO] Starting Set [AERI set: name Z11, 6 scans, 0 angle, D16300 command]
[Ingest 00:37:18 INFO] Sending XML status message
[Status 00:37:18 INFO] Mirror angle: 0
[Mirror 00:37:18 INFO] rotating to position Z
[Status 00:37:18 INFO] .SET file for ACQ96 ready
[Ingest 00:37:18 INFO] Starting acquisition
[Status 00:37:18 INFO] reading housekeeping
[Status 00:37:37 INFO] acquire complete
[Status 00:37:37 INFO] writing housekeeping
[Sequencer 00:37:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:37:37 INFO] incremented Z scene to 11 completed views
[Sequencer 00:37:37 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:37:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:37:37 INFO] incremented to [AERI set: name A12, 6 scans, 120 angle, D28300 command] set
[sigmove 00:37:37 INFO] Z11.SIG(18)
[sigmove 00:37:37 DEBUG] transformed Z11Ma.SPC -> Z11MA.SPC
[sigmove 00:37:37 DEBUG] transformed Z11Mb.SPC -> Z11MB.SPC
[sigmove 00:37:37 DEBUG] transformed Z11Mc.SPC -> Z11MC.SPC
[sigmove 00:37:37 DEBUG] transformed Z11Md.SPC -> Z11MD.SPC
[sigmove 00:37:37 DEBUG] transformed Z11Me.SPC -> Z11ME.SPC
[sigmove 00:37:37 DEBUG] transformed Z11Mf.SPC -> Z11MF.SPC
[Status 00:37:37 INFO] data for Z11 transferred to science data processing
[Tidy 00:37:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:37:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:37:37 INFO] resetting WatchDogTimer
[Status 00:37:37 INFO] Starting Set [AERI set: name A12, 6 scans, 120 angle, D28300 command]
[Ingest 00:37:37 INFO] Sending XML status message
[Status 00:37:37 INFO] Mirror angle: 120
[Mirror 00:37:37 INFO] rotating to position A
[Status 00:37:38 INFO] .SET file for ACQ96 ready
[Ingest 00:37:38 INFO] Starting acquisition
[Status 00:37:39 INFO] reading housekeeping
[Status 00:37:57 INFO] acquire complete
[Status 00:37:57 INFO] writing housekeeping
[Sequencer 00:37:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:37:57 INFO] incremented A scene to 12 completed views
[Sequencer 00:37:57 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:37:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:37:57 INFO] incremented to [AERI set: name H12, 6 scans, 60 angle, D22500 command] set
[sigmove 00:37:57 INFO] A12.SIG(18)
[sigmove 00:37:57 DEBUG] transformed A12Ma.SPC -> A12MA.SPC
[sigmove 00:37:57 DEBUG] transformed A12Mb.SPC -> A12MB.SPC
[sigmove 00:37:57 DEBUG] transformed A12Mc.SPC -> A12MC.SPC
[sigmove 00:37:57 DEBUG] transformed A12Md.SPC -> A12MD.SPC
[sigmove 00:37:57 DEBUG] transformed A12Me.SPC -> A12ME.SPC
[sigmove 00:37:57 DEBUG] transformed A12Mf.SPC -> A12MF.SPC
[Status 00:37:57 INFO] data for A12 transferred to science data processing
[Tidy 00:37:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:37:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:37:57 INFO] resetting WatchDogTimer
[Status 00:37:57 INFO] Starting Set [AERI set: name H12, 6 scans, 60 angle, D22500 command]
[Ingest 00:37:57 INFO] Sending XML status message
[Status 00:37:57 INFO] Mirror angle: 60
[Mirror 00:37:57 INFO] rotating to position H
[Status 00:37:58 INFO] .SET file for ACQ96 ready
[Ingest 00:37:58 INFO] Starting acquisition
[Status 00:37:58 INFO] reading housekeeping
[Status 00:38:16 INFO] acquire complete
[Status 00:38:16 INFO] writing housekeeping
[Sequencer 00:38:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:38:16 INFO] incremented H scene to 12 completed views
[Sequencer 00:38:16 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:38:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:38:16 INFO] incremented to [AERI set: name S12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:38:16 INFO] H12.SIG(18)
[sigmove 00:38:16 DEBUG] transformed H12Ma.SPC -> H12MA.SPC
[sigmove 00:38:16 DEBUG] transformed H12Mb.SPC -> H12MB.SPC
[sigmove 00:38:16 DEBUG] transformed H12Mc.SPC -> H12MC.SPC
[sigmove 00:38:16 DEBUG] transformed H12Md.SPC -> H12MD.SPC
[sigmove 00:38:16 DEBUG] transformed H12Me.SPC -> H12ME.SPC
[sigmove 00:38:16 DEBUG] transformed H12Mf.SPC -> H12MF.SPC
[Status 00:38:16 INFO] data for H12 transferred to science data processing
[Tidy 00:38:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:38:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:38:16 INFO] resetting WatchDogTimer
[Status 00:38:16 INFO] Starting Set [AERI set: name S12, 6 scans, 0 angle, D16300 command]
[Ingest 00:38:16 INFO] Sending XML status message
[Status 00:38:16 INFO] Mirror angle: 0
[Mirror 00:38:16 INFO] rotating to position S
[Status 00:38:17 INFO] .SET file for ACQ96 ready
[Ingest 00:38:17 INFO] Starting acquisition
[Status 00:38:17 INFO] reading housekeeping
[Status 00:38:35 INFO] acquire complete
[Status 00:38:35 INFO] writing housekeeping
[Sequencer 00:38:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:38:35 INFO] incremented S scene to 12 completed views
[Sequencer 00:38:35 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:38:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:38:35 INFO] incremented to [AERI set: name T12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:38:35 INFO] S12.SIG(18)
[sigmove 00:38:35 DEBUG] transformed S12Ma.SPC -> S12MA.SPC
[sigmove 00:38:35 DEBUG] transformed S12Mb.SPC -> S12MB.SPC
[sigmove 00:38:35 DEBUG] transformed S12Mc.SPC -> S12MC.SPC
[sigmove 00:38:35 DEBUG] transformed S12Md.SPC -> S12MD.SPC
[sigmove 00:38:35 DEBUG] transformed S12Me.SPC -> S12ME.SPC
[sigmove 00:38:35 DEBUG] transformed S12Mf.SPC -> S12MF.SPC
[Status 00:38:35 INFO] data for S12 transferred to science data processing
[Tidy 00:38:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:38:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:38:35 INFO] resetting WatchDogTimer
[Status 00:38:35 INFO] Starting Set [AERI set: name T12, 6 scans, 0 angle, D16300 command]
[Ingest 00:38:35 INFO] Sending XML status message
[Status 00:38:35 INFO] Mirror angle: 0
[Mirror 00:38:36 INFO] rotating to position T
[Status 00:38:36 INFO] .SET file for ACQ96 ready
[Ingest 00:38:36 INFO] Starting acquisition
[Status 00:38:36 INFO] reading housekeeping
[Status 00:38:54 INFO] acquire complete
[Status 00:38:55 INFO] writing housekeeping
[Sequencer 00:38:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:38:55 INFO] incremented T scene to 12 completed views
[Sequencer 00:38:55 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:38:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:38:55 INFO] incremented to [AERI set: name U12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:38:55 INFO] T12.SIG(18)
[sigmove 00:38:55 DEBUG] transformed T12Ma.SPC -> T12MA.SPC
[sigmove 00:38:55 DEBUG] transformed T12Mb.SPC -> T12MB.SPC
[sigmove 00:38:55 DEBUG] transformed T12Mc.SPC -> T12MC.SPC
[sigmove 00:38:55 DEBUG] transformed T12Md.SPC -> T12MD.SPC
[sigmove 00:38:55 DEBUG] transformed T12Me.SPC -> T12ME.SPC
[sigmove 00:38:55 DEBUG] transformed T12Mf.SPC -> T12MF.SPC
[Status 00:38:55 INFO] data for T12 transferred to science data processing
[Tidy 00:38:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:38:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:38:55 INFO] resetting WatchDogTimer
[Status 00:38:55 INFO] Starting Set [AERI set: name U12, 6 scans, 0 angle, D16300 command]
[Ingest 00:38:55 INFO] Sending XML status message
[Status 00:38:55 INFO] Mirror angle: 0
[Mirror 00:38:55 INFO] rotating to position U
[Status 00:38:55 INFO] .SET file for ACQ96 ready
[Ingest 00:38:55 INFO] Starting acquisition
[Status 00:38:55 INFO] reading housekeeping
[Status 00:39:13 INFO] acquire complete
[Status 00:39:14 INFO] writing housekeeping
[Sequencer 00:39:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:39:14 INFO] incremented U scene to 12 completed views
[Sequencer 00:39:14 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:39:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:39:14 INFO] incremented to [AERI set: name V12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:39:14 INFO] U12.SIG(18)
[sigmove 00:39:14 DEBUG] transformed U12Ma.SPC -> U12MA.SPC
[sigmove 00:39:14 DEBUG] transformed U12Mb.SPC -> U12MB.SPC
[sigmove 00:39:14 DEBUG] transformed U12Mc.SPC -> U12MC.SPC
[sigmove 00:39:14 DEBUG] transformed U12Md.SPC -> U12MD.SPC
[sigmove 00:39:14 DEBUG] transformed U12Me.SPC -> U12ME.SPC
[sigmove 00:39:14 DEBUG] transformed U12Mf.SPC -> U12MF.SPC
[Status 00:39:14 INFO] data for U12 transferred to science data processing
[Tidy 00:39:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:39:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:39:14 INFO] resetting WatchDogTimer
[Status 00:39:14 INFO] Starting Set [AERI set: name V12, 6 scans, 0 angle, D16300 command]
[Ingest 00:39:14 INFO] Sending XML status message
[Status 00:39:14 INFO] Mirror angle: 0
[Mirror 00:39:14 INFO] rotating to position V
[Status 00:39:14 INFO] .SET file for ACQ96 ready
[Ingest 00:39:14 INFO] Starting acquisition
[Status 00:39:14 INFO] reading housekeeping
[Status 00:39:32 INFO] acquire complete
[Status 00:39:33 INFO] writing housekeeping
[Sequencer 00:39:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:39:33 INFO] incremented V scene to 12 completed views
[Sequencer 00:39:33 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:39:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:39:33 INFO] incremented to [AERI set: name W12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:39:33 INFO] V12.SIG(18)
[sigmove 00:39:33 DEBUG] transformed V12Ma.SPC -> V12MA.SPC
[sigmove 00:39:33 DEBUG] transformed V12Mb.SPC -> V12MB.SPC
[sigmove 00:39:33 DEBUG] transformed V12Mc.SPC -> V12MC.SPC
[sigmove 00:39:33 DEBUG] transformed V12Md.SPC -> V12MD.SPC
[sigmove 00:39:33 DEBUG] transformed V12Me.SPC -> V12ME.SPC
[sigmove 00:39:33 DEBUG] transformed V12Mf.SPC -> V12MF.SPC
[Status 00:39:33 INFO] data for V12 transferred to science data processing
[Tidy 00:39:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:39:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:39:33 INFO] resetting WatchDogTimer
[Status 00:39:33 INFO] Starting Set [AERI set: name W12, 6 scans, 0 angle, D16300 command]
[Ingest 00:39:33 INFO] Sending XML status message
[Status 00:39:33 INFO] Mirror angle: 0
[Mirror 00:39:33 INFO] rotating to position W
[Status 00:39:33 INFO] .SET file for ACQ96 ready
[Ingest 00:39:33 INFO] Starting acquisition
[Status 00:39:33 INFO] reading housekeeping
[Status 00:39:51 INFO] acquire complete
[Status 00:39:52 INFO] writing housekeeping
[Sequencer 00:39:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:39:52 INFO] incremented W scene to 12 completed views
[Sequencer 00:39:52 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:39:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:39:52 INFO] incremented to [AERI set: name X12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:39:52 INFO] W12.SIG(18)
[sigmove 00:39:52 DEBUG] transformed W12Ma.SPC -> W12MA.SPC
[sigmove 00:39:52 DEBUG] transformed W12Mb.SPC -> W12MB.SPC
[sigmove 00:39:52 DEBUG] transformed W12Mc.SPC -> W12MC.SPC
[sigmove 00:39:52 DEBUG] transformed W12Md.SPC -> W12MD.SPC
[sigmove 00:39:52 DEBUG] transformed W12Me.SPC -> W12ME.SPC
[sigmove 00:39:52 DEBUG] transformed W12Mf.SPC -> W12MF.SPC
[Status 00:39:52 INFO] data for W12 transferred to science data processing
[Tidy 00:39:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:39:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:39:52 INFO] resetting WatchDogTimer
[Status 00:39:52 INFO] Starting Set [AERI set: name X12, 6 scans, 0 angle, D16300 command]
[Ingest 00:39:52 INFO] Sending XML status message
[Status 00:39:52 INFO] Mirror angle: 0
[Mirror 00:39:52 INFO] rotating to position X
[Status 00:39:52 INFO] .SET file for ACQ96 ready
[Ingest 00:39:52 INFO] Starting acquisition
[Status 00:39:52 INFO] reading housekeeping
[Status 00:40:11 INFO] acquire complete
[Status 00:40:11 INFO] writing housekeeping
[Sequencer 00:40:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:40:11 INFO] incremented X scene to 12 completed views
[Sequencer 00:40:11 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:40:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:40:11 INFO] incremented to [AERI set: name Y12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:40:11 INFO] X12.SIG(18)
[sigmove 00:40:11 DEBUG] transformed X12Ma.SPC -> X12MA.SPC
[sigmove 00:40:11 DEBUG] transformed X12Mb.SPC -> X12MB.SPC
[sigmove 00:40:11 DEBUG] transformed X12Mc.SPC -> X12MC.SPC
[sigmove 00:40:11 DEBUG] transformed X12Md.SPC -> X12MD.SPC
[sigmove 00:40:11 DEBUG] transformed X12Me.SPC -> X12ME.SPC
[sigmove 00:40:11 DEBUG] transformed X12Mf.SPC -> X12MF.SPC
[Status 00:40:11 INFO] data for X12 transferred to science data processing
[Tidy 00:40:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:40:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:40:11 INFO] resetting WatchDogTimer
[Status 00:40:11 INFO] Starting Set [AERI set: name Y12, 6 scans, 0 angle, D16300 command]
[Ingest 00:40:11 INFO] Sending XML status message
[Status 00:40:11 INFO] Mirror angle: 0
[Mirror 00:40:11 INFO] rotating to position Y
[Status 00:40:11 INFO] .SET file for ACQ96 ready
[Ingest 00:40:11 INFO] Starting acquisition
[Status 00:40:11 INFO] reading housekeeping
[Status 00:40:30 INFO] acquire complete
[Status 00:40:30 INFO] writing housekeeping
[Sequencer 00:40:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:40:30 INFO] incremented Y scene to 12 completed views
[Sequencer 00:40:30 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:40:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:40:30 INFO] incremented to [AERI set: name Z12, 6 scans, 0 angle, D16300 command] set
[sigmove 00:40:30 INFO] Y12.SIG(18)
[sigmove 00:40:30 DEBUG] transformed Y12Ma.SPC -> Y12MA.SPC
[sigmove 00:40:30 DEBUG] transformed Y12Mb.SPC -> Y12MB.SPC
[sigmove 00:40:30 DEBUG] transformed Y12Mc.SPC -> Y12MC.SPC
[sigmove 00:40:30 DEBUG] transformed Y12Md.SPC -> Y12MD.SPC
[sigmove 00:40:30 DEBUG] transformed Y12Me.SPC -> Y12ME.SPC
[sigmove 00:40:30 DEBUG] transformed Y12Mf.SPC -> Y12MF.SPC
[Status 00:40:30 INFO] data for Y12 transferred to science data processing
[Tidy 00:40:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:40:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:40:30 INFO] resetting WatchDogTimer
[Status 00:40:30 INFO] Starting Set [AERI set: name Z12, 6 scans, 0 angle, D16300 command]
[Ingest 00:40:30 INFO] Sending XML status message
[Status 00:40:30 INFO] Mirror angle: 0
[Mirror 00:40:30 INFO] rotating to position Z
[Status 00:40:30 INFO] .SET file for ACQ96 ready
[Ingest 00:40:30 INFO] Starting acquisition
[Status 00:40:30 INFO] reading housekeeping
[Status 00:40:49 INFO] acquire complete
[Status 00:40:49 INFO] writing housekeeping
[Sequencer 00:40:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:40:49 INFO] incremented Z scene to 12 completed views
[Sequencer 00:40:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:40:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:40:49 INFO] incremented to [AERI set: name H13, 6 scans, 60 angle, D22500 command] set
[sigmove 00:40:49 INFO] Z12.SIG(18)
[sigmove 00:40:49 DEBUG] transformed Z12Ma.SPC -> Z12MA.SPC
[sigmove 00:40:49 DEBUG] transformed Z12Mb.SPC -> Z12MB.SPC
[sigmove 00:40:49 DEBUG] transformed Z12Mc.SPC -> Z12MC.SPC
[sigmove 00:40:49 DEBUG] transformed Z12Md.SPC -> Z12MD.SPC
[sigmove 00:40:49 DEBUG] transformed Z12Me.SPC -> Z12ME.SPC
[sigmove 00:40:49 DEBUG] transformed Z12Mf.SPC -> Z12MF.SPC
[Status 00:40:49 INFO] data for Z12 transferred to science data processing
[Tidy 00:40:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:40:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:40:49 INFO] resetting WatchDogTimer
[Status 00:40:49 INFO] Starting Set [AERI set: name H13, 6 scans, 60 angle, D22500 command]
[Ingest 00:40:49 INFO] Sending XML status message
[Status 00:40:49 INFO] Mirror angle: 60
[Mirror 00:40:49 INFO] rotating to position H
[Status 00:40:50 INFO] .SET file for ACQ96 ready
[Ingest 00:40:50 INFO] Starting acquisition
[Status 00:40:50 INFO] reading housekeeping
[Status 00:41:08 INFO] acquire complete
[Status 00:41:08 INFO] writing housekeeping
[Sequencer 00:41:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:41:08 INFO] incremented H scene to 13 completed views
[Sequencer 00:41:08 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:41:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:41:08 INFO] incremented to [AERI set: name A13, 6 scans, 120 angle, D28300 command] set
[sigmove 00:41:08 INFO] H13.SIG(18)
[sigmove 00:41:08 DEBUG] transformed H13Ma.SPC -> H13MA.SPC
[sigmove 00:41:08 DEBUG] transformed H13Mb.SPC -> H13MB.SPC
[sigmove 00:41:08 DEBUG] transformed H13Mc.SPC -> H13MC.SPC
[sigmove 00:41:08 DEBUG] transformed H13Md.SPC -> H13MD.SPC
[sigmove 00:41:08 DEBUG] transformed H13Me.SPC -> H13ME.SPC
[sigmove 00:41:08 DEBUG] transformed H13Mf.SPC -> H13MF.SPC
[Status 00:41:08 INFO] data for H13 transferred to science data processing
[Tidy 00:41:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:41:08 INFO] A11.FIN(19),H11.FIN(19),S11.FIN(19),T11.FIN(19),U11.FIN(19),V11.FIN(19),W11.FIN(19),X11.FIN(19),Y11.FIN(19),Z11.FIN(19),A12.FIN(19),H12.FIN(19),S12.FIN(19),T12.FIN(19),U12.FIN(19),V12.FIN(19),W12.FIN(19),X12.FIN(19),Y12.FIN(19),Z12.FIN(19)
[sigmove 00:41:08 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:41:08 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:41:09 DEBUG] done zipping
[WatchDog 00:41:09 INFO] resetting WatchDogTimer
[Status 00:41:09 INFO] Starting Set [AERI set: name A13, 6 scans, 120 angle, D28300 command]
[Ingest 00:41:09 INFO] Sending XML status message
[Status 00:41:09 INFO] Mirror angle: 120
[Mirror 00:41:09 INFO] rotating to position A
[Status 00:41:10 INFO] .SET file for ACQ96 ready
[Ingest 00:41:10 INFO] Starting acquisition
[Status 00:41:10 INFO] reading housekeeping
[Status 00:41:28 INFO] acquire complete
[Status 00:41:28 INFO] writing housekeeping
[Sequencer 00:41:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:41:28 INFO] incremented A scene to 13 completed views
[Sequencer 00:41:28 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:41:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:41:28 INFO] incremented to [AERI set: name S13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:41:28 INFO] A13.SIG(18)
[sigmove 00:41:28 DEBUG] transformed A13Ma.SPC -> A13MA.SPC
[sigmove 00:41:28 DEBUG] transformed A13Mb.SPC -> A13MB.SPC
[sigmove 00:41:28 DEBUG] transformed A13Mc.SPC -> A13MC.SPC
[sigmove 00:41:28 DEBUG] transformed A13Md.SPC -> A13MD.SPC
[sigmove 00:41:28 DEBUG] transformed A13Me.SPC -> A13ME.SPC
[sigmove 00:41:28 DEBUG] transformed A13Mf.SPC -> A13MF.SPC
[Status 00:41:28 INFO] data for A13 transferred to science data processing
[Tidy 00:41:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:41:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:41:28 INFO] resetting WatchDogTimer
[Status 00:41:28 INFO] Starting Set [AERI set: name S13, 6 scans, 0 angle, D16300 command]
[Ingest 00:41:28 INFO] Sending XML status message
[Status 00:41:28 INFO] Mirror angle: 0
[Mirror 00:41:28 INFO] rotating to position S
[Status 00:41:30 INFO] .SET file for ACQ96 ready
[Ingest 00:41:30 INFO] Starting acquisition
[Status 00:41:30 INFO] reading housekeeping
[Status 00:41:48 INFO] acquire complete
[Status 00:41:49 INFO] writing housekeeping
[Sequencer 00:41:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:41:49 INFO] incremented S scene to 13 completed views
[Sequencer 00:41:49 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:41:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:41:49 INFO] incremented to [AERI set: name T13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:41:49 INFO] S13.SIG(18)
[sigmove 00:41:49 DEBUG] transformed S13Ma.SPC -> S13MA.SPC
[sigmove 00:41:49 DEBUG] transformed S13Mb.SPC -> S13MB.SPC
[sigmove 00:41:49 DEBUG] transformed S13Mc.SPC -> S13MC.SPC
[sigmove 00:41:49 DEBUG] transformed S13Md.SPC -> S13MD.SPC
[sigmove 00:41:49 DEBUG] transformed S13Me.SPC -> S13ME.SPC
[sigmove 00:41:49 DEBUG] transformed S13Mf.SPC -> S13MF.SPC
[Status 00:41:49 INFO] data for S13 transferred to science data processing
[Tidy 00:41:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:41:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:41:49 INFO] resetting WatchDogTimer
[Status 00:41:49 INFO] Starting Set [AERI set: name T13, 6 scans, 0 angle, D16300 command]
[Ingest 00:41:49 INFO] Sending XML status message
[Status 00:41:49 INFO] Mirror angle: 0
[Mirror 00:41:49 INFO] rotating to position T
[Status 00:41:49 INFO] .SET file for ACQ96 ready
[Ingest 00:41:49 INFO] Starting acquisition
[Status 00:41:49 INFO] reading housekeeping
[Status 00:42:07 INFO] acquire complete
[Status 00:42:08 INFO] writing housekeeping
[Sequencer 00:42:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:42:08 INFO] incremented T scene to 13 completed views
[Sequencer 00:42:08 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:42:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:42:08 INFO] incremented to [AERI set: name U13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:42:08 INFO] T13.SIG(18)
[sigmove 00:42:08 DEBUG] transformed T13Ma.SPC -> T13MA.SPC
[sigmove 00:42:08 DEBUG] transformed T13Mb.SPC -> T13MB.SPC
[sigmove 00:42:08 DEBUG] transformed T13Mc.SPC -> T13MC.SPC
[sigmove 00:42:08 DEBUG] transformed T13Md.SPC -> T13MD.SPC
[sigmove 00:42:08 DEBUG] transformed T13Me.SPC -> T13ME.SPC
[sigmove 00:42:08 DEBUG] transformed T13Mf.SPC -> T13MF.SPC
[Status 00:42:08 INFO] data for T13 transferred to science data processing
[Tidy 00:42:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:42:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:42:08 INFO] resetting WatchDogTimer
[Status 00:42:08 INFO] Starting Set [AERI set: name U13, 6 scans, 0 angle, D16300 command]
[Ingest 00:42:08 INFO] Sending XML status message
[Status 00:42:08 INFO] Mirror angle: 0
[Mirror 00:42:08 INFO] rotating to position U
[Status 00:42:08 INFO] .SET file for ACQ96 ready
[Ingest 00:42:08 INFO] Starting acquisition
[Status 00:42:08 INFO] reading housekeeping
[Status 00:42:26 INFO] acquire complete
[Status 00:42:27 INFO] writing housekeeping
[Sequencer 00:42:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:42:27 INFO] incremented U scene to 13 completed views
[Sequencer 00:42:27 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:42:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:42:27 INFO] incremented to [AERI set: name V13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:42:27 INFO] U13.SIG(18)
[sigmove 00:42:27 DEBUG] transformed U13Ma.SPC -> U13MA.SPC
[sigmove 00:42:27 DEBUG] transformed U13Mb.SPC -> U13MB.SPC
[sigmove 00:42:27 DEBUG] transformed U13Mc.SPC -> U13MC.SPC
[sigmove 00:42:27 DEBUG] transformed U13Md.SPC -> U13MD.SPC
[sigmove 00:42:27 DEBUG] transformed U13Me.SPC -> U13ME.SPC
[sigmove 00:42:27 DEBUG] transformed U13Mf.SPC -> U13MF.SPC
[Status 00:42:27 INFO] data for U13 transferred to science data processing
[Tidy 00:42:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:42:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:42:27 INFO] resetting WatchDogTimer
[Status 00:42:27 INFO] Starting Set [AERI set: name V13, 6 scans, 0 angle, D16300 command]
[Ingest 00:42:27 INFO] Sending XML status message
[Status 00:42:27 INFO] Mirror angle: 0
[Mirror 00:42:27 INFO] rotating to position V
[Status 00:42:27 INFO] .SET file for ACQ96 ready
[Ingest 00:42:27 INFO] Starting acquisition
[Status 00:42:27 INFO] reading housekeeping
[Status 00:42:45 INFO] acquire complete
[Status 00:42:46 INFO] writing housekeeping
[Sequencer 00:42:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:42:46 INFO] incremented V scene to 13 completed views
[Sequencer 00:42:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:42:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:42:46 INFO] incremented to [AERI set: name W13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:42:46 INFO] V13.SIG(18)
[sigmove 00:42:46 DEBUG] transformed V13Ma.SPC -> V13MA.SPC
[sigmove 00:42:46 DEBUG] transformed V13Mb.SPC -> V13MB.SPC
[sigmove 00:42:46 DEBUG] transformed V13Mc.SPC -> V13MC.SPC
[sigmove 00:42:46 DEBUG] transformed V13Md.SPC -> V13MD.SPC
[sigmove 00:42:46 DEBUG] transformed V13Me.SPC -> V13ME.SPC
[sigmove 00:42:46 DEBUG] transformed V13Mf.SPC -> V13MF.SPC
[Status 00:42:46 INFO] data for V13 transferred to science data processing
[Tidy 00:42:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:42:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:42:46 INFO] resetting WatchDogTimer
[Status 00:42:46 INFO] Starting Set [AERI set: name W13, 6 scans, 0 angle, D16300 command]
[Ingest 00:42:46 INFO] Sending XML status message
[Status 00:42:46 INFO] Mirror angle: 0
[Mirror 00:42:46 INFO] rotating to position W
[Status 00:42:46 INFO] .SET file for ACQ96 ready
[Ingest 00:42:46 INFO] Starting acquisition
[Status 00:42:46 INFO] reading housekeeping
[Status 00:43:05 INFO] acquire complete
[Status 00:43:05 INFO] writing housekeeping
[Sequencer 00:43:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:43:05 INFO] incremented W scene to 13 completed views
[Sequencer 00:43:05 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:43:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:43:05 INFO] incremented to [AERI set: name X13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:43:05 INFO] W13.SIG(18)
[sigmove 00:43:05 DEBUG] transformed W13Ma.SPC -> W13MA.SPC
[sigmove 00:43:05 DEBUG] transformed W13Mb.SPC -> W13MB.SPC
[sigmove 00:43:05 DEBUG] transformed W13Mc.SPC -> W13MC.SPC
[sigmove 00:43:05 DEBUG] transformed W13Md.SPC -> W13MD.SPC
[sigmove 00:43:05 DEBUG] transformed W13Me.SPC -> W13ME.SPC
[sigmove 00:43:05 DEBUG] transformed W13Mf.SPC -> W13MF.SPC
[Status 00:43:05 INFO] data for W13 transferred to science data processing
[Tidy 00:43:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:43:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:43:05 INFO] resetting WatchDogTimer
[Status 00:43:05 INFO] Starting Set [AERI set: name X13, 6 scans, 0 angle, D16300 command]
[Ingest 00:43:05 INFO] Sending XML status message
[Status 00:43:05 INFO] Mirror angle: 0
[Mirror 00:43:05 INFO] rotating to position X
[Status 00:43:05 INFO] .SET file for ACQ96 ready
[Ingest 00:43:05 INFO] Starting acquisition
[Status 00:43:05 INFO] reading housekeeping
[Status 00:43:24 INFO] acquire complete
[Status 00:43:24 INFO] writing housekeeping
[Sequencer 00:43:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:43:24 INFO] incremented X scene to 13 completed views
[Sequencer 00:43:24 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:43:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:43:24 INFO] incremented to [AERI set: name Y13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:43:24 INFO] X13.SIG(18)
[sigmove 00:43:24 DEBUG] transformed X13Ma.SPC -> X13MA.SPC
[sigmove 00:43:24 DEBUG] transformed X13Mb.SPC -> X13MB.SPC
[sigmove 00:43:24 DEBUG] transformed X13Mc.SPC -> X13MC.SPC
[sigmove 00:43:24 DEBUG] transformed X13Md.SPC -> X13MD.SPC
[sigmove 00:43:24 DEBUG] transformed X13Me.SPC -> X13ME.SPC
[sigmove 00:43:24 DEBUG] transformed X13Mf.SPC -> X13MF.SPC
[Status 00:43:24 INFO] data for X13 transferred to science data processing
[Tidy 00:43:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:43:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:43:24 INFO] resetting WatchDogTimer
[Status 00:43:24 INFO] Starting Set [AERI set: name Y13, 6 scans, 0 angle, D16300 command]
[Ingest 00:43:24 INFO] Sending XML status message
[Status 00:43:24 INFO] Mirror angle: 0
[Mirror 00:43:24 INFO] rotating to position Y
[Status 00:43:24 INFO] .SET file for ACQ96 ready
[Ingest 00:43:24 INFO] Starting acquisition
[Status 00:43:24 INFO] reading housekeeping
[Status 00:43:43 INFO] acquire complete
[Status 00:43:43 INFO] writing housekeeping
[Sequencer 00:43:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:43:43 INFO] incremented Y scene to 13 completed views
[Sequencer 00:43:43 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:43:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:43:43 INFO] incremented to [AERI set: name Z13, 6 scans, 0 angle, D16300 command] set
[sigmove 00:43:43 INFO] Y13.SIG(18)
[sigmove 00:43:43 DEBUG] transformed Y13Ma.SPC -> Y13MA.SPC
[sigmove 00:43:43 DEBUG] transformed Y13Mb.SPC -> Y13MB.SPC
[sigmove 00:43:43 DEBUG] transformed Y13Mc.SPC -> Y13MC.SPC
[sigmove 00:43:43 DEBUG] transformed Y13Md.SPC -> Y13MD.SPC
[sigmove 00:43:43 DEBUG] transformed Y13Me.SPC -> Y13ME.SPC
[sigmove 00:43:43 DEBUG] transformed Y13Mf.SPC -> Y13MF.SPC
[Status 00:43:43 INFO] data for Y13 transferred to science data processing
[Tidy 00:43:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:43:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:43:43 INFO] resetting WatchDogTimer
[Status 00:43:43 INFO] Starting Set [AERI set: name Z13, 6 scans, 0 angle, D16300 command]
[Ingest 00:43:43 INFO] Sending XML status message
[Status 00:43:43 INFO] Mirror angle: 0
[Mirror 00:43:43 INFO] rotating to position Z
[Status 00:43:43 INFO] .SET file for ACQ96 ready
[Ingest 00:43:43 INFO] Starting acquisition
[Status 00:43:43 INFO] reading housekeeping
[Status 00:44:02 INFO] acquire complete
[Status 00:44:02 INFO] writing housekeeping
[Sequencer 00:44:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:44:02 INFO] incremented Z scene to 13 completed views
[Sequencer 00:44:02 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:44:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:44:02 INFO] incremented to [AERI set: name A14, 6 scans, 120 angle, D28300 command] set
[sigmove 00:44:02 INFO] Z13.SIG(18)
[sigmove 00:44:02 DEBUG] transformed Z13Ma.SPC -> Z13MA.SPC
[sigmove 00:44:02 DEBUG] transformed Z13Mb.SPC -> Z13MB.SPC
[sigmove 00:44:02 DEBUG] transformed Z13Mc.SPC -> Z13MC.SPC
[sigmove 00:44:02 DEBUG] transformed Z13Md.SPC -> Z13MD.SPC
[sigmove 00:44:02 DEBUG] transformed Z13Me.SPC -> Z13ME.SPC
[sigmove 00:44:02 DEBUG] transformed Z13Mf.SPC -> Z13MF.SPC
[Status 00:44:02 INFO] data for Z13 transferred to science data processing
[Tidy 00:44:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:44:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:44:02 INFO] resetting WatchDogTimer
[Status 00:44:02 INFO] Starting Set [AERI set: name A14, 6 scans, 120 angle, D28300 command]
[Ingest 00:44:02 INFO] Sending XML status message
[Status 00:44:02 INFO] Mirror angle: 120
[Mirror 00:44:02 INFO] rotating to position A
[Status 00:44:03 INFO] .SET file for ACQ96 ready
[Ingest 00:44:04 INFO] Starting acquisition
[Status 00:44:04 INFO] reading housekeeping
[Status 00:44:22 INFO] acquire complete
[Status 00:44:22 INFO] writing housekeeping
[Sequencer 00:44:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:44:22 INFO] incremented A scene to 14 completed views
[Sequencer 00:44:22 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:44:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:44:22 INFO] incremented to [AERI set: name H14, 6 scans, 60 angle, D22500 command] set
[sigmove 00:44:22 INFO] A14.SIG(18)
[sigmove 00:44:22 DEBUG] transformed A14Ma.SPC -> A14MA.SPC
[sigmove 00:44:22 DEBUG] transformed A14Mb.SPC -> A14MB.SPC
[sigmove 00:44:22 DEBUG] transformed A14Mc.SPC -> A14MC.SPC
[sigmove 00:44:22 DEBUG] transformed A14Md.SPC -> A14MD.SPC
[sigmove 00:44:22 DEBUG] transformed A14Me.SPC -> A14ME.SPC
[sigmove 00:44:22 DEBUG] transformed A14Mf.SPC -> A14MF.SPC
[Status 00:44:22 INFO] data for A14 transferred to science data processing
[Tidy 00:44:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:44:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:44:22 INFO] resetting WatchDogTimer
[Status 00:44:22 INFO] Starting Set [AERI set: name H14, 6 scans, 60 angle, D22500 command]
[Ingest 00:44:22 INFO] Sending XML status message
[Status 00:44:22 INFO] Mirror angle: 60
[Mirror 00:44:22 INFO] rotating to position H
[Status 00:44:23 INFO] .SET file for ACQ96 ready
[Ingest 00:44:23 INFO] Starting acquisition
[Status 00:44:23 INFO] reading housekeeping
[Status 00:44:41 INFO] acquire complete
[Status 00:44:41 INFO] writing housekeeping
[Sequencer 00:44:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:44:41 INFO] incremented H scene to 14 completed views
[Sequencer 00:44:41 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:44:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:44:41 INFO] incremented to [AERI set: name S14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:44:41 INFO] H14.SIG(18)
[sigmove 00:44:41 DEBUG] transformed H14Ma.SPC -> H14MA.SPC
[sigmove 00:44:41 DEBUG] transformed H14Mb.SPC -> H14MB.SPC
[sigmove 00:44:41 DEBUG] transformed H14Mc.SPC -> H14MC.SPC
[sigmove 00:44:41 DEBUG] transformed H14Md.SPC -> H14MD.SPC
[sigmove 00:44:41 DEBUG] transformed H14Me.SPC -> H14ME.SPC
[sigmove 00:44:41 DEBUG] transformed H14Mf.SPC -> H14MF.SPC
[Status 00:44:41 INFO] data for H14 transferred to science data processing
[Tidy 00:44:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:44:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:44:41 INFO] resetting WatchDogTimer
[Status 00:44:41 INFO] Starting Set [AERI set: name S14, 6 scans, 0 angle, D16300 command]
[Ingest 00:44:41 INFO] Sending XML status message
[Status 00:44:41 INFO] Mirror angle: 0
[Mirror 00:44:42 INFO] rotating to position S
[Status 00:44:42 INFO] .SET file for ACQ96 ready
[Ingest 00:44:42 INFO] Starting acquisition
[Status 00:44:42 INFO] reading housekeeping
[Status 00:45:00 INFO] acquire complete
[Status 00:45:00 INFO] writing housekeeping
[Sequencer 00:45:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:45:00 INFO] incremented S scene to 14 completed views
[Sequencer 00:45:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:45:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:45:00 INFO] incremented to [AERI set: name T14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:45:00 INFO] S14.SIG(18)
[sigmove 00:45:00 DEBUG] transformed S14Ma.SPC -> S14MA.SPC
[sigmove 00:45:00 DEBUG] transformed S14Mb.SPC -> S14MB.SPC
[sigmove 00:45:00 DEBUG] transformed S14Mc.SPC -> S14MC.SPC
[sigmove 00:45:00 DEBUG] transformed S14Md.SPC -> S14MD.SPC
[sigmove 00:45:00 DEBUG] transformed S14Me.SPC -> S14ME.SPC
[sigmove 00:45:00 DEBUG] transformed S14Mf.SPC -> S14MF.SPC
[Status 00:45:00 INFO] data for S14 transferred to science data processing
[Tidy 00:45:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:45:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:45:00 INFO] resetting WatchDogTimer
[Status 00:45:01 INFO] Starting Set [AERI set: name T14, 6 scans, 0 angle, D16300 command]
[Ingest 00:45:01 INFO] Sending XML status message
[Status 00:45:01 INFO] Mirror angle: 0
[Mirror 00:45:01 INFO] rotating to position T
[Status 00:45:01 INFO] .SET file for ACQ96 ready
[Ingest 00:45:01 INFO] Starting acquisition
[Status 00:45:01 INFO] reading housekeeping
[Status 00:45:19 INFO] acquire complete
[Status 00:45:20 INFO] writing housekeeping
[Sequencer 00:45:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:45:20 INFO] incremented T scene to 14 completed views
[Sequencer 00:45:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:45:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:45:20 INFO] incremented to [AERI set: name U14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:45:20 INFO] T14.SIG(18)
[sigmove 00:45:20 DEBUG] transformed T14Ma.SPC -> T14MA.SPC
[sigmove 00:45:20 DEBUG] transformed T14Mb.SPC -> T14MB.SPC
[sigmove 00:45:20 DEBUG] transformed T14Mc.SPC -> T14MC.SPC
[sigmove 00:45:20 DEBUG] transformed T14Md.SPC -> T14MD.SPC
[sigmove 00:45:20 DEBUG] transformed T14Me.SPC -> T14ME.SPC
[sigmove 00:45:20 DEBUG] transformed T14Mf.SPC -> T14MF.SPC
[Status 00:45:20 INFO] data for T14 transferred to science data processing
[Tidy 00:45:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:45:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:45:20 INFO] resetting WatchDogTimer
[Status 00:45:20 INFO] Starting Set [AERI set: name U14, 6 scans, 0 angle, D16300 command]
[Ingest 00:45:20 INFO] Sending XML status message
[Status 00:45:20 INFO] Mirror angle: 0
[Mirror 00:45:20 INFO] rotating to position U
[Status 00:45:20 INFO] .SET file for ACQ96 ready
[Ingest 00:45:20 INFO] Starting acquisition
[Status 00:45:20 INFO] reading housekeeping
[Status 00:45:38 INFO] acquire complete
[Status 00:45:39 INFO] writing housekeeping
[Sequencer 00:45:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:45:39 INFO] incremented U scene to 14 completed views
[Sequencer 00:45:39 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:45:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:45:39 INFO] incremented to [AERI set: name V14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:45:39 INFO] U14.SIG(18)
[sigmove 00:45:39 DEBUG] transformed U14Ma.SPC -> U14MA.SPC
[sigmove 00:45:39 DEBUG] transformed U14Mb.SPC -> U14MB.SPC
[sigmove 00:45:39 DEBUG] transformed U14Mc.SPC -> U14MC.SPC
[sigmove 00:45:39 DEBUG] transformed U14Md.SPC -> U14MD.SPC
[sigmove 00:45:39 DEBUG] transformed U14Me.SPC -> U14ME.SPC
[sigmove 00:45:39 DEBUG] transformed U14Mf.SPC -> U14MF.SPC
[Status 00:45:39 INFO] data for U14 transferred to science data processing
[Tidy 00:45:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:45:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:45:39 INFO] resetting WatchDogTimer
[Status 00:45:39 INFO] Starting Set [AERI set: name V14, 6 scans, 0 angle, D16300 command]
[Ingest 00:45:39 INFO] Sending XML status message
[Status 00:45:39 INFO] Mirror angle: 0
[Mirror 00:45:39 INFO] rotating to position V
[Status 00:45:39 INFO] .SET file for ACQ96 ready
[Ingest 00:45:39 INFO] Starting acquisition
[Status 00:45:39 INFO] reading housekeeping
[Status 00:45:57 INFO] acquire complete
[Status 00:45:58 INFO] writing housekeeping
[Sequencer 00:45:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:45:58 INFO] incremented V scene to 14 completed views
[Sequencer 00:45:58 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:45:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:45:58 INFO] incremented to [AERI set: name W14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:45:58 INFO] V14.SIG(18)
[sigmove 00:45:58 DEBUG] transformed V14Ma.SPC -> V14MA.SPC
[sigmove 00:45:58 DEBUG] transformed V14Mb.SPC -> V14MB.SPC
[sigmove 00:45:58 DEBUG] transformed V14Mc.SPC -> V14MC.SPC
[sigmove 00:45:58 DEBUG] transformed V14Md.SPC -> V14MD.SPC
[sigmove 00:45:58 DEBUG] transformed V14Me.SPC -> V14ME.SPC
[sigmove 00:45:58 DEBUG] transformed V14Mf.SPC -> V14MF.SPC
[Status 00:45:58 INFO] data for V14 transferred to science data processing
[Tidy 00:45:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:45:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:45:58 INFO] resetting WatchDogTimer
[Status 00:45:58 INFO] Starting Set [AERI set: name W14, 6 scans, 0 angle, D16300 command]
[Ingest 00:45:58 INFO] Sending XML status message
[Status 00:45:58 INFO] Mirror angle: 0
[Mirror 00:45:58 INFO] rotating to position W
[Status 00:45:58 INFO] .SET file for ACQ96 ready
[Ingest 00:45:58 INFO] Starting acquisition
[Status 00:45:58 INFO] reading housekeeping
[Status 00:46:17 INFO] acquire complete
[Status 00:46:17 INFO] writing housekeeping
[Sequencer 00:46:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:46:17 INFO] incremented W scene to 14 completed views
[Sequencer 00:46:17 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:46:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:46:17 INFO] incremented to [AERI set: name X14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:46:17 INFO] W14.SIG(18)
[sigmove 00:46:17 DEBUG] transformed W14Ma.SPC -> W14MA.SPC
[sigmove 00:46:17 DEBUG] transformed W14Mb.SPC -> W14MB.SPC
[sigmove 00:46:17 DEBUG] transformed W14Mc.SPC -> W14MC.SPC
[sigmove 00:46:17 DEBUG] transformed W14Md.SPC -> W14MD.SPC
[sigmove 00:46:17 DEBUG] transformed W14Me.SPC -> W14ME.SPC
[sigmove 00:46:17 DEBUG] transformed W14Mf.SPC -> W14MF.SPC
[Status 00:46:17 INFO] data for W14 transferred to science data processing
[Tidy 00:46:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:46:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:46:17 INFO] resetting WatchDogTimer
[Status 00:46:17 INFO] Starting Set [AERI set: name X14, 6 scans, 0 angle, D16300 command]
[Ingest 00:46:17 INFO] Sending XML status message
[Status 00:46:17 INFO] Mirror angle: 0
[Mirror 00:46:17 INFO] rotating to position X
[Status 00:46:17 INFO] .SET file for ACQ96 ready
[Ingest 00:46:17 INFO] Starting acquisition
[Status 00:46:17 INFO] reading housekeeping
[Status 00:46:36 INFO] acquire complete
[Status 00:46:36 INFO] writing housekeeping
[Sequencer 00:46:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:46:36 INFO] incremented X scene to 14 completed views
[Sequencer 00:46:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:46:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:46:36 INFO] incremented to [AERI set: name Y14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:46:36 INFO] X14.SIG(18)
[sigmove 00:46:36 DEBUG] transformed X14Ma.SPC -> X14MA.SPC
[sigmove 00:46:36 DEBUG] transformed X14Mb.SPC -> X14MB.SPC
[sigmove 00:46:36 DEBUG] transformed X14Mc.SPC -> X14MC.SPC
[sigmove 00:46:36 DEBUG] transformed X14Md.SPC -> X14MD.SPC
[sigmove 00:46:36 DEBUG] transformed X14Me.SPC -> X14ME.SPC
[sigmove 00:46:36 DEBUG] transformed X14Mf.SPC -> X14MF.SPC
[Status 00:46:36 INFO] data for X14 transferred to science data processing
[Tidy 00:46:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:46:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:46:36 INFO] resetting WatchDogTimer
[Status 00:46:36 INFO] Starting Set [AERI set: name Y14, 6 scans, 0 angle, D16300 command]
[Ingest 00:46:36 INFO] Sending XML status message
[Status 00:46:36 INFO] Mirror angle: 0
[Mirror 00:46:36 INFO] rotating to position Y
[Status 00:46:36 INFO] .SET file for ACQ96 ready
[Ingest 00:46:36 INFO] Starting acquisition
[Status 00:46:36 INFO] reading housekeeping
[Status 00:46:55 INFO] acquire complete
[Status 00:46:55 INFO] writing housekeeping
[Sequencer 00:46:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:46:55 INFO] incremented Y scene to 14 completed views
[Sequencer 00:46:55 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:46:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:46:55 INFO] incremented to [AERI set: name Z14, 6 scans, 0 angle, D16300 command] set
[sigmove 00:46:55 INFO] Y14.SIG(18)
[sigmove 00:46:55 DEBUG] transformed Y14Ma.SPC -> Y14MA.SPC
[sigmove 00:46:55 DEBUG] transformed Y14Mb.SPC -> Y14MB.SPC
[sigmove 00:46:55 DEBUG] transformed Y14Mc.SPC -> Y14MC.SPC
[sigmove 00:46:55 DEBUG] transformed Y14Md.SPC -> Y14MD.SPC
[sigmove 00:46:55 DEBUG] transformed Y14Me.SPC -> Y14ME.SPC
[sigmove 00:46:55 DEBUG] transformed Y14Mf.SPC -> Y14MF.SPC
[Status 00:46:55 INFO] data for Y14 transferred to science data processing
[Tidy 00:46:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:46:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:46:55 INFO] resetting WatchDogTimer
[Status 00:46:55 INFO] Starting Set [AERI set: name Z14, 6 scans, 0 angle, D16300 command]
[Ingest 00:46:55 INFO] Sending XML status message
[Status 00:46:55 INFO] Mirror angle: 0
[Mirror 00:46:55 INFO] rotating to position Z
[Status 00:46:55 INFO] .SET file for ACQ96 ready
[Ingest 00:46:55 INFO] Starting acquisition
[Status 00:46:55 INFO] reading housekeeping
[Status 00:47:14 INFO] acquire complete
[Status 00:47:14 INFO] writing housekeeping
[Sequencer 00:47:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:47:14 INFO] incremented Z scene to 14 completed views
[Sequencer 00:47:14 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:47:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:47:14 INFO] incremented to [AERI set: name H15, 6 scans, 60 angle, D22500 command] set
[sigmove 00:47:14 INFO] Z14.SIG(18)
[sigmove 00:47:14 DEBUG] transformed Z14Ma.SPC -> Z14MA.SPC
[sigmove 00:47:14 DEBUG] transformed Z14Mb.SPC -> Z14MB.SPC
[sigmove 00:47:14 DEBUG] transformed Z14Mc.SPC -> Z14MC.SPC
[sigmove 00:47:14 DEBUG] transformed Z14Md.SPC -> Z14MD.SPC
[sigmove 00:47:14 DEBUG] transformed Z14Me.SPC -> Z14ME.SPC
[sigmove 00:47:14 DEBUG] transformed Z14Mf.SPC -> Z14MF.SPC
[Status 00:47:14 INFO] data for Z14 transferred to science data processing
[Tidy 00:47:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:47:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:47:14 INFO] resetting WatchDogTimer
[Status 00:47:14 INFO] Starting Set [AERI set: name H15, 6 scans, 60 angle, D22500 command]
[Ingest 00:47:14 INFO] Sending XML status message
[Status 00:47:14 INFO] Mirror angle: 60
[Mirror 00:47:14 INFO] rotating to position H
[Status 00:47:15 INFO] .SET file for ACQ96 ready
[Ingest 00:47:15 INFO] Starting acquisition
[Status 00:47:15 INFO] reading housekeeping
[Status 00:47:33 INFO] acquire complete
[Status 00:47:33 INFO] writing housekeeping
[Sequencer 00:47:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:47:33 INFO] incremented H scene to 15 completed views
[Sequencer 00:47:33 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:47:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:47:33 INFO] incremented to [AERI set: name A15, 6 scans, 120 angle, D28300 command] set
[sigmove 00:47:33 INFO] H15.SIG(18)
[sigmove 00:47:33 DEBUG] transformed H15Ma.SPC -> H15MA.SPC
[sigmove 00:47:33 DEBUG] transformed H15Mb.SPC -> H15MB.SPC
[sigmove 00:47:33 DEBUG] transformed H15Mc.SPC -> H15MC.SPC
[sigmove 00:47:33 DEBUG] transformed H15Md.SPC -> H15MD.SPC
[sigmove 00:47:33 DEBUG] transformed H15Me.SPC -> H15ME.SPC
[sigmove 00:47:33 DEBUG] transformed H15Mf.SPC -> H15MF.SPC
[Status 00:47:33 INFO] data for H15 transferred to science data processing
[Tidy 00:47:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:47:33 INFO] A13.FIN(19),H13.FIN(19),S13.FIN(19),T13.FIN(19),U13.FIN(19),V13.FIN(19),W13.FIN(19),X13.FIN(19),Y13.FIN(19),Z13.FIN(19),A14.FIN(19),H14.FIN(19),S14.FIN(19),T14.FIN(19),U14.FIN(19),V14.FIN(19),W14.FIN(19),X14.FIN(19),Y14.FIN(19),Z14.FIN(19)
[sigmove 00:47:33 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:47:33 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:47:34 DEBUG] done zipping
[WatchDog 00:47:34 INFO] resetting WatchDogTimer
[Status 00:47:34 INFO] Starting Set [AERI set: name A15, 6 scans, 120 angle, D28300 command]
[Ingest 00:47:34 INFO] Sending XML status message
[Status 00:47:34 INFO] Mirror angle: 120
[Mirror 00:47:34 INFO] rotating to position A
[Status 00:47:35 INFO] .SET file for ACQ96 ready
[Ingest 00:47:35 INFO] Starting acquisition
[Status 00:47:35 INFO] reading housekeeping
[Status 00:47:53 INFO] acquire complete
[Status 00:47:53 INFO] writing housekeeping
[Sequencer 00:47:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:47:53 INFO] incremented A scene to 15 completed views
[Sequencer 00:47:53 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:47:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:47:53 INFO] incremented to [AERI set: name S15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:47:53 INFO] A15.SIG(18)
[sigmove 00:47:53 DEBUG] transformed A15Ma.SPC -> A15MA.SPC
[sigmove 00:47:53 DEBUG] transformed A15Mb.SPC -> A15MB.SPC
[sigmove 00:47:53 DEBUG] transformed A15Mc.SPC -> A15MC.SPC
[sigmove 00:47:53 DEBUG] transformed A15Md.SPC -> A15MD.SPC
[sigmove 00:47:53 DEBUG] transformed A15Me.SPC -> A15ME.SPC
[sigmove 00:47:53 DEBUG] transformed A15Mf.SPC -> A15MF.SPC
[Status 00:47:53 INFO] data for A15 transferred to science data processing
[Tidy 00:47:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:47:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:47:53 INFO] resetting WatchDogTimer
[Status 00:47:53 INFO] Starting Set [AERI set: name S15, 6 scans, 0 angle, D16300 command]
[Ingest 00:47:53 INFO] Sending XML status message
[Status 00:47:53 INFO] Mirror angle: 0
[Mirror 00:47:54 INFO] rotating to position S
[Status 00:47:55 INFO] .SET file for ACQ96 ready
[Ingest 00:47:55 INFO] Starting acquisition
[Status 00:47:55 INFO] reading housekeeping
[Status 00:48:13 INFO] acquire complete
[Status 00:48:14 INFO] writing housekeeping
[Sequencer 00:48:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:48:14 INFO] incremented S scene to 15 completed views
[Sequencer 00:48:14 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:48:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:48:14 INFO] incremented to [AERI set: name T15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:48:14 INFO] S15.SIG(18)
[sigmove 00:48:14 DEBUG] transformed S15Ma.SPC -> S15MA.SPC
[sigmove 00:48:14 DEBUG] transformed S15Mb.SPC -> S15MB.SPC
[sigmove 00:48:14 DEBUG] transformed S15Mc.SPC -> S15MC.SPC
[sigmove 00:48:14 DEBUG] transformed S15Md.SPC -> S15MD.SPC
[sigmove 00:48:14 DEBUG] transformed S15Me.SPC -> S15ME.SPC
[sigmove 00:48:14 DEBUG] transformed S15Mf.SPC -> S15MF.SPC
[Status 00:48:14 INFO] data for S15 transferred to science data processing
[Tidy 00:48:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:48:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:48:14 INFO] resetting WatchDogTimer
[Status 00:48:14 INFO] Starting Set [AERI set: name T15, 6 scans, 0 angle, D16300 command]
[Ingest 00:48:14 INFO] Sending XML status message
[Status 00:48:14 INFO] Mirror angle: 0
[Mirror 00:48:14 INFO] rotating to position T
[Status 00:48:14 INFO] .SET file for ACQ96 ready
[Ingest 00:48:14 INFO] Starting acquisition
[Status 00:48:14 INFO] reading housekeeping
[Status 00:48:32 INFO] acquire complete
[Status 00:48:33 INFO] writing housekeeping
[Sequencer 00:48:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:48:33 INFO] incremented T scene to 15 completed views
[Sequencer 00:48:33 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:48:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:48:33 INFO] incremented to [AERI set: name U15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:48:33 INFO] T15.SIG(18)
[sigmove 00:48:33 DEBUG] transformed T15Ma.SPC -> T15MA.SPC
[sigmove 00:48:33 DEBUG] transformed T15Mb.SPC -> T15MB.SPC
[sigmove 00:48:33 DEBUG] transformed T15Mc.SPC -> T15MC.SPC
[sigmove 00:48:33 DEBUG] transformed T15Md.SPC -> T15MD.SPC
[sigmove 00:48:33 DEBUG] transformed T15Me.SPC -> T15ME.SPC
[sigmove 00:48:33 DEBUG] transformed T15Mf.SPC -> T15MF.SPC
[Status 00:48:33 INFO] data for T15 transferred to science data processing
[Tidy 00:48:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:48:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:48:33 INFO] resetting WatchDogTimer
[Status 00:48:33 INFO] Starting Set [AERI set: name U15, 6 scans, 0 angle, D16300 command]
[Ingest 00:48:33 INFO] Sending XML status message
[Status 00:48:33 INFO] Mirror angle: 0
[Mirror 00:48:33 INFO] rotating to position U
[Status 00:48:33 INFO] .SET file for ACQ96 ready
[Ingest 00:48:33 INFO] Starting acquisition
[Status 00:48:33 INFO] reading housekeeping
[Status 00:48:51 INFO] acquire complete
[Status 00:48:52 INFO] writing housekeeping
[Sequencer 00:48:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:48:52 INFO] incremented U scene to 15 completed views
[Sequencer 00:48:52 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:48:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:48:52 INFO] incremented to [AERI set: name V15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:48:52 INFO] U15.SIG(18)
[sigmove 00:48:52 DEBUG] transformed U15Ma.SPC -> U15MA.SPC
[sigmove 00:48:52 DEBUG] transformed U15Mb.SPC -> U15MB.SPC
[sigmove 00:48:52 DEBUG] transformed U15Mc.SPC -> U15MC.SPC
[sigmove 00:48:52 DEBUG] transformed U15Md.SPC -> U15MD.SPC
[sigmove 00:48:52 DEBUG] transformed U15Me.SPC -> U15ME.SPC
[sigmove 00:48:52 DEBUG] transformed U15Mf.SPC -> U15MF.SPC
[Status 00:48:52 INFO] data for U15 transferred to science data processing
[Tidy 00:48:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:48:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:48:52 INFO] resetting WatchDogTimer
[Status 00:48:52 INFO] Starting Set [AERI set: name V15, 6 scans, 0 angle, D16300 command]
[Ingest 00:48:52 INFO] Sending XML status message
[Status 00:48:52 INFO] Mirror angle: 0
[Mirror 00:48:52 INFO] rotating to position V
[Status 00:48:52 INFO] .SET file for ACQ96 ready
[Ingest 00:48:52 INFO] Starting acquisition
[Status 00:48:52 INFO] reading housekeeping
[Status 00:49:11 INFO] acquire complete
[Status 00:49:11 INFO] writing housekeeping
[Sequencer 00:49:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:49:11 INFO] incremented V scene to 15 completed views
[Sequencer 00:49:11 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:49:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:49:11 INFO] incremented to [AERI set: name W15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:49:11 INFO] V15.SIG(18)
[sigmove 00:49:11 DEBUG] transformed V15Ma.SPC -> V15MA.SPC
[sigmove 00:49:11 DEBUG] transformed V15Mb.SPC -> V15MB.SPC
[sigmove 00:49:11 DEBUG] transformed V15Mc.SPC -> V15MC.SPC
[sigmove 00:49:11 DEBUG] transformed V15Md.SPC -> V15MD.SPC
[sigmove 00:49:11 DEBUG] transformed V15Me.SPC -> V15ME.SPC
[sigmove 00:49:11 DEBUG] transformed V15Mf.SPC -> V15MF.SPC
[Status 00:49:11 INFO] data for V15 transferred to science data processing
[Tidy 00:49:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:49:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:49:11 INFO] resetting WatchDogTimer
[Status 00:49:11 INFO] Starting Set [AERI set: name W15, 6 scans, 0 angle, D16300 command]
[Ingest 00:49:11 INFO] Sending XML status message
[Status 00:49:11 INFO] Mirror angle: 0
[Mirror 00:49:11 INFO] rotating to position W
[Status 00:49:11 INFO] .SET file for ACQ96 ready
[Ingest 00:49:11 INFO] Starting acquisition
[Status 00:49:11 INFO] reading housekeeping
[Status 00:49:30 INFO] acquire complete
[Status 00:49:30 INFO] writing housekeeping
[Sequencer 00:49:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:49:30 INFO] incremented W scene to 15 completed views
[Sequencer 00:49:30 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:49:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:49:30 INFO] incremented to [AERI set: name X15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:49:30 INFO] W15.SIG(18)
[sigmove 00:49:30 DEBUG] transformed W15Ma.SPC -> W15MA.SPC
[sigmove 00:49:30 DEBUG] transformed W15Mb.SPC -> W15MB.SPC
[sigmove 00:49:30 DEBUG] transformed W15Mc.SPC -> W15MC.SPC
[sigmove 00:49:30 DEBUG] transformed W15Md.SPC -> W15MD.SPC
[sigmove 00:49:30 DEBUG] transformed W15Me.SPC -> W15ME.SPC
[sigmove 00:49:30 DEBUG] transformed W15Mf.SPC -> W15MF.SPC
[Status 00:49:30 INFO] data for W15 transferred to science data processing
[Tidy 00:49:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:49:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:49:30 INFO] resetting WatchDogTimer
[Status 00:49:30 INFO] Starting Set [AERI set: name X15, 6 scans, 0 angle, D16300 command]
[Ingest 00:49:30 INFO] Sending XML status message
[Status 00:49:30 INFO] Mirror angle: 0
[Mirror 00:49:30 INFO] rotating to position X
[Status 00:49:30 INFO] .SET file for ACQ96 ready
[Ingest 00:49:30 INFO] Starting acquisition
[Status 00:49:30 INFO] reading housekeeping
[Status 00:49:49 INFO] acquire complete
[Status 00:49:49 INFO] writing housekeeping
[Sequencer 00:49:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:49:49 INFO] incremented X scene to 15 completed views
[Sequencer 00:49:49 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:49:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:49:49 INFO] incremented to [AERI set: name Y15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:49:49 INFO] X15.SIG(18)
[sigmove 00:49:49 DEBUG] transformed X15Ma.SPC -> X15MA.SPC
[sigmove 00:49:49 DEBUG] transformed X15Mb.SPC -> X15MB.SPC
[sigmove 00:49:49 DEBUG] transformed X15Mc.SPC -> X15MC.SPC
[sigmove 00:49:49 DEBUG] transformed X15Md.SPC -> X15MD.SPC
[sigmove 00:49:49 DEBUG] transformed X15Me.SPC -> X15ME.SPC
[sigmove 00:49:49 DEBUG] transformed X15Mf.SPC -> X15MF.SPC
[Status 00:49:49 INFO] data for X15 transferred to science data processing
[Tidy 00:49:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:49:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:49:49 INFO] resetting WatchDogTimer
[Status 00:49:49 INFO] Starting Set [AERI set: name Y15, 6 scans, 0 angle, D16300 command]
[Ingest 00:49:49 INFO] Sending XML status message
[Status 00:49:49 INFO] Mirror angle: 0
[Mirror 00:49:49 INFO] rotating to position Y
[Status 00:49:49 INFO] .SET file for ACQ96 ready
[Ingest 00:49:49 INFO] Starting acquisition
[Status 00:49:49 INFO] reading housekeeping
[Status 00:50:08 INFO] acquire complete
[Status 00:50:08 INFO] writing housekeeping
[Sequencer 00:50:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:50:08 INFO] incremented Y scene to 15 completed views
[Sequencer 00:50:08 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:50:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:50:08 INFO] incremented to [AERI set: name Z15, 6 scans, 0 angle, D16300 command] set
[sigmove 00:50:08 INFO] Y15.SIG(18)
[sigmove 00:50:08 DEBUG] transformed Y15Ma.SPC -> Y15MA.SPC
[sigmove 00:50:08 DEBUG] transformed Y15Mb.SPC -> Y15MB.SPC
[sigmove 00:50:08 DEBUG] transformed Y15Mc.SPC -> Y15MC.SPC
[sigmove 00:50:08 DEBUG] transformed Y15Md.SPC -> Y15MD.SPC
[sigmove 00:50:08 DEBUG] transformed Y15Me.SPC -> Y15ME.SPC
[sigmove 00:50:08 DEBUG] transformed Y15Mf.SPC -> Y15MF.SPC
[Status 00:50:08 INFO] data for Y15 transferred to science data processing
[Tidy 00:50:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:50:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:50:08 INFO] resetting WatchDogTimer
[Status 00:50:08 INFO] Starting Set [AERI set: name Z15, 6 scans, 0 angle, D16300 command]
[Ingest 00:50:08 INFO] Sending XML status message
[Status 00:50:08 INFO] Mirror angle: 0
[Mirror 00:50:08 INFO] rotating to position Z
[Status 00:50:08 INFO] .SET file for ACQ96 ready
[Ingest 00:50:08 INFO] Starting acquisition
[Status 00:50:09 INFO] reading housekeeping
[Status 00:50:27 INFO] acquire complete
[Status 00:50:27 INFO] writing housekeeping
[Sequencer 00:50:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:50:27 INFO] incremented Z scene to 15 completed views
[Sequencer 00:50:27 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:50:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:50:27 INFO] incremented to [AERI set: name A16, 6 scans, 120 angle, D28300 command] set
[sigmove 00:50:27 INFO] Z15.SIG(18)
[sigmove 00:50:27 DEBUG] transformed Z15Ma.SPC -> Z15MA.SPC
[sigmove 00:50:27 DEBUG] transformed Z15Mb.SPC -> Z15MB.SPC
[sigmove 00:50:27 DEBUG] transformed Z15Mc.SPC -> Z15MC.SPC
[sigmove 00:50:27 DEBUG] transformed Z15Md.SPC -> Z15MD.SPC
[sigmove 00:50:27 DEBUG] transformed Z15Me.SPC -> Z15ME.SPC
[sigmove 00:50:27 DEBUG] transformed Z15Mf.SPC -> Z15MF.SPC
[Status 00:50:27 INFO] data for Z15 transferred to science data processing
[Tidy 00:50:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:50:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:50:27 INFO] resetting WatchDogTimer
[Status 00:50:27 INFO] Starting Set [AERI set: name A16, 6 scans, 120 angle, D28300 command]
[Ingest 00:50:27 INFO] Sending XML status message
[Status 00:50:27 INFO] Mirror angle: 120
[Mirror 00:50:27 INFO] rotating to position A
[Status 00:50:29 INFO] .SET file for ACQ96 ready
[Ingest 00:50:29 INFO] Starting acquisition
[Status 00:50:29 INFO] reading housekeeping
[Status 00:50:47 INFO] acquire complete
[Status 00:50:47 INFO] writing housekeeping
[Sequencer 00:50:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:50:47 INFO] incremented A scene to 16 completed views
[Sequencer 00:50:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:50:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:50:47 INFO] incremented to [AERI set: name H16, 6 scans, 60 angle, D22500 command] set
[sigmove 00:50:47 INFO] A16.SIG(18)
[sigmove 00:50:47 DEBUG] transformed A16Ma.SPC -> A16MA.SPC
[sigmove 00:50:47 DEBUG] transformed A16Mb.SPC -> A16MB.SPC
[sigmove 00:50:47 DEBUG] transformed A16Mc.SPC -> A16MC.SPC
[sigmove 00:50:47 DEBUG] transformed A16Md.SPC -> A16MD.SPC
[sigmove 00:50:47 DEBUG] transformed A16Me.SPC -> A16ME.SPC
[sigmove 00:50:47 DEBUG] transformed A16Mf.SPC -> A16MF.SPC
[Status 00:50:47 INFO] data for A16 transferred to science data processing
[Tidy 00:50:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:50:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:50:47 INFO] resetting WatchDogTimer
[Status 00:50:47 INFO] Starting Set [AERI set: name H16, 6 scans, 60 angle, D22500 command]
[Ingest 00:50:47 INFO] Sending XML status message
[Status 00:50:47 INFO] Mirror angle: 60
[Mirror 00:50:48 INFO] rotating to position H
[Status 00:50:48 INFO] .SET file for ACQ96 ready
[Ingest 00:50:48 INFO] Starting acquisition
[Status 00:50:48 INFO] reading housekeeping
[Status 00:51:06 INFO] acquire complete
[Status 00:51:06 INFO] writing housekeeping
[Sequencer 00:51:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:51:06 INFO] incremented H scene to 16 completed views
[Sequencer 00:51:06 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:51:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:51:06 INFO] incremented to [AERI set: name S16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:51:06 INFO] H16.SIG(18)
[sigmove 00:51:06 DEBUG] transformed H16Ma.SPC -> H16MA.SPC
[sigmove 00:51:06 DEBUG] transformed H16Mb.SPC -> H16MB.SPC
[sigmove 00:51:06 DEBUG] transformed H16Mc.SPC -> H16MC.SPC
[sigmove 00:51:06 DEBUG] transformed H16Md.SPC -> H16MD.SPC
[sigmove 00:51:06 DEBUG] transformed H16Me.SPC -> H16ME.SPC
[sigmove 00:51:06 DEBUG] transformed H16Mf.SPC -> H16MF.SPC
[Status 00:51:06 INFO] data for H16 transferred to science data processing
[Tidy 00:51:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:51:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:51:07 INFO] resetting WatchDogTimer
[Status 00:51:07 INFO] Starting Set [AERI set: name S16, 6 scans, 0 angle, D16300 command]
[Ingest 00:51:07 INFO] Sending XML status message
[Status 00:51:07 INFO] Mirror angle: 0
[Mirror 00:51:07 INFO] rotating to position S
[Status 00:51:07 INFO] .SET file for ACQ96 ready
[Ingest 00:51:07 INFO] Starting acquisition
[Status 00:51:08 INFO] reading housekeeping
[Status 00:51:25 INFO] acquire complete
[Status 00:51:26 INFO] writing housekeeping
[Sequencer 00:51:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:51:26 INFO] incremented S scene to 16 completed views
[Sequencer 00:51:26 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:51:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:51:26 INFO] incremented to [AERI set: name T16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:51:26 INFO] S16.SIG(18)
[sigmove 00:51:26 DEBUG] transformed S16Ma.SPC -> S16MA.SPC
[sigmove 00:51:26 DEBUG] transformed S16Mb.SPC -> S16MB.SPC
[sigmove 00:51:26 DEBUG] transformed S16Mc.SPC -> S16MC.SPC
[sigmove 00:51:26 DEBUG] transformed S16Md.SPC -> S16MD.SPC
[sigmove 00:51:26 DEBUG] transformed S16Me.SPC -> S16ME.SPC
[sigmove 00:51:26 DEBUG] transformed S16Mf.SPC -> S16MF.SPC
[Status 00:51:26 INFO] data for S16 transferred to science data processing
[Tidy 00:51:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:51:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:51:26 INFO] resetting WatchDogTimer
[Status 00:51:26 INFO] Starting Set [AERI set: name T16, 6 scans, 0 angle, D16300 command]
[Ingest 00:51:26 INFO] Sending XML status message
[Status 00:51:26 INFO] Mirror angle: 0
[Mirror 00:51:26 INFO] rotating to position T
[Status 00:51:26 INFO] .SET file for ACQ96 ready
[Ingest 00:51:26 INFO] Starting acquisition
[Status 00:51:26 INFO] reading housekeeping
[Status 00:51:44 INFO] acquire complete
[Status 00:51:45 INFO] writing housekeeping
[Sequencer 00:51:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:51:45 INFO] incremented T scene to 16 completed views
[Sequencer 00:51:45 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:51:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:51:45 INFO] incremented to [AERI set: name U16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:51:45 INFO] T16.SIG(18)
[sigmove 00:51:45 DEBUG] transformed T16Ma.SPC -> T16MA.SPC
[sigmove 00:51:45 DEBUG] transformed T16Mb.SPC -> T16MB.SPC
[sigmove 00:51:45 DEBUG] transformed T16Mc.SPC -> T16MC.SPC
[sigmove 00:51:45 DEBUG] transformed T16Md.SPC -> T16MD.SPC
[sigmove 00:51:45 DEBUG] transformed T16Me.SPC -> T16ME.SPC
[sigmove 00:51:45 DEBUG] transformed T16Mf.SPC -> T16MF.SPC
[Status 00:51:45 INFO] data for T16 transferred to science data processing
[Tidy 00:51:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:51:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:51:45 INFO] resetting WatchDogTimer
[Status 00:51:45 INFO] Starting Set [AERI set: name U16, 6 scans, 0 angle, D16300 command]
[Ingest 00:51:45 INFO] Sending XML status message
[Status 00:51:45 INFO] Mirror angle: 0
[Mirror 00:51:45 INFO] rotating to position U
[Status 00:51:45 INFO] .SET file for ACQ96 ready
[Ingest 00:51:45 INFO] Starting acquisition
[Status 00:51:45 INFO] reading housekeeping
[Status 00:52:03 INFO] acquire complete
[Status 00:52:04 INFO] writing housekeeping
[Sequencer 00:52:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:52:04 INFO] incremented U scene to 16 completed views
[Sequencer 00:52:04 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:52:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:52:04 INFO] incremented to [AERI set: name V16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:52:04 INFO] U16.SIG(18)
[sigmove 00:52:04 DEBUG] transformed U16Ma.SPC -> U16MA.SPC
[sigmove 00:52:04 DEBUG] transformed U16Mb.SPC -> U16MB.SPC
[sigmove 00:52:04 DEBUG] transformed U16Mc.SPC -> U16MC.SPC
[sigmove 00:52:04 DEBUG] transformed U16Md.SPC -> U16MD.SPC
[sigmove 00:52:04 DEBUG] transformed U16Me.SPC -> U16ME.SPC
[sigmove 00:52:04 DEBUG] transformed U16Mf.SPC -> U16MF.SPC
[Status 00:52:04 INFO] data for U16 transferred to science data processing
[Tidy 00:52:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:52:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:52:04 INFO] resetting WatchDogTimer
[Status 00:52:04 INFO] Starting Set [AERI set: name V16, 6 scans, 0 angle, D16300 command]
[Ingest 00:52:04 INFO] Sending XML status message
[Status 00:52:04 INFO] Mirror angle: 0
[Mirror 00:52:04 INFO] rotating to position V
[Status 00:52:04 INFO] .SET file for ACQ96 ready
[Ingest 00:52:04 INFO] Starting acquisition
[Status 00:52:04 INFO] reading housekeeping
[Status 00:52:23 INFO] acquire complete
[Status 00:52:23 INFO] writing housekeeping
[Sequencer 00:52:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:52:23 INFO] incremented V scene to 16 completed views
[Sequencer 00:52:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:52:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:52:23 INFO] incremented to [AERI set: name W16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:52:23 INFO] V16.SIG(18)
[sigmove 00:52:23 DEBUG] transformed V16Ma.SPC -> V16MA.SPC
[sigmove 00:52:23 DEBUG] transformed V16Mb.SPC -> V16MB.SPC
[sigmove 00:52:23 DEBUG] transformed V16Mc.SPC -> V16MC.SPC
[sigmove 00:52:23 DEBUG] transformed V16Md.SPC -> V16MD.SPC
[sigmove 00:52:23 DEBUG] transformed V16Me.SPC -> V16ME.SPC
[sigmove 00:52:23 DEBUG] transformed V16Mf.SPC -> V16MF.SPC
[Status 00:52:23 INFO] data for V16 transferred to science data processing
[Tidy 00:52:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:52:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:52:23 INFO] resetting WatchDogTimer
[Status 00:52:23 INFO] Starting Set [AERI set: name W16, 6 scans, 0 angle, D16300 command]
[Ingest 00:52:23 INFO] Sending XML status message
[Status 00:52:23 INFO] Mirror angle: 0
[Mirror 00:52:23 INFO] rotating to position W
[Status 00:52:23 INFO] .SET file for ACQ96 ready
[Ingest 00:52:23 INFO] Starting acquisition
[Status 00:52:23 INFO] reading housekeeping
[Status 00:52:42 INFO] acquire complete
[Status 00:52:42 INFO] writing housekeeping
[Sequencer 00:52:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:52:42 INFO] incremented W scene to 16 completed views
[Sequencer 00:52:42 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:52:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:52:42 INFO] incremented to [AERI set: name X16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:52:42 INFO] W16.SIG(18)
[sigmove 00:52:42 DEBUG] transformed W16Ma.SPC -> W16MA.SPC
[sigmove 00:52:42 DEBUG] transformed W16Mb.SPC -> W16MB.SPC
[sigmove 00:52:42 DEBUG] transformed W16Mc.SPC -> W16MC.SPC
[sigmove 00:52:42 DEBUG] transformed W16Md.SPC -> W16MD.SPC
[sigmove 00:52:42 DEBUG] transformed W16Me.SPC -> W16ME.SPC
[sigmove 00:52:42 DEBUG] transformed W16Mf.SPC -> W16MF.SPC
[Status 00:52:42 INFO] data for W16 transferred to science data processing
[Tidy 00:52:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:52:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:52:42 INFO] resetting WatchDogTimer
[Status 00:52:42 INFO] Starting Set [AERI set: name X16, 6 scans, 0 angle, D16300 command]
[Ingest 00:52:42 INFO] Sending XML status message
[Status 00:52:42 INFO] Mirror angle: 0
[Mirror 00:52:42 INFO] rotating to position X
[Status 00:52:42 INFO] .SET file for ACQ96 ready
[Ingest 00:52:42 INFO] Starting acquisition
[Status 00:52:42 INFO] reading housekeeping
[Status 00:53:01 INFO] acquire complete
[Status 00:53:01 INFO] writing housekeeping
[Sequencer 00:53:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:53:01 INFO] incremented X scene to 16 completed views
[Sequencer 00:53:01 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:53:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:53:01 INFO] incremented to [AERI set: name Y16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:53:01 INFO] X16.SIG(18)
[sigmove 00:53:01 DEBUG] transformed X16Ma.SPC -> X16MA.SPC
[sigmove 00:53:01 DEBUG] transformed X16Mb.SPC -> X16MB.SPC
[sigmove 00:53:01 DEBUG] transformed X16Mc.SPC -> X16MC.SPC
[sigmove 00:53:01 DEBUG] transformed X16Md.SPC -> X16MD.SPC
[sigmove 00:53:01 DEBUG] transformed X16Me.SPC -> X16ME.SPC
[sigmove 00:53:01 DEBUG] transformed X16Mf.SPC -> X16MF.SPC
[Status 00:53:01 INFO] data for X16 transferred to science data processing
[Tidy 00:53:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:53:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:53:01 INFO] resetting WatchDogTimer
[Status 00:53:01 INFO] Starting Set [AERI set: name Y16, 6 scans, 0 angle, D16300 command]
[Ingest 00:53:01 INFO] Sending XML status message
[Status 00:53:01 INFO] Mirror angle: 0
[Mirror 00:53:01 INFO] rotating to position Y
[Status 00:53:01 INFO] .SET file for ACQ96 ready
[Ingest 00:53:01 INFO] Starting acquisition
[Status 00:53:01 INFO] reading housekeeping
[Status 00:53:20 INFO] acquire complete
[Status 00:53:21 INFO] writing housekeeping
[Sequencer 00:53:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:53:21 INFO] incremented Y scene to 16 completed views
[Sequencer 00:53:21 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:53:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:53:21 INFO] incremented to [AERI set: name Z16, 6 scans, 0 angle, D16300 command] set
[sigmove 00:53:21 INFO] Y16.SIG(18)
[sigmove 00:53:21 DEBUG] transformed Y16Ma.SPC -> Y16MA.SPC
[sigmove 00:53:21 DEBUG] transformed Y16Mb.SPC -> Y16MB.SPC
[sigmove 00:53:21 DEBUG] transformed Y16Mc.SPC -> Y16MC.SPC
[sigmove 00:53:21 DEBUG] transformed Y16Md.SPC -> Y16MD.SPC
[sigmove 00:53:21 DEBUG] transformed Y16Me.SPC -> Y16ME.SPC
[sigmove 00:53:21 DEBUG] transformed Y16Mf.SPC -> Y16MF.SPC
[Status 00:53:21 INFO] data for Y16 transferred to science data processing
[Tidy 00:53:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:53:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:53:21 INFO] resetting WatchDogTimer
[Status 00:53:21 INFO] Starting Set [AERI set: name Z16, 6 scans, 0 angle, D16300 command]
[Ingest 00:53:21 INFO] Sending XML status message
[Status 00:53:21 INFO] Mirror angle: 0
[Mirror 00:53:21 INFO] rotating to position Z
[Status 00:53:21 INFO] .SET file for ACQ96 ready
[Ingest 00:53:21 INFO] Starting acquisition
[Status 00:53:21 INFO] reading housekeeping
[Status 00:53:39 INFO] acquire complete
[Status 00:53:39 INFO] writing housekeeping
[Sequencer 00:53:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:53:39 INFO] incremented Z scene to 16 completed views
[Sequencer 00:53:39 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:53:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:53:39 INFO] incremented to [AERI set: name H17, 6 scans, 60 angle, D22500 command] set
[sigmove 00:53:39 INFO] Z16.SIG(18)
[sigmove 00:53:39 DEBUG] transformed Z16Ma.SPC -> Z16MA.SPC
[sigmove 00:53:39 DEBUG] transformed Z16Mb.SPC -> Z16MB.SPC
[sigmove 00:53:39 DEBUG] transformed Z16Mc.SPC -> Z16MC.SPC
[sigmove 00:53:39 DEBUG] transformed Z16Md.SPC -> Z16MD.SPC
[sigmove 00:53:39 DEBUG] transformed Z16Me.SPC -> Z16ME.SPC
[sigmove 00:53:39 DEBUG] transformed Z16Mf.SPC -> Z16MF.SPC
[Status 00:53:39 INFO] data for Z16 transferred to science data processing
[Tidy 00:53:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:53:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:53:39 INFO] resetting WatchDogTimer
[Status 00:53:39 INFO] Starting Set [AERI set: name H17, 6 scans, 60 angle, D22500 command]
[Ingest 00:53:39 INFO] Sending XML status message
[Status 00:53:39 INFO] Mirror angle: 60
[Mirror 00:53:39 INFO] rotating to position H
[Status 00:53:40 INFO] .SET file for ACQ96 ready
[Ingest 00:53:40 INFO] Starting acquisition
[Status 00:53:40 INFO] reading housekeeping
[Status 00:53:58 INFO] acquire complete
[Status 00:53:58 INFO] writing housekeeping
[Sequencer 00:53:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:53:58 INFO] incremented H scene to 17 completed views
[Sequencer 00:53:58 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:53:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:53:58 INFO] incremented to [AERI set: name A17, 6 scans, 120 angle, D28300 command] set
[sigmove 00:53:58 INFO] H17.SIG(18)
[sigmove 00:53:58 DEBUG] transformed H17Ma.SPC -> H17MA.SPC
[sigmove 00:53:58 DEBUG] transformed H17Mb.SPC -> H17MB.SPC
[sigmove 00:53:58 DEBUG] transformed H17Mc.SPC -> H17MC.SPC
[sigmove 00:53:58 DEBUG] transformed H17Md.SPC -> H17MD.SPC
[sigmove 00:53:58 DEBUG] transformed H17Me.SPC -> H17ME.SPC
[sigmove 00:53:58 DEBUG] transformed H17Mf.SPC -> H17MF.SPC
[Status 00:53:58 INFO] data for H17 transferred to science data processing
[Tidy 00:53:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:53:58 INFO] A15.FIN(19),H15.FIN(19),S15.FIN(19),T15.FIN(19),U15.FIN(19),V15.FIN(19),W15.FIN(19),X15.FIN(19),Y15.FIN(19),Z15.FIN(19),A16.FIN(19),H16.FIN(19),S16.FIN(19),T16.FIN(19),U16.FIN(19),V16.FIN(19),W16.FIN(19),X16.FIN(19),Y16.FIN(19),Z16.FIN(19)
[sigmove 00:53:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:53:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 00:53:59 DEBUG] done zipping
[WatchDog 00:53:59 INFO] resetting WatchDogTimer
[Status 00:53:59 INFO] Starting Set [AERI set: name A17, 6 scans, 120 angle, D28300 command]
[Ingest 00:53:59 INFO] Sending XML status message
[Status 00:53:59 INFO] Mirror angle: 120
[Mirror 00:53:59 INFO] rotating to position A
[Status 00:54:00 INFO] .SET file for ACQ96 ready
[Ingest 00:54:00 INFO] Starting acquisition
[Status 00:54:00 INFO] reading housekeeping
[Status 00:54:18 INFO] acquire complete
[Status 00:54:18 INFO] writing housekeeping
[Sequencer 00:54:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:54:18 INFO] incremented A scene to 17 completed views
[Sequencer 00:54:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:54:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:54:18 INFO] incremented to [AERI set: name S17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:54:18 INFO] A17.SIG(18)
[sigmove 00:54:18 DEBUG] transformed A17Ma.SPC -> A17MA.SPC
[sigmove 00:54:18 DEBUG] transformed A17Mb.SPC -> A17MB.SPC
[sigmove 00:54:18 DEBUG] transformed A17Mc.SPC -> A17MC.SPC
[sigmove 00:54:18 DEBUG] transformed A17Md.SPC -> A17MD.SPC
[sigmove 00:54:18 DEBUG] transformed A17Me.SPC -> A17ME.SPC
[sigmove 00:54:18 DEBUG] transformed A17Mf.SPC -> A17MF.SPC
[Status 00:54:19 INFO] data for A17 transferred to science data processing
[Tidy 00:54:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:54:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:54:19 INFO] resetting WatchDogTimer
[Status 00:54:19 INFO] Starting Set [AERI set: name S17, 6 scans, 0 angle, D16300 command]
[Ingest 00:54:19 INFO] Sending XML status message
[Status 00:54:19 INFO] Mirror angle: 0
[Mirror 00:54:19 INFO] rotating to position S
[Status 00:54:20 INFO] .SET file for ACQ96 ready
[Ingest 00:54:20 INFO] Starting acquisition
[Status 00:54:20 INFO] reading housekeeping
[Status 00:54:38 INFO] acquire complete
[Status 00:54:39 INFO] writing housekeeping
[Sequencer 00:54:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:54:39 INFO] incremented S scene to 17 completed views
[Sequencer 00:54:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:54:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:54:39 INFO] incremented to [AERI set: name T17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:54:39 INFO] S17.SIG(18)
[sigmove 00:54:39 DEBUG] transformed S17Ma.SPC -> S17MA.SPC
[sigmove 00:54:39 DEBUG] transformed S17Mb.SPC -> S17MB.SPC
[sigmove 00:54:39 DEBUG] transformed S17Mc.SPC -> S17MC.SPC
[sigmove 00:54:39 DEBUG] transformed S17Md.SPC -> S17MD.SPC
[sigmove 00:54:39 DEBUG] transformed S17Me.SPC -> S17ME.SPC
[sigmove 00:54:39 DEBUG] transformed S17Mf.SPC -> S17MF.SPC
[Status 00:54:39 INFO] data for S17 transferred to science data processing
[Tidy 00:54:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:54:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:54:39 INFO] resetting WatchDogTimer
[Status 00:54:39 INFO] Starting Set [AERI set: name T17, 6 scans, 0 angle, D16300 command]
[Ingest 00:54:39 INFO] Sending XML status message
[Status 00:54:39 INFO] Mirror angle: 0
[Mirror 00:54:39 INFO] rotating to position T
[Status 00:54:39 INFO] .SET file for ACQ96 ready
[Ingest 00:54:39 INFO] Starting acquisition
[Status 00:54:39 INFO] reading housekeeping
[Status 00:54:57 INFO] acquire complete
[Status 00:54:58 INFO] writing housekeeping
[Sequencer 00:54:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:54:58 INFO] incremented T scene to 17 completed views
[Sequencer 00:54:58 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:54:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:54:58 INFO] incremented to [AERI set: name U17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:54:58 INFO] T17.SIG(18)
[sigmove 00:54:58 DEBUG] transformed T17Ma.SPC -> T17MA.SPC
[sigmove 00:54:58 DEBUG] transformed T17Mb.SPC -> T17MB.SPC
[sigmove 00:54:58 DEBUG] transformed T17Mc.SPC -> T17MC.SPC
[sigmove 00:54:58 DEBUG] transformed T17Md.SPC -> T17MD.SPC
[sigmove 00:54:58 DEBUG] transformed T17Me.SPC -> T17ME.SPC
[sigmove 00:54:58 DEBUG] transformed T17Mf.SPC -> T17MF.SPC
[Status 00:54:58 INFO] data for T17 transferred to science data processing
[Tidy 00:54:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:54:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:54:58 INFO] resetting WatchDogTimer
[Status 00:54:58 INFO] Starting Set [AERI set: name U17, 6 scans, 0 angle, D16300 command]
[Ingest 00:54:58 INFO] Sending XML status message
[Status 00:54:58 INFO] Mirror angle: 0
[Mirror 00:54:58 INFO] rotating to position U
[Status 00:54:58 INFO] .SET file for ACQ96 ready
[Ingest 00:54:58 INFO] Starting acquisition
[Status 00:54:58 INFO] reading housekeeping
[Status 00:55:17 INFO] acquire complete
[Status 00:55:17 INFO] writing housekeeping
[Sequencer 00:55:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:55:17 INFO] incremented U scene to 17 completed views
[Sequencer 00:55:17 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:55:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:55:17 INFO] incremented to [AERI set: name V17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:55:17 INFO] U17.SIG(18)
[sigmove 00:55:17 DEBUG] transformed U17Ma.SPC -> U17MA.SPC
[sigmove 00:55:17 DEBUG] transformed U17Mb.SPC -> U17MB.SPC
[sigmove 00:55:17 DEBUG] transformed U17Mc.SPC -> U17MC.SPC
[sigmove 00:55:17 DEBUG] transformed U17Md.SPC -> U17MD.SPC
[sigmove 00:55:17 DEBUG] transformed U17Me.SPC -> U17ME.SPC
[sigmove 00:55:17 DEBUG] transformed U17Mf.SPC -> U17MF.SPC
[Status 00:55:17 INFO] data for U17 transferred to science data processing
[Tidy 00:55:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:55:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:55:17 INFO] resetting WatchDogTimer
[Status 00:55:17 INFO] Starting Set [AERI set: name V17, 6 scans, 0 angle, D16300 command]
[Ingest 00:55:17 INFO] Sending XML status message
[Status 00:55:17 INFO] Mirror angle: 0
[Mirror 00:55:17 INFO] rotating to position V
[Status 00:55:17 INFO] .SET file for ACQ96 ready
[Ingest 00:55:17 INFO] Starting acquisition
[Status 00:55:17 INFO] reading housekeeping
[Status 00:55:36 INFO] acquire complete
[Status 00:55:36 INFO] writing housekeeping
[Sequencer 00:55:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:55:36 INFO] incremented V scene to 17 completed views
[Sequencer 00:55:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:55:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:55:36 INFO] incremented to [AERI set: name W17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:55:36 INFO] V17.SIG(18)
[sigmove 00:55:36 DEBUG] transformed V17Ma.SPC -> V17MA.SPC
[sigmove 00:55:36 DEBUG] transformed V17Mb.SPC -> V17MB.SPC
[sigmove 00:55:36 DEBUG] transformed V17Mc.SPC -> V17MC.SPC
[sigmove 00:55:36 DEBUG] transformed V17Md.SPC -> V17MD.SPC
[sigmove 00:55:36 DEBUG] transformed V17Me.SPC -> V17ME.SPC
[sigmove 00:55:36 DEBUG] transformed V17Mf.SPC -> V17MF.SPC
[Status 00:55:36 INFO] data for V17 transferred to science data processing
[Tidy 00:55:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:55:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:55:36 INFO] resetting WatchDogTimer
[Status 00:55:36 INFO] Starting Set [AERI set: name W17, 6 scans, 0 angle, D16300 command]
[Ingest 00:55:36 INFO] Sending XML status message
[Status 00:55:36 INFO] Mirror angle: 0
[Mirror 00:55:36 INFO] rotating to position W
[Status 00:55:36 INFO] .SET file for ACQ96 ready
[Ingest 00:55:36 INFO] Starting acquisition
[Status 00:55:36 INFO] reading housekeeping
[Status 00:55:55 INFO] acquire complete
[Status 00:55:55 INFO] writing housekeeping
[Sequencer 00:55:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:55:55 INFO] incremented W scene to 17 completed views
[Sequencer 00:55:55 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:55:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:55:55 INFO] incremented to [AERI set: name X17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:55:55 INFO] W17.SIG(18)
[sigmove 00:55:55 DEBUG] transformed W17Ma.SPC -> W17MA.SPC
[sigmove 00:55:55 DEBUG] transformed W17Mb.SPC -> W17MB.SPC
[sigmove 00:55:55 DEBUG] transformed W17Mc.SPC -> W17MC.SPC
[sigmove 00:55:55 DEBUG] transformed W17Md.SPC -> W17MD.SPC
[sigmove 00:55:55 DEBUG] transformed W17Me.SPC -> W17ME.SPC
[sigmove 00:55:55 DEBUG] transformed W17Mf.SPC -> W17MF.SPC
[Status 00:55:55 INFO] data for W17 transferred to science data processing
[Tidy 00:55:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:55:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:55:55 INFO] resetting WatchDogTimer
[Status 00:55:55 INFO] Starting Set [AERI set: name X17, 6 scans, 0 angle, D16300 command]
[Ingest 00:55:55 INFO] Sending XML status message
[Status 00:55:55 INFO] Mirror angle: 0
[Mirror 00:55:55 INFO] rotating to position X
[Status 00:55:55 INFO] .SET file for ACQ96 ready
[Ingest 00:55:55 INFO] Starting acquisition
[Status 00:55:55 INFO] reading housekeeping
[Status 00:56:14 INFO] acquire complete
[Status 00:56:14 INFO] writing housekeeping
[Sequencer 00:56:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:56:14 INFO] incremented X scene to 17 completed views
[Sequencer 00:56:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:56:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:56:14 INFO] incremented to [AERI set: name Y17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:56:14 INFO] X17.SIG(18)
[sigmove 00:56:14 DEBUG] transformed X17Ma.SPC -> X17MA.SPC
[sigmove 00:56:14 DEBUG] transformed X17Mb.SPC -> X17MB.SPC
[sigmove 00:56:14 DEBUG] transformed X17Mc.SPC -> X17MC.SPC
[sigmove 00:56:14 DEBUG] transformed X17Md.SPC -> X17MD.SPC
[sigmove 00:56:14 DEBUG] transformed X17Me.SPC -> X17ME.SPC
[sigmove 00:56:14 DEBUG] transformed X17Mf.SPC -> X17MF.SPC
[Status 00:56:14 INFO] data for X17 transferred to science data processing
[Tidy 00:56:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:56:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:56:14 INFO] resetting WatchDogTimer
[Status 00:56:14 INFO] Starting Set [AERI set: name Y17, 6 scans, 0 angle, D16300 command]
[Ingest 00:56:14 INFO] Sending XML status message
[Status 00:56:14 INFO] Mirror angle: 0
[Mirror 00:56:14 INFO] rotating to position Y
[Status 00:56:14 INFO] .SET file for ACQ96 ready
[Ingest 00:56:15 INFO] Starting acquisition
[Status 00:56:15 INFO] reading housekeeping
[Status 00:56:33 INFO] acquire complete
[Status 00:56:33 INFO] writing housekeeping
[Sequencer 00:56:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:56:33 INFO] incremented Y scene to 17 completed views
[Sequencer 00:56:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:56:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:56:33 INFO] incremented to [AERI set: name Z17, 6 scans, 0 angle, D16300 command] set
[sigmove 00:56:33 INFO] Y17.SIG(18)
[sigmove 00:56:33 DEBUG] transformed Y17Ma.SPC -> Y17MA.SPC
[sigmove 00:56:33 DEBUG] transformed Y17Mb.SPC -> Y17MB.SPC
[sigmove 00:56:33 DEBUG] transformed Y17Mc.SPC -> Y17MC.SPC
[sigmove 00:56:33 DEBUG] transformed Y17Md.SPC -> Y17MD.SPC
[sigmove 00:56:33 DEBUG] transformed Y17Me.SPC -> Y17ME.SPC
[sigmove 00:56:33 DEBUG] transformed Y17Mf.SPC -> Y17MF.SPC
[Status 00:56:33 INFO] data for Y17 transferred to science data processing
[Tidy 00:56:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:56:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:56:33 INFO] resetting WatchDogTimer
[Status 00:56:33 INFO] Starting Set [AERI set: name Z17, 6 scans, 0 angle, D16300 command]
[Ingest 00:56:33 INFO] Sending XML status message
[Status 00:56:33 INFO] Mirror angle: 0
[Mirror 00:56:33 INFO] rotating to position Z
[Status 00:56:34 INFO] .SET file for ACQ96 ready
[Ingest 00:56:34 INFO] Starting acquisition
[Status 00:56:34 INFO] reading housekeeping
[Status 00:56:52 INFO] acquire complete
[Status 00:56:52 INFO] writing housekeeping
[Sequencer 00:56:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:56:52 INFO] incremented Z scene to 17 completed views
[Sequencer 00:56:52 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 00:56:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:56:52 INFO] incremented to [AERI set: name A18, 6 scans, 120 angle, D28300 command] set
[sigmove 00:56:52 INFO] Z17.SIG(18)
[sigmove 00:56:52 DEBUG] transformed Z17Ma.SPC -> Z17MA.SPC
[sigmove 00:56:52 DEBUG] transformed Z17Mb.SPC -> Z17MB.SPC
[sigmove 00:56:52 DEBUG] transformed Z17Mc.SPC -> Z17MC.SPC
[sigmove 00:56:52 DEBUG] transformed Z17Md.SPC -> Z17MD.SPC
[sigmove 00:56:52 DEBUG] transformed Z17Me.SPC -> Z17ME.SPC
[sigmove 00:56:52 DEBUG] transformed Z17Mf.SPC -> Z17MF.SPC
[Status 00:56:52 INFO] data for Z17 transferred to science data processing
[Tidy 00:56:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:56:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:56:52 INFO] resetting WatchDogTimer
[Status 00:56:52 INFO] Starting Set [AERI set: name A18, 6 scans, 120 angle, D28300 command]
[Ingest 00:56:52 INFO] Sending XML status message
[Status 00:56:52 INFO] Mirror angle: 120
[Mirror 00:56:52 INFO] rotating to position A
[Status 00:56:54 INFO] .SET file for ACQ96 ready
[Ingest 00:56:54 INFO] Starting acquisition
[Status 00:56:54 INFO] reading housekeeping
[Status 00:57:12 INFO] acquire complete
[Status 00:57:12 INFO] writing housekeeping
[Sequencer 00:57:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:57:12 INFO] incremented A scene to 18 completed views
[Sequencer 00:57:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 00:57:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:57:12 INFO] incremented to [AERI set: name H18, 6 scans, 60 angle, D22500 command] set
[sigmove 00:57:12 INFO] A18.SIG(18)
[sigmove 00:57:12 DEBUG] transformed A18Ma.SPC -> A18MA.SPC
[sigmove 00:57:12 DEBUG] transformed A18Mb.SPC -> A18MB.SPC
[sigmove 00:57:12 DEBUG] transformed A18Mc.SPC -> A18MC.SPC
[sigmove 00:57:12 DEBUG] transformed A18Md.SPC -> A18MD.SPC
[sigmove 00:57:12 DEBUG] transformed A18Me.SPC -> A18ME.SPC
[sigmove 00:57:12 DEBUG] transformed A18Mf.SPC -> A18MF.SPC
[Status 00:57:12 INFO] data for A18 transferred to science data processing
[Tidy 00:57:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:57:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:57:12 INFO] resetting WatchDogTimer
[Status 00:57:13 INFO] Starting Set [AERI set: name H18, 6 scans, 60 angle, D22500 command]
[Ingest 00:57:13 INFO] Sending XML status message
[Status 00:57:13 INFO] Mirror angle: 60
[Mirror 00:57:13 INFO] rotating to position H
[Status 00:57:13 INFO] .SET file for ACQ96 ready
[Ingest 00:57:13 INFO] Starting acquisition
[Status 00:57:13 INFO] reading housekeeping
[Status 00:57:31 INFO] acquire complete
[Status 00:57:32 INFO] writing housekeeping
[Sequencer 00:57:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:57:32 INFO] incremented H scene to 18 completed views
[Sequencer 00:57:32 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 00:57:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:57:32 INFO] incremented to [AERI set: name S18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:57:32 INFO] H18.SIG(18)
[sigmove 00:57:32 DEBUG] transformed H18Ma.SPC -> H18MA.SPC
[sigmove 00:57:32 DEBUG] transformed H18Mb.SPC -> H18MB.SPC
[sigmove 00:57:32 DEBUG] transformed H18Mc.SPC -> H18MC.SPC
[sigmove 00:57:32 DEBUG] transformed H18Md.SPC -> H18MD.SPC
[sigmove 00:57:32 DEBUG] transformed H18Me.SPC -> H18ME.SPC
[sigmove 00:57:32 DEBUG] transformed H18Mf.SPC -> H18MF.SPC
[Status 00:57:32 INFO] data for H18 transferred to science data processing
[Tidy 00:57:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:57:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:57:32 INFO] resetting WatchDogTimer
[Status 00:57:32 INFO] Starting Set [AERI set: name S18, 6 scans, 0 angle, D16300 command]
[Ingest 00:57:32 INFO] Sending XML status message
[Status 00:57:32 INFO] Mirror angle: 0
[Mirror 00:57:32 INFO] rotating to position S
[Status 00:57:32 INFO] .SET file for ACQ96 ready
[Ingest 00:57:33 INFO] Starting acquisition
[Status 00:57:33 INFO] reading housekeeping
[Status 00:57:50 INFO] acquire complete
[Status 00:57:51 INFO] writing housekeeping
[Sequencer 00:57:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:57:51 INFO] incremented S scene to 18 completed views
[Sequencer 00:57:51 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:57:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:57:51 INFO] incremented to [AERI set: name T18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:57:51 INFO] S18.SIG(18)
[sigmove 00:57:51 DEBUG] transformed S18Ma.SPC -> S18MA.SPC
[sigmove 00:57:51 DEBUG] transformed S18Mb.SPC -> S18MB.SPC
[sigmove 00:57:51 DEBUG] transformed S18Mc.SPC -> S18MC.SPC
[sigmove 00:57:51 DEBUG] transformed S18Md.SPC -> S18MD.SPC
[sigmove 00:57:51 DEBUG] transformed S18Me.SPC -> S18ME.SPC
[sigmove 00:57:51 DEBUG] transformed S18Mf.SPC -> S18MF.SPC
[Status 00:57:51 INFO] data for S18 transferred to science data processing
[Tidy 00:57:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:57:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:57:51 INFO] resetting WatchDogTimer
[Status 00:57:51 INFO] Starting Set [AERI set: name T18, 6 scans, 0 angle, D16300 command]
[Ingest 00:57:51 INFO] Sending XML status message
[Status 00:57:51 INFO] Mirror angle: 0
[Mirror 00:57:51 INFO] rotating to position T
[Status 00:57:51 INFO] .SET file for ACQ96 ready
[Ingest 00:57:51 INFO] Starting acquisition
[Status 00:57:51 INFO] reading housekeeping
[Status 00:58:09 INFO] acquire complete
[Status 00:58:10 INFO] writing housekeeping
[Sequencer 00:58:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:58:10 INFO] incremented T scene to 18 completed views
[Sequencer 00:58:10 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:58:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:58:10 INFO] incremented to [AERI set: name U18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:58:10 INFO] T18.SIG(18)
[sigmove 00:58:10 DEBUG] transformed T18Ma.SPC -> T18MA.SPC
[sigmove 00:58:10 DEBUG] transformed T18Mb.SPC -> T18MB.SPC
[sigmove 00:58:10 DEBUG] transformed T18Mc.SPC -> T18MC.SPC
[sigmove 00:58:10 DEBUG] transformed T18Md.SPC -> T18MD.SPC
[sigmove 00:58:10 DEBUG] transformed T18Me.SPC -> T18ME.SPC
[sigmove 00:58:10 DEBUG] transformed T18Mf.SPC -> T18MF.SPC
[Status 00:58:10 INFO] data for T18 transferred to science data processing
[Tidy 00:58:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:58:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:58:10 INFO] resetting WatchDogTimer
[Status 00:58:10 INFO] Starting Set [AERI set: name U18, 6 scans, 0 angle, D16300 command]
[Ingest 00:58:10 INFO] Sending XML status message
[Status 00:58:10 INFO] Mirror angle: 0
[Mirror 00:58:10 INFO] rotating to position U
[Status 00:58:10 INFO] .SET file for ACQ96 ready
[Ingest 00:58:10 INFO] Starting acquisition
[Status 00:58:10 INFO] reading housekeeping
[Status 00:58:29 INFO] acquire complete
[Status 00:58:29 INFO] writing housekeeping
[Sequencer 00:58:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:58:29 INFO] incremented U scene to 18 completed views
[Sequencer 00:58:29 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:58:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:58:29 INFO] incremented to [AERI set: name V18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:58:29 INFO] U18.SIG(18)
[sigmove 00:58:29 DEBUG] transformed U18Ma.SPC -> U18MA.SPC
[sigmove 00:58:29 DEBUG] transformed U18Mb.SPC -> U18MB.SPC
[sigmove 00:58:29 DEBUG] transformed U18Mc.SPC -> U18MC.SPC
[sigmove 00:58:29 DEBUG] transformed U18Md.SPC -> U18MD.SPC
[sigmove 00:58:29 DEBUG] transformed U18Me.SPC -> U18ME.SPC
[sigmove 00:58:29 DEBUG] transformed U18Mf.SPC -> U18MF.SPC
[Status 00:58:29 INFO] data for U18 transferred to science data processing
[Tidy 00:58:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:58:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:58:29 INFO] resetting WatchDogTimer
[Status 00:58:29 INFO] Starting Set [AERI set: name V18, 6 scans, 0 angle, D16300 command]
[Ingest 00:58:29 INFO] Sending XML status message
[Status 00:58:29 INFO] Mirror angle: 0
[Mirror 00:58:29 INFO] rotating to position V
[Status 00:58:29 INFO] .SET file for ACQ96 ready
[Ingest 00:58:29 INFO] Starting acquisition
[Status 00:58:29 INFO] reading housekeeping
[Status 00:58:48 INFO] acquire complete
[Status 00:58:48 INFO] writing housekeeping
[Sequencer 00:58:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:58:48 INFO] incremented V scene to 18 completed views
[Sequencer 00:58:48 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:58:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:58:48 INFO] incremented to [AERI set: name W18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:58:48 INFO] V18.SIG(18)
[sigmove 00:58:48 DEBUG] transformed V18Ma.SPC -> V18MA.SPC
[sigmove 00:58:48 DEBUG] transformed V18Mb.SPC -> V18MB.SPC
[sigmove 00:58:48 DEBUG] transformed V18Mc.SPC -> V18MC.SPC
[sigmove 00:58:48 DEBUG] transformed V18Md.SPC -> V18MD.SPC
[sigmove 00:58:48 DEBUG] transformed V18Me.SPC -> V18ME.SPC
[sigmove 00:58:48 DEBUG] transformed V18Mf.SPC -> V18MF.SPC
[Status 00:58:48 INFO] data for V18 transferred to science data processing
[Tidy 00:58:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:58:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:58:48 INFO] resetting WatchDogTimer
[Status 00:58:48 INFO] Starting Set [AERI set: name W18, 6 scans, 0 angle, D16300 command]
[Ingest 00:58:48 INFO] Sending XML status message
[Status 00:58:48 INFO] Mirror angle: 0
[Mirror 00:58:48 INFO] rotating to position W
[Status 00:58:48 INFO] .SET file for ACQ96 ready
[Ingest 00:58:48 INFO] Starting acquisition
[Status 00:58:48 INFO] reading housekeeping
[Status 00:59:07 INFO] acquire complete
[Status 00:59:08 INFO] writing housekeeping
[Sequencer 00:59:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:59:08 INFO] incremented W scene to 18 completed views
[Sequencer 00:59:08 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:59:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:59:08 INFO] incremented to [AERI set: name X18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:59:08 INFO] W18.SIG(18)
[sigmove 00:59:08 DEBUG] transformed W18Ma.SPC -> W18MA.SPC
[sigmove 00:59:08 DEBUG] transformed W18Mb.SPC -> W18MB.SPC
[sigmove 00:59:08 DEBUG] transformed W18Mc.SPC -> W18MC.SPC
[sigmove 00:59:08 DEBUG] transformed W18Md.SPC -> W18MD.SPC
[sigmove 00:59:08 DEBUG] transformed W18Me.SPC -> W18ME.SPC
[sigmove 00:59:08 DEBUG] transformed W18Mf.SPC -> W18MF.SPC
[Status 00:59:08 INFO] data for W18 transferred to science data processing
[Tidy 00:59:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:59:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:59:08 INFO] resetting WatchDogTimer
[Status 00:59:08 INFO] Starting Set [AERI set: name X18, 6 scans, 0 angle, D16300 command]
[Ingest 00:59:08 INFO] Sending XML status message
[Status 00:59:08 INFO] Mirror angle: 0
[Mirror 00:59:08 INFO] rotating to position X
[Status 00:59:08 INFO] .SET file for ACQ96 ready
[Ingest 00:59:08 INFO] Starting acquisition
[Status 00:59:08 INFO] reading housekeeping
[Status 00:59:26 INFO] acquire complete
[Status 00:59:26 INFO] writing housekeeping
[Sequencer 00:59:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:59:26 INFO] incremented X scene to 18 completed views
[Sequencer 00:59:26 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:59:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:59:26 INFO] incremented to [AERI set: name Y18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:59:26 INFO] X18.SIG(18)
[sigmove 00:59:26 DEBUG] transformed X18Ma.SPC -> X18MA.SPC
[sigmove 00:59:26 DEBUG] transformed X18Mb.SPC -> X18MB.SPC
[sigmove 00:59:26 DEBUG] transformed X18Mc.SPC -> X18MC.SPC
[sigmove 00:59:26 DEBUG] transformed X18Md.SPC -> X18MD.SPC
[sigmove 00:59:26 DEBUG] transformed X18Me.SPC -> X18ME.SPC
[sigmove 00:59:26 DEBUG] transformed X18Mf.SPC -> X18MF.SPC
[Status 00:59:26 INFO] data for X18 transferred to science data processing
[Tidy 00:59:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:59:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:59:26 INFO] resetting WatchDogTimer
[Status 00:59:26 INFO] Starting Set [AERI set: name Y18, 6 scans, 0 angle, D16300 command]
[Ingest 00:59:26 INFO] Sending XML status message
[Status 00:59:26 INFO] Mirror angle: 0
[Mirror 00:59:26 INFO] rotating to position Y
[Status 00:59:26 INFO] .SET file for ACQ96 ready
[Ingest 00:59:27 INFO] Starting acquisition
[Status 00:59:27 INFO] reading housekeeping
[Status 00:59:45 INFO] acquire complete
[Status 00:59:45 INFO] writing housekeeping
[Sequencer 00:59:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 00:59:45 INFO] incremented Y scene to 18 completed views
[Sequencer 00:59:45 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 00:59:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 00:59:45 INFO] incremented to [AERI set: name Z18, 6 scans, 0 angle, D16300 command] set
[sigmove 00:59:45 INFO] Y18.SIG(18)
[sigmove 00:59:45 DEBUG] transformed Y18Ma.SPC -> Y18MA.SPC
[sigmove 00:59:45 DEBUG] transformed Y18Mb.SPC -> Y18MB.SPC
[sigmove 00:59:45 DEBUG] transformed Y18Mc.SPC -> Y18MC.SPC
[sigmove 00:59:45 DEBUG] transformed Y18Md.SPC -> Y18MD.SPC
[sigmove 00:59:45 DEBUG] transformed Y18Me.SPC -> Y18ME.SPC
[sigmove 00:59:45 DEBUG] transformed Y18Mf.SPC -> Y18MF.SPC
[Status 00:59:45 INFO] data for Y18 transferred to science data processing
[Tidy 00:59:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 00:59:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 00:59:45 INFO] resetting WatchDogTimer
[Status 00:59:45 INFO] Starting Set [AERI set: name Z18, 6 scans, 0 angle, D16300 command]
[Ingest 00:59:45 INFO] Sending XML status message
[Status 00:59:45 INFO] Mirror angle: 0
[Mirror 00:59:45 INFO] rotating to position Z
[Status 00:59:46 INFO] .SET file for ACQ96 ready
[Ingest 00:59:46 INFO] Starting acquisition
[Status 00:59:46 INFO] reading housekeeping
[Status 01:00:04 INFO] acquire complete
[Status 01:00:04 INFO] writing housekeeping
[Sequencer 01:00:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:00:04 INFO] incremented Z scene to 18 completed views
[Sequencer 01:00:04 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:00:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:00:04 INFO] incremented to [AERI set: name H19, 6 scans, 60 angle, D22500 command] set
[sigmove 01:00:04 INFO] Z18.SIG(18)
[sigmove 01:00:04 DEBUG] transformed Z18Ma.SPC -> Z18MA.SPC
[sigmove 01:00:04 DEBUG] transformed Z18Mb.SPC -> Z18MB.SPC
[sigmove 01:00:04 DEBUG] transformed Z18Mc.SPC -> Z18MC.SPC
[sigmove 01:00:04 DEBUG] transformed Z18Md.SPC -> Z18MD.SPC
[sigmove 01:00:04 DEBUG] transformed Z18Me.SPC -> Z18ME.SPC
[sigmove 01:00:04 DEBUG] transformed Z18Mf.SPC -> Z18MF.SPC
[Status 01:00:04 INFO] data for Z18 transferred to science data processing
[Tidy 01:00:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:00:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:00:04 INFO] resetting WatchDogTimer
[Status 01:00:04 INFO] Starting Set [AERI set: name H19, 6 scans, 60 angle, D22500 command]
[Ingest 01:00:04 INFO] Sending XML status message
[Status 01:00:04 INFO] Mirror angle: 60
[Mirror 01:00:04 INFO] rotating to position H
[Status 01:00:05 INFO] .SET file for ACQ96 ready
[Ingest 01:00:05 INFO] Starting acquisition
[Status 01:00:05 INFO] reading housekeeping
[Status 01:00:23 INFO] acquire complete
[Status 01:00:23 INFO] writing housekeeping
[Sequencer 01:00:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:00:23 INFO] incremented H scene to 19 completed views
[Sequencer 01:00:23 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:00:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:00:23 INFO] incremented to [AERI set: name A19, 6 scans, 120 angle, D28300 command] set
[sigmove 01:00:23 INFO] H19.SIG(18)
[sigmove 01:00:23 DEBUG] transformed H19Ma.SPC -> H19MA.SPC
[sigmove 01:00:23 DEBUG] transformed H19Mb.SPC -> H19MB.SPC
[sigmove 01:00:23 DEBUG] transformed H19Mc.SPC -> H19MC.SPC
[sigmove 01:00:23 DEBUG] transformed H19Md.SPC -> H19MD.SPC
[sigmove 01:00:23 DEBUG] transformed H19Me.SPC -> H19ME.SPC
[sigmove 01:00:23 DEBUG] transformed H19Mf.SPC -> H19MF.SPC
[Status 01:00:23 INFO] data for H19 transferred to science data processing
[Tidy 01:00:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:00:23 INFO] A17.FIN(19),H17.FIN(19),S17.FIN(19),T17.FIN(19),U17.FIN(19),V17.FIN(19),W17.FIN(19),X17.FIN(19),Y17.FIN(19),Z17.FIN(19),A18.FIN(19),H18.FIN(19),S18.FIN(19),T18.FIN(19),U18.FIN(19),V18.FIN(19),W18.FIN(19),X18.FIN(19),Y18.FIN(19),Z18.FIN(19)
[sigmove 01:00:23 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:00:23 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:00:24 DEBUG] done zipping
[WatchDog 01:00:24 INFO] resetting WatchDogTimer
[Status 01:00:24 INFO] Starting Set [AERI set: name A19, 6 scans, 120 angle, D28300 command]
[Ingest 01:00:24 INFO] Sending XML status message
[Status 01:00:24 INFO] Mirror angle: 120
[Mirror 01:00:24 INFO] rotating to position A
[Status 01:00:25 INFO] .SET file for ACQ96 ready
[Ingest 01:00:25 INFO] Starting acquisition
[Status 01:00:25 INFO] reading housekeeping
[Status 01:00:43 INFO] acquire complete
[Status 01:00:44 INFO] writing housekeeping
[Sequencer 01:00:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:00:44 INFO] incremented A scene to 19 completed views
[Sequencer 01:00:44 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:00:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:00:44 INFO] incremented to [AERI set: name S19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:00:44 INFO] A19.SIG(18)
[sigmove 01:00:44 DEBUG] transformed A19Ma.SPC -> A19MA.SPC
[sigmove 01:00:44 DEBUG] transformed A19Mb.SPC -> A19MB.SPC
[sigmove 01:00:44 DEBUG] transformed A19Mc.SPC -> A19MC.SPC
[sigmove 01:00:44 DEBUG] transformed A19Md.SPC -> A19MD.SPC
[sigmove 01:00:44 DEBUG] transformed A19Me.SPC -> A19ME.SPC
[sigmove 01:00:44 DEBUG] transformed A19Mf.SPC -> A19MF.SPC
[Status 01:00:44 INFO] data for A19 transferred to science data processing
[Tidy 01:00:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:00:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:00:44 INFO] resetting WatchDogTimer
[Status 01:00:44 INFO] Starting Set [AERI set: name S19, 6 scans, 0 angle, D16300 command]
[Ingest 01:00:44 INFO] Sending XML status message
[Status 01:00:44 INFO] Mirror angle: 0
[Mirror 01:00:44 INFO] rotating to position S
[Status 01:00:45 INFO] .SET file for ACQ96 ready
[Ingest 01:00:45 INFO] Starting acquisition
[Status 01:00:45 INFO] reading housekeeping
[Status 01:01:03 INFO] acquire complete
[Status 01:01:04 INFO] writing housekeeping
[Sequencer 01:01:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:01:04 INFO] incremented S scene to 19 completed views
[Sequencer 01:01:04 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:01:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:01:04 INFO] incremented to [AERI set: name T19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:01:04 INFO] S19.SIG(18)
[sigmove 01:01:04 DEBUG] transformed S19Ma.SPC -> S19MA.SPC
[sigmove 01:01:04 DEBUG] transformed S19Mb.SPC -> S19MB.SPC
[sigmove 01:01:04 DEBUG] transformed S19Mc.SPC -> S19MC.SPC
[sigmove 01:01:04 DEBUG] transformed S19Md.SPC -> S19MD.SPC
[sigmove 01:01:04 DEBUG] transformed S19Me.SPC -> S19ME.SPC
[sigmove 01:01:04 DEBUG] transformed S19Mf.SPC -> S19MF.SPC
[Status 01:01:04 INFO] data for S19 transferred to science data processing
[Tidy 01:01:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:01:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:01:04 INFO] resetting WatchDogTimer
[Status 01:01:04 INFO] Starting Set [AERI set: name T19, 6 scans, 0 angle, D16300 command]
[Ingest 01:01:04 INFO] Sending XML status message
[Status 01:01:04 INFO] Mirror angle: 0
[Mirror 01:01:04 INFO] rotating to position T
[Status 01:01:04 INFO] .SET file for ACQ96 ready
[Ingest 01:01:04 INFO] Starting acquisition
[Status 01:01:04 INFO] reading housekeeping
[Status 01:01:23 INFO] acquire complete
[Status 01:01:23 INFO] writing housekeeping
[Sequencer 01:01:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:01:23 INFO] incremented T scene to 19 completed views
[Sequencer 01:01:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:01:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:01:23 INFO] incremented to [AERI set: name U19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:01:23 INFO] T19.SIG(18)
[sigmove 01:01:23 DEBUG] transformed T19Ma.SPC -> T19MA.SPC
[sigmove 01:01:23 DEBUG] transformed T19Mb.SPC -> T19MB.SPC
[sigmove 01:01:23 DEBUG] transformed T19Mc.SPC -> T19MC.SPC
[sigmove 01:01:23 DEBUG] transformed T19Md.SPC -> T19MD.SPC
[sigmove 01:01:23 DEBUG] transformed T19Me.SPC -> T19ME.SPC
[sigmove 01:01:23 DEBUG] transformed T19Mf.SPC -> T19MF.SPC
[Status 01:01:23 INFO] data for T19 transferred to science data processing
[Tidy 01:01:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:01:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:01:23 INFO] resetting WatchDogTimer
[Status 01:01:23 INFO] Starting Set [AERI set: name U19, 6 scans, 0 angle, D16300 command]
[Ingest 01:01:23 INFO] Sending XML status message
[Status 01:01:23 INFO] Mirror angle: 0
[Mirror 01:01:23 INFO] rotating to position U
[Status 01:01:23 INFO] .SET file for ACQ96 ready
[Ingest 01:01:23 INFO] Starting acquisition
[Status 01:01:23 INFO] reading housekeeping
[Status 01:01:42 INFO] acquire complete
[Status 01:01:42 INFO] writing housekeeping
[Sequencer 01:01:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:01:42 INFO] incremented U scene to 19 completed views
[Sequencer 01:01:42 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:01:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:01:42 INFO] incremented to [AERI set: name V19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:01:42 INFO] U19.SIG(18)
[sigmove 01:01:42 DEBUG] transformed U19Ma.SPC -> U19MA.SPC
[sigmove 01:01:42 DEBUG] transformed U19Mb.SPC -> U19MB.SPC
[sigmove 01:01:42 DEBUG] transformed U19Mc.SPC -> U19MC.SPC
[sigmove 01:01:42 DEBUG] transformed U19Md.SPC -> U19MD.SPC
[sigmove 01:01:42 DEBUG] transformed U19Me.SPC -> U19ME.SPC
[sigmove 01:01:42 DEBUG] transformed U19Mf.SPC -> U19MF.SPC
[Status 01:01:42 INFO] data for U19 transferred to science data processing
[Tidy 01:01:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:01:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:01:42 INFO] resetting WatchDogTimer
[Status 01:01:42 INFO] Starting Set [AERI set: name V19, 6 scans, 0 angle, D16300 command]
[Ingest 01:01:42 INFO] Sending XML status message
[Status 01:01:42 INFO] Mirror angle: 0
[Mirror 01:01:42 INFO] rotating to position V
[Status 01:01:42 INFO] .SET file for ACQ96 ready
[Ingest 01:01:42 INFO] Starting acquisition
[Status 01:01:42 INFO] reading housekeeping
[Status 01:02:01 INFO] acquire complete
[Status 01:02:01 INFO] writing housekeeping
[Sequencer 01:02:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:02:01 INFO] incremented V scene to 19 completed views
[Sequencer 01:02:01 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:02:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:02:01 INFO] incremented to [AERI set: name W19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:02:01 INFO] V19.SIG(18)
[sigmove 01:02:01 DEBUG] transformed V19Ma.SPC -> V19MA.SPC
[sigmove 01:02:01 DEBUG] transformed V19Mb.SPC -> V19MB.SPC
[sigmove 01:02:01 DEBUG] transformed V19Mc.SPC -> V19MC.SPC
[sigmove 01:02:01 DEBUG] transformed V19Md.SPC -> V19MD.SPC
[sigmove 01:02:01 DEBUG] transformed V19Me.SPC -> V19ME.SPC
[sigmove 01:02:01 DEBUG] transformed V19Mf.SPC -> V19MF.SPC
[Status 01:02:01 INFO] data for V19 transferred to science data processing
[Tidy 01:02:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:02:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:02:01 INFO] resetting WatchDogTimer
[Status 01:02:01 INFO] Starting Set [AERI set: name W19, 6 scans, 0 angle, D16300 command]
[Ingest 01:02:01 INFO] Sending XML status message
[Status 01:02:01 INFO] Mirror angle: 0
[Mirror 01:02:01 INFO] rotating to position W
[Status 01:02:01 INFO] .SET file for ACQ96 ready
[Ingest 01:02:01 INFO] Starting acquisition
[Status 01:02:02 INFO] reading housekeeping
[Status 01:02:20 INFO] acquire complete
[Status 01:02:20 INFO] writing housekeeping
[Sequencer 01:02:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:02:20 INFO] incremented W scene to 19 completed views
[Sequencer 01:02:20 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:02:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:02:20 INFO] incremented to [AERI set: name X19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:02:20 INFO] W19.SIG(18)
[sigmove 01:02:20 DEBUG] transformed W19Ma.SPC -> W19MA.SPC
[sigmove 01:02:20 DEBUG] transformed W19Mb.SPC -> W19MB.SPC
[sigmove 01:02:20 DEBUG] transformed W19Mc.SPC -> W19MC.SPC
[sigmove 01:02:20 DEBUG] transformed W19Md.SPC -> W19MD.SPC
[sigmove 01:02:20 DEBUG] transformed W19Me.SPC -> W19ME.SPC
[sigmove 01:02:20 DEBUG] transformed W19Mf.SPC -> W19MF.SPC
[Status 01:02:20 INFO] data for W19 transferred to science data processing
[Tidy 01:02:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:02:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:02:20 INFO] resetting WatchDogTimer
[Status 01:02:20 INFO] Starting Set [AERI set: name X19, 6 scans, 0 angle, D16300 command]
[Ingest 01:02:20 INFO] Sending XML status message
[Status 01:02:20 INFO] Mirror angle: 0
[Mirror 01:02:20 INFO] rotating to position X
[Status 01:02:20 INFO] .SET file for ACQ96 ready
[Ingest 01:02:21 INFO] Starting acquisition
[Status 01:02:21 INFO] reading housekeeping
[Status 01:02:39 INFO] acquire complete
[Status 01:02:39 INFO] writing housekeeping
[Sequencer 01:02:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:02:39 INFO] incremented X scene to 19 completed views
[Sequencer 01:02:39 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:02:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:02:39 INFO] incremented to [AERI set: name Y19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:02:39 INFO] X19.SIG(18)
[sigmove 01:02:39 DEBUG] transformed X19Ma.SPC -> X19MA.SPC
[sigmove 01:02:39 DEBUG] transformed X19Mb.SPC -> X19MB.SPC
[sigmove 01:02:39 DEBUG] transformed X19Mc.SPC -> X19MC.SPC
[sigmove 01:02:39 DEBUG] transformed X19Md.SPC -> X19MD.SPC
[sigmove 01:02:39 DEBUG] transformed X19Me.SPC -> X19ME.SPC
[sigmove 01:02:39 DEBUG] transformed X19Mf.SPC -> X19MF.SPC
[Status 01:02:39 INFO] data for X19 transferred to science data processing
[Tidy 01:02:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:02:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:02:39 INFO] resetting WatchDogTimer
[Status 01:02:39 INFO] Starting Set [AERI set: name Y19, 6 scans, 0 angle, D16300 command]
[Ingest 01:02:39 INFO] Sending XML status message
[Status 01:02:39 INFO] Mirror angle: 0
[Mirror 01:02:39 INFO] rotating to position Y
[Status 01:02:40 INFO] .SET file for ACQ96 ready
[Ingest 01:02:40 INFO] Starting acquisition
[Status 01:02:40 INFO] reading housekeeping
[Status 01:02:58 INFO] acquire complete
[Status 01:02:58 INFO] writing housekeeping
[Sequencer 01:02:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:02:58 INFO] incremented Y scene to 19 completed views
[Sequencer 01:02:58 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:02:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:02:58 INFO] incremented to [AERI set: name Z19, 6 scans, 0 angle, D16300 command] set
[sigmove 01:02:58 INFO] Y19.SIG(18)
[sigmove 01:02:58 DEBUG] transformed Y19Ma.SPC -> Y19MA.SPC
[sigmove 01:02:58 DEBUG] transformed Y19Mb.SPC -> Y19MB.SPC
[sigmove 01:02:58 DEBUG] transformed Y19Mc.SPC -> Y19MC.SPC
[sigmove 01:02:58 DEBUG] transformed Y19Md.SPC -> Y19MD.SPC
[sigmove 01:02:58 DEBUG] transformed Y19Me.SPC -> Y19ME.SPC
[sigmove 01:02:58 DEBUG] transformed Y19Mf.SPC -> Y19MF.SPC
[Status 01:02:58 INFO] data for Y19 transferred to science data processing
[Tidy 01:02:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:02:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:02:58 INFO] resetting WatchDogTimer
[Status 01:02:58 INFO] Starting Set [AERI set: name Z19, 6 scans, 0 angle, D16300 command]
[Ingest 01:02:58 INFO] Sending XML status message
[Status 01:02:58 INFO] Mirror angle: 0
[Mirror 01:02:58 INFO] rotating to position Z
[Status 01:02:59 INFO] .SET file for ACQ96 ready
[Ingest 01:02:59 INFO] Starting acquisition
[Status 01:02:59 INFO] reading housekeeping
[Status 01:03:17 INFO] acquire complete
[Status 01:03:17 INFO] writing housekeeping
[Sequencer 01:03:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:03:17 INFO] incremented Z scene to 19 completed views
[Sequencer 01:03:17 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:03:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:03:17 INFO] incremented to [AERI set: name A20, 6 scans, 120 angle, D28300 command] set
[sigmove 01:03:17 INFO] Z19.SIG(18)
[sigmove 01:03:17 DEBUG] transformed Z19Ma.SPC -> Z19MA.SPC
[sigmove 01:03:17 DEBUG] transformed Z19Mb.SPC -> Z19MB.SPC
[sigmove 01:03:17 DEBUG] transformed Z19Mc.SPC -> Z19MC.SPC
[sigmove 01:03:17 DEBUG] transformed Z19Md.SPC -> Z19MD.SPC
[sigmove 01:03:17 DEBUG] transformed Z19Me.SPC -> Z19ME.SPC
[sigmove 01:03:17 DEBUG] transformed Z19Mf.SPC -> Z19MF.SPC
[Status 01:03:17 INFO] data for Z19 transferred to science data processing
[Tidy 01:03:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:03:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:03:17 INFO] resetting WatchDogTimer
[Status 01:03:17 INFO] Starting Set [AERI set: name A20, 6 scans, 120 angle, D28300 command]
[Ingest 01:03:17 INFO] Sending XML status message
[Status 01:03:17 INFO] Mirror angle: 120
[Mirror 01:03:18 INFO] rotating to position A
[Status 01:03:19 INFO] .SET file for ACQ96 ready
[Ingest 01:03:19 INFO] Starting acquisition
[Status 01:03:19 INFO] reading housekeeping
[Status 01:03:37 INFO] acquire complete
[Status 01:03:38 INFO] writing housekeeping
[Sequencer 01:03:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:03:38 INFO] incremented A scene to 20 completed views
[Sequencer 01:03:38 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:03:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:03:38 INFO] incremented to [AERI set: name H20, 6 scans, 60 angle, D22500 command] set
[sigmove 01:03:38 INFO] A20.SIG(18)
[sigmove 01:03:38 DEBUG] transformed A20Ma.SPC -> A20MA.SPC
[sigmove 01:03:38 DEBUG] transformed A20Mb.SPC -> A20MB.SPC
[sigmove 01:03:38 DEBUG] transformed A20Mc.SPC -> A20MC.SPC
[sigmove 01:03:38 DEBUG] transformed A20Md.SPC -> A20MD.SPC
[sigmove 01:03:38 DEBUG] transformed A20Me.SPC -> A20ME.SPC
[sigmove 01:03:38 DEBUG] transformed A20Mf.SPC -> A20MF.SPC
[Status 01:03:38 INFO] data for A20 transferred to science data processing
[Tidy 01:03:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:03:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:03:38 INFO] resetting WatchDogTimer
[Status 01:03:38 INFO] Starting Set [AERI set: name H20, 6 scans, 60 angle, D22500 command]
[Ingest 01:03:38 INFO] Sending XML status message
[Status 01:03:38 INFO] Mirror angle: 60
[Mirror 01:03:38 INFO] rotating to position H
[Status 01:03:38 INFO] .SET file for ACQ96 ready
[Ingest 01:03:39 INFO] Starting acquisition
[Status 01:03:39 INFO] reading housekeeping
[Status 01:03:56 INFO] acquire complete
[Status 01:03:57 INFO] writing housekeeping
[Sequencer 01:03:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:03:57 INFO] incremented H scene to 20 completed views
[Sequencer 01:03:57 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:03:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:03:57 INFO] incremented to [AERI set: name S20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:03:57 INFO] H20.SIG(18)
[sigmove 01:03:57 DEBUG] transformed H20Ma.SPC -> H20MA.SPC
[sigmove 01:03:57 DEBUG] transformed H20Mb.SPC -> H20MB.SPC
[sigmove 01:03:57 DEBUG] transformed H20Mc.SPC -> H20MC.SPC
[sigmove 01:03:57 DEBUG] transformed H20Md.SPC -> H20MD.SPC
[sigmove 01:03:57 DEBUG] transformed H20Me.SPC -> H20ME.SPC
[sigmove 01:03:57 DEBUG] transformed H20Mf.SPC -> H20MF.SPC
[Status 01:03:57 INFO] data for H20 transferred to science data processing
[Tidy 01:03:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:03:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:03:57 INFO] resetting WatchDogTimer
[Status 01:03:57 INFO] Starting Set [AERI set: name S20, 6 scans, 0 angle, D16300 command]
[Ingest 01:03:57 INFO] Sending XML status message
[Status 01:03:57 INFO] Mirror angle: 0
[Mirror 01:03:57 INFO] rotating to position S
[Status 01:03:58 INFO] .SET file for ACQ96 ready
[Ingest 01:03:58 INFO] Starting acquisition
[Status 01:03:58 INFO] reading housekeeping
[Status 01:04:16 INFO] acquire complete
[Status 01:04:17 INFO] writing housekeeping
[Sequencer 01:04:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:04:17 INFO] incremented S scene to 20 completed views
[Sequencer 01:04:17 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:04:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:04:17 INFO] incremented to [AERI set: name T20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:04:17 INFO] S20.SIG(18)
[sigmove 01:04:17 DEBUG] transformed S20Ma.SPC -> S20MA.SPC
[sigmove 01:04:17 DEBUG] transformed S20Mb.SPC -> S20MB.SPC
[sigmove 01:04:17 DEBUG] transformed S20Mc.SPC -> S20MC.SPC
[sigmove 01:04:17 DEBUG] transformed S20Md.SPC -> S20MD.SPC
[sigmove 01:04:17 DEBUG] transformed S20Me.SPC -> S20ME.SPC
[sigmove 01:04:17 DEBUG] transformed S20Mf.SPC -> S20MF.SPC
[Status 01:04:17 INFO] data for S20 transferred to science data processing
[Tidy 01:04:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:04:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:04:17 INFO] resetting WatchDogTimer
[Status 01:04:17 INFO] Starting Set [AERI set: name T20, 6 scans, 0 angle, D16300 command]
[Ingest 01:04:17 INFO] Sending XML status message
[Status 01:04:17 INFO] Mirror angle: 0
[Mirror 01:04:17 INFO] rotating to position T
[Status 01:04:17 INFO] .SET file for ACQ96 ready
[Ingest 01:04:17 INFO] Starting acquisition
[Status 01:04:17 INFO] reading housekeeping
[Status 01:04:36 INFO] acquire complete
[Status 01:04:36 INFO] writing housekeeping
[Sequencer 01:04:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:04:36 INFO] incremented T scene to 20 completed views
[Sequencer 01:04:36 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:04:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:04:36 INFO] incremented to [AERI set: name U20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:04:36 INFO] T20.SIG(18)
[sigmove 01:04:36 DEBUG] transformed T20Ma.SPC -> T20MA.SPC
[sigmove 01:04:36 DEBUG] transformed T20Mb.SPC -> T20MB.SPC
[sigmove 01:04:36 DEBUG] transformed T20Mc.SPC -> T20MC.SPC
[sigmove 01:04:36 DEBUG] transformed T20Md.SPC -> T20MD.SPC
[sigmove 01:04:36 DEBUG] transformed T20Me.SPC -> T20ME.SPC
[sigmove 01:04:36 DEBUG] transformed T20Mf.SPC -> T20MF.SPC
[Status 01:04:36 INFO] data for T20 transferred to science data processing
[Tidy 01:04:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:04:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:04:36 INFO] resetting WatchDogTimer
[Status 01:04:36 INFO] Starting Set [AERI set: name U20, 6 scans, 0 angle, D16300 command]
[Ingest 01:04:36 INFO] Sending XML status message
[Status 01:04:36 INFO] Mirror angle: 0
[Mirror 01:04:36 INFO] rotating to position U
[Status 01:04:36 INFO] .SET file for ACQ96 ready
[Ingest 01:04:36 INFO] Starting acquisition
[Status 01:04:36 INFO] reading housekeeping
[Status 01:04:55 INFO] acquire complete
[Status 01:04:55 INFO] writing housekeeping
[Sequencer 01:04:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:04:55 INFO] incremented U scene to 20 completed views
[Sequencer 01:04:55 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:04:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:04:55 INFO] incremented to [AERI set: name V20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:04:55 INFO] U20.SIG(18)
[sigmove 01:04:55 DEBUG] transformed U20Ma.SPC -> U20MA.SPC
[sigmove 01:04:55 DEBUG] transformed U20Mb.SPC -> U20MB.SPC
[sigmove 01:04:55 DEBUG] transformed U20Mc.SPC -> U20MC.SPC
[sigmove 01:04:55 DEBUG] transformed U20Md.SPC -> U20MD.SPC
[sigmove 01:04:55 DEBUG] transformed U20Me.SPC -> U20ME.SPC
[sigmove 01:04:55 DEBUG] transformed U20Mf.SPC -> U20MF.SPC
[Status 01:04:55 INFO] data for U20 transferred to science data processing
[Tidy 01:04:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:04:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:04:55 INFO] resetting WatchDogTimer
[Status 01:04:55 INFO] Starting Set [AERI set: name V20, 6 scans, 0 angle, D16300 command]
[Ingest 01:04:55 INFO] Sending XML status message
[Status 01:04:55 INFO] Mirror angle: 0
[Mirror 01:04:55 INFO] rotating to position V
[Status 01:04:55 INFO] .SET file for ACQ96 ready
[Ingest 01:04:55 INFO] Starting acquisition
[Status 01:04:56 INFO] reading housekeeping
[Status 01:05:14 INFO] acquire complete
[Status 01:05:14 INFO] writing housekeeping
[Sequencer 01:05:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:05:14 INFO] incremented V scene to 20 completed views
[Sequencer 01:05:14 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:05:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:05:14 INFO] incremented to [AERI set: name W20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:05:14 INFO] V20.SIG(18)
[sigmove 01:05:14 DEBUG] transformed V20Ma.SPC -> V20MA.SPC
[sigmove 01:05:14 DEBUG] transformed V20Mb.SPC -> V20MB.SPC
[sigmove 01:05:14 DEBUG] transformed V20Mc.SPC -> V20MC.SPC
[sigmove 01:05:14 DEBUG] transformed V20Md.SPC -> V20MD.SPC
[sigmove 01:05:14 DEBUG] transformed V20Me.SPC -> V20ME.SPC
[sigmove 01:05:14 DEBUG] transformed V20Mf.SPC -> V20MF.SPC
[Status 01:05:14 INFO] data for V20 transferred to science data processing
[Tidy 01:05:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:05:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:05:14 INFO] resetting WatchDogTimer
[Status 01:05:14 INFO] Starting Set [AERI set: name W20, 6 scans, 0 angle, D16300 command]
[Ingest 01:05:14 INFO] Sending XML status message
[Status 01:05:14 INFO] Mirror angle: 0
[Mirror 01:05:14 INFO] rotating to position W
[Status 01:05:15 INFO] .SET file for ACQ96 ready
[Ingest 01:05:15 INFO] Starting acquisition
[Status 01:05:15 INFO] reading housekeeping
[Status 01:05:33 INFO] acquire complete
[Status 01:05:33 INFO] writing housekeeping
[Sequencer 01:05:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:05:33 INFO] incremented W scene to 20 completed views
[Sequencer 01:05:33 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:05:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:05:33 INFO] incremented to [AERI set: name X20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:05:33 INFO] W20.SIG(18)
[sigmove 01:05:33 DEBUG] transformed W20Ma.SPC -> W20MA.SPC
[sigmove 01:05:33 DEBUG] transformed W20Mb.SPC -> W20MB.SPC
[sigmove 01:05:33 DEBUG] transformed W20Mc.SPC -> W20MC.SPC
[sigmove 01:05:33 DEBUG] transformed W20Md.SPC -> W20MD.SPC
[sigmove 01:05:33 DEBUG] transformed W20Me.SPC -> W20ME.SPC
[sigmove 01:05:33 DEBUG] transformed W20Mf.SPC -> W20MF.SPC
[Status 01:05:33 INFO] data for W20 transferred to science data processing
[Tidy 01:05:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:05:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:05:33 INFO] resetting WatchDogTimer
[Status 01:05:33 INFO] Starting Set [AERI set: name X20, 6 scans, 0 angle, D16300 command]
[Ingest 01:05:33 INFO] Sending XML status message
[Status 01:05:33 INFO] Mirror angle: 0
[Mirror 01:05:33 INFO] rotating to position X
[Status 01:05:34 INFO] .SET file for ACQ96 ready
[Ingest 01:05:34 INFO] Starting acquisition
[Status 01:05:34 INFO] reading housekeeping
[Status 01:05:52 INFO] acquire complete
[Status 01:05:52 INFO] writing housekeeping
[Sequencer 01:05:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:05:52 INFO] incremented X scene to 20 completed views
[Sequencer 01:05:52 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:05:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:05:52 INFO] incremented to [AERI set: name Y20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:05:52 INFO] X20.SIG(18)
[sigmove 01:05:52 DEBUG] transformed X20Ma.SPC -> X20MA.SPC
[sigmove 01:05:52 DEBUG] transformed X20Mb.SPC -> X20MB.SPC
[sigmove 01:05:52 DEBUG] transformed X20Mc.SPC -> X20MC.SPC
[sigmove 01:05:52 DEBUG] transformed X20Md.SPC -> X20MD.SPC
[sigmove 01:05:52 DEBUG] transformed X20Me.SPC -> X20ME.SPC
[sigmove 01:05:52 DEBUG] transformed X20Mf.SPC -> X20MF.SPC
[Status 01:05:52 INFO] data for X20 transferred to science data processing
[Tidy 01:05:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:05:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:05:52 INFO] resetting WatchDogTimer
[Status 01:05:52 INFO] Starting Set [AERI set: name Y20, 6 scans, 0 angle, D16300 command]
[Ingest 01:05:52 INFO] Sending XML status message
[Status 01:05:52 INFO] Mirror angle: 0
[Mirror 01:05:52 INFO] rotating to position Y
[Status 01:05:53 INFO] .SET file for ACQ96 ready
[Ingest 01:05:53 INFO] Starting acquisition
[Status 01:05:53 INFO] reading housekeeping
[Status 01:06:11 INFO] acquire complete
[Status 01:06:11 INFO] writing housekeeping
[Sequencer 01:06:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:06:11 INFO] incremented Y scene to 20 completed views
[Sequencer 01:06:11 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:06:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:06:11 INFO] incremented to [AERI set: name Z20, 6 scans, 0 angle, D16300 command] set
[sigmove 01:06:11 INFO] Y20.SIG(18)
[sigmove 01:06:11 DEBUG] transformed Y20Ma.SPC -> Y20MA.SPC
[sigmove 01:06:11 DEBUG] transformed Y20Mb.SPC -> Y20MB.SPC
[sigmove 01:06:11 DEBUG] transformed Y20Mc.SPC -> Y20MC.SPC
[sigmove 01:06:11 DEBUG] transformed Y20Md.SPC -> Y20MD.SPC
[sigmove 01:06:11 DEBUG] transformed Y20Me.SPC -> Y20ME.SPC
[sigmove 01:06:11 DEBUG] transformed Y20Mf.SPC -> Y20MF.SPC
[Status 01:06:11 INFO] data for Y20 transferred to science data processing
[Tidy 01:06:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:06:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:06:11 INFO] resetting WatchDogTimer
[Status 01:06:11 INFO] Starting Set [AERI set: name Z20, 6 scans, 0 angle, D16300 command]
[Ingest 01:06:11 INFO] Sending XML status message
[Status 01:06:11 INFO] Mirror angle: 0
[Mirror 01:06:12 INFO] rotating to position Z
[Status 01:06:12 INFO] .SET file for ACQ96 ready
[Ingest 01:06:12 INFO] Starting acquisition
[Status 01:06:12 INFO] reading housekeeping
[Status 01:06:30 INFO] acquire complete
[Status 01:06:30 INFO] writing housekeeping
[Sequencer 01:06:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:06:30 INFO] incremented Z scene to 20 completed views
[Sequencer 01:06:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:06:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:06:30 INFO] incremented to [AERI set: name H21, 6 scans, 60 angle, D22500 command] set
[sigmove 01:06:30 INFO] Z20.SIG(18)
[sigmove 01:06:31 DEBUG] transformed Z20Ma.SPC -> Z20MA.SPC
[sigmove 01:06:31 DEBUG] transformed Z20Mb.SPC -> Z20MB.SPC
[sigmove 01:06:31 DEBUG] transformed Z20Mc.SPC -> Z20MC.SPC
[sigmove 01:06:31 DEBUG] transformed Z20Md.SPC -> Z20MD.SPC
[sigmove 01:06:31 DEBUG] transformed Z20Me.SPC -> Z20ME.SPC
[sigmove 01:06:31 DEBUG] transformed Z20Mf.SPC -> Z20MF.SPC
[Status 01:06:31 INFO] data for Z20 transferred to science data processing
[Tidy 01:06:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:06:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:06:31 INFO] resetting WatchDogTimer
[Status 01:06:31 INFO] Starting Set [AERI set: name H21, 6 scans, 60 angle, D22500 command]
[Ingest 01:06:31 INFO] Sending XML status message
[Status 01:06:31 INFO] Mirror angle: 60
[Mirror 01:06:31 INFO] rotating to position H
[Status 01:06:31 INFO] .SET file for ACQ96 ready
[Ingest 01:06:31 INFO] Starting acquisition
[Status 01:06:32 INFO] reading housekeeping
[Status 01:06:49 INFO] acquire complete
[Status 01:06:50 INFO] writing housekeeping
[Sequencer 01:06:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:06:50 INFO] incremented H scene to 21 completed views
[Sequencer 01:06:50 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:06:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:06:50 INFO] incremented to [AERI set: name A21, 6 scans, 120 angle, D28300 command] set
[sigmove 01:06:50 INFO] H21.SIG(18)
[sigmove 01:06:50 DEBUG] transformed H21Ma.SPC -> H21MA.SPC
[sigmove 01:06:50 DEBUG] transformed H21Mb.SPC -> H21MB.SPC
[sigmove 01:06:50 DEBUG] transformed H21Mc.SPC -> H21MC.SPC
[sigmove 01:06:50 DEBUG] transformed H21Md.SPC -> H21MD.SPC
[sigmove 01:06:50 DEBUG] transformed H21Me.SPC -> H21ME.SPC
[sigmove 01:06:50 DEBUG] transformed H21Mf.SPC -> H21MF.SPC
[Status 01:06:50 INFO] data for H21 transferred to science data processing
[Tidy 01:06:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:06:50 INFO] A19.FIN(19),H19.FIN(19),S19.FIN(19),T19.FIN(19),U19.FIN(19),V19.FIN(19),W19.FIN(19),X19.FIN(19),Y19.FIN(19),Z19.FIN(19),A20.FIN(19),H20.FIN(19),S20.FIN(19),T20.FIN(19),U20.FIN(19),V20.FIN(19),W20.FIN(19),X20.FIN(19),Y20.FIN(19),Z20.FIN(19)
[sigmove 01:06:50 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:06:50 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:06:50 DEBUG] done zipping
[WatchDog 01:06:50 INFO] resetting WatchDogTimer
[Status 01:06:50 INFO] Starting Set [AERI set: name A21, 6 scans, 120 angle, D28300 command]
[Ingest 01:06:50 INFO] Sending XML status message
[Status 01:06:50 INFO] Mirror angle: 120
[Mirror 01:06:51 INFO] rotating to position A
[Status 01:06:51 INFO] .SET file for ACQ96 ready
[Ingest 01:06:51 INFO] Starting acquisition
[Status 01:06:51 INFO] reading housekeeping
[Status 01:07:09 INFO] acquire complete
[Status 01:07:10 INFO] writing housekeeping
[Sequencer 01:07:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:07:10 INFO] incremented A scene to 21 completed views
[Sequencer 01:07:10 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:07:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:07:10 INFO] incremented to [AERI set: name S21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:07:10 INFO] A21.SIG(18)
[sigmove 01:07:10 DEBUG] transformed A21Ma.SPC -> A21MA.SPC
[sigmove 01:07:10 DEBUG] transformed A21Mb.SPC -> A21MB.SPC
[sigmove 01:07:10 DEBUG] transformed A21Mc.SPC -> A21MC.SPC
[sigmove 01:07:10 DEBUG] transformed A21Md.SPC -> A21MD.SPC
[sigmove 01:07:10 DEBUG] transformed A21Me.SPC -> A21ME.SPC
[sigmove 01:07:10 DEBUG] transformed A21Mf.SPC -> A21MF.SPC
[Status 01:07:10 INFO] data for A21 transferred to science data processing
[Tidy 01:07:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:07:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:07:10 INFO] resetting WatchDogTimer
[Status 01:07:10 INFO] Starting Set [AERI set: name S21, 6 scans, 0 angle, D16300 command]
[Ingest 01:07:10 INFO] Sending XML status message
[Status 01:07:10 INFO] Mirror angle: 0
[Mirror 01:07:10 INFO] rotating to position S
[Status 01:07:11 INFO] .SET file for ACQ96 ready
[Ingest 01:07:11 INFO] Starting acquisition
[Status 01:07:11 INFO] reading housekeeping
[Status 01:07:30 INFO] acquire complete
[Status 01:07:30 INFO] writing housekeeping
[Sequencer 01:07:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:07:30 INFO] incremented S scene to 21 completed views
[Sequencer 01:07:30 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:07:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:07:30 INFO] incremented to [AERI set: name T21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:07:30 INFO] S21.SIG(18)
[sigmove 01:07:30 DEBUG] transformed S21Ma.SPC -> S21MA.SPC
[sigmove 01:07:30 DEBUG] transformed S21Mb.SPC -> S21MB.SPC
[sigmove 01:07:30 DEBUG] transformed S21Mc.SPC -> S21MC.SPC
[sigmove 01:07:30 DEBUG] transformed S21Md.SPC -> S21MD.SPC
[sigmove 01:07:30 DEBUG] transformed S21Me.SPC -> S21ME.SPC
[sigmove 01:07:30 DEBUG] transformed S21Mf.SPC -> S21MF.SPC
[Status 01:07:30 INFO] data for S21 transferred to science data processing
[Tidy 01:07:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:07:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:07:30 INFO] resetting WatchDogTimer
[Status 01:07:30 INFO] Starting Set [AERI set: name T21, 6 scans, 0 angle, D16300 command]
[Ingest 01:07:30 INFO] Sending XML status message
[Status 01:07:30 INFO] Mirror angle: 0
[Mirror 01:07:30 INFO] rotating to position T
[Status 01:07:30 INFO] .SET file for ACQ96 ready
[Ingest 01:07:30 INFO] Starting acquisition
[Status 01:07:31 INFO] reading housekeeping
[Status 01:07:49 INFO] acquire complete
[Status 01:07:49 INFO] writing housekeeping
[Sequencer 01:07:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:07:49 INFO] incremented T scene to 21 completed views
[Sequencer 01:07:49 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:07:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:07:49 INFO] incremented to [AERI set: name U21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:07:49 INFO] T21.SIG(18)
[sigmove 01:07:49 DEBUG] transformed T21Ma.SPC -> T21MA.SPC
[sigmove 01:07:49 DEBUG] transformed T21Mb.SPC -> T21MB.SPC
[sigmove 01:07:49 DEBUG] transformed T21Mc.SPC -> T21MC.SPC
[sigmove 01:07:49 DEBUG] transformed T21Md.SPC -> T21MD.SPC
[sigmove 01:07:49 DEBUG] transformed T21Me.SPC -> T21ME.SPC
[sigmove 01:07:49 DEBUG] transformed T21Mf.SPC -> T21MF.SPC
[Status 01:07:49 INFO] data for T21 transferred to science data processing
[Tidy 01:07:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:07:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:07:49 INFO] resetting WatchDogTimer
[Status 01:07:49 INFO] Starting Set [AERI set: name U21, 6 scans, 0 angle, D16300 command]
[Ingest 01:07:49 INFO] Sending XML status message
[Status 01:07:49 INFO] Mirror angle: 0
[Mirror 01:07:49 INFO] rotating to position U
[Status 01:07:49 INFO] .SET file for ACQ96 ready
[Ingest 01:07:50 INFO] Starting acquisition
[Status 01:07:50 INFO] reading housekeeping
[Status 01:08:08 INFO] acquire complete
[Status 01:08:08 INFO] writing housekeeping
[Sequencer 01:08:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:08:08 INFO] incremented U scene to 21 completed views
[Sequencer 01:08:08 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:08:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:08:08 INFO] incremented to [AERI set: name V21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:08:08 INFO] U21.SIG(18)
[sigmove 01:08:08 DEBUG] transformed U21Ma.SPC -> U21MA.SPC
[sigmove 01:08:08 DEBUG] transformed U21Mb.SPC -> U21MB.SPC
[sigmove 01:08:08 DEBUG] transformed U21Mc.SPC -> U21MC.SPC
[sigmove 01:08:08 DEBUG] transformed U21Md.SPC -> U21MD.SPC
[sigmove 01:08:08 DEBUG] transformed U21Me.SPC -> U21ME.SPC
[sigmove 01:08:08 DEBUG] transformed U21Mf.SPC -> U21MF.SPC
[Status 01:08:08 INFO] data for U21 transferred to science data processing
[Tidy 01:08:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:08:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:08:08 INFO] resetting WatchDogTimer
[Status 01:08:08 INFO] Starting Set [AERI set: name V21, 6 scans, 0 angle, D16300 command]
[Ingest 01:08:08 INFO] Sending XML status message
[Status 01:08:08 INFO] Mirror angle: 0
[Mirror 01:08:08 INFO] rotating to position V
[Status 01:08:09 INFO] .SET file for ACQ96 ready
[Ingest 01:08:09 INFO] Starting acquisition
[Status 01:08:09 INFO] reading housekeeping
[Status 01:08:27 INFO] acquire complete
[Status 01:08:27 INFO] writing housekeeping
[Sequencer 01:08:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:08:27 INFO] incremented V scene to 21 completed views
[Sequencer 01:08:27 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:08:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:08:27 INFO] incremented to [AERI set: name W21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:08:27 INFO] V21.SIG(18)
[sigmove 01:08:27 DEBUG] transformed V21Ma.SPC -> V21MA.SPC
[sigmove 01:08:27 DEBUG] transformed V21Mb.SPC -> V21MB.SPC
[sigmove 01:08:27 DEBUG] transformed V21Mc.SPC -> V21MC.SPC
[sigmove 01:08:27 DEBUG] transformed V21Md.SPC -> V21MD.SPC
[sigmove 01:08:27 DEBUG] transformed V21Me.SPC -> V21ME.SPC
[sigmove 01:08:27 DEBUG] transformed V21Mf.SPC -> V21MF.SPC
[Status 01:08:27 INFO] data for V21 transferred to science data processing
[Tidy 01:08:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:08:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:08:27 INFO] resetting WatchDogTimer
[Status 01:08:27 INFO] Starting Set [AERI set: name W21, 6 scans, 0 angle, D16300 command]
[Ingest 01:08:27 INFO] Sending XML status message
[Status 01:08:27 INFO] Mirror angle: 0
[Mirror 01:08:27 INFO] rotating to position W
[Status 01:08:28 INFO] .SET file for ACQ96 ready
[Ingest 01:08:28 INFO] Starting acquisition
[Status 01:08:28 INFO] reading housekeeping
[Status 01:08:46 INFO] acquire complete
[Status 01:08:46 INFO] writing housekeeping
[Sequencer 01:08:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:08:46 INFO] incremented W scene to 21 completed views
[Sequencer 01:08:46 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:08:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:08:46 INFO] incremented to [AERI set: name X21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:08:46 INFO] W21.SIG(18)
[sigmove 01:08:46 DEBUG] transformed W21Ma.SPC -> W21MA.SPC
[sigmove 01:08:46 DEBUG] transformed W21Mb.SPC -> W21MB.SPC
[sigmove 01:08:46 DEBUG] transformed W21Mc.SPC -> W21MC.SPC
[sigmove 01:08:46 DEBUG] transformed W21Md.SPC -> W21MD.SPC
[sigmove 01:08:46 DEBUG] transformed W21Me.SPC -> W21ME.SPC
[sigmove 01:08:46 DEBUG] transformed W21Mf.SPC -> W21MF.SPC
[Status 01:08:46 INFO] data for W21 transferred to science data processing
[Tidy 01:08:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:08:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:08:46 INFO] resetting WatchDogTimer
[Status 01:08:46 INFO] Starting Set [AERI set: name X21, 6 scans, 0 angle, D16300 command]
[Ingest 01:08:46 INFO] Sending XML status message
[Status 01:08:46 INFO] Mirror angle: 0
[Mirror 01:08:47 INFO] rotating to position X
[Status 01:08:47 INFO] .SET file for ACQ96 ready
[Ingest 01:08:47 INFO] Starting acquisition
[Status 01:08:47 INFO] reading housekeeping
[Status 01:09:05 INFO] acquire complete
[Status 01:09:05 INFO] writing housekeeping
[Sequencer 01:09:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:09:05 INFO] incremented X scene to 21 completed views
[Sequencer 01:09:05 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:09:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:09:05 INFO] incremented to [AERI set: name Y21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:09:05 INFO] X21.SIG(18)
[sigmove 01:09:05 DEBUG] transformed X21Ma.SPC -> X21MA.SPC
[sigmove 01:09:05 DEBUG] transformed X21Mb.SPC -> X21MB.SPC
[sigmove 01:09:05 DEBUG] transformed X21Mc.SPC -> X21MC.SPC
[sigmove 01:09:05 DEBUG] transformed X21Md.SPC -> X21MD.SPC
[sigmove 01:09:05 DEBUG] transformed X21Me.SPC -> X21ME.SPC
[sigmove 01:09:05 DEBUG] transformed X21Mf.SPC -> X21MF.SPC
[Status 01:09:05 INFO] data for X21 transferred to science data processing
[Tidy 01:09:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:09:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:09:05 INFO] resetting WatchDogTimer
[Status 01:09:06 INFO] Starting Set [AERI set: name Y21, 6 scans, 0 angle, D16300 command]
[Ingest 01:09:06 INFO] Sending XML status message
[Status 01:09:06 INFO] Mirror angle: 0
[Mirror 01:09:06 INFO] rotating to position Y
[Status 01:09:06 INFO] .SET file for ACQ96 ready
[Ingest 01:09:06 INFO] Starting acquisition
[Status 01:09:06 INFO] reading housekeeping
[Status 01:09:24 INFO] acquire complete
[Status 01:09:25 INFO] writing housekeeping
[Sequencer 01:09:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:09:25 INFO] incremented Y scene to 21 completed views
[Sequencer 01:09:25 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:09:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:09:25 INFO] incremented to [AERI set: name Z21, 6 scans, 0 angle, D16300 command] set
[sigmove 01:09:25 INFO] Y21.SIG(18)
[sigmove 01:09:25 DEBUG] transformed Y21Ma.SPC -> Y21MA.SPC
[sigmove 01:09:25 DEBUG] transformed Y21Mb.SPC -> Y21MB.SPC
[sigmove 01:09:25 DEBUG] transformed Y21Mc.SPC -> Y21MC.SPC
[sigmove 01:09:25 DEBUG] transformed Y21Md.SPC -> Y21MD.SPC
[sigmove 01:09:25 DEBUG] transformed Y21Me.SPC -> Y21ME.SPC
[sigmove 01:09:25 DEBUG] transformed Y21Mf.SPC -> Y21MF.SPC
[Status 01:09:25 INFO] data for Y21 transferred to science data processing
[Tidy 01:09:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:09:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:09:25 INFO] resetting WatchDogTimer
[Status 01:09:25 INFO] Starting Set [AERI set: name Z21, 6 scans, 0 angle, D16300 command]
[Ingest 01:09:25 INFO] Sending XML status message
[Status 01:09:25 INFO] Mirror angle: 0
[Mirror 01:09:25 INFO] rotating to position Z
[Status 01:09:25 INFO] .SET file for ACQ96 ready
[Ingest 01:09:25 INFO] Starting acquisition
[Status 01:09:25 INFO] reading housekeeping
[Status 01:09:43 INFO] acquire complete
[Status 01:09:44 INFO] writing housekeeping
[Sequencer 01:09:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:09:44 INFO] incremented Z scene to 21 completed views
[Sequencer 01:09:44 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:09:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:09:44 INFO] incremented to [AERI set: name A22, 6 scans, 120 angle, D28300 command] set
[sigmove 01:09:44 INFO] Z21.SIG(18)
[sigmove 01:09:44 DEBUG] transformed Z21Ma.SPC -> Z21MA.SPC
[sigmove 01:09:44 DEBUG] transformed Z21Mb.SPC -> Z21MB.SPC
[sigmove 01:09:44 DEBUG] transformed Z21Mc.SPC -> Z21MC.SPC
[sigmove 01:09:44 DEBUG] transformed Z21Md.SPC -> Z21MD.SPC
[sigmove 01:09:44 DEBUG] transformed Z21Me.SPC -> Z21ME.SPC
[sigmove 01:09:44 DEBUG] transformed Z21Mf.SPC -> Z21MF.SPC
[Status 01:09:44 INFO] data for Z21 transferred to science data processing
[Tidy 01:09:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:09:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:09:44 INFO] resetting WatchDogTimer
[Status 01:09:44 INFO] Starting Set [AERI set: name A22, 6 scans, 120 angle, D28300 command]
[Ingest 01:09:44 INFO] Sending XML status message
[Status 01:09:44 INFO] Mirror angle: 120
[Mirror 01:09:44 INFO] rotating to position A
[Status 01:09:45 INFO] .SET file for ACQ96 ready
[Ingest 01:09:45 INFO] Starting acquisition
[Status 01:09:45 INFO] reading housekeeping
[Status 01:10:04 INFO] acquire complete
[Status 01:10:04 INFO] writing housekeeping
[Sequencer 01:10:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:10:04 INFO] incremented A scene to 22 completed views
[Sequencer 01:10:04 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:10:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:10:04 INFO] incremented to [AERI set: name H22, 6 scans, 60 angle, D22500 command] set
[sigmove 01:10:04 INFO] A22.SIG(18)
[sigmove 01:10:04 DEBUG] transformed A22Ma.SPC -> A22MA.SPC
[sigmove 01:10:04 DEBUG] transformed A22Mb.SPC -> A22MB.SPC
[sigmove 01:10:04 DEBUG] transformed A22Mc.SPC -> A22MC.SPC
[sigmove 01:10:04 DEBUG] transformed A22Md.SPC -> A22MD.SPC
[sigmove 01:10:04 DEBUG] transformed A22Me.SPC -> A22ME.SPC
[sigmove 01:10:04 DEBUG] transformed A22Mf.SPC -> A22MF.SPC
[Status 01:10:04 INFO] data for A22 transferred to science data processing
[Tidy 01:10:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:10:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:10:04 INFO] resetting WatchDogTimer
[Status 01:10:04 INFO] Starting Set [AERI set: name H22, 6 scans, 60 angle, D22500 command]
[Ingest 01:10:04 INFO] Sending XML status message
[Status 01:10:04 INFO] Mirror angle: 60
[Mirror 01:10:04 INFO] rotating to position H
[Status 01:10:05 INFO] .SET file for ACQ96 ready
[Ingest 01:10:05 INFO] Starting acquisition
[Status 01:10:05 INFO] reading housekeeping
[Status 01:10:23 INFO] acquire complete
[Status 01:10:23 INFO] writing housekeeping
[Sequencer 01:10:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:10:23 INFO] incremented H scene to 22 completed views
[Sequencer 01:10:23 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:10:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:10:23 INFO] incremented to [AERI set: name S22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:10:23 INFO] H22.SIG(18)
[sigmove 01:10:23 DEBUG] transformed H22Ma.SPC -> H22MA.SPC
[sigmove 01:10:23 DEBUG] transformed H22Mb.SPC -> H22MB.SPC
[sigmove 01:10:23 DEBUG] transformed H22Mc.SPC -> H22MC.SPC
[sigmove 01:10:23 DEBUG] transformed H22Md.SPC -> H22MD.SPC
[sigmove 01:10:23 DEBUG] transformed H22Me.SPC -> H22ME.SPC
[sigmove 01:10:23 DEBUG] transformed H22Mf.SPC -> H22MF.SPC
[Status 01:10:23 INFO] data for H22 transferred to science data processing
[Tidy 01:10:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:10:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:10:23 INFO] resetting WatchDogTimer
[Status 01:10:23 INFO] Starting Set [AERI set: name S22, 6 scans, 0 angle, D16300 command]
[Ingest 01:10:23 INFO] Sending XML status message
[Status 01:10:23 INFO] Mirror angle: 0
[Mirror 01:10:23 INFO] rotating to position S
[Status 01:10:24 INFO] .SET file for ACQ96 ready
[Ingest 01:10:24 INFO] Starting acquisition
[Status 01:10:24 INFO] reading housekeeping
[Status 01:10:42 INFO] acquire complete
[Status 01:10:42 INFO] writing housekeeping
[Sequencer 01:10:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:10:42 INFO] incremented S scene to 22 completed views
[Sequencer 01:10:42 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:10:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:10:42 INFO] incremented to [AERI set: name T22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:10:42 INFO] S22.SIG(18)
[sigmove 01:10:42 DEBUG] transformed S22Ma.SPC -> S22MA.SPC
[sigmove 01:10:42 DEBUG] transformed S22Mb.SPC -> S22MB.SPC
[sigmove 01:10:42 DEBUG] transformed S22Mc.SPC -> S22MC.SPC
[sigmove 01:10:42 DEBUG] transformed S22Md.SPC -> S22MD.SPC
[sigmove 01:10:42 DEBUG] transformed S22Me.SPC -> S22ME.SPC
[sigmove 01:10:42 DEBUG] transformed S22Mf.SPC -> S22MF.SPC
[Status 01:10:42 INFO] data for S22 transferred to science data processing
[Tidy 01:10:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:10:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:10:42 INFO] resetting WatchDogTimer
[Status 01:10:42 INFO] Starting Set [AERI set: name T22, 6 scans, 0 angle, D16300 command]
[Ingest 01:10:42 INFO] Sending XML status message
[Status 01:10:42 INFO] Mirror angle: 0
[Mirror 01:10:42 INFO] rotating to position T
[Status 01:10:42 INFO] .SET file for ACQ96 ready
[Ingest 01:10:42 INFO] Starting acquisition
[Status 01:10:42 INFO] reading housekeeping
[Status 01:11:01 INFO] acquire complete
[Status 01:11:01 INFO] writing housekeeping
[Sequencer 01:11:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:11:01 INFO] incremented T scene to 22 completed views
[Sequencer 01:11:01 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:11:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:11:01 INFO] incremented to [AERI set: name U22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:11:01 INFO] T22.SIG(18)
[sigmove 01:11:01 DEBUG] transformed T22Ma.SPC -> T22MA.SPC
[sigmove 01:11:01 DEBUG] transformed T22Mb.SPC -> T22MB.SPC
[sigmove 01:11:01 DEBUG] transformed T22Mc.SPC -> T22MC.SPC
[sigmove 01:11:01 DEBUG] transformed T22Md.SPC -> T22MD.SPC
[sigmove 01:11:01 DEBUG] transformed T22Me.SPC -> T22ME.SPC
[sigmove 01:11:01 DEBUG] transformed T22Mf.SPC -> T22MF.SPC
[Status 01:11:01 INFO] data for T22 transferred to science data processing
[Tidy 01:11:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:11:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:11:01 INFO] resetting WatchDogTimer
[Status 01:11:01 INFO] Starting Set [AERI set: name U22, 6 scans, 0 angle, D16300 command]
[Ingest 01:11:01 INFO] Sending XML status message
[Status 01:11:01 INFO] Mirror angle: 0
[Mirror 01:11:01 INFO] rotating to position U
[Status 01:11:01 INFO] .SET file for ACQ96 ready
[Ingest 01:11:02 INFO] Starting acquisition
[Status 01:11:02 INFO] reading housekeeping
[Status 01:11:20 INFO] acquire complete
[Status 01:11:20 INFO] writing housekeeping
[Sequencer 01:11:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:11:20 INFO] incremented U scene to 22 completed views
[Sequencer 01:11:20 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:11:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:11:20 INFO] incremented to [AERI set: name V22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:11:20 INFO] U22.SIG(18)
[sigmove 01:11:20 DEBUG] transformed U22Ma.SPC -> U22MA.SPC
[sigmove 01:11:20 DEBUG] transformed U22Mb.SPC -> U22MB.SPC
[sigmove 01:11:20 DEBUG] transformed U22Mc.SPC -> U22MC.SPC
[sigmove 01:11:20 DEBUG] transformed U22Md.SPC -> U22MD.SPC
[sigmove 01:11:20 DEBUG] transformed U22Me.SPC -> U22ME.SPC
[sigmove 01:11:20 DEBUG] transformed U22Mf.SPC -> U22MF.SPC
[Status 01:11:20 INFO] data for U22 transferred to science data processing
[Tidy 01:11:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:11:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:11:20 INFO] resetting WatchDogTimer
[Status 01:11:20 INFO] Starting Set [AERI set: name V22, 6 scans, 0 angle, D16300 command]
[Ingest 01:11:20 INFO] Sending XML status message
[Status 01:11:20 INFO] Mirror angle: 0
[Mirror 01:11:20 INFO] rotating to position V
[Status 01:11:21 INFO] .SET file for ACQ96 ready
[Ingest 01:11:21 INFO] Starting acquisition
[Status 01:11:21 INFO] reading housekeeping
[Status 01:11:39 INFO] acquire complete
[Status 01:11:39 INFO] writing housekeeping
[Sequencer 01:11:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:11:39 INFO] incremented V scene to 22 completed views
[Sequencer 01:11:39 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:11:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:11:39 INFO] incremented to [AERI set: name W22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:11:39 INFO] V22.SIG(18)
[sigmove 01:11:39 DEBUG] transformed V22Ma.SPC -> V22MA.SPC
[sigmove 01:11:39 DEBUG] transformed V22Mb.SPC -> V22MB.SPC
[sigmove 01:11:39 DEBUG] transformed V22Mc.SPC -> V22MC.SPC
[sigmove 01:11:39 DEBUG] transformed V22Md.SPC -> V22MD.SPC
[sigmove 01:11:39 DEBUG] transformed V22Me.SPC -> V22ME.SPC
[sigmove 01:11:39 DEBUG] transformed V22Mf.SPC -> V22MF.SPC
[Status 01:11:39 INFO] data for V22 transferred to science data processing
[Tidy 01:11:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:11:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:11:39 INFO] resetting WatchDogTimer
[Status 01:11:39 INFO] Starting Set [AERI set: name W22, 6 scans, 0 angle, D16300 command]
[Ingest 01:11:39 INFO] Sending XML status message
[Status 01:11:39 INFO] Mirror angle: 0
[Mirror 01:11:39 INFO] rotating to position W
[Status 01:11:40 INFO] .SET file for ACQ96 ready
[Ingest 01:11:40 INFO] Starting acquisition
[Status 01:11:40 INFO] reading housekeeping
[Status 01:11:58 INFO] acquire complete
[Status 01:11:58 INFO] writing housekeeping
[Sequencer 01:11:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:11:58 INFO] incremented W scene to 22 completed views
[Sequencer 01:11:58 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:11:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:11:58 INFO] incremented to [AERI set: name X22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:11:58 INFO] W22.SIG(18)
[sigmove 01:11:58 DEBUG] transformed W22Ma.SPC -> W22MA.SPC
[sigmove 01:11:58 DEBUG] transformed W22Mb.SPC -> W22MB.SPC
[sigmove 01:11:58 DEBUG] transformed W22Mc.SPC -> W22MC.SPC
[sigmove 01:11:58 DEBUG] transformed W22Md.SPC -> W22MD.SPC
[sigmove 01:11:58 DEBUG] transformed W22Me.SPC -> W22ME.SPC
[sigmove 01:11:58 DEBUG] transformed W22Mf.SPC -> W22MF.SPC
[Status 01:11:58 INFO] data for W22 transferred to science data processing
[Tidy 01:11:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:11:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:11:58 INFO] resetting WatchDogTimer
[Status 01:11:58 INFO] Starting Set [AERI set: name X22, 6 scans, 0 angle, D16300 command]
[Ingest 01:11:58 INFO] Sending XML status message
[Status 01:11:58 INFO] Mirror angle: 0
[Mirror 01:11:59 INFO] rotating to position X
[Status 01:11:59 INFO] .SET file for ACQ96 ready
[Ingest 01:11:59 INFO] Starting acquisition
[Status 01:11:59 INFO] reading housekeeping
[Status 01:12:17 INFO] acquire complete
[Status 01:12:17 INFO] writing housekeeping
[Sequencer 01:12:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:12:17 INFO] incremented X scene to 22 completed views
[Sequencer 01:12:17 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:12:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:12:17 INFO] incremented to [AERI set: name Y22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:12:17 INFO] X22.SIG(18)
[sigmove 01:12:17 DEBUG] transformed X22Ma.SPC -> X22MA.SPC
[sigmove 01:12:17 DEBUG] transformed X22Mb.SPC -> X22MB.SPC
[sigmove 01:12:17 DEBUG] transformed X22Mc.SPC -> X22MC.SPC
[sigmove 01:12:17 DEBUG] transformed X22Md.SPC -> X22MD.SPC
[sigmove 01:12:17 DEBUG] transformed X22Me.SPC -> X22ME.SPC
[sigmove 01:12:17 DEBUG] transformed X22Mf.SPC -> X22MF.SPC
[Status 01:12:17 INFO] data for X22 transferred to science data processing
[Tidy 01:12:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:12:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:12:17 INFO] resetting WatchDogTimer
[Status 01:12:18 INFO] Starting Set [AERI set: name Y22, 6 scans, 0 angle, D16300 command]
[Ingest 01:12:18 INFO] Sending XML status message
[Status 01:12:18 INFO] Mirror angle: 0
[Mirror 01:12:18 INFO] rotating to position Y
[Status 01:12:18 INFO] .SET file for ACQ96 ready
[Ingest 01:12:18 INFO] Starting acquisition
[Status 01:12:18 INFO] reading housekeeping
[Status 01:12:36 INFO] acquire complete
[Status 01:12:36 INFO] writing housekeeping
[Sequencer 01:12:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:12:36 INFO] incremented Y scene to 22 completed views
[Sequencer 01:12:36 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:12:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:12:36 INFO] incremented to [AERI set: name Z22, 6 scans, 0 angle, D16300 command] set
[sigmove 01:12:36 INFO] Y22.SIG(18)
[sigmove 01:12:37 DEBUG] transformed Y22Ma.SPC -> Y22MA.SPC
[sigmove 01:12:37 DEBUG] transformed Y22Mb.SPC -> Y22MB.SPC
[sigmove 01:12:37 DEBUG] transformed Y22Mc.SPC -> Y22MC.SPC
[sigmove 01:12:37 DEBUG] transformed Y22Md.SPC -> Y22MD.SPC
[sigmove 01:12:37 DEBUG] transformed Y22Me.SPC -> Y22ME.SPC
[sigmove 01:12:37 DEBUG] transformed Y22Mf.SPC -> Y22MF.SPC
[Status 01:12:37 INFO] data for Y22 transferred to science data processing
[Tidy 01:12:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:12:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:12:37 INFO] resetting WatchDogTimer
[Status 01:12:37 INFO] Starting Set [AERI set: name Z22, 6 scans, 0 angle, D16300 command]
[Ingest 01:12:37 INFO] Sending XML status message
[Status 01:12:37 INFO] Mirror angle: 0
[Mirror 01:12:37 INFO] rotating to position Z
[Status 01:12:37 INFO] .SET file for ACQ96 ready
[Ingest 01:12:37 INFO] Starting acquisition
[Status 01:12:37 INFO] reading housekeeping
[Status 01:12:55 INFO] acquire complete
[Status 01:12:56 INFO] writing housekeeping
[Sequencer 01:12:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:12:56 INFO] incremented Z scene to 22 completed views
[Sequencer 01:12:56 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:12:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:12:56 INFO] incremented to [AERI set: name H23, 6 scans, 60 angle, D22500 command] set
[sigmove 01:12:56 INFO] Z22.SIG(18)
[sigmove 01:12:56 DEBUG] transformed Z22Ma.SPC -> Z22MA.SPC
[sigmove 01:12:56 DEBUG] transformed Z22Mb.SPC -> Z22MB.SPC
[sigmove 01:12:56 DEBUG] transformed Z22Mc.SPC -> Z22MC.SPC
[sigmove 01:12:56 DEBUG] transformed Z22Md.SPC -> Z22MD.SPC
[sigmove 01:12:56 DEBUG] transformed Z22Me.SPC -> Z22ME.SPC
[sigmove 01:12:56 DEBUG] transformed Z22Mf.SPC -> Z22MF.SPC
[Status 01:12:56 INFO] data for Z22 transferred to science data processing
[Tidy 01:12:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:12:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:12:56 INFO] resetting WatchDogTimer
[Status 01:12:56 INFO] Starting Set [AERI set: name H23, 6 scans, 60 angle, D22500 command]
[Ingest 01:12:56 INFO] Sending XML status message
[Status 01:12:56 INFO] Mirror angle: 60
[Mirror 01:12:56 INFO] rotating to position H
[Status 01:12:56 INFO] .SET file for ACQ96 ready
[Ingest 01:12:57 INFO] Starting acquisition
[Status 01:12:57 INFO] reading housekeeping
[Status 01:13:14 INFO] acquire complete
[Status 01:13:15 INFO] writing housekeeping
[Sequencer 01:13:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:13:15 INFO] incremented H scene to 23 completed views
[Sequencer 01:13:15 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:13:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:13:15 INFO] incremented to [AERI set: name A23, 6 scans, 120 angle, D28300 command] set
[sigmove 01:13:15 INFO] H23.SIG(18)
[sigmove 01:13:15 DEBUG] transformed H23Ma.SPC -> H23MA.SPC
[sigmove 01:13:15 DEBUG] transformed H23Mb.SPC -> H23MB.SPC
[sigmove 01:13:15 DEBUG] transformed H23Mc.SPC -> H23MC.SPC
[sigmove 01:13:15 DEBUG] transformed H23Md.SPC -> H23MD.SPC
[sigmove 01:13:15 DEBUG] transformed H23Me.SPC -> H23ME.SPC
[sigmove 01:13:15 DEBUG] transformed H23Mf.SPC -> H23MF.SPC
[Status 01:13:15 INFO] data for H23 transferred to science data processing
[Tidy 01:13:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:13:15 INFO] A21.FIN(19),H21.FIN(19),S21.FIN(19),T21.FIN(19),U21.FIN(19),V21.FIN(19),W21.FIN(19),X21.FIN(19),Y21.FIN(19),Z21.FIN(19),A22.FIN(19),H22.FIN(19),S22.FIN(19),T22.FIN(19),U22.FIN(19),V22.FIN(19),W22.FIN(19),X22.FIN(19),Y22.FIN(19),Z22.FIN(19)
[sigmove 01:13:15 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:13:15 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:13:15 DEBUG] done zipping
[WatchDog 01:13:15 INFO] resetting WatchDogTimer
[Status 01:13:16 INFO] Starting Set [AERI set: name A23, 6 scans, 120 angle, D28300 command]
[Ingest 01:13:16 INFO] Sending XML status message
[Status 01:13:16 INFO] Mirror angle: 120
[Mirror 01:13:16 INFO] rotating to position A
[Status 01:13:16 INFO] .SET file for ACQ96 ready
[Ingest 01:13:16 INFO] Starting acquisition
[Status 01:13:16 INFO] reading housekeeping
[Status 01:13:35 INFO] acquire complete
[Status 01:13:35 INFO] writing housekeeping
[Sequencer 01:13:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:13:35 INFO] incremented A scene to 23 completed views
[Sequencer 01:13:35 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:13:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:13:35 INFO] incremented to [AERI set: name S23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:13:35 INFO] A23.SIG(18)
[sigmove 01:13:35 DEBUG] transformed A23Ma.SPC -> A23MA.SPC
[sigmove 01:13:35 DEBUG] transformed A23Mb.SPC -> A23MB.SPC
[sigmove 01:13:35 DEBUG] transformed A23Mc.SPC -> A23MC.SPC
[sigmove 01:13:35 DEBUG] transformed A23Md.SPC -> A23MD.SPC
[sigmove 01:13:35 DEBUG] transformed A23Me.SPC -> A23ME.SPC
[sigmove 01:13:35 DEBUG] transformed A23Mf.SPC -> A23MF.SPC
[Status 01:13:35 INFO] data for A23 transferred to science data processing
[Tidy 01:13:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:13:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:13:35 INFO] resetting WatchDogTimer
[Status 01:13:35 INFO] Starting Set [AERI set: name S23, 6 scans, 0 angle, D16300 command]
[Ingest 01:13:35 INFO] Sending XML status message
[Status 01:13:35 INFO] Mirror angle: 0
[Mirror 01:13:35 INFO] rotating to position S
[Status 01:13:36 INFO] .SET file for ACQ96 ready
[Ingest 01:13:36 INFO] Starting acquisition
[Status 01:13:36 INFO] reading housekeeping
[Status 01:13:55 INFO] acquire complete
[Status 01:13:55 INFO] writing housekeeping
[Sequencer 01:13:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:13:55 INFO] incremented S scene to 23 completed views
[Sequencer 01:13:55 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:13:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:13:55 INFO] incremented to [AERI set: name T23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:13:55 INFO] S23.SIG(18)
[sigmove 01:13:55 DEBUG] transformed S23Ma.SPC -> S23MA.SPC
[sigmove 01:13:55 DEBUG] transformed S23Mb.SPC -> S23MB.SPC
[sigmove 01:13:55 DEBUG] transformed S23Mc.SPC -> S23MC.SPC
[sigmove 01:13:55 DEBUG] transformed S23Md.SPC -> S23MD.SPC
[sigmove 01:13:55 DEBUG] transformed S23Me.SPC -> S23ME.SPC
[sigmove 01:13:55 DEBUG] transformed S23Mf.SPC -> S23MF.SPC
[Status 01:13:55 INFO] data for S23 transferred to science data processing
[Tidy 01:13:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:13:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:13:55 INFO] resetting WatchDogTimer
[Status 01:13:55 INFO] Starting Set [AERI set: name T23, 6 scans, 0 angle, D16300 command]
[Ingest 01:13:55 INFO] Sending XML status message
[Status 01:13:55 INFO] Mirror angle: 0
[Mirror 01:13:55 INFO] rotating to position T
[Status 01:13:55 INFO] .SET file for ACQ96 ready
[Ingest 01:13:56 INFO] Starting acquisition
[Status 01:13:56 INFO] reading housekeeping
[Status 01:14:14 INFO] acquire complete
[Status 01:14:14 INFO] writing housekeeping
[Sequencer 01:14:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:14:14 INFO] incremented T scene to 23 completed views
[Sequencer 01:14:14 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:14:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:14:14 INFO] incremented to [AERI set: name U23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:14:14 INFO] T23.SIG(18)
[sigmove 01:14:14 DEBUG] transformed T23Ma.SPC -> T23MA.SPC
[sigmove 01:14:14 DEBUG] transformed T23Mb.SPC -> T23MB.SPC
[sigmove 01:14:14 DEBUG] transformed T23Mc.SPC -> T23MC.SPC
[sigmove 01:14:14 DEBUG] transformed T23Md.SPC -> T23MD.SPC
[sigmove 01:14:14 DEBUG] transformed T23Me.SPC -> T23ME.SPC
[sigmove 01:14:14 DEBUG] transformed T23Mf.SPC -> T23MF.SPC
[Status 01:14:14 INFO] data for T23 transferred to science data processing
[Tidy 01:14:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:14:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:14:14 INFO] resetting WatchDogTimer
[Status 01:14:14 INFO] Starting Set [AERI set: name U23, 6 scans, 0 angle, D16300 command]
[Ingest 01:14:14 INFO] Sending XML status message
[Status 01:14:14 INFO] Mirror angle: 0
[Mirror 01:14:14 INFO] rotating to position U
[Status 01:14:15 INFO] .SET file for ACQ96 ready
[Ingest 01:14:15 INFO] Starting acquisition
[Status 01:14:15 INFO] reading housekeeping
[Status 01:14:33 INFO] acquire complete
[Status 01:14:33 INFO] writing housekeeping
[Sequencer 01:14:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:14:33 INFO] incremented U scene to 23 completed views
[Sequencer 01:14:33 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:14:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:14:33 INFO] incremented to [AERI set: name V23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:14:33 INFO] U23.SIG(18)
[sigmove 01:14:33 DEBUG] transformed U23Ma.SPC -> U23MA.SPC
[sigmove 01:14:33 DEBUG] transformed U23Mb.SPC -> U23MB.SPC
[sigmove 01:14:33 DEBUG] transformed U23Mc.SPC -> U23MC.SPC
[sigmove 01:14:33 DEBUG] transformed U23Md.SPC -> U23MD.SPC
[sigmove 01:14:33 DEBUG] transformed U23Me.SPC -> U23ME.SPC
[sigmove 01:14:33 DEBUG] transformed U23Mf.SPC -> U23MF.SPC
[Status 01:14:33 INFO] data for U23 transferred to science data processing
[Tidy 01:14:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:14:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:14:33 INFO] resetting WatchDogTimer
[Status 01:14:33 INFO] Starting Set [AERI set: name V23, 6 scans, 0 angle, D16300 command]
[Ingest 01:14:33 INFO] Sending XML status message
[Status 01:14:33 INFO] Mirror angle: 0
[Mirror 01:14:33 INFO] rotating to position V
[Status 01:14:34 INFO] .SET file for ACQ96 ready
[Ingest 01:14:34 INFO] Starting acquisition
[Status 01:14:34 INFO] reading housekeeping
[Status 01:14:52 INFO] acquire complete
[Status 01:14:52 INFO] writing housekeeping
[Sequencer 01:14:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:14:52 INFO] incremented V scene to 23 completed views
[Sequencer 01:14:52 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:14:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:14:52 INFO] incremented to [AERI set: name W23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:14:52 INFO] V23.SIG(18)
[sigmove 01:14:52 DEBUG] transformed V23Ma.SPC -> V23MA.SPC
[sigmove 01:14:52 DEBUG] transformed V23Mb.SPC -> V23MB.SPC
[sigmove 01:14:52 DEBUG] transformed V23Mc.SPC -> V23MC.SPC
[sigmove 01:14:52 DEBUG] transformed V23Md.SPC -> V23MD.SPC
[sigmove 01:14:52 DEBUG] transformed V23Me.SPC -> V23ME.SPC
[sigmove 01:14:52 DEBUG] transformed V23Mf.SPC -> V23MF.SPC
[Status 01:14:52 INFO] data for V23 transferred to science data processing
[Tidy 01:14:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:14:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:14:52 INFO] resetting WatchDogTimer
[Status 01:14:52 INFO] Starting Set [AERI set: name W23, 6 scans, 0 angle, D16300 command]
[Ingest 01:14:52 INFO] Sending XML status message
[Status 01:14:52 INFO] Mirror angle: 0
[Mirror 01:14:53 INFO] rotating to position W
[Status 01:14:53 INFO] .SET file for ACQ96 ready
[Ingest 01:14:53 INFO] Starting acquisition
[Status 01:14:53 INFO] reading housekeeping
[Status 01:15:11 INFO] acquire complete
[Status 01:15:11 INFO] writing housekeeping
[Sequencer 01:15:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:15:11 INFO] incremented W scene to 23 completed views
[Sequencer 01:15:11 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:15:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:15:11 INFO] incremented to [AERI set: name X23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:15:11 INFO] W23.SIG(18)
[sigmove 01:15:11 DEBUG] transformed W23Ma.SPC -> W23MA.SPC
[sigmove 01:15:11 DEBUG] transformed W23Mb.SPC -> W23MB.SPC
[sigmove 01:15:11 DEBUG] transformed W23Mc.SPC -> W23MC.SPC
[sigmove 01:15:11 DEBUG] transformed W23Md.SPC -> W23MD.SPC
[sigmove 01:15:11 DEBUG] transformed W23Me.SPC -> W23ME.SPC
[sigmove 01:15:11 DEBUG] transformed W23Mf.SPC -> W23MF.SPC
[Status 01:15:11 INFO] data for W23 transferred to science data processing
[Tidy 01:15:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:15:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:15:11 INFO] resetting WatchDogTimer
[Status 01:15:12 INFO] Starting Set [AERI set: name X23, 6 scans, 0 angle, D16300 command]
[Ingest 01:15:12 INFO] Sending XML status message
[Status 01:15:12 INFO] Mirror angle: 0
[Mirror 01:15:12 INFO] rotating to position X
[Status 01:15:12 INFO] .SET file for ACQ96 ready
[Ingest 01:15:12 INFO] Starting acquisition
[Status 01:15:12 INFO] reading housekeeping
[Status 01:15:30 INFO] acquire complete
[Status 01:15:31 INFO] writing housekeeping
[Sequencer 01:15:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:15:31 INFO] incremented X scene to 23 completed views
[Sequencer 01:15:31 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:15:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:15:31 INFO] incremented to [AERI set: name Y23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:15:31 INFO] X23.SIG(18)
[sigmove 01:15:31 DEBUG] transformed X23Ma.SPC -> X23MA.SPC
[sigmove 01:15:31 DEBUG] transformed X23Mb.SPC -> X23MB.SPC
[sigmove 01:15:31 DEBUG] transformed X23Mc.SPC -> X23MC.SPC
[sigmove 01:15:31 DEBUG] transformed X23Md.SPC -> X23MD.SPC
[sigmove 01:15:31 DEBUG] transformed X23Me.SPC -> X23ME.SPC
[sigmove 01:15:31 DEBUG] transformed X23Mf.SPC -> X23MF.SPC
[Status 01:15:31 INFO] data for X23 transferred to science data processing
[Tidy 01:15:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:15:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:15:31 INFO] resetting WatchDogTimer
[Status 01:15:31 INFO] Starting Set [AERI set: name Y23, 6 scans, 0 angle, D16300 command]
[Ingest 01:15:31 INFO] Sending XML status message
[Status 01:15:31 INFO] Mirror angle: 0
[Mirror 01:15:31 INFO] rotating to position Y
[Status 01:15:31 INFO] .SET file for ACQ96 ready
[Ingest 01:15:31 INFO] Starting acquisition
[Status 01:15:31 INFO] reading housekeeping
[Status 01:15:49 INFO] acquire complete
[Status 01:15:50 INFO] writing housekeeping
[Sequencer 01:15:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:15:50 INFO] incremented Y scene to 23 completed views
[Sequencer 01:15:50 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:15:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:15:50 INFO] incremented to [AERI set: name Z23, 6 scans, 0 angle, D16300 command] set
[sigmove 01:15:50 INFO] Y23.SIG(18)
[sigmove 01:15:50 DEBUG] transformed Y23Ma.SPC -> Y23MA.SPC
[sigmove 01:15:50 DEBUG] transformed Y23Mb.SPC -> Y23MB.SPC
[sigmove 01:15:50 DEBUG] transformed Y23Mc.SPC -> Y23MC.SPC
[sigmove 01:15:50 DEBUG] transformed Y23Md.SPC -> Y23MD.SPC
[sigmove 01:15:50 DEBUG] transformed Y23Me.SPC -> Y23ME.SPC
[sigmove 01:15:50 DEBUG] transformed Y23Mf.SPC -> Y23MF.SPC
[Status 01:15:50 INFO] data for Y23 transferred to science data processing
[Tidy 01:15:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:15:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:15:50 INFO] resetting WatchDogTimer
[Status 01:15:50 INFO] Starting Set [AERI set: name Z23, 6 scans, 0 angle, D16300 command]
[Ingest 01:15:50 INFO] Sending XML status message
[Status 01:15:50 INFO] Mirror angle: 0
[Mirror 01:15:50 INFO] rotating to position Z
[Status 01:15:50 INFO] .SET file for ACQ96 ready
[Ingest 01:15:50 INFO] Starting acquisition
[Status 01:15:50 INFO] reading housekeeping
[Status 01:16:08 INFO] acquire complete
[Status 01:16:09 INFO] writing housekeeping
[Sequencer 01:16:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:16:09 INFO] incremented Z scene to 23 completed views
[Sequencer 01:16:09 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:16:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:16:09 INFO] incremented to [AERI set: name A24, 6 scans, 120 angle, D28300 command] set
[sigmove 01:16:09 INFO] Z23.SIG(18)
[sigmove 01:16:09 DEBUG] transformed Z23Ma.SPC -> Z23MA.SPC
[sigmove 01:16:09 DEBUG] transformed Z23Mb.SPC -> Z23MB.SPC
[sigmove 01:16:09 DEBUG] transformed Z23Mc.SPC -> Z23MC.SPC
[sigmove 01:16:09 DEBUG] transformed Z23Md.SPC -> Z23MD.SPC
[sigmove 01:16:09 DEBUG] transformed Z23Me.SPC -> Z23ME.SPC
[sigmove 01:16:09 DEBUG] transformed Z23Mf.SPC -> Z23MF.SPC
[Status 01:16:09 INFO] data for Z23 transferred to science data processing
[Tidy 01:16:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:16:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:16:09 INFO] resetting WatchDogTimer
[Status 01:16:09 INFO] Starting Set [AERI set: name A24, 6 scans, 120 angle, D28300 command]
[Ingest 01:16:09 INFO] Sending XML status message
[Status 01:16:09 INFO] Mirror angle: 120
[Mirror 01:16:09 INFO] rotating to position A
[Status 01:16:10 INFO] .SET file for ACQ96 ready
[Ingest 01:16:10 INFO] Starting acquisition
[Status 01:16:10 INFO] reading housekeeping
[Status 01:16:29 INFO] acquire complete
[Status 01:16:29 INFO] writing housekeeping
[Sequencer 01:16:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:16:29 INFO] incremented A scene to 24 completed views
[Sequencer 01:16:29 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:16:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:16:29 INFO] incremented to [AERI set: name H24, 6 scans, 60 angle, D22500 command] set
[sigmove 01:16:29 INFO] A24.SIG(18)
[sigmove 01:16:29 DEBUG] transformed A24Ma.SPC -> A24MA.SPC
[sigmove 01:16:29 DEBUG] transformed A24Mb.SPC -> A24MB.SPC
[sigmove 01:16:29 DEBUG] transformed A24Mc.SPC -> A24MC.SPC
[sigmove 01:16:29 DEBUG] transformed A24Md.SPC -> A24MD.SPC
[sigmove 01:16:29 DEBUG] transformed A24Me.SPC -> A24ME.SPC
[sigmove 01:16:29 DEBUG] transformed A24Mf.SPC -> A24MF.SPC
[Status 01:16:29 INFO] data for A24 transferred to science data processing
[Tidy 01:16:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:16:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:16:29 INFO] resetting WatchDogTimer
[Status 01:16:29 INFO] Starting Set [AERI set: name H24, 6 scans, 60 angle, D22500 command]
[Ingest 01:16:29 INFO] Sending XML status message
[Status 01:16:29 INFO] Mirror angle: 60
[Mirror 01:16:29 INFO] rotating to position H
[Status 01:16:30 INFO] .SET file for ACQ96 ready
[Ingest 01:16:30 INFO] Starting acquisition
[Status 01:16:30 INFO] reading housekeeping
[Status 01:16:48 INFO] acquire complete
[Status 01:16:48 INFO] writing housekeeping
[Sequencer 01:16:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:16:48 INFO] incremented H scene to 24 completed views
[Sequencer 01:16:48 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:16:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:16:48 INFO] incremented to [AERI set: name S24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:16:48 INFO] H24.SIG(18)
[sigmove 01:16:48 DEBUG] transformed H24Ma.SPC -> H24MA.SPC
[sigmove 01:16:48 DEBUG] transformed H24Mb.SPC -> H24MB.SPC
[sigmove 01:16:48 DEBUG] transformed H24Mc.SPC -> H24MC.SPC
[sigmove 01:16:48 DEBUG] transformed H24Md.SPC -> H24MD.SPC
[sigmove 01:16:48 DEBUG] transformed H24Me.SPC -> H24ME.SPC
[sigmove 01:16:48 DEBUG] transformed H24Mf.SPC -> H24MF.SPC
[Status 01:16:48 INFO] data for H24 transferred to science data processing
[Tidy 01:16:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:16:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:16:48 INFO] resetting WatchDogTimer
[Status 01:16:48 INFO] Starting Set [AERI set: name S24, 6 scans, 0 angle, D16300 command]
[Ingest 01:16:48 INFO] Sending XML status message
[Status 01:16:48 INFO] Mirror angle: 0
[Mirror 01:16:48 INFO] rotating to position S
[Status 01:16:49 INFO] .SET file for ACQ96 ready
[Ingest 01:16:49 INFO] Starting acquisition
[Status 01:16:49 INFO] reading housekeeping
[Status 01:17:07 INFO] acquire complete
[Status 01:17:07 INFO] writing housekeeping
[Sequencer 01:17:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:17:07 INFO] incremented S scene to 24 completed views
[Sequencer 01:17:07 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:17:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:17:07 INFO] incremented to [AERI set: name T24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:17:07 INFO] S24.SIG(18)
[sigmove 01:17:07 DEBUG] transformed S24Ma.SPC -> S24MA.SPC
[sigmove 01:17:07 DEBUG] transformed S24Mb.SPC -> S24MB.SPC
[sigmove 01:17:07 DEBUG] transformed S24Mc.SPC -> S24MC.SPC
[sigmove 01:17:07 DEBUG] transformed S24Md.SPC -> S24MD.SPC
[sigmove 01:17:07 DEBUG] transformed S24Me.SPC -> S24ME.SPC
[sigmove 01:17:07 DEBUG] transformed S24Mf.SPC -> S24MF.SPC
[Status 01:17:07 INFO] data for S24 transferred to science data processing
[Tidy 01:17:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:17:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:17:07 INFO] resetting WatchDogTimer
[Status 01:17:07 INFO] Starting Set [AERI set: name T24, 6 scans, 0 angle, D16300 command]
[Ingest 01:17:07 INFO] Sending XML status message
[Status 01:17:07 INFO] Mirror angle: 0
[Mirror 01:17:07 INFO] rotating to position T
[Status 01:17:07 INFO] .SET file for ACQ96 ready
[Ingest 01:17:08 INFO] Starting acquisition
[Status 01:17:08 INFO] reading housekeeping
[Status 01:17:26 INFO] acquire complete
[Status 01:17:26 INFO] writing housekeeping
[Sequencer 01:17:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:17:26 INFO] incremented T scene to 24 completed views
[Sequencer 01:17:26 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:17:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:17:26 INFO] incremented to [AERI set: name U24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:17:26 INFO] T24.SIG(18)
[sigmove 01:17:26 DEBUG] transformed T24Ma.SPC -> T24MA.SPC
[sigmove 01:17:26 DEBUG] transformed T24Mb.SPC -> T24MB.SPC
[sigmove 01:17:26 DEBUG] transformed T24Mc.SPC -> T24MC.SPC
[sigmove 01:17:26 DEBUG] transformed T24Md.SPC -> T24MD.SPC
[sigmove 01:17:26 DEBUG] transformed T24Me.SPC -> T24ME.SPC
[sigmove 01:17:26 DEBUG] transformed T24Mf.SPC -> T24MF.SPC
[Status 01:17:26 INFO] data for T24 transferred to science data processing
[Tidy 01:17:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:17:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:17:26 INFO] resetting WatchDogTimer
[Status 01:17:26 INFO] Starting Set [AERI set: name U24, 6 scans, 0 angle, D16300 command]
[Ingest 01:17:26 INFO] Sending XML status message
[Status 01:17:26 INFO] Mirror angle: 0
[Mirror 01:17:26 INFO] rotating to position U
[Status 01:17:27 INFO] .SET file for ACQ96 ready
[Ingest 01:17:27 INFO] Starting acquisition
[Status 01:17:27 INFO] reading housekeeping
[Status 01:17:45 INFO] acquire complete
[Status 01:17:45 INFO] writing housekeeping
[Sequencer 01:17:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:17:45 INFO] incremented U scene to 24 completed views
[Sequencer 01:17:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:17:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:17:45 INFO] incremented to [AERI set: name V24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:17:45 INFO] U24.SIG(18)
[sigmove 01:17:45 DEBUG] transformed U24Ma.SPC -> U24MA.SPC
[sigmove 01:17:45 DEBUG] transformed U24Mb.SPC -> U24MB.SPC
[sigmove 01:17:45 DEBUG] transformed U24Mc.SPC -> U24MC.SPC
[sigmove 01:17:45 DEBUG] transformed U24Md.SPC -> U24MD.SPC
[sigmove 01:17:45 DEBUG] transformed U24Me.SPC -> U24ME.SPC
[sigmove 01:17:45 DEBUG] transformed U24Mf.SPC -> U24MF.SPC
[Status 01:17:45 INFO] data for U24 transferred to science data processing
[Tidy 01:17:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:17:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:17:45 INFO] resetting WatchDogTimer
[Status 01:17:45 INFO] Starting Set [AERI set: name V24, 6 scans, 0 angle, D16300 command]
[Ingest 01:17:45 INFO] Sending XML status message
[Status 01:17:45 INFO] Mirror angle: 0
[Mirror 01:17:45 INFO] rotating to position V
[Status 01:17:46 INFO] .SET file for ACQ96 ready
[Ingest 01:17:46 INFO] Starting acquisition
[Status 01:17:46 INFO] reading housekeeping
[Status 01:18:04 INFO] acquire complete
[Status 01:18:04 INFO] writing housekeeping
[Sequencer 01:18:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:18:04 INFO] incremented V scene to 24 completed views
[Sequencer 01:18:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:18:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:18:04 INFO] incremented to [AERI set: name W24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:18:04 INFO] V24.SIG(18)
[sigmove 01:18:04 DEBUG] transformed V24Ma.SPC -> V24MA.SPC
[sigmove 01:18:04 DEBUG] transformed V24Mb.SPC -> V24MB.SPC
[sigmove 01:18:04 DEBUG] transformed V24Mc.SPC -> V24MC.SPC
[sigmove 01:18:04 DEBUG] transformed V24Md.SPC -> V24MD.SPC
[sigmove 01:18:04 DEBUG] transformed V24Me.SPC -> V24ME.SPC
[sigmove 01:18:04 DEBUG] transformed V24Mf.SPC -> V24MF.SPC
[Status 01:18:04 INFO] data for V24 transferred to science data processing
[Tidy 01:18:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:18:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:18:04 INFO] resetting WatchDogTimer
[Status 01:18:04 INFO] Starting Set [AERI set: name W24, 6 scans, 0 angle, D16300 command]
[Ingest 01:18:04 INFO] Sending XML status message
[Status 01:18:04 INFO] Mirror angle: 0
[Mirror 01:18:05 INFO] rotating to position W
[Status 01:18:05 INFO] .SET file for ACQ96 ready
[Ingest 01:18:05 INFO] Starting acquisition
[Status 01:18:05 INFO] reading housekeeping
[Status 01:18:23 INFO] acquire complete
[Status 01:18:23 INFO] writing housekeeping
[Sequencer 01:18:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:18:23 INFO] incremented W scene to 24 completed views
[Sequencer 01:18:23 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:18:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:18:23 INFO] incremented to [AERI set: name X24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:18:23 INFO] W24.SIG(18)
[sigmove 01:18:23 DEBUG] transformed W24Ma.SPC -> W24MA.SPC
[sigmove 01:18:23 DEBUG] transformed W24Mb.SPC -> W24MB.SPC
[sigmove 01:18:23 DEBUG] transformed W24Mc.SPC -> W24MC.SPC
[sigmove 01:18:23 DEBUG] transformed W24Md.SPC -> W24MD.SPC
[sigmove 01:18:23 DEBUG] transformed W24Me.SPC -> W24ME.SPC
[sigmove 01:18:23 DEBUG] transformed W24Mf.SPC -> W24MF.SPC
[Status 01:18:23 INFO] data for W24 transferred to science data processing
[Tidy 01:18:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:18:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:18:23 INFO] resetting WatchDogTimer
[Status 01:18:24 INFO] Starting Set [AERI set: name X24, 6 scans, 0 angle, D16300 command]
[Ingest 01:18:24 INFO] Sending XML status message
[Status 01:18:24 INFO] Mirror angle: 0
[Mirror 01:18:24 INFO] rotating to position X
[Status 01:18:24 INFO] .SET file for ACQ96 ready
[Ingest 01:18:24 INFO] Starting acquisition
[Status 01:18:24 INFO] reading housekeeping
[Status 01:18:42 INFO] acquire complete
[Status 01:18:42 INFO] writing housekeeping
[Sequencer 01:18:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:18:42 INFO] incremented X scene to 24 completed views
[Sequencer 01:18:42 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:18:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:18:42 INFO] incremented to [AERI set: name Y24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:18:42 INFO] X24.SIG(18)
[sigmove 01:18:43 DEBUG] transformed X24Ma.SPC -> X24MA.SPC
[sigmove 01:18:43 DEBUG] transformed X24Mb.SPC -> X24MB.SPC
[sigmove 01:18:43 DEBUG] transformed X24Mc.SPC -> X24MC.SPC
[sigmove 01:18:43 DEBUG] transformed X24Md.SPC -> X24MD.SPC
[sigmove 01:18:43 DEBUG] transformed X24Me.SPC -> X24ME.SPC
[sigmove 01:18:43 DEBUG] transformed X24Mf.SPC -> X24MF.SPC
[Status 01:18:43 INFO] data for X24 transferred to science data processing
[Tidy 01:18:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:18:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:18:43 INFO] resetting WatchDogTimer
[Status 01:18:43 INFO] Starting Set [AERI set: name Y24, 6 scans, 0 angle, D16300 command]
[Ingest 01:18:43 INFO] Sending XML status message
[Status 01:18:43 INFO] Mirror angle: 0
[Mirror 01:18:43 INFO] rotating to position Y
[Status 01:18:43 INFO] .SET file for ACQ96 ready
[Ingest 01:18:43 INFO] Starting acquisition
[Status 01:18:43 INFO] reading housekeeping
[Status 01:19:01 INFO] acquire complete
[Status 01:19:02 INFO] writing housekeeping
[Sequencer 01:19:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:19:02 INFO] incremented Y scene to 24 completed views
[Sequencer 01:19:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:19:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:19:02 INFO] incremented to [AERI set: name Z24, 6 scans, 0 angle, D16300 command] set
[sigmove 01:19:02 INFO] Y24.SIG(18)
[sigmove 01:19:02 DEBUG] transformed Y24Ma.SPC -> Y24MA.SPC
[sigmove 01:19:02 DEBUG] transformed Y24Mb.SPC -> Y24MB.SPC
[sigmove 01:19:02 DEBUG] transformed Y24Mc.SPC -> Y24MC.SPC
[sigmove 01:19:02 DEBUG] transformed Y24Md.SPC -> Y24MD.SPC
[sigmove 01:19:02 DEBUG] transformed Y24Me.SPC -> Y24ME.SPC
[sigmove 01:19:02 DEBUG] transformed Y24Mf.SPC -> Y24MF.SPC
[Status 01:19:02 INFO] data for Y24 transferred to science data processing
[Tidy 01:19:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:19:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:19:02 INFO] resetting WatchDogTimer
[Status 01:19:02 INFO] Starting Set [AERI set: name Z24, 6 scans, 0 angle, D16300 command]
[Ingest 01:19:02 INFO] Sending XML status message
[Status 01:19:02 INFO] Mirror angle: 0
[Mirror 01:19:02 INFO] rotating to position Z
[Status 01:19:02 INFO] .SET file for ACQ96 ready
[Ingest 01:19:02 INFO] Starting acquisition
[Status 01:19:02 INFO] reading housekeeping
[Status 01:19:20 INFO] acquire complete
[Status 01:19:21 INFO] writing housekeeping
[Sequencer 01:19:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:19:21 INFO] incremented Z scene to 24 completed views
[Sequencer 01:19:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:19:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:19:21 INFO] incremented to [AERI set: name H25, 6 scans, 60 angle, D22500 command] set
[sigmove 01:19:21 INFO] Z24.SIG(18)
[sigmove 01:19:21 DEBUG] transformed Z24Ma.SPC -> Z24MA.SPC
[sigmove 01:19:21 DEBUG] transformed Z24Mb.SPC -> Z24MB.SPC
[sigmove 01:19:21 DEBUG] transformed Z24Mc.SPC -> Z24MC.SPC
[sigmove 01:19:21 DEBUG] transformed Z24Md.SPC -> Z24MD.SPC
[sigmove 01:19:21 DEBUG] transformed Z24Me.SPC -> Z24ME.SPC
[sigmove 01:19:21 DEBUG] transformed Z24Mf.SPC -> Z24MF.SPC
[Status 01:19:21 INFO] data for Z24 transferred to science data processing
[Tidy 01:19:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:19:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:19:21 INFO] resetting WatchDogTimer
[Status 01:19:21 INFO] Starting Set [AERI set: name H25, 6 scans, 60 angle, D22500 command]
[Ingest 01:19:21 INFO] Sending XML status message
[Status 01:19:21 INFO] Mirror angle: 60
[Mirror 01:19:21 INFO] rotating to position H
[Status 01:19:22 INFO] .SET file for ACQ96 ready
[Ingest 01:19:22 INFO] Starting acquisition
[Status 01:19:22 INFO] reading housekeeping
[Status 01:19:39 INFO] acquire complete
[Status 01:19:40 INFO] writing housekeeping
[Sequencer 01:19:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:19:40 INFO] incremented H scene to 25 completed views
[Sequencer 01:19:40 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:19:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:19:40 INFO] incremented to [AERI set: name A25, 6 scans, 120 angle, D28300 command] set
[sigmove 01:19:40 INFO] H25.SIG(18)
[sigmove 01:19:40 DEBUG] transformed H25Ma.SPC -> H25MA.SPC
[sigmove 01:19:40 DEBUG] transformed H25Mb.SPC -> H25MB.SPC
[sigmove 01:19:40 DEBUG] transformed H25Mc.SPC -> H25MC.SPC
[sigmove 01:19:40 DEBUG] transformed H25Md.SPC -> H25MD.SPC
[sigmove 01:19:40 DEBUG] transformed H25Me.SPC -> H25ME.SPC
[sigmove 01:19:40 DEBUG] transformed H25Mf.SPC -> H25MF.SPC
[Status 01:19:40 INFO] data for H25 transferred to science data processing
[Tidy 01:19:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:19:40 INFO] A23.FIN(19),H23.FIN(19),S23.FIN(19),T23.FIN(19),U23.FIN(19),V23.FIN(19),W23.FIN(19),X23.FIN(19),Y23.FIN(19),Z23.FIN(19),A24.FIN(19),H24.FIN(19),S24.FIN(19),T24.FIN(19),U24.FIN(19),V24.FIN(19),W24.FIN(19),X24.FIN(19),Y24.FIN(19),Z24.FIN(19)
[sigmove 01:19:40 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:19:40 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:19:41 DEBUG] done zipping
[WatchDog 01:19:41 INFO] resetting WatchDogTimer
[Status 01:19:41 INFO] Starting Set [AERI set: name A25, 6 scans, 120 angle, D28300 command]
[Ingest 01:19:41 INFO] Sending XML status message
[Status 01:19:41 INFO] Mirror angle: 120
[Mirror 01:19:41 INFO] rotating to position A
[Status 01:19:41 INFO] .SET file for ACQ96 ready
[Ingest 01:19:42 INFO] Starting acquisition
[Status 01:19:42 INFO] reading housekeeping
[Status 01:20:00 INFO] acquire complete
[Status 01:20:01 INFO] writing housekeeping
[Sequencer 01:20:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:20:01 INFO] incremented A scene to 25 completed views
[Sequencer 01:20:01 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:20:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:20:01 INFO] incremented to [AERI set: name S25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:20:01 INFO] A25.SIG(18)
[sigmove 01:20:01 DEBUG] transformed A25Ma.SPC -> A25MA.SPC
[sigmove 01:20:01 DEBUG] transformed A25Mb.SPC -> A25MB.SPC
[sigmove 01:20:01 DEBUG] transformed A25Mc.SPC -> A25MC.SPC
[sigmove 01:20:01 DEBUG] transformed A25Md.SPC -> A25MD.SPC
[sigmove 01:20:01 DEBUG] transformed A25Me.SPC -> A25ME.SPC
[sigmove 01:20:01 DEBUG] transformed A25Mf.SPC -> A25MF.SPC
[Status 01:20:01 INFO] data for A25 transferred to science data processing
[Tidy 01:20:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:20:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:20:01 INFO] resetting WatchDogTimer
[Status 01:20:01 INFO] Starting Set [AERI set: name S25, 6 scans, 0 angle, D16300 command]
[Ingest 01:20:01 INFO] Sending XML status message
[Status 01:20:01 INFO] Mirror angle: 0
[Mirror 01:20:01 INFO] rotating to position S
[Status 01:20:02 INFO] .SET file for ACQ96 ready
[Ingest 01:20:02 INFO] Starting acquisition
[Status 01:20:02 INFO] reading housekeeping
[Status 01:20:20 INFO] acquire complete
[Status 01:20:20 INFO] writing housekeeping
[Sequencer 01:20:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:20:20 INFO] incremented S scene to 25 completed views
[Sequencer 01:20:20 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:20:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:20:20 INFO] incremented to [AERI set: name T25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:20:20 INFO] S25.SIG(18)
[sigmove 01:20:20 DEBUG] transformed S25Ma.SPC -> S25MA.SPC
[sigmove 01:20:20 DEBUG] transformed S25Mb.SPC -> S25MB.SPC
[sigmove 01:20:20 DEBUG] transformed S25Mc.SPC -> S25MC.SPC
[sigmove 01:20:20 DEBUG] transformed S25Md.SPC -> S25MD.SPC
[sigmove 01:20:20 DEBUG] transformed S25Me.SPC -> S25ME.SPC
[sigmove 01:20:20 DEBUG] transformed S25Mf.SPC -> S25MF.SPC
[Status 01:20:20 INFO] data for S25 transferred to science data processing
[Tidy 01:20:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:20:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:20:20 INFO] resetting WatchDogTimer
[Status 01:20:20 INFO] Starting Set [AERI set: name T25, 6 scans, 0 angle, D16300 command]
[Ingest 01:20:20 INFO] Sending XML status message
[Status 01:20:20 INFO] Mirror angle: 0
[Mirror 01:20:20 INFO] rotating to position T
[Status 01:20:21 INFO] .SET file for ACQ96 ready
[Ingest 01:20:21 INFO] Starting acquisition
[Status 01:20:21 INFO] reading housekeeping
[Status 01:20:39 INFO] acquire complete
[Status 01:20:39 INFO] writing housekeeping
[Sequencer 01:20:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:20:39 INFO] incremented T scene to 25 completed views
[Sequencer 01:20:39 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:20:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:20:39 INFO] incremented to [AERI set: name U25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:20:39 INFO] T25.SIG(18)
[sigmove 01:20:39 DEBUG] transformed T25Ma.SPC -> T25MA.SPC
[sigmove 01:20:39 DEBUG] transformed T25Mb.SPC -> T25MB.SPC
[sigmove 01:20:39 DEBUG] transformed T25Mc.SPC -> T25MC.SPC
[sigmove 01:20:39 DEBUG] transformed T25Md.SPC -> T25MD.SPC
[sigmove 01:20:39 DEBUG] transformed T25Me.SPC -> T25ME.SPC
[sigmove 01:20:39 DEBUG] transformed T25Mf.SPC -> T25MF.SPC
[Status 01:20:39 INFO] data for T25 transferred to science data processing
[Tidy 01:20:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:20:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:20:39 INFO] resetting WatchDogTimer
[Status 01:20:39 INFO] Starting Set [AERI set: name U25, 6 scans, 0 angle, D16300 command]
[Ingest 01:20:39 INFO] Sending XML status message
[Status 01:20:39 INFO] Mirror angle: 0
[Mirror 01:20:39 INFO] rotating to position U
[Status 01:20:40 INFO] .SET file for ACQ96 ready
[Ingest 01:20:40 INFO] Starting acquisition
[Status 01:20:40 INFO] reading housekeeping
[Status 01:20:58 INFO] acquire complete
[Status 01:20:58 INFO] writing housekeeping
[Sequencer 01:20:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:20:58 INFO] incremented U scene to 25 completed views
[Sequencer 01:20:58 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:20:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:20:58 INFO] incremented to [AERI set: name V25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:20:58 INFO] U25.SIG(18)
[sigmove 01:20:58 DEBUG] transformed U25Ma.SPC -> U25MA.SPC
[sigmove 01:20:58 DEBUG] transformed U25Mb.SPC -> U25MB.SPC
[sigmove 01:20:58 DEBUG] transformed U25Mc.SPC -> U25MC.SPC
[sigmove 01:20:58 DEBUG] transformed U25Md.SPC -> U25MD.SPC
[sigmove 01:20:58 DEBUG] transformed U25Me.SPC -> U25ME.SPC
[sigmove 01:20:58 DEBUG] transformed U25Mf.SPC -> U25MF.SPC
[Status 01:20:58 INFO] data for U25 transferred to science data processing
[Tidy 01:20:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:20:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:20:58 INFO] resetting WatchDogTimer
[Status 01:20:58 INFO] Starting Set [AERI set: name V25, 6 scans, 0 angle, D16300 command]
[Ingest 01:20:58 INFO] Sending XML status message
[Status 01:20:58 INFO] Mirror angle: 0
[Mirror 01:20:59 INFO] rotating to position V
[Status 01:20:59 INFO] .SET file for ACQ96 ready
[Ingest 01:20:59 INFO] Starting acquisition
[Status 01:20:59 INFO] reading housekeeping
[Status 01:21:17 INFO] acquire complete
[Status 01:21:17 INFO] writing housekeeping
[Sequencer 01:21:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:21:17 INFO] incremented V scene to 25 completed views
[Sequencer 01:21:17 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:21:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:21:17 INFO] incremented to [AERI set: name W25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:21:17 INFO] V25.SIG(18)
[sigmove 01:21:17 DEBUG] transformed V25Ma.SPC -> V25MA.SPC
[sigmove 01:21:17 DEBUG] transformed V25Mb.SPC -> V25MB.SPC
[sigmove 01:21:17 DEBUG] transformed V25Mc.SPC -> V25MC.SPC
[sigmove 01:21:17 DEBUG] transformed V25Md.SPC -> V25MD.SPC
[sigmove 01:21:17 DEBUG] transformed V25Me.SPC -> V25ME.SPC
[sigmove 01:21:17 DEBUG] transformed V25Mf.SPC -> V25MF.SPC
[Status 01:21:17 INFO] data for V25 transferred to science data processing
[Tidy 01:21:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:21:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:21:17 INFO] resetting WatchDogTimer
[Status 01:21:18 INFO] Starting Set [AERI set: name W25, 6 scans, 0 angle, D16300 command]
[Ingest 01:21:18 INFO] Sending XML status message
[Status 01:21:18 INFO] Mirror angle: 0
[Mirror 01:21:18 INFO] rotating to position W
[Status 01:21:18 INFO] .SET file for ACQ96 ready
[Ingest 01:21:18 INFO] Starting acquisition
[Status 01:21:18 INFO] reading housekeeping
[Status 01:21:36 INFO] acquire complete
[Status 01:21:37 INFO] writing housekeeping
[Sequencer 01:21:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:21:37 INFO] incremented W scene to 25 completed views
[Sequencer 01:21:37 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:21:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:21:37 INFO] incremented to [AERI set: name X25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:21:37 INFO] W25.SIG(18)
[sigmove 01:21:37 DEBUG] transformed W25Ma.SPC -> W25MA.SPC
[sigmove 01:21:37 DEBUG] transformed W25Mb.SPC -> W25MB.SPC
[sigmove 01:21:37 DEBUG] transformed W25Mc.SPC -> W25MC.SPC
[sigmove 01:21:37 DEBUG] transformed W25Md.SPC -> W25MD.SPC
[sigmove 01:21:37 DEBUG] transformed W25Me.SPC -> W25ME.SPC
[sigmove 01:21:37 DEBUG] transformed W25Mf.SPC -> W25MF.SPC
[Status 01:21:37 INFO] data for W25 transferred to science data processing
[Tidy 01:21:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:21:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:21:37 INFO] resetting WatchDogTimer
[Status 01:21:37 INFO] Starting Set [AERI set: name X25, 6 scans, 0 angle, D16300 command]
[Ingest 01:21:37 INFO] Sending XML status message
[Status 01:21:37 INFO] Mirror angle: 0
[Mirror 01:21:37 INFO] rotating to position X
[Status 01:21:37 INFO] .SET file for ACQ96 ready
[Ingest 01:21:37 INFO] Starting acquisition
[Status 01:21:37 INFO] reading housekeeping
[Status 01:21:55 INFO] acquire complete
[Status 01:21:56 INFO] writing housekeeping
[Sequencer 01:21:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:21:56 INFO] incremented X scene to 25 completed views
[Sequencer 01:21:56 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:21:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:21:56 INFO] incremented to [AERI set: name Y25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:21:56 INFO] X25.SIG(18)
[sigmove 01:21:56 DEBUG] transformed X25Ma.SPC -> X25MA.SPC
[sigmove 01:21:56 DEBUG] transformed X25Mb.SPC -> X25MB.SPC
[sigmove 01:21:56 DEBUG] transformed X25Mc.SPC -> X25MC.SPC
[sigmove 01:21:56 DEBUG] transformed X25Md.SPC -> X25MD.SPC
[sigmove 01:21:56 DEBUG] transformed X25Me.SPC -> X25ME.SPC
[sigmove 01:21:56 DEBUG] transformed X25Mf.SPC -> X25MF.SPC
[Status 01:21:56 INFO] data for X25 transferred to science data processing
[Tidy 01:21:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:21:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:21:56 INFO] resetting WatchDogTimer
[Status 01:21:56 INFO] Starting Set [AERI set: name Y25, 6 scans, 0 angle, D16300 command]
[Ingest 01:21:56 INFO] Sending XML status message
[Status 01:21:56 INFO] Mirror angle: 0
[Mirror 01:21:56 INFO] rotating to position Y
[Status 01:21:56 INFO] .SET file for ACQ96 ready
[Ingest 01:21:56 INFO] Starting acquisition
[Status 01:21:56 INFO] reading housekeeping
[Status 01:22:14 INFO] acquire complete
[Status 01:22:15 INFO] writing housekeeping
[Sequencer 01:22:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:22:15 INFO] incremented Y scene to 25 completed views
[Sequencer 01:22:15 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:22:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:22:15 INFO] incremented to [AERI set: name Z25, 6 scans, 0 angle, D16300 command] set
[sigmove 01:22:15 INFO] Y25.SIG(18)
[sigmove 01:22:15 DEBUG] transformed Y25Ma.SPC -> Y25MA.SPC
[sigmove 01:22:15 DEBUG] transformed Y25Mb.SPC -> Y25MB.SPC
[sigmove 01:22:15 DEBUG] transformed Y25Mc.SPC -> Y25MC.SPC
[sigmove 01:22:15 DEBUG] transformed Y25Md.SPC -> Y25MD.SPC
[sigmove 01:22:15 DEBUG] transformed Y25Me.SPC -> Y25ME.SPC
[sigmove 01:22:15 DEBUG] transformed Y25Mf.SPC -> Y25MF.SPC
[Status 01:22:15 INFO] data for Y25 transferred to science data processing
[Tidy 01:22:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:22:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:22:15 INFO] resetting WatchDogTimer
[Status 01:22:15 INFO] Starting Set [AERI set: name Z25, 6 scans, 0 angle, D16300 command]
[Ingest 01:22:15 INFO] Sending XML status message
[Status 01:22:15 INFO] Mirror angle: 0
[Mirror 01:22:15 INFO] rotating to position Z
[Status 01:22:15 INFO] .SET file for ACQ96 ready
[Ingest 01:22:15 INFO] Starting acquisition
[Status 01:22:15 INFO] reading housekeeping
[Status 01:22:33 INFO] acquire complete
[Status 01:22:34 INFO] writing housekeeping
[Sequencer 01:22:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:22:34 INFO] incremented Z scene to 25 completed views
[Sequencer 01:22:34 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:22:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:22:34 INFO] incremented to [AERI set: name A26, 6 scans, 120 angle, D28300 command] set
[sigmove 01:22:34 INFO] Z25.SIG(18)
[sigmove 01:22:34 DEBUG] transformed Z25Ma.SPC -> Z25MA.SPC
[sigmove 01:22:34 DEBUG] transformed Z25Mb.SPC -> Z25MB.SPC
[sigmove 01:22:34 DEBUG] transformed Z25Mc.SPC -> Z25MC.SPC
[sigmove 01:22:34 DEBUG] transformed Z25Md.SPC -> Z25MD.SPC
[sigmove 01:22:34 DEBUG] transformed Z25Me.SPC -> Z25ME.SPC
[sigmove 01:22:34 DEBUG] transformed Z25Mf.SPC -> Z25MF.SPC
[Status 01:22:34 INFO] data for Z25 transferred to science data processing
[Tidy 01:22:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:22:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:22:34 INFO] resetting WatchDogTimer
[Status 01:22:34 INFO] Starting Set [AERI set: name A26, 6 scans, 120 angle, D28300 command]
[Ingest 01:22:34 INFO] Sending XML status message
[Status 01:22:34 INFO] Mirror angle: 120
[Mirror 01:22:34 INFO] rotating to position A
[Status 01:22:35 INFO] .SET file for ACQ96 ready
[Ingest 01:22:35 INFO] Starting acquisition
[Status 01:22:35 INFO] reading housekeeping
[Status 01:22:54 INFO] acquire complete
[Status 01:22:54 INFO] writing housekeeping
[Sequencer 01:22:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:22:54 INFO] incremented A scene to 26 completed views
[Sequencer 01:22:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:22:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:22:54 INFO] incremented to [AERI set: name H26, 6 scans, 60 angle, D22500 command] set
[sigmove 01:22:54 INFO] A26.SIG(18)
[sigmove 01:22:54 DEBUG] transformed A26Ma.SPC -> A26MA.SPC
[sigmove 01:22:54 DEBUG] transformed A26Mb.SPC -> A26MB.SPC
[sigmove 01:22:54 DEBUG] transformed A26Mc.SPC -> A26MC.SPC
[sigmove 01:22:54 DEBUG] transformed A26Md.SPC -> A26MD.SPC
[sigmove 01:22:54 DEBUG] transformed A26Me.SPC -> A26ME.SPC
[sigmove 01:22:54 DEBUG] transformed A26Mf.SPC -> A26MF.SPC
[Status 01:22:54 INFO] data for A26 transferred to science data processing
[Tidy 01:22:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:22:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:22:54 INFO] resetting WatchDogTimer
[Status 01:22:54 INFO] Starting Set [AERI set: name H26, 6 scans, 60 angle, D22500 command]
[Ingest 01:22:54 INFO] Sending XML status message
[Status 01:22:54 INFO] Mirror angle: 60
[Mirror 01:22:54 INFO] rotating to position H
[Status 01:22:55 INFO] .SET file for ACQ96 ready
[Ingest 01:22:55 INFO] Starting acquisition
[Status 01:22:55 INFO] reading housekeeping
[Status 01:23:13 INFO] acquire complete
[Status 01:23:13 INFO] writing housekeeping
[Sequencer 01:23:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:23:13 INFO] incremented H scene to 26 completed views
[Sequencer 01:23:13 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:23:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:23:13 INFO] incremented to [AERI set: name S26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:23:13 INFO] H26.SIG(18)
[sigmove 01:23:13 DEBUG] transformed H26Ma.SPC -> H26MA.SPC
[sigmove 01:23:13 DEBUG] transformed H26Mb.SPC -> H26MB.SPC
[sigmove 01:23:13 DEBUG] transformed H26Mc.SPC -> H26MC.SPC
[sigmove 01:23:13 DEBUG] transformed H26Md.SPC -> H26MD.SPC
[sigmove 01:23:13 DEBUG] transformed H26Me.SPC -> H26ME.SPC
[sigmove 01:23:13 DEBUG] transformed H26Mf.SPC -> H26MF.SPC
[Status 01:23:13 INFO] data for H26 transferred to science data processing
[Tidy 01:23:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:23:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:23:13 INFO] resetting WatchDogTimer
[Status 01:23:13 INFO] Starting Set [AERI set: name S26, 6 scans, 0 angle, D16300 command]
[Ingest 01:23:13 INFO] Sending XML status message
[Status 01:23:13 INFO] Mirror angle: 0
[Mirror 01:23:13 INFO] rotating to position S
[Status 01:23:14 INFO] .SET file for ACQ96 ready
[Ingest 01:23:14 INFO] Starting acquisition
[Status 01:23:14 INFO] reading housekeeping
[Status 01:23:32 INFO] acquire complete
[Status 01:23:32 INFO] writing housekeeping
[Sequencer 01:23:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:23:32 INFO] incremented S scene to 26 completed views
[Sequencer 01:23:32 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:23:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:23:32 INFO] incremented to [AERI set: name T26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:23:32 INFO] S26.SIG(18)
[sigmove 01:23:32 DEBUG] transformed S26Ma.SPC -> S26MA.SPC
[sigmove 01:23:32 DEBUG] transformed S26Mb.SPC -> S26MB.SPC
[sigmove 01:23:32 DEBUG] transformed S26Mc.SPC -> S26MC.SPC
[sigmove 01:23:32 DEBUG] transformed S26Md.SPC -> S26MD.SPC
[sigmove 01:23:32 DEBUG] transformed S26Me.SPC -> S26ME.SPC
[sigmove 01:23:32 DEBUG] transformed S26Mf.SPC -> S26MF.SPC
[Status 01:23:32 INFO] data for S26 transferred to science data processing
[Tidy 01:23:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:23:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:23:32 INFO] resetting WatchDogTimer
[Status 01:23:32 INFO] Starting Set [AERI set: name T26, 6 scans, 0 angle, D16300 command]
[Ingest 01:23:32 INFO] Sending XML status message
[Status 01:23:32 INFO] Mirror angle: 0
[Mirror 01:23:32 INFO] rotating to position T
[Status 01:23:33 INFO] .SET file for ACQ96 ready
[Ingest 01:23:33 INFO] Starting acquisition
[Status 01:23:33 INFO] reading housekeeping
[Status 01:23:51 INFO] acquire complete
[Status 01:23:51 INFO] writing housekeeping
[Sequencer 01:23:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:23:51 INFO] incremented T scene to 26 completed views
[Sequencer 01:23:51 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:23:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:23:51 INFO] incremented to [AERI set: name U26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:23:51 INFO] T26.SIG(18)
[sigmove 01:23:51 DEBUG] transformed T26Ma.SPC -> T26MA.SPC
[sigmove 01:23:51 DEBUG] transformed T26Mb.SPC -> T26MB.SPC
[sigmove 01:23:51 DEBUG] transformed T26Mc.SPC -> T26MC.SPC
[sigmove 01:23:51 DEBUG] transformed T26Md.SPC -> T26MD.SPC
[sigmove 01:23:51 DEBUG] transformed T26Me.SPC -> T26ME.SPC
[sigmove 01:23:51 DEBUG] transformed T26Mf.SPC -> T26MF.SPC
[Status 01:23:51 INFO] data for T26 transferred to science data processing
[Tidy 01:23:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:23:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:23:51 INFO] resetting WatchDogTimer
[Status 01:23:51 INFO] Starting Set [AERI set: name U26, 6 scans, 0 angle, D16300 command]
[Ingest 01:23:51 INFO] Sending XML status message
[Status 01:23:51 INFO] Mirror angle: 0
[Mirror 01:23:51 INFO] rotating to position U
[Status 01:23:52 INFO] .SET file for ACQ96 ready
[Ingest 01:23:52 INFO] Starting acquisition
[Status 01:23:52 INFO] reading housekeeping
[Status 01:24:10 INFO] acquire complete
[Status 01:24:10 INFO] writing housekeeping
[Sequencer 01:24:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:24:10 INFO] incremented U scene to 26 completed views
[Sequencer 01:24:10 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:24:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:24:10 INFO] incremented to [AERI set: name V26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:24:10 INFO] U26.SIG(18)
[sigmove 01:24:10 DEBUG] transformed U26Ma.SPC -> U26MA.SPC
[sigmove 01:24:10 DEBUG] transformed U26Mb.SPC -> U26MB.SPC
[sigmove 01:24:10 DEBUG] transformed U26Mc.SPC -> U26MC.SPC
[sigmove 01:24:10 DEBUG] transformed U26Md.SPC -> U26MD.SPC
[sigmove 01:24:10 DEBUG] transformed U26Me.SPC -> U26ME.SPC
[sigmove 01:24:10 DEBUG] transformed U26Mf.SPC -> U26MF.SPC
[Status 01:24:10 INFO] data for U26 transferred to science data processing
[Tidy 01:24:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:24:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:24:10 INFO] resetting WatchDogTimer
[Status 01:24:10 INFO] Starting Set [AERI set: name V26, 6 scans, 0 angle, D16300 command]
[Ingest 01:24:10 INFO] Sending XML status message
[Status 01:24:10 INFO] Mirror angle: 0
[Mirror 01:24:11 INFO] rotating to position V
[Status 01:24:11 INFO] .SET file for ACQ96 ready
[Ingest 01:24:11 INFO] Starting acquisition
[Status 01:24:11 INFO] reading housekeeping
[Status 01:24:29 INFO] acquire complete
[Status 01:24:30 INFO] writing housekeeping
[Sequencer 01:24:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:24:30 INFO] incremented V scene to 26 completed views
[Sequencer 01:24:30 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:24:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:24:30 INFO] incremented to [AERI set: name W26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:24:30 INFO] V26.SIG(18)
[sigmove 01:24:30 DEBUG] transformed V26Ma.SPC -> V26MA.SPC
[sigmove 01:24:30 DEBUG] transformed V26Mb.SPC -> V26MB.SPC
[sigmove 01:24:30 DEBUG] transformed V26Mc.SPC -> V26MC.SPC
[sigmove 01:24:30 DEBUG] transformed V26Md.SPC -> V26MD.SPC
[sigmove 01:24:30 DEBUG] transformed V26Me.SPC -> V26ME.SPC
[sigmove 01:24:30 DEBUG] transformed V26Mf.SPC -> V26MF.SPC
[Status 01:24:30 INFO] data for V26 transferred to science data processing
[Tidy 01:24:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:24:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:24:30 INFO] resetting WatchDogTimer
[Status 01:24:30 INFO] Starting Set [AERI set: name W26, 6 scans, 0 angle, D16300 command]
[Ingest 01:24:30 INFO] Sending XML status message
[Status 01:24:30 INFO] Mirror angle: 0
[Mirror 01:24:30 INFO] rotating to position W
[Status 01:24:31 INFO] .SET file for ACQ96 ready
[Ingest 01:24:31 INFO] Starting acquisition
[Status 01:24:31 INFO] reading housekeeping
[Status 01:24:48 INFO] acquire complete
[Status 01:24:49 INFO] writing housekeeping
[Sequencer 01:24:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:24:49 INFO] incremented W scene to 26 completed views
[Sequencer 01:24:49 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:24:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:24:49 INFO] incremented to [AERI set: name X26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:24:49 INFO] W26.SIG(18)
[sigmove 01:24:49 DEBUG] transformed W26Ma.SPC -> W26MA.SPC
[sigmove 01:24:49 DEBUG] transformed W26Mb.SPC -> W26MB.SPC
[sigmove 01:24:49 DEBUG] transformed W26Mc.SPC -> W26MC.SPC
[sigmove 01:24:49 DEBUG] transformed W26Md.SPC -> W26MD.SPC
[sigmove 01:24:49 DEBUG] transformed W26Me.SPC -> W26ME.SPC
[sigmove 01:24:49 DEBUG] transformed W26Mf.SPC -> W26MF.SPC
[Status 01:24:49 INFO] data for W26 transferred to science data processing
[Tidy 01:24:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:24:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:24:49 INFO] resetting WatchDogTimer
[Status 01:24:49 INFO] Starting Set [AERI set: name X26, 6 scans, 0 angle, D16300 command]
[Ingest 01:24:49 INFO] Sending XML status message
[Status 01:24:49 INFO] Mirror angle: 0
[Mirror 01:24:49 INFO] rotating to position X
[Status 01:24:49 INFO] .SET file for ACQ96 ready
[Ingest 01:24:49 INFO] Starting acquisition
[Status 01:24:49 INFO] reading housekeeping
[Status 01:25:07 INFO] acquire complete
[Status 01:25:08 INFO] writing housekeeping
[Sequencer 01:25:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:25:08 INFO] incremented X scene to 26 completed views
[Sequencer 01:25:08 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:25:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:25:08 INFO] incremented to [AERI set: name Y26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:25:08 INFO] X26.SIG(18)
[sigmove 01:25:08 DEBUG] transformed X26Ma.SPC -> X26MA.SPC
[sigmove 01:25:08 DEBUG] transformed X26Mb.SPC -> X26MB.SPC
[sigmove 01:25:08 DEBUG] transformed X26Mc.SPC -> X26MC.SPC
[sigmove 01:25:08 DEBUG] transformed X26Md.SPC -> X26MD.SPC
[sigmove 01:25:08 DEBUG] transformed X26Me.SPC -> X26ME.SPC
[sigmove 01:25:08 DEBUG] transformed X26Mf.SPC -> X26MF.SPC
[Status 01:25:08 INFO] data for X26 transferred to science data processing
[Tidy 01:25:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:25:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:25:08 INFO] resetting WatchDogTimer
[Status 01:25:08 INFO] Starting Set [AERI set: name Y26, 6 scans, 0 angle, D16300 command]
[Ingest 01:25:08 INFO] Sending XML status message
[Status 01:25:08 INFO] Mirror angle: 0
[Mirror 01:25:08 INFO] rotating to position Y
[Status 01:25:08 INFO] .SET file for ACQ96 ready
[Ingest 01:25:08 INFO] Starting acquisition
[Status 01:25:08 INFO] reading housekeeping
[Status 01:25:26 INFO] acquire complete
[Status 01:25:27 INFO] writing housekeeping
[Sequencer 01:25:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:25:27 INFO] incremented Y scene to 26 completed views
[Sequencer 01:25:27 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:25:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:25:27 INFO] incremented to [AERI set: name Z26, 6 scans, 0 angle, D16300 command] set
[sigmove 01:25:27 INFO] Y26.SIG(18)
[sigmove 01:25:27 DEBUG] transformed Y26Ma.SPC -> Y26MA.SPC
[sigmove 01:25:27 DEBUG] transformed Y26Mb.SPC -> Y26MB.SPC
[sigmove 01:25:27 DEBUG] transformed Y26Mc.SPC -> Y26MC.SPC
[sigmove 01:25:27 DEBUG] transformed Y26Md.SPC -> Y26MD.SPC
[sigmove 01:25:27 DEBUG] transformed Y26Me.SPC -> Y26ME.SPC
[sigmove 01:25:27 DEBUG] transformed Y26Mf.SPC -> Y26MF.SPC
[Status 01:25:27 INFO] data for Y26 transferred to science data processing
[Tidy 01:25:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:25:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:25:27 INFO] resetting WatchDogTimer
[Status 01:25:27 INFO] Starting Set [AERI set: name Z26, 6 scans, 0 angle, D16300 command]
[Ingest 01:25:27 INFO] Sending XML status message
[Status 01:25:27 INFO] Mirror angle: 0
[Mirror 01:25:27 INFO] rotating to position Z
[Status 01:25:27 INFO] .SET file for ACQ96 ready
[Ingest 01:25:27 INFO] Starting acquisition
[Status 01:25:27 INFO] reading housekeeping
[Status 01:25:45 INFO] acquire complete
[Status 01:25:46 INFO] writing housekeeping
[Sequencer 01:25:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:25:46 INFO] incremented Z scene to 26 completed views
[Sequencer 01:25:46 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:25:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:25:46 INFO] incremented to [AERI set: name H27, 6 scans, 60 angle, D22500 command] set
[sigmove 01:25:46 INFO] Z26.SIG(18)
[sigmove 01:25:46 DEBUG] transformed Z26Ma.SPC -> Z26MA.SPC
[sigmove 01:25:46 DEBUG] transformed Z26Mb.SPC -> Z26MB.SPC
[sigmove 01:25:46 DEBUG] transformed Z26Mc.SPC -> Z26MC.SPC
[sigmove 01:25:46 DEBUG] transformed Z26Md.SPC -> Z26MD.SPC
[sigmove 01:25:46 DEBUG] transformed Z26Me.SPC -> Z26ME.SPC
[sigmove 01:25:46 DEBUG] transformed Z26Mf.SPC -> Z26MF.SPC
[Status 01:25:46 INFO] data for Z26 transferred to science data processing
[Tidy 01:25:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:25:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:25:46 INFO] resetting WatchDogTimer
[Status 01:25:46 INFO] Starting Set [AERI set: name H27, 6 scans, 60 angle, D22500 command]
[Ingest 01:25:46 INFO] Sending XML status message
[Status 01:25:46 INFO] Mirror angle: 60
[Mirror 01:25:46 INFO] rotating to position H
[Status 01:25:47 INFO] .SET file for ACQ96 ready
[Ingest 01:25:47 INFO] Starting acquisition
[Status 01:25:47 INFO] reading housekeeping
[Status 01:26:05 INFO] acquire complete
[Status 01:26:05 INFO] writing housekeeping
[Sequencer 01:26:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:26:05 INFO] incremented H scene to 27 completed views
[Sequencer 01:26:05 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:26:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:26:05 INFO] incremented to [AERI set: name A27, 6 scans, 120 angle, D28300 command] set
[sigmove 01:26:05 INFO] H27.SIG(18)
[sigmove 01:26:05 DEBUG] transformed H27Ma.SPC -> H27MA.SPC
[sigmove 01:26:05 DEBUG] transformed H27Mb.SPC -> H27MB.SPC
[sigmove 01:26:05 DEBUG] transformed H27Mc.SPC -> H27MC.SPC
[sigmove 01:26:05 DEBUG] transformed H27Md.SPC -> H27MD.SPC
[sigmove 01:26:05 DEBUG] transformed H27Me.SPC -> H27ME.SPC
[sigmove 01:26:05 DEBUG] transformed H27Mf.SPC -> H27MF.SPC
[Status 01:26:05 INFO] data for H27 transferred to science data processing
[Tidy 01:26:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:26:05 INFO] A25.FIN(19),H25.FIN(19),S25.FIN(19),T25.FIN(19),U25.FIN(19),V25.FIN(19),W25.FIN(19),X25.FIN(19),Y25.FIN(19),Z25.FIN(19),A26.FIN(19),H26.FIN(19),S26.FIN(19),T26.FIN(19),U26.FIN(19),V26.FIN(19),W26.FIN(19),X26.FIN(19),Y26.FIN(19),Z26.FIN(19)
[sigmove 01:26:05 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:26:05 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:26:06 DEBUG] done zipping
[WatchDog 01:26:06 INFO] resetting WatchDogTimer
[Status 01:26:06 INFO] Starting Set [AERI set: name A27, 6 scans, 120 angle, D28300 command]
[Ingest 01:26:06 INFO] Sending XML status message
[Status 01:26:06 INFO] Mirror angle: 120
[Mirror 01:26:06 INFO] rotating to position A
[Status 01:26:07 INFO] .SET file for ACQ96 ready
[Ingest 01:26:07 INFO] Starting acquisition
[Status 01:26:07 INFO] reading housekeeping
[Status 01:26:25 INFO] acquire complete
[Status 01:26:25 INFO] writing housekeeping
[Sequencer 01:26:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:26:25 INFO] incremented A scene to 27 completed views
[Sequencer 01:26:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:26:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:26:25 INFO] incremented to [AERI set: name S27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:26:25 INFO] A27.SIG(18)
[sigmove 01:26:25 DEBUG] transformed A27Ma.SPC -> A27MA.SPC
[sigmove 01:26:25 DEBUG] transformed A27Mb.SPC -> A27MB.SPC
[sigmove 01:26:25 DEBUG] transformed A27Mc.SPC -> A27MC.SPC
[sigmove 01:26:25 DEBUG] transformed A27Md.SPC -> A27MD.SPC
[sigmove 01:26:25 DEBUG] transformed A27Me.SPC -> A27ME.SPC
[sigmove 01:26:25 DEBUG] transformed A27Mf.SPC -> A27MF.SPC
[Status 01:26:25 INFO] data for A27 transferred to science data processing
[Tidy 01:26:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:26:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:26:25 INFO] resetting WatchDogTimer
[Status 01:26:25 INFO] Starting Set [AERI set: name S27, 6 scans, 0 angle, D16300 command]
[Ingest 01:26:25 INFO] Sending XML status message
[Status 01:26:25 INFO] Mirror angle: 0
[Mirror 01:26:25 INFO] rotating to position S
[Status 01:26:26 INFO] .SET file for ACQ96 ready
[Ingest 01:26:27 INFO] Starting acquisition
[Status 01:26:27 INFO] reading housekeeping
[Status 01:26:45 INFO] acquire complete
[Status 01:26:45 INFO] writing housekeeping
[Sequencer 01:26:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:26:45 INFO] incremented S scene to 27 completed views
[Sequencer 01:26:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:26:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:26:45 INFO] incremented to [AERI set: name T27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:26:45 INFO] S27.SIG(18)
[sigmove 01:26:45 DEBUG] transformed S27Ma.SPC -> S27MA.SPC
[sigmove 01:26:45 DEBUG] transformed S27Mb.SPC -> S27MB.SPC
[sigmove 01:26:45 DEBUG] transformed S27Mc.SPC -> S27MC.SPC
[sigmove 01:26:45 DEBUG] transformed S27Md.SPC -> S27MD.SPC
[sigmove 01:26:45 DEBUG] transformed S27Me.SPC -> S27ME.SPC
[sigmove 01:26:45 DEBUG] transformed S27Mf.SPC -> S27MF.SPC
[Status 01:26:45 INFO] data for S27 transferred to science data processing
[Tidy 01:26:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:26:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:26:45 INFO] resetting WatchDogTimer
[Status 01:26:45 INFO] Starting Set [AERI set: name T27, 6 scans, 0 angle, D16300 command]
[Ingest 01:26:45 INFO] Sending XML status message
[Status 01:26:45 INFO] Mirror angle: 0
[Mirror 01:26:45 INFO] rotating to position T
[Status 01:26:46 INFO] .SET file for ACQ96 ready
[Ingest 01:26:46 INFO] Starting acquisition
[Status 01:26:46 INFO] reading housekeeping
[Status 01:27:04 INFO] acquire complete
[Status 01:27:04 INFO] writing housekeeping
[Sequencer 01:27:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:27:04 INFO] incremented T scene to 27 completed views
[Sequencer 01:27:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:27:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:27:04 INFO] incremented to [AERI set: name U27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:27:04 INFO] T27.SIG(18)
[sigmove 01:27:04 DEBUG] transformed T27Ma.SPC -> T27MA.SPC
[sigmove 01:27:04 DEBUG] transformed T27Mb.SPC -> T27MB.SPC
[sigmove 01:27:04 DEBUG] transformed T27Mc.SPC -> T27MC.SPC
[sigmove 01:27:04 DEBUG] transformed T27Md.SPC -> T27MD.SPC
[sigmove 01:27:04 DEBUG] transformed T27Me.SPC -> T27ME.SPC
[sigmove 01:27:04 DEBUG] transformed T27Mf.SPC -> T27MF.SPC
[Status 01:27:04 INFO] data for T27 transferred to science data processing
[Tidy 01:27:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:27:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:27:04 INFO] resetting WatchDogTimer
[Status 01:27:04 INFO] Starting Set [AERI set: name U27, 6 scans, 0 angle, D16300 command]
[Ingest 01:27:04 INFO] Sending XML status message
[Status 01:27:04 INFO] Mirror angle: 0
[Mirror 01:27:05 INFO] rotating to position U
[Status 01:27:05 INFO] .SET file for ACQ96 ready
[Ingest 01:27:05 INFO] Starting acquisition
[Status 01:27:05 INFO] reading housekeeping
[Status 01:27:23 INFO] acquire complete
[Status 01:27:23 INFO] writing housekeeping
[Sequencer 01:27:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:27:23 INFO] incremented U scene to 27 completed views
[Sequencer 01:27:23 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:27:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:27:23 INFO] incremented to [AERI set: name V27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:27:23 INFO] U27.SIG(18)
[sigmove 01:27:23 DEBUG] transformed U27Ma.SPC -> U27MA.SPC
[sigmove 01:27:23 DEBUG] transformed U27Mb.SPC -> U27MB.SPC
[sigmove 01:27:23 DEBUG] transformed U27Mc.SPC -> U27MC.SPC
[sigmove 01:27:23 DEBUG] transformed U27Md.SPC -> U27MD.SPC
[sigmove 01:27:23 DEBUG] transformed U27Me.SPC -> U27ME.SPC
[sigmove 01:27:23 DEBUG] transformed U27Mf.SPC -> U27MF.SPC
[Status 01:27:23 INFO] data for U27 transferred to science data processing
[Tidy 01:27:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:27:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:27:23 INFO] resetting WatchDogTimer
[Status 01:27:24 INFO] Starting Set [AERI set: name V27, 6 scans, 0 angle, D16300 command]
[Ingest 01:27:24 INFO] Sending XML status message
[Status 01:27:24 INFO] Mirror angle: 0
[Mirror 01:27:24 INFO] rotating to position V
[Status 01:27:24 INFO] .SET file for ACQ96 ready
[Ingest 01:27:24 INFO] Starting acquisition
[Status 01:27:24 INFO] reading housekeeping
[Status 01:27:42 INFO] acquire complete
[Status 01:27:43 INFO] writing housekeeping
[Sequencer 01:27:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:27:43 INFO] incremented V scene to 27 completed views
[Sequencer 01:27:43 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:27:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:27:43 INFO] incremented to [AERI set: name W27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:27:43 INFO] V27.SIG(18)
[sigmove 01:27:43 DEBUG] transformed V27Ma.SPC -> V27MA.SPC
[sigmove 01:27:43 DEBUG] transformed V27Mb.SPC -> V27MB.SPC
[sigmove 01:27:43 DEBUG] transformed V27Mc.SPC -> V27MC.SPC
[sigmove 01:27:43 DEBUG] transformed V27Md.SPC -> V27MD.SPC
[sigmove 01:27:43 DEBUG] transformed V27Me.SPC -> V27ME.SPC
[sigmove 01:27:43 DEBUG] transformed V27Mf.SPC -> V27MF.SPC
[Status 01:27:43 INFO] data for V27 transferred to science data processing
[Tidy 01:27:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:27:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:27:43 INFO] resetting WatchDogTimer
[Status 01:27:43 INFO] Starting Set [AERI set: name W27, 6 scans, 0 angle, D16300 command]
[Ingest 01:27:43 INFO] Sending XML status message
[Status 01:27:43 INFO] Mirror angle: 0
[Mirror 01:27:43 INFO] rotating to position W
[Status 01:27:43 INFO] .SET file for ACQ96 ready
[Ingest 01:27:43 INFO] Starting acquisition
[Status 01:27:43 INFO] reading housekeeping
[Status 01:28:01 INFO] acquire complete
[Status 01:28:02 INFO] writing housekeeping
[Sequencer 01:28:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:28:02 INFO] incremented W scene to 27 completed views
[Sequencer 01:28:02 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:28:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:28:02 INFO] incremented to [AERI set: name X27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:28:02 INFO] W27.SIG(18)
[sigmove 01:28:02 DEBUG] transformed W27Ma.SPC -> W27MA.SPC
[sigmove 01:28:02 DEBUG] transformed W27Mb.SPC -> W27MB.SPC
[sigmove 01:28:02 DEBUG] transformed W27Mc.SPC -> W27MC.SPC
[sigmove 01:28:02 DEBUG] transformed W27Md.SPC -> W27MD.SPC
[sigmove 01:28:02 DEBUG] transformed W27Me.SPC -> W27ME.SPC
[sigmove 01:28:02 DEBUG] transformed W27Mf.SPC -> W27MF.SPC
[Status 01:28:02 INFO] data for W27 transferred to science data processing
[Tidy 01:28:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:28:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:28:02 INFO] resetting WatchDogTimer
[Status 01:28:02 INFO] Starting Set [AERI set: name X27, 6 scans, 0 angle, D16300 command]
[Ingest 01:28:02 INFO] Sending XML status message
[Status 01:28:02 INFO] Mirror angle: 0
[Mirror 01:28:02 INFO] rotating to position X
[Status 01:28:02 INFO] .SET file for ACQ96 ready
[Ingest 01:28:02 INFO] Starting acquisition
[Status 01:28:02 INFO] reading housekeeping
[Status 01:28:20 INFO] acquire complete
[Status 01:28:21 INFO] writing housekeeping
[Sequencer 01:28:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:28:21 INFO] incremented X scene to 27 completed views
[Sequencer 01:28:21 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:28:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:28:21 INFO] incremented to [AERI set: name Y27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:28:21 INFO] X27.SIG(18)
[sigmove 01:28:21 DEBUG] transformed X27Ma.SPC -> X27MA.SPC
[sigmove 01:28:21 DEBUG] transformed X27Mb.SPC -> X27MB.SPC
[sigmove 01:28:21 DEBUG] transformed X27Mc.SPC -> X27MC.SPC
[sigmove 01:28:21 DEBUG] transformed X27Md.SPC -> X27MD.SPC
[sigmove 01:28:21 DEBUG] transformed X27Me.SPC -> X27ME.SPC
[sigmove 01:28:21 DEBUG] transformed X27Mf.SPC -> X27MF.SPC
[Status 01:28:21 INFO] data for X27 transferred to science data processing
[Tidy 01:28:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:28:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:28:21 INFO] resetting WatchDogTimer
[Status 01:28:21 INFO] Starting Set [AERI set: name Y27, 6 scans, 0 angle, D16300 command]
[Ingest 01:28:21 INFO] Sending XML status message
[Status 01:28:21 INFO] Mirror angle: 0
[Mirror 01:28:21 INFO] rotating to position Y
[Status 01:28:21 INFO] .SET file for ACQ96 ready
[Ingest 01:28:21 INFO] Starting acquisition
[Status 01:28:21 INFO] reading housekeeping
[Status 01:28:39 INFO] acquire complete
[Status 01:28:40 INFO] writing housekeeping
[Sequencer 01:28:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:28:40 INFO] incremented Y scene to 27 completed views
[Sequencer 01:28:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:28:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:28:40 INFO] incremented to [AERI set: name Z27, 6 scans, 0 angle, D16300 command] set
[sigmove 01:28:40 INFO] Y27.SIG(18)
[sigmove 01:28:40 DEBUG] transformed Y27Ma.SPC -> Y27MA.SPC
[sigmove 01:28:40 DEBUG] transformed Y27Mb.SPC -> Y27MB.SPC
[sigmove 01:28:40 DEBUG] transformed Y27Mc.SPC -> Y27MC.SPC
[sigmove 01:28:40 DEBUG] transformed Y27Md.SPC -> Y27MD.SPC
[sigmove 01:28:40 DEBUG] transformed Y27Me.SPC -> Y27ME.SPC
[sigmove 01:28:40 DEBUG] transformed Y27Mf.SPC -> Y27MF.SPC
[Status 01:28:40 INFO] data for Y27 transferred to science data processing
[Tidy 01:28:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:28:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:28:40 INFO] resetting WatchDogTimer
[Status 01:28:40 INFO] Starting Set [AERI set: name Z27, 6 scans, 0 angle, D16300 command]
[Ingest 01:28:40 INFO] Sending XML status message
[Status 01:28:40 INFO] Mirror angle: 0
[Mirror 01:28:40 INFO] rotating to position Z
[Status 01:28:40 INFO] .SET file for ACQ96 ready
[Ingest 01:28:40 INFO] Starting acquisition
[Status 01:28:40 INFO] reading housekeeping
[Status 01:28:59 INFO] acquire complete
[Status 01:28:59 INFO] writing housekeeping
[Sequencer 01:28:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:28:59 INFO] incremented Z scene to 27 completed views
[Sequencer 01:28:59 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:28:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:28:59 INFO] incremented to [AERI set: name A28, 6 scans, 120 angle, D28300 command] set
[sigmove 01:28:59 INFO] Z27.SIG(18)
[sigmove 01:28:59 DEBUG] transformed Z27Ma.SPC -> Z27MA.SPC
[sigmove 01:28:59 DEBUG] transformed Z27Mb.SPC -> Z27MB.SPC
[sigmove 01:28:59 DEBUG] transformed Z27Mc.SPC -> Z27MC.SPC
[sigmove 01:28:59 DEBUG] transformed Z27Md.SPC -> Z27MD.SPC
[sigmove 01:28:59 DEBUG] transformed Z27Me.SPC -> Z27ME.SPC
[sigmove 01:28:59 DEBUG] transformed Z27Mf.SPC -> Z27MF.SPC
[Status 01:28:59 INFO] data for Z27 transferred to science data processing
[Tidy 01:28:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:28:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:28:59 INFO] resetting WatchDogTimer
[Status 01:28:59 INFO] Starting Set [AERI set: name A28, 6 scans, 120 angle, D28300 command]
[Ingest 01:28:59 INFO] Sending XML status message
[Status 01:28:59 INFO] Mirror angle: 120
[Mirror 01:28:59 INFO] rotating to position A
[Status 01:29:00 INFO] .SET file for ACQ96 ready
[Ingest 01:29:00 INFO] Starting acquisition
[Status 01:29:00 INFO] reading housekeeping
[Status 01:29:19 INFO] acquire complete
[Status 01:29:19 INFO] writing housekeeping
[Sequencer 01:29:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:29:19 INFO] incremented A scene to 28 completed views
[Sequencer 01:29:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:29:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:29:19 INFO] incremented to [AERI set: name H28, 6 scans, 60 angle, D22500 command] set
[sigmove 01:29:19 INFO] A28.SIG(18)
[sigmove 01:29:19 DEBUG] transformed A28Ma.SPC -> A28MA.SPC
[sigmove 01:29:19 DEBUG] transformed A28Mb.SPC -> A28MB.SPC
[sigmove 01:29:19 DEBUG] transformed A28Mc.SPC -> A28MC.SPC
[sigmove 01:29:19 DEBUG] transformed A28Md.SPC -> A28MD.SPC
[sigmove 01:29:19 DEBUG] transformed A28Me.SPC -> A28ME.SPC
[sigmove 01:29:19 DEBUG] transformed A28Mf.SPC -> A28MF.SPC
[Status 01:29:19 INFO] data for A28 transferred to science data processing
[Tidy 01:29:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:29:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:29:19 INFO] resetting WatchDogTimer
[Status 01:29:19 INFO] Starting Set [AERI set: name H28, 6 scans, 60 angle, D22500 command]
[Ingest 01:29:19 INFO] Sending XML status message
[Status 01:29:19 INFO] Mirror angle: 60
[Mirror 01:29:19 INFO] rotating to position H
[Status 01:29:20 INFO] .SET file for ACQ96 ready
[Ingest 01:29:20 INFO] Starting acquisition
[Status 01:29:20 INFO] reading housekeeping
[Status 01:29:38 INFO] acquire complete
[Status 01:29:38 INFO] writing housekeeping
[Sequencer 01:29:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:29:38 INFO] incremented H scene to 28 completed views
[Sequencer 01:29:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:29:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:29:38 INFO] incremented to [AERI set: name S28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:29:38 INFO] H28.SIG(18)
[sigmove 01:29:38 DEBUG] transformed H28Ma.SPC -> H28MA.SPC
[sigmove 01:29:38 DEBUG] transformed H28Mb.SPC -> H28MB.SPC
[sigmove 01:29:38 DEBUG] transformed H28Mc.SPC -> H28MC.SPC
[sigmove 01:29:38 DEBUG] transformed H28Md.SPC -> H28MD.SPC
[sigmove 01:29:38 DEBUG] transformed H28Me.SPC -> H28ME.SPC
[sigmove 01:29:38 DEBUG] transformed H28Mf.SPC -> H28MF.SPC
[Status 01:29:38 INFO] data for H28 transferred to science data processing
[Tidy 01:29:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:29:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:29:38 INFO] resetting WatchDogTimer
[Status 01:29:38 INFO] Starting Set [AERI set: name S28, 6 scans, 0 angle, D16300 command]
[Ingest 01:29:38 INFO] Sending XML status message
[Status 01:29:38 INFO] Mirror angle: 0
[Mirror 01:29:38 INFO] rotating to position S
[Status 01:29:39 INFO] .SET file for ACQ96 ready
[Ingest 01:29:39 INFO] Starting acquisition
[Status 01:29:39 INFO] reading housekeeping
[Status 01:29:57 INFO] acquire complete
[Status 01:29:57 INFO] writing housekeeping
[Sequencer 01:29:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:29:57 INFO] incremented S scene to 28 completed views
[Sequencer 01:29:57 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:29:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:29:57 INFO] incremented to [AERI set: name T28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:29:57 INFO] S28.SIG(18)
[sigmove 01:29:57 DEBUG] transformed S28Ma.SPC -> S28MA.SPC
[sigmove 01:29:57 DEBUG] transformed S28Mb.SPC -> S28MB.SPC
[sigmove 01:29:57 DEBUG] transformed S28Mc.SPC -> S28MC.SPC
[sigmove 01:29:57 DEBUG] transformed S28Md.SPC -> S28MD.SPC
[sigmove 01:29:57 DEBUG] transformed S28Me.SPC -> S28ME.SPC
[sigmove 01:29:57 DEBUG] transformed S28Mf.SPC -> S28MF.SPC
[Status 01:29:57 INFO] data for S28 transferred to science data processing
[Tidy 01:29:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:29:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:29:57 INFO] resetting WatchDogTimer
[Status 01:29:57 INFO] Starting Set [AERI set: name T28, 6 scans, 0 angle, D16300 command]
[Ingest 01:29:57 INFO] Sending XML status message
[Status 01:29:57 INFO] Mirror angle: 0
[Mirror 01:29:57 INFO] rotating to position T
[Status 01:29:58 INFO] .SET file for ACQ96 ready
[Ingest 01:29:58 INFO] Starting acquisition
[Status 01:29:58 INFO] reading housekeeping
[Status 01:30:16 INFO] acquire complete
[Status 01:30:16 INFO] writing housekeeping
[Sequencer 01:30:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:30:16 INFO] incremented T scene to 28 completed views
[Sequencer 01:30:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:30:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:30:16 INFO] incremented to [AERI set: name U28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:30:16 INFO] T28.SIG(18)
[sigmove 01:30:16 DEBUG] transformed T28Ma.SPC -> T28MA.SPC
[sigmove 01:30:16 DEBUG] transformed T28Mb.SPC -> T28MB.SPC
[sigmove 01:30:16 DEBUG] transformed T28Mc.SPC -> T28MC.SPC
[sigmove 01:30:17 DEBUG] transformed T28Md.SPC -> T28MD.SPC
[sigmove 01:30:17 DEBUG] transformed T28Me.SPC -> T28ME.SPC
[sigmove 01:30:17 DEBUG] transformed T28Mf.SPC -> T28MF.SPC
[Status 01:30:17 INFO] data for T28 transferred to science data processing
[Tidy 01:30:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:30:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:30:17 INFO] resetting WatchDogTimer
[Status 01:30:17 INFO] Starting Set [AERI set: name U28, 6 scans, 0 angle, D16300 command]
[Ingest 01:30:17 INFO] Sending XML status message
[Status 01:30:17 INFO] Mirror angle: 0
[Mirror 01:30:17 INFO] rotating to position U
[Status 01:30:17 INFO] .SET file for ACQ96 ready
[Ingest 01:30:17 INFO] Starting acquisition
[Status 01:30:17 INFO] reading housekeeping
[Status 01:30:35 INFO] acquire complete
[Status 01:30:35 INFO] writing housekeeping
[Sequencer 01:30:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:30:35 INFO] incremented U scene to 28 completed views
[Sequencer 01:30:35 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:30:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:30:35 INFO] incremented to [AERI set: name V28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:30:35 INFO] U28.SIG(18)
[sigmove 01:30:35 DEBUG] transformed U28Ma.SPC -> U28MA.SPC
[sigmove 01:30:35 DEBUG] transformed U28Mb.SPC -> U28MB.SPC
[sigmove 01:30:35 DEBUG] transformed U28Mc.SPC -> U28MC.SPC
[sigmove 01:30:35 DEBUG] transformed U28Md.SPC -> U28MD.SPC
[sigmove 01:30:35 DEBUG] transformed U28Me.SPC -> U28ME.SPC
[sigmove 01:30:35 DEBUG] transformed U28Mf.SPC -> U28MF.SPC
[Status 01:30:35 INFO] data for U28 transferred to science data processing
[Tidy 01:30:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:30:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:30:35 INFO] resetting WatchDogTimer
[Status 01:30:36 INFO] Starting Set [AERI set: name V28, 6 scans, 0 angle, D16300 command]
[Ingest 01:30:36 INFO] Sending XML status message
[Status 01:30:36 INFO] Mirror angle: 0
[Mirror 01:30:36 INFO] rotating to position V
[Status 01:30:36 INFO] .SET file for ACQ96 ready
[Ingest 01:30:36 INFO] Starting acquisition
[Status 01:30:36 INFO] reading housekeeping
[Status 01:30:54 INFO] acquire complete
[Status 01:30:54 INFO] writing housekeeping
[Sequencer 01:30:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:30:54 INFO] incremented V scene to 28 completed views
[Sequencer 01:30:54 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:30:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:30:55 INFO] incremented to [AERI set: name W28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:30:55 INFO] V28.SIG(18)
[sigmove 01:30:55 DEBUG] transformed V28Ma.SPC -> V28MA.SPC
[sigmove 01:30:55 DEBUG] transformed V28Mb.SPC -> V28MB.SPC
[sigmove 01:30:55 DEBUG] transformed V28Mc.SPC -> V28MC.SPC
[sigmove 01:30:55 DEBUG] transformed V28Md.SPC -> V28MD.SPC
[sigmove 01:30:55 DEBUG] transformed V28Me.SPC -> V28ME.SPC
[sigmove 01:30:55 DEBUG] transformed V28Mf.SPC -> V28MF.SPC
[Status 01:30:55 INFO] data for V28 transferred to science data processing
[Tidy 01:30:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:30:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:30:55 INFO] resetting WatchDogTimer
[Status 01:30:55 INFO] Starting Set [AERI set: name W28, 6 scans, 0 angle, D16300 command]
[Ingest 01:30:55 INFO] Sending XML status message
[Status 01:30:55 INFO] Mirror angle: 0
[Mirror 01:30:55 INFO] rotating to position W
[Status 01:30:55 INFO] .SET file for ACQ96 ready
[Ingest 01:30:55 INFO] Starting acquisition
[Status 01:30:55 INFO] reading housekeeping
[Status 01:31:13 INFO] acquire complete
[Status 01:31:14 INFO] writing housekeeping
[Sequencer 01:31:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:31:14 INFO] incremented W scene to 28 completed views
[Sequencer 01:31:14 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:31:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:31:14 INFO] incremented to [AERI set: name X28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:31:14 INFO] W28.SIG(18)
[sigmove 01:31:14 DEBUG] transformed W28Ma.SPC -> W28MA.SPC
[sigmove 01:31:14 DEBUG] transformed W28Mb.SPC -> W28MB.SPC
[sigmove 01:31:14 DEBUG] transformed W28Mc.SPC -> W28MC.SPC
[sigmove 01:31:14 DEBUG] transformed W28Md.SPC -> W28MD.SPC
[sigmove 01:31:14 DEBUG] transformed W28Me.SPC -> W28ME.SPC
[sigmove 01:31:14 DEBUG] transformed W28Mf.SPC -> W28MF.SPC
[Status 01:31:14 INFO] data for W28 transferred to science data processing
[Tidy 01:31:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:31:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:31:14 INFO] resetting WatchDogTimer
[Status 01:31:14 INFO] Starting Set [AERI set: name X28, 6 scans, 0 angle, D16300 command]
[Ingest 01:31:14 INFO] Sending XML status message
[Status 01:31:14 INFO] Mirror angle: 0
[Mirror 01:31:14 INFO] rotating to position X
[Status 01:31:14 INFO] .SET file for ACQ96 ready
[Ingest 01:31:14 INFO] Starting acquisition
[Status 01:31:14 INFO] reading housekeeping
[Status 01:31:32 INFO] acquire complete
[Status 01:31:33 INFO] writing housekeeping
[Sequencer 01:31:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:31:33 INFO] incremented X scene to 28 completed views
[Sequencer 01:31:33 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:31:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:31:33 INFO] incremented to [AERI set: name Y28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:31:33 INFO] X28.SIG(18)
[sigmove 01:31:33 DEBUG] transformed X28Ma.SPC -> X28MA.SPC
[sigmove 01:31:33 DEBUG] transformed X28Mb.SPC -> X28MB.SPC
[sigmove 01:31:33 DEBUG] transformed X28Mc.SPC -> X28MC.SPC
[sigmove 01:31:33 DEBUG] transformed X28Md.SPC -> X28MD.SPC
[sigmove 01:31:33 DEBUG] transformed X28Me.SPC -> X28ME.SPC
[sigmove 01:31:33 DEBUG] transformed X28Mf.SPC -> X28MF.SPC
[Status 01:31:33 INFO] data for X28 transferred to science data processing
[Tidy 01:31:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:31:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:31:33 INFO] resetting WatchDogTimer
[Status 01:31:33 INFO] Starting Set [AERI set: name Y28, 6 scans, 0 angle, D16300 command]
[Ingest 01:31:33 INFO] Sending XML status message
[Status 01:31:33 INFO] Mirror angle: 0
[Mirror 01:31:33 INFO] rotating to position Y
[Status 01:31:33 INFO] .SET file for ACQ96 ready
[Ingest 01:31:33 INFO] Starting acquisition
[Status 01:31:33 INFO] reading housekeeping
[Status 01:31:51 INFO] acquire complete
[Status 01:31:52 INFO] writing housekeeping
[Sequencer 01:31:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:31:52 INFO] incremented Y scene to 28 completed views
[Sequencer 01:31:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:31:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:31:52 INFO] incremented to [AERI set: name Z28, 6 scans, 0 angle, D16300 command] set
[sigmove 01:31:52 INFO] Y28.SIG(18)
[sigmove 01:31:52 DEBUG] transformed Y28Ma.SPC -> Y28MA.SPC
[sigmove 01:31:52 DEBUG] transformed Y28Mb.SPC -> Y28MB.SPC
[sigmove 01:31:52 DEBUG] transformed Y28Mc.SPC -> Y28MC.SPC
[sigmove 01:31:52 DEBUG] transformed Y28Md.SPC -> Y28MD.SPC
[sigmove 01:31:52 DEBUG] transformed Y28Me.SPC -> Y28ME.SPC
[sigmove 01:31:52 DEBUG] transformed Y28Mf.SPC -> Y28MF.SPC
[Status 01:31:52 INFO] data for Y28 transferred to science data processing
[Tidy 01:31:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:31:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:31:52 INFO] resetting WatchDogTimer
[Status 01:31:52 INFO] Starting Set [AERI set: name Z28, 6 scans, 0 angle, D16300 command]
[Ingest 01:31:52 INFO] Sending XML status message
[Status 01:31:52 INFO] Mirror angle: 0
[Mirror 01:31:52 INFO] rotating to position Z
[Status 01:31:52 INFO] .SET file for ACQ96 ready
[Ingest 01:31:52 INFO] Starting acquisition
[Status 01:31:52 INFO] reading housekeeping
[Status 01:32:11 INFO] acquire complete
[Status 01:32:11 INFO] writing housekeeping
[Sequencer 01:32:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:32:11 INFO] incremented Z scene to 28 completed views
[Sequencer 01:32:11 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:32:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:32:11 INFO] incremented to [AERI set: name H29, 6 scans, 60 angle, D22500 command] set
[sigmove 01:32:11 INFO] Z28.SIG(18)
[sigmove 01:32:11 DEBUG] transformed Z28Ma.SPC -> Z28MA.SPC
[sigmove 01:32:11 DEBUG] transformed Z28Mb.SPC -> Z28MB.SPC
[sigmove 01:32:11 DEBUG] transformed Z28Mc.SPC -> Z28MC.SPC
[sigmove 01:32:11 DEBUG] transformed Z28Md.SPC -> Z28MD.SPC
[sigmove 01:32:11 DEBUG] transformed Z28Me.SPC -> Z28ME.SPC
[sigmove 01:32:11 DEBUG] transformed Z28Mf.SPC -> Z28MF.SPC
[Status 01:32:11 INFO] data for Z28 transferred to science data processing
[Tidy 01:32:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:32:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:32:11 INFO] resetting WatchDogTimer
[Status 01:32:11 INFO] Starting Set [AERI set: name H29, 6 scans, 60 angle, D22500 command]
[Ingest 01:32:11 INFO] Sending XML status message
[Status 01:32:11 INFO] Mirror angle: 60
[Mirror 01:32:11 INFO] rotating to position H
[Status 01:32:12 INFO] .SET file for ACQ96 ready
[Ingest 01:32:12 INFO] Starting acquisition
[Status 01:32:12 INFO] reading housekeeping
[Status 01:32:30 INFO] acquire complete
[Status 01:32:30 INFO] writing housekeeping
[Sequencer 01:32:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:32:30 INFO] incremented H scene to 29 completed views
[Sequencer 01:32:30 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:32:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:32:30 INFO] incremented to [AERI set: name A29, 6 scans, 120 angle, D28300 command] set
[sigmove 01:32:30 INFO] H29.SIG(18)
[sigmove 01:32:30 DEBUG] transformed H29Ma.SPC -> H29MA.SPC
[sigmove 01:32:30 DEBUG] transformed H29Mb.SPC -> H29MB.SPC
[sigmove 01:32:30 DEBUG] transformed H29Mc.SPC -> H29MC.SPC
[sigmove 01:32:30 DEBUG] transformed H29Md.SPC -> H29MD.SPC
[sigmove 01:32:30 DEBUG] transformed H29Me.SPC -> H29ME.SPC
[sigmove 01:32:30 DEBUG] transformed H29Mf.SPC -> H29MF.SPC
[Status 01:32:30 INFO] data for H29 transferred to science data processing
[Tidy 01:32:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:32:30 INFO] A27.FIN(19),H27.FIN(19),S27.FIN(19),T27.FIN(19),U27.FIN(19),V27.FIN(19),W27.FIN(19),X27.FIN(19),Y27.FIN(19),Z27.FIN(19),A28.FIN(19),H28.FIN(19),S28.FIN(19),T28.FIN(19),U28.FIN(19),V28.FIN(19),W28.FIN(19),X28.FIN(19),Y28.FIN(19),Z28.FIN(19)
[sigmove 01:32:30 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:32:30 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:32:31 DEBUG] done zipping
[WatchDog 01:32:31 INFO] resetting WatchDogTimer
[Status 01:32:31 INFO] Starting Set [AERI set: name A29, 6 scans, 120 angle, D28300 command]
[Ingest 01:32:31 INFO] Sending XML status message
[Status 01:32:31 INFO] Mirror angle: 120
[Mirror 01:32:31 INFO] rotating to position A
[Status 01:32:32 INFO] .SET file for ACQ96 ready
[Ingest 01:32:32 INFO] Starting acquisition
[Status 01:32:32 INFO] reading housekeeping
[Status 01:32:50 INFO] acquire complete
[Status 01:32:50 INFO] writing housekeeping
[Sequencer 01:32:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:32:50 INFO] incremented A scene to 29 completed views
[Sequencer 01:32:50 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:32:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:32:50 INFO] incremented to [AERI set: name S29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:32:50 INFO] A29.SIG(18)
[sigmove 01:32:50 DEBUG] transformed A29Ma.SPC -> A29MA.SPC
[sigmove 01:32:50 DEBUG] transformed A29Mb.SPC -> A29MB.SPC
[sigmove 01:32:50 DEBUG] transformed A29Mc.SPC -> A29MC.SPC
[sigmove 01:32:50 DEBUG] transformed A29Md.SPC -> A29MD.SPC
[sigmove 01:32:50 DEBUG] transformed A29Me.SPC -> A29ME.SPC
[sigmove 01:32:50 DEBUG] transformed A29Mf.SPC -> A29MF.SPC
[Status 01:32:50 INFO] data for A29 transferred to science data processing
[Tidy 01:32:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:32:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:32:50 INFO] resetting WatchDogTimer
[Status 01:32:50 INFO] Starting Set [AERI set: name S29, 6 scans, 0 angle, D16300 command]
[Ingest 01:32:50 INFO] Sending XML status message
[Status 01:32:50 INFO] Mirror angle: 0
[Mirror 01:32:50 INFO] rotating to position S
[Status 01:32:52 INFO] .SET file for ACQ96 ready
[Ingest 01:32:52 INFO] Starting acquisition
[Status 01:32:52 INFO] reading housekeeping
[Status 01:33:10 INFO] acquire complete
[Status 01:33:10 INFO] writing housekeeping
[Sequencer 01:33:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:33:10 INFO] incremented S scene to 29 completed views
[Sequencer 01:33:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:33:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:33:10 INFO] incremented to [AERI set: name T29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:33:10 INFO] S29.SIG(18)
[sigmove 01:33:10 DEBUG] transformed S29Ma.SPC -> S29MA.SPC
[sigmove 01:33:10 DEBUG] transformed S29Mb.SPC -> S29MB.SPC
[sigmove 01:33:10 DEBUG] transformed S29Mc.SPC -> S29MC.SPC
[sigmove 01:33:10 DEBUG] transformed S29Md.SPC -> S29MD.SPC
[sigmove 01:33:10 DEBUG] transformed S29Me.SPC -> S29ME.SPC
[sigmove 01:33:10 DEBUG] transformed S29Mf.SPC -> S29MF.SPC
[Status 01:33:10 INFO] data for S29 transferred to science data processing
[Tidy 01:33:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:33:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:33:10 INFO] resetting WatchDogTimer
[Status 01:33:10 INFO] Starting Set [AERI set: name T29, 6 scans, 0 angle, D16300 command]
[Ingest 01:33:10 INFO] Sending XML status message
[Status 01:33:10 INFO] Mirror angle: 0
[Mirror 01:33:11 INFO] rotating to position T
[Status 01:33:11 INFO] .SET file for ACQ96 ready
[Ingest 01:33:11 INFO] Starting acquisition
[Status 01:33:11 INFO] reading housekeeping
[Status 01:33:29 INFO] acquire complete
[Status 01:33:29 INFO] writing housekeeping
[Sequencer 01:33:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:33:29 INFO] incremented T scene to 29 completed views
[Sequencer 01:33:29 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:33:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:33:29 INFO] incremented to [AERI set: name U29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:33:29 INFO] T29.SIG(18)
[sigmove 01:33:29 DEBUG] transformed T29Ma.SPC -> T29MA.SPC
[sigmove 01:33:29 DEBUG] transformed T29Mb.SPC -> T29MB.SPC
[sigmove 01:33:29 DEBUG] transformed T29Mc.SPC -> T29MC.SPC
[sigmove 01:33:29 DEBUG] transformed T29Md.SPC -> T29MD.SPC
[sigmove 01:33:29 DEBUG] transformed T29Me.SPC -> T29ME.SPC
[sigmove 01:33:29 DEBUG] transformed T29Mf.SPC -> T29MF.SPC
[Status 01:33:29 INFO] data for T29 transferred to science data processing
[Tidy 01:33:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:33:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:33:29 INFO] resetting WatchDogTimer
[Status 01:33:30 INFO] Starting Set [AERI set: name U29, 6 scans, 0 angle, D16300 command]
[Ingest 01:33:30 INFO] Sending XML status message
[Status 01:33:30 INFO] Mirror angle: 0
[Mirror 01:33:30 INFO] rotating to position U
[Status 01:33:30 INFO] .SET file for ACQ96 ready
[Ingest 01:33:30 INFO] Starting acquisition
[Status 01:33:30 INFO] reading housekeeping
[Status 01:33:48 INFO] acquire complete
[Status 01:33:49 INFO] writing housekeeping
[Sequencer 01:33:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:33:49 INFO] incremented U scene to 29 completed views
[Sequencer 01:33:49 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:33:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:33:49 INFO] incremented to [AERI set: name V29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:33:49 INFO] U29.SIG(18)
[sigmove 01:33:49 DEBUG] transformed U29Ma.SPC -> U29MA.SPC
[sigmove 01:33:49 DEBUG] transformed U29Mb.SPC -> U29MB.SPC
[sigmove 01:33:49 DEBUG] transformed U29Mc.SPC -> U29MC.SPC
[sigmove 01:33:49 DEBUG] transformed U29Md.SPC -> U29MD.SPC
[sigmove 01:33:49 DEBUG] transformed U29Me.SPC -> U29ME.SPC
[sigmove 01:33:49 DEBUG] transformed U29Mf.SPC -> U29MF.SPC
[Status 01:33:49 INFO] data for U29 transferred to science data processing
[Tidy 01:33:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:33:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:33:49 INFO] resetting WatchDogTimer
[Status 01:33:49 INFO] Starting Set [AERI set: name V29, 6 scans, 0 angle, D16300 command]
[Ingest 01:33:49 INFO] Sending XML status message
[Status 01:33:49 INFO] Mirror angle: 0
[Mirror 01:33:49 INFO] rotating to position V
[Status 01:33:49 INFO] .SET file for ACQ96 ready
[Ingest 01:33:49 INFO] Starting acquisition
[Status 01:33:49 INFO] reading housekeeping
[Status 01:34:07 INFO] acquire complete
[Status 01:34:08 INFO] writing housekeeping
[Sequencer 01:34:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:34:08 INFO] incremented V scene to 29 completed views
[Sequencer 01:34:08 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:34:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:34:08 INFO] incremented to [AERI set: name W29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:34:08 INFO] V29.SIG(18)
[sigmove 01:34:08 DEBUG] transformed V29Ma.SPC -> V29MA.SPC
[sigmove 01:34:08 DEBUG] transformed V29Mb.SPC -> V29MB.SPC
[sigmove 01:34:08 DEBUG] transformed V29Mc.SPC -> V29MC.SPC
[sigmove 01:34:08 DEBUG] transformed V29Md.SPC -> V29MD.SPC
[sigmove 01:34:08 DEBUG] transformed V29Me.SPC -> V29ME.SPC
[sigmove 01:34:08 DEBUG] transformed V29Mf.SPC -> V29MF.SPC
[Status 01:34:08 INFO] data for V29 transferred to science data processing
[Tidy 01:34:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:34:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:34:08 INFO] resetting WatchDogTimer
[Status 01:34:08 INFO] Starting Set [AERI set: name W29, 6 scans, 0 angle, D16300 command]
[Ingest 01:34:08 INFO] Sending XML status message
[Status 01:34:08 INFO] Mirror angle: 0
[Mirror 01:34:08 INFO] rotating to position W
[Status 01:34:08 INFO] .SET file for ACQ96 ready
[Ingest 01:34:08 INFO] Starting acquisition
[Status 01:34:08 INFO] reading housekeeping
[Status 01:34:26 INFO] acquire complete
[Status 01:34:27 INFO] writing housekeeping
[Sequencer 01:34:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:34:27 INFO] incremented W scene to 29 completed views
[Sequencer 01:34:27 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:34:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:34:27 INFO] incremented to [AERI set: name X29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:34:27 INFO] W29.SIG(18)
[sigmove 01:34:27 DEBUG] transformed W29Ma.SPC -> W29MA.SPC
[sigmove 01:34:27 DEBUG] transformed W29Mb.SPC -> W29MB.SPC
[sigmove 01:34:27 DEBUG] transformed W29Mc.SPC -> W29MC.SPC
[sigmove 01:34:27 DEBUG] transformed W29Md.SPC -> W29MD.SPC
[sigmove 01:34:27 DEBUG] transformed W29Me.SPC -> W29ME.SPC
[sigmove 01:34:27 DEBUG] transformed W29Mf.SPC -> W29MF.SPC
[Status 01:34:27 INFO] data for W29 transferred to science data processing
[Tidy 01:34:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:34:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:34:27 INFO] resetting WatchDogTimer
[Status 01:34:27 INFO] Starting Set [AERI set: name X29, 6 scans, 0 angle, D16300 command]
[Ingest 01:34:27 INFO] Sending XML status message
[Status 01:34:27 INFO] Mirror angle: 0
[Mirror 01:34:27 INFO] rotating to position X
[Status 01:34:27 INFO] .SET file for ACQ96 ready
[Ingest 01:34:27 INFO] Starting acquisition
[Status 01:34:27 INFO] reading housekeeping
[Status 01:34:45 INFO] acquire complete
[Status 01:34:46 INFO] writing housekeeping
[Sequencer 01:34:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:34:46 INFO] incremented X scene to 29 completed views
[Sequencer 01:34:46 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:34:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:34:46 INFO] incremented to [AERI set: name Y29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:34:46 INFO] X29.SIG(18)
[sigmove 01:34:46 DEBUG] transformed X29Ma.SPC -> X29MA.SPC
[sigmove 01:34:46 DEBUG] transformed X29Mb.SPC -> X29MB.SPC
[sigmove 01:34:46 DEBUG] transformed X29Mc.SPC -> X29MC.SPC
[sigmove 01:34:46 DEBUG] transformed X29Md.SPC -> X29MD.SPC
[sigmove 01:34:46 DEBUG] transformed X29Me.SPC -> X29ME.SPC
[sigmove 01:34:46 DEBUG] transformed X29Mf.SPC -> X29MF.SPC
[Status 01:34:46 INFO] data for X29 transferred to science data processing
[Tidy 01:34:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:34:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:34:46 INFO] resetting WatchDogTimer
[Status 01:34:46 INFO] Starting Set [AERI set: name Y29, 6 scans, 0 angle, D16300 command]
[Ingest 01:34:46 INFO] Sending XML status message
[Status 01:34:46 INFO] Mirror angle: 0
[Mirror 01:34:46 INFO] rotating to position Y
[Status 01:34:46 INFO] .SET file for ACQ96 ready
[Ingest 01:34:46 INFO] Starting acquisition
[Status 01:34:46 INFO] reading housekeeping
[Status 01:35:05 INFO] acquire complete
[Status 01:35:05 INFO] writing housekeeping
[Sequencer 01:35:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:35:05 INFO] incremented Y scene to 29 completed views
[Sequencer 01:35:05 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:35:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:35:05 INFO] incremented to [AERI set: name Z29, 6 scans, 0 angle, D16300 command] set
[sigmove 01:35:05 INFO] Y29.SIG(18)
[sigmove 01:35:05 DEBUG] transformed Y29Ma.SPC -> Y29MA.SPC
[sigmove 01:35:05 DEBUG] transformed Y29Mb.SPC -> Y29MB.SPC
[sigmove 01:35:05 DEBUG] transformed Y29Mc.SPC -> Y29MC.SPC
[sigmove 01:35:05 DEBUG] transformed Y29Md.SPC -> Y29MD.SPC
[sigmove 01:35:05 DEBUG] transformed Y29Me.SPC -> Y29ME.SPC
[sigmove 01:35:05 DEBUG] transformed Y29Mf.SPC -> Y29MF.SPC
[Status 01:35:05 INFO] data for Y29 transferred to science data processing
[Tidy 01:35:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:35:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:35:05 INFO] resetting WatchDogTimer
[Status 01:35:05 INFO] Starting Set [AERI set: name Z29, 6 scans, 0 angle, D16300 command]
[Ingest 01:35:05 INFO] Sending XML status message
[Status 01:35:05 INFO] Mirror angle: 0
[Mirror 01:35:05 INFO] rotating to position Z
[Status 01:35:05 INFO] .SET file for ACQ96 ready
[Ingest 01:35:05 INFO] Starting acquisition
[Status 01:35:05 INFO] reading housekeeping
[Status 01:35:24 INFO] acquire complete
[Status 01:35:24 INFO] writing housekeeping
[Sequencer 01:35:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:35:24 INFO] incremented Z scene to 29 completed views
[Sequencer 01:35:24 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:35:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:35:24 INFO] incremented to [AERI set: name A30, 6 scans, 120 angle, D28300 command] set
[sigmove 01:35:24 INFO] Z29.SIG(18)
[sigmove 01:35:24 DEBUG] transformed Z29Ma.SPC -> Z29MA.SPC
[sigmove 01:35:24 DEBUG] transformed Z29Mb.SPC -> Z29MB.SPC
[sigmove 01:35:24 DEBUG] transformed Z29Mc.SPC -> Z29MC.SPC
[sigmove 01:35:24 DEBUG] transformed Z29Md.SPC -> Z29MD.SPC
[sigmove 01:35:24 DEBUG] transformed Z29Me.SPC -> Z29ME.SPC
[sigmove 01:35:24 DEBUG] transformed Z29Mf.SPC -> Z29MF.SPC
[Status 01:35:24 INFO] data for Z29 transferred to science data processing
[Tidy 01:35:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:35:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:35:24 INFO] resetting WatchDogTimer
[Status 01:35:24 INFO] Starting Set [AERI set: name A30, 6 scans, 120 angle, D28300 command]
[Ingest 01:35:24 INFO] Sending XML status message
[Status 01:35:24 INFO] Mirror angle: 120
[Mirror 01:35:24 INFO] rotating to position A
[Status 01:35:25 INFO] .SET file for ACQ96 ready
[Ingest 01:35:25 INFO] Starting acquisition
[Status 01:35:26 INFO] reading housekeeping
[Status 01:35:44 INFO] acquire complete
[Status 01:35:44 INFO] writing housekeeping
[Sequencer 01:35:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:35:44 INFO] incremented A scene to 30 completed views
[Sequencer 01:35:44 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:35:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:35:44 INFO] incremented to [AERI set: name H30, 6 scans, 60 angle, D22500 command] set
[sigmove 01:35:44 INFO] A30.SIG(18)
[sigmove 01:35:44 DEBUG] transformed A30Ma.SPC -> A30MA.SPC
[sigmove 01:35:44 DEBUG] transformed A30Mb.SPC -> A30MB.SPC
[sigmove 01:35:44 DEBUG] transformed A30Mc.SPC -> A30MC.SPC
[sigmove 01:35:44 DEBUG] transformed A30Md.SPC -> A30MD.SPC
[sigmove 01:35:44 DEBUG] transformed A30Me.SPC -> A30ME.SPC
[sigmove 01:35:44 DEBUG] transformed A30Mf.SPC -> A30MF.SPC
[Status 01:35:44 INFO] data for A30 transferred to science data processing
[Tidy 01:35:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:35:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:35:44 INFO] resetting WatchDogTimer
[Status 01:35:44 INFO] Starting Set [AERI set: name H30, 6 scans, 60 angle, D22500 command]
[Ingest 01:35:44 INFO] Sending XML status message
[Status 01:35:44 INFO] Mirror angle: 60
[Mirror 01:35:44 INFO] rotating to position H
[Status 01:35:45 INFO] .SET file for ACQ96 ready
[Ingest 01:35:45 INFO] Starting acquisition
[Status 01:35:45 INFO] reading housekeeping
[Status 01:36:03 INFO] acquire complete
[Status 01:36:03 INFO] writing housekeeping
[Sequencer 01:36:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:36:03 INFO] incremented H scene to 30 completed views
[Sequencer 01:36:03 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:36:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:36:03 INFO] incremented to [AERI set: name S30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:36:03 INFO] H30.SIG(18)
[sigmove 01:36:03 DEBUG] transformed H30Ma.SPC -> H30MA.SPC
[sigmove 01:36:03 DEBUG] transformed H30Mb.SPC -> H30MB.SPC
[sigmove 01:36:03 DEBUG] transformed H30Mc.SPC -> H30MC.SPC
[sigmove 01:36:03 DEBUG] transformed H30Md.SPC -> H30MD.SPC
[sigmove 01:36:03 DEBUG] transformed H30Me.SPC -> H30ME.SPC
[sigmove 01:36:03 DEBUG] transformed H30Mf.SPC -> H30MF.SPC
[Status 01:36:03 INFO] data for H30 transferred to science data processing
[Tidy 01:36:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:36:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:36:03 INFO] resetting WatchDogTimer
[Status 01:36:03 INFO] Starting Set [AERI set: name S30, 6 scans, 0 angle, D16300 command]
[Ingest 01:36:03 INFO] Sending XML status message
[Status 01:36:03 INFO] Mirror angle: 0
[Mirror 01:36:03 INFO] rotating to position S
[Status 01:36:04 INFO] .SET file for ACQ96 ready
[Ingest 01:36:04 INFO] Starting acquisition
[Status 01:36:04 INFO] reading housekeeping
[Status 01:36:22 INFO] acquire complete
[Status 01:36:22 INFO] writing housekeeping
[Sequencer 01:36:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:36:22 INFO] incremented S scene to 30 completed views
[Sequencer 01:36:22 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:36:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:36:22 INFO] incremented to [AERI set: name T30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:36:22 INFO] S30.SIG(18)
[sigmove 01:36:22 DEBUG] transformed S30Ma.SPC -> S30MA.SPC
[sigmove 01:36:22 DEBUG] transformed S30Mb.SPC -> S30MB.SPC
[sigmove 01:36:22 DEBUG] transformed S30Mc.SPC -> S30MC.SPC
[sigmove 01:36:22 DEBUG] transformed S30Md.SPC -> S30MD.SPC
[sigmove 01:36:22 DEBUG] transformed S30Me.SPC -> S30ME.SPC
[sigmove 01:36:22 DEBUG] transformed S30Mf.SPC -> S30MF.SPC
[Status 01:36:22 INFO] data for S30 transferred to science data processing
[Tidy 01:36:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:36:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:36:22 INFO] resetting WatchDogTimer
[Status 01:36:22 INFO] Starting Set [AERI set: name T30, 6 scans, 0 angle, D16300 command]
[Ingest 01:36:22 INFO] Sending XML status message
[Status 01:36:22 INFO] Mirror angle: 0
[Mirror 01:36:23 INFO] rotating to position T
[Status 01:36:23 INFO] .SET file for ACQ96 ready
[Ingest 01:36:23 INFO] Starting acquisition
[Status 01:36:23 INFO] reading housekeeping
[Status 01:36:41 INFO] acquire complete
[Status 01:36:41 INFO] writing housekeeping
[Sequencer 01:36:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:36:41 INFO] incremented T scene to 30 completed views
[Sequencer 01:36:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:36:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:36:41 INFO] incremented to [AERI set: name U30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:36:41 INFO] T30.SIG(18)
[sigmove 01:36:41 DEBUG] transformed T30Ma.SPC -> T30MA.SPC
[sigmove 01:36:41 DEBUG] transformed T30Mb.SPC -> T30MB.SPC
[sigmove 01:36:41 DEBUG] transformed T30Mc.SPC -> T30MC.SPC
[sigmove 01:36:41 DEBUG] transformed T30Md.SPC -> T30MD.SPC
[sigmove 01:36:41 DEBUG] transformed T30Me.SPC -> T30ME.SPC
[sigmove 01:36:41 DEBUG] transformed T30Mf.SPC -> T30MF.SPC
[Status 01:36:41 INFO] data for T30 transferred to science data processing
[Tidy 01:36:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:36:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:36:41 INFO] resetting WatchDogTimer
[Status 01:36:42 INFO] Starting Set [AERI set: name U30, 6 scans, 0 angle, D16300 command]
[Ingest 01:36:42 INFO] Sending XML status message
[Status 01:36:42 INFO] Mirror angle: 0
[Mirror 01:36:42 INFO] rotating to position U
[Status 01:36:42 INFO] .SET file for ACQ96 ready
[Ingest 01:36:42 INFO] Starting acquisition
[Status 01:36:42 INFO] reading housekeeping
[Status 01:37:00 INFO] acquire complete
[Status 01:37:01 INFO] writing housekeeping
[Sequencer 01:37:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:37:01 INFO] incremented U scene to 30 completed views
[Sequencer 01:37:01 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:37:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:37:01 INFO] incremented to [AERI set: name V30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:37:01 INFO] U30.SIG(18)
[sigmove 01:37:01 DEBUG] transformed U30Ma.SPC -> U30MA.SPC
[sigmove 01:37:01 DEBUG] transformed U30Mb.SPC -> U30MB.SPC
[sigmove 01:37:01 DEBUG] transformed U30Mc.SPC -> U30MC.SPC
[sigmove 01:37:01 DEBUG] transformed U30Md.SPC -> U30MD.SPC
[sigmove 01:37:01 DEBUG] transformed U30Me.SPC -> U30ME.SPC
[sigmove 01:37:01 DEBUG] transformed U30Mf.SPC -> U30MF.SPC
[Status 01:37:01 INFO] data for U30 transferred to science data processing
[Tidy 01:37:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:37:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:37:01 INFO] resetting WatchDogTimer
[Status 01:37:01 INFO] Starting Set [AERI set: name V30, 6 scans, 0 angle, D16300 command]
[Ingest 01:37:01 INFO] Sending XML status message
[Status 01:37:01 INFO] Mirror angle: 0
[Mirror 01:37:01 INFO] rotating to position V
[Status 01:37:01 INFO] .SET file for ACQ96 ready
[Ingest 01:37:01 INFO] Starting acquisition
[Status 01:37:01 INFO] reading housekeeping
[Status 01:37:19 INFO] acquire complete
[Status 01:37:20 INFO] writing housekeeping
[Sequencer 01:37:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:37:20 INFO] incremented V scene to 30 completed views
[Sequencer 01:37:20 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:37:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:37:20 INFO] incremented to [AERI set: name W30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:37:20 INFO] V30.SIG(18)
[sigmove 01:37:20 DEBUG] transformed V30Ma.SPC -> V30MA.SPC
[sigmove 01:37:20 DEBUG] transformed V30Mb.SPC -> V30MB.SPC
[sigmove 01:37:20 DEBUG] transformed V30Mc.SPC -> V30MC.SPC
[sigmove 01:37:20 DEBUG] transformed V30Md.SPC -> V30MD.SPC
[sigmove 01:37:20 DEBUG] transformed V30Me.SPC -> V30ME.SPC
[sigmove 01:37:20 DEBUG] transformed V30Mf.SPC -> V30MF.SPC
[Status 01:37:20 INFO] data for V30 transferred to science data processing
[Tidy 01:37:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:37:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:37:20 INFO] resetting WatchDogTimer
[Status 01:37:20 INFO] Starting Set [AERI set: name W30, 6 scans, 0 angle, D16300 command]
[Ingest 01:37:20 INFO] Sending XML status message
[Status 01:37:20 INFO] Mirror angle: 0
[Mirror 01:37:20 INFO] rotating to position W
[Status 01:37:20 INFO] .SET file for ACQ96 ready
[Ingest 01:37:20 INFO] Starting acquisition
[Status 01:37:20 INFO] reading housekeeping
[Status 01:37:38 INFO] acquire complete
[Status 01:37:39 INFO] writing housekeeping
[Sequencer 01:37:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:37:39 INFO] incremented W scene to 30 completed views
[Sequencer 01:37:39 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:37:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:37:39 INFO] incremented to [AERI set: name X30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:37:39 INFO] W30.SIG(18)
[sigmove 01:37:39 DEBUG] transformed W30Ma.SPC -> W30MA.SPC
[sigmove 01:37:39 DEBUG] transformed W30Mb.SPC -> W30MB.SPC
[sigmove 01:37:39 DEBUG] transformed W30Mc.SPC -> W30MC.SPC
[sigmove 01:37:39 DEBUG] transformed W30Md.SPC -> W30MD.SPC
[sigmove 01:37:39 DEBUG] transformed W30Me.SPC -> W30ME.SPC
[sigmove 01:37:39 DEBUG] transformed W30Mf.SPC -> W30MF.SPC
[Status 01:37:39 INFO] data for W30 transferred to science data processing
[Tidy 01:37:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:37:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:37:39 INFO] resetting WatchDogTimer
[Status 01:37:39 INFO] Starting Set [AERI set: name X30, 6 scans, 0 angle, D16300 command]
[Ingest 01:37:39 INFO] Sending XML status message
[Status 01:37:39 INFO] Mirror angle: 0
[Mirror 01:37:39 INFO] rotating to position X
[Status 01:37:39 INFO] .SET file for ACQ96 ready
[Ingest 01:37:39 INFO] Starting acquisition
[Status 01:37:39 INFO] reading housekeeping
[Status 01:37:57 INFO] acquire complete
[Status 01:37:58 INFO] writing housekeeping
[Sequencer 01:37:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:37:58 INFO] incremented X scene to 30 completed views
[Sequencer 01:37:58 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:37:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:37:58 INFO] incremented to [AERI set: name Y30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:37:58 INFO] X30.SIG(18)
[sigmove 01:37:58 DEBUG] transformed X30Ma.SPC -> X30MA.SPC
[sigmove 01:37:58 DEBUG] transformed X30Mb.SPC -> X30MB.SPC
[sigmove 01:37:58 DEBUG] transformed X30Mc.SPC -> X30MC.SPC
[sigmove 01:37:58 DEBUG] transformed X30Md.SPC -> X30MD.SPC
[sigmove 01:37:58 DEBUG] transformed X30Me.SPC -> X30ME.SPC
[sigmove 01:37:58 DEBUG] transformed X30Mf.SPC -> X30MF.SPC
[Status 01:37:58 INFO] data for X30 transferred to science data processing
[Tidy 01:37:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:37:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:37:58 INFO] resetting WatchDogTimer
[Status 01:37:58 INFO] Starting Set [AERI set: name Y30, 6 scans, 0 angle, D16300 command]
[Ingest 01:37:58 INFO] Sending XML status message
[Status 01:37:58 INFO] Mirror angle: 0
[Mirror 01:37:58 INFO] rotating to position Y
[Status 01:37:58 INFO] .SET file for ACQ96 ready
[Ingest 01:37:58 INFO] Starting acquisition
[Status 01:37:58 INFO] reading housekeeping
[Status 01:38:17 INFO] acquire complete
[Status 01:38:17 INFO] writing housekeeping
[Sequencer 01:38:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:38:17 INFO] incremented Y scene to 30 completed views
[Sequencer 01:38:17 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:38:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:38:17 INFO] incremented to [AERI set: name Z30, 6 scans, 0 angle, D16300 command] set
[sigmove 01:38:17 INFO] Y30.SIG(18)
[sigmove 01:38:17 DEBUG] transformed Y30Ma.SPC -> Y30MA.SPC
[sigmove 01:38:17 DEBUG] transformed Y30Mb.SPC -> Y30MB.SPC
[sigmove 01:38:17 DEBUG] transformed Y30Mc.SPC -> Y30MC.SPC
[sigmove 01:38:17 DEBUG] transformed Y30Md.SPC -> Y30MD.SPC
[sigmove 01:38:17 DEBUG] transformed Y30Me.SPC -> Y30ME.SPC
[sigmove 01:38:17 DEBUG] transformed Y30Mf.SPC -> Y30MF.SPC
[Status 01:38:17 INFO] data for Y30 transferred to science data processing
[Tidy 01:38:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:38:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:38:17 INFO] resetting WatchDogTimer
[Status 01:38:17 INFO] Starting Set [AERI set: name Z30, 6 scans, 0 angle, D16300 command]
[Ingest 01:38:17 INFO] Sending XML status message
[Status 01:38:17 INFO] Mirror angle: 0
[Mirror 01:38:17 INFO] rotating to position Z
[Status 01:38:17 INFO] .SET file for ACQ96 ready
[Ingest 01:38:17 INFO] Starting acquisition
[Status 01:38:17 INFO] reading housekeeping
[Status 01:38:36 INFO] acquire complete
[Status 01:38:36 INFO] writing housekeeping
[Sequencer 01:38:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:38:36 INFO] incremented Z scene to 30 completed views
[Sequencer 01:38:36 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:38:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:38:36 INFO] incremented to [AERI set: name H31, 6 scans, 60 angle, D22500 command] set
[sigmove 01:38:36 INFO] Z30.SIG(18)
[sigmove 01:38:36 DEBUG] transformed Z30Ma.SPC -> Z30MA.SPC
[sigmove 01:38:36 DEBUG] transformed Z30Mb.SPC -> Z30MB.SPC
[sigmove 01:38:36 DEBUG] transformed Z30Mc.SPC -> Z30MC.SPC
[sigmove 01:38:36 DEBUG] transformed Z30Md.SPC -> Z30MD.SPC
[sigmove 01:38:36 DEBUG] transformed Z30Me.SPC -> Z30ME.SPC
[sigmove 01:38:36 DEBUG] transformed Z30Mf.SPC -> Z30MF.SPC
[Status 01:38:36 INFO] data for Z30 transferred to science data processing
[Tidy 01:38:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:38:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:38:36 INFO] resetting WatchDogTimer
[Status 01:38:36 INFO] Starting Set [AERI set: name H31, 6 scans, 60 angle, D22500 command]
[Ingest 01:38:36 INFO] Sending XML status message
[Status 01:38:36 INFO] Mirror angle: 60
[Mirror 01:38:36 INFO] rotating to position H
[Status 01:38:37 INFO] .SET file for ACQ96 ready
[Ingest 01:38:37 INFO] Starting acquisition
[Status 01:38:37 INFO] reading housekeeping
[Status 01:38:55 INFO] acquire complete
[Status 01:38:55 INFO] writing housekeeping
[Sequencer 01:38:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:38:55 INFO] incremented H scene to 31 completed views
[Sequencer 01:38:55 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:38:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:38:55 INFO] incremented to [AERI set: name A31, 6 scans, 120 angle, D28300 command] set
[sigmove 01:38:55 INFO] H31.SIG(18)
[sigmove 01:38:55 DEBUG] transformed H31Ma.SPC -> H31MA.SPC
[sigmove 01:38:55 DEBUG] transformed H31Mb.SPC -> H31MB.SPC
[sigmove 01:38:55 DEBUG] transformed H31Mc.SPC -> H31MC.SPC
[sigmove 01:38:55 DEBUG] transformed H31Md.SPC -> H31MD.SPC
[sigmove 01:38:55 DEBUG] transformed H31Me.SPC -> H31ME.SPC
[sigmove 01:38:55 DEBUG] transformed H31Mf.SPC -> H31MF.SPC
[Status 01:38:55 INFO] data for H31 transferred to science data processing
[Tidy 01:38:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:38:55 INFO] A29.FIN(19),H29.FIN(19),S29.FIN(19),T29.FIN(19),U29.FIN(19),V29.FIN(19),W29.FIN(19),X29.FIN(19),Y29.FIN(19),Z29.FIN(19),A30.FIN(19),H30.FIN(19),S30.FIN(19),T30.FIN(19),U30.FIN(19),V30.FIN(19),W30.FIN(19),X30.FIN(19),Y30.FIN(19),Z30.FIN(19)
[sigmove 01:38:55 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:38:55 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:38:56 DEBUG] done zipping
[WatchDog 01:38:56 INFO] resetting WatchDogTimer
[Status 01:38:56 INFO] Starting Set [AERI set: name A31, 6 scans, 120 angle, D28300 command]
[Ingest 01:38:56 INFO] Sending XML status message
[Status 01:38:56 INFO] Mirror angle: 120
[Mirror 01:38:56 INFO] rotating to position A
[Status 01:38:57 INFO] .SET file for ACQ96 ready
[Ingest 01:38:57 INFO] Starting acquisition
[Status 01:38:57 INFO] reading housekeeping
[Status 01:39:15 INFO] acquire complete
[Status 01:39:15 INFO] writing housekeeping
[Sequencer 01:39:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:39:15 INFO] incremented A scene to 31 completed views
[Sequencer 01:39:15 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:39:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:39:15 INFO] incremented to [AERI set: name S31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:39:15 INFO] A31.SIG(18)
[sigmove 01:39:15 DEBUG] transformed A31Ma.SPC -> A31MA.SPC
[sigmove 01:39:15 DEBUG] transformed A31Mb.SPC -> A31MB.SPC
[sigmove 01:39:15 DEBUG] transformed A31Mc.SPC -> A31MC.SPC
[sigmove 01:39:15 DEBUG] transformed A31Md.SPC -> A31MD.SPC
[sigmove 01:39:15 DEBUG] transformed A31Me.SPC -> A31ME.SPC
[sigmove 01:39:15 DEBUG] transformed A31Mf.SPC -> A31MF.SPC
[Status 01:39:15 INFO] data for A31 transferred to science data processing
[Tidy 01:39:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:39:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:39:15 INFO] resetting WatchDogTimer
[Status 01:39:15 INFO] Starting Set [AERI set: name S31, 6 scans, 0 angle, D16300 command]
[Ingest 01:39:15 INFO] Sending XML status message
[Status 01:39:15 INFO] Mirror angle: 0
[Mirror 01:39:15 INFO] rotating to position S
[Status 01:39:17 INFO] .SET file for ACQ96 ready
[Ingest 01:39:17 INFO] Starting acquisition
[Status 01:39:17 INFO] reading housekeeping
[Status 01:39:35 INFO] acquire complete
[Status 01:39:36 INFO] writing housekeeping
[Sequencer 01:39:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:39:36 INFO] incremented S scene to 31 completed views
[Sequencer 01:39:36 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:39:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:39:36 INFO] incremented to [AERI set: name T31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:39:36 INFO] S31.SIG(18)
[sigmove 01:39:36 DEBUG] transformed S31Ma.SPC -> S31MA.SPC
[sigmove 01:39:36 DEBUG] transformed S31Mb.SPC -> S31MB.SPC
[sigmove 01:39:36 DEBUG] transformed S31Mc.SPC -> S31MC.SPC
[sigmove 01:39:36 DEBUG] transformed S31Md.SPC -> S31MD.SPC
[sigmove 01:39:36 DEBUG] transformed S31Me.SPC -> S31ME.SPC
[sigmove 01:39:36 DEBUG] transformed S31Mf.SPC -> S31MF.SPC
[Status 01:39:36 INFO] data for S31 transferred to science data processing
[Tidy 01:39:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:39:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:39:36 INFO] resetting WatchDogTimer
[Status 01:39:36 INFO] Starting Set [AERI set: name T31, 6 scans, 0 angle, D16300 command]
[Ingest 01:39:36 INFO] Sending XML status message
[Status 01:39:36 INFO] Mirror angle: 0
[Mirror 01:39:36 INFO] rotating to position T
[Status 01:39:36 INFO] .SET file for ACQ96 ready
[Ingest 01:39:36 INFO] Starting acquisition
[Status 01:39:36 INFO] reading housekeeping
[Status 01:39:54 INFO] acquire complete
[Status 01:39:55 INFO] writing housekeeping
[Sequencer 01:39:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:39:55 INFO] incremented T scene to 31 completed views
[Sequencer 01:39:55 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:39:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:39:55 INFO] incremented to [AERI set: name U31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:39:55 INFO] T31.SIG(18)
[sigmove 01:39:55 DEBUG] transformed T31Ma.SPC -> T31MA.SPC
[sigmove 01:39:55 DEBUG] transformed T31Mb.SPC -> T31MB.SPC
[sigmove 01:39:55 DEBUG] transformed T31Mc.SPC -> T31MC.SPC
[sigmove 01:39:55 DEBUG] transformed T31Md.SPC -> T31MD.SPC
[sigmove 01:39:55 DEBUG] transformed T31Me.SPC -> T31ME.SPC
[sigmove 01:39:55 DEBUG] transformed T31Mf.SPC -> T31MF.SPC
[Status 01:39:55 INFO] data for T31 transferred to science data processing
[Tidy 01:39:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:39:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:39:55 INFO] resetting WatchDogTimer
[Status 01:39:55 INFO] Starting Set [AERI set: name U31, 6 scans, 0 angle, D16300 command]
[Ingest 01:39:55 INFO] Sending XML status message
[Status 01:39:55 INFO] Mirror angle: 0
[Mirror 01:39:55 INFO] rotating to position U
[Status 01:39:55 INFO] .SET file for ACQ96 ready
[Ingest 01:39:55 INFO] Starting acquisition
[Status 01:39:55 INFO] reading housekeeping
[Status 01:40:13 INFO] acquire complete
[Status 01:40:14 INFO] writing housekeeping
[Sequencer 01:40:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:40:14 INFO] incremented U scene to 31 completed views
[Sequencer 01:40:14 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:40:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:40:14 INFO] incremented to [AERI set: name V31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:40:14 INFO] U31.SIG(18)
[sigmove 01:40:14 DEBUG] transformed U31Ma.SPC -> U31MA.SPC
[sigmove 01:40:14 DEBUG] transformed U31Mb.SPC -> U31MB.SPC
[sigmove 01:40:14 DEBUG] transformed U31Mc.SPC -> U31MC.SPC
[sigmove 01:40:14 DEBUG] transformed U31Md.SPC -> U31MD.SPC
[sigmove 01:40:14 DEBUG] transformed U31Me.SPC -> U31ME.SPC
[sigmove 01:40:14 DEBUG] transformed U31Mf.SPC -> U31MF.SPC
[Status 01:40:14 INFO] data for U31 transferred to science data processing
[Tidy 01:40:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:40:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:40:14 INFO] resetting WatchDogTimer
[Status 01:40:14 INFO] Starting Set [AERI set: name V31, 6 scans, 0 angle, D16300 command]
[Ingest 01:40:14 INFO] Sending XML status message
[Status 01:40:14 INFO] Mirror angle: 0
[Mirror 01:40:14 INFO] rotating to position V
[Status 01:40:14 INFO] .SET file for ACQ96 ready
[Ingest 01:40:14 INFO] Starting acquisition
[Status 01:40:14 INFO] reading housekeeping
[Status 01:40:32 INFO] acquire complete
[Status 01:40:33 INFO] writing housekeeping
[Sequencer 01:40:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:40:33 INFO] incremented V scene to 31 completed views
[Sequencer 01:40:33 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:40:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:40:33 INFO] incremented to [AERI set: name W31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:40:33 INFO] V31.SIG(18)
[sigmove 01:40:33 DEBUG] transformed V31Ma.SPC -> V31MA.SPC
[sigmove 01:40:33 DEBUG] transformed V31Mb.SPC -> V31MB.SPC
[sigmove 01:40:33 DEBUG] transformed V31Mc.SPC -> V31MC.SPC
[sigmove 01:40:33 DEBUG] transformed V31Md.SPC -> V31MD.SPC
[sigmove 01:40:33 DEBUG] transformed V31Me.SPC -> V31ME.SPC
[sigmove 01:40:33 DEBUG] transformed V31Mf.SPC -> V31MF.SPC
[Status 01:40:33 INFO] data for V31 transferred to science data processing
[Tidy 01:40:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:40:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:40:33 INFO] resetting WatchDogTimer
[Status 01:40:33 INFO] Starting Set [AERI set: name W31, 6 scans, 0 angle, D16300 command]
[Ingest 01:40:33 INFO] Sending XML status message
[Status 01:40:33 INFO] Mirror angle: 0
[Mirror 01:40:33 INFO] rotating to position W
[Status 01:40:33 INFO] .SET file for ACQ96 ready
[Ingest 01:40:33 INFO] Starting acquisition
[Status 01:40:33 INFO] reading housekeeping
[Status 01:40:51 INFO] acquire complete
[Status 01:40:52 INFO] writing housekeeping
[Sequencer 01:40:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:40:52 INFO] incremented W scene to 31 completed views
[Sequencer 01:40:52 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:40:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:40:52 INFO] incremented to [AERI set: name X31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:40:52 INFO] W31.SIG(18)
[sigmove 01:40:52 DEBUG] transformed W31Ma.SPC -> W31MA.SPC
[sigmove 01:40:52 DEBUG] transformed W31Mb.SPC -> W31MB.SPC
[sigmove 01:40:52 DEBUG] transformed W31Mc.SPC -> W31MC.SPC
[sigmove 01:40:52 DEBUG] transformed W31Md.SPC -> W31MD.SPC
[sigmove 01:40:52 DEBUG] transformed W31Me.SPC -> W31ME.SPC
[sigmove 01:40:52 DEBUG] transformed W31Mf.SPC -> W31MF.SPC
[Status 01:40:52 INFO] data for W31 transferred to science data processing
[Tidy 01:40:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:40:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:40:52 INFO] resetting WatchDogTimer
[Status 01:40:52 INFO] Starting Set [AERI set: name X31, 6 scans, 0 angle, D16300 command]
[Ingest 01:40:52 INFO] Sending XML status message
[Status 01:40:52 INFO] Mirror angle: 0
[Mirror 01:40:52 INFO] rotating to position X
[Status 01:40:52 INFO] .SET file for ACQ96 ready
[Ingest 01:40:52 INFO] Starting acquisition
[Status 01:40:52 INFO] reading housekeeping
[Status 01:41:11 INFO] acquire complete
[Status 01:41:11 INFO] writing housekeeping
[Sequencer 01:41:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:41:11 INFO] incremented X scene to 31 completed views
[Sequencer 01:41:11 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:41:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:41:11 INFO] incremented to [AERI set: name Y31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:41:11 INFO] X31.SIG(18)
[sigmove 01:41:11 DEBUG] transformed X31Ma.SPC -> X31MA.SPC
[sigmove 01:41:11 DEBUG] transformed X31Mb.SPC -> X31MB.SPC
[sigmove 01:41:11 DEBUG] transformed X31Mc.SPC -> X31MC.SPC
[sigmove 01:41:11 DEBUG] transformed X31Md.SPC -> X31MD.SPC
[sigmove 01:41:11 DEBUG] transformed X31Me.SPC -> X31ME.SPC
[sigmove 01:41:11 DEBUG] transformed X31Mf.SPC -> X31MF.SPC
[Status 01:41:11 INFO] data for X31 transferred to science data processing
[Tidy 01:41:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:41:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:41:11 INFO] resetting WatchDogTimer
[Status 01:41:11 INFO] Starting Set [AERI set: name Y31, 6 scans, 0 angle, D16300 command]
[Ingest 01:41:11 INFO] Sending XML status message
[Status 01:41:11 INFO] Mirror angle: 0
[Mirror 01:41:11 INFO] rotating to position Y
[Status 01:41:11 INFO] .SET file for ACQ96 ready
[Ingest 01:41:11 INFO] Starting acquisition
[Status 01:41:11 INFO] reading housekeeping
[Status 01:41:30 INFO] acquire complete
[Status 01:41:30 INFO] writing housekeeping
[Sequencer 01:41:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:41:30 INFO] incremented Y scene to 31 completed views
[Sequencer 01:41:30 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:41:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:41:30 INFO] incremented to [AERI set: name Z31, 6 scans, 0 angle, D16300 command] set
[sigmove 01:41:30 INFO] Y31.SIG(18)
[sigmove 01:41:30 DEBUG] transformed Y31Ma.SPC -> Y31MA.SPC
[sigmove 01:41:30 DEBUG] transformed Y31Mb.SPC -> Y31MB.SPC
[sigmove 01:41:30 DEBUG] transformed Y31Mc.SPC -> Y31MC.SPC
[sigmove 01:41:30 DEBUG] transformed Y31Md.SPC -> Y31MD.SPC
[sigmove 01:41:30 DEBUG] transformed Y31Me.SPC -> Y31ME.SPC
[sigmove 01:41:30 DEBUG] transformed Y31Mf.SPC -> Y31MF.SPC
[Status 01:41:30 INFO] data for Y31 transferred to science data processing
[Tidy 01:41:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:41:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:41:30 INFO] resetting WatchDogTimer
[Status 01:41:30 INFO] Starting Set [AERI set: name Z31, 6 scans, 0 angle, D16300 command]
[Ingest 01:41:30 INFO] Sending XML status message
[Status 01:41:30 INFO] Mirror angle: 0
[Mirror 01:41:30 INFO] rotating to position Z
[Status 01:41:30 INFO] .SET file for ACQ96 ready
[Ingest 01:41:30 INFO] Starting acquisition
[Status 01:41:31 INFO] reading housekeeping
[Status 01:41:49 INFO] acquire complete
[Status 01:41:49 INFO] writing housekeeping
[Sequencer 01:41:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:41:49 INFO] incremented Z scene to 31 completed views
[Sequencer 01:41:49 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:41:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:41:49 INFO] incremented to [AERI set: name A32, 6 scans, 120 angle, D28300 command] set
[sigmove 01:41:49 INFO] Z31.SIG(18)
[sigmove 01:41:49 DEBUG] transformed Z31Ma.SPC -> Z31MA.SPC
[sigmove 01:41:49 DEBUG] transformed Z31Mb.SPC -> Z31MB.SPC
[sigmove 01:41:49 DEBUG] transformed Z31Mc.SPC -> Z31MC.SPC
[sigmove 01:41:49 DEBUG] transformed Z31Md.SPC -> Z31MD.SPC
[sigmove 01:41:49 DEBUG] transformed Z31Me.SPC -> Z31ME.SPC
[sigmove 01:41:49 DEBUG] transformed Z31Mf.SPC -> Z31MF.SPC
[Status 01:41:49 INFO] data for Z31 transferred to science data processing
[Tidy 01:41:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:41:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:41:49 INFO] resetting WatchDogTimer
[Status 01:41:49 INFO] Starting Set [AERI set: name A32, 6 scans, 120 angle, D28300 command]
[Ingest 01:41:49 INFO] Sending XML status message
[Status 01:41:49 INFO] Mirror angle: 120
[Mirror 01:41:49 INFO] rotating to position A
[Status 01:41:50 INFO] .SET file for ACQ96 ready
[Ingest 01:41:51 INFO] Starting acquisition
[Status 01:41:51 INFO] reading housekeeping
[Status 01:42:09 INFO] acquire complete
[Status 01:42:09 INFO] writing housekeeping
[Sequencer 01:42:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:42:09 INFO] incremented A scene to 32 completed views
[Sequencer 01:42:09 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:42:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:42:09 INFO] incremented to [AERI set: name H32, 6 scans, 60 angle, D22500 command] set
[sigmove 01:42:09 INFO] A32.SIG(18)
[sigmove 01:42:09 DEBUG] transformed A32Ma.SPC -> A32MA.SPC
[sigmove 01:42:09 DEBUG] transformed A32Mb.SPC -> A32MB.SPC
[sigmove 01:42:09 DEBUG] transformed A32Mc.SPC -> A32MC.SPC
[sigmove 01:42:09 DEBUG] transformed A32Md.SPC -> A32MD.SPC
[sigmove 01:42:09 DEBUG] transformed A32Me.SPC -> A32ME.SPC
[sigmove 01:42:09 DEBUG] transformed A32Mf.SPC -> A32MF.SPC
[Status 01:42:09 INFO] data for A32 transferred to science data processing
[Tidy 01:42:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:42:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:42:09 INFO] resetting WatchDogTimer
[Status 01:42:09 INFO] Starting Set [AERI set: name H32, 6 scans, 60 angle, D22500 command]
[Ingest 01:42:09 INFO] Sending XML status message
[Status 01:42:09 INFO] Mirror angle: 60
[Mirror 01:42:09 INFO] rotating to position H
[Status 01:42:10 INFO] .SET file for ACQ96 ready
[Ingest 01:42:10 INFO] Starting acquisition
[Status 01:42:10 INFO] reading housekeeping
[Status 01:42:28 INFO] acquire complete
[Status 01:42:28 INFO] writing housekeeping
[Sequencer 01:42:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:42:28 INFO] incremented H scene to 32 completed views
[Sequencer 01:42:28 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:42:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:42:28 INFO] incremented to [AERI set: name S32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:42:28 INFO] H32.SIG(18)
[sigmove 01:42:28 DEBUG] transformed H32Ma.SPC -> H32MA.SPC
[sigmove 01:42:28 DEBUG] transformed H32Mb.SPC -> H32MB.SPC
[sigmove 01:42:28 DEBUG] transformed H32Mc.SPC -> H32MC.SPC
[sigmove 01:42:28 DEBUG] transformed H32Md.SPC -> H32MD.SPC
[sigmove 01:42:28 DEBUG] transformed H32Me.SPC -> H32ME.SPC
[sigmove 01:42:28 DEBUG] transformed H32Mf.SPC -> H32MF.SPC
[Status 01:42:28 INFO] data for H32 transferred to science data processing
[Tidy 01:42:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:42:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:42:28 INFO] resetting WatchDogTimer
[Status 01:42:28 INFO] Starting Set [AERI set: name S32, 6 scans, 0 angle, D16300 command]
[Ingest 01:42:28 INFO] Sending XML status message
[Status 01:42:28 INFO] Mirror angle: 0
[Mirror 01:42:29 INFO] rotating to position S
[Status 01:42:29 INFO] .SET file for ACQ96 ready
[Ingest 01:42:29 INFO] Starting acquisition
[Status 01:42:29 INFO] reading housekeeping
[Status 01:42:47 INFO] acquire complete
[Status 01:42:47 INFO] writing housekeeping
[Sequencer 01:42:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:42:47 INFO] incremented S scene to 32 completed views
[Sequencer 01:42:47 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:42:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:42:47 INFO] incremented to [AERI set: name T32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:42:47 INFO] S32.SIG(18)
[sigmove 01:42:47 DEBUG] transformed S32Ma.SPC -> S32MA.SPC
[sigmove 01:42:47 DEBUG] transformed S32Mb.SPC -> S32MB.SPC
[sigmove 01:42:47 DEBUG] transformed S32Mc.SPC -> S32MC.SPC
[sigmove 01:42:47 DEBUG] transformed S32Md.SPC -> S32MD.SPC
[sigmove 01:42:47 DEBUG] transformed S32Me.SPC -> S32ME.SPC
[sigmove 01:42:47 DEBUG] transformed S32Mf.SPC -> S32MF.SPC
[Status 01:42:47 INFO] data for S32 transferred to science data processing
[Tidy 01:42:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:42:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:42:47 INFO] resetting WatchDogTimer
[Status 01:42:48 INFO] Starting Set [AERI set: name T32, 6 scans, 0 angle, D16300 command]
[Ingest 01:42:48 INFO] Sending XML status message
[Status 01:42:48 INFO] Mirror angle: 0
[Mirror 01:42:48 INFO] rotating to position T
[Status 01:42:48 INFO] .SET file for ACQ96 ready
[Ingest 01:42:48 INFO] Starting acquisition
[Status 01:42:48 INFO] reading housekeeping
[Status 01:43:06 INFO] acquire complete
[Status 01:43:07 INFO] writing housekeeping
[Sequencer 01:43:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:43:07 INFO] incremented T scene to 32 completed views
[Sequencer 01:43:07 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:43:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:43:07 INFO] incremented to [AERI set: name U32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:43:07 INFO] T32.SIG(18)
[sigmove 01:43:07 DEBUG] transformed T32Ma.SPC -> T32MA.SPC
[sigmove 01:43:07 DEBUG] transformed T32Mb.SPC -> T32MB.SPC
[sigmove 01:43:07 DEBUG] transformed T32Mc.SPC -> T32MC.SPC
[sigmove 01:43:07 DEBUG] transformed T32Md.SPC -> T32MD.SPC
[sigmove 01:43:07 DEBUG] transformed T32Me.SPC -> T32ME.SPC
[sigmove 01:43:07 DEBUG] transformed T32Mf.SPC -> T32MF.SPC
[Status 01:43:07 INFO] data for T32 transferred to science data processing
[Tidy 01:43:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:43:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:43:07 INFO] resetting WatchDogTimer
[Status 01:43:07 INFO] Starting Set [AERI set: name U32, 6 scans, 0 angle, D16300 command]
[Ingest 01:43:07 INFO] Sending XML status message
[Status 01:43:07 INFO] Mirror angle: 0
[Mirror 01:43:07 INFO] rotating to position U
[Status 01:43:07 INFO] .SET file for ACQ96 ready
[Ingest 01:43:07 INFO] Starting acquisition
[Status 01:43:07 INFO] reading housekeeping
[Status 01:43:25 INFO] acquire complete
[Status 01:43:26 INFO] writing housekeeping
[Sequencer 01:43:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:43:26 INFO] incremented U scene to 32 completed views
[Sequencer 01:43:26 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:43:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:43:26 INFO] incremented to [AERI set: name V32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:43:26 INFO] U32.SIG(18)
[sigmove 01:43:26 DEBUG] transformed U32Ma.SPC -> U32MA.SPC
[sigmove 01:43:26 DEBUG] transformed U32Mb.SPC -> U32MB.SPC
[sigmove 01:43:26 DEBUG] transformed U32Mc.SPC -> U32MC.SPC
[sigmove 01:43:26 DEBUG] transformed U32Md.SPC -> U32MD.SPC
[sigmove 01:43:26 DEBUG] transformed U32Me.SPC -> U32ME.SPC
[sigmove 01:43:26 DEBUG] transformed U32Mf.SPC -> U32MF.SPC
[Status 01:43:26 INFO] data for U32 transferred to science data processing
[Tidy 01:43:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:43:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:43:26 INFO] resetting WatchDogTimer
[Status 01:43:26 INFO] Starting Set [AERI set: name V32, 6 scans, 0 angle, D16300 command]
[Ingest 01:43:26 INFO] Sending XML status message
[Status 01:43:26 INFO] Mirror angle: 0
[Mirror 01:43:26 INFO] rotating to position V
[Status 01:43:26 INFO] .SET file for ACQ96 ready
[Ingest 01:43:26 INFO] Starting acquisition
[Status 01:43:26 INFO] reading housekeeping
[Status 01:43:48 INFO] acquire complete
[Status 01:43:48 INFO] writing housekeeping
[Sequencer 01:43:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:43:48 INFO] incremented V scene to 32 completed views
[Sequencer 01:43:48 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:43:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:43:48 INFO] incremented to [AERI set: name W32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:43:48 INFO] V32.SIG(18)
[sigmove 01:43:48 DEBUG] transformed V32Ma.SPC -> V32MA.SPC
[sigmove 01:43:48 DEBUG] transformed V32Mb.SPC -> V32MB.SPC
[sigmove 01:43:48 DEBUG] transformed V32Mc.SPC -> V32MC.SPC
[sigmove 01:43:48 DEBUG] transformed V32Md.SPC -> V32MD.SPC
[sigmove 01:43:48 DEBUG] transformed V32Me.SPC -> V32ME.SPC
[sigmove 01:43:48 DEBUG] transformed V32Mf.SPC -> V32MF.SPC
[Status 01:43:48 INFO] data for V32 transferred to science data processing
[Tidy 01:43:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:43:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:43:48 INFO] resetting WatchDogTimer
[Status 01:43:48 INFO] Starting Set [AERI set: name W32, 6 scans, 0 angle, D16300 command]
[Ingest 01:43:48 INFO] Sending XML status message
[Status 01:43:48 INFO] Mirror angle: 0
[Mirror 01:43:48 INFO] rotating to position W
[Status 01:43:48 INFO] .SET file for ACQ96 ready
[Ingest 01:43:49 INFO] Starting acquisition
[Status 01:43:49 INFO] reading housekeeping
[Status 01:44:07 INFO] acquire complete
[Status 01:44:07 INFO] writing housekeeping
[Sequencer 01:44:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:44:07 INFO] incremented W scene to 32 completed views
[Sequencer 01:44:07 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:44:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:44:07 INFO] incremented to [AERI set: name X32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:44:07 INFO] W32.SIG(18)
[sigmove 01:44:07 DEBUG] transformed W32Ma.SPC -> W32MA.SPC
[sigmove 01:44:07 DEBUG] transformed W32Mb.SPC -> W32MB.SPC
[sigmove 01:44:07 DEBUG] transformed W32Mc.SPC -> W32MC.SPC
[sigmove 01:44:07 DEBUG] transformed W32Md.SPC -> W32MD.SPC
[sigmove 01:44:07 DEBUG] transformed W32Me.SPC -> W32ME.SPC
[sigmove 01:44:07 DEBUG] transformed W32Mf.SPC -> W32MF.SPC
[Status 01:44:07 INFO] data for W32 transferred to science data processing
[Tidy 01:44:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:44:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:44:07 INFO] resetting WatchDogTimer
[Status 01:44:07 INFO] Starting Set [AERI set: name X32, 6 scans, 0 angle, D16300 command]
[Ingest 01:44:07 INFO] Sending XML status message
[Status 01:44:07 INFO] Mirror angle: 0
[Mirror 01:44:07 INFO] rotating to position X
[Status 01:44:08 INFO] .SET file for ACQ96 ready
[Ingest 01:44:08 INFO] Starting acquisition
[Status 01:44:08 INFO] reading housekeeping
[Status 01:44:26 INFO] acquire complete
[Status 01:44:26 INFO] writing housekeeping
[Sequencer 01:44:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:44:26 INFO] incremented X scene to 32 completed views
[Sequencer 01:44:26 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:44:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:44:26 INFO] incremented to [AERI set: name Y32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:44:26 INFO] X32.SIG(18)
[sigmove 01:44:26 DEBUG] transformed X32Ma.SPC -> X32MA.SPC
[sigmove 01:44:26 DEBUG] transformed X32Mb.SPC -> X32MB.SPC
[sigmove 01:44:26 DEBUG] transformed X32Mc.SPC -> X32MC.SPC
[sigmove 01:44:26 DEBUG] transformed X32Md.SPC -> X32MD.SPC
[sigmove 01:44:26 DEBUG] transformed X32Me.SPC -> X32ME.SPC
[sigmove 01:44:26 DEBUG] transformed X32Mf.SPC -> X32MF.SPC
[Status 01:44:26 INFO] data for X32 transferred to science data processing
[Tidy 01:44:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:44:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:44:26 INFO] resetting WatchDogTimer
[Status 01:44:26 INFO] Starting Set [AERI set: name Y32, 6 scans, 0 angle, D16300 command]
[Ingest 01:44:26 INFO] Sending XML status message
[Status 01:44:26 INFO] Mirror angle: 0
[Mirror 01:44:26 INFO] rotating to position Y
[Status 01:44:27 INFO] .SET file for ACQ96 ready
[Ingest 01:44:27 INFO] Starting acquisition
[Status 01:44:27 INFO] reading housekeeping
[Status 01:44:45 INFO] acquire complete
[Status 01:44:45 INFO] writing housekeeping
[Sequencer 01:44:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:44:45 INFO] incremented Y scene to 32 completed views
[Sequencer 01:44:45 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:44:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:44:45 INFO] incremented to [AERI set: name Z32, 6 scans, 0 angle, D16300 command] set
[sigmove 01:44:45 INFO] Y32.SIG(18)
[sigmove 01:44:45 DEBUG] transformed Y32Ma.SPC -> Y32MA.SPC
[sigmove 01:44:45 DEBUG] transformed Y32Mb.SPC -> Y32MB.SPC
[sigmove 01:44:45 DEBUG] transformed Y32Mc.SPC -> Y32MC.SPC
[sigmove 01:44:45 DEBUG] transformed Y32Md.SPC -> Y32MD.SPC
[sigmove 01:44:45 DEBUG] transformed Y32Me.SPC -> Y32ME.SPC
[sigmove 01:44:45 DEBUG] transformed Y32Mf.SPC -> Y32MF.SPC
[Status 01:44:45 INFO] data for Y32 transferred to science data processing
[Tidy 01:44:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:44:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:44:45 INFO] resetting WatchDogTimer
[Status 01:44:45 INFO] Starting Set [AERI set: name Z32, 6 scans, 0 angle, D16300 command]
[Ingest 01:44:45 INFO] Sending XML status message
[Status 01:44:45 INFO] Mirror angle: 0
[Mirror 01:44:46 INFO] rotating to position Z
[Status 01:44:46 INFO] .SET file for ACQ96 ready
[Ingest 01:44:46 INFO] Starting acquisition
[Status 01:44:46 INFO] reading housekeeping
[Status 01:45:04 INFO] acquire complete
[Status 01:45:04 INFO] writing housekeeping
[Sequencer 01:45:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:45:04 INFO] incremented Z scene to 32 completed views
[Sequencer 01:45:04 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:45:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:45:04 INFO] incremented to [AERI set: name H33, 6 scans, 60 angle, D22500 command] set
[sigmove 01:45:04 INFO] Z32.SIG(18)
[sigmove 01:45:04 DEBUG] transformed Z32Ma.SPC -> Z32MA.SPC
[sigmove 01:45:04 DEBUG] transformed Z32Mb.SPC -> Z32MB.SPC
[sigmove 01:45:04 DEBUG] transformed Z32Mc.SPC -> Z32MC.SPC
[sigmove 01:45:04 DEBUG] transformed Z32Md.SPC -> Z32MD.SPC
[sigmove 01:45:04 DEBUG] transformed Z32Me.SPC -> Z32ME.SPC
[sigmove 01:45:04 DEBUG] transformed Z32Mf.SPC -> Z32MF.SPC
[Status 01:45:04 INFO] data for Z32 transferred to science data processing
[Tidy 01:45:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:45:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:45:04 INFO] resetting WatchDogTimer
[Status 01:45:05 INFO] Starting Set [AERI set: name H33, 6 scans, 60 angle, D22500 command]
[Ingest 01:45:05 INFO] Sending XML status message
[Status 01:45:05 INFO] Mirror angle: 60
[Mirror 01:45:05 INFO] rotating to position H
[Status 01:45:05 INFO] .SET file for ACQ96 ready
[Ingest 01:45:05 INFO] Starting acquisition
[Status 01:45:06 INFO] reading housekeeping
[Status 01:45:23 INFO] acquire complete
[Status 01:45:24 INFO] writing housekeeping
[Sequencer 01:45:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:45:24 INFO] incremented H scene to 33 completed views
[Sequencer 01:45:24 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:45:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:45:24 INFO] incremented to [AERI set: name A33, 6 scans, 120 angle, D28300 command] set
[sigmove 01:45:24 INFO] H33.SIG(18)
[sigmove 01:45:24 DEBUG] transformed H33Ma.SPC -> H33MA.SPC
[sigmove 01:45:24 DEBUG] transformed H33Mb.SPC -> H33MB.SPC
[sigmove 01:45:24 DEBUG] transformed H33Mc.SPC -> H33MC.SPC
[sigmove 01:45:24 DEBUG] transformed H33Md.SPC -> H33MD.SPC
[sigmove 01:45:24 DEBUG] transformed H33Me.SPC -> H33ME.SPC
[sigmove 01:45:24 DEBUG] transformed H33Mf.SPC -> H33MF.SPC
[Status 01:45:24 INFO] data for H33 transferred to science data processing
[Tidy 01:45:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:45:24 INFO] A31.FIN(19),H31.FIN(19),S31.FIN(19),T31.FIN(19),U31.FIN(19),V31.FIN(19),W31.FIN(19),X31.FIN(19),Y31.FIN(19),Z31.FIN(19),A32.FIN(19),H32.FIN(19),S32.FIN(19),T32.FIN(19),U32.FIN(19),V32.FIN(19),W32.FIN(19),X32.FIN(19),Y32.FIN(19),Z32.FIN(19)
[sigmove 01:45:24 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:45:24 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:45:24 DEBUG] done zipping
[WatchDog 01:45:24 INFO] resetting WatchDogTimer
[Status 01:45:25 INFO] Starting Set [AERI set: name A33, 6 scans, 120 angle, D28300 command]
[Ingest 01:45:25 INFO] Sending XML status message
[Status 01:45:25 INFO] Mirror angle: 120
[Mirror 01:45:25 INFO] rotating to position A
[Status 01:45:25 INFO] .SET file for ACQ96 ready
[Ingest 01:45:25 INFO] Starting acquisition
[Status 01:45:26 INFO] reading housekeeping
[Status 01:45:43 INFO] acquire complete
[Status 01:45:44 INFO] writing housekeeping
[Sequencer 01:45:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:45:44 INFO] incremented A scene to 33 completed views
[Sequencer 01:45:44 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:45:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:45:44 INFO] incremented to [AERI set: name S33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:45:44 INFO] A33.SIG(18)
[sigmove 01:45:44 DEBUG] transformed A33Ma.SPC -> A33MA.SPC
[sigmove 01:45:44 DEBUG] transformed A33Mb.SPC -> A33MB.SPC
[sigmove 01:45:44 DEBUG] transformed A33Mc.SPC -> A33MC.SPC
[sigmove 01:45:44 DEBUG] transformed A33Md.SPC -> A33MD.SPC
[sigmove 01:45:44 DEBUG] transformed A33Me.SPC -> A33ME.SPC
[sigmove 01:45:44 DEBUG] transformed A33Mf.SPC -> A33MF.SPC
[Status 01:45:44 INFO] data for A33 transferred to science data processing
[Tidy 01:45:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:45:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:45:44 INFO] resetting WatchDogTimer
[Status 01:45:44 INFO] Starting Set [AERI set: name S33, 6 scans, 0 angle, D16300 command]
[Ingest 01:45:44 INFO] Sending XML status message
[Status 01:45:44 INFO] Mirror angle: 0
[Mirror 01:45:44 INFO] rotating to position S
[Status 01:45:45 INFO] .SET file for ACQ96 ready
[Ingest 01:45:45 INFO] Starting acquisition
[Status 01:45:45 INFO] reading housekeeping
[Status 01:46:04 INFO] acquire complete
[Status 01:46:04 INFO] writing housekeeping
[Sequencer 01:46:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:46:04 INFO] incremented S scene to 33 completed views
[Sequencer 01:46:04 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:46:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:46:04 INFO] incremented to [AERI set: name T33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:46:04 INFO] S33.SIG(18)
[sigmove 01:46:04 DEBUG] transformed S33Ma.SPC -> S33MA.SPC
[sigmove 01:46:04 DEBUG] transformed S33Mb.SPC -> S33MB.SPC
[sigmove 01:46:04 DEBUG] transformed S33Mc.SPC -> S33MC.SPC
[sigmove 01:46:04 DEBUG] transformed S33Md.SPC -> S33MD.SPC
[sigmove 01:46:04 DEBUG] transformed S33Me.SPC -> S33ME.SPC
[sigmove 01:46:04 DEBUG] transformed S33Mf.SPC -> S33MF.SPC
[Status 01:46:04 INFO] data for S33 transferred to science data processing
[Tidy 01:46:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:46:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:46:04 INFO] resetting WatchDogTimer
[Status 01:46:04 INFO] Starting Set [AERI set: name T33, 6 scans, 0 angle, D16300 command]
[Ingest 01:46:04 INFO] Sending XML status message
[Status 01:46:04 INFO] Mirror angle: 0
[Mirror 01:46:04 INFO] rotating to position T
[Status 01:46:04 INFO] .SET file for ACQ96 ready
[Ingest 01:46:04 INFO] Starting acquisition
[Status 01:46:05 INFO] reading housekeeping
[Status 01:46:23 INFO] acquire complete
[Status 01:46:23 INFO] writing housekeeping
[Sequencer 01:46:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:46:23 INFO] incremented T scene to 33 completed views
[Sequencer 01:46:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:46:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:46:23 INFO] incremented to [AERI set: name U33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:46:23 INFO] T33.SIG(18)
[sigmove 01:46:23 DEBUG] transformed T33Ma.SPC -> T33MA.SPC
[sigmove 01:46:23 DEBUG] transformed T33Mb.SPC -> T33MB.SPC
[sigmove 01:46:23 DEBUG] transformed T33Mc.SPC -> T33MC.SPC
[sigmove 01:46:23 DEBUG] transformed T33Md.SPC -> T33MD.SPC
[sigmove 01:46:23 DEBUG] transformed T33Me.SPC -> T33ME.SPC
[sigmove 01:46:23 DEBUG] transformed T33Mf.SPC -> T33MF.SPC
[Status 01:46:23 INFO] data for T33 transferred to science data processing
[Tidy 01:46:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:46:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:46:23 INFO] resetting WatchDogTimer
[Status 01:46:23 INFO] Starting Set [AERI set: name U33, 6 scans, 0 angle, D16300 command]
[Ingest 01:46:23 INFO] Sending XML status message
[Status 01:46:23 INFO] Mirror angle: 0
[Mirror 01:46:23 INFO] rotating to position U
[Status 01:46:23 INFO] .SET file for ACQ96 ready
[Ingest 01:46:24 INFO] Starting acquisition
[Status 01:46:24 INFO] reading housekeeping
[Status 01:46:42 INFO] acquire complete
[Status 01:46:42 INFO] writing housekeeping
[Sequencer 01:46:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:46:42 INFO] incremented U scene to 33 completed views
[Sequencer 01:46:42 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:46:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:46:42 INFO] incremented to [AERI set: name V33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:46:42 INFO] U33.SIG(18)
[sigmove 01:46:42 DEBUG] transformed U33Ma.SPC -> U33MA.SPC
[sigmove 01:46:42 DEBUG] transformed U33Mb.SPC -> U33MB.SPC
[sigmove 01:46:42 DEBUG] transformed U33Mc.SPC -> U33MC.SPC
[sigmove 01:46:42 DEBUG] transformed U33Md.SPC -> U33MD.SPC
[sigmove 01:46:42 DEBUG] transformed U33Me.SPC -> U33ME.SPC
[sigmove 01:46:42 DEBUG] transformed U33Mf.SPC -> U33MF.SPC
[Status 01:46:42 INFO] data for U33 transferred to science data processing
[Tidy 01:46:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:46:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:46:42 INFO] resetting WatchDogTimer
[Status 01:46:42 INFO] Starting Set [AERI set: name V33, 6 scans, 0 angle, D16300 command]
[Ingest 01:46:42 INFO] Sending XML status message
[Status 01:46:42 INFO] Mirror angle: 0
[Mirror 01:46:42 INFO] rotating to position V
[Status 01:46:42 INFO] .SET file for ACQ96 ready
[Ingest 01:46:43 INFO] Starting acquisition
[Status 01:46:43 INFO] reading housekeeping
[Status 01:47:01 INFO] acquire complete
[Status 01:47:01 INFO] writing housekeeping
[Sequencer 01:47:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:47:01 INFO] incremented V scene to 33 completed views
[Sequencer 01:47:01 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:47:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:47:01 INFO] incremented to [AERI set: name W33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:47:01 INFO] V33.SIG(18)
[sigmove 01:47:01 DEBUG] transformed V33Ma.SPC -> V33MA.SPC
[sigmove 01:47:01 DEBUG] transformed V33Mb.SPC -> V33MB.SPC
[sigmove 01:47:01 DEBUG] transformed V33Mc.SPC -> V33MC.SPC
[sigmove 01:47:01 DEBUG] transformed V33Md.SPC -> V33MD.SPC
[sigmove 01:47:01 DEBUG] transformed V33Me.SPC -> V33ME.SPC
[sigmove 01:47:01 DEBUG] transformed V33Mf.SPC -> V33MF.SPC
[Status 01:47:01 INFO] data for V33 transferred to science data processing
[Tidy 01:47:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:47:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:47:01 INFO] resetting WatchDogTimer
[Status 01:47:01 INFO] Starting Set [AERI set: name W33, 6 scans, 0 angle, D16300 command]
[Ingest 01:47:01 INFO] Sending XML status message
[Status 01:47:01 INFO] Mirror angle: 0
[Mirror 01:47:01 INFO] rotating to position W
[Status 01:47:02 INFO] .SET file for ACQ96 ready
[Ingest 01:47:02 INFO] Starting acquisition
[Status 01:47:02 INFO] reading housekeeping
[Status 01:47:20 INFO] acquire complete
[Status 01:47:20 INFO] writing housekeeping
[Sequencer 01:47:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:47:20 INFO] incremented W scene to 33 completed views
[Sequencer 01:47:20 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:47:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:47:20 INFO] incremented to [AERI set: name X33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:47:20 INFO] W33.SIG(18)
[sigmove 01:47:20 DEBUG] transformed W33Ma.SPC -> W33MA.SPC
[sigmove 01:47:20 DEBUG] transformed W33Mb.SPC -> W33MB.SPC
[sigmove 01:47:20 DEBUG] transformed W33Mc.SPC -> W33MC.SPC
[sigmove 01:47:20 DEBUG] transformed W33Md.SPC -> W33MD.SPC
[sigmove 01:47:20 DEBUG] transformed W33Me.SPC -> W33ME.SPC
[sigmove 01:47:20 DEBUG] transformed W33Mf.SPC -> W33MF.SPC
[Status 01:47:20 INFO] data for W33 transferred to science data processing
[Tidy 01:47:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:47:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:47:20 INFO] resetting WatchDogTimer
[Status 01:47:20 INFO] Starting Set [AERI set: name X33, 6 scans, 0 angle, D16300 command]
[Ingest 01:47:20 INFO] Sending XML status message
[Status 01:47:20 INFO] Mirror angle: 0
[Mirror 01:47:20 INFO] rotating to position X
[Status 01:47:21 INFO] .SET file for ACQ96 ready
[Ingest 01:47:21 INFO] Starting acquisition
[Status 01:47:21 INFO] reading housekeeping
[Status 01:47:39 INFO] acquire complete
[Status 01:47:39 INFO] writing housekeeping
[Sequencer 01:47:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:47:39 INFO] incremented X scene to 33 completed views
[Sequencer 01:47:39 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:47:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:47:39 INFO] incremented to [AERI set: name Y33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:47:39 INFO] X33.SIG(18)
[sigmove 01:47:39 DEBUG] transformed X33Ma.SPC -> X33MA.SPC
[sigmove 01:47:39 DEBUG] transformed X33Mb.SPC -> X33MB.SPC
[sigmove 01:47:39 DEBUG] transformed X33Mc.SPC -> X33MC.SPC
[sigmove 01:47:39 DEBUG] transformed X33Md.SPC -> X33MD.SPC
[sigmove 01:47:39 DEBUG] transformed X33Me.SPC -> X33ME.SPC
[sigmove 01:47:39 DEBUG] transformed X33Mf.SPC -> X33MF.SPC
[Status 01:47:39 INFO] data for X33 transferred to science data processing
[Tidy 01:47:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:47:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:47:39 INFO] resetting WatchDogTimer
[Status 01:47:39 INFO] Starting Set [AERI set: name Y33, 6 scans, 0 angle, D16300 command]
[Ingest 01:47:39 INFO] Sending XML status message
[Status 01:47:39 INFO] Mirror angle: 0
[Mirror 01:47:40 INFO] rotating to position Y
[Status 01:47:40 INFO] .SET file for ACQ96 ready
[Ingest 01:47:40 INFO] Starting acquisition
[Status 01:47:40 INFO] reading housekeeping
[Status 01:47:58 INFO] acquire complete
[Status 01:47:58 INFO] writing housekeeping
[Sequencer 01:47:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:47:58 INFO] incremented Y scene to 33 completed views
[Sequencer 01:47:58 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:47:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:47:58 INFO] incremented to [AERI set: name Z33, 6 scans, 0 angle, D16300 command] set
[sigmove 01:47:58 INFO] Y33.SIG(18)
[sigmove 01:47:58 DEBUG] transformed Y33Ma.SPC -> Y33MA.SPC
[sigmove 01:47:58 DEBUG] transformed Y33Mb.SPC -> Y33MB.SPC
[sigmove 01:47:58 DEBUG] transformed Y33Mc.SPC -> Y33MC.SPC
[sigmove 01:47:58 DEBUG] transformed Y33Md.SPC -> Y33MD.SPC
[sigmove 01:47:58 DEBUG] transformed Y33Me.SPC -> Y33ME.SPC
[sigmove 01:47:58 DEBUG] transformed Y33Mf.SPC -> Y33MF.SPC
[Status 01:47:58 INFO] data for Y33 transferred to science data processing
[Tidy 01:47:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:47:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:47:58 INFO] resetting WatchDogTimer
[Status 01:47:59 INFO] Starting Set [AERI set: name Z33, 6 scans, 0 angle, D16300 command]
[Ingest 01:47:59 INFO] Sending XML status message
[Status 01:47:59 INFO] Mirror angle: 0
[Mirror 01:47:59 INFO] rotating to position Z
[Status 01:47:59 INFO] .SET file for ACQ96 ready
[Ingest 01:47:59 INFO] Starting acquisition
[Status 01:47:59 INFO] reading housekeeping
[Status 01:48:17 INFO] acquire complete
[Status 01:48:18 INFO] writing housekeeping
[Sequencer 01:48:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:48:18 INFO] incremented Z scene to 33 completed views
[Sequencer 01:48:18 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:48:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:48:18 INFO] incremented to [AERI set: name A34, 6 scans, 120 angle, D28300 command] set
[sigmove 01:48:18 INFO] Z33.SIG(18)
[sigmove 01:48:18 DEBUG] transformed Z33Ma.SPC -> Z33MA.SPC
[sigmove 01:48:18 DEBUG] transformed Z33Mb.SPC -> Z33MB.SPC
[sigmove 01:48:18 DEBUG] transformed Z33Mc.SPC -> Z33MC.SPC
[sigmove 01:48:18 DEBUG] transformed Z33Md.SPC -> Z33MD.SPC
[sigmove 01:48:18 DEBUG] transformed Z33Me.SPC -> Z33ME.SPC
[sigmove 01:48:18 DEBUG] transformed Z33Mf.SPC -> Z33MF.SPC
[Status 01:48:18 INFO] data for Z33 transferred to science data processing
[Tidy 01:48:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:48:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:48:18 INFO] resetting WatchDogTimer
[Status 01:48:18 INFO] Starting Set [AERI set: name A34, 6 scans, 120 angle, D28300 command]
[Ingest 01:48:18 INFO] Sending XML status message
[Status 01:48:18 INFO] Mirror angle: 120
[Mirror 01:48:18 INFO] rotating to position A
[Status 01:48:19 INFO] .SET file for ACQ96 ready
[Ingest 01:48:19 INFO] Starting acquisition
[Status 01:48:19 INFO] reading housekeeping
[Status 01:48:37 INFO] acquire complete
[Status 01:48:38 INFO] writing housekeeping
[Sequencer 01:48:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:48:38 INFO] incremented A scene to 34 completed views
[Sequencer 01:48:38 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:48:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:48:38 INFO] incremented to [AERI set: name H34, 6 scans, 60 angle, D22500 command] set
[sigmove 01:48:38 INFO] A34.SIG(18)
[sigmove 01:48:38 DEBUG] transformed A34Ma.SPC -> A34MA.SPC
[sigmove 01:48:38 DEBUG] transformed A34Mb.SPC -> A34MB.SPC
[sigmove 01:48:38 DEBUG] transformed A34Mc.SPC -> A34MC.SPC
[sigmove 01:48:38 DEBUG] transformed A34Md.SPC -> A34MD.SPC
[sigmove 01:48:38 DEBUG] transformed A34Me.SPC -> A34ME.SPC
[sigmove 01:48:38 DEBUG] transformed A34Mf.SPC -> A34MF.SPC
[Status 01:48:38 INFO] data for A34 transferred to science data processing
[Tidy 01:48:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:48:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:48:38 INFO] resetting WatchDogTimer
[Status 01:48:38 INFO] Starting Set [AERI set: name H34, 6 scans, 60 angle, D22500 command]
[Ingest 01:48:38 INFO] Sending XML status message
[Status 01:48:38 INFO] Mirror angle: 60
[Mirror 01:48:38 INFO] rotating to position H
[Status 01:48:39 INFO] .SET file for ACQ96 ready
[Ingest 01:48:39 INFO] Starting acquisition
[Status 01:48:39 INFO] reading housekeeping
[Status 01:48:56 INFO] acquire complete
[Status 01:48:57 INFO] writing housekeeping
[Sequencer 01:48:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:48:57 INFO] incremented H scene to 34 completed views
[Sequencer 01:48:57 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:48:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:48:57 INFO] incremented to [AERI set: name S34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:48:57 INFO] H34.SIG(18)
[sigmove 01:48:57 DEBUG] transformed H34Ma.SPC -> H34MA.SPC
[sigmove 01:48:57 DEBUG] transformed H34Mb.SPC -> H34MB.SPC
[sigmove 01:48:57 DEBUG] transformed H34Mc.SPC -> H34MC.SPC
[sigmove 01:48:57 DEBUG] transformed H34Md.SPC -> H34MD.SPC
[sigmove 01:48:57 DEBUG] transformed H34Me.SPC -> H34ME.SPC
[sigmove 01:48:57 DEBUG] transformed H34Mf.SPC -> H34MF.SPC
[Status 01:48:57 INFO] data for H34 transferred to science data processing
[Tidy 01:48:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:48:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:48:57 INFO] resetting WatchDogTimer
[Status 01:48:57 INFO] Starting Set [AERI set: name S34, 6 scans, 0 angle, D16300 command]
[Ingest 01:48:57 INFO] Sending XML status message
[Status 01:48:57 INFO] Mirror angle: 0
[Mirror 01:48:57 INFO] rotating to position S
[Status 01:48:58 INFO] .SET file for ACQ96 ready
[Ingest 01:48:58 INFO] Starting acquisition
[Status 01:48:58 INFO] reading housekeeping
[Status 01:49:16 INFO] acquire complete
[Status 01:49:16 INFO] writing housekeeping
[Sequencer 01:49:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:49:16 INFO] incremented S scene to 34 completed views
[Sequencer 01:49:16 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:49:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:49:16 INFO] incremented to [AERI set: name T34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:49:16 INFO] S34.SIG(18)
[sigmove 01:49:16 DEBUG] transformed S34Ma.SPC -> S34MA.SPC
[sigmove 01:49:16 DEBUG] transformed S34Mb.SPC -> S34MB.SPC
[sigmove 01:49:16 DEBUG] transformed S34Mc.SPC -> S34MC.SPC
[sigmove 01:49:16 DEBUG] transformed S34Md.SPC -> S34MD.SPC
[sigmove 01:49:16 DEBUG] transformed S34Me.SPC -> S34ME.SPC
[sigmove 01:49:16 DEBUG] transformed S34Mf.SPC -> S34MF.SPC
[Status 01:49:16 INFO] data for S34 transferred to science data processing
[Tidy 01:49:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:49:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:49:16 INFO] resetting WatchDogTimer
[Status 01:49:16 INFO] Starting Set [AERI set: name T34, 6 scans, 0 angle, D16300 command]
[Ingest 01:49:16 INFO] Sending XML status message
[Status 01:49:16 INFO] Mirror angle: 0
[Mirror 01:49:16 INFO] rotating to position T
[Status 01:49:16 INFO] .SET file for ACQ96 ready
[Ingest 01:49:16 INFO] Starting acquisition
[Status 01:49:16 INFO] reading housekeeping
[Status 01:49:35 INFO] acquire complete
[Status 01:49:35 INFO] writing housekeeping
[Sequencer 01:49:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:49:35 INFO] incremented T scene to 34 completed views
[Sequencer 01:49:35 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:49:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:49:35 INFO] incremented to [AERI set: name U34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:49:35 INFO] T34.SIG(18)
[sigmove 01:49:35 DEBUG] transformed T34Ma.SPC -> T34MA.SPC
[sigmove 01:49:35 DEBUG] transformed T34Mb.SPC -> T34MB.SPC
[sigmove 01:49:35 DEBUG] transformed T34Mc.SPC -> T34MC.SPC
[sigmove 01:49:35 DEBUG] transformed T34Md.SPC -> T34MD.SPC
[sigmove 01:49:35 DEBUG] transformed T34Me.SPC -> T34ME.SPC
[sigmove 01:49:35 DEBUG] transformed T34Mf.SPC -> T34MF.SPC
[Status 01:49:35 INFO] data for T34 transferred to science data processing
[Tidy 01:49:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:49:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:49:35 INFO] resetting WatchDogTimer
[Status 01:49:35 INFO] Starting Set [AERI set: name U34, 6 scans, 0 angle, D16300 command]
[Ingest 01:49:35 INFO] Sending XML status message
[Status 01:49:35 INFO] Mirror angle: 0
[Mirror 01:49:36 INFO] rotating to position U
[Status 01:49:36 INFO] .SET file for ACQ96 ready
[Ingest 01:49:36 INFO] Starting acquisition
[Status 01:49:36 INFO] reading housekeeping
[Status 01:49:54 INFO] acquire complete
[Status 01:49:54 INFO] writing housekeeping
[Sequencer 01:49:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:49:54 INFO] incremented U scene to 34 completed views
[Sequencer 01:49:54 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:49:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:49:54 INFO] incremented to [AERI set: name V34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:49:54 INFO] U34.SIG(18)
[sigmove 01:49:54 DEBUG] transformed U34Ma.SPC -> U34MA.SPC
[sigmove 01:49:54 DEBUG] transformed U34Mb.SPC -> U34MB.SPC
[sigmove 01:49:54 DEBUG] transformed U34Mc.SPC -> U34MC.SPC
[sigmove 01:49:54 DEBUG] transformed U34Md.SPC -> U34MD.SPC
[sigmove 01:49:54 DEBUG] transformed U34Me.SPC -> U34ME.SPC
[sigmove 01:49:54 DEBUG] transformed U34Mf.SPC -> U34MF.SPC
[Status 01:49:54 INFO] data for U34 transferred to science data processing
[Tidy 01:49:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:49:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:49:54 INFO] resetting WatchDogTimer
[Status 01:49:54 INFO] Starting Set [AERI set: name V34, 6 scans, 0 angle, D16300 command]
[Ingest 01:49:54 INFO] Sending XML status message
[Status 01:49:54 INFO] Mirror angle: 0
[Mirror 01:49:54 INFO] rotating to position V
[Status 01:49:54 INFO] .SET file for ACQ96 ready
[Ingest 01:49:55 INFO] Starting acquisition
[Status 01:49:55 INFO] reading housekeeping
[Status 01:50:13 INFO] acquire complete
[Status 01:50:13 INFO] writing housekeeping
[Sequencer 01:50:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:50:13 INFO] incremented V scene to 34 completed views
[Sequencer 01:50:13 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:50:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:50:13 INFO] incremented to [AERI set: name W34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:50:13 INFO] V34.SIG(18)
[sigmove 01:50:13 DEBUG] transformed V34Ma.SPC -> V34MA.SPC
[sigmove 01:50:13 DEBUG] transformed V34Mb.SPC -> V34MB.SPC
[sigmove 01:50:13 DEBUG] transformed V34Mc.SPC -> V34MC.SPC
[sigmove 01:50:13 DEBUG] transformed V34Md.SPC -> V34MD.SPC
[sigmove 01:50:13 DEBUG] transformed V34Me.SPC -> V34ME.SPC
[sigmove 01:50:13 DEBUG] transformed V34Mf.SPC -> V34MF.SPC
[Status 01:50:13 INFO] data for V34 transferred to science data processing
[Tidy 01:50:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:50:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:50:13 INFO] resetting WatchDogTimer
[Status 01:50:13 INFO] Starting Set [AERI set: name W34, 6 scans, 0 angle, D16300 command]
[Ingest 01:50:13 INFO] Sending XML status message
[Status 01:50:13 INFO] Mirror angle: 0
[Mirror 01:50:13 INFO] rotating to position W
[Status 01:50:14 INFO] .SET file for ACQ96 ready
[Ingest 01:50:14 INFO] Starting acquisition
[Status 01:50:14 INFO] reading housekeeping
[Status 01:50:32 INFO] acquire complete
[Status 01:50:32 INFO] writing housekeeping
[Sequencer 01:50:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:50:32 INFO] incremented W scene to 34 completed views
[Sequencer 01:50:32 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:50:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:50:32 INFO] incremented to [AERI set: name X34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:50:32 INFO] W34.SIG(18)
[sigmove 01:50:32 DEBUG] transformed W34Ma.SPC -> W34MA.SPC
[sigmove 01:50:32 DEBUG] transformed W34Mb.SPC -> W34MB.SPC
[sigmove 01:50:32 DEBUG] transformed W34Mc.SPC -> W34MC.SPC
[sigmove 01:50:32 DEBUG] transformed W34Md.SPC -> W34MD.SPC
[sigmove 01:50:32 DEBUG] transformed W34Me.SPC -> W34ME.SPC
[sigmove 01:50:32 DEBUG] transformed W34Mf.SPC -> W34MF.SPC
[Status 01:50:32 INFO] data for W34 transferred to science data processing
[Tidy 01:50:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:50:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:50:32 INFO] resetting WatchDogTimer
[Status 01:50:32 INFO] Starting Set [AERI set: name X34, 6 scans, 0 angle, D16300 command]
[Ingest 01:50:32 INFO] Sending XML status message
[Status 01:50:32 INFO] Mirror angle: 0
[Mirror 01:50:32 INFO] rotating to position X
[Status 01:50:33 INFO] .SET file for ACQ96 ready
[Ingest 01:50:33 INFO] Starting acquisition
[Status 01:50:33 INFO] reading housekeeping
[Status 01:50:51 INFO] acquire complete
[Status 01:50:52 INFO] writing housekeeping
[Sequencer 01:50:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:50:52 INFO] incremented X scene to 34 completed views
[Sequencer 01:50:52 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:50:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:50:52 INFO] incremented to [AERI set: name Y34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:50:52 INFO] X34.SIG(18)
[sigmove 01:50:52 DEBUG] transformed X34Ma.SPC -> X34MA.SPC
[sigmove 01:50:52 DEBUG] transformed X34Mb.SPC -> X34MB.SPC
[sigmove 01:50:52 DEBUG] transformed X34Mc.SPC -> X34MC.SPC
[sigmove 01:50:52 DEBUG] transformed X34Md.SPC -> X34MD.SPC
[sigmove 01:50:52 DEBUG] transformed X34Me.SPC -> X34ME.SPC
[sigmove 01:50:52 DEBUG] transformed X34Mf.SPC -> X34MF.SPC
[Status 01:50:52 INFO] data for X34 transferred to science data processing
[Tidy 01:50:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:50:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:50:52 INFO] resetting WatchDogTimer
[Status 01:50:52 INFO] Starting Set [AERI set: name Y34, 6 scans, 0 angle, D16300 command]
[Ingest 01:50:52 INFO] Sending XML status message
[Status 01:50:52 INFO] Mirror angle: 0
[Mirror 01:50:52 INFO] rotating to position Y
[Status 01:50:52 INFO] .SET file for ACQ96 ready
[Ingest 01:50:52 INFO] Starting acquisition
[Status 01:50:52 INFO] reading housekeeping
[Status 01:51:10 INFO] acquire complete
[Status 01:51:10 INFO] writing housekeeping
[Sequencer 01:51:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:51:10 INFO] incremented Y scene to 34 completed views
[Sequencer 01:51:10 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:51:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:51:10 INFO] incremented to [AERI set: name Z34, 6 scans, 0 angle, D16300 command] set
[sigmove 01:51:10 INFO] Y34.SIG(18)
[sigmove 01:51:10 DEBUG] transformed Y34Ma.SPC -> Y34MA.SPC
[sigmove 01:51:10 DEBUG] transformed Y34Mb.SPC -> Y34MB.SPC
[sigmove 01:51:10 DEBUG] transformed Y34Mc.SPC -> Y34MC.SPC
[sigmove 01:51:10 DEBUG] transformed Y34Md.SPC -> Y34MD.SPC
[sigmove 01:51:10 DEBUG] transformed Y34Me.SPC -> Y34ME.SPC
[sigmove 01:51:10 DEBUG] transformed Y34Mf.SPC -> Y34MF.SPC
[Status 01:51:10 INFO] data for Y34 transferred to science data processing
[Tidy 01:51:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:51:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:51:10 INFO] resetting WatchDogTimer
[Status 01:51:11 INFO] Starting Set [AERI set: name Z34, 6 scans, 0 angle, D16300 command]
[Ingest 01:51:11 INFO] Sending XML status message
[Status 01:51:11 INFO] Mirror angle: 0
[Mirror 01:51:11 INFO] rotating to position Z
[Status 01:51:11 INFO] .SET file for ACQ96 ready
[Ingest 01:51:11 INFO] Starting acquisition
[Status 01:51:11 INFO] reading housekeeping
[Status 01:51:29 INFO] acquire complete
[Status 01:51:30 INFO] writing housekeeping
[Sequencer 01:51:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:51:30 INFO] incremented Z scene to 34 completed views
[Sequencer 01:51:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:51:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:51:30 INFO] incremented to [AERI set: name H35, 6 scans, 60 angle, D22500 command] set
[sigmove 01:51:30 INFO] Z34.SIG(18)
[sigmove 01:51:30 DEBUG] transformed Z34Ma.SPC -> Z34MA.SPC
[sigmove 01:51:30 DEBUG] transformed Z34Mb.SPC -> Z34MB.SPC
[sigmove 01:51:30 DEBUG] transformed Z34Mc.SPC -> Z34MC.SPC
[sigmove 01:51:30 DEBUG] transformed Z34Md.SPC -> Z34MD.SPC
[sigmove 01:51:30 DEBUG] transformed Z34Me.SPC -> Z34ME.SPC
[sigmove 01:51:30 DEBUG] transformed Z34Mf.SPC -> Z34MF.SPC
[Status 01:51:30 INFO] data for Z34 transferred to science data processing
[Tidy 01:51:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:51:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:51:30 INFO] resetting WatchDogTimer
[Status 01:51:30 INFO] Starting Set [AERI set: name H35, 6 scans, 60 angle, D22500 command]
[Ingest 01:51:30 INFO] Sending XML status message
[Status 01:51:30 INFO] Mirror angle: 60
[Mirror 01:51:30 INFO] rotating to position H
[Status 01:51:30 INFO] .SET file for ACQ96 ready
[Ingest 01:51:31 INFO] Starting acquisition
[Status 01:51:31 INFO] reading housekeeping
[Status 01:51:48 INFO] acquire complete
[Status 01:51:49 INFO] writing housekeeping
[Sequencer 01:51:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:51:49 INFO] incremented H scene to 35 completed views
[Sequencer 01:51:49 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:51:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:51:49 INFO] incremented to [AERI set: name A35, 6 scans, 120 angle, D28300 command] set
[sigmove 01:51:49 INFO] H35.SIG(18)
[sigmove 01:51:49 DEBUG] transformed H35Ma.SPC -> H35MA.SPC
[sigmove 01:51:49 DEBUG] transformed H35Mb.SPC -> H35MB.SPC
[sigmove 01:51:49 DEBUG] transformed H35Mc.SPC -> H35MC.SPC
[sigmove 01:51:49 DEBUG] transformed H35Md.SPC -> H35MD.SPC
[sigmove 01:51:49 DEBUG] transformed H35Me.SPC -> H35ME.SPC
[sigmove 01:51:49 DEBUG] transformed H35Mf.SPC -> H35MF.SPC
[Status 01:51:49 INFO] data for H35 transferred to science data processing
[Tidy 01:51:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:51:49 INFO] A33.FIN(19),H33.FIN(19),S33.FIN(19),T33.FIN(19),U33.FIN(19),V33.FIN(19),W33.FIN(19),X33.FIN(19),Y33.FIN(19),Z33.FIN(19),A34.FIN(19),H34.FIN(19),S34.FIN(19),T34.FIN(19),U34.FIN(19),V34.FIN(19),W34.FIN(19),X34.FIN(19),Y34.FIN(19),Z34.FIN(19)
[sigmove 01:51:49 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:51:49 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:51:50 DEBUG] done zipping
[WatchDog 01:51:50 INFO] resetting WatchDogTimer
[Status 01:51:50 INFO] Starting Set [AERI set: name A35, 6 scans, 120 angle, D28300 command]
[Ingest 01:51:50 INFO] Sending XML status message
[Status 01:51:50 INFO] Mirror angle: 120
[Mirror 01:51:50 INFO] rotating to position A
[Status 01:51:51 INFO] .SET file for ACQ96 ready
[Ingest 01:51:51 INFO] Starting acquisition
[Status 01:51:51 INFO] reading housekeeping
[Status 01:52:08 INFO] acquire complete
[Status 01:52:09 INFO] writing housekeeping
[Sequencer 01:52:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:52:09 INFO] incremented A scene to 35 completed views
[Sequencer 01:52:09 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:52:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:52:09 INFO] incremented to [AERI set: name S35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:52:09 INFO] A35.SIG(18)
[sigmove 01:52:09 DEBUG] transformed A35Ma.SPC -> A35MA.SPC
[sigmove 01:52:09 DEBUG] transformed A35Mb.SPC -> A35MB.SPC
[sigmove 01:52:09 DEBUG] transformed A35Mc.SPC -> A35MC.SPC
[sigmove 01:52:09 DEBUG] transformed A35Md.SPC -> A35MD.SPC
[sigmove 01:52:09 DEBUG] transformed A35Me.SPC -> A35ME.SPC
[sigmove 01:52:09 DEBUG] transformed A35Mf.SPC -> A35MF.SPC
[Status 01:52:09 INFO] data for A35 transferred to science data processing
[Tidy 01:52:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:52:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:52:09 INFO] resetting WatchDogTimer
[Status 01:52:09 INFO] Starting Set [AERI set: name S35, 6 scans, 0 angle, D16300 command]
[Ingest 01:52:09 INFO] Sending XML status message
[Status 01:52:09 INFO] Mirror angle: 0
[Mirror 01:52:09 INFO] rotating to position S
[Status 01:52:10 INFO] .SET file for ACQ96 ready
[Ingest 01:52:10 INFO] Starting acquisition
[Status 01:52:10 INFO] reading housekeeping
[Status 01:52:29 INFO] acquire complete
[Status 01:52:29 INFO] writing housekeeping
[Sequencer 01:52:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:52:29 INFO] incremented S scene to 35 completed views
[Sequencer 01:52:29 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:52:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:52:29 INFO] incremented to [AERI set: name T35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:52:29 INFO] S35.SIG(18)
[sigmove 01:52:29 DEBUG] transformed S35Ma.SPC -> S35MA.SPC
[sigmove 01:52:29 DEBUG] transformed S35Mb.SPC -> S35MB.SPC
[sigmove 01:52:29 DEBUG] transformed S35Mc.SPC -> S35MC.SPC
[sigmove 01:52:29 DEBUG] transformed S35Md.SPC -> S35MD.SPC
[sigmove 01:52:29 DEBUG] transformed S35Me.SPC -> S35ME.SPC
[sigmove 01:52:29 DEBUG] transformed S35Mf.SPC -> S35MF.SPC
[Status 01:52:29 INFO] data for S35 transferred to science data processing
[Tidy 01:52:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:52:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:52:29 INFO] resetting WatchDogTimer
[Status 01:52:29 INFO] Starting Set [AERI set: name T35, 6 scans, 0 angle, D16300 command]
[Ingest 01:52:29 INFO] Sending XML status message
[Status 01:52:29 INFO] Mirror angle: 0
[Mirror 01:52:29 INFO] rotating to position T
[Status 01:52:30 INFO] .SET file for ACQ96 ready
[Ingest 01:52:30 INFO] Starting acquisition
[Status 01:52:30 INFO] reading housekeeping
[Status 01:52:48 INFO] acquire complete
[Status 01:52:48 INFO] writing housekeeping
[Sequencer 01:52:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:52:48 INFO] incremented T scene to 35 completed views
[Sequencer 01:52:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:52:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:52:48 INFO] incremented to [AERI set: name U35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:52:48 INFO] T35.SIG(18)
[sigmove 01:52:48 DEBUG] transformed T35Ma.SPC -> T35MA.SPC
[sigmove 01:52:48 DEBUG] transformed T35Mb.SPC -> T35MB.SPC
[sigmove 01:52:48 DEBUG] transformed T35Mc.SPC -> T35MC.SPC
[sigmove 01:52:48 DEBUG] transformed T35Md.SPC -> T35MD.SPC
[sigmove 01:52:48 DEBUG] transformed T35Me.SPC -> T35ME.SPC
[sigmove 01:52:48 DEBUG] transformed T35Mf.SPC -> T35MF.SPC
[Status 01:52:48 INFO] data for T35 transferred to science data processing
[Tidy 01:52:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:52:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:52:48 INFO] resetting WatchDogTimer
[Status 01:52:48 INFO] Starting Set [AERI set: name U35, 6 scans, 0 angle, D16300 command]
[Ingest 01:52:48 INFO] Sending XML status message
[Status 01:52:48 INFO] Mirror angle: 0
[Mirror 01:52:48 INFO] rotating to position U
[Status 01:52:49 INFO] .SET file for ACQ96 ready
[Ingest 01:52:49 INFO] Starting acquisition
[Status 01:52:49 INFO] reading housekeeping
[Status 01:53:07 INFO] acquire complete
[Status 01:53:08 INFO] writing housekeeping
[Sequencer 01:53:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:53:08 INFO] incremented U scene to 35 completed views
[Sequencer 01:53:08 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:53:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:53:08 INFO] incremented to [AERI set: name V35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:53:08 INFO] U35.SIG(18)
[sigmove 01:53:08 DEBUG] transformed U35Ma.SPC -> U35MA.SPC
[sigmove 01:53:08 DEBUG] transformed U35Mb.SPC -> U35MB.SPC
[sigmove 01:53:08 DEBUG] transformed U35Mc.SPC -> U35MC.SPC
[sigmove 01:53:08 DEBUG] transformed U35Md.SPC -> U35MD.SPC
[sigmove 01:53:08 DEBUG] transformed U35Me.SPC -> U35ME.SPC
[sigmove 01:53:08 DEBUG] transformed U35Mf.SPC -> U35MF.SPC
[Status 01:53:08 INFO] data for U35 transferred to science data processing
[Tidy 01:53:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:53:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:53:08 INFO] resetting WatchDogTimer
[Status 01:53:08 INFO] Starting Set [AERI set: name V35, 6 scans, 0 angle, D16300 command]
[Ingest 01:53:08 INFO] Sending XML status message
[Status 01:53:08 INFO] Mirror angle: 0
[Mirror 01:53:08 INFO] rotating to position V
[Status 01:53:08 INFO] .SET file for ACQ96 ready
[Ingest 01:53:08 INFO] Starting acquisition
[Status 01:53:08 INFO] reading housekeeping
[Status 01:53:26 INFO] acquire complete
[Status 01:53:26 INFO] writing housekeeping
[Sequencer 01:53:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:53:26 INFO] incremented V scene to 35 completed views
[Sequencer 01:53:26 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:53:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:53:26 INFO] incremented to [AERI set: name W35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:53:26 INFO] V35.SIG(18)
[sigmove 01:53:26 DEBUG] transformed V35Ma.SPC -> V35MA.SPC
[sigmove 01:53:26 DEBUG] transformed V35Mb.SPC -> V35MB.SPC
[sigmove 01:53:26 DEBUG] transformed V35Mc.SPC -> V35MC.SPC
[sigmove 01:53:26 DEBUG] transformed V35Md.SPC -> V35MD.SPC
[sigmove 01:53:26 DEBUG] transformed V35Me.SPC -> V35ME.SPC
[sigmove 01:53:26 DEBUG] transformed V35Mf.SPC -> V35MF.SPC
[Status 01:53:26 INFO] data for V35 transferred to science data processing
[Tidy 01:53:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:53:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:53:26 INFO] resetting WatchDogTimer
[Status 01:53:26 INFO] Starting Set [AERI set: name W35, 6 scans, 0 angle, D16300 command]
[Ingest 01:53:26 INFO] Sending XML status message
[Status 01:53:26 INFO] Mirror angle: 0
[Mirror 01:53:27 INFO] rotating to position W
[Status 01:53:27 INFO] .SET file for ACQ96 ready
[Ingest 01:53:27 INFO] Starting acquisition
[Status 01:53:27 INFO] reading housekeeping
[Status 01:53:45 INFO] acquire complete
[Status 01:53:45 INFO] writing housekeeping
[Sequencer 01:53:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:53:45 INFO] incremented W scene to 35 completed views
[Sequencer 01:53:45 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:53:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:53:45 INFO] incremented to [AERI set: name X35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:53:45 INFO] W35.SIG(18)
[sigmove 01:53:45 DEBUG] transformed W35Ma.SPC -> W35MA.SPC
[sigmove 01:53:45 DEBUG] transformed W35Mb.SPC -> W35MB.SPC
[sigmove 01:53:45 DEBUG] transformed W35Mc.SPC -> W35MC.SPC
[sigmove 01:53:45 DEBUG] transformed W35Md.SPC -> W35MD.SPC
[sigmove 01:53:45 DEBUG] transformed W35Me.SPC -> W35ME.SPC
[sigmove 01:53:45 DEBUG] transformed W35Mf.SPC -> W35MF.SPC
[Status 01:53:45 INFO] data for W35 transferred to science data processing
[Tidy 01:53:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:53:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:53:45 INFO] resetting WatchDogTimer
[Status 01:53:45 INFO] Starting Set [AERI set: name X35, 6 scans, 0 angle, D16300 command]
[Ingest 01:53:45 INFO] Sending XML status message
[Status 01:53:45 INFO] Mirror angle: 0
[Mirror 01:53:46 INFO] rotating to position X
[Status 01:53:46 INFO] .SET file for ACQ96 ready
[Ingest 01:53:46 INFO] Starting acquisition
[Status 01:53:46 INFO] reading housekeeping
[Status 01:54:04 INFO] acquire complete
[Status 01:54:04 INFO] writing housekeeping
[Sequencer 01:54:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:54:05 INFO] incremented X scene to 35 completed views
[Sequencer 01:54:05 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:54:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:54:05 INFO] incremented to [AERI set: name Y35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:54:05 INFO] X35.SIG(18)
[sigmove 01:54:05 DEBUG] transformed X35Ma.SPC -> X35MA.SPC
[sigmove 01:54:05 DEBUG] transformed X35Mb.SPC -> X35MB.SPC
[sigmove 01:54:05 DEBUG] transformed X35Mc.SPC -> X35MC.SPC
[sigmove 01:54:05 DEBUG] transformed X35Md.SPC -> X35MD.SPC
[sigmove 01:54:05 DEBUG] transformed X35Me.SPC -> X35ME.SPC
[sigmove 01:54:05 DEBUG] transformed X35Mf.SPC -> X35MF.SPC
[Status 01:54:05 INFO] data for X35 transferred to science data processing
[Tidy 01:54:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:54:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:54:05 INFO] resetting WatchDogTimer
[Status 01:54:05 INFO] Starting Set [AERI set: name Y35, 6 scans, 0 angle, D16300 command]
[Ingest 01:54:05 INFO] Sending XML status message
[Status 01:54:05 INFO] Mirror angle: 0
[Mirror 01:54:05 INFO] rotating to position Y
[Status 01:54:05 INFO] .SET file for ACQ96 ready
[Ingest 01:54:05 INFO] Starting acquisition
[Status 01:54:05 INFO] reading housekeeping
[Status 01:54:23 INFO] acquire complete
[Status 01:54:24 INFO] writing housekeeping
[Sequencer 01:54:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:54:24 INFO] incremented Y scene to 35 completed views
[Sequencer 01:54:24 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:54:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:54:24 INFO] incremented to [AERI set: name Z35, 6 scans, 0 angle, D16300 command] set
[sigmove 01:54:24 INFO] Y35.SIG(18)
[sigmove 01:54:24 DEBUG] transformed Y35Ma.SPC -> Y35MA.SPC
[sigmove 01:54:24 DEBUG] transformed Y35Mb.SPC -> Y35MB.SPC
[sigmove 01:54:24 DEBUG] transformed Y35Mc.SPC -> Y35MC.SPC
[sigmove 01:54:24 DEBUG] transformed Y35Md.SPC -> Y35MD.SPC
[sigmove 01:54:24 DEBUG] transformed Y35Me.SPC -> Y35ME.SPC
[sigmove 01:54:24 DEBUG] transformed Y35Mf.SPC -> Y35MF.SPC
[Status 01:54:24 INFO] data for Y35 transferred to science data processing
[Tidy 01:54:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:54:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:54:24 INFO] resetting WatchDogTimer
[Status 01:54:24 INFO] Starting Set [AERI set: name Z35, 6 scans, 0 angle, D16300 command]
[Ingest 01:54:24 INFO] Sending XML status message
[Status 01:54:24 INFO] Mirror angle: 0
[Mirror 01:54:24 INFO] rotating to position Z
[Status 01:54:24 INFO] .SET file for ACQ96 ready
[Ingest 01:54:24 INFO] Starting acquisition
[Status 01:54:24 INFO] reading housekeeping
[Status 01:54:42 INFO] acquire complete
[Status 01:54:43 INFO] writing housekeeping
[Sequencer 01:54:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:54:43 INFO] incremented Z scene to 35 completed views
[Sequencer 01:54:43 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:54:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:54:43 INFO] incremented to [AERI set: name A36, 6 scans, 120 angle, D28300 command] set
[sigmove 01:54:43 INFO] Z35.SIG(18)
[sigmove 01:54:43 DEBUG] transformed Z35Ma.SPC -> Z35MA.SPC
[sigmove 01:54:43 DEBUG] transformed Z35Mb.SPC -> Z35MB.SPC
[sigmove 01:54:43 DEBUG] transformed Z35Mc.SPC -> Z35MC.SPC
[sigmove 01:54:43 DEBUG] transformed Z35Md.SPC -> Z35MD.SPC
[sigmove 01:54:43 DEBUG] transformed Z35Me.SPC -> Z35ME.SPC
[sigmove 01:54:43 DEBUG] transformed Z35Mf.SPC -> Z35MF.SPC
[Status 01:54:43 INFO] data for Z35 transferred to science data processing
[Tidy 01:54:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:54:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:54:43 INFO] resetting WatchDogTimer
[Status 01:54:43 INFO] Starting Set [AERI set: name A36, 6 scans, 120 angle, D28300 command]
[Ingest 01:54:43 INFO] Sending XML status message
[Status 01:54:43 INFO] Mirror angle: 120
[Mirror 01:54:43 INFO] rotating to position A
[Status 01:54:44 INFO] .SET file for ACQ96 ready
[Ingest 01:54:44 INFO] Starting acquisition
[Status 01:54:44 INFO] reading housekeeping
[Status 01:55:03 INFO] acquire complete
[Status 01:55:03 INFO] writing housekeeping
[Sequencer 01:55:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:55:03 INFO] incremented A scene to 36 completed views
[Sequencer 01:55:03 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:55:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:55:03 INFO] incremented to [AERI set: name H36, 6 scans, 60 angle, D22500 command] set
[sigmove 01:55:03 INFO] A36.SIG(18)
[sigmove 01:55:03 DEBUG] transformed A36Ma.SPC -> A36MA.SPC
[sigmove 01:55:03 DEBUG] transformed A36Mb.SPC -> A36MB.SPC
[sigmove 01:55:03 DEBUG] transformed A36Mc.SPC -> A36MC.SPC
[sigmove 01:55:03 DEBUG] transformed A36Md.SPC -> A36MD.SPC
[sigmove 01:55:03 DEBUG] transformed A36Me.SPC -> A36ME.SPC
[sigmove 01:55:03 DEBUG] transformed A36Mf.SPC -> A36MF.SPC
[Status 01:55:03 INFO] data for A36 transferred to science data processing
[Tidy 01:55:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:55:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:55:03 INFO] resetting WatchDogTimer
[Status 01:55:03 INFO] Starting Set [AERI set: name H36, 6 scans, 60 angle, D22500 command]
[Ingest 01:55:03 INFO] Sending XML status message
[Status 01:55:03 INFO] Mirror angle: 60
[Mirror 01:55:03 INFO] rotating to position H
[Status 01:55:04 INFO] .SET file for ACQ96 ready
[Ingest 01:55:04 INFO] Starting acquisition
[Status 01:55:04 INFO] reading housekeeping
[Status 01:55:22 INFO] acquire complete
[Status 01:55:22 INFO] writing housekeeping
[Sequencer 01:55:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:55:22 INFO] incremented H scene to 36 completed views
[Sequencer 01:55:22 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:55:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:55:22 INFO] incremented to [AERI set: name S36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:55:22 INFO] H36.SIG(18)
[sigmove 01:55:22 DEBUG] transformed H36Ma.SPC -> H36MA.SPC
[sigmove 01:55:22 DEBUG] transformed H36Mb.SPC -> H36MB.SPC
[sigmove 01:55:22 DEBUG] transformed H36Mc.SPC -> H36MC.SPC
[sigmove 01:55:22 DEBUG] transformed H36Md.SPC -> H36MD.SPC
[sigmove 01:55:22 DEBUG] transformed H36Me.SPC -> H36ME.SPC
[sigmove 01:55:22 DEBUG] transformed H36Mf.SPC -> H36MF.SPC
[Status 01:55:22 INFO] data for H36 transferred to science data processing
[Tidy 01:55:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:55:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:55:22 INFO] resetting WatchDogTimer
[Status 01:55:22 INFO] Starting Set [AERI set: name S36, 6 scans, 0 angle, D16300 command]
[Ingest 01:55:22 INFO] Sending XML status message
[Status 01:55:22 INFO] Mirror angle: 0
[Mirror 01:55:22 INFO] rotating to position S
[Status 01:55:23 INFO] .SET file for ACQ96 ready
[Ingest 01:55:23 INFO] Starting acquisition
[Status 01:55:23 INFO] reading housekeeping
[Status 01:55:41 INFO] acquire complete
[Status 01:55:41 INFO] writing housekeeping
[Sequencer 01:55:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:55:41 INFO] incremented S scene to 36 completed views
[Sequencer 01:55:41 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:55:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:55:41 INFO] incremented to [AERI set: name T36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:55:41 INFO] S36.SIG(18)
[sigmove 01:55:41 DEBUG] transformed S36Ma.SPC -> S36MA.SPC
[sigmove 01:55:41 DEBUG] transformed S36Mb.SPC -> S36MB.SPC
[sigmove 01:55:41 DEBUG] transformed S36Mc.SPC -> S36MC.SPC
[sigmove 01:55:41 DEBUG] transformed S36Md.SPC -> S36MD.SPC
[sigmove 01:55:41 DEBUG] transformed S36Me.SPC -> S36ME.SPC
[sigmove 01:55:41 DEBUG] transformed S36Mf.SPC -> S36MF.SPC
[Status 01:55:41 INFO] data for S36 transferred to science data processing
[Tidy 01:55:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:55:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:55:41 INFO] resetting WatchDogTimer
[Status 01:55:41 INFO] Starting Set [AERI set: name T36, 6 scans, 0 angle, D16300 command]
[Ingest 01:55:41 INFO] Sending XML status message
[Status 01:55:41 INFO] Mirror angle: 0
[Mirror 01:55:41 INFO] rotating to position T
[Status 01:55:41 INFO] .SET file for ACQ96 ready
[Ingest 01:55:41 INFO] Starting acquisition
[Status 01:55:42 INFO] reading housekeeping
[Status 01:56:00 INFO] acquire complete
[Status 01:56:01 INFO] writing housekeeping
[Sequencer 01:56:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:56:01 INFO] incremented T scene to 36 completed views
[Sequencer 01:56:01 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:56:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:56:01 INFO] incremented to [AERI set: name U36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:56:01 INFO] T36.SIG(18)
[sigmove 01:56:01 DEBUG] transformed T36Ma.SPC -> T36MA.SPC
[sigmove 01:56:01 DEBUG] transformed T36Mb.SPC -> T36MB.SPC
[sigmove 01:56:01 DEBUG] transformed T36Mc.SPC -> T36MC.SPC
[sigmove 01:56:01 DEBUG] transformed T36Md.SPC -> T36MD.SPC
[sigmove 01:56:01 DEBUG] transformed T36Me.SPC -> T36ME.SPC
[sigmove 01:56:01 DEBUG] transformed T36Mf.SPC -> T36MF.SPC
[Status 01:56:01 INFO] data for T36 transferred to science data processing
[Tidy 01:56:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:56:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:56:01 INFO] resetting WatchDogTimer
[Status 01:56:01 INFO] Starting Set [AERI set: name U36, 6 scans, 0 angle, D16300 command]
[Ingest 01:56:01 INFO] Sending XML status message
[Status 01:56:01 INFO] Mirror angle: 0
[Mirror 01:56:01 INFO] rotating to position U
[Status 01:56:01 INFO] .SET file for ACQ96 ready
[Ingest 01:56:01 INFO] Starting acquisition
[Status 01:56:02 INFO] reading housekeeping
[Status 01:56:20 INFO] acquire complete
[Status 01:56:20 INFO] writing housekeeping
[Sequencer 01:56:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:56:20 INFO] incremented U scene to 36 completed views
[Sequencer 01:56:20 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:56:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:56:20 INFO] incremented to [AERI set: name V36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:56:20 INFO] U36.SIG(18)
[sigmove 01:56:20 DEBUG] transformed U36Ma.SPC -> U36MA.SPC
[sigmove 01:56:20 DEBUG] transformed U36Mb.SPC -> U36MB.SPC
[sigmove 01:56:20 DEBUG] transformed U36Mc.SPC -> U36MC.SPC
[sigmove 01:56:20 DEBUG] transformed U36Md.SPC -> U36MD.SPC
[sigmove 01:56:20 DEBUG] transformed U36Me.SPC -> U36ME.SPC
[sigmove 01:56:20 DEBUG] transformed U36Mf.SPC -> U36MF.SPC
[Status 01:56:20 INFO] data for U36 transferred to science data processing
[Tidy 01:56:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:56:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:56:20 INFO] resetting WatchDogTimer
[Status 01:56:20 INFO] Starting Set [AERI set: name V36, 6 scans, 0 angle, D16300 command]
[Ingest 01:56:20 INFO] Sending XML status message
[Status 01:56:20 INFO] Mirror angle: 0
[Mirror 01:56:21 INFO] rotating to position V
[Status 01:56:21 INFO] .SET file for ACQ96 ready
[Ingest 01:56:21 INFO] Starting acquisition
[Status 01:56:21 INFO] reading housekeeping
[Status 01:56:39 INFO] acquire complete
[Status 01:56:39 INFO] writing housekeeping
[Sequencer 01:56:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:56:39 INFO] incremented V scene to 36 completed views
[Sequencer 01:56:39 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:56:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:56:39 INFO] incremented to [AERI set: name W36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:56:39 INFO] V36.SIG(18)
[sigmove 01:56:39 DEBUG] transformed V36Ma.SPC -> V36MA.SPC
[sigmove 01:56:39 DEBUG] transformed V36Mb.SPC -> V36MB.SPC
[sigmove 01:56:39 DEBUG] transformed V36Mc.SPC -> V36MC.SPC
[sigmove 01:56:39 DEBUG] transformed V36Md.SPC -> V36MD.SPC
[sigmove 01:56:39 DEBUG] transformed V36Me.SPC -> V36ME.SPC
[sigmove 01:56:39 DEBUG] transformed V36Mf.SPC -> V36MF.SPC
[Status 01:56:39 INFO] data for V36 transferred to science data processing
[Tidy 01:56:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:56:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:56:39 INFO] resetting WatchDogTimer
[Status 01:56:40 INFO] Starting Set [AERI set: name W36, 6 scans, 0 angle, D16300 command]
[Ingest 01:56:40 INFO] Sending XML status message
[Status 01:56:40 INFO] Mirror angle: 0
[Mirror 01:56:40 INFO] rotating to position W
[Status 01:56:40 INFO] .SET file for ACQ96 ready
[Ingest 01:56:40 INFO] Starting acquisition
[Status 01:56:40 INFO] reading housekeeping
[Status 01:56:58 INFO] acquire complete
[Status 01:56:58 INFO] writing housekeeping
[Sequencer 01:56:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:56:58 INFO] incremented W scene to 36 completed views
[Sequencer 01:56:58 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:56:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:56:58 INFO] incremented to [AERI set: name X36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:56:58 INFO] W36.SIG(18)
[sigmove 01:56:59 DEBUG] transformed W36Ma.SPC -> W36MA.SPC
[sigmove 01:56:59 DEBUG] transformed W36Mb.SPC -> W36MB.SPC
[sigmove 01:56:59 DEBUG] transformed W36Mc.SPC -> W36MC.SPC
[sigmove 01:56:59 DEBUG] transformed W36Md.SPC -> W36MD.SPC
[sigmove 01:56:59 DEBUG] transformed W36Me.SPC -> W36ME.SPC
[sigmove 01:56:59 DEBUG] transformed W36Mf.SPC -> W36MF.SPC
[Status 01:56:59 INFO] data for W36 transferred to science data processing
[Tidy 01:56:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:56:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:56:59 INFO] resetting WatchDogTimer
[Status 01:56:59 INFO] Starting Set [AERI set: name X36, 6 scans, 0 angle, D16300 command]
[Ingest 01:56:59 INFO] Sending XML status message
[Status 01:56:59 INFO] Mirror angle: 0
[Mirror 01:56:59 INFO] rotating to position X
[Status 01:56:59 INFO] .SET file for ACQ96 ready
[Ingest 01:56:59 INFO] Starting acquisition
[Status 01:56:59 INFO] reading housekeeping
[Status 01:57:17 INFO] acquire complete
[Status 01:57:18 INFO] writing housekeeping
[Sequencer 01:57:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:57:18 INFO] incremented X scene to 36 completed views
[Sequencer 01:57:18 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:57:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:57:18 INFO] incremented to [AERI set: name Y36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:57:18 INFO] X36.SIG(18)
[sigmove 01:57:18 DEBUG] transformed X36Ma.SPC -> X36MA.SPC
[sigmove 01:57:18 DEBUG] transformed X36Mb.SPC -> X36MB.SPC
[sigmove 01:57:18 DEBUG] transformed X36Mc.SPC -> X36MC.SPC
[sigmove 01:57:18 DEBUG] transformed X36Md.SPC -> X36MD.SPC
[sigmove 01:57:18 DEBUG] transformed X36Me.SPC -> X36ME.SPC
[sigmove 01:57:18 DEBUG] transformed X36Mf.SPC -> X36MF.SPC
[Status 01:57:18 INFO] data for X36 transferred to science data processing
[Tidy 01:57:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:57:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:57:18 INFO] resetting WatchDogTimer
[Status 01:57:18 INFO] Starting Set [AERI set: name Y36, 6 scans, 0 angle, D16300 command]
[Ingest 01:57:18 INFO] Sending XML status message
[Status 01:57:18 INFO] Mirror angle: 0
[Mirror 01:57:18 INFO] rotating to position Y
[Status 01:57:18 INFO] .SET file for ACQ96 ready
[Ingest 01:57:18 INFO] Starting acquisition
[Status 01:57:18 INFO] reading housekeeping
[Status 01:57:36 INFO] acquire complete
[Status 01:57:37 INFO] writing housekeeping
[Sequencer 01:57:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:57:37 INFO] incremented Y scene to 36 completed views
[Sequencer 01:57:37 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:57:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:57:37 INFO] incremented to [AERI set: name Z36, 6 scans, 0 angle, D16300 command] set
[sigmove 01:57:37 INFO] Y36.SIG(18)
[sigmove 01:57:37 DEBUG] transformed Y36Ma.SPC -> Y36MA.SPC
[sigmove 01:57:37 DEBUG] transformed Y36Mb.SPC -> Y36MB.SPC
[sigmove 01:57:37 DEBUG] transformed Y36Mc.SPC -> Y36MC.SPC
[sigmove 01:57:37 DEBUG] transformed Y36Md.SPC -> Y36MD.SPC
[sigmove 01:57:37 DEBUG] transformed Y36Me.SPC -> Y36ME.SPC
[sigmove 01:57:37 DEBUG] transformed Y36Mf.SPC -> Y36MF.SPC
[Status 01:57:37 INFO] data for Y36 transferred to science data processing
[Tidy 01:57:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:57:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:57:37 INFO] resetting WatchDogTimer
[Status 01:57:37 INFO] Starting Set [AERI set: name Z36, 6 scans, 0 angle, D16300 command]
[Ingest 01:57:37 INFO] Sending XML status message
[Status 01:57:37 INFO] Mirror angle: 0
[Mirror 01:57:37 INFO] rotating to position Z
[Status 01:57:37 INFO] .SET file for ACQ96 ready
[Ingest 01:57:37 INFO] Starting acquisition
[Status 01:57:37 INFO] reading housekeeping
[Status 01:57:55 INFO] acquire complete
[Status 01:57:56 INFO] writing housekeeping
[Sequencer 01:57:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:57:56 INFO] incremented Z scene to 36 completed views
[Sequencer 01:57:56 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 01:57:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:57:56 INFO] incremented to [AERI set: name H37, 6 scans, 60 angle, D22500 command] set
[sigmove 01:57:56 INFO] Z36.SIG(18)
[sigmove 01:57:56 DEBUG] transformed Z36Ma.SPC -> Z36MA.SPC
[sigmove 01:57:56 DEBUG] transformed Z36Mb.SPC -> Z36MB.SPC
[sigmove 01:57:56 DEBUG] transformed Z36Mc.SPC -> Z36MC.SPC
[sigmove 01:57:56 DEBUG] transformed Z36Md.SPC -> Z36MD.SPC
[sigmove 01:57:56 DEBUG] transformed Z36Me.SPC -> Z36ME.SPC
[sigmove 01:57:56 DEBUG] transformed Z36Mf.SPC -> Z36MF.SPC
[Status 01:57:56 INFO] data for Z36 transferred to science data processing
[Tidy 01:57:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:57:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:57:56 INFO] resetting WatchDogTimer
[Status 01:57:56 INFO] Starting Set [AERI set: name H37, 6 scans, 60 angle, D22500 command]
[Ingest 01:57:56 INFO] Sending XML status message
[Status 01:57:56 INFO] Mirror angle: 60
[Mirror 01:57:56 INFO] rotating to position H
[Status 01:57:57 INFO] .SET file for ACQ96 ready
[Ingest 01:57:57 INFO] Starting acquisition
[Status 01:57:57 INFO] reading housekeeping
[Status 01:58:14 INFO] acquire complete
[Status 01:58:15 INFO] writing housekeeping
[Sequencer 01:58:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:58:15 INFO] incremented H scene to 37 completed views
[Sequencer 01:58:15 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 01:58:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:58:15 INFO] incremented to [AERI set: name A37, 6 scans, 120 angle, D28300 command] set
[sigmove 01:58:15 INFO] H37.SIG(18)
[sigmove 01:58:15 DEBUG] transformed H37Ma.SPC -> H37MA.SPC
[sigmove 01:58:15 DEBUG] transformed H37Mb.SPC -> H37MB.SPC
[sigmove 01:58:15 DEBUG] transformed H37Mc.SPC -> H37MC.SPC
[sigmove 01:58:15 DEBUG] transformed H37Md.SPC -> H37MD.SPC
[sigmove 01:58:15 DEBUG] transformed H37Me.SPC -> H37ME.SPC
[sigmove 01:58:15 DEBUG] transformed H37Mf.SPC -> H37MF.SPC
[Status 01:58:15 INFO] data for H37 transferred to science data processing
[Tidy 01:58:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:58:15 INFO] A35.FIN(19),H35.FIN(19),S35.FIN(19),T35.FIN(19),U35.FIN(19),V35.FIN(19),W35.FIN(19),X35.FIN(19),Y35.FIN(19),Z35.FIN(19),A36.FIN(19),H36.FIN(19),S36.FIN(19),T36.FIN(19),U36.FIN(19),V36.FIN(19),W36.FIN(19),X36.FIN(19),Y36.FIN(19),Z36.FIN(19)
[sigmove 01:58:15 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:58:15 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 01:58:16 DEBUG] done zipping
[WatchDog 01:58:16 INFO] resetting WatchDogTimer
[Status 01:58:16 INFO] Starting Set [AERI set: name A37, 6 scans, 120 angle, D28300 command]
[Ingest 01:58:16 INFO] Sending XML status message
[Status 01:58:16 INFO] Mirror angle: 120
[Mirror 01:58:16 INFO] rotating to position A
[Status 01:58:17 INFO] .SET file for ACQ96 ready
[Ingest 01:58:17 INFO] Starting acquisition
[Status 01:58:17 INFO] reading housekeeping
[Status 01:58:35 INFO] acquire complete
[Status 01:58:35 INFO] writing housekeeping
[Sequencer 01:58:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:58:35 INFO] incremented A scene to 37 completed views
[Sequencer 01:58:35 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 01:58:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:58:35 INFO] incremented to [AERI set: name S37, 6 scans, 0 angle, D16300 command] set
[sigmove 01:58:35 INFO] A37.SIG(18)
[sigmove 01:58:35 DEBUG] transformed A37Ma.SPC -> A37MA.SPC
[sigmove 01:58:35 DEBUG] transformed A37Mb.SPC -> A37MB.SPC
[sigmove 01:58:35 DEBUG] transformed A37Mc.SPC -> A37MC.SPC
[sigmove 01:58:35 DEBUG] transformed A37Md.SPC -> A37MD.SPC
[sigmove 01:58:35 DEBUG] transformed A37Me.SPC -> A37ME.SPC
[sigmove 01:58:35 DEBUG] transformed A37Mf.SPC -> A37MF.SPC
[Status 01:58:35 INFO] data for A37 transferred to science data processing
[Tidy 01:58:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:58:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:58:35 INFO] resetting WatchDogTimer
[Status 01:58:35 INFO] Starting Set [AERI set: name S37, 6 scans, 0 angle, D16300 command]
[Ingest 01:58:35 INFO] Sending XML status message
[Status 01:58:35 INFO] Mirror angle: 0
[Mirror 01:58:35 INFO] rotating to position S
[Status 01:58:36 INFO] .SET file for ACQ96 ready
[Ingest 01:58:37 INFO] Starting acquisition
[Status 01:58:37 INFO] reading housekeeping
[Status 01:58:55 INFO] acquire complete
[Status 01:58:55 INFO] writing housekeeping
[Sequencer 01:58:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:58:55 INFO] incremented S scene to 37 completed views
[Sequencer 01:58:55 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:58:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:58:55 INFO] incremented to [AERI set: name T37, 6 scans, 0 angle, D16300 command] set
[sigmove 01:58:55 INFO] S37.SIG(18)
[sigmove 01:58:55 DEBUG] transformed S37Ma.SPC -> S37MA.SPC
[sigmove 01:58:55 DEBUG] transformed S37Mb.SPC -> S37MB.SPC
[sigmove 01:58:55 DEBUG] transformed S37Mc.SPC -> S37MC.SPC
[sigmove 01:58:55 DEBUG] transformed S37Md.SPC -> S37MD.SPC
[sigmove 01:58:55 DEBUG] transformed S37Me.SPC -> S37ME.SPC
[sigmove 01:58:55 DEBUG] transformed S37Mf.SPC -> S37MF.SPC
[Status 01:58:55 INFO] data for S37 transferred to science data processing
[Tidy 01:58:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:58:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:58:55 INFO] resetting WatchDogTimer
[Status 01:58:55 INFO] Starting Set [AERI set: name T37, 6 scans, 0 angle, D16300 command]
[Ingest 01:58:55 INFO] Sending XML status message
[Status 01:58:55 INFO] Mirror angle: 0
[Mirror 01:58:55 INFO] rotating to position T
[Status 01:58:56 INFO] .SET file for ACQ96 ready
[Ingest 01:58:56 INFO] Starting acquisition
[Status 01:58:56 INFO] reading housekeeping
[Status 01:59:14 INFO] acquire complete
[Status 01:59:14 INFO] writing housekeeping
[Sequencer 01:59:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:59:14 INFO] incremented T scene to 37 completed views
[Sequencer 01:59:14 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:59:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:59:14 INFO] incremented to [AERI set: name U37, 6 scans, 0 angle, D16300 command] set
[sigmove 01:59:14 INFO] T37.SIG(18)
[sigmove 01:59:14 DEBUG] transformed T37Ma.SPC -> T37MA.SPC
[sigmove 01:59:14 DEBUG] transformed T37Mb.SPC -> T37MB.SPC
[sigmove 01:59:14 DEBUG] transformed T37Mc.SPC -> T37MC.SPC
[sigmove 01:59:14 DEBUG] transformed T37Md.SPC -> T37MD.SPC
[sigmove 01:59:14 DEBUG] transformed T37Me.SPC -> T37ME.SPC
[sigmove 01:59:14 DEBUG] transformed T37Mf.SPC -> T37MF.SPC
[Status 01:59:14 INFO] data for T37 transferred to science data processing
[Tidy 01:59:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:59:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:59:14 INFO] resetting WatchDogTimer
[Status 01:59:14 INFO] Starting Set [AERI set: name U37, 6 scans, 0 angle, D16300 command]
[Ingest 01:59:14 INFO] Sending XML status message
[Status 01:59:14 INFO] Mirror angle: 0
[Mirror 01:59:15 INFO] rotating to position U
[Status 01:59:15 INFO] .SET file for ACQ96 ready
[Ingest 01:59:15 INFO] Starting acquisition
[Status 01:59:15 INFO] reading housekeeping
[Status 01:59:33 INFO] acquire complete
[Status 01:59:33 INFO] writing housekeeping
[Sequencer 01:59:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:59:33 INFO] incremented U scene to 37 completed views
[Sequencer 01:59:33 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:59:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:59:33 INFO] incremented to [AERI set: name V37, 6 scans, 0 angle, D16300 command] set
[sigmove 01:59:33 INFO] U37.SIG(18)
[sigmove 01:59:33 DEBUG] transformed U37Ma.SPC -> U37MA.SPC
[sigmove 01:59:33 DEBUG] transformed U37Mb.SPC -> U37MB.SPC
[sigmove 01:59:33 DEBUG] transformed U37Mc.SPC -> U37MC.SPC
[sigmove 01:59:33 DEBUG] transformed U37Md.SPC -> U37MD.SPC
[sigmove 01:59:33 DEBUG] transformed U37Me.SPC -> U37ME.SPC
[sigmove 01:59:33 DEBUG] transformed U37Mf.SPC -> U37MF.SPC
[Status 01:59:33 INFO] data for U37 transferred to science data processing
[Tidy 01:59:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:59:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:59:33 INFO] resetting WatchDogTimer
[Status 01:59:34 INFO] Starting Set [AERI set: name V37, 6 scans, 0 angle, D16300 command]
[Ingest 01:59:34 INFO] Sending XML status message
[Status 01:59:34 INFO] Mirror angle: 0
[Mirror 01:59:34 INFO] rotating to position V
[Status 01:59:34 INFO] .SET file for ACQ96 ready
[Ingest 01:59:34 INFO] Starting acquisition
[Status 01:59:34 INFO] reading housekeeping
[Status 01:59:52 INFO] acquire complete
[Status 01:59:52 INFO] writing housekeeping
[Sequencer 01:59:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 01:59:52 INFO] incremented V scene to 37 completed views
[Sequencer 01:59:52 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 01:59:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 01:59:52 INFO] incremented to [AERI set: name W37, 6 scans, 0 angle, D16300 command] set
[sigmove 01:59:53 INFO] V37.SIG(18)
[sigmove 01:59:53 DEBUG] transformed V37Ma.SPC -> V37MA.SPC
[sigmove 01:59:53 DEBUG] transformed V37Mb.SPC -> V37MB.SPC
[sigmove 01:59:53 DEBUG] transformed V37Mc.SPC -> V37MC.SPC
[sigmove 01:59:53 DEBUG] transformed V37Md.SPC -> V37MD.SPC
[sigmove 01:59:53 DEBUG] transformed V37Me.SPC -> V37ME.SPC
[sigmove 01:59:53 DEBUG] transformed V37Mf.SPC -> V37MF.SPC
[Status 01:59:53 INFO] data for V37 transferred to science data processing
[Tidy 01:59:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 01:59:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 01:59:53 INFO] resetting WatchDogTimer
[Status 01:59:53 INFO] Starting Set [AERI set: name W37, 6 scans, 0 angle, D16300 command]
[Ingest 01:59:53 INFO] Sending XML status message
[Status 01:59:53 INFO] Mirror angle: 0
[Mirror 01:59:53 INFO] rotating to position W
[Status 01:59:53 INFO] .SET file for ACQ96 ready
[Ingest 01:59:53 INFO] Starting acquisition
[Status 01:59:53 INFO] reading housekeeping
[Status 02:00:11 INFO] acquire complete
[Status 02:00:12 INFO] writing housekeeping
[Sequencer 02:00:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:00:12 INFO] incremented W scene to 37 completed views
[Sequencer 02:00:12 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:00:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:00:12 INFO] incremented to [AERI set: name X37, 6 scans, 0 angle, D16300 command] set
[sigmove 02:00:12 INFO] W37.SIG(18)
[sigmove 02:00:12 DEBUG] transformed W37Ma.SPC -> W37MA.SPC
[sigmove 02:00:12 DEBUG] transformed W37Mb.SPC -> W37MB.SPC
[sigmove 02:00:12 DEBUG] transformed W37Mc.SPC -> W37MC.SPC
[sigmove 02:00:12 DEBUG] transformed W37Md.SPC -> W37MD.SPC
[sigmove 02:00:12 DEBUG] transformed W37Me.SPC -> W37ME.SPC
[sigmove 02:00:12 DEBUG] transformed W37Mf.SPC -> W37MF.SPC
[Status 02:00:12 INFO] data for W37 transferred to science data processing
[Tidy 02:00:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:00:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:00:12 INFO] resetting WatchDogTimer
[Status 02:00:12 INFO] Starting Set [AERI set: name X37, 6 scans, 0 angle, D16300 command]
[Ingest 02:00:12 INFO] Sending XML status message
[Status 02:00:12 INFO] Mirror angle: 0
[Mirror 02:00:12 INFO] rotating to position X
[Status 02:00:12 INFO] .SET file for ACQ96 ready
[Ingest 02:00:12 INFO] Starting acquisition
[Status 02:00:12 INFO] reading housekeeping
[Status 02:00:30 INFO] acquire complete
[Status 02:00:31 INFO] writing housekeeping
[Sequencer 02:00:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:00:31 INFO] incremented X scene to 37 completed views
[Sequencer 02:00:31 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:00:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:00:31 INFO] incremented to [AERI set: name Y37, 6 scans, 0 angle, D16300 command] set
[sigmove 02:00:31 INFO] X37.SIG(18)
[sigmove 02:00:31 DEBUG] transformed X37Ma.SPC -> X37MA.SPC
[sigmove 02:00:31 DEBUG] transformed X37Mb.SPC -> X37MB.SPC
[sigmove 02:00:31 DEBUG] transformed X37Mc.SPC -> X37MC.SPC
[sigmove 02:00:31 DEBUG] transformed X37Md.SPC -> X37MD.SPC
[sigmove 02:00:31 DEBUG] transformed X37Me.SPC -> X37ME.SPC
[sigmove 02:00:31 DEBUG] transformed X37Mf.SPC -> X37MF.SPC
[Status 02:00:31 INFO] data for X37 transferred to science data processing
[Tidy 02:00:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:00:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:00:31 INFO] resetting WatchDogTimer
[Status 02:00:31 INFO] Starting Set [AERI set: name Y37, 6 scans, 0 angle, D16300 command]
[Ingest 02:00:31 INFO] Sending XML status message
[Status 02:00:31 INFO] Mirror angle: 0
[Mirror 02:00:31 INFO] rotating to position Y
[Status 02:00:31 INFO] .SET file for ACQ96 ready
[Ingest 02:00:31 INFO] Starting acquisition
[Status 02:00:31 INFO] reading housekeeping
[Status 02:00:49 INFO] acquire complete
[Status 02:00:50 INFO] writing housekeeping
[Sequencer 02:00:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:00:50 INFO] incremented Y scene to 37 completed views
[Sequencer 02:00:50 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:00:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:00:50 INFO] incremented to [AERI set: name Z37, 6 scans, 0 angle, D16300 command] set
[sigmove 02:00:50 INFO] Y37.SIG(18)
[sigmove 02:00:50 DEBUG] transformed Y37Ma.SPC -> Y37MA.SPC
[sigmove 02:00:50 DEBUG] transformed Y37Mb.SPC -> Y37MB.SPC
[sigmove 02:00:50 DEBUG] transformed Y37Mc.SPC -> Y37MC.SPC
[sigmove 02:00:50 DEBUG] transformed Y37Md.SPC -> Y37MD.SPC
[sigmove 02:00:50 DEBUG] transformed Y37Me.SPC -> Y37ME.SPC
[sigmove 02:00:50 DEBUG] transformed Y37Mf.SPC -> Y37MF.SPC
[Status 02:00:50 INFO] data for Y37 transferred to science data processing
[Tidy 02:00:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:00:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:00:50 INFO] resetting WatchDogTimer
[Status 02:00:50 INFO] Starting Set [AERI set: name Z37, 6 scans, 0 angle, D16300 command]
[Ingest 02:00:50 INFO] Sending XML status message
[Status 02:00:50 INFO] Mirror angle: 0
[Mirror 02:00:50 INFO] rotating to position Z
[Status 02:00:50 INFO] .SET file for ACQ96 ready
[Ingest 02:00:50 INFO] Starting acquisition
[Status 02:00:50 INFO] reading housekeeping
[Status 02:01:08 INFO] acquire complete
[Status 02:01:09 INFO] writing housekeeping
[Sequencer 02:01:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:01:09 INFO] incremented Z scene to 37 completed views
[Sequencer 02:01:09 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:01:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:01:09 INFO] incremented to [AERI set: name A38, 6 scans, 120 angle, D28300 command] set
[sigmove 02:01:09 INFO] Z37.SIG(18)
[sigmove 02:01:09 DEBUG] transformed Z37Ma.SPC -> Z37MA.SPC
[sigmove 02:01:09 DEBUG] transformed Z37Mb.SPC -> Z37MB.SPC
[sigmove 02:01:09 DEBUG] transformed Z37Mc.SPC -> Z37MC.SPC
[sigmove 02:01:09 DEBUG] transformed Z37Md.SPC -> Z37MD.SPC
[sigmove 02:01:09 DEBUG] transformed Z37Me.SPC -> Z37ME.SPC
[sigmove 02:01:09 DEBUG] transformed Z37Mf.SPC -> Z37MF.SPC
[Status 02:01:09 INFO] data for Z37 transferred to science data processing
[Tidy 02:01:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:01:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:01:09 INFO] resetting WatchDogTimer
[Status 02:01:09 INFO] Starting Set [AERI set: name A38, 6 scans, 120 angle, D28300 command]
[Ingest 02:01:09 INFO] Sending XML status message
[Status 02:01:09 INFO] Mirror angle: 120
[Mirror 02:01:09 INFO] rotating to position A
[Status 02:01:10 INFO] .SET file for ACQ96 ready
[Ingest 02:01:10 INFO] Starting acquisition
[Status 02:01:10 INFO] reading housekeeping
[Status 02:01:29 INFO] acquire complete
[Status 02:01:29 INFO] writing housekeeping
[Sequencer 02:01:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:01:29 INFO] incremented A scene to 38 completed views
[Sequencer 02:01:29 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:01:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:01:29 INFO] incremented to [AERI set: name H38, 6 scans, 60 angle, D22500 command] set
[sigmove 02:01:29 INFO] A38.SIG(18)
[sigmove 02:01:29 DEBUG] transformed A38Ma.SPC -> A38MA.SPC
[sigmove 02:01:29 DEBUG] transformed A38Mb.SPC -> A38MB.SPC
[sigmove 02:01:29 DEBUG] transformed A38Mc.SPC -> A38MC.SPC
[sigmove 02:01:29 DEBUG] transformed A38Md.SPC -> A38MD.SPC
[sigmove 02:01:29 DEBUG] transformed A38Me.SPC -> A38ME.SPC
[sigmove 02:01:29 DEBUG] transformed A38Mf.SPC -> A38MF.SPC
[Status 02:01:29 INFO] data for A38 transferred to science data processing
[Tidy 02:01:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:01:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:01:29 INFO] resetting WatchDogTimer
[Status 02:01:29 INFO] Starting Set [AERI set: name H38, 6 scans, 60 angle, D22500 command]
[Ingest 02:01:29 INFO] Sending XML status message
[Status 02:01:29 INFO] Mirror angle: 60
[Mirror 02:01:29 INFO] rotating to position H
[Status 02:01:30 INFO] .SET file for ACQ96 ready
[Ingest 02:01:30 INFO] Starting acquisition
[Status 02:01:30 INFO] reading housekeeping
[Status 02:01:48 INFO] acquire complete
[Status 02:01:48 INFO] writing housekeeping
[Sequencer 02:01:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:01:48 INFO] incremented H scene to 38 completed views
[Sequencer 02:01:48 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:01:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:01:48 INFO] incremented to [AERI set: name S38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:01:48 INFO] H38.SIG(18)
[sigmove 02:01:48 DEBUG] transformed H38Ma.SPC -> H38MA.SPC
[sigmove 02:01:48 DEBUG] transformed H38Mb.SPC -> H38MB.SPC
[sigmove 02:01:48 DEBUG] transformed H38Mc.SPC -> H38MC.SPC
[sigmove 02:01:48 DEBUG] transformed H38Md.SPC -> H38MD.SPC
[sigmove 02:01:48 DEBUG] transformed H38Me.SPC -> H38ME.SPC
[sigmove 02:01:48 DEBUG] transformed H38Mf.SPC -> H38MF.SPC
[Status 02:01:48 INFO] data for H38 transferred to science data processing
[Tidy 02:01:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:01:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:01:48 INFO] resetting WatchDogTimer
[Status 02:01:48 INFO] Starting Set [AERI set: name S38, 6 scans, 0 angle, D16300 command]
[Ingest 02:01:48 INFO] Sending XML status message
[Status 02:01:48 INFO] Mirror angle: 0
[Mirror 02:01:48 INFO] rotating to position S
[Status 02:01:49 INFO] .SET file for ACQ96 ready
[Ingest 02:01:49 INFO] Starting acquisition
[Status 02:01:49 INFO] reading housekeeping
[Status 02:02:07 INFO] acquire complete
[Status 02:02:07 INFO] writing housekeeping
[Sequencer 02:02:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:02:07 INFO] incremented S scene to 38 completed views
[Sequencer 02:02:07 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:02:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:02:07 INFO] incremented to [AERI set: name T38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:02:07 INFO] S38.SIG(18)
[sigmove 02:02:07 DEBUG] transformed S38Ma.SPC -> S38MA.SPC
[sigmove 02:02:07 DEBUG] transformed S38Mb.SPC -> S38MB.SPC
[sigmove 02:02:07 DEBUG] transformed S38Mc.SPC -> S38MC.SPC
[sigmove 02:02:07 DEBUG] transformed S38Md.SPC -> S38MD.SPC
[sigmove 02:02:07 DEBUG] transformed S38Me.SPC -> S38ME.SPC
[sigmove 02:02:07 DEBUG] transformed S38Mf.SPC -> S38MF.SPC
[Status 02:02:07 INFO] data for S38 transferred to science data processing
[Tidy 02:02:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:02:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:02:07 INFO] resetting WatchDogTimer
[Status 02:02:07 INFO] Starting Set [AERI set: name T38, 6 scans, 0 angle, D16300 command]
[Ingest 02:02:07 INFO] Sending XML status message
[Status 02:02:07 INFO] Mirror angle: 0
[Mirror 02:02:07 INFO] rotating to position T
[Status 02:02:08 INFO] .SET file for ACQ96 ready
[Ingest 02:02:08 INFO] Starting acquisition
[Status 02:02:08 INFO] reading housekeeping
[Status 02:02:26 INFO] acquire complete
[Status 02:02:26 INFO] writing housekeeping
[Sequencer 02:02:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:02:26 INFO] incremented T scene to 38 completed views
[Sequencer 02:02:26 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:02:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:02:26 INFO] incremented to [AERI set: name U38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:02:26 INFO] T38.SIG(18)
[sigmove 02:02:26 DEBUG] transformed T38Ma.SPC -> T38MA.SPC
[sigmove 02:02:26 DEBUG] transformed T38Mb.SPC -> T38MB.SPC
[sigmove 02:02:26 DEBUG] transformed T38Mc.SPC -> T38MC.SPC
[sigmove 02:02:26 DEBUG] transformed T38Md.SPC -> T38MD.SPC
[sigmove 02:02:26 DEBUG] transformed T38Me.SPC -> T38ME.SPC
[sigmove 02:02:26 DEBUG] transformed T38Mf.SPC -> T38MF.SPC
[Status 02:02:26 INFO] data for T38 transferred to science data processing
[Tidy 02:02:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:02:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:02:26 INFO] resetting WatchDogTimer
[Status 02:02:26 INFO] Starting Set [AERI set: name U38, 6 scans, 0 angle, D16300 command]
[Ingest 02:02:26 INFO] Sending XML status message
[Status 02:02:26 INFO] Mirror angle: 0
[Mirror 02:02:26 INFO] rotating to position U
[Status 02:02:27 INFO] .SET file for ACQ96 ready
[Ingest 02:02:27 INFO] Starting acquisition
[Status 02:02:27 INFO] reading housekeeping
[Status 02:02:45 INFO] acquire complete
[Status 02:02:45 INFO] writing housekeeping
[Sequencer 02:02:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:02:45 INFO] incremented U scene to 38 completed views
[Sequencer 02:02:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:02:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:02:45 INFO] incremented to [AERI set: name V38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:02:45 INFO] U38.SIG(18)
[sigmove 02:02:45 DEBUG] transformed U38Ma.SPC -> U38MA.SPC
[sigmove 02:02:45 DEBUG] transformed U38Mb.SPC -> U38MB.SPC
[sigmove 02:02:45 DEBUG] transformed U38Mc.SPC -> U38MC.SPC
[sigmove 02:02:45 DEBUG] transformed U38Md.SPC -> U38MD.SPC
[sigmove 02:02:45 DEBUG] transformed U38Me.SPC -> U38ME.SPC
[sigmove 02:02:45 DEBUG] transformed U38Mf.SPC -> U38MF.SPC
[Status 02:02:45 INFO] data for U38 transferred to science data processing
[Tidy 02:02:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:02:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:02:45 INFO] resetting WatchDogTimer
[Status 02:02:45 INFO] Starting Set [AERI set: name V38, 6 scans, 0 angle, D16300 command]
[Ingest 02:02:45 INFO] Sending XML status message
[Status 02:02:45 INFO] Mirror angle: 0
[Mirror 02:02:46 INFO] rotating to position V
[Status 02:02:46 INFO] .SET file for ACQ96 ready
[Ingest 02:02:46 INFO] Starting acquisition
[Status 02:02:46 INFO] reading housekeeping
[Status 02:03:04 INFO] acquire complete
[Status 02:03:04 INFO] writing housekeeping
[Sequencer 02:03:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:03:04 INFO] incremented V scene to 38 completed views
[Sequencer 02:03:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:03:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:03:04 INFO] incremented to [AERI set: name W38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:03:04 INFO] V38.SIG(18)
[sigmove 02:03:04 DEBUG] transformed V38Ma.SPC -> V38MA.SPC
[sigmove 02:03:05 DEBUG] transformed V38Mb.SPC -> V38MB.SPC
[sigmove 02:03:05 DEBUG] transformed V38Mc.SPC -> V38MC.SPC
[sigmove 02:03:05 DEBUG] transformed V38Md.SPC -> V38MD.SPC
[sigmove 02:03:05 DEBUG] transformed V38Me.SPC -> V38ME.SPC
[sigmove 02:03:05 DEBUG] transformed V38Mf.SPC -> V38MF.SPC
[Status 02:03:05 INFO] data for V38 transferred to science data processing
[Tidy 02:03:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:03:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:03:05 INFO] resetting WatchDogTimer
[Status 02:03:05 INFO] Starting Set [AERI set: name W38, 6 scans, 0 angle, D16300 command]
[Ingest 02:03:05 INFO] Sending XML status message
[Status 02:03:05 INFO] Mirror angle: 0
[Mirror 02:03:05 INFO] rotating to position W
[Status 02:03:05 INFO] .SET file for ACQ96 ready
[Ingest 02:03:05 INFO] Starting acquisition
[Status 02:03:05 INFO] reading housekeeping
[Status 02:03:23 INFO] acquire complete
[Status 02:03:24 INFO] writing housekeeping
[Sequencer 02:03:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:03:24 INFO] incremented W scene to 38 completed views
[Sequencer 02:03:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:03:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:03:24 INFO] incremented to [AERI set: name X38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:03:24 INFO] W38.SIG(18)
[sigmove 02:03:24 DEBUG] transformed W38Ma.SPC -> W38MA.SPC
[sigmove 02:03:24 DEBUG] transformed W38Mb.SPC -> W38MB.SPC
[sigmove 02:03:24 DEBUG] transformed W38Mc.SPC -> W38MC.SPC
[sigmove 02:03:24 DEBUG] transformed W38Md.SPC -> W38MD.SPC
[sigmove 02:03:24 DEBUG] transformed W38Me.SPC -> W38ME.SPC
[sigmove 02:03:24 DEBUG] transformed W38Mf.SPC -> W38MF.SPC
[Status 02:03:24 INFO] data for W38 transferred to science data processing
[Tidy 02:03:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:03:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:03:24 INFO] resetting WatchDogTimer
[Status 02:03:24 INFO] Starting Set [AERI set: name X38, 6 scans, 0 angle, D16300 command]
[Ingest 02:03:24 INFO] Sending XML status message
[Status 02:03:24 INFO] Mirror angle: 0
[Mirror 02:03:24 INFO] rotating to position X
[Status 02:03:24 INFO] .SET file for ACQ96 ready
[Ingest 02:03:24 INFO] Starting acquisition
[Status 02:03:24 INFO] reading housekeeping
[Status 02:03:42 INFO] acquire complete
[Status 02:03:43 INFO] writing housekeeping
[Sequencer 02:03:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:03:43 INFO] incremented X scene to 38 completed views
[Sequencer 02:03:43 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:03:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:03:43 INFO] incremented to [AERI set: name Y38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:03:43 INFO] X38.SIG(18)
[sigmove 02:03:43 DEBUG] transformed X38Ma.SPC -> X38MA.SPC
[sigmove 02:03:43 DEBUG] transformed X38Mb.SPC -> X38MB.SPC
[sigmove 02:03:43 DEBUG] transformed X38Mc.SPC -> X38MC.SPC
[sigmove 02:03:43 DEBUG] transformed X38Md.SPC -> X38MD.SPC
[sigmove 02:03:43 DEBUG] transformed X38Me.SPC -> X38ME.SPC
[sigmove 02:03:43 DEBUG] transformed X38Mf.SPC -> X38MF.SPC
[Status 02:03:43 INFO] data for X38 transferred to science data processing
[Tidy 02:03:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:03:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:03:43 INFO] resetting WatchDogTimer
[Status 02:03:43 INFO] Starting Set [AERI set: name Y38, 6 scans, 0 angle, D16300 command]
[Ingest 02:03:43 INFO] Sending XML status message
[Status 02:03:43 INFO] Mirror angle: 0
[Mirror 02:03:43 INFO] rotating to position Y
[Status 02:03:43 INFO] .SET file for ACQ96 ready
[Ingest 02:03:43 INFO] Starting acquisition
[Status 02:03:43 INFO] reading housekeeping
[Status 02:04:01 INFO] acquire complete
[Status 02:04:02 INFO] writing housekeeping
[Sequencer 02:04:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:04:02 INFO] incremented Y scene to 38 completed views
[Sequencer 02:04:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:04:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:04:02 INFO] incremented to [AERI set: name Z38, 6 scans, 0 angle, D16300 command] set
[sigmove 02:04:02 INFO] Y38.SIG(18)
[sigmove 02:04:02 DEBUG] transformed Y38Ma.SPC -> Y38MA.SPC
[sigmove 02:04:02 DEBUG] transformed Y38Mb.SPC -> Y38MB.SPC
[sigmove 02:04:02 DEBUG] transformed Y38Mc.SPC -> Y38MC.SPC
[sigmove 02:04:02 DEBUG] transformed Y38Md.SPC -> Y38MD.SPC
[sigmove 02:04:02 DEBUG] transformed Y38Me.SPC -> Y38ME.SPC
[sigmove 02:04:02 DEBUG] transformed Y38Mf.SPC -> Y38MF.SPC
[Status 02:04:02 INFO] data for Y38 transferred to science data processing
[Tidy 02:04:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:04:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:04:02 INFO] resetting WatchDogTimer
[Status 02:04:02 INFO] Starting Set [AERI set: name Z38, 6 scans, 0 angle, D16300 command]
[Ingest 02:04:02 INFO] Sending XML status message
[Status 02:04:02 INFO] Mirror angle: 0
[Mirror 02:04:02 INFO] rotating to position Z
[Status 02:04:02 INFO] .SET file for ACQ96 ready
[Ingest 02:04:02 INFO] Starting acquisition
[Status 02:04:02 INFO] reading housekeeping
[Status 02:04:20 INFO] acquire complete
[Status 02:04:21 INFO] writing housekeeping
[Sequencer 02:04:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:04:21 INFO] incremented Z scene to 38 completed views
[Sequencer 02:04:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:04:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:04:21 INFO] incremented to [AERI set: name H39, 6 scans, 60 angle, D22500 command] set
[sigmove 02:04:21 INFO] Z38.SIG(18)
[sigmove 02:04:21 DEBUG] transformed Z38Ma.SPC -> Z38MA.SPC
[sigmove 02:04:21 DEBUG] transformed Z38Mb.SPC -> Z38MB.SPC
[sigmove 02:04:21 DEBUG] transformed Z38Mc.SPC -> Z38MC.SPC
[sigmove 02:04:21 DEBUG] transformed Z38Md.SPC -> Z38MD.SPC
[sigmove 02:04:21 DEBUG] transformed Z38Me.SPC -> Z38ME.SPC
[sigmove 02:04:21 DEBUG] transformed Z38Mf.SPC -> Z38MF.SPC
[Status 02:04:21 INFO] data for Z38 transferred to science data processing
[Tidy 02:04:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:04:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:04:21 INFO] resetting WatchDogTimer
[Status 02:04:21 INFO] Starting Set [AERI set: name H39, 6 scans, 60 angle, D22500 command]
[Ingest 02:04:21 INFO] Sending XML status message
[Status 02:04:21 INFO] Mirror angle: 60
[Mirror 02:04:21 INFO] rotating to position H
[Status 02:04:22 INFO] .SET file for ACQ96 ready
[Ingest 02:04:22 INFO] Starting acquisition
[Status 02:04:22 INFO] reading housekeeping
[Status 02:04:40 INFO] acquire complete
[Status 02:04:40 INFO] writing housekeeping
[Sequencer 02:04:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:04:40 INFO] incremented H scene to 39 completed views
[Sequencer 02:04:40 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:04:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:04:40 INFO] incremented to [AERI set: name A39, 6 scans, 120 angle, D28300 command] set
[sigmove 02:04:40 INFO] H39.SIG(18)
[sigmove 02:04:40 DEBUG] transformed H39Ma.SPC -> H39MA.SPC
[sigmove 02:04:40 DEBUG] transformed H39Mb.SPC -> H39MB.SPC
[sigmove 02:04:40 DEBUG] transformed H39Mc.SPC -> H39MC.SPC
[sigmove 02:04:40 DEBUG] transformed H39Md.SPC -> H39MD.SPC
[sigmove 02:04:40 DEBUG] transformed H39Me.SPC -> H39ME.SPC
[sigmove 02:04:40 DEBUG] transformed H39Mf.SPC -> H39MF.SPC
[Status 02:04:40 INFO] data for H39 transferred to science data processing
[Tidy 02:04:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:04:40 INFO] A37.FIN(19),H37.FIN(19),S37.FIN(19),T37.FIN(19),U37.FIN(19),V37.FIN(19),W37.FIN(19),X37.FIN(19),Y37.FIN(19),Z37.FIN(19),A38.FIN(19),H38.FIN(19),S38.FIN(19),T38.FIN(19),U38.FIN(19),V38.FIN(19),W38.FIN(19),X38.FIN(19),Y38.FIN(19),Z38.FIN(19)
[sigmove 02:04:40 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:04:40 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:04:41 DEBUG] done zipping
[WatchDog 02:04:41 INFO] resetting WatchDogTimer
[Status 02:04:41 INFO] Starting Set [AERI set: name A39, 6 scans, 120 angle, D28300 command]
[Ingest 02:04:41 INFO] Sending XML status message
[Status 02:04:41 INFO] Mirror angle: 120
[Mirror 02:04:41 INFO] rotating to position A
[Status 02:04:42 INFO] .SET file for ACQ96 ready
[Ingest 02:04:42 INFO] Starting acquisition
[Status 02:04:42 INFO] reading housekeeping
[Status 02:05:00 INFO] acquire complete
[Status 02:05:00 INFO] writing housekeeping
[Sequencer 02:05:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:05:00 INFO] incremented A scene to 39 completed views
[Sequencer 02:05:00 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:05:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:05:00 INFO] incremented to [AERI set: name S39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:05:00 INFO] A39.SIG(18)
[sigmove 02:05:00 DEBUG] transformed A39Ma.SPC -> A39MA.SPC
[sigmove 02:05:00 DEBUG] transformed A39Mb.SPC -> A39MB.SPC
[sigmove 02:05:00 DEBUG] transformed A39Mc.SPC -> A39MC.SPC
[sigmove 02:05:00 DEBUG] transformed A39Md.SPC -> A39MD.SPC
[sigmove 02:05:00 DEBUG] transformed A39Me.SPC -> A39ME.SPC
[sigmove 02:05:00 DEBUG] transformed A39Mf.SPC -> A39MF.SPC
[Status 02:05:00 INFO] data for A39 transferred to science data processing
[Tidy 02:05:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:05:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:05:00 INFO] resetting WatchDogTimer
[Status 02:05:00 INFO] Starting Set [AERI set: name S39, 6 scans, 0 angle, D16300 command]
[Ingest 02:05:00 INFO] Sending XML status message
[Status 02:05:00 INFO] Mirror angle: 0
[Mirror 02:05:00 INFO] rotating to position S
[Status 02:05:02 INFO] .SET file for ACQ96 ready
[Ingest 02:05:02 INFO] Starting acquisition
[Status 02:05:02 INFO] reading housekeeping
[Status 02:05:20 INFO] acquire complete
[Status 02:05:21 INFO] writing housekeeping
[Sequencer 02:05:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:05:21 INFO] incremented S scene to 39 completed views
[Sequencer 02:05:21 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:05:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:05:21 INFO] incremented to [AERI set: name T39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:05:21 INFO] S39.SIG(18)
[sigmove 02:05:21 DEBUG] transformed S39Ma.SPC -> S39MA.SPC
[sigmove 02:05:21 DEBUG] transformed S39Mb.SPC -> S39MB.SPC
[sigmove 02:05:21 DEBUG] transformed S39Mc.SPC -> S39MC.SPC
[sigmove 02:05:21 DEBUG] transformed S39Md.SPC -> S39MD.SPC
[sigmove 02:05:21 DEBUG] transformed S39Me.SPC -> S39ME.SPC
[sigmove 02:05:21 DEBUG] transformed S39Mf.SPC -> S39MF.SPC
[Status 02:05:21 INFO] data for S39 transferred to science data processing
[Tidy 02:05:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:05:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:05:21 INFO] resetting WatchDogTimer
[Status 02:05:21 INFO] Starting Set [AERI set: name T39, 6 scans, 0 angle, D16300 command]
[Ingest 02:05:21 INFO] Sending XML status message
[Status 02:05:21 INFO] Mirror angle: 0
[Mirror 02:05:21 INFO] rotating to position T
[Status 02:05:21 INFO] .SET file for ACQ96 ready
[Ingest 02:05:21 INFO] Starting acquisition
[Status 02:05:21 INFO] reading housekeeping
[Status 02:05:39 INFO] acquire complete
[Status 02:05:39 INFO] writing housekeeping
[Sequencer 02:05:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:05:39 INFO] incremented T scene to 39 completed views
[Sequencer 02:05:39 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:05:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:05:40 INFO] incremented to [AERI set: name U39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:05:40 INFO] T39.SIG(18)
[sigmove 02:05:40 DEBUG] transformed T39Ma.SPC -> T39MA.SPC
[sigmove 02:05:40 DEBUG] transformed T39Mb.SPC -> T39MB.SPC
[sigmove 02:05:40 DEBUG] transformed T39Mc.SPC -> T39MC.SPC
[sigmove 02:05:40 DEBUG] transformed T39Md.SPC -> T39MD.SPC
[sigmove 02:05:40 DEBUG] transformed T39Me.SPC -> T39ME.SPC
[sigmove 02:05:40 DEBUG] transformed T39Mf.SPC -> T39MF.SPC
[Status 02:05:40 INFO] data for T39 transferred to science data processing
[Tidy 02:05:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:05:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:05:40 INFO] resetting WatchDogTimer
[Status 02:05:40 INFO] Starting Set [AERI set: name U39, 6 scans, 0 angle, D16300 command]
[Ingest 02:05:40 INFO] Sending XML status message
[Status 02:05:40 INFO] Mirror angle: 0
[Mirror 02:05:40 INFO] rotating to position U
[Status 02:05:40 INFO] .SET file for ACQ96 ready
[Ingest 02:05:40 INFO] Starting acquisition
[Status 02:05:40 INFO] reading housekeeping
[Status 02:05:58 INFO] acquire complete
[Status 02:05:58 INFO] writing housekeeping
[Sequencer 02:05:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:05:58 INFO] incremented U scene to 39 completed views
[Sequencer 02:05:58 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:05:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:05:58 INFO] incremented to [AERI set: name V39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:05:58 INFO] U39.SIG(18)
[sigmove 02:05:59 DEBUG] transformed U39Ma.SPC -> U39MA.SPC
[sigmove 02:05:59 DEBUG] transformed U39Mb.SPC -> U39MB.SPC
[sigmove 02:05:59 DEBUG] transformed U39Mc.SPC -> U39MC.SPC
[sigmove 02:05:59 DEBUG] transformed U39Md.SPC -> U39MD.SPC
[sigmove 02:05:59 DEBUG] transformed U39Me.SPC -> U39ME.SPC
[sigmove 02:05:59 DEBUG] transformed U39Mf.SPC -> U39MF.SPC
[Status 02:05:59 INFO] data for U39 transferred to science data processing
[Tidy 02:05:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:05:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:05:59 INFO] resetting WatchDogTimer
[Status 02:05:59 INFO] Starting Set [AERI set: name V39, 6 scans, 0 angle, D16300 command]
[Ingest 02:05:59 INFO] Sending XML status message
[Status 02:05:59 INFO] Mirror angle: 0
[Mirror 02:05:59 INFO] rotating to position V
[Status 02:05:59 INFO] .SET file for ACQ96 ready
[Ingest 02:05:59 INFO] Starting acquisition
[Status 02:05:59 INFO] reading housekeeping
[Status 02:06:17 INFO] acquire complete
[Status 02:06:18 INFO] writing housekeeping
[Sequencer 02:06:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:06:18 INFO] incremented V scene to 39 completed views
[Sequencer 02:06:18 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:06:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:06:18 INFO] incremented to [AERI set: name W39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:06:18 INFO] V39.SIG(18)
[sigmove 02:06:18 DEBUG] transformed V39Ma.SPC -> V39MA.SPC
[sigmove 02:06:18 DEBUG] transformed V39Mb.SPC -> V39MB.SPC
[sigmove 02:06:18 DEBUG] transformed V39Mc.SPC -> V39MC.SPC
[sigmove 02:06:18 DEBUG] transformed V39Md.SPC -> V39MD.SPC
[sigmove 02:06:18 DEBUG] transformed V39Me.SPC -> V39ME.SPC
[sigmove 02:06:18 DEBUG] transformed V39Mf.SPC -> V39MF.SPC
[Status 02:06:18 INFO] data for V39 transferred to science data processing
[Tidy 02:06:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:06:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:06:18 INFO] resetting WatchDogTimer
[Status 02:06:18 INFO] Starting Set [AERI set: name W39, 6 scans, 0 angle, D16300 command]
[Ingest 02:06:18 INFO] Sending XML status message
[Status 02:06:18 INFO] Mirror angle: 0
[Mirror 02:06:18 INFO] rotating to position W
[Status 02:06:18 INFO] .SET file for ACQ96 ready
[Ingest 02:06:18 INFO] Starting acquisition
[Status 02:06:18 INFO] reading housekeeping
[Status 02:06:36 INFO] acquire complete
[Status 02:06:37 INFO] writing housekeeping
[Sequencer 02:06:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:06:37 INFO] incremented W scene to 39 completed views
[Sequencer 02:06:37 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:06:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:06:37 INFO] incremented to [AERI set: name X39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:06:37 INFO] W39.SIG(18)
[sigmove 02:06:37 DEBUG] transformed W39Ma.SPC -> W39MA.SPC
[sigmove 02:06:37 DEBUG] transformed W39Mb.SPC -> W39MB.SPC
[sigmove 02:06:37 DEBUG] transformed W39Mc.SPC -> W39MC.SPC
[sigmove 02:06:37 DEBUG] transformed W39Md.SPC -> W39MD.SPC
[sigmove 02:06:37 DEBUG] transformed W39Me.SPC -> W39ME.SPC
[sigmove 02:06:37 DEBUG] transformed W39Mf.SPC -> W39MF.SPC
[Status 02:06:37 INFO] data for W39 transferred to science data processing
[Tidy 02:06:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:06:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:06:37 INFO] resetting WatchDogTimer
[Status 02:06:37 INFO] Starting Set [AERI set: name X39, 6 scans, 0 angle, D16300 command]
[Ingest 02:06:37 INFO] Sending XML status message
[Status 02:06:37 INFO] Mirror angle: 0
[Mirror 02:06:37 INFO] rotating to position X
[Status 02:06:37 INFO] .SET file for ACQ96 ready
[Ingest 02:06:37 INFO] Starting acquisition
[Status 02:06:37 INFO] reading housekeeping
[Status 02:06:55 INFO] acquire complete
[Status 02:06:56 INFO] writing housekeeping
[Sequencer 02:06:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:06:56 INFO] incremented X scene to 39 completed views
[Sequencer 02:06:56 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:06:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:06:56 INFO] incremented to [AERI set: name Y39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:06:56 INFO] X39.SIG(18)
[sigmove 02:06:56 DEBUG] transformed X39Ma.SPC -> X39MA.SPC
[sigmove 02:06:56 DEBUG] transformed X39Mb.SPC -> X39MB.SPC
[sigmove 02:06:56 DEBUG] transformed X39Mc.SPC -> X39MC.SPC
[sigmove 02:06:56 DEBUG] transformed X39Md.SPC -> X39MD.SPC
[sigmove 02:06:56 DEBUG] transformed X39Me.SPC -> X39ME.SPC
[sigmove 02:06:56 DEBUG] transformed X39Mf.SPC -> X39MF.SPC
[Status 02:06:56 INFO] data for X39 transferred to science data processing
[Tidy 02:06:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:06:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:06:56 INFO] resetting WatchDogTimer
[Status 02:06:56 INFO] Starting Set [AERI set: name Y39, 6 scans, 0 angle, D16300 command]
[Ingest 02:06:56 INFO] Sending XML status message
[Status 02:06:56 INFO] Mirror angle: 0
[Mirror 02:06:56 INFO] rotating to position Y
[Status 02:06:56 INFO] .SET file for ACQ96 ready
[Ingest 02:06:56 INFO] Starting acquisition
[Status 02:06:56 INFO] reading housekeeping
[Status 02:07:14 INFO] acquire complete
[Status 02:07:15 INFO] writing housekeeping
[Sequencer 02:07:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:07:15 INFO] incremented Y scene to 39 completed views
[Sequencer 02:07:15 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:07:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:07:15 INFO] incremented to [AERI set: name Z39, 6 scans, 0 angle, D16300 command] set
[sigmove 02:07:15 INFO] Y39.SIG(18)
[sigmove 02:07:15 DEBUG] transformed Y39Ma.SPC -> Y39MA.SPC
[sigmove 02:07:15 DEBUG] transformed Y39Mb.SPC -> Y39MB.SPC
[sigmove 02:07:15 DEBUG] transformed Y39Mc.SPC -> Y39MC.SPC
[sigmove 02:07:15 DEBUG] transformed Y39Md.SPC -> Y39MD.SPC
[sigmove 02:07:15 DEBUG] transformed Y39Me.SPC -> Y39ME.SPC
[sigmove 02:07:15 DEBUG] transformed Y39Mf.SPC -> Y39MF.SPC
[Status 02:07:15 INFO] data for Y39 transferred to science data processing
[Tidy 02:07:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:07:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:07:15 INFO] resetting WatchDogTimer
[Status 02:07:15 INFO] Starting Set [AERI set: name Z39, 6 scans, 0 angle, D16300 command]
[Ingest 02:07:15 INFO] Sending XML status message
[Status 02:07:15 INFO] Mirror angle: 0
[Mirror 02:07:15 INFO] rotating to position Z
[Status 02:07:15 INFO] .SET file for ACQ96 ready
[Ingest 02:07:15 INFO] Starting acquisition
[Status 02:07:15 INFO] reading housekeeping
[Status 02:07:34 INFO] acquire complete
[Status 02:07:34 INFO] writing housekeeping
[Sequencer 02:07:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:07:34 INFO] incremented Z scene to 39 completed views
[Sequencer 02:07:34 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:07:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:07:34 INFO] incremented to [AERI set: name A40, 6 scans, 120 angle, D28300 command] set
[sigmove 02:07:34 INFO] Z39.SIG(18)
[sigmove 02:07:34 DEBUG] transformed Z39Ma.SPC -> Z39MA.SPC
[sigmove 02:07:34 DEBUG] transformed Z39Mb.SPC -> Z39MB.SPC
[sigmove 02:07:34 DEBUG] transformed Z39Mc.SPC -> Z39MC.SPC
[sigmove 02:07:34 DEBUG] transformed Z39Md.SPC -> Z39MD.SPC
[sigmove 02:07:34 DEBUG] transformed Z39Me.SPC -> Z39ME.SPC
[sigmove 02:07:34 DEBUG] transformed Z39Mf.SPC -> Z39MF.SPC
[Status 02:07:34 INFO] data for Z39 transferred to science data processing
[Tidy 02:07:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:07:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:07:34 INFO] resetting WatchDogTimer
[Status 02:07:34 INFO] Starting Set [AERI set: name A40, 6 scans, 120 angle, D28300 command]
[Ingest 02:07:34 INFO] Sending XML status message
[Status 02:07:34 INFO] Mirror angle: 120
[Mirror 02:07:34 INFO] rotating to position A
[Status 02:07:35 INFO] .SET file for ACQ96 ready
[Ingest 02:07:35 INFO] Starting acquisition
[Status 02:07:36 INFO] reading housekeeping
[Status 02:07:54 INFO] acquire complete
[Status 02:07:54 INFO] writing housekeeping
[Sequencer 02:07:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:07:54 INFO] incremented A scene to 40 completed views
[Sequencer 02:07:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:07:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:07:54 INFO] incremented to [AERI set: name H40, 6 scans, 60 angle, D22500 command] set
[sigmove 02:07:54 INFO] A40.SIG(18)
[sigmove 02:07:54 DEBUG] transformed A40Ma.SPC -> A40MA.SPC
[sigmove 02:07:54 DEBUG] transformed A40Mb.SPC -> A40MB.SPC
[sigmove 02:07:54 DEBUG] transformed A40Mc.SPC -> A40MC.SPC
[sigmove 02:07:54 DEBUG] transformed A40Md.SPC -> A40MD.SPC
[sigmove 02:07:54 DEBUG] transformed A40Me.SPC -> A40ME.SPC
[sigmove 02:07:54 DEBUG] transformed A40Mf.SPC -> A40MF.SPC
[Status 02:07:54 INFO] data for A40 transferred to science data processing
[Tidy 02:07:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:07:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:07:54 INFO] resetting WatchDogTimer
[Status 02:07:54 INFO] Starting Set [AERI set: name H40, 6 scans, 60 angle, D22500 command]
[Ingest 02:07:54 INFO] Sending XML status message
[Status 02:07:54 INFO] Mirror angle: 60
[Mirror 02:07:54 INFO] rotating to position H
[Status 02:07:55 INFO] .SET file for ACQ96 ready
[Ingest 02:07:55 INFO] Starting acquisition
[Status 02:07:55 INFO] reading housekeeping
[Status 02:08:13 INFO] acquire complete
[Status 02:08:13 INFO] writing housekeeping
[Sequencer 02:08:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:08:13 INFO] incremented H scene to 40 completed views
[Sequencer 02:08:13 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:08:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:08:13 INFO] incremented to [AERI set: name S40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:08:13 INFO] H40.SIG(18)
[sigmove 02:08:13 DEBUG] transformed H40Ma.SPC -> H40MA.SPC
[sigmove 02:08:13 DEBUG] transformed H40Mb.SPC -> H40MB.SPC
[sigmove 02:08:13 DEBUG] transformed H40Mc.SPC -> H40MC.SPC
[sigmove 02:08:13 DEBUG] transformed H40Md.SPC -> H40MD.SPC
[sigmove 02:08:13 DEBUG] transformed H40Me.SPC -> H40ME.SPC
[sigmove 02:08:13 DEBUG] transformed H40Mf.SPC -> H40MF.SPC
[Status 02:08:13 INFO] data for H40 transferred to science data processing
[Tidy 02:08:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:08:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:08:13 INFO] resetting WatchDogTimer
[Status 02:08:13 INFO] Starting Set [AERI set: name S40, 6 scans, 0 angle, D16300 command]
[Ingest 02:08:13 INFO] Sending XML status message
[Status 02:08:13 INFO] Mirror angle: 0
[Mirror 02:08:13 INFO] rotating to position S
[Status 02:08:14 INFO] .SET file for ACQ96 ready
[Ingest 02:08:14 INFO] Starting acquisition
[Status 02:08:14 INFO] reading housekeeping
[Status 02:08:32 INFO] acquire complete
[Status 02:08:32 INFO] writing housekeeping
[Sequencer 02:08:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:08:32 INFO] incremented S scene to 40 completed views
[Sequencer 02:08:32 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:08:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:08:32 INFO] incremented to [AERI set: name T40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:08:32 INFO] S40.SIG(18)
[sigmove 02:08:32 DEBUG] transformed S40Ma.SPC -> S40MA.SPC
[sigmove 02:08:32 DEBUG] transformed S40Mb.SPC -> S40MB.SPC
[sigmove 02:08:32 DEBUG] transformed S40Mc.SPC -> S40MC.SPC
[sigmove 02:08:32 DEBUG] transformed S40Md.SPC -> S40MD.SPC
[sigmove 02:08:32 DEBUG] transformed S40Me.SPC -> S40ME.SPC
[sigmove 02:08:32 DEBUG] transformed S40Mf.SPC -> S40MF.SPC
[Status 02:08:32 INFO] data for S40 transferred to science data processing
[Tidy 02:08:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:08:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:08:32 INFO] resetting WatchDogTimer
[Status 02:08:32 INFO] Starting Set [AERI set: name T40, 6 scans, 0 angle, D16300 command]
[Ingest 02:08:32 INFO] Sending XML status message
[Status 02:08:32 INFO] Mirror angle: 0
[Mirror 02:08:32 INFO] rotating to position T
[Status 02:08:33 INFO] .SET file for ACQ96 ready
[Ingest 02:08:33 INFO] Starting acquisition
[Status 02:08:33 INFO] reading housekeeping
[Status 02:08:51 INFO] acquire complete
[Status 02:08:51 INFO] writing housekeeping
[Sequencer 02:08:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:08:51 INFO] incremented T scene to 40 completed views
[Sequencer 02:08:51 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:08:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:08:51 INFO] incremented to [AERI set: name U40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:08:51 INFO] T40.SIG(18)
[sigmove 02:08:51 DEBUG] transformed T40Ma.SPC -> T40MA.SPC
[sigmove 02:08:51 DEBUG] transformed T40Mb.SPC -> T40MB.SPC
[sigmove 02:08:51 DEBUG] transformed T40Mc.SPC -> T40MC.SPC
[sigmove 02:08:51 DEBUG] transformed T40Md.SPC -> T40MD.SPC
[sigmove 02:08:51 DEBUG] transformed T40Me.SPC -> T40ME.SPC
[sigmove 02:08:51 DEBUG] transformed T40Mf.SPC -> T40MF.SPC
[Status 02:08:51 INFO] data for T40 transferred to science data processing
[Tidy 02:08:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:08:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:08:51 INFO] resetting WatchDogTimer
[Status 02:08:51 INFO] Starting Set [AERI set: name U40, 6 scans, 0 angle, D16300 command]
[Ingest 02:08:51 INFO] Sending XML status message
[Status 02:08:51 INFO] Mirror angle: 0
[Mirror 02:08:52 INFO] rotating to position U
[Status 02:08:52 INFO] .SET file for ACQ96 ready
[Ingest 02:08:52 INFO] Starting acquisition
[Status 02:08:52 INFO] reading housekeeping
[Status 02:09:10 INFO] acquire complete
[Status 02:09:10 INFO] writing housekeeping
[Sequencer 02:09:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:09:10 INFO] incremented U scene to 40 completed views
[Sequencer 02:09:10 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:09:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:09:10 INFO] incremented to [AERI set: name V40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:09:10 INFO] U40.SIG(18)
[sigmove 02:09:10 DEBUG] transformed U40Ma.SPC -> U40MA.SPC
[sigmove 02:09:10 DEBUG] transformed U40Mb.SPC -> U40MB.SPC
[sigmove 02:09:10 DEBUG] transformed U40Mc.SPC -> U40MC.SPC
[sigmove 02:09:10 DEBUG] transformed U40Md.SPC -> U40MD.SPC
[sigmove 02:09:10 DEBUG] transformed U40Me.SPC -> U40ME.SPC
[sigmove 02:09:10 DEBUG] transformed U40Mf.SPC -> U40MF.SPC
[Status 02:09:10 INFO] data for U40 transferred to science data processing
[Tidy 02:09:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:09:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:09:11 INFO] resetting WatchDogTimer
[Status 02:09:11 INFO] Starting Set [AERI set: name V40, 6 scans, 0 angle, D16300 command]
[Ingest 02:09:11 INFO] Sending XML status message
[Status 02:09:11 INFO] Mirror angle: 0
[Mirror 02:09:11 INFO] rotating to position V
[Status 02:09:11 INFO] .SET file for ACQ96 ready
[Ingest 02:09:11 INFO] Starting acquisition
[Status 02:09:11 INFO] reading housekeeping
[Status 02:09:29 INFO] acquire complete
[Status 02:09:30 INFO] writing housekeeping
[Sequencer 02:09:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:09:30 INFO] incremented V scene to 40 completed views
[Sequencer 02:09:30 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:09:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:09:30 INFO] incremented to [AERI set: name W40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:09:30 INFO] V40.SIG(18)
[sigmove 02:09:30 DEBUG] transformed V40Ma.SPC -> V40MA.SPC
[sigmove 02:09:30 DEBUG] transformed V40Mb.SPC -> V40MB.SPC
[sigmove 02:09:30 DEBUG] transformed V40Mc.SPC -> V40MC.SPC
[sigmove 02:09:30 DEBUG] transformed V40Md.SPC -> V40MD.SPC
[sigmove 02:09:30 DEBUG] transformed V40Me.SPC -> V40ME.SPC
[sigmove 02:09:30 DEBUG] transformed V40Mf.SPC -> V40MF.SPC
[Status 02:09:30 INFO] data for V40 transferred to science data processing
[Tidy 02:09:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:09:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:09:30 INFO] resetting WatchDogTimer
[Status 02:09:30 INFO] Starting Set [AERI set: name W40, 6 scans, 0 angle, D16300 command]
[Ingest 02:09:30 INFO] Sending XML status message
[Status 02:09:30 INFO] Mirror angle: 0
[Mirror 02:09:30 INFO] rotating to position W
[Status 02:09:30 INFO] .SET file for ACQ96 ready
[Ingest 02:09:30 INFO] Starting acquisition
[Status 02:09:30 INFO] reading housekeeping
[Status 02:09:48 INFO] acquire complete
[Status 02:09:49 INFO] writing housekeeping
[Sequencer 02:09:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:09:49 INFO] incremented W scene to 40 completed views
[Sequencer 02:09:49 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:09:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:09:49 INFO] incremented to [AERI set: name X40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:09:49 INFO] W40.SIG(18)
[sigmove 02:09:49 DEBUG] transformed W40Ma.SPC -> W40MA.SPC
[sigmove 02:09:49 DEBUG] transformed W40Mb.SPC -> W40MB.SPC
[sigmove 02:09:49 DEBUG] transformed W40Mc.SPC -> W40MC.SPC
[sigmove 02:09:49 DEBUG] transformed W40Md.SPC -> W40MD.SPC
[sigmove 02:09:49 DEBUG] transformed W40Me.SPC -> W40ME.SPC
[sigmove 02:09:49 DEBUG] transformed W40Mf.SPC -> W40MF.SPC
[Status 02:09:49 INFO] data for W40 transferred to science data processing
[Tidy 02:09:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:09:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:09:49 INFO] resetting WatchDogTimer
[Status 02:09:49 INFO] Starting Set [AERI set: name X40, 6 scans, 0 angle, D16300 command]
[Ingest 02:09:49 INFO] Sending XML status message
[Status 02:09:49 INFO] Mirror angle: 0
[Mirror 02:09:49 INFO] rotating to position X
[Status 02:09:49 INFO] .SET file for ACQ96 ready
[Ingest 02:09:49 INFO] Starting acquisition
[Status 02:09:49 INFO] reading housekeeping
[Status 02:10:07 INFO] acquire complete
[Status 02:10:08 INFO] writing housekeeping
[Sequencer 02:10:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:10:08 INFO] incremented X scene to 40 completed views
[Sequencer 02:10:08 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:10:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:10:08 INFO] incremented to [AERI set: name Y40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:10:08 INFO] X40.SIG(18)
[sigmove 02:10:08 DEBUG] transformed X40Ma.SPC -> X40MA.SPC
[sigmove 02:10:08 DEBUG] transformed X40Mb.SPC -> X40MB.SPC
[sigmove 02:10:08 DEBUG] transformed X40Mc.SPC -> X40MC.SPC
[sigmove 02:10:08 DEBUG] transformed X40Md.SPC -> X40MD.SPC
[sigmove 02:10:08 DEBUG] transformed X40Me.SPC -> X40ME.SPC
[sigmove 02:10:08 DEBUG] transformed X40Mf.SPC -> X40MF.SPC
[Status 02:10:08 INFO] data for X40 transferred to science data processing
[Tidy 02:10:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:10:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:10:08 INFO] resetting WatchDogTimer
[Status 02:10:08 INFO] Starting Set [AERI set: name Y40, 6 scans, 0 angle, D16300 command]
[Ingest 02:10:08 INFO] Sending XML status message
[Status 02:10:08 INFO] Mirror angle: 0
[Mirror 02:10:08 INFO] rotating to position Y
[Status 02:10:08 INFO] .SET file for ACQ96 ready
[Ingest 02:10:08 INFO] Starting acquisition
[Status 02:10:08 INFO] reading housekeeping
[Status 02:10:26 INFO] acquire complete
[Status 02:10:27 INFO] writing housekeeping
[Sequencer 02:10:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:10:27 INFO] incremented Y scene to 40 completed views
[Sequencer 02:10:27 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:10:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:10:27 INFO] incremented to [AERI set: name Z40, 6 scans, 0 angle, D16300 command] set
[sigmove 02:10:27 INFO] Y40.SIG(18)
[sigmove 02:10:27 DEBUG] transformed Y40Ma.SPC -> Y40MA.SPC
[sigmove 02:10:27 DEBUG] transformed Y40Mb.SPC -> Y40MB.SPC
[sigmove 02:10:27 DEBUG] transformed Y40Mc.SPC -> Y40MC.SPC
[sigmove 02:10:27 DEBUG] transformed Y40Md.SPC -> Y40MD.SPC
[sigmove 02:10:27 DEBUG] transformed Y40Me.SPC -> Y40ME.SPC
[sigmove 02:10:27 DEBUG] transformed Y40Mf.SPC -> Y40MF.SPC
[Status 02:10:27 INFO] data for Y40 transferred to science data processing
[Tidy 02:10:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:10:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:10:27 INFO] resetting WatchDogTimer
[Status 02:10:27 INFO] Starting Set [AERI set: name Z40, 6 scans, 0 angle, D16300 command]
[Ingest 02:10:27 INFO] Sending XML status message
[Status 02:10:27 INFO] Mirror angle: 0
[Mirror 02:10:27 INFO] rotating to position Z
[Status 02:10:27 INFO] .SET file for ACQ96 ready
[Ingest 02:10:27 INFO] Starting acquisition
[Status 02:10:27 INFO] reading housekeeping
[Status 02:10:46 INFO] acquire complete
[Status 02:10:46 INFO] writing housekeeping
[Sequencer 02:10:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:10:46 INFO] incremented Z scene to 40 completed views
[Sequencer 02:10:46 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:10:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:10:46 INFO] incremented to [AERI set: name H41, 6 scans, 60 angle, D22500 command] set
[sigmove 02:10:46 INFO] Z40.SIG(18)
[sigmove 02:10:46 DEBUG] transformed Z40Ma.SPC -> Z40MA.SPC
[sigmove 02:10:46 DEBUG] transformed Z40Mb.SPC -> Z40MB.SPC
[sigmove 02:10:46 DEBUG] transformed Z40Mc.SPC -> Z40MC.SPC
[sigmove 02:10:46 DEBUG] transformed Z40Md.SPC -> Z40MD.SPC
[sigmove 02:10:46 DEBUG] transformed Z40Me.SPC -> Z40ME.SPC
[sigmove 02:10:46 DEBUG] transformed Z40Mf.SPC -> Z40MF.SPC
[Status 02:10:46 INFO] data for Z40 transferred to science data processing
[Tidy 02:10:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:10:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:10:46 INFO] resetting WatchDogTimer
[Status 02:10:46 INFO] Starting Set [AERI set: name H41, 6 scans, 60 angle, D22500 command]
[Ingest 02:10:46 INFO] Sending XML status message
[Status 02:10:46 INFO] Mirror angle: 60
[Mirror 02:10:46 INFO] rotating to position H
[Status 02:10:47 INFO] .SET file for ACQ96 ready
[Ingest 02:10:47 INFO] Starting acquisition
[Status 02:10:47 INFO] reading housekeeping
[Status 02:11:05 INFO] acquire complete
[Status 02:11:06 INFO] writing housekeeping
[Sequencer 02:11:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:11:06 INFO] incremented H scene to 41 completed views
[Sequencer 02:11:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:11:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:11:06 INFO] incremented to [AERI set: name A41, 6 scans, 120 angle, D28300 command] set
[sigmove 02:11:06 INFO] H41.SIG(18)
[sigmove 02:11:06 DEBUG] transformed H41Ma.SPC -> H41MA.SPC
[sigmove 02:11:06 DEBUG] transformed H41Mb.SPC -> H41MB.SPC
[sigmove 02:11:06 DEBUG] transformed H41Mc.SPC -> H41MC.SPC
[sigmove 02:11:06 DEBUG] transformed H41Md.SPC -> H41MD.SPC
[sigmove 02:11:06 DEBUG] transformed H41Me.SPC -> H41ME.SPC
[sigmove 02:11:06 DEBUG] transformed H41Mf.SPC -> H41MF.SPC
[Status 02:11:06 INFO] data for H41 transferred to science data processing
[Tidy 02:11:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:11:06 INFO] A39.FIN(19),H39.FIN(19),S39.FIN(19),T39.FIN(19),U39.FIN(19),V39.FIN(19),W39.FIN(19),X39.FIN(19),Y39.FIN(19),Z39.FIN(19),A40.FIN(19),H40.FIN(19),S40.FIN(19),T40.FIN(19),U40.FIN(19),V40.FIN(19),W40.FIN(19),X40.FIN(19),Y40.FIN(19),Z40.FIN(19)
[sigmove 02:11:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:11:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:11:07 DEBUG] done zipping
[WatchDog 02:11:07 INFO] resetting WatchDogTimer
[Status 02:11:07 INFO] Starting Set [AERI set: name A41, 6 scans, 120 angle, D28300 command]
[Ingest 02:11:07 INFO] Sending XML status message
[Status 02:11:07 INFO] Mirror angle: 120
[Mirror 02:11:07 INFO] rotating to position A
[Status 02:11:08 INFO] .SET file for ACQ96 ready
[Ingest 02:11:08 INFO] Starting acquisition
[Status 02:11:08 INFO] reading housekeeping
[Status 02:11:26 INFO] acquire complete
[Status 02:11:26 INFO] writing housekeeping
[Sequencer 02:11:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:11:26 INFO] incremented A scene to 41 completed views
[Sequencer 02:11:26 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:11:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:11:26 INFO] incremented to [AERI set: name S41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:11:26 INFO] A41.SIG(18)
[sigmove 02:11:26 DEBUG] transformed A41Ma.SPC -> A41MA.SPC
[sigmove 02:11:26 DEBUG] transformed A41Mb.SPC -> A41MB.SPC
[sigmove 02:11:26 DEBUG] transformed A41Mc.SPC -> A41MC.SPC
[sigmove 02:11:26 DEBUG] transformed A41Md.SPC -> A41MD.SPC
[sigmove 02:11:26 DEBUG] transformed A41Me.SPC -> A41ME.SPC
[sigmove 02:11:26 DEBUG] transformed A41Mf.SPC -> A41MF.SPC
[Status 02:11:26 INFO] data for A41 transferred to science data processing
[Tidy 02:11:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:11:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:11:26 INFO] resetting WatchDogTimer
[Status 02:11:26 INFO] Starting Set [AERI set: name S41, 6 scans, 0 angle, D16300 command]
[Ingest 02:11:26 INFO] Sending XML status message
[Status 02:11:26 INFO] Mirror angle: 0
[Mirror 02:11:27 INFO] rotating to position S
[Status 02:11:28 INFO] .SET file for ACQ96 ready
[Ingest 02:11:28 INFO] Starting acquisition
[Status 02:11:28 INFO] reading housekeeping
[Status 02:11:46 INFO] acquire complete
[Status 02:11:46 INFO] writing housekeeping
[Sequencer 02:11:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:11:46 INFO] incremented S scene to 41 completed views
[Sequencer 02:11:46 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:11:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:11:46 INFO] incremented to [AERI set: name T41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:11:47 INFO] S41.SIG(18)
[sigmove 02:11:47 DEBUG] transformed S41Ma.SPC -> S41MA.SPC
[sigmove 02:11:47 DEBUG] transformed S41Mb.SPC -> S41MB.SPC
[sigmove 02:11:47 DEBUG] transformed S41Mc.SPC -> S41MC.SPC
[sigmove 02:11:47 DEBUG] transformed S41Md.SPC -> S41MD.SPC
[sigmove 02:11:47 DEBUG] transformed S41Me.SPC -> S41ME.SPC
[sigmove 02:11:47 DEBUG] transformed S41Mf.SPC -> S41MF.SPC
[Status 02:11:47 INFO] data for S41 transferred to science data processing
[Tidy 02:11:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:11:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:11:47 INFO] resetting WatchDogTimer
[Status 02:11:47 INFO] Starting Set [AERI set: name T41, 6 scans, 0 angle, D16300 command]
[Ingest 02:11:47 INFO] Sending XML status message
[Status 02:11:47 INFO] Mirror angle: 0
[Mirror 02:11:47 INFO] rotating to position T
[Status 02:11:47 INFO] .SET file for ACQ96 ready
[Ingest 02:11:47 INFO] Starting acquisition
[Status 02:11:47 INFO] reading housekeeping
[Status 02:12:05 INFO] acquire complete
[Status 02:12:06 INFO] writing housekeeping
[Sequencer 02:12:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:12:06 INFO] incremented T scene to 41 completed views
[Sequencer 02:12:06 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:12:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:12:06 INFO] incremented to [AERI set: name U41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:12:06 INFO] T41.SIG(18)
[sigmove 02:12:06 DEBUG] transformed T41Ma.SPC -> T41MA.SPC
[sigmove 02:12:06 DEBUG] transformed T41Mb.SPC -> T41MB.SPC
[sigmove 02:12:06 DEBUG] transformed T41Mc.SPC -> T41MC.SPC
[sigmove 02:12:06 DEBUG] transformed T41Md.SPC -> T41MD.SPC
[sigmove 02:12:06 DEBUG] transformed T41Me.SPC -> T41ME.SPC
[sigmove 02:12:06 DEBUG] transformed T41Mf.SPC -> T41MF.SPC
[Status 02:12:06 INFO] data for T41 transferred to science data processing
[Tidy 02:12:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:12:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:12:06 INFO] resetting WatchDogTimer
[Status 02:12:06 INFO] Starting Set [AERI set: name U41, 6 scans, 0 angle, D16300 command]
[Ingest 02:12:06 INFO] Sending XML status message
[Status 02:12:06 INFO] Mirror angle: 0
[Mirror 02:12:06 INFO] rotating to position U
[Status 02:12:06 INFO] .SET file for ACQ96 ready
[Ingest 02:12:06 INFO] Starting acquisition
[Status 02:12:06 INFO] reading housekeeping
[Status 02:12:24 INFO] acquire complete
[Status 02:12:25 INFO] writing housekeeping
[Sequencer 02:12:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:12:25 INFO] incremented U scene to 41 completed views
[Sequencer 02:12:25 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:12:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:12:25 INFO] incremented to [AERI set: name V41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:12:25 INFO] U41.SIG(18)
[sigmove 02:12:25 DEBUG] transformed U41Ma.SPC -> U41MA.SPC
[sigmove 02:12:25 DEBUG] transformed U41Mb.SPC -> U41MB.SPC
[sigmove 02:12:25 DEBUG] transformed U41Mc.SPC -> U41MC.SPC
[sigmove 02:12:25 DEBUG] transformed U41Md.SPC -> U41MD.SPC
[sigmove 02:12:25 DEBUG] transformed U41Me.SPC -> U41ME.SPC
[sigmove 02:12:25 DEBUG] transformed U41Mf.SPC -> U41MF.SPC
[Status 02:12:25 INFO] data for U41 transferred to science data processing
[Tidy 02:12:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:12:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:12:25 INFO] resetting WatchDogTimer
[Status 02:12:25 INFO] Starting Set [AERI set: name V41, 6 scans, 0 angle, D16300 command]
[Ingest 02:12:25 INFO] Sending XML status message
[Status 02:12:25 INFO] Mirror angle: 0
[Mirror 02:12:25 INFO] rotating to position V
[Status 02:12:25 INFO] .SET file for ACQ96 ready
[Ingest 02:12:25 INFO] Starting acquisition
[Status 02:12:25 INFO] reading housekeeping
[Status 02:12:43 INFO] acquire complete
[Status 02:12:44 INFO] writing housekeeping
[Sequencer 02:12:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:12:44 INFO] incremented V scene to 41 completed views
[Sequencer 02:12:44 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:12:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:12:44 INFO] incremented to [AERI set: name W41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:12:44 INFO] V41.SIG(18)
[sigmove 02:12:44 DEBUG] transformed V41Ma.SPC -> V41MA.SPC
[sigmove 02:12:44 DEBUG] transformed V41Mb.SPC -> V41MB.SPC
[sigmove 02:12:44 DEBUG] transformed V41Mc.SPC -> V41MC.SPC
[sigmove 02:12:44 DEBUG] transformed V41Md.SPC -> V41MD.SPC
[sigmove 02:12:44 DEBUG] transformed V41Me.SPC -> V41ME.SPC
[sigmove 02:12:44 DEBUG] transformed V41Mf.SPC -> V41MF.SPC
[Status 02:12:44 INFO] data for V41 transferred to science data processing
[Tidy 02:12:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:12:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:12:44 INFO] resetting WatchDogTimer
[Status 02:12:44 INFO] Starting Set [AERI set: name W41, 6 scans, 0 angle, D16300 command]
[Ingest 02:12:44 INFO] Sending XML status message
[Status 02:12:44 INFO] Mirror angle: 0
[Mirror 02:12:44 INFO] rotating to position W
[Status 02:12:44 INFO] .SET file for ACQ96 ready
[Ingest 02:12:44 INFO] Starting acquisition
[Status 02:12:44 INFO] reading housekeeping
[Status 02:13:02 INFO] acquire complete
[Status 02:13:03 INFO] writing housekeeping
[Sequencer 02:13:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:13:03 INFO] incremented W scene to 41 completed views
[Sequencer 02:13:03 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:13:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:13:03 INFO] incremented to [AERI set: name X41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:13:03 INFO] W41.SIG(18)
[sigmove 02:13:03 DEBUG] transformed W41Ma.SPC -> W41MA.SPC
[sigmove 02:13:03 DEBUG] transformed W41Mb.SPC -> W41MB.SPC
[sigmove 02:13:03 DEBUG] transformed W41Mc.SPC -> W41MC.SPC
[sigmove 02:13:03 DEBUG] transformed W41Md.SPC -> W41MD.SPC
[sigmove 02:13:03 DEBUG] transformed W41Me.SPC -> W41ME.SPC
[sigmove 02:13:03 DEBUG] transformed W41Mf.SPC -> W41MF.SPC
[Status 02:13:03 INFO] data for W41 transferred to science data processing
[Tidy 02:13:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:13:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:13:03 INFO] resetting WatchDogTimer
[Status 02:13:03 INFO] Starting Set [AERI set: name X41, 6 scans, 0 angle, D16300 command]
[Ingest 02:13:03 INFO] Sending XML status message
[Status 02:13:03 INFO] Mirror angle: 0
[Mirror 02:13:03 INFO] rotating to position X
[Status 02:13:03 INFO] .SET file for ACQ96 ready
[Ingest 02:13:03 INFO] Starting acquisition
[Status 02:13:03 INFO] reading housekeeping
[Status 02:13:22 INFO] acquire complete
[Status 02:13:22 INFO] writing housekeeping
[Sequencer 02:13:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:13:22 INFO] incremented X scene to 41 completed views
[Sequencer 02:13:22 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:13:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:13:22 INFO] incremented to [AERI set: name Y41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:13:22 INFO] X41.SIG(18)
[sigmove 02:13:22 DEBUG] transformed X41Ma.SPC -> X41MA.SPC
[sigmove 02:13:22 DEBUG] transformed X41Mb.SPC -> X41MB.SPC
[sigmove 02:13:22 DEBUG] transformed X41Mc.SPC -> X41MC.SPC
[sigmove 02:13:22 DEBUG] transformed X41Md.SPC -> X41MD.SPC
[sigmove 02:13:22 DEBUG] transformed X41Me.SPC -> X41ME.SPC
[sigmove 02:13:22 DEBUG] transformed X41Mf.SPC -> X41MF.SPC
[Status 02:13:22 INFO] data for X41 transferred to science data processing
[Tidy 02:13:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:13:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:13:22 INFO] resetting WatchDogTimer
[Status 02:13:22 INFO] Starting Set [AERI set: name Y41, 6 scans, 0 angle, D16300 command]
[Ingest 02:13:22 INFO] Sending XML status message
[Status 02:13:22 INFO] Mirror angle: 0
[Mirror 02:13:22 INFO] rotating to position Y
[Status 02:13:22 INFO] .SET file for ACQ96 ready
[Ingest 02:13:22 INFO] Starting acquisition
[Status 02:13:23 INFO] reading housekeeping
[Status 02:13:41 INFO] acquire complete
[Status 02:13:41 INFO] writing housekeeping
[Sequencer 02:13:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:13:41 INFO] incremented Y scene to 41 completed views
[Sequencer 02:13:41 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:13:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:13:41 INFO] incremented to [AERI set: name Z41, 6 scans, 0 angle, D16300 command] set
[sigmove 02:13:41 INFO] Y41.SIG(18)
[sigmove 02:13:41 DEBUG] transformed Y41Ma.SPC -> Y41MA.SPC
[sigmove 02:13:41 DEBUG] transformed Y41Mb.SPC -> Y41MB.SPC
[sigmove 02:13:41 DEBUG] transformed Y41Mc.SPC -> Y41MC.SPC
[sigmove 02:13:41 DEBUG] transformed Y41Md.SPC -> Y41MD.SPC
[sigmove 02:13:41 DEBUG] transformed Y41Me.SPC -> Y41ME.SPC
[sigmove 02:13:41 DEBUG] transformed Y41Mf.SPC -> Y41MF.SPC
[Status 02:13:41 INFO] data for Y41 transferred to science data processing
[Tidy 02:13:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:13:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:13:41 INFO] resetting WatchDogTimer
[Status 02:13:41 INFO] Starting Set [AERI set: name Z41, 6 scans, 0 angle, D16300 command]
[Ingest 02:13:41 INFO] Sending XML status message
[Status 02:13:41 INFO] Mirror angle: 0
[Mirror 02:13:41 INFO] rotating to position Z
[Status 02:13:41 INFO] .SET file for ACQ96 ready
[Ingest 02:13:42 INFO] Starting acquisition
[Status 02:13:42 INFO] reading housekeeping
[Status 02:14:00 INFO] acquire complete
[Status 02:14:00 INFO] writing housekeeping
[Sequencer 02:14:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:14:00 INFO] incremented Z scene to 41 completed views
[Sequencer 02:14:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:14:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:14:00 INFO] incremented to [AERI set: name A42, 6 scans, 120 angle, D28300 command] set
[sigmove 02:14:00 INFO] Z41.SIG(18)
[sigmove 02:14:00 DEBUG] transformed Z41Ma.SPC -> Z41MA.SPC
[sigmove 02:14:00 DEBUG] transformed Z41Mb.SPC -> Z41MB.SPC
[sigmove 02:14:00 DEBUG] transformed Z41Mc.SPC -> Z41MC.SPC
[sigmove 02:14:00 DEBUG] transformed Z41Md.SPC -> Z41MD.SPC
[sigmove 02:14:00 DEBUG] transformed Z41Me.SPC -> Z41ME.SPC
[sigmove 02:14:00 DEBUG] transformed Z41Mf.SPC -> Z41MF.SPC
[Status 02:14:00 INFO] data for Z41 transferred to science data processing
[Tidy 02:14:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:14:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:14:00 INFO] resetting WatchDogTimer
[Status 02:14:00 INFO] Starting Set [AERI set: name A42, 6 scans, 120 angle, D28300 command]
[Ingest 02:14:00 INFO] Sending XML status message
[Status 02:14:00 INFO] Mirror angle: 120
[Mirror 02:14:00 INFO] rotating to position A
[Status 02:14:02 INFO] .SET file for ACQ96 ready
[Ingest 02:14:02 INFO] Starting acquisition
[Status 02:14:02 INFO] reading housekeeping
[Status 02:14:20 INFO] acquire complete
[Status 02:14:20 INFO] writing housekeeping
[Sequencer 02:14:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:14:20 INFO] incremented A scene to 42 completed views
[Sequencer 02:14:20 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:14:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:14:20 INFO] incremented to [AERI set: name H42, 6 scans, 60 angle, D22500 command] set
[sigmove 02:14:20 INFO] A42.SIG(18)
[sigmove 02:14:20 DEBUG] transformed A42Ma.SPC -> A42MA.SPC
[sigmove 02:14:20 DEBUG] transformed A42Mb.SPC -> A42MB.SPC
[sigmove 02:14:20 DEBUG] transformed A42Mc.SPC -> A42MC.SPC
[sigmove 02:14:20 DEBUG] transformed A42Md.SPC -> A42MD.SPC
[sigmove 02:14:20 DEBUG] transformed A42Me.SPC -> A42ME.SPC
[sigmove 02:14:20 DEBUG] transformed A42Mf.SPC -> A42MF.SPC
[Status 02:14:20 INFO] data for A42 transferred to science data processing
[Tidy 02:14:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:14:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:14:20 INFO] resetting WatchDogTimer
[Status 02:14:20 INFO] Starting Set [AERI set: name H42, 6 scans, 60 angle, D22500 command]
[Ingest 02:14:20 INFO] Sending XML status message
[Status 02:14:20 INFO] Mirror angle: 60
[Mirror 02:14:21 INFO] rotating to position H
[Status 02:14:21 INFO] .SET file for ACQ96 ready
[Ingest 02:14:21 INFO] Starting acquisition
[Status 02:14:21 INFO] reading housekeeping
[Status 02:14:39 INFO] acquire complete
[Status 02:14:39 INFO] writing housekeeping
[Sequencer 02:14:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:14:39 INFO] incremented H scene to 42 completed views
[Sequencer 02:14:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:14:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:14:39 INFO] incremented to [AERI set: name S42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:14:39 INFO] H42.SIG(18)
[sigmove 02:14:39 DEBUG] transformed H42Ma.SPC -> H42MA.SPC
[sigmove 02:14:39 DEBUG] transformed H42Mb.SPC -> H42MB.SPC
[sigmove 02:14:39 DEBUG] transformed H42Mc.SPC -> H42MC.SPC
[sigmove 02:14:39 DEBUG] transformed H42Md.SPC -> H42MD.SPC
[sigmove 02:14:39 DEBUG] transformed H42Me.SPC -> H42ME.SPC
[sigmove 02:14:39 DEBUG] transformed H42Mf.SPC -> H42MF.SPC
[Status 02:14:39 INFO] data for H42 transferred to science data processing
[Tidy 02:14:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:14:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:14:39 INFO] resetting WatchDogTimer
[Status 02:14:39 INFO] Starting Set [AERI set: name S42, 6 scans, 0 angle, D16300 command]
[Ingest 02:14:40 INFO] Sending XML status message
[Status 02:14:40 INFO] Mirror angle: 0
[Mirror 02:14:40 INFO] rotating to position S
[Status 02:14:40 INFO] .SET file for ACQ96 ready
[Ingest 02:14:40 INFO] Starting acquisition
[Status 02:14:41 INFO] reading housekeeping
[Status 02:14:58 INFO] acquire complete
[Status 02:14:58 INFO] writing housekeeping
[Sequencer 02:14:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:14:58 INFO] incremented S scene to 42 completed views
[Sequencer 02:14:58 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:14:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:14:58 INFO] incremented to [AERI set: name T42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:14:58 INFO] S42.SIG(18)
[sigmove 02:14:58 DEBUG] transformed S42Ma.SPC -> S42MA.SPC
[sigmove 02:14:58 DEBUG] transformed S42Mb.SPC -> S42MB.SPC
[sigmove 02:14:58 DEBUG] transformed S42Mc.SPC -> S42MC.SPC
[sigmove 02:14:58 DEBUG] transformed S42Md.SPC -> S42MD.SPC
[sigmove 02:14:58 DEBUG] transformed S42Me.SPC -> S42ME.SPC
[sigmove 02:14:58 DEBUG] transformed S42Mf.SPC -> S42MF.SPC
[Status 02:14:58 INFO] data for S42 transferred to science data processing
[Tidy 02:14:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:14:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:14:59 INFO] resetting WatchDogTimer
[Status 02:14:59 INFO] Starting Set [AERI set: name T42, 6 scans, 0 angle, D16300 command]
[Ingest 02:14:59 INFO] Sending XML status message
[Status 02:14:59 INFO] Mirror angle: 0
[Mirror 02:14:59 INFO] rotating to position T
[Status 02:14:59 INFO] .SET file for ACQ96 ready
[Ingest 02:14:59 INFO] Starting acquisition
[Status 02:14:59 INFO] reading housekeeping
[Status 02:15:17 INFO] acquire complete
[Status 02:15:18 INFO] writing housekeeping
[Sequencer 02:15:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:15:18 INFO] incremented T scene to 42 completed views
[Sequencer 02:15:18 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:15:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:15:18 INFO] incremented to [AERI set: name U42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:15:18 INFO] T42.SIG(18)
[sigmove 02:15:18 DEBUG] transformed T42Ma.SPC -> T42MA.SPC
[sigmove 02:15:18 DEBUG] transformed T42Mb.SPC -> T42MB.SPC
[sigmove 02:15:18 DEBUG] transformed T42Mc.SPC -> T42MC.SPC
[sigmove 02:15:18 DEBUG] transformed T42Md.SPC -> T42MD.SPC
[sigmove 02:15:18 DEBUG] transformed T42Me.SPC -> T42ME.SPC
[sigmove 02:15:18 DEBUG] transformed T42Mf.SPC -> T42MF.SPC
[Status 02:15:18 INFO] data for T42 transferred to science data processing
[Tidy 02:15:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:15:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:15:18 INFO] resetting WatchDogTimer
[Status 02:15:18 INFO] Starting Set [AERI set: name U42, 6 scans, 0 angle, D16300 command]
[Ingest 02:15:18 INFO] Sending XML status message
[Status 02:15:18 INFO] Mirror angle: 0
[Mirror 02:15:18 INFO] rotating to position U
[Status 02:15:18 INFO] .SET file for ACQ96 ready
[Ingest 02:15:18 INFO] Starting acquisition
[Status 02:15:18 INFO] reading housekeeping
[Status 02:15:36 INFO] acquire complete
[Status 02:15:37 INFO] writing housekeeping
[Sequencer 02:15:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:15:37 INFO] incremented U scene to 42 completed views
[Sequencer 02:15:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:15:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:15:37 INFO] incremented to [AERI set: name V42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:15:37 INFO] U42.SIG(18)
[sigmove 02:15:37 DEBUG] transformed U42Ma.SPC -> U42MA.SPC
[sigmove 02:15:37 DEBUG] transformed U42Mb.SPC -> U42MB.SPC
[sigmove 02:15:37 DEBUG] transformed U42Mc.SPC -> U42MC.SPC
[sigmove 02:15:37 DEBUG] transformed U42Md.SPC -> U42MD.SPC
[sigmove 02:15:37 DEBUG] transformed U42Me.SPC -> U42ME.SPC
[sigmove 02:15:37 DEBUG] transformed U42Mf.SPC -> U42MF.SPC
[Status 02:15:37 INFO] data for U42 transferred to science data processing
[Tidy 02:15:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:15:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:15:37 INFO] resetting WatchDogTimer
[Status 02:15:37 INFO] Starting Set [AERI set: name V42, 6 scans, 0 angle, D16300 command]
[Ingest 02:15:37 INFO] Sending XML status message
[Status 02:15:37 INFO] Mirror angle: 0
[Mirror 02:15:37 INFO] rotating to position V
[Status 02:15:37 INFO] .SET file for ACQ96 ready
[Ingest 02:15:37 INFO] Starting acquisition
[Status 02:15:37 INFO] reading housekeeping
[Status 02:15:55 INFO] acquire complete
[Status 02:15:56 INFO] writing housekeeping
[Sequencer 02:15:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:15:56 INFO] incremented V scene to 42 completed views
[Sequencer 02:15:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:15:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:15:56 INFO] incremented to [AERI set: name W42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:15:56 INFO] V42.SIG(18)
[sigmove 02:15:56 DEBUG] transformed V42Ma.SPC -> V42MA.SPC
[sigmove 02:15:56 DEBUG] transformed V42Mb.SPC -> V42MB.SPC
[sigmove 02:15:56 DEBUG] transformed V42Mc.SPC -> V42MC.SPC
[sigmove 02:15:56 DEBUG] transformed V42Md.SPC -> V42MD.SPC
[sigmove 02:15:56 DEBUG] transformed V42Me.SPC -> V42ME.SPC
[sigmove 02:15:56 DEBUG] transformed V42Mf.SPC -> V42MF.SPC
[Status 02:15:56 INFO] data for V42 transferred to science data processing
[Tidy 02:15:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:15:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:15:56 INFO] resetting WatchDogTimer
[Status 02:15:56 INFO] Starting Set [AERI set: name W42, 6 scans, 0 angle, D16300 command]
[Ingest 02:15:56 INFO] Sending XML status message
[Status 02:15:56 INFO] Mirror angle: 0
[Mirror 02:15:56 INFO] rotating to position W
[Status 02:15:56 INFO] .SET file for ACQ96 ready
[Ingest 02:15:56 INFO] Starting acquisition
[Status 02:15:56 INFO] reading housekeeping
[Status 02:16:14 INFO] acquire complete
[Status 02:16:16 INFO] writing housekeeping
[Sequencer 02:16:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:16:16 INFO] incremented W scene to 42 completed views
[Sequencer 02:16:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:16:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:16:16 INFO] incremented to [AERI set: name X42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:16:16 INFO] W42.SIG(18)
[sigmove 02:16:16 DEBUG] transformed W42Ma.SPC -> W42MA.SPC
[sigmove 02:16:16 DEBUG] transformed W42Mb.SPC -> W42MB.SPC
[sigmove 02:16:16 DEBUG] transformed W42Mc.SPC -> W42MC.SPC
[sigmove 02:16:16 DEBUG] transformed W42Md.SPC -> W42MD.SPC
[sigmove 02:16:16 DEBUG] transformed W42Me.SPC -> W42ME.SPC
[sigmove 02:16:16 DEBUG] transformed W42Mf.SPC -> W42MF.SPC
[Status 02:16:16 INFO] data for W42 transferred to science data processing
[Tidy 02:16:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:16:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:16:16 INFO] resetting WatchDogTimer
[Status 02:16:16 INFO] Starting Set [AERI set: name X42, 6 scans, 0 angle, D16300 command]
[Ingest 02:16:16 INFO] Sending XML status message
[Status 02:16:16 INFO] Mirror angle: 0
[Mirror 02:16:16 INFO] rotating to position X
[Status 02:16:16 INFO] .SET file for ACQ96 ready
[Ingest 02:16:16 INFO] Starting acquisition
[Status 02:16:16 INFO] reading housekeeping
[Status 02:16:35 INFO] acquire complete
[Status 02:16:35 INFO] writing housekeeping
[Sequencer 02:16:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:16:35 INFO] incremented X scene to 42 completed views
[Sequencer 02:16:35 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:16:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:16:35 INFO] incremented to [AERI set: name Y42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:16:35 INFO] X42.SIG(18)
[sigmove 02:16:35 DEBUG] transformed X42Ma.SPC -> X42MA.SPC
[sigmove 02:16:35 DEBUG] transformed X42Mb.SPC -> X42MB.SPC
[sigmove 02:16:35 DEBUG] transformed X42Mc.SPC -> X42MC.SPC
[sigmove 02:16:35 DEBUG] transformed X42Md.SPC -> X42MD.SPC
[sigmove 02:16:35 DEBUG] transformed X42Me.SPC -> X42ME.SPC
[sigmove 02:16:35 DEBUG] transformed X42Mf.SPC -> X42MF.SPC
[Status 02:16:35 INFO] data for X42 transferred to science data processing
[Tidy 02:16:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:16:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:16:35 INFO] resetting WatchDogTimer
[Status 02:16:35 INFO] Starting Set [AERI set: name Y42, 6 scans, 0 angle, D16300 command]
[Ingest 02:16:35 INFO] Sending XML status message
[Status 02:16:35 INFO] Mirror angle: 0
[Mirror 02:16:35 INFO] rotating to position Y
[Status 02:16:35 INFO] .SET file for ACQ96 ready
[Ingest 02:16:36 INFO] Starting acquisition
[Status 02:16:36 INFO] reading housekeeping
[Status 02:16:54 INFO] acquire complete
[Status 02:16:54 INFO] writing housekeeping
[Sequencer 02:16:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:16:54 INFO] incremented Y scene to 42 completed views
[Sequencer 02:16:54 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:16:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:16:54 INFO] incremented to [AERI set: name Z42, 6 scans, 0 angle, D16300 command] set
[sigmove 02:16:54 INFO] Y42.SIG(18)
[sigmove 02:16:54 DEBUG] transformed Y42Ma.SPC -> Y42MA.SPC
[sigmove 02:16:54 DEBUG] transformed Y42Mb.SPC -> Y42MB.SPC
[sigmove 02:16:54 DEBUG] transformed Y42Mc.SPC -> Y42MC.SPC
[sigmove 02:16:54 DEBUG] transformed Y42Md.SPC -> Y42MD.SPC
[sigmove 02:16:54 DEBUG] transformed Y42Me.SPC -> Y42ME.SPC
[sigmove 02:16:54 DEBUG] transformed Y42Mf.SPC -> Y42MF.SPC
[Status 02:16:54 INFO] data for Y42 transferred to science data processing
[Tidy 02:16:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:16:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:16:54 INFO] resetting WatchDogTimer
[Status 02:16:54 INFO] Starting Set [AERI set: name Z42, 6 scans, 0 angle, D16300 command]
[Ingest 02:16:54 INFO] Sending XML status message
[Status 02:16:54 INFO] Mirror angle: 0
[Mirror 02:16:54 INFO] rotating to position Z
[Status 02:16:55 INFO] .SET file for ACQ96 ready
[Ingest 02:16:55 INFO] Starting acquisition
[Status 02:16:55 INFO] reading housekeeping
[Status 02:17:13 INFO] acquire complete
[Status 02:17:13 INFO] writing housekeeping
[Sequencer 02:17:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:17:13 INFO] incremented Z scene to 42 completed views
[Sequencer 02:17:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:17:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:17:13 INFO] incremented to [AERI set: name H43, 6 scans, 60 angle, D22500 command] set
[sigmove 02:17:13 INFO] Z42.SIG(18)
[sigmove 02:17:13 DEBUG] transformed Z42Ma.SPC -> Z42MA.SPC
[sigmove 02:17:13 DEBUG] transformed Z42Mb.SPC -> Z42MB.SPC
[sigmove 02:17:13 DEBUG] transformed Z42Mc.SPC -> Z42MC.SPC
[sigmove 02:17:13 DEBUG] transformed Z42Md.SPC -> Z42MD.SPC
[sigmove 02:17:13 DEBUG] transformed Z42Me.SPC -> Z42ME.SPC
[sigmove 02:17:13 DEBUG] transformed Z42Mf.SPC -> Z42MF.SPC
[Status 02:17:13 INFO] data for Z42 transferred to science data processing
[Tidy 02:17:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:17:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:17:13 INFO] resetting WatchDogTimer
[Status 02:17:13 INFO] Starting Set [AERI set: name H43, 6 scans, 60 angle, D22500 command]
[Ingest 02:17:13 INFO] Sending XML status message
[Status 02:17:13 INFO] Mirror angle: 60
[Mirror 02:17:13 INFO] rotating to position H
[Status 02:17:14 INFO] .SET file for ACQ96 ready
[Ingest 02:17:14 INFO] Starting acquisition
[Status 02:17:14 INFO] reading housekeeping
[Status 02:17:32 INFO] acquire complete
[Status 02:17:32 INFO] writing housekeeping
[Sequencer 02:17:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:17:32 INFO] incremented H scene to 43 completed views
[Sequencer 02:17:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:17:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:17:32 INFO] incremented to [AERI set: name A43, 6 scans, 120 angle, D28300 command] set
[sigmove 02:17:32 INFO] H43.SIG(18)
[sigmove 02:17:32 DEBUG] transformed H43Ma.SPC -> H43MA.SPC
[sigmove 02:17:32 DEBUG] transformed H43Mb.SPC -> H43MB.SPC
[sigmove 02:17:32 DEBUG] transformed H43Mc.SPC -> H43MC.SPC
[sigmove 02:17:32 DEBUG] transformed H43Md.SPC -> H43MD.SPC
[sigmove 02:17:32 DEBUG] transformed H43Me.SPC -> H43ME.SPC
[sigmove 02:17:32 DEBUG] transformed H43Mf.SPC -> H43MF.SPC
[Status 02:17:32 INFO] data for H43 transferred to science data processing
[Tidy 02:17:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:17:32 INFO] A41.FIN(19),H41.FIN(19),S41.FIN(19),T41.FIN(19),U41.FIN(19),V41.FIN(19),W41.FIN(19),X41.FIN(19),Y41.FIN(19),Z41.FIN(19),A42.FIN(19),H42.FIN(19),S42.FIN(19),T42.FIN(19),U42.FIN(19),V42.FIN(19),W42.FIN(19),X42.FIN(19),Y42.FIN(19),Z42.FIN(19)
[sigmove 02:17:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:17:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:17:33 DEBUG] done zipping
[WatchDog 02:17:33 INFO] resetting WatchDogTimer
[Status 02:17:34 INFO] Starting Set [AERI set: name A43, 6 scans, 120 angle, D28300 command]
[Ingest 02:17:34 INFO] Sending XML status message
[Status 02:17:34 INFO] Mirror angle: 120
[Mirror 02:17:34 INFO] rotating to position A
[Status 02:17:34 INFO] .SET file for ACQ96 ready
[Ingest 02:17:34 INFO] Starting acquisition
[Status 02:17:35 INFO] reading housekeeping
[Status 02:17:52 INFO] acquire complete
[Status 02:17:52 INFO] writing housekeeping
[Sequencer 02:17:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:17:52 INFO] incremented A scene to 43 completed views
[Sequencer 02:17:52 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:17:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:17:52 INFO] incremented to [AERI set: name S43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:17:52 INFO] A43.SIG(18)
[sigmove 02:17:53 DEBUG] transformed A43Ma.SPC -> A43MA.SPC
[sigmove 02:17:53 DEBUG] transformed A43Mb.SPC -> A43MB.SPC
[sigmove 02:17:53 DEBUG] transformed A43Mc.SPC -> A43MC.SPC
[sigmove 02:17:53 DEBUG] transformed A43Md.SPC -> A43MD.SPC
[sigmove 02:17:53 DEBUG] transformed A43Me.SPC -> A43ME.SPC
[sigmove 02:17:53 DEBUG] transformed A43Mf.SPC -> A43MF.SPC
[Status 02:17:53 INFO] data for A43 transferred to science data processing
[Tidy 02:17:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:17:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:17:53 INFO] resetting WatchDogTimer
[Status 02:17:53 INFO] Starting Set [AERI set: name S43, 6 scans, 0 angle, D16300 command]
[Ingest 02:17:53 INFO] Sending XML status message
[Status 02:17:53 INFO] Mirror angle: 0
[Mirror 02:17:53 INFO] rotating to position S
[Status 02:17:54 INFO] .SET file for ACQ96 ready
[Ingest 02:17:54 INFO] Starting acquisition
[Status 02:17:54 INFO] reading housekeeping
[Status 02:18:12 INFO] acquire complete
[Status 02:18:13 INFO] writing housekeeping
[Sequencer 02:18:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:18:13 INFO] incremented S scene to 43 completed views
[Sequencer 02:18:13 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:18:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:18:13 INFO] incremented to [AERI set: name T43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:18:13 INFO] S43.SIG(18)
[sigmove 02:18:13 DEBUG] transformed S43Ma.SPC -> S43MA.SPC
[sigmove 02:18:13 DEBUG] transformed S43Mb.SPC -> S43MB.SPC
[sigmove 02:18:13 DEBUG] transformed S43Mc.SPC -> S43MC.SPC
[sigmove 02:18:13 DEBUG] transformed S43Md.SPC -> S43MD.SPC
[sigmove 02:18:13 DEBUG] transformed S43Me.SPC -> S43ME.SPC
[sigmove 02:18:13 DEBUG] transformed S43Mf.SPC -> S43MF.SPC
[Status 02:18:13 INFO] data for S43 transferred to science data processing
[Tidy 02:18:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:18:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:18:13 INFO] resetting WatchDogTimer
[Status 02:18:13 INFO] Starting Set [AERI set: name T43, 6 scans, 0 angle, D16300 command]
[Ingest 02:18:13 INFO] Sending XML status message
[Status 02:18:13 INFO] Mirror angle: 0
[Mirror 02:18:13 INFO] rotating to position T
[Status 02:18:13 INFO] .SET file for ACQ96 ready
[Ingest 02:18:13 INFO] Starting acquisition
[Status 02:18:13 INFO] reading housekeeping
[Status 02:18:31 INFO] acquire complete
[Status 02:18:32 INFO] writing housekeeping
[Sequencer 02:18:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:18:32 INFO] incremented T scene to 43 completed views
[Sequencer 02:18:32 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:18:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:18:32 INFO] incremented to [AERI set: name U43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:18:32 INFO] T43.SIG(18)
[sigmove 02:18:32 DEBUG] transformed T43Ma.SPC -> T43MA.SPC
[sigmove 02:18:32 DEBUG] transformed T43Mb.SPC -> T43MB.SPC
[sigmove 02:18:32 DEBUG] transformed T43Mc.SPC -> T43MC.SPC
[sigmove 02:18:32 DEBUG] transformed T43Md.SPC -> T43MD.SPC
[sigmove 02:18:32 DEBUG] transformed T43Me.SPC -> T43ME.SPC
[sigmove 02:18:32 DEBUG] transformed T43Mf.SPC -> T43MF.SPC
[Status 02:18:32 INFO] data for T43 transferred to science data processing
[Tidy 02:18:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:18:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:18:32 INFO] resetting WatchDogTimer
[Status 02:18:32 INFO] Starting Set [AERI set: name U43, 6 scans, 0 angle, D16300 command]
[Ingest 02:18:32 INFO] Sending XML status message
[Status 02:18:32 INFO] Mirror angle: 0
[Mirror 02:18:32 INFO] rotating to position U
[Status 02:18:32 INFO] .SET file for ACQ96 ready
[Ingest 02:18:32 INFO] Starting acquisition
[Status 02:18:32 INFO] reading housekeeping
[Status 02:18:51 INFO] acquire complete
[Status 02:18:51 INFO] writing housekeeping
[Sequencer 02:18:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:18:51 INFO] incremented U scene to 43 completed views
[Sequencer 02:18:51 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:18:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:18:51 INFO] incremented to [AERI set: name V43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:18:51 INFO] U43.SIG(18)
[sigmove 02:18:51 DEBUG] transformed U43Ma.SPC -> U43MA.SPC
[sigmove 02:18:51 DEBUG] transformed U43Mb.SPC -> U43MB.SPC
[sigmove 02:18:51 DEBUG] transformed U43Mc.SPC -> U43MC.SPC
[sigmove 02:18:51 DEBUG] transformed U43Md.SPC -> U43MD.SPC
[sigmove 02:18:51 DEBUG] transformed U43Me.SPC -> U43ME.SPC
[sigmove 02:18:51 DEBUG] transformed U43Mf.SPC -> U43MF.SPC
[Status 02:18:51 INFO] data for U43 transferred to science data processing
[Tidy 02:18:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:18:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:18:51 INFO] resetting WatchDogTimer
[Status 02:18:51 INFO] Starting Set [AERI set: name V43, 6 scans, 0 angle, D16300 command]
[Ingest 02:18:51 INFO] Sending XML status message
[Status 02:18:51 INFO] Mirror angle: 0
[Mirror 02:18:51 INFO] rotating to position V
[Status 02:18:51 INFO] .SET file for ACQ96 ready
[Ingest 02:18:51 INFO] Starting acquisition
[Status 02:18:52 INFO] reading housekeeping
[Status 02:19:10 INFO] acquire complete
[Status 02:19:10 INFO] writing housekeeping
[Sequencer 02:19:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:19:10 INFO] incremented V scene to 43 completed views
[Sequencer 02:19:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:19:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:19:10 INFO] incremented to [AERI set: name W43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:19:10 INFO] V43.SIG(18)
[sigmove 02:19:10 DEBUG] transformed V43Ma.SPC -> V43MA.SPC
[sigmove 02:19:10 DEBUG] transformed V43Mb.SPC -> V43MB.SPC
[sigmove 02:19:10 DEBUG] transformed V43Mc.SPC -> V43MC.SPC
[sigmove 02:19:10 DEBUG] transformed V43Md.SPC -> V43MD.SPC
[sigmove 02:19:10 DEBUG] transformed V43Me.SPC -> V43ME.SPC
[sigmove 02:19:10 DEBUG] transformed V43Mf.SPC -> V43MF.SPC
[Status 02:19:10 INFO] data for V43 transferred to science data processing
[Tidy 02:19:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:19:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:19:10 INFO] resetting WatchDogTimer
[Status 02:19:10 INFO] Starting Set [AERI set: name W43, 6 scans, 0 angle, D16300 command]
[Ingest 02:19:10 INFO] Sending XML status message
[Status 02:19:10 INFO] Mirror angle: 0
[Mirror 02:19:10 INFO] rotating to position W
[Status 02:19:10 INFO] .SET file for ACQ96 ready
[Ingest 02:19:10 INFO] Starting acquisition
[Status 02:19:11 INFO] reading housekeeping
[Status 02:19:29 INFO] acquire complete
[Status 02:19:29 INFO] writing housekeeping
[Sequencer 02:19:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:19:29 INFO] incremented W scene to 43 completed views
[Sequencer 02:19:29 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:19:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:19:29 INFO] incremented to [AERI set: name X43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:19:29 INFO] W43.SIG(18)
[sigmove 02:19:29 DEBUG] transformed W43Ma.SPC -> W43MA.SPC
[sigmove 02:19:29 DEBUG] transformed W43Mb.SPC -> W43MB.SPC
[sigmove 02:19:29 DEBUG] transformed W43Mc.SPC -> W43MC.SPC
[sigmove 02:19:29 DEBUG] transformed W43Md.SPC -> W43MD.SPC
[sigmove 02:19:29 DEBUG] transformed W43Me.SPC -> W43ME.SPC
[sigmove 02:19:29 DEBUG] transformed W43Mf.SPC -> W43MF.SPC
[Status 02:19:29 INFO] data for W43 transferred to science data processing
[Tidy 02:19:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:19:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:19:29 INFO] resetting WatchDogTimer
[Status 02:19:29 INFO] Starting Set [AERI set: name X43, 6 scans, 0 angle, D16300 command]
[Ingest 02:19:29 INFO] Sending XML status message
[Status 02:19:29 INFO] Mirror angle: 0
[Mirror 02:19:29 INFO] rotating to position X
[Status 02:19:29 INFO] .SET file for ACQ96 ready
[Ingest 02:19:30 INFO] Starting acquisition
[Status 02:19:30 INFO] reading housekeeping
[Status 02:19:48 INFO] acquire complete
[Status 02:19:48 INFO] writing housekeeping
[Sequencer 02:19:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:19:48 INFO] incremented X scene to 43 completed views
[Sequencer 02:19:48 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:19:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:19:48 INFO] incremented to [AERI set: name Y43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:19:48 INFO] X43.SIG(18)
[sigmove 02:19:48 DEBUG] transformed X43Ma.SPC -> X43MA.SPC
[sigmove 02:19:48 DEBUG] transformed X43Mb.SPC -> X43MB.SPC
[sigmove 02:19:48 DEBUG] transformed X43Mc.SPC -> X43MC.SPC
[sigmove 02:19:48 DEBUG] transformed X43Md.SPC -> X43MD.SPC
[sigmove 02:19:48 DEBUG] transformed X43Me.SPC -> X43ME.SPC
[sigmove 02:19:48 DEBUG] transformed X43Mf.SPC -> X43MF.SPC
[Status 02:19:48 INFO] data for X43 transferred to science data processing
[Tidy 02:19:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:19:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:19:48 INFO] resetting WatchDogTimer
[Status 02:19:48 INFO] Starting Set [AERI set: name Y43, 6 scans, 0 angle, D16300 command]
[Ingest 02:19:48 INFO] Sending XML status message
[Status 02:19:48 INFO] Mirror angle: 0
[Mirror 02:19:48 INFO] rotating to position Y
[Status 02:19:49 INFO] .SET file for ACQ96 ready
[Ingest 02:19:49 INFO] Starting acquisition
[Status 02:19:49 INFO] reading housekeeping
[Status 02:20:07 INFO] acquire complete
[Status 02:20:07 INFO] writing housekeeping
[Sequencer 02:20:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:20:07 INFO] incremented Y scene to 43 completed views
[Sequencer 02:20:07 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:20:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:20:07 INFO] incremented to [AERI set: name Z43, 6 scans, 0 angle, D16300 command] set
[sigmove 02:20:07 INFO] Y43.SIG(18)
[sigmove 02:20:07 DEBUG] transformed Y43Ma.SPC -> Y43MA.SPC
[sigmove 02:20:07 DEBUG] transformed Y43Mb.SPC -> Y43MB.SPC
[sigmove 02:20:07 DEBUG] transformed Y43Mc.SPC -> Y43MC.SPC
[sigmove 02:20:07 DEBUG] transformed Y43Md.SPC -> Y43MD.SPC
[sigmove 02:20:07 DEBUG] transformed Y43Me.SPC -> Y43ME.SPC
[sigmove 02:20:07 DEBUG] transformed Y43Mf.SPC -> Y43MF.SPC
[Status 02:20:07 INFO] data for Y43 transferred to science data processing
[Tidy 02:20:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:20:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:20:07 INFO] resetting WatchDogTimer
[Status 02:20:07 INFO] Starting Set [AERI set: name Z43, 6 scans, 0 angle, D16300 command]
[Ingest 02:20:07 INFO] Sending XML status message
[Status 02:20:07 INFO] Mirror angle: 0
[Mirror 02:20:07 INFO] rotating to position Z
[Status 02:20:08 INFO] .SET file for ACQ96 ready
[Ingest 02:20:08 INFO] Starting acquisition
[Status 02:20:08 INFO] reading housekeeping
[Status 02:20:26 INFO] acquire complete
[Status 02:20:26 INFO] writing housekeeping
[Sequencer 02:20:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:20:26 INFO] incremented Z scene to 43 completed views
[Sequencer 02:20:26 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:20:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:20:26 INFO] incremented to [AERI set: name A44, 6 scans, 120 angle, D28300 command] set
[sigmove 02:20:26 INFO] Z43.SIG(18)
[sigmove 02:20:26 DEBUG] transformed Z43Ma.SPC -> Z43MA.SPC
[sigmove 02:20:26 DEBUG] transformed Z43Mb.SPC -> Z43MB.SPC
[sigmove 02:20:26 DEBUG] transformed Z43Mc.SPC -> Z43MC.SPC
[sigmove 02:20:26 DEBUG] transformed Z43Md.SPC -> Z43MD.SPC
[sigmove 02:20:26 DEBUG] transformed Z43Me.SPC -> Z43ME.SPC
[sigmove 02:20:26 DEBUG] transformed Z43Mf.SPC -> Z43MF.SPC
[Status 02:20:26 INFO] data for Z43 transferred to science data processing
[Tidy 02:20:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:20:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:20:26 INFO] resetting WatchDogTimer
[Status 02:20:26 INFO] Starting Set [AERI set: name A44, 6 scans, 120 angle, D28300 command]
[Ingest 02:20:26 INFO] Sending XML status message
[Status 02:20:26 INFO] Mirror angle: 120
[Mirror 02:20:27 INFO] rotating to position A
[Status 02:20:28 INFO] .SET file for ACQ96 ready
[Ingest 02:20:28 INFO] Starting acquisition
[Status 02:20:28 INFO] reading housekeeping
[Status 02:20:46 INFO] acquire complete
[Status 02:20:47 INFO] writing housekeeping
[Sequencer 02:20:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:20:47 INFO] incremented A scene to 44 completed views
[Sequencer 02:20:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:20:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:20:47 INFO] incremented to [AERI set: name H44, 6 scans, 60 angle, D22500 command] set
[sigmove 02:20:47 INFO] A44.SIG(18)
[sigmove 02:20:47 DEBUG] transformed A44Ma.SPC -> A44MA.SPC
[sigmove 02:20:47 DEBUG] transformed A44Mb.SPC -> A44MB.SPC
[sigmove 02:20:47 DEBUG] transformed A44Mc.SPC -> A44MC.SPC
[sigmove 02:20:47 DEBUG] transformed A44Md.SPC -> A44MD.SPC
[sigmove 02:20:47 DEBUG] transformed A44Me.SPC -> A44ME.SPC
[sigmove 02:20:47 DEBUG] transformed A44Mf.SPC -> A44MF.SPC
[Status 02:20:47 INFO] data for A44 transferred to science data processing
[Tidy 02:20:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:20:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:20:47 INFO] resetting WatchDogTimer
[Status 02:20:47 INFO] Starting Set [AERI set: name H44, 6 scans, 60 angle, D22500 command]
[Ingest 02:20:47 INFO] Sending XML status message
[Status 02:20:47 INFO] Mirror angle: 60
[Mirror 02:20:47 INFO] rotating to position H
[Status 02:20:47 INFO] .SET file for ACQ96 ready
[Ingest 02:20:48 INFO] Starting acquisition
[Status 02:20:48 INFO] reading housekeeping
[Status 02:21:05 INFO] acquire complete
[Status 02:21:06 INFO] writing housekeeping
[Sequencer 02:21:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:21:06 INFO] incremented H scene to 44 completed views
[Sequencer 02:21:06 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:21:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:21:06 INFO] incremented to [AERI set: name S44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:21:06 INFO] H44.SIG(18)
[sigmove 02:21:06 DEBUG] transformed H44Ma.SPC -> H44MA.SPC
[sigmove 02:21:06 DEBUG] transformed H44Mb.SPC -> H44MB.SPC
[sigmove 02:21:06 DEBUG] transformed H44Mc.SPC -> H44MC.SPC
[sigmove 02:21:06 DEBUG] transformed H44Md.SPC -> H44MD.SPC
[sigmove 02:21:06 DEBUG] transformed H44Me.SPC -> H44ME.SPC
[sigmove 02:21:06 DEBUG] transformed H44Mf.SPC -> H44MF.SPC
[Status 02:21:06 INFO] data for H44 transferred to science data processing
[Tidy 02:21:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:21:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:21:06 INFO] resetting WatchDogTimer
[Status 02:21:06 INFO] Starting Set [AERI set: name S44, 6 scans, 0 angle, D16300 command]
[Ingest 02:21:06 INFO] Sending XML status message
[Status 02:21:06 INFO] Mirror angle: 0
[Mirror 02:21:06 INFO] rotating to position S
[Status 02:21:07 INFO] .SET file for ACQ96 ready
[Ingest 02:21:07 INFO] Starting acquisition
[Status 02:21:07 INFO] reading housekeeping
[Status 02:21:24 INFO] acquire complete
[Status 02:21:25 INFO] writing housekeeping
[Sequencer 02:21:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:21:25 INFO] incremented S scene to 44 completed views
[Sequencer 02:21:25 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:21:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:21:25 INFO] incremented to [AERI set: name T44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:21:25 INFO] S44.SIG(18)
[sigmove 02:21:25 DEBUG] transformed S44Ma.SPC -> S44MA.SPC
[sigmove 02:21:25 DEBUG] transformed S44Mb.SPC -> S44MB.SPC
[sigmove 02:21:25 DEBUG] transformed S44Mc.SPC -> S44MC.SPC
[sigmove 02:21:25 DEBUG] transformed S44Md.SPC -> S44MD.SPC
[sigmove 02:21:25 DEBUG] transformed S44Me.SPC -> S44ME.SPC
[sigmove 02:21:25 DEBUG] transformed S44Mf.SPC -> S44MF.SPC
[Status 02:21:25 INFO] data for S44 transferred to science data processing
[Tidy 02:21:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:21:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:21:25 INFO] resetting WatchDogTimer
[Status 02:21:25 INFO] Starting Set [AERI set: name T44, 6 scans, 0 angle, D16300 command]
[Ingest 02:21:25 INFO] Sending XML status message
[Status 02:21:25 INFO] Mirror angle: 0
[Mirror 02:21:25 INFO] rotating to position T
[Status 02:21:25 INFO] .SET file for ACQ96 ready
[Ingest 02:21:25 INFO] Starting acquisition
[Status 02:21:25 INFO] reading housekeeping
[Status 02:21:43 INFO] acquire complete
[Status 02:21:44 INFO] writing housekeeping
[Sequencer 02:21:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:21:44 INFO] incremented T scene to 44 completed views
[Sequencer 02:21:44 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:21:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:21:44 INFO] incremented to [AERI set: name U44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:21:44 INFO] T44.SIG(18)
[sigmove 02:21:44 DEBUG] transformed T44Ma.SPC -> T44MA.SPC
[sigmove 02:21:44 DEBUG] transformed T44Mb.SPC -> T44MB.SPC
[sigmove 02:21:44 DEBUG] transformed T44Mc.SPC -> T44MC.SPC
[sigmove 02:21:44 DEBUG] transformed T44Md.SPC -> T44MD.SPC
[sigmove 02:21:44 DEBUG] transformed T44Me.SPC -> T44ME.SPC
[sigmove 02:21:44 DEBUG] transformed T44Mf.SPC -> T44MF.SPC
[Status 02:21:44 INFO] data for T44 transferred to science data processing
[Tidy 02:21:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:21:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:21:44 INFO] resetting WatchDogTimer
[Status 02:21:44 INFO] Starting Set [AERI set: name U44, 6 scans, 0 angle, D16300 command]
[Ingest 02:21:44 INFO] Sending XML status message
[Status 02:21:44 INFO] Mirror angle: 0
[Mirror 02:21:44 INFO] rotating to position U
[Status 02:21:44 INFO] .SET file for ACQ96 ready
[Ingest 02:21:44 INFO] Starting acquisition
[Status 02:21:44 INFO] reading housekeeping
[Status 02:22:02 INFO] acquire complete
[Status 02:22:03 INFO] writing housekeeping
[Sequencer 02:22:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:22:03 INFO] incremented U scene to 44 completed views
[Sequencer 02:22:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:22:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:22:03 INFO] incremented to [AERI set: name V44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:22:03 INFO] U44.SIG(18)
[sigmove 02:22:03 DEBUG] transformed U44Ma.SPC -> U44MA.SPC
[sigmove 02:22:03 DEBUG] transformed U44Mb.SPC -> U44MB.SPC
[sigmove 02:22:03 DEBUG] transformed U44Mc.SPC -> U44MC.SPC
[sigmove 02:22:03 DEBUG] transformed U44Md.SPC -> U44MD.SPC
[sigmove 02:22:03 DEBUG] transformed U44Me.SPC -> U44ME.SPC
[sigmove 02:22:03 DEBUG] transformed U44Mf.SPC -> U44MF.SPC
[Status 02:22:03 INFO] data for U44 transferred to science data processing
[Tidy 02:22:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:22:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:22:03 INFO] resetting WatchDogTimer
[Status 02:22:03 INFO] Starting Set [AERI set: name V44, 6 scans, 0 angle, D16300 command]
[Ingest 02:22:03 INFO] Sending XML status message
[Status 02:22:03 INFO] Mirror angle: 0
[Mirror 02:22:03 INFO] rotating to position V
[Status 02:22:03 INFO] .SET file for ACQ96 ready
[Ingest 02:22:03 INFO] Starting acquisition
[Status 02:22:03 INFO] reading housekeeping
[Status 02:22:22 INFO] acquire complete
[Status 02:22:22 INFO] writing housekeeping
[Sequencer 02:22:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:22:22 INFO] incremented V scene to 44 completed views
[Sequencer 02:22:22 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:22:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:22:22 INFO] incremented to [AERI set: name W44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:22:22 INFO] V44.SIG(18)
[sigmove 02:22:22 DEBUG] transformed V44Ma.SPC -> V44MA.SPC
[sigmove 02:22:22 DEBUG] transformed V44Mb.SPC -> V44MB.SPC
[sigmove 02:22:22 DEBUG] transformed V44Mc.SPC -> V44MC.SPC
[sigmove 02:22:22 DEBUG] transformed V44Md.SPC -> V44MD.SPC
[sigmove 02:22:22 DEBUG] transformed V44Me.SPC -> V44ME.SPC
[sigmove 02:22:22 DEBUG] transformed V44Mf.SPC -> V44MF.SPC
[Status 02:22:22 INFO] data for V44 transferred to science data processing
[Tidy 02:22:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:22:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:22:22 INFO] resetting WatchDogTimer
[Status 02:22:22 INFO] Starting Set [AERI set: name W44, 6 scans, 0 angle, D16300 command]
[Ingest 02:22:22 INFO] Sending XML status message
[Status 02:22:22 INFO] Mirror angle: 0
[Mirror 02:22:22 INFO] rotating to position W
[Status 02:22:22 INFO] .SET file for ACQ96 ready
[Ingest 02:22:22 INFO] Starting acquisition
[Status 02:22:23 INFO] reading housekeeping
[Status 02:22:41 INFO] acquire complete
[Status 02:22:41 INFO] writing housekeeping
[Sequencer 02:22:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:22:41 INFO] incremented W scene to 44 completed views
[Sequencer 02:22:41 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:22:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:22:41 INFO] incremented to [AERI set: name X44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:22:41 INFO] W44.SIG(18)
[sigmove 02:22:41 DEBUG] transformed W44Ma.SPC -> W44MA.SPC
[sigmove 02:22:41 DEBUG] transformed W44Mb.SPC -> W44MB.SPC
[sigmove 02:22:41 DEBUG] transformed W44Mc.SPC -> W44MC.SPC
[sigmove 02:22:41 DEBUG] transformed W44Md.SPC -> W44MD.SPC
[sigmove 02:22:41 DEBUG] transformed W44Me.SPC -> W44ME.SPC
[sigmove 02:22:41 DEBUG] transformed W44Mf.SPC -> W44MF.SPC
[Status 02:22:41 INFO] data for W44 transferred to science data processing
[Tidy 02:22:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:22:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:22:41 INFO] resetting WatchDogTimer
[Status 02:22:41 INFO] Starting Set [AERI set: name X44, 6 scans, 0 angle, D16300 command]
[Ingest 02:22:41 INFO] Sending XML status message
[Status 02:22:41 INFO] Mirror angle: 0
[Mirror 02:22:41 INFO] rotating to position X
[Status 02:22:41 INFO] .SET file for ACQ96 ready
[Ingest 02:22:42 INFO] Starting acquisition
[Status 02:22:42 INFO] reading housekeeping
[Status 02:23:00 INFO] acquire complete
[Status 02:23:00 INFO] writing housekeeping
[Sequencer 02:23:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:23:00 INFO] incremented X scene to 44 completed views
[Sequencer 02:23:00 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:23:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:23:00 INFO] incremented to [AERI set: name Y44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:23:00 INFO] X44.SIG(18)
[sigmove 02:23:00 DEBUG] transformed X44Ma.SPC -> X44MA.SPC
[sigmove 02:23:00 DEBUG] transformed X44Mb.SPC -> X44MB.SPC
[sigmove 02:23:00 DEBUG] transformed X44Mc.SPC -> X44MC.SPC
[sigmove 02:23:00 DEBUG] transformed X44Md.SPC -> X44MD.SPC
[sigmove 02:23:00 DEBUG] transformed X44Me.SPC -> X44ME.SPC
[sigmove 02:23:00 DEBUG] transformed X44Mf.SPC -> X44MF.SPC
[Status 02:23:00 INFO] data for X44 transferred to science data processing
[Tidy 02:23:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:23:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:23:00 INFO] resetting WatchDogTimer
[Status 02:23:00 INFO] Starting Set [AERI set: name Y44, 6 scans, 0 angle, D16300 command]
[Ingest 02:23:00 INFO] Sending XML status message
[Status 02:23:00 INFO] Mirror angle: 0
[Mirror 02:23:00 INFO] rotating to position Y
[Status 02:23:01 INFO] .SET file for ACQ96 ready
[Ingest 02:23:01 INFO] Starting acquisition
[Status 02:23:01 INFO] reading housekeeping
[Status 02:23:19 INFO] acquire complete
[Status 02:23:19 INFO] writing housekeeping
[Sequencer 02:23:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:23:19 INFO] incremented Y scene to 44 completed views
[Sequencer 02:23:19 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:23:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:23:19 INFO] incremented to [AERI set: name Z44, 6 scans, 0 angle, D16300 command] set
[sigmove 02:23:19 INFO] Y44.SIG(18)
[sigmove 02:23:19 DEBUG] transformed Y44Ma.SPC -> Y44MA.SPC
[sigmove 02:23:19 DEBUG] transformed Y44Mb.SPC -> Y44MB.SPC
[sigmove 02:23:19 DEBUG] transformed Y44Mc.SPC -> Y44MC.SPC
[sigmove 02:23:19 DEBUG] transformed Y44Md.SPC -> Y44MD.SPC
[sigmove 02:23:19 DEBUG] transformed Y44Me.SPC -> Y44ME.SPC
[sigmove 02:23:19 DEBUG] transformed Y44Mf.SPC -> Y44MF.SPC
[Status 02:23:19 INFO] data for Y44 transferred to science data processing
[Tidy 02:23:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:23:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:23:19 INFO] resetting WatchDogTimer
[Status 02:23:19 INFO] Starting Set [AERI set: name Z44, 6 scans, 0 angle, D16300 command]
[Ingest 02:23:19 INFO] Sending XML status message
[Status 02:23:19 INFO] Mirror angle: 0
[Mirror 02:23:19 INFO] rotating to position Z
[Status 02:23:20 INFO] .SET file for ACQ96 ready
[Ingest 02:23:20 INFO] Starting acquisition
[Status 02:23:20 INFO] reading housekeeping
[Status 02:23:38 INFO] acquire complete
[Status 02:23:38 INFO] writing housekeeping
[Sequencer 02:23:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:23:38 INFO] incremented Z scene to 44 completed views
[Sequencer 02:23:38 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:23:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:23:38 INFO] incremented to [AERI set: name H45, 6 scans, 60 angle, D22500 command] set
[sigmove 02:23:38 INFO] Z44.SIG(18)
[sigmove 02:23:38 DEBUG] transformed Z44Ma.SPC -> Z44MA.SPC
[sigmove 02:23:38 DEBUG] transformed Z44Mb.SPC -> Z44MB.SPC
[sigmove 02:23:38 DEBUG] transformed Z44Mc.SPC -> Z44MC.SPC
[sigmove 02:23:38 DEBUG] transformed Z44Md.SPC -> Z44MD.SPC
[sigmove 02:23:38 DEBUG] transformed Z44Me.SPC -> Z44ME.SPC
[sigmove 02:23:38 DEBUG] transformed Z44Mf.SPC -> Z44MF.SPC
[Status 02:23:38 INFO] data for Z44 transferred to science data processing
[Tidy 02:23:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:23:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:23:38 INFO] resetting WatchDogTimer
[Status 02:23:38 INFO] Starting Set [AERI set: name H45, 6 scans, 60 angle, D22500 command]
[Ingest 02:23:38 INFO] Sending XML status message
[Status 02:23:38 INFO] Mirror angle: 60
[Mirror 02:23:39 INFO] rotating to position H
[Status 02:23:39 INFO] .SET file for ACQ96 ready
[Ingest 02:23:39 INFO] Starting acquisition
[Status 02:23:40 INFO] reading housekeeping
[Status 02:23:57 INFO] acquire complete
[Status 02:23:57 INFO] writing housekeeping
[Sequencer 02:23:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:23:57 INFO] incremented H scene to 45 completed views
[Sequencer 02:23:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:23:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:23:57 INFO] incremented to [AERI set: name A45, 6 scans, 120 angle, D28300 command] set
[sigmove 02:23:57 INFO] H45.SIG(18)
[sigmove 02:23:57 DEBUG] transformed H45Ma.SPC -> H45MA.SPC
[sigmove 02:23:57 DEBUG] transformed H45Mb.SPC -> H45MB.SPC
[sigmove 02:23:57 DEBUG] transformed H45Mc.SPC -> H45MC.SPC
[sigmove 02:23:57 DEBUG] transformed H45Md.SPC -> H45MD.SPC
[sigmove 02:23:57 DEBUG] transformed H45Me.SPC -> H45ME.SPC
[sigmove 02:23:57 DEBUG] transformed H45Mf.SPC -> H45MF.SPC
[Status 02:23:57 INFO] data for H45 transferred to science data processing
[Tidy 02:23:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:23:57 INFO] A43.FIN(19),H43.FIN(19),S43.FIN(19),T43.FIN(19),U43.FIN(19),V43.FIN(19),W43.FIN(19),X43.FIN(19),Y43.FIN(19),Z43.FIN(19),A44.FIN(19),H44.FIN(19),S44.FIN(19),T44.FIN(19),U44.FIN(19),V44.FIN(19),W44.FIN(19),X44.FIN(19),Y44.FIN(19),Z44.FIN(19)
[sigmove 02:23:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:23:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:23:59 DEBUG] done zipping
[WatchDog 02:23:59 INFO] resetting WatchDogTimer
[Status 02:23:59 INFO] Starting Set [AERI set: name A45, 6 scans, 120 angle, D28300 command]
[Ingest 02:23:59 INFO] Sending XML status message
[Status 02:23:59 INFO] Mirror angle: 120
[Mirror 02:23:59 INFO] rotating to position A
[Status 02:24:00 INFO] .SET file for ACQ96 ready
[Ingest 02:24:00 INFO] Starting acquisition
[Status 02:24:00 INFO] reading housekeeping
[Status 02:24:17 INFO] acquire complete
[Status 02:24:18 INFO] writing housekeeping
[Sequencer 02:24:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:24:18 INFO] incremented A scene to 45 completed views
[Sequencer 02:24:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:24:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:24:18 INFO] incremented to [AERI set: name S45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:24:18 INFO] A45.SIG(18)
[sigmove 02:24:18 DEBUG] transformed A45Ma.SPC -> A45MA.SPC
[sigmove 02:24:18 DEBUG] transformed A45Mb.SPC -> A45MB.SPC
[sigmove 02:24:18 DEBUG] transformed A45Mc.SPC -> A45MC.SPC
[sigmove 02:24:18 DEBUG] transformed A45Md.SPC -> A45MD.SPC
[sigmove 02:24:18 DEBUG] transformed A45Me.SPC -> A45ME.SPC
[sigmove 02:24:18 DEBUG] transformed A45Mf.SPC -> A45MF.SPC
[Status 02:24:18 INFO] data for A45 transferred to science data processing
[Tidy 02:24:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:24:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:24:18 INFO] resetting WatchDogTimer
[Status 02:24:18 INFO] Starting Set [AERI set: name S45, 6 scans, 0 angle, D16300 command]
[Ingest 02:24:18 INFO] Sending XML status message
[Status 02:24:18 INFO] Mirror angle: 0
[Mirror 02:24:18 INFO] rotating to position S
[Status 02:24:19 INFO] .SET file for ACQ96 ready
[Ingest 02:24:19 INFO] Starting acquisition
[Status 02:24:19 INFO] reading housekeeping
[Status 02:24:37 INFO] acquire complete
[Status 02:24:38 INFO] writing housekeeping
[Sequencer 02:24:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:24:38 INFO] incremented S scene to 45 completed views
[Sequencer 02:24:38 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:24:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:24:38 INFO] incremented to [AERI set: name T45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:24:38 INFO] S45.SIG(18)
[sigmove 02:24:38 DEBUG] transformed S45Ma.SPC -> S45MA.SPC
[sigmove 02:24:38 DEBUG] transformed S45Mb.SPC -> S45MB.SPC
[sigmove 02:24:38 DEBUG] transformed S45Mc.SPC -> S45MC.SPC
[sigmove 02:24:38 DEBUG] transformed S45Md.SPC -> S45MD.SPC
[sigmove 02:24:38 DEBUG] transformed S45Me.SPC -> S45ME.SPC
[sigmove 02:24:38 DEBUG] transformed S45Mf.SPC -> S45MF.SPC
[Status 02:24:38 INFO] data for S45 transferred to science data processing
[Tidy 02:24:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:24:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:24:38 INFO] resetting WatchDogTimer
[Status 02:24:38 INFO] Starting Set [AERI set: name T45, 6 scans, 0 angle, D16300 command]
[Ingest 02:24:38 INFO] Sending XML status message
[Status 02:24:38 INFO] Mirror angle: 0
[Mirror 02:24:38 INFO] rotating to position T
[Status 02:24:38 INFO] .SET file for ACQ96 ready
[Ingest 02:24:38 INFO] Starting acquisition
[Status 02:24:38 INFO] reading housekeeping
[Status 02:24:57 INFO] acquire complete
[Status 02:24:57 INFO] writing housekeeping
[Sequencer 02:24:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:24:57 INFO] incremented T scene to 45 completed views
[Sequencer 02:24:57 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:24:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:24:57 INFO] incremented to [AERI set: name U45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:24:57 INFO] T45.SIG(18)
[sigmove 02:24:57 DEBUG] transformed T45Ma.SPC -> T45MA.SPC
[sigmove 02:24:57 DEBUG] transformed T45Mb.SPC -> T45MB.SPC
[sigmove 02:24:57 DEBUG] transformed T45Mc.SPC -> T45MC.SPC
[sigmove 02:24:57 DEBUG] transformed T45Md.SPC -> T45MD.SPC
[sigmove 02:24:57 DEBUG] transformed T45Me.SPC -> T45ME.SPC
[sigmove 02:24:57 DEBUG] transformed T45Mf.SPC -> T45MF.SPC
[Status 02:24:57 INFO] data for T45 transferred to science data processing
[Tidy 02:24:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:24:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:24:57 INFO] resetting WatchDogTimer
[Status 02:24:57 INFO] Starting Set [AERI set: name U45, 6 scans, 0 angle, D16300 command]
[Ingest 02:24:57 INFO] Sending XML status message
[Status 02:24:57 INFO] Mirror angle: 0
[Mirror 02:24:57 INFO] rotating to position U
[Status 02:24:58 INFO] .SET file for ACQ96 ready
[Ingest 02:24:58 INFO] Starting acquisition
[Status 02:24:58 INFO] reading housekeeping
[Status 02:25:16 INFO] acquire complete
[Status 02:25:16 INFO] writing housekeeping
[Sequencer 02:25:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:25:16 INFO] incremented U scene to 45 completed views
[Sequencer 02:25:16 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:25:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:25:16 INFO] incremented to [AERI set: name V45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:25:16 INFO] U45.SIG(18)
[sigmove 02:25:16 DEBUG] transformed U45Ma.SPC -> U45MA.SPC
[sigmove 02:25:16 DEBUG] transformed U45Mb.SPC -> U45MB.SPC
[sigmove 02:25:16 DEBUG] transformed U45Mc.SPC -> U45MC.SPC
[sigmove 02:25:16 DEBUG] transformed U45Md.SPC -> U45MD.SPC
[sigmove 02:25:16 DEBUG] transformed U45Me.SPC -> U45ME.SPC
[sigmove 02:25:16 DEBUG] transformed U45Mf.SPC -> U45MF.SPC
[Status 02:25:16 INFO] data for U45 transferred to science data processing
[Tidy 02:25:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:25:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:25:16 INFO] resetting WatchDogTimer
[Status 02:25:16 INFO] Starting Set [AERI set: name V45, 6 scans, 0 angle, D16300 command]
[Ingest 02:25:16 INFO] Sending XML status message
[Status 02:25:16 INFO] Mirror angle: 0
[Mirror 02:25:16 INFO] rotating to position V
[Status 02:25:16 INFO] .SET file for ACQ96 ready
[Ingest 02:25:16 INFO] Starting acquisition
[Status 02:25:17 INFO] reading housekeeping
[Status 02:25:35 INFO] acquire complete
[Status 02:25:35 INFO] writing housekeeping
[Sequencer 02:25:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:25:35 INFO] incremented V scene to 45 completed views
[Sequencer 02:25:35 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:25:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:25:35 INFO] incremented to [AERI set: name W45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:25:35 INFO] V45.SIG(18)
[sigmove 02:25:35 DEBUG] transformed V45Ma.SPC -> V45MA.SPC
[sigmove 02:25:35 DEBUG] transformed V45Mb.SPC -> V45MB.SPC
[sigmove 02:25:35 DEBUG] transformed V45Mc.SPC -> V45MC.SPC
[sigmove 02:25:35 DEBUG] transformed V45Md.SPC -> V45MD.SPC
[sigmove 02:25:35 DEBUG] transformed V45Me.SPC -> V45ME.SPC
[sigmove 02:25:35 DEBUG] transformed V45Mf.SPC -> V45MF.SPC
[Status 02:25:35 INFO] data for V45 transferred to science data processing
[Tidy 02:25:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:25:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:25:35 INFO] resetting WatchDogTimer
[Status 02:25:35 INFO] Starting Set [AERI set: name W45, 6 scans, 0 angle, D16300 command]
[Ingest 02:25:35 INFO] Sending XML status message
[Status 02:25:35 INFO] Mirror angle: 0
[Mirror 02:25:35 INFO] rotating to position W
[Status 02:25:36 INFO] .SET file for ACQ96 ready
[Ingest 02:25:36 INFO] Starting acquisition
[Status 02:25:36 INFO] reading housekeeping
[Status 02:25:54 INFO] acquire complete
[Status 02:25:54 INFO] writing housekeeping
[Sequencer 02:25:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:25:54 INFO] incremented W scene to 45 completed views
[Sequencer 02:25:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:25:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:25:54 INFO] incremented to [AERI set: name X45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:25:54 INFO] W45.SIG(18)
[sigmove 02:25:54 DEBUG] transformed W45Ma.SPC -> W45MA.SPC
[sigmove 02:25:54 DEBUG] transformed W45Mb.SPC -> W45MB.SPC
[sigmove 02:25:54 DEBUG] transformed W45Mc.SPC -> W45MC.SPC
[sigmove 02:25:54 DEBUG] transformed W45Md.SPC -> W45MD.SPC
[sigmove 02:25:54 DEBUG] transformed W45Me.SPC -> W45ME.SPC
[sigmove 02:25:54 DEBUG] transformed W45Mf.SPC -> W45MF.SPC
[Status 02:25:54 INFO] data for W45 transferred to science data processing
[Tidy 02:25:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:25:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:25:54 INFO] resetting WatchDogTimer
[Status 02:25:54 INFO] Starting Set [AERI set: name X45, 6 scans, 0 angle, D16300 command]
[Ingest 02:25:54 INFO] Sending XML status message
[Status 02:25:54 INFO] Mirror angle: 0
[Mirror 02:25:54 INFO] rotating to position X
[Status 02:25:55 INFO] .SET file for ACQ96 ready
[Ingest 02:25:55 INFO] Starting acquisition
[Status 02:25:55 INFO] reading housekeeping
[Status 02:26:13 INFO] acquire complete
[Status 02:26:13 INFO] writing housekeeping
[Sequencer 02:26:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:26:13 INFO] incremented X scene to 45 completed views
[Sequencer 02:26:13 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:26:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:26:13 INFO] incremented to [AERI set: name Y45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:26:13 INFO] X45.SIG(18)
[sigmove 02:26:13 DEBUG] transformed X45Ma.SPC -> X45MA.SPC
[sigmove 02:26:13 DEBUG] transformed X45Mb.SPC -> X45MB.SPC
[sigmove 02:26:13 DEBUG] transformed X45Mc.SPC -> X45MC.SPC
[sigmove 02:26:13 DEBUG] transformed X45Md.SPC -> X45MD.SPC
[sigmove 02:26:13 DEBUG] transformed X45Me.SPC -> X45ME.SPC
[sigmove 02:26:13 DEBUG] transformed X45Mf.SPC -> X45MF.SPC
[Status 02:26:13 INFO] data for X45 transferred to science data processing
[Tidy 02:26:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:26:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:26:13 INFO] resetting WatchDogTimer
[Status 02:26:13 INFO] Starting Set [AERI set: name Y45, 6 scans, 0 angle, D16300 command]
[Ingest 02:26:13 INFO] Sending XML status message
[Status 02:26:13 INFO] Mirror angle: 0
[Mirror 02:26:13 INFO] rotating to position Y
[Status 02:26:14 INFO] .SET file for ACQ96 ready
[Ingest 02:26:14 INFO] Starting acquisition
[Status 02:26:14 INFO] reading housekeeping
[Status 02:26:32 INFO] acquire complete
[Status 02:26:32 INFO] writing housekeeping
[Sequencer 02:26:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:26:32 INFO] incremented Y scene to 45 completed views
[Sequencer 02:26:32 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:26:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:26:32 INFO] incremented to [AERI set: name Z45, 6 scans, 0 angle, D16300 command] set
[sigmove 02:26:32 INFO] Y45.SIG(18)
[sigmove 02:26:32 DEBUG] transformed Y45Ma.SPC -> Y45MA.SPC
[sigmove 02:26:32 DEBUG] transformed Y45Mb.SPC -> Y45MB.SPC
[sigmove 02:26:32 DEBUG] transformed Y45Mc.SPC -> Y45MC.SPC
[sigmove 02:26:32 DEBUG] transformed Y45Md.SPC -> Y45MD.SPC
[sigmove 02:26:32 DEBUG] transformed Y45Me.SPC -> Y45ME.SPC
[sigmove 02:26:32 DEBUG] transformed Y45Mf.SPC -> Y45MF.SPC
[Status 02:26:32 INFO] data for Y45 transferred to science data processing
[Tidy 02:26:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:26:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:26:32 INFO] resetting WatchDogTimer
[Status 02:26:32 INFO] Starting Set [AERI set: name Z45, 6 scans, 0 angle, D16300 command]
[Ingest 02:26:32 INFO] Sending XML status message
[Status 02:26:32 INFO] Mirror angle: 0
[Mirror 02:26:33 INFO] rotating to position Z
[Status 02:26:33 INFO] .SET file for ACQ96 ready
[Ingest 02:26:33 INFO] Starting acquisition
[Status 02:26:33 INFO] reading housekeeping
[Status 02:26:51 INFO] acquire complete
[Status 02:26:51 INFO] writing housekeeping
[Sequencer 02:26:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:26:51 INFO] incremented Z scene to 45 completed views
[Sequencer 02:26:51 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:26:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:26:51 INFO] incremented to [AERI set: name A46, 6 scans, 120 angle, D28300 command] set
[sigmove 02:26:51 INFO] Z45.SIG(18)
[sigmove 02:26:51 DEBUG] transformed Z45Ma.SPC -> Z45MA.SPC
[sigmove 02:26:51 DEBUG] transformed Z45Mb.SPC -> Z45MB.SPC
[sigmove 02:26:51 DEBUG] transformed Z45Mc.SPC -> Z45MC.SPC
[sigmove 02:26:51 DEBUG] transformed Z45Md.SPC -> Z45MD.SPC
[sigmove 02:26:51 DEBUG] transformed Z45Me.SPC -> Z45ME.SPC
[sigmove 02:26:51 DEBUG] transformed Z45Mf.SPC -> Z45MF.SPC
[Status 02:26:51 INFO] data for Z45 transferred to science data processing
[Tidy 02:26:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:26:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:26:51 INFO] resetting WatchDogTimer
[Status 02:26:52 INFO] Starting Set [AERI set: name A46, 6 scans, 120 angle, D28300 command]
[Ingest 02:26:52 INFO] Sending XML status message
[Status 02:26:52 INFO] Mirror angle: 120
[Mirror 02:26:52 INFO] rotating to position A
[Status 02:26:53 INFO] .SET file for ACQ96 ready
[Ingest 02:26:53 INFO] Starting acquisition
[Status 02:26:53 INFO] reading housekeeping
[Status 02:27:11 INFO] acquire complete
[Status 02:27:12 INFO] writing housekeeping
[Sequencer 02:27:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:27:12 INFO] incremented A scene to 46 completed views
[Sequencer 02:27:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:27:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:27:12 INFO] incremented to [AERI set: name H46, 6 scans, 60 angle, D22500 command] set
[sigmove 02:27:12 INFO] A46.SIG(18)
[sigmove 02:27:12 DEBUG] transformed A46Ma.SPC -> A46MA.SPC
[sigmove 02:27:12 DEBUG] transformed A46Mb.SPC -> A46MB.SPC
[sigmove 02:27:12 DEBUG] transformed A46Mc.SPC -> A46MC.SPC
[sigmove 02:27:12 DEBUG] transformed A46Md.SPC -> A46MD.SPC
[sigmove 02:27:12 DEBUG] transformed A46Me.SPC -> A46ME.SPC
[sigmove 02:27:12 DEBUG] transformed A46Mf.SPC -> A46MF.SPC
[Status 02:27:12 INFO] data for A46 transferred to science data processing
[Tidy 02:27:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:27:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:27:12 INFO] resetting WatchDogTimer
[Status 02:27:12 INFO] Starting Set [AERI set: name H46, 6 scans, 60 angle, D22500 command]
[Ingest 02:27:12 INFO] Sending XML status message
[Status 02:27:12 INFO] Mirror angle: 60
[Mirror 02:27:12 INFO] rotating to position H
[Status 02:27:13 INFO] .SET file for ACQ96 ready
[Ingest 02:27:13 INFO] Starting acquisition
[Status 02:27:13 INFO] reading housekeeping
[Status 02:27:30 INFO] acquire complete
[Status 02:27:31 INFO] writing housekeeping
[Sequencer 02:27:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:27:31 INFO] incremented H scene to 46 completed views
[Sequencer 02:27:31 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:27:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:27:31 INFO] incremented to [AERI set: name S46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:27:31 INFO] H46.SIG(18)
[sigmove 02:27:31 DEBUG] transformed H46Ma.SPC -> H46MA.SPC
[sigmove 02:27:31 DEBUG] transformed H46Mb.SPC -> H46MB.SPC
[sigmove 02:27:31 DEBUG] transformed H46Mc.SPC -> H46MC.SPC
[sigmove 02:27:31 DEBUG] transformed H46Md.SPC -> H46MD.SPC
[sigmove 02:27:31 DEBUG] transformed H46Me.SPC -> H46ME.SPC
[sigmove 02:27:31 DEBUG] transformed H46Mf.SPC -> H46MF.SPC
[Status 02:27:31 INFO] data for H46 transferred to science data processing
[Tidy 02:27:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:27:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:27:31 INFO] resetting WatchDogTimer
[Status 02:27:31 INFO] Starting Set [AERI set: name S46, 6 scans, 0 angle, D16300 command]
[Ingest 02:27:31 INFO] Sending XML status message
[Status 02:27:31 INFO] Mirror angle: 0
[Mirror 02:27:31 INFO] rotating to position S
[Status 02:27:32 INFO] .SET file for ACQ96 ready
[Ingest 02:27:32 INFO] Starting acquisition
[Status 02:27:32 INFO] reading housekeeping
[Status 02:27:49 INFO] acquire complete
[Status 02:27:50 INFO] writing housekeeping
[Sequencer 02:27:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:27:50 INFO] incremented S scene to 46 completed views
[Sequencer 02:27:50 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:27:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:27:50 INFO] incremented to [AERI set: name T46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:27:50 INFO] S46.SIG(18)
[sigmove 02:27:50 DEBUG] transformed S46Ma.SPC -> S46MA.SPC
[sigmove 02:27:50 DEBUG] transformed S46Mb.SPC -> S46MB.SPC
[sigmove 02:27:50 DEBUG] transformed S46Mc.SPC -> S46MC.SPC
[sigmove 02:27:50 DEBUG] transformed S46Md.SPC -> S46MD.SPC
[sigmove 02:27:50 DEBUG] transformed S46Me.SPC -> S46ME.SPC
[sigmove 02:27:50 DEBUG] transformed S46Mf.SPC -> S46MF.SPC
[Status 02:27:50 INFO] data for S46 transferred to science data processing
[Tidy 02:27:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:27:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:27:50 INFO] resetting WatchDogTimer
[Status 02:27:50 INFO] Starting Set [AERI set: name T46, 6 scans, 0 angle, D16300 command]
[Ingest 02:27:50 INFO] Sending XML status message
[Status 02:27:50 INFO] Mirror angle: 0
[Mirror 02:27:50 INFO] rotating to position T
[Status 02:27:50 INFO] .SET file for ACQ96 ready
[Ingest 02:27:50 INFO] Starting acquisition
[Status 02:27:50 INFO] reading housekeeping
[Status 02:28:09 INFO] acquire complete
[Status 02:28:09 INFO] writing housekeeping
[Sequencer 02:28:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:28:09 INFO] incremented T scene to 46 completed views
[Sequencer 02:28:09 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:28:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:28:09 INFO] incremented to [AERI set: name U46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:28:09 INFO] T46.SIG(18)
[sigmove 02:28:09 DEBUG] transformed T46Ma.SPC -> T46MA.SPC
[sigmove 02:28:09 DEBUG] transformed T46Mb.SPC -> T46MB.SPC
[sigmove 02:28:09 DEBUG] transformed T46Mc.SPC -> T46MC.SPC
[sigmove 02:28:09 DEBUG] transformed T46Md.SPC -> T46MD.SPC
[sigmove 02:28:09 DEBUG] transformed T46Me.SPC -> T46ME.SPC
[sigmove 02:28:09 DEBUG] transformed T46Mf.SPC -> T46MF.SPC
[Status 02:28:09 INFO] data for T46 transferred to science data processing
[Tidy 02:28:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:28:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:28:09 INFO] resetting WatchDogTimer
[Status 02:28:09 INFO] Starting Set [AERI set: name U46, 6 scans, 0 angle, D16300 command]
[Ingest 02:28:09 INFO] Sending XML status message
[Status 02:28:09 INFO] Mirror angle: 0
[Mirror 02:28:09 INFO] rotating to position U
[Status 02:28:09 INFO] .SET file for ACQ96 ready
[Ingest 02:28:09 INFO] Starting acquisition
[Status 02:28:09 INFO] reading housekeeping
[Status 02:28:28 INFO] acquire complete
[Status 02:28:28 INFO] writing housekeeping
[Sequencer 02:28:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:28:28 INFO] incremented U scene to 46 completed views
[Sequencer 02:28:28 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:28:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:28:28 INFO] incremented to [AERI set: name V46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:28:28 INFO] U46.SIG(18)
[sigmove 02:28:28 DEBUG] transformed U46Ma.SPC -> U46MA.SPC
[sigmove 02:28:28 DEBUG] transformed U46Mb.SPC -> U46MB.SPC
[sigmove 02:28:28 DEBUG] transformed U46Mc.SPC -> U46MC.SPC
[sigmove 02:28:28 DEBUG] transformed U46Md.SPC -> U46MD.SPC
[sigmove 02:28:28 DEBUG] transformed U46Me.SPC -> U46ME.SPC
[sigmove 02:28:28 DEBUG] transformed U46Mf.SPC -> U46MF.SPC
[Status 02:28:28 INFO] data for U46 transferred to science data processing
[Tidy 02:28:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:28:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:28:28 INFO] resetting WatchDogTimer
[Status 02:28:28 INFO] Starting Set [AERI set: name V46, 6 scans, 0 angle, D16300 command]
[Ingest 02:28:28 INFO] Sending XML status message
[Status 02:28:28 INFO] Mirror angle: 0
[Mirror 02:28:28 INFO] rotating to position V
[Status 02:28:28 INFO] .SET file for ACQ96 ready
[Ingest 02:28:29 INFO] Starting acquisition
[Status 02:28:29 INFO] reading housekeeping
[Status 02:28:47 INFO] acquire complete
[Status 02:28:47 INFO] writing housekeeping
[Sequencer 02:28:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:28:47 INFO] incremented V scene to 46 completed views
[Sequencer 02:28:47 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:28:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:28:47 INFO] incremented to [AERI set: name W46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:28:47 INFO] V46.SIG(18)
[sigmove 02:28:47 DEBUG] transformed V46Ma.SPC -> V46MA.SPC
[sigmove 02:28:47 DEBUG] transformed V46Mb.SPC -> V46MB.SPC
[sigmove 02:28:47 DEBUG] transformed V46Mc.SPC -> V46MC.SPC
[sigmove 02:28:47 DEBUG] transformed V46Md.SPC -> V46MD.SPC
[sigmove 02:28:47 DEBUG] transformed V46Me.SPC -> V46ME.SPC
[sigmove 02:28:47 DEBUG] transformed V46Mf.SPC -> V46MF.SPC
[Status 02:28:47 INFO] data for V46 transferred to science data processing
[Tidy 02:28:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:28:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:28:47 INFO] resetting WatchDogTimer
[Status 02:28:47 INFO] Starting Set [AERI set: name W46, 6 scans, 0 angle, D16300 command]
[Ingest 02:28:47 INFO] Sending XML status message
[Status 02:28:47 INFO] Mirror angle: 0
[Mirror 02:28:47 INFO] rotating to position W
[Status 02:28:48 INFO] .SET file for ACQ96 ready
[Ingest 02:28:48 INFO] Starting acquisition
[Status 02:28:48 INFO] reading housekeeping
[Status 02:29:06 INFO] acquire complete
[Status 02:29:06 INFO] writing housekeeping
[Sequencer 02:29:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:29:06 INFO] incremented W scene to 46 completed views
[Sequencer 02:29:06 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:29:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:29:06 INFO] incremented to [AERI set: name X46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:29:06 INFO] W46.SIG(18)
[sigmove 02:29:06 DEBUG] transformed W46Ma.SPC -> W46MA.SPC
[sigmove 02:29:06 DEBUG] transformed W46Mb.SPC -> W46MB.SPC
[sigmove 02:29:06 DEBUG] transformed W46Mc.SPC -> W46MC.SPC
[sigmove 02:29:06 DEBUG] transformed W46Md.SPC -> W46MD.SPC
[sigmove 02:29:06 DEBUG] transformed W46Me.SPC -> W46ME.SPC
[sigmove 02:29:06 DEBUG] transformed W46Mf.SPC -> W46MF.SPC
[Status 02:29:06 INFO] data for W46 transferred to science data processing
[Tidy 02:29:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:29:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:29:06 INFO] resetting WatchDogTimer
[Status 02:29:06 INFO] Starting Set [AERI set: name X46, 6 scans, 0 angle, D16300 command]
[Ingest 02:29:06 INFO] Sending XML status message
[Status 02:29:06 INFO] Mirror angle: 0
[Mirror 02:29:06 INFO] rotating to position X
[Status 02:29:07 INFO] .SET file for ACQ96 ready
[Ingest 02:29:07 INFO] Starting acquisition
[Status 02:29:07 INFO] reading housekeeping
[Status 02:29:25 INFO] acquire complete
[Status 02:29:25 INFO] writing housekeeping
[Sequencer 02:29:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:29:25 INFO] incremented X scene to 46 completed views
[Sequencer 02:29:25 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:29:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:29:25 INFO] incremented to [AERI set: name Y46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:29:25 INFO] X46.SIG(18)
[sigmove 02:29:25 DEBUG] transformed X46Ma.SPC -> X46MA.SPC
[sigmove 02:29:25 DEBUG] transformed X46Mb.SPC -> X46MB.SPC
[sigmove 02:29:25 DEBUG] transformed X46Mc.SPC -> X46MC.SPC
[sigmove 02:29:25 DEBUG] transformed X46Md.SPC -> X46MD.SPC
[sigmove 02:29:25 DEBUG] transformed X46Me.SPC -> X46ME.SPC
[sigmove 02:29:25 DEBUG] transformed X46Mf.SPC -> X46MF.SPC
[Status 02:29:25 INFO] data for X46 transferred to science data processing
[Tidy 02:29:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:29:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:29:25 INFO] resetting WatchDogTimer
[Status 02:29:25 INFO] Starting Set [AERI set: name Y46, 6 scans, 0 angle, D16300 command]
[Ingest 02:29:25 INFO] Sending XML status message
[Status 02:29:25 INFO] Mirror angle: 0
[Mirror 02:29:25 INFO] rotating to position Y
[Status 02:29:26 INFO] .SET file for ACQ96 ready
[Ingest 02:29:26 INFO] Starting acquisition
[Status 02:29:26 INFO] reading housekeeping
[Status 02:29:44 INFO] acquire complete
[Status 02:29:44 INFO] writing housekeeping
[Sequencer 02:29:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:29:44 INFO] incremented Y scene to 46 completed views
[Sequencer 02:29:44 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:29:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:29:44 INFO] incremented to [AERI set: name Z46, 6 scans, 0 angle, D16300 command] set
[sigmove 02:29:44 INFO] Y46.SIG(18)
[sigmove 02:29:44 DEBUG] transformed Y46Ma.SPC -> Y46MA.SPC
[sigmove 02:29:44 DEBUG] transformed Y46Mb.SPC -> Y46MB.SPC
[sigmove 02:29:44 DEBUG] transformed Y46Mc.SPC -> Y46MC.SPC
[sigmove 02:29:44 DEBUG] transformed Y46Md.SPC -> Y46MD.SPC
[sigmove 02:29:44 DEBUG] transformed Y46Me.SPC -> Y46ME.SPC
[sigmove 02:29:44 DEBUG] transformed Y46Mf.SPC -> Y46MF.SPC
[Status 02:29:44 INFO] data for Y46 transferred to science data processing
[Tidy 02:29:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:29:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:29:44 INFO] resetting WatchDogTimer
[Status 02:29:44 INFO] Starting Set [AERI set: name Z46, 6 scans, 0 angle, D16300 command]
[Ingest 02:29:44 INFO] Sending XML status message
[Status 02:29:44 INFO] Mirror angle: 0
[Mirror 02:29:45 INFO] rotating to position Z
[Status 02:29:45 INFO] .SET file for ACQ96 ready
[Ingest 02:29:45 INFO] Starting acquisition
[Status 02:29:45 INFO] reading housekeeping
[Status 02:30:03 INFO] acquire complete
[Status 02:30:03 INFO] writing housekeeping
[Sequencer 02:30:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:30:03 INFO] incremented Z scene to 46 completed views
[Sequencer 02:30:03 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:30:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:30:03 INFO] incremented to [AERI set: name H47, 6 scans, 60 angle, D22500 command] set
[sigmove 02:30:03 INFO] Z46.SIG(18)
[sigmove 02:30:03 DEBUG] transformed Z46Ma.SPC -> Z46MA.SPC
[sigmove 02:30:03 DEBUG] transformed Z46Mb.SPC -> Z46MB.SPC
[sigmove 02:30:03 DEBUG] transformed Z46Mc.SPC -> Z46MC.SPC
[sigmove 02:30:03 DEBUG] transformed Z46Md.SPC -> Z46MD.SPC
[sigmove 02:30:03 DEBUG] transformed Z46Me.SPC -> Z46ME.SPC
[sigmove 02:30:03 DEBUG] transformed Z46Mf.SPC -> Z46MF.SPC
[Status 02:30:03 INFO] data for Z46 transferred to science data processing
[Tidy 02:30:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:30:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:30:03 INFO] resetting WatchDogTimer
[Status 02:30:04 INFO] Starting Set [AERI set: name H47, 6 scans, 60 angle, D22500 command]
[Ingest 02:30:04 INFO] Sending XML status message
[Status 02:30:04 INFO] Mirror angle: 60
[Mirror 02:30:04 INFO] rotating to position H
[Status 02:30:04 INFO] .SET file for ACQ96 ready
[Ingest 02:30:04 INFO] Starting acquisition
[Status 02:30:05 INFO] reading housekeeping
[Status 02:30:22 INFO] acquire complete
[Status 02:30:22 INFO] writing housekeeping
[Sequencer 02:30:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:30:22 INFO] incremented H scene to 47 completed views
[Sequencer 02:30:22 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:30:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:30:22 INFO] incremented to [AERI set: name A47, 6 scans, 120 angle, D28300 command] set
[sigmove 02:30:22 INFO] H47.SIG(18)
[sigmove 02:30:23 DEBUG] transformed H47Ma.SPC -> H47MA.SPC
[sigmove 02:30:23 DEBUG] transformed H47Mb.SPC -> H47MB.SPC
[sigmove 02:30:23 DEBUG] transformed H47Mc.SPC -> H47MC.SPC
[sigmove 02:30:23 DEBUG] transformed H47Md.SPC -> H47MD.SPC
[sigmove 02:30:23 DEBUG] transformed H47Me.SPC -> H47ME.SPC
[sigmove 02:30:23 DEBUG] transformed H47Mf.SPC -> H47MF.SPC
[Status 02:30:23 INFO] data for H47 transferred to science data processing
[Tidy 02:30:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:30:23 INFO] A45.FIN(19),H45.FIN(19),S45.FIN(19),T45.FIN(19),U45.FIN(19),V45.FIN(19),W45.FIN(19),X45.FIN(19),Y45.FIN(19),Z45.FIN(19),A46.FIN(19),H46.FIN(19),S46.FIN(19),T46.FIN(19),U46.FIN(19),V46.FIN(19),W46.FIN(19),X46.FIN(19),Y46.FIN(19),Z46.FIN(19)
[sigmove 02:30:23 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:30:23 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:30:24 DEBUG] done zipping
[WatchDog 02:30:24 INFO] resetting WatchDogTimer
[Status 02:30:24 INFO] Starting Set [AERI set: name A47, 6 scans, 120 angle, D28300 command]
[Ingest 02:30:24 INFO] Sending XML status message
[Status 02:30:24 INFO] Mirror angle: 120
[Mirror 02:30:24 INFO] rotating to position A
[Status 02:30:25 INFO] .SET file for ACQ96 ready
[Ingest 02:30:25 INFO] Starting acquisition
[Status 02:30:25 INFO] reading housekeeping
[Status 02:30:42 INFO] acquire complete
[Status 02:30:43 INFO] writing housekeeping
[Sequencer 02:30:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:30:43 INFO] incremented A scene to 47 completed views
[Sequencer 02:30:43 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:30:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:30:43 INFO] incremented to [AERI set: name S47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:30:43 INFO] A47.SIG(18)
[sigmove 02:30:43 DEBUG] transformed A47Ma.SPC -> A47MA.SPC
[sigmove 02:30:43 DEBUG] transformed A47Mb.SPC -> A47MB.SPC
[sigmove 02:30:43 DEBUG] transformed A47Mc.SPC -> A47MC.SPC
[sigmove 02:30:43 DEBUG] transformed A47Md.SPC -> A47MD.SPC
[sigmove 02:30:43 DEBUG] transformed A47Me.SPC -> A47ME.SPC
[sigmove 02:30:43 DEBUG] transformed A47Mf.SPC -> A47MF.SPC
[Status 02:30:43 INFO] data for A47 transferred to science data processing
[Tidy 02:30:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:30:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:30:43 INFO] resetting WatchDogTimer
[Status 02:30:43 INFO] Starting Set [AERI set: name S47, 6 scans, 0 angle, D16300 command]
[Ingest 02:30:43 INFO] Sending XML status message
[Status 02:30:43 INFO] Mirror angle: 0
[Mirror 02:30:43 INFO] rotating to position S
[Status 02:30:44 INFO] .SET file for ACQ96 ready
[Ingest 02:30:44 INFO] Starting acquisition
[Status 02:30:44 INFO] reading housekeeping
[Status 02:31:06 INFO] acquire complete
[Status 02:31:06 INFO] writing housekeeping
[Sequencer 02:31:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:31:06 INFO] incremented S scene to 47 completed views
[Sequencer 02:31:06 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:31:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:31:06 INFO] incremented to [AERI set: name T47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:31:06 INFO] S47.SIG(18)
[sigmove 02:31:06 DEBUG] transformed S47Ma.SPC -> S47MA.SPC
[sigmove 02:31:06 DEBUG] transformed S47Mb.SPC -> S47MB.SPC
[sigmove 02:31:06 DEBUG] transformed S47Mc.SPC -> S47MC.SPC
[sigmove 02:31:06 DEBUG] transformed S47Md.SPC -> S47MD.SPC
[sigmove 02:31:06 DEBUG] transformed S47Me.SPC -> S47ME.SPC
[sigmove 02:31:06 DEBUG] transformed S47Mf.SPC -> S47MF.SPC
[Status 02:31:06 INFO] data for S47 transferred to science data processing
[Tidy 02:31:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:31:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:31:06 INFO] resetting WatchDogTimer
[Status 02:31:06 INFO] Starting Set [AERI set: name T47, 6 scans, 0 angle, D16300 command]
[Ingest 02:31:06 INFO] Sending XML status message
[Status 02:31:06 INFO] Mirror angle: 0
[Mirror 02:31:07 INFO] rotating to position T
[Status 02:31:07 INFO] .SET file for ACQ96 ready
[Ingest 02:31:07 INFO] Starting acquisition
[Status 02:31:07 INFO] reading housekeeping
[Status 02:31:25 INFO] acquire complete
[Status 02:31:25 INFO] writing housekeeping
[Sequencer 02:31:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:31:25 INFO] incremented T scene to 47 completed views
[Sequencer 02:31:25 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:31:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:31:25 INFO] incremented to [AERI set: name U47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:31:25 INFO] T47.SIG(18)
[sigmove 02:31:25 DEBUG] transformed T47Ma.SPC -> T47MA.SPC
[sigmove 02:31:25 DEBUG] transformed T47Mb.SPC -> T47MB.SPC
[sigmove 02:31:25 DEBUG] transformed T47Mc.SPC -> T47MC.SPC
[sigmove 02:31:25 DEBUG] transformed T47Md.SPC -> T47MD.SPC
[sigmove 02:31:25 DEBUG] transformed T47Me.SPC -> T47ME.SPC
[sigmove 02:31:25 DEBUG] transformed T47Mf.SPC -> T47MF.SPC
[Status 02:31:25 INFO] data for T47 transferred to science data processing
[Tidy 02:31:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:31:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:31:25 INFO] resetting WatchDogTimer
[Status 02:31:25 INFO] Starting Set [AERI set: name U47, 6 scans, 0 angle, D16300 command]
[Ingest 02:31:25 INFO] Sending XML status message
[Status 02:31:25 INFO] Mirror angle: 0
[Mirror 02:31:26 INFO] rotating to position U
[Status 02:31:26 INFO] .SET file for ACQ96 ready
[Ingest 02:31:26 INFO] Starting acquisition
[Status 02:31:26 INFO] reading housekeeping
[Status 02:31:44 INFO] acquire complete
[Status 02:31:44 INFO] writing housekeeping
[Sequencer 02:31:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:31:44 INFO] incremented U scene to 47 completed views
[Sequencer 02:31:44 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:31:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:31:44 INFO] incremented to [AERI set: name V47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:31:44 INFO] U47.SIG(18)
[sigmove 02:31:44 DEBUG] transformed U47Ma.SPC -> U47MA.SPC
[sigmove 02:31:44 DEBUG] transformed U47Mb.SPC -> U47MB.SPC
[sigmove 02:31:44 DEBUG] transformed U47Mc.SPC -> U47MC.SPC
[sigmove 02:31:44 DEBUG] transformed U47Md.SPC -> U47MD.SPC
[sigmove 02:31:44 DEBUG] transformed U47Me.SPC -> U47ME.SPC
[sigmove 02:31:44 DEBUG] transformed U47Mf.SPC -> U47MF.SPC
[Status 02:31:44 INFO] data for U47 transferred to science data processing
[Tidy 02:31:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:31:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:31:44 INFO] resetting WatchDogTimer
[Status 02:31:45 INFO] Starting Set [AERI set: name V47, 6 scans, 0 angle, D16300 command]
[Ingest 02:31:45 INFO] Sending XML status message
[Status 02:31:45 INFO] Mirror angle: 0
[Mirror 02:31:45 INFO] rotating to position V
[Status 02:31:45 INFO] .SET file for ACQ96 ready
[Ingest 02:31:45 INFO] Starting acquisition
[Status 02:31:45 INFO] reading housekeeping
[Status 02:32:03 INFO] acquire complete
[Status 02:32:04 INFO] writing housekeeping
[Sequencer 02:32:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:32:04 INFO] incremented V scene to 47 completed views
[Sequencer 02:32:04 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:32:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:32:04 INFO] incremented to [AERI set: name W47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:32:04 INFO] V47.SIG(18)
[sigmove 02:32:04 DEBUG] transformed V47Ma.SPC -> V47MA.SPC
[sigmove 02:32:04 DEBUG] transformed V47Mb.SPC -> V47MB.SPC
[sigmove 02:32:04 DEBUG] transformed V47Mc.SPC -> V47MC.SPC
[sigmove 02:32:04 DEBUG] transformed V47Md.SPC -> V47MD.SPC
[sigmove 02:32:04 DEBUG] transformed V47Me.SPC -> V47ME.SPC
[sigmove 02:32:04 DEBUG] transformed V47Mf.SPC -> V47MF.SPC
[Status 02:32:04 INFO] data for V47 transferred to science data processing
[Tidy 02:32:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:32:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:32:04 INFO] resetting WatchDogTimer
[Status 02:32:04 INFO] Starting Set [AERI set: name W47, 6 scans, 0 angle, D16300 command]
[Ingest 02:32:04 INFO] Sending XML status message
[Status 02:32:04 INFO] Mirror angle: 0
[Mirror 02:32:04 INFO] rotating to position W
[Status 02:32:04 INFO] .SET file for ACQ96 ready
[Ingest 02:32:04 INFO] Starting acquisition
[Status 02:32:04 INFO] reading housekeeping
[Status 02:32:22 INFO] acquire complete
[Status 02:32:23 INFO] writing housekeeping
[Sequencer 02:32:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:32:23 INFO] incremented W scene to 47 completed views
[Sequencer 02:32:23 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:32:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:32:23 INFO] incremented to [AERI set: name X47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:32:23 INFO] W47.SIG(18)
[sigmove 02:32:23 DEBUG] transformed W47Ma.SPC -> W47MA.SPC
[sigmove 02:32:23 DEBUG] transformed W47Mb.SPC -> W47MB.SPC
[sigmove 02:32:23 DEBUG] transformed W47Mc.SPC -> W47MC.SPC
[sigmove 02:32:23 DEBUG] transformed W47Md.SPC -> W47MD.SPC
[sigmove 02:32:23 DEBUG] transformed W47Me.SPC -> W47ME.SPC
[sigmove 02:32:23 DEBUG] transformed W47Mf.SPC -> W47MF.SPC
[Status 02:32:23 INFO] data for W47 transferred to science data processing
[Tidy 02:32:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:32:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:32:23 INFO] resetting WatchDogTimer
[Status 02:32:23 INFO] Starting Set [AERI set: name X47, 6 scans, 0 angle, D16300 command]
[Ingest 02:32:23 INFO] Sending XML status message
[Status 02:32:23 INFO] Mirror angle: 0
[Mirror 02:32:23 INFO] rotating to position X
[Status 02:32:23 INFO] .SET file for ACQ96 ready
[Ingest 02:32:23 INFO] Starting acquisition
[Status 02:32:23 INFO] reading housekeeping
[Status 02:32:41 INFO] acquire complete
[Status 02:32:42 INFO] writing housekeeping
[Sequencer 02:32:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:32:42 INFO] incremented X scene to 47 completed views
[Sequencer 02:32:42 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:32:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:32:42 INFO] incremented to [AERI set: name Y47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:32:42 INFO] X47.SIG(18)
[sigmove 02:32:42 DEBUG] transformed X47Ma.SPC -> X47MA.SPC
[sigmove 02:32:42 DEBUG] transformed X47Mb.SPC -> X47MB.SPC
[sigmove 02:32:42 DEBUG] transformed X47Mc.SPC -> X47MC.SPC
[sigmove 02:32:42 DEBUG] transformed X47Md.SPC -> X47MD.SPC
[sigmove 02:32:42 DEBUG] transformed X47Me.SPC -> X47ME.SPC
[sigmove 02:32:42 DEBUG] transformed X47Mf.SPC -> X47MF.SPC
[Status 02:32:42 INFO] data for X47 transferred to science data processing
[Tidy 02:32:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:32:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:32:42 INFO] resetting WatchDogTimer
[Status 02:32:42 INFO] Starting Set [AERI set: name Y47, 6 scans, 0 angle, D16300 command]
[Ingest 02:32:42 INFO] Sending XML status message
[Status 02:32:42 INFO] Mirror angle: 0
[Mirror 02:32:42 INFO] rotating to position Y
[Status 02:32:42 INFO] .SET file for ACQ96 ready
[Ingest 02:32:42 INFO] Starting acquisition
[Status 02:32:42 INFO] reading housekeeping
[Status 02:33:00 INFO] acquire complete
[Status 02:33:01 INFO] writing housekeeping
[Sequencer 02:33:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:33:01 INFO] incremented Y scene to 47 completed views
[Sequencer 02:33:01 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:33:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:33:01 INFO] incremented to [AERI set: name Z47, 6 scans, 0 angle, D16300 command] set
[sigmove 02:33:01 INFO] Y47.SIG(18)
[sigmove 02:33:01 DEBUG] transformed Y47Ma.SPC -> Y47MA.SPC
[sigmove 02:33:01 DEBUG] transformed Y47Mb.SPC -> Y47MB.SPC
[sigmove 02:33:01 DEBUG] transformed Y47Mc.SPC -> Y47MC.SPC
[sigmove 02:33:01 DEBUG] transformed Y47Md.SPC -> Y47MD.SPC
[sigmove 02:33:01 DEBUG] transformed Y47Me.SPC -> Y47ME.SPC
[sigmove 02:33:01 DEBUG] transformed Y47Mf.SPC -> Y47MF.SPC
[Status 02:33:01 INFO] data for Y47 transferred to science data processing
[Tidy 02:33:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:33:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:33:01 INFO] resetting WatchDogTimer
[Status 02:33:01 INFO] Starting Set [AERI set: name Z47, 6 scans, 0 angle, D16300 command]
[Ingest 02:33:01 INFO] Sending XML status message
[Status 02:33:01 INFO] Mirror angle: 0
[Mirror 02:33:01 INFO] rotating to position Z
[Status 02:33:01 INFO] .SET file for ACQ96 ready
[Ingest 02:33:01 INFO] Starting acquisition
[Status 02:33:01 INFO] reading housekeeping
[Status 02:33:20 INFO] acquire complete
[Status 02:33:20 INFO] writing housekeeping
[Sequencer 02:33:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:33:20 INFO] incremented Z scene to 47 completed views
[Sequencer 02:33:20 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:33:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:33:20 INFO] incremented to [AERI set: name A48, 6 scans, 120 angle, D28300 command] set
[sigmove 02:33:20 INFO] Z47.SIG(18)
[sigmove 02:33:20 DEBUG] transformed Z47Ma.SPC -> Z47MA.SPC
[sigmove 02:33:20 DEBUG] transformed Z47Mb.SPC -> Z47MB.SPC
[sigmove 02:33:20 DEBUG] transformed Z47Mc.SPC -> Z47MC.SPC
[sigmove 02:33:20 DEBUG] transformed Z47Md.SPC -> Z47MD.SPC
[sigmove 02:33:20 DEBUG] transformed Z47Me.SPC -> Z47ME.SPC
[sigmove 02:33:20 DEBUG] transformed Z47Mf.SPC -> Z47MF.SPC
[Status 02:33:20 INFO] data for Z47 transferred to science data processing
[Tidy 02:33:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:33:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:33:20 INFO] resetting WatchDogTimer
[Status 02:33:20 INFO] Starting Set [AERI set: name A48, 6 scans, 120 angle, D28300 command]
[Ingest 02:33:20 INFO] Sending XML status message
[Status 02:33:20 INFO] Mirror angle: 120
[Mirror 02:33:20 INFO] rotating to position A
[Status 02:33:21 INFO] .SET file for ACQ96 ready
[Ingest 02:33:21 INFO] Starting acquisition
[Status 02:33:22 INFO] reading housekeeping
[Status 02:33:40 INFO] acquire complete
[Status 02:33:40 INFO] writing housekeeping
[Sequencer 02:33:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:33:40 INFO] incremented A scene to 48 completed views
[Sequencer 02:33:40 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:33:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:33:40 INFO] incremented to [AERI set: name H48, 6 scans, 60 angle, D22500 command] set
[sigmove 02:33:40 INFO] A48.SIG(18)
[sigmove 02:33:40 DEBUG] transformed A48Ma.SPC -> A48MA.SPC
[sigmove 02:33:40 DEBUG] transformed A48Mb.SPC -> A48MB.SPC
[sigmove 02:33:40 DEBUG] transformed A48Mc.SPC -> A48MC.SPC
[sigmove 02:33:40 DEBUG] transformed A48Md.SPC -> A48MD.SPC
[sigmove 02:33:40 DEBUG] transformed A48Me.SPC -> A48ME.SPC
[sigmove 02:33:40 DEBUG] transformed A48Mf.SPC -> A48MF.SPC
[Status 02:33:40 INFO] data for A48 transferred to science data processing
[Tidy 02:33:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:33:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:33:40 INFO] resetting WatchDogTimer
[Status 02:33:40 INFO] Starting Set [AERI set: name H48, 6 scans, 60 angle, D22500 command]
[Ingest 02:33:40 INFO] Sending XML status message
[Status 02:33:40 INFO] Mirror angle: 60
[Mirror 02:33:40 INFO] rotating to position H
[Status 02:33:41 INFO] .SET file for ACQ96 ready
[Ingest 02:33:41 INFO] Starting acquisition
[Status 02:33:41 INFO] reading housekeeping
[Status 02:33:59 INFO] acquire complete
[Status 02:33:59 INFO] writing housekeeping
[Sequencer 02:33:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:33:59 INFO] incremented H scene to 48 completed views
[Sequencer 02:33:59 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:33:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:33:59 INFO] incremented to [AERI set: name S48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:33:59 INFO] H48.SIG(18)
[sigmove 02:33:59 DEBUG] transformed H48Ma.SPC -> H48MA.SPC
[sigmove 02:33:59 DEBUG] transformed H48Mb.SPC -> H48MB.SPC
[sigmove 02:33:59 DEBUG] transformed H48Mc.SPC -> H48MC.SPC
[sigmove 02:33:59 DEBUG] transformed H48Md.SPC -> H48MD.SPC
[sigmove 02:33:59 DEBUG] transformed H48Me.SPC -> H48ME.SPC
[sigmove 02:33:59 DEBUG] transformed H48Mf.SPC -> H48MF.SPC
[Status 02:33:59 INFO] data for H48 transferred to science data processing
[Tidy 02:33:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:33:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:33:59 INFO] resetting WatchDogTimer
[Status 02:33:59 INFO] Starting Set [AERI set: name S48, 6 scans, 0 angle, D16300 command]
[Ingest 02:33:59 INFO] Sending XML status message
[Status 02:33:59 INFO] Mirror angle: 0
[Mirror 02:33:59 INFO] rotating to position S
[Status 02:34:00 INFO] .SET file for ACQ96 ready
[Ingest 02:34:00 INFO] Starting acquisition
[Status 02:34:00 INFO] reading housekeeping
[Status 02:34:18 INFO] acquire complete
[Status 02:34:18 INFO] writing housekeeping
[Sequencer 02:34:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:34:18 INFO] incremented S scene to 48 completed views
[Sequencer 02:34:18 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:34:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:34:18 INFO] incremented to [AERI set: name T48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:34:18 INFO] S48.SIG(18)
[sigmove 02:34:18 DEBUG] transformed S48Ma.SPC -> S48MA.SPC
[sigmove 02:34:18 DEBUG] transformed S48Mb.SPC -> S48MB.SPC
[sigmove 02:34:18 DEBUG] transformed S48Mc.SPC -> S48MC.SPC
[sigmove 02:34:18 DEBUG] transformed S48Md.SPC -> S48MD.SPC
[sigmove 02:34:18 DEBUG] transformed S48Me.SPC -> S48ME.SPC
[sigmove 02:34:18 DEBUG] transformed S48Mf.SPC -> S48MF.SPC
[Status 02:34:18 INFO] data for S48 transferred to science data processing
[Tidy 02:34:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:34:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:34:18 INFO] resetting WatchDogTimer
[Status 02:34:18 INFO] Starting Set [AERI set: name T48, 6 scans, 0 angle, D16300 command]
[Ingest 02:34:18 INFO] Sending XML status message
[Status 02:34:18 INFO] Mirror angle: 0
[Mirror 02:34:19 INFO] rotating to position T
[Status 02:34:19 INFO] .SET file for ACQ96 ready
[Ingest 02:34:19 INFO] Starting acquisition
[Status 02:34:19 INFO] reading housekeeping
[Status 02:34:37 INFO] acquire complete
[Status 02:34:37 INFO] writing housekeeping
[Sequencer 02:34:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:34:37 INFO] incremented T scene to 48 completed views
[Sequencer 02:34:37 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:34:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:34:37 INFO] incremented to [AERI set: name U48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:34:37 INFO] T48.SIG(18)
[sigmove 02:34:37 DEBUG] transformed T48Ma.SPC -> T48MA.SPC
[sigmove 02:34:37 DEBUG] transformed T48Mb.SPC -> T48MB.SPC
[sigmove 02:34:37 DEBUG] transformed T48Mc.SPC -> T48MC.SPC
[sigmove 02:34:37 DEBUG] transformed T48Md.SPC -> T48MD.SPC
[sigmove 02:34:37 DEBUG] transformed T48Me.SPC -> T48ME.SPC
[sigmove 02:34:37 DEBUG] transformed T48Mf.SPC -> T48MF.SPC
[Status 02:34:37 INFO] data for T48 transferred to science data processing
[Tidy 02:34:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:34:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:34:37 INFO] resetting WatchDogTimer
[Status 02:34:37 INFO] Starting Set [AERI set: name U48, 6 scans, 0 angle, D16300 command]
[Ingest 02:34:37 INFO] Sending XML status message
[Status 02:34:37 INFO] Mirror angle: 0
[Mirror 02:34:38 INFO] rotating to position U
[Status 02:34:38 INFO] .SET file for ACQ96 ready
[Ingest 02:34:38 INFO] Starting acquisition
[Status 02:34:38 INFO] reading housekeeping
[Status 02:34:56 INFO] acquire complete
[Status 02:34:56 INFO] writing housekeeping
[Sequencer 02:34:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:34:56 INFO] incremented U scene to 48 completed views
[Sequencer 02:34:56 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:34:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:34:56 INFO] incremented to [AERI set: name V48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:34:56 INFO] U48.SIG(18)
[sigmove 02:34:56 DEBUG] transformed U48Ma.SPC -> U48MA.SPC
[sigmove 02:34:56 DEBUG] transformed U48Mb.SPC -> U48MB.SPC
[sigmove 02:34:56 DEBUG] transformed U48Mc.SPC -> U48MC.SPC
[sigmove 02:34:56 DEBUG] transformed U48Md.SPC -> U48MD.SPC
[sigmove 02:34:56 DEBUG] transformed U48Me.SPC -> U48ME.SPC
[sigmove 02:34:56 DEBUG] transformed U48Mf.SPC -> U48MF.SPC
[Status 02:34:56 INFO] data for U48 transferred to science data processing
[Tidy 02:34:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:34:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:34:56 INFO] resetting WatchDogTimer
[Status 02:34:57 INFO] Starting Set [AERI set: name V48, 6 scans, 0 angle, D16300 command]
[Ingest 02:34:57 INFO] Sending XML status message
[Status 02:34:57 INFO] Mirror angle: 0
[Mirror 02:34:57 INFO] rotating to position V
[Status 02:34:57 INFO] .SET file for ACQ96 ready
[Ingest 02:34:57 INFO] Starting acquisition
[Status 02:34:57 INFO] reading housekeeping
[Status 02:35:15 INFO] acquire complete
[Status 02:35:16 INFO] writing housekeeping
[Sequencer 02:35:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:35:16 INFO] incremented V scene to 48 completed views
[Sequencer 02:35:16 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:35:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:35:16 INFO] incremented to [AERI set: name W48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:35:16 INFO] V48.SIG(18)
[sigmove 02:35:16 DEBUG] transformed V48Ma.SPC -> V48MA.SPC
[sigmove 02:35:16 DEBUG] transformed V48Mb.SPC -> V48MB.SPC
[sigmove 02:35:16 DEBUG] transformed V48Mc.SPC -> V48MC.SPC
[sigmove 02:35:16 DEBUG] transformed V48Md.SPC -> V48MD.SPC
[sigmove 02:35:16 DEBUG] transformed V48Me.SPC -> V48ME.SPC
[sigmove 02:35:16 DEBUG] transformed V48Mf.SPC -> V48MF.SPC
[Status 02:35:16 INFO] data for V48 transferred to science data processing
[Tidy 02:35:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:35:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:35:16 INFO] resetting WatchDogTimer
[Status 02:35:16 INFO] Starting Set [AERI set: name W48, 6 scans, 0 angle, D16300 command]
[Ingest 02:35:16 INFO] Sending XML status message
[Status 02:35:16 INFO] Mirror angle: 0
[Mirror 02:35:16 INFO] rotating to position W
[Status 02:35:16 INFO] .SET file for ACQ96 ready
[Ingest 02:35:16 INFO] Starting acquisition
[Status 02:35:16 INFO] reading housekeeping
[Status 02:35:34 INFO] acquire complete
[Status 02:35:35 INFO] writing housekeeping
[Sequencer 02:35:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:35:35 INFO] incremented W scene to 48 completed views
[Sequencer 02:35:35 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:35:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:35:35 INFO] incremented to [AERI set: name X48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:35:35 INFO] W48.SIG(18)
[sigmove 02:35:35 DEBUG] transformed W48Ma.SPC -> W48MA.SPC
[sigmove 02:35:35 DEBUG] transformed W48Mb.SPC -> W48MB.SPC
[sigmove 02:35:35 DEBUG] transformed W48Mc.SPC -> W48MC.SPC
[sigmove 02:35:35 DEBUG] transformed W48Md.SPC -> W48MD.SPC
[sigmove 02:35:35 DEBUG] transformed W48Me.SPC -> W48ME.SPC
[sigmove 02:35:35 DEBUG] transformed W48Mf.SPC -> W48MF.SPC
[Status 02:35:35 INFO] data for W48 transferred to science data processing
[Tidy 02:35:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:35:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:35:35 INFO] resetting WatchDogTimer
[Status 02:35:35 INFO] Starting Set [AERI set: name X48, 6 scans, 0 angle, D16300 command]
[Ingest 02:35:35 INFO] Sending XML status message
[Status 02:35:35 INFO] Mirror angle: 0
[Mirror 02:35:35 INFO] rotating to position X
[Status 02:35:35 INFO] .SET file for ACQ96 ready
[Ingest 02:35:35 INFO] Starting acquisition
[Status 02:35:35 INFO] reading housekeeping
[Status 02:35:53 INFO] acquire complete
[Status 02:35:54 INFO] writing housekeeping
[Sequencer 02:35:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:35:54 INFO] incremented X scene to 48 completed views
[Sequencer 02:35:54 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:35:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:35:54 INFO] incremented to [AERI set: name Y48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:35:54 INFO] X48.SIG(18)
[sigmove 02:35:54 DEBUG] transformed X48Ma.SPC -> X48MA.SPC
[sigmove 02:35:54 DEBUG] transformed X48Mb.SPC -> X48MB.SPC
[sigmove 02:35:54 DEBUG] transformed X48Mc.SPC -> X48MC.SPC
[sigmove 02:35:54 DEBUG] transformed X48Md.SPC -> X48MD.SPC
[sigmove 02:35:54 DEBUG] transformed X48Me.SPC -> X48ME.SPC
[sigmove 02:35:54 DEBUG] transformed X48Mf.SPC -> X48MF.SPC
[Status 02:35:54 INFO] data for X48 transferred to science data processing
[Tidy 02:35:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:35:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:35:54 INFO] resetting WatchDogTimer
[Status 02:35:54 INFO] Starting Set [AERI set: name Y48, 6 scans, 0 angle, D16300 command]
[Ingest 02:35:54 INFO] Sending XML status message
[Status 02:35:54 INFO] Mirror angle: 0
[Mirror 02:35:54 INFO] rotating to position Y
[Status 02:35:54 INFO] .SET file for ACQ96 ready
[Ingest 02:35:54 INFO] Starting acquisition
[Status 02:35:54 INFO] reading housekeeping
[Status 02:36:12 INFO] acquire complete
[Status 02:36:13 INFO] writing housekeeping
[Sequencer 02:36:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:36:13 INFO] incremented Y scene to 48 completed views
[Sequencer 02:36:13 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:36:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:36:13 INFO] incremented to [AERI set: name Z48, 6 scans, 0 angle, D16300 command] set
[sigmove 02:36:13 INFO] Y48.SIG(18)
[sigmove 02:36:13 DEBUG] transformed Y48Ma.SPC -> Y48MA.SPC
[sigmove 02:36:13 DEBUG] transformed Y48Mb.SPC -> Y48MB.SPC
[sigmove 02:36:13 DEBUG] transformed Y48Mc.SPC -> Y48MC.SPC
[sigmove 02:36:13 DEBUG] transformed Y48Md.SPC -> Y48MD.SPC
[sigmove 02:36:13 DEBUG] transformed Y48Me.SPC -> Y48ME.SPC
[sigmove 02:36:13 DEBUG] transformed Y48Mf.SPC -> Y48MF.SPC
[Status 02:36:13 INFO] data for Y48 transferred to science data processing
[Tidy 02:36:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:36:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:36:13 INFO] resetting WatchDogTimer
[Status 02:36:13 INFO] Starting Set [AERI set: name Z48, 6 scans, 0 angle, D16300 command]
[Ingest 02:36:13 INFO] Sending XML status message
[Status 02:36:13 INFO] Mirror angle: 0
[Mirror 02:36:13 INFO] rotating to position Z
[Status 02:36:13 INFO] .SET file for ACQ96 ready
[Ingest 02:36:13 INFO] Starting acquisition
[Status 02:36:13 INFO] reading housekeeping
[Status 02:36:31 INFO] acquire complete
[Status 02:36:32 INFO] writing housekeeping
[Sequencer 02:36:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:36:32 INFO] incremented Z scene to 48 completed views
[Sequencer 02:36:32 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:36:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:36:32 INFO] incremented to [AERI set: name H49, 6 scans, 60 angle, D22500 command] set
[sigmove 02:36:32 INFO] Z48.SIG(18)
[sigmove 02:36:32 DEBUG] transformed Z48Ma.SPC -> Z48MA.SPC
[sigmove 02:36:32 DEBUG] transformed Z48Mb.SPC -> Z48MB.SPC
[sigmove 02:36:32 DEBUG] transformed Z48Mc.SPC -> Z48MC.SPC
[sigmove 02:36:32 DEBUG] transformed Z48Md.SPC -> Z48MD.SPC
[sigmove 02:36:32 DEBUG] transformed Z48Me.SPC -> Z48ME.SPC
[sigmove 02:36:32 DEBUG] transformed Z48Mf.SPC -> Z48MF.SPC
[Status 02:36:32 INFO] data for Z48 transferred to science data processing
[Tidy 02:36:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:36:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:36:32 INFO] resetting WatchDogTimer
[Status 02:36:32 INFO] Starting Set [AERI set: name H49, 6 scans, 60 angle, D22500 command]
[Ingest 02:36:32 INFO] Sending XML status message
[Status 02:36:32 INFO] Mirror angle: 60
[Mirror 02:36:32 INFO] rotating to position H
[Status 02:36:33 INFO] .SET file for ACQ96 ready
[Ingest 02:36:33 INFO] Starting acquisition
[Status 02:36:33 INFO] reading housekeeping
[Status 02:36:52 INFO] acquire complete
[Status 02:36:52 INFO] writing housekeeping
[Sequencer 02:36:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:36:52 INFO] incremented H scene to 49 completed views
[Sequencer 02:36:52 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:36:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:36:52 INFO] incremented to [AERI set: name A49, 6 scans, 120 angle, D28300 command] set
[sigmove 02:36:52 INFO] H49.SIG(18)
[sigmove 02:36:52 DEBUG] transformed H49Ma.SPC -> H49MA.SPC
[sigmove 02:36:52 DEBUG] transformed H49Mb.SPC -> H49MB.SPC
[sigmove 02:36:52 DEBUG] transformed H49Mc.SPC -> H49MC.SPC
[sigmove 02:36:52 DEBUG] transformed H49Md.SPC -> H49MD.SPC
[sigmove 02:36:52 DEBUG] transformed H49Me.SPC -> H49ME.SPC
[sigmove 02:36:52 DEBUG] transformed H49Mf.SPC -> H49MF.SPC
[Status 02:36:52 INFO] data for H49 transferred to science data processing
[Tidy 02:36:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:36:52 INFO] A47.FIN(19),H47.FIN(19),S47.FIN(19),T47.FIN(19),U47.FIN(19),V47.FIN(19),W47.FIN(19),X47.FIN(19),Y47.FIN(19),Z47.FIN(19),A48.FIN(19),H48.FIN(19),S48.FIN(19),T48.FIN(19),U48.FIN(19),V48.FIN(19),W48.FIN(19),X48.FIN(19),Y48.FIN(19),Z48.FIN(19)
[sigmove 02:36:52 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:36:52 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:36:53 DEBUG] done zipping
[WatchDog 02:36:53 INFO] resetting WatchDogTimer
[Status 02:36:53 INFO] Starting Set [AERI set: name A49, 6 scans, 120 angle, D28300 command]
[Ingest 02:36:53 INFO] Sending XML status message
[Status 02:36:53 INFO] Mirror angle: 120
[Mirror 02:36:54 INFO] rotating to position A
[Status 02:36:54 INFO] .SET file for ACQ96 ready
[Ingest 02:36:54 INFO] Starting acquisition
[Status 02:36:54 INFO] reading housekeeping
[Status 02:37:12 INFO] acquire complete
[Status 02:37:12 INFO] writing housekeeping
[Sequencer 02:37:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:37:12 INFO] incremented A scene to 49 completed views
[Sequencer 02:37:12 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:37:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:37:12 INFO] incremented to [AERI set: name S49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:37:12 INFO] A49.SIG(18)
[sigmove 02:37:12 DEBUG] transformed A49Ma.SPC -> A49MA.SPC
[sigmove 02:37:12 DEBUG] transformed A49Mb.SPC -> A49MB.SPC
[sigmove 02:37:12 DEBUG] transformed A49Mc.SPC -> A49MC.SPC
[sigmove 02:37:12 DEBUG] transformed A49Md.SPC -> A49MD.SPC
[sigmove 02:37:12 DEBUG] transformed A49Me.SPC -> A49ME.SPC
[sigmove 02:37:12 DEBUG] transformed A49Mf.SPC -> A49MF.SPC
[Status 02:37:12 INFO] data for A49 transferred to science data processing
[Tidy 02:37:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:37:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:37:12 INFO] resetting WatchDogTimer
[Status 02:37:12 INFO] Starting Set [AERI set: name S49, 6 scans, 0 angle, D16300 command]
[Ingest 02:37:12 INFO] Sending XML status message
[Status 02:37:12 INFO] Mirror angle: 0
[Mirror 02:37:13 INFO] rotating to position S
[Status 02:37:14 INFO] .SET file for ACQ96 ready
[Ingest 02:37:14 INFO] Starting acquisition
[Status 02:37:14 INFO] reading housekeeping
[Status 02:37:32 INFO] acquire complete
[Status 02:37:32 INFO] writing housekeeping
[Sequencer 02:37:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:37:33 INFO] incremented S scene to 49 completed views
[Sequencer 02:37:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:37:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:37:33 INFO] incremented to [AERI set: name T49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:37:33 INFO] S49.SIG(18)
[sigmove 02:37:33 DEBUG] transformed S49Ma.SPC -> S49MA.SPC
[sigmove 02:37:33 DEBUG] transformed S49Mb.SPC -> S49MB.SPC
[sigmove 02:37:33 DEBUG] transformed S49Mc.SPC -> S49MC.SPC
[sigmove 02:37:33 DEBUG] transformed S49Md.SPC -> S49MD.SPC
[sigmove 02:37:33 DEBUG] transformed S49Me.SPC -> S49ME.SPC
[sigmove 02:37:33 DEBUG] transformed S49Mf.SPC -> S49MF.SPC
[Status 02:37:33 INFO] data for S49 transferred to science data processing
[Tidy 02:37:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:37:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:37:33 INFO] resetting WatchDogTimer
[Status 02:37:33 INFO] Starting Set [AERI set: name T49, 6 scans, 0 angle, D16300 command]
[Ingest 02:37:33 INFO] Sending XML status message
[Status 02:37:33 INFO] Mirror angle: 0
[Mirror 02:37:33 INFO] rotating to position T
[Status 02:37:33 INFO] .SET file for ACQ96 ready
[Ingest 02:37:33 INFO] Starting acquisition
[Status 02:37:33 INFO] reading housekeeping
[Status 02:37:51 INFO] acquire complete
[Status 02:37:52 INFO] writing housekeeping
[Sequencer 02:37:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:37:52 INFO] incremented T scene to 49 completed views
[Sequencer 02:37:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:37:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:37:52 INFO] incremented to [AERI set: name U49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:37:52 INFO] T49.SIG(18)
[sigmove 02:37:52 DEBUG] transformed T49Ma.SPC -> T49MA.SPC
[sigmove 02:37:52 DEBUG] transformed T49Mb.SPC -> T49MB.SPC
[sigmove 02:37:52 DEBUG] transformed T49Mc.SPC -> T49MC.SPC
[sigmove 02:37:52 DEBUG] transformed T49Md.SPC -> T49MD.SPC
[sigmove 02:37:52 DEBUG] transformed T49Me.SPC -> T49ME.SPC
[sigmove 02:37:52 DEBUG] transformed T49Mf.SPC -> T49MF.SPC
[Status 02:37:52 INFO] data for T49 transferred to science data processing
[Tidy 02:37:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:37:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:37:52 INFO] resetting WatchDogTimer
[Status 02:37:52 INFO] Starting Set [AERI set: name U49, 6 scans, 0 angle, D16300 command]
[Ingest 02:37:52 INFO] Sending XML status message
[Status 02:37:52 INFO] Mirror angle: 0
[Mirror 02:37:52 INFO] rotating to position U
[Status 02:37:52 INFO] .SET file for ACQ96 ready
[Ingest 02:37:52 INFO] Starting acquisition
[Status 02:37:52 INFO] reading housekeeping
[Status 02:38:10 INFO] acquire complete
[Status 02:38:11 INFO] writing housekeeping
[Sequencer 02:38:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:38:11 INFO] incremented U scene to 49 completed views
[Sequencer 02:38:11 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:38:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:38:11 INFO] incremented to [AERI set: name V49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:38:11 INFO] U49.SIG(18)
[sigmove 02:38:11 DEBUG] transformed U49Ma.SPC -> U49MA.SPC
[sigmove 02:38:11 DEBUG] transformed U49Mb.SPC -> U49MB.SPC
[sigmove 02:38:11 DEBUG] transformed U49Mc.SPC -> U49MC.SPC
[sigmove 02:38:11 DEBUG] transformed U49Md.SPC -> U49MD.SPC
[sigmove 02:38:11 DEBUG] transformed U49Me.SPC -> U49ME.SPC
[sigmove 02:38:11 DEBUG] transformed U49Mf.SPC -> U49MF.SPC
[Status 02:38:11 INFO] data for U49 transferred to science data processing
[Tidy 02:38:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:38:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:38:11 INFO] resetting WatchDogTimer
[Status 02:38:11 INFO] Starting Set [AERI set: name V49, 6 scans, 0 angle, D16300 command]
[Ingest 02:38:11 INFO] Sending XML status message
[Status 02:38:11 INFO] Mirror angle: 0
[Mirror 02:38:11 INFO] rotating to position V
[Status 02:38:11 INFO] .SET file for ACQ96 ready
[Ingest 02:38:11 INFO] Starting acquisition
[Status 02:38:11 INFO] reading housekeeping
[Status 02:38:29 INFO] acquire complete
[Status 02:38:30 INFO] writing housekeeping
[Sequencer 02:38:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:38:30 INFO] incremented V scene to 49 completed views
[Sequencer 02:38:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:38:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:38:30 INFO] incremented to [AERI set: name W49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:38:30 INFO] V49.SIG(18)
[sigmove 02:38:30 DEBUG] transformed V49Ma.SPC -> V49MA.SPC
[sigmove 02:38:30 DEBUG] transformed V49Mb.SPC -> V49MB.SPC
[sigmove 02:38:30 DEBUG] transformed V49Mc.SPC -> V49MC.SPC
[sigmove 02:38:30 DEBUG] transformed V49Md.SPC -> V49MD.SPC
[sigmove 02:38:30 DEBUG] transformed V49Me.SPC -> V49ME.SPC
[sigmove 02:38:30 DEBUG] transformed V49Mf.SPC -> V49MF.SPC
[Status 02:38:30 INFO] data for V49 transferred to science data processing
[Tidy 02:38:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:38:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:38:30 INFO] resetting WatchDogTimer
[Status 02:38:30 INFO] Starting Set [AERI set: name W49, 6 scans, 0 angle, D16300 command]
[Ingest 02:38:30 INFO] Sending XML status message
[Status 02:38:30 INFO] Mirror angle: 0
[Mirror 02:38:30 INFO] rotating to position W
[Status 02:38:30 INFO] .SET file for ACQ96 ready
[Ingest 02:38:30 INFO] Starting acquisition
[Status 02:38:30 INFO] reading housekeeping
[Status 02:38:48 INFO] acquire complete
[Status 02:38:49 INFO] writing housekeeping
[Sequencer 02:38:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:38:49 INFO] incremented W scene to 49 completed views
[Sequencer 02:38:49 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:38:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:38:49 INFO] incremented to [AERI set: name X49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:38:49 INFO] W49.SIG(18)
[sigmove 02:38:49 DEBUG] transformed W49Ma.SPC -> W49MA.SPC
[sigmove 02:38:49 DEBUG] transformed W49Mb.SPC -> W49MB.SPC
[sigmove 02:38:49 DEBUG] transformed W49Mc.SPC -> W49MC.SPC
[sigmove 02:38:49 DEBUG] transformed W49Md.SPC -> W49MD.SPC
[sigmove 02:38:49 DEBUG] transformed W49Me.SPC -> W49ME.SPC
[sigmove 02:38:49 DEBUG] transformed W49Mf.SPC -> W49MF.SPC
[Status 02:38:49 INFO] data for W49 transferred to science data processing
[Tidy 02:38:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:38:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:38:49 INFO] resetting WatchDogTimer
[Status 02:38:49 INFO] Starting Set [AERI set: name X49, 6 scans, 0 angle, D16300 command]
[Ingest 02:38:49 INFO] Sending XML status message
[Status 02:38:49 INFO] Mirror angle: 0
[Mirror 02:38:49 INFO] rotating to position X
[Status 02:38:49 INFO] .SET file for ACQ96 ready
[Ingest 02:38:49 INFO] Starting acquisition
[Status 02:38:50 INFO] reading housekeeping
[Status 02:39:08 INFO] acquire complete
[Status 02:39:08 INFO] writing housekeeping
[Sequencer 02:39:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:39:08 INFO] incremented X scene to 49 completed views
[Sequencer 02:39:08 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:39:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:39:08 INFO] incremented to [AERI set: name Y49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:39:08 INFO] X49.SIG(18)
[sigmove 02:39:08 DEBUG] transformed X49Ma.SPC -> X49MA.SPC
[sigmove 02:39:08 DEBUG] transformed X49Mb.SPC -> X49MB.SPC
[sigmove 02:39:08 DEBUG] transformed X49Mc.SPC -> X49MC.SPC
[sigmove 02:39:08 DEBUG] transformed X49Md.SPC -> X49MD.SPC
[sigmove 02:39:08 DEBUG] transformed X49Me.SPC -> X49ME.SPC
[sigmove 02:39:08 DEBUG] transformed X49Mf.SPC -> X49MF.SPC
[Status 02:39:08 INFO] data for X49 transferred to science data processing
[Tidy 02:39:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:39:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:39:08 INFO] resetting WatchDogTimer
[Status 02:39:08 INFO] Starting Set [AERI set: name Y49, 6 scans, 0 angle, D16300 command]
[Ingest 02:39:08 INFO] Sending XML status message
[Status 02:39:08 INFO] Mirror angle: 0
[Mirror 02:39:08 INFO] rotating to position Y
[Status 02:39:08 INFO] .SET file for ACQ96 ready
[Ingest 02:39:08 INFO] Starting acquisition
[Status 02:39:09 INFO] reading housekeeping
[Status 02:39:27 INFO] acquire complete
[Status 02:39:27 INFO] writing housekeeping
[Sequencer 02:39:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:39:27 INFO] incremented Y scene to 49 completed views
[Sequencer 02:39:27 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:39:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:39:27 INFO] incremented to [AERI set: name Z49, 6 scans, 0 angle, D16300 command] set
[sigmove 02:39:27 INFO] Y49.SIG(18)
[sigmove 02:39:27 DEBUG] transformed Y49Ma.SPC -> Y49MA.SPC
[sigmove 02:39:27 DEBUG] transformed Y49Mb.SPC -> Y49MB.SPC
[sigmove 02:39:27 DEBUG] transformed Y49Mc.SPC -> Y49MC.SPC
[sigmove 02:39:27 DEBUG] transformed Y49Md.SPC -> Y49MD.SPC
[sigmove 02:39:27 DEBUG] transformed Y49Me.SPC -> Y49ME.SPC
[sigmove 02:39:27 DEBUG] transformed Y49Mf.SPC -> Y49MF.SPC
[Status 02:39:27 INFO] data for Y49 transferred to science data processing
[Tidy 02:39:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:39:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:39:27 INFO] resetting WatchDogTimer
[Status 02:39:27 INFO] Starting Set [AERI set: name Z49, 6 scans, 0 angle, D16300 command]
[Ingest 02:39:27 INFO] Sending XML status message
[Status 02:39:27 INFO] Mirror angle: 0
[Mirror 02:39:27 INFO] rotating to position Z
[Status 02:39:27 INFO] .SET file for ACQ96 ready
[Ingest 02:39:28 INFO] Starting acquisition
[Status 02:39:28 INFO] reading housekeeping
[Status 02:39:46 INFO] acquire complete
[Status 02:39:46 INFO] writing housekeeping
[Sequencer 02:39:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:39:46 INFO] incremented Z scene to 49 completed views
[Sequencer 02:39:46 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:39:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:39:46 INFO] incremented to [AERI set: name A50, 6 scans, 120 angle, D28300 command] set
[sigmove 02:39:46 INFO] Z49.SIG(18)
[sigmove 02:39:46 DEBUG] transformed Z49Ma.SPC -> Z49MA.SPC
[sigmove 02:39:46 DEBUG] transformed Z49Mb.SPC -> Z49MB.SPC
[sigmove 02:39:46 DEBUG] transformed Z49Mc.SPC -> Z49MC.SPC
[sigmove 02:39:46 DEBUG] transformed Z49Md.SPC -> Z49MD.SPC
[sigmove 02:39:46 DEBUG] transformed Z49Me.SPC -> Z49ME.SPC
[sigmove 02:39:46 DEBUG] transformed Z49Mf.SPC -> Z49MF.SPC
[Status 02:39:46 INFO] data for Z49 transferred to science data processing
[Tidy 02:39:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:39:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:39:46 INFO] resetting WatchDogTimer
[Status 02:39:46 INFO] Starting Set [AERI set: name A50, 6 scans, 120 angle, D28300 command]
[Ingest 02:39:46 INFO] Sending XML status message
[Status 02:39:46 INFO] Mirror angle: 120
[Mirror 02:39:46 INFO] rotating to position A
[Status 02:39:48 INFO] .SET file for ACQ96 ready
[Ingest 02:39:48 INFO] Starting acquisition
[Status 02:39:48 INFO] reading housekeeping
[Status 02:40:06 INFO] acquire complete
[Status 02:40:06 INFO] writing housekeeping
[Sequencer 02:40:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:40:06 INFO] incremented A scene to 50 completed views
[Sequencer 02:40:06 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:40:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:40:06 INFO] incremented to [AERI set: name H50, 6 scans, 60 angle, D22500 command] set
[sigmove 02:40:06 INFO] A50.SIG(18)
[sigmove 02:40:06 DEBUG] transformed A50Ma.SPC -> A50MA.SPC
[sigmove 02:40:06 DEBUG] transformed A50Mb.SPC -> A50MB.SPC
[sigmove 02:40:06 DEBUG] transformed A50Mc.SPC -> A50MC.SPC
[sigmove 02:40:06 DEBUG] transformed A50Md.SPC -> A50MD.SPC
[sigmove 02:40:06 DEBUG] transformed A50Me.SPC -> A50ME.SPC
[sigmove 02:40:06 DEBUG] transformed A50Mf.SPC -> A50MF.SPC
[Status 02:40:06 INFO] data for A50 transferred to science data processing
[Tidy 02:40:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:40:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:40:06 INFO] resetting WatchDogTimer
[Status 02:40:06 INFO] Starting Set [AERI set: name H50, 6 scans, 60 angle, D22500 command]
[Ingest 02:40:06 INFO] Sending XML status message
[Status 02:40:06 INFO] Mirror angle: 60
[Mirror 02:40:07 INFO] rotating to position H
[Status 02:40:07 INFO] .SET file for ACQ96 ready
[Ingest 02:40:07 INFO] Starting acquisition
[Status 02:40:07 INFO] reading housekeeping
[Status 02:40:25 INFO] acquire complete
[Status 02:40:25 INFO] writing housekeeping
[Sequencer 02:40:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:40:25 INFO] incremented H scene to 50 completed views
[Sequencer 02:40:25 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:40:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:40:25 INFO] incremented to [AERI set: name S50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:40:25 INFO] H50.SIG(18)
[sigmove 02:40:25 DEBUG] transformed H50Ma.SPC -> H50MA.SPC
[sigmove 02:40:25 DEBUG] transformed H50Mb.SPC -> H50MB.SPC
[sigmove 02:40:25 DEBUG] transformed H50Mc.SPC -> H50MC.SPC
[sigmove 02:40:25 DEBUG] transformed H50Md.SPC -> H50MD.SPC
[sigmove 02:40:25 DEBUG] transformed H50Me.SPC -> H50ME.SPC
[sigmove 02:40:25 DEBUG] transformed H50Mf.SPC -> H50MF.SPC
[Status 02:40:25 INFO] data for H50 transferred to science data processing
[Tidy 02:40:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:40:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:40:25 INFO] resetting WatchDogTimer
[Status 02:40:26 INFO] Starting Set [AERI set: name S50, 6 scans, 0 angle, D16300 command]
[Ingest 02:40:26 INFO] Sending XML status message
[Status 02:40:26 INFO] Mirror angle: 0
[Mirror 02:40:26 INFO] rotating to position S
[Status 02:40:26 INFO] .SET file for ACQ96 ready
[Ingest 02:40:26 INFO] Starting acquisition
[Status 02:40:27 INFO] reading housekeeping
[Status 02:40:44 INFO] acquire complete
[Status 02:40:44 INFO] writing housekeeping
[Sequencer 02:40:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:40:45 INFO] incremented S scene to 50 completed views
[Sequencer 02:40:45 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:40:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:40:45 INFO] incremented to [AERI set: name T50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:40:45 INFO] S50.SIG(18)
[sigmove 02:40:45 DEBUG] transformed S50Ma.SPC -> S50MA.SPC
[sigmove 02:40:45 DEBUG] transformed S50Mb.SPC -> S50MB.SPC
[sigmove 02:40:45 DEBUG] transformed S50Mc.SPC -> S50MC.SPC
[sigmove 02:40:45 DEBUG] transformed S50Md.SPC -> S50MD.SPC
[sigmove 02:40:45 DEBUG] transformed S50Me.SPC -> S50ME.SPC
[sigmove 02:40:45 DEBUG] transformed S50Mf.SPC -> S50MF.SPC
[Status 02:40:45 INFO] data for S50 transferred to science data processing
[Tidy 02:40:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:40:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:40:45 INFO] resetting WatchDogTimer
[Status 02:40:45 INFO] Starting Set [AERI set: name T50, 6 scans, 0 angle, D16300 command]
[Ingest 02:40:45 INFO] Sending XML status message
[Status 02:40:45 INFO] Mirror angle: 0
[Mirror 02:40:45 INFO] rotating to position T
[Status 02:40:45 INFO] .SET file for ACQ96 ready
[Ingest 02:40:45 INFO] Starting acquisition
[Status 02:40:46 INFO] reading housekeeping
[Status 02:41:03 INFO] acquire complete
[Status 02:41:04 INFO] writing housekeeping
[Sequencer 02:41:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:41:04 INFO] incremented T scene to 50 completed views
[Sequencer 02:41:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:41:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:41:04 INFO] incremented to [AERI set: name U50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:41:04 INFO] T50.SIG(18)
[sigmove 02:41:04 DEBUG] transformed T50Ma.SPC -> T50MA.SPC
[sigmove 02:41:04 DEBUG] transformed T50Mb.SPC -> T50MB.SPC
[sigmove 02:41:04 DEBUG] transformed T50Mc.SPC -> T50MC.SPC
[sigmove 02:41:04 DEBUG] transformed T50Md.SPC -> T50MD.SPC
[sigmove 02:41:04 DEBUG] transformed T50Me.SPC -> T50ME.SPC
[sigmove 02:41:04 DEBUG] transformed T50Mf.SPC -> T50MF.SPC
[Status 02:41:04 INFO] data for T50 transferred to science data processing
[Tidy 02:41:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:41:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:41:04 INFO] resetting WatchDogTimer
[Status 02:41:04 INFO] Starting Set [AERI set: name U50, 6 scans, 0 angle, D16300 command]
[Ingest 02:41:04 INFO] Sending XML status message
[Status 02:41:04 INFO] Mirror angle: 0
[Mirror 02:41:04 INFO] rotating to position U
[Status 02:41:04 INFO] .SET file for ACQ96 ready
[Ingest 02:41:04 INFO] Starting acquisition
[Status 02:41:04 INFO] reading housekeeping
[Status 02:41:22 INFO] acquire complete
[Status 02:41:23 INFO] writing housekeeping
[Sequencer 02:41:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:41:23 INFO] incremented U scene to 50 completed views
[Sequencer 02:41:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:41:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:41:23 INFO] incremented to [AERI set: name V50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:41:23 INFO] U50.SIG(18)
[sigmove 02:41:23 DEBUG] transformed U50Ma.SPC -> U50MA.SPC
[sigmove 02:41:23 DEBUG] transformed U50Mb.SPC -> U50MB.SPC
[sigmove 02:41:23 DEBUG] transformed U50Mc.SPC -> U50MC.SPC
[sigmove 02:41:23 DEBUG] transformed U50Md.SPC -> U50MD.SPC
[sigmove 02:41:23 DEBUG] transformed U50Me.SPC -> U50ME.SPC
[sigmove 02:41:23 DEBUG] transformed U50Mf.SPC -> U50MF.SPC
[Status 02:41:23 INFO] data for U50 transferred to science data processing
[Tidy 02:41:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:41:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:41:23 INFO] resetting WatchDogTimer
[Status 02:41:23 INFO] Starting Set [AERI set: name V50, 6 scans, 0 angle, D16300 command]
[Ingest 02:41:23 INFO] Sending XML status message
[Status 02:41:23 INFO] Mirror angle: 0
[Mirror 02:41:23 INFO] rotating to position V
[Status 02:41:23 INFO] .SET file for ACQ96 ready
[Ingest 02:41:23 INFO] Starting acquisition
[Status 02:41:23 INFO] reading housekeeping
[Status 02:41:41 INFO] acquire complete
[Status 02:41:42 INFO] writing housekeeping
[Sequencer 02:41:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:41:42 INFO] incremented V scene to 50 completed views
[Sequencer 02:41:42 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:41:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:41:42 INFO] incremented to [AERI set: name W50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:41:42 INFO] V50.SIG(18)
[sigmove 02:41:42 DEBUG] transformed V50Ma.SPC -> V50MA.SPC
[sigmove 02:41:42 DEBUG] transformed V50Mb.SPC -> V50MB.SPC
[sigmove 02:41:42 DEBUG] transformed V50Mc.SPC -> V50MC.SPC
[sigmove 02:41:42 DEBUG] transformed V50Md.SPC -> V50MD.SPC
[sigmove 02:41:42 DEBUG] transformed V50Me.SPC -> V50ME.SPC
[sigmove 02:41:42 DEBUG] transformed V50Mf.SPC -> V50MF.SPC
[Status 02:41:42 INFO] data for V50 transferred to science data processing
[Tidy 02:41:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:41:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:41:42 INFO] resetting WatchDogTimer
[Status 02:41:42 INFO] Starting Set [AERI set: name W50, 6 scans, 0 angle, D16300 command]
[Ingest 02:41:42 INFO] Sending XML status message
[Status 02:41:42 INFO] Mirror angle: 0
[Mirror 02:41:42 INFO] rotating to position W
[Status 02:41:42 INFO] .SET file for ACQ96 ready
[Ingest 02:41:42 INFO] Starting acquisition
[Status 02:41:42 INFO] reading housekeeping
[Status 02:42:00 INFO] acquire complete
[Status 02:42:01 INFO] writing housekeeping
[Sequencer 02:42:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:42:01 INFO] incremented W scene to 50 completed views
[Sequencer 02:42:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:42:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:42:01 INFO] incremented to [AERI set: name X50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:42:01 INFO] W50.SIG(18)
[sigmove 02:42:01 DEBUG] transformed W50Ma.SPC -> W50MA.SPC
[sigmove 02:42:01 DEBUG] transformed W50Mb.SPC -> W50MB.SPC
[sigmove 02:42:01 DEBUG] transformed W50Mc.SPC -> W50MC.SPC
[sigmove 02:42:01 DEBUG] transformed W50Md.SPC -> W50MD.SPC
[sigmove 02:42:01 DEBUG] transformed W50Me.SPC -> W50ME.SPC
[sigmove 02:42:01 DEBUG] transformed W50Mf.SPC -> W50MF.SPC
[Status 02:42:01 INFO] data for W50 transferred to science data processing
[Tidy 02:42:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:42:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:42:01 INFO] resetting WatchDogTimer
[Status 02:42:01 INFO] Starting Set [AERI set: name X50, 6 scans, 0 angle, D16300 command]
[Ingest 02:42:01 INFO] Sending XML status message
[Status 02:42:01 INFO] Mirror angle: 0
[Mirror 02:42:01 INFO] rotating to position X
[Status 02:42:01 INFO] .SET file for ACQ96 ready
[Ingest 02:42:01 INFO] Starting acquisition
[Status 02:42:02 INFO] reading housekeeping
[Status 02:42:20 INFO] acquire complete
[Status 02:42:20 INFO] writing housekeeping
[Sequencer 02:42:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:42:20 INFO] incremented X scene to 50 completed views
[Sequencer 02:42:20 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:42:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:42:20 INFO] incremented to [AERI set: name Y50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:42:20 INFO] X50.SIG(18)
[sigmove 02:42:20 DEBUG] transformed X50Ma.SPC -> X50MA.SPC
[sigmove 02:42:20 DEBUG] transformed X50Mb.SPC -> X50MB.SPC
[sigmove 02:42:20 DEBUG] transformed X50Mc.SPC -> X50MC.SPC
[sigmove 02:42:20 DEBUG] transformed X50Md.SPC -> X50MD.SPC
[sigmove 02:42:20 DEBUG] transformed X50Me.SPC -> X50ME.SPC
[sigmove 02:42:20 DEBUG] transformed X50Mf.SPC -> X50MF.SPC
[Status 02:42:20 INFO] data for X50 transferred to science data processing
[Tidy 02:42:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:42:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:42:20 INFO] resetting WatchDogTimer
[Status 02:42:21 INFO] Starting Set [AERI set: name Y50, 6 scans, 0 angle, D16300 command]
[Ingest 02:42:21 INFO] Sending XML status message
[Status 02:42:21 INFO] Mirror angle: 0
[Mirror 02:42:21 INFO] rotating to position Y
[Status 02:42:21 INFO] .SET file for ACQ96 ready
[Ingest 02:42:21 INFO] Starting acquisition
[Status 02:42:21 INFO] reading housekeeping
[Status 02:42:39 INFO] acquire complete
[Status 02:42:39 INFO] writing housekeeping
[Sequencer 02:42:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:42:39 INFO] incremented Y scene to 50 completed views
[Sequencer 02:42:39 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:42:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:42:39 INFO] incremented to [AERI set: name Z50, 6 scans, 0 angle, D16300 command] set
[sigmove 02:42:39 INFO] Y50.SIG(18)
[sigmove 02:42:39 DEBUG] transformed Y50Ma.SPC -> Y50MA.SPC
[sigmove 02:42:39 DEBUG] transformed Y50Mb.SPC -> Y50MB.SPC
[sigmove 02:42:39 DEBUG] transformed Y50Mc.SPC -> Y50MC.SPC
[sigmove 02:42:39 DEBUG] transformed Y50Md.SPC -> Y50MD.SPC
[sigmove 02:42:39 DEBUG] transformed Y50Me.SPC -> Y50ME.SPC
[sigmove 02:42:39 DEBUG] transformed Y50Mf.SPC -> Y50MF.SPC
[Status 02:42:39 INFO] data for Y50 transferred to science data processing
[Tidy 02:42:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:42:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:42:39 INFO] resetting WatchDogTimer
[Status 02:42:39 INFO] Starting Set [AERI set: name Z50, 6 scans, 0 angle, D16300 command]
[Ingest 02:42:39 INFO] Sending XML status message
[Status 02:42:39 INFO] Mirror angle: 0
[Mirror 02:42:39 INFO] rotating to position Z
[Status 02:42:39 INFO] .SET file for ACQ96 ready
[Ingest 02:42:40 INFO] Starting acquisition
[Status 02:42:40 INFO] reading housekeeping
[Status 02:42:58 INFO] acquire complete
[Status 02:42:58 INFO] writing housekeeping
[Sequencer 02:42:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:42:58 INFO] incremented Z scene to 50 completed views
[Sequencer 02:42:58 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:42:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:42:58 INFO] incremented to [AERI set: name H51, 6 scans, 60 angle, D22500 command] set
[sigmove 02:42:58 INFO] Z50.SIG(18)
[sigmove 02:42:58 DEBUG] transformed Z50Ma.SPC -> Z50MA.SPC
[sigmove 02:42:58 DEBUG] transformed Z50Mb.SPC -> Z50MB.SPC
[sigmove 02:42:58 DEBUG] transformed Z50Mc.SPC -> Z50MC.SPC
[sigmove 02:42:58 DEBUG] transformed Z50Md.SPC -> Z50MD.SPC
[sigmove 02:42:58 DEBUG] transformed Z50Me.SPC -> Z50ME.SPC
[sigmove 02:42:58 DEBUG] transformed Z50Mf.SPC -> Z50MF.SPC
[Status 02:42:58 INFO] data for Z50 transferred to science data processing
[Tidy 02:42:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:42:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:42:58 INFO] resetting WatchDogTimer
[Status 02:42:58 INFO] Starting Set [AERI set: name H51, 6 scans, 60 angle, D22500 command]
[Ingest 02:42:58 INFO] Sending XML status message
[Status 02:42:58 INFO] Mirror angle: 60
[Mirror 02:42:58 INFO] rotating to position H
[Status 02:42:59 INFO] .SET file for ACQ96 ready
[Ingest 02:42:59 INFO] Starting acquisition
[Status 02:42:59 INFO] reading housekeeping
[Status 02:43:17 INFO] acquire complete
[Status 02:43:17 INFO] writing housekeeping
[Sequencer 02:43:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:43:17 INFO] incremented H scene to 51 completed views
[Sequencer 02:43:17 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:43:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:43:17 INFO] incremented to [AERI set: name A51, 6 scans, 120 angle, D28300 command] set
[sigmove 02:43:17 INFO] H51.SIG(18)
[sigmove 02:43:17 DEBUG] transformed H51Ma.SPC -> H51MA.SPC
[sigmove 02:43:17 DEBUG] transformed H51Mb.SPC -> H51MB.SPC
[sigmove 02:43:17 DEBUG] transformed H51Mc.SPC -> H51MC.SPC
[sigmove 02:43:17 DEBUG] transformed H51Md.SPC -> H51MD.SPC
[sigmove 02:43:17 DEBUG] transformed H51Me.SPC -> H51ME.SPC
[sigmove 02:43:17 DEBUG] transformed H51Mf.SPC -> H51MF.SPC
[Status 02:43:17 INFO] data for H51 transferred to science data processing
[Tidy 02:43:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:43:17 INFO] A49.FIN(19),H49.FIN(19),S49.FIN(19),T49.FIN(19),U49.FIN(19),V49.FIN(19),W49.FIN(19),X49.FIN(19),Y49.FIN(19),Z49.FIN(19),A50.FIN(19),H50.FIN(19),S50.FIN(19),T50.FIN(19),U50.FIN(19),V50.FIN(19),W50.FIN(19),X50.FIN(19),Y50.FIN(19),Z50.FIN(19)
[sigmove 02:43:17 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:43:17 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:43:18 DEBUG] done zipping
[WatchDog 02:43:18 INFO] resetting WatchDogTimer
[Status 02:43:19 INFO] Starting Set [AERI set: name A51, 6 scans, 120 angle, D28300 command]
[Ingest 02:43:19 INFO] Sending XML status message
[Status 02:43:19 INFO] Mirror angle: 120
[Mirror 02:43:19 INFO] rotating to position A
[Status 02:43:19 INFO] .SET file for ACQ96 ready
[Ingest 02:43:20 INFO] Starting acquisition
[Status 02:43:20 INFO] reading housekeeping
[Status 02:43:37 INFO] acquire complete
[Status 02:43:37 INFO] writing housekeeping
[Sequencer 02:43:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:43:37 INFO] incremented A scene to 51 completed views
[Sequencer 02:43:37 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:43:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:43:37 INFO] incremented to [AERI set: name S51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:43:37 INFO] A51.SIG(18)
[sigmove 02:43:37 DEBUG] transformed A51Ma.SPC -> A51MA.SPC
[sigmove 02:43:37 DEBUG] transformed A51Mb.SPC -> A51MB.SPC
[sigmove 02:43:37 DEBUG] transformed A51Mc.SPC -> A51MC.SPC
[sigmove 02:43:37 DEBUG] transformed A51Md.SPC -> A51MD.SPC
[sigmove 02:43:37 DEBUG] transformed A51Me.SPC -> A51ME.SPC
[sigmove 02:43:37 DEBUG] transformed A51Mf.SPC -> A51MF.SPC
[Status 02:43:37 INFO] data for A51 transferred to science data processing
[Tidy 02:43:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:43:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:43:37 INFO] resetting WatchDogTimer
[Status 02:43:38 INFO] Starting Set [AERI set: name S51, 6 scans, 0 angle, D16300 command]
[Ingest 02:43:38 INFO] Sending XML status message
[Status 02:43:38 INFO] Mirror angle: 0
[Mirror 02:43:38 INFO] rotating to position S
[Status 02:43:39 INFO] .SET file for ACQ96 ready
[Ingest 02:43:39 INFO] Starting acquisition
[Status 02:43:39 INFO] reading housekeeping
[Status 02:43:57 INFO] acquire complete
[Status 02:43:58 INFO] writing housekeeping
[Sequencer 02:43:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:43:58 INFO] incremented S scene to 51 completed views
[Sequencer 02:43:58 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:43:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:43:58 INFO] incremented to [AERI set: name T51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:43:58 INFO] S51.SIG(18)
[sigmove 02:43:58 DEBUG] transformed S51Ma.SPC -> S51MA.SPC
[sigmove 02:43:58 DEBUG] transformed S51Mb.SPC -> S51MB.SPC
[sigmove 02:43:58 DEBUG] transformed S51Mc.SPC -> S51MC.SPC
[sigmove 02:43:58 DEBUG] transformed S51Md.SPC -> S51MD.SPC
[sigmove 02:43:58 DEBUG] transformed S51Me.SPC -> S51ME.SPC
[sigmove 02:43:58 DEBUG] transformed S51Mf.SPC -> S51MF.SPC
[Status 02:43:58 INFO] data for S51 transferred to science data processing
[Tidy 02:43:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:43:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:43:58 INFO] resetting WatchDogTimer
[Status 02:43:58 INFO] Starting Set [AERI set: name T51, 6 scans, 0 angle, D16300 command]
[Ingest 02:43:58 INFO] Sending XML status message
[Status 02:43:58 INFO] Mirror angle: 0
[Mirror 02:43:58 INFO] rotating to position T
[Status 02:43:58 INFO] .SET file for ACQ96 ready
[Ingest 02:43:58 INFO] Starting acquisition
[Status 02:43:58 INFO] reading housekeeping
[Status 02:44:16 INFO] acquire complete
[Status 02:44:17 INFO] writing housekeeping
[Sequencer 02:44:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:44:17 INFO] incremented T scene to 51 completed views
[Sequencer 02:44:17 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:44:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:44:17 INFO] incremented to [AERI set: name U51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:44:17 INFO] T51.SIG(18)
[sigmove 02:44:17 DEBUG] transformed T51Ma.SPC -> T51MA.SPC
[sigmove 02:44:17 DEBUG] transformed T51Mb.SPC -> T51MB.SPC
[sigmove 02:44:17 DEBUG] transformed T51Mc.SPC -> T51MC.SPC
[sigmove 02:44:17 DEBUG] transformed T51Md.SPC -> T51MD.SPC
[sigmove 02:44:17 DEBUG] transformed T51Me.SPC -> T51ME.SPC
[sigmove 02:44:17 DEBUG] transformed T51Mf.SPC -> T51MF.SPC
[Status 02:44:17 INFO] data for T51 transferred to science data processing
[Tidy 02:44:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:44:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:44:17 INFO] resetting WatchDogTimer
[Status 02:44:17 INFO] Starting Set [AERI set: name U51, 6 scans, 0 angle, D16300 command]
[Ingest 02:44:17 INFO] Sending XML status message
[Status 02:44:17 INFO] Mirror angle: 0
[Mirror 02:44:17 INFO] rotating to position U
[Status 02:44:17 INFO] .SET file for ACQ96 ready
[Ingest 02:44:18 INFO] Starting acquisition
[Status 02:44:18 INFO] reading housekeeping
[Status 02:44:35 INFO] acquire complete
[Status 02:44:36 INFO] writing housekeeping
[Sequencer 02:44:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:44:36 INFO] incremented U scene to 51 completed views
[Sequencer 02:44:36 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:44:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:44:36 INFO] incremented to [AERI set: name V51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:44:36 INFO] U51.SIG(18)
[sigmove 02:44:36 DEBUG] transformed U51Ma.SPC -> U51MA.SPC
[sigmove 02:44:36 DEBUG] transformed U51Mb.SPC -> U51MB.SPC
[sigmove 02:44:36 DEBUG] transformed U51Mc.SPC -> U51MC.SPC
[sigmove 02:44:36 DEBUG] transformed U51Md.SPC -> U51MD.SPC
[sigmove 02:44:36 DEBUG] transformed U51Me.SPC -> U51ME.SPC
[sigmove 02:44:36 DEBUG] transformed U51Mf.SPC -> U51MF.SPC
[Status 02:44:36 INFO] data for U51 transferred to science data processing
[Tidy 02:44:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:44:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:44:36 INFO] resetting WatchDogTimer
[Status 02:44:36 INFO] Starting Set [AERI set: name V51, 6 scans, 0 angle, D16300 command]
[Ingest 02:44:36 INFO] Sending XML status message
[Status 02:44:36 INFO] Mirror angle: 0
[Mirror 02:44:36 INFO] rotating to position V
[Status 02:44:36 INFO] .SET file for ACQ96 ready
[Ingest 02:44:36 INFO] Starting acquisition
[Status 02:44:36 INFO] reading housekeeping
[Status 02:44:54 INFO] acquire complete
[Status 02:44:55 INFO] writing housekeeping
[Sequencer 02:44:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:44:55 INFO] incremented V scene to 51 completed views
[Sequencer 02:44:55 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:44:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:44:55 INFO] incremented to [AERI set: name W51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:44:55 INFO] V51.SIG(18)
[sigmove 02:44:55 DEBUG] transformed V51Ma.SPC -> V51MA.SPC
[sigmove 02:44:55 DEBUG] transformed V51Mb.SPC -> V51MB.SPC
[sigmove 02:44:55 DEBUG] transformed V51Mc.SPC -> V51MC.SPC
[sigmove 02:44:55 DEBUG] transformed V51Md.SPC -> V51MD.SPC
[sigmove 02:44:55 DEBUG] transformed V51Me.SPC -> V51ME.SPC
[sigmove 02:44:55 DEBUG] transformed V51Mf.SPC -> V51MF.SPC
[Status 02:44:55 INFO] data for V51 transferred to science data processing
[Tidy 02:44:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:44:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:44:55 INFO] resetting WatchDogTimer
[Status 02:44:55 INFO] Starting Set [AERI set: name W51, 6 scans, 0 angle, D16300 command]
[Ingest 02:44:55 INFO] Sending XML status message
[Status 02:44:55 INFO] Mirror angle: 0
[Mirror 02:44:55 INFO] rotating to position W
[Status 02:44:55 INFO] .SET file for ACQ96 ready
[Ingest 02:44:55 INFO] Starting acquisition
[Status 02:44:55 INFO] reading housekeeping
[Status 02:45:14 INFO] acquire complete
[Status 02:45:14 INFO] writing housekeeping
[Sequencer 02:45:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:45:14 INFO] incremented W scene to 51 completed views
[Sequencer 02:45:14 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:45:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:45:14 INFO] incremented to [AERI set: name X51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:45:14 INFO] W51.SIG(18)
[sigmove 02:45:14 DEBUG] transformed W51Ma.SPC -> W51MA.SPC
[sigmove 02:45:14 DEBUG] transformed W51Mb.SPC -> W51MB.SPC
[sigmove 02:45:14 DEBUG] transformed W51Mc.SPC -> W51MC.SPC
[sigmove 02:45:14 DEBUG] transformed W51Md.SPC -> W51MD.SPC
[sigmove 02:45:14 DEBUG] transformed W51Me.SPC -> W51ME.SPC
[sigmove 02:45:14 DEBUG] transformed W51Mf.SPC -> W51MF.SPC
[Status 02:45:14 INFO] data for W51 transferred to science data processing
[Tidy 02:45:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:45:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:45:14 INFO] resetting WatchDogTimer
[Status 02:45:14 INFO] Starting Set [AERI set: name X51, 6 scans, 0 angle, D16300 command]
[Ingest 02:45:14 INFO] Sending XML status message
[Status 02:45:14 INFO] Mirror angle: 0
[Mirror 02:45:14 INFO] rotating to position X
[Status 02:45:14 INFO] .SET file for ACQ96 ready
[Ingest 02:45:14 INFO] Starting acquisition
[Status 02:45:15 INFO] reading housekeeping
[Status 02:45:33 INFO] acquire complete
[Status 02:45:33 INFO] writing housekeeping
[Sequencer 02:45:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:45:33 INFO] incremented X scene to 51 completed views
[Sequencer 02:45:33 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:45:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:45:33 INFO] incremented to [AERI set: name Y51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:45:33 INFO] X51.SIG(18)
[sigmove 02:45:33 DEBUG] transformed X51Ma.SPC -> X51MA.SPC
[sigmove 02:45:33 DEBUG] transformed X51Mb.SPC -> X51MB.SPC
[sigmove 02:45:33 DEBUG] transformed X51Mc.SPC -> X51MC.SPC
[sigmove 02:45:33 DEBUG] transformed X51Md.SPC -> X51MD.SPC
[sigmove 02:45:33 DEBUG] transformed X51Me.SPC -> X51ME.SPC
[sigmove 02:45:33 DEBUG] transformed X51Mf.SPC -> X51MF.SPC
[Status 02:45:33 INFO] data for X51 transferred to science data processing
[Tidy 02:45:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:45:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:45:33 INFO] resetting WatchDogTimer
[Status 02:45:33 INFO] Starting Set [AERI set: name Y51, 6 scans, 0 angle, D16300 command]
[Ingest 02:45:33 INFO] Sending XML status message
[Status 02:45:33 INFO] Mirror angle: 0
[Mirror 02:45:33 INFO] rotating to position Y
[Status 02:45:34 INFO] .SET file for ACQ96 ready
[Ingest 02:45:34 INFO] Starting acquisition
[Status 02:45:34 INFO] reading housekeeping
[Status 02:45:52 INFO] acquire complete
[Status 02:45:52 INFO] writing housekeeping
[Sequencer 02:45:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:45:52 INFO] incremented Y scene to 51 completed views
[Sequencer 02:45:52 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:45:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:45:52 INFO] incremented to [AERI set: name Z51, 6 scans, 0 angle, D16300 command] set
[sigmove 02:45:52 INFO] Y51.SIG(18)
[sigmove 02:45:52 DEBUG] transformed Y51Ma.SPC -> Y51MA.SPC
[sigmove 02:45:52 DEBUG] transformed Y51Mb.SPC -> Y51MB.SPC
[sigmove 02:45:52 DEBUG] transformed Y51Mc.SPC -> Y51MC.SPC
[sigmove 02:45:52 DEBUG] transformed Y51Md.SPC -> Y51MD.SPC
[sigmove 02:45:52 DEBUG] transformed Y51Me.SPC -> Y51ME.SPC
[sigmove 02:45:52 DEBUG] transformed Y51Mf.SPC -> Y51MF.SPC
[Status 02:45:52 INFO] data for Y51 transferred to science data processing
[Tidy 02:45:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:45:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:45:52 INFO] resetting WatchDogTimer
[Status 02:45:52 INFO] Starting Set [AERI set: name Z51, 6 scans, 0 angle, D16300 command]
[Ingest 02:45:52 INFO] Sending XML status message
[Status 02:45:52 INFO] Mirror angle: 0
[Mirror 02:45:52 INFO] rotating to position Z
[Status 02:45:53 INFO] .SET file for ACQ96 ready
[Ingest 02:45:53 INFO] Starting acquisition
[Status 02:45:53 INFO] reading housekeeping
[Status 02:46:11 INFO] acquire complete
[Status 02:46:11 INFO] writing housekeeping
[Sequencer 02:46:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:46:11 INFO] incremented Z scene to 51 completed views
[Sequencer 02:46:11 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:46:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:46:11 INFO] incremented to [AERI set: name A52, 6 scans, 120 angle, D28300 command] set
[sigmove 02:46:11 INFO] Z51.SIG(18)
[sigmove 02:46:11 DEBUG] transformed Z51Ma.SPC -> Z51MA.SPC
[sigmove 02:46:11 DEBUG] transformed Z51Mb.SPC -> Z51MB.SPC
[sigmove 02:46:11 DEBUG] transformed Z51Mc.SPC -> Z51MC.SPC
[sigmove 02:46:11 DEBUG] transformed Z51Md.SPC -> Z51MD.SPC
[sigmove 02:46:11 DEBUG] transformed Z51Me.SPC -> Z51ME.SPC
[sigmove 02:46:11 DEBUG] transformed Z51Mf.SPC -> Z51MF.SPC
[Status 02:46:11 INFO] data for Z51 transferred to science data processing
[Tidy 02:46:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:46:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:46:11 INFO] resetting WatchDogTimer
[Status 02:46:11 INFO] Starting Set [AERI set: name A52, 6 scans, 120 angle, D28300 command]
[Ingest 02:46:11 INFO] Sending XML status message
[Status 02:46:11 INFO] Mirror angle: 120
[Mirror 02:46:11 INFO] rotating to position A
[Status 02:46:13 INFO] .SET file for ACQ96 ready
[Ingest 02:46:13 INFO] Starting acquisition
[Status 02:46:13 INFO] reading housekeeping
[Status 02:46:31 INFO] acquire complete
[Status 02:46:31 INFO] writing housekeeping
[Sequencer 02:46:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:46:31 INFO] incremented A scene to 52 completed views
[Sequencer 02:46:31 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:46:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:46:31 INFO] incremented to [AERI set: name H52, 6 scans, 60 angle, D22500 command] set
[sigmove 02:46:31 INFO] A52.SIG(18)
[sigmove 02:46:31 DEBUG] transformed A52Ma.SPC -> A52MA.SPC
[sigmove 02:46:31 DEBUG] transformed A52Mb.SPC -> A52MB.SPC
[sigmove 02:46:31 DEBUG] transformed A52Mc.SPC -> A52MC.SPC
[sigmove 02:46:31 DEBUG] transformed A52Md.SPC -> A52MD.SPC
[sigmove 02:46:31 DEBUG] transformed A52Me.SPC -> A52ME.SPC
[sigmove 02:46:31 DEBUG] transformed A52Mf.SPC -> A52MF.SPC
[Status 02:46:31 INFO] data for A52 transferred to science data processing
[Tidy 02:46:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:46:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:46:31 INFO] resetting WatchDogTimer
[Status 02:46:32 INFO] Starting Set [AERI set: name H52, 6 scans, 60 angle, D22500 command]
[Ingest 02:46:32 INFO] Sending XML status message
[Status 02:46:32 INFO] Mirror angle: 60
[Mirror 02:46:32 INFO] rotating to position H
[Status 02:46:32 INFO] .SET file for ACQ96 ready
[Ingest 02:46:32 INFO] Starting acquisition
[Status 02:46:33 INFO] reading housekeeping
[Status 02:46:50 INFO] acquire complete
[Status 02:46:51 INFO] writing housekeeping
[Sequencer 02:46:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:46:51 INFO] incremented H scene to 52 completed views
[Sequencer 02:46:51 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:46:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:46:51 INFO] incremented to [AERI set: name S52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:46:51 INFO] H52.SIG(18)
[sigmove 02:46:51 DEBUG] transformed H52Ma.SPC -> H52MA.SPC
[sigmove 02:46:51 DEBUG] transformed H52Mb.SPC -> H52MB.SPC
[sigmove 02:46:51 DEBUG] transformed H52Mc.SPC -> H52MC.SPC
[sigmove 02:46:51 DEBUG] transformed H52Md.SPC -> H52MD.SPC
[sigmove 02:46:51 DEBUG] transformed H52Me.SPC -> H52ME.SPC
[sigmove 02:46:51 DEBUG] transformed H52Mf.SPC -> H52MF.SPC
[Status 02:46:51 INFO] data for H52 transferred to science data processing
[Tidy 02:46:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:46:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:46:51 INFO] resetting WatchDogTimer
[Status 02:46:51 INFO] Starting Set [AERI set: name S52, 6 scans, 0 angle, D16300 command]
[Ingest 02:46:51 INFO] Sending XML status message
[Status 02:46:51 INFO] Mirror angle: 0
[Mirror 02:46:51 INFO] rotating to position S
[Status 02:46:51 INFO] .SET file for ACQ96 ready
[Ingest 02:46:52 INFO] Starting acquisition
[Status 02:46:52 INFO] reading housekeeping
[Status 02:47:09 INFO] acquire complete
[Status 02:47:10 INFO] writing housekeeping
[Sequencer 02:47:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:47:10 INFO] incremented S scene to 52 completed views
[Sequencer 02:47:10 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:47:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:47:10 INFO] incremented to [AERI set: name T52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:47:10 INFO] S52.SIG(18)
[sigmove 02:47:10 DEBUG] transformed S52Ma.SPC -> S52MA.SPC
[sigmove 02:47:10 DEBUG] transformed S52Mb.SPC -> S52MB.SPC
[sigmove 02:47:10 DEBUG] transformed S52Mc.SPC -> S52MC.SPC
[sigmove 02:47:10 DEBUG] transformed S52Md.SPC -> S52MD.SPC
[sigmove 02:47:10 DEBUG] transformed S52Me.SPC -> S52ME.SPC
[sigmove 02:47:10 DEBUG] transformed S52Mf.SPC -> S52MF.SPC
[Status 02:47:10 INFO] data for S52 transferred to science data processing
[Tidy 02:47:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:47:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:47:10 INFO] resetting WatchDogTimer
[Status 02:47:10 INFO] Starting Set [AERI set: name T52, 6 scans, 0 angle, D16300 command]
[Ingest 02:47:10 INFO] Sending XML status message
[Status 02:47:10 INFO] Mirror angle: 0
[Mirror 02:47:10 INFO] rotating to position T
[Status 02:47:10 INFO] .SET file for ACQ96 ready
[Ingest 02:47:10 INFO] Starting acquisition
[Status 02:47:10 INFO] reading housekeeping
[Status 02:47:28 INFO] acquire complete
[Status 02:47:29 INFO] writing housekeeping
[Sequencer 02:47:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:47:29 INFO] incremented T scene to 52 completed views
[Sequencer 02:47:29 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:47:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:47:29 INFO] incremented to [AERI set: name U52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:47:29 INFO] T52.SIG(18)
[sigmove 02:47:29 DEBUG] transformed T52Ma.SPC -> T52MA.SPC
[sigmove 02:47:29 DEBUG] transformed T52Mb.SPC -> T52MB.SPC
[sigmove 02:47:29 DEBUG] transformed T52Mc.SPC -> T52MC.SPC
[sigmove 02:47:29 DEBUG] transformed T52Md.SPC -> T52MD.SPC
[sigmove 02:47:29 DEBUG] transformed T52Me.SPC -> T52ME.SPC
[sigmove 02:47:29 DEBUG] transformed T52Mf.SPC -> T52MF.SPC
[Status 02:47:29 INFO] data for T52 transferred to science data processing
[Tidy 02:47:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:47:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:47:29 INFO] resetting WatchDogTimer
[Status 02:47:29 INFO] Starting Set [AERI set: name U52, 6 scans, 0 angle, D16300 command]
[Ingest 02:47:29 INFO] Sending XML status message
[Status 02:47:29 INFO] Mirror angle: 0
[Mirror 02:47:29 INFO] rotating to position U
[Status 02:47:29 INFO] .SET file for ACQ96 ready
[Ingest 02:47:29 INFO] Starting acquisition
[Status 02:47:29 INFO] reading housekeeping
[Status 02:47:47 INFO] acquire complete
[Status 02:47:48 INFO] writing housekeeping
[Sequencer 02:47:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:47:48 INFO] incremented U scene to 52 completed views
[Sequencer 02:47:48 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:47:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:47:48 INFO] incremented to [AERI set: name V52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:47:48 INFO] U52.SIG(18)
[sigmove 02:47:48 DEBUG] transformed U52Ma.SPC -> U52MA.SPC
[sigmove 02:47:48 DEBUG] transformed U52Mb.SPC -> U52MB.SPC
[sigmove 02:47:48 DEBUG] transformed U52Mc.SPC -> U52MC.SPC
[sigmove 02:47:48 DEBUG] transformed U52Md.SPC -> U52MD.SPC
[sigmove 02:47:48 DEBUG] transformed U52Me.SPC -> U52ME.SPC
[sigmove 02:47:48 DEBUG] transformed U52Mf.SPC -> U52MF.SPC
[Status 02:47:48 INFO] data for U52 transferred to science data processing
[Tidy 02:47:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:47:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:47:48 INFO] resetting WatchDogTimer
[Status 02:47:48 INFO] Starting Set [AERI set: name V52, 6 scans, 0 angle, D16300 command]
[Ingest 02:47:48 INFO] Sending XML status message
[Status 02:47:48 INFO] Mirror angle: 0
[Mirror 02:47:48 INFO] rotating to position V
[Status 02:47:48 INFO] .SET file for ACQ96 ready
[Ingest 02:47:48 INFO] Starting acquisition
[Status 02:47:48 INFO] reading housekeeping
[Status 02:48:06 INFO] acquire complete
[Status 02:48:07 INFO] writing housekeeping
[Sequencer 02:48:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:48:07 INFO] incremented V scene to 52 completed views
[Sequencer 02:48:07 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:48:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:48:07 INFO] incremented to [AERI set: name W52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:48:07 INFO] V52.SIG(18)
[sigmove 02:48:07 DEBUG] transformed V52Ma.SPC -> V52MA.SPC
[sigmove 02:48:07 DEBUG] transformed V52Mb.SPC -> V52MB.SPC
[sigmove 02:48:07 DEBUG] transformed V52Mc.SPC -> V52MC.SPC
[sigmove 02:48:07 DEBUG] transformed V52Md.SPC -> V52MD.SPC
[sigmove 02:48:07 DEBUG] transformed V52Me.SPC -> V52ME.SPC
[sigmove 02:48:07 DEBUG] transformed V52Mf.SPC -> V52MF.SPC
[Status 02:48:07 INFO] data for V52 transferred to science data processing
[Tidy 02:48:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:48:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:48:07 INFO] resetting WatchDogTimer
[Status 02:48:07 INFO] Starting Set [AERI set: name W52, 6 scans, 0 angle, D16300 command]
[Ingest 02:48:07 INFO] Sending XML status message
[Status 02:48:07 INFO] Mirror angle: 0
[Mirror 02:48:07 INFO] rotating to position W
[Status 02:48:07 INFO] .SET file for ACQ96 ready
[Ingest 02:48:07 INFO] Starting acquisition
[Status 02:48:07 INFO] reading housekeeping
[Status 02:48:26 INFO] acquire complete
[Status 02:48:26 INFO] writing housekeeping
[Sequencer 02:48:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:48:26 INFO] incremented W scene to 52 completed views
[Sequencer 02:48:26 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:48:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:48:26 INFO] incremented to [AERI set: name X52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:48:26 INFO] W52.SIG(18)
[sigmove 02:48:26 DEBUG] transformed W52Ma.SPC -> W52MA.SPC
[sigmove 02:48:26 DEBUG] transformed W52Mb.SPC -> W52MB.SPC
[sigmove 02:48:26 DEBUG] transformed W52Mc.SPC -> W52MC.SPC
[sigmove 02:48:26 DEBUG] transformed W52Md.SPC -> W52MD.SPC
[sigmove 02:48:26 DEBUG] transformed W52Me.SPC -> W52ME.SPC
[sigmove 02:48:26 DEBUG] transformed W52Mf.SPC -> W52MF.SPC
[Status 02:48:26 INFO] data for W52 transferred to science data processing
[Tidy 02:48:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:48:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:48:26 INFO] resetting WatchDogTimer
[Status 02:48:26 INFO] Starting Set [AERI set: name X52, 6 scans, 0 angle, D16300 command]
[Ingest 02:48:26 INFO] Sending XML status message
[Status 02:48:26 INFO] Mirror angle: 0
[Mirror 02:48:26 INFO] rotating to position X
[Status 02:48:26 INFO] .SET file for ACQ96 ready
[Ingest 02:48:26 INFO] Starting acquisition
[Status 02:48:27 INFO] reading housekeeping
[Status 02:48:45 INFO] acquire complete
[Status 02:48:45 INFO] writing housekeeping
[Sequencer 02:48:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:48:45 INFO] incremented X scene to 52 completed views
[Sequencer 02:48:45 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:48:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:48:45 INFO] incremented to [AERI set: name Y52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:48:45 INFO] X52.SIG(18)
[sigmove 02:48:45 DEBUG] transformed X52Ma.SPC -> X52MA.SPC
[sigmove 02:48:45 DEBUG] transformed X52Mb.SPC -> X52MB.SPC
[sigmove 02:48:45 DEBUG] transformed X52Mc.SPC -> X52MC.SPC
[sigmove 02:48:45 DEBUG] transformed X52Md.SPC -> X52MD.SPC
[sigmove 02:48:45 DEBUG] transformed X52Me.SPC -> X52ME.SPC
[sigmove 02:48:45 DEBUG] transformed X52Mf.SPC -> X52MF.SPC
[Status 02:48:45 INFO] data for X52 transferred to science data processing
[Tidy 02:48:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:48:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:48:45 INFO] resetting WatchDogTimer
[Status 02:48:45 INFO] Starting Set [AERI set: name Y52, 6 scans, 0 angle, D16300 command]
[Ingest 02:48:45 INFO] Sending XML status message
[Status 02:48:45 INFO] Mirror angle: 0
[Mirror 02:48:45 INFO] rotating to position Y
[Status 02:48:45 INFO] .SET file for ACQ96 ready
[Ingest 02:48:46 INFO] Starting acquisition
[Status 02:48:46 INFO] reading housekeeping
[Status 02:49:04 INFO] acquire complete
[Status 02:49:04 INFO] writing housekeeping
[Sequencer 02:49:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:49:04 INFO] incremented Y scene to 52 completed views
[Sequencer 02:49:04 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:49:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:49:04 INFO] incremented to [AERI set: name Z52, 6 scans, 0 angle, D16300 command] set
[sigmove 02:49:04 INFO] Y52.SIG(18)
[sigmove 02:49:04 DEBUG] transformed Y52Ma.SPC -> Y52MA.SPC
[sigmove 02:49:04 DEBUG] transformed Y52Mb.SPC -> Y52MB.SPC
[sigmove 02:49:04 DEBUG] transformed Y52Mc.SPC -> Y52MC.SPC
[sigmove 02:49:04 DEBUG] transformed Y52Md.SPC -> Y52MD.SPC
[sigmove 02:49:04 DEBUG] transformed Y52Me.SPC -> Y52ME.SPC
[sigmove 02:49:04 DEBUG] transformed Y52Mf.SPC -> Y52MF.SPC
[Status 02:49:04 INFO] data for Y52 transferred to science data processing
[Tidy 02:49:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:49:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:49:04 INFO] resetting WatchDogTimer
[Status 02:49:04 INFO] Starting Set [AERI set: name Z52, 6 scans, 0 angle, D16300 command]
[Ingest 02:49:04 INFO] Sending XML status message
[Status 02:49:04 INFO] Mirror angle: 0
[Mirror 02:49:04 INFO] rotating to position Z
[Status 02:49:05 INFO] .SET file for ACQ96 ready
[Ingest 02:49:05 INFO] Starting acquisition
[Status 02:49:05 INFO] reading housekeeping
[Status 02:49:23 INFO] acquire complete
[Status 02:49:23 INFO] writing housekeeping
[Sequencer 02:49:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:49:23 INFO] incremented Z scene to 52 completed views
[Sequencer 02:49:23 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:49:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:49:23 INFO] incremented to [AERI set: name H53, 6 scans, 60 angle, D22500 command] set
[sigmove 02:49:23 INFO] Z52.SIG(18)
[sigmove 02:49:23 DEBUG] transformed Z52Ma.SPC -> Z52MA.SPC
[sigmove 02:49:23 DEBUG] transformed Z52Mb.SPC -> Z52MB.SPC
[sigmove 02:49:23 DEBUG] transformed Z52Mc.SPC -> Z52MC.SPC
[sigmove 02:49:23 DEBUG] transformed Z52Md.SPC -> Z52MD.SPC
[sigmove 02:49:23 DEBUG] transformed Z52Me.SPC -> Z52ME.SPC
[sigmove 02:49:23 DEBUG] transformed Z52Mf.SPC -> Z52MF.SPC
[Status 02:49:23 INFO] data for Z52 transferred to science data processing
[Tidy 02:49:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:49:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:49:23 INFO] resetting WatchDogTimer
[Status 02:49:23 INFO] Starting Set [AERI set: name H53, 6 scans, 60 angle, D22500 command]
[Ingest 02:49:23 INFO] Sending XML status message
[Status 02:49:23 INFO] Mirror angle: 60
[Mirror 02:49:23 INFO] rotating to position H
[Status 02:49:24 INFO] .SET file for ACQ96 ready
[Ingest 02:49:24 INFO] Starting acquisition
[Status 02:49:24 INFO] reading housekeeping
[Status 02:49:42 INFO] acquire complete
[Status 02:49:42 INFO] writing housekeeping
[Sequencer 02:49:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:49:42 INFO] incremented H scene to 53 completed views
[Sequencer 02:49:42 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:49:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:49:42 INFO] incremented to [AERI set: name A53, 6 scans, 120 angle, D28300 command] set
[sigmove 02:49:42 INFO] H53.SIG(18)
[sigmove 02:49:42 DEBUG] transformed H53Ma.SPC -> H53MA.SPC
[sigmove 02:49:42 DEBUG] transformed H53Mb.SPC -> H53MB.SPC
[sigmove 02:49:42 DEBUG] transformed H53Mc.SPC -> H53MC.SPC
[sigmove 02:49:42 DEBUG] transformed H53Md.SPC -> H53MD.SPC
[sigmove 02:49:42 DEBUG] transformed H53Me.SPC -> H53ME.SPC
[sigmove 02:49:42 DEBUG] transformed H53Mf.SPC -> H53MF.SPC
[Status 02:49:42 INFO] data for H53 transferred to science data processing
[Tidy 02:49:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:49:42 INFO] A51.FIN(19),H51.FIN(19),S51.FIN(19),T51.FIN(19),U51.FIN(19),V51.FIN(19),W51.FIN(19),X51.FIN(19),Y51.FIN(19),Z51.FIN(19),A52.FIN(19),H52.FIN(19),S52.FIN(19),T52.FIN(19),U52.FIN(19),V52.FIN(19),W52.FIN(19),X52.FIN(19),Y52.FIN(19),Z52.FIN(19)
[sigmove 02:49:42 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:49:42 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:49:44 DEBUG] done zipping
[WatchDog 02:49:44 INFO] resetting WatchDogTimer
[Status 02:49:44 INFO] Starting Set [AERI set: name A53, 6 scans, 120 angle, D28300 command]
[Ingest 02:49:44 INFO] Sending XML status message
[Status 02:49:44 INFO] Mirror angle: 120
[Mirror 02:49:44 INFO] rotating to position A
[Status 02:49:45 INFO] .SET file for ACQ96 ready
[Ingest 02:49:45 INFO] Starting acquisition
[Status 02:49:45 INFO] reading housekeeping
[Status 02:50:02 INFO] acquire complete
[Status 02:50:02 INFO] writing housekeeping
[Sequencer 02:50:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:50:02 INFO] incremented A scene to 53 completed views
[Sequencer 02:50:02 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:50:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:50:02 INFO] incremented to [AERI set: name S53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:50:02 INFO] A53.SIG(18)
[sigmove 02:50:03 DEBUG] transformed A53Ma.SPC -> A53MA.SPC
[sigmove 02:50:03 DEBUG] transformed A53Mb.SPC -> A53MB.SPC
[sigmove 02:50:03 DEBUG] transformed A53Mc.SPC -> A53MC.SPC
[sigmove 02:50:03 DEBUG] transformed A53Md.SPC -> A53MD.SPC
[sigmove 02:50:03 DEBUG] transformed A53Me.SPC -> A53ME.SPC
[sigmove 02:50:03 DEBUG] transformed A53Mf.SPC -> A53MF.SPC
[Status 02:50:03 INFO] data for A53 transferred to science data processing
[Tidy 02:50:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:50:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:50:03 INFO] resetting WatchDogTimer
[Status 02:50:03 INFO] Starting Set [AERI set: name S53, 6 scans, 0 angle, D16300 command]
[Ingest 02:50:03 INFO] Sending XML status message
[Status 02:50:03 INFO] Mirror angle: 0
[Mirror 02:50:03 INFO] rotating to position S
[Status 02:50:04 INFO] .SET file for ACQ96 ready
[Ingest 02:50:04 INFO] Starting acquisition
[Status 02:50:04 INFO] reading housekeeping
[Status 02:50:22 INFO] acquire complete
[Status 02:50:23 INFO] writing housekeeping
[Sequencer 02:50:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:50:23 INFO] incremented S scene to 53 completed views
[Sequencer 02:50:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:50:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:50:23 INFO] incremented to [AERI set: name T53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:50:23 INFO] S53.SIG(18)
[sigmove 02:50:23 DEBUG] transformed S53Ma.SPC -> S53MA.SPC
[sigmove 02:50:23 DEBUG] transformed S53Mb.SPC -> S53MB.SPC
[sigmove 02:50:23 DEBUG] transformed S53Mc.SPC -> S53MC.SPC
[sigmove 02:50:23 DEBUG] transformed S53Md.SPC -> S53MD.SPC
[sigmove 02:50:23 DEBUG] transformed S53Me.SPC -> S53ME.SPC
[sigmove 02:50:23 DEBUG] transformed S53Mf.SPC -> S53MF.SPC
[Status 02:50:23 INFO] data for S53 transferred to science data processing
[Tidy 02:50:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:50:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:50:23 INFO] resetting WatchDogTimer
[Status 02:50:23 INFO] Starting Set [AERI set: name T53, 6 scans, 0 angle, D16300 command]
[Ingest 02:50:23 INFO] Sending XML status message
[Status 02:50:23 INFO] Mirror angle: 0
[Mirror 02:50:23 INFO] rotating to position T
[Status 02:50:23 INFO] .SET file for ACQ96 ready
[Ingest 02:50:23 INFO] Starting acquisition
[Status 02:50:23 INFO] reading housekeeping
[Status 02:50:41 INFO] acquire complete
[Status 02:50:42 INFO] writing housekeeping
[Sequencer 02:50:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:50:42 INFO] incremented T scene to 53 completed views
[Sequencer 02:50:42 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:50:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:50:42 INFO] incremented to [AERI set: name U53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:50:42 INFO] T53.SIG(18)
[sigmove 02:50:42 DEBUG] transformed T53Ma.SPC -> T53MA.SPC
[sigmove 02:50:42 DEBUG] transformed T53Mb.SPC -> T53MB.SPC
[sigmove 02:50:42 DEBUG] transformed T53Mc.SPC -> T53MC.SPC
[sigmove 02:50:42 DEBUG] transformed T53Md.SPC -> T53MD.SPC
[sigmove 02:50:42 DEBUG] transformed T53Me.SPC -> T53ME.SPC
[sigmove 02:50:42 DEBUG] transformed T53Mf.SPC -> T53MF.SPC
[Status 02:50:42 INFO] data for T53 transferred to science data processing
[Tidy 02:50:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:50:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:50:42 INFO] resetting WatchDogTimer
[Status 02:50:42 INFO] Starting Set [AERI set: name U53, 6 scans, 0 angle, D16300 command]
[Ingest 02:50:42 INFO] Sending XML status message
[Status 02:50:42 INFO] Mirror angle: 0
[Mirror 02:50:42 INFO] rotating to position U
[Status 02:50:42 INFO] .SET file for ACQ96 ready
[Ingest 02:50:42 INFO] Starting acquisition
[Status 02:50:42 INFO] reading housekeeping
[Status 02:51:00 INFO] acquire complete
[Status 02:51:01 INFO] writing housekeeping
[Sequencer 02:51:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:51:01 INFO] incremented U scene to 53 completed views
[Sequencer 02:51:01 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:51:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:51:01 INFO] incremented to [AERI set: name V53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:51:01 INFO] U53.SIG(18)
[sigmove 02:51:01 DEBUG] transformed U53Ma.SPC -> U53MA.SPC
[sigmove 02:51:01 DEBUG] transformed U53Mb.SPC -> U53MB.SPC
[sigmove 02:51:01 DEBUG] transformed U53Mc.SPC -> U53MC.SPC
[sigmove 02:51:01 DEBUG] transformed U53Md.SPC -> U53MD.SPC
[sigmove 02:51:01 DEBUG] transformed U53Me.SPC -> U53ME.SPC
[sigmove 02:51:01 DEBUG] transformed U53Mf.SPC -> U53MF.SPC
[Status 02:51:01 INFO] data for U53 transferred to science data processing
[Tidy 02:51:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:51:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:51:01 INFO] resetting WatchDogTimer
[Status 02:51:01 INFO] Starting Set [AERI set: name V53, 6 scans, 0 angle, D16300 command]
[Ingest 02:51:01 INFO] Sending XML status message
[Status 02:51:01 INFO] Mirror angle: 0
[Mirror 02:51:01 INFO] rotating to position V
[Status 02:51:01 INFO] .SET file for ACQ96 ready
[Ingest 02:51:01 INFO] Starting acquisition
[Status 02:51:02 INFO] reading housekeeping
[Status 02:51:20 INFO] acquire complete
[Status 02:51:20 INFO] writing housekeeping
[Sequencer 02:51:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:51:20 INFO] incremented V scene to 53 completed views
[Sequencer 02:51:20 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:51:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:51:20 INFO] incremented to [AERI set: name W53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:51:20 INFO] V53.SIG(18)
[sigmove 02:51:20 DEBUG] transformed V53Ma.SPC -> V53MA.SPC
[sigmove 02:51:20 DEBUG] transformed V53Mb.SPC -> V53MB.SPC
[sigmove 02:51:20 DEBUG] transformed V53Mc.SPC -> V53MC.SPC
[sigmove 02:51:20 DEBUG] transformed V53Md.SPC -> V53MD.SPC
[sigmove 02:51:20 DEBUG] transformed V53Me.SPC -> V53ME.SPC
[sigmove 02:51:20 DEBUG] transformed V53Mf.SPC -> V53MF.SPC
[Status 02:51:20 INFO] data for V53 transferred to science data processing
[Tidy 02:51:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:51:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:51:20 INFO] resetting WatchDogTimer
[Status 02:51:20 INFO] Starting Set [AERI set: name W53, 6 scans, 0 angle, D16300 command]
[Ingest 02:51:20 INFO] Sending XML status message
[Status 02:51:20 INFO] Mirror angle: 0
[Mirror 02:51:20 INFO] rotating to position W
[Status 02:51:20 INFO] .SET file for ACQ96 ready
[Ingest 02:51:20 INFO] Starting acquisition
[Status 02:51:21 INFO] reading housekeeping
[Status 02:51:39 INFO] acquire complete
[Status 02:51:39 INFO] writing housekeeping
[Sequencer 02:51:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:51:39 INFO] incremented W scene to 53 completed views
[Sequencer 02:51:39 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:51:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:51:39 INFO] incremented to [AERI set: name X53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:51:39 INFO] W53.SIG(18)
[sigmove 02:51:39 DEBUG] transformed W53Ma.SPC -> W53MA.SPC
[sigmove 02:51:39 DEBUG] transformed W53Mb.SPC -> W53MB.SPC
[sigmove 02:51:39 DEBUG] transformed W53Mc.SPC -> W53MC.SPC
[sigmove 02:51:39 DEBUG] transformed W53Md.SPC -> W53MD.SPC
[sigmove 02:51:39 DEBUG] transformed W53Me.SPC -> W53ME.SPC
[sigmove 02:51:39 DEBUG] transformed W53Mf.SPC -> W53MF.SPC
[Status 02:51:39 INFO] data for W53 transferred to science data processing
[Tidy 02:51:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:51:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:51:39 INFO] resetting WatchDogTimer
[Status 02:51:39 INFO] Starting Set [AERI set: name X53, 6 scans, 0 angle, D16300 command]
[Ingest 02:51:39 INFO] Sending XML status message
[Status 02:51:39 INFO] Mirror angle: 0
[Mirror 02:51:39 INFO] rotating to position X
[Status 02:51:39 INFO] .SET file for ACQ96 ready
[Ingest 02:51:40 INFO] Starting acquisition
[Status 02:51:40 INFO] reading housekeeping
[Status 02:51:58 INFO] acquire complete
[Status 02:51:58 INFO] writing housekeeping
[Sequencer 02:51:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:51:58 INFO] incremented X scene to 53 completed views
[Sequencer 02:51:58 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:51:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:51:58 INFO] incremented to [AERI set: name Y53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:51:58 INFO] X53.SIG(18)
[sigmove 02:51:58 DEBUG] transformed X53Ma.SPC -> X53MA.SPC
[sigmove 02:51:58 DEBUG] transformed X53Mb.SPC -> X53MB.SPC
[sigmove 02:51:58 DEBUG] transformed X53Mc.SPC -> X53MC.SPC
[sigmove 02:51:58 DEBUG] transformed X53Md.SPC -> X53MD.SPC
[sigmove 02:51:58 DEBUG] transformed X53Me.SPC -> X53ME.SPC
[sigmove 02:51:58 DEBUG] transformed X53Mf.SPC -> X53MF.SPC
[Status 02:51:58 INFO] data for X53 transferred to science data processing
[Tidy 02:51:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:51:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:51:58 INFO] resetting WatchDogTimer
[Status 02:51:58 INFO] Starting Set [AERI set: name Y53, 6 scans, 0 angle, D16300 command]
[Ingest 02:51:58 INFO] Sending XML status message
[Status 02:51:58 INFO] Mirror angle: 0
[Mirror 02:51:58 INFO] rotating to position Y
[Status 02:51:59 INFO] .SET file for ACQ96 ready
[Ingest 02:51:59 INFO] Starting acquisition
[Status 02:51:59 INFO] reading housekeeping
[Status 02:52:17 INFO] acquire complete
[Status 02:52:17 INFO] writing housekeeping
[Sequencer 02:52:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:52:17 INFO] incremented Y scene to 53 completed views
[Sequencer 02:52:17 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:52:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:52:17 INFO] incremented to [AERI set: name Z53, 6 scans, 0 angle, D16300 command] set
[sigmove 02:52:17 INFO] Y53.SIG(18)
[sigmove 02:52:17 DEBUG] transformed Y53Ma.SPC -> Y53MA.SPC
[sigmove 02:52:17 DEBUG] transformed Y53Mb.SPC -> Y53MB.SPC
[sigmove 02:52:17 DEBUG] transformed Y53Mc.SPC -> Y53MC.SPC
[sigmove 02:52:17 DEBUG] transformed Y53Md.SPC -> Y53MD.SPC
[sigmove 02:52:17 DEBUG] transformed Y53Me.SPC -> Y53ME.SPC
[sigmove 02:52:17 DEBUG] transformed Y53Mf.SPC -> Y53MF.SPC
[Status 02:52:17 INFO] data for Y53 transferred to science data processing
[Tidy 02:52:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:52:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:52:17 INFO] resetting WatchDogTimer
[Status 02:52:17 INFO] Starting Set [AERI set: name Z53, 6 scans, 0 angle, D16300 command]
[Ingest 02:52:17 INFO] Sending XML status message
[Status 02:52:17 INFO] Mirror angle: 0
[Mirror 02:52:18 INFO] rotating to position Z
[Status 02:52:18 INFO] .SET file for ACQ96 ready
[Ingest 02:52:18 INFO] Starting acquisition
[Status 02:52:18 INFO] reading housekeeping
[Status 02:52:36 INFO] acquire complete
[Status 02:52:36 INFO] writing housekeeping
[Sequencer 02:52:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:52:36 INFO] incremented Z scene to 53 completed views
[Sequencer 02:52:36 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:52:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:52:36 INFO] incremented to [AERI set: name A54, 6 scans, 120 angle, D28300 command] set
[sigmove 02:52:36 INFO] Z53.SIG(18)
[sigmove 02:52:36 DEBUG] transformed Z53Ma.SPC -> Z53MA.SPC
[sigmove 02:52:36 DEBUG] transformed Z53Mb.SPC -> Z53MB.SPC
[sigmove 02:52:36 DEBUG] transformed Z53Mc.SPC -> Z53MC.SPC
[sigmove 02:52:36 DEBUG] transformed Z53Md.SPC -> Z53MD.SPC
[sigmove 02:52:36 DEBUG] transformed Z53Me.SPC -> Z53ME.SPC
[sigmove 02:52:36 DEBUG] transformed Z53Mf.SPC -> Z53MF.SPC
[Status 02:52:36 INFO] data for Z53 transferred to science data processing
[Tidy 02:52:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:52:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:52:36 INFO] resetting WatchDogTimer
[Status 02:52:36 INFO] Starting Set [AERI set: name A54, 6 scans, 120 angle, D28300 command]
[Ingest 02:52:36 INFO] Sending XML status message
[Status 02:52:36 INFO] Mirror angle: 120
[Mirror 02:52:37 INFO] rotating to position A
[Status 02:52:38 INFO] .SET file for ACQ96 ready
[Ingest 02:52:38 INFO] Starting acquisition
[Status 02:52:38 INFO] reading housekeeping
[Status 02:52:56 INFO] acquire complete
[Status 02:52:57 INFO] writing housekeeping
[Sequencer 02:52:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:52:57 INFO] incremented A scene to 54 completed views
[Sequencer 02:52:57 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:52:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:52:57 INFO] incremented to [AERI set: name H54, 6 scans, 60 angle, D22500 command] set
[sigmove 02:52:57 INFO] A54.SIG(18)
[sigmove 02:52:57 DEBUG] transformed A54Ma.SPC -> A54MA.SPC
[sigmove 02:52:57 DEBUG] transformed A54Mb.SPC -> A54MB.SPC
[sigmove 02:52:57 DEBUG] transformed A54Mc.SPC -> A54MC.SPC
[sigmove 02:52:57 DEBUG] transformed A54Md.SPC -> A54MD.SPC
[sigmove 02:52:57 DEBUG] transformed A54Me.SPC -> A54ME.SPC
[sigmove 02:52:57 DEBUG] transformed A54Mf.SPC -> A54MF.SPC
[Status 02:52:57 INFO] data for A54 transferred to science data processing
[Tidy 02:52:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:52:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:52:57 INFO] resetting WatchDogTimer
[Status 02:52:57 INFO] Starting Set [AERI set: name H54, 6 scans, 60 angle, D22500 command]
[Ingest 02:52:57 INFO] Sending XML status message
[Status 02:52:57 INFO] Mirror angle: 60
[Mirror 02:52:57 INFO] rotating to position H
[Status 02:52:57 INFO] .SET file for ACQ96 ready
[Ingest 02:52:58 INFO] Starting acquisition
[Status 02:52:58 INFO] reading housekeeping
[Status 02:53:15 INFO] acquire complete
[Status 02:53:16 INFO] writing housekeeping
[Sequencer 02:53:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:53:16 INFO] incremented H scene to 54 completed views
[Sequencer 02:53:16 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:53:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:53:16 INFO] incremented to [AERI set: name S54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:53:16 INFO] H54.SIG(18)
[sigmove 02:53:16 DEBUG] transformed H54Ma.SPC -> H54MA.SPC
[sigmove 02:53:16 DEBUG] transformed H54Mb.SPC -> H54MB.SPC
[sigmove 02:53:16 DEBUG] transformed H54Mc.SPC -> H54MC.SPC
[sigmove 02:53:16 DEBUG] transformed H54Md.SPC -> H54MD.SPC
[sigmove 02:53:16 DEBUG] transformed H54Me.SPC -> H54ME.SPC
[sigmove 02:53:16 DEBUG] transformed H54Mf.SPC -> H54MF.SPC
[Status 02:53:16 INFO] data for H54 transferred to science data processing
[Tidy 02:53:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:53:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:53:16 INFO] resetting WatchDogTimer
[Status 02:53:16 INFO] Starting Set [AERI set: name S54, 6 scans, 0 angle, D16300 command]
[Ingest 02:53:16 INFO] Sending XML status message
[Status 02:53:16 INFO] Mirror angle: 0
[Mirror 02:53:16 INFO] rotating to position S
[Status 02:53:17 INFO] .SET file for ACQ96 ready
[Ingest 02:53:17 INFO] Starting acquisition
[Status 02:53:17 INFO] reading housekeeping
[Status 02:53:34 INFO] acquire complete
[Status 02:53:35 INFO] writing housekeeping
[Sequencer 02:53:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:53:35 INFO] incremented S scene to 54 completed views
[Sequencer 02:53:35 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:53:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:53:35 INFO] incremented to [AERI set: name T54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:53:35 INFO] S54.SIG(18)
[sigmove 02:53:35 DEBUG] transformed S54Ma.SPC -> S54MA.SPC
[sigmove 02:53:35 DEBUG] transformed S54Mb.SPC -> S54MB.SPC
[sigmove 02:53:35 DEBUG] transformed S54Mc.SPC -> S54MC.SPC
[sigmove 02:53:35 DEBUG] transformed S54Md.SPC -> S54MD.SPC
[sigmove 02:53:35 DEBUG] transformed S54Me.SPC -> S54ME.SPC
[sigmove 02:53:35 DEBUG] transformed S54Mf.SPC -> S54MF.SPC
[Status 02:53:35 INFO] data for S54 transferred to science data processing
[Tidy 02:53:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:53:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:53:35 INFO] resetting WatchDogTimer
[Status 02:53:35 INFO] Starting Set [AERI set: name T54, 6 scans, 0 angle, D16300 command]
[Ingest 02:53:35 INFO] Sending XML status message
[Status 02:53:35 INFO] Mirror angle: 0
[Mirror 02:53:35 INFO] rotating to position T
[Status 02:53:35 INFO] .SET file for ACQ96 ready
[Ingest 02:53:35 INFO] Starting acquisition
[Status 02:53:35 INFO] reading housekeeping
[Status 02:53:53 INFO] acquire complete
[Status 02:53:54 INFO] writing housekeeping
[Sequencer 02:53:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:53:54 INFO] incremented T scene to 54 completed views
[Sequencer 02:53:54 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:53:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:53:54 INFO] incremented to [AERI set: name U54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:53:54 INFO] T54.SIG(18)
[sigmove 02:53:54 DEBUG] transformed T54Ma.SPC -> T54MA.SPC
[sigmove 02:53:54 DEBUG] transformed T54Mb.SPC -> T54MB.SPC
[sigmove 02:53:54 DEBUG] transformed T54Mc.SPC -> T54MC.SPC
[sigmove 02:53:54 DEBUG] transformed T54Md.SPC -> T54MD.SPC
[sigmove 02:53:54 DEBUG] transformed T54Me.SPC -> T54ME.SPC
[sigmove 02:53:54 DEBUG] transformed T54Mf.SPC -> T54MF.SPC
[Status 02:53:54 INFO] data for T54 transferred to science data processing
[Tidy 02:53:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:53:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:53:54 INFO] resetting WatchDogTimer
[Status 02:53:54 INFO] Starting Set [AERI set: name U54, 6 scans, 0 angle, D16300 command]
[Ingest 02:53:54 INFO] Sending XML status message
[Status 02:53:54 INFO] Mirror angle: 0
[Mirror 02:53:54 INFO] rotating to position U
[Status 02:53:54 INFO] .SET file for ACQ96 ready
[Ingest 02:53:54 INFO] Starting acquisition
[Status 02:53:54 INFO] reading housekeeping
[Status 02:54:12 INFO] acquire complete
[Status 02:54:13 INFO] writing housekeeping
[Sequencer 02:54:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:54:13 INFO] incremented U scene to 54 completed views
[Sequencer 02:54:13 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:54:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:54:13 INFO] incremented to [AERI set: name V54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:54:13 INFO] U54.SIG(18)
[sigmove 02:54:13 DEBUG] transformed U54Ma.SPC -> U54MA.SPC
[sigmove 02:54:13 DEBUG] transformed U54Mb.SPC -> U54MB.SPC
[sigmove 02:54:13 DEBUG] transformed U54Mc.SPC -> U54MC.SPC
[sigmove 02:54:13 DEBUG] transformed U54Md.SPC -> U54MD.SPC
[sigmove 02:54:13 DEBUG] transformed U54Me.SPC -> U54ME.SPC
[sigmove 02:54:13 DEBUG] transformed U54Mf.SPC -> U54MF.SPC
[Status 02:54:13 INFO] data for U54 transferred to science data processing
[Tidy 02:54:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:54:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:54:13 INFO] resetting WatchDogTimer
[Status 02:54:13 INFO] Starting Set [AERI set: name V54, 6 scans, 0 angle, D16300 command]
[Ingest 02:54:13 INFO] Sending XML status message
[Status 02:54:13 INFO] Mirror angle: 0
[Mirror 02:54:13 INFO] rotating to position V
[Status 02:54:13 INFO] .SET file for ACQ96 ready
[Ingest 02:54:13 INFO] Starting acquisition
[Status 02:54:14 INFO] reading housekeeping
[Status 02:54:32 INFO] acquire complete
[Status 02:54:32 INFO] writing housekeeping
[Sequencer 02:54:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:54:32 INFO] incremented V scene to 54 completed views
[Sequencer 02:54:32 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:54:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:54:32 INFO] incremented to [AERI set: name W54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:54:32 INFO] V54.SIG(18)
[sigmove 02:54:32 DEBUG] transformed V54Ma.SPC -> V54MA.SPC
[sigmove 02:54:32 DEBUG] transformed V54Mb.SPC -> V54MB.SPC
[sigmove 02:54:32 DEBUG] transformed V54Mc.SPC -> V54MC.SPC
[sigmove 02:54:32 DEBUG] transformed V54Md.SPC -> V54MD.SPC
[sigmove 02:54:32 DEBUG] transformed V54Me.SPC -> V54ME.SPC
[sigmove 02:54:32 DEBUG] transformed V54Mf.SPC -> V54MF.SPC
[Status 02:54:32 INFO] data for V54 transferred to science data processing
[Tidy 02:54:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:54:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:54:32 INFO] resetting WatchDogTimer
[Status 02:54:32 INFO] Starting Set [AERI set: name W54, 6 scans, 0 angle, D16300 command]
[Ingest 02:54:32 INFO] Sending XML status message
[Status 02:54:32 INFO] Mirror angle: 0
[Mirror 02:54:32 INFO] rotating to position W
[Status 02:54:32 INFO] .SET file for ACQ96 ready
[Ingest 02:54:33 INFO] Starting acquisition
[Status 02:54:33 INFO] reading housekeeping
[Status 02:54:51 INFO] acquire complete
[Status 02:54:51 INFO] writing housekeeping
[Sequencer 02:54:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:54:51 INFO] incremented W scene to 54 completed views
[Sequencer 02:54:51 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:54:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:54:51 INFO] incremented to [AERI set: name X54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:54:51 INFO] W54.SIG(18)
[sigmove 02:54:51 DEBUG] transformed W54Ma.SPC -> W54MA.SPC
[sigmove 02:54:51 DEBUG] transformed W54Mb.SPC -> W54MB.SPC
[sigmove 02:54:51 DEBUG] transformed W54Mc.SPC -> W54MC.SPC
[sigmove 02:54:51 DEBUG] transformed W54Md.SPC -> W54MD.SPC
[sigmove 02:54:51 DEBUG] transformed W54Me.SPC -> W54ME.SPC
[sigmove 02:54:51 DEBUG] transformed W54Mf.SPC -> W54MF.SPC
[Status 02:54:51 INFO] data for W54 transferred to science data processing
[Tidy 02:54:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:54:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:54:51 INFO] resetting WatchDogTimer
[Status 02:54:51 INFO] Starting Set [AERI set: name X54, 6 scans, 0 angle, D16300 command]
[Ingest 02:54:51 INFO] Sending XML status message
[Status 02:54:51 INFO] Mirror angle: 0
[Mirror 02:54:51 INFO] rotating to position X
[Status 02:54:51 INFO] .SET file for ACQ96 ready
[Ingest 02:54:52 INFO] Starting acquisition
[Status 02:54:52 INFO] reading housekeeping
[Status 02:55:10 INFO] acquire complete
[Status 02:55:10 INFO] writing housekeeping
[Sequencer 02:55:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:55:10 INFO] incremented X scene to 54 completed views
[Sequencer 02:55:10 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:55:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:55:10 INFO] incremented to [AERI set: name Y54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:55:10 INFO] X54.SIG(18)
[sigmove 02:55:10 DEBUG] transformed X54Ma.SPC -> X54MA.SPC
[sigmove 02:55:10 DEBUG] transformed X54Mb.SPC -> X54MB.SPC
[sigmove 02:55:10 DEBUG] transformed X54Mc.SPC -> X54MC.SPC
[sigmove 02:55:10 DEBUG] transformed X54Md.SPC -> X54MD.SPC
[sigmove 02:55:10 DEBUG] transformed X54Me.SPC -> X54ME.SPC
[sigmove 02:55:10 DEBUG] transformed X54Mf.SPC -> X54MF.SPC
[Status 02:55:10 INFO] data for X54 transferred to science data processing
[Tidy 02:55:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:55:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:55:10 INFO] resetting WatchDogTimer
[Status 02:55:10 INFO] Starting Set [AERI set: name Y54, 6 scans, 0 angle, D16300 command]
[Ingest 02:55:10 INFO] Sending XML status message
[Status 02:55:10 INFO] Mirror angle: 0
[Mirror 02:55:10 INFO] rotating to position Y
[Status 02:55:11 INFO] .SET file for ACQ96 ready
[Ingest 02:55:11 INFO] Starting acquisition
[Status 02:55:11 INFO] reading housekeeping
[Status 02:55:29 INFO] acquire complete
[Status 02:55:29 INFO] writing housekeeping
[Sequencer 02:55:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:55:29 INFO] incremented Y scene to 54 completed views
[Sequencer 02:55:29 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:55:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:55:29 INFO] incremented to [AERI set: name Z54, 6 scans, 0 angle, D16300 command] set
[sigmove 02:55:29 INFO] Y54.SIG(18)
[sigmove 02:55:29 DEBUG] transformed Y54Ma.SPC -> Y54MA.SPC
[sigmove 02:55:29 DEBUG] transformed Y54Mb.SPC -> Y54MB.SPC
[sigmove 02:55:29 DEBUG] transformed Y54Mc.SPC -> Y54MC.SPC
[sigmove 02:55:29 DEBUG] transformed Y54Md.SPC -> Y54MD.SPC
[sigmove 02:55:29 DEBUG] transformed Y54Me.SPC -> Y54ME.SPC
[sigmove 02:55:29 DEBUG] transformed Y54Mf.SPC -> Y54MF.SPC
[Status 02:55:29 INFO] data for Y54 transferred to science data processing
[Tidy 02:55:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:55:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:55:29 INFO] resetting WatchDogTimer
[Status 02:55:29 INFO] Starting Set [AERI set: name Z54, 6 scans, 0 angle, D16300 command]
[Ingest 02:55:29 INFO] Sending XML status message
[Status 02:55:29 INFO] Mirror angle: 0
[Mirror 02:55:29 INFO] rotating to position Z
[Status 02:55:30 INFO] .SET file for ACQ96 ready
[Ingest 02:55:30 INFO] Starting acquisition
[Status 02:55:30 INFO] reading housekeeping
[Status 02:55:48 INFO] acquire complete
[Status 02:55:48 INFO] writing housekeeping
[Sequencer 02:55:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:55:48 INFO] incremented Z scene to 54 completed views
[Sequencer 02:55:48 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:55:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:55:48 INFO] incremented to [AERI set: name H55, 6 scans, 60 angle, D22500 command] set
[sigmove 02:55:48 INFO] Z54.SIG(18)
[sigmove 02:55:48 DEBUG] transformed Z54Ma.SPC -> Z54MA.SPC
[sigmove 02:55:48 DEBUG] transformed Z54Mb.SPC -> Z54MB.SPC
[sigmove 02:55:48 DEBUG] transformed Z54Mc.SPC -> Z54MC.SPC
[sigmove 02:55:48 DEBUG] transformed Z54Md.SPC -> Z54MD.SPC
[sigmove 02:55:48 DEBUG] transformed Z54Me.SPC -> Z54ME.SPC
[sigmove 02:55:48 DEBUG] transformed Z54Mf.SPC -> Z54MF.SPC
[Status 02:55:48 INFO] data for Z54 transferred to science data processing
[Tidy 02:55:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:55:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:55:48 INFO] resetting WatchDogTimer
[Status 02:55:48 INFO] Starting Set [AERI set: name H55, 6 scans, 60 angle, D22500 command]
[Ingest 02:55:48 INFO] Sending XML status message
[Status 02:55:48 INFO] Mirror angle: 60
[Mirror 02:55:49 INFO] rotating to position H
[Status 02:55:49 INFO] .SET file for ACQ96 ready
[Ingest 02:55:49 INFO] Starting acquisition
[Status 02:55:50 INFO] reading housekeeping
[Status 02:56:07 INFO] acquire complete
[Status 02:56:07 INFO] writing housekeeping
[Sequencer 02:56:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:56:07 INFO] incremented H scene to 55 completed views
[Sequencer 02:56:07 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:56:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:56:07 INFO] incremented to [AERI set: name A55, 6 scans, 120 angle, D28300 command] set
[sigmove 02:56:07 INFO] H55.SIG(18)
[sigmove 02:56:07 DEBUG] transformed H55Ma.SPC -> H55MA.SPC
[sigmove 02:56:07 DEBUG] transformed H55Mb.SPC -> H55MB.SPC
[sigmove 02:56:07 DEBUG] transformed H55Mc.SPC -> H55MC.SPC
[sigmove 02:56:07 DEBUG] transformed H55Md.SPC -> H55MD.SPC
[sigmove 02:56:07 DEBUG] transformed H55Me.SPC -> H55ME.SPC
[sigmove 02:56:07 DEBUG] transformed H55Mf.SPC -> H55MF.SPC
[Status 02:56:07 INFO] data for H55 transferred to science data processing
[Tidy 02:56:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:56:07 INFO] A53.FIN(19),H53.FIN(19),S53.FIN(19),T53.FIN(19),U53.FIN(19),V53.FIN(19),W53.FIN(19),X53.FIN(19),Y53.FIN(19),Z53.FIN(19),A54.FIN(19),H54.FIN(19),S54.FIN(19),T54.FIN(19),U54.FIN(19),V54.FIN(19),W54.FIN(19),X54.FIN(19),Y54.FIN(19),Z54.FIN(19)
[sigmove 02:56:07 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:56:07 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 02:56:09 DEBUG] done zipping
[WatchDog 02:56:09 INFO] resetting WatchDogTimer
[Status 02:56:09 INFO] Starting Set [AERI set: name A55, 6 scans, 120 angle, D28300 command]
[Ingest 02:56:09 INFO] Sending XML status message
[Status 02:56:09 INFO] Mirror angle: 120
[Mirror 02:56:09 INFO] rotating to position A
[Status 02:56:10 INFO] .SET file for ACQ96 ready
[Ingest 02:56:10 INFO] Starting acquisition
[Status 02:56:10 INFO] reading housekeeping
[Status 02:56:28 INFO] acquire complete
[Status 02:56:29 INFO] writing housekeeping
[Sequencer 02:56:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:56:29 INFO] incremented A scene to 55 completed views
[Sequencer 02:56:29 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:56:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:56:29 INFO] incremented to [AERI set: name S55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:56:29 INFO] A55.SIG(18)
[sigmove 02:56:29 DEBUG] transformed A55Ma.SPC -> A55MA.SPC
[sigmove 02:56:29 DEBUG] transformed A55Mb.SPC -> A55MB.SPC
[sigmove 02:56:29 DEBUG] transformed A55Mc.SPC -> A55MC.SPC
[sigmove 02:56:29 DEBUG] transformed A55Md.SPC -> A55MD.SPC
[sigmove 02:56:29 DEBUG] transformed A55Me.SPC -> A55ME.SPC
[sigmove 02:56:29 DEBUG] transformed A55Mf.SPC -> A55MF.SPC
[Status 02:56:29 INFO] data for A55 transferred to science data processing
[Tidy 02:56:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:56:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:56:29 INFO] resetting WatchDogTimer
[Status 02:56:29 INFO] Starting Set [AERI set: name S55, 6 scans, 0 angle, D16300 command]
[Ingest 02:56:29 INFO] Sending XML status message
[Status 02:56:29 INFO] Mirror angle: 0
[Mirror 02:56:29 INFO] rotating to position S
[Status 02:56:30 INFO] .SET file for ACQ96 ready
[Ingest 02:56:30 INFO] Starting acquisition
[Status 02:56:30 INFO] reading housekeeping
[Status 02:56:49 INFO] acquire complete
[Status 02:56:49 INFO] writing housekeeping
[Sequencer 02:56:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:56:49 INFO] incremented S scene to 55 completed views
[Sequencer 02:56:49 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:56:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:56:49 INFO] incremented to [AERI set: name T55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:56:49 INFO] S55.SIG(18)
[sigmove 02:56:49 DEBUG] transformed S55Ma.SPC -> S55MA.SPC
[sigmove 02:56:49 DEBUG] transformed S55Mb.SPC -> S55MB.SPC
[sigmove 02:56:49 DEBUG] transformed S55Mc.SPC -> S55MC.SPC
[sigmove 02:56:49 DEBUG] transformed S55Md.SPC -> S55MD.SPC
[sigmove 02:56:49 DEBUG] transformed S55Me.SPC -> S55ME.SPC
[sigmove 02:56:49 DEBUG] transformed S55Mf.SPC -> S55MF.SPC
[Status 02:56:49 INFO] data for S55 transferred to science data processing
[Tidy 02:56:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:56:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:56:49 INFO] resetting WatchDogTimer
[Status 02:56:49 INFO] Starting Set [AERI set: name T55, 6 scans, 0 angle, D16300 command]
[Ingest 02:56:49 INFO] Sending XML status message
[Status 02:56:49 INFO] Mirror angle: 0
[Mirror 02:56:49 INFO] rotating to position T
[Status 02:56:50 INFO] .SET file for ACQ96 ready
[Ingest 02:56:50 INFO] Starting acquisition
[Status 02:56:50 INFO] reading housekeeping
[Status 02:57:08 INFO] acquire complete
[Status 02:57:08 INFO] writing housekeeping
[Sequencer 02:57:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:57:08 INFO] incremented T scene to 55 completed views
[Sequencer 02:57:08 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:57:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:57:08 INFO] incremented to [AERI set: name U55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:57:08 INFO] T55.SIG(18)
[sigmove 02:57:08 DEBUG] transformed T55Ma.SPC -> T55MA.SPC
[sigmove 02:57:08 DEBUG] transformed T55Mb.SPC -> T55MB.SPC
[sigmove 02:57:08 DEBUG] transformed T55Mc.SPC -> T55MC.SPC
[sigmove 02:57:08 DEBUG] transformed T55Md.SPC -> T55MD.SPC
[sigmove 02:57:08 DEBUG] transformed T55Me.SPC -> T55ME.SPC
[sigmove 02:57:08 DEBUG] transformed T55Mf.SPC -> T55MF.SPC
[Status 02:57:08 INFO] data for T55 transferred to science data processing
[Tidy 02:57:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:57:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:57:08 INFO] resetting WatchDogTimer
[Status 02:57:08 INFO] Starting Set [AERI set: name U55, 6 scans, 0 angle, D16300 command]
[Ingest 02:57:08 INFO] Sending XML status message
[Status 02:57:08 INFO] Mirror angle: 0
[Mirror 02:57:08 INFO] rotating to position U
[Status 02:57:09 INFO] .SET file for ACQ96 ready
[Ingest 02:57:09 INFO] Starting acquisition
[Status 02:57:09 INFO] reading housekeeping
[Status 02:57:27 INFO] acquire complete
[Status 02:57:27 INFO] writing housekeeping
[Sequencer 02:57:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:57:27 INFO] incremented U scene to 55 completed views
[Sequencer 02:57:27 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:57:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:57:27 INFO] incremented to [AERI set: name V55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:57:27 INFO] U55.SIG(18)
[sigmove 02:57:27 DEBUG] transformed U55Ma.SPC -> U55MA.SPC
[sigmove 02:57:27 DEBUG] transformed U55Mb.SPC -> U55MB.SPC
[sigmove 02:57:27 DEBUG] transformed U55Mc.SPC -> U55MC.SPC
[sigmove 02:57:27 DEBUG] transformed U55Md.SPC -> U55MD.SPC
[sigmove 02:57:27 DEBUG] transformed U55Me.SPC -> U55ME.SPC
[sigmove 02:57:27 DEBUG] transformed U55Mf.SPC -> U55MF.SPC
[Status 02:57:27 INFO] data for U55 transferred to science data processing
[Tidy 02:57:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:57:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:57:27 INFO] resetting WatchDogTimer
[Status 02:57:27 INFO] Starting Set [AERI set: name V55, 6 scans, 0 angle, D16300 command]
[Ingest 02:57:27 INFO] Sending XML status message
[Status 02:57:27 INFO] Mirror angle: 0
[Mirror 02:57:27 INFO] rotating to position V
[Status 02:57:28 INFO] .SET file for ACQ96 ready
[Ingest 02:57:28 INFO] Starting acquisition
[Status 02:57:28 INFO] reading housekeeping
[Status 02:57:46 INFO] acquire complete
[Status 02:57:46 INFO] writing housekeeping
[Sequencer 02:57:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:57:46 INFO] incremented V scene to 55 completed views
[Sequencer 02:57:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:57:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:57:46 INFO] incremented to [AERI set: name W55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:57:46 INFO] V55.SIG(18)
[sigmove 02:57:46 DEBUG] transformed V55Ma.SPC -> V55MA.SPC
[sigmove 02:57:46 DEBUG] transformed V55Mb.SPC -> V55MB.SPC
[sigmove 02:57:46 DEBUG] transformed V55Mc.SPC -> V55MC.SPC
[sigmove 02:57:46 DEBUG] transformed V55Md.SPC -> V55MD.SPC
[sigmove 02:57:46 DEBUG] transformed V55Me.SPC -> V55ME.SPC
[sigmove 02:57:46 DEBUG] transformed V55Mf.SPC -> V55MF.SPC
[Status 02:57:46 INFO] data for V55 transferred to science data processing
[Tidy 02:57:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:57:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:57:46 INFO] resetting WatchDogTimer
[Status 02:57:46 INFO] Starting Set [AERI set: name W55, 6 scans, 0 angle, D16300 command]
[Ingest 02:57:46 INFO] Sending XML status message
[Status 02:57:46 INFO] Mirror angle: 0
[Mirror 02:57:46 INFO] rotating to position W
[Status 02:57:47 INFO] .SET file for ACQ96 ready
[Ingest 02:57:47 INFO] Starting acquisition
[Status 02:57:47 INFO] reading housekeeping
[Status 02:58:05 INFO] acquire complete
[Status 02:58:05 INFO] writing housekeeping
[Sequencer 02:58:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:58:05 INFO] incremented W scene to 55 completed views
[Sequencer 02:58:05 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:58:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:58:05 INFO] incremented to [AERI set: name X55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:58:05 INFO] W55.SIG(18)
[sigmove 02:58:05 DEBUG] transformed W55Ma.SPC -> W55MA.SPC
[sigmove 02:58:05 DEBUG] transformed W55Mb.SPC -> W55MB.SPC
[sigmove 02:58:05 DEBUG] transformed W55Mc.SPC -> W55MC.SPC
[sigmove 02:58:05 DEBUG] transformed W55Md.SPC -> W55MD.SPC
[sigmove 02:58:05 DEBUG] transformed W55Me.SPC -> W55ME.SPC
[sigmove 02:58:05 DEBUG] transformed W55Mf.SPC -> W55MF.SPC
[Status 02:58:05 INFO] data for W55 transferred to science data processing
[Tidy 02:58:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:58:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:58:05 INFO] resetting WatchDogTimer
[Status 02:58:05 INFO] Starting Set [AERI set: name X55, 6 scans, 0 angle, D16300 command]
[Ingest 02:58:05 INFO] Sending XML status message
[Status 02:58:05 INFO] Mirror angle: 0
[Mirror 02:58:06 INFO] rotating to position X
[Status 02:58:06 INFO] .SET file for ACQ96 ready
[Ingest 02:58:06 INFO] Starting acquisition
[Status 02:58:06 INFO] reading housekeeping
[Status 02:58:24 INFO] acquire complete
[Status 02:58:24 INFO] writing housekeeping
[Sequencer 02:58:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:58:24 INFO] incremented X scene to 55 completed views
[Sequencer 02:58:24 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:58:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:58:24 INFO] incremented to [AERI set: name Y55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:58:24 INFO] X55.SIG(18)
[sigmove 02:58:24 DEBUG] transformed X55Ma.SPC -> X55MA.SPC
[sigmove 02:58:24 DEBUG] transformed X55Mb.SPC -> X55MB.SPC
[sigmove 02:58:24 DEBUG] transformed X55Mc.SPC -> X55MC.SPC
[sigmove 02:58:24 DEBUG] transformed X55Md.SPC -> X55MD.SPC
[sigmove 02:58:24 DEBUG] transformed X55Me.SPC -> X55ME.SPC
[sigmove 02:58:24 DEBUG] transformed X55Mf.SPC -> X55MF.SPC
[Status 02:58:24 INFO] data for X55 transferred to science data processing
[Tidy 02:58:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:58:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:58:24 INFO] resetting WatchDogTimer
[Status 02:58:24 INFO] Starting Set [AERI set: name Y55, 6 scans, 0 angle, D16300 command]
[Ingest 02:58:24 INFO] Sending XML status message
[Status 02:58:24 INFO] Mirror angle: 0
[Mirror 02:58:25 INFO] rotating to position Y
[Status 02:58:25 INFO] .SET file for ACQ96 ready
[Ingest 02:58:25 INFO] Starting acquisition
[Status 02:58:25 INFO] reading housekeeping
[Status 02:58:43 INFO] acquire complete
[Status 02:58:43 INFO] writing housekeeping
[Sequencer 02:58:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:58:43 INFO] incremented Y scene to 55 completed views
[Sequencer 02:58:43 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 02:58:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:58:43 INFO] incremented to [AERI set: name Z55, 6 scans, 0 angle, D16300 command] set
[sigmove 02:58:43 INFO] Y55.SIG(18)
[sigmove 02:58:43 DEBUG] transformed Y55Ma.SPC -> Y55MA.SPC
[sigmove 02:58:43 DEBUG] transformed Y55Mb.SPC -> Y55MB.SPC
[sigmove 02:58:43 DEBUG] transformed Y55Mc.SPC -> Y55MC.SPC
[sigmove 02:58:43 DEBUG] transformed Y55Md.SPC -> Y55MD.SPC
[sigmove 02:58:43 DEBUG] transformed Y55Me.SPC -> Y55ME.SPC
[sigmove 02:58:43 DEBUG] transformed Y55Mf.SPC -> Y55MF.SPC
[Status 02:58:43 INFO] data for Y55 transferred to science data processing
[Tidy 02:58:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:58:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:58:43 INFO] resetting WatchDogTimer
[Status 02:58:44 INFO] Starting Set [AERI set: name Z55, 6 scans, 0 angle, D16300 command]
[Ingest 02:58:44 INFO] Sending XML status message
[Status 02:58:44 INFO] Mirror angle: 0
[Mirror 02:58:44 INFO] rotating to position Z
[Status 02:58:44 INFO] .SET file for ACQ96 ready
[Ingest 02:58:44 INFO] Starting acquisition
[Status 02:58:44 INFO] reading housekeeping
[Status 02:59:02 INFO] acquire complete
[Status 02:59:03 INFO] writing housekeeping
[Sequencer 02:59:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:59:03 INFO] incremented Z scene to 55 completed views
[Sequencer 02:59:03 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 02:59:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:59:03 INFO] incremented to [AERI set: name A56, 6 scans, 120 angle, D28300 command] set
[sigmove 02:59:03 INFO] Z55.SIG(18)
[sigmove 02:59:03 DEBUG] transformed Z55Ma.SPC -> Z55MA.SPC
[sigmove 02:59:03 DEBUG] transformed Z55Mb.SPC -> Z55MB.SPC
[sigmove 02:59:03 DEBUG] transformed Z55Mc.SPC -> Z55MC.SPC
[sigmove 02:59:03 DEBUG] transformed Z55Md.SPC -> Z55MD.SPC
[sigmove 02:59:03 DEBUG] transformed Z55Me.SPC -> Z55ME.SPC
[sigmove 02:59:03 DEBUG] transformed Z55Mf.SPC -> Z55MF.SPC
[Status 02:59:03 INFO] data for Z55 transferred to science data processing
[Tidy 02:59:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:59:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:59:03 INFO] resetting WatchDogTimer
[Status 02:59:03 INFO] Starting Set [AERI set: name A56, 6 scans, 120 angle, D28300 command]
[Ingest 02:59:03 INFO] Sending XML status message
[Status 02:59:03 INFO] Mirror angle: 120
[Mirror 02:59:03 INFO] rotating to position A
[Status 02:59:04 INFO] .SET file for ACQ96 ready
[Ingest 02:59:04 INFO] Starting acquisition
[Status 02:59:04 INFO] reading housekeeping
[Status 02:59:22 INFO] acquire complete
[Status 02:59:23 INFO] writing housekeeping
[Sequencer 02:59:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:59:23 INFO] incremented A scene to 56 completed views
[Sequencer 02:59:23 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 02:59:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:59:23 INFO] incremented to [AERI set: name H56, 6 scans, 60 angle, D22500 command] set
[sigmove 02:59:23 INFO] A56.SIG(18)
[sigmove 02:59:23 DEBUG] transformed A56Ma.SPC -> A56MA.SPC
[sigmove 02:59:23 DEBUG] transformed A56Mb.SPC -> A56MB.SPC
[sigmove 02:59:23 DEBUG] transformed A56Mc.SPC -> A56MC.SPC
[sigmove 02:59:23 DEBUG] transformed A56Md.SPC -> A56MD.SPC
[sigmove 02:59:23 DEBUG] transformed A56Me.SPC -> A56ME.SPC
[sigmove 02:59:23 DEBUG] transformed A56Mf.SPC -> A56MF.SPC
[Status 02:59:23 INFO] data for A56 transferred to science data processing
[Tidy 02:59:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:59:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:59:23 INFO] resetting WatchDogTimer
[Status 02:59:23 INFO] Starting Set [AERI set: name H56, 6 scans, 60 angle, D22500 command]
[Ingest 02:59:23 INFO] Sending XML status message
[Status 02:59:23 INFO] Mirror angle: 60
[Mirror 02:59:23 INFO] rotating to position H
[Status 02:59:24 INFO] .SET file for ACQ96 ready
[Ingest 02:59:24 INFO] Starting acquisition
[Status 02:59:24 INFO] reading housekeeping
[Status 02:59:41 INFO] acquire complete
[Status 02:59:42 INFO] writing housekeeping
[Sequencer 02:59:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 02:59:42 INFO] incremented H scene to 56 completed views
[Sequencer 02:59:42 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 02:59:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 02:59:42 INFO] incremented to [AERI set: name S56, 6 scans, 0 angle, D16300 command] set
[sigmove 02:59:42 INFO] H56.SIG(18)
[sigmove 02:59:42 DEBUG] transformed H56Ma.SPC -> H56MA.SPC
[sigmove 02:59:42 DEBUG] transformed H56Mb.SPC -> H56MB.SPC
[sigmove 02:59:42 DEBUG] transformed H56Mc.SPC -> H56MC.SPC
[sigmove 02:59:42 DEBUG] transformed H56Md.SPC -> H56MD.SPC
[sigmove 02:59:42 DEBUG] transformed H56Me.SPC -> H56ME.SPC
[sigmove 02:59:42 DEBUG] transformed H56Mf.SPC -> H56MF.SPC
[Status 02:59:42 INFO] data for H56 transferred to science data processing
[Tidy 02:59:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 02:59:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 02:59:42 INFO] resetting WatchDogTimer
[Status 02:59:42 INFO] Starting Set [AERI set: name S56, 6 scans, 0 angle, D16300 command]
[Ingest 02:59:42 INFO] Sending XML status message
[Status 02:59:42 INFO] Mirror angle: 0
[Mirror 02:59:42 INFO] rotating to position S
[Status 02:59:43 INFO] .SET file for ACQ96 ready
[Ingest 02:59:43 INFO] Starting acquisition
[Status 02:59:43 INFO] reading housekeeping
[Status 03:00:01 INFO] acquire complete
[Status 03:00:01 INFO] writing housekeeping
[Sequencer 03:00:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:00:01 INFO] incremented S scene to 56 completed views
[Sequencer 03:00:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:00:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:00:01 INFO] incremented to [AERI set: name T56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:00:01 INFO] S56.SIG(18)
[sigmove 03:00:01 DEBUG] transformed S56Ma.SPC -> S56MA.SPC
[sigmove 03:00:01 DEBUG] transformed S56Mb.SPC -> S56MB.SPC
[sigmove 03:00:01 DEBUG] transformed S56Mc.SPC -> S56MC.SPC
[sigmove 03:00:01 DEBUG] transformed S56Md.SPC -> S56MD.SPC
[sigmove 03:00:01 DEBUG] transformed S56Me.SPC -> S56ME.SPC
[sigmove 03:00:01 DEBUG] transformed S56Mf.SPC -> S56MF.SPC
[Status 03:00:01 INFO] data for S56 transferred to science data processing
[Tidy 03:00:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:00:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:00:01 INFO] resetting WatchDogTimer
[Status 03:00:01 INFO] Starting Set [AERI set: name T56, 6 scans, 0 angle, D16300 command]
[Ingest 03:00:01 INFO] Sending XML status message
[Status 03:00:01 INFO] Mirror angle: 0
[Mirror 03:00:01 INFO] rotating to position T
[Status 03:00:01 INFO] .SET file for ACQ96 ready
[Ingest 03:00:01 INFO] Starting acquisition
[Status 03:00:02 INFO] reading housekeeping
[Status 03:00:20 INFO] acquire complete
[Status 03:00:20 INFO] writing housekeeping
[Sequencer 03:00:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:00:20 INFO] incremented T scene to 56 completed views
[Sequencer 03:00:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:00:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:00:20 INFO] incremented to [AERI set: name U56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:00:20 INFO] T56.SIG(18)
[sigmove 03:00:20 DEBUG] transformed T56Ma.SPC -> T56MA.SPC
[sigmove 03:00:20 DEBUG] transformed T56Mb.SPC -> T56MB.SPC
[sigmove 03:00:20 DEBUG] transformed T56Mc.SPC -> T56MC.SPC
[sigmove 03:00:20 DEBUG] transformed T56Md.SPC -> T56MD.SPC
[sigmove 03:00:20 DEBUG] transformed T56Me.SPC -> T56ME.SPC
[sigmove 03:00:20 DEBUG] transformed T56Mf.SPC -> T56MF.SPC
[Status 03:00:20 INFO] data for T56 transferred to science data processing
[Tidy 03:00:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:00:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:00:20 INFO] resetting WatchDogTimer
[Status 03:00:20 INFO] Starting Set [AERI set: name U56, 6 scans, 0 angle, D16300 command]
[Ingest 03:00:20 INFO] Sending XML status message
[Status 03:00:20 INFO] Mirror angle: 0
[Mirror 03:00:20 INFO] rotating to position U
[Status 03:00:20 INFO] .SET file for ACQ96 ready
[Ingest 03:00:21 INFO] Starting acquisition
[Status 03:00:21 INFO] reading housekeeping
[Status 03:00:39 INFO] acquire complete
[Status 03:00:39 INFO] writing housekeeping
[Sequencer 03:00:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:00:39 INFO] incremented U scene to 56 completed views
[Sequencer 03:00:39 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:00:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:00:39 INFO] incremented to [AERI set: name V56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:00:39 INFO] U56.SIG(18)
[sigmove 03:00:39 DEBUG] transformed U56Ma.SPC -> U56MA.SPC
[sigmove 03:00:39 DEBUG] transformed U56Mb.SPC -> U56MB.SPC
[sigmove 03:00:39 DEBUG] transformed U56Mc.SPC -> U56MC.SPC
[sigmove 03:00:39 DEBUG] transformed U56Md.SPC -> U56MD.SPC
[sigmove 03:00:39 DEBUG] transformed U56Me.SPC -> U56ME.SPC
[sigmove 03:00:39 DEBUG] transformed U56Mf.SPC -> U56MF.SPC
[Status 03:00:39 INFO] data for U56 transferred to science data processing
[Tidy 03:00:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:00:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:00:39 INFO] resetting WatchDogTimer
[Status 03:00:39 INFO] Starting Set [AERI set: name V56, 6 scans, 0 angle, D16300 command]
[Ingest 03:00:39 INFO] Sending XML status message
[Status 03:00:39 INFO] Mirror angle: 0
[Mirror 03:00:39 INFO] rotating to position V
[Status 03:00:40 INFO] .SET file for ACQ96 ready
[Ingest 03:00:40 INFO] Starting acquisition
[Status 03:00:40 INFO] reading housekeeping
[Status 03:00:58 INFO] acquire complete
[Status 03:00:58 INFO] writing housekeeping
[Sequencer 03:00:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:00:58 INFO] incremented V scene to 56 completed views
[Sequencer 03:00:58 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:00:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:00:58 INFO] incremented to [AERI set: name W56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:00:58 INFO] V56.SIG(18)
[sigmove 03:00:58 DEBUG] transformed V56Ma.SPC -> V56MA.SPC
[sigmove 03:00:58 DEBUG] transformed V56Mb.SPC -> V56MB.SPC
[sigmove 03:00:58 DEBUG] transformed V56Mc.SPC -> V56MC.SPC
[sigmove 03:00:58 DEBUG] transformed V56Md.SPC -> V56MD.SPC
[sigmove 03:00:58 DEBUG] transformed V56Me.SPC -> V56ME.SPC
[sigmove 03:00:58 DEBUG] transformed V56Mf.SPC -> V56MF.SPC
[Status 03:00:58 INFO] data for V56 transferred to science data processing
[Tidy 03:00:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:00:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:00:58 INFO] resetting WatchDogTimer
[Status 03:00:58 INFO] Starting Set [AERI set: name W56, 6 scans, 0 angle, D16300 command]
[Ingest 03:00:58 INFO] Sending XML status message
[Status 03:00:58 INFO] Mirror angle: 0
[Mirror 03:00:58 INFO] rotating to position W
[Status 03:00:59 INFO] .SET file for ACQ96 ready
[Ingest 03:00:59 INFO] Starting acquisition
[Status 03:00:59 INFO] reading housekeeping
[Status 03:01:17 INFO] acquire complete
[Status 03:01:17 INFO] writing housekeeping
[Sequencer 03:01:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:01:17 INFO] incremented W scene to 56 completed views
[Sequencer 03:01:17 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:01:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:01:17 INFO] incremented to [AERI set: name X56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:01:17 INFO] W56.SIG(18)
[sigmove 03:01:17 DEBUG] transformed W56Ma.SPC -> W56MA.SPC
[sigmove 03:01:17 DEBUG] transformed W56Mb.SPC -> W56MB.SPC
[sigmove 03:01:17 DEBUG] transformed W56Mc.SPC -> W56MC.SPC
[sigmove 03:01:17 DEBUG] transformed W56Md.SPC -> W56MD.SPC
[sigmove 03:01:17 DEBUG] transformed W56Me.SPC -> W56ME.SPC
[sigmove 03:01:17 DEBUG] transformed W56Mf.SPC -> W56MF.SPC
[Status 03:01:17 INFO] data for W56 transferred to science data processing
[Tidy 03:01:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:01:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:01:17 INFO] resetting WatchDogTimer
[Status 03:01:17 INFO] Starting Set [AERI set: name X56, 6 scans, 0 angle, D16300 command]
[Ingest 03:01:17 INFO] Sending XML status message
[Status 03:01:17 INFO] Mirror angle: 0
[Mirror 03:01:18 INFO] rotating to position X
[Status 03:01:18 INFO] .SET file for ACQ96 ready
[Ingest 03:01:18 INFO] Starting acquisition
[Status 03:01:18 INFO] reading housekeeping
[Status 03:01:36 INFO] acquire complete
[Status 03:01:36 INFO] writing housekeeping
[Sequencer 03:01:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:01:36 INFO] incremented X scene to 56 completed views
[Sequencer 03:01:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:01:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:01:36 INFO] incremented to [AERI set: name Y56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:01:36 INFO] X56.SIG(18)
[sigmove 03:01:36 DEBUG] transformed X56Ma.SPC -> X56MA.SPC
[sigmove 03:01:36 DEBUG] transformed X56Mb.SPC -> X56MB.SPC
[sigmove 03:01:36 DEBUG] transformed X56Mc.SPC -> X56MC.SPC
[sigmove 03:01:36 DEBUG] transformed X56Md.SPC -> X56MD.SPC
[sigmove 03:01:36 DEBUG] transformed X56Me.SPC -> X56ME.SPC
[sigmove 03:01:36 DEBUG] transformed X56Mf.SPC -> X56MF.SPC
[Status 03:01:36 INFO] data for X56 transferred to science data processing
[Tidy 03:01:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:01:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:01:36 INFO] resetting WatchDogTimer
[Status 03:01:37 INFO] Starting Set [AERI set: name Y56, 6 scans, 0 angle, D16300 command]
[Ingest 03:01:37 INFO] Sending XML status message
[Status 03:01:37 INFO] Mirror angle: 0
[Mirror 03:01:37 INFO] rotating to position Y
[Status 03:01:37 INFO] .SET file for ACQ96 ready
[Ingest 03:01:37 INFO] Starting acquisition
[Status 03:01:37 INFO] reading housekeeping
[Status 03:01:55 INFO] acquire complete
[Status 03:01:55 INFO] writing housekeeping
[Sequencer 03:01:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:01:55 INFO] incremented Y scene to 56 completed views
[Sequencer 03:01:55 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:01:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:01:55 INFO] incremented to [AERI set: name Z56, 6 scans, 0 angle, D16300 command] set
[sigmove 03:01:55 INFO] Y56.SIG(18)
[sigmove 03:01:55 DEBUG] transformed Y56Ma.SPC -> Y56MA.SPC
[sigmove 03:01:55 DEBUG] transformed Y56Mb.SPC -> Y56MB.SPC
[sigmove 03:01:55 DEBUG] transformed Y56Mc.SPC -> Y56MC.SPC
[sigmove 03:01:55 DEBUG] transformed Y56Md.SPC -> Y56MD.SPC
[sigmove 03:01:55 DEBUG] transformed Y56Me.SPC -> Y56ME.SPC
[sigmove 03:01:55 DEBUG] transformed Y56Mf.SPC -> Y56MF.SPC
[Status 03:01:55 INFO] data for Y56 transferred to science data processing
[Tidy 03:01:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:01:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:01:55 INFO] resetting WatchDogTimer
[Status 03:01:56 INFO] Starting Set [AERI set: name Z56, 6 scans, 0 angle, D16300 command]
[Ingest 03:01:56 INFO] Sending XML status message
[Status 03:01:56 INFO] Mirror angle: 0
[Mirror 03:01:56 INFO] rotating to position Z
[Status 03:01:56 INFO] .SET file for ACQ96 ready
[Ingest 03:01:56 INFO] Starting acquisition
[Status 03:01:56 INFO] reading housekeeping
[Status 03:02:14 INFO] acquire complete
[Status 03:02:15 INFO] writing housekeeping
[Sequencer 03:02:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:02:15 INFO] incremented Z scene to 56 completed views
[Sequencer 03:02:15 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:02:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:02:15 INFO] incremented to [AERI set: name H57, 6 scans, 60 angle, D22500 command] set
[sigmove 03:02:15 INFO] Z56.SIG(18)
[sigmove 03:02:15 DEBUG] transformed Z56Ma.SPC -> Z56MA.SPC
[sigmove 03:02:15 DEBUG] transformed Z56Mb.SPC -> Z56MB.SPC
[sigmove 03:02:15 DEBUG] transformed Z56Mc.SPC -> Z56MC.SPC
[sigmove 03:02:15 DEBUG] transformed Z56Md.SPC -> Z56MD.SPC
[sigmove 03:02:15 DEBUG] transformed Z56Me.SPC -> Z56ME.SPC
[sigmove 03:02:15 DEBUG] transformed Z56Mf.SPC -> Z56MF.SPC
[Status 03:02:15 INFO] data for Z56 transferred to science data processing
[Tidy 03:02:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:02:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:02:15 INFO] resetting WatchDogTimer
[Status 03:02:15 INFO] Starting Set [AERI set: name H57, 6 scans, 60 angle, D22500 command]
[Ingest 03:02:15 INFO] Sending XML status message
[Status 03:02:15 INFO] Mirror angle: 60
[Mirror 03:02:15 INFO] rotating to position H
[Status 03:02:16 INFO] .SET file for ACQ96 ready
[Ingest 03:02:16 INFO] Starting acquisition
[Status 03:02:16 INFO] reading housekeeping
[Status 03:02:33 INFO] acquire complete
[Status 03:02:34 INFO] writing housekeeping
[Sequencer 03:02:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:02:34 INFO] incremented H scene to 57 completed views
[Sequencer 03:02:34 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:02:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:02:34 INFO] incremented to [AERI set: name A57, 6 scans, 120 angle, D28300 command] set
[sigmove 03:02:34 INFO] H57.SIG(18)
[sigmove 03:02:34 DEBUG] transformed H57Ma.SPC -> H57MA.SPC
[sigmove 03:02:34 DEBUG] transformed H57Mb.SPC -> H57MB.SPC
[sigmove 03:02:34 DEBUG] transformed H57Mc.SPC -> H57MC.SPC
[sigmove 03:02:34 DEBUG] transformed H57Md.SPC -> H57MD.SPC
[sigmove 03:02:34 DEBUG] transformed H57Me.SPC -> H57ME.SPC
[sigmove 03:02:34 DEBUG] transformed H57Mf.SPC -> H57MF.SPC
[Status 03:02:34 INFO] data for H57 transferred to science data processing
[Tidy 03:02:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:02:34 INFO] A55.FIN(19),H55.FIN(19),S55.FIN(19),T55.FIN(19),U55.FIN(19),V55.FIN(19),W55.FIN(19),X55.FIN(19),Y55.FIN(19),Z55.FIN(19),A56.FIN(19),H56.FIN(19),S56.FIN(19),T56.FIN(19),U56.FIN(19),V56.FIN(19),W56.FIN(19),X56.FIN(19),Y56.FIN(19),Z56.FIN(19)
[sigmove 03:02:34 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:02:34 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:02:36 DEBUG] done zipping
[WatchDog 03:02:36 INFO] resetting WatchDogTimer
[Status 03:02:36 INFO] Starting Set [AERI set: name A57, 6 scans, 120 angle, D28300 command]
[Ingest 03:02:36 INFO] Sending XML status message
[Status 03:02:36 INFO] Mirror angle: 120
[Mirror 03:02:36 INFO] rotating to position A
[Status 03:02:37 INFO] .SET file for ACQ96 ready
[Ingest 03:02:37 INFO] Starting acquisition
[Status 03:02:37 INFO] reading housekeeping
[Status 03:02:55 INFO] acquire complete
[Status 03:02:55 INFO] writing housekeeping
[Sequencer 03:02:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:02:55 INFO] incremented A scene to 57 completed views
[Sequencer 03:02:55 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:02:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:02:55 INFO] incremented to [AERI set: name S57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:02:55 INFO] A57.SIG(18)
[sigmove 03:02:55 DEBUG] transformed A57Ma.SPC -> A57MA.SPC
[sigmove 03:02:55 DEBUG] transformed A57Mb.SPC -> A57MB.SPC
[sigmove 03:02:55 DEBUG] transformed A57Mc.SPC -> A57MC.SPC
[sigmove 03:02:55 DEBUG] transformed A57Md.SPC -> A57MD.SPC
[sigmove 03:02:55 DEBUG] transformed A57Me.SPC -> A57ME.SPC
[sigmove 03:02:55 DEBUG] transformed A57Mf.SPC -> A57MF.SPC
[Status 03:02:55 INFO] data for A57 transferred to science data processing
[Tidy 03:02:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:02:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:02:55 INFO] resetting WatchDogTimer
[Status 03:02:55 INFO] Starting Set [AERI set: name S57, 6 scans, 0 angle, D16300 command]
[Ingest 03:02:55 INFO] Sending XML status message
[Status 03:02:55 INFO] Mirror angle: 0
[Mirror 03:02:55 INFO] rotating to position S
[Status 03:02:56 INFO] .SET file for ACQ96 ready
[Ingest 03:02:57 INFO] Starting acquisition
[Status 03:02:57 INFO] reading housekeeping
[Status 03:03:15 INFO] acquire complete
[Status 03:03:15 INFO] writing housekeeping
[Sequencer 03:03:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:03:15 INFO] incremented S scene to 57 completed views
[Sequencer 03:03:15 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:03:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:03:15 INFO] incremented to [AERI set: name T57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:03:15 INFO] S57.SIG(18)
[sigmove 03:03:15 DEBUG] transformed S57Ma.SPC -> S57MA.SPC
[sigmove 03:03:15 DEBUG] transformed S57Mb.SPC -> S57MB.SPC
[sigmove 03:03:15 DEBUG] transformed S57Mc.SPC -> S57MC.SPC
[sigmove 03:03:15 DEBUG] transformed S57Md.SPC -> S57MD.SPC
[sigmove 03:03:15 DEBUG] transformed S57Me.SPC -> S57ME.SPC
[sigmove 03:03:15 DEBUG] transformed S57Mf.SPC -> S57MF.SPC
[Status 03:03:15 INFO] data for S57 transferred to science data processing
[Tidy 03:03:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:03:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:03:15 INFO] resetting WatchDogTimer
[Status 03:03:15 INFO] Starting Set [AERI set: name T57, 6 scans, 0 angle, D16300 command]
[Ingest 03:03:15 INFO] Sending XML status message
[Status 03:03:15 INFO] Mirror angle: 0
[Mirror 03:03:15 INFO] rotating to position T
[Status 03:03:16 INFO] .SET file for ACQ96 ready
[Ingest 03:03:16 INFO] Starting acquisition
[Status 03:03:16 INFO] reading housekeeping
[Status 03:03:34 INFO] acquire complete
[Status 03:03:34 INFO] writing housekeeping
[Sequencer 03:03:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:03:34 INFO] incremented T scene to 57 completed views
[Sequencer 03:03:34 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:03:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:03:34 INFO] incremented to [AERI set: name U57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:03:34 INFO] T57.SIG(18)
[sigmove 03:03:34 DEBUG] transformed T57Ma.SPC -> T57MA.SPC
[sigmove 03:03:34 DEBUG] transformed T57Mb.SPC -> T57MB.SPC
[sigmove 03:03:34 DEBUG] transformed T57Mc.SPC -> T57MC.SPC
[sigmove 03:03:34 DEBUG] transformed T57Md.SPC -> T57MD.SPC
[sigmove 03:03:34 DEBUG] transformed T57Me.SPC -> T57ME.SPC
[sigmove 03:03:34 DEBUG] transformed T57Mf.SPC -> T57MF.SPC
[Status 03:03:34 INFO] data for T57 transferred to science data processing
[Tidy 03:03:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:03:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:03:34 INFO] resetting WatchDogTimer
[Status 03:03:34 INFO] Starting Set [AERI set: name U57, 6 scans, 0 angle, D16300 command]
[Ingest 03:03:34 INFO] Sending XML status message
[Status 03:03:34 INFO] Mirror angle: 0
[Mirror 03:03:35 INFO] rotating to position U
[Status 03:03:35 INFO] .SET file for ACQ96 ready
[Ingest 03:03:35 INFO] Starting acquisition
[Status 03:03:35 INFO] reading housekeeping
[Status 03:03:53 INFO] acquire complete
[Status 03:03:53 INFO] writing housekeeping
[Sequencer 03:03:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:03:53 INFO] incremented U scene to 57 completed views
[Sequencer 03:03:53 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:03:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:03:53 INFO] incremented to [AERI set: name V57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:03:53 INFO] U57.SIG(18)
[sigmove 03:03:53 DEBUG] transformed U57Ma.SPC -> U57MA.SPC
[sigmove 03:03:53 DEBUG] transformed U57Mb.SPC -> U57MB.SPC
[sigmove 03:03:53 DEBUG] transformed U57Mc.SPC -> U57MC.SPC
[sigmove 03:03:53 DEBUG] transformed U57Md.SPC -> U57MD.SPC
[sigmove 03:03:53 DEBUG] transformed U57Me.SPC -> U57ME.SPC
[sigmove 03:03:53 DEBUG] transformed U57Mf.SPC -> U57MF.SPC
[Status 03:03:53 INFO] data for U57 transferred to science data processing
[Tidy 03:03:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:03:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:03:53 INFO] resetting WatchDogTimer
[Status 03:03:53 INFO] Starting Set [AERI set: name V57, 6 scans, 0 angle, D16300 command]
[Ingest 03:03:53 INFO] Sending XML status message
[Status 03:03:53 INFO] Mirror angle: 0
[Mirror 03:03:54 INFO] rotating to position V
[Status 03:03:54 INFO] .SET file for ACQ96 ready
[Ingest 03:03:54 INFO] Starting acquisition
[Status 03:03:54 INFO] reading housekeeping
[Status 03:04:12 INFO] acquire complete
[Status 03:04:12 INFO] writing housekeeping
[Sequencer 03:04:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:04:12 INFO] incremented V scene to 57 completed views
[Sequencer 03:04:12 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:04:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:04:12 INFO] incremented to [AERI set: name W57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:04:12 INFO] V57.SIG(18)
[sigmove 03:04:12 DEBUG] transformed V57Ma.SPC -> V57MA.SPC
[sigmove 03:04:12 DEBUG] transformed V57Mb.SPC -> V57MB.SPC
[sigmove 03:04:12 DEBUG] transformed V57Mc.SPC -> V57MC.SPC
[sigmove 03:04:12 DEBUG] transformed V57Md.SPC -> V57MD.SPC
[sigmove 03:04:12 DEBUG] transformed V57Me.SPC -> V57ME.SPC
[sigmove 03:04:12 DEBUG] transformed V57Mf.SPC -> V57MF.SPC
[Status 03:04:12 INFO] data for V57 transferred to science data processing
[Tidy 03:04:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:04:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:04:12 INFO] resetting WatchDogTimer
[Status 03:04:13 INFO] Starting Set [AERI set: name W57, 6 scans, 0 angle, D16300 command]
[Ingest 03:04:13 INFO] Sending XML status message
[Status 03:04:13 INFO] Mirror angle: 0
[Mirror 03:04:13 INFO] rotating to position W
[Status 03:04:13 INFO] .SET file for ACQ96 ready
[Ingest 03:04:13 INFO] Starting acquisition
[Status 03:04:13 INFO] reading housekeeping
[Status 03:04:31 INFO] acquire complete
[Status 03:04:31 INFO] writing housekeeping
[Sequencer 03:04:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:04:32 INFO] incremented W scene to 57 completed views
[Sequencer 03:04:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:04:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:04:32 INFO] incremented to [AERI set: name X57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:04:32 INFO] W57.SIG(18)
[sigmove 03:04:32 DEBUG] transformed W57Ma.SPC -> W57MA.SPC
[sigmove 03:04:32 DEBUG] transformed W57Mb.SPC -> W57MB.SPC
[sigmove 03:04:32 DEBUG] transformed W57Mc.SPC -> W57MC.SPC
[sigmove 03:04:32 DEBUG] transformed W57Md.SPC -> W57MD.SPC
[sigmove 03:04:32 DEBUG] transformed W57Me.SPC -> W57ME.SPC
[sigmove 03:04:32 DEBUG] transformed W57Mf.SPC -> W57MF.SPC
[Status 03:04:32 INFO] data for W57 transferred to science data processing
[Tidy 03:04:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:04:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:04:32 INFO] resetting WatchDogTimer
[Status 03:04:32 INFO] Starting Set [AERI set: name X57, 6 scans, 0 angle, D16300 command]
[Ingest 03:04:32 INFO] Sending XML status message
[Status 03:04:32 INFO] Mirror angle: 0
[Mirror 03:04:32 INFO] rotating to position X
[Status 03:04:32 INFO] .SET file for ACQ96 ready
[Ingest 03:04:32 INFO] Starting acquisition
[Status 03:04:32 INFO] reading housekeeping
[Status 03:04:50 INFO] acquire complete
[Status 03:04:51 INFO] writing housekeeping
[Sequencer 03:04:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:04:51 INFO] incremented X scene to 57 completed views
[Sequencer 03:04:51 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:04:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:04:51 INFO] incremented to [AERI set: name Y57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:04:51 INFO] X57.SIG(18)
[sigmove 03:04:51 DEBUG] transformed X57Ma.SPC -> X57MA.SPC
[sigmove 03:04:51 DEBUG] transformed X57Mb.SPC -> X57MB.SPC
[sigmove 03:04:51 DEBUG] transformed X57Mc.SPC -> X57MC.SPC
[sigmove 03:04:51 DEBUG] transformed X57Md.SPC -> X57MD.SPC
[sigmove 03:04:51 DEBUG] transformed X57Me.SPC -> X57ME.SPC
[sigmove 03:04:51 DEBUG] transformed X57Mf.SPC -> X57MF.SPC
[Status 03:04:51 INFO] data for X57 transferred to science data processing
[Tidy 03:04:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:04:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:04:51 INFO] resetting WatchDogTimer
[Status 03:04:51 INFO] Starting Set [AERI set: name Y57, 6 scans, 0 angle, D16300 command]
[Ingest 03:04:51 INFO] Sending XML status message
[Status 03:04:51 INFO] Mirror angle: 0
[Mirror 03:04:51 INFO] rotating to position Y
[Status 03:04:51 INFO] .SET file for ACQ96 ready
[Ingest 03:04:51 INFO] Starting acquisition
[Status 03:04:51 INFO] reading housekeeping
[Status 03:05:09 INFO] acquire complete
[Status 03:05:10 INFO] writing housekeeping
[Sequencer 03:05:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:05:10 INFO] incremented Y scene to 57 completed views
[Sequencer 03:05:10 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:05:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:05:10 INFO] incremented to [AERI set: name Z57, 6 scans, 0 angle, D16300 command] set
[sigmove 03:05:10 INFO] Y57.SIG(18)
[sigmove 03:05:10 DEBUG] transformed Y57Ma.SPC -> Y57MA.SPC
[sigmove 03:05:10 DEBUG] transformed Y57Mb.SPC -> Y57MB.SPC
[sigmove 03:05:10 DEBUG] transformed Y57Mc.SPC -> Y57MC.SPC
[sigmove 03:05:10 DEBUG] transformed Y57Md.SPC -> Y57MD.SPC
[sigmove 03:05:10 DEBUG] transformed Y57Me.SPC -> Y57ME.SPC
[sigmove 03:05:10 DEBUG] transformed Y57Mf.SPC -> Y57MF.SPC
[Status 03:05:10 INFO] data for Y57 transferred to science data processing
[Tidy 03:05:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:05:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:05:10 INFO] resetting WatchDogTimer
[Status 03:05:10 INFO] Starting Set [AERI set: name Z57, 6 scans, 0 angle, D16300 command]
[Ingest 03:05:10 INFO] Sending XML status message
[Status 03:05:10 INFO] Mirror angle: 0
[Mirror 03:05:10 INFO] rotating to position Z
[Status 03:05:10 INFO] .SET file for ACQ96 ready
[Ingest 03:05:10 INFO] Starting acquisition
[Status 03:05:10 INFO] reading housekeeping
[Status 03:05:28 INFO] acquire complete
[Status 03:05:29 INFO] writing housekeeping
[Sequencer 03:05:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:05:29 INFO] incremented Z scene to 57 completed views
[Sequencer 03:05:29 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:05:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:05:29 INFO] incremented to [AERI set: name A58, 6 scans, 120 angle, D28300 command] set
[sigmove 03:05:29 INFO] Z57.SIG(18)
[sigmove 03:05:29 DEBUG] transformed Z57Ma.SPC -> Z57MA.SPC
[sigmove 03:05:29 DEBUG] transformed Z57Mb.SPC -> Z57MB.SPC
[sigmove 03:05:29 DEBUG] transformed Z57Mc.SPC -> Z57MC.SPC
[sigmove 03:05:29 DEBUG] transformed Z57Md.SPC -> Z57MD.SPC
[sigmove 03:05:29 DEBUG] transformed Z57Me.SPC -> Z57ME.SPC
[sigmove 03:05:29 DEBUG] transformed Z57Mf.SPC -> Z57MF.SPC
[Status 03:05:29 INFO] data for Z57 transferred to science data processing
[Tidy 03:05:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:05:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:05:29 INFO] resetting WatchDogTimer
[Status 03:05:29 INFO] Starting Set [AERI set: name A58, 6 scans, 120 angle, D28300 command]
[Ingest 03:05:29 INFO] Sending XML status message
[Status 03:05:29 INFO] Mirror angle: 120
[Mirror 03:05:29 INFO] rotating to position A
[Status 03:05:30 INFO] .SET file for ACQ96 ready
[Ingest 03:05:30 INFO] Starting acquisition
[Status 03:05:31 INFO] reading housekeeping
[Status 03:05:49 INFO] acquire complete
[Status 03:05:49 INFO] writing housekeeping
[Sequencer 03:05:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:05:49 INFO] incremented A scene to 58 completed views
[Sequencer 03:05:49 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:05:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:05:49 INFO] incremented to [AERI set: name H58, 6 scans, 60 angle, D22500 command] set
[sigmove 03:05:49 INFO] A58.SIG(18)
[sigmove 03:05:49 DEBUG] transformed A58Ma.SPC -> A58MA.SPC
[sigmove 03:05:49 DEBUG] transformed A58Mb.SPC -> A58MB.SPC
[sigmove 03:05:49 DEBUG] transformed A58Mc.SPC -> A58MC.SPC
[sigmove 03:05:49 DEBUG] transformed A58Md.SPC -> A58MD.SPC
[sigmove 03:05:49 DEBUG] transformed A58Me.SPC -> A58ME.SPC
[sigmove 03:05:49 DEBUG] transformed A58Mf.SPC -> A58MF.SPC
[Status 03:05:49 INFO] data for A58 transferred to science data processing
[Tidy 03:05:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:05:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:05:49 INFO] resetting WatchDogTimer
[Status 03:05:49 INFO] Starting Set [AERI set: name H58, 6 scans, 60 angle, D22500 command]
[Ingest 03:05:49 INFO] Sending XML status message
[Status 03:05:49 INFO] Mirror angle: 60
[Mirror 03:05:49 INFO] rotating to position H
[Status 03:05:50 INFO] .SET file for ACQ96 ready
[Ingest 03:05:50 INFO] Starting acquisition
[Status 03:05:50 INFO] reading housekeeping
[Status 03:06:08 INFO] acquire complete
[Status 03:06:08 INFO] writing housekeeping
[Sequencer 03:06:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:06:08 INFO] incremented H scene to 58 completed views
[Sequencer 03:06:08 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:06:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:06:08 INFO] incremented to [AERI set: name S58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:06:08 INFO] H58.SIG(18)
[sigmove 03:06:08 DEBUG] transformed H58Ma.SPC -> H58MA.SPC
[sigmove 03:06:08 DEBUG] transformed H58Mb.SPC -> H58MB.SPC
[sigmove 03:06:08 DEBUG] transformed H58Mc.SPC -> H58MC.SPC
[sigmove 03:06:08 DEBUG] transformed H58Md.SPC -> H58MD.SPC
[sigmove 03:06:08 DEBUG] transformed H58Me.SPC -> H58ME.SPC
[sigmove 03:06:08 DEBUG] transformed H58Mf.SPC -> H58MF.SPC
[Status 03:06:08 INFO] data for H58 transferred to science data processing
[Tidy 03:06:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:06:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:06:08 INFO] resetting WatchDogTimer
[Status 03:06:08 INFO] Starting Set [AERI set: name S58, 6 scans, 0 angle, D16300 command]
[Ingest 03:06:08 INFO] Sending XML status message
[Status 03:06:08 INFO] Mirror angle: 0
[Mirror 03:06:08 INFO] rotating to position S
[Status 03:06:09 INFO] .SET file for ACQ96 ready
[Ingest 03:06:09 INFO] Starting acquisition
[Status 03:06:09 INFO] reading housekeeping
[Status 03:06:27 INFO] acquire complete
[Status 03:06:27 INFO] writing housekeeping
[Sequencer 03:06:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:06:27 INFO] incremented S scene to 58 completed views
[Sequencer 03:06:27 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:06:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:06:27 INFO] incremented to [AERI set: name T58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:06:27 INFO] S58.SIG(18)
[sigmove 03:06:27 DEBUG] transformed S58Ma.SPC -> S58MA.SPC
[sigmove 03:06:27 DEBUG] transformed S58Mb.SPC -> S58MB.SPC
[sigmove 03:06:27 DEBUG] transformed S58Mc.SPC -> S58MC.SPC
[sigmove 03:06:27 DEBUG] transformed S58Md.SPC -> S58MD.SPC
[sigmove 03:06:27 DEBUG] transformed S58Me.SPC -> S58ME.SPC
[sigmove 03:06:27 DEBUG] transformed S58Mf.SPC -> S58MF.SPC
[Status 03:06:27 INFO] data for S58 transferred to science data processing
[Tidy 03:06:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:06:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:06:27 INFO] resetting WatchDogTimer
[Status 03:06:27 INFO] Starting Set [AERI set: name T58, 6 scans, 0 angle, D16300 command]
[Ingest 03:06:27 INFO] Sending XML status message
[Status 03:06:27 INFO] Mirror angle: 0
[Mirror 03:06:27 INFO] rotating to position T
[Status 03:06:28 INFO] .SET file for ACQ96 ready
[Ingest 03:06:28 INFO] Starting acquisition
[Status 03:06:28 INFO] reading housekeeping
[Status 03:06:46 INFO] acquire complete
[Status 03:06:46 INFO] writing housekeeping
[Sequencer 03:06:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:06:46 INFO] incremented T scene to 58 completed views
[Sequencer 03:06:46 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:06:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:06:46 INFO] incremented to [AERI set: name U58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:06:46 INFO] T58.SIG(18)
[sigmove 03:06:46 DEBUG] transformed T58Ma.SPC -> T58MA.SPC
[sigmove 03:06:46 DEBUG] transformed T58Mb.SPC -> T58MB.SPC
[sigmove 03:06:46 DEBUG] transformed T58Mc.SPC -> T58MC.SPC
[sigmove 03:06:46 DEBUG] transformed T58Md.SPC -> T58MD.SPC
[sigmove 03:06:46 DEBUG] transformed T58Me.SPC -> T58ME.SPC
[sigmove 03:06:46 DEBUG] transformed T58Mf.SPC -> T58MF.SPC
[Status 03:06:46 INFO] data for T58 transferred to science data processing
[Tidy 03:06:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:06:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:06:46 INFO] resetting WatchDogTimer
[Status 03:06:46 INFO] Starting Set [AERI set: name U58, 6 scans, 0 angle, D16300 command]
[Ingest 03:06:46 INFO] Sending XML status message
[Status 03:06:46 INFO] Mirror angle: 0
[Mirror 03:06:46 INFO] rotating to position U
[Status 03:06:47 INFO] .SET file for ACQ96 ready
[Ingest 03:06:47 INFO] Starting acquisition
[Status 03:06:47 INFO] reading housekeeping
[Status 03:07:05 INFO] acquire complete
[Status 03:07:05 INFO] writing housekeeping
[Sequencer 03:07:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:07:05 INFO] incremented U scene to 58 completed views
[Sequencer 03:07:05 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:07:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:07:05 INFO] incremented to [AERI set: name V58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:07:05 INFO] U58.SIG(18)
[sigmove 03:07:05 DEBUG] transformed U58Ma.SPC -> U58MA.SPC
[sigmove 03:07:05 DEBUG] transformed U58Mb.SPC -> U58MB.SPC
[sigmove 03:07:05 DEBUG] transformed U58Mc.SPC -> U58MC.SPC
[sigmove 03:07:05 DEBUG] transformed U58Md.SPC -> U58MD.SPC
[sigmove 03:07:05 DEBUG] transformed U58Me.SPC -> U58ME.SPC
[sigmove 03:07:05 DEBUG] transformed U58Mf.SPC -> U58MF.SPC
[Status 03:07:05 INFO] data for U58 transferred to science data processing
[Tidy 03:07:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:07:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:07:05 INFO] resetting WatchDogTimer
[Status 03:07:05 INFO] Starting Set [AERI set: name V58, 6 scans, 0 angle, D16300 command]
[Ingest 03:07:05 INFO] Sending XML status message
[Status 03:07:05 INFO] Mirror angle: 0
[Mirror 03:07:06 INFO] rotating to position V
[Status 03:07:06 INFO] .SET file for ACQ96 ready
[Ingest 03:07:06 INFO] Starting acquisition
[Status 03:07:06 INFO] reading housekeeping
[Status 03:07:24 INFO] acquire complete
[Status 03:07:24 INFO] writing housekeeping
[Sequencer 03:07:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:07:24 INFO] incremented V scene to 58 completed views
[Sequencer 03:07:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:07:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:07:24 INFO] incremented to [AERI set: name W58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:07:24 INFO] V58.SIG(18)
[sigmove 03:07:24 DEBUG] transformed V58Ma.SPC -> V58MA.SPC
[sigmove 03:07:24 DEBUG] transformed V58Mb.SPC -> V58MB.SPC
[sigmove 03:07:24 DEBUG] transformed V58Mc.SPC -> V58MC.SPC
[sigmove 03:07:24 DEBUG] transformed V58Md.SPC -> V58MD.SPC
[sigmove 03:07:24 DEBUG] transformed V58Me.SPC -> V58ME.SPC
[sigmove 03:07:24 DEBUG] transformed V58Mf.SPC -> V58MF.SPC
[Status 03:07:24 INFO] data for V58 transferred to science data processing
[Tidy 03:07:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:07:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:07:24 INFO] resetting WatchDogTimer
[Status 03:07:25 INFO] Starting Set [AERI set: name W58, 6 scans, 0 angle, D16300 command]
[Ingest 03:07:25 INFO] Sending XML status message
[Status 03:07:25 INFO] Mirror angle: 0
[Mirror 03:07:25 INFO] rotating to position W
[Status 03:07:25 INFO] .SET file for ACQ96 ready
[Ingest 03:07:25 INFO] Starting acquisition
[Status 03:07:25 INFO] reading housekeeping
[Status 03:07:43 INFO] acquire complete
[Status 03:07:44 INFO] writing housekeeping
[Sequencer 03:07:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:07:44 INFO] incremented W scene to 58 completed views
[Sequencer 03:07:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:07:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:07:44 INFO] incremented to [AERI set: name X58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:07:44 INFO] W58.SIG(18)
[sigmove 03:07:44 DEBUG] transformed W58Ma.SPC -> W58MA.SPC
[sigmove 03:07:44 DEBUG] transformed W58Mb.SPC -> W58MB.SPC
[sigmove 03:07:44 DEBUG] transformed W58Mc.SPC -> W58MC.SPC
[sigmove 03:07:44 DEBUG] transformed W58Md.SPC -> W58MD.SPC
[sigmove 03:07:44 DEBUG] transformed W58Me.SPC -> W58ME.SPC
[sigmove 03:07:44 DEBUG] transformed W58Mf.SPC -> W58MF.SPC
[Status 03:07:44 INFO] data for W58 transferred to science data processing
[Tidy 03:07:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:07:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:07:44 INFO] resetting WatchDogTimer
[Status 03:07:44 INFO] Starting Set [AERI set: name X58, 6 scans, 0 angle, D16300 command]
[Ingest 03:07:44 INFO] Sending XML status message
[Status 03:07:44 INFO] Mirror angle: 0
[Mirror 03:07:44 INFO] rotating to position X
[Status 03:07:44 INFO] .SET file for ACQ96 ready
[Ingest 03:07:44 INFO] Starting acquisition
[Status 03:07:44 INFO] reading housekeeping
[Status 03:08:02 INFO] acquire complete
[Status 03:08:04 INFO] writing housekeeping
[Sequencer 03:08:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:08:04 INFO] incremented X scene to 58 completed views
[Sequencer 03:08:04 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:08:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:08:04 INFO] incremented to [AERI set: name Y58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:08:04 INFO] X58.SIG(18)
[sigmove 03:08:04 DEBUG] transformed X58Ma.SPC -> X58MA.SPC
[sigmove 03:08:04 DEBUG] transformed X58Mb.SPC -> X58MB.SPC
[sigmove 03:08:04 DEBUG] transformed X58Mc.SPC -> X58MC.SPC
[sigmove 03:08:04 DEBUG] transformed X58Md.SPC -> X58MD.SPC
[sigmove 03:08:04 DEBUG] transformed X58Me.SPC -> X58ME.SPC
[sigmove 03:08:04 DEBUG] transformed X58Mf.SPC -> X58MF.SPC
[Status 03:08:04 INFO] data for X58 transferred to science data processing
[Tidy 03:08:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:08:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:08:04 INFO] resetting WatchDogTimer
[Status 03:08:04 INFO] Starting Set [AERI set: name Y58, 6 scans, 0 angle, D16300 command]
[Ingest 03:08:04 INFO] Sending XML status message
[Status 03:08:04 INFO] Mirror angle: 0
[Mirror 03:08:04 INFO] rotating to position Y
[Status 03:08:04 INFO] .SET file for ACQ96 ready
[Ingest 03:08:04 INFO] Starting acquisition
[Status 03:08:04 INFO] reading housekeeping
[Status 03:08:22 INFO] acquire complete
[Status 03:08:23 INFO] writing housekeeping
[Sequencer 03:08:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:08:23 INFO] incremented Y scene to 58 completed views
[Sequencer 03:08:23 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:08:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:08:23 INFO] incremented to [AERI set: name Z58, 6 scans, 0 angle, D16300 command] set
[sigmove 03:08:23 INFO] Y58.SIG(18)
[sigmove 03:08:23 DEBUG] transformed Y58Ma.SPC -> Y58MA.SPC
[sigmove 03:08:23 DEBUG] transformed Y58Mb.SPC -> Y58MB.SPC
[sigmove 03:08:23 DEBUG] transformed Y58Mc.SPC -> Y58MC.SPC
[sigmove 03:08:23 DEBUG] transformed Y58Md.SPC -> Y58MD.SPC
[sigmove 03:08:23 DEBUG] transformed Y58Me.SPC -> Y58ME.SPC
[sigmove 03:08:23 DEBUG] transformed Y58Mf.SPC -> Y58MF.SPC
[Status 03:08:23 INFO] data for Y58 transferred to science data processing
[Tidy 03:08:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:08:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:08:23 INFO] resetting WatchDogTimer
[Status 03:08:23 INFO] Starting Set [AERI set: name Z58, 6 scans, 0 angle, D16300 command]
[Ingest 03:08:23 INFO] Sending XML status message
[Status 03:08:23 INFO] Mirror angle: 0
[Mirror 03:08:23 INFO] rotating to position Z
[Status 03:08:23 INFO] .SET file for ACQ96 ready
[Ingest 03:08:23 INFO] Starting acquisition
[Status 03:08:23 INFO] reading housekeeping
[Status 03:08:42 INFO] acquire complete
[Status 03:08:42 INFO] writing housekeeping
[Sequencer 03:08:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:08:42 INFO] incremented Z scene to 58 completed views
[Sequencer 03:08:42 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:08:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:08:42 INFO] incremented to [AERI set: name H59, 6 scans, 60 angle, D22500 command] set
[sigmove 03:08:42 INFO] Z58.SIG(18)
[sigmove 03:08:42 DEBUG] transformed Z58Ma.SPC -> Z58MA.SPC
[sigmove 03:08:42 DEBUG] transformed Z58Mb.SPC -> Z58MB.SPC
[sigmove 03:08:42 DEBUG] transformed Z58Mc.SPC -> Z58MC.SPC
[sigmove 03:08:42 DEBUG] transformed Z58Md.SPC -> Z58MD.SPC
[sigmove 03:08:42 DEBUG] transformed Z58Me.SPC -> Z58ME.SPC
[sigmove 03:08:42 DEBUG] transformed Z58Mf.SPC -> Z58MF.SPC
[Status 03:08:42 INFO] data for Z58 transferred to science data processing
[Tidy 03:08:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:08:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:08:42 INFO] resetting WatchDogTimer
[Status 03:08:42 INFO] Starting Set [AERI set: name H59, 6 scans, 60 angle, D22500 command]
[Ingest 03:08:42 INFO] Sending XML status message
[Status 03:08:42 INFO] Mirror angle: 60
[Mirror 03:08:42 INFO] rotating to position H
[Status 03:08:43 INFO] .SET file for ACQ96 ready
[Ingest 03:08:43 INFO] Starting acquisition
[Status 03:08:43 INFO] reading housekeeping
[Status 03:09:01 INFO] acquire complete
[Status 03:09:01 INFO] writing housekeeping
[Sequencer 03:09:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:09:01 INFO] incremented H scene to 59 completed views
[Sequencer 03:09:01 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:09:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:09:01 INFO] incremented to [AERI set: name A59, 6 scans, 120 angle, D28300 command] set
[sigmove 03:09:01 INFO] H59.SIG(18)
[sigmove 03:09:01 DEBUG] transformed H59Ma.SPC -> H59MA.SPC
[sigmove 03:09:01 DEBUG] transformed H59Mb.SPC -> H59MB.SPC
[sigmove 03:09:01 DEBUG] transformed H59Mc.SPC -> H59MC.SPC
[sigmove 03:09:01 DEBUG] transformed H59Md.SPC -> H59MD.SPC
[sigmove 03:09:01 DEBUG] transformed H59Me.SPC -> H59ME.SPC
[sigmove 03:09:01 DEBUG] transformed H59Mf.SPC -> H59MF.SPC
[Status 03:09:01 INFO] data for H59 transferred to science data processing
[Tidy 03:09:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:09:01 INFO] A57.FIN(19),H57.FIN(19),S57.FIN(19),T57.FIN(19),U57.FIN(19),V57.FIN(19),W57.FIN(19),X57.FIN(19),Y57.FIN(19),Z57.FIN(19),A58.FIN(19),H58.FIN(19),S58.FIN(19),T58.FIN(19),U58.FIN(19),V58.FIN(19),W58.FIN(19),X58.FIN(19),Y58.FIN(19),Z58.FIN(19)
[sigmove 03:09:01 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:09:01 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:09:02 DEBUG] done zipping
[WatchDog 03:09:02 INFO] resetting WatchDogTimer
[Status 03:09:02 INFO] Starting Set [AERI set: name A59, 6 scans, 120 angle, D28300 command]
[Ingest 03:09:02 INFO] Sending XML status message
[Status 03:09:02 INFO] Mirror angle: 120
[Mirror 03:09:03 INFO] rotating to position A
[Status 03:09:03 INFO] .SET file for ACQ96 ready
[Ingest 03:09:03 INFO] Starting acquisition
[Status 03:09:04 INFO] reading housekeeping
[Status 03:09:22 INFO] acquire complete
[Status 03:09:22 INFO] writing housekeeping
[Sequencer 03:09:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:09:22 INFO] incremented A scene to 59 completed views
[Sequencer 03:09:22 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:09:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:09:22 INFO] incremented to [AERI set: name S59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:09:22 INFO] A59.SIG(18)
[sigmove 03:09:22 DEBUG] transformed A59Ma.SPC -> A59MA.SPC
[sigmove 03:09:22 DEBUG] transformed A59Mb.SPC -> A59MB.SPC
[sigmove 03:09:22 DEBUG] transformed A59Mc.SPC -> A59MC.SPC
[sigmove 03:09:22 DEBUG] transformed A59Md.SPC -> A59MD.SPC
[sigmove 03:09:22 DEBUG] transformed A59Me.SPC -> A59ME.SPC
[sigmove 03:09:22 DEBUG] transformed A59Mf.SPC -> A59MF.SPC
[Status 03:09:22 INFO] data for A59 transferred to science data processing
[Tidy 03:09:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:09:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:09:22 INFO] resetting WatchDogTimer
[Status 03:09:22 INFO] Starting Set [AERI set: name S59, 6 scans, 0 angle, D16300 command]
[Ingest 03:09:22 INFO] Sending XML status message
[Status 03:09:22 INFO] Mirror angle: 0
[Mirror 03:09:23 INFO] rotating to position S
[Status 03:09:24 INFO] .SET file for ACQ96 ready
[Ingest 03:09:24 INFO] Starting acquisition
[Status 03:09:24 INFO] reading housekeeping
[Status 03:09:42 INFO] acquire complete
[Status 03:09:43 INFO] writing housekeeping
[Sequencer 03:09:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:09:43 INFO] incremented S scene to 59 completed views
[Sequencer 03:09:43 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:09:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:09:43 INFO] incremented to [AERI set: name T59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:09:43 INFO] S59.SIG(18)
[sigmove 03:09:43 DEBUG] transformed S59Ma.SPC -> S59MA.SPC
[sigmove 03:09:43 DEBUG] transformed S59Mb.SPC -> S59MB.SPC
[sigmove 03:09:43 DEBUG] transformed S59Mc.SPC -> S59MC.SPC
[sigmove 03:09:43 DEBUG] transformed S59Md.SPC -> S59MD.SPC
[sigmove 03:09:43 DEBUG] transformed S59Me.SPC -> S59ME.SPC
[sigmove 03:09:43 DEBUG] transformed S59Mf.SPC -> S59MF.SPC
[Status 03:09:43 INFO] data for S59 transferred to science data processing
[Tidy 03:09:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:09:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:09:43 INFO] resetting WatchDogTimer
[Status 03:09:43 INFO] Starting Set [AERI set: name T59, 6 scans, 0 angle, D16300 command]
[Ingest 03:09:43 INFO] Sending XML status message
[Status 03:09:43 INFO] Mirror angle: 0
[Mirror 03:09:43 INFO] rotating to position T
[Status 03:09:43 INFO] .SET file for ACQ96 ready
[Ingest 03:09:43 INFO] Starting acquisition
[Status 03:09:43 INFO] reading housekeeping
[Status 03:10:05 INFO] acquire complete
[Status 03:10:05 INFO] writing housekeeping
[Sequencer 03:10:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:10:05 INFO] incremented T scene to 59 completed views
[Sequencer 03:10:05 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:10:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:10:05 INFO] incremented to [AERI set: name U59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:10:05 INFO] T59.SIG(18)
[sigmove 03:10:05 DEBUG] transformed T59Ma.SPC -> T59MA.SPC
[sigmove 03:10:05 DEBUG] transformed T59Mb.SPC -> T59MB.SPC
[sigmove 03:10:05 DEBUG] transformed T59Mc.SPC -> T59MC.SPC
[sigmove 03:10:05 DEBUG] transformed T59Md.SPC -> T59MD.SPC
[sigmove 03:10:05 DEBUG] transformed T59Me.SPC -> T59ME.SPC
[sigmove 03:10:05 DEBUG] transformed T59Mf.SPC -> T59MF.SPC
[Status 03:10:05 INFO] data for T59 transferred to science data processing
[Tidy 03:10:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:10:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:10:05 INFO] resetting WatchDogTimer
[Status 03:10:05 INFO] Starting Set [AERI set: name U59, 6 scans, 0 angle, D16300 command]
[Ingest 03:10:05 INFO] Sending XML status message
[Status 03:10:05 INFO] Mirror angle: 0
[Mirror 03:10:05 INFO] rotating to position U
[Status 03:10:05 INFO] .SET file for ACQ96 ready
[Ingest 03:10:06 INFO] Starting acquisition
[Status 03:10:06 INFO] reading housekeeping
[Status 03:10:24 INFO] acquire complete
[Status 03:10:24 INFO] writing housekeeping
[Sequencer 03:10:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:10:24 INFO] incremented U scene to 59 completed views
[Sequencer 03:10:24 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:10:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:10:24 INFO] incremented to [AERI set: name V59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:10:24 INFO] U59.SIG(18)
[sigmove 03:10:24 DEBUG] transformed U59Ma.SPC -> U59MA.SPC
[sigmove 03:10:24 DEBUG] transformed U59Mb.SPC -> U59MB.SPC
[sigmove 03:10:24 DEBUG] transformed U59Mc.SPC -> U59MC.SPC
[sigmove 03:10:24 DEBUG] transformed U59Md.SPC -> U59MD.SPC
[sigmove 03:10:24 DEBUG] transformed U59Me.SPC -> U59ME.SPC
[sigmove 03:10:24 DEBUG] transformed U59Mf.SPC -> U59MF.SPC
[Status 03:10:24 INFO] data for U59 transferred to science data processing
[Tidy 03:10:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:10:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:10:24 INFO] resetting WatchDogTimer
[Status 03:10:24 INFO] Starting Set [AERI set: name V59, 6 scans, 0 angle, D16300 command]
[Ingest 03:10:24 INFO] Sending XML status message
[Status 03:10:24 INFO] Mirror angle: 0
[Mirror 03:10:24 INFO] rotating to position V
[Status 03:10:25 INFO] .SET file for ACQ96 ready
[Ingest 03:10:25 INFO] Starting acquisition
[Status 03:10:25 INFO] reading housekeeping
[Status 03:10:43 INFO] acquire complete
[Status 03:10:43 INFO] writing housekeeping
[Sequencer 03:10:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:10:43 INFO] incremented V scene to 59 completed views
[Sequencer 03:10:43 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:10:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:10:43 INFO] incremented to [AERI set: name W59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:10:43 INFO] V59.SIG(18)
[sigmove 03:10:43 DEBUG] transformed V59Ma.SPC -> V59MA.SPC
[sigmove 03:10:43 DEBUG] transformed V59Mb.SPC -> V59MB.SPC
[sigmove 03:10:43 DEBUG] transformed V59Mc.SPC -> V59MC.SPC
[sigmove 03:10:43 DEBUG] transformed V59Md.SPC -> V59MD.SPC
[sigmove 03:10:43 DEBUG] transformed V59Me.SPC -> V59ME.SPC
[sigmove 03:10:43 DEBUG] transformed V59Mf.SPC -> V59MF.SPC
[Status 03:10:43 INFO] data for V59 transferred to science data processing
[Tidy 03:10:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:10:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:10:43 INFO] resetting WatchDogTimer
[Status 03:10:43 INFO] Starting Set [AERI set: name W59, 6 scans, 0 angle, D16300 command]
[Ingest 03:10:43 INFO] Sending XML status message
[Status 03:10:43 INFO] Mirror angle: 0
[Mirror 03:10:43 INFO] rotating to position W
[Status 03:10:44 INFO] .SET file for ACQ96 ready
[Ingest 03:10:44 INFO] Starting acquisition
[Status 03:10:44 INFO] reading housekeeping
[Status 03:11:02 INFO] acquire complete
[Status 03:11:02 INFO] writing housekeeping
[Sequencer 03:11:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:11:02 INFO] incremented W scene to 59 completed views
[Sequencer 03:11:02 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:11:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:11:02 INFO] incremented to [AERI set: name X59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:11:02 INFO] W59.SIG(18)
[sigmove 03:11:02 DEBUG] transformed W59Ma.SPC -> W59MA.SPC
[sigmove 03:11:02 DEBUG] transformed W59Mb.SPC -> W59MB.SPC
[sigmove 03:11:02 DEBUG] transformed W59Mc.SPC -> W59MC.SPC
[sigmove 03:11:02 DEBUG] transformed W59Md.SPC -> W59MD.SPC
[sigmove 03:11:02 DEBUG] transformed W59Me.SPC -> W59ME.SPC
[sigmove 03:11:02 DEBUG] transformed W59Mf.SPC -> W59MF.SPC
[Status 03:11:02 INFO] data for W59 transferred to science data processing
[Tidy 03:11:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:11:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:11:02 INFO] resetting WatchDogTimer
[Status 03:11:02 INFO] Starting Set [AERI set: name X59, 6 scans, 0 angle, D16300 command]
[Ingest 03:11:02 INFO] Sending XML status message
[Status 03:11:02 INFO] Mirror angle: 0
[Mirror 03:11:02 INFO] rotating to position X
[Status 03:11:03 INFO] .SET file for ACQ96 ready
[Ingest 03:11:03 INFO] Starting acquisition
[Status 03:11:03 INFO] reading housekeeping
[Status 03:11:21 INFO] acquire complete
[Status 03:11:21 INFO] writing housekeeping
[Sequencer 03:11:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:11:21 INFO] incremented X scene to 59 completed views
[Sequencer 03:11:21 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:11:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:11:21 INFO] incremented to [AERI set: name Y59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:11:21 INFO] X59.SIG(18)
[sigmove 03:11:21 DEBUG] transformed X59Ma.SPC -> X59MA.SPC
[sigmove 03:11:21 DEBUG] transformed X59Mb.SPC -> X59MB.SPC
[sigmove 03:11:21 DEBUG] transformed X59Mc.SPC -> X59MC.SPC
[sigmove 03:11:21 DEBUG] transformed X59Md.SPC -> X59MD.SPC
[sigmove 03:11:21 DEBUG] transformed X59Me.SPC -> X59ME.SPC
[sigmove 03:11:21 DEBUG] transformed X59Mf.SPC -> X59MF.SPC
[Status 03:11:21 INFO] data for X59 transferred to science data processing
[Tidy 03:11:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:11:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:11:21 INFO] resetting WatchDogTimer
[Status 03:11:21 INFO] Starting Set [AERI set: name Y59, 6 scans, 0 angle, D16300 command]
[Ingest 03:11:21 INFO] Sending XML status message
[Status 03:11:21 INFO] Mirror angle: 0
[Mirror 03:11:22 INFO] rotating to position Y
[Status 03:11:22 INFO] .SET file for ACQ96 ready
[Ingest 03:11:22 INFO] Starting acquisition
[Status 03:11:22 INFO] reading housekeeping
[Status 03:11:40 INFO] acquire complete
[Status 03:11:40 INFO] writing housekeeping
[Sequencer 03:11:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:11:40 INFO] incremented Y scene to 59 completed views
[Sequencer 03:11:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:11:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:11:40 INFO] incremented to [AERI set: name Z59, 6 scans, 0 angle, D16300 command] set
[sigmove 03:11:40 INFO] Y59.SIG(18)
[sigmove 03:11:40 DEBUG] transformed Y59Ma.SPC -> Y59MA.SPC
[sigmove 03:11:40 DEBUG] transformed Y59Mb.SPC -> Y59MB.SPC
[sigmove 03:11:40 DEBUG] transformed Y59Mc.SPC -> Y59MC.SPC
[sigmove 03:11:40 DEBUG] transformed Y59Md.SPC -> Y59MD.SPC
[sigmove 03:11:40 DEBUG] transformed Y59Me.SPC -> Y59ME.SPC
[sigmove 03:11:40 DEBUG] transformed Y59Mf.SPC -> Y59MF.SPC
[Status 03:11:40 INFO] data for Y59 transferred to science data processing
[Tidy 03:11:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:11:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:11:40 INFO] resetting WatchDogTimer
[Status 03:11:41 INFO] Starting Set [AERI set: name Z59, 6 scans, 0 angle, D16300 command]
[Ingest 03:11:41 INFO] Sending XML status message
[Status 03:11:41 INFO] Mirror angle: 0
[Mirror 03:11:41 INFO] rotating to position Z
[Status 03:11:41 INFO] .SET file for ACQ96 ready
[Ingest 03:11:41 INFO] Starting acquisition
[Status 03:11:41 INFO] reading housekeeping
[Status 03:11:59 INFO] acquire complete
[Status 03:11:59 INFO] writing housekeeping
[Sequencer 03:11:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:12:00 INFO] incremented Z scene to 59 completed views
[Sequencer 03:12:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:12:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:12:00 INFO] incremented to [AERI set: name A60, 6 scans, 120 angle, D28300 command] set
[sigmove 03:12:00 INFO] Z59.SIG(18)
[sigmove 03:12:00 DEBUG] transformed Z59Ma.SPC -> Z59MA.SPC
[sigmove 03:12:00 DEBUG] transformed Z59Mb.SPC -> Z59MB.SPC
[sigmove 03:12:00 DEBUG] transformed Z59Mc.SPC -> Z59MC.SPC
[sigmove 03:12:00 DEBUG] transformed Z59Md.SPC -> Z59MD.SPC
[sigmove 03:12:00 DEBUG] transformed Z59Me.SPC -> Z59ME.SPC
[sigmove 03:12:00 DEBUG] transformed Z59Mf.SPC -> Z59MF.SPC
[Status 03:12:00 INFO] data for Z59 transferred to science data processing
[Tidy 03:12:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:12:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:12:00 INFO] resetting WatchDogTimer
[Status 03:12:00 INFO] Starting Set [AERI set: name A60, 6 scans, 120 angle, D28300 command]
[Ingest 03:12:00 INFO] Sending XML status message
[Status 03:12:00 INFO] Mirror angle: 120
[Mirror 03:12:00 INFO] rotating to position A
[Status 03:12:01 INFO] .SET file for ACQ96 ready
[Ingest 03:12:01 INFO] Starting acquisition
[Status 03:12:01 INFO] reading housekeeping
[Status 03:12:19 INFO] acquire complete
[Status 03:12:20 INFO] writing housekeeping
[Sequencer 03:12:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:12:20 INFO] incremented A scene to 60 completed views
[Sequencer 03:12:20 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:12:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:12:20 INFO] incremented to [AERI set: name H60, 6 scans, 60 angle, D22500 command] set
[sigmove 03:12:20 INFO] A60.SIG(18)
[sigmove 03:12:20 DEBUG] transformed A60Ma.SPC -> A60MA.SPC
[sigmove 03:12:20 DEBUG] transformed A60Mb.SPC -> A60MB.SPC
[sigmove 03:12:20 DEBUG] transformed A60Mc.SPC -> A60MC.SPC
[sigmove 03:12:20 DEBUG] transformed A60Md.SPC -> A60MD.SPC
[sigmove 03:12:20 DEBUG] transformed A60Me.SPC -> A60ME.SPC
[sigmove 03:12:20 DEBUG] transformed A60Mf.SPC -> A60MF.SPC
[Status 03:12:20 INFO] data for A60 transferred to science data processing
[Tidy 03:12:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:12:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:12:20 INFO] resetting WatchDogTimer
[Status 03:12:20 INFO] Starting Set [AERI set: name H60, 6 scans, 60 angle, D22500 command]
[Ingest 03:12:20 INFO] Sending XML status message
[Status 03:12:20 INFO] Mirror angle: 60
[Mirror 03:12:20 INFO] rotating to position H
[Status 03:12:21 INFO] .SET file for ACQ96 ready
[Ingest 03:12:21 INFO] Starting acquisition
[Status 03:12:21 INFO] reading housekeeping
[Status 03:12:38 INFO] acquire complete
[Status 03:12:40 INFO] writing housekeeping
[Sequencer 03:12:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:12:40 INFO] incremented H scene to 60 completed views
[Sequencer 03:12:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:12:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:12:40 INFO] incremented to [AERI set: name S60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:12:40 INFO] H60.SIG(18)
[sigmove 03:12:40 DEBUG] transformed H60Ma.SPC -> H60MA.SPC
[sigmove 03:12:40 DEBUG] transformed H60Mb.SPC -> H60MB.SPC
[sigmove 03:12:40 DEBUG] transformed H60Mc.SPC -> H60MC.SPC
[sigmove 03:12:40 DEBUG] transformed H60Md.SPC -> H60MD.SPC
[sigmove 03:12:40 DEBUG] transformed H60Me.SPC -> H60ME.SPC
[sigmove 03:12:40 DEBUG] transformed H60Mf.SPC -> H60MF.SPC
[Status 03:12:40 INFO] data for H60 transferred to science data processing
[Tidy 03:12:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:12:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:12:40 INFO] resetting WatchDogTimer
[Status 03:12:40 INFO] Starting Set [AERI set: name S60, 6 scans, 0 angle, D16300 command]
[Ingest 03:12:40 INFO] Sending XML status message
[Status 03:12:40 INFO] Mirror angle: 0
[Mirror 03:12:40 INFO] rotating to position S
[Status 03:12:41 INFO] .SET file for ACQ96 ready
[Ingest 03:12:41 INFO] Starting acquisition
[Status 03:12:41 INFO] reading housekeeping
[Status 03:12:59 INFO] acquire complete
[Status 03:12:59 INFO] writing housekeeping
[Sequencer 03:12:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:12:59 INFO] incremented S scene to 60 completed views
[Sequencer 03:12:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:12:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:12:59 INFO] incremented to [AERI set: name T60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:12:59 INFO] S60.SIG(18)
[sigmove 03:12:59 DEBUG] transformed S60Ma.SPC -> S60MA.SPC
[sigmove 03:12:59 DEBUG] transformed S60Mb.SPC -> S60MB.SPC
[sigmove 03:12:59 DEBUG] transformed S60Mc.SPC -> S60MC.SPC
[sigmove 03:12:59 DEBUG] transformed S60Md.SPC -> S60MD.SPC
[sigmove 03:12:59 DEBUG] transformed S60Me.SPC -> S60ME.SPC
[sigmove 03:12:59 DEBUG] transformed S60Mf.SPC -> S60MF.SPC
[Status 03:12:59 INFO] data for S60 transferred to science data processing
[Tidy 03:12:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:12:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:12:59 INFO] resetting WatchDogTimer
[Status 03:12:59 INFO] Starting Set [AERI set: name T60, 6 scans, 0 angle, D16300 command]
[Ingest 03:12:59 INFO] Sending XML status message
[Status 03:12:59 INFO] Mirror angle: 0
[Mirror 03:12:59 INFO] rotating to position T
[Status 03:12:59 INFO] .SET file for ACQ96 ready
[Ingest 03:13:00 INFO] Starting acquisition
[Status 03:13:00 INFO] reading housekeeping
[Status 03:13:18 INFO] acquire complete
[Status 03:13:18 INFO] writing housekeeping
[Sequencer 03:13:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:13:18 INFO] incremented T scene to 60 completed views
[Sequencer 03:13:18 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:13:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:13:18 INFO] incremented to [AERI set: name U60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:13:18 INFO] T60.SIG(18)
[sigmove 03:13:18 DEBUG] transformed T60Ma.SPC -> T60MA.SPC
[sigmove 03:13:18 DEBUG] transformed T60Mb.SPC -> T60MB.SPC
[sigmove 03:13:18 DEBUG] transformed T60Mc.SPC -> T60MC.SPC
[sigmove 03:13:18 DEBUG] transformed T60Md.SPC -> T60MD.SPC
[sigmove 03:13:18 DEBUG] transformed T60Me.SPC -> T60ME.SPC
[sigmove 03:13:18 DEBUG] transformed T60Mf.SPC -> T60MF.SPC
[Status 03:13:18 INFO] data for T60 transferred to science data processing
[Tidy 03:13:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:13:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:13:18 INFO] resetting WatchDogTimer
[Status 03:13:18 INFO] Starting Set [AERI set: name U60, 6 scans, 0 angle, D16300 command]
[Ingest 03:13:18 INFO] Sending XML status message
[Status 03:13:18 INFO] Mirror angle: 0
[Mirror 03:13:18 INFO] rotating to position U
[Status 03:13:19 INFO] .SET file for ACQ96 ready
[Ingest 03:13:19 INFO] Starting acquisition
[Status 03:13:19 INFO] reading housekeeping
[Status 03:13:37 INFO] acquire complete
[Status 03:13:37 INFO] writing housekeeping
[Sequencer 03:13:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:13:37 INFO] incremented U scene to 60 completed views
[Sequencer 03:13:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:13:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:13:37 INFO] incremented to [AERI set: name V60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:13:37 INFO] U60.SIG(18)
[sigmove 03:13:37 DEBUG] transformed U60Ma.SPC -> U60MA.SPC
[sigmove 03:13:37 DEBUG] transformed U60Mb.SPC -> U60MB.SPC
[sigmove 03:13:37 DEBUG] transformed U60Mc.SPC -> U60MC.SPC
[sigmove 03:13:37 DEBUG] transformed U60Md.SPC -> U60MD.SPC
[sigmove 03:13:37 DEBUG] transformed U60Me.SPC -> U60ME.SPC
[sigmove 03:13:37 DEBUG] transformed U60Mf.SPC -> U60MF.SPC
[Status 03:13:37 INFO] data for U60 transferred to science data processing
[Tidy 03:13:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:13:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:13:37 INFO] resetting WatchDogTimer
[Status 03:13:37 INFO] Starting Set [AERI set: name V60, 6 scans, 0 angle, D16300 command]
[Ingest 03:13:37 INFO] Sending XML status message
[Status 03:13:37 INFO] Mirror angle: 0
[Mirror 03:13:37 INFO] rotating to position V
[Status 03:13:38 INFO] .SET file for ACQ96 ready
[Ingest 03:13:38 INFO] Starting acquisition
[Status 03:13:38 INFO] reading housekeeping
[Status 03:13:56 INFO] acquire complete
[Status 03:13:56 INFO] writing housekeeping
[Sequencer 03:13:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:13:56 INFO] incremented V scene to 60 completed views
[Sequencer 03:13:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:13:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:13:56 INFO] incremented to [AERI set: name W60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:13:56 INFO] V60.SIG(18)
[sigmove 03:13:56 DEBUG] transformed V60Ma.SPC -> V60MA.SPC
[sigmove 03:13:56 DEBUG] transformed V60Mb.SPC -> V60MB.SPC
[sigmove 03:13:56 DEBUG] transformed V60Mc.SPC -> V60MC.SPC
[sigmove 03:13:56 DEBUG] transformed V60Md.SPC -> V60MD.SPC
[sigmove 03:13:56 DEBUG] transformed V60Me.SPC -> V60ME.SPC
[sigmove 03:13:56 DEBUG] transformed V60Mf.SPC -> V60MF.SPC
[Status 03:13:56 INFO] data for V60 transferred to science data processing
[Tidy 03:13:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:13:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:13:56 INFO] resetting WatchDogTimer
[Status 03:13:56 INFO] Starting Set [AERI set: name W60, 6 scans, 0 angle, D16300 command]
[Ingest 03:13:56 INFO] Sending XML status message
[Status 03:13:56 INFO] Mirror angle: 0
[Mirror 03:13:57 INFO] rotating to position W
[Status 03:13:57 INFO] .SET file for ACQ96 ready
[Ingest 03:13:57 INFO] Starting acquisition
[Status 03:13:57 INFO] reading housekeeping
[Status 03:14:15 INFO] acquire complete
[Status 03:14:15 INFO] writing housekeeping
[Sequencer 03:14:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:14:15 INFO] incremented W scene to 60 completed views
[Sequencer 03:14:15 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:14:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:14:15 INFO] incremented to [AERI set: name X60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:14:15 INFO] W60.SIG(18)
[sigmove 03:14:15 DEBUG] transformed W60Ma.SPC -> W60MA.SPC
[sigmove 03:14:15 DEBUG] transformed W60Mb.SPC -> W60MB.SPC
[sigmove 03:14:15 DEBUG] transformed W60Mc.SPC -> W60MC.SPC
[sigmove 03:14:15 DEBUG] transformed W60Md.SPC -> W60MD.SPC
[sigmove 03:14:15 DEBUG] transformed W60Me.SPC -> W60ME.SPC
[sigmove 03:14:15 DEBUG] transformed W60Mf.SPC -> W60MF.SPC
[Status 03:14:15 INFO] data for W60 transferred to science data processing
[Tidy 03:14:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:14:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:14:15 INFO] resetting WatchDogTimer
[Status 03:14:15 INFO] Starting Set [AERI set: name X60, 6 scans, 0 angle, D16300 command]
[Ingest 03:14:15 INFO] Sending XML status message
[Status 03:14:15 INFO] Mirror angle: 0
[Mirror 03:14:16 INFO] rotating to position X
[Status 03:14:16 INFO] .SET file for ACQ96 ready
[Ingest 03:14:16 INFO] Starting acquisition
[Status 03:14:16 INFO] reading housekeeping
[Status 03:14:34 INFO] acquire complete
[Status 03:14:34 INFO] writing housekeeping
[Sequencer 03:14:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:14:34 INFO] incremented X scene to 60 completed views
[Sequencer 03:14:34 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:14:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:14:34 INFO] incremented to [AERI set: name Y60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:14:34 INFO] X60.SIG(18)
[sigmove 03:14:34 DEBUG] transformed X60Ma.SPC -> X60MA.SPC
[sigmove 03:14:34 DEBUG] transformed X60Mb.SPC -> X60MB.SPC
[sigmove 03:14:34 DEBUG] transformed X60Mc.SPC -> X60MC.SPC
[sigmove 03:14:34 DEBUG] transformed X60Md.SPC -> X60MD.SPC
[sigmove 03:14:34 DEBUG] transformed X60Me.SPC -> X60ME.SPC
[sigmove 03:14:34 DEBUG] transformed X60Mf.SPC -> X60MF.SPC
[Status 03:14:34 INFO] data for X60 transferred to science data processing
[Tidy 03:14:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:14:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:14:34 INFO] resetting WatchDogTimer
[Status 03:14:35 INFO] Starting Set [AERI set: name Y60, 6 scans, 0 angle, D16300 command]
[Ingest 03:14:35 INFO] Sending XML status message
[Status 03:14:35 INFO] Mirror angle: 0
[Mirror 03:14:35 INFO] rotating to position Y
[Status 03:14:35 INFO] .SET file for ACQ96 ready
[Ingest 03:14:35 INFO] Starting acquisition
[Status 03:14:35 INFO] reading housekeeping
[Status 03:14:53 INFO] acquire complete
[Status 03:14:54 INFO] writing housekeeping
[Sequencer 03:14:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:14:54 INFO] incremented Y scene to 60 completed views
[Sequencer 03:14:54 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:14:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:14:54 INFO] incremented to [AERI set: name Z60, 6 scans, 0 angle, D16300 command] set
[sigmove 03:14:54 INFO] Y60.SIG(18)
[sigmove 03:14:54 DEBUG] transformed Y60Ma.SPC -> Y60MA.SPC
[sigmove 03:14:54 DEBUG] transformed Y60Mb.SPC -> Y60MB.SPC
[sigmove 03:14:54 DEBUG] transformed Y60Mc.SPC -> Y60MC.SPC
[sigmove 03:14:54 DEBUG] transformed Y60Md.SPC -> Y60MD.SPC
[sigmove 03:14:54 DEBUG] transformed Y60Me.SPC -> Y60ME.SPC
[sigmove 03:14:54 DEBUG] transformed Y60Mf.SPC -> Y60MF.SPC
[Status 03:14:54 INFO] data for Y60 transferred to science data processing
[Tidy 03:14:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:14:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:14:54 INFO] resetting WatchDogTimer
[Status 03:14:54 INFO] Starting Set [AERI set: name Z60, 6 scans, 0 angle, D16300 command]
[Ingest 03:14:54 INFO] Sending XML status message
[Status 03:14:54 INFO] Mirror angle: 0
[Mirror 03:14:54 INFO] rotating to position Z
[Status 03:14:54 INFO] .SET file for ACQ96 ready
[Ingest 03:14:54 INFO] Starting acquisition
[Status 03:14:54 INFO] reading housekeeping
[Status 03:15:12 INFO] acquire complete
[Status 03:15:13 INFO] writing housekeeping
[Sequencer 03:15:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:15:13 INFO] incremented Z scene to 60 completed views
[Sequencer 03:15:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:15:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:15:13 INFO] incremented to [AERI set: name H61, 6 scans, 60 angle, D22500 command] set
[sigmove 03:15:13 INFO] Z60.SIG(18)
[sigmove 03:15:13 DEBUG] transformed Z60Ma.SPC -> Z60MA.SPC
[sigmove 03:15:13 DEBUG] transformed Z60Mb.SPC -> Z60MB.SPC
[sigmove 03:15:13 DEBUG] transformed Z60Mc.SPC -> Z60MC.SPC
[sigmove 03:15:13 DEBUG] transformed Z60Md.SPC -> Z60MD.SPC
[sigmove 03:15:13 DEBUG] transformed Z60Me.SPC -> Z60ME.SPC
[sigmove 03:15:13 DEBUG] transformed Z60Mf.SPC -> Z60MF.SPC
[Status 03:15:13 INFO] data for Z60 transferred to science data processing
[Tidy 03:15:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:15:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:15:13 INFO] resetting WatchDogTimer
[Status 03:15:13 INFO] Starting Set [AERI set: name H61, 6 scans, 60 angle, D22500 command]
[Ingest 03:15:13 INFO] Sending XML status message
[Status 03:15:13 INFO] Mirror angle: 60
[Mirror 03:15:13 INFO] rotating to position H
[Status 03:15:14 INFO] .SET file for ACQ96 ready
[Ingest 03:15:14 INFO] Starting acquisition
[Status 03:15:14 INFO] reading housekeeping
[Status 03:15:31 INFO] acquire complete
[Status 03:15:32 INFO] writing housekeeping
[Sequencer 03:15:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:15:32 INFO] incremented H scene to 61 completed views
[Sequencer 03:15:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:15:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:15:32 INFO] incremented to [AERI set: name A61, 6 scans, 120 angle, D28300 command] set
[sigmove 03:15:32 INFO] H61.SIG(18)
[sigmove 03:15:32 DEBUG] transformed H61Ma.SPC -> H61MA.SPC
[sigmove 03:15:32 DEBUG] transformed H61Mb.SPC -> H61MB.SPC
[sigmove 03:15:32 DEBUG] transformed H61Mc.SPC -> H61MC.SPC
[sigmove 03:15:32 DEBUG] transformed H61Md.SPC -> H61MD.SPC
[sigmove 03:15:32 DEBUG] transformed H61Me.SPC -> H61ME.SPC
[sigmove 03:15:32 DEBUG] transformed H61Mf.SPC -> H61MF.SPC
[Status 03:15:32 INFO] data for H61 transferred to science data processing
[Tidy 03:15:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:15:32 INFO] A59.FIN(19),H59.FIN(19),S59.FIN(19),T59.FIN(19),U59.FIN(19),V59.FIN(19),W59.FIN(19),X59.FIN(19),Y59.FIN(19),Z59.FIN(19),A60.FIN(19),H60.FIN(19),S60.FIN(19),T60.FIN(19),U60.FIN(19),V60.FIN(19),W60.FIN(19),X60.FIN(19),Y60.FIN(19),Z60.FIN(19)
[sigmove 03:15:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:15:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:15:33 DEBUG] done zipping
[WatchDog 03:15:33 INFO] resetting WatchDogTimer
[Status 03:15:33 INFO] Starting Set [AERI set: name A61, 6 scans, 120 angle, D28300 command]
[Ingest 03:15:33 INFO] Sending XML status message
[Status 03:15:33 INFO] Mirror angle: 120
[Mirror 03:15:33 INFO] rotating to position A
[Status 03:15:34 INFO] .SET file for ACQ96 ready
[Ingest 03:15:34 INFO] Starting acquisition
[Status 03:15:34 INFO] reading housekeeping
[Status 03:15:53 INFO] acquire complete
[Status 03:15:53 INFO] writing housekeeping
[Sequencer 03:15:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:15:53 INFO] incremented A scene to 61 completed views
[Sequencer 03:15:53 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:15:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:15:53 INFO] incremented to [AERI set: name S61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:15:53 INFO] A61.SIG(18)
[sigmove 03:15:53 DEBUG] transformed A61Ma.SPC -> A61MA.SPC
[sigmove 03:15:53 DEBUG] transformed A61Mb.SPC -> A61MB.SPC
[sigmove 03:15:53 DEBUG] transformed A61Mc.SPC -> A61MC.SPC
[sigmove 03:15:53 DEBUG] transformed A61Md.SPC -> A61MD.SPC
[sigmove 03:15:53 DEBUG] transformed A61Me.SPC -> A61ME.SPC
[sigmove 03:15:53 DEBUG] transformed A61Mf.SPC -> A61MF.SPC
[Status 03:15:53 INFO] data for A61 transferred to science data processing
[Tidy 03:15:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:15:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:15:53 INFO] resetting WatchDogTimer
[Status 03:15:53 INFO] Starting Set [AERI set: name S61, 6 scans, 0 angle, D16300 command]
[Ingest 03:15:53 INFO] Sending XML status message
[Status 03:15:53 INFO] Mirror angle: 0
[Mirror 03:15:53 INFO] rotating to position S
[Status 03:15:55 INFO] .SET file for ACQ96 ready
[Ingest 03:15:55 INFO] Starting acquisition
[Status 03:15:55 INFO] reading housekeeping
[Status 03:16:13 INFO] acquire complete
[Status 03:16:13 INFO] writing housekeeping
[Sequencer 03:16:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:16:13 INFO] incremented S scene to 61 completed views
[Sequencer 03:16:13 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:16:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:16:13 INFO] incremented to [AERI set: name T61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:16:13 INFO] S61.SIG(18)
[sigmove 03:16:13 DEBUG] transformed S61Ma.SPC -> S61MA.SPC
[sigmove 03:16:13 DEBUG] transformed S61Mb.SPC -> S61MB.SPC
[sigmove 03:16:13 DEBUG] transformed S61Mc.SPC -> S61MC.SPC
[sigmove 03:16:13 DEBUG] transformed S61Md.SPC -> S61MD.SPC
[sigmove 03:16:13 DEBUG] transformed S61Me.SPC -> S61ME.SPC
[sigmove 03:16:13 DEBUG] transformed S61Mf.SPC -> S61MF.SPC
[Status 03:16:13 INFO] data for S61 transferred to science data processing
[Tidy 03:16:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:16:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:16:13 INFO] resetting WatchDogTimer
[Status 03:16:13 INFO] Starting Set [AERI set: name T61, 6 scans, 0 angle, D16300 command]
[Ingest 03:16:13 INFO] Sending XML status message
[Status 03:16:13 INFO] Mirror angle: 0
[Mirror 03:16:14 INFO] rotating to position T
[Status 03:16:14 INFO] .SET file for ACQ96 ready
[Ingest 03:16:14 INFO] Starting acquisition
[Status 03:16:14 INFO] reading housekeeping
[Status 03:16:32 INFO] acquire complete
[Status 03:16:32 INFO] writing housekeeping
[Sequencer 03:16:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:16:32 INFO] incremented T scene to 61 completed views
[Sequencer 03:16:32 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:16:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:16:32 INFO] incremented to [AERI set: name U61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:16:32 INFO] T61.SIG(18)
[sigmove 03:16:32 DEBUG] transformed T61Ma.SPC -> T61MA.SPC
[sigmove 03:16:32 DEBUG] transformed T61Mb.SPC -> T61MB.SPC
[sigmove 03:16:32 DEBUG] transformed T61Mc.SPC -> T61MC.SPC
[sigmove 03:16:32 DEBUG] transformed T61Md.SPC -> T61MD.SPC
[sigmove 03:16:32 DEBUG] transformed T61Me.SPC -> T61ME.SPC
[sigmove 03:16:32 DEBUG] transformed T61Mf.SPC -> T61MF.SPC
[Status 03:16:32 INFO] data for T61 transferred to science data processing
[Tidy 03:16:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:16:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:16:32 INFO] resetting WatchDogTimer
[Status 03:16:32 INFO] Starting Set [AERI set: name U61, 6 scans, 0 angle, D16300 command]
[Ingest 03:16:32 INFO] Sending XML status message
[Status 03:16:32 INFO] Mirror angle: 0
[Mirror 03:16:33 INFO] rotating to position U
[Status 03:16:33 INFO] .SET file for ACQ96 ready
[Ingest 03:16:33 INFO] Starting acquisition
[Status 03:16:33 INFO] reading housekeeping
[Status 03:16:51 INFO] acquire complete
[Status 03:16:51 INFO] writing housekeeping
[Sequencer 03:16:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:16:51 INFO] incremented U scene to 61 completed views
[Sequencer 03:16:51 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:16:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:16:51 INFO] incremented to [AERI set: name V61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:16:51 INFO] U61.SIG(18)
[sigmove 03:16:51 DEBUG] transformed U61Ma.SPC -> U61MA.SPC
[sigmove 03:16:51 DEBUG] transformed U61Mb.SPC -> U61MB.SPC
[sigmove 03:16:51 DEBUG] transformed U61Mc.SPC -> U61MC.SPC
[sigmove 03:16:51 DEBUG] transformed U61Md.SPC -> U61MD.SPC
[sigmove 03:16:51 DEBUG] transformed U61Me.SPC -> U61ME.SPC
[sigmove 03:16:51 DEBUG] transformed U61Mf.SPC -> U61MF.SPC
[Status 03:16:51 INFO] data for U61 transferred to science data processing
[Tidy 03:16:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:16:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:16:51 INFO] resetting WatchDogTimer
[Status 03:16:52 INFO] Starting Set [AERI set: name V61, 6 scans, 0 angle, D16300 command]
[Ingest 03:16:52 INFO] Sending XML status message
[Status 03:16:52 INFO] Mirror angle: 0
[Mirror 03:16:52 INFO] rotating to position V
[Status 03:16:52 INFO] .SET file for ACQ96 ready
[Ingest 03:16:52 INFO] Starting acquisition
[Status 03:16:52 INFO] reading housekeeping
[Status 03:17:10 INFO] acquire complete
[Status 03:17:10 INFO] writing housekeeping
[Sequencer 03:17:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:17:10 INFO] incremented V scene to 61 completed views
[Sequencer 03:17:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:17:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:17:10 INFO] incremented to [AERI set: name W61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:17:11 INFO] V61.SIG(18)
[sigmove 03:17:11 DEBUG] transformed V61Ma.SPC -> V61MA.SPC
[sigmove 03:17:11 DEBUG] transformed V61Mb.SPC -> V61MB.SPC
[sigmove 03:17:11 DEBUG] transformed V61Mc.SPC -> V61MC.SPC
[sigmove 03:17:11 DEBUG] transformed V61Md.SPC -> V61MD.SPC
[sigmove 03:17:11 DEBUG] transformed V61Me.SPC -> V61ME.SPC
[sigmove 03:17:11 DEBUG] transformed V61Mf.SPC -> V61MF.SPC
[Status 03:17:11 INFO] data for V61 transferred to science data processing
[Tidy 03:17:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:17:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:17:11 INFO] resetting WatchDogTimer
[Status 03:17:11 INFO] Starting Set [AERI set: name W61, 6 scans, 0 angle, D16300 command]
[Ingest 03:17:11 INFO] Sending XML status message
[Status 03:17:11 INFO] Mirror angle: 0
[Mirror 03:17:11 INFO] rotating to position W
[Status 03:17:11 INFO] .SET file for ACQ96 ready
[Ingest 03:17:11 INFO] Starting acquisition
[Status 03:17:11 INFO] reading housekeeping
[Status 03:17:29 INFO] acquire complete
[Status 03:17:30 INFO] writing housekeeping
[Sequencer 03:17:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:17:30 INFO] incremented W scene to 61 completed views
[Sequencer 03:17:30 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:17:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:17:30 INFO] incremented to [AERI set: name X61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:17:30 INFO] W61.SIG(18)
[sigmove 03:17:30 DEBUG] transformed W61Ma.SPC -> W61MA.SPC
[sigmove 03:17:30 DEBUG] transformed W61Mb.SPC -> W61MB.SPC
[sigmove 03:17:30 DEBUG] transformed W61Mc.SPC -> W61MC.SPC
[sigmove 03:17:30 DEBUG] transformed W61Md.SPC -> W61MD.SPC
[sigmove 03:17:30 DEBUG] transformed W61Me.SPC -> W61ME.SPC
[sigmove 03:17:30 DEBUG] transformed W61Mf.SPC -> W61MF.SPC
[Status 03:17:30 INFO] data for W61 transferred to science data processing
[Tidy 03:17:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:17:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:17:30 INFO] resetting WatchDogTimer
[Status 03:17:30 INFO] Starting Set [AERI set: name X61, 6 scans, 0 angle, D16300 command]
[Ingest 03:17:30 INFO] Sending XML status message
[Status 03:17:30 INFO] Mirror angle: 0
[Mirror 03:17:30 INFO] rotating to position X
[Status 03:17:30 INFO] .SET file for ACQ96 ready
[Ingest 03:17:30 INFO] Starting acquisition
[Status 03:17:30 INFO] reading housekeeping
[Status 03:17:48 INFO] acquire complete
[Status 03:17:49 INFO] writing housekeeping
[Sequencer 03:17:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:17:49 INFO] incremented X scene to 61 completed views
[Sequencer 03:17:49 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:17:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:17:49 INFO] incremented to [AERI set: name Y61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:17:49 INFO] X61.SIG(18)
[sigmove 03:17:49 DEBUG] transformed X61Ma.SPC -> X61MA.SPC
[sigmove 03:17:49 DEBUG] transformed X61Mb.SPC -> X61MB.SPC
[sigmove 03:17:49 DEBUG] transformed X61Mc.SPC -> X61MC.SPC
[sigmove 03:17:49 DEBUG] transformed X61Md.SPC -> X61MD.SPC
[sigmove 03:17:49 DEBUG] transformed X61Me.SPC -> X61ME.SPC
[sigmove 03:17:49 DEBUG] transformed X61Mf.SPC -> X61MF.SPC
[Status 03:17:49 INFO] data for X61 transferred to science data processing
[Tidy 03:17:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:17:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:17:49 INFO] resetting WatchDogTimer
[Status 03:17:49 INFO] Starting Set [AERI set: name Y61, 6 scans, 0 angle, D16300 command]
[Ingest 03:17:49 INFO] Sending XML status message
[Status 03:17:49 INFO] Mirror angle: 0
[Mirror 03:17:49 INFO] rotating to position Y
[Status 03:17:49 INFO] .SET file for ACQ96 ready
[Ingest 03:17:49 INFO] Starting acquisition
[Status 03:17:49 INFO] reading housekeeping
[Status 03:18:07 INFO] acquire complete
[Status 03:18:08 INFO] writing housekeeping
[Sequencer 03:18:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:18:08 INFO] incremented Y scene to 61 completed views
[Sequencer 03:18:08 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:18:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:18:08 INFO] incremented to [AERI set: name Z61, 6 scans, 0 angle, D16300 command] set
[sigmove 03:18:08 INFO] Y61.SIG(18)
[sigmove 03:18:08 DEBUG] transformed Y61Ma.SPC -> Y61MA.SPC
[sigmove 03:18:08 DEBUG] transformed Y61Mb.SPC -> Y61MB.SPC
[sigmove 03:18:08 DEBUG] transformed Y61Mc.SPC -> Y61MC.SPC
[sigmove 03:18:08 DEBUG] transformed Y61Md.SPC -> Y61MD.SPC
[sigmove 03:18:08 DEBUG] transformed Y61Me.SPC -> Y61ME.SPC
[sigmove 03:18:08 DEBUG] transformed Y61Mf.SPC -> Y61MF.SPC
[Status 03:18:08 INFO] data for Y61 transferred to science data processing
[Tidy 03:18:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:18:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:18:08 INFO] resetting WatchDogTimer
[Status 03:18:08 INFO] Starting Set [AERI set: name Z61, 6 scans, 0 angle, D16300 command]
[Ingest 03:18:08 INFO] Sending XML status message
[Status 03:18:08 INFO] Mirror angle: 0
[Mirror 03:18:08 INFO] rotating to position Z
[Status 03:18:08 INFO] .SET file for ACQ96 ready
[Ingest 03:18:08 INFO] Starting acquisition
[Status 03:18:08 INFO] reading housekeeping
[Status 03:18:26 INFO] acquire complete
[Status 03:18:27 INFO] writing housekeeping
[Sequencer 03:18:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:18:27 INFO] incremented Z scene to 61 completed views
[Sequencer 03:18:27 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:18:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:18:27 INFO] incremented to [AERI set: name A62, 6 scans, 120 angle, D28300 command] set
[sigmove 03:18:27 INFO] Z61.SIG(18)
[sigmove 03:18:27 DEBUG] transformed Z61Ma.SPC -> Z61MA.SPC
[sigmove 03:18:27 DEBUG] transformed Z61Mb.SPC -> Z61MB.SPC
[sigmove 03:18:27 DEBUG] transformed Z61Mc.SPC -> Z61MC.SPC
[sigmove 03:18:27 DEBUG] transformed Z61Md.SPC -> Z61MD.SPC
[sigmove 03:18:27 DEBUG] transformed Z61Me.SPC -> Z61ME.SPC
[sigmove 03:18:27 DEBUG] transformed Z61Mf.SPC -> Z61MF.SPC
[Status 03:18:27 INFO] data for Z61 transferred to science data processing
[Tidy 03:18:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:18:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:18:27 INFO] resetting WatchDogTimer
[Status 03:18:27 INFO] Starting Set [AERI set: name A62, 6 scans, 120 angle, D28300 command]
[Ingest 03:18:27 INFO] Sending XML status message
[Status 03:18:27 INFO] Mirror angle: 120
[Mirror 03:18:27 INFO] rotating to position A
[Status 03:18:28 INFO] .SET file for ACQ96 ready
[Ingest 03:18:28 INFO] Starting acquisition
[Status 03:18:29 INFO] reading housekeeping
[Status 03:18:47 INFO] acquire complete
[Status 03:18:47 INFO] writing housekeeping
[Sequencer 03:18:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:18:47 INFO] incremented A scene to 62 completed views
[Sequencer 03:18:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:18:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:18:47 INFO] incremented to [AERI set: name H62, 6 scans, 60 angle, D22500 command] set
[sigmove 03:18:47 INFO] A62.SIG(18)
[sigmove 03:18:47 DEBUG] transformed A62Ma.SPC -> A62MA.SPC
[sigmove 03:18:47 DEBUG] transformed A62Mb.SPC -> A62MB.SPC
[sigmove 03:18:47 DEBUG] transformed A62Mc.SPC -> A62MC.SPC
[sigmove 03:18:47 DEBUG] transformed A62Md.SPC -> A62MD.SPC
[sigmove 03:18:47 DEBUG] transformed A62Me.SPC -> A62ME.SPC
[sigmove 03:18:47 DEBUG] transformed A62Mf.SPC -> A62MF.SPC
[Status 03:18:47 INFO] data for A62 transferred to science data processing
[Tidy 03:18:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:18:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:18:47 INFO] resetting WatchDogTimer
[Status 03:18:47 INFO] Starting Set [AERI set: name H62, 6 scans, 60 angle, D22500 command]
[Ingest 03:18:47 INFO] Sending XML status message
[Status 03:18:47 INFO] Mirror angle: 60
[Mirror 03:18:47 INFO] rotating to position H
[Status 03:18:48 INFO] .SET file for ACQ96 ready
[Ingest 03:18:48 INFO] Starting acquisition
[Status 03:18:48 INFO] reading housekeeping
[Status 03:19:06 INFO] acquire complete
[Status 03:19:06 INFO] writing housekeeping
[Sequencer 03:19:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:19:06 INFO] incremented H scene to 62 completed views
[Sequencer 03:19:06 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:19:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:19:06 INFO] incremented to [AERI set: name S62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:19:06 INFO] H62.SIG(18)
[sigmove 03:19:06 DEBUG] transformed H62Ma.SPC -> H62MA.SPC
[sigmove 03:19:06 DEBUG] transformed H62Mb.SPC -> H62MB.SPC
[sigmove 03:19:06 DEBUG] transformed H62Mc.SPC -> H62MC.SPC
[sigmove 03:19:06 DEBUG] transformed H62Md.SPC -> H62MD.SPC
[sigmove 03:19:06 DEBUG] transformed H62Me.SPC -> H62ME.SPC
[sigmove 03:19:06 DEBUG] transformed H62Mf.SPC -> H62MF.SPC
[Status 03:19:06 INFO] data for H62 transferred to science data processing
[Tidy 03:19:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:19:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:19:06 INFO] resetting WatchDogTimer
[Status 03:19:06 INFO] Starting Set [AERI set: name S62, 6 scans, 0 angle, D16300 command]
[Ingest 03:19:06 INFO] Sending XML status message
[Status 03:19:06 INFO] Mirror angle: 0
[Mirror 03:19:06 INFO] rotating to position S
[Status 03:19:07 INFO] .SET file for ACQ96 ready
[Ingest 03:19:07 INFO] Starting acquisition
[Status 03:19:07 INFO] reading housekeeping
[Status 03:19:25 INFO] acquire complete
[Status 03:19:25 INFO] writing housekeeping
[Sequencer 03:19:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:19:25 INFO] incremented S scene to 62 completed views
[Sequencer 03:19:25 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:19:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:19:25 INFO] incremented to [AERI set: name T62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:19:25 INFO] S62.SIG(18)
[sigmove 03:19:25 DEBUG] transformed S62Ma.SPC -> S62MA.SPC
[sigmove 03:19:25 DEBUG] transformed S62Mb.SPC -> S62MB.SPC
[sigmove 03:19:25 DEBUG] transformed S62Mc.SPC -> S62MC.SPC
[sigmove 03:19:25 DEBUG] transformed S62Md.SPC -> S62MD.SPC
[sigmove 03:19:25 DEBUG] transformed S62Me.SPC -> S62ME.SPC
[sigmove 03:19:25 DEBUG] transformed S62Mf.SPC -> S62MF.SPC
[Status 03:19:25 INFO] data for S62 transferred to science data processing
[Tidy 03:19:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:19:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:19:25 INFO] resetting WatchDogTimer
[Status 03:19:25 INFO] Starting Set [AERI set: name T62, 6 scans, 0 angle, D16300 command]
[Ingest 03:19:25 INFO] Sending XML status message
[Status 03:19:25 INFO] Mirror angle: 0
[Mirror 03:19:26 INFO] rotating to position T
[Status 03:19:26 INFO] .SET file for ACQ96 ready
[Ingest 03:19:26 INFO] Starting acquisition
[Status 03:19:26 INFO] reading housekeeping
[Status 03:19:44 INFO] acquire complete
[Status 03:19:44 INFO] writing housekeeping
[Sequencer 03:19:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:19:44 INFO] incremented T scene to 62 completed views
[Sequencer 03:19:44 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:19:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:19:44 INFO] incremented to [AERI set: name U62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:19:44 INFO] T62.SIG(18)
[sigmove 03:19:44 DEBUG] transformed T62Ma.SPC -> T62MA.SPC
[sigmove 03:19:44 DEBUG] transformed T62Mb.SPC -> T62MB.SPC
[sigmove 03:19:44 DEBUG] transformed T62Mc.SPC -> T62MC.SPC
[sigmove 03:19:44 DEBUG] transformed T62Md.SPC -> T62MD.SPC
[sigmove 03:19:44 DEBUG] transformed T62Me.SPC -> T62ME.SPC
[sigmove 03:19:44 DEBUG] transformed T62Mf.SPC -> T62MF.SPC
[Status 03:19:44 INFO] data for T62 transferred to science data processing
[Tidy 03:19:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:19:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:19:44 INFO] resetting WatchDogTimer
[Status 03:19:44 INFO] Starting Set [AERI set: name U62, 6 scans, 0 angle, D16300 command]
[Ingest 03:19:44 INFO] Sending XML status message
[Status 03:19:44 INFO] Mirror angle: 0
[Mirror 03:19:45 INFO] rotating to position U
[Status 03:19:45 INFO] .SET file for ACQ96 ready
[Ingest 03:19:45 INFO] Starting acquisition
[Status 03:19:45 INFO] reading housekeeping
[Status 03:20:03 INFO] acquire complete
[Status 03:20:03 INFO] writing housekeeping
[Sequencer 03:20:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:20:03 INFO] incremented U scene to 62 completed views
[Sequencer 03:20:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:20:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:20:03 INFO] incremented to [AERI set: name V62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:20:03 INFO] U62.SIG(18)
[sigmove 03:20:03 DEBUG] transformed U62Ma.SPC -> U62MA.SPC
[sigmove 03:20:03 DEBUG] transformed U62Mb.SPC -> U62MB.SPC
[sigmove 03:20:03 DEBUG] transformed U62Mc.SPC -> U62MC.SPC
[sigmove 03:20:03 DEBUG] transformed U62Md.SPC -> U62MD.SPC
[sigmove 03:20:03 DEBUG] transformed U62Me.SPC -> U62ME.SPC
[sigmove 03:20:03 DEBUG] transformed U62Mf.SPC -> U62MF.SPC
[Status 03:20:03 INFO] data for U62 transferred to science data processing
[Tidy 03:20:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:20:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:20:03 INFO] resetting WatchDogTimer
[Status 03:20:04 INFO] Starting Set [AERI set: name V62, 6 scans, 0 angle, D16300 command]
[Ingest 03:20:04 INFO] Sending XML status message
[Status 03:20:04 INFO] Mirror angle: 0
[Mirror 03:20:04 INFO] rotating to position V
[Status 03:20:04 INFO] .SET file for ACQ96 ready
[Ingest 03:20:04 INFO] Starting acquisition
[Status 03:20:04 INFO] reading housekeeping
[Status 03:20:22 INFO] acquire complete
[Status 03:20:22 INFO] writing housekeeping
[Sequencer 03:20:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:20:22 INFO] incremented V scene to 62 completed views
[Sequencer 03:20:22 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:20:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:20:22 INFO] incremented to [AERI set: name W62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:20:22 INFO] V62.SIG(18)
[sigmove 03:20:22 DEBUG] transformed V62Ma.SPC -> V62MA.SPC
[sigmove 03:20:23 DEBUG] transformed V62Mb.SPC -> V62MB.SPC
[sigmove 03:20:23 DEBUG] transformed V62Mc.SPC -> V62MC.SPC
[sigmove 03:20:23 DEBUG] transformed V62Md.SPC -> V62MD.SPC
[sigmove 03:20:23 DEBUG] transformed V62Me.SPC -> V62ME.SPC
[sigmove 03:20:23 DEBUG] transformed V62Mf.SPC -> V62MF.SPC
[Status 03:20:23 INFO] data for V62 transferred to science data processing
[Tidy 03:20:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:20:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:20:23 INFO] resetting WatchDogTimer
[Status 03:20:23 INFO] Starting Set [AERI set: name W62, 6 scans, 0 angle, D16300 command]
[Ingest 03:20:23 INFO] Sending XML status message
[Status 03:20:23 INFO] Mirror angle: 0
[Mirror 03:20:23 INFO] rotating to position W
[Status 03:20:23 INFO] .SET file for ACQ96 ready
[Ingest 03:20:23 INFO] Starting acquisition
[Status 03:20:23 INFO] reading housekeeping
[Status 03:20:41 INFO] acquire complete
[Status 03:20:42 INFO] writing housekeeping
[Sequencer 03:20:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:20:42 INFO] incremented W scene to 62 completed views
[Sequencer 03:20:42 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:20:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:20:42 INFO] incremented to [AERI set: name X62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:20:42 INFO] W62.SIG(18)
[sigmove 03:20:42 DEBUG] transformed W62Ma.SPC -> W62MA.SPC
[sigmove 03:20:42 DEBUG] transformed W62Mb.SPC -> W62MB.SPC
[sigmove 03:20:42 DEBUG] transformed W62Mc.SPC -> W62MC.SPC
[sigmove 03:20:42 DEBUG] transformed W62Md.SPC -> W62MD.SPC
[sigmove 03:20:42 DEBUG] transformed W62Me.SPC -> W62ME.SPC
[sigmove 03:20:42 DEBUG] transformed W62Mf.SPC -> W62MF.SPC
[Status 03:20:42 INFO] data for W62 transferred to science data processing
[Tidy 03:20:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:20:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:20:42 INFO] resetting WatchDogTimer
[Status 03:20:42 INFO] Starting Set [AERI set: name X62, 6 scans, 0 angle, D16300 command]
[Ingest 03:20:42 INFO] Sending XML status message
[Status 03:20:42 INFO] Mirror angle: 0
[Mirror 03:20:42 INFO] rotating to position X
[Status 03:20:42 INFO] .SET file for ACQ96 ready
[Ingest 03:20:42 INFO] Starting acquisition
[Status 03:20:42 INFO] reading housekeeping
[Status 03:21:00 INFO] acquire complete
[Status 03:21:01 INFO] writing housekeeping
[Sequencer 03:21:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:21:01 INFO] incremented X scene to 62 completed views
[Sequencer 03:21:01 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:21:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:21:01 INFO] incremented to [AERI set: name Y62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:21:01 INFO] X62.SIG(18)
[sigmove 03:21:01 DEBUG] transformed X62Ma.SPC -> X62MA.SPC
[sigmove 03:21:01 DEBUG] transformed X62Mb.SPC -> X62MB.SPC
[sigmove 03:21:01 DEBUG] transformed X62Mc.SPC -> X62MC.SPC
[sigmove 03:21:01 DEBUG] transformed X62Md.SPC -> X62MD.SPC
[sigmove 03:21:01 DEBUG] transformed X62Me.SPC -> X62ME.SPC
[sigmove 03:21:01 DEBUG] transformed X62Mf.SPC -> X62MF.SPC
[Status 03:21:01 INFO] data for X62 transferred to science data processing
[Tidy 03:21:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:21:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:21:01 INFO] resetting WatchDogTimer
[Status 03:21:01 INFO] Starting Set [AERI set: name Y62, 6 scans, 0 angle, D16300 command]
[Ingest 03:21:01 INFO] Sending XML status message
[Status 03:21:01 INFO] Mirror angle: 0
[Mirror 03:21:01 INFO] rotating to position Y
[Status 03:21:01 INFO] .SET file for ACQ96 ready
[Ingest 03:21:01 INFO] Starting acquisition
[Status 03:21:01 INFO] reading housekeeping
[Status 03:21:19 INFO] acquire complete
[Status 03:21:20 INFO] writing housekeeping
[Sequencer 03:21:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:21:20 INFO] incremented Y scene to 62 completed views
[Sequencer 03:21:20 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:21:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:21:20 INFO] incremented to [AERI set: name Z62, 6 scans, 0 angle, D16300 command] set
[sigmove 03:21:20 INFO] Y62.SIG(18)
[sigmove 03:21:20 DEBUG] transformed Y62Ma.SPC -> Y62MA.SPC
[sigmove 03:21:20 DEBUG] transformed Y62Mb.SPC -> Y62MB.SPC
[sigmove 03:21:20 DEBUG] transformed Y62Mc.SPC -> Y62MC.SPC
[sigmove 03:21:20 DEBUG] transformed Y62Md.SPC -> Y62MD.SPC
[sigmove 03:21:20 DEBUG] transformed Y62Me.SPC -> Y62ME.SPC
[sigmove 03:21:20 DEBUG] transformed Y62Mf.SPC -> Y62MF.SPC
[Status 03:21:20 INFO] data for Y62 transferred to science data processing
[Tidy 03:21:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:21:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:21:20 INFO] resetting WatchDogTimer
[Status 03:21:20 INFO] Starting Set [AERI set: name Z62, 6 scans, 0 angle, D16300 command]
[Ingest 03:21:20 INFO] Sending XML status message
[Status 03:21:20 INFO] Mirror angle: 0
[Mirror 03:21:20 INFO] rotating to position Z
[Status 03:21:20 INFO] .SET file for ACQ96 ready
[Ingest 03:21:20 INFO] Starting acquisition
[Status 03:21:20 INFO] reading housekeeping
[Status 03:21:38 INFO] acquire complete
[Status 03:21:39 INFO] writing housekeeping
[Sequencer 03:21:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:21:39 INFO] incremented Z scene to 62 completed views
[Sequencer 03:21:39 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:21:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:21:39 INFO] incremented to [AERI set: name H63, 6 scans, 60 angle, D22500 command] set
[sigmove 03:21:39 INFO] Z62.SIG(18)
[sigmove 03:21:39 DEBUG] transformed Z62Ma.SPC -> Z62MA.SPC
[sigmove 03:21:39 DEBUG] transformed Z62Mb.SPC -> Z62MB.SPC
[sigmove 03:21:39 DEBUG] transformed Z62Mc.SPC -> Z62MC.SPC
[sigmove 03:21:39 DEBUG] transformed Z62Md.SPC -> Z62MD.SPC
[sigmove 03:21:39 DEBUG] transformed Z62Me.SPC -> Z62ME.SPC
[sigmove 03:21:39 DEBUG] transformed Z62Mf.SPC -> Z62MF.SPC
[Status 03:21:39 INFO] data for Z62 transferred to science data processing
[Tidy 03:21:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:21:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:21:39 INFO] resetting WatchDogTimer
[Status 03:21:39 INFO] Starting Set [AERI set: name H63, 6 scans, 60 angle, D22500 command]
[Ingest 03:21:39 INFO] Sending XML status message
[Status 03:21:39 INFO] Mirror angle: 60
[Mirror 03:21:39 INFO] rotating to position H
[Status 03:21:40 INFO] .SET file for ACQ96 ready
[Ingest 03:21:40 INFO] Starting acquisition
[Status 03:21:40 INFO] reading housekeeping
[Status 03:21:58 INFO] acquire complete
[Status 03:21:58 INFO] writing housekeeping
[Sequencer 03:21:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:21:58 INFO] incremented H scene to 63 completed views
[Sequencer 03:21:58 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:21:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:21:58 INFO] incremented to [AERI set: name A63, 6 scans, 120 angle, D28300 command] set
[sigmove 03:21:58 INFO] H63.SIG(18)
[sigmove 03:21:58 DEBUG] transformed H63Ma.SPC -> H63MA.SPC
[sigmove 03:21:58 DEBUG] transformed H63Mb.SPC -> H63MB.SPC
[sigmove 03:21:58 DEBUG] transformed H63Mc.SPC -> H63MC.SPC
[sigmove 03:21:58 DEBUG] transformed H63Md.SPC -> H63MD.SPC
[sigmove 03:21:58 DEBUG] transformed H63Me.SPC -> H63ME.SPC
[sigmove 03:21:58 DEBUG] transformed H63Mf.SPC -> H63MF.SPC
[Status 03:21:58 INFO] data for H63 transferred to science data processing
[Tidy 03:21:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:21:58 INFO] A61.FIN(19),H61.FIN(19),S61.FIN(19),T61.FIN(19),U61.FIN(19),V61.FIN(19),W61.FIN(19),X61.FIN(19),Y61.FIN(19),Z61.FIN(19),A62.FIN(19),H62.FIN(19),S62.FIN(19),T62.FIN(19),U62.FIN(19),V62.FIN(19),W62.FIN(19),X62.FIN(19),Y62.FIN(19),Z62.FIN(19)
[sigmove 03:21:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:21:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:21:59 DEBUG] done zipping
[WatchDog 03:21:59 INFO] resetting WatchDogTimer
[Status 03:22:00 INFO] Starting Set [AERI set: name A63, 6 scans, 120 angle, D28300 command]
[Ingest 03:22:00 INFO] Sending XML status message
[Status 03:22:00 INFO] Mirror angle: 120
[Mirror 03:22:00 INFO] rotating to position A
[Status 03:22:00 INFO] .SET file for ACQ96 ready
[Ingest 03:22:00 INFO] Starting acquisition
[Status 03:22:01 INFO] reading housekeeping
[Status 03:22:19 INFO] acquire complete
[Status 03:22:19 INFO] writing housekeeping
[Sequencer 03:22:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:22:19 INFO] incremented A scene to 63 completed views
[Sequencer 03:22:19 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:22:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:22:19 INFO] incremented to [AERI set: name S63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:22:19 INFO] A63.SIG(18)
[sigmove 03:22:19 DEBUG] transformed A63Ma.SPC -> A63MA.SPC
[sigmove 03:22:19 DEBUG] transformed A63Mb.SPC -> A63MB.SPC
[sigmove 03:22:19 DEBUG] transformed A63Mc.SPC -> A63MC.SPC
[sigmove 03:22:19 DEBUG] transformed A63Md.SPC -> A63MD.SPC
[sigmove 03:22:19 DEBUG] transformed A63Me.SPC -> A63ME.SPC
[sigmove 03:22:19 DEBUG] transformed A63Mf.SPC -> A63MF.SPC
[Status 03:22:19 INFO] data for A63 transferred to science data processing
[Tidy 03:22:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:22:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:22:19 INFO] resetting WatchDogTimer
[Status 03:22:19 INFO] Starting Set [AERI set: name S63, 6 scans, 0 angle, D16300 command]
[Ingest 03:22:19 INFO] Sending XML status message
[Status 03:22:19 INFO] Mirror angle: 0
[Mirror 03:22:20 INFO] rotating to position S
[Status 03:22:21 INFO] .SET file for ACQ96 ready
[Ingest 03:22:21 INFO] Starting acquisition
[Status 03:22:21 INFO] reading housekeeping
[Status 03:22:39 INFO] acquire complete
[Status 03:22:39 INFO] writing housekeeping
[Sequencer 03:22:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:22:39 INFO] incremented S scene to 63 completed views
[Sequencer 03:22:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:22:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:22:39 INFO] incremented to [AERI set: name T63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:22:39 INFO] S63.SIG(18)
[sigmove 03:22:39 DEBUG] transformed S63Ma.SPC -> S63MA.SPC
[sigmove 03:22:39 DEBUG] transformed S63Mb.SPC -> S63MB.SPC
[sigmove 03:22:39 DEBUG] transformed S63Mc.SPC -> S63MC.SPC
[sigmove 03:22:39 DEBUG] transformed S63Md.SPC -> S63MD.SPC
[sigmove 03:22:39 DEBUG] transformed S63Me.SPC -> S63ME.SPC
[sigmove 03:22:39 DEBUG] transformed S63Mf.SPC -> S63MF.SPC
[Status 03:22:39 INFO] data for S63 transferred to science data processing
[Tidy 03:22:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:22:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:22:39 INFO] resetting WatchDogTimer
[Status 03:22:40 INFO] Starting Set [AERI set: name T63, 6 scans, 0 angle, D16300 command]
[Ingest 03:22:40 INFO] Sending XML status message
[Status 03:22:40 INFO] Mirror angle: 0
[Mirror 03:22:40 INFO] rotating to position T
[Status 03:22:40 INFO] .SET file for ACQ96 ready
[Ingest 03:22:40 INFO] Starting acquisition
[Status 03:22:40 INFO] reading housekeeping
[Status 03:22:58 INFO] acquire complete
[Status 03:22:59 INFO] writing housekeeping
[Sequencer 03:22:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:22:59 INFO] incremented T scene to 63 completed views
[Sequencer 03:22:59 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:22:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:22:59 INFO] incremented to [AERI set: name U63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:22:59 INFO] T63.SIG(18)
[sigmove 03:22:59 DEBUG] transformed T63Ma.SPC -> T63MA.SPC
[sigmove 03:22:59 DEBUG] transformed T63Mb.SPC -> T63MB.SPC
[sigmove 03:22:59 DEBUG] transformed T63Mc.SPC -> T63MC.SPC
[sigmove 03:22:59 DEBUG] transformed T63Md.SPC -> T63MD.SPC
[sigmove 03:22:59 DEBUG] transformed T63Me.SPC -> T63ME.SPC
[sigmove 03:22:59 DEBUG] transformed T63Mf.SPC -> T63MF.SPC
[Status 03:22:59 INFO] data for T63 transferred to science data processing
[Tidy 03:22:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:22:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:22:59 INFO] resetting WatchDogTimer
[Status 03:22:59 INFO] Starting Set [AERI set: name U63, 6 scans, 0 angle, D16300 command]
[Ingest 03:22:59 INFO] Sending XML status message
[Status 03:22:59 INFO] Mirror angle: 0
[Mirror 03:22:59 INFO] rotating to position U
[Status 03:22:59 INFO] .SET file for ACQ96 ready
[Ingest 03:22:59 INFO] Starting acquisition
[Status 03:22:59 INFO] reading housekeeping
[Status 03:23:17 INFO] acquire complete
[Status 03:23:18 INFO] writing housekeeping
[Sequencer 03:23:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:23:18 INFO] incremented U scene to 63 completed views
[Sequencer 03:23:18 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:23:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:23:18 INFO] incremented to [AERI set: name V63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:23:18 INFO] U63.SIG(18)
[sigmove 03:23:18 DEBUG] transformed U63Ma.SPC -> U63MA.SPC
[sigmove 03:23:18 DEBUG] transformed U63Mb.SPC -> U63MB.SPC
[sigmove 03:23:18 DEBUG] transformed U63Mc.SPC -> U63MC.SPC
[sigmove 03:23:18 DEBUG] transformed U63Md.SPC -> U63MD.SPC
[sigmove 03:23:18 DEBUG] transformed U63Me.SPC -> U63ME.SPC
[sigmove 03:23:18 DEBUG] transformed U63Mf.SPC -> U63MF.SPC
[Status 03:23:18 INFO] data for U63 transferred to science data processing
[Tidy 03:23:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:23:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:23:18 INFO] resetting WatchDogTimer
[Status 03:23:18 INFO] Starting Set [AERI set: name V63, 6 scans, 0 angle, D16300 command]
[Ingest 03:23:18 INFO] Sending XML status message
[Status 03:23:18 INFO] Mirror angle: 0
[Mirror 03:23:18 INFO] rotating to position V
[Status 03:23:18 INFO] .SET file for ACQ96 ready
[Ingest 03:23:18 INFO] Starting acquisition
[Status 03:23:18 INFO] reading housekeeping
[Status 03:23:36 INFO] acquire complete
[Status 03:23:37 INFO] writing housekeeping
[Sequencer 03:23:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:23:37 INFO] incremented V scene to 63 completed views
[Sequencer 03:23:37 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:23:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:23:37 INFO] incremented to [AERI set: name W63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:23:37 INFO] V63.SIG(18)
[sigmove 03:23:37 DEBUG] transformed V63Ma.SPC -> V63MA.SPC
[sigmove 03:23:37 DEBUG] transformed V63Mb.SPC -> V63MB.SPC
[sigmove 03:23:37 DEBUG] transformed V63Mc.SPC -> V63MC.SPC
[sigmove 03:23:37 DEBUG] transformed V63Md.SPC -> V63MD.SPC
[sigmove 03:23:37 DEBUG] transformed V63Me.SPC -> V63ME.SPC
[sigmove 03:23:37 DEBUG] transformed V63Mf.SPC -> V63MF.SPC
[Status 03:23:37 INFO] data for V63 transferred to science data processing
[Tidy 03:23:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:23:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:23:37 INFO] resetting WatchDogTimer
[Status 03:23:37 INFO] Starting Set [AERI set: name W63, 6 scans, 0 angle, D16300 command]
[Ingest 03:23:37 INFO] Sending XML status message
[Status 03:23:37 INFO] Mirror angle: 0
[Mirror 03:23:37 INFO] rotating to position W
[Status 03:23:37 INFO] .SET file for ACQ96 ready
[Ingest 03:23:37 INFO] Starting acquisition
[Status 03:23:37 INFO] reading housekeeping
[Status 03:23:55 INFO] acquire complete
[Status 03:23:56 INFO] writing housekeeping
[Sequencer 03:23:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:23:56 INFO] incremented W scene to 63 completed views
[Sequencer 03:23:56 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:23:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:23:56 INFO] incremented to [AERI set: name X63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:23:56 INFO] W63.SIG(18)
[sigmove 03:23:56 DEBUG] transformed W63Ma.SPC -> W63MA.SPC
[sigmove 03:23:56 DEBUG] transformed W63Mb.SPC -> W63MB.SPC
[sigmove 03:23:56 DEBUG] transformed W63Mc.SPC -> W63MC.SPC
[sigmove 03:23:56 DEBUG] transformed W63Md.SPC -> W63MD.SPC
[sigmove 03:23:56 DEBUG] transformed W63Me.SPC -> W63ME.SPC
[sigmove 03:23:56 DEBUG] transformed W63Mf.SPC -> W63MF.SPC
[Status 03:23:56 INFO] data for W63 transferred to science data processing
[Tidy 03:23:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:23:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:23:56 INFO] resetting WatchDogTimer
[Status 03:23:56 INFO] Starting Set [AERI set: name X63, 6 scans, 0 angle, D16300 command]
[Ingest 03:23:56 INFO] Sending XML status message
[Status 03:23:56 INFO] Mirror angle: 0
[Mirror 03:23:56 INFO] rotating to position X
[Status 03:23:56 INFO] .SET file for ACQ96 ready
[Ingest 03:23:56 INFO] Starting acquisition
[Status 03:23:56 INFO] reading housekeeping
[Status 03:24:14 INFO] acquire complete
[Status 03:24:15 INFO] writing housekeeping
[Sequencer 03:24:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:24:15 INFO] incremented X scene to 63 completed views
[Sequencer 03:24:15 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:24:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:24:15 INFO] incremented to [AERI set: name Y63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:24:15 INFO] X63.SIG(18)
[sigmove 03:24:15 DEBUG] transformed X63Ma.SPC -> X63MA.SPC
[sigmove 03:24:15 DEBUG] transformed X63Mb.SPC -> X63MB.SPC
[sigmove 03:24:15 DEBUG] transformed X63Mc.SPC -> X63MC.SPC
[sigmove 03:24:15 DEBUG] transformed X63Md.SPC -> X63MD.SPC
[sigmove 03:24:15 DEBUG] transformed X63Me.SPC -> X63ME.SPC
[sigmove 03:24:15 DEBUG] transformed X63Mf.SPC -> X63MF.SPC
[Status 03:24:15 INFO] data for X63 transferred to science data processing
[Tidy 03:24:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:24:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:24:15 INFO] resetting WatchDogTimer
[Status 03:24:15 INFO] Starting Set [AERI set: name Y63, 6 scans, 0 angle, D16300 command]
[Ingest 03:24:15 INFO] Sending XML status message
[Status 03:24:15 INFO] Mirror angle: 0
[Mirror 03:24:15 INFO] rotating to position Y
[Status 03:24:15 INFO] .SET file for ACQ96 ready
[Ingest 03:24:15 INFO] Starting acquisition
[Status 03:24:16 INFO] reading housekeeping
[Status 03:24:34 INFO] acquire complete
[Status 03:24:34 INFO] writing housekeeping
[Sequencer 03:24:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:24:34 INFO] incremented Y scene to 63 completed views
[Sequencer 03:24:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:24:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:24:34 INFO] incremented to [AERI set: name Z63, 6 scans, 0 angle, D16300 command] set
[sigmove 03:24:34 INFO] Y63.SIG(18)
[sigmove 03:24:34 DEBUG] transformed Y63Ma.SPC -> Y63MA.SPC
[sigmove 03:24:34 DEBUG] transformed Y63Mb.SPC -> Y63MB.SPC
[sigmove 03:24:34 DEBUG] transformed Y63Mc.SPC -> Y63MC.SPC
[sigmove 03:24:34 DEBUG] transformed Y63Md.SPC -> Y63MD.SPC
[sigmove 03:24:34 DEBUG] transformed Y63Me.SPC -> Y63ME.SPC
[sigmove 03:24:34 DEBUG] transformed Y63Mf.SPC -> Y63MF.SPC
[Status 03:24:34 INFO] data for Y63 transferred to science data processing
[Tidy 03:24:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:24:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:24:34 INFO] resetting WatchDogTimer
[Status 03:24:34 INFO] Starting Set [AERI set: name Z63, 6 scans, 0 angle, D16300 command]
[Ingest 03:24:34 INFO] Sending XML status message
[Status 03:24:34 INFO] Mirror angle: 0
[Mirror 03:24:34 INFO] rotating to position Z
[Status 03:24:34 INFO] .SET file for ACQ96 ready
[Ingest 03:24:35 INFO] Starting acquisition
[Status 03:24:35 INFO] reading housekeeping
[Status 03:24:53 INFO] acquire complete
[Status 03:24:53 INFO] writing housekeeping
[Sequencer 03:24:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:24:53 INFO] incremented Z scene to 63 completed views
[Sequencer 03:24:53 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:24:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:24:53 INFO] incremented to [AERI set: name A64, 6 scans, 120 angle, D28300 command] set
[sigmove 03:24:53 INFO] Z63.SIG(18)
[sigmove 03:24:53 DEBUG] transformed Z63Ma.SPC -> Z63MA.SPC
[sigmove 03:24:53 DEBUG] transformed Z63Mb.SPC -> Z63MB.SPC
[sigmove 03:24:53 DEBUG] transformed Z63Mc.SPC -> Z63MC.SPC
[sigmove 03:24:53 DEBUG] transformed Z63Md.SPC -> Z63MD.SPC
[sigmove 03:24:53 DEBUG] transformed Z63Me.SPC -> Z63ME.SPC
[sigmove 03:24:53 DEBUG] transformed Z63Mf.SPC -> Z63MF.SPC
[Status 03:24:53 INFO] data for Z63 transferred to science data processing
[Tidy 03:24:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:24:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:24:53 INFO] resetting WatchDogTimer
[Status 03:24:53 INFO] Starting Set [AERI set: name A64, 6 scans, 120 angle, D28300 command]
[Ingest 03:24:53 INFO] Sending XML status message
[Status 03:24:53 INFO] Mirror angle: 120
[Mirror 03:24:53 INFO] rotating to position A
[Status 03:24:55 INFO] .SET file for ACQ96 ready
[Ingest 03:24:55 INFO] Starting acquisition
[Status 03:24:55 INFO] reading housekeeping
[Status 03:25:13 INFO] acquire complete
[Status 03:25:13 INFO] writing housekeeping
[Sequencer 03:25:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:25:13 INFO] incremented A scene to 64 completed views
[Sequencer 03:25:13 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:25:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:25:13 INFO] incremented to [AERI set: name H64, 6 scans, 60 angle, D22500 command] set
[sigmove 03:25:13 INFO] A64.SIG(18)
[sigmove 03:25:13 DEBUG] transformed A64Ma.SPC -> A64MA.SPC
[sigmove 03:25:13 DEBUG] transformed A64Mb.SPC -> A64MB.SPC
[sigmove 03:25:13 DEBUG] transformed A64Mc.SPC -> A64MC.SPC
[sigmove 03:25:13 DEBUG] transformed A64Md.SPC -> A64MD.SPC
[sigmove 03:25:13 DEBUG] transformed A64Me.SPC -> A64ME.SPC
[sigmove 03:25:13 DEBUG] transformed A64Mf.SPC -> A64MF.SPC
[Status 03:25:13 INFO] data for A64 transferred to science data processing
[Tidy 03:25:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:25:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:25:13 INFO] resetting WatchDogTimer
[Status 03:25:13 INFO] Starting Set [AERI set: name H64, 6 scans, 60 angle, D22500 command]
[Ingest 03:25:13 INFO] Sending XML status message
[Status 03:25:13 INFO] Mirror angle: 60
[Mirror 03:25:14 INFO] rotating to position H
[Status 03:25:14 INFO] .SET file for ACQ96 ready
[Ingest 03:25:14 INFO] Starting acquisition
[Status 03:25:15 INFO] reading housekeeping
[Status 03:25:32 INFO] acquire complete
[Status 03:25:32 INFO] writing housekeeping
[Sequencer 03:25:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:25:32 INFO] incremented H scene to 64 completed views
[Sequencer 03:25:32 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:25:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:25:32 INFO] incremented to [AERI set: name S64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:25:32 INFO] H64.SIG(18)
[sigmove 03:25:32 DEBUG] transformed H64Ma.SPC -> H64MA.SPC
[sigmove 03:25:32 DEBUG] transformed H64Mb.SPC -> H64MB.SPC
[sigmove 03:25:32 DEBUG] transformed H64Mc.SPC -> H64MC.SPC
[sigmove 03:25:32 DEBUG] transformed H64Md.SPC -> H64MD.SPC
[sigmove 03:25:32 DEBUG] transformed H64Me.SPC -> H64ME.SPC
[sigmove 03:25:32 DEBUG] transformed H64Mf.SPC -> H64MF.SPC
[Status 03:25:32 INFO] data for H64 transferred to science data processing
[Tidy 03:25:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:25:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:25:32 INFO] resetting WatchDogTimer
[Status 03:25:32 INFO] Starting Set [AERI set: name S64, 6 scans, 0 angle, D16300 command]
[Ingest 03:25:32 INFO] Sending XML status message
[Status 03:25:32 INFO] Mirror angle: 0
[Mirror 03:25:33 INFO] rotating to position S
[Status 03:25:33 INFO] .SET file for ACQ96 ready
[Ingest 03:25:33 INFO] Starting acquisition
[Status 03:25:34 INFO] reading housekeeping
[Status 03:25:51 INFO] acquire complete
[Status 03:25:51 INFO] writing housekeeping
[Sequencer 03:25:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:25:51 INFO] incremented S scene to 64 completed views
[Sequencer 03:25:51 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:25:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:25:51 INFO] incremented to [AERI set: name T64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:25:51 INFO] S64.SIG(18)
[sigmove 03:25:51 DEBUG] transformed S64Ma.SPC -> S64MA.SPC
[sigmove 03:25:51 DEBUG] transformed S64Mb.SPC -> S64MB.SPC
[sigmove 03:25:51 DEBUG] transformed S64Mc.SPC -> S64MC.SPC
[sigmove 03:25:51 DEBUG] transformed S64Md.SPC -> S64MD.SPC
[sigmove 03:25:51 DEBUG] transformed S64Me.SPC -> S64ME.SPC
[sigmove 03:25:51 DEBUG] transformed S64Mf.SPC -> S64MF.SPC
[Status 03:25:51 INFO] data for S64 transferred to science data processing
[Tidy 03:25:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:25:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:25:51 INFO] resetting WatchDogTimer
[Status 03:25:52 INFO] Starting Set [AERI set: name T64, 6 scans, 0 angle, D16300 command]
[Ingest 03:25:52 INFO] Sending XML status message
[Status 03:25:52 INFO] Mirror angle: 0
[Mirror 03:25:52 INFO] rotating to position T
[Status 03:25:52 INFO] .SET file for ACQ96 ready
[Ingest 03:25:52 INFO] Starting acquisition
[Status 03:25:52 INFO] reading housekeeping
[Status 03:26:10 INFO] acquire complete
[Status 03:26:11 INFO] writing housekeeping
[Sequencer 03:26:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:26:11 INFO] incremented T scene to 64 completed views
[Sequencer 03:26:11 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:26:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:26:11 INFO] incremented to [AERI set: name U64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:26:11 INFO] T64.SIG(18)
[sigmove 03:26:11 DEBUG] transformed T64Ma.SPC -> T64MA.SPC
[sigmove 03:26:11 DEBUG] transformed T64Mb.SPC -> T64MB.SPC
[sigmove 03:26:11 DEBUG] transformed T64Mc.SPC -> T64MC.SPC
[sigmove 03:26:11 DEBUG] transformed T64Md.SPC -> T64MD.SPC
[sigmove 03:26:11 DEBUG] transformed T64Me.SPC -> T64ME.SPC
[sigmove 03:26:11 DEBUG] transformed T64Mf.SPC -> T64MF.SPC
[Status 03:26:11 INFO] data for T64 transferred to science data processing
[Tidy 03:26:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:26:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:26:11 INFO] resetting WatchDogTimer
[Status 03:26:11 INFO] Starting Set [AERI set: name U64, 6 scans, 0 angle, D16300 command]
[Ingest 03:26:11 INFO] Sending XML status message
[Status 03:26:11 INFO] Mirror angle: 0
[Mirror 03:26:11 INFO] rotating to position U
[Status 03:26:11 INFO] .SET file for ACQ96 ready
[Ingest 03:26:11 INFO] Starting acquisition
[Status 03:26:11 INFO] reading housekeeping
[Status 03:26:29 INFO] acquire complete
[Status 03:26:30 INFO] writing housekeeping
[Sequencer 03:26:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:26:30 INFO] incremented U scene to 64 completed views
[Sequencer 03:26:30 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:26:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:26:30 INFO] incremented to [AERI set: name V64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:26:30 INFO] U64.SIG(18)
[sigmove 03:26:30 DEBUG] transformed U64Ma.SPC -> U64MA.SPC
[sigmove 03:26:30 DEBUG] transformed U64Mb.SPC -> U64MB.SPC
[sigmove 03:26:30 DEBUG] transformed U64Mc.SPC -> U64MC.SPC
[sigmove 03:26:30 DEBUG] transformed U64Md.SPC -> U64MD.SPC
[sigmove 03:26:30 DEBUG] transformed U64Me.SPC -> U64ME.SPC
[sigmove 03:26:30 DEBUG] transformed U64Mf.SPC -> U64MF.SPC
[Status 03:26:30 INFO] data for U64 transferred to science data processing
[Tidy 03:26:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:26:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:26:30 INFO] resetting WatchDogTimer
[Status 03:26:30 INFO] Starting Set [AERI set: name V64, 6 scans, 0 angle, D16300 command]
[Ingest 03:26:30 INFO] Sending XML status message
[Status 03:26:30 INFO] Mirror angle: 0
[Mirror 03:26:30 INFO] rotating to position V
[Status 03:26:30 INFO] .SET file for ACQ96 ready
[Ingest 03:26:30 INFO] Starting acquisition
[Status 03:26:30 INFO] reading housekeeping
[Status 03:26:48 INFO] acquire complete
[Status 03:26:49 INFO] writing housekeeping
[Sequencer 03:26:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:26:49 INFO] incremented V scene to 64 completed views
[Sequencer 03:26:49 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:26:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:26:49 INFO] incremented to [AERI set: name W64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:26:49 INFO] V64.SIG(18)
[sigmove 03:26:49 DEBUG] transformed V64Ma.SPC -> V64MA.SPC
[sigmove 03:26:49 DEBUG] transformed V64Mb.SPC -> V64MB.SPC
[sigmove 03:26:49 DEBUG] transformed V64Mc.SPC -> V64MC.SPC
[sigmove 03:26:49 DEBUG] transformed V64Md.SPC -> V64MD.SPC
[sigmove 03:26:49 DEBUG] transformed V64Me.SPC -> V64ME.SPC
[sigmove 03:26:49 DEBUG] transformed V64Mf.SPC -> V64MF.SPC
[Status 03:26:49 INFO] data for V64 transferred to science data processing
[Tidy 03:26:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:26:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:26:49 INFO] resetting WatchDogTimer
[Status 03:26:49 INFO] Starting Set [AERI set: name W64, 6 scans, 0 angle, D16300 command]
[Ingest 03:26:49 INFO] Sending XML status message
[Status 03:26:49 INFO] Mirror angle: 0
[Mirror 03:26:49 INFO] rotating to position W
[Status 03:26:49 INFO] .SET file for ACQ96 ready
[Ingest 03:26:49 INFO] Starting acquisition
[Status 03:26:49 INFO] reading housekeeping
[Status 03:27:07 INFO] acquire complete
[Status 03:27:08 INFO] writing housekeeping
[Sequencer 03:27:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:27:08 INFO] incremented W scene to 64 completed views
[Sequencer 03:27:08 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:27:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:27:08 INFO] incremented to [AERI set: name X64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:27:08 INFO] W64.SIG(18)
[sigmove 03:27:08 DEBUG] transformed W64Ma.SPC -> W64MA.SPC
[sigmove 03:27:08 DEBUG] transformed W64Mb.SPC -> W64MB.SPC
[sigmove 03:27:08 DEBUG] transformed W64Mc.SPC -> W64MC.SPC
[sigmove 03:27:08 DEBUG] transformed W64Md.SPC -> W64MD.SPC
[sigmove 03:27:08 DEBUG] transformed W64Me.SPC -> W64ME.SPC
[sigmove 03:27:08 DEBUG] transformed W64Mf.SPC -> W64MF.SPC
[Status 03:27:08 INFO] data for W64 transferred to science data processing
[Tidy 03:27:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:27:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:27:08 INFO] resetting WatchDogTimer
[Status 03:27:08 INFO] Starting Set [AERI set: name X64, 6 scans, 0 angle, D16300 command]
[Ingest 03:27:08 INFO] Sending XML status message
[Status 03:27:08 INFO] Mirror angle: 0
[Mirror 03:27:08 INFO] rotating to position X
[Status 03:27:08 INFO] .SET file for ACQ96 ready
[Ingest 03:27:08 INFO] Starting acquisition
[Status 03:27:09 INFO] reading housekeeping
[Status 03:27:26 INFO] acquire complete
[Status 03:27:27 INFO] writing housekeeping
[Sequencer 03:27:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:27:27 INFO] incremented X scene to 64 completed views
[Sequencer 03:27:27 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:27:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:27:27 INFO] incremented to [AERI set: name Y64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:27:27 INFO] X64.SIG(18)
[sigmove 03:27:27 DEBUG] transformed X64Ma.SPC -> X64MA.SPC
[sigmove 03:27:27 DEBUG] transformed X64Mb.SPC -> X64MB.SPC
[sigmove 03:27:27 DEBUG] transformed X64Mc.SPC -> X64MC.SPC
[sigmove 03:27:27 DEBUG] transformed X64Md.SPC -> X64MD.SPC
[sigmove 03:27:27 DEBUG] transformed X64Me.SPC -> X64ME.SPC
[sigmove 03:27:27 DEBUG] transformed X64Mf.SPC -> X64MF.SPC
[Status 03:27:27 INFO] data for X64 transferred to science data processing
[Tidy 03:27:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:27:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:27:27 INFO] resetting WatchDogTimer
[Status 03:27:27 INFO] Starting Set [AERI set: name Y64, 6 scans, 0 angle, D16300 command]
[Ingest 03:27:27 INFO] Sending XML status message
[Status 03:27:27 INFO] Mirror angle: 0
[Mirror 03:27:27 INFO] rotating to position Y
[Status 03:27:27 INFO] .SET file for ACQ96 ready
[Ingest 03:27:27 INFO] Starting acquisition
[Status 03:27:28 INFO] reading housekeeping
[Status 03:27:46 INFO] acquire complete
[Status 03:27:46 INFO] writing housekeeping
[Sequencer 03:27:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:27:46 INFO] incremented Y scene to 64 completed views
[Sequencer 03:27:46 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:27:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:27:46 INFO] incremented to [AERI set: name Z64, 6 scans, 0 angle, D16300 command] set
[sigmove 03:27:46 INFO] Y64.SIG(18)
[sigmove 03:27:46 DEBUG] transformed Y64Ma.SPC -> Y64MA.SPC
[sigmove 03:27:46 DEBUG] transformed Y64Mb.SPC -> Y64MB.SPC
[sigmove 03:27:46 DEBUG] transformed Y64Mc.SPC -> Y64MC.SPC
[sigmove 03:27:46 DEBUG] transformed Y64Md.SPC -> Y64MD.SPC
[sigmove 03:27:46 DEBUG] transformed Y64Me.SPC -> Y64ME.SPC
[sigmove 03:27:46 DEBUG] transformed Y64Mf.SPC -> Y64MF.SPC
[Status 03:27:46 INFO] data for Y64 transferred to science data processing
[Tidy 03:27:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:27:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:27:46 INFO] resetting WatchDogTimer
[Status 03:27:46 INFO] Starting Set [AERI set: name Z64, 6 scans, 0 angle, D16300 command]
[Ingest 03:27:46 INFO] Sending XML status message
[Status 03:27:46 INFO] Mirror angle: 0
[Mirror 03:27:46 INFO] rotating to position Z
[Status 03:27:46 INFO] .SET file for ACQ96 ready
[Ingest 03:27:47 INFO] Starting acquisition
[Status 03:27:47 INFO] reading housekeeping
[Status 03:28:05 INFO] acquire complete
[Status 03:28:05 INFO] writing housekeeping
[Sequencer 03:28:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:28:05 INFO] incremented Z scene to 64 completed views
[Sequencer 03:28:05 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:28:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:28:05 INFO] incremented to [AERI set: name H65, 6 scans, 60 angle, D22500 command] set
[sigmove 03:28:05 INFO] Z64.SIG(18)
[sigmove 03:28:05 DEBUG] transformed Z64Ma.SPC -> Z64MA.SPC
[sigmove 03:28:05 DEBUG] transformed Z64Mb.SPC -> Z64MB.SPC
[sigmove 03:28:05 DEBUG] transformed Z64Mc.SPC -> Z64MC.SPC
[sigmove 03:28:05 DEBUG] transformed Z64Md.SPC -> Z64MD.SPC
[sigmove 03:28:05 DEBUG] transformed Z64Me.SPC -> Z64ME.SPC
[sigmove 03:28:05 DEBUG] transformed Z64Mf.SPC -> Z64MF.SPC
[Status 03:28:05 INFO] data for Z64 transferred to science data processing
[Tidy 03:28:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:28:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:28:05 INFO] resetting WatchDogTimer
[Status 03:28:05 INFO] Starting Set [AERI set: name H65, 6 scans, 60 angle, D22500 command]
[Ingest 03:28:05 INFO] Sending XML status message
[Status 03:28:05 INFO] Mirror angle: 60
[Mirror 03:28:05 INFO] rotating to position H
[Status 03:28:06 INFO] .SET file for ACQ96 ready
[Ingest 03:28:06 INFO] Starting acquisition
[Status 03:28:06 INFO] reading housekeeping
[Status 03:28:24 INFO] acquire complete
[Status 03:28:24 INFO] writing housekeeping
[Sequencer 03:28:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:28:24 INFO] incremented H scene to 65 completed views
[Sequencer 03:28:24 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:28:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:28:24 INFO] incremented to [AERI set: name A65, 6 scans, 120 angle, D28300 command] set
[sigmove 03:28:24 INFO] H65.SIG(18)
[sigmove 03:28:24 DEBUG] transformed H65Ma.SPC -> H65MA.SPC
[sigmove 03:28:24 DEBUG] transformed H65Mb.SPC -> H65MB.SPC
[sigmove 03:28:24 DEBUG] transformed H65Mc.SPC -> H65MC.SPC
[sigmove 03:28:24 DEBUG] transformed H65Md.SPC -> H65MD.SPC
[sigmove 03:28:24 DEBUG] transformed H65Me.SPC -> H65ME.SPC
[sigmove 03:28:24 DEBUG] transformed H65Mf.SPC -> H65MF.SPC
[Status 03:28:24 INFO] data for H65 transferred to science data processing
[Tidy 03:28:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:28:24 INFO] A63.FIN(19),H63.FIN(19),S63.FIN(19),T63.FIN(19),U63.FIN(19),V63.FIN(19),W63.FIN(19),X63.FIN(19),Y63.FIN(19),Z63.FIN(19),A64.FIN(19),H64.FIN(19),S64.FIN(19),T64.FIN(19),U64.FIN(19),V64.FIN(19),W64.FIN(19),X64.FIN(19),Y64.FIN(19),Z64.FIN(19)
[sigmove 03:28:24 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:28:24 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:28:26 DEBUG] done zipping
[WatchDog 03:28:26 INFO] resetting WatchDogTimer
[Status 03:28:26 INFO] Starting Set [AERI set: name A65, 6 scans, 120 angle, D28300 command]
[Ingest 03:28:26 INFO] Sending XML status message
[Status 03:28:26 INFO] Mirror angle: 120
[Mirror 03:28:27 INFO] rotating to position A
[Status 03:28:28 INFO] .SET file for ACQ96 ready
[Ingest 03:28:28 INFO] Starting acquisition
[Status 03:28:28 INFO] reading housekeeping
[Status 03:28:46 INFO] acquire complete
[Status 03:28:47 INFO] writing housekeeping
[Sequencer 03:28:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:28:47 INFO] incremented A scene to 65 completed views
[Sequencer 03:28:47 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:28:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:28:47 INFO] incremented to [AERI set: name S65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:28:47 INFO] A65.SIG(18)
[sigmove 03:28:47 DEBUG] transformed A65Ma.SPC -> A65MA.SPC
[sigmove 03:28:47 DEBUG] transformed A65Mb.SPC -> A65MB.SPC
[sigmove 03:28:47 DEBUG] transformed A65Mc.SPC -> A65MC.SPC
[sigmove 03:28:47 DEBUG] transformed A65Md.SPC -> A65MD.SPC
[sigmove 03:28:47 DEBUG] transformed A65Me.SPC -> A65ME.SPC
[sigmove 03:28:47 DEBUG] transformed A65Mf.SPC -> A65MF.SPC
[Status 03:28:47 INFO] data for A65 transferred to science data processing
[Tidy 03:28:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:28:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:28:47 INFO] resetting WatchDogTimer
[Status 03:28:47 INFO] Starting Set [AERI set: name S65, 6 scans, 0 angle, D16300 command]
[Ingest 03:28:47 INFO] Sending XML status message
[Status 03:28:47 INFO] Mirror angle: 0
[Mirror 03:28:47 INFO] rotating to position S
[Status 03:28:48 INFO] .SET file for ACQ96 ready
[Ingest 03:28:48 INFO] Starting acquisition
[Status 03:28:48 INFO] reading housekeeping
[Status 03:29:06 INFO] acquire complete
[Status 03:29:07 INFO] writing housekeeping
[Sequencer 03:29:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:29:07 INFO] incremented S scene to 65 completed views
[Sequencer 03:29:07 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:29:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:29:07 INFO] incremented to [AERI set: name T65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:29:07 INFO] S65.SIG(18)
[sigmove 03:29:07 DEBUG] transformed S65Ma.SPC -> S65MA.SPC
[sigmove 03:29:07 DEBUG] transformed S65Mb.SPC -> S65MB.SPC
[sigmove 03:29:07 DEBUG] transformed S65Mc.SPC -> S65MC.SPC
[sigmove 03:29:07 DEBUG] transformed S65Md.SPC -> S65MD.SPC
[sigmove 03:29:07 DEBUG] transformed S65Me.SPC -> S65ME.SPC
[sigmove 03:29:07 DEBUG] transformed S65Mf.SPC -> S65MF.SPC
[Status 03:29:07 INFO] data for S65 transferred to science data processing
[Tidy 03:29:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:29:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:29:07 INFO] resetting WatchDogTimer
[Status 03:29:07 INFO] Starting Set [AERI set: name T65, 6 scans, 0 angle, D16300 command]
[Ingest 03:29:07 INFO] Sending XML status message
[Status 03:29:07 INFO] Mirror angle: 0
[Mirror 03:29:07 INFO] rotating to position T
[Status 03:29:07 INFO] .SET file for ACQ96 ready
[Ingest 03:29:07 INFO] Starting acquisition
[Status 03:29:08 INFO] reading housekeeping
[Status 03:29:25 INFO] acquire complete
[Status 03:29:26 INFO] writing housekeeping
[Sequencer 03:29:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:29:26 INFO] incremented T scene to 65 completed views
[Sequencer 03:29:26 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:29:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:29:26 INFO] incremented to [AERI set: name U65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:29:26 INFO] T65.SIG(18)
[sigmove 03:29:26 DEBUG] transformed T65Ma.SPC -> T65MA.SPC
[sigmove 03:29:26 DEBUG] transformed T65Mb.SPC -> T65MB.SPC
[sigmove 03:29:26 DEBUG] transformed T65Mc.SPC -> T65MC.SPC
[sigmove 03:29:26 DEBUG] transformed T65Md.SPC -> T65MD.SPC
[sigmove 03:29:26 DEBUG] transformed T65Me.SPC -> T65ME.SPC
[sigmove 03:29:26 DEBUG] transformed T65Mf.SPC -> T65MF.SPC
[Status 03:29:26 INFO] data for T65 transferred to science data processing
[Tidy 03:29:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:29:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:29:26 INFO] resetting WatchDogTimer
[Status 03:29:26 INFO] Starting Set [AERI set: name U65, 6 scans, 0 angle, D16300 command]
[Ingest 03:29:26 INFO] Sending XML status message
[Status 03:29:26 INFO] Mirror angle: 0
[Mirror 03:29:26 INFO] rotating to position U
[Status 03:29:26 INFO] .SET file for ACQ96 ready
[Ingest 03:29:27 INFO] Starting acquisition
[Status 03:29:27 INFO] reading housekeeping
[Status 03:29:45 INFO] acquire complete
[Status 03:29:45 INFO] writing housekeeping
[Sequencer 03:29:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:29:45 INFO] incremented U scene to 65 completed views
[Sequencer 03:29:45 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:29:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:29:45 INFO] incremented to [AERI set: name V65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:29:45 INFO] U65.SIG(18)
[sigmove 03:29:45 DEBUG] transformed U65Ma.SPC -> U65MA.SPC
[sigmove 03:29:45 DEBUG] transformed U65Mb.SPC -> U65MB.SPC
[sigmove 03:29:45 DEBUG] transformed U65Mc.SPC -> U65MC.SPC
[sigmove 03:29:45 DEBUG] transformed U65Md.SPC -> U65MD.SPC
[sigmove 03:29:45 DEBUG] transformed U65Me.SPC -> U65ME.SPC
[sigmove 03:29:45 DEBUG] transformed U65Mf.SPC -> U65MF.SPC
[Status 03:29:45 INFO] data for U65 transferred to science data processing
[Tidy 03:29:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:29:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:29:45 INFO] resetting WatchDogTimer
[Status 03:29:45 INFO] Starting Set [AERI set: name V65, 6 scans, 0 angle, D16300 command]
[Ingest 03:29:45 INFO] Sending XML status message
[Status 03:29:45 INFO] Mirror angle: 0
[Mirror 03:29:45 INFO] rotating to position V
[Status 03:29:45 INFO] .SET file for ACQ96 ready
[Ingest 03:29:46 INFO] Starting acquisition
[Status 03:29:46 INFO] reading housekeeping
[Status 03:30:04 INFO] acquire complete
[Status 03:30:04 INFO] writing housekeeping
[Sequencer 03:30:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:30:04 INFO] incremented V scene to 65 completed views
[Sequencer 03:30:04 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:30:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:30:04 INFO] incremented to [AERI set: name W65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:30:04 INFO] V65.SIG(18)
[sigmove 03:30:04 DEBUG] transformed V65Ma.SPC -> V65MA.SPC
[sigmove 03:30:04 DEBUG] transformed V65Mb.SPC -> V65MB.SPC
[sigmove 03:30:04 DEBUG] transformed V65Mc.SPC -> V65MC.SPC
[sigmove 03:30:04 DEBUG] transformed V65Md.SPC -> V65MD.SPC
[sigmove 03:30:04 DEBUG] transformed V65Me.SPC -> V65ME.SPC
[sigmove 03:30:04 DEBUG] transformed V65Mf.SPC -> V65MF.SPC
[Status 03:30:04 INFO] data for V65 transferred to science data processing
[Tidy 03:30:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:30:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:30:04 INFO] resetting WatchDogTimer
[Status 03:30:04 INFO] Starting Set [AERI set: name W65, 6 scans, 0 angle, D16300 command]
[Ingest 03:30:04 INFO] Sending XML status message
[Status 03:30:04 INFO] Mirror angle: 0
[Mirror 03:30:04 INFO] rotating to position W
[Status 03:30:05 INFO] .SET file for ACQ96 ready
[Ingest 03:30:05 INFO] Starting acquisition
[Status 03:30:05 INFO] reading housekeeping
[Status 03:30:23 INFO] acquire complete
[Status 03:30:23 INFO] writing housekeeping
[Sequencer 03:30:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:30:23 INFO] incremented W scene to 65 completed views
[Sequencer 03:30:23 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:30:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:30:23 INFO] incremented to [AERI set: name X65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:30:23 INFO] W65.SIG(18)
[sigmove 03:30:23 DEBUG] transformed W65Ma.SPC -> W65MA.SPC
[sigmove 03:30:23 DEBUG] transformed W65Mb.SPC -> W65MB.SPC
[sigmove 03:30:23 DEBUG] transformed W65Mc.SPC -> W65MC.SPC
[sigmove 03:30:23 DEBUG] transformed W65Md.SPC -> W65MD.SPC
[sigmove 03:30:23 DEBUG] transformed W65Me.SPC -> W65ME.SPC
[sigmove 03:30:23 DEBUG] transformed W65Mf.SPC -> W65MF.SPC
[Status 03:30:23 INFO] data for W65 transferred to science data processing
[Tidy 03:30:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:30:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:30:23 INFO] resetting WatchDogTimer
[Status 03:30:23 INFO] Starting Set [AERI set: name X65, 6 scans, 0 angle, D16300 command]
[Ingest 03:30:23 INFO] Sending XML status message
[Status 03:30:23 INFO] Mirror angle: 0
[Mirror 03:30:23 INFO] rotating to position X
[Status 03:30:24 INFO] .SET file for ACQ96 ready
[Ingest 03:30:24 INFO] Starting acquisition
[Status 03:30:24 INFO] reading housekeeping
[Status 03:30:42 INFO] acquire complete
[Status 03:30:42 INFO] writing housekeeping
[Sequencer 03:30:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:30:42 INFO] incremented X scene to 65 completed views
[Sequencer 03:30:42 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:30:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:30:42 INFO] incremented to [AERI set: name Y65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:30:42 INFO] X65.SIG(18)
[sigmove 03:30:42 DEBUG] transformed X65Ma.SPC -> X65MA.SPC
[sigmove 03:30:42 DEBUG] transformed X65Mb.SPC -> X65MB.SPC
[sigmove 03:30:42 DEBUG] transformed X65Mc.SPC -> X65MC.SPC
[sigmove 03:30:42 DEBUG] transformed X65Md.SPC -> X65MD.SPC
[sigmove 03:30:42 DEBUG] transformed X65Me.SPC -> X65ME.SPC
[sigmove 03:30:42 DEBUG] transformed X65Mf.SPC -> X65MF.SPC
[Status 03:30:42 INFO] data for X65 transferred to science data processing
[Tidy 03:30:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:30:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:30:42 INFO] resetting WatchDogTimer
[Status 03:30:42 INFO] Starting Set [AERI set: name Y65, 6 scans, 0 angle, D16300 command]
[Ingest 03:30:42 INFO] Sending XML status message
[Status 03:30:42 INFO] Mirror angle: 0
[Mirror 03:30:43 INFO] rotating to position Y
[Status 03:30:43 INFO] .SET file for ACQ96 ready
[Ingest 03:30:43 INFO] Starting acquisition
[Status 03:30:43 INFO] reading housekeeping
[Status 03:31:01 INFO] acquire complete
[Status 03:31:01 INFO] writing housekeeping
[Sequencer 03:31:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:31:01 INFO] incremented Y scene to 65 completed views
[Sequencer 03:31:01 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:31:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:31:01 INFO] incremented to [AERI set: name Z65, 6 scans, 0 angle, D16300 command] set
[sigmove 03:31:01 INFO] Y65.SIG(18)
[sigmove 03:31:01 DEBUG] transformed Y65Ma.SPC -> Y65MA.SPC
[sigmove 03:31:01 DEBUG] transformed Y65Mb.SPC -> Y65MB.SPC
[sigmove 03:31:01 DEBUG] transformed Y65Mc.SPC -> Y65MC.SPC
[sigmove 03:31:01 DEBUG] transformed Y65Md.SPC -> Y65MD.SPC
[sigmove 03:31:01 DEBUG] transformed Y65Me.SPC -> Y65ME.SPC
[sigmove 03:31:01 DEBUG] transformed Y65Mf.SPC -> Y65MF.SPC
[Status 03:31:01 INFO] data for Y65 transferred to science data processing
[Tidy 03:31:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:31:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:31:01 INFO] resetting WatchDogTimer
[Status 03:31:01 INFO] Starting Set [AERI set: name Z65, 6 scans, 0 angle, D16300 command]
[Ingest 03:31:01 INFO] Sending XML status message
[Status 03:31:01 INFO] Mirror angle: 0
[Mirror 03:31:02 INFO] rotating to position Z
[Status 03:31:02 INFO] .SET file for ACQ96 ready
[Ingest 03:31:02 INFO] Starting acquisition
[Status 03:31:02 INFO] reading housekeeping
[Status 03:31:20 INFO] acquire complete
[Status 03:31:20 INFO] writing housekeeping
[Sequencer 03:31:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:31:20 INFO] incremented Z scene to 65 completed views
[Sequencer 03:31:20 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:31:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:31:20 INFO] incremented to [AERI set: name A66, 6 scans, 120 angle, D28300 command] set
[sigmove 03:31:20 INFO] Z65.SIG(18)
[sigmove 03:31:20 DEBUG] transformed Z65Ma.SPC -> Z65MA.SPC
[sigmove 03:31:20 DEBUG] transformed Z65Mb.SPC -> Z65MB.SPC
[sigmove 03:31:20 DEBUG] transformed Z65Mc.SPC -> Z65MC.SPC
[sigmove 03:31:20 DEBUG] transformed Z65Md.SPC -> Z65MD.SPC
[sigmove 03:31:20 DEBUG] transformed Z65Me.SPC -> Z65ME.SPC
[sigmove 03:31:20 DEBUG] transformed Z65Mf.SPC -> Z65MF.SPC
[Status 03:31:20 INFO] data for Z65 transferred to science data processing
[Tidy 03:31:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:31:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:31:20 INFO] resetting WatchDogTimer
[Status 03:31:21 INFO] Starting Set [AERI set: name A66, 6 scans, 120 angle, D28300 command]
[Ingest 03:31:21 INFO] Sending XML status message
[Status 03:31:21 INFO] Mirror angle: 120
[Mirror 03:31:21 INFO] rotating to position A
[Status 03:31:22 INFO] .SET file for ACQ96 ready
[Ingest 03:31:22 INFO] Starting acquisition
[Status 03:31:22 INFO] reading housekeeping
[Status 03:31:40 INFO] acquire complete
[Status 03:31:41 INFO] writing housekeeping
[Sequencer 03:31:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:31:41 INFO] incremented A scene to 66 completed views
[Sequencer 03:31:41 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:31:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:31:41 INFO] incremented to [AERI set: name H66, 6 scans, 60 angle, D22500 command] set
[sigmove 03:31:41 INFO] A66.SIG(18)
[sigmove 03:31:41 DEBUG] transformed A66Ma.SPC -> A66MA.SPC
[sigmove 03:31:41 DEBUG] transformed A66Mb.SPC -> A66MB.SPC
[sigmove 03:31:41 DEBUG] transformed A66Mc.SPC -> A66MC.SPC
[sigmove 03:31:41 DEBUG] transformed A66Md.SPC -> A66MD.SPC
[sigmove 03:31:41 DEBUG] transformed A66Me.SPC -> A66ME.SPC
[sigmove 03:31:41 DEBUG] transformed A66Mf.SPC -> A66MF.SPC
[Status 03:31:41 INFO] data for A66 transferred to science data processing
[Tidy 03:31:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:31:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:31:41 INFO] resetting WatchDogTimer
[Status 03:31:41 INFO] Starting Set [AERI set: name H66, 6 scans, 60 angle, D22500 command]
[Ingest 03:31:41 INFO] Sending XML status message
[Status 03:31:41 INFO] Mirror angle: 60
[Mirror 03:31:41 INFO] rotating to position H
[Status 03:31:42 INFO] .SET file for ACQ96 ready
[Ingest 03:31:42 INFO] Starting acquisition
[Status 03:31:42 INFO] reading housekeeping
[Status 03:31:59 INFO] acquire complete
[Status 03:32:00 INFO] writing housekeeping
[Sequencer 03:32:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:32:00 INFO] incremented H scene to 66 completed views
[Sequencer 03:32:00 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:32:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:32:00 INFO] incremented to [AERI set: name S66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:32:00 INFO] H66.SIG(18)
[sigmove 03:32:00 DEBUG] transformed H66Ma.SPC -> H66MA.SPC
[sigmove 03:32:00 DEBUG] transformed H66Mb.SPC -> H66MB.SPC
[sigmove 03:32:00 DEBUG] transformed H66Mc.SPC -> H66MC.SPC
[sigmove 03:32:00 DEBUG] transformed H66Md.SPC -> H66MD.SPC
[sigmove 03:32:00 DEBUG] transformed H66Me.SPC -> H66ME.SPC
[sigmove 03:32:00 DEBUG] transformed H66Mf.SPC -> H66MF.SPC
[Status 03:32:00 INFO] data for H66 transferred to science data processing
[Tidy 03:32:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:32:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:32:00 INFO] resetting WatchDogTimer
[Status 03:32:00 INFO] Starting Set [AERI set: name S66, 6 scans, 0 angle, D16300 command]
[Ingest 03:32:00 INFO] Sending XML status message
[Status 03:32:00 INFO] Mirror angle: 0
[Mirror 03:32:00 INFO] rotating to position S
[Status 03:32:01 INFO] .SET file for ACQ96 ready
[Ingest 03:32:01 INFO] Starting acquisition
[Status 03:32:01 INFO] reading housekeeping
[Status 03:32:18 INFO] acquire complete
[Status 03:32:19 INFO] writing housekeeping
[Sequencer 03:32:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:32:19 INFO] incremented S scene to 66 completed views
[Sequencer 03:32:19 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:32:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:32:19 INFO] incremented to [AERI set: name T66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:32:19 INFO] S66.SIG(18)
[sigmove 03:32:19 DEBUG] transformed S66Ma.SPC -> S66MA.SPC
[sigmove 03:32:19 DEBUG] transformed S66Mb.SPC -> S66MB.SPC
[sigmove 03:32:19 DEBUG] transformed S66Mc.SPC -> S66MC.SPC
[sigmove 03:32:19 DEBUG] transformed S66Md.SPC -> S66MD.SPC
[sigmove 03:32:19 DEBUG] transformed S66Me.SPC -> S66ME.SPC
[sigmove 03:32:19 DEBUG] transformed S66Mf.SPC -> S66MF.SPC
[Status 03:32:19 INFO] data for S66 transferred to science data processing
[Tidy 03:32:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:32:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:32:19 INFO] resetting WatchDogTimer
[Status 03:32:19 INFO] Starting Set [AERI set: name T66, 6 scans, 0 angle, D16300 command]
[Ingest 03:32:19 INFO] Sending XML status message
[Status 03:32:19 INFO] Mirror angle: 0
[Mirror 03:32:19 INFO] rotating to position T
[Status 03:32:19 INFO] .SET file for ACQ96 ready
[Ingest 03:32:19 INFO] Starting acquisition
[Status 03:32:20 INFO] reading housekeeping
[Status 03:32:37 INFO] acquire complete
[Status 03:32:38 INFO] writing housekeeping
[Sequencer 03:32:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:32:38 INFO] incremented T scene to 66 completed views
[Sequencer 03:32:38 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:32:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:32:38 INFO] incremented to [AERI set: name U66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:32:38 INFO] T66.SIG(18)
[sigmove 03:32:38 DEBUG] transformed T66Ma.SPC -> T66MA.SPC
[sigmove 03:32:38 DEBUG] transformed T66Mb.SPC -> T66MB.SPC
[sigmove 03:32:38 DEBUG] transformed T66Mc.SPC -> T66MC.SPC
[sigmove 03:32:38 DEBUG] transformed T66Md.SPC -> T66MD.SPC
[sigmove 03:32:38 DEBUG] transformed T66Me.SPC -> T66ME.SPC
[sigmove 03:32:38 DEBUG] transformed T66Mf.SPC -> T66MF.SPC
[Status 03:32:38 INFO] data for T66 transferred to science data processing
[Tidy 03:32:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:32:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:32:38 INFO] resetting WatchDogTimer
[Status 03:32:38 INFO] Starting Set [AERI set: name U66, 6 scans, 0 angle, D16300 command]
[Ingest 03:32:38 INFO] Sending XML status message
[Status 03:32:38 INFO] Mirror angle: 0
[Mirror 03:32:38 INFO] rotating to position U
[Status 03:32:38 INFO] .SET file for ACQ96 ready
[Ingest 03:32:38 INFO] Starting acquisition
[Status 03:32:39 INFO] reading housekeeping
[Status 03:32:57 INFO] acquire complete
[Status 03:32:57 INFO] writing housekeeping
[Sequencer 03:32:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:32:57 INFO] incremented U scene to 66 completed views
[Sequencer 03:32:57 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:32:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:32:57 INFO] incremented to [AERI set: name V66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:32:57 INFO] U66.SIG(18)
[sigmove 03:32:57 DEBUG] transformed U66Ma.SPC -> U66MA.SPC
[sigmove 03:32:57 DEBUG] transformed U66Mb.SPC -> U66MB.SPC
[sigmove 03:32:57 DEBUG] transformed U66Mc.SPC -> U66MC.SPC
[sigmove 03:32:57 DEBUG] transformed U66Md.SPC -> U66MD.SPC
[sigmove 03:32:57 DEBUG] transformed U66Me.SPC -> U66ME.SPC
[sigmove 03:32:57 DEBUG] transformed U66Mf.SPC -> U66MF.SPC
[Status 03:32:57 INFO] data for U66 transferred to science data processing
[Tidy 03:32:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:32:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:32:57 INFO] resetting WatchDogTimer
[Status 03:32:57 INFO] Starting Set [AERI set: name V66, 6 scans, 0 angle, D16300 command]
[Ingest 03:32:57 INFO] Sending XML status message
[Status 03:32:57 INFO] Mirror angle: 0
[Mirror 03:32:57 INFO] rotating to position V
[Status 03:32:57 INFO] .SET file for ACQ96 ready
[Ingest 03:32:58 INFO] Starting acquisition
[Status 03:32:58 INFO] reading housekeeping
[Status 03:33:16 INFO] acquire complete
[Status 03:33:17 INFO] writing housekeeping
[Sequencer 03:33:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:33:17 INFO] incremented V scene to 66 completed views
[Sequencer 03:33:17 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:33:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:33:17 INFO] incremented to [AERI set: name W66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:33:17 INFO] V66.SIG(18)
[sigmove 03:33:17 DEBUG] transformed V66Ma.SPC -> V66MA.SPC
[sigmove 03:33:17 DEBUG] transformed V66Mb.SPC -> V66MB.SPC
[sigmove 03:33:17 DEBUG] transformed V66Mc.SPC -> V66MC.SPC
[sigmove 03:33:17 DEBUG] transformed V66Md.SPC -> V66MD.SPC
[sigmove 03:33:17 DEBUG] transformed V66Me.SPC -> V66ME.SPC
[sigmove 03:33:17 DEBUG] transformed V66Mf.SPC -> V66MF.SPC
[Status 03:33:17 INFO] data for V66 transferred to science data processing
[Tidy 03:33:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:33:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:33:17 INFO] resetting WatchDogTimer
[Status 03:33:17 INFO] Starting Set [AERI set: name W66, 6 scans, 0 angle, D16300 command]
[Ingest 03:33:17 INFO] Sending XML status message
[Status 03:33:17 INFO] Mirror angle: 0
[Mirror 03:33:17 INFO] rotating to position W
[Status 03:33:17 INFO] .SET file for ACQ96 ready
[Ingest 03:33:17 INFO] Starting acquisition
[Status 03:33:17 INFO] reading housekeeping
[Status 03:33:35 INFO] acquire complete
[Status 03:33:35 INFO] writing housekeeping
[Sequencer 03:33:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:33:35 INFO] incremented W scene to 66 completed views
[Sequencer 03:33:35 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:33:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:33:35 INFO] incremented to [AERI set: name X66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:33:35 INFO] W66.SIG(18)
[sigmove 03:33:35 DEBUG] transformed W66Ma.SPC -> W66MA.SPC
[sigmove 03:33:35 DEBUG] transformed W66Mb.SPC -> W66MB.SPC
[sigmove 03:33:35 DEBUG] transformed W66Mc.SPC -> W66MC.SPC
[sigmove 03:33:35 DEBUG] transformed W66Md.SPC -> W66MD.SPC
[sigmove 03:33:35 DEBUG] transformed W66Me.SPC -> W66ME.SPC
[sigmove 03:33:35 DEBUG] transformed W66Mf.SPC -> W66MF.SPC
[Status 03:33:35 INFO] data for W66 transferred to science data processing
[Tidy 03:33:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:33:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:33:35 INFO] resetting WatchDogTimer
[Status 03:33:35 INFO] Starting Set [AERI set: name X66, 6 scans, 0 angle, D16300 command]
[Ingest 03:33:35 INFO] Sending XML status message
[Status 03:33:35 INFO] Mirror angle: 0
[Mirror 03:33:35 INFO] rotating to position X
[Status 03:33:36 INFO] .SET file for ACQ96 ready
[Ingest 03:33:36 INFO] Starting acquisition
[Status 03:33:36 INFO] reading housekeeping
[Status 03:33:54 INFO] acquire complete
[Status 03:33:54 INFO] writing housekeeping
[Sequencer 03:33:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:33:54 INFO] incremented X scene to 66 completed views
[Sequencer 03:33:54 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:33:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:33:54 INFO] incremented to [AERI set: name Y66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:33:54 INFO] X66.SIG(18)
[sigmove 03:33:54 DEBUG] transformed X66Ma.SPC -> X66MA.SPC
[sigmove 03:33:54 DEBUG] transformed X66Mb.SPC -> X66MB.SPC
[sigmove 03:33:54 DEBUG] transformed X66Mc.SPC -> X66MC.SPC
[sigmove 03:33:54 DEBUG] transformed X66Md.SPC -> X66MD.SPC
[sigmove 03:33:54 DEBUG] transformed X66Me.SPC -> X66ME.SPC
[sigmove 03:33:54 DEBUG] transformed X66Mf.SPC -> X66MF.SPC
[Status 03:33:54 INFO] data for X66 transferred to science data processing
[Tidy 03:33:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:33:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:33:54 INFO] resetting WatchDogTimer
[Status 03:33:54 INFO] Starting Set [AERI set: name Y66, 6 scans, 0 angle, D16300 command]
[Ingest 03:33:54 INFO] Sending XML status message
[Status 03:33:54 INFO] Mirror angle: 0
[Mirror 03:33:54 INFO] rotating to position Y
[Status 03:33:55 INFO] .SET file for ACQ96 ready
[Ingest 03:33:55 INFO] Starting acquisition
[Status 03:33:55 INFO] reading housekeeping
[Status 03:34:13 INFO] acquire complete
[Status 03:34:13 INFO] writing housekeeping
[Sequencer 03:34:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:34:13 INFO] incremented Y scene to 66 completed views
[Sequencer 03:34:13 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:34:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:34:13 INFO] incremented to [AERI set: name Z66, 6 scans, 0 angle, D16300 command] set
[sigmove 03:34:13 INFO] Y66.SIG(18)
[sigmove 03:34:13 DEBUG] transformed Y66Ma.SPC -> Y66MA.SPC
[sigmove 03:34:13 DEBUG] transformed Y66Mb.SPC -> Y66MB.SPC
[sigmove 03:34:13 DEBUG] transformed Y66Mc.SPC -> Y66MC.SPC
[sigmove 03:34:13 DEBUG] transformed Y66Md.SPC -> Y66MD.SPC
[sigmove 03:34:13 DEBUG] transformed Y66Me.SPC -> Y66ME.SPC
[sigmove 03:34:13 DEBUG] transformed Y66Mf.SPC -> Y66MF.SPC
[Status 03:34:13 INFO] data for Y66 transferred to science data processing
[Tidy 03:34:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:34:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:34:13 INFO] resetting WatchDogTimer
[Status 03:34:13 INFO] Starting Set [AERI set: name Z66, 6 scans, 0 angle, D16300 command]
[Ingest 03:34:13 INFO] Sending XML status message
[Status 03:34:13 INFO] Mirror angle: 0
[Mirror 03:34:14 INFO] rotating to position Z
[Status 03:34:14 INFO] .SET file for ACQ96 ready
[Ingest 03:34:14 INFO] Starting acquisition
[Status 03:34:14 INFO] reading housekeeping
[Status 03:34:32 INFO] acquire complete
[Status 03:34:32 INFO] writing housekeeping
[Sequencer 03:34:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:34:32 INFO] incremented Z scene to 66 completed views
[Sequencer 03:34:32 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:34:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:34:32 INFO] incremented to [AERI set: name H67, 6 scans, 60 angle, D22500 command] set
[sigmove 03:34:32 INFO] Z66.SIG(18)
[sigmove 03:34:32 DEBUG] transformed Z66Ma.SPC -> Z66MA.SPC
[sigmove 03:34:32 DEBUG] transformed Z66Mb.SPC -> Z66MB.SPC
[sigmove 03:34:32 DEBUG] transformed Z66Mc.SPC -> Z66MC.SPC
[sigmove 03:34:32 DEBUG] transformed Z66Md.SPC -> Z66MD.SPC
[sigmove 03:34:32 DEBUG] transformed Z66Me.SPC -> Z66ME.SPC
[sigmove 03:34:32 DEBUG] transformed Z66Mf.SPC -> Z66MF.SPC
[Status 03:34:32 INFO] data for Z66 transferred to science data processing
[Tidy 03:34:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:34:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:34:32 INFO] resetting WatchDogTimer
[Status 03:34:33 INFO] Starting Set [AERI set: name H67, 6 scans, 60 angle, D22500 command]
[Ingest 03:34:33 INFO] Sending XML status message
[Status 03:34:33 INFO] Mirror angle: 60
[Mirror 03:34:33 INFO] rotating to position H
[Status 03:34:33 INFO] .SET file for ACQ96 ready
[Ingest 03:34:34 INFO] Starting acquisition
[Status 03:34:34 INFO] reading housekeeping
[Status 03:34:51 INFO] acquire complete
[Status 03:34:52 INFO] writing housekeeping
[Sequencer 03:34:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:34:52 INFO] incremented H scene to 67 completed views
[Sequencer 03:34:52 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:34:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:34:52 INFO] incremented to [AERI set: name A67, 6 scans, 120 angle, D28300 command] set
[sigmove 03:34:52 INFO] H67.SIG(18)
[sigmove 03:34:52 DEBUG] transformed H67Ma.SPC -> H67MA.SPC
[sigmove 03:34:52 DEBUG] transformed H67Mb.SPC -> H67MB.SPC
[sigmove 03:34:52 DEBUG] transformed H67Mc.SPC -> H67MC.SPC
[sigmove 03:34:52 DEBUG] transformed H67Md.SPC -> H67MD.SPC
[sigmove 03:34:52 DEBUG] transformed H67Me.SPC -> H67ME.SPC
[sigmove 03:34:52 DEBUG] transformed H67Mf.SPC -> H67MF.SPC
[Status 03:34:52 INFO] data for H67 transferred to science data processing
[Tidy 03:34:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:34:52 INFO] A65.FIN(19),H65.FIN(19),S65.FIN(19),T65.FIN(19),U65.FIN(19),V65.FIN(19),W65.FIN(19),X65.FIN(19),Y65.FIN(19),Z65.FIN(19),A66.FIN(19),H66.FIN(19),S66.FIN(19),T66.FIN(19),U66.FIN(19),V66.FIN(19),W66.FIN(19),X66.FIN(19),Y66.FIN(19),Z66.FIN(19)
[sigmove 03:34:52 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:34:52 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:34:53 DEBUG] done zipping
[WatchDog 03:34:53 INFO] resetting WatchDogTimer
[Status 03:34:53 INFO] Starting Set [AERI set: name A67, 6 scans, 120 angle, D28300 command]
[Ingest 03:34:53 INFO] Sending XML status message
[Status 03:34:53 INFO] Mirror angle: 120
[Mirror 03:34:53 INFO] rotating to position A
[Status 03:34:54 INFO] .SET file for ACQ96 ready
[Ingest 03:34:54 INFO] Starting acquisition
[Status 03:34:54 INFO] reading housekeeping
[Status 03:35:12 INFO] acquire complete
[Status 03:35:13 INFO] writing housekeeping
[Sequencer 03:35:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:35:13 INFO] incremented A scene to 67 completed views
[Sequencer 03:35:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:35:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:35:13 INFO] incremented to [AERI set: name S67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:35:13 INFO] A67.SIG(18)
[sigmove 03:35:13 DEBUG] transformed A67Ma.SPC -> A67MA.SPC
[sigmove 03:35:13 DEBUG] transformed A67Mb.SPC -> A67MB.SPC
[sigmove 03:35:13 DEBUG] transformed A67Mc.SPC -> A67MC.SPC
[sigmove 03:35:13 DEBUG] transformed A67Md.SPC -> A67MD.SPC
[sigmove 03:35:13 DEBUG] transformed A67Me.SPC -> A67ME.SPC
[sigmove 03:35:13 DEBUG] transformed A67Mf.SPC -> A67MF.SPC
[Status 03:35:13 INFO] data for A67 transferred to science data processing
[Tidy 03:35:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:35:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:35:13 INFO] resetting WatchDogTimer
[Status 03:35:13 INFO] Starting Set [AERI set: name S67, 6 scans, 0 angle, D16300 command]
[Ingest 03:35:13 INFO] Sending XML status message
[Status 03:35:13 INFO] Mirror angle: 0
[Mirror 03:35:13 INFO] rotating to position S
[Status 03:35:14 INFO] .SET file for ACQ96 ready
[Ingest 03:35:14 INFO] Starting acquisition
[Status 03:35:15 INFO] reading housekeeping
[Status 03:35:33 INFO] acquire complete
[Status 03:35:33 INFO] writing housekeeping
[Sequencer 03:35:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:35:33 INFO] incremented S scene to 67 completed views
[Sequencer 03:35:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:35:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:35:33 INFO] incremented to [AERI set: name T67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:35:33 INFO] S67.SIG(18)
[sigmove 03:35:33 DEBUG] transformed S67Ma.SPC -> S67MA.SPC
[sigmove 03:35:33 DEBUG] transformed S67Mb.SPC -> S67MB.SPC
[sigmove 03:35:33 DEBUG] transformed S67Mc.SPC -> S67MC.SPC
[sigmove 03:35:33 DEBUG] transformed S67Md.SPC -> S67MD.SPC
[sigmove 03:35:33 DEBUG] transformed S67Me.SPC -> S67ME.SPC
[sigmove 03:35:33 DEBUG] transformed S67Mf.SPC -> S67MF.SPC
[Status 03:35:33 INFO] data for S67 transferred to science data processing
[Tidy 03:35:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:35:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:35:33 INFO] resetting WatchDogTimer
[Status 03:35:33 INFO] Starting Set [AERI set: name T67, 6 scans, 0 angle, D16300 command]
[Ingest 03:35:33 INFO] Sending XML status message
[Status 03:35:33 INFO] Mirror angle: 0
[Mirror 03:35:33 INFO] rotating to position T
[Status 03:35:34 INFO] .SET file for ACQ96 ready
[Ingest 03:35:34 INFO] Starting acquisition
[Status 03:35:34 INFO] reading housekeeping
[Status 03:35:52 INFO] acquire complete
[Status 03:35:52 INFO] writing housekeeping
[Sequencer 03:35:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:35:52 INFO] incremented T scene to 67 completed views
[Sequencer 03:35:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:35:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:35:52 INFO] incremented to [AERI set: name U67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:35:52 INFO] T67.SIG(18)
[sigmove 03:35:52 DEBUG] transformed T67Ma.SPC -> T67MA.SPC
[sigmove 03:35:52 DEBUG] transformed T67Mb.SPC -> T67MB.SPC
[sigmove 03:35:52 DEBUG] transformed T67Mc.SPC -> T67MC.SPC
[sigmove 03:35:52 DEBUG] transformed T67Md.SPC -> T67MD.SPC
[sigmove 03:35:52 DEBUG] transformed T67Me.SPC -> T67ME.SPC
[sigmove 03:35:52 DEBUG] transformed T67Mf.SPC -> T67MF.SPC
[Status 03:35:52 INFO] data for T67 transferred to science data processing
[Tidy 03:35:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:35:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:35:52 INFO] resetting WatchDogTimer
[Status 03:35:52 INFO] Starting Set [AERI set: name U67, 6 scans, 0 angle, D16300 command]
[Ingest 03:35:52 INFO] Sending XML status message
[Status 03:35:52 INFO] Mirror angle: 0
[Mirror 03:35:52 INFO] rotating to position U
[Status 03:35:53 INFO] .SET file for ACQ96 ready
[Ingest 03:35:53 INFO] Starting acquisition
[Status 03:35:53 INFO] reading housekeeping
[Status 03:36:11 INFO] acquire complete
[Status 03:36:11 INFO] writing housekeeping
[Sequencer 03:36:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:36:11 INFO] incremented U scene to 67 completed views
[Sequencer 03:36:11 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:36:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:36:11 INFO] incremented to [AERI set: name V67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:36:11 INFO] U67.SIG(18)
[sigmove 03:36:11 DEBUG] transformed U67Ma.SPC -> U67MA.SPC
[sigmove 03:36:11 DEBUG] transformed U67Mb.SPC -> U67MB.SPC
[sigmove 03:36:11 DEBUG] transformed U67Mc.SPC -> U67MC.SPC
[sigmove 03:36:11 DEBUG] transformed U67Md.SPC -> U67MD.SPC
[sigmove 03:36:11 DEBUG] transformed U67Me.SPC -> U67ME.SPC
[sigmove 03:36:11 DEBUG] transformed U67Mf.SPC -> U67MF.SPC
[Status 03:36:11 INFO] data for U67 transferred to science data processing
[Tidy 03:36:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:36:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:36:11 INFO] resetting WatchDogTimer
[Status 03:36:11 INFO] Starting Set [AERI set: name V67, 6 scans, 0 angle, D16300 command]
[Ingest 03:36:11 INFO] Sending XML status message
[Status 03:36:11 INFO] Mirror angle: 0
[Mirror 03:36:11 INFO] rotating to position V
[Status 03:36:12 INFO] .SET file for ACQ96 ready
[Ingest 03:36:12 INFO] Starting acquisition
[Status 03:36:12 INFO] reading housekeeping
[Status 03:36:30 INFO] acquire complete
[Status 03:36:30 INFO] writing housekeeping
[Sequencer 03:36:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:36:30 INFO] incremented V scene to 67 completed views
[Sequencer 03:36:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:36:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:36:30 INFO] incremented to [AERI set: name W67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:36:30 INFO] V67.SIG(18)
[sigmove 03:36:30 DEBUG] transformed V67Ma.SPC -> V67MA.SPC
[sigmove 03:36:30 DEBUG] transformed V67Mb.SPC -> V67MB.SPC
[sigmove 03:36:30 DEBUG] transformed V67Mc.SPC -> V67MC.SPC
[sigmove 03:36:30 DEBUG] transformed V67Md.SPC -> V67MD.SPC
[sigmove 03:36:30 DEBUG] transformed V67Me.SPC -> V67ME.SPC
[sigmove 03:36:30 DEBUG] transformed V67Mf.SPC -> V67MF.SPC
[Status 03:36:30 INFO] data for V67 transferred to science data processing
[Tidy 03:36:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:36:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:36:30 INFO] resetting WatchDogTimer
[Status 03:36:30 INFO] Starting Set [AERI set: name W67, 6 scans, 0 angle, D16300 command]
[Ingest 03:36:30 INFO] Sending XML status message
[Status 03:36:30 INFO] Mirror angle: 0
[Mirror 03:36:31 INFO] rotating to position W
[Status 03:36:31 INFO] .SET file for ACQ96 ready
[Ingest 03:36:31 INFO] Starting acquisition
[Status 03:36:31 INFO] reading housekeeping
[Status 03:36:49 INFO] acquire complete
[Status 03:36:49 INFO] writing housekeeping
[Sequencer 03:36:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:36:49 INFO] incremented W scene to 67 completed views
[Sequencer 03:36:49 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:36:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:36:49 INFO] incremented to [AERI set: name X67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:36:49 INFO] W67.SIG(18)
[sigmove 03:36:49 DEBUG] transformed W67Ma.SPC -> W67MA.SPC
[sigmove 03:36:49 DEBUG] transformed W67Mb.SPC -> W67MB.SPC
[sigmove 03:36:49 DEBUG] transformed W67Mc.SPC -> W67MC.SPC
[sigmove 03:36:49 DEBUG] transformed W67Md.SPC -> W67MD.SPC
[sigmove 03:36:49 DEBUG] transformed W67Me.SPC -> W67ME.SPC
[sigmove 03:36:49 DEBUG] transformed W67Mf.SPC -> W67MF.SPC
[Status 03:36:49 INFO] data for W67 transferred to science data processing
[Tidy 03:36:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:36:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:36:49 INFO] resetting WatchDogTimer
[Status 03:36:50 INFO] Starting Set [AERI set: name X67, 6 scans, 0 angle, D16300 command]
[Ingest 03:36:50 INFO] Sending XML status message
[Status 03:36:50 INFO] Mirror angle: 0
[Mirror 03:36:50 INFO] rotating to position X
[Status 03:36:50 INFO] .SET file for ACQ96 ready
[Ingest 03:36:50 INFO] Starting acquisition
[Status 03:36:50 INFO] reading housekeeping
[Status 03:37:08 INFO] acquire complete
[Status 03:37:08 INFO] writing housekeeping
[Sequencer 03:37:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:37:08 INFO] incremented X scene to 67 completed views
[Sequencer 03:37:08 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:37:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:37:08 INFO] incremented to [AERI set: name Y67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:37:08 INFO] X67.SIG(18)
[sigmove 03:37:08 DEBUG] transformed X67Ma.SPC -> X67MA.SPC
[sigmove 03:37:09 DEBUG] transformed X67Mb.SPC -> X67MB.SPC
[sigmove 03:37:09 DEBUG] transformed X67Mc.SPC -> X67MC.SPC
[sigmove 03:37:09 DEBUG] transformed X67Md.SPC -> X67MD.SPC
[sigmove 03:37:09 DEBUG] transformed X67Me.SPC -> X67ME.SPC
[sigmove 03:37:09 DEBUG] transformed X67Mf.SPC -> X67MF.SPC
[Status 03:37:09 INFO] data for X67 transferred to science data processing
[Tidy 03:37:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:37:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:37:09 INFO] resetting WatchDogTimer
[Status 03:37:09 INFO] Starting Set [AERI set: name Y67, 6 scans, 0 angle, D16300 command]
[Ingest 03:37:09 INFO] Sending XML status message
[Status 03:37:09 INFO] Mirror angle: 0
[Mirror 03:37:09 INFO] rotating to position Y
[Status 03:37:09 INFO] .SET file for ACQ96 ready
[Ingest 03:37:09 INFO] Starting acquisition
[Status 03:37:09 INFO] reading housekeeping
[Status 03:37:27 INFO] acquire complete
[Status 03:37:28 INFO] writing housekeeping
[Sequencer 03:37:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:37:28 INFO] incremented Y scene to 67 completed views
[Sequencer 03:37:28 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:37:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:37:28 INFO] incremented to [AERI set: name Z67, 6 scans, 0 angle, D16300 command] set
[sigmove 03:37:28 INFO] Y67.SIG(18)
[sigmove 03:37:28 DEBUG] transformed Y67Ma.SPC -> Y67MA.SPC
[sigmove 03:37:28 DEBUG] transformed Y67Mb.SPC -> Y67MB.SPC
[sigmove 03:37:28 DEBUG] transformed Y67Mc.SPC -> Y67MC.SPC
[sigmove 03:37:28 DEBUG] transformed Y67Md.SPC -> Y67MD.SPC
[sigmove 03:37:28 DEBUG] transformed Y67Me.SPC -> Y67ME.SPC
[sigmove 03:37:28 DEBUG] transformed Y67Mf.SPC -> Y67MF.SPC
[Status 03:37:28 INFO] data for Y67 transferred to science data processing
[Tidy 03:37:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:37:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:37:28 INFO] resetting WatchDogTimer
[Status 03:37:28 INFO] Starting Set [AERI set: name Z67, 6 scans, 0 angle, D16300 command]
[Ingest 03:37:28 INFO] Sending XML status message
[Status 03:37:28 INFO] Mirror angle: 0
[Mirror 03:37:28 INFO] rotating to position Z
[Status 03:37:28 INFO] .SET file for ACQ96 ready
[Ingest 03:37:28 INFO] Starting acquisition
[Status 03:37:28 INFO] reading housekeeping
[Status 03:37:46 INFO] acquire complete
[Status 03:37:47 INFO] writing housekeeping
[Sequencer 03:37:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:37:47 INFO] incremented Z scene to 67 completed views
[Sequencer 03:37:47 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:37:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:37:47 INFO] incremented to [AERI set: name A68, 6 scans, 120 angle, D28300 command] set
[sigmove 03:37:47 INFO] Z67.SIG(18)
[sigmove 03:37:47 DEBUG] transformed Z67Ma.SPC -> Z67MA.SPC
[sigmove 03:37:47 DEBUG] transformed Z67Mb.SPC -> Z67MB.SPC
[sigmove 03:37:47 DEBUG] transformed Z67Mc.SPC -> Z67MC.SPC
[sigmove 03:37:47 DEBUG] transformed Z67Md.SPC -> Z67MD.SPC
[sigmove 03:37:47 DEBUG] transformed Z67Me.SPC -> Z67ME.SPC
[sigmove 03:37:47 DEBUG] transformed Z67Mf.SPC -> Z67MF.SPC
[Status 03:37:47 INFO] data for Z67 transferred to science data processing
[Tidy 03:37:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:37:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:37:47 INFO] resetting WatchDogTimer
[Status 03:37:47 INFO] Starting Set [AERI set: name A68, 6 scans, 120 angle, D28300 command]
[Ingest 03:37:47 INFO] Sending XML status message
[Status 03:37:47 INFO] Mirror angle: 120
[Mirror 03:37:47 INFO] rotating to position A
[Status 03:37:48 INFO] .SET file for ACQ96 ready
[Ingest 03:37:48 INFO] Starting acquisition
[Status 03:37:48 INFO] reading housekeeping
[Status 03:38:06 INFO] acquire complete
[Status 03:38:07 INFO] writing housekeeping
[Sequencer 03:38:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:38:07 INFO] incremented A scene to 68 completed views
[Sequencer 03:38:07 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:38:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:38:07 INFO] incremented to [AERI set: name H68, 6 scans, 60 angle, D22500 command] set
[sigmove 03:38:07 INFO] A68.SIG(18)
[sigmove 03:38:07 DEBUG] transformed A68Ma.SPC -> A68MA.SPC
[sigmove 03:38:07 DEBUG] transformed A68Mb.SPC -> A68MB.SPC
[sigmove 03:38:07 DEBUG] transformed A68Mc.SPC -> A68MC.SPC
[sigmove 03:38:07 DEBUG] transformed A68Md.SPC -> A68MD.SPC
[sigmove 03:38:07 DEBUG] transformed A68Me.SPC -> A68ME.SPC
[sigmove 03:38:07 DEBUG] transformed A68Mf.SPC -> A68MF.SPC
[Status 03:38:07 INFO] data for A68 transferred to science data processing
[Tidy 03:38:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:38:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:38:07 INFO] resetting WatchDogTimer
[Status 03:38:07 INFO] Starting Set [AERI set: name H68, 6 scans, 60 angle, D22500 command]
[Ingest 03:38:07 INFO] Sending XML status message
[Status 03:38:07 INFO] Mirror angle: 60
[Mirror 03:38:07 INFO] rotating to position H
[Status 03:38:08 INFO] .SET file for ACQ96 ready
[Ingest 03:38:08 INFO] Starting acquisition
[Status 03:38:08 INFO] reading housekeeping
[Status 03:38:26 INFO] acquire complete
[Status 03:38:26 INFO] writing housekeeping
[Sequencer 03:38:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:38:26 INFO] incremented H scene to 68 completed views
[Sequencer 03:38:26 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:38:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:38:26 INFO] incremented to [AERI set: name S68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:38:26 INFO] H68.SIG(18)
[sigmove 03:38:26 DEBUG] transformed H68Ma.SPC -> H68MA.SPC
[sigmove 03:38:26 DEBUG] transformed H68Mb.SPC -> H68MB.SPC
[sigmove 03:38:26 DEBUG] transformed H68Mc.SPC -> H68MC.SPC
[sigmove 03:38:26 DEBUG] transformed H68Md.SPC -> H68MD.SPC
[sigmove 03:38:26 DEBUG] transformed H68Me.SPC -> H68ME.SPC
[sigmove 03:38:26 DEBUG] transformed H68Mf.SPC -> H68MF.SPC
[Status 03:38:26 INFO] data for H68 transferred to science data processing
[Tidy 03:38:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:38:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:38:26 INFO] resetting WatchDogTimer
[Status 03:38:26 INFO] Starting Set [AERI set: name S68, 6 scans, 0 angle, D16300 command]
[Ingest 03:38:26 INFO] Sending XML status message
[Status 03:38:26 INFO] Mirror angle: 0
[Mirror 03:38:26 INFO] rotating to position S
[Status 03:38:27 INFO] .SET file for ACQ96 ready
[Ingest 03:38:27 INFO] Starting acquisition
[Status 03:38:27 INFO] reading housekeeping
[Status 03:38:45 INFO] acquire complete
[Status 03:38:45 INFO] writing housekeeping
[Sequencer 03:38:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:38:45 INFO] incremented S scene to 68 completed views
[Sequencer 03:38:45 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:38:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:38:45 INFO] incremented to [AERI set: name T68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:38:45 INFO] S68.SIG(18)
[sigmove 03:38:45 DEBUG] transformed S68Ma.SPC -> S68MA.SPC
[sigmove 03:38:45 DEBUG] transformed S68Mb.SPC -> S68MB.SPC
[sigmove 03:38:45 DEBUG] transformed S68Mc.SPC -> S68MC.SPC
[sigmove 03:38:45 DEBUG] transformed S68Md.SPC -> S68MD.SPC
[sigmove 03:38:45 DEBUG] transformed S68Me.SPC -> S68ME.SPC
[sigmove 03:38:45 DEBUG] transformed S68Mf.SPC -> S68MF.SPC
[Status 03:38:45 INFO] data for S68 transferred to science data processing
[Tidy 03:38:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:38:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:38:45 INFO] resetting WatchDogTimer
[Status 03:38:45 INFO] Starting Set [AERI set: name T68, 6 scans, 0 angle, D16300 command]
[Ingest 03:38:45 INFO] Sending XML status message
[Status 03:38:45 INFO] Mirror angle: 0
[Mirror 03:38:45 INFO] rotating to position T
[Status 03:38:46 INFO] .SET file for ACQ96 ready
[Ingest 03:38:46 INFO] Starting acquisition
[Status 03:38:46 INFO] reading housekeeping
[Status 03:39:04 INFO] acquire complete
[Status 03:39:04 INFO] writing housekeeping
[Sequencer 03:39:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:39:04 INFO] incremented T scene to 68 completed views
[Sequencer 03:39:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:39:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:39:04 INFO] incremented to [AERI set: name U68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:39:04 INFO] T68.SIG(18)
[sigmove 03:39:04 DEBUG] transformed T68Ma.SPC -> T68MA.SPC
[sigmove 03:39:04 DEBUG] transformed T68Mb.SPC -> T68MB.SPC
[sigmove 03:39:04 DEBUG] transformed T68Mc.SPC -> T68MC.SPC
[sigmove 03:39:04 DEBUG] transformed T68Md.SPC -> T68MD.SPC
[sigmove 03:39:04 DEBUG] transformed T68Me.SPC -> T68ME.SPC
[sigmove 03:39:04 DEBUG] transformed T68Mf.SPC -> T68MF.SPC
[Status 03:39:04 INFO] data for T68 transferred to science data processing
[Tidy 03:39:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:39:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:39:04 INFO] resetting WatchDogTimer
[Status 03:39:04 INFO] Starting Set [AERI set: name U68, 6 scans, 0 angle, D16300 command]
[Ingest 03:39:04 INFO] Sending XML status message
[Status 03:39:04 INFO] Mirror angle: 0
[Mirror 03:39:04 INFO] rotating to position U
[Status 03:39:05 INFO] .SET file for ACQ96 ready
[Ingest 03:39:05 INFO] Starting acquisition
[Status 03:39:05 INFO] reading housekeeping
[Status 03:39:23 INFO] acquire complete
[Status 03:39:23 INFO] writing housekeeping
[Sequencer 03:39:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:39:23 INFO] incremented U scene to 68 completed views
[Sequencer 03:39:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:39:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:39:23 INFO] incremented to [AERI set: name V68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:39:23 INFO] U68.SIG(18)
[sigmove 03:39:23 DEBUG] transformed U68Ma.SPC -> U68MA.SPC
[sigmove 03:39:23 DEBUG] transformed U68Mb.SPC -> U68MB.SPC
[sigmove 03:39:23 DEBUG] transformed U68Mc.SPC -> U68MC.SPC
[sigmove 03:39:23 DEBUG] transformed U68Md.SPC -> U68MD.SPC
[sigmove 03:39:23 DEBUG] transformed U68Me.SPC -> U68ME.SPC
[sigmove 03:39:23 DEBUG] transformed U68Mf.SPC -> U68MF.SPC
[Status 03:39:23 INFO] data for U68 transferred to science data processing
[Tidy 03:39:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:39:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:39:23 INFO] resetting WatchDogTimer
[Status 03:39:23 INFO] Starting Set [AERI set: name V68, 6 scans, 0 angle, D16300 command]
[Ingest 03:39:23 INFO] Sending XML status message
[Status 03:39:23 INFO] Mirror angle: 0
[Mirror 03:39:23 INFO] rotating to position V
[Status 03:39:24 INFO] .SET file for ACQ96 ready
[Ingest 03:39:24 INFO] Starting acquisition
[Status 03:39:24 INFO] reading housekeeping
[Status 03:39:42 INFO] acquire complete
[Status 03:39:42 INFO] writing housekeeping
[Sequencer 03:39:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:39:42 INFO] incremented V scene to 68 completed views
[Sequencer 03:39:42 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:39:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:39:42 INFO] incremented to [AERI set: name W68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:39:42 INFO] V68.SIG(18)
[sigmove 03:39:42 DEBUG] transformed V68Ma.SPC -> V68MA.SPC
[sigmove 03:39:42 DEBUG] transformed V68Mb.SPC -> V68MB.SPC
[sigmove 03:39:42 DEBUG] transformed V68Mc.SPC -> V68MC.SPC
[sigmove 03:39:42 DEBUG] transformed V68Md.SPC -> V68MD.SPC
[sigmove 03:39:42 DEBUG] transformed V68Me.SPC -> V68ME.SPC
[sigmove 03:39:42 DEBUG] transformed V68Mf.SPC -> V68MF.SPC
[Status 03:39:42 INFO] data for V68 transferred to science data processing
[Tidy 03:39:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:39:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:39:42 INFO] resetting WatchDogTimer
[Status 03:39:42 INFO] Starting Set [AERI set: name W68, 6 scans, 0 angle, D16300 command]
[Ingest 03:39:42 INFO] Sending XML status message
[Status 03:39:42 INFO] Mirror angle: 0
[Mirror 03:39:43 INFO] rotating to position W
[Status 03:39:43 INFO] .SET file for ACQ96 ready
[Ingest 03:39:43 INFO] Starting acquisition
[Status 03:39:43 INFO] reading housekeeping
[Status 03:40:01 INFO] acquire complete
[Status 03:40:01 INFO] writing housekeeping
[Sequencer 03:40:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:40:01 INFO] incremented W scene to 68 completed views
[Sequencer 03:40:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:40:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:40:01 INFO] incremented to [AERI set: name X68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:40:01 INFO] W68.SIG(18)
[sigmove 03:40:01 DEBUG] transformed W68Ma.SPC -> W68MA.SPC
[sigmove 03:40:01 DEBUG] transformed W68Mb.SPC -> W68MB.SPC
[sigmove 03:40:01 DEBUG] transformed W68Mc.SPC -> W68MC.SPC
[sigmove 03:40:01 DEBUG] transformed W68Md.SPC -> W68MD.SPC
[sigmove 03:40:01 DEBUG] transformed W68Me.SPC -> W68ME.SPC
[sigmove 03:40:01 DEBUG] transformed W68Mf.SPC -> W68MF.SPC
[Status 03:40:01 INFO] data for W68 transferred to science data processing
[Tidy 03:40:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:40:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:40:01 INFO] resetting WatchDogTimer
[Status 03:40:02 INFO] Starting Set [AERI set: name X68, 6 scans, 0 angle, D16300 command]
[Ingest 03:40:02 INFO] Sending XML status message
[Status 03:40:02 INFO] Mirror angle: 0
[Mirror 03:40:02 INFO] rotating to position X
[Status 03:40:02 INFO] .SET file for ACQ96 ready
[Ingest 03:40:02 INFO] Starting acquisition
[Status 03:40:02 INFO] reading housekeeping
[Status 03:40:20 INFO] acquire complete
[Status 03:40:20 INFO] writing housekeeping
[Sequencer 03:40:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:40:20 INFO] incremented X scene to 68 completed views
[Sequencer 03:40:20 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:40:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:40:20 INFO] incremented to [AERI set: name Y68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:40:20 INFO] X68.SIG(18)
[sigmove 03:40:20 DEBUG] transformed X68Ma.SPC -> X68MA.SPC
[sigmove 03:40:20 DEBUG] transformed X68Mb.SPC -> X68MB.SPC
[sigmove 03:40:20 DEBUG] transformed X68Mc.SPC -> X68MC.SPC
[sigmove 03:40:20 DEBUG] transformed X68Md.SPC -> X68MD.SPC
[sigmove 03:40:20 DEBUG] transformed X68Me.SPC -> X68ME.SPC
[sigmove 03:40:20 DEBUG] transformed X68Mf.SPC -> X68MF.SPC
[Status 03:40:20 INFO] data for X68 transferred to science data processing
[Tidy 03:40:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:40:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:40:20 INFO] resetting WatchDogTimer
[Status 03:40:21 INFO] Starting Set [AERI set: name Y68, 6 scans, 0 angle, D16300 command]
[Ingest 03:40:21 INFO] Sending XML status message
[Status 03:40:21 INFO] Mirror angle: 0
[Mirror 03:40:21 INFO] rotating to position Y
[Status 03:40:21 INFO] .SET file for ACQ96 ready
[Ingest 03:40:21 INFO] Starting acquisition
[Status 03:40:21 INFO] reading housekeeping
[Status 03:40:39 INFO] acquire complete
[Status 03:40:40 INFO] writing housekeeping
[Sequencer 03:40:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:40:40 INFO] incremented Y scene to 68 completed views
[Sequencer 03:40:40 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:40:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:40:40 INFO] incremented to [AERI set: name Z68, 6 scans, 0 angle, D16300 command] set
[sigmove 03:40:40 INFO] Y68.SIG(18)
[sigmove 03:40:40 DEBUG] transformed Y68Ma.SPC -> Y68MA.SPC
[sigmove 03:40:40 DEBUG] transformed Y68Mb.SPC -> Y68MB.SPC
[sigmove 03:40:40 DEBUG] transformed Y68Mc.SPC -> Y68MC.SPC
[sigmove 03:40:40 DEBUG] transformed Y68Md.SPC -> Y68MD.SPC
[sigmove 03:40:40 DEBUG] transformed Y68Me.SPC -> Y68ME.SPC
[sigmove 03:40:40 DEBUG] transformed Y68Mf.SPC -> Y68MF.SPC
[Status 03:40:40 INFO] data for Y68 transferred to science data processing
[Tidy 03:40:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:40:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:40:40 INFO] resetting WatchDogTimer
[Status 03:40:40 INFO] Starting Set [AERI set: name Z68, 6 scans, 0 angle, D16300 command]
[Ingest 03:40:40 INFO] Sending XML status message
[Status 03:40:40 INFO] Mirror angle: 0
[Mirror 03:40:40 INFO] rotating to position Z
[Status 03:40:40 INFO] .SET file for ACQ96 ready
[Ingest 03:40:40 INFO] Starting acquisition
[Status 03:40:40 INFO] reading housekeeping
[Status 03:40:58 INFO] acquire complete
[Status 03:40:59 INFO] writing housekeeping
[Sequencer 03:40:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:40:59 INFO] incremented Z scene to 68 completed views
[Sequencer 03:40:59 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:40:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:40:59 INFO] incremented to [AERI set: name H69, 6 scans, 60 angle, D22500 command] set
[sigmove 03:40:59 INFO] Z68.SIG(18)
[sigmove 03:40:59 DEBUG] transformed Z68Ma.SPC -> Z68MA.SPC
[sigmove 03:40:59 DEBUG] transformed Z68Mb.SPC -> Z68MB.SPC
[sigmove 03:40:59 DEBUG] transformed Z68Mc.SPC -> Z68MC.SPC
[sigmove 03:40:59 DEBUG] transformed Z68Md.SPC -> Z68MD.SPC
[sigmove 03:40:59 DEBUG] transformed Z68Me.SPC -> Z68ME.SPC
[sigmove 03:40:59 DEBUG] transformed Z68Mf.SPC -> Z68MF.SPC
[Status 03:40:59 INFO] data for Z68 transferred to science data processing
[Tidy 03:40:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:40:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:40:59 INFO] resetting WatchDogTimer
[Status 03:40:59 INFO] Starting Set [AERI set: name H69, 6 scans, 60 angle, D22500 command]
[Ingest 03:40:59 INFO] Sending XML status message
[Status 03:40:59 INFO] Mirror angle: 60
[Mirror 03:40:59 INFO] rotating to position H
[Status 03:41:00 INFO] .SET file for ACQ96 ready
[Ingest 03:41:00 INFO] Starting acquisition
[Status 03:41:00 INFO] reading housekeeping
[Status 03:41:17 INFO] acquire complete
[Status 03:41:18 INFO] writing housekeeping
[Sequencer 03:41:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:41:18 INFO] incremented H scene to 69 completed views
[Sequencer 03:41:18 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:41:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:41:18 INFO] incremented to [AERI set: name A69, 6 scans, 120 angle, D28300 command] set
[sigmove 03:41:18 INFO] H69.SIG(18)
[sigmove 03:41:18 DEBUG] transformed H69Ma.SPC -> H69MA.SPC
[sigmove 03:41:18 DEBUG] transformed H69Mb.SPC -> H69MB.SPC
[sigmove 03:41:18 DEBUG] transformed H69Mc.SPC -> H69MC.SPC
[sigmove 03:41:18 DEBUG] transformed H69Md.SPC -> H69MD.SPC
[sigmove 03:41:18 DEBUG] transformed H69Me.SPC -> H69ME.SPC
[sigmove 03:41:18 DEBUG] transformed H69Mf.SPC -> H69MF.SPC
[Status 03:41:18 INFO] data for H69 transferred to science data processing
[Tidy 03:41:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:41:18 INFO] A67.FIN(19),H67.FIN(19),S67.FIN(19),T67.FIN(19),U67.FIN(19),V67.FIN(19),W67.FIN(19),X67.FIN(19),Y67.FIN(19),Z67.FIN(19),A68.FIN(19),H68.FIN(19),S68.FIN(19),T68.FIN(19),U68.FIN(19),V68.FIN(19),W68.FIN(19),X68.FIN(19),Y68.FIN(19),Z68.FIN(19)
[sigmove 03:41:18 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:41:18 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:41:19 DEBUG] done zipping
[WatchDog 03:41:19 INFO] resetting WatchDogTimer
[Status 03:41:19 INFO] Starting Set [AERI set: name A69, 6 scans, 120 angle, D28300 command]
[Ingest 03:41:19 INFO] Sending XML status message
[Status 03:41:19 INFO] Mirror angle: 120
[Mirror 03:41:20 INFO] rotating to position A
[Status 03:41:20 INFO] .SET file for ACQ96 ready
[Ingest 03:41:20 INFO] Starting acquisition
[Status 03:41:21 INFO] reading housekeeping
[Status 03:41:39 INFO] acquire complete
[Status 03:41:39 INFO] writing housekeeping
[Sequencer 03:41:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:41:39 INFO] incremented A scene to 69 completed views
[Sequencer 03:41:39 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:41:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:41:39 INFO] incremented to [AERI set: name S69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:41:39 INFO] A69.SIG(18)
[sigmove 03:41:39 DEBUG] transformed A69Ma.SPC -> A69MA.SPC
[sigmove 03:41:39 DEBUG] transformed A69Mb.SPC -> A69MB.SPC
[sigmove 03:41:39 DEBUG] transformed A69Mc.SPC -> A69MC.SPC
[sigmove 03:41:39 DEBUG] transformed A69Md.SPC -> A69MD.SPC
[sigmove 03:41:39 DEBUG] transformed A69Me.SPC -> A69ME.SPC
[sigmove 03:41:39 DEBUG] transformed A69Mf.SPC -> A69MF.SPC
[Status 03:41:39 INFO] data for A69 transferred to science data processing
[Tidy 03:41:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:41:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:41:39 INFO] resetting WatchDogTimer
[Status 03:41:39 INFO] Starting Set [AERI set: name S69, 6 scans, 0 angle, D16300 command]
[Ingest 03:41:39 INFO] Sending XML status message
[Status 03:41:39 INFO] Mirror angle: 0
[Mirror 03:41:39 INFO] rotating to position S
[Status 03:41:41 INFO] .SET file for ACQ96 ready
[Ingest 03:41:41 INFO] Starting acquisition
[Status 03:41:41 INFO] reading housekeeping
[Status 03:41:59 INFO] acquire complete
[Status 03:41:59 INFO] writing housekeeping
[Sequencer 03:41:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:41:59 INFO] incremented S scene to 69 completed views
[Sequencer 03:41:59 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:41:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:41:59 INFO] incremented to [AERI set: name T69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:41:59 INFO] S69.SIG(18)
[sigmove 03:41:59 DEBUG] transformed S69Ma.SPC -> S69MA.SPC
[sigmove 03:41:59 DEBUG] transformed S69Mb.SPC -> S69MB.SPC
[sigmove 03:41:59 DEBUG] transformed S69Mc.SPC -> S69MC.SPC
[sigmove 03:41:59 DEBUG] transformed S69Md.SPC -> S69MD.SPC
[sigmove 03:41:59 DEBUG] transformed S69Me.SPC -> S69ME.SPC
[sigmove 03:41:59 DEBUG] transformed S69Mf.SPC -> S69MF.SPC
[Status 03:41:59 INFO] data for S69 transferred to science data processing
[Tidy 03:41:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:41:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:41:59 INFO] resetting WatchDogTimer
[Status 03:41:59 INFO] Starting Set [AERI set: name T69, 6 scans, 0 angle, D16300 command]
[Ingest 03:41:59 INFO] Sending XML status message
[Status 03:41:59 INFO] Mirror angle: 0
[Mirror 03:42:00 INFO] rotating to position T
[Status 03:42:00 INFO] .SET file for ACQ96 ready
[Ingest 03:42:00 INFO] Starting acquisition
[Status 03:42:00 INFO] reading housekeeping
[Status 03:42:18 INFO] acquire complete
[Status 03:42:18 INFO] writing housekeeping
[Sequencer 03:42:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:42:18 INFO] incremented T scene to 69 completed views
[Sequencer 03:42:18 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:42:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:42:18 INFO] incremented to [AERI set: name U69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:42:18 INFO] T69.SIG(18)
[sigmove 03:42:18 DEBUG] transformed T69Ma.SPC -> T69MA.SPC
[sigmove 03:42:18 DEBUG] transformed T69Mb.SPC -> T69MB.SPC
[sigmove 03:42:18 DEBUG] transformed T69Mc.SPC -> T69MC.SPC
[sigmove 03:42:18 DEBUG] transformed T69Md.SPC -> T69MD.SPC
[sigmove 03:42:18 DEBUG] transformed T69Me.SPC -> T69ME.SPC
[sigmove 03:42:18 DEBUG] transformed T69Mf.SPC -> T69MF.SPC
[Status 03:42:18 INFO] data for T69 transferred to science data processing
[Tidy 03:42:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:42:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:42:18 INFO] resetting WatchDogTimer
[Status 03:42:19 INFO] Starting Set [AERI set: name U69, 6 scans, 0 angle, D16300 command]
[Ingest 03:42:19 INFO] Sending XML status message
[Status 03:42:19 INFO] Mirror angle: 0
[Mirror 03:42:19 INFO] rotating to position U
[Status 03:42:19 INFO] .SET file for ACQ96 ready
[Ingest 03:42:19 INFO] Starting acquisition
[Status 03:42:19 INFO] reading housekeeping
[Status 03:42:37 INFO] acquire complete
[Status 03:42:37 INFO] writing housekeeping
[Sequencer 03:42:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:42:37 INFO] incremented U scene to 69 completed views
[Sequencer 03:42:37 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:42:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:42:37 INFO] incremented to [AERI set: name V69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:42:37 INFO] U69.SIG(18)
[sigmove 03:42:37 DEBUG] transformed U69Ma.SPC -> U69MA.SPC
[sigmove 03:42:37 DEBUG] transformed U69Mb.SPC -> U69MB.SPC
[sigmove 03:42:37 DEBUG] transformed U69Mc.SPC -> U69MC.SPC
[sigmove 03:42:37 DEBUG] transformed U69Md.SPC -> U69MD.SPC
[sigmove 03:42:37 DEBUG] transformed U69Me.SPC -> U69ME.SPC
[sigmove 03:42:37 DEBUG] transformed U69Mf.SPC -> U69MF.SPC
[Status 03:42:37 INFO] data for U69 transferred to science data processing
[Tidy 03:42:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:42:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:42:37 INFO] resetting WatchDogTimer
[Status 03:42:38 INFO] Starting Set [AERI set: name V69, 6 scans, 0 angle, D16300 command]
[Ingest 03:42:38 INFO] Sending XML status message
[Status 03:42:38 INFO] Mirror angle: 0
[Mirror 03:42:38 INFO] rotating to position V
[Status 03:42:38 INFO] .SET file for ACQ96 ready
[Ingest 03:42:38 INFO] Starting acquisition
[Status 03:42:38 INFO] reading housekeeping
[Status 03:42:56 INFO] acquire complete
[Status 03:42:57 INFO] writing housekeeping
[Sequencer 03:42:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:42:57 INFO] incremented V scene to 69 completed views
[Sequencer 03:42:57 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:42:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:42:57 INFO] incremented to [AERI set: name W69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:42:57 INFO] V69.SIG(18)
[sigmove 03:42:57 DEBUG] transformed V69Ma.SPC -> V69MA.SPC
[sigmove 03:42:57 DEBUG] transformed V69Mb.SPC -> V69MB.SPC
[sigmove 03:42:57 DEBUG] transformed V69Mc.SPC -> V69MC.SPC
[sigmove 03:42:57 DEBUG] transformed V69Md.SPC -> V69MD.SPC
[sigmove 03:42:57 DEBUG] transformed V69Me.SPC -> V69ME.SPC
[sigmove 03:42:57 DEBUG] transformed V69Mf.SPC -> V69MF.SPC
[Status 03:42:57 INFO] data for V69 transferred to science data processing
[Tidy 03:42:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:42:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:42:57 INFO] resetting WatchDogTimer
[Status 03:42:57 INFO] Starting Set [AERI set: name W69, 6 scans, 0 angle, D16300 command]
[Ingest 03:42:57 INFO] Sending XML status message
[Status 03:42:57 INFO] Mirror angle: 0
[Mirror 03:42:57 INFO] rotating to position W
[Status 03:42:57 INFO] .SET file for ACQ96 ready
[Ingest 03:42:57 INFO] Starting acquisition
[Status 03:42:57 INFO] reading housekeeping
[Status 03:43:15 INFO] acquire complete
[Status 03:43:16 INFO] writing housekeeping
[Sequencer 03:43:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:43:16 INFO] incremented W scene to 69 completed views
[Sequencer 03:43:16 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:43:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:43:16 INFO] incremented to [AERI set: name X69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:43:16 INFO] W69.SIG(18)
[sigmove 03:43:16 DEBUG] transformed W69Ma.SPC -> W69MA.SPC
[sigmove 03:43:16 DEBUG] transformed W69Mb.SPC -> W69MB.SPC
[sigmove 03:43:16 DEBUG] transformed W69Mc.SPC -> W69MC.SPC
[sigmove 03:43:16 DEBUG] transformed W69Md.SPC -> W69MD.SPC
[sigmove 03:43:16 DEBUG] transformed W69Me.SPC -> W69ME.SPC
[sigmove 03:43:16 DEBUG] transformed W69Mf.SPC -> W69MF.SPC
[Status 03:43:16 INFO] data for W69 transferred to science data processing
[Tidy 03:43:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:43:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:43:16 INFO] resetting WatchDogTimer
[Status 03:43:16 INFO] Starting Set [AERI set: name X69, 6 scans, 0 angle, D16300 command]
[Ingest 03:43:16 INFO] Sending XML status message
[Status 03:43:16 INFO] Mirror angle: 0
[Mirror 03:43:16 INFO] rotating to position X
[Status 03:43:16 INFO] .SET file for ACQ96 ready
[Ingest 03:43:16 INFO] Starting acquisition
[Status 03:43:16 INFO] reading housekeeping
[Status 03:43:34 INFO] acquire complete
[Status 03:43:35 INFO] writing housekeeping
[Sequencer 03:43:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:43:35 INFO] incremented X scene to 69 completed views
[Sequencer 03:43:35 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:43:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:43:35 INFO] incremented to [AERI set: name Y69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:43:35 INFO] X69.SIG(18)
[sigmove 03:43:35 DEBUG] transformed X69Ma.SPC -> X69MA.SPC
[sigmove 03:43:35 DEBUG] transformed X69Mb.SPC -> X69MB.SPC
[sigmove 03:43:35 DEBUG] transformed X69Mc.SPC -> X69MC.SPC
[sigmove 03:43:35 DEBUG] transformed X69Md.SPC -> X69MD.SPC
[sigmove 03:43:35 DEBUG] transformed X69Me.SPC -> X69ME.SPC
[sigmove 03:43:35 DEBUG] transformed X69Mf.SPC -> X69MF.SPC
[Status 03:43:35 INFO] data for X69 transferred to science data processing
[Tidy 03:43:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:43:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:43:35 INFO] resetting WatchDogTimer
[Status 03:43:35 INFO] Starting Set [AERI set: name Y69, 6 scans, 0 angle, D16300 command]
[Ingest 03:43:35 INFO] Sending XML status message
[Status 03:43:35 INFO] Mirror angle: 0
[Mirror 03:43:35 INFO] rotating to position Y
[Status 03:43:35 INFO] .SET file for ACQ96 ready
[Ingest 03:43:35 INFO] Starting acquisition
[Status 03:43:35 INFO] reading housekeeping
[Status 03:43:53 INFO] acquire complete
[Status 03:43:54 INFO] writing housekeeping
[Sequencer 03:43:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:43:54 INFO] incremented Y scene to 69 completed views
[Sequencer 03:43:54 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:43:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:43:54 INFO] incremented to [AERI set: name Z69, 6 scans, 0 angle, D16300 command] set
[sigmove 03:43:54 INFO] Y69.SIG(18)
[sigmove 03:43:54 DEBUG] transformed Y69Ma.SPC -> Y69MA.SPC
[sigmove 03:43:54 DEBUG] transformed Y69Mb.SPC -> Y69MB.SPC
[sigmove 03:43:54 DEBUG] transformed Y69Mc.SPC -> Y69MC.SPC
[sigmove 03:43:54 DEBUG] transformed Y69Md.SPC -> Y69MD.SPC
[sigmove 03:43:54 DEBUG] transformed Y69Me.SPC -> Y69ME.SPC
[sigmove 03:43:54 DEBUG] transformed Y69Mf.SPC -> Y69MF.SPC
[Status 03:43:54 INFO] data for Y69 transferred to science data processing
[Tidy 03:43:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:43:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:43:54 INFO] resetting WatchDogTimer
[Status 03:43:54 INFO] Starting Set [AERI set: name Z69, 6 scans, 0 angle, D16300 command]
[Ingest 03:43:54 INFO] Sending XML status message
[Status 03:43:54 INFO] Mirror angle: 0
[Mirror 03:43:54 INFO] rotating to position Z
[Status 03:43:54 INFO] .SET file for ACQ96 ready
[Ingest 03:43:54 INFO] Starting acquisition
[Status 03:43:55 INFO] reading housekeeping
[Status 03:44:12 INFO] acquire complete
[Status 03:44:13 INFO] writing housekeeping
[Sequencer 03:44:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:44:13 INFO] incremented Z scene to 69 completed views
[Sequencer 03:44:13 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:44:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:44:13 INFO] incremented to [AERI set: name A70, 6 scans, 120 angle, D28300 command] set
[sigmove 03:44:13 INFO] Z69.SIG(18)
[sigmove 03:44:13 DEBUG] transformed Z69Ma.SPC -> Z69MA.SPC
[sigmove 03:44:13 DEBUG] transformed Z69Mb.SPC -> Z69MB.SPC
[sigmove 03:44:13 DEBUG] transformed Z69Mc.SPC -> Z69MC.SPC
[sigmove 03:44:13 DEBUG] transformed Z69Md.SPC -> Z69MD.SPC
[sigmove 03:44:13 DEBUG] transformed Z69Me.SPC -> Z69ME.SPC
[sigmove 03:44:13 DEBUG] transformed Z69Mf.SPC -> Z69MF.SPC
[Status 03:44:13 INFO] data for Z69 transferred to science data processing
[Tidy 03:44:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:44:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:44:13 INFO] resetting WatchDogTimer
[Status 03:44:13 INFO] Starting Set [AERI set: name A70, 6 scans, 120 angle, D28300 command]
[Ingest 03:44:13 INFO] Sending XML status message
[Status 03:44:13 INFO] Mirror angle: 120
[Mirror 03:44:13 INFO] rotating to position A
[Status 03:44:14 INFO] .SET file for ACQ96 ready
[Ingest 03:44:15 INFO] Starting acquisition
[Status 03:44:15 INFO] reading housekeeping
[Status 03:44:33 INFO] acquire complete
[Status 03:44:33 INFO] writing housekeeping
[Sequencer 03:44:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:44:33 INFO] incremented A scene to 70 completed views
[Sequencer 03:44:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:44:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:44:33 INFO] incremented to [AERI set: name H70, 6 scans, 60 angle, D22500 command] set
[sigmove 03:44:33 INFO] A70.SIG(18)
[sigmove 03:44:33 DEBUG] transformed A70Ma.SPC -> A70MA.SPC
[sigmove 03:44:33 DEBUG] transformed A70Mb.SPC -> A70MB.SPC
[sigmove 03:44:33 DEBUG] transformed A70Mc.SPC -> A70MC.SPC
[sigmove 03:44:33 DEBUG] transformed A70Md.SPC -> A70MD.SPC
[sigmove 03:44:33 DEBUG] transformed A70Me.SPC -> A70ME.SPC
[sigmove 03:44:33 DEBUG] transformed A70Mf.SPC -> A70MF.SPC
[Status 03:44:33 INFO] data for A70 transferred to science data processing
[Tidy 03:44:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:44:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:44:33 INFO] resetting WatchDogTimer
[Status 03:44:33 INFO] Starting Set [AERI set: name H70, 6 scans, 60 angle, D22500 command]
[Ingest 03:44:33 INFO] Sending XML status message
[Status 03:44:33 INFO] Mirror angle: 60
[Mirror 03:44:33 INFO] rotating to position H
[Status 03:44:34 INFO] .SET file for ACQ96 ready
[Ingest 03:44:34 INFO] Starting acquisition
[Status 03:44:34 INFO] reading housekeeping
[Status 03:44:52 INFO] acquire complete
[Status 03:44:52 INFO] writing housekeeping
[Sequencer 03:44:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:44:52 INFO] incremented H scene to 70 completed views
[Sequencer 03:44:52 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:44:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:44:52 INFO] incremented to [AERI set: name S70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:44:52 INFO] H70.SIG(18)
[sigmove 03:44:52 DEBUG] transformed H70Ma.SPC -> H70MA.SPC
[sigmove 03:44:52 DEBUG] transformed H70Mb.SPC -> H70MB.SPC
[sigmove 03:44:52 DEBUG] transformed H70Mc.SPC -> H70MC.SPC
[sigmove 03:44:52 DEBUG] transformed H70Md.SPC -> H70MD.SPC
[sigmove 03:44:52 DEBUG] transformed H70Me.SPC -> H70ME.SPC
[sigmove 03:44:52 DEBUG] transformed H70Mf.SPC -> H70MF.SPC
[Status 03:44:52 INFO] data for H70 transferred to science data processing
[Tidy 03:44:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:44:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:44:52 INFO] resetting WatchDogTimer
[Status 03:44:52 INFO] Starting Set [AERI set: name S70, 6 scans, 0 angle, D16300 command]
[Ingest 03:44:52 INFO] Sending XML status message
[Status 03:44:52 INFO] Mirror angle: 0
[Mirror 03:44:52 INFO] rotating to position S
[Status 03:44:53 INFO] .SET file for ACQ96 ready
[Ingest 03:44:53 INFO] Starting acquisition
[Status 03:44:53 INFO] reading housekeeping
[Status 03:45:11 INFO] acquire complete
[Status 03:45:11 INFO] writing housekeeping
[Sequencer 03:45:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:45:11 INFO] incremented S scene to 70 completed views
[Sequencer 03:45:11 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:45:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:45:11 INFO] incremented to [AERI set: name T70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:45:11 INFO] S70.SIG(18)
[sigmove 03:45:11 DEBUG] transformed S70Ma.SPC -> S70MA.SPC
[sigmove 03:45:11 DEBUG] transformed S70Mb.SPC -> S70MB.SPC
[sigmove 03:45:11 DEBUG] transformed S70Mc.SPC -> S70MC.SPC
[sigmove 03:45:11 DEBUG] transformed S70Md.SPC -> S70MD.SPC
[sigmove 03:45:11 DEBUG] transformed S70Me.SPC -> S70ME.SPC
[sigmove 03:45:11 DEBUG] transformed S70Mf.SPC -> S70MF.SPC
[Status 03:45:11 INFO] data for S70 transferred to science data processing
[Tidy 03:45:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:45:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:45:11 INFO] resetting WatchDogTimer
[Status 03:45:11 INFO] Starting Set [AERI set: name T70, 6 scans, 0 angle, D16300 command]
[Ingest 03:45:11 INFO] Sending XML status message
[Status 03:45:11 INFO] Mirror angle: 0
[Mirror 03:45:12 INFO] rotating to position T
[Status 03:45:12 INFO] .SET file for ACQ96 ready
[Ingest 03:45:12 INFO] Starting acquisition
[Status 03:45:12 INFO] reading housekeeping
[Status 03:45:30 INFO] acquire complete
[Status 03:45:30 INFO] writing housekeeping
[Sequencer 03:45:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:45:30 INFO] incremented T scene to 70 completed views
[Sequencer 03:45:30 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:45:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:45:30 INFO] incremented to [AERI set: name U70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:45:30 INFO] T70.SIG(18)
[sigmove 03:45:30 DEBUG] transformed T70Ma.SPC -> T70MA.SPC
[sigmove 03:45:30 DEBUG] transformed T70Mb.SPC -> T70MB.SPC
[sigmove 03:45:30 DEBUG] transformed T70Mc.SPC -> T70MC.SPC
[sigmove 03:45:30 DEBUG] transformed T70Md.SPC -> T70MD.SPC
[sigmove 03:45:30 DEBUG] transformed T70Me.SPC -> T70ME.SPC
[sigmove 03:45:30 DEBUG] transformed T70Mf.SPC -> T70MF.SPC
[Status 03:45:30 INFO] data for T70 transferred to science data processing
[Tidy 03:45:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:45:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:45:30 INFO] resetting WatchDogTimer
[Status 03:45:30 INFO] Starting Set [AERI set: name U70, 6 scans, 0 angle, D16300 command]
[Ingest 03:45:30 INFO] Sending XML status message
[Status 03:45:31 INFO] Mirror angle: 0
[Mirror 03:45:31 INFO] rotating to position U
[Status 03:45:31 INFO] .SET file for ACQ96 ready
[Ingest 03:45:31 INFO] Starting acquisition
[Status 03:45:32 INFO] reading housekeeping
[Status 03:45:49 INFO] acquire complete
[Status 03:45:49 INFO] writing housekeeping
[Sequencer 03:45:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:45:49 INFO] incremented U scene to 70 completed views
[Sequencer 03:45:49 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:45:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:45:49 INFO] incremented to [AERI set: name V70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:45:49 INFO] U70.SIG(18)
[sigmove 03:45:49 DEBUG] transformed U70Ma.SPC -> U70MA.SPC
[sigmove 03:45:49 DEBUG] transformed U70Mb.SPC -> U70MB.SPC
[sigmove 03:45:49 DEBUG] transformed U70Mc.SPC -> U70MC.SPC
[sigmove 03:45:49 DEBUG] transformed U70Md.SPC -> U70MD.SPC
[sigmove 03:45:49 DEBUG] transformed U70Me.SPC -> U70ME.SPC
[sigmove 03:45:49 DEBUG] transformed U70Mf.SPC -> U70MF.SPC
[Status 03:45:49 INFO] data for U70 transferred to science data processing
[Tidy 03:45:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:45:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:45:49 INFO] resetting WatchDogTimer
[Status 03:45:50 INFO] Starting Set [AERI set: name V70, 6 scans, 0 angle, D16300 command]
[Ingest 03:45:50 INFO] Sending XML status message
[Status 03:45:50 INFO] Mirror angle: 0
[Mirror 03:45:50 INFO] rotating to position V
[Status 03:45:50 INFO] .SET file for ACQ96 ready
[Ingest 03:45:50 INFO] Starting acquisition
[Status 03:45:50 INFO] reading housekeeping
[Status 03:46:08 INFO] acquire complete
[Status 03:46:09 INFO] writing housekeeping
[Sequencer 03:46:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:46:09 INFO] incremented V scene to 70 completed views
[Sequencer 03:46:09 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:46:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:46:09 INFO] incremented to [AERI set: name W70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:46:09 INFO] V70.SIG(18)
[sigmove 03:46:09 DEBUG] transformed V70Ma.SPC -> V70MA.SPC
[sigmove 03:46:09 DEBUG] transformed V70Mb.SPC -> V70MB.SPC
[sigmove 03:46:09 DEBUG] transformed V70Mc.SPC -> V70MC.SPC
[sigmove 03:46:09 DEBUG] transformed V70Md.SPC -> V70MD.SPC
[sigmove 03:46:09 DEBUG] transformed V70Me.SPC -> V70ME.SPC
[sigmove 03:46:09 DEBUG] transformed V70Mf.SPC -> V70MF.SPC
[Status 03:46:09 INFO] data for V70 transferred to science data processing
[Tidy 03:46:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:46:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:46:09 INFO] resetting WatchDogTimer
[Status 03:46:09 INFO] Starting Set [AERI set: name W70, 6 scans, 0 angle, D16300 command]
[Ingest 03:46:09 INFO] Sending XML status message
[Status 03:46:09 INFO] Mirror angle: 0
[Mirror 03:46:09 INFO] rotating to position W
[Status 03:46:09 INFO] .SET file for ACQ96 ready
[Ingest 03:46:09 INFO] Starting acquisition
[Status 03:46:09 INFO] reading housekeeping
[Status 03:46:27 INFO] acquire complete
[Status 03:46:28 INFO] writing housekeeping
[Sequencer 03:46:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:46:28 INFO] incremented W scene to 70 completed views
[Sequencer 03:46:28 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:46:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:46:28 INFO] incremented to [AERI set: name X70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:46:28 INFO] W70.SIG(18)
[sigmove 03:46:28 DEBUG] transformed W70Ma.SPC -> W70MA.SPC
[sigmove 03:46:28 DEBUG] transformed W70Mb.SPC -> W70MB.SPC
[sigmove 03:46:28 DEBUG] transformed W70Mc.SPC -> W70MC.SPC
[sigmove 03:46:28 DEBUG] transformed W70Md.SPC -> W70MD.SPC
[sigmove 03:46:28 DEBUG] transformed W70Me.SPC -> W70ME.SPC
[sigmove 03:46:28 DEBUG] transformed W70Mf.SPC -> W70MF.SPC
[Status 03:46:28 INFO] data for W70 transferred to science data processing
[Tidy 03:46:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:46:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:46:28 INFO] resetting WatchDogTimer
[Status 03:46:28 INFO] Starting Set [AERI set: name X70, 6 scans, 0 angle, D16300 command]
[Ingest 03:46:28 INFO] Sending XML status message
[Status 03:46:28 INFO] Mirror angle: 0
[Mirror 03:46:28 INFO] rotating to position X
[Status 03:46:28 INFO] .SET file for ACQ96 ready
[Ingest 03:46:28 INFO] Starting acquisition
[Status 03:46:28 INFO] reading housekeeping
[Status 03:46:46 INFO] acquire complete
[Status 03:46:47 INFO] writing housekeeping
[Sequencer 03:46:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:46:47 INFO] incremented X scene to 70 completed views
[Sequencer 03:46:47 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:46:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:46:47 INFO] incremented to [AERI set: name Y70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:46:47 INFO] X70.SIG(18)
[sigmove 03:46:47 DEBUG] transformed X70Ma.SPC -> X70MA.SPC
[sigmove 03:46:47 DEBUG] transformed X70Mb.SPC -> X70MB.SPC
[sigmove 03:46:47 DEBUG] transformed X70Mc.SPC -> X70MC.SPC
[sigmove 03:46:47 DEBUG] transformed X70Md.SPC -> X70MD.SPC
[sigmove 03:46:47 DEBUG] transformed X70Me.SPC -> X70ME.SPC
[sigmove 03:46:47 DEBUG] transformed X70Mf.SPC -> X70MF.SPC
[Status 03:46:47 INFO] data for X70 transferred to science data processing
[Tidy 03:46:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:46:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:46:47 INFO] resetting WatchDogTimer
[Status 03:46:47 INFO] Starting Set [AERI set: name Y70, 6 scans, 0 angle, D16300 command]
[Ingest 03:46:47 INFO] Sending XML status message
[Status 03:46:47 INFO] Mirror angle: 0
[Mirror 03:46:47 INFO] rotating to position Y
[Status 03:46:47 INFO] .SET file for ACQ96 ready
[Ingest 03:46:47 INFO] Starting acquisition
[Status 03:46:47 INFO] reading housekeeping
[Status 03:47:05 INFO] acquire complete
[Status 03:47:06 INFO] writing housekeeping
[Sequencer 03:47:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:47:06 INFO] incremented Y scene to 70 completed views
[Sequencer 03:47:06 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:47:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:47:06 INFO] incremented to [AERI set: name Z70, 6 scans, 0 angle, D16300 command] set
[sigmove 03:47:06 INFO] Y70.SIG(18)
[sigmove 03:47:06 DEBUG] transformed Y70Ma.SPC -> Y70MA.SPC
[sigmove 03:47:06 DEBUG] transformed Y70Mb.SPC -> Y70MB.SPC
[sigmove 03:47:06 DEBUG] transformed Y70Mc.SPC -> Y70MC.SPC
[sigmove 03:47:06 DEBUG] transformed Y70Md.SPC -> Y70MD.SPC
[sigmove 03:47:06 DEBUG] transformed Y70Me.SPC -> Y70ME.SPC
[sigmove 03:47:06 DEBUG] transformed Y70Mf.SPC -> Y70MF.SPC
[Status 03:47:06 INFO] data for Y70 transferred to science data processing
[Tidy 03:47:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:47:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:47:06 INFO] resetting WatchDogTimer
[Status 03:47:06 INFO] Starting Set [AERI set: name Z70, 6 scans, 0 angle, D16300 command]
[Ingest 03:47:06 INFO] Sending XML status message
[Status 03:47:06 INFO] Mirror angle: 0
[Mirror 03:47:06 INFO] rotating to position Z
[Status 03:47:06 INFO] .SET file for ACQ96 ready
[Ingest 03:47:06 INFO] Starting acquisition
[Status 03:47:07 INFO] reading housekeeping
[Status 03:47:24 INFO] acquire complete
[Status 03:47:25 INFO] writing housekeeping
[Sequencer 03:47:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:47:25 INFO] incremented Z scene to 70 completed views
[Sequencer 03:47:25 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:47:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:47:25 INFO] incremented to [AERI set: name H71, 6 scans, 60 angle, D22500 command] set
[sigmove 03:47:25 INFO] Z70.SIG(18)
[sigmove 03:47:25 DEBUG] transformed Z70Ma.SPC -> Z70MA.SPC
[sigmove 03:47:25 DEBUG] transformed Z70Mb.SPC -> Z70MB.SPC
[sigmove 03:47:25 DEBUG] transformed Z70Mc.SPC -> Z70MC.SPC
[sigmove 03:47:25 DEBUG] transformed Z70Md.SPC -> Z70MD.SPC
[sigmove 03:47:25 DEBUG] transformed Z70Me.SPC -> Z70ME.SPC
[sigmove 03:47:25 DEBUG] transformed Z70Mf.SPC -> Z70MF.SPC
[Status 03:47:25 INFO] data for Z70 transferred to science data processing
[Tidy 03:47:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:47:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:47:25 INFO] resetting WatchDogTimer
[Status 03:47:25 INFO] Starting Set [AERI set: name H71, 6 scans, 60 angle, D22500 command]
[Ingest 03:47:25 INFO] Sending XML status message
[Status 03:47:25 INFO] Mirror angle: 60
[Mirror 03:47:25 INFO] rotating to position H
[Status 03:47:26 INFO] .SET file for ACQ96 ready
[Ingest 03:47:26 INFO] Starting acquisition
[Status 03:47:26 INFO] reading housekeeping
[Status 03:47:44 INFO] acquire complete
[Status 03:47:44 INFO] writing housekeeping
[Sequencer 03:47:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:47:44 INFO] incremented H scene to 71 completed views
[Sequencer 03:47:44 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:47:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:47:44 INFO] incremented to [AERI set: name A71, 6 scans, 120 angle, D28300 command] set
[sigmove 03:47:44 INFO] H71.SIG(18)
[sigmove 03:47:44 DEBUG] transformed H71Ma.SPC -> H71MA.SPC
[sigmove 03:47:44 DEBUG] transformed H71Mb.SPC -> H71MB.SPC
[sigmove 03:47:44 DEBUG] transformed H71Mc.SPC -> H71MC.SPC
[sigmove 03:47:44 DEBUG] transformed H71Md.SPC -> H71MD.SPC
[sigmove 03:47:44 DEBUG] transformed H71Me.SPC -> H71ME.SPC
[sigmove 03:47:44 DEBUG] transformed H71Mf.SPC -> H71MF.SPC
[Status 03:47:44 INFO] data for H71 transferred to science data processing
[Tidy 03:47:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:47:44 INFO] A69.FIN(19),H69.FIN(19),S69.FIN(19),T69.FIN(19),U69.FIN(19),V69.FIN(19),W69.FIN(19),X69.FIN(19),Y69.FIN(19),Z69.FIN(19),A70.FIN(19),H70.FIN(19),S70.FIN(19),T70.FIN(19),U70.FIN(19),V70.FIN(19),W70.FIN(19),X70.FIN(19),Y70.FIN(19),Z70.FIN(19)
[sigmove 03:47:44 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:47:44 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:47:46 DEBUG] done zipping
[WatchDog 03:47:46 INFO] resetting WatchDogTimer
[Status 03:47:46 INFO] Starting Set [AERI set: name A71, 6 scans, 120 angle, D28300 command]
[Ingest 03:47:46 INFO] Sending XML status message
[Status 03:47:46 INFO] Mirror angle: 120
[Mirror 03:47:46 INFO] rotating to position A
[Status 03:47:47 INFO] .SET file for ACQ96 ready
[Ingest 03:47:47 INFO] Starting acquisition
[Status 03:47:47 INFO] reading housekeeping
[Status 03:48:05 INFO] acquire complete
[Status 03:48:05 INFO] writing housekeeping
[Sequencer 03:48:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:48:05 INFO] incremented A scene to 71 completed views
[Sequencer 03:48:05 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:48:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:48:05 INFO] incremented to [AERI set: name S71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:48:05 INFO] A71.SIG(18)
[sigmove 03:48:05 DEBUG] transformed A71Ma.SPC -> A71MA.SPC
[sigmove 03:48:05 DEBUG] transformed A71Mb.SPC -> A71MB.SPC
[sigmove 03:48:05 DEBUG] transformed A71Mc.SPC -> A71MC.SPC
[sigmove 03:48:05 DEBUG] transformed A71Md.SPC -> A71MD.SPC
[sigmove 03:48:05 DEBUG] transformed A71Me.SPC -> A71ME.SPC
[sigmove 03:48:05 DEBUG] transformed A71Mf.SPC -> A71MF.SPC
[Status 03:48:05 INFO] data for A71 transferred to science data processing
[Tidy 03:48:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:48:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:48:05 INFO] resetting WatchDogTimer
[Status 03:48:05 INFO] Starting Set [AERI set: name S71, 6 scans, 0 angle, D16300 command]
[Ingest 03:48:05 INFO] Sending XML status message
[Status 03:48:05 INFO] Mirror angle: 0
[Mirror 03:48:06 INFO] rotating to position S
[Status 03:48:07 INFO] .SET file for ACQ96 ready
[Ingest 03:48:07 INFO] Starting acquisition
[Status 03:48:07 INFO] reading housekeeping
[Status 03:48:25 INFO] acquire complete
[Status 03:48:26 INFO] writing housekeeping
[Sequencer 03:48:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:48:26 INFO] incremented S scene to 71 completed views
[Sequencer 03:48:26 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:48:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:48:26 INFO] incremented to [AERI set: name T71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:48:26 INFO] S71.SIG(18)
[sigmove 03:48:26 DEBUG] transformed S71Ma.SPC -> S71MA.SPC
[sigmove 03:48:26 DEBUG] transformed S71Mb.SPC -> S71MB.SPC
[sigmove 03:48:26 DEBUG] transformed S71Mc.SPC -> S71MC.SPC
[sigmove 03:48:26 DEBUG] transformed S71Md.SPC -> S71MD.SPC
[sigmove 03:48:26 DEBUG] transformed S71Me.SPC -> S71ME.SPC
[sigmove 03:48:26 DEBUG] transformed S71Mf.SPC -> S71MF.SPC
[Status 03:48:26 INFO] data for S71 transferred to science data processing
[Tidy 03:48:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:48:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:48:26 INFO] resetting WatchDogTimer
[Status 03:48:26 INFO] Starting Set [AERI set: name T71, 6 scans, 0 angle, D16300 command]
[Ingest 03:48:26 INFO] Sending XML status message
[Status 03:48:26 INFO] Mirror angle: 0
[Mirror 03:48:26 INFO] rotating to position T
[Status 03:48:26 INFO] .SET file for ACQ96 ready
[Ingest 03:48:26 INFO] Starting acquisition
[Status 03:48:26 INFO] reading housekeeping
[Status 03:48:44 INFO] acquire complete
[Status 03:48:45 INFO] writing housekeeping
[Sequencer 03:48:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:48:45 INFO] incremented T scene to 71 completed views
[Sequencer 03:48:45 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:48:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:48:45 INFO] incremented to [AERI set: name U71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:48:45 INFO] T71.SIG(18)
[sigmove 03:48:45 DEBUG] transformed T71Ma.SPC -> T71MA.SPC
[sigmove 03:48:45 DEBUG] transformed T71Mb.SPC -> T71MB.SPC
[sigmove 03:48:45 DEBUG] transformed T71Mc.SPC -> T71MC.SPC
[sigmove 03:48:45 DEBUG] transformed T71Md.SPC -> T71MD.SPC
[sigmove 03:48:45 DEBUG] transformed T71Me.SPC -> T71ME.SPC
[sigmove 03:48:45 DEBUG] transformed T71Mf.SPC -> T71MF.SPC
[Status 03:48:45 INFO] data for T71 transferred to science data processing
[Tidy 03:48:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:48:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:48:45 INFO] resetting WatchDogTimer
[Status 03:48:45 INFO] Starting Set [AERI set: name U71, 6 scans, 0 angle, D16300 command]
[Ingest 03:48:45 INFO] Sending XML status message
[Status 03:48:45 INFO] Mirror angle: 0
[Mirror 03:48:45 INFO] rotating to position U
[Status 03:48:45 INFO] .SET file for ACQ96 ready
[Ingest 03:48:45 INFO] Starting acquisition
[Status 03:48:45 INFO] reading housekeeping
[Status 03:49:03 INFO] acquire complete
[Status 03:49:04 INFO] writing housekeeping
[Sequencer 03:49:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:49:04 INFO] incremented U scene to 71 completed views
[Sequencer 03:49:04 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:49:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:49:04 INFO] incremented to [AERI set: name V71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:49:04 INFO] U71.SIG(18)
[sigmove 03:49:04 DEBUG] transformed U71Ma.SPC -> U71MA.SPC
[sigmove 03:49:04 DEBUG] transformed U71Mb.SPC -> U71MB.SPC
[sigmove 03:49:04 DEBUG] transformed U71Mc.SPC -> U71MC.SPC
[sigmove 03:49:04 DEBUG] transformed U71Md.SPC -> U71MD.SPC
[sigmove 03:49:04 DEBUG] transformed U71Me.SPC -> U71ME.SPC
[sigmove 03:49:04 DEBUG] transformed U71Mf.SPC -> U71MF.SPC
[Status 03:49:04 INFO] data for U71 transferred to science data processing
[Tidy 03:49:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:49:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:49:04 INFO] resetting WatchDogTimer
[Status 03:49:04 INFO] Starting Set [AERI set: name V71, 6 scans, 0 angle, D16300 command]
[Ingest 03:49:04 INFO] Sending XML status message
[Status 03:49:04 INFO] Mirror angle: 0
[Mirror 03:49:04 INFO] rotating to position V
[Status 03:49:04 INFO] .SET file for ACQ96 ready
[Ingest 03:49:05 INFO] Starting acquisition
[Status 03:49:05 INFO] reading housekeeping
[Status 03:49:22 INFO] acquire complete
[Status 03:49:23 INFO] writing housekeeping
[Sequencer 03:49:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:49:23 INFO] incremented V scene to 71 completed views
[Sequencer 03:49:23 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:49:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:49:23 INFO] incremented to [AERI set: name W71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:49:23 INFO] V71.SIG(18)
[sigmove 03:49:23 DEBUG] transformed V71Ma.SPC -> V71MA.SPC
[sigmove 03:49:23 DEBUG] transformed V71Mb.SPC -> V71MB.SPC
[sigmove 03:49:23 DEBUG] transformed V71Mc.SPC -> V71MC.SPC
[sigmove 03:49:23 DEBUG] transformed V71Md.SPC -> V71MD.SPC
[sigmove 03:49:23 DEBUG] transformed V71Me.SPC -> V71ME.SPC
[sigmove 03:49:23 DEBUG] transformed V71Mf.SPC -> V71MF.SPC
[Status 03:49:23 INFO] data for V71 transferred to science data processing
[Tidy 03:49:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:49:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:49:23 INFO] resetting WatchDogTimer
[Status 03:49:23 INFO] Starting Set [AERI set: name W71, 6 scans, 0 angle, D16300 command]
[Ingest 03:49:23 INFO] Sending XML status message
[Status 03:49:23 INFO] Mirror angle: 0
[Mirror 03:49:23 INFO] rotating to position W
[Status 03:49:23 INFO] .SET file for ACQ96 ready
[Ingest 03:49:23 INFO] Starting acquisition
[Status 03:49:24 INFO] reading housekeeping
[Status 03:49:41 INFO] acquire complete
[Status 03:49:42 INFO] writing housekeeping
[Sequencer 03:49:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:49:42 INFO] incremented W scene to 71 completed views
[Sequencer 03:49:42 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:49:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:49:42 INFO] incremented to [AERI set: name X71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:49:42 INFO] W71.SIG(18)
[sigmove 03:49:42 DEBUG] transformed W71Ma.SPC -> W71MA.SPC
[sigmove 03:49:42 DEBUG] transformed W71Mb.SPC -> W71MB.SPC
[sigmove 03:49:42 DEBUG] transformed W71Mc.SPC -> W71MC.SPC
[sigmove 03:49:42 DEBUG] transformed W71Md.SPC -> W71MD.SPC
[sigmove 03:49:42 DEBUG] transformed W71Me.SPC -> W71ME.SPC
[sigmove 03:49:42 DEBUG] transformed W71Mf.SPC -> W71MF.SPC
[Status 03:49:42 INFO] data for W71 transferred to science data processing
[Tidy 03:49:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:49:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:49:42 INFO] resetting WatchDogTimer
[Status 03:49:42 INFO] Starting Set [AERI set: name X71, 6 scans, 0 angle, D16300 command]
[Ingest 03:49:42 INFO] Sending XML status message
[Status 03:49:42 INFO] Mirror angle: 0
[Mirror 03:49:42 INFO] rotating to position X
[Status 03:49:42 INFO] .SET file for ACQ96 ready
[Ingest 03:49:42 INFO] Starting acquisition
[Status 03:49:43 INFO] reading housekeeping
[Status 03:50:01 INFO] acquire complete
[Status 03:50:01 INFO] writing housekeeping
[Sequencer 03:50:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:50:01 INFO] incremented X scene to 71 completed views
[Sequencer 03:50:01 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:50:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:50:01 INFO] incremented to [AERI set: name Y71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:50:01 INFO] X71.SIG(18)
[sigmove 03:50:01 DEBUG] transformed X71Ma.SPC -> X71MA.SPC
[sigmove 03:50:01 DEBUG] transformed X71Mb.SPC -> X71MB.SPC
[sigmove 03:50:01 DEBUG] transformed X71Mc.SPC -> X71MC.SPC
[sigmove 03:50:01 DEBUG] transformed X71Md.SPC -> X71MD.SPC
[sigmove 03:50:01 DEBUG] transformed X71Me.SPC -> X71ME.SPC
[sigmove 03:50:01 DEBUG] transformed X71Mf.SPC -> X71MF.SPC
[Status 03:50:01 INFO] data for X71 transferred to science data processing
[Tidy 03:50:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:50:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:50:01 INFO] resetting WatchDogTimer
[Status 03:50:01 INFO] Starting Set [AERI set: name Y71, 6 scans, 0 angle, D16300 command]
[Ingest 03:50:01 INFO] Sending XML status message
[Status 03:50:01 INFO] Mirror angle: 0
[Mirror 03:50:01 INFO] rotating to position Y
[Status 03:50:01 INFO] .SET file for ACQ96 ready
[Ingest 03:50:02 INFO] Starting acquisition
[Status 03:50:02 INFO] reading housekeeping
[Status 03:50:20 INFO] acquire complete
[Status 03:50:20 INFO] writing housekeeping
[Sequencer 03:50:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:50:20 INFO] incremented Y scene to 71 completed views
[Sequencer 03:50:20 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:50:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:50:20 INFO] incremented to [AERI set: name Z71, 6 scans, 0 angle, D16300 command] set
[sigmove 03:50:20 INFO] Y71.SIG(18)
[sigmove 03:50:20 DEBUG] transformed Y71Ma.SPC -> Y71MA.SPC
[sigmove 03:50:20 DEBUG] transformed Y71Mb.SPC -> Y71MB.SPC
[sigmove 03:50:20 DEBUG] transformed Y71Mc.SPC -> Y71MC.SPC
[sigmove 03:50:20 DEBUG] transformed Y71Md.SPC -> Y71MD.SPC
[sigmove 03:50:20 DEBUG] transformed Y71Me.SPC -> Y71ME.SPC
[sigmove 03:50:20 DEBUG] transformed Y71Mf.SPC -> Y71MF.SPC
[Status 03:50:20 INFO] data for Y71 transferred to science data processing
[Tidy 03:50:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:50:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:50:20 INFO] resetting WatchDogTimer
[Status 03:50:20 INFO] Starting Set [AERI set: name Z71, 6 scans, 0 angle, D16300 command]
[Ingest 03:50:20 INFO] Sending XML status message
[Status 03:50:20 INFO] Mirror angle: 0
[Mirror 03:50:20 INFO] rotating to position Z
[Status 03:50:21 INFO] .SET file for ACQ96 ready
[Ingest 03:50:21 INFO] Starting acquisition
[Status 03:50:21 INFO] reading housekeeping
[Status 03:50:39 INFO] acquire complete
[Status 03:50:39 INFO] writing housekeeping
[Sequencer 03:50:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:50:39 INFO] incremented Z scene to 71 completed views
[Sequencer 03:50:39 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:50:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:50:39 INFO] incremented to [AERI set: name A72, 6 scans, 120 angle, D28300 command] set
[sigmove 03:50:39 INFO] Z71.SIG(18)
[sigmove 03:50:39 DEBUG] transformed Z71Ma.SPC -> Z71MA.SPC
[sigmove 03:50:39 DEBUG] transformed Z71Mb.SPC -> Z71MB.SPC
[sigmove 03:50:39 DEBUG] transformed Z71Mc.SPC -> Z71MC.SPC
[sigmove 03:50:39 DEBUG] transformed Z71Md.SPC -> Z71MD.SPC
[sigmove 03:50:39 DEBUG] transformed Z71Me.SPC -> Z71ME.SPC
[sigmove 03:50:39 DEBUG] transformed Z71Mf.SPC -> Z71MF.SPC
[Status 03:50:39 INFO] data for Z71 transferred to science data processing
[Tidy 03:50:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:50:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:50:39 INFO] resetting WatchDogTimer
[Status 03:50:39 INFO] Starting Set [AERI set: name A72, 6 scans, 120 angle, D28300 command]
[Ingest 03:50:39 INFO] Sending XML status message
[Status 03:50:39 INFO] Mirror angle: 120
[Mirror 03:50:39 INFO] rotating to position A
[Status 03:50:41 INFO] .SET file for ACQ96 ready
[Ingest 03:50:41 INFO] Starting acquisition
[Status 03:50:41 INFO] reading housekeeping
[Status 03:50:59 INFO] acquire complete
[Status 03:50:59 INFO] writing housekeeping
[Sequencer 03:50:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:50:59 INFO] incremented A scene to 72 completed views
[Sequencer 03:50:59 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:50:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:50:59 INFO] incremented to [AERI set: name H72, 6 scans, 60 angle, D22500 command] set
[sigmove 03:50:59 INFO] A72.SIG(18)
[sigmove 03:50:59 DEBUG] transformed A72Ma.SPC -> A72MA.SPC
[sigmove 03:50:59 DEBUG] transformed A72Mb.SPC -> A72MB.SPC
[sigmove 03:50:59 DEBUG] transformed A72Mc.SPC -> A72MC.SPC
[sigmove 03:50:59 DEBUG] transformed A72Md.SPC -> A72MD.SPC
[sigmove 03:50:59 DEBUG] transformed A72Me.SPC -> A72ME.SPC
[sigmove 03:50:59 DEBUG] transformed A72Mf.SPC -> A72MF.SPC
[Status 03:50:59 INFO] data for A72 transferred to science data processing
[Tidy 03:50:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:50:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:50:59 INFO] resetting WatchDogTimer
[Status 03:50:59 INFO] Starting Set [AERI set: name H72, 6 scans, 60 angle, D22500 command]
[Ingest 03:50:59 INFO] Sending XML status message
[Status 03:50:59 INFO] Mirror angle: 60
[Mirror 03:51:00 INFO] rotating to position H
[Status 03:51:00 INFO] .SET file for ACQ96 ready
[Ingest 03:51:00 INFO] Starting acquisition
[Status 03:51:01 INFO] reading housekeeping
[Status 03:51:18 INFO] acquire complete
[Status 03:51:18 INFO] writing housekeeping
[Sequencer 03:51:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:51:18 INFO] incremented H scene to 72 completed views
[Sequencer 03:51:18 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:51:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:51:18 INFO] incremented to [AERI set: name S72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:51:18 INFO] H72.SIG(18)
[sigmove 03:51:18 DEBUG] transformed H72Ma.SPC -> H72MA.SPC
[sigmove 03:51:18 DEBUG] transformed H72Mb.SPC -> H72MB.SPC
[sigmove 03:51:18 DEBUG] transformed H72Mc.SPC -> H72MC.SPC
[sigmove 03:51:18 DEBUG] transformed H72Md.SPC -> H72MD.SPC
[sigmove 03:51:18 DEBUG] transformed H72Me.SPC -> H72ME.SPC
[sigmove 03:51:18 DEBUG] transformed H72Mf.SPC -> H72MF.SPC
[Status 03:51:18 INFO] data for H72 transferred to science data processing
[Tidy 03:51:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:51:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:51:18 INFO] resetting WatchDogTimer
[Status 03:51:19 INFO] Starting Set [AERI set: name S72, 6 scans, 0 angle, D16300 command]
[Ingest 03:51:19 INFO] Sending XML status message
[Status 03:51:19 INFO] Mirror angle: 0
[Mirror 03:51:19 INFO] rotating to position S
[Status 03:51:19 INFO] .SET file for ACQ96 ready
[Ingest 03:51:20 INFO] Starting acquisition
[Status 03:51:20 INFO] reading housekeeping
[Status 03:51:37 INFO] acquire complete
[Status 03:51:38 INFO] writing housekeeping
[Sequencer 03:51:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:51:38 INFO] incremented S scene to 72 completed views
[Sequencer 03:51:38 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:51:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:51:38 INFO] incremented to [AERI set: name T72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:51:38 INFO] S72.SIG(18)
[sigmove 03:51:38 DEBUG] transformed S72Ma.SPC -> S72MA.SPC
[sigmove 03:51:38 DEBUG] transformed S72Mb.SPC -> S72MB.SPC
[sigmove 03:51:38 DEBUG] transformed S72Mc.SPC -> S72MC.SPC
[sigmove 03:51:38 DEBUG] transformed S72Md.SPC -> S72MD.SPC
[sigmove 03:51:38 DEBUG] transformed S72Me.SPC -> S72ME.SPC
[sigmove 03:51:38 DEBUG] transformed S72Mf.SPC -> S72MF.SPC
[Status 03:51:38 INFO] data for S72 transferred to science data processing
[Tidy 03:51:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:51:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:51:38 INFO] resetting WatchDogTimer
[Status 03:51:38 INFO] Starting Set [AERI set: name T72, 6 scans, 0 angle, D16300 command]
[Ingest 03:51:38 INFO] Sending XML status message
[Status 03:51:38 INFO] Mirror angle: 0
[Mirror 03:51:38 INFO] rotating to position T
[Status 03:51:38 INFO] .SET file for ACQ96 ready
[Ingest 03:51:38 INFO] Starting acquisition
[Status 03:51:38 INFO] reading housekeeping
[Status 03:51:56 INFO] acquire complete
[Status 03:51:57 INFO] writing housekeeping
[Sequencer 03:51:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:51:57 INFO] incremented T scene to 72 completed views
[Sequencer 03:51:57 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:51:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:51:57 INFO] incremented to [AERI set: name U72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:51:57 INFO] T72.SIG(18)
[sigmove 03:51:57 DEBUG] transformed T72Ma.SPC -> T72MA.SPC
[sigmove 03:51:57 DEBUG] transformed T72Mb.SPC -> T72MB.SPC
[sigmove 03:51:57 DEBUG] transformed T72Mc.SPC -> T72MC.SPC
[sigmove 03:51:57 DEBUG] transformed T72Md.SPC -> T72MD.SPC
[sigmove 03:51:57 DEBUG] transformed T72Me.SPC -> T72ME.SPC
[sigmove 03:51:57 DEBUG] transformed T72Mf.SPC -> T72MF.SPC
[Status 03:51:57 INFO] data for T72 transferred to science data processing
[Tidy 03:51:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:51:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:51:57 INFO] resetting WatchDogTimer
[Status 03:51:57 INFO] Starting Set [AERI set: name U72, 6 scans, 0 angle, D16300 command]
[Ingest 03:51:57 INFO] Sending XML status message
[Status 03:51:57 INFO] Mirror angle: 0
[Mirror 03:51:57 INFO] rotating to position U
[Status 03:51:57 INFO] .SET file for ACQ96 ready
[Ingest 03:51:57 INFO] Starting acquisition
[Status 03:51:57 INFO] reading housekeeping
[Status 03:52:15 INFO] acquire complete
[Status 03:52:16 INFO] writing housekeeping
[Sequencer 03:52:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:52:16 INFO] incremented U scene to 72 completed views
[Sequencer 03:52:16 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:52:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:52:16 INFO] incremented to [AERI set: name V72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:52:16 INFO] U72.SIG(18)
[sigmove 03:52:16 DEBUG] transformed U72Ma.SPC -> U72MA.SPC
[sigmove 03:52:16 DEBUG] transformed U72Mb.SPC -> U72MB.SPC
[sigmove 03:52:16 DEBUG] transformed U72Mc.SPC -> U72MC.SPC
[sigmove 03:52:16 DEBUG] transformed U72Md.SPC -> U72MD.SPC
[sigmove 03:52:16 DEBUG] transformed U72Me.SPC -> U72ME.SPC
[sigmove 03:52:16 DEBUG] transformed U72Mf.SPC -> U72MF.SPC
[Status 03:52:16 INFO] data for U72 transferred to science data processing
[Tidy 03:52:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:52:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:52:16 INFO] resetting WatchDogTimer
[Status 03:52:16 INFO] Starting Set [AERI set: name V72, 6 scans, 0 angle, D16300 command]
[Ingest 03:52:16 INFO] Sending XML status message
[Status 03:52:16 INFO] Mirror angle: 0
[Mirror 03:52:16 INFO] rotating to position V
[Status 03:52:16 INFO] .SET file for ACQ96 ready
[Ingest 03:52:16 INFO] Starting acquisition
[Status 03:52:16 INFO] reading housekeeping
[Status 03:52:34 INFO] acquire complete
[Status 03:52:35 INFO] writing housekeeping
[Sequencer 03:52:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:52:35 INFO] incremented V scene to 72 completed views
[Sequencer 03:52:35 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:52:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:52:35 INFO] incremented to [AERI set: name W72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:52:35 INFO] V72.SIG(18)
[sigmove 03:52:35 DEBUG] transformed V72Ma.SPC -> V72MA.SPC
[sigmove 03:52:35 DEBUG] transformed V72Mb.SPC -> V72MB.SPC
[sigmove 03:52:35 DEBUG] transformed V72Mc.SPC -> V72MC.SPC
[sigmove 03:52:35 DEBUG] transformed V72Md.SPC -> V72MD.SPC
[sigmove 03:52:35 DEBUG] transformed V72Me.SPC -> V72ME.SPC
[sigmove 03:52:35 DEBUG] transformed V72Mf.SPC -> V72MF.SPC
[Status 03:52:35 INFO] data for V72 transferred to science data processing
[Tidy 03:52:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:52:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:52:35 INFO] resetting WatchDogTimer
[Status 03:52:35 INFO] Starting Set [AERI set: name W72, 6 scans, 0 angle, D16300 command]
[Ingest 03:52:35 INFO] Sending XML status message
[Status 03:52:35 INFO] Mirror angle: 0
[Mirror 03:52:35 INFO] rotating to position W
[Status 03:52:35 INFO] .SET file for ACQ96 ready
[Ingest 03:52:35 INFO] Starting acquisition
[Status 03:52:35 INFO] reading housekeeping
[Status 03:52:53 INFO] acquire complete
[Status 03:52:54 INFO] writing housekeeping
[Sequencer 03:52:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:52:54 INFO] incremented W scene to 72 completed views
[Sequencer 03:52:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:52:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:52:54 INFO] incremented to [AERI set: name X72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:52:54 INFO] W72.SIG(18)
[sigmove 03:52:54 DEBUG] transformed W72Ma.SPC -> W72MA.SPC
[sigmove 03:52:54 DEBUG] transformed W72Mb.SPC -> W72MB.SPC
[sigmove 03:52:54 DEBUG] transformed W72Mc.SPC -> W72MC.SPC
[sigmove 03:52:54 DEBUG] transformed W72Md.SPC -> W72MD.SPC
[sigmove 03:52:54 DEBUG] transformed W72Me.SPC -> W72ME.SPC
[sigmove 03:52:54 DEBUG] transformed W72Mf.SPC -> W72MF.SPC
[Status 03:52:54 INFO] data for W72 transferred to science data processing
[Tidy 03:52:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:52:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:52:54 INFO] resetting WatchDogTimer
[Status 03:52:54 INFO] Starting Set [AERI set: name X72, 6 scans, 0 angle, D16300 command]
[Ingest 03:52:54 INFO] Sending XML status message
[Status 03:52:54 INFO] Mirror angle: 0
[Mirror 03:52:54 INFO] rotating to position X
[Status 03:52:54 INFO] .SET file for ACQ96 ready
[Ingest 03:52:54 INFO] Starting acquisition
[Status 03:52:55 INFO] reading housekeeping
[Status 03:53:13 INFO] acquire complete
[Status 03:53:13 INFO] writing housekeeping
[Sequencer 03:53:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:53:13 INFO] incremented X scene to 72 completed views
[Sequencer 03:53:13 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:53:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:53:13 INFO] incremented to [AERI set: name Y72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:53:13 INFO] X72.SIG(18)
[sigmove 03:53:13 DEBUG] transformed X72Ma.SPC -> X72MA.SPC
[sigmove 03:53:13 DEBUG] transformed X72Mb.SPC -> X72MB.SPC
[sigmove 03:53:13 DEBUG] transformed X72Mc.SPC -> X72MC.SPC
[sigmove 03:53:13 DEBUG] transformed X72Md.SPC -> X72MD.SPC
[sigmove 03:53:13 DEBUG] transformed X72Me.SPC -> X72ME.SPC
[sigmove 03:53:13 DEBUG] transformed X72Mf.SPC -> X72MF.SPC
[Status 03:53:13 INFO] data for X72 transferred to science data processing
[Tidy 03:53:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:53:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:53:13 INFO] resetting WatchDogTimer
[Status 03:53:13 INFO] Starting Set [AERI set: name Y72, 6 scans, 0 angle, D16300 command]
[Ingest 03:53:13 INFO] Sending XML status message
[Status 03:53:13 INFO] Mirror angle: 0
[Mirror 03:53:13 INFO] rotating to position Y
[Status 03:53:13 INFO] .SET file for ACQ96 ready
[Ingest 03:53:14 INFO] Starting acquisition
[Status 03:53:14 INFO] reading housekeeping
[Status 03:53:32 INFO] acquire complete
[Status 03:53:32 INFO] writing housekeeping
[Sequencer 03:53:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:53:32 INFO] incremented Y scene to 72 completed views
[Sequencer 03:53:32 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:53:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:53:32 INFO] incremented to [AERI set: name Z72, 6 scans, 0 angle, D16300 command] set
[sigmove 03:53:32 INFO] Y72.SIG(18)
[sigmove 03:53:32 DEBUG] transformed Y72Ma.SPC -> Y72MA.SPC
[sigmove 03:53:32 DEBUG] transformed Y72Mb.SPC -> Y72MB.SPC
[sigmove 03:53:32 DEBUG] transformed Y72Mc.SPC -> Y72MC.SPC
[sigmove 03:53:32 DEBUG] transformed Y72Md.SPC -> Y72MD.SPC
[sigmove 03:53:32 DEBUG] transformed Y72Me.SPC -> Y72ME.SPC
[sigmove 03:53:32 DEBUG] transformed Y72Mf.SPC -> Y72MF.SPC
[Status 03:53:32 INFO] data for Y72 transferred to science data processing
[Tidy 03:53:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:53:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:53:32 INFO] resetting WatchDogTimer
[Status 03:53:32 INFO] Starting Set [AERI set: name Z72, 6 scans, 0 angle, D16300 command]
[Ingest 03:53:32 INFO] Sending XML status message
[Status 03:53:32 INFO] Mirror angle: 0
[Mirror 03:53:32 INFO] rotating to position Z
[Status 03:53:33 INFO] .SET file for ACQ96 ready
[Ingest 03:53:33 INFO] Starting acquisition
[Status 03:53:33 INFO] reading housekeeping
[Status 03:53:51 INFO] acquire complete
[Status 03:53:52 INFO] writing housekeeping
[Sequencer 03:53:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:53:52 INFO] incremented Z scene to 72 completed views
[Sequencer 03:53:52 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:53:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:53:52 INFO] incremented to [AERI set: name H73, 6 scans, 60 angle, D22500 command] set
[sigmove 03:53:52 INFO] Z72.SIG(18)
[sigmove 03:53:52 DEBUG] transformed Z72Ma.SPC -> Z72MA.SPC
[sigmove 03:53:52 DEBUG] transformed Z72Mb.SPC -> Z72MB.SPC
[sigmove 03:53:52 DEBUG] transformed Z72Mc.SPC -> Z72MC.SPC
[sigmove 03:53:52 DEBUG] transformed Z72Md.SPC -> Z72MD.SPC
[sigmove 03:53:52 DEBUG] transformed Z72Me.SPC -> Z72ME.SPC
[sigmove 03:53:52 DEBUG] transformed Z72Mf.SPC -> Z72MF.SPC
[Status 03:53:52 INFO] data for Z72 transferred to science data processing
[Tidy 03:53:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:53:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:53:52 INFO] resetting WatchDogTimer
[Status 03:53:52 INFO] Starting Set [AERI set: name H73, 6 scans, 60 angle, D22500 command]
[Ingest 03:53:52 INFO] Sending XML status message
[Status 03:53:52 INFO] Mirror angle: 60
[Mirror 03:53:52 INFO] rotating to position H
[Status 03:53:53 INFO] .SET file for ACQ96 ready
[Ingest 03:53:53 INFO] Starting acquisition
[Status 03:53:53 INFO] reading housekeeping
[Status 03:54:11 INFO] acquire complete
[Status 03:54:11 INFO] writing housekeeping
[Sequencer 03:54:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:54:11 INFO] incremented H scene to 73 completed views
[Sequencer 03:54:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:54:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:54:11 INFO] incremented to [AERI set: name A73, 6 scans, 120 angle, D28300 command] set
[sigmove 03:54:11 INFO] H73.SIG(18)
[sigmove 03:54:11 DEBUG] transformed H73Ma.SPC -> H73MA.SPC
[sigmove 03:54:11 DEBUG] transformed H73Mb.SPC -> H73MB.SPC
[sigmove 03:54:11 DEBUG] transformed H73Mc.SPC -> H73MC.SPC
[sigmove 03:54:11 DEBUG] transformed H73Md.SPC -> H73MD.SPC
[sigmove 03:54:11 DEBUG] transformed H73Me.SPC -> H73ME.SPC
[sigmove 03:54:11 DEBUG] transformed H73Mf.SPC -> H73MF.SPC
[Status 03:54:11 INFO] data for H73 transferred to science data processing
[Tidy 03:54:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:54:11 INFO] A71.FIN(19),H71.FIN(19),S71.FIN(19),T71.FIN(19),U71.FIN(19),V71.FIN(19),W71.FIN(19),X71.FIN(19),Y71.FIN(19),Z71.FIN(19),A72.FIN(19),H72.FIN(19),S72.FIN(19),T72.FIN(19),U72.FIN(19),V72.FIN(19),W72.FIN(19),X72.FIN(19),Y72.FIN(19),Z72.FIN(19)
[sigmove 03:54:11 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:54:11 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 03:54:13 DEBUG] done zipping
[WatchDog 03:54:13 INFO] resetting WatchDogTimer
[Status 03:54:13 INFO] Starting Set [AERI set: name A73, 6 scans, 120 angle, D28300 command]
[Ingest 03:54:13 INFO] Sending XML status message
[Status 03:54:13 INFO] Mirror angle: 120
[Mirror 03:54:13 INFO] rotating to position A
[Status 03:54:14 INFO] .SET file for ACQ96 ready
[Ingest 03:54:14 INFO] Starting acquisition
[Status 03:54:14 INFO] reading housekeeping
[Status 03:54:32 INFO] acquire complete
[Status 03:54:33 INFO] writing housekeeping
[Sequencer 03:54:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:54:33 INFO] incremented A scene to 73 completed views
[Sequencer 03:54:33 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:54:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:54:33 INFO] incremented to [AERI set: name S73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:54:33 INFO] A73.SIG(18)
[sigmove 03:54:33 DEBUG] transformed A73Ma.SPC -> A73MA.SPC
[sigmove 03:54:33 DEBUG] transformed A73Mb.SPC -> A73MB.SPC
[sigmove 03:54:33 DEBUG] transformed A73Mc.SPC -> A73MC.SPC
[sigmove 03:54:33 DEBUG] transformed A73Md.SPC -> A73MD.SPC
[sigmove 03:54:33 DEBUG] transformed A73Me.SPC -> A73ME.SPC
[sigmove 03:54:33 DEBUG] transformed A73Mf.SPC -> A73MF.SPC
[Status 03:54:33 INFO] data for A73 transferred to science data processing
[Tidy 03:54:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:54:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:54:33 INFO] resetting WatchDogTimer
[Status 03:54:33 INFO] Starting Set [AERI set: name S73, 6 scans, 0 angle, D16300 command]
[Ingest 03:54:33 INFO] Sending XML status message
[Status 03:54:33 INFO] Mirror angle: 0
[Mirror 03:54:33 INFO] rotating to position S
[Status 03:54:34 INFO] .SET file for ACQ96 ready
[Ingest 03:54:34 INFO] Starting acquisition
[Status 03:54:34 INFO] reading housekeeping
[Status 03:54:52 INFO] acquire complete
[Status 03:54:53 INFO] writing housekeeping
[Sequencer 03:54:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:54:53 INFO] incremented S scene to 73 completed views
[Sequencer 03:54:53 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:54:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:54:53 INFO] incremented to [AERI set: name T73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:54:53 INFO] S73.SIG(18)
[sigmove 03:54:53 DEBUG] transformed S73Ma.SPC -> S73MA.SPC
[sigmove 03:54:53 DEBUG] transformed S73Mb.SPC -> S73MB.SPC
[sigmove 03:54:53 DEBUG] transformed S73Mc.SPC -> S73MC.SPC
[sigmove 03:54:53 DEBUG] transformed S73Md.SPC -> S73MD.SPC
[sigmove 03:54:53 DEBUG] transformed S73Me.SPC -> S73ME.SPC
[sigmove 03:54:53 DEBUG] transformed S73Mf.SPC -> S73MF.SPC
[Status 03:54:53 INFO] data for S73 transferred to science data processing
[Tidy 03:54:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:54:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:54:53 INFO] resetting WatchDogTimer
[Status 03:54:53 INFO] Starting Set [AERI set: name T73, 6 scans, 0 angle, D16300 command]
[Ingest 03:54:53 INFO] Sending XML status message
[Status 03:54:53 INFO] Mirror angle: 0
[Mirror 03:54:53 INFO] rotating to position T
[Status 03:54:53 INFO] .SET file for ACQ96 ready
[Ingest 03:54:54 INFO] Starting acquisition
[Status 03:54:54 INFO] reading housekeeping
[Status 03:55:12 INFO] acquire complete
[Status 03:55:12 INFO] writing housekeeping
[Sequencer 03:55:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:55:12 INFO] incremented T scene to 73 completed views
[Sequencer 03:55:12 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:55:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:55:12 INFO] incremented to [AERI set: name U73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:55:12 INFO] T73.SIG(18)
[sigmove 03:55:12 DEBUG] transformed T73Ma.SPC -> T73MA.SPC
[sigmove 03:55:12 DEBUG] transformed T73Mb.SPC -> T73MB.SPC
[sigmove 03:55:12 DEBUG] transformed T73Mc.SPC -> T73MC.SPC
[sigmove 03:55:12 DEBUG] transformed T73Md.SPC -> T73MD.SPC
[sigmove 03:55:12 DEBUG] transformed T73Me.SPC -> T73ME.SPC
[sigmove 03:55:12 DEBUG] transformed T73Mf.SPC -> T73MF.SPC
[Status 03:55:12 INFO] data for T73 transferred to science data processing
[Tidy 03:55:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:55:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:55:12 INFO] resetting WatchDogTimer
[Status 03:55:12 INFO] Starting Set [AERI set: name U73, 6 scans, 0 angle, D16300 command]
[Ingest 03:55:12 INFO] Sending XML status message
[Status 03:55:12 INFO] Mirror angle: 0
[Mirror 03:55:12 INFO] rotating to position U
[Status 03:55:12 INFO] .SET file for ACQ96 ready
[Ingest 03:55:13 INFO] Starting acquisition
[Status 03:55:13 INFO] reading housekeeping
[Status 03:55:31 INFO] acquire complete
[Status 03:55:31 INFO] writing housekeeping
[Sequencer 03:55:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:55:31 INFO] incremented U scene to 73 completed views
[Sequencer 03:55:31 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:55:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:55:31 INFO] incremented to [AERI set: name V73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:55:31 INFO] U73.SIG(18)
[sigmove 03:55:31 DEBUG] transformed U73Ma.SPC -> U73MA.SPC
[sigmove 03:55:31 DEBUG] transformed U73Mb.SPC -> U73MB.SPC
[sigmove 03:55:31 DEBUG] transformed U73Mc.SPC -> U73MC.SPC
[sigmove 03:55:31 DEBUG] transformed U73Md.SPC -> U73MD.SPC
[sigmove 03:55:31 DEBUG] transformed U73Me.SPC -> U73ME.SPC
[sigmove 03:55:31 DEBUG] transformed U73Mf.SPC -> U73MF.SPC
[Status 03:55:31 INFO] data for U73 transferred to science data processing
[Tidy 03:55:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:55:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:55:31 INFO] resetting WatchDogTimer
[Status 03:55:31 INFO] Starting Set [AERI set: name V73, 6 scans, 0 angle, D16300 command]
[Ingest 03:55:31 INFO] Sending XML status message
[Status 03:55:31 INFO] Mirror angle: 0
[Mirror 03:55:31 INFO] rotating to position V
[Status 03:55:32 INFO] .SET file for ACQ96 ready
[Ingest 03:55:32 INFO] Starting acquisition
[Status 03:55:32 INFO] reading housekeeping
[Status 03:55:50 INFO] acquire complete
[Status 03:55:50 INFO] writing housekeeping
[Sequencer 03:55:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:55:50 INFO] incremented V scene to 73 completed views
[Sequencer 03:55:50 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:55:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:55:50 INFO] incremented to [AERI set: name W73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:55:50 INFO] V73.SIG(18)
[sigmove 03:55:50 DEBUG] transformed V73Ma.SPC -> V73MA.SPC
[sigmove 03:55:50 DEBUG] transformed V73Mb.SPC -> V73MB.SPC
[sigmove 03:55:50 DEBUG] transformed V73Mc.SPC -> V73MC.SPC
[sigmove 03:55:50 DEBUG] transformed V73Md.SPC -> V73MD.SPC
[sigmove 03:55:50 DEBUG] transformed V73Me.SPC -> V73ME.SPC
[sigmove 03:55:50 DEBUG] transformed V73Mf.SPC -> V73MF.SPC
[Status 03:55:50 INFO] data for V73 transferred to science data processing
[Tidy 03:55:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:55:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:55:50 INFO] resetting WatchDogTimer
[Status 03:55:50 INFO] Starting Set [AERI set: name W73, 6 scans, 0 angle, D16300 command]
[Ingest 03:55:50 INFO] Sending XML status message
[Status 03:55:50 INFO] Mirror angle: 0
[Mirror 03:55:50 INFO] rotating to position W
[Status 03:55:51 INFO] .SET file for ACQ96 ready
[Ingest 03:55:51 INFO] Starting acquisition
[Status 03:55:51 INFO] reading housekeeping
[Status 03:56:09 INFO] acquire complete
[Status 03:56:09 INFO] writing housekeeping
[Sequencer 03:56:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:56:09 INFO] incremented W scene to 73 completed views
[Sequencer 03:56:09 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:56:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:56:09 INFO] incremented to [AERI set: name X73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:56:09 INFO] W73.SIG(18)
[sigmove 03:56:09 DEBUG] transformed W73Ma.SPC -> W73MA.SPC
[sigmove 03:56:09 DEBUG] transformed W73Mb.SPC -> W73MB.SPC
[sigmove 03:56:09 DEBUG] transformed W73Mc.SPC -> W73MC.SPC
[sigmove 03:56:09 DEBUG] transformed W73Md.SPC -> W73MD.SPC
[sigmove 03:56:09 DEBUG] transformed W73Me.SPC -> W73ME.SPC
[sigmove 03:56:09 DEBUG] transformed W73Mf.SPC -> W73MF.SPC
[Status 03:56:09 INFO] data for W73 transferred to science data processing
[Tidy 03:56:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:56:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:56:09 INFO] resetting WatchDogTimer
[Status 03:56:09 INFO] Starting Set [AERI set: name X73, 6 scans, 0 angle, D16300 command]
[Ingest 03:56:09 INFO] Sending XML status message
[Status 03:56:09 INFO] Mirror angle: 0
[Mirror 03:56:09 INFO] rotating to position X
[Status 03:56:10 INFO] .SET file for ACQ96 ready
[Ingest 03:56:10 INFO] Starting acquisition
[Status 03:56:10 INFO] reading housekeeping
[Status 03:56:28 INFO] acquire complete
[Status 03:56:28 INFO] writing housekeeping
[Sequencer 03:56:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:56:28 INFO] incremented X scene to 73 completed views
[Sequencer 03:56:28 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:56:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:56:28 INFO] incremented to [AERI set: name Y73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:56:28 INFO] X73.SIG(18)
[sigmove 03:56:28 DEBUG] transformed X73Ma.SPC -> X73MA.SPC
[sigmove 03:56:28 DEBUG] transformed X73Mb.SPC -> X73MB.SPC
[sigmove 03:56:28 DEBUG] transformed X73Mc.SPC -> X73MC.SPC
[sigmove 03:56:28 DEBUG] transformed X73Md.SPC -> X73MD.SPC
[sigmove 03:56:28 DEBUG] transformed X73Me.SPC -> X73ME.SPC
[sigmove 03:56:28 DEBUG] transformed X73Mf.SPC -> X73MF.SPC
[Status 03:56:28 INFO] data for X73 transferred to science data processing
[Tidy 03:56:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:56:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:56:28 INFO] resetting WatchDogTimer
[Status 03:56:28 INFO] Starting Set [AERI set: name Y73, 6 scans, 0 angle, D16300 command]
[Ingest 03:56:28 INFO] Sending XML status message
[Status 03:56:28 INFO] Mirror angle: 0
[Mirror 03:56:29 INFO] rotating to position Y
[Status 03:56:29 INFO] .SET file for ACQ96 ready
[Ingest 03:56:29 INFO] Starting acquisition
[Status 03:56:29 INFO] reading housekeeping
[Status 03:56:47 INFO] acquire complete
[Status 03:56:47 INFO] writing housekeeping
[Sequencer 03:56:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:56:47 INFO] incremented Y scene to 73 completed views
[Sequencer 03:56:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:56:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:56:47 INFO] incremented to [AERI set: name Z73, 6 scans, 0 angle, D16300 command] set
[sigmove 03:56:47 INFO] Y73.SIG(18)
[sigmove 03:56:47 DEBUG] transformed Y73Ma.SPC -> Y73MA.SPC
[sigmove 03:56:47 DEBUG] transformed Y73Mb.SPC -> Y73MB.SPC
[sigmove 03:56:47 DEBUG] transformed Y73Mc.SPC -> Y73MC.SPC
[sigmove 03:56:47 DEBUG] transformed Y73Md.SPC -> Y73MD.SPC
[sigmove 03:56:47 DEBUG] transformed Y73Me.SPC -> Y73ME.SPC
[sigmove 03:56:47 DEBUG] transformed Y73Mf.SPC -> Y73MF.SPC
[Status 03:56:47 INFO] data for Y73 transferred to science data processing
[Tidy 03:56:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:56:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:56:47 INFO] resetting WatchDogTimer
[Status 03:56:48 INFO] Starting Set [AERI set: name Z73, 6 scans, 0 angle, D16300 command]
[Ingest 03:56:48 INFO] Sending XML status message
[Status 03:56:48 INFO] Mirror angle: 0
[Mirror 03:56:48 INFO] rotating to position Z
[Status 03:56:48 INFO] .SET file for ACQ96 ready
[Ingest 03:56:48 INFO] Starting acquisition
[Status 03:56:48 INFO] reading housekeeping
[Status 03:57:06 INFO] acquire complete
[Status 03:57:06 INFO] writing housekeeping
[Sequencer 03:57:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:57:06 INFO] incremented Z scene to 73 completed views
[Sequencer 03:57:06 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 03:57:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:57:07 INFO] incremented to [AERI set: name A74, 6 scans, 120 angle, D28300 command] set
[sigmove 03:57:07 INFO] Z73.SIG(18)
[sigmove 03:57:07 DEBUG] transformed Z73Ma.SPC -> Z73MA.SPC
[sigmove 03:57:07 DEBUG] transformed Z73Mb.SPC -> Z73MB.SPC
[sigmove 03:57:07 DEBUG] transformed Z73Mc.SPC -> Z73MC.SPC
[sigmove 03:57:07 DEBUG] transformed Z73Md.SPC -> Z73MD.SPC
[sigmove 03:57:07 DEBUG] transformed Z73Me.SPC -> Z73ME.SPC
[sigmove 03:57:07 DEBUG] transformed Z73Mf.SPC -> Z73MF.SPC
[Status 03:57:07 INFO] data for Z73 transferred to science data processing
[Tidy 03:57:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:57:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:57:07 INFO] resetting WatchDogTimer
[Status 03:57:07 INFO] Starting Set [AERI set: name A74, 6 scans, 120 angle, D28300 command]
[Ingest 03:57:07 INFO] Sending XML status message
[Status 03:57:07 INFO] Mirror angle: 120
[Mirror 03:57:07 INFO] rotating to position A
[Status 03:57:08 INFO] .SET file for ACQ96 ready
[Ingest 03:57:08 INFO] Starting acquisition
[Status 03:57:08 INFO] reading housekeeping
[Status 03:57:26 INFO] acquire complete
[Status 03:57:27 INFO] writing housekeeping
[Sequencer 03:57:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:57:27 INFO] incremented A scene to 74 completed views
[Sequencer 03:57:27 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 03:57:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:57:27 INFO] incremented to [AERI set: name H74, 6 scans, 60 angle, D22500 command] set
[sigmove 03:57:27 INFO] A74.SIG(18)
[sigmove 03:57:27 DEBUG] transformed A74Ma.SPC -> A74MA.SPC
[sigmove 03:57:27 DEBUG] transformed A74Mb.SPC -> A74MB.SPC
[sigmove 03:57:27 DEBUG] transformed A74Mc.SPC -> A74MC.SPC
[sigmove 03:57:27 DEBUG] transformed A74Md.SPC -> A74MD.SPC
[sigmove 03:57:27 DEBUG] transformed A74Me.SPC -> A74ME.SPC
[sigmove 03:57:27 DEBUG] transformed A74Mf.SPC -> A74MF.SPC
[Status 03:57:27 INFO] data for A74 transferred to science data processing
[Tidy 03:57:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:57:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:57:27 INFO] resetting WatchDogTimer
[Status 03:57:27 INFO] Starting Set [AERI set: name H74, 6 scans, 60 angle, D22500 command]
[Ingest 03:57:27 INFO] Sending XML status message
[Status 03:57:27 INFO] Mirror angle: 60
[Mirror 03:57:27 INFO] rotating to position H
[Status 03:57:28 INFO] .SET file for ACQ96 ready
[Ingest 03:57:28 INFO] Starting acquisition
[Status 03:57:28 INFO] reading housekeeping
[Status 03:57:45 INFO] acquire complete
[Status 03:57:46 INFO] writing housekeeping
[Sequencer 03:57:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:57:46 INFO] incremented H scene to 74 completed views
[Sequencer 03:57:46 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 03:57:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:57:46 INFO] incremented to [AERI set: name S74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:57:46 INFO] H74.SIG(18)
[sigmove 03:57:46 DEBUG] transformed H74Ma.SPC -> H74MA.SPC
[sigmove 03:57:46 DEBUG] transformed H74Mb.SPC -> H74MB.SPC
[sigmove 03:57:46 DEBUG] transformed H74Mc.SPC -> H74MC.SPC
[sigmove 03:57:46 DEBUG] transformed H74Md.SPC -> H74MD.SPC
[sigmove 03:57:46 DEBUG] transformed H74Me.SPC -> H74ME.SPC
[sigmove 03:57:46 DEBUG] transformed H74Mf.SPC -> H74MF.SPC
[Status 03:57:46 INFO] data for H74 transferred to science data processing
[Tidy 03:57:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:57:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:57:46 INFO] resetting WatchDogTimer
[Status 03:57:46 INFO] Starting Set [AERI set: name S74, 6 scans, 0 angle, D16300 command]
[Ingest 03:57:46 INFO] Sending XML status message
[Status 03:57:46 INFO] Mirror angle: 0
[Mirror 03:57:46 INFO] rotating to position S
[Status 03:57:47 INFO] .SET file for ACQ96 ready
[Ingest 03:57:47 INFO] Starting acquisition
[Status 03:57:47 INFO] reading housekeeping
[Status 03:58:04 INFO] acquire complete
[Status 03:58:05 INFO] writing housekeeping
[Sequencer 03:58:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:58:05 INFO] incremented S scene to 74 completed views
[Sequencer 03:58:05 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:58:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:58:05 INFO] incremented to [AERI set: name T74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:58:05 INFO] S74.SIG(18)
[sigmove 03:58:05 DEBUG] transformed S74Ma.SPC -> S74MA.SPC
[sigmove 03:58:05 DEBUG] transformed S74Mb.SPC -> S74MB.SPC
[sigmove 03:58:05 DEBUG] transformed S74Mc.SPC -> S74MC.SPC
[sigmove 03:58:05 DEBUG] transformed S74Md.SPC -> S74MD.SPC
[sigmove 03:58:05 DEBUG] transformed S74Me.SPC -> S74ME.SPC
[sigmove 03:58:05 DEBUG] transformed S74Mf.SPC -> S74MF.SPC
[Status 03:58:05 INFO] data for S74 transferred to science data processing
[Tidy 03:58:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:58:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:58:05 INFO] resetting WatchDogTimer
[Status 03:58:05 INFO] Starting Set [AERI set: name T74, 6 scans, 0 angle, D16300 command]
[Ingest 03:58:05 INFO] Sending XML status message
[Status 03:58:05 INFO] Mirror angle: 0
[Mirror 03:58:05 INFO] rotating to position T
[Status 03:58:05 INFO] .SET file for ACQ96 ready
[Ingest 03:58:05 INFO] Starting acquisition
[Status 03:58:06 INFO] reading housekeeping
[Status 03:58:24 INFO] acquire complete
[Status 03:58:24 INFO] writing housekeeping
[Sequencer 03:58:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:58:24 INFO] incremented T scene to 74 completed views
[Sequencer 03:58:24 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:58:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:58:24 INFO] incremented to [AERI set: name U74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:58:24 INFO] T74.SIG(18)
[sigmove 03:58:24 DEBUG] transformed T74Ma.SPC -> T74MA.SPC
[sigmove 03:58:24 DEBUG] transformed T74Mb.SPC -> T74MB.SPC
[sigmove 03:58:24 DEBUG] transformed T74Mc.SPC -> T74MC.SPC
[sigmove 03:58:24 DEBUG] transformed T74Md.SPC -> T74MD.SPC
[sigmove 03:58:24 DEBUG] transformed T74Me.SPC -> T74ME.SPC
[sigmove 03:58:24 DEBUG] transformed T74Mf.SPC -> T74MF.SPC
[Status 03:58:24 INFO] data for T74 transferred to science data processing
[Tidy 03:58:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:58:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:58:24 INFO] resetting WatchDogTimer
[Status 03:58:24 INFO] Starting Set [AERI set: name U74, 6 scans, 0 angle, D16300 command]
[Ingest 03:58:24 INFO] Sending XML status message
[Status 03:58:24 INFO] Mirror angle: 0
[Mirror 03:58:24 INFO] rotating to position U
[Status 03:58:24 INFO] .SET file for ACQ96 ready
[Ingest 03:58:25 INFO] Starting acquisition
[Status 03:58:25 INFO] reading housekeeping
[Status 03:58:43 INFO] acquire complete
[Status 03:58:43 INFO] writing housekeeping
[Sequencer 03:58:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:58:43 INFO] incremented U scene to 74 completed views
[Sequencer 03:58:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:58:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:58:43 INFO] incremented to [AERI set: name V74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:58:43 INFO] U74.SIG(18)
[sigmove 03:58:43 DEBUG] transformed U74Ma.SPC -> U74MA.SPC
[sigmove 03:58:43 DEBUG] transformed U74Mb.SPC -> U74MB.SPC
[sigmove 03:58:43 DEBUG] transformed U74Mc.SPC -> U74MC.SPC
[sigmove 03:58:43 DEBUG] transformed U74Md.SPC -> U74MD.SPC
[sigmove 03:58:43 DEBUG] transformed U74Me.SPC -> U74ME.SPC
[sigmove 03:58:43 DEBUG] transformed U74Mf.SPC -> U74MF.SPC
[Status 03:58:43 INFO] data for U74 transferred to science data processing
[Tidy 03:58:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:58:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:58:43 INFO] resetting WatchDogTimer
[Status 03:58:43 INFO] Starting Set [AERI set: name V74, 6 scans, 0 angle, D16300 command]
[Ingest 03:58:43 INFO] Sending XML status message
[Status 03:58:43 INFO] Mirror angle: 0
[Mirror 03:58:43 INFO] rotating to position V
[Status 03:58:44 INFO] .SET file for ACQ96 ready
[Ingest 03:58:44 INFO] Starting acquisition
[Status 03:58:44 INFO] reading housekeeping
[Status 03:59:02 INFO] acquire complete
[Status 03:59:02 INFO] writing housekeeping
[Sequencer 03:59:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:59:02 INFO] incremented V scene to 74 completed views
[Sequencer 03:59:02 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:59:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:59:02 INFO] incremented to [AERI set: name W74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:59:02 INFO] V74.SIG(18)
[sigmove 03:59:02 DEBUG] transformed V74Ma.SPC -> V74MA.SPC
[sigmove 03:59:02 DEBUG] transformed V74Mb.SPC -> V74MB.SPC
[sigmove 03:59:02 DEBUG] transformed V74Mc.SPC -> V74MC.SPC
[sigmove 03:59:02 DEBUG] transformed V74Md.SPC -> V74MD.SPC
[sigmove 03:59:02 DEBUG] transformed V74Me.SPC -> V74ME.SPC
[sigmove 03:59:02 DEBUG] transformed V74Mf.SPC -> V74MF.SPC
[Status 03:59:02 INFO] data for V74 transferred to science data processing
[Tidy 03:59:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:59:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:59:02 INFO] resetting WatchDogTimer
[Status 03:59:02 INFO] Starting Set [AERI set: name W74, 6 scans, 0 angle, D16300 command]
[Ingest 03:59:02 INFO] Sending XML status message
[Status 03:59:02 INFO] Mirror angle: 0
[Mirror 03:59:02 INFO] rotating to position W
[Status 03:59:03 INFO] .SET file for ACQ96 ready
[Ingest 03:59:03 INFO] Starting acquisition
[Status 03:59:03 INFO] reading housekeeping
[Status 03:59:21 INFO] acquire complete
[Status 03:59:21 INFO] writing housekeeping
[Sequencer 03:59:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:59:21 INFO] incremented W scene to 74 completed views
[Sequencer 03:59:21 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:59:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:59:21 INFO] incremented to [AERI set: name X74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:59:21 INFO] W74.SIG(18)
[sigmove 03:59:21 DEBUG] transformed W74Ma.SPC -> W74MA.SPC
[sigmove 03:59:21 DEBUG] transformed W74Mb.SPC -> W74MB.SPC
[sigmove 03:59:21 DEBUG] transformed W74Mc.SPC -> W74MC.SPC
[sigmove 03:59:21 DEBUG] transformed W74Md.SPC -> W74MD.SPC
[sigmove 03:59:21 DEBUG] transformed W74Me.SPC -> W74ME.SPC
[sigmove 03:59:21 DEBUG] transformed W74Mf.SPC -> W74MF.SPC
[Status 03:59:21 INFO] data for W74 transferred to science data processing
[Tidy 03:59:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:59:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:59:21 INFO] resetting WatchDogTimer
[Status 03:59:21 INFO] Starting Set [AERI set: name X74, 6 scans, 0 angle, D16300 command]
[Ingest 03:59:21 INFO] Sending XML status message
[Status 03:59:21 INFO] Mirror angle: 0
[Mirror 03:59:21 INFO] rotating to position X
[Status 03:59:22 INFO] .SET file for ACQ96 ready
[Ingest 03:59:22 INFO] Starting acquisition
[Status 03:59:22 INFO] reading housekeeping
[Status 03:59:40 INFO] acquire complete
[Status 03:59:40 INFO] writing housekeeping
[Sequencer 03:59:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 03:59:40 INFO] incremented X scene to 74 completed views
[Sequencer 03:59:40 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 03:59:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 03:59:40 INFO] incremented to [AERI set: name Y74, 6 scans, 0 angle, D16300 command] set
[sigmove 03:59:40 INFO] X74.SIG(18)
[sigmove 03:59:40 DEBUG] transformed X74Ma.SPC -> X74MA.SPC
[sigmove 03:59:40 DEBUG] transformed X74Mb.SPC -> X74MB.SPC
[sigmove 03:59:40 DEBUG] transformed X74Mc.SPC -> X74MC.SPC
[sigmove 03:59:40 DEBUG] transformed X74Md.SPC -> X74MD.SPC
[sigmove 03:59:40 DEBUG] transformed X74Me.SPC -> X74ME.SPC
[sigmove 03:59:40 DEBUG] transformed X74Mf.SPC -> X74MF.SPC
[Status 03:59:40 INFO] data for X74 transferred to science data processing
[Tidy 03:59:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 03:59:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 03:59:40 INFO] resetting WatchDogTimer
[Status 03:59:40 INFO] Starting Set [AERI set: name Y74, 6 scans, 0 angle, D16300 command]
[Ingest 03:59:40 INFO] Sending XML status message
[Status 03:59:40 INFO] Mirror angle: 0
[Mirror 03:59:41 INFO] rotating to position Y
[Status 03:59:41 INFO] .SET file for ACQ96 ready
[Ingest 03:59:41 INFO] Starting acquisition
[Status 03:59:41 INFO] reading housekeeping
[Status 03:59:59 INFO] acquire complete
[Status 04:00:00 INFO] writing housekeeping
[Sequencer 04:00:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:00:00 INFO] incremented Y scene to 74 completed views
[Sequencer 04:00:00 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:00:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:00:00 INFO] incremented to [AERI set: name Z74, 6 scans, 0 angle, D16300 command] set
[sigmove 04:00:00 INFO] Y74.SIG(18)
[sigmove 04:00:00 DEBUG] transformed Y74Ma.SPC -> Y74MA.SPC
[sigmove 04:00:00 DEBUG] transformed Y74Mb.SPC -> Y74MB.SPC
[sigmove 04:00:00 DEBUG] transformed Y74Mc.SPC -> Y74MC.SPC
[sigmove 04:00:00 DEBUG] transformed Y74Md.SPC -> Y74MD.SPC
[sigmove 04:00:00 DEBUG] transformed Y74Me.SPC -> Y74ME.SPC
[sigmove 04:00:00 DEBUG] transformed Y74Mf.SPC -> Y74MF.SPC
[Status 04:00:00 INFO] data for Y74 transferred to science data processing
[Tidy 04:00:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:00:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:00:00 INFO] resetting WatchDogTimer
[Status 04:00:00 INFO] Starting Set [AERI set: name Z74, 6 scans, 0 angle, D16300 command]
[Ingest 04:00:00 INFO] Sending XML status message
[Status 04:00:00 INFO] Mirror angle: 0
[Mirror 04:00:01 INFO] rotating to position Z
[Status 04:00:01 INFO] .SET file for ACQ96 ready
[Ingest 04:00:01 INFO] Starting acquisition
[Status 04:00:01 INFO] reading housekeeping
[Status 04:00:19 INFO] acquire complete
[Status 04:00:20 INFO] writing housekeeping
[Sequencer 04:00:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:00:20 INFO] incremented Z scene to 74 completed views
[Sequencer 04:00:20 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:00:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:00:20 INFO] incremented to [AERI set: name H75, 6 scans, 60 angle, D22500 command] set
[sigmove 04:00:20 INFO] Z74.SIG(18)
[sigmove 04:00:20 DEBUG] transformed Z74Ma.SPC -> Z74MA.SPC
[sigmove 04:00:20 DEBUG] transformed Z74Mb.SPC -> Z74MB.SPC
[sigmove 04:00:20 DEBUG] transformed Z74Mc.SPC -> Z74MC.SPC
[sigmove 04:00:20 DEBUG] transformed Z74Md.SPC -> Z74MD.SPC
[sigmove 04:00:20 DEBUG] transformed Z74Me.SPC -> Z74ME.SPC
[sigmove 04:00:20 DEBUG] transformed Z74Mf.SPC -> Z74MF.SPC
[Status 04:00:20 INFO] data for Z74 transferred to science data processing
[Tidy 04:00:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:00:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:00:20 INFO] resetting WatchDogTimer
[Status 04:00:20 INFO] Starting Set [AERI set: name H75, 6 scans, 60 angle, D22500 command]
[Ingest 04:00:20 INFO] Sending XML status message
[Status 04:00:20 INFO] Mirror angle: 60
[Mirror 04:00:20 INFO] rotating to position H
[Status 04:00:21 INFO] .SET file for ACQ96 ready
[Ingest 04:00:21 INFO] Starting acquisition
[Status 04:00:21 INFO] reading housekeeping
[Status 04:00:38 INFO] acquire complete
[Status 04:00:39 INFO] writing housekeeping
[Sequencer 04:00:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:00:39 INFO] incremented H scene to 75 completed views
[Sequencer 04:00:39 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:00:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:00:39 INFO] incremented to [AERI set: name A75, 6 scans, 120 angle, D28300 command] set
[sigmove 04:00:39 INFO] H75.SIG(18)
[sigmove 04:00:39 DEBUG] transformed H75Ma.SPC -> H75MA.SPC
[sigmove 04:00:39 DEBUG] transformed H75Mb.SPC -> H75MB.SPC
[sigmove 04:00:39 DEBUG] transformed H75Mc.SPC -> H75MC.SPC
[sigmove 04:00:39 DEBUG] transformed H75Md.SPC -> H75MD.SPC
[sigmove 04:00:39 DEBUG] transformed H75Me.SPC -> H75ME.SPC
[sigmove 04:00:39 DEBUG] transformed H75Mf.SPC -> H75MF.SPC
[Status 04:00:39 INFO] data for H75 transferred to science data processing
[Tidy 04:00:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:00:39 INFO] A73.FIN(19),H73.FIN(19),S73.FIN(19),T73.FIN(19),U73.FIN(19),V73.FIN(19),W73.FIN(19),X73.FIN(19),Y73.FIN(19),Z73.FIN(19),A74.FIN(19),H74.FIN(19),S74.FIN(19),T74.FIN(19),U74.FIN(19),V74.FIN(19),W74.FIN(19),X74.FIN(19),Y74.FIN(19),Z74.FIN(19)
[sigmove 04:00:39 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:00:39 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:00:40 DEBUG] done zipping
[WatchDog 04:00:40 INFO] resetting WatchDogTimer
[Status 04:00:41 INFO] Starting Set [AERI set: name A75, 6 scans, 120 angle, D28300 command]
[Ingest 04:00:41 INFO] Sending XML status message
[Status 04:00:41 INFO] Mirror angle: 120
[Mirror 04:00:41 INFO] rotating to position A
[Status 04:00:42 INFO] .SET file for ACQ96 ready
[Ingest 04:00:42 INFO] Starting acquisition
[Status 04:00:42 INFO] reading housekeeping
[Status 04:01:00 INFO] acquire complete
[Status 04:01:00 INFO] writing housekeeping
[Sequencer 04:01:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:01:00 INFO] incremented A scene to 75 completed views
[Sequencer 04:01:00 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:01:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:01:00 INFO] incremented to [AERI set: name S75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:01:00 INFO] A75.SIG(18)
[sigmove 04:01:00 DEBUG] transformed A75Ma.SPC -> A75MA.SPC
[sigmove 04:01:00 DEBUG] transformed A75Mb.SPC -> A75MB.SPC
[sigmove 04:01:00 DEBUG] transformed A75Mc.SPC -> A75MC.SPC
[sigmove 04:01:00 DEBUG] transformed A75Md.SPC -> A75MD.SPC
[sigmove 04:01:00 DEBUG] transformed A75Me.SPC -> A75ME.SPC
[sigmove 04:01:00 DEBUG] transformed A75Mf.SPC -> A75MF.SPC
[Status 04:01:00 INFO] data for A75 transferred to science data processing
[Tidy 04:01:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:01:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:01:00 INFO] resetting WatchDogTimer
[Status 04:01:00 INFO] Starting Set [AERI set: name S75, 6 scans, 0 angle, D16300 command]
[Ingest 04:01:00 INFO] Sending XML status message
[Status 04:01:00 INFO] Mirror angle: 0
[Mirror 04:01:00 INFO] rotating to position S
[Status 04:01:02 INFO] .SET file for ACQ96 ready
[Ingest 04:01:02 INFO] Starting acquisition
[Status 04:01:02 INFO] reading housekeeping
[Status 04:01:20 INFO] acquire complete
[Status 04:01:20 INFO] writing housekeeping
[Sequencer 04:01:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:01:20 INFO] incremented S scene to 75 completed views
[Sequencer 04:01:20 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:01:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:01:20 INFO] incremented to [AERI set: name T75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:01:20 INFO] S75.SIG(18)
[sigmove 04:01:20 DEBUG] transformed S75Ma.SPC -> S75MA.SPC
[sigmove 04:01:20 DEBUG] transformed S75Mb.SPC -> S75MB.SPC
[sigmove 04:01:20 DEBUG] transformed S75Mc.SPC -> S75MC.SPC
[sigmove 04:01:20 DEBUG] transformed S75Md.SPC -> S75MD.SPC
[sigmove 04:01:20 DEBUG] transformed S75Me.SPC -> S75ME.SPC
[sigmove 04:01:20 DEBUG] transformed S75Mf.SPC -> S75MF.SPC
[Status 04:01:20 INFO] data for S75 transferred to science data processing
[Tidy 04:01:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:01:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:01:20 INFO] resetting WatchDogTimer
[Status 04:01:21 INFO] Starting Set [AERI set: name T75, 6 scans, 0 angle, D16300 command]
[Ingest 04:01:21 INFO] Sending XML status message
[Status 04:01:21 INFO] Mirror angle: 0
[Mirror 04:01:21 INFO] rotating to position T
[Status 04:01:21 INFO] .SET file for ACQ96 ready
[Ingest 04:01:21 INFO] Starting acquisition
[Status 04:01:21 INFO] reading housekeeping
[Status 04:01:39 INFO] acquire complete
[Status 04:01:39 INFO] writing housekeeping
[Sequencer 04:01:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:01:39 INFO] incremented T scene to 75 completed views
[Sequencer 04:01:39 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:01:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:01:39 INFO] incremented to [AERI set: name U75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:01:39 INFO] T75.SIG(18)
[sigmove 04:01:39 DEBUG] transformed T75Ma.SPC -> T75MA.SPC
[sigmove 04:01:39 DEBUG] transformed T75Mb.SPC -> T75MB.SPC
[sigmove 04:01:39 DEBUG] transformed T75Mc.SPC -> T75MC.SPC
[sigmove 04:01:39 DEBUG] transformed T75Md.SPC -> T75MD.SPC
[sigmove 04:01:39 DEBUG] transformed T75Me.SPC -> T75ME.SPC
[sigmove 04:01:39 DEBUG] transformed T75Mf.SPC -> T75MF.SPC
[Status 04:01:39 INFO] data for T75 transferred to science data processing
[Tidy 04:01:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:01:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:01:39 INFO] resetting WatchDogTimer
[Status 04:01:40 INFO] Starting Set [AERI set: name U75, 6 scans, 0 angle, D16300 command]
[Ingest 04:01:40 INFO] Sending XML status message
[Status 04:01:40 INFO] Mirror angle: 0
[Mirror 04:01:40 INFO] rotating to position U
[Status 04:01:40 INFO] .SET file for ACQ96 ready
[Ingest 04:01:40 INFO] Starting acquisition
[Status 04:01:40 INFO] reading housekeeping
[Status 04:01:58 INFO] acquire complete
[Status 04:01:58 INFO] writing housekeeping
[Sequencer 04:01:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:01:58 INFO] incremented U scene to 75 completed views
[Sequencer 04:01:58 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:01:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:01:58 INFO] incremented to [AERI set: name V75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:01:58 INFO] U75.SIG(18)
[sigmove 04:01:58 DEBUG] transformed U75Ma.SPC -> U75MA.SPC
[sigmove 04:01:58 DEBUG] transformed U75Mb.SPC -> U75MB.SPC
[sigmove 04:01:58 DEBUG] transformed U75Mc.SPC -> U75MC.SPC
[sigmove 04:01:58 DEBUG] transformed U75Md.SPC -> U75MD.SPC
[sigmove 04:01:58 DEBUG] transformed U75Me.SPC -> U75ME.SPC
[sigmove 04:01:58 DEBUG] transformed U75Mf.SPC -> U75MF.SPC
[Status 04:01:58 INFO] data for U75 transferred to science data processing
[Tidy 04:01:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:01:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:01:58 INFO] resetting WatchDogTimer
[Status 04:01:59 INFO] Starting Set [AERI set: name V75, 6 scans, 0 angle, D16300 command]
[Ingest 04:01:59 INFO] Sending XML status message
[Status 04:01:59 INFO] Mirror angle: 0
[Mirror 04:01:59 INFO] rotating to position V
[Status 04:01:59 INFO] .SET file for ACQ96 ready
[Ingest 04:01:59 INFO] Starting acquisition
[Status 04:01:59 INFO] reading housekeeping
[Status 04:02:17 INFO] acquire complete
[Status 04:02:17 INFO] writing housekeeping
[Sequencer 04:02:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:02:17 INFO] incremented V scene to 75 completed views
[Sequencer 04:02:17 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:02:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:02:17 INFO] incremented to [AERI set: name W75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:02:18 INFO] V75.SIG(18)
[sigmove 04:02:18 DEBUG] transformed V75Ma.SPC -> V75MA.SPC
[sigmove 04:02:18 DEBUG] transformed V75Mb.SPC -> V75MB.SPC
[sigmove 04:02:18 DEBUG] transformed V75Mc.SPC -> V75MC.SPC
[sigmove 04:02:18 DEBUG] transformed V75Md.SPC -> V75MD.SPC
[sigmove 04:02:18 DEBUG] transformed V75Me.SPC -> V75ME.SPC
[sigmove 04:02:18 DEBUG] transformed V75Mf.SPC -> V75MF.SPC
[Status 04:02:18 INFO] data for V75 transferred to science data processing
[Tidy 04:02:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:02:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:02:18 INFO] resetting WatchDogTimer
[Status 04:02:18 INFO] Starting Set [AERI set: name W75, 6 scans, 0 angle, D16300 command]
[Ingest 04:02:18 INFO] Sending XML status message
[Status 04:02:18 INFO] Mirror angle: 0
[Mirror 04:02:18 INFO] rotating to position W
[Status 04:02:18 INFO] .SET file for ACQ96 ready
[Ingest 04:02:18 INFO] Starting acquisition
[Status 04:02:18 INFO] reading housekeeping
[Status 04:02:36 INFO] acquire complete
[Status 04:02:37 INFO] writing housekeeping
[Sequencer 04:02:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:02:37 INFO] incremented W scene to 75 completed views
[Sequencer 04:02:37 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:02:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:02:37 INFO] incremented to [AERI set: name X75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:02:37 INFO] W75.SIG(18)
[sigmove 04:02:37 DEBUG] transformed W75Ma.SPC -> W75MA.SPC
[sigmove 04:02:37 DEBUG] transformed W75Mb.SPC -> W75MB.SPC
[sigmove 04:02:37 DEBUG] transformed W75Mc.SPC -> W75MC.SPC
[sigmove 04:02:37 DEBUG] transformed W75Md.SPC -> W75MD.SPC
[sigmove 04:02:37 DEBUG] transformed W75Me.SPC -> W75ME.SPC
[sigmove 04:02:37 DEBUG] transformed W75Mf.SPC -> W75MF.SPC
[Status 04:02:37 INFO] data for W75 transferred to science data processing
[Tidy 04:02:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:02:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:02:37 INFO] resetting WatchDogTimer
[Status 04:02:37 INFO] Starting Set [AERI set: name X75, 6 scans, 0 angle, D16300 command]
[Ingest 04:02:37 INFO] Sending XML status message
[Status 04:02:37 INFO] Mirror angle: 0
[Mirror 04:02:37 INFO] rotating to position X
[Status 04:02:37 INFO] .SET file for ACQ96 ready
[Ingest 04:02:37 INFO] Starting acquisition
[Status 04:02:37 INFO] reading housekeeping
[Status 04:02:55 INFO] acquire complete
[Status 04:02:56 INFO] writing housekeeping
[Sequencer 04:02:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:02:56 INFO] incremented X scene to 75 completed views
[Sequencer 04:02:56 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:02:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:02:56 INFO] incremented to [AERI set: name Y75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:02:56 INFO] X75.SIG(18)
[sigmove 04:02:56 DEBUG] transformed X75Ma.SPC -> X75MA.SPC
[sigmove 04:02:56 DEBUG] transformed X75Mb.SPC -> X75MB.SPC
[sigmove 04:02:56 DEBUG] transformed X75Mc.SPC -> X75MC.SPC
[sigmove 04:02:56 DEBUG] transformed X75Md.SPC -> X75MD.SPC
[sigmove 04:02:56 DEBUG] transformed X75Me.SPC -> X75ME.SPC
[sigmove 04:02:56 DEBUG] transformed X75Mf.SPC -> X75MF.SPC
[Status 04:02:56 INFO] data for X75 transferred to science data processing
[Tidy 04:02:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:02:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:02:56 INFO] resetting WatchDogTimer
[Status 04:02:56 INFO] Starting Set [AERI set: name Y75, 6 scans, 0 angle, D16300 command]
[Ingest 04:02:56 INFO] Sending XML status message
[Status 04:02:56 INFO] Mirror angle: 0
[Mirror 04:02:56 INFO] rotating to position Y
[Status 04:02:56 INFO] .SET file for ACQ96 ready
[Ingest 04:02:56 INFO] Starting acquisition
[Status 04:02:56 INFO] reading housekeeping
[Status 04:03:14 INFO] acquire complete
[Status 04:03:15 INFO] writing housekeeping
[Sequencer 04:03:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:03:15 INFO] incremented Y scene to 75 completed views
[Sequencer 04:03:15 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:03:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:03:15 INFO] incremented to [AERI set: name Z75, 6 scans, 0 angle, D16300 command] set
[sigmove 04:03:15 INFO] Y75.SIG(18)
[sigmove 04:03:15 DEBUG] transformed Y75Ma.SPC -> Y75MA.SPC
[sigmove 04:03:15 DEBUG] transformed Y75Mb.SPC -> Y75MB.SPC
[sigmove 04:03:15 DEBUG] transformed Y75Mc.SPC -> Y75MC.SPC
[sigmove 04:03:15 DEBUG] transformed Y75Md.SPC -> Y75MD.SPC
[sigmove 04:03:15 DEBUG] transformed Y75Me.SPC -> Y75ME.SPC
[sigmove 04:03:15 DEBUG] transformed Y75Mf.SPC -> Y75MF.SPC
[Status 04:03:15 INFO] data for Y75 transferred to science data processing
[Tidy 04:03:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:03:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:03:15 INFO] resetting WatchDogTimer
[Status 04:03:15 INFO] Starting Set [AERI set: name Z75, 6 scans, 0 angle, D16300 command]
[Ingest 04:03:15 INFO] Sending XML status message
[Status 04:03:15 INFO] Mirror angle: 0
[Mirror 04:03:15 INFO] rotating to position Z
[Status 04:03:15 INFO] .SET file for ACQ96 ready
[Ingest 04:03:15 INFO] Starting acquisition
[Status 04:03:16 INFO] reading housekeeping
[Status 04:03:33 INFO] acquire complete
[Status 04:03:34 INFO] writing housekeeping
[Sequencer 04:03:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:03:34 INFO] incremented Z scene to 75 completed views
[Sequencer 04:03:34 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:03:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:03:34 INFO] incremented to [AERI set: name A76, 6 scans, 120 angle, D28300 command] set
[sigmove 04:03:34 INFO] Z75.SIG(18)
[sigmove 04:03:34 DEBUG] transformed Z75Ma.SPC -> Z75MA.SPC
[sigmove 04:03:34 DEBUG] transformed Z75Mb.SPC -> Z75MB.SPC
[sigmove 04:03:34 DEBUG] transformed Z75Mc.SPC -> Z75MC.SPC
[sigmove 04:03:34 DEBUG] transformed Z75Md.SPC -> Z75MD.SPC
[sigmove 04:03:34 DEBUG] transformed Z75Me.SPC -> Z75ME.SPC
[sigmove 04:03:34 DEBUG] transformed Z75Mf.SPC -> Z75MF.SPC
[Status 04:03:34 INFO] data for Z75 transferred to science data processing
[Tidy 04:03:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:03:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:03:34 INFO] resetting WatchDogTimer
[Status 04:03:34 INFO] Starting Set [AERI set: name A76, 6 scans, 120 angle, D28300 command]
[Ingest 04:03:34 INFO] Sending XML status message
[Status 04:03:34 INFO] Mirror angle: 120
[Mirror 04:03:34 INFO] rotating to position A
[Status 04:03:35 INFO] .SET file for ACQ96 ready
[Ingest 04:03:36 INFO] Starting acquisition
[Status 04:03:36 INFO] reading housekeeping
[Status 04:03:54 INFO] acquire complete
[Status 04:03:54 INFO] writing housekeeping
[Sequencer 04:03:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:03:54 INFO] incremented A scene to 76 completed views
[Sequencer 04:03:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:03:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:03:54 INFO] incremented to [AERI set: name H76, 6 scans, 60 angle, D22500 command] set
[sigmove 04:03:54 INFO] A76.SIG(18)
[sigmove 04:03:54 DEBUG] transformed A76Ma.SPC -> A76MA.SPC
[sigmove 04:03:54 DEBUG] transformed A76Mb.SPC -> A76MB.SPC
[sigmove 04:03:54 DEBUG] transformed A76Mc.SPC -> A76MC.SPC
[sigmove 04:03:54 DEBUG] transformed A76Md.SPC -> A76MD.SPC
[sigmove 04:03:54 DEBUG] transformed A76Me.SPC -> A76ME.SPC
[sigmove 04:03:54 DEBUG] transformed A76Mf.SPC -> A76MF.SPC
[Status 04:03:54 INFO] data for A76 transferred to science data processing
[Tidy 04:03:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:03:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:03:54 INFO] resetting WatchDogTimer
[Status 04:03:54 INFO] Starting Set [AERI set: name H76, 6 scans, 60 angle, D22500 command]
[Ingest 04:03:54 INFO] Sending XML status message
[Status 04:03:54 INFO] Mirror angle: 60
[Mirror 04:03:54 INFO] rotating to position H
[Status 04:03:55 INFO] .SET file for ACQ96 ready
[Ingest 04:03:55 INFO] Starting acquisition
[Status 04:03:55 INFO] reading housekeeping
[Status 04:04:13 INFO] acquire complete
[Status 04:04:13 INFO] writing housekeeping
[Sequencer 04:04:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:04:13 INFO] incremented H scene to 76 completed views
[Sequencer 04:04:13 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:04:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:04:13 INFO] incremented to [AERI set: name S76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:04:13 INFO] H76.SIG(18)
[sigmove 04:04:13 DEBUG] transformed H76Ma.SPC -> H76MA.SPC
[sigmove 04:04:13 DEBUG] transformed H76Mb.SPC -> H76MB.SPC
[sigmove 04:04:13 DEBUG] transformed H76Mc.SPC -> H76MC.SPC
[sigmove 04:04:13 DEBUG] transformed H76Md.SPC -> H76MD.SPC
[sigmove 04:04:13 DEBUG] transformed H76Me.SPC -> H76ME.SPC
[sigmove 04:04:13 DEBUG] transformed H76Mf.SPC -> H76MF.SPC
[Status 04:04:13 INFO] data for H76 transferred to science data processing
[Tidy 04:04:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:04:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:04:13 INFO] resetting WatchDogTimer
[Status 04:04:13 INFO] Starting Set [AERI set: name S76, 6 scans, 0 angle, D16300 command]
[Ingest 04:04:13 INFO] Sending XML status message
[Status 04:04:13 INFO] Mirror angle: 0
[Mirror 04:04:13 INFO] rotating to position S
[Status 04:04:14 INFO] .SET file for ACQ96 ready
[Ingest 04:04:14 INFO] Starting acquisition
[Status 04:04:14 INFO] reading housekeeping
[Status 04:04:33 INFO] acquire complete
[Status 04:04:33 INFO] writing housekeeping
[Sequencer 04:04:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:04:33 INFO] incremented S scene to 76 completed views
[Sequencer 04:04:33 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:04:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:04:33 INFO] incremented to [AERI set: name T76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:04:33 INFO] S76.SIG(18)
[sigmove 04:04:33 DEBUG] transformed S76Ma.SPC -> S76MA.SPC
[sigmove 04:04:33 DEBUG] transformed S76Mb.SPC -> S76MB.SPC
[sigmove 04:04:33 DEBUG] transformed S76Mc.SPC -> S76MC.SPC
[sigmove 04:04:33 DEBUG] transformed S76Md.SPC -> S76MD.SPC
[sigmove 04:04:33 DEBUG] transformed S76Me.SPC -> S76ME.SPC
[sigmove 04:04:33 DEBUG] transformed S76Mf.SPC -> S76MF.SPC
[Status 04:04:33 INFO] data for S76 transferred to science data processing
[Tidy 04:04:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:04:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:04:33 INFO] resetting WatchDogTimer
[Status 04:04:33 INFO] Starting Set [AERI set: name T76, 6 scans, 0 angle, D16300 command]
[Ingest 04:04:34 INFO] Sending XML status message
[Status 04:04:34 INFO] Mirror angle: 0
[Mirror 04:04:34 INFO] rotating to position T
[Status 04:04:34 INFO] .SET file for ACQ96 ready
[Ingest 04:04:34 INFO] Starting acquisition
[Status 04:04:34 INFO] reading housekeeping
[Status 04:04:52 INFO] acquire complete
[Status 04:04:52 INFO] writing housekeeping
[Sequencer 04:04:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:04:52 INFO] incremented T scene to 76 completed views
[Sequencer 04:04:52 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:04:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:04:52 INFO] incremented to [AERI set: name U76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:04:52 INFO] T76.SIG(18)
[sigmove 04:04:52 DEBUG] transformed T76Ma.SPC -> T76MA.SPC
[sigmove 04:04:52 DEBUG] transformed T76Mb.SPC -> T76MB.SPC
[sigmove 04:04:52 DEBUG] transformed T76Mc.SPC -> T76MC.SPC
[sigmove 04:04:52 DEBUG] transformed T76Md.SPC -> T76MD.SPC
[sigmove 04:04:52 DEBUG] transformed T76Me.SPC -> T76ME.SPC
[sigmove 04:04:52 DEBUG] transformed T76Mf.SPC -> T76MF.SPC
[Status 04:04:52 INFO] data for T76 transferred to science data processing
[Tidy 04:04:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:04:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:04:52 INFO] resetting WatchDogTimer
[Status 04:04:53 INFO] Starting Set [AERI set: name U76, 6 scans, 0 angle, D16300 command]
[Ingest 04:04:53 INFO] Sending XML status message
[Status 04:04:53 INFO] Mirror angle: 0
[Mirror 04:04:53 INFO] rotating to position U
[Status 04:04:53 INFO] .SET file for ACQ96 ready
[Ingest 04:04:53 INFO] Starting acquisition
[Status 04:04:53 INFO] reading housekeeping
[Status 04:05:11 INFO] acquire complete
[Status 04:05:12 INFO] writing housekeeping
[Sequencer 04:05:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:05:12 INFO] incremented U scene to 76 completed views
[Sequencer 04:05:12 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:05:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:05:12 INFO] incremented to [AERI set: name V76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:05:12 INFO] U76.SIG(18)
[sigmove 04:05:12 DEBUG] transformed U76Ma.SPC -> U76MA.SPC
[sigmove 04:05:12 DEBUG] transformed U76Mb.SPC -> U76MB.SPC
[sigmove 04:05:12 DEBUG] transformed U76Mc.SPC -> U76MC.SPC
[sigmove 04:05:12 DEBUG] transformed U76Md.SPC -> U76MD.SPC
[sigmove 04:05:12 DEBUG] transformed U76Me.SPC -> U76ME.SPC
[sigmove 04:05:12 DEBUG] transformed U76Mf.SPC -> U76MF.SPC
[Status 04:05:12 INFO] data for U76 transferred to science data processing
[Tidy 04:05:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:05:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:05:12 INFO] resetting WatchDogTimer
[Status 04:05:12 INFO] Starting Set [AERI set: name V76, 6 scans, 0 angle, D16300 command]
[Ingest 04:05:12 INFO] Sending XML status message
[Status 04:05:12 INFO] Mirror angle: 0
[Mirror 04:05:12 INFO] rotating to position V
[Status 04:05:12 INFO] .SET file for ACQ96 ready
[Ingest 04:05:12 INFO] Starting acquisition
[Status 04:05:12 INFO] reading housekeeping
[Status 04:05:30 INFO] acquire complete
[Status 04:05:31 INFO] writing housekeeping
[Sequencer 04:05:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:05:31 INFO] incremented V scene to 76 completed views
[Sequencer 04:05:31 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:05:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:05:31 INFO] incremented to [AERI set: name W76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:05:31 INFO] V76.SIG(18)
[sigmove 04:05:31 DEBUG] transformed V76Ma.SPC -> V76MA.SPC
[sigmove 04:05:31 DEBUG] transformed V76Mb.SPC -> V76MB.SPC
[sigmove 04:05:31 DEBUG] transformed V76Mc.SPC -> V76MC.SPC
[sigmove 04:05:31 DEBUG] transformed V76Md.SPC -> V76MD.SPC
[sigmove 04:05:31 DEBUG] transformed V76Me.SPC -> V76ME.SPC
[sigmove 04:05:31 DEBUG] transformed V76Mf.SPC -> V76MF.SPC
[Status 04:05:31 INFO] data for V76 transferred to science data processing
[Tidy 04:05:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:05:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:05:31 INFO] resetting WatchDogTimer
[Status 04:05:31 INFO] Starting Set [AERI set: name W76, 6 scans, 0 angle, D16300 command]
[Ingest 04:05:31 INFO] Sending XML status message
[Status 04:05:31 INFO] Mirror angle: 0
[Mirror 04:05:31 INFO] rotating to position W
[Status 04:05:31 INFO] .SET file for ACQ96 ready
[Ingest 04:05:31 INFO] Starting acquisition
[Status 04:05:31 INFO] reading housekeeping
[Status 04:05:49 INFO] acquire complete
[Status 04:05:50 INFO] writing housekeeping
[Sequencer 04:05:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:05:50 INFO] incremented W scene to 76 completed views
[Sequencer 04:05:50 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:05:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:05:50 INFO] incremented to [AERI set: name X76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:05:50 INFO] W76.SIG(18)
[sigmove 04:05:50 DEBUG] transformed W76Ma.SPC -> W76MA.SPC
[sigmove 04:05:50 DEBUG] transformed W76Mb.SPC -> W76MB.SPC
[sigmove 04:05:50 DEBUG] transformed W76Mc.SPC -> W76MC.SPC
[sigmove 04:05:50 DEBUG] transformed W76Md.SPC -> W76MD.SPC
[sigmove 04:05:50 DEBUG] transformed W76Me.SPC -> W76ME.SPC
[sigmove 04:05:50 DEBUG] transformed W76Mf.SPC -> W76MF.SPC
[Status 04:05:50 INFO] data for W76 transferred to science data processing
[Tidy 04:05:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:05:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:05:50 INFO] resetting WatchDogTimer
[Status 04:05:50 INFO] Starting Set [AERI set: name X76, 6 scans, 0 angle, D16300 command]
[Ingest 04:05:50 INFO] Sending XML status message
[Status 04:05:50 INFO] Mirror angle: 0
[Mirror 04:05:50 INFO] rotating to position X
[Status 04:05:50 INFO] .SET file for ACQ96 ready
[Ingest 04:05:50 INFO] Starting acquisition
[Status 04:05:50 INFO] reading housekeeping
[Status 04:06:08 INFO] acquire complete
[Status 04:06:09 INFO] writing housekeeping
[Sequencer 04:06:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:06:09 INFO] incremented X scene to 76 completed views
[Sequencer 04:06:09 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:06:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:06:09 INFO] incremented to [AERI set: name Y76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:06:09 INFO] X76.SIG(18)
[sigmove 04:06:09 DEBUG] transformed X76Ma.SPC -> X76MA.SPC
[sigmove 04:06:09 DEBUG] transformed X76Mb.SPC -> X76MB.SPC
[sigmove 04:06:09 DEBUG] transformed X76Mc.SPC -> X76MC.SPC
[sigmove 04:06:09 DEBUG] transformed X76Md.SPC -> X76MD.SPC
[sigmove 04:06:09 DEBUG] transformed X76Me.SPC -> X76ME.SPC
[sigmove 04:06:09 DEBUG] transformed X76Mf.SPC -> X76MF.SPC
[Status 04:06:09 INFO] data for X76 transferred to science data processing
[Tidy 04:06:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:06:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:06:09 INFO] resetting WatchDogTimer
[Status 04:06:09 INFO] Starting Set [AERI set: name Y76, 6 scans, 0 angle, D16300 command]
[Ingest 04:06:09 INFO] Sending XML status message
[Status 04:06:09 INFO] Mirror angle: 0
[Mirror 04:06:09 INFO] rotating to position Y
[Status 04:06:09 INFO] .SET file for ACQ96 ready
[Ingest 04:06:09 INFO] Starting acquisition
[Status 04:06:10 INFO] reading housekeeping
[Status 04:06:27 INFO] acquire complete
[Status 04:06:28 INFO] writing housekeeping
[Sequencer 04:06:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:06:28 INFO] incremented Y scene to 76 completed views
[Sequencer 04:06:28 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:06:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:06:28 INFO] incremented to [AERI set: name Z76, 6 scans, 0 angle, D16300 command] set
[sigmove 04:06:28 INFO] Y76.SIG(18)
[sigmove 04:06:28 DEBUG] transformed Y76Ma.SPC -> Y76MA.SPC
[sigmove 04:06:28 DEBUG] transformed Y76Mb.SPC -> Y76MB.SPC
[sigmove 04:06:28 DEBUG] transformed Y76Mc.SPC -> Y76MC.SPC
[sigmove 04:06:28 DEBUG] transformed Y76Md.SPC -> Y76MD.SPC
[sigmove 04:06:28 DEBUG] transformed Y76Me.SPC -> Y76ME.SPC
[sigmove 04:06:28 DEBUG] transformed Y76Mf.SPC -> Y76MF.SPC
[Status 04:06:28 INFO] data for Y76 transferred to science data processing
[Tidy 04:06:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:06:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:06:28 INFO] resetting WatchDogTimer
[Status 04:06:28 INFO] Starting Set [AERI set: name Z76, 6 scans, 0 angle, D16300 command]
[Ingest 04:06:28 INFO] Sending XML status message
[Status 04:06:28 INFO] Mirror angle: 0
[Mirror 04:06:28 INFO] rotating to position Z
[Status 04:06:28 INFO] .SET file for ACQ96 ready
[Ingest 04:06:29 INFO] Starting acquisition
[Status 04:06:29 INFO] reading housekeeping
[Status 04:06:47 INFO] acquire complete
[Status 04:06:47 INFO] writing housekeeping
[Sequencer 04:06:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:06:47 INFO] incremented Z scene to 76 completed views
[Sequencer 04:06:47 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:06:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:06:47 INFO] incremented to [AERI set: name H77, 6 scans, 60 angle, D22500 command] set
[sigmove 04:06:47 INFO] Z76.SIG(18)
[sigmove 04:06:47 DEBUG] transformed Z76Ma.SPC -> Z76MA.SPC
[sigmove 04:06:47 DEBUG] transformed Z76Mb.SPC -> Z76MB.SPC
[sigmove 04:06:47 DEBUG] transformed Z76Mc.SPC -> Z76MC.SPC
[sigmove 04:06:47 DEBUG] transformed Z76Md.SPC -> Z76MD.SPC
[sigmove 04:06:47 DEBUG] transformed Z76Me.SPC -> Z76ME.SPC
[sigmove 04:06:47 DEBUG] transformed Z76Mf.SPC -> Z76MF.SPC
[Status 04:06:47 INFO] data for Z76 transferred to science data processing
[Tidy 04:06:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:06:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:06:47 INFO] resetting WatchDogTimer
[Status 04:06:47 INFO] Starting Set [AERI set: name H77, 6 scans, 60 angle, D22500 command]
[Ingest 04:06:47 INFO] Sending XML status message
[Status 04:06:47 INFO] Mirror angle: 60
[Mirror 04:06:47 INFO] rotating to position H
[Status 04:06:48 INFO] .SET file for ACQ96 ready
[Ingest 04:06:48 INFO] Starting acquisition
[Status 04:06:48 INFO] reading housekeeping
[Status 04:07:06 INFO] acquire complete
[Status 04:07:06 INFO] writing housekeeping
[Sequencer 04:07:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:07:06 INFO] incremented H scene to 77 completed views
[Sequencer 04:07:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:07:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:07:06 INFO] incremented to [AERI set: name A77, 6 scans, 120 angle, D28300 command] set
[sigmove 04:07:06 INFO] H77.SIG(18)
[sigmove 04:07:06 DEBUG] transformed H77Ma.SPC -> H77MA.SPC
[sigmove 04:07:06 DEBUG] transformed H77Mb.SPC -> H77MB.SPC
[sigmove 04:07:06 DEBUG] transformed H77Mc.SPC -> H77MC.SPC
[sigmove 04:07:06 DEBUG] transformed H77Md.SPC -> H77MD.SPC
[sigmove 04:07:06 DEBUG] transformed H77Me.SPC -> H77ME.SPC
[sigmove 04:07:06 DEBUG] transformed H77Mf.SPC -> H77MF.SPC
[Status 04:07:06 INFO] data for H77 transferred to science data processing
[Tidy 04:07:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:07:06 INFO] A75.FIN(19),H75.FIN(19),S75.FIN(19),T75.FIN(19),U75.FIN(19),V75.FIN(19),W75.FIN(19),X75.FIN(19),Y75.FIN(19),Z75.FIN(19),A76.FIN(19),H76.FIN(19),S76.FIN(19),T76.FIN(19),U76.FIN(19),V76.FIN(19),W76.FIN(19),X76.FIN(19),Y76.FIN(19),Z76.FIN(19)
[sigmove 04:07:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:07:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:07:08 DEBUG] done zipping
[WatchDog 04:07:08 INFO] resetting WatchDogTimer
[Status 04:07:08 INFO] Starting Set [AERI set: name A77, 6 scans, 120 angle, D28300 command]
[Ingest 04:07:08 INFO] Sending XML status message
[Status 04:07:08 INFO] Mirror angle: 120
[Mirror 04:07:08 INFO] rotating to position A
[Status 04:07:09 INFO] .SET file for ACQ96 ready
[Ingest 04:07:09 INFO] Starting acquisition
[Status 04:07:09 INFO] reading housekeeping
[Status 04:07:27 INFO] acquire complete
[Status 04:07:27 INFO] writing housekeeping
[Sequencer 04:07:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:07:27 INFO] incremented A scene to 77 completed views
[Sequencer 04:07:27 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:07:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:07:27 INFO] incremented to [AERI set: name S77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:07:27 INFO] A77.SIG(18)
[sigmove 04:07:27 DEBUG] transformed A77Ma.SPC -> A77MA.SPC
[sigmove 04:07:27 DEBUG] transformed A77Mb.SPC -> A77MB.SPC
[sigmove 04:07:27 DEBUG] transformed A77Mc.SPC -> A77MC.SPC
[sigmove 04:07:27 DEBUG] transformed A77Md.SPC -> A77MD.SPC
[sigmove 04:07:27 DEBUG] transformed A77Me.SPC -> A77ME.SPC
[sigmove 04:07:27 DEBUG] transformed A77Mf.SPC -> A77MF.SPC
[Status 04:07:27 INFO] data for A77 transferred to science data processing
[Tidy 04:07:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:07:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:07:27 INFO] resetting WatchDogTimer
[Status 04:07:28 INFO] Starting Set [AERI set: name S77, 6 scans, 0 angle, D16300 command]
[Ingest 04:07:28 INFO] Sending XML status message
[Status 04:07:28 INFO] Mirror angle: 0
[Mirror 04:07:28 INFO] rotating to position S
[Status 04:07:29 INFO] .SET file for ACQ96 ready
[Ingest 04:07:29 INFO] Starting acquisition
[Status 04:07:29 INFO] reading housekeeping
[Status 04:07:47 INFO] acquire complete
[Status 04:07:48 INFO] writing housekeeping
[Sequencer 04:07:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:07:48 INFO] incremented S scene to 77 completed views
[Sequencer 04:07:48 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:07:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:07:48 INFO] incremented to [AERI set: name T77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:07:48 INFO] S77.SIG(18)
[sigmove 04:07:48 DEBUG] transformed S77Ma.SPC -> S77MA.SPC
[sigmove 04:07:48 DEBUG] transformed S77Mb.SPC -> S77MB.SPC
[sigmove 04:07:48 DEBUG] transformed S77Mc.SPC -> S77MC.SPC
[sigmove 04:07:48 DEBUG] transformed S77Md.SPC -> S77MD.SPC
[sigmove 04:07:48 DEBUG] transformed S77Me.SPC -> S77ME.SPC
[sigmove 04:07:48 DEBUG] transformed S77Mf.SPC -> S77MF.SPC
[Status 04:07:48 INFO] data for S77 transferred to science data processing
[Tidy 04:07:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:07:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:07:48 INFO] resetting WatchDogTimer
[Status 04:07:48 INFO] Starting Set [AERI set: name T77, 6 scans, 0 angle, D16300 command]
[Ingest 04:07:48 INFO] Sending XML status message
[Status 04:07:48 INFO] Mirror angle: 0
[Mirror 04:07:48 INFO] rotating to position T
[Status 04:07:48 INFO] .SET file for ACQ96 ready
[Ingest 04:07:48 INFO] Starting acquisition
[Status 04:07:48 INFO] reading housekeeping
[Status 04:08:06 INFO] acquire complete
[Status 04:08:07 INFO] writing housekeeping
[Sequencer 04:08:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:08:07 INFO] incremented T scene to 77 completed views
[Sequencer 04:08:07 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:08:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:08:07 INFO] incremented to [AERI set: name U77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:08:07 INFO] T77.SIG(18)
[sigmove 04:08:07 DEBUG] transformed T77Ma.SPC -> T77MA.SPC
[sigmove 04:08:07 DEBUG] transformed T77Mb.SPC -> T77MB.SPC
[sigmove 04:08:07 DEBUG] transformed T77Mc.SPC -> T77MC.SPC
[sigmove 04:08:07 DEBUG] transformed T77Md.SPC -> T77MD.SPC
[sigmove 04:08:07 DEBUG] transformed T77Me.SPC -> T77ME.SPC
[sigmove 04:08:07 DEBUG] transformed T77Mf.SPC -> T77MF.SPC
[Status 04:08:07 INFO] data for T77 transferred to science data processing
[Tidy 04:08:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:08:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:08:07 INFO] resetting WatchDogTimer
[Status 04:08:07 INFO] Starting Set [AERI set: name U77, 6 scans, 0 angle, D16300 command]
[Ingest 04:08:07 INFO] Sending XML status message
[Status 04:08:07 INFO] Mirror angle: 0
[Mirror 04:08:07 INFO] rotating to position U
[Status 04:08:08 INFO] .SET file for ACQ96 ready
[Ingest 04:08:08 INFO] Starting acquisition
[Status 04:08:08 INFO] reading housekeeping
[Status 04:08:25 INFO] acquire complete
[Status 04:08:26 INFO] writing housekeeping
[Sequencer 04:08:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:08:26 INFO] incremented U scene to 77 completed views
[Sequencer 04:08:26 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:08:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:08:26 INFO] incremented to [AERI set: name V77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:08:26 INFO] U77.SIG(18)
[sigmove 04:08:26 DEBUG] transformed U77Ma.SPC -> U77MA.SPC
[sigmove 04:08:26 DEBUG] transformed U77Mb.SPC -> U77MB.SPC
[sigmove 04:08:26 DEBUG] transformed U77Mc.SPC -> U77MC.SPC
[sigmove 04:08:26 DEBUG] transformed U77Md.SPC -> U77MD.SPC
[sigmove 04:08:26 DEBUG] transformed U77Me.SPC -> U77ME.SPC
[sigmove 04:08:26 DEBUG] transformed U77Mf.SPC -> U77MF.SPC
[Status 04:08:26 INFO] data for U77 transferred to science data processing
[Tidy 04:08:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:08:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:08:26 INFO] resetting WatchDogTimer
[Status 04:08:26 INFO] Starting Set [AERI set: name V77, 6 scans, 0 angle, D16300 command]
[Ingest 04:08:26 INFO] Sending XML status message
[Status 04:08:26 INFO] Mirror angle: 0
[Mirror 04:08:26 INFO] rotating to position V
[Status 04:08:26 INFO] .SET file for ACQ96 ready
[Ingest 04:08:26 INFO] Starting acquisition
[Status 04:08:27 INFO] reading housekeeping
[Status 04:08:44 INFO] acquire complete
[Status 04:08:45 INFO] writing housekeeping
[Sequencer 04:08:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:08:45 INFO] incremented V scene to 77 completed views
[Sequencer 04:08:45 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:08:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:08:45 INFO] incremented to [AERI set: name W77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:08:45 INFO] V77.SIG(18)
[sigmove 04:08:45 DEBUG] transformed V77Ma.SPC -> V77MA.SPC
[sigmove 04:08:45 DEBUG] transformed V77Mb.SPC -> V77MB.SPC
[sigmove 04:08:45 DEBUG] transformed V77Mc.SPC -> V77MC.SPC
[sigmove 04:08:45 DEBUG] transformed V77Md.SPC -> V77MD.SPC
[sigmove 04:08:45 DEBUG] transformed V77Me.SPC -> V77ME.SPC
[sigmove 04:08:45 DEBUG] transformed V77Mf.SPC -> V77MF.SPC
[Status 04:08:45 INFO] data for V77 transferred to science data processing
[Tidy 04:08:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:08:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:08:45 INFO] resetting WatchDogTimer
[Status 04:08:45 INFO] Starting Set [AERI set: name W77, 6 scans, 0 angle, D16300 command]
[Ingest 04:08:45 INFO] Sending XML status message
[Status 04:08:45 INFO] Mirror angle: 0
[Mirror 04:08:45 INFO] rotating to position W
[Status 04:08:45 INFO] .SET file for ACQ96 ready
[Ingest 04:08:46 INFO] Starting acquisition
[Status 04:08:46 INFO] reading housekeeping
[Status 04:09:04 INFO] acquire complete
[Status 04:09:04 INFO] writing housekeeping
[Sequencer 04:09:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:09:04 INFO] incremented W scene to 77 completed views
[Sequencer 04:09:04 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:09:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:09:04 INFO] incremented to [AERI set: name X77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:09:04 INFO] W77.SIG(18)
[sigmove 04:09:04 DEBUG] transformed W77Ma.SPC -> W77MA.SPC
[sigmove 04:09:04 DEBUG] transformed W77Mb.SPC -> W77MB.SPC
[sigmove 04:09:04 DEBUG] transformed W77Mc.SPC -> W77MC.SPC
[sigmove 04:09:04 DEBUG] transformed W77Md.SPC -> W77MD.SPC
[sigmove 04:09:04 DEBUG] transformed W77Me.SPC -> W77ME.SPC
[sigmove 04:09:04 DEBUG] transformed W77Mf.SPC -> W77MF.SPC
[Status 04:09:04 INFO] data for W77 transferred to science data processing
[Tidy 04:09:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:09:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:09:04 INFO] resetting WatchDogTimer
[Status 04:09:04 INFO] Starting Set [AERI set: name X77, 6 scans, 0 angle, D16300 command]
[Ingest 04:09:04 INFO] Sending XML status message
[Status 04:09:04 INFO] Mirror angle: 0
[Mirror 04:09:04 INFO] rotating to position X
[Status 04:09:04 INFO] .SET file for ACQ96 ready
[Ingest 04:09:05 INFO] Starting acquisition
[Status 04:09:05 INFO] reading housekeeping
[Status 04:09:23 INFO] acquire complete
[Status 04:09:23 INFO] writing housekeeping
[Sequencer 04:09:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:09:23 INFO] incremented X scene to 77 completed views
[Sequencer 04:09:23 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:09:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:09:23 INFO] incremented to [AERI set: name Y77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:09:23 INFO] X77.SIG(18)
[sigmove 04:09:23 DEBUG] transformed X77Ma.SPC -> X77MA.SPC
[sigmove 04:09:23 DEBUG] transformed X77Mb.SPC -> X77MB.SPC
[sigmove 04:09:23 DEBUG] transformed X77Mc.SPC -> X77MC.SPC
[sigmove 04:09:23 DEBUG] transformed X77Md.SPC -> X77MD.SPC
[sigmove 04:09:23 DEBUG] transformed X77Me.SPC -> X77ME.SPC
[sigmove 04:09:23 DEBUG] transformed X77Mf.SPC -> X77MF.SPC
[Status 04:09:23 INFO] data for X77 transferred to science data processing
[Tidy 04:09:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:09:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:09:23 INFO] resetting WatchDogTimer
[Status 04:09:23 INFO] Starting Set [AERI set: name Y77, 6 scans, 0 angle, D16300 command]
[Ingest 04:09:23 INFO] Sending XML status message
[Status 04:09:23 INFO] Mirror angle: 0
[Mirror 04:09:23 INFO] rotating to position Y
[Status 04:09:24 INFO] .SET file for ACQ96 ready
[Ingest 04:09:24 INFO] Starting acquisition
[Status 04:09:24 INFO] reading housekeeping
[Status 04:09:42 INFO] acquire complete
[Status 04:09:42 INFO] writing housekeeping
[Sequencer 04:09:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:09:42 INFO] incremented Y scene to 77 completed views
[Sequencer 04:09:42 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:09:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:09:42 INFO] incremented to [AERI set: name Z77, 6 scans, 0 angle, D16300 command] set
[sigmove 04:09:42 INFO] Y77.SIG(18)
[sigmove 04:09:42 DEBUG] transformed Y77Ma.SPC -> Y77MA.SPC
[sigmove 04:09:42 DEBUG] transformed Y77Mb.SPC -> Y77MB.SPC
[sigmove 04:09:42 DEBUG] transformed Y77Mc.SPC -> Y77MC.SPC
[sigmove 04:09:42 DEBUG] transformed Y77Md.SPC -> Y77MD.SPC
[sigmove 04:09:42 DEBUG] transformed Y77Me.SPC -> Y77ME.SPC
[sigmove 04:09:42 DEBUG] transformed Y77Mf.SPC -> Y77MF.SPC
[Status 04:09:42 INFO] data for Y77 transferred to science data processing
[Tidy 04:09:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:09:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:09:42 INFO] resetting WatchDogTimer
[Status 04:09:42 INFO] Starting Set [AERI set: name Z77, 6 scans, 0 angle, D16300 command]
[Ingest 04:09:42 INFO] Sending XML status message
[Status 04:09:42 INFO] Mirror angle: 0
[Mirror 04:09:42 INFO] rotating to position Z
[Status 04:09:43 INFO] .SET file for ACQ96 ready
[Ingest 04:09:43 INFO] Starting acquisition
[Status 04:09:43 INFO] reading housekeeping
[Status 04:10:01 INFO] acquire complete
[Status 04:10:01 INFO] writing housekeeping
[Sequencer 04:10:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:10:01 INFO] incremented Z scene to 77 completed views
[Sequencer 04:10:01 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:10:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:10:01 INFO] incremented to [AERI set: name A78, 6 scans, 120 angle, D28300 command] set
[sigmove 04:10:01 INFO] Z77.SIG(18)
[sigmove 04:10:01 DEBUG] transformed Z77Ma.SPC -> Z77MA.SPC
[sigmove 04:10:01 DEBUG] transformed Z77Mb.SPC -> Z77MB.SPC
[sigmove 04:10:01 DEBUG] transformed Z77Mc.SPC -> Z77MC.SPC
[sigmove 04:10:01 DEBUG] transformed Z77Md.SPC -> Z77MD.SPC
[sigmove 04:10:01 DEBUG] transformed Z77Me.SPC -> Z77ME.SPC
[sigmove 04:10:01 DEBUG] transformed Z77Mf.SPC -> Z77MF.SPC
[Status 04:10:01 INFO] data for Z77 transferred to science data processing
[Tidy 04:10:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:10:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:10:01 INFO] resetting WatchDogTimer
[Status 04:10:01 INFO] Starting Set [AERI set: name A78, 6 scans, 120 angle, D28300 command]
[Ingest 04:10:01 INFO] Sending XML status message
[Status 04:10:01 INFO] Mirror angle: 120
[Mirror 04:10:01 INFO] rotating to position A
[Status 04:10:03 INFO] .SET file for ACQ96 ready
[Ingest 04:10:03 INFO] Starting acquisition
[Status 04:10:03 INFO] reading housekeeping
[Status 04:10:21 INFO] acquire complete
[Status 04:10:21 INFO] writing housekeeping
[Sequencer 04:10:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:10:21 INFO] incremented A scene to 78 completed views
[Sequencer 04:10:21 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:10:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:10:21 INFO] incremented to [AERI set: name H78, 6 scans, 60 angle, D22500 command] set
[sigmove 04:10:21 INFO] A78.SIG(18)
[sigmove 04:10:21 DEBUG] transformed A78Ma.SPC -> A78MA.SPC
[sigmove 04:10:21 DEBUG] transformed A78Mb.SPC -> A78MB.SPC
[sigmove 04:10:21 DEBUG] transformed A78Mc.SPC -> A78MC.SPC
[sigmove 04:10:21 DEBUG] transformed A78Md.SPC -> A78MD.SPC
[sigmove 04:10:21 DEBUG] transformed A78Me.SPC -> A78ME.SPC
[sigmove 04:10:21 DEBUG] transformed A78Mf.SPC -> A78MF.SPC
[Status 04:10:21 INFO] data for A78 transferred to science data processing
[Tidy 04:10:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:10:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:10:21 INFO] resetting WatchDogTimer
[Status 04:10:22 INFO] Starting Set [AERI set: name H78, 6 scans, 60 angle, D22500 command]
[Ingest 04:10:22 INFO] Sending XML status message
[Status 04:10:22 INFO] Mirror angle: 60
[Mirror 04:10:22 INFO] rotating to position H
[Status 04:10:22 INFO] .SET file for ACQ96 ready
[Ingest 04:10:23 INFO] Starting acquisition
[Status 04:10:23 INFO] reading housekeeping
[Status 04:10:40 INFO] acquire complete
[Status 04:10:40 INFO] writing housekeeping
[Sequencer 04:10:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:10:40 INFO] incremented H scene to 78 completed views
[Sequencer 04:10:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:10:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:10:40 INFO] incremented to [AERI set: name S78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:10:40 INFO] H78.SIG(18)
[sigmove 04:10:41 DEBUG] transformed H78Ma.SPC -> H78MA.SPC
[sigmove 04:10:41 DEBUG] transformed H78Mb.SPC -> H78MB.SPC
[sigmove 04:10:41 DEBUG] transformed H78Mc.SPC -> H78MC.SPC
[sigmove 04:10:41 DEBUG] transformed H78Md.SPC -> H78MD.SPC
[sigmove 04:10:41 DEBUG] transformed H78Me.SPC -> H78ME.SPC
[sigmove 04:10:41 DEBUG] transformed H78Mf.SPC -> H78MF.SPC
[Status 04:10:41 INFO] data for H78 transferred to science data processing
[Tidy 04:10:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:10:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:10:41 INFO] resetting WatchDogTimer
[Status 04:10:41 INFO] Starting Set [AERI set: name S78, 6 scans, 0 angle, D16300 command]
[Ingest 04:10:41 INFO] Sending XML status message
[Status 04:10:41 INFO] Mirror angle: 0
[Mirror 04:10:41 INFO] rotating to position S
[Status 04:10:42 INFO] .SET file for ACQ96 ready
[Ingest 04:10:42 INFO] Starting acquisition
[Status 04:10:42 INFO] reading housekeeping
[Status 04:10:59 INFO] acquire complete
[Status 04:11:00 INFO] writing housekeeping
[Sequencer 04:11:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:11:00 INFO] incremented S scene to 78 completed views
[Sequencer 04:11:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:11:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:11:00 INFO] incremented to [AERI set: name T78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:11:00 INFO] S78.SIG(18)
[sigmove 04:11:00 DEBUG] transformed S78Ma.SPC -> S78MA.SPC
[sigmove 04:11:00 DEBUG] transformed S78Mb.SPC -> S78MB.SPC
[sigmove 04:11:00 DEBUG] transformed S78Mc.SPC -> S78MC.SPC
[sigmove 04:11:00 DEBUG] transformed S78Md.SPC -> S78MD.SPC
[sigmove 04:11:00 DEBUG] transformed S78Me.SPC -> S78ME.SPC
[sigmove 04:11:00 DEBUG] transformed S78Mf.SPC -> S78MF.SPC
[Status 04:11:00 INFO] data for S78 transferred to science data processing
[Tidy 04:11:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:11:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:11:00 INFO] resetting WatchDogTimer
[Status 04:11:00 INFO] Starting Set [AERI set: name T78, 6 scans, 0 angle, D16300 command]
[Ingest 04:11:00 INFO] Sending XML status message
[Status 04:11:00 INFO] Mirror angle: 0
[Mirror 04:11:00 INFO] rotating to position T
[Status 04:11:00 INFO] .SET file for ACQ96 ready
[Ingest 04:11:00 INFO] Starting acquisition
[Status 04:11:00 INFO] reading housekeeping
[Status 04:11:18 INFO] acquire complete
[Status 04:11:19 INFO] writing housekeeping
[Sequencer 04:11:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:11:19 INFO] incremented T scene to 78 completed views
[Sequencer 04:11:19 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:11:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:11:19 INFO] incremented to [AERI set: name U78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:11:19 INFO] T78.SIG(18)
[sigmove 04:11:19 DEBUG] transformed T78Ma.SPC -> T78MA.SPC
[sigmove 04:11:19 DEBUG] transformed T78Mb.SPC -> T78MB.SPC
[sigmove 04:11:19 DEBUG] transformed T78Mc.SPC -> T78MC.SPC
[sigmove 04:11:19 DEBUG] transformed T78Md.SPC -> T78MD.SPC
[sigmove 04:11:19 DEBUG] transformed T78Me.SPC -> T78ME.SPC
[sigmove 04:11:19 DEBUG] transformed T78Mf.SPC -> T78MF.SPC
[Status 04:11:19 INFO] data for T78 transferred to science data processing
[Tidy 04:11:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:11:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:11:19 INFO] resetting WatchDogTimer
[Status 04:11:19 INFO] Starting Set [AERI set: name U78, 6 scans, 0 angle, D16300 command]
[Ingest 04:11:19 INFO] Sending XML status message
[Status 04:11:19 INFO] Mirror angle: 0
[Mirror 04:11:19 INFO] rotating to position U
[Status 04:11:19 INFO] .SET file for ACQ96 ready
[Ingest 04:11:19 INFO] Starting acquisition
[Status 04:11:19 INFO] reading housekeeping
[Status 04:11:37 INFO] acquire complete
[Status 04:11:38 INFO] writing housekeeping
[Sequencer 04:11:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:11:38 INFO] incremented U scene to 78 completed views
[Sequencer 04:11:38 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:11:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:11:38 INFO] incremented to [AERI set: name V78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:11:38 INFO] U78.SIG(18)
[sigmove 04:11:38 DEBUG] transformed U78Ma.SPC -> U78MA.SPC
[sigmove 04:11:38 DEBUG] transformed U78Mb.SPC -> U78MB.SPC
[sigmove 04:11:38 DEBUG] transformed U78Mc.SPC -> U78MC.SPC
[sigmove 04:11:38 DEBUG] transformed U78Md.SPC -> U78MD.SPC
[sigmove 04:11:38 DEBUG] transformed U78Me.SPC -> U78ME.SPC
[sigmove 04:11:38 DEBUG] transformed U78Mf.SPC -> U78MF.SPC
[Status 04:11:38 INFO] data for U78 transferred to science data processing
[Tidy 04:11:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:11:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:11:38 INFO] resetting WatchDogTimer
[Status 04:11:38 INFO] Starting Set [AERI set: name V78, 6 scans, 0 angle, D16300 command]
[Ingest 04:11:38 INFO] Sending XML status message
[Status 04:11:38 INFO] Mirror angle: 0
[Mirror 04:11:38 INFO] rotating to position V
[Status 04:11:38 INFO] .SET file for ACQ96 ready
[Ingest 04:11:38 INFO] Starting acquisition
[Status 04:11:39 INFO] reading housekeeping
[Status 04:11:56 INFO] acquire complete
[Status 04:11:57 INFO] writing housekeeping
[Sequencer 04:11:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:11:57 INFO] incremented V scene to 78 completed views
[Sequencer 04:11:57 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:11:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:11:57 INFO] incremented to [AERI set: name W78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:11:57 INFO] V78.SIG(18)
[sigmove 04:11:57 DEBUG] transformed V78Ma.SPC -> V78MA.SPC
[sigmove 04:11:57 DEBUG] transformed V78Mb.SPC -> V78MB.SPC
[sigmove 04:11:57 DEBUG] transformed V78Mc.SPC -> V78MC.SPC
[sigmove 04:11:57 DEBUG] transformed V78Md.SPC -> V78MD.SPC
[sigmove 04:11:57 DEBUG] transformed V78Me.SPC -> V78ME.SPC
[sigmove 04:11:57 DEBUG] transformed V78Mf.SPC -> V78MF.SPC
[Status 04:11:57 INFO] data for V78 transferred to science data processing
[Tidy 04:11:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:11:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:11:57 INFO] resetting WatchDogTimer
[Status 04:11:57 INFO] Starting Set [AERI set: name W78, 6 scans, 0 angle, D16300 command]
[Ingest 04:11:57 INFO] Sending XML status message
[Status 04:11:57 INFO] Mirror angle: 0
[Mirror 04:11:57 INFO] rotating to position W
[Status 04:11:57 INFO] .SET file for ACQ96 ready
[Ingest 04:11:57 INFO] Starting acquisition
[Status 04:11:58 INFO] reading housekeeping
[Status 04:12:15 INFO] acquire complete
[Status 04:12:16 INFO] writing housekeeping
[Sequencer 04:12:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:12:16 INFO] incremented W scene to 78 completed views
[Sequencer 04:12:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:12:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:12:16 INFO] incremented to [AERI set: name X78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:12:16 INFO] W78.SIG(18)
[sigmove 04:12:16 DEBUG] transformed W78Ma.SPC -> W78MA.SPC
[sigmove 04:12:16 DEBUG] transformed W78Mb.SPC -> W78MB.SPC
[sigmove 04:12:16 DEBUG] transformed W78Mc.SPC -> W78MC.SPC
[sigmove 04:12:16 DEBUG] transformed W78Md.SPC -> W78MD.SPC
[sigmove 04:12:16 DEBUG] transformed W78Me.SPC -> W78ME.SPC
[sigmove 04:12:16 DEBUG] transformed W78Mf.SPC -> W78MF.SPC
[Status 04:12:16 INFO] data for W78 transferred to science data processing
[Tidy 04:12:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:12:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:12:16 INFO] resetting WatchDogTimer
[Status 04:12:16 INFO] Starting Set [AERI set: name X78, 6 scans, 0 angle, D16300 command]
[Ingest 04:12:16 INFO] Sending XML status message
[Status 04:12:16 INFO] Mirror angle: 0
[Mirror 04:12:16 INFO] rotating to position X
[Status 04:12:16 INFO] .SET file for ACQ96 ready
[Ingest 04:12:17 INFO] Starting acquisition
[Status 04:12:17 INFO] reading housekeeping
[Status 04:12:35 INFO] acquire complete
[Status 04:12:35 INFO] writing housekeeping
[Sequencer 04:12:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:12:35 INFO] incremented X scene to 78 completed views
[Sequencer 04:12:35 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:12:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:12:35 INFO] incremented to [AERI set: name Y78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:12:35 INFO] X78.SIG(18)
[sigmove 04:12:35 DEBUG] transformed X78Ma.SPC -> X78MA.SPC
[sigmove 04:12:35 DEBUG] transformed X78Mb.SPC -> X78MB.SPC
[sigmove 04:12:35 DEBUG] transformed X78Mc.SPC -> X78MC.SPC
[sigmove 04:12:35 DEBUG] transformed X78Md.SPC -> X78MD.SPC
[sigmove 04:12:35 DEBUG] transformed X78Me.SPC -> X78ME.SPC
[sigmove 04:12:35 DEBUG] transformed X78Mf.SPC -> X78MF.SPC
[Status 04:12:35 INFO] data for X78 transferred to science data processing
[Tidy 04:12:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:12:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:12:35 INFO] resetting WatchDogTimer
[Status 04:12:35 INFO] Starting Set [AERI set: name Y78, 6 scans, 0 angle, D16300 command]
[Ingest 04:12:35 INFO] Sending XML status message
[Status 04:12:35 INFO] Mirror angle: 0
[Mirror 04:12:35 INFO] rotating to position Y
[Status 04:12:36 INFO] .SET file for ACQ96 ready
[Ingest 04:12:36 INFO] Starting acquisition
[Status 04:12:36 INFO] reading housekeeping
[Status 04:12:54 INFO] acquire complete
[Status 04:12:54 INFO] writing housekeeping
[Sequencer 04:12:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:12:54 INFO] incremented Y scene to 78 completed views
[Sequencer 04:12:54 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:12:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:12:54 INFO] incremented to [AERI set: name Z78, 6 scans, 0 angle, D16300 command] set
[sigmove 04:12:54 INFO] Y78.SIG(18)
[sigmove 04:12:54 DEBUG] transformed Y78Ma.SPC -> Y78MA.SPC
[sigmove 04:12:54 DEBUG] transformed Y78Mb.SPC -> Y78MB.SPC
[sigmove 04:12:54 DEBUG] transformed Y78Mc.SPC -> Y78MC.SPC
[sigmove 04:12:54 DEBUG] transformed Y78Md.SPC -> Y78MD.SPC
[sigmove 04:12:54 DEBUG] transformed Y78Me.SPC -> Y78ME.SPC
[sigmove 04:12:54 DEBUG] transformed Y78Mf.SPC -> Y78MF.SPC
[Status 04:12:54 INFO] data for Y78 transferred to science data processing
[Tidy 04:12:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:12:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:12:54 INFO] resetting WatchDogTimer
[Status 04:12:54 INFO] Starting Set [AERI set: name Z78, 6 scans, 0 angle, D16300 command]
[Ingest 04:12:54 INFO] Sending XML status message
[Status 04:12:54 INFO] Mirror angle: 0
[Mirror 04:12:54 INFO] rotating to position Z
[Status 04:12:55 INFO] .SET file for ACQ96 ready
[Ingest 04:12:55 INFO] Starting acquisition
[Status 04:12:55 INFO] reading housekeeping
[Status 04:13:13 INFO] acquire complete
[Status 04:13:13 INFO] writing housekeeping
[Sequencer 04:13:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:13:13 INFO] incremented Z scene to 78 completed views
[Sequencer 04:13:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:13:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:13:13 INFO] incremented to [AERI set: name H79, 6 scans, 60 angle, D22500 command] set
[sigmove 04:13:13 INFO] Z78.SIG(18)
[sigmove 04:13:13 DEBUG] transformed Z78Ma.SPC -> Z78MA.SPC
[sigmove 04:13:13 DEBUG] transformed Z78Mb.SPC -> Z78MB.SPC
[sigmove 04:13:13 DEBUG] transformed Z78Mc.SPC -> Z78MC.SPC
[sigmove 04:13:13 DEBUG] transformed Z78Md.SPC -> Z78MD.SPC
[sigmove 04:13:13 DEBUG] transformed Z78Me.SPC -> Z78ME.SPC
[sigmove 04:13:13 DEBUG] transformed Z78Mf.SPC -> Z78MF.SPC
[Status 04:13:13 INFO] data for Z78 transferred to science data processing
[Tidy 04:13:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:13:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:13:13 INFO] resetting WatchDogTimer
[Status 04:13:13 INFO] Starting Set [AERI set: name H79, 6 scans, 60 angle, D22500 command]
[Ingest 04:13:13 INFO] Sending XML status message
[Status 04:13:13 INFO] Mirror angle: 60
[Mirror 04:13:13 INFO] rotating to position H
[Status 04:13:14 INFO] .SET file for ACQ96 ready
[Ingest 04:13:14 INFO] Starting acquisition
[Status 04:13:15 INFO] reading housekeeping
[Status 04:13:33 INFO] acquire complete
[Status 04:13:35 INFO] writing housekeeping
[Sequencer 04:13:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:13:35 INFO] incremented H scene to 79 completed views
[Sequencer 04:13:35 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:13:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:13:35 INFO] incremented to [AERI set: name A79, 6 scans, 120 angle, D28300 command] set
[sigmove 04:13:35 INFO] H79.SIG(18)
[sigmove 04:13:35 DEBUG] transformed H79Ma.SPC -> H79MA.SPC
[sigmove 04:13:35 DEBUG] transformed H79Mb.SPC -> H79MB.SPC
[sigmove 04:13:35 DEBUG] transformed H79Mc.SPC -> H79MC.SPC
[sigmove 04:13:35 DEBUG] transformed H79Md.SPC -> H79MD.SPC
[sigmove 04:13:35 DEBUG] transformed H79Me.SPC -> H79ME.SPC
[sigmove 04:13:35 DEBUG] transformed H79Mf.SPC -> H79MF.SPC
[Status 04:13:35 INFO] data for H79 transferred to science data processing
[Tidy 04:13:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:13:35 INFO] A77.FIN(19),H77.FIN(19),S77.FIN(19),T77.FIN(19),U77.FIN(19),V77.FIN(19),W77.FIN(19),X77.FIN(19),Y77.FIN(19),Z77.FIN(19),A78.FIN(19),H78.FIN(19),S78.FIN(19),T78.FIN(19),U78.FIN(19),V78.FIN(19),W78.FIN(19),X78.FIN(19),Y78.FIN(19),Z78.FIN(19)
[sigmove 04:13:35 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:13:35 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:13:36 DEBUG] done zipping
[WatchDog 04:13:36 INFO] resetting WatchDogTimer
[Status 04:13:36 INFO] Starting Set [AERI set: name A79, 6 scans, 120 angle, D28300 command]
[Ingest 04:13:36 INFO] Sending XML status message
[Status 04:13:36 INFO] Mirror angle: 120
[Mirror 04:13:37 INFO] rotating to position A
[Status 04:13:37 INFO] .SET file for ACQ96 ready
[Ingest 04:13:37 INFO] Starting acquisition
[Status 04:13:38 INFO] reading housekeeping
[Status 04:13:55 INFO] acquire complete
[Status 04:13:56 INFO] writing housekeeping
[Sequencer 04:13:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:13:56 INFO] incremented A scene to 79 completed views
[Sequencer 04:13:56 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:13:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:13:56 INFO] incremented to [AERI set: name S79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:13:56 INFO] A79.SIG(18)
[sigmove 04:13:56 DEBUG] transformed A79Ma.SPC -> A79MA.SPC
[sigmove 04:13:56 DEBUG] transformed A79Mb.SPC -> A79MB.SPC
[sigmove 04:13:56 DEBUG] transformed A79Mc.SPC -> A79MC.SPC
[sigmove 04:13:56 DEBUG] transformed A79Md.SPC -> A79MD.SPC
[sigmove 04:13:56 DEBUG] transformed A79Me.SPC -> A79ME.SPC
[sigmove 04:13:56 DEBUG] transformed A79Mf.SPC -> A79MF.SPC
[Status 04:13:56 INFO] data for A79 transferred to science data processing
[Tidy 04:13:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:13:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:13:56 INFO] resetting WatchDogTimer
[Status 04:13:56 INFO] Starting Set [AERI set: name S79, 6 scans, 0 angle, D16300 command]
[Ingest 04:13:56 INFO] Sending XML status message
[Status 04:13:56 INFO] Mirror angle: 0
[Mirror 04:13:56 INFO] rotating to position S
[Status 04:13:57 INFO] .SET file for ACQ96 ready
[Ingest 04:13:58 INFO] Starting acquisition
[Status 04:13:58 INFO] reading housekeeping
[Status 04:14:16 INFO] acquire complete
[Status 04:14:16 INFO] writing housekeeping
[Sequencer 04:14:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:14:16 INFO] incremented S scene to 79 completed views
[Sequencer 04:14:16 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:14:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:14:16 INFO] incremented to [AERI set: name T79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:14:16 INFO] S79.SIG(18)
[sigmove 04:14:16 DEBUG] transformed S79Ma.SPC -> S79MA.SPC
[sigmove 04:14:16 DEBUG] transformed S79Mb.SPC -> S79MB.SPC
[sigmove 04:14:16 DEBUG] transformed S79Mc.SPC -> S79MC.SPC
[sigmove 04:14:16 DEBUG] transformed S79Md.SPC -> S79MD.SPC
[sigmove 04:14:16 DEBUG] transformed S79Me.SPC -> S79ME.SPC
[sigmove 04:14:16 DEBUG] transformed S79Mf.SPC -> S79MF.SPC
[Status 04:14:16 INFO] data for S79 transferred to science data processing
[Tidy 04:14:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:14:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:14:16 INFO] resetting WatchDogTimer
[Status 04:14:16 INFO] Starting Set [AERI set: name T79, 6 scans, 0 angle, D16300 command]
[Ingest 04:14:16 INFO] Sending XML status message
[Status 04:14:16 INFO] Mirror angle: 0
[Mirror 04:14:16 INFO] rotating to position T
[Status 04:14:17 INFO] .SET file for ACQ96 ready
[Ingest 04:14:17 INFO] Starting acquisition
[Status 04:14:17 INFO] reading housekeeping
[Status 04:14:35 INFO] acquire complete
[Status 04:14:35 INFO] writing housekeeping
[Sequencer 04:14:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:14:35 INFO] incremented T scene to 79 completed views
[Sequencer 04:14:35 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:14:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:14:35 INFO] incremented to [AERI set: name U79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:14:35 INFO] T79.SIG(18)
[sigmove 04:14:35 DEBUG] transformed T79Ma.SPC -> T79MA.SPC
[sigmove 04:14:35 DEBUG] transformed T79Mb.SPC -> T79MB.SPC
[sigmove 04:14:35 DEBUG] transformed T79Mc.SPC -> T79MC.SPC
[sigmove 04:14:35 DEBUG] transformed T79Md.SPC -> T79MD.SPC
[sigmove 04:14:35 DEBUG] transformed T79Me.SPC -> T79ME.SPC
[sigmove 04:14:35 DEBUG] transformed T79Mf.SPC -> T79MF.SPC
[Status 04:14:35 INFO] data for T79 transferred to science data processing
[Tidy 04:14:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:14:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:14:35 INFO] resetting WatchDogTimer
[Status 04:14:35 INFO] Starting Set [AERI set: name U79, 6 scans, 0 angle, D16300 command]
[Ingest 04:14:35 INFO] Sending XML status message
[Status 04:14:35 INFO] Mirror angle: 0
[Mirror 04:14:35 INFO] rotating to position U
[Status 04:14:36 INFO] .SET file for ACQ96 ready
[Ingest 04:14:36 INFO] Starting acquisition
[Status 04:14:36 INFO] reading housekeeping
[Status 04:14:54 INFO] acquire complete
[Status 04:14:54 INFO] writing housekeeping
[Sequencer 04:14:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:14:54 INFO] incremented U scene to 79 completed views
[Sequencer 04:14:54 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:14:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:14:54 INFO] incremented to [AERI set: name V79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:14:54 INFO] U79.SIG(18)
[sigmove 04:14:54 DEBUG] transformed U79Ma.SPC -> U79MA.SPC
[sigmove 04:14:54 DEBUG] transformed U79Mb.SPC -> U79MB.SPC
[sigmove 04:14:54 DEBUG] transformed U79Mc.SPC -> U79MC.SPC
[sigmove 04:14:54 DEBUG] transformed U79Md.SPC -> U79MD.SPC
[sigmove 04:14:54 DEBUG] transformed U79Me.SPC -> U79ME.SPC
[sigmove 04:14:54 DEBUG] transformed U79Mf.SPC -> U79MF.SPC
[Status 04:14:54 INFO] data for U79 transferred to science data processing
[Tidy 04:14:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:14:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:14:54 INFO] resetting WatchDogTimer
[Status 04:14:54 INFO] Starting Set [AERI set: name V79, 6 scans, 0 angle, D16300 command]
[Ingest 04:14:54 INFO] Sending XML status message
[Status 04:14:54 INFO] Mirror angle: 0
[Mirror 04:14:55 INFO] rotating to position V
[Status 04:14:55 INFO] .SET file for ACQ96 ready
[Ingest 04:14:55 INFO] Starting acquisition
[Status 04:14:55 INFO] reading housekeeping
[Status 04:15:13 INFO] acquire complete
[Status 04:15:13 INFO] writing housekeeping
[Sequencer 04:15:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:15:13 INFO] incremented V scene to 79 completed views
[Sequencer 04:15:13 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:15:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:15:13 INFO] incremented to [AERI set: name W79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:15:13 INFO] V79.SIG(18)
[sigmove 04:15:13 DEBUG] transformed V79Ma.SPC -> V79MA.SPC
[sigmove 04:15:13 DEBUG] transformed V79Mb.SPC -> V79MB.SPC
[sigmove 04:15:13 DEBUG] transformed V79Mc.SPC -> V79MC.SPC
[sigmove 04:15:13 DEBUG] transformed V79Md.SPC -> V79MD.SPC
[sigmove 04:15:13 DEBUG] transformed V79Me.SPC -> V79ME.SPC
[sigmove 04:15:13 DEBUG] transformed V79Mf.SPC -> V79MF.SPC
[Status 04:15:13 INFO] data for V79 transferred to science data processing
[Tidy 04:15:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:15:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:15:13 INFO] resetting WatchDogTimer
[Status 04:15:13 INFO] Starting Set [AERI set: name W79, 6 scans, 0 angle, D16300 command]
[Ingest 04:15:13 INFO] Sending XML status message
[Status 04:15:13 INFO] Mirror angle: 0
[Mirror 04:15:14 INFO] rotating to position W
[Status 04:15:14 INFO] .SET file for ACQ96 ready
[Ingest 04:15:14 INFO] Starting acquisition
[Status 04:15:14 INFO] reading housekeeping
[Status 04:15:32 INFO] acquire complete
[Status 04:15:32 INFO] writing housekeeping
[Sequencer 04:15:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:15:32 INFO] incremented W scene to 79 completed views
[Sequencer 04:15:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:15:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:15:32 INFO] incremented to [AERI set: name X79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:15:32 INFO] W79.SIG(18)
[sigmove 04:15:32 DEBUG] transformed W79Ma.SPC -> W79MA.SPC
[sigmove 04:15:32 DEBUG] transformed W79Mb.SPC -> W79MB.SPC
[sigmove 04:15:32 DEBUG] transformed W79Mc.SPC -> W79MC.SPC
[sigmove 04:15:32 DEBUG] transformed W79Md.SPC -> W79MD.SPC
[sigmove 04:15:32 DEBUG] transformed W79Me.SPC -> W79ME.SPC
[sigmove 04:15:32 DEBUG] transformed W79Mf.SPC -> W79MF.SPC
[Status 04:15:32 INFO] data for W79 transferred to science data processing
[Tidy 04:15:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:15:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:15:32 INFO] resetting WatchDogTimer
[Status 04:15:33 INFO] Starting Set [AERI set: name X79, 6 scans, 0 angle, D16300 command]
[Ingest 04:15:33 INFO] Sending XML status message
[Status 04:15:33 INFO] Mirror angle: 0
[Mirror 04:15:33 INFO] rotating to position X
[Status 04:15:33 INFO] .SET file for ACQ96 ready
[Ingest 04:15:33 INFO] Starting acquisition
[Status 04:15:33 INFO] reading housekeeping
[Status 04:15:51 INFO] acquire complete
[Status 04:15:51 INFO] writing housekeeping
[Sequencer 04:15:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:15:51 INFO] incremented X scene to 79 completed views
[Sequencer 04:15:51 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:15:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:15:51 INFO] incremented to [AERI set: name Y79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:15:51 INFO] X79.SIG(18)
[sigmove 04:15:51 DEBUG] transformed X79Ma.SPC -> X79MA.SPC
[sigmove 04:15:52 DEBUG] transformed X79Mb.SPC -> X79MB.SPC
[sigmove 04:15:52 DEBUG] transformed X79Mc.SPC -> X79MC.SPC
[sigmove 04:15:52 DEBUG] transformed X79Md.SPC -> X79MD.SPC
[sigmove 04:15:52 DEBUG] transformed X79Me.SPC -> X79ME.SPC
[sigmove 04:15:52 DEBUG] transformed X79Mf.SPC -> X79MF.SPC
[Status 04:15:52 INFO] data for X79 transferred to science data processing
[Tidy 04:15:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:15:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:15:52 INFO] resetting WatchDogTimer
[Status 04:15:52 INFO] Starting Set [AERI set: name Y79, 6 scans, 0 angle, D16300 command]
[Ingest 04:15:52 INFO] Sending XML status message
[Status 04:15:52 INFO] Mirror angle: 0
[Mirror 04:15:52 INFO] rotating to position Y
[Status 04:15:52 INFO] .SET file for ACQ96 ready
[Ingest 04:15:52 INFO] Starting acquisition
[Status 04:15:52 INFO] reading housekeeping
[Status 04:16:10 INFO] acquire complete
[Status 04:16:11 INFO] writing housekeeping
[Sequencer 04:16:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:16:11 INFO] incremented Y scene to 79 completed views
[Sequencer 04:16:11 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:16:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:16:11 INFO] incremented to [AERI set: name Z79, 6 scans, 0 angle, D16300 command] set
[sigmove 04:16:11 INFO] Y79.SIG(18)
[sigmove 04:16:11 DEBUG] transformed Y79Ma.SPC -> Y79MA.SPC
[sigmove 04:16:11 DEBUG] transformed Y79Mb.SPC -> Y79MB.SPC
[sigmove 04:16:11 DEBUG] transformed Y79Mc.SPC -> Y79MC.SPC
[sigmove 04:16:11 DEBUG] transformed Y79Md.SPC -> Y79MD.SPC
[sigmove 04:16:11 DEBUG] transformed Y79Me.SPC -> Y79ME.SPC
[sigmove 04:16:11 DEBUG] transformed Y79Mf.SPC -> Y79MF.SPC
[Status 04:16:11 INFO] data for Y79 transferred to science data processing
[Tidy 04:16:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:16:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:16:11 INFO] resetting WatchDogTimer
[Status 04:16:11 INFO] Starting Set [AERI set: name Z79, 6 scans, 0 angle, D16300 command]
[Ingest 04:16:11 INFO] Sending XML status message
[Status 04:16:11 INFO] Mirror angle: 0
[Mirror 04:16:11 INFO] rotating to position Z
[Status 04:16:11 INFO] .SET file for ACQ96 ready
[Ingest 04:16:11 INFO] Starting acquisition
[Status 04:16:11 INFO] reading housekeeping
[Status 04:16:29 INFO] acquire complete
[Status 04:16:30 INFO] writing housekeeping
[Sequencer 04:16:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:16:30 INFO] incremented Z scene to 79 completed views
[Sequencer 04:16:30 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:16:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:16:30 INFO] incremented to [AERI set: name A80, 6 scans, 120 angle, D28300 command] set
[sigmove 04:16:30 INFO] Z79.SIG(18)
[sigmove 04:16:30 DEBUG] transformed Z79Ma.SPC -> Z79MA.SPC
[sigmove 04:16:30 DEBUG] transformed Z79Mb.SPC -> Z79MB.SPC
[sigmove 04:16:30 DEBUG] transformed Z79Mc.SPC -> Z79MC.SPC
[sigmove 04:16:30 DEBUG] transformed Z79Md.SPC -> Z79MD.SPC
[sigmove 04:16:30 DEBUG] transformed Z79Me.SPC -> Z79ME.SPC
[sigmove 04:16:30 DEBUG] transformed Z79Mf.SPC -> Z79MF.SPC
[Status 04:16:30 INFO] data for Z79 transferred to science data processing
[Tidy 04:16:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:16:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:16:30 INFO] resetting WatchDogTimer
[Status 04:16:30 INFO] Starting Set [AERI set: name A80, 6 scans, 120 angle, D28300 command]
[Ingest 04:16:30 INFO] Sending XML status message
[Status 04:16:30 INFO] Mirror angle: 120
[Mirror 04:16:30 INFO] rotating to position A
[Status 04:16:31 INFO] .SET file for ACQ96 ready
[Ingest 04:16:31 INFO] Starting acquisition
[Status 04:16:31 INFO] reading housekeeping
[Status 04:16:49 INFO] acquire complete
[Status 04:16:50 INFO] writing housekeeping
[Sequencer 04:16:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:16:50 INFO] incremented A scene to 80 completed views
[Sequencer 04:16:50 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:16:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:16:50 INFO] incremented to [AERI set: name H80, 6 scans, 60 angle, D22500 command] set
[sigmove 04:16:50 INFO] A80.SIG(18)
[sigmove 04:16:50 DEBUG] transformed A80Ma.SPC -> A80MA.SPC
[sigmove 04:16:50 DEBUG] transformed A80Mb.SPC -> A80MB.SPC
[sigmove 04:16:50 DEBUG] transformed A80Mc.SPC -> A80MC.SPC
[sigmove 04:16:50 DEBUG] transformed A80Md.SPC -> A80MD.SPC
[sigmove 04:16:50 DEBUG] transformed A80Me.SPC -> A80ME.SPC
[sigmove 04:16:50 DEBUG] transformed A80Mf.SPC -> A80MF.SPC
[Status 04:16:50 INFO] data for A80 transferred to science data processing
[Tidy 04:16:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:16:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:16:50 INFO] resetting WatchDogTimer
[Status 04:16:50 INFO] Starting Set [AERI set: name H80, 6 scans, 60 angle, D22500 command]
[Ingest 04:16:50 INFO] Sending XML status message
[Status 04:16:50 INFO] Mirror angle: 60
[Mirror 04:16:50 INFO] rotating to position H
[Status 04:16:51 INFO] .SET file for ACQ96 ready
[Ingest 04:16:51 INFO] Starting acquisition
[Status 04:16:51 INFO] reading housekeeping
[Status 04:17:09 INFO] acquire complete
[Status 04:17:09 INFO] writing housekeeping
[Sequencer 04:17:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:17:09 INFO] incremented H scene to 80 completed views
[Sequencer 04:17:09 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:17:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:17:09 INFO] incremented to [AERI set: name S80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:17:09 INFO] H80.SIG(18)
[sigmove 04:17:09 DEBUG] transformed H80Ma.SPC -> H80MA.SPC
[sigmove 04:17:09 DEBUG] transformed H80Mb.SPC -> H80MB.SPC
[sigmove 04:17:09 DEBUG] transformed H80Mc.SPC -> H80MC.SPC
[sigmove 04:17:09 DEBUG] transformed H80Md.SPC -> H80MD.SPC
[sigmove 04:17:09 DEBUG] transformed H80Me.SPC -> H80ME.SPC
[sigmove 04:17:09 DEBUG] transformed H80Mf.SPC -> H80MF.SPC
[Status 04:17:09 INFO] data for H80 transferred to science data processing
[Tidy 04:17:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:17:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:17:09 INFO] resetting WatchDogTimer
[Status 04:17:09 INFO] Starting Set [AERI set: name S80, 6 scans, 0 angle, D16300 command]
[Ingest 04:17:09 INFO] Sending XML status message
[Status 04:17:09 INFO] Mirror angle: 0
[Mirror 04:17:09 INFO] rotating to position S
[Status 04:17:10 INFO] .SET file for ACQ96 ready
[Ingest 04:17:10 INFO] Starting acquisition
[Status 04:17:10 INFO] reading housekeeping
[Status 04:17:28 INFO] acquire complete
[Status 04:17:28 INFO] writing housekeeping
[Sequencer 04:17:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:17:28 INFO] incremented S scene to 80 completed views
[Sequencer 04:17:28 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:17:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:17:28 INFO] incremented to [AERI set: name T80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:17:28 INFO] S80.SIG(18)
[sigmove 04:17:28 DEBUG] transformed S80Ma.SPC -> S80MA.SPC
[sigmove 04:17:28 DEBUG] transformed S80Mb.SPC -> S80MB.SPC
[sigmove 04:17:28 DEBUG] transformed S80Mc.SPC -> S80MC.SPC
[sigmove 04:17:28 DEBUG] transformed S80Md.SPC -> S80MD.SPC
[sigmove 04:17:28 DEBUG] transformed S80Me.SPC -> S80ME.SPC
[sigmove 04:17:28 DEBUG] transformed S80Mf.SPC -> S80MF.SPC
[Status 04:17:28 INFO] data for S80 transferred to science data processing
[Tidy 04:17:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:17:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:17:28 INFO] resetting WatchDogTimer
[Status 04:17:28 INFO] Starting Set [AERI set: name T80, 6 scans, 0 angle, D16300 command]
[Ingest 04:17:28 INFO] Sending XML status message
[Status 04:17:28 INFO] Mirror angle: 0
[Mirror 04:17:28 INFO] rotating to position T
[Status 04:17:29 INFO] .SET file for ACQ96 ready
[Ingest 04:17:29 INFO] Starting acquisition
[Status 04:17:29 INFO] reading housekeeping
[Status 04:17:47 INFO] acquire complete
[Status 04:17:47 INFO] writing housekeeping
[Sequencer 04:17:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:17:47 INFO] incremented T scene to 80 completed views
[Sequencer 04:17:47 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:17:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:17:47 INFO] incremented to [AERI set: name U80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:17:47 INFO] T80.SIG(18)
[sigmove 04:17:47 DEBUG] transformed T80Ma.SPC -> T80MA.SPC
[sigmove 04:17:47 DEBUG] transformed T80Mb.SPC -> T80MB.SPC
[sigmove 04:17:47 DEBUG] transformed T80Mc.SPC -> T80MC.SPC
[sigmove 04:17:47 DEBUG] transformed T80Md.SPC -> T80MD.SPC
[sigmove 04:17:47 DEBUG] transformed T80Me.SPC -> T80ME.SPC
[sigmove 04:17:47 DEBUG] transformed T80Mf.SPC -> T80MF.SPC
[Status 04:17:47 INFO] data for T80 transferred to science data processing
[Tidy 04:17:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:17:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:17:47 INFO] resetting WatchDogTimer
[Status 04:17:47 INFO] Starting Set [AERI set: name U80, 6 scans, 0 angle, D16300 command]
[Ingest 04:17:47 INFO] Sending XML status message
[Status 04:17:47 INFO] Mirror angle: 0
[Mirror 04:17:47 INFO] rotating to position U
[Status 04:17:48 INFO] .SET file for ACQ96 ready
[Ingest 04:17:48 INFO] Starting acquisition
[Status 04:17:48 INFO] reading housekeeping
[Status 04:18:06 INFO] acquire complete
[Status 04:18:07 INFO] writing housekeeping
[Sequencer 04:18:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:18:07 INFO] incremented U scene to 80 completed views
[Sequencer 04:18:07 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:18:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:18:07 INFO] incremented to [AERI set: name V80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:18:07 INFO] U80.SIG(18)
[sigmove 04:18:07 DEBUG] transformed U80Ma.SPC -> U80MA.SPC
[sigmove 04:18:07 DEBUG] transformed U80Mb.SPC -> U80MB.SPC
[sigmove 04:18:07 DEBUG] transformed U80Mc.SPC -> U80MC.SPC
[sigmove 04:18:07 DEBUG] transformed U80Md.SPC -> U80MD.SPC
[sigmove 04:18:07 DEBUG] transformed U80Me.SPC -> U80ME.SPC
[sigmove 04:18:07 DEBUG] transformed U80Mf.SPC -> U80MF.SPC
[Status 04:18:07 INFO] data for U80 transferred to science data processing
[Tidy 04:18:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:18:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:18:07 INFO] resetting WatchDogTimer
[Status 04:18:07 INFO] Starting Set [AERI set: name V80, 6 scans, 0 angle, D16300 command]
[Ingest 04:18:07 INFO] Sending XML status message
[Status 04:18:07 INFO] Mirror angle: 0
[Mirror 04:18:08 INFO] rotating to position V
[Status 04:18:08 INFO] .SET file for ACQ96 ready
[Ingest 04:18:08 INFO] Starting acquisition
[Status 04:18:08 INFO] reading housekeeping
[Status 04:18:26 INFO] acquire complete
[Status 04:18:26 INFO] writing housekeeping
[Sequencer 04:18:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:18:26 INFO] incremented V scene to 80 completed views
[Sequencer 04:18:26 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:18:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:18:26 INFO] incremented to [AERI set: name W80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:18:26 INFO] V80.SIG(18)
[sigmove 04:18:26 DEBUG] transformed V80Ma.SPC -> V80MA.SPC
[sigmove 04:18:26 DEBUG] transformed V80Mb.SPC -> V80MB.SPC
[sigmove 04:18:26 DEBUG] transformed V80Mc.SPC -> V80MC.SPC
[sigmove 04:18:26 DEBUG] transformed V80Md.SPC -> V80MD.SPC
[sigmove 04:18:26 DEBUG] transformed V80Me.SPC -> V80ME.SPC
[sigmove 04:18:26 DEBUG] transformed V80Mf.SPC -> V80MF.SPC
[Status 04:18:26 INFO] data for V80 transferred to science data processing
[Tidy 04:18:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:18:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:18:26 INFO] resetting WatchDogTimer
[Status 04:18:27 INFO] Starting Set [AERI set: name W80, 6 scans, 0 angle, D16300 command]
[Ingest 04:18:27 INFO] Sending XML status message
[Status 04:18:27 INFO] Mirror angle: 0
[Mirror 04:18:27 INFO] rotating to position W
[Status 04:18:27 INFO] .SET file for ACQ96 ready
[Ingest 04:18:27 INFO] Starting acquisition
[Status 04:18:27 INFO] reading housekeeping
[Status 04:18:45 INFO] acquire complete
[Status 04:18:46 INFO] writing housekeeping
[Sequencer 04:18:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:18:46 INFO] incremented W scene to 80 completed views
[Sequencer 04:18:46 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:18:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:18:46 INFO] incremented to [AERI set: name X80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:18:46 INFO] W80.SIG(18)
[sigmove 04:18:46 DEBUG] transformed W80Ma.SPC -> W80MA.SPC
[sigmove 04:18:46 DEBUG] transformed W80Mb.SPC -> W80MB.SPC
[sigmove 04:18:46 DEBUG] transformed W80Mc.SPC -> W80MC.SPC
[sigmove 04:18:46 DEBUG] transformed W80Md.SPC -> W80MD.SPC
[sigmove 04:18:46 DEBUG] transformed W80Me.SPC -> W80ME.SPC
[sigmove 04:18:46 DEBUG] transformed W80Mf.SPC -> W80MF.SPC
[Status 04:18:46 INFO] data for W80 transferred to science data processing
[Tidy 04:18:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:18:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:18:46 INFO] resetting WatchDogTimer
[Status 04:18:46 INFO] Starting Set [AERI set: name X80, 6 scans, 0 angle, D16300 command]
[Ingest 04:18:46 INFO] Sending XML status message
[Status 04:18:46 INFO] Mirror angle: 0
[Mirror 04:18:46 INFO] rotating to position X
[Status 04:18:46 INFO] .SET file for ACQ96 ready
[Ingest 04:18:46 INFO] Starting acquisition
[Status 04:18:46 INFO] reading housekeeping
[Status 04:19:04 INFO] acquire complete
[Status 04:19:05 INFO] writing housekeeping
[Sequencer 04:19:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:19:05 INFO] incremented X scene to 80 completed views
[Sequencer 04:19:05 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:19:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:19:05 INFO] incremented to [AERI set: name Y80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:19:05 INFO] X80.SIG(18)
[sigmove 04:19:05 DEBUG] transformed X80Ma.SPC -> X80MA.SPC
[sigmove 04:19:05 DEBUG] transformed X80Mb.SPC -> X80MB.SPC
[sigmove 04:19:05 DEBUG] transformed X80Mc.SPC -> X80MC.SPC
[sigmove 04:19:05 DEBUG] transformed X80Md.SPC -> X80MD.SPC
[sigmove 04:19:05 DEBUG] transformed X80Me.SPC -> X80ME.SPC
[sigmove 04:19:05 DEBUG] transformed X80Mf.SPC -> X80MF.SPC
[Status 04:19:05 INFO] data for X80 transferred to science data processing
[Tidy 04:19:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:19:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:19:05 INFO] resetting WatchDogTimer
[Status 04:19:05 INFO] Starting Set [AERI set: name Y80, 6 scans, 0 angle, D16300 command]
[Ingest 04:19:05 INFO] Sending XML status message
[Status 04:19:05 INFO] Mirror angle: 0
[Mirror 04:19:05 INFO] rotating to position Y
[Status 04:19:05 INFO] .SET file for ACQ96 ready
[Ingest 04:19:05 INFO] Starting acquisition
[Status 04:19:05 INFO] reading housekeeping
[Status 04:19:23 INFO] acquire complete
[Status 04:19:24 INFO] writing housekeeping
[Sequencer 04:19:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:19:24 INFO] incremented Y scene to 80 completed views
[Sequencer 04:19:24 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:19:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:19:24 INFO] incremented to [AERI set: name Z80, 6 scans, 0 angle, D16300 command] set
[sigmove 04:19:24 INFO] Y80.SIG(18)
[sigmove 04:19:24 DEBUG] transformed Y80Ma.SPC -> Y80MA.SPC
[sigmove 04:19:24 DEBUG] transformed Y80Mb.SPC -> Y80MB.SPC
[sigmove 04:19:24 DEBUG] transformed Y80Mc.SPC -> Y80MC.SPC
[sigmove 04:19:24 DEBUG] transformed Y80Md.SPC -> Y80MD.SPC
[sigmove 04:19:24 DEBUG] transformed Y80Me.SPC -> Y80ME.SPC
[sigmove 04:19:24 DEBUG] transformed Y80Mf.SPC -> Y80MF.SPC
[Status 04:19:24 INFO] data for Y80 transferred to science data processing
[Tidy 04:19:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:19:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:19:24 INFO] resetting WatchDogTimer
[Status 04:19:24 INFO] Starting Set [AERI set: name Z80, 6 scans, 0 angle, D16300 command]
[Ingest 04:19:24 INFO] Sending XML status message
[Status 04:19:24 INFO] Mirror angle: 0
[Mirror 04:19:24 INFO] rotating to position Z
[Status 04:19:24 INFO] .SET file for ACQ96 ready
[Ingest 04:19:24 INFO] Starting acquisition
[Status 04:19:24 INFO] reading housekeeping
[Status 04:19:42 INFO] acquire complete
[Status 04:19:43 INFO] writing housekeeping
[Sequencer 04:19:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:19:43 INFO] incremented Z scene to 80 completed views
[Sequencer 04:19:43 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:19:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:19:43 INFO] incremented to [AERI set: name H81, 6 scans, 60 angle, D22500 command] set
[sigmove 04:19:43 INFO] Z80.SIG(18)
[sigmove 04:19:43 DEBUG] transformed Z80Ma.SPC -> Z80MA.SPC
[sigmove 04:19:43 DEBUG] transformed Z80Mb.SPC -> Z80MB.SPC
[sigmove 04:19:43 DEBUG] transformed Z80Mc.SPC -> Z80MC.SPC
[sigmove 04:19:43 DEBUG] transformed Z80Md.SPC -> Z80MD.SPC
[sigmove 04:19:43 DEBUG] transformed Z80Me.SPC -> Z80ME.SPC
[sigmove 04:19:43 DEBUG] transformed Z80Mf.SPC -> Z80MF.SPC
[Status 04:19:43 INFO] data for Z80 transferred to science data processing
[Tidy 04:19:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:19:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:19:43 INFO] resetting WatchDogTimer
[Status 04:19:43 INFO] Starting Set [AERI set: name H81, 6 scans, 60 angle, D22500 command]
[Ingest 04:19:43 INFO] Sending XML status message
[Status 04:19:43 INFO] Mirror angle: 60
[Mirror 04:19:43 INFO] rotating to position H
[Status 04:19:44 INFO] .SET file for ACQ96 ready
[Ingest 04:19:44 INFO] Starting acquisition
[Status 04:19:44 INFO] reading housekeeping
[Status 04:20:01 INFO] acquire complete
[Status 04:20:02 INFO] writing housekeeping
[Sequencer 04:20:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:20:02 INFO] incremented H scene to 81 completed views
[Sequencer 04:20:02 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:20:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:20:02 INFO] incremented to [AERI set: name A81, 6 scans, 120 angle, D28300 command] set
[sigmove 04:20:02 INFO] H81.SIG(18)
[sigmove 04:20:02 DEBUG] transformed H81Ma.SPC -> H81MA.SPC
[sigmove 04:20:02 DEBUG] transformed H81Mb.SPC -> H81MB.SPC
[sigmove 04:20:02 DEBUG] transformed H81Mc.SPC -> H81MC.SPC
[sigmove 04:20:02 DEBUG] transformed H81Md.SPC -> H81MD.SPC
[sigmove 04:20:02 DEBUG] transformed H81Me.SPC -> H81ME.SPC
[sigmove 04:20:02 DEBUG] transformed H81Mf.SPC -> H81MF.SPC
[Status 04:20:02 INFO] data for H81 transferred to science data processing
[Tidy 04:20:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:20:02 INFO] A79.FIN(19),H79.FIN(19),S79.FIN(19),T79.FIN(19),U79.FIN(19),V79.FIN(19),W79.FIN(19),X79.FIN(19),Y79.FIN(19),Z79.FIN(19),A80.FIN(19),H80.FIN(19),S80.FIN(19),T80.FIN(19),U80.FIN(19),V80.FIN(19),W80.FIN(19),X80.FIN(19),Y80.FIN(19),Z80.FIN(19)
[sigmove 04:20:02 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:20:02 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:20:04 DEBUG] done zipping
[WatchDog 04:20:04 INFO] resetting WatchDogTimer
[Status 04:20:04 INFO] Starting Set [AERI set: name A81, 6 scans, 120 angle, D28300 command]
[Ingest 04:20:04 INFO] Sending XML status message
[Status 04:20:04 INFO] Mirror angle: 120
[Mirror 04:20:04 INFO] rotating to position A
[Status 04:20:05 INFO] .SET file for ACQ96 ready
[Ingest 04:20:05 INFO] Starting acquisition
[Status 04:20:05 INFO] reading housekeeping
[Status 04:20:23 INFO] acquire complete
[Status 04:20:23 INFO] writing housekeeping
[Sequencer 04:20:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:20:23 INFO] incremented A scene to 81 completed views
[Sequencer 04:20:23 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:20:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:20:23 INFO] incremented to [AERI set: name S81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:20:23 INFO] A81.SIG(18)
[sigmove 04:20:23 DEBUG] transformed A81Ma.SPC -> A81MA.SPC
[sigmove 04:20:23 DEBUG] transformed A81Mb.SPC -> A81MB.SPC
[sigmove 04:20:23 DEBUG] transformed A81Mc.SPC -> A81MC.SPC
[sigmove 04:20:23 DEBUG] transformed A81Md.SPC -> A81MD.SPC
[sigmove 04:20:23 DEBUG] transformed A81Me.SPC -> A81ME.SPC
[sigmove 04:20:23 DEBUG] transformed A81Mf.SPC -> A81MF.SPC
[Status 04:20:23 INFO] data for A81 transferred to science data processing
[Tidy 04:20:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:20:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:20:23 INFO] resetting WatchDogTimer
[Status 04:20:23 INFO] Starting Set [AERI set: name S81, 6 scans, 0 angle, D16300 command]
[Ingest 04:20:23 INFO] Sending XML status message
[Status 04:20:23 INFO] Mirror angle: 0
[Mirror 04:20:23 INFO] rotating to position S
[Status 04:20:25 INFO] .SET file for ACQ96 ready
[Ingest 04:20:25 INFO] Starting acquisition
[Status 04:20:25 INFO] reading housekeeping
[Status 04:20:43 INFO] acquire complete
[Status 04:20:44 INFO] writing housekeeping
[Sequencer 04:20:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:20:44 INFO] incremented S scene to 81 completed views
[Sequencer 04:20:44 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:20:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:20:44 INFO] incremented to [AERI set: name T81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:20:44 INFO] S81.SIG(18)
[sigmove 04:20:44 DEBUG] transformed S81Ma.SPC -> S81MA.SPC
[sigmove 04:20:44 DEBUG] transformed S81Mb.SPC -> S81MB.SPC
[sigmove 04:20:44 DEBUG] transformed S81Mc.SPC -> S81MC.SPC
[sigmove 04:20:44 DEBUG] transformed S81Md.SPC -> S81MD.SPC
[sigmove 04:20:44 DEBUG] transformed S81Me.SPC -> S81ME.SPC
[sigmove 04:20:44 DEBUG] transformed S81Mf.SPC -> S81MF.SPC
[Status 04:20:44 INFO] data for S81 transferred to science data processing
[Tidy 04:20:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:20:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:20:44 INFO] resetting WatchDogTimer
[Status 04:20:44 INFO] Starting Set [AERI set: name T81, 6 scans, 0 angle, D16300 command]
[Ingest 04:20:44 INFO] Sending XML status message
[Status 04:20:44 INFO] Mirror angle: 0
[Mirror 04:20:44 INFO] rotating to position T
[Status 04:20:44 INFO] .SET file for ACQ96 ready
[Ingest 04:20:44 INFO] Starting acquisition
[Status 04:20:44 INFO] reading housekeeping
[Status 04:21:02 INFO] acquire complete
[Status 04:21:02 INFO] writing housekeeping
[Sequencer 04:21:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:21:02 INFO] incremented T scene to 81 completed views
[Sequencer 04:21:02 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:21:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:21:02 INFO] incremented to [AERI set: name U81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:21:03 INFO] T81.SIG(18)
[sigmove 04:21:03 DEBUG] transformed T81Ma.SPC -> T81MA.SPC
[sigmove 04:21:03 DEBUG] transformed T81Mb.SPC -> T81MB.SPC
[sigmove 04:21:03 DEBUG] transformed T81Mc.SPC -> T81MC.SPC
[sigmove 04:21:03 DEBUG] transformed T81Md.SPC -> T81MD.SPC
[sigmove 04:21:03 DEBUG] transformed T81Me.SPC -> T81ME.SPC
[sigmove 04:21:03 DEBUG] transformed T81Mf.SPC -> T81MF.SPC
[Status 04:21:03 INFO] data for T81 transferred to science data processing
[Tidy 04:21:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:21:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:21:03 INFO] resetting WatchDogTimer
[Status 04:21:03 INFO] Starting Set [AERI set: name U81, 6 scans, 0 angle, D16300 command]
[Ingest 04:21:03 INFO] Sending XML status message
[Status 04:21:03 INFO] Mirror angle: 0
[Mirror 04:21:03 INFO] rotating to position U
[Status 04:21:03 INFO] .SET file for ACQ96 ready
[Ingest 04:21:03 INFO] Starting acquisition
[Status 04:21:03 INFO] reading housekeeping
[Status 04:21:21 INFO] acquire complete
[Status 04:21:22 INFO] writing housekeeping
[Sequencer 04:21:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:21:22 INFO] incremented U scene to 81 completed views
[Sequencer 04:21:22 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:21:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:21:22 INFO] incremented to [AERI set: name V81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:21:22 INFO] U81.SIG(18)
[sigmove 04:21:22 DEBUG] transformed U81Ma.SPC -> U81MA.SPC
[sigmove 04:21:22 DEBUG] transformed U81Mb.SPC -> U81MB.SPC
[sigmove 04:21:22 DEBUG] transformed U81Mc.SPC -> U81MC.SPC
[sigmove 04:21:22 DEBUG] transformed U81Md.SPC -> U81MD.SPC
[sigmove 04:21:22 DEBUG] transformed U81Me.SPC -> U81ME.SPC
[sigmove 04:21:22 DEBUG] transformed U81Mf.SPC -> U81MF.SPC
[Status 04:21:22 INFO] data for U81 transferred to science data processing
[Tidy 04:21:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:21:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:21:22 INFO] resetting WatchDogTimer
[Status 04:21:22 INFO] Starting Set [AERI set: name V81, 6 scans, 0 angle, D16300 command]
[Ingest 04:21:22 INFO] Sending XML status message
[Status 04:21:22 INFO] Mirror angle: 0
[Mirror 04:21:22 INFO] rotating to position V
[Status 04:21:22 INFO] .SET file for ACQ96 ready
[Ingest 04:21:22 INFO] Starting acquisition
[Status 04:21:22 INFO] reading housekeeping
[Status 04:21:40 INFO] acquire complete
[Status 04:21:41 INFO] writing housekeeping
[Sequencer 04:21:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:21:41 INFO] incremented V scene to 81 completed views
[Sequencer 04:21:41 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:21:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:21:41 INFO] incremented to [AERI set: name W81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:21:41 INFO] V81.SIG(18)
[sigmove 04:21:41 DEBUG] transformed V81Ma.SPC -> V81MA.SPC
[sigmove 04:21:41 DEBUG] transformed V81Mb.SPC -> V81MB.SPC
[sigmove 04:21:41 DEBUG] transformed V81Mc.SPC -> V81MC.SPC
[sigmove 04:21:41 DEBUG] transformed V81Md.SPC -> V81MD.SPC
[sigmove 04:21:41 DEBUG] transformed V81Me.SPC -> V81ME.SPC
[sigmove 04:21:41 DEBUG] transformed V81Mf.SPC -> V81MF.SPC
[Status 04:21:41 INFO] data for V81 transferred to science data processing
[Tidy 04:21:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:21:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:21:41 INFO] resetting WatchDogTimer
[Status 04:21:41 INFO] Starting Set [AERI set: name W81, 6 scans, 0 angle, D16300 command]
[Ingest 04:21:41 INFO] Sending XML status message
[Status 04:21:41 INFO] Mirror angle: 0
[Mirror 04:21:41 INFO] rotating to position W
[Status 04:21:41 INFO] .SET file for ACQ96 ready
[Ingest 04:21:41 INFO] Starting acquisition
[Status 04:21:41 INFO] reading housekeeping
[Status 04:21:59 INFO] acquire complete
[Status 04:22:00 INFO] writing housekeeping
[Sequencer 04:22:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:22:00 INFO] incremented W scene to 81 completed views
[Sequencer 04:22:00 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:22:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:22:00 INFO] incremented to [AERI set: name X81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:22:00 INFO] W81.SIG(18)
[sigmove 04:22:00 DEBUG] transformed W81Ma.SPC -> W81MA.SPC
[sigmove 04:22:00 DEBUG] transformed W81Mb.SPC -> W81MB.SPC
[sigmove 04:22:00 DEBUG] transformed W81Mc.SPC -> W81MC.SPC
[sigmove 04:22:00 DEBUG] transformed W81Md.SPC -> W81MD.SPC
[sigmove 04:22:00 DEBUG] transformed W81Me.SPC -> W81ME.SPC
[sigmove 04:22:00 DEBUG] transformed W81Mf.SPC -> W81MF.SPC
[Status 04:22:00 INFO] data for W81 transferred to science data processing
[Tidy 04:22:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:22:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:22:00 INFO] resetting WatchDogTimer
[Status 04:22:00 INFO] Starting Set [AERI set: name X81, 6 scans, 0 angle, D16300 command]
[Ingest 04:22:00 INFO] Sending XML status message
[Status 04:22:00 INFO] Mirror angle: 0
[Mirror 04:22:00 INFO] rotating to position X
[Status 04:22:00 INFO] .SET file for ACQ96 ready
[Ingest 04:22:00 INFO] Starting acquisition
[Status 04:22:01 INFO] reading housekeeping
[Status 04:22:18 INFO] acquire complete
[Status 04:22:19 INFO] writing housekeeping
[Sequencer 04:22:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:22:19 INFO] incremented X scene to 81 completed views
[Sequencer 04:22:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:22:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:22:19 INFO] incremented to [AERI set: name Y81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:22:19 INFO] X81.SIG(18)
[sigmove 04:22:19 DEBUG] transformed X81Ma.SPC -> X81MA.SPC
[sigmove 04:22:19 DEBUG] transformed X81Mb.SPC -> X81MB.SPC
[sigmove 04:22:19 DEBUG] transformed X81Mc.SPC -> X81MC.SPC
[sigmove 04:22:19 DEBUG] transformed X81Md.SPC -> X81MD.SPC
[sigmove 04:22:19 DEBUG] transformed X81Me.SPC -> X81ME.SPC
[sigmove 04:22:19 DEBUG] transformed X81Mf.SPC -> X81MF.SPC
[Status 04:22:19 INFO] data for X81 transferred to science data processing
[Tidy 04:22:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:22:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:22:19 INFO] resetting WatchDogTimer
[Status 04:22:19 INFO] Starting Set [AERI set: name Y81, 6 scans, 0 angle, D16300 command]
[Ingest 04:22:19 INFO] Sending XML status message
[Status 04:22:19 INFO] Mirror angle: 0
[Mirror 04:22:19 INFO] rotating to position Y
[Status 04:22:19 INFO] .SET file for ACQ96 ready
[Ingest 04:22:19 INFO] Starting acquisition
[Status 04:22:20 INFO] reading housekeeping
[Status 04:22:37 INFO] acquire complete
[Status 04:22:38 INFO] writing housekeeping
[Sequencer 04:22:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:22:38 INFO] incremented Y scene to 81 completed views
[Sequencer 04:22:38 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:22:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:22:38 INFO] incremented to [AERI set: name Z81, 6 scans, 0 angle, D16300 command] set
[sigmove 04:22:38 INFO] Y81.SIG(18)
[sigmove 04:22:38 DEBUG] transformed Y81Ma.SPC -> Y81MA.SPC
[sigmove 04:22:38 DEBUG] transformed Y81Mb.SPC -> Y81MB.SPC
[sigmove 04:22:38 DEBUG] transformed Y81Mc.SPC -> Y81MC.SPC
[sigmove 04:22:38 DEBUG] transformed Y81Md.SPC -> Y81MD.SPC
[sigmove 04:22:38 DEBUG] transformed Y81Me.SPC -> Y81ME.SPC
[sigmove 04:22:38 DEBUG] transformed Y81Mf.SPC -> Y81MF.SPC
[Status 04:22:38 INFO] data for Y81 transferred to science data processing
[Tidy 04:22:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:22:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:22:38 INFO] resetting WatchDogTimer
[Status 04:22:38 INFO] Starting Set [AERI set: name Z81, 6 scans, 0 angle, D16300 command]
[Ingest 04:22:38 INFO] Sending XML status message
[Status 04:22:38 INFO] Mirror angle: 0
[Mirror 04:22:38 INFO] rotating to position Z
[Status 04:22:38 INFO] .SET file for ACQ96 ready
[Ingest 04:22:39 INFO] Starting acquisition
[Status 04:22:39 INFO] reading housekeeping
[Status 04:22:57 INFO] acquire complete
[Status 04:22:57 INFO] writing housekeeping
[Sequencer 04:22:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:22:57 INFO] incremented Z scene to 81 completed views
[Sequencer 04:22:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:22:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:22:57 INFO] incremented to [AERI set: name A82, 6 scans, 120 angle, D28300 command] set
[sigmove 04:22:57 INFO] Z81.SIG(18)
[sigmove 04:22:57 DEBUG] transformed Z81Ma.SPC -> Z81MA.SPC
[sigmove 04:22:57 DEBUG] transformed Z81Mb.SPC -> Z81MB.SPC
[sigmove 04:22:57 DEBUG] transformed Z81Mc.SPC -> Z81MC.SPC
[sigmove 04:22:57 DEBUG] transformed Z81Md.SPC -> Z81MD.SPC
[sigmove 04:22:57 DEBUG] transformed Z81Me.SPC -> Z81ME.SPC
[sigmove 04:22:57 DEBUG] transformed Z81Mf.SPC -> Z81MF.SPC
[Status 04:22:57 INFO] data for Z81 transferred to science data processing
[Tidy 04:22:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:22:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:22:57 INFO] resetting WatchDogTimer
[Status 04:22:57 INFO] Starting Set [AERI set: name A82, 6 scans, 120 angle, D28300 command]
[Ingest 04:22:57 INFO] Sending XML status message
[Status 04:22:57 INFO] Mirror angle: 120
[Mirror 04:22:57 INFO] rotating to position A
[Status 04:22:59 INFO] .SET file for ACQ96 ready
[Ingest 04:22:59 INFO] Starting acquisition
[Status 04:22:59 INFO] reading housekeeping
[Status 04:23:17 INFO] acquire complete
[Status 04:23:17 INFO] writing housekeeping
[Sequencer 04:23:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:23:17 INFO] incremented A scene to 82 completed views
[Sequencer 04:23:17 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:23:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:23:17 INFO] incremented to [AERI set: name H82, 6 scans, 60 angle, D22500 command] set
[sigmove 04:23:17 INFO] A82.SIG(18)
[sigmove 04:23:17 DEBUG] transformed A82Ma.SPC -> A82MA.SPC
[sigmove 04:23:17 DEBUG] transformed A82Mb.SPC -> A82MB.SPC
[sigmove 04:23:17 DEBUG] transformed A82Mc.SPC -> A82MC.SPC
[sigmove 04:23:17 DEBUG] transformed A82Md.SPC -> A82MD.SPC
[sigmove 04:23:17 DEBUG] transformed A82Me.SPC -> A82ME.SPC
[sigmove 04:23:17 DEBUG] transformed A82Mf.SPC -> A82MF.SPC
[Status 04:23:17 INFO] data for A82 transferred to science data processing
[Tidy 04:23:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:23:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:23:17 INFO] resetting WatchDogTimer
[Status 04:23:17 INFO] Starting Set [AERI set: name H82, 6 scans, 60 angle, D22500 command]
[Ingest 04:23:17 INFO] Sending XML status message
[Status 04:23:17 INFO] Mirror angle: 60
[Mirror 04:23:18 INFO] rotating to position H
[Status 04:23:18 INFO] .SET file for ACQ96 ready
[Ingest 04:23:18 INFO] Starting acquisition
[Status 04:23:19 INFO] reading housekeeping
[Status 04:23:36 INFO] acquire complete
[Status 04:23:36 INFO] writing housekeeping
[Sequencer 04:23:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:23:36 INFO] incremented H scene to 82 completed views
[Sequencer 04:23:36 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:23:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:23:36 INFO] incremented to [AERI set: name S82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:23:36 INFO] H82.SIG(18)
[sigmove 04:23:36 DEBUG] transformed H82Ma.SPC -> H82MA.SPC
[sigmove 04:23:36 DEBUG] transformed H82Mb.SPC -> H82MB.SPC
[sigmove 04:23:36 DEBUG] transformed H82Mc.SPC -> H82MC.SPC
[sigmove 04:23:36 DEBUG] transformed H82Md.SPC -> H82MD.SPC
[sigmove 04:23:36 DEBUG] transformed H82Me.SPC -> H82ME.SPC
[sigmove 04:23:36 DEBUG] transformed H82Mf.SPC -> H82MF.SPC
[Status 04:23:36 INFO] data for H82 transferred to science data processing
[Tidy 04:23:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:23:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:23:36 INFO] resetting WatchDogTimer
[Status 04:23:36 INFO] Starting Set [AERI set: name S82, 6 scans, 0 angle, D16300 command]
[Ingest 04:23:36 INFO] Sending XML status message
[Status 04:23:36 INFO] Mirror angle: 0
[Mirror 04:23:37 INFO] rotating to position S
[Status 04:23:37 INFO] .SET file for ACQ96 ready
[Ingest 04:23:37 INFO] Starting acquisition
[Status 04:23:38 INFO] reading housekeeping
[Status 04:23:56 INFO] acquire complete
[Status 04:23:57 INFO] writing housekeeping
[Sequencer 04:23:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:23:57 INFO] incremented S scene to 82 completed views
[Sequencer 04:23:57 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:23:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:23:57 INFO] incremented to [AERI set: name T82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:23:57 INFO] S82.SIG(18)
[sigmove 04:23:57 DEBUG] transformed S82Ma.SPC -> S82MA.SPC
[sigmove 04:23:57 DEBUG] transformed S82Mb.SPC -> S82MB.SPC
[sigmove 04:23:57 DEBUG] transformed S82Mc.SPC -> S82MC.SPC
[sigmove 04:23:57 DEBUG] transformed S82Md.SPC -> S82MD.SPC
[sigmove 04:23:57 DEBUG] transformed S82Me.SPC -> S82ME.SPC
[sigmove 04:23:57 DEBUG] transformed S82Mf.SPC -> S82MF.SPC
[Status 04:23:57 INFO] data for S82 transferred to science data processing
[Tidy 04:23:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:23:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:23:57 INFO] resetting WatchDogTimer
[Status 04:23:57 INFO] Starting Set [AERI set: name T82, 6 scans, 0 angle, D16300 command]
[Ingest 04:23:57 INFO] Sending XML status message
[Status 04:23:57 INFO] Mirror angle: 0
[Mirror 04:23:57 INFO] rotating to position T
[Status 04:23:57 INFO] .SET file for ACQ96 ready
[Ingest 04:23:57 INFO] Starting acquisition
[Status 04:23:57 INFO] reading housekeeping
[Status 04:24:15 INFO] acquire complete
[Status 04:24:16 INFO] writing housekeeping
[Sequencer 04:24:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:24:16 INFO] incremented T scene to 82 completed views
[Sequencer 04:24:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:24:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:24:16 INFO] incremented to [AERI set: name U82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:24:16 INFO] T82.SIG(18)
[sigmove 04:24:16 DEBUG] transformed T82Ma.SPC -> T82MA.SPC
[sigmove 04:24:16 DEBUG] transformed T82Mb.SPC -> T82MB.SPC
[sigmove 04:24:16 DEBUG] transformed T82Mc.SPC -> T82MC.SPC
[sigmove 04:24:16 DEBUG] transformed T82Md.SPC -> T82MD.SPC
[sigmove 04:24:16 DEBUG] transformed T82Me.SPC -> T82ME.SPC
[sigmove 04:24:16 DEBUG] transformed T82Mf.SPC -> T82MF.SPC
[Status 04:24:16 INFO] data for T82 transferred to science data processing
[Tidy 04:24:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:24:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:24:16 INFO] resetting WatchDogTimer
[Status 04:24:16 INFO] Starting Set [AERI set: name U82, 6 scans, 0 angle, D16300 command]
[Ingest 04:24:16 INFO] Sending XML status message
[Status 04:24:16 INFO] Mirror angle: 0
[Mirror 04:24:16 INFO] rotating to position U
[Status 04:24:16 INFO] .SET file for ACQ96 ready
[Ingest 04:24:16 INFO] Starting acquisition
[Status 04:24:16 INFO] reading housekeeping
[Status 04:24:34 INFO] acquire complete
[Status 04:24:35 INFO] writing housekeeping
[Sequencer 04:24:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:24:35 INFO] incremented U scene to 82 completed views
[Sequencer 04:24:35 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:24:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:24:35 INFO] incremented to [AERI set: name V82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:24:35 INFO] U82.SIG(18)
[sigmove 04:24:35 DEBUG] transformed U82Ma.SPC -> U82MA.SPC
[sigmove 04:24:35 DEBUG] transformed U82Mb.SPC -> U82MB.SPC
[sigmove 04:24:35 DEBUG] transformed U82Mc.SPC -> U82MC.SPC
[sigmove 04:24:35 DEBUG] transformed U82Md.SPC -> U82MD.SPC
[sigmove 04:24:35 DEBUG] transformed U82Me.SPC -> U82ME.SPC
[sigmove 04:24:35 DEBUG] transformed U82Mf.SPC -> U82MF.SPC
[Status 04:24:35 INFO] data for U82 transferred to science data processing
[Tidy 04:24:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:24:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:24:35 INFO] resetting WatchDogTimer
[Status 04:24:35 INFO] Starting Set [AERI set: name V82, 6 scans, 0 angle, D16300 command]
[Ingest 04:24:35 INFO] Sending XML status message
[Status 04:24:35 INFO] Mirror angle: 0
[Mirror 04:24:35 INFO] rotating to position V
[Status 04:24:35 INFO] .SET file for ACQ96 ready
[Ingest 04:24:35 INFO] Starting acquisition
[Status 04:24:35 INFO] reading housekeeping
[Status 04:24:53 INFO] acquire complete
[Status 04:24:54 INFO] writing housekeeping
[Sequencer 04:24:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:24:54 INFO] incremented V scene to 82 completed views
[Sequencer 04:24:54 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:24:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:24:54 INFO] incremented to [AERI set: name W82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:24:54 INFO] V82.SIG(18)
[sigmove 04:24:54 DEBUG] transformed V82Ma.SPC -> V82MA.SPC
[sigmove 04:24:54 DEBUG] transformed V82Mb.SPC -> V82MB.SPC
[sigmove 04:24:54 DEBUG] transformed V82Mc.SPC -> V82MC.SPC
[sigmove 04:24:54 DEBUG] transformed V82Md.SPC -> V82MD.SPC
[sigmove 04:24:54 DEBUG] transformed V82Me.SPC -> V82ME.SPC
[sigmove 04:24:54 DEBUG] transformed V82Mf.SPC -> V82MF.SPC
[Status 04:24:54 INFO] data for V82 transferred to science data processing
[Tidy 04:24:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:24:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:24:54 INFO] resetting WatchDogTimer
[Status 04:24:54 INFO] Starting Set [AERI set: name W82, 6 scans, 0 angle, D16300 command]
[Ingest 04:24:54 INFO] Sending XML status message
[Status 04:24:54 INFO] Mirror angle: 0
[Mirror 04:24:54 INFO] rotating to position W
[Status 04:24:54 INFO] .SET file for ACQ96 ready
[Ingest 04:24:54 INFO] Starting acquisition
[Status 04:24:55 INFO] reading housekeeping
[Status 04:25:12 INFO] acquire complete
[Status 04:25:13 INFO] writing housekeeping
[Sequencer 04:25:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:25:13 INFO] incremented W scene to 82 completed views
[Sequencer 04:25:13 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:25:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:25:13 INFO] incremented to [AERI set: name X82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:25:13 INFO] W82.SIG(18)
[sigmove 04:25:13 DEBUG] transformed W82Ma.SPC -> W82MA.SPC
[sigmove 04:25:13 DEBUG] transformed W82Mb.SPC -> W82MB.SPC
[sigmove 04:25:13 DEBUG] transformed W82Mc.SPC -> W82MC.SPC
[sigmove 04:25:13 DEBUG] transformed W82Md.SPC -> W82MD.SPC
[sigmove 04:25:13 DEBUG] transformed W82Me.SPC -> W82ME.SPC
[sigmove 04:25:13 DEBUG] transformed W82Mf.SPC -> W82MF.SPC
[Status 04:25:13 INFO] data for W82 transferred to science data processing
[Tidy 04:25:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:25:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:25:13 INFO] resetting WatchDogTimer
[Status 04:25:13 INFO] Starting Set [AERI set: name X82, 6 scans, 0 angle, D16300 command]
[Ingest 04:25:13 INFO] Sending XML status message
[Status 04:25:13 INFO] Mirror angle: 0
[Mirror 04:25:13 INFO] rotating to position X
[Status 04:25:13 INFO] .SET file for ACQ96 ready
[Ingest 04:25:14 INFO] Starting acquisition
[Status 04:25:14 INFO] reading housekeeping
[Status 04:25:32 INFO] acquire complete
[Status 04:25:32 INFO] writing housekeeping
[Sequencer 04:25:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:25:32 INFO] incremented X scene to 82 completed views
[Sequencer 04:25:32 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:25:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:25:32 INFO] incremented to [AERI set: name Y82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:25:32 INFO] X82.SIG(18)
[sigmove 04:25:32 DEBUG] transformed X82Ma.SPC -> X82MA.SPC
[sigmove 04:25:32 DEBUG] transformed X82Mb.SPC -> X82MB.SPC
[sigmove 04:25:32 DEBUG] transformed X82Mc.SPC -> X82MC.SPC
[sigmove 04:25:32 DEBUG] transformed X82Md.SPC -> X82MD.SPC
[sigmove 04:25:32 DEBUG] transformed X82Me.SPC -> X82ME.SPC
[sigmove 04:25:32 DEBUG] transformed X82Mf.SPC -> X82MF.SPC
[Status 04:25:32 INFO] data for X82 transferred to science data processing
[Tidy 04:25:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:25:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:25:32 INFO] resetting WatchDogTimer
[Status 04:25:32 INFO] Starting Set [AERI set: name Y82, 6 scans, 0 angle, D16300 command]
[Ingest 04:25:32 INFO] Sending XML status message
[Status 04:25:32 INFO] Mirror angle: 0
[Mirror 04:25:32 INFO] rotating to position Y
[Status 04:25:32 INFO] .SET file for ACQ96 ready
[Ingest 04:25:33 INFO] Starting acquisition
[Status 04:25:33 INFO] reading housekeeping
[Status 04:25:51 INFO] acquire complete
[Status 04:25:51 INFO] writing housekeeping
[Sequencer 04:25:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:25:51 INFO] incremented Y scene to 82 completed views
[Sequencer 04:25:51 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:25:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:25:51 INFO] incremented to [AERI set: name Z82, 6 scans, 0 angle, D16300 command] set
[sigmove 04:25:51 INFO] Y82.SIG(18)
[sigmove 04:25:51 DEBUG] transformed Y82Ma.SPC -> Y82MA.SPC
[sigmove 04:25:51 DEBUG] transformed Y82Mb.SPC -> Y82MB.SPC
[sigmove 04:25:51 DEBUG] transformed Y82Mc.SPC -> Y82MC.SPC
[sigmove 04:25:51 DEBUG] transformed Y82Md.SPC -> Y82MD.SPC
[sigmove 04:25:51 DEBUG] transformed Y82Me.SPC -> Y82ME.SPC
[sigmove 04:25:51 DEBUG] transformed Y82Mf.SPC -> Y82MF.SPC
[Status 04:25:51 INFO] data for Y82 transferred to science data processing
[Tidy 04:25:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:25:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:25:51 INFO] resetting WatchDogTimer
[Status 04:25:51 INFO] Starting Set [AERI set: name Z82, 6 scans, 0 angle, D16300 command]
[Ingest 04:25:51 INFO] Sending XML status message
[Status 04:25:51 INFO] Mirror angle: 0
[Mirror 04:25:51 INFO] rotating to position Z
[Status 04:25:52 INFO] .SET file for ACQ96 ready
[Ingest 04:25:52 INFO] Starting acquisition
[Status 04:25:52 INFO] reading housekeeping
[Status 04:26:10 INFO] acquire complete
[Status 04:26:10 INFO] writing housekeeping
[Sequencer 04:26:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:26:10 INFO] incremented Z scene to 82 completed views
[Sequencer 04:26:10 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:26:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:26:10 INFO] incremented to [AERI set: name H83, 6 scans, 60 angle, D22500 command] set
[sigmove 04:26:10 INFO] Z82.SIG(18)
[sigmove 04:26:10 DEBUG] transformed Z82Ma.SPC -> Z82MA.SPC
[sigmove 04:26:10 DEBUG] transformed Z82Mb.SPC -> Z82MB.SPC
[sigmove 04:26:10 DEBUG] transformed Z82Mc.SPC -> Z82MC.SPC
[sigmove 04:26:10 DEBUG] transformed Z82Md.SPC -> Z82MD.SPC
[sigmove 04:26:10 DEBUG] transformed Z82Me.SPC -> Z82ME.SPC
[sigmove 04:26:10 DEBUG] transformed Z82Mf.SPC -> Z82MF.SPC
[Status 04:26:10 INFO] data for Z82 transferred to science data processing
[Tidy 04:26:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:26:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:26:10 INFO] resetting WatchDogTimer
[Status 04:26:10 INFO] Starting Set [AERI set: name H83, 6 scans, 60 angle, D22500 command]
[Ingest 04:26:10 INFO] Sending XML status message
[Status 04:26:10 INFO] Mirror angle: 60
[Mirror 04:26:10 INFO] rotating to position H
[Status 04:26:11 INFO] .SET file for ACQ96 ready
[Ingest 04:26:11 INFO] Starting acquisition
[Status 04:26:11 INFO] reading housekeeping
[Status 04:26:30 INFO] acquire complete
[Status 04:26:30 INFO] writing housekeeping
[Sequencer 04:26:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:26:30 INFO] incremented H scene to 83 completed views
[Sequencer 04:26:30 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:26:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:26:30 INFO] incremented to [AERI set: name A83, 6 scans, 120 angle, D28300 command] set
[sigmove 04:26:30 INFO] H83.SIG(18)
[sigmove 04:26:30 DEBUG] transformed H83Ma.SPC -> H83MA.SPC
[sigmove 04:26:30 DEBUG] transformed H83Mb.SPC -> H83MB.SPC
[sigmove 04:26:30 DEBUG] transformed H83Mc.SPC -> H83MC.SPC
[sigmove 04:26:30 DEBUG] transformed H83Md.SPC -> H83MD.SPC
[sigmove 04:26:30 DEBUG] transformed H83Me.SPC -> H83ME.SPC
[sigmove 04:26:30 DEBUG] transformed H83Mf.SPC -> H83MF.SPC
[Status 04:26:30 INFO] data for H83 transferred to science data processing
[Tidy 04:26:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:26:30 INFO] A81.FIN(19),H81.FIN(19),S81.FIN(19),T81.FIN(19),U81.FIN(19),V81.FIN(19),W81.FIN(19),X81.FIN(19),Y81.FIN(19),Z81.FIN(19),A82.FIN(19),H82.FIN(19),S82.FIN(19),T82.FIN(19),U82.FIN(19),V82.FIN(19),W82.FIN(19),X82.FIN(19),Y82.FIN(19),Z82.FIN(19)
[sigmove 04:26:30 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:26:30 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:26:32 DEBUG] done zipping
[WatchDog 04:26:32 INFO] resetting WatchDogTimer
[Status 04:26:32 INFO] Starting Set [AERI set: name A83, 6 scans, 120 angle, D28300 command]
[Ingest 04:26:32 INFO] Sending XML status message
[Status 04:26:32 INFO] Mirror angle: 120
[Mirror 04:26:32 INFO] rotating to position A
[Status 04:26:33 INFO] .SET file for ACQ96 ready
[Ingest 04:26:33 INFO] Starting acquisition
[Status 04:26:33 INFO] reading housekeeping
[Status 04:26:51 INFO] acquire complete
[Status 04:26:52 INFO] writing housekeeping
[Sequencer 04:26:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:26:52 INFO] incremented A scene to 83 completed views
[Sequencer 04:26:52 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:26:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:26:52 INFO] incremented to [AERI set: name S83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:26:52 INFO] A83.SIG(18)
[sigmove 04:26:52 DEBUG] transformed A83Ma.SPC -> A83MA.SPC
[sigmove 04:26:52 DEBUG] transformed A83Mb.SPC -> A83MB.SPC
[sigmove 04:26:52 DEBUG] transformed A83Mc.SPC -> A83MC.SPC
[sigmove 04:26:52 DEBUG] transformed A83Md.SPC -> A83MD.SPC
[sigmove 04:26:52 DEBUG] transformed A83Me.SPC -> A83ME.SPC
[sigmove 04:26:52 DEBUG] transformed A83Mf.SPC -> A83MF.SPC
[Status 04:26:52 INFO] data for A83 transferred to science data processing
[Tidy 04:26:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:26:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:26:52 INFO] resetting WatchDogTimer
[Status 04:26:52 INFO] Starting Set [AERI set: name S83, 6 scans, 0 angle, D16300 command]
[Ingest 04:26:52 INFO] Sending XML status message
[Status 04:26:52 INFO] Mirror angle: 0
[Mirror 04:26:52 INFO] rotating to position S
[Status 04:26:53 INFO] .SET file for ACQ96 ready
[Ingest 04:26:53 INFO] Starting acquisition
[Status 04:26:53 INFO] reading housekeeping
[Status 04:27:11 INFO] acquire complete
[Status 04:27:12 INFO] writing housekeeping
[Sequencer 04:27:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:27:12 INFO] incremented S scene to 83 completed views
[Sequencer 04:27:12 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:27:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:27:12 INFO] incremented to [AERI set: name T83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:27:12 INFO] S83.SIG(18)
[sigmove 04:27:12 DEBUG] transformed S83Ma.SPC -> S83MA.SPC
[sigmove 04:27:12 DEBUG] transformed S83Mb.SPC -> S83MB.SPC
[sigmove 04:27:12 DEBUG] transformed S83Mc.SPC -> S83MC.SPC
[sigmove 04:27:12 DEBUG] transformed S83Md.SPC -> S83MD.SPC
[sigmove 04:27:12 DEBUG] transformed S83Me.SPC -> S83ME.SPC
[sigmove 04:27:12 DEBUG] transformed S83Mf.SPC -> S83MF.SPC
[Status 04:27:12 INFO] data for S83 transferred to science data processing
[Tidy 04:27:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:27:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:27:12 INFO] resetting WatchDogTimer
[Status 04:27:12 INFO] Starting Set [AERI set: name T83, 6 scans, 0 angle, D16300 command]
[Ingest 04:27:12 INFO] Sending XML status message
[Status 04:27:12 INFO] Mirror angle: 0
[Mirror 04:27:12 INFO] rotating to position T
[Status 04:27:12 INFO] .SET file for ACQ96 ready
[Ingest 04:27:13 INFO] Starting acquisition
[Status 04:27:13 INFO] reading housekeeping
[Status 04:27:31 INFO] acquire complete
[Status 04:27:31 INFO] writing housekeeping
[Sequencer 04:27:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:27:31 INFO] incremented T scene to 83 completed views
[Sequencer 04:27:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:27:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:27:31 INFO] incremented to [AERI set: name U83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:27:31 INFO] T83.SIG(18)
[sigmove 04:27:31 DEBUG] transformed T83Ma.SPC -> T83MA.SPC
[sigmove 04:27:31 DEBUG] transformed T83Mb.SPC -> T83MB.SPC
[sigmove 04:27:31 DEBUG] transformed T83Mc.SPC -> T83MC.SPC
[sigmove 04:27:31 DEBUG] transformed T83Md.SPC -> T83MD.SPC
[sigmove 04:27:31 DEBUG] transformed T83Me.SPC -> T83ME.SPC
[sigmove 04:27:31 DEBUG] transformed T83Mf.SPC -> T83MF.SPC
[Status 04:27:31 INFO] data for T83 transferred to science data processing
[Tidy 04:27:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:27:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:27:31 INFO] resetting WatchDogTimer
[Status 04:27:31 INFO] Starting Set [AERI set: name U83, 6 scans, 0 angle, D16300 command]
[Ingest 04:27:31 INFO] Sending XML status message
[Status 04:27:31 INFO] Mirror angle: 0
[Mirror 04:27:31 INFO] rotating to position U
[Status 04:27:31 INFO] .SET file for ACQ96 ready
[Ingest 04:27:32 INFO] Starting acquisition
[Status 04:27:32 INFO] reading housekeeping
[Status 04:27:50 INFO] acquire complete
[Status 04:27:50 INFO] writing housekeeping
[Sequencer 04:27:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:27:50 INFO] incremented U scene to 83 completed views
[Sequencer 04:27:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:27:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:27:50 INFO] incremented to [AERI set: name V83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:27:50 INFO] U83.SIG(18)
[sigmove 04:27:50 DEBUG] transformed U83Ma.SPC -> U83MA.SPC
[sigmove 04:27:50 DEBUG] transformed U83Mb.SPC -> U83MB.SPC
[sigmove 04:27:50 DEBUG] transformed U83Mc.SPC -> U83MC.SPC
[sigmove 04:27:50 DEBUG] transformed U83Md.SPC -> U83MD.SPC
[sigmove 04:27:50 DEBUG] transformed U83Me.SPC -> U83ME.SPC
[sigmove 04:27:50 DEBUG] transformed U83Mf.SPC -> U83MF.SPC
[Status 04:27:50 INFO] data for U83 transferred to science data processing
[Tidy 04:27:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:27:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:27:50 INFO] resetting WatchDogTimer
[Status 04:27:50 INFO] Starting Set [AERI set: name V83, 6 scans, 0 angle, D16300 command]
[Ingest 04:27:50 INFO] Sending XML status message
[Status 04:27:50 INFO] Mirror angle: 0
[Mirror 04:27:50 INFO] rotating to position V
[Status 04:27:51 INFO] .SET file for ACQ96 ready
[Ingest 04:27:51 INFO] Starting acquisition
[Status 04:27:51 INFO] reading housekeeping
[Status 04:28:09 INFO] acquire complete
[Status 04:28:09 INFO] writing housekeeping
[Sequencer 04:28:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:28:09 INFO] incremented V scene to 83 completed views
[Sequencer 04:28:09 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:28:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:28:09 INFO] incremented to [AERI set: name W83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:28:09 INFO] V83.SIG(18)
[sigmove 04:28:09 DEBUG] transformed V83Ma.SPC -> V83MA.SPC
[sigmove 04:28:09 DEBUG] transformed V83Mb.SPC -> V83MB.SPC
[sigmove 04:28:09 DEBUG] transformed V83Mc.SPC -> V83MC.SPC
[sigmove 04:28:09 DEBUG] transformed V83Md.SPC -> V83MD.SPC
[sigmove 04:28:09 DEBUG] transformed V83Me.SPC -> V83ME.SPC
[sigmove 04:28:09 DEBUG] transformed V83Mf.SPC -> V83MF.SPC
[Status 04:28:09 INFO] data for V83 transferred to science data processing
[Tidy 04:28:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:28:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:28:09 INFO] resetting WatchDogTimer
[Status 04:28:09 INFO] Starting Set [AERI set: name W83, 6 scans, 0 angle, D16300 command]
[Ingest 04:28:09 INFO] Sending XML status message
[Status 04:28:09 INFO] Mirror angle: 0
[Mirror 04:28:09 INFO] rotating to position W
[Status 04:28:10 INFO] .SET file for ACQ96 ready
[Ingest 04:28:10 INFO] Starting acquisition
[Status 04:28:10 INFO] reading housekeeping
[Status 04:28:28 INFO] acquire complete
[Status 04:28:28 INFO] writing housekeeping
[Sequencer 04:28:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:28:28 INFO] incremented W scene to 83 completed views
[Sequencer 04:28:28 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:28:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:28:28 INFO] incremented to [AERI set: name X83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:28:28 INFO] W83.SIG(18)
[sigmove 04:28:28 DEBUG] transformed W83Ma.SPC -> W83MA.SPC
[sigmove 04:28:28 DEBUG] transformed W83Mb.SPC -> W83MB.SPC
[sigmove 04:28:28 DEBUG] transformed W83Mc.SPC -> W83MC.SPC
[sigmove 04:28:28 DEBUG] transformed W83Md.SPC -> W83MD.SPC
[sigmove 04:28:28 DEBUG] transformed W83Me.SPC -> W83ME.SPC
[sigmove 04:28:28 DEBUG] transformed W83Mf.SPC -> W83MF.SPC
[Status 04:28:28 INFO] data for W83 transferred to science data processing
[Tidy 04:28:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:28:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:28:28 INFO] resetting WatchDogTimer
[Status 04:28:28 INFO] Starting Set [AERI set: name X83, 6 scans, 0 angle, D16300 command]
[Ingest 04:28:28 INFO] Sending XML status message
[Status 04:28:28 INFO] Mirror angle: 0
[Mirror 04:28:29 INFO] rotating to position X
[Status 04:28:29 INFO] .SET file for ACQ96 ready
[Ingest 04:28:29 INFO] Starting acquisition
[Status 04:28:29 INFO] reading housekeeping
[Status 04:28:47 INFO] acquire complete
[Status 04:28:47 INFO] writing housekeeping
[Sequencer 04:28:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:28:47 INFO] incremented X scene to 83 completed views
[Sequencer 04:28:47 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:28:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:28:47 INFO] incremented to [AERI set: name Y83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:28:47 INFO] X83.SIG(18)
[sigmove 04:28:47 DEBUG] transformed X83Ma.SPC -> X83MA.SPC
[sigmove 04:28:47 DEBUG] transformed X83Mb.SPC -> X83MB.SPC
[sigmove 04:28:47 DEBUG] transformed X83Mc.SPC -> X83MC.SPC
[sigmove 04:28:47 DEBUG] transformed X83Md.SPC -> X83MD.SPC
[sigmove 04:28:47 DEBUG] transformed X83Me.SPC -> X83ME.SPC
[sigmove 04:28:47 DEBUG] transformed X83Mf.SPC -> X83MF.SPC
[Status 04:28:47 INFO] data for X83 transferred to science data processing
[Tidy 04:28:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:28:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:28:47 INFO] resetting WatchDogTimer
[Status 04:28:47 INFO] Starting Set [AERI set: name Y83, 6 scans, 0 angle, D16300 command]
[Ingest 04:28:47 INFO] Sending XML status message
[Status 04:28:47 INFO] Mirror angle: 0
[Mirror 04:28:48 INFO] rotating to position Y
[Status 04:28:48 INFO] .SET file for ACQ96 ready
[Ingest 04:28:48 INFO] Starting acquisition
[Status 04:28:48 INFO] reading housekeeping
[Status 04:29:06 INFO] acquire complete
[Status 04:29:06 INFO] writing housekeeping
[Sequencer 04:29:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:29:06 INFO] incremented Y scene to 83 completed views
[Sequencer 04:29:06 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:29:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:29:06 INFO] incremented to [AERI set: name Z83, 6 scans, 0 angle, D16300 command] set
[sigmove 04:29:06 INFO] Y83.SIG(18)
[sigmove 04:29:06 DEBUG] transformed Y83Ma.SPC -> Y83MA.SPC
[sigmove 04:29:06 DEBUG] transformed Y83Mb.SPC -> Y83MB.SPC
[sigmove 04:29:06 DEBUG] transformed Y83Mc.SPC -> Y83MC.SPC
[sigmove 04:29:06 DEBUG] transformed Y83Md.SPC -> Y83MD.SPC
[sigmove 04:29:06 DEBUG] transformed Y83Me.SPC -> Y83ME.SPC
[sigmove 04:29:06 DEBUG] transformed Y83Mf.SPC -> Y83MF.SPC
[Status 04:29:06 INFO] data for Y83 transferred to science data processing
[Tidy 04:29:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:29:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:29:06 INFO] resetting WatchDogTimer
[Status 04:29:07 INFO] Starting Set [AERI set: name Z83, 6 scans, 0 angle, D16300 command]
[Ingest 04:29:07 INFO] Sending XML status message
[Status 04:29:07 INFO] Mirror angle: 0
[Mirror 04:29:07 INFO] rotating to position Z
[Status 04:29:07 INFO] .SET file for ACQ96 ready
[Ingest 04:29:07 INFO] Starting acquisition
[Status 04:29:07 INFO] reading housekeeping
[Status 04:29:25 INFO] acquire complete
[Status 04:29:25 INFO] writing housekeeping
[Sequencer 04:29:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:29:25 INFO] incremented Z scene to 83 completed views
[Sequencer 04:29:25 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:29:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:29:25 INFO] incremented to [AERI set: name A84, 6 scans, 120 angle, D28300 command] set
[sigmove 04:29:25 INFO] Z83.SIG(18)
[sigmove 04:29:26 DEBUG] transformed Z83Ma.SPC -> Z83MA.SPC
[sigmove 04:29:26 DEBUG] transformed Z83Mb.SPC -> Z83MB.SPC
[sigmove 04:29:26 DEBUG] transformed Z83Mc.SPC -> Z83MC.SPC
[sigmove 04:29:26 DEBUG] transformed Z83Md.SPC -> Z83MD.SPC
[sigmove 04:29:26 DEBUG] transformed Z83Me.SPC -> Z83ME.SPC
[sigmove 04:29:26 DEBUG] transformed Z83Mf.SPC -> Z83MF.SPC
[Status 04:29:26 INFO] data for Z83 transferred to science data processing
[Tidy 04:29:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:29:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:29:26 INFO] resetting WatchDogTimer
[Status 04:29:26 INFO] Starting Set [AERI set: name A84, 6 scans, 120 angle, D28300 command]
[Ingest 04:29:26 INFO] Sending XML status message
[Status 04:29:26 INFO] Mirror angle: 120
[Mirror 04:29:26 INFO] rotating to position A
[Status 04:29:27 INFO] .SET file for ACQ96 ready
[Ingest 04:29:27 INFO] Starting acquisition
[Status 04:29:27 INFO] reading housekeeping
[Status 04:29:45 INFO] acquire complete
[Status 04:29:46 INFO] writing housekeeping
[Sequencer 04:29:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:29:46 INFO] incremented A scene to 84 completed views
[Sequencer 04:29:46 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:29:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:29:46 INFO] incremented to [AERI set: name H84, 6 scans, 60 angle, D22500 command] set
[sigmove 04:29:46 INFO] A84.SIG(18)
[sigmove 04:29:46 DEBUG] transformed A84Ma.SPC -> A84MA.SPC
[sigmove 04:29:46 DEBUG] transformed A84Mb.SPC -> A84MB.SPC
[sigmove 04:29:46 DEBUG] transformed A84Mc.SPC -> A84MC.SPC
[sigmove 04:29:46 DEBUG] transformed A84Md.SPC -> A84MD.SPC
[sigmove 04:29:46 DEBUG] transformed A84Me.SPC -> A84ME.SPC
[sigmove 04:29:46 DEBUG] transformed A84Mf.SPC -> A84MF.SPC
[Status 04:29:46 INFO] data for A84 transferred to science data processing
[Tidy 04:29:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:29:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:29:46 INFO] resetting WatchDogTimer
[Status 04:29:46 INFO] Starting Set [AERI set: name H84, 6 scans, 60 angle, D22500 command]
[Ingest 04:29:46 INFO] Sending XML status message
[Status 04:29:46 INFO] Mirror angle: 60
[Mirror 04:29:46 INFO] rotating to position H
[Status 04:29:47 INFO] .SET file for ACQ96 ready
[Ingest 04:29:47 INFO] Starting acquisition
[Status 04:29:47 INFO] reading housekeeping
[Status 04:30:04 INFO] acquire complete
[Status 04:30:05 INFO] writing housekeeping
[Sequencer 04:30:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:30:05 INFO] incremented H scene to 84 completed views
[Sequencer 04:30:05 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:30:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:30:05 INFO] incremented to [AERI set: name S84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:30:05 INFO] H84.SIG(18)
[sigmove 04:30:05 DEBUG] transformed H84Ma.SPC -> H84MA.SPC
[sigmove 04:30:05 DEBUG] transformed H84Mb.SPC -> H84MB.SPC
[sigmove 04:30:05 DEBUG] transformed H84Mc.SPC -> H84MC.SPC
[sigmove 04:30:05 DEBUG] transformed H84Md.SPC -> H84MD.SPC
[sigmove 04:30:05 DEBUG] transformed H84Me.SPC -> H84ME.SPC
[sigmove 04:30:05 DEBUG] transformed H84Mf.SPC -> H84MF.SPC
[Status 04:30:05 INFO] data for H84 transferred to science data processing
[Tidy 04:30:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:30:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:30:05 INFO] resetting WatchDogTimer
[Status 04:30:05 INFO] Starting Set [AERI set: name S84, 6 scans, 0 angle, D16300 command]
[Ingest 04:30:05 INFO] Sending XML status message
[Status 04:30:05 INFO] Mirror angle: 0
[Mirror 04:30:05 INFO] rotating to position S
[Status 04:30:06 INFO] .SET file for ACQ96 ready
[Ingest 04:30:06 INFO] Starting acquisition
[Status 04:30:06 INFO] reading housekeeping
[Status 04:30:25 INFO] acquire complete
[Status 04:30:25 INFO] writing housekeeping
[Sequencer 04:30:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:30:25 INFO] incremented S scene to 84 completed views
[Sequencer 04:30:25 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:30:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:30:25 INFO] incremented to [AERI set: name T84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:30:25 INFO] S84.SIG(18)
[sigmove 04:30:25 DEBUG] transformed S84Ma.SPC -> S84MA.SPC
[sigmove 04:30:25 DEBUG] transformed S84Mb.SPC -> S84MB.SPC
[sigmove 04:30:25 DEBUG] transformed S84Mc.SPC -> S84MC.SPC
[sigmove 04:30:25 DEBUG] transformed S84Md.SPC -> S84MD.SPC
[sigmove 04:30:25 DEBUG] transformed S84Me.SPC -> S84ME.SPC
[sigmove 04:30:25 DEBUG] transformed S84Mf.SPC -> S84MF.SPC
[Status 04:30:25 INFO] data for S84 transferred to science data processing
[Tidy 04:30:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:30:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:30:25 INFO] resetting WatchDogTimer
[Status 04:30:25 INFO] Starting Set [AERI set: name T84, 6 scans, 0 angle, D16300 command]
[Ingest 04:30:25 INFO] Sending XML status message
[Status 04:30:25 INFO] Mirror angle: 0
[Mirror 04:30:25 INFO] rotating to position T
[Status 04:30:26 INFO] .SET file for ACQ96 ready
[Ingest 04:30:26 INFO] Starting acquisition
[Status 04:30:26 INFO] reading housekeeping
[Status 04:30:44 INFO] acquire complete
[Status 04:30:44 INFO] writing housekeeping
[Sequencer 04:30:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:30:44 INFO] incremented T scene to 84 completed views
[Sequencer 04:30:44 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:30:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:30:44 INFO] incremented to [AERI set: name U84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:30:44 INFO] T84.SIG(18)
[sigmove 04:30:44 DEBUG] transformed T84Ma.SPC -> T84MA.SPC
[sigmove 04:30:44 DEBUG] transformed T84Mb.SPC -> T84MB.SPC
[sigmove 04:30:44 DEBUG] transformed T84Mc.SPC -> T84MC.SPC
[sigmove 04:30:44 DEBUG] transformed T84Md.SPC -> T84MD.SPC
[sigmove 04:30:44 DEBUG] transformed T84Me.SPC -> T84ME.SPC
[sigmove 04:30:44 DEBUG] transformed T84Mf.SPC -> T84MF.SPC
[Status 04:30:44 INFO] data for T84 transferred to science data processing
[Tidy 04:30:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:30:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:30:44 INFO] resetting WatchDogTimer
[Status 04:30:44 INFO] Starting Set [AERI set: name U84, 6 scans, 0 angle, D16300 command]
[Ingest 04:30:44 INFO] Sending XML status message
[Status 04:30:44 INFO] Mirror angle: 0
[Mirror 04:30:45 INFO] rotating to position U
[Status 04:30:45 INFO] .SET file for ACQ96 ready
[Ingest 04:30:45 INFO] Starting acquisition
[Status 04:30:45 INFO] reading housekeeping
[Status 04:31:03 INFO] acquire complete
[Status 04:31:03 INFO] writing housekeeping
[Sequencer 04:31:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:31:03 INFO] incremented U scene to 84 completed views
[Sequencer 04:31:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:31:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:31:03 INFO] incremented to [AERI set: name V84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:31:03 INFO] U84.SIG(18)
[sigmove 04:31:03 DEBUG] transformed U84Ma.SPC -> U84MA.SPC
[sigmove 04:31:03 DEBUG] transformed U84Mb.SPC -> U84MB.SPC
[sigmove 04:31:03 DEBUG] transformed U84Mc.SPC -> U84MC.SPC
[sigmove 04:31:03 DEBUG] transformed U84Md.SPC -> U84MD.SPC
[sigmove 04:31:03 DEBUG] transformed U84Me.SPC -> U84ME.SPC
[sigmove 04:31:03 DEBUG] transformed U84Mf.SPC -> U84MF.SPC
[Status 04:31:03 INFO] data for U84 transferred to science data processing
[Tidy 04:31:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:31:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:31:03 INFO] resetting WatchDogTimer
[Status 04:31:03 INFO] Starting Set [AERI set: name V84, 6 scans, 0 angle, D16300 command]
[Ingest 04:31:03 INFO] Sending XML status message
[Status 04:31:03 INFO] Mirror angle: 0
[Mirror 04:31:03 INFO] rotating to position V
[Status 04:31:04 INFO] .SET file for ACQ96 ready
[Ingest 04:31:04 INFO] Starting acquisition
[Status 04:31:04 INFO] reading housekeeping
[Status 04:31:22 INFO] acquire complete
[Status 04:31:22 INFO] writing housekeeping
[Sequencer 04:31:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:31:22 INFO] incremented V scene to 84 completed views
[Sequencer 04:31:22 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:31:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:31:22 INFO] incremented to [AERI set: name W84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:31:22 INFO] V84.SIG(18)
[sigmove 04:31:22 DEBUG] transformed V84Ma.SPC -> V84MA.SPC
[sigmove 04:31:22 DEBUG] transformed V84Mb.SPC -> V84MB.SPC
[sigmove 04:31:22 DEBUG] transformed V84Mc.SPC -> V84MC.SPC
[sigmove 04:31:22 DEBUG] transformed V84Md.SPC -> V84MD.SPC
[sigmove 04:31:22 DEBUG] transformed V84Me.SPC -> V84ME.SPC
[sigmove 04:31:22 DEBUG] transformed V84Mf.SPC -> V84MF.SPC
[Status 04:31:22 INFO] data for V84 transferred to science data processing
[Tidy 04:31:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:31:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:31:22 INFO] resetting WatchDogTimer
[Status 04:31:22 INFO] Starting Set [AERI set: name W84, 6 scans, 0 angle, D16300 command]
[Ingest 04:31:22 INFO] Sending XML status message
[Status 04:31:22 INFO] Mirror angle: 0
[Mirror 04:31:23 INFO] rotating to position W
[Status 04:31:23 INFO] .SET file for ACQ96 ready
[Ingest 04:31:23 INFO] Starting acquisition
[Status 04:31:23 INFO] reading housekeeping
[Status 04:31:41 INFO] acquire complete
[Status 04:31:41 INFO] writing housekeeping
[Sequencer 04:31:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:31:41 INFO] incremented W scene to 84 completed views
[Sequencer 04:31:41 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:31:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:31:41 INFO] incremented to [AERI set: name X84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:31:41 INFO] W84.SIG(18)
[sigmove 04:31:41 DEBUG] transformed W84Ma.SPC -> W84MA.SPC
[sigmove 04:31:41 DEBUG] transformed W84Mb.SPC -> W84MB.SPC
[sigmove 04:31:41 DEBUG] transformed W84Mc.SPC -> W84MC.SPC
[sigmove 04:31:41 DEBUG] transformed W84Md.SPC -> W84MD.SPC
[sigmove 04:31:41 DEBUG] transformed W84Me.SPC -> W84ME.SPC
[sigmove 04:31:41 DEBUG] transformed W84Mf.SPC -> W84MF.SPC
[Status 04:31:41 INFO] data for W84 transferred to science data processing
[Tidy 04:31:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:31:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:31:41 INFO] resetting WatchDogTimer
[Status 04:31:41 INFO] Starting Set [AERI set: name X84, 6 scans, 0 angle, D16300 command]
[Ingest 04:31:41 INFO] Sending XML status message
[Status 04:31:41 INFO] Mirror angle: 0
[Mirror 04:31:42 INFO] rotating to position X
[Status 04:31:42 INFO] .SET file for ACQ96 ready
[Ingest 04:31:42 INFO] Starting acquisition
[Status 04:31:42 INFO] reading housekeeping
[Status 04:32:00 INFO] acquire complete
[Status 04:32:00 INFO] writing housekeeping
[Sequencer 04:32:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:32:00 INFO] incremented X scene to 84 completed views
[Sequencer 04:32:00 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:32:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:32:00 INFO] incremented to [AERI set: name Y84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:32:00 INFO] X84.SIG(18)
[sigmove 04:32:00 DEBUG] transformed X84Ma.SPC -> X84MA.SPC
[sigmove 04:32:00 DEBUG] transformed X84Mb.SPC -> X84MB.SPC
[sigmove 04:32:00 DEBUG] transformed X84Mc.SPC -> X84MC.SPC
[sigmove 04:32:00 DEBUG] transformed X84Md.SPC -> X84MD.SPC
[sigmove 04:32:00 DEBUG] transformed X84Me.SPC -> X84ME.SPC
[sigmove 04:32:00 DEBUG] transformed X84Mf.SPC -> X84MF.SPC
[Status 04:32:00 INFO] data for X84 transferred to science data processing
[Tidy 04:32:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:32:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:32:00 INFO] resetting WatchDogTimer
[Status 04:32:01 INFO] Starting Set [AERI set: name Y84, 6 scans, 0 angle, D16300 command]
[Ingest 04:32:01 INFO] Sending XML status message
[Status 04:32:01 INFO] Mirror angle: 0
[Mirror 04:32:01 INFO] rotating to position Y
[Status 04:32:01 INFO] .SET file for ACQ96 ready
[Ingest 04:32:01 INFO] Starting acquisition
[Status 04:32:01 INFO] reading housekeeping
[Status 04:32:19 INFO] acquire complete
[Status 04:32:20 INFO] writing housekeeping
[Sequencer 04:32:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:32:20 INFO] incremented Y scene to 84 completed views
[Sequencer 04:32:20 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:32:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:32:20 INFO] incremented to [AERI set: name Z84, 6 scans, 0 angle, D16300 command] set
[sigmove 04:32:20 INFO] Y84.SIG(18)
[sigmove 04:32:20 DEBUG] transformed Y84Ma.SPC -> Y84MA.SPC
[sigmove 04:32:20 DEBUG] transformed Y84Mb.SPC -> Y84MB.SPC
[sigmove 04:32:20 DEBUG] transformed Y84Mc.SPC -> Y84MC.SPC
[sigmove 04:32:20 DEBUG] transformed Y84Md.SPC -> Y84MD.SPC
[sigmove 04:32:20 DEBUG] transformed Y84Me.SPC -> Y84ME.SPC
[sigmove 04:32:20 DEBUG] transformed Y84Mf.SPC -> Y84MF.SPC
[Status 04:32:20 INFO] data for Y84 transferred to science data processing
[Tidy 04:32:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:32:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:32:20 INFO] resetting WatchDogTimer
[Status 04:32:20 INFO] Starting Set [AERI set: name Z84, 6 scans, 0 angle, D16300 command]
[Ingest 04:32:20 INFO] Sending XML status message
[Status 04:32:20 INFO] Mirror angle: 0
[Mirror 04:32:20 INFO] rotating to position Z
[Status 04:32:20 INFO] .SET file for ACQ96 ready
[Ingest 04:32:20 INFO] Starting acquisition
[Status 04:32:20 INFO] reading housekeeping
[Status 04:32:38 INFO] acquire complete
[Status 04:32:39 INFO] writing housekeeping
[Sequencer 04:32:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:32:39 INFO] incremented Z scene to 84 completed views
[Sequencer 04:32:39 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:32:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:32:39 INFO] incremented to [AERI set: name H85, 6 scans, 60 angle, D22500 command] set
[sigmove 04:32:39 INFO] Z84.SIG(18)
[sigmove 04:32:39 DEBUG] transformed Z84Ma.SPC -> Z84MA.SPC
[sigmove 04:32:39 DEBUG] transformed Z84Mb.SPC -> Z84MB.SPC
[sigmove 04:32:39 DEBUG] transformed Z84Mc.SPC -> Z84MC.SPC
[sigmove 04:32:39 DEBUG] transformed Z84Md.SPC -> Z84MD.SPC
[sigmove 04:32:39 DEBUG] transformed Z84Me.SPC -> Z84ME.SPC
[sigmove 04:32:39 DEBUG] transformed Z84Mf.SPC -> Z84MF.SPC
[Status 04:32:39 INFO] data for Z84 transferred to science data processing
[Tidy 04:32:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:32:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:32:39 INFO] resetting WatchDogTimer
[Status 04:32:39 INFO] Starting Set [AERI set: name H85, 6 scans, 60 angle, D22500 command]
[Ingest 04:32:39 INFO] Sending XML status message
[Status 04:32:39 INFO] Mirror angle: 60
[Mirror 04:32:39 INFO] rotating to position H
[Status 04:32:40 INFO] .SET file for ACQ96 ready
[Ingest 04:32:40 INFO] Starting acquisition
[Status 04:32:40 INFO] reading housekeeping
[Status 04:32:58 INFO] acquire complete
[Status 04:32:59 INFO] writing housekeeping
[Sequencer 04:32:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:32:59 INFO] incremented H scene to 85 completed views
[Sequencer 04:32:59 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:32:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:32:59 INFO] incremented to [AERI set: name A85, 6 scans, 120 angle, D28300 command] set
[sigmove 04:32:59 INFO] H85.SIG(18)
[sigmove 04:32:59 DEBUG] transformed H85Ma.SPC -> H85MA.SPC
[sigmove 04:32:59 DEBUG] transformed H85Mb.SPC -> H85MB.SPC
[sigmove 04:32:59 DEBUG] transformed H85Mc.SPC -> H85MC.SPC
[sigmove 04:32:59 DEBUG] transformed H85Md.SPC -> H85MD.SPC
[sigmove 04:32:59 DEBUG] transformed H85Me.SPC -> H85ME.SPC
[sigmove 04:32:59 DEBUG] transformed H85Mf.SPC -> H85MF.SPC
[Status 04:32:59 INFO] data for H85 transferred to science data processing
[Tidy 04:32:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:32:59 INFO] A83.FIN(19),H83.FIN(19),S83.FIN(19),T83.FIN(19),U83.FIN(19),V83.FIN(19),W83.FIN(19),X83.FIN(19),Y83.FIN(19),Z83.FIN(19),A84.FIN(19),H84.FIN(19),S84.FIN(19),T84.FIN(19),U84.FIN(19),V84.FIN(19),W84.FIN(19),X84.FIN(19),Y84.FIN(19),Z84.FIN(19)
[sigmove 04:32:59 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:32:59 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:33:01 DEBUG] done zipping
[WatchDog 04:33:01 INFO] resetting WatchDogTimer
[Status 04:33:01 INFO] Starting Set [AERI set: name A85, 6 scans, 120 angle, D28300 command]
[Ingest 04:33:01 INFO] Sending XML status message
[Status 04:33:01 INFO] Mirror angle: 120
[Mirror 04:33:01 INFO] rotating to position A
[Status 04:33:02 INFO] .SET file for ACQ96 ready
[Ingest 04:33:02 INFO] Starting acquisition
[Status 04:33:02 INFO] reading housekeeping
[Status 04:33:20 INFO] acquire complete
[Status 04:33:20 INFO] writing housekeeping
[Sequencer 04:33:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:33:20 INFO] incremented A scene to 85 completed views
[Sequencer 04:33:20 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:33:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:33:20 INFO] incremented to [AERI set: name S85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:33:20 INFO] A85.SIG(18)
[sigmove 04:33:20 DEBUG] transformed A85Ma.SPC -> A85MA.SPC
[sigmove 04:33:20 DEBUG] transformed A85Mb.SPC -> A85MB.SPC
[sigmove 04:33:20 DEBUG] transformed A85Mc.SPC -> A85MC.SPC
[sigmove 04:33:20 DEBUG] transformed A85Md.SPC -> A85MD.SPC
[sigmove 04:33:20 DEBUG] transformed A85Me.SPC -> A85ME.SPC
[sigmove 04:33:20 DEBUG] transformed A85Mf.SPC -> A85MF.SPC
[Status 04:33:20 INFO] data for A85 transferred to science data processing
[Tidy 04:33:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:33:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:33:20 INFO] resetting WatchDogTimer
[Status 04:33:20 INFO] Starting Set [AERI set: name S85, 6 scans, 0 angle, D16300 command]
[Ingest 04:33:20 INFO] Sending XML status message
[Status 04:33:20 INFO] Mirror angle: 0
[Mirror 04:33:20 INFO] rotating to position S
[Status 04:33:22 INFO] .SET file for ACQ96 ready
[Ingest 04:33:22 INFO] Starting acquisition
[Status 04:33:22 INFO] reading housekeeping
[Status 04:33:40 INFO] acquire complete
[Status 04:33:40 INFO] writing housekeeping
[Sequencer 04:33:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:33:40 INFO] incremented S scene to 85 completed views
[Sequencer 04:33:40 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:33:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:33:40 INFO] incremented to [AERI set: name T85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:33:40 INFO] S85.SIG(18)
[sigmove 04:33:40 DEBUG] transformed S85Ma.SPC -> S85MA.SPC
[sigmove 04:33:40 DEBUG] transformed S85Mb.SPC -> S85MB.SPC
[sigmove 04:33:40 DEBUG] transformed S85Mc.SPC -> S85MC.SPC
[sigmove 04:33:40 DEBUG] transformed S85Md.SPC -> S85MD.SPC
[sigmove 04:33:40 DEBUG] transformed S85Me.SPC -> S85ME.SPC
[sigmove 04:33:40 DEBUG] transformed S85Mf.SPC -> S85MF.SPC
[Status 04:33:40 INFO] data for S85 transferred to science data processing
[Tidy 04:33:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:33:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:33:40 INFO] resetting WatchDogTimer
[Status 04:33:41 INFO] Starting Set [AERI set: name T85, 6 scans, 0 angle, D16300 command]
[Ingest 04:33:41 INFO] Sending XML status message
[Status 04:33:41 INFO] Mirror angle: 0
[Mirror 04:33:41 INFO] rotating to position T
[Status 04:33:41 INFO] .SET file for ACQ96 ready
[Ingest 04:33:41 INFO] Starting acquisition
[Status 04:33:41 INFO] reading housekeeping
[Status 04:33:59 INFO] acquire complete
[Status 04:34:00 INFO] writing housekeeping
[Sequencer 04:34:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:34:00 INFO] incremented T scene to 85 completed views
[Sequencer 04:34:00 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:34:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:34:00 INFO] incremented to [AERI set: name U85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:34:00 INFO] T85.SIG(18)
[sigmove 04:34:00 DEBUG] transformed T85Ma.SPC -> T85MA.SPC
[sigmove 04:34:00 DEBUG] transformed T85Mb.SPC -> T85MB.SPC
[sigmove 04:34:00 DEBUG] transformed T85Mc.SPC -> T85MC.SPC
[sigmove 04:34:00 DEBUG] transformed T85Md.SPC -> T85MD.SPC
[sigmove 04:34:00 DEBUG] transformed T85Me.SPC -> T85ME.SPC
[sigmove 04:34:00 DEBUG] transformed T85Mf.SPC -> T85MF.SPC
[Status 04:34:00 INFO] data for T85 transferred to science data processing
[Tidy 04:34:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:34:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:34:00 INFO] resetting WatchDogTimer
[Status 04:34:00 INFO] Starting Set [AERI set: name U85, 6 scans, 0 angle, D16300 command]
[Ingest 04:34:00 INFO] Sending XML status message
[Status 04:34:00 INFO] Mirror angle: 0
[Mirror 04:34:00 INFO] rotating to position U
[Status 04:34:00 INFO] .SET file for ACQ96 ready
[Ingest 04:34:00 INFO] Starting acquisition
[Status 04:34:00 INFO] reading housekeeping
[Status 04:34:18 INFO] acquire complete
[Status 04:34:19 INFO] writing housekeeping
[Sequencer 04:34:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:34:19 INFO] incremented U scene to 85 completed views
[Sequencer 04:34:19 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:34:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:34:19 INFO] incremented to [AERI set: name V85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:34:19 INFO] U85.SIG(18)
[sigmove 04:34:19 DEBUG] transformed U85Ma.SPC -> U85MA.SPC
[sigmove 04:34:19 DEBUG] transformed U85Mb.SPC -> U85MB.SPC
[sigmove 04:34:19 DEBUG] transformed U85Mc.SPC -> U85MC.SPC
[sigmove 04:34:19 DEBUG] transformed U85Md.SPC -> U85MD.SPC
[sigmove 04:34:19 DEBUG] transformed U85Me.SPC -> U85ME.SPC
[sigmove 04:34:19 DEBUG] transformed U85Mf.SPC -> U85MF.SPC
[Status 04:34:19 INFO] data for U85 transferred to science data processing
[Tidy 04:34:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:34:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:34:19 INFO] resetting WatchDogTimer
[Status 04:34:19 INFO] Starting Set [AERI set: name V85, 6 scans, 0 angle, D16300 command]
[Ingest 04:34:19 INFO] Sending XML status message
[Status 04:34:19 INFO] Mirror angle: 0
[Mirror 04:34:19 INFO] rotating to position V
[Status 04:34:19 INFO] .SET file for ACQ96 ready
[Ingest 04:34:19 INFO] Starting acquisition
[Status 04:34:19 INFO] reading housekeeping
[Status 04:34:37 INFO] acquire complete
[Status 04:34:38 INFO] writing housekeeping
[Sequencer 04:34:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:34:38 INFO] incremented V scene to 85 completed views
[Sequencer 04:34:38 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:34:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:34:38 INFO] incremented to [AERI set: name W85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:34:38 INFO] V85.SIG(18)
[sigmove 04:34:38 DEBUG] transformed V85Ma.SPC -> V85MA.SPC
[sigmove 04:34:38 DEBUG] transformed V85Mb.SPC -> V85MB.SPC
[sigmove 04:34:38 DEBUG] transformed V85Mc.SPC -> V85MC.SPC
[sigmove 04:34:38 DEBUG] transformed V85Md.SPC -> V85MD.SPC
[sigmove 04:34:38 DEBUG] transformed V85Me.SPC -> V85ME.SPC
[sigmove 04:34:38 DEBUG] transformed V85Mf.SPC -> V85MF.SPC
[Status 04:34:38 INFO] data for V85 transferred to science data processing
[Tidy 04:34:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:34:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:34:38 INFO] resetting WatchDogTimer
[Status 04:34:38 INFO] Starting Set [AERI set: name W85, 6 scans, 0 angle, D16300 command]
[Ingest 04:34:38 INFO] Sending XML status message
[Status 04:34:38 INFO] Mirror angle: 0
[Mirror 04:34:38 INFO] rotating to position W
[Status 04:34:38 INFO] .SET file for ACQ96 ready
[Ingest 04:34:38 INFO] Starting acquisition
[Status 04:34:38 INFO] reading housekeeping
[Status 04:34:56 INFO] acquire complete
[Status 04:34:57 INFO] writing housekeeping
[Sequencer 04:34:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:34:57 INFO] incremented W scene to 85 completed views
[Sequencer 04:34:57 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:34:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:34:57 INFO] incremented to [AERI set: name X85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:34:57 INFO] W85.SIG(18)
[sigmove 04:34:57 DEBUG] transformed W85Ma.SPC -> W85MA.SPC
[sigmove 04:34:57 DEBUG] transformed W85Mb.SPC -> W85MB.SPC
[sigmove 04:34:57 DEBUG] transformed W85Mc.SPC -> W85MC.SPC
[sigmove 04:34:57 DEBUG] transformed W85Md.SPC -> W85MD.SPC
[sigmove 04:34:57 DEBUG] transformed W85Me.SPC -> W85ME.SPC
[sigmove 04:34:57 DEBUG] transformed W85Mf.SPC -> W85MF.SPC
[Status 04:34:57 INFO] data for W85 transferred to science data processing
[Tidy 04:34:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:34:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:34:57 INFO] resetting WatchDogTimer
[Status 04:34:57 INFO] Starting Set [AERI set: name X85, 6 scans, 0 angle, D16300 command]
[Ingest 04:34:57 INFO] Sending XML status message
[Status 04:34:57 INFO] Mirror angle: 0
[Mirror 04:34:57 INFO] rotating to position X
[Status 04:34:57 INFO] .SET file for ACQ96 ready
[Ingest 04:34:57 INFO] Starting acquisition
[Status 04:34:58 INFO] reading housekeeping
[Status 04:35:15 INFO] acquire complete
[Status 04:35:16 INFO] writing housekeeping
[Sequencer 04:35:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:35:16 INFO] incremented X scene to 85 completed views
[Sequencer 04:35:16 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:35:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:35:16 INFO] incremented to [AERI set: name Y85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:35:16 INFO] X85.SIG(18)
[sigmove 04:35:16 DEBUG] transformed X85Ma.SPC -> X85MA.SPC
[sigmove 04:35:16 DEBUG] transformed X85Mb.SPC -> X85MB.SPC
[sigmove 04:35:16 DEBUG] transformed X85Mc.SPC -> X85MC.SPC
[sigmove 04:35:16 DEBUG] transformed X85Md.SPC -> X85MD.SPC
[sigmove 04:35:16 DEBUG] transformed X85Me.SPC -> X85ME.SPC
[sigmove 04:35:16 DEBUG] transformed X85Mf.SPC -> X85MF.SPC
[Status 04:35:16 INFO] data for X85 transferred to science data processing
[Tidy 04:35:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:35:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:35:16 INFO] resetting WatchDogTimer
[Status 04:35:16 INFO] Starting Set [AERI set: name Y85, 6 scans, 0 angle, D16300 command]
[Ingest 04:35:16 INFO] Sending XML status message
[Status 04:35:16 INFO] Mirror angle: 0
[Mirror 04:35:16 INFO] rotating to position Y
[Status 04:35:16 INFO] .SET file for ACQ96 ready
[Ingest 04:35:16 INFO] Starting acquisition
[Status 04:35:17 INFO] reading housekeeping
[Status 04:35:34 INFO] acquire complete
[Status 04:35:35 INFO] writing housekeeping
[Sequencer 04:35:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:35:35 INFO] incremented Y scene to 85 completed views
[Sequencer 04:35:35 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:35:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:35:35 INFO] incremented to [AERI set: name Z85, 6 scans, 0 angle, D16300 command] set
[sigmove 04:35:35 INFO] Y85.SIG(18)
[sigmove 04:35:35 DEBUG] transformed Y85Ma.SPC -> Y85MA.SPC
[sigmove 04:35:35 DEBUG] transformed Y85Mb.SPC -> Y85MB.SPC
[sigmove 04:35:35 DEBUG] transformed Y85Mc.SPC -> Y85MC.SPC
[sigmove 04:35:35 DEBUG] transformed Y85Md.SPC -> Y85MD.SPC
[sigmove 04:35:35 DEBUG] transformed Y85Me.SPC -> Y85ME.SPC
[sigmove 04:35:35 DEBUG] transformed Y85Mf.SPC -> Y85MF.SPC
[Status 04:35:35 INFO] data for Y85 transferred to science data processing
[Tidy 04:35:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:35:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:35:35 INFO] resetting WatchDogTimer
[Status 04:35:35 INFO] Starting Set [AERI set: name Z85, 6 scans, 0 angle, D16300 command]
[Ingest 04:35:35 INFO] Sending XML status message
[Status 04:35:35 INFO] Mirror angle: 0
[Mirror 04:35:35 INFO] rotating to position Z
[Status 04:35:35 INFO] .SET file for ACQ96 ready
[Ingest 04:35:36 INFO] Starting acquisition
[Status 04:35:36 INFO] reading housekeeping
[Status 04:35:54 INFO] acquire complete
[Status 04:35:54 INFO] writing housekeeping
[Sequencer 04:35:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:35:54 INFO] incremented Z scene to 85 completed views
[Sequencer 04:35:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:35:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:35:54 INFO] incremented to [AERI set: name A86, 6 scans, 120 angle, D28300 command] set
[sigmove 04:35:54 INFO] Z85.SIG(18)
[sigmove 04:35:54 DEBUG] transformed Z85Ma.SPC -> Z85MA.SPC
[sigmove 04:35:54 DEBUG] transformed Z85Mb.SPC -> Z85MB.SPC
[sigmove 04:35:54 DEBUG] transformed Z85Mc.SPC -> Z85MC.SPC
[sigmove 04:35:54 DEBUG] transformed Z85Md.SPC -> Z85MD.SPC
[sigmove 04:35:54 DEBUG] transformed Z85Me.SPC -> Z85ME.SPC
[sigmove 04:35:54 DEBUG] transformed Z85Mf.SPC -> Z85MF.SPC
[Status 04:35:54 INFO] data for Z85 transferred to science data processing
[Tidy 04:35:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:35:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:35:54 INFO] resetting WatchDogTimer
[Status 04:35:54 INFO] Starting Set [AERI set: name A86, 6 scans, 120 angle, D28300 command]
[Ingest 04:35:54 INFO] Sending XML status message
[Status 04:35:54 INFO] Mirror angle: 120
[Mirror 04:35:54 INFO] rotating to position A
[Status 04:35:56 INFO] .SET file for ACQ96 ready
[Ingest 04:35:56 INFO] Starting acquisition
[Status 04:35:56 INFO] reading housekeeping
[Status 04:36:14 INFO] acquire complete
[Status 04:36:14 INFO] writing housekeeping
[Sequencer 04:36:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:36:14 INFO] incremented A scene to 86 completed views
[Sequencer 04:36:14 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:36:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:36:14 INFO] incremented to [AERI set: name H86, 6 scans, 60 angle, D22500 command] set
[sigmove 04:36:14 INFO] A86.SIG(18)
[sigmove 04:36:14 DEBUG] transformed A86Ma.SPC -> A86MA.SPC
[sigmove 04:36:14 DEBUG] transformed A86Mb.SPC -> A86MB.SPC
[sigmove 04:36:14 DEBUG] transformed A86Mc.SPC -> A86MC.SPC
[sigmove 04:36:14 DEBUG] transformed A86Md.SPC -> A86MD.SPC
[sigmove 04:36:14 DEBUG] transformed A86Me.SPC -> A86ME.SPC
[sigmove 04:36:14 DEBUG] transformed A86Mf.SPC -> A86MF.SPC
[Status 04:36:14 INFO] data for A86 transferred to science data processing
[Tidy 04:36:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:36:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:36:14 INFO] resetting WatchDogTimer
[Status 04:36:14 INFO] Starting Set [AERI set: name H86, 6 scans, 60 angle, D22500 command]
[Ingest 04:36:14 INFO] Sending XML status message
[Status 04:36:14 INFO] Mirror angle: 60
[Mirror 04:36:14 INFO] rotating to position H
[Status 04:36:15 INFO] .SET file for ACQ96 ready
[Ingest 04:36:15 INFO] Starting acquisition
[Status 04:36:16 INFO] reading housekeeping
[Status 04:36:34 INFO] acquire complete
[Status 04:36:34 INFO] writing housekeeping
[Sequencer 04:36:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:36:34 INFO] incremented H scene to 86 completed views
[Sequencer 04:36:34 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:36:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:36:34 INFO] incremented to [AERI set: name S86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:36:34 INFO] H86.SIG(18)
[sigmove 04:36:34 DEBUG] transformed H86Ma.SPC -> H86MA.SPC
[sigmove 04:36:34 DEBUG] transformed H86Mb.SPC -> H86MB.SPC
[sigmove 04:36:34 DEBUG] transformed H86Mc.SPC -> H86MC.SPC
[sigmove 04:36:34 DEBUG] transformed H86Md.SPC -> H86MD.SPC
[sigmove 04:36:34 DEBUG] transformed H86Me.SPC -> H86ME.SPC
[sigmove 04:36:34 DEBUG] transformed H86Mf.SPC -> H86MF.SPC
[Status 04:36:34 INFO] data for H86 transferred to science data processing
[Tidy 04:36:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:36:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:36:34 INFO] resetting WatchDogTimer
[Status 04:36:35 INFO] Starting Set [AERI set: name S86, 6 scans, 0 angle, D16300 command]
[Ingest 04:36:35 INFO] Sending XML status message
[Status 04:36:35 INFO] Mirror angle: 0
[Mirror 04:36:35 INFO] rotating to position S
[Status 04:36:35 INFO] .SET file for ACQ96 ready
[Ingest 04:36:36 INFO] Starting acquisition
[Status 04:36:36 INFO] reading housekeeping
[Status 04:36:54 INFO] acquire complete
[Status 04:36:55 INFO] writing housekeeping
[Sequencer 04:36:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:36:55 INFO] incremented S scene to 86 completed views
[Sequencer 04:36:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:36:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:36:55 INFO] incremented to [AERI set: name T86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:36:55 INFO] S86.SIG(18)
[sigmove 04:36:55 DEBUG] transformed S86Ma.SPC -> S86MA.SPC
[sigmove 04:36:55 DEBUG] transformed S86Mb.SPC -> S86MB.SPC
[sigmove 04:36:55 DEBUG] transformed S86Mc.SPC -> S86MC.SPC
[sigmove 04:36:55 DEBUG] transformed S86Md.SPC -> S86MD.SPC
[sigmove 04:36:55 DEBUG] transformed S86Me.SPC -> S86ME.SPC
[sigmove 04:36:55 DEBUG] transformed S86Mf.SPC -> S86MF.SPC
[Status 04:36:55 INFO] data for S86 transferred to science data processing
[Tidy 04:36:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:36:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:36:55 INFO] resetting WatchDogTimer
[Status 04:36:55 INFO] Starting Set [AERI set: name T86, 6 scans, 0 angle, D16300 command]
[Ingest 04:36:55 INFO] Sending XML status message
[Status 04:36:55 INFO] Mirror angle: 0
[Mirror 04:36:55 INFO] rotating to position T
[Status 04:36:55 INFO] .SET file for ACQ96 ready
[Ingest 04:36:55 INFO] Starting acquisition
[Status 04:36:55 INFO] reading housekeeping
[Status 04:37:13 INFO] acquire complete
[Status 04:37:14 INFO] writing housekeeping
[Sequencer 04:37:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:37:14 INFO] incremented T scene to 86 completed views
[Sequencer 04:37:14 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:37:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:37:14 INFO] incremented to [AERI set: name U86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:37:14 INFO] T86.SIG(18)
[sigmove 04:37:14 DEBUG] transformed T86Ma.SPC -> T86MA.SPC
[sigmove 04:37:14 DEBUG] transformed T86Mb.SPC -> T86MB.SPC
[sigmove 04:37:14 DEBUG] transformed T86Mc.SPC -> T86MC.SPC
[sigmove 04:37:14 DEBUG] transformed T86Md.SPC -> T86MD.SPC
[sigmove 04:37:14 DEBUG] transformed T86Me.SPC -> T86ME.SPC
[sigmove 04:37:14 DEBUG] transformed T86Mf.SPC -> T86MF.SPC
[Status 04:37:14 INFO] data for T86 transferred to science data processing
[Tidy 04:37:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:37:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:37:14 INFO] resetting WatchDogTimer
[Status 04:37:14 INFO] Starting Set [AERI set: name U86, 6 scans, 0 angle, D16300 command]
[Ingest 04:37:14 INFO] Sending XML status message
[Status 04:37:14 INFO] Mirror angle: 0
[Mirror 04:37:14 INFO] rotating to position U
[Status 04:37:14 INFO] .SET file for ACQ96 ready
[Ingest 04:37:14 INFO] Starting acquisition
[Status 04:37:14 INFO] reading housekeeping
[Status 04:37:32 INFO] acquire complete
[Status 04:37:33 INFO] writing housekeeping
[Sequencer 04:37:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:37:33 INFO] incremented U scene to 86 completed views
[Sequencer 04:37:33 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:37:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:37:33 INFO] incremented to [AERI set: name V86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:37:33 INFO] U86.SIG(18)
[sigmove 04:37:33 DEBUG] transformed U86Ma.SPC -> U86MA.SPC
[sigmove 04:37:33 DEBUG] transformed U86Mb.SPC -> U86MB.SPC
[sigmove 04:37:33 DEBUG] transformed U86Mc.SPC -> U86MC.SPC
[sigmove 04:37:33 DEBUG] transformed U86Md.SPC -> U86MD.SPC
[sigmove 04:37:33 DEBUG] transformed U86Me.SPC -> U86ME.SPC
[sigmove 04:37:33 DEBUG] transformed U86Mf.SPC -> U86MF.SPC
[Status 04:37:33 INFO] data for U86 transferred to science data processing
[Tidy 04:37:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:37:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:37:33 INFO] resetting WatchDogTimer
[Status 04:37:33 INFO] Starting Set [AERI set: name V86, 6 scans, 0 angle, D16300 command]
[Ingest 04:37:33 INFO] Sending XML status message
[Status 04:37:33 INFO] Mirror angle: 0
[Mirror 04:37:33 INFO] rotating to position V
[Status 04:37:33 INFO] .SET file for ACQ96 ready
[Ingest 04:37:33 INFO] Starting acquisition
[Status 04:37:34 INFO] reading housekeeping
[Status 04:37:51 INFO] acquire complete
[Status 04:37:52 INFO] writing housekeeping
[Sequencer 04:37:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:37:52 INFO] incremented V scene to 86 completed views
[Sequencer 04:37:52 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:37:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:37:52 INFO] incremented to [AERI set: name W86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:37:52 INFO] V86.SIG(18)
[sigmove 04:37:52 DEBUG] transformed V86Ma.SPC -> V86MA.SPC
[sigmove 04:37:52 DEBUG] transformed V86Mb.SPC -> V86MB.SPC
[sigmove 04:37:52 DEBUG] transformed V86Mc.SPC -> V86MC.SPC
[sigmove 04:37:52 DEBUG] transformed V86Md.SPC -> V86MD.SPC
[sigmove 04:37:52 DEBUG] transformed V86Me.SPC -> V86ME.SPC
[sigmove 04:37:52 DEBUG] transformed V86Mf.SPC -> V86MF.SPC
[Status 04:37:52 INFO] data for V86 transferred to science data processing
[Tidy 04:37:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:37:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:37:52 INFO] resetting WatchDogTimer
[Status 04:37:52 INFO] Starting Set [AERI set: name W86, 6 scans, 0 angle, D16300 command]
[Ingest 04:37:52 INFO] Sending XML status message
[Status 04:37:52 INFO] Mirror angle: 0
[Mirror 04:37:52 INFO] rotating to position W
[Status 04:37:52 INFO] .SET file for ACQ96 ready
[Ingest 04:37:53 INFO] Starting acquisition
[Status 04:37:53 INFO] reading housekeeping
[Status 04:38:10 INFO] acquire complete
[Status 04:38:11 INFO] writing housekeeping
[Sequencer 04:38:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:38:11 INFO] incremented W scene to 86 completed views
[Sequencer 04:38:11 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:38:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:38:11 INFO] incremented to [AERI set: name X86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:38:11 INFO] W86.SIG(18)
[sigmove 04:38:11 DEBUG] transformed W86Ma.SPC -> W86MA.SPC
[sigmove 04:38:11 DEBUG] transformed W86Mb.SPC -> W86MB.SPC
[sigmove 04:38:11 DEBUG] transformed W86Mc.SPC -> W86MC.SPC
[sigmove 04:38:11 DEBUG] transformed W86Md.SPC -> W86MD.SPC
[sigmove 04:38:11 DEBUG] transformed W86Me.SPC -> W86ME.SPC
[sigmove 04:38:11 DEBUG] transformed W86Mf.SPC -> W86MF.SPC
[Status 04:38:11 INFO] data for W86 transferred to science data processing
[Tidy 04:38:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:38:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:38:11 INFO] resetting WatchDogTimer
[Status 04:38:11 INFO] Starting Set [AERI set: name X86, 6 scans, 0 angle, D16300 command]
[Ingest 04:38:11 INFO] Sending XML status message
[Status 04:38:11 INFO] Mirror angle: 0
[Mirror 04:38:11 INFO] rotating to position X
[Status 04:38:11 INFO] .SET file for ACQ96 ready
[Ingest 04:38:12 INFO] Starting acquisition
[Status 04:38:12 INFO] reading housekeeping
[Status 04:38:30 INFO] acquire complete
[Status 04:38:30 INFO] writing housekeeping
[Sequencer 04:38:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:38:30 INFO] incremented X scene to 86 completed views
[Sequencer 04:38:30 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:38:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:38:30 INFO] incremented to [AERI set: name Y86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:38:30 INFO] X86.SIG(18)
[sigmove 04:38:30 DEBUG] transformed X86Ma.SPC -> X86MA.SPC
[sigmove 04:38:30 DEBUG] transformed X86Mb.SPC -> X86MB.SPC
[sigmove 04:38:30 DEBUG] transformed X86Mc.SPC -> X86MC.SPC
[sigmove 04:38:30 DEBUG] transformed X86Md.SPC -> X86MD.SPC
[sigmove 04:38:30 DEBUG] transformed X86Me.SPC -> X86ME.SPC
[sigmove 04:38:30 DEBUG] transformed X86Mf.SPC -> X86MF.SPC
[Status 04:38:30 INFO] data for X86 transferred to science data processing
[Tidy 04:38:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:38:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:38:30 INFO] resetting WatchDogTimer
[Status 04:38:30 INFO] Starting Set [AERI set: name Y86, 6 scans, 0 angle, D16300 command]
[Ingest 04:38:30 INFO] Sending XML status message
[Status 04:38:30 INFO] Mirror angle: 0
[Mirror 04:38:30 INFO] rotating to position Y
[Status 04:38:31 INFO] .SET file for ACQ96 ready
[Ingest 04:38:31 INFO] Starting acquisition
[Status 04:38:31 INFO] reading housekeeping
[Status 04:38:49 INFO] acquire complete
[Status 04:38:49 INFO] writing housekeeping
[Sequencer 04:38:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:38:49 INFO] incremented Y scene to 86 completed views
[Sequencer 04:38:49 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:38:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:38:49 INFO] incremented to [AERI set: name Z86, 6 scans, 0 angle, D16300 command] set
[sigmove 04:38:49 INFO] Y86.SIG(18)
[sigmove 04:38:49 DEBUG] transformed Y86Ma.SPC -> Y86MA.SPC
[sigmove 04:38:49 DEBUG] transformed Y86Mb.SPC -> Y86MB.SPC
[sigmove 04:38:49 DEBUG] transformed Y86Mc.SPC -> Y86MC.SPC
[sigmove 04:38:49 DEBUG] transformed Y86Md.SPC -> Y86MD.SPC
[sigmove 04:38:49 DEBUG] transformed Y86Me.SPC -> Y86ME.SPC
[sigmove 04:38:49 DEBUG] transformed Y86Mf.SPC -> Y86MF.SPC
[Status 04:38:49 INFO] data for Y86 transferred to science data processing
[Tidy 04:38:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:38:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:38:49 INFO] resetting WatchDogTimer
[Status 04:38:49 INFO] Starting Set [AERI set: name Z86, 6 scans, 0 angle, D16300 command]
[Ingest 04:38:49 INFO] Sending XML status message
[Status 04:38:49 INFO] Mirror angle: 0
[Mirror 04:38:49 INFO] rotating to position Z
[Status 04:38:50 INFO] .SET file for ACQ96 ready
[Ingest 04:38:50 INFO] Starting acquisition
[Status 04:38:50 INFO] reading housekeeping
[Status 04:39:08 INFO] acquire complete
[Status 04:39:08 INFO] writing housekeeping
[Sequencer 04:39:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:39:08 INFO] incremented Z scene to 86 completed views
[Sequencer 04:39:08 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:39:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:39:08 INFO] incremented to [AERI set: name H87, 6 scans, 60 angle, D22500 command] set
[sigmove 04:39:08 INFO] Z86.SIG(18)
[sigmove 04:39:08 DEBUG] transformed Z86Ma.SPC -> Z86MA.SPC
[sigmove 04:39:08 DEBUG] transformed Z86Mb.SPC -> Z86MB.SPC
[sigmove 04:39:08 DEBUG] transformed Z86Mc.SPC -> Z86MC.SPC
[sigmove 04:39:08 DEBUG] transformed Z86Md.SPC -> Z86MD.SPC
[sigmove 04:39:08 DEBUG] transformed Z86Me.SPC -> Z86ME.SPC
[sigmove 04:39:08 DEBUG] transformed Z86Mf.SPC -> Z86MF.SPC
[Status 04:39:08 INFO] data for Z86 transferred to science data processing
[Tidy 04:39:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:39:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:39:08 INFO] resetting WatchDogTimer
[Status 04:39:08 INFO] Starting Set [AERI set: name H87, 6 scans, 60 angle, D22500 command]
[Ingest 04:39:08 INFO] Sending XML status message
[Status 04:39:08 INFO] Mirror angle: 60
[Mirror 04:39:09 INFO] rotating to position H
[Status 04:39:09 INFO] .SET file for ACQ96 ready
[Ingest 04:39:09 INFO] Starting acquisition
[Status 04:39:10 INFO] reading housekeeping
[Status 04:39:28 INFO] acquire complete
[Status 04:39:28 INFO] writing housekeeping
[Sequencer 04:39:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:39:28 INFO] incremented H scene to 87 completed views
[Sequencer 04:39:28 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:39:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:39:28 INFO] incremented to [AERI set: name A87, 6 scans, 120 angle, D28300 command] set
[sigmove 04:39:28 INFO] H87.SIG(18)
[sigmove 04:39:28 DEBUG] transformed H87Ma.SPC -> H87MA.SPC
[sigmove 04:39:28 DEBUG] transformed H87Mb.SPC -> H87MB.SPC
[sigmove 04:39:28 DEBUG] transformed H87Mc.SPC -> H87MC.SPC
[sigmove 04:39:28 DEBUG] transformed H87Md.SPC -> H87MD.SPC
[sigmove 04:39:28 DEBUG] transformed H87Me.SPC -> H87ME.SPC
[sigmove 04:39:28 DEBUG] transformed H87Mf.SPC -> H87MF.SPC
[Status 04:39:28 INFO] data for H87 transferred to science data processing
[Tidy 04:39:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:39:28 INFO] A85.FIN(19),H85.FIN(19),S85.FIN(19),T85.FIN(19),U85.FIN(19),V85.FIN(19),W85.FIN(19),X85.FIN(19),Y85.FIN(19),Z85.FIN(19),A86.FIN(19),H86.FIN(19),S86.FIN(19),T86.FIN(19),U86.FIN(19),V86.FIN(19),W86.FIN(19),X86.FIN(19),Y86.FIN(19),Z86.FIN(19)
[sigmove 04:39:28 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:39:28 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:39:30 DEBUG] done zipping
[WatchDog 04:39:30 INFO] resetting WatchDogTimer
[Status 04:39:30 INFO] Starting Set [AERI set: name A87, 6 scans, 120 angle, D28300 command]
[Ingest 04:39:30 INFO] Sending XML status message
[Status 04:39:30 INFO] Mirror angle: 120
[Mirror 04:39:31 INFO] rotating to position A
[Status 04:39:31 INFO] .SET file for ACQ96 ready
[Ingest 04:39:32 INFO] Starting acquisition
[Status 04:39:32 INFO] reading housekeeping
[Status 04:39:49 INFO] acquire complete
[Status 04:39:50 INFO] writing housekeeping
[Sequencer 04:39:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:39:50 INFO] incremented A scene to 87 completed views
[Sequencer 04:39:50 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:39:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:39:50 INFO] incremented to [AERI set: name S87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:39:50 INFO] A87.SIG(18)
[sigmove 04:39:50 DEBUG] transformed A87Ma.SPC -> A87MA.SPC
[sigmove 04:39:50 DEBUG] transformed A87Mb.SPC -> A87MB.SPC
[sigmove 04:39:50 DEBUG] transformed A87Mc.SPC -> A87MC.SPC
[sigmove 04:39:50 DEBUG] transformed A87Md.SPC -> A87MD.SPC
[sigmove 04:39:50 DEBUG] transformed A87Me.SPC -> A87ME.SPC
[sigmove 04:39:50 DEBUG] transformed A87Mf.SPC -> A87MF.SPC
[Status 04:39:50 INFO] data for A87 transferred to science data processing
[Tidy 04:39:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:39:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:39:50 INFO] resetting WatchDogTimer
[Status 04:39:50 INFO] Starting Set [AERI set: name S87, 6 scans, 0 angle, D16300 command]
[Ingest 04:39:50 INFO] Sending XML status message
[Status 04:39:50 INFO] Mirror angle: 0
[Mirror 04:39:50 INFO] rotating to position S
[Status 04:39:51 INFO] .SET file for ACQ96 ready
[Ingest 04:39:51 INFO] Starting acquisition
[Status 04:39:52 INFO] reading housekeeping
[Status 04:40:09 INFO] acquire complete
[Status 04:40:10 INFO] writing housekeeping
[Sequencer 04:40:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:40:10 INFO] incremented S scene to 87 completed views
[Sequencer 04:40:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:40:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:40:10 INFO] incremented to [AERI set: name T87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:40:10 INFO] S87.SIG(18)
[sigmove 04:40:10 DEBUG] transformed S87Ma.SPC -> S87MA.SPC
[sigmove 04:40:10 DEBUG] transformed S87Mb.SPC -> S87MB.SPC
[sigmove 04:40:10 DEBUG] transformed S87Mc.SPC -> S87MC.SPC
[sigmove 04:40:10 DEBUG] transformed S87Md.SPC -> S87MD.SPC
[sigmove 04:40:10 DEBUG] transformed S87Me.SPC -> S87ME.SPC
[sigmove 04:40:10 DEBUG] transformed S87Mf.SPC -> S87MF.SPC
[Status 04:40:10 INFO] data for S87 transferred to science data processing
[Tidy 04:40:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:40:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:40:10 INFO] resetting WatchDogTimer
[Status 04:40:10 INFO] Starting Set [AERI set: name T87, 6 scans, 0 angle, D16300 command]
[Ingest 04:40:10 INFO] Sending XML status message
[Status 04:40:10 INFO] Mirror angle: 0
[Mirror 04:40:10 INFO] rotating to position T
[Status 04:40:10 INFO] .SET file for ACQ96 ready
[Ingest 04:40:11 INFO] Starting acquisition
[Status 04:40:11 INFO] reading housekeeping
[Status 04:40:29 INFO] acquire complete
[Status 04:40:29 INFO] writing housekeeping
[Sequencer 04:40:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:40:29 INFO] incremented T scene to 87 completed views
[Sequencer 04:40:29 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:40:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:40:29 INFO] incremented to [AERI set: name U87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:40:29 INFO] T87.SIG(18)
[sigmove 04:40:29 DEBUG] transformed T87Ma.SPC -> T87MA.SPC
[sigmove 04:40:29 DEBUG] transformed T87Mb.SPC -> T87MB.SPC
[sigmove 04:40:29 DEBUG] transformed T87Mc.SPC -> T87MC.SPC
[sigmove 04:40:29 DEBUG] transformed T87Md.SPC -> T87MD.SPC
[sigmove 04:40:29 DEBUG] transformed T87Me.SPC -> T87ME.SPC
[sigmove 04:40:29 DEBUG] transformed T87Mf.SPC -> T87MF.SPC
[Status 04:40:29 INFO] data for T87 transferred to science data processing
[Tidy 04:40:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:40:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:40:29 INFO] resetting WatchDogTimer
[Status 04:40:29 INFO] Starting Set [AERI set: name U87, 6 scans, 0 angle, D16300 command]
[Ingest 04:40:29 INFO] Sending XML status message
[Status 04:40:29 INFO] Mirror angle: 0
[Mirror 04:40:29 INFO] rotating to position U
[Status 04:40:30 INFO] .SET file for ACQ96 ready
[Ingest 04:40:30 INFO] Starting acquisition
[Status 04:40:30 INFO] reading housekeeping
[Status 04:40:48 INFO] acquire complete
[Status 04:40:48 INFO] writing housekeeping
[Sequencer 04:40:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:40:48 INFO] incremented U scene to 87 completed views
[Sequencer 04:40:48 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:40:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:40:48 INFO] incremented to [AERI set: name V87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:40:48 INFO] U87.SIG(18)
[sigmove 04:40:48 DEBUG] transformed U87Ma.SPC -> U87MA.SPC
[sigmove 04:40:48 DEBUG] transformed U87Mb.SPC -> U87MB.SPC
[sigmove 04:40:48 DEBUG] transformed U87Mc.SPC -> U87MC.SPC
[sigmove 04:40:48 DEBUG] transformed U87Md.SPC -> U87MD.SPC
[sigmove 04:40:48 DEBUG] transformed U87Me.SPC -> U87ME.SPC
[sigmove 04:40:48 DEBUG] transformed U87Mf.SPC -> U87MF.SPC
[Status 04:40:48 INFO] data for U87 transferred to science data processing
[Tidy 04:40:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:40:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:40:48 INFO] resetting WatchDogTimer
[Status 04:40:49 INFO] Starting Set [AERI set: name V87, 6 scans, 0 angle, D16300 command]
[Ingest 04:40:49 INFO] Sending XML status message
[Status 04:40:49 INFO] Mirror angle: 0
[Mirror 04:40:49 INFO] rotating to position V
[Status 04:40:49 INFO] .SET file for ACQ96 ready
[Ingest 04:40:49 INFO] Starting acquisition
[Status 04:40:49 INFO] reading housekeeping
[Status 04:41:07 INFO] acquire complete
[Status 04:41:07 INFO] writing housekeeping
[Sequencer 04:41:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:41:07 INFO] incremented V scene to 87 completed views
[Sequencer 04:41:07 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:41:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:41:07 INFO] incremented to [AERI set: name W87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:41:07 INFO] V87.SIG(18)
[sigmove 04:41:07 DEBUG] transformed V87Ma.SPC -> V87MA.SPC
[sigmove 04:41:07 DEBUG] transformed V87Mb.SPC -> V87MB.SPC
[sigmove 04:41:07 DEBUG] transformed V87Mc.SPC -> V87MC.SPC
[sigmove 04:41:07 DEBUG] transformed V87Md.SPC -> V87MD.SPC
[sigmove 04:41:07 DEBUG] transformed V87Me.SPC -> V87ME.SPC
[sigmove 04:41:07 DEBUG] transformed V87Mf.SPC -> V87MF.SPC
[Status 04:41:07 INFO] data for V87 transferred to science data processing
[Tidy 04:41:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:41:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:41:07 INFO] resetting WatchDogTimer
[Status 04:41:08 INFO] Starting Set [AERI set: name W87, 6 scans, 0 angle, D16300 command]
[Ingest 04:41:08 INFO] Sending XML status message
[Status 04:41:08 INFO] Mirror angle: 0
[Mirror 04:41:08 INFO] rotating to position W
[Status 04:41:08 INFO] .SET file for ACQ96 ready
[Ingest 04:41:08 INFO] Starting acquisition
[Status 04:41:08 INFO] reading housekeeping
[Status 04:41:26 INFO] acquire complete
[Status 04:41:26 INFO] writing housekeeping
[Sequencer 04:41:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:41:26 INFO] incremented W scene to 87 completed views
[Sequencer 04:41:26 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:41:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:41:26 INFO] incremented to [AERI set: name X87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:41:26 INFO] W87.SIG(18)
[sigmove 04:41:26 DEBUG] transformed W87Ma.SPC -> W87MA.SPC
[sigmove 04:41:26 DEBUG] transformed W87Mb.SPC -> W87MB.SPC
[sigmove 04:41:26 DEBUG] transformed W87Mc.SPC -> W87MC.SPC
[sigmove 04:41:26 DEBUG] transformed W87Md.SPC -> W87MD.SPC
[sigmove 04:41:26 DEBUG] transformed W87Me.SPC -> W87ME.SPC
[sigmove 04:41:26 DEBUG] transformed W87Mf.SPC -> W87MF.SPC
[Status 04:41:26 INFO] data for W87 transferred to science data processing
[Tidy 04:41:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:41:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:41:26 INFO] resetting WatchDogTimer
[Status 04:41:26 INFO] Starting Set [AERI set: name X87, 6 scans, 0 angle, D16300 command]
[Ingest 04:41:26 INFO] Sending XML status message
[Status 04:41:26 INFO] Mirror angle: 0
[Mirror 04:41:27 INFO] rotating to position X
[Status 04:41:27 INFO] .SET file for ACQ96 ready
[Ingest 04:41:27 INFO] Starting acquisition
[Status 04:41:27 INFO] reading housekeeping
[Status 04:41:45 INFO] acquire complete
[Status 04:41:45 INFO] writing housekeeping
[Sequencer 04:41:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:41:45 INFO] incremented X scene to 87 completed views
[Sequencer 04:41:45 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:41:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:41:45 INFO] incremented to [AERI set: name Y87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:41:45 INFO] X87.SIG(18)
[sigmove 04:41:45 DEBUG] transformed X87Ma.SPC -> X87MA.SPC
[sigmove 04:41:45 DEBUG] transformed X87Mb.SPC -> X87MB.SPC
[sigmove 04:41:45 DEBUG] transformed X87Mc.SPC -> X87MC.SPC
[sigmove 04:41:45 DEBUG] transformed X87Md.SPC -> X87MD.SPC
[sigmove 04:41:45 DEBUG] transformed X87Me.SPC -> X87ME.SPC
[sigmove 04:41:45 DEBUG] transformed X87Mf.SPC -> X87MF.SPC
[Status 04:41:45 INFO] data for X87 transferred to science data processing
[Tidy 04:41:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:41:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:41:45 INFO] resetting WatchDogTimer
[Status 04:41:46 INFO] Starting Set [AERI set: name Y87, 6 scans, 0 angle, D16300 command]
[Ingest 04:41:46 INFO] Sending XML status message
[Status 04:41:46 INFO] Mirror angle: 0
[Mirror 04:41:46 INFO] rotating to position Y
[Status 04:41:46 INFO] .SET file for ACQ96 ready
[Ingest 04:41:46 INFO] Starting acquisition
[Status 04:41:46 INFO] reading housekeeping
[Status 04:42:04 INFO] acquire complete
[Status 04:42:04 INFO] writing housekeeping
[Sequencer 04:42:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:42:04 INFO] incremented Y scene to 87 completed views
[Sequencer 04:42:04 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:42:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:42:04 INFO] incremented to [AERI set: name Z87, 6 scans, 0 angle, D16300 command] set
[sigmove 04:42:04 INFO] Y87.SIG(18)
[sigmove 04:42:04 DEBUG] transformed Y87Ma.SPC -> Y87MA.SPC
[sigmove 04:42:04 DEBUG] transformed Y87Mb.SPC -> Y87MB.SPC
[sigmove 04:42:04 DEBUG] transformed Y87Mc.SPC -> Y87MC.SPC
[sigmove 04:42:04 DEBUG] transformed Y87Md.SPC -> Y87MD.SPC
[sigmove 04:42:04 DEBUG] transformed Y87Me.SPC -> Y87ME.SPC
[sigmove 04:42:04 DEBUG] transformed Y87Mf.SPC -> Y87MF.SPC
[Status 04:42:04 INFO] data for Y87 transferred to science data processing
[Tidy 04:42:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:42:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:42:04 INFO] resetting WatchDogTimer
[Status 04:42:05 INFO] Starting Set [AERI set: name Z87, 6 scans, 0 angle, D16300 command]
[Ingest 04:42:05 INFO] Sending XML status message
[Status 04:42:05 INFO] Mirror angle: 0
[Mirror 04:42:05 INFO] rotating to position Z
[Status 04:42:05 INFO] .SET file for ACQ96 ready
[Ingest 04:42:05 INFO] Starting acquisition
[Status 04:42:05 INFO] reading housekeeping
[Status 04:42:23 INFO] acquire complete
[Status 04:42:24 INFO] writing housekeeping
[Sequencer 04:42:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:42:24 INFO] incremented Z scene to 87 completed views
[Sequencer 04:42:24 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:42:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:42:24 INFO] incremented to [AERI set: name A88, 6 scans, 120 angle, D28300 command] set
[sigmove 04:42:24 INFO] Z87.SIG(18)
[sigmove 04:42:24 DEBUG] transformed Z87Ma.SPC -> Z87MA.SPC
[sigmove 04:42:24 DEBUG] transformed Z87Mb.SPC -> Z87MB.SPC
[sigmove 04:42:24 DEBUG] transformed Z87Mc.SPC -> Z87MC.SPC
[sigmove 04:42:24 DEBUG] transformed Z87Md.SPC -> Z87MD.SPC
[sigmove 04:42:24 DEBUG] transformed Z87Me.SPC -> Z87ME.SPC
[sigmove 04:42:24 DEBUG] transformed Z87Mf.SPC -> Z87MF.SPC
[Status 04:42:24 INFO] data for Z87 transferred to science data processing
[Tidy 04:42:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:42:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:42:24 INFO] resetting WatchDogTimer
[Status 04:42:24 INFO] Starting Set [AERI set: name A88, 6 scans, 120 angle, D28300 command]
[Ingest 04:42:24 INFO] Sending XML status message
[Status 04:42:24 INFO] Mirror angle: 120
[Mirror 04:42:24 INFO] rotating to position A
[Status 04:42:25 INFO] .SET file for ACQ96 ready
[Ingest 04:42:25 INFO] Starting acquisition
[Status 04:42:25 INFO] reading housekeeping
[Status 04:42:43 INFO] acquire complete
[Status 04:42:44 INFO] writing housekeeping
[Sequencer 04:42:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:42:44 INFO] incremented A scene to 88 completed views
[Sequencer 04:42:44 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:42:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:42:44 INFO] incremented to [AERI set: name H88, 6 scans, 60 angle, D22500 command] set
[sigmove 04:42:44 INFO] A88.SIG(18)
[sigmove 04:42:44 DEBUG] transformed A88Ma.SPC -> A88MA.SPC
[sigmove 04:42:44 DEBUG] transformed A88Mb.SPC -> A88MB.SPC
[sigmove 04:42:44 DEBUG] transformed A88Mc.SPC -> A88MC.SPC
[sigmove 04:42:44 DEBUG] transformed A88Md.SPC -> A88MD.SPC
[sigmove 04:42:44 DEBUG] transformed A88Me.SPC -> A88ME.SPC
[sigmove 04:42:44 DEBUG] transformed A88Mf.SPC -> A88MF.SPC
[Status 04:42:44 INFO] data for A88 transferred to science data processing
[Tidy 04:42:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:42:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:42:44 INFO] resetting WatchDogTimer
[Status 04:42:44 INFO] Starting Set [AERI set: name H88, 6 scans, 60 angle, D22500 command]
[Ingest 04:42:44 INFO] Sending XML status message
[Status 04:42:44 INFO] Mirror angle: 60
[Mirror 04:42:44 INFO] rotating to position H
[Status 04:42:45 INFO] .SET file for ACQ96 ready
[Ingest 04:42:45 INFO] Starting acquisition
[Status 04:42:45 INFO] reading housekeeping
[Status 04:43:03 INFO] acquire complete
[Status 04:43:04 INFO] writing housekeeping
[Sequencer 04:43:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:43:04 INFO] incremented H scene to 88 completed views
[Sequencer 04:43:04 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:43:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:43:04 INFO] incremented to [AERI set: name S88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:43:04 INFO] H88.SIG(18)
[sigmove 04:43:04 DEBUG] transformed H88Ma.SPC -> H88MA.SPC
[sigmove 04:43:04 DEBUG] transformed H88Mb.SPC -> H88MB.SPC
[sigmove 04:43:04 DEBUG] transformed H88Mc.SPC -> H88MC.SPC
[sigmove 04:43:04 DEBUG] transformed H88Md.SPC -> H88MD.SPC
[sigmove 04:43:04 DEBUG] transformed H88Me.SPC -> H88ME.SPC
[sigmove 04:43:04 DEBUG] transformed H88Mf.SPC -> H88MF.SPC
[Status 04:43:04 INFO] data for H88 transferred to science data processing
[Tidy 04:43:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:43:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:43:04 INFO] resetting WatchDogTimer
[Status 04:43:04 INFO] Starting Set [AERI set: name S88, 6 scans, 0 angle, D16300 command]
[Ingest 04:43:04 INFO] Sending XML status message
[Status 04:43:04 INFO] Mirror angle: 0
[Mirror 04:43:04 INFO] rotating to position S
[Status 04:43:05 INFO] .SET file for ACQ96 ready
[Ingest 04:43:05 INFO] Starting acquisition
[Status 04:43:05 INFO] reading housekeeping
[Status 04:43:24 INFO] acquire complete
[Status 04:43:24 INFO] writing housekeeping
[Sequencer 04:43:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:43:24 INFO] incremented S scene to 88 completed views
[Sequencer 04:43:24 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:43:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:43:24 INFO] incremented to [AERI set: name T88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:43:24 INFO] S88.SIG(18)
[sigmove 04:43:24 DEBUG] transformed S88Ma.SPC -> S88MA.SPC
[sigmove 04:43:24 DEBUG] transformed S88Mb.SPC -> S88MB.SPC
[sigmove 04:43:24 DEBUG] transformed S88Mc.SPC -> S88MC.SPC
[sigmove 04:43:24 DEBUG] transformed S88Md.SPC -> S88MD.SPC
[sigmove 04:43:24 DEBUG] transformed S88Me.SPC -> S88ME.SPC
[sigmove 04:43:24 DEBUG] transformed S88Mf.SPC -> S88MF.SPC
[Status 04:43:24 INFO] data for S88 transferred to science data processing
[Tidy 04:43:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:43:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:43:24 INFO] resetting WatchDogTimer
[Status 04:43:24 INFO] Starting Set [AERI set: name T88, 6 scans, 0 angle, D16300 command]
[Ingest 04:43:24 INFO] Sending XML status message
[Status 04:43:24 INFO] Mirror angle: 0
[Mirror 04:43:24 INFO] rotating to position T
[Status 04:43:25 INFO] .SET file for ACQ96 ready
[Ingest 04:43:25 INFO] Starting acquisition
[Status 04:43:25 INFO] reading housekeeping
[Status 04:43:43 INFO] acquire complete
[Status 04:43:43 INFO] writing housekeeping
[Sequencer 04:43:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:43:43 INFO] incremented T scene to 88 completed views
[Sequencer 04:43:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:43:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:43:43 INFO] incremented to [AERI set: name U88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:43:43 INFO] T88.SIG(18)
[sigmove 04:43:43 DEBUG] transformed T88Ma.SPC -> T88MA.SPC
[sigmove 04:43:43 DEBUG] transformed T88Mb.SPC -> T88MB.SPC
[sigmove 04:43:43 DEBUG] transformed T88Mc.SPC -> T88MC.SPC
[sigmove 04:43:43 DEBUG] transformed T88Md.SPC -> T88MD.SPC
[sigmove 04:43:43 DEBUG] transformed T88Me.SPC -> T88ME.SPC
[sigmove 04:43:43 DEBUG] transformed T88Mf.SPC -> T88MF.SPC
[Status 04:43:43 INFO] data for T88 transferred to science data processing
[Tidy 04:43:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:43:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:43:43 INFO] resetting WatchDogTimer
[Status 04:43:43 INFO] Starting Set [AERI set: name U88, 6 scans, 0 angle, D16300 command]
[Ingest 04:43:43 INFO] Sending XML status message
[Status 04:43:43 INFO] Mirror angle: 0
[Mirror 04:43:44 INFO] rotating to position U
[Status 04:43:44 INFO] .SET file for ACQ96 ready
[Ingest 04:43:44 INFO] Starting acquisition
[Status 04:43:44 INFO] reading housekeeping
[Status 04:44:02 INFO] acquire complete
[Status 04:44:02 INFO] writing housekeeping
[Sequencer 04:44:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:44:02 INFO] incremented U scene to 88 completed views
[Sequencer 04:44:02 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:44:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:44:02 INFO] incremented to [AERI set: name V88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:44:02 INFO] U88.SIG(18)
[sigmove 04:44:02 DEBUG] transformed U88Ma.SPC -> U88MA.SPC
[sigmove 04:44:02 DEBUG] transformed U88Mb.SPC -> U88MB.SPC
[sigmove 04:44:02 DEBUG] transformed U88Mc.SPC -> U88MC.SPC
[sigmove 04:44:02 DEBUG] transformed U88Md.SPC -> U88MD.SPC
[sigmove 04:44:02 DEBUG] transformed U88Me.SPC -> U88ME.SPC
[sigmove 04:44:02 DEBUG] transformed U88Mf.SPC -> U88MF.SPC
[Status 04:44:02 INFO] data for U88 transferred to science data processing
[Tidy 04:44:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:44:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:44:02 INFO] resetting WatchDogTimer
[Status 04:44:02 INFO] Starting Set [AERI set: name V88, 6 scans, 0 angle, D16300 command]
[Ingest 04:44:02 INFO] Sending XML status message
[Status 04:44:02 INFO] Mirror angle: 0
[Mirror 04:44:03 INFO] rotating to position V
[Status 04:44:03 INFO] .SET file for ACQ96 ready
[Ingest 04:44:03 INFO] Starting acquisition
[Status 04:44:03 INFO] reading housekeeping
[Status 04:44:21 INFO] acquire complete
[Status 04:44:21 INFO] writing housekeeping
[Sequencer 04:44:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:44:21 INFO] incremented V scene to 88 completed views
[Sequencer 04:44:21 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:44:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:44:21 INFO] incremented to [AERI set: name W88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:44:21 INFO] V88.SIG(18)
[sigmove 04:44:21 DEBUG] transformed V88Ma.SPC -> V88MA.SPC
[sigmove 04:44:21 DEBUG] transformed V88Mb.SPC -> V88MB.SPC
[sigmove 04:44:21 DEBUG] transformed V88Mc.SPC -> V88MC.SPC
[sigmove 04:44:21 DEBUG] transformed V88Md.SPC -> V88MD.SPC
[sigmove 04:44:21 DEBUG] transformed V88Me.SPC -> V88ME.SPC
[sigmove 04:44:21 DEBUG] transformed V88Mf.SPC -> V88MF.SPC
[Status 04:44:21 INFO] data for V88 transferred to science data processing
[Tidy 04:44:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:44:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:44:21 INFO] resetting WatchDogTimer
[Status 04:44:22 INFO] Starting Set [AERI set: name W88, 6 scans, 0 angle, D16300 command]
[Ingest 04:44:22 INFO] Sending XML status message
[Status 04:44:22 INFO] Mirror angle: 0
[Mirror 04:44:22 INFO] rotating to position W
[Status 04:44:22 INFO] .SET file for ACQ96 ready
[Ingest 04:44:22 INFO] Starting acquisition
[Status 04:44:22 INFO] reading housekeeping
[Status 04:44:40 INFO] acquire complete
[Status 04:44:40 INFO] writing housekeeping
[Sequencer 04:44:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:44:40 INFO] incremented W scene to 88 completed views
[Sequencer 04:44:40 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:44:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:44:40 INFO] incremented to [AERI set: name X88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:44:40 INFO] W88.SIG(18)
[sigmove 04:44:40 DEBUG] transformed W88Ma.SPC -> W88MA.SPC
[sigmove 04:44:40 DEBUG] transformed W88Mb.SPC -> W88MB.SPC
[sigmove 04:44:40 DEBUG] transformed W88Mc.SPC -> W88MC.SPC
[sigmove 04:44:40 DEBUG] transformed W88Md.SPC -> W88MD.SPC
[sigmove 04:44:40 DEBUG] transformed W88Me.SPC -> W88ME.SPC
[sigmove 04:44:40 DEBUG] transformed W88Mf.SPC -> W88MF.SPC
[Status 04:44:40 INFO] data for W88 transferred to science data processing
[Tidy 04:44:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:44:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:44:40 INFO] resetting WatchDogTimer
[Status 04:44:41 INFO] Starting Set [AERI set: name X88, 6 scans, 0 angle, D16300 command]
[Ingest 04:44:41 INFO] Sending XML status message
[Status 04:44:41 INFO] Mirror angle: 0
[Mirror 04:44:41 INFO] rotating to position X
[Status 04:44:41 INFO] .SET file for ACQ96 ready
[Ingest 04:44:41 INFO] Starting acquisition
[Status 04:44:41 INFO] reading housekeeping
[Status 04:44:59 INFO] acquire complete
[Status 04:45:00 INFO] writing housekeeping
[Sequencer 04:45:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:45:00 INFO] incremented X scene to 88 completed views
[Sequencer 04:45:00 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:45:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:45:00 INFO] incremented to [AERI set: name Y88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:45:00 INFO] X88.SIG(18)
[sigmove 04:45:00 DEBUG] transformed X88Ma.SPC -> X88MA.SPC
[sigmove 04:45:00 DEBUG] transformed X88Mb.SPC -> X88MB.SPC
[sigmove 04:45:00 DEBUG] transformed X88Mc.SPC -> X88MC.SPC
[sigmove 04:45:00 DEBUG] transformed X88Md.SPC -> X88MD.SPC
[sigmove 04:45:00 DEBUG] transformed X88Me.SPC -> X88ME.SPC
[sigmove 04:45:00 DEBUG] transformed X88Mf.SPC -> X88MF.SPC
[Status 04:45:00 INFO] data for X88 transferred to science data processing
[Tidy 04:45:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:45:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:45:00 INFO] resetting WatchDogTimer
[Status 04:45:00 INFO] Starting Set [AERI set: name Y88, 6 scans, 0 angle, D16300 command]
[Ingest 04:45:00 INFO] Sending XML status message
[Status 04:45:00 INFO] Mirror angle: 0
[Mirror 04:45:00 INFO] rotating to position Y
[Status 04:45:00 INFO] .SET file for ACQ96 ready
[Ingest 04:45:00 INFO] Starting acquisition
[Status 04:45:00 INFO] reading housekeeping
[Status 04:45:18 INFO] acquire complete
[Status 04:45:19 INFO] writing housekeeping
[Sequencer 04:45:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:45:19 INFO] incremented Y scene to 88 completed views
[Sequencer 04:45:19 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:45:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:45:19 INFO] incremented to [AERI set: name Z88, 6 scans, 0 angle, D16300 command] set
[sigmove 04:45:19 INFO] Y88.SIG(18)
[sigmove 04:45:19 DEBUG] transformed Y88Ma.SPC -> Y88MA.SPC
[sigmove 04:45:19 DEBUG] transformed Y88Mb.SPC -> Y88MB.SPC
[sigmove 04:45:19 DEBUG] transformed Y88Mc.SPC -> Y88MC.SPC
[sigmove 04:45:19 DEBUG] transformed Y88Md.SPC -> Y88MD.SPC
[sigmove 04:45:19 DEBUG] transformed Y88Me.SPC -> Y88ME.SPC
[sigmove 04:45:19 DEBUG] transformed Y88Mf.SPC -> Y88MF.SPC
[Status 04:45:19 INFO] data for Y88 transferred to science data processing
[Tidy 04:45:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:45:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:45:19 INFO] resetting WatchDogTimer
[Status 04:45:19 INFO] Starting Set [AERI set: name Z88, 6 scans, 0 angle, D16300 command]
[Ingest 04:45:19 INFO] Sending XML status message
[Status 04:45:19 INFO] Mirror angle: 0
[Mirror 04:45:19 INFO] rotating to position Z
[Status 04:45:19 INFO] .SET file for ACQ96 ready
[Ingest 04:45:19 INFO] Starting acquisition
[Status 04:45:19 INFO] reading housekeeping
[Status 04:45:37 INFO] acquire complete
[Status 04:45:38 INFO] writing housekeeping
[Sequencer 04:45:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:45:38 INFO] incremented Z scene to 88 completed views
[Sequencer 04:45:38 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:45:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:45:38 INFO] incremented to [AERI set: name H89, 6 scans, 60 angle, D22500 command] set
[sigmove 04:45:38 INFO] Z88.SIG(18)
[sigmove 04:45:38 DEBUG] transformed Z88Ma.SPC -> Z88MA.SPC
[sigmove 04:45:38 DEBUG] transformed Z88Mb.SPC -> Z88MB.SPC
[sigmove 04:45:38 DEBUG] transformed Z88Mc.SPC -> Z88MC.SPC
[sigmove 04:45:38 DEBUG] transformed Z88Md.SPC -> Z88MD.SPC
[sigmove 04:45:38 DEBUG] transformed Z88Me.SPC -> Z88ME.SPC
[sigmove 04:45:38 DEBUG] transformed Z88Mf.SPC -> Z88MF.SPC
[Status 04:45:38 INFO] data for Z88 transferred to science data processing
[Tidy 04:45:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:45:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:45:38 INFO] resetting WatchDogTimer
[Status 04:45:38 INFO] Starting Set [AERI set: name H89, 6 scans, 60 angle, D22500 command]
[Ingest 04:45:38 INFO] Sending XML status message
[Status 04:45:38 INFO] Mirror angle: 60
[Mirror 04:45:38 INFO] rotating to position H
[Status 04:45:39 INFO] .SET file for ACQ96 ready
[Ingest 04:45:39 INFO] Starting acquisition
[Status 04:45:39 INFO] reading housekeeping
[Status 04:45:57 INFO] acquire complete
[Status 04:45:58 INFO] writing housekeeping
[Sequencer 04:45:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:45:58 INFO] incremented H scene to 89 completed views
[Sequencer 04:45:58 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:45:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:45:58 INFO] incremented to [AERI set: name A89, 6 scans, 120 angle, D28300 command] set
[sigmove 04:45:58 INFO] H89.SIG(18)
[sigmove 04:45:58 DEBUG] transformed H89Ma.SPC -> H89MA.SPC
[sigmove 04:45:58 DEBUG] transformed H89Mb.SPC -> H89MB.SPC
[sigmove 04:45:58 DEBUG] transformed H89Mc.SPC -> H89MC.SPC
[sigmove 04:45:58 DEBUG] transformed H89Md.SPC -> H89MD.SPC
[sigmove 04:45:58 DEBUG] transformed H89Me.SPC -> H89ME.SPC
[sigmove 04:45:58 DEBUG] transformed H89Mf.SPC -> H89MF.SPC
[Status 04:45:58 INFO] data for H89 transferred to science data processing
[Tidy 04:45:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:45:58 INFO] A87.FIN(19),H87.FIN(19),S87.FIN(19),T87.FIN(19),U87.FIN(19),V87.FIN(19),W87.FIN(19),X87.FIN(19),Y87.FIN(19),Z87.FIN(19),A88.FIN(19),H88.FIN(19),S88.FIN(19),T88.FIN(19),U88.FIN(19),V88.FIN(19),W88.FIN(19),X88.FIN(19),Y88.FIN(19),Z88.FIN(19)
[sigmove 04:45:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:45:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:46:00 DEBUG] done zipping
[WatchDog 04:46:00 INFO] resetting WatchDogTimer
[Status 04:46:00 INFO] Starting Set [AERI set: name A89, 6 scans, 120 angle, D28300 command]
[Ingest 04:46:00 INFO] Sending XML status message
[Status 04:46:00 INFO] Mirror angle: 120
[Mirror 04:46:00 INFO] rotating to position A
[Status 04:46:01 INFO] .SET file for ACQ96 ready
[Ingest 04:46:01 INFO] Starting acquisition
[Status 04:46:01 INFO] reading housekeeping
[Status 04:46:19 INFO] acquire complete
[Status 04:46:19 INFO] writing housekeeping
[Sequencer 04:46:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:46:19 INFO] incremented A scene to 89 completed views
[Sequencer 04:46:19 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:46:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:46:19 INFO] incremented to [AERI set: name S89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:46:19 INFO] A89.SIG(18)
[sigmove 04:46:19 DEBUG] transformed A89Ma.SPC -> A89MA.SPC
[sigmove 04:46:19 DEBUG] transformed A89Mb.SPC -> A89MB.SPC
[sigmove 04:46:19 DEBUG] transformed A89Mc.SPC -> A89MC.SPC
[sigmove 04:46:19 DEBUG] transformed A89Md.SPC -> A89MD.SPC
[sigmove 04:46:19 DEBUG] transformed A89Me.SPC -> A89ME.SPC
[sigmove 04:46:19 DEBUG] transformed A89Mf.SPC -> A89MF.SPC
[Status 04:46:19 INFO] data for A89 transferred to science data processing
[Tidy 04:46:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:46:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:46:19 INFO] resetting WatchDogTimer
[Status 04:46:19 INFO] Starting Set [AERI set: name S89, 6 scans, 0 angle, D16300 command]
[Ingest 04:46:19 INFO] Sending XML status message
[Status 04:46:19 INFO] Mirror angle: 0
[Mirror 04:46:20 INFO] rotating to position S
[Status 04:46:21 INFO] .SET file for ACQ96 ready
[Ingest 04:46:21 INFO] Starting acquisition
[Status 04:46:21 INFO] reading housekeeping
[Status 04:46:39 INFO] acquire complete
[Status 04:46:39 INFO] writing housekeeping
[Sequencer 04:46:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:46:39 INFO] incremented S scene to 89 completed views
[Sequencer 04:46:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:46:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:46:39 INFO] incremented to [AERI set: name T89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:46:39 INFO] S89.SIG(18)
[sigmove 04:46:39 DEBUG] transformed S89Ma.SPC -> S89MA.SPC
[sigmove 04:46:39 DEBUG] transformed S89Mb.SPC -> S89MB.SPC
[sigmove 04:46:39 DEBUG] transformed S89Mc.SPC -> S89MC.SPC
[sigmove 04:46:39 DEBUG] transformed S89Md.SPC -> S89MD.SPC
[sigmove 04:46:39 DEBUG] transformed S89Me.SPC -> S89ME.SPC
[sigmove 04:46:39 DEBUG] transformed S89Mf.SPC -> S89MF.SPC
[Status 04:46:39 INFO] data for S89 transferred to science data processing
[Tidy 04:46:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:46:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:46:39 INFO] resetting WatchDogTimer
[Status 04:46:40 INFO] Starting Set [AERI set: name T89, 6 scans, 0 angle, D16300 command]
[Ingest 04:46:40 INFO] Sending XML status message
[Status 04:46:40 INFO] Mirror angle: 0
[Mirror 04:46:40 INFO] rotating to position T
[Status 04:46:40 INFO] .SET file for ACQ96 ready
[Ingest 04:46:40 INFO] Starting acquisition
[Status 04:46:40 INFO] reading housekeeping
[Status 04:46:58 INFO] acquire complete
[Status 04:46:59 INFO] writing housekeeping
[Sequencer 04:46:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:46:59 INFO] incremented T scene to 89 completed views
[Sequencer 04:46:59 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:46:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:46:59 INFO] incremented to [AERI set: name U89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:46:59 INFO] T89.SIG(18)
[sigmove 04:46:59 DEBUG] transformed T89Ma.SPC -> T89MA.SPC
[sigmove 04:46:59 DEBUG] transformed T89Mb.SPC -> T89MB.SPC
[sigmove 04:46:59 DEBUG] transformed T89Mc.SPC -> T89MC.SPC
[sigmove 04:46:59 DEBUG] transformed T89Md.SPC -> T89MD.SPC
[sigmove 04:46:59 DEBUG] transformed T89Me.SPC -> T89ME.SPC
[sigmove 04:46:59 DEBUG] transformed T89Mf.SPC -> T89MF.SPC
[Status 04:46:59 INFO] data for T89 transferred to science data processing
[Tidy 04:46:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:46:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:46:59 INFO] resetting WatchDogTimer
[Status 04:46:59 INFO] Starting Set [AERI set: name U89, 6 scans, 0 angle, D16300 command]
[Ingest 04:46:59 INFO] Sending XML status message
[Status 04:46:59 INFO] Mirror angle: 0
[Mirror 04:46:59 INFO] rotating to position U
[Status 04:46:59 INFO] .SET file for ACQ96 ready
[Ingest 04:46:59 INFO] Starting acquisition
[Status 04:46:59 INFO] reading housekeeping
[Status 04:47:17 INFO] acquire complete
[Status 04:47:18 INFO] writing housekeeping
[Sequencer 04:47:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:47:18 INFO] incremented U scene to 89 completed views
[Sequencer 04:47:18 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:47:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:47:18 INFO] incremented to [AERI set: name V89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:47:18 INFO] U89.SIG(18)
[sigmove 04:47:18 DEBUG] transformed U89Ma.SPC -> U89MA.SPC
[sigmove 04:47:18 DEBUG] transformed U89Mb.SPC -> U89MB.SPC
[sigmove 04:47:18 DEBUG] transformed U89Mc.SPC -> U89MC.SPC
[sigmove 04:47:18 DEBUG] transformed U89Md.SPC -> U89MD.SPC
[sigmove 04:47:18 DEBUG] transformed U89Me.SPC -> U89ME.SPC
[sigmove 04:47:18 DEBUG] transformed U89Mf.SPC -> U89MF.SPC
[Status 04:47:18 INFO] data for U89 transferred to science data processing
[Tidy 04:47:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:47:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:47:18 INFO] resetting WatchDogTimer
[Status 04:47:18 INFO] Starting Set [AERI set: name V89, 6 scans, 0 angle, D16300 command]
[Ingest 04:47:18 INFO] Sending XML status message
[Status 04:47:18 INFO] Mirror angle: 0
[Mirror 04:47:18 INFO] rotating to position V
[Status 04:47:18 INFO] .SET file for ACQ96 ready
[Ingest 04:47:18 INFO] Starting acquisition
[Status 04:47:18 INFO] reading housekeeping
[Status 04:47:36 INFO] acquire complete
[Status 04:47:37 INFO] writing housekeeping
[Sequencer 04:47:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:47:37 INFO] incremented V scene to 89 completed views
[Sequencer 04:47:37 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:47:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:47:37 INFO] incremented to [AERI set: name W89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:47:37 INFO] V89.SIG(18)
[sigmove 04:47:37 DEBUG] transformed V89Ma.SPC -> V89MA.SPC
[sigmove 04:47:37 DEBUG] transformed V89Mb.SPC -> V89MB.SPC
[sigmove 04:47:37 DEBUG] transformed V89Mc.SPC -> V89MC.SPC
[sigmove 04:47:37 DEBUG] transformed V89Md.SPC -> V89MD.SPC
[sigmove 04:47:37 DEBUG] transformed V89Me.SPC -> V89ME.SPC
[sigmove 04:47:37 DEBUG] transformed V89Mf.SPC -> V89MF.SPC
[Status 04:47:37 INFO] data for V89 transferred to science data processing
[Tidy 04:47:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:47:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:47:37 INFO] resetting WatchDogTimer
[Status 04:47:37 INFO] Starting Set [AERI set: name W89, 6 scans, 0 angle, D16300 command]
[Ingest 04:47:37 INFO] Sending XML status message
[Status 04:47:37 INFO] Mirror angle: 0
[Mirror 04:47:37 INFO] rotating to position W
[Status 04:47:37 INFO] .SET file for ACQ96 ready
[Ingest 04:47:37 INFO] Starting acquisition
[Status 04:47:37 INFO] reading housekeeping
[Status 04:47:55 INFO] acquire complete
[Status 04:47:56 INFO] writing housekeeping
[Sequencer 04:47:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:47:56 INFO] incremented W scene to 89 completed views
[Sequencer 04:47:56 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:47:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:47:56 INFO] incremented to [AERI set: name X89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:47:56 INFO] W89.SIG(18)
[sigmove 04:47:56 DEBUG] transformed W89Ma.SPC -> W89MA.SPC
[sigmove 04:47:56 DEBUG] transformed W89Mb.SPC -> W89MB.SPC
[sigmove 04:47:56 DEBUG] transformed W89Mc.SPC -> W89MC.SPC
[sigmove 04:47:56 DEBUG] transformed W89Md.SPC -> W89MD.SPC
[sigmove 04:47:56 DEBUG] transformed W89Me.SPC -> W89ME.SPC
[sigmove 04:47:56 DEBUG] transformed W89Mf.SPC -> W89MF.SPC
[Status 04:47:56 INFO] data for W89 transferred to science data processing
[Tidy 04:47:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:47:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:47:56 INFO] resetting WatchDogTimer
[Status 04:47:56 INFO] Starting Set [AERI set: name X89, 6 scans, 0 angle, D16300 command]
[Ingest 04:47:56 INFO] Sending XML status message
[Status 04:47:56 INFO] Mirror angle: 0
[Mirror 04:47:56 INFO] rotating to position X
[Status 04:47:56 INFO] .SET file for ACQ96 ready
[Ingest 04:47:56 INFO] Starting acquisition
[Status 04:47:57 INFO] reading housekeeping
[Status 04:48:14 INFO] acquire complete
[Status 04:48:15 INFO] writing housekeeping
[Sequencer 04:48:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:48:15 INFO] incremented X scene to 89 completed views
[Sequencer 04:48:15 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:48:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:48:15 INFO] incremented to [AERI set: name Y89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:48:15 INFO] X89.SIG(18)
[sigmove 04:48:15 DEBUG] transformed X89Ma.SPC -> X89MA.SPC
[sigmove 04:48:15 DEBUG] transformed X89Mb.SPC -> X89MB.SPC
[sigmove 04:48:15 DEBUG] transformed X89Mc.SPC -> X89MC.SPC
[sigmove 04:48:15 DEBUG] transformed X89Md.SPC -> X89MD.SPC
[sigmove 04:48:15 DEBUG] transformed X89Me.SPC -> X89ME.SPC
[sigmove 04:48:15 DEBUG] transformed X89Mf.SPC -> X89MF.SPC
[Status 04:48:15 INFO] data for X89 transferred to science data processing
[Tidy 04:48:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:48:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:48:15 INFO] resetting WatchDogTimer
[Status 04:48:15 INFO] Starting Set [AERI set: name Y89, 6 scans, 0 angle, D16300 command]
[Ingest 04:48:15 INFO] Sending XML status message
[Status 04:48:15 INFO] Mirror angle: 0
[Mirror 04:48:15 INFO] rotating to position Y
[Status 04:48:15 INFO] .SET file for ACQ96 ready
[Ingest 04:48:16 INFO] Starting acquisition
[Status 04:48:16 INFO] reading housekeeping
[Status 04:48:33 INFO] acquire complete
[Status 04:48:34 INFO] writing housekeeping
[Sequencer 04:48:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:48:34 INFO] incremented Y scene to 89 completed views
[Sequencer 04:48:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:48:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:48:34 INFO] incremented to [AERI set: name Z89, 6 scans, 0 angle, D16300 command] set
[sigmove 04:48:34 INFO] Y89.SIG(18)
[sigmove 04:48:34 DEBUG] transformed Y89Ma.SPC -> Y89MA.SPC
[sigmove 04:48:34 DEBUG] transformed Y89Mb.SPC -> Y89MB.SPC
[sigmove 04:48:34 DEBUG] transformed Y89Mc.SPC -> Y89MC.SPC
[sigmove 04:48:34 DEBUG] transformed Y89Md.SPC -> Y89MD.SPC
[sigmove 04:48:34 DEBUG] transformed Y89Me.SPC -> Y89ME.SPC
[sigmove 04:48:34 DEBUG] transformed Y89Mf.SPC -> Y89MF.SPC
[Status 04:48:34 INFO] data for Y89 transferred to science data processing
[Tidy 04:48:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:48:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:48:34 INFO] resetting WatchDogTimer
[Status 04:48:34 INFO] Starting Set [AERI set: name Z89, 6 scans, 0 angle, D16300 command]
[Ingest 04:48:34 INFO] Sending XML status message
[Status 04:48:34 INFO] Mirror angle: 0
[Mirror 04:48:34 INFO] rotating to position Z
[Status 04:48:34 INFO] .SET file for ACQ96 ready
[Ingest 04:48:35 INFO] Starting acquisition
[Status 04:48:35 INFO] reading housekeeping
[Status 04:48:53 INFO] acquire complete
[Status 04:48:53 INFO] writing housekeeping
[Sequencer 04:48:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:48:53 INFO] incremented Z scene to 89 completed views
[Sequencer 04:48:53 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:48:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:48:53 INFO] incremented to [AERI set: name A90, 6 scans, 120 angle, D28300 command] set
[sigmove 04:48:53 INFO] Z89.SIG(18)
[sigmove 04:48:53 DEBUG] transformed Z89Ma.SPC -> Z89MA.SPC
[sigmove 04:48:53 DEBUG] transformed Z89Mb.SPC -> Z89MB.SPC
[sigmove 04:48:53 DEBUG] transformed Z89Mc.SPC -> Z89MC.SPC
[sigmove 04:48:53 DEBUG] transformed Z89Md.SPC -> Z89MD.SPC
[sigmove 04:48:53 DEBUG] transformed Z89Me.SPC -> Z89ME.SPC
[sigmove 04:48:53 DEBUG] transformed Z89Mf.SPC -> Z89MF.SPC
[Status 04:48:53 INFO] data for Z89 transferred to science data processing
[Tidy 04:48:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:48:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:48:53 INFO] resetting WatchDogTimer
[Status 04:48:53 INFO] Starting Set [AERI set: name A90, 6 scans, 120 angle, D28300 command]
[Ingest 04:48:53 INFO] Sending XML status message
[Status 04:48:53 INFO] Mirror angle: 120
[Mirror 04:48:53 INFO] rotating to position A
[Status 04:48:55 INFO] .SET file for ACQ96 ready
[Ingest 04:48:55 INFO] Starting acquisition
[Status 04:48:55 INFO] reading housekeeping
[Status 04:49:13 INFO] acquire complete
[Status 04:49:13 INFO] writing housekeeping
[Sequencer 04:49:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:49:13 INFO] incremented A scene to 90 completed views
[Sequencer 04:49:13 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:49:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:49:13 INFO] incremented to [AERI set: name H90, 6 scans, 60 angle, D22500 command] set
[sigmove 04:49:13 INFO] A90.SIG(18)
[sigmove 04:49:13 DEBUG] transformed A90Ma.SPC -> A90MA.SPC
[sigmove 04:49:13 DEBUG] transformed A90Mb.SPC -> A90MB.SPC
[sigmove 04:49:13 DEBUG] transformed A90Mc.SPC -> A90MC.SPC
[sigmove 04:49:13 DEBUG] transformed A90Md.SPC -> A90MD.SPC
[sigmove 04:49:13 DEBUG] transformed A90Me.SPC -> A90ME.SPC
[sigmove 04:49:13 DEBUG] transformed A90Mf.SPC -> A90MF.SPC
[Status 04:49:13 INFO] data for A90 transferred to science data processing
[Tidy 04:49:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:49:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:49:13 INFO] resetting WatchDogTimer
[Status 04:49:13 INFO] Starting Set [AERI set: name H90, 6 scans, 60 angle, D22500 command]
[Ingest 04:49:13 INFO] Sending XML status message
[Status 04:49:13 INFO] Mirror angle: 60
[Mirror 04:49:14 INFO] rotating to position H
[Status 04:49:14 INFO] .SET file for ACQ96 ready
[Ingest 04:49:14 INFO] Starting acquisition
[Status 04:49:15 INFO] reading housekeeping
[Status 04:49:33 INFO] acquire complete
[Status 04:49:33 INFO] writing housekeeping
[Sequencer 04:49:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:49:33 INFO] incremented H scene to 90 completed views
[Sequencer 04:49:33 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:49:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:49:33 INFO] incremented to [AERI set: name S90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:49:33 INFO] H90.SIG(18)
[sigmove 04:49:33 DEBUG] transformed H90Ma.SPC -> H90MA.SPC
[sigmove 04:49:33 DEBUG] transformed H90Mb.SPC -> H90MB.SPC
[sigmove 04:49:33 DEBUG] transformed H90Mc.SPC -> H90MC.SPC
[sigmove 04:49:33 DEBUG] transformed H90Md.SPC -> H90MD.SPC
[sigmove 04:49:33 DEBUG] transformed H90Me.SPC -> H90ME.SPC
[sigmove 04:49:33 DEBUG] transformed H90Mf.SPC -> H90MF.SPC
[Status 04:49:33 INFO] data for H90 transferred to science data processing
[Tidy 04:49:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:49:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:49:33 INFO] resetting WatchDogTimer
[Status 04:49:34 INFO] Starting Set [AERI set: name S90, 6 scans, 0 angle, D16300 command]
[Ingest 04:49:34 INFO] Sending XML status message
[Status 04:49:34 INFO] Mirror angle: 0
[Mirror 04:49:34 INFO] rotating to position S
[Status 04:49:35 INFO] .SET file for ACQ96 ready
[Ingest 04:49:35 INFO] Starting acquisition
[Status 04:49:35 INFO] reading housekeeping
[Status 04:49:53 INFO] acquire complete
[Status 04:49:54 INFO] writing housekeeping
[Sequencer 04:49:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:49:54 INFO] incremented S scene to 90 completed views
[Sequencer 04:49:54 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:49:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:49:54 INFO] incremented to [AERI set: name T90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:49:54 INFO] S90.SIG(18)
[sigmove 04:49:54 DEBUG] transformed S90Ma.SPC -> S90MA.SPC
[sigmove 04:49:54 DEBUG] transformed S90Mb.SPC -> S90MB.SPC
[sigmove 04:49:54 DEBUG] transformed S90Mc.SPC -> S90MC.SPC
[sigmove 04:49:54 DEBUG] transformed S90Md.SPC -> S90MD.SPC
[sigmove 04:49:54 DEBUG] transformed S90Me.SPC -> S90ME.SPC
[sigmove 04:49:54 DEBUG] transformed S90Mf.SPC -> S90MF.SPC
[Status 04:49:54 INFO] data for S90 transferred to science data processing
[Tidy 04:49:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:49:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:49:54 INFO] resetting WatchDogTimer
[Status 04:49:54 INFO] Starting Set [AERI set: name T90, 6 scans, 0 angle, D16300 command]
[Ingest 04:49:54 INFO] Sending XML status message
[Status 04:49:54 INFO] Mirror angle: 0
[Mirror 04:49:54 INFO] rotating to position T
[Status 04:49:54 INFO] .SET file for ACQ96 ready
[Ingest 04:49:54 INFO] Starting acquisition
[Status 04:49:54 INFO] reading housekeeping
[Status 04:50:12 INFO] acquire complete
[Status 04:50:13 INFO] writing housekeeping
[Sequencer 04:50:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:50:13 INFO] incremented T scene to 90 completed views
[Sequencer 04:50:13 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:50:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:50:13 INFO] incremented to [AERI set: name U90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:50:13 INFO] T90.SIG(18)
[sigmove 04:50:13 DEBUG] transformed T90Ma.SPC -> T90MA.SPC
[sigmove 04:50:13 DEBUG] transformed T90Mb.SPC -> T90MB.SPC
[sigmove 04:50:13 DEBUG] transformed T90Mc.SPC -> T90MC.SPC
[sigmove 04:50:13 DEBUG] transformed T90Md.SPC -> T90MD.SPC
[sigmove 04:50:13 DEBUG] transformed T90Me.SPC -> T90ME.SPC
[sigmove 04:50:13 DEBUG] transformed T90Mf.SPC -> T90MF.SPC
[Status 04:50:13 INFO] data for T90 transferred to science data processing
[Tidy 04:50:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:50:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:50:13 INFO] resetting WatchDogTimer
[Status 04:50:13 INFO] Starting Set [AERI set: name U90, 6 scans, 0 angle, D16300 command]
[Ingest 04:50:13 INFO] Sending XML status message
[Status 04:50:13 INFO] Mirror angle: 0
[Mirror 04:50:13 INFO] rotating to position U
[Status 04:50:13 INFO] .SET file for ACQ96 ready
[Ingest 04:50:13 INFO] Starting acquisition
[Status 04:50:14 INFO] reading housekeeping
[Status 04:50:31 INFO] acquire complete
[Status 04:50:32 INFO] writing housekeeping
[Sequencer 04:50:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:50:32 INFO] incremented U scene to 90 completed views
[Sequencer 04:50:32 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:50:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:50:32 INFO] incremented to [AERI set: name V90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:50:32 INFO] U90.SIG(18)
[sigmove 04:50:32 DEBUG] transformed U90Ma.SPC -> U90MA.SPC
[sigmove 04:50:32 DEBUG] transformed U90Mb.SPC -> U90MB.SPC
[sigmove 04:50:32 DEBUG] transformed U90Mc.SPC -> U90MC.SPC
[sigmove 04:50:32 DEBUG] transformed U90Md.SPC -> U90MD.SPC
[sigmove 04:50:32 DEBUG] transformed U90Me.SPC -> U90ME.SPC
[sigmove 04:50:32 DEBUG] transformed U90Mf.SPC -> U90MF.SPC
[Status 04:50:32 INFO] data for U90 transferred to science data processing
[Tidy 04:50:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:50:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:50:32 INFO] resetting WatchDogTimer
[Status 04:50:32 INFO] Starting Set [AERI set: name V90, 6 scans, 0 angle, D16300 command]
[Ingest 04:50:32 INFO] Sending XML status message
[Status 04:50:32 INFO] Mirror angle: 0
[Mirror 04:50:32 INFO] rotating to position V
[Status 04:50:32 INFO] .SET file for ACQ96 ready
[Ingest 04:50:32 INFO] Starting acquisition
[Status 04:50:33 INFO] reading housekeeping
[Status 04:50:50 INFO] acquire complete
[Status 04:50:51 INFO] writing housekeeping
[Sequencer 04:50:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:50:51 INFO] incremented V scene to 90 completed views
[Sequencer 04:50:51 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:50:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:50:51 INFO] incremented to [AERI set: name W90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:50:51 INFO] V90.SIG(18)
[sigmove 04:50:51 DEBUG] transformed V90Ma.SPC -> V90MA.SPC
[sigmove 04:50:51 DEBUG] transformed V90Mb.SPC -> V90MB.SPC
[sigmove 04:50:51 DEBUG] transformed V90Mc.SPC -> V90MC.SPC
[sigmove 04:50:51 DEBUG] transformed V90Md.SPC -> V90MD.SPC
[sigmove 04:50:51 DEBUG] transformed V90Me.SPC -> V90ME.SPC
[sigmove 04:50:51 DEBUG] transformed V90Mf.SPC -> V90MF.SPC
[Status 04:50:51 INFO] data for V90 transferred to science data processing
[Tidy 04:50:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:50:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:50:51 INFO] resetting WatchDogTimer
[Status 04:50:51 INFO] Starting Set [AERI set: name W90, 6 scans, 0 angle, D16300 command]
[Ingest 04:50:51 INFO] Sending XML status message
[Status 04:50:51 INFO] Mirror angle: 0
[Mirror 04:50:51 INFO] rotating to position W
[Status 04:50:51 INFO] .SET file for ACQ96 ready
[Ingest 04:50:52 INFO] Starting acquisition
[Status 04:50:52 INFO] reading housekeeping
[Status 04:51:09 INFO] acquire complete
[Status 04:51:10 INFO] writing housekeeping
[Sequencer 04:51:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:51:10 INFO] incremented W scene to 90 completed views
[Sequencer 04:51:10 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:51:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:51:10 INFO] incremented to [AERI set: name X90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:51:10 INFO] W90.SIG(18)
[sigmove 04:51:10 DEBUG] transformed W90Ma.SPC -> W90MA.SPC
[sigmove 04:51:10 DEBUG] transformed W90Mb.SPC -> W90MB.SPC
[sigmove 04:51:10 DEBUG] transformed W90Mc.SPC -> W90MC.SPC
[sigmove 04:51:10 DEBUG] transformed W90Md.SPC -> W90MD.SPC
[sigmove 04:51:10 DEBUG] transformed W90Me.SPC -> W90ME.SPC
[sigmove 04:51:10 DEBUG] transformed W90Mf.SPC -> W90MF.SPC
[Status 04:51:10 INFO] data for W90 transferred to science data processing
[Tidy 04:51:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:51:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:51:10 INFO] resetting WatchDogTimer
[Status 04:51:10 INFO] Starting Set [AERI set: name X90, 6 scans, 0 angle, D16300 command]
[Ingest 04:51:10 INFO] Sending XML status message
[Status 04:51:10 INFO] Mirror angle: 0
[Mirror 04:51:10 INFO] rotating to position X
[Status 04:51:10 INFO] .SET file for ACQ96 ready
[Ingest 04:51:11 INFO] Starting acquisition
[Status 04:51:11 INFO] reading housekeeping
[Status 04:51:29 INFO] acquire complete
[Status 04:51:29 INFO] writing housekeeping
[Sequencer 04:51:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:51:29 INFO] incremented X scene to 90 completed views
[Sequencer 04:51:29 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:51:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:51:29 INFO] incremented to [AERI set: name Y90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:51:29 INFO] X90.SIG(18)
[sigmove 04:51:29 DEBUG] transformed X90Ma.SPC -> X90MA.SPC
[sigmove 04:51:29 DEBUG] transformed X90Mb.SPC -> X90MB.SPC
[sigmove 04:51:29 DEBUG] transformed X90Mc.SPC -> X90MC.SPC
[sigmove 04:51:29 DEBUG] transformed X90Md.SPC -> X90MD.SPC
[sigmove 04:51:29 DEBUG] transformed X90Me.SPC -> X90ME.SPC
[sigmove 04:51:29 DEBUG] transformed X90Mf.SPC -> X90MF.SPC
[Status 04:51:29 INFO] data for X90 transferred to science data processing
[Tidy 04:51:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:51:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:51:29 INFO] resetting WatchDogTimer
[Status 04:51:29 INFO] Starting Set [AERI set: name Y90, 6 scans, 0 angle, D16300 command]
[Ingest 04:51:29 INFO] Sending XML status message
[Status 04:51:29 INFO] Mirror angle: 0
[Mirror 04:51:29 INFO] rotating to position Y
[Status 04:51:30 INFO] .SET file for ACQ96 ready
[Ingest 04:51:30 INFO] Starting acquisition
[Status 04:51:30 INFO] reading housekeeping
[Status 04:51:48 INFO] acquire complete
[Status 04:51:48 INFO] writing housekeeping
[Sequencer 04:51:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:51:48 INFO] incremented Y scene to 90 completed views
[Sequencer 04:51:48 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:51:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:51:48 INFO] incremented to [AERI set: name Z90, 6 scans, 0 angle, D16300 command] set
[sigmove 04:51:48 INFO] Y90.SIG(18)
[sigmove 04:51:48 DEBUG] transformed Y90Ma.SPC -> Y90MA.SPC
[sigmove 04:51:48 DEBUG] transformed Y90Mb.SPC -> Y90MB.SPC
[sigmove 04:51:48 DEBUG] transformed Y90Mc.SPC -> Y90MC.SPC
[sigmove 04:51:48 DEBUG] transformed Y90Md.SPC -> Y90MD.SPC
[sigmove 04:51:48 DEBUG] transformed Y90Me.SPC -> Y90ME.SPC
[sigmove 04:51:48 DEBUG] transformed Y90Mf.SPC -> Y90MF.SPC
[Status 04:51:48 INFO] data for Y90 transferred to science data processing
[Tidy 04:51:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:51:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:51:48 INFO] resetting WatchDogTimer
[Status 04:51:48 INFO] Starting Set [AERI set: name Z90, 6 scans, 0 angle, D16300 command]
[Ingest 04:51:48 INFO] Sending XML status message
[Status 04:51:48 INFO] Mirror angle: 0
[Mirror 04:51:48 INFO] rotating to position Z
[Status 04:51:49 INFO] .SET file for ACQ96 ready
[Ingest 04:51:49 INFO] Starting acquisition
[Status 04:51:49 INFO] reading housekeeping
[Status 04:52:07 INFO] acquire complete
[Status 04:52:07 INFO] writing housekeeping
[Sequencer 04:52:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:52:07 INFO] incremented Z scene to 90 completed views
[Sequencer 04:52:07 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:52:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:52:07 INFO] incremented to [AERI set: name H91, 6 scans, 60 angle, D22500 command] set
[sigmove 04:52:07 INFO] Z90.SIG(18)
[sigmove 04:52:07 DEBUG] transformed Z90Ma.SPC -> Z90MA.SPC
[sigmove 04:52:07 DEBUG] transformed Z90Mb.SPC -> Z90MB.SPC
[sigmove 04:52:07 DEBUG] transformed Z90Mc.SPC -> Z90MC.SPC
[sigmove 04:52:07 DEBUG] transformed Z90Md.SPC -> Z90MD.SPC
[sigmove 04:52:07 DEBUG] transformed Z90Me.SPC -> Z90ME.SPC
[sigmove 04:52:07 DEBUG] transformed Z90Mf.SPC -> Z90MF.SPC
[Status 04:52:07 INFO] data for Z90 transferred to science data processing
[Tidy 04:52:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:52:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:52:07 INFO] resetting WatchDogTimer
[Status 04:52:07 INFO] Starting Set [AERI set: name H91, 6 scans, 60 angle, D22500 command]
[Ingest 04:52:07 INFO] Sending XML status message
[Status 04:52:07 INFO] Mirror angle: 60
[Mirror 04:52:07 INFO] rotating to position H
[Status 04:52:08 INFO] .SET file for ACQ96 ready
[Ingest 04:52:08 INFO] Starting acquisition
[Status 04:52:09 INFO] reading housekeeping
[Status 04:52:27 INFO] acquire complete
[Status 04:52:27 INFO] writing housekeeping
[Sequencer 04:52:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:52:27 INFO] incremented H scene to 91 completed views
[Sequencer 04:52:27 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:52:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:52:27 INFO] incremented to [AERI set: name A91, 6 scans, 120 angle, D28300 command] set
[sigmove 04:52:27 INFO] H91.SIG(18)
[sigmove 04:52:27 DEBUG] transformed H91Ma.SPC -> H91MA.SPC
[sigmove 04:52:27 DEBUG] transformed H91Mb.SPC -> H91MB.SPC
[sigmove 04:52:27 DEBUG] transformed H91Mc.SPC -> H91MC.SPC
[sigmove 04:52:27 DEBUG] transformed H91Md.SPC -> H91MD.SPC
[sigmove 04:52:27 DEBUG] transformed H91Me.SPC -> H91ME.SPC
[sigmove 04:52:27 DEBUG] transformed H91Mf.SPC -> H91MF.SPC
[Status 04:52:27 INFO] data for H91 transferred to science data processing
[Tidy 04:52:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:52:27 INFO] A89.FIN(19),H89.FIN(19),S89.FIN(19),T89.FIN(19),U89.FIN(19),V89.FIN(19),W89.FIN(19),X89.FIN(19),Y89.FIN(19),Z89.FIN(19),A90.FIN(19),H90.FIN(19),S90.FIN(19),T90.FIN(19),U90.FIN(19),V90.FIN(19),W90.FIN(19),X90.FIN(19),Y90.FIN(19),Z90.FIN(19)
[sigmove 04:52:27 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:52:27 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:52:29 DEBUG] done zipping
[WatchDog 04:52:29 INFO] resetting WatchDogTimer
[Status 04:52:29 INFO] Starting Set [AERI set: name A91, 6 scans, 120 angle, D28300 command]
[Ingest 04:52:29 INFO] Sending XML status message
[Status 04:52:29 INFO] Mirror angle: 120
[Mirror 04:52:30 INFO] rotating to position A
[Status 04:52:30 INFO] .SET file for ACQ96 ready
[Ingest 04:52:31 INFO] Starting acquisition
[Status 04:52:31 INFO] reading housekeeping
[Status 04:52:48 INFO] acquire complete
[Status 04:52:49 INFO] writing housekeeping
[Sequencer 04:52:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:52:49 INFO] incremented A scene to 91 completed views
[Sequencer 04:52:49 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:52:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:52:49 INFO] incremented to [AERI set: name S91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:52:49 INFO] A91.SIG(18)
[sigmove 04:52:49 DEBUG] transformed A91Ma.SPC -> A91MA.SPC
[sigmove 04:52:49 DEBUG] transformed A91Mb.SPC -> A91MB.SPC
[sigmove 04:52:49 DEBUG] transformed A91Mc.SPC -> A91MC.SPC
[sigmove 04:52:49 DEBUG] transformed A91Md.SPC -> A91MD.SPC
[sigmove 04:52:49 DEBUG] transformed A91Me.SPC -> A91ME.SPC
[sigmove 04:52:49 DEBUG] transformed A91Mf.SPC -> A91MF.SPC
[Status 04:52:49 INFO] data for A91 transferred to science data processing
[Tidy 04:52:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:52:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:52:49 INFO] resetting WatchDogTimer
[Status 04:52:49 INFO] Starting Set [AERI set: name S91, 6 scans, 0 angle, D16300 command]
[Ingest 04:52:49 INFO] Sending XML status message
[Status 04:52:49 INFO] Mirror angle: 0
[Mirror 04:52:49 INFO] rotating to position S
[Status 04:52:50 INFO] .SET file for ACQ96 ready
[Ingest 04:52:50 INFO] Starting acquisition
[Status 04:52:51 INFO] reading housekeeping
[Status 04:53:08 INFO] acquire complete
[Status 04:53:09 INFO] writing housekeeping
[Sequencer 04:53:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:53:09 INFO] incremented S scene to 91 completed views
[Sequencer 04:53:09 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:53:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:53:09 INFO] incremented to [AERI set: name T91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:53:09 INFO] S91.SIG(18)
[sigmove 04:53:09 DEBUG] transformed S91Ma.SPC -> S91MA.SPC
[sigmove 04:53:09 DEBUG] transformed S91Mb.SPC -> S91MB.SPC
[sigmove 04:53:09 DEBUG] transformed S91Mc.SPC -> S91MC.SPC
[sigmove 04:53:09 DEBUG] transformed S91Md.SPC -> S91MD.SPC
[sigmove 04:53:09 DEBUG] transformed S91Me.SPC -> S91ME.SPC
[sigmove 04:53:09 DEBUG] transformed S91Mf.SPC -> S91MF.SPC
[Status 04:53:09 INFO] data for S91 transferred to science data processing
[Tidy 04:53:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:53:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:53:09 INFO] resetting WatchDogTimer
[Status 04:53:09 INFO] Starting Set [AERI set: name T91, 6 scans, 0 angle, D16300 command]
[Ingest 04:53:09 INFO] Sending XML status message
[Status 04:53:09 INFO] Mirror angle: 0
[Mirror 04:53:09 INFO] rotating to position T
[Status 04:53:09 INFO] .SET file for ACQ96 ready
[Ingest 04:53:10 INFO] Starting acquisition
[Status 04:53:10 INFO] reading housekeeping
[Status 04:53:28 INFO] acquire complete
[Status 04:53:28 INFO] writing housekeeping
[Sequencer 04:53:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:53:28 INFO] incremented T scene to 91 completed views
[Sequencer 04:53:28 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:53:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:53:28 INFO] incremented to [AERI set: name U91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:53:28 INFO] T91.SIG(18)
[sigmove 04:53:28 DEBUG] transformed T91Ma.SPC -> T91MA.SPC
[sigmove 04:53:28 DEBUG] transformed T91Mb.SPC -> T91MB.SPC
[sigmove 04:53:28 DEBUG] transformed T91Mc.SPC -> T91MC.SPC
[sigmove 04:53:28 DEBUG] transformed T91Md.SPC -> T91MD.SPC
[sigmove 04:53:28 DEBUG] transformed T91Me.SPC -> T91ME.SPC
[sigmove 04:53:28 DEBUG] transformed T91Mf.SPC -> T91MF.SPC
[Status 04:53:28 INFO] data for T91 transferred to science data processing
[Tidy 04:53:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:53:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:53:28 INFO] resetting WatchDogTimer
[Status 04:53:28 INFO] Starting Set [AERI set: name U91, 6 scans, 0 angle, D16300 command]
[Ingest 04:53:28 INFO] Sending XML status message
[Status 04:53:28 INFO] Mirror angle: 0
[Mirror 04:53:28 INFO] rotating to position U
[Status 04:53:29 INFO] .SET file for ACQ96 ready
[Ingest 04:53:29 INFO] Starting acquisition
[Status 04:53:29 INFO] reading housekeeping
[Status 04:53:47 INFO] acquire complete
[Status 04:53:47 INFO] writing housekeeping
[Sequencer 04:53:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:53:47 INFO] incremented U scene to 91 completed views
[Sequencer 04:53:47 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:53:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:53:47 INFO] incremented to [AERI set: name V91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:53:47 INFO] U91.SIG(18)
[sigmove 04:53:47 DEBUG] transformed U91Ma.SPC -> U91MA.SPC
[sigmove 04:53:47 DEBUG] transformed U91Mb.SPC -> U91MB.SPC
[sigmove 04:53:47 DEBUG] transformed U91Mc.SPC -> U91MC.SPC
[sigmove 04:53:47 DEBUG] transformed U91Md.SPC -> U91MD.SPC
[sigmove 04:53:47 DEBUG] transformed U91Me.SPC -> U91ME.SPC
[sigmove 04:53:47 DEBUG] transformed U91Mf.SPC -> U91MF.SPC
[Status 04:53:47 INFO] data for U91 transferred to science data processing
[Tidy 04:53:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:53:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:53:47 INFO] resetting WatchDogTimer
[Status 04:53:47 INFO] Starting Set [AERI set: name V91, 6 scans, 0 angle, D16300 command]
[Ingest 04:53:47 INFO] Sending XML status message
[Status 04:53:47 INFO] Mirror angle: 0
[Mirror 04:53:47 INFO] rotating to position V
[Status 04:53:48 INFO] .SET file for ACQ96 ready
[Ingest 04:53:48 INFO] Starting acquisition
[Status 04:53:48 INFO] reading housekeeping
[Status 04:54:06 INFO] acquire complete
[Status 04:54:06 INFO] writing housekeeping
[Sequencer 04:54:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:54:06 INFO] incremented V scene to 91 completed views
[Sequencer 04:54:06 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:54:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:54:06 INFO] incremented to [AERI set: name W91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:54:06 INFO] V91.SIG(18)
[sigmove 04:54:06 DEBUG] transformed V91Ma.SPC -> V91MA.SPC
[sigmove 04:54:06 DEBUG] transformed V91Mb.SPC -> V91MB.SPC
[sigmove 04:54:06 DEBUG] transformed V91Mc.SPC -> V91MC.SPC
[sigmove 04:54:06 DEBUG] transformed V91Md.SPC -> V91MD.SPC
[sigmove 04:54:06 DEBUG] transformed V91Me.SPC -> V91ME.SPC
[sigmove 04:54:06 DEBUG] transformed V91Mf.SPC -> V91MF.SPC
[Status 04:54:06 INFO] data for V91 transferred to science data processing
[Tidy 04:54:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:54:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:54:06 INFO] resetting WatchDogTimer
[Status 04:54:06 INFO] Starting Set [AERI set: name W91, 6 scans, 0 angle, D16300 command]
[Ingest 04:54:06 INFO] Sending XML status message
[Status 04:54:06 INFO] Mirror angle: 0
[Mirror 04:54:06 INFO] rotating to position W
[Status 04:54:07 INFO] .SET file for ACQ96 ready
[Ingest 04:54:07 INFO] Starting acquisition
[Status 04:54:07 INFO] reading housekeeping
[Status 04:54:25 INFO] acquire complete
[Status 04:54:25 INFO] writing housekeeping
[Sequencer 04:54:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:54:25 INFO] incremented W scene to 91 completed views
[Sequencer 04:54:25 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:54:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:54:25 INFO] incremented to [AERI set: name X91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:54:25 INFO] W91.SIG(18)
[sigmove 04:54:25 DEBUG] transformed W91Ma.SPC -> W91MA.SPC
[sigmove 04:54:25 DEBUG] transformed W91Mb.SPC -> W91MB.SPC
[sigmove 04:54:25 DEBUG] transformed W91Mc.SPC -> W91MC.SPC
[sigmove 04:54:25 DEBUG] transformed W91Md.SPC -> W91MD.SPC
[sigmove 04:54:25 DEBUG] transformed W91Me.SPC -> W91ME.SPC
[sigmove 04:54:25 DEBUG] transformed W91Mf.SPC -> W91MF.SPC
[Status 04:54:25 INFO] data for W91 transferred to science data processing
[Tidy 04:54:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:54:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:54:25 INFO] resetting WatchDogTimer
[Status 04:54:25 INFO] Starting Set [AERI set: name X91, 6 scans, 0 angle, D16300 command]
[Ingest 04:54:25 INFO] Sending XML status message
[Status 04:54:25 INFO] Mirror angle: 0
[Mirror 04:54:26 INFO] rotating to position X
[Status 04:54:26 INFO] .SET file for ACQ96 ready
[Ingest 04:54:26 INFO] Starting acquisition
[Status 04:54:26 INFO] reading housekeeping
[Status 04:54:44 INFO] acquire complete
[Status 04:54:44 INFO] writing housekeeping
[Sequencer 04:54:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:54:44 INFO] incremented X scene to 91 completed views
[Sequencer 04:54:44 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:54:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:54:44 INFO] incremented to [AERI set: name Y91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:54:44 INFO] X91.SIG(18)
[sigmove 04:54:44 DEBUG] transformed X91Ma.SPC -> X91MA.SPC
[sigmove 04:54:44 DEBUG] transformed X91Mb.SPC -> X91MB.SPC
[sigmove 04:54:44 DEBUG] transformed X91Mc.SPC -> X91MC.SPC
[sigmove 04:54:44 DEBUG] transformed X91Md.SPC -> X91MD.SPC
[sigmove 04:54:44 DEBUG] transformed X91Me.SPC -> X91ME.SPC
[sigmove 04:54:44 DEBUG] transformed X91Mf.SPC -> X91MF.SPC
[Status 04:54:44 INFO] data for X91 transferred to science data processing
[Tidy 04:54:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:54:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:54:44 INFO] resetting WatchDogTimer
[Status 04:54:44 INFO] Starting Set [AERI set: name Y91, 6 scans, 0 angle, D16300 command]
[Ingest 04:54:44 INFO] Sending XML status message
[Status 04:54:44 INFO] Mirror angle: 0
[Mirror 04:54:45 INFO] rotating to position Y
[Status 04:54:45 INFO] .SET file for ACQ96 ready
[Ingest 04:54:45 INFO] Starting acquisition
[Status 04:54:45 INFO] reading housekeeping
[Status 04:55:03 INFO] acquire complete
[Status 04:55:03 INFO] writing housekeeping
[Sequencer 04:55:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:55:03 INFO] incremented Y scene to 91 completed views
[Sequencer 04:55:03 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:55:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:55:03 INFO] incremented to [AERI set: name Z91, 6 scans, 0 angle, D16300 command] set
[sigmove 04:55:03 INFO] Y91.SIG(18)
[sigmove 04:55:03 DEBUG] transformed Y91Ma.SPC -> Y91MA.SPC
[sigmove 04:55:03 DEBUG] transformed Y91Mb.SPC -> Y91MB.SPC
[sigmove 04:55:03 DEBUG] transformed Y91Mc.SPC -> Y91MC.SPC
[sigmove 04:55:03 DEBUG] transformed Y91Md.SPC -> Y91MD.SPC
[sigmove 04:55:03 DEBUG] transformed Y91Me.SPC -> Y91ME.SPC
[sigmove 04:55:03 DEBUG] transformed Y91Mf.SPC -> Y91MF.SPC
[Status 04:55:03 INFO] data for Y91 transferred to science data processing
[Tidy 04:55:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:55:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:55:03 INFO] resetting WatchDogTimer
[Status 04:55:04 INFO] Starting Set [AERI set: name Z91, 6 scans, 0 angle, D16300 command]
[Ingest 04:55:04 INFO] Sending XML status message
[Status 04:55:04 INFO] Mirror angle: 0
[Mirror 04:55:04 INFO] rotating to position Z
[Status 04:55:04 INFO] .SET file for ACQ96 ready
[Ingest 04:55:04 INFO] Starting acquisition
[Status 04:55:04 INFO] reading housekeeping
[Status 04:55:22 INFO] acquire complete
[Status 04:55:22 INFO] writing housekeeping
[Sequencer 04:55:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:55:22 INFO] incremented Z scene to 91 completed views
[Sequencer 04:55:22 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:55:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:55:23 INFO] incremented to [AERI set: name A92, 6 scans, 120 angle, D28300 command] set
[sigmove 04:55:23 INFO] Z91.SIG(18)
[sigmove 04:55:23 DEBUG] transformed Z91Ma.SPC -> Z91MA.SPC
[sigmove 04:55:23 DEBUG] transformed Z91Mb.SPC -> Z91MB.SPC
[sigmove 04:55:23 DEBUG] transformed Z91Mc.SPC -> Z91MC.SPC
[sigmove 04:55:23 DEBUG] transformed Z91Md.SPC -> Z91MD.SPC
[sigmove 04:55:23 DEBUG] transformed Z91Me.SPC -> Z91ME.SPC
[sigmove 04:55:23 DEBUG] transformed Z91Mf.SPC -> Z91MF.SPC
[Status 04:55:23 INFO] data for Z91 transferred to science data processing
[Tidy 04:55:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:55:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:55:23 INFO] resetting WatchDogTimer
[Status 04:55:23 INFO] Starting Set [AERI set: name A92, 6 scans, 120 angle, D28300 command]
[Ingest 04:55:23 INFO] Sending XML status message
[Status 04:55:23 INFO] Mirror angle: 120
[Mirror 04:55:23 INFO] rotating to position A
[Status 04:55:24 INFO] .SET file for ACQ96 ready
[Ingest 04:55:24 INFO] Starting acquisition
[Status 04:55:24 INFO] reading housekeeping
[Status 04:55:42 INFO] acquire complete
[Status 04:55:43 INFO] writing housekeeping
[Sequencer 04:55:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:55:43 INFO] incremented A scene to 92 completed views
[Sequencer 04:55:43 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:55:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:55:43 INFO] incremented to [AERI set: name H92, 6 scans, 60 angle, D22500 command] set
[sigmove 04:55:43 INFO] A92.SIG(18)
[sigmove 04:55:43 DEBUG] transformed A92Ma.SPC -> A92MA.SPC
[sigmove 04:55:43 DEBUG] transformed A92Mb.SPC -> A92MB.SPC
[sigmove 04:55:43 DEBUG] transformed A92Mc.SPC -> A92MC.SPC
[sigmove 04:55:43 DEBUG] transformed A92Md.SPC -> A92MD.SPC
[sigmove 04:55:43 DEBUG] transformed A92Me.SPC -> A92ME.SPC
[sigmove 04:55:43 DEBUG] transformed A92Mf.SPC -> A92MF.SPC
[Status 04:55:43 INFO] data for A92 transferred to science data processing
[Tidy 04:55:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:55:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:55:43 INFO] resetting WatchDogTimer
[Status 04:55:43 INFO] Starting Set [AERI set: name H92, 6 scans, 60 angle, D22500 command]
[Ingest 04:55:43 INFO] Sending XML status message
[Status 04:55:43 INFO] Mirror angle: 60
[Mirror 04:55:43 INFO] rotating to position H
[Status 04:55:44 INFO] .SET file for ACQ96 ready
[Ingest 04:55:44 INFO] Starting acquisition
[Status 04:55:44 INFO] reading housekeeping
[Status 04:56:02 INFO] acquire complete
[Status 04:56:03 INFO] writing housekeeping
[Sequencer 04:56:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:56:03 INFO] incremented H scene to 92 completed views
[Sequencer 04:56:03 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:56:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:56:03 INFO] incremented to [AERI set: name S92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:56:03 INFO] H92.SIG(18)
[sigmove 04:56:03 DEBUG] transformed H92Ma.SPC -> H92MA.SPC
[sigmove 04:56:03 DEBUG] transformed H92Mb.SPC -> H92MB.SPC
[sigmove 04:56:03 DEBUG] transformed H92Mc.SPC -> H92MC.SPC
[sigmove 04:56:03 DEBUG] transformed H92Md.SPC -> H92MD.SPC
[sigmove 04:56:03 DEBUG] transformed H92Me.SPC -> H92ME.SPC
[sigmove 04:56:03 DEBUG] transformed H92Mf.SPC -> H92MF.SPC
[Status 04:56:03 INFO] data for H92 transferred to science data processing
[Tidy 04:56:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:56:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:56:03 INFO] resetting WatchDogTimer
[Status 04:56:03 INFO] Starting Set [AERI set: name S92, 6 scans, 0 angle, D16300 command]
[Ingest 04:56:03 INFO] Sending XML status message
[Status 04:56:03 INFO] Mirror angle: 0
[Mirror 04:56:03 INFO] rotating to position S
[Status 04:56:04 INFO] .SET file for ACQ96 ready
[Ingest 04:56:04 INFO] Starting acquisition
[Status 04:56:04 INFO] reading housekeeping
[Status 04:56:23 INFO] acquire complete
[Status 04:56:23 INFO] writing housekeeping
[Sequencer 04:56:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:56:23 INFO] incremented S scene to 92 completed views
[Sequencer 04:56:23 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:56:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:56:23 INFO] incremented to [AERI set: name T92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:56:23 INFO] S92.SIG(18)
[sigmove 04:56:23 DEBUG] transformed S92Ma.SPC -> S92MA.SPC
[sigmove 04:56:23 DEBUG] transformed S92Mb.SPC -> S92MB.SPC
[sigmove 04:56:23 DEBUG] transformed S92Mc.SPC -> S92MC.SPC
[sigmove 04:56:23 DEBUG] transformed S92Md.SPC -> S92MD.SPC
[sigmove 04:56:23 DEBUG] transformed S92Me.SPC -> S92ME.SPC
[sigmove 04:56:23 DEBUG] transformed S92Mf.SPC -> S92MF.SPC
[Status 04:56:23 INFO] data for S92 transferred to science data processing
[Tidy 04:56:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:56:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:56:23 INFO] resetting WatchDogTimer
[Status 04:56:23 INFO] Starting Set [AERI set: name T92, 6 scans, 0 angle, D16300 command]
[Ingest 04:56:23 INFO] Sending XML status message
[Status 04:56:23 INFO] Mirror angle: 0
[Mirror 04:56:24 INFO] rotating to position T
[Status 04:56:24 INFO] .SET file for ACQ96 ready
[Ingest 04:56:24 INFO] Starting acquisition
[Status 04:56:24 INFO] reading housekeeping
[Status 04:56:42 INFO] acquire complete
[Status 04:56:42 INFO] writing housekeeping
[Sequencer 04:56:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:56:42 INFO] incremented T scene to 92 completed views
[Sequencer 04:56:42 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:56:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:56:42 INFO] incremented to [AERI set: name U92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:56:42 INFO] T92.SIG(18)
[sigmove 04:56:42 DEBUG] transformed T92Ma.SPC -> T92MA.SPC
[sigmove 04:56:42 DEBUG] transformed T92Mb.SPC -> T92MB.SPC
[sigmove 04:56:42 DEBUG] transformed T92Mc.SPC -> T92MC.SPC
[sigmove 04:56:42 DEBUG] transformed T92Md.SPC -> T92MD.SPC
[sigmove 04:56:42 DEBUG] transformed T92Me.SPC -> T92ME.SPC
[sigmove 04:56:42 DEBUG] transformed T92Mf.SPC -> T92MF.SPC
[Status 04:56:42 INFO] data for T92 transferred to science data processing
[Tidy 04:56:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:56:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:56:42 INFO] resetting WatchDogTimer
[Status 04:56:42 INFO] Starting Set [AERI set: name U92, 6 scans, 0 angle, D16300 command]
[Ingest 04:56:42 INFO] Sending XML status message
[Status 04:56:42 INFO] Mirror angle: 0
[Mirror 04:56:42 INFO] rotating to position U
[Status 04:56:43 INFO] .SET file for ACQ96 ready
[Ingest 04:56:43 INFO] Starting acquisition
[Status 04:56:43 INFO] reading housekeeping
[Status 04:57:01 INFO] acquire complete
[Status 04:57:01 INFO] writing housekeeping
[Sequencer 04:57:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:57:01 INFO] incremented U scene to 92 completed views
[Sequencer 04:57:01 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:57:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:57:01 INFO] incremented to [AERI set: name V92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:57:01 INFO] U92.SIG(18)
[sigmove 04:57:01 DEBUG] transformed U92Ma.SPC -> U92MA.SPC
[sigmove 04:57:01 DEBUG] transformed U92Mb.SPC -> U92MB.SPC
[sigmove 04:57:01 DEBUG] transformed U92Mc.SPC -> U92MC.SPC
[sigmove 04:57:01 DEBUG] transformed U92Md.SPC -> U92MD.SPC
[sigmove 04:57:01 DEBUG] transformed U92Me.SPC -> U92ME.SPC
[sigmove 04:57:01 DEBUG] transformed U92Mf.SPC -> U92MF.SPC
[Status 04:57:01 INFO] data for U92 transferred to science data processing
[Tidy 04:57:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:57:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:57:01 INFO] resetting WatchDogTimer
[Status 04:57:01 INFO] Starting Set [AERI set: name V92, 6 scans, 0 angle, D16300 command]
[Ingest 04:57:01 INFO] Sending XML status message
[Status 04:57:01 INFO] Mirror angle: 0
[Mirror 04:57:02 INFO] rotating to position V
[Status 04:57:02 INFO] .SET file for ACQ96 ready
[Ingest 04:57:02 INFO] Starting acquisition
[Status 04:57:02 INFO] reading housekeeping
[Status 04:57:20 INFO] acquire complete
[Status 04:57:20 INFO] writing housekeeping
[Sequencer 04:57:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:57:20 INFO] incremented V scene to 92 completed views
[Sequencer 04:57:20 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:57:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:57:20 INFO] incremented to [AERI set: name W92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:57:20 INFO] V92.SIG(18)
[sigmove 04:57:20 DEBUG] transformed V92Ma.SPC -> V92MA.SPC
[sigmove 04:57:20 DEBUG] transformed V92Mb.SPC -> V92MB.SPC
[sigmove 04:57:20 DEBUG] transformed V92Mc.SPC -> V92MC.SPC
[sigmove 04:57:20 DEBUG] transformed V92Md.SPC -> V92MD.SPC
[sigmove 04:57:20 DEBUG] transformed V92Me.SPC -> V92ME.SPC
[sigmove 04:57:20 DEBUG] transformed V92Mf.SPC -> V92MF.SPC
[Status 04:57:20 INFO] data for V92 transferred to science data processing
[Tidy 04:57:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:57:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:57:20 INFO] resetting WatchDogTimer
[Status 04:57:21 INFO] Starting Set [AERI set: name W92, 6 scans, 0 angle, D16300 command]
[Ingest 04:57:21 INFO] Sending XML status message
[Status 04:57:21 INFO] Mirror angle: 0
[Mirror 04:57:21 INFO] rotating to position W
[Status 04:57:21 INFO] .SET file for ACQ96 ready
[Ingest 04:57:21 INFO] Starting acquisition
[Status 04:57:21 INFO] reading housekeeping
[Status 04:57:39 INFO] acquire complete
[Status 04:57:39 INFO] writing housekeeping
[Sequencer 04:57:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:57:39 INFO] incremented W scene to 92 completed views
[Sequencer 04:57:39 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:57:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:57:39 INFO] incremented to [AERI set: name X92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:57:39 INFO] W92.SIG(18)
[sigmove 04:57:39 DEBUG] transformed W92Ma.SPC -> W92MA.SPC
[sigmove 04:57:39 DEBUG] transformed W92Mb.SPC -> W92MB.SPC
[sigmove 04:57:39 DEBUG] transformed W92Mc.SPC -> W92MC.SPC
[sigmove 04:57:39 DEBUG] transformed W92Md.SPC -> W92MD.SPC
[sigmove 04:57:39 DEBUG] transformed W92Me.SPC -> W92ME.SPC
[sigmove 04:57:39 DEBUG] transformed W92Mf.SPC -> W92MF.SPC
[Status 04:57:39 INFO] data for W92 transferred to science data processing
[Tidy 04:57:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:57:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:57:39 INFO] resetting WatchDogTimer
[Status 04:57:40 INFO] Starting Set [AERI set: name X92, 6 scans, 0 angle, D16300 command]
[Ingest 04:57:40 INFO] Sending XML status message
[Status 04:57:40 INFO] Mirror angle: 0
[Mirror 04:57:40 INFO] rotating to position X
[Status 04:57:40 INFO] .SET file for ACQ96 ready
[Ingest 04:57:40 INFO] Starting acquisition
[Status 04:57:40 INFO] reading housekeeping
[Status 04:57:58 INFO] acquire complete
[Status 04:57:59 INFO] writing housekeeping
[Sequencer 04:57:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:57:59 INFO] incremented X scene to 92 completed views
[Sequencer 04:57:59 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:57:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:57:59 INFO] incremented to [AERI set: name Y92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:57:59 INFO] X92.SIG(18)
[sigmove 04:57:59 DEBUG] transformed X92Ma.SPC -> X92MA.SPC
[sigmove 04:57:59 DEBUG] transformed X92Mb.SPC -> X92MB.SPC
[sigmove 04:57:59 DEBUG] transformed X92Mc.SPC -> X92MC.SPC
[sigmove 04:57:59 DEBUG] transformed X92Md.SPC -> X92MD.SPC
[sigmove 04:57:59 DEBUG] transformed X92Me.SPC -> X92ME.SPC
[sigmove 04:57:59 DEBUG] transformed X92Mf.SPC -> X92MF.SPC
[Status 04:57:59 INFO] data for X92 transferred to science data processing
[Tidy 04:57:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:57:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:57:59 INFO] resetting WatchDogTimer
[Status 04:57:59 INFO] Starting Set [AERI set: name Y92, 6 scans, 0 angle, D16300 command]
[Ingest 04:57:59 INFO] Sending XML status message
[Status 04:57:59 INFO] Mirror angle: 0
[Mirror 04:57:59 INFO] rotating to position Y
[Status 04:57:59 INFO] .SET file for ACQ96 ready
[Ingest 04:57:59 INFO] Starting acquisition
[Status 04:57:59 INFO] reading housekeeping
[Status 04:58:17 INFO] acquire complete
[Status 04:58:18 INFO] writing housekeeping
[Sequencer 04:58:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:58:18 INFO] incremented Y scene to 92 completed views
[Sequencer 04:58:18 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:58:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:58:18 INFO] incremented to [AERI set: name Z92, 6 scans, 0 angle, D16300 command] set
[sigmove 04:58:18 INFO] Y92.SIG(18)
[sigmove 04:58:18 DEBUG] transformed Y92Ma.SPC -> Y92MA.SPC
[sigmove 04:58:18 DEBUG] transformed Y92Mb.SPC -> Y92MB.SPC
[sigmove 04:58:18 DEBUG] transformed Y92Mc.SPC -> Y92MC.SPC
[sigmove 04:58:18 DEBUG] transformed Y92Md.SPC -> Y92MD.SPC
[sigmove 04:58:18 DEBUG] transformed Y92Me.SPC -> Y92ME.SPC
[sigmove 04:58:18 DEBUG] transformed Y92Mf.SPC -> Y92MF.SPC
[Status 04:58:18 INFO] data for Y92 transferred to science data processing
[Tidy 04:58:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:58:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:58:18 INFO] resetting WatchDogTimer
[Status 04:58:18 INFO] Starting Set [AERI set: name Z92, 6 scans, 0 angle, D16300 command]
[Ingest 04:58:18 INFO] Sending XML status message
[Status 04:58:18 INFO] Mirror angle: 0
[Mirror 04:58:18 INFO] rotating to position Z
[Status 04:58:18 INFO] .SET file for ACQ96 ready
[Ingest 04:58:18 INFO] Starting acquisition
[Status 04:58:18 INFO] reading housekeeping
[Status 04:58:36 INFO] acquire complete
[Status 04:58:37 INFO] writing housekeeping
[Sequencer 04:58:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:58:37 INFO] incremented Z scene to 92 completed views
[Sequencer 04:58:37 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 04:58:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:58:37 INFO] incremented to [AERI set: name H93, 6 scans, 60 angle, D22500 command] set
[sigmove 04:58:37 INFO] Z92.SIG(18)
[sigmove 04:58:37 DEBUG] transformed Z92Ma.SPC -> Z92MA.SPC
[sigmove 04:58:37 DEBUG] transformed Z92Mb.SPC -> Z92MB.SPC
[sigmove 04:58:37 DEBUG] transformed Z92Mc.SPC -> Z92MC.SPC
[sigmove 04:58:37 DEBUG] transformed Z92Md.SPC -> Z92MD.SPC
[sigmove 04:58:37 DEBUG] transformed Z92Me.SPC -> Z92ME.SPC
[sigmove 04:58:37 DEBUG] transformed Z92Mf.SPC -> Z92MF.SPC
[Status 04:58:37 INFO] data for Z92 transferred to science data processing
[Tidy 04:58:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:58:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:58:37 INFO] resetting WatchDogTimer
[Status 04:58:37 INFO] Starting Set [AERI set: name H93, 6 scans, 60 angle, D22500 command]
[Ingest 04:58:37 INFO] Sending XML status message
[Status 04:58:37 INFO] Mirror angle: 60
[Mirror 04:58:37 INFO] rotating to position H
[Status 04:58:38 INFO] .SET file for ACQ96 ready
[Ingest 04:58:38 INFO] Starting acquisition
[Status 04:58:38 INFO] reading housekeeping
[Status 04:58:56 INFO] acquire complete
[Status 04:58:57 INFO] writing housekeeping
[Sequencer 04:58:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:58:57 INFO] incremented H scene to 93 completed views
[Sequencer 04:58:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 04:58:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:58:57 INFO] incremented to [AERI set: name A93, 6 scans, 120 angle, D28300 command] set
[sigmove 04:58:57 INFO] H93.SIG(18)
[sigmove 04:58:57 DEBUG] transformed H93Ma.SPC -> H93MA.SPC
[sigmove 04:58:57 DEBUG] transformed H93Mb.SPC -> H93MB.SPC
[sigmove 04:58:57 DEBUG] transformed H93Mc.SPC -> H93MC.SPC
[sigmove 04:58:57 DEBUG] transformed H93Md.SPC -> H93MD.SPC
[sigmove 04:58:57 DEBUG] transformed H93Me.SPC -> H93ME.SPC
[sigmove 04:58:57 DEBUG] transformed H93Mf.SPC -> H93MF.SPC
[Status 04:58:57 INFO] data for H93 transferred to science data processing
[Tidy 04:58:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:58:57 INFO] A91.FIN(19),H91.FIN(19),S91.FIN(19),T91.FIN(19),U91.FIN(19),V91.FIN(19),W91.FIN(19),X91.FIN(19),Y91.FIN(19),Z91.FIN(19),A92.FIN(19),H92.FIN(19),S92.FIN(19),T92.FIN(19),U92.FIN(19),V92.FIN(19),W92.FIN(19),X92.FIN(19),Y92.FIN(19),Z92.FIN(19)
[sigmove 04:58:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:58:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 04:58:59 DEBUG] done zipping
[WatchDog 04:58:59 INFO] resetting WatchDogTimer
[Status 04:58:59 INFO] Starting Set [AERI set: name A93, 6 scans, 120 angle, D28300 command]
[Ingest 04:58:59 INFO] Sending XML status message
[Status 04:58:59 INFO] Mirror angle: 120
[Mirror 04:58:59 INFO] rotating to position A
[Status 04:59:00 INFO] .SET file for ACQ96 ready
[Ingest 04:59:00 INFO] Starting acquisition
[Status 04:59:00 INFO] reading housekeeping
[Status 04:59:18 INFO] acquire complete
[Status 04:59:18 INFO] writing housekeeping
[Sequencer 04:59:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:59:18 INFO] incremented A scene to 93 completed views
[Sequencer 04:59:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 04:59:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:59:18 INFO] incremented to [AERI set: name S93, 6 scans, 0 angle, D16300 command] set
[sigmove 04:59:18 INFO] A93.SIG(18)
[sigmove 04:59:18 DEBUG] transformed A93Ma.SPC -> A93MA.SPC
[sigmove 04:59:18 DEBUG] transformed A93Mb.SPC -> A93MB.SPC
[sigmove 04:59:18 DEBUG] transformed A93Mc.SPC -> A93MC.SPC
[sigmove 04:59:18 DEBUG] transformed A93Md.SPC -> A93MD.SPC
[sigmove 04:59:18 DEBUG] transformed A93Me.SPC -> A93ME.SPC
[sigmove 04:59:18 DEBUG] transformed A93Mf.SPC -> A93MF.SPC
[Status 04:59:18 INFO] data for A93 transferred to science data processing
[Tidy 04:59:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:59:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:59:18 INFO] resetting WatchDogTimer
[Status 04:59:18 INFO] Starting Set [AERI set: name S93, 6 scans, 0 angle, D16300 command]
[Ingest 04:59:18 INFO] Sending XML status message
[Status 04:59:18 INFO] Mirror angle: 0
[Mirror 04:59:19 INFO] rotating to position S
[Status 04:59:20 INFO] .SET file for ACQ96 ready
[Ingest 04:59:20 INFO] Starting acquisition
[Status 04:59:20 INFO] reading housekeeping
[Status 04:59:38 INFO] acquire complete
[Status 04:59:38 INFO] writing housekeeping
[Sequencer 04:59:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:59:38 INFO] incremented S scene to 93 completed views
[Sequencer 04:59:38 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:59:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:59:38 INFO] incremented to [AERI set: name T93, 6 scans, 0 angle, D16300 command] set
[sigmove 04:59:38 INFO] S93.SIG(18)
[sigmove 04:59:38 DEBUG] transformed S93Ma.SPC -> S93MA.SPC
[sigmove 04:59:38 DEBUG] transformed S93Mb.SPC -> S93MB.SPC
[sigmove 04:59:38 DEBUG] transformed S93Mc.SPC -> S93MC.SPC
[sigmove 04:59:38 DEBUG] transformed S93Md.SPC -> S93MD.SPC
[sigmove 04:59:38 DEBUG] transformed S93Me.SPC -> S93ME.SPC
[sigmove 04:59:38 DEBUG] transformed S93Mf.SPC -> S93MF.SPC
[Status 04:59:38 INFO] data for S93 transferred to science data processing
[Tidy 04:59:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:59:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:59:38 INFO] resetting WatchDogTimer
[Status 04:59:39 INFO] Starting Set [AERI set: name T93, 6 scans, 0 angle, D16300 command]
[Ingest 04:59:39 INFO] Sending XML status message
[Status 04:59:39 INFO] Mirror angle: 0
[Mirror 04:59:39 INFO] rotating to position T
[Status 04:59:39 INFO] .SET file for ACQ96 ready
[Ingest 04:59:39 INFO] Starting acquisition
[Status 04:59:39 INFO] reading housekeeping
[Status 04:59:57 INFO] acquire complete
[Status 04:59:58 INFO] writing housekeeping
[Sequencer 04:59:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 04:59:58 INFO] incremented T scene to 93 completed views
[Sequencer 04:59:58 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 04:59:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 04:59:58 INFO] incremented to [AERI set: name U93, 6 scans, 0 angle, D16300 command] set
[sigmove 04:59:58 INFO] T93.SIG(18)
[sigmove 04:59:58 DEBUG] transformed T93Ma.SPC -> T93MA.SPC
[sigmove 04:59:58 DEBUG] transformed T93Mb.SPC -> T93MB.SPC
[sigmove 04:59:58 DEBUG] transformed T93Mc.SPC -> T93MC.SPC
[sigmove 04:59:58 DEBUG] transformed T93Md.SPC -> T93MD.SPC
[sigmove 04:59:58 DEBUG] transformed T93Me.SPC -> T93ME.SPC
[sigmove 04:59:58 DEBUG] transformed T93Mf.SPC -> T93MF.SPC
[Status 04:59:58 INFO] data for T93 transferred to science data processing
[Tidy 04:59:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 04:59:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 04:59:58 INFO] resetting WatchDogTimer
[Status 04:59:58 INFO] Starting Set [AERI set: name U93, 6 scans, 0 angle, D16300 command]
[Ingest 04:59:58 INFO] Sending XML status message
[Status 04:59:58 INFO] Mirror angle: 0
[Mirror 04:59:58 INFO] rotating to position U
[Status 04:59:58 INFO] .SET file for ACQ96 ready
[Ingest 04:59:58 INFO] Starting acquisition
[Status 04:59:58 INFO] reading housekeeping
[Status 05:00:16 INFO] acquire complete
[Status 05:00:17 INFO] writing housekeeping
[Sequencer 05:00:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:00:17 INFO] incremented U scene to 93 completed views
[Sequencer 05:00:17 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:00:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:00:17 INFO] incremented to [AERI set: name V93, 6 scans, 0 angle, D16300 command] set
[sigmove 05:00:17 INFO] U93.SIG(18)
[sigmove 05:00:17 DEBUG] transformed U93Ma.SPC -> U93MA.SPC
[sigmove 05:00:17 DEBUG] transformed U93Mb.SPC -> U93MB.SPC
[sigmove 05:00:17 DEBUG] transformed U93Mc.SPC -> U93MC.SPC
[sigmove 05:00:17 DEBUG] transformed U93Md.SPC -> U93MD.SPC
[sigmove 05:00:17 DEBUG] transformed U93Me.SPC -> U93ME.SPC
[sigmove 05:00:17 DEBUG] transformed U93Mf.SPC -> U93MF.SPC
[Status 05:00:17 INFO] data for U93 transferred to science data processing
[Tidy 05:00:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:00:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:00:17 INFO] resetting WatchDogTimer
[Status 05:00:17 INFO] Starting Set [AERI set: name V93, 6 scans, 0 angle, D16300 command]
[Ingest 05:00:17 INFO] Sending XML status message
[Status 05:00:17 INFO] Mirror angle: 0
[Mirror 05:00:17 INFO] rotating to position V
[Status 05:00:17 INFO] .SET file for ACQ96 ready
[Ingest 05:00:17 INFO] Starting acquisition
[Status 05:00:17 INFO] reading housekeeping
[Status 05:00:35 INFO] acquire complete
[Status 05:00:36 INFO] writing housekeeping
[Sequencer 05:00:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:00:36 INFO] incremented V scene to 93 completed views
[Sequencer 05:00:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:00:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:00:36 INFO] incremented to [AERI set: name W93, 6 scans, 0 angle, D16300 command] set
[sigmove 05:00:36 INFO] V93.SIG(18)
[sigmove 05:00:36 DEBUG] transformed V93Ma.SPC -> V93MA.SPC
[sigmove 05:00:36 DEBUG] transformed V93Mb.SPC -> V93MB.SPC
[sigmove 05:00:36 DEBUG] transformed V93Mc.SPC -> V93MC.SPC
[sigmove 05:00:36 DEBUG] transformed V93Md.SPC -> V93MD.SPC
[sigmove 05:00:36 DEBUG] transformed V93Me.SPC -> V93ME.SPC
[sigmove 05:00:36 DEBUG] transformed V93Mf.SPC -> V93MF.SPC
[Status 05:00:36 INFO] data for V93 transferred to science data processing
[Tidy 05:00:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:00:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:00:36 INFO] resetting WatchDogTimer
[Status 05:00:36 INFO] Starting Set [AERI set: name W93, 6 scans, 0 angle, D16300 command]
[Ingest 05:00:36 INFO] Sending XML status message
[Status 05:00:36 INFO] Mirror angle: 0
[Mirror 05:00:36 INFO] rotating to position W
[Status 05:00:36 INFO] .SET file for ACQ96 ready
[Ingest 05:00:36 INFO] Starting acquisition
[Status 05:00:37 INFO] reading housekeeping
[Status 05:00:54 INFO] acquire complete
[Status 05:00:55 INFO] writing housekeeping
[Sequencer 05:00:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:00:55 INFO] incremented W scene to 93 completed views
[Sequencer 05:00:55 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:00:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:00:55 INFO] incremented to [AERI set: name X93, 6 scans, 0 angle, D16300 command] set
[sigmove 05:00:55 INFO] W93.SIG(18)
[sigmove 05:00:55 DEBUG] transformed W93Ma.SPC -> W93MA.SPC
[sigmove 05:00:55 DEBUG] transformed W93Mb.SPC -> W93MB.SPC
[sigmove 05:00:55 DEBUG] transformed W93Mc.SPC -> W93MC.SPC
[sigmove 05:00:55 DEBUG] transformed W93Md.SPC -> W93MD.SPC
[sigmove 05:00:55 DEBUG] transformed W93Me.SPC -> W93ME.SPC
[sigmove 05:00:55 DEBUG] transformed W93Mf.SPC -> W93MF.SPC
[Status 05:00:55 INFO] data for W93 transferred to science data processing
[Tidy 05:00:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:00:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:00:55 INFO] resetting WatchDogTimer
[Status 05:00:55 INFO] Starting Set [AERI set: name X93, 6 scans, 0 angle, D16300 command]
[Ingest 05:00:55 INFO] Sending XML status message
[Status 05:00:55 INFO] Mirror angle: 0
[Mirror 05:00:55 INFO] rotating to position X
[Status 05:00:55 INFO] .SET file for ACQ96 ready
[Ingest 05:00:55 INFO] Starting acquisition
[Status 05:00:56 INFO] reading housekeeping
[Status 05:01:13 INFO] acquire complete
[Status 05:01:14 INFO] writing housekeeping
[Sequencer 05:01:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:01:14 INFO] incremented X scene to 93 completed views
[Sequencer 05:01:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:01:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:01:14 INFO] incremented to [AERI set: name Y93, 6 scans, 0 angle, D16300 command] set
[sigmove 05:01:14 INFO] X93.SIG(18)
[sigmove 05:01:14 DEBUG] transformed X93Ma.SPC -> X93MA.SPC
[sigmove 05:01:14 DEBUG] transformed X93Mb.SPC -> X93MB.SPC
[sigmove 05:01:14 DEBUG] transformed X93Mc.SPC -> X93MC.SPC
[sigmove 05:01:14 DEBUG] transformed X93Md.SPC -> X93MD.SPC
[sigmove 05:01:14 DEBUG] transformed X93Me.SPC -> X93ME.SPC
[sigmove 05:01:14 DEBUG] transformed X93Mf.SPC -> X93MF.SPC
[Status 05:01:14 INFO] data for X93 transferred to science data processing
[Tidy 05:01:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:01:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:01:14 INFO] resetting WatchDogTimer
[Status 05:01:14 INFO] Starting Set [AERI set: name Y93, 6 scans, 0 angle, D16300 command]
[Ingest 05:01:14 INFO] Sending XML status message
[Status 05:01:14 INFO] Mirror angle: 0
[Mirror 05:01:14 INFO] rotating to position Y
[Status 05:01:14 INFO] .SET file for ACQ96 ready
[Ingest 05:01:15 INFO] Starting acquisition
[Status 05:01:15 INFO] reading housekeeping
[Status 05:01:32 INFO] acquire complete
[Status 05:01:33 INFO] writing housekeeping
[Sequencer 05:01:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:01:33 INFO] incremented Y scene to 93 completed views
[Sequencer 05:01:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:01:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:01:33 INFO] incremented to [AERI set: name Z93, 6 scans, 0 angle, D16300 command] set
[sigmove 05:01:33 INFO] Y93.SIG(18)
[sigmove 05:01:33 DEBUG] transformed Y93Ma.SPC -> Y93MA.SPC
[sigmove 05:01:33 DEBUG] transformed Y93Mb.SPC -> Y93MB.SPC
[sigmove 05:01:33 DEBUG] transformed Y93Mc.SPC -> Y93MC.SPC
[sigmove 05:01:33 DEBUG] transformed Y93Md.SPC -> Y93MD.SPC
[sigmove 05:01:33 DEBUG] transformed Y93Me.SPC -> Y93ME.SPC
[sigmove 05:01:33 DEBUG] transformed Y93Mf.SPC -> Y93MF.SPC
[Status 05:01:33 INFO] data for Y93 transferred to science data processing
[Tidy 05:01:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:01:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:01:33 INFO] resetting WatchDogTimer
[Status 05:01:33 INFO] Starting Set [AERI set: name Z93, 6 scans, 0 angle, D16300 command]
[Ingest 05:01:33 INFO] Sending XML status message
[Status 05:01:33 INFO] Mirror angle: 0
[Mirror 05:01:33 INFO] rotating to position Z
[Status 05:01:33 INFO] .SET file for ACQ96 ready
[Ingest 05:01:34 INFO] Starting acquisition
[Status 05:01:34 INFO] reading housekeeping
[Status 05:01:52 INFO] acquire complete
[Status 05:01:52 INFO] writing housekeeping
[Sequencer 05:01:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:01:52 INFO] incremented Z scene to 93 completed views
[Sequencer 05:01:52 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:01:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:01:52 INFO] incremented to [AERI set: name A94, 6 scans, 120 angle, D28300 command] set
[sigmove 05:01:52 INFO] Z93.SIG(18)
[sigmove 05:01:52 DEBUG] transformed Z93Ma.SPC -> Z93MA.SPC
[sigmove 05:01:52 DEBUG] transformed Z93Mb.SPC -> Z93MB.SPC
[sigmove 05:01:52 DEBUG] transformed Z93Mc.SPC -> Z93MC.SPC
[sigmove 05:01:52 DEBUG] transformed Z93Md.SPC -> Z93MD.SPC
[sigmove 05:01:52 DEBUG] transformed Z93Me.SPC -> Z93ME.SPC
[sigmove 05:01:52 DEBUG] transformed Z93Mf.SPC -> Z93MF.SPC
[Status 05:01:52 INFO] data for Z93 transferred to science data processing
[Tidy 05:01:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:01:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:01:52 INFO] resetting WatchDogTimer
[Status 05:01:52 INFO] Starting Set [AERI set: name A94, 6 scans, 120 angle, D28300 command]
[Ingest 05:01:52 INFO] Sending XML status message
[Status 05:01:52 INFO] Mirror angle: 120
[Mirror 05:01:52 INFO] rotating to position A
[Status 05:01:54 INFO] .SET file for ACQ96 ready
[Ingest 05:01:54 INFO] Starting acquisition
[Status 05:01:54 INFO] reading housekeeping
[Status 05:02:12 INFO] acquire complete
[Status 05:02:12 INFO] writing housekeeping
[Sequencer 05:02:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:02:12 INFO] incremented A scene to 94 completed views
[Sequencer 05:02:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:02:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:02:12 INFO] incremented to [AERI set: name H94, 6 scans, 60 angle, D22500 command] set
[sigmove 05:02:12 INFO] A94.SIG(18)
[sigmove 05:02:12 DEBUG] transformed A94Ma.SPC -> A94MA.SPC
[sigmove 05:02:12 DEBUG] transformed A94Mb.SPC -> A94MB.SPC
[sigmove 05:02:12 DEBUG] transformed A94Mc.SPC -> A94MC.SPC
[sigmove 05:02:12 DEBUG] transformed A94Md.SPC -> A94MD.SPC
[sigmove 05:02:12 DEBUG] transformed A94Me.SPC -> A94ME.SPC
[sigmove 05:02:12 DEBUG] transformed A94Mf.SPC -> A94MF.SPC
[Status 05:02:12 INFO] data for A94 transferred to science data processing
[Tidy 05:02:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:02:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:02:12 INFO] resetting WatchDogTimer
[Status 05:02:12 INFO] Starting Set [AERI set: name H94, 6 scans, 60 angle, D22500 command]
[Ingest 05:02:12 INFO] Sending XML status message
[Status 05:02:12 INFO] Mirror angle: 60
[Mirror 05:02:13 INFO] rotating to position H
[Status 05:02:13 INFO] .SET file for ACQ96 ready
[Ingest 05:02:13 INFO] Starting acquisition
[Status 05:02:14 INFO] reading housekeeping
[Status 05:02:32 INFO] acquire complete
[Status 05:02:32 INFO] writing housekeeping
[Sequencer 05:02:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:02:32 INFO] incremented H scene to 94 completed views
[Sequencer 05:02:32 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:02:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:02:32 INFO] incremented to [AERI set: name S94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:02:32 INFO] H94.SIG(18)
[sigmove 05:02:32 DEBUG] transformed H94Ma.SPC -> H94MA.SPC
[sigmove 05:02:32 DEBUG] transformed H94Mb.SPC -> H94MB.SPC
[sigmove 05:02:32 DEBUG] transformed H94Mc.SPC -> H94MC.SPC
[sigmove 05:02:32 DEBUG] transformed H94Md.SPC -> H94MD.SPC
[sigmove 05:02:32 DEBUG] transformed H94Me.SPC -> H94ME.SPC
[sigmove 05:02:32 DEBUG] transformed H94Mf.SPC -> H94MF.SPC
[Status 05:02:32 INFO] data for H94 transferred to science data processing
[Tidy 05:02:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:02:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:02:32 INFO] resetting WatchDogTimer
[Status 05:02:33 INFO] Starting Set [AERI set: name S94, 6 scans, 0 angle, D16300 command]
[Ingest 05:02:33 INFO] Sending XML status message
[Status 05:02:33 INFO] Mirror angle: 0
[Mirror 05:02:33 INFO] rotating to position S
[Status 05:02:34 INFO] .SET file for ACQ96 ready
[Ingest 05:02:34 INFO] Starting acquisition
[Status 05:02:34 INFO] reading housekeeping
[Status 05:02:52 INFO] acquire complete
[Status 05:02:53 INFO] writing housekeeping
[Sequencer 05:02:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:02:53 INFO] incremented S scene to 94 completed views
[Sequencer 05:02:53 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:02:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:02:53 INFO] incremented to [AERI set: name T94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:02:53 INFO] S94.SIG(18)
[sigmove 05:02:53 DEBUG] transformed S94Ma.SPC -> S94MA.SPC
[sigmove 05:02:53 DEBUG] transformed S94Mb.SPC -> S94MB.SPC
[sigmove 05:02:53 DEBUG] transformed S94Mc.SPC -> S94MC.SPC
[sigmove 05:02:53 DEBUG] transformed S94Md.SPC -> S94MD.SPC
[sigmove 05:02:53 DEBUG] transformed S94Me.SPC -> S94ME.SPC
[sigmove 05:02:53 DEBUG] transformed S94Mf.SPC -> S94MF.SPC
[Status 05:02:53 INFO] data for S94 transferred to science data processing
[Tidy 05:02:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:02:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:02:53 INFO] resetting WatchDogTimer
[Status 05:02:53 INFO] Starting Set [AERI set: name T94, 6 scans, 0 angle, D16300 command]
[Ingest 05:02:53 INFO] Sending XML status message
[Status 05:02:53 INFO] Mirror angle: 0
[Mirror 05:02:53 INFO] rotating to position T
[Status 05:02:53 INFO] .SET file for ACQ96 ready
[Ingest 05:02:53 INFO] Starting acquisition
[Status 05:02:53 INFO] reading housekeeping
[Status 05:03:11 INFO] acquire complete
[Status 05:03:12 INFO] writing housekeeping
[Sequencer 05:03:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:03:12 INFO] incremented T scene to 94 completed views
[Sequencer 05:03:12 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:03:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:03:12 INFO] incremented to [AERI set: name U94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:03:12 INFO] T94.SIG(18)
[sigmove 05:03:12 DEBUG] transformed T94Ma.SPC -> T94MA.SPC
[sigmove 05:03:12 DEBUG] transformed T94Mb.SPC -> T94MB.SPC
[sigmove 05:03:12 DEBUG] transformed T94Mc.SPC -> T94MC.SPC
[sigmove 05:03:12 DEBUG] transformed T94Md.SPC -> T94MD.SPC
[sigmove 05:03:12 DEBUG] transformed T94Me.SPC -> T94ME.SPC
[sigmove 05:03:12 DEBUG] transformed T94Mf.SPC -> T94MF.SPC
[Status 05:03:12 INFO] data for T94 transferred to science data processing
[Tidy 05:03:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:03:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:03:12 INFO] resetting WatchDogTimer
[Status 05:03:12 INFO] Starting Set [AERI set: name U94, 6 scans, 0 angle, D16300 command]
[Ingest 05:03:12 INFO] Sending XML status message
[Status 05:03:12 INFO] Mirror angle: 0
[Mirror 05:03:12 INFO] rotating to position U
[Status 05:03:12 INFO] .SET file for ACQ96 ready
[Ingest 05:03:12 INFO] Starting acquisition
[Status 05:03:13 INFO] reading housekeeping
[Status 05:03:30 INFO] acquire complete
[Status 05:03:31 INFO] writing housekeeping
[Sequencer 05:03:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:03:31 INFO] incremented U scene to 94 completed views
[Sequencer 05:03:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:03:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:03:31 INFO] incremented to [AERI set: name V94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:03:31 INFO] U94.SIG(18)
[sigmove 05:03:31 DEBUG] transformed U94Ma.SPC -> U94MA.SPC
[sigmove 05:03:31 DEBUG] transformed U94Mb.SPC -> U94MB.SPC
[sigmove 05:03:31 DEBUG] transformed U94Mc.SPC -> U94MC.SPC
[sigmove 05:03:31 DEBUG] transformed U94Md.SPC -> U94MD.SPC
[sigmove 05:03:31 DEBUG] transformed U94Me.SPC -> U94ME.SPC
[sigmove 05:03:31 DEBUG] transformed U94Mf.SPC -> U94MF.SPC
[Status 05:03:31 INFO] data for U94 transferred to science data processing
[Tidy 05:03:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:03:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:03:31 INFO] resetting WatchDogTimer
[Status 05:03:31 INFO] Starting Set [AERI set: name V94, 6 scans, 0 angle, D16300 command]
[Ingest 05:03:31 INFO] Sending XML status message
[Status 05:03:31 INFO] Mirror angle: 0
[Mirror 05:03:31 INFO] rotating to position V
[Status 05:03:31 INFO] .SET file for ACQ96 ready
[Ingest 05:03:31 INFO] Starting acquisition
[Status 05:03:32 INFO] reading housekeeping
[Status 05:03:49 INFO] acquire complete
[Status 05:03:50 INFO] writing housekeeping
[Sequencer 05:03:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:03:50 INFO] incremented V scene to 94 completed views
[Sequencer 05:03:50 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:03:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:03:50 INFO] incremented to [AERI set: name W94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:03:50 INFO] V94.SIG(18)
[sigmove 05:03:50 DEBUG] transformed V94Ma.SPC -> V94MA.SPC
[sigmove 05:03:50 DEBUG] transformed V94Mb.SPC -> V94MB.SPC
[sigmove 05:03:50 DEBUG] transformed V94Mc.SPC -> V94MC.SPC
[sigmove 05:03:50 DEBUG] transformed V94Md.SPC -> V94MD.SPC
[sigmove 05:03:50 DEBUG] transformed V94Me.SPC -> V94ME.SPC
[sigmove 05:03:50 DEBUG] transformed V94Mf.SPC -> V94MF.SPC
[Status 05:03:50 INFO] data for V94 transferred to science data processing
[Tidy 05:03:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:03:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:03:50 INFO] resetting WatchDogTimer
[Status 05:03:50 INFO] Starting Set [AERI set: name W94, 6 scans, 0 angle, D16300 command]
[Ingest 05:03:50 INFO] Sending XML status message
[Status 05:03:50 INFO] Mirror angle: 0
[Mirror 05:03:50 INFO] rotating to position W
[Status 05:03:50 INFO] .SET file for ACQ96 ready
[Ingest 05:03:51 INFO] Starting acquisition
[Status 05:03:51 INFO] reading housekeeping
[Status 05:04:09 INFO] acquire complete
[Status 05:04:09 INFO] writing housekeeping
[Sequencer 05:04:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:04:09 INFO] incremented W scene to 94 completed views
[Sequencer 05:04:09 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:04:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:04:09 INFO] incremented to [AERI set: name X94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:04:09 INFO] W94.SIG(18)
[sigmove 05:04:09 DEBUG] transformed W94Ma.SPC -> W94MA.SPC
[sigmove 05:04:09 DEBUG] transformed W94Mb.SPC -> W94MB.SPC
[sigmove 05:04:09 DEBUG] transformed W94Mc.SPC -> W94MC.SPC
[sigmove 05:04:09 DEBUG] transformed W94Md.SPC -> W94MD.SPC
[sigmove 05:04:09 DEBUG] transformed W94Me.SPC -> W94ME.SPC
[sigmove 05:04:09 DEBUG] transformed W94Mf.SPC -> W94MF.SPC
[Status 05:04:09 INFO] data for W94 transferred to science data processing
[Tidy 05:04:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:04:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:04:09 INFO] resetting WatchDogTimer
[Status 05:04:09 INFO] Starting Set [AERI set: name X94, 6 scans, 0 angle, D16300 command]
[Ingest 05:04:09 INFO] Sending XML status message
[Status 05:04:09 INFO] Mirror angle: 0
[Mirror 05:04:09 INFO] rotating to position X
[Status 05:04:10 INFO] .SET file for ACQ96 ready
[Ingest 05:04:10 INFO] Starting acquisition
[Status 05:04:10 INFO] reading housekeeping
[Status 05:04:28 INFO] acquire complete
[Status 05:04:28 INFO] writing housekeeping
[Sequencer 05:04:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:04:28 INFO] incremented X scene to 94 completed views
[Sequencer 05:04:28 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:04:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:04:28 INFO] incremented to [AERI set: name Y94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:04:28 INFO] X94.SIG(18)
[sigmove 05:04:28 DEBUG] transformed X94Ma.SPC -> X94MA.SPC
[sigmove 05:04:28 DEBUG] transformed X94Mb.SPC -> X94MB.SPC
[sigmove 05:04:28 DEBUG] transformed X94Mc.SPC -> X94MC.SPC
[sigmove 05:04:28 DEBUG] transformed X94Md.SPC -> X94MD.SPC
[sigmove 05:04:28 DEBUG] transformed X94Me.SPC -> X94ME.SPC
[sigmove 05:04:28 DEBUG] transformed X94Mf.SPC -> X94MF.SPC
[Status 05:04:28 INFO] data for X94 transferred to science data processing
[Tidy 05:04:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:04:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:04:28 INFO] resetting WatchDogTimer
[Status 05:04:28 INFO] Starting Set [AERI set: name Y94, 6 scans, 0 angle, D16300 command]
[Ingest 05:04:28 INFO] Sending XML status message
[Status 05:04:28 INFO] Mirror angle: 0
[Mirror 05:04:28 INFO] rotating to position Y
[Status 05:04:29 INFO] .SET file for ACQ96 ready
[Ingest 05:04:29 INFO] Starting acquisition
[Status 05:04:29 INFO] reading housekeeping
[Status 05:04:47 INFO] acquire complete
[Status 05:04:47 INFO] writing housekeeping
[Sequencer 05:04:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:04:47 INFO] incremented Y scene to 94 completed views
[Sequencer 05:04:47 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:04:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:04:47 INFO] incremented to [AERI set: name Z94, 6 scans, 0 angle, D16300 command] set
[sigmove 05:04:47 INFO] Y94.SIG(18)
[sigmove 05:04:47 DEBUG] transformed Y94Ma.SPC -> Y94MA.SPC
[sigmove 05:04:47 DEBUG] transformed Y94Mb.SPC -> Y94MB.SPC
[sigmove 05:04:47 DEBUG] transformed Y94Mc.SPC -> Y94MC.SPC
[sigmove 05:04:47 DEBUG] transformed Y94Md.SPC -> Y94MD.SPC
[sigmove 05:04:47 DEBUG] transformed Y94Me.SPC -> Y94ME.SPC
[sigmove 05:04:47 DEBUG] transformed Y94Mf.SPC -> Y94MF.SPC
[Status 05:04:47 INFO] data for Y94 transferred to science data processing
[Tidy 05:04:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:04:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:04:47 INFO] resetting WatchDogTimer
[Status 05:04:47 INFO] Starting Set [AERI set: name Z94, 6 scans, 0 angle, D16300 command]
[Ingest 05:04:47 INFO] Sending XML status message
[Status 05:04:47 INFO] Mirror angle: 0
[Mirror 05:04:47 INFO] rotating to position Z
[Status 05:04:48 INFO] .SET file for ACQ96 ready
[Ingest 05:04:48 INFO] Starting acquisition
[Status 05:04:48 INFO] reading housekeeping
[Status 05:05:06 INFO] acquire complete
[Status 05:05:06 INFO] writing housekeeping
[Sequencer 05:05:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:05:06 INFO] incremented Z scene to 94 completed views
[Sequencer 05:05:06 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:05:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:05:06 INFO] incremented to [AERI set: name H95, 6 scans, 60 angle, D22500 command] set
[sigmove 05:05:06 INFO] Z94.SIG(18)
[sigmove 05:05:06 DEBUG] transformed Z94Ma.SPC -> Z94MA.SPC
[sigmove 05:05:06 DEBUG] transformed Z94Mb.SPC -> Z94MB.SPC
[sigmove 05:05:06 DEBUG] transformed Z94Mc.SPC -> Z94MC.SPC
[sigmove 05:05:06 DEBUG] transformed Z94Md.SPC -> Z94MD.SPC
[sigmove 05:05:06 DEBUG] transformed Z94Me.SPC -> Z94ME.SPC
[sigmove 05:05:06 DEBUG] transformed Z94Mf.SPC -> Z94MF.SPC
[Status 05:05:06 INFO] data for Z94 transferred to science data processing
[Tidy 05:05:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:05:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:05:06 INFO] resetting WatchDogTimer
[Status 05:05:06 INFO] Starting Set [AERI set: name H95, 6 scans, 60 angle, D22500 command]
[Ingest 05:05:06 INFO] Sending XML status message
[Status 05:05:06 INFO] Mirror angle: 60
[Mirror 05:05:07 INFO] rotating to position H
[Status 05:05:07 INFO] .SET file for ACQ96 ready
[Ingest 05:05:07 INFO] Starting acquisition
[Status 05:05:08 INFO] reading housekeeping
[Status 05:05:26 INFO] acquire complete
[Status 05:05:26 INFO] writing housekeeping
[Sequencer 05:05:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:05:26 INFO] incremented H scene to 95 completed views
[Sequencer 05:05:26 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:05:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:05:26 INFO] incremented to [AERI set: name A95, 6 scans, 120 angle, D28300 command] set
[sigmove 05:05:26 INFO] H95.SIG(18)
[sigmove 05:05:26 DEBUG] transformed H95Ma.SPC -> H95MA.SPC
[sigmove 05:05:26 DEBUG] transformed H95Mb.SPC -> H95MB.SPC
[sigmove 05:05:26 DEBUG] transformed H95Mc.SPC -> H95MC.SPC
[sigmove 05:05:26 DEBUG] transformed H95Md.SPC -> H95MD.SPC
[sigmove 05:05:26 DEBUG] transformed H95Me.SPC -> H95ME.SPC
[sigmove 05:05:26 DEBUG] transformed H95Mf.SPC -> H95MF.SPC
[Status 05:05:26 INFO] data for H95 transferred to science data processing
[Tidy 05:05:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:05:27 INFO] A93.FIN(19),H93.FIN(19),S93.FIN(19),T93.FIN(19),U93.FIN(19),V93.FIN(19),W93.FIN(19),X93.FIN(19),Y93.FIN(19),Z93.FIN(19),A94.FIN(19),H94.FIN(19),S94.FIN(19),T94.FIN(19),U94.FIN(19),V94.FIN(19),W94.FIN(19),X94.FIN(19),Y94.FIN(19),Z94.FIN(19)
[sigmove 05:05:27 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:05:27 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:05:28 DEBUG] done zipping
[WatchDog 05:05:28 INFO] resetting WatchDogTimer
[Status 05:05:29 INFO] Starting Set [AERI set: name A95, 6 scans, 120 angle, D28300 command]
[Ingest 05:05:29 INFO] Sending XML status message
[Status 05:05:29 INFO] Mirror angle: 120
[Mirror 05:05:29 INFO] rotating to position A
[Status 05:05:29 INFO] .SET file for ACQ96 ready
[Ingest 05:05:30 INFO] Starting acquisition
[Status 05:05:30 INFO] reading housekeeping
[Status 05:05:47 INFO] acquire complete
[Status 05:05:48 INFO] writing housekeeping
[Sequencer 05:05:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:05:48 INFO] incremented A scene to 95 completed views
[Sequencer 05:05:48 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:05:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:05:48 INFO] incremented to [AERI set: name S95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:05:48 INFO] A95.SIG(18)
[sigmove 05:05:48 DEBUG] transformed A95Ma.SPC -> A95MA.SPC
[sigmove 05:05:48 DEBUG] transformed A95Mb.SPC -> A95MB.SPC
[sigmove 05:05:48 DEBUG] transformed A95Mc.SPC -> A95MC.SPC
[sigmove 05:05:48 DEBUG] transformed A95Md.SPC -> A95MD.SPC
[sigmove 05:05:48 DEBUG] transformed A95Me.SPC -> A95ME.SPC
[sigmove 05:05:48 DEBUG] transformed A95Mf.SPC -> A95MF.SPC
[Status 05:05:48 INFO] data for A95 transferred to science data processing
[Tidy 05:05:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:05:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:05:48 INFO] resetting WatchDogTimer
[Status 05:05:48 INFO] Starting Set [AERI set: name S95, 6 scans, 0 angle, D16300 command]
[Ingest 05:05:48 INFO] Sending XML status message
[Status 05:05:48 INFO] Mirror angle: 0
[Mirror 05:05:48 INFO] rotating to position S
[Status 05:05:49 INFO] .SET file for ACQ96 ready
[Ingest 05:05:50 INFO] Starting acquisition
[Status 05:05:50 INFO] reading housekeeping
[Status 05:06:07 INFO] acquire complete
[Status 05:06:08 INFO] writing housekeeping
[Sequencer 05:06:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:06:08 INFO] incremented S scene to 95 completed views
[Sequencer 05:06:08 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:06:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:06:08 INFO] incremented to [AERI set: name T95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:06:08 INFO] S95.SIG(18)
[sigmove 05:06:08 DEBUG] transformed S95Ma.SPC -> S95MA.SPC
[sigmove 05:06:08 DEBUG] transformed S95Mb.SPC -> S95MB.SPC
[sigmove 05:06:08 DEBUG] transformed S95Mc.SPC -> S95MC.SPC
[sigmove 05:06:08 DEBUG] transformed S95Md.SPC -> S95MD.SPC
[sigmove 05:06:08 DEBUG] transformed S95Me.SPC -> S95ME.SPC
[sigmove 05:06:08 DEBUG] transformed S95Mf.SPC -> S95MF.SPC
[Status 05:06:08 INFO] data for S95 transferred to science data processing
[Tidy 05:06:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:06:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:06:08 INFO] resetting WatchDogTimer
[Status 05:06:08 INFO] Starting Set [AERI set: name T95, 6 scans, 0 angle, D16300 command]
[Ingest 05:06:08 INFO] Sending XML status message
[Status 05:06:08 INFO] Mirror angle: 0
[Mirror 05:06:08 INFO] rotating to position T
[Status 05:06:09 INFO] .SET file for ACQ96 ready
[Ingest 05:06:09 INFO] Starting acquisition
[Status 05:06:09 INFO] reading housekeeping
[Status 05:06:27 INFO] acquire complete
[Status 05:06:27 INFO] writing housekeeping
[Sequencer 05:06:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:06:27 INFO] incremented T scene to 95 completed views
[Sequencer 05:06:27 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:06:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:06:27 INFO] incremented to [AERI set: name U95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:06:27 INFO] T95.SIG(18)
[sigmove 05:06:27 DEBUG] transformed T95Ma.SPC -> T95MA.SPC
[sigmove 05:06:27 DEBUG] transformed T95Mb.SPC -> T95MB.SPC
[sigmove 05:06:27 DEBUG] transformed T95Mc.SPC -> T95MC.SPC
[sigmove 05:06:27 DEBUG] transformed T95Md.SPC -> T95MD.SPC
[sigmove 05:06:27 DEBUG] transformed T95Me.SPC -> T95ME.SPC
[sigmove 05:06:27 DEBUG] transformed T95Mf.SPC -> T95MF.SPC
[Status 05:06:27 INFO] data for T95 transferred to science data processing
[Tidy 05:06:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:06:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:06:27 INFO] resetting WatchDogTimer
[Status 05:06:27 INFO] Starting Set [AERI set: name U95, 6 scans, 0 angle, D16300 command]
[Ingest 05:06:27 INFO] Sending XML status message
[Status 05:06:27 INFO] Mirror angle: 0
[Mirror 05:06:27 INFO] rotating to position U
[Status 05:06:28 INFO] .SET file for ACQ96 ready
[Ingest 05:06:28 INFO] Starting acquisition
[Status 05:06:28 INFO] reading housekeeping
[Status 05:06:46 INFO] acquire complete
[Status 05:06:46 INFO] writing housekeeping
[Sequencer 05:06:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:06:46 INFO] incremented U scene to 95 completed views
[Sequencer 05:06:46 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:06:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:06:46 INFO] incremented to [AERI set: name V95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:06:46 INFO] U95.SIG(18)
[sigmove 05:06:46 DEBUG] transformed U95Ma.SPC -> U95MA.SPC
[sigmove 05:06:46 DEBUG] transformed U95Mb.SPC -> U95MB.SPC
[sigmove 05:06:46 DEBUG] transformed U95Mc.SPC -> U95MC.SPC
[sigmove 05:06:46 DEBUG] transformed U95Md.SPC -> U95MD.SPC
[sigmove 05:06:46 DEBUG] transformed U95Me.SPC -> U95ME.SPC
[sigmove 05:06:46 DEBUG] transformed U95Mf.SPC -> U95MF.SPC
[Status 05:06:46 INFO] data for U95 transferred to science data processing
[Tidy 05:06:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:06:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:06:46 INFO] resetting WatchDogTimer
[Status 05:06:46 INFO] Starting Set [AERI set: name V95, 6 scans, 0 angle, D16300 command]
[Ingest 05:06:46 INFO] Sending XML status message
[Status 05:06:46 INFO] Mirror angle: 0
[Mirror 05:06:46 INFO] rotating to position V
[Status 05:06:47 INFO] .SET file for ACQ96 ready
[Ingest 05:06:47 INFO] Starting acquisition
[Status 05:06:47 INFO] reading housekeeping
[Status 05:07:05 INFO] acquire complete
[Status 05:07:05 INFO] writing housekeeping
[Sequencer 05:07:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:07:05 INFO] incremented V scene to 95 completed views
[Sequencer 05:07:05 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:07:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:07:05 INFO] incremented to [AERI set: name W95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:07:05 INFO] V95.SIG(18)
[sigmove 05:07:05 DEBUG] transformed V95Ma.SPC -> V95MA.SPC
[sigmove 05:07:05 DEBUG] transformed V95Mb.SPC -> V95MB.SPC
[sigmove 05:07:05 DEBUG] transformed V95Mc.SPC -> V95MC.SPC
[sigmove 05:07:05 DEBUG] transformed V95Md.SPC -> V95MD.SPC
[sigmove 05:07:05 DEBUG] transformed V95Me.SPC -> V95ME.SPC
[sigmove 05:07:05 DEBUG] transformed V95Mf.SPC -> V95MF.SPC
[Status 05:07:05 INFO] data for V95 transferred to science data processing
[Tidy 05:07:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:07:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:07:05 INFO] resetting WatchDogTimer
[Status 05:07:05 INFO] Starting Set [AERI set: name W95, 6 scans, 0 angle, D16300 command]
[Ingest 05:07:05 INFO] Sending XML status message
[Status 05:07:05 INFO] Mirror angle: 0
[Mirror 05:07:06 INFO] rotating to position W
[Status 05:07:06 INFO] .SET file for ACQ96 ready
[Ingest 05:07:06 INFO] Starting acquisition
[Status 05:07:06 INFO] reading housekeeping
[Status 05:07:24 INFO] acquire complete
[Status 05:07:24 INFO] writing housekeeping
[Sequencer 05:07:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:07:24 INFO] incremented W scene to 95 completed views
[Sequencer 05:07:24 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:07:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:07:24 INFO] incremented to [AERI set: name X95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:07:24 INFO] W95.SIG(18)
[sigmove 05:07:24 DEBUG] transformed W95Ma.SPC -> W95MA.SPC
[sigmove 05:07:24 DEBUG] transformed W95Mb.SPC -> W95MB.SPC
[sigmove 05:07:24 DEBUG] transformed W95Mc.SPC -> W95MC.SPC
[sigmove 05:07:24 DEBUG] transformed W95Md.SPC -> W95MD.SPC
[sigmove 05:07:24 DEBUG] transformed W95Me.SPC -> W95ME.SPC
[sigmove 05:07:24 DEBUG] transformed W95Mf.SPC -> W95MF.SPC
[Status 05:07:24 INFO] data for W95 transferred to science data processing
[Tidy 05:07:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:07:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:07:24 INFO] resetting WatchDogTimer
[Status 05:07:24 INFO] Starting Set [AERI set: name X95, 6 scans, 0 angle, D16300 command]
[Ingest 05:07:24 INFO] Sending XML status message
[Status 05:07:24 INFO] Mirror angle: 0
[Mirror 05:07:25 INFO] rotating to position X
[Status 05:07:25 INFO] .SET file for ACQ96 ready
[Ingest 05:07:25 INFO] Starting acquisition
[Status 05:07:25 INFO] reading housekeeping
[Status 05:07:43 INFO] acquire complete
[Status 05:07:43 INFO] writing housekeeping
[Sequencer 05:07:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:07:43 INFO] incremented X scene to 95 completed views
[Sequencer 05:07:43 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:07:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:07:43 INFO] incremented to [AERI set: name Y95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:07:43 INFO] X95.SIG(18)
[sigmove 05:07:43 DEBUG] transformed X95Ma.SPC -> X95MA.SPC
[sigmove 05:07:43 DEBUG] transformed X95Mb.SPC -> X95MB.SPC
[sigmove 05:07:43 DEBUG] transformed X95Mc.SPC -> X95MC.SPC
[sigmove 05:07:43 DEBUG] transformed X95Md.SPC -> X95MD.SPC
[sigmove 05:07:43 DEBUG] transformed X95Me.SPC -> X95ME.SPC
[sigmove 05:07:43 DEBUG] transformed X95Mf.SPC -> X95MF.SPC
[Status 05:07:43 INFO] data for X95 transferred to science data processing
[Tidy 05:07:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:07:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:07:43 INFO] resetting WatchDogTimer
[Status 05:07:44 INFO] Starting Set [AERI set: name Y95, 6 scans, 0 angle, D16300 command]
[Ingest 05:07:44 INFO] Sending XML status message
[Status 05:07:44 INFO] Mirror angle: 0
[Mirror 05:07:44 INFO] rotating to position Y
[Status 05:07:44 INFO] .SET file for ACQ96 ready
[Ingest 05:07:44 INFO] Starting acquisition
[Status 05:07:44 INFO] reading housekeeping
[Status 05:08:02 INFO] acquire complete
[Status 05:08:02 INFO] writing housekeeping
[Sequencer 05:08:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:08:02 INFO] incremented Y scene to 95 completed views
[Sequencer 05:08:02 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:08:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:08:02 INFO] incremented to [AERI set: name Z95, 6 scans, 0 angle, D16300 command] set
[sigmove 05:08:02 INFO] Y95.SIG(18)
[sigmove 05:08:02 DEBUG] transformed Y95Ma.SPC -> Y95MA.SPC
[sigmove 05:08:02 DEBUG] transformed Y95Mb.SPC -> Y95MB.SPC
[sigmove 05:08:02 DEBUG] transformed Y95Mc.SPC -> Y95MC.SPC
[sigmove 05:08:02 DEBUG] transformed Y95Md.SPC -> Y95MD.SPC
[sigmove 05:08:02 DEBUG] transformed Y95Me.SPC -> Y95ME.SPC
[sigmove 05:08:02 DEBUG] transformed Y95Mf.SPC -> Y95MF.SPC
[Status 05:08:02 INFO] data for Y95 transferred to science data processing
[Tidy 05:08:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:08:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:08:02 INFO] resetting WatchDogTimer
[Status 05:08:03 INFO] Starting Set [AERI set: name Z95, 6 scans, 0 angle, D16300 command]
[Ingest 05:08:03 INFO] Sending XML status message
[Status 05:08:03 INFO] Mirror angle: 0
[Mirror 05:08:03 INFO] rotating to position Z
[Status 05:08:03 INFO] .SET file for ACQ96 ready
[Ingest 05:08:03 INFO] Starting acquisition
[Status 05:08:03 INFO] reading housekeeping
[Status 05:08:21 INFO] acquire complete
[Status 05:08:22 INFO] writing housekeeping
[Sequencer 05:08:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:08:22 INFO] incremented Z scene to 95 completed views
[Sequencer 05:08:22 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:08:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:08:22 INFO] incremented to [AERI set: name A96, 6 scans, 120 angle, D28300 command] set
[sigmove 05:08:22 INFO] Z95.SIG(18)
[sigmove 05:08:22 DEBUG] transformed Z95Ma.SPC -> Z95MA.SPC
[sigmove 05:08:22 DEBUG] transformed Z95Mb.SPC -> Z95MB.SPC
[sigmove 05:08:22 DEBUG] transformed Z95Mc.SPC -> Z95MC.SPC
[sigmove 05:08:22 DEBUG] transformed Z95Md.SPC -> Z95MD.SPC
[sigmove 05:08:22 DEBUG] transformed Z95Me.SPC -> Z95ME.SPC
[sigmove 05:08:22 DEBUG] transformed Z95Mf.SPC -> Z95MF.SPC
[Status 05:08:22 INFO] data for Z95 transferred to science data processing
[Tidy 05:08:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:08:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:08:22 INFO] resetting WatchDogTimer
[Status 05:08:22 INFO] Starting Set [AERI set: name A96, 6 scans, 120 angle, D28300 command]
[Ingest 05:08:22 INFO] Sending XML status message
[Status 05:08:22 INFO] Mirror angle: 120
[Mirror 05:08:22 INFO] rotating to position A
[Status 05:08:23 INFO] .SET file for ACQ96 ready
[Ingest 05:08:23 INFO] Starting acquisition
[Status 05:08:23 INFO] reading housekeeping
[Status 05:08:41 INFO] acquire complete
[Status 05:08:42 INFO] writing housekeeping
[Sequencer 05:08:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:08:42 INFO] incremented A scene to 96 completed views
[Sequencer 05:08:42 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:08:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:08:42 INFO] incremented to [AERI set: name H96, 6 scans, 60 angle, D22500 command] set
[sigmove 05:08:42 INFO] A96.SIG(18)
[sigmove 05:08:42 DEBUG] transformed A96Ma.SPC -> A96MA.SPC
[sigmove 05:08:42 DEBUG] transformed A96Mb.SPC -> A96MB.SPC
[sigmove 05:08:42 DEBUG] transformed A96Mc.SPC -> A96MC.SPC
[sigmove 05:08:42 DEBUG] transformed A96Md.SPC -> A96MD.SPC
[sigmove 05:08:42 DEBUG] transformed A96Me.SPC -> A96ME.SPC
[sigmove 05:08:42 DEBUG] transformed A96Mf.SPC -> A96MF.SPC
[Status 05:08:42 INFO] data for A96 transferred to science data processing
[Tidy 05:08:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:08:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:08:42 INFO] resetting WatchDogTimer
[Status 05:08:42 INFO] Starting Set [AERI set: name H96, 6 scans, 60 angle, D22500 command]
[Ingest 05:08:42 INFO] Sending XML status message
[Status 05:08:42 INFO] Mirror angle: 60
[Mirror 05:08:42 INFO] rotating to position H
[Status 05:08:43 INFO] .SET file for ACQ96 ready
[Ingest 05:08:43 INFO] Starting acquisition
[Status 05:08:43 INFO] reading housekeeping
[Status 05:09:01 INFO] acquire complete
[Status 05:09:02 INFO] writing housekeeping
[Sequencer 05:09:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:09:02 INFO] incremented H scene to 96 completed views
[Sequencer 05:09:02 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:09:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:09:02 INFO] incremented to [AERI set: name S96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:09:02 INFO] H96.SIG(18)
[sigmove 05:09:02 DEBUG] transformed H96Ma.SPC -> H96MA.SPC
[sigmove 05:09:02 DEBUG] transformed H96Mb.SPC -> H96MB.SPC
[sigmove 05:09:02 DEBUG] transformed H96Mc.SPC -> H96MC.SPC
[sigmove 05:09:02 DEBUG] transformed H96Md.SPC -> H96MD.SPC
[sigmove 05:09:02 DEBUG] transformed H96Me.SPC -> H96ME.SPC
[sigmove 05:09:02 DEBUG] transformed H96Mf.SPC -> H96MF.SPC
[Status 05:09:02 INFO] data for H96 transferred to science data processing
[Tidy 05:09:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:09:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:09:02 INFO] resetting WatchDogTimer
[Status 05:09:02 INFO] Starting Set [AERI set: name S96, 6 scans, 0 angle, D16300 command]
[Ingest 05:09:02 INFO] Sending XML status message
[Status 05:09:02 INFO] Mirror angle: 0
[Mirror 05:09:02 INFO] rotating to position S
[Status 05:09:03 INFO] .SET file for ACQ96 ready
[Ingest 05:09:03 INFO] Starting acquisition
[Status 05:09:03 INFO] reading housekeeping
[Status 05:09:22 INFO] acquire complete
[Status 05:09:22 INFO] writing housekeeping
[Sequencer 05:09:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:09:22 INFO] incremented S scene to 96 completed views
[Sequencer 05:09:22 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:09:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:09:22 INFO] incremented to [AERI set: name T96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:09:22 INFO] S96.SIG(18)
[sigmove 05:09:22 DEBUG] transformed S96Ma.SPC -> S96MA.SPC
[sigmove 05:09:22 DEBUG] transformed S96Mb.SPC -> S96MB.SPC
[sigmove 05:09:22 DEBUG] transformed S96Mc.SPC -> S96MC.SPC
[sigmove 05:09:22 DEBUG] transformed S96Md.SPC -> S96MD.SPC
[sigmove 05:09:22 DEBUG] transformed S96Me.SPC -> S96ME.SPC
[sigmove 05:09:22 DEBUG] transformed S96Mf.SPC -> S96MF.SPC
[Status 05:09:22 INFO] data for S96 transferred to science data processing
[Tidy 05:09:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:09:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:09:22 INFO] resetting WatchDogTimer
[Status 05:09:22 INFO] Starting Set [AERI set: name T96, 6 scans, 0 angle, D16300 command]
[Ingest 05:09:22 INFO] Sending XML status message
[Status 05:09:22 INFO] Mirror angle: 0
[Mirror 05:09:22 INFO] rotating to position T
[Status 05:09:23 INFO] .SET file for ACQ96 ready
[Ingest 05:09:23 INFO] Starting acquisition
[Status 05:09:23 INFO] reading housekeeping
[Status 05:09:41 INFO] acquire complete
[Status 05:09:41 INFO] writing housekeeping
[Sequencer 05:09:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:09:41 INFO] incremented T scene to 96 completed views
[Sequencer 05:09:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:09:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:09:41 INFO] incremented to [AERI set: name U96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:09:41 INFO] T96.SIG(18)
[sigmove 05:09:41 DEBUG] transformed T96Ma.SPC -> T96MA.SPC
[sigmove 05:09:41 DEBUG] transformed T96Mb.SPC -> T96MB.SPC
[sigmove 05:09:41 DEBUG] transformed T96Mc.SPC -> T96MC.SPC
[sigmove 05:09:41 DEBUG] transformed T96Md.SPC -> T96MD.SPC
[sigmove 05:09:41 DEBUG] transformed T96Me.SPC -> T96ME.SPC
[sigmove 05:09:41 DEBUG] transformed T96Mf.SPC -> T96MF.SPC
[Status 05:09:41 INFO] data for T96 transferred to science data processing
[Tidy 05:09:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:09:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:09:41 INFO] resetting WatchDogTimer
[Status 05:09:41 INFO] Starting Set [AERI set: name U96, 6 scans, 0 angle, D16300 command]
[Ingest 05:09:41 INFO] Sending XML status message
[Status 05:09:41 INFO] Mirror angle: 0
[Mirror 05:09:42 INFO] rotating to position U
[Status 05:09:42 INFO] .SET file for ACQ96 ready
[Ingest 05:09:42 INFO] Starting acquisition
[Status 05:09:42 INFO] reading housekeeping
[Status 05:10:00 INFO] acquire complete
[Status 05:10:01 INFO] writing housekeeping
[Sequencer 05:10:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:10:01 INFO] incremented U scene to 96 completed views
[Sequencer 05:10:01 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:10:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:10:01 INFO] incremented to [AERI set: name V96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:10:01 INFO] U96.SIG(18)
[sigmove 05:10:01 DEBUG] transformed U96Ma.SPC -> U96MA.SPC
[sigmove 05:10:01 DEBUG] transformed U96Mb.SPC -> U96MB.SPC
[sigmove 05:10:01 DEBUG] transformed U96Mc.SPC -> U96MC.SPC
[sigmove 05:10:01 DEBUG] transformed U96Md.SPC -> U96MD.SPC
[sigmove 05:10:01 DEBUG] transformed U96Me.SPC -> U96ME.SPC
[sigmove 05:10:01 DEBUG] transformed U96Mf.SPC -> U96MF.SPC
[Status 05:10:01 INFO] data for U96 transferred to science data processing
[Tidy 05:10:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:10:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:10:01 INFO] resetting WatchDogTimer
[Status 05:10:01 INFO] Starting Set [AERI set: name V96, 6 scans, 0 angle, D16300 command]
[Ingest 05:10:01 INFO] Sending XML status message
[Status 05:10:01 INFO] Mirror angle: 0
[Mirror 05:10:01 INFO] rotating to position V
[Status 05:10:01 INFO] .SET file for ACQ96 ready
[Ingest 05:10:02 INFO] Starting acquisition
[Status 05:10:02 INFO] reading housekeeping
[Status 05:10:20 INFO] acquire complete
[Status 05:10:21 INFO] writing housekeeping
[Sequencer 05:10:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:10:21 INFO] incremented V scene to 96 completed views
[Sequencer 05:10:21 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:10:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:10:21 INFO] incremented to [AERI set: name W96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:10:21 INFO] V96.SIG(18)
[sigmove 05:10:21 DEBUG] transformed V96Ma.SPC -> V96MA.SPC
[sigmove 05:10:21 DEBUG] transformed V96Mb.SPC -> V96MB.SPC
[sigmove 05:10:21 DEBUG] transformed V96Mc.SPC -> V96MC.SPC
[sigmove 05:10:21 DEBUG] transformed V96Md.SPC -> V96MD.SPC
[sigmove 05:10:21 DEBUG] transformed V96Me.SPC -> V96ME.SPC
[sigmove 05:10:21 DEBUG] transformed V96Mf.SPC -> V96MF.SPC
[Status 05:10:21 INFO] data for V96 transferred to science data processing
[Tidy 05:10:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:10:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:10:21 INFO] resetting WatchDogTimer
[Status 05:10:21 INFO] Starting Set [AERI set: name W96, 6 scans, 0 angle, D16300 command]
[Ingest 05:10:21 INFO] Sending XML status message
[Status 05:10:21 INFO] Mirror angle: 0
[Mirror 05:10:21 INFO] rotating to position W
[Status 05:10:21 INFO] .SET file for ACQ96 ready
[Ingest 05:10:21 INFO] Starting acquisition
[Status 05:10:21 INFO] reading housekeeping
[Status 05:10:39 INFO] acquire complete
[Status 05:10:40 INFO] writing housekeeping
[Sequencer 05:10:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:10:40 INFO] incremented W scene to 96 completed views
[Sequencer 05:10:40 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:10:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:10:40 INFO] incremented to [AERI set: name X96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:10:40 INFO] W96.SIG(18)
[sigmove 05:10:40 DEBUG] transformed W96Ma.SPC -> W96MA.SPC
[sigmove 05:10:40 DEBUG] transformed W96Mb.SPC -> W96MB.SPC
[sigmove 05:10:40 DEBUG] transformed W96Mc.SPC -> W96MC.SPC
[sigmove 05:10:40 DEBUG] transformed W96Md.SPC -> W96MD.SPC
[sigmove 05:10:40 DEBUG] transformed W96Me.SPC -> W96ME.SPC
[sigmove 05:10:40 DEBUG] transformed W96Mf.SPC -> W96MF.SPC
[Status 05:10:40 INFO] data for W96 transferred to science data processing
[Tidy 05:10:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:10:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:10:40 INFO] resetting WatchDogTimer
[Status 05:10:40 INFO] Starting Set [AERI set: name X96, 6 scans, 0 angle, D16300 command]
[Ingest 05:10:40 INFO] Sending XML status message
[Status 05:10:40 INFO] Mirror angle: 0
[Mirror 05:10:40 INFO] rotating to position X
[Status 05:10:40 INFO] .SET file for ACQ96 ready
[Ingest 05:10:40 INFO] Starting acquisition
[Status 05:10:40 INFO] reading housekeeping
[Status 05:10:58 INFO] acquire complete
[Status 05:10:59 INFO] writing housekeeping
[Sequencer 05:10:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:10:59 INFO] incremented X scene to 96 completed views
[Sequencer 05:10:59 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:10:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:10:59 INFO] incremented to [AERI set: name Y96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:10:59 INFO] X96.SIG(18)
[sigmove 05:10:59 DEBUG] transformed X96Ma.SPC -> X96MA.SPC
[sigmove 05:10:59 DEBUG] transformed X96Mb.SPC -> X96MB.SPC
[sigmove 05:10:59 DEBUG] transformed X96Mc.SPC -> X96MC.SPC
[sigmove 05:10:59 DEBUG] transformed X96Md.SPC -> X96MD.SPC
[sigmove 05:10:59 DEBUG] transformed X96Me.SPC -> X96ME.SPC
[sigmove 05:10:59 DEBUG] transformed X96Mf.SPC -> X96MF.SPC
[Status 05:10:59 INFO] data for X96 transferred to science data processing
[Tidy 05:10:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:10:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:10:59 INFO] resetting WatchDogTimer
[Status 05:10:59 INFO] Starting Set [AERI set: name Y96, 6 scans, 0 angle, D16300 command]
[Ingest 05:10:59 INFO] Sending XML status message
[Status 05:10:59 INFO] Mirror angle: 0
[Mirror 05:10:59 INFO] rotating to position Y
[Status 05:10:59 INFO] .SET file for ACQ96 ready
[Ingest 05:10:59 INFO] Starting acquisition
[Status 05:11:00 INFO] reading housekeeping
[Status 05:11:17 INFO] acquire complete
[Status 05:11:18 INFO] writing housekeeping
[Sequencer 05:11:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:11:18 INFO] incremented Y scene to 96 completed views
[Sequencer 05:11:18 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:11:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:11:18 INFO] incremented to [AERI set: name Z96, 6 scans, 0 angle, D16300 command] set
[sigmove 05:11:18 INFO] Y96.SIG(18)
[sigmove 05:11:18 DEBUG] transformed Y96Ma.SPC -> Y96MA.SPC
[sigmove 05:11:18 DEBUG] transformed Y96Mb.SPC -> Y96MB.SPC
[sigmove 05:11:18 DEBUG] transformed Y96Mc.SPC -> Y96MC.SPC
[sigmove 05:11:18 DEBUG] transformed Y96Md.SPC -> Y96MD.SPC
[sigmove 05:11:18 DEBUG] transformed Y96Me.SPC -> Y96ME.SPC
[sigmove 05:11:18 DEBUG] transformed Y96Mf.SPC -> Y96MF.SPC
[Status 05:11:18 INFO] data for Y96 transferred to science data processing
[Tidy 05:11:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:11:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:11:18 INFO] resetting WatchDogTimer
[Status 05:11:18 INFO] Starting Set [AERI set: name Z96, 6 scans, 0 angle, D16300 command]
[Ingest 05:11:18 INFO] Sending XML status message
[Status 05:11:18 INFO] Mirror angle: 0
[Mirror 05:11:18 INFO] rotating to position Z
[Status 05:11:18 INFO] .SET file for ACQ96 ready
[Ingest 05:11:19 INFO] Starting acquisition
[Status 05:11:19 INFO] reading housekeeping
[Status 05:11:36 INFO] acquire complete
[Status 05:11:37 INFO] writing housekeeping
[Sequencer 05:11:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:11:37 INFO] incremented Z scene to 96 completed views
[Sequencer 05:11:37 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:11:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:11:37 INFO] incremented to [AERI set: name H97, 6 scans, 60 angle, D22500 command] set
[sigmove 05:11:37 INFO] Z96.SIG(18)
[sigmove 05:11:37 DEBUG] transformed Z96Ma.SPC -> Z96MA.SPC
[sigmove 05:11:37 DEBUG] transformed Z96Mb.SPC -> Z96MB.SPC
[sigmove 05:11:37 DEBUG] transformed Z96Mc.SPC -> Z96MC.SPC
[sigmove 05:11:37 DEBUG] transformed Z96Md.SPC -> Z96MD.SPC
[sigmove 05:11:37 DEBUG] transformed Z96Me.SPC -> Z96ME.SPC
[sigmove 05:11:37 DEBUG] transformed Z96Mf.SPC -> Z96MF.SPC
[Status 05:11:37 INFO] data for Z96 transferred to science data processing
[Tidy 05:11:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:11:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:11:37 INFO] resetting WatchDogTimer
[Status 05:11:37 INFO] Starting Set [AERI set: name H97, 6 scans, 60 angle, D22500 command]
[Ingest 05:11:37 INFO] Sending XML status message
[Status 05:11:37 INFO] Mirror angle: 60
[Mirror 05:11:37 INFO] rotating to position H
[Status 05:11:38 INFO] .SET file for ACQ96 ready
[Ingest 05:11:38 INFO] Starting acquisition
[Status 05:11:38 INFO] reading housekeeping
[Status 05:11:57 INFO] acquire complete
[Status 05:11:57 INFO] writing housekeeping
[Sequencer 05:11:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:11:57 INFO] incremented H scene to 97 completed views
[Sequencer 05:11:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:11:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:11:57 INFO] incremented to [AERI set: name A97, 6 scans, 120 angle, D28300 command] set
[sigmove 05:11:57 INFO] H97.SIG(18)
[sigmove 05:11:57 DEBUG] transformed H97Ma.SPC -> H97MA.SPC
[sigmove 05:11:57 DEBUG] transformed H97Mb.SPC -> H97MB.SPC
[sigmove 05:11:57 DEBUG] transformed H97Mc.SPC -> H97MC.SPC
[sigmove 05:11:57 DEBUG] transformed H97Md.SPC -> H97MD.SPC
[sigmove 05:11:57 DEBUG] transformed H97Me.SPC -> H97ME.SPC
[sigmove 05:11:57 DEBUG] transformed H97Mf.SPC -> H97MF.SPC
[Status 05:11:57 INFO] data for H97 transferred to science data processing
[Tidy 05:11:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:11:57 INFO] A95.FIN(19),H95.FIN(19),S95.FIN(19),T95.FIN(19),U95.FIN(19),V95.FIN(19),W95.FIN(19),X95.FIN(19),Y95.FIN(19),Z95.FIN(19),A96.FIN(19),H96.FIN(19),S96.FIN(19),T96.FIN(19),U96.FIN(19),V96.FIN(19),W96.FIN(19),X96.FIN(19),Y96.FIN(19),Z96.FIN(19)
[sigmove 05:11:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:11:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:11:59 DEBUG] done zipping
[WatchDog 05:11:59 INFO] resetting WatchDogTimer
[Status 05:11:59 INFO] Starting Set [AERI set: name A97, 6 scans, 120 angle, D28300 command]
[Ingest 05:11:59 INFO] Sending XML status message
[Status 05:11:59 INFO] Mirror angle: 120
[Mirror 05:11:59 INFO] rotating to position A
[Status 05:12:00 INFO] .SET file for ACQ96 ready
[Ingest 05:12:00 INFO] Starting acquisition
[Status 05:12:01 INFO] reading housekeeping
[Status 05:12:18 INFO] acquire complete
[Status 05:12:18 INFO] writing housekeeping
[Sequencer 05:12:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:12:18 INFO] incremented A scene to 97 completed views
[Sequencer 05:12:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:12:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:12:18 INFO] incremented to [AERI set: name S97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:12:18 INFO] A97.SIG(18)
[sigmove 05:12:18 DEBUG] transformed A97Ma.SPC -> A97MA.SPC
[sigmove 05:12:18 DEBUG] transformed A97Mb.SPC -> A97MB.SPC
[sigmove 05:12:18 DEBUG] transformed A97Mc.SPC -> A97MC.SPC
[sigmove 05:12:18 DEBUG] transformed A97Md.SPC -> A97MD.SPC
[sigmove 05:12:18 DEBUG] transformed A97Me.SPC -> A97ME.SPC
[sigmove 05:12:18 DEBUG] transformed A97Mf.SPC -> A97MF.SPC
[Status 05:12:18 INFO] data for A97 transferred to science data processing
[Tidy 05:12:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:12:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:12:18 INFO] resetting WatchDogTimer
[Status 05:12:19 INFO] Starting Set [AERI set: name S97, 6 scans, 0 angle, D16300 command]
[Ingest 05:12:19 INFO] Sending XML status message
[Status 05:12:19 INFO] Mirror angle: 0
[Mirror 05:12:19 INFO] rotating to position S
[Status 05:12:20 INFO] .SET file for ACQ96 ready
[Ingest 05:12:20 INFO] Starting acquisition
[Status 05:12:20 INFO] reading housekeeping
[Status 05:12:38 INFO] acquire complete
[Status 05:12:39 INFO] writing housekeeping
[Sequencer 05:12:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:12:39 INFO] incremented S scene to 97 completed views
[Sequencer 05:12:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:12:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:12:39 INFO] incremented to [AERI set: name T97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:12:39 INFO] S97.SIG(18)
[sigmove 05:12:39 DEBUG] transformed S97Ma.SPC -> S97MA.SPC
[sigmove 05:12:39 DEBUG] transformed S97Mb.SPC -> S97MB.SPC
[sigmove 05:12:39 DEBUG] transformed S97Mc.SPC -> S97MC.SPC
[sigmove 05:12:39 DEBUG] transformed S97Md.SPC -> S97MD.SPC
[sigmove 05:12:39 DEBUG] transformed S97Me.SPC -> S97ME.SPC
[sigmove 05:12:39 DEBUG] transformed S97Mf.SPC -> S97MF.SPC
[Status 05:12:39 INFO] data for S97 transferred to science data processing
[Tidy 05:12:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:12:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:12:39 INFO] resetting WatchDogTimer
[Status 05:12:39 INFO] Starting Set [AERI set: name T97, 6 scans, 0 angle, D16300 command]
[Ingest 05:12:39 INFO] Sending XML status message
[Status 05:12:39 INFO] Mirror angle: 0
[Mirror 05:12:39 INFO] rotating to position T
[Status 05:12:39 INFO] .SET file for ACQ96 ready
[Ingest 05:12:39 INFO] Starting acquisition
[Status 05:12:39 INFO] reading housekeeping
[Status 05:12:57 INFO] acquire complete
[Status 05:12:58 INFO] writing housekeeping
[Sequencer 05:12:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:12:58 INFO] incremented T scene to 97 completed views
[Sequencer 05:12:58 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:12:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:12:58 INFO] incremented to [AERI set: name U97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:12:58 INFO] T97.SIG(18)
[sigmove 05:12:58 DEBUG] transformed T97Ma.SPC -> T97MA.SPC
[sigmove 05:12:58 DEBUG] transformed T97Mb.SPC -> T97MB.SPC
[sigmove 05:12:58 DEBUG] transformed T97Mc.SPC -> T97MC.SPC
[sigmove 05:12:58 DEBUG] transformed T97Md.SPC -> T97MD.SPC
[sigmove 05:12:58 DEBUG] transformed T97Me.SPC -> T97ME.SPC
[sigmove 05:12:58 DEBUG] transformed T97Mf.SPC -> T97MF.SPC
[Status 05:12:58 INFO] data for T97 transferred to science data processing
[Tidy 05:12:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:12:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:12:58 INFO] resetting WatchDogTimer
[Status 05:12:58 INFO] Starting Set [AERI set: name U97, 6 scans, 0 angle, D16300 command]
[Ingest 05:12:58 INFO] Sending XML status message
[Status 05:12:58 INFO] Mirror angle: 0
[Mirror 05:12:58 INFO] rotating to position U
[Status 05:12:58 INFO] .SET file for ACQ96 ready
[Ingest 05:12:58 INFO] Starting acquisition
[Status 05:12:59 INFO] reading housekeeping
[Status 05:13:16 INFO] acquire complete
[Status 05:13:17 INFO] writing housekeeping
[Sequencer 05:13:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:13:17 INFO] incremented U scene to 97 completed views
[Sequencer 05:13:17 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:13:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:13:17 INFO] incremented to [AERI set: name V97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:13:17 INFO] U97.SIG(18)
[sigmove 05:13:17 DEBUG] transformed U97Ma.SPC -> U97MA.SPC
[sigmove 05:13:17 DEBUG] transformed U97Mb.SPC -> U97MB.SPC
[sigmove 05:13:17 DEBUG] transformed U97Mc.SPC -> U97MC.SPC
[sigmove 05:13:17 DEBUG] transformed U97Md.SPC -> U97MD.SPC
[sigmove 05:13:17 DEBUG] transformed U97Me.SPC -> U97ME.SPC
[sigmove 05:13:17 DEBUG] transformed U97Mf.SPC -> U97MF.SPC
[Status 05:13:17 INFO] data for U97 transferred to science data processing
[Tidy 05:13:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:13:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:13:17 INFO] resetting WatchDogTimer
[Status 05:13:17 INFO] Starting Set [AERI set: name V97, 6 scans, 0 angle, D16300 command]
[Ingest 05:13:17 INFO] Sending XML status message
[Status 05:13:17 INFO] Mirror angle: 0
[Mirror 05:13:17 INFO] rotating to position V
[Status 05:13:17 INFO] .SET file for ACQ96 ready
[Ingest 05:13:17 INFO] Starting acquisition
[Status 05:13:18 INFO] reading housekeeping
[Status 05:13:35 INFO] acquire complete
[Status 05:13:36 INFO] writing housekeeping
[Sequencer 05:13:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:13:36 INFO] incremented V scene to 97 completed views
[Sequencer 05:13:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:13:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:13:36 INFO] incremented to [AERI set: name W97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:13:36 INFO] V97.SIG(18)
[sigmove 05:13:36 DEBUG] transformed V97Ma.SPC -> V97MA.SPC
[sigmove 05:13:36 DEBUG] transformed V97Mb.SPC -> V97MB.SPC
[sigmove 05:13:36 DEBUG] transformed V97Mc.SPC -> V97MC.SPC
[sigmove 05:13:36 DEBUG] transformed V97Md.SPC -> V97MD.SPC
[sigmove 05:13:36 DEBUG] transformed V97Me.SPC -> V97ME.SPC
[sigmove 05:13:36 DEBUG] transformed V97Mf.SPC -> V97MF.SPC
[Status 05:13:36 INFO] data for V97 transferred to science data processing
[Tidy 05:13:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:13:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:13:36 INFO] resetting WatchDogTimer
[Status 05:13:36 INFO] Starting Set [AERI set: name W97, 6 scans, 0 angle, D16300 command]
[Ingest 05:13:36 INFO] Sending XML status message
[Status 05:13:36 INFO] Mirror angle: 0
[Mirror 05:13:36 INFO] rotating to position W
[Status 05:13:36 INFO] .SET file for ACQ96 ready
[Ingest 05:13:37 INFO] Starting acquisition
[Status 05:13:37 INFO] reading housekeeping
[Status 05:13:54 INFO] acquire complete
[Status 05:13:55 INFO] writing housekeeping
[Sequencer 05:13:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:13:55 INFO] incremented W scene to 97 completed views
[Sequencer 05:13:55 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:13:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:13:55 INFO] incremented to [AERI set: name X97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:13:55 INFO] W97.SIG(18)
[sigmove 05:13:55 DEBUG] transformed W97Ma.SPC -> W97MA.SPC
[sigmove 05:13:55 DEBUG] transformed W97Mb.SPC -> W97MB.SPC
[sigmove 05:13:55 DEBUG] transformed W97Mc.SPC -> W97MC.SPC
[sigmove 05:13:55 DEBUG] transformed W97Md.SPC -> W97MD.SPC
[sigmove 05:13:55 DEBUG] transformed W97Me.SPC -> W97ME.SPC
[sigmove 05:13:55 DEBUG] transformed W97Mf.SPC -> W97MF.SPC
[Status 05:13:55 INFO] data for W97 transferred to science data processing
[Tidy 05:13:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:13:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:13:55 INFO] resetting WatchDogTimer
[Status 05:13:55 INFO] Starting Set [AERI set: name X97, 6 scans, 0 angle, D16300 command]
[Ingest 05:13:55 INFO] Sending XML status message
[Status 05:13:55 INFO] Mirror angle: 0
[Mirror 05:13:55 INFO] rotating to position X
[Status 05:13:56 INFO] .SET file for ACQ96 ready
[Ingest 05:13:56 INFO] Starting acquisition
[Status 05:13:56 INFO] reading housekeeping
[Status 05:14:14 INFO] acquire complete
[Status 05:14:14 INFO] writing housekeeping
[Sequencer 05:14:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:14:14 INFO] incremented X scene to 97 completed views
[Sequencer 05:14:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:14:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:14:14 INFO] incremented to [AERI set: name Y97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:14:14 INFO] X97.SIG(18)
[sigmove 05:14:14 DEBUG] transformed X97Ma.SPC -> X97MA.SPC
[sigmove 05:14:14 DEBUG] transformed X97Mb.SPC -> X97MB.SPC
[sigmove 05:14:14 DEBUG] transformed X97Mc.SPC -> X97MC.SPC
[sigmove 05:14:14 DEBUG] transformed X97Md.SPC -> X97MD.SPC
[sigmove 05:14:14 DEBUG] transformed X97Me.SPC -> X97ME.SPC
[sigmove 05:14:14 DEBUG] transformed X97Mf.SPC -> X97MF.SPC
[Status 05:14:14 INFO] data for X97 transferred to science data processing
[Tidy 05:14:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:14:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:14:14 INFO] resetting WatchDogTimer
[Status 05:14:14 INFO] Starting Set [AERI set: name Y97, 6 scans, 0 angle, D16300 command]
[Ingest 05:14:14 INFO] Sending XML status message
[Status 05:14:14 INFO] Mirror angle: 0
[Mirror 05:14:14 INFO] rotating to position Y
[Status 05:14:15 INFO] .SET file for ACQ96 ready
[Ingest 05:14:15 INFO] Starting acquisition
[Status 05:14:15 INFO] reading housekeeping
[Status 05:14:33 INFO] acquire complete
[Status 05:14:33 INFO] writing housekeeping
[Sequencer 05:14:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:14:33 INFO] incremented Y scene to 97 completed views
[Sequencer 05:14:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:14:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:14:33 INFO] incremented to [AERI set: name Z97, 6 scans, 0 angle, D16300 command] set
[sigmove 05:14:33 INFO] Y97.SIG(18)
[sigmove 05:14:33 DEBUG] transformed Y97Ma.SPC -> Y97MA.SPC
[sigmove 05:14:33 DEBUG] transformed Y97Mb.SPC -> Y97MB.SPC
[sigmove 05:14:33 DEBUG] transformed Y97Mc.SPC -> Y97MC.SPC
[sigmove 05:14:33 DEBUG] transformed Y97Md.SPC -> Y97MD.SPC
[sigmove 05:14:33 DEBUG] transformed Y97Me.SPC -> Y97ME.SPC
[sigmove 05:14:33 DEBUG] transformed Y97Mf.SPC -> Y97MF.SPC
[Status 05:14:33 INFO] data for Y97 transferred to science data processing
[Tidy 05:14:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:14:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:14:33 INFO] resetting WatchDogTimer
[Status 05:14:33 INFO] Starting Set [AERI set: name Z97, 6 scans, 0 angle, D16300 command]
[Ingest 05:14:33 INFO] Sending XML status message
[Status 05:14:33 INFO] Mirror angle: 0
[Mirror 05:14:33 INFO] rotating to position Z
[Status 05:14:34 INFO] .SET file for ACQ96 ready
[Ingest 05:14:34 INFO] Starting acquisition
[Status 05:14:34 INFO] reading housekeeping
[Status 05:14:52 INFO] acquire complete
[Status 05:14:52 INFO] writing housekeeping
[Sequencer 05:14:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:14:52 INFO] incremented Z scene to 97 completed views
[Sequencer 05:14:52 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:14:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:14:52 INFO] incremented to [AERI set: name A98, 6 scans, 120 angle, D28300 command] set
[sigmove 05:14:52 INFO] Z97.SIG(18)
[sigmove 05:14:52 DEBUG] transformed Z97Ma.SPC -> Z97MA.SPC
[sigmove 05:14:52 DEBUG] transformed Z97Mb.SPC -> Z97MB.SPC
[sigmove 05:14:52 DEBUG] transformed Z97Mc.SPC -> Z97MC.SPC
[sigmove 05:14:52 DEBUG] transformed Z97Md.SPC -> Z97MD.SPC
[sigmove 05:14:52 DEBUG] transformed Z97Me.SPC -> Z97ME.SPC
[sigmove 05:14:52 DEBUG] transformed Z97Mf.SPC -> Z97MF.SPC
[Status 05:14:52 INFO] data for Z97 transferred to science data processing
[Tidy 05:14:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:14:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:14:52 INFO] resetting WatchDogTimer
[Status 05:14:52 INFO] Starting Set [AERI set: name A98, 6 scans, 120 angle, D28300 command]
[Ingest 05:14:52 INFO] Sending XML status message
[Status 05:14:52 INFO] Mirror angle: 120
[Mirror 05:14:53 INFO] rotating to position A
[Status 05:14:54 INFO] .SET file for ACQ96 ready
[Ingest 05:14:54 INFO] Starting acquisition
[Status 05:14:54 INFO] reading housekeeping
[Status 05:15:12 INFO] acquire complete
[Status 05:15:12 INFO] writing housekeeping
[Sequencer 05:15:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:15:12 INFO] incremented A scene to 98 completed views
[Sequencer 05:15:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:15:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:15:12 INFO] incremented to [AERI set: name H98, 6 scans, 60 angle, D22500 command] set
[sigmove 05:15:12 INFO] A98.SIG(18)
[sigmove 05:15:12 DEBUG] transformed A98Ma.SPC -> A98MA.SPC
[sigmove 05:15:12 DEBUG] transformed A98Mb.SPC -> A98MB.SPC
[sigmove 05:15:12 DEBUG] transformed A98Mc.SPC -> A98MC.SPC
[sigmove 05:15:12 DEBUG] transformed A98Md.SPC -> A98MD.SPC
[sigmove 05:15:12 DEBUG] transformed A98Me.SPC -> A98ME.SPC
[sigmove 05:15:12 DEBUG] transformed A98Mf.SPC -> A98MF.SPC
[Status 05:15:12 INFO] data for A98 transferred to science data processing
[Tidy 05:15:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:15:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:15:12 INFO] resetting WatchDogTimer
[Status 05:15:13 INFO] Starting Set [AERI set: name H98, 6 scans, 60 angle, D22500 command]
[Ingest 05:15:13 INFO] Sending XML status message
[Status 05:15:13 INFO] Mirror angle: 60
[Mirror 05:15:13 INFO] rotating to position H
[Status 05:15:13 INFO] .SET file for ACQ96 ready
[Ingest 05:15:14 INFO] Starting acquisition
[Status 05:15:14 INFO] reading housekeeping
[Status 05:15:32 INFO] acquire complete
[Status 05:15:33 INFO] writing housekeeping
[Sequencer 05:15:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:15:33 INFO] incremented H scene to 98 completed views
[Sequencer 05:15:33 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:15:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:15:33 INFO] incremented to [AERI set: name S98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:15:33 INFO] H98.SIG(18)
[sigmove 05:15:33 DEBUG] transformed H98Ma.SPC -> H98MA.SPC
[sigmove 05:15:33 DEBUG] transformed H98Mb.SPC -> H98MB.SPC
[sigmove 05:15:33 DEBUG] transformed H98Mc.SPC -> H98MC.SPC
[sigmove 05:15:33 DEBUG] transformed H98Md.SPC -> H98MD.SPC
[sigmove 05:15:33 DEBUG] transformed H98Me.SPC -> H98ME.SPC
[sigmove 05:15:33 DEBUG] transformed H98Mf.SPC -> H98MF.SPC
[Status 05:15:33 INFO] data for H98 transferred to science data processing
[Tidy 05:15:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:15:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:15:33 INFO] resetting WatchDogTimer
[Status 05:15:33 INFO] Starting Set [AERI set: name S98, 6 scans, 0 angle, D16300 command]
[Ingest 05:15:33 INFO] Sending XML status message
[Status 05:15:33 INFO] Mirror angle: 0
[Mirror 05:15:33 INFO] rotating to position S
[Status 05:15:34 INFO] .SET file for ACQ96 ready
[Ingest 05:15:34 INFO] Starting acquisition
[Status 05:15:34 INFO] reading housekeeping
[Status 05:15:52 INFO] acquire complete
[Status 05:15:53 INFO] writing housekeeping
[Sequencer 05:15:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:15:53 INFO] incremented S scene to 98 completed views
[Sequencer 05:15:53 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:15:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:15:53 INFO] incremented to [AERI set: name T98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:15:53 INFO] S98.SIG(18)
[sigmove 05:15:53 DEBUG] transformed S98Ma.SPC -> S98MA.SPC
[sigmove 05:15:53 DEBUG] transformed S98Mb.SPC -> S98MB.SPC
[sigmove 05:15:53 DEBUG] transformed S98Mc.SPC -> S98MC.SPC
[sigmove 05:15:53 DEBUG] transformed S98Md.SPC -> S98MD.SPC
[sigmove 05:15:53 DEBUG] transformed S98Me.SPC -> S98ME.SPC
[sigmove 05:15:53 DEBUG] transformed S98Mf.SPC -> S98MF.SPC
[Status 05:15:53 INFO] data for S98 transferred to science data processing
[Tidy 05:15:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:15:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:15:53 INFO] resetting WatchDogTimer
[Status 05:15:53 INFO] Starting Set [AERI set: name T98, 6 scans, 0 angle, D16300 command]
[Ingest 05:15:53 INFO] Sending XML status message
[Status 05:15:53 INFO] Mirror angle: 0
[Mirror 05:15:53 INFO] rotating to position T
[Status 05:15:53 INFO] .SET file for ACQ96 ready
[Ingest 05:15:54 INFO] Starting acquisition
[Status 05:15:54 INFO] reading housekeeping
[Status 05:16:11 INFO] acquire complete
[Status 05:16:12 INFO] writing housekeeping
[Sequencer 05:16:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:16:12 INFO] incremented T scene to 98 completed views
[Sequencer 05:16:12 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:16:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:16:12 INFO] incremented to [AERI set: name U98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:16:12 INFO] T98.SIG(18)
[sigmove 05:16:12 DEBUG] transformed T98Ma.SPC -> T98MA.SPC
[sigmove 05:16:12 DEBUG] transformed T98Mb.SPC -> T98MB.SPC
[sigmove 05:16:12 DEBUG] transformed T98Mc.SPC -> T98MC.SPC
[sigmove 05:16:12 DEBUG] transformed T98Md.SPC -> T98MD.SPC
[sigmove 05:16:12 DEBUG] transformed T98Me.SPC -> T98ME.SPC
[sigmove 05:16:12 DEBUG] transformed T98Mf.SPC -> T98MF.SPC
[Status 05:16:12 INFO] data for T98 transferred to science data processing
[Tidy 05:16:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:16:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:16:12 INFO] resetting WatchDogTimer
[Status 05:16:12 INFO] Starting Set [AERI set: name U98, 6 scans, 0 angle, D16300 command]
[Ingest 05:16:12 INFO] Sending XML status message
[Status 05:16:12 INFO] Mirror angle: 0
[Mirror 05:16:12 INFO] rotating to position U
[Status 05:16:12 INFO] .SET file for ACQ96 ready
[Ingest 05:16:13 INFO] Starting acquisition
[Status 05:16:13 INFO] reading housekeeping
[Status 05:16:31 INFO] acquire complete
[Status 05:16:31 INFO] writing housekeeping
[Sequencer 05:16:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:16:31 INFO] incremented U scene to 98 completed views
[Sequencer 05:16:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:16:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:16:31 INFO] incremented to [AERI set: name V98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:16:31 INFO] U98.SIG(18)
[sigmove 05:16:31 DEBUG] transformed U98Ma.SPC -> U98MA.SPC
[sigmove 05:16:31 DEBUG] transformed U98Mb.SPC -> U98MB.SPC
[sigmove 05:16:31 DEBUG] transformed U98Mc.SPC -> U98MC.SPC
[sigmove 05:16:31 DEBUG] transformed U98Md.SPC -> U98MD.SPC
[sigmove 05:16:31 DEBUG] transformed U98Me.SPC -> U98ME.SPC
[sigmove 05:16:31 DEBUG] transformed U98Mf.SPC -> U98MF.SPC
[Status 05:16:31 INFO] data for U98 transferred to science data processing
[Tidy 05:16:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:16:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:16:31 INFO] resetting WatchDogTimer
[Status 05:16:31 INFO] Starting Set [AERI set: name V98, 6 scans, 0 angle, D16300 command]
[Ingest 05:16:31 INFO] Sending XML status message
[Status 05:16:31 INFO] Mirror angle: 0
[Mirror 05:16:31 INFO] rotating to position V
[Status 05:16:32 INFO] .SET file for ACQ96 ready
[Ingest 05:16:32 INFO] Starting acquisition
[Status 05:16:32 INFO] reading housekeeping
[Status 05:16:50 INFO] acquire complete
[Status 05:16:50 INFO] writing housekeeping
[Sequencer 05:16:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:16:50 INFO] incremented V scene to 98 completed views
[Sequencer 05:16:50 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:16:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:16:50 INFO] incremented to [AERI set: name W98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:16:50 INFO] V98.SIG(18)
[sigmove 05:16:50 DEBUG] transformed V98Ma.SPC -> V98MA.SPC
[sigmove 05:16:50 DEBUG] transformed V98Mb.SPC -> V98MB.SPC
[sigmove 05:16:50 DEBUG] transformed V98Mc.SPC -> V98MC.SPC
[sigmove 05:16:50 DEBUG] transformed V98Md.SPC -> V98MD.SPC
[sigmove 05:16:50 DEBUG] transformed V98Me.SPC -> V98ME.SPC
[sigmove 05:16:50 DEBUG] transformed V98Mf.SPC -> V98MF.SPC
[Status 05:16:50 INFO] data for V98 transferred to science data processing
[Tidy 05:16:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:16:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:16:50 INFO] resetting WatchDogTimer
[Status 05:16:50 INFO] Starting Set [AERI set: name W98, 6 scans, 0 angle, D16300 command]
[Ingest 05:16:50 INFO] Sending XML status message
[Status 05:16:50 INFO] Mirror angle: 0
[Mirror 05:16:50 INFO] rotating to position W
[Status 05:16:51 INFO] .SET file for ACQ96 ready
[Ingest 05:16:51 INFO] Starting acquisition
[Status 05:16:51 INFO] reading housekeeping
[Status 05:17:09 INFO] acquire complete
[Status 05:17:09 INFO] writing housekeeping
[Sequencer 05:17:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:17:09 INFO] incremented W scene to 98 completed views
[Sequencer 05:17:09 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:17:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:17:09 INFO] incremented to [AERI set: name X98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:17:09 INFO] W98.SIG(18)
[sigmove 05:17:09 DEBUG] transformed W98Ma.SPC -> W98MA.SPC
[sigmove 05:17:09 DEBUG] transformed W98Mb.SPC -> W98MB.SPC
[sigmove 05:17:09 DEBUG] transformed W98Mc.SPC -> W98MC.SPC
[sigmove 05:17:09 DEBUG] transformed W98Md.SPC -> W98MD.SPC
[sigmove 05:17:09 DEBUG] transformed W98Me.SPC -> W98ME.SPC
[sigmove 05:17:09 DEBUG] transformed W98Mf.SPC -> W98MF.SPC
[Status 05:17:09 INFO] data for W98 transferred to science data processing
[Tidy 05:17:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:17:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:17:09 INFO] resetting WatchDogTimer
[Status 05:17:09 INFO] Starting Set [AERI set: name X98, 6 scans, 0 angle, D16300 command]
[Ingest 05:17:09 INFO] Sending XML status message
[Status 05:17:09 INFO] Mirror angle: 0
[Mirror 05:17:09 INFO] rotating to position X
[Status 05:17:10 INFO] .SET file for ACQ96 ready
[Ingest 05:17:10 INFO] Starting acquisition
[Status 05:17:10 INFO] reading housekeeping
[Status 05:17:28 INFO] acquire complete
[Status 05:17:28 INFO] writing housekeeping
[Sequencer 05:17:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:17:28 INFO] incremented X scene to 98 completed views
[Sequencer 05:17:28 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:17:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:17:28 INFO] incremented to [AERI set: name Y98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:17:28 INFO] X98.SIG(18)
[sigmove 05:17:28 DEBUG] transformed X98Ma.SPC -> X98MA.SPC
[sigmove 05:17:28 DEBUG] transformed X98Mb.SPC -> X98MB.SPC
[sigmove 05:17:28 DEBUG] transformed X98Mc.SPC -> X98MC.SPC
[sigmove 05:17:28 DEBUG] transformed X98Md.SPC -> X98MD.SPC
[sigmove 05:17:28 DEBUG] transformed X98Me.SPC -> X98ME.SPC
[sigmove 05:17:28 DEBUG] transformed X98Mf.SPC -> X98MF.SPC
[Status 05:17:28 INFO] data for X98 transferred to science data processing
[Tidy 05:17:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:17:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:17:28 INFO] resetting WatchDogTimer
[Status 05:17:28 INFO] Starting Set [AERI set: name Y98, 6 scans, 0 angle, D16300 command]
[Ingest 05:17:28 INFO] Sending XML status message
[Status 05:17:28 INFO] Mirror angle: 0
[Mirror 05:17:29 INFO] rotating to position Y
[Status 05:17:29 INFO] .SET file for ACQ96 ready
[Ingest 05:17:29 INFO] Starting acquisition
[Status 05:17:29 INFO] reading housekeeping
[Status 05:17:47 INFO] acquire complete
[Status 05:17:47 INFO] writing housekeeping
[Sequencer 05:17:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:17:47 INFO] incremented Y scene to 98 completed views
[Sequencer 05:17:47 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:17:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:17:47 INFO] incremented to [AERI set: name Z98, 6 scans, 0 angle, D16300 command] set
[sigmove 05:17:47 INFO] Y98.SIG(18)
[sigmove 05:17:47 DEBUG] transformed Y98Ma.SPC -> Y98MA.SPC
[sigmove 05:17:47 DEBUG] transformed Y98Mb.SPC -> Y98MB.SPC
[sigmove 05:17:47 DEBUG] transformed Y98Mc.SPC -> Y98MC.SPC
[sigmove 05:17:47 DEBUG] transformed Y98Md.SPC -> Y98MD.SPC
[sigmove 05:17:47 DEBUG] transformed Y98Me.SPC -> Y98ME.SPC
[sigmove 05:17:47 DEBUG] transformed Y98Mf.SPC -> Y98MF.SPC
[Status 05:17:47 INFO] data for Y98 transferred to science data processing
[Tidy 05:17:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:17:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:17:47 INFO] resetting WatchDogTimer
[Status 05:17:48 INFO] Starting Set [AERI set: name Z98, 6 scans, 0 angle, D16300 command]
[Ingest 05:17:48 INFO] Sending XML status message
[Status 05:17:48 INFO] Mirror angle: 0
[Mirror 05:17:48 INFO] rotating to position Z
[Status 05:17:48 INFO] .SET file for ACQ96 ready
[Ingest 05:17:48 INFO] Starting acquisition
[Status 05:17:48 INFO] reading housekeeping
[Status 05:18:10 INFO] acquire complete
[Status 05:18:11 INFO] writing housekeeping
[Sequencer 05:18:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:18:11 INFO] incremented Z scene to 98 completed views
[Sequencer 05:18:11 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:18:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:18:11 INFO] incremented to [AERI set: name H99, 6 scans, 60 angle, D22500 command] set
[sigmove 05:18:11 INFO] Z98.SIG(18)
[sigmove 05:18:11 DEBUG] transformed Z98Ma.SPC -> Z98MA.SPC
[sigmove 05:18:11 DEBUG] transformed Z98Mb.SPC -> Z98MB.SPC
[sigmove 05:18:11 DEBUG] transformed Z98Mc.SPC -> Z98MC.SPC
[sigmove 05:18:11 DEBUG] transformed Z98Md.SPC -> Z98MD.SPC
[sigmove 05:18:11 DEBUG] transformed Z98Me.SPC -> Z98ME.SPC
[sigmove 05:18:11 DEBUG] transformed Z98Mf.SPC -> Z98MF.SPC
[Status 05:18:11 INFO] data for Z98 transferred to science data processing
[Tidy 05:18:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:18:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:18:11 INFO] resetting WatchDogTimer
[Status 05:18:11 INFO] Starting Set [AERI set: name H99, 6 scans, 60 angle, D22500 command]
[Ingest 05:18:11 INFO] Sending XML status message
[Status 05:18:11 INFO] Mirror angle: 60
[Mirror 05:18:11 INFO] rotating to position H
[Status 05:18:12 INFO] .SET file for ACQ96 ready
[Ingest 05:18:12 INFO] Starting acquisition
[Status 05:18:12 INFO] reading housekeeping
[Status 05:18:31 INFO] acquire complete
[Status 05:18:31 INFO] writing housekeeping
[Sequencer 05:18:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:18:31 INFO] incremented H scene to 99 completed views
[Sequencer 05:18:31 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:18:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:18:31 INFO] incremented to [AERI set: name A99, 6 scans, 120 angle, D28300 command] set
[sigmove 05:18:31 INFO] H99.SIG(18)
[sigmove 05:18:31 DEBUG] transformed H99Ma.SPC -> H99MA.SPC
[sigmove 05:18:31 DEBUG] transformed H99Mb.SPC -> H99MB.SPC
[sigmove 05:18:31 DEBUG] transformed H99Mc.SPC -> H99MC.SPC
[sigmove 05:18:31 DEBUG] transformed H99Md.SPC -> H99MD.SPC
[sigmove 05:18:31 DEBUG] transformed H99Me.SPC -> H99ME.SPC
[sigmove 05:18:31 DEBUG] transformed H99Mf.SPC -> H99MF.SPC
[Status 05:18:31 INFO] data for H99 transferred to science data processing
[Tidy 05:18:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:18:31 INFO] A97.FIN(19),H97.FIN(19),S97.FIN(19),T97.FIN(19),U97.FIN(19),V97.FIN(19),W97.FIN(19),X97.FIN(19),Y97.FIN(19),Z97.FIN(19),A98.FIN(19),H98.FIN(19),S98.FIN(19),T98.FIN(19),U98.FIN(19),V98.FIN(19),W98.FIN(19),X98.FIN(19),Y98.FIN(19),Z98.FIN(19)
[sigmove 05:18:31 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:18:31 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:18:33 DEBUG] done zipping
[WatchDog 05:18:33 INFO] resetting WatchDogTimer
[Status 05:18:33 INFO] Starting Set [AERI set: name A99, 6 scans, 120 angle, D28300 command]
[Ingest 05:18:33 INFO] Sending XML status message
[Status 05:18:33 INFO] Mirror angle: 120
[Mirror 05:18:33 INFO] rotating to position A
[Status 05:18:34 INFO] .SET file for ACQ96 ready
[Ingest 05:18:34 INFO] Starting acquisition
[Status 05:18:35 INFO] reading housekeeping
[Status 05:18:52 INFO] acquire complete
[Status 05:18:52 INFO] writing housekeeping
[Sequencer 05:18:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:18:52 INFO] incremented A scene to 99 completed views
[Sequencer 05:18:52 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:18:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:18:52 INFO] incremented to [AERI set: name S99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:18:52 INFO] A99.SIG(18)
[sigmove 05:18:52 DEBUG] transformed A99Ma.SPC -> A99MA.SPC
[sigmove 05:18:52 DEBUG] transformed A99Mb.SPC -> A99MB.SPC
[sigmove 05:18:52 DEBUG] transformed A99Mc.SPC -> A99MC.SPC
[sigmove 05:18:52 DEBUG] transformed A99Md.SPC -> A99MD.SPC
[sigmove 05:18:52 DEBUG] transformed A99Me.SPC -> A99ME.SPC
[sigmove 05:18:52 DEBUG] transformed A99Mf.SPC -> A99MF.SPC
[Status 05:18:52 INFO] data for A99 transferred to science data processing
[Tidy 05:18:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:18:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:18:52 INFO] resetting WatchDogTimer
[Status 05:18:53 INFO] Starting Set [AERI set: name S99, 6 scans, 0 angle, D16300 command]
[Ingest 05:18:53 INFO] Sending XML status message
[Status 05:18:53 INFO] Mirror angle: 0
[Mirror 05:18:53 INFO] rotating to position S
[Status 05:18:54 INFO] .SET file for ACQ96 ready
[Ingest 05:18:54 INFO] Starting acquisition
[Status 05:18:54 INFO] reading housekeeping
[Status 05:19:12 INFO] acquire complete
[Status 05:19:13 INFO] writing housekeeping
[Sequencer 05:19:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:19:13 INFO] incremented S scene to 99 completed views
[Sequencer 05:19:13 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:19:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:19:13 INFO] incremented to [AERI set: name T99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:19:13 INFO] S99.SIG(18)
[sigmove 05:19:13 DEBUG] transformed S99Ma.SPC -> S99MA.SPC
[sigmove 05:19:13 DEBUG] transformed S99Mb.SPC -> S99MB.SPC
[sigmove 05:19:13 DEBUG] transformed S99Mc.SPC -> S99MC.SPC
[sigmove 05:19:13 DEBUG] transformed S99Md.SPC -> S99MD.SPC
[sigmove 05:19:13 DEBUG] transformed S99Me.SPC -> S99ME.SPC
[sigmove 05:19:13 DEBUG] transformed S99Mf.SPC -> S99MF.SPC
[Status 05:19:13 INFO] data for S99 transferred to science data processing
[Tidy 05:19:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:19:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:19:13 INFO] resetting WatchDogTimer
[Status 05:19:13 INFO] Starting Set [AERI set: name T99, 6 scans, 0 angle, D16300 command]
[Ingest 05:19:13 INFO] Sending XML status message
[Status 05:19:13 INFO] Mirror angle: 0
[Mirror 05:19:13 INFO] rotating to position T
[Status 05:19:13 INFO] .SET file for ACQ96 ready
[Ingest 05:19:13 INFO] Starting acquisition
[Status 05:19:14 INFO] reading housekeeping
[Status 05:19:31 INFO] acquire complete
[Status 05:19:32 INFO] writing housekeeping
[Sequencer 05:19:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:19:32 INFO] incremented T scene to 99 completed views
[Sequencer 05:19:32 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:19:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:19:32 INFO] incremented to [AERI set: name U99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:19:32 INFO] T99.SIG(18)
[sigmove 05:19:32 DEBUG] transformed T99Ma.SPC -> T99MA.SPC
[sigmove 05:19:32 DEBUG] transformed T99Mb.SPC -> T99MB.SPC
[sigmove 05:19:32 DEBUG] transformed T99Mc.SPC -> T99MC.SPC
[sigmove 05:19:32 DEBUG] transformed T99Md.SPC -> T99MD.SPC
[sigmove 05:19:32 DEBUG] transformed T99Me.SPC -> T99ME.SPC
[sigmove 05:19:32 DEBUG] transformed T99Mf.SPC -> T99MF.SPC
[Status 05:19:32 INFO] data for T99 transferred to science data processing
[Tidy 05:19:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:19:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:19:32 INFO] resetting WatchDogTimer
[Status 05:19:32 INFO] Starting Set [AERI set: name U99, 6 scans, 0 angle, D16300 command]
[Ingest 05:19:32 INFO] Sending XML status message
[Status 05:19:32 INFO] Mirror angle: 0
[Mirror 05:19:32 INFO] rotating to position U
[Status 05:19:32 INFO] .SET file for ACQ96 ready
[Ingest 05:19:32 INFO] Starting acquisition
[Status 05:19:33 INFO] reading housekeeping
[Status 05:19:50 INFO] acquire complete
[Status 05:19:51 INFO] writing housekeeping
[Sequencer 05:19:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:19:51 INFO] incremented U scene to 99 completed views
[Sequencer 05:19:51 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:19:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:19:51 INFO] incremented to [AERI set: name V99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:19:51 INFO] U99.SIG(18)
[sigmove 05:19:51 DEBUG] transformed U99Ma.SPC -> U99MA.SPC
[sigmove 05:19:51 DEBUG] transformed U99Mb.SPC -> U99MB.SPC
[sigmove 05:19:51 DEBUG] transformed U99Mc.SPC -> U99MC.SPC
[sigmove 05:19:51 DEBUG] transformed U99Md.SPC -> U99MD.SPC
[sigmove 05:19:51 DEBUG] transformed U99Me.SPC -> U99ME.SPC
[sigmove 05:19:51 DEBUG] transformed U99Mf.SPC -> U99MF.SPC
[Status 05:19:51 INFO] data for U99 transferred to science data processing
[Tidy 05:19:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:19:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:19:51 INFO] resetting WatchDogTimer
[Status 05:19:51 INFO] Starting Set [AERI set: name V99, 6 scans, 0 angle, D16300 command]
[Ingest 05:19:51 INFO] Sending XML status message
[Status 05:19:51 INFO] Mirror angle: 0
[Mirror 05:19:51 INFO] rotating to position V
[Status 05:19:51 INFO] .SET file for ACQ96 ready
[Ingest 05:19:52 INFO] Starting acquisition
[Status 05:19:52 INFO] reading housekeeping
[Status 05:20:09 INFO] acquire complete
[Status 05:20:10 INFO] writing housekeeping
[Sequencer 05:20:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:20:10 INFO] incremented V scene to 99 completed views
[Sequencer 05:20:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:20:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:20:10 INFO] incremented to [AERI set: name W99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:20:10 INFO] V99.SIG(18)
[sigmove 05:20:10 DEBUG] transformed V99Ma.SPC -> V99MA.SPC
[sigmove 05:20:10 DEBUG] transformed V99Mb.SPC -> V99MB.SPC
[sigmove 05:20:10 DEBUG] transformed V99Mc.SPC -> V99MC.SPC
[sigmove 05:20:10 DEBUG] transformed V99Md.SPC -> V99MD.SPC
[sigmove 05:20:10 DEBUG] transformed V99Me.SPC -> V99ME.SPC
[sigmove 05:20:10 DEBUG] transformed V99Mf.SPC -> V99MF.SPC
[Status 05:20:10 INFO] data for V99 transferred to science data processing
[Tidy 05:20:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:20:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:20:10 INFO] resetting WatchDogTimer
[Status 05:20:10 INFO] Starting Set [AERI set: name W99, 6 scans, 0 angle, D16300 command]
[Ingest 05:20:10 INFO] Sending XML status message
[Status 05:20:10 INFO] Mirror angle: 0
[Mirror 05:20:10 INFO] rotating to position W
[Status 05:20:10 INFO] .SET file for ACQ96 ready
[Ingest 05:20:11 INFO] Starting acquisition
[Status 05:20:11 INFO] reading housekeeping
[Status 05:20:28 INFO] acquire complete
[Status 05:20:29 INFO] writing housekeeping
[Sequencer 05:20:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:20:29 INFO] incremented W scene to 99 completed views
[Sequencer 05:20:29 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:20:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:20:29 INFO] incremented to [AERI set: name X99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:20:29 INFO] W99.SIG(18)
[sigmove 05:20:29 DEBUG] transformed W99Ma.SPC -> W99MA.SPC
[sigmove 05:20:29 DEBUG] transformed W99Mb.SPC -> W99MB.SPC
[sigmove 05:20:29 DEBUG] transformed W99Mc.SPC -> W99MC.SPC
[sigmove 05:20:29 DEBUG] transformed W99Md.SPC -> W99MD.SPC
[sigmove 05:20:29 DEBUG] transformed W99Me.SPC -> W99ME.SPC
[sigmove 05:20:29 DEBUG] transformed W99Mf.SPC -> W99MF.SPC
[Status 05:20:29 INFO] data for W99 transferred to science data processing
[Tidy 05:20:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:20:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:20:29 INFO] resetting WatchDogTimer
[Status 05:20:29 INFO] Starting Set [AERI set: name X99, 6 scans, 0 angle, D16300 command]
[Ingest 05:20:29 INFO] Sending XML status message
[Status 05:20:29 INFO] Mirror angle: 0
[Mirror 05:20:29 INFO] rotating to position X
[Status 05:20:30 INFO] .SET file for ACQ96 ready
[Ingest 05:20:30 INFO] Starting acquisition
[Status 05:20:30 INFO] reading housekeeping
[Status 05:20:48 INFO] acquire complete
[Status 05:20:48 INFO] writing housekeeping
[Sequencer 05:20:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:20:48 INFO] incremented X scene to 99 completed views
[Sequencer 05:20:48 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:20:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:20:48 INFO] incremented to [AERI set: name Y99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:20:48 INFO] X99.SIG(18)
[sigmove 05:20:48 DEBUG] transformed X99Ma.SPC -> X99MA.SPC
[sigmove 05:20:48 DEBUG] transformed X99Mb.SPC -> X99MB.SPC
[sigmove 05:20:48 DEBUG] transformed X99Mc.SPC -> X99MC.SPC
[sigmove 05:20:48 DEBUG] transformed X99Md.SPC -> X99MD.SPC
[sigmove 05:20:48 DEBUG] transformed X99Me.SPC -> X99ME.SPC
[sigmove 05:20:48 DEBUG] transformed X99Mf.SPC -> X99MF.SPC
[Status 05:20:48 INFO] data for X99 transferred to science data processing
[Tidy 05:20:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:20:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:20:48 INFO] resetting WatchDogTimer
[Status 05:20:48 INFO] Starting Set [AERI set: name Y99, 6 scans, 0 angle, D16300 command]
[Ingest 05:20:48 INFO] Sending XML status message
[Status 05:20:48 INFO] Mirror angle: 0
[Mirror 05:20:48 INFO] rotating to position Y
[Status 05:20:49 INFO] .SET file for ACQ96 ready
[Ingest 05:20:49 INFO] Starting acquisition
[Status 05:20:49 INFO] reading housekeeping
[Status 05:21:07 INFO] acquire complete
[Status 05:21:07 INFO] writing housekeeping
[Sequencer 05:21:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:21:07 INFO] incremented Y scene to 99 completed views
[Sequencer 05:21:07 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:21:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:21:07 INFO] incremented to [AERI set: name Z99, 6 scans, 0 angle, D16300 command] set
[sigmove 05:21:07 INFO] Y99.SIG(18)
[sigmove 05:21:07 DEBUG] transformed Y99Ma.SPC -> Y99MA.SPC
[sigmove 05:21:07 DEBUG] transformed Y99Mb.SPC -> Y99MB.SPC
[sigmove 05:21:07 DEBUG] transformed Y99Mc.SPC -> Y99MC.SPC
[sigmove 05:21:07 DEBUG] transformed Y99Md.SPC -> Y99MD.SPC
[sigmove 05:21:07 DEBUG] transformed Y99Me.SPC -> Y99ME.SPC
[sigmove 05:21:07 DEBUG] transformed Y99Mf.SPC -> Y99MF.SPC
[Status 05:21:07 INFO] data for Y99 transferred to science data processing
[Tidy 05:21:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:21:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:21:07 INFO] resetting WatchDogTimer
[Status 05:21:07 INFO] Starting Set [AERI set: name Z99, 6 scans, 0 angle, D16300 command]
[Ingest 05:21:07 INFO] Sending XML status message
[Status 05:21:07 INFO] Mirror angle: 0
[Mirror 05:21:07 INFO] rotating to position Z
[Status 05:21:08 INFO] .SET file for ACQ96 ready
[Ingest 05:21:08 INFO] Starting acquisition
[Status 05:21:08 INFO] reading housekeeping
[Status 05:21:26 INFO] acquire complete
[Status 05:21:26 INFO] writing housekeeping
[Sequencer 05:21:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:21:26 INFO] incremented Z scene to 99 completed views
[Sequencer 05:21:26 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:21:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:21:26 INFO] incremented to [AERI set: name A100, 6 scans, 120 angle, D28300 command] set
[sigmove 05:21:26 INFO] Z99.SIG(18)
[sigmove 05:21:26 DEBUG] transformed Z99Ma.SPC -> Z99MA.SPC
[sigmove 05:21:26 DEBUG] transformed Z99Mb.SPC -> Z99MB.SPC
[sigmove 05:21:26 DEBUG] transformed Z99Mc.SPC -> Z99MC.SPC
[sigmove 05:21:26 DEBUG] transformed Z99Md.SPC -> Z99MD.SPC
[sigmove 05:21:26 DEBUG] transformed Z99Me.SPC -> Z99ME.SPC
[sigmove 05:21:26 DEBUG] transformed Z99Mf.SPC -> Z99MF.SPC
[Status 05:21:26 INFO] data for Z99 transferred to science data processing
[Tidy 05:21:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:21:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:21:26 INFO] resetting WatchDogTimer
[Status 05:21:26 INFO] Starting Set [AERI set: name A100, 6 scans, 120 angle, D28300 command]
[Ingest 05:21:26 INFO] Sending XML status message
[Status 05:21:26 INFO] Mirror angle: 120
[Mirror 05:21:27 INFO] rotating to position A
[Status 05:21:28 INFO] .SET file for ACQ96 ready
[Ingest 05:21:28 INFO] Starting acquisition
[Status 05:21:28 INFO] reading housekeeping
[Status 05:21:46 INFO] acquire complete
[Status 05:21:46 INFO] writing housekeeping
[Sequencer 05:21:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:21:46 INFO] incremented A scene to 100 completed views
[Sequencer 05:21:46 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:21:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:21:46 INFO] incremented to [AERI set: name H100, 6 scans, 60 angle, D22500 command] set
[sigmove 05:21:46 INFO] A100.SIG(18)
[sigmove 05:21:46 DEBUG] transformed A100Ma.SPC -> A100MA.SPC
[sigmove 05:21:46 DEBUG] transformed A100Mb.SPC -> A100MB.SPC
[sigmove 05:21:46 DEBUG] transformed A100Mc.SPC -> A100MC.SPC
[sigmove 05:21:46 DEBUG] transformed A100Md.SPC -> A100MD.SPC
[sigmove 05:21:46 DEBUG] transformed A100Me.SPC -> A100ME.SPC
[sigmove 05:21:46 DEBUG] transformed A100Mf.SPC -> A100MF.SPC
[Status 05:21:46 INFO] data for A100 transferred to science data processing
[Tidy 05:21:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:21:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:21:46 INFO] resetting WatchDogTimer
[Status 05:21:47 INFO] Starting Set [AERI set: name H100, 6 scans, 60 angle, D22500 command]
[Ingest 05:21:47 INFO] Sending XML status message
[Status 05:21:47 INFO] Mirror angle: 60
[Mirror 05:21:47 INFO] rotating to position H
[Status 05:21:48 INFO] .SET file for ACQ96 ready
[Ingest 05:21:48 INFO] Starting acquisition
[Status 05:21:48 INFO] reading housekeeping
[Status 05:22:06 INFO] acquire complete
[Status 05:22:07 INFO] writing housekeeping
[Sequencer 05:22:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:22:07 INFO] incremented H scene to 100 completed views
[Sequencer 05:22:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:22:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:22:07 INFO] incremented to [AERI set: name S100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:22:07 INFO] H100.SIG(18)
[sigmove 05:22:07 DEBUG] transformed H100Ma.SPC -> H100MA.SPC
[sigmove 05:22:07 DEBUG] transformed H100Mb.SPC -> H100MB.SPC
[sigmove 05:22:07 DEBUG] transformed H100Mc.SPC -> H100MC.SPC
[sigmove 05:22:07 DEBUG] transformed H100Md.SPC -> H100MD.SPC
[sigmove 05:22:07 DEBUG] transformed H100Me.SPC -> H100ME.SPC
[sigmove 05:22:07 DEBUG] transformed H100Mf.SPC -> H100MF.SPC
[Status 05:22:07 INFO] data for H100 transferred to science data processing
[Tidy 05:22:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:22:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:22:07 INFO] resetting WatchDogTimer
[Status 05:22:07 INFO] Starting Set [AERI set: name S100, 6 scans, 0 angle, D16300 command]
[Ingest 05:22:07 INFO] Sending XML status message
[Status 05:22:07 INFO] Mirror angle: 0
[Mirror 05:22:07 INFO] rotating to position S
[Status 05:22:08 INFO] .SET file for ACQ96 ready
[Ingest 05:22:08 INFO] Starting acquisition
[Status 05:22:08 INFO] reading housekeeping
[Status 05:22:26 INFO] acquire complete
[Status 05:22:27 INFO] writing housekeeping
[Sequencer 05:22:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:22:27 INFO] incremented S scene to 100 completed views
[Sequencer 05:22:27 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:22:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:22:27 INFO] incremented to [AERI set: name T100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:22:27 INFO] S100.SIG(18)
[sigmove 05:22:27 DEBUG] transformed S100Ma.SPC -> S100MA.SPC
[sigmove 05:22:27 DEBUG] transformed S100Mb.SPC -> S100MB.SPC
[sigmove 05:22:27 DEBUG] transformed S100Mc.SPC -> S100MC.SPC
[sigmove 05:22:27 DEBUG] transformed S100Md.SPC -> S100MD.SPC
[sigmove 05:22:27 DEBUG] transformed S100Me.SPC -> S100ME.SPC
[sigmove 05:22:27 DEBUG] transformed S100Mf.SPC -> S100MF.SPC
[Status 05:22:27 INFO] data for S100 transferred to science data processing
[Tidy 05:22:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:22:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:22:27 INFO] resetting WatchDogTimer
[Status 05:22:27 INFO] Starting Set [AERI set: name T100, 6 scans, 0 angle, D16300 command]
[Ingest 05:22:27 INFO] Sending XML status message
[Status 05:22:27 INFO] Mirror angle: 0
[Mirror 05:22:27 INFO] rotating to position T
[Status 05:22:27 INFO] .SET file for ACQ96 ready
[Ingest 05:22:28 INFO] Starting acquisition
[Status 05:22:28 INFO] reading housekeeping
[Status 05:22:46 INFO] acquire complete
[Status 05:22:46 INFO] writing housekeeping
[Sequencer 05:22:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:22:46 INFO] incremented T scene to 100 completed views
[Sequencer 05:22:46 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:22:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:22:46 INFO] incremented to [AERI set: name U100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:22:46 INFO] T100.SIG(18)
[sigmove 05:22:46 DEBUG] transformed T100Ma.SPC -> T100MA.SPC
[sigmove 05:22:46 DEBUG] transformed T100Mb.SPC -> T100MB.SPC
[sigmove 05:22:46 DEBUG] transformed T100Mc.SPC -> T100MC.SPC
[sigmove 05:22:46 DEBUG] transformed T100Md.SPC -> T100MD.SPC
[sigmove 05:22:46 DEBUG] transformed T100Me.SPC -> T100ME.SPC
[sigmove 05:22:46 DEBUG] transformed T100Mf.SPC -> T100MF.SPC
[Status 05:22:46 INFO] data for T100 transferred to science data processing
[Tidy 05:22:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:22:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:22:46 INFO] resetting WatchDogTimer
[Status 05:22:46 INFO] Starting Set [AERI set: name U100, 6 scans, 0 angle, D16300 command]
[Ingest 05:22:46 INFO] Sending XML status message
[Status 05:22:46 INFO] Mirror angle: 0
[Mirror 05:22:46 INFO] rotating to position U
[Status 05:22:47 INFO] .SET file for ACQ96 ready
[Ingest 05:22:47 INFO] Starting acquisition
[Status 05:22:47 INFO] reading housekeeping
[Status 05:23:05 INFO] acquire complete
[Status 05:23:05 INFO] writing housekeeping
[Sequencer 05:23:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:23:05 INFO] incremented U scene to 100 completed views
[Sequencer 05:23:05 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:23:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:23:05 INFO] incremented to [AERI set: name V100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:23:05 INFO] U100.SIG(18)
[sigmove 05:23:05 DEBUG] transformed U100Ma.SPC -> U100MA.SPC
[sigmove 05:23:05 DEBUG] transformed U100Mb.SPC -> U100MB.SPC
[sigmove 05:23:05 DEBUG] transformed U100Mc.SPC -> U100MC.SPC
[sigmove 05:23:05 DEBUG] transformed U100Md.SPC -> U100MD.SPC
[sigmove 05:23:05 DEBUG] transformed U100Me.SPC -> U100ME.SPC
[sigmove 05:23:05 DEBUG] transformed U100Mf.SPC -> U100MF.SPC
[Status 05:23:05 INFO] data for U100 transferred to science data processing
[Tidy 05:23:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:23:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:23:05 INFO] resetting WatchDogTimer
[Status 05:23:05 INFO] Starting Set [AERI set: name V100, 6 scans, 0 angle, D16300 command]
[Ingest 05:23:05 INFO] Sending XML status message
[Status 05:23:05 INFO] Mirror angle: 0
[Mirror 05:23:05 INFO] rotating to position V
[Status 05:23:06 INFO] .SET file for ACQ96 ready
[Ingest 05:23:06 INFO] Starting acquisition
[Status 05:23:06 INFO] reading housekeeping
[Status 05:23:24 INFO] acquire complete
[Status 05:23:24 INFO] writing housekeeping
[Sequencer 05:23:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:23:24 INFO] incremented V scene to 100 completed views
[Sequencer 05:23:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:23:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:23:24 INFO] incremented to [AERI set: name W100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:23:24 INFO] V100.SIG(18)
[sigmove 05:23:24 DEBUG] transformed V100Ma.SPC -> V100MA.SPC
[sigmove 05:23:24 DEBUG] transformed V100Mb.SPC -> V100MB.SPC
[sigmove 05:23:24 DEBUG] transformed V100Mc.SPC -> V100MC.SPC
[sigmove 05:23:24 DEBUG] transformed V100Md.SPC -> V100MD.SPC
[sigmove 05:23:24 DEBUG] transformed V100Me.SPC -> V100ME.SPC
[sigmove 05:23:24 DEBUG] transformed V100Mf.SPC -> V100MF.SPC
[Status 05:23:24 INFO] data for V100 transferred to science data processing
[Tidy 05:23:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:23:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:23:24 INFO] resetting WatchDogTimer
[Status 05:23:24 INFO] Starting Set [AERI set: name W100, 6 scans, 0 angle, D16300 command]
[Ingest 05:23:24 INFO] Sending XML status message
[Status 05:23:24 INFO] Mirror angle: 0
[Mirror 05:23:24 INFO] rotating to position W
[Status 05:23:25 INFO] .SET file for ACQ96 ready
[Ingest 05:23:25 INFO] Starting acquisition
[Status 05:23:25 INFO] reading housekeeping
[Status 05:23:43 INFO] acquire complete
[Status 05:23:43 INFO] writing housekeeping
[Sequencer 05:23:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:23:43 INFO] incremented W scene to 100 completed views
[Sequencer 05:23:43 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:23:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:23:43 INFO] incremented to [AERI set: name X100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:23:43 INFO] W100.SIG(18)
[sigmove 05:23:43 DEBUG] transformed W100Ma.SPC -> W100MA.SPC
[sigmove 05:23:43 DEBUG] transformed W100Mb.SPC -> W100MB.SPC
[sigmove 05:23:43 DEBUG] transformed W100Mc.SPC -> W100MC.SPC
[sigmove 05:23:43 DEBUG] transformed W100Md.SPC -> W100MD.SPC
[sigmove 05:23:43 DEBUG] transformed W100Me.SPC -> W100ME.SPC
[sigmove 05:23:43 DEBUG] transformed W100Mf.SPC -> W100MF.SPC
[Status 05:23:43 INFO] data for W100 transferred to science data processing
[Tidy 05:23:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:23:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:23:43 INFO] resetting WatchDogTimer
[Status 05:23:43 INFO] Starting Set [AERI set: name X100, 6 scans, 0 angle, D16300 command]
[Ingest 05:23:43 INFO] Sending XML status message
[Status 05:23:43 INFO] Mirror angle: 0
[Mirror 05:23:44 INFO] rotating to position X
[Status 05:23:44 INFO] .SET file for ACQ96 ready
[Ingest 05:23:44 INFO] Starting acquisition
[Status 05:23:44 INFO] reading housekeeping
[Status 05:24:02 INFO] acquire complete
[Status 05:24:02 INFO] writing housekeeping
[Sequencer 05:24:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:24:02 INFO] incremented X scene to 100 completed views
[Sequencer 05:24:02 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:24:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:24:02 INFO] incremented to [AERI set: name Y100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:24:02 INFO] X100.SIG(18)
[sigmove 05:24:02 DEBUG] transformed X100Ma.SPC -> X100MA.SPC
[sigmove 05:24:02 DEBUG] transformed X100Mb.SPC -> X100MB.SPC
[sigmove 05:24:02 DEBUG] transformed X100Mc.SPC -> X100MC.SPC
[sigmove 05:24:02 DEBUG] transformed X100Md.SPC -> X100MD.SPC
[sigmove 05:24:02 DEBUG] transformed X100Me.SPC -> X100ME.SPC
[sigmove 05:24:02 DEBUG] transformed X100Mf.SPC -> X100MF.SPC
[Status 05:24:02 INFO] data for X100 transferred to science data processing
[Tidy 05:24:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:24:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:24:02 INFO] resetting WatchDogTimer
[Status 05:24:02 INFO] Starting Set [AERI set: name Y100, 6 scans, 0 angle, D16300 command]
[Ingest 05:24:02 INFO] Sending XML status message
[Status 05:24:02 INFO] Mirror angle: 0
[Mirror 05:24:03 INFO] rotating to position Y
[Status 05:24:03 INFO] .SET file for ACQ96 ready
[Ingest 05:24:03 INFO] Starting acquisition
[Status 05:24:03 INFO] reading housekeeping
[Status 05:24:21 INFO] acquire complete
[Status 05:24:21 INFO] writing housekeeping
[Sequencer 05:24:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:24:21 INFO] incremented Y scene to 100 completed views
[Sequencer 05:24:21 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:24:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:24:21 INFO] incremented to [AERI set: name Z100, 6 scans, 0 angle, D16300 command] set
[sigmove 05:24:21 INFO] Y100.SIG(18)
[sigmove 05:24:21 DEBUG] transformed Y100Ma.SPC -> Y100MA.SPC
[sigmove 05:24:21 DEBUG] transformed Y100Mb.SPC -> Y100MB.SPC
[sigmove 05:24:21 DEBUG] transformed Y100Mc.SPC -> Y100MC.SPC
[sigmove 05:24:21 DEBUG] transformed Y100Md.SPC -> Y100MD.SPC
[sigmove 05:24:21 DEBUG] transformed Y100Me.SPC -> Y100ME.SPC
[sigmove 05:24:21 DEBUG] transformed Y100Mf.SPC -> Y100MF.SPC
[Status 05:24:21 INFO] data for Y100 transferred to science data processing
[Tidy 05:24:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:24:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:24:21 INFO] resetting WatchDogTimer
[Status 05:24:22 INFO] Starting Set [AERI set: name Z100, 6 scans, 0 angle, D16300 command]
[Ingest 05:24:22 INFO] Sending XML status message
[Status 05:24:22 INFO] Mirror angle: 0
[Mirror 05:24:22 INFO] rotating to position Z
[Status 05:24:22 INFO] .SET file for ACQ96 ready
[Ingest 05:24:22 INFO] Starting acquisition
[Status 05:24:22 INFO] reading housekeeping
[Status 05:24:40 INFO] acquire complete
[Status 05:24:40 INFO] writing housekeeping
[Sequencer 05:24:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:24:40 INFO] incremented Z scene to 100 completed views
[Sequencer 05:24:40 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:24:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:24:40 INFO] incremented to [AERI set: name H101, 6 scans, 60 angle, D22500 command] set
[sigmove 05:24:40 INFO] Z100.SIG(18)
[sigmove 05:24:40 DEBUG] transformed Z100Ma.SPC -> Z100MA.SPC
[sigmove 05:24:40 DEBUG] transformed Z100Mb.SPC -> Z100MB.SPC
[sigmove 05:24:40 DEBUG] transformed Z100Mc.SPC -> Z100MC.SPC
[sigmove 05:24:40 DEBUG] transformed Z100Md.SPC -> Z100MD.SPC
[sigmove 05:24:40 DEBUG] transformed Z100Me.SPC -> Z100ME.SPC
[sigmove 05:24:40 DEBUG] transformed Z100Mf.SPC -> Z100MF.SPC
[Status 05:24:40 INFO] data for Z100 transferred to science data processing
[Tidy 05:24:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:24:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:24:40 INFO] resetting WatchDogTimer
[Status 05:24:41 INFO] Starting Set [AERI set: name H101, 6 scans, 60 angle, D22500 command]
[Ingest 05:24:41 INFO] Sending XML status message
[Status 05:24:41 INFO] Mirror angle: 60
[Mirror 05:24:41 INFO] rotating to position H
[Status 05:24:42 INFO] .SET file for ACQ96 ready
[Ingest 05:24:42 INFO] Starting acquisition
[Status 05:24:42 INFO] reading housekeeping
[Status 05:25:00 INFO] acquire complete
[Status 05:25:01 INFO] writing housekeeping
[Sequencer 05:25:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:25:01 INFO] incremented H scene to 101 completed views
[Sequencer 05:25:01 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:25:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:25:01 INFO] incremented to [AERI set: name A101, 6 scans, 120 angle, D28300 command] set
[sigmove 05:25:01 INFO] H101.SIG(18)
[sigmove 05:25:01 DEBUG] transformed H101Ma.SPC -> H101MA.SPC
[sigmove 05:25:01 DEBUG] transformed H101Mb.SPC -> H101MB.SPC
[sigmove 05:25:01 DEBUG] transformed H101Mc.SPC -> H101MC.SPC
[sigmove 05:25:01 DEBUG] transformed H101Md.SPC -> H101MD.SPC
[sigmove 05:25:01 DEBUG] transformed H101Me.SPC -> H101ME.SPC
[sigmove 05:25:01 DEBUG] transformed H101Mf.SPC -> H101MF.SPC
[Status 05:25:01 INFO] data for H101 transferred to science data processing
[Tidy 05:25:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:25:01 INFO] A99.FIN(19),H99.FIN(19),S99.FIN(19),T99.FIN(19),U99.FIN(19),V99.FIN(19),W99.FIN(19),X99.FIN(19),Y99.FIN(19),Z99.FIN(19),A100.FIN(19),H100.FIN(19),S100.FIN(19),T100.FIN(19),U100.FIN(19),V100.FIN(19),W100.FIN(19),X100.FIN(19),Y100.FIN(19),Z100.FIN(19)
[sigmove 05:25:01 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:25:01 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:25:03 DEBUG] done zipping
[WatchDog 05:25:03 INFO] resetting WatchDogTimer
[Status 05:25:03 INFO] Starting Set [AERI set: name A101, 6 scans, 120 angle, D28300 command]
[Ingest 05:25:03 INFO] Sending XML status message
[Status 05:25:03 INFO] Mirror angle: 120
[Mirror 05:25:03 INFO] rotating to position A
[Status 05:25:04 INFO] .SET file for ACQ96 ready
[Ingest 05:25:04 INFO] Starting acquisition
[Status 05:25:04 INFO] reading housekeeping
[Status 05:25:21 INFO] acquire complete
[Status 05:25:22 INFO] writing housekeeping
[Sequencer 05:25:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:25:22 INFO] incremented A scene to 101 completed views
[Sequencer 05:25:22 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:25:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:25:22 INFO] incremented to [AERI set: name S101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:25:22 INFO] A101.SIG(18)
[sigmove 05:25:22 DEBUG] transformed A101Ma.SPC -> A101MA.SPC
[sigmove 05:25:22 DEBUG] transformed A101Mb.SPC -> A101MB.SPC
[sigmove 05:25:22 DEBUG] transformed A101Mc.SPC -> A101MC.SPC
[sigmove 05:25:22 DEBUG] transformed A101Md.SPC -> A101MD.SPC
[sigmove 05:25:22 DEBUG] transformed A101Me.SPC -> A101ME.SPC
[sigmove 05:25:22 DEBUG] transformed A101Mf.SPC -> A101MF.SPC
[Status 05:25:22 INFO] data for A101 transferred to science data processing
[Tidy 05:25:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:25:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:25:22 INFO] resetting WatchDogTimer
[Status 05:25:22 INFO] Starting Set [AERI set: name S101, 6 scans, 0 angle, D16300 command]
[Ingest 05:25:22 INFO] Sending XML status message
[Status 05:25:22 INFO] Mirror angle: 0
[Mirror 05:25:22 INFO] rotating to position S
[Status 05:25:24 INFO] .SET file for ACQ96 ready
[Ingest 05:25:24 INFO] Starting acquisition
[Status 05:25:24 INFO] reading housekeeping
[Status 05:25:42 INFO] acquire complete
[Status 05:25:42 INFO] writing housekeeping
[Sequencer 05:25:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:25:42 INFO] incremented S scene to 101 completed views
[Sequencer 05:25:42 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:25:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:25:42 INFO] incremented to [AERI set: name T101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:25:42 INFO] S101.SIG(18)
[sigmove 05:25:42 DEBUG] transformed S101Ma.SPC -> S101MA.SPC
[sigmove 05:25:42 DEBUG] transformed S101Mb.SPC -> S101MB.SPC
[sigmove 05:25:42 DEBUG] transformed S101Mc.SPC -> S101MC.SPC
[sigmove 05:25:42 DEBUG] transformed S101Md.SPC -> S101MD.SPC
[sigmove 05:25:42 DEBUG] transformed S101Me.SPC -> S101ME.SPC
[sigmove 05:25:42 DEBUG] transformed S101Mf.SPC -> S101MF.SPC
[Status 05:25:42 INFO] data for S101 transferred to science data processing
[Tidy 05:25:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:25:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:25:42 INFO] resetting WatchDogTimer
[Status 05:25:42 INFO] Starting Set [AERI set: name T101, 6 scans, 0 angle, D16300 command]
[Ingest 05:25:42 INFO] Sending XML status message
[Status 05:25:42 INFO] Mirror angle: 0
[Mirror 05:25:43 INFO] rotating to position T
[Status 05:25:43 INFO] .SET file for ACQ96 ready
[Ingest 05:25:43 INFO] Starting acquisition
[Status 05:25:43 INFO] reading housekeeping
[Status 05:26:01 INFO] acquire complete
[Status 05:26:01 INFO] writing housekeeping
[Sequencer 05:26:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:26:01 INFO] incremented T scene to 101 completed views
[Sequencer 05:26:01 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:26:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:26:01 INFO] incremented to [AERI set: name U101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:26:01 INFO] T101.SIG(18)
[sigmove 05:26:01 DEBUG] transformed T101Ma.SPC -> T101MA.SPC
[sigmove 05:26:01 DEBUG] transformed T101Mb.SPC -> T101MB.SPC
[sigmove 05:26:01 DEBUG] transformed T101Mc.SPC -> T101MC.SPC
[sigmove 05:26:01 DEBUG] transformed T101Md.SPC -> T101MD.SPC
[sigmove 05:26:01 DEBUG] transformed T101Me.SPC -> T101ME.SPC
[sigmove 05:26:01 DEBUG] transformed T101Mf.SPC -> T101MF.SPC
[Status 05:26:01 INFO] data for T101 transferred to science data processing
[Tidy 05:26:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:26:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:26:01 INFO] resetting WatchDogTimer
[Status 05:26:01 INFO] Starting Set [AERI set: name U101, 6 scans, 0 angle, D16300 command]
[Ingest 05:26:01 INFO] Sending XML status message
[Status 05:26:01 INFO] Mirror angle: 0
[Mirror 05:26:02 INFO] rotating to position U
[Status 05:26:02 INFO] .SET file for ACQ96 ready
[Ingest 05:26:02 INFO] Starting acquisition
[Status 05:26:02 INFO] reading housekeeping
[Status 05:26:20 INFO] acquire complete
[Status 05:26:20 INFO] writing housekeeping
[Sequencer 05:26:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:26:20 INFO] incremented U scene to 101 completed views
[Sequencer 05:26:20 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:26:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:26:20 INFO] incremented to [AERI set: name V101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:26:20 INFO] U101.SIG(18)
[sigmove 05:26:20 DEBUG] transformed U101Ma.SPC -> U101MA.SPC
[sigmove 05:26:20 DEBUG] transformed U101Mb.SPC -> U101MB.SPC
[sigmove 05:26:20 DEBUG] transformed U101Mc.SPC -> U101MC.SPC
[sigmove 05:26:20 DEBUG] transformed U101Md.SPC -> U101MD.SPC
[sigmove 05:26:20 DEBUG] transformed U101Me.SPC -> U101ME.SPC
[sigmove 05:26:20 DEBUG] transformed U101Mf.SPC -> U101MF.SPC
[Status 05:26:20 INFO] data for U101 transferred to science data processing
[Tidy 05:26:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:26:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:26:20 INFO] resetting WatchDogTimer
[Status 05:26:21 INFO] Starting Set [AERI set: name V101, 6 scans, 0 angle, D16300 command]
[Ingest 05:26:21 INFO] Sending XML status message
[Status 05:26:21 INFO] Mirror angle: 0
[Mirror 05:26:21 INFO] rotating to position V
[Status 05:26:21 INFO] .SET file for ACQ96 ready
[Ingest 05:26:21 INFO] Starting acquisition
[Status 05:26:21 INFO] reading housekeeping
[Status 05:26:39 INFO] acquire complete
[Status 05:26:39 INFO] writing housekeeping
[Sequencer 05:26:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:26:39 INFO] incremented V scene to 101 completed views
[Sequencer 05:26:39 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:26:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:26:39 INFO] incremented to [AERI set: name W101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:26:39 INFO] V101.SIG(18)
[sigmove 05:26:39 DEBUG] transformed V101Ma.SPC -> V101MA.SPC
[sigmove 05:26:39 DEBUG] transformed V101Mb.SPC -> V101MB.SPC
[sigmove 05:26:39 DEBUG] transformed V101Mc.SPC -> V101MC.SPC
[sigmove 05:26:39 DEBUG] transformed V101Md.SPC -> V101MD.SPC
[sigmove 05:26:39 DEBUG] transformed V101Me.SPC -> V101ME.SPC
[sigmove 05:26:39 DEBUG] transformed V101Mf.SPC -> V101MF.SPC
[Status 05:26:39 INFO] data for V101 transferred to science data processing
[Tidy 05:26:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:26:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:26:39 INFO] resetting WatchDogTimer
[Status 05:26:40 INFO] Starting Set [AERI set: name W101, 6 scans, 0 angle, D16300 command]
[Ingest 05:26:40 INFO] Sending XML status message
[Status 05:26:40 INFO] Mirror angle: 0
[Mirror 05:26:40 INFO] rotating to position W
[Status 05:26:40 INFO] .SET file for ACQ96 ready
[Ingest 05:26:40 INFO] Starting acquisition
[Status 05:26:40 INFO] reading housekeeping
[Status 05:26:58 INFO] acquire complete
[Status 05:26:59 INFO] writing housekeeping
[Sequencer 05:26:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:26:59 INFO] incremented W scene to 101 completed views
[Sequencer 05:26:59 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:26:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:26:59 INFO] incremented to [AERI set: name X101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:26:59 INFO] W101.SIG(18)
[sigmove 05:26:59 DEBUG] transformed W101Ma.SPC -> W101MA.SPC
[sigmove 05:26:59 DEBUG] transformed W101Mb.SPC -> W101MB.SPC
[sigmove 05:26:59 DEBUG] transformed W101Mc.SPC -> W101MC.SPC
[sigmove 05:26:59 DEBUG] transformed W101Md.SPC -> W101MD.SPC
[sigmove 05:26:59 DEBUG] transformed W101Me.SPC -> W101ME.SPC
[sigmove 05:26:59 DEBUG] transformed W101Mf.SPC -> W101MF.SPC
[Status 05:26:59 INFO] data for W101 transferred to science data processing
[Tidy 05:26:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:26:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:26:59 INFO] resetting WatchDogTimer
[Status 05:26:59 INFO] Starting Set [AERI set: name X101, 6 scans, 0 angle, D16300 command]
[Ingest 05:26:59 INFO] Sending XML status message
[Status 05:26:59 INFO] Mirror angle: 0
[Mirror 05:26:59 INFO] rotating to position X
[Status 05:26:59 INFO] .SET file for ACQ96 ready
[Ingest 05:26:59 INFO] Starting acquisition
[Status 05:26:59 INFO] reading housekeeping
[Status 05:27:17 INFO] acquire complete
[Status 05:27:18 INFO] writing housekeeping
[Sequencer 05:27:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:27:18 INFO] incremented X scene to 101 completed views
[Sequencer 05:27:18 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:27:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:27:18 INFO] incremented to [AERI set: name Y101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:27:18 INFO] X101.SIG(18)
[sigmove 05:27:18 DEBUG] transformed X101Ma.SPC -> X101MA.SPC
[sigmove 05:27:18 DEBUG] transformed X101Mb.SPC -> X101MB.SPC
[sigmove 05:27:18 DEBUG] transformed X101Mc.SPC -> X101MC.SPC
[sigmove 05:27:18 DEBUG] transformed X101Md.SPC -> X101MD.SPC
[sigmove 05:27:18 DEBUG] transformed X101Me.SPC -> X101ME.SPC
[sigmove 05:27:18 DEBUG] transformed X101Mf.SPC -> X101MF.SPC
[Status 05:27:18 INFO] data for X101 transferred to science data processing
[Tidy 05:27:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:27:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:27:18 INFO] resetting WatchDogTimer
[Status 05:27:18 INFO] Starting Set [AERI set: name Y101, 6 scans, 0 angle, D16300 command]
[Ingest 05:27:18 INFO] Sending XML status message
[Status 05:27:18 INFO] Mirror angle: 0
[Mirror 05:27:18 INFO] rotating to position Y
[Status 05:27:18 INFO] .SET file for ACQ96 ready
[Ingest 05:27:18 INFO] Starting acquisition
[Status 05:27:18 INFO] reading housekeeping
[Status 05:27:36 INFO] acquire complete
[Status 05:27:37 INFO] writing housekeeping
[Sequencer 05:27:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:27:37 INFO] incremented Y scene to 101 completed views
[Sequencer 05:27:37 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:27:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:27:37 INFO] incremented to [AERI set: name Z101, 6 scans, 0 angle, D16300 command] set
[sigmove 05:27:37 INFO] Y101.SIG(18)
[sigmove 05:27:37 DEBUG] transformed Y101Ma.SPC -> Y101MA.SPC
[sigmove 05:27:37 DEBUG] transformed Y101Mb.SPC -> Y101MB.SPC
[sigmove 05:27:37 DEBUG] transformed Y101Mc.SPC -> Y101MC.SPC
[sigmove 05:27:37 DEBUG] transformed Y101Md.SPC -> Y101MD.SPC
[sigmove 05:27:37 DEBUG] transformed Y101Me.SPC -> Y101ME.SPC
[sigmove 05:27:37 DEBUG] transformed Y101Mf.SPC -> Y101MF.SPC
[Status 05:27:37 INFO] data for Y101 transferred to science data processing
[Tidy 05:27:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:27:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:27:37 INFO] resetting WatchDogTimer
[Status 05:27:37 INFO] Starting Set [AERI set: name Z101, 6 scans, 0 angle, D16300 command]
[Ingest 05:27:37 INFO] Sending XML status message
[Status 05:27:37 INFO] Mirror angle: 0
[Mirror 05:27:37 INFO] rotating to position Z
[Status 05:27:37 INFO] .SET file for ACQ96 ready
[Ingest 05:27:37 INFO] Starting acquisition
[Status 05:27:38 INFO] reading housekeeping
[Status 05:27:55 INFO] acquire complete
[Status 05:27:56 INFO] writing housekeeping
[Sequencer 05:27:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:27:56 INFO] incremented Z scene to 101 completed views
[Sequencer 05:27:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:27:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:27:56 INFO] incremented to [AERI set: name A102, 6 scans, 120 angle, D28300 command] set
[sigmove 05:27:56 INFO] Z101.SIG(18)
[sigmove 05:27:56 DEBUG] transformed Z101Ma.SPC -> Z101MA.SPC
[sigmove 05:27:56 DEBUG] transformed Z101Mb.SPC -> Z101MB.SPC
[sigmove 05:27:56 DEBUG] transformed Z101Mc.SPC -> Z101MC.SPC
[sigmove 05:27:56 DEBUG] transformed Z101Md.SPC -> Z101MD.SPC
[sigmove 05:27:56 DEBUG] transformed Z101Me.SPC -> Z101ME.SPC
[sigmove 05:27:56 DEBUG] transformed Z101Mf.SPC -> Z101MF.SPC
[Status 05:27:56 INFO] data for Z101 transferred to science data processing
[Tidy 05:27:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:27:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:27:56 INFO] resetting WatchDogTimer
[Status 05:27:56 INFO] Starting Set [AERI set: name A102, 6 scans, 120 angle, D28300 command]
[Ingest 05:27:56 INFO] Sending XML status message
[Status 05:27:56 INFO] Mirror angle: 120
[Mirror 05:27:56 INFO] rotating to position A
[Status 05:27:57 INFO] .SET file for ACQ96 ready
[Ingest 05:27:58 INFO] Starting acquisition
[Status 05:27:58 INFO] reading housekeeping
[Status 05:28:15 INFO] acquire complete
[Status 05:28:16 INFO] writing housekeeping
[Sequencer 05:28:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:28:16 INFO] incremented A scene to 102 completed views
[Sequencer 05:28:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:28:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:28:16 INFO] incremented to [AERI set: name H102, 6 scans, 60 angle, D22500 command] set
[sigmove 05:28:16 INFO] A102.SIG(18)
[sigmove 05:28:16 DEBUG] transformed A102Ma.SPC -> A102MA.SPC
[sigmove 05:28:16 DEBUG] transformed A102Mb.SPC -> A102MB.SPC
[sigmove 05:28:16 DEBUG] transformed A102Mc.SPC -> A102MC.SPC
[sigmove 05:28:16 DEBUG] transformed A102Md.SPC -> A102MD.SPC
[sigmove 05:28:16 DEBUG] transformed A102Me.SPC -> A102ME.SPC
[sigmove 05:28:16 DEBUG] transformed A102Mf.SPC -> A102MF.SPC
[Status 05:28:16 INFO] data for A102 transferred to science data processing
[Tidy 05:28:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:28:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:28:16 INFO] resetting WatchDogTimer
[Status 05:28:16 INFO] Starting Set [AERI set: name H102, 6 scans, 60 angle, D22500 command]
[Ingest 05:28:16 INFO] Sending XML status message
[Status 05:28:16 INFO] Mirror angle: 60
[Mirror 05:28:16 INFO] rotating to position H
[Status 05:28:17 INFO] .SET file for ACQ96 ready
[Ingest 05:28:17 INFO] Starting acquisition
[Status 05:28:17 INFO] reading housekeeping
[Status 05:28:36 INFO] acquire complete
[Status 05:28:36 INFO] writing housekeeping
[Sequencer 05:28:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:28:36 INFO] incremented H scene to 102 completed views
[Sequencer 05:28:36 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:28:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:28:36 INFO] incremented to [AERI set: name S102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:28:36 INFO] H102.SIG(18)
[sigmove 05:28:36 DEBUG] transformed H102Ma.SPC -> H102MA.SPC
[sigmove 05:28:36 DEBUG] transformed H102Mb.SPC -> H102MB.SPC
[sigmove 05:28:36 DEBUG] transformed H102Mc.SPC -> H102MC.SPC
[sigmove 05:28:36 DEBUG] transformed H102Md.SPC -> H102MD.SPC
[sigmove 05:28:36 DEBUG] transformed H102Me.SPC -> H102ME.SPC
[sigmove 05:28:36 DEBUG] transformed H102Mf.SPC -> H102MF.SPC
[Status 05:28:36 INFO] data for H102 transferred to science data processing
[Tidy 05:28:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:28:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:28:36 INFO] resetting WatchDogTimer
[Status 05:28:36 INFO] Starting Set [AERI set: name S102, 6 scans, 0 angle, D16300 command]
[Ingest 05:28:36 INFO] Sending XML status message
[Status 05:28:36 INFO] Mirror angle: 0
[Mirror 05:28:36 INFO] rotating to position S
[Status 05:28:37 INFO] .SET file for ACQ96 ready
[Ingest 05:28:37 INFO] Starting acquisition
[Status 05:28:38 INFO] reading housekeeping
[Status 05:28:56 INFO] acquire complete
[Status 05:28:56 INFO] writing housekeeping
[Sequencer 05:28:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:28:56 INFO] incremented S scene to 102 completed views
[Sequencer 05:28:56 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:28:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:28:56 INFO] incremented to [AERI set: name T102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:28:56 INFO] S102.SIG(18)
[sigmove 05:28:56 DEBUG] transformed S102Ma.SPC -> S102MA.SPC
[sigmove 05:28:56 DEBUG] transformed S102Mb.SPC -> S102MB.SPC
[sigmove 05:28:56 DEBUG] transformed S102Mc.SPC -> S102MC.SPC
[sigmove 05:28:56 DEBUG] transformed S102Md.SPC -> S102MD.SPC
[sigmove 05:28:56 DEBUG] transformed S102Me.SPC -> S102ME.SPC
[sigmove 05:28:56 DEBUG] transformed S102Mf.SPC -> S102MF.SPC
[Status 05:28:56 INFO] data for S102 transferred to science data processing
[Tidy 05:28:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:28:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:28:56 INFO] resetting WatchDogTimer
[Status 05:28:57 INFO] Starting Set [AERI set: name T102, 6 scans, 0 angle, D16300 command]
[Ingest 05:28:57 INFO] Sending XML status message
[Status 05:28:57 INFO] Mirror angle: 0
[Mirror 05:28:57 INFO] rotating to position T
[Status 05:28:57 INFO] .SET file for ACQ96 ready
[Ingest 05:28:57 INFO] Starting acquisition
[Status 05:28:57 INFO] reading housekeeping
[Status 05:29:15 INFO] acquire complete
[Status 05:29:16 INFO] writing housekeeping
[Sequencer 05:29:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:29:16 INFO] incremented T scene to 102 completed views
[Sequencer 05:29:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:29:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:29:16 INFO] incremented to [AERI set: name U102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:29:16 INFO] T102.SIG(18)
[sigmove 05:29:16 DEBUG] transformed T102Ma.SPC -> T102MA.SPC
[sigmove 05:29:16 DEBUG] transformed T102Mb.SPC -> T102MB.SPC
[sigmove 05:29:16 DEBUG] transformed T102Mc.SPC -> T102MC.SPC
[sigmove 05:29:16 DEBUG] transformed T102Md.SPC -> T102MD.SPC
[sigmove 05:29:16 DEBUG] transformed T102Me.SPC -> T102ME.SPC
[sigmove 05:29:16 DEBUG] transformed T102Mf.SPC -> T102MF.SPC
[Status 05:29:16 INFO] data for T102 transferred to science data processing
[Tidy 05:29:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:29:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:29:16 INFO] resetting WatchDogTimer
[Status 05:29:16 INFO] Starting Set [AERI set: name U102, 6 scans, 0 angle, D16300 command]
[Ingest 05:29:16 INFO] Sending XML status message
[Status 05:29:16 INFO] Mirror angle: 0
[Mirror 05:29:16 INFO] rotating to position U
[Status 05:29:16 INFO] .SET file for ACQ96 ready
[Ingest 05:29:17 INFO] Starting acquisition
[Status 05:29:17 INFO] reading housekeeping
[Status 05:29:34 INFO] acquire complete
[Status 05:29:35 INFO] writing housekeeping
[Sequencer 05:29:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:29:35 INFO] incremented U scene to 102 completed views
[Sequencer 05:29:35 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:29:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:29:35 INFO] incremented to [AERI set: name V102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:29:35 INFO] U102.SIG(18)
[sigmove 05:29:35 DEBUG] transformed U102Ma.SPC -> U102MA.SPC
[sigmove 05:29:35 DEBUG] transformed U102Mb.SPC -> U102MB.SPC
[sigmove 05:29:35 DEBUG] transformed U102Mc.SPC -> U102MC.SPC
[sigmove 05:29:35 DEBUG] transformed U102Md.SPC -> U102MD.SPC
[sigmove 05:29:35 DEBUG] transformed U102Me.SPC -> U102ME.SPC
[sigmove 05:29:35 DEBUG] transformed U102Mf.SPC -> U102MF.SPC
[Status 05:29:35 INFO] data for U102 transferred to science data processing
[Tidy 05:29:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:29:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:29:35 INFO] resetting WatchDogTimer
[Status 05:29:35 INFO] Starting Set [AERI set: name V102, 6 scans, 0 angle, D16300 command]
[Ingest 05:29:35 INFO] Sending XML status message
[Status 05:29:35 INFO] Mirror angle: 0
[Mirror 05:29:35 INFO] rotating to position V
[Status 05:29:35 INFO] .SET file for ACQ96 ready
[Ingest 05:29:35 INFO] Starting acquisition
[Status 05:29:35 INFO] reading housekeeping
[Status 05:29:53 INFO] acquire complete
[Status 05:29:54 INFO] writing housekeeping
[Sequencer 05:29:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:29:54 INFO] incremented V scene to 102 completed views
[Sequencer 05:29:54 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:29:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:29:54 INFO] incremented to [AERI set: name W102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:29:54 INFO] V102.SIG(18)
[sigmove 05:29:54 DEBUG] transformed V102Ma.SPC -> V102MA.SPC
[sigmove 05:29:54 DEBUG] transformed V102Mb.SPC -> V102MB.SPC
[sigmove 05:29:54 DEBUG] transformed V102Mc.SPC -> V102MC.SPC
[sigmove 05:29:54 DEBUG] transformed V102Md.SPC -> V102MD.SPC
[sigmove 05:29:54 DEBUG] transformed V102Me.SPC -> V102ME.SPC
[sigmove 05:29:54 DEBUG] transformed V102Mf.SPC -> V102MF.SPC
[Status 05:29:54 INFO] data for V102 transferred to science data processing
[Tidy 05:29:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:29:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:29:54 INFO] resetting WatchDogTimer
[Status 05:29:54 INFO] Starting Set [AERI set: name W102, 6 scans, 0 angle, D16300 command]
[Ingest 05:29:54 INFO] Sending XML status message
[Status 05:29:54 INFO] Mirror angle: 0
[Mirror 05:29:54 INFO] rotating to position W
[Status 05:29:54 INFO] .SET file for ACQ96 ready
[Ingest 05:29:54 INFO] Starting acquisition
[Status 05:29:55 INFO] reading housekeeping
[Status 05:30:12 INFO] acquire complete
[Status 05:30:13 INFO] writing housekeeping
[Sequencer 05:30:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:30:13 INFO] incremented W scene to 102 completed views
[Sequencer 05:30:13 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:30:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:30:13 INFO] incremented to [AERI set: name X102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:30:13 INFO] W102.SIG(18)
[sigmove 05:30:13 DEBUG] transformed W102Ma.SPC -> W102MA.SPC
[sigmove 05:30:13 DEBUG] transformed W102Mb.SPC -> W102MB.SPC
[sigmove 05:30:13 DEBUG] transformed W102Mc.SPC -> W102MC.SPC
[sigmove 05:30:13 DEBUG] transformed W102Md.SPC -> W102MD.SPC
[sigmove 05:30:13 DEBUG] transformed W102Me.SPC -> W102ME.SPC
[sigmove 05:30:13 DEBUG] transformed W102Mf.SPC -> W102MF.SPC
[Status 05:30:13 INFO] data for W102 transferred to science data processing
[Tidy 05:30:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:30:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:30:13 INFO] resetting WatchDogTimer
[Status 05:30:13 INFO] Starting Set [AERI set: name X102, 6 scans, 0 angle, D16300 command]
[Ingest 05:30:13 INFO] Sending XML status message
[Status 05:30:13 INFO] Mirror angle: 0
[Mirror 05:30:13 INFO] rotating to position X
[Status 05:30:13 INFO] .SET file for ACQ96 ready
[Ingest 05:30:13 INFO] Starting acquisition
[Status 05:30:14 INFO] reading housekeeping
[Status 05:30:31 INFO] acquire complete
[Status 05:30:32 INFO] writing housekeeping
[Sequencer 05:30:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:30:32 INFO] incremented X scene to 102 completed views
[Sequencer 05:30:32 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:30:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:30:32 INFO] incremented to [AERI set: name Y102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:30:32 INFO] X102.SIG(18)
[sigmove 05:30:32 DEBUG] transformed X102Ma.SPC -> X102MA.SPC
[sigmove 05:30:32 DEBUG] transformed X102Mb.SPC -> X102MB.SPC
[sigmove 05:30:32 DEBUG] transformed X102Mc.SPC -> X102MC.SPC
[sigmove 05:30:32 DEBUG] transformed X102Md.SPC -> X102MD.SPC
[sigmove 05:30:32 DEBUG] transformed X102Me.SPC -> X102ME.SPC
[sigmove 05:30:32 DEBUG] transformed X102Mf.SPC -> X102MF.SPC
[Status 05:30:32 INFO] data for X102 transferred to science data processing
[Tidy 05:30:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:30:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:30:32 INFO] resetting WatchDogTimer
[Status 05:30:32 INFO] Starting Set [AERI set: name Y102, 6 scans, 0 angle, D16300 command]
[Ingest 05:30:32 INFO] Sending XML status message
[Status 05:30:32 INFO] Mirror angle: 0
[Mirror 05:30:32 INFO] rotating to position Y
[Status 05:30:32 INFO] .SET file for ACQ96 ready
[Ingest 05:30:33 INFO] Starting acquisition
[Status 05:30:33 INFO] reading housekeeping
[Status 05:30:50 INFO] acquire complete
[Status 05:30:51 INFO] writing housekeeping
[Sequencer 05:30:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:30:51 INFO] incremented Y scene to 102 completed views
[Sequencer 05:30:51 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:30:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:30:51 INFO] incremented to [AERI set: name Z102, 6 scans, 0 angle, D16300 command] set
[sigmove 05:30:51 INFO] Y102.SIG(18)
[sigmove 05:30:51 DEBUG] transformed Y102Ma.SPC -> Y102MA.SPC
[sigmove 05:30:51 DEBUG] transformed Y102Mb.SPC -> Y102MB.SPC
[sigmove 05:30:51 DEBUG] transformed Y102Mc.SPC -> Y102MC.SPC
[sigmove 05:30:51 DEBUG] transformed Y102Md.SPC -> Y102MD.SPC
[sigmove 05:30:51 DEBUG] transformed Y102Me.SPC -> Y102ME.SPC
[sigmove 05:30:51 DEBUG] transformed Y102Mf.SPC -> Y102MF.SPC
[Status 05:30:51 INFO] data for Y102 transferred to science data processing
[Tidy 05:30:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:30:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:30:51 INFO] resetting WatchDogTimer
[Status 05:30:51 INFO] Starting Set [AERI set: name Z102, 6 scans, 0 angle, D16300 command]
[Ingest 05:30:51 INFO] Sending XML status message
[Status 05:30:51 INFO] Mirror angle: 0
[Mirror 05:30:51 INFO] rotating to position Z
[Status 05:30:51 INFO] .SET file for ACQ96 ready
[Ingest 05:30:52 INFO] Starting acquisition
[Status 05:30:52 INFO] reading housekeeping
[Status 05:31:09 INFO] acquire complete
[Status 05:31:10 INFO] writing housekeeping
[Sequencer 05:31:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:31:10 INFO] incremented Z scene to 102 completed views
[Sequencer 05:31:10 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:31:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:31:10 INFO] incremented to [AERI set: name H103, 6 scans, 60 angle, D22500 command] set
[sigmove 05:31:10 INFO] Z102.SIG(18)
[sigmove 05:31:10 DEBUG] transformed Z102Ma.SPC -> Z102MA.SPC
[sigmove 05:31:10 DEBUG] transformed Z102Mb.SPC -> Z102MB.SPC
[sigmove 05:31:10 DEBUG] transformed Z102Mc.SPC -> Z102MC.SPC
[sigmove 05:31:10 DEBUG] transformed Z102Md.SPC -> Z102MD.SPC
[sigmove 05:31:10 DEBUG] transformed Z102Me.SPC -> Z102ME.SPC
[sigmove 05:31:10 DEBUG] transformed Z102Mf.SPC -> Z102MF.SPC
[Status 05:31:10 INFO] data for Z102 transferred to science data processing
[Tidy 05:31:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:31:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:31:10 INFO] resetting WatchDogTimer
[Status 05:31:10 INFO] Starting Set [AERI set: name H103, 6 scans, 60 angle, D22500 command]
[Ingest 05:31:10 INFO] Sending XML status message
[Status 05:31:10 INFO] Mirror angle: 60
[Mirror 05:31:10 INFO] rotating to position H
[Status 05:31:11 INFO] .SET file for ACQ96 ready
[Ingest 05:31:11 INFO] Starting acquisition
[Status 05:31:11 INFO] reading housekeeping
[Status 05:31:30 INFO] acquire complete
[Status 05:31:30 INFO] writing housekeeping
[Sequencer 05:31:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:31:30 INFO] incremented H scene to 103 completed views
[Sequencer 05:31:30 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:31:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:31:30 INFO] incremented to [AERI set: name A103, 6 scans, 120 angle, D28300 command] set
[sigmove 05:31:30 INFO] H103.SIG(18)
[sigmove 05:31:30 DEBUG] transformed H103Ma.SPC -> H103MA.SPC
[sigmove 05:31:30 DEBUG] transformed H103Mb.SPC -> H103MB.SPC
[sigmove 05:31:30 DEBUG] transformed H103Mc.SPC -> H103MC.SPC
[sigmove 05:31:30 DEBUG] transformed H103Md.SPC -> H103MD.SPC
[sigmove 05:31:30 DEBUG] transformed H103Me.SPC -> H103ME.SPC
[sigmove 05:31:30 DEBUG] transformed H103Mf.SPC -> H103MF.SPC
[Status 05:31:30 INFO] data for H103 transferred to science data processing
[Tidy 05:31:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:31:30 INFO] A101.FIN(19),H101.FIN(19),S101.FIN(19),T101.FIN(19),U101.FIN(19),V101.FIN(19),W101.FIN(19),X101.FIN(19),Y101.FIN(19),Z101.FIN(19),A102.FIN(19),H102.FIN(19),S102.FIN(19),T102.FIN(19),U102.FIN(19),V102.FIN(19),W102.FIN(19),X102.FIN(19),Y102.FIN(19),Z102.FIN(19)
[sigmove 05:31:30 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:31:30 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:31:32 DEBUG] done zipping
[WatchDog 05:31:32 INFO] resetting WatchDogTimer
[Status 05:31:32 INFO] Starting Set [AERI set: name A103, 6 scans, 120 angle, D28300 command]
[Ingest 05:31:32 INFO] Sending XML status message
[Status 05:31:32 INFO] Mirror angle: 120
[Mirror 05:31:33 INFO] rotating to position A
[Status 05:31:33 INFO] .SET file for ACQ96 ready
[Ingest 05:31:33 INFO] Starting acquisition
[Status 05:31:34 INFO] reading housekeeping
[Status 05:31:51 INFO] acquire complete
[Status 05:31:52 INFO] writing housekeeping
[Sequencer 05:31:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:31:52 INFO] incremented A scene to 103 completed views
[Sequencer 05:31:52 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:31:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:31:52 INFO] incremented to [AERI set: name S103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:31:52 INFO] A103.SIG(18)
[sigmove 05:31:52 DEBUG] transformed A103Ma.SPC -> A103MA.SPC
[sigmove 05:31:52 DEBUG] transformed A103Mb.SPC -> A103MB.SPC
[sigmove 05:31:52 DEBUG] transformed A103Mc.SPC -> A103MC.SPC
[sigmove 05:31:52 DEBUG] transformed A103Md.SPC -> A103MD.SPC
[sigmove 05:31:52 DEBUG] transformed A103Me.SPC -> A103ME.SPC
[sigmove 05:31:52 DEBUG] transformed A103Mf.SPC -> A103MF.SPC
[Status 05:31:52 INFO] data for A103 transferred to science data processing
[Tidy 05:31:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:31:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:31:52 INFO] resetting WatchDogTimer
[Status 05:31:52 INFO] Starting Set [AERI set: name S103, 6 scans, 0 angle, D16300 command]
[Ingest 05:31:52 INFO] Sending XML status message
[Status 05:31:52 INFO] Mirror angle: 0
[Mirror 05:31:52 INFO] rotating to position S
[Status 05:31:53 INFO] .SET file for ACQ96 ready
[Ingest 05:31:53 INFO] Starting acquisition
[Status 05:31:53 INFO] reading housekeeping
[Status 05:32:11 INFO] acquire complete
[Status 05:32:12 INFO] writing housekeeping
[Sequencer 05:32:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:32:12 INFO] incremented S scene to 103 completed views
[Sequencer 05:32:12 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:32:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:32:12 INFO] incremented to [AERI set: name T103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:32:12 INFO] S103.SIG(18)
[sigmove 05:32:12 DEBUG] transformed S103Ma.SPC -> S103MA.SPC
[sigmove 05:32:12 DEBUG] transformed S103Mb.SPC -> S103MB.SPC
[sigmove 05:32:12 DEBUG] transformed S103Mc.SPC -> S103MC.SPC
[sigmove 05:32:12 DEBUG] transformed S103Md.SPC -> S103MD.SPC
[sigmove 05:32:12 DEBUG] transformed S103Me.SPC -> S103ME.SPC
[sigmove 05:32:12 DEBUG] transformed S103Mf.SPC -> S103MF.SPC
[Status 05:32:12 INFO] data for S103 transferred to science data processing
[Tidy 05:32:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:32:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:32:12 INFO] resetting WatchDogTimer
[Status 05:32:12 INFO] Starting Set [AERI set: name T103, 6 scans, 0 angle, D16300 command]
[Ingest 05:32:12 INFO] Sending XML status message
[Status 05:32:12 INFO] Mirror angle: 0
[Mirror 05:32:12 INFO] rotating to position T
[Status 05:32:12 INFO] .SET file for ACQ96 ready
[Ingest 05:32:12 INFO] Starting acquisition
[Status 05:32:13 INFO] reading housekeeping
[Status 05:32:30 INFO] acquire complete
[Status 05:32:31 INFO] writing housekeeping
[Sequencer 05:32:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:32:31 INFO] incremented T scene to 103 completed views
[Sequencer 05:32:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:32:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:32:31 INFO] incremented to [AERI set: name U103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:32:31 INFO] T103.SIG(18)
[sigmove 05:32:31 DEBUG] transformed T103Ma.SPC -> T103MA.SPC
[sigmove 05:32:31 DEBUG] transformed T103Mb.SPC -> T103MB.SPC
[sigmove 05:32:31 DEBUG] transformed T103Mc.SPC -> T103MC.SPC
[sigmove 05:32:31 DEBUG] transformed T103Md.SPC -> T103MD.SPC
[sigmove 05:32:31 DEBUG] transformed T103Me.SPC -> T103ME.SPC
[sigmove 05:32:31 DEBUG] transformed T103Mf.SPC -> T103MF.SPC
[Status 05:32:31 INFO] data for T103 transferred to science data processing
[Tidy 05:32:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:32:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:32:31 INFO] resetting WatchDogTimer
[Status 05:32:31 INFO] Starting Set [AERI set: name U103, 6 scans, 0 angle, D16300 command]
[Ingest 05:32:31 INFO] Sending XML status message
[Status 05:32:31 INFO] Mirror angle: 0
[Mirror 05:32:31 INFO] rotating to position U
[Status 05:32:31 INFO] .SET file for ACQ96 ready
[Ingest 05:32:32 INFO] Starting acquisition
[Status 05:32:32 INFO] reading housekeeping
[Status 05:32:49 INFO] acquire complete
[Status 05:32:50 INFO] writing housekeeping
[Sequencer 05:32:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:32:50 INFO] incremented U scene to 103 completed views
[Sequencer 05:32:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:32:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:32:50 INFO] incremented to [AERI set: name V103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:32:50 INFO] U103.SIG(18)
[sigmove 05:32:50 DEBUG] transformed U103Ma.SPC -> U103MA.SPC
[sigmove 05:32:50 DEBUG] transformed U103Mb.SPC -> U103MB.SPC
[sigmove 05:32:50 DEBUG] transformed U103Mc.SPC -> U103MC.SPC
[sigmove 05:32:50 DEBUG] transformed U103Md.SPC -> U103MD.SPC
[sigmove 05:32:50 DEBUG] transformed U103Me.SPC -> U103ME.SPC
[sigmove 05:32:50 DEBUG] transformed U103Mf.SPC -> U103MF.SPC
[Status 05:32:50 INFO] data for U103 transferred to science data processing
[Tidy 05:32:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:32:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:32:50 INFO] resetting WatchDogTimer
[Status 05:32:50 INFO] Starting Set [AERI set: name V103, 6 scans, 0 angle, D16300 command]
[Ingest 05:32:50 INFO] Sending XML status message
[Status 05:32:50 INFO] Mirror angle: 0
[Mirror 05:32:50 INFO] rotating to position V
[Status 05:32:50 INFO] .SET file for ACQ96 ready
[Ingest 05:32:51 INFO] Starting acquisition
[Status 05:32:51 INFO] reading housekeeping
[Status 05:33:08 INFO] acquire complete
[Status 05:33:09 INFO] writing housekeeping
[Sequencer 05:33:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:33:09 INFO] incremented V scene to 103 completed views
[Sequencer 05:33:09 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:33:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:33:09 INFO] incremented to [AERI set: name W103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:33:09 INFO] V103.SIG(18)
[sigmove 05:33:09 DEBUG] transformed V103Ma.SPC -> V103MA.SPC
[sigmove 05:33:09 DEBUG] transformed V103Mb.SPC -> V103MB.SPC
[sigmove 05:33:09 DEBUG] transformed V103Mc.SPC -> V103MC.SPC
[sigmove 05:33:09 DEBUG] transformed V103Md.SPC -> V103MD.SPC
[sigmove 05:33:09 DEBUG] transformed V103Me.SPC -> V103ME.SPC
[sigmove 05:33:09 DEBUG] transformed V103Mf.SPC -> V103MF.SPC
[Status 05:33:09 INFO] data for V103 transferred to science data processing
[Tidy 05:33:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:33:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:33:09 INFO] resetting WatchDogTimer
[Status 05:33:09 INFO] Starting Set [AERI set: name W103, 6 scans, 0 angle, D16300 command]
[Ingest 05:33:09 INFO] Sending XML status message
[Status 05:33:09 INFO] Mirror angle: 0
[Mirror 05:33:09 INFO] rotating to position W
[Status 05:33:10 INFO] .SET file for ACQ96 ready
[Ingest 05:33:10 INFO] Starting acquisition
[Status 05:33:10 INFO] reading housekeeping
[Status 05:33:28 INFO] acquire complete
[Status 05:33:28 INFO] writing housekeeping
[Sequencer 05:33:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:33:28 INFO] incremented W scene to 103 completed views
[Sequencer 05:33:28 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:33:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:33:28 INFO] incremented to [AERI set: name X103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:33:28 INFO] W103.SIG(18)
[sigmove 05:33:28 DEBUG] transformed W103Ma.SPC -> W103MA.SPC
[sigmove 05:33:28 DEBUG] transformed W103Mb.SPC -> W103MB.SPC
[sigmove 05:33:28 DEBUG] transformed W103Mc.SPC -> W103MC.SPC
[sigmove 05:33:28 DEBUG] transformed W103Md.SPC -> W103MD.SPC
[sigmove 05:33:28 DEBUG] transformed W103Me.SPC -> W103ME.SPC
[sigmove 05:33:28 DEBUG] transformed W103Mf.SPC -> W103MF.SPC
[Status 05:33:28 INFO] data for W103 transferred to science data processing
[Tidy 05:33:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:33:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:33:28 INFO] resetting WatchDogTimer
[Status 05:33:28 INFO] Starting Set [AERI set: name X103, 6 scans, 0 angle, D16300 command]
[Ingest 05:33:28 INFO] Sending XML status message
[Status 05:33:28 INFO] Mirror angle: 0
[Mirror 05:33:28 INFO] rotating to position X
[Status 05:33:29 INFO] .SET file for ACQ96 ready
[Ingest 05:33:29 INFO] Starting acquisition
[Status 05:33:29 INFO] reading housekeeping
[Status 05:33:47 INFO] acquire complete
[Status 05:33:47 INFO] writing housekeeping
[Sequencer 05:33:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:33:47 INFO] incremented X scene to 103 completed views
[Sequencer 05:33:47 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:33:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:33:47 INFO] incremented to [AERI set: name Y103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:33:47 INFO] X103.SIG(18)
[sigmove 05:33:47 DEBUG] transformed X103Ma.SPC -> X103MA.SPC
[sigmove 05:33:47 DEBUG] transformed X103Mb.SPC -> X103MB.SPC
[sigmove 05:33:47 DEBUG] transformed X103Mc.SPC -> X103MC.SPC
[sigmove 05:33:47 DEBUG] transformed X103Md.SPC -> X103MD.SPC
[sigmove 05:33:47 DEBUG] transformed X103Me.SPC -> X103ME.SPC
[sigmove 05:33:47 DEBUG] transformed X103Mf.SPC -> X103MF.SPC
[Status 05:33:47 INFO] data for X103 transferred to science data processing
[Tidy 05:33:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:33:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:33:47 INFO] resetting WatchDogTimer
[Status 05:33:47 INFO] Starting Set [AERI set: name Y103, 6 scans, 0 angle, D16300 command]
[Ingest 05:33:47 INFO] Sending XML status message
[Status 05:33:47 INFO] Mirror angle: 0
[Mirror 05:33:47 INFO] rotating to position Y
[Status 05:33:48 INFO] .SET file for ACQ96 ready
[Ingest 05:33:48 INFO] Starting acquisition
[Status 05:33:48 INFO] reading housekeeping
[Status 05:34:06 INFO] acquire complete
[Status 05:34:06 INFO] writing housekeeping
[Sequencer 05:34:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:34:06 INFO] incremented Y scene to 103 completed views
[Sequencer 05:34:06 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:34:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:34:06 INFO] incremented to [AERI set: name Z103, 6 scans, 0 angle, D16300 command] set
[sigmove 05:34:06 INFO] Y103.SIG(18)
[sigmove 05:34:06 DEBUG] transformed Y103Ma.SPC -> Y103MA.SPC
[sigmove 05:34:06 DEBUG] transformed Y103Mb.SPC -> Y103MB.SPC
[sigmove 05:34:06 DEBUG] transformed Y103Mc.SPC -> Y103MC.SPC
[sigmove 05:34:06 DEBUG] transformed Y103Md.SPC -> Y103MD.SPC
[sigmove 05:34:06 DEBUG] transformed Y103Me.SPC -> Y103ME.SPC
[sigmove 05:34:06 DEBUG] transformed Y103Mf.SPC -> Y103MF.SPC
[Status 05:34:06 INFO] data for Y103 transferred to science data processing
[Tidy 05:34:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:34:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:34:06 INFO] resetting WatchDogTimer
[Status 05:34:06 INFO] Starting Set [AERI set: name Z103, 6 scans, 0 angle, D16300 command]
[Ingest 05:34:06 INFO] Sending XML status message
[Status 05:34:06 INFO] Mirror angle: 0
[Mirror 05:34:07 INFO] rotating to position Z
[Status 05:34:07 INFO] .SET file for ACQ96 ready
[Ingest 05:34:07 INFO] Starting acquisition
[Status 05:34:07 INFO] reading housekeeping
[Status 05:34:25 INFO] acquire complete
[Status 05:34:25 INFO] writing housekeeping
[Sequencer 05:34:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:34:25 INFO] incremented Z scene to 103 completed views
[Sequencer 05:34:25 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:34:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:34:25 INFO] incremented to [AERI set: name A104, 6 scans, 120 angle, D28300 command] set
[sigmove 05:34:25 INFO] Z103.SIG(18)
[sigmove 05:34:25 DEBUG] transformed Z103Ma.SPC -> Z103MA.SPC
[sigmove 05:34:25 DEBUG] transformed Z103Mb.SPC -> Z103MB.SPC
[sigmove 05:34:25 DEBUG] transformed Z103Mc.SPC -> Z103MC.SPC
[sigmove 05:34:25 DEBUG] transformed Z103Md.SPC -> Z103MD.SPC
[sigmove 05:34:25 DEBUG] transformed Z103Me.SPC -> Z103ME.SPC
[sigmove 05:34:25 DEBUG] transformed Z103Mf.SPC -> Z103MF.SPC
[Status 05:34:25 INFO] data for Z103 transferred to science data processing
[Tidy 05:34:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:34:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:34:25 INFO] resetting WatchDogTimer
[Status 05:34:25 INFO] Starting Set [AERI set: name A104, 6 scans, 120 angle, D28300 command]
[Ingest 05:34:25 INFO] Sending XML status message
[Status 05:34:25 INFO] Mirror angle: 120
[Mirror 05:34:26 INFO] rotating to position A
[Status 05:34:27 INFO] .SET file for ACQ96 ready
[Ingest 05:34:27 INFO] Starting acquisition
[Status 05:34:27 INFO] reading housekeeping
[Status 05:34:45 INFO] acquire complete
[Status 05:34:46 INFO] writing housekeeping
[Sequencer 05:34:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:34:46 INFO] incremented A scene to 104 completed views
[Sequencer 05:34:46 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:34:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:34:46 INFO] incremented to [AERI set: name H104, 6 scans, 60 angle, D22500 command] set
[sigmove 05:34:46 INFO] A104.SIG(18)
[sigmove 05:34:46 DEBUG] transformed A104Ma.SPC -> A104MA.SPC
[sigmove 05:34:46 DEBUG] transformed A104Mb.SPC -> A104MB.SPC
[sigmove 05:34:46 DEBUG] transformed A104Mc.SPC -> A104MC.SPC
[sigmove 05:34:46 DEBUG] transformed A104Md.SPC -> A104MD.SPC
[sigmove 05:34:46 DEBUG] transformed A104Me.SPC -> A104ME.SPC
[sigmove 05:34:46 DEBUG] transformed A104Mf.SPC -> A104MF.SPC
[Status 05:34:46 INFO] data for A104 transferred to science data processing
[Tidy 05:34:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:34:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:34:46 INFO] resetting WatchDogTimer
[Status 05:34:46 INFO] Starting Set [AERI set: name H104, 6 scans, 60 angle, D22500 command]
[Ingest 05:34:46 INFO] Sending XML status message
[Status 05:34:46 INFO] Mirror angle: 60
[Mirror 05:34:46 INFO] rotating to position H
[Status 05:34:47 INFO] .SET file for ACQ96 ready
[Ingest 05:34:47 INFO] Starting acquisition
[Status 05:34:47 INFO] reading housekeeping
[Status 05:35:05 INFO] acquire complete
[Status 05:35:06 INFO] writing housekeeping
[Sequencer 05:35:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:35:06 INFO] incremented H scene to 104 completed views
[Sequencer 05:35:06 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:35:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:35:06 INFO] incremented to [AERI set: name S104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:35:06 INFO] H104.SIG(18)
[sigmove 05:35:06 DEBUG] transformed H104Ma.SPC -> H104MA.SPC
[sigmove 05:35:06 DEBUG] transformed H104Mb.SPC -> H104MB.SPC
[sigmove 05:35:06 DEBUG] transformed H104Mc.SPC -> H104MC.SPC
[sigmove 05:35:06 DEBUG] transformed H104Md.SPC -> H104MD.SPC
[sigmove 05:35:06 DEBUG] transformed H104Me.SPC -> H104ME.SPC
[sigmove 05:35:06 DEBUG] transformed H104Mf.SPC -> H104MF.SPC
[Status 05:35:06 INFO] data for H104 transferred to science data processing
[Tidy 05:35:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:35:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:35:06 INFO] resetting WatchDogTimer
[Status 05:35:06 INFO] Starting Set [AERI set: name S104, 6 scans, 0 angle, D16300 command]
[Ingest 05:35:06 INFO] Sending XML status message
[Status 05:35:06 INFO] Mirror angle: 0
[Mirror 05:35:06 INFO] rotating to position S
[Status 05:35:07 INFO] .SET file for ACQ96 ready
[Ingest 05:35:07 INFO] Starting acquisition
[Status 05:35:07 INFO] reading housekeeping
[Status 05:35:25 INFO] acquire complete
[Status 05:35:26 INFO] writing housekeeping
[Sequencer 05:35:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:35:26 INFO] incremented S scene to 104 completed views
[Sequencer 05:35:26 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:35:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:35:26 INFO] incremented to [AERI set: name T104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:35:26 INFO] S104.SIG(18)
[sigmove 05:35:26 DEBUG] transformed S104Ma.SPC -> S104MA.SPC
[sigmove 05:35:26 DEBUG] transformed S104Mb.SPC -> S104MB.SPC
[sigmove 05:35:26 DEBUG] transformed S104Mc.SPC -> S104MC.SPC
[sigmove 05:35:26 DEBUG] transformed S104Md.SPC -> S104MD.SPC
[sigmove 05:35:26 DEBUG] transformed S104Me.SPC -> S104ME.SPC
[sigmove 05:35:26 DEBUG] transformed S104Mf.SPC -> S104MF.SPC
[Status 05:35:26 INFO] data for S104 transferred to science data processing
[Tidy 05:35:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:35:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:35:26 INFO] resetting WatchDogTimer
[Status 05:35:26 INFO] Starting Set [AERI set: name T104, 6 scans, 0 angle, D16300 command]
[Ingest 05:35:26 INFO] Sending XML status message
[Status 05:35:26 INFO] Mirror angle: 0
[Mirror 05:35:26 INFO] rotating to position T
[Status 05:35:26 INFO] .SET file for ACQ96 ready
[Ingest 05:35:27 INFO] Starting acquisition
[Status 05:35:27 INFO] reading housekeeping
[Status 05:35:45 INFO] acquire complete
[Status 05:35:45 INFO] writing housekeeping
[Sequencer 05:35:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:35:45 INFO] incremented T scene to 104 completed views
[Sequencer 05:35:45 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:35:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:35:45 INFO] incremented to [AERI set: name U104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:35:45 INFO] T104.SIG(18)
[sigmove 05:35:45 DEBUG] transformed T104Ma.SPC -> T104MA.SPC
[sigmove 05:35:45 DEBUG] transformed T104Mb.SPC -> T104MB.SPC
[sigmove 05:35:45 DEBUG] transformed T104Mc.SPC -> T104MC.SPC
[sigmove 05:35:45 DEBUG] transformed T104Md.SPC -> T104MD.SPC
[sigmove 05:35:45 DEBUG] transformed T104Me.SPC -> T104ME.SPC
[sigmove 05:35:45 DEBUG] transformed T104Mf.SPC -> T104MF.SPC
[Status 05:35:45 INFO] data for T104 transferred to science data processing
[Tidy 05:35:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:35:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:35:45 INFO] resetting WatchDogTimer
[Status 05:35:45 INFO] Starting Set [AERI set: name U104, 6 scans, 0 angle, D16300 command]
[Ingest 05:35:45 INFO] Sending XML status message
[Status 05:35:45 INFO] Mirror angle: 0
[Mirror 05:35:45 INFO] rotating to position U
[Status 05:35:46 INFO] .SET file for ACQ96 ready
[Ingest 05:35:46 INFO] Starting acquisition
[Status 05:35:46 INFO] reading housekeeping
[Status 05:36:04 INFO] acquire complete
[Status 05:36:04 INFO] writing housekeeping
[Sequencer 05:36:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:36:04 INFO] incremented U scene to 104 completed views
[Sequencer 05:36:04 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:36:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:36:04 INFO] incremented to [AERI set: name V104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:36:04 INFO] U104.SIG(18)
[sigmove 05:36:04 DEBUG] transformed U104Ma.SPC -> U104MA.SPC
[sigmove 05:36:04 DEBUG] transformed U104Mb.SPC -> U104MB.SPC
[sigmove 05:36:04 DEBUG] transformed U104Mc.SPC -> U104MC.SPC
[sigmove 05:36:04 DEBUG] transformed U104Md.SPC -> U104MD.SPC
[sigmove 05:36:04 DEBUG] transformed U104Me.SPC -> U104ME.SPC
[sigmove 05:36:04 DEBUG] transformed U104Mf.SPC -> U104MF.SPC
[Status 05:36:04 INFO] data for U104 transferred to science data processing
[Tidy 05:36:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:36:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:36:04 INFO] resetting WatchDogTimer
[Status 05:36:04 INFO] Starting Set [AERI set: name V104, 6 scans, 0 angle, D16300 command]
[Ingest 05:36:04 INFO] Sending XML status message
[Status 05:36:04 INFO] Mirror angle: 0
[Mirror 05:36:04 INFO] rotating to position V
[Status 05:36:05 INFO] .SET file for ACQ96 ready
[Ingest 05:36:05 INFO] Starting acquisition
[Status 05:36:05 INFO] reading housekeeping
[Status 05:36:23 INFO] acquire complete
[Status 05:36:23 INFO] writing housekeeping
[Sequencer 05:36:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:36:23 INFO] incremented V scene to 104 completed views
[Sequencer 05:36:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:36:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:36:23 INFO] incremented to [AERI set: name W104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:36:23 INFO] V104.SIG(18)
[sigmove 05:36:23 DEBUG] transformed V104Ma.SPC -> V104MA.SPC
[sigmove 05:36:23 DEBUG] transformed V104Mb.SPC -> V104MB.SPC
[sigmove 05:36:23 DEBUG] transformed V104Mc.SPC -> V104MC.SPC
[sigmove 05:36:23 DEBUG] transformed V104Md.SPC -> V104MD.SPC
[sigmove 05:36:23 DEBUG] transformed V104Me.SPC -> V104ME.SPC
[sigmove 05:36:23 DEBUG] transformed V104Mf.SPC -> V104MF.SPC
[Status 05:36:23 INFO] data for V104 transferred to science data processing
[Tidy 05:36:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:36:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:36:23 INFO] resetting WatchDogTimer
[Status 05:36:23 INFO] Starting Set [AERI set: name W104, 6 scans, 0 angle, D16300 command]
[Ingest 05:36:23 INFO] Sending XML status message
[Status 05:36:23 INFO] Mirror angle: 0
[Mirror 05:36:24 INFO] rotating to position W
[Status 05:36:24 INFO] .SET file for ACQ96 ready
[Ingest 05:36:24 INFO] Starting acquisition
[Status 05:36:24 INFO] reading housekeeping
[Status 05:36:42 INFO] acquire complete
[Status 05:36:42 INFO] writing housekeeping
[Sequencer 05:36:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:36:42 INFO] incremented W scene to 104 completed views
[Sequencer 05:36:42 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:36:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:36:42 INFO] incremented to [AERI set: name X104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:36:42 INFO] W104.SIG(18)
[sigmove 05:36:42 DEBUG] transformed W104Ma.SPC -> W104MA.SPC
[sigmove 05:36:42 DEBUG] transformed W104Mb.SPC -> W104MB.SPC
[sigmove 05:36:42 DEBUG] transformed W104Mc.SPC -> W104MC.SPC
[sigmove 05:36:42 DEBUG] transformed W104Md.SPC -> W104MD.SPC
[sigmove 05:36:42 DEBUG] transformed W104Me.SPC -> W104ME.SPC
[sigmove 05:36:42 DEBUG] transformed W104Mf.SPC -> W104MF.SPC
[Status 05:36:42 INFO] data for W104 transferred to science data processing
[Tidy 05:36:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:36:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:36:42 INFO] resetting WatchDogTimer
[Status 05:36:42 INFO] Starting Set [AERI set: name X104, 6 scans, 0 angle, D16300 command]
[Ingest 05:36:42 INFO] Sending XML status message
[Status 05:36:42 INFO] Mirror angle: 0
[Mirror 05:36:43 INFO] rotating to position X
[Status 05:36:43 INFO] .SET file for ACQ96 ready
[Ingest 05:36:43 INFO] Starting acquisition
[Status 05:36:43 INFO] reading housekeeping
[Status 05:37:01 INFO] acquire complete
[Status 05:37:01 INFO] writing housekeeping
[Sequencer 05:37:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:37:01 INFO] incremented X scene to 104 completed views
[Sequencer 05:37:01 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:37:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:37:01 INFO] incremented to [AERI set: name Y104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:37:01 INFO] X104.SIG(18)
[sigmove 05:37:01 DEBUG] transformed X104Ma.SPC -> X104MA.SPC
[sigmove 05:37:01 DEBUG] transformed X104Mb.SPC -> X104MB.SPC
[sigmove 05:37:01 DEBUG] transformed X104Mc.SPC -> X104MC.SPC
[sigmove 05:37:01 DEBUG] transformed X104Md.SPC -> X104MD.SPC
[sigmove 05:37:01 DEBUG] transformed X104Me.SPC -> X104ME.SPC
[sigmove 05:37:01 DEBUG] transformed X104Mf.SPC -> X104MF.SPC
[Status 05:37:01 INFO] data for X104 transferred to science data processing
[Tidy 05:37:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:37:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:37:01 INFO] resetting WatchDogTimer
[Status 05:37:01 INFO] Starting Set [AERI set: name Y104, 6 scans, 0 angle, D16300 command]
[Ingest 05:37:02 INFO] Sending XML status message
[Status 05:37:02 INFO] Mirror angle: 0
[Mirror 05:37:02 INFO] rotating to position Y
[Status 05:37:02 INFO] .SET file for ACQ96 ready
[Ingest 05:37:02 INFO] Starting acquisition
[Status 05:37:02 INFO] reading housekeeping
[Status 05:37:20 INFO] acquire complete
[Status 05:37:20 INFO] writing housekeeping
[Sequencer 05:37:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:37:20 INFO] incremented Y scene to 104 completed views
[Sequencer 05:37:20 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:37:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:37:20 INFO] incremented to [AERI set: name Z104, 6 scans, 0 angle, D16300 command] set
[sigmove 05:37:20 INFO] Y104.SIG(18)
[sigmove 05:37:20 DEBUG] transformed Y104Ma.SPC -> Y104MA.SPC
[sigmove 05:37:20 DEBUG] transformed Y104Mb.SPC -> Y104MB.SPC
[sigmove 05:37:20 DEBUG] transformed Y104Mc.SPC -> Y104MC.SPC
[sigmove 05:37:20 DEBUG] transformed Y104Md.SPC -> Y104MD.SPC
[sigmove 05:37:20 DEBUG] transformed Y104Me.SPC -> Y104ME.SPC
[sigmove 05:37:20 DEBUG] transformed Y104Mf.SPC -> Y104MF.SPC
[Status 05:37:20 INFO] data for Y104 transferred to science data processing
[Tidy 05:37:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:37:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:37:20 INFO] resetting WatchDogTimer
[Status 05:37:21 INFO] Starting Set [AERI set: name Z104, 6 scans, 0 angle, D16300 command]
[Ingest 05:37:21 INFO] Sending XML status message
[Status 05:37:21 INFO] Mirror angle: 0
[Mirror 05:37:21 INFO] rotating to position Z
[Status 05:37:21 INFO] .SET file for ACQ96 ready
[Ingest 05:37:21 INFO] Starting acquisition
[Status 05:37:21 INFO] reading housekeeping
[Status 05:37:39 INFO] acquire complete
[Status 05:37:39 INFO] writing housekeeping
[Sequencer 05:37:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:37:39 INFO] incremented Z scene to 104 completed views
[Sequencer 05:37:39 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:37:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:37:39 INFO] incremented to [AERI set: name H105, 6 scans, 60 angle, D22500 command] set
[sigmove 05:37:39 INFO] Z104.SIG(18)
[sigmove 05:37:40 DEBUG] transformed Z104Ma.SPC -> Z104MA.SPC
[sigmove 05:37:40 DEBUG] transformed Z104Mb.SPC -> Z104MB.SPC
[sigmove 05:37:40 DEBUG] transformed Z104Mc.SPC -> Z104MC.SPC
[sigmove 05:37:40 DEBUG] transformed Z104Md.SPC -> Z104MD.SPC
[sigmove 05:37:40 DEBUG] transformed Z104Me.SPC -> Z104ME.SPC
[sigmove 05:37:40 DEBUG] transformed Z104Mf.SPC -> Z104MF.SPC
[Status 05:37:40 INFO] data for Z104 transferred to science data processing
[Tidy 05:37:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:37:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:37:40 INFO] resetting WatchDogTimer
[Status 05:37:40 INFO] Starting Set [AERI set: name H105, 6 scans, 60 angle, D22500 command]
[Ingest 05:37:40 INFO] Sending XML status message
[Status 05:37:40 INFO] Mirror angle: 60
[Mirror 05:37:40 INFO] rotating to position H
[Status 05:37:41 INFO] .SET file for ACQ96 ready
[Ingest 05:37:41 INFO] Starting acquisition
[Status 05:37:41 INFO] reading housekeeping
[Status 05:37:59 INFO] acquire complete
[Status 05:38:00 INFO] writing housekeeping
[Sequencer 05:38:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:38:00 INFO] incremented H scene to 105 completed views
[Sequencer 05:38:00 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:38:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:38:00 INFO] incremented to [AERI set: name A105, 6 scans, 120 angle, D28300 command] set
[sigmove 05:38:00 INFO] H105.SIG(18)
[sigmove 05:38:00 DEBUG] transformed H105Ma.SPC -> H105MA.SPC
[sigmove 05:38:00 DEBUG] transformed H105Mb.SPC -> H105MB.SPC
[sigmove 05:38:00 DEBUG] transformed H105Mc.SPC -> H105MC.SPC
[sigmove 05:38:00 DEBUG] transformed H105Md.SPC -> H105MD.SPC
[sigmove 05:38:00 DEBUG] transformed H105Me.SPC -> H105ME.SPC
[sigmove 05:38:00 DEBUG] transformed H105Mf.SPC -> H105MF.SPC
[Status 05:38:00 INFO] data for H105 transferred to science data processing
[Tidy 05:38:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:38:00 INFO] A103.FIN(19),H103.FIN(19),S103.FIN(19),T103.FIN(19),U103.FIN(19),V103.FIN(19),W103.FIN(19),X103.FIN(19),Y103.FIN(19),Z103.FIN(19),A104.FIN(19),H104.FIN(19),S104.FIN(19),T104.FIN(19),U104.FIN(19),V104.FIN(19),W104.FIN(19),X104.FIN(19),Y104.FIN(19),Z104.FIN(19)
[sigmove 05:38:00 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:38:00 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:38:02 DEBUG] done zipping
[WatchDog 05:38:02 INFO] resetting WatchDogTimer
[Status 05:38:02 INFO] Starting Set [AERI set: name A105, 6 scans, 120 angle, D28300 command]
[Ingest 05:38:02 INFO] Sending XML status message
[Status 05:38:02 INFO] Mirror angle: 120
[Mirror 05:38:02 INFO] rotating to position A
[Status 05:38:03 INFO] .SET file for ACQ96 ready
[Ingest 05:38:03 INFO] Starting acquisition
[Status 05:38:03 INFO] reading housekeeping
[Status 05:38:22 INFO] acquire complete
[Status 05:38:22 INFO] writing housekeeping
[Sequencer 05:38:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:38:22 INFO] incremented A scene to 105 completed views
[Sequencer 05:38:22 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:38:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:38:22 INFO] incremented to [AERI set: name S105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:38:22 INFO] A105.SIG(18)
[sigmove 05:38:22 DEBUG] transformed A105Ma.SPC -> A105MA.SPC
[sigmove 05:38:22 DEBUG] transformed A105Mb.SPC -> A105MB.SPC
[sigmove 05:38:22 DEBUG] transformed A105Mc.SPC -> A105MC.SPC
[sigmove 05:38:22 DEBUG] transformed A105Md.SPC -> A105MD.SPC
[sigmove 05:38:22 DEBUG] transformed A105Me.SPC -> A105ME.SPC
[sigmove 05:38:22 DEBUG] transformed A105Mf.SPC -> A105MF.SPC
[Status 05:38:22 INFO] data for A105 transferred to science data processing
[Tidy 05:38:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:38:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:38:22 INFO] resetting WatchDogTimer
[Status 05:38:22 INFO] Starting Set [AERI set: name S105, 6 scans, 0 angle, D16300 command]
[Ingest 05:38:22 INFO] Sending XML status message
[Status 05:38:22 INFO] Mirror angle: 0
[Mirror 05:38:22 INFO] rotating to position S
[Status 05:38:24 INFO] .SET file for ACQ96 ready
[Ingest 05:38:24 INFO] Starting acquisition
[Status 05:38:24 INFO] reading housekeeping
[Status 05:38:42 INFO] acquire complete
[Status 05:38:43 INFO] writing housekeeping
[Sequencer 05:38:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:38:43 INFO] incremented S scene to 105 completed views
[Sequencer 05:38:43 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:38:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:38:43 INFO] incremented to [AERI set: name T105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:38:43 INFO] S105.SIG(18)
[sigmove 05:38:43 DEBUG] transformed S105Ma.SPC -> S105MA.SPC
[sigmove 05:38:43 DEBUG] transformed S105Mb.SPC -> S105MB.SPC
[sigmove 05:38:43 DEBUG] transformed S105Mc.SPC -> S105MC.SPC
[sigmove 05:38:43 DEBUG] transformed S105Md.SPC -> S105MD.SPC
[sigmove 05:38:43 DEBUG] transformed S105Me.SPC -> S105ME.SPC
[sigmove 05:38:43 DEBUG] transformed S105Mf.SPC -> S105MF.SPC
[Status 05:38:43 INFO] data for S105 transferred to science data processing
[Tidy 05:38:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:38:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:38:43 INFO] resetting WatchDogTimer
[Status 05:38:43 INFO] Starting Set [AERI set: name T105, 6 scans, 0 angle, D16300 command]
[Ingest 05:38:43 INFO] Sending XML status message
[Status 05:38:43 INFO] Mirror angle: 0
[Mirror 05:38:43 INFO] rotating to position T
[Status 05:38:43 INFO] .SET file for ACQ96 ready
[Ingest 05:38:43 INFO] Starting acquisition
[Status 05:38:43 INFO] reading housekeeping
[Status 05:39:01 INFO] acquire complete
[Status 05:39:01 INFO] writing housekeeping
[Sequencer 05:39:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:39:01 INFO] incremented T scene to 105 completed views
[Sequencer 05:39:01 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:39:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:39:01 INFO] incremented to [AERI set: name U105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:39:01 INFO] T105.SIG(18)
[sigmove 05:39:01 DEBUG] transformed T105Ma.SPC -> T105MA.SPC
[sigmove 05:39:01 DEBUG] transformed T105Mb.SPC -> T105MB.SPC
[sigmove 05:39:01 DEBUG] transformed T105Mc.SPC -> T105MC.SPC
[sigmove 05:39:01 DEBUG] transformed T105Md.SPC -> T105MD.SPC
[sigmove 05:39:01 DEBUG] transformed T105Me.SPC -> T105ME.SPC
[sigmove 05:39:01 DEBUG] transformed T105Mf.SPC -> T105MF.SPC
[Status 05:39:01 INFO] data for T105 transferred to science data processing
[Tidy 05:39:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:39:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:39:01 INFO] resetting WatchDogTimer
[Status 05:39:02 INFO] Starting Set [AERI set: name U105, 6 scans, 0 angle, D16300 command]
[Ingest 05:39:02 INFO] Sending XML status message
[Status 05:39:02 INFO] Mirror angle: 0
[Mirror 05:39:02 INFO] rotating to position U
[Status 05:39:02 INFO] .SET file for ACQ96 ready
[Ingest 05:39:02 INFO] Starting acquisition
[Status 05:39:03 INFO] reading housekeeping
[Status 05:39:20 INFO] acquire complete
[Status 05:39:21 INFO] writing housekeeping
[Sequencer 05:39:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:39:21 INFO] incremented U scene to 105 completed views
[Sequencer 05:39:21 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:39:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:39:21 INFO] incremented to [AERI set: name V105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:39:21 INFO] U105.SIG(18)
[sigmove 05:39:21 DEBUG] transformed U105Ma.SPC -> U105MA.SPC
[sigmove 05:39:21 DEBUG] transformed U105Mb.SPC -> U105MB.SPC
[sigmove 05:39:21 DEBUG] transformed U105Mc.SPC -> U105MC.SPC
[sigmove 05:39:21 DEBUG] transformed U105Md.SPC -> U105MD.SPC
[sigmove 05:39:21 DEBUG] transformed U105Me.SPC -> U105ME.SPC
[sigmove 05:39:21 DEBUG] transformed U105Mf.SPC -> U105MF.SPC
[Status 05:39:21 INFO] data for U105 transferred to science data processing
[Tidy 05:39:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:39:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:39:21 INFO] resetting WatchDogTimer
[Status 05:39:21 INFO] Starting Set [AERI set: name V105, 6 scans, 0 angle, D16300 command]
[Ingest 05:39:21 INFO] Sending XML status message
[Status 05:39:21 INFO] Mirror angle: 0
[Mirror 05:39:21 INFO] rotating to position V
[Status 05:39:21 INFO] .SET file for ACQ96 ready
[Ingest 05:39:22 INFO] Starting acquisition
[Status 05:39:22 INFO] reading housekeeping
[Status 05:39:39 INFO] acquire complete
[Status 05:39:40 INFO] writing housekeeping
[Sequencer 05:39:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:39:40 INFO] incremented V scene to 105 completed views
[Sequencer 05:39:40 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:39:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:39:40 INFO] incremented to [AERI set: name W105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:39:40 INFO] V105.SIG(18)
[sigmove 05:39:40 DEBUG] transformed V105Ma.SPC -> V105MA.SPC
[sigmove 05:39:40 DEBUG] transformed V105Mb.SPC -> V105MB.SPC
[sigmove 05:39:40 DEBUG] transformed V105Mc.SPC -> V105MC.SPC
[sigmove 05:39:40 DEBUG] transformed V105Md.SPC -> V105MD.SPC
[sigmove 05:39:40 DEBUG] transformed V105Me.SPC -> V105ME.SPC
[sigmove 05:39:40 DEBUG] transformed V105Mf.SPC -> V105MF.SPC
[Status 05:39:40 INFO] data for V105 transferred to science data processing
[Tidy 05:39:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:39:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:39:40 INFO] resetting WatchDogTimer
[Status 05:39:40 INFO] Starting Set [AERI set: name W105, 6 scans, 0 angle, D16300 command]
[Ingest 05:39:40 INFO] Sending XML status message
[Status 05:39:40 INFO] Mirror angle: 0
[Mirror 05:39:40 INFO] rotating to position W
[Status 05:39:40 INFO] .SET file for ACQ96 ready
[Ingest 05:39:40 INFO] Starting acquisition
[Status 05:39:40 INFO] reading housekeeping
[Status 05:39:58 INFO] acquire complete
[Status 05:39:59 INFO] writing housekeeping
[Sequencer 05:39:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:39:59 INFO] incremented W scene to 105 completed views
[Sequencer 05:39:59 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:39:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:39:59 INFO] incremented to [AERI set: name X105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:39:59 INFO] W105.SIG(18)
[sigmove 05:39:59 DEBUG] transformed W105Ma.SPC -> W105MA.SPC
[sigmove 05:39:59 DEBUG] transformed W105Mb.SPC -> W105MB.SPC
[sigmove 05:39:59 DEBUG] transformed W105Mc.SPC -> W105MC.SPC
[sigmove 05:39:59 DEBUG] transformed W105Md.SPC -> W105MD.SPC
[sigmove 05:39:59 DEBUG] transformed W105Me.SPC -> W105ME.SPC
[sigmove 05:39:59 DEBUG] transformed W105Mf.SPC -> W105MF.SPC
[Status 05:39:59 INFO] data for W105 transferred to science data processing
[Tidy 05:39:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:39:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:39:59 INFO] resetting WatchDogTimer
[Status 05:39:59 INFO] Starting Set [AERI set: name X105, 6 scans, 0 angle, D16300 command]
[Ingest 05:39:59 INFO] Sending XML status message
[Status 05:39:59 INFO] Mirror angle: 0
[Mirror 05:39:59 INFO] rotating to position X
[Status 05:39:59 INFO] .SET file for ACQ96 ready
[Ingest 05:39:59 INFO] Starting acquisition
[Status 05:40:00 INFO] reading housekeeping
[Status 05:40:17 INFO] acquire complete
[Status 05:40:18 INFO] writing housekeeping
[Sequencer 05:40:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:40:18 INFO] incremented X scene to 105 completed views
[Sequencer 05:40:18 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:40:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:40:18 INFO] incremented to [AERI set: name Y105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:40:18 INFO] X105.SIG(18)
[sigmove 05:40:18 DEBUG] transformed X105Ma.SPC -> X105MA.SPC
[sigmove 05:40:18 DEBUG] transformed X105Mb.SPC -> X105MB.SPC
[sigmove 05:40:18 DEBUG] transformed X105Mc.SPC -> X105MC.SPC
[sigmove 05:40:18 DEBUG] transformed X105Md.SPC -> X105MD.SPC
[sigmove 05:40:18 DEBUG] transformed X105Me.SPC -> X105ME.SPC
[sigmove 05:40:18 DEBUG] transformed X105Mf.SPC -> X105MF.SPC
[Status 05:40:18 INFO] data for X105 transferred to science data processing
[Tidy 05:40:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:40:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:40:18 INFO] resetting WatchDogTimer
[Status 05:40:18 INFO] Starting Set [AERI set: name Y105, 6 scans, 0 angle, D16300 command]
[Ingest 05:40:18 INFO] Sending XML status message
[Status 05:40:18 INFO] Mirror angle: 0
[Mirror 05:40:18 INFO] rotating to position Y
[Status 05:40:18 INFO] .SET file for ACQ96 ready
[Ingest 05:40:19 INFO] Starting acquisition
[Status 05:40:19 INFO] reading housekeeping
[Status 05:40:36 INFO] acquire complete
[Status 05:40:37 INFO] writing housekeeping
[Sequencer 05:40:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:40:37 INFO] incremented Y scene to 105 completed views
[Sequencer 05:40:37 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:40:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:40:37 INFO] incremented to [AERI set: name Z105, 6 scans, 0 angle, D16300 command] set
[sigmove 05:40:37 INFO] Y105.SIG(18)
[sigmove 05:40:37 DEBUG] transformed Y105Ma.SPC -> Y105MA.SPC
[sigmove 05:40:37 DEBUG] transformed Y105Mb.SPC -> Y105MB.SPC
[sigmove 05:40:37 DEBUG] transformed Y105Mc.SPC -> Y105MC.SPC
[sigmove 05:40:37 DEBUG] transformed Y105Md.SPC -> Y105MD.SPC
[sigmove 05:40:37 DEBUG] transformed Y105Me.SPC -> Y105ME.SPC
[sigmove 05:40:37 DEBUG] transformed Y105Mf.SPC -> Y105MF.SPC
[Status 05:40:37 INFO] data for Y105 transferred to science data processing
[Tidy 05:40:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:40:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:40:37 INFO] resetting WatchDogTimer
[Status 05:40:37 INFO] Starting Set [AERI set: name Z105, 6 scans, 0 angle, D16300 command]
[Ingest 05:40:37 INFO] Sending XML status message
[Status 05:40:37 INFO] Mirror angle: 0
[Mirror 05:40:37 INFO] rotating to position Z
[Status 05:40:37 INFO] .SET file for ACQ96 ready
[Ingest 05:40:38 INFO] Starting acquisition
[Status 05:40:38 INFO] reading housekeeping
[Status 05:40:55 INFO] acquire complete
[Status 05:40:56 INFO] writing housekeeping
[Sequencer 05:40:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:40:56 INFO] incremented Z scene to 105 completed views
[Sequencer 05:40:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:40:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:40:56 INFO] incremented to [AERI set: name A106, 6 scans, 120 angle, D28300 command] set
[sigmove 05:40:56 INFO] Z105.SIG(18)
[sigmove 05:40:56 DEBUG] transformed Z105Ma.SPC -> Z105MA.SPC
[sigmove 05:40:56 DEBUG] transformed Z105Mb.SPC -> Z105MB.SPC
[sigmove 05:40:56 DEBUG] transformed Z105Mc.SPC -> Z105MC.SPC
[sigmove 05:40:56 DEBUG] transformed Z105Md.SPC -> Z105MD.SPC
[sigmove 05:40:56 DEBUG] transformed Z105Me.SPC -> Z105ME.SPC
[sigmove 05:40:56 DEBUG] transformed Z105Mf.SPC -> Z105MF.SPC
[Status 05:40:56 INFO] data for Z105 transferred to science data processing
[Tidy 05:40:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:40:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:40:56 INFO] resetting WatchDogTimer
[Status 05:40:56 INFO] Starting Set [AERI set: name A106, 6 scans, 120 angle, D28300 command]
[Ingest 05:40:56 INFO] Sending XML status message
[Status 05:40:56 INFO] Mirror angle: 120
[Mirror 05:40:56 INFO] rotating to position A
[Status 05:40:58 INFO] .SET file for ACQ96 ready
[Ingest 05:40:58 INFO] Starting acquisition
[Status 05:40:58 INFO] reading housekeeping
[Status 05:41:16 INFO] acquire complete
[Status 05:41:16 INFO] writing housekeeping
[Sequencer 05:41:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:41:16 INFO] incremented A scene to 106 completed views
[Sequencer 05:41:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:41:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:41:16 INFO] incremented to [AERI set: name H106, 6 scans, 60 angle, D22500 command] set
[sigmove 05:41:16 INFO] A106.SIG(18)
[sigmove 05:41:16 DEBUG] transformed A106Ma.SPC -> A106MA.SPC
[sigmove 05:41:16 DEBUG] transformed A106Mb.SPC -> A106MB.SPC
[sigmove 05:41:16 DEBUG] transformed A106Mc.SPC -> A106MC.SPC
[sigmove 05:41:16 DEBUG] transformed A106Md.SPC -> A106MD.SPC
[sigmove 05:41:16 DEBUG] transformed A106Me.SPC -> A106ME.SPC
[sigmove 05:41:16 DEBUG] transformed A106Mf.SPC -> A106MF.SPC
[Status 05:41:16 INFO] data for A106 transferred to science data processing
[Tidy 05:41:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:41:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:41:16 INFO] resetting WatchDogTimer
[Status 05:41:16 INFO] Starting Set [AERI set: name H106, 6 scans, 60 angle, D22500 command]
[Ingest 05:41:16 INFO] Sending XML status message
[Status 05:41:16 INFO] Mirror angle: 60
[Mirror 05:41:17 INFO] rotating to position H
[Status 05:41:17 INFO] .SET file for ACQ96 ready
[Ingest 05:41:17 INFO] Starting acquisition
[Status 05:41:18 INFO] reading housekeeping
[Status 05:41:36 INFO] acquire complete
[Status 05:41:36 INFO] writing housekeeping
[Sequencer 05:41:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:41:36 INFO] incremented H scene to 106 completed views
[Sequencer 05:41:36 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:41:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:41:36 INFO] incremented to [AERI set: name S106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:41:36 INFO] H106.SIG(18)
[sigmove 05:41:36 DEBUG] transformed H106Ma.SPC -> H106MA.SPC
[sigmove 05:41:36 DEBUG] transformed H106Mb.SPC -> H106MB.SPC
[sigmove 05:41:36 DEBUG] transformed H106Mc.SPC -> H106MC.SPC
[sigmove 05:41:36 DEBUG] transformed H106Md.SPC -> H106MD.SPC
[sigmove 05:41:36 DEBUG] transformed H106Me.SPC -> H106ME.SPC
[sigmove 05:41:36 DEBUG] transformed H106Mf.SPC -> H106MF.SPC
[Status 05:41:36 INFO] data for H106 transferred to science data processing
[Tidy 05:41:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:41:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:41:36 INFO] resetting WatchDogTimer
[Status 05:41:37 INFO] Starting Set [AERI set: name S106, 6 scans, 0 angle, D16300 command]
[Ingest 05:41:37 INFO] Sending XML status message
[Status 05:41:37 INFO] Mirror angle: 0
[Mirror 05:41:37 INFO] rotating to position S
[Status 05:41:37 INFO] .SET file for ACQ96 ready
[Ingest 05:41:38 INFO] Starting acquisition
[Status 05:41:38 INFO] reading housekeeping
[Status 05:41:56 INFO] acquire complete
[Status 05:41:57 INFO] writing housekeeping
[Sequencer 05:41:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:41:57 INFO] incremented S scene to 106 completed views
[Sequencer 05:41:57 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:41:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:41:57 INFO] incremented to [AERI set: name T106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:41:57 INFO] S106.SIG(18)
[sigmove 05:41:57 DEBUG] transformed S106Ma.SPC -> S106MA.SPC
[sigmove 05:41:57 DEBUG] transformed S106Mb.SPC -> S106MB.SPC
[sigmove 05:41:57 DEBUG] transformed S106Mc.SPC -> S106MC.SPC
[sigmove 05:41:57 DEBUG] transformed S106Md.SPC -> S106MD.SPC
[sigmove 05:41:57 DEBUG] transformed S106Me.SPC -> S106ME.SPC
[sigmove 05:41:57 DEBUG] transformed S106Mf.SPC -> S106MF.SPC
[Status 05:41:57 INFO] data for S106 transferred to science data processing
[Tidy 05:41:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:41:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:41:57 INFO] resetting WatchDogTimer
[Status 05:41:57 INFO] Starting Set [AERI set: name T106, 6 scans, 0 angle, D16300 command]
[Ingest 05:41:57 INFO] Sending XML status message
[Status 05:41:57 INFO] Mirror angle: 0
[Mirror 05:41:57 INFO] rotating to position T
[Status 05:41:57 INFO] .SET file for ACQ96 ready
[Ingest 05:41:57 INFO] Starting acquisition
[Status 05:41:57 INFO] reading housekeeping
[Status 05:42:15 INFO] acquire complete
[Status 05:42:16 INFO] writing housekeeping
[Sequencer 05:42:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:42:16 INFO] incremented T scene to 106 completed views
[Sequencer 05:42:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:42:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:42:16 INFO] incremented to [AERI set: name U106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:42:16 INFO] T106.SIG(18)
[sigmove 05:42:16 DEBUG] transformed T106Ma.SPC -> T106MA.SPC
[sigmove 05:42:16 DEBUG] transformed T106Mb.SPC -> T106MB.SPC
[sigmove 05:42:16 DEBUG] transformed T106Mc.SPC -> T106MC.SPC
[sigmove 05:42:16 DEBUG] transformed T106Md.SPC -> T106MD.SPC
[sigmove 05:42:16 DEBUG] transformed T106Me.SPC -> T106ME.SPC
[sigmove 05:42:16 DEBUG] transformed T106Mf.SPC -> T106MF.SPC
[Status 05:42:16 INFO] data for T106 transferred to science data processing
[Tidy 05:42:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:42:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:42:16 INFO] resetting WatchDogTimer
[Status 05:42:16 INFO] Starting Set [AERI set: name U106, 6 scans, 0 angle, D16300 command]
[Ingest 05:42:16 INFO] Sending XML status message
[Status 05:42:16 INFO] Mirror angle: 0
[Mirror 05:42:16 INFO] rotating to position U
[Status 05:42:16 INFO] .SET file for ACQ96 ready
[Ingest 05:42:16 INFO] Starting acquisition
[Status 05:42:17 INFO] reading housekeeping
[Status 05:42:34 INFO] acquire complete
[Status 05:42:35 INFO] writing housekeeping
[Sequencer 05:42:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:42:35 INFO] incremented U scene to 106 completed views
[Sequencer 05:42:35 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:42:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:42:35 INFO] incremented to [AERI set: name V106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:42:35 INFO] U106.SIG(18)
[sigmove 05:42:35 DEBUG] transformed U106Ma.SPC -> U106MA.SPC
[sigmove 05:42:35 DEBUG] transformed U106Mb.SPC -> U106MB.SPC
[sigmove 05:42:35 DEBUG] transformed U106Mc.SPC -> U106MC.SPC
[sigmove 05:42:35 DEBUG] transformed U106Md.SPC -> U106MD.SPC
[sigmove 05:42:35 DEBUG] transformed U106Me.SPC -> U106ME.SPC
[sigmove 05:42:35 DEBUG] transformed U106Mf.SPC -> U106MF.SPC
[Status 05:42:35 INFO] data for U106 transferred to science data processing
[Tidy 05:42:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:42:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:42:35 INFO] resetting WatchDogTimer
[Status 05:42:35 INFO] Starting Set [AERI set: name V106, 6 scans, 0 angle, D16300 command]
[Ingest 05:42:35 INFO] Sending XML status message
[Status 05:42:35 INFO] Mirror angle: 0
[Mirror 05:42:35 INFO] rotating to position V
[Status 05:42:35 INFO] .SET file for ACQ96 ready
[Ingest 05:42:35 INFO] Starting acquisition
[Status 05:42:36 INFO] reading housekeeping
[Status 05:42:53 INFO] acquire complete
[Status 05:42:54 INFO] writing housekeeping
[Sequencer 05:42:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:42:54 INFO] incremented V scene to 106 completed views
[Sequencer 05:42:54 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:42:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:42:54 INFO] incremented to [AERI set: name W106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:42:54 INFO] V106.SIG(18)
[sigmove 05:42:54 DEBUG] transformed V106Ma.SPC -> V106MA.SPC
[sigmove 05:42:54 DEBUG] transformed V106Mb.SPC -> V106MB.SPC
[sigmove 05:42:54 DEBUG] transformed V106Mc.SPC -> V106MC.SPC
[sigmove 05:42:54 DEBUG] transformed V106Md.SPC -> V106MD.SPC
[sigmove 05:42:54 DEBUG] transformed V106Me.SPC -> V106ME.SPC
[sigmove 05:42:54 DEBUG] transformed V106Mf.SPC -> V106MF.SPC
[Status 05:42:54 INFO] data for V106 transferred to science data processing
[Tidy 05:42:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:42:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:42:54 INFO] resetting WatchDogTimer
[Status 05:42:54 INFO] Starting Set [AERI set: name W106, 6 scans, 0 angle, D16300 command]
[Ingest 05:42:54 INFO] Sending XML status message
[Status 05:42:54 INFO] Mirror angle: 0
[Mirror 05:42:54 INFO] rotating to position W
[Status 05:42:54 INFO] .SET file for ACQ96 ready
[Ingest 05:42:55 INFO] Starting acquisition
[Status 05:42:55 INFO] reading housekeeping
[Status 05:43:12 INFO] acquire complete
[Status 05:43:13 INFO] writing housekeeping
[Sequencer 05:43:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:43:13 INFO] incremented W scene to 106 completed views
[Sequencer 05:43:13 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:43:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:43:13 INFO] incremented to [AERI set: name X106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:43:13 INFO] W106.SIG(18)
[sigmove 05:43:13 DEBUG] transformed W106Ma.SPC -> W106MA.SPC
[sigmove 05:43:13 DEBUG] transformed W106Mb.SPC -> W106MB.SPC
[sigmove 05:43:13 DEBUG] transformed W106Mc.SPC -> W106MC.SPC
[sigmove 05:43:13 DEBUG] transformed W106Md.SPC -> W106MD.SPC
[sigmove 05:43:13 DEBUG] transformed W106Me.SPC -> W106ME.SPC
[sigmove 05:43:13 DEBUG] transformed W106Mf.SPC -> W106MF.SPC
[Status 05:43:13 INFO] data for W106 transferred to science data processing
[Tidy 05:43:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:43:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:43:13 INFO] resetting WatchDogTimer
[Status 05:43:13 INFO] Starting Set [AERI set: name X106, 6 scans, 0 angle, D16300 command]
[Ingest 05:43:13 INFO] Sending XML status message
[Status 05:43:13 INFO] Mirror angle: 0
[Mirror 05:43:13 INFO] rotating to position X
[Status 05:43:14 INFO] .SET file for ACQ96 ready
[Ingest 05:43:14 INFO] Starting acquisition
[Status 05:43:14 INFO] reading housekeeping
[Status 05:43:31 INFO] acquire complete
[Status 05:43:32 INFO] writing housekeeping
[Sequencer 05:43:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:43:32 INFO] incremented X scene to 106 completed views
[Sequencer 05:43:32 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:43:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:43:32 INFO] incremented to [AERI set: name Y106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:43:32 INFO] X106.SIG(18)
[sigmove 05:43:32 DEBUG] transformed X106Ma.SPC -> X106MA.SPC
[sigmove 05:43:32 DEBUG] transformed X106Mb.SPC -> X106MB.SPC
[sigmove 05:43:32 DEBUG] transformed X106Mc.SPC -> X106MC.SPC
[sigmove 05:43:32 DEBUG] transformed X106Md.SPC -> X106MD.SPC
[sigmove 05:43:32 DEBUG] transformed X106Me.SPC -> X106ME.SPC
[sigmove 05:43:32 DEBUG] transformed X106Mf.SPC -> X106MF.SPC
[Status 05:43:32 INFO] data for X106 transferred to science data processing
[Tidy 05:43:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:43:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:43:32 INFO] resetting WatchDogTimer
[Status 05:43:32 INFO] Starting Set [AERI set: name Y106, 6 scans, 0 angle, D16300 command]
[Ingest 05:43:32 INFO] Sending XML status message
[Status 05:43:32 INFO] Mirror angle: 0
[Mirror 05:43:32 INFO] rotating to position Y
[Status 05:43:33 INFO] .SET file for ACQ96 ready
[Ingest 05:43:33 INFO] Starting acquisition
[Status 05:43:33 INFO] reading housekeeping
[Status 05:43:51 INFO] acquire complete
[Status 05:43:51 INFO] writing housekeeping
[Sequencer 05:43:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:43:51 INFO] incremented Y scene to 106 completed views
[Sequencer 05:43:51 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:43:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:43:51 INFO] incremented to [AERI set: name Z106, 6 scans, 0 angle, D16300 command] set
[sigmove 05:43:51 INFO] Y106.SIG(18)
[sigmove 05:43:51 DEBUG] transformed Y106Ma.SPC -> Y106MA.SPC
[sigmove 05:43:51 DEBUG] transformed Y106Mb.SPC -> Y106MB.SPC
[sigmove 05:43:51 DEBUG] transformed Y106Mc.SPC -> Y106MC.SPC
[sigmove 05:43:51 DEBUG] transformed Y106Md.SPC -> Y106MD.SPC
[sigmove 05:43:51 DEBUG] transformed Y106Me.SPC -> Y106ME.SPC
[sigmove 05:43:51 DEBUG] transformed Y106Mf.SPC -> Y106MF.SPC
[Status 05:43:51 INFO] data for Y106 transferred to science data processing
[Tidy 05:43:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:43:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:43:51 INFO] resetting WatchDogTimer
[Status 05:43:51 INFO] Starting Set [AERI set: name Z106, 6 scans, 0 angle, D16300 command]
[Ingest 05:43:51 INFO] Sending XML status message
[Status 05:43:51 INFO] Mirror angle: 0
[Mirror 05:43:51 INFO] rotating to position Z
[Status 05:43:52 INFO] .SET file for ACQ96 ready
[Ingest 05:43:52 INFO] Starting acquisition
[Status 05:43:52 INFO] reading housekeeping
[Status 05:44:10 INFO] acquire complete
[Status 05:44:10 INFO] writing housekeeping
[Sequencer 05:44:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:44:10 INFO] incremented Z scene to 106 completed views
[Sequencer 05:44:10 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:44:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:44:10 INFO] incremented to [AERI set: name H107, 6 scans, 60 angle, D22500 command] set
[sigmove 05:44:10 INFO] Z106.SIG(18)
[sigmove 05:44:10 DEBUG] transformed Z106Ma.SPC -> Z106MA.SPC
[sigmove 05:44:10 DEBUG] transformed Z106Mb.SPC -> Z106MB.SPC
[sigmove 05:44:10 DEBUG] transformed Z106Mc.SPC -> Z106MC.SPC
[sigmove 05:44:10 DEBUG] transformed Z106Md.SPC -> Z106MD.SPC
[sigmove 05:44:10 DEBUG] transformed Z106Me.SPC -> Z106ME.SPC
[sigmove 05:44:10 DEBUG] transformed Z106Mf.SPC -> Z106MF.SPC
[Status 05:44:10 INFO] data for Z106 transferred to science data processing
[Tidy 05:44:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:44:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:44:10 INFO] resetting WatchDogTimer
[Status 05:44:10 INFO] Starting Set [AERI set: name H107, 6 scans, 60 angle, D22500 command]
[Ingest 05:44:10 INFO] Sending XML status message
[Status 05:44:10 INFO] Mirror angle: 60
[Mirror 05:44:10 INFO] rotating to position H
[Status 05:44:11 INFO] .SET file for ACQ96 ready
[Ingest 05:44:11 INFO] Starting acquisition
[Status 05:44:12 INFO] reading housekeeping
[Status 05:44:30 INFO] acquire complete
[Status 05:44:30 INFO] writing housekeeping
[Sequencer 05:44:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:44:30 INFO] incremented H scene to 107 completed views
[Sequencer 05:44:30 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:44:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:44:30 INFO] incremented to [AERI set: name A107, 6 scans, 120 angle, D28300 command] set
[sigmove 05:44:30 INFO] H107.SIG(18)
[sigmove 05:44:30 DEBUG] transformed H107Ma.SPC -> H107MA.SPC
[sigmove 05:44:30 DEBUG] transformed H107Mb.SPC -> H107MB.SPC
[sigmove 05:44:30 DEBUG] transformed H107Mc.SPC -> H107MC.SPC
[sigmove 05:44:30 DEBUG] transformed H107Md.SPC -> H107MD.SPC
[sigmove 05:44:30 DEBUG] transformed H107Me.SPC -> H107ME.SPC
[sigmove 05:44:30 DEBUG] transformed H107Mf.SPC -> H107MF.SPC
[Status 05:44:30 INFO] data for H107 transferred to science data processing
[Tidy 05:44:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:44:30 INFO] A105.FIN(19),H105.FIN(19),S105.FIN(19),T105.FIN(19),U105.FIN(19),V105.FIN(19),W105.FIN(19),X105.FIN(19),Y105.FIN(19),Z105.FIN(19),A106.FIN(19),H106.FIN(19),S106.FIN(19),T106.FIN(19),U106.FIN(19),V106.FIN(19),W106.FIN(19),X106.FIN(19),Y106.FIN(19),Z106.FIN(19)
[sigmove 05:44:30 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:44:30 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:44:32 DEBUG] done zipping
[WatchDog 05:44:33 INFO] resetting WatchDogTimer
[Status 05:44:33 INFO] Starting Set [AERI set: name A107, 6 scans, 120 angle, D28300 command]
[Ingest 05:44:33 INFO] Sending XML status message
[Status 05:44:33 INFO] Mirror angle: 120
[Mirror 05:44:33 INFO] rotating to position A
[Status 05:44:34 INFO] .SET file for ACQ96 ready
[Ingest 05:44:34 INFO] Starting acquisition
[Status 05:44:34 INFO] reading housekeeping
[Status 05:44:52 INFO] acquire complete
[Status 05:44:53 INFO] writing housekeeping
[Sequencer 05:44:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:44:53 INFO] incremented A scene to 107 completed views
[Sequencer 05:44:53 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:44:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:44:53 INFO] incremented to [AERI set: name S107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:44:53 INFO] A107.SIG(18)
[sigmove 05:44:53 DEBUG] transformed A107Ma.SPC -> A107MA.SPC
[sigmove 05:44:53 DEBUG] transformed A107Mb.SPC -> A107MB.SPC
[sigmove 05:44:53 DEBUG] transformed A107Mc.SPC -> A107MC.SPC
[sigmove 05:44:53 DEBUG] transformed A107Md.SPC -> A107MD.SPC
[sigmove 05:44:53 DEBUG] transformed A107Me.SPC -> A107ME.SPC
[sigmove 05:44:53 DEBUG] transformed A107Mf.SPC -> A107MF.SPC
[Status 05:44:53 INFO] data for A107 transferred to science data processing
[Tidy 05:44:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:44:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:44:53 INFO] resetting WatchDogTimer
[Status 05:44:53 INFO] Starting Set [AERI set: name S107, 6 scans, 0 angle, D16300 command]
[Ingest 05:44:53 INFO] Sending XML status message
[Status 05:44:53 INFO] Mirror angle: 0
[Mirror 05:44:53 INFO] rotating to position S
[Status 05:44:54 INFO] .SET file for ACQ96 ready
[Ingest 05:44:55 INFO] Starting acquisition
[Status 05:44:55 INFO] reading housekeeping
[Status 05:45:13 INFO] acquire complete
[Status 05:45:13 INFO] writing housekeeping
[Sequencer 05:45:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:45:13 INFO] incremented S scene to 107 completed views
[Sequencer 05:45:13 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:45:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:45:13 INFO] incremented to [AERI set: name T107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:45:13 INFO] S107.SIG(18)
[sigmove 05:45:13 DEBUG] transformed S107Ma.SPC -> S107MA.SPC
[sigmove 05:45:13 DEBUG] transformed S107Mb.SPC -> S107MB.SPC
[sigmove 05:45:13 DEBUG] transformed S107Mc.SPC -> S107MC.SPC
[sigmove 05:45:13 DEBUG] transformed S107Md.SPC -> S107MD.SPC
[sigmove 05:45:13 DEBUG] transformed S107Me.SPC -> S107ME.SPC
[sigmove 05:45:13 DEBUG] transformed S107Mf.SPC -> S107MF.SPC
[Status 05:45:13 INFO] data for S107 transferred to science data processing
[Tidy 05:45:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:45:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:45:13 INFO] resetting WatchDogTimer
[Status 05:45:13 INFO] Starting Set [AERI set: name T107, 6 scans, 0 angle, D16300 command]
[Ingest 05:45:13 INFO] Sending XML status message
[Status 05:45:13 INFO] Mirror angle: 0
[Mirror 05:45:13 INFO] rotating to position T
[Status 05:45:14 INFO] .SET file for ACQ96 ready
[Ingest 05:45:14 INFO] Starting acquisition
[Status 05:45:14 INFO] reading housekeeping
[Status 05:45:32 INFO] acquire complete
[Status 05:45:32 INFO] writing housekeeping
[Sequencer 05:45:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:45:32 INFO] incremented T scene to 107 completed views
[Sequencer 05:45:32 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:45:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:45:32 INFO] incremented to [AERI set: name U107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:45:32 INFO] T107.SIG(18)
[sigmove 05:45:32 DEBUG] transformed T107Ma.SPC -> T107MA.SPC
[sigmove 05:45:32 DEBUG] transformed T107Mb.SPC -> T107MB.SPC
[sigmove 05:45:32 DEBUG] transformed T107Mc.SPC -> T107MC.SPC
[sigmove 05:45:32 DEBUG] transformed T107Md.SPC -> T107MD.SPC
[sigmove 05:45:32 DEBUG] transformed T107Me.SPC -> T107ME.SPC
[sigmove 05:45:32 DEBUG] transformed T107Mf.SPC -> T107MF.SPC
[Status 05:45:32 INFO] data for T107 transferred to science data processing
[Tidy 05:45:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:45:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:45:32 INFO] resetting WatchDogTimer
[Status 05:45:32 INFO] Starting Set [AERI set: name U107, 6 scans, 0 angle, D16300 command]
[Ingest 05:45:32 INFO] Sending XML status message
[Status 05:45:32 INFO] Mirror angle: 0
[Mirror 05:45:32 INFO] rotating to position U
[Status 05:45:33 INFO] .SET file for ACQ96 ready
[Ingest 05:45:33 INFO] Starting acquisition
[Status 05:45:33 INFO] reading housekeeping
[Status 05:45:51 INFO] acquire complete
[Status 05:45:51 INFO] writing housekeeping
[Sequencer 05:45:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:45:51 INFO] incremented U scene to 107 completed views
[Sequencer 05:45:51 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:45:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:45:51 INFO] incremented to [AERI set: name V107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:45:51 INFO] U107.SIG(18)
[sigmove 05:45:51 DEBUG] transformed U107Ma.SPC -> U107MA.SPC
[sigmove 05:45:51 DEBUG] transformed U107Mb.SPC -> U107MB.SPC
[sigmove 05:45:51 DEBUG] transformed U107Mc.SPC -> U107MC.SPC
[sigmove 05:45:51 DEBUG] transformed U107Md.SPC -> U107MD.SPC
[sigmove 05:45:51 DEBUG] transformed U107Me.SPC -> U107ME.SPC
[sigmove 05:45:51 DEBUG] transformed U107Mf.SPC -> U107MF.SPC
[Status 05:45:51 INFO] data for U107 transferred to science data processing
[Tidy 05:45:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:45:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:45:51 INFO] resetting WatchDogTimer
[Status 05:45:51 INFO] Starting Set [AERI set: name V107, 6 scans, 0 angle, D16300 command]
[Ingest 05:45:51 INFO] Sending XML status message
[Status 05:45:51 INFO] Mirror angle: 0
[Mirror 05:45:52 INFO] rotating to position V
[Status 05:45:52 INFO] .SET file for ACQ96 ready
[Ingest 05:45:52 INFO] Starting acquisition
[Status 05:45:52 INFO] reading housekeeping
[Status 05:46:10 INFO] acquire complete
[Status 05:46:10 INFO] writing housekeeping
[Sequencer 05:46:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:46:10 INFO] incremented V scene to 107 completed views
[Sequencer 05:46:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:46:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:46:10 INFO] incremented to [AERI set: name W107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:46:10 INFO] V107.SIG(18)
[sigmove 05:46:10 DEBUG] transformed V107Ma.SPC -> V107MA.SPC
[sigmove 05:46:10 DEBUG] transformed V107Mb.SPC -> V107MB.SPC
[sigmove 05:46:10 DEBUG] transformed V107Mc.SPC -> V107MC.SPC
[sigmove 05:46:10 DEBUG] transformed V107Md.SPC -> V107MD.SPC
[sigmove 05:46:10 DEBUG] transformed V107Me.SPC -> V107ME.SPC
[sigmove 05:46:10 DEBUG] transformed V107Mf.SPC -> V107MF.SPC
[Status 05:46:10 INFO] data for V107 transferred to science data processing
[Tidy 05:46:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:46:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:46:10 INFO] resetting WatchDogTimer
[Status 05:46:11 INFO] Starting Set [AERI set: name W107, 6 scans, 0 angle, D16300 command]
[Ingest 05:46:11 INFO] Sending XML status message
[Status 05:46:11 INFO] Mirror angle: 0
[Mirror 05:46:11 INFO] rotating to position W
[Status 05:46:11 INFO] .SET file for ACQ96 ready
[Ingest 05:46:11 INFO] Starting acquisition
[Status 05:46:11 INFO] reading housekeeping
[Status 05:46:29 INFO] acquire complete
[Status 05:46:29 INFO] writing housekeeping
[Sequencer 05:46:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:46:29 INFO] incremented W scene to 107 completed views
[Sequencer 05:46:29 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:46:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:46:29 INFO] incremented to [AERI set: name X107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:46:29 INFO] W107.SIG(18)
[sigmove 05:46:29 DEBUG] transformed W107Ma.SPC -> W107MA.SPC
[sigmove 05:46:29 DEBUG] transformed W107Mb.SPC -> W107MB.SPC
[sigmove 05:46:29 DEBUG] transformed W107Mc.SPC -> W107MC.SPC
[sigmove 05:46:29 DEBUG] transformed W107Md.SPC -> W107MD.SPC
[sigmove 05:46:29 DEBUG] transformed W107Me.SPC -> W107ME.SPC
[sigmove 05:46:29 DEBUG] transformed W107Mf.SPC -> W107MF.SPC
[Status 05:46:29 INFO] data for W107 transferred to science data processing
[Tidy 05:46:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:46:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:46:29 INFO] resetting WatchDogTimer
[Status 05:46:30 INFO] Starting Set [AERI set: name X107, 6 scans, 0 angle, D16300 command]
[Ingest 05:46:30 INFO] Sending XML status message
[Status 05:46:30 INFO] Mirror angle: 0
[Mirror 05:46:30 INFO] rotating to position X
[Status 05:46:30 INFO] .SET file for ACQ96 ready
[Ingest 05:46:30 INFO] Starting acquisition
[Status 05:46:30 INFO] reading housekeeping
[Status 05:46:48 INFO] acquire complete
[Status 05:46:48 INFO] writing housekeeping
[Sequencer 05:46:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:46:48 INFO] incremented X scene to 107 completed views
[Sequencer 05:46:48 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:46:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:46:48 INFO] incremented to [AERI set: name Y107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:46:48 INFO] X107.SIG(18)
[sigmove 05:46:48 DEBUG] transformed X107Ma.SPC -> X107MA.SPC
[sigmove 05:46:48 DEBUG] transformed X107Mb.SPC -> X107MB.SPC
[sigmove 05:46:48 DEBUG] transformed X107Mc.SPC -> X107MC.SPC
[sigmove 05:46:48 DEBUG] transformed X107Md.SPC -> X107MD.SPC
[sigmove 05:46:48 DEBUG] transformed X107Me.SPC -> X107ME.SPC
[sigmove 05:46:48 DEBUG] transformed X107Mf.SPC -> X107MF.SPC
[Status 05:46:48 INFO] data for X107 transferred to science data processing
[Tidy 05:46:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:46:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:46:48 INFO] resetting WatchDogTimer
[Status 05:46:49 INFO] Starting Set [AERI set: name Y107, 6 scans, 0 angle, D16300 command]
[Ingest 05:46:49 INFO] Sending XML status message
[Status 05:46:49 INFO] Mirror angle: 0
[Mirror 05:46:49 INFO] rotating to position Y
[Status 05:46:49 INFO] .SET file for ACQ96 ready
[Ingest 05:46:49 INFO] Starting acquisition
[Status 05:46:49 INFO] reading housekeeping
[Status 05:47:07 INFO] acquire complete
[Status 05:47:08 INFO] writing housekeeping
[Sequencer 05:47:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:47:08 INFO] incremented Y scene to 107 completed views
[Sequencer 05:47:08 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:47:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:47:08 INFO] incremented to [AERI set: name Z107, 6 scans, 0 angle, D16300 command] set
[sigmove 05:47:08 INFO] Y107.SIG(18)
[sigmove 05:47:08 DEBUG] transformed Y107Ma.SPC -> Y107MA.SPC
[sigmove 05:47:08 DEBUG] transformed Y107Mb.SPC -> Y107MB.SPC
[sigmove 05:47:08 DEBUG] transformed Y107Mc.SPC -> Y107MC.SPC
[sigmove 05:47:08 DEBUG] transformed Y107Md.SPC -> Y107MD.SPC
[sigmove 05:47:08 DEBUG] transformed Y107Me.SPC -> Y107ME.SPC
[sigmove 05:47:08 DEBUG] transformed Y107Mf.SPC -> Y107MF.SPC
[Status 05:47:08 INFO] data for Y107 transferred to science data processing
[Tidy 05:47:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:47:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:47:08 INFO] resetting WatchDogTimer
[Status 05:47:08 INFO] Starting Set [AERI set: name Z107, 6 scans, 0 angle, D16300 command]
[Ingest 05:47:08 INFO] Sending XML status message
[Status 05:47:08 INFO] Mirror angle: 0
[Mirror 05:47:08 INFO] rotating to position Z
[Status 05:47:08 INFO] .SET file for ACQ96 ready
[Ingest 05:47:08 INFO] Starting acquisition
[Status 05:47:08 INFO] reading housekeeping
[Status 05:47:26 INFO] acquire complete
[Status 05:47:27 INFO] writing housekeeping
[Sequencer 05:47:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:47:27 INFO] incremented Z scene to 107 completed views
[Sequencer 05:47:27 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:47:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:47:27 INFO] incremented to [AERI set: name A108, 6 scans, 120 angle, D28300 command] set
[sigmove 05:47:27 INFO] Z107.SIG(18)
[sigmove 05:47:27 DEBUG] transformed Z107Ma.SPC -> Z107MA.SPC
[sigmove 05:47:27 DEBUG] transformed Z107Mb.SPC -> Z107MB.SPC
[sigmove 05:47:27 DEBUG] transformed Z107Mc.SPC -> Z107MC.SPC
[sigmove 05:47:27 DEBUG] transformed Z107Md.SPC -> Z107MD.SPC
[sigmove 05:47:27 DEBUG] transformed Z107Me.SPC -> Z107ME.SPC
[sigmove 05:47:27 DEBUG] transformed Z107Mf.SPC -> Z107MF.SPC
[Status 05:47:27 INFO] data for Z107 transferred to science data processing
[Tidy 05:47:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:47:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:47:27 INFO] resetting WatchDogTimer
[Status 05:47:27 INFO] Starting Set [AERI set: name A108, 6 scans, 120 angle, D28300 command]
[Ingest 05:47:27 INFO] Sending XML status message
[Status 05:47:27 INFO] Mirror angle: 120
[Mirror 05:47:27 INFO] rotating to position A
[Status 05:47:28 INFO] .SET file for ACQ96 ready
[Ingest 05:47:28 INFO] Starting acquisition
[Status 05:47:29 INFO] reading housekeeping
[Status 05:47:46 INFO] acquire complete
[Status 05:47:47 INFO] writing housekeeping
[Sequencer 05:47:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:47:47 INFO] incremented A scene to 108 completed views
[Sequencer 05:47:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:47:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:47:47 INFO] incremented to [AERI set: name H108, 6 scans, 60 angle, D22500 command] set
[sigmove 05:47:47 INFO] A108.SIG(18)
[sigmove 05:47:47 DEBUG] transformed A108Ma.SPC -> A108MA.SPC
[sigmove 05:47:47 DEBUG] transformed A108Mb.SPC -> A108MB.SPC
[sigmove 05:47:47 DEBUG] transformed A108Mc.SPC -> A108MC.SPC
[sigmove 05:47:47 DEBUG] transformed A108Md.SPC -> A108MD.SPC
[sigmove 05:47:47 DEBUG] transformed A108Me.SPC -> A108ME.SPC
[sigmove 05:47:47 DEBUG] transformed A108Mf.SPC -> A108MF.SPC
[Status 05:47:47 INFO] data for A108 transferred to science data processing
[Tidy 05:47:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:47:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:47:47 INFO] resetting WatchDogTimer
[Status 05:47:47 INFO] Starting Set [AERI set: name H108, 6 scans, 60 angle, D22500 command]
[Ingest 05:47:47 INFO] Sending XML status message
[Status 05:47:47 INFO] Mirror angle: 60
[Mirror 05:47:47 INFO] rotating to position H
[Status 05:47:48 INFO] .SET file for ACQ96 ready
[Ingest 05:47:48 INFO] Starting acquisition
[Status 05:47:48 INFO] reading housekeeping
[Status 05:48:07 INFO] acquire complete
[Status 05:48:07 INFO] writing housekeeping
[Sequencer 05:48:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:48:07 INFO] incremented H scene to 108 completed views
[Sequencer 05:48:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:48:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:48:07 INFO] incremented to [AERI set: name S108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:48:07 INFO] H108.SIG(18)
[sigmove 05:48:07 DEBUG] transformed H108Ma.SPC -> H108MA.SPC
[sigmove 05:48:07 DEBUG] transformed H108Mb.SPC -> H108MB.SPC
[sigmove 05:48:07 DEBUG] transformed H108Mc.SPC -> H108MC.SPC
[sigmove 05:48:07 DEBUG] transformed H108Md.SPC -> H108MD.SPC
[sigmove 05:48:07 DEBUG] transformed H108Me.SPC -> H108ME.SPC
[sigmove 05:48:07 DEBUG] transformed H108Mf.SPC -> H108MF.SPC
[Status 05:48:07 INFO] data for H108 transferred to science data processing
[Tidy 05:48:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:48:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:48:07 INFO] resetting WatchDogTimer
[Status 05:48:07 INFO] Starting Set [AERI set: name S108, 6 scans, 0 angle, D16300 command]
[Ingest 05:48:07 INFO] Sending XML status message
[Status 05:48:07 INFO] Mirror angle: 0
[Mirror 05:48:07 INFO] rotating to position S
[Status 05:48:08 INFO] .SET file for ACQ96 ready
[Ingest 05:48:08 INFO] Starting acquisition
[Status 05:48:08 INFO] reading housekeeping
[Status 05:48:27 INFO] acquire complete
[Status 05:48:27 INFO] writing housekeeping
[Sequencer 05:48:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:48:27 INFO] incremented S scene to 108 completed views
[Sequencer 05:48:27 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:48:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:48:27 INFO] incremented to [AERI set: name T108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:48:27 INFO] S108.SIG(18)
[sigmove 05:48:27 DEBUG] transformed S108Ma.SPC -> S108MA.SPC
[sigmove 05:48:27 DEBUG] transformed S108Mb.SPC -> S108MB.SPC
[sigmove 05:48:27 DEBUG] transformed S108Mc.SPC -> S108MC.SPC
[sigmove 05:48:27 DEBUG] transformed S108Md.SPC -> S108MD.SPC
[sigmove 05:48:27 DEBUG] transformed S108Me.SPC -> S108ME.SPC
[sigmove 05:48:27 DEBUG] transformed S108Mf.SPC -> S108MF.SPC
[Status 05:48:27 INFO] data for S108 transferred to science data processing
[Tidy 05:48:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:48:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:48:27 INFO] resetting WatchDogTimer
[Status 05:48:27 INFO] Starting Set [AERI set: name T108, 6 scans, 0 angle, D16300 command]
[Ingest 05:48:27 INFO] Sending XML status message
[Status 05:48:27 INFO] Mirror angle: 0
[Mirror 05:48:28 INFO] rotating to position T
[Status 05:48:28 INFO] .SET file for ACQ96 ready
[Ingest 05:48:28 INFO] Starting acquisition
[Status 05:48:28 INFO] reading housekeeping
[Status 05:48:46 INFO] acquire complete
[Status 05:48:46 INFO] writing housekeeping
[Sequencer 05:48:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:48:46 INFO] incremented T scene to 108 completed views
[Sequencer 05:48:46 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:48:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:48:46 INFO] incremented to [AERI set: name U108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:48:46 INFO] T108.SIG(18)
[sigmove 05:48:46 DEBUG] transformed T108Ma.SPC -> T108MA.SPC
[sigmove 05:48:46 DEBUG] transformed T108Mb.SPC -> T108MB.SPC
[sigmove 05:48:46 DEBUG] transformed T108Mc.SPC -> T108MC.SPC
[sigmove 05:48:46 DEBUG] transformed T108Md.SPC -> T108MD.SPC
[sigmove 05:48:46 DEBUG] transformed T108Me.SPC -> T108ME.SPC
[sigmove 05:48:46 DEBUG] transformed T108Mf.SPC -> T108MF.SPC
[Status 05:48:46 INFO] data for T108 transferred to science data processing
[Tidy 05:48:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:48:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:48:46 INFO] resetting WatchDogTimer
[Status 05:48:46 INFO] Starting Set [AERI set: name U108, 6 scans, 0 angle, D16300 command]
[Ingest 05:48:46 INFO] Sending XML status message
[Status 05:48:46 INFO] Mirror angle: 0
[Mirror 05:48:47 INFO] rotating to position U
[Status 05:48:47 INFO] .SET file for ACQ96 ready
[Ingest 05:48:47 INFO] Starting acquisition
[Status 05:48:47 INFO] reading housekeeping
[Status 05:49:05 INFO] acquire complete
[Status 05:49:05 INFO] writing housekeeping
[Sequencer 05:49:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:49:05 INFO] incremented U scene to 108 completed views
[Sequencer 05:49:05 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:49:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:49:05 INFO] incremented to [AERI set: name V108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:49:05 INFO] U108.SIG(18)
[sigmove 05:49:05 DEBUG] transformed U108Ma.SPC -> U108MA.SPC
[sigmove 05:49:05 DEBUG] transformed U108Mb.SPC -> U108MB.SPC
[sigmove 05:49:05 DEBUG] transformed U108Mc.SPC -> U108MC.SPC
[sigmove 05:49:05 DEBUG] transformed U108Md.SPC -> U108MD.SPC
[sigmove 05:49:05 DEBUG] transformed U108Me.SPC -> U108ME.SPC
[sigmove 05:49:05 DEBUG] transformed U108Mf.SPC -> U108MF.SPC
[Status 05:49:05 INFO] data for U108 transferred to science data processing
[Tidy 05:49:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:49:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:49:05 INFO] resetting WatchDogTimer
[Status 05:49:06 INFO] Starting Set [AERI set: name V108, 6 scans, 0 angle, D16300 command]
[Ingest 05:49:06 INFO] Sending XML status message
[Status 05:49:06 INFO] Mirror angle: 0
[Mirror 05:49:06 INFO] rotating to position V
[Status 05:49:06 INFO] .SET file for ACQ96 ready
[Ingest 05:49:06 INFO] Starting acquisition
[Status 05:49:06 INFO] reading housekeeping
[Status 05:49:24 INFO] acquire complete
[Status 05:49:24 INFO] writing housekeeping
[Sequencer 05:49:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:49:24 INFO] incremented V scene to 108 completed views
[Sequencer 05:49:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:49:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:49:24 INFO] incremented to [AERI set: name W108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:49:24 INFO] V108.SIG(18)
[sigmove 05:49:24 DEBUG] transformed V108Ma.SPC -> V108MA.SPC
[sigmove 05:49:24 DEBUG] transformed V108Mb.SPC -> V108MB.SPC
[sigmove 05:49:24 DEBUG] transformed V108Mc.SPC -> V108MC.SPC
[sigmove 05:49:24 DEBUG] transformed V108Md.SPC -> V108MD.SPC
[sigmove 05:49:24 DEBUG] transformed V108Me.SPC -> V108ME.SPC
[sigmove 05:49:24 DEBUG] transformed V108Mf.SPC -> V108MF.SPC
[Status 05:49:24 INFO] data for V108 transferred to science data processing
[Tidy 05:49:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:49:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:49:24 INFO] resetting WatchDogTimer
[Status 05:49:25 INFO] Starting Set [AERI set: name W108, 6 scans, 0 angle, D16300 command]
[Ingest 05:49:25 INFO] Sending XML status message
[Status 05:49:25 INFO] Mirror angle: 0
[Mirror 05:49:25 INFO] rotating to position W
[Status 05:49:25 INFO] .SET file for ACQ96 ready
[Ingest 05:49:25 INFO] Starting acquisition
[Status 05:49:25 INFO] reading housekeeping
[Status 05:49:43 INFO] acquire complete
[Status 05:49:44 INFO] writing housekeeping
[Sequencer 05:49:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:49:44 INFO] incremented W scene to 108 completed views
[Sequencer 05:49:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:49:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:49:44 INFO] incremented to [AERI set: name X108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:49:44 INFO] W108.SIG(18)
[sigmove 05:49:44 DEBUG] transformed W108Ma.SPC -> W108MA.SPC
[sigmove 05:49:44 DEBUG] transformed W108Mb.SPC -> W108MB.SPC
[sigmove 05:49:44 DEBUG] transformed W108Mc.SPC -> W108MC.SPC
[sigmove 05:49:44 DEBUG] transformed W108Md.SPC -> W108MD.SPC
[sigmove 05:49:44 DEBUG] transformed W108Me.SPC -> W108ME.SPC
[sigmove 05:49:44 DEBUG] transformed W108Mf.SPC -> W108MF.SPC
[Status 05:49:44 INFO] data for W108 transferred to science data processing
[Tidy 05:49:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:49:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:49:44 INFO] resetting WatchDogTimer
[Status 05:49:44 INFO] Starting Set [AERI set: name X108, 6 scans, 0 angle, D16300 command]
[Ingest 05:49:44 INFO] Sending XML status message
[Status 05:49:44 INFO] Mirror angle: 0
[Mirror 05:49:44 INFO] rotating to position X
[Status 05:49:44 INFO] .SET file for ACQ96 ready
[Ingest 05:49:44 INFO] Starting acquisition
[Status 05:49:44 INFO] reading housekeeping
[Status 05:50:02 INFO] acquire complete
[Status 05:50:03 INFO] writing housekeeping
[Sequencer 05:50:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:50:03 INFO] incremented X scene to 108 completed views
[Sequencer 05:50:03 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:50:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:50:03 INFO] incremented to [AERI set: name Y108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:50:03 INFO] X108.SIG(18)
[sigmove 05:50:03 DEBUG] transformed X108Ma.SPC -> X108MA.SPC
[sigmove 05:50:03 DEBUG] transformed X108Mb.SPC -> X108MB.SPC
[sigmove 05:50:03 DEBUG] transformed X108Mc.SPC -> X108MC.SPC
[sigmove 05:50:03 DEBUG] transformed X108Md.SPC -> X108MD.SPC
[sigmove 05:50:03 DEBUG] transformed X108Me.SPC -> X108ME.SPC
[sigmove 05:50:03 DEBUG] transformed X108Mf.SPC -> X108MF.SPC
[Status 05:50:03 INFO] data for X108 transferred to science data processing
[Tidy 05:50:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:50:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:50:03 INFO] resetting WatchDogTimer
[Status 05:50:03 INFO] Starting Set [AERI set: name Y108, 6 scans, 0 angle, D16300 command]
[Ingest 05:50:03 INFO] Sending XML status message
[Status 05:50:03 INFO] Mirror angle: 0
[Mirror 05:50:03 INFO] rotating to position Y
[Status 05:50:03 INFO] .SET file for ACQ96 ready
[Ingest 05:50:03 INFO] Starting acquisition
[Status 05:50:04 INFO] reading housekeeping
[Status 05:50:21 INFO] acquire complete
[Status 05:50:22 INFO] writing housekeeping
[Sequencer 05:50:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:50:22 INFO] incremented Y scene to 108 completed views
[Sequencer 05:50:22 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:50:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:50:22 INFO] incremented to [AERI set: name Z108, 6 scans, 0 angle, D16300 command] set
[sigmove 05:50:22 INFO] Y108.SIG(18)
[sigmove 05:50:22 DEBUG] transformed Y108Ma.SPC -> Y108MA.SPC
[sigmove 05:50:22 DEBUG] transformed Y108Mb.SPC -> Y108MB.SPC
[sigmove 05:50:22 DEBUG] transformed Y108Mc.SPC -> Y108MC.SPC
[sigmove 05:50:22 DEBUG] transformed Y108Md.SPC -> Y108MD.SPC
[sigmove 05:50:22 DEBUG] transformed Y108Me.SPC -> Y108ME.SPC
[sigmove 05:50:22 DEBUG] transformed Y108Mf.SPC -> Y108MF.SPC
[Status 05:50:22 INFO] data for Y108 transferred to science data processing
[Tidy 05:50:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:50:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:50:22 INFO] resetting WatchDogTimer
[Status 05:50:22 INFO] Starting Set [AERI set: name Z108, 6 scans, 0 angle, D16300 command]
[Ingest 05:50:22 INFO] Sending XML status message
[Status 05:50:22 INFO] Mirror angle: 0
[Mirror 05:50:22 INFO] rotating to position Z
[Status 05:50:22 INFO] .SET file for ACQ96 ready
[Ingest 05:50:22 INFO] Starting acquisition
[Status 05:50:23 INFO] reading housekeeping
[Status 05:50:40 INFO] acquire complete
[Status 05:50:41 INFO] writing housekeeping
[Sequencer 05:50:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:50:41 INFO] incremented Z scene to 108 completed views
[Sequencer 05:50:41 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:50:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:50:41 INFO] incremented to [AERI set: name H109, 6 scans, 60 angle, D22500 command] set
[sigmove 05:50:41 INFO] Z108.SIG(18)
[sigmove 05:50:41 DEBUG] transformed Z108Ma.SPC -> Z108MA.SPC
[sigmove 05:50:41 DEBUG] transformed Z108Mb.SPC -> Z108MB.SPC
[sigmove 05:50:41 DEBUG] transformed Z108Mc.SPC -> Z108MC.SPC
[sigmove 05:50:41 DEBUG] transformed Z108Md.SPC -> Z108MD.SPC
[sigmove 05:50:41 DEBUG] transformed Z108Me.SPC -> Z108ME.SPC
[sigmove 05:50:41 DEBUG] transformed Z108Mf.SPC -> Z108MF.SPC
[Status 05:50:41 INFO] data for Z108 transferred to science data processing
[Tidy 05:50:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:50:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:50:41 INFO] resetting WatchDogTimer
[Status 05:50:41 INFO] Starting Set [AERI set: name H109, 6 scans, 60 angle, D22500 command]
[Ingest 05:50:41 INFO] Sending XML status message
[Status 05:50:41 INFO] Mirror angle: 60
[Mirror 05:50:41 INFO] rotating to position H
[Status 05:50:42 INFO] .SET file for ACQ96 ready
[Ingest 05:50:42 INFO] Starting acquisition
[Status 05:50:42 INFO] reading housekeeping
[Status 05:51:01 INFO] acquire complete
[Status 05:51:01 INFO] writing housekeeping
[Sequencer 05:51:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:51:01 INFO] incremented H scene to 109 completed views
[Sequencer 05:51:01 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:51:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:51:01 INFO] incremented to [AERI set: name A109, 6 scans, 120 angle, D28300 command] set
[sigmove 05:51:01 INFO] H109.SIG(18)
[sigmove 05:51:01 DEBUG] transformed H109Ma.SPC -> H109MA.SPC
[sigmove 05:51:01 DEBUG] transformed H109Mb.SPC -> H109MB.SPC
[sigmove 05:51:01 DEBUG] transformed H109Mc.SPC -> H109MC.SPC
[sigmove 05:51:01 DEBUG] transformed H109Md.SPC -> H109MD.SPC
[sigmove 05:51:01 DEBUG] transformed H109Me.SPC -> H109ME.SPC
[sigmove 05:51:01 DEBUG] transformed H109Mf.SPC -> H109MF.SPC
[Status 05:51:01 INFO] data for H109 transferred to science data processing
[Tidy 05:51:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:51:01 INFO] A107.FIN(19),H107.FIN(19),S107.FIN(19),T107.FIN(19),U107.FIN(19),V107.FIN(19),W107.FIN(19),X107.FIN(19),Y107.FIN(19),Z107.FIN(19),A108.FIN(19),H108.FIN(19),S108.FIN(19),T108.FIN(19),U108.FIN(19),V108.FIN(19),W108.FIN(19),X108.FIN(19),Y108.FIN(19),Z108.FIN(19)
[sigmove 05:51:01 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:51:01 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:51:03 DEBUG] done zipping
[WatchDog 05:51:03 INFO] resetting WatchDogTimer
[Status 05:51:03 INFO] Starting Set [AERI set: name A109, 6 scans, 120 angle, D28300 command]
[Ingest 05:51:03 INFO] Sending XML status message
[Status 05:51:03 INFO] Mirror angle: 120
[Mirror 05:51:04 INFO] rotating to position A
[Status 05:51:04 INFO] .SET file for ACQ96 ready
[Ingest 05:51:04 INFO] Starting acquisition
[Status 05:51:05 INFO] reading housekeeping
[Status 05:51:23 INFO] acquire complete
[Status 05:51:23 INFO] writing housekeeping
[Sequencer 05:51:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:51:23 INFO] incremented A scene to 109 completed views
[Sequencer 05:51:23 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:51:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:51:23 INFO] incremented to [AERI set: name S109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:51:23 INFO] A109.SIG(18)
[sigmove 05:51:24 DEBUG] transformed A109Ma.SPC -> A109MA.SPC
[sigmove 05:51:24 DEBUG] transformed A109Mb.SPC -> A109MB.SPC
[sigmove 05:51:24 DEBUG] transformed A109Mc.SPC -> A109MC.SPC
[sigmove 05:51:24 DEBUG] transformed A109Md.SPC -> A109MD.SPC
[sigmove 05:51:24 DEBUG] transformed A109Me.SPC -> A109ME.SPC
[sigmove 05:51:24 DEBUG] transformed A109Mf.SPC -> A109MF.SPC
[Status 05:51:24 INFO] data for A109 transferred to science data processing
[Tidy 05:51:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:51:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:51:24 INFO] resetting WatchDogTimer
[Status 05:51:24 INFO] Starting Set [AERI set: name S109, 6 scans, 0 angle, D16300 command]
[Ingest 05:51:24 INFO] Sending XML status message
[Status 05:51:24 INFO] Mirror angle: 0
[Mirror 05:51:24 INFO] rotating to position S
[Status 05:51:25 INFO] .SET file for ACQ96 ready
[Ingest 05:51:25 INFO] Starting acquisition
[Status 05:51:25 INFO] reading housekeeping
[Status 05:51:43 INFO] acquire complete
[Status 05:51:44 INFO] writing housekeeping
[Sequencer 05:51:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:51:44 INFO] incremented S scene to 109 completed views
[Sequencer 05:51:44 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:51:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:51:44 INFO] incremented to [AERI set: name T109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:51:44 INFO] S109.SIG(18)
[sigmove 05:51:44 DEBUG] transformed S109Ma.SPC -> S109MA.SPC
[sigmove 05:51:44 DEBUG] transformed S109Mb.SPC -> S109MB.SPC
[sigmove 05:51:44 DEBUG] transformed S109Mc.SPC -> S109MC.SPC
[sigmove 05:51:44 DEBUG] transformed S109Md.SPC -> S109MD.SPC
[sigmove 05:51:44 DEBUG] transformed S109Me.SPC -> S109ME.SPC
[sigmove 05:51:44 DEBUG] transformed S109Mf.SPC -> S109MF.SPC
[Status 05:51:44 INFO] data for S109 transferred to science data processing
[Tidy 05:51:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:51:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:51:44 INFO] resetting WatchDogTimer
[Status 05:51:44 INFO] Starting Set [AERI set: name T109, 6 scans, 0 angle, D16300 command]
[Ingest 05:51:44 INFO] Sending XML status message
[Status 05:51:44 INFO] Mirror angle: 0
[Mirror 05:51:44 INFO] rotating to position T
[Status 05:51:44 INFO] .SET file for ACQ96 ready
[Ingest 05:51:45 INFO] Starting acquisition
[Status 05:51:45 INFO] reading housekeeping
[Status 05:52:02 INFO] acquire complete
[Status 05:52:03 INFO] writing housekeeping
[Sequencer 05:52:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:52:03 INFO] incremented T scene to 109 completed views
[Sequencer 05:52:03 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:52:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:52:03 INFO] incremented to [AERI set: name U109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:52:03 INFO] T109.SIG(18)
[sigmove 05:52:03 DEBUG] transformed T109Ma.SPC -> T109MA.SPC
[sigmove 05:52:03 DEBUG] transformed T109Mb.SPC -> T109MB.SPC
[sigmove 05:52:03 DEBUG] transformed T109Mc.SPC -> T109MC.SPC
[sigmove 05:52:03 DEBUG] transformed T109Md.SPC -> T109MD.SPC
[sigmove 05:52:03 DEBUG] transformed T109Me.SPC -> T109ME.SPC
[sigmove 05:52:03 DEBUG] transformed T109Mf.SPC -> T109MF.SPC
[Status 05:52:03 INFO] data for T109 transferred to science data processing
[Tidy 05:52:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:52:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:52:03 INFO] resetting WatchDogTimer
[Status 05:52:03 INFO] Starting Set [AERI set: name U109, 6 scans, 0 angle, D16300 command]
[Ingest 05:52:03 INFO] Sending XML status message
[Status 05:52:03 INFO] Mirror angle: 0
[Mirror 05:52:03 INFO] rotating to position U
[Status 05:52:03 INFO] .SET file for ACQ96 ready
[Ingest 05:52:04 INFO] Starting acquisition
[Status 05:52:04 INFO] reading housekeeping
[Status 05:52:21 INFO] acquire complete
[Status 05:52:22 INFO] writing housekeeping
[Sequencer 05:52:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:52:22 INFO] incremented U scene to 109 completed views
[Sequencer 05:52:22 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:52:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:52:22 INFO] incremented to [AERI set: name V109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:52:22 INFO] U109.SIG(18)
[sigmove 05:52:22 DEBUG] transformed U109Ma.SPC -> U109MA.SPC
[sigmove 05:52:22 DEBUG] transformed U109Mb.SPC -> U109MB.SPC
[sigmove 05:52:22 DEBUG] transformed U109Mc.SPC -> U109MC.SPC
[sigmove 05:52:22 DEBUG] transformed U109Md.SPC -> U109MD.SPC
[sigmove 05:52:22 DEBUG] transformed U109Me.SPC -> U109ME.SPC
[sigmove 05:52:22 DEBUG] transformed U109Mf.SPC -> U109MF.SPC
[Status 05:52:22 INFO] data for U109 transferred to science data processing
[Tidy 05:52:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:52:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:52:22 INFO] resetting WatchDogTimer
[Status 05:52:22 INFO] Starting Set [AERI set: name V109, 6 scans, 0 angle, D16300 command]
[Ingest 05:52:22 INFO] Sending XML status message
[Status 05:52:22 INFO] Mirror angle: 0
[Mirror 05:52:22 INFO] rotating to position V
[Status 05:52:22 INFO] .SET file for ACQ96 ready
[Ingest 05:52:23 INFO] Starting acquisition
[Status 05:52:23 INFO] reading housekeeping
[Status 05:52:40 INFO] acquire complete
[Status 05:52:41 INFO] writing housekeeping
[Sequencer 05:52:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:52:41 INFO] incremented V scene to 109 completed views
[Sequencer 05:52:41 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:52:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:52:41 INFO] incremented to [AERI set: name W109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:52:41 INFO] V109.SIG(18)
[sigmove 05:52:41 DEBUG] transformed V109Ma.SPC -> V109MA.SPC
[sigmove 05:52:41 DEBUG] transformed V109Mb.SPC -> V109MB.SPC
[sigmove 05:52:41 DEBUG] transformed V109Mc.SPC -> V109MC.SPC
[sigmove 05:52:41 DEBUG] transformed V109Md.SPC -> V109MD.SPC
[sigmove 05:52:41 DEBUG] transformed V109Me.SPC -> V109ME.SPC
[sigmove 05:52:41 DEBUG] transformed V109Mf.SPC -> V109MF.SPC
[Status 05:52:41 INFO] data for V109 transferred to science data processing
[Tidy 05:52:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:52:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:52:41 INFO] resetting WatchDogTimer
[Status 05:52:41 INFO] Starting Set [AERI set: name W109, 6 scans, 0 angle, D16300 command]
[Ingest 05:52:41 INFO] Sending XML status message
[Status 05:52:41 INFO] Mirror angle: 0
[Mirror 05:52:41 INFO] rotating to position W
[Status 05:52:42 INFO] .SET file for ACQ96 ready
[Ingest 05:52:42 INFO] Starting acquisition
[Status 05:52:42 INFO] reading housekeeping
[Status 05:53:00 INFO] acquire complete
[Status 05:53:00 INFO] writing housekeeping
[Sequencer 05:53:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:53:00 INFO] incremented W scene to 109 completed views
[Sequencer 05:53:00 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:53:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:53:00 INFO] incremented to [AERI set: name X109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:53:00 INFO] W109.SIG(18)
[sigmove 05:53:00 DEBUG] transformed W109Ma.SPC -> W109MA.SPC
[sigmove 05:53:00 DEBUG] transformed W109Mb.SPC -> W109MB.SPC
[sigmove 05:53:00 DEBUG] transformed W109Mc.SPC -> W109MC.SPC
[sigmove 05:53:00 DEBUG] transformed W109Md.SPC -> W109MD.SPC
[sigmove 05:53:00 DEBUG] transformed W109Me.SPC -> W109ME.SPC
[sigmove 05:53:00 DEBUG] transformed W109Mf.SPC -> W109MF.SPC
[Status 05:53:00 INFO] data for W109 transferred to science data processing
[Tidy 05:53:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:53:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:53:00 INFO] resetting WatchDogTimer
[Status 05:53:00 INFO] Starting Set [AERI set: name X109, 6 scans, 0 angle, D16300 command]
[Ingest 05:53:00 INFO] Sending XML status message
[Status 05:53:00 INFO] Mirror angle: 0
[Mirror 05:53:00 INFO] rotating to position X
[Status 05:53:01 INFO] .SET file for ACQ96 ready
[Ingest 05:53:01 INFO] Starting acquisition
[Status 05:53:01 INFO] reading housekeeping
[Status 05:53:19 INFO] acquire complete
[Status 05:53:19 INFO] writing housekeeping
[Sequencer 05:53:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:53:19 INFO] incremented X scene to 109 completed views
[Sequencer 05:53:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:53:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:53:19 INFO] incremented to [AERI set: name Y109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:53:19 INFO] X109.SIG(18)
[sigmove 05:53:19 DEBUG] transformed X109Ma.SPC -> X109MA.SPC
[sigmove 05:53:19 DEBUG] transformed X109Mb.SPC -> X109MB.SPC
[sigmove 05:53:19 DEBUG] transformed X109Mc.SPC -> X109MC.SPC
[sigmove 05:53:19 DEBUG] transformed X109Md.SPC -> X109MD.SPC
[sigmove 05:53:19 DEBUG] transformed X109Me.SPC -> X109ME.SPC
[sigmove 05:53:19 DEBUG] transformed X109Mf.SPC -> X109MF.SPC
[Status 05:53:19 INFO] data for X109 transferred to science data processing
[Tidy 05:53:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:53:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:53:19 INFO] resetting WatchDogTimer
[Status 05:53:19 INFO] Starting Set [AERI set: name Y109, 6 scans, 0 angle, D16300 command]
[Ingest 05:53:19 INFO] Sending XML status message
[Status 05:53:19 INFO] Mirror angle: 0
[Mirror 05:53:19 INFO] rotating to position Y
[Status 05:53:20 INFO] .SET file for ACQ96 ready
[Ingest 05:53:20 INFO] Starting acquisition
[Status 05:53:20 INFO] reading housekeeping
[Status 05:53:38 INFO] acquire complete
[Status 05:53:38 INFO] writing housekeeping
[Sequencer 05:53:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:53:38 INFO] incremented Y scene to 109 completed views
[Sequencer 05:53:38 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:53:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:53:38 INFO] incremented to [AERI set: name Z109, 6 scans, 0 angle, D16300 command] set
[sigmove 05:53:38 INFO] Y109.SIG(18)
[sigmove 05:53:38 DEBUG] transformed Y109Ma.SPC -> Y109MA.SPC
[sigmove 05:53:38 DEBUG] transformed Y109Mb.SPC -> Y109MB.SPC
[sigmove 05:53:38 DEBUG] transformed Y109Mc.SPC -> Y109MC.SPC
[sigmove 05:53:38 DEBUG] transformed Y109Md.SPC -> Y109MD.SPC
[sigmove 05:53:38 DEBUG] transformed Y109Me.SPC -> Y109ME.SPC
[sigmove 05:53:38 DEBUG] transformed Y109Mf.SPC -> Y109MF.SPC
[Status 05:53:38 INFO] data for Y109 transferred to science data processing
[Tidy 05:53:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:53:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:53:38 INFO] resetting WatchDogTimer
[Status 05:53:38 INFO] Starting Set [AERI set: name Z109, 6 scans, 0 angle, D16300 command]
[Ingest 05:53:38 INFO] Sending XML status message
[Status 05:53:38 INFO] Mirror angle: 0
[Mirror 05:53:39 INFO] rotating to position Z
[Status 05:53:39 INFO] .SET file for ACQ96 ready
[Ingest 05:53:39 INFO] Starting acquisition
[Status 05:53:39 INFO] reading housekeeping
[Status 05:53:57 INFO] acquire complete
[Status 05:53:57 INFO] writing housekeeping
[Sequencer 05:53:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:53:57 INFO] incremented Z scene to 109 completed views
[Sequencer 05:53:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:53:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:53:57 INFO] incremented to [AERI set: name A110, 6 scans, 120 angle, D28300 command] set
[sigmove 05:53:57 INFO] Z109.SIG(18)
[sigmove 05:53:57 DEBUG] transformed Z109Ma.SPC -> Z109MA.SPC
[sigmove 05:53:57 DEBUG] transformed Z109Mb.SPC -> Z109MB.SPC
[sigmove 05:53:57 DEBUG] transformed Z109Mc.SPC -> Z109MC.SPC
[sigmove 05:53:57 DEBUG] transformed Z109Md.SPC -> Z109MD.SPC
[sigmove 05:53:57 DEBUG] transformed Z109Me.SPC -> Z109ME.SPC
[sigmove 05:53:57 DEBUG] transformed Z109Mf.SPC -> Z109MF.SPC
[Status 05:53:57 INFO] data for Z109 transferred to science data processing
[Tidy 05:53:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:53:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:53:57 INFO] resetting WatchDogTimer
[Status 05:53:57 INFO] Starting Set [AERI set: name A110, 6 scans, 120 angle, D28300 command]
[Ingest 05:53:57 INFO] Sending XML status message
[Status 05:53:57 INFO] Mirror angle: 120
[Mirror 05:53:58 INFO] rotating to position A
[Status 05:53:59 INFO] .SET file for ACQ96 ready
[Ingest 05:53:59 INFO] Starting acquisition
[Status 05:53:59 INFO] reading housekeeping
[Status 05:54:17 INFO] acquire complete
[Status 05:54:18 INFO] writing housekeeping
[Sequencer 05:54:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:54:18 INFO] incremented A scene to 110 completed views
[Sequencer 05:54:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:54:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:54:18 INFO] incremented to [AERI set: name H110, 6 scans, 60 angle, D22500 command] set
[sigmove 05:54:18 INFO] A110.SIG(18)
[sigmove 05:54:18 DEBUG] transformed A110Ma.SPC -> A110MA.SPC
[sigmove 05:54:18 DEBUG] transformed A110Mb.SPC -> A110MB.SPC
[sigmove 05:54:18 DEBUG] transformed A110Mc.SPC -> A110MC.SPC
[sigmove 05:54:18 DEBUG] transformed A110Md.SPC -> A110MD.SPC
[sigmove 05:54:18 DEBUG] transformed A110Me.SPC -> A110ME.SPC
[sigmove 05:54:18 DEBUG] transformed A110Mf.SPC -> A110MF.SPC
[Status 05:54:18 INFO] data for A110 transferred to science data processing
[Tidy 05:54:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:54:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:54:18 INFO] resetting WatchDogTimer
[Status 05:54:18 INFO] Starting Set [AERI set: name H110, 6 scans, 60 angle, D22500 command]
[Ingest 05:54:18 INFO] Sending XML status message
[Status 05:54:18 INFO] Mirror angle: 60
[Mirror 05:54:18 INFO] rotating to position H
[Status 05:54:19 INFO] .SET file for ACQ96 ready
[Ingest 05:54:19 INFO] Starting acquisition
[Status 05:54:19 INFO] reading housekeeping
[Status 05:54:37 INFO] acquire complete
[Status 05:54:38 INFO] writing housekeeping
[Sequencer 05:54:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:54:38 INFO] incremented H scene to 110 completed views
[Sequencer 05:54:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:54:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:54:38 INFO] incremented to [AERI set: name S110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:54:38 INFO] H110.SIG(18)
[sigmove 05:54:38 DEBUG] transformed H110Ma.SPC -> H110MA.SPC
[sigmove 05:54:38 DEBUG] transformed H110Mb.SPC -> H110MB.SPC
[sigmove 05:54:38 DEBUG] transformed H110Mc.SPC -> H110MC.SPC
[sigmove 05:54:38 DEBUG] transformed H110Md.SPC -> H110MD.SPC
[sigmove 05:54:38 DEBUG] transformed H110Me.SPC -> H110ME.SPC
[sigmove 05:54:38 DEBUG] transformed H110Mf.SPC -> H110MF.SPC
[Status 05:54:38 INFO] data for H110 transferred to science data processing
[Tidy 05:54:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:54:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:54:38 INFO] resetting WatchDogTimer
[Status 05:54:38 INFO] Starting Set [AERI set: name S110, 6 scans, 0 angle, D16300 command]
[Ingest 05:54:38 INFO] Sending XML status message
[Status 05:54:38 INFO] Mirror angle: 0
[Mirror 05:54:38 INFO] rotating to position S
[Status 05:54:39 INFO] .SET file for ACQ96 ready
[Ingest 05:54:39 INFO] Starting acquisition
[Status 05:54:39 INFO] reading housekeeping
[Status 05:54:57 INFO] acquire complete
[Status 05:54:58 INFO] writing housekeeping
[Sequencer 05:54:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:54:58 INFO] incremented S scene to 110 completed views
[Sequencer 05:54:58 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:54:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:54:58 INFO] incremented to [AERI set: name T110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:54:58 INFO] S110.SIG(18)
[sigmove 05:54:58 DEBUG] transformed S110Ma.SPC -> S110MA.SPC
[sigmove 05:54:58 DEBUG] transformed S110Mb.SPC -> S110MB.SPC
[sigmove 05:54:58 DEBUG] transformed S110Mc.SPC -> S110MC.SPC
[sigmove 05:54:58 DEBUG] transformed S110Md.SPC -> S110MD.SPC
[sigmove 05:54:58 DEBUG] transformed S110Me.SPC -> S110ME.SPC
[sigmove 05:54:58 DEBUG] transformed S110Mf.SPC -> S110MF.SPC
[Status 05:54:58 INFO] data for S110 transferred to science data processing
[Tidy 05:54:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:54:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:54:58 INFO] resetting WatchDogTimer
[Status 05:54:58 INFO] Starting Set [AERI set: name T110, 6 scans, 0 angle, D16300 command]
[Ingest 05:54:58 INFO] Sending XML status message
[Status 05:54:58 INFO] Mirror angle: 0
[Mirror 05:54:58 INFO] rotating to position T
[Status 05:54:58 INFO] .SET file for ACQ96 ready
[Ingest 05:54:59 INFO] Starting acquisition
[Status 05:54:59 INFO] reading housekeeping
[Status 05:55:16 INFO] acquire complete
[Status 05:55:17 INFO] writing housekeeping
[Sequencer 05:55:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:55:17 INFO] incremented T scene to 110 completed views
[Sequencer 05:55:17 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:55:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:55:17 INFO] incremented to [AERI set: name U110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:55:17 INFO] T110.SIG(18)
[sigmove 05:55:17 DEBUG] transformed T110Ma.SPC -> T110MA.SPC
[sigmove 05:55:17 DEBUG] transformed T110Mb.SPC -> T110MB.SPC
[sigmove 05:55:17 DEBUG] transformed T110Mc.SPC -> T110MC.SPC
[sigmove 05:55:17 DEBUG] transformed T110Md.SPC -> T110MD.SPC
[sigmove 05:55:17 DEBUG] transformed T110Me.SPC -> T110ME.SPC
[sigmove 05:55:17 DEBUG] transformed T110Mf.SPC -> T110MF.SPC
[Status 05:55:17 INFO] data for T110 transferred to science data processing
[Tidy 05:55:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:55:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:55:17 INFO] resetting WatchDogTimer
[Status 05:55:17 INFO] Starting Set [AERI set: name U110, 6 scans, 0 angle, D16300 command]
[Ingest 05:55:17 INFO] Sending XML status message
[Status 05:55:17 INFO] Mirror angle: 0
[Mirror 05:55:17 INFO] rotating to position U
[Status 05:55:18 INFO] .SET file for ACQ96 ready
[Ingest 05:55:18 INFO] Starting acquisition
[Status 05:55:18 INFO] reading housekeeping
[Status 05:55:36 INFO] acquire complete
[Status 05:55:36 INFO] writing housekeeping
[Sequencer 05:55:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:55:36 INFO] incremented U scene to 110 completed views
[Sequencer 05:55:36 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:55:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:55:36 INFO] incremented to [AERI set: name V110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:55:36 INFO] U110.SIG(18)
[sigmove 05:55:36 DEBUG] transformed U110Ma.SPC -> U110MA.SPC
[sigmove 05:55:36 DEBUG] transformed U110Mb.SPC -> U110MB.SPC
[sigmove 05:55:36 DEBUG] transformed U110Mc.SPC -> U110MC.SPC
[sigmove 05:55:36 DEBUG] transformed U110Md.SPC -> U110MD.SPC
[sigmove 05:55:36 DEBUG] transformed U110Me.SPC -> U110ME.SPC
[sigmove 05:55:36 DEBUG] transformed U110Mf.SPC -> U110MF.SPC
[Status 05:55:36 INFO] data for U110 transferred to science data processing
[Tidy 05:55:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:55:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:55:36 INFO] resetting WatchDogTimer
[Status 05:55:36 INFO] Starting Set [AERI set: name V110, 6 scans, 0 angle, D16300 command]
[Ingest 05:55:36 INFO] Sending XML status message
[Status 05:55:36 INFO] Mirror angle: 0
[Mirror 05:55:36 INFO] rotating to position V
[Status 05:55:37 INFO] .SET file for ACQ96 ready
[Ingest 05:55:37 INFO] Starting acquisition
[Status 05:55:37 INFO] reading housekeeping
[Status 05:55:55 INFO] acquire complete
[Status 05:55:55 INFO] writing housekeeping
[Sequencer 05:55:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:55:55 INFO] incremented V scene to 110 completed views
[Sequencer 05:55:55 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:55:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:55:55 INFO] incremented to [AERI set: name W110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:55:55 INFO] V110.SIG(18)
[sigmove 05:55:55 DEBUG] transformed V110Ma.SPC -> V110MA.SPC
[sigmove 05:55:55 DEBUG] transformed V110Mb.SPC -> V110MB.SPC
[sigmove 05:55:55 DEBUG] transformed V110Mc.SPC -> V110MC.SPC
[sigmove 05:55:55 DEBUG] transformed V110Md.SPC -> V110MD.SPC
[sigmove 05:55:55 DEBUG] transformed V110Me.SPC -> V110ME.SPC
[sigmove 05:55:55 DEBUG] transformed V110Mf.SPC -> V110MF.SPC
[Status 05:55:55 INFO] data for V110 transferred to science data processing
[Tidy 05:55:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:55:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:55:55 INFO] resetting WatchDogTimer
[Status 05:55:55 INFO] Starting Set [AERI set: name W110, 6 scans, 0 angle, D16300 command]
[Ingest 05:55:55 INFO] Sending XML status message
[Status 05:55:55 INFO] Mirror angle: 0
[Mirror 05:55:55 INFO] rotating to position W
[Status 05:55:56 INFO] .SET file for ACQ96 ready
[Ingest 05:55:56 INFO] Starting acquisition
[Status 05:55:56 INFO] reading housekeeping
[Status 05:56:14 INFO] acquire complete
[Status 05:56:14 INFO] writing housekeeping
[Sequencer 05:56:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:56:14 INFO] incremented W scene to 110 completed views
[Sequencer 05:56:14 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:56:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:56:14 INFO] incremented to [AERI set: name X110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:56:14 INFO] W110.SIG(18)
[sigmove 05:56:14 DEBUG] transformed W110Ma.SPC -> W110MA.SPC
[sigmove 05:56:14 DEBUG] transformed W110Mb.SPC -> W110MB.SPC
[sigmove 05:56:14 DEBUG] transformed W110Mc.SPC -> W110MC.SPC
[sigmove 05:56:14 DEBUG] transformed W110Md.SPC -> W110MD.SPC
[sigmove 05:56:14 DEBUG] transformed W110Me.SPC -> W110ME.SPC
[sigmove 05:56:14 DEBUG] transformed W110Mf.SPC -> W110MF.SPC
[Status 05:56:14 INFO] data for W110 transferred to science data processing
[Tidy 05:56:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:56:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:56:14 INFO] resetting WatchDogTimer
[Status 05:56:14 INFO] Starting Set [AERI set: name X110, 6 scans, 0 angle, D16300 command]
[Ingest 05:56:14 INFO] Sending XML status message
[Status 05:56:14 INFO] Mirror angle: 0
[Mirror 05:56:15 INFO] rotating to position X
[Status 05:56:15 INFO] .SET file for ACQ96 ready
[Ingest 05:56:15 INFO] Starting acquisition
[Status 05:56:15 INFO] reading housekeeping
[Status 05:56:33 INFO] acquire complete
[Status 05:56:33 INFO] writing housekeeping
[Sequencer 05:56:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:56:33 INFO] incremented X scene to 110 completed views
[Sequencer 05:56:33 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:56:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:56:33 INFO] incremented to [AERI set: name Y110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:56:33 INFO] X110.SIG(18)
[sigmove 05:56:33 DEBUG] transformed X110Ma.SPC -> X110MA.SPC
[sigmove 05:56:33 DEBUG] transformed X110Mb.SPC -> X110MB.SPC
[sigmove 05:56:33 DEBUG] transformed X110Mc.SPC -> X110MC.SPC
[sigmove 05:56:33 DEBUG] transformed X110Md.SPC -> X110MD.SPC
[sigmove 05:56:33 DEBUG] transformed X110Me.SPC -> X110ME.SPC
[sigmove 05:56:33 DEBUG] transformed X110Mf.SPC -> X110MF.SPC
[Status 05:56:33 INFO] data for X110 transferred to science data processing
[Tidy 05:56:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:56:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:56:33 INFO] resetting WatchDogTimer
[Status 05:56:34 INFO] Starting Set [AERI set: name Y110, 6 scans, 0 angle, D16300 command]
[Ingest 05:56:34 INFO] Sending XML status message
[Status 05:56:34 INFO] Mirror angle: 0
[Mirror 05:56:34 INFO] rotating to position Y
[Status 05:56:34 INFO] .SET file for ACQ96 ready
[Ingest 05:56:34 INFO] Starting acquisition
[Status 05:56:34 INFO] reading housekeeping
[Status 05:56:52 INFO] acquire complete
[Status 05:56:52 INFO] writing housekeeping
[Sequencer 05:56:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:56:52 INFO] incremented Y scene to 110 completed views
[Sequencer 05:56:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:56:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:56:52 INFO] incremented to [AERI set: name Z110, 6 scans, 0 angle, D16300 command] set
[sigmove 05:56:52 INFO] Y110.SIG(18)
[sigmove 05:56:52 DEBUG] transformed Y110Ma.SPC -> Y110MA.SPC
[sigmove 05:56:52 DEBUG] transformed Y110Mb.SPC -> Y110MB.SPC
[sigmove 05:56:52 DEBUG] transformed Y110Mc.SPC -> Y110MC.SPC
[sigmove 05:56:52 DEBUG] transformed Y110Md.SPC -> Y110MD.SPC
[sigmove 05:56:52 DEBUG] transformed Y110Me.SPC -> Y110ME.SPC
[sigmove 05:56:52 DEBUG] transformed Y110Mf.SPC -> Y110MF.SPC
[Status 05:56:52 INFO] data for Y110 transferred to science data processing
[Tidy 05:56:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:56:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:56:52 INFO] resetting WatchDogTimer
[Status 05:56:53 INFO] Starting Set [AERI set: name Z110, 6 scans, 0 angle, D16300 command]
[Ingest 05:56:53 INFO] Sending XML status message
[Status 05:56:53 INFO] Mirror angle: 0
[Mirror 05:56:53 INFO] rotating to position Z
[Status 05:56:53 INFO] .SET file for ACQ96 ready
[Ingest 05:56:53 INFO] Starting acquisition
[Status 05:56:53 INFO] reading housekeeping
[Status 05:57:11 INFO] acquire complete
[Status 05:57:12 INFO] writing housekeeping
[Sequencer 05:57:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:57:12 INFO] incremented Z scene to 110 completed views
[Sequencer 05:57:12 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 05:57:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:57:12 INFO] incremented to [AERI set: name H111, 6 scans, 60 angle, D22500 command] set
[sigmove 05:57:12 INFO] Z110.SIG(18)
[sigmove 05:57:12 DEBUG] transformed Z110Ma.SPC -> Z110MA.SPC
[sigmove 05:57:12 DEBUG] transformed Z110Mb.SPC -> Z110MB.SPC
[sigmove 05:57:12 DEBUG] transformed Z110Mc.SPC -> Z110MC.SPC
[sigmove 05:57:12 DEBUG] transformed Z110Md.SPC -> Z110MD.SPC
[sigmove 05:57:12 DEBUG] transformed Z110Me.SPC -> Z110ME.SPC
[sigmove 05:57:12 DEBUG] transformed Z110Mf.SPC -> Z110MF.SPC
[Status 05:57:12 INFO] data for Z110 transferred to science data processing
[Tidy 05:57:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:57:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:57:12 INFO] resetting WatchDogTimer
[Status 05:57:12 INFO] Starting Set [AERI set: name H111, 6 scans, 60 angle, D22500 command]
[Ingest 05:57:12 INFO] Sending XML status message
[Status 05:57:12 INFO] Mirror angle: 60
[Mirror 05:57:12 INFO] rotating to position H
[Status 05:57:13 INFO] .SET file for ACQ96 ready
[Ingest 05:57:13 INFO] Starting acquisition
[Status 05:57:13 INFO] reading housekeeping
[Status 05:57:31 INFO] acquire complete
[Status 05:57:32 INFO] writing housekeeping
[Sequencer 05:57:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:57:32 INFO] incremented H scene to 111 completed views
[Sequencer 05:57:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 05:57:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:57:32 INFO] incremented to [AERI set: name A111, 6 scans, 120 angle, D28300 command] set
[sigmove 05:57:32 INFO] H111.SIG(18)
[sigmove 05:57:32 DEBUG] transformed H111Ma.SPC -> H111MA.SPC
[sigmove 05:57:32 DEBUG] transformed H111Mb.SPC -> H111MB.SPC
[sigmove 05:57:32 DEBUG] transformed H111Mc.SPC -> H111MC.SPC
[sigmove 05:57:32 DEBUG] transformed H111Md.SPC -> H111MD.SPC
[sigmove 05:57:32 DEBUG] transformed H111Me.SPC -> H111ME.SPC
[sigmove 05:57:32 DEBUG] transformed H111Mf.SPC -> H111MF.SPC
[Status 05:57:32 INFO] data for H111 transferred to science data processing
[Tidy 05:57:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:57:32 INFO] A109.FIN(19),H109.FIN(19),S109.FIN(19),T109.FIN(19),U109.FIN(19),V109.FIN(19),W109.FIN(19),X109.FIN(19),Y109.FIN(19),Z109.FIN(19),A110.FIN(19),H110.FIN(19),S110.FIN(19),T110.FIN(19),U110.FIN(19),V110.FIN(19),W110.FIN(19),X110.FIN(19),Y110.FIN(19),Z110.FIN(19)
[sigmove 05:57:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:57:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 05:57:34 DEBUG] done zipping
[WatchDog 05:57:34 INFO] resetting WatchDogTimer
[Status 05:57:34 INFO] Starting Set [AERI set: name A111, 6 scans, 120 angle, D28300 command]
[Ingest 05:57:34 INFO] Sending XML status message
[Status 05:57:34 INFO] Mirror angle: 120
[Mirror 05:57:34 INFO] rotating to position A
[Status 05:57:35 INFO] .SET file for ACQ96 ready
[Ingest 05:57:35 INFO] Starting acquisition
[Status 05:57:35 INFO] reading housekeeping
[Status 05:57:54 INFO] acquire complete
[Status 05:57:54 INFO] writing housekeeping
[Sequencer 05:57:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:57:54 INFO] incremented A scene to 111 completed views
[Sequencer 05:57:54 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 05:57:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:57:54 INFO] incremented to [AERI set: name S111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:57:54 INFO] A111.SIG(18)
[sigmove 05:57:54 DEBUG] transformed A111Ma.SPC -> A111MA.SPC
[sigmove 05:57:54 DEBUG] transformed A111Mb.SPC -> A111MB.SPC
[sigmove 05:57:54 DEBUG] transformed A111Mc.SPC -> A111MC.SPC
[sigmove 05:57:54 DEBUG] transformed A111Md.SPC -> A111MD.SPC
[sigmove 05:57:54 DEBUG] transformed A111Me.SPC -> A111ME.SPC
[sigmove 05:57:54 DEBUG] transformed A111Mf.SPC -> A111MF.SPC
[Status 05:57:54 INFO] data for A111 transferred to science data processing
[Tidy 05:57:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:57:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:57:54 INFO] resetting WatchDogTimer
[Status 05:57:54 INFO] Starting Set [AERI set: name S111, 6 scans, 0 angle, D16300 command]
[Ingest 05:57:54 INFO] Sending XML status message
[Status 05:57:54 INFO] Mirror angle: 0
[Mirror 05:57:54 INFO] rotating to position S
[Status 05:57:56 INFO] .SET file for ACQ96 ready
[Ingest 05:57:56 INFO] Starting acquisition
[Status 05:57:56 INFO] reading housekeeping
[Status 05:58:14 INFO] acquire complete
[Status 05:58:14 INFO] writing housekeeping
[Sequencer 05:58:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:58:14 INFO] incremented S scene to 111 completed views
[Sequencer 05:58:14 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:58:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:58:14 INFO] incremented to [AERI set: name T111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:58:14 INFO] S111.SIG(18)
[sigmove 05:58:14 DEBUG] transformed S111Ma.SPC -> S111MA.SPC
[sigmove 05:58:14 DEBUG] transformed S111Mb.SPC -> S111MB.SPC
[sigmove 05:58:14 DEBUG] transformed S111Mc.SPC -> S111MC.SPC
[sigmove 05:58:14 DEBUG] transformed S111Md.SPC -> S111MD.SPC
[sigmove 05:58:14 DEBUG] transformed S111Me.SPC -> S111ME.SPC
[sigmove 05:58:14 DEBUG] transformed S111Mf.SPC -> S111MF.SPC
[Status 05:58:14 INFO] data for S111 transferred to science data processing
[Tidy 05:58:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:58:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:58:14 INFO] resetting WatchDogTimer
[Status 05:58:15 INFO] Starting Set [AERI set: name T111, 6 scans, 0 angle, D16300 command]
[Ingest 05:58:15 INFO] Sending XML status message
[Status 05:58:15 INFO] Mirror angle: 0
[Mirror 05:58:15 INFO] rotating to position T
[Status 05:58:15 INFO] .SET file for ACQ96 ready
[Ingest 05:58:15 INFO] Starting acquisition
[Status 05:58:15 INFO] reading housekeeping
[Status 05:58:33 INFO] acquire complete
[Status 05:58:33 INFO] writing housekeeping
[Sequencer 05:58:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:58:33 INFO] incremented T scene to 111 completed views
[Sequencer 05:58:33 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:58:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:58:33 INFO] incremented to [AERI set: name U111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:58:33 INFO] T111.SIG(18)
[sigmove 05:58:33 DEBUG] transformed T111Ma.SPC -> T111MA.SPC
[sigmove 05:58:33 DEBUG] transformed T111Mb.SPC -> T111MB.SPC
[sigmove 05:58:33 DEBUG] transformed T111Mc.SPC -> T111MC.SPC
[sigmove 05:58:33 DEBUG] transformed T111Md.SPC -> T111MD.SPC
[sigmove 05:58:33 DEBUG] transformed T111Me.SPC -> T111ME.SPC
[sigmove 05:58:33 DEBUG] transformed T111Mf.SPC -> T111MF.SPC
[Status 05:58:33 INFO] data for T111 transferred to science data processing
[Tidy 05:58:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:58:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:58:33 INFO] resetting WatchDogTimer
[Status 05:58:34 INFO] Starting Set [AERI set: name U111, 6 scans, 0 angle, D16300 command]
[Ingest 05:58:34 INFO] Sending XML status message
[Status 05:58:34 INFO] Mirror angle: 0
[Mirror 05:58:34 INFO] rotating to position U
[Status 05:58:34 INFO] .SET file for ACQ96 ready
[Ingest 05:58:34 INFO] Starting acquisition
[Status 05:58:34 INFO] reading housekeeping
[Status 05:58:52 INFO] acquire complete
[Status 05:58:53 INFO] writing housekeeping
[Sequencer 05:58:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:58:53 INFO] incremented U scene to 111 completed views
[Sequencer 05:58:53 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:58:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:58:53 INFO] incremented to [AERI set: name V111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:58:53 INFO] U111.SIG(18)
[sigmove 05:58:53 DEBUG] transformed U111Ma.SPC -> U111MA.SPC
[sigmove 05:58:53 DEBUG] transformed U111Mb.SPC -> U111MB.SPC
[sigmove 05:58:53 DEBUG] transformed U111Mc.SPC -> U111MC.SPC
[sigmove 05:58:53 DEBUG] transformed U111Md.SPC -> U111MD.SPC
[sigmove 05:58:53 DEBUG] transformed U111Me.SPC -> U111ME.SPC
[sigmove 05:58:53 DEBUG] transformed U111Mf.SPC -> U111MF.SPC
[Status 05:58:53 INFO] data for U111 transferred to science data processing
[Tidy 05:58:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:58:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:58:53 INFO] resetting WatchDogTimer
[Status 05:58:53 INFO] Starting Set [AERI set: name V111, 6 scans, 0 angle, D16300 command]
[Ingest 05:58:53 INFO] Sending XML status message
[Status 05:58:53 INFO] Mirror angle: 0
[Mirror 05:58:53 INFO] rotating to position V
[Status 05:58:53 INFO] .SET file for ACQ96 ready
[Ingest 05:58:53 INFO] Starting acquisition
[Status 05:58:53 INFO] reading housekeeping
[Status 05:59:11 INFO] acquire complete
[Status 05:59:12 INFO] writing housekeeping
[Sequencer 05:59:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:59:12 INFO] incremented V scene to 111 completed views
[Sequencer 05:59:12 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:59:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:59:12 INFO] incremented to [AERI set: name W111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:59:12 INFO] V111.SIG(18)
[sigmove 05:59:12 DEBUG] transformed V111Ma.SPC -> V111MA.SPC
[sigmove 05:59:12 DEBUG] transformed V111Mb.SPC -> V111MB.SPC
[sigmove 05:59:12 DEBUG] transformed V111Mc.SPC -> V111MC.SPC
[sigmove 05:59:12 DEBUG] transformed V111Md.SPC -> V111MD.SPC
[sigmove 05:59:12 DEBUG] transformed V111Me.SPC -> V111ME.SPC
[sigmove 05:59:12 DEBUG] transformed V111Mf.SPC -> V111MF.SPC
[Status 05:59:12 INFO] data for V111 transferred to science data processing
[Tidy 05:59:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:59:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:59:12 INFO] resetting WatchDogTimer
[Status 05:59:12 INFO] Starting Set [AERI set: name W111, 6 scans, 0 angle, D16300 command]
[Ingest 05:59:12 INFO] Sending XML status message
[Status 05:59:12 INFO] Mirror angle: 0
[Mirror 05:59:12 INFO] rotating to position W
[Status 05:59:12 INFO] .SET file for ACQ96 ready
[Ingest 05:59:12 INFO] Starting acquisition
[Status 05:59:12 INFO] reading housekeeping
[Status 05:59:30 INFO] acquire complete
[Status 05:59:31 INFO] writing housekeeping
[Sequencer 05:59:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:59:31 INFO] incremented W scene to 111 completed views
[Sequencer 05:59:31 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:59:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:59:31 INFO] incremented to [AERI set: name X111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:59:31 INFO] W111.SIG(18)
[sigmove 05:59:31 DEBUG] transformed W111Ma.SPC -> W111MA.SPC
[sigmove 05:59:31 DEBUG] transformed W111Mb.SPC -> W111MB.SPC
[sigmove 05:59:31 DEBUG] transformed W111Mc.SPC -> W111MC.SPC
[sigmove 05:59:31 DEBUG] transformed W111Md.SPC -> W111MD.SPC
[sigmove 05:59:31 DEBUG] transformed W111Me.SPC -> W111ME.SPC
[sigmove 05:59:31 DEBUG] transformed W111Mf.SPC -> W111MF.SPC
[Status 05:59:31 INFO] data for W111 transferred to science data processing
[Tidy 05:59:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:59:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:59:31 INFO] resetting WatchDogTimer
[Status 05:59:31 INFO] Starting Set [AERI set: name X111, 6 scans, 0 angle, D16300 command]
[Ingest 05:59:31 INFO] Sending XML status message
[Status 05:59:31 INFO] Mirror angle: 0
[Mirror 05:59:31 INFO] rotating to position X
[Status 05:59:31 INFO] .SET file for ACQ96 ready
[Ingest 05:59:31 INFO] Starting acquisition
[Status 05:59:32 INFO] reading housekeeping
[Status 05:59:49 INFO] acquire complete
[Status 05:59:50 INFO] writing housekeeping
[Sequencer 05:59:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 05:59:50 INFO] incremented X scene to 111 completed views
[Sequencer 05:59:50 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 05:59:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 05:59:50 INFO] incremented to [AERI set: name Y111, 6 scans, 0 angle, D16300 command] set
[sigmove 05:59:50 INFO] X111.SIG(18)
[sigmove 05:59:50 DEBUG] transformed X111Ma.SPC -> X111MA.SPC
[sigmove 05:59:50 DEBUG] transformed X111Mb.SPC -> X111MB.SPC
[sigmove 05:59:50 DEBUG] transformed X111Mc.SPC -> X111MC.SPC
[sigmove 05:59:50 DEBUG] transformed X111Md.SPC -> X111MD.SPC
[sigmove 05:59:50 DEBUG] transformed X111Me.SPC -> X111ME.SPC
[sigmove 05:59:50 DEBUG] transformed X111Mf.SPC -> X111MF.SPC
[Status 05:59:50 INFO] data for X111 transferred to science data processing
[Tidy 05:59:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 05:59:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 05:59:50 INFO] resetting WatchDogTimer
[Status 05:59:50 INFO] Starting Set [AERI set: name Y111, 6 scans, 0 angle, D16300 command]
[Ingest 05:59:50 INFO] Sending XML status message
[Status 05:59:50 INFO] Mirror angle: 0
[Mirror 05:59:50 INFO] rotating to position Y
[Status 05:59:50 INFO] .SET file for ACQ96 ready
[Ingest 05:59:51 INFO] Starting acquisition
[Status 05:59:51 INFO] reading housekeeping
[Status 06:00:08 INFO] acquire complete
[Status 06:00:09 INFO] writing housekeeping
[Sequencer 06:00:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:00:09 INFO] incremented Y scene to 111 completed views
[Sequencer 06:00:09 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:00:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:00:09 INFO] incremented to [AERI set: name Z111, 6 scans, 0 angle, D16300 command] set
[sigmove 06:00:09 INFO] Y111.SIG(18)
[sigmove 06:00:09 DEBUG] transformed Y111Ma.SPC -> Y111MA.SPC
[sigmove 06:00:09 DEBUG] transformed Y111Mb.SPC -> Y111MB.SPC
[sigmove 06:00:09 DEBUG] transformed Y111Mc.SPC -> Y111MC.SPC
[sigmove 06:00:09 DEBUG] transformed Y111Md.SPC -> Y111MD.SPC
[sigmove 06:00:09 DEBUG] transformed Y111Me.SPC -> Y111ME.SPC
[sigmove 06:00:09 DEBUG] transformed Y111Mf.SPC -> Y111MF.SPC
[Status 06:00:09 INFO] data for Y111 transferred to science data processing
[Tidy 06:00:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:00:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:00:09 INFO] resetting WatchDogTimer
[Status 06:00:09 INFO] Starting Set [AERI set: name Z111, 6 scans, 0 angle, D16300 command]
[Ingest 06:00:09 INFO] Sending XML status message
[Status 06:00:09 INFO] Mirror angle: 0
[Mirror 06:00:09 INFO] rotating to position Z
[Status 06:00:09 INFO] .SET file for ACQ96 ready
[Ingest 06:00:10 INFO] Starting acquisition
[Status 06:00:10 INFO] reading housekeeping
[Status 06:00:27 INFO] acquire complete
[Status 06:00:28 INFO] writing housekeeping
[Sequencer 06:00:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:00:28 INFO] incremented Z scene to 111 completed views
[Sequencer 06:00:28 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:00:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:00:28 INFO] incremented to [AERI set: name A112, 6 scans, 120 angle, D28300 command] set
[sigmove 06:00:28 INFO] Z111.SIG(18)
[sigmove 06:00:28 DEBUG] transformed Z111Ma.SPC -> Z111MA.SPC
[sigmove 06:00:28 DEBUG] transformed Z111Mb.SPC -> Z111MB.SPC
[sigmove 06:00:28 DEBUG] transformed Z111Mc.SPC -> Z111MC.SPC
[sigmove 06:00:28 DEBUG] transformed Z111Md.SPC -> Z111MD.SPC
[sigmove 06:00:28 DEBUG] transformed Z111Me.SPC -> Z111ME.SPC
[sigmove 06:00:28 DEBUG] transformed Z111Mf.SPC -> Z111MF.SPC
[Status 06:00:28 INFO] data for Z111 transferred to science data processing
[Tidy 06:00:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:00:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:00:28 INFO] resetting WatchDogTimer
[Status 06:00:28 INFO] Starting Set [AERI set: name A112, 6 scans, 120 angle, D28300 command]
[Ingest 06:00:28 INFO] Sending XML status message
[Status 06:00:28 INFO] Mirror angle: 120
[Mirror 06:00:28 INFO] rotating to position A
[Status 06:00:30 INFO] .SET file for ACQ96 ready
[Ingest 06:00:30 INFO] Starting acquisition
[Status 06:00:30 INFO] reading housekeeping
[Status 06:00:48 INFO] acquire complete
[Status 06:00:48 INFO] writing housekeeping
[Sequencer 06:00:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:00:48 INFO] incremented A scene to 112 completed views
[Sequencer 06:00:48 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:00:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:00:48 INFO] incremented to [AERI set: name H112, 6 scans, 60 angle, D22500 command] set
[sigmove 06:00:48 INFO] A112.SIG(18)
[sigmove 06:00:48 DEBUG] transformed A112Ma.SPC -> A112MA.SPC
[sigmove 06:00:48 DEBUG] transformed A112Mb.SPC -> A112MB.SPC
[sigmove 06:00:48 DEBUG] transformed A112Mc.SPC -> A112MC.SPC
[sigmove 06:00:48 DEBUG] transformed A112Md.SPC -> A112MD.SPC
[sigmove 06:00:48 DEBUG] transformed A112Me.SPC -> A112ME.SPC
[sigmove 06:00:48 DEBUG] transformed A112Mf.SPC -> A112MF.SPC
[Status 06:00:48 INFO] data for A112 transferred to science data processing
[Tidy 06:00:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:00:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:00:48 INFO] resetting WatchDogTimer
[Status 06:00:48 INFO] Starting Set [AERI set: name H112, 6 scans, 60 angle, D22500 command]
[Ingest 06:00:48 INFO] Sending XML status message
[Status 06:00:48 INFO] Mirror angle: 60
[Mirror 06:00:49 INFO] rotating to position H
[Status 06:00:49 INFO] .SET file for ACQ96 ready
[Ingest 06:00:49 INFO] Starting acquisition
[Status 06:00:50 INFO] reading housekeeping
[Status 06:01:08 INFO] acquire complete
[Status 06:01:08 INFO] writing housekeeping
[Sequencer 06:01:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:01:08 INFO] incremented H scene to 112 completed views
[Sequencer 06:01:08 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:01:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:01:08 INFO] incremented to [AERI set: name S112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:01:08 INFO] H112.SIG(18)
[sigmove 06:01:08 DEBUG] transformed H112Ma.SPC -> H112MA.SPC
[sigmove 06:01:08 DEBUG] transformed H112Mb.SPC -> H112MB.SPC
[sigmove 06:01:08 DEBUG] transformed H112Mc.SPC -> H112MC.SPC
[sigmove 06:01:08 DEBUG] transformed H112Md.SPC -> H112MD.SPC
[sigmove 06:01:08 DEBUG] transformed H112Me.SPC -> H112ME.SPC
[sigmove 06:01:08 DEBUG] transformed H112Mf.SPC -> H112MF.SPC
[Status 06:01:08 INFO] data for H112 transferred to science data processing
[Tidy 06:01:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:01:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:01:08 INFO] resetting WatchDogTimer
[Status 06:01:09 INFO] Starting Set [AERI set: name S112, 6 scans, 0 angle, D16300 command]
[Ingest 06:01:09 INFO] Sending XML status message
[Status 06:01:09 INFO] Mirror angle: 0
[Mirror 06:01:09 INFO] rotating to position S
[Status 06:01:10 INFO] .SET file for ACQ96 ready
[Ingest 06:01:10 INFO] Starting acquisition
[Status 06:01:10 INFO] reading housekeeping
[Status 06:01:28 INFO] acquire complete
[Status 06:01:29 INFO] writing housekeeping
[Sequencer 06:01:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:01:29 INFO] incremented S scene to 112 completed views
[Sequencer 06:01:29 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:01:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:01:29 INFO] incremented to [AERI set: name T112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:01:29 INFO] S112.SIG(18)
[sigmove 06:01:29 DEBUG] transformed S112Ma.SPC -> S112MA.SPC
[sigmove 06:01:29 DEBUG] transformed S112Mb.SPC -> S112MB.SPC
[sigmove 06:01:29 DEBUG] transformed S112Mc.SPC -> S112MC.SPC
[sigmove 06:01:29 DEBUG] transformed S112Md.SPC -> S112MD.SPC
[sigmove 06:01:29 DEBUG] transformed S112Me.SPC -> S112ME.SPC
[sigmove 06:01:29 DEBUG] transformed S112Mf.SPC -> S112MF.SPC
[Status 06:01:29 INFO] data for S112 transferred to science data processing
[Tidy 06:01:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:01:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:01:29 INFO] resetting WatchDogTimer
[Status 06:01:29 INFO] Starting Set [AERI set: name T112, 6 scans, 0 angle, D16300 command]
[Ingest 06:01:29 INFO] Sending XML status message
[Status 06:01:29 INFO] Mirror angle: 0
[Mirror 06:01:29 INFO] rotating to position T
[Status 06:01:29 INFO] .SET file for ACQ96 ready
[Ingest 06:01:30 INFO] Starting acquisition
[Status 06:01:30 INFO] reading housekeeping
[Status 06:01:47 INFO] acquire complete
[Status 06:01:48 INFO] writing housekeeping
[Sequencer 06:01:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:01:48 INFO] incremented T scene to 112 completed views
[Sequencer 06:01:48 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:01:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:01:48 INFO] incremented to [AERI set: name U112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:01:48 INFO] T112.SIG(18)
[sigmove 06:01:48 DEBUG] transformed T112Ma.SPC -> T112MA.SPC
[sigmove 06:01:48 DEBUG] transformed T112Mb.SPC -> T112MB.SPC
[sigmove 06:01:48 DEBUG] transformed T112Mc.SPC -> T112MC.SPC
[sigmove 06:01:48 DEBUG] transformed T112Md.SPC -> T112MD.SPC
[sigmove 06:01:48 DEBUG] transformed T112Me.SPC -> T112ME.SPC
[sigmove 06:01:48 DEBUG] transformed T112Mf.SPC -> T112MF.SPC
[Status 06:01:48 INFO] data for T112 transferred to science data processing
[Tidy 06:01:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:01:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:01:48 INFO] resetting WatchDogTimer
[Status 06:01:48 INFO] Starting Set [AERI set: name U112, 6 scans, 0 angle, D16300 command]
[Ingest 06:01:48 INFO] Sending XML status message
[Status 06:01:48 INFO] Mirror angle: 0
[Mirror 06:01:48 INFO] rotating to position U
[Status 06:01:48 INFO] .SET file for ACQ96 ready
[Ingest 06:01:48 INFO] Starting acquisition
[Status 06:01:49 INFO] reading housekeeping
[Status 06:02:06 INFO] acquire complete
[Status 06:02:07 INFO] writing housekeeping
[Sequencer 06:02:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:02:07 INFO] incremented U scene to 112 completed views
[Sequencer 06:02:07 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:02:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:02:07 INFO] incremented to [AERI set: name V112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:02:07 INFO] U112.SIG(18)
[sigmove 06:02:07 DEBUG] transformed U112Ma.SPC -> U112MA.SPC
[sigmove 06:02:07 DEBUG] transformed U112Mb.SPC -> U112MB.SPC
[sigmove 06:02:07 DEBUG] transformed U112Mc.SPC -> U112MC.SPC
[sigmove 06:02:07 DEBUG] transformed U112Md.SPC -> U112MD.SPC
[sigmove 06:02:07 DEBUG] transformed U112Me.SPC -> U112ME.SPC
[sigmove 06:02:07 DEBUG] transformed U112Mf.SPC -> U112MF.SPC
[Status 06:02:07 INFO] data for U112 transferred to science data processing
[Tidy 06:02:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:02:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:02:07 INFO] resetting WatchDogTimer
[Status 06:02:07 INFO] Starting Set [AERI set: name V112, 6 scans, 0 angle, D16300 command]
[Ingest 06:02:07 INFO] Sending XML status message
[Status 06:02:07 INFO] Mirror angle: 0
[Mirror 06:02:07 INFO] rotating to position V
[Status 06:02:07 INFO] .SET file for ACQ96 ready
[Ingest 06:02:07 INFO] Starting acquisition
[Status 06:02:08 INFO] reading housekeeping
[Status 06:02:25 INFO] acquire complete
[Status 06:02:26 INFO] writing housekeeping
[Sequencer 06:02:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:02:26 INFO] incremented V scene to 112 completed views
[Sequencer 06:02:26 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:02:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:02:26 INFO] incremented to [AERI set: name W112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:02:26 INFO] V112.SIG(18)
[sigmove 06:02:26 DEBUG] transformed V112Ma.SPC -> V112MA.SPC
[sigmove 06:02:26 DEBUG] transformed V112Mb.SPC -> V112MB.SPC
[sigmove 06:02:26 DEBUG] transformed V112Mc.SPC -> V112MC.SPC
[sigmove 06:02:26 DEBUG] transformed V112Md.SPC -> V112MD.SPC
[sigmove 06:02:26 DEBUG] transformed V112Me.SPC -> V112ME.SPC
[sigmove 06:02:26 DEBUG] transformed V112Mf.SPC -> V112MF.SPC
[Status 06:02:26 INFO] data for V112 transferred to science data processing
[Tidy 06:02:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:02:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:02:26 INFO] resetting WatchDogTimer
[Status 06:02:26 INFO] Starting Set [AERI set: name W112, 6 scans, 0 angle, D16300 command]
[Ingest 06:02:26 INFO] Sending XML status message
[Status 06:02:26 INFO] Mirror angle: 0
[Mirror 06:02:26 INFO] rotating to position W
[Status 06:02:26 INFO] .SET file for ACQ96 ready
[Ingest 06:02:27 INFO] Starting acquisition
[Status 06:02:27 INFO] reading housekeeping
[Status 06:02:44 INFO] acquire complete
[Status 06:02:45 INFO] writing housekeeping
[Sequencer 06:02:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:02:45 INFO] incremented W scene to 112 completed views
[Sequencer 06:02:45 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:02:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:02:45 INFO] incremented to [AERI set: name X112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:02:45 INFO] W112.SIG(18)
[sigmove 06:02:45 DEBUG] transformed W112Ma.SPC -> W112MA.SPC
[sigmove 06:02:45 DEBUG] transformed W112Mb.SPC -> W112MB.SPC
[sigmove 06:02:45 DEBUG] transformed W112Mc.SPC -> W112MC.SPC
[sigmove 06:02:45 DEBUG] transformed W112Md.SPC -> W112MD.SPC
[sigmove 06:02:45 DEBUG] transformed W112Me.SPC -> W112ME.SPC
[sigmove 06:02:45 DEBUG] transformed W112Mf.SPC -> W112MF.SPC
[Status 06:02:45 INFO] data for W112 transferred to science data processing
[Tidy 06:02:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:02:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:02:45 INFO] resetting WatchDogTimer
[Status 06:02:45 INFO] Starting Set [AERI set: name X112, 6 scans, 0 angle, D16300 command]
[Ingest 06:02:45 INFO] Sending XML status message
[Status 06:02:45 INFO] Mirror angle: 0
[Mirror 06:02:45 INFO] rotating to position X
[Status 06:02:46 INFO] .SET file for ACQ96 ready
[Ingest 06:02:46 INFO] Starting acquisition
[Status 06:02:46 INFO] reading housekeeping
[Status 06:03:04 INFO] acquire complete
[Status 06:03:04 INFO] writing housekeeping
[Sequencer 06:03:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:03:04 INFO] incremented X scene to 112 completed views
[Sequencer 06:03:04 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:03:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:03:04 INFO] incremented to [AERI set: name Y112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:03:04 INFO] X112.SIG(18)
[sigmove 06:03:04 DEBUG] transformed X112Ma.SPC -> X112MA.SPC
[sigmove 06:03:04 DEBUG] transformed X112Mb.SPC -> X112MB.SPC
[sigmove 06:03:04 DEBUG] transformed X112Mc.SPC -> X112MC.SPC
[sigmove 06:03:04 DEBUG] transformed X112Md.SPC -> X112MD.SPC
[sigmove 06:03:04 DEBUG] transformed X112Me.SPC -> X112ME.SPC
[sigmove 06:03:04 DEBUG] transformed X112Mf.SPC -> X112MF.SPC
[Status 06:03:04 INFO] data for X112 transferred to science data processing
[Tidy 06:03:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:03:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:03:04 INFO] resetting WatchDogTimer
[Status 06:03:04 INFO] Starting Set [AERI set: name Y112, 6 scans, 0 angle, D16300 command]
[Ingest 06:03:04 INFO] Sending XML status message
[Status 06:03:04 INFO] Mirror angle: 0
[Mirror 06:03:04 INFO] rotating to position Y
[Status 06:03:05 INFO] .SET file for ACQ96 ready
[Ingest 06:03:05 INFO] Starting acquisition
[Status 06:03:05 INFO] reading housekeeping
[Status 06:03:23 INFO] acquire complete
[Status 06:03:23 INFO] writing housekeeping
[Sequencer 06:03:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:03:23 INFO] incremented Y scene to 112 completed views
[Sequencer 06:03:23 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:03:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:03:23 INFO] incremented to [AERI set: name Z112, 6 scans, 0 angle, D16300 command] set
[sigmove 06:03:23 INFO] Y112.SIG(18)
[sigmove 06:03:23 DEBUG] transformed Y112Ma.SPC -> Y112MA.SPC
[sigmove 06:03:23 DEBUG] transformed Y112Mb.SPC -> Y112MB.SPC
[sigmove 06:03:23 DEBUG] transformed Y112Mc.SPC -> Y112MC.SPC
[sigmove 06:03:23 DEBUG] transformed Y112Md.SPC -> Y112MD.SPC
[sigmove 06:03:23 DEBUG] transformed Y112Me.SPC -> Y112ME.SPC
[sigmove 06:03:23 DEBUG] transformed Y112Mf.SPC -> Y112MF.SPC
[Status 06:03:23 INFO] data for Y112 transferred to science data processing
[Tidy 06:03:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:03:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:03:23 INFO] resetting WatchDogTimer
[Status 06:03:23 INFO] Starting Set [AERI set: name Z112, 6 scans, 0 angle, D16300 command]
[Ingest 06:03:23 INFO] Sending XML status message
[Status 06:03:23 INFO] Mirror angle: 0
[Mirror 06:03:23 INFO] rotating to position Z
[Status 06:03:24 INFO] .SET file for ACQ96 ready
[Ingest 06:03:24 INFO] Starting acquisition
[Status 06:03:24 INFO] reading housekeeping
[Status 06:03:42 INFO] acquire complete
[Status 06:03:42 INFO] writing housekeeping
[Sequencer 06:03:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:03:42 INFO] incremented Z scene to 112 completed views
[Sequencer 06:03:42 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:03:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:03:42 INFO] incremented to [AERI set: name H113, 6 scans, 60 angle, D22500 command] set
[sigmove 06:03:42 INFO] Z112.SIG(18)
[sigmove 06:03:42 DEBUG] transformed Z112Ma.SPC -> Z112MA.SPC
[sigmove 06:03:42 DEBUG] transformed Z112Mb.SPC -> Z112MB.SPC
[sigmove 06:03:42 DEBUG] transformed Z112Mc.SPC -> Z112MC.SPC
[sigmove 06:03:42 DEBUG] transformed Z112Md.SPC -> Z112MD.SPC
[sigmove 06:03:42 DEBUG] transformed Z112Me.SPC -> Z112ME.SPC
[sigmove 06:03:42 DEBUG] transformed Z112Mf.SPC -> Z112MF.SPC
[Status 06:03:42 INFO] data for Z112 transferred to science data processing
[Tidy 06:03:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:03:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:03:42 INFO] resetting WatchDogTimer
[Status 06:03:42 INFO] Starting Set [AERI set: name H113, 6 scans, 60 angle, D22500 command]
[Ingest 06:03:42 INFO] Sending XML status message
[Status 06:03:42 INFO] Mirror angle: 60
[Mirror 06:03:43 INFO] rotating to position H
[Status 06:03:43 INFO] .SET file for ACQ96 ready
[Ingest 06:03:43 INFO] Starting acquisition
[Status 06:03:44 INFO] reading housekeeping
[Status 06:04:02 INFO] acquire complete
[Status 06:04:02 INFO] writing housekeeping
[Sequencer 06:04:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:04:02 INFO] incremented H scene to 113 completed views
[Sequencer 06:04:02 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:04:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:04:02 INFO] incremented to [AERI set: name A113, 6 scans, 120 angle, D28300 command] set
[sigmove 06:04:02 INFO] H113.SIG(18)
[sigmove 06:04:02 DEBUG] transformed H113Ma.SPC -> H113MA.SPC
[sigmove 06:04:02 DEBUG] transformed H113Mb.SPC -> H113MB.SPC
[sigmove 06:04:02 DEBUG] transformed H113Mc.SPC -> H113MC.SPC
[sigmove 06:04:02 DEBUG] transformed H113Md.SPC -> H113MD.SPC
[sigmove 06:04:02 DEBUG] transformed H113Me.SPC -> H113ME.SPC
[sigmove 06:04:02 DEBUG] transformed H113Mf.SPC -> H113MF.SPC
[Status 06:04:02 INFO] data for H113 transferred to science data processing
[Tidy 06:04:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:04:02 INFO] A111.FIN(19),H111.FIN(19),S111.FIN(19),T111.FIN(19),U111.FIN(19),V111.FIN(19),W111.FIN(19),X111.FIN(19),Y111.FIN(19),Z111.FIN(19),A112.FIN(19),H112.FIN(19),S112.FIN(19),T112.FIN(19),U112.FIN(19),V112.FIN(19),W112.FIN(19),X112.FIN(19),Y112.FIN(19),Z112.FIN(19)
[sigmove 06:04:02 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:04:02 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:04:05 DEBUG] done zipping
[WatchDog 06:04:05 INFO] resetting WatchDogTimer
[Status 06:04:05 INFO] Starting Set [AERI set: name A113, 6 scans, 120 angle, D28300 command]
[Ingest 06:04:05 INFO] Sending XML status message
[Status 06:04:05 INFO] Mirror angle: 120
[Mirror 06:04:05 INFO] rotating to position A
[Status 06:04:06 INFO] .SET file for ACQ96 ready
[Ingest 06:04:06 INFO] Starting acquisition
[Status 06:04:06 INFO] reading housekeeping
[Status 06:04:24 INFO] acquire complete
[Status 06:04:25 INFO] writing housekeeping
[Sequencer 06:04:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:04:25 INFO] incremented A scene to 113 completed views
[Sequencer 06:04:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:04:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:04:25 INFO] incremented to [AERI set: name S113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:04:25 INFO] A113.SIG(18)
[sigmove 06:04:25 DEBUG] transformed A113Ma.SPC -> A113MA.SPC
[sigmove 06:04:25 DEBUG] transformed A113Mb.SPC -> A113MB.SPC
[sigmove 06:04:25 DEBUG] transformed A113Mc.SPC -> A113MC.SPC
[sigmove 06:04:25 DEBUG] transformed A113Md.SPC -> A113MD.SPC
[sigmove 06:04:25 DEBUG] transformed A113Me.SPC -> A113ME.SPC
[sigmove 06:04:25 DEBUG] transformed A113Mf.SPC -> A113MF.SPC
[Status 06:04:25 INFO] data for A113 transferred to science data processing
[Tidy 06:04:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:04:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:04:25 INFO] resetting WatchDogTimer
[Status 06:04:25 INFO] Starting Set [AERI set: name S113, 6 scans, 0 angle, D16300 command]
[Ingest 06:04:25 INFO] Sending XML status message
[Status 06:04:25 INFO] Mirror angle: 0
[Mirror 06:04:25 INFO] rotating to position S
[Status 06:04:26 INFO] .SET file for ACQ96 ready
[Ingest 06:04:27 INFO] Starting acquisition
[Status 06:04:27 INFO] reading housekeeping
[Status 06:04:45 INFO] acquire complete
[Status 06:04:45 INFO] writing housekeeping
[Sequencer 06:04:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:04:45 INFO] incremented S scene to 113 completed views
[Sequencer 06:04:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:04:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:04:45 INFO] incremented to [AERI set: name T113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:04:45 INFO] S113.SIG(18)
[sigmove 06:04:45 DEBUG] transformed S113Ma.SPC -> S113MA.SPC
[sigmove 06:04:45 DEBUG] transformed S113Mb.SPC -> S113MB.SPC
[sigmove 06:04:45 DEBUG] transformed S113Mc.SPC -> S113MC.SPC
[sigmove 06:04:45 DEBUG] transformed S113Md.SPC -> S113MD.SPC
[sigmove 06:04:45 DEBUG] transformed S113Me.SPC -> S113ME.SPC
[sigmove 06:04:45 DEBUG] transformed S113Mf.SPC -> S113MF.SPC
[Status 06:04:45 INFO] data for S113 transferred to science data processing
[Tidy 06:04:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:04:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:04:45 INFO] resetting WatchDogTimer
[Status 06:04:45 INFO] Starting Set [AERI set: name T113, 6 scans, 0 angle, D16300 command]
[Ingest 06:04:45 INFO] Sending XML status message
[Status 06:04:45 INFO] Mirror angle: 0
[Mirror 06:04:45 INFO] rotating to position T
[Status 06:04:46 INFO] .SET file for ACQ96 ready
[Ingest 06:04:46 INFO] Starting acquisition
[Status 06:04:46 INFO] reading housekeeping
[Status 06:05:04 INFO] acquire complete
[Status 06:05:04 INFO] writing housekeeping
[Sequencer 06:05:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:05:04 INFO] incremented T scene to 113 completed views
[Sequencer 06:05:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:05:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:05:04 INFO] incremented to [AERI set: name U113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:05:04 INFO] T113.SIG(18)
[sigmove 06:05:04 DEBUG] transformed T113Ma.SPC -> T113MA.SPC
[sigmove 06:05:04 DEBUG] transformed T113Mb.SPC -> T113MB.SPC
[sigmove 06:05:04 DEBUG] transformed T113Mc.SPC -> T113MC.SPC
[sigmove 06:05:04 DEBUG] transformed T113Md.SPC -> T113MD.SPC
[sigmove 06:05:04 DEBUG] transformed T113Me.SPC -> T113ME.SPC
[sigmove 06:05:04 DEBUG] transformed T113Mf.SPC -> T113MF.SPC
[Status 06:05:04 INFO] data for T113 transferred to science data processing
[Tidy 06:05:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:05:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:05:04 INFO] resetting WatchDogTimer
[Status 06:05:04 INFO] Starting Set [AERI set: name U113, 6 scans, 0 angle, D16300 command]
[Ingest 06:05:04 INFO] Sending XML status message
[Status 06:05:04 INFO] Mirror angle: 0
[Mirror 06:05:04 INFO] rotating to position U
[Status 06:05:05 INFO] .SET file for ACQ96 ready
[Ingest 06:05:05 INFO] Starting acquisition
[Status 06:05:05 INFO] reading housekeeping
[Status 06:05:23 INFO] acquire complete
[Status 06:05:23 INFO] writing housekeeping
[Sequencer 06:05:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:05:23 INFO] incremented U scene to 113 completed views
[Sequencer 06:05:23 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:05:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:05:23 INFO] incremented to [AERI set: name V113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:05:23 INFO] U113.SIG(18)
[sigmove 06:05:23 DEBUG] transformed U113Ma.SPC -> U113MA.SPC
[sigmove 06:05:23 DEBUG] transformed U113Mb.SPC -> U113MB.SPC
[sigmove 06:05:23 DEBUG] transformed U113Mc.SPC -> U113MC.SPC
[sigmove 06:05:23 DEBUG] transformed U113Md.SPC -> U113MD.SPC
[sigmove 06:05:23 DEBUG] transformed U113Me.SPC -> U113ME.SPC
[sigmove 06:05:23 DEBUG] transformed U113Mf.SPC -> U113MF.SPC
[Status 06:05:23 INFO] data for U113 transferred to science data processing
[Tidy 06:05:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:05:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:05:23 INFO] resetting WatchDogTimer
[Status 06:05:23 INFO] Starting Set [AERI set: name V113, 6 scans, 0 angle, D16300 command]
[Ingest 06:05:23 INFO] Sending XML status message
[Status 06:05:23 INFO] Mirror angle: 0
[Mirror 06:05:24 INFO] rotating to position V
[Status 06:05:24 INFO] .SET file for ACQ96 ready
[Ingest 06:05:24 INFO] Starting acquisition
[Status 06:05:24 INFO] reading housekeeping
[Status 06:05:42 INFO] acquire complete
[Status 06:05:42 INFO] writing housekeeping
[Sequencer 06:05:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:05:42 INFO] incremented V scene to 113 completed views
[Sequencer 06:05:42 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:05:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:05:42 INFO] incremented to [AERI set: name W113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:05:42 INFO] V113.SIG(18)
[sigmove 06:05:42 DEBUG] transformed V113Ma.SPC -> V113MA.SPC
[sigmove 06:05:42 DEBUG] transformed V113Mb.SPC -> V113MB.SPC
[sigmove 06:05:42 DEBUG] transformed V113Mc.SPC -> V113MC.SPC
[sigmove 06:05:42 DEBUG] transformed V113Md.SPC -> V113MD.SPC
[sigmove 06:05:42 DEBUG] transformed V113Me.SPC -> V113ME.SPC
[sigmove 06:05:42 DEBUG] transformed V113Mf.SPC -> V113MF.SPC
[Status 06:05:42 INFO] data for V113 transferred to science data processing
[Tidy 06:05:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:05:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:05:42 INFO] resetting WatchDogTimer
[Status 06:05:42 INFO] Starting Set [AERI set: name W113, 6 scans, 0 angle, D16300 command]
[Ingest 06:05:42 INFO] Sending XML status message
[Status 06:05:42 INFO] Mirror angle: 0
[Mirror 06:05:43 INFO] rotating to position W
[Status 06:05:43 INFO] .SET file for ACQ96 ready
[Ingest 06:05:43 INFO] Starting acquisition
[Status 06:05:43 INFO] reading housekeeping
[Status 06:06:01 INFO] acquire complete
[Status 06:06:01 INFO] writing housekeeping
[Sequencer 06:06:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:06:01 INFO] incremented W scene to 113 completed views
[Sequencer 06:06:01 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:06:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:06:01 INFO] incremented to [AERI set: name X113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:06:01 INFO] W113.SIG(18)
[sigmove 06:06:01 DEBUG] transformed W113Ma.SPC -> W113MA.SPC
[sigmove 06:06:01 DEBUG] transformed W113Mb.SPC -> W113MB.SPC
[sigmove 06:06:01 DEBUG] transformed W113Mc.SPC -> W113MC.SPC
[sigmove 06:06:01 DEBUG] transformed W113Md.SPC -> W113MD.SPC
[sigmove 06:06:01 DEBUG] transformed W113Me.SPC -> W113ME.SPC
[sigmove 06:06:01 DEBUG] transformed W113Mf.SPC -> W113MF.SPC
[Status 06:06:01 INFO] data for W113 transferred to science data processing
[Tidy 06:06:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:06:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:06:01 INFO] resetting WatchDogTimer
[Status 06:06:02 INFO] Starting Set [AERI set: name X113, 6 scans, 0 angle, D16300 command]
[Ingest 06:06:02 INFO] Sending XML status message
[Status 06:06:02 INFO] Mirror angle: 0
[Mirror 06:06:02 INFO] rotating to position X
[Status 06:06:02 INFO] .SET file for ACQ96 ready
[Ingest 06:06:02 INFO] Starting acquisition
[Status 06:06:02 INFO] reading housekeeping
[Status 06:06:20 INFO] acquire complete
[Status 06:06:20 INFO] writing housekeeping
[Sequencer 06:06:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:06:20 INFO] incremented X scene to 113 completed views
[Sequencer 06:06:20 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:06:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:06:20 INFO] incremented to [AERI set: name Y113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:06:20 INFO] X113.SIG(18)
[sigmove 06:06:20 DEBUG] transformed X113Ma.SPC -> X113MA.SPC
[sigmove 06:06:20 DEBUG] transformed X113Mb.SPC -> X113MB.SPC
[sigmove 06:06:20 DEBUG] transformed X113Mc.SPC -> X113MC.SPC
[sigmove 06:06:20 DEBUG] transformed X113Md.SPC -> X113MD.SPC
[sigmove 06:06:20 DEBUG] transformed X113Me.SPC -> X113ME.SPC
[sigmove 06:06:20 DEBUG] transformed X113Mf.SPC -> X113MF.SPC
[Status 06:06:20 INFO] data for X113 transferred to science data processing
[Tidy 06:06:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:06:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:06:20 INFO] resetting WatchDogTimer
[Status 06:06:21 INFO] Starting Set [AERI set: name Y113, 6 scans, 0 angle, D16300 command]
[Ingest 06:06:21 INFO] Sending XML status message
[Status 06:06:21 INFO] Mirror angle: 0
[Mirror 06:06:21 INFO] rotating to position Y
[Status 06:06:21 INFO] .SET file for ACQ96 ready
[Ingest 06:06:21 INFO] Starting acquisition
[Status 06:06:21 INFO] reading housekeeping
[Status 06:06:39 INFO] acquire complete
[Status 06:06:40 INFO] writing housekeeping
[Sequencer 06:06:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:06:40 INFO] incremented Y scene to 113 completed views
[Sequencer 06:06:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:06:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:06:40 INFO] incremented to [AERI set: name Z113, 6 scans, 0 angle, D16300 command] set
[sigmove 06:06:40 INFO] Y113.SIG(18)
[sigmove 06:06:40 DEBUG] transformed Y113Ma.SPC -> Y113MA.SPC
[sigmove 06:06:40 DEBUG] transformed Y113Mb.SPC -> Y113MB.SPC
[sigmove 06:06:40 DEBUG] transformed Y113Mc.SPC -> Y113MC.SPC
[sigmove 06:06:40 DEBUG] transformed Y113Md.SPC -> Y113MD.SPC
[sigmove 06:06:40 DEBUG] transformed Y113Me.SPC -> Y113ME.SPC
[sigmove 06:06:40 DEBUG] transformed Y113Mf.SPC -> Y113MF.SPC
[Status 06:06:40 INFO] data for Y113 transferred to science data processing
[Tidy 06:06:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:06:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:06:40 INFO] resetting WatchDogTimer
[Status 06:06:40 INFO] Starting Set [AERI set: name Z113, 6 scans, 0 angle, D16300 command]
[Ingest 06:06:40 INFO] Sending XML status message
[Status 06:06:40 INFO] Mirror angle: 0
[Mirror 06:06:40 INFO] rotating to position Z
[Status 06:06:40 INFO] .SET file for ACQ96 ready
[Ingest 06:06:40 INFO] Starting acquisition
[Status 06:06:40 INFO] reading housekeeping
[Status 06:06:58 INFO] acquire complete
[Status 06:06:59 INFO] writing housekeeping
[Sequencer 06:06:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:06:59 INFO] incremented Z scene to 113 completed views
[Sequencer 06:06:59 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:06:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:06:59 INFO] incremented to [AERI set: name A114, 6 scans, 120 angle, D28300 command] set
[sigmove 06:06:59 INFO] Z113.SIG(18)
[sigmove 06:06:59 DEBUG] transformed Z113Ma.SPC -> Z113MA.SPC
[sigmove 06:06:59 DEBUG] transformed Z113Mb.SPC -> Z113MB.SPC
[sigmove 06:06:59 DEBUG] transformed Z113Mc.SPC -> Z113MC.SPC
[sigmove 06:06:59 DEBUG] transformed Z113Md.SPC -> Z113MD.SPC
[sigmove 06:06:59 DEBUG] transformed Z113Me.SPC -> Z113ME.SPC
[sigmove 06:06:59 DEBUG] transformed Z113Mf.SPC -> Z113MF.SPC
[Status 06:06:59 INFO] data for Z113 transferred to science data processing
[Tidy 06:06:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:06:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:06:59 INFO] resetting WatchDogTimer
[Status 06:06:59 INFO] Starting Set [AERI set: name A114, 6 scans, 120 angle, D28300 command]
[Ingest 06:06:59 INFO] Sending XML status message
[Status 06:06:59 INFO] Mirror angle: 120
[Mirror 06:06:59 INFO] rotating to position A
[Status 06:07:00 INFO] .SET file for ACQ96 ready
[Ingest 06:07:00 INFO] Starting acquisition
[Status 06:07:01 INFO] reading housekeeping
[Status 06:07:18 INFO] acquire complete
[Status 06:07:19 INFO] writing housekeeping
[Sequencer 06:07:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:07:19 INFO] incremented A scene to 114 completed views
[Sequencer 06:07:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:07:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:07:19 INFO] incremented to [AERI set: name H114, 6 scans, 60 angle, D22500 command] set
[sigmove 06:07:19 INFO] A114.SIG(18)
[sigmove 06:07:19 DEBUG] transformed A114Ma.SPC -> A114MA.SPC
[sigmove 06:07:19 DEBUG] transformed A114Mb.SPC -> A114MB.SPC
[sigmove 06:07:19 DEBUG] transformed A114Mc.SPC -> A114MC.SPC
[sigmove 06:07:19 DEBUG] transformed A114Md.SPC -> A114MD.SPC
[sigmove 06:07:19 DEBUG] transformed A114Me.SPC -> A114ME.SPC
[sigmove 06:07:19 DEBUG] transformed A114Mf.SPC -> A114MF.SPC
[Status 06:07:19 INFO] data for A114 transferred to science data processing
[Tidy 06:07:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:07:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:07:19 INFO] resetting WatchDogTimer
[Status 06:07:19 INFO] Starting Set [AERI set: name H114, 6 scans, 60 angle, D22500 command]
[Ingest 06:07:19 INFO] Sending XML status message
[Status 06:07:19 INFO] Mirror angle: 60
[Mirror 06:07:19 INFO] rotating to position H
[Status 06:07:20 INFO] .SET file for ACQ96 ready
[Ingest 06:07:20 INFO] Starting acquisition
[Status 06:07:20 INFO] reading housekeeping
[Status 06:07:39 INFO] acquire complete
[Status 06:07:39 INFO] writing housekeeping
[Sequencer 06:07:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:07:39 INFO] incremented H scene to 114 completed views
[Sequencer 06:07:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:07:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:07:39 INFO] incremented to [AERI set: name S114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:07:39 INFO] H114.SIG(18)
[sigmove 06:07:39 DEBUG] transformed H114Ma.SPC -> H114MA.SPC
[sigmove 06:07:39 DEBUG] transformed H114Mb.SPC -> H114MB.SPC
[sigmove 06:07:39 DEBUG] transformed H114Mc.SPC -> H114MC.SPC
[sigmove 06:07:39 DEBUG] transformed H114Md.SPC -> H114MD.SPC
[sigmove 06:07:39 DEBUG] transformed H114Me.SPC -> H114ME.SPC
[sigmove 06:07:39 DEBUG] transformed H114Mf.SPC -> H114MF.SPC
[Status 06:07:39 INFO] data for H114 transferred to science data processing
[Tidy 06:07:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:07:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:07:39 INFO] resetting WatchDogTimer
[Status 06:07:39 INFO] Starting Set [AERI set: name S114, 6 scans, 0 angle, D16300 command]
[Ingest 06:07:39 INFO] Sending XML status message
[Status 06:07:39 INFO] Mirror angle: 0
[Mirror 06:07:39 INFO] rotating to position S
[Status 06:07:40 INFO] .SET file for ACQ96 ready
[Ingest 06:07:40 INFO] Starting acquisition
[Status 06:07:41 INFO] reading housekeeping
[Status 06:07:59 INFO] acquire complete
[Status 06:07:59 INFO] writing housekeeping
[Sequencer 06:07:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:07:59 INFO] incremented S scene to 114 completed views
[Sequencer 06:07:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:07:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:07:59 INFO] incremented to [AERI set: name T114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:07:59 INFO] S114.SIG(18)
[sigmove 06:07:59 DEBUG] transformed S114Ma.SPC -> S114MA.SPC
[sigmove 06:07:59 DEBUG] transformed S114Mb.SPC -> S114MB.SPC
[sigmove 06:07:59 DEBUG] transformed S114Mc.SPC -> S114MC.SPC
[sigmove 06:07:59 DEBUG] transformed S114Md.SPC -> S114MD.SPC
[sigmove 06:07:59 DEBUG] transformed S114Me.SPC -> S114ME.SPC
[sigmove 06:07:59 DEBUG] transformed S114Mf.SPC -> S114MF.SPC
[Status 06:07:59 INFO] data for S114 transferred to science data processing
[Tidy 06:07:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:07:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:07:59 INFO] resetting WatchDogTimer
[Status 06:07:59 INFO] Starting Set [AERI set: name T114, 6 scans, 0 angle, D16300 command]
[Ingest 06:07:59 INFO] Sending XML status message
[Status 06:07:59 INFO] Mirror angle: 0
[Mirror 06:08:00 INFO] rotating to position T
[Status 06:08:00 INFO] .SET file for ACQ96 ready
[Ingest 06:08:00 INFO] Starting acquisition
[Status 06:08:00 INFO] reading housekeeping
[Status 06:08:18 INFO] acquire complete
[Status 06:08:18 INFO] writing housekeeping
[Sequencer 06:08:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:08:18 INFO] incremented T scene to 114 completed views
[Sequencer 06:08:18 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:08:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:08:18 INFO] incremented to [AERI set: name U114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:08:18 INFO] T114.SIG(18)
[sigmove 06:08:18 DEBUG] transformed T114Ma.SPC -> T114MA.SPC
[sigmove 06:08:18 DEBUG] transformed T114Mb.SPC -> T114MB.SPC
[sigmove 06:08:18 DEBUG] transformed T114Mc.SPC -> T114MC.SPC
[sigmove 06:08:18 DEBUG] transformed T114Md.SPC -> T114MD.SPC
[sigmove 06:08:18 DEBUG] transformed T114Me.SPC -> T114ME.SPC
[sigmove 06:08:18 DEBUG] transformed T114Mf.SPC -> T114MF.SPC
[Status 06:08:18 INFO] data for T114 transferred to science data processing
[Tidy 06:08:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:08:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:08:18 INFO] resetting WatchDogTimer
[Status 06:08:19 INFO] Starting Set [AERI set: name U114, 6 scans, 0 angle, D16300 command]
[Ingest 06:08:19 INFO] Sending XML status message
[Status 06:08:19 INFO] Mirror angle: 0
[Mirror 06:08:19 INFO] rotating to position U
[Status 06:08:19 INFO] .SET file for ACQ96 ready
[Ingest 06:08:19 INFO] Starting acquisition
[Status 06:08:19 INFO] reading housekeeping
[Status 06:08:37 INFO] acquire complete
[Status 06:08:37 INFO] writing housekeeping
[Sequencer 06:08:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:08:37 INFO] incremented U scene to 114 completed views
[Sequencer 06:08:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:08:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:08:37 INFO] incremented to [AERI set: name V114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:08:37 INFO] U114.SIG(18)
[sigmove 06:08:37 DEBUG] transformed U114Ma.SPC -> U114MA.SPC
[sigmove 06:08:37 DEBUG] transformed U114Mb.SPC -> U114MB.SPC
[sigmove 06:08:37 DEBUG] transformed U114Mc.SPC -> U114MC.SPC
[sigmove 06:08:37 DEBUG] transformed U114Md.SPC -> U114MD.SPC
[sigmove 06:08:37 DEBUG] transformed U114Me.SPC -> U114ME.SPC
[sigmove 06:08:37 DEBUG] transformed U114Mf.SPC -> U114MF.SPC
[Status 06:08:37 INFO] data for U114 transferred to science data processing
[Tidy 06:08:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:08:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:08:37 INFO] resetting WatchDogTimer
[Status 06:08:38 INFO] Starting Set [AERI set: name V114, 6 scans, 0 angle, D16300 command]
[Ingest 06:08:38 INFO] Sending XML status message
[Status 06:08:38 INFO] Mirror angle: 0
[Mirror 06:08:38 INFO] rotating to position V
[Status 06:08:38 INFO] .SET file for ACQ96 ready
[Ingest 06:08:38 INFO] Starting acquisition
[Status 06:08:38 INFO] reading housekeeping
[Status 06:08:56 INFO] acquire complete
[Status 06:08:56 INFO] writing housekeeping
[Sequencer 06:08:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:08:56 INFO] incremented V scene to 114 completed views
[Sequencer 06:08:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:08:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:08:57 INFO] incremented to [AERI set: name W114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:08:57 INFO] V114.SIG(18)
[sigmove 06:08:57 DEBUG] transformed V114Ma.SPC -> V114MA.SPC
[sigmove 06:08:57 DEBUG] transformed V114Mb.SPC -> V114MB.SPC
[sigmove 06:08:57 DEBUG] transformed V114Mc.SPC -> V114MC.SPC
[sigmove 06:08:57 DEBUG] transformed V114Md.SPC -> V114MD.SPC
[sigmove 06:08:57 DEBUG] transformed V114Me.SPC -> V114ME.SPC
[sigmove 06:08:57 DEBUG] transformed V114Mf.SPC -> V114MF.SPC
[Status 06:08:57 INFO] data for V114 transferred to science data processing
[Tidy 06:08:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:08:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:08:57 INFO] resetting WatchDogTimer
[Status 06:08:57 INFO] Starting Set [AERI set: name W114, 6 scans, 0 angle, D16300 command]
[Ingest 06:08:57 INFO] Sending XML status message
[Status 06:08:57 INFO] Mirror angle: 0
[Mirror 06:08:57 INFO] rotating to position W
[Status 06:08:57 INFO] .SET file for ACQ96 ready
[Ingest 06:08:57 INFO] Starting acquisition
[Status 06:08:57 INFO] reading housekeeping
[Status 06:09:15 INFO] acquire complete
[Status 06:09:16 INFO] writing housekeeping
[Sequencer 06:09:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:09:16 INFO] incremented W scene to 114 completed views
[Sequencer 06:09:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:09:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:09:16 INFO] incremented to [AERI set: name X114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:09:16 INFO] W114.SIG(18)
[sigmove 06:09:16 DEBUG] transformed W114Ma.SPC -> W114MA.SPC
[sigmove 06:09:16 DEBUG] transformed W114Mb.SPC -> W114MB.SPC
[sigmove 06:09:16 DEBUG] transformed W114Mc.SPC -> W114MC.SPC
[sigmove 06:09:16 DEBUG] transformed W114Md.SPC -> W114MD.SPC
[sigmove 06:09:16 DEBUG] transformed W114Me.SPC -> W114ME.SPC
[sigmove 06:09:16 DEBUG] transformed W114Mf.SPC -> W114MF.SPC
[Status 06:09:16 INFO] data for W114 transferred to science data processing
[Tidy 06:09:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:09:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:09:16 INFO] resetting WatchDogTimer
[Status 06:09:16 INFO] Starting Set [AERI set: name X114, 6 scans, 0 angle, D16300 command]
[Ingest 06:09:16 INFO] Sending XML status message
[Status 06:09:16 INFO] Mirror angle: 0
[Mirror 06:09:16 INFO] rotating to position X
[Status 06:09:16 INFO] .SET file for ACQ96 ready
[Ingest 06:09:16 INFO] Starting acquisition
[Status 06:09:17 INFO] reading housekeeping
[Status 06:09:34 INFO] acquire complete
[Status 06:09:35 INFO] writing housekeeping
[Sequencer 06:09:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:09:35 INFO] incremented X scene to 114 completed views
[Sequencer 06:09:35 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:09:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:09:35 INFO] incremented to [AERI set: name Y114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:09:35 INFO] X114.SIG(18)
[sigmove 06:09:35 DEBUG] transformed X114Ma.SPC -> X114MA.SPC
[sigmove 06:09:35 DEBUG] transformed X114Mb.SPC -> X114MB.SPC
[sigmove 06:09:35 DEBUG] transformed X114Mc.SPC -> X114MC.SPC
[sigmove 06:09:35 DEBUG] transformed X114Md.SPC -> X114MD.SPC
[sigmove 06:09:35 DEBUG] transformed X114Me.SPC -> X114ME.SPC
[sigmove 06:09:35 DEBUG] transformed X114Mf.SPC -> X114MF.SPC
[Status 06:09:35 INFO] data for X114 transferred to science data processing
[Tidy 06:09:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:09:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:09:35 INFO] resetting WatchDogTimer
[Status 06:09:35 INFO] Starting Set [AERI set: name Y114, 6 scans, 0 angle, D16300 command]
[Ingest 06:09:35 INFO] Sending XML status message
[Status 06:09:35 INFO] Mirror angle: 0
[Mirror 06:09:35 INFO] rotating to position Y
[Status 06:09:35 INFO] .SET file for ACQ96 ready
[Ingest 06:09:35 INFO] Starting acquisition
[Status 06:09:36 INFO] reading housekeeping
[Status 06:09:53 INFO] acquire complete
[Status 06:09:54 INFO] writing housekeeping
[Sequencer 06:09:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:09:54 INFO] incremented Y scene to 114 completed views
[Sequencer 06:09:54 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:09:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:09:54 INFO] incremented to [AERI set: name Z114, 6 scans, 0 angle, D16300 command] set
[sigmove 06:09:54 INFO] Y114.SIG(18)
[sigmove 06:09:54 DEBUG] transformed Y114Ma.SPC -> Y114MA.SPC
[sigmove 06:09:54 DEBUG] transformed Y114Mb.SPC -> Y114MB.SPC
[sigmove 06:09:54 DEBUG] transformed Y114Mc.SPC -> Y114MC.SPC
[sigmove 06:09:54 DEBUG] transformed Y114Md.SPC -> Y114MD.SPC
[sigmove 06:09:54 DEBUG] transformed Y114Me.SPC -> Y114ME.SPC
[sigmove 06:09:54 DEBUG] transformed Y114Mf.SPC -> Y114MF.SPC
[Status 06:09:54 INFO] data for Y114 transferred to science data processing
[Tidy 06:09:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:09:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:09:54 INFO] resetting WatchDogTimer
[Status 06:09:54 INFO] Starting Set [AERI set: name Z114, 6 scans, 0 angle, D16300 command]
[Ingest 06:09:54 INFO] Sending XML status message
[Status 06:09:54 INFO] Mirror angle: 0
[Mirror 06:09:54 INFO] rotating to position Z
[Status 06:09:54 INFO] .SET file for ACQ96 ready
[Ingest 06:09:55 INFO] Starting acquisition
[Status 06:09:55 INFO] reading housekeeping
[Status 06:10:12 INFO] acquire complete
[Status 06:10:13 INFO] writing housekeeping
[Sequencer 06:10:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:10:13 INFO] incremented Z scene to 114 completed views
[Sequencer 06:10:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:10:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:10:13 INFO] incremented to [AERI set: name H115, 6 scans, 60 angle, D22500 command] set
[sigmove 06:10:13 INFO] Z114.SIG(18)
[sigmove 06:10:13 DEBUG] transformed Z114Ma.SPC -> Z114MA.SPC
[sigmove 06:10:13 DEBUG] transformed Z114Mb.SPC -> Z114MB.SPC
[sigmove 06:10:13 DEBUG] transformed Z114Mc.SPC -> Z114MC.SPC
[sigmove 06:10:13 DEBUG] transformed Z114Md.SPC -> Z114MD.SPC
[sigmove 06:10:13 DEBUG] transformed Z114Me.SPC -> Z114ME.SPC
[sigmove 06:10:13 DEBUG] transformed Z114Mf.SPC -> Z114MF.SPC
[Status 06:10:13 INFO] data for Z114 transferred to science data processing
[Tidy 06:10:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:10:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:10:13 INFO] resetting WatchDogTimer
[Status 06:10:13 INFO] Starting Set [AERI set: name H115, 6 scans, 60 angle, D22500 command]
[Ingest 06:10:13 INFO] Sending XML status message
[Status 06:10:13 INFO] Mirror angle: 60
[Mirror 06:10:13 INFO] rotating to position H
[Status 06:10:14 INFO] .SET file for ACQ96 ready
[Ingest 06:10:14 INFO] Starting acquisition
[Status 06:10:14 INFO] reading housekeeping
[Status 06:10:33 INFO] acquire complete
[Status 06:10:33 INFO] writing housekeeping
[Sequencer 06:10:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:10:33 INFO] incremented H scene to 115 completed views
[Sequencer 06:10:33 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:10:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:10:33 INFO] incremented to [AERI set: name A115, 6 scans, 120 angle, D28300 command] set
[sigmove 06:10:33 INFO] H115.SIG(18)
[sigmove 06:10:33 DEBUG] transformed H115Ma.SPC -> H115MA.SPC
[sigmove 06:10:33 DEBUG] transformed H115Mb.SPC -> H115MB.SPC
[sigmove 06:10:33 DEBUG] transformed H115Mc.SPC -> H115MC.SPC
[sigmove 06:10:33 DEBUG] transformed H115Md.SPC -> H115MD.SPC
[sigmove 06:10:33 DEBUG] transformed H115Me.SPC -> H115ME.SPC
[sigmove 06:10:33 DEBUG] transformed H115Mf.SPC -> H115MF.SPC
[Status 06:10:33 INFO] data for H115 transferred to science data processing
[Tidy 06:10:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:10:33 INFO] A113.FIN(19),H113.FIN(19),S113.FIN(19),T113.FIN(19),U113.FIN(19),V113.FIN(19),W113.FIN(19),X113.FIN(19),Y113.FIN(19),Z113.FIN(19),A114.FIN(19),H114.FIN(19),S114.FIN(19),T114.FIN(19),U114.FIN(19),V114.FIN(19),W114.FIN(19),X114.FIN(19),Y114.FIN(19),Z114.FIN(19)
[sigmove 06:10:33 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:10:33 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:10:35 DEBUG] done zipping
[WatchDog 06:10:35 INFO] resetting WatchDogTimer
[Status 06:10:36 INFO] Starting Set [AERI set: name A115, 6 scans, 120 angle, D28300 command]
[Ingest 06:10:36 INFO] Sending XML status message
[Status 06:10:36 INFO] Mirror angle: 120
[Mirror 06:10:36 INFO] rotating to position A
[Status 06:10:36 INFO] .SET file for ACQ96 ready
[Ingest 06:10:37 INFO] Starting acquisition
[Status 06:10:37 INFO] reading housekeeping
[Status 06:10:55 INFO] acquire complete
[Status 06:10:56 INFO] writing housekeeping
[Sequencer 06:10:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:10:56 INFO] incremented A scene to 115 completed views
[Sequencer 06:10:56 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:10:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:10:56 INFO] incremented to [AERI set: name S115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:10:56 INFO] A115.SIG(18)
[sigmove 06:10:56 DEBUG] transformed A115Ma.SPC -> A115MA.SPC
[sigmove 06:10:56 DEBUG] transformed A115Mb.SPC -> A115MB.SPC
[sigmove 06:10:56 DEBUG] transformed A115Mc.SPC -> A115MC.SPC
[sigmove 06:10:56 DEBUG] transformed A115Md.SPC -> A115MD.SPC
[sigmove 06:10:56 DEBUG] transformed A115Me.SPC -> A115ME.SPC
[sigmove 06:10:56 DEBUG] transformed A115Mf.SPC -> A115MF.SPC
[Status 06:10:56 INFO] data for A115 transferred to science data processing
[Tidy 06:10:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:10:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:10:56 INFO] resetting WatchDogTimer
[Status 06:10:56 INFO] Starting Set [AERI set: name S115, 6 scans, 0 angle, D16300 command]
[Ingest 06:10:56 INFO] Sending XML status message
[Status 06:10:56 INFO] Mirror angle: 0
[Mirror 06:10:56 INFO] rotating to position S
[Status 06:10:57 INFO] .SET file for ACQ96 ready
[Ingest 06:10:57 INFO] Starting acquisition
[Status 06:10:58 INFO] reading housekeeping
[Status 06:11:15 INFO] acquire complete
[Status 06:11:16 INFO] writing housekeeping
[Sequencer 06:11:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:11:16 INFO] incremented S scene to 115 completed views
[Sequencer 06:11:16 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:11:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:11:16 INFO] incremented to [AERI set: name T115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:11:16 INFO] S115.SIG(18)
[sigmove 06:11:16 DEBUG] transformed S115Ma.SPC -> S115MA.SPC
[sigmove 06:11:16 DEBUG] transformed S115Mb.SPC -> S115MB.SPC
[sigmove 06:11:16 DEBUG] transformed S115Mc.SPC -> S115MC.SPC
[sigmove 06:11:16 DEBUG] transformed S115Md.SPC -> S115MD.SPC
[sigmove 06:11:16 DEBUG] transformed S115Me.SPC -> S115ME.SPC
[sigmove 06:11:16 DEBUG] transformed S115Mf.SPC -> S115MF.SPC
[Status 06:11:16 INFO] data for S115 transferred to science data processing
[Tidy 06:11:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:11:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:11:16 INFO] resetting WatchDogTimer
[Status 06:11:16 INFO] Starting Set [AERI set: name T115, 6 scans, 0 angle, D16300 command]
[Ingest 06:11:16 INFO] Sending XML status message
[Status 06:11:16 INFO] Mirror angle: 0
[Mirror 06:11:16 INFO] rotating to position T
[Status 06:11:16 INFO] .SET file for ACQ96 ready
[Ingest 06:11:17 INFO] Starting acquisition
[Status 06:11:17 INFO] reading housekeeping
[Status 06:11:34 INFO] acquire complete
[Status 06:11:35 INFO] writing housekeeping
[Sequencer 06:11:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:11:35 INFO] incremented T scene to 115 completed views
[Sequencer 06:11:35 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:11:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:11:35 INFO] incremented to [AERI set: name U115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:11:35 INFO] T115.SIG(18)
[sigmove 06:11:35 DEBUG] transformed T115Ma.SPC -> T115MA.SPC
[sigmove 06:11:35 DEBUG] transformed T115Mb.SPC -> T115MB.SPC
[sigmove 06:11:35 DEBUG] transformed T115Mc.SPC -> T115MC.SPC
[sigmove 06:11:35 DEBUG] transformed T115Md.SPC -> T115MD.SPC
[sigmove 06:11:35 DEBUG] transformed T115Me.SPC -> T115ME.SPC
[sigmove 06:11:35 DEBUG] transformed T115Mf.SPC -> T115MF.SPC
[Status 06:11:35 INFO] data for T115 transferred to science data processing
[Tidy 06:11:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:11:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:11:35 INFO] resetting WatchDogTimer
[Status 06:11:35 INFO] Starting Set [AERI set: name U115, 6 scans, 0 angle, D16300 command]
[Ingest 06:11:35 INFO] Sending XML status message
[Status 06:11:35 INFO] Mirror angle: 0
[Mirror 06:11:35 INFO] rotating to position U
[Status 06:11:35 INFO] .SET file for ACQ96 ready
[Ingest 06:11:36 INFO] Starting acquisition
[Status 06:11:36 INFO] reading housekeeping
[Status 06:11:53 INFO] acquire complete
[Status 06:11:54 INFO] writing housekeeping
[Sequencer 06:11:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:11:54 INFO] incremented U scene to 115 completed views
[Sequencer 06:11:54 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:11:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:11:54 INFO] incremented to [AERI set: name V115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:11:54 INFO] U115.SIG(18)
[sigmove 06:11:54 DEBUG] transformed U115Ma.SPC -> U115MA.SPC
[sigmove 06:11:54 DEBUG] transformed U115Mb.SPC -> U115MB.SPC
[sigmove 06:11:54 DEBUG] transformed U115Mc.SPC -> U115MC.SPC
[sigmove 06:11:54 DEBUG] transformed U115Md.SPC -> U115MD.SPC
[sigmove 06:11:54 DEBUG] transformed U115Me.SPC -> U115ME.SPC
[sigmove 06:11:54 DEBUG] transformed U115Mf.SPC -> U115MF.SPC
[Status 06:11:54 INFO] data for U115 transferred to science data processing
[Tidy 06:11:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:11:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:11:54 INFO] resetting WatchDogTimer
[Status 06:11:54 INFO] Starting Set [AERI set: name V115, 6 scans, 0 angle, D16300 command]
[Ingest 06:11:54 INFO] Sending XML status message
[Status 06:11:54 INFO] Mirror angle: 0
[Mirror 06:11:54 INFO] rotating to position V
[Status 06:11:55 INFO] .SET file for ACQ96 ready
[Ingest 06:11:55 INFO] Starting acquisition
[Status 06:11:55 INFO] reading housekeeping
[Status 06:12:12 INFO] acquire complete
[Status 06:12:13 INFO] writing housekeeping
[Sequencer 06:12:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:12:13 INFO] incremented V scene to 115 completed views
[Sequencer 06:12:13 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:12:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:12:13 INFO] incremented to [AERI set: name W115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:12:13 INFO] V115.SIG(18)
[sigmove 06:12:13 DEBUG] transformed V115Ma.SPC -> V115MA.SPC
[sigmove 06:12:13 DEBUG] transformed V115Mb.SPC -> V115MB.SPC
[sigmove 06:12:13 DEBUG] transformed V115Mc.SPC -> V115MC.SPC
[sigmove 06:12:13 DEBUG] transformed V115Md.SPC -> V115MD.SPC
[sigmove 06:12:13 DEBUG] transformed V115Me.SPC -> V115ME.SPC
[sigmove 06:12:13 DEBUG] transformed V115Mf.SPC -> V115MF.SPC
[Status 06:12:13 INFO] data for V115 transferred to science data processing
[Tidy 06:12:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:12:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:12:13 INFO] resetting WatchDogTimer
[Status 06:12:13 INFO] Starting Set [AERI set: name W115, 6 scans, 0 angle, D16300 command]
[Ingest 06:12:13 INFO] Sending XML status message
[Status 06:12:13 INFO] Mirror angle: 0
[Mirror 06:12:13 INFO] rotating to position W
[Status 06:12:14 INFO] .SET file for ACQ96 ready
[Ingest 06:12:14 INFO] Starting acquisition
[Status 06:12:14 INFO] reading housekeeping
[Status 06:12:32 INFO] acquire complete
[Status 06:12:32 INFO] writing housekeeping
[Sequencer 06:12:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:12:32 INFO] incremented W scene to 115 completed views
[Sequencer 06:12:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:12:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:12:32 INFO] incremented to [AERI set: name X115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:12:32 INFO] W115.SIG(18)
[sigmove 06:12:32 DEBUG] transformed W115Ma.SPC -> W115MA.SPC
[sigmove 06:12:32 DEBUG] transformed W115Mb.SPC -> W115MB.SPC
[sigmove 06:12:32 DEBUG] transformed W115Mc.SPC -> W115MC.SPC
[sigmove 06:12:32 DEBUG] transformed W115Md.SPC -> W115MD.SPC
[sigmove 06:12:32 DEBUG] transformed W115Me.SPC -> W115ME.SPC
[sigmove 06:12:32 DEBUG] transformed W115Mf.SPC -> W115MF.SPC
[Status 06:12:32 INFO] data for W115 transferred to science data processing
[Tidy 06:12:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:12:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:12:32 INFO] resetting WatchDogTimer
[Status 06:12:32 INFO] Starting Set [AERI set: name X115, 6 scans, 0 angle, D16300 command]
[Ingest 06:12:32 INFO] Sending XML status message
[Status 06:12:32 INFO] Mirror angle: 0
[Mirror 06:12:32 INFO] rotating to position X
[Status 06:12:33 INFO] .SET file for ACQ96 ready
[Ingest 06:12:33 INFO] Starting acquisition
[Status 06:12:33 INFO] reading housekeeping
[Status 06:12:51 INFO] acquire complete
[Status 06:12:51 INFO] writing housekeeping
[Sequencer 06:12:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:12:51 INFO] incremented X scene to 115 completed views
[Sequencer 06:12:51 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:12:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:12:51 INFO] incremented to [AERI set: name Y115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:12:51 INFO] X115.SIG(18)
[sigmove 06:12:51 DEBUG] transformed X115Ma.SPC -> X115MA.SPC
[sigmove 06:12:51 DEBUG] transformed X115Mb.SPC -> X115MB.SPC
[sigmove 06:12:51 DEBUG] transformed X115Mc.SPC -> X115MC.SPC
[sigmove 06:12:51 DEBUG] transformed X115Md.SPC -> X115MD.SPC
[sigmove 06:12:51 DEBUG] transformed X115Me.SPC -> X115ME.SPC
[sigmove 06:12:51 DEBUG] transformed X115Mf.SPC -> X115MF.SPC
[Status 06:12:51 INFO] data for X115 transferred to science data processing
[Tidy 06:12:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:12:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:12:51 INFO] resetting WatchDogTimer
[Status 06:12:51 INFO] Starting Set [AERI set: name Y115, 6 scans, 0 angle, D16300 command]
[Ingest 06:12:51 INFO] Sending XML status message
[Status 06:12:51 INFO] Mirror angle: 0
[Mirror 06:12:52 INFO] rotating to position Y
[Status 06:12:52 INFO] .SET file for ACQ96 ready
[Ingest 06:12:52 INFO] Starting acquisition
[Status 06:12:52 INFO] reading housekeeping
[Status 06:13:10 INFO] acquire complete
[Status 06:13:10 INFO] writing housekeeping
[Sequencer 06:13:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:13:10 INFO] incremented Y scene to 115 completed views
[Sequencer 06:13:10 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:13:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:13:10 INFO] incremented to [AERI set: name Z115, 6 scans, 0 angle, D16300 command] set
[sigmove 06:13:10 INFO] Y115.SIG(18)
[sigmove 06:13:10 DEBUG] transformed Y115Ma.SPC -> Y115MA.SPC
[sigmove 06:13:10 DEBUG] transformed Y115Mb.SPC -> Y115MB.SPC
[sigmove 06:13:10 DEBUG] transformed Y115Mc.SPC -> Y115MC.SPC
[sigmove 06:13:10 DEBUG] transformed Y115Md.SPC -> Y115MD.SPC
[sigmove 06:13:10 DEBUG] transformed Y115Me.SPC -> Y115ME.SPC
[sigmove 06:13:10 DEBUG] transformed Y115Mf.SPC -> Y115MF.SPC
[Status 06:13:10 INFO] data for Y115 transferred to science data processing
[Tidy 06:13:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:13:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:13:10 INFO] resetting WatchDogTimer
[Status 06:13:10 INFO] Starting Set [AERI set: name Z115, 6 scans, 0 angle, D16300 command]
[Ingest 06:13:10 INFO] Sending XML status message
[Status 06:13:10 INFO] Mirror angle: 0
[Mirror 06:13:11 INFO] rotating to position Z
[Status 06:13:11 INFO] .SET file for ACQ96 ready
[Ingest 06:13:11 INFO] Starting acquisition
[Status 06:13:11 INFO] reading housekeeping
[Status 06:13:29 INFO] acquire complete
[Status 06:13:29 INFO] writing housekeeping
[Sequencer 06:13:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:13:29 INFO] incremented Z scene to 115 completed views
[Sequencer 06:13:29 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:13:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:13:29 INFO] incremented to [AERI set: name A116, 6 scans, 120 angle, D28300 command] set
[sigmove 06:13:29 INFO] Z115.SIG(18)
[sigmove 06:13:29 DEBUG] transformed Z115Ma.SPC -> Z115MA.SPC
[sigmove 06:13:29 DEBUG] transformed Z115Mb.SPC -> Z115MB.SPC
[sigmove 06:13:29 DEBUG] transformed Z115Mc.SPC -> Z115MC.SPC
[sigmove 06:13:29 DEBUG] transformed Z115Md.SPC -> Z115MD.SPC
[sigmove 06:13:29 DEBUG] transformed Z115Me.SPC -> Z115ME.SPC
[sigmove 06:13:29 DEBUG] transformed Z115Mf.SPC -> Z115MF.SPC
[Status 06:13:29 INFO] data for Z115 transferred to science data processing
[Tidy 06:13:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:13:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:13:29 INFO] resetting WatchDogTimer
[Status 06:13:30 INFO] Starting Set [AERI set: name A116, 6 scans, 120 angle, D28300 command]
[Ingest 06:13:30 INFO] Sending XML status message
[Status 06:13:30 INFO] Mirror angle: 120
[Mirror 06:13:30 INFO] rotating to position A
[Status 06:13:31 INFO] .SET file for ACQ96 ready
[Ingest 06:13:31 INFO] Starting acquisition
[Status 06:13:31 INFO] reading housekeeping
[Status 06:13:49 INFO] acquire complete
[Status 06:13:50 INFO] writing housekeeping
[Sequencer 06:13:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:13:50 INFO] incremented A scene to 116 completed views
[Sequencer 06:13:50 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:13:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:13:50 INFO] incremented to [AERI set: name H116, 6 scans, 60 angle, D22500 command] set
[sigmove 06:13:50 INFO] A116.SIG(18)
[sigmove 06:13:50 DEBUG] transformed A116Ma.SPC -> A116MA.SPC
[sigmove 06:13:50 DEBUG] transformed A116Mb.SPC -> A116MB.SPC
[sigmove 06:13:50 DEBUG] transformed A116Mc.SPC -> A116MC.SPC
[sigmove 06:13:50 DEBUG] transformed A116Md.SPC -> A116MD.SPC
[sigmove 06:13:50 DEBUG] transformed A116Me.SPC -> A116ME.SPC
[sigmove 06:13:50 DEBUG] transformed A116Mf.SPC -> A116MF.SPC
[Status 06:13:50 INFO] data for A116 transferred to science data processing
[Tidy 06:13:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:13:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:13:50 INFO] resetting WatchDogTimer
[Status 06:13:50 INFO] Starting Set [AERI set: name H116, 6 scans, 60 angle, D22500 command]
[Ingest 06:13:50 INFO] Sending XML status message
[Status 06:13:50 INFO] Mirror angle: 60
[Mirror 06:13:50 INFO] rotating to position H
[Status 06:13:51 INFO] .SET file for ACQ96 ready
[Ingest 06:13:51 INFO] Starting acquisition
[Status 06:13:51 INFO] reading housekeeping
[Status 06:14:09 INFO] acquire complete
[Status 06:14:10 INFO] writing housekeeping
[Sequencer 06:14:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:14:10 INFO] incremented H scene to 116 completed views
[Sequencer 06:14:10 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:14:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:14:10 INFO] incremented to [AERI set: name S116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:14:10 INFO] H116.SIG(18)
[sigmove 06:14:10 DEBUG] transformed H116Ma.SPC -> H116MA.SPC
[sigmove 06:14:10 DEBUG] transformed H116Mb.SPC -> H116MB.SPC
[sigmove 06:14:10 DEBUG] transformed H116Mc.SPC -> H116MC.SPC
[sigmove 06:14:10 DEBUG] transformed H116Md.SPC -> H116MD.SPC
[sigmove 06:14:10 DEBUG] transformed H116Me.SPC -> H116ME.SPC
[sigmove 06:14:10 DEBUG] transformed H116Mf.SPC -> H116MF.SPC
[Status 06:14:10 INFO] data for H116 transferred to science data processing
[Tidy 06:14:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:14:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:14:10 INFO] resetting WatchDogTimer
[Status 06:14:10 INFO] Starting Set [AERI set: name S116, 6 scans, 0 angle, D16300 command]
[Ingest 06:14:10 INFO] Sending XML status message
[Status 06:14:10 INFO] Mirror angle: 0
[Mirror 06:14:10 INFO] rotating to position S
[Status 06:14:11 INFO] .SET file for ACQ96 ready
[Ingest 06:14:11 INFO] Starting acquisition
[Status 06:14:11 INFO] reading housekeeping
[Status 06:14:29 INFO] acquire complete
[Status 06:14:30 INFO] writing housekeeping
[Sequencer 06:14:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:14:30 INFO] incremented S scene to 116 completed views
[Sequencer 06:14:30 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:14:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:14:30 INFO] incremented to [AERI set: name T116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:14:30 INFO] S116.SIG(18)
[sigmove 06:14:30 DEBUG] transformed S116Ma.SPC -> S116MA.SPC
[sigmove 06:14:30 DEBUG] transformed S116Mb.SPC -> S116MB.SPC
[sigmove 06:14:30 DEBUG] transformed S116Mc.SPC -> S116MC.SPC
[sigmove 06:14:30 DEBUG] transformed S116Md.SPC -> S116MD.SPC
[sigmove 06:14:30 DEBUG] transformed S116Me.SPC -> S116ME.SPC
[sigmove 06:14:30 DEBUG] transformed S116Mf.SPC -> S116MF.SPC
[Status 06:14:30 INFO] data for S116 transferred to science data processing
[Tidy 06:14:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:14:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:14:30 INFO] resetting WatchDogTimer
[Status 06:14:30 INFO] Starting Set [AERI set: name T116, 6 scans, 0 angle, D16300 command]
[Ingest 06:14:30 INFO] Sending XML status message
[Status 06:14:30 INFO] Mirror angle: 0
[Mirror 06:14:30 INFO] rotating to position T
[Status 06:14:31 INFO] .SET file for ACQ96 ready
[Ingest 06:14:31 INFO] Starting acquisition
[Status 06:14:31 INFO] reading housekeeping
[Status 06:14:48 INFO] acquire complete
[Status 06:14:49 INFO] writing housekeeping
[Sequencer 06:14:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:14:49 INFO] incremented T scene to 116 completed views
[Sequencer 06:14:49 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:14:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:14:49 INFO] incremented to [AERI set: name U116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:14:49 INFO] T116.SIG(18)
[sigmove 06:14:49 DEBUG] transformed T116Ma.SPC -> T116MA.SPC
[sigmove 06:14:49 DEBUG] transformed T116Mb.SPC -> T116MB.SPC
[sigmove 06:14:49 DEBUG] transformed T116Mc.SPC -> T116MC.SPC
[sigmove 06:14:49 DEBUG] transformed T116Md.SPC -> T116MD.SPC
[sigmove 06:14:49 DEBUG] transformed T116Me.SPC -> T116ME.SPC
[sigmove 06:14:49 DEBUG] transformed T116Mf.SPC -> T116MF.SPC
[Status 06:14:49 INFO] data for T116 transferred to science data processing
[Tidy 06:14:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:14:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:14:49 INFO] resetting WatchDogTimer
[Status 06:14:49 INFO] Starting Set [AERI set: name U116, 6 scans, 0 angle, D16300 command]
[Ingest 06:14:49 INFO] Sending XML status message
[Status 06:14:49 INFO] Mirror angle: 0
[Mirror 06:14:49 INFO] rotating to position U
[Status 06:14:50 INFO] .SET file for ACQ96 ready
[Ingest 06:14:50 INFO] Starting acquisition
[Status 06:14:50 INFO] reading housekeeping
[Status 06:15:08 INFO] acquire complete
[Status 06:15:08 INFO] writing housekeeping
[Sequencer 06:15:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:15:08 INFO] incremented U scene to 116 completed views
[Sequencer 06:15:08 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:15:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:15:08 INFO] incremented to [AERI set: name V116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:15:08 INFO] U116.SIG(18)
[sigmove 06:15:08 DEBUG] transformed U116Ma.SPC -> U116MA.SPC
[sigmove 06:15:08 DEBUG] transformed U116Mb.SPC -> U116MB.SPC
[sigmove 06:15:08 DEBUG] transformed U116Mc.SPC -> U116MC.SPC
[sigmove 06:15:08 DEBUG] transformed U116Md.SPC -> U116MD.SPC
[sigmove 06:15:08 DEBUG] transformed U116Me.SPC -> U116ME.SPC
[sigmove 06:15:08 DEBUG] transformed U116Mf.SPC -> U116MF.SPC
[Status 06:15:08 INFO] data for U116 transferred to science data processing
[Tidy 06:15:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:15:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:15:08 INFO] resetting WatchDogTimer
[Status 06:15:08 INFO] Starting Set [AERI set: name V116, 6 scans, 0 angle, D16300 command]
[Ingest 06:15:08 INFO] Sending XML status message
[Status 06:15:08 INFO] Mirror angle: 0
[Mirror 06:15:09 INFO] rotating to position V
[Status 06:15:09 INFO] .SET file for ACQ96 ready
[Ingest 06:15:09 INFO] Starting acquisition
[Status 06:15:09 INFO] reading housekeeping
[Status 06:15:27 INFO] acquire complete
[Status 06:15:27 INFO] writing housekeeping
[Sequencer 06:15:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:15:27 INFO] incremented V scene to 116 completed views
[Sequencer 06:15:27 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:15:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:15:27 INFO] incremented to [AERI set: name W116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:15:27 INFO] V116.SIG(18)
[sigmove 06:15:27 DEBUG] transformed V116Ma.SPC -> V116MA.SPC
[sigmove 06:15:27 DEBUG] transformed V116Mb.SPC -> V116MB.SPC
[sigmove 06:15:27 DEBUG] transformed V116Mc.SPC -> V116MC.SPC
[sigmove 06:15:27 DEBUG] transformed V116Md.SPC -> V116MD.SPC
[sigmove 06:15:27 DEBUG] transformed V116Me.SPC -> V116ME.SPC
[sigmove 06:15:27 DEBUG] transformed V116Mf.SPC -> V116MF.SPC
[Status 06:15:27 INFO] data for V116 transferred to science data processing
[Tidy 06:15:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:15:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:15:27 INFO] resetting WatchDogTimer
[Status 06:15:27 INFO] Starting Set [AERI set: name W116, 6 scans, 0 angle, D16300 command]
[Ingest 06:15:27 INFO] Sending XML status message
[Status 06:15:27 INFO] Mirror angle: 0
[Mirror 06:15:28 INFO] rotating to position W
[Status 06:15:28 INFO] .SET file for ACQ96 ready
[Ingest 06:15:28 INFO] Starting acquisition
[Status 06:15:28 INFO] reading housekeeping
[Status 06:15:46 INFO] acquire complete
[Status 06:15:46 INFO] writing housekeeping
[Sequencer 06:15:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:15:46 INFO] incremented W scene to 116 completed views
[Sequencer 06:15:46 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:15:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:15:46 INFO] incremented to [AERI set: name X116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:15:46 INFO] W116.SIG(18)
[sigmove 06:15:46 DEBUG] transformed W116Ma.SPC -> W116MA.SPC
[sigmove 06:15:46 DEBUG] transformed W116Mb.SPC -> W116MB.SPC
[sigmove 06:15:46 DEBUG] transformed W116Mc.SPC -> W116MC.SPC
[sigmove 06:15:46 DEBUG] transformed W116Md.SPC -> W116MD.SPC
[sigmove 06:15:46 DEBUG] transformed W116Me.SPC -> W116ME.SPC
[sigmove 06:15:46 DEBUG] transformed W116Mf.SPC -> W116MF.SPC
[Status 06:15:46 INFO] data for W116 transferred to science data processing
[Tidy 06:15:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:15:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:15:46 INFO] resetting WatchDogTimer
[Status 06:15:47 INFO] Starting Set [AERI set: name X116, 6 scans, 0 angle, D16300 command]
[Ingest 06:15:47 INFO] Sending XML status message
[Status 06:15:47 INFO] Mirror angle: 0
[Mirror 06:15:47 INFO] rotating to position X
[Status 06:15:47 INFO] .SET file for ACQ96 ready
[Ingest 06:15:47 INFO] Starting acquisition
[Status 06:15:47 INFO] reading housekeeping
[Status 06:16:05 INFO] acquire complete
[Status 06:16:05 INFO] writing housekeeping
[Sequencer 06:16:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:16:05 INFO] incremented X scene to 116 completed views
[Sequencer 06:16:05 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:16:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:16:05 INFO] incremented to [AERI set: name Y116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:16:05 INFO] X116.SIG(18)
[sigmove 06:16:05 DEBUG] transformed X116Ma.SPC -> X116MA.SPC
[sigmove 06:16:05 DEBUG] transformed X116Mb.SPC -> X116MB.SPC
[sigmove 06:16:05 DEBUG] transformed X116Mc.SPC -> X116MC.SPC
[sigmove 06:16:05 DEBUG] transformed X116Md.SPC -> X116MD.SPC
[sigmove 06:16:05 DEBUG] transformed X116Me.SPC -> X116ME.SPC
[sigmove 06:16:05 DEBUG] transformed X116Mf.SPC -> X116MF.SPC
[Status 06:16:05 INFO] data for X116 transferred to science data processing
[Tidy 06:16:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:16:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:16:05 INFO] resetting WatchDogTimer
[Status 06:16:06 INFO] Starting Set [AERI set: name Y116, 6 scans, 0 angle, D16300 command]
[Ingest 06:16:06 INFO] Sending XML status message
[Status 06:16:06 INFO] Mirror angle: 0
[Mirror 06:16:06 INFO] rotating to position Y
[Status 06:16:06 INFO] .SET file for ACQ96 ready
[Ingest 06:16:06 INFO] Starting acquisition
[Status 06:16:06 INFO] reading housekeeping
[Status 06:16:24 INFO] acquire complete
[Status 06:16:24 INFO] writing housekeeping
[Sequencer 06:16:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:16:24 INFO] incremented Y scene to 116 completed views
[Sequencer 06:16:24 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:16:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:16:24 INFO] incremented to [AERI set: name Z116, 6 scans, 0 angle, D16300 command] set
[sigmove 06:16:24 INFO] Y116.SIG(18)
[sigmove 06:16:24 DEBUG] transformed Y116Ma.SPC -> Y116MA.SPC
[sigmove 06:16:24 DEBUG] transformed Y116Mb.SPC -> Y116MB.SPC
[sigmove 06:16:24 DEBUG] transformed Y116Mc.SPC -> Y116MC.SPC
[sigmove 06:16:24 DEBUG] transformed Y116Md.SPC -> Y116MD.SPC
[sigmove 06:16:24 DEBUG] transformed Y116Me.SPC -> Y116ME.SPC
[sigmove 06:16:24 DEBUG] transformed Y116Mf.SPC -> Y116MF.SPC
[Status 06:16:24 INFO] data for Y116 transferred to science data processing
[Tidy 06:16:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:16:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:16:24 INFO] resetting WatchDogTimer
[Status 06:16:25 INFO] Starting Set [AERI set: name Z116, 6 scans, 0 angle, D16300 command]
[Ingest 06:16:25 INFO] Sending XML status message
[Status 06:16:25 INFO] Mirror angle: 0
[Mirror 06:16:25 INFO] rotating to position Z
[Status 06:16:25 INFO] .SET file for ACQ96 ready
[Ingest 06:16:25 INFO] Starting acquisition
[Status 06:16:25 INFO] reading housekeeping
[Status 06:16:43 INFO] acquire complete
[Status 06:16:44 INFO] writing housekeeping
[Sequencer 06:16:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:16:44 INFO] incremented Z scene to 116 completed views
[Sequencer 06:16:44 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:16:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:16:44 INFO] incremented to [AERI set: name H117, 6 scans, 60 angle, D22500 command] set
[sigmove 06:16:44 INFO] Z116.SIG(18)
[sigmove 06:16:44 DEBUG] transformed Z116Ma.SPC -> Z116MA.SPC
[sigmove 06:16:44 DEBUG] transformed Z116Mb.SPC -> Z116MB.SPC
[sigmove 06:16:44 DEBUG] transformed Z116Mc.SPC -> Z116MC.SPC
[sigmove 06:16:44 DEBUG] transformed Z116Md.SPC -> Z116MD.SPC
[sigmove 06:16:44 DEBUG] transformed Z116Me.SPC -> Z116ME.SPC
[sigmove 06:16:44 DEBUG] transformed Z116Mf.SPC -> Z116MF.SPC
[Status 06:16:44 INFO] data for Z116 transferred to science data processing
[Tidy 06:16:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:16:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:16:44 INFO] resetting WatchDogTimer
[Status 06:16:44 INFO] Starting Set [AERI set: name H117, 6 scans, 60 angle, D22500 command]
[Ingest 06:16:44 INFO] Sending XML status message
[Status 06:16:44 INFO] Mirror angle: 60
[Mirror 06:16:44 INFO] rotating to position H
[Status 06:16:45 INFO] .SET file for ACQ96 ready
[Ingest 06:16:45 INFO] Starting acquisition
[Status 06:16:45 INFO] reading housekeeping
[Status 06:17:03 INFO] acquire complete
[Status 06:17:04 INFO] writing housekeeping
[Sequencer 06:17:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:17:04 INFO] incremented H scene to 117 completed views
[Sequencer 06:17:04 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:17:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:17:04 INFO] incremented to [AERI set: name A117, 6 scans, 120 angle, D28300 command] set
[sigmove 06:17:04 INFO] H117.SIG(18)
[sigmove 06:17:04 DEBUG] transformed H117Ma.SPC -> H117MA.SPC
[sigmove 06:17:04 DEBUG] transformed H117Mb.SPC -> H117MB.SPC
[sigmove 06:17:04 DEBUG] transformed H117Mc.SPC -> H117MC.SPC
[sigmove 06:17:04 DEBUG] transformed H117Md.SPC -> H117MD.SPC
[sigmove 06:17:04 DEBUG] transformed H117Me.SPC -> H117ME.SPC
[sigmove 06:17:04 DEBUG] transformed H117Mf.SPC -> H117MF.SPC
[Status 06:17:04 INFO] data for H117 transferred to science data processing
[Tidy 06:17:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:17:04 INFO] A115.FIN(19),H115.FIN(19),S115.FIN(19),T115.FIN(19),U115.FIN(19),V115.FIN(19),W115.FIN(19),X115.FIN(19),Y115.FIN(19),Z115.FIN(19),A116.FIN(19),H116.FIN(19),S116.FIN(19),T116.FIN(19),U116.FIN(19),V116.FIN(19),W116.FIN(19),X116.FIN(19),Y116.FIN(19),Z116.FIN(19)
[sigmove 06:17:04 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:17:04 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:17:06 DEBUG] done zipping
[WatchDog 06:17:06 INFO] resetting WatchDogTimer
[Status 06:17:06 INFO] Starting Set [AERI set: name A117, 6 scans, 120 angle, D28300 command]
[Ingest 06:17:06 INFO] Sending XML status message
[Status 06:17:06 INFO] Mirror angle: 120
[Mirror 06:17:06 INFO] rotating to position A
[Status 06:17:07 INFO] .SET file for ACQ96 ready
[Ingest 06:17:07 INFO] Starting acquisition
[Status 06:17:08 INFO] reading housekeeping
[Status 06:17:26 INFO] acquire complete
[Status 06:17:26 INFO] writing housekeeping
[Sequencer 06:17:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:17:26 INFO] incremented A scene to 117 completed views
[Sequencer 06:17:26 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:17:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:17:26 INFO] incremented to [AERI set: name S117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:17:26 INFO] A117.SIG(18)
[sigmove 06:17:26 DEBUG] transformed A117Ma.SPC -> A117MA.SPC
[sigmove 06:17:26 DEBUG] transformed A117Mb.SPC -> A117MB.SPC
[sigmove 06:17:26 DEBUG] transformed A117Mc.SPC -> A117MC.SPC
[sigmove 06:17:26 DEBUG] transformed A117Md.SPC -> A117MD.SPC
[sigmove 06:17:26 DEBUG] transformed A117Me.SPC -> A117ME.SPC
[sigmove 06:17:26 DEBUG] transformed A117Mf.SPC -> A117MF.SPC
[Status 06:17:26 INFO] data for A117 transferred to science data processing
[Tidy 06:17:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:17:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:17:26 INFO] resetting WatchDogTimer
[Status 06:17:26 INFO] Starting Set [AERI set: name S117, 6 scans, 0 angle, D16300 command]
[Ingest 06:17:26 INFO] Sending XML status message
[Status 06:17:26 INFO] Mirror angle: 0
[Mirror 06:17:27 INFO] rotating to position S
[Status 06:17:28 INFO] .SET file for ACQ96 ready
[Ingest 06:17:28 INFO] Starting acquisition
[Status 06:17:28 INFO] reading housekeeping
[Status 06:17:46 INFO] acquire complete
[Status 06:17:46 INFO] writing housekeeping
[Sequencer 06:17:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:17:46 INFO] incremented S scene to 117 completed views
[Sequencer 06:17:46 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:17:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:17:46 INFO] incremented to [AERI set: name T117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:17:46 INFO] S117.SIG(18)
[sigmove 06:17:46 DEBUG] transformed S117Ma.SPC -> S117MA.SPC
[sigmove 06:17:46 DEBUG] transformed S117Mb.SPC -> S117MB.SPC
[sigmove 06:17:46 DEBUG] transformed S117Mc.SPC -> S117MC.SPC
[sigmove 06:17:46 DEBUG] transformed S117Md.SPC -> S117MD.SPC
[sigmove 06:17:46 DEBUG] transformed S117Me.SPC -> S117ME.SPC
[sigmove 06:17:46 DEBUG] transformed S117Mf.SPC -> S117MF.SPC
[Status 06:17:46 INFO] data for S117 transferred to science data processing
[Tidy 06:17:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:17:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:17:46 INFO] resetting WatchDogTimer
[Status 06:17:47 INFO] Starting Set [AERI set: name T117, 6 scans, 0 angle, D16300 command]
[Ingest 06:17:47 INFO] Sending XML status message
[Status 06:17:47 INFO] Mirror angle: 0
[Mirror 06:17:47 INFO] rotating to position T
[Status 06:17:47 INFO] .SET file for ACQ96 ready
[Ingest 06:17:47 INFO] Starting acquisition
[Status 06:17:47 INFO] reading housekeeping
[Status 06:18:05 INFO] acquire complete
[Status 06:18:05 INFO] writing housekeeping
[Sequencer 06:18:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:18:05 INFO] incremented T scene to 117 completed views
[Sequencer 06:18:05 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:18:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:18:06 INFO] incremented to [AERI set: name U117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:18:06 INFO] T117.SIG(18)
[sigmove 06:18:06 DEBUG] transformed T117Ma.SPC -> T117MA.SPC
[sigmove 06:18:06 DEBUG] transformed T117Mb.SPC -> T117MB.SPC
[sigmove 06:18:06 DEBUG] transformed T117Mc.SPC -> T117MC.SPC
[sigmove 06:18:06 DEBUG] transformed T117Md.SPC -> T117MD.SPC
[sigmove 06:18:06 DEBUG] transformed T117Me.SPC -> T117ME.SPC
[sigmove 06:18:06 DEBUG] transformed T117Mf.SPC -> T117MF.SPC
[Status 06:18:06 INFO] data for T117 transferred to science data processing
[Tidy 06:18:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:18:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:18:06 INFO] resetting WatchDogTimer
[Status 06:18:06 INFO] Starting Set [AERI set: name U117, 6 scans, 0 angle, D16300 command]
[Ingest 06:18:06 INFO] Sending XML status message
[Status 06:18:06 INFO] Mirror angle: 0
[Mirror 06:18:06 INFO] rotating to position U
[Status 06:18:06 INFO] .SET file for ACQ96 ready
[Ingest 06:18:06 INFO] Starting acquisition
[Status 06:18:06 INFO] reading housekeeping
[Status 06:18:24 INFO] acquire complete
[Status 06:18:25 INFO] writing housekeeping
[Sequencer 06:18:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:18:25 INFO] incremented U scene to 117 completed views
[Sequencer 06:18:25 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:18:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:18:25 INFO] incremented to [AERI set: name V117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:18:25 INFO] U117.SIG(18)
[sigmove 06:18:25 DEBUG] transformed U117Ma.SPC -> U117MA.SPC
[sigmove 06:18:25 DEBUG] transformed U117Mb.SPC -> U117MB.SPC
[sigmove 06:18:25 DEBUG] transformed U117Mc.SPC -> U117MC.SPC
[sigmove 06:18:25 DEBUG] transformed U117Md.SPC -> U117MD.SPC
[sigmove 06:18:25 DEBUG] transformed U117Me.SPC -> U117ME.SPC
[sigmove 06:18:25 DEBUG] transformed U117Mf.SPC -> U117MF.SPC
[Status 06:18:25 INFO] data for U117 transferred to science data processing
[Tidy 06:18:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:18:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:18:25 INFO] resetting WatchDogTimer
[Status 06:18:25 INFO] Starting Set [AERI set: name V117, 6 scans, 0 angle, D16300 command]
[Ingest 06:18:25 INFO] Sending XML status message
[Status 06:18:25 INFO] Mirror angle: 0
[Mirror 06:18:25 INFO] rotating to position V
[Status 06:18:25 INFO] .SET file for ACQ96 ready
[Ingest 06:18:25 INFO] Starting acquisition
[Status 06:18:26 INFO] reading housekeeping
[Status 06:18:43 INFO] acquire complete
[Status 06:18:44 INFO] writing housekeeping
[Sequencer 06:18:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:18:44 INFO] incremented V scene to 117 completed views
[Sequencer 06:18:44 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:18:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:18:44 INFO] incremented to [AERI set: name W117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:18:44 INFO] V117.SIG(18)
[sigmove 06:18:44 DEBUG] transformed V117Ma.SPC -> V117MA.SPC
[sigmove 06:18:44 DEBUG] transformed V117Mb.SPC -> V117MB.SPC
[sigmove 06:18:44 DEBUG] transformed V117Mc.SPC -> V117MC.SPC
[sigmove 06:18:44 DEBUG] transformed V117Md.SPC -> V117MD.SPC
[sigmove 06:18:44 DEBUG] transformed V117Me.SPC -> V117ME.SPC
[sigmove 06:18:44 DEBUG] transformed V117Mf.SPC -> V117MF.SPC
[Status 06:18:44 INFO] data for V117 transferred to science data processing
[Tidy 06:18:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:18:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:18:44 INFO] resetting WatchDogTimer
[Status 06:18:44 INFO] Starting Set [AERI set: name W117, 6 scans, 0 angle, D16300 command]
[Ingest 06:18:44 INFO] Sending XML status message
[Status 06:18:44 INFO] Mirror angle: 0
[Mirror 06:18:44 INFO] rotating to position W
[Status 06:18:44 INFO] .SET file for ACQ96 ready
[Ingest 06:18:44 INFO] Starting acquisition
[Status 06:18:45 INFO] reading housekeeping
[Status 06:19:02 INFO] acquire complete
[Status 06:19:03 INFO] writing housekeeping
[Sequencer 06:19:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:19:03 INFO] incremented W scene to 117 completed views
[Sequencer 06:19:03 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:19:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:19:03 INFO] incremented to [AERI set: name X117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:19:03 INFO] W117.SIG(18)
[sigmove 06:19:03 DEBUG] transformed W117Ma.SPC -> W117MA.SPC
[sigmove 06:19:03 DEBUG] transformed W117Mb.SPC -> W117MB.SPC
[sigmove 06:19:03 DEBUG] transformed W117Mc.SPC -> W117MC.SPC
[sigmove 06:19:03 DEBUG] transformed W117Md.SPC -> W117MD.SPC
[sigmove 06:19:03 DEBUG] transformed W117Me.SPC -> W117ME.SPC
[sigmove 06:19:03 DEBUG] transformed W117Mf.SPC -> W117MF.SPC
[Status 06:19:03 INFO] data for W117 transferred to science data processing
[Tidy 06:19:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:19:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:19:03 INFO] resetting WatchDogTimer
[Status 06:19:03 INFO] Starting Set [AERI set: name X117, 6 scans, 0 angle, D16300 command]
[Ingest 06:19:03 INFO] Sending XML status message
[Status 06:19:03 INFO] Mirror angle: 0
[Mirror 06:19:03 INFO] rotating to position X
[Status 06:19:03 INFO] .SET file for ACQ96 ready
[Ingest 06:19:04 INFO] Starting acquisition
[Status 06:19:04 INFO] reading housekeeping
[Status 06:19:21 INFO] acquire complete
[Status 06:19:22 INFO] writing housekeeping
[Sequencer 06:19:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:19:22 INFO] incremented X scene to 117 completed views
[Sequencer 06:19:22 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:19:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:19:22 INFO] incremented to [AERI set: name Y117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:19:22 INFO] X117.SIG(18)
[sigmove 06:19:22 DEBUG] transformed X117Ma.SPC -> X117MA.SPC
[sigmove 06:19:22 DEBUG] transformed X117Mb.SPC -> X117MB.SPC
[sigmove 06:19:22 DEBUG] transformed X117Mc.SPC -> X117MC.SPC
[sigmove 06:19:22 DEBUG] transformed X117Md.SPC -> X117MD.SPC
[sigmove 06:19:22 DEBUG] transformed X117Me.SPC -> X117ME.SPC
[sigmove 06:19:22 DEBUG] transformed X117Mf.SPC -> X117MF.SPC
[Status 06:19:22 INFO] data for X117 transferred to science data processing
[Tidy 06:19:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:19:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:19:22 INFO] resetting WatchDogTimer
[Status 06:19:22 INFO] Starting Set [AERI set: name Y117, 6 scans, 0 angle, D16300 command]
[Ingest 06:19:22 INFO] Sending XML status message
[Status 06:19:22 INFO] Mirror angle: 0
[Mirror 06:19:22 INFO] rotating to position Y
[Status 06:19:22 INFO] .SET file for ACQ96 ready
[Ingest 06:19:23 INFO] Starting acquisition
[Status 06:19:23 INFO] reading housekeeping
[Status 06:19:40 INFO] acquire complete
[Status 06:19:41 INFO] writing housekeeping
[Sequencer 06:19:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:19:41 INFO] incremented Y scene to 117 completed views
[Sequencer 06:19:41 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:19:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:19:41 INFO] incremented to [AERI set: name Z117, 6 scans, 0 angle, D16300 command] set
[sigmove 06:19:41 INFO] Y117.SIG(18)
[sigmove 06:19:41 DEBUG] transformed Y117Ma.SPC -> Y117MA.SPC
[sigmove 06:19:41 DEBUG] transformed Y117Mb.SPC -> Y117MB.SPC
[sigmove 06:19:41 DEBUG] transformed Y117Mc.SPC -> Y117MC.SPC
[sigmove 06:19:41 DEBUG] transformed Y117Md.SPC -> Y117MD.SPC
[sigmove 06:19:41 DEBUG] transformed Y117Me.SPC -> Y117ME.SPC
[sigmove 06:19:41 DEBUG] transformed Y117Mf.SPC -> Y117MF.SPC
[Status 06:19:41 INFO] data for Y117 transferred to science data processing
[Tidy 06:19:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:19:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:19:41 INFO] resetting WatchDogTimer
[Status 06:19:41 INFO] Starting Set [AERI set: name Z117, 6 scans, 0 angle, D16300 command]
[Ingest 06:19:41 INFO] Sending XML status message
[Status 06:19:41 INFO] Mirror angle: 0
[Mirror 06:19:41 INFO] rotating to position Z
[Status 06:19:42 INFO] .SET file for ACQ96 ready
[Ingest 06:19:42 INFO] Starting acquisition
[Status 06:19:42 INFO] reading housekeeping
[Status 06:19:59 INFO] acquire complete
[Status 06:20:00 INFO] writing housekeeping
[Sequencer 06:20:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:20:00 INFO] incremented Z scene to 117 completed views
[Sequencer 06:20:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:20:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:20:00 INFO] incremented to [AERI set: name A118, 6 scans, 120 angle, D28300 command] set
[sigmove 06:20:00 INFO] Z117.SIG(18)
[sigmove 06:20:00 DEBUG] transformed Z117Ma.SPC -> Z117MA.SPC
[sigmove 06:20:00 DEBUG] transformed Z117Mb.SPC -> Z117MB.SPC
[sigmove 06:20:00 DEBUG] transformed Z117Mc.SPC -> Z117MC.SPC
[sigmove 06:20:00 DEBUG] transformed Z117Md.SPC -> Z117MD.SPC
[sigmove 06:20:00 DEBUG] transformed Z117Me.SPC -> Z117ME.SPC
[sigmove 06:20:00 DEBUG] transformed Z117Mf.SPC -> Z117MF.SPC
[Status 06:20:00 INFO] data for Z117 transferred to science data processing
[Tidy 06:20:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:20:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:20:00 INFO] resetting WatchDogTimer
[Status 06:20:00 INFO] Starting Set [AERI set: name A118, 6 scans, 120 angle, D28300 command]
[Ingest 06:20:00 INFO] Sending XML status message
[Status 06:20:00 INFO] Mirror angle: 120
[Mirror 06:20:00 INFO] rotating to position A
[Status 06:20:02 INFO] .SET file for ACQ96 ready
[Ingest 06:20:02 INFO] Starting acquisition
[Status 06:20:02 INFO] reading housekeeping
[Status 06:20:20 INFO] acquire complete
[Status 06:20:20 INFO] writing housekeeping
[Sequencer 06:20:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:20:20 INFO] incremented A scene to 118 completed views
[Sequencer 06:20:20 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:20:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:20:20 INFO] incremented to [AERI set: name H118, 6 scans, 60 angle, D22500 command] set
[sigmove 06:20:20 INFO] A118.SIG(18)
[sigmove 06:20:20 DEBUG] transformed A118Ma.SPC -> A118MA.SPC
[sigmove 06:20:20 DEBUG] transformed A118Mb.SPC -> A118MB.SPC
[sigmove 06:20:20 DEBUG] transformed A118Mc.SPC -> A118MC.SPC
[sigmove 06:20:20 DEBUG] transformed A118Md.SPC -> A118MD.SPC
[sigmove 06:20:20 DEBUG] transformed A118Me.SPC -> A118ME.SPC
[sigmove 06:20:20 DEBUG] transformed A118Mf.SPC -> A118MF.SPC
[Status 06:20:20 INFO] data for A118 transferred to science data processing
[Tidy 06:20:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:20:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:20:20 INFO] resetting WatchDogTimer
[Status 06:20:20 INFO] Starting Set [AERI set: name H118, 6 scans, 60 angle, D22500 command]
[Ingest 06:20:20 INFO] Sending XML status message
[Status 06:20:20 INFO] Mirror angle: 60
[Mirror 06:20:21 INFO] rotating to position H
[Status 06:20:21 INFO] .SET file for ACQ96 ready
[Ingest 06:20:22 INFO] Starting acquisition
[Status 06:20:22 INFO] reading housekeeping
[Status 06:20:40 INFO] acquire complete
[Status 06:20:40 INFO] writing housekeeping
[Sequencer 06:20:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:20:40 INFO] incremented H scene to 118 completed views
[Sequencer 06:20:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:20:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:20:40 INFO] incremented to [AERI set: name S118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:20:40 INFO] H118.SIG(18)
[sigmove 06:20:40 DEBUG] transformed H118Ma.SPC -> H118MA.SPC
[sigmove 06:20:40 DEBUG] transformed H118Mb.SPC -> H118MB.SPC
[sigmove 06:20:40 DEBUG] transformed H118Mc.SPC -> H118MC.SPC
[sigmove 06:20:40 DEBUG] transformed H118Md.SPC -> H118MD.SPC
[sigmove 06:20:40 DEBUG] transformed H118Me.SPC -> H118ME.SPC
[sigmove 06:20:40 DEBUG] transformed H118Mf.SPC -> H118MF.SPC
[Status 06:20:40 INFO] data for H118 transferred to science data processing
[Tidy 06:20:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:20:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:20:40 INFO] resetting WatchDogTimer
[Status 06:20:41 INFO] Starting Set [AERI set: name S118, 6 scans, 0 angle, D16300 command]
[Ingest 06:20:41 INFO] Sending XML status message
[Status 06:20:41 INFO] Mirror angle: 0
[Mirror 06:20:41 INFO] rotating to position S
[Status 06:20:42 INFO] .SET file for ACQ96 ready
[Ingest 06:20:42 INFO] Starting acquisition
[Status 06:20:42 INFO] reading housekeeping
[Status 06:21:00 INFO] acquire complete
[Status 06:21:01 INFO] writing housekeeping
[Sequencer 06:21:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:21:01 INFO] incremented S scene to 118 completed views
[Sequencer 06:21:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:21:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:21:01 INFO] incremented to [AERI set: name T118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:21:01 INFO] S118.SIG(18)
[sigmove 06:21:01 DEBUG] transformed S118Ma.SPC -> S118MA.SPC
[sigmove 06:21:01 DEBUG] transformed S118Mb.SPC -> S118MB.SPC
[sigmove 06:21:01 DEBUG] transformed S118Mc.SPC -> S118MC.SPC
[sigmove 06:21:01 DEBUG] transformed S118Md.SPC -> S118MD.SPC
[sigmove 06:21:01 DEBUG] transformed S118Me.SPC -> S118ME.SPC
[sigmove 06:21:01 DEBUG] transformed S118Mf.SPC -> S118MF.SPC
[Status 06:21:01 INFO] data for S118 transferred to science data processing
[Tidy 06:21:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:21:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:21:01 INFO] resetting WatchDogTimer
[Status 06:21:01 INFO] Starting Set [AERI set: name T118, 6 scans, 0 angle, D16300 command]
[Ingest 06:21:01 INFO] Sending XML status message
[Status 06:21:01 INFO] Mirror angle: 0
[Mirror 06:21:01 INFO] rotating to position T
[Status 06:21:01 INFO] .SET file for ACQ96 ready
[Ingest 06:21:01 INFO] Starting acquisition
[Status 06:21:02 INFO] reading housekeeping
[Status 06:21:19 INFO] acquire complete
[Status 06:21:20 INFO] writing housekeeping
[Sequencer 06:21:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:21:20 INFO] incremented T scene to 118 completed views
[Sequencer 06:21:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:21:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:21:20 INFO] incremented to [AERI set: name U118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:21:20 INFO] T118.SIG(18)
[sigmove 06:21:20 DEBUG] transformed T118Ma.SPC -> T118MA.SPC
[sigmove 06:21:20 DEBUG] transformed T118Mb.SPC -> T118MB.SPC
[sigmove 06:21:20 DEBUG] transformed T118Mc.SPC -> T118MC.SPC
[sigmove 06:21:20 DEBUG] transformed T118Md.SPC -> T118MD.SPC
[sigmove 06:21:20 DEBUG] transformed T118Me.SPC -> T118ME.SPC
[sigmove 06:21:20 DEBUG] transformed T118Mf.SPC -> T118MF.SPC
[Status 06:21:20 INFO] data for T118 transferred to science data processing
[Tidy 06:21:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:21:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:21:20 INFO] resetting WatchDogTimer
[Status 06:21:20 INFO] Starting Set [AERI set: name U118, 6 scans, 0 angle, D16300 command]
[Ingest 06:21:20 INFO] Sending XML status message
[Status 06:21:20 INFO] Mirror angle: 0
[Mirror 06:21:20 INFO] rotating to position U
[Status 06:21:20 INFO] .SET file for ACQ96 ready
[Ingest 06:21:20 INFO] Starting acquisition
[Status 06:21:21 INFO] reading housekeeping
[Status 06:21:38 INFO] acquire complete
[Status 06:21:39 INFO] writing housekeeping
[Sequencer 06:21:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:21:39 INFO] incremented U scene to 118 completed views
[Sequencer 06:21:39 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:21:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:21:39 INFO] incremented to [AERI set: name V118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:21:39 INFO] U118.SIG(18)
[sigmove 06:21:39 DEBUG] transformed U118Ma.SPC -> U118MA.SPC
[sigmove 06:21:39 DEBUG] transformed U118Mb.SPC -> U118MB.SPC
[sigmove 06:21:39 DEBUG] transformed U118Mc.SPC -> U118MC.SPC
[sigmove 06:21:39 DEBUG] transformed U118Md.SPC -> U118MD.SPC
[sigmove 06:21:39 DEBUG] transformed U118Me.SPC -> U118ME.SPC
[sigmove 06:21:39 DEBUG] transformed U118Mf.SPC -> U118MF.SPC
[Status 06:21:39 INFO] data for U118 transferred to science data processing
[Tidy 06:21:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:21:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:21:39 INFO] resetting WatchDogTimer
[Status 06:21:39 INFO] Starting Set [AERI set: name V118, 6 scans, 0 angle, D16300 command]
[Ingest 06:21:39 INFO] Sending XML status message
[Status 06:21:39 INFO] Mirror angle: 0
[Mirror 06:21:39 INFO] rotating to position V
[Status 06:21:39 INFO] .SET file for ACQ96 ready
[Ingest 06:21:40 INFO] Starting acquisition
[Status 06:21:40 INFO] reading housekeeping
[Status 06:21:57 INFO] acquire complete
[Status 06:21:58 INFO] writing housekeeping
[Sequencer 06:21:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:21:58 INFO] incremented V scene to 118 completed views
[Sequencer 06:21:58 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:21:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:21:58 INFO] incremented to [AERI set: name W118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:21:58 INFO] V118.SIG(18)
[sigmove 06:21:58 DEBUG] transformed V118Ma.SPC -> V118MA.SPC
[sigmove 06:21:58 DEBUG] transformed V118Mb.SPC -> V118MB.SPC
[sigmove 06:21:58 DEBUG] transformed V118Mc.SPC -> V118MC.SPC
[sigmove 06:21:58 DEBUG] transformed V118Md.SPC -> V118MD.SPC
[sigmove 06:21:58 DEBUG] transformed V118Me.SPC -> V118ME.SPC
[sigmove 06:21:58 DEBUG] transformed V118Mf.SPC -> V118MF.SPC
[Status 06:21:58 INFO] data for V118 transferred to science data processing
[Tidy 06:21:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:21:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:21:58 INFO] resetting WatchDogTimer
[Status 06:21:58 INFO] Starting Set [AERI set: name W118, 6 scans, 0 angle, D16300 command]
[Ingest 06:21:58 INFO] Sending XML status message
[Status 06:21:58 INFO] Mirror angle: 0
[Mirror 06:21:58 INFO] rotating to position W
[Status 06:21:59 INFO] .SET file for ACQ96 ready
[Ingest 06:21:59 INFO] Starting acquisition
[Status 06:21:59 INFO] reading housekeeping
[Status 06:22:16 INFO] acquire complete
[Status 06:22:17 INFO] writing housekeeping
[Sequencer 06:22:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:22:17 INFO] incremented W scene to 118 completed views
[Sequencer 06:22:17 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:22:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:22:17 INFO] incremented to [AERI set: name X118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:22:17 INFO] W118.SIG(18)
[sigmove 06:22:17 DEBUG] transformed W118Ma.SPC -> W118MA.SPC
[sigmove 06:22:17 DEBUG] transformed W118Mb.SPC -> W118MB.SPC
[sigmove 06:22:17 DEBUG] transformed W118Mc.SPC -> W118MC.SPC
[sigmove 06:22:17 DEBUG] transformed W118Md.SPC -> W118MD.SPC
[sigmove 06:22:17 DEBUG] transformed W118Me.SPC -> W118ME.SPC
[sigmove 06:22:17 DEBUG] transformed W118Mf.SPC -> W118MF.SPC
[Status 06:22:17 INFO] data for W118 transferred to science data processing
[Tidy 06:22:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:22:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:22:17 INFO] resetting WatchDogTimer
[Status 06:22:17 INFO] Starting Set [AERI set: name X118, 6 scans, 0 angle, D16300 command]
[Ingest 06:22:17 INFO] Sending XML status message
[Status 06:22:17 INFO] Mirror angle: 0
[Mirror 06:22:17 INFO] rotating to position X
[Status 06:22:18 INFO] .SET file for ACQ96 ready
[Ingest 06:22:18 INFO] Starting acquisition
[Status 06:22:18 INFO] reading housekeeping
[Status 06:22:36 INFO] acquire complete
[Status 06:22:36 INFO] writing housekeeping
[Sequencer 06:22:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:22:36 INFO] incremented X scene to 118 completed views
[Sequencer 06:22:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:22:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:22:36 INFO] incremented to [AERI set: name Y118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:22:36 INFO] X118.SIG(18)
[sigmove 06:22:36 DEBUG] transformed X118Ma.SPC -> X118MA.SPC
[sigmove 06:22:36 DEBUG] transformed X118Mb.SPC -> X118MB.SPC
[sigmove 06:22:36 DEBUG] transformed X118Mc.SPC -> X118MC.SPC
[sigmove 06:22:36 DEBUG] transformed X118Md.SPC -> X118MD.SPC
[sigmove 06:22:36 DEBUG] transformed X118Me.SPC -> X118ME.SPC
[sigmove 06:22:36 DEBUG] transformed X118Mf.SPC -> X118MF.SPC
[Status 06:22:36 INFO] data for X118 transferred to science data processing
[Tidy 06:22:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:22:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:22:36 INFO] resetting WatchDogTimer
[Status 06:22:36 INFO] Starting Set [AERI set: name Y118, 6 scans, 0 angle, D16300 command]
[Ingest 06:22:36 INFO] Sending XML status message
[Status 06:22:36 INFO] Mirror angle: 0
[Mirror 06:22:36 INFO] rotating to position Y
[Status 06:22:37 INFO] .SET file for ACQ96 ready
[Ingest 06:22:37 INFO] Starting acquisition
[Status 06:22:37 INFO] reading housekeeping
[Status 06:22:55 INFO] acquire complete
[Status 06:22:55 INFO] writing housekeeping
[Sequencer 06:22:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:22:55 INFO] incremented Y scene to 118 completed views
[Sequencer 06:22:55 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:22:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:22:55 INFO] incremented to [AERI set: name Z118, 6 scans, 0 angle, D16300 command] set
[sigmove 06:22:55 INFO] Y118.SIG(18)
[sigmove 06:22:55 DEBUG] transformed Y118Ma.SPC -> Y118MA.SPC
[sigmove 06:22:55 DEBUG] transformed Y118Mb.SPC -> Y118MB.SPC
[sigmove 06:22:55 DEBUG] transformed Y118Mc.SPC -> Y118MC.SPC
[sigmove 06:22:55 DEBUG] transformed Y118Md.SPC -> Y118MD.SPC
[sigmove 06:22:55 DEBUG] transformed Y118Me.SPC -> Y118ME.SPC
[sigmove 06:22:55 DEBUG] transformed Y118Mf.SPC -> Y118MF.SPC
[Status 06:22:55 INFO] data for Y118 transferred to science data processing
[Tidy 06:22:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:22:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:22:55 INFO] resetting WatchDogTimer
[Status 06:22:55 INFO] Starting Set [AERI set: name Z118, 6 scans, 0 angle, D16300 command]
[Ingest 06:22:55 INFO] Sending XML status message
[Status 06:22:55 INFO] Mirror angle: 0
[Mirror 06:22:55 INFO] rotating to position Z
[Status 06:22:56 INFO] .SET file for ACQ96 ready
[Ingest 06:22:56 INFO] Starting acquisition
[Status 06:22:56 INFO] reading housekeeping
[Status 06:23:14 INFO] acquire complete
[Status 06:23:14 INFO] writing housekeeping
[Sequencer 06:23:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:23:14 INFO] incremented Z scene to 118 completed views
[Sequencer 06:23:14 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:23:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:23:14 INFO] incremented to [AERI set: name H119, 6 scans, 60 angle, D22500 command] set
[sigmove 06:23:14 INFO] Z118.SIG(18)
[sigmove 06:23:14 DEBUG] transformed Z118Ma.SPC -> Z118MA.SPC
[sigmove 06:23:14 DEBUG] transformed Z118Mb.SPC -> Z118MB.SPC
[sigmove 06:23:14 DEBUG] transformed Z118Mc.SPC -> Z118MC.SPC
[sigmove 06:23:14 DEBUG] transformed Z118Md.SPC -> Z118MD.SPC
[sigmove 06:23:14 DEBUG] transformed Z118Me.SPC -> Z118ME.SPC
[sigmove 06:23:14 DEBUG] transformed Z118Mf.SPC -> Z118MF.SPC
[Status 06:23:14 INFO] data for Z118 transferred to science data processing
[Tidy 06:23:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:23:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:23:14 INFO] resetting WatchDogTimer
[Status 06:23:14 INFO] Starting Set [AERI set: name H119, 6 scans, 60 angle, D22500 command]
[Ingest 06:23:14 INFO] Sending XML status message
[Status 06:23:14 INFO] Mirror angle: 60
[Mirror 06:23:15 INFO] rotating to position H
[Status 06:23:15 INFO] .SET file for ACQ96 ready
[Ingest 06:23:16 INFO] Starting acquisition
[Status 06:23:16 INFO] reading housekeeping
[Status 06:23:34 INFO] acquire complete
[Status 06:23:34 INFO] writing housekeeping
[Sequencer 06:23:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:23:34 INFO] incremented H scene to 119 completed views
[Sequencer 06:23:34 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:23:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:23:34 INFO] incremented to [AERI set: name A119, 6 scans, 120 angle, D28300 command] set
[sigmove 06:23:34 INFO] H119.SIG(18)
[sigmove 06:23:34 DEBUG] transformed H119Ma.SPC -> H119MA.SPC
[sigmove 06:23:34 DEBUG] transformed H119Mb.SPC -> H119MB.SPC
[sigmove 06:23:34 DEBUG] transformed H119Mc.SPC -> H119MC.SPC
[sigmove 06:23:34 DEBUG] transformed H119Md.SPC -> H119MD.SPC
[sigmove 06:23:34 DEBUG] transformed H119Me.SPC -> H119ME.SPC
[sigmove 06:23:34 DEBUG] transformed H119Mf.SPC -> H119MF.SPC
[Status 06:23:34 INFO] data for H119 transferred to science data processing
[Tidy 06:23:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:23:34 INFO] A117.FIN(19),H117.FIN(19),S117.FIN(19),T117.FIN(19),U117.FIN(19),V117.FIN(19),W117.FIN(19),X117.FIN(19),Y117.FIN(19),Z117.FIN(19),A118.FIN(19),H118.FIN(19),S118.FIN(19),T118.FIN(19),U118.FIN(19),V118.FIN(19),W118.FIN(19),X118.FIN(19),Y118.FIN(19),Z118.FIN(19)
[sigmove 06:23:34 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:23:35 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:23:37 DEBUG] done zipping
[WatchDog 06:23:37 INFO] resetting WatchDogTimer
[Status 06:23:37 INFO] Starting Set [AERI set: name A119, 6 scans, 120 angle, D28300 command]
[Ingest 06:23:37 INFO] Sending XML status message
[Status 06:23:37 INFO] Mirror angle: 120
[Mirror 06:23:37 INFO] rotating to position A
[Status 06:23:38 INFO] .SET file for ACQ96 ready
[Ingest 06:23:38 INFO] Starting acquisition
[Status 06:23:38 INFO] reading housekeeping
[Status 06:23:56 INFO] acquire complete
[Status 06:23:57 INFO] writing housekeeping
[Sequencer 06:23:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:23:57 INFO] incremented A scene to 119 completed views
[Sequencer 06:23:57 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:23:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:23:57 INFO] incremented to [AERI set: name S119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:23:57 INFO] A119.SIG(18)
[sigmove 06:23:57 DEBUG] transformed A119Ma.SPC -> A119MA.SPC
[sigmove 06:23:57 DEBUG] transformed A119Mb.SPC -> A119MB.SPC
[sigmove 06:23:57 DEBUG] transformed A119Mc.SPC -> A119MC.SPC
[sigmove 06:23:57 DEBUG] transformed A119Md.SPC -> A119MD.SPC
[sigmove 06:23:57 DEBUG] transformed A119Me.SPC -> A119ME.SPC
[sigmove 06:23:57 DEBUG] transformed A119Mf.SPC -> A119MF.SPC
[Status 06:23:57 INFO] data for A119 transferred to science data processing
[Tidy 06:23:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:23:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:23:57 INFO] resetting WatchDogTimer
[Status 06:23:57 INFO] Starting Set [AERI set: name S119, 6 scans, 0 angle, D16300 command]
[Ingest 06:23:57 INFO] Sending XML status message
[Status 06:23:57 INFO] Mirror angle: 0
[Mirror 06:23:57 INFO] rotating to position S
[Status 06:23:59 INFO] .SET file for ACQ96 ready
[Ingest 06:23:59 INFO] Starting acquisition
[Status 06:23:59 INFO] reading housekeeping
[Status 06:24:17 INFO] acquire complete
[Status 06:24:17 INFO] writing housekeeping
[Sequencer 06:24:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:24:17 INFO] incremented S scene to 119 completed views
[Sequencer 06:24:17 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:24:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:24:17 INFO] incremented to [AERI set: name T119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:24:17 INFO] S119.SIG(18)
[sigmove 06:24:17 DEBUG] transformed S119Ma.SPC -> S119MA.SPC
[sigmove 06:24:17 DEBUG] transformed S119Mb.SPC -> S119MB.SPC
[sigmove 06:24:17 DEBUG] transformed S119Mc.SPC -> S119MC.SPC
[sigmove 06:24:17 DEBUG] transformed S119Md.SPC -> S119MD.SPC
[sigmove 06:24:17 DEBUG] transformed S119Me.SPC -> S119ME.SPC
[sigmove 06:24:17 DEBUG] transformed S119Mf.SPC -> S119MF.SPC
[Status 06:24:17 INFO] data for S119 transferred to science data processing
[Tidy 06:24:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:24:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:24:17 INFO] resetting WatchDogTimer
[Status 06:24:17 INFO] Starting Set [AERI set: name T119, 6 scans, 0 angle, D16300 command]
[Ingest 06:24:17 INFO] Sending XML status message
[Status 06:24:17 INFO] Mirror angle: 0
[Mirror 06:24:17 INFO] rotating to position T
[Status 06:24:18 INFO] .SET file for ACQ96 ready
[Ingest 06:24:18 INFO] Starting acquisition
[Status 06:24:18 INFO] reading housekeeping
[Status 06:24:36 INFO] acquire complete
[Status 06:24:36 INFO] writing housekeeping
[Sequencer 06:24:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:24:36 INFO] incremented T scene to 119 completed views
[Sequencer 06:24:36 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:24:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:24:36 INFO] incremented to [AERI set: name U119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:24:36 INFO] T119.SIG(18)
[sigmove 06:24:36 DEBUG] transformed T119Ma.SPC -> T119MA.SPC
[sigmove 06:24:36 DEBUG] transformed T119Mb.SPC -> T119MB.SPC
[sigmove 06:24:36 DEBUG] transformed T119Mc.SPC -> T119MC.SPC
[sigmove 06:24:36 DEBUG] transformed T119Md.SPC -> T119MD.SPC
[sigmove 06:24:36 DEBUG] transformed T119Me.SPC -> T119ME.SPC
[sigmove 06:24:36 DEBUG] transformed T119Mf.SPC -> T119MF.SPC
[Status 06:24:36 INFO] data for T119 transferred to science data processing
[Tidy 06:24:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:24:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:24:36 INFO] resetting WatchDogTimer
[Status 06:24:36 INFO] Starting Set [AERI set: name U119, 6 scans, 0 angle, D16300 command]
[Ingest 06:24:36 INFO] Sending XML status message
[Status 06:24:36 INFO] Mirror angle: 0
[Mirror 06:24:37 INFO] rotating to position U
[Status 06:24:37 INFO] .SET file for ACQ96 ready
[Ingest 06:24:37 INFO] Starting acquisition
[Status 06:24:37 INFO] reading housekeeping
[Status 06:24:55 INFO] acquire complete
[Status 06:24:55 INFO] writing housekeeping
[Sequencer 06:24:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:24:55 INFO] incremented U scene to 119 completed views
[Sequencer 06:24:55 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:24:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:24:55 INFO] incremented to [AERI set: name V119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:24:55 INFO] U119.SIG(18)
[sigmove 06:24:55 DEBUG] transformed U119Ma.SPC -> U119MA.SPC
[sigmove 06:24:55 DEBUG] transformed U119Mb.SPC -> U119MB.SPC
[sigmove 06:24:55 DEBUG] transformed U119Mc.SPC -> U119MC.SPC
[sigmove 06:24:55 DEBUG] transformed U119Md.SPC -> U119MD.SPC
[sigmove 06:24:55 DEBUG] transformed U119Me.SPC -> U119ME.SPC
[sigmove 06:24:55 DEBUG] transformed U119Mf.SPC -> U119MF.SPC
[Status 06:24:55 INFO] data for U119 transferred to science data processing
[Tidy 06:24:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:24:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:24:55 INFO] resetting WatchDogTimer
[Status 06:24:55 INFO] Starting Set [AERI set: name V119, 6 scans, 0 angle, D16300 command]
[Ingest 06:24:55 INFO] Sending XML status message
[Status 06:24:55 INFO] Mirror angle: 0
[Mirror 06:24:56 INFO] rotating to position V
[Status 06:24:56 INFO] .SET file for ACQ96 ready
[Ingest 06:24:56 INFO] Starting acquisition
[Status 06:24:56 INFO] reading housekeeping
[Status 06:25:14 INFO] acquire complete
[Status 06:25:14 INFO] writing housekeeping
[Sequencer 06:25:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:25:14 INFO] incremented V scene to 119 completed views
[Sequencer 06:25:14 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:25:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:25:14 INFO] incremented to [AERI set: name W119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:25:14 INFO] V119.SIG(18)
[sigmove 06:25:14 DEBUG] transformed V119Ma.SPC -> V119MA.SPC
[sigmove 06:25:14 DEBUG] transformed V119Mb.SPC -> V119MB.SPC
[sigmove 06:25:14 DEBUG] transformed V119Mc.SPC -> V119MC.SPC
[sigmove 06:25:14 DEBUG] transformed V119Md.SPC -> V119MD.SPC
[sigmove 06:25:14 DEBUG] transformed V119Me.SPC -> V119ME.SPC
[sigmove 06:25:14 DEBUG] transformed V119Mf.SPC -> V119MF.SPC
[Status 06:25:14 INFO] data for V119 transferred to science data processing
[Tidy 06:25:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:25:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:25:14 INFO] resetting WatchDogTimer
[Status 06:25:15 INFO] Starting Set [AERI set: name W119, 6 scans, 0 angle, D16300 command]
[Ingest 06:25:15 INFO] Sending XML status message
[Status 06:25:15 INFO] Mirror angle: 0
[Mirror 06:25:15 INFO] rotating to position W
[Status 06:25:15 INFO] .SET file for ACQ96 ready
[Ingest 06:25:15 INFO] Starting acquisition
[Status 06:25:15 INFO] reading housekeeping
[Status 06:25:33 INFO] acquire complete
[Status 06:25:33 INFO] writing housekeeping
[Sequencer 06:25:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:25:33 INFO] incremented W scene to 119 completed views
[Sequencer 06:25:33 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:25:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:25:33 INFO] incremented to [AERI set: name X119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:25:33 INFO] W119.SIG(18)
[sigmove 06:25:33 DEBUG] transformed W119Ma.SPC -> W119MA.SPC
[sigmove 06:25:33 DEBUG] transformed W119Mb.SPC -> W119MB.SPC
[sigmove 06:25:33 DEBUG] transformed W119Mc.SPC -> W119MC.SPC
[sigmove 06:25:33 DEBUG] transformed W119Md.SPC -> W119MD.SPC
[sigmove 06:25:33 DEBUG] transformed W119Me.SPC -> W119ME.SPC
[sigmove 06:25:33 DEBUG] transformed W119Mf.SPC -> W119MF.SPC
[Status 06:25:33 INFO] data for W119 transferred to science data processing
[Tidy 06:25:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:25:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:25:33 INFO] resetting WatchDogTimer
[Status 06:25:34 INFO] Starting Set [AERI set: name X119, 6 scans, 0 angle, D16300 command]
[Ingest 06:25:34 INFO] Sending XML status message
[Status 06:25:34 INFO] Mirror angle: 0
[Mirror 06:25:34 INFO] rotating to position X
[Status 06:25:34 INFO] .SET file for ACQ96 ready
[Ingest 06:25:34 INFO] Starting acquisition
[Status 06:25:34 INFO] reading housekeeping
[Status 06:25:52 INFO] acquire complete
[Status 06:25:53 INFO] writing housekeeping
[Sequencer 06:25:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:25:53 INFO] incremented X scene to 119 completed views
[Sequencer 06:25:53 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:25:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:25:53 INFO] incremented to [AERI set: name Y119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:25:53 INFO] X119.SIG(18)
[sigmove 06:25:53 DEBUG] transformed X119Ma.SPC -> X119MA.SPC
[sigmove 06:25:53 DEBUG] transformed X119Mb.SPC -> X119MB.SPC
[sigmove 06:25:53 DEBUG] transformed X119Mc.SPC -> X119MC.SPC
[sigmove 06:25:53 DEBUG] transformed X119Md.SPC -> X119MD.SPC
[sigmove 06:25:53 DEBUG] transformed X119Me.SPC -> X119ME.SPC
[sigmove 06:25:53 DEBUG] transformed X119Mf.SPC -> X119MF.SPC
[Status 06:25:53 INFO] data for X119 transferred to science data processing
[Tidy 06:25:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:25:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:25:53 INFO] resetting WatchDogTimer
[Status 06:25:53 INFO] Starting Set [AERI set: name Y119, 6 scans, 0 angle, D16300 command]
[Ingest 06:25:53 INFO] Sending XML status message
[Status 06:25:53 INFO] Mirror angle: 0
[Mirror 06:25:53 INFO] rotating to position Y
[Status 06:25:53 INFO] .SET file for ACQ96 ready
[Ingest 06:25:53 INFO] Starting acquisition
[Status 06:25:53 INFO] reading housekeeping
[Status 06:26:11 INFO] acquire complete
[Status 06:26:12 INFO] writing housekeeping
[Sequencer 06:26:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:26:12 INFO] incremented Y scene to 119 completed views
[Sequencer 06:26:12 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:26:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:26:12 INFO] incremented to [AERI set: name Z119, 6 scans, 0 angle, D16300 command] set
[sigmove 06:26:12 INFO] Y119.SIG(18)
[sigmove 06:26:12 DEBUG] transformed Y119Ma.SPC -> Y119MA.SPC
[sigmove 06:26:12 DEBUG] transformed Y119Mb.SPC -> Y119MB.SPC
[sigmove 06:26:12 DEBUG] transformed Y119Mc.SPC -> Y119MC.SPC
[sigmove 06:26:12 DEBUG] transformed Y119Md.SPC -> Y119MD.SPC
[sigmove 06:26:12 DEBUG] transformed Y119Me.SPC -> Y119ME.SPC
[sigmove 06:26:12 DEBUG] transformed Y119Mf.SPC -> Y119MF.SPC
[Status 06:26:12 INFO] data for Y119 transferred to science data processing
[Tidy 06:26:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:26:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:26:12 INFO] resetting WatchDogTimer
[Status 06:26:12 INFO] Starting Set [AERI set: name Z119, 6 scans, 0 angle, D16300 command]
[Ingest 06:26:12 INFO] Sending XML status message
[Status 06:26:12 INFO] Mirror angle: 0
[Mirror 06:26:12 INFO] rotating to position Z
[Status 06:26:12 INFO] .SET file for ACQ96 ready
[Ingest 06:26:12 INFO] Starting acquisition
[Status 06:26:13 INFO] reading housekeeping
[Status 06:26:30 INFO] acquire complete
[Status 06:26:31 INFO] writing housekeeping
[Sequencer 06:26:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:26:31 INFO] incremented Z scene to 119 completed views
[Sequencer 06:26:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:26:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:26:31 INFO] incremented to [AERI set: name A120, 6 scans, 120 angle, D28300 command] set
[sigmove 06:26:31 INFO] Z119.SIG(18)
[sigmove 06:26:31 DEBUG] transformed Z119Ma.SPC -> Z119MA.SPC
[sigmove 06:26:31 DEBUG] transformed Z119Mb.SPC -> Z119MB.SPC
[sigmove 06:26:31 DEBUG] transformed Z119Mc.SPC -> Z119MC.SPC
[sigmove 06:26:31 DEBUG] transformed Z119Md.SPC -> Z119MD.SPC
[sigmove 06:26:31 DEBUG] transformed Z119Me.SPC -> Z119ME.SPC
[sigmove 06:26:31 DEBUG] transformed Z119Mf.SPC -> Z119MF.SPC
[Status 06:26:31 INFO] data for Z119 transferred to science data processing
[Tidy 06:26:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:26:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:26:31 INFO] resetting WatchDogTimer
[Status 06:26:31 INFO] Starting Set [AERI set: name A120, 6 scans, 120 angle, D28300 command]
[Ingest 06:26:31 INFO] Sending XML status message
[Status 06:26:31 INFO] Mirror angle: 120
[Mirror 06:26:31 INFO] rotating to position A
[Status 06:26:32 INFO] .SET file for ACQ96 ready
[Ingest 06:26:33 INFO] Starting acquisition
[Status 06:26:33 INFO] reading housekeeping
[Status 06:26:50 INFO] acquire complete
[Status 06:26:51 INFO] writing housekeeping
[Sequencer 06:26:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:26:51 INFO] incremented A scene to 120 completed views
[Sequencer 06:26:51 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:26:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:26:51 INFO] incremented to [AERI set: name H120, 6 scans, 60 angle, D22500 command] set
[sigmove 06:26:51 INFO] A120.SIG(18)
[sigmove 06:26:51 DEBUG] transformed A120Ma.SPC -> A120MA.SPC
[sigmove 06:26:51 DEBUG] transformed A120Mb.SPC -> A120MB.SPC
[sigmove 06:26:51 DEBUG] transformed A120Mc.SPC -> A120MC.SPC
[sigmove 06:26:51 DEBUG] transformed A120Md.SPC -> A120MD.SPC
[sigmove 06:26:51 DEBUG] transformed A120Me.SPC -> A120ME.SPC
[sigmove 06:26:51 DEBUG] transformed A120Mf.SPC -> A120MF.SPC
[Status 06:26:51 INFO] data for A120 transferred to science data processing
[Tidy 06:26:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:26:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:26:51 INFO] resetting WatchDogTimer
[Status 06:26:51 INFO] Starting Set [AERI set: name H120, 6 scans, 60 angle, D22500 command]
[Ingest 06:26:51 INFO] Sending XML status message
[Status 06:26:51 INFO] Mirror angle: 60
[Mirror 06:26:51 INFO] rotating to position H
[Status 06:26:52 INFO] .SET file for ACQ96 ready
[Ingest 06:26:52 INFO] Starting acquisition
[Status 06:26:52 INFO] reading housekeeping
[Status 06:27:11 INFO] acquire complete
[Status 06:27:11 INFO] writing housekeeping
[Sequencer 06:27:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:27:11 INFO] incremented H scene to 120 completed views
[Sequencer 06:27:11 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:27:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:27:11 INFO] incremented to [AERI set: name S120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:27:11 INFO] H120.SIG(18)
[sigmove 06:27:11 DEBUG] transformed H120Ma.SPC -> H120MA.SPC
[sigmove 06:27:11 DEBUG] transformed H120Mb.SPC -> H120MB.SPC
[sigmove 06:27:11 DEBUG] transformed H120Mc.SPC -> H120MC.SPC
[sigmove 06:27:11 DEBUG] transformed H120Md.SPC -> H120MD.SPC
[sigmove 06:27:11 DEBUG] transformed H120Me.SPC -> H120ME.SPC
[sigmove 06:27:11 DEBUG] transformed H120Mf.SPC -> H120MF.SPC
[Status 06:27:11 INFO] data for H120 transferred to science data processing
[Tidy 06:27:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:27:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:27:11 INFO] resetting WatchDogTimer
[Status 06:27:11 INFO] Starting Set [AERI set: name S120, 6 scans, 0 angle, D16300 command]
[Ingest 06:27:11 INFO] Sending XML status message
[Status 06:27:11 INFO] Mirror angle: 0
[Mirror 06:27:11 INFO] rotating to position S
[Status 06:27:12 INFO] .SET file for ACQ96 ready
[Ingest 06:27:12 INFO] Starting acquisition
[Status 06:27:13 INFO] reading housekeeping
[Status 06:27:31 INFO] acquire complete
[Status 06:27:31 INFO] writing housekeeping
[Sequencer 06:27:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:27:31 INFO] incremented S scene to 120 completed views
[Sequencer 06:27:31 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:27:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:27:31 INFO] incremented to [AERI set: name T120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:27:31 INFO] S120.SIG(18)
[sigmove 06:27:31 DEBUG] transformed S120Ma.SPC -> S120MA.SPC
[sigmove 06:27:31 DEBUG] transformed S120Mb.SPC -> S120MB.SPC
[sigmove 06:27:31 DEBUG] transformed S120Mc.SPC -> S120MC.SPC
[sigmove 06:27:31 DEBUG] transformed S120Md.SPC -> S120MD.SPC
[sigmove 06:27:31 DEBUG] transformed S120Me.SPC -> S120ME.SPC
[sigmove 06:27:31 DEBUG] transformed S120Mf.SPC -> S120MF.SPC
[Status 06:27:31 INFO] data for S120 transferred to science data processing
[Tidy 06:27:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:27:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:27:31 INFO] resetting WatchDogTimer
[Status 06:27:31 INFO] Starting Set [AERI set: name T120, 6 scans, 0 angle, D16300 command]
[Ingest 06:27:31 INFO] Sending XML status message
[Status 06:27:31 INFO] Mirror angle: 0
[Mirror 06:27:32 INFO] rotating to position T
[Status 06:27:32 INFO] .SET file for ACQ96 ready
[Ingest 06:27:32 INFO] Starting acquisition
[Status 06:27:32 INFO] reading housekeeping
[Status 06:27:50 INFO] acquire complete
[Status 06:27:50 INFO] writing housekeeping
[Sequencer 06:27:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:27:50 INFO] incremented T scene to 120 completed views
[Sequencer 06:27:50 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:27:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:27:50 INFO] incremented to [AERI set: name U120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:27:50 INFO] T120.SIG(18)
[sigmove 06:27:50 DEBUG] transformed T120Ma.SPC -> T120MA.SPC
[sigmove 06:27:50 DEBUG] transformed T120Mb.SPC -> T120MB.SPC
[sigmove 06:27:50 DEBUG] transformed T120Mc.SPC -> T120MC.SPC
[sigmove 06:27:50 DEBUG] transformed T120Md.SPC -> T120MD.SPC
[sigmove 06:27:50 DEBUG] transformed T120Me.SPC -> T120ME.SPC
[sigmove 06:27:50 DEBUG] transformed T120Mf.SPC -> T120MF.SPC
[Status 06:27:50 INFO] data for T120 transferred to science data processing
[Tidy 06:27:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:27:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:27:50 INFO] resetting WatchDogTimer
[Status 06:27:51 INFO] Starting Set [AERI set: name U120, 6 scans, 0 angle, D16300 command]
[Ingest 06:27:51 INFO] Sending XML status message
[Status 06:27:51 INFO] Mirror angle: 0
[Mirror 06:27:51 INFO] rotating to position U
[Status 06:27:51 INFO] .SET file for ACQ96 ready
[Ingest 06:27:51 INFO] Starting acquisition
[Status 06:27:51 INFO] reading housekeeping
[Status 06:28:09 INFO] acquire complete
[Status 06:28:09 INFO] writing housekeeping
[Sequencer 06:28:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:28:09 INFO] incremented U scene to 120 completed views
[Sequencer 06:28:09 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:28:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:28:09 INFO] incremented to [AERI set: name V120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:28:09 INFO] U120.SIG(18)
[sigmove 06:28:09 DEBUG] transformed U120Ma.SPC -> U120MA.SPC
[sigmove 06:28:10 DEBUG] transformed U120Mb.SPC -> U120MB.SPC
[sigmove 06:28:10 DEBUG] transformed U120Mc.SPC -> U120MC.SPC
[sigmove 06:28:10 DEBUG] transformed U120Md.SPC -> U120MD.SPC
[sigmove 06:28:10 DEBUG] transformed U120Me.SPC -> U120ME.SPC
[sigmove 06:28:10 DEBUG] transformed U120Mf.SPC -> U120MF.SPC
[Status 06:28:10 INFO] data for U120 transferred to science data processing
[Tidy 06:28:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:28:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:28:10 INFO] resetting WatchDogTimer
[Status 06:28:10 INFO] Starting Set [AERI set: name V120, 6 scans, 0 angle, D16300 command]
[Ingest 06:28:10 INFO] Sending XML status message
[Status 06:28:10 INFO] Mirror angle: 0
[Mirror 06:28:10 INFO] rotating to position V
[Status 06:28:10 INFO] .SET file for ACQ96 ready
[Ingest 06:28:10 INFO] Starting acquisition
[Status 06:28:10 INFO] reading housekeeping
[Status 06:28:28 INFO] acquire complete
[Status 06:28:29 INFO] writing housekeeping
[Sequencer 06:28:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:28:29 INFO] incremented V scene to 120 completed views
[Sequencer 06:28:29 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:28:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:28:29 INFO] incremented to [AERI set: name W120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:28:29 INFO] V120.SIG(18)
[sigmove 06:28:29 DEBUG] transformed V120Ma.SPC -> V120MA.SPC
[sigmove 06:28:29 DEBUG] transformed V120Mb.SPC -> V120MB.SPC
[sigmove 06:28:29 DEBUG] transformed V120Mc.SPC -> V120MC.SPC
[sigmove 06:28:29 DEBUG] transformed V120Md.SPC -> V120MD.SPC
[sigmove 06:28:29 DEBUG] transformed V120Me.SPC -> V120ME.SPC
[sigmove 06:28:29 DEBUG] transformed V120Mf.SPC -> V120MF.SPC
[Status 06:28:29 INFO] data for V120 transferred to science data processing
[Tidy 06:28:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:28:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:28:29 INFO] resetting WatchDogTimer
[Status 06:28:29 INFO] Starting Set [AERI set: name W120, 6 scans, 0 angle, D16300 command]
[Ingest 06:28:29 INFO] Sending XML status message
[Status 06:28:29 INFO] Mirror angle: 0
[Mirror 06:28:29 INFO] rotating to position W
[Status 06:28:29 INFO] .SET file for ACQ96 ready
[Ingest 06:28:29 INFO] Starting acquisition
[Status 06:28:30 INFO] reading housekeeping
[Status 06:28:52 INFO] acquire complete
[Status 06:28:52 INFO] writing housekeeping
[Sequencer 06:28:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:28:52 INFO] incremented W scene to 120 completed views
[Sequencer 06:28:52 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:28:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:28:52 INFO] incremented to [AERI set: name X120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:28:52 INFO] W120.SIG(18)
[sigmove 06:28:52 DEBUG] transformed W120Ma.SPC -> W120MA.SPC
[sigmove 06:28:52 DEBUG] transformed W120Mb.SPC -> W120MB.SPC
[sigmove 06:28:52 DEBUG] transformed W120Mc.SPC -> W120MC.SPC
[sigmove 06:28:52 DEBUG] transformed W120Md.SPC -> W120MD.SPC
[sigmove 06:28:52 DEBUG] transformed W120Me.SPC -> W120ME.SPC
[sigmove 06:28:52 DEBUG] transformed W120Mf.SPC -> W120MF.SPC
[Status 06:28:52 INFO] data for W120 transferred to science data processing
[Tidy 06:28:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:28:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:28:52 INFO] resetting WatchDogTimer
[Status 06:28:52 INFO] Starting Set [AERI set: name X120, 6 scans, 0 angle, D16300 command]
[Ingest 06:28:52 INFO] Sending XML status message
[Status 06:28:52 INFO] Mirror angle: 0
[Mirror 06:28:53 INFO] rotating to position X
[Status 06:28:53 INFO] .SET file for ACQ96 ready
[Ingest 06:28:53 INFO] Starting acquisition
[Status 06:28:53 INFO] reading housekeeping
[Status 06:29:11 INFO] acquire complete
[Status 06:29:11 INFO] writing housekeeping
[Sequencer 06:29:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:29:11 INFO] incremented X scene to 120 completed views
[Sequencer 06:29:11 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:29:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:29:11 INFO] incremented to [AERI set: name Y120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:29:11 INFO] X120.SIG(18)
[sigmove 06:29:11 DEBUG] transformed X120Ma.SPC -> X120MA.SPC
[sigmove 06:29:11 DEBUG] transformed X120Mb.SPC -> X120MB.SPC
[sigmove 06:29:11 DEBUG] transformed X120Mc.SPC -> X120MC.SPC
[sigmove 06:29:11 DEBUG] transformed X120Md.SPC -> X120MD.SPC
[sigmove 06:29:11 DEBUG] transformed X120Me.SPC -> X120ME.SPC
[sigmove 06:29:11 DEBUG] transformed X120Mf.SPC -> X120MF.SPC
[Status 06:29:11 INFO] data for X120 transferred to science data processing
[Tidy 06:29:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:29:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:29:11 INFO] resetting WatchDogTimer
[Status 06:29:11 INFO] Starting Set [AERI set: name Y120, 6 scans, 0 angle, D16300 command]
[Ingest 06:29:11 INFO] Sending XML status message
[Status 06:29:11 INFO] Mirror angle: 0
[Mirror 06:29:12 INFO] rotating to position Y
[Status 06:29:12 INFO] .SET file for ACQ96 ready
[Ingest 06:29:12 INFO] Starting acquisition
[Status 06:29:12 INFO] reading housekeeping
[Status 06:29:30 INFO] acquire complete
[Status 06:29:30 INFO] writing housekeeping
[Sequencer 06:29:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:29:30 INFO] incremented Y scene to 120 completed views
[Sequencer 06:29:30 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:29:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:29:30 INFO] incremented to [AERI set: name Z120, 6 scans, 0 angle, D16300 command] set
[sigmove 06:29:30 INFO] Y120.SIG(18)
[sigmove 06:29:30 DEBUG] transformed Y120Ma.SPC -> Y120MA.SPC
[sigmove 06:29:30 DEBUG] transformed Y120Mb.SPC -> Y120MB.SPC
[sigmove 06:29:30 DEBUG] transformed Y120Mc.SPC -> Y120MC.SPC
[sigmove 06:29:30 DEBUG] transformed Y120Md.SPC -> Y120MD.SPC
[sigmove 06:29:30 DEBUG] transformed Y120Me.SPC -> Y120ME.SPC
[sigmove 06:29:30 DEBUG] transformed Y120Mf.SPC -> Y120MF.SPC
[Status 06:29:30 INFO] data for Y120 transferred to science data processing
[Tidy 06:29:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:29:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:29:30 INFO] resetting WatchDogTimer
[Status 06:29:31 INFO] Starting Set [AERI set: name Z120, 6 scans, 0 angle, D16300 command]
[Ingest 06:29:31 INFO] Sending XML status message
[Status 06:29:31 INFO] Mirror angle: 0
[Mirror 06:29:31 INFO] rotating to position Z
[Status 06:29:31 INFO] .SET file for ACQ96 ready
[Ingest 06:29:31 INFO] Starting acquisition
[Status 06:29:31 INFO] reading housekeeping
[Status 06:29:49 INFO] acquire complete
[Status 06:29:49 INFO] writing housekeeping
[Sequencer 06:29:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:29:49 INFO] incremented Z scene to 120 completed views
[Sequencer 06:29:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:29:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:29:49 INFO] incremented to [AERI set: name H121, 6 scans, 60 angle, D22500 command] set
[sigmove 06:29:49 INFO] Z120.SIG(18)
[sigmove 06:29:49 DEBUG] transformed Z120Ma.SPC -> Z120MA.SPC
[sigmove 06:29:49 DEBUG] transformed Z120Mb.SPC -> Z120MB.SPC
[sigmove 06:29:49 DEBUG] transformed Z120Mc.SPC -> Z120MC.SPC
[sigmove 06:29:49 DEBUG] transformed Z120Md.SPC -> Z120MD.SPC
[sigmove 06:29:49 DEBUG] transformed Z120Me.SPC -> Z120ME.SPC
[sigmove 06:29:49 DEBUG] transformed Z120Mf.SPC -> Z120MF.SPC
[Status 06:29:49 INFO] data for Z120 transferred to science data processing
[Tidy 06:29:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:29:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:29:49 INFO] resetting WatchDogTimer
[Status 06:29:50 INFO] Starting Set [AERI set: name H121, 6 scans, 60 angle, D22500 command]
[Ingest 06:29:50 INFO] Sending XML status message
[Status 06:29:50 INFO] Mirror angle: 60
[Mirror 06:29:50 INFO] rotating to position H
[Status 06:29:51 INFO] .SET file for ACQ96 ready
[Ingest 06:29:51 INFO] Starting acquisition
[Status 06:29:51 INFO] reading housekeeping
[Status 06:30:09 INFO] acquire complete
[Status 06:30:10 INFO] writing housekeeping
[Sequencer 06:30:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:30:10 INFO] incremented H scene to 121 completed views
[Sequencer 06:30:10 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:30:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:30:10 INFO] incremented to [AERI set: name A121, 6 scans, 120 angle, D28300 command] set
[sigmove 06:30:10 INFO] H121.SIG(18)
[sigmove 06:30:10 DEBUG] transformed H121Ma.SPC -> H121MA.SPC
[sigmove 06:30:10 DEBUG] transformed H121Mb.SPC -> H121MB.SPC
[sigmove 06:30:10 DEBUG] transformed H121Mc.SPC -> H121MC.SPC
[sigmove 06:30:10 DEBUG] transformed H121Md.SPC -> H121MD.SPC
[sigmove 06:30:10 DEBUG] transformed H121Me.SPC -> H121ME.SPC
[sigmove 06:30:10 DEBUG] transformed H121Mf.SPC -> H121MF.SPC
[Status 06:30:10 INFO] data for H121 transferred to science data processing
[Tidy 06:30:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:30:10 INFO] A119.FIN(19),H119.FIN(19),S119.FIN(19),T119.FIN(19),U119.FIN(19),V119.FIN(19),W119.FIN(19),X119.FIN(19),Y119.FIN(19),Z119.FIN(19),A120.FIN(19),H120.FIN(19),S120.FIN(19),T120.FIN(19),U120.FIN(19),V120.FIN(19),W120.FIN(19),X120.FIN(19),Y120.FIN(19),Z120.FIN(19)
[sigmove 06:30:10 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:30:10 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:30:12 DEBUG] done zipping
[WatchDog 06:30:12 INFO] resetting WatchDogTimer
[Status 06:30:12 INFO] Starting Set [AERI set: name A121, 6 scans, 120 angle, D28300 command]
[Ingest 06:30:12 INFO] Sending XML status message
[Status 06:30:12 INFO] Mirror angle: 120
[Mirror 06:30:12 INFO] rotating to position A
[Status 06:30:13 INFO] .SET file for ACQ96 ready
[Ingest 06:30:13 INFO] Starting acquisition
[Status 06:30:14 INFO] reading housekeeping
[Status 06:30:32 INFO] acquire complete
[Status 06:30:32 INFO] writing housekeeping
[Sequencer 06:30:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:30:32 INFO] incremented A scene to 121 completed views
[Sequencer 06:30:32 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:30:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:30:32 INFO] incremented to [AERI set: name S121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:30:32 INFO] A121.SIG(18)
[sigmove 06:30:32 DEBUG] transformed A121Ma.SPC -> A121MA.SPC
[sigmove 06:30:32 DEBUG] transformed A121Mb.SPC -> A121MB.SPC
[sigmove 06:30:32 DEBUG] transformed A121Mc.SPC -> A121MC.SPC
[sigmove 06:30:32 DEBUG] transformed A121Md.SPC -> A121MD.SPC
[sigmove 06:30:32 DEBUG] transformed A121Me.SPC -> A121ME.SPC
[sigmove 06:30:32 DEBUG] transformed A121Mf.SPC -> A121MF.SPC
[Status 06:30:32 INFO] data for A121 transferred to science data processing
[Tidy 06:30:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:30:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:30:32 INFO] resetting WatchDogTimer
[Status 06:30:32 INFO] Starting Set [AERI set: name S121, 6 scans, 0 angle, D16300 command]
[Ingest 06:30:32 INFO] Sending XML status message
[Status 06:30:32 INFO] Mirror angle: 0
[Mirror 06:30:32 INFO] rotating to position S
[Status 06:30:34 INFO] .SET file for ACQ96 ready
[Ingest 06:30:34 INFO] Starting acquisition
[Status 06:30:34 INFO] reading housekeeping
[Status 06:30:52 INFO] acquire complete
[Status 06:30:52 INFO] writing housekeeping
[Sequencer 06:30:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:30:52 INFO] incremented S scene to 121 completed views
[Sequencer 06:30:52 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:30:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:30:52 INFO] incremented to [AERI set: name T121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:30:52 INFO] S121.SIG(18)
[sigmove 06:30:52 DEBUG] transformed S121Ma.SPC -> S121MA.SPC
[sigmove 06:30:52 DEBUG] transformed S121Mb.SPC -> S121MB.SPC
[sigmove 06:30:52 DEBUG] transformed S121Mc.SPC -> S121MC.SPC
[sigmove 06:30:52 DEBUG] transformed S121Md.SPC -> S121MD.SPC
[sigmove 06:30:52 DEBUG] transformed S121Me.SPC -> S121ME.SPC
[sigmove 06:30:52 DEBUG] transformed S121Mf.SPC -> S121MF.SPC
[Status 06:30:52 INFO] data for S121 transferred to science data processing
[Tidy 06:30:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:30:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:30:52 INFO] resetting WatchDogTimer
[Status 06:30:53 INFO] Starting Set [AERI set: name T121, 6 scans, 0 angle, D16300 command]
[Ingest 06:30:53 INFO] Sending XML status message
[Status 06:30:53 INFO] Mirror angle: 0
[Mirror 06:30:53 INFO] rotating to position T
[Status 06:30:53 INFO] .SET file for ACQ96 ready
[Ingest 06:30:53 INFO] Starting acquisition
[Status 06:30:53 INFO] reading housekeeping
[Status 06:31:11 INFO] acquire complete
[Status 06:31:11 INFO] writing housekeeping
[Sequencer 06:31:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:31:11 INFO] incremented T scene to 121 completed views
[Sequencer 06:31:11 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:31:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:31:11 INFO] incremented to [AERI set: name U121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:31:11 INFO] T121.SIG(18)
[sigmove 06:31:11 DEBUG] transformed T121Ma.SPC -> T121MA.SPC
[sigmove 06:31:11 DEBUG] transformed T121Mb.SPC -> T121MB.SPC
[sigmove 06:31:11 DEBUG] transformed T121Mc.SPC -> T121MC.SPC
[sigmove 06:31:11 DEBUG] transformed T121Md.SPC -> T121MD.SPC
[sigmove 06:31:11 DEBUG] transformed T121Me.SPC -> T121ME.SPC
[sigmove 06:31:11 DEBUG] transformed T121Mf.SPC -> T121MF.SPC
[Status 06:31:11 INFO] data for T121 transferred to science data processing
[Tidy 06:31:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:31:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:31:11 INFO] resetting WatchDogTimer
[Status 06:31:12 INFO] Starting Set [AERI set: name U121, 6 scans, 0 angle, D16300 command]
[Ingest 06:31:12 INFO] Sending XML status message
[Status 06:31:12 INFO] Mirror angle: 0
[Mirror 06:31:12 INFO] rotating to position U
[Status 06:31:12 INFO] .SET file for ACQ96 ready
[Ingest 06:31:12 INFO] Starting acquisition
[Status 06:31:12 INFO] reading housekeeping
[Status 06:31:30 INFO] acquire complete
[Status 06:31:30 INFO] writing housekeeping
[Sequencer 06:31:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:31:30 INFO] incremented U scene to 121 completed views
[Sequencer 06:31:30 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:31:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:31:30 INFO] incremented to [AERI set: name V121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:31:30 INFO] U121.SIG(18)
[sigmove 06:31:30 DEBUG] transformed U121Ma.SPC -> U121MA.SPC
[sigmove 06:31:30 DEBUG] transformed U121Mb.SPC -> U121MB.SPC
[sigmove 06:31:30 DEBUG] transformed U121Mc.SPC -> U121MC.SPC
[sigmove 06:31:30 DEBUG] transformed U121Md.SPC -> U121MD.SPC
[sigmove 06:31:30 DEBUG] transformed U121Me.SPC -> U121ME.SPC
[sigmove 06:31:30 DEBUG] transformed U121Mf.SPC -> U121MF.SPC
[Status 06:31:30 INFO] data for U121 transferred to science data processing
[Tidy 06:31:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:31:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:31:30 INFO] resetting WatchDogTimer
[Status 06:31:31 INFO] Starting Set [AERI set: name V121, 6 scans, 0 angle, D16300 command]
[Ingest 06:31:31 INFO] Sending XML status message
[Status 06:31:31 INFO] Mirror angle: 0
[Mirror 06:31:31 INFO] rotating to position V
[Status 06:31:31 INFO] .SET file for ACQ96 ready
[Ingest 06:31:31 INFO] Starting acquisition
[Status 06:31:31 INFO] reading housekeeping
[Status 06:31:49 INFO] acquire complete
[Status 06:31:50 INFO] writing housekeeping
[Sequencer 06:31:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:31:50 INFO] incremented V scene to 121 completed views
[Sequencer 06:31:50 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:31:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:31:50 INFO] incremented to [AERI set: name W121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:31:50 INFO] V121.SIG(18)
[sigmove 06:31:50 DEBUG] transformed V121Ma.SPC -> V121MA.SPC
[sigmove 06:31:50 DEBUG] transformed V121Mb.SPC -> V121MB.SPC
[sigmove 06:31:50 DEBUG] transformed V121Mc.SPC -> V121MC.SPC
[sigmove 06:31:50 DEBUG] transformed V121Md.SPC -> V121MD.SPC
[sigmove 06:31:50 DEBUG] transformed V121Me.SPC -> V121ME.SPC
[sigmove 06:31:50 DEBUG] transformed V121Mf.SPC -> V121MF.SPC
[Status 06:31:50 INFO] data for V121 transferred to science data processing
[Tidy 06:31:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:31:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:31:50 INFO] resetting WatchDogTimer
[Status 06:31:50 INFO] Starting Set [AERI set: name W121, 6 scans, 0 angle, D16300 command]
[Ingest 06:31:50 INFO] Sending XML status message
[Status 06:31:50 INFO] Mirror angle: 0
[Mirror 06:31:50 INFO] rotating to position W
[Status 06:31:50 INFO] .SET file for ACQ96 ready
[Ingest 06:31:50 INFO] Starting acquisition
[Status 06:31:50 INFO] reading housekeeping
[Status 06:32:08 INFO] acquire complete
[Status 06:32:09 INFO] writing housekeeping
[Sequencer 06:32:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:32:09 INFO] incremented W scene to 121 completed views
[Sequencer 06:32:09 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:32:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:32:09 INFO] incremented to [AERI set: name X121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:32:09 INFO] W121.SIG(18)
[sigmove 06:32:09 DEBUG] transformed W121Ma.SPC -> W121MA.SPC
[sigmove 06:32:09 DEBUG] transformed W121Mb.SPC -> W121MB.SPC
[sigmove 06:32:09 DEBUG] transformed W121Mc.SPC -> W121MC.SPC
[sigmove 06:32:09 DEBUG] transformed W121Md.SPC -> W121MD.SPC
[sigmove 06:32:09 DEBUG] transformed W121Me.SPC -> W121ME.SPC
[sigmove 06:32:09 DEBUG] transformed W121Mf.SPC -> W121MF.SPC
[Status 06:32:09 INFO] data for W121 transferred to science data processing
[Tidy 06:32:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:32:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:32:09 INFO] resetting WatchDogTimer
[Status 06:32:09 INFO] Starting Set [AERI set: name X121, 6 scans, 0 angle, D16300 command]
[Ingest 06:32:09 INFO] Sending XML status message
[Status 06:32:09 INFO] Mirror angle: 0
[Mirror 06:32:09 INFO] rotating to position X
[Status 06:32:09 INFO] .SET file for ACQ96 ready
[Ingest 06:32:09 INFO] Starting acquisition
[Status 06:32:10 INFO] reading housekeeping
[Status 06:32:27 INFO] acquire complete
[Status 06:32:28 INFO] writing housekeeping
[Sequencer 06:32:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:32:28 INFO] incremented X scene to 121 completed views
[Sequencer 06:32:28 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:32:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:32:28 INFO] incremented to [AERI set: name Y121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:32:28 INFO] X121.SIG(18)
[sigmove 06:32:28 DEBUG] transformed X121Ma.SPC -> X121MA.SPC
[sigmove 06:32:28 DEBUG] transformed X121Mb.SPC -> X121MB.SPC
[sigmove 06:32:28 DEBUG] transformed X121Mc.SPC -> X121MC.SPC
[sigmove 06:32:28 DEBUG] transformed X121Md.SPC -> X121MD.SPC
[sigmove 06:32:28 DEBUG] transformed X121Me.SPC -> X121ME.SPC
[sigmove 06:32:28 DEBUG] transformed X121Mf.SPC -> X121MF.SPC
[Status 06:32:28 INFO] data for X121 transferred to science data processing
[Tidy 06:32:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:32:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:32:28 INFO] resetting WatchDogTimer
[Status 06:32:28 INFO] Starting Set [AERI set: name Y121, 6 scans, 0 angle, D16300 command]
[Ingest 06:32:28 INFO] Sending XML status message
[Status 06:32:28 INFO] Mirror angle: 0
[Mirror 06:32:28 INFO] rotating to position Y
[Status 06:32:28 INFO] .SET file for ACQ96 ready
[Ingest 06:32:29 INFO] Starting acquisition
[Status 06:32:29 INFO] reading housekeeping
[Status 06:32:46 INFO] acquire complete
[Status 06:32:47 INFO] writing housekeeping
[Sequencer 06:32:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:32:47 INFO] incremented Y scene to 121 completed views
[Sequencer 06:32:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:32:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:32:47 INFO] incremented to [AERI set: name Z121, 6 scans, 0 angle, D16300 command] set
[sigmove 06:32:47 INFO] Y121.SIG(18)
[sigmove 06:32:47 DEBUG] transformed Y121Ma.SPC -> Y121MA.SPC
[sigmove 06:32:47 DEBUG] transformed Y121Mb.SPC -> Y121MB.SPC
[sigmove 06:32:47 DEBUG] transformed Y121Mc.SPC -> Y121MC.SPC
[sigmove 06:32:47 DEBUG] transformed Y121Md.SPC -> Y121MD.SPC
[sigmove 06:32:47 DEBUG] transformed Y121Me.SPC -> Y121ME.SPC
[sigmove 06:32:47 DEBUG] transformed Y121Mf.SPC -> Y121MF.SPC
[Status 06:32:47 INFO] data for Y121 transferred to science data processing
[Tidy 06:32:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:32:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:32:47 INFO] resetting WatchDogTimer
[Status 06:32:47 INFO] Starting Set [AERI set: name Z121, 6 scans, 0 angle, D16300 command]
[Ingest 06:32:47 INFO] Sending XML status message
[Status 06:32:47 INFO] Mirror angle: 0
[Mirror 06:32:47 INFO] rotating to position Z
[Status 06:32:47 INFO] .SET file for ACQ96 ready
[Ingest 06:32:48 INFO] Starting acquisition
[Status 06:32:48 INFO] reading housekeeping
[Status 06:33:05 INFO] acquire complete
[Status 06:33:06 INFO] writing housekeeping
[Sequencer 06:33:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:33:06 INFO] incremented Z scene to 121 completed views
[Sequencer 06:33:06 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:33:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:33:06 INFO] incremented to [AERI set: name A122, 6 scans, 120 angle, D28300 command] set
[sigmove 06:33:06 INFO] Z121.SIG(18)
[sigmove 06:33:06 DEBUG] transformed Z121Ma.SPC -> Z121MA.SPC
[sigmove 06:33:06 DEBUG] transformed Z121Mb.SPC -> Z121MB.SPC
[sigmove 06:33:06 DEBUG] transformed Z121Mc.SPC -> Z121MC.SPC
[sigmove 06:33:06 DEBUG] transformed Z121Md.SPC -> Z121MD.SPC
[sigmove 06:33:06 DEBUG] transformed Z121Me.SPC -> Z121ME.SPC
[sigmove 06:33:06 DEBUG] transformed Z121Mf.SPC -> Z121MF.SPC
[Status 06:33:06 INFO] data for Z121 transferred to science data processing
[Tidy 06:33:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:33:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:33:06 INFO] resetting WatchDogTimer
[Status 06:33:06 INFO] Starting Set [AERI set: name A122, 6 scans, 120 angle, D28300 command]
[Ingest 06:33:06 INFO] Sending XML status message
[Status 06:33:06 INFO] Mirror angle: 120
[Mirror 06:33:06 INFO] rotating to position A
[Status 06:33:08 INFO] .SET file for ACQ96 ready
[Ingest 06:33:08 INFO] Starting acquisition
[Status 06:33:08 INFO] reading housekeeping
[Status 06:33:26 INFO] acquire complete
[Status 06:33:26 INFO] writing housekeeping
[Sequencer 06:33:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:33:26 INFO] incremented A scene to 122 completed views
[Sequencer 06:33:26 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:33:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:33:26 INFO] incremented to [AERI set: name H122, 6 scans, 60 angle, D22500 command] set
[sigmove 06:33:26 INFO] A122.SIG(18)
[sigmove 06:33:26 DEBUG] transformed A122Ma.SPC -> A122MA.SPC
[sigmove 06:33:26 DEBUG] transformed A122Mb.SPC -> A122MB.SPC
[sigmove 06:33:26 DEBUG] transformed A122Mc.SPC -> A122MC.SPC
[sigmove 06:33:26 DEBUG] transformed A122Md.SPC -> A122MD.SPC
[sigmove 06:33:26 DEBUG] transformed A122Me.SPC -> A122ME.SPC
[sigmove 06:33:26 DEBUG] transformed A122Mf.SPC -> A122MF.SPC
[Status 06:33:26 INFO] data for A122 transferred to science data processing
[Tidy 06:33:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:33:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:33:26 INFO] resetting WatchDogTimer
[Status 06:33:26 INFO] Starting Set [AERI set: name H122, 6 scans, 60 angle, D22500 command]
[Ingest 06:33:26 INFO] Sending XML status message
[Status 06:33:26 INFO] Mirror angle: 60
[Mirror 06:33:26 INFO] rotating to position H
[Status 06:33:27 INFO] .SET file for ACQ96 ready
[Ingest 06:33:27 INFO] Starting acquisition
[Status 06:33:28 INFO] reading housekeeping
[Status 06:33:46 INFO] acquire complete
[Status 06:33:46 INFO] writing housekeeping
[Sequencer 06:33:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:33:46 INFO] incremented H scene to 122 completed views
[Sequencer 06:33:46 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:33:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:33:46 INFO] incremented to [AERI set: name S122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:33:46 INFO] H122.SIG(18)
[sigmove 06:33:46 DEBUG] transformed H122Ma.SPC -> H122MA.SPC
[sigmove 06:33:46 DEBUG] transformed H122Mb.SPC -> H122MB.SPC
[sigmove 06:33:46 DEBUG] transformed H122Mc.SPC -> H122MC.SPC
[sigmove 06:33:46 DEBUG] transformed H122Md.SPC -> H122MD.SPC
[sigmove 06:33:46 DEBUG] transformed H122Me.SPC -> H122ME.SPC
[sigmove 06:33:46 DEBUG] transformed H122Mf.SPC -> H122MF.SPC
[Status 06:33:46 INFO] data for H122 transferred to science data processing
[Tidy 06:33:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:33:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:33:46 INFO] resetting WatchDogTimer
[Status 06:33:46 INFO] Starting Set [AERI set: name S122, 6 scans, 0 angle, D16300 command]
[Ingest 06:33:46 INFO] Sending XML status message
[Status 06:33:46 INFO] Mirror angle: 0
[Mirror 06:33:47 INFO] rotating to position S
[Status 06:33:47 INFO] .SET file for ACQ96 ready
[Ingest 06:33:48 INFO] Starting acquisition
[Status 06:33:48 INFO] reading housekeeping
[Status 06:34:06 INFO] acquire complete
[Status 06:34:07 INFO] writing housekeeping
[Sequencer 06:34:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:34:07 INFO] incremented S scene to 122 completed views
[Sequencer 06:34:07 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:34:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:34:07 INFO] incremented to [AERI set: name T122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:34:07 INFO] S122.SIG(18)
[sigmove 06:34:07 DEBUG] transformed S122Ma.SPC -> S122MA.SPC
[sigmove 06:34:07 DEBUG] transformed S122Mb.SPC -> S122MB.SPC
[sigmove 06:34:07 DEBUG] transformed S122Mc.SPC -> S122MC.SPC
[sigmove 06:34:07 DEBUG] transformed S122Md.SPC -> S122MD.SPC
[sigmove 06:34:07 DEBUG] transformed S122Me.SPC -> S122ME.SPC
[sigmove 06:34:07 DEBUG] transformed S122Mf.SPC -> S122MF.SPC
[Status 06:34:07 INFO] data for S122 transferred to science data processing
[Tidy 06:34:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:34:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:34:07 INFO] resetting WatchDogTimer
[Status 06:34:07 INFO] Starting Set [AERI set: name T122, 6 scans, 0 angle, D16300 command]
[Ingest 06:34:07 INFO] Sending XML status message
[Status 06:34:07 INFO] Mirror angle: 0
[Mirror 06:34:07 INFO] rotating to position T
[Status 06:34:07 INFO] .SET file for ACQ96 ready
[Ingest 06:34:07 INFO] Starting acquisition
[Status 06:34:07 INFO] reading housekeeping
[Status 06:34:25 INFO] acquire complete
[Status 06:34:26 INFO] writing housekeeping
[Sequencer 06:34:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:34:26 INFO] incremented T scene to 122 completed views
[Sequencer 06:34:26 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:34:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:34:26 INFO] incremented to [AERI set: name U122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:34:26 INFO] T122.SIG(18)
[sigmove 06:34:26 DEBUG] transformed T122Ma.SPC -> T122MA.SPC
[sigmove 06:34:26 DEBUG] transformed T122Mb.SPC -> T122MB.SPC
[sigmove 06:34:26 DEBUG] transformed T122Mc.SPC -> T122MC.SPC
[sigmove 06:34:26 DEBUG] transformed T122Md.SPC -> T122MD.SPC
[sigmove 06:34:26 DEBUG] transformed T122Me.SPC -> T122ME.SPC
[sigmove 06:34:26 DEBUG] transformed T122Mf.SPC -> T122MF.SPC
[Status 06:34:26 INFO] data for T122 transferred to science data processing
[Tidy 06:34:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:34:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:34:26 INFO] resetting WatchDogTimer
[Status 06:34:26 INFO] Starting Set [AERI set: name U122, 6 scans, 0 angle, D16300 command]
[Ingest 06:34:26 INFO] Sending XML status message
[Status 06:34:26 INFO] Mirror angle: 0
[Mirror 06:34:26 INFO] rotating to position U
[Status 06:34:26 INFO] .SET file for ACQ96 ready
[Ingest 06:34:26 INFO] Starting acquisition
[Status 06:34:27 INFO] reading housekeeping
[Status 06:34:44 INFO] acquire complete
[Status 06:34:45 INFO] writing housekeeping
[Sequencer 06:34:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:34:45 INFO] incremented U scene to 122 completed views
[Sequencer 06:34:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:34:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:34:45 INFO] incremented to [AERI set: name V122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:34:45 INFO] U122.SIG(18)
[sigmove 06:34:45 DEBUG] transformed U122Ma.SPC -> U122MA.SPC
[sigmove 06:34:45 DEBUG] transformed U122Mb.SPC -> U122MB.SPC
[sigmove 06:34:45 DEBUG] transformed U122Mc.SPC -> U122MC.SPC
[sigmove 06:34:45 DEBUG] transformed U122Md.SPC -> U122MD.SPC
[sigmove 06:34:45 DEBUG] transformed U122Me.SPC -> U122ME.SPC
[sigmove 06:34:45 DEBUG] transformed U122Mf.SPC -> U122MF.SPC
[Status 06:34:45 INFO] data for U122 transferred to science data processing
[Tidy 06:34:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:34:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:34:45 INFO] resetting WatchDogTimer
[Status 06:34:45 INFO] Starting Set [AERI set: name V122, 6 scans, 0 angle, D16300 command]
[Ingest 06:34:45 INFO] Sending XML status message
[Status 06:34:45 INFO] Mirror angle: 0
[Mirror 06:34:45 INFO] rotating to position V
[Status 06:34:45 INFO] .SET file for ACQ96 ready
[Ingest 06:34:45 INFO] Starting acquisition
[Status 06:34:46 INFO] reading housekeeping
[Status 06:35:03 INFO] acquire complete
[Status 06:35:04 INFO] writing housekeeping
[Sequencer 06:35:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:35:04 INFO] incremented V scene to 122 completed views
[Sequencer 06:35:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:35:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:35:04 INFO] incremented to [AERI set: name W122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:35:04 INFO] V122.SIG(18)
[sigmove 06:35:04 DEBUG] transformed V122Ma.SPC -> V122MA.SPC
[sigmove 06:35:04 DEBUG] transformed V122Mb.SPC -> V122MB.SPC
[sigmove 06:35:04 DEBUG] transformed V122Mc.SPC -> V122MC.SPC
[sigmove 06:35:04 DEBUG] transformed V122Md.SPC -> V122MD.SPC
[sigmove 06:35:04 DEBUG] transformed V122Me.SPC -> V122ME.SPC
[sigmove 06:35:04 DEBUG] transformed V122Mf.SPC -> V122MF.SPC
[Status 06:35:04 INFO] data for V122 transferred to science data processing
[Tidy 06:35:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:35:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:35:04 INFO] resetting WatchDogTimer
[Status 06:35:04 INFO] Starting Set [AERI set: name W122, 6 scans, 0 angle, D16300 command]
[Ingest 06:35:04 INFO] Sending XML status message
[Status 06:35:04 INFO] Mirror angle: 0
[Mirror 06:35:04 INFO] rotating to position W
[Status 06:35:04 INFO] .SET file for ACQ96 ready
[Ingest 06:35:05 INFO] Starting acquisition
[Status 06:35:05 INFO] reading housekeeping
[Status 06:35:22 INFO] acquire complete
[Status 06:35:23 INFO] writing housekeeping
[Sequencer 06:35:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:35:23 INFO] incremented W scene to 122 completed views
[Sequencer 06:35:23 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:35:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:35:23 INFO] incremented to [AERI set: name X122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:35:23 INFO] W122.SIG(18)
[sigmove 06:35:23 DEBUG] transformed W122Ma.SPC -> W122MA.SPC
[sigmove 06:35:23 DEBUG] transformed W122Mb.SPC -> W122MB.SPC
[sigmove 06:35:23 DEBUG] transformed W122Mc.SPC -> W122MC.SPC
[sigmove 06:35:23 DEBUG] transformed W122Md.SPC -> W122MD.SPC
[sigmove 06:35:23 DEBUG] transformed W122Me.SPC -> W122ME.SPC
[sigmove 06:35:23 DEBUG] transformed W122Mf.SPC -> W122MF.SPC
[Status 06:35:23 INFO] data for W122 transferred to science data processing
[Tidy 06:35:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:35:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:35:23 INFO] resetting WatchDogTimer
[Status 06:35:23 INFO] Starting Set [AERI set: name X122, 6 scans, 0 angle, D16300 command]
[Ingest 06:35:23 INFO] Sending XML status message
[Status 06:35:23 INFO] Mirror angle: 0
[Mirror 06:35:23 INFO] rotating to position X
[Status 06:35:24 INFO] .SET file for ACQ96 ready
[Ingest 06:35:24 INFO] Starting acquisition
[Status 06:35:24 INFO] reading housekeeping
[Status 06:35:41 INFO] acquire complete
[Status 06:35:42 INFO] writing housekeeping
[Sequencer 06:35:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:35:42 INFO] incremented X scene to 122 completed views
[Sequencer 06:35:42 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:35:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:35:42 INFO] incremented to [AERI set: name Y122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:35:42 INFO] X122.SIG(18)
[sigmove 06:35:42 DEBUG] transformed X122Ma.SPC -> X122MA.SPC
[sigmove 06:35:42 DEBUG] transformed X122Mb.SPC -> X122MB.SPC
[sigmove 06:35:42 DEBUG] transformed X122Mc.SPC -> X122MC.SPC
[sigmove 06:35:42 DEBUG] transformed X122Md.SPC -> X122MD.SPC
[sigmove 06:35:42 DEBUG] transformed X122Me.SPC -> X122ME.SPC
[sigmove 06:35:42 DEBUG] transformed X122Mf.SPC -> X122MF.SPC
[Status 06:35:42 INFO] data for X122 transferred to science data processing
[Tidy 06:35:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:35:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:35:42 INFO] resetting WatchDogTimer
[Status 06:35:42 INFO] Starting Set [AERI set: name Y122, 6 scans, 0 angle, D16300 command]
[Ingest 06:35:42 INFO] Sending XML status message
[Status 06:35:42 INFO] Mirror angle: 0
[Mirror 06:35:42 INFO] rotating to position Y
[Status 06:35:43 INFO] .SET file for ACQ96 ready
[Ingest 06:35:43 INFO] Starting acquisition
[Status 06:35:43 INFO] reading housekeeping
[Status 06:36:00 INFO] acquire complete
[Status 06:36:01 INFO] writing housekeeping
[Sequencer 06:36:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:36:01 INFO] incremented Y scene to 122 completed views
[Sequencer 06:36:01 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:36:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:36:01 INFO] incremented to [AERI set: name Z122, 6 scans, 0 angle, D16300 command] set
[sigmove 06:36:01 INFO] Y122.SIG(18)
[sigmove 06:36:01 DEBUG] transformed Y122Ma.SPC -> Y122MA.SPC
[sigmove 06:36:01 DEBUG] transformed Y122Mb.SPC -> Y122MB.SPC
[sigmove 06:36:01 DEBUG] transformed Y122Mc.SPC -> Y122MC.SPC
[sigmove 06:36:01 DEBUG] transformed Y122Md.SPC -> Y122MD.SPC
[sigmove 06:36:01 DEBUG] transformed Y122Me.SPC -> Y122ME.SPC
[sigmove 06:36:01 DEBUG] transformed Y122Mf.SPC -> Y122MF.SPC
[Status 06:36:01 INFO] data for Y122 transferred to science data processing
[Tidy 06:36:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:36:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:36:01 INFO] resetting WatchDogTimer
[Status 06:36:01 INFO] Starting Set [AERI set: name Z122, 6 scans, 0 angle, D16300 command]
[Ingest 06:36:01 INFO] Sending XML status message
[Status 06:36:01 INFO] Mirror angle: 0
[Mirror 06:36:01 INFO] rotating to position Z
[Status 06:36:02 INFO] .SET file for ACQ96 ready
[Ingest 06:36:02 INFO] Starting acquisition
[Status 06:36:02 INFO] reading housekeeping
[Status 06:36:20 INFO] acquire complete
[Status 06:36:20 INFO] writing housekeeping
[Sequencer 06:36:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:36:20 INFO] incremented Z scene to 122 completed views
[Sequencer 06:36:20 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:36:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:36:20 INFO] incremented to [AERI set: name H123, 6 scans, 60 angle, D22500 command] set
[sigmove 06:36:20 INFO] Z122.SIG(18)
[sigmove 06:36:20 DEBUG] transformed Z122Ma.SPC -> Z122MA.SPC
[sigmove 06:36:20 DEBUG] transformed Z122Mb.SPC -> Z122MB.SPC
[sigmove 06:36:20 DEBUG] transformed Z122Mc.SPC -> Z122MC.SPC
[sigmove 06:36:20 DEBUG] transformed Z122Md.SPC -> Z122MD.SPC
[sigmove 06:36:20 DEBUG] transformed Z122Me.SPC -> Z122ME.SPC
[sigmove 06:36:20 DEBUG] transformed Z122Mf.SPC -> Z122MF.SPC
[Status 06:36:20 INFO] data for Z122 transferred to science data processing
[Tidy 06:36:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:36:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:36:20 INFO] resetting WatchDogTimer
[Status 06:36:20 INFO] Starting Set [AERI set: name H123, 6 scans, 60 angle, D22500 command]
[Ingest 06:36:20 INFO] Sending XML status message
[Status 06:36:20 INFO] Mirror angle: 60
[Mirror 06:36:20 INFO] rotating to position H
[Status 06:36:21 INFO] .SET file for ACQ96 ready
[Ingest 06:36:21 INFO] Starting acquisition
[Status 06:36:22 INFO] reading housekeeping
[Status 06:36:40 INFO] acquire complete
[Status 06:36:40 INFO] writing housekeeping
[Sequencer 06:36:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:36:40 INFO] incremented H scene to 123 completed views
[Sequencer 06:36:40 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:36:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:36:40 INFO] incremented to [AERI set: name A123, 6 scans, 120 angle, D28300 command] set
[sigmove 06:36:40 INFO] H123.SIG(18)
[sigmove 06:36:40 DEBUG] transformed H123Ma.SPC -> H123MA.SPC
[sigmove 06:36:40 DEBUG] transformed H123Mb.SPC -> H123MB.SPC
[sigmove 06:36:40 DEBUG] transformed H123Mc.SPC -> H123MC.SPC
[sigmove 06:36:40 DEBUG] transformed H123Md.SPC -> H123MD.SPC
[sigmove 06:36:40 DEBUG] transformed H123Me.SPC -> H123ME.SPC
[sigmove 06:36:40 DEBUG] transformed H123Mf.SPC -> H123MF.SPC
[Status 06:36:40 INFO] data for H123 transferred to science data processing
[Tidy 06:36:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:36:40 INFO] A121.FIN(19),H121.FIN(19),S121.FIN(19),T121.FIN(19),U121.FIN(19),V121.FIN(19),W121.FIN(19),X121.FIN(19),Y121.FIN(19),Z121.FIN(19),A122.FIN(19),H122.FIN(19),S122.FIN(19),T122.FIN(19),U122.FIN(19),V122.FIN(19),W122.FIN(19),X122.FIN(19),Y122.FIN(19),Z122.FIN(19)
[sigmove 06:36:40 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:36:40 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:36:43 DEBUG] done zipping
[WatchDog 06:36:43 INFO] resetting WatchDogTimer
[Status 06:36:43 INFO] Starting Set [AERI set: name A123, 6 scans, 120 angle, D28300 command]
[Ingest 06:36:43 INFO] Sending XML status message
[Status 06:36:43 INFO] Mirror angle: 120
[Mirror 06:36:43 INFO] rotating to position A
[Status 06:36:44 INFO] .SET file for ACQ96 ready
[Ingest 06:36:44 INFO] Starting acquisition
[Status 06:36:44 INFO] reading housekeeping
[Status 06:37:02 INFO] acquire complete
[Status 06:37:03 INFO] writing housekeeping
[Sequencer 06:37:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:37:03 INFO] incremented A scene to 123 completed views
[Sequencer 06:37:03 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:37:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:37:03 INFO] incremented to [AERI set: name S123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:37:03 INFO] A123.SIG(18)
[sigmove 06:37:03 DEBUG] transformed A123Ma.SPC -> A123MA.SPC
[sigmove 06:37:03 DEBUG] transformed A123Mb.SPC -> A123MB.SPC
[sigmove 06:37:03 DEBUG] transformed A123Mc.SPC -> A123MC.SPC
[sigmove 06:37:03 DEBUG] transformed A123Md.SPC -> A123MD.SPC
[sigmove 06:37:03 DEBUG] transformed A123Me.SPC -> A123ME.SPC
[sigmove 06:37:03 DEBUG] transformed A123Mf.SPC -> A123MF.SPC
[Status 06:37:03 INFO] data for A123 transferred to science data processing
[Tidy 06:37:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:37:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:37:03 INFO] resetting WatchDogTimer
[Status 06:37:03 INFO] Starting Set [AERI set: name S123, 6 scans, 0 angle, D16300 command]
[Ingest 06:37:03 INFO] Sending XML status message
[Status 06:37:03 INFO] Mirror angle: 0
[Mirror 06:37:03 INFO] rotating to position S
[Status 06:37:04 INFO] .SET file for ACQ96 ready
[Ingest 06:37:05 INFO] Starting acquisition
[Status 06:37:05 INFO] reading housekeeping
[Status 06:37:22 INFO] acquire complete
[Status 06:37:23 INFO] writing housekeeping
[Sequencer 06:37:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:37:23 INFO] incremented S scene to 123 completed views
[Sequencer 06:37:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:37:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:37:23 INFO] incremented to [AERI set: name T123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:37:23 INFO] S123.SIG(18)
[sigmove 06:37:23 DEBUG] transformed S123Ma.SPC -> S123MA.SPC
[sigmove 06:37:23 DEBUG] transformed S123Mb.SPC -> S123MB.SPC
[sigmove 06:37:23 DEBUG] transformed S123Mc.SPC -> S123MC.SPC
[sigmove 06:37:23 DEBUG] transformed S123Md.SPC -> S123MD.SPC
[sigmove 06:37:23 DEBUG] transformed S123Me.SPC -> S123ME.SPC
[sigmove 06:37:23 DEBUG] transformed S123Mf.SPC -> S123MF.SPC
[Status 06:37:23 INFO] data for S123 transferred to science data processing
[Tidy 06:37:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:37:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:37:23 INFO] resetting WatchDogTimer
[Status 06:37:23 INFO] Starting Set [AERI set: name T123, 6 scans, 0 angle, D16300 command]
[Ingest 06:37:23 INFO] Sending XML status message
[Status 06:37:23 INFO] Mirror angle: 0
[Mirror 06:37:23 INFO] rotating to position T
[Status 06:37:24 INFO] .SET file for ACQ96 ready
[Ingest 06:37:24 INFO] Starting acquisition
[Status 06:37:24 INFO] reading housekeeping
[Status 06:37:42 INFO] acquire complete
[Status 06:37:42 INFO] writing housekeeping
[Sequencer 06:37:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:37:42 INFO] incremented T scene to 123 completed views
[Sequencer 06:37:42 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:37:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:37:42 INFO] incremented to [AERI set: name U123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:37:42 INFO] T123.SIG(18)
[sigmove 06:37:42 DEBUG] transformed T123Ma.SPC -> T123MA.SPC
[sigmove 06:37:42 DEBUG] transformed T123Mb.SPC -> T123MB.SPC
[sigmove 06:37:42 DEBUG] transformed T123Mc.SPC -> T123MC.SPC
[sigmove 06:37:42 DEBUG] transformed T123Md.SPC -> T123MD.SPC
[sigmove 06:37:42 DEBUG] transformed T123Me.SPC -> T123ME.SPC
[sigmove 06:37:42 DEBUG] transformed T123Mf.SPC -> T123MF.SPC
[Status 06:37:42 INFO] data for T123 transferred to science data processing
[Tidy 06:37:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:37:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:37:42 INFO] resetting WatchDogTimer
[Status 06:37:42 INFO] Starting Set [AERI set: name U123, 6 scans, 0 angle, D16300 command]
[Ingest 06:37:42 INFO] Sending XML status message
[Status 06:37:42 INFO] Mirror angle: 0
[Mirror 06:37:42 INFO] rotating to position U
[Status 06:37:43 INFO] .SET file for ACQ96 ready
[Ingest 06:37:43 INFO] Starting acquisition
[Status 06:37:43 INFO] reading housekeeping
[Status 06:38:01 INFO] acquire complete
[Status 06:38:01 INFO] writing housekeeping
[Sequencer 06:38:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:38:01 INFO] incremented U scene to 123 completed views
[Sequencer 06:38:01 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:38:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:38:01 INFO] incremented to [AERI set: name V123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:38:01 INFO] U123.SIG(18)
[sigmove 06:38:01 DEBUG] transformed U123Ma.SPC -> U123MA.SPC
[sigmove 06:38:01 DEBUG] transformed U123Mb.SPC -> U123MB.SPC
[sigmove 06:38:01 DEBUG] transformed U123Mc.SPC -> U123MC.SPC
[sigmove 06:38:01 DEBUG] transformed U123Md.SPC -> U123MD.SPC
[sigmove 06:38:01 DEBUG] transformed U123Me.SPC -> U123ME.SPC
[sigmove 06:38:01 DEBUG] transformed U123Mf.SPC -> U123MF.SPC
[Status 06:38:01 INFO] data for U123 transferred to science data processing
[Tidy 06:38:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:38:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:38:01 INFO] resetting WatchDogTimer
[Status 06:38:01 INFO] Starting Set [AERI set: name V123, 6 scans, 0 angle, D16300 command]
[Ingest 06:38:01 INFO] Sending XML status message
[Status 06:38:01 INFO] Mirror angle: 0
[Mirror 06:38:02 INFO] rotating to position V
[Status 06:38:02 INFO] .SET file for ACQ96 ready
[Ingest 06:38:02 INFO] Starting acquisition
[Status 06:38:02 INFO] reading housekeeping
[Status 06:38:20 INFO] acquire complete
[Status 06:38:20 INFO] writing housekeeping
[Sequencer 06:38:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:38:20 INFO] incremented V scene to 123 completed views
[Sequencer 06:38:20 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:38:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:38:20 INFO] incremented to [AERI set: name W123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:38:20 INFO] V123.SIG(18)
[sigmove 06:38:20 DEBUG] transformed V123Ma.SPC -> V123MA.SPC
[sigmove 06:38:20 DEBUG] transformed V123Mb.SPC -> V123MB.SPC
[sigmove 06:38:20 DEBUG] transformed V123Mc.SPC -> V123MC.SPC
[sigmove 06:38:20 DEBUG] transformed V123Md.SPC -> V123MD.SPC
[sigmove 06:38:20 DEBUG] transformed V123Me.SPC -> V123ME.SPC
[sigmove 06:38:20 DEBUG] transformed V123Mf.SPC -> V123MF.SPC
[Status 06:38:20 INFO] data for V123 transferred to science data processing
[Tidy 06:38:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:38:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:38:20 INFO] resetting WatchDogTimer
[Status 06:38:20 INFO] Starting Set [AERI set: name W123, 6 scans, 0 angle, D16300 command]
[Ingest 06:38:20 INFO] Sending XML status message
[Status 06:38:20 INFO] Mirror angle: 0
[Mirror 06:38:21 INFO] rotating to position W
[Status 06:38:21 INFO] .SET file for ACQ96 ready
[Ingest 06:38:21 INFO] Starting acquisition
[Status 06:38:21 INFO] reading housekeeping
[Status 06:38:39 INFO] acquire complete
[Status 06:38:39 INFO] writing housekeeping
[Sequencer 06:38:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:38:39 INFO] incremented W scene to 123 completed views
[Sequencer 06:38:39 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:38:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:38:39 INFO] incremented to [AERI set: name X123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:38:39 INFO] W123.SIG(18)
[sigmove 06:38:39 DEBUG] transformed W123Ma.SPC -> W123MA.SPC
[sigmove 06:38:39 DEBUG] transformed W123Mb.SPC -> W123MB.SPC
[sigmove 06:38:39 DEBUG] transformed W123Mc.SPC -> W123MC.SPC
[sigmove 06:38:39 DEBUG] transformed W123Md.SPC -> W123MD.SPC
[sigmove 06:38:39 DEBUG] transformed W123Me.SPC -> W123ME.SPC
[sigmove 06:38:39 DEBUG] transformed W123Mf.SPC -> W123MF.SPC
[Status 06:38:39 INFO] data for W123 transferred to science data processing
[Tidy 06:38:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:38:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:38:39 INFO] resetting WatchDogTimer
[Status 06:38:39 INFO] Starting Set [AERI set: name X123, 6 scans, 0 angle, D16300 command]
[Ingest 06:38:40 INFO] Sending XML status message
[Status 06:38:40 INFO] Mirror angle: 0
[Mirror 06:38:40 INFO] rotating to position X
[Status 06:38:40 INFO] .SET file for ACQ96 ready
[Ingest 06:38:40 INFO] Starting acquisition
[Status 06:38:40 INFO] reading housekeeping
[Status 06:38:58 INFO] acquire complete
[Status 06:38:58 INFO] writing housekeeping
[Sequencer 06:38:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:38:58 INFO] incremented X scene to 123 completed views
[Sequencer 06:38:58 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:38:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:38:58 INFO] incremented to [AERI set: name Y123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:38:58 INFO] X123.SIG(18)
[sigmove 06:38:58 DEBUG] transformed X123Ma.SPC -> X123MA.SPC
[sigmove 06:38:58 DEBUG] transformed X123Mb.SPC -> X123MB.SPC
[sigmove 06:38:58 DEBUG] transformed X123Mc.SPC -> X123MC.SPC
[sigmove 06:38:58 DEBUG] transformed X123Md.SPC -> X123MD.SPC
[sigmove 06:38:58 DEBUG] transformed X123Me.SPC -> X123ME.SPC
[sigmove 06:38:58 DEBUG] transformed X123Mf.SPC -> X123MF.SPC
[Status 06:38:58 INFO] data for X123 transferred to science data processing
[Tidy 06:38:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:38:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:38:58 INFO] resetting WatchDogTimer
[Status 06:38:59 INFO] Starting Set [AERI set: name Y123, 6 scans, 0 angle, D16300 command]
[Ingest 06:38:59 INFO] Sending XML status message
[Status 06:38:59 INFO] Mirror angle: 0
[Mirror 06:38:59 INFO] rotating to position Y
[Status 06:38:59 INFO] .SET file for ACQ96 ready
[Ingest 06:38:59 INFO] Starting acquisition
[Status 06:38:59 INFO] reading housekeeping
[Status 06:39:17 INFO] acquire complete
[Status 06:39:17 INFO] writing housekeeping
[Sequencer 06:39:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:39:17 INFO] incremented Y scene to 123 completed views
[Sequencer 06:39:17 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:39:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:39:17 INFO] incremented to [AERI set: name Z123, 6 scans, 0 angle, D16300 command] set
[sigmove 06:39:17 INFO] Y123.SIG(18)
[sigmove 06:39:17 DEBUG] transformed Y123Ma.SPC -> Y123MA.SPC
[sigmove 06:39:17 DEBUG] transformed Y123Mb.SPC -> Y123MB.SPC
[sigmove 06:39:18 DEBUG] transformed Y123Mc.SPC -> Y123MC.SPC
[sigmove 06:39:18 DEBUG] transformed Y123Md.SPC -> Y123MD.SPC
[sigmove 06:39:18 DEBUG] transformed Y123Me.SPC -> Y123ME.SPC
[sigmove 06:39:18 DEBUG] transformed Y123Mf.SPC -> Y123MF.SPC
[Status 06:39:18 INFO] data for Y123 transferred to science data processing
[Tidy 06:39:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:39:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:39:18 INFO] resetting WatchDogTimer
[Status 06:39:18 INFO] Starting Set [AERI set: name Z123, 6 scans, 0 angle, D16300 command]
[Ingest 06:39:18 INFO] Sending XML status message
[Status 06:39:18 INFO] Mirror angle: 0
[Mirror 06:39:18 INFO] rotating to position Z
[Status 06:39:18 INFO] .SET file for ACQ96 ready
[Ingest 06:39:18 INFO] Starting acquisition
[Status 06:39:18 INFO] reading housekeeping
[Status 06:39:36 INFO] acquire complete
[Status 06:39:37 INFO] writing housekeeping
[Sequencer 06:39:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:39:37 INFO] incremented Z scene to 123 completed views
[Sequencer 06:39:37 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:39:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:39:37 INFO] incremented to [AERI set: name A124, 6 scans, 120 angle, D28300 command] set
[sigmove 06:39:37 INFO] Z123.SIG(18)
[sigmove 06:39:37 DEBUG] transformed Z123Ma.SPC -> Z123MA.SPC
[sigmove 06:39:37 DEBUG] transformed Z123Mb.SPC -> Z123MB.SPC
[sigmove 06:39:37 DEBUG] transformed Z123Mc.SPC -> Z123MC.SPC
[sigmove 06:39:37 DEBUG] transformed Z123Md.SPC -> Z123MD.SPC
[sigmove 06:39:37 DEBUG] transformed Z123Me.SPC -> Z123ME.SPC
[sigmove 06:39:37 DEBUG] transformed Z123Mf.SPC -> Z123MF.SPC
[Status 06:39:37 INFO] data for Z123 transferred to science data processing
[Tidy 06:39:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:39:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:39:37 INFO] resetting WatchDogTimer
[Status 06:39:37 INFO] Starting Set [AERI set: name A124, 6 scans, 120 angle, D28300 command]
[Ingest 06:39:37 INFO] Sending XML status message
[Status 06:39:37 INFO] Mirror angle: 120
[Mirror 06:39:37 INFO] rotating to position A
[Status 06:39:38 INFO] .SET file for ACQ96 ready
[Ingest 06:39:38 INFO] Starting acquisition
[Status 06:39:39 INFO] reading housekeeping
[Status 06:39:56 INFO] acquire complete
[Status 06:39:57 INFO] writing housekeeping
[Sequencer 06:39:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:39:57 INFO] incremented A scene to 124 completed views
[Sequencer 06:39:57 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:39:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:39:57 INFO] incremented to [AERI set: name H124, 6 scans, 60 angle, D22500 command] set
[sigmove 06:39:57 INFO] A124.SIG(18)
[sigmove 06:39:57 DEBUG] transformed A124Ma.SPC -> A124MA.SPC
[sigmove 06:39:57 DEBUG] transformed A124Mb.SPC -> A124MB.SPC
[sigmove 06:39:57 DEBUG] transformed A124Mc.SPC -> A124MC.SPC
[sigmove 06:39:57 DEBUG] transformed A124Md.SPC -> A124MD.SPC
[sigmove 06:39:57 DEBUG] transformed A124Me.SPC -> A124ME.SPC
[sigmove 06:39:57 DEBUG] transformed A124Mf.SPC -> A124MF.SPC
[Status 06:39:57 INFO] data for A124 transferred to science data processing
[Tidy 06:39:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:39:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:39:57 INFO] resetting WatchDogTimer
[Status 06:39:57 INFO] Starting Set [AERI set: name H124, 6 scans, 60 angle, D22500 command]
[Ingest 06:39:57 INFO] Sending XML status message
[Status 06:39:57 INFO] Mirror angle: 60
[Mirror 06:39:57 INFO] rotating to position H
[Status 06:39:58 INFO] .SET file for ACQ96 ready
[Ingest 06:39:58 INFO] Starting acquisition
[Status 06:39:58 INFO] reading housekeeping
[Status 06:40:16 INFO] acquire complete
[Status 06:40:17 INFO] writing housekeeping
[Sequencer 06:40:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:40:17 INFO] incremented H scene to 124 completed views
[Sequencer 06:40:17 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:40:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:40:17 INFO] incremented to [AERI set: name S124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:40:17 INFO] H124.SIG(18)
[sigmove 06:40:17 DEBUG] transformed H124Ma.SPC -> H124MA.SPC
[sigmove 06:40:17 DEBUG] transformed H124Mb.SPC -> H124MB.SPC
[sigmove 06:40:17 DEBUG] transformed H124Mc.SPC -> H124MC.SPC
[sigmove 06:40:17 DEBUG] transformed H124Md.SPC -> H124MD.SPC
[sigmove 06:40:17 DEBUG] transformed H124Me.SPC -> H124ME.SPC
[sigmove 06:40:17 DEBUG] transformed H124Mf.SPC -> H124MF.SPC
[Status 06:40:17 INFO] data for H124 transferred to science data processing
[Tidy 06:40:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:40:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:40:17 INFO] resetting WatchDogTimer
[Status 06:40:17 INFO] Starting Set [AERI set: name S124, 6 scans, 0 angle, D16300 command]
[Ingest 06:40:17 INFO] Sending XML status message
[Status 06:40:17 INFO] Mirror angle: 0
[Mirror 06:40:17 INFO] rotating to position S
[Status 06:40:18 INFO] .SET file for ACQ96 ready
[Ingest 06:40:18 INFO] Starting acquisition
[Status 06:40:18 INFO] reading housekeeping
[Status 06:40:37 INFO] acquire complete
[Status 06:40:37 INFO] writing housekeeping
[Sequencer 06:40:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:40:37 INFO] incremented S scene to 124 completed views
[Sequencer 06:40:37 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:40:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:40:37 INFO] incremented to [AERI set: name T124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:40:37 INFO] S124.SIG(18)
[sigmove 06:40:37 DEBUG] transformed S124Ma.SPC -> S124MA.SPC
[sigmove 06:40:37 DEBUG] transformed S124Mb.SPC -> S124MB.SPC
[sigmove 06:40:37 DEBUG] transformed S124Mc.SPC -> S124MC.SPC
[sigmove 06:40:37 DEBUG] transformed S124Md.SPC -> S124MD.SPC
[sigmove 06:40:37 DEBUG] transformed S124Me.SPC -> S124ME.SPC
[sigmove 06:40:37 DEBUG] transformed S124Mf.SPC -> S124MF.SPC
[Status 06:40:37 INFO] data for S124 transferred to science data processing
[Tidy 06:40:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:40:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:40:37 INFO] resetting WatchDogTimer
[Status 06:40:37 INFO] Starting Set [AERI set: name T124, 6 scans, 0 angle, D16300 command]
[Ingest 06:40:37 INFO] Sending XML status message
[Status 06:40:37 INFO] Mirror angle: 0
[Mirror 06:40:38 INFO] rotating to position T
[Status 06:40:38 INFO] .SET file for ACQ96 ready
[Ingest 06:40:38 INFO] Starting acquisition
[Status 06:40:38 INFO] reading housekeeping
[Status 06:40:56 INFO] acquire complete
[Status 06:40:56 INFO] writing housekeeping
[Sequencer 06:40:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:40:56 INFO] incremented T scene to 124 completed views
[Sequencer 06:40:56 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:40:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:40:56 INFO] incremented to [AERI set: name U124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:40:56 INFO] T124.SIG(18)
[sigmove 06:40:56 DEBUG] transformed T124Ma.SPC -> T124MA.SPC
[sigmove 06:40:56 DEBUG] transformed T124Mb.SPC -> T124MB.SPC
[sigmove 06:40:56 DEBUG] transformed T124Mc.SPC -> T124MC.SPC
[sigmove 06:40:56 DEBUG] transformed T124Md.SPC -> T124MD.SPC
[sigmove 06:40:56 DEBUG] transformed T124Me.SPC -> T124ME.SPC
[sigmove 06:40:56 DEBUG] transformed T124Mf.SPC -> T124MF.SPC
[Status 06:40:56 INFO] data for T124 transferred to science data processing
[Tidy 06:40:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:40:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:40:56 INFO] resetting WatchDogTimer
[Status 06:40:56 INFO] Starting Set [AERI set: name U124, 6 scans, 0 angle, D16300 command]
[Ingest 06:40:56 INFO] Sending XML status message
[Status 06:40:56 INFO] Mirror angle: 0
[Mirror 06:40:57 INFO] rotating to position U
[Status 06:40:57 INFO] .SET file for ACQ96 ready
[Ingest 06:40:57 INFO] Starting acquisition
[Status 06:40:57 INFO] reading housekeeping
[Status 06:41:15 INFO] acquire complete
[Status 06:41:15 INFO] writing housekeeping
[Sequencer 06:41:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:41:15 INFO] incremented U scene to 124 completed views
[Sequencer 06:41:15 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:41:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:41:15 INFO] incremented to [AERI set: name V124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:41:15 INFO] U124.SIG(18)
[sigmove 06:41:15 DEBUG] transformed U124Ma.SPC -> U124MA.SPC
[sigmove 06:41:15 DEBUG] transformed U124Mb.SPC -> U124MB.SPC
[sigmove 06:41:15 DEBUG] transformed U124Mc.SPC -> U124MC.SPC
[sigmove 06:41:15 DEBUG] transformed U124Md.SPC -> U124MD.SPC
[sigmove 06:41:15 DEBUG] transformed U124Me.SPC -> U124ME.SPC
[sigmove 06:41:15 DEBUG] transformed U124Mf.SPC -> U124MF.SPC
[Status 06:41:15 INFO] data for U124 transferred to science data processing
[Tidy 06:41:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:41:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:41:15 INFO] resetting WatchDogTimer
[Status 06:41:16 INFO] Starting Set [AERI set: name V124, 6 scans, 0 angle, D16300 command]
[Ingest 06:41:16 INFO] Sending XML status message
[Status 06:41:16 INFO] Mirror angle: 0
[Mirror 06:41:16 INFO] rotating to position V
[Status 06:41:16 INFO] .SET file for ACQ96 ready
[Ingest 06:41:16 INFO] Starting acquisition
[Status 06:41:16 INFO] reading housekeeping
[Status 06:41:34 INFO] acquire complete
[Status 06:41:34 INFO] writing housekeeping
[Sequencer 06:41:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:41:34 INFO] incremented V scene to 124 completed views
[Sequencer 06:41:34 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:41:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:41:34 INFO] incremented to [AERI set: name W124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:41:34 INFO] V124.SIG(18)
[sigmove 06:41:34 DEBUG] transformed V124Ma.SPC -> V124MA.SPC
[sigmove 06:41:34 DEBUG] transformed V124Mb.SPC -> V124MB.SPC
[sigmove 06:41:34 DEBUG] transformed V124Mc.SPC -> V124MC.SPC
[sigmove 06:41:34 DEBUG] transformed V124Md.SPC -> V124MD.SPC
[sigmove 06:41:34 DEBUG] transformed V124Me.SPC -> V124ME.SPC
[sigmove 06:41:34 DEBUG] transformed V124Mf.SPC -> V124MF.SPC
[Status 06:41:34 INFO] data for V124 transferred to science data processing
[Tidy 06:41:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:41:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:41:34 INFO] resetting WatchDogTimer
[Status 06:41:35 INFO] Starting Set [AERI set: name W124, 6 scans, 0 angle, D16300 command]
[Ingest 06:41:35 INFO] Sending XML status message
[Status 06:41:35 INFO] Mirror angle: 0
[Mirror 06:41:35 INFO] rotating to position W
[Status 06:41:35 INFO] .SET file for ACQ96 ready
[Ingest 06:41:35 INFO] Starting acquisition
[Status 06:41:35 INFO] reading housekeeping
[Status 06:41:53 INFO] acquire complete
[Status 06:41:54 INFO] writing housekeeping
[Sequencer 06:41:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:41:54 INFO] incremented W scene to 124 completed views
[Sequencer 06:41:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:41:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:41:54 INFO] incremented to [AERI set: name X124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:41:54 INFO] W124.SIG(18)
[sigmove 06:41:54 DEBUG] transformed W124Ma.SPC -> W124MA.SPC
[sigmove 06:41:54 DEBUG] transformed W124Mb.SPC -> W124MB.SPC
[sigmove 06:41:54 DEBUG] transformed W124Mc.SPC -> W124MC.SPC
[sigmove 06:41:54 DEBUG] transformed W124Md.SPC -> W124MD.SPC
[sigmove 06:41:54 DEBUG] transformed W124Me.SPC -> W124ME.SPC
[sigmove 06:41:54 DEBUG] transformed W124Mf.SPC -> W124MF.SPC
[Status 06:41:54 INFO] data for W124 transferred to science data processing
[Tidy 06:41:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:41:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:41:54 INFO] resetting WatchDogTimer
[Status 06:41:54 INFO] Starting Set [AERI set: name X124, 6 scans, 0 angle, D16300 command]
[Ingest 06:41:54 INFO] Sending XML status message
[Status 06:41:54 INFO] Mirror angle: 0
[Mirror 06:41:54 INFO] rotating to position X
[Status 06:41:54 INFO] .SET file for ACQ96 ready
[Ingest 06:41:54 INFO] Starting acquisition
[Status 06:41:55 INFO] reading housekeeping
[Status 06:42:12 INFO] acquire complete
[Status 06:42:13 INFO] writing housekeeping
[Sequencer 06:42:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:42:13 INFO] incremented X scene to 124 completed views
[Sequencer 06:42:13 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:42:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:42:13 INFO] incremented to [AERI set: name Y124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:42:13 INFO] X124.SIG(18)
[sigmove 06:42:13 DEBUG] transformed X124Ma.SPC -> X124MA.SPC
[sigmove 06:42:13 DEBUG] transformed X124Mb.SPC -> X124MB.SPC
[sigmove 06:42:13 DEBUG] transformed X124Mc.SPC -> X124MC.SPC
[sigmove 06:42:13 DEBUG] transformed X124Md.SPC -> X124MD.SPC
[sigmove 06:42:13 DEBUG] transformed X124Me.SPC -> X124ME.SPC
[sigmove 06:42:13 DEBUG] transformed X124Mf.SPC -> X124MF.SPC
[Status 06:42:13 INFO] data for X124 transferred to science data processing
[Tidy 06:42:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:42:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:42:13 INFO] resetting WatchDogTimer
[Status 06:42:13 INFO] Starting Set [AERI set: name Y124, 6 scans, 0 angle, D16300 command]
[Ingest 06:42:13 INFO] Sending XML status message
[Status 06:42:13 INFO] Mirror angle: 0
[Mirror 06:42:13 INFO] rotating to position Y
[Status 06:42:13 INFO] .SET file for ACQ96 ready
[Ingest 06:42:13 INFO] Starting acquisition
[Status 06:42:14 INFO] reading housekeeping
[Status 06:42:31 INFO] acquire complete
[Status 06:42:32 INFO] writing housekeeping
[Sequencer 06:42:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:42:32 INFO] incremented Y scene to 124 completed views
[Sequencer 06:42:32 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:42:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:42:32 INFO] incremented to [AERI set: name Z124, 6 scans, 0 angle, D16300 command] set
[sigmove 06:42:32 INFO] Y124.SIG(18)
[sigmove 06:42:32 DEBUG] transformed Y124Ma.SPC -> Y124MA.SPC
[sigmove 06:42:32 DEBUG] transformed Y124Mb.SPC -> Y124MB.SPC
[sigmove 06:42:32 DEBUG] transformed Y124Mc.SPC -> Y124MC.SPC
[sigmove 06:42:32 DEBUG] transformed Y124Md.SPC -> Y124MD.SPC
[sigmove 06:42:32 DEBUG] transformed Y124Me.SPC -> Y124ME.SPC
[sigmove 06:42:32 DEBUG] transformed Y124Mf.SPC -> Y124MF.SPC
[Status 06:42:32 INFO] data for Y124 transferred to science data processing
[Tidy 06:42:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:42:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:42:32 INFO] resetting WatchDogTimer
[Status 06:42:32 INFO] Starting Set [AERI set: name Z124, 6 scans, 0 angle, D16300 command]
[Ingest 06:42:32 INFO] Sending XML status message
[Status 06:42:32 INFO] Mirror angle: 0
[Mirror 06:42:32 INFO] rotating to position Z
[Status 06:42:32 INFO] .SET file for ACQ96 ready
[Ingest 06:42:32 INFO] Starting acquisition
[Status 06:42:33 INFO] reading housekeeping
[Status 06:42:50 INFO] acquire complete
[Status 06:42:51 INFO] writing housekeeping
[Sequencer 06:42:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:42:51 INFO] incremented Z scene to 124 completed views
[Sequencer 06:42:51 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:42:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:42:51 INFO] incremented to [AERI set: name H125, 6 scans, 60 angle, D22500 command] set
[sigmove 06:42:51 INFO] Z124.SIG(18)
[sigmove 06:42:51 DEBUG] transformed Z124Ma.SPC -> Z124MA.SPC
[sigmove 06:42:51 DEBUG] transformed Z124Mb.SPC -> Z124MB.SPC
[sigmove 06:42:51 DEBUG] transformed Z124Mc.SPC -> Z124MC.SPC
[sigmove 06:42:51 DEBUG] transformed Z124Md.SPC -> Z124MD.SPC
[sigmove 06:42:51 DEBUG] transformed Z124Me.SPC -> Z124ME.SPC
[sigmove 06:42:51 DEBUG] transformed Z124Mf.SPC -> Z124MF.SPC
[Status 06:42:51 INFO] data for Z124 transferred to science data processing
[Tidy 06:42:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:42:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:42:51 INFO] resetting WatchDogTimer
[Status 06:42:51 INFO] Starting Set [AERI set: name H125, 6 scans, 60 angle, D22500 command]
[Ingest 06:42:51 INFO] Sending XML status message
[Status 06:42:51 INFO] Mirror angle: 60
[Mirror 06:42:51 INFO] rotating to position H
[Status 06:42:52 INFO] .SET file for ACQ96 ready
[Ingest 06:42:52 INFO] Starting acquisition
[Status 06:42:52 INFO] reading housekeeping
[Status 06:43:10 INFO] acquire complete
[Status 06:43:11 INFO] writing housekeeping
[Sequencer 06:43:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:43:11 INFO] incremented H scene to 125 completed views
[Sequencer 06:43:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:43:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:43:11 INFO] incremented to [AERI set: name A125, 6 scans, 120 angle, D28300 command] set
[sigmove 06:43:11 INFO] H125.SIG(18)
[sigmove 06:43:11 DEBUG] transformed H125Ma.SPC -> H125MA.SPC
[sigmove 06:43:11 DEBUG] transformed H125Mb.SPC -> H125MB.SPC
[sigmove 06:43:11 DEBUG] transformed H125Mc.SPC -> H125MC.SPC
[sigmove 06:43:11 DEBUG] transformed H125Md.SPC -> H125MD.SPC
[sigmove 06:43:11 DEBUG] transformed H125Me.SPC -> H125ME.SPC
[sigmove 06:43:11 DEBUG] transformed H125Mf.SPC -> H125MF.SPC
[Status 06:43:11 INFO] data for H125 transferred to science data processing
[Tidy 06:43:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:43:11 INFO] A123.FIN(19),H123.FIN(19),S123.FIN(19),T123.FIN(19),U123.FIN(19),V123.FIN(19),W123.FIN(19),X123.FIN(19),Y123.FIN(19),Z123.FIN(19),A124.FIN(19),H124.FIN(19),S124.FIN(19),T124.FIN(19),U124.FIN(19),V124.FIN(19),W124.FIN(19),X124.FIN(19),Y124.FIN(19),Z124.FIN(19)
[sigmove 06:43:11 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:43:11 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:43:13 DEBUG] done zipping
[WatchDog 06:43:13 INFO] resetting WatchDogTimer
[Status 06:43:14 INFO] Starting Set [AERI set: name A125, 6 scans, 120 angle, D28300 command]
[Ingest 06:43:14 INFO] Sending XML status message
[Status 06:43:14 INFO] Mirror angle: 120
[Mirror 06:43:14 INFO] rotating to position A
[Status 06:43:15 INFO] .SET file for ACQ96 ready
[Ingest 06:43:15 INFO] Starting acquisition
[Status 06:43:15 INFO] reading housekeeping
[Status 06:43:33 INFO] acquire complete
[Status 06:43:33 INFO] writing housekeeping
[Sequencer 06:43:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:43:33 INFO] incremented A scene to 125 completed views
[Sequencer 06:43:33 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:43:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:43:33 INFO] incremented to [AERI set: name S125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:43:33 INFO] A125.SIG(18)
[sigmove 06:43:33 DEBUG] transformed A125Ma.SPC -> A125MA.SPC
[sigmove 06:43:33 DEBUG] transformed A125Mb.SPC -> A125MB.SPC
[sigmove 06:43:33 DEBUG] transformed A125Mc.SPC -> A125MC.SPC
[sigmove 06:43:33 DEBUG] transformed A125Md.SPC -> A125MD.SPC
[sigmove 06:43:33 DEBUG] transformed A125Me.SPC -> A125ME.SPC
[sigmove 06:43:33 DEBUG] transformed A125Mf.SPC -> A125MF.SPC
[Status 06:43:33 INFO] data for A125 transferred to science data processing
[Tidy 06:43:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:43:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:43:33 INFO] resetting WatchDogTimer
[Status 06:43:34 INFO] Starting Set [AERI set: name S125, 6 scans, 0 angle, D16300 command]
[Ingest 06:43:34 INFO] Sending XML status message
[Status 06:43:34 INFO] Mirror angle: 0
[Mirror 06:43:34 INFO] rotating to position S
[Status 06:43:35 INFO] .SET file for ACQ96 ready
[Ingest 06:43:35 INFO] Starting acquisition
[Status 06:43:35 INFO] reading housekeeping
[Status 06:43:53 INFO] acquire complete
[Status 06:43:54 INFO] writing housekeeping
[Sequencer 06:43:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:43:54 INFO] incremented S scene to 125 completed views
[Sequencer 06:43:54 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:43:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:43:54 INFO] incremented to [AERI set: name T125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:43:54 INFO] S125.SIG(18)
[sigmove 06:43:54 DEBUG] transformed S125Ma.SPC -> S125MA.SPC
[sigmove 06:43:54 DEBUG] transformed S125Mb.SPC -> S125MB.SPC
[sigmove 06:43:54 DEBUG] transformed S125Mc.SPC -> S125MC.SPC
[sigmove 06:43:54 DEBUG] transformed S125Md.SPC -> S125MD.SPC
[sigmove 06:43:54 DEBUG] transformed S125Me.SPC -> S125ME.SPC
[sigmove 06:43:54 DEBUG] transformed S125Mf.SPC -> S125MF.SPC
[Status 06:43:54 INFO] data for S125 transferred to science data processing
[Tidy 06:43:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:43:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:43:54 INFO] resetting WatchDogTimer
[Status 06:43:54 INFO] Starting Set [AERI set: name T125, 6 scans, 0 angle, D16300 command]
[Ingest 06:43:54 INFO] Sending XML status message
[Status 06:43:54 INFO] Mirror angle: 0
[Mirror 06:43:54 INFO] rotating to position T
[Status 06:43:54 INFO] .SET file for ACQ96 ready
[Ingest 06:43:54 INFO] Starting acquisition
[Status 06:43:55 INFO] reading housekeeping
[Status 06:44:12 INFO] acquire complete
[Status 06:44:13 INFO] writing housekeeping
[Sequencer 06:44:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:44:13 INFO] incremented T scene to 125 completed views
[Sequencer 06:44:13 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:44:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:44:13 INFO] incremented to [AERI set: name U125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:44:13 INFO] T125.SIG(18)
[sigmove 06:44:13 DEBUG] transformed T125Ma.SPC -> T125MA.SPC
[sigmove 06:44:13 DEBUG] transformed T125Mb.SPC -> T125MB.SPC
[sigmove 06:44:13 DEBUG] transformed T125Mc.SPC -> T125MC.SPC
[sigmove 06:44:13 DEBUG] transformed T125Md.SPC -> T125MD.SPC
[sigmove 06:44:13 DEBUG] transformed T125Me.SPC -> T125ME.SPC
[sigmove 06:44:13 DEBUG] transformed T125Mf.SPC -> T125MF.SPC
[Status 06:44:13 INFO] data for T125 transferred to science data processing
[Tidy 06:44:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:44:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:44:13 INFO] resetting WatchDogTimer
[Status 06:44:13 INFO] Starting Set [AERI set: name U125, 6 scans, 0 angle, D16300 command]
[Ingest 06:44:13 INFO] Sending XML status message
[Status 06:44:13 INFO] Mirror angle: 0
[Mirror 06:44:13 INFO] rotating to position U
[Status 06:44:13 INFO] .SET file for ACQ96 ready
[Ingest 06:44:13 INFO] Starting acquisition
[Status 06:44:14 INFO] reading housekeeping
[Status 06:44:31 INFO] acquire complete
[Status 06:44:32 INFO] writing housekeeping
[Sequencer 06:44:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:44:32 INFO] incremented U scene to 125 completed views
[Sequencer 06:44:32 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:44:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:44:32 INFO] incremented to [AERI set: name V125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:44:32 INFO] U125.SIG(18)
[sigmove 06:44:32 DEBUG] transformed U125Ma.SPC -> U125MA.SPC
[sigmove 06:44:32 DEBUG] transformed U125Mb.SPC -> U125MB.SPC
[sigmove 06:44:32 DEBUG] transformed U125Mc.SPC -> U125MC.SPC
[sigmove 06:44:32 DEBUG] transformed U125Md.SPC -> U125MD.SPC
[sigmove 06:44:32 DEBUG] transformed U125Me.SPC -> U125ME.SPC
[sigmove 06:44:32 DEBUG] transformed U125Mf.SPC -> U125MF.SPC
[Status 06:44:32 INFO] data for U125 transferred to science data processing
[Tidy 06:44:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:44:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:44:32 INFO] resetting WatchDogTimer
[Status 06:44:32 INFO] Starting Set [AERI set: name V125, 6 scans, 0 angle, D16300 command]
[Ingest 06:44:32 INFO] Sending XML status message
[Status 06:44:32 INFO] Mirror angle: 0
[Mirror 06:44:32 INFO] rotating to position V
[Status 06:44:32 INFO] .SET file for ACQ96 ready
[Ingest 06:44:33 INFO] Starting acquisition
[Status 06:44:33 INFO] reading housekeeping
[Status 06:44:50 INFO] acquire complete
[Status 06:44:51 INFO] writing housekeeping
[Sequencer 06:44:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:44:51 INFO] incremented V scene to 125 completed views
[Sequencer 06:44:51 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:44:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:44:51 INFO] incremented to [AERI set: name W125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:44:51 INFO] V125.SIG(18)
[sigmove 06:44:51 DEBUG] transformed V125Ma.SPC -> V125MA.SPC
[sigmove 06:44:51 DEBUG] transformed V125Mb.SPC -> V125MB.SPC
[sigmove 06:44:51 DEBUG] transformed V125Mc.SPC -> V125MC.SPC
[sigmove 06:44:51 DEBUG] transformed V125Md.SPC -> V125MD.SPC
[sigmove 06:44:51 DEBUG] transformed V125Me.SPC -> V125ME.SPC
[sigmove 06:44:51 DEBUG] transformed V125Mf.SPC -> V125MF.SPC
[Status 06:44:51 INFO] data for V125 transferred to science data processing
[Tidy 06:44:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:44:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:44:51 INFO] resetting WatchDogTimer
[Status 06:44:51 INFO] Starting Set [AERI set: name W125, 6 scans, 0 angle, D16300 command]
[Ingest 06:44:51 INFO] Sending XML status message
[Status 06:44:51 INFO] Mirror angle: 0
[Mirror 06:44:51 INFO] rotating to position W
[Status 06:44:51 INFO] .SET file for ACQ96 ready
[Ingest 06:44:52 INFO] Starting acquisition
[Status 06:44:52 INFO] reading housekeeping
[Status 06:45:09 INFO] acquire complete
[Status 06:45:10 INFO] writing housekeeping
[Sequencer 06:45:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:45:10 INFO] incremented W scene to 125 completed views
[Sequencer 06:45:10 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:45:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:45:10 INFO] incremented to [AERI set: name X125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:45:10 INFO] W125.SIG(18)
[sigmove 06:45:10 DEBUG] transformed W125Ma.SPC -> W125MA.SPC
[sigmove 06:45:10 DEBUG] transformed W125Mb.SPC -> W125MB.SPC
[sigmove 06:45:10 DEBUG] transformed W125Mc.SPC -> W125MC.SPC
[sigmove 06:45:10 DEBUG] transformed W125Md.SPC -> W125MD.SPC
[sigmove 06:45:10 DEBUG] transformed W125Me.SPC -> W125ME.SPC
[sigmove 06:45:10 DEBUG] transformed W125Mf.SPC -> W125MF.SPC
[Status 06:45:10 INFO] data for W125 transferred to science data processing
[Tidy 06:45:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:45:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:45:10 INFO] resetting WatchDogTimer
[Status 06:45:10 INFO] Starting Set [AERI set: name X125, 6 scans, 0 angle, D16300 command]
[Ingest 06:45:10 INFO] Sending XML status message
[Status 06:45:10 INFO] Mirror angle: 0
[Mirror 06:45:10 INFO] rotating to position X
[Status 06:45:11 INFO] .SET file for ACQ96 ready
[Ingest 06:45:11 INFO] Starting acquisition
[Status 06:45:11 INFO] reading housekeeping
[Status 06:45:28 INFO] acquire complete
[Status 06:45:29 INFO] writing housekeeping
[Sequencer 06:45:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:45:29 INFO] incremented X scene to 125 completed views
[Sequencer 06:45:29 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:45:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:45:29 INFO] incremented to [AERI set: name Y125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:45:29 INFO] X125.SIG(18)
[sigmove 06:45:29 DEBUG] transformed X125Ma.SPC -> X125MA.SPC
[sigmove 06:45:29 DEBUG] transformed X125Mb.SPC -> X125MB.SPC
[sigmove 06:45:29 DEBUG] transformed X125Mc.SPC -> X125MC.SPC
[sigmove 06:45:29 DEBUG] transformed X125Md.SPC -> X125MD.SPC
[sigmove 06:45:29 DEBUG] transformed X125Me.SPC -> X125ME.SPC
[sigmove 06:45:29 DEBUG] transformed X125Mf.SPC -> X125MF.SPC
[Status 06:45:29 INFO] data for X125 transferred to science data processing
[Tidy 06:45:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:45:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:45:29 INFO] resetting WatchDogTimer
[Status 06:45:29 INFO] Starting Set [AERI set: name Y125, 6 scans, 0 angle, D16300 command]
[Ingest 06:45:29 INFO] Sending XML status message
[Status 06:45:29 INFO] Mirror angle: 0
[Mirror 06:45:29 INFO] rotating to position Y
[Status 06:45:30 INFO] .SET file for ACQ96 ready
[Ingest 06:45:30 INFO] Starting acquisition
[Status 06:45:30 INFO] reading housekeeping
[Status 06:45:48 INFO] acquire complete
[Status 06:45:48 INFO] writing housekeeping
[Sequencer 06:45:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:45:48 INFO] incremented Y scene to 125 completed views
[Sequencer 06:45:48 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:45:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:45:48 INFO] incremented to [AERI set: name Z125, 6 scans, 0 angle, D16300 command] set
[sigmove 06:45:48 INFO] Y125.SIG(18)
[sigmove 06:45:48 DEBUG] transformed Y125Ma.SPC -> Y125MA.SPC
[sigmove 06:45:48 DEBUG] transformed Y125Mb.SPC -> Y125MB.SPC
[sigmove 06:45:48 DEBUG] transformed Y125Mc.SPC -> Y125MC.SPC
[sigmove 06:45:48 DEBUG] transformed Y125Md.SPC -> Y125MD.SPC
[sigmove 06:45:48 DEBUG] transformed Y125Me.SPC -> Y125ME.SPC
[sigmove 06:45:48 DEBUG] transformed Y125Mf.SPC -> Y125MF.SPC
[Status 06:45:48 INFO] data for Y125 transferred to science data processing
[Tidy 06:45:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:45:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:45:48 INFO] resetting WatchDogTimer
[Status 06:45:48 INFO] Starting Set [AERI set: name Z125, 6 scans, 0 angle, D16300 command]
[Ingest 06:45:48 INFO] Sending XML status message
[Status 06:45:48 INFO] Mirror angle: 0
[Mirror 06:45:48 INFO] rotating to position Z
[Status 06:45:49 INFO] .SET file for ACQ96 ready
[Ingest 06:45:49 INFO] Starting acquisition
[Status 06:45:49 INFO] reading housekeeping
[Status 06:46:07 INFO] acquire complete
[Status 06:46:07 INFO] writing housekeeping
[Sequencer 06:46:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:46:07 INFO] incremented Z scene to 125 completed views
[Sequencer 06:46:07 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:46:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:46:07 INFO] incremented to [AERI set: name A126, 6 scans, 120 angle, D28300 command] set
[sigmove 06:46:07 INFO] Z125.SIG(18)
[sigmove 06:46:07 DEBUG] transformed Z125Ma.SPC -> Z125MA.SPC
[sigmove 06:46:07 DEBUG] transformed Z125Mb.SPC -> Z125MB.SPC
[sigmove 06:46:07 DEBUG] transformed Z125Mc.SPC -> Z125MC.SPC
[sigmove 06:46:07 DEBUG] transformed Z125Md.SPC -> Z125MD.SPC
[sigmove 06:46:07 DEBUG] transformed Z125Me.SPC -> Z125ME.SPC
[sigmove 06:46:07 DEBUG] transformed Z125Mf.SPC -> Z125MF.SPC
[Status 06:46:07 INFO] data for Z125 transferred to science data processing
[Tidy 06:46:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:46:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:46:07 INFO] resetting WatchDogTimer
[Status 06:46:07 INFO] Starting Set [AERI set: name A126, 6 scans, 120 angle, D28300 command]
[Ingest 06:46:07 INFO] Sending XML status message
[Status 06:46:07 INFO] Mirror angle: 120
[Mirror 06:46:08 INFO] rotating to position A
[Status 06:46:09 INFO] .SET file for ACQ96 ready
[Ingest 06:46:09 INFO] Starting acquisition
[Status 06:46:09 INFO] reading housekeeping
[Status 06:46:27 INFO] acquire complete
[Status 06:46:27 INFO] writing housekeeping
[Sequencer 06:46:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:46:27 INFO] incremented A scene to 126 completed views
[Sequencer 06:46:27 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:46:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:46:27 INFO] incremented to [AERI set: name H126, 6 scans, 60 angle, D22500 command] set
[sigmove 06:46:27 INFO] A126.SIG(18)
[sigmove 06:46:27 DEBUG] transformed A126Ma.SPC -> A126MA.SPC
[sigmove 06:46:27 DEBUG] transformed A126Mb.SPC -> A126MB.SPC
[sigmove 06:46:27 DEBUG] transformed A126Mc.SPC -> A126MC.SPC
[sigmove 06:46:27 DEBUG] transformed A126Md.SPC -> A126MD.SPC
[sigmove 06:46:27 DEBUG] transformed A126Me.SPC -> A126ME.SPC
[sigmove 06:46:27 DEBUG] transformed A126Mf.SPC -> A126MF.SPC
[Status 06:46:27 INFO] data for A126 transferred to science data processing
[Tidy 06:46:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:46:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:46:27 INFO] resetting WatchDogTimer
[Status 06:46:28 INFO] Starting Set [AERI set: name H126, 6 scans, 60 angle, D22500 command]
[Ingest 06:46:28 INFO] Sending XML status message
[Status 06:46:28 INFO] Mirror angle: 60
[Mirror 06:46:28 INFO] rotating to position H
[Status 06:46:29 INFO] .SET file for ACQ96 ready
[Ingest 06:46:29 INFO] Starting acquisition
[Status 06:46:29 INFO] reading housekeeping
[Status 06:46:47 INFO] acquire complete
[Status 06:46:48 INFO] writing housekeeping
[Sequencer 06:46:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:46:48 INFO] incremented H scene to 126 completed views
[Sequencer 06:46:48 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:46:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:46:48 INFO] incremented to [AERI set: name S126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:46:48 INFO] H126.SIG(18)
[sigmove 06:46:48 DEBUG] transformed H126Ma.SPC -> H126MA.SPC
[sigmove 06:46:48 DEBUG] transformed H126Mb.SPC -> H126MB.SPC
[sigmove 06:46:48 DEBUG] transformed H126Mc.SPC -> H126MC.SPC
[sigmove 06:46:48 DEBUG] transformed H126Md.SPC -> H126MD.SPC
[sigmove 06:46:48 DEBUG] transformed H126Me.SPC -> H126ME.SPC
[sigmove 06:46:48 DEBUG] transformed H126Mf.SPC -> H126MF.SPC
[Status 06:46:48 INFO] data for H126 transferred to science data processing
[Tidy 06:46:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:46:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:46:48 INFO] resetting WatchDogTimer
[Status 06:46:48 INFO] Starting Set [AERI set: name S126, 6 scans, 0 angle, D16300 command]
[Ingest 06:46:48 INFO] Sending XML status message
[Status 06:46:48 INFO] Mirror angle: 0
[Mirror 06:46:48 INFO] rotating to position S
[Status 06:46:49 INFO] .SET file for ACQ96 ready
[Ingest 06:46:49 INFO] Starting acquisition
[Status 06:46:49 INFO] reading housekeeping
[Status 06:47:07 INFO] acquire complete
[Status 06:47:08 INFO] writing housekeeping
[Sequencer 06:47:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:47:08 INFO] incremented S scene to 126 completed views
[Sequencer 06:47:08 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:47:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:47:08 INFO] incremented to [AERI set: name T126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:47:08 INFO] S126.SIG(18)
[sigmove 06:47:08 DEBUG] transformed S126Ma.SPC -> S126MA.SPC
[sigmove 06:47:08 DEBUG] transformed S126Mb.SPC -> S126MB.SPC
[sigmove 06:47:08 DEBUG] transformed S126Mc.SPC -> S126MC.SPC
[sigmove 06:47:08 DEBUG] transformed S126Md.SPC -> S126MD.SPC
[sigmove 06:47:08 DEBUG] transformed S126Me.SPC -> S126ME.SPC
[sigmove 06:47:08 DEBUG] transformed S126Mf.SPC -> S126MF.SPC
[Status 06:47:08 INFO] data for S126 transferred to science data processing
[Tidy 06:47:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:47:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:47:08 INFO] resetting WatchDogTimer
[Status 06:47:08 INFO] Starting Set [AERI set: name T126, 6 scans, 0 angle, D16300 command]
[Ingest 06:47:08 INFO] Sending XML status message
[Status 06:47:08 INFO] Mirror angle: 0
[Mirror 06:47:08 INFO] rotating to position T
[Status 06:47:08 INFO] .SET file for ACQ96 ready
[Ingest 06:47:09 INFO] Starting acquisition
[Status 06:47:09 INFO] reading housekeeping
[Status 06:47:26 INFO] acquire complete
[Status 06:47:27 INFO] writing housekeeping
[Sequencer 06:47:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:47:27 INFO] incremented T scene to 126 completed views
[Sequencer 06:47:27 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:47:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:47:27 INFO] incremented to [AERI set: name U126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:47:27 INFO] T126.SIG(18)
[sigmove 06:47:27 DEBUG] transformed T126Ma.SPC -> T126MA.SPC
[sigmove 06:47:27 DEBUG] transformed T126Mb.SPC -> T126MB.SPC
[sigmove 06:47:27 DEBUG] transformed T126Mc.SPC -> T126MC.SPC
[sigmove 06:47:27 DEBUG] transformed T126Md.SPC -> T126MD.SPC
[sigmove 06:47:27 DEBUG] transformed T126Me.SPC -> T126ME.SPC
[sigmove 06:47:27 DEBUG] transformed T126Mf.SPC -> T126MF.SPC
[Status 06:47:27 INFO] data for T126 transferred to science data processing
[Tidy 06:47:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:47:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:47:27 INFO] resetting WatchDogTimer
[Status 06:47:27 INFO] Starting Set [AERI set: name U126, 6 scans, 0 angle, D16300 command]
[Ingest 06:47:27 INFO] Sending XML status message
[Status 06:47:27 INFO] Mirror angle: 0
[Mirror 06:47:27 INFO] rotating to position U
[Status 06:47:27 INFO] .SET file for ACQ96 ready
[Ingest 06:47:28 INFO] Starting acquisition
[Status 06:47:28 INFO] reading housekeeping
[Status 06:47:45 INFO] acquire complete
[Status 06:47:46 INFO] writing housekeeping
[Sequencer 06:47:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:47:46 INFO] incremented U scene to 126 completed views
[Sequencer 06:47:46 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:47:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:47:46 INFO] incremented to [AERI set: name V126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:47:46 INFO] U126.SIG(18)
[sigmove 06:47:46 DEBUG] transformed U126Ma.SPC -> U126MA.SPC
[sigmove 06:47:46 DEBUG] transformed U126Mb.SPC -> U126MB.SPC
[sigmove 06:47:46 DEBUG] transformed U126Mc.SPC -> U126MC.SPC
[sigmove 06:47:46 DEBUG] transformed U126Md.SPC -> U126MD.SPC
[sigmove 06:47:46 DEBUG] transformed U126Me.SPC -> U126ME.SPC
[sigmove 06:47:46 DEBUG] transformed U126Mf.SPC -> U126MF.SPC
[Status 06:47:46 INFO] data for U126 transferred to science data processing
[Tidy 06:47:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:47:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:47:46 INFO] resetting WatchDogTimer
[Status 06:47:46 INFO] Starting Set [AERI set: name V126, 6 scans, 0 angle, D16300 command]
[Ingest 06:47:46 INFO] Sending XML status message
[Status 06:47:46 INFO] Mirror angle: 0
[Mirror 06:47:46 INFO] rotating to position V
[Status 06:47:47 INFO] .SET file for ACQ96 ready
[Ingest 06:47:47 INFO] Starting acquisition
[Status 06:47:47 INFO] reading housekeeping
[Status 06:48:04 INFO] acquire complete
[Status 06:48:05 INFO] writing housekeeping
[Sequencer 06:48:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:48:05 INFO] incremented V scene to 126 completed views
[Sequencer 06:48:05 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:48:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:48:05 INFO] incremented to [AERI set: name W126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:48:05 INFO] V126.SIG(18)
[sigmove 06:48:05 DEBUG] transformed V126Ma.SPC -> V126MA.SPC
[sigmove 06:48:05 DEBUG] transformed V126Mb.SPC -> V126MB.SPC
[sigmove 06:48:05 DEBUG] transformed V126Mc.SPC -> V126MC.SPC
[sigmove 06:48:05 DEBUG] transformed V126Md.SPC -> V126MD.SPC
[sigmove 06:48:05 DEBUG] transformed V126Me.SPC -> V126ME.SPC
[sigmove 06:48:05 DEBUG] transformed V126Mf.SPC -> V126MF.SPC
[Status 06:48:05 INFO] data for V126 transferred to science data processing
[Tidy 06:48:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:48:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:48:05 INFO] resetting WatchDogTimer
[Status 06:48:05 INFO] Starting Set [AERI set: name W126, 6 scans, 0 angle, D16300 command]
[Ingest 06:48:05 INFO] Sending XML status message
[Status 06:48:05 INFO] Mirror angle: 0
[Mirror 06:48:05 INFO] rotating to position W
[Status 06:48:06 INFO] .SET file for ACQ96 ready
[Ingest 06:48:06 INFO] Starting acquisition
[Status 06:48:06 INFO] reading housekeeping
[Status 06:48:24 INFO] acquire complete
[Status 06:48:24 INFO] writing housekeeping
[Sequencer 06:48:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:48:24 INFO] incremented W scene to 126 completed views
[Sequencer 06:48:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:48:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:48:24 INFO] incremented to [AERI set: name X126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:48:24 INFO] W126.SIG(18)
[sigmove 06:48:24 DEBUG] transformed W126Ma.SPC -> W126MA.SPC
[sigmove 06:48:24 DEBUG] transformed W126Mb.SPC -> W126MB.SPC
[sigmove 06:48:24 DEBUG] transformed W126Mc.SPC -> W126MC.SPC
[sigmove 06:48:24 DEBUG] transformed W126Md.SPC -> W126MD.SPC
[sigmove 06:48:24 DEBUG] transformed W126Me.SPC -> W126ME.SPC
[sigmove 06:48:24 DEBUG] transformed W126Mf.SPC -> W126MF.SPC
[Status 06:48:24 INFO] data for W126 transferred to science data processing
[Tidy 06:48:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:48:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:48:24 INFO] resetting WatchDogTimer
[Status 06:48:24 INFO] Starting Set [AERI set: name X126, 6 scans, 0 angle, D16300 command]
[Ingest 06:48:24 INFO] Sending XML status message
[Status 06:48:24 INFO] Mirror angle: 0
[Mirror 06:48:25 INFO] rotating to position X
[Status 06:48:25 INFO] .SET file for ACQ96 ready
[Ingest 06:48:25 INFO] Starting acquisition
[Status 06:48:25 INFO] reading housekeeping
[Status 06:48:43 INFO] acquire complete
[Status 06:48:43 INFO] writing housekeeping
[Sequencer 06:48:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:48:43 INFO] incremented X scene to 126 completed views
[Sequencer 06:48:43 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:48:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:48:43 INFO] incremented to [AERI set: name Y126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:48:43 INFO] X126.SIG(18)
[sigmove 06:48:43 DEBUG] transformed X126Ma.SPC -> X126MA.SPC
[sigmove 06:48:43 DEBUG] transformed X126Mb.SPC -> X126MB.SPC
[sigmove 06:48:43 DEBUG] transformed X126Mc.SPC -> X126MC.SPC
[sigmove 06:48:43 DEBUG] transformed X126Md.SPC -> X126MD.SPC
[sigmove 06:48:43 DEBUG] transformed X126Me.SPC -> X126ME.SPC
[sigmove 06:48:43 DEBUG] transformed X126Mf.SPC -> X126MF.SPC
[Status 06:48:43 INFO] data for X126 transferred to science data processing
[Tidy 06:48:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:48:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:48:43 INFO] resetting WatchDogTimer
[Status 06:48:43 INFO] Starting Set [AERI set: name Y126, 6 scans, 0 angle, D16300 command]
[Ingest 06:48:43 INFO] Sending XML status message
[Status 06:48:43 INFO] Mirror angle: 0
[Mirror 06:48:44 INFO] rotating to position Y
[Status 06:48:44 INFO] .SET file for ACQ96 ready
[Ingest 06:48:44 INFO] Starting acquisition
[Status 06:48:44 INFO] reading housekeeping
[Status 06:49:02 INFO] acquire complete
[Status 06:49:02 INFO] writing housekeeping
[Sequencer 06:49:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:49:02 INFO] incremented Y scene to 126 completed views
[Sequencer 06:49:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:49:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:49:02 INFO] incremented to [AERI set: name Z126, 6 scans, 0 angle, D16300 command] set
[sigmove 06:49:02 INFO] Y126.SIG(18)
[sigmove 06:49:02 DEBUG] transformed Y126Ma.SPC -> Y126MA.SPC
[sigmove 06:49:02 DEBUG] transformed Y126Mb.SPC -> Y126MB.SPC
[sigmove 06:49:02 DEBUG] transformed Y126Mc.SPC -> Y126MC.SPC
[sigmove 06:49:02 DEBUG] transformed Y126Md.SPC -> Y126MD.SPC
[sigmove 06:49:02 DEBUG] transformed Y126Me.SPC -> Y126ME.SPC
[sigmove 06:49:02 DEBUG] transformed Y126Mf.SPC -> Y126MF.SPC
[Status 06:49:02 INFO] data for Y126 transferred to science data processing
[Tidy 06:49:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:49:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:49:02 INFO] resetting WatchDogTimer
[Status 06:49:02 INFO] Starting Set [AERI set: name Z126, 6 scans, 0 angle, D16300 command]
[Ingest 06:49:02 INFO] Sending XML status message
[Status 06:49:02 INFO] Mirror angle: 0
[Mirror 06:49:03 INFO] rotating to position Z
[Status 06:49:03 INFO] .SET file for ACQ96 ready
[Ingest 06:49:03 INFO] Starting acquisition
[Status 06:49:03 INFO] reading housekeeping
[Status 06:49:21 INFO] acquire complete
[Status 06:49:21 INFO] writing housekeeping
[Sequencer 06:49:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:49:21 INFO] incremented Z scene to 126 completed views
[Sequencer 06:49:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:49:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:49:21 INFO] incremented to [AERI set: name H127, 6 scans, 60 angle, D22500 command] set
[sigmove 06:49:21 INFO] Z126.SIG(18)
[sigmove 06:49:21 DEBUG] transformed Z126Ma.SPC -> Z126MA.SPC
[sigmove 06:49:21 DEBUG] transformed Z126Mb.SPC -> Z126MB.SPC
[sigmove 06:49:21 DEBUG] transformed Z126Mc.SPC -> Z126MC.SPC
[sigmove 06:49:21 DEBUG] transformed Z126Md.SPC -> Z126MD.SPC
[sigmove 06:49:21 DEBUG] transformed Z126Me.SPC -> Z126ME.SPC
[sigmove 06:49:21 DEBUG] transformed Z126Mf.SPC -> Z126MF.SPC
[Status 06:49:21 INFO] data for Z126 transferred to science data processing
[Tidy 06:49:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:49:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:49:21 INFO] resetting WatchDogTimer
[Status 06:49:22 INFO] Starting Set [AERI set: name H127, 6 scans, 60 angle, D22500 command]
[Ingest 06:49:22 INFO] Sending XML status message
[Status 06:49:22 INFO] Mirror angle: 60
[Mirror 06:49:22 INFO] rotating to position H
[Status 06:49:23 INFO] .SET file for ACQ96 ready
[Ingest 06:49:23 INFO] Starting acquisition
[Status 06:49:23 INFO] reading housekeeping
[Status 06:49:41 INFO] acquire complete
[Status 06:49:42 INFO] writing housekeeping
[Sequencer 06:49:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:49:42 INFO] incremented H scene to 127 completed views
[Sequencer 06:49:42 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:49:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:49:42 INFO] incremented to [AERI set: name A127, 6 scans, 120 angle, D28300 command] set
[sigmove 06:49:42 INFO] H127.SIG(18)
[sigmove 06:49:42 DEBUG] transformed H127Ma.SPC -> H127MA.SPC
[sigmove 06:49:42 DEBUG] transformed H127Mb.SPC -> H127MB.SPC
[sigmove 06:49:42 DEBUG] transformed H127Mc.SPC -> H127MC.SPC
[sigmove 06:49:42 DEBUG] transformed H127Md.SPC -> H127MD.SPC
[sigmove 06:49:42 DEBUG] transformed H127Me.SPC -> H127ME.SPC
[sigmove 06:49:42 DEBUG] transformed H127Mf.SPC -> H127MF.SPC
[Status 06:49:42 INFO] data for H127 transferred to science data processing
[Tidy 06:49:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:49:42 INFO] A125.FIN(19),H125.FIN(19),S125.FIN(19),T125.FIN(19),U125.FIN(19),V125.FIN(19),W125.FIN(19),X125.FIN(19),Y125.FIN(19),Z125.FIN(19),A126.FIN(19),H126.FIN(19),S126.FIN(19),T126.FIN(19),U126.FIN(19),V126.FIN(19),W126.FIN(19),X126.FIN(19),Y126.FIN(19),Z126.FIN(19)
[sigmove 06:49:42 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:49:42 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:49:44 DEBUG] done zipping
[WatchDog 06:49:44 INFO] resetting WatchDogTimer
[Status 06:49:44 INFO] Starting Set [AERI set: name A127, 6 scans, 120 angle, D28300 command]
[Ingest 06:49:44 INFO] Sending XML status message
[Status 06:49:44 INFO] Mirror angle: 120
[Mirror 06:49:44 INFO] rotating to position A
[Status 06:49:45 INFO] .SET file for ACQ96 ready
[Ingest 06:49:45 INFO] Starting acquisition
[Status 06:49:46 INFO] reading housekeeping
[Status 06:50:03 INFO] acquire complete
[Status 06:50:04 INFO] writing housekeeping
[Sequencer 06:50:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:50:04 INFO] incremented A scene to 127 completed views
[Sequencer 06:50:04 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:50:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:50:04 INFO] incremented to [AERI set: name S127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:50:04 INFO] A127.SIG(18)
[sigmove 06:50:04 DEBUG] transformed A127Ma.SPC -> A127MA.SPC
[sigmove 06:50:04 DEBUG] transformed A127Mb.SPC -> A127MB.SPC
[sigmove 06:50:04 DEBUG] transformed A127Mc.SPC -> A127MC.SPC
[sigmove 06:50:04 DEBUG] transformed A127Md.SPC -> A127MD.SPC
[sigmove 06:50:04 DEBUG] transformed A127Me.SPC -> A127ME.SPC
[sigmove 06:50:04 DEBUG] transformed A127Mf.SPC -> A127MF.SPC
[Status 06:50:04 INFO] data for A127 transferred to science data processing
[Tidy 06:50:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:50:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:50:04 INFO] resetting WatchDogTimer
[Status 06:50:04 INFO] Starting Set [AERI set: name S127, 6 scans, 0 angle, D16300 command]
[Ingest 06:50:04 INFO] Sending XML status message
[Status 06:50:04 INFO] Mirror angle: 0
[Mirror 06:50:04 INFO] rotating to position S
[Status 06:50:06 INFO] .SET file for ACQ96 ready
[Ingest 06:50:06 INFO] Starting acquisition
[Status 06:50:06 INFO] reading housekeeping
[Status 06:50:24 INFO] acquire complete
[Status 06:50:24 INFO] writing housekeeping
[Sequencer 06:50:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:50:24 INFO] incremented S scene to 127 completed views
[Sequencer 06:50:24 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:50:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:50:24 INFO] incremented to [AERI set: name T127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:50:24 INFO] S127.SIG(18)
[sigmove 06:50:24 DEBUG] transformed S127Ma.SPC -> S127MA.SPC
[sigmove 06:50:24 DEBUG] transformed S127Mb.SPC -> S127MB.SPC
[sigmove 06:50:24 DEBUG] transformed S127Mc.SPC -> S127MC.SPC
[sigmove 06:50:24 DEBUG] transformed S127Md.SPC -> S127MD.SPC
[sigmove 06:50:24 DEBUG] transformed S127Me.SPC -> S127ME.SPC
[sigmove 06:50:24 DEBUG] transformed S127Mf.SPC -> S127MF.SPC
[Status 06:50:24 INFO] data for S127 transferred to science data processing
[Tidy 06:50:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:50:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:50:24 INFO] resetting WatchDogTimer
[Status 06:50:24 INFO] Starting Set [AERI set: name T127, 6 scans, 0 angle, D16300 command]
[Ingest 06:50:24 INFO] Sending XML status message
[Status 06:50:24 INFO] Mirror angle: 0
[Mirror 06:50:25 INFO] rotating to position T
[Status 06:50:25 INFO] .SET file for ACQ96 ready
[Ingest 06:50:25 INFO] Starting acquisition
[Status 06:50:25 INFO] reading housekeeping
[Status 06:50:43 INFO] acquire complete
[Status 06:50:43 INFO] writing housekeeping
[Sequencer 06:50:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:50:43 INFO] incremented T scene to 127 completed views
[Sequencer 06:50:43 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:50:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:50:43 INFO] incremented to [AERI set: name U127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:50:43 INFO] T127.SIG(18)
[sigmove 06:50:43 DEBUG] transformed T127Ma.SPC -> T127MA.SPC
[sigmove 06:50:43 DEBUG] transformed T127Mb.SPC -> T127MB.SPC
[sigmove 06:50:43 DEBUG] transformed T127Mc.SPC -> T127MC.SPC
[sigmove 06:50:43 DEBUG] transformed T127Md.SPC -> T127MD.SPC
[sigmove 06:50:43 DEBUG] transformed T127Me.SPC -> T127ME.SPC
[sigmove 06:50:43 DEBUG] transformed T127Mf.SPC -> T127MF.SPC
[Status 06:50:43 INFO] data for T127 transferred to science data processing
[Tidy 06:50:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:50:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:50:43 INFO] resetting WatchDogTimer
[Status 06:50:43 INFO] Starting Set [AERI set: name U127, 6 scans, 0 angle, D16300 command]
[Ingest 06:50:43 INFO] Sending XML status message
[Status 06:50:43 INFO] Mirror angle: 0
[Mirror 06:50:44 INFO] rotating to position U
[Status 06:50:44 INFO] .SET file for ACQ96 ready
[Ingest 06:50:44 INFO] Starting acquisition
[Status 06:50:44 INFO] reading housekeeping
[Status 06:51:02 INFO] acquire complete
[Status 06:51:02 INFO] writing housekeeping
[Sequencer 06:51:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:51:02 INFO] incremented U scene to 127 completed views
[Sequencer 06:51:02 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:51:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:51:02 INFO] incremented to [AERI set: name V127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:51:02 INFO] U127.SIG(18)
[sigmove 06:51:02 DEBUG] transformed U127Ma.SPC -> U127MA.SPC
[sigmove 06:51:02 DEBUG] transformed U127Mb.SPC -> U127MB.SPC
[sigmove 06:51:02 DEBUG] transformed U127Mc.SPC -> U127MC.SPC
[sigmove 06:51:02 DEBUG] transformed U127Md.SPC -> U127MD.SPC
[sigmove 06:51:02 DEBUG] transformed U127Me.SPC -> U127ME.SPC
[sigmove 06:51:02 DEBUG] transformed U127Mf.SPC -> U127MF.SPC
[Status 06:51:02 INFO] data for U127 transferred to science data processing
[Tidy 06:51:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:51:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:51:02 INFO] resetting WatchDogTimer
[Status 06:51:03 INFO] Starting Set [AERI set: name V127, 6 scans, 0 angle, D16300 command]
[Ingest 06:51:03 INFO] Sending XML status message
[Status 06:51:03 INFO] Mirror angle: 0
[Mirror 06:51:03 INFO] rotating to position V
[Status 06:51:03 INFO] .SET file for ACQ96 ready
[Ingest 06:51:03 INFO] Starting acquisition
[Status 06:51:03 INFO] reading housekeeping
[Status 06:51:21 INFO] acquire complete
[Status 06:51:21 INFO] writing housekeeping
[Sequencer 06:51:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:51:21 INFO] incremented V scene to 127 completed views
[Sequencer 06:51:21 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:51:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:51:21 INFO] incremented to [AERI set: name W127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:51:21 INFO] V127.SIG(18)
[sigmove 06:51:21 DEBUG] transformed V127Ma.SPC -> V127MA.SPC
[sigmove 06:51:21 DEBUG] transformed V127Mb.SPC -> V127MB.SPC
[sigmove 06:51:21 DEBUG] transformed V127Mc.SPC -> V127MC.SPC
[sigmove 06:51:21 DEBUG] transformed V127Md.SPC -> V127MD.SPC
[sigmove 06:51:21 DEBUG] transformed V127Me.SPC -> V127ME.SPC
[sigmove 06:51:21 DEBUG] transformed V127Mf.SPC -> V127MF.SPC
[Status 06:51:21 INFO] data for V127 transferred to science data processing
[Tidy 06:51:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:51:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:51:21 INFO] resetting WatchDogTimer
[Status 06:51:22 INFO] Starting Set [AERI set: name W127, 6 scans, 0 angle, D16300 command]
[Ingest 06:51:22 INFO] Sending XML status message
[Status 06:51:22 INFO] Mirror angle: 0
[Mirror 06:51:22 INFO] rotating to position W
[Status 06:51:22 INFO] .SET file for ACQ96 ready
[Ingest 06:51:22 INFO] Starting acquisition
[Status 06:51:22 INFO] reading housekeeping
[Status 06:51:40 INFO] acquire complete
[Status 06:51:41 INFO] writing housekeeping
[Sequencer 06:51:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:51:41 INFO] incremented W scene to 127 completed views
[Sequencer 06:51:41 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:51:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:51:41 INFO] incremented to [AERI set: name X127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:51:41 INFO] W127.SIG(18)
[sigmove 06:51:41 DEBUG] transformed W127Ma.SPC -> W127MA.SPC
[sigmove 06:51:41 DEBUG] transformed W127Mb.SPC -> W127MB.SPC
[sigmove 06:51:41 DEBUG] transformed W127Mc.SPC -> W127MC.SPC
[sigmove 06:51:41 DEBUG] transformed W127Md.SPC -> W127MD.SPC
[sigmove 06:51:41 DEBUG] transformed W127Me.SPC -> W127ME.SPC
[sigmove 06:51:41 DEBUG] transformed W127Mf.SPC -> W127MF.SPC
[Status 06:51:41 INFO] data for W127 transferred to science data processing
[Tidy 06:51:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:51:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:51:41 INFO] resetting WatchDogTimer
[Status 06:51:41 INFO] Starting Set [AERI set: name X127, 6 scans, 0 angle, D16300 command]
[Ingest 06:51:41 INFO] Sending XML status message
[Status 06:51:41 INFO] Mirror angle: 0
[Mirror 06:51:41 INFO] rotating to position X
[Status 06:51:41 INFO] .SET file for ACQ96 ready
[Ingest 06:51:41 INFO] Starting acquisition
[Status 06:51:41 INFO] reading housekeeping
[Status 06:51:59 INFO] acquire complete
[Status 06:52:00 INFO] writing housekeeping
[Sequencer 06:52:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:52:00 INFO] incremented X scene to 127 completed views
[Sequencer 06:52:00 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:52:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:52:00 INFO] incremented to [AERI set: name Y127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:52:00 INFO] X127.SIG(18)
[sigmove 06:52:00 DEBUG] transformed X127Ma.SPC -> X127MA.SPC
[sigmove 06:52:00 DEBUG] transformed X127Mb.SPC -> X127MB.SPC
[sigmove 06:52:00 DEBUG] transformed X127Mc.SPC -> X127MC.SPC
[sigmove 06:52:00 DEBUG] transformed X127Md.SPC -> X127MD.SPC
[sigmove 06:52:00 DEBUG] transformed X127Me.SPC -> X127ME.SPC
[sigmove 06:52:00 DEBUG] transformed X127Mf.SPC -> X127MF.SPC
[Status 06:52:00 INFO] data for X127 transferred to science data processing
[Tidy 06:52:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:52:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:52:00 INFO] resetting WatchDogTimer
[Status 06:52:00 INFO] Starting Set [AERI set: name Y127, 6 scans, 0 angle, D16300 command]
[Ingest 06:52:00 INFO] Sending XML status message
[Status 06:52:00 INFO] Mirror angle: 0
[Mirror 06:52:00 INFO] rotating to position Y
[Status 06:52:00 INFO] .SET file for ACQ96 ready
[Ingest 06:52:00 INFO] Starting acquisition
[Status 06:52:01 INFO] reading housekeeping
[Status 06:52:18 INFO] acquire complete
[Status 06:52:19 INFO] writing housekeeping
[Sequencer 06:52:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:52:19 INFO] incremented Y scene to 127 completed views
[Sequencer 06:52:19 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:52:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:52:19 INFO] incremented to [AERI set: name Z127, 6 scans, 0 angle, D16300 command] set
[sigmove 06:52:19 INFO] Y127.SIG(18)
[sigmove 06:52:19 DEBUG] transformed Y127Ma.SPC -> Y127MA.SPC
[sigmove 06:52:19 DEBUG] transformed Y127Mb.SPC -> Y127MB.SPC
[sigmove 06:52:19 DEBUG] transformed Y127Mc.SPC -> Y127MC.SPC
[sigmove 06:52:19 DEBUG] transformed Y127Md.SPC -> Y127MD.SPC
[sigmove 06:52:19 DEBUG] transformed Y127Me.SPC -> Y127ME.SPC
[sigmove 06:52:19 DEBUG] transformed Y127Mf.SPC -> Y127MF.SPC
[Status 06:52:19 INFO] data for Y127 transferred to science data processing
[Tidy 06:52:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:52:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:52:19 INFO] resetting WatchDogTimer
[Status 06:52:19 INFO] Starting Set [AERI set: name Z127, 6 scans, 0 angle, D16300 command]
[Ingest 06:52:19 INFO] Sending XML status message
[Status 06:52:19 INFO] Mirror angle: 0
[Mirror 06:52:19 INFO] rotating to position Z
[Status 06:52:19 INFO] .SET file for ACQ96 ready
[Ingest 06:52:19 INFO] Starting acquisition
[Status 06:52:20 INFO] reading housekeeping
[Status 06:52:37 INFO] acquire complete
[Status 06:52:38 INFO] writing housekeeping
[Sequencer 06:52:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:52:38 INFO] incremented Z scene to 127 completed views
[Sequencer 06:52:38 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:52:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:52:38 INFO] incremented to [AERI set: name A128, 6 scans, 120 angle, D28300 command] set
[sigmove 06:52:38 INFO] Z127.SIG(18)
[sigmove 06:52:38 DEBUG] transformed Z127Ma.SPC -> Z127MA.SPC
[sigmove 06:52:38 DEBUG] transformed Z127Mb.SPC -> Z127MB.SPC
[sigmove 06:52:38 DEBUG] transformed Z127Mc.SPC -> Z127MC.SPC
[sigmove 06:52:38 DEBUG] transformed Z127Md.SPC -> Z127MD.SPC
[sigmove 06:52:38 DEBUG] transformed Z127Me.SPC -> Z127ME.SPC
[sigmove 06:52:38 DEBUG] transformed Z127Mf.SPC -> Z127MF.SPC
[Status 06:52:38 INFO] data for Z127 transferred to science data processing
[Tidy 06:52:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:52:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:52:38 INFO] resetting WatchDogTimer
[Status 06:52:38 INFO] Starting Set [AERI set: name A128, 6 scans, 120 angle, D28300 command]
[Ingest 06:52:38 INFO] Sending XML status message
[Status 06:52:38 INFO] Mirror angle: 120
[Mirror 06:52:38 INFO] rotating to position A
[Status 06:52:39 INFO] .SET file for ACQ96 ready
[Ingest 06:52:40 INFO] Starting acquisition
[Status 06:52:40 INFO] reading housekeeping
[Status 06:52:57 INFO] acquire complete
[Status 06:52:58 INFO] writing housekeeping
[Sequencer 06:52:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:52:58 INFO] incremented A scene to 128 completed views
[Sequencer 06:52:58 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:52:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:52:58 INFO] incremented to [AERI set: name H128, 6 scans, 60 angle, D22500 command] set
[sigmove 06:52:58 INFO] A128.SIG(18)
[sigmove 06:52:58 DEBUG] transformed A128Ma.SPC -> A128MA.SPC
[sigmove 06:52:58 DEBUG] transformed A128Mb.SPC -> A128MB.SPC
[sigmove 06:52:58 DEBUG] transformed A128Mc.SPC -> A128MC.SPC
[sigmove 06:52:58 DEBUG] transformed A128Md.SPC -> A128MD.SPC
[sigmove 06:52:58 DEBUG] transformed A128Me.SPC -> A128ME.SPC
[sigmove 06:52:58 DEBUG] transformed A128Mf.SPC -> A128MF.SPC
[Status 06:52:58 INFO] data for A128 transferred to science data processing
[Tidy 06:52:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:52:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:52:58 INFO] resetting WatchDogTimer
[Status 06:52:58 INFO] Starting Set [AERI set: name H128, 6 scans, 60 angle, D22500 command]
[Ingest 06:52:58 INFO] Sending XML status message
[Status 06:52:58 INFO] Mirror angle: 60
[Mirror 06:52:58 INFO] rotating to position H
[Status 06:52:59 INFO] .SET file for ACQ96 ready
[Ingest 06:52:59 INFO] Starting acquisition
[Status 06:52:59 INFO] reading housekeeping
[Status 06:53:18 INFO] acquire complete
[Status 06:53:18 INFO] writing housekeeping
[Sequencer 06:53:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:53:18 INFO] incremented H scene to 128 completed views
[Sequencer 06:53:18 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:53:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:53:18 INFO] incremented to [AERI set: name S128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:53:18 INFO] H128.SIG(18)
[sigmove 06:53:18 DEBUG] transformed H128Ma.SPC -> H128MA.SPC
[sigmove 06:53:18 DEBUG] transformed H128Mb.SPC -> H128MB.SPC
[sigmove 06:53:18 DEBUG] transformed H128Mc.SPC -> H128MC.SPC
[sigmove 06:53:18 DEBUG] transformed H128Md.SPC -> H128MD.SPC
[sigmove 06:53:18 DEBUG] transformed H128Me.SPC -> H128ME.SPC
[sigmove 06:53:18 DEBUG] transformed H128Mf.SPC -> H128MF.SPC
[Status 06:53:18 INFO] data for H128 transferred to science data processing
[Tidy 06:53:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:53:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:53:18 INFO] resetting WatchDogTimer
[Status 06:53:18 INFO] Starting Set [AERI set: name S128, 6 scans, 0 angle, D16300 command]
[Ingest 06:53:18 INFO] Sending XML status message
[Status 06:53:18 INFO] Mirror angle: 0
[Mirror 06:53:19 INFO] rotating to position S
[Status 06:53:19 INFO] .SET file for ACQ96 ready
[Ingest 06:53:20 INFO] Starting acquisition
[Status 06:53:20 INFO] reading housekeeping
[Status 06:53:38 INFO] acquire complete
[Status 06:53:38 INFO] writing housekeeping
[Sequencer 06:53:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:53:38 INFO] incremented S scene to 128 completed views
[Sequencer 06:53:38 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:53:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:53:38 INFO] incremented to [AERI set: name T128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:53:38 INFO] S128.SIG(18)
[sigmove 06:53:38 DEBUG] transformed S128Ma.SPC -> S128MA.SPC
[sigmove 06:53:38 DEBUG] transformed S128Mb.SPC -> S128MB.SPC
[sigmove 06:53:38 DEBUG] transformed S128Mc.SPC -> S128MC.SPC
[sigmove 06:53:38 DEBUG] transformed S128Md.SPC -> S128MD.SPC
[sigmove 06:53:38 DEBUG] transformed S128Me.SPC -> S128ME.SPC
[sigmove 06:53:38 DEBUG] transformed S128Mf.SPC -> S128MF.SPC
[Status 06:53:38 INFO] data for S128 transferred to science data processing
[Tidy 06:53:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:53:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:53:38 INFO] resetting WatchDogTimer
[Status 06:53:39 INFO] Starting Set [AERI set: name T128, 6 scans, 0 angle, D16300 command]
[Ingest 06:53:39 INFO] Sending XML status message
[Status 06:53:39 INFO] Mirror angle: 0
[Mirror 06:53:39 INFO] rotating to position T
[Status 06:53:39 INFO] .SET file for ACQ96 ready
[Ingest 06:53:39 INFO] Starting acquisition
[Status 06:53:39 INFO] reading housekeeping
[Status 06:53:57 INFO] acquire complete
[Status 06:53:57 INFO] writing housekeeping
[Sequencer 06:53:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:53:57 INFO] incremented T scene to 128 completed views
[Sequencer 06:53:57 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:53:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:53:57 INFO] incremented to [AERI set: name U128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:53:57 INFO] T128.SIG(18)
[sigmove 06:53:57 DEBUG] transformed T128Ma.SPC -> T128MA.SPC
[sigmove 06:53:57 DEBUG] transformed T128Mb.SPC -> T128MB.SPC
[sigmove 06:53:57 DEBUG] transformed T128Mc.SPC -> T128MC.SPC
[sigmove 06:53:57 DEBUG] transformed T128Md.SPC -> T128MD.SPC
[sigmove 06:53:57 DEBUG] transformed T128Me.SPC -> T128ME.SPC
[sigmove 06:53:57 DEBUG] transformed T128Mf.SPC -> T128MF.SPC
[Status 06:53:57 INFO] data for T128 transferred to science data processing
[Tidy 06:53:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:53:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:53:57 INFO] resetting WatchDogTimer
[Status 06:53:58 INFO] Starting Set [AERI set: name U128, 6 scans, 0 angle, D16300 command]
[Ingest 06:53:58 INFO] Sending XML status message
[Status 06:53:58 INFO] Mirror angle: 0
[Mirror 06:53:58 INFO] rotating to position U
[Status 06:53:58 INFO] .SET file for ACQ96 ready
[Ingest 06:53:58 INFO] Starting acquisition
[Status 06:53:58 INFO] reading housekeeping
[Status 06:54:16 INFO] acquire complete
[Status 06:54:17 INFO] writing housekeeping
[Sequencer 06:54:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:54:17 INFO] incremented U scene to 128 completed views
[Sequencer 06:54:17 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:54:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:54:17 INFO] incremented to [AERI set: name V128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:54:17 INFO] U128.SIG(18)
[sigmove 06:54:17 DEBUG] transformed U128Ma.SPC -> U128MA.SPC
[sigmove 06:54:17 DEBUG] transformed U128Mb.SPC -> U128MB.SPC
[sigmove 06:54:17 DEBUG] transformed U128Mc.SPC -> U128MC.SPC
[sigmove 06:54:17 DEBUG] transformed U128Md.SPC -> U128MD.SPC
[sigmove 06:54:17 DEBUG] transformed U128Me.SPC -> U128ME.SPC
[sigmove 06:54:17 DEBUG] transformed U128Mf.SPC -> U128MF.SPC
[Status 06:54:17 INFO] data for U128 transferred to science data processing
[Tidy 06:54:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:54:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:54:17 INFO] resetting WatchDogTimer
[Status 06:54:17 INFO] Starting Set [AERI set: name V128, 6 scans, 0 angle, D16300 command]
[Ingest 06:54:17 INFO] Sending XML status message
[Status 06:54:17 INFO] Mirror angle: 0
[Mirror 06:54:17 INFO] rotating to position V
[Status 06:54:17 INFO] .SET file for ACQ96 ready
[Ingest 06:54:17 INFO] Starting acquisition
[Status 06:54:17 INFO] reading housekeeping
[Status 06:54:35 INFO] acquire complete
[Status 06:54:36 INFO] writing housekeeping
[Sequencer 06:54:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:54:36 INFO] incremented V scene to 128 completed views
[Sequencer 06:54:36 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:54:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:54:36 INFO] incremented to [AERI set: name W128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:54:36 INFO] V128.SIG(18)
[sigmove 06:54:36 DEBUG] transformed V128Ma.SPC -> V128MA.SPC
[sigmove 06:54:36 DEBUG] transformed V128Mb.SPC -> V128MB.SPC
[sigmove 06:54:36 DEBUG] transformed V128Mc.SPC -> V128MC.SPC
[sigmove 06:54:36 DEBUG] transformed V128Md.SPC -> V128MD.SPC
[sigmove 06:54:36 DEBUG] transformed V128Me.SPC -> V128ME.SPC
[sigmove 06:54:36 DEBUG] transformed V128Mf.SPC -> V128MF.SPC
[Status 06:54:36 INFO] data for V128 transferred to science data processing
[Tidy 06:54:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:54:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:54:36 INFO] resetting WatchDogTimer
[Status 06:54:36 INFO] Starting Set [AERI set: name W128, 6 scans, 0 angle, D16300 command]
[Ingest 06:54:36 INFO] Sending XML status message
[Status 06:54:36 INFO] Mirror angle: 0
[Mirror 06:54:36 INFO] rotating to position W
[Status 06:54:36 INFO] .SET file for ACQ96 ready
[Ingest 06:54:36 INFO] Starting acquisition
[Status 06:54:37 INFO] reading housekeeping
[Status 06:54:54 INFO] acquire complete
[Status 06:54:55 INFO] writing housekeeping
[Sequencer 06:54:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:54:55 INFO] incremented W scene to 128 completed views
[Sequencer 06:54:55 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:54:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:54:55 INFO] incremented to [AERI set: name X128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:54:55 INFO] W128.SIG(18)
[sigmove 06:54:55 DEBUG] transformed W128Ma.SPC -> W128MA.SPC
[sigmove 06:54:55 DEBUG] transformed W128Mb.SPC -> W128MB.SPC
[sigmove 06:54:55 DEBUG] transformed W128Mc.SPC -> W128MC.SPC
[sigmove 06:54:55 DEBUG] transformed W128Md.SPC -> W128MD.SPC
[sigmove 06:54:55 DEBUG] transformed W128Me.SPC -> W128ME.SPC
[sigmove 06:54:55 DEBUG] transformed W128Mf.SPC -> W128MF.SPC
[Status 06:54:55 INFO] data for W128 transferred to science data processing
[Tidy 06:54:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:54:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:54:55 INFO] resetting WatchDogTimer
[Status 06:54:55 INFO] Starting Set [AERI set: name X128, 6 scans, 0 angle, D16300 command]
[Ingest 06:54:55 INFO] Sending XML status message
[Status 06:54:55 INFO] Mirror angle: 0
[Mirror 06:54:55 INFO] rotating to position X
[Status 06:54:55 INFO] .SET file for ACQ96 ready
[Ingest 06:54:55 INFO] Starting acquisition
[Status 06:54:56 INFO] reading housekeeping
[Status 06:55:13 INFO] acquire complete
[Status 06:55:14 INFO] writing housekeeping
[Sequencer 06:55:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:55:14 INFO] incremented X scene to 128 completed views
[Sequencer 06:55:14 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:55:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:55:14 INFO] incremented to [AERI set: name Y128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:55:14 INFO] X128.SIG(18)
[sigmove 06:55:14 DEBUG] transformed X128Ma.SPC -> X128MA.SPC
[sigmove 06:55:14 DEBUG] transformed X128Mb.SPC -> X128MB.SPC
[sigmove 06:55:14 DEBUG] transformed X128Mc.SPC -> X128MC.SPC
[sigmove 06:55:14 DEBUG] transformed X128Md.SPC -> X128MD.SPC
[sigmove 06:55:14 DEBUG] transformed X128Me.SPC -> X128ME.SPC
[sigmove 06:55:14 DEBUG] transformed X128Mf.SPC -> X128MF.SPC
[Status 06:55:14 INFO] data for X128 transferred to science data processing
[Tidy 06:55:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:55:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:55:14 INFO] resetting WatchDogTimer
[Status 06:55:14 INFO] Starting Set [AERI set: name Y128, 6 scans, 0 angle, D16300 command]
[Ingest 06:55:14 INFO] Sending XML status message
[Status 06:55:14 INFO] Mirror angle: 0
[Mirror 06:55:14 INFO] rotating to position Y
[Status 06:55:14 INFO] .SET file for ACQ96 ready
[Ingest 06:55:15 INFO] Starting acquisition
[Status 06:55:15 INFO] reading housekeeping
[Status 06:55:32 INFO] acquire complete
[Status 06:55:33 INFO] writing housekeeping
[Sequencer 06:55:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:55:33 INFO] incremented Y scene to 128 completed views
[Sequencer 06:55:33 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:55:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:55:33 INFO] incremented to [AERI set: name Z128, 6 scans, 0 angle, D16300 command] set
[sigmove 06:55:33 INFO] Y128.SIG(18)
[sigmove 06:55:33 DEBUG] transformed Y128Ma.SPC -> Y128MA.SPC
[sigmove 06:55:33 DEBUG] transformed Y128Mb.SPC -> Y128MB.SPC
[sigmove 06:55:33 DEBUG] transformed Y128Mc.SPC -> Y128MC.SPC
[sigmove 06:55:33 DEBUG] transformed Y128Md.SPC -> Y128MD.SPC
[sigmove 06:55:33 DEBUG] transformed Y128Me.SPC -> Y128ME.SPC
[sigmove 06:55:33 DEBUG] transformed Y128Mf.SPC -> Y128MF.SPC
[Status 06:55:33 INFO] data for Y128 transferred to science data processing
[Tidy 06:55:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:55:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:55:33 INFO] resetting WatchDogTimer
[Status 06:55:33 INFO] Starting Set [AERI set: name Z128, 6 scans, 0 angle, D16300 command]
[Ingest 06:55:33 INFO] Sending XML status message
[Status 06:55:33 INFO] Mirror angle: 0
[Mirror 06:55:33 INFO] rotating to position Z
[Status 06:55:33 INFO] .SET file for ACQ96 ready
[Ingest 06:55:34 INFO] Starting acquisition
[Status 06:55:34 INFO] reading housekeeping
[Status 06:55:51 INFO] acquire complete
[Status 06:55:52 INFO] writing housekeeping
[Sequencer 06:55:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:55:52 INFO] incremented Z scene to 128 completed views
[Sequencer 06:55:52 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:55:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:55:52 INFO] incremented to [AERI set: name H129, 6 scans, 60 angle, D22500 command] set
[sigmove 06:55:52 INFO] Z128.SIG(18)
[sigmove 06:55:52 DEBUG] transformed Z128Ma.SPC -> Z128MA.SPC
[sigmove 06:55:52 DEBUG] transformed Z128Mb.SPC -> Z128MB.SPC
[sigmove 06:55:52 DEBUG] transformed Z128Mc.SPC -> Z128MC.SPC
[sigmove 06:55:52 DEBUG] transformed Z128Md.SPC -> Z128MD.SPC
[sigmove 06:55:52 DEBUG] transformed Z128Me.SPC -> Z128ME.SPC
[sigmove 06:55:52 DEBUG] transformed Z128Mf.SPC -> Z128MF.SPC
[Status 06:55:52 INFO] data for Z128 transferred to science data processing
[Tidy 06:55:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:55:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:55:52 INFO] resetting WatchDogTimer
[Status 06:55:52 INFO] Starting Set [AERI set: name H129, 6 scans, 60 angle, D22500 command]
[Ingest 06:55:52 INFO] Sending XML status message
[Status 06:55:52 INFO] Mirror angle: 60
[Mirror 06:55:52 INFO] rotating to position H
[Status 06:55:53 INFO] .SET file for ACQ96 ready
[Ingest 06:55:53 INFO] Starting acquisition
[Status 06:55:53 INFO] reading housekeeping
[Status 06:56:12 INFO] acquire complete
[Status 06:56:12 INFO] writing housekeeping
[Sequencer 06:56:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:56:12 INFO] incremented H scene to 129 completed views
[Sequencer 06:56:12 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:56:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:56:12 INFO] incremented to [AERI set: name A129, 6 scans, 120 angle, D28300 command] set
[sigmove 06:56:12 INFO] H129.SIG(18)
[sigmove 06:56:12 DEBUG] transformed H129Ma.SPC -> H129MA.SPC
[sigmove 06:56:12 DEBUG] transformed H129Mb.SPC -> H129MB.SPC
[sigmove 06:56:12 DEBUG] transformed H129Mc.SPC -> H129MC.SPC
[sigmove 06:56:12 DEBUG] transformed H129Md.SPC -> H129MD.SPC
[sigmove 06:56:12 DEBUG] transformed H129Me.SPC -> H129ME.SPC
[sigmove 06:56:12 DEBUG] transformed H129Mf.SPC -> H129MF.SPC
[Status 06:56:12 INFO] data for H129 transferred to science data processing
[Tidy 06:56:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:56:12 INFO] A127.FIN(19),H127.FIN(19),S127.FIN(19),T127.FIN(19),U127.FIN(19),V127.FIN(19),W127.FIN(19),X127.FIN(19),Y127.FIN(19),Z127.FIN(19),A128.FIN(19),H128.FIN(19),S128.FIN(19),T128.FIN(19),U128.FIN(19),V128.FIN(19),W128.FIN(19),X128.FIN(19),Y128.FIN(19),Z128.FIN(19)
[sigmove 06:56:12 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:56:12 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 06:56:15 DEBUG] done zipping
[WatchDog 06:56:15 INFO] resetting WatchDogTimer
[Status 06:56:15 INFO] Starting Set [AERI set: name A129, 6 scans, 120 angle, D28300 command]
[Ingest 06:56:15 INFO] Sending XML status message
[Status 06:56:15 INFO] Mirror angle: 120
[Mirror 06:56:15 INFO] rotating to position A
[Status 06:56:16 INFO] .SET file for ACQ96 ready
[Ingest 06:56:16 INFO] Starting acquisition
[Status 06:56:16 INFO] reading housekeeping
[Status 06:56:34 INFO] acquire complete
[Status 06:56:35 INFO] writing housekeeping
[Sequencer 06:56:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:56:35 INFO] incremented A scene to 129 completed views
[Sequencer 06:56:35 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:56:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:56:35 INFO] incremented to [AERI set: name S129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:56:35 INFO] A129.SIG(18)
[sigmove 06:56:35 DEBUG] transformed A129Ma.SPC -> A129MA.SPC
[sigmove 06:56:35 DEBUG] transformed A129Mb.SPC -> A129MB.SPC
[sigmove 06:56:35 DEBUG] transformed A129Mc.SPC -> A129MC.SPC
[sigmove 06:56:35 DEBUG] transformed A129Md.SPC -> A129MD.SPC
[sigmove 06:56:35 DEBUG] transformed A129Me.SPC -> A129ME.SPC
[sigmove 06:56:35 DEBUG] transformed A129Mf.SPC -> A129MF.SPC
[Status 06:56:35 INFO] data for A129 transferred to science data processing
[Tidy 06:56:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:56:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:56:35 INFO] resetting WatchDogTimer
[Status 06:56:35 INFO] Starting Set [AERI set: name S129, 6 scans, 0 angle, D16300 command]
[Ingest 06:56:35 INFO] Sending XML status message
[Status 06:56:35 INFO] Mirror angle: 0
[Mirror 06:56:35 INFO] rotating to position S
[Status 06:56:36 INFO] .SET file for ACQ96 ready
[Ingest 06:56:36 INFO] Starting acquisition
[Status 06:56:37 INFO] reading housekeeping
[Status 06:56:54 INFO] acquire complete
[Status 06:56:55 INFO] writing housekeeping
[Sequencer 06:56:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:56:55 INFO] incremented S scene to 129 completed views
[Sequencer 06:56:55 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:56:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:56:55 INFO] incremented to [AERI set: name T129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:56:55 INFO] S129.SIG(18)
[sigmove 06:56:55 DEBUG] transformed S129Ma.SPC -> S129MA.SPC
[sigmove 06:56:55 DEBUG] transformed S129Mb.SPC -> S129MB.SPC
[sigmove 06:56:55 DEBUG] transformed S129Mc.SPC -> S129MC.SPC
[sigmove 06:56:55 DEBUG] transformed S129Md.SPC -> S129MD.SPC
[sigmove 06:56:55 DEBUG] transformed S129Me.SPC -> S129ME.SPC
[sigmove 06:56:55 DEBUG] transformed S129Mf.SPC -> S129MF.SPC
[Status 06:56:55 INFO] data for S129 transferred to science data processing
[Tidy 06:56:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:56:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:56:55 INFO] resetting WatchDogTimer
[Status 06:56:55 INFO] Starting Set [AERI set: name T129, 6 scans, 0 angle, D16300 command]
[Ingest 06:56:55 INFO] Sending XML status message
[Status 06:56:55 INFO] Mirror angle: 0
[Mirror 06:56:55 INFO] rotating to position T
[Status 06:56:55 INFO] .SET file for ACQ96 ready
[Ingest 06:56:56 INFO] Starting acquisition
[Status 06:56:56 INFO] reading housekeeping
[Status 06:57:18 INFO] acquire complete
[Status 06:57:18 INFO] writing housekeeping
[Sequencer 06:57:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:57:18 INFO] incremented T scene to 129 completed views
[Sequencer 06:57:18 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:57:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:57:18 INFO] incremented to [AERI set: name U129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:57:18 INFO] T129.SIG(18)
[sigmove 06:57:18 DEBUG] transformed T129Ma.SPC -> T129MA.SPC
[sigmove 06:57:18 DEBUG] transformed T129Mb.SPC -> T129MB.SPC
[sigmove 06:57:18 DEBUG] transformed T129Mc.SPC -> T129MC.SPC
[sigmove 06:57:18 DEBUG] transformed T129Md.SPC -> T129MD.SPC
[sigmove 06:57:18 DEBUG] transformed T129Me.SPC -> T129ME.SPC
[sigmove 06:57:18 DEBUG] transformed T129Mf.SPC -> T129MF.SPC
[Status 06:57:18 INFO] data for T129 transferred to science data processing
[Tidy 06:57:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:57:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:57:18 INFO] resetting WatchDogTimer
[Status 06:57:19 INFO] Starting Set [AERI set: name U129, 6 scans, 0 angle, D16300 command]
[Ingest 06:57:19 INFO] Sending XML status message
[Status 06:57:19 INFO] Mirror angle: 0
[Mirror 06:57:19 INFO] rotating to position U
[Status 06:57:19 INFO] .SET file for ACQ96 ready
[Ingest 06:57:19 INFO] Starting acquisition
[Status 06:57:19 INFO] reading housekeeping
[Status 06:57:37 INFO] acquire complete
[Status 06:57:37 INFO] writing housekeeping
[Sequencer 06:57:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:57:37 INFO] incremented U scene to 129 completed views
[Sequencer 06:57:37 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:57:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:57:37 INFO] incremented to [AERI set: name V129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:57:37 INFO] U129.SIG(18)
[sigmove 06:57:37 DEBUG] transformed U129Ma.SPC -> U129MA.SPC
[sigmove 06:57:37 DEBUG] transformed U129Mb.SPC -> U129MB.SPC
[sigmove 06:57:37 DEBUG] transformed U129Mc.SPC -> U129MC.SPC
[sigmove 06:57:37 DEBUG] transformed U129Md.SPC -> U129MD.SPC
[sigmove 06:57:37 DEBUG] transformed U129Me.SPC -> U129ME.SPC
[sigmove 06:57:37 DEBUG] transformed U129Mf.SPC -> U129MF.SPC
[Status 06:57:37 INFO] data for U129 transferred to science data processing
[Tidy 06:57:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:57:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:57:37 INFO] resetting WatchDogTimer
[Status 06:57:38 INFO] Starting Set [AERI set: name V129, 6 scans, 0 angle, D16300 command]
[Ingest 06:57:38 INFO] Sending XML status message
[Status 06:57:38 INFO] Mirror angle: 0
[Mirror 06:57:38 INFO] rotating to position V
[Status 06:57:38 INFO] .SET file for ACQ96 ready
[Ingest 06:57:38 INFO] Starting acquisition
[Status 06:57:38 INFO] reading housekeeping
[Status 06:57:56 INFO] acquire complete
[Status 06:57:56 INFO] writing housekeeping
[Sequencer 06:57:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:57:57 INFO] incremented V scene to 129 completed views
[Sequencer 06:57:57 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:57:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:57:57 INFO] incremented to [AERI set: name W129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:57:57 INFO] V129.SIG(18)
[sigmove 06:57:57 DEBUG] transformed V129Ma.SPC -> V129MA.SPC
[sigmove 06:57:57 DEBUG] transformed V129Mb.SPC -> V129MB.SPC
[sigmove 06:57:57 DEBUG] transformed V129Mc.SPC -> V129MC.SPC
[sigmove 06:57:57 DEBUG] transformed V129Md.SPC -> V129MD.SPC
[sigmove 06:57:57 DEBUG] transformed V129Me.SPC -> V129ME.SPC
[sigmove 06:57:57 DEBUG] transformed V129Mf.SPC -> V129MF.SPC
[Status 06:57:57 INFO] data for V129 transferred to science data processing
[Tidy 06:57:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:57:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:57:57 INFO] resetting WatchDogTimer
[Status 06:57:57 INFO] Starting Set [AERI set: name W129, 6 scans, 0 angle, D16300 command]
[Ingest 06:57:57 INFO] Sending XML status message
[Status 06:57:57 INFO] Mirror angle: 0
[Mirror 06:57:57 INFO] rotating to position W
[Status 06:57:57 INFO] .SET file for ACQ96 ready
[Ingest 06:57:57 INFO] Starting acquisition
[Status 06:57:58 INFO] reading housekeeping
[Status 06:58:15 INFO] acquire complete
[Status 06:58:16 INFO] writing housekeeping
[Sequencer 06:58:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:58:16 INFO] incremented W scene to 129 completed views
[Sequencer 06:58:16 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:58:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:58:16 INFO] incremented to [AERI set: name X129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:58:16 INFO] W129.SIG(18)
[sigmove 06:58:16 DEBUG] transformed W129Ma.SPC -> W129MA.SPC
[sigmove 06:58:16 DEBUG] transformed W129Mb.SPC -> W129MB.SPC
[sigmove 06:58:16 DEBUG] transformed W129Mc.SPC -> W129MC.SPC
[sigmove 06:58:16 DEBUG] transformed W129Md.SPC -> W129MD.SPC
[sigmove 06:58:16 DEBUG] transformed W129Me.SPC -> W129ME.SPC
[sigmove 06:58:16 DEBUG] transformed W129Mf.SPC -> W129MF.SPC
[Status 06:58:16 INFO] data for W129 transferred to science data processing
[Tidy 06:58:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:58:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:58:16 INFO] resetting WatchDogTimer
[Status 06:58:16 INFO] Starting Set [AERI set: name X129, 6 scans, 0 angle, D16300 command]
[Ingest 06:58:16 INFO] Sending XML status message
[Status 06:58:16 INFO] Mirror angle: 0
[Mirror 06:58:16 INFO] rotating to position X
[Status 06:58:16 INFO] .SET file for ACQ96 ready
[Ingest 06:58:16 INFO] Starting acquisition
[Status 06:58:17 INFO] reading housekeeping
[Status 06:58:34 INFO] acquire complete
[Status 06:58:35 INFO] writing housekeeping
[Sequencer 06:58:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:58:35 INFO] incremented X scene to 129 completed views
[Sequencer 06:58:35 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:58:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:58:35 INFO] incremented to [AERI set: name Y129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:58:35 INFO] X129.SIG(18)
[sigmove 06:58:35 DEBUG] transformed X129Ma.SPC -> X129MA.SPC
[sigmove 06:58:35 DEBUG] transformed X129Mb.SPC -> X129MB.SPC
[sigmove 06:58:35 DEBUG] transformed X129Mc.SPC -> X129MC.SPC
[sigmove 06:58:35 DEBUG] transformed X129Md.SPC -> X129MD.SPC
[sigmove 06:58:35 DEBUG] transformed X129Me.SPC -> X129ME.SPC
[sigmove 06:58:35 DEBUG] transformed X129Mf.SPC -> X129MF.SPC
[Status 06:58:35 INFO] data for X129 transferred to science data processing
[Tidy 06:58:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:58:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:58:35 INFO] resetting WatchDogTimer
[Status 06:58:35 INFO] Starting Set [AERI set: name Y129, 6 scans, 0 angle, D16300 command]
[Ingest 06:58:35 INFO] Sending XML status message
[Status 06:58:35 INFO] Mirror angle: 0
[Mirror 06:58:35 INFO] rotating to position Y
[Status 06:58:35 INFO] .SET file for ACQ96 ready
[Ingest 06:58:36 INFO] Starting acquisition
[Status 06:58:36 INFO] reading housekeeping
[Status 06:58:53 INFO] acquire complete
[Status 06:58:54 INFO] writing housekeeping
[Sequencer 06:58:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:58:54 INFO] incremented Y scene to 129 completed views
[Sequencer 06:58:54 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 06:58:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:58:54 INFO] incremented to [AERI set: name Z129, 6 scans, 0 angle, D16300 command] set
[sigmove 06:58:54 INFO] Y129.SIG(18)
[sigmove 06:58:54 DEBUG] transformed Y129Ma.SPC -> Y129MA.SPC
[sigmove 06:58:54 DEBUG] transformed Y129Mb.SPC -> Y129MB.SPC
[sigmove 06:58:54 DEBUG] transformed Y129Mc.SPC -> Y129MC.SPC
[sigmove 06:58:54 DEBUG] transformed Y129Md.SPC -> Y129MD.SPC
[sigmove 06:58:54 DEBUG] transformed Y129Me.SPC -> Y129ME.SPC
[sigmove 06:58:54 DEBUG] transformed Y129Mf.SPC -> Y129MF.SPC
[Status 06:58:54 INFO] data for Y129 transferred to science data processing
[Tidy 06:58:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:58:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:58:54 INFO] resetting WatchDogTimer
[Status 06:58:54 INFO] Starting Set [AERI set: name Z129, 6 scans, 0 angle, D16300 command]
[Ingest 06:58:54 INFO] Sending XML status message
[Status 06:58:54 INFO] Mirror angle: 0
[Mirror 06:58:54 INFO] rotating to position Z
[Status 06:58:54 INFO] .SET file for ACQ96 ready
[Ingest 06:58:55 INFO] Starting acquisition
[Status 06:58:55 INFO] reading housekeeping
[Status 06:59:12 INFO] acquire complete
[Status 06:59:13 INFO] writing housekeeping
[Sequencer 06:59:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:59:13 INFO] incremented Z scene to 129 completed views
[Sequencer 06:59:13 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 06:59:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:59:13 INFO] incremented to [AERI set: name A130, 6 scans, 120 angle, D28300 command] set
[sigmove 06:59:13 INFO] Z129.SIG(18)
[sigmove 06:59:13 DEBUG] transformed Z129Ma.SPC -> Z129MA.SPC
[sigmove 06:59:13 DEBUG] transformed Z129Mb.SPC -> Z129MB.SPC
[sigmove 06:59:13 DEBUG] transformed Z129Mc.SPC -> Z129MC.SPC
[sigmove 06:59:13 DEBUG] transformed Z129Md.SPC -> Z129MD.SPC
[sigmove 06:59:13 DEBUG] transformed Z129Me.SPC -> Z129ME.SPC
[sigmove 06:59:13 DEBUG] transformed Z129Mf.SPC -> Z129MF.SPC
[Status 06:59:13 INFO] data for Z129 transferred to science data processing
[Tidy 06:59:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:59:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:59:13 INFO] resetting WatchDogTimer
[Status 06:59:13 INFO] Starting Set [AERI set: name A130, 6 scans, 120 angle, D28300 command]
[Ingest 06:59:13 INFO] Sending XML status message
[Status 06:59:13 INFO] Mirror angle: 120
[Mirror 06:59:13 INFO] rotating to position A
[Status 06:59:15 INFO] .SET file for ACQ96 ready
[Ingest 06:59:15 INFO] Starting acquisition
[Status 06:59:15 INFO] reading housekeeping
[Status 06:59:32 INFO] acquire complete
[Status 06:59:33 INFO] writing housekeeping
[Sequencer 06:59:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:59:33 INFO] incremented A scene to 130 completed views
[Sequencer 06:59:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 06:59:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:59:33 INFO] incremented to [AERI set: name H130, 6 scans, 60 angle, D22500 command] set
[sigmove 06:59:33 INFO] A130.SIG(18)
[sigmove 06:59:33 DEBUG] transformed A130Ma.SPC -> A130MA.SPC
[sigmove 06:59:33 DEBUG] transformed A130Mb.SPC -> A130MB.SPC
[sigmove 06:59:33 DEBUG] transformed A130Mc.SPC -> A130MC.SPC
[sigmove 06:59:33 DEBUG] transformed A130Md.SPC -> A130MD.SPC
[sigmove 06:59:33 DEBUG] transformed A130Me.SPC -> A130ME.SPC
[sigmove 06:59:33 DEBUG] transformed A130Mf.SPC -> A130MF.SPC
[Status 06:59:33 INFO] data for A130 transferred to science data processing
[Tidy 06:59:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:59:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:59:33 INFO] resetting WatchDogTimer
[Status 06:59:33 INFO] Starting Set [AERI set: name H130, 6 scans, 60 angle, D22500 command]
[Ingest 06:59:33 INFO] Sending XML status message
[Status 06:59:33 INFO] Mirror angle: 60
[Mirror 06:59:33 INFO] rotating to position H
[Status 06:59:34 INFO] .SET file for ACQ96 ready
[Ingest 06:59:34 INFO] Starting acquisition
[Status 06:59:35 INFO] reading housekeeping
[Status 06:59:53 INFO] acquire complete
[Status 06:59:53 INFO] writing housekeeping
[Sequencer 06:59:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 06:59:53 INFO] incremented H scene to 130 completed views
[Sequencer 06:59:53 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 06:59:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 06:59:53 INFO] incremented to [AERI set: name S130, 6 scans, 0 angle, D16300 command] set
[sigmove 06:59:53 INFO] H130.SIG(18)
[sigmove 06:59:53 DEBUG] transformed H130Ma.SPC -> H130MA.SPC
[sigmove 06:59:53 DEBUG] transformed H130Mb.SPC -> H130MB.SPC
[sigmove 06:59:53 DEBUG] transformed H130Mc.SPC -> H130MC.SPC
[sigmove 06:59:53 DEBUG] transformed H130Md.SPC -> H130MD.SPC
[sigmove 06:59:53 DEBUG] transformed H130Me.SPC -> H130ME.SPC
[sigmove 06:59:53 DEBUG] transformed H130Mf.SPC -> H130MF.SPC
[Status 06:59:53 INFO] data for H130 transferred to science data processing
[Tidy 06:59:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 06:59:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 06:59:53 INFO] resetting WatchDogTimer
[Status 06:59:53 INFO] Starting Set [AERI set: name S130, 6 scans, 0 angle, D16300 command]
[Ingest 06:59:53 INFO] Sending XML status message
[Status 06:59:53 INFO] Mirror angle: 0
[Mirror 06:59:54 INFO] rotating to position S
[Status 06:59:54 INFO] .SET file for ACQ96 ready
[Ingest 06:59:55 INFO] Starting acquisition
[Status 06:59:55 INFO] reading housekeeping
[Status 07:00:13 INFO] acquire complete
[Status 07:00:13 INFO] writing housekeeping
[Sequencer 07:00:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:00:13 INFO] incremented S scene to 130 completed views
[Sequencer 07:00:13 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:00:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:00:13 INFO] incremented to [AERI set: name T130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:00:13 INFO] S130.SIG(18)
[sigmove 07:00:13 DEBUG] transformed S130Ma.SPC -> S130MA.SPC
[sigmove 07:00:13 DEBUG] transformed S130Mb.SPC -> S130MB.SPC
[sigmove 07:00:13 DEBUG] transformed S130Mc.SPC -> S130MC.SPC
[sigmove 07:00:13 DEBUG] transformed S130Md.SPC -> S130MD.SPC
[sigmove 07:00:13 DEBUG] transformed S130Me.SPC -> S130ME.SPC
[sigmove 07:00:13 DEBUG] transformed S130Mf.SPC -> S130MF.SPC
[Status 07:00:13 INFO] data for S130 transferred to science data processing
[Tidy 07:00:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:00:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:00:13 INFO] resetting WatchDogTimer
[Status 07:00:14 INFO] Starting Set [AERI set: name T130, 6 scans, 0 angle, D16300 command]
[Ingest 07:00:14 INFO] Sending XML status message
[Status 07:00:14 INFO] Mirror angle: 0
[Mirror 07:00:14 INFO] rotating to position T
[Status 07:00:14 INFO] .SET file for ACQ96 ready
[Ingest 07:00:14 INFO] Starting acquisition
[Status 07:00:14 INFO] reading housekeeping
[Status 07:00:32 INFO] acquire complete
[Status 07:00:32 INFO] writing housekeeping
[Sequencer 07:00:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:00:32 INFO] incremented T scene to 130 completed views
[Sequencer 07:00:32 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:00:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:00:32 INFO] incremented to [AERI set: name U130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:00:32 INFO] T130.SIG(18)
[sigmove 07:00:32 DEBUG] transformed T130Ma.SPC -> T130MA.SPC
[sigmove 07:00:32 DEBUG] transformed T130Mb.SPC -> T130MB.SPC
[sigmove 07:00:32 DEBUG] transformed T130Mc.SPC -> T130MC.SPC
[sigmove 07:00:32 DEBUG] transformed T130Md.SPC -> T130MD.SPC
[sigmove 07:00:32 DEBUG] transformed T130Me.SPC -> T130ME.SPC
[sigmove 07:00:32 DEBUG] transformed T130Mf.SPC -> T130MF.SPC
[Status 07:00:32 INFO] data for T130 transferred to science data processing
[Tidy 07:00:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:00:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:00:33 INFO] resetting WatchDogTimer
[Status 07:00:33 INFO] Starting Set [AERI set: name U130, 6 scans, 0 angle, D16300 command]
[Ingest 07:00:33 INFO] Sending XML status message
[Status 07:00:33 INFO] Mirror angle: 0
[Mirror 07:00:33 INFO] rotating to position U
[Status 07:00:33 INFO] .SET file for ACQ96 ready
[Ingest 07:00:33 INFO] Starting acquisition
[Status 07:00:33 INFO] reading housekeeping
[Status 07:00:51 INFO] acquire complete
[Status 07:00:52 INFO] writing housekeeping
[Sequencer 07:00:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:00:52 INFO] incremented U scene to 130 completed views
[Sequencer 07:00:52 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:00:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:00:52 INFO] incremented to [AERI set: name V130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:00:52 INFO] U130.SIG(18)
[sigmove 07:00:52 DEBUG] transformed U130Ma.SPC -> U130MA.SPC
[sigmove 07:00:52 DEBUG] transformed U130Mb.SPC -> U130MB.SPC
[sigmove 07:00:52 DEBUG] transformed U130Mc.SPC -> U130MC.SPC
[sigmove 07:00:52 DEBUG] transformed U130Md.SPC -> U130MD.SPC
[sigmove 07:00:52 DEBUG] transformed U130Me.SPC -> U130ME.SPC
[sigmove 07:00:52 DEBUG] transformed U130Mf.SPC -> U130MF.SPC
[Status 07:00:52 INFO] data for U130 transferred to science data processing
[Tidy 07:00:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:00:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:00:52 INFO] resetting WatchDogTimer
[Status 07:00:52 INFO] Starting Set [AERI set: name V130, 6 scans, 0 angle, D16300 command]
[Ingest 07:00:52 INFO] Sending XML status message
[Status 07:00:52 INFO] Mirror angle: 0
[Mirror 07:00:52 INFO] rotating to position V
[Status 07:00:52 INFO] .SET file for ACQ96 ready
[Ingest 07:00:52 INFO] Starting acquisition
[Status 07:00:53 INFO] reading housekeeping
[Status 07:01:10 INFO] acquire complete
[Status 07:01:11 INFO] writing housekeeping
[Sequencer 07:01:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:01:11 INFO] incremented V scene to 130 completed views
[Sequencer 07:01:11 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:01:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:01:11 INFO] incremented to [AERI set: name W130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:01:11 INFO] V130.SIG(18)
[sigmove 07:01:11 DEBUG] transformed V130Ma.SPC -> V130MA.SPC
[sigmove 07:01:11 DEBUG] transformed V130Mb.SPC -> V130MB.SPC
[sigmove 07:01:11 DEBUG] transformed V130Mc.SPC -> V130MC.SPC
[sigmove 07:01:11 DEBUG] transformed V130Md.SPC -> V130MD.SPC
[sigmove 07:01:11 DEBUG] transformed V130Me.SPC -> V130ME.SPC
[sigmove 07:01:11 DEBUG] transformed V130Mf.SPC -> V130MF.SPC
[Status 07:01:11 INFO] data for V130 transferred to science data processing
[Tidy 07:01:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:01:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:01:11 INFO] resetting WatchDogTimer
[Status 07:01:11 INFO] Starting Set [AERI set: name W130, 6 scans, 0 angle, D16300 command]
[Ingest 07:01:11 INFO] Sending XML status message
[Status 07:01:11 INFO] Mirror angle: 0
[Mirror 07:01:11 INFO] rotating to position W
[Status 07:01:11 INFO] .SET file for ACQ96 ready
[Ingest 07:01:12 INFO] Starting acquisition
[Status 07:01:12 INFO] reading housekeeping
[Status 07:01:29 INFO] acquire complete
[Status 07:01:30 INFO] writing housekeeping
[Sequencer 07:01:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:01:30 INFO] incremented W scene to 130 completed views
[Sequencer 07:01:30 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:01:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:01:30 INFO] incremented to [AERI set: name X130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:01:30 INFO] W130.SIG(18)
[sigmove 07:01:30 DEBUG] transformed W130Ma.SPC -> W130MA.SPC
[sigmove 07:01:30 DEBUG] transformed W130Mb.SPC -> W130MB.SPC
[sigmove 07:01:30 DEBUG] transformed W130Mc.SPC -> W130MC.SPC
[sigmove 07:01:30 DEBUG] transformed W130Md.SPC -> W130MD.SPC
[sigmove 07:01:30 DEBUG] transformed W130Me.SPC -> W130ME.SPC
[sigmove 07:01:30 DEBUG] transformed W130Mf.SPC -> W130MF.SPC
[Status 07:01:30 INFO] data for W130 transferred to science data processing
[Tidy 07:01:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:01:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:01:30 INFO] resetting WatchDogTimer
[Status 07:01:30 INFO] Starting Set [AERI set: name X130, 6 scans, 0 angle, D16300 command]
[Ingest 07:01:30 INFO] Sending XML status message
[Status 07:01:30 INFO] Mirror angle: 0
[Mirror 07:01:30 INFO] rotating to position X
[Status 07:01:30 INFO] .SET file for ACQ96 ready
[Ingest 07:01:31 INFO] Starting acquisition
[Status 07:01:31 INFO] reading housekeeping
[Status 07:01:48 INFO] acquire complete
[Status 07:01:49 INFO] writing housekeeping
[Sequencer 07:01:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:01:49 INFO] incremented X scene to 130 completed views
[Sequencer 07:01:49 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:01:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:01:49 INFO] incremented to [AERI set: name Y130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:01:49 INFO] X130.SIG(18)
[sigmove 07:01:49 DEBUG] transformed X130Ma.SPC -> X130MA.SPC
[sigmove 07:01:49 DEBUG] transformed X130Mb.SPC -> X130MB.SPC
[sigmove 07:01:49 DEBUG] transformed X130Mc.SPC -> X130MC.SPC
[sigmove 07:01:49 DEBUG] transformed X130Md.SPC -> X130MD.SPC
[sigmove 07:01:49 DEBUG] transformed X130Me.SPC -> X130ME.SPC
[sigmove 07:01:49 DEBUG] transformed X130Mf.SPC -> X130MF.SPC
[Status 07:01:49 INFO] data for X130 transferred to science data processing
[Tidy 07:01:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:01:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:01:49 INFO] resetting WatchDogTimer
[Status 07:01:49 INFO] Starting Set [AERI set: name Y130, 6 scans, 0 angle, D16300 command]
[Ingest 07:01:49 INFO] Sending XML status message
[Status 07:01:49 INFO] Mirror angle: 0
[Mirror 07:01:49 INFO] rotating to position Y
[Status 07:01:49 INFO] .SET file for ACQ96 ready
[Ingest 07:01:50 INFO] Starting acquisition
[Status 07:01:50 INFO] reading housekeeping
[Status 07:02:07 INFO] acquire complete
[Status 07:02:08 INFO] writing housekeeping
[Sequencer 07:02:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:02:08 INFO] incremented Y scene to 130 completed views
[Sequencer 07:02:08 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:02:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:02:08 INFO] incremented to [AERI set: name Z130, 6 scans, 0 angle, D16300 command] set
[sigmove 07:02:08 INFO] Y130.SIG(18)
[sigmove 07:02:08 DEBUG] transformed Y130Ma.SPC -> Y130MA.SPC
[sigmove 07:02:08 DEBUG] transformed Y130Mb.SPC -> Y130MB.SPC
[sigmove 07:02:08 DEBUG] transformed Y130Mc.SPC -> Y130MC.SPC
[sigmove 07:02:08 DEBUG] transformed Y130Md.SPC -> Y130MD.SPC
[sigmove 07:02:08 DEBUG] transformed Y130Me.SPC -> Y130ME.SPC
[sigmove 07:02:08 DEBUG] transformed Y130Mf.SPC -> Y130MF.SPC
[Status 07:02:08 INFO] data for Y130 transferred to science data processing
[Tidy 07:02:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:02:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:02:08 INFO] resetting WatchDogTimer
[Status 07:02:08 INFO] Starting Set [AERI set: name Z130, 6 scans, 0 angle, D16300 command]
[Ingest 07:02:08 INFO] Sending XML status message
[Status 07:02:08 INFO] Mirror angle: 0
[Mirror 07:02:08 INFO] rotating to position Z
[Status 07:02:09 INFO] .SET file for ACQ96 ready
[Ingest 07:02:09 INFO] Starting acquisition
[Status 07:02:09 INFO] reading housekeeping
[Status 07:02:26 INFO] acquire complete
[Status 07:02:27 INFO] writing housekeeping
[Sequencer 07:02:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:02:27 INFO] incremented Z scene to 130 completed views
[Sequencer 07:02:27 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:02:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:02:27 INFO] incremented to [AERI set: name H131, 6 scans, 60 angle, D22500 command] set
[sigmove 07:02:27 INFO] Z130.SIG(18)
[sigmove 07:02:27 DEBUG] transformed Z130Ma.SPC -> Z130MA.SPC
[sigmove 07:02:27 DEBUG] transformed Z130Mb.SPC -> Z130MB.SPC
[sigmove 07:02:27 DEBUG] transformed Z130Mc.SPC -> Z130MC.SPC
[sigmove 07:02:27 DEBUG] transformed Z130Md.SPC -> Z130MD.SPC
[sigmove 07:02:27 DEBUG] transformed Z130Me.SPC -> Z130ME.SPC
[sigmove 07:02:27 DEBUG] transformed Z130Mf.SPC -> Z130MF.SPC
[Status 07:02:27 INFO] data for Z130 transferred to science data processing
[Tidy 07:02:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:02:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:02:27 INFO] resetting WatchDogTimer
[Status 07:02:27 INFO] Starting Set [AERI set: name H131, 6 scans, 60 angle, D22500 command]
[Ingest 07:02:27 INFO] Sending XML status message
[Status 07:02:27 INFO] Mirror angle: 60
[Mirror 07:02:27 INFO] rotating to position H
[Status 07:02:28 INFO] .SET file for ACQ96 ready
[Ingest 07:02:28 INFO] Starting acquisition
[Status 07:02:29 INFO] reading housekeeping
[Status 07:02:47 INFO] acquire complete
[Status 07:02:47 INFO] writing housekeeping
[Sequencer 07:02:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:02:47 INFO] incremented H scene to 131 completed views
[Sequencer 07:02:47 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:02:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:02:47 INFO] incremented to [AERI set: name A131, 6 scans, 120 angle, D28300 command] set
[sigmove 07:02:47 INFO] H131.SIG(18)
[sigmove 07:02:47 DEBUG] transformed H131Ma.SPC -> H131MA.SPC
[sigmove 07:02:47 DEBUG] transformed H131Mb.SPC -> H131MB.SPC
[sigmove 07:02:47 DEBUG] transformed H131Mc.SPC -> H131MC.SPC
[sigmove 07:02:47 DEBUG] transformed H131Md.SPC -> H131MD.SPC
[sigmove 07:02:47 DEBUG] transformed H131Me.SPC -> H131ME.SPC
[sigmove 07:02:47 DEBUG] transformed H131Mf.SPC -> H131MF.SPC
[Status 07:02:47 INFO] data for H131 transferred to science data processing
[Tidy 07:02:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:02:47 INFO] A129.FIN(19),H129.FIN(19),S129.FIN(19),T129.FIN(19),U129.FIN(19),V129.FIN(19),W129.FIN(19),X129.FIN(19),Y129.FIN(19),Z129.FIN(19),A130.FIN(19),H130.FIN(19),S130.FIN(19),T130.FIN(19),U130.FIN(19),V130.FIN(19),W130.FIN(19),X130.FIN(19),Y130.FIN(19),Z130.FIN(19)
[sigmove 07:02:47 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:02:47 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:02:50 DEBUG] done zipping
[WatchDog 07:02:50 INFO] resetting WatchDogTimer
[Status 07:02:50 INFO] Starting Set [AERI set: name A131, 6 scans, 120 angle, D28300 command]
[Ingest 07:02:50 INFO] Sending XML status message
[Status 07:02:50 INFO] Mirror angle: 120
[Mirror 07:02:50 INFO] rotating to position A
[Status 07:02:51 INFO] .SET file for ACQ96 ready
[Ingest 07:02:51 INFO] Starting acquisition
[Status 07:02:51 INFO] reading housekeeping
[Status 07:03:09 INFO] acquire complete
[Status 07:03:10 INFO] writing housekeeping
[Sequencer 07:03:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:03:10 INFO] incremented A scene to 131 completed views
[Sequencer 07:03:10 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:03:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:03:10 INFO] incremented to [AERI set: name S131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:03:10 INFO] A131.SIG(18)
[sigmove 07:03:10 DEBUG] transformed A131Ma.SPC -> A131MA.SPC
[sigmove 07:03:10 DEBUG] transformed A131Mb.SPC -> A131MB.SPC
[sigmove 07:03:10 DEBUG] transformed A131Mc.SPC -> A131MC.SPC
[sigmove 07:03:10 DEBUG] transformed A131Md.SPC -> A131MD.SPC
[sigmove 07:03:10 DEBUG] transformed A131Me.SPC -> A131ME.SPC
[sigmove 07:03:10 DEBUG] transformed A131Mf.SPC -> A131MF.SPC
[Status 07:03:10 INFO] data for A131 transferred to science data processing
[Tidy 07:03:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:03:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:03:10 INFO] resetting WatchDogTimer
[Status 07:03:10 INFO] Starting Set [AERI set: name S131, 6 scans, 0 angle, D16300 command]
[Ingest 07:03:10 INFO] Sending XML status message
[Status 07:03:10 INFO] Mirror angle: 0
[Mirror 07:03:10 INFO] rotating to position S
[Status 07:03:11 INFO] .SET file for ACQ96 ready
[Ingest 07:03:11 INFO] Starting acquisition
[Status 07:03:12 INFO] reading housekeeping
[Status 07:03:29 INFO] acquire complete
[Status 07:03:30 INFO] writing housekeeping
[Sequencer 07:03:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:03:30 INFO] incremented S scene to 131 completed views
[Sequencer 07:03:30 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:03:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:03:30 INFO] incremented to [AERI set: name T131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:03:30 INFO] S131.SIG(18)
[sigmove 07:03:30 DEBUG] transformed S131Ma.SPC -> S131MA.SPC
[sigmove 07:03:30 DEBUG] transformed S131Mb.SPC -> S131MB.SPC
[sigmove 07:03:30 DEBUG] transformed S131Mc.SPC -> S131MC.SPC
[sigmove 07:03:30 DEBUG] transformed S131Md.SPC -> S131MD.SPC
[sigmove 07:03:30 DEBUG] transformed S131Me.SPC -> S131ME.SPC
[sigmove 07:03:30 DEBUG] transformed S131Mf.SPC -> S131MF.SPC
[Status 07:03:30 INFO] data for S131 transferred to science data processing
[Tidy 07:03:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:03:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:03:30 INFO] resetting WatchDogTimer
[Status 07:03:30 INFO] Starting Set [AERI set: name T131, 6 scans, 0 angle, D16300 command]
[Ingest 07:03:30 INFO] Sending XML status message
[Status 07:03:30 INFO] Mirror angle: 0
[Mirror 07:03:30 INFO] rotating to position T
[Status 07:03:30 INFO] .SET file for ACQ96 ready
[Ingest 07:03:31 INFO] Starting acquisition
[Status 07:03:31 INFO] reading housekeeping
[Status 07:03:48 INFO] acquire complete
[Status 07:03:49 INFO] writing housekeeping
[Sequencer 07:03:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:03:49 INFO] incremented T scene to 131 completed views
[Sequencer 07:03:49 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:03:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:03:49 INFO] incremented to [AERI set: name U131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:03:49 INFO] T131.SIG(18)
[sigmove 07:03:49 DEBUG] transformed T131Ma.SPC -> T131MA.SPC
[sigmove 07:03:49 DEBUG] transformed T131Mb.SPC -> T131MB.SPC
[sigmove 07:03:49 DEBUG] transformed T131Mc.SPC -> T131MC.SPC
[sigmove 07:03:49 DEBUG] transformed T131Md.SPC -> T131MD.SPC
[sigmove 07:03:49 DEBUG] transformed T131Me.SPC -> T131ME.SPC
[sigmove 07:03:49 DEBUG] transformed T131Mf.SPC -> T131MF.SPC
[Status 07:03:49 INFO] data for T131 transferred to science data processing
[Tidy 07:03:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:03:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:03:49 INFO] resetting WatchDogTimer
[Status 07:03:49 INFO] Starting Set [AERI set: name U131, 6 scans, 0 angle, D16300 command]
[Ingest 07:03:49 INFO] Sending XML status message
[Status 07:03:49 INFO] Mirror angle: 0
[Mirror 07:03:49 INFO] rotating to position U
[Status 07:03:50 INFO] .SET file for ACQ96 ready
[Ingest 07:03:50 INFO] Starting acquisition
[Status 07:03:50 INFO] reading housekeeping
[Status 07:04:07 INFO] acquire complete
[Status 07:04:08 INFO] writing housekeeping
[Sequencer 07:04:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:04:08 INFO] incremented U scene to 131 completed views
[Sequencer 07:04:08 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:04:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:04:08 INFO] incremented to [AERI set: name V131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:04:08 INFO] U131.SIG(18)
[sigmove 07:04:08 DEBUG] transformed U131Ma.SPC -> U131MA.SPC
[sigmove 07:04:08 DEBUG] transformed U131Mb.SPC -> U131MB.SPC
[sigmove 07:04:08 DEBUG] transformed U131Mc.SPC -> U131MC.SPC
[sigmove 07:04:08 DEBUG] transformed U131Md.SPC -> U131MD.SPC
[sigmove 07:04:08 DEBUG] transformed U131Me.SPC -> U131ME.SPC
[sigmove 07:04:08 DEBUG] transformed U131Mf.SPC -> U131MF.SPC
[Status 07:04:08 INFO] data for U131 transferred to science data processing
[Tidy 07:04:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:04:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:04:08 INFO] resetting WatchDogTimer
[Status 07:04:08 INFO] Starting Set [AERI set: name V131, 6 scans, 0 angle, D16300 command]
[Ingest 07:04:08 INFO] Sending XML status message
[Status 07:04:08 INFO] Mirror angle: 0
[Mirror 07:04:08 INFO] rotating to position V
[Status 07:04:09 INFO] .SET file for ACQ96 ready
[Ingest 07:04:09 INFO] Starting acquisition
[Status 07:04:09 INFO] reading housekeeping
[Status 07:04:26 INFO] acquire complete
[Status 07:04:27 INFO] writing housekeeping
[Sequencer 07:04:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:04:27 INFO] incremented V scene to 131 completed views
[Sequencer 07:04:27 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:04:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:04:27 INFO] incremented to [AERI set: name W131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:04:27 INFO] V131.SIG(18)
[sigmove 07:04:27 DEBUG] transformed V131Ma.SPC -> V131MA.SPC
[sigmove 07:04:27 DEBUG] transformed V131Mb.SPC -> V131MB.SPC
[sigmove 07:04:27 DEBUG] transformed V131Mc.SPC -> V131MC.SPC
[sigmove 07:04:27 DEBUG] transformed V131Md.SPC -> V131MD.SPC
[sigmove 07:04:27 DEBUG] transformed V131Me.SPC -> V131ME.SPC
[sigmove 07:04:27 DEBUG] transformed V131Mf.SPC -> V131MF.SPC
[Status 07:04:27 INFO] data for V131 transferred to science data processing
[Tidy 07:04:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:04:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:04:27 INFO] resetting WatchDogTimer
[Status 07:04:27 INFO] Starting Set [AERI set: name W131, 6 scans, 0 angle, D16300 command]
[Ingest 07:04:27 INFO] Sending XML status message
[Status 07:04:27 INFO] Mirror angle: 0
[Mirror 07:04:27 INFO] rotating to position W
[Status 07:04:28 INFO] .SET file for ACQ96 ready
[Ingest 07:04:28 INFO] Starting acquisition
[Status 07:04:28 INFO] reading housekeeping
[Status 07:04:46 INFO] acquire complete
[Status 07:04:46 INFO] writing housekeeping
[Sequencer 07:04:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:04:46 INFO] incremented W scene to 131 completed views
[Sequencer 07:04:46 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:04:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:04:46 INFO] incremented to [AERI set: name X131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:04:46 INFO] W131.SIG(18)
[sigmove 07:04:46 DEBUG] transformed W131Ma.SPC -> W131MA.SPC
[sigmove 07:04:46 DEBUG] transformed W131Mb.SPC -> W131MB.SPC
[sigmove 07:04:46 DEBUG] transformed W131Mc.SPC -> W131MC.SPC
[sigmove 07:04:46 DEBUG] transformed W131Md.SPC -> W131MD.SPC
[sigmove 07:04:46 DEBUG] transformed W131Me.SPC -> W131ME.SPC
[sigmove 07:04:46 DEBUG] transformed W131Mf.SPC -> W131MF.SPC
[Status 07:04:46 INFO] data for W131 transferred to science data processing
[Tidy 07:04:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:04:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:04:46 INFO] resetting WatchDogTimer
[Status 07:04:46 INFO] Starting Set [AERI set: name X131, 6 scans, 0 angle, D16300 command]
[Ingest 07:04:46 INFO] Sending XML status message
[Status 07:04:46 INFO] Mirror angle: 0
[Mirror 07:04:46 INFO] rotating to position X
[Status 07:04:47 INFO] .SET file for ACQ96 ready
[Ingest 07:04:47 INFO] Starting acquisition
[Status 07:04:47 INFO] reading housekeeping
[Status 07:05:05 INFO] acquire complete
[Status 07:05:05 INFO] writing housekeeping
[Sequencer 07:05:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:05:05 INFO] incremented X scene to 131 completed views
[Sequencer 07:05:05 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:05:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:05:05 INFO] incremented to [AERI set: name Y131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:05:05 INFO] X131.SIG(18)
[sigmove 07:05:05 DEBUG] transformed X131Ma.SPC -> X131MA.SPC
[sigmove 07:05:05 DEBUG] transformed X131Mb.SPC -> X131MB.SPC
[sigmove 07:05:05 DEBUG] transformed X131Mc.SPC -> X131MC.SPC
[sigmove 07:05:05 DEBUG] transformed X131Md.SPC -> X131MD.SPC
[sigmove 07:05:05 DEBUG] transformed X131Me.SPC -> X131ME.SPC
[sigmove 07:05:05 DEBUG] transformed X131Mf.SPC -> X131MF.SPC
[Status 07:05:05 INFO] data for X131 transferred to science data processing
[Tidy 07:05:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:05:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:05:05 INFO] resetting WatchDogTimer
[Status 07:05:05 INFO] Starting Set [AERI set: name Y131, 6 scans, 0 angle, D16300 command]
[Ingest 07:05:05 INFO] Sending XML status message
[Status 07:05:05 INFO] Mirror angle: 0
[Mirror 07:05:06 INFO] rotating to position Y
[Status 07:05:06 INFO] .SET file for ACQ96 ready
[Ingest 07:05:06 INFO] Starting acquisition
[Status 07:05:06 INFO] reading housekeeping
[Status 07:05:24 INFO] acquire complete
[Status 07:05:24 INFO] writing housekeeping
[Sequencer 07:05:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:05:24 INFO] incremented Y scene to 131 completed views
[Sequencer 07:05:24 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:05:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:05:24 INFO] incremented to [AERI set: name Z131, 6 scans, 0 angle, D16300 command] set
[sigmove 07:05:24 INFO] Y131.SIG(18)
[sigmove 07:05:24 DEBUG] transformed Y131Ma.SPC -> Y131MA.SPC
[sigmove 07:05:24 DEBUG] transformed Y131Mb.SPC -> Y131MB.SPC
[sigmove 07:05:24 DEBUG] transformed Y131Mc.SPC -> Y131MC.SPC
[sigmove 07:05:24 DEBUG] transformed Y131Md.SPC -> Y131MD.SPC
[sigmove 07:05:24 DEBUG] transformed Y131Me.SPC -> Y131ME.SPC
[sigmove 07:05:24 DEBUG] transformed Y131Mf.SPC -> Y131MF.SPC
[Status 07:05:24 INFO] data for Y131 transferred to science data processing
[Tidy 07:05:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:05:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:05:24 INFO] resetting WatchDogTimer
[Status 07:05:24 INFO] Starting Set [AERI set: name Z131, 6 scans, 0 angle, D16300 command]
[Ingest 07:05:24 INFO] Sending XML status message
[Status 07:05:24 INFO] Mirror angle: 0
[Mirror 07:05:25 INFO] rotating to position Z
[Status 07:05:25 INFO] .SET file for ACQ96 ready
[Ingest 07:05:25 INFO] Starting acquisition
[Status 07:05:25 INFO] reading housekeeping
[Status 07:05:43 INFO] acquire complete
[Status 07:05:43 INFO] writing housekeeping
[Sequencer 07:05:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:05:43 INFO] incremented Z scene to 131 completed views
[Sequencer 07:05:43 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:05:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:05:43 INFO] incremented to [AERI set: name A132, 6 scans, 120 angle, D28300 command] set
[sigmove 07:05:43 INFO] Z131.SIG(18)
[sigmove 07:05:43 DEBUG] transformed Z131Ma.SPC -> Z131MA.SPC
[sigmove 07:05:43 DEBUG] transformed Z131Mb.SPC -> Z131MB.SPC
[sigmove 07:05:43 DEBUG] transformed Z131Mc.SPC -> Z131MC.SPC
[sigmove 07:05:43 DEBUG] transformed Z131Md.SPC -> Z131MD.SPC
[sigmove 07:05:43 DEBUG] transformed Z131Me.SPC -> Z131ME.SPC
[sigmove 07:05:43 DEBUG] transformed Z131Mf.SPC -> Z131MF.SPC
[Status 07:05:43 INFO] data for Z131 transferred to science data processing
[Tidy 07:05:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:05:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:05:43 INFO] resetting WatchDogTimer
[Status 07:05:44 INFO] Starting Set [AERI set: name A132, 6 scans, 120 angle, D28300 command]
[Ingest 07:05:44 INFO] Sending XML status message
[Status 07:05:44 INFO] Mirror angle: 120
[Mirror 07:05:44 INFO] rotating to position A
[Status 07:05:45 INFO] .SET file for ACQ96 ready
[Ingest 07:05:45 INFO] Starting acquisition
[Status 07:05:45 INFO] reading housekeeping
[Status 07:06:03 INFO] acquire complete
[Status 07:06:04 INFO] writing housekeeping
[Sequencer 07:06:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:06:04 INFO] incremented A scene to 132 completed views
[Sequencer 07:06:04 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:06:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:06:04 INFO] incremented to [AERI set: name H132, 6 scans, 60 angle, D22500 command] set
[sigmove 07:06:04 INFO] A132.SIG(18)
[sigmove 07:06:04 DEBUG] transformed A132Ma.SPC -> A132MA.SPC
[sigmove 07:06:04 DEBUG] transformed A132Mb.SPC -> A132MB.SPC
[sigmove 07:06:04 DEBUG] transformed A132Mc.SPC -> A132MC.SPC
[sigmove 07:06:04 DEBUG] transformed A132Md.SPC -> A132MD.SPC
[sigmove 07:06:04 DEBUG] transformed A132Me.SPC -> A132ME.SPC
[sigmove 07:06:04 DEBUG] transformed A132Mf.SPC -> A132MF.SPC
[Status 07:06:04 INFO] data for A132 transferred to science data processing
[Tidy 07:06:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:06:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:06:04 INFO] resetting WatchDogTimer
[Status 07:06:04 INFO] Starting Set [AERI set: name H132, 6 scans, 60 angle, D22500 command]
[Ingest 07:06:04 INFO] Sending XML status message
[Status 07:06:04 INFO] Mirror angle: 60
[Mirror 07:06:04 INFO] rotating to position H
[Status 07:06:05 INFO] .SET file for ACQ96 ready
[Ingest 07:06:05 INFO] Starting acquisition
[Status 07:06:05 INFO] reading housekeeping
[Status 07:06:23 INFO] acquire complete
[Status 07:06:24 INFO] writing housekeeping
[Sequencer 07:06:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:06:24 INFO] incremented H scene to 132 completed views
[Sequencer 07:06:24 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:06:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:06:24 INFO] incremented to [AERI set: name S132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:06:24 INFO] H132.SIG(18)
[sigmove 07:06:24 DEBUG] transformed H132Ma.SPC -> H132MA.SPC
[sigmove 07:06:24 DEBUG] transformed H132Mb.SPC -> H132MB.SPC
[sigmove 07:06:24 DEBUG] transformed H132Mc.SPC -> H132MC.SPC
[sigmove 07:06:24 DEBUG] transformed H132Md.SPC -> H132MD.SPC
[sigmove 07:06:24 DEBUG] transformed H132Me.SPC -> H132ME.SPC
[sigmove 07:06:24 DEBUG] transformed H132Mf.SPC -> H132MF.SPC
[Status 07:06:24 INFO] data for H132 transferred to science data processing
[Tidy 07:06:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:06:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:06:24 INFO] resetting WatchDogTimer
[Status 07:06:24 INFO] Starting Set [AERI set: name S132, 6 scans, 0 angle, D16300 command]
[Ingest 07:06:24 INFO] Sending XML status message
[Status 07:06:24 INFO] Mirror angle: 0
[Mirror 07:06:24 INFO] rotating to position S
[Status 07:06:25 INFO] .SET file for ACQ96 ready
[Ingest 07:06:25 INFO] Starting acquisition
[Status 07:06:25 INFO] reading housekeeping
[Status 07:06:43 INFO] acquire complete
[Status 07:06:44 INFO] writing housekeeping
[Sequencer 07:06:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:06:44 INFO] incremented S scene to 132 completed views
[Sequencer 07:06:44 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:06:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:06:44 INFO] incremented to [AERI set: name T132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:06:44 INFO] S132.SIG(18)
[sigmove 07:06:44 DEBUG] transformed S132Ma.SPC -> S132MA.SPC
[sigmove 07:06:44 DEBUG] transformed S132Mb.SPC -> S132MB.SPC
[sigmove 07:06:44 DEBUG] transformed S132Mc.SPC -> S132MC.SPC
[sigmove 07:06:44 DEBUG] transformed S132Md.SPC -> S132MD.SPC
[sigmove 07:06:44 DEBUG] transformed S132Me.SPC -> S132ME.SPC
[sigmove 07:06:44 DEBUG] transformed S132Mf.SPC -> S132MF.SPC
[Status 07:06:44 INFO] data for S132 transferred to science data processing
[Tidy 07:06:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:06:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:06:44 INFO] resetting WatchDogTimer
[Status 07:06:44 INFO] Starting Set [AERI set: name T132, 6 scans, 0 angle, D16300 command]
[Ingest 07:06:44 INFO] Sending XML status message
[Status 07:06:44 INFO] Mirror angle: 0
[Mirror 07:06:44 INFO] rotating to position T
[Status 07:06:45 INFO] .SET file for ACQ96 ready
[Ingest 07:06:45 INFO] Starting acquisition
[Status 07:06:45 INFO] reading housekeeping
[Status 07:07:03 INFO] acquire complete
[Status 07:07:03 INFO] writing housekeeping
[Sequencer 07:07:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:07:03 INFO] incremented T scene to 132 completed views
[Sequencer 07:07:03 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:07:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:07:03 INFO] incremented to [AERI set: name U132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:07:03 INFO] T132.SIG(18)
[sigmove 07:07:03 DEBUG] transformed T132Ma.SPC -> T132MA.SPC
[sigmove 07:07:03 DEBUG] transformed T132Mb.SPC -> T132MB.SPC
[sigmove 07:07:03 DEBUG] transformed T132Mc.SPC -> T132MC.SPC
[sigmove 07:07:03 DEBUG] transformed T132Md.SPC -> T132MD.SPC
[sigmove 07:07:03 DEBUG] transformed T132Me.SPC -> T132ME.SPC
[sigmove 07:07:03 DEBUG] transformed T132Mf.SPC -> T132MF.SPC
[Status 07:07:03 INFO] data for T132 transferred to science data processing
[Tidy 07:07:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:07:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:07:03 INFO] resetting WatchDogTimer
[Status 07:07:03 INFO] Starting Set [AERI set: name U132, 6 scans, 0 angle, D16300 command]
[Ingest 07:07:03 INFO] Sending XML status message
[Status 07:07:03 INFO] Mirror angle: 0
[Mirror 07:07:03 INFO] rotating to position U
[Status 07:07:04 INFO] .SET file for ACQ96 ready
[Ingest 07:07:04 INFO] Starting acquisition
[Status 07:07:04 INFO] reading housekeeping
[Status 07:07:22 INFO] acquire complete
[Status 07:07:22 INFO] writing housekeeping
[Sequencer 07:07:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:07:22 INFO] incremented U scene to 132 completed views
[Sequencer 07:07:22 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:07:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:07:22 INFO] incremented to [AERI set: name V132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:07:22 INFO] U132.SIG(18)
[sigmove 07:07:22 DEBUG] transformed U132Ma.SPC -> U132MA.SPC
[sigmove 07:07:22 DEBUG] transformed U132Mb.SPC -> U132MB.SPC
[sigmove 07:07:22 DEBUG] transformed U132Mc.SPC -> U132MC.SPC
[sigmove 07:07:22 DEBUG] transformed U132Md.SPC -> U132MD.SPC
[sigmove 07:07:22 DEBUG] transformed U132Me.SPC -> U132ME.SPC
[sigmove 07:07:22 DEBUG] transformed U132Mf.SPC -> U132MF.SPC
[Status 07:07:22 INFO] data for U132 transferred to science data processing
[Tidy 07:07:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:07:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:07:22 INFO] resetting WatchDogTimer
[Status 07:07:22 INFO] Starting Set [AERI set: name V132, 6 scans, 0 angle, D16300 command]
[Ingest 07:07:22 INFO] Sending XML status message
[Status 07:07:22 INFO] Mirror angle: 0
[Mirror 07:07:22 INFO] rotating to position V
[Status 07:07:23 INFO] .SET file for ACQ96 ready
[Ingest 07:07:23 INFO] Starting acquisition
[Status 07:07:23 INFO] reading housekeeping
[Status 07:07:41 INFO] acquire complete
[Status 07:07:41 INFO] writing housekeeping
[Sequencer 07:07:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:07:41 INFO] incremented V scene to 132 completed views
[Sequencer 07:07:41 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:07:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:07:41 INFO] incremented to [AERI set: name W132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:07:41 INFO] V132.SIG(18)
[sigmove 07:07:41 DEBUG] transformed V132Ma.SPC -> V132MA.SPC
[sigmove 07:07:41 DEBUG] transformed V132Mb.SPC -> V132MB.SPC
[sigmove 07:07:41 DEBUG] transformed V132Mc.SPC -> V132MC.SPC
[sigmove 07:07:41 DEBUG] transformed V132Md.SPC -> V132MD.SPC
[sigmove 07:07:41 DEBUG] transformed V132Me.SPC -> V132ME.SPC
[sigmove 07:07:41 DEBUG] transformed V132Mf.SPC -> V132MF.SPC
[Status 07:07:41 INFO] data for V132 transferred to science data processing
[Tidy 07:07:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:07:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:07:41 INFO] resetting WatchDogTimer
[Status 07:07:41 INFO] Starting Set [AERI set: name W132, 6 scans, 0 angle, D16300 command]
[Ingest 07:07:41 INFO] Sending XML status message
[Status 07:07:41 INFO] Mirror angle: 0
[Mirror 07:07:42 INFO] rotating to position W
[Status 07:07:42 INFO] .SET file for ACQ96 ready
[Ingest 07:07:42 INFO] Starting acquisition
[Status 07:07:42 INFO] reading housekeeping
[Status 07:08:00 INFO] acquire complete
[Status 07:08:00 INFO] writing housekeeping
[Sequencer 07:08:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:08:00 INFO] incremented W scene to 132 completed views
[Sequencer 07:08:00 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:08:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:08:00 INFO] incremented to [AERI set: name X132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:08:00 INFO] W132.SIG(18)
[sigmove 07:08:00 DEBUG] transformed W132Ma.SPC -> W132MA.SPC
[sigmove 07:08:00 DEBUG] transformed W132Mb.SPC -> W132MB.SPC
[sigmove 07:08:00 DEBUG] transformed W132Mc.SPC -> W132MC.SPC
[sigmove 07:08:00 DEBUG] transformed W132Md.SPC -> W132MD.SPC
[sigmove 07:08:00 DEBUG] transformed W132Me.SPC -> W132ME.SPC
[sigmove 07:08:00 DEBUG] transformed W132Mf.SPC -> W132MF.SPC
[Status 07:08:00 INFO] data for W132 transferred to science data processing
[Tidy 07:08:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:08:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:08:00 INFO] resetting WatchDogTimer
[Status 07:08:00 INFO] Starting Set [AERI set: name X132, 6 scans, 0 angle, D16300 command]
[Ingest 07:08:00 INFO] Sending XML status message
[Status 07:08:00 INFO] Mirror angle: 0
[Mirror 07:08:01 INFO] rotating to position X
[Status 07:08:01 INFO] .SET file for ACQ96 ready
[Ingest 07:08:01 INFO] Starting acquisition
[Status 07:08:01 INFO] reading housekeeping
[Status 07:08:19 INFO] acquire complete
[Status 07:08:19 INFO] writing housekeeping
[Sequencer 07:08:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:08:19 INFO] incremented X scene to 132 completed views
[Sequencer 07:08:19 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:08:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:08:19 INFO] incremented to [AERI set: name Y132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:08:19 INFO] X132.SIG(18)
[sigmove 07:08:19 DEBUG] transformed X132Ma.SPC -> X132MA.SPC
[sigmove 07:08:19 DEBUG] transformed X132Mb.SPC -> X132MB.SPC
[sigmove 07:08:19 DEBUG] transformed X132Mc.SPC -> X132MC.SPC
[sigmove 07:08:19 DEBUG] transformed X132Md.SPC -> X132MD.SPC
[sigmove 07:08:19 DEBUG] transformed X132Me.SPC -> X132ME.SPC
[sigmove 07:08:19 DEBUG] transformed X132Mf.SPC -> X132MF.SPC
[Status 07:08:19 INFO] data for X132 transferred to science data processing
[Tidy 07:08:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:08:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:08:19 INFO] resetting WatchDogTimer
[Status 07:08:20 INFO] Starting Set [AERI set: name Y132, 6 scans, 0 angle, D16300 command]
[Ingest 07:08:20 INFO] Sending XML status message
[Status 07:08:20 INFO] Mirror angle: 0
[Mirror 07:08:20 INFO] rotating to position Y
[Status 07:08:20 INFO] .SET file for ACQ96 ready
[Ingest 07:08:20 INFO] Starting acquisition
[Status 07:08:20 INFO] reading housekeeping
[Status 07:08:38 INFO] acquire complete
[Status 07:08:38 INFO] writing housekeeping
[Sequencer 07:08:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:08:38 INFO] incremented Y scene to 132 completed views
[Sequencer 07:08:38 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:08:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:08:38 INFO] incremented to [AERI set: name Z132, 6 scans, 0 angle, D16300 command] set
[sigmove 07:08:38 INFO] Y132.SIG(18)
[sigmove 07:08:38 DEBUG] transformed Y132Ma.SPC -> Y132MA.SPC
[sigmove 07:08:38 DEBUG] transformed Y132Mb.SPC -> Y132MB.SPC
[sigmove 07:08:38 DEBUG] transformed Y132Mc.SPC -> Y132MC.SPC
[sigmove 07:08:38 DEBUG] transformed Y132Md.SPC -> Y132MD.SPC
[sigmove 07:08:38 DEBUG] transformed Y132Me.SPC -> Y132ME.SPC
[sigmove 07:08:38 DEBUG] transformed Y132Mf.SPC -> Y132MF.SPC
[Status 07:08:38 INFO] data for Y132 transferred to science data processing
[Tidy 07:08:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:08:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:08:38 INFO] resetting WatchDogTimer
[Status 07:08:39 INFO] Starting Set [AERI set: name Z132, 6 scans, 0 angle, D16300 command]
[Ingest 07:08:39 INFO] Sending XML status message
[Status 07:08:39 INFO] Mirror angle: 0
[Mirror 07:08:39 INFO] rotating to position Z
[Status 07:08:39 INFO] .SET file for ACQ96 ready
[Ingest 07:08:39 INFO] Starting acquisition
[Status 07:08:39 INFO] reading housekeeping
[Status 07:08:57 INFO] acquire complete
[Status 07:08:57 INFO] writing housekeeping
[Sequencer 07:08:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:08:57 INFO] incremented Z scene to 132 completed views
[Sequencer 07:08:57 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:08:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:08:57 INFO] incremented to [AERI set: name H133, 6 scans, 60 angle, D22500 command] set
[sigmove 07:08:57 INFO] Z132.SIG(18)
[sigmove 07:08:57 DEBUG] transformed Z132Ma.SPC -> Z132MA.SPC
[sigmove 07:08:57 DEBUG] transformed Z132Mb.SPC -> Z132MB.SPC
[sigmove 07:08:57 DEBUG] transformed Z132Mc.SPC -> Z132MC.SPC
[sigmove 07:08:57 DEBUG] transformed Z132Md.SPC -> Z132MD.SPC
[sigmove 07:08:57 DEBUG] transformed Z132Me.SPC -> Z132ME.SPC
[sigmove 07:08:57 DEBUG] transformed Z132Mf.SPC -> Z132MF.SPC
[Status 07:08:57 INFO] data for Z132 transferred to science data processing
[Tidy 07:08:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:08:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:08:58 INFO] resetting WatchDogTimer
[Status 07:08:58 INFO] Starting Set [AERI set: name H133, 6 scans, 60 angle, D22500 command]
[Ingest 07:08:58 INFO] Sending XML status message
[Status 07:08:58 INFO] Mirror angle: 60
[Mirror 07:08:58 INFO] rotating to position H
[Status 07:08:59 INFO] .SET file for ACQ96 ready
[Ingest 07:08:59 INFO] Starting acquisition
[Status 07:08:59 INFO] reading housekeeping
[Status 07:09:17 INFO] acquire complete
[Status 07:09:18 INFO] writing housekeeping
[Sequencer 07:09:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:09:18 INFO] incremented H scene to 133 completed views
[Sequencer 07:09:18 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:09:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:09:18 INFO] incremented to [AERI set: name A133, 6 scans, 120 angle, D28300 command] set
[sigmove 07:09:18 INFO] H133.SIG(18)
[sigmove 07:09:18 DEBUG] transformed H133Ma.SPC -> H133MA.SPC
[sigmove 07:09:18 DEBUG] transformed H133Mb.SPC -> H133MB.SPC
[sigmove 07:09:18 DEBUG] transformed H133Mc.SPC -> H133MC.SPC
[sigmove 07:09:18 DEBUG] transformed H133Md.SPC -> H133MD.SPC
[sigmove 07:09:18 DEBUG] transformed H133Me.SPC -> H133ME.SPC
[sigmove 07:09:18 DEBUG] transformed H133Mf.SPC -> H133MF.SPC
[Status 07:09:18 INFO] data for H133 transferred to science data processing
[Tidy 07:09:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:09:18 INFO] A131.FIN(19),H131.FIN(19),S131.FIN(19),T131.FIN(19),U131.FIN(19),V131.FIN(19),W131.FIN(19),X131.FIN(19),Y131.FIN(19),Z131.FIN(19),A132.FIN(19),H132.FIN(19),S132.FIN(19),T132.FIN(19),U132.FIN(19),V132.FIN(19),W132.FIN(19),X132.FIN(19),Y132.FIN(19),Z132.FIN(19)
[sigmove 07:09:18 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:09:18 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:09:20 DEBUG] done zipping
[WatchDog 07:09:20 INFO] resetting WatchDogTimer
[Status 07:09:21 INFO] Starting Set [AERI set: name A133, 6 scans, 120 angle, D28300 command]
[Ingest 07:09:21 INFO] Sending XML status message
[Status 07:09:21 INFO] Mirror angle: 120
[Mirror 07:09:21 INFO] rotating to position A
[Status 07:09:22 INFO] .SET file for ACQ96 ready
[Ingest 07:09:22 INFO] Starting acquisition
[Status 07:09:22 INFO] reading housekeeping
[Status 07:09:40 INFO] acquire complete
[Status 07:09:40 INFO] writing housekeeping
[Sequencer 07:09:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:09:40 INFO] incremented A scene to 133 completed views
[Sequencer 07:09:40 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:09:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:09:40 INFO] incremented to [AERI set: name S133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:09:40 INFO] A133.SIG(18)
[sigmove 07:09:40 DEBUG] transformed A133Ma.SPC -> A133MA.SPC
[sigmove 07:09:40 DEBUG] transformed A133Mb.SPC -> A133MB.SPC
[sigmove 07:09:40 DEBUG] transformed A133Mc.SPC -> A133MC.SPC
[sigmove 07:09:40 DEBUG] transformed A133Md.SPC -> A133MD.SPC
[sigmove 07:09:40 DEBUG] transformed A133Me.SPC -> A133ME.SPC
[sigmove 07:09:40 DEBUG] transformed A133Mf.SPC -> A133MF.SPC
[Status 07:09:40 INFO] data for A133 transferred to science data processing
[Tidy 07:09:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:09:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:09:40 INFO] resetting WatchDogTimer
[Status 07:09:40 INFO] Starting Set [AERI set: name S133, 6 scans, 0 angle, D16300 command]
[Ingest 07:09:40 INFO] Sending XML status message
[Status 07:09:40 INFO] Mirror angle: 0
[Mirror 07:09:41 INFO] rotating to position S
[Status 07:09:42 INFO] .SET file for ACQ96 ready
[Ingest 07:09:42 INFO] Starting acquisition
[Status 07:09:42 INFO] reading housekeeping
[Status 07:10:00 INFO] acquire complete
[Status 07:10:00 INFO] writing housekeeping
[Sequencer 07:10:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:10:00 INFO] incremented S scene to 133 completed views
[Sequencer 07:10:00 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:10:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:10:00 INFO] incremented to [AERI set: name T133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:10:00 INFO] S133.SIG(18)
[sigmove 07:10:00 DEBUG] transformed S133Ma.SPC -> S133MA.SPC
[sigmove 07:10:00 DEBUG] transformed S133Mb.SPC -> S133MB.SPC
[sigmove 07:10:00 DEBUG] transformed S133Mc.SPC -> S133MC.SPC
[sigmove 07:10:00 DEBUG] transformed S133Md.SPC -> S133MD.SPC
[sigmove 07:10:00 DEBUG] transformed S133Me.SPC -> S133ME.SPC
[sigmove 07:10:00 DEBUG] transformed S133Mf.SPC -> S133MF.SPC
[Status 07:10:00 INFO] data for S133 transferred to science data processing
[Tidy 07:10:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:10:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:10:00 INFO] resetting WatchDogTimer
[Status 07:10:01 INFO] Starting Set [AERI set: name T133, 6 scans, 0 angle, D16300 command]
[Ingest 07:10:01 INFO] Sending XML status message
[Status 07:10:01 INFO] Mirror angle: 0
[Mirror 07:10:01 INFO] rotating to position T
[Status 07:10:01 INFO] .SET file for ACQ96 ready
[Ingest 07:10:01 INFO] Starting acquisition
[Status 07:10:01 INFO] reading housekeeping
[Status 07:10:19 INFO] acquire complete
[Status 07:10:19 INFO] writing housekeeping
[Sequencer 07:10:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:10:19 INFO] incremented T scene to 133 completed views
[Sequencer 07:10:19 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:10:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:10:19 INFO] incremented to [AERI set: name U133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:10:19 INFO] T133.SIG(18)
[sigmove 07:10:19 DEBUG] transformed T133Ma.SPC -> T133MA.SPC
[sigmove 07:10:19 DEBUG] transformed T133Mb.SPC -> T133MB.SPC
[sigmove 07:10:19 DEBUG] transformed T133Mc.SPC -> T133MC.SPC
[sigmove 07:10:19 DEBUG] transformed T133Md.SPC -> T133MD.SPC
[sigmove 07:10:19 DEBUG] transformed T133Me.SPC -> T133ME.SPC
[sigmove 07:10:19 DEBUG] transformed T133Mf.SPC -> T133MF.SPC
[Status 07:10:19 INFO] data for T133 transferred to science data processing
[Tidy 07:10:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:10:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:10:19 INFO] resetting WatchDogTimer
[Status 07:10:20 INFO] Starting Set [AERI set: name U133, 6 scans, 0 angle, D16300 command]
[Ingest 07:10:20 INFO] Sending XML status message
[Status 07:10:20 INFO] Mirror angle: 0
[Mirror 07:10:20 INFO] rotating to position U
[Status 07:10:20 INFO] .SET file for ACQ96 ready
[Ingest 07:10:20 INFO] Starting acquisition
[Status 07:10:20 INFO] reading housekeeping
[Status 07:10:38 INFO] acquire complete
[Status 07:10:38 INFO] writing housekeeping
[Sequencer 07:10:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:10:38 INFO] incremented U scene to 133 completed views
[Sequencer 07:10:38 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:10:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:10:38 INFO] incremented to [AERI set: name V133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:10:38 INFO] U133.SIG(18)
[sigmove 07:10:39 DEBUG] transformed U133Ma.SPC -> U133MA.SPC
[sigmove 07:10:39 DEBUG] transformed U133Mb.SPC -> U133MB.SPC
[sigmove 07:10:39 DEBUG] transformed U133Mc.SPC -> U133MC.SPC
[sigmove 07:10:39 DEBUG] transformed U133Md.SPC -> U133MD.SPC
[sigmove 07:10:39 DEBUG] transformed U133Me.SPC -> U133ME.SPC
[sigmove 07:10:39 DEBUG] transformed U133Mf.SPC -> U133MF.SPC
[Status 07:10:39 INFO] data for U133 transferred to science data processing
[Tidy 07:10:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:10:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:10:39 INFO] resetting WatchDogTimer
[Status 07:10:39 INFO] Starting Set [AERI set: name V133, 6 scans, 0 angle, D16300 command]
[Ingest 07:10:39 INFO] Sending XML status message
[Status 07:10:39 INFO] Mirror angle: 0
[Mirror 07:10:39 INFO] rotating to position V
[Status 07:10:39 INFO] .SET file for ACQ96 ready
[Ingest 07:10:39 INFO] Starting acquisition
[Status 07:10:40 INFO] reading housekeeping
[Status 07:10:57 INFO] acquire complete
[Status 07:10:58 INFO] writing housekeeping
[Sequencer 07:10:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:10:58 INFO] incremented V scene to 133 completed views
[Sequencer 07:10:58 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:10:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:10:58 INFO] incremented to [AERI set: name W133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:10:58 INFO] V133.SIG(18)
[sigmove 07:10:58 DEBUG] transformed V133Ma.SPC -> V133MA.SPC
[sigmove 07:10:58 DEBUG] transformed V133Mb.SPC -> V133MB.SPC
[sigmove 07:10:58 DEBUG] transformed V133Mc.SPC -> V133MC.SPC
[sigmove 07:10:58 DEBUG] transformed V133Md.SPC -> V133MD.SPC
[sigmove 07:10:58 DEBUG] transformed V133Me.SPC -> V133ME.SPC
[sigmove 07:10:58 DEBUG] transformed V133Mf.SPC -> V133MF.SPC
[Status 07:10:58 INFO] data for V133 transferred to science data processing
[Tidy 07:10:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:10:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:10:58 INFO] resetting WatchDogTimer
[Status 07:10:58 INFO] Starting Set [AERI set: name W133, 6 scans, 0 angle, D16300 command]
[Ingest 07:10:58 INFO] Sending XML status message
[Status 07:10:58 INFO] Mirror angle: 0
[Mirror 07:10:58 INFO] rotating to position W
[Status 07:10:58 INFO] .SET file for ACQ96 ready
[Ingest 07:10:58 INFO] Starting acquisition
[Status 07:10:59 INFO] reading housekeeping
[Status 07:11:16 INFO] acquire complete
[Status 07:11:17 INFO] writing housekeeping
[Sequencer 07:11:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:11:17 INFO] incremented W scene to 133 completed views
[Sequencer 07:11:17 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:11:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:11:17 INFO] incremented to [AERI set: name X133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:11:17 INFO] W133.SIG(18)
[sigmove 07:11:17 DEBUG] transformed W133Ma.SPC -> W133MA.SPC
[sigmove 07:11:17 DEBUG] transformed W133Mb.SPC -> W133MB.SPC
[sigmove 07:11:17 DEBUG] transformed W133Mc.SPC -> W133MC.SPC
[sigmove 07:11:17 DEBUG] transformed W133Md.SPC -> W133MD.SPC
[sigmove 07:11:17 DEBUG] transformed W133Me.SPC -> W133ME.SPC
[sigmove 07:11:17 DEBUG] transformed W133Mf.SPC -> W133MF.SPC
[Status 07:11:17 INFO] data for W133 transferred to science data processing
[Tidy 07:11:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:11:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:11:17 INFO] resetting WatchDogTimer
[Status 07:11:17 INFO] Starting Set [AERI set: name X133, 6 scans, 0 angle, D16300 command]
[Ingest 07:11:17 INFO] Sending XML status message
[Status 07:11:17 INFO] Mirror angle: 0
[Mirror 07:11:17 INFO] rotating to position X
[Status 07:11:17 INFO] .SET file for ACQ96 ready
[Ingest 07:11:17 INFO] Starting acquisition
[Status 07:11:18 INFO] reading housekeeping
[Status 07:11:35 INFO] acquire complete
[Status 07:11:36 INFO] writing housekeeping
[Sequencer 07:11:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:11:36 INFO] incremented X scene to 133 completed views
[Sequencer 07:11:36 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:11:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:11:36 INFO] incremented to [AERI set: name Y133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:11:36 INFO] X133.SIG(18)
[sigmove 07:11:36 DEBUG] transformed X133Ma.SPC -> X133MA.SPC
[sigmove 07:11:36 DEBUG] transformed X133Mb.SPC -> X133MB.SPC
[sigmove 07:11:36 DEBUG] transformed X133Mc.SPC -> X133MC.SPC
[sigmove 07:11:36 DEBUG] transformed X133Md.SPC -> X133MD.SPC
[sigmove 07:11:36 DEBUG] transformed X133Me.SPC -> X133ME.SPC
[sigmove 07:11:36 DEBUG] transformed X133Mf.SPC -> X133MF.SPC
[Status 07:11:36 INFO] data for X133 transferred to science data processing
[Tidy 07:11:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:11:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:11:36 INFO] resetting WatchDogTimer
[Status 07:11:36 INFO] Starting Set [AERI set: name Y133, 6 scans, 0 angle, D16300 command]
[Ingest 07:11:36 INFO] Sending XML status message
[Status 07:11:36 INFO] Mirror angle: 0
[Mirror 07:11:36 INFO] rotating to position Y
[Status 07:11:36 INFO] .SET file for ACQ96 ready
[Ingest 07:11:37 INFO] Starting acquisition
[Status 07:11:37 INFO] reading housekeeping
[Status 07:11:54 INFO] acquire complete
[Status 07:11:55 INFO] writing housekeeping
[Sequencer 07:11:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:11:55 INFO] incremented Y scene to 133 completed views
[Sequencer 07:11:55 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:11:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:11:55 INFO] incremented to [AERI set: name Z133, 6 scans, 0 angle, D16300 command] set
[sigmove 07:11:55 INFO] Y133.SIG(18)
[sigmove 07:11:55 DEBUG] transformed Y133Ma.SPC -> Y133MA.SPC
[sigmove 07:11:55 DEBUG] transformed Y133Mb.SPC -> Y133MB.SPC
[sigmove 07:11:55 DEBUG] transformed Y133Mc.SPC -> Y133MC.SPC
[sigmove 07:11:55 DEBUG] transformed Y133Md.SPC -> Y133MD.SPC
[sigmove 07:11:55 DEBUG] transformed Y133Me.SPC -> Y133ME.SPC
[sigmove 07:11:55 DEBUG] transformed Y133Mf.SPC -> Y133MF.SPC
[Status 07:11:55 INFO] data for Y133 transferred to science data processing
[Tidy 07:11:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:11:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:11:55 INFO] resetting WatchDogTimer
[Status 07:11:55 INFO] Starting Set [AERI set: name Z133, 6 scans, 0 angle, D16300 command]
[Ingest 07:11:55 INFO] Sending XML status message
[Status 07:11:55 INFO] Mirror angle: 0
[Mirror 07:11:55 INFO] rotating to position Z
[Status 07:11:55 INFO] .SET file for ACQ96 ready
[Ingest 07:11:56 INFO] Starting acquisition
[Status 07:11:56 INFO] reading housekeeping
[Status 07:12:13 INFO] acquire complete
[Status 07:12:14 INFO] writing housekeeping
[Sequencer 07:12:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:12:14 INFO] incremented Z scene to 133 completed views
[Sequencer 07:12:14 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:12:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:12:14 INFO] incremented to [AERI set: name A134, 6 scans, 120 angle, D28300 command] set
[sigmove 07:12:14 INFO] Z133.SIG(18)
[sigmove 07:12:14 DEBUG] transformed Z133Ma.SPC -> Z133MA.SPC
[sigmove 07:12:14 DEBUG] transformed Z133Mb.SPC -> Z133MB.SPC
[sigmove 07:12:14 DEBUG] transformed Z133Mc.SPC -> Z133MC.SPC
[sigmove 07:12:14 DEBUG] transformed Z133Md.SPC -> Z133MD.SPC
[sigmove 07:12:14 DEBUG] transformed Z133Me.SPC -> Z133ME.SPC
[sigmove 07:12:14 DEBUG] transformed Z133Mf.SPC -> Z133MF.SPC
[Status 07:12:14 INFO] data for Z133 transferred to science data processing
[Tidy 07:12:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:12:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:12:14 INFO] resetting WatchDogTimer
[Status 07:12:14 INFO] Starting Set [AERI set: name A134, 6 scans, 120 angle, D28300 command]
[Ingest 07:12:14 INFO] Sending XML status message
[Status 07:12:14 INFO] Mirror angle: 120
[Mirror 07:12:14 INFO] rotating to position A
[Status 07:12:16 INFO] .SET file for ACQ96 ready
[Ingest 07:12:16 INFO] Starting acquisition
[Status 07:12:16 INFO] reading housekeeping
[Status 07:12:34 INFO] acquire complete
[Status 07:12:34 INFO] writing housekeeping
[Sequencer 07:12:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:12:34 INFO] incremented A scene to 134 completed views
[Sequencer 07:12:34 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:12:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:12:34 INFO] incremented to [AERI set: name H134, 6 scans, 60 angle, D22500 command] set
[sigmove 07:12:34 INFO] A134.SIG(18)
[sigmove 07:12:34 DEBUG] transformed A134Ma.SPC -> A134MA.SPC
[sigmove 07:12:34 DEBUG] transformed A134Mb.SPC -> A134MB.SPC
[sigmove 07:12:34 DEBUG] transformed A134Mc.SPC -> A134MC.SPC
[sigmove 07:12:34 DEBUG] transformed A134Md.SPC -> A134MD.SPC
[sigmove 07:12:34 DEBUG] transformed A134Me.SPC -> A134ME.SPC
[sigmove 07:12:34 DEBUG] transformed A134Mf.SPC -> A134MF.SPC
[Status 07:12:34 INFO] data for A134 transferred to science data processing
[Tidy 07:12:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:12:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:12:34 INFO] resetting WatchDogTimer
[Status 07:12:34 INFO] Starting Set [AERI set: name H134, 6 scans, 60 angle, D22500 command]
[Ingest 07:12:34 INFO] Sending XML status message
[Status 07:12:34 INFO] Mirror angle: 60
[Mirror 07:12:34 INFO] rotating to position H
[Status 07:12:35 INFO] .SET file for ACQ96 ready
[Ingest 07:12:35 INFO] Starting acquisition
[Status 07:12:36 INFO] reading housekeeping
[Status 07:12:54 INFO] acquire complete
[Status 07:12:54 INFO] writing housekeeping
[Sequencer 07:12:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:12:54 INFO] incremented H scene to 134 completed views
[Sequencer 07:12:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:12:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:12:54 INFO] incremented to [AERI set: name S134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:12:54 INFO] H134.SIG(18)
[sigmove 07:12:54 DEBUG] transformed H134Ma.SPC -> H134MA.SPC
[sigmove 07:12:54 DEBUG] transformed H134Mb.SPC -> H134MB.SPC
[sigmove 07:12:54 DEBUG] transformed H134Mc.SPC -> H134MC.SPC
[sigmove 07:12:54 DEBUG] transformed H134Md.SPC -> H134MD.SPC
[sigmove 07:12:54 DEBUG] transformed H134Me.SPC -> H134ME.SPC
[sigmove 07:12:54 DEBUG] transformed H134Mf.SPC -> H134MF.SPC
[Status 07:12:54 INFO] data for H134 transferred to science data processing
[Tidy 07:12:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:12:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:12:54 INFO] resetting WatchDogTimer
[Status 07:12:54 INFO] Starting Set [AERI set: name S134, 6 scans, 0 angle, D16300 command]
[Ingest 07:12:54 INFO] Sending XML status message
[Status 07:12:54 INFO] Mirror angle: 0
[Mirror 07:12:55 INFO] rotating to position S
[Status 07:12:55 INFO] .SET file for ACQ96 ready
[Ingest 07:12:56 INFO] Starting acquisition
[Status 07:12:56 INFO] reading housekeeping
[Status 07:13:14 INFO] acquire complete
[Status 07:13:14 INFO] writing housekeeping
[Sequencer 07:13:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:13:14 INFO] incremented S scene to 134 completed views
[Sequencer 07:13:14 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:13:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:13:14 INFO] incremented to [AERI set: name T134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:13:14 INFO] S134.SIG(18)
[sigmove 07:13:14 DEBUG] transformed S134Ma.SPC -> S134MA.SPC
[sigmove 07:13:14 DEBUG] transformed S134Mb.SPC -> S134MB.SPC
[sigmove 07:13:14 DEBUG] transformed S134Mc.SPC -> S134MC.SPC
[sigmove 07:13:14 DEBUG] transformed S134Md.SPC -> S134MD.SPC
[sigmove 07:13:14 DEBUG] transformed S134Me.SPC -> S134ME.SPC
[sigmove 07:13:14 DEBUG] transformed S134Mf.SPC -> S134MF.SPC
[Status 07:13:14 INFO] data for S134 transferred to science data processing
[Tidy 07:13:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:13:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:13:14 INFO] resetting WatchDogTimer
[Status 07:13:15 INFO] Starting Set [AERI set: name T134, 6 scans, 0 angle, D16300 command]
[Ingest 07:13:15 INFO] Sending XML status message
[Status 07:13:15 INFO] Mirror angle: 0
[Mirror 07:13:15 INFO] rotating to position T
[Status 07:13:15 INFO] .SET file for ACQ96 ready
[Ingest 07:13:15 INFO] Starting acquisition
[Status 07:13:15 INFO] reading housekeeping
[Status 07:13:33 INFO] acquire complete
[Status 07:13:34 INFO] writing housekeeping
[Sequencer 07:13:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:13:34 INFO] incremented T scene to 134 completed views
[Sequencer 07:13:34 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:13:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:13:34 INFO] incremented to [AERI set: name U134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:13:34 INFO] T134.SIG(18)
[sigmove 07:13:34 DEBUG] transformed T134Ma.SPC -> T134MA.SPC
[sigmove 07:13:34 DEBUG] transformed T134Mb.SPC -> T134MB.SPC
[sigmove 07:13:34 DEBUG] transformed T134Mc.SPC -> T134MC.SPC
[sigmove 07:13:34 DEBUG] transformed T134Md.SPC -> T134MD.SPC
[sigmove 07:13:34 DEBUG] transformed T134Me.SPC -> T134ME.SPC
[sigmove 07:13:34 DEBUG] transformed T134Mf.SPC -> T134MF.SPC
[Status 07:13:34 INFO] data for T134 transferred to science data processing
[Tidy 07:13:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:13:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:13:34 INFO] resetting WatchDogTimer
[Status 07:13:34 INFO] Starting Set [AERI set: name U134, 6 scans, 0 angle, D16300 command]
[Ingest 07:13:34 INFO] Sending XML status message
[Status 07:13:34 INFO] Mirror angle: 0
[Mirror 07:13:34 INFO] rotating to position U
[Status 07:13:34 INFO] .SET file for ACQ96 ready
[Ingest 07:13:34 INFO] Starting acquisition
[Status 07:13:35 INFO] reading housekeeping
[Status 07:13:52 INFO] acquire complete
[Status 07:13:53 INFO] writing housekeeping
[Sequencer 07:13:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:13:53 INFO] incremented U scene to 134 completed views
[Sequencer 07:13:53 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:13:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:13:53 INFO] incremented to [AERI set: name V134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:13:53 INFO] U134.SIG(18)
[sigmove 07:13:53 DEBUG] transformed U134Ma.SPC -> U134MA.SPC
[sigmove 07:13:53 DEBUG] transformed U134Mb.SPC -> U134MB.SPC
[sigmove 07:13:53 DEBUG] transformed U134Mc.SPC -> U134MC.SPC
[sigmove 07:13:53 DEBUG] transformed U134Md.SPC -> U134MD.SPC
[sigmove 07:13:53 DEBUG] transformed U134Me.SPC -> U134ME.SPC
[sigmove 07:13:53 DEBUG] transformed U134Mf.SPC -> U134MF.SPC
[Status 07:13:53 INFO] data for U134 transferred to science data processing
[Tidy 07:13:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:13:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:13:53 INFO] resetting WatchDogTimer
[Status 07:13:53 INFO] Starting Set [AERI set: name V134, 6 scans, 0 angle, D16300 command]
[Ingest 07:13:53 INFO] Sending XML status message
[Status 07:13:53 INFO] Mirror angle: 0
[Mirror 07:13:53 INFO] rotating to position V
[Status 07:13:53 INFO] .SET file for ACQ96 ready
[Ingest 07:13:53 INFO] Starting acquisition
[Status 07:13:54 INFO] reading housekeeping
[Status 07:14:11 INFO] acquire complete
[Status 07:14:12 INFO] writing housekeeping
[Sequencer 07:14:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:14:12 INFO] incremented V scene to 134 completed views
[Sequencer 07:14:12 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:14:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:14:12 INFO] incremented to [AERI set: name W134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:14:12 INFO] V134.SIG(18)
[sigmove 07:14:12 DEBUG] transformed V134Ma.SPC -> V134MA.SPC
[sigmove 07:14:12 DEBUG] transformed V134Mb.SPC -> V134MB.SPC
[sigmove 07:14:12 DEBUG] transformed V134Mc.SPC -> V134MC.SPC
[sigmove 07:14:12 DEBUG] transformed V134Md.SPC -> V134MD.SPC
[sigmove 07:14:12 DEBUG] transformed V134Me.SPC -> V134ME.SPC
[sigmove 07:14:12 DEBUG] transformed V134Mf.SPC -> V134MF.SPC
[Status 07:14:12 INFO] data for V134 transferred to science data processing
[Tidy 07:14:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:14:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:14:12 INFO] resetting WatchDogTimer
[Status 07:14:12 INFO] Starting Set [AERI set: name W134, 6 scans, 0 angle, D16300 command]
[Ingest 07:14:12 INFO] Sending XML status message
[Status 07:14:12 INFO] Mirror angle: 0
[Mirror 07:14:12 INFO] rotating to position W
[Status 07:14:12 INFO] .SET file for ACQ96 ready
[Ingest 07:14:13 INFO] Starting acquisition
[Status 07:14:13 INFO] reading housekeeping
[Status 07:14:30 INFO] acquire complete
[Status 07:14:31 INFO] writing housekeeping
[Sequencer 07:14:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:14:31 INFO] incremented W scene to 134 completed views
[Sequencer 07:14:31 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:14:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:14:31 INFO] incremented to [AERI set: name X134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:14:31 INFO] W134.SIG(18)
[sigmove 07:14:31 DEBUG] transformed W134Ma.SPC -> W134MA.SPC
[sigmove 07:14:31 DEBUG] transformed W134Mb.SPC -> W134MB.SPC
[sigmove 07:14:31 DEBUG] transformed W134Mc.SPC -> W134MC.SPC
[sigmove 07:14:31 DEBUG] transformed W134Md.SPC -> W134MD.SPC
[sigmove 07:14:31 DEBUG] transformed W134Me.SPC -> W134ME.SPC
[sigmove 07:14:31 DEBUG] transformed W134Mf.SPC -> W134MF.SPC
[Status 07:14:31 INFO] data for W134 transferred to science data processing
[Tidy 07:14:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:14:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:14:31 INFO] resetting WatchDogTimer
[Status 07:14:31 INFO] Starting Set [AERI set: name X134, 6 scans, 0 angle, D16300 command]
[Ingest 07:14:31 INFO] Sending XML status message
[Status 07:14:31 INFO] Mirror angle: 0
[Mirror 07:14:31 INFO] rotating to position X
[Status 07:14:31 INFO] .SET file for ACQ96 ready
[Ingest 07:14:32 INFO] Starting acquisition
[Status 07:14:32 INFO] reading housekeeping
[Status 07:14:49 INFO] acquire complete
[Status 07:14:50 INFO] writing housekeeping
[Sequencer 07:14:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:14:50 INFO] incremented X scene to 134 completed views
[Sequencer 07:14:50 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:14:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:14:50 INFO] incremented to [AERI set: name Y134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:14:50 INFO] X134.SIG(18)
[sigmove 07:14:50 DEBUG] transformed X134Ma.SPC -> X134MA.SPC
[sigmove 07:14:50 DEBUG] transformed X134Mb.SPC -> X134MB.SPC
[sigmove 07:14:50 DEBUG] transformed X134Mc.SPC -> X134MC.SPC
[sigmove 07:14:50 DEBUG] transformed X134Md.SPC -> X134MD.SPC
[sigmove 07:14:50 DEBUG] transformed X134Me.SPC -> X134ME.SPC
[sigmove 07:14:50 DEBUG] transformed X134Mf.SPC -> X134MF.SPC
[Status 07:14:50 INFO] data for X134 transferred to science data processing
[Tidy 07:14:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:14:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:14:50 INFO] resetting WatchDogTimer
[Status 07:14:50 INFO] Starting Set [AERI set: name Y134, 6 scans, 0 angle, D16300 command]
[Ingest 07:14:50 INFO] Sending XML status message
[Status 07:14:50 INFO] Mirror angle: 0
[Mirror 07:14:50 INFO] rotating to position Y
[Status 07:14:51 INFO] .SET file for ACQ96 ready
[Ingest 07:14:51 INFO] Starting acquisition
[Status 07:14:51 INFO] reading housekeeping
[Status 07:15:08 INFO] acquire complete
[Status 07:15:09 INFO] writing housekeeping
[Sequencer 07:15:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:15:09 INFO] incremented Y scene to 134 completed views
[Sequencer 07:15:09 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:15:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:15:09 INFO] incremented to [AERI set: name Z134, 6 scans, 0 angle, D16300 command] set
[sigmove 07:15:09 INFO] Y134.SIG(18)
[sigmove 07:15:09 DEBUG] transformed Y134Ma.SPC -> Y134MA.SPC
[sigmove 07:15:09 DEBUG] transformed Y134Mb.SPC -> Y134MB.SPC
[sigmove 07:15:09 DEBUG] transformed Y134Mc.SPC -> Y134MC.SPC
[sigmove 07:15:09 DEBUG] transformed Y134Md.SPC -> Y134MD.SPC
[sigmove 07:15:09 DEBUG] transformed Y134Me.SPC -> Y134ME.SPC
[sigmove 07:15:09 DEBUG] transformed Y134Mf.SPC -> Y134MF.SPC
[Status 07:15:09 INFO] data for Y134 transferred to science data processing
[Tidy 07:15:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:15:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:15:09 INFO] resetting WatchDogTimer
[Status 07:15:09 INFO] Starting Set [AERI set: name Z134, 6 scans, 0 angle, D16300 command]
[Ingest 07:15:09 INFO] Sending XML status message
[Status 07:15:09 INFO] Mirror angle: 0
[Mirror 07:15:09 INFO] rotating to position Z
[Status 07:15:10 INFO] .SET file for ACQ96 ready
[Ingest 07:15:10 INFO] Starting acquisition
[Status 07:15:10 INFO] reading housekeeping
[Status 07:15:27 INFO] acquire complete
[Status 07:15:28 INFO] writing housekeeping
[Sequencer 07:15:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:15:28 INFO] incremented Z scene to 134 completed views
[Sequencer 07:15:28 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:15:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:15:28 INFO] incremented to [AERI set: name H135, 6 scans, 60 angle, D22500 command] set
[sigmove 07:15:28 INFO] Z134.SIG(18)
[sigmove 07:15:28 DEBUG] transformed Z134Ma.SPC -> Z134MA.SPC
[sigmove 07:15:28 DEBUG] transformed Z134Mb.SPC -> Z134MB.SPC
[sigmove 07:15:28 DEBUG] transformed Z134Mc.SPC -> Z134MC.SPC
[sigmove 07:15:28 DEBUG] transformed Z134Md.SPC -> Z134MD.SPC
[sigmove 07:15:28 DEBUG] transformed Z134Me.SPC -> Z134ME.SPC
[sigmove 07:15:28 DEBUG] transformed Z134Mf.SPC -> Z134MF.SPC
[Status 07:15:28 INFO] data for Z134 transferred to science data processing
[Tidy 07:15:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:15:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:15:28 INFO] resetting WatchDogTimer
[Status 07:15:28 INFO] Starting Set [AERI set: name H135, 6 scans, 60 angle, D22500 command]
[Ingest 07:15:28 INFO] Sending XML status message
[Status 07:15:28 INFO] Mirror angle: 60
[Mirror 07:15:28 INFO] rotating to position H
[Status 07:15:29 INFO] .SET file for ACQ96 ready
[Ingest 07:15:29 INFO] Starting acquisition
[Status 07:15:30 INFO] reading housekeeping
[Status 07:15:48 INFO] acquire complete
[Status 07:15:48 INFO] writing housekeeping
[Sequencer 07:15:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:15:48 INFO] incremented H scene to 135 completed views
[Sequencer 07:15:48 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:15:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:15:48 INFO] incremented to [AERI set: name A135, 6 scans, 120 angle, D28300 command] set
[sigmove 07:15:48 INFO] H135.SIG(18)
[sigmove 07:15:48 DEBUG] transformed H135Ma.SPC -> H135MA.SPC
[sigmove 07:15:48 DEBUG] transformed H135Mb.SPC -> H135MB.SPC
[sigmove 07:15:48 DEBUG] transformed H135Mc.SPC -> H135MC.SPC
[sigmove 07:15:48 DEBUG] transformed H135Md.SPC -> H135MD.SPC
[sigmove 07:15:48 DEBUG] transformed H135Me.SPC -> H135ME.SPC
[sigmove 07:15:48 DEBUG] transformed H135Mf.SPC -> H135MF.SPC
[Status 07:15:48 INFO] data for H135 transferred to science data processing
[Tidy 07:15:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:15:48 INFO] A133.FIN(19),H133.FIN(19),S133.FIN(19),T133.FIN(19),U133.FIN(19),V133.FIN(19),W133.FIN(19),X133.FIN(19),Y133.FIN(19),Z133.FIN(19),A134.FIN(19),H134.FIN(19),S134.FIN(19),T134.FIN(19),U134.FIN(19),V134.FIN(19),W134.FIN(19),X134.FIN(19),Y134.FIN(19),Z134.FIN(19)
[sigmove 07:15:48 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:15:48 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:15:51 DEBUG] done zipping
[WatchDog 07:15:51 INFO] resetting WatchDogTimer
[Status 07:15:51 INFO] Starting Set [AERI set: name A135, 6 scans, 120 angle, D28300 command]
[Ingest 07:15:51 INFO] Sending XML status message
[Status 07:15:51 INFO] Mirror angle: 120
[Mirror 07:15:51 INFO] rotating to position A
[Status 07:15:52 INFO] .SET file for ACQ96 ready
[Ingest 07:15:52 INFO] Starting acquisition
[Status 07:15:52 INFO] reading housekeeping
[Status 07:16:10 INFO] acquire complete
[Status 07:16:11 INFO] writing housekeeping
[Sequencer 07:16:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:16:11 INFO] incremented A scene to 135 completed views
[Sequencer 07:16:11 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:16:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:16:11 INFO] incremented to [AERI set: name S135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:16:11 INFO] A135.SIG(18)
[sigmove 07:16:11 DEBUG] transformed A135Ma.SPC -> A135MA.SPC
[sigmove 07:16:11 DEBUG] transformed A135Mb.SPC -> A135MB.SPC
[sigmove 07:16:11 DEBUG] transformed A135Mc.SPC -> A135MC.SPC
[sigmove 07:16:11 DEBUG] transformed A135Md.SPC -> A135MD.SPC
[sigmove 07:16:11 DEBUG] transformed A135Me.SPC -> A135ME.SPC
[sigmove 07:16:11 DEBUG] transformed A135Mf.SPC -> A135MF.SPC
[Status 07:16:11 INFO] data for A135 transferred to science data processing
[Tidy 07:16:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:16:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:16:11 INFO] resetting WatchDogTimer
[Status 07:16:11 INFO] Starting Set [AERI set: name S135, 6 scans, 0 angle, D16300 command]
[Ingest 07:16:11 INFO] Sending XML status message
[Status 07:16:11 INFO] Mirror angle: 0
[Mirror 07:16:11 INFO] rotating to position S
[Status 07:16:12 INFO] .SET file for ACQ96 ready
[Ingest 07:16:13 INFO] Starting acquisition
[Status 07:16:13 INFO] reading housekeeping
[Status 07:16:30 INFO] acquire complete
[Status 07:16:31 INFO] writing housekeeping
[Sequencer 07:16:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:16:31 INFO] incremented S scene to 135 completed views
[Sequencer 07:16:31 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:16:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:16:31 INFO] incremented to [AERI set: name T135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:16:31 INFO] S135.SIG(18)
[sigmove 07:16:31 DEBUG] transformed S135Ma.SPC -> S135MA.SPC
[sigmove 07:16:31 DEBUG] transformed S135Mb.SPC -> S135MB.SPC
[sigmove 07:16:31 DEBUG] transformed S135Mc.SPC -> S135MC.SPC
[sigmove 07:16:31 DEBUG] transformed S135Md.SPC -> S135MD.SPC
[sigmove 07:16:31 DEBUG] transformed S135Me.SPC -> S135ME.SPC
[sigmove 07:16:31 DEBUG] transformed S135Mf.SPC -> S135MF.SPC
[Status 07:16:31 INFO] data for S135 transferred to science data processing
[Tidy 07:16:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:16:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:16:31 INFO] resetting WatchDogTimer
[Status 07:16:31 INFO] Starting Set [AERI set: name T135, 6 scans, 0 angle, D16300 command]
[Ingest 07:16:31 INFO] Sending XML status message
[Status 07:16:31 INFO] Mirror angle: 0
[Mirror 07:16:31 INFO] rotating to position T
[Status 07:16:32 INFO] .SET file for ACQ96 ready
[Ingest 07:16:32 INFO] Starting acquisition
[Status 07:16:32 INFO] reading housekeeping
[Status 07:16:49 INFO] acquire complete
[Status 07:16:50 INFO] writing housekeeping
[Sequencer 07:16:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:16:50 INFO] incremented T scene to 135 completed views
[Sequencer 07:16:50 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:16:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:16:50 INFO] incremented to [AERI set: name U135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:16:50 INFO] T135.SIG(18)
[sigmove 07:16:50 DEBUG] transformed T135Ma.SPC -> T135MA.SPC
[sigmove 07:16:50 DEBUG] transformed T135Mb.SPC -> T135MB.SPC
[sigmove 07:16:50 DEBUG] transformed T135Mc.SPC -> T135MC.SPC
[sigmove 07:16:50 DEBUG] transformed T135Md.SPC -> T135MD.SPC
[sigmove 07:16:50 DEBUG] transformed T135Me.SPC -> T135ME.SPC
[sigmove 07:16:50 DEBUG] transformed T135Mf.SPC -> T135MF.SPC
[Status 07:16:50 INFO] data for T135 transferred to science data processing
[Tidy 07:16:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:16:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:16:50 INFO] resetting WatchDogTimer
[Status 07:16:50 INFO] Starting Set [AERI set: name U135, 6 scans, 0 angle, D16300 command]
[Ingest 07:16:50 INFO] Sending XML status message
[Status 07:16:50 INFO] Mirror angle: 0
[Mirror 07:16:50 INFO] rotating to position U
[Status 07:16:51 INFO] .SET file for ACQ96 ready
[Ingest 07:16:51 INFO] Starting acquisition
[Status 07:16:51 INFO] reading housekeeping
[Status 07:17:08 INFO] acquire complete
[Status 07:17:09 INFO] writing housekeeping
[Sequencer 07:17:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:17:09 INFO] incremented U scene to 135 completed views
[Sequencer 07:17:09 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:17:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:17:09 INFO] incremented to [AERI set: name V135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:17:09 INFO] U135.SIG(18)
[sigmove 07:17:09 DEBUG] transformed U135Ma.SPC -> U135MA.SPC
[sigmove 07:17:09 DEBUG] transformed U135Mb.SPC -> U135MB.SPC
[sigmove 07:17:09 DEBUG] transformed U135Mc.SPC -> U135MC.SPC
[sigmove 07:17:09 DEBUG] transformed U135Md.SPC -> U135MD.SPC
[sigmove 07:17:09 DEBUG] transformed U135Me.SPC -> U135ME.SPC
[sigmove 07:17:09 DEBUG] transformed U135Mf.SPC -> U135MF.SPC
[Status 07:17:09 INFO] data for U135 transferred to science data processing
[Tidy 07:17:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:17:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:17:09 INFO] resetting WatchDogTimer
[Status 07:17:09 INFO] Starting Set [AERI set: name V135, 6 scans, 0 angle, D16300 command]
[Ingest 07:17:09 INFO] Sending XML status message
[Status 07:17:09 INFO] Mirror angle: 0
[Mirror 07:17:09 INFO] rotating to position V
[Status 07:17:10 INFO] .SET file for ACQ96 ready
[Ingest 07:17:10 INFO] Starting acquisition
[Status 07:17:10 INFO] reading housekeeping
[Status 07:17:28 INFO] acquire complete
[Status 07:17:28 INFO] writing housekeeping
[Sequencer 07:17:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:17:28 INFO] incremented V scene to 135 completed views
[Sequencer 07:17:28 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:17:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:17:28 INFO] incremented to [AERI set: name W135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:17:28 INFO] V135.SIG(18)
[sigmove 07:17:28 DEBUG] transformed V135Ma.SPC -> V135MA.SPC
[sigmove 07:17:28 DEBUG] transformed V135Mb.SPC -> V135MB.SPC
[sigmove 07:17:28 DEBUG] transformed V135Mc.SPC -> V135MC.SPC
[sigmove 07:17:28 DEBUG] transformed V135Md.SPC -> V135MD.SPC
[sigmove 07:17:28 DEBUG] transformed V135Me.SPC -> V135ME.SPC
[sigmove 07:17:28 DEBUG] transformed V135Mf.SPC -> V135MF.SPC
[Status 07:17:28 INFO] data for V135 transferred to science data processing
[Tidy 07:17:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:17:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:17:28 INFO] resetting WatchDogTimer
[Status 07:17:28 INFO] Starting Set [AERI set: name W135, 6 scans, 0 angle, D16300 command]
[Ingest 07:17:28 INFO] Sending XML status message
[Status 07:17:28 INFO] Mirror angle: 0
[Mirror 07:17:28 INFO] rotating to position W
[Status 07:17:29 INFO] .SET file for ACQ96 ready
[Ingest 07:17:29 INFO] Starting acquisition
[Status 07:17:29 INFO] reading housekeeping
[Status 07:17:47 INFO] acquire complete
[Status 07:17:47 INFO] writing housekeeping
[Sequencer 07:17:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:17:47 INFO] incremented W scene to 135 completed views
[Sequencer 07:17:47 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:17:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:17:47 INFO] incremented to [AERI set: name X135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:17:47 INFO] W135.SIG(18)
[sigmove 07:17:47 DEBUG] transformed W135Ma.SPC -> W135MA.SPC
[sigmove 07:17:47 DEBUG] transformed W135Mb.SPC -> W135MB.SPC
[sigmove 07:17:47 DEBUG] transformed W135Mc.SPC -> W135MC.SPC
[sigmove 07:17:47 DEBUG] transformed W135Md.SPC -> W135MD.SPC
[sigmove 07:17:47 DEBUG] transformed W135Me.SPC -> W135ME.SPC
[sigmove 07:17:47 DEBUG] transformed W135Mf.SPC -> W135MF.SPC
[Status 07:17:47 INFO] data for W135 transferred to science data processing
[Tidy 07:17:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:17:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:17:47 INFO] resetting WatchDogTimer
[Status 07:17:47 INFO] Starting Set [AERI set: name X135, 6 scans, 0 angle, D16300 command]
[Ingest 07:17:47 INFO] Sending XML status message
[Status 07:17:47 INFO] Mirror angle: 0
[Mirror 07:17:48 INFO] rotating to position X
[Status 07:17:48 INFO] .SET file for ACQ96 ready
[Ingest 07:17:48 INFO] Starting acquisition
[Status 07:17:48 INFO] reading housekeeping
[Status 07:18:06 INFO] acquire complete
[Status 07:18:06 INFO] writing housekeeping
[Sequencer 07:18:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:18:06 INFO] incremented X scene to 135 completed views
[Sequencer 07:18:06 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:18:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:18:06 INFO] incremented to [AERI set: name Y135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:18:06 INFO] X135.SIG(18)
[sigmove 07:18:06 DEBUG] transformed X135Ma.SPC -> X135MA.SPC
[sigmove 07:18:06 DEBUG] transformed X135Mb.SPC -> X135MB.SPC
[sigmove 07:18:06 DEBUG] transformed X135Mc.SPC -> X135MC.SPC
[sigmove 07:18:06 DEBUG] transformed X135Md.SPC -> X135MD.SPC
[sigmove 07:18:06 DEBUG] transformed X135Me.SPC -> X135ME.SPC
[sigmove 07:18:06 DEBUG] transformed X135Mf.SPC -> X135MF.SPC
[Status 07:18:06 INFO] data for X135 transferred to science data processing
[Tidy 07:18:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:18:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:18:06 INFO] resetting WatchDogTimer
[Status 07:18:06 INFO] Starting Set [AERI set: name Y135, 6 scans, 0 angle, D16300 command]
[Ingest 07:18:06 INFO] Sending XML status message
[Status 07:18:06 INFO] Mirror angle: 0
[Mirror 07:18:07 INFO] rotating to position Y
[Status 07:18:07 INFO] .SET file for ACQ96 ready
[Ingest 07:18:07 INFO] Starting acquisition
[Status 07:18:07 INFO] reading housekeeping
[Status 07:18:25 INFO] acquire complete
[Status 07:18:25 INFO] writing housekeeping
[Sequencer 07:18:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:18:25 INFO] incremented Y scene to 135 completed views
[Sequencer 07:18:25 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:18:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:18:25 INFO] incremented to [AERI set: name Z135, 6 scans, 0 angle, D16300 command] set
[sigmove 07:18:25 INFO] Y135.SIG(18)
[sigmove 07:18:25 DEBUG] transformed Y135Ma.SPC -> Y135MA.SPC
[sigmove 07:18:25 DEBUG] transformed Y135Mb.SPC -> Y135MB.SPC
[sigmove 07:18:25 DEBUG] transformed Y135Mc.SPC -> Y135MC.SPC
[sigmove 07:18:25 DEBUG] transformed Y135Md.SPC -> Y135MD.SPC
[sigmove 07:18:25 DEBUG] transformed Y135Me.SPC -> Y135ME.SPC
[sigmove 07:18:25 DEBUG] transformed Y135Mf.SPC -> Y135MF.SPC
[Status 07:18:25 INFO] data for Y135 transferred to science data processing
[Tidy 07:18:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:18:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:18:25 INFO] resetting WatchDogTimer
[Status 07:18:26 INFO] Starting Set [AERI set: name Z135, 6 scans, 0 angle, D16300 command]
[Ingest 07:18:26 INFO] Sending XML status message
[Status 07:18:26 INFO] Mirror angle: 0
[Mirror 07:18:26 INFO] rotating to position Z
[Status 07:18:26 INFO] .SET file for ACQ96 ready
[Ingest 07:18:26 INFO] Starting acquisition
[Status 07:18:26 INFO] reading housekeeping
[Status 07:18:44 INFO] acquire complete
[Status 07:18:44 INFO] writing housekeeping
[Sequencer 07:18:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:18:44 INFO] incremented Z scene to 135 completed views
[Sequencer 07:18:44 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:18:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:18:44 INFO] incremented to [AERI set: name A136, 6 scans, 120 angle, D28300 command] set
[sigmove 07:18:44 INFO] Z135.SIG(18)
[sigmove 07:18:44 DEBUG] transformed Z135Ma.SPC -> Z135MA.SPC
[sigmove 07:18:44 DEBUG] transformed Z135Mb.SPC -> Z135MB.SPC
[sigmove 07:18:44 DEBUG] transformed Z135Mc.SPC -> Z135MC.SPC
[sigmove 07:18:44 DEBUG] transformed Z135Md.SPC -> Z135MD.SPC
[sigmove 07:18:44 DEBUG] transformed Z135Me.SPC -> Z135ME.SPC
[sigmove 07:18:44 DEBUG] transformed Z135Mf.SPC -> Z135MF.SPC
[Status 07:18:44 INFO] data for Z135 transferred to science data processing
[Tidy 07:18:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:18:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:18:44 INFO] resetting WatchDogTimer
[Status 07:18:45 INFO] Starting Set [AERI set: name A136, 6 scans, 120 angle, D28300 command]
[Ingest 07:18:45 INFO] Sending XML status message
[Status 07:18:45 INFO] Mirror angle: 120
[Mirror 07:18:45 INFO] rotating to position A
[Status 07:18:46 INFO] .SET file for ACQ96 ready
[Ingest 07:18:46 INFO] Starting acquisition
[Status 07:18:47 INFO] reading housekeeping
[Status 07:19:04 INFO] acquire complete
[Status 07:19:05 INFO] writing housekeeping
[Sequencer 07:19:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:19:05 INFO] incremented A scene to 136 completed views
[Sequencer 07:19:05 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:19:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:19:05 INFO] incremented to [AERI set: name H136, 6 scans, 60 angle, D22500 command] set
[sigmove 07:19:05 INFO] A136.SIG(18)
[sigmove 07:19:05 DEBUG] transformed A136Ma.SPC -> A136MA.SPC
[sigmove 07:19:05 DEBUG] transformed A136Mb.SPC -> A136MB.SPC
[sigmove 07:19:05 DEBUG] transformed A136Mc.SPC -> A136MC.SPC
[sigmove 07:19:05 DEBUG] transformed A136Md.SPC -> A136MD.SPC
[sigmove 07:19:05 DEBUG] transformed A136Me.SPC -> A136ME.SPC
[sigmove 07:19:05 DEBUG] transformed A136Mf.SPC -> A136MF.SPC
[Status 07:19:05 INFO] data for A136 transferred to science data processing
[Tidy 07:19:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:19:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:19:05 INFO] resetting WatchDogTimer
[Status 07:19:05 INFO] Starting Set [AERI set: name H136, 6 scans, 60 angle, D22500 command]
[Ingest 07:19:05 INFO] Sending XML status message
[Status 07:19:05 INFO] Mirror angle: 60
[Mirror 07:19:05 INFO] rotating to position H
[Status 07:19:06 INFO] .SET file for ACQ96 ready
[Ingest 07:19:06 INFO] Starting acquisition
[Status 07:19:06 INFO] reading housekeeping
[Status 07:19:24 INFO] acquire complete
[Status 07:19:25 INFO] writing housekeeping
[Sequencer 07:19:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:19:25 INFO] incremented H scene to 136 completed views
[Sequencer 07:19:25 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:19:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:19:25 INFO] incremented to [AERI set: name S136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:19:25 INFO] H136.SIG(18)
[sigmove 07:19:25 DEBUG] transformed H136Ma.SPC -> H136MA.SPC
[sigmove 07:19:25 DEBUG] transformed H136Mb.SPC -> H136MB.SPC
[sigmove 07:19:25 DEBUG] transformed H136Mc.SPC -> H136MC.SPC
[sigmove 07:19:25 DEBUG] transformed H136Md.SPC -> H136MD.SPC
[sigmove 07:19:25 DEBUG] transformed H136Me.SPC -> H136ME.SPC
[sigmove 07:19:25 DEBUG] transformed H136Mf.SPC -> H136MF.SPC
[Status 07:19:25 INFO] data for H136 transferred to science data processing
[Tidy 07:19:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:19:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:19:25 INFO] resetting WatchDogTimer
[Status 07:19:25 INFO] Starting Set [AERI set: name S136, 6 scans, 0 angle, D16300 command]
[Ingest 07:19:25 INFO] Sending XML status message
[Status 07:19:25 INFO] Mirror angle: 0
[Mirror 07:19:25 INFO] rotating to position S
[Status 07:19:26 INFO] .SET file for ACQ96 ready
[Ingest 07:19:26 INFO] Starting acquisition
[Status 07:19:26 INFO] reading housekeeping
[Status 07:19:44 INFO] acquire complete
[Status 07:19:45 INFO] writing housekeeping
[Sequencer 07:19:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:19:45 INFO] incremented S scene to 136 completed views
[Sequencer 07:19:45 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:19:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:19:45 INFO] incremented to [AERI set: name T136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:19:45 INFO] S136.SIG(18)
[sigmove 07:19:45 DEBUG] transformed S136Ma.SPC -> S136MA.SPC
[sigmove 07:19:45 DEBUG] transformed S136Mb.SPC -> S136MB.SPC
[sigmove 07:19:45 DEBUG] transformed S136Mc.SPC -> S136MC.SPC
[sigmove 07:19:45 DEBUG] transformed S136Md.SPC -> S136MD.SPC
[sigmove 07:19:45 DEBUG] transformed S136Me.SPC -> S136ME.SPC
[sigmove 07:19:45 DEBUG] transformed S136Mf.SPC -> S136MF.SPC
[Status 07:19:45 INFO] data for S136 transferred to science data processing
[Tidy 07:19:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:19:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:19:45 INFO] resetting WatchDogTimer
[Status 07:19:45 INFO] Starting Set [AERI set: name T136, 6 scans, 0 angle, D16300 command]
[Ingest 07:19:45 INFO] Sending XML status message
[Status 07:19:45 INFO] Mirror angle: 0
[Mirror 07:19:45 INFO] rotating to position T
[Status 07:19:46 INFO] .SET file for ACQ96 ready
[Ingest 07:19:46 INFO] Starting acquisition
[Status 07:19:46 INFO] reading housekeeping
[Status 07:20:04 INFO] acquire complete
[Status 07:20:04 INFO] writing housekeeping
[Sequencer 07:20:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:20:04 INFO] incremented T scene to 136 completed views
[Sequencer 07:20:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:20:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:20:04 INFO] incremented to [AERI set: name U136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:20:04 INFO] T136.SIG(18)
[sigmove 07:20:04 DEBUG] transformed T136Ma.SPC -> T136MA.SPC
[sigmove 07:20:04 DEBUG] transformed T136Mb.SPC -> T136MB.SPC
[sigmove 07:20:04 DEBUG] transformed T136Mc.SPC -> T136MC.SPC
[sigmove 07:20:04 DEBUG] transformed T136Md.SPC -> T136MD.SPC
[sigmove 07:20:04 DEBUG] transformed T136Me.SPC -> T136ME.SPC
[sigmove 07:20:04 DEBUG] transformed T136Mf.SPC -> T136MF.SPC
[Status 07:20:04 INFO] data for T136 transferred to science data processing
[Tidy 07:20:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:20:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:20:04 INFO] resetting WatchDogTimer
[Status 07:20:04 INFO] Starting Set [AERI set: name U136, 6 scans, 0 angle, D16300 command]
[Ingest 07:20:04 INFO] Sending XML status message
[Status 07:20:04 INFO] Mirror angle: 0
[Mirror 07:20:04 INFO] rotating to position U
[Status 07:20:05 INFO] .SET file for ACQ96 ready
[Ingest 07:20:05 INFO] Starting acquisition
[Status 07:20:05 INFO] reading housekeeping
[Status 07:20:23 INFO] acquire complete
[Status 07:20:23 INFO] writing housekeeping
[Sequencer 07:20:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:20:23 INFO] incremented U scene to 136 completed views
[Sequencer 07:20:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:20:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:20:23 INFO] incremented to [AERI set: name V136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:20:23 INFO] U136.SIG(18)
[sigmove 07:20:23 DEBUG] transformed U136Ma.SPC -> U136MA.SPC
[sigmove 07:20:23 DEBUG] transformed U136Mb.SPC -> U136MB.SPC
[sigmove 07:20:23 DEBUG] transformed U136Mc.SPC -> U136MC.SPC
[sigmove 07:20:23 DEBUG] transformed U136Md.SPC -> U136MD.SPC
[sigmove 07:20:23 DEBUG] transformed U136Me.SPC -> U136ME.SPC
[sigmove 07:20:23 DEBUG] transformed U136Mf.SPC -> U136MF.SPC
[Status 07:20:23 INFO] data for U136 transferred to science data processing
[Tidy 07:20:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:20:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:20:23 INFO] resetting WatchDogTimer
[Status 07:20:23 INFO] Starting Set [AERI set: name V136, 6 scans, 0 angle, D16300 command]
[Ingest 07:20:23 INFO] Sending XML status message
[Status 07:20:23 INFO] Mirror angle: 0
[Mirror 07:20:24 INFO] rotating to position V
[Status 07:20:24 INFO] .SET file for ACQ96 ready
[Ingest 07:20:24 INFO] Starting acquisition
[Status 07:20:24 INFO] reading housekeeping
[Status 07:20:42 INFO] acquire complete
[Status 07:20:42 INFO] writing housekeeping
[Sequencer 07:20:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:20:42 INFO] incremented V scene to 136 completed views
[Sequencer 07:20:42 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:20:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:20:42 INFO] incremented to [AERI set: name W136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:20:42 INFO] V136.SIG(18)
[sigmove 07:20:42 DEBUG] transformed V136Ma.SPC -> V136MA.SPC
[sigmove 07:20:42 DEBUG] transformed V136Mb.SPC -> V136MB.SPC
[sigmove 07:20:42 DEBUG] transformed V136Mc.SPC -> V136MC.SPC
[sigmove 07:20:42 DEBUG] transformed V136Md.SPC -> V136MD.SPC
[sigmove 07:20:42 DEBUG] transformed V136Me.SPC -> V136ME.SPC
[sigmove 07:20:42 DEBUG] transformed V136Mf.SPC -> V136MF.SPC
[Status 07:20:42 INFO] data for V136 transferred to science data processing
[Tidy 07:20:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:20:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:20:42 INFO] resetting WatchDogTimer
[Status 07:20:42 INFO] Starting Set [AERI set: name W136, 6 scans, 0 angle, D16300 command]
[Ingest 07:20:42 INFO] Sending XML status message
[Status 07:20:42 INFO] Mirror angle: 0
[Mirror 07:20:43 INFO] rotating to position W
[Status 07:20:43 INFO] .SET file for ACQ96 ready
[Ingest 07:20:43 INFO] Starting acquisition
[Status 07:20:43 INFO] reading housekeeping
[Status 07:21:01 INFO] acquire complete
[Status 07:21:01 INFO] writing housekeeping
[Sequencer 07:21:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:21:01 INFO] incremented W scene to 136 completed views
[Sequencer 07:21:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:21:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:21:01 INFO] incremented to [AERI set: name X136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:21:01 INFO] W136.SIG(18)
[sigmove 07:21:01 DEBUG] transformed W136Ma.SPC -> W136MA.SPC
[sigmove 07:21:01 DEBUG] transformed W136Mb.SPC -> W136MB.SPC
[sigmove 07:21:01 DEBUG] transformed W136Mc.SPC -> W136MC.SPC
[sigmove 07:21:01 DEBUG] transformed W136Md.SPC -> W136MD.SPC
[sigmove 07:21:01 DEBUG] transformed W136Me.SPC -> W136ME.SPC
[sigmove 07:21:01 DEBUG] transformed W136Mf.SPC -> W136MF.SPC
[Status 07:21:01 INFO] data for W136 transferred to science data processing
[Tidy 07:21:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:21:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:21:01 INFO] resetting WatchDogTimer
[Status 07:21:02 INFO] Starting Set [AERI set: name X136, 6 scans, 0 angle, D16300 command]
[Ingest 07:21:02 INFO] Sending XML status message
[Status 07:21:02 INFO] Mirror angle: 0
[Mirror 07:21:02 INFO] rotating to position X
[Status 07:21:02 INFO] .SET file for ACQ96 ready
[Ingest 07:21:02 INFO] Starting acquisition
[Status 07:21:02 INFO] reading housekeeping
[Status 07:21:20 INFO] acquire complete
[Status 07:21:20 INFO] writing housekeeping
[Sequencer 07:21:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:21:20 INFO] incremented X scene to 136 completed views
[Sequencer 07:21:20 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:21:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:21:20 INFO] incremented to [AERI set: name Y136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:21:20 INFO] X136.SIG(18)
[sigmove 07:21:20 DEBUG] transformed X136Ma.SPC -> X136MA.SPC
[sigmove 07:21:20 DEBUG] transformed X136Mb.SPC -> X136MB.SPC
[sigmove 07:21:20 DEBUG] transformed X136Mc.SPC -> X136MC.SPC
[sigmove 07:21:20 DEBUG] transformed X136Md.SPC -> X136MD.SPC
[sigmove 07:21:20 DEBUG] transformed X136Me.SPC -> X136ME.SPC
[sigmove 07:21:20 DEBUG] transformed X136Mf.SPC -> X136MF.SPC
[Status 07:21:20 INFO] data for X136 transferred to science data processing
[Tidy 07:21:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:21:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:21:20 INFO] resetting WatchDogTimer
[Status 07:21:21 INFO] Starting Set [AERI set: name Y136, 6 scans, 0 angle, D16300 command]
[Ingest 07:21:21 INFO] Sending XML status message
[Status 07:21:21 INFO] Mirror angle: 0
[Mirror 07:21:21 INFO] rotating to position Y
[Status 07:21:21 INFO] .SET file for ACQ96 ready
[Ingest 07:21:21 INFO] Starting acquisition
[Status 07:21:21 INFO] reading housekeeping
[Status 07:21:39 INFO] acquire complete
[Status 07:21:40 INFO] writing housekeeping
[Sequencer 07:21:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:21:40 INFO] incremented Y scene to 136 completed views
[Sequencer 07:21:40 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:21:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:21:40 INFO] incremented to [AERI set: name Z136, 6 scans, 0 angle, D16300 command] set
[sigmove 07:21:40 INFO] Y136.SIG(18)
[sigmove 07:21:40 DEBUG] transformed Y136Ma.SPC -> Y136MA.SPC
[sigmove 07:21:40 DEBUG] transformed Y136Mb.SPC -> Y136MB.SPC
[sigmove 07:21:40 DEBUG] transformed Y136Mc.SPC -> Y136MC.SPC
[sigmove 07:21:40 DEBUG] transformed Y136Md.SPC -> Y136MD.SPC
[sigmove 07:21:40 DEBUG] transformed Y136Me.SPC -> Y136ME.SPC
[sigmove 07:21:40 DEBUG] transformed Y136Mf.SPC -> Y136MF.SPC
[Status 07:21:40 INFO] data for Y136 transferred to science data processing
[Tidy 07:21:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:21:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:21:40 INFO] resetting WatchDogTimer
[Status 07:21:40 INFO] Starting Set [AERI set: name Z136, 6 scans, 0 angle, D16300 command]
[Ingest 07:21:40 INFO] Sending XML status message
[Status 07:21:40 INFO] Mirror angle: 0
[Mirror 07:21:40 INFO] rotating to position Z
[Status 07:21:40 INFO] .SET file for ACQ96 ready
[Ingest 07:21:40 INFO] Starting acquisition
[Status 07:21:41 INFO] reading housekeeping
[Status 07:21:58 INFO] acquire complete
[Status 07:21:59 INFO] writing housekeeping
[Sequencer 07:21:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:21:59 INFO] incremented Z scene to 136 completed views
[Sequencer 07:21:59 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:21:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:21:59 INFO] incremented to [AERI set: name H137, 6 scans, 60 angle, D22500 command] set
[sigmove 07:21:59 INFO] Z136.SIG(18)
[sigmove 07:21:59 DEBUG] transformed Z136Ma.SPC -> Z136MA.SPC
[sigmove 07:21:59 DEBUG] transformed Z136Mb.SPC -> Z136MB.SPC
[sigmove 07:21:59 DEBUG] transformed Z136Mc.SPC -> Z136MC.SPC
[sigmove 07:21:59 DEBUG] transformed Z136Md.SPC -> Z136MD.SPC
[sigmove 07:21:59 DEBUG] transformed Z136Me.SPC -> Z136ME.SPC
[sigmove 07:21:59 DEBUG] transformed Z136Mf.SPC -> Z136MF.SPC
[Status 07:21:59 INFO] data for Z136 transferred to science data processing
[Tidy 07:21:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:21:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:21:59 INFO] resetting WatchDogTimer
[Status 07:21:59 INFO] Starting Set [AERI set: name H137, 6 scans, 60 angle, D22500 command]
[Ingest 07:21:59 INFO] Sending XML status message
[Status 07:21:59 INFO] Mirror angle: 60
[Mirror 07:21:59 INFO] rotating to position H
[Status 07:22:00 INFO] .SET file for ACQ96 ready
[Ingest 07:22:00 INFO] Starting acquisition
[Status 07:22:00 INFO] reading housekeeping
[Status 07:22:18 INFO] acquire complete
[Status 07:22:20 INFO] writing housekeeping
[Sequencer 07:22:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:22:20 INFO] incremented H scene to 137 completed views
[Sequencer 07:22:20 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:22:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:22:20 INFO] incremented to [AERI set: name A137, 6 scans, 120 angle, D28300 command] set
[sigmove 07:22:20 INFO] H137.SIG(18)
[sigmove 07:22:20 DEBUG] transformed H137Ma.SPC -> H137MA.SPC
[sigmove 07:22:20 DEBUG] transformed H137Mb.SPC -> H137MB.SPC
[sigmove 07:22:20 DEBUG] transformed H137Mc.SPC -> H137MC.SPC
[sigmove 07:22:20 DEBUG] transformed H137Md.SPC -> H137MD.SPC
[sigmove 07:22:20 DEBUG] transformed H137Me.SPC -> H137ME.SPC
[sigmove 07:22:20 DEBUG] transformed H137Mf.SPC -> H137MF.SPC
[Status 07:22:20 INFO] data for H137 transferred to science data processing
[Tidy 07:22:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:22:20 INFO] A135.FIN(19),H135.FIN(19),S135.FIN(19),T135.FIN(19),U135.FIN(19),V135.FIN(19),W135.FIN(19),X135.FIN(19),Y135.FIN(19),Z135.FIN(19),A136.FIN(19),H136.FIN(19),S136.FIN(19),T136.FIN(19),U136.FIN(19),V136.FIN(19),W136.FIN(19),X136.FIN(19),Y136.FIN(19),Z136.FIN(19)
[sigmove 07:22:20 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:22:20 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:22:23 DEBUG] done zipping
[WatchDog 07:22:23 INFO] resetting WatchDogTimer
[Status 07:22:23 INFO] Starting Set [AERI set: name A137, 6 scans, 120 angle, D28300 command]
[Ingest 07:22:23 INFO] Sending XML status message
[Status 07:22:23 INFO] Mirror angle: 120
[Mirror 07:22:23 INFO] rotating to position A
[Status 07:22:24 INFO] .SET file for ACQ96 ready
[Ingest 07:22:24 INFO] Starting acquisition
[Status 07:22:24 INFO] reading housekeeping
[Status 07:22:42 INFO] acquire complete
[Status 07:22:42 INFO] writing housekeeping
[Sequencer 07:22:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:22:42 INFO] incremented A scene to 137 completed views
[Sequencer 07:22:42 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:22:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:22:42 INFO] incremented to [AERI set: name S137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:22:42 INFO] A137.SIG(18)
[sigmove 07:22:42 DEBUG] transformed A137Ma.SPC -> A137MA.SPC
[sigmove 07:22:42 DEBUG] transformed A137Mb.SPC -> A137MB.SPC
[sigmove 07:22:42 DEBUG] transformed A137Mc.SPC -> A137MC.SPC
[sigmove 07:22:42 DEBUG] transformed A137Md.SPC -> A137MD.SPC
[sigmove 07:22:42 DEBUG] transformed A137Me.SPC -> A137ME.SPC
[sigmove 07:22:42 DEBUG] transformed A137Mf.SPC -> A137MF.SPC
[Status 07:22:42 INFO] data for A137 transferred to science data processing
[Tidy 07:22:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:22:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:22:42 INFO] resetting WatchDogTimer
[Status 07:22:43 INFO] Starting Set [AERI set: name S137, 6 scans, 0 angle, D16300 command]
[Ingest 07:22:43 INFO] Sending XML status message
[Status 07:22:43 INFO] Mirror angle: 0
[Mirror 07:22:43 INFO] rotating to position S
[Status 07:22:44 INFO] .SET file for ACQ96 ready
[Ingest 07:22:44 INFO] Starting acquisition
[Status 07:22:44 INFO] reading housekeeping
[Status 07:23:02 INFO] acquire complete
[Status 07:23:03 INFO] writing housekeeping
[Sequencer 07:23:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:23:03 INFO] incremented S scene to 137 completed views
[Sequencer 07:23:03 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:23:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:23:03 INFO] incremented to [AERI set: name T137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:23:03 INFO] S137.SIG(18)
[sigmove 07:23:03 DEBUG] transformed S137Ma.SPC -> S137MA.SPC
[sigmove 07:23:03 DEBUG] transformed S137Mb.SPC -> S137MB.SPC
[sigmove 07:23:03 DEBUG] transformed S137Mc.SPC -> S137MC.SPC
[sigmove 07:23:03 DEBUG] transformed S137Md.SPC -> S137MD.SPC
[sigmove 07:23:03 DEBUG] transformed S137Me.SPC -> S137ME.SPC
[sigmove 07:23:03 DEBUG] transformed S137Mf.SPC -> S137MF.SPC
[Status 07:23:03 INFO] data for S137 transferred to science data processing
[Tidy 07:23:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:23:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:23:03 INFO] resetting WatchDogTimer
[Status 07:23:03 INFO] Starting Set [AERI set: name T137, 6 scans, 0 angle, D16300 command]
[Ingest 07:23:03 INFO] Sending XML status message
[Status 07:23:03 INFO] Mirror angle: 0
[Mirror 07:23:03 INFO] rotating to position T
[Status 07:23:03 INFO] .SET file for ACQ96 ready
[Ingest 07:23:03 INFO] Starting acquisition
[Status 07:23:04 INFO] reading housekeeping
[Status 07:23:21 INFO] acquire complete
[Status 07:23:22 INFO] writing housekeeping
[Sequencer 07:23:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:23:22 INFO] incremented T scene to 137 completed views
[Sequencer 07:23:22 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:23:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:23:22 INFO] incremented to [AERI set: name U137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:23:22 INFO] T137.SIG(18)
[sigmove 07:23:22 DEBUG] transformed T137Ma.SPC -> T137MA.SPC
[sigmove 07:23:22 DEBUG] transformed T137Mb.SPC -> T137MB.SPC
[sigmove 07:23:22 DEBUG] transformed T137Mc.SPC -> T137MC.SPC
[sigmove 07:23:22 DEBUG] transformed T137Md.SPC -> T137MD.SPC
[sigmove 07:23:22 DEBUG] transformed T137Me.SPC -> T137ME.SPC
[sigmove 07:23:22 DEBUG] transformed T137Mf.SPC -> T137MF.SPC
[Status 07:23:22 INFO] data for T137 transferred to science data processing
[Tidy 07:23:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:23:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:23:22 INFO] resetting WatchDogTimer
[Status 07:23:22 INFO] Starting Set [AERI set: name U137, 6 scans, 0 angle, D16300 command]
[Ingest 07:23:22 INFO] Sending XML status message
[Status 07:23:22 INFO] Mirror angle: 0
[Mirror 07:23:22 INFO] rotating to position U
[Status 07:23:22 INFO] .SET file for ACQ96 ready
[Ingest 07:23:22 INFO] Starting acquisition
[Status 07:23:23 INFO] reading housekeeping
[Status 07:23:40 INFO] acquire complete
[Status 07:23:41 INFO] writing housekeeping
[Sequencer 07:23:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:23:41 INFO] incremented U scene to 137 completed views
[Sequencer 07:23:41 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:23:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:23:41 INFO] incremented to [AERI set: name V137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:23:41 INFO] U137.SIG(18)
[sigmove 07:23:41 DEBUG] transformed U137Ma.SPC -> U137MA.SPC
[sigmove 07:23:41 DEBUG] transformed U137Mb.SPC -> U137MB.SPC
[sigmove 07:23:41 DEBUG] transformed U137Mc.SPC -> U137MC.SPC
[sigmove 07:23:41 DEBUG] transformed U137Md.SPC -> U137MD.SPC
[sigmove 07:23:41 DEBUG] transformed U137Me.SPC -> U137ME.SPC
[sigmove 07:23:41 DEBUG] transformed U137Mf.SPC -> U137MF.SPC
[Status 07:23:41 INFO] data for U137 transferred to science data processing
[Tidy 07:23:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:23:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:23:41 INFO] resetting WatchDogTimer
[Status 07:23:41 INFO] Starting Set [AERI set: name V137, 6 scans, 0 angle, D16300 command]
[Ingest 07:23:41 INFO] Sending XML status message
[Status 07:23:41 INFO] Mirror angle: 0
[Mirror 07:23:41 INFO] rotating to position V
[Status 07:23:41 INFO] .SET file for ACQ96 ready
[Ingest 07:23:42 INFO] Starting acquisition
[Status 07:23:42 INFO] reading housekeeping
[Status 07:23:59 INFO] acquire complete
[Status 07:24:00 INFO] writing housekeeping
[Sequencer 07:24:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:24:00 INFO] incremented V scene to 137 completed views
[Sequencer 07:24:00 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:24:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:24:00 INFO] incremented to [AERI set: name W137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:24:00 INFO] V137.SIG(18)
[sigmove 07:24:00 DEBUG] transformed V137Ma.SPC -> V137MA.SPC
[sigmove 07:24:00 DEBUG] transformed V137Mb.SPC -> V137MB.SPC
[sigmove 07:24:00 DEBUG] transformed V137Mc.SPC -> V137MC.SPC
[sigmove 07:24:00 DEBUG] transformed V137Md.SPC -> V137MD.SPC
[sigmove 07:24:00 DEBUG] transformed V137Me.SPC -> V137ME.SPC
[sigmove 07:24:00 DEBUG] transformed V137Mf.SPC -> V137MF.SPC
[Status 07:24:00 INFO] data for V137 transferred to science data processing
[Tidy 07:24:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:24:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:24:00 INFO] resetting WatchDogTimer
[Status 07:24:00 INFO] Starting Set [AERI set: name W137, 6 scans, 0 angle, D16300 command]
[Ingest 07:24:00 INFO] Sending XML status message
[Status 07:24:00 INFO] Mirror angle: 0
[Mirror 07:24:00 INFO] rotating to position W
[Status 07:24:00 INFO] .SET file for ACQ96 ready
[Ingest 07:24:01 INFO] Starting acquisition
[Status 07:24:01 INFO] reading housekeeping
[Status 07:24:18 INFO] acquire complete
[Status 07:24:19 INFO] writing housekeeping
[Sequencer 07:24:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:24:19 INFO] incremented W scene to 137 completed views
[Sequencer 07:24:19 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:24:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:24:19 INFO] incremented to [AERI set: name X137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:24:19 INFO] W137.SIG(18)
[sigmove 07:24:19 DEBUG] transformed W137Ma.SPC -> W137MA.SPC
[sigmove 07:24:19 DEBUG] transformed W137Mb.SPC -> W137MB.SPC
[sigmove 07:24:19 DEBUG] transformed W137Mc.SPC -> W137MC.SPC
[sigmove 07:24:19 DEBUG] transformed W137Md.SPC -> W137MD.SPC
[sigmove 07:24:19 DEBUG] transformed W137Me.SPC -> W137ME.SPC
[sigmove 07:24:19 DEBUG] transformed W137Mf.SPC -> W137MF.SPC
[Status 07:24:19 INFO] data for W137 transferred to science data processing
[Tidy 07:24:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:24:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:24:19 INFO] resetting WatchDogTimer
[Status 07:24:19 INFO] Starting Set [AERI set: name X137, 6 scans, 0 angle, D16300 command]
[Ingest 07:24:19 INFO] Sending XML status message
[Status 07:24:19 INFO] Mirror angle: 0
[Mirror 07:24:19 INFO] rotating to position X
[Status 07:24:20 INFO] .SET file for ACQ96 ready
[Ingest 07:24:20 INFO] Starting acquisition
[Status 07:24:20 INFO] reading housekeeping
[Status 07:24:37 INFO] acquire complete
[Status 07:24:38 INFO] writing housekeeping
[Sequencer 07:24:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:24:38 INFO] incremented X scene to 137 completed views
[Sequencer 07:24:38 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:24:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:24:38 INFO] incremented to [AERI set: name Y137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:24:38 INFO] X137.SIG(18)
[sigmove 07:24:38 DEBUG] transformed X137Ma.SPC -> X137MA.SPC
[sigmove 07:24:38 DEBUG] transformed X137Mb.SPC -> X137MB.SPC
[sigmove 07:24:38 DEBUG] transformed X137Mc.SPC -> X137MC.SPC
[sigmove 07:24:38 DEBUG] transformed X137Md.SPC -> X137MD.SPC
[sigmove 07:24:38 DEBUG] transformed X137Me.SPC -> X137ME.SPC
[sigmove 07:24:38 DEBUG] transformed X137Mf.SPC -> X137MF.SPC
[Status 07:24:38 INFO] data for X137 transferred to science data processing
[Tidy 07:24:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:24:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:24:38 INFO] resetting WatchDogTimer
[Status 07:24:38 INFO] Starting Set [AERI set: name Y137, 6 scans, 0 angle, D16300 command]
[Ingest 07:24:38 INFO] Sending XML status message
[Status 07:24:38 INFO] Mirror angle: 0
[Mirror 07:24:38 INFO] rotating to position Y
[Status 07:24:39 INFO] .SET file for ACQ96 ready
[Ingest 07:24:39 INFO] Starting acquisition
[Status 07:24:39 INFO] reading housekeeping
[Status 07:24:56 INFO] acquire complete
[Status 07:24:57 INFO] writing housekeeping
[Sequencer 07:24:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:24:57 INFO] incremented Y scene to 137 completed views
[Sequencer 07:24:57 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:24:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:24:57 INFO] incremented to [AERI set: name Z137, 6 scans, 0 angle, D16300 command] set
[sigmove 07:24:57 INFO] Y137.SIG(18)
[sigmove 07:24:57 DEBUG] transformed Y137Ma.SPC -> Y137MA.SPC
[sigmove 07:24:57 DEBUG] transformed Y137Mb.SPC -> Y137MB.SPC
[sigmove 07:24:57 DEBUG] transformed Y137Mc.SPC -> Y137MC.SPC
[sigmove 07:24:57 DEBUG] transformed Y137Md.SPC -> Y137MD.SPC
[sigmove 07:24:57 DEBUG] transformed Y137Me.SPC -> Y137ME.SPC
[sigmove 07:24:57 DEBUG] transformed Y137Mf.SPC -> Y137MF.SPC
[Status 07:24:57 INFO] data for Y137 transferred to science data processing
[Tidy 07:24:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:24:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:24:57 INFO] resetting WatchDogTimer
[Status 07:24:57 INFO] Starting Set [AERI set: name Z137, 6 scans, 0 angle, D16300 command]
[Ingest 07:24:57 INFO] Sending XML status message
[Status 07:24:57 INFO] Mirror angle: 0
[Mirror 07:24:57 INFO] rotating to position Z
[Status 07:24:58 INFO] .SET file for ACQ96 ready
[Ingest 07:24:58 INFO] Starting acquisition
[Status 07:24:58 INFO] reading housekeeping
[Status 07:25:16 INFO] acquire complete
[Status 07:25:16 INFO] writing housekeeping
[Sequencer 07:25:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:25:16 INFO] incremented Z scene to 137 completed views
[Sequencer 07:25:16 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:25:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:25:16 INFO] incremented to [AERI set: name A138, 6 scans, 120 angle, D28300 command] set
[sigmove 07:25:16 INFO] Z137.SIG(18)
[sigmove 07:25:16 DEBUG] transformed Z137Ma.SPC -> Z137MA.SPC
[sigmove 07:25:16 DEBUG] transformed Z137Mb.SPC -> Z137MB.SPC
[sigmove 07:25:16 DEBUG] transformed Z137Mc.SPC -> Z137MC.SPC
[sigmove 07:25:16 DEBUG] transformed Z137Md.SPC -> Z137MD.SPC
[sigmove 07:25:16 DEBUG] transformed Z137Me.SPC -> Z137ME.SPC
[sigmove 07:25:16 DEBUG] transformed Z137Mf.SPC -> Z137MF.SPC
[Status 07:25:16 INFO] data for Z137 transferred to science data processing
[Tidy 07:25:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:25:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:25:16 INFO] resetting WatchDogTimer
[Status 07:25:16 INFO] Starting Set [AERI set: name A138, 6 scans, 120 angle, D28300 command]
[Ingest 07:25:16 INFO] Sending XML status message
[Status 07:25:16 INFO] Mirror angle: 120
[Mirror 07:25:17 INFO] rotating to position A
[Status 07:25:18 INFO] .SET file for ACQ96 ready
[Ingest 07:25:18 INFO] Starting acquisition
[Status 07:25:18 INFO] reading housekeeping
[Status 07:25:36 INFO] acquire complete
[Status 07:25:36 INFO] writing housekeeping
[Sequencer 07:25:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:25:36 INFO] incremented A scene to 138 completed views
[Sequencer 07:25:36 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:25:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:25:36 INFO] incremented to [AERI set: name H138, 6 scans, 60 angle, D22500 command] set
[sigmove 07:25:36 INFO] A138.SIG(18)
[sigmove 07:25:36 DEBUG] transformed A138Ma.SPC -> A138MA.SPC
[sigmove 07:25:36 DEBUG] transformed A138Mb.SPC -> A138MB.SPC
[sigmove 07:25:36 DEBUG] transformed A138Mc.SPC -> A138MC.SPC
[sigmove 07:25:36 DEBUG] transformed A138Md.SPC -> A138MD.SPC
[sigmove 07:25:36 DEBUG] transformed A138Me.SPC -> A138ME.SPC
[sigmove 07:25:36 DEBUG] transformed A138Mf.SPC -> A138MF.SPC
[Status 07:25:36 INFO] data for A138 transferred to science data processing
[Tidy 07:25:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:25:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:25:36 INFO] resetting WatchDogTimer
[Status 07:25:37 INFO] Starting Set [AERI set: name H138, 6 scans, 60 angle, D22500 command]
[Ingest 07:25:37 INFO] Sending XML status message
[Status 07:25:37 INFO] Mirror angle: 60
[Mirror 07:25:37 INFO] rotating to position H
[Status 07:25:38 INFO] .SET file for ACQ96 ready
[Ingest 07:25:38 INFO] Starting acquisition
[Status 07:25:38 INFO] reading housekeeping
[Status 07:25:56 INFO] acquire complete
[Status 07:25:57 INFO] writing housekeeping
[Sequencer 07:25:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:25:57 INFO] incremented H scene to 138 completed views
[Sequencer 07:25:57 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:25:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:25:57 INFO] incremented to [AERI set: name S138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:25:57 INFO] H138.SIG(18)
[sigmove 07:25:57 DEBUG] transformed H138Ma.SPC -> H138MA.SPC
[sigmove 07:25:57 DEBUG] transformed H138Mb.SPC -> H138MB.SPC
[sigmove 07:25:57 DEBUG] transformed H138Mc.SPC -> H138MC.SPC
[sigmove 07:25:57 DEBUG] transformed H138Md.SPC -> H138MD.SPC
[sigmove 07:25:57 DEBUG] transformed H138Me.SPC -> H138ME.SPC
[sigmove 07:25:57 DEBUG] transformed H138Mf.SPC -> H138MF.SPC
[Status 07:25:57 INFO] data for H138 transferred to science data processing
[Tidy 07:25:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:25:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:25:57 INFO] resetting WatchDogTimer
[Status 07:25:57 INFO] Starting Set [AERI set: name S138, 6 scans, 0 angle, D16300 command]
[Ingest 07:25:57 INFO] Sending XML status message
[Status 07:25:57 INFO] Mirror angle: 0
[Mirror 07:25:57 INFO] rotating to position S
[Status 07:25:58 INFO] .SET file for ACQ96 ready
[Ingest 07:25:58 INFO] Starting acquisition
[Status 07:25:58 INFO] reading housekeeping
[Status 07:26:16 INFO] acquire complete
[Status 07:26:17 INFO] writing housekeeping
[Sequencer 07:26:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:26:17 INFO] incremented S scene to 138 completed views
[Sequencer 07:26:17 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:26:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:26:17 INFO] incremented to [AERI set: name T138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:26:17 INFO] S138.SIG(18)
[sigmove 07:26:17 DEBUG] transformed S138Ma.SPC -> S138MA.SPC
[sigmove 07:26:17 DEBUG] transformed S138Mb.SPC -> S138MB.SPC
[sigmove 07:26:17 DEBUG] transformed S138Mc.SPC -> S138MC.SPC
[sigmove 07:26:17 DEBUG] transformed S138Md.SPC -> S138MD.SPC
[sigmove 07:26:17 DEBUG] transformed S138Me.SPC -> S138ME.SPC
[sigmove 07:26:17 DEBUG] transformed S138Mf.SPC -> S138MF.SPC
[Status 07:26:17 INFO] data for S138 transferred to science data processing
[Tidy 07:26:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:26:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:26:17 INFO] resetting WatchDogTimer
[Status 07:26:17 INFO] Starting Set [AERI set: name T138, 6 scans, 0 angle, D16300 command]
[Ingest 07:26:17 INFO] Sending XML status message
[Status 07:26:17 INFO] Mirror angle: 0
[Mirror 07:26:17 INFO] rotating to position T
[Status 07:26:17 INFO] .SET file for ACQ96 ready
[Ingest 07:26:18 INFO] Starting acquisition
[Status 07:26:18 INFO] reading housekeeping
[Status 07:26:35 INFO] acquire complete
[Status 07:26:36 INFO] writing housekeeping
[Sequencer 07:26:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:26:36 INFO] incremented T scene to 138 completed views
[Sequencer 07:26:36 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:26:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:26:36 INFO] incremented to [AERI set: name U138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:26:36 INFO] T138.SIG(18)
[sigmove 07:26:36 DEBUG] transformed T138Ma.SPC -> T138MA.SPC
[sigmove 07:26:36 DEBUG] transformed T138Mb.SPC -> T138MB.SPC
[sigmove 07:26:36 DEBUG] transformed T138Mc.SPC -> T138MC.SPC
[sigmove 07:26:36 DEBUG] transformed T138Md.SPC -> T138MD.SPC
[sigmove 07:26:36 DEBUG] transformed T138Me.SPC -> T138ME.SPC
[sigmove 07:26:36 DEBUG] transformed T138Mf.SPC -> T138MF.SPC
[Status 07:26:36 INFO] data for T138 transferred to science data processing
[Tidy 07:26:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:26:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:26:36 INFO] resetting WatchDogTimer
[Status 07:26:36 INFO] Starting Set [AERI set: name U138, 6 scans, 0 angle, D16300 command]
[Ingest 07:26:36 INFO] Sending XML status message
[Status 07:26:36 INFO] Mirror angle: 0
[Mirror 07:26:36 INFO] rotating to position U
[Status 07:26:36 INFO] .SET file for ACQ96 ready
[Ingest 07:26:37 INFO] Starting acquisition
[Status 07:26:37 INFO] reading housekeeping
[Status 07:26:54 INFO] acquire complete
[Status 07:26:55 INFO] writing housekeeping
[Sequencer 07:26:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:26:55 INFO] incremented U scene to 138 completed views
[Sequencer 07:26:55 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:26:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:26:55 INFO] incremented to [AERI set: name V138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:26:55 INFO] U138.SIG(18)
[sigmove 07:26:55 DEBUG] transformed U138Ma.SPC -> U138MA.SPC
[sigmove 07:26:55 DEBUG] transformed U138Mb.SPC -> U138MB.SPC
[sigmove 07:26:55 DEBUG] transformed U138Mc.SPC -> U138MC.SPC
[sigmove 07:26:55 DEBUG] transformed U138Md.SPC -> U138MD.SPC
[sigmove 07:26:55 DEBUG] transformed U138Me.SPC -> U138ME.SPC
[sigmove 07:26:55 DEBUG] transformed U138Mf.SPC -> U138MF.SPC
[Status 07:26:55 INFO] data for U138 transferred to science data processing
[Tidy 07:26:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:26:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:26:55 INFO] resetting WatchDogTimer
[Status 07:26:55 INFO] Starting Set [AERI set: name V138, 6 scans, 0 angle, D16300 command]
[Ingest 07:26:55 INFO] Sending XML status message
[Status 07:26:55 INFO] Mirror angle: 0
[Mirror 07:26:55 INFO] rotating to position V
[Status 07:26:56 INFO] .SET file for ACQ96 ready
[Ingest 07:26:56 INFO] Starting acquisition
[Status 07:26:56 INFO] reading housekeeping
[Status 07:27:13 INFO] acquire complete
[Status 07:27:14 INFO] writing housekeeping
[Sequencer 07:27:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:27:14 INFO] incremented V scene to 138 completed views
[Sequencer 07:27:14 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:27:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:27:14 INFO] incremented to [AERI set: name W138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:27:14 INFO] V138.SIG(18)
[sigmove 07:27:14 DEBUG] transformed V138Ma.SPC -> V138MA.SPC
[sigmove 07:27:14 DEBUG] transformed V138Mb.SPC -> V138MB.SPC
[sigmove 07:27:14 DEBUG] transformed V138Mc.SPC -> V138MC.SPC
[sigmove 07:27:14 DEBUG] transformed V138Md.SPC -> V138MD.SPC
[sigmove 07:27:14 DEBUG] transformed V138Me.SPC -> V138ME.SPC
[sigmove 07:27:14 DEBUG] transformed V138Mf.SPC -> V138MF.SPC
[Status 07:27:14 INFO] data for V138 transferred to science data processing
[Tidy 07:27:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:27:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:27:14 INFO] resetting WatchDogTimer
[Status 07:27:14 INFO] Starting Set [AERI set: name W138, 6 scans, 0 angle, D16300 command]
[Ingest 07:27:14 INFO] Sending XML status message
[Status 07:27:14 INFO] Mirror angle: 0
[Mirror 07:27:14 INFO] rotating to position W
[Status 07:27:15 INFO] .SET file for ACQ96 ready
[Ingest 07:27:15 INFO] Starting acquisition
[Status 07:27:15 INFO] reading housekeeping
[Status 07:27:32 INFO] acquire complete
[Status 07:27:33 INFO] writing housekeeping
[Sequencer 07:27:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:27:33 INFO] incremented W scene to 138 completed views
[Sequencer 07:27:33 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:27:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:27:33 INFO] incremented to [AERI set: name X138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:27:33 INFO] W138.SIG(18)
[sigmove 07:27:33 DEBUG] transformed W138Ma.SPC -> W138MA.SPC
[sigmove 07:27:33 DEBUG] transformed W138Mb.SPC -> W138MB.SPC
[sigmove 07:27:33 DEBUG] transformed W138Mc.SPC -> W138MC.SPC
[sigmove 07:27:33 DEBUG] transformed W138Md.SPC -> W138MD.SPC
[sigmove 07:27:33 DEBUG] transformed W138Me.SPC -> W138ME.SPC
[sigmove 07:27:33 DEBUG] transformed W138Mf.SPC -> W138MF.SPC
[Status 07:27:33 INFO] data for W138 transferred to science data processing
[Tidy 07:27:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:27:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:27:33 INFO] resetting WatchDogTimer
[Status 07:27:33 INFO] Starting Set [AERI set: name X138, 6 scans, 0 angle, D16300 command]
[Ingest 07:27:33 INFO] Sending XML status message
[Status 07:27:33 INFO] Mirror angle: 0
[Mirror 07:27:33 INFO] rotating to position X
[Status 07:27:34 INFO] .SET file for ACQ96 ready
[Ingest 07:27:34 INFO] Starting acquisition
[Status 07:27:34 INFO] reading housekeeping
[Status 07:27:52 INFO] acquire complete
[Status 07:27:52 INFO] writing housekeeping
[Sequencer 07:27:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:27:52 INFO] incremented X scene to 138 completed views
[Sequencer 07:27:52 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:27:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:27:52 INFO] incremented to [AERI set: name Y138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:27:52 INFO] X138.SIG(18)
[sigmove 07:27:52 DEBUG] transformed X138Ma.SPC -> X138MA.SPC
[sigmove 07:27:52 DEBUG] transformed X138Mb.SPC -> X138MB.SPC
[sigmove 07:27:52 DEBUG] transformed X138Mc.SPC -> X138MC.SPC
[sigmove 07:27:52 DEBUG] transformed X138Md.SPC -> X138MD.SPC
[sigmove 07:27:52 DEBUG] transformed X138Me.SPC -> X138ME.SPC
[sigmove 07:27:52 DEBUG] transformed X138Mf.SPC -> X138MF.SPC
[Status 07:27:52 INFO] data for X138 transferred to science data processing
[Tidy 07:27:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:27:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:27:52 INFO] resetting WatchDogTimer
[Status 07:27:52 INFO] Starting Set [AERI set: name Y138, 6 scans, 0 angle, D16300 command]
[Ingest 07:27:52 INFO] Sending XML status message
[Status 07:27:52 INFO] Mirror angle: 0
[Mirror 07:27:53 INFO] rotating to position Y
[Status 07:27:53 INFO] .SET file for ACQ96 ready
[Ingest 07:27:53 INFO] Starting acquisition
[Status 07:27:53 INFO] reading housekeeping
[Status 07:28:11 INFO] acquire complete
[Status 07:28:11 INFO] writing housekeeping
[Sequencer 07:28:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:28:11 INFO] incremented Y scene to 138 completed views
[Sequencer 07:28:11 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:28:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:28:11 INFO] incremented to [AERI set: name Z138, 6 scans, 0 angle, D16300 command] set
[sigmove 07:28:11 INFO] Y138.SIG(18)
[sigmove 07:28:11 DEBUG] transformed Y138Ma.SPC -> Y138MA.SPC
[sigmove 07:28:11 DEBUG] transformed Y138Mb.SPC -> Y138MB.SPC
[sigmove 07:28:11 DEBUG] transformed Y138Mc.SPC -> Y138MC.SPC
[sigmove 07:28:11 DEBUG] transformed Y138Md.SPC -> Y138MD.SPC
[sigmove 07:28:11 DEBUG] transformed Y138Me.SPC -> Y138ME.SPC
[sigmove 07:28:11 DEBUG] transformed Y138Mf.SPC -> Y138MF.SPC
[Status 07:28:11 INFO] data for Y138 transferred to science data processing
[Tidy 07:28:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:28:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:28:11 INFO] resetting WatchDogTimer
[Status 07:28:11 INFO] Starting Set [AERI set: name Z138, 6 scans, 0 angle, D16300 command]
[Ingest 07:28:11 INFO] Sending XML status message
[Status 07:28:11 INFO] Mirror angle: 0
[Mirror 07:28:12 INFO] rotating to position Z
[Status 07:28:12 INFO] .SET file for ACQ96 ready
[Ingest 07:28:12 INFO] Starting acquisition
[Status 07:28:12 INFO] reading housekeeping
[Status 07:28:30 INFO] acquire complete
[Status 07:28:30 INFO] writing housekeeping
[Sequencer 07:28:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:28:30 INFO] incremented Z scene to 138 completed views
[Sequencer 07:28:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:28:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:28:30 INFO] incremented to [AERI set: name H139, 6 scans, 60 angle, D22500 command] set
[sigmove 07:28:30 INFO] Z138.SIG(18)
[sigmove 07:28:30 DEBUG] transformed Z138Ma.SPC -> Z138MA.SPC
[sigmove 07:28:30 DEBUG] transformed Z138Mb.SPC -> Z138MB.SPC
[sigmove 07:28:30 DEBUG] transformed Z138Mc.SPC -> Z138MC.SPC
[sigmove 07:28:30 DEBUG] transformed Z138Md.SPC -> Z138MD.SPC
[sigmove 07:28:30 DEBUG] transformed Z138Me.SPC -> Z138ME.SPC
[sigmove 07:28:30 DEBUG] transformed Z138Mf.SPC -> Z138MF.SPC
[Status 07:28:30 INFO] data for Z138 transferred to science data processing
[Tidy 07:28:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:28:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:28:30 INFO] resetting WatchDogTimer
[Status 07:28:31 INFO] Starting Set [AERI set: name H139, 6 scans, 60 angle, D22500 command]
[Ingest 07:28:31 INFO] Sending XML status message
[Status 07:28:31 INFO] Mirror angle: 60
[Mirror 07:28:31 INFO] rotating to position H
[Status 07:28:32 INFO] .SET file for ACQ96 ready
[Ingest 07:28:32 INFO] Starting acquisition
[Status 07:28:32 INFO] reading housekeeping
[Status 07:28:50 INFO] acquire complete
[Status 07:28:51 INFO] writing housekeeping
[Sequencer 07:28:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:28:51 INFO] incremented H scene to 139 completed views
[Sequencer 07:28:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:28:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:28:51 INFO] incremented to [AERI set: name A139, 6 scans, 120 angle, D28300 command] set
[sigmove 07:28:51 INFO] H139.SIG(18)
[sigmove 07:28:51 DEBUG] transformed H139Ma.SPC -> H139MA.SPC
[sigmove 07:28:51 DEBUG] transformed H139Mb.SPC -> H139MB.SPC
[sigmove 07:28:51 DEBUG] transformed H139Mc.SPC -> H139MC.SPC
[sigmove 07:28:51 DEBUG] transformed H139Md.SPC -> H139MD.SPC
[sigmove 07:28:51 DEBUG] transformed H139Me.SPC -> H139ME.SPC
[sigmove 07:28:51 DEBUG] transformed H139Mf.SPC -> H139MF.SPC
[Status 07:28:51 INFO] data for H139 transferred to science data processing
[Tidy 07:28:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:28:51 INFO] A137.FIN(19),H137.FIN(19),S137.FIN(19),T137.FIN(19),U137.FIN(19),V137.FIN(19),W137.FIN(19),X137.FIN(19),Y137.FIN(19),Z137.FIN(19),A138.FIN(19),H138.FIN(19),S138.FIN(19),T138.FIN(19),U138.FIN(19),V138.FIN(19),W138.FIN(19),X138.FIN(19),Y138.FIN(19),Z138.FIN(19)
[sigmove 07:28:51 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:28:51 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:28:53 DEBUG] done zipping
[WatchDog 07:28:53 INFO] resetting WatchDogTimer
[Status 07:28:54 INFO] Starting Set [AERI set: name A139, 6 scans, 120 angle, D28300 command]
[Ingest 07:28:54 INFO] Sending XML status message
[Status 07:28:54 INFO] Mirror angle: 120
[Mirror 07:28:54 INFO] rotating to position A
[Status 07:28:55 INFO] .SET file for ACQ96 ready
[Ingest 07:28:55 INFO] Starting acquisition
[Status 07:28:55 INFO] reading housekeeping
[Status 07:29:12 INFO] acquire complete
[Status 07:29:13 INFO] writing housekeeping
[Sequencer 07:29:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:29:13 INFO] incremented A scene to 139 completed views
[Sequencer 07:29:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:29:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:29:13 INFO] incremented to [AERI set: name S139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:29:13 INFO] A139.SIG(18)
[sigmove 07:29:13 DEBUG] transformed A139Ma.SPC -> A139MA.SPC
[sigmove 07:29:13 DEBUG] transformed A139Mb.SPC -> A139MB.SPC
[sigmove 07:29:13 DEBUG] transformed A139Mc.SPC -> A139MC.SPC
[sigmove 07:29:13 DEBUG] transformed A139Md.SPC -> A139MD.SPC
[sigmove 07:29:13 DEBUG] transformed A139Me.SPC -> A139ME.SPC
[sigmove 07:29:13 DEBUG] transformed A139Mf.SPC -> A139MF.SPC
[Status 07:29:13 INFO] data for A139 transferred to science data processing
[Tidy 07:29:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:29:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:29:13 INFO] resetting WatchDogTimer
[Status 07:29:13 INFO] Starting Set [AERI set: name S139, 6 scans, 0 angle, D16300 command]
[Ingest 07:29:13 INFO] Sending XML status message
[Status 07:29:13 INFO] Mirror angle: 0
[Mirror 07:29:13 INFO] rotating to position S
[Status 07:29:15 INFO] .SET file for ACQ96 ready
[Ingest 07:29:15 INFO] Starting acquisition
[Status 07:29:15 INFO] reading housekeeping
[Status 07:29:33 INFO] acquire complete
[Status 07:29:33 INFO] writing housekeeping
[Sequencer 07:29:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:29:33 INFO] incremented S scene to 139 completed views
[Sequencer 07:29:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:29:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:29:33 INFO] incremented to [AERI set: name T139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:29:33 INFO] S139.SIG(18)
[sigmove 07:29:33 DEBUG] transformed S139Ma.SPC -> S139MA.SPC
[sigmove 07:29:33 DEBUG] transformed S139Mb.SPC -> S139MB.SPC
[sigmove 07:29:33 DEBUG] transformed S139Mc.SPC -> S139MC.SPC
[sigmove 07:29:33 DEBUG] transformed S139Md.SPC -> S139MD.SPC
[sigmove 07:29:33 DEBUG] transformed S139Me.SPC -> S139ME.SPC
[sigmove 07:29:33 DEBUG] transformed S139Mf.SPC -> S139MF.SPC
[Status 07:29:33 INFO] data for S139 transferred to science data processing
[Tidy 07:29:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:29:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:29:33 INFO] resetting WatchDogTimer
[Status 07:29:34 INFO] Starting Set [AERI set: name T139, 6 scans, 0 angle, D16300 command]
[Ingest 07:29:34 INFO] Sending XML status message
[Status 07:29:34 INFO] Mirror angle: 0
[Mirror 07:29:34 INFO] rotating to position T
[Status 07:29:34 INFO] .SET file for ACQ96 ready
[Ingest 07:29:34 INFO] Starting acquisition
[Status 07:29:35 INFO] reading housekeeping
[Status 07:29:53 INFO] acquire complete
[Status 07:29:53 INFO] writing housekeeping
[Sequencer 07:29:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:29:53 INFO] incremented T scene to 139 completed views
[Sequencer 07:29:53 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:29:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:29:53 INFO] incremented to [AERI set: name U139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:29:53 INFO] T139.SIG(18)
[sigmove 07:29:53 DEBUG] transformed T139Ma.SPC -> T139MA.SPC
[sigmove 07:29:53 DEBUG] transformed T139Mb.SPC -> T139MB.SPC
[sigmove 07:29:53 DEBUG] transformed T139Mc.SPC -> T139MC.SPC
[sigmove 07:29:53 DEBUG] transformed T139Md.SPC -> T139MD.SPC
[sigmove 07:29:53 DEBUG] transformed T139Me.SPC -> T139ME.SPC
[sigmove 07:29:53 DEBUG] transformed T139Mf.SPC -> T139MF.SPC
[Status 07:29:53 INFO] data for T139 transferred to science data processing
[Tidy 07:29:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:29:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:29:53 INFO] resetting WatchDogTimer
[Status 07:29:54 INFO] Starting Set [AERI set: name U139, 6 scans, 0 angle, D16300 command]
[Ingest 07:29:54 INFO] Sending XML status message
[Status 07:29:54 INFO] Mirror angle: 0
[Mirror 07:29:54 INFO] rotating to position U
[Status 07:29:54 INFO] .SET file for ACQ96 ready
[Ingest 07:29:54 INFO] Starting acquisition
[Status 07:29:54 INFO] reading housekeeping
[Status 07:30:12 INFO] acquire complete
[Status 07:30:12 INFO] writing housekeeping
[Sequencer 07:30:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:30:12 INFO] incremented U scene to 139 completed views
[Sequencer 07:30:12 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:30:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:30:12 INFO] incremented to [AERI set: name V139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:30:12 INFO] U139.SIG(18)
[sigmove 07:30:12 DEBUG] transformed U139Ma.SPC -> U139MA.SPC
[sigmove 07:30:12 DEBUG] transformed U139Mb.SPC -> U139MB.SPC
[sigmove 07:30:12 DEBUG] transformed U139Mc.SPC -> U139MC.SPC
[sigmove 07:30:12 DEBUG] transformed U139Md.SPC -> U139MD.SPC
[sigmove 07:30:12 DEBUG] transformed U139Me.SPC -> U139ME.SPC
[sigmove 07:30:12 DEBUG] transformed U139Mf.SPC -> U139MF.SPC
[Status 07:30:12 INFO] data for U139 transferred to science data processing
[Tidy 07:30:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:30:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:30:12 INFO] resetting WatchDogTimer
[Status 07:30:13 INFO] Starting Set [AERI set: name V139, 6 scans, 0 angle, D16300 command]
[Ingest 07:30:13 INFO] Sending XML status message
[Status 07:30:13 INFO] Mirror angle: 0
[Mirror 07:30:13 INFO] rotating to position V
[Status 07:30:13 INFO] .SET file for ACQ96 ready
[Ingest 07:30:13 INFO] Starting acquisition
[Status 07:30:13 INFO] reading housekeeping
[Status 07:30:31 INFO] acquire complete
[Status 07:30:32 INFO] writing housekeeping
[Sequencer 07:30:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:30:32 INFO] incremented V scene to 139 completed views
[Sequencer 07:30:32 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:30:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:30:32 INFO] incremented to [AERI set: name W139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:30:32 INFO] V139.SIG(18)
[sigmove 07:30:32 DEBUG] transformed V139Ma.SPC -> V139MA.SPC
[sigmove 07:30:32 DEBUG] transformed V139Mb.SPC -> V139MB.SPC
[sigmove 07:30:32 DEBUG] transformed V139Mc.SPC -> V139MC.SPC
[sigmove 07:30:32 DEBUG] transformed V139Md.SPC -> V139MD.SPC
[sigmove 07:30:32 DEBUG] transformed V139Me.SPC -> V139ME.SPC
[sigmove 07:30:32 DEBUG] transformed V139Mf.SPC -> V139MF.SPC
[Status 07:30:32 INFO] data for V139 transferred to science data processing
[Tidy 07:30:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:30:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:30:32 INFO] resetting WatchDogTimer
[Status 07:30:32 INFO] Starting Set [AERI set: name W139, 6 scans, 0 angle, D16300 command]
[Ingest 07:30:32 INFO] Sending XML status message
[Status 07:30:32 INFO] Mirror angle: 0
[Mirror 07:30:32 INFO] rotating to position W
[Status 07:30:32 INFO] .SET file for ACQ96 ready
[Ingest 07:30:32 INFO] Starting acquisition
[Status 07:30:33 INFO] reading housekeeping
[Status 07:30:50 INFO] acquire complete
[Status 07:30:51 INFO] writing housekeeping
[Sequencer 07:30:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:30:51 INFO] incremented W scene to 139 completed views
[Sequencer 07:30:51 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:30:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:30:51 INFO] incremented to [AERI set: name X139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:30:51 INFO] W139.SIG(18)
[sigmove 07:30:51 DEBUG] transformed W139Ma.SPC -> W139MA.SPC
[sigmove 07:30:51 DEBUG] transformed W139Mb.SPC -> W139MB.SPC
[sigmove 07:30:51 DEBUG] transformed W139Mc.SPC -> W139MC.SPC
[sigmove 07:30:51 DEBUG] transformed W139Md.SPC -> W139MD.SPC
[sigmove 07:30:51 DEBUG] transformed W139Me.SPC -> W139ME.SPC
[sigmove 07:30:51 DEBUG] transformed W139Mf.SPC -> W139MF.SPC
[Status 07:30:51 INFO] data for W139 transferred to science data processing
[Tidy 07:30:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:30:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:30:51 INFO] resetting WatchDogTimer
[Status 07:30:51 INFO] Starting Set [AERI set: name X139, 6 scans, 0 angle, D16300 command]
[Ingest 07:30:51 INFO] Sending XML status message
[Status 07:30:51 INFO] Mirror angle: 0
[Mirror 07:30:51 INFO] rotating to position X
[Status 07:30:51 INFO] .SET file for ACQ96 ready
[Ingest 07:30:51 INFO] Starting acquisition
[Status 07:30:52 INFO] reading housekeeping
[Status 07:31:09 INFO] acquire complete
[Status 07:31:10 INFO] writing housekeeping
[Sequencer 07:31:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:31:10 INFO] incremented X scene to 139 completed views
[Sequencer 07:31:10 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:31:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:31:10 INFO] incremented to [AERI set: name Y139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:31:10 INFO] X139.SIG(18)
[sigmove 07:31:10 DEBUG] transformed X139Ma.SPC -> X139MA.SPC
[sigmove 07:31:10 DEBUG] transformed X139Mb.SPC -> X139MB.SPC
[sigmove 07:31:10 DEBUG] transformed X139Mc.SPC -> X139MC.SPC
[sigmove 07:31:10 DEBUG] transformed X139Md.SPC -> X139MD.SPC
[sigmove 07:31:10 DEBUG] transformed X139Me.SPC -> X139ME.SPC
[sigmove 07:31:10 DEBUG] transformed X139Mf.SPC -> X139MF.SPC
[Status 07:31:10 INFO] data for X139 transferred to science data processing
[Tidy 07:31:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:31:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:31:10 INFO] resetting WatchDogTimer
[Status 07:31:10 INFO] Starting Set [AERI set: name Y139, 6 scans, 0 angle, D16300 command]
[Ingest 07:31:10 INFO] Sending XML status message
[Status 07:31:10 INFO] Mirror angle: 0
[Mirror 07:31:10 INFO] rotating to position Y
[Status 07:31:10 INFO] .SET file for ACQ96 ready
[Ingest 07:31:11 INFO] Starting acquisition
[Status 07:31:11 INFO] reading housekeeping
[Status 07:31:28 INFO] acquire complete
[Status 07:31:29 INFO] writing housekeeping
[Sequencer 07:31:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:31:29 INFO] incremented Y scene to 139 completed views
[Sequencer 07:31:29 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:31:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:31:29 INFO] incremented to [AERI set: name Z139, 6 scans, 0 angle, D16300 command] set
[sigmove 07:31:29 INFO] Y139.SIG(18)
[sigmove 07:31:29 DEBUG] transformed Y139Ma.SPC -> Y139MA.SPC
[sigmove 07:31:29 DEBUG] transformed Y139Mb.SPC -> Y139MB.SPC
[sigmove 07:31:29 DEBUG] transformed Y139Mc.SPC -> Y139MC.SPC
[sigmove 07:31:29 DEBUG] transformed Y139Md.SPC -> Y139MD.SPC
[sigmove 07:31:29 DEBUG] transformed Y139Me.SPC -> Y139ME.SPC
[sigmove 07:31:29 DEBUG] transformed Y139Mf.SPC -> Y139MF.SPC
[Status 07:31:29 INFO] data for Y139 transferred to science data processing
[Tidy 07:31:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:31:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:31:29 INFO] resetting WatchDogTimer
[Status 07:31:29 INFO] Starting Set [AERI set: name Z139, 6 scans, 0 angle, D16300 command]
[Ingest 07:31:29 INFO] Sending XML status message
[Status 07:31:29 INFO] Mirror angle: 0
[Mirror 07:31:29 INFO] rotating to position Z
[Status 07:31:29 INFO] .SET file for ACQ96 ready
[Ingest 07:31:30 INFO] Starting acquisition
[Status 07:31:30 INFO] reading housekeeping
[Status 07:31:47 INFO] acquire complete
[Status 07:31:48 INFO] writing housekeeping
[Sequencer 07:31:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:31:48 INFO] incremented Z scene to 139 completed views
[Sequencer 07:31:48 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:31:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:31:48 INFO] incremented to [AERI set: name A140, 6 scans, 120 angle, D28300 command] set
[sigmove 07:31:48 INFO] Z139.SIG(18)
[sigmove 07:31:48 DEBUG] transformed Z139Ma.SPC -> Z139MA.SPC
[sigmove 07:31:48 DEBUG] transformed Z139Mb.SPC -> Z139MB.SPC
[sigmove 07:31:48 DEBUG] transformed Z139Mc.SPC -> Z139MC.SPC
[sigmove 07:31:48 DEBUG] transformed Z139Md.SPC -> Z139MD.SPC
[sigmove 07:31:48 DEBUG] transformed Z139Me.SPC -> Z139ME.SPC
[sigmove 07:31:48 DEBUG] transformed Z139Mf.SPC -> Z139MF.SPC
[Status 07:31:48 INFO] data for Z139 transferred to science data processing
[Tidy 07:31:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:31:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:31:48 INFO] resetting WatchDogTimer
[Status 07:31:48 INFO] Starting Set [AERI set: name A140, 6 scans, 120 angle, D28300 command]
[Ingest 07:31:48 INFO] Sending XML status message
[Status 07:31:48 INFO] Mirror angle: 120
[Mirror 07:31:48 INFO] rotating to position A
[Status 07:31:50 INFO] .SET file for ACQ96 ready
[Ingest 07:31:50 INFO] Starting acquisition
[Status 07:31:50 INFO] reading housekeeping
[Status 07:32:08 INFO] acquire complete
[Status 07:32:08 INFO] writing housekeeping
[Sequencer 07:32:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:32:08 INFO] incremented A scene to 140 completed views
[Sequencer 07:32:08 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:32:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:32:08 INFO] incremented to [AERI set: name H140, 6 scans, 60 angle, D22500 command] set
[sigmove 07:32:08 INFO] A140.SIG(18)
[sigmove 07:32:08 DEBUG] transformed A140Ma.SPC -> A140MA.SPC
[sigmove 07:32:08 DEBUG] transformed A140Mb.SPC -> A140MB.SPC
[sigmove 07:32:08 DEBUG] transformed A140Mc.SPC -> A140MC.SPC
[sigmove 07:32:08 DEBUG] transformed A140Md.SPC -> A140MD.SPC
[sigmove 07:32:08 DEBUG] transformed A140Me.SPC -> A140ME.SPC
[sigmove 07:32:08 DEBUG] transformed A140Mf.SPC -> A140MF.SPC
[Status 07:32:08 INFO] data for A140 transferred to science data processing
[Tidy 07:32:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:32:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:32:08 INFO] resetting WatchDogTimer
[Status 07:32:08 INFO] Starting Set [AERI set: name H140, 6 scans, 60 angle, D22500 command]
[Ingest 07:32:08 INFO] Sending XML status message
[Status 07:32:08 INFO] Mirror angle: 60
[Mirror 07:32:08 INFO] rotating to position H
[Status 07:32:09 INFO] .SET file for ACQ96 ready
[Ingest 07:32:09 INFO] Starting acquisition
[Status 07:32:10 INFO] reading housekeeping
[Status 07:32:28 INFO] acquire complete
[Status 07:32:28 INFO] writing housekeeping
[Sequencer 07:32:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:32:28 INFO] incremented H scene to 140 completed views
[Sequencer 07:32:28 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:32:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:32:28 INFO] incremented to [AERI set: name S140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:32:28 INFO] H140.SIG(18)
[sigmove 07:32:28 DEBUG] transformed H140Ma.SPC -> H140MA.SPC
[sigmove 07:32:28 DEBUG] transformed H140Mb.SPC -> H140MB.SPC
[sigmove 07:32:28 DEBUG] transformed H140Mc.SPC -> H140MC.SPC
[sigmove 07:32:28 DEBUG] transformed H140Md.SPC -> H140MD.SPC
[sigmove 07:32:28 DEBUG] transformed H140Me.SPC -> H140ME.SPC
[sigmove 07:32:28 DEBUG] transformed H140Mf.SPC -> H140MF.SPC
[Status 07:32:28 INFO] data for H140 transferred to science data processing
[Tidy 07:32:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:32:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:32:28 INFO] resetting WatchDogTimer
[Status 07:32:29 INFO] Starting Set [AERI set: name S140, 6 scans, 0 angle, D16300 command]
[Ingest 07:32:29 INFO] Sending XML status message
[Status 07:32:29 INFO] Mirror angle: 0
[Mirror 07:32:29 INFO] rotating to position S
[Status 07:32:30 INFO] .SET file for ACQ96 ready
[Ingest 07:32:30 INFO] Starting acquisition
[Status 07:32:30 INFO] reading housekeeping
[Status 07:32:48 INFO] acquire complete
[Status 07:32:49 INFO] writing housekeeping
[Sequencer 07:32:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:32:49 INFO] incremented S scene to 140 completed views
[Sequencer 07:32:49 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:32:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:32:49 INFO] incremented to [AERI set: name T140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:32:49 INFO] S140.SIG(18)
[sigmove 07:32:49 DEBUG] transformed S140Ma.SPC -> S140MA.SPC
[sigmove 07:32:49 DEBUG] transformed S140Mb.SPC -> S140MB.SPC
[sigmove 07:32:49 DEBUG] transformed S140Mc.SPC -> S140MC.SPC
[sigmove 07:32:49 DEBUG] transformed S140Md.SPC -> S140MD.SPC
[sigmove 07:32:49 DEBUG] transformed S140Me.SPC -> S140ME.SPC
[sigmove 07:32:49 DEBUG] transformed S140Mf.SPC -> S140MF.SPC
[Status 07:32:49 INFO] data for S140 transferred to science data processing
[Tidy 07:32:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:32:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:32:49 INFO] resetting WatchDogTimer
[Status 07:32:49 INFO] Starting Set [AERI set: name T140, 6 scans, 0 angle, D16300 command]
[Ingest 07:32:49 INFO] Sending XML status message
[Status 07:32:49 INFO] Mirror angle: 0
[Mirror 07:32:49 INFO] rotating to position T
[Status 07:32:50 INFO] .SET file for ACQ96 ready
[Ingest 07:32:50 INFO] Starting acquisition
[Status 07:32:50 INFO] reading housekeeping
[Status 07:33:08 INFO] acquire complete
[Status 07:33:09 INFO] writing housekeeping
[Sequencer 07:33:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:33:09 INFO] incremented T scene to 140 completed views
[Sequencer 07:33:09 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:33:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:33:09 INFO] incremented to [AERI set: name U140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:33:09 INFO] T140.SIG(18)
[sigmove 07:33:09 DEBUG] transformed T140Ma.SPC -> T140MA.SPC
[sigmove 07:33:09 DEBUG] transformed T140Mb.SPC -> T140MB.SPC
[sigmove 07:33:09 DEBUG] transformed T140Mc.SPC -> T140MC.SPC
[sigmove 07:33:09 DEBUG] transformed T140Md.SPC -> T140MD.SPC
[sigmove 07:33:09 DEBUG] transformed T140Me.SPC -> T140ME.SPC
[sigmove 07:33:09 DEBUG] transformed T140Mf.SPC -> T140MF.SPC
[Status 07:33:09 INFO] data for T140 transferred to science data processing
[Tidy 07:33:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:33:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:33:09 INFO] resetting WatchDogTimer
[Status 07:33:09 INFO] Starting Set [AERI set: name U140, 6 scans, 0 angle, D16300 command]
[Ingest 07:33:09 INFO] Sending XML status message
[Status 07:33:09 INFO] Mirror angle: 0
[Mirror 07:33:09 INFO] rotating to position U
[Status 07:33:09 INFO] .SET file for ACQ96 ready
[Ingest 07:33:10 INFO] Starting acquisition
[Status 07:33:10 INFO] reading housekeeping
[Status 07:33:27 INFO] acquire complete
[Status 07:33:28 INFO] writing housekeeping
[Sequencer 07:33:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:33:28 INFO] incremented U scene to 140 completed views
[Sequencer 07:33:28 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:33:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:33:28 INFO] incremented to [AERI set: name V140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:33:28 INFO] U140.SIG(18)
[sigmove 07:33:28 DEBUG] transformed U140Ma.SPC -> U140MA.SPC
[sigmove 07:33:28 DEBUG] transformed U140Mb.SPC -> U140MB.SPC
[sigmove 07:33:28 DEBUG] transformed U140Mc.SPC -> U140MC.SPC
[sigmove 07:33:28 DEBUG] transformed U140Md.SPC -> U140MD.SPC
[sigmove 07:33:28 DEBUG] transformed U140Me.SPC -> U140ME.SPC
[sigmove 07:33:28 DEBUG] transformed U140Mf.SPC -> U140MF.SPC
[Status 07:33:28 INFO] data for U140 transferred to science data processing
[Tidy 07:33:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:33:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:33:28 INFO] resetting WatchDogTimer
[Status 07:33:28 INFO] Starting Set [AERI set: name V140, 6 scans, 0 angle, D16300 command]
[Ingest 07:33:28 INFO] Sending XML status message
[Status 07:33:28 INFO] Mirror angle: 0
[Mirror 07:33:28 INFO] rotating to position V
[Status 07:33:29 INFO] .SET file for ACQ96 ready
[Ingest 07:33:29 INFO] Starting acquisition
[Status 07:33:29 INFO] reading housekeeping
[Status 07:33:46 INFO] acquire complete
[Status 07:33:47 INFO] writing housekeeping
[Sequencer 07:33:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:33:47 INFO] incremented V scene to 140 completed views
[Sequencer 07:33:47 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:33:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:33:47 INFO] incremented to [AERI set: name W140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:33:47 INFO] V140.SIG(18)
[sigmove 07:33:47 DEBUG] transformed V140Ma.SPC -> V140MA.SPC
[sigmove 07:33:47 DEBUG] transformed V140Mb.SPC -> V140MB.SPC
[sigmove 07:33:47 DEBUG] transformed V140Mc.SPC -> V140MC.SPC
[sigmove 07:33:47 DEBUG] transformed V140Md.SPC -> V140MD.SPC
[sigmove 07:33:47 DEBUG] transformed V140Me.SPC -> V140ME.SPC
[sigmove 07:33:47 DEBUG] transformed V140Mf.SPC -> V140MF.SPC
[Status 07:33:47 INFO] data for V140 transferred to science data processing
[Tidy 07:33:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:33:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:33:47 INFO] resetting WatchDogTimer
[Status 07:33:47 INFO] Starting Set [AERI set: name W140, 6 scans, 0 angle, D16300 command]
[Ingest 07:33:47 INFO] Sending XML status message
[Status 07:33:47 INFO] Mirror angle: 0
[Mirror 07:33:47 INFO] rotating to position W
[Status 07:33:48 INFO] .SET file for ACQ96 ready
[Ingest 07:33:48 INFO] Starting acquisition
[Status 07:33:48 INFO] reading housekeeping
[Status 07:34:05 INFO] acquire complete
[Status 07:34:06 INFO] writing housekeeping
[Sequencer 07:34:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:34:06 INFO] incremented W scene to 140 completed views
[Sequencer 07:34:06 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:34:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:34:06 INFO] incremented to [AERI set: name X140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:34:06 INFO] W140.SIG(18)
[sigmove 07:34:06 DEBUG] transformed W140Ma.SPC -> W140MA.SPC
[sigmove 07:34:06 DEBUG] transformed W140Mb.SPC -> W140MB.SPC
[sigmove 07:34:06 DEBUG] transformed W140Mc.SPC -> W140MC.SPC
[sigmove 07:34:06 DEBUG] transformed W140Md.SPC -> W140MD.SPC
[sigmove 07:34:06 DEBUG] transformed W140Me.SPC -> W140ME.SPC
[sigmove 07:34:06 DEBUG] transformed W140Mf.SPC -> W140MF.SPC
[Status 07:34:06 INFO] data for W140 transferred to science data processing
[Tidy 07:34:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:34:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:34:06 INFO] resetting WatchDogTimer
[Status 07:34:06 INFO] Starting Set [AERI set: name X140, 6 scans, 0 angle, D16300 command]
[Ingest 07:34:06 INFO] Sending XML status message
[Status 07:34:06 INFO] Mirror angle: 0
[Mirror 07:34:06 INFO] rotating to position X
[Status 07:34:07 INFO] .SET file for ACQ96 ready
[Ingest 07:34:07 INFO] Starting acquisition
[Status 07:34:07 INFO] reading housekeeping
[Status 07:34:24 INFO] acquire complete
[Status 07:34:25 INFO] writing housekeeping
[Sequencer 07:34:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:34:25 INFO] incremented X scene to 140 completed views
[Sequencer 07:34:25 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:34:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:34:25 INFO] incremented to [AERI set: name Y140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:34:25 INFO] X140.SIG(18)
[sigmove 07:34:25 DEBUG] transformed X140Ma.SPC -> X140MA.SPC
[sigmove 07:34:25 DEBUG] transformed X140Mb.SPC -> X140MB.SPC
[sigmove 07:34:25 DEBUG] transformed X140Mc.SPC -> X140MC.SPC
[sigmove 07:34:25 DEBUG] transformed X140Md.SPC -> X140MD.SPC
[sigmove 07:34:25 DEBUG] transformed X140Me.SPC -> X140ME.SPC
[sigmove 07:34:25 DEBUG] transformed X140Mf.SPC -> X140MF.SPC
[Status 07:34:25 INFO] data for X140 transferred to science data processing
[Tidy 07:34:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:34:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:34:25 INFO] resetting WatchDogTimer
[Status 07:34:25 INFO] Starting Set [AERI set: name Y140, 6 scans, 0 angle, D16300 command]
[Ingest 07:34:25 INFO] Sending XML status message
[Status 07:34:25 INFO] Mirror angle: 0
[Mirror 07:34:25 INFO] rotating to position Y
[Status 07:34:26 INFO] .SET file for ACQ96 ready
[Ingest 07:34:26 INFO] Starting acquisition
[Status 07:34:26 INFO] reading housekeeping
[Status 07:34:44 INFO] acquire complete
[Status 07:34:44 INFO] writing housekeeping
[Sequencer 07:34:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:34:44 INFO] incremented Y scene to 140 completed views
[Sequencer 07:34:44 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:34:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:34:44 INFO] incremented to [AERI set: name Z140, 6 scans, 0 angle, D16300 command] set
[sigmove 07:34:44 INFO] Y140.SIG(18)
[sigmove 07:34:44 DEBUG] transformed Y140Ma.SPC -> Y140MA.SPC
[sigmove 07:34:44 DEBUG] transformed Y140Mb.SPC -> Y140MB.SPC
[sigmove 07:34:44 DEBUG] transformed Y140Mc.SPC -> Y140MC.SPC
[sigmove 07:34:44 DEBUG] transformed Y140Md.SPC -> Y140MD.SPC
[sigmove 07:34:44 DEBUG] transformed Y140Me.SPC -> Y140ME.SPC
[sigmove 07:34:44 DEBUG] transformed Y140Mf.SPC -> Y140MF.SPC
[Status 07:34:44 INFO] data for Y140 transferred to science data processing
[Tidy 07:34:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:34:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:34:44 INFO] resetting WatchDogTimer
[Status 07:34:44 INFO] Starting Set [AERI set: name Z140, 6 scans, 0 angle, D16300 command]
[Ingest 07:34:44 INFO] Sending XML status message
[Status 07:34:44 INFO] Mirror angle: 0
[Mirror 07:34:45 INFO] rotating to position Z
[Status 07:34:45 INFO] .SET file for ACQ96 ready
[Ingest 07:34:45 INFO] Starting acquisition
[Status 07:34:45 INFO] reading housekeeping
[Status 07:35:03 INFO] acquire complete
[Status 07:35:03 INFO] writing housekeeping
[Sequencer 07:35:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:35:03 INFO] incremented Z scene to 140 completed views
[Sequencer 07:35:03 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:35:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:35:03 INFO] incremented to [AERI set: name H141, 6 scans, 60 angle, D22500 command] set
[sigmove 07:35:03 INFO] Z140.SIG(18)
[sigmove 07:35:03 DEBUG] transformed Z140Ma.SPC -> Z140MA.SPC
[sigmove 07:35:03 DEBUG] transformed Z140Mb.SPC -> Z140MB.SPC
[sigmove 07:35:03 DEBUG] transformed Z140Mc.SPC -> Z140MC.SPC
[sigmove 07:35:03 DEBUG] transformed Z140Md.SPC -> Z140MD.SPC
[sigmove 07:35:03 DEBUG] transformed Z140Me.SPC -> Z140ME.SPC
[sigmove 07:35:03 DEBUG] transformed Z140Mf.SPC -> Z140MF.SPC
[Status 07:35:03 INFO] data for Z140 transferred to science data processing
[Tidy 07:35:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:35:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:35:03 INFO] resetting WatchDogTimer
[Status 07:35:03 INFO] Starting Set [AERI set: name H141, 6 scans, 60 angle, D22500 command]
[Ingest 07:35:03 INFO] Sending XML status message
[Status 07:35:03 INFO] Mirror angle: 60
[Mirror 07:35:04 INFO] rotating to position H
[Status 07:35:04 INFO] .SET file for ACQ96 ready
[Ingest 07:35:05 INFO] Starting acquisition
[Status 07:35:05 INFO] reading housekeeping
[Status 07:35:23 INFO] acquire complete
[Status 07:35:23 INFO] writing housekeeping
[Sequencer 07:35:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:35:23 INFO] incremented H scene to 141 completed views
[Sequencer 07:35:23 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:35:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:35:23 INFO] incremented to [AERI set: name A141, 6 scans, 120 angle, D28300 command] set
[sigmove 07:35:23 INFO] H141.SIG(18)
[sigmove 07:35:23 DEBUG] transformed H141Ma.SPC -> H141MA.SPC
[sigmove 07:35:23 DEBUG] transformed H141Mb.SPC -> H141MB.SPC
[sigmove 07:35:23 DEBUG] transformed H141Mc.SPC -> H141MC.SPC
[sigmove 07:35:23 DEBUG] transformed H141Md.SPC -> H141MD.SPC
[sigmove 07:35:23 DEBUG] transformed H141Me.SPC -> H141ME.SPC
[sigmove 07:35:23 DEBUG] transformed H141Mf.SPC -> H141MF.SPC
[Status 07:35:23 INFO] data for H141 transferred to science data processing
[Tidy 07:35:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:35:24 INFO] A139.FIN(19),H139.FIN(19),S139.FIN(19),T139.FIN(19),U139.FIN(19),V139.FIN(19),W139.FIN(19),X139.FIN(19),Y139.FIN(19),Z139.FIN(19),A140.FIN(19),H140.FIN(19),S140.FIN(19),T140.FIN(19),U140.FIN(19),V140.FIN(19),W140.FIN(19),X140.FIN(19),Y140.FIN(19),Z140.FIN(19)
[sigmove 07:35:24 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:35:24 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:35:26 DEBUG] done zipping
[WatchDog 07:35:26 INFO] resetting WatchDogTimer
[Status 07:35:26 INFO] Starting Set [AERI set: name A141, 6 scans, 120 angle, D28300 command]
[Ingest 07:35:26 INFO] Sending XML status message
[Status 07:35:27 INFO] Mirror angle: 120
[Mirror 07:35:27 INFO] rotating to position A
[Status 07:35:27 INFO] .SET file for ACQ96 ready
[Ingest 07:35:28 INFO] Starting acquisition
[Status 07:35:28 INFO] reading housekeeping
[Status 07:35:45 INFO] acquire complete
[Status 07:35:46 INFO] writing housekeeping
[Sequencer 07:35:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:35:46 INFO] incremented A scene to 141 completed views
[Sequencer 07:35:46 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:35:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:35:46 INFO] incremented to [AERI set: name S141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:35:46 INFO] A141.SIG(18)
[sigmove 07:35:46 DEBUG] transformed A141Ma.SPC -> A141MA.SPC
[sigmove 07:35:46 DEBUG] transformed A141Mb.SPC -> A141MB.SPC
[sigmove 07:35:46 DEBUG] transformed A141Mc.SPC -> A141MC.SPC
[sigmove 07:35:46 DEBUG] transformed A141Md.SPC -> A141MD.SPC
[sigmove 07:35:46 DEBUG] transformed A141Me.SPC -> A141ME.SPC
[sigmove 07:35:46 DEBUG] transformed A141Mf.SPC -> A141MF.SPC
[Status 07:35:46 INFO] data for A141 transferred to science data processing
[Tidy 07:35:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:35:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:35:46 INFO] resetting WatchDogTimer
[Status 07:35:46 INFO] Starting Set [AERI set: name S141, 6 scans, 0 angle, D16300 command]
[Ingest 07:35:46 INFO] Sending XML status message
[Status 07:35:46 INFO] Mirror angle: 0
[Mirror 07:35:46 INFO] rotating to position S
[Status 07:35:48 INFO] .SET file for ACQ96 ready
[Ingest 07:35:48 INFO] Starting acquisition
[Status 07:35:48 INFO] reading housekeeping
[Status 07:36:06 INFO] acquire complete
[Status 07:36:06 INFO] writing housekeeping
[Sequencer 07:36:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:36:06 INFO] incremented S scene to 141 completed views
[Sequencer 07:36:06 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:36:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:36:06 INFO] incremented to [AERI set: name T141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:36:06 INFO] S141.SIG(18)
[sigmove 07:36:06 DEBUG] transformed S141Ma.SPC -> S141MA.SPC
[sigmove 07:36:06 DEBUG] transformed S141Mb.SPC -> S141MB.SPC
[sigmove 07:36:06 DEBUG] transformed S141Mc.SPC -> S141MC.SPC
[sigmove 07:36:06 DEBUG] transformed S141Md.SPC -> S141MD.SPC
[sigmove 07:36:06 DEBUG] transformed S141Me.SPC -> S141ME.SPC
[sigmove 07:36:06 DEBUG] transformed S141Mf.SPC -> S141MF.SPC
[Status 07:36:06 INFO] data for S141 transferred to science data processing
[Tidy 07:36:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:36:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:36:06 INFO] resetting WatchDogTimer
[Status 07:36:06 INFO] Starting Set [AERI set: name T141, 6 scans, 0 angle, D16300 command]
[Ingest 07:36:06 INFO] Sending XML status message
[Status 07:36:06 INFO] Mirror angle: 0
[Mirror 07:36:07 INFO] rotating to position T
[Status 07:36:07 INFO] .SET file for ACQ96 ready
[Ingest 07:36:07 INFO] Starting acquisition
[Status 07:36:07 INFO] reading housekeeping
[Status 07:36:25 INFO] acquire complete
[Status 07:36:25 INFO] writing housekeeping
[Sequencer 07:36:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:36:25 INFO] incremented T scene to 141 completed views
[Sequencer 07:36:25 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:36:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:36:25 INFO] incremented to [AERI set: name U141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:36:25 INFO] T141.SIG(18)
[sigmove 07:36:25 DEBUG] transformed T141Ma.SPC -> T141MA.SPC
[sigmove 07:36:25 DEBUG] transformed T141Mb.SPC -> T141MB.SPC
[sigmove 07:36:25 DEBUG] transformed T141Mc.SPC -> T141MC.SPC
[sigmove 07:36:25 DEBUG] transformed T141Md.SPC -> T141MD.SPC
[sigmove 07:36:25 DEBUG] transformed T141Me.SPC -> T141ME.SPC
[sigmove 07:36:25 DEBUG] transformed T141Mf.SPC -> T141MF.SPC
[Status 07:36:25 INFO] data for T141 transferred to science data processing
[Tidy 07:36:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:36:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:36:25 INFO] resetting WatchDogTimer
[Status 07:36:25 INFO] Starting Set [AERI set: name U141, 6 scans, 0 angle, D16300 command]
[Ingest 07:36:25 INFO] Sending XML status message
[Status 07:36:25 INFO] Mirror angle: 0
[Mirror 07:36:26 INFO] rotating to position U
[Status 07:36:26 INFO] .SET file for ACQ96 ready
[Ingest 07:36:26 INFO] Starting acquisition
[Status 07:36:26 INFO] reading housekeeping
[Status 07:36:44 INFO] acquire complete
[Status 07:36:44 INFO] writing housekeeping
[Sequencer 07:36:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:36:44 INFO] incremented U scene to 141 completed views
[Sequencer 07:36:44 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:36:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:36:44 INFO] incremented to [AERI set: name V141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:36:44 INFO] U141.SIG(18)
[sigmove 07:36:44 DEBUG] transformed U141Ma.SPC -> U141MA.SPC
[sigmove 07:36:44 DEBUG] transformed U141Mb.SPC -> U141MB.SPC
[sigmove 07:36:44 DEBUG] transformed U141Mc.SPC -> U141MC.SPC
[sigmove 07:36:44 DEBUG] transformed U141Md.SPC -> U141MD.SPC
[sigmove 07:36:44 DEBUG] transformed U141Me.SPC -> U141ME.SPC
[sigmove 07:36:44 DEBUG] transformed U141Mf.SPC -> U141MF.SPC
[Status 07:36:44 INFO] data for U141 transferred to science data processing
[Tidy 07:36:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:36:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:36:44 INFO] resetting WatchDogTimer
[Status 07:36:44 INFO] Starting Set [AERI set: name V141, 6 scans, 0 angle, D16300 command]
[Ingest 07:36:44 INFO] Sending XML status message
[Status 07:36:44 INFO] Mirror angle: 0
[Mirror 07:36:45 INFO] rotating to position V
[Status 07:36:45 INFO] .SET file for ACQ96 ready
[Ingest 07:36:45 INFO] Starting acquisition
[Status 07:36:45 INFO] reading housekeeping
[Status 07:37:03 INFO] acquire complete
[Status 07:37:03 INFO] writing housekeeping
[Sequencer 07:37:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:37:03 INFO] incremented V scene to 141 completed views
[Sequencer 07:37:03 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:37:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:37:03 INFO] incremented to [AERI set: name W141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:37:03 INFO] V141.SIG(18)
[sigmove 07:37:03 DEBUG] transformed V141Ma.SPC -> V141MA.SPC
[sigmove 07:37:03 DEBUG] transformed V141Mb.SPC -> V141MB.SPC
[sigmove 07:37:03 DEBUG] transformed V141Mc.SPC -> V141MC.SPC
[sigmove 07:37:03 DEBUG] transformed V141Md.SPC -> V141MD.SPC
[sigmove 07:37:03 DEBUG] transformed V141Me.SPC -> V141ME.SPC
[sigmove 07:37:03 DEBUG] transformed V141Mf.SPC -> V141MF.SPC
[Status 07:37:03 INFO] data for V141 transferred to science data processing
[Tidy 07:37:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:37:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:37:03 INFO] resetting WatchDogTimer
[Status 07:37:04 INFO] Starting Set [AERI set: name W141, 6 scans, 0 angle, D16300 command]
[Ingest 07:37:04 INFO] Sending XML status message
[Status 07:37:04 INFO] Mirror angle: 0
[Mirror 07:37:04 INFO] rotating to position W
[Status 07:37:04 INFO] .SET file for ACQ96 ready
[Ingest 07:37:04 INFO] Starting acquisition
[Status 07:37:04 INFO] reading housekeeping
[Status 07:37:22 INFO] acquire complete
[Status 07:37:22 INFO] writing housekeeping
[Sequencer 07:37:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:37:22 INFO] incremented W scene to 141 completed views
[Sequencer 07:37:22 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:37:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:37:22 INFO] incremented to [AERI set: name X141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:37:22 INFO] W141.SIG(18)
[sigmove 07:37:22 DEBUG] transformed W141Ma.SPC -> W141MA.SPC
[sigmove 07:37:22 DEBUG] transformed W141Mb.SPC -> W141MB.SPC
[sigmove 07:37:22 DEBUG] transformed W141Mc.SPC -> W141MC.SPC
[sigmove 07:37:22 DEBUG] transformed W141Md.SPC -> W141MD.SPC
[sigmove 07:37:22 DEBUG] transformed W141Me.SPC -> W141ME.SPC
[sigmove 07:37:22 DEBUG] transformed W141Mf.SPC -> W141MF.SPC
[Status 07:37:22 INFO] data for W141 transferred to science data processing
[Tidy 07:37:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:37:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:37:22 INFO] resetting WatchDogTimer
[Status 07:37:23 INFO] Starting Set [AERI set: name X141, 6 scans, 0 angle, D16300 command]
[Ingest 07:37:23 INFO] Sending XML status message
[Status 07:37:23 INFO] Mirror angle: 0
[Mirror 07:37:23 INFO] rotating to position X
[Status 07:37:23 INFO] .SET file for ACQ96 ready
[Ingest 07:37:23 INFO] Starting acquisition
[Status 07:37:23 INFO] reading housekeeping
[Status 07:37:41 INFO] acquire complete
[Status 07:37:42 INFO] writing housekeeping
[Sequencer 07:37:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:37:42 INFO] incremented X scene to 141 completed views
[Sequencer 07:37:42 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:37:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:37:42 INFO] incremented to [AERI set: name Y141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:37:42 INFO] X141.SIG(18)
[sigmove 07:37:42 DEBUG] transformed X141Ma.SPC -> X141MA.SPC
[sigmove 07:37:42 DEBUG] transformed X141Mb.SPC -> X141MB.SPC
[sigmove 07:37:42 DEBUG] transformed X141Mc.SPC -> X141MC.SPC
[sigmove 07:37:42 DEBUG] transformed X141Md.SPC -> X141MD.SPC
[sigmove 07:37:42 DEBUG] transformed X141Me.SPC -> X141ME.SPC
[sigmove 07:37:42 DEBUG] transformed X141Mf.SPC -> X141MF.SPC
[Status 07:37:42 INFO] data for X141 transferred to science data processing
[Tidy 07:37:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:37:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:37:42 INFO] resetting WatchDogTimer
[Status 07:37:42 INFO] Starting Set [AERI set: name Y141, 6 scans, 0 angle, D16300 command]
[Ingest 07:37:42 INFO] Sending XML status message
[Status 07:37:42 INFO] Mirror angle: 0
[Mirror 07:37:42 INFO] rotating to position Y
[Status 07:37:42 INFO] .SET file for ACQ96 ready
[Ingest 07:37:42 INFO] Starting acquisition
[Status 07:37:43 INFO] reading housekeeping
[Status 07:38:00 INFO] acquire complete
[Status 07:38:01 INFO] writing housekeeping
[Sequencer 07:38:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:38:01 INFO] incremented Y scene to 141 completed views
[Sequencer 07:38:01 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:38:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:38:01 INFO] incremented to [AERI set: name Z141, 6 scans, 0 angle, D16300 command] set
[sigmove 07:38:01 INFO] Y141.SIG(18)
[sigmove 07:38:01 DEBUG] transformed Y141Ma.SPC -> Y141MA.SPC
[sigmove 07:38:01 DEBUG] transformed Y141Mb.SPC -> Y141MB.SPC
[sigmove 07:38:01 DEBUG] transformed Y141Mc.SPC -> Y141MC.SPC
[sigmove 07:38:01 DEBUG] transformed Y141Md.SPC -> Y141MD.SPC
[sigmove 07:38:01 DEBUG] transformed Y141Me.SPC -> Y141ME.SPC
[sigmove 07:38:01 DEBUG] transformed Y141Mf.SPC -> Y141MF.SPC
[Status 07:38:01 INFO] data for Y141 transferred to science data processing
[Tidy 07:38:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:38:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:38:01 INFO] resetting WatchDogTimer
[Status 07:38:01 INFO] Starting Set [AERI set: name Z141, 6 scans, 0 angle, D16300 command]
[Ingest 07:38:01 INFO] Sending XML status message
[Status 07:38:01 INFO] Mirror angle: 0
[Mirror 07:38:01 INFO] rotating to position Z
[Status 07:38:01 INFO] .SET file for ACQ96 ready
[Ingest 07:38:01 INFO] Starting acquisition
[Status 07:38:02 INFO] reading housekeeping
[Status 07:38:19 INFO] acquire complete
[Status 07:38:20 INFO] writing housekeeping
[Sequencer 07:38:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:38:20 INFO] incremented Z scene to 141 completed views
[Sequencer 07:38:20 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:38:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:38:20 INFO] incremented to [AERI set: name A142, 6 scans, 120 angle, D28300 command] set
[sigmove 07:38:20 INFO] Z141.SIG(18)
[sigmove 07:38:20 DEBUG] transformed Z141Ma.SPC -> Z141MA.SPC
[sigmove 07:38:20 DEBUG] transformed Z141Mb.SPC -> Z141MB.SPC
[sigmove 07:38:20 DEBUG] transformed Z141Mc.SPC -> Z141MC.SPC
[sigmove 07:38:20 DEBUG] transformed Z141Md.SPC -> Z141MD.SPC
[sigmove 07:38:20 DEBUG] transformed Z141Me.SPC -> Z141ME.SPC
[sigmove 07:38:20 DEBUG] transformed Z141Mf.SPC -> Z141MF.SPC
[Status 07:38:20 INFO] data for Z141 transferred to science data processing
[Tidy 07:38:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:38:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:38:20 INFO] resetting WatchDogTimer
[Status 07:38:20 INFO] Starting Set [AERI set: name A142, 6 scans, 120 angle, D28300 command]
[Ingest 07:38:20 INFO] Sending XML status message
[Status 07:38:20 INFO] Mirror angle: 120
[Mirror 07:38:20 INFO] rotating to position A
[Status 07:38:21 INFO] .SET file for ACQ96 ready
[Ingest 07:38:22 INFO] Starting acquisition
[Status 07:38:22 INFO] reading housekeeping
[Status 07:38:39 INFO] acquire complete
[Status 07:38:40 INFO] writing housekeeping
[Sequencer 07:38:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:38:40 INFO] incremented A scene to 142 completed views
[Sequencer 07:38:40 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:38:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:38:40 INFO] incremented to [AERI set: name H142, 6 scans, 60 angle, D22500 command] set
[sigmove 07:38:40 INFO] A142.SIG(18)
[sigmove 07:38:40 DEBUG] transformed A142Ma.SPC -> A142MA.SPC
[sigmove 07:38:40 DEBUG] transformed A142Mb.SPC -> A142MB.SPC
[sigmove 07:38:40 DEBUG] transformed A142Mc.SPC -> A142MC.SPC
[sigmove 07:38:40 DEBUG] transformed A142Md.SPC -> A142MD.SPC
[sigmove 07:38:40 DEBUG] transformed A142Me.SPC -> A142ME.SPC
[sigmove 07:38:40 DEBUG] transformed A142Mf.SPC -> A142MF.SPC
[Status 07:38:40 INFO] data for A142 transferred to science data processing
[Tidy 07:38:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:38:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:38:40 INFO] resetting WatchDogTimer
[Status 07:38:40 INFO] Starting Set [AERI set: name H142, 6 scans, 60 angle, D22500 command]
[Ingest 07:38:40 INFO] Sending XML status message
[Status 07:38:40 INFO] Mirror angle: 60
[Mirror 07:38:40 INFO] rotating to position H
[Status 07:38:41 INFO] .SET file for ACQ96 ready
[Ingest 07:38:41 INFO] Starting acquisition
[Status 07:38:41 INFO] reading housekeeping
[Status 07:39:00 INFO] acquire complete
[Status 07:39:00 INFO] writing housekeeping
[Sequencer 07:39:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:39:00 INFO] incremented H scene to 142 completed views
[Sequencer 07:39:00 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:39:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:39:00 INFO] incremented to [AERI set: name S142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:39:00 INFO] H142.SIG(18)
[sigmove 07:39:00 DEBUG] transformed H142Ma.SPC -> H142MA.SPC
[sigmove 07:39:00 DEBUG] transformed H142Mb.SPC -> H142MB.SPC
[sigmove 07:39:00 DEBUG] transformed H142Mc.SPC -> H142MC.SPC
[sigmove 07:39:00 DEBUG] transformed H142Md.SPC -> H142MD.SPC
[sigmove 07:39:00 DEBUG] transformed H142Me.SPC -> H142ME.SPC
[sigmove 07:39:00 DEBUG] transformed H142Mf.SPC -> H142MF.SPC
[Status 07:39:00 INFO] data for H142 transferred to science data processing
[Tidy 07:39:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:39:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:39:00 INFO] resetting WatchDogTimer
[Status 07:39:00 INFO] Starting Set [AERI set: name S142, 6 scans, 0 angle, D16300 command]
[Ingest 07:39:00 INFO] Sending XML status message
[Status 07:39:00 INFO] Mirror angle: 0
[Mirror 07:39:00 INFO] rotating to position S
[Status 07:39:01 INFO] .SET file for ACQ96 ready
[Ingest 07:39:01 INFO] Starting acquisition
[Status 07:39:02 INFO] reading housekeeping
[Status 07:39:20 INFO] acquire complete
[Status 07:39:20 INFO] writing housekeeping
[Sequencer 07:39:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:39:20 INFO] incremented S scene to 142 completed views
[Sequencer 07:39:20 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:39:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:39:20 INFO] incremented to [AERI set: name T142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:39:20 INFO] S142.SIG(18)
[sigmove 07:39:20 DEBUG] transformed S142Ma.SPC -> S142MA.SPC
[sigmove 07:39:20 DEBUG] transformed S142Mb.SPC -> S142MB.SPC
[sigmove 07:39:20 DEBUG] transformed S142Mc.SPC -> S142MC.SPC
[sigmove 07:39:20 DEBUG] transformed S142Md.SPC -> S142MD.SPC
[sigmove 07:39:20 DEBUG] transformed S142Me.SPC -> S142ME.SPC
[sigmove 07:39:20 DEBUG] transformed S142Mf.SPC -> S142MF.SPC
[Status 07:39:20 INFO] data for S142 transferred to science data processing
[Tidy 07:39:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:39:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:39:20 INFO] resetting WatchDogTimer
[Status 07:39:21 INFO] Starting Set [AERI set: name T142, 6 scans, 0 angle, D16300 command]
[Ingest 07:39:21 INFO] Sending XML status message
[Status 07:39:21 INFO] Mirror angle: 0
[Mirror 07:39:21 INFO] rotating to position T
[Status 07:39:21 INFO] .SET file for ACQ96 ready
[Ingest 07:39:21 INFO] Starting acquisition
[Status 07:39:21 INFO] reading housekeeping
[Status 07:39:39 INFO] acquire complete
[Status 07:39:40 INFO] writing housekeeping
[Sequencer 07:39:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:39:40 INFO] incremented T scene to 142 completed views
[Sequencer 07:39:40 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:39:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:39:40 INFO] incremented to [AERI set: name U142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:39:40 INFO] T142.SIG(18)
[sigmove 07:39:40 DEBUG] transformed T142Ma.SPC -> T142MA.SPC
[sigmove 07:39:40 DEBUG] transformed T142Mb.SPC -> T142MB.SPC
[sigmove 07:39:40 DEBUG] transformed T142Mc.SPC -> T142MC.SPC
[sigmove 07:39:40 DEBUG] transformed T142Md.SPC -> T142MD.SPC
[sigmove 07:39:40 DEBUG] transformed T142Me.SPC -> T142ME.SPC
[sigmove 07:39:40 DEBUG] transformed T142Mf.SPC -> T142MF.SPC
[Status 07:39:40 INFO] data for T142 transferred to science data processing
[Tidy 07:39:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:39:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:39:40 INFO] resetting WatchDogTimer
[Status 07:39:40 INFO] Starting Set [AERI set: name U142, 6 scans, 0 angle, D16300 command]
[Ingest 07:39:40 INFO] Sending XML status message
[Status 07:39:40 INFO] Mirror angle: 0
[Mirror 07:39:40 INFO] rotating to position U
[Status 07:39:40 INFO] .SET file for ACQ96 ready
[Ingest 07:39:40 INFO] Starting acquisition
[Status 07:39:41 INFO] reading housekeeping
[Status 07:39:59 INFO] acquire complete
[Status 07:40:00 INFO] writing housekeeping
[Sequencer 07:40:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:40:00 INFO] incremented U scene to 142 completed views
[Sequencer 07:40:00 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:40:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:40:00 INFO] incremented to [AERI set: name V142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:40:00 INFO] U142.SIG(18)
[sigmove 07:40:00 DEBUG] transformed U142Ma.SPC -> U142MA.SPC
[sigmove 07:40:00 DEBUG] transformed U142Mb.SPC -> U142MB.SPC
[sigmove 07:40:00 DEBUG] transformed U142Mc.SPC -> U142MC.SPC
[sigmove 07:40:00 DEBUG] transformed U142Md.SPC -> U142MD.SPC
[sigmove 07:40:00 DEBUG] transformed U142Me.SPC -> U142ME.SPC
[sigmove 07:40:00 DEBUG] transformed U142Mf.SPC -> U142MF.SPC
[Status 07:40:00 INFO] data for U142 transferred to science data processing
[Tidy 07:40:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:40:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:40:00 INFO] resetting WatchDogTimer
[Status 07:40:00 INFO] Starting Set [AERI set: name V142, 6 scans, 0 angle, D16300 command]
[Ingest 07:40:00 INFO] Sending XML status message
[Status 07:40:00 INFO] Mirror angle: 0
[Mirror 07:40:00 INFO] rotating to position V
[Status 07:40:00 INFO] .SET file for ACQ96 ready
[Ingest 07:40:00 INFO] Starting acquisition
[Status 07:40:01 INFO] reading housekeeping
[Status 07:40:18 INFO] acquire complete
[Status 07:40:19 INFO] writing housekeeping
[Sequencer 07:40:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:40:19 INFO] incremented V scene to 142 completed views
[Sequencer 07:40:19 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:40:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:40:19 INFO] incremented to [AERI set: name W142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:40:19 INFO] V142.SIG(18)
[sigmove 07:40:19 DEBUG] transformed V142Ma.SPC -> V142MA.SPC
[sigmove 07:40:19 DEBUG] transformed V142Mb.SPC -> V142MB.SPC
[sigmove 07:40:19 DEBUG] transformed V142Mc.SPC -> V142MC.SPC
[sigmove 07:40:19 DEBUG] transformed V142Md.SPC -> V142MD.SPC
[sigmove 07:40:19 DEBUG] transformed V142Me.SPC -> V142ME.SPC
[sigmove 07:40:19 DEBUG] transformed V142Mf.SPC -> V142MF.SPC
[Status 07:40:19 INFO] data for V142 transferred to science data processing
[Tidy 07:40:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:40:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:40:19 INFO] resetting WatchDogTimer
[Status 07:40:19 INFO] Starting Set [AERI set: name W142, 6 scans, 0 angle, D16300 command]
[Ingest 07:40:19 INFO] Sending XML status message
[Status 07:40:19 INFO] Mirror angle: 0
[Mirror 07:40:19 INFO] rotating to position W
[Status 07:40:19 INFO] .SET file for ACQ96 ready
[Ingest 07:40:20 INFO] Starting acquisition
[Status 07:40:20 INFO] reading housekeeping
[Status 07:40:37 INFO] acquire complete
[Status 07:40:38 INFO] writing housekeeping
[Sequencer 07:40:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:40:38 INFO] incremented W scene to 142 completed views
[Sequencer 07:40:38 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:40:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:40:38 INFO] incremented to [AERI set: name X142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:40:38 INFO] W142.SIG(18)
[sigmove 07:40:38 DEBUG] transformed W142Ma.SPC -> W142MA.SPC
[sigmove 07:40:38 DEBUG] transformed W142Mb.SPC -> W142MB.SPC
[sigmove 07:40:38 DEBUG] transformed W142Mc.SPC -> W142MC.SPC
[sigmove 07:40:38 DEBUG] transformed W142Md.SPC -> W142MD.SPC
[sigmove 07:40:38 DEBUG] transformed W142Me.SPC -> W142ME.SPC
[sigmove 07:40:38 DEBUG] transformed W142Mf.SPC -> W142MF.SPC
[Status 07:40:38 INFO] data for W142 transferred to science data processing
[Tidy 07:40:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:40:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:40:38 INFO] resetting WatchDogTimer
[Status 07:40:38 INFO] Starting Set [AERI set: name X142, 6 scans, 0 angle, D16300 command]
[Ingest 07:40:38 INFO] Sending XML status message
[Status 07:40:38 INFO] Mirror angle: 0
[Mirror 07:40:38 INFO] rotating to position X
[Status 07:40:38 INFO] .SET file for ACQ96 ready
[Ingest 07:40:39 INFO] Starting acquisition
[Status 07:40:39 INFO] reading housekeeping
[Status 07:40:56 INFO] acquire complete
[Status 07:40:57 INFO] writing housekeeping
[Sequencer 07:40:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:40:57 INFO] incremented X scene to 142 completed views
[Sequencer 07:40:57 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:40:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:40:57 INFO] incremented to [AERI set: name Y142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:40:57 INFO] X142.SIG(18)
[sigmove 07:40:57 DEBUG] transformed X142Ma.SPC -> X142MA.SPC
[sigmove 07:40:57 DEBUG] transformed X142Mb.SPC -> X142MB.SPC
[sigmove 07:40:57 DEBUG] transformed X142Mc.SPC -> X142MC.SPC
[sigmove 07:40:57 DEBUG] transformed X142Md.SPC -> X142MD.SPC
[sigmove 07:40:57 DEBUG] transformed X142Me.SPC -> X142ME.SPC
[sigmove 07:40:57 DEBUG] transformed X142Mf.SPC -> X142MF.SPC
[Status 07:40:57 INFO] data for X142 transferred to science data processing
[Tidy 07:40:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:40:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:40:57 INFO] resetting WatchDogTimer
[Status 07:40:57 INFO] Starting Set [AERI set: name Y142, 6 scans, 0 angle, D16300 command]
[Ingest 07:40:57 INFO] Sending XML status message
[Status 07:40:57 INFO] Mirror angle: 0
[Mirror 07:40:57 INFO] rotating to position Y
[Status 07:40:58 INFO] .SET file for ACQ96 ready
[Ingest 07:40:58 INFO] Starting acquisition
[Status 07:40:58 INFO] reading housekeeping
[Status 07:41:15 INFO] acquire complete
[Status 07:41:16 INFO] writing housekeeping
[Sequencer 07:41:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:41:16 INFO] incremented Y scene to 142 completed views
[Sequencer 07:41:16 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:41:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:41:16 INFO] incremented to [AERI set: name Z142, 6 scans, 0 angle, D16300 command] set
[sigmove 07:41:16 INFO] Y142.SIG(18)
[sigmove 07:41:16 DEBUG] transformed Y142Ma.SPC -> Y142MA.SPC
[sigmove 07:41:16 DEBUG] transformed Y142Mb.SPC -> Y142MB.SPC
[sigmove 07:41:16 DEBUG] transformed Y142Mc.SPC -> Y142MC.SPC
[sigmove 07:41:16 DEBUG] transformed Y142Md.SPC -> Y142MD.SPC
[sigmove 07:41:16 DEBUG] transformed Y142Me.SPC -> Y142ME.SPC
[sigmove 07:41:16 DEBUG] transformed Y142Mf.SPC -> Y142MF.SPC
[Status 07:41:16 INFO] data for Y142 transferred to science data processing
[Tidy 07:41:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:41:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:41:16 INFO] resetting WatchDogTimer
[Status 07:41:16 INFO] Starting Set [AERI set: name Z142, 6 scans, 0 angle, D16300 command]
[Ingest 07:41:16 INFO] Sending XML status message
[Status 07:41:16 INFO] Mirror angle: 0
[Mirror 07:41:16 INFO] rotating to position Z
[Status 07:41:17 INFO] .SET file for ACQ96 ready
[Ingest 07:41:17 INFO] Starting acquisition
[Status 07:41:17 INFO] reading housekeeping
[Status 07:41:34 INFO] acquire complete
[Status 07:41:35 INFO] writing housekeeping
[Sequencer 07:41:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:41:35 INFO] incremented Z scene to 142 completed views
[Sequencer 07:41:35 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:41:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:41:35 INFO] incremented to [AERI set: name H143, 6 scans, 60 angle, D22500 command] set
[sigmove 07:41:35 INFO] Z142.SIG(18)
[sigmove 07:41:35 DEBUG] transformed Z142Ma.SPC -> Z142MA.SPC
[sigmove 07:41:35 DEBUG] transformed Z142Mb.SPC -> Z142MB.SPC
[sigmove 07:41:35 DEBUG] transformed Z142Mc.SPC -> Z142MC.SPC
[sigmove 07:41:35 DEBUG] transformed Z142Md.SPC -> Z142MD.SPC
[sigmove 07:41:35 DEBUG] transformed Z142Me.SPC -> Z142ME.SPC
[sigmove 07:41:35 DEBUG] transformed Z142Mf.SPC -> Z142MF.SPC
[Status 07:41:35 INFO] data for Z142 transferred to science data processing
[Tidy 07:41:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:41:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:41:35 INFO] resetting WatchDogTimer
[Status 07:41:35 INFO] Starting Set [AERI set: name H143, 6 scans, 60 angle, D22500 command]
[Ingest 07:41:35 INFO] Sending XML status message
[Status 07:41:35 INFO] Mirror angle: 60
[Mirror 07:41:35 INFO] rotating to position H
[Status 07:41:36 INFO] .SET file for ACQ96 ready
[Ingest 07:41:36 INFO] Starting acquisition
[Status 07:41:37 INFO] reading housekeeping
[Status 07:41:55 INFO] acquire complete
[Status 07:41:55 INFO] writing housekeeping
[Sequencer 07:41:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:41:55 INFO] incremented H scene to 143 completed views
[Sequencer 07:41:55 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:41:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:41:55 INFO] incremented to [AERI set: name A143, 6 scans, 120 angle, D28300 command] set
[sigmove 07:41:55 INFO] H143.SIG(18)
[sigmove 07:41:55 DEBUG] transformed H143Ma.SPC -> H143MA.SPC
[sigmove 07:41:55 DEBUG] transformed H143Mb.SPC -> H143MB.SPC
[sigmove 07:41:55 DEBUG] transformed H143Mc.SPC -> H143MC.SPC
[sigmove 07:41:55 DEBUG] transformed H143Md.SPC -> H143MD.SPC
[sigmove 07:41:55 DEBUG] transformed H143Me.SPC -> H143ME.SPC
[sigmove 07:41:55 DEBUG] transformed H143Mf.SPC -> H143MF.SPC
[Status 07:41:55 INFO] data for H143 transferred to science data processing
[Tidy 07:41:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:41:55 INFO] A141.FIN(19),H141.FIN(19),S141.FIN(19),T141.FIN(19),U141.FIN(19),V141.FIN(19),W141.FIN(19),X141.FIN(19),Y141.FIN(19),Z141.FIN(19),A142.FIN(19),H142.FIN(19),S142.FIN(19),T142.FIN(19),U142.FIN(19),V142.FIN(19),W142.FIN(19),X142.FIN(19),Y142.FIN(19),Z142.FIN(19)
[sigmove 07:41:55 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:41:55 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:41:58 DEBUG] done zipping
[WatchDog 07:41:58 INFO] resetting WatchDogTimer
[Status 07:41:58 INFO] Starting Set [AERI set: name A143, 6 scans, 120 angle, D28300 command]
[Ingest 07:41:58 INFO] Sending XML status message
[Status 07:41:58 INFO] Mirror angle: 120
[Mirror 07:41:58 INFO] rotating to position A
[Status 07:41:59 INFO] .SET file for ACQ96 ready
[Ingest 07:41:59 INFO] Starting acquisition
[Status 07:42:00 INFO] reading housekeeping
[Status 07:42:17 INFO] acquire complete
[Status 07:42:18 INFO] writing housekeeping
[Sequencer 07:42:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:42:18 INFO] incremented A scene to 143 completed views
[Sequencer 07:42:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:42:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:42:18 INFO] incremented to [AERI set: name S143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:42:18 INFO] A143.SIG(18)
[sigmove 07:42:18 DEBUG] transformed A143Ma.SPC -> A143MA.SPC
[sigmove 07:42:18 DEBUG] transformed A143Mb.SPC -> A143MB.SPC
[sigmove 07:42:18 DEBUG] transformed A143Mc.SPC -> A143MC.SPC
[sigmove 07:42:18 DEBUG] transformed A143Md.SPC -> A143MD.SPC
[sigmove 07:42:18 DEBUG] transformed A143Me.SPC -> A143ME.SPC
[sigmove 07:42:18 DEBUG] transformed A143Mf.SPC -> A143MF.SPC
[Status 07:42:18 INFO] data for A143 transferred to science data processing
[Tidy 07:42:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:42:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:42:18 INFO] resetting WatchDogTimer
[Status 07:42:18 INFO] Starting Set [AERI set: name S143, 6 scans, 0 angle, D16300 command]
[Ingest 07:42:18 INFO] Sending XML status message
[Status 07:42:18 INFO] Mirror angle: 0
[Mirror 07:42:18 INFO] rotating to position S
[Status 07:42:19 INFO] .SET file for ACQ96 ready
[Ingest 07:42:20 INFO] Starting acquisition
[Status 07:42:20 INFO] reading housekeeping
[Status 07:42:37 INFO] acquire complete
[Status 07:42:38 INFO] writing housekeeping
[Sequencer 07:42:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:42:38 INFO] incremented S scene to 143 completed views
[Sequencer 07:42:38 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:42:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:42:38 INFO] incremented to [AERI set: name T143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:42:38 INFO] S143.SIG(18)
[sigmove 07:42:38 DEBUG] transformed S143Ma.SPC -> S143MA.SPC
[sigmove 07:42:38 DEBUG] transformed S143Mb.SPC -> S143MB.SPC
[sigmove 07:42:38 DEBUG] transformed S143Mc.SPC -> S143MC.SPC
[sigmove 07:42:38 DEBUG] transformed S143Md.SPC -> S143MD.SPC
[sigmove 07:42:38 DEBUG] transformed S143Me.SPC -> S143ME.SPC
[sigmove 07:42:38 DEBUG] transformed S143Mf.SPC -> S143MF.SPC
[Status 07:42:38 INFO] data for S143 transferred to science data processing
[Tidy 07:42:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:42:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:42:38 INFO] resetting WatchDogTimer
[Status 07:42:38 INFO] Starting Set [AERI set: name T143, 6 scans, 0 angle, D16300 command]
[Ingest 07:42:38 INFO] Sending XML status message
[Status 07:42:38 INFO] Mirror angle: 0
[Mirror 07:42:38 INFO] rotating to position T
[Status 07:42:39 INFO] .SET file for ACQ96 ready
[Ingest 07:42:39 INFO] Starting acquisition
[Status 07:42:39 INFO] reading housekeeping
[Status 07:42:56 INFO] acquire complete
[Status 07:42:57 INFO] writing housekeeping
[Sequencer 07:42:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:42:57 INFO] incremented T scene to 143 completed views
[Sequencer 07:42:57 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:42:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:42:57 INFO] incremented to [AERI set: name U143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:42:57 INFO] T143.SIG(18)
[sigmove 07:42:57 DEBUG] transformed T143Ma.SPC -> T143MA.SPC
[sigmove 07:42:57 DEBUG] transformed T143Mb.SPC -> T143MB.SPC
[sigmove 07:42:57 DEBUG] transformed T143Mc.SPC -> T143MC.SPC
[sigmove 07:42:57 DEBUG] transformed T143Md.SPC -> T143MD.SPC
[sigmove 07:42:57 DEBUG] transformed T143Me.SPC -> T143ME.SPC
[sigmove 07:42:57 DEBUG] transformed T143Mf.SPC -> T143MF.SPC
[Status 07:42:57 INFO] data for T143 transferred to science data processing
[Tidy 07:42:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:42:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:42:57 INFO] resetting WatchDogTimer
[Status 07:42:57 INFO] Starting Set [AERI set: name U143, 6 scans, 0 angle, D16300 command]
[Ingest 07:42:57 INFO] Sending XML status message
[Status 07:42:57 INFO] Mirror angle: 0
[Mirror 07:42:57 INFO] rotating to position U
[Status 07:42:58 INFO] .SET file for ACQ96 ready
[Ingest 07:42:58 INFO] Starting acquisition
[Status 07:42:58 INFO] reading housekeeping
[Status 07:43:15 INFO] acquire complete
[Status 07:43:16 INFO] writing housekeeping
[Sequencer 07:43:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:43:16 INFO] incremented U scene to 143 completed views
[Sequencer 07:43:16 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:43:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:43:16 INFO] incremented to [AERI set: name V143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:43:16 INFO] U143.SIG(18)
[sigmove 07:43:16 DEBUG] transformed U143Ma.SPC -> U143MA.SPC
[sigmove 07:43:16 DEBUG] transformed U143Mb.SPC -> U143MB.SPC
[sigmove 07:43:16 DEBUG] transformed U143Mc.SPC -> U143MC.SPC
[sigmove 07:43:16 DEBUG] transformed U143Md.SPC -> U143MD.SPC
[sigmove 07:43:16 DEBUG] transformed U143Me.SPC -> U143ME.SPC
[sigmove 07:43:16 DEBUG] transformed U143Mf.SPC -> U143MF.SPC
[Status 07:43:16 INFO] data for U143 transferred to science data processing
[Tidy 07:43:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:43:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:43:16 INFO] resetting WatchDogTimer
[Status 07:43:16 INFO] Starting Set [AERI set: name V143, 6 scans, 0 angle, D16300 command]
[Ingest 07:43:16 INFO] Sending XML status message
[Status 07:43:16 INFO] Mirror angle: 0
[Mirror 07:43:16 INFO] rotating to position V
[Status 07:43:17 INFO] .SET file for ACQ96 ready
[Ingest 07:43:17 INFO] Starting acquisition
[Status 07:43:17 INFO] reading housekeeping
[Status 07:43:35 INFO] acquire complete
[Status 07:43:35 INFO] writing housekeeping
[Sequencer 07:43:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:43:35 INFO] incremented V scene to 143 completed views
[Sequencer 07:43:35 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:43:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:43:35 INFO] incremented to [AERI set: name W143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:43:35 INFO] V143.SIG(18)
[sigmove 07:43:35 DEBUG] transformed V143Ma.SPC -> V143MA.SPC
[sigmove 07:43:35 DEBUG] transformed V143Mb.SPC -> V143MB.SPC
[sigmove 07:43:35 DEBUG] transformed V143Mc.SPC -> V143MC.SPC
[sigmove 07:43:35 DEBUG] transformed V143Md.SPC -> V143MD.SPC
[sigmove 07:43:35 DEBUG] transformed V143Me.SPC -> V143ME.SPC
[sigmove 07:43:35 DEBUG] transformed V143Mf.SPC -> V143MF.SPC
[Status 07:43:35 INFO] data for V143 transferred to science data processing
[Tidy 07:43:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:43:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:43:35 INFO] resetting WatchDogTimer
[Status 07:43:35 INFO] Starting Set [AERI set: name W143, 6 scans, 0 angle, D16300 command]
[Ingest 07:43:35 INFO] Sending XML status message
[Status 07:43:35 INFO] Mirror angle: 0
[Mirror 07:43:36 INFO] rotating to position W
[Status 07:43:36 INFO] .SET file for ACQ96 ready
[Ingest 07:43:36 INFO] Starting acquisition
[Status 07:43:36 INFO] reading housekeeping
[Status 07:43:54 INFO] acquire complete
[Status 07:43:54 INFO] writing housekeeping
[Sequencer 07:43:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:43:54 INFO] incremented W scene to 143 completed views
[Sequencer 07:43:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:43:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:43:54 INFO] incremented to [AERI set: name X143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:43:54 INFO] W143.SIG(18)
[sigmove 07:43:54 DEBUG] transformed W143Ma.SPC -> W143MA.SPC
[sigmove 07:43:54 DEBUG] transformed W143Mb.SPC -> W143MB.SPC
[sigmove 07:43:54 DEBUG] transformed W143Mc.SPC -> W143MC.SPC
[sigmove 07:43:54 DEBUG] transformed W143Md.SPC -> W143MD.SPC
[sigmove 07:43:54 DEBUG] transformed W143Me.SPC -> W143ME.SPC
[sigmove 07:43:54 DEBUG] transformed W143Mf.SPC -> W143MF.SPC
[Status 07:43:54 INFO] data for W143 transferred to science data processing
[Tidy 07:43:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:43:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:43:54 INFO] resetting WatchDogTimer
[Status 07:43:54 INFO] Starting Set [AERI set: name X143, 6 scans, 0 angle, D16300 command]
[Ingest 07:43:54 INFO] Sending XML status message
[Status 07:43:54 INFO] Mirror angle: 0
[Mirror 07:43:55 INFO] rotating to position X
[Status 07:43:55 INFO] .SET file for ACQ96 ready
[Ingest 07:43:55 INFO] Starting acquisition
[Status 07:43:55 INFO] reading housekeeping
[Status 07:44:13 INFO] acquire complete
[Status 07:44:13 INFO] writing housekeeping
[Sequencer 07:44:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:44:13 INFO] incremented X scene to 143 completed views
[Sequencer 07:44:13 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:44:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:44:13 INFO] incremented to [AERI set: name Y143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:44:13 INFO] X143.SIG(18)
[sigmove 07:44:13 DEBUG] transformed X143Ma.SPC -> X143MA.SPC
[sigmove 07:44:13 DEBUG] transformed X143Mb.SPC -> X143MB.SPC
[sigmove 07:44:13 DEBUG] transformed X143Mc.SPC -> X143MC.SPC
[sigmove 07:44:13 DEBUG] transformed X143Md.SPC -> X143MD.SPC
[sigmove 07:44:13 DEBUG] transformed X143Me.SPC -> X143ME.SPC
[sigmove 07:44:13 DEBUG] transformed X143Mf.SPC -> X143MF.SPC
[Status 07:44:13 INFO] data for X143 transferred to science data processing
[Tidy 07:44:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:44:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:44:13 INFO] resetting WatchDogTimer
[Status 07:44:14 INFO] Starting Set [AERI set: name Y143, 6 scans, 0 angle, D16300 command]
[Ingest 07:44:14 INFO] Sending XML status message
[Status 07:44:14 INFO] Mirror angle: 0
[Mirror 07:44:14 INFO] rotating to position Y
[Status 07:44:14 INFO] .SET file for ACQ96 ready
[Ingest 07:44:14 INFO] Starting acquisition
[Status 07:44:14 INFO] reading housekeeping
[Status 07:44:32 INFO] acquire complete
[Status 07:44:32 INFO] writing housekeeping
[Sequencer 07:44:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:44:32 INFO] incremented Y scene to 143 completed views
[Sequencer 07:44:32 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:44:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:44:32 INFO] incremented to [AERI set: name Z143, 6 scans, 0 angle, D16300 command] set
[sigmove 07:44:32 INFO] Y143.SIG(18)
[sigmove 07:44:32 DEBUG] transformed Y143Ma.SPC -> Y143MA.SPC
[sigmove 07:44:32 DEBUG] transformed Y143Mb.SPC -> Y143MB.SPC
[sigmove 07:44:32 DEBUG] transformed Y143Mc.SPC -> Y143MC.SPC
[sigmove 07:44:32 DEBUG] transformed Y143Md.SPC -> Y143MD.SPC
[sigmove 07:44:32 DEBUG] transformed Y143Me.SPC -> Y143ME.SPC
[sigmove 07:44:32 DEBUG] transformed Y143Mf.SPC -> Y143MF.SPC
[Status 07:44:32 INFO] data for Y143 transferred to science data processing
[Tidy 07:44:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:44:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:44:32 INFO] resetting WatchDogTimer
[Status 07:44:33 INFO] Starting Set [AERI set: name Z143, 6 scans, 0 angle, D16300 command]
[Ingest 07:44:33 INFO] Sending XML status message
[Status 07:44:33 INFO] Mirror angle: 0
[Mirror 07:44:33 INFO] rotating to position Z
[Status 07:44:33 INFO] .SET file for ACQ96 ready
[Ingest 07:44:33 INFO] Starting acquisition
[Status 07:44:33 INFO] reading housekeeping
[Status 07:44:51 INFO] acquire complete
[Status 07:44:51 INFO] writing housekeeping
[Sequencer 07:44:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:44:51 INFO] incremented Z scene to 143 completed views
[Sequencer 07:44:51 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:44:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:44:51 INFO] incremented to [AERI set: name A144, 6 scans, 120 angle, D28300 command] set
[sigmove 07:44:52 INFO] Z143.SIG(18)
[sigmove 07:44:52 DEBUG] transformed Z143Ma.SPC -> Z143MA.SPC
[sigmove 07:44:52 DEBUG] transformed Z143Mb.SPC -> Z143MB.SPC
[sigmove 07:44:52 DEBUG] transformed Z143Mc.SPC -> Z143MC.SPC
[sigmove 07:44:52 DEBUG] transformed Z143Md.SPC -> Z143MD.SPC
[sigmove 07:44:52 DEBUG] transformed Z143Me.SPC -> Z143ME.SPC
[sigmove 07:44:52 DEBUG] transformed Z143Mf.SPC -> Z143MF.SPC
[Status 07:44:52 INFO] data for Z143 transferred to science data processing
[Tidy 07:44:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:44:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:44:52 INFO] resetting WatchDogTimer
[Status 07:44:52 INFO] Starting Set [AERI set: name A144, 6 scans, 120 angle, D28300 command]
[Ingest 07:44:52 INFO] Sending XML status message
[Status 07:44:52 INFO] Mirror angle: 120
[Mirror 07:44:52 INFO] rotating to position A
[Status 07:44:53 INFO] .SET file for ACQ96 ready
[Ingest 07:44:53 INFO] Starting acquisition
[Status 07:44:54 INFO] reading housekeeping
[Status 07:45:11 INFO] acquire complete
[Status 07:45:12 INFO] writing housekeeping
[Sequencer 07:45:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:45:12 INFO] incremented A scene to 144 completed views
[Sequencer 07:45:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:45:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:45:12 INFO] incremented to [AERI set: name H144, 6 scans, 60 angle, D22500 command] set
[sigmove 07:45:12 INFO] A144.SIG(18)
[sigmove 07:45:12 DEBUG] transformed A144Ma.SPC -> A144MA.SPC
[sigmove 07:45:12 DEBUG] transformed A144Mb.SPC -> A144MB.SPC
[sigmove 07:45:12 DEBUG] transformed A144Mc.SPC -> A144MC.SPC
[sigmove 07:45:12 DEBUG] transformed A144Md.SPC -> A144MD.SPC
[sigmove 07:45:12 DEBUG] transformed A144Me.SPC -> A144ME.SPC
[sigmove 07:45:12 DEBUG] transformed A144Mf.SPC -> A144MF.SPC
[Status 07:45:12 INFO] data for A144 transferred to science data processing
[Tidy 07:45:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:45:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:45:12 INFO] resetting WatchDogTimer
[Status 07:45:12 INFO] Starting Set [AERI set: name H144, 6 scans, 60 angle, D22500 command]
[Ingest 07:45:12 INFO] Sending XML status message
[Status 07:45:12 INFO] Mirror angle: 60
[Mirror 07:45:12 INFO] rotating to position H
[Status 07:45:13 INFO] .SET file for ACQ96 ready
[Ingest 07:45:13 INFO] Starting acquisition
[Status 07:45:13 INFO] reading housekeeping
[Status 07:45:31 INFO] acquire complete
[Status 07:45:32 INFO] writing housekeeping
[Sequencer 07:45:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:45:32 INFO] incremented H scene to 144 completed views
[Sequencer 07:45:32 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:45:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:45:32 INFO] incremented to [AERI set: name S144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:45:32 INFO] H144.SIG(18)
[sigmove 07:45:32 DEBUG] transformed H144Ma.SPC -> H144MA.SPC
[sigmove 07:45:32 DEBUG] transformed H144Mb.SPC -> H144MB.SPC
[sigmove 07:45:32 DEBUG] transformed H144Mc.SPC -> H144MC.SPC
[sigmove 07:45:32 DEBUG] transformed H144Md.SPC -> H144MD.SPC
[sigmove 07:45:32 DEBUG] transformed H144Me.SPC -> H144ME.SPC
[sigmove 07:45:32 DEBUG] transformed H144Mf.SPC -> H144MF.SPC
[Status 07:45:32 INFO] data for H144 transferred to science data processing
[Tidy 07:45:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:45:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:45:32 INFO] resetting WatchDogTimer
[Status 07:45:32 INFO] Starting Set [AERI set: name S144, 6 scans, 0 angle, D16300 command]
[Ingest 07:45:32 INFO] Sending XML status message
[Status 07:45:32 INFO] Mirror angle: 0
[Mirror 07:45:32 INFO] rotating to position S
[Status 07:45:33 INFO] .SET file for ACQ96 ready
[Ingest 07:45:33 INFO] Starting acquisition
[Status 07:45:33 INFO] reading housekeeping
[Status 07:45:52 INFO] acquire complete
[Status 07:45:52 INFO] writing housekeeping
[Sequencer 07:45:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:45:52 INFO] incremented S scene to 144 completed views
[Sequencer 07:45:52 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:45:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:45:52 INFO] incremented to [AERI set: name T144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:45:52 INFO] S144.SIG(18)
[sigmove 07:45:52 DEBUG] transformed S144Ma.SPC -> S144MA.SPC
[sigmove 07:45:52 DEBUG] transformed S144Mb.SPC -> S144MB.SPC
[sigmove 07:45:52 DEBUG] transformed S144Mc.SPC -> S144MC.SPC
[sigmove 07:45:52 DEBUG] transformed S144Md.SPC -> S144MD.SPC
[sigmove 07:45:52 DEBUG] transformed S144Me.SPC -> S144ME.SPC
[sigmove 07:45:52 DEBUG] transformed S144Mf.SPC -> S144MF.SPC
[Status 07:45:52 INFO] data for S144 transferred to science data processing
[Tidy 07:45:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:45:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:45:52 INFO] resetting WatchDogTimer
[Status 07:45:52 INFO] Starting Set [AERI set: name T144, 6 scans, 0 angle, D16300 command]
[Ingest 07:45:52 INFO] Sending XML status message
[Status 07:45:52 INFO] Mirror angle: 0
[Mirror 07:45:52 INFO] rotating to position T
[Status 07:45:53 INFO] .SET file for ACQ96 ready
[Ingest 07:45:53 INFO] Starting acquisition
[Status 07:45:54 INFO] reading housekeeping
[Status 07:46:11 INFO] acquire complete
[Status 07:46:11 INFO] writing housekeeping
[Sequencer 07:46:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:46:11 INFO] incremented T scene to 144 completed views
[Sequencer 07:46:11 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:46:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:46:11 INFO] incremented to [AERI set: name U144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:46:11 INFO] T144.SIG(18)
[sigmove 07:46:11 DEBUG] transformed T144Ma.SPC -> T144MA.SPC
[sigmove 07:46:11 DEBUG] transformed T144Mb.SPC -> T144MB.SPC
[sigmove 07:46:11 DEBUG] transformed T144Mc.SPC -> T144MC.SPC
[sigmove 07:46:11 DEBUG] transformed T144Md.SPC -> T144MD.SPC
[sigmove 07:46:11 DEBUG] transformed T144Me.SPC -> T144ME.SPC
[sigmove 07:46:11 DEBUG] transformed T144Mf.SPC -> T144MF.SPC
[Status 07:46:11 INFO] data for T144 transferred to science data processing
[Tidy 07:46:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:46:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:46:11 INFO] resetting WatchDogTimer
[Status 07:46:12 INFO] Starting Set [AERI set: name U144, 6 scans, 0 angle, D16300 command]
[Ingest 07:46:12 INFO] Sending XML status message
[Status 07:46:12 INFO] Mirror angle: 0
[Mirror 07:46:12 INFO] rotating to position U
[Status 07:46:12 INFO] .SET file for ACQ96 ready
[Ingest 07:46:12 INFO] Starting acquisition
[Status 07:46:12 INFO] reading housekeeping
[Status 07:46:31 INFO] acquire complete
[Status 07:46:31 INFO] writing housekeeping
[Sequencer 07:46:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:46:31 INFO] incremented U scene to 144 completed views
[Sequencer 07:46:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:46:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:46:31 INFO] incremented to [AERI set: name V144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:46:31 INFO] U144.SIG(18)
[sigmove 07:46:31 DEBUG] transformed U144Ma.SPC -> U144MA.SPC
[sigmove 07:46:31 DEBUG] transformed U144Mb.SPC -> U144MB.SPC
[sigmove 07:46:31 DEBUG] transformed U144Mc.SPC -> U144MC.SPC
[sigmove 07:46:31 DEBUG] transformed U144Md.SPC -> U144MD.SPC
[sigmove 07:46:31 DEBUG] transformed U144Me.SPC -> U144ME.SPC
[sigmove 07:46:31 DEBUG] transformed U144Mf.SPC -> U144MF.SPC
[Status 07:46:31 INFO] data for U144 transferred to science data processing
[Tidy 07:46:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:46:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:46:31 INFO] resetting WatchDogTimer
[Status 07:46:32 INFO] Starting Set [AERI set: name V144, 6 scans, 0 angle, D16300 command]
[Ingest 07:46:32 INFO] Sending XML status message
[Status 07:46:32 INFO] Mirror angle: 0
[Mirror 07:46:32 INFO] rotating to position V
[Status 07:46:32 INFO] .SET file for ACQ96 ready
[Ingest 07:46:32 INFO] Starting acquisition
[Status 07:46:32 INFO] reading housekeeping
[Status 07:46:50 INFO] acquire complete
[Status 07:46:50 INFO] writing housekeeping
[Sequencer 07:46:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:46:50 INFO] incremented V scene to 144 completed views
[Sequencer 07:46:50 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:46:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:46:50 INFO] incremented to [AERI set: name W144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:46:50 INFO] V144.SIG(18)
[sigmove 07:46:50 DEBUG] transformed V144Ma.SPC -> V144MA.SPC
[sigmove 07:46:50 DEBUG] transformed V144Mb.SPC -> V144MB.SPC
[sigmove 07:46:50 DEBUG] transformed V144Mc.SPC -> V144MC.SPC
[sigmove 07:46:50 DEBUG] transformed V144Md.SPC -> V144MD.SPC
[sigmove 07:46:50 DEBUG] transformed V144Me.SPC -> V144ME.SPC
[sigmove 07:46:50 DEBUG] transformed V144Mf.SPC -> V144MF.SPC
[Status 07:46:50 INFO] data for V144 transferred to science data processing
[Tidy 07:46:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:46:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:46:50 INFO] resetting WatchDogTimer
[Status 07:46:51 INFO] Starting Set [AERI set: name W144, 6 scans, 0 angle, D16300 command]
[Ingest 07:46:51 INFO] Sending XML status message
[Status 07:46:51 INFO] Mirror angle: 0
[Mirror 07:46:51 INFO] rotating to position W
[Status 07:46:51 INFO] .SET file for ACQ96 ready
[Ingest 07:46:51 INFO] Starting acquisition
[Status 07:46:51 INFO] reading housekeeping
[Status 07:47:09 INFO] acquire complete
[Status 07:47:10 INFO] writing housekeeping
[Sequencer 07:47:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:47:10 INFO] incremented W scene to 144 completed views
[Sequencer 07:47:10 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:47:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:47:10 INFO] incremented to [AERI set: name X144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:47:10 INFO] W144.SIG(18)
[sigmove 07:47:10 DEBUG] transformed W144Ma.SPC -> W144MA.SPC
[sigmove 07:47:10 DEBUG] transformed W144Mb.SPC -> W144MB.SPC
[sigmove 07:47:10 DEBUG] transformed W144Mc.SPC -> W144MC.SPC
[sigmove 07:47:10 DEBUG] transformed W144Md.SPC -> W144MD.SPC
[sigmove 07:47:10 DEBUG] transformed W144Me.SPC -> W144ME.SPC
[sigmove 07:47:10 DEBUG] transformed W144Mf.SPC -> W144MF.SPC
[Status 07:47:10 INFO] data for W144 transferred to science data processing
[Tidy 07:47:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:47:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:47:10 INFO] resetting WatchDogTimer
[Status 07:47:10 INFO] Starting Set [AERI set: name X144, 6 scans, 0 angle, D16300 command]
[Ingest 07:47:10 INFO] Sending XML status message
[Status 07:47:10 INFO] Mirror angle: 0
[Mirror 07:47:10 INFO] rotating to position X
[Status 07:47:10 INFO] .SET file for ACQ96 ready
[Ingest 07:47:10 INFO] Starting acquisition
[Status 07:47:11 INFO] reading housekeeping
[Status 07:47:28 INFO] acquire complete
[Status 07:47:29 INFO] writing housekeeping
[Sequencer 07:47:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:47:29 INFO] incremented X scene to 144 completed views
[Sequencer 07:47:29 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:47:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:47:29 INFO] incremented to [AERI set: name Y144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:47:29 INFO] X144.SIG(18)
[sigmove 07:47:29 DEBUG] transformed X144Ma.SPC -> X144MA.SPC
[sigmove 07:47:29 DEBUG] transformed X144Mb.SPC -> X144MB.SPC
[sigmove 07:47:29 DEBUG] transformed X144Mc.SPC -> X144MC.SPC
[sigmove 07:47:29 DEBUG] transformed X144Md.SPC -> X144MD.SPC
[sigmove 07:47:29 DEBUG] transformed X144Me.SPC -> X144ME.SPC
[sigmove 07:47:29 DEBUG] transformed X144Mf.SPC -> X144MF.SPC
[Status 07:47:29 INFO] data for X144 transferred to science data processing
[Tidy 07:47:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:47:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:47:29 INFO] resetting WatchDogTimer
[Status 07:47:29 INFO] Starting Set [AERI set: name Y144, 6 scans, 0 angle, D16300 command]
[Ingest 07:47:29 INFO] Sending XML status message
[Status 07:47:29 INFO] Mirror angle: 0
[Mirror 07:47:29 INFO] rotating to position Y
[Status 07:47:29 INFO] .SET file for ACQ96 ready
[Ingest 07:47:29 INFO] Starting acquisition
[Status 07:47:30 INFO] reading housekeeping
[Status 07:47:47 INFO] acquire complete
[Status 07:47:48 INFO] writing housekeeping
[Sequencer 07:47:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:47:48 INFO] incremented Y scene to 144 completed views
[Sequencer 07:47:48 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:47:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:47:48 INFO] incremented to [AERI set: name Z144, 6 scans, 0 angle, D16300 command] set
[sigmove 07:47:48 INFO] Y144.SIG(18)
[sigmove 07:47:48 DEBUG] transformed Y144Ma.SPC -> Y144MA.SPC
[sigmove 07:47:48 DEBUG] transformed Y144Mb.SPC -> Y144MB.SPC
[sigmove 07:47:48 DEBUG] transformed Y144Mc.SPC -> Y144MC.SPC
[sigmove 07:47:48 DEBUG] transformed Y144Md.SPC -> Y144MD.SPC
[sigmove 07:47:48 DEBUG] transformed Y144Me.SPC -> Y144ME.SPC
[sigmove 07:47:48 DEBUG] transformed Y144Mf.SPC -> Y144MF.SPC
[Status 07:47:48 INFO] data for Y144 transferred to science data processing
[Tidy 07:47:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:47:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:47:48 INFO] resetting WatchDogTimer
[Status 07:47:48 INFO] Starting Set [AERI set: name Z144, 6 scans, 0 angle, D16300 command]
[Ingest 07:47:48 INFO] Sending XML status message
[Status 07:47:48 INFO] Mirror angle: 0
[Mirror 07:47:48 INFO] rotating to position Z
[Status 07:47:48 INFO] .SET file for ACQ96 ready
[Ingest 07:47:49 INFO] Starting acquisition
[Status 07:47:49 INFO] reading housekeeping
[Status 07:48:06 INFO] acquire complete
[Status 07:48:07 INFO] writing housekeeping
[Sequencer 07:48:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:48:07 INFO] incremented Z scene to 144 completed views
[Sequencer 07:48:07 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:48:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:48:07 INFO] incremented to [AERI set: name H145, 6 scans, 60 angle, D22500 command] set
[sigmove 07:48:07 INFO] Z144.SIG(18)
[sigmove 07:48:07 DEBUG] transformed Z144Ma.SPC -> Z144MA.SPC
[sigmove 07:48:07 DEBUG] transformed Z144Mb.SPC -> Z144MB.SPC
[sigmove 07:48:07 DEBUG] transformed Z144Mc.SPC -> Z144MC.SPC
[sigmove 07:48:07 DEBUG] transformed Z144Md.SPC -> Z144MD.SPC
[sigmove 07:48:07 DEBUG] transformed Z144Me.SPC -> Z144ME.SPC
[sigmove 07:48:07 DEBUG] transformed Z144Mf.SPC -> Z144MF.SPC
[Status 07:48:07 INFO] data for Z144 transferred to science data processing
[Tidy 07:48:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:48:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:48:07 INFO] resetting WatchDogTimer
[Status 07:48:07 INFO] Starting Set [AERI set: name H145, 6 scans, 60 angle, D22500 command]
[Ingest 07:48:07 INFO] Sending XML status message
[Status 07:48:07 INFO] Mirror angle: 60
[Mirror 07:48:07 INFO] rotating to position H
[Status 07:48:08 INFO] .SET file for ACQ96 ready
[Ingest 07:48:08 INFO] Starting acquisition
[Status 07:48:08 INFO] reading housekeeping
[Status 07:48:26 INFO] acquire complete
[Status 07:48:27 INFO] writing housekeeping
[Sequencer 07:48:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:48:27 INFO] incremented H scene to 145 completed views
[Sequencer 07:48:27 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:48:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:48:27 INFO] incremented to [AERI set: name A145, 6 scans, 120 angle, D28300 command] set
[sigmove 07:48:27 INFO] H145.SIG(18)
[sigmove 07:48:27 DEBUG] transformed H145Ma.SPC -> H145MA.SPC
[sigmove 07:48:27 DEBUG] transformed H145Mb.SPC -> H145MB.SPC
[sigmove 07:48:27 DEBUG] transformed H145Mc.SPC -> H145MC.SPC
[sigmove 07:48:27 DEBUG] transformed H145Md.SPC -> H145MD.SPC
[sigmove 07:48:27 DEBUG] transformed H145Me.SPC -> H145ME.SPC
[sigmove 07:48:27 DEBUG] transformed H145Mf.SPC -> H145MF.SPC
[Status 07:48:27 INFO] data for H145 transferred to science data processing
[Tidy 07:48:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:48:27 INFO] A143.FIN(19),H143.FIN(19),S143.FIN(19),T143.FIN(19),U143.FIN(19),V143.FIN(19),W143.FIN(19),X143.FIN(19),Y143.FIN(19),Z143.FIN(19),A144.FIN(19),H144.FIN(19),S144.FIN(19),T144.FIN(19),U144.FIN(19),V144.FIN(19),W144.FIN(19),X144.FIN(19),Y144.FIN(19),Z144.FIN(19)
[sigmove 07:48:27 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:48:27 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:48:30 DEBUG] done zipping
[WatchDog 07:48:30 INFO] resetting WatchDogTimer
[Status 07:48:30 INFO] Starting Set [AERI set: name A145, 6 scans, 120 angle, D28300 command]
[Ingest 07:48:30 INFO] Sending XML status message
[Status 07:48:30 INFO] Mirror angle: 120
[Mirror 07:48:30 INFO] rotating to position A
[Status 07:48:31 INFO] .SET file for ACQ96 ready
[Ingest 07:48:31 INFO] Starting acquisition
[Status 07:48:32 INFO] reading housekeeping
[Status 07:48:50 INFO] acquire complete
[Status 07:48:51 INFO] writing housekeeping
[Sequencer 07:48:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:48:51 INFO] incremented A scene to 145 completed views
[Sequencer 07:48:51 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:48:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:48:51 INFO] incremented to [AERI set: name S145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:48:51 INFO] A145.SIG(18)
[sigmove 07:48:51 DEBUG] transformed A145Ma.SPC -> A145MA.SPC
[sigmove 07:48:51 DEBUG] transformed A145Mb.SPC -> A145MB.SPC
[sigmove 07:48:51 DEBUG] transformed A145Mc.SPC -> A145MC.SPC
[sigmove 07:48:51 DEBUG] transformed A145Md.SPC -> A145MD.SPC
[sigmove 07:48:51 DEBUG] transformed A145Me.SPC -> A145ME.SPC
[sigmove 07:48:51 DEBUG] transformed A145Mf.SPC -> A145MF.SPC
[Status 07:48:51 INFO] data for A145 transferred to science data processing
[Tidy 07:48:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:48:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:48:51 INFO] resetting WatchDogTimer
[Status 07:48:51 INFO] Starting Set [AERI set: name S145, 6 scans, 0 angle, D16300 command]
[Ingest 07:48:51 INFO] Sending XML status message
[Status 07:48:51 INFO] Mirror angle: 0
[Mirror 07:48:51 INFO] rotating to position S
[Status 07:48:52 INFO] .SET file for ACQ96 ready
[Ingest 07:48:53 INFO] Starting acquisition
[Status 07:48:53 INFO] reading housekeeping
[Status 07:49:10 INFO] acquire complete
[Status 07:49:11 INFO] writing housekeeping
[Sequencer 07:49:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:49:11 INFO] incremented S scene to 145 completed views
[Sequencer 07:49:11 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:49:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:49:11 INFO] incremented to [AERI set: name T145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:49:11 INFO] S145.SIG(18)
[sigmove 07:49:11 DEBUG] transformed S145Ma.SPC -> S145MA.SPC
[sigmove 07:49:11 DEBUG] transformed S145Mb.SPC -> S145MB.SPC
[sigmove 07:49:11 DEBUG] transformed S145Mc.SPC -> S145MC.SPC
[sigmove 07:49:11 DEBUG] transformed S145Md.SPC -> S145MD.SPC
[sigmove 07:49:11 DEBUG] transformed S145Me.SPC -> S145ME.SPC
[sigmove 07:49:11 DEBUG] transformed S145Mf.SPC -> S145MF.SPC
[Status 07:49:11 INFO] data for S145 transferred to science data processing
[Tidy 07:49:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:49:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:49:11 INFO] resetting WatchDogTimer
[Status 07:49:11 INFO] Starting Set [AERI set: name T145, 6 scans, 0 angle, D16300 command]
[Ingest 07:49:11 INFO] Sending XML status message
[Status 07:49:11 INFO] Mirror angle: 0
[Mirror 07:49:11 INFO] rotating to position T
[Status 07:49:12 INFO] .SET file for ACQ96 ready
[Ingest 07:49:12 INFO] Starting acquisition
[Status 07:49:12 INFO] reading housekeeping
[Status 07:49:30 INFO] acquire complete
[Status 07:49:31 INFO] writing housekeeping
[Sequencer 07:49:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:49:31 INFO] incremented T scene to 145 completed views
[Sequencer 07:49:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:49:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:49:31 INFO] incremented to [AERI set: name U145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:49:31 INFO] T145.SIG(18)
[sigmove 07:49:31 DEBUG] transformed T145Ma.SPC -> T145MA.SPC
[sigmove 07:49:31 DEBUG] transformed T145Mb.SPC -> T145MB.SPC
[sigmove 07:49:31 DEBUG] transformed T145Mc.SPC -> T145MC.SPC
[sigmove 07:49:31 DEBUG] transformed T145Md.SPC -> T145MD.SPC
[sigmove 07:49:31 DEBUG] transformed T145Me.SPC -> T145ME.SPC
[sigmove 07:49:31 DEBUG] transformed T145Mf.SPC -> T145MF.SPC
[Status 07:49:31 INFO] data for T145 transferred to science data processing
[Tidy 07:49:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:49:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:49:31 INFO] resetting WatchDogTimer
[Status 07:49:31 INFO] Starting Set [AERI set: name U145, 6 scans, 0 angle, D16300 command]
[Ingest 07:49:31 INFO] Sending XML status message
[Status 07:49:31 INFO] Mirror angle: 0
[Mirror 07:49:31 INFO] rotating to position U
[Status 07:49:32 INFO] .SET file for ACQ96 ready
[Ingest 07:49:32 INFO] Starting acquisition
[Status 07:49:32 INFO] reading housekeeping
[Status 07:49:49 INFO] acquire complete
[Status 07:49:50 INFO] writing housekeeping
[Sequencer 07:49:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:49:50 INFO] incremented U scene to 145 completed views
[Sequencer 07:49:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:49:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:49:50 INFO] incremented to [AERI set: name V145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:49:50 INFO] U145.SIG(18)
[sigmove 07:49:50 DEBUG] transformed U145Ma.SPC -> U145MA.SPC
[sigmove 07:49:50 DEBUG] transformed U145Mb.SPC -> U145MB.SPC
[sigmove 07:49:50 DEBUG] transformed U145Mc.SPC -> U145MC.SPC
[sigmove 07:49:50 DEBUG] transformed U145Md.SPC -> U145MD.SPC
[sigmove 07:49:50 DEBUG] transformed U145Me.SPC -> U145ME.SPC
[sigmove 07:49:50 DEBUG] transformed U145Mf.SPC -> U145MF.SPC
[Status 07:49:50 INFO] data for U145 transferred to science data processing
[Tidy 07:49:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:49:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:49:50 INFO] resetting WatchDogTimer
[Status 07:49:50 INFO] Starting Set [AERI set: name V145, 6 scans, 0 angle, D16300 command]
[Ingest 07:49:50 INFO] Sending XML status message
[Status 07:49:50 INFO] Mirror angle: 0
[Mirror 07:49:51 INFO] rotating to position V
[Status 07:49:51 INFO] .SET file for ACQ96 ready
[Ingest 07:49:51 INFO] Starting acquisition
[Status 07:49:51 INFO] reading housekeeping
[Status 07:50:09 INFO] acquire complete
[Status 07:50:09 INFO] writing housekeeping
[Sequencer 07:50:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:50:09 INFO] incremented V scene to 145 completed views
[Sequencer 07:50:09 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:50:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:50:09 INFO] incremented to [AERI set: name W145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:50:09 INFO] V145.SIG(18)
[sigmove 07:50:09 DEBUG] transformed V145Ma.SPC -> V145MA.SPC
[sigmove 07:50:09 DEBUG] transformed V145Mb.SPC -> V145MB.SPC
[sigmove 07:50:09 DEBUG] transformed V145Mc.SPC -> V145MC.SPC
[sigmove 07:50:09 DEBUG] transformed V145Md.SPC -> V145MD.SPC
[sigmove 07:50:09 DEBUG] transformed V145Me.SPC -> V145ME.SPC
[sigmove 07:50:09 DEBUG] transformed V145Mf.SPC -> V145MF.SPC
[Status 07:50:09 INFO] data for V145 transferred to science data processing
[Tidy 07:50:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:50:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:50:09 INFO] resetting WatchDogTimer
[Status 07:50:09 INFO] Starting Set [AERI set: name W145, 6 scans, 0 angle, D16300 command]
[Ingest 07:50:09 INFO] Sending XML status message
[Status 07:50:09 INFO] Mirror angle: 0
[Mirror 07:50:10 INFO] rotating to position W
[Status 07:50:10 INFO] .SET file for ACQ96 ready
[Ingest 07:50:10 INFO] Starting acquisition
[Status 07:50:10 INFO] reading housekeeping
[Status 07:50:28 INFO] acquire complete
[Status 07:50:28 INFO] writing housekeeping
[Sequencer 07:50:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:50:28 INFO] incremented W scene to 145 completed views
[Sequencer 07:50:28 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:50:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:50:28 INFO] incremented to [AERI set: name X145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:50:28 INFO] W145.SIG(18)
[sigmove 07:50:28 DEBUG] transformed W145Ma.SPC -> W145MA.SPC
[sigmove 07:50:28 DEBUG] transformed W145Mb.SPC -> W145MB.SPC
[sigmove 07:50:28 DEBUG] transformed W145Mc.SPC -> W145MC.SPC
[sigmove 07:50:28 DEBUG] transformed W145Md.SPC -> W145MD.SPC
[sigmove 07:50:28 DEBUG] transformed W145Me.SPC -> W145ME.SPC
[sigmove 07:50:28 DEBUG] transformed W145Mf.SPC -> W145MF.SPC
[Status 07:50:28 INFO] data for W145 transferred to science data processing
[Tidy 07:50:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:50:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:50:28 INFO] resetting WatchDogTimer
[Status 07:50:28 INFO] Starting Set [AERI set: name X145, 6 scans, 0 angle, D16300 command]
[Ingest 07:50:28 INFO] Sending XML status message
[Status 07:50:29 INFO] Mirror angle: 0
[Mirror 07:50:29 INFO] rotating to position X
[Status 07:50:29 INFO] .SET file for ACQ96 ready
[Ingest 07:50:29 INFO] Starting acquisition
[Status 07:50:29 INFO] reading housekeeping
[Status 07:50:47 INFO] acquire complete
[Status 07:50:47 INFO] writing housekeeping
[Sequencer 07:50:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:50:47 INFO] incremented X scene to 145 completed views
[Sequencer 07:50:47 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:50:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:50:47 INFO] incremented to [AERI set: name Y145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:50:47 INFO] X145.SIG(18)
[sigmove 07:50:47 DEBUG] transformed X145Ma.SPC -> X145MA.SPC
[sigmove 07:50:47 DEBUG] transformed X145Mb.SPC -> X145MB.SPC
[sigmove 07:50:47 DEBUG] transformed X145Mc.SPC -> X145MC.SPC
[sigmove 07:50:47 DEBUG] transformed X145Md.SPC -> X145MD.SPC
[sigmove 07:50:47 DEBUG] transformed X145Me.SPC -> X145ME.SPC
[sigmove 07:50:47 DEBUG] transformed X145Mf.SPC -> X145MF.SPC
[Status 07:50:47 INFO] data for X145 transferred to science data processing
[Tidy 07:50:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:50:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:50:47 INFO] resetting WatchDogTimer
[Status 07:50:48 INFO] Starting Set [AERI set: name Y145, 6 scans, 0 angle, D16300 command]
[Ingest 07:50:48 INFO] Sending XML status message
[Status 07:50:48 INFO] Mirror angle: 0
[Mirror 07:50:48 INFO] rotating to position Y
[Status 07:50:48 INFO] .SET file for ACQ96 ready
[Ingest 07:50:48 INFO] Starting acquisition
[Status 07:50:48 INFO] reading housekeeping
[Status 07:51:06 INFO] acquire complete
[Status 07:51:06 INFO] writing housekeeping
[Sequencer 07:51:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:51:06 INFO] incremented Y scene to 145 completed views
[Sequencer 07:51:06 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:51:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:51:06 INFO] incremented to [AERI set: name Z145, 6 scans, 0 angle, D16300 command] set
[sigmove 07:51:06 INFO] Y145.SIG(18)
[sigmove 07:51:06 DEBUG] transformed Y145Ma.SPC -> Y145MA.SPC
[sigmove 07:51:06 DEBUG] transformed Y145Mb.SPC -> Y145MB.SPC
[sigmove 07:51:06 DEBUG] transformed Y145Mc.SPC -> Y145MC.SPC
[sigmove 07:51:06 DEBUG] transformed Y145Md.SPC -> Y145MD.SPC
[sigmove 07:51:06 DEBUG] transformed Y145Me.SPC -> Y145ME.SPC
[sigmove 07:51:06 DEBUG] transformed Y145Mf.SPC -> Y145MF.SPC
[Status 07:51:06 INFO] data for Y145 transferred to science data processing
[Tidy 07:51:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:51:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:51:06 INFO] resetting WatchDogTimer
[Status 07:51:07 INFO] Starting Set [AERI set: name Z145, 6 scans, 0 angle, D16300 command]
[Ingest 07:51:07 INFO] Sending XML status message
[Status 07:51:07 INFO] Mirror angle: 0
[Mirror 07:51:07 INFO] rotating to position Z
[Status 07:51:07 INFO] .SET file for ACQ96 ready
[Ingest 07:51:07 INFO] Starting acquisition
[Status 07:51:08 INFO] reading housekeeping
[Status 07:51:25 INFO] acquire complete
[Status 07:51:26 INFO] writing housekeeping
[Sequencer 07:51:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:51:26 INFO] incremented Z scene to 145 completed views
[Sequencer 07:51:26 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:51:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:51:26 INFO] incremented to [AERI set: name A146, 6 scans, 120 angle, D28300 command] set
[sigmove 07:51:26 INFO] Z145.SIG(18)
[sigmove 07:51:26 DEBUG] transformed Z145Ma.SPC -> Z145MA.SPC
[sigmove 07:51:26 DEBUG] transformed Z145Mb.SPC -> Z145MB.SPC
[sigmove 07:51:26 DEBUG] transformed Z145Mc.SPC -> Z145MC.SPC
[sigmove 07:51:26 DEBUG] transformed Z145Md.SPC -> Z145MD.SPC
[sigmove 07:51:26 DEBUG] transformed Z145Me.SPC -> Z145ME.SPC
[sigmove 07:51:26 DEBUG] transformed Z145Mf.SPC -> Z145MF.SPC
[Status 07:51:26 INFO] data for Z145 transferred to science data processing
[Tidy 07:51:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:51:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:51:26 INFO] resetting WatchDogTimer
[Status 07:51:26 INFO] Starting Set [AERI set: name A146, 6 scans, 120 angle, D28300 command]
[Ingest 07:51:26 INFO] Sending XML status message
[Status 07:51:26 INFO] Mirror angle: 120
[Mirror 07:51:26 INFO] rotating to position A
[Status 07:51:27 INFO] .SET file for ACQ96 ready
[Ingest 07:51:27 INFO] Starting acquisition
[Status 07:51:28 INFO] reading housekeeping
[Status 07:51:45 INFO] acquire complete
[Status 07:51:46 INFO] writing housekeeping
[Sequencer 07:51:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:51:46 INFO] incremented A scene to 146 completed views
[Sequencer 07:51:46 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:51:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:51:46 INFO] incremented to [AERI set: name H146, 6 scans, 60 angle, D22500 command] set
[sigmove 07:51:46 INFO] A146.SIG(18)
[sigmove 07:51:46 DEBUG] transformed A146Ma.SPC -> A146MA.SPC
[sigmove 07:51:46 DEBUG] transformed A146Mb.SPC -> A146MB.SPC
[sigmove 07:51:46 DEBUG] transformed A146Mc.SPC -> A146MC.SPC
[sigmove 07:51:46 DEBUG] transformed A146Md.SPC -> A146MD.SPC
[sigmove 07:51:46 DEBUG] transformed A146Me.SPC -> A146ME.SPC
[sigmove 07:51:46 DEBUG] transformed A146Mf.SPC -> A146MF.SPC
[Status 07:51:46 INFO] data for A146 transferred to science data processing
[Tidy 07:51:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:51:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:51:46 INFO] resetting WatchDogTimer
[Status 07:51:46 INFO] Starting Set [AERI set: name H146, 6 scans, 60 angle, D22500 command]
[Ingest 07:51:46 INFO] Sending XML status message
[Status 07:51:46 INFO] Mirror angle: 60
[Mirror 07:51:46 INFO] rotating to position H
[Status 07:51:47 INFO] .SET file for ACQ96 ready
[Ingest 07:51:47 INFO] Starting acquisition
[Status 07:51:47 INFO] reading housekeeping
[Status 07:52:05 INFO] acquire complete
[Status 07:52:06 INFO] writing housekeeping
[Sequencer 07:52:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:52:06 INFO] incremented H scene to 146 completed views
[Sequencer 07:52:06 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:52:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:52:06 INFO] incremented to [AERI set: name S146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:52:06 INFO] H146.SIG(18)
[sigmove 07:52:06 DEBUG] transformed H146Ma.SPC -> H146MA.SPC
[sigmove 07:52:06 DEBUG] transformed H146Mb.SPC -> H146MB.SPC
[sigmove 07:52:06 DEBUG] transformed H146Mc.SPC -> H146MC.SPC
[sigmove 07:52:06 DEBUG] transformed H146Md.SPC -> H146MD.SPC
[sigmove 07:52:06 DEBUG] transformed H146Me.SPC -> H146ME.SPC
[sigmove 07:52:06 DEBUG] transformed H146Mf.SPC -> H146MF.SPC
[Status 07:52:06 INFO] data for H146 transferred to science data processing
[Tidy 07:52:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:52:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:52:06 INFO] resetting WatchDogTimer
[Status 07:52:06 INFO] Starting Set [AERI set: name S146, 6 scans, 0 angle, D16300 command]
[Ingest 07:52:06 INFO] Sending XML status message
[Status 07:52:06 INFO] Mirror angle: 0
[Mirror 07:52:06 INFO] rotating to position S
[Status 07:52:07 INFO] .SET file for ACQ96 ready
[Ingest 07:52:07 INFO] Starting acquisition
[Status 07:52:08 INFO] reading housekeeping
[Status 07:52:26 INFO] acquire complete
[Status 07:52:26 INFO] writing housekeeping
[Sequencer 07:52:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:52:26 INFO] incremented S scene to 146 completed views
[Sequencer 07:52:26 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:52:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:52:26 INFO] incremented to [AERI set: name T146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:52:26 INFO] S146.SIG(18)
[sigmove 07:52:26 DEBUG] transformed S146Ma.SPC -> S146MA.SPC
[sigmove 07:52:26 DEBUG] transformed S146Mb.SPC -> S146MB.SPC
[sigmove 07:52:26 DEBUG] transformed S146Mc.SPC -> S146MC.SPC
[sigmove 07:52:26 DEBUG] transformed S146Md.SPC -> S146MD.SPC
[sigmove 07:52:26 DEBUG] transformed S146Me.SPC -> S146ME.SPC
[sigmove 07:52:26 DEBUG] transformed S146Mf.SPC -> S146MF.SPC
[Status 07:52:26 INFO] data for S146 transferred to science data processing
[Tidy 07:52:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:52:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:52:26 INFO] resetting WatchDogTimer
[Status 07:52:27 INFO] Starting Set [AERI set: name T146, 6 scans, 0 angle, D16300 command]
[Ingest 07:52:27 INFO] Sending XML status message
[Status 07:52:27 INFO] Mirror angle: 0
[Mirror 07:52:27 INFO] rotating to position T
[Status 07:52:27 INFO] .SET file for ACQ96 ready
[Ingest 07:52:27 INFO] Starting acquisition
[Status 07:52:27 INFO] reading housekeeping
[Status 07:52:46 INFO] acquire complete
[Status 07:52:46 INFO] writing housekeeping
[Sequencer 07:52:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:52:46 INFO] incremented T scene to 146 completed views
[Sequencer 07:52:46 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:52:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:52:46 INFO] incremented to [AERI set: name U146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:52:46 INFO] T146.SIG(18)
[sigmove 07:52:46 DEBUG] transformed T146Ma.SPC -> T146MA.SPC
[sigmove 07:52:46 DEBUG] transformed T146Mb.SPC -> T146MB.SPC
[sigmove 07:52:46 DEBUG] transformed T146Mc.SPC -> T146MC.SPC
[sigmove 07:52:46 DEBUG] transformed T146Md.SPC -> T146MD.SPC
[sigmove 07:52:46 DEBUG] transformed T146Me.SPC -> T146ME.SPC
[sigmove 07:52:46 DEBUG] transformed T146Mf.SPC -> T146MF.SPC
[Status 07:52:46 INFO] data for T146 transferred to science data processing
[Tidy 07:52:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:52:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:52:46 INFO] resetting WatchDogTimer
[Status 07:52:47 INFO] Starting Set [AERI set: name U146, 6 scans, 0 angle, D16300 command]
[Ingest 07:52:47 INFO] Sending XML status message
[Status 07:52:47 INFO] Mirror angle: 0
[Mirror 07:52:47 INFO] rotating to position U
[Status 07:52:47 INFO] .SET file for ACQ96 ready
[Ingest 07:52:47 INFO] Starting acquisition
[Status 07:52:47 INFO] reading housekeeping
[Status 07:53:05 INFO] acquire complete
[Status 07:53:05 INFO] writing housekeeping
[Sequencer 07:53:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:53:05 INFO] incremented U scene to 146 completed views
[Sequencer 07:53:05 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:53:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:53:05 INFO] incremented to [AERI set: name V146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:53:05 INFO] U146.SIG(18)
[sigmove 07:53:05 DEBUG] transformed U146Ma.SPC -> U146MA.SPC
[sigmove 07:53:05 DEBUG] transformed U146Mb.SPC -> U146MB.SPC
[sigmove 07:53:05 DEBUG] transformed U146Mc.SPC -> U146MC.SPC
[sigmove 07:53:05 DEBUG] transformed U146Md.SPC -> U146MD.SPC
[sigmove 07:53:05 DEBUG] transformed U146Me.SPC -> U146ME.SPC
[sigmove 07:53:05 DEBUG] transformed U146Mf.SPC -> U146MF.SPC
[Status 07:53:05 INFO] data for U146 transferred to science data processing
[Tidy 07:53:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:53:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:53:05 INFO] resetting WatchDogTimer
[Status 07:53:06 INFO] Starting Set [AERI set: name V146, 6 scans, 0 angle, D16300 command]
[Ingest 07:53:06 INFO] Sending XML status message
[Status 07:53:06 INFO] Mirror angle: 0
[Mirror 07:53:06 INFO] rotating to position V
[Status 07:53:06 INFO] .SET file for ACQ96 ready
[Ingest 07:53:06 INFO] Starting acquisition
[Status 07:53:07 INFO] reading housekeeping
[Status 07:53:24 INFO] acquire complete
[Status 07:53:24 INFO] writing housekeeping
[Sequencer 07:53:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:53:24 INFO] incremented V scene to 146 completed views
[Sequencer 07:53:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:53:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:53:24 INFO] incremented to [AERI set: name W146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:53:25 INFO] V146.SIG(18)
[sigmove 07:53:25 DEBUG] transformed V146Ma.SPC -> V146MA.SPC
[sigmove 07:53:25 DEBUG] transformed V146Mb.SPC -> V146MB.SPC
[sigmove 07:53:25 DEBUG] transformed V146Mc.SPC -> V146MC.SPC
[sigmove 07:53:25 DEBUG] transformed V146Md.SPC -> V146MD.SPC
[sigmove 07:53:25 DEBUG] transformed V146Me.SPC -> V146ME.SPC
[sigmove 07:53:25 DEBUG] transformed V146Mf.SPC -> V146MF.SPC
[Status 07:53:25 INFO] data for V146 transferred to science data processing
[Tidy 07:53:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:53:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:53:25 INFO] resetting WatchDogTimer
[Status 07:53:25 INFO] Starting Set [AERI set: name W146, 6 scans, 0 angle, D16300 command]
[Ingest 07:53:25 INFO] Sending XML status message
[Status 07:53:25 INFO] Mirror angle: 0
[Mirror 07:53:25 INFO] rotating to position W
[Status 07:53:25 INFO] .SET file for ACQ96 ready
[Ingest 07:53:25 INFO] Starting acquisition
[Status 07:53:26 INFO] reading housekeeping
[Status 07:53:43 INFO] acquire complete
[Status 07:53:44 INFO] writing housekeeping
[Sequencer 07:53:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:53:44 INFO] incremented W scene to 146 completed views
[Sequencer 07:53:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:53:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:53:44 INFO] incremented to [AERI set: name X146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:53:44 INFO] W146.SIG(18)
[sigmove 07:53:44 DEBUG] transformed W146Ma.SPC -> W146MA.SPC
[sigmove 07:53:44 DEBUG] transformed W146Mb.SPC -> W146MB.SPC
[sigmove 07:53:44 DEBUG] transformed W146Mc.SPC -> W146MC.SPC
[sigmove 07:53:44 DEBUG] transformed W146Md.SPC -> W146MD.SPC
[sigmove 07:53:44 DEBUG] transformed W146Me.SPC -> W146ME.SPC
[sigmove 07:53:44 DEBUG] transformed W146Mf.SPC -> W146MF.SPC
[Status 07:53:44 INFO] data for W146 transferred to science data processing
[Tidy 07:53:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:53:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:53:44 INFO] resetting WatchDogTimer
[Status 07:53:44 INFO] Starting Set [AERI set: name X146, 6 scans, 0 angle, D16300 command]
[Ingest 07:53:44 INFO] Sending XML status message
[Status 07:53:44 INFO] Mirror angle: 0
[Mirror 07:53:44 INFO] rotating to position X
[Status 07:53:44 INFO] .SET file for ACQ96 ready
[Ingest 07:53:45 INFO] Starting acquisition
[Status 07:53:45 INFO] reading housekeeping
[Status 07:54:02 INFO] acquire complete
[Status 07:54:03 INFO] writing housekeeping
[Sequencer 07:54:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:54:03 INFO] incremented X scene to 146 completed views
[Sequencer 07:54:03 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:54:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:54:03 INFO] incremented to [AERI set: name Y146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:54:03 INFO] X146.SIG(18)
[sigmove 07:54:03 DEBUG] transformed X146Ma.SPC -> X146MA.SPC
[sigmove 07:54:03 DEBUG] transformed X146Mb.SPC -> X146MB.SPC
[sigmove 07:54:03 DEBUG] transformed X146Mc.SPC -> X146MC.SPC
[sigmove 07:54:03 DEBUG] transformed X146Md.SPC -> X146MD.SPC
[sigmove 07:54:03 DEBUG] transformed X146Me.SPC -> X146ME.SPC
[sigmove 07:54:03 DEBUG] transformed X146Mf.SPC -> X146MF.SPC
[Status 07:54:03 INFO] data for X146 transferred to science data processing
[Tidy 07:54:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:54:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:54:03 INFO] resetting WatchDogTimer
[Status 07:54:03 INFO] Starting Set [AERI set: name Y146, 6 scans, 0 angle, D16300 command]
[Ingest 07:54:03 INFO] Sending XML status message
[Status 07:54:03 INFO] Mirror angle: 0
[Mirror 07:54:03 INFO] rotating to position Y
[Status 07:54:03 INFO] .SET file for ACQ96 ready
[Ingest 07:54:04 INFO] Starting acquisition
[Status 07:54:04 INFO] reading housekeeping
[Status 07:54:21 INFO] acquire complete
[Status 07:54:22 INFO] writing housekeeping
[Sequencer 07:54:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:54:22 INFO] incremented Y scene to 146 completed views
[Sequencer 07:54:22 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:54:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:54:22 INFO] incremented to [AERI set: name Z146, 6 scans, 0 angle, D16300 command] set
[sigmove 07:54:22 INFO] Y146.SIG(18)
[sigmove 07:54:22 DEBUG] transformed Y146Ma.SPC -> Y146MA.SPC
[sigmove 07:54:22 DEBUG] transformed Y146Mb.SPC -> Y146MB.SPC
[sigmove 07:54:22 DEBUG] transformed Y146Mc.SPC -> Y146MC.SPC
[sigmove 07:54:22 DEBUG] transformed Y146Md.SPC -> Y146MD.SPC
[sigmove 07:54:22 DEBUG] transformed Y146Me.SPC -> Y146ME.SPC
[sigmove 07:54:22 DEBUG] transformed Y146Mf.SPC -> Y146MF.SPC
[Status 07:54:22 INFO] data for Y146 transferred to science data processing
[Tidy 07:54:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:54:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:54:22 INFO] resetting WatchDogTimer
[Status 07:54:22 INFO] Starting Set [AERI set: name Z146, 6 scans, 0 angle, D16300 command]
[Ingest 07:54:22 INFO] Sending XML status message
[Status 07:54:22 INFO] Mirror angle: 0
[Mirror 07:54:22 INFO] rotating to position Z
[Status 07:54:22 INFO] .SET file for ACQ96 ready
[Ingest 07:54:23 INFO] Starting acquisition
[Status 07:54:23 INFO] reading housekeeping
[Status 07:54:40 INFO] acquire complete
[Status 07:54:41 INFO] writing housekeeping
[Sequencer 07:54:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:54:41 INFO] incremented Z scene to 146 completed views
[Sequencer 07:54:41 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:54:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:54:41 INFO] incremented to [AERI set: name H147, 6 scans, 60 angle, D22500 command] set
[sigmove 07:54:41 INFO] Z146.SIG(18)
[sigmove 07:54:41 DEBUG] transformed Z146Ma.SPC -> Z146MA.SPC
[sigmove 07:54:41 DEBUG] transformed Z146Mb.SPC -> Z146MB.SPC
[sigmove 07:54:41 DEBUG] transformed Z146Mc.SPC -> Z146MC.SPC
[sigmove 07:54:41 DEBUG] transformed Z146Md.SPC -> Z146MD.SPC
[sigmove 07:54:41 DEBUG] transformed Z146Me.SPC -> Z146ME.SPC
[sigmove 07:54:41 DEBUG] transformed Z146Mf.SPC -> Z146MF.SPC
[Status 07:54:41 INFO] data for Z146 transferred to science data processing
[Tidy 07:54:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:54:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:54:41 INFO] resetting WatchDogTimer
[Status 07:54:41 INFO] Starting Set [AERI set: name H147, 6 scans, 60 angle, D22500 command]
[Ingest 07:54:41 INFO] Sending XML status message
[Status 07:54:41 INFO] Mirror angle: 60
[Mirror 07:54:41 INFO] rotating to position H
[Status 07:54:42 INFO] .SET file for ACQ96 ready
[Ingest 07:54:42 INFO] Starting acquisition
[Status 07:54:42 INFO] reading housekeeping
[Status 07:55:00 INFO] acquire complete
[Status 07:55:01 INFO] writing housekeeping
[Sequencer 07:55:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:55:01 INFO] incremented H scene to 147 completed views
[Sequencer 07:55:01 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:55:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:55:01 INFO] incremented to [AERI set: name A147, 6 scans, 120 angle, D28300 command] set
[sigmove 07:55:01 INFO] H147.SIG(18)
[sigmove 07:55:01 DEBUG] transformed H147Ma.SPC -> H147MA.SPC
[sigmove 07:55:01 DEBUG] transformed H147Mb.SPC -> H147MB.SPC
[sigmove 07:55:01 DEBUG] transformed H147Mc.SPC -> H147MC.SPC
[sigmove 07:55:01 DEBUG] transformed H147Md.SPC -> H147MD.SPC
[sigmove 07:55:01 DEBUG] transformed H147Me.SPC -> H147ME.SPC
[sigmove 07:55:01 DEBUG] transformed H147Mf.SPC -> H147MF.SPC
[Status 07:55:01 INFO] data for H147 transferred to science data processing
[Tidy 07:55:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:55:01 INFO] A145.FIN(19),H145.FIN(19),S145.FIN(19),T145.FIN(19),U145.FIN(19),V145.FIN(19),W145.FIN(19),X145.FIN(19),Y145.FIN(19),Z145.FIN(19),A146.FIN(19),H146.FIN(19),S146.FIN(19),T146.FIN(19),U146.FIN(19),V146.FIN(19),W146.FIN(19),X146.FIN(19),Y146.FIN(19),Z146.FIN(19)
[sigmove 07:55:01 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:55:01 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 07:55:04 DEBUG] done zipping
[WatchDog 07:55:04 INFO] resetting WatchDogTimer
[Status 07:55:04 INFO] Starting Set [AERI set: name A147, 6 scans, 120 angle, D28300 command]
[Ingest 07:55:04 INFO] Sending XML status message
[Status 07:55:04 INFO] Mirror angle: 120
[Mirror 07:55:04 INFO] rotating to position A
[Status 07:55:05 INFO] .SET file for ACQ96 ready
[Ingest 07:55:05 INFO] Starting acquisition
[Status 07:55:06 INFO] reading housekeeping
[Status 07:55:24 INFO] acquire complete
[Status 07:55:25 INFO] writing housekeeping
[Sequencer 07:55:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:55:25 INFO] incremented A scene to 147 completed views
[Sequencer 07:55:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:55:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:55:25 INFO] incremented to [AERI set: name S147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:55:25 INFO] A147.SIG(18)
[sigmove 07:55:25 DEBUG] transformed A147Ma.SPC -> A147MA.SPC
[sigmove 07:55:25 DEBUG] transformed A147Mb.SPC -> A147MB.SPC
[sigmove 07:55:25 DEBUG] transformed A147Mc.SPC -> A147MC.SPC
[sigmove 07:55:25 DEBUG] transformed A147Md.SPC -> A147MD.SPC
[sigmove 07:55:25 DEBUG] transformed A147Me.SPC -> A147ME.SPC
[sigmove 07:55:25 DEBUG] transformed A147Mf.SPC -> A147MF.SPC
[Status 07:55:25 INFO] data for A147 transferred to science data processing
[Tidy 07:55:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:55:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:55:25 INFO] resetting WatchDogTimer
[Status 07:55:25 INFO] Starting Set [AERI set: name S147, 6 scans, 0 angle, D16300 command]
[Ingest 07:55:25 INFO] Sending XML status message
[Status 07:55:25 INFO] Mirror angle: 0
[Mirror 07:55:25 INFO] rotating to position S
[Status 07:55:26 INFO] .SET file for ACQ96 ready
[Ingest 07:55:27 INFO] Starting acquisition
[Status 07:55:27 INFO] reading housekeeping
[Status 07:55:44 INFO] acquire complete
[Status 07:55:45 INFO] writing housekeeping
[Sequencer 07:55:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:55:45 INFO] incremented S scene to 147 completed views
[Sequencer 07:55:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:55:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:55:45 INFO] incremented to [AERI set: name T147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:55:45 INFO] S147.SIG(18)
[sigmove 07:55:45 DEBUG] transformed S147Ma.SPC -> S147MA.SPC
[sigmove 07:55:45 DEBUG] transformed S147Mb.SPC -> S147MB.SPC
[sigmove 07:55:45 DEBUG] transformed S147Mc.SPC -> S147MC.SPC
[sigmove 07:55:45 DEBUG] transformed S147Md.SPC -> S147MD.SPC
[sigmove 07:55:45 DEBUG] transformed S147Me.SPC -> S147ME.SPC
[sigmove 07:55:45 DEBUG] transformed S147Mf.SPC -> S147MF.SPC
[Status 07:55:45 INFO] data for S147 transferred to science data processing
[Tidy 07:55:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:55:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:55:45 INFO] resetting WatchDogTimer
[Status 07:55:45 INFO] Starting Set [AERI set: name T147, 6 scans, 0 angle, D16300 command]
[Ingest 07:55:45 INFO] Sending XML status message
[Status 07:55:45 INFO] Mirror angle: 0
[Mirror 07:55:45 INFO] rotating to position T
[Status 07:55:46 INFO] .SET file for ACQ96 ready
[Ingest 07:55:46 INFO] Starting acquisition
[Status 07:55:46 INFO] reading housekeeping
[Status 07:56:03 INFO] acquire complete
[Status 07:56:04 INFO] writing housekeeping
[Sequencer 07:56:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:56:04 INFO] incremented T scene to 147 completed views
[Sequencer 07:56:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:56:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:56:04 INFO] incremented to [AERI set: name U147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:56:04 INFO] T147.SIG(18)
[sigmove 07:56:04 DEBUG] transformed T147Ma.SPC -> T147MA.SPC
[sigmove 07:56:04 DEBUG] transformed T147Mb.SPC -> T147MB.SPC
[sigmove 07:56:04 DEBUG] transformed T147Mc.SPC -> T147MC.SPC
[sigmove 07:56:04 DEBUG] transformed T147Md.SPC -> T147MD.SPC
[sigmove 07:56:04 DEBUG] transformed T147Me.SPC -> T147ME.SPC
[sigmove 07:56:04 DEBUG] transformed T147Mf.SPC -> T147MF.SPC
[Status 07:56:04 INFO] data for T147 transferred to science data processing
[Tidy 07:56:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:56:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:56:04 INFO] resetting WatchDogTimer
[Status 07:56:04 INFO] Starting Set [AERI set: name U147, 6 scans, 0 angle, D16300 command]
[Ingest 07:56:04 INFO] Sending XML status message
[Status 07:56:04 INFO] Mirror angle: 0
[Mirror 07:56:04 INFO] rotating to position U
[Status 07:56:05 INFO] .SET file for ACQ96 ready
[Ingest 07:56:05 INFO] Starting acquisition
[Status 07:56:05 INFO] reading housekeeping
[Status 07:56:22 INFO] acquire complete
[Status 07:56:23 INFO] writing housekeeping
[Sequencer 07:56:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:56:23 INFO] incremented U scene to 147 completed views
[Sequencer 07:56:23 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:56:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:56:23 INFO] incremented to [AERI set: name V147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:56:23 INFO] U147.SIG(18)
[sigmove 07:56:23 DEBUG] transformed U147Ma.SPC -> U147MA.SPC
[sigmove 07:56:23 DEBUG] transformed U147Mb.SPC -> U147MB.SPC
[sigmove 07:56:23 DEBUG] transformed U147Mc.SPC -> U147MC.SPC
[sigmove 07:56:23 DEBUG] transformed U147Md.SPC -> U147MD.SPC
[sigmove 07:56:23 DEBUG] transformed U147Me.SPC -> U147ME.SPC
[sigmove 07:56:23 DEBUG] transformed U147Mf.SPC -> U147MF.SPC
[Status 07:56:23 INFO] data for U147 transferred to science data processing
[Tidy 07:56:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:56:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:56:23 INFO] resetting WatchDogTimer
[Status 07:56:23 INFO] Starting Set [AERI set: name V147, 6 scans, 0 angle, D16300 command]
[Ingest 07:56:23 INFO] Sending XML status message
[Status 07:56:23 INFO] Mirror angle: 0
[Mirror 07:56:23 INFO] rotating to position V
[Status 07:56:24 INFO] .SET file for ACQ96 ready
[Ingest 07:56:24 INFO] Starting acquisition
[Status 07:56:24 INFO] reading housekeeping
[Status 07:56:41 INFO] acquire complete
[Status 07:56:42 INFO] writing housekeeping
[Sequencer 07:56:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:56:42 INFO] incremented V scene to 147 completed views
[Sequencer 07:56:42 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:56:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:56:42 INFO] incremented to [AERI set: name W147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:56:42 INFO] V147.SIG(18)
[sigmove 07:56:42 DEBUG] transformed V147Ma.SPC -> V147MA.SPC
[sigmove 07:56:42 DEBUG] transformed V147Mb.SPC -> V147MB.SPC
[sigmove 07:56:42 DEBUG] transformed V147Mc.SPC -> V147MC.SPC
[sigmove 07:56:42 DEBUG] transformed V147Md.SPC -> V147MD.SPC
[sigmove 07:56:42 DEBUG] transformed V147Me.SPC -> V147ME.SPC
[sigmove 07:56:42 DEBUG] transformed V147Mf.SPC -> V147MF.SPC
[Status 07:56:42 INFO] data for V147 transferred to science data processing
[Tidy 07:56:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:56:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:56:42 INFO] resetting WatchDogTimer
[Status 07:56:42 INFO] Starting Set [AERI set: name W147, 6 scans, 0 angle, D16300 command]
[Ingest 07:56:42 INFO] Sending XML status message
[Status 07:56:42 INFO] Mirror angle: 0
[Mirror 07:56:42 INFO] rotating to position W
[Status 07:56:43 INFO] .SET file for ACQ96 ready
[Ingest 07:56:43 INFO] Starting acquisition
[Status 07:56:43 INFO] reading housekeeping
[Status 07:57:01 INFO] acquire complete
[Status 07:57:01 INFO] writing housekeeping
[Sequencer 07:57:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:57:01 INFO] incremented W scene to 147 completed views
[Sequencer 07:57:01 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:57:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:57:01 INFO] incremented to [AERI set: name X147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:57:01 INFO] W147.SIG(18)
[sigmove 07:57:01 DEBUG] transformed W147Ma.SPC -> W147MA.SPC
[sigmove 07:57:01 DEBUG] transformed W147Mb.SPC -> W147MB.SPC
[sigmove 07:57:01 DEBUG] transformed W147Mc.SPC -> W147MC.SPC
[sigmove 07:57:01 DEBUG] transformed W147Md.SPC -> W147MD.SPC
[sigmove 07:57:01 DEBUG] transformed W147Me.SPC -> W147ME.SPC
[sigmove 07:57:01 DEBUG] transformed W147Mf.SPC -> W147MF.SPC
[Status 07:57:01 INFO] data for W147 transferred to science data processing
[Tidy 07:57:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:57:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:57:01 INFO] resetting WatchDogTimer
[Status 07:57:01 INFO] Starting Set [AERI set: name X147, 6 scans, 0 angle, D16300 command]
[Ingest 07:57:01 INFO] Sending XML status message
[Status 07:57:01 INFO] Mirror angle: 0
[Mirror 07:57:02 INFO] rotating to position X
[Status 07:57:02 INFO] .SET file for ACQ96 ready
[Ingest 07:57:02 INFO] Starting acquisition
[Status 07:57:02 INFO] reading housekeeping
[Status 07:57:20 INFO] acquire complete
[Status 07:57:20 INFO] writing housekeeping
[Sequencer 07:57:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:57:20 INFO] incremented X scene to 147 completed views
[Sequencer 07:57:20 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:57:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:57:20 INFO] incremented to [AERI set: name Y147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:57:20 INFO] X147.SIG(18)
[sigmove 07:57:20 DEBUG] transformed X147Ma.SPC -> X147MA.SPC
[sigmove 07:57:20 DEBUG] transformed X147Mb.SPC -> X147MB.SPC
[sigmove 07:57:20 DEBUG] transformed X147Mc.SPC -> X147MC.SPC
[sigmove 07:57:20 DEBUG] transformed X147Md.SPC -> X147MD.SPC
[sigmove 07:57:20 DEBUG] transformed X147Me.SPC -> X147ME.SPC
[sigmove 07:57:20 DEBUG] transformed X147Mf.SPC -> X147MF.SPC
[Status 07:57:20 INFO] data for X147 transferred to science data processing
[Tidy 07:57:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:57:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:57:20 INFO] resetting WatchDogTimer
[Status 07:57:20 INFO] Starting Set [AERI set: name Y147, 6 scans, 0 angle, D16300 command]
[Ingest 07:57:20 INFO] Sending XML status message
[Status 07:57:20 INFO] Mirror angle: 0
[Mirror 07:57:21 INFO] rotating to position Y
[Status 07:57:21 INFO] .SET file for ACQ96 ready
[Ingest 07:57:21 INFO] Starting acquisition
[Status 07:57:21 INFO] reading housekeeping
[Status 07:57:39 INFO] acquire complete
[Status 07:57:39 INFO] writing housekeeping
[Sequencer 07:57:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:57:39 INFO] incremented Y scene to 147 completed views
[Sequencer 07:57:39 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:57:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:57:39 INFO] incremented to [AERI set: name Z147, 6 scans, 0 angle, D16300 command] set
[sigmove 07:57:39 INFO] Y147.SIG(18)
[sigmove 07:57:39 DEBUG] transformed Y147Ma.SPC -> Y147MA.SPC
[sigmove 07:57:39 DEBUG] transformed Y147Mb.SPC -> Y147MB.SPC
[sigmove 07:57:39 DEBUG] transformed Y147Mc.SPC -> Y147MC.SPC
[sigmove 07:57:39 DEBUG] transformed Y147Md.SPC -> Y147MD.SPC
[sigmove 07:57:39 DEBUG] transformed Y147Me.SPC -> Y147ME.SPC
[sigmove 07:57:39 DEBUG] transformed Y147Mf.SPC -> Y147MF.SPC
[Status 07:57:39 INFO] data for Y147 transferred to science data processing
[Tidy 07:57:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:57:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:57:39 INFO] resetting WatchDogTimer
[Status 07:57:40 INFO] Starting Set [AERI set: name Z147, 6 scans, 0 angle, D16300 command]
[Ingest 07:57:40 INFO] Sending XML status message
[Status 07:57:40 INFO] Mirror angle: 0
[Mirror 07:57:40 INFO] rotating to position Z
[Status 07:57:40 INFO] .SET file for ACQ96 ready
[Ingest 07:57:40 INFO] Starting acquisition
[Status 07:57:40 INFO] reading housekeeping
[Status 07:57:58 INFO] acquire complete
[Status 07:57:58 INFO] writing housekeeping
[Sequencer 07:57:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:57:58 INFO] incremented Z scene to 147 completed views
[Sequencer 07:57:58 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 07:57:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:57:58 INFO] incremented to [AERI set: name A148, 6 scans, 120 angle, D28300 command] set
[sigmove 07:57:58 INFO] Z147.SIG(18)
[sigmove 07:57:58 DEBUG] transformed Z147Ma.SPC -> Z147MA.SPC
[sigmove 07:57:58 DEBUG] transformed Z147Mb.SPC -> Z147MB.SPC
[sigmove 07:57:58 DEBUG] transformed Z147Mc.SPC -> Z147MC.SPC
[sigmove 07:57:58 DEBUG] transformed Z147Md.SPC -> Z147MD.SPC
[sigmove 07:57:58 DEBUG] transformed Z147Me.SPC -> Z147ME.SPC
[sigmove 07:57:58 DEBUG] transformed Z147Mf.SPC -> Z147MF.SPC
[Status 07:57:58 INFO] data for Z147 transferred to science data processing
[Tidy 07:57:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:57:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:57:58 INFO] resetting WatchDogTimer
[Status 07:57:59 INFO] Starting Set [AERI set: name A148, 6 scans, 120 angle, D28300 command]
[Ingest 07:57:59 INFO] Sending XML status message
[Status 07:57:59 INFO] Mirror angle: 120
[Mirror 07:57:59 INFO] rotating to position A
[Status 07:58:00 INFO] .SET file for ACQ96 ready
[Ingest 07:58:00 INFO] Starting acquisition
[Status 07:58:01 INFO] reading housekeeping
[Status 07:58:18 INFO] acquire complete
[Status 07:58:19 INFO] writing housekeeping
[Sequencer 07:58:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:58:19 INFO] incremented A scene to 148 completed views
[Sequencer 07:58:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 07:58:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:58:19 INFO] incremented to [AERI set: name H148, 6 scans, 60 angle, D22500 command] set
[sigmove 07:58:19 INFO] A148.SIG(18)
[sigmove 07:58:19 DEBUG] transformed A148Ma.SPC -> A148MA.SPC
[sigmove 07:58:19 DEBUG] transformed A148Mb.SPC -> A148MB.SPC
[sigmove 07:58:19 DEBUG] transformed A148Mc.SPC -> A148MC.SPC
[sigmove 07:58:19 DEBUG] transformed A148Md.SPC -> A148MD.SPC
[sigmove 07:58:19 DEBUG] transformed A148Me.SPC -> A148ME.SPC
[sigmove 07:58:19 DEBUG] transformed A148Mf.SPC -> A148MF.SPC
[Status 07:58:19 INFO] data for A148 transferred to science data processing
[Tidy 07:58:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:58:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:58:19 INFO] resetting WatchDogTimer
[Status 07:58:19 INFO] Starting Set [AERI set: name H148, 6 scans, 60 angle, D22500 command]
[Ingest 07:58:19 INFO] Sending XML status message
[Status 07:58:19 INFO] Mirror angle: 60
[Mirror 07:58:19 INFO] rotating to position H
[Status 07:58:20 INFO] .SET file for ACQ96 ready
[Ingest 07:58:20 INFO] Starting acquisition
[Status 07:58:20 INFO] reading housekeeping
[Status 07:58:38 INFO] acquire complete
[Status 07:58:39 INFO] writing housekeeping
[Sequencer 07:58:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:58:39 INFO] incremented H scene to 148 completed views
[Sequencer 07:58:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 07:58:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:58:39 INFO] incremented to [AERI set: name S148, 6 scans, 0 angle, D16300 command] set
[sigmove 07:58:39 INFO] H148.SIG(18)
[sigmove 07:58:39 DEBUG] transformed H148Ma.SPC -> H148MA.SPC
[sigmove 07:58:39 DEBUG] transformed H148Mb.SPC -> H148MB.SPC
[sigmove 07:58:39 DEBUG] transformed H148Mc.SPC -> H148MC.SPC
[sigmove 07:58:39 DEBUG] transformed H148Md.SPC -> H148MD.SPC
[sigmove 07:58:39 DEBUG] transformed H148Me.SPC -> H148ME.SPC
[sigmove 07:58:39 DEBUG] transformed H148Mf.SPC -> H148MF.SPC
[Status 07:58:39 INFO] data for H148 transferred to science data processing
[Tidy 07:58:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:58:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:58:39 INFO] resetting WatchDogTimer
[Status 07:58:39 INFO] Starting Set [AERI set: name S148, 6 scans, 0 angle, D16300 command]
[Ingest 07:58:39 INFO] Sending XML status message
[Status 07:58:39 INFO] Mirror angle: 0
[Mirror 07:58:39 INFO] rotating to position S
[Status 07:58:40 INFO] .SET file for ACQ96 ready
[Ingest 07:58:40 INFO] Starting acquisition
[Status 07:58:40 INFO] reading housekeeping
[Status 07:58:58 INFO] acquire complete
[Status 07:58:59 INFO] writing housekeeping
[Sequencer 07:58:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:58:59 INFO] incremented S scene to 148 completed views
[Sequencer 07:58:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:58:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:58:59 INFO] incremented to [AERI set: name T148, 6 scans, 0 angle, D16300 command] set
[sigmove 07:58:59 INFO] S148.SIG(18)
[sigmove 07:58:59 DEBUG] transformed S148Ma.SPC -> S148MA.SPC
[sigmove 07:58:59 DEBUG] transformed S148Mb.SPC -> S148MB.SPC
[sigmove 07:58:59 DEBUG] transformed S148Mc.SPC -> S148MC.SPC
[sigmove 07:58:59 DEBUG] transformed S148Md.SPC -> S148MD.SPC
[sigmove 07:58:59 DEBUG] transformed S148Me.SPC -> S148ME.SPC
[sigmove 07:58:59 DEBUG] transformed S148Mf.SPC -> S148MF.SPC
[Status 07:58:59 INFO] data for S148 transferred to science data processing
[Tidy 07:58:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:58:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:58:59 INFO] resetting WatchDogTimer
[Status 07:58:59 INFO] Starting Set [AERI set: name T148, 6 scans, 0 angle, D16300 command]
[Ingest 07:58:59 INFO] Sending XML status message
[Status 07:58:59 INFO] Mirror angle: 0
[Mirror 07:58:59 INFO] rotating to position T
[Status 07:59:00 INFO] .SET file for ACQ96 ready
[Ingest 07:59:00 INFO] Starting acquisition
[Status 07:59:00 INFO] reading housekeeping
[Status 07:59:18 INFO] acquire complete
[Status 07:59:18 INFO] writing housekeeping
[Sequencer 07:59:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:59:18 INFO] incremented T scene to 148 completed views
[Sequencer 07:59:18 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:59:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:59:18 INFO] incremented to [AERI set: name U148, 6 scans, 0 angle, D16300 command] set
[sigmove 07:59:18 INFO] T148.SIG(18)
[sigmove 07:59:18 DEBUG] transformed T148Ma.SPC -> T148MA.SPC
[sigmove 07:59:18 DEBUG] transformed T148Mb.SPC -> T148MB.SPC
[sigmove 07:59:18 DEBUG] transformed T148Mc.SPC -> T148MC.SPC
[sigmove 07:59:18 DEBUG] transformed T148Md.SPC -> T148MD.SPC
[sigmove 07:59:18 DEBUG] transformed T148Me.SPC -> T148ME.SPC
[sigmove 07:59:18 DEBUG] transformed T148Mf.SPC -> T148MF.SPC
[Status 07:59:18 INFO] data for T148 transferred to science data processing
[Tidy 07:59:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:59:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:59:18 INFO] resetting WatchDogTimer
[Status 07:59:18 INFO] Starting Set [AERI set: name U148, 6 scans, 0 angle, D16300 command]
[Ingest 07:59:18 INFO] Sending XML status message
[Status 07:59:18 INFO] Mirror angle: 0
[Mirror 07:59:19 INFO] rotating to position U
[Status 07:59:19 INFO] .SET file for ACQ96 ready
[Ingest 07:59:19 INFO] Starting acquisition
[Status 07:59:19 INFO] reading housekeeping
[Status 07:59:37 INFO] acquire complete
[Status 07:59:37 INFO] writing housekeeping
[Sequencer 07:59:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:59:37 INFO] incremented U scene to 148 completed views
[Sequencer 07:59:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:59:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:59:37 INFO] incremented to [AERI set: name V148, 6 scans, 0 angle, D16300 command] set
[sigmove 07:59:37 INFO] U148.SIG(18)
[sigmove 07:59:37 DEBUG] transformed U148Ma.SPC -> U148MA.SPC
[sigmove 07:59:37 DEBUG] transformed U148Mb.SPC -> U148MB.SPC
[sigmove 07:59:37 DEBUG] transformed U148Mc.SPC -> U148MC.SPC
[sigmove 07:59:37 DEBUG] transformed U148Md.SPC -> U148MD.SPC
[sigmove 07:59:37 DEBUG] transformed U148Me.SPC -> U148ME.SPC
[sigmove 07:59:37 DEBUG] transformed U148Mf.SPC -> U148MF.SPC
[Status 07:59:37 INFO] data for U148 transferred to science data processing
[Tidy 07:59:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:59:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:59:37 INFO] resetting WatchDogTimer
[Status 07:59:37 INFO] Starting Set [AERI set: name V148, 6 scans, 0 angle, D16300 command]
[Ingest 07:59:37 INFO] Sending XML status message
[Status 07:59:37 INFO] Mirror angle: 0
[Mirror 07:59:38 INFO] rotating to position V
[Status 07:59:38 INFO] .SET file for ACQ96 ready
[Ingest 07:59:38 INFO] Starting acquisition
[Status 07:59:38 INFO] reading housekeeping
[Status 07:59:56 INFO] acquire complete
[Status 07:59:56 INFO] writing housekeeping
[Sequencer 07:59:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 07:59:56 INFO] incremented V scene to 148 completed views
[Sequencer 07:59:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 07:59:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 07:59:56 INFO] incremented to [AERI set: name W148, 6 scans, 0 angle, D16300 command] set
[sigmove 07:59:56 INFO] V148.SIG(18)
[sigmove 07:59:56 DEBUG] transformed V148Ma.SPC -> V148MA.SPC
[sigmove 07:59:56 DEBUG] transformed V148Mb.SPC -> V148MB.SPC
[sigmove 07:59:56 DEBUG] transformed V148Mc.SPC -> V148MC.SPC
[sigmove 07:59:56 DEBUG] transformed V148Md.SPC -> V148MD.SPC
[sigmove 07:59:56 DEBUG] transformed V148Me.SPC -> V148ME.SPC
[sigmove 07:59:56 DEBUG] transformed V148Mf.SPC -> V148MF.SPC
[Status 07:59:56 INFO] data for V148 transferred to science data processing
[Tidy 07:59:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 07:59:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 07:59:56 INFO] resetting WatchDogTimer
[Status 07:59:57 INFO] Starting Set [AERI set: name W148, 6 scans, 0 angle, D16300 command]
[Ingest 07:59:57 INFO] Sending XML status message
[Status 07:59:57 INFO] Mirror angle: 0
[Mirror 07:59:57 INFO] rotating to position W
[Status 07:59:57 INFO] .SET file for ACQ96 ready
[Ingest 07:59:57 INFO] Starting acquisition
[Status 07:59:57 INFO] reading housekeeping
[Status 08:00:15 INFO] acquire complete
[Status 08:00:15 INFO] writing housekeeping
[Sequencer 08:00:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:00:15 INFO] incremented W scene to 148 completed views
[Sequencer 08:00:15 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:00:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:00:15 INFO] incremented to [AERI set: name X148, 6 scans, 0 angle, D16300 command] set
[sigmove 08:00:15 INFO] W148.SIG(18)
[sigmove 08:00:15 DEBUG] transformed W148Ma.SPC -> W148MA.SPC
[sigmove 08:00:15 DEBUG] transformed W148Mb.SPC -> W148MB.SPC
[sigmove 08:00:15 DEBUG] transformed W148Mc.SPC -> W148MC.SPC
[sigmove 08:00:15 DEBUG] transformed W148Md.SPC -> W148MD.SPC
[sigmove 08:00:15 DEBUG] transformed W148Me.SPC -> W148ME.SPC
[sigmove 08:00:15 DEBUG] transformed W148Mf.SPC -> W148MF.SPC
[Status 08:00:15 INFO] data for W148 transferred to science data processing
[Tidy 08:00:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:00:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:00:15 INFO] resetting WatchDogTimer
[Status 08:00:16 INFO] Starting Set [AERI set: name X148, 6 scans, 0 angle, D16300 command]
[Ingest 08:00:16 INFO] Sending XML status message
[Status 08:00:16 INFO] Mirror angle: 0
[Mirror 08:00:16 INFO] rotating to position X
[Status 08:00:16 INFO] .SET file for ACQ96 ready
[Ingest 08:00:16 INFO] Starting acquisition
[Status 08:00:16 INFO] reading housekeeping
[Status 08:00:34 INFO] acquire complete
[Status 08:00:34 INFO] writing housekeeping
[Sequencer 08:00:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:00:34 INFO] incremented X scene to 148 completed views
[Sequencer 08:00:34 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:00:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:00:34 INFO] incremented to [AERI set: name Y148, 6 scans, 0 angle, D16300 command] set
[sigmove 08:00:34 INFO] X148.SIG(18)
[sigmove 08:00:34 DEBUG] transformed X148Ma.SPC -> X148MA.SPC
[sigmove 08:00:34 DEBUG] transformed X148Mb.SPC -> X148MB.SPC
[sigmove 08:00:34 DEBUG] transformed X148Mc.SPC -> X148MC.SPC
[sigmove 08:00:34 DEBUG] transformed X148Md.SPC -> X148MD.SPC
[sigmove 08:00:34 DEBUG] transformed X148Me.SPC -> X148ME.SPC
[sigmove 08:00:34 DEBUG] transformed X148Mf.SPC -> X148MF.SPC
[Status 08:00:34 INFO] data for X148 transferred to science data processing
[Tidy 08:00:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:00:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:00:34 INFO] resetting WatchDogTimer
[Status 08:00:35 INFO] Starting Set [AERI set: name Y148, 6 scans, 0 angle, D16300 command]
[Ingest 08:00:35 INFO] Sending XML status message
[Status 08:00:35 INFO] Mirror angle: 0
[Mirror 08:00:35 INFO] rotating to position Y
[Status 08:00:35 INFO] .SET file for ACQ96 ready
[Ingest 08:00:35 INFO] Starting acquisition
[Status 08:00:36 INFO] reading housekeeping
[Status 08:00:53 INFO] acquire complete
[Status 08:00:54 INFO] writing housekeeping
[Sequencer 08:00:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:00:54 INFO] incremented Y scene to 148 completed views
[Sequencer 08:00:54 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:00:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:00:54 INFO] incremented to [AERI set: name Z148, 6 scans, 0 angle, D16300 command] set
[sigmove 08:00:54 INFO] Y148.SIG(18)
[sigmove 08:00:54 DEBUG] transformed Y148Ma.SPC -> Y148MA.SPC
[sigmove 08:00:54 DEBUG] transformed Y148Mb.SPC -> Y148MB.SPC
[sigmove 08:00:54 DEBUG] transformed Y148Mc.SPC -> Y148MC.SPC
[sigmove 08:00:54 DEBUG] transformed Y148Md.SPC -> Y148MD.SPC
[sigmove 08:00:54 DEBUG] transformed Y148Me.SPC -> Y148ME.SPC
[sigmove 08:00:54 DEBUG] transformed Y148Mf.SPC -> Y148MF.SPC
[Status 08:00:54 INFO] data for Y148 transferred to science data processing
[Tidy 08:00:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:00:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:00:54 INFO] resetting WatchDogTimer
[Status 08:00:54 INFO] Starting Set [AERI set: name Z148, 6 scans, 0 angle, D16300 command]
[Ingest 08:00:54 INFO] Sending XML status message
[Status 08:00:54 INFO] Mirror angle: 0
[Mirror 08:00:54 INFO] rotating to position Z
[Status 08:00:54 INFO] .SET file for ACQ96 ready
[Ingest 08:00:54 INFO] Starting acquisition
[Status 08:00:55 INFO] reading housekeeping
[Status 08:01:12 INFO] acquire complete
[Status 08:01:13 INFO] writing housekeeping
[Sequencer 08:01:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:01:13 INFO] incremented Z scene to 148 completed views
[Sequencer 08:01:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:01:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:01:13 INFO] incremented to [AERI set: name H149, 6 scans, 60 angle, D22500 command] set
[sigmove 08:01:13 INFO] Z148.SIG(18)
[sigmove 08:01:13 DEBUG] transformed Z148Ma.SPC -> Z148MA.SPC
[sigmove 08:01:13 DEBUG] transformed Z148Mb.SPC -> Z148MB.SPC
[sigmove 08:01:13 DEBUG] transformed Z148Mc.SPC -> Z148MC.SPC
[sigmove 08:01:13 DEBUG] transformed Z148Md.SPC -> Z148MD.SPC
[sigmove 08:01:13 DEBUG] transformed Z148Me.SPC -> Z148ME.SPC
[sigmove 08:01:13 DEBUG] transformed Z148Mf.SPC -> Z148MF.SPC
[Status 08:01:13 INFO] data for Z148 transferred to science data processing
[Tidy 08:01:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:01:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:01:13 INFO] resetting WatchDogTimer
[Status 08:01:13 INFO] Starting Set [AERI set: name H149, 6 scans, 60 angle, D22500 command]
[Ingest 08:01:13 INFO] Sending XML status message
[Status 08:01:13 INFO] Mirror angle: 60
[Mirror 08:01:13 INFO] rotating to position H
[Status 08:01:14 INFO] .SET file for ACQ96 ready
[Ingest 08:01:14 INFO] Starting acquisition
[Status 08:01:14 INFO] reading housekeeping
[Status 08:01:32 INFO] acquire complete
[Status 08:01:33 INFO] writing housekeeping
[Sequencer 08:01:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:01:33 INFO] incremented H scene to 149 completed views
[Sequencer 08:01:33 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:01:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:01:33 INFO] incremented to [AERI set: name A149, 6 scans, 120 angle, D28300 command] set
[sigmove 08:01:33 INFO] H149.SIG(18)
[sigmove 08:01:33 DEBUG] transformed H149Ma.SPC -> H149MA.SPC
[sigmove 08:01:33 DEBUG] transformed H149Mb.SPC -> H149MB.SPC
[sigmove 08:01:33 DEBUG] transformed H149Mc.SPC -> H149MC.SPC
[sigmove 08:01:33 DEBUG] transformed H149Md.SPC -> H149MD.SPC
[sigmove 08:01:33 DEBUG] transformed H149Me.SPC -> H149ME.SPC
[sigmove 08:01:33 DEBUG] transformed H149Mf.SPC -> H149MF.SPC
[Status 08:01:33 INFO] data for H149 transferred to science data processing
[Tidy 08:01:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:01:33 INFO] A147.FIN(19),H147.FIN(19),S147.FIN(19),T147.FIN(19),U147.FIN(19),V147.FIN(19),W147.FIN(19),X147.FIN(19),Y147.FIN(19),Z147.FIN(19),A148.FIN(19),H148.FIN(19),S148.FIN(19),T148.FIN(19),U148.FIN(19),V148.FIN(19),W148.FIN(19),X148.FIN(19),Y148.FIN(19),Z148.FIN(19)
[sigmove 08:01:33 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:01:33 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:01:36 DEBUG] done zipping
[WatchDog 08:01:36 INFO] resetting WatchDogTimer
[Status 08:01:36 INFO] Starting Set [AERI set: name A149, 6 scans, 120 angle, D28300 command]
[Ingest 08:01:36 INFO] Sending XML status message
[Status 08:01:36 INFO] Mirror angle: 120
[Mirror 08:01:36 INFO] rotating to position A
[Status 08:01:37 INFO] .SET file for ACQ96 ready
[Ingest 08:01:37 INFO] Starting acquisition
[Status 08:01:37 INFO] reading housekeeping
[Status 08:01:55 INFO] acquire complete
[Status 08:01:55 INFO] writing housekeeping
[Sequencer 08:01:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:01:55 INFO] incremented A scene to 149 completed views
[Sequencer 08:01:55 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:01:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:01:55 INFO] incremented to [AERI set: name S149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:01:55 INFO] A149.SIG(18)
[sigmove 08:01:55 DEBUG] transformed A149Ma.SPC -> A149MA.SPC
[sigmove 08:01:55 DEBUG] transformed A149Mb.SPC -> A149MB.SPC
[sigmove 08:01:55 DEBUG] transformed A149Mc.SPC -> A149MC.SPC
[sigmove 08:01:55 DEBUG] transformed A149Md.SPC -> A149MD.SPC
[sigmove 08:01:55 DEBUG] transformed A149Me.SPC -> A149ME.SPC
[sigmove 08:01:55 DEBUG] transformed A149Mf.SPC -> A149MF.SPC
[Status 08:01:55 INFO] data for A149 transferred to science data processing
[Tidy 08:01:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:01:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:01:55 INFO] resetting WatchDogTimer
[Status 08:01:56 INFO] Starting Set [AERI set: name S149, 6 scans, 0 angle, D16300 command]
[Ingest 08:01:56 INFO] Sending XML status message
[Status 08:01:56 INFO] Mirror angle: 0
[Mirror 08:01:56 INFO] rotating to position S
[Status 08:01:57 INFO] .SET file for ACQ96 ready
[Ingest 08:01:57 INFO] Starting acquisition
[Status 08:01:57 INFO] reading housekeeping
[Status 08:02:15 INFO] acquire complete
[Status 08:02:16 INFO] writing housekeeping
[Sequencer 08:02:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:02:16 INFO] incremented S scene to 149 completed views
[Sequencer 08:02:16 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:02:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:02:16 INFO] incremented to [AERI set: name T149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:02:16 INFO] S149.SIG(18)
[sigmove 08:02:16 DEBUG] transformed S149Ma.SPC -> S149MA.SPC
[sigmove 08:02:16 DEBUG] transformed S149Mb.SPC -> S149MB.SPC
[sigmove 08:02:16 DEBUG] transformed S149Mc.SPC -> S149MC.SPC
[sigmove 08:02:16 DEBUG] transformed S149Md.SPC -> S149MD.SPC
[sigmove 08:02:16 DEBUG] transformed S149Me.SPC -> S149ME.SPC
[sigmove 08:02:16 DEBUG] transformed S149Mf.SPC -> S149MF.SPC
[Status 08:02:16 INFO] data for S149 transferred to science data processing
[Tidy 08:02:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:02:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:02:16 INFO] resetting WatchDogTimer
[Status 08:02:16 INFO] Starting Set [AERI set: name T149, 6 scans, 0 angle, D16300 command]
[Ingest 08:02:16 INFO] Sending XML status message
[Status 08:02:16 INFO] Mirror angle: 0
[Mirror 08:02:16 INFO] rotating to position T
[Status 08:02:16 INFO] .SET file for ACQ96 ready
[Ingest 08:02:17 INFO] Starting acquisition
[Status 08:02:17 INFO] reading housekeeping
[Status 08:02:35 INFO] acquire complete
[Status 08:02:36 INFO] writing housekeeping
[Sequencer 08:02:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:02:36 INFO] incremented T scene to 149 completed views
[Sequencer 08:02:36 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:02:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:02:36 INFO] incremented to [AERI set: name U149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:02:36 INFO] T149.SIG(18)
[sigmove 08:02:36 DEBUG] transformed T149Ma.SPC -> T149MA.SPC
[sigmove 08:02:36 DEBUG] transformed T149Mb.SPC -> T149MB.SPC
[sigmove 08:02:36 DEBUG] transformed T149Mc.SPC -> T149MC.SPC
[sigmove 08:02:36 DEBUG] transformed T149Md.SPC -> T149MD.SPC
[sigmove 08:02:36 DEBUG] transformed T149Me.SPC -> T149ME.SPC
[sigmove 08:02:36 DEBUG] transformed T149Mf.SPC -> T149MF.SPC
[Status 08:02:36 INFO] data for T149 transferred to science data processing
[Tidy 08:02:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:02:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:02:36 INFO] resetting WatchDogTimer
[Status 08:02:36 INFO] Starting Set [AERI set: name U149, 6 scans, 0 angle, D16300 command]
[Ingest 08:02:36 INFO] Sending XML status message
[Status 08:02:36 INFO] Mirror angle: 0
[Mirror 08:02:36 INFO] rotating to position U
[Status 08:02:37 INFO] .SET file for ACQ96 ready
[Ingest 08:02:37 INFO] Starting acquisition
[Status 08:02:37 INFO] reading housekeeping
[Status 08:02:55 INFO] acquire complete
[Status 08:02:56 INFO] writing housekeeping
[Sequencer 08:02:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:02:56 INFO] incremented U scene to 149 completed views
[Sequencer 08:02:56 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:02:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:02:56 INFO] incremented to [AERI set: name V149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:02:56 INFO] U149.SIG(18)
[sigmove 08:02:56 DEBUG] transformed U149Ma.SPC -> U149MA.SPC
[sigmove 08:02:56 DEBUG] transformed U149Mb.SPC -> U149MB.SPC
[sigmove 08:02:56 DEBUG] transformed U149Mc.SPC -> U149MC.SPC
[sigmove 08:02:56 DEBUG] transformed U149Md.SPC -> U149MD.SPC
[sigmove 08:02:56 DEBUG] transformed U149Me.SPC -> U149ME.SPC
[sigmove 08:02:56 DEBUG] transformed U149Mf.SPC -> U149MF.SPC
[Status 08:02:56 INFO] data for U149 transferred to science data processing
[Tidy 08:02:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:02:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:02:56 INFO] resetting WatchDogTimer
[Status 08:02:56 INFO] Starting Set [AERI set: name V149, 6 scans, 0 angle, D16300 command]
[Ingest 08:02:56 INFO] Sending XML status message
[Status 08:02:56 INFO] Mirror angle: 0
[Mirror 08:02:56 INFO] rotating to position V
[Status 08:02:57 INFO] .SET file for ACQ96 ready
[Ingest 08:02:57 INFO] Starting acquisition
[Status 08:02:57 INFO] reading housekeeping
[Status 08:03:14 INFO] acquire complete
[Status 08:03:15 INFO] writing housekeeping
[Sequencer 08:03:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:03:15 INFO] incremented V scene to 149 completed views
[Sequencer 08:03:15 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:03:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:03:15 INFO] incremented to [AERI set: name W149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:03:15 INFO] V149.SIG(18)
[sigmove 08:03:15 DEBUG] transformed V149Ma.SPC -> V149MA.SPC
[sigmove 08:03:15 DEBUG] transformed V149Mb.SPC -> V149MB.SPC
[sigmove 08:03:15 DEBUG] transformed V149Mc.SPC -> V149MC.SPC
[sigmove 08:03:15 DEBUG] transformed V149Md.SPC -> V149MD.SPC
[sigmove 08:03:15 DEBUG] transformed V149Me.SPC -> V149ME.SPC
[sigmove 08:03:15 DEBUG] transformed V149Mf.SPC -> V149MF.SPC
[Status 08:03:15 INFO] data for V149 transferred to science data processing
[Tidy 08:03:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:03:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:03:15 INFO] resetting WatchDogTimer
[Status 08:03:15 INFO] Starting Set [AERI set: name W149, 6 scans, 0 angle, D16300 command]
[Ingest 08:03:15 INFO] Sending XML status message
[Status 08:03:15 INFO] Mirror angle: 0
[Mirror 08:03:15 INFO] rotating to position W
[Status 08:03:16 INFO] .SET file for ACQ96 ready
[Ingest 08:03:16 INFO] Starting acquisition
[Status 08:03:16 INFO] reading housekeeping
[Status 08:03:33 INFO] acquire complete
[Status 08:03:34 INFO] writing housekeeping
[Sequencer 08:03:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:03:34 INFO] incremented W scene to 149 completed views
[Sequencer 08:03:34 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:03:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:03:34 INFO] incremented to [AERI set: name X149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:03:34 INFO] W149.SIG(18)
[sigmove 08:03:34 DEBUG] transformed W149Ma.SPC -> W149MA.SPC
[sigmove 08:03:34 DEBUG] transformed W149Mb.SPC -> W149MB.SPC
[sigmove 08:03:34 DEBUG] transformed W149Mc.SPC -> W149MC.SPC
[sigmove 08:03:34 DEBUG] transformed W149Md.SPC -> W149MD.SPC
[sigmove 08:03:34 DEBUG] transformed W149Me.SPC -> W149ME.SPC
[sigmove 08:03:34 DEBUG] transformed W149Mf.SPC -> W149MF.SPC
[Status 08:03:34 INFO] data for W149 transferred to science data processing
[Tidy 08:03:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:03:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:03:34 INFO] resetting WatchDogTimer
[Status 08:03:34 INFO] Starting Set [AERI set: name X149, 6 scans, 0 angle, D16300 command]
[Ingest 08:03:34 INFO] Sending XML status message
[Status 08:03:34 INFO] Mirror angle: 0
[Mirror 08:03:34 INFO] rotating to position X
[Status 08:03:35 INFO] .SET file for ACQ96 ready
[Ingest 08:03:35 INFO] Starting acquisition
[Status 08:03:35 INFO] reading housekeeping
[Status 08:03:53 INFO] acquire complete
[Status 08:03:53 INFO] writing housekeeping
[Sequencer 08:03:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:03:53 INFO] incremented X scene to 149 completed views
[Sequencer 08:03:53 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:03:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:03:53 INFO] incremented to [AERI set: name Y149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:03:53 INFO] X149.SIG(18)
[sigmove 08:03:53 DEBUG] transformed X149Ma.SPC -> X149MA.SPC
[sigmove 08:03:53 DEBUG] transformed X149Mb.SPC -> X149MB.SPC
[sigmove 08:03:53 DEBUG] transformed X149Mc.SPC -> X149MC.SPC
[sigmove 08:03:53 DEBUG] transformed X149Md.SPC -> X149MD.SPC
[sigmove 08:03:53 DEBUG] transformed X149Me.SPC -> X149ME.SPC
[sigmove 08:03:53 DEBUG] transformed X149Mf.SPC -> X149MF.SPC
[Status 08:03:53 INFO] data for X149 transferred to science data processing
[Tidy 08:03:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:03:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:03:53 INFO] resetting WatchDogTimer
[Status 08:03:53 INFO] Starting Set [AERI set: name Y149, 6 scans, 0 angle, D16300 command]
[Ingest 08:03:53 INFO] Sending XML status message
[Status 08:03:53 INFO] Mirror angle: 0
[Mirror 08:03:54 INFO] rotating to position Y
[Status 08:03:54 INFO] .SET file for ACQ96 ready
[Ingest 08:03:54 INFO] Starting acquisition
[Status 08:03:54 INFO] reading housekeeping
[Status 08:04:12 INFO] acquire complete
[Status 08:04:12 INFO] writing housekeeping
[Sequencer 08:04:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:04:12 INFO] incremented Y scene to 149 completed views
[Sequencer 08:04:12 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:04:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:04:12 INFO] incremented to [AERI set: name Z149, 6 scans, 0 angle, D16300 command] set
[sigmove 08:04:12 INFO] Y149.SIG(18)
[sigmove 08:04:12 DEBUG] transformed Y149Ma.SPC -> Y149MA.SPC
[sigmove 08:04:12 DEBUG] transformed Y149Mb.SPC -> Y149MB.SPC
[sigmove 08:04:12 DEBUG] transformed Y149Mc.SPC -> Y149MC.SPC
[sigmove 08:04:12 DEBUG] transformed Y149Md.SPC -> Y149MD.SPC
[sigmove 08:04:12 DEBUG] transformed Y149Me.SPC -> Y149ME.SPC
[sigmove 08:04:12 DEBUG] transformed Y149Mf.SPC -> Y149MF.SPC
[Status 08:04:12 INFO] data for Y149 transferred to science data processing
[Tidy 08:04:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:04:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:04:12 INFO] resetting WatchDogTimer
[Status 08:04:12 INFO] Starting Set [AERI set: name Z149, 6 scans, 0 angle, D16300 command]
[Ingest 08:04:12 INFO] Sending XML status message
[Status 08:04:13 INFO] Mirror angle: 0
[Mirror 08:04:13 INFO] rotating to position Z
[Status 08:04:13 INFO] .SET file for ACQ96 ready
[Ingest 08:04:13 INFO] Starting acquisition
[Status 08:04:13 INFO] reading housekeeping
[Status 08:04:31 INFO] acquire complete
[Status 08:04:31 INFO] writing housekeeping
[Sequencer 08:04:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:04:31 INFO] incremented Z scene to 149 completed views
[Sequencer 08:04:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:04:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:04:31 INFO] incremented to [AERI set: name A150, 6 scans, 120 angle, D28300 command] set
[sigmove 08:04:31 INFO] Z149.SIG(18)
[sigmove 08:04:31 DEBUG] transformed Z149Ma.SPC -> Z149MA.SPC
[sigmove 08:04:31 DEBUG] transformed Z149Mb.SPC -> Z149MB.SPC
[sigmove 08:04:31 DEBUG] transformed Z149Mc.SPC -> Z149MC.SPC
[sigmove 08:04:31 DEBUG] transformed Z149Md.SPC -> Z149MD.SPC
[sigmove 08:04:31 DEBUG] transformed Z149Me.SPC -> Z149ME.SPC
[sigmove 08:04:31 DEBUG] transformed Z149Mf.SPC -> Z149MF.SPC
[Status 08:04:31 INFO] data for Z149 transferred to science data processing
[Tidy 08:04:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:04:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:04:31 INFO] resetting WatchDogTimer
[Status 08:04:32 INFO] Starting Set [AERI set: name A150, 6 scans, 120 angle, D28300 command]
[Ingest 08:04:32 INFO] Sending XML status message
[Status 08:04:32 INFO] Mirror angle: 120
[Mirror 08:04:32 INFO] rotating to position A
[Status 08:04:33 INFO] .SET file for ACQ96 ready
[Ingest 08:04:33 INFO] Starting acquisition
[Status 08:04:33 INFO] reading housekeeping
[Status 08:04:51 INFO] acquire complete
[Status 08:04:52 INFO] writing housekeeping
[Sequencer 08:04:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:04:52 INFO] incremented A scene to 150 completed views
[Sequencer 08:04:52 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:04:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:04:52 INFO] incremented to [AERI set: name H150, 6 scans, 60 angle, D22500 command] set
[sigmove 08:04:52 INFO] A150.SIG(18)
[sigmove 08:04:52 DEBUG] transformed A150Ma.SPC -> A150MA.SPC
[sigmove 08:04:52 DEBUG] transformed A150Mb.SPC -> A150MB.SPC
[sigmove 08:04:52 DEBUG] transformed A150Mc.SPC -> A150MC.SPC
[sigmove 08:04:52 DEBUG] transformed A150Md.SPC -> A150MD.SPC
[sigmove 08:04:52 DEBUG] transformed A150Me.SPC -> A150ME.SPC
[sigmove 08:04:52 DEBUG] transformed A150Mf.SPC -> A150MF.SPC
[Status 08:04:52 INFO] data for A150 transferred to science data processing
[Tidy 08:04:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:04:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:04:52 INFO] resetting WatchDogTimer
[Status 08:04:52 INFO] Starting Set [AERI set: name H150, 6 scans, 60 angle, D22500 command]
[Ingest 08:04:52 INFO] Sending XML status message
[Status 08:04:52 INFO] Mirror angle: 60
[Mirror 08:04:52 INFO] rotating to position H
[Status 08:04:53 INFO] .SET file for ACQ96 ready
[Ingest 08:04:53 INFO] Starting acquisition
[Status 08:04:53 INFO] reading housekeeping
[Status 08:05:11 INFO] acquire complete
[Status 08:05:12 INFO] writing housekeeping
[Sequencer 08:05:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:05:12 INFO] incremented H scene to 150 completed views
[Sequencer 08:05:12 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:05:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:05:12 INFO] incremented to [AERI set: name S150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:05:12 INFO] H150.SIG(18)
[sigmove 08:05:12 DEBUG] transformed H150Ma.SPC -> H150MA.SPC
[sigmove 08:05:12 DEBUG] transformed H150Mb.SPC -> H150MB.SPC
[sigmove 08:05:12 DEBUG] transformed H150Mc.SPC -> H150MC.SPC
[sigmove 08:05:12 DEBUG] transformed H150Md.SPC -> H150MD.SPC
[sigmove 08:05:12 DEBUG] transformed H150Me.SPC -> H150ME.SPC
[sigmove 08:05:12 DEBUG] transformed H150Mf.SPC -> H150MF.SPC
[Status 08:05:12 INFO] data for H150 transferred to science data processing
[Tidy 08:05:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:05:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:05:12 INFO] resetting WatchDogTimer
[Status 08:05:12 INFO] Starting Set [AERI set: name S150, 6 scans, 0 angle, D16300 command]
[Ingest 08:05:12 INFO] Sending XML status message
[Status 08:05:12 INFO] Mirror angle: 0
[Mirror 08:05:12 INFO] rotating to position S
[Status 08:05:13 INFO] .SET file for ACQ96 ready
[Ingest 08:05:13 INFO] Starting acquisition
[Status 08:05:13 INFO] reading housekeeping
[Status 08:05:31 INFO] acquire complete
[Status 08:05:32 INFO] writing housekeeping
[Sequencer 08:05:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:05:32 INFO] incremented S scene to 150 completed views
[Sequencer 08:05:32 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:05:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:05:32 INFO] incremented to [AERI set: name T150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:05:32 INFO] S150.SIG(18)
[sigmove 08:05:32 DEBUG] transformed S150Ma.SPC -> S150MA.SPC
[sigmove 08:05:32 DEBUG] transformed S150Mb.SPC -> S150MB.SPC
[sigmove 08:05:32 DEBUG] transformed S150Mc.SPC -> S150MC.SPC
[sigmove 08:05:32 DEBUG] transformed S150Md.SPC -> S150MD.SPC
[sigmove 08:05:32 DEBUG] transformed S150Me.SPC -> S150ME.SPC
[sigmove 08:05:32 DEBUG] transformed S150Mf.SPC -> S150MF.SPC
[Status 08:05:32 INFO] data for S150 transferred to science data processing
[Tidy 08:05:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:05:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:05:32 INFO] resetting WatchDogTimer
[Status 08:05:32 INFO] Starting Set [AERI set: name T150, 6 scans, 0 angle, D16300 command]
[Ingest 08:05:32 INFO] Sending XML status message
[Status 08:05:32 INFO] Mirror angle: 0
[Mirror 08:05:32 INFO] rotating to position T
[Status 08:05:33 INFO] .SET file for ACQ96 ready
[Ingest 08:05:33 INFO] Starting acquisition
[Status 08:05:33 INFO] reading housekeeping
[Status 08:05:50 INFO] acquire complete
[Status 08:05:51 INFO] writing housekeeping
[Sequencer 08:05:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:05:51 INFO] incremented T scene to 150 completed views
[Sequencer 08:05:51 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:05:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:05:51 INFO] incremented to [AERI set: name U150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:05:51 INFO] T150.SIG(18)
[sigmove 08:05:51 DEBUG] transformed T150Ma.SPC -> T150MA.SPC
[sigmove 08:05:51 DEBUG] transformed T150Mb.SPC -> T150MB.SPC
[sigmove 08:05:51 DEBUG] transformed T150Mc.SPC -> T150MC.SPC
[sigmove 08:05:51 DEBUG] transformed T150Md.SPC -> T150MD.SPC
[sigmove 08:05:51 DEBUG] transformed T150Me.SPC -> T150ME.SPC
[sigmove 08:05:51 DEBUG] transformed T150Mf.SPC -> T150MF.SPC
[Status 08:05:51 INFO] data for T150 transferred to science data processing
[Tidy 08:05:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:05:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:05:51 INFO] resetting WatchDogTimer
[Status 08:05:51 INFO] Starting Set [AERI set: name U150, 6 scans, 0 angle, D16300 command]
[Ingest 08:05:51 INFO] Sending XML status message
[Status 08:05:51 INFO] Mirror angle: 0
[Mirror 08:05:51 INFO] rotating to position U
[Status 08:05:52 INFO] .SET file for ACQ96 ready
[Ingest 08:05:52 INFO] Starting acquisition
[Status 08:05:52 INFO] reading housekeeping
[Status 08:06:09 INFO] acquire complete
[Status 08:06:10 INFO] writing housekeeping
[Sequencer 08:06:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:06:10 INFO] incremented U scene to 150 completed views
[Sequencer 08:06:10 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:06:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:06:10 INFO] incremented to [AERI set: name V150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:06:10 INFO] U150.SIG(18)
[sigmove 08:06:10 DEBUG] transformed U150Ma.SPC -> U150MA.SPC
[sigmove 08:06:10 DEBUG] transformed U150Mb.SPC -> U150MB.SPC
[sigmove 08:06:10 DEBUG] transformed U150Mc.SPC -> U150MC.SPC
[sigmove 08:06:10 DEBUG] transformed U150Md.SPC -> U150MD.SPC
[sigmove 08:06:10 DEBUG] transformed U150Me.SPC -> U150ME.SPC
[sigmove 08:06:10 DEBUG] transformed U150Mf.SPC -> U150MF.SPC
[Status 08:06:10 INFO] data for U150 transferred to science data processing
[Tidy 08:06:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:06:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:06:10 INFO] resetting WatchDogTimer
[Status 08:06:10 INFO] Starting Set [AERI set: name V150, 6 scans, 0 angle, D16300 command]
[Ingest 08:06:10 INFO] Sending XML status message
[Status 08:06:10 INFO] Mirror angle: 0
[Mirror 08:06:11 INFO] rotating to position V
[Status 08:06:11 INFO] .SET file for ACQ96 ready
[Ingest 08:06:11 INFO] Starting acquisition
[Status 08:06:11 INFO] reading housekeeping
[Status 08:06:29 INFO] acquire complete
[Status 08:06:29 INFO] writing housekeeping
[Sequencer 08:06:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:06:29 INFO] incremented V scene to 150 completed views
[Sequencer 08:06:29 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:06:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:06:29 INFO] incremented to [AERI set: name W150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:06:29 INFO] V150.SIG(18)
[sigmove 08:06:29 DEBUG] transformed V150Ma.SPC -> V150MA.SPC
[sigmove 08:06:29 DEBUG] transformed V150Mb.SPC -> V150MB.SPC
[sigmove 08:06:29 DEBUG] transformed V150Mc.SPC -> V150MC.SPC
[sigmove 08:06:29 DEBUG] transformed V150Md.SPC -> V150MD.SPC
[sigmove 08:06:29 DEBUG] transformed V150Me.SPC -> V150ME.SPC
[sigmove 08:06:29 DEBUG] transformed V150Mf.SPC -> V150MF.SPC
[Status 08:06:29 INFO] data for V150 transferred to science data processing
[Tidy 08:06:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:06:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:06:29 INFO] resetting WatchDogTimer
[Status 08:06:29 INFO] Starting Set [AERI set: name W150, 6 scans, 0 angle, D16300 command]
[Ingest 08:06:29 INFO] Sending XML status message
[Status 08:06:29 INFO] Mirror angle: 0
[Mirror 08:06:30 INFO] rotating to position W
[Status 08:06:30 INFO] .SET file for ACQ96 ready
[Ingest 08:06:30 INFO] Starting acquisition
[Status 08:06:30 INFO] reading housekeeping
[Status 08:06:48 INFO] acquire complete
[Status 08:06:48 INFO] writing housekeeping
[Sequencer 08:06:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:06:48 INFO] incremented W scene to 150 completed views
[Sequencer 08:06:48 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:06:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:06:48 INFO] incremented to [AERI set: name X150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:06:48 INFO] W150.SIG(18)
[sigmove 08:06:48 DEBUG] transformed W150Ma.SPC -> W150MA.SPC
[sigmove 08:06:48 DEBUG] transformed W150Mb.SPC -> W150MB.SPC
[sigmove 08:06:48 DEBUG] transformed W150Mc.SPC -> W150MC.SPC
[sigmove 08:06:48 DEBUG] transformed W150Md.SPC -> W150MD.SPC
[sigmove 08:06:48 DEBUG] transformed W150Me.SPC -> W150ME.SPC
[sigmove 08:06:48 DEBUG] transformed W150Mf.SPC -> W150MF.SPC
[Status 08:06:48 INFO] data for W150 transferred to science data processing
[Tidy 08:06:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:06:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:06:48 INFO] resetting WatchDogTimer
[Status 08:06:49 INFO] Starting Set [AERI set: name X150, 6 scans, 0 angle, D16300 command]
[Ingest 08:06:49 INFO] Sending XML status message
[Status 08:06:49 INFO] Mirror angle: 0
[Mirror 08:06:49 INFO] rotating to position X
[Status 08:06:49 INFO] .SET file for ACQ96 ready
[Ingest 08:06:49 INFO] Starting acquisition
[Status 08:06:49 INFO] reading housekeeping
[Status 08:07:07 INFO] acquire complete
[Status 08:07:07 INFO] writing housekeeping
[Sequencer 08:07:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:07:07 INFO] incremented X scene to 150 completed views
[Sequencer 08:07:07 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:07:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:07:07 INFO] incremented to [AERI set: name Y150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:07:07 INFO] X150.SIG(18)
[sigmove 08:07:07 DEBUG] transformed X150Ma.SPC -> X150MA.SPC
[sigmove 08:07:07 DEBUG] transformed X150Mb.SPC -> X150MB.SPC
[sigmove 08:07:07 DEBUG] transformed X150Mc.SPC -> X150MC.SPC
[sigmove 08:07:07 DEBUG] transformed X150Md.SPC -> X150MD.SPC
[sigmove 08:07:07 DEBUG] transformed X150Me.SPC -> X150ME.SPC
[sigmove 08:07:07 DEBUG] transformed X150Mf.SPC -> X150MF.SPC
[Status 08:07:07 INFO] data for X150 transferred to science data processing
[Tidy 08:07:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:07:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:07:07 INFO] resetting WatchDogTimer
[Status 08:07:08 INFO] Starting Set [AERI set: name Y150, 6 scans, 0 angle, D16300 command]
[Ingest 08:07:08 INFO] Sending XML status message
[Status 08:07:08 INFO] Mirror angle: 0
[Mirror 08:07:08 INFO] rotating to position Y
[Status 08:07:08 INFO] .SET file for ACQ96 ready
[Ingest 08:07:08 INFO] Starting acquisition
[Status 08:07:08 INFO] reading housekeeping
[Status 08:07:26 INFO] acquire complete
[Status 08:07:26 INFO] writing housekeeping
[Sequencer 08:07:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:07:26 INFO] incremented Y scene to 150 completed views
[Sequencer 08:07:26 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:07:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:07:26 INFO] incremented to [AERI set: name Z150, 6 scans, 0 angle, D16300 command] set
[sigmove 08:07:26 INFO] Y150.SIG(18)
[sigmove 08:07:26 DEBUG] transformed Y150Ma.SPC -> Y150MA.SPC
[sigmove 08:07:26 DEBUG] transformed Y150Mb.SPC -> Y150MB.SPC
[sigmove 08:07:26 DEBUG] transformed Y150Mc.SPC -> Y150MC.SPC
[sigmove 08:07:26 DEBUG] transformed Y150Md.SPC -> Y150MD.SPC
[sigmove 08:07:26 DEBUG] transformed Y150Me.SPC -> Y150ME.SPC
[sigmove 08:07:26 DEBUG] transformed Y150Mf.SPC -> Y150MF.SPC
[Status 08:07:26 INFO] data for Y150 transferred to science data processing
[Tidy 08:07:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:07:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:07:26 INFO] resetting WatchDogTimer
[Status 08:07:27 INFO] Starting Set [AERI set: name Z150, 6 scans, 0 angle, D16300 command]
[Ingest 08:07:27 INFO] Sending XML status message
[Status 08:07:27 INFO] Mirror angle: 0
[Mirror 08:07:27 INFO] rotating to position Z
[Status 08:07:27 INFO] .SET file for ACQ96 ready
[Ingest 08:07:27 INFO] Starting acquisition
[Status 08:07:28 INFO] reading housekeeping
[Status 08:07:45 INFO] acquire complete
[Status 08:07:46 INFO] writing housekeeping
[Sequencer 08:07:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:07:46 INFO] incremented Z scene to 150 completed views
[Sequencer 08:07:46 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:07:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:07:46 INFO] incremented to [AERI set: name H151, 6 scans, 60 angle, D22500 command] set
[sigmove 08:07:46 INFO] Z150.SIG(18)
[sigmove 08:07:46 DEBUG] transformed Z150Ma.SPC -> Z150MA.SPC
[sigmove 08:07:46 DEBUG] transformed Z150Mb.SPC -> Z150MB.SPC
[sigmove 08:07:46 DEBUG] transformed Z150Mc.SPC -> Z150MC.SPC
[sigmove 08:07:46 DEBUG] transformed Z150Md.SPC -> Z150MD.SPC
[sigmove 08:07:46 DEBUG] transformed Z150Me.SPC -> Z150ME.SPC
[sigmove 08:07:46 DEBUG] transformed Z150Mf.SPC -> Z150MF.SPC
[Status 08:07:46 INFO] data for Z150 transferred to science data processing
[Tidy 08:07:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:07:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:07:46 INFO] resetting WatchDogTimer
[Status 08:07:46 INFO] Starting Set [AERI set: name H151, 6 scans, 60 angle, D22500 command]
[Ingest 08:07:46 INFO] Sending XML status message
[Status 08:07:46 INFO] Mirror angle: 60
[Mirror 08:07:46 INFO] rotating to position H
[Status 08:07:47 INFO] .SET file for ACQ96 ready
[Ingest 08:07:47 INFO] Starting acquisition
[Status 08:07:47 INFO] reading housekeeping
[Status 08:08:05 INFO] acquire complete
[Status 08:08:06 INFO] writing housekeeping
[Sequencer 08:08:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:08:06 INFO] incremented H scene to 151 completed views
[Sequencer 08:08:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:08:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:08:06 INFO] incremented to [AERI set: name A151, 6 scans, 120 angle, D28300 command] set
[sigmove 08:08:06 INFO] H151.SIG(18)
[sigmove 08:08:06 DEBUG] transformed H151Ma.SPC -> H151MA.SPC
[sigmove 08:08:06 DEBUG] transformed H151Mb.SPC -> H151MB.SPC
[sigmove 08:08:06 DEBUG] transformed H151Mc.SPC -> H151MC.SPC
[sigmove 08:08:06 DEBUG] transformed H151Md.SPC -> H151MD.SPC
[sigmove 08:08:06 DEBUG] transformed H151Me.SPC -> H151ME.SPC
[sigmove 08:08:06 DEBUG] transformed H151Mf.SPC -> H151MF.SPC
[Status 08:08:06 INFO] data for H151 transferred to science data processing
[Tidy 08:08:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:08:06 INFO] A149.FIN(19),H149.FIN(19),S149.FIN(19),T149.FIN(19),U149.FIN(19),V149.FIN(19),W149.FIN(19),X149.FIN(19),Y149.FIN(19),Z149.FIN(19),A150.FIN(19),H150.FIN(19),S150.FIN(19),T150.FIN(19),U150.FIN(19),V150.FIN(19),W150.FIN(19),X150.FIN(19),Y150.FIN(19),Z150.FIN(19)
[sigmove 08:08:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:08:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:08:09 DEBUG] done zipping
[WatchDog 08:08:09 INFO] resetting WatchDogTimer
[Status 08:08:09 INFO] Starting Set [AERI set: name A151, 6 scans, 120 angle, D28300 command]
[Ingest 08:08:09 INFO] Sending XML status message
[Status 08:08:09 INFO] Mirror angle: 120
[Mirror 08:08:09 INFO] rotating to position A
[Status 08:08:10 INFO] .SET file for ACQ96 ready
[Ingest 08:08:10 INFO] Starting acquisition
[Status 08:08:10 INFO] reading housekeeping
[Status 08:08:29 INFO] acquire complete
[Status 08:08:29 INFO] writing housekeeping
[Sequencer 08:08:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:08:29 INFO] incremented A scene to 151 completed views
[Sequencer 08:08:29 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:08:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:08:29 INFO] incremented to [AERI set: name S151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:08:29 INFO] A151.SIG(18)
[sigmove 08:08:29 DEBUG] transformed A151Ma.SPC -> A151MA.SPC
[sigmove 08:08:29 DEBUG] transformed A151Mb.SPC -> A151MB.SPC
[sigmove 08:08:29 DEBUG] transformed A151Mc.SPC -> A151MC.SPC
[sigmove 08:08:29 DEBUG] transformed A151Md.SPC -> A151MD.SPC
[sigmove 08:08:29 DEBUG] transformed A151Me.SPC -> A151ME.SPC
[sigmove 08:08:29 DEBUG] transformed A151Mf.SPC -> A151MF.SPC
[Status 08:08:29 INFO] data for A151 transferred to science data processing
[Tidy 08:08:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:08:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:08:29 INFO] resetting WatchDogTimer
[Status 08:08:30 INFO] Starting Set [AERI set: name S151, 6 scans, 0 angle, D16300 command]
[Ingest 08:08:30 INFO] Sending XML status message
[Status 08:08:30 INFO] Mirror angle: 0
[Mirror 08:08:30 INFO] rotating to position S
[Status 08:08:31 INFO] .SET file for ACQ96 ready
[Ingest 08:08:31 INFO] Starting acquisition
[Status 08:08:31 INFO] reading housekeeping
[Status 08:08:49 INFO] acquire complete
[Status 08:08:50 INFO] writing housekeeping
[Sequencer 08:08:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:08:50 INFO] incremented S scene to 151 completed views
[Sequencer 08:08:50 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:08:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:08:50 INFO] incremented to [AERI set: name T151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:08:50 INFO] S151.SIG(18)
[sigmove 08:08:50 DEBUG] transformed S151Ma.SPC -> S151MA.SPC
[sigmove 08:08:50 DEBUG] transformed S151Mb.SPC -> S151MB.SPC
[sigmove 08:08:50 DEBUG] transformed S151Mc.SPC -> S151MC.SPC
[sigmove 08:08:50 DEBUG] transformed S151Md.SPC -> S151MD.SPC
[sigmove 08:08:50 DEBUG] transformed S151Me.SPC -> S151ME.SPC
[sigmove 08:08:50 DEBUG] transformed S151Mf.SPC -> S151MF.SPC
[Status 08:08:50 INFO] data for S151 transferred to science data processing
[Tidy 08:08:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:08:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:08:50 INFO] resetting WatchDogTimer
[Status 08:08:50 INFO] Starting Set [AERI set: name T151, 6 scans, 0 angle, D16300 command]
[Ingest 08:08:50 INFO] Sending XML status message
[Status 08:08:50 INFO] Mirror angle: 0
[Mirror 08:08:50 INFO] rotating to position T
[Status 08:08:50 INFO] .SET file for ACQ96 ready
[Ingest 08:08:50 INFO] Starting acquisition
[Status 08:08:51 INFO] reading housekeeping
[Status 08:09:08 INFO] acquire complete
[Status 08:09:09 INFO] writing housekeeping
[Sequencer 08:09:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:09:09 INFO] incremented T scene to 151 completed views
[Sequencer 08:09:09 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:09:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:09:09 INFO] incremented to [AERI set: name U151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:09:09 INFO] T151.SIG(18)
[sigmove 08:09:09 DEBUG] transformed T151Ma.SPC -> T151MA.SPC
[sigmove 08:09:09 DEBUG] transformed T151Mb.SPC -> T151MB.SPC
[sigmove 08:09:09 DEBUG] transformed T151Mc.SPC -> T151MC.SPC
[sigmove 08:09:09 DEBUG] transformed T151Md.SPC -> T151MD.SPC
[sigmove 08:09:09 DEBUG] transformed T151Me.SPC -> T151ME.SPC
[sigmove 08:09:09 DEBUG] transformed T151Mf.SPC -> T151MF.SPC
[Status 08:09:09 INFO] data for T151 transferred to science data processing
[Tidy 08:09:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:09:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:09:09 INFO] resetting WatchDogTimer
[Status 08:09:09 INFO] Starting Set [AERI set: name U151, 6 scans, 0 angle, D16300 command]
[Ingest 08:09:09 INFO] Sending XML status message
[Status 08:09:09 INFO] Mirror angle: 0
[Mirror 08:09:09 INFO] rotating to position U
[Status 08:09:09 INFO] .SET file for ACQ96 ready
[Ingest 08:09:10 INFO] Starting acquisition
[Status 08:09:10 INFO] reading housekeeping
[Status 08:09:27 INFO] acquire complete
[Status 08:09:28 INFO] writing housekeeping
[Sequencer 08:09:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:09:28 INFO] incremented U scene to 151 completed views
[Sequencer 08:09:28 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:09:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:09:28 INFO] incremented to [AERI set: name V151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:09:28 INFO] U151.SIG(18)
[sigmove 08:09:28 DEBUG] transformed U151Ma.SPC -> U151MA.SPC
[sigmove 08:09:28 DEBUG] transformed U151Mb.SPC -> U151MB.SPC
[sigmove 08:09:28 DEBUG] transformed U151Mc.SPC -> U151MC.SPC
[sigmove 08:09:28 DEBUG] transformed U151Md.SPC -> U151MD.SPC
[sigmove 08:09:28 DEBUG] transformed U151Me.SPC -> U151ME.SPC
[sigmove 08:09:28 DEBUG] transformed U151Mf.SPC -> U151MF.SPC
[Status 08:09:28 INFO] data for U151 transferred to science data processing
[Tidy 08:09:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:09:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:09:28 INFO] resetting WatchDogTimer
[Status 08:09:28 INFO] Starting Set [AERI set: name V151, 6 scans, 0 angle, D16300 command]
[Ingest 08:09:28 INFO] Sending XML status message
[Status 08:09:28 INFO] Mirror angle: 0
[Mirror 08:09:28 INFO] rotating to position V
[Status 08:09:28 INFO] .SET file for ACQ96 ready
[Ingest 08:09:29 INFO] Starting acquisition
[Status 08:09:29 INFO] reading housekeeping
[Status 08:09:46 INFO] acquire complete
[Status 08:09:47 INFO] writing housekeeping
[Sequencer 08:09:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:09:47 INFO] incremented V scene to 151 completed views
[Sequencer 08:09:47 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:09:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:09:47 INFO] incremented to [AERI set: name W151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:09:47 INFO] V151.SIG(18)
[sigmove 08:09:47 DEBUG] transformed V151Ma.SPC -> V151MA.SPC
[sigmove 08:09:47 DEBUG] transformed V151Mb.SPC -> V151MB.SPC
[sigmove 08:09:47 DEBUG] transformed V151Mc.SPC -> V151MC.SPC
[sigmove 08:09:47 DEBUG] transformed V151Md.SPC -> V151MD.SPC
[sigmove 08:09:47 DEBUG] transformed V151Me.SPC -> V151ME.SPC
[sigmove 08:09:47 DEBUG] transformed V151Mf.SPC -> V151MF.SPC
[Status 08:09:47 INFO] data for V151 transferred to science data processing
[Tidy 08:09:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:09:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:09:47 INFO] resetting WatchDogTimer
[Status 08:09:47 INFO] Starting Set [AERI set: name W151, 6 scans, 0 angle, D16300 command]
[Ingest 08:09:47 INFO] Sending XML status message
[Status 08:09:47 INFO] Mirror angle: 0
[Mirror 08:09:47 INFO] rotating to position W
[Status 08:09:48 INFO] .SET file for ACQ96 ready
[Ingest 08:09:48 INFO] Starting acquisition
[Status 08:09:48 INFO] reading housekeeping
[Status 08:10:06 INFO] acquire complete
[Status 08:10:07 INFO] writing housekeeping
[Sequencer 08:10:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:10:07 INFO] incremented W scene to 151 completed views
[Sequencer 08:10:07 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:10:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:10:07 INFO] incremented to [AERI set: name X151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:10:07 INFO] W151.SIG(18)
[sigmove 08:10:07 DEBUG] transformed W151Ma.SPC -> W151MA.SPC
[sigmove 08:10:07 DEBUG] transformed W151Mb.SPC -> W151MB.SPC
[sigmove 08:10:07 DEBUG] transformed W151Mc.SPC -> W151MC.SPC
[sigmove 08:10:07 DEBUG] transformed W151Md.SPC -> W151MD.SPC
[sigmove 08:10:07 DEBUG] transformed W151Me.SPC -> W151ME.SPC
[sigmove 08:10:07 DEBUG] transformed W151Mf.SPC -> W151MF.SPC
[Status 08:10:07 INFO] data for W151 transferred to science data processing
[Tidy 08:10:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:10:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:10:07 INFO] resetting WatchDogTimer
[Status 08:10:07 INFO] Starting Set [AERI set: name X151, 6 scans, 0 angle, D16300 command]
[Ingest 08:10:07 INFO] Sending XML status message
[Status 08:10:07 INFO] Mirror angle: 0
[Mirror 08:10:07 INFO] rotating to position X
[Status 08:10:08 INFO] .SET file for ACQ96 ready
[Ingest 08:10:08 INFO] Starting acquisition
[Status 08:10:08 INFO] reading housekeeping
[Status 08:10:25 INFO] acquire complete
[Status 08:10:26 INFO] writing housekeeping
[Sequencer 08:10:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:10:26 INFO] incremented X scene to 151 completed views
[Sequencer 08:10:26 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:10:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:10:26 INFO] incremented to [AERI set: name Y151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:10:26 INFO] X151.SIG(18)
[sigmove 08:10:26 DEBUG] transformed X151Ma.SPC -> X151MA.SPC
[sigmove 08:10:26 DEBUG] transformed X151Mb.SPC -> X151MB.SPC
[sigmove 08:10:26 DEBUG] transformed X151Mc.SPC -> X151MC.SPC
[sigmove 08:10:26 DEBUG] transformed X151Md.SPC -> X151MD.SPC
[sigmove 08:10:26 DEBUG] transformed X151Me.SPC -> X151ME.SPC
[sigmove 08:10:26 DEBUG] transformed X151Mf.SPC -> X151MF.SPC
[Status 08:10:26 INFO] data for X151 transferred to science data processing
[Tidy 08:10:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:10:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:10:26 INFO] resetting WatchDogTimer
[Status 08:10:26 INFO] Starting Set [AERI set: name Y151, 6 scans, 0 angle, D16300 command]
[Ingest 08:10:26 INFO] Sending XML status message
[Status 08:10:26 INFO] Mirror angle: 0
[Mirror 08:10:26 INFO] rotating to position Y
[Status 08:10:27 INFO] .SET file for ACQ96 ready
[Ingest 08:10:27 INFO] Starting acquisition
[Status 08:10:27 INFO] reading housekeeping
[Status 08:10:45 INFO] acquire complete
[Status 08:10:45 INFO] writing housekeeping
[Sequencer 08:10:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:10:45 INFO] incremented Y scene to 151 completed views
[Sequencer 08:10:45 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:10:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:10:45 INFO] incremented to [AERI set: name Z151, 6 scans, 0 angle, D16300 command] set
[sigmove 08:10:45 INFO] Y151.SIG(18)
[sigmove 08:10:45 DEBUG] transformed Y151Ma.SPC -> Y151MA.SPC
[sigmove 08:10:45 DEBUG] transformed Y151Mb.SPC -> Y151MB.SPC
[sigmove 08:10:45 DEBUG] transformed Y151Mc.SPC -> Y151MC.SPC
[sigmove 08:10:45 DEBUG] transformed Y151Md.SPC -> Y151MD.SPC
[sigmove 08:10:45 DEBUG] transformed Y151Me.SPC -> Y151ME.SPC
[sigmove 08:10:45 DEBUG] transformed Y151Mf.SPC -> Y151MF.SPC
[Status 08:10:45 INFO] data for Y151 transferred to science data processing
[Tidy 08:10:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:10:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:10:45 INFO] resetting WatchDogTimer
[Status 08:10:45 INFO] Starting Set [AERI set: name Z151, 6 scans, 0 angle, D16300 command]
[Ingest 08:10:45 INFO] Sending XML status message
[Status 08:10:45 INFO] Mirror angle: 0
[Mirror 08:10:46 INFO] rotating to position Z
[Status 08:10:46 INFO] .SET file for ACQ96 ready
[Ingest 08:10:46 INFO] Starting acquisition
[Status 08:10:46 INFO] reading housekeeping
[Status 08:11:04 INFO] acquire complete
[Status 08:11:04 INFO] writing housekeeping
[Sequencer 08:11:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:11:04 INFO] incremented Z scene to 151 completed views
[Sequencer 08:11:04 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:11:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:11:04 INFO] incremented to [AERI set: name A152, 6 scans, 120 angle, D28300 command] set
[sigmove 08:11:04 INFO] Z151.SIG(18)
[sigmove 08:11:04 DEBUG] transformed Z151Ma.SPC -> Z151MA.SPC
[sigmove 08:11:04 DEBUG] transformed Z151Mb.SPC -> Z151MB.SPC
[sigmove 08:11:04 DEBUG] transformed Z151Mc.SPC -> Z151MC.SPC
[sigmove 08:11:04 DEBUG] transformed Z151Md.SPC -> Z151MD.SPC
[sigmove 08:11:04 DEBUG] transformed Z151Me.SPC -> Z151ME.SPC
[sigmove 08:11:04 DEBUG] transformed Z151Mf.SPC -> Z151MF.SPC
[Status 08:11:04 INFO] data for Z151 transferred to science data processing
[Tidy 08:11:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:11:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:11:04 INFO] resetting WatchDogTimer
[Status 08:11:04 INFO] Starting Set [AERI set: name A152, 6 scans, 120 angle, D28300 command]
[Ingest 08:11:04 INFO] Sending XML status message
[Status 08:11:04 INFO] Mirror angle: 120
[Mirror 08:11:05 INFO] rotating to position A
[Status 08:11:06 INFO] .SET file for ACQ96 ready
[Ingest 08:11:06 INFO] Starting acquisition
[Status 08:11:06 INFO] reading housekeeping
[Status 08:11:24 INFO] acquire complete
[Status 08:11:24 INFO] writing housekeeping
[Sequencer 08:11:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:11:24 INFO] incremented A scene to 152 completed views
[Sequencer 08:11:24 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:11:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:11:24 INFO] incremented to [AERI set: name H152, 6 scans, 60 angle, D22500 command] set
[sigmove 08:11:24 INFO] A152.SIG(18)
[sigmove 08:11:24 DEBUG] transformed A152Ma.SPC -> A152MA.SPC
[sigmove 08:11:24 DEBUG] transformed A152Mb.SPC -> A152MB.SPC
[sigmove 08:11:24 DEBUG] transformed A152Mc.SPC -> A152MC.SPC
[sigmove 08:11:24 DEBUG] transformed A152Md.SPC -> A152MD.SPC
[sigmove 08:11:24 DEBUG] transformed A152Me.SPC -> A152ME.SPC
[sigmove 08:11:24 DEBUG] transformed A152Mf.SPC -> A152MF.SPC
[Status 08:11:24 INFO] data for A152 transferred to science data processing
[Tidy 08:11:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:11:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:11:24 INFO] resetting WatchDogTimer
[Status 08:11:25 INFO] Starting Set [AERI set: name H152, 6 scans, 60 angle, D22500 command]
[Ingest 08:11:25 INFO] Sending XML status message
[Status 08:11:25 INFO] Mirror angle: 60
[Mirror 08:11:25 INFO] rotating to position H
[Status 08:11:26 INFO] .SET file for ACQ96 ready
[Ingest 08:11:26 INFO] Starting acquisition
[Status 08:11:26 INFO] reading housekeeping
[Status 08:11:44 INFO] acquire complete
[Status 08:11:45 INFO] writing housekeeping
[Sequencer 08:11:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:11:45 INFO] incremented H scene to 152 completed views
[Sequencer 08:11:45 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:11:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:11:45 INFO] incremented to [AERI set: name S152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:11:45 INFO] H152.SIG(18)
[sigmove 08:11:45 DEBUG] transformed H152Ma.SPC -> H152MA.SPC
[sigmove 08:11:45 DEBUG] transformed H152Mb.SPC -> H152MB.SPC
[sigmove 08:11:45 DEBUG] transformed H152Mc.SPC -> H152MC.SPC
[sigmove 08:11:45 DEBUG] transformed H152Md.SPC -> H152MD.SPC
[sigmove 08:11:45 DEBUG] transformed H152Me.SPC -> H152ME.SPC
[sigmove 08:11:45 DEBUG] transformed H152Mf.SPC -> H152MF.SPC
[Status 08:11:45 INFO] data for H152 transferred to science data processing
[Tidy 08:11:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:11:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:11:45 INFO] resetting WatchDogTimer
[Status 08:11:45 INFO] Starting Set [AERI set: name S152, 6 scans, 0 angle, D16300 command]
[Ingest 08:11:45 INFO] Sending XML status message
[Status 08:11:45 INFO] Mirror angle: 0
[Mirror 08:11:45 INFO] rotating to position S
[Status 08:11:46 INFO] .SET file for ACQ96 ready
[Ingest 08:11:46 INFO] Starting acquisition
[Status 08:11:46 INFO] reading housekeeping
[Status 08:12:04 INFO] acquire complete
[Status 08:12:05 INFO] writing housekeeping
[Sequencer 08:12:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:12:05 INFO] incremented S scene to 152 completed views
[Sequencer 08:12:05 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:12:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:12:05 INFO] incremented to [AERI set: name T152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:12:05 INFO] S152.SIG(18)
[sigmove 08:12:05 DEBUG] transformed S152Ma.SPC -> S152MA.SPC
[sigmove 08:12:05 DEBUG] transformed S152Mb.SPC -> S152MB.SPC
[sigmove 08:12:05 DEBUG] transformed S152Mc.SPC -> S152MC.SPC
[sigmove 08:12:05 DEBUG] transformed S152Md.SPC -> S152MD.SPC
[sigmove 08:12:05 DEBUG] transformed S152Me.SPC -> S152ME.SPC
[sigmove 08:12:05 DEBUG] transformed S152Mf.SPC -> S152MF.SPC
[Status 08:12:05 INFO] data for S152 transferred to science data processing
[Tidy 08:12:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:12:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:12:05 INFO] resetting WatchDogTimer
[Status 08:12:05 INFO] Starting Set [AERI set: name T152, 6 scans, 0 angle, D16300 command]
[Ingest 08:12:05 INFO] Sending XML status message
[Status 08:12:05 INFO] Mirror angle: 0
[Mirror 08:12:05 INFO] rotating to position T
[Status 08:12:06 INFO] .SET file for ACQ96 ready
[Ingest 08:12:06 INFO] Starting acquisition
[Status 08:12:06 INFO] reading housekeeping
[Status 08:12:23 INFO] acquire complete
[Status 08:12:24 INFO] writing housekeeping
[Sequencer 08:12:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:12:24 INFO] incremented T scene to 152 completed views
[Sequencer 08:12:24 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:12:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:12:24 INFO] incremented to [AERI set: name U152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:12:24 INFO] T152.SIG(18)
[sigmove 08:12:24 DEBUG] transformed T152Ma.SPC -> T152MA.SPC
[sigmove 08:12:24 DEBUG] transformed T152Mb.SPC -> T152MB.SPC
[sigmove 08:12:24 DEBUG] transformed T152Mc.SPC -> T152MC.SPC
[sigmove 08:12:24 DEBUG] transformed T152Md.SPC -> T152MD.SPC
[sigmove 08:12:24 DEBUG] transformed T152Me.SPC -> T152ME.SPC
[sigmove 08:12:24 DEBUG] transformed T152Mf.SPC -> T152MF.SPC
[Status 08:12:24 INFO] data for T152 transferred to science data processing
[Tidy 08:12:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:12:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:12:24 INFO] resetting WatchDogTimer
[Status 08:12:24 INFO] Starting Set [AERI set: name U152, 6 scans, 0 angle, D16300 command]
[Ingest 08:12:24 INFO] Sending XML status message
[Status 08:12:24 INFO] Mirror angle: 0
[Mirror 08:12:24 INFO] rotating to position U
[Status 08:12:25 INFO] .SET file for ACQ96 ready
[Ingest 08:12:25 INFO] Starting acquisition
[Status 08:12:25 INFO] reading housekeeping
[Status 08:12:42 INFO] acquire complete
[Status 08:12:43 INFO] writing housekeeping
[Sequencer 08:12:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:12:43 INFO] incremented U scene to 152 completed views
[Sequencer 08:12:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:12:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:12:43 INFO] incremented to [AERI set: name V152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:12:43 INFO] U152.SIG(18)
[sigmove 08:12:43 DEBUG] transformed U152Ma.SPC -> U152MA.SPC
[sigmove 08:12:43 DEBUG] transformed U152Mb.SPC -> U152MB.SPC
[sigmove 08:12:43 DEBUG] transformed U152Mc.SPC -> U152MC.SPC
[sigmove 08:12:43 DEBUG] transformed U152Md.SPC -> U152MD.SPC
[sigmove 08:12:43 DEBUG] transformed U152Me.SPC -> U152ME.SPC
[sigmove 08:12:43 DEBUG] transformed U152Mf.SPC -> U152MF.SPC
[Status 08:12:43 INFO] data for U152 transferred to science data processing
[Tidy 08:12:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:12:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:12:43 INFO] resetting WatchDogTimer
[Status 08:12:43 INFO] Starting Set [AERI set: name V152, 6 scans, 0 angle, D16300 command]
[Ingest 08:12:43 INFO] Sending XML status message
[Status 08:12:43 INFO] Mirror angle: 0
[Mirror 08:12:43 INFO] rotating to position V
[Status 08:12:44 INFO] .SET file for ACQ96 ready
[Ingest 08:12:44 INFO] Starting acquisition
[Status 08:12:44 INFO] reading housekeeping
[Status 08:13:01 INFO] acquire complete
[Status 08:13:02 INFO] writing housekeeping
[Sequencer 08:13:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:13:02 INFO] incremented V scene to 152 completed views
[Sequencer 08:13:02 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:13:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:13:02 INFO] incremented to [AERI set: name W152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:13:02 INFO] V152.SIG(18)
[sigmove 08:13:02 DEBUG] transformed V152Ma.SPC -> V152MA.SPC
[sigmove 08:13:02 DEBUG] transformed V152Mb.SPC -> V152MB.SPC
[sigmove 08:13:02 DEBUG] transformed V152Mc.SPC -> V152MC.SPC
[sigmove 08:13:02 DEBUG] transformed V152Md.SPC -> V152MD.SPC
[sigmove 08:13:02 DEBUG] transformed V152Me.SPC -> V152ME.SPC
[sigmove 08:13:02 DEBUG] transformed V152Mf.SPC -> V152MF.SPC
[Status 08:13:02 INFO] data for V152 transferred to science data processing
[Tidy 08:13:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:13:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:13:02 INFO] resetting WatchDogTimer
[Status 08:13:02 INFO] Starting Set [AERI set: name W152, 6 scans, 0 angle, D16300 command]
[Ingest 08:13:02 INFO] Sending XML status message
[Status 08:13:02 INFO] Mirror angle: 0
[Mirror 08:13:03 INFO] rotating to position W
[Status 08:13:03 INFO] .SET file for ACQ96 ready
[Ingest 08:13:03 INFO] Starting acquisition
[Status 08:13:03 INFO] reading housekeeping
[Status 08:13:21 INFO] acquire complete
[Status 08:13:21 INFO] writing housekeeping
[Sequencer 08:13:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:13:21 INFO] incremented W scene to 152 completed views
[Sequencer 08:13:21 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:13:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:13:21 INFO] incremented to [AERI set: name X152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:13:21 INFO] W152.SIG(18)
[sigmove 08:13:21 DEBUG] transformed W152Ma.SPC -> W152MA.SPC
[sigmove 08:13:21 DEBUG] transformed W152Mb.SPC -> W152MB.SPC
[sigmove 08:13:21 DEBUG] transformed W152Mc.SPC -> W152MC.SPC
[sigmove 08:13:21 DEBUG] transformed W152Md.SPC -> W152MD.SPC
[sigmove 08:13:21 DEBUG] transformed W152Me.SPC -> W152ME.SPC
[sigmove 08:13:21 DEBUG] transformed W152Mf.SPC -> W152MF.SPC
[Status 08:13:21 INFO] data for W152 transferred to science data processing
[Tidy 08:13:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:13:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:13:21 INFO] resetting WatchDogTimer
[Status 08:13:21 INFO] Starting Set [AERI set: name X152, 6 scans, 0 angle, D16300 command]
[Ingest 08:13:21 INFO] Sending XML status message
[Status 08:13:21 INFO] Mirror angle: 0
[Mirror 08:13:22 INFO] rotating to position X
[Status 08:13:22 INFO] .SET file for ACQ96 ready
[Ingest 08:13:22 INFO] Starting acquisition
[Status 08:13:22 INFO] reading housekeeping
[Status 08:13:40 INFO] acquire complete
[Status 08:13:40 INFO] writing housekeeping
[Sequencer 08:13:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:13:40 INFO] incremented X scene to 152 completed views
[Sequencer 08:13:40 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:13:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:13:40 INFO] incremented to [AERI set: name Y152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:13:40 INFO] X152.SIG(18)
[sigmove 08:13:40 DEBUG] transformed X152Ma.SPC -> X152MA.SPC
[sigmove 08:13:40 DEBUG] transformed X152Mb.SPC -> X152MB.SPC
[sigmove 08:13:40 DEBUG] transformed X152Mc.SPC -> X152MC.SPC
[sigmove 08:13:40 DEBUG] transformed X152Md.SPC -> X152MD.SPC
[sigmove 08:13:40 DEBUG] transformed X152Me.SPC -> X152ME.SPC
[sigmove 08:13:40 DEBUG] transformed X152Mf.SPC -> X152MF.SPC
[Status 08:13:40 INFO] data for X152 transferred to science data processing
[Tidy 08:13:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:13:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:13:40 INFO] resetting WatchDogTimer
[Status 08:13:40 INFO] Starting Set [AERI set: name Y152, 6 scans, 0 angle, D16300 command]
[Ingest 08:13:40 INFO] Sending XML status message
[Status 08:13:40 INFO] Mirror angle: 0
[Mirror 08:13:41 INFO] rotating to position Y
[Status 08:13:41 INFO] .SET file for ACQ96 ready
[Ingest 08:13:41 INFO] Starting acquisition
[Status 08:13:41 INFO] reading housekeeping
[Status 08:13:59 INFO] acquire complete
[Status 08:13:59 INFO] writing housekeeping
[Sequencer 08:13:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:13:59 INFO] incremented Y scene to 152 completed views
[Sequencer 08:13:59 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:13:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:13:59 INFO] incremented to [AERI set: name Z152, 6 scans, 0 angle, D16300 command] set
[sigmove 08:13:59 INFO] Y152.SIG(18)
[sigmove 08:13:59 DEBUG] transformed Y152Ma.SPC -> Y152MA.SPC
[sigmove 08:13:59 DEBUG] transformed Y152Mb.SPC -> Y152MB.SPC
[sigmove 08:13:59 DEBUG] transformed Y152Mc.SPC -> Y152MC.SPC
[sigmove 08:13:59 DEBUG] transformed Y152Md.SPC -> Y152MD.SPC
[sigmove 08:13:59 DEBUG] transformed Y152Me.SPC -> Y152ME.SPC
[sigmove 08:13:59 DEBUG] transformed Y152Mf.SPC -> Y152MF.SPC
[Status 08:13:59 INFO] data for Y152 transferred to science data processing
[Tidy 08:13:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:13:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:13:59 INFO] resetting WatchDogTimer
[Status 08:14:00 INFO] Starting Set [AERI set: name Z152, 6 scans, 0 angle, D16300 command]
[Ingest 08:14:00 INFO] Sending XML status message
[Status 08:14:00 INFO] Mirror angle: 0
[Mirror 08:14:00 INFO] rotating to position Z
[Status 08:14:00 INFO] .SET file for ACQ96 ready
[Ingest 08:14:00 INFO] Starting acquisition
[Status 08:14:00 INFO] reading housekeeping
[Status 08:14:18 INFO] acquire complete
[Status 08:14:18 INFO] writing housekeeping
[Sequencer 08:14:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:14:18 INFO] incremented Z scene to 152 completed views
[Sequencer 08:14:18 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:14:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:14:18 INFO] incremented to [AERI set: name H153, 6 scans, 60 angle, D22500 command] set
[sigmove 08:14:18 INFO] Z152.SIG(18)
[sigmove 08:14:18 DEBUG] transformed Z152Ma.SPC -> Z152MA.SPC
[sigmove 08:14:18 DEBUG] transformed Z152Mb.SPC -> Z152MB.SPC
[sigmove 08:14:18 DEBUG] transformed Z152Mc.SPC -> Z152MC.SPC
[sigmove 08:14:18 DEBUG] transformed Z152Md.SPC -> Z152MD.SPC
[sigmove 08:14:18 DEBUG] transformed Z152Me.SPC -> Z152ME.SPC
[sigmove 08:14:18 DEBUG] transformed Z152Mf.SPC -> Z152MF.SPC
[Status 08:14:18 INFO] data for Z152 transferred to science data processing
[Tidy 08:14:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:14:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:14:18 INFO] resetting WatchDogTimer
[Status 08:14:19 INFO] Starting Set [AERI set: name H153, 6 scans, 60 angle, D22500 command]
[Ingest 08:14:19 INFO] Sending XML status message
[Status 08:14:19 INFO] Mirror angle: 60
[Mirror 08:14:19 INFO] rotating to position H
[Status 08:14:20 INFO] .SET file for ACQ96 ready
[Ingest 08:14:20 INFO] Starting acquisition
[Status 08:14:20 INFO] reading housekeeping
[Status 08:14:38 INFO] acquire complete
[Status 08:14:39 INFO] writing housekeeping
[Sequencer 08:14:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:14:39 INFO] incremented H scene to 153 completed views
[Sequencer 08:14:39 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:14:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:14:39 INFO] incremented to [AERI set: name A153, 6 scans, 120 angle, D28300 command] set
[sigmove 08:14:39 INFO] H153.SIG(18)
[sigmove 08:14:39 DEBUG] transformed H153Ma.SPC -> H153MA.SPC
[sigmove 08:14:39 DEBUG] transformed H153Mb.SPC -> H153MB.SPC
[sigmove 08:14:39 DEBUG] transformed H153Mc.SPC -> H153MC.SPC
[sigmove 08:14:39 DEBUG] transformed H153Md.SPC -> H153MD.SPC
[sigmove 08:14:39 DEBUG] transformed H153Me.SPC -> H153ME.SPC
[sigmove 08:14:39 DEBUG] transformed H153Mf.SPC -> H153MF.SPC
[Status 08:14:39 INFO] data for H153 transferred to science data processing
[Tidy 08:14:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:14:39 INFO] A151.FIN(19),H151.FIN(19),S151.FIN(19),T151.FIN(19),U151.FIN(19),V151.FIN(19),W151.FIN(19),X151.FIN(19),Y151.FIN(19),Z151.FIN(19),A152.FIN(19),H152.FIN(19),S152.FIN(19),T152.FIN(19),U152.FIN(19),V152.FIN(19),W152.FIN(19),X152.FIN(19),Y152.FIN(19),Z152.FIN(19)
[sigmove 08:14:39 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:14:39 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:14:41 DEBUG] done zipping
[WatchDog 08:14:42 INFO] resetting WatchDogTimer
[Status 08:14:42 INFO] Starting Set [AERI set: name A153, 6 scans, 120 angle, D28300 command]
[Ingest 08:14:42 INFO] Sending XML status message
[Status 08:14:42 INFO] Mirror angle: 120
[Mirror 08:14:42 INFO] rotating to position A
[Status 08:14:43 INFO] .SET file for ACQ96 ready
[Ingest 08:14:43 INFO] Starting acquisition
[Status 08:14:43 INFO] reading housekeeping
[Status 08:15:02 INFO] acquire complete
[Status 08:15:02 INFO] writing housekeeping
[Sequencer 08:15:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:15:02 INFO] incremented A scene to 153 completed views
[Sequencer 08:15:02 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:15:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:15:02 INFO] incremented to [AERI set: name S153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:15:02 INFO] A153.SIG(18)
[sigmove 08:15:02 DEBUG] transformed A153Ma.SPC -> A153MA.SPC
[sigmove 08:15:02 DEBUG] transformed A153Mb.SPC -> A153MB.SPC
[sigmove 08:15:02 DEBUG] transformed A153Mc.SPC -> A153MC.SPC
[sigmove 08:15:02 DEBUG] transformed A153Md.SPC -> A153MD.SPC
[sigmove 08:15:02 DEBUG] transformed A153Me.SPC -> A153ME.SPC
[sigmove 08:15:02 DEBUG] transformed A153Mf.SPC -> A153MF.SPC
[Status 08:15:02 INFO] data for A153 transferred to science data processing
[Tidy 08:15:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:15:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:15:02 INFO] resetting WatchDogTimer
[Status 08:15:02 INFO] Starting Set [AERI set: name S153, 6 scans, 0 angle, D16300 command]
[Ingest 08:15:02 INFO] Sending XML status message
[Status 08:15:02 INFO] Mirror angle: 0
[Mirror 08:15:03 INFO] rotating to position S
[Status 08:15:04 INFO] .SET file for ACQ96 ready
[Ingest 08:15:04 INFO] Starting acquisition
[Status 08:15:04 INFO] reading housekeeping
[Status 08:15:22 INFO] acquire complete
[Status 08:15:22 INFO] writing housekeeping
[Sequencer 08:15:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:15:22 INFO] incremented S scene to 153 completed views
[Sequencer 08:15:22 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:15:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:15:22 INFO] incremented to [AERI set: name T153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:15:22 INFO] S153.SIG(18)
[sigmove 08:15:22 DEBUG] transformed S153Ma.SPC -> S153MA.SPC
[sigmove 08:15:22 DEBUG] transformed S153Mb.SPC -> S153MB.SPC
[sigmove 08:15:22 DEBUG] transformed S153Mc.SPC -> S153MC.SPC
[sigmove 08:15:22 DEBUG] transformed S153Md.SPC -> S153MD.SPC
[sigmove 08:15:22 DEBUG] transformed S153Me.SPC -> S153ME.SPC
[sigmove 08:15:22 DEBUG] transformed S153Mf.SPC -> S153MF.SPC
[Status 08:15:22 INFO] data for S153 transferred to science data processing
[Tidy 08:15:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:15:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:15:22 INFO] resetting WatchDogTimer
[Status 08:15:23 INFO] Starting Set [AERI set: name T153, 6 scans, 0 angle, D16300 command]
[Ingest 08:15:23 INFO] Sending XML status message
[Status 08:15:23 INFO] Mirror angle: 0
[Mirror 08:15:23 INFO] rotating to position T
[Status 08:15:23 INFO] .SET file for ACQ96 ready
[Ingest 08:15:23 INFO] Starting acquisition
[Status 08:15:24 INFO] reading housekeeping
[Status 08:15:41 INFO] acquire complete
[Status 08:15:41 INFO] writing housekeeping
[Sequencer 08:15:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:15:41 INFO] incremented T scene to 153 completed views
[Sequencer 08:15:41 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:15:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:15:41 INFO] incremented to [AERI set: name U153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:15:41 INFO] T153.SIG(18)
[sigmove 08:15:41 DEBUG] transformed T153Ma.SPC -> T153MA.SPC
[sigmove 08:15:41 DEBUG] transformed T153Mb.SPC -> T153MB.SPC
[sigmove 08:15:41 DEBUG] transformed T153Mc.SPC -> T153MC.SPC
[sigmove 08:15:41 DEBUG] transformed T153Md.SPC -> T153MD.SPC
[sigmove 08:15:41 DEBUG] transformed T153Me.SPC -> T153ME.SPC
[sigmove 08:15:41 DEBUG] transformed T153Mf.SPC -> T153MF.SPC
[Status 08:15:41 INFO] data for T153 transferred to science data processing
[Tidy 08:15:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:15:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:15:41 INFO] resetting WatchDogTimer
[Status 08:15:42 INFO] Starting Set [AERI set: name U153, 6 scans, 0 angle, D16300 command]
[Ingest 08:15:42 INFO] Sending XML status message
[Status 08:15:42 INFO] Mirror angle: 0
[Mirror 08:15:42 INFO] rotating to position U
[Status 08:15:42 INFO] .SET file for ACQ96 ready
[Ingest 08:15:42 INFO] Starting acquisition
[Status 08:15:43 INFO] reading housekeeping
[Status 08:16:00 INFO] acquire complete
[Status 08:16:01 INFO] writing housekeeping
[Sequencer 08:16:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:16:01 INFO] incremented U scene to 153 completed views
[Sequencer 08:16:01 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:16:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:16:01 INFO] incremented to [AERI set: name V153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:16:01 INFO] U153.SIG(18)
[sigmove 08:16:01 DEBUG] transformed U153Ma.SPC -> U153MA.SPC
[sigmove 08:16:01 DEBUG] transformed U153Mb.SPC -> U153MB.SPC
[sigmove 08:16:01 DEBUG] transformed U153Mc.SPC -> U153MC.SPC
[sigmove 08:16:01 DEBUG] transformed U153Md.SPC -> U153MD.SPC
[sigmove 08:16:01 DEBUG] transformed U153Me.SPC -> U153ME.SPC
[sigmove 08:16:01 DEBUG] transformed U153Mf.SPC -> U153MF.SPC
[Status 08:16:01 INFO] data for U153 transferred to science data processing
[Tidy 08:16:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:16:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:16:01 INFO] resetting WatchDogTimer
[Status 08:16:01 INFO] Starting Set [AERI set: name V153, 6 scans, 0 angle, D16300 command]
[Ingest 08:16:01 INFO] Sending XML status message
[Status 08:16:01 INFO] Mirror angle: 0
[Mirror 08:16:01 INFO] rotating to position V
[Status 08:16:01 INFO] .SET file for ACQ96 ready
[Ingest 08:16:01 INFO] Starting acquisition
[Status 08:16:02 INFO] reading housekeeping
[Status 08:16:19 INFO] acquire complete
[Status 08:16:20 INFO] writing housekeeping
[Sequencer 08:16:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:16:20 INFO] incremented V scene to 153 completed views
[Sequencer 08:16:20 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:16:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:16:20 INFO] incremented to [AERI set: name W153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:16:20 INFO] V153.SIG(18)
[sigmove 08:16:20 DEBUG] transformed V153Ma.SPC -> V153MA.SPC
[sigmove 08:16:20 DEBUG] transformed V153Mb.SPC -> V153MB.SPC
[sigmove 08:16:20 DEBUG] transformed V153Mc.SPC -> V153MC.SPC
[sigmove 08:16:20 DEBUG] transformed V153Md.SPC -> V153MD.SPC
[sigmove 08:16:20 DEBUG] transformed V153Me.SPC -> V153ME.SPC
[sigmove 08:16:20 DEBUG] transformed V153Mf.SPC -> V153MF.SPC
[Status 08:16:20 INFO] data for V153 transferred to science data processing
[Tidy 08:16:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:16:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:16:20 INFO] resetting WatchDogTimer
[Status 08:16:20 INFO] Starting Set [AERI set: name W153, 6 scans, 0 angle, D16300 command]
[Ingest 08:16:20 INFO] Sending XML status message
[Status 08:16:20 INFO] Mirror angle: 0
[Mirror 08:16:20 INFO] rotating to position W
[Status 08:16:20 INFO] .SET file for ACQ96 ready
[Ingest 08:16:21 INFO] Starting acquisition
[Status 08:16:21 INFO] reading housekeeping
[Status 08:16:38 INFO] acquire complete
[Status 08:16:39 INFO] writing housekeeping
[Sequencer 08:16:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:16:39 INFO] incremented W scene to 153 completed views
[Sequencer 08:16:39 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:16:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:16:39 INFO] incremented to [AERI set: name X153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:16:39 INFO] W153.SIG(18)
[sigmove 08:16:39 DEBUG] transformed W153Ma.SPC -> W153MA.SPC
[sigmove 08:16:39 DEBUG] transformed W153Mb.SPC -> W153MB.SPC
[sigmove 08:16:39 DEBUG] transformed W153Mc.SPC -> W153MC.SPC
[sigmove 08:16:39 DEBUG] transformed W153Md.SPC -> W153MD.SPC
[sigmove 08:16:39 DEBUG] transformed W153Me.SPC -> W153ME.SPC
[sigmove 08:16:39 DEBUG] transformed W153Mf.SPC -> W153MF.SPC
[Status 08:16:39 INFO] data for W153 transferred to science data processing
[Tidy 08:16:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:16:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:16:39 INFO] resetting WatchDogTimer
[Status 08:16:39 INFO] Starting Set [AERI set: name X153, 6 scans, 0 angle, D16300 command]
[Ingest 08:16:39 INFO] Sending XML status message
[Status 08:16:39 INFO] Mirror angle: 0
[Mirror 08:16:39 INFO] rotating to position X
[Status 08:16:39 INFO] .SET file for ACQ96 ready
[Ingest 08:16:40 INFO] Starting acquisition
[Status 08:16:40 INFO] reading housekeeping
[Status 08:16:57 INFO] acquire complete
[Status 08:16:58 INFO] writing housekeeping
[Sequencer 08:16:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:16:58 INFO] incremented X scene to 153 completed views
[Sequencer 08:16:58 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:16:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:16:58 INFO] incremented to [AERI set: name Y153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:16:58 INFO] X153.SIG(18)
[sigmove 08:16:58 DEBUG] transformed X153Ma.SPC -> X153MA.SPC
[sigmove 08:16:58 DEBUG] transformed X153Mb.SPC -> X153MB.SPC
[sigmove 08:16:58 DEBUG] transformed X153Mc.SPC -> X153MC.SPC
[sigmove 08:16:58 DEBUG] transformed X153Md.SPC -> X153MD.SPC
[sigmove 08:16:58 DEBUG] transformed X153Me.SPC -> X153ME.SPC
[sigmove 08:16:58 DEBUG] transformed X153Mf.SPC -> X153MF.SPC
[Status 08:16:58 INFO] data for X153 transferred to science data processing
[Tidy 08:16:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:16:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:16:58 INFO] resetting WatchDogTimer
[Status 08:16:58 INFO] Starting Set [AERI set: name Y153, 6 scans, 0 angle, D16300 command]
[Ingest 08:16:58 INFO] Sending XML status message
[Status 08:16:58 INFO] Mirror angle: 0
[Mirror 08:16:58 INFO] rotating to position Y
[Status 08:16:59 INFO] .SET file for ACQ96 ready
[Ingest 08:16:59 INFO] Starting acquisition
[Status 08:16:59 INFO] reading housekeeping
[Status 08:17:16 INFO] acquire complete
[Status 08:17:17 INFO] writing housekeeping
[Sequencer 08:17:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:17:17 INFO] incremented Y scene to 153 completed views
[Sequencer 08:17:17 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:17:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:17:17 INFO] incremented to [AERI set: name Z153, 6 scans, 0 angle, D16300 command] set
[sigmove 08:17:17 INFO] Y153.SIG(18)
[sigmove 08:17:17 DEBUG] transformed Y153Ma.SPC -> Y153MA.SPC
[sigmove 08:17:17 DEBUG] transformed Y153Mb.SPC -> Y153MB.SPC
[sigmove 08:17:17 DEBUG] transformed Y153Mc.SPC -> Y153MC.SPC
[sigmove 08:17:17 DEBUG] transformed Y153Md.SPC -> Y153MD.SPC
[sigmove 08:17:17 DEBUG] transformed Y153Me.SPC -> Y153ME.SPC
[sigmove 08:17:17 DEBUG] transformed Y153Mf.SPC -> Y153MF.SPC
[Status 08:17:17 INFO] data for Y153 transferred to science data processing
[Tidy 08:17:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:17:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:17:17 INFO] resetting WatchDogTimer
[Status 08:17:17 INFO] Starting Set [AERI set: name Z153, 6 scans, 0 angle, D16300 command]
[Ingest 08:17:17 INFO] Sending XML status message
[Status 08:17:17 INFO] Mirror angle: 0
[Mirror 08:17:17 INFO] rotating to position Z
[Status 08:17:18 INFO] .SET file for ACQ96 ready
[Ingest 08:17:18 INFO] Starting acquisition
[Status 08:17:18 INFO] reading housekeeping
[Status 08:17:35 INFO] acquire complete
[Status 08:17:36 INFO] writing housekeeping
[Sequencer 08:17:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:17:36 INFO] incremented Z scene to 153 completed views
[Sequencer 08:17:36 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:17:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:17:36 INFO] incremented to [AERI set: name A154, 6 scans, 120 angle, D28300 command] set
[sigmove 08:17:36 INFO] Z153.SIG(18)
[sigmove 08:17:36 DEBUG] transformed Z153Ma.SPC -> Z153MA.SPC
[sigmove 08:17:36 DEBUG] transformed Z153Mb.SPC -> Z153MB.SPC
[sigmove 08:17:36 DEBUG] transformed Z153Mc.SPC -> Z153MC.SPC
[sigmove 08:17:36 DEBUG] transformed Z153Md.SPC -> Z153MD.SPC
[sigmove 08:17:36 DEBUG] transformed Z153Me.SPC -> Z153ME.SPC
[sigmove 08:17:36 DEBUG] transformed Z153Mf.SPC -> Z153MF.SPC
[Status 08:17:36 INFO] data for Z153 transferred to science data processing
[Tidy 08:17:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:17:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:17:36 INFO] resetting WatchDogTimer
[Status 08:17:36 INFO] Starting Set [AERI set: name A154, 6 scans, 120 angle, D28300 command]
[Ingest 08:17:36 INFO] Sending XML status message
[Status 08:17:36 INFO] Mirror angle: 120
[Mirror 08:17:36 INFO] rotating to position A
[Status 08:17:38 INFO] .SET file for ACQ96 ready
[Ingest 08:17:38 INFO] Starting acquisition
[Status 08:17:38 INFO] reading housekeeping
[Status 08:17:55 INFO] acquire complete
[Status 08:17:56 INFO] writing housekeeping
[Sequencer 08:17:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:17:56 INFO] incremented A scene to 154 completed views
[Sequencer 08:17:56 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:17:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:17:56 INFO] incremented to [AERI set: name H154, 6 scans, 60 angle, D22500 command] set
[sigmove 08:17:56 INFO] A154.SIG(18)
[sigmove 08:17:56 DEBUG] transformed A154Ma.SPC -> A154MA.SPC
[sigmove 08:17:56 DEBUG] transformed A154Mb.SPC -> A154MB.SPC
[sigmove 08:17:56 DEBUG] transformed A154Mc.SPC -> A154MC.SPC
[sigmove 08:17:56 DEBUG] transformed A154Md.SPC -> A154MD.SPC
[sigmove 08:17:56 DEBUG] transformed A154Me.SPC -> A154ME.SPC
[sigmove 08:17:56 DEBUG] transformed A154Mf.SPC -> A154MF.SPC
[Status 08:17:56 INFO] data for A154 transferred to science data processing
[Tidy 08:17:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:17:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:17:56 INFO] resetting WatchDogTimer
[Status 08:17:56 INFO] Starting Set [AERI set: name H154, 6 scans, 60 angle, D22500 command]
[Ingest 08:17:56 INFO] Sending XML status message
[Status 08:17:56 INFO] Mirror angle: 60
[Mirror 08:17:57 INFO] rotating to position H
[Status 08:17:57 INFO] .SET file for ACQ96 ready
[Ingest 08:17:58 INFO] Starting acquisition
[Status 08:17:58 INFO] reading housekeeping
[Status 08:18:16 INFO] acquire complete
[Status 08:18:16 INFO] writing housekeeping
[Sequencer 08:18:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:18:16 INFO] incremented H scene to 154 completed views
[Sequencer 08:18:16 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:18:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:18:16 INFO] incremented to [AERI set: name S154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:18:16 INFO] H154.SIG(18)
[sigmove 08:18:16 DEBUG] transformed H154Ma.SPC -> H154MA.SPC
[sigmove 08:18:16 DEBUG] transformed H154Mb.SPC -> H154MB.SPC
[sigmove 08:18:16 DEBUG] transformed H154Mc.SPC -> H154MC.SPC
[sigmove 08:18:16 DEBUG] transformed H154Md.SPC -> H154MD.SPC
[sigmove 08:18:16 DEBUG] transformed H154Me.SPC -> H154ME.SPC
[sigmove 08:18:16 DEBUG] transformed H154Mf.SPC -> H154MF.SPC
[Status 08:18:16 INFO] data for H154 transferred to science data processing
[Tidy 08:18:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:18:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:18:16 INFO] resetting WatchDogTimer
[Status 08:18:17 INFO] Starting Set [AERI set: name S154, 6 scans, 0 angle, D16300 command]
[Ingest 08:18:17 INFO] Sending XML status message
[Status 08:18:17 INFO] Mirror angle: 0
[Mirror 08:18:17 INFO] rotating to position S
[Status 08:18:18 INFO] .SET file for ACQ96 ready
[Ingest 08:18:18 INFO] Starting acquisition
[Status 08:18:18 INFO] reading housekeeping
[Status 08:18:36 INFO] acquire complete
[Status 08:18:37 INFO] writing housekeeping
[Sequencer 08:18:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:18:37 INFO] incremented S scene to 154 completed views
[Sequencer 08:18:37 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:18:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:18:37 INFO] incremented to [AERI set: name T154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:18:37 INFO] S154.SIG(18)
[sigmove 08:18:37 DEBUG] transformed S154Ma.SPC -> S154MA.SPC
[sigmove 08:18:37 DEBUG] transformed S154Mb.SPC -> S154MB.SPC
[sigmove 08:18:37 DEBUG] transformed S154Mc.SPC -> S154MC.SPC
[sigmove 08:18:37 DEBUG] transformed S154Md.SPC -> S154MD.SPC
[sigmove 08:18:37 DEBUG] transformed S154Me.SPC -> S154ME.SPC
[sigmove 08:18:37 DEBUG] transformed S154Mf.SPC -> S154MF.SPC
[Status 08:18:37 INFO] data for S154 transferred to science data processing
[Tidy 08:18:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:18:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:18:37 INFO] resetting WatchDogTimer
[Status 08:18:37 INFO] Starting Set [AERI set: name T154, 6 scans, 0 angle, D16300 command]
[Ingest 08:18:37 INFO] Sending XML status message
[Status 08:18:37 INFO] Mirror angle: 0
[Mirror 08:18:37 INFO] rotating to position T
[Status 08:18:37 INFO] .SET file for ACQ96 ready
[Ingest 08:18:37 INFO] Starting acquisition
[Status 08:18:38 INFO] reading housekeeping
[Status 08:18:55 INFO] acquire complete
[Status 08:18:56 INFO] writing housekeeping
[Sequencer 08:18:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:18:56 INFO] incremented T scene to 154 completed views
[Sequencer 08:18:56 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:18:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:18:56 INFO] incremented to [AERI set: name U154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:18:56 INFO] T154.SIG(18)
[sigmove 08:18:56 DEBUG] transformed T154Ma.SPC -> T154MA.SPC
[sigmove 08:18:56 DEBUG] transformed T154Mb.SPC -> T154MB.SPC
[sigmove 08:18:56 DEBUG] transformed T154Mc.SPC -> T154MC.SPC
[sigmove 08:18:56 DEBUG] transformed T154Md.SPC -> T154MD.SPC
[sigmove 08:18:56 DEBUG] transformed T154Me.SPC -> T154ME.SPC
[sigmove 08:18:56 DEBUG] transformed T154Mf.SPC -> T154MF.SPC
[Status 08:18:56 INFO] data for T154 transferred to science data processing
[Tidy 08:18:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:18:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:18:56 INFO] resetting WatchDogTimer
[Status 08:18:56 INFO] Starting Set [AERI set: name U154, 6 scans, 0 angle, D16300 command]
[Ingest 08:18:56 INFO] Sending XML status message
[Status 08:18:56 INFO] Mirror angle: 0
[Mirror 08:18:56 INFO] rotating to position U
[Status 08:18:56 INFO] .SET file for ACQ96 ready
[Ingest 08:18:57 INFO] Starting acquisition
[Status 08:18:57 INFO] reading housekeeping
[Status 08:19:15 INFO] acquire complete
[Status 08:19:16 INFO] writing housekeeping
[Sequencer 08:19:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:19:16 INFO] incremented U scene to 154 completed views
[Sequencer 08:19:16 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:19:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:19:16 INFO] incremented to [AERI set: name V154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:19:16 INFO] U154.SIG(18)
[sigmove 08:19:16 DEBUG] transformed U154Ma.SPC -> U154MA.SPC
[sigmove 08:19:16 DEBUG] transformed U154Mb.SPC -> U154MB.SPC
[sigmove 08:19:16 DEBUG] transformed U154Mc.SPC -> U154MC.SPC
[sigmove 08:19:16 DEBUG] transformed U154Md.SPC -> U154MD.SPC
[sigmove 08:19:16 DEBUG] transformed U154Me.SPC -> U154ME.SPC
[sigmove 08:19:16 DEBUG] transformed U154Mf.SPC -> U154MF.SPC
[Status 08:19:16 INFO] data for U154 transferred to science data processing
[Tidy 08:19:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:19:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:19:16 INFO] resetting WatchDogTimer
[Status 08:19:16 INFO] Starting Set [AERI set: name V154, 6 scans, 0 angle, D16300 command]
[Ingest 08:19:16 INFO] Sending XML status message
[Status 08:19:16 INFO] Mirror angle: 0
[Mirror 08:19:16 INFO] rotating to position V
[Status 08:19:17 INFO] .SET file for ACQ96 ready
[Ingest 08:19:17 INFO] Starting acquisition
[Status 08:19:17 INFO] reading housekeeping
[Status 08:19:34 INFO] acquire complete
[Status 08:19:35 INFO] writing housekeeping
[Sequencer 08:19:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:19:35 INFO] incremented V scene to 154 completed views
[Sequencer 08:19:35 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:19:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:19:35 INFO] incremented to [AERI set: name W154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:19:35 INFO] V154.SIG(18)
[sigmove 08:19:35 DEBUG] transformed V154Ma.SPC -> V154MA.SPC
[sigmove 08:19:35 DEBUG] transformed V154Mb.SPC -> V154MB.SPC
[sigmove 08:19:35 DEBUG] transformed V154Mc.SPC -> V154MC.SPC
[sigmove 08:19:35 DEBUG] transformed V154Md.SPC -> V154MD.SPC
[sigmove 08:19:35 DEBUG] transformed V154Me.SPC -> V154ME.SPC
[sigmove 08:19:35 DEBUG] transformed V154Mf.SPC -> V154MF.SPC
[Status 08:19:35 INFO] data for V154 transferred to science data processing
[Tidy 08:19:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:19:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:19:35 INFO] resetting WatchDogTimer
[Status 08:19:35 INFO] Starting Set [AERI set: name W154, 6 scans, 0 angle, D16300 command]
[Ingest 08:19:35 INFO] Sending XML status message
[Status 08:19:35 INFO] Mirror angle: 0
[Mirror 08:19:35 INFO] rotating to position W
[Status 08:19:36 INFO] .SET file for ACQ96 ready
[Ingest 08:19:36 INFO] Starting acquisition
[Status 08:19:36 INFO] reading housekeeping
[Status 08:19:53 INFO] acquire complete
[Status 08:19:54 INFO] writing housekeeping
[Sequencer 08:19:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:19:54 INFO] incremented W scene to 154 completed views
[Sequencer 08:19:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:19:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:19:54 INFO] incremented to [AERI set: name X154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:19:54 INFO] W154.SIG(18)
[sigmove 08:19:54 DEBUG] transformed W154Ma.SPC -> W154MA.SPC
[sigmove 08:19:54 DEBUG] transformed W154Mb.SPC -> W154MB.SPC
[sigmove 08:19:54 DEBUG] transformed W154Mc.SPC -> W154MC.SPC
[sigmove 08:19:54 DEBUG] transformed W154Md.SPC -> W154MD.SPC
[sigmove 08:19:54 DEBUG] transformed W154Me.SPC -> W154ME.SPC
[sigmove 08:19:54 DEBUG] transformed W154Mf.SPC -> W154MF.SPC
[Status 08:19:54 INFO] data for W154 transferred to science data processing
[Tidy 08:19:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:19:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:19:54 INFO] resetting WatchDogTimer
[Status 08:19:54 INFO] Starting Set [AERI set: name X154, 6 scans, 0 angle, D16300 command]
[Ingest 08:19:54 INFO] Sending XML status message
[Status 08:19:54 INFO] Mirror angle: 0
[Mirror 08:19:54 INFO] rotating to position X
[Status 08:19:55 INFO] .SET file for ACQ96 ready
[Ingest 08:19:55 INFO] Starting acquisition
[Status 08:19:55 INFO] reading housekeeping
[Status 08:20:12 INFO] acquire complete
[Status 08:20:13 INFO] writing housekeeping
[Sequencer 08:20:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:20:13 INFO] incremented X scene to 154 completed views
[Sequencer 08:20:13 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:20:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:20:13 INFO] incremented to [AERI set: name Y154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:20:13 INFO] X154.SIG(18)
[sigmove 08:20:13 DEBUG] transformed X154Ma.SPC -> X154MA.SPC
[sigmove 08:20:13 DEBUG] transformed X154Mb.SPC -> X154MB.SPC
[sigmove 08:20:13 DEBUG] transformed X154Mc.SPC -> X154MC.SPC
[sigmove 08:20:13 DEBUG] transformed X154Md.SPC -> X154MD.SPC
[sigmove 08:20:13 DEBUG] transformed X154Me.SPC -> X154ME.SPC
[sigmove 08:20:13 DEBUG] transformed X154Mf.SPC -> X154MF.SPC
[Status 08:20:13 INFO] data for X154 transferred to science data processing
[Tidy 08:20:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:20:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:20:13 INFO] resetting WatchDogTimer
[Status 08:20:13 INFO] Starting Set [AERI set: name Y154, 6 scans, 0 angle, D16300 command]
[Ingest 08:20:13 INFO] Sending XML status message
[Status 08:20:13 INFO] Mirror angle: 0
[Mirror 08:20:13 INFO] rotating to position Y
[Status 08:20:14 INFO] .SET file for ACQ96 ready
[Ingest 08:20:14 INFO] Starting acquisition
[Status 08:20:14 INFO] reading housekeeping
[Status 08:20:31 INFO] acquire complete
[Status 08:20:32 INFO] writing housekeeping
[Sequencer 08:20:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:20:32 INFO] incremented Y scene to 154 completed views
[Sequencer 08:20:32 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:20:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:20:32 INFO] incremented to [AERI set: name Z154, 6 scans, 0 angle, D16300 command] set
[sigmove 08:20:32 INFO] Y154.SIG(18)
[sigmove 08:20:32 DEBUG] transformed Y154Ma.SPC -> Y154MA.SPC
[sigmove 08:20:32 DEBUG] transformed Y154Mb.SPC -> Y154MB.SPC
[sigmove 08:20:32 DEBUG] transformed Y154Mc.SPC -> Y154MC.SPC
[sigmove 08:20:32 DEBUG] transformed Y154Md.SPC -> Y154MD.SPC
[sigmove 08:20:32 DEBUG] transformed Y154Me.SPC -> Y154ME.SPC
[sigmove 08:20:32 DEBUG] transformed Y154Mf.SPC -> Y154MF.SPC
[Status 08:20:32 INFO] data for Y154 transferred to science data processing
[Tidy 08:20:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:20:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:20:32 INFO] resetting WatchDogTimer
[Status 08:20:32 INFO] Starting Set [AERI set: name Z154, 6 scans, 0 angle, D16300 command]
[Ingest 08:20:32 INFO] Sending XML status message
[Status 08:20:32 INFO] Mirror angle: 0
[Mirror 08:20:32 INFO] rotating to position Z
[Status 08:20:33 INFO] .SET file for ACQ96 ready
[Ingest 08:20:33 INFO] Starting acquisition
[Status 08:20:33 INFO] reading housekeeping
[Status 08:20:51 INFO] acquire complete
[Status 08:20:51 INFO] writing housekeeping
[Sequencer 08:20:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:20:51 INFO] incremented Z scene to 154 completed views
[Sequencer 08:20:51 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:20:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:20:51 INFO] incremented to [AERI set: name H155, 6 scans, 60 angle, D22500 command] set
[sigmove 08:20:51 INFO] Z154.SIG(18)
[sigmove 08:20:51 DEBUG] transformed Z154Ma.SPC -> Z154MA.SPC
[sigmove 08:20:51 DEBUG] transformed Z154Mb.SPC -> Z154MB.SPC
[sigmove 08:20:51 DEBUG] transformed Z154Mc.SPC -> Z154MC.SPC
[sigmove 08:20:51 DEBUG] transformed Z154Md.SPC -> Z154MD.SPC
[sigmove 08:20:51 DEBUG] transformed Z154Me.SPC -> Z154ME.SPC
[sigmove 08:20:51 DEBUG] transformed Z154Mf.SPC -> Z154MF.SPC
[Status 08:20:51 INFO] data for Z154 transferred to science data processing
[Tidy 08:20:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:20:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:20:51 INFO] resetting WatchDogTimer
[Status 08:20:51 INFO] Starting Set [AERI set: name H155, 6 scans, 60 angle, D22500 command]
[Ingest 08:20:51 INFO] Sending XML status message
[Status 08:20:51 INFO] Mirror angle: 60
[Mirror 08:20:52 INFO] rotating to position H
[Status 08:20:52 INFO] .SET file for ACQ96 ready
[Ingest 08:20:53 INFO] Starting acquisition
[Status 08:20:53 INFO] reading housekeeping
[Status 08:21:11 INFO] acquire complete
[Status 08:21:11 INFO] writing housekeeping
[Sequencer 08:21:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:21:11 INFO] incremented H scene to 155 completed views
[Sequencer 08:21:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:21:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:21:11 INFO] incremented to [AERI set: name A155, 6 scans, 120 angle, D28300 command] set
[sigmove 08:21:11 INFO] H155.SIG(18)
[sigmove 08:21:11 DEBUG] transformed H155Ma.SPC -> H155MA.SPC
[sigmove 08:21:11 DEBUG] transformed H155Mb.SPC -> H155MB.SPC
[sigmove 08:21:11 DEBUG] transformed H155Mc.SPC -> H155MC.SPC
[sigmove 08:21:11 DEBUG] transformed H155Md.SPC -> H155MD.SPC
[sigmove 08:21:11 DEBUG] transformed H155Me.SPC -> H155ME.SPC
[sigmove 08:21:11 DEBUG] transformed H155Mf.SPC -> H155MF.SPC
[Status 08:21:11 INFO] data for H155 transferred to science data processing
[Tidy 08:21:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:21:11 INFO] A153.FIN(19),H153.FIN(19),S153.FIN(19),T153.FIN(19),U153.FIN(19),V153.FIN(19),W153.FIN(19),X153.FIN(19),Y153.FIN(19),Z153.FIN(19),A154.FIN(19),H154.FIN(19),S154.FIN(19),T154.FIN(19),U154.FIN(19),V154.FIN(19),W154.FIN(19),X154.FIN(19),Y154.FIN(19),Z154.FIN(19)
[sigmove 08:21:11 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:21:11 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:21:14 DEBUG] done zipping
[WatchDog 08:21:14 INFO] resetting WatchDogTimer
[Status 08:21:15 INFO] Starting Set [AERI set: name A155, 6 scans, 120 angle, D28300 command]
[Ingest 08:21:15 INFO] Sending XML status message
[Status 08:21:15 INFO] Mirror angle: 120
[Mirror 08:21:15 INFO] rotating to position A
[Status 08:21:16 INFO] .SET file for ACQ96 ready
[Ingest 08:21:16 INFO] Starting acquisition
[Status 08:21:16 INFO] reading housekeeping
[Status 08:21:34 INFO] acquire complete
[Status 08:21:35 INFO] writing housekeeping
[Sequencer 08:21:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:21:35 INFO] incremented A scene to 155 completed views
[Sequencer 08:21:35 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:21:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:21:35 INFO] incremented to [AERI set: name S155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:21:35 INFO] A155.SIG(18)
[sigmove 08:21:35 DEBUG] transformed A155Ma.SPC -> A155MA.SPC
[sigmove 08:21:35 DEBUG] transformed A155Mb.SPC -> A155MB.SPC
[sigmove 08:21:35 DEBUG] transformed A155Mc.SPC -> A155MC.SPC
[sigmove 08:21:35 DEBUG] transformed A155Md.SPC -> A155MD.SPC
[sigmove 08:21:35 DEBUG] transformed A155Me.SPC -> A155ME.SPC
[sigmove 08:21:35 DEBUG] transformed A155Mf.SPC -> A155MF.SPC
[Status 08:21:35 INFO] data for A155 transferred to science data processing
[Tidy 08:21:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:21:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:21:35 INFO] resetting WatchDogTimer
[Status 08:21:35 INFO] Starting Set [AERI set: name S155, 6 scans, 0 angle, D16300 command]
[Ingest 08:21:35 INFO] Sending XML status message
[Status 08:21:35 INFO] Mirror angle: 0
[Mirror 08:21:35 INFO] rotating to position S
[Status 08:21:37 INFO] .SET file for ACQ96 ready
[Ingest 08:21:37 INFO] Starting acquisition
[Status 08:21:37 INFO] reading housekeeping
[Status 08:21:54 INFO] acquire complete
[Status 08:21:55 INFO] writing housekeeping
[Sequencer 08:21:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:21:55 INFO] incremented S scene to 155 completed views
[Sequencer 08:21:55 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:21:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:21:55 INFO] incremented to [AERI set: name T155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:21:55 INFO] S155.SIG(18)
[sigmove 08:21:55 DEBUG] transformed S155Ma.SPC -> S155MA.SPC
[sigmove 08:21:55 DEBUG] transformed S155Mb.SPC -> S155MB.SPC
[sigmove 08:21:55 DEBUG] transformed S155Mc.SPC -> S155MC.SPC
[sigmove 08:21:55 DEBUG] transformed S155Md.SPC -> S155MD.SPC
[sigmove 08:21:55 DEBUG] transformed S155Me.SPC -> S155ME.SPC
[sigmove 08:21:55 DEBUG] transformed S155Mf.SPC -> S155MF.SPC
[Status 08:21:55 INFO] data for S155 transferred to science data processing
[Tidy 08:21:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:21:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:21:55 INFO] resetting WatchDogTimer
[Status 08:21:55 INFO] Starting Set [AERI set: name T155, 6 scans, 0 angle, D16300 command]
[Ingest 08:21:55 INFO] Sending XML status message
[Status 08:21:55 INFO] Mirror angle: 0
[Mirror 08:21:56 INFO] rotating to position T
[Status 08:21:56 INFO] .SET file for ACQ96 ready
[Ingest 08:21:56 INFO] Starting acquisition
[Status 08:21:56 INFO] reading housekeeping
[Status 08:22:14 INFO] acquire complete
[Status 08:22:14 INFO] writing housekeeping
[Sequencer 08:22:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:22:14 INFO] incremented T scene to 155 completed views
[Sequencer 08:22:14 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:22:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:22:14 INFO] incremented to [AERI set: name U155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:22:14 INFO] T155.SIG(18)
[sigmove 08:22:14 DEBUG] transformed T155Ma.SPC -> T155MA.SPC
[sigmove 08:22:14 DEBUG] transformed T155Mb.SPC -> T155MB.SPC
[sigmove 08:22:14 DEBUG] transformed T155Mc.SPC -> T155MC.SPC
[sigmove 08:22:14 DEBUG] transformed T155Md.SPC -> T155MD.SPC
[sigmove 08:22:14 DEBUG] transformed T155Me.SPC -> T155ME.SPC
[sigmove 08:22:14 DEBUG] transformed T155Mf.SPC -> T155MF.SPC
[Status 08:22:14 INFO] data for T155 transferred to science data processing
[Tidy 08:22:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:22:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:22:14 INFO] resetting WatchDogTimer
[Status 08:22:14 INFO] Starting Set [AERI set: name U155, 6 scans, 0 angle, D16300 command]
[Ingest 08:22:14 INFO] Sending XML status message
[Status 08:22:14 INFO] Mirror angle: 0
[Mirror 08:22:15 INFO] rotating to position U
[Status 08:22:15 INFO] .SET file for ACQ96 ready
[Ingest 08:22:15 INFO] Starting acquisition
[Status 08:22:15 INFO] reading housekeeping
[Status 08:22:33 INFO] acquire complete
[Status 08:22:33 INFO] writing housekeeping
[Sequencer 08:22:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:22:33 INFO] incremented U scene to 155 completed views
[Sequencer 08:22:33 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:22:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:22:33 INFO] incremented to [AERI set: name V155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:22:33 INFO] U155.SIG(18)
[sigmove 08:22:33 DEBUG] transformed U155Ma.SPC -> U155MA.SPC
[sigmove 08:22:33 DEBUG] transformed U155Mb.SPC -> U155MB.SPC
[sigmove 08:22:33 DEBUG] transformed U155Mc.SPC -> U155MC.SPC
[sigmove 08:22:33 DEBUG] transformed U155Md.SPC -> U155MD.SPC
[sigmove 08:22:33 DEBUG] transformed U155Me.SPC -> U155ME.SPC
[sigmove 08:22:33 DEBUG] transformed U155Mf.SPC -> U155MF.SPC
[Status 08:22:33 INFO] data for U155 transferred to science data processing
[Tidy 08:22:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:22:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:22:33 INFO] resetting WatchDogTimer
[Status 08:22:33 INFO] Starting Set [AERI set: name V155, 6 scans, 0 angle, D16300 command]
[Ingest 08:22:33 INFO] Sending XML status message
[Status 08:22:33 INFO] Mirror angle: 0
[Mirror 08:22:34 INFO] rotating to position V
[Status 08:22:34 INFO] .SET file for ACQ96 ready
[Ingest 08:22:34 INFO] Starting acquisition
[Status 08:22:34 INFO] reading housekeeping
[Status 08:22:52 INFO] acquire complete
[Status 08:22:52 INFO] writing housekeeping
[Sequencer 08:22:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:22:52 INFO] incremented V scene to 155 completed views
[Sequencer 08:22:52 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:22:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:22:52 INFO] incremented to [AERI set: name W155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:22:52 INFO] V155.SIG(18)
[sigmove 08:22:52 DEBUG] transformed V155Ma.SPC -> V155MA.SPC
[sigmove 08:22:52 DEBUG] transformed V155Mb.SPC -> V155MB.SPC
[sigmove 08:22:52 DEBUG] transformed V155Mc.SPC -> V155MC.SPC
[sigmove 08:22:52 DEBUG] transformed V155Md.SPC -> V155MD.SPC
[sigmove 08:22:52 DEBUG] transformed V155Me.SPC -> V155ME.SPC
[sigmove 08:22:52 DEBUG] transformed V155Mf.SPC -> V155MF.SPC
[Status 08:22:52 INFO] data for V155 transferred to science data processing
[Tidy 08:22:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:22:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:22:52 INFO] resetting WatchDogTimer
[Status 08:22:53 INFO] Starting Set [AERI set: name W155, 6 scans, 0 angle, D16300 command]
[Ingest 08:22:53 INFO] Sending XML status message
[Status 08:22:53 INFO] Mirror angle: 0
[Mirror 08:22:53 INFO] rotating to position W
[Status 08:22:53 INFO] .SET file for ACQ96 ready
[Ingest 08:22:53 INFO] Starting acquisition
[Status 08:22:54 INFO] reading housekeeping
[Status 08:23:15 INFO] acquire complete
[Status 08:23:16 INFO] writing housekeeping
[Sequencer 08:23:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:23:16 INFO] incremented W scene to 155 completed views
[Sequencer 08:23:16 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:23:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:23:16 INFO] incremented to [AERI set: name X155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:23:16 INFO] W155.SIG(18)
[sigmove 08:23:16 DEBUG] transformed W155Ma.SPC -> W155MA.SPC
[sigmove 08:23:16 DEBUG] transformed W155Mb.SPC -> W155MB.SPC
[sigmove 08:23:16 DEBUG] transformed W155Mc.SPC -> W155MC.SPC
[sigmove 08:23:16 DEBUG] transformed W155Md.SPC -> W155MD.SPC
[sigmove 08:23:16 DEBUG] transformed W155Me.SPC -> W155ME.SPC
[sigmove 08:23:16 DEBUG] transformed W155Mf.SPC -> W155MF.SPC
[Status 08:23:16 INFO] data for W155 transferred to science data processing
[Tidy 08:23:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:23:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:23:16 INFO] resetting WatchDogTimer
[Status 08:23:16 INFO] Starting Set [AERI set: name X155, 6 scans, 0 angle, D16300 command]
[Ingest 08:23:16 INFO] Sending XML status message
[Status 08:23:16 INFO] Mirror angle: 0
[Mirror 08:23:16 INFO] rotating to position X
[Status 08:23:17 INFO] .SET file for ACQ96 ready
[Ingest 08:23:17 INFO] Starting acquisition
[Status 08:23:17 INFO] reading housekeeping
[Status 08:23:34 INFO] acquire complete
[Status 08:23:35 INFO] writing housekeeping
[Sequencer 08:23:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:23:35 INFO] incremented X scene to 155 completed views
[Sequencer 08:23:35 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:23:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:23:35 INFO] incremented to [AERI set: name Y155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:23:35 INFO] X155.SIG(18)
[sigmove 08:23:35 DEBUG] transformed X155Ma.SPC -> X155MA.SPC
[sigmove 08:23:35 DEBUG] transformed X155Mb.SPC -> X155MB.SPC
[sigmove 08:23:35 DEBUG] transformed X155Mc.SPC -> X155MC.SPC
[sigmove 08:23:35 DEBUG] transformed X155Md.SPC -> X155MD.SPC
[sigmove 08:23:35 DEBUG] transformed X155Me.SPC -> X155ME.SPC
[sigmove 08:23:35 DEBUG] transformed X155Mf.SPC -> X155MF.SPC
[Status 08:23:35 INFO] data for X155 transferred to science data processing
[Tidy 08:23:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:23:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:23:35 INFO] resetting WatchDogTimer
[Status 08:23:35 INFO] Starting Set [AERI set: name Y155, 6 scans, 0 angle, D16300 command]
[Ingest 08:23:35 INFO] Sending XML status message
[Status 08:23:35 INFO] Mirror angle: 0
[Mirror 08:23:35 INFO] rotating to position Y
[Status 08:23:36 INFO] .SET file for ACQ96 ready
[Ingest 08:23:36 INFO] Starting acquisition
[Status 08:23:36 INFO] reading housekeeping
[Status 08:23:53 INFO] acquire complete
[Status 08:23:54 INFO] writing housekeeping
[Sequencer 08:23:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:23:54 INFO] incremented Y scene to 155 completed views
[Sequencer 08:23:54 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:23:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:23:54 INFO] incremented to [AERI set: name Z155, 6 scans, 0 angle, D16300 command] set
[sigmove 08:23:54 INFO] Y155.SIG(18)
[sigmove 08:23:54 DEBUG] transformed Y155Ma.SPC -> Y155MA.SPC
[sigmove 08:23:54 DEBUG] transformed Y155Mb.SPC -> Y155MB.SPC
[sigmove 08:23:54 DEBUG] transformed Y155Mc.SPC -> Y155MC.SPC
[sigmove 08:23:54 DEBUG] transformed Y155Md.SPC -> Y155MD.SPC
[sigmove 08:23:54 DEBUG] transformed Y155Me.SPC -> Y155ME.SPC
[sigmove 08:23:54 DEBUG] transformed Y155Mf.SPC -> Y155MF.SPC
[Status 08:23:54 INFO] data for Y155 transferred to science data processing
[Tidy 08:23:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:23:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:23:54 INFO] resetting WatchDogTimer
[Status 08:23:54 INFO] Starting Set [AERI set: name Z155, 6 scans, 0 angle, D16300 command]
[Ingest 08:23:54 INFO] Sending XML status message
[Status 08:23:54 INFO] Mirror angle: 0
[Mirror 08:23:54 INFO] rotating to position Z
[Status 08:23:55 INFO] .SET file for ACQ96 ready
[Ingest 08:23:55 INFO] Starting acquisition
[Status 08:23:55 INFO] reading housekeeping
[Status 08:24:13 INFO] acquire complete
[Status 08:24:13 INFO] writing housekeeping
[Sequencer 08:24:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:24:13 INFO] incremented Z scene to 155 completed views
[Sequencer 08:24:13 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:24:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:24:13 INFO] incremented to [AERI set: name A156, 6 scans, 120 angle, D28300 command] set
[sigmove 08:24:13 INFO] Z155.SIG(18)
[sigmove 08:24:13 DEBUG] transformed Z155Ma.SPC -> Z155MA.SPC
[sigmove 08:24:13 DEBUG] transformed Z155Mb.SPC -> Z155MB.SPC
[sigmove 08:24:13 DEBUG] transformed Z155Mc.SPC -> Z155MC.SPC
[sigmove 08:24:13 DEBUG] transformed Z155Md.SPC -> Z155MD.SPC
[sigmove 08:24:13 DEBUG] transformed Z155Me.SPC -> Z155ME.SPC
[sigmove 08:24:13 DEBUG] transformed Z155Mf.SPC -> Z155MF.SPC
[Status 08:24:13 INFO] data for Z155 transferred to science data processing
[Tidy 08:24:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:24:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:24:13 INFO] resetting WatchDogTimer
[Status 08:24:13 INFO] Starting Set [AERI set: name A156, 6 scans, 120 angle, D28300 command]
[Ingest 08:24:13 INFO] Sending XML status message
[Status 08:24:13 INFO] Mirror angle: 120
[Mirror 08:24:14 INFO] rotating to position A
[Status 08:24:15 INFO] .SET file for ACQ96 ready
[Ingest 08:24:15 INFO] Starting acquisition
[Status 08:24:15 INFO] reading housekeeping
[Status 08:24:33 INFO] acquire complete
[Status 08:24:33 INFO] writing housekeeping
[Sequencer 08:24:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:24:33 INFO] incremented A scene to 156 completed views
[Sequencer 08:24:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:24:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:24:33 INFO] incremented to [AERI set: name H156, 6 scans, 60 angle, D22500 command] set
[sigmove 08:24:33 INFO] A156.SIG(18)
[sigmove 08:24:33 DEBUG] transformed A156Ma.SPC -> A156MA.SPC
[sigmove 08:24:33 DEBUG] transformed A156Mb.SPC -> A156MB.SPC
[sigmove 08:24:33 DEBUG] transformed A156Mc.SPC -> A156MC.SPC
[sigmove 08:24:33 DEBUG] transformed A156Md.SPC -> A156MD.SPC
[sigmove 08:24:33 DEBUG] transformed A156Me.SPC -> A156ME.SPC
[sigmove 08:24:33 DEBUG] transformed A156Mf.SPC -> A156MF.SPC
[Status 08:24:33 INFO] data for A156 transferred to science data processing
[Tidy 08:24:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:24:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:24:33 INFO] resetting WatchDogTimer
[Status 08:24:34 INFO] Starting Set [AERI set: name H156, 6 scans, 60 angle, D22500 command]
[Ingest 08:24:34 INFO] Sending XML status message
[Status 08:24:34 INFO] Mirror angle: 60
[Mirror 08:24:34 INFO] rotating to position H
[Status 08:24:35 INFO] .SET file for ACQ96 ready
[Ingest 08:24:35 INFO] Starting acquisition
[Status 08:24:35 INFO] reading housekeeping
[Status 08:24:53 INFO] acquire complete
[Status 08:24:54 INFO] writing housekeeping
[Sequencer 08:24:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:24:54 INFO] incremented H scene to 156 completed views
[Sequencer 08:24:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:24:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:24:54 INFO] incremented to [AERI set: name S156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:24:54 INFO] H156.SIG(18)
[sigmove 08:24:54 DEBUG] transformed H156Ma.SPC -> H156MA.SPC
[sigmove 08:24:54 DEBUG] transformed H156Mb.SPC -> H156MB.SPC
[sigmove 08:24:54 DEBUG] transformed H156Mc.SPC -> H156MC.SPC
[sigmove 08:24:54 DEBUG] transformed H156Md.SPC -> H156MD.SPC
[sigmove 08:24:54 DEBUG] transformed H156Me.SPC -> H156ME.SPC
[sigmove 08:24:54 DEBUG] transformed H156Mf.SPC -> H156MF.SPC
[Status 08:24:54 INFO] data for H156 transferred to science data processing
[Tidy 08:24:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:24:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:24:54 INFO] resetting WatchDogTimer
[Status 08:24:54 INFO] Starting Set [AERI set: name S156, 6 scans, 0 angle, D16300 command]
[Ingest 08:24:54 INFO] Sending XML status message
[Status 08:24:54 INFO] Mirror angle: 0
[Mirror 08:24:54 INFO] rotating to position S
[Status 08:24:55 INFO] .SET file for ACQ96 ready
[Ingest 08:24:55 INFO] Starting acquisition
[Status 08:24:55 INFO] reading housekeeping
[Status 08:25:13 INFO] acquire complete
[Status 08:25:14 INFO] writing housekeeping
[Sequencer 08:25:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:25:14 INFO] incremented S scene to 156 completed views
[Sequencer 08:25:14 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:25:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:25:14 INFO] incremented to [AERI set: name T156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:25:14 INFO] S156.SIG(18)
[sigmove 08:25:14 DEBUG] transformed S156Ma.SPC -> S156MA.SPC
[sigmove 08:25:14 DEBUG] transformed S156Mb.SPC -> S156MB.SPC
[sigmove 08:25:14 DEBUG] transformed S156Mc.SPC -> S156MC.SPC
[sigmove 08:25:14 DEBUG] transformed S156Md.SPC -> S156MD.SPC
[sigmove 08:25:14 DEBUG] transformed S156Me.SPC -> S156ME.SPC
[sigmove 08:25:14 DEBUG] transformed S156Mf.SPC -> S156MF.SPC
[Status 08:25:14 INFO] data for S156 transferred to science data processing
[Tidy 08:25:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:25:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:25:14 INFO] resetting WatchDogTimer
[Status 08:25:14 INFO] Starting Set [AERI set: name T156, 6 scans, 0 angle, D16300 command]
[Ingest 08:25:14 INFO] Sending XML status message
[Status 08:25:14 INFO] Mirror angle: 0
[Mirror 08:25:14 INFO] rotating to position T
[Status 08:25:15 INFO] .SET file for ACQ96 ready
[Ingest 08:25:15 INFO] Starting acquisition
[Status 08:25:15 INFO] reading housekeeping
[Status 08:25:33 INFO] acquire complete
[Status 08:25:34 INFO] writing housekeeping
[Sequencer 08:25:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:25:34 INFO] incremented T scene to 156 completed views
[Sequencer 08:25:34 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:25:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:25:34 INFO] incremented to [AERI set: name U156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:25:34 INFO] T156.SIG(18)
[sigmove 08:25:34 DEBUG] transformed T156Ma.SPC -> T156MA.SPC
[sigmove 08:25:34 DEBUG] transformed T156Mb.SPC -> T156MB.SPC
[sigmove 08:25:34 DEBUG] transformed T156Mc.SPC -> T156MC.SPC
[sigmove 08:25:34 DEBUG] transformed T156Md.SPC -> T156MD.SPC
[sigmove 08:25:34 DEBUG] transformed T156Me.SPC -> T156ME.SPC
[sigmove 08:25:34 DEBUG] transformed T156Mf.SPC -> T156MF.SPC
[Status 08:25:34 INFO] data for T156 transferred to science data processing
[Tidy 08:25:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:25:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:25:34 INFO] resetting WatchDogTimer
[Status 08:25:34 INFO] Starting Set [AERI set: name U156, 6 scans, 0 angle, D16300 command]
[Ingest 08:25:34 INFO] Sending XML status message
[Status 08:25:34 INFO] Mirror angle: 0
[Mirror 08:25:34 INFO] rotating to position U
[Status 08:25:35 INFO] .SET file for ACQ96 ready
[Ingest 08:25:35 INFO] Starting acquisition
[Status 08:25:35 INFO] reading housekeeping
[Status 08:25:52 INFO] acquire complete
[Status 08:25:53 INFO] writing housekeeping
[Sequencer 08:25:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:25:53 INFO] incremented U scene to 156 completed views
[Sequencer 08:25:53 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:25:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:25:53 INFO] incremented to [AERI set: name V156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:25:53 INFO] U156.SIG(18)
[sigmove 08:25:53 DEBUG] transformed U156Ma.SPC -> U156MA.SPC
[sigmove 08:25:53 DEBUG] transformed U156Mb.SPC -> U156MB.SPC
[sigmove 08:25:53 DEBUG] transformed U156Mc.SPC -> U156MC.SPC
[sigmove 08:25:53 DEBUG] transformed U156Md.SPC -> U156MD.SPC
[sigmove 08:25:53 DEBUG] transformed U156Me.SPC -> U156ME.SPC
[sigmove 08:25:53 DEBUG] transformed U156Mf.SPC -> U156MF.SPC
[Status 08:25:53 INFO] data for U156 transferred to science data processing
[Tidy 08:25:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:25:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:25:53 INFO] resetting WatchDogTimer
[Status 08:25:53 INFO] Starting Set [AERI set: name V156, 6 scans, 0 angle, D16300 command]
[Ingest 08:25:53 INFO] Sending XML status message
[Status 08:25:53 INFO] Mirror angle: 0
[Mirror 08:25:53 INFO] rotating to position V
[Status 08:25:54 INFO] .SET file for ACQ96 ready
[Ingest 08:25:54 INFO] Starting acquisition
[Status 08:25:54 INFO] reading housekeeping
[Status 08:26:11 INFO] acquire complete
[Status 08:26:12 INFO] writing housekeeping
[Sequencer 08:26:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:26:12 INFO] incremented V scene to 156 completed views
[Sequencer 08:26:12 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:26:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:26:12 INFO] incremented to [AERI set: name W156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:26:12 INFO] V156.SIG(18)
[sigmove 08:26:12 DEBUG] transformed V156Ma.SPC -> V156MA.SPC
[sigmove 08:26:12 DEBUG] transformed V156Mb.SPC -> V156MB.SPC
[sigmove 08:26:12 DEBUG] transformed V156Mc.SPC -> V156MC.SPC
[sigmove 08:26:12 DEBUG] transformed V156Md.SPC -> V156MD.SPC
[sigmove 08:26:12 DEBUG] transformed V156Me.SPC -> V156ME.SPC
[sigmove 08:26:12 DEBUG] transformed V156Mf.SPC -> V156MF.SPC
[Status 08:26:12 INFO] data for V156 transferred to science data processing
[Tidy 08:26:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:26:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:26:12 INFO] resetting WatchDogTimer
[Status 08:26:12 INFO] Starting Set [AERI set: name W156, 6 scans, 0 angle, D16300 command]
[Ingest 08:26:12 INFO] Sending XML status message
[Status 08:26:12 INFO] Mirror angle: 0
[Mirror 08:26:12 INFO] rotating to position W
[Status 08:26:13 INFO] .SET file for ACQ96 ready
[Ingest 08:26:13 INFO] Starting acquisition
[Status 08:26:13 INFO] reading housekeeping
[Status 08:26:31 INFO] acquire complete
[Status 08:26:31 INFO] writing housekeeping
[Sequencer 08:26:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:26:31 INFO] incremented W scene to 156 completed views
[Sequencer 08:26:31 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:26:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:26:31 INFO] incremented to [AERI set: name X156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:26:31 INFO] W156.SIG(18)
[sigmove 08:26:31 DEBUG] transformed W156Ma.SPC -> W156MA.SPC
[sigmove 08:26:31 DEBUG] transformed W156Mb.SPC -> W156MB.SPC
[sigmove 08:26:31 DEBUG] transformed W156Mc.SPC -> W156MC.SPC
[sigmove 08:26:31 DEBUG] transformed W156Md.SPC -> W156MD.SPC
[sigmove 08:26:31 DEBUG] transformed W156Me.SPC -> W156ME.SPC
[sigmove 08:26:31 DEBUG] transformed W156Mf.SPC -> W156MF.SPC
[Status 08:26:31 INFO] data for W156 transferred to science data processing
[Tidy 08:26:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:26:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:26:31 INFO] resetting WatchDogTimer
[Status 08:26:31 INFO] Starting Set [AERI set: name X156, 6 scans, 0 angle, D16300 command]
[Ingest 08:26:31 INFO] Sending XML status message
[Status 08:26:31 INFO] Mirror angle: 0
[Mirror 08:26:32 INFO] rotating to position X
[Status 08:26:32 INFO] .SET file for ACQ96 ready
[Ingest 08:26:32 INFO] Starting acquisition
[Status 08:26:32 INFO] reading housekeeping
[Status 08:26:51 INFO] acquire complete
[Status 08:26:51 INFO] writing housekeeping
[Sequencer 08:26:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:26:51 INFO] incremented X scene to 156 completed views
[Sequencer 08:26:51 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:26:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:26:51 INFO] incremented to [AERI set: name Y156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:26:51 INFO] X156.SIG(18)
[sigmove 08:26:51 DEBUG] transformed X156Ma.SPC -> X156MA.SPC
[sigmove 08:26:51 DEBUG] transformed X156Mb.SPC -> X156MB.SPC
[sigmove 08:26:51 DEBUG] transformed X156Mc.SPC -> X156MC.SPC
[sigmove 08:26:51 DEBUG] transformed X156Md.SPC -> X156MD.SPC
[sigmove 08:26:51 DEBUG] transformed X156Me.SPC -> X156ME.SPC
[sigmove 08:26:51 DEBUG] transformed X156Mf.SPC -> X156MF.SPC
[Status 08:26:51 INFO] data for X156 transferred to science data processing
[Tidy 08:26:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:26:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:26:51 INFO] resetting WatchDogTimer
[Status 08:26:52 INFO] Starting Set [AERI set: name Y156, 6 scans, 0 angle, D16300 command]
[Ingest 08:26:52 INFO] Sending XML status message
[Status 08:26:52 INFO] Mirror angle: 0
[Mirror 08:26:52 INFO] rotating to position Y
[Status 08:26:52 INFO] .SET file for ACQ96 ready
[Ingest 08:26:52 INFO] Starting acquisition
[Status 08:26:52 INFO] reading housekeeping
[Status 08:27:10 INFO] acquire complete
[Status 08:27:10 INFO] writing housekeeping
[Sequencer 08:27:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:27:10 INFO] incremented Y scene to 156 completed views
[Sequencer 08:27:10 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:27:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:27:10 INFO] incremented to [AERI set: name Z156, 6 scans, 0 angle, D16300 command] set
[sigmove 08:27:10 INFO] Y156.SIG(18)
[sigmove 08:27:10 DEBUG] transformed Y156Ma.SPC -> Y156MA.SPC
[sigmove 08:27:10 DEBUG] transformed Y156Mb.SPC -> Y156MB.SPC
[sigmove 08:27:10 DEBUG] transformed Y156Mc.SPC -> Y156MC.SPC
[sigmove 08:27:10 DEBUG] transformed Y156Md.SPC -> Y156MD.SPC
[sigmove 08:27:10 DEBUG] transformed Y156Me.SPC -> Y156ME.SPC
[sigmove 08:27:10 DEBUG] transformed Y156Mf.SPC -> Y156MF.SPC
[Status 08:27:10 INFO] data for Y156 transferred to science data processing
[Tidy 08:27:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:27:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:27:10 INFO] resetting WatchDogTimer
[Status 08:27:11 INFO] Starting Set [AERI set: name Z156, 6 scans, 0 angle, D16300 command]
[Ingest 08:27:11 INFO] Sending XML status message
[Status 08:27:11 INFO] Mirror angle: 0
[Mirror 08:27:11 INFO] rotating to position Z
[Status 08:27:11 INFO] .SET file for ACQ96 ready
[Ingest 08:27:11 INFO] Starting acquisition
[Status 08:27:12 INFO] reading housekeeping
[Status 08:27:29 INFO] acquire complete
[Status 08:27:29 INFO] writing housekeeping
[Sequencer 08:27:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:27:29 INFO] incremented Z scene to 156 completed views
[Sequencer 08:27:29 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:27:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:27:29 INFO] incremented to [AERI set: name H157, 6 scans, 60 angle, D22500 command] set
[sigmove 08:27:29 INFO] Z156.SIG(18)
[sigmove 08:27:29 DEBUG] transformed Z156Ma.SPC -> Z156MA.SPC
[sigmove 08:27:29 DEBUG] transformed Z156Mb.SPC -> Z156MB.SPC
[sigmove 08:27:29 DEBUG] transformed Z156Mc.SPC -> Z156MC.SPC
[sigmove 08:27:29 DEBUG] transformed Z156Md.SPC -> Z156MD.SPC
[sigmove 08:27:29 DEBUG] transformed Z156Me.SPC -> Z156ME.SPC
[sigmove 08:27:29 DEBUG] transformed Z156Mf.SPC -> Z156MF.SPC
[Status 08:27:29 INFO] data for Z156 transferred to science data processing
[Tidy 08:27:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:27:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:27:29 INFO] resetting WatchDogTimer
[Status 08:27:30 INFO] Starting Set [AERI set: name H157, 6 scans, 60 angle, D22500 command]
[Ingest 08:27:30 INFO] Sending XML status message
[Status 08:27:30 INFO] Mirror angle: 60
[Mirror 08:27:30 INFO] rotating to position H
[Status 08:27:31 INFO] .SET file for ACQ96 ready
[Ingest 08:27:31 INFO] Starting acquisition
[Status 08:27:31 INFO] reading housekeeping
[Status 08:27:49 INFO] acquire complete
[Status 08:27:50 INFO] writing housekeeping
[Sequencer 08:27:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:27:50 INFO] incremented H scene to 157 completed views
[Sequencer 08:27:50 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:27:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:27:50 INFO] incremented to [AERI set: name A157, 6 scans, 120 angle, D28300 command] set
[sigmove 08:27:50 INFO] H157.SIG(18)
[sigmove 08:27:50 DEBUG] transformed H157Ma.SPC -> H157MA.SPC
[sigmove 08:27:50 DEBUG] transformed H157Mb.SPC -> H157MB.SPC
[sigmove 08:27:50 DEBUG] transformed H157Mc.SPC -> H157MC.SPC
[sigmove 08:27:50 DEBUG] transformed H157Md.SPC -> H157MD.SPC
[sigmove 08:27:50 DEBUG] transformed H157Me.SPC -> H157ME.SPC
[sigmove 08:27:50 DEBUG] transformed H157Mf.SPC -> H157MF.SPC
[Status 08:27:50 INFO] data for H157 transferred to science data processing
[Tidy 08:27:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:27:50 INFO] A155.FIN(19),H155.FIN(19),S155.FIN(19),T155.FIN(19),U155.FIN(19),V155.FIN(19),W155.FIN(19),X155.FIN(19),Y155.FIN(19),Z155.FIN(19),A156.FIN(19),H156.FIN(19),S156.FIN(19),T156.FIN(19),U156.FIN(19),V156.FIN(19),W156.FIN(19),X156.FIN(19),Y156.FIN(19),Z156.FIN(19)
[sigmove 08:27:50 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:27:50 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:27:53 DEBUG] done zipping
[WatchDog 08:27:53 INFO] resetting WatchDogTimer
[Status 08:27:53 INFO] Starting Set [AERI set: name A157, 6 scans, 120 angle, D28300 command]
[Ingest 08:27:53 INFO] Sending XML status message
[Status 08:27:53 INFO] Mirror angle: 120
[Mirror 08:27:53 INFO] rotating to position A
[Status 08:27:54 INFO] .SET file for ACQ96 ready
[Ingest 08:27:54 INFO] Starting acquisition
[Status 08:27:54 INFO] reading housekeeping
[Status 08:28:13 INFO] acquire complete
[Status 08:28:13 INFO] writing housekeeping
[Sequencer 08:28:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:28:13 INFO] incremented A scene to 157 completed views
[Sequencer 08:28:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:28:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:28:13 INFO] incremented to [AERI set: name S157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:28:13 INFO] A157.SIG(18)
[sigmove 08:28:13 DEBUG] transformed A157Ma.SPC -> A157MA.SPC
[sigmove 08:28:13 DEBUG] transformed A157Mb.SPC -> A157MB.SPC
[sigmove 08:28:13 DEBUG] transformed A157Mc.SPC -> A157MC.SPC
[sigmove 08:28:13 DEBUG] transformed A157Md.SPC -> A157MD.SPC
[sigmove 08:28:13 DEBUG] transformed A157Me.SPC -> A157ME.SPC
[sigmove 08:28:13 DEBUG] transformed A157Mf.SPC -> A157MF.SPC
[Status 08:28:13 INFO] data for A157 transferred to science data processing
[Tidy 08:28:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:28:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:28:13 INFO] resetting WatchDogTimer
[Status 08:28:13 INFO] Starting Set [AERI set: name S157, 6 scans, 0 angle, D16300 command]
[Ingest 08:28:13 INFO] Sending XML status message
[Status 08:28:13 INFO] Mirror angle: 0
[Mirror 08:28:14 INFO] rotating to position S
[Status 08:28:15 INFO] .SET file for ACQ96 ready
[Ingest 08:28:15 INFO] Starting acquisition
[Status 08:28:15 INFO] reading housekeeping
[Status 08:28:33 INFO] acquire complete
[Status 08:28:33 INFO] writing housekeeping
[Sequencer 08:28:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:28:33 INFO] incremented S scene to 157 completed views
[Sequencer 08:28:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:28:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:28:33 INFO] incremented to [AERI set: name T157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:28:33 INFO] S157.SIG(18)
[sigmove 08:28:33 DEBUG] transformed S157Ma.SPC -> S157MA.SPC
[sigmove 08:28:33 DEBUG] transformed S157Mb.SPC -> S157MB.SPC
[sigmove 08:28:33 DEBUG] transformed S157Mc.SPC -> S157MC.SPC
[sigmove 08:28:33 DEBUG] transformed S157Md.SPC -> S157MD.SPC
[sigmove 08:28:33 DEBUG] transformed S157Me.SPC -> S157ME.SPC
[sigmove 08:28:33 DEBUG] transformed S157Mf.SPC -> S157MF.SPC
[Status 08:28:33 INFO] data for S157 transferred to science data processing
[Tidy 08:28:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:28:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:28:33 INFO] resetting WatchDogTimer
[Status 08:28:34 INFO] Starting Set [AERI set: name T157, 6 scans, 0 angle, D16300 command]
[Ingest 08:28:34 INFO] Sending XML status message
[Status 08:28:34 INFO] Mirror angle: 0
[Mirror 08:28:34 INFO] rotating to position T
[Status 08:28:34 INFO] .SET file for ACQ96 ready
[Ingest 08:28:34 INFO] Starting acquisition
[Status 08:28:35 INFO] reading housekeeping
[Status 08:28:53 INFO] acquire complete
[Status 08:28:54 INFO] writing housekeeping
[Sequencer 08:28:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:28:54 INFO] incremented T scene to 157 completed views
[Sequencer 08:28:54 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:28:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:28:54 INFO] incremented to [AERI set: name U157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:28:54 INFO] T157.SIG(18)
[sigmove 08:28:54 DEBUG] transformed T157Ma.SPC -> T157MA.SPC
[sigmove 08:28:54 DEBUG] transformed T157Mb.SPC -> T157MB.SPC
[sigmove 08:28:54 DEBUG] transformed T157Mc.SPC -> T157MC.SPC
[sigmove 08:28:54 DEBUG] transformed T157Md.SPC -> T157MD.SPC
[sigmove 08:28:54 DEBUG] transformed T157Me.SPC -> T157ME.SPC
[sigmove 08:28:54 DEBUG] transformed T157Mf.SPC -> T157MF.SPC
[Status 08:28:54 INFO] data for T157 transferred to science data processing
[Tidy 08:28:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:28:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:28:54 INFO] resetting WatchDogTimer
[Status 08:28:54 INFO] Starting Set [AERI set: name U157, 6 scans, 0 angle, D16300 command]
[Ingest 08:28:54 INFO] Sending XML status message
[Status 08:28:54 INFO] Mirror angle: 0
[Mirror 08:28:54 INFO] rotating to position U
[Status 08:28:55 INFO] .SET file for ACQ96 ready
[Ingest 08:28:55 INFO] Starting acquisition
[Status 08:28:55 INFO] reading housekeeping
[Status 08:29:13 INFO] acquire complete
[Status 08:29:14 INFO] writing housekeeping
[Sequencer 08:29:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:29:14 INFO] incremented U scene to 157 completed views
[Sequencer 08:29:14 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:29:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:29:14 INFO] incremented to [AERI set: name V157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:29:14 INFO] U157.SIG(18)
[sigmove 08:29:14 DEBUG] transformed U157Ma.SPC -> U157MA.SPC
[sigmove 08:29:14 DEBUG] transformed U157Mb.SPC -> U157MB.SPC
[sigmove 08:29:14 DEBUG] transformed U157Mc.SPC -> U157MC.SPC
[sigmove 08:29:14 DEBUG] transformed U157Md.SPC -> U157MD.SPC
[sigmove 08:29:14 DEBUG] transformed U157Me.SPC -> U157ME.SPC
[sigmove 08:29:14 DEBUG] transformed U157Mf.SPC -> U157MF.SPC
[Status 08:29:14 INFO] data for U157 transferred to science data processing
[Tidy 08:29:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:29:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:29:14 INFO] resetting WatchDogTimer
[Status 08:29:14 INFO] Starting Set [AERI set: name V157, 6 scans, 0 angle, D16300 command]
[Ingest 08:29:14 INFO] Sending XML status message
[Status 08:29:14 INFO] Mirror angle: 0
[Mirror 08:29:14 INFO] rotating to position V
[Status 08:29:15 INFO] .SET file for ACQ96 ready
[Ingest 08:29:15 INFO] Starting acquisition
[Status 08:29:15 INFO] reading housekeeping
[Status 08:29:32 INFO] acquire complete
[Status 08:29:33 INFO] writing housekeeping
[Sequencer 08:29:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:29:33 INFO] incremented V scene to 157 completed views
[Sequencer 08:29:33 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:29:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:29:33 INFO] incremented to [AERI set: name W157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:29:33 INFO] V157.SIG(18)
[sigmove 08:29:33 DEBUG] transformed V157Ma.SPC -> V157MA.SPC
[sigmove 08:29:33 DEBUG] transformed V157Mb.SPC -> V157MB.SPC
[sigmove 08:29:33 DEBUG] transformed V157Mc.SPC -> V157MC.SPC
[sigmove 08:29:33 DEBUG] transformed V157Md.SPC -> V157MD.SPC
[sigmove 08:29:33 DEBUG] transformed V157Me.SPC -> V157ME.SPC
[sigmove 08:29:33 DEBUG] transformed V157Mf.SPC -> V157MF.SPC
[Status 08:29:33 INFO] data for V157 transferred to science data processing
[Tidy 08:29:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:29:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:29:33 INFO] resetting WatchDogTimer
[Status 08:29:33 INFO] Starting Set [AERI set: name W157, 6 scans, 0 angle, D16300 command]
[Ingest 08:29:33 INFO] Sending XML status message
[Status 08:29:33 INFO] Mirror angle: 0
[Mirror 08:29:33 INFO] rotating to position W
[Status 08:29:34 INFO] .SET file for ACQ96 ready
[Ingest 08:29:34 INFO] Starting acquisition
[Status 08:29:34 INFO] reading housekeeping
[Status 08:29:51 INFO] acquire complete
[Status 08:29:52 INFO] writing housekeeping
[Sequencer 08:29:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:29:52 INFO] incremented W scene to 157 completed views
[Sequencer 08:29:52 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:29:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:29:52 INFO] incremented to [AERI set: name X157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:29:52 INFO] W157.SIG(18)
[sigmove 08:29:52 DEBUG] transformed W157Ma.SPC -> W157MA.SPC
[sigmove 08:29:52 DEBUG] transformed W157Mb.SPC -> W157MB.SPC
[sigmove 08:29:52 DEBUG] transformed W157Mc.SPC -> W157MC.SPC
[sigmove 08:29:52 DEBUG] transformed W157Md.SPC -> W157MD.SPC
[sigmove 08:29:52 DEBUG] transformed W157Me.SPC -> W157ME.SPC
[sigmove 08:29:52 DEBUG] transformed W157Mf.SPC -> W157MF.SPC
[Status 08:29:52 INFO] data for W157 transferred to science data processing
[Tidy 08:29:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:29:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:29:52 INFO] resetting WatchDogTimer
[Status 08:29:52 INFO] Starting Set [AERI set: name X157, 6 scans, 0 angle, D16300 command]
[Ingest 08:29:52 INFO] Sending XML status message
[Status 08:29:52 INFO] Mirror angle: 0
[Mirror 08:29:52 INFO] rotating to position X
[Status 08:29:53 INFO] .SET file for ACQ96 ready
[Ingest 08:29:53 INFO] Starting acquisition
[Status 08:29:53 INFO] reading housekeeping
[Status 08:30:10 INFO] acquire complete
[Status 08:30:11 INFO] writing housekeeping
[Sequencer 08:30:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:30:11 INFO] incremented X scene to 157 completed views
[Sequencer 08:30:11 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:30:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:30:11 INFO] incremented to [AERI set: name Y157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:30:11 INFO] X157.SIG(18)
[sigmove 08:30:11 DEBUG] transformed X157Ma.SPC -> X157MA.SPC
[sigmove 08:30:11 DEBUG] transformed X157Mb.SPC -> X157MB.SPC
[sigmove 08:30:11 DEBUG] transformed X157Mc.SPC -> X157MC.SPC
[sigmove 08:30:11 DEBUG] transformed X157Md.SPC -> X157MD.SPC
[sigmove 08:30:11 DEBUG] transformed X157Me.SPC -> X157ME.SPC
[sigmove 08:30:11 DEBUG] transformed X157Mf.SPC -> X157MF.SPC
[Status 08:30:11 INFO] data for X157 transferred to science data processing
[Tidy 08:30:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:30:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:30:11 INFO] resetting WatchDogTimer
[Status 08:30:11 INFO] Starting Set [AERI set: name Y157, 6 scans, 0 angle, D16300 command]
[Ingest 08:30:11 INFO] Sending XML status message
[Status 08:30:11 INFO] Mirror angle: 0
[Mirror 08:30:11 INFO] rotating to position Y
[Status 08:30:12 INFO] .SET file for ACQ96 ready
[Ingest 08:30:12 INFO] Starting acquisition
[Status 08:30:12 INFO] reading housekeeping
[Status 08:30:30 INFO] acquire complete
[Status 08:30:30 INFO] writing housekeeping
[Sequencer 08:30:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:30:30 INFO] incremented Y scene to 157 completed views
[Sequencer 08:30:30 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:30:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:30:30 INFO] incremented to [AERI set: name Z157, 6 scans, 0 angle, D16300 command] set
[sigmove 08:30:30 INFO] Y157.SIG(18)
[sigmove 08:30:30 DEBUG] transformed Y157Ma.SPC -> Y157MA.SPC
[sigmove 08:30:30 DEBUG] transformed Y157Mb.SPC -> Y157MB.SPC
[sigmove 08:30:30 DEBUG] transformed Y157Mc.SPC -> Y157MC.SPC
[sigmove 08:30:30 DEBUG] transformed Y157Md.SPC -> Y157MD.SPC
[sigmove 08:30:30 DEBUG] transformed Y157Me.SPC -> Y157ME.SPC
[sigmove 08:30:30 DEBUG] transformed Y157Mf.SPC -> Y157MF.SPC
[Status 08:30:30 INFO] data for Y157 transferred to science data processing
[Tidy 08:30:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:30:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:30:30 INFO] resetting WatchDogTimer
[Status 08:30:30 INFO] Starting Set [AERI set: name Z157, 6 scans, 0 angle, D16300 command]
[Ingest 08:30:30 INFO] Sending XML status message
[Status 08:30:30 INFO] Mirror angle: 0
[Mirror 08:30:31 INFO] rotating to position Z
[Status 08:30:31 INFO] .SET file for ACQ96 ready
[Ingest 08:30:31 INFO] Starting acquisition
[Status 08:30:31 INFO] reading housekeeping
[Status 08:30:49 INFO] acquire complete
[Status 08:30:49 INFO] writing housekeeping
[Sequencer 08:30:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:30:49 INFO] incremented Z scene to 157 completed views
[Sequencer 08:30:49 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:30:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:30:49 INFO] incremented to [AERI set: name A158, 6 scans, 120 angle, D28300 command] set
[sigmove 08:30:49 INFO] Z157.SIG(18)
[sigmove 08:30:49 DEBUG] transformed Z157Ma.SPC -> Z157MA.SPC
[sigmove 08:30:49 DEBUG] transformed Z157Mb.SPC -> Z157MB.SPC
[sigmove 08:30:49 DEBUG] transformed Z157Mc.SPC -> Z157MC.SPC
[sigmove 08:30:49 DEBUG] transformed Z157Md.SPC -> Z157MD.SPC
[sigmove 08:30:49 DEBUG] transformed Z157Me.SPC -> Z157ME.SPC
[sigmove 08:30:49 DEBUG] transformed Z157Mf.SPC -> Z157MF.SPC
[Status 08:30:49 INFO] data for Z157 transferred to science data processing
[Tidy 08:30:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:30:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:30:49 INFO] resetting WatchDogTimer
[Status 08:30:49 INFO] Starting Set [AERI set: name A158, 6 scans, 120 angle, D28300 command]
[Ingest 08:30:49 INFO] Sending XML status message
[Status 08:30:49 INFO] Mirror angle: 120
[Mirror 08:30:50 INFO] rotating to position A
[Status 08:30:51 INFO] .SET file for ACQ96 ready
[Ingest 08:30:51 INFO] Starting acquisition
[Status 08:30:51 INFO] reading housekeeping
[Status 08:31:09 INFO] acquire complete
[Status 08:31:09 INFO] writing housekeeping
[Sequencer 08:31:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:31:09 INFO] incremented A scene to 158 completed views
[Sequencer 08:31:09 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:31:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:31:09 INFO] incremented to [AERI set: name H158, 6 scans, 60 angle, D22500 command] set
[sigmove 08:31:09 INFO] A158.SIG(18)
[sigmove 08:31:09 DEBUG] transformed A158Ma.SPC -> A158MA.SPC
[sigmove 08:31:09 DEBUG] transformed A158Mb.SPC -> A158MB.SPC
[sigmove 08:31:09 DEBUG] transformed A158Mc.SPC -> A158MC.SPC
[sigmove 08:31:09 DEBUG] transformed A158Md.SPC -> A158MD.SPC
[sigmove 08:31:09 DEBUG] transformed A158Me.SPC -> A158ME.SPC
[sigmove 08:31:09 DEBUG] transformed A158Mf.SPC -> A158MF.SPC
[Status 08:31:09 INFO] data for A158 transferred to science data processing
[Tidy 08:31:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:31:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:31:09 INFO] resetting WatchDogTimer
[Status 08:31:10 INFO] Starting Set [AERI set: name H158, 6 scans, 60 angle, D22500 command]
[Ingest 08:31:10 INFO] Sending XML status message
[Status 08:31:10 INFO] Mirror angle: 60
[Mirror 08:31:10 INFO] rotating to position H
[Status 08:31:11 INFO] .SET file for ACQ96 ready
[Ingest 08:31:11 INFO] Starting acquisition
[Status 08:31:11 INFO] reading housekeeping
[Status 08:31:29 INFO] acquire complete
[Status 08:31:30 INFO] writing housekeeping
[Sequencer 08:31:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:31:30 INFO] incremented H scene to 158 completed views
[Sequencer 08:31:30 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:31:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:31:30 INFO] incremented to [AERI set: name S158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:31:30 INFO] H158.SIG(18)
[sigmove 08:31:30 DEBUG] transformed H158Ma.SPC -> H158MA.SPC
[sigmove 08:31:30 DEBUG] transformed H158Mb.SPC -> H158MB.SPC
[sigmove 08:31:30 DEBUG] transformed H158Mc.SPC -> H158MC.SPC
[sigmove 08:31:30 DEBUG] transformed H158Md.SPC -> H158MD.SPC
[sigmove 08:31:30 DEBUG] transformed H158Me.SPC -> H158ME.SPC
[sigmove 08:31:30 DEBUG] transformed H158Mf.SPC -> H158MF.SPC
[Status 08:31:30 INFO] data for H158 transferred to science data processing
[Tidy 08:31:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:31:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:31:30 INFO] resetting WatchDogTimer
[Status 08:31:30 INFO] Starting Set [AERI set: name S158, 6 scans, 0 angle, D16300 command]
[Ingest 08:31:30 INFO] Sending XML status message
[Status 08:31:30 INFO] Mirror angle: 0
[Mirror 08:31:30 INFO] rotating to position S
[Status 08:31:31 INFO] .SET file for ACQ96 ready
[Ingest 08:31:31 INFO] Starting acquisition
[Status 08:31:31 INFO] reading housekeeping
[Status 08:31:49 INFO] acquire complete
[Status 08:31:50 INFO] writing housekeeping
[Sequencer 08:31:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:31:50 INFO] incremented S scene to 158 completed views
[Sequencer 08:31:50 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:31:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:31:50 INFO] incremented to [AERI set: name T158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:31:50 INFO] S158.SIG(18)
[sigmove 08:31:50 DEBUG] transformed S158Ma.SPC -> S158MA.SPC
[sigmove 08:31:50 DEBUG] transformed S158Mb.SPC -> S158MB.SPC
[sigmove 08:31:50 DEBUG] transformed S158Mc.SPC -> S158MC.SPC
[sigmove 08:31:50 DEBUG] transformed S158Md.SPC -> S158MD.SPC
[sigmove 08:31:50 DEBUG] transformed S158Me.SPC -> S158ME.SPC
[sigmove 08:31:50 DEBUG] transformed S158Mf.SPC -> S158MF.SPC
[Status 08:31:50 INFO] data for S158 transferred to science data processing
[Tidy 08:31:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:31:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:31:50 INFO] resetting WatchDogTimer
[Status 08:31:50 INFO] Starting Set [AERI set: name T158, 6 scans, 0 angle, D16300 command]
[Ingest 08:31:50 INFO] Sending XML status message
[Status 08:31:50 INFO] Mirror angle: 0
[Mirror 08:31:50 INFO] rotating to position T
[Status 08:31:51 INFO] .SET file for ACQ96 ready
[Ingest 08:31:51 INFO] Starting acquisition
[Status 08:31:51 INFO] reading housekeeping
[Status 08:32:08 INFO] acquire complete
[Status 08:32:09 INFO] writing housekeeping
[Sequencer 08:32:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:32:09 INFO] incremented T scene to 158 completed views
[Sequencer 08:32:09 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:32:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:32:09 INFO] incremented to [AERI set: name U158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:32:09 INFO] T158.SIG(18)
[sigmove 08:32:09 DEBUG] transformed T158Ma.SPC -> T158MA.SPC
[sigmove 08:32:09 DEBUG] transformed T158Mb.SPC -> T158MB.SPC
[sigmove 08:32:09 DEBUG] transformed T158Mc.SPC -> T158MC.SPC
[sigmove 08:32:09 DEBUG] transformed T158Md.SPC -> T158MD.SPC
[sigmove 08:32:09 DEBUG] transformed T158Me.SPC -> T158ME.SPC
[sigmove 08:32:09 DEBUG] transformed T158Mf.SPC -> T158MF.SPC
[Status 08:32:09 INFO] data for T158 transferred to science data processing
[Tidy 08:32:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:32:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:32:09 INFO] resetting WatchDogTimer
[Status 08:32:09 INFO] Starting Set [AERI set: name U158, 6 scans, 0 angle, D16300 command]
[Ingest 08:32:09 INFO] Sending XML status message
[Status 08:32:09 INFO] Mirror angle: 0
[Mirror 08:32:09 INFO] rotating to position U
[Status 08:32:10 INFO] .SET file for ACQ96 ready
[Ingest 08:32:10 INFO] Starting acquisition
[Status 08:32:10 INFO] reading housekeeping
[Status 08:32:28 INFO] acquire complete
[Status 08:32:28 INFO] writing housekeeping
[Sequencer 08:32:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:32:28 INFO] incremented U scene to 158 completed views
[Sequencer 08:32:28 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:32:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:32:28 INFO] incremented to [AERI set: name V158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:32:28 INFO] U158.SIG(18)
[sigmove 08:32:28 DEBUG] transformed U158Ma.SPC -> U158MA.SPC
[sigmove 08:32:28 DEBUG] transformed U158Mb.SPC -> U158MB.SPC
[sigmove 08:32:28 DEBUG] transformed U158Mc.SPC -> U158MC.SPC
[sigmove 08:32:28 DEBUG] transformed U158Md.SPC -> U158MD.SPC
[sigmove 08:32:28 DEBUG] transformed U158Me.SPC -> U158ME.SPC
[sigmove 08:32:28 DEBUG] transformed U158Mf.SPC -> U158MF.SPC
[Status 08:32:28 INFO] data for U158 transferred to science data processing
[Tidy 08:32:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:32:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:32:28 INFO] resetting WatchDogTimer
[Status 08:32:28 INFO] Starting Set [AERI set: name V158, 6 scans, 0 angle, D16300 command]
[Ingest 08:32:28 INFO] Sending XML status message
[Status 08:32:28 INFO] Mirror angle: 0
[Mirror 08:32:29 INFO] rotating to position V
[Status 08:32:29 INFO] .SET file for ACQ96 ready
[Ingest 08:32:29 INFO] Starting acquisition
[Status 08:32:29 INFO] reading housekeeping
[Status 08:32:47 INFO] acquire complete
[Status 08:32:48 INFO] writing housekeeping
[Sequencer 08:32:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:32:48 INFO] incremented V scene to 158 completed views
[Sequencer 08:32:48 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:32:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:32:48 INFO] incremented to [AERI set: name W158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:32:48 INFO] V158.SIG(18)
[sigmove 08:32:48 DEBUG] transformed V158Ma.SPC -> V158MA.SPC
[sigmove 08:32:48 DEBUG] transformed V158Mb.SPC -> V158MB.SPC
[sigmove 08:32:48 DEBUG] transformed V158Mc.SPC -> V158MC.SPC
[sigmove 08:32:48 DEBUG] transformed V158Md.SPC -> V158MD.SPC
[sigmove 08:32:48 DEBUG] transformed V158Me.SPC -> V158ME.SPC
[sigmove 08:32:48 DEBUG] transformed V158Mf.SPC -> V158MF.SPC
[Status 08:32:48 INFO] data for V158 transferred to science data processing
[Tidy 08:32:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:32:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:32:48 INFO] resetting WatchDogTimer
[Status 08:32:48 INFO] Starting Set [AERI set: name W158, 6 scans, 0 angle, D16300 command]
[Ingest 08:32:48 INFO] Sending XML status message
[Status 08:32:48 INFO] Mirror angle: 0
[Mirror 08:32:49 INFO] rotating to position W
[Status 08:32:49 INFO] .SET file for ACQ96 ready
[Ingest 08:32:49 INFO] Starting acquisition
[Status 08:32:49 INFO] reading housekeeping
[Status 08:33:07 INFO] acquire complete
[Status 08:33:07 INFO] writing housekeeping
[Sequencer 08:33:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:33:07 INFO] incremented W scene to 158 completed views
[Sequencer 08:33:07 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:33:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:33:07 INFO] incremented to [AERI set: name X158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:33:07 INFO] W158.SIG(18)
[sigmove 08:33:07 DEBUG] transformed W158Ma.SPC -> W158MA.SPC
[sigmove 08:33:07 DEBUG] transformed W158Mb.SPC -> W158MB.SPC
[sigmove 08:33:07 DEBUG] transformed W158Mc.SPC -> W158MC.SPC
[sigmove 08:33:07 DEBUG] transformed W158Md.SPC -> W158MD.SPC
[sigmove 08:33:07 DEBUG] transformed W158Me.SPC -> W158ME.SPC
[sigmove 08:33:07 DEBUG] transformed W158Mf.SPC -> W158MF.SPC
[Status 08:33:07 INFO] data for W158 transferred to science data processing
[Tidy 08:33:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:33:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:33:07 INFO] resetting WatchDogTimer
[Status 08:33:07 INFO] Starting Set [AERI set: name X158, 6 scans, 0 angle, D16300 command]
[Ingest 08:33:07 INFO] Sending XML status message
[Status 08:33:07 INFO] Mirror angle: 0
[Mirror 08:33:08 INFO] rotating to position X
[Status 08:33:08 INFO] .SET file for ACQ96 ready
[Ingest 08:33:08 INFO] Starting acquisition
[Status 08:33:08 INFO] reading housekeeping
[Status 08:33:27 INFO] acquire complete
[Status 08:33:27 INFO] writing housekeeping
[Sequencer 08:33:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:33:27 INFO] incremented X scene to 158 completed views
[Sequencer 08:33:27 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:33:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:33:27 INFO] incremented to [AERI set: name Y158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:33:27 INFO] X158.SIG(18)
[sigmove 08:33:27 DEBUG] transformed X158Ma.SPC -> X158MA.SPC
[sigmove 08:33:27 DEBUG] transformed X158Mb.SPC -> X158MB.SPC
[sigmove 08:33:27 DEBUG] transformed X158Mc.SPC -> X158MC.SPC
[sigmove 08:33:27 DEBUG] transformed X158Md.SPC -> X158MD.SPC
[sigmove 08:33:27 DEBUG] transformed X158Me.SPC -> X158ME.SPC
[sigmove 08:33:27 DEBUG] transformed X158Mf.SPC -> X158MF.SPC
[Status 08:33:27 INFO] data for X158 transferred to science data processing
[Tidy 08:33:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:33:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:33:27 INFO] resetting WatchDogTimer
[Status 08:33:28 INFO] Starting Set [AERI set: name Y158, 6 scans, 0 angle, D16300 command]
[Ingest 08:33:28 INFO] Sending XML status message
[Status 08:33:28 INFO] Mirror angle: 0
[Mirror 08:33:28 INFO] rotating to position Y
[Status 08:33:28 INFO] .SET file for ACQ96 ready
[Ingest 08:33:28 INFO] Starting acquisition
[Status 08:33:29 INFO] reading housekeeping
[Status 08:33:46 INFO] acquire complete
[Status 08:33:46 INFO] writing housekeeping
[Sequencer 08:33:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:33:46 INFO] incremented Y scene to 158 completed views
[Sequencer 08:33:46 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:33:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:33:46 INFO] incremented to [AERI set: name Z158, 6 scans, 0 angle, D16300 command] set
[sigmove 08:33:46 INFO] Y158.SIG(18)
[sigmove 08:33:46 DEBUG] transformed Y158Ma.SPC -> Y158MA.SPC
[sigmove 08:33:46 DEBUG] transformed Y158Mb.SPC -> Y158MB.SPC
[sigmove 08:33:46 DEBUG] transformed Y158Mc.SPC -> Y158MC.SPC
[sigmove 08:33:46 DEBUG] transformed Y158Md.SPC -> Y158MD.SPC
[sigmove 08:33:46 DEBUG] transformed Y158Me.SPC -> Y158ME.SPC
[sigmove 08:33:46 DEBUG] transformed Y158Mf.SPC -> Y158MF.SPC
[Status 08:33:46 INFO] data for Y158 transferred to science data processing
[Tidy 08:33:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:33:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:33:46 INFO] resetting WatchDogTimer
[Status 08:33:47 INFO] Starting Set [AERI set: name Z158, 6 scans, 0 angle, D16300 command]
[Ingest 08:33:47 INFO] Sending XML status message
[Status 08:33:47 INFO] Mirror angle: 0
[Mirror 08:33:47 INFO] rotating to position Z
[Status 08:33:47 INFO] .SET file for ACQ96 ready
[Ingest 08:33:47 INFO] Starting acquisition
[Status 08:33:48 INFO] reading housekeeping
[Status 08:34:05 INFO] acquire complete
[Status 08:34:06 INFO] writing housekeeping
[Sequencer 08:34:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:34:06 INFO] incremented Z scene to 158 completed views
[Sequencer 08:34:06 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:34:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:34:06 INFO] incremented to [AERI set: name H159, 6 scans, 60 angle, D22500 command] set
[sigmove 08:34:06 INFO] Z158.SIG(18)
[sigmove 08:34:06 DEBUG] transformed Z158Ma.SPC -> Z158MA.SPC
[sigmove 08:34:06 DEBUG] transformed Z158Mb.SPC -> Z158MB.SPC
[sigmove 08:34:06 DEBUG] transformed Z158Mc.SPC -> Z158MC.SPC
[sigmove 08:34:06 DEBUG] transformed Z158Md.SPC -> Z158MD.SPC
[sigmove 08:34:06 DEBUG] transformed Z158Me.SPC -> Z158ME.SPC
[sigmove 08:34:06 DEBUG] transformed Z158Mf.SPC -> Z158MF.SPC
[Status 08:34:06 INFO] data for Z158 transferred to science data processing
[Tidy 08:34:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:34:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:34:06 INFO] resetting WatchDogTimer
[Status 08:34:06 INFO] Starting Set [AERI set: name H159, 6 scans, 60 angle, D22500 command]
[Ingest 08:34:06 INFO] Sending XML status message
[Status 08:34:06 INFO] Mirror angle: 60
[Mirror 08:34:06 INFO] rotating to position H
[Status 08:34:07 INFO] .SET file for ACQ96 ready
[Ingest 08:34:07 INFO] Starting acquisition
[Status 08:34:07 INFO] reading housekeeping
[Status 08:34:25 INFO] acquire complete
[Status 08:34:26 INFO] writing housekeeping
[Sequencer 08:34:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:34:26 INFO] incremented H scene to 159 completed views
[Sequencer 08:34:26 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:34:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:34:26 INFO] incremented to [AERI set: name A159, 6 scans, 120 angle, D28300 command] set
[sigmove 08:34:26 INFO] H159.SIG(18)
[sigmove 08:34:26 DEBUG] transformed H159Ma.SPC -> H159MA.SPC
[sigmove 08:34:26 DEBUG] transformed H159Mb.SPC -> H159MB.SPC
[sigmove 08:34:26 DEBUG] transformed H159Mc.SPC -> H159MC.SPC
[sigmove 08:34:26 DEBUG] transformed H159Md.SPC -> H159MD.SPC
[sigmove 08:34:26 DEBUG] transformed H159Me.SPC -> H159ME.SPC
[sigmove 08:34:26 DEBUG] transformed H159Mf.SPC -> H159MF.SPC
[Status 08:34:26 INFO] data for H159 transferred to science data processing
[Tidy 08:34:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:34:26 INFO] A157.FIN(19),H157.FIN(19),S157.FIN(19),T157.FIN(19),U157.FIN(19),V157.FIN(19),W157.FIN(19),X157.FIN(19),Y157.FIN(19),Z157.FIN(19),A158.FIN(19),H158.FIN(19),S158.FIN(19),T158.FIN(19),U158.FIN(19),V158.FIN(19),W158.FIN(19),X158.FIN(19),Y158.FIN(19),Z158.FIN(19)
[sigmove 08:34:26 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:34:26 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:34:29 DEBUG] done zipping
[WatchDog 08:34:29 INFO] resetting WatchDogTimer
[Status 08:34:29 INFO] Starting Set [AERI set: name A159, 6 scans, 120 angle, D28300 command]
[Ingest 08:34:29 INFO] Sending XML status message
[Status 08:34:29 INFO] Mirror angle: 120
[Mirror 08:34:29 INFO] rotating to position A
[Status 08:34:30 INFO] .SET file for ACQ96 ready
[Ingest 08:34:30 INFO] Starting acquisition
[Status 08:34:31 INFO] reading housekeeping
[Status 08:34:49 INFO] acquire complete
[Status 08:34:49 INFO] writing housekeeping
[Sequencer 08:34:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:34:49 INFO] incremented A scene to 159 completed views
[Sequencer 08:34:49 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:34:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:34:49 INFO] incremented to [AERI set: name S159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:34:49 INFO] A159.SIG(18)
[sigmove 08:34:49 DEBUG] transformed A159Ma.SPC -> A159MA.SPC
[sigmove 08:34:49 DEBUG] transformed A159Mb.SPC -> A159MB.SPC
[sigmove 08:34:49 DEBUG] transformed A159Mc.SPC -> A159MC.SPC
[sigmove 08:34:49 DEBUG] transformed A159Md.SPC -> A159MD.SPC
[sigmove 08:34:49 DEBUG] transformed A159Me.SPC -> A159ME.SPC
[sigmove 08:34:49 DEBUG] transformed A159Mf.SPC -> A159MF.SPC
[Status 08:34:49 INFO] data for A159 transferred to science data processing
[Tidy 08:34:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:34:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:34:49 INFO] resetting WatchDogTimer
[Status 08:34:49 INFO] Starting Set [AERI set: name S159, 6 scans, 0 angle, D16300 command]
[Ingest 08:34:50 INFO] Sending XML status message
[Status 08:34:50 INFO] Mirror angle: 0
[Mirror 08:34:50 INFO] rotating to position S
[Status 08:34:51 INFO] .SET file for ACQ96 ready
[Ingest 08:34:51 INFO] Starting acquisition
[Status 08:34:52 INFO] reading housekeeping
[Status 08:35:09 INFO] acquire complete
[Status 08:35:10 INFO] writing housekeeping
[Sequencer 08:35:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:35:10 INFO] incremented S scene to 159 completed views
[Sequencer 08:35:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:35:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:35:10 INFO] incremented to [AERI set: name T159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:35:10 INFO] S159.SIG(18)
[sigmove 08:35:10 DEBUG] transformed S159Ma.SPC -> S159MA.SPC
[sigmove 08:35:10 DEBUG] transformed S159Mb.SPC -> S159MB.SPC
[sigmove 08:35:10 DEBUG] transformed S159Mc.SPC -> S159MC.SPC
[sigmove 08:35:10 DEBUG] transformed S159Md.SPC -> S159MD.SPC
[sigmove 08:35:10 DEBUG] transformed S159Me.SPC -> S159ME.SPC
[sigmove 08:35:10 DEBUG] transformed S159Mf.SPC -> S159MF.SPC
[Status 08:35:10 INFO] data for S159 transferred to science data processing
[Tidy 08:35:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:35:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:35:10 INFO] resetting WatchDogTimer
[Status 08:35:10 INFO] Starting Set [AERI set: name T159, 6 scans, 0 angle, D16300 command]
[Ingest 08:35:10 INFO] Sending XML status message
[Status 08:35:10 INFO] Mirror angle: 0
[Mirror 08:35:10 INFO] rotating to position T
[Status 08:35:10 INFO] .SET file for ACQ96 ready
[Ingest 08:35:11 INFO] Starting acquisition
[Status 08:35:11 INFO] reading housekeeping
[Status 08:35:29 INFO] acquire complete
[Status 08:35:30 INFO] writing housekeeping
[Sequencer 08:35:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:35:30 INFO] incremented T scene to 159 completed views
[Sequencer 08:35:30 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:35:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:35:30 INFO] incremented to [AERI set: name U159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:35:30 INFO] T159.SIG(18)
[sigmove 08:35:30 DEBUG] transformed T159Ma.SPC -> T159MA.SPC
[sigmove 08:35:30 DEBUG] transformed T159Mb.SPC -> T159MB.SPC
[sigmove 08:35:30 DEBUG] transformed T159Mc.SPC -> T159MC.SPC
[sigmove 08:35:30 DEBUG] transformed T159Md.SPC -> T159MD.SPC
[sigmove 08:35:30 DEBUG] transformed T159Me.SPC -> T159ME.SPC
[sigmove 08:35:30 DEBUG] transformed T159Mf.SPC -> T159MF.SPC
[Status 08:35:30 INFO] data for T159 transferred to science data processing
[Tidy 08:35:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:35:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:35:30 INFO] resetting WatchDogTimer
[Status 08:35:30 INFO] Starting Set [AERI set: name U159, 6 scans, 0 angle, D16300 command]
[Ingest 08:35:30 INFO] Sending XML status message
[Status 08:35:30 INFO] Mirror angle: 0
[Mirror 08:35:30 INFO] rotating to position U
[Status 08:35:31 INFO] .SET file for ACQ96 ready
[Ingest 08:35:31 INFO] Starting acquisition
[Status 08:35:31 INFO] reading housekeeping
[Status 08:35:49 INFO] acquire complete
[Status 08:35:50 INFO] writing housekeeping
[Sequencer 08:35:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:35:50 INFO] incremented U scene to 159 completed views
[Sequencer 08:35:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:35:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:35:50 INFO] incremented to [AERI set: name V159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:35:50 INFO] U159.SIG(18)
[sigmove 08:35:50 DEBUG] transformed U159Ma.SPC -> U159MA.SPC
[sigmove 08:35:50 DEBUG] transformed U159Mb.SPC -> U159MB.SPC
[sigmove 08:35:50 DEBUG] transformed U159Mc.SPC -> U159MC.SPC
[sigmove 08:35:50 DEBUG] transformed U159Md.SPC -> U159MD.SPC
[sigmove 08:35:50 DEBUG] transformed U159Me.SPC -> U159ME.SPC
[sigmove 08:35:50 DEBUG] transformed U159Mf.SPC -> U159MF.SPC
[Status 08:35:50 INFO] data for U159 transferred to science data processing
[Tidy 08:35:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:35:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:35:50 INFO] resetting WatchDogTimer
[Status 08:35:50 INFO] Starting Set [AERI set: name V159, 6 scans, 0 angle, D16300 command]
[Ingest 08:35:50 INFO] Sending XML status message
[Status 08:35:50 INFO] Mirror angle: 0
[Mirror 08:35:50 INFO] rotating to position V
[Status 08:35:51 INFO] .SET file for ACQ96 ready
[Ingest 08:35:51 INFO] Starting acquisition
[Status 08:35:51 INFO] reading housekeeping
[Status 08:36:09 INFO] acquire complete
[Status 08:36:10 INFO] writing housekeeping
[Sequencer 08:36:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:36:10 INFO] incremented V scene to 159 completed views
[Sequencer 08:36:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:36:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:36:10 INFO] incremented to [AERI set: name W159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:36:10 INFO] V159.SIG(18)
[sigmove 08:36:10 DEBUG] transformed V159Ma.SPC -> V159MA.SPC
[sigmove 08:36:10 DEBUG] transformed V159Mb.SPC -> V159MB.SPC
[sigmove 08:36:10 DEBUG] transformed V159Mc.SPC -> V159MC.SPC
[sigmove 08:36:10 DEBUG] transformed V159Md.SPC -> V159MD.SPC
[sigmove 08:36:10 DEBUG] transformed V159Me.SPC -> V159ME.SPC
[sigmove 08:36:10 DEBUG] transformed V159Mf.SPC -> V159MF.SPC
[Status 08:36:10 INFO] data for V159 transferred to science data processing
[Tidy 08:36:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:36:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:36:10 INFO] resetting WatchDogTimer
[Status 08:36:10 INFO] Starting Set [AERI set: name W159, 6 scans, 0 angle, D16300 command]
[Ingest 08:36:10 INFO] Sending XML status message
[Status 08:36:10 INFO] Mirror angle: 0
[Mirror 08:36:11 INFO] rotating to position W
[Status 08:36:11 INFO] .SET file for ACQ96 ready
[Ingest 08:36:11 INFO] Starting acquisition
[Status 08:36:11 INFO] reading housekeeping
[Status 08:36:30 INFO] acquire complete
[Status 08:36:30 INFO] writing housekeeping
[Sequencer 08:36:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:36:30 INFO] incremented W scene to 159 completed views
[Sequencer 08:36:30 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:36:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:36:30 INFO] incremented to [AERI set: name X159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:36:30 INFO] W159.SIG(18)
[sigmove 08:36:30 DEBUG] transformed W159Ma.SPC -> W159MA.SPC
[sigmove 08:36:30 DEBUG] transformed W159Mb.SPC -> W159MB.SPC
[sigmove 08:36:30 DEBUG] transformed W159Mc.SPC -> W159MC.SPC
[sigmove 08:36:30 DEBUG] transformed W159Md.SPC -> W159MD.SPC
[sigmove 08:36:30 DEBUG] transformed W159Me.SPC -> W159ME.SPC
[sigmove 08:36:30 DEBUG] transformed W159Mf.SPC -> W159MF.SPC
[Status 08:36:30 INFO] data for W159 transferred to science data processing
[Tidy 08:36:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:36:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:36:30 INFO] resetting WatchDogTimer
[Status 08:36:30 INFO] Starting Set [AERI set: name X159, 6 scans, 0 angle, D16300 command]
[Ingest 08:36:30 INFO] Sending XML status message
[Status 08:36:30 INFO] Mirror angle: 0
[Mirror 08:36:31 INFO] rotating to position X
[Status 08:36:31 INFO] .SET file for ACQ96 ready
[Ingest 08:36:31 INFO] Starting acquisition
[Status 08:36:31 INFO] reading housekeeping
[Status 08:36:50 INFO] acquire complete
[Status 08:36:50 INFO] writing housekeeping
[Sequencer 08:36:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:36:50 INFO] incremented X scene to 159 completed views
[Sequencer 08:36:50 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:36:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:36:50 INFO] incremented to [AERI set: name Y159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:36:50 INFO] X159.SIG(18)
[sigmove 08:36:50 DEBUG] transformed X159Ma.SPC -> X159MA.SPC
[sigmove 08:36:50 DEBUG] transformed X159Mb.SPC -> X159MB.SPC
[sigmove 08:36:50 DEBUG] transformed X159Mc.SPC -> X159MC.SPC
[sigmove 08:36:50 DEBUG] transformed X159Md.SPC -> X159MD.SPC
[sigmove 08:36:50 DEBUG] transformed X159Me.SPC -> X159ME.SPC
[sigmove 08:36:50 DEBUG] transformed X159Mf.SPC -> X159MF.SPC
[Status 08:36:50 INFO] data for X159 transferred to science data processing
[Tidy 08:36:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:36:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:36:50 INFO] resetting WatchDogTimer
[Status 08:36:51 INFO] Starting Set [AERI set: name Y159, 6 scans, 0 angle, D16300 command]
[Ingest 08:36:51 INFO] Sending XML status message
[Status 08:36:51 INFO] Mirror angle: 0
[Mirror 08:36:51 INFO] rotating to position Y
[Status 08:36:51 INFO] .SET file for ACQ96 ready
[Ingest 08:36:51 INFO] Starting acquisition
[Status 08:36:52 INFO] reading housekeeping
[Status 08:37:10 INFO] acquire complete
[Status 08:37:11 INFO] writing housekeeping
[Sequencer 08:37:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:37:11 INFO] incremented Y scene to 159 completed views
[Sequencer 08:37:11 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:37:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:37:11 INFO] incremented to [AERI set: name Z159, 6 scans, 0 angle, D16300 command] set
[sigmove 08:37:11 INFO] Y159.SIG(18)
[sigmove 08:37:11 DEBUG] transformed Y159Ma.SPC -> Y159MA.SPC
[sigmove 08:37:11 DEBUG] transformed Y159Mb.SPC -> Y159MB.SPC
[sigmove 08:37:11 DEBUG] transformed Y159Mc.SPC -> Y159MC.SPC
[sigmove 08:37:11 DEBUG] transformed Y159Md.SPC -> Y159MD.SPC
[sigmove 08:37:11 DEBUG] transformed Y159Me.SPC -> Y159ME.SPC
[sigmove 08:37:11 DEBUG] transformed Y159Mf.SPC -> Y159MF.SPC
[Status 08:37:11 INFO] data for Y159 transferred to science data processing
[Tidy 08:37:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:37:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:37:11 INFO] resetting WatchDogTimer
[Status 08:37:11 INFO] Starting Set [AERI set: name Z159, 6 scans, 0 angle, D16300 command]
[Ingest 08:37:11 INFO] Sending XML status message
[Status 08:37:11 INFO] Mirror angle: 0
[Mirror 08:37:11 INFO] rotating to position Z
[Status 08:37:11 INFO] .SET file for ACQ96 ready
[Ingest 08:37:12 INFO] Starting acquisition
[Status 08:37:12 INFO] reading housekeeping
[Status 08:37:34 INFO] acquire complete
[Status 08:37:34 INFO] writing housekeeping
[Sequencer 08:37:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:37:34 INFO] incremented Z scene to 159 completed views
[Sequencer 08:37:34 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:37:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:37:34 INFO] incremented to [AERI set: name A160, 6 scans, 120 angle, D28300 command] set
[sigmove 08:37:34 INFO] Z159.SIG(18)
[sigmove 08:37:34 DEBUG] transformed Z159Ma.SPC -> Z159MA.SPC
[sigmove 08:37:34 DEBUG] transformed Z159Mb.SPC -> Z159MB.SPC
[sigmove 08:37:34 DEBUG] transformed Z159Mc.SPC -> Z159MC.SPC
[sigmove 08:37:34 DEBUG] transformed Z159Md.SPC -> Z159MD.SPC
[sigmove 08:37:34 DEBUG] transformed Z159Me.SPC -> Z159ME.SPC
[sigmove 08:37:34 DEBUG] transformed Z159Mf.SPC -> Z159MF.SPC
[Status 08:37:34 INFO] data for Z159 transferred to science data processing
[Tidy 08:37:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:37:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:37:34 INFO] resetting WatchDogTimer
[Status 08:37:34 INFO] Starting Set [AERI set: name A160, 6 scans, 120 angle, D28300 command]
[Ingest 08:37:34 INFO] Sending XML status message
[Status 08:37:34 INFO] Mirror angle: 120
[Mirror 08:37:35 INFO] rotating to position A
[Status 08:37:36 INFO] .SET file for ACQ96 ready
[Ingest 08:37:36 INFO] Starting acquisition
[Status 08:37:36 INFO] reading housekeeping
[Status 08:37:54 INFO] acquire complete
[Status 08:37:54 INFO] writing housekeeping
[Sequencer 08:37:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:37:54 INFO] incremented A scene to 160 completed views
[Sequencer 08:37:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:37:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:37:54 INFO] incremented to [AERI set: name H160, 6 scans, 60 angle, D22500 command] set
[sigmove 08:37:54 INFO] A160.SIG(18)
[sigmove 08:37:54 DEBUG] transformed A160Ma.SPC -> A160MA.SPC
[sigmove 08:37:54 DEBUG] transformed A160Mb.SPC -> A160MB.SPC
[sigmove 08:37:54 DEBUG] transformed A160Mc.SPC -> A160MC.SPC
[sigmove 08:37:54 DEBUG] transformed A160Md.SPC -> A160MD.SPC
[sigmove 08:37:54 DEBUG] transformed A160Me.SPC -> A160ME.SPC
[sigmove 08:37:54 DEBUG] transformed A160Mf.SPC -> A160MF.SPC
[Status 08:37:54 INFO] data for A160 transferred to science data processing
[Tidy 08:37:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:37:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:37:54 INFO] resetting WatchDogTimer
[Status 08:37:55 INFO] Starting Set [AERI set: name H160, 6 scans, 60 angle, D22500 command]
[Ingest 08:37:55 INFO] Sending XML status message
[Status 08:37:55 INFO] Mirror angle: 60
[Mirror 08:37:55 INFO] rotating to position H
[Status 08:37:56 INFO] .SET file for ACQ96 ready
[Ingest 08:37:56 INFO] Starting acquisition
[Status 08:37:56 INFO] reading housekeeping
[Status 08:38:14 INFO] acquire complete
[Status 08:38:15 INFO] writing housekeeping
[Sequencer 08:38:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:38:15 INFO] incremented H scene to 160 completed views
[Sequencer 08:38:15 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:38:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:38:15 INFO] incremented to [AERI set: name S160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:38:15 INFO] H160.SIG(18)
[sigmove 08:38:15 DEBUG] transformed H160Ma.SPC -> H160MA.SPC
[sigmove 08:38:15 DEBUG] transformed H160Mb.SPC -> H160MB.SPC
[sigmove 08:38:15 DEBUG] transformed H160Mc.SPC -> H160MC.SPC
[sigmove 08:38:15 DEBUG] transformed H160Md.SPC -> H160MD.SPC
[sigmove 08:38:15 DEBUG] transformed H160Me.SPC -> H160ME.SPC
[sigmove 08:38:15 DEBUG] transformed H160Mf.SPC -> H160MF.SPC
[Status 08:38:15 INFO] data for H160 transferred to science data processing
[Tidy 08:38:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:38:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:38:15 INFO] resetting WatchDogTimer
[Status 08:38:15 INFO] Starting Set [AERI set: name S160, 6 scans, 0 angle, D16300 command]
[Ingest 08:38:15 INFO] Sending XML status message
[Status 08:38:15 INFO] Mirror angle: 0
[Mirror 08:38:15 INFO] rotating to position S
[Status 08:38:16 INFO] .SET file for ACQ96 ready
[Ingest 08:38:16 INFO] Starting acquisition
[Status 08:38:16 INFO] reading housekeeping
[Status 08:38:34 INFO] acquire complete
[Status 08:38:35 INFO] writing housekeeping
[Sequencer 08:38:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:38:35 INFO] incremented S scene to 160 completed views
[Sequencer 08:38:35 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:38:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:38:35 INFO] incremented to [AERI set: name T160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:38:35 INFO] S160.SIG(18)
[sigmove 08:38:35 DEBUG] transformed S160Ma.SPC -> S160MA.SPC
[sigmove 08:38:35 DEBUG] transformed S160Mb.SPC -> S160MB.SPC
[sigmove 08:38:35 DEBUG] transformed S160Mc.SPC -> S160MC.SPC
[sigmove 08:38:35 DEBUG] transformed S160Md.SPC -> S160MD.SPC
[sigmove 08:38:35 DEBUG] transformed S160Me.SPC -> S160ME.SPC
[sigmove 08:38:35 DEBUG] transformed S160Mf.SPC -> S160MF.SPC
[Status 08:38:35 INFO] data for S160 transferred to science data processing
[Tidy 08:38:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:38:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:38:35 INFO] resetting WatchDogTimer
[Status 08:38:35 INFO] Starting Set [AERI set: name T160, 6 scans, 0 angle, D16300 command]
[Ingest 08:38:35 INFO] Sending XML status message
[Status 08:38:35 INFO] Mirror angle: 0
[Mirror 08:38:35 INFO] rotating to position T
[Status 08:38:36 INFO] .SET file for ACQ96 ready
[Ingest 08:38:36 INFO] Starting acquisition
[Status 08:38:36 INFO] reading housekeeping
[Status 08:38:54 INFO] acquire complete
[Status 08:38:55 INFO] writing housekeeping
[Sequencer 08:38:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:38:55 INFO] incremented T scene to 160 completed views
[Sequencer 08:38:55 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:38:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:38:55 INFO] incremented to [AERI set: name U160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:38:55 INFO] T160.SIG(18)
[sigmove 08:38:55 DEBUG] transformed T160Ma.SPC -> T160MA.SPC
[sigmove 08:38:55 DEBUG] transformed T160Mb.SPC -> T160MB.SPC
[sigmove 08:38:55 DEBUG] transformed T160Mc.SPC -> T160MC.SPC
[sigmove 08:38:55 DEBUG] transformed T160Md.SPC -> T160MD.SPC
[sigmove 08:38:55 DEBUG] transformed T160Me.SPC -> T160ME.SPC
[sigmove 08:38:55 DEBUG] transformed T160Mf.SPC -> T160MF.SPC
[Status 08:38:55 INFO] data for T160 transferred to science data processing
[Tidy 08:38:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:38:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:38:55 INFO] resetting WatchDogTimer
[Status 08:38:55 INFO] Starting Set [AERI set: name U160, 6 scans, 0 angle, D16300 command]
[Ingest 08:38:55 INFO] Sending XML status message
[Status 08:38:55 INFO] Mirror angle: 0
[Mirror 08:38:55 INFO] rotating to position U
[Status 08:38:56 INFO] .SET file for ACQ96 ready
[Ingest 08:38:56 INFO] Starting acquisition
[Status 08:38:56 INFO] reading housekeeping
[Status 08:39:15 INFO] acquire complete
[Status 08:39:15 INFO] writing housekeeping
[Sequencer 08:39:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:39:15 INFO] incremented U scene to 160 completed views
[Sequencer 08:39:15 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:39:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:39:15 INFO] incremented to [AERI set: name V160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:39:15 INFO] U160.SIG(18)
[sigmove 08:39:15 DEBUG] transformed U160Ma.SPC -> U160MA.SPC
[sigmove 08:39:15 DEBUG] transformed U160Mb.SPC -> U160MB.SPC
[sigmove 08:39:15 DEBUG] transformed U160Mc.SPC -> U160MC.SPC
[sigmove 08:39:15 DEBUG] transformed U160Md.SPC -> U160MD.SPC
[sigmove 08:39:15 DEBUG] transformed U160Me.SPC -> U160ME.SPC
[sigmove 08:39:15 DEBUG] transformed U160Mf.SPC -> U160MF.SPC
[Status 08:39:15 INFO] data for U160 transferred to science data processing
[Tidy 08:39:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:39:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:39:15 INFO] resetting WatchDogTimer
[Status 08:39:16 INFO] Starting Set [AERI set: name V160, 6 scans, 0 angle, D16300 command]
[Ingest 08:39:16 INFO] Sending XML status message
[Status 08:39:16 INFO] Mirror angle: 0
[Mirror 08:39:16 INFO] rotating to position V
[Status 08:39:17 INFO] .SET file for ACQ96 ready
[Ingest 08:39:17 INFO] Starting acquisition
[Status 08:39:17 INFO] reading housekeeping
[Status 08:39:35 INFO] acquire complete
[Status 08:39:35 INFO] writing housekeeping
[Sequencer 08:39:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:39:35 INFO] incremented V scene to 160 completed views
[Sequencer 08:39:35 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:39:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:39:35 INFO] incremented to [AERI set: name W160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:39:35 INFO] V160.SIG(18)
[sigmove 08:39:35 DEBUG] transformed V160Ma.SPC -> V160MA.SPC
[sigmove 08:39:35 DEBUG] transformed V160Mb.SPC -> V160MB.SPC
[sigmove 08:39:35 DEBUG] transformed V160Mc.SPC -> V160MC.SPC
[sigmove 08:39:35 DEBUG] transformed V160Md.SPC -> V160MD.SPC
[sigmove 08:39:35 DEBUG] transformed V160Me.SPC -> V160ME.SPC
[sigmove 08:39:35 DEBUG] transformed V160Mf.SPC -> V160MF.SPC
[Status 08:39:35 INFO] data for V160 transferred to science data processing
[Tidy 08:39:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:39:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:39:35 INFO] resetting WatchDogTimer
[Status 08:39:36 INFO] Starting Set [AERI set: name W160, 6 scans, 0 angle, D16300 command]
[Ingest 08:39:36 INFO] Sending XML status message
[Status 08:39:36 INFO] Mirror angle: 0
[Mirror 08:39:36 INFO] rotating to position W
[Status 08:39:36 INFO] .SET file for ACQ96 ready
[Ingest 08:39:36 INFO] Starting acquisition
[Status 08:39:37 INFO] reading housekeeping
[Status 08:39:55 INFO] acquire complete
[Status 08:39:56 INFO] writing housekeeping
[Sequencer 08:39:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:39:56 INFO] incremented W scene to 160 completed views
[Sequencer 08:39:56 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:39:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:39:56 INFO] incremented to [AERI set: name X160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:39:56 INFO] W160.SIG(18)
[sigmove 08:39:56 DEBUG] transformed W160Ma.SPC -> W160MA.SPC
[sigmove 08:39:56 DEBUG] transformed W160Mb.SPC -> W160MB.SPC
[sigmove 08:39:56 DEBUG] transformed W160Mc.SPC -> W160MC.SPC
[sigmove 08:39:56 DEBUG] transformed W160Md.SPC -> W160MD.SPC
[sigmove 08:39:56 DEBUG] transformed W160Me.SPC -> W160ME.SPC
[sigmove 08:39:56 DEBUG] transformed W160Mf.SPC -> W160MF.SPC
[Status 08:39:56 INFO] data for W160 transferred to science data processing
[Tidy 08:39:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:39:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:39:56 INFO] resetting WatchDogTimer
[Status 08:39:56 INFO] Starting Set [AERI set: name X160, 6 scans, 0 angle, D16300 command]
[Ingest 08:39:56 INFO] Sending XML status message
[Status 08:39:56 INFO] Mirror angle: 0
[Mirror 08:39:56 INFO] rotating to position X
[Status 08:39:56 INFO] .SET file for ACQ96 ready
[Ingest 08:39:57 INFO] Starting acquisition
[Status 08:39:57 INFO] reading housekeeping
[Status 08:40:15 INFO] acquire complete
[Status 08:40:16 INFO] writing housekeeping
[Sequencer 08:40:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:40:16 INFO] incremented X scene to 160 completed views
[Sequencer 08:40:16 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:40:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:40:16 INFO] incremented to [AERI set: name Y160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:40:16 INFO] X160.SIG(18)
[sigmove 08:40:16 DEBUG] transformed X160Ma.SPC -> X160MA.SPC
[sigmove 08:40:16 DEBUG] transformed X160Mb.SPC -> X160MB.SPC
[sigmove 08:40:16 DEBUG] transformed X160Mc.SPC -> X160MC.SPC
[sigmove 08:40:16 DEBUG] transformed X160Md.SPC -> X160MD.SPC
[sigmove 08:40:16 DEBUG] transformed X160Me.SPC -> X160ME.SPC
[sigmove 08:40:16 DEBUG] transformed X160Mf.SPC -> X160MF.SPC
[Status 08:40:16 INFO] data for X160 transferred to science data processing
[Tidy 08:40:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:40:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:40:16 INFO] resetting WatchDogTimer
[Status 08:40:16 INFO] Starting Set [AERI set: name Y160, 6 scans, 0 angle, D16300 command]
[Ingest 08:40:16 INFO] Sending XML status message
[Status 08:40:16 INFO] Mirror angle: 0
[Mirror 08:40:16 INFO] rotating to position Y
[Status 08:40:17 INFO] .SET file for ACQ96 ready
[Ingest 08:40:17 INFO] Starting acquisition
[Status 08:40:17 INFO] reading housekeeping
[Status 08:40:35 INFO] acquire complete
[Status 08:40:36 INFO] writing housekeeping
[Sequencer 08:40:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:40:36 INFO] incremented Y scene to 160 completed views
[Sequencer 08:40:36 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:40:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:40:36 INFO] incremented to [AERI set: name Z160, 6 scans, 0 angle, D16300 command] set
[sigmove 08:40:36 INFO] Y160.SIG(18)
[sigmove 08:40:36 DEBUG] transformed Y160Ma.SPC -> Y160MA.SPC
[sigmove 08:40:36 DEBUG] transformed Y160Mb.SPC -> Y160MB.SPC
[sigmove 08:40:36 DEBUG] transformed Y160Mc.SPC -> Y160MC.SPC
[sigmove 08:40:36 DEBUG] transformed Y160Md.SPC -> Y160MD.SPC
[sigmove 08:40:36 DEBUG] transformed Y160Me.SPC -> Y160ME.SPC
[sigmove 08:40:36 DEBUG] transformed Y160Mf.SPC -> Y160MF.SPC
[Status 08:40:36 INFO] data for Y160 transferred to science data processing
[Tidy 08:40:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:40:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:40:36 INFO] resetting WatchDogTimer
[Status 08:40:36 INFO] Starting Set [AERI set: name Z160, 6 scans, 0 angle, D16300 command]
[Ingest 08:40:36 INFO] Sending XML status message
[Status 08:40:36 INFO] Mirror angle: 0
[Mirror 08:40:36 INFO] rotating to position Z
[Status 08:40:37 INFO] .SET file for ACQ96 ready
[Ingest 08:40:37 INFO] Starting acquisition
[Status 08:40:37 INFO] reading housekeeping
[Status 08:40:55 INFO] acquire complete
[Status 08:40:56 INFO] writing housekeeping
[Sequencer 08:40:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:40:56 INFO] incremented Z scene to 160 completed views
[Sequencer 08:40:56 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:40:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:40:56 INFO] incremented to [AERI set: name H161, 6 scans, 60 angle, D22500 command] set
[sigmove 08:40:56 INFO] Z160.SIG(18)
[sigmove 08:40:56 DEBUG] transformed Z160Ma.SPC -> Z160MA.SPC
[sigmove 08:40:56 DEBUG] transformed Z160Mb.SPC -> Z160MB.SPC
[sigmove 08:40:56 DEBUG] transformed Z160Mc.SPC -> Z160MC.SPC
[sigmove 08:40:56 DEBUG] transformed Z160Md.SPC -> Z160MD.SPC
[sigmove 08:40:56 DEBUG] transformed Z160Me.SPC -> Z160ME.SPC
[sigmove 08:40:56 DEBUG] transformed Z160Mf.SPC -> Z160MF.SPC
[Status 08:40:56 INFO] data for Z160 transferred to science data processing
[Tidy 08:40:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:40:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:40:56 INFO] resetting WatchDogTimer
[Status 08:40:56 INFO] Starting Set [AERI set: name H161, 6 scans, 60 angle, D22500 command]
[Ingest 08:40:56 INFO] Sending XML status message
[Status 08:40:56 INFO] Mirror angle: 60
[Mirror 08:40:57 INFO] rotating to position H
[Status 08:40:57 INFO] .SET file for ACQ96 ready
[Ingest 08:40:58 INFO] Starting acquisition
[Status 08:40:58 INFO] reading housekeeping
[Status 08:41:16 INFO] acquire complete
[Status 08:41:16 INFO] writing housekeeping
[Sequencer 08:41:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:41:16 INFO] incremented H scene to 161 completed views
[Sequencer 08:41:16 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:41:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:41:16 INFO] incremented to [AERI set: name A161, 6 scans, 120 angle, D28300 command] set
[sigmove 08:41:16 INFO] H161.SIG(18)
[sigmove 08:41:16 DEBUG] transformed H161Ma.SPC -> H161MA.SPC
[sigmove 08:41:16 DEBUG] transformed H161Mb.SPC -> H161MB.SPC
[sigmove 08:41:16 DEBUG] transformed H161Mc.SPC -> H161MC.SPC
[sigmove 08:41:16 DEBUG] transformed H161Md.SPC -> H161MD.SPC
[sigmove 08:41:16 DEBUG] transformed H161Me.SPC -> H161ME.SPC
[sigmove 08:41:16 DEBUG] transformed H161Mf.SPC -> H161MF.SPC
[Status 08:41:16 INFO] data for H161 transferred to science data processing
[Tidy 08:41:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:41:16 INFO] A159.FIN(19),H159.FIN(19),S159.FIN(19),T159.FIN(19),U159.FIN(19),V159.FIN(19),W159.FIN(19),X159.FIN(19),Y159.FIN(19),Z159.FIN(19),A160.FIN(19),H160.FIN(19),S160.FIN(19),T160.FIN(19),U160.FIN(19),V160.FIN(19),W160.FIN(19),X160.FIN(19),Y160.FIN(19),Z160.FIN(19)
[sigmove 08:41:16 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:41:16 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:41:19 DEBUG] done zipping
[WatchDog 08:41:19 INFO] resetting WatchDogTimer
[Status 08:41:20 INFO] Starting Set [AERI set: name A161, 6 scans, 120 angle, D28300 command]
[Ingest 08:41:20 INFO] Sending XML status message
[Status 08:41:20 INFO] Mirror angle: 120
[Mirror 08:41:20 INFO] rotating to position A
[Status 08:41:21 INFO] .SET file for ACQ96 ready
[Ingest 08:41:21 INFO] Starting acquisition
[Status 08:41:21 INFO] reading housekeeping
[Status 08:41:39 INFO] acquire complete
[Status 08:41:40 INFO] writing housekeeping
[Sequencer 08:41:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:41:40 INFO] incremented A scene to 161 completed views
[Sequencer 08:41:40 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:41:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:41:40 INFO] incremented to [AERI set: name S161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:41:40 INFO] A161.SIG(18)
[sigmove 08:41:40 DEBUG] transformed A161Ma.SPC -> A161MA.SPC
[sigmove 08:41:40 DEBUG] transformed A161Mb.SPC -> A161MB.SPC
[sigmove 08:41:40 DEBUG] transformed A161Mc.SPC -> A161MC.SPC
[sigmove 08:41:40 DEBUG] transformed A161Md.SPC -> A161MD.SPC
[sigmove 08:41:40 DEBUG] transformed A161Me.SPC -> A161ME.SPC
[sigmove 08:41:40 DEBUG] transformed A161Mf.SPC -> A161MF.SPC
[Status 08:41:40 INFO] data for A161 transferred to science data processing
[Tidy 08:41:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:41:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:41:40 INFO] resetting WatchDogTimer
[Status 08:41:40 INFO] Starting Set [AERI set: name S161, 6 scans, 0 angle, D16300 command]
[Ingest 08:41:40 INFO] Sending XML status message
[Status 08:41:40 INFO] Mirror angle: 0
[Mirror 08:41:40 INFO] rotating to position S
[Status 08:41:42 INFO] .SET file for ACQ96 ready
[Ingest 08:41:42 INFO] Starting acquisition
[Status 08:41:42 INFO] reading housekeeping
[Status 08:42:04 INFO] acquire complete
[Status 08:42:05 INFO] writing housekeeping
[Sequencer 08:42:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:42:05 INFO] incremented S scene to 161 completed views
[Sequencer 08:42:05 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:42:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:42:05 INFO] incremented to [AERI set: name T161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:42:05 INFO] S161.SIG(18)
[sigmove 08:42:05 DEBUG] transformed S161Ma.SPC -> S161MA.SPC
[sigmove 08:42:05 DEBUG] transformed S161Mb.SPC -> S161MB.SPC
[sigmove 08:42:05 DEBUG] transformed S161Mc.SPC -> S161MC.SPC
[sigmove 08:42:05 DEBUG] transformed S161Md.SPC -> S161MD.SPC
[sigmove 08:42:05 DEBUG] transformed S161Me.SPC -> S161ME.SPC
[sigmove 08:42:05 DEBUG] transformed S161Mf.SPC -> S161MF.SPC
[Status 08:42:05 INFO] data for S161 transferred to science data processing
[Tidy 08:42:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:42:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:42:05 INFO] resetting WatchDogTimer
[Status 08:42:05 INFO] Starting Set [AERI set: name T161, 6 scans, 0 angle, D16300 command]
[Ingest 08:42:05 INFO] Sending XML status message
[Status 08:42:05 INFO] Mirror angle: 0
[Mirror 08:42:05 INFO] rotating to position T
[Status 08:42:05 INFO] .SET file for ACQ96 ready
[Ingest 08:42:06 INFO] Starting acquisition
[Status 08:42:06 INFO] reading housekeeping
[Status 08:42:24 INFO] acquire complete
[Status 08:42:25 INFO] writing housekeeping
[Sequencer 08:42:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:42:25 INFO] incremented T scene to 161 completed views
[Sequencer 08:42:25 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:42:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:42:25 INFO] incremented to [AERI set: name U161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:42:25 INFO] T161.SIG(18)
[sigmove 08:42:25 DEBUG] transformed T161Ma.SPC -> T161MA.SPC
[sigmove 08:42:25 DEBUG] transformed T161Mb.SPC -> T161MB.SPC
[sigmove 08:42:25 DEBUG] transformed T161Mc.SPC -> T161MC.SPC
[sigmove 08:42:25 DEBUG] transformed T161Md.SPC -> T161MD.SPC
[sigmove 08:42:25 DEBUG] transformed T161Me.SPC -> T161ME.SPC
[sigmove 08:42:25 DEBUG] transformed T161Mf.SPC -> T161MF.SPC
[Status 08:42:25 INFO] data for T161 transferred to science data processing
[Tidy 08:42:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:42:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:42:25 INFO] resetting WatchDogTimer
[Status 08:42:25 INFO] Starting Set [AERI set: name U161, 6 scans, 0 angle, D16300 command]
[Ingest 08:42:25 INFO] Sending XML status message
[Status 08:42:25 INFO] Mirror angle: 0
[Mirror 08:42:25 INFO] rotating to position U
[Status 08:42:26 INFO] .SET file for ACQ96 ready
[Ingest 08:42:26 INFO] Starting acquisition
[Status 08:42:26 INFO] reading housekeeping
[Status 08:42:44 INFO] acquire complete
[Status 08:42:45 INFO] writing housekeeping
[Sequencer 08:42:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:42:45 INFO] incremented U scene to 161 completed views
[Sequencer 08:42:45 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:42:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:42:45 INFO] incremented to [AERI set: name V161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:42:45 INFO] U161.SIG(18)
[sigmove 08:42:45 DEBUG] transformed U161Ma.SPC -> U161MA.SPC
[sigmove 08:42:45 DEBUG] transformed U161Mb.SPC -> U161MB.SPC
[sigmove 08:42:45 DEBUG] transformed U161Mc.SPC -> U161MC.SPC
[sigmove 08:42:45 DEBUG] transformed U161Md.SPC -> U161MD.SPC
[sigmove 08:42:45 DEBUG] transformed U161Me.SPC -> U161ME.SPC
[sigmove 08:42:45 DEBUG] transformed U161Mf.SPC -> U161MF.SPC
[Status 08:42:45 INFO] data for U161 transferred to science data processing
[Tidy 08:42:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:42:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:42:45 INFO] resetting WatchDogTimer
[Status 08:42:45 INFO] Starting Set [AERI set: name V161, 6 scans, 0 angle, D16300 command]
[Ingest 08:42:45 INFO] Sending XML status message
[Status 08:42:45 INFO] Mirror angle: 0
[Mirror 08:42:45 INFO] rotating to position V
[Status 08:42:46 INFO] .SET file for ACQ96 ready
[Ingest 08:42:46 INFO] Starting acquisition
[Status 08:42:46 INFO] reading housekeeping
[Status 08:43:04 INFO] acquire complete
[Status 08:43:05 INFO] writing housekeeping
[Sequencer 08:43:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:43:05 INFO] incremented V scene to 161 completed views
[Sequencer 08:43:05 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:43:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:43:05 INFO] incremented to [AERI set: name W161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:43:05 INFO] V161.SIG(18)
[sigmove 08:43:05 DEBUG] transformed V161Ma.SPC -> V161MA.SPC
[sigmove 08:43:05 DEBUG] transformed V161Mb.SPC -> V161MB.SPC
[sigmove 08:43:05 DEBUG] transformed V161Mc.SPC -> V161MC.SPC
[sigmove 08:43:05 DEBUG] transformed V161Md.SPC -> V161MD.SPC
[sigmove 08:43:05 DEBUG] transformed V161Me.SPC -> V161ME.SPC
[sigmove 08:43:05 DEBUG] transformed V161Mf.SPC -> V161MF.SPC
[Status 08:43:05 INFO] data for V161 transferred to science data processing
[Tidy 08:43:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:43:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:43:05 INFO] resetting WatchDogTimer
[Status 08:43:05 INFO] Starting Set [AERI set: name W161, 6 scans, 0 angle, D16300 command]
[Ingest 08:43:05 INFO] Sending XML status message
[Status 08:43:05 INFO] Mirror angle: 0
[Mirror 08:43:06 INFO] rotating to position W
[Status 08:43:06 INFO] .SET file for ACQ96 ready
[Ingest 08:43:06 INFO] Starting acquisition
[Status 08:43:06 INFO] reading housekeeping
[Status 08:43:25 INFO] acquire complete
[Status 08:43:25 INFO] writing housekeeping
[Sequencer 08:43:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:43:25 INFO] incremented W scene to 161 completed views
[Sequencer 08:43:25 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:43:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:43:25 INFO] incremented to [AERI set: name X161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:43:25 INFO] W161.SIG(18)
[sigmove 08:43:25 DEBUG] transformed W161Ma.SPC -> W161MA.SPC
[sigmove 08:43:25 DEBUG] transformed W161Mb.SPC -> W161MB.SPC
[sigmove 08:43:25 DEBUG] transformed W161Mc.SPC -> W161MC.SPC
[sigmove 08:43:25 DEBUG] transformed W161Md.SPC -> W161MD.SPC
[sigmove 08:43:25 DEBUG] transformed W161Me.SPC -> W161ME.SPC
[sigmove 08:43:25 DEBUG] transformed W161Mf.SPC -> W161MF.SPC
[Status 08:43:25 INFO] data for W161 transferred to science data processing
[Tidy 08:43:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:43:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:43:25 INFO] resetting WatchDogTimer
[Status 08:43:26 INFO] Starting Set [AERI set: name X161, 6 scans, 0 angle, D16300 command]
[Ingest 08:43:26 INFO] Sending XML status message
[Status 08:43:26 INFO] Mirror angle: 0
[Mirror 08:43:26 INFO] rotating to position X
[Status 08:43:26 INFO] .SET file for ACQ96 ready
[Ingest 08:43:26 INFO] Starting acquisition
[Status 08:43:27 INFO] reading housekeeping
[Status 08:43:45 INFO] acquire complete
[Status 08:43:45 INFO] writing housekeeping
[Sequencer 08:43:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:43:45 INFO] incremented X scene to 161 completed views
[Sequencer 08:43:45 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:43:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:43:45 INFO] incremented to [AERI set: name Y161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:43:45 INFO] X161.SIG(18)
[sigmove 08:43:45 DEBUG] transformed X161Ma.SPC -> X161MA.SPC
[sigmove 08:43:45 DEBUG] transformed X161Mb.SPC -> X161MB.SPC
[sigmove 08:43:45 DEBUG] transformed X161Mc.SPC -> X161MC.SPC
[sigmove 08:43:45 DEBUG] transformed X161Md.SPC -> X161MD.SPC
[sigmove 08:43:45 DEBUG] transformed X161Me.SPC -> X161ME.SPC
[sigmove 08:43:45 DEBUG] transformed X161Mf.SPC -> X161MF.SPC
[Status 08:43:45 INFO] data for X161 transferred to science data processing
[Tidy 08:43:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:43:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:43:45 INFO] resetting WatchDogTimer
[Status 08:43:46 INFO] Starting Set [AERI set: name Y161, 6 scans, 0 angle, D16300 command]
[Ingest 08:43:46 INFO] Sending XML status message
[Status 08:43:46 INFO] Mirror angle: 0
[Mirror 08:43:46 INFO] rotating to position Y
[Status 08:43:46 INFO] .SET file for ACQ96 ready
[Ingest 08:43:46 INFO] Starting acquisition
[Status 08:43:47 INFO] reading housekeeping
[Status 08:44:05 INFO] acquire complete
[Status 08:44:06 INFO] writing housekeeping
[Sequencer 08:44:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:44:06 INFO] incremented Y scene to 161 completed views
[Sequencer 08:44:06 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:44:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:44:06 INFO] incremented to [AERI set: name Z161, 6 scans, 0 angle, D16300 command] set
[sigmove 08:44:06 INFO] Y161.SIG(18)
[sigmove 08:44:06 DEBUG] transformed Y161Ma.SPC -> Y161MA.SPC
[sigmove 08:44:06 DEBUG] transformed Y161Mb.SPC -> Y161MB.SPC
[sigmove 08:44:06 DEBUG] transformed Y161Mc.SPC -> Y161MC.SPC
[sigmove 08:44:06 DEBUG] transformed Y161Md.SPC -> Y161MD.SPC
[sigmove 08:44:06 DEBUG] transformed Y161Me.SPC -> Y161ME.SPC
[sigmove 08:44:06 DEBUG] transformed Y161Mf.SPC -> Y161MF.SPC
[Status 08:44:06 INFO] data for Y161 transferred to science data processing
[Tidy 08:44:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:44:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:44:06 INFO] resetting WatchDogTimer
[Status 08:44:06 INFO] Starting Set [AERI set: name Z161, 6 scans, 0 angle, D16300 command]
[Ingest 08:44:06 INFO] Sending XML status message
[Status 08:44:06 INFO] Mirror angle: 0
[Mirror 08:44:06 INFO] rotating to position Z
[Status 08:44:07 INFO] .SET file for ACQ96 ready
[Ingest 08:44:08 INFO] Starting acquisition
[Status 08:44:08 INFO] reading housekeeping
[Status 08:44:26 INFO] acquire complete
[Status 08:44:27 INFO] writing housekeeping
[Sequencer 08:44:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:44:27 INFO] incremented Z scene to 161 completed views
[Sequencer 08:44:27 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:44:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:44:27 INFO] incremented to [AERI set: name A162, 6 scans, 120 angle, D28300 command] set
[sigmove 08:44:27 INFO] Z161.SIG(18)
[sigmove 08:44:27 DEBUG] transformed Z161Ma.SPC -> Z161MA.SPC
[sigmove 08:44:27 DEBUG] transformed Z161Mb.SPC -> Z161MB.SPC
[sigmove 08:44:27 DEBUG] transformed Z161Mc.SPC -> Z161MC.SPC
[sigmove 08:44:27 DEBUG] transformed Z161Md.SPC -> Z161MD.SPC
[sigmove 08:44:27 DEBUG] transformed Z161Me.SPC -> Z161ME.SPC
[sigmove 08:44:27 DEBUG] transformed Z161Mf.SPC -> Z161MF.SPC
[Status 08:44:27 INFO] data for Z161 transferred to science data processing
[Tidy 08:44:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:44:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:44:27 INFO] resetting WatchDogTimer
[Status 08:44:27 INFO] Starting Set [AERI set: name A162, 6 scans, 120 angle, D28300 command]
[Ingest 08:44:27 INFO] Sending XML status message
[Status 08:44:27 INFO] Mirror angle: 120
[Mirror 08:44:27 INFO] rotating to position A
[Status 08:44:29 INFO] .SET file for ACQ96 ready
[Ingest 08:44:29 INFO] Starting acquisition
[Status 08:44:29 INFO] reading housekeeping
[Status 08:44:47 INFO] acquire complete
[Status 08:44:47 INFO] writing housekeeping
[Sequencer 08:44:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:44:47 INFO] incremented A scene to 162 completed views
[Sequencer 08:44:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:44:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:44:47 INFO] incremented to [AERI set: name H162, 6 scans, 60 angle, D22500 command] set
[sigmove 08:44:47 INFO] A162.SIG(18)
[sigmove 08:44:47 DEBUG] transformed A162Ma.SPC -> A162MA.SPC
[sigmove 08:44:47 DEBUG] transformed A162Mb.SPC -> A162MB.SPC
[sigmove 08:44:47 DEBUG] transformed A162Mc.SPC -> A162MC.SPC
[sigmove 08:44:47 DEBUG] transformed A162Md.SPC -> A162MD.SPC
[sigmove 08:44:47 DEBUG] transformed A162Me.SPC -> A162ME.SPC
[sigmove 08:44:47 DEBUG] transformed A162Mf.SPC -> A162MF.SPC
[Status 08:44:47 INFO] data for A162 transferred to science data processing
[Tidy 08:44:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:44:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:44:47 INFO] resetting WatchDogTimer
[Status 08:44:47 INFO] Starting Set [AERI set: name H162, 6 scans, 60 angle, D22500 command]
[Ingest 08:44:47 INFO] Sending XML status message
[Status 08:44:47 INFO] Mirror angle: 60
[Mirror 08:44:48 INFO] rotating to position H
[Status 08:44:48 INFO] .SET file for ACQ96 ready
[Ingest 08:44:49 INFO] Starting acquisition
[Status 08:44:49 INFO] reading housekeeping
[Status 08:45:07 INFO] acquire complete
[Status 08:45:07 INFO] writing housekeeping
[Sequencer 08:45:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:45:07 INFO] incremented H scene to 162 completed views
[Sequencer 08:45:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:45:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:45:07 INFO] incremented to [AERI set: name S162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:45:07 INFO] H162.SIG(18)
[sigmove 08:45:07 DEBUG] transformed H162Ma.SPC -> H162MA.SPC
[sigmove 08:45:07 DEBUG] transformed H162Mb.SPC -> H162MB.SPC
[sigmove 08:45:07 DEBUG] transformed H162Mc.SPC -> H162MC.SPC
[sigmove 08:45:07 DEBUG] transformed H162Md.SPC -> H162MD.SPC
[sigmove 08:45:07 DEBUG] transformed H162Me.SPC -> H162ME.SPC
[sigmove 08:45:07 DEBUG] transformed H162Mf.SPC -> H162MF.SPC
[Status 08:45:07 INFO] data for H162 transferred to science data processing
[Tidy 08:45:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:45:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:45:07 INFO] resetting WatchDogTimer
[Status 08:45:08 INFO] Starting Set [AERI set: name S162, 6 scans, 0 angle, D16300 command]
[Ingest 08:45:08 INFO] Sending XML status message
[Status 08:45:08 INFO] Mirror angle: 0
[Mirror 08:45:08 INFO] rotating to position S
[Status 08:45:09 INFO] .SET file for ACQ96 ready
[Ingest 08:45:09 INFO] Starting acquisition
[Status 08:45:09 INFO] reading housekeeping
[Status 08:45:27 INFO] acquire complete
[Status 08:45:28 INFO] writing housekeeping
[Sequencer 08:45:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:45:28 INFO] incremented S scene to 162 completed views
[Sequencer 08:45:28 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:45:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:45:28 INFO] incremented to [AERI set: name T162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:45:28 INFO] S162.SIG(18)
[sigmove 08:45:28 DEBUG] transformed S162Ma.SPC -> S162MA.SPC
[sigmove 08:45:28 DEBUG] transformed S162Mb.SPC -> S162MB.SPC
[sigmove 08:45:28 DEBUG] transformed S162Mc.SPC -> S162MC.SPC
[sigmove 08:45:28 DEBUG] transformed S162Md.SPC -> S162MD.SPC
[sigmove 08:45:28 DEBUG] transformed S162Me.SPC -> S162ME.SPC
[sigmove 08:45:28 DEBUG] transformed S162Mf.SPC -> S162MF.SPC
[Status 08:45:28 INFO] data for S162 transferred to science data processing
[Tidy 08:45:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:45:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:45:28 INFO] resetting WatchDogTimer
[Status 08:45:28 INFO] Starting Set [AERI set: name T162, 6 scans, 0 angle, D16300 command]
[Ingest 08:45:28 INFO] Sending XML status message
[Status 08:45:28 INFO] Mirror angle: 0
[Mirror 08:45:28 INFO] rotating to position T
[Status 08:45:28 INFO] .SET file for ACQ96 ready
[Ingest 08:45:29 INFO] Starting acquisition
[Status 08:45:29 INFO] reading housekeeping
[Status 08:45:47 INFO] acquire complete
[Status 08:45:48 INFO] writing housekeeping
[Sequencer 08:45:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:45:48 INFO] incremented T scene to 162 completed views
[Sequencer 08:45:48 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:45:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:45:48 INFO] incremented to [AERI set: name U162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:45:48 INFO] T162.SIG(18)
[sigmove 08:45:48 DEBUG] transformed T162Ma.SPC -> T162MA.SPC
[sigmove 08:45:48 DEBUG] transformed T162Mb.SPC -> T162MB.SPC
[sigmove 08:45:48 DEBUG] transformed T162Mc.SPC -> T162MC.SPC
[sigmove 08:45:48 DEBUG] transformed T162Md.SPC -> T162MD.SPC
[sigmove 08:45:48 DEBUG] transformed T162Me.SPC -> T162ME.SPC
[sigmove 08:45:48 DEBUG] transformed T162Mf.SPC -> T162MF.SPC
[Status 08:45:48 INFO] data for T162 transferred to science data processing
[Tidy 08:45:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:45:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:45:48 INFO] resetting WatchDogTimer
[Status 08:45:49 INFO] Starting Set [AERI set: name U162, 6 scans, 0 angle, D16300 command]
[Ingest 08:45:49 INFO] Sending XML status message
[Status 08:45:49 INFO] Mirror angle: 0
[Mirror 08:45:49 INFO] rotating to position U
[Status 08:45:49 INFO] .SET file for ACQ96 ready
[Ingest 08:45:49 INFO] Starting acquisition
[Status 08:45:50 INFO] reading housekeeping
[Status 08:46:07 INFO] acquire complete
[Status 08:46:08 INFO] writing housekeeping
[Sequencer 08:46:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:46:08 INFO] incremented U scene to 162 completed views
[Sequencer 08:46:08 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:46:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:46:08 INFO] incremented to [AERI set: name V162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:46:08 INFO] U162.SIG(18)
[sigmove 08:46:08 DEBUG] transformed U162Ma.SPC -> U162MA.SPC
[sigmove 08:46:08 DEBUG] transformed U162Mb.SPC -> U162MB.SPC
[sigmove 08:46:08 DEBUG] transformed U162Mc.SPC -> U162MC.SPC
[sigmove 08:46:08 DEBUG] transformed U162Md.SPC -> U162MD.SPC
[sigmove 08:46:08 DEBUG] transformed U162Me.SPC -> U162ME.SPC
[sigmove 08:46:08 DEBUG] transformed U162Mf.SPC -> U162MF.SPC
[Status 08:46:08 INFO] data for U162 transferred to science data processing
[Tidy 08:46:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:46:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:46:08 INFO] resetting WatchDogTimer
[Status 08:46:08 INFO] Starting Set [AERI set: name V162, 6 scans, 0 angle, D16300 command]
[Ingest 08:46:08 INFO] Sending XML status message
[Status 08:46:08 INFO] Mirror angle: 0
[Mirror 08:46:08 INFO] rotating to position V
[Status 08:46:09 INFO] .SET file for ACQ96 ready
[Ingest 08:46:09 INFO] Starting acquisition
[Status 08:46:09 INFO] reading housekeeping
[Status 08:46:27 INFO] acquire complete
[Status 08:46:28 INFO] writing housekeeping
[Sequencer 08:46:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:46:28 INFO] incremented V scene to 162 completed views
[Sequencer 08:46:28 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:46:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:46:28 INFO] incremented to [AERI set: name W162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:46:28 INFO] V162.SIG(18)
[sigmove 08:46:28 DEBUG] transformed V162Ma.SPC -> V162MA.SPC
[sigmove 08:46:28 DEBUG] transformed V162Mb.SPC -> V162MB.SPC
[sigmove 08:46:28 DEBUG] transformed V162Mc.SPC -> V162MC.SPC
[sigmove 08:46:28 DEBUG] transformed V162Md.SPC -> V162MD.SPC
[sigmove 08:46:28 DEBUG] transformed V162Me.SPC -> V162ME.SPC
[sigmove 08:46:28 DEBUG] transformed V162Mf.SPC -> V162MF.SPC
[Status 08:46:28 INFO] data for V162 transferred to science data processing
[Tidy 08:46:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:46:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:46:28 INFO] resetting WatchDogTimer
[Status 08:46:28 INFO] Starting Set [AERI set: name W162, 6 scans, 0 angle, D16300 command]
[Ingest 08:46:28 INFO] Sending XML status message
[Status 08:46:28 INFO] Mirror angle: 0
[Mirror 08:46:29 INFO] rotating to position W
[Status 08:46:29 INFO] .SET file for ACQ96 ready
[Ingest 08:46:29 INFO] Starting acquisition
[Status 08:46:29 INFO] reading housekeeping
[Status 08:46:48 INFO] acquire complete
[Status 08:46:48 INFO] writing housekeeping
[Sequencer 08:46:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:46:48 INFO] incremented W scene to 162 completed views
[Sequencer 08:46:48 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:46:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:46:48 INFO] incremented to [AERI set: name X162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:46:48 INFO] W162.SIG(18)
[sigmove 08:46:48 DEBUG] transformed W162Ma.SPC -> W162MA.SPC
[sigmove 08:46:48 DEBUG] transformed W162Mb.SPC -> W162MB.SPC
[sigmove 08:46:48 DEBUG] transformed W162Mc.SPC -> W162MC.SPC
[sigmove 08:46:48 DEBUG] transformed W162Md.SPC -> W162MD.SPC
[sigmove 08:46:48 DEBUG] transformed W162Me.SPC -> W162ME.SPC
[sigmove 08:46:48 DEBUG] transformed W162Mf.SPC -> W162MF.SPC
[Status 08:46:48 INFO] data for W162 transferred to science data processing
[Tidy 08:46:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:46:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:46:48 INFO] resetting WatchDogTimer
[Status 08:46:49 INFO] Starting Set [AERI set: name X162, 6 scans, 0 angle, D16300 command]
[Ingest 08:46:49 INFO] Sending XML status message
[Status 08:46:49 INFO] Mirror angle: 0
[Mirror 08:46:49 INFO] rotating to position X
[Status 08:46:49 INFO] .SET file for ACQ96 ready
[Ingest 08:46:49 INFO] Starting acquisition
[Status 08:46:50 INFO] reading housekeeping
[Status 08:47:08 INFO] acquire complete
[Status 08:47:08 INFO] writing housekeeping
[Sequencer 08:47:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:47:08 INFO] incremented X scene to 162 completed views
[Sequencer 08:47:08 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:47:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:47:08 INFO] incremented to [AERI set: name Y162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:47:08 INFO] X162.SIG(18)
[sigmove 08:47:08 DEBUG] transformed X162Ma.SPC -> X162MA.SPC
[sigmove 08:47:08 DEBUG] transformed X162Mb.SPC -> X162MB.SPC
[sigmove 08:47:08 DEBUG] transformed X162Mc.SPC -> X162MC.SPC
[sigmove 08:47:08 DEBUG] transformed X162Md.SPC -> X162MD.SPC
[sigmove 08:47:08 DEBUG] transformed X162Me.SPC -> X162ME.SPC
[sigmove 08:47:08 DEBUG] transformed X162Mf.SPC -> X162MF.SPC
[Status 08:47:08 INFO] data for X162 transferred to science data processing
[Tidy 08:47:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:47:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:47:08 INFO] resetting WatchDogTimer
[Status 08:47:09 INFO] Starting Set [AERI set: name Y162, 6 scans, 0 angle, D16300 command]
[Ingest 08:47:09 INFO] Sending XML status message
[Status 08:47:09 INFO] Mirror angle: 0
[Mirror 08:47:09 INFO] rotating to position Y
[Status 08:47:09 INFO] .SET file for ACQ96 ready
[Ingest 08:47:09 INFO] Starting acquisition
[Status 08:47:10 INFO] reading housekeeping
[Status 08:47:28 INFO] acquire complete
[Status 08:47:29 INFO] writing housekeeping
[Sequencer 08:47:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:47:29 INFO] incremented Y scene to 162 completed views
[Sequencer 08:47:29 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:47:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:47:29 INFO] incremented to [AERI set: name Z162, 6 scans, 0 angle, D16300 command] set
[sigmove 08:47:29 INFO] Y162.SIG(18)
[sigmove 08:47:29 DEBUG] transformed Y162Ma.SPC -> Y162MA.SPC
[sigmove 08:47:29 DEBUG] transformed Y162Mb.SPC -> Y162MB.SPC
[sigmove 08:47:29 DEBUG] transformed Y162Mc.SPC -> Y162MC.SPC
[sigmove 08:47:29 DEBUG] transformed Y162Md.SPC -> Y162MD.SPC
[sigmove 08:47:29 DEBUG] transformed Y162Me.SPC -> Y162ME.SPC
[sigmove 08:47:29 DEBUG] transformed Y162Mf.SPC -> Y162MF.SPC
[Status 08:47:29 INFO] data for Y162 transferred to science data processing
[Tidy 08:47:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:47:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:47:29 INFO] resetting WatchDogTimer
[Status 08:47:29 INFO] Starting Set [AERI set: name Z162, 6 scans, 0 angle, D16300 command]
[Ingest 08:47:29 INFO] Sending XML status message
[Status 08:47:29 INFO] Mirror angle: 0
[Mirror 08:47:29 INFO] rotating to position Z
[Status 08:47:30 INFO] .SET file for ACQ96 ready
[Ingest 08:47:30 INFO] Starting acquisition
[Status 08:47:30 INFO] reading housekeeping
[Status 08:47:48 INFO] acquire complete
[Status 08:47:49 INFO] writing housekeeping
[Sequencer 08:47:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:47:49 INFO] incremented Z scene to 162 completed views
[Sequencer 08:47:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:47:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:47:49 INFO] incremented to [AERI set: name H163, 6 scans, 60 angle, D22500 command] set
[sigmove 08:47:49 INFO] Z162.SIG(18)
[sigmove 08:47:49 DEBUG] transformed Z162Ma.SPC -> Z162MA.SPC
[sigmove 08:47:49 DEBUG] transformed Z162Mb.SPC -> Z162MB.SPC
[sigmove 08:47:49 DEBUG] transformed Z162Mc.SPC -> Z162MC.SPC
[sigmove 08:47:49 DEBUG] transformed Z162Md.SPC -> Z162MD.SPC
[sigmove 08:47:49 DEBUG] transformed Z162Me.SPC -> Z162ME.SPC
[sigmove 08:47:49 DEBUG] transformed Z162Mf.SPC -> Z162MF.SPC
[Status 08:47:49 INFO] data for Z162 transferred to science data processing
[Tidy 08:47:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:47:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:47:49 INFO] resetting WatchDogTimer
[Status 08:47:49 INFO] Starting Set [AERI set: name H163, 6 scans, 60 angle, D22500 command]
[Ingest 08:47:49 INFO] Sending XML status message
[Status 08:47:49 INFO] Mirror angle: 60
[Mirror 08:47:49 INFO] rotating to position H
[Status 08:47:50 INFO] .SET file for ACQ96 ready
[Ingest 08:47:50 INFO] Starting acquisition
[Status 08:47:51 INFO] reading housekeeping
[Status 08:48:08 INFO] acquire complete
[Status 08:48:09 INFO] writing housekeeping
[Sequencer 08:48:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:48:09 INFO] incremented H scene to 163 completed views
[Sequencer 08:48:09 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:48:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:48:09 INFO] incremented to [AERI set: name A163, 6 scans, 120 angle, D28300 command] set
[sigmove 08:48:09 INFO] H163.SIG(18)
[sigmove 08:48:09 DEBUG] transformed H163Ma.SPC -> H163MA.SPC
[sigmove 08:48:09 DEBUG] transformed H163Mb.SPC -> H163MB.SPC
[sigmove 08:48:09 DEBUG] transformed H163Mc.SPC -> H163MC.SPC
[sigmove 08:48:09 DEBUG] transformed H163Md.SPC -> H163MD.SPC
[sigmove 08:48:09 DEBUG] transformed H163Me.SPC -> H163ME.SPC
[sigmove 08:48:09 DEBUG] transformed H163Mf.SPC -> H163MF.SPC
[Status 08:48:09 INFO] data for H163 transferred to science data processing
[Tidy 08:48:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:48:09 INFO] A161.FIN(19),H161.FIN(19),S161.FIN(19),T161.FIN(19),U161.FIN(19),V161.FIN(19),W161.FIN(19),X161.FIN(19),Y161.FIN(19),Z161.FIN(19),A162.FIN(19),H162.FIN(19),S162.FIN(19),T162.FIN(19),U162.FIN(19),V162.FIN(19),W162.FIN(19),X162.FIN(19),Y162.FIN(19),Z162.FIN(19)
[sigmove 08:48:09 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:48:09 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:48:12 DEBUG] done zipping
[WatchDog 08:48:12 INFO] resetting WatchDogTimer
[Status 08:48:12 INFO] Starting Set [AERI set: name A163, 6 scans, 120 angle, D28300 command]
[Ingest 08:48:12 INFO] Sending XML status message
[Status 08:48:12 INFO] Mirror angle: 120
[Mirror 08:48:13 INFO] rotating to position A
[Status 08:48:13 INFO] .SET file for ACQ96 ready
[Ingest 08:48:14 INFO] Starting acquisition
[Status 08:48:14 INFO] reading housekeeping
[Status 08:48:32 INFO] acquire complete
[Status 08:48:33 INFO] writing housekeeping
[Sequencer 08:48:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:48:33 INFO] incremented A scene to 163 completed views
[Sequencer 08:48:33 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:48:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:48:33 INFO] incremented to [AERI set: name S163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:48:33 INFO] A163.SIG(18)
[sigmove 08:48:33 DEBUG] transformed A163Ma.SPC -> A163MA.SPC
[sigmove 08:48:33 DEBUG] transformed A163Mb.SPC -> A163MB.SPC
[sigmove 08:48:33 DEBUG] transformed A163Mc.SPC -> A163MC.SPC
[sigmove 08:48:33 DEBUG] transformed A163Md.SPC -> A163MD.SPC
[sigmove 08:48:33 DEBUG] transformed A163Me.SPC -> A163ME.SPC
[sigmove 08:48:33 DEBUG] transformed A163Mf.SPC -> A163MF.SPC
[Status 08:48:33 INFO] data for A163 transferred to science data processing
[Tidy 08:48:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:48:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:48:33 INFO] resetting WatchDogTimer
[Status 08:48:33 INFO] Starting Set [AERI set: name S163, 6 scans, 0 angle, D16300 command]
[Ingest 08:48:33 INFO] Sending XML status message
[Status 08:48:33 INFO] Mirror angle: 0
[Mirror 08:48:33 INFO] rotating to position S
[Status 08:48:34 INFO] .SET file for ACQ96 ready
[Ingest 08:48:35 INFO] Starting acquisition
[Status 08:48:35 INFO] reading housekeeping
[Status 08:48:52 INFO] acquire complete
[Status 08:48:53 INFO] writing housekeeping
[Sequencer 08:48:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:48:53 INFO] incremented S scene to 163 completed views
[Sequencer 08:48:53 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:48:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:48:53 INFO] incremented to [AERI set: name T163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:48:53 INFO] S163.SIG(18)
[sigmove 08:48:53 DEBUG] transformed S163Ma.SPC -> S163MA.SPC
[sigmove 08:48:53 DEBUG] transformed S163Mb.SPC -> S163MB.SPC
[sigmove 08:48:53 DEBUG] transformed S163Mc.SPC -> S163MC.SPC
[sigmove 08:48:53 DEBUG] transformed S163Md.SPC -> S163MD.SPC
[sigmove 08:48:53 DEBUG] transformed S163Me.SPC -> S163ME.SPC
[sigmove 08:48:53 DEBUG] transformed S163Mf.SPC -> S163MF.SPC
[Status 08:48:53 INFO] data for S163 transferred to science data processing
[Tidy 08:48:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:48:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:48:53 INFO] resetting WatchDogTimer
[Status 08:48:53 INFO] Starting Set [AERI set: name T163, 6 scans, 0 angle, D16300 command]
[Ingest 08:48:53 INFO] Sending XML status message
[Status 08:48:53 INFO] Mirror angle: 0
[Mirror 08:48:53 INFO] rotating to position T
[Status 08:48:54 INFO] .SET file for ACQ96 ready
[Ingest 08:48:54 INFO] Starting acquisition
[Status 08:48:54 INFO] reading housekeeping
[Status 08:49:12 INFO] acquire complete
[Status 08:49:13 INFO] writing housekeeping
[Sequencer 08:49:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:49:13 INFO] incremented T scene to 163 completed views
[Sequencer 08:49:13 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:49:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:49:13 INFO] incremented to [AERI set: name U163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:49:13 INFO] T163.SIG(18)
[sigmove 08:49:13 DEBUG] transformed T163Ma.SPC -> T163MA.SPC
[sigmove 08:49:13 DEBUG] transformed T163Mb.SPC -> T163MB.SPC
[sigmove 08:49:13 DEBUG] transformed T163Mc.SPC -> T163MC.SPC
[sigmove 08:49:13 DEBUG] transformed T163Md.SPC -> T163MD.SPC
[sigmove 08:49:13 DEBUG] transformed T163Me.SPC -> T163ME.SPC
[sigmove 08:49:13 DEBUG] transformed T163Mf.SPC -> T163MF.SPC
[Status 08:49:13 INFO] data for T163 transferred to science data processing
[Tidy 08:49:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:49:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:49:13 INFO] resetting WatchDogTimer
[Status 08:49:13 INFO] Starting Set [AERI set: name U163, 6 scans, 0 angle, D16300 command]
[Ingest 08:49:13 INFO] Sending XML status message
[Status 08:49:13 INFO] Mirror angle: 0
[Mirror 08:49:13 INFO] rotating to position U
[Status 08:49:14 INFO] .SET file for ACQ96 ready
[Ingest 08:49:14 INFO] Starting acquisition
[Status 08:49:14 INFO] reading housekeeping
[Status 08:49:32 INFO] acquire complete
[Status 08:49:33 INFO] writing housekeeping
[Sequencer 08:49:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:49:33 INFO] incremented U scene to 163 completed views
[Sequencer 08:49:33 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:49:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:49:33 INFO] incremented to [AERI set: name V163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:49:33 INFO] U163.SIG(18)
[sigmove 08:49:33 DEBUG] transformed U163Ma.SPC -> U163MA.SPC
[sigmove 08:49:33 DEBUG] transformed U163Mb.SPC -> U163MB.SPC
[sigmove 08:49:33 DEBUG] transformed U163Mc.SPC -> U163MC.SPC
[sigmove 08:49:33 DEBUG] transformed U163Md.SPC -> U163MD.SPC
[sigmove 08:49:33 DEBUG] transformed U163Me.SPC -> U163ME.SPC
[sigmove 08:49:33 DEBUG] transformed U163Mf.SPC -> U163MF.SPC
[Status 08:49:33 INFO] data for U163 transferred to science data processing
[Tidy 08:49:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:49:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:49:33 INFO] resetting WatchDogTimer
[Status 08:49:33 INFO] Starting Set [AERI set: name V163, 6 scans, 0 angle, D16300 command]
[Ingest 08:49:33 INFO] Sending XML status message
[Status 08:49:33 INFO] Mirror angle: 0
[Mirror 08:49:34 INFO] rotating to position V
[Status 08:49:34 INFO] .SET file for ACQ96 ready
[Ingest 08:49:34 INFO] Starting acquisition
[Status 08:49:34 INFO] reading housekeeping
[Status 08:49:53 INFO] acquire complete
[Status 08:49:53 INFO] writing housekeeping
[Sequencer 08:49:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:49:53 INFO] incremented V scene to 163 completed views
[Sequencer 08:49:53 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:49:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:49:53 INFO] incremented to [AERI set: name W163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:49:53 INFO] V163.SIG(18)
[sigmove 08:49:53 DEBUG] transformed V163Ma.SPC -> V163MA.SPC
[sigmove 08:49:53 DEBUG] transformed V163Mb.SPC -> V163MB.SPC
[sigmove 08:49:53 DEBUG] transformed V163Mc.SPC -> V163MC.SPC
[sigmove 08:49:53 DEBUG] transformed V163Md.SPC -> V163MD.SPC
[sigmove 08:49:53 DEBUG] transformed V163Me.SPC -> V163ME.SPC
[sigmove 08:49:53 DEBUG] transformed V163Mf.SPC -> V163MF.SPC
[Status 08:49:53 INFO] data for V163 transferred to science data processing
[Tidy 08:49:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:49:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:49:53 INFO] resetting WatchDogTimer
[Status 08:49:54 INFO] Starting Set [AERI set: name W163, 6 scans, 0 angle, D16300 command]
[Ingest 08:49:54 INFO] Sending XML status message
[Status 08:49:54 INFO] Mirror angle: 0
[Mirror 08:49:54 INFO] rotating to position W
[Status 08:49:54 INFO] .SET file for ACQ96 ready
[Ingest 08:49:54 INFO] Starting acquisition
[Status 08:49:55 INFO] reading housekeeping
[Status 08:50:13 INFO] acquire complete
[Status 08:50:14 INFO] writing housekeeping
[Sequencer 08:50:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:50:14 INFO] incremented W scene to 163 completed views
[Sequencer 08:50:14 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:50:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:50:14 INFO] incremented to [AERI set: name X163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:50:14 INFO] W163.SIG(18)
[sigmove 08:50:14 DEBUG] transformed W163Ma.SPC -> W163MA.SPC
[sigmove 08:50:14 DEBUG] transformed W163Mb.SPC -> W163MB.SPC
[sigmove 08:50:14 DEBUG] transformed W163Mc.SPC -> W163MC.SPC
[sigmove 08:50:14 DEBUG] transformed W163Md.SPC -> W163MD.SPC
[sigmove 08:50:14 DEBUG] transformed W163Me.SPC -> W163ME.SPC
[sigmove 08:50:14 DEBUG] transformed W163Mf.SPC -> W163MF.SPC
[Status 08:50:14 INFO] data for W163 transferred to science data processing
[Tidy 08:50:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:50:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:50:14 INFO] resetting WatchDogTimer
[Status 08:50:14 INFO] Starting Set [AERI set: name X163, 6 scans, 0 angle, D16300 command]
[Ingest 08:50:14 INFO] Sending XML status message
[Status 08:50:14 INFO] Mirror angle: 0
[Mirror 08:50:14 INFO] rotating to position X
[Status 08:50:14 INFO] .SET file for ACQ96 ready
[Ingest 08:50:15 INFO] Starting acquisition
[Status 08:50:15 INFO] reading housekeeping
[Status 08:50:33 INFO] acquire complete
[Status 08:50:34 INFO] writing housekeeping
[Sequencer 08:50:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:50:34 INFO] incremented X scene to 163 completed views
[Sequencer 08:50:34 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:50:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:50:34 INFO] incremented to [AERI set: name Y163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:50:34 INFO] X163.SIG(18)
[sigmove 08:50:34 DEBUG] transformed X163Ma.SPC -> X163MA.SPC
[sigmove 08:50:34 DEBUG] transformed X163Mb.SPC -> X163MB.SPC
[sigmove 08:50:34 DEBUG] transformed X163Mc.SPC -> X163MC.SPC
[sigmove 08:50:34 DEBUG] transformed X163Md.SPC -> X163MD.SPC
[sigmove 08:50:34 DEBUG] transformed X163Me.SPC -> X163ME.SPC
[sigmove 08:50:34 DEBUG] transformed X163Mf.SPC -> X163MF.SPC
[Status 08:50:34 INFO] data for X163 transferred to science data processing
[Tidy 08:50:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:50:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:50:34 INFO] resetting WatchDogTimer
[Status 08:50:34 INFO] Starting Set [AERI set: name Y163, 6 scans, 0 angle, D16300 command]
[Ingest 08:50:34 INFO] Sending XML status message
[Status 08:50:34 INFO] Mirror angle: 0
[Mirror 08:50:34 INFO] rotating to position Y
[Status 08:50:35 INFO] .SET file for ACQ96 ready
[Ingest 08:50:35 INFO] Starting acquisition
[Status 08:50:35 INFO] reading housekeeping
[Status 08:50:53 INFO] acquire complete
[Status 08:50:54 INFO] writing housekeeping
[Sequencer 08:50:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:50:54 INFO] incremented Y scene to 163 completed views
[Sequencer 08:50:54 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:50:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:50:54 INFO] incremented to [AERI set: name Z163, 6 scans, 0 angle, D16300 command] set
[sigmove 08:50:54 INFO] Y163.SIG(18)
[sigmove 08:50:54 DEBUG] transformed Y163Ma.SPC -> Y163MA.SPC
[sigmove 08:50:54 DEBUG] transformed Y163Mb.SPC -> Y163MB.SPC
[sigmove 08:50:54 DEBUG] transformed Y163Mc.SPC -> Y163MC.SPC
[sigmove 08:50:54 DEBUG] transformed Y163Md.SPC -> Y163MD.SPC
[sigmove 08:50:54 DEBUG] transformed Y163Me.SPC -> Y163ME.SPC
[sigmove 08:50:54 DEBUG] transformed Y163Mf.SPC -> Y163MF.SPC
[Status 08:50:54 INFO] data for Y163 transferred to science data processing
[Tidy 08:50:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:50:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:50:54 INFO] resetting WatchDogTimer
[Status 08:50:54 INFO] Starting Set [AERI set: name Z163, 6 scans, 0 angle, D16300 command]
[Ingest 08:50:54 INFO] Sending XML status message
[Status 08:50:54 INFO] Mirror angle: 0
[Mirror 08:50:54 INFO] rotating to position Z
[Status 08:50:55 INFO] .SET file for ACQ96 ready
[Ingest 08:50:55 INFO] Starting acquisition
[Status 08:50:55 INFO] reading housekeeping
[Status 08:51:13 INFO] acquire complete
[Status 08:51:14 INFO] writing housekeeping
[Sequencer 08:51:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:51:14 INFO] incremented Z scene to 163 completed views
[Sequencer 08:51:14 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:51:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:51:14 INFO] incremented to [AERI set: name A164, 6 scans, 120 angle, D28300 command] set
[sigmove 08:51:14 INFO] Z163.SIG(18)
[sigmove 08:51:14 DEBUG] transformed Z163Ma.SPC -> Z163MA.SPC
[sigmove 08:51:14 DEBUG] transformed Z163Mb.SPC -> Z163MB.SPC
[sigmove 08:51:14 DEBUG] transformed Z163Mc.SPC -> Z163MC.SPC
[sigmove 08:51:14 DEBUG] transformed Z163Md.SPC -> Z163MD.SPC
[sigmove 08:51:14 DEBUG] transformed Z163Me.SPC -> Z163ME.SPC
[sigmove 08:51:14 DEBUG] transformed Z163Mf.SPC -> Z163MF.SPC
[Status 08:51:14 INFO] data for Z163 transferred to science data processing
[Tidy 08:51:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:51:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:51:14 INFO] resetting WatchDogTimer
[Status 08:51:14 INFO] Starting Set [AERI set: name A164, 6 scans, 120 angle, D28300 command]
[Ingest 08:51:14 INFO] Sending XML status message
[Status 08:51:14 INFO] Mirror angle: 120
[Mirror 08:51:15 INFO] rotating to position A
[Status 08:51:16 INFO] .SET file for ACQ96 ready
[Ingest 08:51:16 INFO] Starting acquisition
[Status 08:51:16 INFO] reading housekeeping
[Status 08:51:35 INFO] acquire complete
[Status 08:51:35 INFO] writing housekeeping
[Sequencer 08:51:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:51:35 INFO] incremented A scene to 164 completed views
[Sequencer 08:51:35 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:51:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:51:35 INFO] incremented to [AERI set: name H164, 6 scans, 60 angle, D22500 command] set
[sigmove 08:51:35 INFO] A164.SIG(18)
[sigmove 08:51:35 DEBUG] transformed A164Ma.SPC -> A164MA.SPC
[sigmove 08:51:35 DEBUG] transformed A164Mb.SPC -> A164MB.SPC
[sigmove 08:51:35 DEBUG] transformed A164Mc.SPC -> A164MC.SPC
[sigmove 08:51:35 DEBUG] transformed A164Md.SPC -> A164MD.SPC
[sigmove 08:51:35 DEBUG] transformed A164Me.SPC -> A164ME.SPC
[sigmove 08:51:35 DEBUG] transformed A164Mf.SPC -> A164MF.SPC
[Status 08:51:35 INFO] data for A164 transferred to science data processing
[Tidy 08:51:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:51:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:51:35 INFO] resetting WatchDogTimer
[Status 08:51:36 INFO] Starting Set [AERI set: name H164, 6 scans, 60 angle, D22500 command]
[Ingest 08:51:36 INFO] Sending XML status message
[Status 08:51:36 INFO] Mirror angle: 60
[Mirror 08:51:36 INFO] rotating to position H
[Status 08:51:37 INFO] .SET file for ACQ96 ready
[Ingest 08:51:37 INFO] Starting acquisition
[Status 08:51:37 INFO] reading housekeeping
[Status 08:51:55 INFO] acquire complete
[Status 08:51:56 INFO] writing housekeeping
[Sequencer 08:51:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:51:56 INFO] incremented H scene to 164 completed views
[Sequencer 08:51:56 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:51:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:51:56 INFO] incremented to [AERI set: name S164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:51:56 INFO] H164.SIG(18)
[sigmove 08:51:56 DEBUG] transformed H164Ma.SPC -> H164MA.SPC
[sigmove 08:51:56 DEBUG] transformed H164Mb.SPC -> H164MB.SPC
[sigmove 08:51:56 DEBUG] transformed H164Mc.SPC -> H164MC.SPC
[sigmove 08:51:56 DEBUG] transformed H164Md.SPC -> H164MD.SPC
[sigmove 08:51:56 DEBUG] transformed H164Me.SPC -> H164ME.SPC
[sigmove 08:51:56 DEBUG] transformed H164Mf.SPC -> H164MF.SPC
[Status 08:51:56 INFO] data for H164 transferred to science data processing
[Tidy 08:51:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:51:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:51:56 INFO] resetting WatchDogTimer
[Status 08:51:56 INFO] Starting Set [AERI set: name S164, 6 scans, 0 angle, D16300 command]
[Ingest 08:51:56 INFO] Sending XML status message
[Status 08:51:56 INFO] Mirror angle: 0
[Mirror 08:51:56 INFO] rotating to position S
[Status 08:51:57 INFO] .SET file for ACQ96 ready
[Ingest 08:51:57 INFO] Starting acquisition
[Status 08:51:57 INFO] reading housekeeping
[Status 08:52:15 INFO] acquire complete
[Status 08:52:16 INFO] writing housekeeping
[Sequencer 08:52:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:52:16 INFO] incremented S scene to 164 completed views
[Sequencer 08:52:16 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:52:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:52:16 INFO] incremented to [AERI set: name T164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:52:16 INFO] S164.SIG(18)
[sigmove 08:52:16 DEBUG] transformed S164Ma.SPC -> S164MA.SPC
[sigmove 08:52:16 DEBUG] transformed S164Mb.SPC -> S164MB.SPC
[sigmove 08:52:16 DEBUG] transformed S164Mc.SPC -> S164MC.SPC
[sigmove 08:52:16 DEBUG] transformed S164Md.SPC -> S164MD.SPC
[sigmove 08:52:16 DEBUG] transformed S164Me.SPC -> S164ME.SPC
[sigmove 08:52:16 DEBUG] transformed S164Mf.SPC -> S164MF.SPC
[Status 08:52:16 INFO] data for S164 transferred to science data processing
[Tidy 08:52:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:52:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:52:16 INFO] resetting WatchDogTimer
[Status 08:52:16 INFO] Starting Set [AERI set: name T164, 6 scans, 0 angle, D16300 command]
[Ingest 08:52:16 INFO] Sending XML status message
[Status 08:52:16 INFO] Mirror angle: 0
[Mirror 08:52:16 INFO] rotating to position T
[Status 08:52:17 INFO] .SET file for ACQ96 ready
[Ingest 08:52:17 INFO] Starting acquisition
[Status 08:52:17 INFO] reading housekeeping
[Status 08:52:35 INFO] acquire complete
[Status 08:52:37 INFO] writing housekeeping
[Sequencer 08:52:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:52:37 INFO] incremented T scene to 164 completed views
[Sequencer 08:52:37 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:52:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:52:37 INFO] incremented to [AERI set: name U164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:52:37 INFO] T164.SIG(18)
[sigmove 08:52:37 DEBUG] transformed T164Ma.SPC -> T164MA.SPC
[sigmove 08:52:37 DEBUG] transformed T164Mb.SPC -> T164MB.SPC
[sigmove 08:52:37 DEBUG] transformed T164Mc.SPC -> T164MC.SPC
[sigmove 08:52:37 DEBUG] transformed T164Md.SPC -> T164MD.SPC
[sigmove 08:52:37 DEBUG] transformed T164Me.SPC -> T164ME.SPC
[sigmove 08:52:37 DEBUG] transformed T164Mf.SPC -> T164MF.SPC
[Status 08:52:37 INFO] data for T164 transferred to science data processing
[Tidy 08:52:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:52:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:52:37 INFO] resetting WatchDogTimer
[Status 08:52:37 INFO] Starting Set [AERI set: name U164, 6 scans, 0 angle, D16300 command]
[Ingest 08:52:37 INFO] Sending XML status message
[Status 08:52:37 INFO] Mirror angle: 0
[Mirror 08:52:37 INFO] rotating to position U
[Status 08:52:37 INFO] .SET file for ACQ96 ready
[Ingest 08:52:38 INFO] Starting acquisition
[Status 08:52:38 INFO] reading housekeeping
[Status 08:52:56 INFO] acquire complete
[Status 08:52:56 INFO] writing housekeeping
[Sequencer 08:52:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:52:56 INFO] incremented U scene to 164 completed views
[Sequencer 08:52:56 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:52:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:52:56 INFO] incremented to [AERI set: name V164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:52:56 INFO] U164.SIG(18)
[sigmove 08:52:56 DEBUG] transformed U164Ma.SPC -> U164MA.SPC
[sigmove 08:52:56 DEBUG] transformed U164Mb.SPC -> U164MB.SPC
[sigmove 08:52:56 DEBUG] transformed U164Mc.SPC -> U164MC.SPC
[sigmove 08:52:56 DEBUG] transformed U164Md.SPC -> U164MD.SPC
[sigmove 08:52:56 DEBUG] transformed U164Me.SPC -> U164ME.SPC
[sigmove 08:52:56 DEBUG] transformed U164Mf.SPC -> U164MF.SPC
[Status 08:52:56 INFO] data for U164 transferred to science data processing
[Tidy 08:52:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:52:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:52:56 INFO] resetting WatchDogTimer
[Status 08:52:56 INFO] Starting Set [AERI set: name V164, 6 scans, 0 angle, D16300 command]
[Ingest 08:52:56 INFO] Sending XML status message
[Status 08:52:56 INFO] Mirror angle: 0
[Mirror 08:52:57 INFO] rotating to position V
[Status 08:52:57 INFO] .SET file for ACQ96 ready
[Ingest 08:52:57 INFO] Starting acquisition
[Status 08:52:57 INFO] reading housekeeping
[Status 08:53:16 INFO] acquire complete
[Status 08:53:16 INFO] writing housekeeping
[Sequencer 08:53:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:53:16 INFO] incremented V scene to 164 completed views
[Sequencer 08:53:16 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:53:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:53:16 INFO] incremented to [AERI set: name W164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:53:16 INFO] V164.SIG(18)
[sigmove 08:53:16 DEBUG] transformed V164Ma.SPC -> V164MA.SPC
[sigmove 08:53:16 DEBUG] transformed V164Mb.SPC -> V164MB.SPC
[sigmove 08:53:16 DEBUG] transformed V164Mc.SPC -> V164MC.SPC
[sigmove 08:53:16 DEBUG] transformed V164Md.SPC -> V164MD.SPC
[sigmove 08:53:16 DEBUG] transformed V164Me.SPC -> V164ME.SPC
[sigmove 08:53:16 DEBUG] transformed V164Mf.SPC -> V164MF.SPC
[Status 08:53:16 INFO] data for V164 transferred to science data processing
[Tidy 08:53:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:53:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:53:16 INFO] resetting WatchDogTimer
[Status 08:53:17 INFO] Starting Set [AERI set: name W164, 6 scans, 0 angle, D16300 command]
[Ingest 08:53:17 INFO] Sending XML status message
[Status 08:53:17 INFO] Mirror angle: 0
[Mirror 08:53:17 INFO] rotating to position W
[Status 08:53:17 INFO] .SET file for ACQ96 ready
[Ingest 08:53:17 INFO] Starting acquisition
[Status 08:53:18 INFO] reading housekeeping
[Status 08:53:36 INFO] acquire complete
[Status 08:53:37 INFO] writing housekeeping
[Sequencer 08:53:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:53:37 INFO] incremented W scene to 164 completed views
[Sequencer 08:53:37 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:53:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:53:37 INFO] incremented to [AERI set: name X164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:53:37 INFO] W164.SIG(18)
[sigmove 08:53:37 DEBUG] transformed W164Ma.SPC -> W164MA.SPC
[sigmove 08:53:37 DEBUG] transformed W164Mb.SPC -> W164MB.SPC
[sigmove 08:53:37 DEBUG] transformed W164Mc.SPC -> W164MC.SPC
[sigmove 08:53:37 DEBUG] transformed W164Md.SPC -> W164MD.SPC
[sigmove 08:53:37 DEBUG] transformed W164Me.SPC -> W164ME.SPC
[sigmove 08:53:37 DEBUG] transformed W164Mf.SPC -> W164MF.SPC
[Status 08:53:37 INFO] data for W164 transferred to science data processing
[Tidy 08:53:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:53:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:53:37 INFO] resetting WatchDogTimer
[Status 08:53:37 INFO] Starting Set [AERI set: name X164, 6 scans, 0 angle, D16300 command]
[Ingest 08:53:37 INFO] Sending XML status message
[Status 08:53:37 INFO] Mirror angle: 0
[Mirror 08:53:37 INFO] rotating to position X
[Status 08:53:37 INFO] .SET file for ACQ96 ready
[Ingest 08:53:38 INFO] Starting acquisition
[Status 08:53:38 INFO] reading housekeeping
[Status 08:53:56 INFO] acquire complete
[Status 08:53:57 INFO] writing housekeeping
[Sequencer 08:53:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:53:57 INFO] incremented X scene to 164 completed views
[Sequencer 08:53:57 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:53:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:53:57 INFO] incremented to [AERI set: name Y164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:53:57 INFO] X164.SIG(18)
[sigmove 08:53:57 DEBUG] transformed X164Ma.SPC -> X164MA.SPC
[sigmove 08:53:57 DEBUG] transformed X164Mb.SPC -> X164MB.SPC
[sigmove 08:53:57 DEBUG] transformed X164Mc.SPC -> X164MC.SPC
[sigmove 08:53:57 DEBUG] transformed X164Md.SPC -> X164MD.SPC
[sigmove 08:53:57 DEBUG] transformed X164Me.SPC -> X164ME.SPC
[sigmove 08:53:57 DEBUG] transformed X164Mf.SPC -> X164MF.SPC
[Status 08:53:57 INFO] data for X164 transferred to science data processing
[Tidy 08:53:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:53:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:53:57 INFO] resetting WatchDogTimer
[Status 08:53:57 INFO] Starting Set [AERI set: name Y164, 6 scans, 0 angle, D16300 command]
[Ingest 08:53:57 INFO] Sending XML status message
[Status 08:53:57 INFO] Mirror angle: 0
[Mirror 08:53:57 INFO] rotating to position Y
[Status 08:53:58 INFO] .SET file for ACQ96 ready
[Ingest 08:53:58 INFO] Starting acquisition
[Status 08:53:58 INFO] reading housekeeping
[Status 08:54:16 INFO] acquire complete
[Status 08:54:17 INFO] writing housekeeping
[Sequencer 08:54:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:54:17 INFO] incremented Y scene to 164 completed views
[Sequencer 08:54:17 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:54:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:54:17 INFO] incremented to [AERI set: name Z164, 6 scans, 0 angle, D16300 command] set
[sigmove 08:54:17 INFO] Y164.SIG(18)
[sigmove 08:54:17 DEBUG] transformed Y164Ma.SPC -> Y164MA.SPC
[sigmove 08:54:17 DEBUG] transformed Y164Mb.SPC -> Y164MB.SPC
[sigmove 08:54:17 DEBUG] transformed Y164Mc.SPC -> Y164MC.SPC
[sigmove 08:54:17 DEBUG] transformed Y164Md.SPC -> Y164MD.SPC
[sigmove 08:54:17 DEBUG] transformed Y164Me.SPC -> Y164ME.SPC
[sigmove 08:54:17 DEBUG] transformed Y164Mf.SPC -> Y164MF.SPC
[Status 08:54:17 INFO] data for Y164 transferred to science data processing
[Tidy 08:54:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:54:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:54:17 INFO] resetting WatchDogTimer
[Status 08:54:17 INFO] Starting Set [AERI set: name Z164, 6 scans, 0 angle, D16300 command]
[Ingest 08:54:17 INFO] Sending XML status message
[Status 08:54:17 INFO] Mirror angle: 0
[Mirror 08:54:17 INFO] rotating to position Z
[Status 08:54:18 INFO] .SET file for ACQ96 ready
[Ingest 08:54:18 INFO] Starting acquisition
[Status 08:54:18 INFO] reading housekeeping
[Status 08:54:36 INFO] acquire complete
[Status 08:54:37 INFO] writing housekeeping
[Sequencer 08:54:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:54:37 INFO] incremented Z scene to 164 completed views
[Sequencer 08:54:37 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:54:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:54:37 INFO] incremented to [AERI set: name H165, 6 scans, 60 angle, D22500 command] set
[sigmove 08:54:37 INFO] Z164.SIG(18)
[sigmove 08:54:37 DEBUG] transformed Z164Ma.SPC -> Z164MA.SPC
[sigmove 08:54:37 DEBUG] transformed Z164Mb.SPC -> Z164MB.SPC
[sigmove 08:54:37 DEBUG] transformed Z164Mc.SPC -> Z164MC.SPC
[sigmove 08:54:37 DEBUG] transformed Z164Md.SPC -> Z164MD.SPC
[sigmove 08:54:37 DEBUG] transformed Z164Me.SPC -> Z164ME.SPC
[sigmove 08:54:37 DEBUG] transformed Z164Mf.SPC -> Z164MF.SPC
[Status 08:54:37 INFO] data for Z164 transferred to science data processing
[Tidy 08:54:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:54:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:54:37 INFO] resetting WatchDogTimer
[Status 08:54:37 INFO] Starting Set [AERI set: name H165, 6 scans, 60 angle, D22500 command]
[Ingest 08:54:37 INFO] Sending XML status message
[Status 08:54:37 INFO] Mirror angle: 60
[Mirror 08:54:38 INFO] rotating to position H
[Status 08:54:38 INFO] .SET file for ACQ96 ready
[Ingest 08:54:39 INFO] Starting acquisition
[Status 08:54:39 INFO] reading housekeeping
[Status 08:54:57 INFO] acquire complete
[Status 08:54:57 INFO] writing housekeeping
[Sequencer 08:54:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:54:57 INFO] incremented H scene to 165 completed views
[Sequencer 08:54:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:54:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:54:57 INFO] incremented to [AERI set: name A165, 6 scans, 120 angle, D28300 command] set
[sigmove 08:54:57 INFO] H165.SIG(18)
[sigmove 08:54:57 DEBUG] transformed H165Ma.SPC -> H165MA.SPC
[sigmove 08:54:57 DEBUG] transformed H165Mb.SPC -> H165MB.SPC
[sigmove 08:54:57 DEBUG] transformed H165Mc.SPC -> H165MC.SPC
[sigmove 08:54:57 DEBUG] transformed H165Md.SPC -> H165MD.SPC
[sigmove 08:54:57 DEBUG] transformed H165Me.SPC -> H165ME.SPC
[sigmove 08:54:57 DEBUG] transformed H165Mf.SPC -> H165MF.SPC
[Status 08:54:57 INFO] data for H165 transferred to science data processing
[Tidy 08:54:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:54:57 INFO] A163.FIN(19),H163.FIN(19),S163.FIN(19),T163.FIN(19),U163.FIN(19),V163.FIN(19),W163.FIN(19),X163.FIN(19),Y163.FIN(19),Z163.FIN(19),A164.FIN(19),H164.FIN(19),S164.FIN(19),T164.FIN(19),U164.FIN(19),V164.FIN(19),W164.FIN(19),X164.FIN(19),Y164.FIN(19),Z164.FIN(19)
[sigmove 08:54:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:54:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 08:55:00 DEBUG] done zipping
[WatchDog 08:55:00 INFO] resetting WatchDogTimer
[Status 08:55:01 INFO] Starting Set [AERI set: name A165, 6 scans, 120 angle, D28300 command]
[Ingest 08:55:01 INFO] Sending XML status message
[Status 08:55:01 INFO] Mirror angle: 120
[Mirror 08:55:01 INFO] rotating to position A
[Status 08:55:02 INFO] .SET file for ACQ96 ready
[Ingest 08:55:02 INFO] Starting acquisition
[Status 08:55:02 INFO] reading housekeeping
[Status 08:55:20 INFO] acquire complete
[Status 08:55:21 INFO] writing housekeeping
[Sequencer 08:55:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:55:21 INFO] incremented A scene to 165 completed views
[Sequencer 08:55:21 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:55:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:55:21 INFO] incremented to [AERI set: name S165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:55:21 INFO] A165.SIG(18)
[sigmove 08:55:21 DEBUG] transformed A165Ma.SPC -> A165MA.SPC
[sigmove 08:55:21 DEBUG] transformed A165Mb.SPC -> A165MB.SPC
[sigmove 08:55:21 DEBUG] transformed A165Mc.SPC -> A165MC.SPC
[sigmove 08:55:21 DEBUG] transformed A165Md.SPC -> A165MD.SPC
[sigmove 08:55:21 DEBUG] transformed A165Me.SPC -> A165ME.SPC
[sigmove 08:55:21 DEBUG] transformed A165Mf.SPC -> A165MF.SPC
[Status 08:55:21 INFO] data for A165 transferred to science data processing
[Tidy 08:55:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:55:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:55:21 INFO] resetting WatchDogTimer
[Status 08:55:21 INFO] Starting Set [AERI set: name S165, 6 scans, 0 angle, D16300 command]
[Ingest 08:55:21 INFO] Sending XML status message
[Status 08:55:21 INFO] Mirror angle: 0
[Mirror 08:55:21 INFO] rotating to position S
[Status 08:55:23 INFO] .SET file for ACQ96 ready
[Ingest 08:55:23 INFO] Starting acquisition
[Status 08:55:23 INFO] reading housekeeping
[Status 08:55:40 INFO] acquire complete
[Status 08:55:41 INFO] writing housekeeping
[Sequencer 08:55:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:55:41 INFO] incremented S scene to 165 completed views
[Sequencer 08:55:41 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:55:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:55:41 INFO] incremented to [AERI set: name T165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:55:41 INFO] S165.SIG(18)
[sigmove 08:55:41 DEBUG] transformed S165Ma.SPC -> S165MA.SPC
[sigmove 08:55:41 DEBUG] transformed S165Mb.SPC -> S165MB.SPC
[sigmove 08:55:41 DEBUG] transformed S165Mc.SPC -> S165MC.SPC
[sigmove 08:55:41 DEBUG] transformed S165Md.SPC -> S165MD.SPC
[sigmove 08:55:41 DEBUG] transformed S165Me.SPC -> S165ME.SPC
[sigmove 08:55:41 DEBUG] transformed S165Mf.SPC -> S165MF.SPC
[Status 08:55:41 INFO] data for S165 transferred to science data processing
[Tidy 08:55:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:55:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:55:41 INFO] resetting WatchDogTimer
[Status 08:55:41 INFO] Starting Set [AERI set: name T165, 6 scans, 0 angle, D16300 command]
[Ingest 08:55:41 INFO] Sending XML status message
[Status 08:55:41 INFO] Mirror angle: 0
[Mirror 08:55:42 INFO] rotating to position T
[Status 08:55:42 INFO] .SET file for ACQ96 ready
[Ingest 08:55:42 INFO] Starting acquisition
[Status 08:55:42 INFO] reading housekeeping
[Status 08:56:01 INFO] acquire complete
[Status 08:56:01 INFO] writing housekeeping
[Sequencer 08:56:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:56:01 INFO] incremented T scene to 165 completed views
[Sequencer 08:56:01 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:56:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:56:01 INFO] incremented to [AERI set: name U165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:56:01 INFO] T165.SIG(18)
[sigmove 08:56:01 DEBUG] transformed T165Ma.SPC -> T165MA.SPC
[sigmove 08:56:01 DEBUG] transformed T165Mb.SPC -> T165MB.SPC
[sigmove 08:56:01 DEBUG] transformed T165Mc.SPC -> T165MC.SPC
[sigmove 08:56:01 DEBUG] transformed T165Md.SPC -> T165MD.SPC
[sigmove 08:56:01 DEBUG] transformed T165Me.SPC -> T165ME.SPC
[sigmove 08:56:01 DEBUG] transformed T165Mf.SPC -> T165MF.SPC
[Status 08:56:01 INFO] data for T165 transferred to science data processing
[Tidy 08:56:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:56:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:56:01 INFO] resetting WatchDogTimer
[Status 08:56:01 INFO] Starting Set [AERI set: name U165, 6 scans, 0 angle, D16300 command]
[Ingest 08:56:01 INFO] Sending XML status message
[Status 08:56:01 INFO] Mirror angle: 0
[Mirror 08:56:02 INFO] rotating to position U
[Status 08:56:02 INFO] .SET file for ACQ96 ready
[Ingest 08:56:02 INFO] Starting acquisition
[Status 08:56:02 INFO] reading housekeeping
[Status 08:56:21 INFO] acquire complete
[Status 08:56:21 INFO] writing housekeeping
[Sequencer 08:56:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:56:21 INFO] incremented U scene to 165 completed views
[Sequencer 08:56:21 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:56:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:56:21 INFO] incremented to [AERI set: name V165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:56:21 INFO] U165.SIG(18)
[sigmove 08:56:21 DEBUG] transformed U165Ma.SPC -> U165MA.SPC
[sigmove 08:56:21 DEBUG] transformed U165Mb.SPC -> U165MB.SPC
[sigmove 08:56:21 DEBUG] transformed U165Mc.SPC -> U165MC.SPC
[sigmove 08:56:21 DEBUG] transformed U165Md.SPC -> U165MD.SPC
[sigmove 08:56:21 DEBUG] transformed U165Me.SPC -> U165ME.SPC
[sigmove 08:56:21 DEBUG] transformed U165Mf.SPC -> U165MF.SPC
[Status 08:56:21 INFO] data for U165 transferred to science data processing
[Tidy 08:56:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:56:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:56:21 INFO] resetting WatchDogTimer
[Status 08:56:22 INFO] Starting Set [AERI set: name V165, 6 scans, 0 angle, D16300 command]
[Ingest 08:56:22 INFO] Sending XML status message
[Status 08:56:22 INFO] Mirror angle: 0
[Mirror 08:56:22 INFO] rotating to position V
[Status 08:56:22 INFO] .SET file for ACQ96 ready
[Ingest 08:56:22 INFO] Starting acquisition
[Status 08:56:23 INFO] reading housekeeping
[Status 08:56:41 INFO] acquire complete
[Status 08:56:42 INFO] writing housekeeping
[Sequencer 08:56:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:56:42 INFO] incremented V scene to 165 completed views
[Sequencer 08:56:42 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:56:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:56:42 INFO] incremented to [AERI set: name W165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:56:42 INFO] V165.SIG(18)
[sigmove 08:56:42 DEBUG] transformed V165Ma.SPC -> V165MA.SPC
[sigmove 08:56:42 DEBUG] transformed V165Mb.SPC -> V165MB.SPC
[sigmove 08:56:42 DEBUG] transformed V165Mc.SPC -> V165MC.SPC
[sigmove 08:56:42 DEBUG] transformed V165Md.SPC -> V165MD.SPC
[sigmove 08:56:42 DEBUG] transformed V165Me.SPC -> V165ME.SPC
[sigmove 08:56:42 DEBUG] transformed V165Mf.SPC -> V165MF.SPC
[Status 08:56:42 INFO] data for V165 transferred to science data processing
[Tidy 08:56:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:56:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:56:42 INFO] resetting WatchDogTimer
[Status 08:56:42 INFO] Starting Set [AERI set: name W165, 6 scans, 0 angle, D16300 command]
[Ingest 08:56:42 INFO] Sending XML status message
[Status 08:56:42 INFO] Mirror angle: 0
[Mirror 08:56:42 INFO] rotating to position W
[Status 08:56:42 INFO] .SET file for ACQ96 ready
[Ingest 08:56:43 INFO] Starting acquisition
[Status 08:56:43 INFO] reading housekeeping
[Status 08:57:01 INFO] acquire complete
[Status 08:57:02 INFO] writing housekeeping
[Sequencer 08:57:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:57:02 INFO] incremented W scene to 165 completed views
[Sequencer 08:57:02 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:57:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:57:02 INFO] incremented to [AERI set: name X165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:57:02 INFO] W165.SIG(18)
[sigmove 08:57:02 DEBUG] transformed W165Ma.SPC -> W165MA.SPC
[sigmove 08:57:02 DEBUG] transformed W165Mb.SPC -> W165MB.SPC
[sigmove 08:57:02 DEBUG] transformed W165Mc.SPC -> W165MC.SPC
[sigmove 08:57:02 DEBUG] transformed W165Md.SPC -> W165MD.SPC
[sigmove 08:57:02 DEBUG] transformed W165Me.SPC -> W165ME.SPC
[sigmove 08:57:02 DEBUG] transformed W165Mf.SPC -> W165MF.SPC
[Status 08:57:02 INFO] data for W165 transferred to science data processing
[Tidy 08:57:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:57:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:57:02 INFO] resetting WatchDogTimer
[Status 08:57:02 INFO] Starting Set [AERI set: name X165, 6 scans, 0 angle, D16300 command]
[Ingest 08:57:02 INFO] Sending XML status message
[Status 08:57:02 INFO] Mirror angle: 0
[Mirror 08:57:02 INFO] rotating to position X
[Status 08:57:03 INFO] .SET file for ACQ96 ready
[Ingest 08:57:03 INFO] Starting acquisition
[Status 08:57:03 INFO] reading housekeeping
[Status 08:57:21 INFO] acquire complete
[Status 08:57:22 INFO] writing housekeeping
[Sequencer 08:57:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:57:22 INFO] incremented X scene to 165 completed views
[Sequencer 08:57:22 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:57:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:57:22 INFO] incremented to [AERI set: name Y165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:57:22 INFO] X165.SIG(18)
[sigmove 08:57:22 DEBUG] transformed X165Ma.SPC -> X165MA.SPC
[sigmove 08:57:22 DEBUG] transformed X165Mb.SPC -> X165MB.SPC
[sigmove 08:57:22 DEBUG] transformed X165Mc.SPC -> X165MC.SPC
[sigmove 08:57:22 DEBUG] transformed X165Md.SPC -> X165MD.SPC
[sigmove 08:57:22 DEBUG] transformed X165Me.SPC -> X165ME.SPC
[sigmove 08:57:22 DEBUG] transformed X165Mf.SPC -> X165MF.SPC
[Status 08:57:22 INFO] data for X165 transferred to science data processing
[Tidy 08:57:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:57:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:57:22 INFO] resetting WatchDogTimer
[Status 08:57:22 INFO] Starting Set [AERI set: name Y165, 6 scans, 0 angle, D16300 command]
[Ingest 08:57:22 INFO] Sending XML status message
[Status 08:57:22 INFO] Mirror angle: 0
[Mirror 08:57:22 INFO] rotating to position Y
[Status 08:57:23 INFO] .SET file for ACQ96 ready
[Ingest 08:57:23 INFO] Starting acquisition
[Status 08:57:23 INFO] reading housekeeping
[Status 08:57:41 INFO] acquire complete
[Status 08:57:42 INFO] writing housekeeping
[Sequencer 08:57:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:57:42 INFO] incremented Y scene to 165 completed views
[Sequencer 08:57:42 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:57:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:57:42 INFO] incremented to [AERI set: name Z165, 6 scans, 0 angle, D16300 command] set
[sigmove 08:57:42 INFO] Y165.SIG(18)
[sigmove 08:57:42 DEBUG] transformed Y165Ma.SPC -> Y165MA.SPC
[sigmove 08:57:42 DEBUG] transformed Y165Mb.SPC -> Y165MB.SPC
[sigmove 08:57:42 DEBUG] transformed Y165Mc.SPC -> Y165MC.SPC
[sigmove 08:57:42 DEBUG] transformed Y165Md.SPC -> Y165MD.SPC
[sigmove 08:57:42 DEBUG] transformed Y165Me.SPC -> Y165ME.SPC
[sigmove 08:57:42 DEBUG] transformed Y165Mf.SPC -> Y165MF.SPC
[Status 08:57:42 INFO] data for Y165 transferred to science data processing
[Tidy 08:57:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:57:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:57:42 INFO] resetting WatchDogTimer
[Status 08:57:42 INFO] Starting Set [AERI set: name Z165, 6 scans, 0 angle, D16300 command]
[Ingest 08:57:42 INFO] Sending XML status message
[Status 08:57:42 INFO] Mirror angle: 0
[Mirror 08:57:43 INFO] rotating to position Z
[Status 08:57:43 INFO] .SET file for ACQ96 ready
[Ingest 08:57:43 INFO] Starting acquisition
[Status 08:57:43 INFO] reading housekeeping
[Status 08:58:02 INFO] acquire complete
[Status 08:58:02 INFO] writing housekeeping
[Sequencer 08:58:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:58:02 INFO] incremented Z scene to 165 completed views
[Sequencer 08:58:02 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 08:58:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:58:02 INFO] incremented to [AERI set: name A166, 6 scans, 120 angle, D28300 command] set
[sigmove 08:58:02 INFO] Z165.SIG(18)
[sigmove 08:58:02 DEBUG] transformed Z165Ma.SPC -> Z165MA.SPC
[sigmove 08:58:02 DEBUG] transformed Z165Mb.SPC -> Z165MB.SPC
[sigmove 08:58:02 DEBUG] transformed Z165Mc.SPC -> Z165MC.SPC
[sigmove 08:58:02 DEBUG] transformed Z165Md.SPC -> Z165MD.SPC
[sigmove 08:58:02 DEBUG] transformed Z165Me.SPC -> Z165ME.SPC
[sigmove 08:58:02 DEBUG] transformed Z165Mf.SPC -> Z165MF.SPC
[Status 08:58:02 INFO] data for Z165 transferred to science data processing
[Tidy 08:58:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:58:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:58:02 INFO] resetting WatchDogTimer
[Status 08:58:03 INFO] Starting Set [AERI set: name A166, 6 scans, 120 angle, D28300 command]
[Ingest 08:58:03 INFO] Sending XML status message
[Status 08:58:03 INFO] Mirror angle: 120
[Mirror 08:58:03 INFO] rotating to position A
[Status 08:58:04 INFO] .SET file for ACQ96 ready
[Ingest 08:58:04 INFO] Starting acquisition
[Status 08:58:05 INFO] reading housekeeping
[Status 08:58:22 INFO] acquire complete
[Status 08:58:22 INFO] writing housekeeping
[Sequencer 08:58:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:58:22 INFO] incremented A scene to 166 completed views
[Sequencer 08:58:22 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 08:58:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:58:22 INFO] incremented to [AERI set: name H166, 6 scans, 60 angle, D22500 command] set
[sigmove 08:58:22 INFO] A166.SIG(18)
[sigmove 08:58:23 DEBUG] transformed A166Ma.SPC -> A166MA.SPC
[sigmove 08:58:23 DEBUG] transformed A166Mb.SPC -> A166MB.SPC
[sigmove 08:58:23 DEBUG] transformed A166Mc.SPC -> A166MC.SPC
[sigmove 08:58:23 DEBUG] transformed A166Md.SPC -> A166MD.SPC
[sigmove 08:58:23 DEBUG] transformed A166Me.SPC -> A166ME.SPC
[sigmove 08:58:23 DEBUG] transformed A166Mf.SPC -> A166MF.SPC
[Status 08:58:23 INFO] data for A166 transferred to science data processing
[Tidy 08:58:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:58:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:58:23 INFO] resetting WatchDogTimer
[Status 08:58:23 INFO] Starting Set [AERI set: name H166, 6 scans, 60 angle, D22500 command]
[Ingest 08:58:23 INFO] Sending XML status message
[Status 08:58:23 INFO] Mirror angle: 60
[Mirror 08:58:23 INFO] rotating to position H
[Status 08:58:24 INFO] .SET file for ACQ96 ready
[Ingest 08:58:24 INFO] Starting acquisition
[Status 08:58:24 INFO] reading housekeeping
[Status 08:58:42 INFO] acquire complete
[Status 08:58:43 INFO] writing housekeeping
[Sequencer 08:58:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:58:43 INFO] incremented H scene to 166 completed views
[Sequencer 08:58:43 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 08:58:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:58:43 INFO] incremented to [AERI set: name S166, 6 scans, 0 angle, D16300 command] set
[sigmove 08:58:43 INFO] H166.SIG(18)
[sigmove 08:58:43 DEBUG] transformed H166Ma.SPC -> H166MA.SPC
[sigmove 08:58:43 DEBUG] transformed H166Mb.SPC -> H166MB.SPC
[sigmove 08:58:43 DEBUG] transformed H166Mc.SPC -> H166MC.SPC
[sigmove 08:58:43 DEBUG] transformed H166Md.SPC -> H166MD.SPC
[sigmove 08:58:43 DEBUG] transformed H166Me.SPC -> H166ME.SPC
[sigmove 08:58:43 DEBUG] transformed H166Mf.SPC -> H166MF.SPC
[Status 08:58:43 INFO] data for H166 transferred to science data processing
[Tidy 08:58:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:58:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:58:43 INFO] resetting WatchDogTimer
[Status 08:58:43 INFO] Starting Set [AERI set: name S166, 6 scans, 0 angle, D16300 command]
[Ingest 08:58:43 INFO] Sending XML status message
[Status 08:58:43 INFO] Mirror angle: 0
[Mirror 08:58:43 INFO] rotating to position S
[Status 08:58:44 INFO] .SET file for ACQ96 ready
[Ingest 08:58:44 INFO] Starting acquisition
[Status 08:58:44 INFO] reading housekeeping
[Status 08:59:02 INFO] acquire complete
[Status 08:59:03 INFO] writing housekeeping
[Sequencer 08:59:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:59:03 INFO] incremented S scene to 166 completed views
[Sequencer 08:59:03 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:59:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:59:03 INFO] incremented to [AERI set: name T166, 6 scans, 0 angle, D16300 command] set
[sigmove 08:59:03 INFO] S166.SIG(18)
[sigmove 08:59:03 DEBUG] transformed S166Ma.SPC -> S166MA.SPC
[sigmove 08:59:03 DEBUG] transformed S166Mb.SPC -> S166MB.SPC
[sigmove 08:59:03 DEBUG] transformed S166Mc.SPC -> S166MC.SPC
[sigmove 08:59:03 DEBUG] transformed S166Md.SPC -> S166MD.SPC
[sigmove 08:59:03 DEBUG] transformed S166Me.SPC -> S166ME.SPC
[sigmove 08:59:03 DEBUG] transformed S166Mf.SPC -> S166MF.SPC
[Status 08:59:03 INFO] data for S166 transferred to science data processing
[Tidy 08:59:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:59:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:59:03 INFO] resetting WatchDogTimer
[Status 08:59:03 INFO] Starting Set [AERI set: name T166, 6 scans, 0 angle, D16300 command]
[Ingest 08:59:03 INFO] Sending XML status message
[Status 08:59:03 INFO] Mirror angle: 0
[Mirror 08:59:03 INFO] rotating to position T
[Status 08:59:04 INFO] .SET file for ACQ96 ready
[Ingest 08:59:04 INFO] Starting acquisition
[Status 08:59:04 INFO] reading housekeeping
[Status 08:59:22 INFO] acquire complete
[Status 08:59:23 INFO] writing housekeeping
[Sequencer 08:59:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:59:23 INFO] incremented T scene to 166 completed views
[Sequencer 08:59:23 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:59:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:59:23 INFO] incremented to [AERI set: name U166, 6 scans, 0 angle, D16300 command] set
[sigmove 08:59:23 INFO] T166.SIG(18)
[sigmove 08:59:23 DEBUG] transformed T166Ma.SPC -> T166MA.SPC
[sigmove 08:59:23 DEBUG] transformed T166Mb.SPC -> T166MB.SPC
[sigmove 08:59:23 DEBUG] transformed T166Mc.SPC -> T166MC.SPC
[sigmove 08:59:23 DEBUG] transformed T166Md.SPC -> T166MD.SPC
[sigmove 08:59:23 DEBUG] transformed T166Me.SPC -> T166ME.SPC
[sigmove 08:59:23 DEBUG] transformed T166Mf.SPC -> T166MF.SPC
[Status 08:59:23 INFO] data for T166 transferred to science data processing
[Tidy 08:59:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:59:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:59:23 INFO] resetting WatchDogTimer
[Status 08:59:23 INFO] Starting Set [AERI set: name U166, 6 scans, 0 angle, D16300 command]
[Ingest 08:59:23 INFO] Sending XML status message
[Status 08:59:23 INFO] Mirror angle: 0
[Mirror 08:59:24 INFO] rotating to position U
[Status 08:59:24 INFO] .SET file for ACQ96 ready
[Ingest 08:59:24 INFO] Starting acquisition
[Status 08:59:25 INFO] reading housekeeping
[Status 08:59:43 INFO] acquire complete
[Status 08:59:43 INFO] writing housekeeping
[Sequencer 08:59:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 08:59:43 INFO] incremented U scene to 166 completed views
[Sequencer 08:59:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 08:59:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 08:59:43 INFO] incremented to [AERI set: name V166, 6 scans, 0 angle, D16300 command] set
[sigmove 08:59:43 INFO] U166.SIG(18)
[sigmove 08:59:43 DEBUG] transformed U166Ma.SPC -> U166MA.SPC
[sigmove 08:59:43 DEBUG] transformed U166Mb.SPC -> U166MB.SPC
[sigmove 08:59:43 DEBUG] transformed U166Mc.SPC -> U166MC.SPC
[sigmove 08:59:43 DEBUG] transformed U166Md.SPC -> U166MD.SPC
[sigmove 08:59:43 DEBUG] transformed U166Me.SPC -> U166ME.SPC
[sigmove 08:59:43 DEBUG] transformed U166Mf.SPC -> U166MF.SPC
[Status 08:59:43 INFO] data for U166 transferred to science data processing
[Tidy 08:59:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 08:59:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 08:59:43 INFO] resetting WatchDogTimer
[Status 08:59:44 INFO] Starting Set [AERI set: name V166, 6 scans, 0 angle, D16300 command]
[Ingest 08:59:44 INFO] Sending XML status message
[Status 08:59:44 INFO] Mirror angle: 0
[Mirror 08:59:44 INFO] rotating to position V
[Status 08:59:44 INFO] .SET file for ACQ96 ready
[Ingest 08:59:44 INFO] Starting acquisition
[Status 08:59:45 INFO] reading housekeeping
[Status 09:00:03 INFO] acquire complete
[Status 09:00:03 INFO] writing housekeeping
[Sequencer 09:00:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:00:03 INFO] incremented V scene to 166 completed views
[Sequencer 09:00:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:00:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:00:03 INFO] incremented to [AERI set: name W166, 6 scans, 0 angle, D16300 command] set
[sigmove 09:00:03 INFO] V166.SIG(18)
[sigmove 09:00:03 DEBUG] transformed V166Ma.SPC -> V166MA.SPC
[sigmove 09:00:03 DEBUG] transformed V166Mb.SPC -> V166MB.SPC
[sigmove 09:00:03 DEBUG] transformed V166Mc.SPC -> V166MC.SPC
[sigmove 09:00:03 DEBUG] transformed V166Md.SPC -> V166MD.SPC
[sigmove 09:00:03 DEBUG] transformed V166Me.SPC -> V166ME.SPC
[sigmove 09:00:03 DEBUG] transformed V166Mf.SPC -> V166MF.SPC
[Status 09:00:03 INFO] data for V166 transferred to science data processing
[Tidy 09:00:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:00:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:00:03 INFO] resetting WatchDogTimer
[Status 09:00:04 INFO] Starting Set [AERI set: name W166, 6 scans, 0 angle, D16300 command]
[Ingest 09:00:04 INFO] Sending XML status message
[Status 09:00:04 INFO] Mirror angle: 0
[Mirror 09:00:04 INFO] rotating to position W
[Status 09:00:04 INFO] .SET file for ACQ96 ready
[Ingest 09:00:04 INFO] Starting acquisition
[Status 09:00:05 INFO] reading housekeeping
[Status 09:00:23 INFO] acquire complete
[Status 09:00:24 INFO] writing housekeeping
[Sequencer 09:00:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:00:24 INFO] incremented W scene to 166 completed views
[Sequencer 09:00:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:00:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:00:24 INFO] incremented to [AERI set: name X166, 6 scans, 0 angle, D16300 command] set
[sigmove 09:00:24 INFO] W166.SIG(18)
[sigmove 09:00:24 DEBUG] transformed W166Ma.SPC -> W166MA.SPC
[sigmove 09:00:24 DEBUG] transformed W166Mb.SPC -> W166MB.SPC
[sigmove 09:00:24 DEBUG] transformed W166Mc.SPC -> W166MC.SPC
[sigmove 09:00:24 DEBUG] transformed W166Md.SPC -> W166MD.SPC
[sigmove 09:00:24 DEBUG] transformed W166Me.SPC -> W166ME.SPC
[sigmove 09:00:24 DEBUG] transformed W166Mf.SPC -> W166MF.SPC
[Status 09:00:24 INFO] data for W166 transferred to science data processing
[Tidy 09:00:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:00:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:00:24 INFO] resetting WatchDogTimer
[Status 09:00:24 INFO] Starting Set [AERI set: name X166, 6 scans, 0 angle, D16300 command]
[Ingest 09:00:24 INFO] Sending XML status message
[Status 09:00:24 INFO] Mirror angle: 0
[Mirror 09:00:24 INFO] rotating to position X
[Status 09:00:25 INFO] .SET file for ACQ96 ready
[Ingest 09:00:25 INFO] Starting acquisition
[Status 09:00:25 INFO] reading housekeeping
[Status 09:00:43 INFO] acquire complete
[Status 09:00:44 INFO] writing housekeeping
[Sequencer 09:00:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:00:44 INFO] incremented X scene to 166 completed views
[Sequencer 09:00:44 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:00:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:00:44 INFO] incremented to [AERI set: name Y166, 6 scans, 0 angle, D16300 command] set
[sigmove 09:00:44 INFO] X166.SIG(18)
[sigmove 09:00:44 DEBUG] transformed X166Ma.SPC -> X166MA.SPC
[sigmove 09:00:44 DEBUG] transformed X166Mb.SPC -> X166MB.SPC
[sigmove 09:00:44 DEBUG] transformed X166Mc.SPC -> X166MC.SPC
[sigmove 09:00:44 DEBUG] transformed X166Md.SPC -> X166MD.SPC
[sigmove 09:00:44 DEBUG] transformed X166Me.SPC -> X166ME.SPC
[sigmove 09:00:44 DEBUG] transformed X166Mf.SPC -> X166MF.SPC
[Status 09:00:44 INFO] data for X166 transferred to science data processing
[Tidy 09:00:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:00:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:00:44 INFO] resetting WatchDogTimer
[Status 09:00:44 INFO] Starting Set [AERI set: name Y166, 6 scans, 0 angle, D16300 command]
[Ingest 09:00:44 INFO] Sending XML status message
[Status 09:00:44 INFO] Mirror angle: 0
[Mirror 09:00:44 INFO] rotating to position Y
[Status 09:00:45 INFO] .SET file for ACQ96 ready
[Ingest 09:00:45 INFO] Starting acquisition
[Status 09:00:45 INFO] reading housekeeping
[Status 09:01:03 INFO] acquire complete
[Status 09:01:04 INFO] writing housekeeping
[Sequencer 09:01:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:01:04 INFO] incremented Y scene to 166 completed views
[Sequencer 09:01:04 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:01:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:01:04 INFO] incremented to [AERI set: name Z166, 6 scans, 0 angle, D16300 command] set
[sigmove 09:01:04 INFO] Y166.SIG(18)
[sigmove 09:01:04 DEBUG] transformed Y166Ma.SPC -> Y166MA.SPC
[sigmove 09:01:04 DEBUG] transformed Y166Mb.SPC -> Y166MB.SPC
[sigmove 09:01:04 DEBUG] transformed Y166Mc.SPC -> Y166MC.SPC
[sigmove 09:01:04 DEBUG] transformed Y166Md.SPC -> Y166MD.SPC
[sigmove 09:01:04 DEBUG] transformed Y166Me.SPC -> Y166ME.SPC
[sigmove 09:01:04 DEBUG] transformed Y166Mf.SPC -> Y166MF.SPC
[Status 09:01:04 INFO] data for Y166 transferred to science data processing
[Tidy 09:01:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:01:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:01:04 INFO] resetting WatchDogTimer
[Status 09:01:04 INFO] Starting Set [AERI set: name Z166, 6 scans, 0 angle, D16300 command]
[Ingest 09:01:04 INFO] Sending XML status message
[Status 09:01:04 INFO] Mirror angle: 0
[Mirror 09:01:05 INFO] rotating to position Z
[Status 09:01:05 INFO] .SET file for ACQ96 ready
[Ingest 09:01:05 INFO] Starting acquisition
[Status 09:01:05 INFO] reading housekeeping
[Status 09:01:24 INFO] acquire complete
[Status 09:01:24 INFO] writing housekeeping
[Sequencer 09:01:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:01:24 INFO] incremented Z scene to 166 completed views
[Sequencer 09:01:24 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:01:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:01:24 INFO] incremented to [AERI set: name H167, 6 scans, 60 angle, D22500 command] set
[sigmove 09:01:24 INFO] Z166.SIG(18)
[sigmove 09:01:24 DEBUG] transformed Z166Ma.SPC -> Z166MA.SPC
[sigmove 09:01:24 DEBUG] transformed Z166Mb.SPC -> Z166MB.SPC
[sigmove 09:01:24 DEBUG] transformed Z166Mc.SPC -> Z166MC.SPC
[sigmove 09:01:24 DEBUG] transformed Z166Md.SPC -> Z166MD.SPC
[sigmove 09:01:24 DEBUG] transformed Z166Me.SPC -> Z166ME.SPC
[sigmove 09:01:24 DEBUG] transformed Z166Mf.SPC -> Z166MF.SPC
[Status 09:01:24 INFO] data for Z166 transferred to science data processing
[Tidy 09:01:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:01:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:01:24 INFO] resetting WatchDogTimer
[Status 09:01:24 INFO] Starting Set [AERI set: name H167, 6 scans, 60 angle, D22500 command]
[Ingest 09:01:24 INFO] Sending XML status message
[Status 09:01:24 INFO] Mirror angle: 60
[Mirror 09:01:25 INFO] rotating to position H
[Status 09:01:26 INFO] .SET file for ACQ96 ready
[Ingest 09:01:26 INFO] Starting acquisition
[Status 09:01:26 INFO] reading housekeeping
[Status 09:01:44 INFO] acquire complete
[Status 09:01:44 INFO] writing housekeeping
[Sequencer 09:01:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:01:44 INFO] incremented H scene to 167 completed views
[Sequencer 09:01:44 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:01:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:01:44 INFO] incremented to [AERI set: name A167, 6 scans, 120 angle, D28300 command] set
[sigmove 09:01:44 INFO] H167.SIG(18)
[sigmove 09:01:44 DEBUG] transformed H167Ma.SPC -> H167MA.SPC
[sigmove 09:01:44 DEBUG] transformed H167Mb.SPC -> H167MB.SPC
[sigmove 09:01:44 DEBUG] transformed H167Mc.SPC -> H167MC.SPC
[sigmove 09:01:44 DEBUG] transformed H167Md.SPC -> H167MD.SPC
[sigmove 09:01:44 DEBUG] transformed H167Me.SPC -> H167ME.SPC
[sigmove 09:01:44 DEBUG] transformed H167Mf.SPC -> H167MF.SPC
[Status 09:01:44 INFO] data for H167 transferred to science data processing
[Tidy 09:01:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:01:45 INFO] A165.FIN(19),H165.FIN(19),S165.FIN(19),T165.FIN(19),U165.FIN(19),V165.FIN(19),W165.FIN(19),X165.FIN(19),Y165.FIN(19),Z165.FIN(19),A166.FIN(19),H166.FIN(19),S166.FIN(19),T166.FIN(19),U166.FIN(19),V166.FIN(19),W166.FIN(19),X166.FIN(19),Y166.FIN(19),Z166.FIN(19)
[sigmove 09:01:45 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:01:45 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:01:47 DEBUG] done zipping
[WatchDog 09:01:48 INFO] resetting WatchDogTimer
[Status 09:01:48 INFO] Starting Set [AERI set: name A167, 6 scans, 120 angle, D28300 command]
[Ingest 09:01:48 INFO] Sending XML status message
[Status 09:01:48 INFO] Mirror angle: 120
[Mirror 09:01:48 INFO] rotating to position A
[Status 09:01:49 INFO] .SET file for ACQ96 ready
[Ingest 09:01:49 INFO] Starting acquisition
[Status 09:01:49 INFO] reading housekeeping
[Status 09:02:07 INFO] acquire complete
[Status 09:02:08 INFO] writing housekeeping
[Sequencer 09:02:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:02:08 INFO] incremented A scene to 167 completed views
[Sequencer 09:02:08 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:02:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:02:08 INFO] incremented to [AERI set: name S167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:02:08 INFO] A167.SIG(18)
[sigmove 09:02:08 DEBUG] transformed A167Ma.SPC -> A167MA.SPC
[sigmove 09:02:08 DEBUG] transformed A167Mb.SPC -> A167MB.SPC
[sigmove 09:02:08 DEBUG] transformed A167Mc.SPC -> A167MC.SPC
[sigmove 09:02:08 DEBUG] transformed A167Md.SPC -> A167MD.SPC
[sigmove 09:02:08 DEBUG] transformed A167Me.SPC -> A167ME.SPC
[sigmove 09:02:08 DEBUG] transformed A167Mf.SPC -> A167MF.SPC
[Status 09:02:08 INFO] data for A167 transferred to science data processing
[Tidy 09:02:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:02:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:02:08 INFO] resetting WatchDogTimer
[Status 09:02:08 INFO] Starting Set [AERI set: name S167, 6 scans, 0 angle, D16300 command]
[Ingest 09:02:08 INFO] Sending XML status message
[Status 09:02:08 INFO] Mirror angle: 0
[Mirror 09:02:08 INFO] rotating to position S
[Status 09:02:10 INFO] .SET file for ACQ96 ready
[Ingest 09:02:10 INFO] Starting acquisition
[Status 09:02:10 INFO] reading housekeeping
[Status 09:02:28 INFO] acquire complete
[Status 09:02:28 INFO] writing housekeeping
[Sequencer 09:02:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:02:28 INFO] incremented S scene to 167 completed views
[Sequencer 09:02:28 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:02:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:02:28 INFO] incremented to [AERI set: name T167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:02:28 INFO] S167.SIG(18)
[sigmove 09:02:28 DEBUG] transformed S167Ma.SPC -> S167MA.SPC
[sigmove 09:02:28 DEBUG] transformed S167Mb.SPC -> S167MB.SPC
[sigmove 09:02:28 DEBUG] transformed S167Mc.SPC -> S167MC.SPC
[sigmove 09:02:28 DEBUG] transformed S167Md.SPC -> S167MD.SPC
[sigmove 09:02:28 DEBUG] transformed S167Me.SPC -> S167ME.SPC
[sigmove 09:02:28 DEBUG] transformed S167Mf.SPC -> S167MF.SPC
[Status 09:02:28 INFO] data for S167 transferred to science data processing
[Tidy 09:02:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:02:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:02:28 INFO] resetting WatchDogTimer
[Status 09:02:28 INFO] Starting Set [AERI set: name T167, 6 scans, 0 angle, D16300 command]
[Ingest 09:02:28 INFO] Sending XML status message
[Status 09:02:28 INFO] Mirror angle: 0
[Mirror 09:02:29 INFO] rotating to position T
[Status 09:02:29 INFO] .SET file for ACQ96 ready
[Ingest 09:02:29 INFO] Starting acquisition
[Status 09:02:29 INFO] reading housekeeping
[Status 09:02:48 INFO] acquire complete
[Status 09:02:48 INFO] writing housekeeping
[Sequencer 09:02:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:02:48 INFO] incremented T scene to 167 completed views
[Sequencer 09:02:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:02:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:02:48 INFO] incremented to [AERI set: name U167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:02:48 INFO] T167.SIG(18)
[sigmove 09:02:48 DEBUG] transformed T167Ma.SPC -> T167MA.SPC
[sigmove 09:02:48 DEBUG] transformed T167Mb.SPC -> T167MB.SPC
[sigmove 09:02:48 DEBUG] transformed T167Mc.SPC -> T167MC.SPC
[sigmove 09:02:48 DEBUG] transformed T167Md.SPC -> T167MD.SPC
[sigmove 09:02:48 DEBUG] transformed T167Me.SPC -> T167ME.SPC
[sigmove 09:02:48 DEBUG] transformed T167Mf.SPC -> T167MF.SPC
[Status 09:02:48 INFO] data for T167 transferred to science data processing
[Tidy 09:02:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:02:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:02:48 INFO] resetting WatchDogTimer
[Status 09:02:49 INFO] Starting Set [AERI set: name U167, 6 scans, 0 angle, D16300 command]
[Ingest 09:02:49 INFO] Sending XML status message
[Status 09:02:49 INFO] Mirror angle: 0
[Mirror 09:02:49 INFO] rotating to position U
[Status 09:02:49 INFO] .SET file for ACQ96 ready
[Ingest 09:02:49 INFO] Starting acquisition
[Status 09:02:50 INFO] reading housekeeping
[Status 09:03:11 INFO] acquire complete
[Status 09:03:12 INFO] writing housekeeping
[Sequencer 09:03:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:03:12 INFO] incremented U scene to 167 completed views
[Sequencer 09:03:12 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:03:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:03:12 INFO] incremented to [AERI set: name V167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:03:12 INFO] U167.SIG(18)
[sigmove 09:03:12 DEBUG] transformed U167Ma.SPC -> U167MA.SPC
[sigmove 09:03:12 DEBUG] transformed U167Mb.SPC -> U167MB.SPC
[sigmove 09:03:12 DEBUG] transformed U167Mc.SPC -> U167MC.SPC
[sigmove 09:03:12 DEBUG] transformed U167Md.SPC -> U167MD.SPC
[sigmove 09:03:12 DEBUG] transformed U167Me.SPC -> U167ME.SPC
[sigmove 09:03:12 DEBUG] transformed U167Mf.SPC -> U167MF.SPC
[Status 09:03:12 INFO] data for U167 transferred to science data processing
[Tidy 09:03:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:03:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:03:12 INFO] resetting WatchDogTimer
[Status 09:03:12 INFO] Starting Set [AERI set: name V167, 6 scans, 0 angle, D16300 command]
[Ingest 09:03:12 INFO] Sending XML status message
[Status 09:03:12 INFO] Mirror angle: 0
[Mirror 09:03:12 INFO] rotating to position V
[Status 09:03:13 INFO] .SET file for ACQ96 ready
[Ingest 09:03:13 INFO] Starting acquisition
[Status 09:03:13 INFO] reading housekeeping
[Status 09:03:31 INFO] acquire complete
[Status 09:03:32 INFO] writing housekeeping
[Sequencer 09:03:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:03:32 INFO] incremented V scene to 167 completed views
[Sequencer 09:03:32 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:03:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:03:32 INFO] incremented to [AERI set: name W167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:03:32 INFO] V167.SIG(18)
[sigmove 09:03:32 DEBUG] transformed V167Ma.SPC -> V167MA.SPC
[sigmove 09:03:32 DEBUG] transformed V167Mb.SPC -> V167MB.SPC
[sigmove 09:03:32 DEBUG] transformed V167Mc.SPC -> V167MC.SPC
[sigmove 09:03:32 DEBUG] transformed V167Md.SPC -> V167MD.SPC
[sigmove 09:03:32 DEBUG] transformed V167Me.SPC -> V167ME.SPC
[sigmove 09:03:32 DEBUG] transformed V167Mf.SPC -> V167MF.SPC
[Status 09:03:32 INFO] data for V167 transferred to science data processing
[Tidy 09:03:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:03:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:03:32 INFO] resetting WatchDogTimer
[Status 09:03:32 INFO] Starting Set [AERI set: name W167, 6 scans, 0 angle, D16300 command]
[Ingest 09:03:32 INFO] Sending XML status message
[Status 09:03:32 INFO] Mirror angle: 0
[Mirror 09:03:33 INFO] rotating to position W
[Status 09:03:33 INFO] .SET file for ACQ96 ready
[Ingest 09:03:33 INFO] Starting acquisition
[Status 09:03:33 INFO] reading housekeeping
[Status 09:03:52 INFO] acquire complete
[Status 09:03:52 INFO] writing housekeeping
[Sequencer 09:03:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:03:52 INFO] incremented W scene to 167 completed views
[Sequencer 09:03:52 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:03:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:03:52 INFO] incremented to [AERI set: name X167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:03:52 INFO] W167.SIG(18)
[sigmove 09:03:52 DEBUG] transformed W167Ma.SPC -> W167MA.SPC
[sigmove 09:03:52 DEBUG] transformed W167Mb.SPC -> W167MB.SPC
[sigmove 09:03:52 DEBUG] transformed W167Mc.SPC -> W167MC.SPC
[sigmove 09:03:52 DEBUG] transformed W167Md.SPC -> W167MD.SPC
[sigmove 09:03:52 DEBUG] transformed W167Me.SPC -> W167ME.SPC
[sigmove 09:03:52 DEBUG] transformed W167Mf.SPC -> W167MF.SPC
[Status 09:03:52 INFO] data for W167 transferred to science data processing
[Tidy 09:03:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:03:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:03:52 INFO] resetting WatchDogTimer
[Status 09:03:53 INFO] Starting Set [AERI set: name X167, 6 scans, 0 angle, D16300 command]
[Ingest 09:03:53 INFO] Sending XML status message
[Status 09:03:53 INFO] Mirror angle: 0
[Mirror 09:03:53 INFO] rotating to position X
[Status 09:03:53 INFO] .SET file for ACQ96 ready
[Ingest 09:03:53 INFO] Starting acquisition
[Status 09:03:54 INFO] reading housekeeping
[Status 09:04:12 INFO] acquire complete
[Status 09:04:12 INFO] writing housekeeping
[Sequencer 09:04:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:04:12 INFO] incremented X scene to 167 completed views
[Sequencer 09:04:12 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:04:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:04:12 INFO] incremented to [AERI set: name Y167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:04:12 INFO] X167.SIG(18)
[sigmove 09:04:12 DEBUG] transformed X167Ma.SPC -> X167MA.SPC
[sigmove 09:04:12 DEBUG] transformed X167Mb.SPC -> X167MB.SPC
[sigmove 09:04:12 DEBUG] transformed X167Mc.SPC -> X167MC.SPC
[sigmove 09:04:12 DEBUG] transformed X167Md.SPC -> X167MD.SPC
[sigmove 09:04:12 DEBUG] transformed X167Me.SPC -> X167ME.SPC
[sigmove 09:04:12 DEBUG] transformed X167Mf.SPC -> X167MF.SPC
[Status 09:04:12 INFO] data for X167 transferred to science data processing
[Tidy 09:04:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:04:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:04:13 INFO] resetting WatchDogTimer
[Status 09:04:13 INFO] Starting Set [AERI set: name Y167, 6 scans, 0 angle, D16300 command]
[Ingest 09:04:13 INFO] Sending XML status message
[Status 09:04:13 INFO] Mirror angle: 0
[Mirror 09:04:13 INFO] rotating to position Y
[Status 09:04:13 INFO] .SET file for ACQ96 ready
[Ingest 09:04:14 INFO] Starting acquisition
[Status 09:04:14 INFO] reading housekeeping
[Status 09:04:32 INFO] acquire complete
[Status 09:04:33 INFO] writing housekeeping
[Sequencer 09:04:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:04:33 INFO] incremented Y scene to 167 completed views
[Sequencer 09:04:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:04:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:04:33 INFO] incremented to [AERI set: name Z167, 6 scans, 0 angle, D16300 command] set
[sigmove 09:04:33 INFO] Y167.SIG(18)
[sigmove 09:04:33 DEBUG] transformed Y167Ma.SPC -> Y167MA.SPC
[sigmove 09:04:33 DEBUG] transformed Y167Mb.SPC -> Y167MB.SPC
[sigmove 09:04:33 DEBUG] transformed Y167Mc.SPC -> Y167MC.SPC
[sigmove 09:04:33 DEBUG] transformed Y167Md.SPC -> Y167MD.SPC
[sigmove 09:04:33 DEBUG] transformed Y167Me.SPC -> Y167ME.SPC
[sigmove 09:04:33 DEBUG] transformed Y167Mf.SPC -> Y167MF.SPC
[Status 09:04:33 INFO] data for Y167 transferred to science data processing
[Tidy 09:04:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:04:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:04:33 INFO] resetting WatchDogTimer
[Status 09:04:33 INFO] Starting Set [AERI set: name Z167, 6 scans, 0 angle, D16300 command]
[Ingest 09:04:33 INFO] Sending XML status message
[Status 09:04:33 INFO] Mirror angle: 0
[Mirror 09:04:33 INFO] rotating to position Z
[Status 09:04:34 INFO] .SET file for ACQ96 ready
[Ingest 09:04:34 INFO] Starting acquisition
[Status 09:04:34 INFO] reading housekeeping
[Status 09:04:52 INFO] acquire complete
[Status 09:04:53 INFO] writing housekeeping
[Sequencer 09:04:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:04:53 INFO] incremented Z scene to 167 completed views
[Sequencer 09:04:53 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:04:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:04:53 INFO] incremented to [AERI set: name A168, 6 scans, 120 angle, D28300 command] set
[sigmove 09:04:53 INFO] Z167.SIG(18)
[sigmove 09:04:53 DEBUG] transformed Z167Ma.SPC -> Z167MA.SPC
[sigmove 09:04:53 DEBUG] transformed Z167Mb.SPC -> Z167MB.SPC
[sigmove 09:04:53 DEBUG] transformed Z167Mc.SPC -> Z167MC.SPC
[sigmove 09:04:53 DEBUG] transformed Z167Md.SPC -> Z167MD.SPC
[sigmove 09:04:53 DEBUG] transformed Z167Me.SPC -> Z167ME.SPC
[sigmove 09:04:53 DEBUG] transformed Z167Mf.SPC -> Z167MF.SPC
[Status 09:04:53 INFO] data for Z167 transferred to science data processing
[Tidy 09:04:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:04:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:04:53 INFO] resetting WatchDogTimer
[Status 09:04:53 INFO] Starting Set [AERI set: name A168, 6 scans, 120 angle, D28300 command]
[Ingest 09:04:53 INFO] Sending XML status message
[Status 09:04:53 INFO] Mirror angle: 120
[Mirror 09:04:53 INFO] rotating to position A
[Status 09:04:55 INFO] .SET file for ACQ96 ready
[Ingest 09:04:55 INFO] Starting acquisition
[Status 09:04:55 INFO] reading housekeeping
[Status 09:05:14 INFO] acquire complete
[Status 09:05:14 INFO] writing housekeeping
[Sequencer 09:05:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:05:14 INFO] incremented A scene to 168 completed views
[Sequencer 09:05:14 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:05:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:05:14 INFO] incremented to [AERI set: name H168, 6 scans, 60 angle, D22500 command] set
[sigmove 09:05:14 INFO] A168.SIG(18)
[sigmove 09:05:14 DEBUG] transformed A168Ma.SPC -> A168MA.SPC
[sigmove 09:05:14 DEBUG] transformed A168Mb.SPC -> A168MB.SPC
[sigmove 09:05:14 DEBUG] transformed A168Mc.SPC -> A168MC.SPC
[sigmove 09:05:14 DEBUG] transformed A168Md.SPC -> A168MD.SPC
[sigmove 09:05:14 DEBUG] transformed A168Me.SPC -> A168ME.SPC
[sigmove 09:05:14 DEBUG] transformed A168Mf.SPC -> A168MF.SPC
[Status 09:05:14 INFO] data for A168 transferred to science data processing
[Tidy 09:05:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:05:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:05:14 INFO] resetting WatchDogTimer
[Status 09:05:14 INFO] Starting Set [AERI set: name H168, 6 scans, 60 angle, D22500 command]
[Ingest 09:05:14 INFO] Sending XML status message
[Status 09:05:14 INFO] Mirror angle: 60
[Mirror 09:05:15 INFO] rotating to position H
[Status 09:05:16 INFO] .SET file for ACQ96 ready
[Ingest 09:05:16 INFO] Starting acquisition
[Status 09:05:16 INFO] reading housekeeping
[Status 09:05:34 INFO] acquire complete
[Status 09:05:34 INFO] writing housekeeping
[Sequencer 09:05:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:05:34 INFO] incremented H scene to 168 completed views
[Sequencer 09:05:34 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:05:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:05:34 INFO] incremented to [AERI set: name S168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:05:34 INFO] H168.SIG(18)
[sigmove 09:05:34 DEBUG] transformed H168Ma.SPC -> H168MA.SPC
[sigmove 09:05:34 DEBUG] transformed H168Mb.SPC -> H168MB.SPC
[sigmove 09:05:34 DEBUG] transformed H168Mc.SPC -> H168MC.SPC
[sigmove 09:05:34 DEBUG] transformed H168Md.SPC -> H168MD.SPC
[sigmove 09:05:34 DEBUG] transformed H168Me.SPC -> H168ME.SPC
[sigmove 09:05:34 DEBUG] transformed H168Mf.SPC -> H168MF.SPC
[Status 09:05:34 INFO] data for H168 transferred to science data processing
[Tidy 09:05:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:05:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:05:34 INFO] resetting WatchDogTimer
[Status 09:05:35 INFO] Starting Set [AERI set: name S168, 6 scans, 0 angle, D16300 command]
[Ingest 09:05:35 INFO] Sending XML status message
[Status 09:05:35 INFO] Mirror angle: 0
[Mirror 09:05:35 INFO] rotating to position S
[Status 09:05:36 INFO] .SET file for ACQ96 ready
[Ingest 09:05:36 INFO] Starting acquisition
[Status 09:05:36 INFO] reading housekeeping
[Status 09:05:54 INFO] acquire complete
[Status 09:05:55 INFO] writing housekeeping
[Sequencer 09:05:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:05:55 INFO] incremented S scene to 168 completed views
[Sequencer 09:05:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:05:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:05:55 INFO] incremented to [AERI set: name T168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:05:55 INFO] S168.SIG(18)
[sigmove 09:05:55 DEBUG] transformed S168Ma.SPC -> S168MA.SPC
[sigmove 09:05:55 DEBUG] transformed S168Mb.SPC -> S168MB.SPC
[sigmove 09:05:55 DEBUG] transformed S168Mc.SPC -> S168MC.SPC
[sigmove 09:05:55 DEBUG] transformed S168Md.SPC -> S168MD.SPC
[sigmove 09:05:55 DEBUG] transformed S168Me.SPC -> S168ME.SPC
[sigmove 09:05:55 DEBUG] transformed S168Mf.SPC -> S168MF.SPC
[Status 09:05:55 INFO] data for S168 transferred to science data processing
[Tidy 09:05:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:05:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:05:55 INFO] resetting WatchDogTimer
[Status 09:05:55 INFO] Starting Set [AERI set: name T168, 6 scans, 0 angle, D16300 command]
[Ingest 09:05:55 INFO] Sending XML status message
[Status 09:05:55 INFO] Mirror angle: 0
[Mirror 09:05:55 INFO] rotating to position T
[Status 09:05:55 INFO] .SET file for ACQ96 ready
[Ingest 09:05:56 INFO] Starting acquisition
[Status 09:05:56 INFO] reading housekeeping
[Status 09:06:14 INFO] acquire complete
[Status 09:06:15 INFO] writing housekeeping
[Sequencer 09:06:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:06:15 INFO] incremented T scene to 168 completed views
[Sequencer 09:06:15 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:06:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:06:15 INFO] incremented to [AERI set: name U168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:06:15 INFO] T168.SIG(18)
[sigmove 09:06:15 DEBUG] transformed T168Ma.SPC -> T168MA.SPC
[sigmove 09:06:15 DEBUG] transformed T168Mb.SPC -> T168MB.SPC
[sigmove 09:06:15 DEBUG] transformed T168Mc.SPC -> T168MC.SPC
[sigmove 09:06:15 DEBUG] transformed T168Md.SPC -> T168MD.SPC
[sigmove 09:06:15 DEBUG] transformed T168Me.SPC -> T168ME.SPC
[sigmove 09:06:15 DEBUG] transformed T168Mf.SPC -> T168MF.SPC
[Status 09:06:15 INFO] data for T168 transferred to science data processing
[Tidy 09:06:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:06:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:06:15 INFO] resetting WatchDogTimer
[Status 09:06:15 INFO] Starting Set [AERI set: name U168, 6 scans, 0 angle, D16300 command]
[Ingest 09:06:15 INFO] Sending XML status message
[Status 09:06:15 INFO] Mirror angle: 0
[Mirror 09:06:15 INFO] rotating to position U
[Status 09:06:16 INFO] .SET file for ACQ96 ready
[Ingest 09:06:16 INFO] Starting acquisition
[Status 09:06:16 INFO] reading housekeeping
[Status 09:06:34 INFO] acquire complete
[Status 09:06:35 INFO] writing housekeeping
[Sequencer 09:06:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:06:35 INFO] incremented U scene to 168 completed views
[Sequencer 09:06:35 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:06:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:06:35 INFO] incremented to [AERI set: name V168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:06:35 INFO] U168.SIG(18)
[sigmove 09:06:35 DEBUG] transformed U168Ma.SPC -> U168MA.SPC
[sigmove 09:06:35 DEBUG] transformed U168Mb.SPC -> U168MB.SPC
[sigmove 09:06:35 DEBUG] transformed U168Mc.SPC -> U168MC.SPC
[sigmove 09:06:35 DEBUG] transformed U168Md.SPC -> U168MD.SPC
[sigmove 09:06:35 DEBUG] transformed U168Me.SPC -> U168ME.SPC
[sigmove 09:06:35 DEBUG] transformed U168Mf.SPC -> U168MF.SPC
[Status 09:06:35 INFO] data for U168 transferred to science data processing
[Tidy 09:06:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:06:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:06:35 INFO] resetting WatchDogTimer
[Status 09:06:35 INFO] Starting Set [AERI set: name V168, 6 scans, 0 angle, D16300 command]
[Ingest 09:06:35 INFO] Sending XML status message
[Status 09:06:35 INFO] Mirror angle: 0
[Mirror 09:06:35 INFO] rotating to position V
[Status 09:06:36 INFO] .SET file for ACQ96 ready
[Ingest 09:06:36 INFO] Starting acquisition
[Status 09:06:36 INFO] reading housekeeping
[Status 09:06:54 INFO] acquire complete
[Status 09:06:55 INFO] writing housekeeping
[Sequencer 09:06:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:06:55 INFO] incremented V scene to 168 completed views
[Sequencer 09:06:55 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:06:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:06:55 INFO] incremented to [AERI set: name W168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:06:55 INFO] V168.SIG(18)
[sigmove 09:06:55 DEBUG] transformed V168Ma.SPC -> V168MA.SPC
[sigmove 09:06:55 DEBUG] transformed V168Mb.SPC -> V168MB.SPC
[sigmove 09:06:55 DEBUG] transformed V168Mc.SPC -> V168MC.SPC
[sigmove 09:06:55 DEBUG] transformed V168Md.SPC -> V168MD.SPC
[sigmove 09:06:55 DEBUG] transformed V168Me.SPC -> V168ME.SPC
[sigmove 09:06:55 DEBUG] transformed V168Mf.SPC -> V168MF.SPC
[Status 09:06:55 INFO] data for V168 transferred to science data processing
[Tidy 09:06:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:06:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:06:55 INFO] resetting WatchDogTimer
[Status 09:06:55 INFO] Starting Set [AERI set: name W168, 6 scans, 0 angle, D16300 command]
[Ingest 09:06:55 INFO] Sending XML status message
[Status 09:06:55 INFO] Mirror angle: 0
[Mirror 09:06:56 INFO] rotating to position W
[Status 09:06:56 INFO] .SET file for ACQ96 ready
[Ingest 09:06:56 INFO] Starting acquisition
[Status 09:06:56 INFO] reading housekeeping
[Status 09:07:15 INFO] acquire complete
[Status 09:07:15 INFO] writing housekeeping
[Sequencer 09:07:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:07:15 INFO] incremented W scene to 168 completed views
[Sequencer 09:07:15 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:07:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:07:15 INFO] incremented to [AERI set: name X168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:07:15 INFO] W168.SIG(18)
[sigmove 09:07:15 DEBUG] transformed W168Ma.SPC -> W168MA.SPC
[sigmove 09:07:15 DEBUG] transformed W168Mb.SPC -> W168MB.SPC
[sigmove 09:07:15 DEBUG] transformed W168Mc.SPC -> W168MC.SPC
[sigmove 09:07:15 DEBUG] transformed W168Md.SPC -> W168MD.SPC
[sigmove 09:07:15 DEBUG] transformed W168Me.SPC -> W168ME.SPC
[sigmove 09:07:15 DEBUG] transformed W168Mf.SPC -> W168MF.SPC
[Status 09:07:15 INFO] data for W168 transferred to science data processing
[Tidy 09:07:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:07:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:07:15 INFO] resetting WatchDogTimer
[Status 09:07:16 INFO] Starting Set [AERI set: name X168, 6 scans, 0 angle, D16300 command]
[Ingest 09:07:16 INFO] Sending XML status message
[Status 09:07:16 INFO] Mirror angle: 0
[Mirror 09:07:16 INFO] rotating to position X
[Status 09:07:16 INFO] .SET file for ACQ96 ready
[Ingest 09:07:16 INFO] Starting acquisition
[Status 09:07:17 INFO] reading housekeeping
[Status 09:07:35 INFO] acquire complete
[Status 09:07:36 INFO] writing housekeeping
[Sequencer 09:07:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:07:36 INFO] incremented X scene to 168 completed views
[Sequencer 09:07:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:07:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:07:36 INFO] incremented to [AERI set: name Y168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:07:36 INFO] X168.SIG(18)
[sigmove 09:07:36 DEBUG] transformed X168Ma.SPC -> X168MA.SPC
[sigmove 09:07:36 DEBUG] transformed X168Mb.SPC -> X168MB.SPC
[sigmove 09:07:36 DEBUG] transformed X168Mc.SPC -> X168MC.SPC
[sigmove 09:07:36 DEBUG] transformed X168Md.SPC -> X168MD.SPC
[sigmove 09:07:36 DEBUG] transformed X168Me.SPC -> X168ME.SPC
[sigmove 09:07:36 DEBUG] transformed X168Mf.SPC -> X168MF.SPC
[Status 09:07:36 INFO] data for X168 transferred to science data processing
[Tidy 09:07:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:07:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:07:36 INFO] resetting WatchDogTimer
[Status 09:07:36 INFO] Starting Set [AERI set: name Y168, 6 scans, 0 angle, D16300 command]
[Ingest 09:07:36 INFO] Sending XML status message
[Status 09:07:36 INFO] Mirror angle: 0
[Mirror 09:07:36 INFO] rotating to position Y
[Status 09:07:36 INFO] .SET file for ACQ96 ready
[Ingest 09:07:37 INFO] Starting acquisition
[Status 09:07:37 INFO] reading housekeeping
[Status 09:07:55 INFO] acquire complete
[Status 09:07:56 INFO] writing housekeeping
[Sequencer 09:07:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:07:56 INFO] incremented Y scene to 168 completed views
[Sequencer 09:07:56 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:07:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:07:56 INFO] incremented to [AERI set: name Z168, 6 scans, 0 angle, D16300 command] set
[sigmove 09:07:56 INFO] Y168.SIG(18)
[sigmove 09:07:56 DEBUG] transformed Y168Ma.SPC -> Y168MA.SPC
[sigmove 09:07:56 DEBUG] transformed Y168Mb.SPC -> Y168MB.SPC
[sigmove 09:07:56 DEBUG] transformed Y168Mc.SPC -> Y168MC.SPC
[sigmove 09:07:56 DEBUG] transformed Y168Md.SPC -> Y168MD.SPC
[sigmove 09:07:56 DEBUG] transformed Y168Me.SPC -> Y168ME.SPC
[sigmove 09:07:56 DEBUG] transformed Y168Mf.SPC -> Y168MF.SPC
[Status 09:07:56 INFO] data for Y168 transferred to science data processing
[Tidy 09:07:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:07:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:07:56 INFO] resetting WatchDogTimer
[Status 09:07:56 INFO] Starting Set [AERI set: name Z168, 6 scans, 0 angle, D16300 command]
[Ingest 09:07:56 INFO] Sending XML status message
[Status 09:07:56 INFO] Mirror angle: 0
[Mirror 09:07:56 INFO] rotating to position Z
[Status 09:07:57 INFO] .SET file for ACQ96 ready
[Ingest 09:07:57 INFO] Starting acquisition
[Status 09:07:57 INFO] reading housekeeping
[Status 09:08:15 INFO] acquire complete
[Status 09:08:16 INFO] writing housekeeping
[Sequencer 09:08:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:08:16 INFO] incremented Z scene to 168 completed views
[Sequencer 09:08:16 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:08:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:08:16 INFO] incremented to [AERI set: name H169, 6 scans, 60 angle, D22500 command] set
[sigmove 09:08:16 INFO] Z168.SIG(18)
[sigmove 09:08:16 DEBUG] transformed Z168Ma.SPC -> Z168MA.SPC
[sigmove 09:08:16 DEBUG] transformed Z168Mb.SPC -> Z168MB.SPC
[sigmove 09:08:16 DEBUG] transformed Z168Mc.SPC -> Z168MC.SPC
[sigmove 09:08:16 DEBUG] transformed Z168Md.SPC -> Z168MD.SPC
[sigmove 09:08:16 DEBUG] transformed Z168Me.SPC -> Z168ME.SPC
[sigmove 09:08:16 DEBUG] transformed Z168Mf.SPC -> Z168MF.SPC
[Status 09:08:16 INFO] data for Z168 transferred to science data processing
[Tidy 09:08:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:08:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:08:16 INFO] resetting WatchDogTimer
[Status 09:08:16 INFO] Starting Set [AERI set: name H169, 6 scans, 60 angle, D22500 command]
[Ingest 09:08:16 INFO] Sending XML status message
[Status 09:08:16 INFO] Mirror angle: 60
[Mirror 09:08:16 INFO] rotating to position H
[Status 09:08:17 INFO] .SET file for ACQ96 ready
[Ingest 09:08:17 INFO] Starting acquisition
[Status 09:08:18 INFO] reading housekeeping
[Status 09:08:35 INFO] acquire complete
[Status 09:08:36 INFO] writing housekeeping
[Sequencer 09:08:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:08:36 INFO] incremented H scene to 169 completed views
[Sequencer 09:08:36 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:08:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:08:36 INFO] incremented to [AERI set: name A169, 6 scans, 120 angle, D28300 command] set
[sigmove 09:08:36 INFO] H169.SIG(18)
[sigmove 09:08:36 DEBUG] transformed H169Ma.SPC -> H169MA.SPC
[sigmove 09:08:36 DEBUG] transformed H169Mb.SPC -> H169MB.SPC
[sigmove 09:08:36 DEBUG] transformed H169Mc.SPC -> H169MC.SPC
[sigmove 09:08:36 DEBUG] transformed H169Md.SPC -> H169MD.SPC
[sigmove 09:08:36 DEBUG] transformed H169Me.SPC -> H169ME.SPC
[sigmove 09:08:36 DEBUG] transformed H169Mf.SPC -> H169MF.SPC
[Status 09:08:36 INFO] data for H169 transferred to science data processing
[Tidy 09:08:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:08:36 INFO] A167.FIN(19),H167.FIN(19),S167.FIN(19),T167.FIN(19),U167.FIN(19),V167.FIN(19),W167.FIN(19),X167.FIN(19),Y167.FIN(19),Z167.FIN(19),A168.FIN(19),H168.FIN(19),S168.FIN(19),T168.FIN(19),U168.FIN(19),V168.FIN(19),W168.FIN(19),X168.FIN(19),Y168.FIN(19),Z168.FIN(19)
[sigmove 09:08:36 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:08:36 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:08:39 DEBUG] done zipping
[WatchDog 09:08:39 INFO] resetting WatchDogTimer
[Status 09:08:40 INFO] Starting Set [AERI set: name A169, 6 scans, 120 angle, D28300 command]
[Ingest 09:08:40 INFO] Sending XML status message
[Status 09:08:40 INFO] Mirror angle: 120
[Mirror 09:08:40 INFO] rotating to position A
[Status 09:08:41 INFO] .SET file for ACQ96 ready
[Ingest 09:08:41 INFO] Starting acquisition
[Status 09:08:41 INFO] reading housekeeping
[Status 09:08:59 INFO] acquire complete
[Status 09:09:00 INFO] writing housekeeping
[Sequencer 09:09:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:09:00 INFO] incremented A scene to 169 completed views
[Sequencer 09:09:00 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:09:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:09:00 INFO] incremented to [AERI set: name S169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:09:00 INFO] A169.SIG(18)
[sigmove 09:09:00 DEBUG] transformed A169Ma.SPC -> A169MA.SPC
[sigmove 09:09:00 DEBUG] transformed A169Mb.SPC -> A169MB.SPC
[sigmove 09:09:00 DEBUG] transformed A169Mc.SPC -> A169MC.SPC
[sigmove 09:09:00 DEBUG] transformed A169Md.SPC -> A169MD.SPC
[sigmove 09:09:00 DEBUG] transformed A169Me.SPC -> A169ME.SPC
[sigmove 09:09:00 DEBUG] transformed A169Mf.SPC -> A169MF.SPC
[Status 09:09:00 INFO] data for A169 transferred to science data processing
[Tidy 09:09:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:09:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:09:00 INFO] resetting WatchDogTimer
[Status 09:09:00 INFO] Starting Set [AERI set: name S169, 6 scans, 0 angle, D16300 command]
[Ingest 09:09:00 INFO] Sending XML status message
[Status 09:09:00 INFO] Mirror angle: 0
[Mirror 09:09:00 INFO] rotating to position S
[Status 09:09:02 INFO] .SET file for ACQ96 ready
[Ingest 09:09:02 INFO] Starting acquisition
[Status 09:09:02 INFO] reading housekeeping
[Status 09:09:20 INFO] acquire complete
[Status 09:09:21 INFO] writing housekeeping
[Sequencer 09:09:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:09:21 INFO] incremented S scene to 169 completed views
[Sequencer 09:09:21 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:09:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:09:21 INFO] incremented to [AERI set: name T169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:09:21 INFO] S169.SIG(18)
[sigmove 09:09:21 DEBUG] transformed S169Ma.SPC -> S169MA.SPC
[sigmove 09:09:21 DEBUG] transformed S169Mb.SPC -> S169MB.SPC
[sigmove 09:09:21 DEBUG] transformed S169Mc.SPC -> S169MC.SPC
[sigmove 09:09:21 DEBUG] transformed S169Md.SPC -> S169MD.SPC
[sigmove 09:09:21 DEBUG] transformed S169Me.SPC -> S169ME.SPC
[sigmove 09:09:21 DEBUG] transformed S169Mf.SPC -> S169MF.SPC
[Status 09:09:21 INFO] data for S169 transferred to science data processing
[Tidy 09:09:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:09:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:09:21 INFO] resetting WatchDogTimer
[Status 09:09:21 INFO] Starting Set [AERI set: name T169, 6 scans, 0 angle, D16300 command]
[Ingest 09:09:21 INFO] Sending XML status message
[Status 09:09:21 INFO] Mirror angle: 0
[Mirror 09:09:21 INFO] rotating to position T
[Status 09:09:22 INFO] .SET file for ACQ96 ready
[Ingest 09:09:22 INFO] Starting acquisition
[Status 09:09:22 INFO] reading housekeeping
[Status 09:09:40 INFO] acquire complete
[Status 09:09:41 INFO] writing housekeeping
[Sequencer 09:09:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:09:41 INFO] incremented T scene to 169 completed views
[Sequencer 09:09:41 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:09:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:09:41 INFO] incremented to [AERI set: name U169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:09:41 INFO] T169.SIG(18)
[sigmove 09:09:41 DEBUG] transformed T169Ma.SPC -> T169MA.SPC
[sigmove 09:09:41 DEBUG] transformed T169Mb.SPC -> T169MB.SPC
[sigmove 09:09:41 DEBUG] transformed T169Mc.SPC -> T169MC.SPC
[sigmove 09:09:41 DEBUG] transformed T169Md.SPC -> T169MD.SPC
[sigmove 09:09:41 DEBUG] transformed T169Me.SPC -> T169ME.SPC
[sigmove 09:09:41 DEBUG] transformed T169Mf.SPC -> T169MF.SPC
[Status 09:09:41 INFO] data for T169 transferred to science data processing
[Tidy 09:09:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:09:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:09:41 INFO] resetting WatchDogTimer
[Status 09:09:41 INFO] Starting Set [AERI set: name U169, 6 scans, 0 angle, D16300 command]
[Ingest 09:09:41 INFO] Sending XML status message
[Status 09:09:41 INFO] Mirror angle: 0
[Mirror 09:09:42 INFO] rotating to position U
[Status 09:09:42 INFO] .SET file for ACQ96 ready
[Ingest 09:09:42 INFO] Starting acquisition
[Status 09:09:42 INFO] reading housekeeping
[Status 09:10:01 INFO] acquire complete
[Status 09:10:02 INFO] writing housekeeping
[Sequencer 09:10:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:10:02 INFO] incremented U scene to 169 completed views
[Sequencer 09:10:02 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:10:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:10:02 INFO] incremented to [AERI set: name V169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:10:02 INFO] U169.SIG(18)
[sigmove 09:10:02 DEBUG] transformed U169Ma.SPC -> U169MA.SPC
[sigmove 09:10:02 DEBUG] transformed U169Mb.SPC -> U169MB.SPC
[sigmove 09:10:02 DEBUG] transformed U169Mc.SPC -> U169MC.SPC
[sigmove 09:10:02 DEBUG] transformed U169Md.SPC -> U169MD.SPC
[sigmove 09:10:02 DEBUG] transformed U169Me.SPC -> U169ME.SPC
[sigmove 09:10:02 DEBUG] transformed U169Mf.SPC -> U169MF.SPC
[Status 09:10:02 INFO] data for U169 transferred to science data processing
[Tidy 09:10:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:10:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:10:02 INFO] resetting WatchDogTimer
[Status 09:10:02 INFO] Starting Set [AERI set: name V169, 6 scans, 0 angle, D16300 command]
[Ingest 09:10:02 INFO] Sending XML status message
[Status 09:10:02 INFO] Mirror angle: 0
[Mirror 09:10:02 INFO] rotating to position V
[Status 09:10:03 INFO] .SET file for ACQ96 ready
[Ingest 09:10:03 INFO] Starting acquisition
[Status 09:10:03 INFO] reading housekeeping
[Status 09:10:21 INFO] acquire complete
[Status 09:10:22 INFO] writing housekeeping
[Sequencer 09:10:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:10:22 INFO] incremented V scene to 169 completed views
[Sequencer 09:10:22 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:10:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:10:22 INFO] incremented to [AERI set: name W169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:10:22 INFO] V169.SIG(18)
[sigmove 09:10:22 DEBUG] transformed V169Ma.SPC -> V169MA.SPC
[sigmove 09:10:22 DEBUG] transformed V169Mb.SPC -> V169MB.SPC
[sigmove 09:10:22 DEBUG] transformed V169Mc.SPC -> V169MC.SPC
[sigmove 09:10:22 DEBUG] transformed V169Md.SPC -> V169MD.SPC
[sigmove 09:10:22 DEBUG] transformed V169Me.SPC -> V169ME.SPC
[sigmove 09:10:22 DEBUG] transformed V169Mf.SPC -> V169MF.SPC
[Status 09:10:22 INFO] data for V169 transferred to science data processing
[Tidy 09:10:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:10:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:10:22 INFO] resetting WatchDogTimer
[Status 09:10:22 INFO] Starting Set [AERI set: name W169, 6 scans, 0 angle, D16300 command]
[Ingest 09:10:22 INFO] Sending XML status message
[Status 09:10:22 INFO] Mirror angle: 0
[Mirror 09:10:22 INFO] rotating to position W
[Status 09:10:22 INFO] .SET file for ACQ96 ready
[Ingest 09:10:23 INFO] Starting acquisition
[Status 09:10:23 INFO] reading housekeeping
[Status 09:10:41 INFO] acquire complete
[Status 09:10:42 INFO] writing housekeeping
[Sequencer 09:10:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:10:42 INFO] incremented W scene to 169 completed views
[Sequencer 09:10:42 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:10:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:10:42 INFO] incremented to [AERI set: name X169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:10:42 INFO] W169.SIG(18)
[sigmove 09:10:42 DEBUG] transformed W169Ma.SPC -> W169MA.SPC
[sigmove 09:10:42 DEBUG] transformed W169Mb.SPC -> W169MB.SPC
[sigmove 09:10:42 DEBUG] transformed W169Mc.SPC -> W169MC.SPC
[sigmove 09:10:42 DEBUG] transformed W169Md.SPC -> W169MD.SPC
[sigmove 09:10:42 DEBUG] transformed W169Me.SPC -> W169ME.SPC
[sigmove 09:10:42 DEBUG] transformed W169Mf.SPC -> W169MF.SPC
[Status 09:10:42 INFO] data for W169 transferred to science data processing
[Tidy 09:10:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:10:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:10:42 INFO] resetting WatchDogTimer
[Status 09:10:42 INFO] Starting Set [AERI set: name X169, 6 scans, 0 angle, D16300 command]
[Ingest 09:10:42 INFO] Sending XML status message
[Status 09:10:42 INFO] Mirror angle: 0
[Mirror 09:10:42 INFO] rotating to position X
[Status 09:10:43 INFO] .SET file for ACQ96 ready
[Ingest 09:10:43 INFO] Starting acquisition
[Status 09:10:43 INFO] reading housekeeping
[Status 09:11:01 INFO] acquire complete
[Status 09:11:02 INFO] writing housekeeping
[Sequencer 09:11:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:11:02 INFO] incremented X scene to 169 completed views
[Sequencer 09:11:02 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:11:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:11:02 INFO] incremented to [AERI set: name Y169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:11:02 INFO] X169.SIG(18)
[sigmove 09:11:02 DEBUG] transformed X169Ma.SPC -> X169MA.SPC
[sigmove 09:11:02 DEBUG] transformed X169Mb.SPC -> X169MB.SPC
[sigmove 09:11:02 DEBUG] transformed X169Mc.SPC -> X169MC.SPC
[sigmove 09:11:02 DEBUG] transformed X169Md.SPC -> X169MD.SPC
[sigmove 09:11:02 DEBUG] transformed X169Me.SPC -> X169ME.SPC
[sigmove 09:11:02 DEBUG] transformed X169Mf.SPC -> X169MF.SPC
[Status 09:11:02 INFO] data for X169 transferred to science data processing
[Tidy 09:11:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:11:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:11:02 INFO] resetting WatchDogTimer
[Status 09:11:02 INFO] Starting Set [AERI set: name Y169, 6 scans, 0 angle, D16300 command]
[Ingest 09:11:02 INFO] Sending XML status message
[Status 09:11:02 INFO] Mirror angle: 0
[Mirror 09:11:02 INFO] rotating to position Y
[Status 09:11:03 INFO] .SET file for ACQ96 ready
[Ingest 09:11:03 INFO] Starting acquisition
[Status 09:11:03 INFO] reading housekeeping
[Status 09:11:21 INFO] acquire complete
[Status 09:11:22 INFO] writing housekeeping
[Sequencer 09:11:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:11:22 INFO] incremented Y scene to 169 completed views
[Sequencer 09:11:22 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:11:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:11:22 INFO] incremented to [AERI set: name Z169, 6 scans, 0 angle, D16300 command] set
[sigmove 09:11:22 INFO] Y169.SIG(18)
[sigmove 09:11:22 DEBUG] transformed Y169Ma.SPC -> Y169MA.SPC
[sigmove 09:11:22 DEBUG] transformed Y169Mb.SPC -> Y169MB.SPC
[sigmove 09:11:22 DEBUG] transformed Y169Mc.SPC -> Y169MC.SPC
[sigmove 09:11:22 DEBUG] transformed Y169Md.SPC -> Y169MD.SPC
[sigmove 09:11:22 DEBUG] transformed Y169Me.SPC -> Y169ME.SPC
[sigmove 09:11:22 DEBUG] transformed Y169Mf.SPC -> Y169MF.SPC
[Status 09:11:22 INFO] data for Y169 transferred to science data processing
[Tidy 09:11:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:11:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:11:22 INFO] resetting WatchDogTimer
[Status 09:11:22 INFO] Starting Set [AERI set: name Z169, 6 scans, 0 angle, D16300 command]
[Ingest 09:11:22 INFO] Sending XML status message
[Status 09:11:22 INFO] Mirror angle: 0
[Mirror 09:11:23 INFO] rotating to position Z
[Status 09:11:23 INFO] .SET file for ACQ96 ready
[Ingest 09:11:23 INFO] Starting acquisition
[Status 09:11:23 INFO] reading housekeeping
[Status 09:11:42 INFO] acquire complete
[Status 09:11:42 INFO] writing housekeeping
[Sequencer 09:11:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:11:42 INFO] incremented Z scene to 169 completed views
[Sequencer 09:11:42 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:11:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:11:42 INFO] incremented to [AERI set: name A170, 6 scans, 120 angle, D28300 command] set
[sigmove 09:11:42 INFO] Z169.SIG(18)
[sigmove 09:11:42 DEBUG] transformed Z169Ma.SPC -> Z169MA.SPC
[sigmove 09:11:42 DEBUG] transformed Z169Mb.SPC -> Z169MB.SPC
[sigmove 09:11:42 DEBUG] transformed Z169Mc.SPC -> Z169MC.SPC
[sigmove 09:11:42 DEBUG] transformed Z169Md.SPC -> Z169MD.SPC
[sigmove 09:11:42 DEBUG] transformed Z169Me.SPC -> Z169ME.SPC
[sigmove 09:11:42 DEBUG] transformed Z169Mf.SPC -> Z169MF.SPC
[Status 09:11:42 INFO] data for Z169 transferred to science data processing
[Tidy 09:11:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:11:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:11:42 INFO] resetting WatchDogTimer
[Status 09:11:43 INFO] Starting Set [AERI set: name A170, 6 scans, 120 angle, D28300 command]
[Ingest 09:11:43 INFO] Sending XML status message
[Status 09:11:43 INFO] Mirror angle: 120
[Mirror 09:11:43 INFO] rotating to position A
[Status 09:11:44 INFO] .SET file for ACQ96 ready
[Ingest 09:11:44 INFO] Starting acquisition
[Status 09:11:45 INFO] reading housekeeping
[Status 09:12:03 INFO] acquire complete
[Status 09:12:04 INFO] writing housekeeping
[Sequencer 09:12:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:12:04 INFO] incremented A scene to 170 completed views
[Sequencer 09:12:04 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:12:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:12:04 INFO] incremented to [AERI set: name H170, 6 scans, 60 angle, D22500 command] set
[sigmove 09:12:04 INFO] A170.SIG(18)
[sigmove 09:12:04 DEBUG] transformed A170Ma.SPC -> A170MA.SPC
[sigmove 09:12:04 DEBUG] transformed A170Mb.SPC -> A170MB.SPC
[sigmove 09:12:04 DEBUG] transformed A170Mc.SPC -> A170MC.SPC
[sigmove 09:12:04 DEBUG] transformed A170Md.SPC -> A170MD.SPC
[sigmove 09:12:04 DEBUG] transformed A170Me.SPC -> A170ME.SPC
[sigmove 09:12:04 DEBUG] transformed A170Mf.SPC -> A170MF.SPC
[Status 09:12:04 INFO] data for A170 transferred to science data processing
[Tidy 09:12:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:12:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:12:04 INFO] resetting WatchDogTimer
[Status 09:12:04 INFO] Starting Set [AERI set: name H170, 6 scans, 60 angle, D22500 command]
[Ingest 09:12:04 INFO] Sending XML status message
[Status 09:12:04 INFO] Mirror angle: 60
[Mirror 09:12:04 INFO] rotating to position H
[Status 09:12:05 INFO] .SET file for ACQ96 ready
[Ingest 09:12:05 INFO] Starting acquisition
[Status 09:12:05 INFO] reading housekeeping
[Status 09:12:23 INFO] acquire complete
[Status 09:12:24 INFO] writing housekeeping
[Sequencer 09:12:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:12:24 INFO] incremented H scene to 170 completed views
[Sequencer 09:12:24 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:12:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:12:24 INFO] incremented to [AERI set: name S170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:12:24 INFO] H170.SIG(18)
[sigmove 09:12:24 DEBUG] transformed H170Ma.SPC -> H170MA.SPC
[sigmove 09:12:24 DEBUG] transformed H170Mb.SPC -> H170MB.SPC
[sigmove 09:12:24 DEBUG] transformed H170Mc.SPC -> H170MC.SPC
[sigmove 09:12:24 DEBUG] transformed H170Md.SPC -> H170MD.SPC
[sigmove 09:12:24 DEBUG] transformed H170Me.SPC -> H170ME.SPC
[sigmove 09:12:24 DEBUG] transformed H170Mf.SPC -> H170MF.SPC
[Status 09:12:24 INFO] data for H170 transferred to science data processing
[Tidy 09:12:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:12:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:12:24 INFO] resetting WatchDogTimer
[Status 09:12:24 INFO] Starting Set [AERI set: name S170, 6 scans, 0 angle, D16300 command]
[Ingest 09:12:24 INFO] Sending XML status message
[Status 09:12:24 INFO] Mirror angle: 0
[Mirror 09:12:24 INFO] rotating to position S
[Status 09:12:25 INFO] .SET file for ACQ96 ready
[Ingest 09:12:25 INFO] Starting acquisition
[Status 09:12:26 INFO] reading housekeeping
[Status 09:12:43 INFO] acquire complete
[Status 09:12:44 INFO] writing housekeeping
[Sequencer 09:12:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:12:44 INFO] incremented S scene to 170 completed views
[Sequencer 09:12:44 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:12:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:12:44 INFO] incremented to [AERI set: name T170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:12:44 INFO] S170.SIG(18)
[sigmove 09:12:44 DEBUG] transformed S170Ma.SPC -> S170MA.SPC
[sigmove 09:12:44 DEBUG] transformed S170Mb.SPC -> S170MB.SPC
[sigmove 09:12:44 DEBUG] transformed S170Mc.SPC -> S170MC.SPC
[sigmove 09:12:44 DEBUG] transformed S170Md.SPC -> S170MD.SPC
[sigmove 09:12:44 DEBUG] transformed S170Me.SPC -> S170ME.SPC
[sigmove 09:12:44 DEBUG] transformed S170Mf.SPC -> S170MF.SPC
[Status 09:12:44 INFO] data for S170 transferred to science data processing
[Tidy 09:12:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:12:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:12:44 INFO] resetting WatchDogTimer
[Status 09:12:44 INFO] Starting Set [AERI set: name T170, 6 scans, 0 angle, D16300 command]
[Ingest 09:12:44 INFO] Sending XML status message
[Status 09:12:44 INFO] Mirror angle: 0
[Mirror 09:12:44 INFO] rotating to position T
[Status 09:12:45 INFO] .SET file for ACQ96 ready
[Ingest 09:12:45 INFO] Starting acquisition
[Status 09:12:45 INFO] reading housekeeping
[Status 09:13:04 INFO] acquire complete
[Status 09:13:04 INFO] writing housekeeping
[Sequencer 09:13:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:13:04 INFO] incremented T scene to 170 completed views
[Sequencer 09:13:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:13:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:13:04 INFO] incremented to [AERI set: name U170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:13:04 INFO] T170.SIG(18)
[sigmove 09:13:04 DEBUG] transformed T170Ma.SPC -> T170MA.SPC
[sigmove 09:13:04 DEBUG] transformed T170Mb.SPC -> T170MB.SPC
[sigmove 09:13:04 DEBUG] transformed T170Mc.SPC -> T170MC.SPC
[sigmove 09:13:04 DEBUG] transformed T170Md.SPC -> T170MD.SPC
[sigmove 09:13:04 DEBUG] transformed T170Me.SPC -> T170ME.SPC
[sigmove 09:13:04 DEBUG] transformed T170Mf.SPC -> T170MF.SPC
[Status 09:13:04 INFO] data for T170 transferred to science data processing
[Tidy 09:13:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:13:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:13:04 INFO] resetting WatchDogTimer
[Status 09:13:04 INFO] Starting Set [AERI set: name U170, 6 scans, 0 angle, D16300 command]
[Ingest 09:13:04 INFO] Sending XML status message
[Status 09:13:04 INFO] Mirror angle: 0
[Mirror 09:13:05 INFO] rotating to position U
[Status 09:13:05 INFO] .SET file for ACQ96 ready
[Ingest 09:13:05 INFO] Starting acquisition
[Status 09:13:05 INFO] reading housekeeping
[Status 09:13:24 INFO] acquire complete
[Status 09:13:24 INFO] writing housekeeping
[Sequencer 09:13:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:13:24 INFO] incremented U scene to 170 completed views
[Sequencer 09:13:24 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:13:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:13:24 INFO] incremented to [AERI set: name V170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:13:24 INFO] U170.SIG(18)
[sigmove 09:13:24 DEBUG] transformed U170Ma.SPC -> U170MA.SPC
[sigmove 09:13:24 DEBUG] transformed U170Mb.SPC -> U170MB.SPC
[sigmove 09:13:24 DEBUG] transformed U170Mc.SPC -> U170MC.SPC
[sigmove 09:13:24 DEBUG] transformed U170Md.SPC -> U170MD.SPC
[sigmove 09:13:24 DEBUG] transformed U170Me.SPC -> U170ME.SPC
[sigmove 09:13:24 DEBUG] transformed U170Mf.SPC -> U170MF.SPC
[Status 09:13:24 INFO] data for U170 transferred to science data processing
[Tidy 09:13:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:13:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:13:24 INFO] resetting WatchDogTimer
[Status 09:13:25 INFO] Starting Set [AERI set: name V170, 6 scans, 0 angle, D16300 command]
[Ingest 09:13:25 INFO] Sending XML status message
[Status 09:13:25 INFO] Mirror angle: 0
[Mirror 09:13:25 INFO] rotating to position V
[Status 09:13:25 INFO] .SET file for ACQ96 ready
[Ingest 09:13:25 INFO] Starting acquisition
[Status 09:13:26 INFO] reading housekeeping
[Status 09:13:44 INFO] acquire complete
[Status 09:13:45 INFO] writing housekeeping
[Sequencer 09:13:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:13:45 INFO] incremented V scene to 170 completed views
[Sequencer 09:13:45 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:13:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:13:45 INFO] incremented to [AERI set: name W170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:13:45 INFO] V170.SIG(18)
[sigmove 09:13:45 DEBUG] transformed V170Ma.SPC -> V170MA.SPC
[sigmove 09:13:45 DEBUG] transformed V170Mb.SPC -> V170MB.SPC
[sigmove 09:13:45 DEBUG] transformed V170Mc.SPC -> V170MC.SPC
[sigmove 09:13:45 DEBUG] transformed V170Md.SPC -> V170MD.SPC
[sigmove 09:13:45 DEBUG] transformed V170Me.SPC -> V170ME.SPC
[sigmove 09:13:45 DEBUG] transformed V170Mf.SPC -> V170MF.SPC
[Status 09:13:45 INFO] data for V170 transferred to science data processing
[Tidy 09:13:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:13:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:13:45 INFO] resetting WatchDogTimer
[Status 09:13:45 INFO] Starting Set [AERI set: name W170, 6 scans, 0 angle, D16300 command]
[Ingest 09:13:45 INFO] Sending XML status message
[Status 09:13:45 INFO] Mirror angle: 0
[Mirror 09:13:45 INFO] rotating to position W
[Status 09:13:45 INFO] .SET file for ACQ96 ready
[Ingest 09:13:46 INFO] Starting acquisition
[Status 09:13:46 INFO] reading housekeeping
[Status 09:14:04 INFO] acquire complete
[Status 09:14:05 INFO] writing housekeeping
[Sequencer 09:14:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:14:05 INFO] incremented W scene to 170 completed views
[Sequencer 09:14:05 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:14:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:14:05 INFO] incremented to [AERI set: name X170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:14:05 INFO] W170.SIG(18)
[sigmove 09:14:05 DEBUG] transformed W170Ma.SPC -> W170MA.SPC
[sigmove 09:14:05 DEBUG] transformed W170Mb.SPC -> W170MB.SPC
[sigmove 09:14:05 DEBUG] transformed W170Mc.SPC -> W170MC.SPC
[sigmove 09:14:05 DEBUG] transformed W170Md.SPC -> W170MD.SPC
[sigmove 09:14:05 DEBUG] transformed W170Me.SPC -> W170ME.SPC
[sigmove 09:14:05 DEBUG] transformed W170Mf.SPC -> W170MF.SPC
[Status 09:14:05 INFO] data for W170 transferred to science data processing
[Tidy 09:14:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:14:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:14:05 INFO] resetting WatchDogTimer
[Status 09:14:05 INFO] Starting Set [AERI set: name X170, 6 scans, 0 angle, D16300 command]
[Ingest 09:14:05 INFO] Sending XML status message
[Status 09:14:05 INFO] Mirror angle: 0
[Mirror 09:14:05 INFO] rotating to position X
[Status 09:14:06 INFO] .SET file for ACQ96 ready
[Ingest 09:14:06 INFO] Starting acquisition
[Status 09:14:06 INFO] reading housekeeping
[Status 09:14:24 INFO] acquire complete
[Status 09:14:25 INFO] writing housekeeping
[Sequencer 09:14:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:14:25 INFO] incremented X scene to 170 completed views
[Sequencer 09:14:25 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:14:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:14:25 INFO] incremented to [AERI set: name Y170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:14:25 INFO] X170.SIG(18)
[sigmove 09:14:25 DEBUG] transformed X170Ma.SPC -> X170MA.SPC
[sigmove 09:14:25 DEBUG] transformed X170Mb.SPC -> X170MB.SPC
[sigmove 09:14:25 DEBUG] transformed X170Mc.SPC -> X170MC.SPC
[sigmove 09:14:25 DEBUG] transformed X170Md.SPC -> X170MD.SPC
[sigmove 09:14:25 DEBUG] transformed X170Me.SPC -> X170ME.SPC
[sigmove 09:14:25 DEBUG] transformed X170Mf.SPC -> X170MF.SPC
[Status 09:14:25 INFO] data for X170 transferred to science data processing
[Tidy 09:14:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:14:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:14:25 INFO] resetting WatchDogTimer
[Status 09:14:25 INFO] Starting Set [AERI set: name Y170, 6 scans, 0 angle, D16300 command]
[Ingest 09:14:25 INFO] Sending XML status message
[Status 09:14:25 INFO] Mirror angle: 0
[Mirror 09:14:25 INFO] rotating to position Y
[Status 09:14:26 INFO] .SET file for ACQ96 ready
[Ingest 09:14:26 INFO] Starting acquisition
[Status 09:14:26 INFO] reading housekeeping
[Status 09:14:44 INFO] acquire complete
[Status 09:14:45 INFO] writing housekeeping
[Sequencer 09:14:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:14:45 INFO] incremented Y scene to 170 completed views
[Sequencer 09:14:45 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:14:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:14:45 INFO] incremented to [AERI set: name Z170, 6 scans, 0 angle, D16300 command] set
[sigmove 09:14:45 INFO] Y170.SIG(18)
[sigmove 09:14:45 DEBUG] transformed Y170Ma.SPC -> Y170MA.SPC
[sigmove 09:14:45 DEBUG] transformed Y170Mb.SPC -> Y170MB.SPC
[sigmove 09:14:45 DEBUG] transformed Y170Mc.SPC -> Y170MC.SPC
[sigmove 09:14:45 DEBUG] transformed Y170Md.SPC -> Y170MD.SPC
[sigmove 09:14:45 DEBUG] transformed Y170Me.SPC -> Y170ME.SPC
[sigmove 09:14:45 DEBUG] transformed Y170Mf.SPC -> Y170MF.SPC
[Status 09:14:45 INFO] data for Y170 transferred to science data processing
[Tidy 09:14:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:14:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:14:45 INFO] resetting WatchDogTimer
[Status 09:14:45 INFO] Starting Set [AERI set: name Z170, 6 scans, 0 angle, D16300 command]
[Ingest 09:14:45 INFO] Sending XML status message
[Status 09:14:45 INFO] Mirror angle: 0
[Mirror 09:14:46 INFO] rotating to position Z
[Status 09:14:46 INFO] .SET file for ACQ96 ready
[Ingest 09:14:46 INFO] Starting acquisition
[Status 09:14:46 INFO] reading housekeeping
[Status 09:15:05 INFO] acquire complete
[Status 09:15:05 INFO] writing housekeeping
[Sequencer 09:15:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:15:05 INFO] incremented Z scene to 170 completed views
[Sequencer 09:15:05 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:15:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:15:05 INFO] incremented to [AERI set: name H171, 6 scans, 60 angle, D22500 command] set
[sigmove 09:15:05 INFO] Z170.SIG(18)
[sigmove 09:15:05 DEBUG] transformed Z170Ma.SPC -> Z170MA.SPC
[sigmove 09:15:05 DEBUG] transformed Z170Mb.SPC -> Z170MB.SPC
[sigmove 09:15:05 DEBUG] transformed Z170Mc.SPC -> Z170MC.SPC
[sigmove 09:15:05 DEBUG] transformed Z170Md.SPC -> Z170MD.SPC
[sigmove 09:15:05 DEBUG] transformed Z170Me.SPC -> Z170ME.SPC
[sigmove 09:15:05 DEBUG] transformed Z170Mf.SPC -> Z170MF.SPC
[Status 09:15:05 INFO] data for Z170 transferred to science data processing
[Tidy 09:15:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:15:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:15:05 INFO] resetting WatchDogTimer
[Status 09:15:06 INFO] Starting Set [AERI set: name H171, 6 scans, 60 angle, D22500 command]
[Ingest 09:15:06 INFO] Sending XML status message
[Status 09:15:06 INFO] Mirror angle: 60
[Mirror 09:15:06 INFO] rotating to position H
[Status 09:15:07 INFO] .SET file for ACQ96 ready
[Ingest 09:15:07 INFO] Starting acquisition
[Status 09:15:07 INFO] reading housekeeping
[Status 09:15:25 INFO] acquire complete
[Status 09:15:26 INFO] writing housekeeping
[Sequencer 09:15:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:15:26 INFO] incremented H scene to 171 completed views
[Sequencer 09:15:26 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:15:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:15:26 INFO] incremented to [AERI set: name A171, 6 scans, 120 angle, D28300 command] set
[sigmove 09:15:26 INFO] H171.SIG(18)
[sigmove 09:15:26 DEBUG] transformed H171Ma.SPC -> H171MA.SPC
[sigmove 09:15:26 DEBUG] transformed H171Mb.SPC -> H171MB.SPC
[sigmove 09:15:26 DEBUG] transformed H171Mc.SPC -> H171MC.SPC
[sigmove 09:15:26 DEBUG] transformed H171Md.SPC -> H171MD.SPC
[sigmove 09:15:26 DEBUG] transformed H171Me.SPC -> H171ME.SPC
[sigmove 09:15:26 DEBUG] transformed H171Mf.SPC -> H171MF.SPC
[Status 09:15:26 INFO] data for H171 transferred to science data processing
[Tidy 09:15:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:15:26 INFO] A169.FIN(19),H169.FIN(19),S169.FIN(19),T169.FIN(19),U169.FIN(19),V169.FIN(19),W169.FIN(19),X169.FIN(19),Y169.FIN(19),Z169.FIN(19),A170.FIN(19),H170.FIN(19),S170.FIN(19),T170.FIN(19),U170.FIN(19),V170.FIN(19),W170.FIN(19),X170.FIN(19),Y170.FIN(19),Z170.FIN(19)
[sigmove 09:15:26 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:15:26 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:15:29 DEBUG] done zipping
[WatchDog 09:15:29 INFO] resetting WatchDogTimer
[Status 09:15:29 INFO] Starting Set [AERI set: name A171, 6 scans, 120 angle, D28300 command]
[Ingest 09:15:29 INFO] Sending XML status message
[Status 09:15:29 INFO] Mirror angle: 120
[Mirror 09:15:29 INFO] rotating to position A
[Status 09:15:30 INFO] .SET file for ACQ96 ready
[Ingest 09:15:30 INFO] Starting acquisition
[Status 09:15:31 INFO] reading housekeeping
[Status 09:15:48 INFO] acquire complete
[Status 09:15:49 INFO] writing housekeeping
[Sequencer 09:15:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:15:49 INFO] incremented A scene to 171 completed views
[Sequencer 09:15:49 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:15:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:15:49 INFO] incremented to [AERI set: name S171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:15:49 INFO] A171.SIG(18)
[sigmove 09:15:49 DEBUG] transformed A171Ma.SPC -> A171MA.SPC
[sigmove 09:15:49 DEBUG] transformed A171Mb.SPC -> A171MB.SPC
[sigmove 09:15:49 DEBUG] transformed A171Mc.SPC -> A171MC.SPC
[sigmove 09:15:49 DEBUG] transformed A171Md.SPC -> A171MD.SPC
[sigmove 09:15:49 DEBUG] transformed A171Me.SPC -> A171ME.SPC
[sigmove 09:15:49 DEBUG] transformed A171Mf.SPC -> A171MF.SPC
[Status 09:15:49 INFO] data for A171 transferred to science data processing
[Tidy 09:15:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:15:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:15:49 INFO] resetting WatchDogTimer
[Status 09:15:49 INFO] Starting Set [AERI set: name S171, 6 scans, 0 angle, D16300 command]
[Ingest 09:15:49 INFO] Sending XML status message
[Status 09:15:49 INFO] Mirror angle: 0
[Mirror 09:15:50 INFO] rotating to position S
[Status 09:15:51 INFO] .SET file for ACQ96 ready
[Ingest 09:15:51 INFO] Starting acquisition
[Status 09:15:51 INFO] reading housekeeping
[Status 09:16:10 INFO] acquire complete
[Status 09:16:10 INFO] writing housekeeping
[Sequencer 09:16:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:16:10 INFO] incremented S scene to 171 completed views
[Sequencer 09:16:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:16:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:16:10 INFO] incremented to [AERI set: name T171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:16:10 INFO] S171.SIG(18)
[sigmove 09:16:11 DEBUG] transformed S171Ma.SPC -> S171MA.SPC
[sigmove 09:16:11 DEBUG] transformed S171Mb.SPC -> S171MB.SPC
[sigmove 09:16:11 DEBUG] transformed S171Mc.SPC -> S171MC.SPC
[sigmove 09:16:11 DEBUG] transformed S171Md.SPC -> S171MD.SPC
[sigmove 09:16:11 DEBUG] transformed S171Me.SPC -> S171ME.SPC
[sigmove 09:16:11 DEBUG] transformed S171Mf.SPC -> S171MF.SPC
[Status 09:16:11 INFO] data for S171 transferred to science data processing
[Tidy 09:16:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:16:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:16:11 INFO] resetting WatchDogTimer
[Status 09:16:11 INFO] Starting Set [AERI set: name T171, 6 scans, 0 angle, D16300 command]
[Ingest 09:16:11 INFO] Sending XML status message
[Status 09:16:11 INFO] Mirror angle: 0
[Mirror 09:16:11 INFO] rotating to position T
[Status 09:16:11 INFO] .SET file for ACQ96 ready
[Ingest 09:16:12 INFO] Starting acquisition
[Status 09:16:12 INFO] reading housekeeping
[Status 09:16:30 INFO] acquire complete
[Status 09:16:31 INFO] writing housekeeping
[Sequencer 09:16:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:16:31 INFO] incremented T scene to 171 completed views
[Sequencer 09:16:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:16:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:16:31 INFO] incremented to [AERI set: name U171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:16:31 INFO] T171.SIG(18)
[sigmove 09:16:31 DEBUG] transformed T171Ma.SPC -> T171MA.SPC
[sigmove 09:16:31 DEBUG] transformed T171Mb.SPC -> T171MB.SPC
[sigmove 09:16:31 DEBUG] transformed T171Mc.SPC -> T171MC.SPC
[sigmove 09:16:31 DEBUG] transformed T171Md.SPC -> T171MD.SPC
[sigmove 09:16:31 DEBUG] transformed T171Me.SPC -> T171ME.SPC
[sigmove 09:16:31 DEBUG] transformed T171Mf.SPC -> T171MF.SPC
[Status 09:16:31 INFO] data for T171 transferred to science data processing
[Tidy 09:16:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:16:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:16:31 INFO] resetting WatchDogTimer
[Status 09:16:31 INFO] Starting Set [AERI set: name U171, 6 scans, 0 angle, D16300 command]
[Ingest 09:16:31 INFO] Sending XML status message
[Status 09:16:31 INFO] Mirror angle: 0
[Mirror 09:16:31 INFO] rotating to position U
[Status 09:16:31 INFO] .SET file for ACQ96 ready
[Ingest 09:16:32 INFO] Starting acquisition
[Status 09:16:32 INFO] reading housekeeping
[Status 09:16:50 INFO] acquire complete
[Status 09:16:51 INFO] writing housekeeping
[Sequencer 09:16:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:16:51 INFO] incremented U scene to 171 completed views
[Sequencer 09:16:51 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:16:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:16:51 INFO] incremented to [AERI set: name V171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:16:51 INFO] U171.SIG(18)
[sigmove 09:16:51 DEBUG] transformed U171Ma.SPC -> U171MA.SPC
[sigmove 09:16:51 DEBUG] transformed U171Mb.SPC -> U171MB.SPC
[sigmove 09:16:51 DEBUG] transformed U171Mc.SPC -> U171MC.SPC
[sigmove 09:16:51 DEBUG] transformed U171Md.SPC -> U171MD.SPC
[sigmove 09:16:51 DEBUG] transformed U171Me.SPC -> U171ME.SPC
[sigmove 09:16:51 DEBUG] transformed U171Mf.SPC -> U171MF.SPC
[Status 09:16:51 INFO] data for U171 transferred to science data processing
[Tidy 09:16:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:16:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:16:51 INFO] resetting WatchDogTimer
[Status 09:16:51 INFO] Starting Set [AERI set: name V171, 6 scans, 0 angle, D16300 command]
[Ingest 09:16:51 INFO] Sending XML status message
[Status 09:16:51 INFO] Mirror angle: 0
[Mirror 09:16:51 INFO] rotating to position V
[Status 09:16:52 INFO] .SET file for ACQ96 ready
[Ingest 09:16:52 INFO] Starting acquisition
[Status 09:16:52 INFO] reading housekeeping
[Status 09:17:10 INFO] acquire complete
[Status 09:17:11 INFO] writing housekeeping
[Sequencer 09:17:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:17:11 INFO] incremented V scene to 171 completed views
[Sequencer 09:17:11 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:17:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:17:11 INFO] incremented to [AERI set: name W171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:17:11 INFO] V171.SIG(18)
[sigmove 09:17:11 DEBUG] transformed V171Ma.SPC -> V171MA.SPC
[sigmove 09:17:11 DEBUG] transformed V171Mb.SPC -> V171MB.SPC
[sigmove 09:17:11 DEBUG] transformed V171Mc.SPC -> V171MC.SPC
[sigmove 09:17:11 DEBUG] transformed V171Md.SPC -> V171MD.SPC
[sigmove 09:17:11 DEBUG] transformed V171Me.SPC -> V171ME.SPC
[sigmove 09:17:11 DEBUG] transformed V171Mf.SPC -> V171MF.SPC
[Status 09:17:11 INFO] data for V171 transferred to science data processing
[Tidy 09:17:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:17:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:17:11 INFO] resetting WatchDogTimer
[Status 09:17:11 INFO] Starting Set [AERI set: name W171, 6 scans, 0 angle, D16300 command]
[Ingest 09:17:11 INFO] Sending XML status message
[Status 09:17:11 INFO] Mirror angle: 0
[Mirror 09:17:11 INFO] rotating to position W
[Status 09:17:12 INFO] .SET file for ACQ96 ready
[Ingest 09:17:12 INFO] Starting acquisition
[Status 09:17:12 INFO] reading housekeeping
[Status 09:17:30 INFO] acquire complete
[Status 09:17:31 INFO] writing housekeeping
[Sequencer 09:17:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:17:31 INFO] incremented W scene to 171 completed views
[Sequencer 09:17:31 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:17:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:17:31 INFO] incremented to [AERI set: name X171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:17:31 INFO] W171.SIG(18)
[sigmove 09:17:31 DEBUG] transformed W171Ma.SPC -> W171MA.SPC
[sigmove 09:17:31 DEBUG] transformed W171Mb.SPC -> W171MB.SPC
[sigmove 09:17:31 DEBUG] transformed W171Mc.SPC -> W171MC.SPC
[sigmove 09:17:31 DEBUG] transformed W171Md.SPC -> W171MD.SPC
[sigmove 09:17:31 DEBUG] transformed W171Me.SPC -> W171ME.SPC
[sigmove 09:17:31 DEBUG] transformed W171Mf.SPC -> W171MF.SPC
[Status 09:17:31 INFO] data for W171 transferred to science data processing
[Tidy 09:17:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:17:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:17:31 INFO] resetting WatchDogTimer
[Status 09:17:31 INFO] Starting Set [AERI set: name X171, 6 scans, 0 angle, D16300 command]
[Ingest 09:17:31 INFO] Sending XML status message
[Status 09:17:31 INFO] Mirror angle: 0
[Mirror 09:17:32 INFO] rotating to position X
[Status 09:17:32 INFO] .SET file for ACQ96 ready
[Ingest 09:17:32 INFO] Starting acquisition
[Status 09:17:32 INFO] reading housekeeping
[Status 09:17:54 INFO] acquire complete
[Status 09:17:55 INFO] writing housekeeping
[Sequencer 09:17:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:17:55 INFO] incremented X scene to 171 completed views
[Sequencer 09:17:55 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:17:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:17:55 INFO] incremented to [AERI set: name Y171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:17:55 INFO] X171.SIG(18)
[sigmove 09:17:55 DEBUG] transformed X171Ma.SPC -> X171MA.SPC
[sigmove 09:17:55 DEBUG] transformed X171Mb.SPC -> X171MB.SPC
[sigmove 09:17:55 DEBUG] transformed X171Mc.SPC -> X171MC.SPC
[sigmove 09:17:55 DEBUG] transformed X171Md.SPC -> X171MD.SPC
[sigmove 09:17:55 DEBUG] transformed X171Me.SPC -> X171ME.SPC
[sigmove 09:17:55 DEBUG] transformed X171Mf.SPC -> X171MF.SPC
[Status 09:17:55 INFO] data for X171 transferred to science data processing
[Tidy 09:17:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:17:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:17:55 INFO] resetting WatchDogTimer
[Status 09:17:55 INFO] Starting Set [AERI set: name Y171, 6 scans, 0 angle, D16300 command]
[Ingest 09:17:55 INFO] Sending XML status message
[Status 09:17:55 INFO] Mirror angle: 0
[Mirror 09:17:55 INFO] rotating to position Y
[Status 09:17:56 INFO] .SET file for ACQ96 ready
[Ingest 09:17:56 INFO] Starting acquisition
[Status 09:17:56 INFO] reading housekeeping
[Status 09:18:18 INFO] acquire complete
[Status 09:18:18 INFO] writing housekeeping
[Sequencer 09:18:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:18:18 INFO] incremented Y scene to 171 completed views
[Sequencer 09:18:18 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:18:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:18:18 INFO] incremented to [AERI set: name Z171, 6 scans, 0 angle, D16300 command] set
[sigmove 09:18:18 INFO] Y171.SIG(18)
[sigmove 09:18:18 DEBUG] transformed Y171Ma.SPC -> Y171MA.SPC
[sigmove 09:18:18 DEBUG] transformed Y171Mb.SPC -> Y171MB.SPC
[sigmove 09:18:18 DEBUG] transformed Y171Mc.SPC -> Y171MC.SPC
[sigmove 09:18:18 DEBUG] transformed Y171Md.SPC -> Y171MD.SPC
[sigmove 09:18:18 DEBUG] transformed Y171Me.SPC -> Y171ME.SPC
[sigmove 09:18:18 DEBUG] transformed Y171Mf.SPC -> Y171MF.SPC
[Status 09:18:18 INFO] data for Y171 transferred to science data processing
[Tidy 09:18:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:18:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:18:18 INFO] resetting WatchDogTimer
[Status 09:18:19 INFO] Starting Set [AERI set: name Z171, 6 scans, 0 angle, D16300 command]
[Ingest 09:18:19 INFO] Sending XML status message
[Status 09:18:19 INFO] Mirror angle: 0
[Mirror 09:18:19 INFO] rotating to position Z
[Status 09:18:19 INFO] .SET file for ACQ96 ready
[Ingest 09:18:19 INFO] Starting acquisition
[Status 09:18:20 INFO] reading housekeeping
[Status 09:18:38 INFO] acquire complete
[Status 09:18:38 INFO] writing housekeeping
[Sequencer 09:18:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:18:38 INFO] incremented Z scene to 171 completed views
[Sequencer 09:18:38 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:18:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:18:38 INFO] incremented to [AERI set: name A172, 6 scans, 120 angle, D28300 command] set
[sigmove 09:18:38 INFO] Z171.SIG(18)
[sigmove 09:18:38 DEBUG] transformed Z171Ma.SPC -> Z171MA.SPC
[sigmove 09:18:38 DEBUG] transformed Z171Mb.SPC -> Z171MB.SPC
[sigmove 09:18:38 DEBUG] transformed Z171Mc.SPC -> Z171MC.SPC
[sigmove 09:18:38 DEBUG] transformed Z171Md.SPC -> Z171MD.SPC
[sigmove 09:18:38 DEBUG] transformed Z171Me.SPC -> Z171ME.SPC
[sigmove 09:18:38 DEBUG] transformed Z171Mf.SPC -> Z171MF.SPC
[Status 09:18:38 INFO] data for Z171 transferred to science data processing
[Tidy 09:18:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:18:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:18:38 INFO] resetting WatchDogTimer
[Status 09:18:39 INFO] Starting Set [AERI set: name A172, 6 scans, 120 angle, D28300 command]
[Ingest 09:18:39 INFO] Sending XML status message
[Status 09:18:39 INFO] Mirror angle: 120
[Mirror 09:18:39 INFO] rotating to position A
[Status 09:18:40 INFO] .SET file for ACQ96 ready
[Ingest 09:18:41 INFO] Starting acquisition
[Status 09:18:41 INFO] reading housekeeping
[Status 09:18:59 INFO] acquire complete
[Status 09:19:00 INFO] writing housekeeping
[Sequencer 09:19:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:19:00 INFO] incremented A scene to 172 completed views
[Sequencer 09:19:00 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:19:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:19:00 INFO] incremented to [AERI set: name H172, 6 scans, 60 angle, D22500 command] set
[sigmove 09:19:00 INFO] A172.SIG(18)
[sigmove 09:19:00 DEBUG] transformed A172Ma.SPC -> A172MA.SPC
[sigmove 09:19:00 DEBUG] transformed A172Mb.SPC -> A172MB.SPC
[sigmove 09:19:00 DEBUG] transformed A172Mc.SPC -> A172MC.SPC
[sigmove 09:19:00 DEBUG] transformed A172Md.SPC -> A172MD.SPC
[sigmove 09:19:00 DEBUG] transformed A172Me.SPC -> A172ME.SPC
[sigmove 09:19:00 DEBUG] transformed A172Mf.SPC -> A172MF.SPC
[Status 09:19:00 INFO] data for A172 transferred to science data processing
[Tidy 09:19:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:19:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:19:00 INFO] resetting WatchDogTimer
[Status 09:19:00 INFO] Starting Set [AERI set: name H172, 6 scans, 60 angle, D22500 command]
[Ingest 09:19:00 INFO] Sending XML status message
[Status 09:19:00 INFO] Mirror angle: 60
[Mirror 09:19:00 INFO] rotating to position H
[Status 09:19:01 INFO] .SET file for ACQ96 ready
[Ingest 09:19:01 INFO] Starting acquisition
[Status 09:19:02 INFO] reading housekeeping
[Status 09:19:19 INFO] acquire complete
[Status 09:19:20 INFO] writing housekeeping
[Sequencer 09:19:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:19:20 INFO] incremented H scene to 172 completed views
[Sequencer 09:19:20 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:19:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:19:20 INFO] incremented to [AERI set: name S172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:19:20 INFO] H172.SIG(18)
[sigmove 09:19:20 DEBUG] transformed H172Ma.SPC -> H172MA.SPC
[sigmove 09:19:20 DEBUG] transformed H172Mb.SPC -> H172MB.SPC
[sigmove 09:19:20 DEBUG] transformed H172Mc.SPC -> H172MC.SPC
[sigmove 09:19:20 DEBUG] transformed H172Md.SPC -> H172MD.SPC
[sigmove 09:19:20 DEBUG] transformed H172Me.SPC -> H172ME.SPC
[sigmove 09:19:20 DEBUG] transformed H172Mf.SPC -> H172MF.SPC
[Status 09:19:20 INFO] data for H172 transferred to science data processing
[Tidy 09:19:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:19:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:19:20 INFO] resetting WatchDogTimer
[Status 09:19:20 INFO] Starting Set [AERI set: name S172, 6 scans, 0 angle, D16300 command]
[Ingest 09:19:20 INFO] Sending XML status message
[Status 09:19:20 INFO] Mirror angle: 0
[Mirror 09:19:20 INFO] rotating to position S
[Status 09:19:21 INFO] .SET file for ACQ96 ready
[Ingest 09:19:22 INFO] Starting acquisition
[Status 09:19:22 INFO] reading housekeeping
[Status 09:19:39 INFO] acquire complete
[Status 09:19:40 INFO] writing housekeeping
[Sequencer 09:19:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:19:40 INFO] incremented S scene to 172 completed views
[Sequencer 09:19:40 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:19:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:19:40 INFO] incremented to [AERI set: name T172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:19:40 INFO] S172.SIG(18)
[sigmove 09:19:40 DEBUG] transformed S172Ma.SPC -> S172MA.SPC
[sigmove 09:19:40 DEBUG] transformed S172Mb.SPC -> S172MB.SPC
[sigmove 09:19:40 DEBUG] transformed S172Mc.SPC -> S172MC.SPC
[sigmove 09:19:40 DEBUG] transformed S172Md.SPC -> S172MD.SPC
[sigmove 09:19:40 DEBUG] transformed S172Me.SPC -> S172ME.SPC
[sigmove 09:19:40 DEBUG] transformed S172Mf.SPC -> S172MF.SPC
[Status 09:19:40 INFO] data for S172 transferred to science data processing
[Tidy 09:19:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:19:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:19:40 INFO] resetting WatchDogTimer
[Status 09:19:40 INFO] Starting Set [AERI set: name T172, 6 scans, 0 angle, D16300 command]
[Ingest 09:19:40 INFO] Sending XML status message
[Status 09:19:40 INFO] Mirror angle: 0
[Mirror 09:19:41 INFO] rotating to position T
[Status 09:19:41 INFO] .SET file for ACQ96 ready
[Ingest 09:19:41 INFO] Starting acquisition
[Status 09:19:41 INFO] reading housekeeping
[Status 09:20:00 INFO] acquire complete
[Status 09:20:00 INFO] writing housekeeping
[Sequencer 09:20:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:20:00 INFO] incremented T scene to 172 completed views
[Sequencer 09:20:00 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:20:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:20:00 INFO] incremented to [AERI set: name U172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:20:00 INFO] T172.SIG(18)
[sigmove 09:20:00 DEBUG] transformed T172Ma.SPC -> T172MA.SPC
[sigmove 09:20:00 DEBUG] transformed T172Mb.SPC -> T172MB.SPC
[sigmove 09:20:00 DEBUG] transformed T172Mc.SPC -> T172MC.SPC
[sigmove 09:20:00 DEBUG] transformed T172Md.SPC -> T172MD.SPC
[sigmove 09:20:00 DEBUG] transformed T172Me.SPC -> T172ME.SPC
[sigmove 09:20:00 DEBUG] transformed T172Mf.SPC -> T172MF.SPC
[Status 09:20:00 INFO] data for T172 transferred to science data processing
[Tidy 09:20:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:20:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:20:00 INFO] resetting WatchDogTimer
[Status 09:20:01 INFO] Starting Set [AERI set: name U172, 6 scans, 0 angle, D16300 command]
[Ingest 09:20:01 INFO] Sending XML status message
[Status 09:20:01 INFO] Mirror angle: 0
[Mirror 09:20:01 INFO] rotating to position U
[Status 09:20:01 INFO] .SET file for ACQ96 ready
[Ingest 09:20:01 INFO] Starting acquisition
[Status 09:20:02 INFO] reading housekeeping
[Status 09:20:20 INFO] acquire complete
[Status 09:20:21 INFO] writing housekeeping
[Sequencer 09:20:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:20:21 INFO] incremented U scene to 172 completed views
[Sequencer 09:20:21 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:20:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:20:21 INFO] incremented to [AERI set: name V172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:20:21 INFO] U172.SIG(18)
[sigmove 09:20:21 DEBUG] transformed U172Ma.SPC -> U172MA.SPC
[sigmove 09:20:21 DEBUG] transformed U172Mb.SPC -> U172MB.SPC
[sigmove 09:20:21 DEBUG] transformed U172Mc.SPC -> U172MC.SPC
[sigmove 09:20:21 DEBUG] transformed U172Md.SPC -> U172MD.SPC
[sigmove 09:20:21 DEBUG] transformed U172Me.SPC -> U172ME.SPC
[sigmove 09:20:21 DEBUG] transformed U172Mf.SPC -> U172MF.SPC
[Status 09:20:21 INFO] data for U172 transferred to science data processing
[Tidy 09:20:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:20:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:20:21 INFO] resetting WatchDogTimer
[Status 09:20:21 INFO] Starting Set [AERI set: name V172, 6 scans, 0 angle, D16300 command]
[Ingest 09:20:21 INFO] Sending XML status message
[Status 09:20:21 INFO] Mirror angle: 0
[Mirror 09:20:21 INFO] rotating to position V
[Status 09:20:21 INFO] .SET file for ACQ96 ready
[Ingest 09:20:22 INFO] Starting acquisition
[Status 09:20:22 INFO] reading housekeeping
[Status 09:20:40 INFO] acquire complete
[Status 09:20:41 INFO] writing housekeeping
[Sequencer 09:20:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:20:41 INFO] incremented V scene to 172 completed views
[Sequencer 09:20:41 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:20:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:20:41 INFO] incremented to [AERI set: name W172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:20:41 INFO] V172.SIG(18)
[sigmove 09:20:41 DEBUG] transformed V172Ma.SPC -> V172MA.SPC
[sigmove 09:20:41 DEBUG] transformed V172Mb.SPC -> V172MB.SPC
[sigmove 09:20:41 DEBUG] transformed V172Mc.SPC -> V172MC.SPC
[sigmove 09:20:41 DEBUG] transformed V172Md.SPC -> V172MD.SPC
[sigmove 09:20:41 DEBUG] transformed V172Me.SPC -> V172ME.SPC
[sigmove 09:20:41 DEBUG] transformed V172Mf.SPC -> V172MF.SPC
[Status 09:20:41 INFO] data for V172 transferred to science data processing
[Tidy 09:20:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:20:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:20:41 INFO] resetting WatchDogTimer
[Status 09:20:41 INFO] Starting Set [AERI set: name W172, 6 scans, 0 angle, D16300 command]
[Ingest 09:20:41 INFO] Sending XML status message
[Status 09:20:41 INFO] Mirror angle: 0
[Mirror 09:20:41 INFO] rotating to position W
[Status 09:20:42 INFO] .SET file for ACQ96 ready
[Ingest 09:20:42 INFO] Starting acquisition
[Status 09:20:42 INFO] reading housekeeping
[Status 09:21:00 INFO] acquire complete
[Status 09:21:01 INFO] writing housekeeping
[Sequencer 09:21:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:21:01 INFO] incremented W scene to 172 completed views
[Sequencer 09:21:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:21:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:21:01 INFO] incremented to [AERI set: name X172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:21:01 INFO] W172.SIG(18)
[sigmove 09:21:01 DEBUG] transformed W172Ma.SPC -> W172MA.SPC
[sigmove 09:21:01 DEBUG] transformed W172Mb.SPC -> W172MB.SPC
[sigmove 09:21:01 DEBUG] transformed W172Mc.SPC -> W172MC.SPC
[sigmove 09:21:01 DEBUG] transformed W172Md.SPC -> W172MD.SPC
[sigmove 09:21:01 DEBUG] transformed W172Me.SPC -> W172ME.SPC
[sigmove 09:21:01 DEBUG] transformed W172Mf.SPC -> W172MF.SPC
[Status 09:21:01 INFO] data for W172 transferred to science data processing
[Tidy 09:21:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:21:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:21:01 INFO] resetting WatchDogTimer
[Status 09:21:01 INFO] Starting Set [AERI set: name X172, 6 scans, 0 angle, D16300 command]
[Ingest 09:21:01 INFO] Sending XML status message
[Status 09:21:01 INFO] Mirror angle: 0
[Mirror 09:21:01 INFO] rotating to position X
[Status 09:21:02 INFO] .SET file for ACQ96 ready
[Ingest 09:21:02 INFO] Starting acquisition
[Status 09:21:02 INFO] reading housekeeping
[Status 09:21:20 INFO] acquire complete
[Status 09:21:21 INFO] writing housekeeping
[Sequencer 09:21:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:21:21 INFO] incremented X scene to 172 completed views
[Sequencer 09:21:21 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:21:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:21:21 INFO] incremented to [AERI set: name Y172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:21:21 INFO] X172.SIG(18)
[sigmove 09:21:21 DEBUG] transformed X172Ma.SPC -> X172MA.SPC
[sigmove 09:21:21 DEBUG] transformed X172Mb.SPC -> X172MB.SPC
[sigmove 09:21:21 DEBUG] transformed X172Mc.SPC -> X172MC.SPC
[sigmove 09:21:21 DEBUG] transformed X172Md.SPC -> X172MD.SPC
[sigmove 09:21:21 DEBUG] transformed X172Me.SPC -> X172ME.SPC
[sigmove 09:21:21 DEBUG] transformed X172Mf.SPC -> X172MF.SPC
[Status 09:21:21 INFO] data for X172 transferred to science data processing
[Tidy 09:21:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:21:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:21:21 INFO] resetting WatchDogTimer
[Status 09:21:21 INFO] Starting Set [AERI set: name Y172, 6 scans, 0 angle, D16300 command]
[Ingest 09:21:21 INFO] Sending XML status message
[Status 09:21:21 INFO] Mirror angle: 0
[Mirror 09:21:22 INFO] rotating to position Y
[Status 09:21:22 INFO] .SET file for ACQ96 ready
[Ingest 09:21:22 INFO] Starting acquisition
[Status 09:21:22 INFO] reading housekeeping
[Status 09:21:41 INFO] acquire complete
[Status 09:21:41 INFO] writing housekeeping
[Sequencer 09:21:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:21:41 INFO] incremented Y scene to 172 completed views
[Sequencer 09:21:41 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:21:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:21:41 INFO] incremented to [AERI set: name Z172, 6 scans, 0 angle, D16300 command] set
[sigmove 09:21:41 INFO] Y172.SIG(18)
[sigmove 09:21:41 DEBUG] transformed Y172Ma.SPC -> Y172MA.SPC
[sigmove 09:21:41 DEBUG] transformed Y172Mb.SPC -> Y172MB.SPC
[sigmove 09:21:41 DEBUG] transformed Y172Mc.SPC -> Y172MC.SPC
[sigmove 09:21:41 DEBUG] transformed Y172Md.SPC -> Y172MD.SPC
[sigmove 09:21:41 DEBUG] transformed Y172Me.SPC -> Y172ME.SPC
[sigmove 09:21:41 DEBUG] transformed Y172Mf.SPC -> Y172MF.SPC
[Status 09:21:41 INFO] data for Y172 transferred to science data processing
[Tidy 09:21:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:21:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:21:41 INFO] resetting WatchDogTimer
[Status 09:21:42 INFO] Starting Set [AERI set: name Z172, 6 scans, 0 angle, D16300 command]
[Ingest 09:21:42 INFO] Sending XML status message
[Status 09:21:42 INFO] Mirror angle: 0
[Mirror 09:21:42 INFO] rotating to position Z
[Status 09:21:42 INFO] .SET file for ACQ96 ready
[Ingest 09:21:42 INFO] Starting acquisition
[Status 09:21:43 INFO] reading housekeeping
[Status 09:22:01 INFO] acquire complete
[Status 09:22:01 INFO] writing housekeeping
[Sequencer 09:22:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:22:01 INFO] incremented Z scene to 172 completed views
[Sequencer 09:22:01 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:22:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:22:01 INFO] incremented to [AERI set: name H173, 6 scans, 60 angle, D22500 command] set
[sigmove 09:22:01 INFO] Z172.SIG(18)
[sigmove 09:22:02 DEBUG] transformed Z172Ma.SPC -> Z172MA.SPC
[sigmove 09:22:02 DEBUG] transformed Z172Mb.SPC -> Z172MB.SPC
[sigmove 09:22:02 DEBUG] transformed Z172Mc.SPC -> Z172MC.SPC
[sigmove 09:22:02 DEBUG] transformed Z172Md.SPC -> Z172MD.SPC
[sigmove 09:22:02 DEBUG] transformed Z172Me.SPC -> Z172ME.SPC
[sigmove 09:22:02 DEBUG] transformed Z172Mf.SPC -> Z172MF.SPC
[Status 09:22:02 INFO] data for Z172 transferred to science data processing
[Tidy 09:22:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:22:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:22:02 INFO] resetting WatchDogTimer
[Status 09:22:02 INFO] Starting Set [AERI set: name H173, 6 scans, 60 angle, D22500 command]
[Ingest 09:22:02 INFO] Sending XML status message
[Status 09:22:02 INFO] Mirror angle: 60
[Mirror 09:22:02 INFO] rotating to position H
[Status 09:22:03 INFO] .SET file for ACQ96 ready
[Ingest 09:22:03 INFO] Starting acquisition
[Status 09:22:03 INFO] reading housekeeping
[Status 09:22:21 INFO] acquire complete
[Status 09:22:22 INFO] writing housekeeping
[Sequencer 09:22:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:22:22 INFO] incremented H scene to 173 completed views
[Sequencer 09:22:22 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:22:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:22:22 INFO] incremented to [AERI set: name A173, 6 scans, 120 angle, D28300 command] set
[sigmove 09:22:22 INFO] H173.SIG(18)
[sigmove 09:22:22 DEBUG] transformed H173Ma.SPC -> H173MA.SPC
[sigmove 09:22:22 DEBUG] transformed H173Mb.SPC -> H173MB.SPC
[sigmove 09:22:22 DEBUG] transformed H173Mc.SPC -> H173MC.SPC
[sigmove 09:22:22 DEBUG] transformed H173Md.SPC -> H173MD.SPC
[sigmove 09:22:22 DEBUG] transformed H173Me.SPC -> H173ME.SPC
[sigmove 09:22:22 DEBUG] transformed H173Mf.SPC -> H173MF.SPC
[Status 09:22:22 INFO] data for H173 transferred to science data processing
[Tidy 09:22:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:22:22 INFO] A171.FIN(19),H171.FIN(19),S171.FIN(19),T171.FIN(19),U171.FIN(19),V171.FIN(19),W171.FIN(19),X171.FIN(19),Y171.FIN(19),Z171.FIN(19),A172.FIN(19),H172.FIN(19),S172.FIN(19),T172.FIN(19),U172.FIN(19),V172.FIN(19),W172.FIN(19),X172.FIN(19),Y172.FIN(19),Z172.FIN(19)
[sigmove 09:22:22 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:22:22 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:22:25 DEBUG] done zipping
[WatchDog 09:22:25 INFO] resetting WatchDogTimer
[Status 09:22:25 INFO] Starting Set [AERI set: name A173, 6 scans, 120 angle, D28300 command]
[Ingest 09:22:25 INFO] Sending XML status message
[Status 09:22:25 INFO] Mirror angle: 120
[Mirror 09:22:26 INFO] rotating to position A
[Status 09:22:27 INFO] .SET file for ACQ96 ready
[Ingest 09:22:27 INFO] Starting acquisition
[Status 09:22:27 INFO] reading housekeeping
[Status 09:22:45 INFO] acquire complete
[Status 09:22:45 INFO] writing housekeeping
[Sequencer 09:22:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:22:45 INFO] incremented A scene to 173 completed views
[Sequencer 09:22:45 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:22:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:22:45 INFO] incremented to [AERI set: name S173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:22:45 INFO] A173.SIG(18)
[sigmove 09:22:45 DEBUG] transformed A173Ma.SPC -> A173MA.SPC
[sigmove 09:22:45 DEBUG] transformed A173Mb.SPC -> A173MB.SPC
[sigmove 09:22:45 DEBUG] transformed A173Mc.SPC -> A173MC.SPC
[sigmove 09:22:45 DEBUG] transformed A173Md.SPC -> A173MD.SPC
[sigmove 09:22:45 DEBUG] transformed A173Me.SPC -> A173ME.SPC
[sigmove 09:22:45 DEBUG] transformed A173Mf.SPC -> A173MF.SPC
[Status 09:22:45 INFO] data for A173 transferred to science data processing
[Tidy 09:22:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:22:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:22:45 INFO] resetting WatchDogTimer
[Status 09:22:46 INFO] Starting Set [AERI set: name S173, 6 scans, 0 angle, D16300 command]
[Ingest 09:22:46 INFO] Sending XML status message
[Status 09:22:46 INFO] Mirror angle: 0
[Mirror 09:22:46 INFO] rotating to position S
[Status 09:22:47 INFO] .SET file for ACQ96 ready
[Ingest 09:22:47 INFO] Starting acquisition
[Status 09:22:48 INFO] reading housekeeping
[Status 09:23:06 INFO] acquire complete
[Status 09:23:07 INFO] writing housekeeping
[Sequencer 09:23:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:23:07 INFO] incremented S scene to 173 completed views
[Sequencer 09:23:07 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:23:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:23:07 INFO] incremented to [AERI set: name T173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:23:07 INFO] S173.SIG(18)
[sigmove 09:23:07 DEBUG] transformed S173Ma.SPC -> S173MA.SPC
[sigmove 09:23:07 DEBUG] transformed S173Mb.SPC -> S173MB.SPC
[sigmove 09:23:07 DEBUG] transformed S173Mc.SPC -> S173MC.SPC
[sigmove 09:23:07 DEBUG] transformed S173Md.SPC -> S173MD.SPC
[sigmove 09:23:07 DEBUG] transformed S173Me.SPC -> S173ME.SPC
[sigmove 09:23:07 DEBUG] transformed S173Mf.SPC -> S173MF.SPC
[Status 09:23:07 INFO] data for S173 transferred to science data processing
[Tidy 09:23:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:23:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:23:07 INFO] resetting WatchDogTimer
[Status 09:23:07 INFO] Starting Set [AERI set: name T173, 6 scans, 0 angle, D16300 command]
[Ingest 09:23:07 INFO] Sending XML status message
[Status 09:23:07 INFO] Mirror angle: 0
[Mirror 09:23:07 INFO] rotating to position T
[Status 09:23:08 INFO] .SET file for ACQ96 ready
[Ingest 09:23:08 INFO] Starting acquisition
[Status 09:23:08 INFO] reading housekeeping
[Status 09:23:26 INFO] acquire complete
[Status 09:23:27 INFO] writing housekeeping
[Sequencer 09:23:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:23:27 INFO] incremented T scene to 173 completed views
[Sequencer 09:23:27 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:23:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:23:27 INFO] incremented to [AERI set: name U173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:23:27 INFO] T173.SIG(18)
[sigmove 09:23:27 DEBUG] transformed T173Ma.SPC -> T173MA.SPC
[sigmove 09:23:27 DEBUG] transformed T173Mb.SPC -> T173MB.SPC
[sigmove 09:23:27 DEBUG] transformed T173Mc.SPC -> T173MC.SPC
[sigmove 09:23:27 DEBUG] transformed T173Md.SPC -> T173MD.SPC
[sigmove 09:23:27 DEBUG] transformed T173Me.SPC -> T173ME.SPC
[sigmove 09:23:27 DEBUG] transformed T173Mf.SPC -> T173MF.SPC
[Status 09:23:27 INFO] data for T173 transferred to science data processing
[Tidy 09:23:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:23:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:23:27 INFO] resetting WatchDogTimer
[Status 09:23:27 INFO] Starting Set [AERI set: name U173, 6 scans, 0 angle, D16300 command]
[Ingest 09:23:27 INFO] Sending XML status message
[Status 09:23:27 INFO] Mirror angle: 0
[Mirror 09:23:27 INFO] rotating to position U
[Status 09:23:28 INFO] .SET file for ACQ96 ready
[Ingest 09:23:28 INFO] Starting acquisition
[Status 09:23:28 INFO] reading housekeeping
[Status 09:23:46 INFO] acquire complete
[Status 09:23:47 INFO] writing housekeeping
[Sequencer 09:23:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:23:47 INFO] incremented U scene to 173 completed views
[Sequencer 09:23:47 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:23:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:23:47 INFO] incremented to [AERI set: name V173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:23:47 INFO] U173.SIG(18)
[sigmove 09:23:47 DEBUG] transformed U173Ma.SPC -> U173MA.SPC
[sigmove 09:23:47 DEBUG] transformed U173Mb.SPC -> U173MB.SPC
[sigmove 09:23:47 DEBUG] transformed U173Mc.SPC -> U173MC.SPC
[sigmove 09:23:47 DEBUG] transformed U173Md.SPC -> U173MD.SPC
[sigmove 09:23:47 DEBUG] transformed U173Me.SPC -> U173ME.SPC
[sigmove 09:23:47 DEBUG] transformed U173Mf.SPC -> U173MF.SPC
[Status 09:23:47 INFO] data for U173 transferred to science data processing
[Tidy 09:23:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:23:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:23:47 INFO] resetting WatchDogTimer
[Status 09:23:47 INFO] Starting Set [AERI set: name V173, 6 scans, 0 angle, D16300 command]
[Ingest 09:23:47 INFO] Sending XML status message
[Status 09:23:47 INFO] Mirror angle: 0
[Mirror 09:23:48 INFO] rotating to position V
[Status 09:23:48 INFO] .SET file for ACQ96 ready
[Ingest 09:23:48 INFO] Starting acquisition
[Status 09:23:48 INFO] reading housekeeping
[Status 09:24:10 INFO] acquire complete
[Status 09:24:11 INFO] writing housekeeping
[Sequencer 09:24:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:24:11 INFO] incremented V scene to 173 completed views
[Sequencer 09:24:11 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:24:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:24:11 INFO] incremented to [AERI set: name W173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:24:11 INFO] V173.SIG(18)
[sigmove 09:24:11 DEBUG] transformed V173Ma.SPC -> V173MA.SPC
[sigmove 09:24:11 DEBUG] transformed V173Mb.SPC -> V173MB.SPC
[sigmove 09:24:11 DEBUG] transformed V173Mc.SPC -> V173MC.SPC
[sigmove 09:24:11 DEBUG] transformed V173Md.SPC -> V173MD.SPC
[sigmove 09:24:11 DEBUG] transformed V173Me.SPC -> V173ME.SPC
[sigmove 09:24:11 DEBUG] transformed V173Mf.SPC -> V173MF.SPC
[Status 09:24:11 INFO] data for V173 transferred to science data processing
[Tidy 09:24:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:24:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:24:11 INFO] resetting WatchDogTimer
[Status 09:24:11 INFO] Starting Set [AERI set: name W173, 6 scans, 0 angle, D16300 command]
[Ingest 09:24:11 INFO] Sending XML status message
[Status 09:24:11 INFO] Mirror angle: 0
[Mirror 09:24:11 INFO] rotating to position W
[Status 09:24:11 INFO] .SET file for ACQ96 ready
[Ingest 09:24:12 INFO] Starting acquisition
[Status 09:24:12 INFO] reading housekeeping
[Status 09:24:30 INFO] acquire complete
[Status 09:24:31 INFO] writing housekeeping
[Sequencer 09:24:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:24:31 INFO] incremented W scene to 173 completed views
[Sequencer 09:24:31 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:24:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:24:31 INFO] incremented to [AERI set: name X173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:24:31 INFO] W173.SIG(18)
[sigmove 09:24:31 DEBUG] transformed W173Ma.SPC -> W173MA.SPC
[sigmove 09:24:31 DEBUG] transformed W173Mb.SPC -> W173MB.SPC
[sigmove 09:24:31 DEBUG] transformed W173Mc.SPC -> W173MC.SPC
[sigmove 09:24:31 DEBUG] transformed W173Md.SPC -> W173MD.SPC
[sigmove 09:24:31 DEBUG] transformed W173Me.SPC -> W173ME.SPC
[sigmove 09:24:31 DEBUG] transformed W173Mf.SPC -> W173MF.SPC
[Status 09:24:31 INFO] data for W173 transferred to science data processing
[Tidy 09:24:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:24:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:24:31 INFO] resetting WatchDogTimer
[Status 09:24:31 INFO] Starting Set [AERI set: name X173, 6 scans, 0 angle, D16300 command]
[Ingest 09:24:31 INFO] Sending XML status message
[Status 09:24:31 INFO] Mirror angle: 0
[Mirror 09:24:31 INFO] rotating to position X
[Status 09:24:32 INFO] .SET file for ACQ96 ready
[Ingest 09:24:32 INFO] Starting acquisition
[Status 09:24:32 INFO] reading housekeeping
[Status 09:24:50 INFO] acquire complete
[Status 09:24:51 INFO] writing housekeeping
[Sequencer 09:24:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:24:51 INFO] incremented X scene to 173 completed views
[Sequencer 09:24:51 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:24:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:24:51 INFO] incremented to [AERI set: name Y173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:24:51 INFO] X173.SIG(18)
[sigmove 09:24:51 DEBUG] transformed X173Ma.SPC -> X173MA.SPC
[sigmove 09:24:51 DEBUG] transformed X173Mb.SPC -> X173MB.SPC
[sigmove 09:24:51 DEBUG] transformed X173Mc.SPC -> X173MC.SPC
[sigmove 09:24:51 DEBUG] transformed X173Md.SPC -> X173MD.SPC
[sigmove 09:24:51 DEBUG] transformed X173Me.SPC -> X173ME.SPC
[sigmove 09:24:51 DEBUG] transformed X173Mf.SPC -> X173MF.SPC
[Status 09:24:51 INFO] data for X173 transferred to science data processing
[Tidy 09:24:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:24:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:24:51 INFO] resetting WatchDogTimer
[Status 09:24:51 INFO] Starting Set [AERI set: name Y173, 6 scans, 0 angle, D16300 command]
[Ingest 09:24:51 INFO] Sending XML status message
[Status 09:24:51 INFO] Mirror angle: 0
[Mirror 09:24:51 INFO] rotating to position Y
[Status 09:24:52 INFO] .SET file for ACQ96 ready
[Ingest 09:24:52 INFO] Starting acquisition
[Status 09:24:52 INFO] reading housekeeping
[Status 09:25:10 INFO] acquire complete
[Status 09:25:11 INFO] writing housekeeping
[Sequencer 09:25:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:25:11 INFO] incremented Y scene to 173 completed views
[Sequencer 09:25:11 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:25:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:25:11 INFO] incremented to [AERI set: name Z173, 6 scans, 0 angle, D16300 command] set
[sigmove 09:25:11 INFO] Y173.SIG(18)
[sigmove 09:25:11 DEBUG] transformed Y173Ma.SPC -> Y173MA.SPC
[sigmove 09:25:11 DEBUG] transformed Y173Mb.SPC -> Y173MB.SPC
[sigmove 09:25:11 DEBUG] transformed Y173Mc.SPC -> Y173MC.SPC
[sigmove 09:25:11 DEBUG] transformed Y173Md.SPC -> Y173MD.SPC
[sigmove 09:25:11 DEBUG] transformed Y173Me.SPC -> Y173ME.SPC
[sigmove 09:25:11 DEBUG] transformed Y173Mf.SPC -> Y173MF.SPC
[Status 09:25:11 INFO] data for Y173 transferred to science data processing
[Tidy 09:25:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:25:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:25:11 INFO] resetting WatchDogTimer
[Status 09:25:11 INFO] Starting Set [AERI set: name Z173, 6 scans, 0 angle, D16300 command]
[Ingest 09:25:11 INFO] Sending XML status message
[Status 09:25:11 INFO] Mirror angle: 0
[Mirror 09:25:12 INFO] rotating to position Z
[Status 09:25:12 INFO] .SET file for ACQ96 ready
[Ingest 09:25:12 INFO] Starting acquisition
[Status 09:25:12 INFO] reading housekeeping
[Status 09:25:31 INFO] acquire complete
[Status 09:25:31 INFO] writing housekeeping
[Sequencer 09:25:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:25:31 INFO] incremented Z scene to 173 completed views
[Sequencer 09:25:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:25:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:25:31 INFO] incremented to [AERI set: name A174, 6 scans, 120 angle, D28300 command] set
[sigmove 09:25:31 INFO] Z173.SIG(18)
[sigmove 09:25:31 DEBUG] transformed Z173Ma.SPC -> Z173MA.SPC
[sigmove 09:25:31 DEBUG] transformed Z173Mb.SPC -> Z173MB.SPC
[sigmove 09:25:31 DEBUG] transformed Z173Mc.SPC -> Z173MC.SPC
[sigmove 09:25:31 DEBUG] transformed Z173Md.SPC -> Z173MD.SPC
[sigmove 09:25:31 DEBUG] transformed Z173Me.SPC -> Z173ME.SPC
[sigmove 09:25:31 DEBUG] transformed Z173Mf.SPC -> Z173MF.SPC
[Status 09:25:31 INFO] data for Z173 transferred to science data processing
[Tidy 09:25:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:25:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:25:31 INFO] resetting WatchDogTimer
[Status 09:25:32 INFO] Starting Set [AERI set: name A174, 6 scans, 120 angle, D28300 command]
[Ingest 09:25:32 INFO] Sending XML status message
[Status 09:25:32 INFO] Mirror angle: 120
[Mirror 09:25:32 INFO] rotating to position A
[Status 09:25:33 INFO] .SET file for ACQ96 ready
[Ingest 09:25:33 INFO] Starting acquisition
[Status 09:25:34 INFO] reading housekeeping
[Status 09:25:52 INFO] acquire complete
[Status 09:25:53 INFO] writing housekeeping
[Sequencer 09:25:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:25:53 INFO] incremented A scene to 174 completed views
[Sequencer 09:25:53 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:25:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:25:53 INFO] incremented to [AERI set: name H174, 6 scans, 60 angle, D22500 command] set
[sigmove 09:25:53 INFO] A174.SIG(18)
[sigmove 09:25:53 DEBUG] transformed A174Ma.SPC -> A174MA.SPC
[sigmove 09:25:53 DEBUG] transformed A174Mb.SPC -> A174MB.SPC
[sigmove 09:25:53 DEBUG] transformed A174Mc.SPC -> A174MC.SPC
[sigmove 09:25:53 DEBUG] transformed A174Md.SPC -> A174MD.SPC
[sigmove 09:25:53 DEBUG] transformed A174Me.SPC -> A174ME.SPC
[sigmove 09:25:53 DEBUG] transformed A174Mf.SPC -> A174MF.SPC
[Status 09:25:53 INFO] data for A174 transferred to science data processing
[Tidy 09:25:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:25:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:25:53 INFO] resetting WatchDogTimer
[Status 09:25:53 INFO] Starting Set [AERI set: name H174, 6 scans, 60 angle, D22500 command]
[Ingest 09:25:53 INFO] Sending XML status message
[Status 09:25:53 INFO] Mirror angle: 60
[Mirror 09:25:53 INFO] rotating to position H
[Status 09:25:54 INFO] .SET file for ACQ96 ready
[Ingest 09:25:54 INFO] Starting acquisition
[Status 09:25:54 INFO] reading housekeeping
[Status 09:26:12 INFO] acquire complete
[Status 09:26:13 INFO] writing housekeeping
[Sequencer 09:26:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:26:13 INFO] incremented H scene to 174 completed views
[Sequencer 09:26:13 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:26:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:26:13 INFO] incremented to [AERI set: name S174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:26:13 INFO] H174.SIG(18)
[sigmove 09:26:13 DEBUG] transformed H174Ma.SPC -> H174MA.SPC
[sigmove 09:26:13 DEBUG] transformed H174Mb.SPC -> H174MB.SPC
[sigmove 09:26:13 DEBUG] transformed H174Mc.SPC -> H174MC.SPC
[sigmove 09:26:13 DEBUG] transformed H174Md.SPC -> H174MD.SPC
[sigmove 09:26:13 DEBUG] transformed H174Me.SPC -> H174ME.SPC
[sigmove 09:26:13 DEBUG] transformed H174Mf.SPC -> H174MF.SPC
[Status 09:26:13 INFO] data for H174 transferred to science data processing
[Tidy 09:26:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:26:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:26:13 INFO] resetting WatchDogTimer
[Status 09:26:13 INFO] Starting Set [AERI set: name S174, 6 scans, 0 angle, D16300 command]
[Ingest 09:26:13 INFO] Sending XML status message
[Status 09:26:13 INFO] Mirror angle: 0
[Mirror 09:26:13 INFO] rotating to position S
[Status 09:26:14 INFO] .SET file for ACQ96 ready
[Ingest 09:26:15 INFO] Starting acquisition
[Status 09:26:15 INFO] reading housekeeping
[Status 09:26:32 INFO] acquire complete
[Status 09:26:33 INFO] writing housekeeping
[Sequencer 09:26:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:26:33 INFO] incremented S scene to 174 completed views
[Sequencer 09:26:33 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:26:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:26:33 INFO] incremented to [AERI set: name T174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:26:33 INFO] S174.SIG(18)
[sigmove 09:26:33 DEBUG] transformed S174Ma.SPC -> S174MA.SPC
[sigmove 09:26:33 DEBUG] transformed S174Mb.SPC -> S174MB.SPC
[sigmove 09:26:33 DEBUG] transformed S174Mc.SPC -> S174MC.SPC
[sigmove 09:26:33 DEBUG] transformed S174Md.SPC -> S174MD.SPC
[sigmove 09:26:33 DEBUG] transformed S174Me.SPC -> S174ME.SPC
[sigmove 09:26:33 DEBUG] transformed S174Mf.SPC -> S174MF.SPC
[Status 09:26:33 INFO] data for S174 transferred to science data processing
[Tidy 09:26:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:26:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:26:33 INFO] resetting WatchDogTimer
[Status 09:26:33 INFO] Starting Set [AERI set: name T174, 6 scans, 0 angle, D16300 command]
[Ingest 09:26:33 INFO] Sending XML status message
[Status 09:26:33 INFO] Mirror angle: 0
[Mirror 09:26:34 INFO] rotating to position T
[Status 09:26:34 INFO] .SET file for ACQ96 ready
[Ingest 09:26:34 INFO] Starting acquisition
[Status 09:26:34 INFO] reading housekeeping
[Status 09:26:52 INFO] acquire complete
[Status 09:26:53 INFO] writing housekeeping
[Sequencer 09:26:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:26:53 INFO] incremented T scene to 174 completed views
[Sequencer 09:26:53 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:26:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:26:53 INFO] incremented to [AERI set: name U174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:26:53 INFO] T174.SIG(18)
[sigmove 09:26:53 DEBUG] transformed T174Ma.SPC -> T174MA.SPC
[sigmove 09:26:53 DEBUG] transformed T174Mb.SPC -> T174MB.SPC
[sigmove 09:26:53 DEBUG] transformed T174Mc.SPC -> T174MC.SPC
[sigmove 09:26:53 DEBUG] transformed T174Md.SPC -> T174MD.SPC
[sigmove 09:26:53 DEBUG] transformed T174Me.SPC -> T174ME.SPC
[sigmove 09:26:53 DEBUG] transformed T174Mf.SPC -> T174MF.SPC
[Status 09:26:53 INFO] data for T174 transferred to science data processing
[Tidy 09:26:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:26:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:26:53 INFO] resetting WatchDogTimer
[Status 09:26:53 INFO] Starting Set [AERI set: name U174, 6 scans, 0 angle, D16300 command]
[Ingest 09:26:53 INFO] Sending XML status message
[Status 09:26:53 INFO] Mirror angle: 0
[Mirror 09:26:54 INFO] rotating to position U
[Status 09:26:54 INFO] .SET file for ACQ96 ready
[Ingest 09:26:54 INFO] Starting acquisition
[Status 09:26:55 INFO] reading housekeeping
[Status 09:27:13 INFO] acquire complete
[Status 09:27:13 INFO] writing housekeeping
[Sequencer 09:27:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:27:13 INFO] incremented U scene to 174 completed views
[Sequencer 09:27:13 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:27:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:27:13 INFO] incremented to [AERI set: name V174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:27:13 INFO] U174.SIG(18)
[sigmove 09:27:13 DEBUG] transformed U174Ma.SPC -> U174MA.SPC
[sigmove 09:27:13 DEBUG] transformed U174Mb.SPC -> U174MB.SPC
[sigmove 09:27:13 DEBUG] transformed U174Mc.SPC -> U174MC.SPC
[sigmove 09:27:13 DEBUG] transformed U174Md.SPC -> U174MD.SPC
[sigmove 09:27:13 DEBUG] transformed U174Me.SPC -> U174ME.SPC
[sigmove 09:27:13 DEBUG] transformed U174Mf.SPC -> U174MF.SPC
[Status 09:27:13 INFO] data for U174 transferred to science data processing
[Tidy 09:27:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:27:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:27:13 INFO] resetting WatchDogTimer
[Status 09:27:14 INFO] Starting Set [AERI set: name V174, 6 scans, 0 angle, D16300 command]
[Ingest 09:27:14 INFO] Sending XML status message
[Status 09:27:14 INFO] Mirror angle: 0
[Mirror 09:27:14 INFO] rotating to position V
[Status 09:27:14 INFO] .SET file for ACQ96 ready
[Ingest 09:27:14 INFO] Starting acquisition
[Status 09:27:15 INFO] reading housekeeping
[Status 09:27:33 INFO] acquire complete
[Status 09:27:34 INFO] writing housekeeping
[Sequencer 09:27:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:27:34 INFO] incremented V scene to 174 completed views
[Sequencer 09:27:34 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:27:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:27:34 INFO] incremented to [AERI set: name W174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:27:34 INFO] V174.SIG(18)
[sigmove 09:27:34 DEBUG] transformed V174Ma.SPC -> V174MA.SPC
[sigmove 09:27:34 DEBUG] transformed V174Mb.SPC -> V174MB.SPC
[sigmove 09:27:34 DEBUG] transformed V174Mc.SPC -> V174MC.SPC
[sigmove 09:27:34 DEBUG] transformed V174Md.SPC -> V174MD.SPC
[sigmove 09:27:34 DEBUG] transformed V174Me.SPC -> V174ME.SPC
[sigmove 09:27:34 DEBUG] transformed V174Mf.SPC -> V174MF.SPC
[Status 09:27:34 INFO] data for V174 transferred to science data processing
[Tidy 09:27:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:27:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:27:34 INFO] resetting WatchDogTimer
[Status 09:27:34 INFO] Starting Set [AERI set: name W174, 6 scans, 0 angle, D16300 command]
[Ingest 09:27:34 INFO] Sending XML status message
[Status 09:27:34 INFO] Mirror angle: 0
[Mirror 09:27:34 INFO] rotating to position W
[Status 09:27:34 INFO] .SET file for ACQ96 ready
[Ingest 09:27:35 INFO] Starting acquisition
[Status 09:27:35 INFO] reading housekeeping
[Status 09:27:53 INFO] acquire complete
[Status 09:27:54 INFO] writing housekeeping
[Sequencer 09:27:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:27:54 INFO] incremented W scene to 174 completed views
[Sequencer 09:27:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:27:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:27:54 INFO] incremented to [AERI set: name X174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:27:54 INFO] W174.SIG(18)
[sigmove 09:27:54 DEBUG] transformed W174Ma.SPC -> W174MA.SPC
[sigmove 09:27:54 DEBUG] transformed W174Mb.SPC -> W174MB.SPC
[sigmove 09:27:54 DEBUG] transformed W174Mc.SPC -> W174MC.SPC
[sigmove 09:27:54 DEBUG] transformed W174Md.SPC -> W174MD.SPC
[sigmove 09:27:54 DEBUG] transformed W174Me.SPC -> W174ME.SPC
[sigmove 09:27:54 DEBUG] transformed W174Mf.SPC -> W174MF.SPC
[Status 09:27:54 INFO] data for W174 transferred to science data processing
[Tidy 09:27:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:27:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:27:54 INFO] resetting WatchDogTimer
[Status 09:27:54 INFO] Starting Set [AERI set: name X174, 6 scans, 0 angle, D16300 command]
[Ingest 09:27:54 INFO] Sending XML status message
[Status 09:27:54 INFO] Mirror angle: 0
[Mirror 09:27:54 INFO] rotating to position X
[Status 09:27:55 INFO] .SET file for ACQ96 ready
[Ingest 09:27:55 INFO] Starting acquisition
[Status 09:27:55 INFO] reading housekeeping
[Status 09:28:13 INFO] acquire complete
[Status 09:28:14 INFO] writing housekeeping
[Sequencer 09:28:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:28:14 INFO] incremented X scene to 174 completed views
[Sequencer 09:28:14 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:28:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:28:14 INFO] incremented to [AERI set: name Y174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:28:14 INFO] X174.SIG(18)
[sigmove 09:28:14 DEBUG] transformed X174Ma.SPC -> X174MA.SPC
[sigmove 09:28:14 DEBUG] transformed X174Mb.SPC -> X174MB.SPC
[sigmove 09:28:14 DEBUG] transformed X174Mc.SPC -> X174MC.SPC
[sigmove 09:28:14 DEBUG] transformed X174Md.SPC -> X174MD.SPC
[sigmove 09:28:14 DEBUG] transformed X174Me.SPC -> X174ME.SPC
[sigmove 09:28:14 DEBUG] transformed X174Mf.SPC -> X174MF.SPC
[Status 09:28:14 INFO] data for X174 transferred to science data processing
[Tidy 09:28:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:28:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:28:14 INFO] resetting WatchDogTimer
[Status 09:28:14 INFO] Starting Set [AERI set: name Y174, 6 scans, 0 angle, D16300 command]
[Ingest 09:28:14 INFO] Sending XML status message
[Status 09:28:14 INFO] Mirror angle: 0
[Mirror 09:28:14 INFO] rotating to position Y
[Status 09:28:15 INFO] .SET file for ACQ96 ready
[Ingest 09:28:15 INFO] Starting acquisition
[Status 09:28:15 INFO] reading housekeeping
[Status 09:28:33 INFO] acquire complete
[Status 09:28:34 INFO] writing housekeeping
[Sequencer 09:28:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:28:34 INFO] incremented Y scene to 174 completed views
[Sequencer 09:28:34 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:28:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:28:34 INFO] incremented to [AERI set: name Z174, 6 scans, 0 angle, D16300 command] set
[sigmove 09:28:34 INFO] Y174.SIG(18)
[sigmove 09:28:34 DEBUG] transformed Y174Ma.SPC -> Y174MA.SPC
[sigmove 09:28:34 DEBUG] transformed Y174Mb.SPC -> Y174MB.SPC
[sigmove 09:28:34 DEBUG] transformed Y174Mc.SPC -> Y174MC.SPC
[sigmove 09:28:34 DEBUG] transformed Y174Md.SPC -> Y174MD.SPC
[sigmove 09:28:34 DEBUG] transformed Y174Me.SPC -> Y174ME.SPC
[sigmove 09:28:34 DEBUG] transformed Y174Mf.SPC -> Y174MF.SPC
[Status 09:28:34 INFO] data for Y174 transferred to science data processing
[Tidy 09:28:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:28:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:28:34 INFO] resetting WatchDogTimer
[Status 09:28:34 INFO] Starting Set [AERI set: name Z174, 6 scans, 0 angle, D16300 command]
[Ingest 09:28:34 INFO] Sending XML status message
[Status 09:28:34 INFO] Mirror angle: 0
[Mirror 09:28:35 INFO] rotating to position Z
[Status 09:28:35 INFO] .SET file for ACQ96 ready
[Ingest 09:28:35 INFO] Starting acquisition
[Status 09:28:36 INFO] reading housekeeping
[Status 09:28:54 INFO] acquire complete
[Status 09:28:54 INFO] writing housekeeping
[Sequencer 09:28:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:28:54 INFO] incremented Z scene to 174 completed views
[Sequencer 09:28:54 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:28:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:28:54 INFO] incremented to [AERI set: name H175, 6 scans, 60 angle, D22500 command] set
[sigmove 09:28:54 INFO] Z174.SIG(18)
[sigmove 09:28:54 DEBUG] transformed Z174Ma.SPC -> Z174MA.SPC
[sigmove 09:28:54 DEBUG] transformed Z174Mb.SPC -> Z174MB.SPC
[sigmove 09:28:54 DEBUG] transformed Z174Mc.SPC -> Z174MC.SPC
[sigmove 09:28:54 DEBUG] transformed Z174Md.SPC -> Z174MD.SPC
[sigmove 09:28:54 DEBUG] transformed Z174Me.SPC -> Z174ME.SPC
[sigmove 09:28:54 DEBUG] transformed Z174Mf.SPC -> Z174MF.SPC
[Status 09:28:54 INFO] data for Z174 transferred to science data processing
[Tidy 09:28:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:28:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:28:54 INFO] resetting WatchDogTimer
[Status 09:28:55 INFO] Starting Set [AERI set: name H175, 6 scans, 60 angle, D22500 command]
[Ingest 09:28:55 INFO] Sending XML status message
[Status 09:28:55 INFO] Mirror angle: 60
[Mirror 09:28:55 INFO] rotating to position H
[Status 09:28:56 INFO] .SET file for ACQ96 ready
[Ingest 09:28:56 INFO] Starting acquisition
[Status 09:28:56 INFO] reading housekeeping
[Status 09:29:14 INFO] acquire complete
[Status 09:29:14 INFO] writing housekeeping
[Sequencer 09:29:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:29:14 INFO] incremented H scene to 175 completed views
[Sequencer 09:29:14 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:29:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:29:15 INFO] incremented to [AERI set: name A175, 6 scans, 120 angle, D28300 command] set
[sigmove 09:29:15 INFO] H175.SIG(18)
[sigmove 09:29:15 DEBUG] transformed H175Ma.SPC -> H175MA.SPC
[sigmove 09:29:15 DEBUG] transformed H175Mb.SPC -> H175MB.SPC
[sigmove 09:29:15 DEBUG] transformed H175Mc.SPC -> H175MC.SPC
[sigmove 09:29:15 DEBUG] transformed H175Md.SPC -> H175MD.SPC
[sigmove 09:29:15 DEBUG] transformed H175Me.SPC -> H175ME.SPC
[sigmove 09:29:15 DEBUG] transformed H175Mf.SPC -> H175MF.SPC
[Status 09:29:15 INFO] data for H175 transferred to science data processing
[Tidy 09:29:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:29:15 INFO] A173.FIN(19),H173.FIN(19),S173.FIN(19),T173.FIN(19),U173.FIN(19),V173.FIN(19),W173.FIN(19),X173.FIN(19),Y173.FIN(19),Z173.FIN(19),A174.FIN(19),H174.FIN(19),S174.FIN(19),T174.FIN(19),U174.FIN(19),V174.FIN(19),W174.FIN(19),X174.FIN(19),Y174.FIN(19),Z174.FIN(19)
[sigmove 09:29:15 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:29:15 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:29:18 DEBUG] done zipping
[WatchDog 09:29:18 INFO] resetting WatchDogTimer
[Status 09:29:18 INFO] Starting Set [AERI set: name A175, 6 scans, 120 angle, D28300 command]
[Ingest 09:29:18 INFO] Sending XML status message
[Status 09:29:18 INFO] Mirror angle: 120
[Mirror 09:29:18 INFO] rotating to position A
[Status 09:29:19 INFO] .SET file for ACQ96 ready
[Ingest 09:29:20 INFO] Starting acquisition
[Status 09:29:20 INFO] reading housekeeping
[Status 09:29:37 INFO] acquire complete
[Status 09:29:38 INFO] writing housekeeping
[Sequencer 09:29:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:29:38 INFO] incremented A scene to 175 completed views
[Sequencer 09:29:38 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:29:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:29:38 INFO] incremented to [AERI set: name S175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:29:38 INFO] A175.SIG(18)
[sigmove 09:29:38 DEBUG] transformed A175Ma.SPC -> A175MA.SPC
[sigmove 09:29:38 DEBUG] transformed A175Mb.SPC -> A175MB.SPC
[sigmove 09:29:38 DEBUG] transformed A175Mc.SPC -> A175MC.SPC
[sigmove 09:29:38 DEBUG] transformed A175Md.SPC -> A175MD.SPC
[sigmove 09:29:38 DEBUG] transformed A175Me.SPC -> A175ME.SPC
[sigmove 09:29:38 DEBUG] transformed A175Mf.SPC -> A175MF.SPC
[Status 09:29:38 INFO] data for A175 transferred to science data processing
[Tidy 09:29:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:29:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:29:38 INFO] resetting WatchDogTimer
[Status 09:29:38 INFO] Starting Set [AERI set: name S175, 6 scans, 0 angle, D16300 command]
[Ingest 09:29:38 INFO] Sending XML status message
[Status 09:29:38 INFO] Mirror angle: 0
[Mirror 09:29:39 INFO] rotating to position S
[Status 09:29:40 INFO] .SET file for ACQ96 ready
[Ingest 09:29:40 INFO] Starting acquisition
[Status 09:29:40 INFO] reading housekeeping
[Status 09:29:59 INFO] acquire complete
[Status 09:29:59 INFO] writing housekeeping
[Sequencer 09:29:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:29:59 INFO] incremented S scene to 175 completed views
[Sequencer 09:29:59 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:29:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:29:59 INFO] incremented to [AERI set: name T175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:29:59 INFO] S175.SIG(18)
[sigmove 09:29:59 DEBUG] transformed S175Ma.SPC -> S175MA.SPC
[sigmove 09:29:59 DEBUG] transformed S175Mb.SPC -> S175MB.SPC
[sigmove 09:29:59 DEBUG] transformed S175Mc.SPC -> S175MC.SPC
[sigmove 09:29:59 DEBUG] transformed S175Md.SPC -> S175MD.SPC
[sigmove 09:29:59 DEBUG] transformed S175Me.SPC -> S175ME.SPC
[sigmove 09:29:59 DEBUG] transformed S175Mf.SPC -> S175MF.SPC
[Status 09:29:59 INFO] data for S175 transferred to science data processing
[Tidy 09:29:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:29:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:29:59 INFO] resetting WatchDogTimer
[Status 09:30:00 INFO] Starting Set [AERI set: name T175, 6 scans, 0 angle, D16300 command]
[Ingest 09:30:00 INFO] Sending XML status message
[Status 09:30:00 INFO] Mirror angle: 0
[Mirror 09:30:00 INFO] rotating to position T
[Status 09:30:00 INFO] .SET file for ACQ96 ready
[Ingest 09:30:01 INFO] Starting acquisition
[Status 09:30:01 INFO] reading housekeeping
[Status 09:30:19 INFO] acquire complete
[Status 09:30:20 INFO] writing housekeeping
[Sequencer 09:30:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:30:20 INFO] incremented T scene to 175 completed views
[Sequencer 09:30:20 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:30:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:30:20 INFO] incremented to [AERI set: name U175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:30:20 INFO] T175.SIG(18)
[sigmove 09:30:20 DEBUG] transformed T175Ma.SPC -> T175MA.SPC
[sigmove 09:30:20 DEBUG] transformed T175Mb.SPC -> T175MB.SPC
[sigmove 09:30:20 DEBUG] transformed T175Mc.SPC -> T175MC.SPC
[sigmove 09:30:20 DEBUG] transformed T175Md.SPC -> T175MD.SPC
[sigmove 09:30:20 DEBUG] transformed T175Me.SPC -> T175ME.SPC
[sigmove 09:30:20 DEBUG] transformed T175Mf.SPC -> T175MF.SPC
[Status 09:30:20 INFO] data for T175 transferred to science data processing
[Tidy 09:30:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:30:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:30:20 INFO] resetting WatchDogTimer
[Status 09:30:20 INFO] Starting Set [AERI set: name U175, 6 scans, 0 angle, D16300 command]
[Ingest 09:30:20 INFO] Sending XML status message
[Status 09:30:20 INFO] Mirror angle: 0
[Mirror 09:30:20 INFO] rotating to position U
[Status 09:30:20 INFO] .SET file for ACQ96 ready
[Ingest 09:30:21 INFO] Starting acquisition
[Status 09:30:21 INFO] reading housekeeping
[Status 09:30:39 INFO] acquire complete
[Status 09:30:40 INFO] writing housekeeping
[Sequencer 09:30:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:30:40 INFO] incremented U scene to 175 completed views
[Sequencer 09:30:40 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:30:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:30:40 INFO] incremented to [AERI set: name V175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:30:40 INFO] U175.SIG(18)
[sigmove 09:30:40 DEBUG] transformed U175Ma.SPC -> U175MA.SPC
[sigmove 09:30:40 DEBUG] transformed U175Mb.SPC -> U175MB.SPC
[sigmove 09:30:40 DEBUG] transformed U175Mc.SPC -> U175MC.SPC
[sigmove 09:30:40 DEBUG] transformed U175Md.SPC -> U175MD.SPC
[sigmove 09:30:40 DEBUG] transformed U175Me.SPC -> U175ME.SPC
[sigmove 09:30:40 DEBUG] transformed U175Mf.SPC -> U175MF.SPC
[Status 09:30:40 INFO] data for U175 transferred to science data processing
[Tidy 09:30:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:30:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:30:40 INFO] resetting WatchDogTimer
[Status 09:30:40 INFO] Starting Set [AERI set: name V175, 6 scans, 0 angle, D16300 command]
[Ingest 09:30:40 INFO] Sending XML status message
[Status 09:30:40 INFO] Mirror angle: 0
[Mirror 09:30:40 INFO] rotating to position V
[Status 09:30:41 INFO] .SET file for ACQ96 ready
[Ingest 09:30:41 INFO] Starting acquisition
[Status 09:30:41 INFO] reading housekeeping
[Status 09:30:59 INFO] acquire complete
[Status 09:31:00 INFO] writing housekeeping
[Sequencer 09:31:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:31:00 INFO] incremented V scene to 175 completed views
[Sequencer 09:31:00 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:31:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:31:00 INFO] incremented to [AERI set: name W175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:31:00 INFO] V175.SIG(18)
[sigmove 09:31:00 DEBUG] transformed V175Ma.SPC -> V175MA.SPC
[sigmove 09:31:00 DEBUG] transformed V175Mb.SPC -> V175MB.SPC
[sigmove 09:31:00 DEBUG] transformed V175Mc.SPC -> V175MC.SPC
[sigmove 09:31:00 DEBUG] transformed V175Md.SPC -> V175MD.SPC
[sigmove 09:31:00 DEBUG] transformed V175Me.SPC -> V175ME.SPC
[sigmove 09:31:00 DEBUG] transformed V175Mf.SPC -> V175MF.SPC
[Status 09:31:00 INFO] data for V175 transferred to science data processing
[Tidy 09:31:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:31:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:31:00 INFO] resetting WatchDogTimer
[Status 09:31:00 INFO] Starting Set [AERI set: name W175, 6 scans, 0 angle, D16300 command]
[Ingest 09:31:00 INFO] Sending XML status message
[Status 09:31:00 INFO] Mirror angle: 0
[Mirror 09:31:00 INFO] rotating to position W
[Status 09:31:01 INFO] .SET file for ACQ96 ready
[Ingest 09:31:01 INFO] Starting acquisition
[Status 09:31:01 INFO] reading housekeeping
[Status 09:31:19 INFO] acquire complete
[Status 09:31:20 INFO] writing housekeeping
[Sequencer 09:31:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:31:20 INFO] incremented W scene to 175 completed views
[Sequencer 09:31:20 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:31:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:31:20 INFO] incremented to [AERI set: name X175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:31:20 INFO] W175.SIG(18)
[sigmove 09:31:20 DEBUG] transformed W175Ma.SPC -> W175MA.SPC
[sigmove 09:31:20 DEBUG] transformed W175Mb.SPC -> W175MB.SPC
[sigmove 09:31:20 DEBUG] transformed W175Mc.SPC -> W175MC.SPC
[sigmove 09:31:20 DEBUG] transformed W175Md.SPC -> W175MD.SPC
[sigmove 09:31:20 DEBUG] transformed W175Me.SPC -> W175ME.SPC
[sigmove 09:31:20 DEBUG] transformed W175Mf.SPC -> W175MF.SPC
[Status 09:31:20 INFO] data for W175 transferred to science data processing
[Tidy 09:31:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:31:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:31:20 INFO] resetting WatchDogTimer
[Status 09:31:20 INFO] Starting Set [AERI set: name X175, 6 scans, 0 angle, D16300 command]
[Ingest 09:31:20 INFO] Sending XML status message
[Status 09:31:20 INFO] Mirror angle: 0
[Mirror 09:31:21 INFO] rotating to position X
[Status 09:31:21 INFO] .SET file for ACQ96 ready
[Ingest 09:31:21 INFO] Starting acquisition
[Status 09:31:21 INFO] reading housekeeping
[Status 09:31:40 INFO] acquire complete
[Status 09:31:40 INFO] writing housekeeping
[Sequencer 09:31:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:31:40 INFO] incremented X scene to 175 completed views
[Sequencer 09:31:40 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:31:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:31:40 INFO] incremented to [AERI set: name Y175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:31:40 INFO] X175.SIG(18)
[sigmove 09:31:40 DEBUG] transformed X175Ma.SPC -> X175MA.SPC
[sigmove 09:31:40 DEBUG] transformed X175Mb.SPC -> X175MB.SPC
[sigmove 09:31:40 DEBUG] transformed X175Mc.SPC -> X175MC.SPC
[sigmove 09:31:40 DEBUG] transformed X175Md.SPC -> X175MD.SPC
[sigmove 09:31:40 DEBUG] transformed X175Me.SPC -> X175ME.SPC
[sigmove 09:31:40 DEBUG] transformed X175Mf.SPC -> X175MF.SPC
[Status 09:31:40 INFO] data for X175 transferred to science data processing
[Tidy 09:31:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:31:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:31:40 INFO] resetting WatchDogTimer
[Status 09:31:41 INFO] Starting Set [AERI set: name Y175, 6 scans, 0 angle, D16300 command]
[Ingest 09:31:41 INFO] Sending XML status message
[Status 09:31:41 INFO] Mirror angle: 0
[Mirror 09:31:41 INFO] rotating to position Y
[Status 09:31:41 INFO] .SET file for ACQ96 ready
[Ingest 09:31:41 INFO] Starting acquisition
[Status 09:31:42 INFO] reading housekeeping
[Status 09:32:00 INFO] acquire complete
[Status 09:32:01 INFO] writing housekeeping
[Sequencer 09:32:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:32:01 INFO] incremented Y scene to 175 completed views
[Sequencer 09:32:01 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:32:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:32:01 INFO] incremented to [AERI set: name Z175, 6 scans, 0 angle, D16300 command] set
[sigmove 09:32:01 INFO] Y175.SIG(18)
[sigmove 09:32:01 DEBUG] transformed Y175Ma.SPC -> Y175MA.SPC
[sigmove 09:32:01 DEBUG] transformed Y175Mb.SPC -> Y175MB.SPC
[sigmove 09:32:01 DEBUG] transformed Y175Mc.SPC -> Y175MC.SPC
[sigmove 09:32:01 DEBUG] transformed Y175Md.SPC -> Y175MD.SPC
[sigmove 09:32:01 DEBUG] transformed Y175Me.SPC -> Y175ME.SPC
[sigmove 09:32:01 DEBUG] transformed Y175Mf.SPC -> Y175MF.SPC
[Status 09:32:01 INFO] data for Y175 transferred to science data processing
[Tidy 09:32:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:32:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:32:01 INFO] resetting WatchDogTimer
[Status 09:32:01 INFO] Starting Set [AERI set: name Z175, 6 scans, 0 angle, D16300 command]
[Ingest 09:32:01 INFO] Sending XML status message
[Status 09:32:01 INFO] Mirror angle: 0
[Mirror 09:32:01 INFO] rotating to position Z
[Status 09:32:01 INFO] .SET file for ACQ96 ready
[Ingest 09:32:02 INFO] Starting acquisition
[Status 09:32:02 INFO] reading housekeeping
[Status 09:32:20 INFO] acquire complete
[Status 09:32:21 INFO] writing housekeeping
[Sequencer 09:32:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:32:21 INFO] incremented Z scene to 175 completed views
[Sequencer 09:32:21 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:32:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:32:21 INFO] incremented to [AERI set: name A176, 6 scans, 120 angle, D28300 command] set
[sigmove 09:32:21 INFO] Z175.SIG(18)
[sigmove 09:32:21 DEBUG] transformed Z175Ma.SPC -> Z175MA.SPC
[sigmove 09:32:21 DEBUG] transformed Z175Mb.SPC -> Z175MB.SPC
[sigmove 09:32:21 DEBUG] transformed Z175Mc.SPC -> Z175MC.SPC
[sigmove 09:32:21 DEBUG] transformed Z175Md.SPC -> Z175MD.SPC
[sigmove 09:32:21 DEBUG] transformed Z175Me.SPC -> Z175ME.SPC
[sigmove 09:32:21 DEBUG] transformed Z175Mf.SPC -> Z175MF.SPC
[Status 09:32:21 INFO] data for Z175 transferred to science data processing
[Tidy 09:32:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:32:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:32:21 INFO] resetting WatchDogTimer
[Status 09:32:21 INFO] Starting Set [AERI set: name A176, 6 scans, 120 angle, D28300 command]
[Ingest 09:32:21 INFO] Sending XML status message
[Status 09:32:21 INFO] Mirror angle: 120
[Mirror 09:32:21 INFO] rotating to position A
[Status 09:32:23 INFO] .SET file for ACQ96 ready
[Ingest 09:32:23 INFO] Starting acquisition
[Status 09:32:23 INFO] reading housekeeping
[Status 09:32:41 INFO] acquire complete
[Status 09:32:42 INFO] writing housekeeping
[Sequencer 09:32:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:32:42 INFO] incremented A scene to 176 completed views
[Sequencer 09:32:42 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:32:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:32:42 INFO] incremented to [AERI set: name H176, 6 scans, 60 angle, D22500 command] set
[sigmove 09:32:42 INFO] A176.SIG(18)
[sigmove 09:32:42 DEBUG] transformed A176Ma.SPC -> A176MA.SPC
[sigmove 09:32:42 DEBUG] transformed A176Mb.SPC -> A176MB.SPC
[sigmove 09:32:42 DEBUG] transformed A176Mc.SPC -> A176MC.SPC
[sigmove 09:32:42 DEBUG] transformed A176Md.SPC -> A176MD.SPC
[sigmove 09:32:42 DEBUG] transformed A176Me.SPC -> A176ME.SPC
[sigmove 09:32:42 DEBUG] transformed A176Mf.SPC -> A176MF.SPC
[Status 09:32:42 INFO] data for A176 transferred to science data processing
[Tidy 09:32:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:32:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:32:42 INFO] resetting WatchDogTimer
[Status 09:32:42 INFO] Starting Set [AERI set: name H176, 6 scans, 60 angle, D22500 command]
[Ingest 09:32:42 INFO] Sending XML status message
[Status 09:32:42 INFO] Mirror angle: 60
[Mirror 09:32:43 INFO] rotating to position H
[Status 09:32:43 INFO] .SET file for ACQ96 ready
[Ingest 09:32:44 INFO] Starting acquisition
[Status 09:32:44 INFO] reading housekeeping
[Status 09:33:02 INFO] acquire complete
[Status 09:33:02 INFO] writing housekeeping
[Sequencer 09:33:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:33:02 INFO] incremented H scene to 176 completed views
[Sequencer 09:33:02 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:33:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:33:02 INFO] incremented to [AERI set: name S176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:33:02 INFO] H176.SIG(18)
[sigmove 09:33:02 DEBUG] transformed H176Ma.SPC -> H176MA.SPC
[sigmove 09:33:02 DEBUG] transformed H176Mb.SPC -> H176MB.SPC
[sigmove 09:33:02 DEBUG] transformed H176Mc.SPC -> H176MC.SPC
[sigmove 09:33:02 DEBUG] transformed H176Md.SPC -> H176MD.SPC
[sigmove 09:33:02 DEBUG] transformed H176Me.SPC -> H176ME.SPC
[sigmove 09:33:02 DEBUG] transformed H176Mf.SPC -> H176MF.SPC
[Status 09:33:02 INFO] data for H176 transferred to science data processing
[Tidy 09:33:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:33:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:33:02 INFO] resetting WatchDogTimer
[Status 09:33:02 INFO] Starting Set [AERI set: name S176, 6 scans, 0 angle, D16300 command]
[Ingest 09:33:02 INFO] Sending XML status message
[Status 09:33:02 INFO] Mirror angle: 0
[Mirror 09:33:03 INFO] rotating to position S
[Status 09:33:04 INFO] .SET file for ACQ96 ready
[Ingest 09:33:04 INFO] Starting acquisition
[Status 09:33:04 INFO] reading housekeeping
[Status 09:33:22 INFO] acquire complete
[Status 09:33:22 INFO] writing housekeeping
[Sequencer 09:33:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:33:22 INFO] incremented S scene to 176 completed views
[Sequencer 09:33:22 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:33:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:33:22 INFO] incremented to [AERI set: name T176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:33:22 INFO] S176.SIG(18)
[sigmove 09:33:22 DEBUG] transformed S176Ma.SPC -> S176MA.SPC
[sigmove 09:33:22 DEBUG] transformed S176Mb.SPC -> S176MB.SPC
[sigmove 09:33:22 DEBUG] transformed S176Mc.SPC -> S176MC.SPC
[sigmove 09:33:22 DEBUG] transformed S176Md.SPC -> S176MD.SPC
[sigmove 09:33:22 DEBUG] transformed S176Me.SPC -> S176ME.SPC
[sigmove 09:33:22 DEBUG] transformed S176Mf.SPC -> S176MF.SPC
[Status 09:33:22 INFO] data for S176 transferred to science data processing
[Tidy 09:33:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:33:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:33:22 INFO] resetting WatchDogTimer
[Status 09:33:23 INFO] Starting Set [AERI set: name T176, 6 scans, 0 angle, D16300 command]
[Ingest 09:33:23 INFO] Sending XML status message
[Status 09:33:23 INFO] Mirror angle: 0
[Mirror 09:33:23 INFO] rotating to position T
[Status 09:33:23 INFO] .SET file for ACQ96 ready
[Ingest 09:33:24 INFO] Starting acquisition
[Status 09:33:24 INFO] reading housekeeping
[Status 09:33:42 INFO] acquire complete
[Status 09:33:43 INFO] writing housekeeping
[Sequencer 09:33:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:33:43 INFO] incremented T scene to 176 completed views
[Sequencer 09:33:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:33:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:33:43 INFO] incremented to [AERI set: name U176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:33:43 INFO] T176.SIG(18)
[sigmove 09:33:43 DEBUG] transformed T176Ma.SPC -> T176MA.SPC
[sigmove 09:33:43 DEBUG] transformed T176Mb.SPC -> T176MB.SPC
[sigmove 09:33:43 DEBUG] transformed T176Mc.SPC -> T176MC.SPC
[sigmove 09:33:43 DEBUG] transformed T176Md.SPC -> T176MD.SPC
[sigmove 09:33:43 DEBUG] transformed T176Me.SPC -> T176ME.SPC
[sigmove 09:33:43 DEBUG] transformed T176Mf.SPC -> T176MF.SPC
[Status 09:33:43 INFO] data for T176 transferred to science data processing
[Tidy 09:33:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:33:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:33:43 INFO] resetting WatchDogTimer
[Status 09:33:43 INFO] Starting Set [AERI set: name U176, 6 scans, 0 angle, D16300 command]
[Ingest 09:33:43 INFO] Sending XML status message
[Status 09:33:43 INFO] Mirror angle: 0
[Mirror 09:33:43 INFO] rotating to position U
[Status 09:33:43 INFO] .SET file for ACQ96 ready
[Ingest 09:33:44 INFO] Starting acquisition
[Status 09:33:44 INFO] reading housekeeping
[Status 09:34:02 INFO] acquire complete
[Status 09:34:03 INFO] writing housekeeping
[Sequencer 09:34:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:34:03 INFO] incremented U scene to 176 completed views
[Sequencer 09:34:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:34:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:34:03 INFO] incremented to [AERI set: name V176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:34:03 INFO] U176.SIG(18)
[sigmove 09:34:03 DEBUG] transformed U176Ma.SPC -> U176MA.SPC
[sigmove 09:34:03 DEBUG] transformed U176Mb.SPC -> U176MB.SPC
[sigmove 09:34:03 DEBUG] transformed U176Mc.SPC -> U176MC.SPC
[sigmove 09:34:03 DEBUG] transformed U176Md.SPC -> U176MD.SPC
[sigmove 09:34:03 DEBUG] transformed U176Me.SPC -> U176ME.SPC
[sigmove 09:34:03 DEBUG] transformed U176Mf.SPC -> U176MF.SPC
[Status 09:34:03 INFO] data for U176 transferred to science data processing
[Tidy 09:34:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:34:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:34:03 INFO] resetting WatchDogTimer
[Status 09:34:03 INFO] Starting Set [AERI set: name V176, 6 scans, 0 angle, D16300 command]
[Ingest 09:34:03 INFO] Sending XML status message
[Status 09:34:03 INFO] Mirror angle: 0
[Mirror 09:34:03 INFO] rotating to position V
[Status 09:34:04 INFO] .SET file for ACQ96 ready
[Ingest 09:34:04 INFO] Starting acquisition
[Status 09:34:04 INFO] reading housekeeping
[Status 09:34:22 INFO] acquire complete
[Status 09:34:23 INFO] writing housekeeping
[Sequencer 09:34:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:34:23 INFO] incremented V scene to 176 completed views
[Sequencer 09:34:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:34:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:34:23 INFO] incremented to [AERI set: name W176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:34:23 INFO] V176.SIG(18)
[sigmove 09:34:23 DEBUG] transformed V176Ma.SPC -> V176MA.SPC
[sigmove 09:34:23 DEBUG] transformed V176Mb.SPC -> V176MB.SPC
[sigmove 09:34:23 DEBUG] transformed V176Mc.SPC -> V176MC.SPC
[sigmove 09:34:23 DEBUG] transformed V176Md.SPC -> V176MD.SPC
[sigmove 09:34:23 DEBUG] transformed V176Me.SPC -> V176ME.SPC
[sigmove 09:34:23 DEBUG] transformed V176Mf.SPC -> V176MF.SPC
[Status 09:34:23 INFO] data for V176 transferred to science data processing
[Tidy 09:34:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:34:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:34:23 INFO] resetting WatchDogTimer
[Status 09:34:23 INFO] Starting Set [AERI set: name W176, 6 scans, 0 angle, D16300 command]
[Ingest 09:34:23 INFO] Sending XML status message
[Status 09:34:23 INFO] Mirror angle: 0
[Mirror 09:34:24 INFO] rotating to position W
[Status 09:34:24 INFO] .SET file for ACQ96 ready
[Ingest 09:34:24 INFO] Starting acquisition
[Status 09:34:24 INFO] reading housekeeping
[Status 09:34:42 INFO] acquire complete
[Status 09:34:43 INFO] writing housekeeping
[Sequencer 09:34:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:34:43 INFO] incremented W scene to 176 completed views
[Sequencer 09:34:43 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:34:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:34:43 INFO] incremented to [AERI set: name X176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:34:43 INFO] W176.SIG(18)
[sigmove 09:34:43 DEBUG] transformed W176Ma.SPC -> W176MA.SPC
[sigmove 09:34:43 DEBUG] transformed W176Mb.SPC -> W176MB.SPC
[sigmove 09:34:43 DEBUG] transformed W176Mc.SPC -> W176MC.SPC
[sigmove 09:34:43 DEBUG] transformed W176Md.SPC -> W176MD.SPC
[sigmove 09:34:43 DEBUG] transformed W176Me.SPC -> W176ME.SPC
[sigmove 09:34:43 DEBUG] transformed W176Mf.SPC -> W176MF.SPC
[Status 09:34:43 INFO] data for W176 transferred to science data processing
[Tidy 09:34:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:34:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:34:43 INFO] resetting WatchDogTimer
[Status 09:34:43 INFO] Starting Set [AERI set: name X176, 6 scans, 0 angle, D16300 command]
[Ingest 09:34:43 INFO] Sending XML status message
[Status 09:34:43 INFO] Mirror angle: 0
[Mirror 09:34:44 INFO] rotating to position X
[Status 09:34:44 INFO] .SET file for ACQ96 ready
[Ingest 09:34:44 INFO] Starting acquisition
[Status 09:34:45 INFO] reading housekeeping
[Status 09:35:03 INFO] acquire complete
[Status 09:35:03 INFO] writing housekeeping
[Sequencer 09:35:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:35:03 INFO] incremented X scene to 176 completed views
[Sequencer 09:35:03 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:35:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:35:03 INFO] incremented to [AERI set: name Y176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:35:03 INFO] X176.SIG(18)
[sigmove 09:35:03 DEBUG] transformed X176Ma.SPC -> X176MA.SPC
[sigmove 09:35:03 DEBUG] transformed X176Mb.SPC -> X176MB.SPC
[sigmove 09:35:03 DEBUG] transformed X176Mc.SPC -> X176MC.SPC
[sigmove 09:35:03 DEBUG] transformed X176Md.SPC -> X176MD.SPC
[sigmove 09:35:03 DEBUG] transformed X176Me.SPC -> X176ME.SPC
[sigmove 09:35:03 DEBUG] transformed X176Mf.SPC -> X176MF.SPC
[Status 09:35:03 INFO] data for X176 transferred to science data processing
[Tidy 09:35:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:35:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:35:03 INFO] resetting WatchDogTimer
[Status 09:35:04 INFO] Starting Set [AERI set: name Y176, 6 scans, 0 angle, D16300 command]
[Ingest 09:35:04 INFO] Sending XML status message
[Status 09:35:04 INFO] Mirror angle: 0
[Mirror 09:35:04 INFO] rotating to position Y
[Status 09:35:04 INFO] .SET file for ACQ96 ready
[Ingest 09:35:04 INFO] Starting acquisition
[Status 09:35:05 INFO] reading housekeeping
[Status 09:35:23 INFO] acquire complete
[Status 09:35:24 INFO] writing housekeeping
[Sequencer 09:35:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:35:24 INFO] incremented Y scene to 176 completed views
[Sequencer 09:35:24 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:35:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:35:24 INFO] incremented to [AERI set: name Z176, 6 scans, 0 angle, D16300 command] set
[sigmove 09:35:24 INFO] Y176.SIG(18)
[sigmove 09:35:24 DEBUG] transformed Y176Ma.SPC -> Y176MA.SPC
[sigmove 09:35:24 DEBUG] transformed Y176Mb.SPC -> Y176MB.SPC
[sigmove 09:35:24 DEBUG] transformed Y176Mc.SPC -> Y176MC.SPC
[sigmove 09:35:24 DEBUG] transformed Y176Md.SPC -> Y176MD.SPC
[sigmove 09:35:24 DEBUG] transformed Y176Me.SPC -> Y176ME.SPC
[sigmove 09:35:24 DEBUG] transformed Y176Mf.SPC -> Y176MF.SPC
[Status 09:35:24 INFO] data for Y176 transferred to science data processing
[Tidy 09:35:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:35:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:35:24 INFO] resetting WatchDogTimer
[Status 09:35:24 INFO] Starting Set [AERI set: name Z176, 6 scans, 0 angle, D16300 command]
[Ingest 09:35:24 INFO] Sending XML status message
[Status 09:35:24 INFO] Mirror angle: 0
[Mirror 09:35:24 INFO] rotating to position Z
[Status 09:35:24 INFO] .SET file for ACQ96 ready
[Ingest 09:35:25 INFO] Starting acquisition
[Status 09:35:25 INFO] reading housekeeping
[Status 09:35:43 INFO] acquire complete
[Status 09:35:44 INFO] writing housekeeping
[Sequencer 09:35:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:35:44 INFO] incremented Z scene to 176 completed views
[Sequencer 09:35:44 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:35:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:35:44 INFO] incremented to [AERI set: name H177, 6 scans, 60 angle, D22500 command] set
[sigmove 09:35:44 INFO] Z176.SIG(18)
[sigmove 09:35:44 DEBUG] transformed Z176Ma.SPC -> Z176MA.SPC
[sigmove 09:35:44 DEBUG] transformed Z176Mb.SPC -> Z176MB.SPC
[sigmove 09:35:44 DEBUG] transformed Z176Mc.SPC -> Z176MC.SPC
[sigmove 09:35:44 DEBUG] transformed Z176Md.SPC -> Z176MD.SPC
[sigmove 09:35:44 DEBUG] transformed Z176Me.SPC -> Z176ME.SPC
[sigmove 09:35:44 DEBUG] transformed Z176Mf.SPC -> Z176MF.SPC
[Status 09:35:44 INFO] data for Z176 transferred to science data processing
[Tidy 09:35:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:35:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:35:44 INFO] resetting WatchDogTimer
[Status 09:35:44 INFO] Starting Set [AERI set: name H177, 6 scans, 60 angle, D22500 command]
[Ingest 09:35:44 INFO] Sending XML status message
[Status 09:35:44 INFO] Mirror angle: 60
[Mirror 09:35:44 INFO] rotating to position H
[Status 09:35:45 INFO] .SET file for ACQ96 ready
[Ingest 09:35:45 INFO] Starting acquisition
[Status 09:35:46 INFO] reading housekeeping
[Status 09:36:03 INFO] acquire complete
[Status 09:36:04 INFO] writing housekeeping
[Sequencer 09:36:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:36:04 INFO] incremented H scene to 177 completed views
[Sequencer 09:36:04 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:36:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:36:04 INFO] incremented to [AERI set: name A177, 6 scans, 120 angle, D28300 command] set
[sigmove 09:36:04 INFO] H177.SIG(18)
[sigmove 09:36:04 DEBUG] transformed H177Ma.SPC -> H177MA.SPC
[sigmove 09:36:04 DEBUG] transformed H177Mb.SPC -> H177MB.SPC
[sigmove 09:36:04 DEBUG] transformed H177Mc.SPC -> H177MC.SPC
[sigmove 09:36:04 DEBUG] transformed H177Md.SPC -> H177MD.SPC
[sigmove 09:36:04 DEBUG] transformed H177Me.SPC -> H177ME.SPC
[sigmove 09:36:04 DEBUG] transformed H177Mf.SPC -> H177MF.SPC
[Status 09:36:04 INFO] data for H177 transferred to science data processing
[Tidy 09:36:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:36:04 INFO] A175.FIN(19),H175.FIN(19),S175.FIN(19),T175.FIN(19),U175.FIN(19),V175.FIN(19),W175.FIN(19),X175.FIN(19),Y175.FIN(19),Z175.FIN(19),A176.FIN(19),H176.FIN(19),S176.FIN(19),T176.FIN(19),U176.FIN(19),V176.FIN(19),W176.FIN(19),X176.FIN(19),Y176.FIN(19),Z176.FIN(19)
[sigmove 09:36:04 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:36:04 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:36:07 DEBUG] done zipping
[WatchDog 09:36:07 INFO] resetting WatchDogTimer
[Status 09:36:08 INFO] Starting Set [AERI set: name A177, 6 scans, 120 angle, D28300 command]
[Ingest 09:36:08 INFO] Sending XML status message
[Status 09:36:08 INFO] Mirror angle: 120
[Mirror 09:36:08 INFO] rotating to position A
[Status 09:36:09 INFO] .SET file for ACQ96 ready
[Ingest 09:36:09 INFO] Starting acquisition
[Status 09:36:09 INFO] reading housekeeping
[Status 09:36:27 INFO] acquire complete
[Status 09:36:27 INFO] writing housekeeping
[Sequencer 09:36:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:36:27 INFO] incremented A scene to 177 completed views
[Sequencer 09:36:27 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:36:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:36:27 INFO] incremented to [AERI set: name S177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:36:27 INFO] A177.SIG(18)
[sigmove 09:36:28 DEBUG] transformed A177Ma.SPC -> A177MA.SPC
[sigmove 09:36:28 DEBUG] transformed A177Mb.SPC -> A177MB.SPC
[sigmove 09:36:28 DEBUG] transformed A177Mc.SPC -> A177MC.SPC
[sigmove 09:36:28 DEBUG] transformed A177Md.SPC -> A177MD.SPC
[sigmove 09:36:28 DEBUG] transformed A177Me.SPC -> A177ME.SPC
[sigmove 09:36:28 DEBUG] transformed A177Mf.SPC -> A177MF.SPC
[Status 09:36:28 INFO] data for A177 transferred to science data processing
[Tidy 09:36:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:36:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:36:28 INFO] resetting WatchDogTimer
[Status 09:36:28 INFO] Starting Set [AERI set: name S177, 6 scans, 0 angle, D16300 command]
[Ingest 09:36:28 INFO] Sending XML status message
[Status 09:36:28 INFO] Mirror angle: 0
[Mirror 09:36:28 INFO] rotating to position S
[Status 09:36:29 INFO] .SET file for ACQ96 ready
[Ingest 09:36:30 INFO] Starting acquisition
[Status 09:36:30 INFO] reading housekeeping
[Status 09:36:48 INFO] acquire complete
[Status 09:36:49 INFO] writing housekeeping
[Sequencer 09:36:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:36:49 INFO] incremented S scene to 177 completed views
[Sequencer 09:36:49 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:36:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:36:49 INFO] incremented to [AERI set: name T177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:36:49 INFO] S177.SIG(18)
[sigmove 09:36:49 DEBUG] transformed S177Ma.SPC -> S177MA.SPC
[sigmove 09:36:49 DEBUG] transformed S177Mb.SPC -> S177MB.SPC
[sigmove 09:36:49 DEBUG] transformed S177Mc.SPC -> S177MC.SPC
[sigmove 09:36:49 DEBUG] transformed S177Md.SPC -> S177MD.SPC
[sigmove 09:36:49 DEBUG] transformed S177Me.SPC -> S177ME.SPC
[sigmove 09:36:49 DEBUG] transformed S177Mf.SPC -> S177MF.SPC
[Status 09:36:49 INFO] data for S177 transferred to science data processing
[Tidy 09:36:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:36:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:36:49 INFO] resetting WatchDogTimer
[Status 09:36:49 INFO] Starting Set [AERI set: name T177, 6 scans, 0 angle, D16300 command]
[Ingest 09:36:49 INFO] Sending XML status message
[Status 09:36:49 INFO] Mirror angle: 0
[Mirror 09:36:49 INFO] rotating to position T
[Status 09:36:50 INFO] .SET file for ACQ96 ready
[Ingest 09:36:50 INFO] Starting acquisition
[Status 09:36:50 INFO] reading housekeeping
[Status 09:37:08 INFO] acquire complete
[Status 09:37:09 INFO] writing housekeeping
[Sequencer 09:37:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:37:09 INFO] incremented T scene to 177 completed views
[Sequencer 09:37:09 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:37:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:37:09 INFO] incremented to [AERI set: name U177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:37:09 INFO] T177.SIG(18)
[sigmove 09:37:09 DEBUG] transformed T177Ma.SPC -> T177MA.SPC
[sigmove 09:37:09 DEBUG] transformed T177Mb.SPC -> T177MB.SPC
[sigmove 09:37:09 DEBUG] transformed T177Mc.SPC -> T177MC.SPC
[sigmove 09:37:09 DEBUG] transformed T177Md.SPC -> T177MD.SPC
[sigmove 09:37:09 DEBUG] transformed T177Me.SPC -> T177ME.SPC
[sigmove 09:37:09 DEBUG] transformed T177Mf.SPC -> T177MF.SPC
[Status 09:37:09 INFO] data for T177 transferred to science data processing
[Tidy 09:37:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:37:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:37:09 INFO] resetting WatchDogTimer
[Status 09:37:09 INFO] Starting Set [AERI set: name U177, 6 scans, 0 angle, D16300 command]
[Ingest 09:37:09 INFO] Sending XML status message
[Status 09:37:09 INFO] Mirror angle: 0
[Mirror 09:37:10 INFO] rotating to position U
[Status 09:37:10 INFO] .SET file for ACQ96 ready
[Ingest 09:37:10 INFO] Starting acquisition
[Status 09:37:10 INFO] reading housekeeping
[Status 09:37:28 INFO] acquire complete
[Status 09:37:29 INFO] writing housekeeping
[Sequencer 09:37:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:37:29 INFO] incremented U scene to 177 completed views
[Sequencer 09:37:29 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:37:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:37:29 INFO] incremented to [AERI set: name V177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:37:29 INFO] U177.SIG(18)
[sigmove 09:37:29 DEBUG] transformed U177Ma.SPC -> U177MA.SPC
[sigmove 09:37:29 DEBUG] transformed U177Mb.SPC -> U177MB.SPC
[sigmove 09:37:29 DEBUG] transformed U177Mc.SPC -> U177MC.SPC
[sigmove 09:37:29 DEBUG] transformed U177Md.SPC -> U177MD.SPC
[sigmove 09:37:29 DEBUG] transformed U177Me.SPC -> U177ME.SPC
[sigmove 09:37:29 DEBUG] transformed U177Mf.SPC -> U177MF.SPC
[Status 09:37:29 INFO] data for U177 transferred to science data processing
[Tidy 09:37:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:37:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:37:29 INFO] resetting WatchDogTimer
[Status 09:37:29 INFO] Starting Set [AERI set: name V177, 6 scans, 0 angle, D16300 command]
[Ingest 09:37:29 INFO] Sending XML status message
[Status 09:37:29 INFO] Mirror angle: 0
[Mirror 09:37:30 INFO] rotating to position V
[Status 09:37:30 INFO] .SET file for ACQ96 ready
[Ingest 09:37:30 INFO] Starting acquisition
[Status 09:37:31 INFO] reading housekeeping
[Status 09:37:49 INFO] acquire complete
[Status 09:37:49 INFO] writing housekeeping
[Sequencer 09:37:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:37:49 INFO] incremented V scene to 177 completed views
[Sequencer 09:37:49 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:37:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:37:49 INFO] incremented to [AERI set: name W177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:37:49 INFO] V177.SIG(18)
[sigmove 09:37:49 DEBUG] transformed V177Ma.SPC -> V177MA.SPC
[sigmove 09:37:49 DEBUG] transformed V177Mb.SPC -> V177MB.SPC
[sigmove 09:37:49 DEBUG] transformed V177Mc.SPC -> V177MC.SPC
[sigmove 09:37:49 DEBUG] transformed V177Md.SPC -> V177MD.SPC
[sigmove 09:37:49 DEBUG] transformed V177Me.SPC -> V177ME.SPC
[sigmove 09:37:49 DEBUG] transformed V177Mf.SPC -> V177MF.SPC
[Status 09:37:49 INFO] data for V177 transferred to science data processing
[Tidy 09:37:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:37:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:37:49 INFO] resetting WatchDogTimer
[Status 09:37:50 INFO] Starting Set [AERI set: name W177, 6 scans, 0 angle, D16300 command]
[Ingest 09:37:50 INFO] Sending XML status message
[Status 09:37:50 INFO] Mirror angle: 0
[Mirror 09:37:50 INFO] rotating to position W
[Status 09:37:50 INFO] .SET file for ACQ96 ready
[Ingest 09:37:50 INFO] Starting acquisition
[Status 09:37:51 INFO] reading housekeeping
[Status 09:38:09 INFO] acquire complete
[Status 09:38:10 INFO] writing housekeeping
[Sequencer 09:38:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:38:10 INFO] incremented W scene to 177 completed views
[Sequencer 09:38:10 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:38:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:38:10 INFO] incremented to [AERI set: name X177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:38:10 INFO] W177.SIG(18)
[sigmove 09:38:10 DEBUG] transformed W177Ma.SPC -> W177MA.SPC
[sigmove 09:38:10 DEBUG] transformed W177Mb.SPC -> W177MB.SPC
[sigmove 09:38:10 DEBUG] transformed W177Mc.SPC -> W177MC.SPC
[sigmove 09:38:10 DEBUG] transformed W177Md.SPC -> W177MD.SPC
[sigmove 09:38:10 DEBUG] transformed W177Me.SPC -> W177ME.SPC
[sigmove 09:38:10 DEBUG] transformed W177Mf.SPC -> W177MF.SPC
[Status 09:38:10 INFO] data for W177 transferred to science data processing
[Tidy 09:38:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:38:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:38:10 INFO] resetting WatchDogTimer
[Status 09:38:10 INFO] Starting Set [AERI set: name X177, 6 scans, 0 angle, D16300 command]
[Ingest 09:38:10 INFO] Sending XML status message
[Status 09:38:10 INFO] Mirror angle: 0
[Mirror 09:38:10 INFO] rotating to position X
[Status 09:38:10 INFO] .SET file for ACQ96 ready
[Ingest 09:38:11 INFO] Starting acquisition
[Status 09:38:11 INFO] reading housekeeping
[Status 09:38:29 INFO] acquire complete
[Status 09:38:30 INFO] writing housekeeping
[Sequencer 09:38:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:38:30 INFO] incremented X scene to 177 completed views
[Sequencer 09:38:30 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:38:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:38:30 INFO] incremented to [AERI set: name Y177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:38:30 INFO] X177.SIG(18)
[sigmove 09:38:30 DEBUG] transformed X177Ma.SPC -> X177MA.SPC
[sigmove 09:38:30 DEBUG] transformed X177Mb.SPC -> X177MB.SPC
[sigmove 09:38:30 DEBUG] transformed X177Mc.SPC -> X177MC.SPC
[sigmove 09:38:30 DEBUG] transformed X177Md.SPC -> X177MD.SPC
[sigmove 09:38:30 DEBUG] transformed X177Me.SPC -> X177ME.SPC
[sigmove 09:38:30 DEBUG] transformed X177Mf.SPC -> X177MF.SPC
[Status 09:38:30 INFO] data for X177 transferred to science data processing
[Tidy 09:38:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:38:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:38:30 INFO] resetting WatchDogTimer
[Status 09:38:30 INFO] Starting Set [AERI set: name Y177, 6 scans, 0 angle, D16300 command]
[Ingest 09:38:30 INFO] Sending XML status message
[Status 09:38:30 INFO] Mirror angle: 0
[Mirror 09:38:30 INFO] rotating to position Y
[Status 09:38:31 INFO] .SET file for ACQ96 ready
[Ingest 09:38:31 INFO] Starting acquisition
[Status 09:38:31 INFO] reading housekeeping
[Status 09:38:49 INFO] acquire complete
[Status 09:38:50 INFO] writing housekeeping
[Sequencer 09:38:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:38:50 INFO] incremented Y scene to 177 completed views
[Sequencer 09:38:50 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:38:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:38:50 INFO] incremented to [AERI set: name Z177, 6 scans, 0 angle, D16300 command] set
[sigmove 09:38:50 INFO] Y177.SIG(18)
[sigmove 09:38:50 DEBUG] transformed Y177Ma.SPC -> Y177MA.SPC
[sigmove 09:38:50 DEBUG] transformed Y177Mb.SPC -> Y177MB.SPC
[sigmove 09:38:50 DEBUG] transformed Y177Mc.SPC -> Y177MC.SPC
[sigmove 09:38:50 DEBUG] transformed Y177Md.SPC -> Y177MD.SPC
[sigmove 09:38:50 DEBUG] transformed Y177Me.SPC -> Y177ME.SPC
[sigmove 09:38:50 DEBUG] transformed Y177Mf.SPC -> Y177MF.SPC
[Status 09:38:50 INFO] data for Y177 transferred to science data processing
[Tidy 09:38:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:38:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:38:50 INFO] resetting WatchDogTimer
[Status 09:38:50 INFO] Starting Set [AERI set: name Z177, 6 scans, 0 angle, D16300 command]
[Ingest 09:38:50 INFO] Sending XML status message
[Status 09:38:50 INFO] Mirror angle: 0
[Mirror 09:38:50 INFO] rotating to position Z
[Status 09:38:51 INFO] .SET file for ACQ96 ready
[Ingest 09:38:51 INFO] Starting acquisition
[Status 09:38:51 INFO] reading housekeeping
[Status 09:39:09 INFO] acquire complete
[Status 09:39:10 INFO] writing housekeeping
[Sequencer 09:39:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:39:10 INFO] incremented Z scene to 177 completed views
[Sequencer 09:39:10 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:39:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:39:10 INFO] incremented to [AERI set: name A178, 6 scans, 120 angle, D28300 command] set
[sigmove 09:39:10 INFO] Z177.SIG(18)
[sigmove 09:39:10 DEBUG] transformed Z177Ma.SPC -> Z177MA.SPC
[sigmove 09:39:10 DEBUG] transformed Z177Mb.SPC -> Z177MB.SPC
[sigmove 09:39:10 DEBUG] transformed Z177Mc.SPC -> Z177MC.SPC
[sigmove 09:39:10 DEBUG] transformed Z177Md.SPC -> Z177MD.SPC
[sigmove 09:39:10 DEBUG] transformed Z177Me.SPC -> Z177ME.SPC
[sigmove 09:39:10 DEBUG] transformed Z177Mf.SPC -> Z177MF.SPC
[Status 09:39:10 INFO] data for Z177 transferred to science data processing
[Tidy 09:39:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:39:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:39:10 INFO] resetting WatchDogTimer
[Status 09:39:10 INFO] Starting Set [AERI set: name A178, 6 scans, 120 angle, D28300 command]
[Ingest 09:39:10 INFO] Sending XML status message
[Status 09:39:10 INFO] Mirror angle: 120
[Mirror 09:39:11 INFO] rotating to position A
[Status 09:39:12 INFO] .SET file for ACQ96 ready
[Ingest 09:39:12 INFO] Starting acquisition
[Status 09:39:13 INFO] reading housekeeping
[Status 09:39:31 INFO] acquire complete
[Status 09:39:31 INFO] writing housekeeping
[Sequencer 09:39:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:39:31 INFO] incremented A scene to 178 completed views
[Sequencer 09:39:31 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:39:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:39:31 INFO] incremented to [AERI set: name H178, 6 scans, 60 angle, D22500 command] set
[sigmove 09:39:31 INFO] A178.SIG(18)
[sigmove 09:39:31 DEBUG] transformed A178Ma.SPC -> A178MA.SPC
[sigmove 09:39:31 DEBUG] transformed A178Mb.SPC -> A178MB.SPC
[sigmove 09:39:31 DEBUG] transformed A178Mc.SPC -> A178MC.SPC
[sigmove 09:39:31 DEBUG] transformed A178Md.SPC -> A178MD.SPC
[sigmove 09:39:31 DEBUG] transformed A178Me.SPC -> A178ME.SPC
[sigmove 09:39:31 DEBUG] transformed A178Mf.SPC -> A178MF.SPC
[Status 09:39:31 INFO] data for A178 transferred to science data processing
[Tidy 09:39:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:39:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:39:31 INFO] resetting WatchDogTimer
[Status 09:39:32 INFO] Starting Set [AERI set: name H178, 6 scans, 60 angle, D22500 command]
[Ingest 09:39:32 INFO] Sending XML status message
[Status 09:39:32 INFO] Mirror angle: 60
[Mirror 09:39:32 INFO] rotating to position H
[Status 09:39:33 INFO] .SET file for ACQ96 ready
[Ingest 09:39:33 INFO] Starting acquisition
[Status 09:39:33 INFO] reading housekeeping
[Status 09:39:51 INFO] acquire complete
[Status 09:39:52 INFO] writing housekeeping
[Sequencer 09:39:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:39:52 INFO] incremented H scene to 178 completed views
[Sequencer 09:39:52 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:39:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:39:52 INFO] incremented to [AERI set: name S178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:39:52 INFO] H178.SIG(18)
[sigmove 09:39:52 DEBUG] transformed H178Ma.SPC -> H178MA.SPC
[sigmove 09:39:52 DEBUG] transformed H178Mb.SPC -> H178MB.SPC
[sigmove 09:39:52 DEBUG] transformed H178Mc.SPC -> H178MC.SPC
[sigmove 09:39:52 DEBUG] transformed H178Md.SPC -> H178MD.SPC
[sigmove 09:39:52 DEBUG] transformed H178Me.SPC -> H178ME.SPC
[sigmove 09:39:52 DEBUG] transformed H178Mf.SPC -> H178MF.SPC
[Status 09:39:52 INFO] data for H178 transferred to science data processing
[Tidy 09:39:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:39:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:39:52 INFO] resetting WatchDogTimer
[Status 09:39:52 INFO] Starting Set [AERI set: name S178, 6 scans, 0 angle, D16300 command]
[Ingest 09:39:52 INFO] Sending XML status message
[Status 09:39:52 INFO] Mirror angle: 0
[Mirror 09:39:52 INFO] rotating to position S
[Status 09:39:53 INFO] .SET file for ACQ96 ready
[Ingest 09:39:53 INFO] Starting acquisition
[Status 09:39:54 INFO] reading housekeeping
[Status 09:40:11 INFO] acquire complete
[Status 09:40:12 INFO] writing housekeeping
[Sequencer 09:40:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:40:12 INFO] incremented S scene to 178 completed views
[Sequencer 09:40:12 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:40:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:40:12 INFO] incremented to [AERI set: name T178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:40:12 INFO] S178.SIG(18)
[sigmove 09:40:12 DEBUG] transformed S178Ma.SPC -> S178MA.SPC
[sigmove 09:40:12 DEBUG] transformed S178Mb.SPC -> S178MB.SPC
[sigmove 09:40:12 DEBUG] transformed S178Mc.SPC -> S178MC.SPC
[sigmove 09:40:12 DEBUG] transformed S178Md.SPC -> S178MD.SPC
[sigmove 09:40:12 DEBUG] transformed S178Me.SPC -> S178ME.SPC
[sigmove 09:40:12 DEBUG] transformed S178Mf.SPC -> S178MF.SPC
[Status 09:40:12 INFO] data for S178 transferred to science data processing
[Tidy 09:40:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:40:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:40:12 INFO] resetting WatchDogTimer
[Status 09:40:12 INFO] Starting Set [AERI set: name T178, 6 scans, 0 angle, D16300 command]
[Ingest 09:40:12 INFO] Sending XML status message
[Status 09:40:12 INFO] Mirror angle: 0
[Mirror 09:40:12 INFO] rotating to position T
[Status 09:40:13 INFO] .SET file for ACQ96 ready
[Ingest 09:40:13 INFO] Starting acquisition
[Status 09:40:13 INFO] reading housekeeping
[Status 09:40:31 INFO] acquire complete
[Status 09:40:32 INFO] writing housekeeping
[Sequencer 09:40:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:40:32 INFO] incremented T scene to 178 completed views
[Sequencer 09:40:32 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:40:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:40:32 INFO] incremented to [AERI set: name U178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:40:32 INFO] T178.SIG(18)
[sigmove 09:40:32 DEBUG] transformed T178Ma.SPC -> T178MA.SPC
[sigmove 09:40:32 DEBUG] transformed T178Mb.SPC -> T178MB.SPC
[sigmove 09:40:32 DEBUG] transformed T178Mc.SPC -> T178MC.SPC
[sigmove 09:40:32 DEBUG] transformed T178Md.SPC -> T178MD.SPC
[sigmove 09:40:32 DEBUG] transformed T178Me.SPC -> T178ME.SPC
[sigmove 09:40:32 DEBUG] transformed T178Mf.SPC -> T178MF.SPC
[Status 09:40:32 INFO] data for T178 transferred to science data processing
[Tidy 09:40:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:40:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:40:32 INFO] resetting WatchDogTimer
[Status 09:40:32 INFO] Starting Set [AERI set: name U178, 6 scans, 0 angle, D16300 command]
[Ingest 09:40:32 INFO] Sending XML status message
[Status 09:40:32 INFO] Mirror angle: 0
[Mirror 09:40:33 INFO] rotating to position U
[Status 09:40:33 INFO] .SET file for ACQ96 ready
[Ingest 09:40:33 INFO] Starting acquisition
[Status 09:40:33 INFO] reading housekeeping
[Status 09:40:52 INFO] acquire complete
[Status 09:40:52 INFO] writing housekeeping
[Sequencer 09:40:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:40:52 INFO] incremented U scene to 178 completed views
[Sequencer 09:40:52 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:40:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:40:52 INFO] incremented to [AERI set: name V178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:40:52 INFO] U178.SIG(18)
[sigmove 09:40:52 DEBUG] transformed U178Ma.SPC -> U178MA.SPC
[sigmove 09:40:52 DEBUG] transformed U178Mb.SPC -> U178MB.SPC
[sigmove 09:40:52 DEBUG] transformed U178Mc.SPC -> U178MC.SPC
[sigmove 09:40:52 DEBUG] transformed U178Md.SPC -> U178MD.SPC
[sigmove 09:40:52 DEBUG] transformed U178Me.SPC -> U178ME.SPC
[sigmove 09:40:52 DEBUG] transformed U178Mf.SPC -> U178MF.SPC
[Status 09:40:52 INFO] data for U178 transferred to science data processing
[Tidy 09:40:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:40:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:40:52 INFO] resetting WatchDogTimer
[Status 09:40:53 INFO] Starting Set [AERI set: name V178, 6 scans, 0 angle, D16300 command]
[Ingest 09:40:53 INFO] Sending XML status message
[Status 09:40:53 INFO] Mirror angle: 0
[Mirror 09:40:53 INFO] rotating to position V
[Status 09:40:53 INFO] .SET file for ACQ96 ready
[Ingest 09:40:53 INFO] Starting acquisition
[Status 09:40:54 INFO] reading housekeeping
[Status 09:41:12 INFO] acquire complete
[Status 09:41:12 INFO] writing housekeeping
[Sequencer 09:41:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:41:12 INFO] incremented V scene to 178 completed views
[Sequencer 09:41:12 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:41:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:41:12 INFO] incremented to [AERI set: name W178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:41:12 INFO] V178.SIG(18)
[sigmove 09:41:12 DEBUG] transformed V178Ma.SPC -> V178MA.SPC
[sigmove 09:41:12 DEBUG] transformed V178Mb.SPC -> V178MB.SPC
[sigmove 09:41:12 DEBUG] transformed V178Mc.SPC -> V178MC.SPC
[sigmove 09:41:12 DEBUG] transformed V178Md.SPC -> V178MD.SPC
[sigmove 09:41:12 DEBUG] transformed V178Me.SPC -> V178ME.SPC
[sigmove 09:41:12 DEBUG] transformed V178Mf.SPC -> V178MF.SPC
[Status 09:41:12 INFO] data for V178 transferred to science data processing
[Tidy 09:41:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:41:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:41:12 INFO] resetting WatchDogTimer
[Status 09:41:13 INFO] Starting Set [AERI set: name W178, 6 scans, 0 angle, D16300 command]
[Ingest 09:41:13 INFO] Sending XML status message
[Status 09:41:13 INFO] Mirror angle: 0
[Mirror 09:41:13 INFO] rotating to position W
[Status 09:41:13 INFO] .SET file for ACQ96 ready
[Ingest 09:41:14 INFO] Starting acquisition
[Status 09:41:14 INFO] reading housekeeping
[Status 09:41:32 INFO] acquire complete
[Status 09:41:33 INFO] writing housekeeping
[Sequencer 09:41:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:41:33 INFO] incremented W scene to 178 completed views
[Sequencer 09:41:33 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:41:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:41:33 INFO] incremented to [AERI set: name X178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:41:33 INFO] W178.SIG(18)
[sigmove 09:41:33 DEBUG] transformed W178Ma.SPC -> W178MA.SPC
[sigmove 09:41:33 DEBUG] transformed W178Mb.SPC -> W178MB.SPC
[sigmove 09:41:33 DEBUG] transformed W178Mc.SPC -> W178MC.SPC
[sigmove 09:41:33 DEBUG] transformed W178Md.SPC -> W178MD.SPC
[sigmove 09:41:33 DEBUG] transformed W178Me.SPC -> W178ME.SPC
[sigmove 09:41:33 DEBUG] transformed W178Mf.SPC -> W178MF.SPC
[Status 09:41:33 INFO] data for W178 transferred to science data processing
[Tidy 09:41:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:41:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:41:33 INFO] resetting WatchDogTimer
[Status 09:41:33 INFO] Starting Set [AERI set: name X178, 6 scans, 0 angle, D16300 command]
[Ingest 09:41:33 INFO] Sending XML status message
[Status 09:41:33 INFO] Mirror angle: 0
[Mirror 09:41:33 INFO] rotating to position X
[Status 09:41:34 INFO] .SET file for ACQ96 ready
[Ingest 09:41:34 INFO] Starting acquisition
[Status 09:41:34 INFO] reading housekeeping
[Status 09:41:52 INFO] acquire complete
[Status 09:41:53 INFO] writing housekeeping
[Sequencer 09:41:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:41:53 INFO] incremented X scene to 178 completed views
[Sequencer 09:41:53 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:41:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:41:53 INFO] incremented to [AERI set: name Y178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:41:53 INFO] X178.SIG(18)
[sigmove 09:41:53 DEBUG] transformed X178Ma.SPC -> X178MA.SPC
[sigmove 09:41:53 DEBUG] transformed X178Mb.SPC -> X178MB.SPC
[sigmove 09:41:53 DEBUG] transformed X178Mc.SPC -> X178MC.SPC
[sigmove 09:41:53 DEBUG] transformed X178Md.SPC -> X178MD.SPC
[sigmove 09:41:53 DEBUG] transformed X178Me.SPC -> X178ME.SPC
[sigmove 09:41:53 DEBUG] transformed X178Mf.SPC -> X178MF.SPC
[Status 09:41:53 INFO] data for X178 transferred to science data processing
[Tidy 09:41:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:41:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:41:53 INFO] resetting WatchDogTimer
[Status 09:41:53 INFO] Starting Set [AERI set: name Y178, 6 scans, 0 angle, D16300 command]
[Ingest 09:41:53 INFO] Sending XML status message
[Status 09:41:53 INFO] Mirror angle: 0
[Mirror 09:41:53 INFO] rotating to position Y
[Status 09:41:54 INFO] .SET file for ACQ96 ready
[Ingest 09:41:54 INFO] Starting acquisition
[Status 09:41:54 INFO] reading housekeeping
[Status 09:42:12 INFO] acquire complete
[Status 09:42:13 INFO] writing housekeeping
[Sequencer 09:42:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:42:13 INFO] incremented Y scene to 178 completed views
[Sequencer 09:42:13 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:42:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:42:13 INFO] incremented to [AERI set: name Z178, 6 scans, 0 angle, D16300 command] set
[sigmove 09:42:13 INFO] Y178.SIG(18)
[sigmove 09:42:13 DEBUG] transformed Y178Ma.SPC -> Y178MA.SPC
[sigmove 09:42:13 DEBUG] transformed Y178Mb.SPC -> Y178MB.SPC
[sigmove 09:42:13 DEBUG] transformed Y178Mc.SPC -> Y178MC.SPC
[sigmove 09:42:13 DEBUG] transformed Y178Md.SPC -> Y178MD.SPC
[sigmove 09:42:13 DEBUG] transformed Y178Me.SPC -> Y178ME.SPC
[sigmove 09:42:13 DEBUG] transformed Y178Mf.SPC -> Y178MF.SPC
[Status 09:42:13 INFO] data for Y178 transferred to science data processing
[Tidy 09:42:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:42:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:42:13 INFO] resetting WatchDogTimer
[Status 09:42:13 INFO] Starting Set [AERI set: name Z178, 6 scans, 0 angle, D16300 command]
[Ingest 09:42:13 INFO] Sending XML status message
[Status 09:42:13 INFO] Mirror angle: 0
[Mirror 09:42:14 INFO] rotating to position Z
[Status 09:42:14 INFO] .SET file for ACQ96 ready
[Ingest 09:42:14 INFO] Starting acquisition
[Status 09:42:14 INFO] reading housekeeping
[Status 09:42:32 INFO] acquire complete
[Status 09:42:33 INFO] writing housekeeping
[Sequencer 09:42:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:42:33 INFO] incremented Z scene to 178 completed views
[Sequencer 09:42:33 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:42:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:42:33 INFO] incremented to [AERI set: name H179, 6 scans, 60 angle, D22500 command] set
[sigmove 09:42:33 INFO] Z178.SIG(18)
[sigmove 09:42:33 DEBUG] transformed Z178Ma.SPC -> Z178MA.SPC
[sigmove 09:42:33 DEBUG] transformed Z178Mb.SPC -> Z178MB.SPC
[sigmove 09:42:33 DEBUG] transformed Z178Mc.SPC -> Z178MC.SPC
[sigmove 09:42:33 DEBUG] transformed Z178Md.SPC -> Z178MD.SPC
[sigmove 09:42:33 DEBUG] transformed Z178Me.SPC -> Z178ME.SPC
[sigmove 09:42:33 DEBUG] transformed Z178Mf.SPC -> Z178MF.SPC
[Status 09:42:33 INFO] data for Z178 transferred to science data processing
[Tidy 09:42:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:42:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:42:33 INFO] resetting WatchDogTimer
[Status 09:42:33 INFO] Starting Set [AERI set: name H179, 6 scans, 60 angle, D22500 command]
[Ingest 09:42:33 INFO] Sending XML status message
[Status 09:42:33 INFO] Mirror angle: 60
[Mirror 09:42:34 INFO] rotating to position H
[Status 09:42:35 INFO] .SET file for ACQ96 ready
[Ingest 09:42:35 INFO] Starting acquisition
[Status 09:42:35 INFO] reading housekeeping
[Status 09:42:53 INFO] acquire complete
[Status 09:42:53 INFO] writing housekeeping
[Sequencer 09:42:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:42:53 INFO] incremented H scene to 179 completed views
[Sequencer 09:42:53 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:42:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:42:53 INFO] incremented to [AERI set: name A179, 6 scans, 120 angle, D28300 command] set
[sigmove 09:42:53 INFO] H179.SIG(18)
[sigmove 09:42:53 DEBUG] transformed H179Ma.SPC -> H179MA.SPC
[sigmove 09:42:53 DEBUG] transformed H179Mb.SPC -> H179MB.SPC
[sigmove 09:42:53 DEBUG] transformed H179Mc.SPC -> H179MC.SPC
[sigmove 09:42:53 DEBUG] transformed H179Md.SPC -> H179MD.SPC
[sigmove 09:42:53 DEBUG] transformed H179Me.SPC -> H179ME.SPC
[sigmove 09:42:53 DEBUG] transformed H179Mf.SPC -> H179MF.SPC
[Status 09:42:53 INFO] data for H179 transferred to science data processing
[Tidy 09:42:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:42:54 INFO] A177.FIN(19),H177.FIN(19),S177.FIN(19),T177.FIN(19),U177.FIN(19),V177.FIN(19),W177.FIN(19),X177.FIN(19),Y177.FIN(19),Z177.FIN(19),A178.FIN(19),H178.FIN(19),S178.FIN(19),T178.FIN(19),U178.FIN(19),V178.FIN(19),W178.FIN(19),X178.FIN(19),Y178.FIN(19),Z178.FIN(19)
[sigmove 09:42:54 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:42:54 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:42:57 DEBUG] done zipping
[WatchDog 09:42:57 INFO] resetting WatchDogTimer
[Status 09:42:57 INFO] Starting Set [AERI set: name A179, 6 scans, 120 angle, D28300 command]
[Ingest 09:42:57 INFO] Sending XML status message
[Status 09:42:57 INFO] Mirror angle: 120
[Mirror 09:42:57 INFO] rotating to position A
[Status 09:42:58 INFO] .SET file for ACQ96 ready
[Ingest 09:42:59 INFO] Starting acquisition
[Status 09:42:59 INFO] reading housekeeping
[Status 09:43:16 INFO] acquire complete
[Status 09:43:17 INFO] writing housekeeping
[Sequencer 09:43:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:43:17 INFO] incremented A scene to 179 completed views
[Sequencer 09:43:17 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:43:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:43:17 INFO] incremented to [AERI set: name S179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:43:17 INFO] A179.SIG(18)
[sigmove 09:43:17 DEBUG] transformed A179Ma.SPC -> A179MA.SPC
[sigmove 09:43:17 DEBUG] transformed A179Mb.SPC -> A179MB.SPC
[sigmove 09:43:17 DEBUG] transformed A179Mc.SPC -> A179MC.SPC
[sigmove 09:43:17 DEBUG] transformed A179Md.SPC -> A179MD.SPC
[sigmove 09:43:17 DEBUG] transformed A179Me.SPC -> A179ME.SPC
[sigmove 09:43:17 DEBUG] transformed A179Mf.SPC -> A179MF.SPC
[Status 09:43:17 INFO] data for A179 transferred to science data processing
[Tidy 09:43:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:43:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:43:17 INFO] resetting WatchDogTimer
[Status 09:43:17 INFO] Starting Set [AERI set: name S179, 6 scans, 0 angle, D16300 command]
[Ingest 09:43:17 INFO] Sending XML status message
[Status 09:43:17 INFO] Mirror angle: 0
[Mirror 09:43:17 INFO] rotating to position S
[Status 09:43:19 INFO] .SET file for ACQ96 ready
[Ingest 09:43:19 INFO] Starting acquisition
[Status 09:43:19 INFO] reading housekeeping
[Status 09:43:38 INFO] acquire complete
[Status 09:43:38 INFO] writing housekeeping
[Sequencer 09:43:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:43:38 INFO] incremented S scene to 179 completed views
[Sequencer 09:43:38 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:43:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:43:38 INFO] incremented to [AERI set: name T179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:43:38 INFO] S179.SIG(18)
[sigmove 09:43:38 DEBUG] transformed S179Ma.SPC -> S179MA.SPC
[sigmove 09:43:38 DEBUG] transformed S179Mb.SPC -> S179MB.SPC
[sigmove 09:43:38 DEBUG] transformed S179Mc.SPC -> S179MC.SPC
[sigmove 09:43:38 DEBUG] transformed S179Md.SPC -> S179MD.SPC
[sigmove 09:43:38 DEBUG] transformed S179Me.SPC -> S179ME.SPC
[sigmove 09:43:38 DEBUG] transformed S179Mf.SPC -> S179MF.SPC
[Status 09:43:38 INFO] data for S179 transferred to science data processing
[Tidy 09:43:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:43:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:43:38 INFO] resetting WatchDogTimer
[Status 09:43:39 INFO] Starting Set [AERI set: name T179, 6 scans, 0 angle, D16300 command]
[Ingest 09:43:39 INFO] Sending XML status message
[Status 09:43:39 INFO] Mirror angle: 0
[Mirror 09:43:39 INFO] rotating to position T
[Status 09:43:39 INFO] .SET file for ACQ96 ready
[Ingest 09:43:39 INFO] Starting acquisition
[Status 09:43:40 INFO] reading housekeeping
[Status 09:43:58 INFO] acquire complete
[Status 09:43:58 INFO] writing housekeeping
[Sequencer 09:43:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:43:58 INFO] incremented T scene to 179 completed views
[Sequencer 09:43:58 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:43:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:43:58 INFO] incremented to [AERI set: name U179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:43:58 INFO] T179.SIG(18)
[sigmove 09:43:58 DEBUG] transformed T179Ma.SPC -> T179MA.SPC
[sigmove 09:43:58 DEBUG] transformed T179Mb.SPC -> T179MB.SPC
[sigmove 09:43:58 DEBUG] transformed T179Mc.SPC -> T179MC.SPC
[sigmove 09:43:58 DEBUG] transformed T179Md.SPC -> T179MD.SPC
[sigmove 09:43:58 DEBUG] transformed T179Me.SPC -> T179ME.SPC
[sigmove 09:43:58 DEBUG] transformed T179Mf.SPC -> T179MF.SPC
[Status 09:43:58 INFO] data for T179 transferred to science data processing
[Tidy 09:43:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:43:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:43:58 INFO] resetting WatchDogTimer
[Status 09:43:59 INFO] Starting Set [AERI set: name U179, 6 scans, 0 angle, D16300 command]
[Ingest 09:43:59 INFO] Sending XML status message
[Status 09:43:59 INFO] Mirror angle: 0
[Mirror 09:43:59 INFO] rotating to position U
[Status 09:43:59 INFO] .SET file for ACQ96 ready
[Ingest 09:44:00 INFO] Starting acquisition
[Status 09:44:00 INFO] reading housekeeping
[Status 09:44:18 INFO] acquire complete
[Status 09:44:19 INFO] writing housekeeping
[Sequencer 09:44:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:44:19 INFO] incremented U scene to 179 completed views
[Sequencer 09:44:19 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:44:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:44:19 INFO] incremented to [AERI set: name V179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:44:19 INFO] U179.SIG(18)
[sigmove 09:44:19 DEBUG] transformed U179Ma.SPC -> U179MA.SPC
[sigmove 09:44:19 DEBUG] transformed U179Mb.SPC -> U179MB.SPC
[sigmove 09:44:19 DEBUG] transformed U179Mc.SPC -> U179MC.SPC
[sigmove 09:44:19 DEBUG] transformed U179Md.SPC -> U179MD.SPC
[sigmove 09:44:19 DEBUG] transformed U179Me.SPC -> U179ME.SPC
[sigmove 09:44:19 DEBUG] transformed U179Mf.SPC -> U179MF.SPC
[Status 09:44:19 INFO] data for U179 transferred to science data processing
[Tidy 09:44:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:44:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:44:19 INFO] resetting WatchDogTimer
[Status 09:44:19 INFO] Starting Set [AERI set: name V179, 6 scans, 0 angle, D16300 command]
[Ingest 09:44:19 INFO] Sending XML status message
[Status 09:44:19 INFO] Mirror angle: 0
[Mirror 09:44:19 INFO] rotating to position V
[Status 09:44:20 INFO] .SET file for ACQ96 ready
[Ingest 09:44:20 INFO] Starting acquisition
[Status 09:44:20 INFO] reading housekeeping
[Status 09:44:38 INFO] acquire complete
[Status 09:44:39 INFO] writing housekeeping
[Sequencer 09:44:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:44:39 INFO] incremented V scene to 179 completed views
[Sequencer 09:44:39 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:44:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:44:39 INFO] incremented to [AERI set: name W179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:44:39 INFO] V179.SIG(18)
[sigmove 09:44:39 DEBUG] transformed V179Ma.SPC -> V179MA.SPC
[sigmove 09:44:39 DEBUG] transformed V179Mb.SPC -> V179MB.SPC
[sigmove 09:44:39 DEBUG] transformed V179Mc.SPC -> V179MC.SPC
[sigmove 09:44:39 DEBUG] transformed V179Md.SPC -> V179MD.SPC
[sigmove 09:44:39 DEBUG] transformed V179Me.SPC -> V179ME.SPC
[sigmove 09:44:39 DEBUG] transformed V179Mf.SPC -> V179MF.SPC
[Status 09:44:39 INFO] data for V179 transferred to science data processing
[Tidy 09:44:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:44:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:44:39 INFO] resetting WatchDogTimer
[Status 09:44:39 INFO] Starting Set [AERI set: name W179, 6 scans, 0 angle, D16300 command]
[Ingest 09:44:39 INFO] Sending XML status message
[Status 09:44:39 INFO] Mirror angle: 0
[Mirror 09:44:39 INFO] rotating to position W
[Status 09:44:40 INFO] .SET file for ACQ96 ready
[Ingest 09:44:40 INFO] Starting acquisition
[Status 09:44:40 INFO] reading housekeeping
[Status 09:44:58 INFO] acquire complete
[Status 09:44:59 INFO] writing housekeeping
[Sequencer 09:44:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:44:59 INFO] incremented W scene to 179 completed views
[Sequencer 09:44:59 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:44:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:44:59 INFO] incremented to [AERI set: name X179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:44:59 INFO] W179.SIG(18)
[sigmove 09:44:59 DEBUG] transformed W179Ma.SPC -> W179MA.SPC
[sigmove 09:44:59 DEBUG] transformed W179Mb.SPC -> W179MB.SPC
[sigmove 09:44:59 DEBUG] transformed W179Mc.SPC -> W179MC.SPC
[sigmove 09:44:59 DEBUG] transformed W179Md.SPC -> W179MD.SPC
[sigmove 09:44:59 DEBUG] transformed W179Me.SPC -> W179ME.SPC
[sigmove 09:44:59 DEBUG] transformed W179Mf.SPC -> W179MF.SPC
[Status 09:44:59 INFO] data for W179 transferred to science data processing
[Tidy 09:44:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:44:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:44:59 INFO] resetting WatchDogTimer
[Status 09:44:59 INFO] Starting Set [AERI set: name X179, 6 scans, 0 angle, D16300 command]
[Ingest 09:44:59 INFO] Sending XML status message
[Status 09:44:59 INFO] Mirror angle: 0
[Mirror 09:45:00 INFO] rotating to position X
[Status 09:45:00 INFO] .SET file for ACQ96 ready
[Ingest 09:45:00 INFO] Starting acquisition
[Status 09:45:00 INFO] reading housekeeping
[Status 09:45:19 INFO] acquire complete
[Status 09:45:19 INFO] writing housekeeping
[Sequencer 09:45:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:45:19 INFO] incremented X scene to 179 completed views
[Sequencer 09:45:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:45:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:45:19 INFO] incremented to [AERI set: name Y179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:45:19 INFO] X179.SIG(18)
[sigmove 09:45:19 DEBUG] transformed X179Ma.SPC -> X179MA.SPC
[sigmove 09:45:19 DEBUG] transformed X179Mb.SPC -> X179MB.SPC
[sigmove 09:45:19 DEBUG] transformed X179Mc.SPC -> X179MC.SPC
[sigmove 09:45:19 DEBUG] transformed X179Md.SPC -> X179MD.SPC
[sigmove 09:45:19 DEBUG] transformed X179Me.SPC -> X179ME.SPC
[sigmove 09:45:19 DEBUG] transformed X179Mf.SPC -> X179MF.SPC
[Status 09:45:19 INFO] data for X179 transferred to science data processing
[Tidy 09:45:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:45:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:45:19 INFO] resetting WatchDogTimer
[Status 09:45:19 INFO] Starting Set [AERI set: name Y179, 6 scans, 0 angle, D16300 command]
[Ingest 09:45:19 INFO] Sending XML status message
[Status 09:45:19 INFO] Mirror angle: 0
[Mirror 09:45:20 INFO] rotating to position Y
[Status 09:45:20 INFO] .SET file for ACQ96 ready
[Ingest 09:45:20 INFO] Starting acquisition
[Status 09:45:21 INFO] reading housekeeping
[Status 09:45:39 INFO] acquire complete
[Status 09:45:39 INFO] writing housekeeping
[Sequencer 09:45:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:45:39 INFO] incremented Y scene to 179 completed views
[Sequencer 09:45:39 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:45:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:45:39 INFO] incremented to [AERI set: name Z179, 6 scans, 0 angle, D16300 command] set
[sigmove 09:45:39 INFO] Y179.SIG(18)
[sigmove 09:45:39 DEBUG] transformed Y179Ma.SPC -> Y179MA.SPC
[sigmove 09:45:39 DEBUG] transformed Y179Mb.SPC -> Y179MB.SPC
[sigmove 09:45:39 DEBUG] transformed Y179Mc.SPC -> Y179MC.SPC
[sigmove 09:45:39 DEBUG] transformed Y179Md.SPC -> Y179MD.SPC
[sigmove 09:45:39 DEBUG] transformed Y179Me.SPC -> Y179ME.SPC
[sigmove 09:45:39 DEBUG] transformed Y179Mf.SPC -> Y179MF.SPC
[Status 09:45:39 INFO] data for Y179 transferred to science data processing
[Tidy 09:45:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:45:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:45:39 INFO] resetting WatchDogTimer
[Status 09:45:40 INFO] Starting Set [AERI set: name Z179, 6 scans, 0 angle, D16300 command]
[Ingest 09:45:40 INFO] Sending XML status message
[Status 09:45:40 INFO] Mirror angle: 0
[Mirror 09:45:40 INFO] rotating to position Z
[Status 09:45:40 INFO] .SET file for ACQ96 ready
[Ingest 09:45:40 INFO] Starting acquisition
[Status 09:45:41 INFO] reading housekeeping
[Status 09:45:59 INFO] acquire complete
[Status 09:46:00 INFO] writing housekeeping
[Sequencer 09:46:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:46:00 INFO] incremented Z scene to 179 completed views
[Sequencer 09:46:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:46:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:46:00 INFO] incremented to [AERI set: name A180, 6 scans, 120 angle, D28300 command] set
[sigmove 09:46:00 INFO] Z179.SIG(18)
[sigmove 09:46:00 DEBUG] transformed Z179Ma.SPC -> Z179MA.SPC
[sigmove 09:46:00 DEBUG] transformed Z179Mb.SPC -> Z179MB.SPC
[sigmove 09:46:00 DEBUG] transformed Z179Mc.SPC -> Z179MC.SPC
[sigmove 09:46:00 DEBUG] transformed Z179Md.SPC -> Z179MD.SPC
[sigmove 09:46:00 DEBUG] transformed Z179Me.SPC -> Z179ME.SPC
[sigmove 09:46:00 DEBUG] transformed Z179Mf.SPC -> Z179MF.SPC
[Status 09:46:00 INFO] data for Z179 transferred to science data processing
[Tidy 09:46:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:46:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:46:00 INFO] resetting WatchDogTimer
[Status 09:46:00 INFO] Starting Set [AERI set: name A180, 6 scans, 120 angle, D28300 command]
[Ingest 09:46:00 INFO] Sending XML status message
[Status 09:46:00 INFO] Mirror angle: 120
[Mirror 09:46:00 INFO] rotating to position A
[Status 09:46:02 INFO] .SET file for ACQ96 ready
[Ingest 09:46:02 INFO] Starting acquisition
[Status 09:46:02 INFO] reading housekeeping
[Status 09:46:20 INFO] acquire complete
[Status 09:46:21 INFO] writing housekeeping
[Sequencer 09:46:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:46:21 INFO] incremented A scene to 180 completed views
[Sequencer 09:46:21 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:46:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:46:21 INFO] incremented to [AERI set: name H180, 6 scans, 60 angle, D22500 command] set
[sigmove 09:46:21 INFO] A180.SIG(18)
[sigmove 09:46:21 DEBUG] transformed A180Ma.SPC -> A180MA.SPC
[sigmove 09:46:21 DEBUG] transformed A180Mb.SPC -> A180MB.SPC
[sigmove 09:46:21 DEBUG] transformed A180Mc.SPC -> A180MC.SPC
[sigmove 09:46:21 DEBUG] transformed A180Md.SPC -> A180MD.SPC
[sigmove 09:46:21 DEBUG] transformed A180Me.SPC -> A180ME.SPC
[sigmove 09:46:21 DEBUG] transformed A180Mf.SPC -> A180MF.SPC
[Status 09:46:21 INFO] data for A180 transferred to science data processing
[Tidy 09:46:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:46:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:46:21 INFO] resetting WatchDogTimer
[Status 09:46:21 INFO] Starting Set [AERI set: name H180, 6 scans, 60 angle, D22500 command]
[Ingest 09:46:21 INFO] Sending XML status message
[Status 09:46:21 INFO] Mirror angle: 60
[Mirror 09:46:21 INFO] rotating to position H
[Status 09:46:22 INFO] .SET file for ACQ96 ready
[Ingest 09:46:23 INFO] Starting acquisition
[Status 09:46:23 INFO] reading housekeeping
[Status 09:46:40 INFO] acquire complete
[Status 09:46:41 INFO] writing housekeeping
[Sequencer 09:46:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:46:41 INFO] incremented H scene to 180 completed views
[Sequencer 09:46:41 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:46:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:46:41 INFO] incremented to [AERI set: name S180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:46:41 INFO] H180.SIG(18)
[sigmove 09:46:41 DEBUG] transformed H180Ma.SPC -> H180MA.SPC
[sigmove 09:46:41 DEBUG] transformed H180Mb.SPC -> H180MB.SPC
[sigmove 09:46:41 DEBUG] transformed H180Mc.SPC -> H180MC.SPC
[sigmove 09:46:41 DEBUG] transformed H180Md.SPC -> H180MD.SPC
[sigmove 09:46:41 DEBUG] transformed H180Me.SPC -> H180ME.SPC
[sigmove 09:46:41 DEBUG] transformed H180Mf.SPC -> H180MF.SPC
[Status 09:46:41 INFO] data for H180 transferred to science data processing
[Tidy 09:46:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:46:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:46:41 INFO] resetting WatchDogTimer
[Status 09:46:41 INFO] Starting Set [AERI set: name S180, 6 scans, 0 angle, D16300 command]
[Ingest 09:46:41 INFO] Sending XML status message
[Status 09:46:41 INFO] Mirror angle: 0
[Mirror 09:46:42 INFO] rotating to position S
[Status 09:46:43 INFO] .SET file for ACQ96 ready
[Ingest 09:46:43 INFO] Starting acquisition
[Status 09:46:43 INFO] reading housekeeping
[Status 09:47:01 INFO] acquire complete
[Status 09:47:01 INFO] writing housekeeping
[Sequencer 09:47:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:47:01 INFO] incremented S scene to 180 completed views
[Sequencer 09:47:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:47:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:47:01 INFO] incremented to [AERI set: name T180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:47:01 INFO] S180.SIG(18)
[sigmove 09:47:01 DEBUG] transformed S180Ma.SPC -> S180MA.SPC
[sigmove 09:47:01 DEBUG] transformed S180Mb.SPC -> S180MB.SPC
[sigmove 09:47:01 DEBUG] transformed S180Mc.SPC -> S180MC.SPC
[sigmove 09:47:01 DEBUG] transformed S180Md.SPC -> S180MD.SPC
[sigmove 09:47:01 DEBUG] transformed S180Me.SPC -> S180ME.SPC
[sigmove 09:47:01 DEBUG] transformed S180Mf.SPC -> S180MF.SPC
[Status 09:47:01 INFO] data for S180 transferred to science data processing
[Tidy 09:47:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:47:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:47:01 INFO] resetting WatchDogTimer
[Status 09:47:02 INFO] Starting Set [AERI set: name T180, 6 scans, 0 angle, D16300 command]
[Ingest 09:47:02 INFO] Sending XML status message
[Status 09:47:02 INFO] Mirror angle: 0
[Mirror 09:47:02 INFO] rotating to position T
[Status 09:47:02 INFO] .SET file for ACQ96 ready
[Ingest 09:47:02 INFO] Starting acquisition
[Status 09:47:03 INFO] reading housekeeping
[Status 09:47:21 INFO] acquire complete
[Status 09:47:21 INFO] writing housekeeping
[Sequencer 09:47:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:47:21 INFO] incremented T scene to 180 completed views
[Sequencer 09:47:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:47:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:47:22 INFO] incremented to [AERI set: name U180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:47:22 INFO] T180.SIG(18)
[sigmove 09:47:22 DEBUG] transformed T180Ma.SPC -> T180MA.SPC
[sigmove 09:47:22 DEBUG] transformed T180Mb.SPC -> T180MB.SPC
[sigmove 09:47:22 DEBUG] transformed T180Mc.SPC -> T180MC.SPC
[sigmove 09:47:22 DEBUG] transformed T180Md.SPC -> T180MD.SPC
[sigmove 09:47:22 DEBUG] transformed T180Me.SPC -> T180ME.SPC
[sigmove 09:47:22 DEBUG] transformed T180Mf.SPC -> T180MF.SPC
[Status 09:47:22 INFO] data for T180 transferred to science data processing
[Tidy 09:47:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:47:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:47:22 INFO] resetting WatchDogTimer
[Status 09:47:22 INFO] Starting Set [AERI set: name U180, 6 scans, 0 angle, D16300 command]
[Ingest 09:47:22 INFO] Sending XML status message
[Status 09:47:22 INFO] Mirror angle: 0
[Mirror 09:47:22 INFO] rotating to position U
[Status 09:47:22 INFO] .SET file for ACQ96 ready
[Ingest 09:47:23 INFO] Starting acquisition
[Status 09:47:23 INFO] reading housekeeping
[Status 09:47:41 INFO] acquire complete
[Status 09:47:42 INFO] writing housekeeping
[Sequencer 09:47:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:47:42 INFO] incremented U scene to 180 completed views
[Sequencer 09:47:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:47:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:47:42 INFO] incremented to [AERI set: name V180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:47:42 INFO] U180.SIG(18)
[sigmove 09:47:42 DEBUG] transformed U180Ma.SPC -> U180MA.SPC
[sigmove 09:47:42 DEBUG] transformed U180Mb.SPC -> U180MB.SPC
[sigmove 09:47:42 DEBUG] transformed U180Mc.SPC -> U180MC.SPC
[sigmove 09:47:42 DEBUG] transformed U180Md.SPC -> U180MD.SPC
[sigmove 09:47:42 DEBUG] transformed U180Me.SPC -> U180ME.SPC
[sigmove 09:47:42 DEBUG] transformed U180Mf.SPC -> U180MF.SPC
[Status 09:47:42 INFO] data for U180 transferred to science data processing
[Tidy 09:47:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:47:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:47:42 INFO] resetting WatchDogTimer
[Status 09:47:42 INFO] Starting Set [AERI set: name V180, 6 scans, 0 angle, D16300 command]
[Ingest 09:47:42 INFO] Sending XML status message
[Status 09:47:42 INFO] Mirror angle: 0
[Mirror 09:47:42 INFO] rotating to position V
[Status 09:47:43 INFO] .SET file for ACQ96 ready
[Ingest 09:47:43 INFO] Starting acquisition
[Status 09:47:43 INFO] reading housekeeping
[Status 09:48:01 INFO] acquire complete
[Status 09:48:02 INFO] writing housekeeping
[Sequencer 09:48:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:48:02 INFO] incremented V scene to 180 completed views
[Sequencer 09:48:02 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:48:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:48:02 INFO] incremented to [AERI set: name W180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:48:02 INFO] V180.SIG(18)
[sigmove 09:48:02 DEBUG] transformed V180Ma.SPC -> V180MA.SPC
[sigmove 09:48:02 DEBUG] transformed V180Mb.SPC -> V180MB.SPC
[sigmove 09:48:02 DEBUG] transformed V180Mc.SPC -> V180MC.SPC
[sigmove 09:48:02 DEBUG] transformed V180Md.SPC -> V180MD.SPC
[sigmove 09:48:02 DEBUG] transformed V180Me.SPC -> V180ME.SPC
[sigmove 09:48:02 DEBUG] transformed V180Mf.SPC -> V180MF.SPC
[Status 09:48:02 INFO] data for V180 transferred to science data processing
[Tidy 09:48:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:48:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:48:02 INFO] resetting WatchDogTimer
[Status 09:48:02 INFO] Starting Set [AERI set: name W180, 6 scans, 0 angle, D16300 command]
[Ingest 09:48:02 INFO] Sending XML status message
[Status 09:48:02 INFO] Mirror angle: 0
[Mirror 09:48:02 INFO] rotating to position W
[Status 09:48:03 INFO] .SET file for ACQ96 ready
[Ingest 09:48:03 INFO] Starting acquisition
[Status 09:48:03 INFO] reading housekeeping
[Status 09:48:21 INFO] acquire complete
[Status 09:48:22 INFO] writing housekeeping
[Sequencer 09:48:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:48:22 INFO] incremented W scene to 180 completed views
[Sequencer 09:48:22 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:48:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:48:22 INFO] incremented to [AERI set: name X180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:48:22 INFO] W180.SIG(18)
[sigmove 09:48:22 DEBUG] transformed W180Ma.SPC -> W180MA.SPC
[sigmove 09:48:22 DEBUG] transformed W180Mb.SPC -> W180MB.SPC
[sigmove 09:48:22 DEBUG] transformed W180Mc.SPC -> W180MC.SPC
[sigmove 09:48:22 DEBUG] transformed W180Md.SPC -> W180MD.SPC
[sigmove 09:48:22 DEBUG] transformed W180Me.SPC -> W180ME.SPC
[sigmove 09:48:22 DEBUG] transformed W180Mf.SPC -> W180MF.SPC
[Status 09:48:22 INFO] data for W180 transferred to science data processing
[Tidy 09:48:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:48:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:48:22 INFO] resetting WatchDogTimer
[Status 09:48:22 INFO] Starting Set [AERI set: name X180, 6 scans, 0 angle, D16300 command]
[Ingest 09:48:22 INFO] Sending XML status message
[Status 09:48:22 INFO] Mirror angle: 0
[Mirror 09:48:23 INFO] rotating to position X
[Status 09:48:23 INFO] .SET file for ACQ96 ready
[Ingest 09:48:23 INFO] Starting acquisition
[Status 09:48:23 INFO] reading housekeeping
[Status 09:48:42 INFO] acquire complete
[Status 09:48:42 INFO] writing housekeeping
[Sequencer 09:48:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:48:42 INFO] incremented X scene to 180 completed views
[Sequencer 09:48:42 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:48:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:48:42 INFO] incremented to [AERI set: name Y180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:48:42 INFO] X180.SIG(18)
[sigmove 09:48:42 DEBUG] transformed X180Ma.SPC -> X180MA.SPC
[sigmove 09:48:42 DEBUG] transformed X180Mb.SPC -> X180MB.SPC
[sigmove 09:48:42 DEBUG] transformed X180Mc.SPC -> X180MC.SPC
[sigmove 09:48:42 DEBUG] transformed X180Md.SPC -> X180MD.SPC
[sigmove 09:48:42 DEBUG] transformed X180Me.SPC -> X180ME.SPC
[sigmove 09:48:42 DEBUG] transformed X180Mf.SPC -> X180MF.SPC
[Status 09:48:42 INFO] data for X180 transferred to science data processing
[Tidy 09:48:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:48:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:48:42 INFO] resetting WatchDogTimer
[Status 09:48:43 INFO] Starting Set [AERI set: name Y180, 6 scans, 0 angle, D16300 command]
[Ingest 09:48:43 INFO] Sending XML status message
[Status 09:48:43 INFO] Mirror angle: 0
[Mirror 09:48:43 INFO] rotating to position Y
[Status 09:48:43 INFO] .SET file for ACQ96 ready
[Ingest 09:48:43 INFO] Starting acquisition
[Status 09:48:44 INFO] reading housekeeping
[Status 09:49:02 INFO] acquire complete
[Status 09:49:02 INFO] writing housekeeping
[Sequencer 09:49:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:49:02 INFO] incremented Y scene to 180 completed views
[Sequencer 09:49:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:49:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:49:02 INFO] incremented to [AERI set: name Z180, 6 scans, 0 angle, D16300 command] set
[sigmove 09:49:02 INFO] Y180.SIG(18)
[sigmove 09:49:02 DEBUG] transformed Y180Ma.SPC -> Y180MA.SPC
[sigmove 09:49:02 DEBUG] transformed Y180Mb.SPC -> Y180MB.SPC
[sigmove 09:49:02 DEBUG] transformed Y180Mc.SPC -> Y180MC.SPC
[sigmove 09:49:02 DEBUG] transformed Y180Md.SPC -> Y180MD.SPC
[sigmove 09:49:02 DEBUG] transformed Y180Me.SPC -> Y180ME.SPC
[sigmove 09:49:02 DEBUG] transformed Y180Mf.SPC -> Y180MF.SPC
[Status 09:49:03 INFO] data for Y180 transferred to science data processing
[Tidy 09:49:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:49:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:49:03 INFO] resetting WatchDogTimer
[Status 09:49:03 INFO] Starting Set [AERI set: name Z180, 6 scans, 0 angle, D16300 command]
[Ingest 09:49:03 INFO] Sending XML status message
[Status 09:49:03 INFO] Mirror angle: 0
[Mirror 09:49:03 INFO] rotating to position Z
[Status 09:49:03 INFO] .SET file for ACQ96 ready
[Ingest 09:49:04 INFO] Starting acquisition
[Status 09:49:04 INFO] reading housekeeping
[Status 09:49:22 INFO] acquire complete
[Status 09:49:23 INFO] writing housekeeping
[Sequencer 09:49:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:49:23 INFO] incremented Z scene to 180 completed views
[Sequencer 09:49:23 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:49:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:49:23 INFO] incremented to [AERI set: name H181, 6 scans, 60 angle, D22500 command] set
[sigmove 09:49:23 INFO] Z180.SIG(18)
[sigmove 09:49:23 DEBUG] transformed Z180Ma.SPC -> Z180MA.SPC
[sigmove 09:49:23 DEBUG] transformed Z180Mb.SPC -> Z180MB.SPC
[sigmove 09:49:23 DEBUG] transformed Z180Mc.SPC -> Z180MC.SPC
[sigmove 09:49:23 DEBUG] transformed Z180Md.SPC -> Z180MD.SPC
[sigmove 09:49:23 DEBUG] transformed Z180Me.SPC -> Z180ME.SPC
[sigmove 09:49:23 DEBUG] transformed Z180Mf.SPC -> Z180MF.SPC
[Status 09:49:23 INFO] data for Z180 transferred to science data processing
[Tidy 09:49:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:49:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:49:23 INFO] resetting WatchDogTimer
[Status 09:49:23 INFO] Starting Set [AERI set: name H181, 6 scans, 60 angle, D22500 command]
[Ingest 09:49:23 INFO] Sending XML status message
[Status 09:49:23 INFO] Mirror angle: 60
[Mirror 09:49:23 INFO] rotating to position H
[Status 09:49:24 INFO] .SET file for ACQ96 ready
[Ingest 09:49:24 INFO] Starting acquisition
[Status 09:49:25 INFO] reading housekeeping
[Status 09:49:42 INFO] acquire complete
[Status 09:49:43 INFO] writing housekeeping
[Sequencer 09:49:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:49:43 INFO] incremented H scene to 181 completed views
[Sequencer 09:49:43 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:49:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:49:43 INFO] incremented to [AERI set: name A181, 6 scans, 120 angle, D28300 command] set
[sigmove 09:49:43 INFO] H181.SIG(18)
[sigmove 09:49:43 DEBUG] transformed H181Ma.SPC -> H181MA.SPC
[sigmove 09:49:43 DEBUG] transformed H181Mb.SPC -> H181MB.SPC
[sigmove 09:49:43 DEBUG] transformed H181Mc.SPC -> H181MC.SPC
[sigmove 09:49:43 DEBUG] transformed H181Md.SPC -> H181MD.SPC
[sigmove 09:49:43 DEBUG] transformed H181Me.SPC -> H181ME.SPC
[sigmove 09:49:43 DEBUG] transformed H181Mf.SPC -> H181MF.SPC
[Status 09:49:43 INFO] data for H181 transferred to science data processing
[Tidy 09:49:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:49:43 INFO] A179.FIN(19),H179.FIN(19),S179.FIN(19),T179.FIN(19),U179.FIN(19),V179.FIN(19),W179.FIN(19),X179.FIN(19),Y179.FIN(19),Z179.FIN(19),A180.FIN(19),H180.FIN(19),S180.FIN(19),T180.FIN(19),U180.FIN(19),V180.FIN(19),W180.FIN(19),X180.FIN(19),Y180.FIN(19),Z180.FIN(19)
[sigmove 09:49:43 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:49:43 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:49:46 DEBUG] done zipping
[WatchDog 09:49:46 INFO] resetting WatchDogTimer
[Status 09:49:47 INFO] Starting Set [AERI set: name A181, 6 scans, 120 angle, D28300 command]
[Ingest 09:49:47 INFO] Sending XML status message
[Status 09:49:47 INFO] Mirror angle: 120
[Mirror 09:49:47 INFO] rotating to position A
[Status 09:49:48 INFO] .SET file for ACQ96 ready
[Ingest 09:49:48 INFO] Starting acquisition
[Status 09:49:48 INFO] reading housekeeping
[Status 09:50:06 INFO] acquire complete
[Status 09:50:06 INFO] writing housekeeping
[Sequencer 09:50:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:50:06 INFO] incremented A scene to 181 completed views
[Sequencer 09:50:06 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:50:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:50:06 INFO] incremented to [AERI set: name S181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:50:06 INFO] A181.SIG(18)
[sigmove 09:50:06 DEBUG] transformed A181Ma.SPC -> A181MA.SPC
[sigmove 09:50:06 DEBUG] transformed A181Mb.SPC -> A181MB.SPC
[sigmove 09:50:06 DEBUG] transformed A181Mc.SPC -> A181MC.SPC
[sigmove 09:50:06 DEBUG] transformed A181Md.SPC -> A181MD.SPC
[sigmove 09:50:06 DEBUG] transformed A181Me.SPC -> A181ME.SPC
[sigmove 09:50:06 DEBUG] transformed A181Mf.SPC -> A181MF.SPC
[Status 09:50:06 INFO] data for A181 transferred to science data processing
[Tidy 09:50:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:50:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:50:06 INFO] resetting WatchDogTimer
[Status 09:50:07 INFO] Starting Set [AERI set: name S181, 6 scans, 0 angle, D16300 command]
[Ingest 09:50:07 INFO] Sending XML status message
[Status 09:50:07 INFO] Mirror angle: 0
[Mirror 09:50:07 INFO] rotating to position S
[Status 09:50:08 INFO] .SET file for ACQ96 ready
[Ingest 09:50:09 INFO] Starting acquisition
[Status 09:50:09 INFO] reading housekeeping
[Status 09:50:27 INFO] acquire complete
[Status 09:50:28 INFO] writing housekeeping
[Sequencer 09:50:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:50:28 INFO] incremented S scene to 181 completed views
[Sequencer 09:50:28 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:50:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:50:28 INFO] incremented to [AERI set: name T181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:50:28 INFO] S181.SIG(18)
[sigmove 09:50:28 DEBUG] transformed S181Ma.SPC -> S181MA.SPC
[sigmove 09:50:28 DEBUG] transformed S181Mb.SPC -> S181MB.SPC
[sigmove 09:50:28 DEBUG] transformed S181Mc.SPC -> S181MC.SPC
[sigmove 09:50:28 DEBUG] transformed S181Md.SPC -> S181MD.SPC
[sigmove 09:50:28 DEBUG] transformed S181Me.SPC -> S181ME.SPC
[sigmove 09:50:28 DEBUG] transformed S181Mf.SPC -> S181MF.SPC
[Status 09:50:28 INFO] data for S181 transferred to science data processing
[Tidy 09:50:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:50:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:50:28 INFO] resetting WatchDogTimer
[Status 09:50:28 INFO] Starting Set [AERI set: name T181, 6 scans, 0 angle, D16300 command]
[Ingest 09:50:28 INFO] Sending XML status message
[Status 09:50:28 INFO] Mirror angle: 0
[Mirror 09:50:28 INFO] rotating to position T
[Status 09:50:29 INFO] .SET file for ACQ96 ready
[Ingest 09:50:29 INFO] Starting acquisition
[Status 09:50:29 INFO] reading housekeeping
[Status 09:50:47 INFO] acquire complete
[Status 09:50:48 INFO] writing housekeeping
[Sequencer 09:50:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:50:48 INFO] incremented T scene to 181 completed views
[Sequencer 09:50:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:50:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:50:48 INFO] incremented to [AERI set: name U181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:50:48 INFO] T181.SIG(18)
[sigmove 09:50:48 DEBUG] transformed T181Ma.SPC -> T181MA.SPC
[sigmove 09:50:48 DEBUG] transformed T181Mb.SPC -> T181MB.SPC
[sigmove 09:50:48 DEBUG] transformed T181Mc.SPC -> T181MC.SPC
[sigmove 09:50:48 DEBUG] transformed T181Md.SPC -> T181MD.SPC
[sigmove 09:50:48 DEBUG] transformed T181Me.SPC -> T181ME.SPC
[sigmove 09:50:48 DEBUG] transformed T181Mf.SPC -> T181MF.SPC
[Status 09:50:48 INFO] data for T181 transferred to science data processing
[Tidy 09:50:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:50:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:50:48 INFO] resetting WatchDogTimer
[Status 09:50:48 INFO] Starting Set [AERI set: name U181, 6 scans, 0 angle, D16300 command]
[Ingest 09:50:48 INFO] Sending XML status message
[Status 09:50:48 INFO] Mirror angle: 0
[Mirror 09:50:48 INFO] rotating to position U
[Status 09:50:49 INFO] .SET file for ACQ96 ready
[Ingest 09:50:49 INFO] Starting acquisition
[Status 09:50:49 INFO] reading housekeeping
[Status 09:51:07 INFO] acquire complete
[Status 09:51:08 INFO] writing housekeeping
[Sequencer 09:51:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:51:08 INFO] incremented U scene to 181 completed views
[Sequencer 09:51:08 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:51:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:51:08 INFO] incremented to [AERI set: name V181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:51:08 INFO] U181.SIG(18)
[sigmove 09:51:08 DEBUG] transformed U181Ma.SPC -> U181MA.SPC
[sigmove 09:51:08 DEBUG] transformed U181Mb.SPC -> U181MB.SPC
[sigmove 09:51:08 DEBUG] transformed U181Mc.SPC -> U181MC.SPC
[sigmove 09:51:08 DEBUG] transformed U181Md.SPC -> U181MD.SPC
[sigmove 09:51:08 DEBUG] transformed U181Me.SPC -> U181ME.SPC
[sigmove 09:51:08 DEBUG] transformed U181Mf.SPC -> U181MF.SPC
[Status 09:51:08 INFO] data for U181 transferred to science data processing
[Tidy 09:51:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:51:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:51:08 INFO] resetting WatchDogTimer
[Status 09:51:08 INFO] Starting Set [AERI set: name V181, 6 scans, 0 angle, D16300 command]
[Ingest 09:51:08 INFO] Sending XML status message
[Status 09:51:08 INFO] Mirror angle: 0
[Mirror 09:51:09 INFO] rotating to position V
[Status 09:51:09 INFO] .SET file for ACQ96 ready
[Ingest 09:51:09 INFO] Starting acquisition
[Status 09:51:10 INFO] reading housekeeping
[Status 09:51:28 INFO] acquire complete
[Status 09:51:28 INFO] writing housekeeping
[Sequencer 09:51:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:51:28 INFO] incremented V scene to 181 completed views
[Sequencer 09:51:28 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:51:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:51:28 INFO] incremented to [AERI set: name W181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:51:28 INFO] V181.SIG(18)
[sigmove 09:51:28 DEBUG] transformed V181Ma.SPC -> V181MA.SPC
[sigmove 09:51:28 DEBUG] transformed V181Mb.SPC -> V181MB.SPC
[sigmove 09:51:28 DEBUG] transformed V181Mc.SPC -> V181MC.SPC
[sigmove 09:51:28 DEBUG] transformed V181Md.SPC -> V181MD.SPC
[sigmove 09:51:28 DEBUG] transformed V181Me.SPC -> V181ME.SPC
[sigmove 09:51:28 DEBUG] transformed V181Mf.SPC -> V181MF.SPC
[Status 09:51:28 INFO] data for V181 transferred to science data processing
[Tidy 09:51:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:51:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:51:28 INFO] resetting WatchDogTimer
[Status 09:51:29 INFO] Starting Set [AERI set: name W181, 6 scans, 0 angle, D16300 command]
[Ingest 09:51:29 INFO] Sending XML status message
[Status 09:51:29 INFO] Mirror angle: 0
[Mirror 09:51:29 INFO] rotating to position W
[Status 09:51:29 INFO] .SET file for ACQ96 ready
[Ingest 09:51:29 INFO] Starting acquisition
[Status 09:51:30 INFO] reading housekeeping
[Status 09:51:48 INFO] acquire complete
[Status 09:51:49 INFO] writing housekeeping
[Sequencer 09:51:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:51:49 INFO] incremented W scene to 181 completed views
[Sequencer 09:51:49 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:51:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:51:49 INFO] incremented to [AERI set: name X181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:51:49 INFO] W181.SIG(18)
[sigmove 09:51:49 DEBUG] transformed W181Ma.SPC -> W181MA.SPC
[sigmove 09:51:49 DEBUG] transformed W181Mb.SPC -> W181MB.SPC
[sigmove 09:51:49 DEBUG] transformed W181Mc.SPC -> W181MC.SPC
[sigmove 09:51:49 DEBUG] transformed W181Md.SPC -> W181MD.SPC
[sigmove 09:51:49 DEBUG] transformed W181Me.SPC -> W181ME.SPC
[sigmove 09:51:49 DEBUG] transformed W181Mf.SPC -> W181MF.SPC
[Status 09:51:49 INFO] data for W181 transferred to science data processing
[Tidy 09:51:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:51:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:51:49 INFO] resetting WatchDogTimer
[Status 09:51:49 INFO] Starting Set [AERI set: name X181, 6 scans, 0 angle, D16300 command]
[Ingest 09:51:49 INFO] Sending XML status message
[Status 09:51:49 INFO] Mirror angle: 0
[Mirror 09:51:49 INFO] rotating to position X
[Status 09:51:49 INFO] .SET file for ACQ96 ready
[Ingest 09:51:50 INFO] Starting acquisition
[Status 09:51:50 INFO] reading housekeeping
[Status 09:52:08 INFO] acquire complete
[Status 09:52:09 INFO] writing housekeeping
[Sequencer 09:52:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:52:09 INFO] incremented X scene to 181 completed views
[Sequencer 09:52:09 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:52:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:52:09 INFO] incremented to [AERI set: name Y181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:52:09 INFO] X181.SIG(18)
[sigmove 09:52:09 DEBUG] transformed X181Ma.SPC -> X181MA.SPC
[sigmove 09:52:09 DEBUG] transformed X181Mb.SPC -> X181MB.SPC
[sigmove 09:52:09 DEBUG] transformed X181Mc.SPC -> X181MC.SPC
[sigmove 09:52:09 DEBUG] transformed X181Md.SPC -> X181MD.SPC
[sigmove 09:52:09 DEBUG] transformed X181Me.SPC -> X181ME.SPC
[sigmove 09:52:09 DEBUG] transformed X181Mf.SPC -> X181MF.SPC
[Status 09:52:09 INFO] data for X181 transferred to science data processing
[Tidy 09:52:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:52:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:52:09 INFO] resetting WatchDogTimer
[Status 09:52:09 INFO] Starting Set [AERI set: name Y181, 6 scans, 0 angle, D16300 command]
[Ingest 09:52:09 INFO] Sending XML status message
[Status 09:52:09 INFO] Mirror angle: 0
[Mirror 09:52:09 INFO] rotating to position Y
[Status 09:52:10 INFO] .SET file for ACQ96 ready
[Ingest 09:52:10 INFO] Starting acquisition
[Status 09:52:10 INFO] reading housekeeping
[Status 09:52:28 INFO] acquire complete
[Status 09:52:29 INFO] writing housekeeping
[Sequencer 09:52:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:52:29 INFO] incremented Y scene to 181 completed views
[Sequencer 09:52:29 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:52:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:52:29 INFO] incremented to [AERI set: name Z181, 6 scans, 0 angle, D16300 command] set
[sigmove 09:52:29 INFO] Y181.SIG(18)
[sigmove 09:52:29 DEBUG] transformed Y181Ma.SPC -> Y181MA.SPC
[sigmove 09:52:29 DEBUG] transformed Y181Mb.SPC -> Y181MB.SPC
[sigmove 09:52:29 DEBUG] transformed Y181Mc.SPC -> Y181MC.SPC
[sigmove 09:52:29 DEBUG] transformed Y181Md.SPC -> Y181MD.SPC
[sigmove 09:52:29 DEBUG] transformed Y181Me.SPC -> Y181ME.SPC
[sigmove 09:52:29 DEBUG] transformed Y181Mf.SPC -> Y181MF.SPC
[Status 09:52:29 INFO] data for Y181 transferred to science data processing
[Tidy 09:52:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:52:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:52:29 INFO] resetting WatchDogTimer
[Status 09:52:29 INFO] Starting Set [AERI set: name Z181, 6 scans, 0 angle, D16300 command]
[Ingest 09:52:29 INFO] Sending XML status message
[Status 09:52:29 INFO] Mirror angle: 0
[Mirror 09:52:29 INFO] rotating to position Z
[Status 09:52:30 INFO] .SET file for ACQ96 ready
[Ingest 09:52:30 INFO] Starting acquisition
[Status 09:52:30 INFO] reading housekeeping
[Status 09:52:48 INFO] acquire complete
[Status 09:52:49 INFO] writing housekeeping
[Sequencer 09:52:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:52:49 INFO] incremented Z scene to 181 completed views
[Sequencer 09:52:49 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:52:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:52:49 INFO] incremented to [AERI set: name A182, 6 scans, 120 angle, D28300 command] set
[sigmove 09:52:49 INFO] Z181.SIG(18)
[sigmove 09:52:49 DEBUG] transformed Z181Ma.SPC -> Z181MA.SPC
[sigmove 09:52:49 DEBUG] transformed Z181Mb.SPC -> Z181MB.SPC
[sigmove 09:52:49 DEBUG] transformed Z181Mc.SPC -> Z181MC.SPC
[sigmove 09:52:49 DEBUG] transformed Z181Md.SPC -> Z181MD.SPC
[sigmove 09:52:49 DEBUG] transformed Z181Me.SPC -> Z181ME.SPC
[sigmove 09:52:49 DEBUG] transformed Z181Mf.SPC -> Z181MF.SPC
[Status 09:52:49 INFO] data for Z181 transferred to science data processing
[Tidy 09:52:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:52:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:52:49 INFO] resetting WatchDogTimer
[Status 09:52:49 INFO] Starting Set [AERI set: name A182, 6 scans, 120 angle, D28300 command]
[Ingest 09:52:49 INFO] Sending XML status message
[Status 09:52:49 INFO] Mirror angle: 120
[Mirror 09:52:50 INFO] rotating to position A
[Status 09:52:51 INFO] .SET file for ACQ96 ready
[Ingest 09:52:51 INFO] Starting acquisition
[Status 09:52:51 INFO] reading housekeeping
[Status 09:53:10 INFO] acquire complete
[Status 09:53:10 INFO] writing housekeeping
[Sequencer 09:53:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:53:10 INFO] incremented A scene to 182 completed views
[Sequencer 09:53:10 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:53:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:53:10 INFO] incremented to [AERI set: name H182, 6 scans, 60 angle, D22500 command] set
[sigmove 09:53:10 INFO] A182.SIG(18)
[sigmove 09:53:10 DEBUG] transformed A182Ma.SPC -> A182MA.SPC
[sigmove 09:53:10 DEBUG] transformed A182Mb.SPC -> A182MB.SPC
[sigmove 09:53:10 DEBUG] transformed A182Mc.SPC -> A182MC.SPC
[sigmove 09:53:10 DEBUG] transformed A182Md.SPC -> A182MD.SPC
[sigmove 09:53:10 DEBUG] transformed A182Me.SPC -> A182ME.SPC
[sigmove 09:53:10 DEBUG] transformed A182Mf.SPC -> A182MF.SPC
[Status 09:53:10 INFO] data for A182 transferred to science data processing
[Tidy 09:53:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:53:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:53:10 INFO] resetting WatchDogTimer
[Status 09:53:11 INFO] Starting Set [AERI set: name H182, 6 scans, 60 angle, D22500 command]
[Ingest 09:53:11 INFO] Sending XML status message
[Status 09:53:11 INFO] Mirror angle: 60
[Mirror 09:53:11 INFO] rotating to position H
[Status 09:53:12 INFO] .SET file for ACQ96 ready
[Ingest 09:53:12 INFO] Starting acquisition
[Status 09:53:12 INFO] reading housekeeping
[Status 09:53:30 INFO] acquire complete
[Status 09:53:31 INFO] writing housekeeping
[Sequencer 09:53:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:53:31 INFO] incremented H scene to 182 completed views
[Sequencer 09:53:31 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:53:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:53:31 INFO] incremented to [AERI set: name S182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:53:31 INFO] H182.SIG(18)
[sigmove 09:53:31 DEBUG] transformed H182Ma.SPC -> H182MA.SPC
[sigmove 09:53:31 DEBUG] transformed H182Mb.SPC -> H182MB.SPC
[sigmove 09:53:31 DEBUG] transformed H182Mc.SPC -> H182MC.SPC
[sigmove 09:53:31 DEBUG] transformed H182Md.SPC -> H182MD.SPC
[sigmove 09:53:31 DEBUG] transformed H182Me.SPC -> H182ME.SPC
[sigmove 09:53:31 DEBUG] transformed H182Mf.SPC -> H182MF.SPC
[Status 09:53:31 INFO] data for H182 transferred to science data processing
[Tidy 09:53:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:53:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:53:31 INFO] resetting WatchDogTimer
[Status 09:53:31 INFO] Starting Set [AERI set: name S182, 6 scans, 0 angle, D16300 command]
[Ingest 09:53:31 INFO] Sending XML status message
[Status 09:53:31 INFO] Mirror angle: 0
[Mirror 09:53:31 INFO] rotating to position S
[Status 09:53:32 INFO] .SET file for ACQ96 ready
[Ingest 09:53:32 INFO] Starting acquisition
[Status 09:53:32 INFO] reading housekeeping
[Status 09:53:50 INFO] acquire complete
[Status 09:53:51 INFO] writing housekeeping
[Sequencer 09:53:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:53:51 INFO] incremented S scene to 182 completed views
[Sequencer 09:53:51 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:53:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:53:51 INFO] incremented to [AERI set: name T182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:53:51 INFO] S182.SIG(18)
[sigmove 09:53:51 DEBUG] transformed S182Ma.SPC -> S182MA.SPC
[sigmove 09:53:51 DEBUG] transformed S182Mb.SPC -> S182MB.SPC
[sigmove 09:53:51 DEBUG] transformed S182Mc.SPC -> S182MC.SPC
[sigmove 09:53:51 DEBUG] transformed S182Md.SPC -> S182MD.SPC
[sigmove 09:53:51 DEBUG] transformed S182Me.SPC -> S182ME.SPC
[sigmove 09:53:51 DEBUG] transformed S182Mf.SPC -> S182MF.SPC
[Status 09:53:51 INFO] data for S182 transferred to science data processing
[Tidy 09:53:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:53:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:53:51 INFO] resetting WatchDogTimer
[Status 09:53:51 INFO] Starting Set [AERI set: name T182, 6 scans, 0 angle, D16300 command]
[Ingest 09:53:51 INFO] Sending XML status message
[Status 09:53:51 INFO] Mirror angle: 0
[Mirror 09:53:51 INFO] rotating to position T
[Status 09:53:52 INFO] .SET file for ACQ96 ready
[Ingest 09:53:52 INFO] Starting acquisition
[Status 09:53:52 INFO] reading housekeeping
[Status 09:54:10 INFO] acquire complete
[Status 09:54:11 INFO] writing housekeeping
[Sequencer 09:54:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:54:11 INFO] incremented T scene to 182 completed views
[Sequencer 09:54:11 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:54:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:54:11 INFO] incremented to [AERI set: name U182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:54:11 INFO] T182.SIG(18)
[sigmove 09:54:11 DEBUG] transformed T182Ma.SPC -> T182MA.SPC
[sigmove 09:54:11 DEBUG] transformed T182Mb.SPC -> T182MB.SPC
[sigmove 09:54:11 DEBUG] transformed T182Mc.SPC -> T182MC.SPC
[sigmove 09:54:11 DEBUG] transformed T182Md.SPC -> T182MD.SPC
[sigmove 09:54:11 DEBUG] transformed T182Me.SPC -> T182ME.SPC
[sigmove 09:54:11 DEBUG] transformed T182Mf.SPC -> T182MF.SPC
[Status 09:54:11 INFO] data for T182 transferred to science data processing
[Tidy 09:54:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:54:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:54:11 INFO] resetting WatchDogTimer
[Status 09:54:11 INFO] Starting Set [AERI set: name U182, 6 scans, 0 angle, D16300 command]
[Ingest 09:54:11 INFO] Sending XML status message
[Status 09:54:11 INFO] Mirror angle: 0
[Mirror 09:54:12 INFO] rotating to position U
[Status 09:54:12 INFO] .SET file for ACQ96 ready
[Ingest 09:54:12 INFO] Starting acquisition
[Status 09:54:12 INFO] reading housekeeping
[Status 09:54:30 INFO] acquire complete
[Status 09:54:31 INFO] writing housekeeping
[Sequencer 09:54:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:54:31 INFO] incremented U scene to 182 completed views
[Sequencer 09:54:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:54:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:54:31 INFO] incremented to [AERI set: name V182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:54:31 INFO] U182.SIG(18)
[sigmove 09:54:31 DEBUG] transformed U182Ma.SPC -> U182MA.SPC
[sigmove 09:54:31 DEBUG] transformed U182Mb.SPC -> U182MB.SPC
[sigmove 09:54:31 DEBUG] transformed U182Mc.SPC -> U182MC.SPC
[sigmove 09:54:31 DEBUG] transformed U182Md.SPC -> U182MD.SPC
[sigmove 09:54:31 DEBUG] transformed U182Me.SPC -> U182ME.SPC
[sigmove 09:54:31 DEBUG] transformed U182Mf.SPC -> U182MF.SPC
[Status 09:54:31 INFO] data for U182 transferred to science data processing
[Tidy 09:54:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:54:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:54:31 INFO] resetting WatchDogTimer
[Status 09:54:31 INFO] Starting Set [AERI set: name V182, 6 scans, 0 angle, D16300 command]
[Ingest 09:54:31 INFO] Sending XML status message
[Status 09:54:31 INFO] Mirror angle: 0
[Mirror 09:54:32 INFO] rotating to position V
[Status 09:54:32 INFO] .SET file for ACQ96 ready
[Ingest 09:54:32 INFO] Starting acquisition
[Status 09:54:33 INFO] reading housekeeping
[Status 09:54:51 INFO] acquire complete
[Status 09:54:51 INFO] writing housekeeping
[Sequencer 09:54:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:54:51 INFO] incremented V scene to 182 completed views
[Sequencer 09:54:51 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:54:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:54:51 INFO] incremented to [AERI set: name W182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:54:51 INFO] V182.SIG(18)
[sigmove 09:54:51 DEBUG] transformed V182Ma.SPC -> V182MA.SPC
[sigmove 09:54:51 DEBUG] transformed V182Mb.SPC -> V182MB.SPC
[sigmove 09:54:51 DEBUG] transformed V182Mc.SPC -> V182MC.SPC
[sigmove 09:54:51 DEBUG] transformed V182Md.SPC -> V182MD.SPC
[sigmove 09:54:51 DEBUG] transformed V182Me.SPC -> V182ME.SPC
[sigmove 09:54:51 DEBUG] transformed V182Mf.SPC -> V182MF.SPC
[Status 09:54:51 INFO] data for V182 transferred to science data processing
[Tidy 09:54:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:54:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:54:51 INFO] resetting WatchDogTimer
[Status 09:54:52 INFO] Starting Set [AERI set: name W182, 6 scans, 0 angle, D16300 command]
[Ingest 09:54:52 INFO] Sending XML status message
[Status 09:54:52 INFO] Mirror angle: 0
[Mirror 09:54:52 INFO] rotating to position W
[Status 09:54:52 INFO] .SET file for ACQ96 ready
[Ingest 09:54:52 INFO] Starting acquisition
[Status 09:54:53 INFO] reading housekeeping
[Status 09:55:11 INFO] acquire complete
[Status 09:55:12 INFO] writing housekeeping
[Sequencer 09:55:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:55:12 INFO] incremented W scene to 182 completed views
[Sequencer 09:55:12 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:55:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:55:12 INFO] incremented to [AERI set: name X182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:55:12 INFO] W182.SIG(18)
[sigmove 09:55:12 DEBUG] transformed W182Ma.SPC -> W182MA.SPC
[sigmove 09:55:12 DEBUG] transformed W182Mb.SPC -> W182MB.SPC
[sigmove 09:55:12 DEBUG] transformed W182Mc.SPC -> W182MC.SPC
[sigmove 09:55:12 DEBUG] transformed W182Md.SPC -> W182MD.SPC
[sigmove 09:55:12 DEBUG] transformed W182Me.SPC -> W182ME.SPC
[sigmove 09:55:12 DEBUG] transformed W182Mf.SPC -> W182MF.SPC
[Status 09:55:12 INFO] data for W182 transferred to science data processing
[Tidy 09:55:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:55:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:55:12 INFO] resetting WatchDogTimer
[Status 09:55:12 INFO] Starting Set [AERI set: name X182, 6 scans, 0 angle, D16300 command]
[Ingest 09:55:12 INFO] Sending XML status message
[Status 09:55:12 INFO] Mirror angle: 0
[Mirror 09:55:12 INFO] rotating to position X
[Status 09:55:12 INFO] .SET file for ACQ96 ready
[Ingest 09:55:13 INFO] Starting acquisition
[Status 09:55:13 INFO] reading housekeeping
[Status 09:55:31 INFO] acquire complete
[Status 09:55:32 INFO] writing housekeeping
[Sequencer 09:55:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:55:32 INFO] incremented X scene to 182 completed views
[Sequencer 09:55:32 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:55:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:55:32 INFO] incremented to [AERI set: name Y182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:55:32 INFO] X182.SIG(18)
[sigmove 09:55:32 DEBUG] transformed X182Ma.SPC -> X182MA.SPC
[sigmove 09:55:32 DEBUG] transformed X182Mb.SPC -> X182MB.SPC
[sigmove 09:55:32 DEBUG] transformed X182Mc.SPC -> X182MC.SPC
[sigmove 09:55:32 DEBUG] transformed X182Md.SPC -> X182MD.SPC
[sigmove 09:55:32 DEBUG] transformed X182Me.SPC -> X182ME.SPC
[sigmove 09:55:32 DEBUG] transformed X182Mf.SPC -> X182MF.SPC
[Status 09:55:32 INFO] data for X182 transferred to science data processing
[Tidy 09:55:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:55:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:55:32 INFO] resetting WatchDogTimer
[Status 09:55:32 INFO] Starting Set [AERI set: name Y182, 6 scans, 0 angle, D16300 command]
[Ingest 09:55:32 INFO] Sending XML status message
[Status 09:55:32 INFO] Mirror angle: 0
[Mirror 09:55:32 INFO] rotating to position Y
[Status 09:55:33 INFO] .SET file for ACQ96 ready
[Ingest 09:55:33 INFO] Starting acquisition
[Status 09:55:33 INFO] reading housekeeping
[Status 09:55:51 INFO] acquire complete
[Status 09:55:52 INFO] writing housekeeping
[Sequencer 09:55:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:55:52 INFO] incremented Y scene to 182 completed views
[Sequencer 09:55:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:55:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:55:52 INFO] incremented to [AERI set: name Z182, 6 scans, 0 angle, D16300 command] set
[sigmove 09:55:52 INFO] Y182.SIG(18)
[sigmove 09:55:52 DEBUG] transformed Y182Ma.SPC -> Y182MA.SPC
[sigmove 09:55:52 DEBUG] transformed Y182Mb.SPC -> Y182MB.SPC
[sigmove 09:55:52 DEBUG] transformed Y182Mc.SPC -> Y182MC.SPC
[sigmove 09:55:52 DEBUG] transformed Y182Md.SPC -> Y182MD.SPC
[sigmove 09:55:52 DEBUG] transformed Y182Me.SPC -> Y182ME.SPC
[sigmove 09:55:52 DEBUG] transformed Y182Mf.SPC -> Y182MF.SPC
[Status 09:55:52 INFO] data for Y182 transferred to science data processing
[Tidy 09:55:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:55:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:55:52 INFO] resetting WatchDogTimer
[Status 09:55:52 INFO] Starting Set [AERI set: name Z182, 6 scans, 0 angle, D16300 command]
[Ingest 09:55:52 INFO] Sending XML status message
[Status 09:55:52 INFO] Mirror angle: 0
[Mirror 09:55:52 INFO] rotating to position Z
[Status 09:55:53 INFO] .SET file for ACQ96 ready
[Ingest 09:55:53 INFO] Starting acquisition
[Status 09:55:53 INFO] reading housekeeping
[Status 09:56:11 INFO] acquire complete
[Status 09:56:12 INFO] writing housekeeping
[Sequencer 09:56:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:56:12 INFO] incremented Z scene to 182 completed views
[Sequencer 09:56:12 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 09:56:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:56:12 INFO] incremented to [AERI set: name H183, 6 scans, 60 angle, D22500 command] set
[sigmove 09:56:12 INFO] Z182.SIG(18)
[sigmove 09:56:12 DEBUG] transformed Z182Ma.SPC -> Z182MA.SPC
[sigmove 09:56:12 DEBUG] transformed Z182Mb.SPC -> Z182MB.SPC
[sigmove 09:56:12 DEBUG] transformed Z182Mc.SPC -> Z182MC.SPC
[sigmove 09:56:12 DEBUG] transformed Z182Md.SPC -> Z182MD.SPC
[sigmove 09:56:12 DEBUG] transformed Z182Me.SPC -> Z182ME.SPC
[sigmove 09:56:12 DEBUG] transformed Z182Mf.SPC -> Z182MF.SPC
[Status 09:56:12 INFO] data for Z182 transferred to science data processing
[Tidy 09:56:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:56:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:56:12 INFO] resetting WatchDogTimer
[Status 09:56:12 INFO] Starting Set [AERI set: name H183, 6 scans, 60 angle, D22500 command]
[Ingest 09:56:12 INFO] Sending XML status message
[Status 09:56:12 INFO] Mirror angle: 60
[Mirror 09:56:13 INFO] rotating to position H
[Status 09:56:14 INFO] .SET file for ACQ96 ready
[Ingest 09:56:14 INFO] Starting acquisition
[Status 09:56:14 INFO] reading housekeeping
[Status 09:56:32 INFO] acquire complete
[Status 09:56:32 INFO] writing housekeeping
[Sequencer 09:56:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:56:32 INFO] incremented H scene to 183 completed views
[Sequencer 09:56:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:56:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:56:32 INFO] incremented to [AERI set: name A183, 6 scans, 120 angle, D28300 command] set
[sigmove 09:56:32 INFO] H183.SIG(18)
[sigmove 09:56:32 DEBUG] transformed H183Ma.SPC -> H183MA.SPC
[sigmove 09:56:32 DEBUG] transformed H183Mb.SPC -> H183MB.SPC
[sigmove 09:56:32 DEBUG] transformed H183Mc.SPC -> H183MC.SPC
[sigmove 09:56:32 DEBUG] transformed H183Md.SPC -> H183MD.SPC
[sigmove 09:56:32 DEBUG] transformed H183Me.SPC -> H183ME.SPC
[sigmove 09:56:32 DEBUG] transformed H183Mf.SPC -> H183MF.SPC
[Status 09:56:32 INFO] data for H183 transferred to science data processing
[Tidy 09:56:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:56:32 INFO] A181.FIN(19),H181.FIN(19),S181.FIN(19),T181.FIN(19),U181.FIN(19),V181.FIN(19),W181.FIN(19),X181.FIN(19),Y181.FIN(19),Z181.FIN(19),A182.FIN(19),H182.FIN(19),S182.FIN(19),T182.FIN(19),U182.FIN(19),V182.FIN(19),W182.FIN(19),X182.FIN(19),Y182.FIN(19),Z182.FIN(19)
[sigmove 09:56:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:56:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 09:56:36 DEBUG] done zipping
[WatchDog 09:56:36 INFO] resetting WatchDogTimer
[Status 09:56:36 INFO] Starting Set [AERI set: name A183, 6 scans, 120 angle, D28300 command]
[Ingest 09:56:36 INFO] Sending XML status message
[Status 09:56:36 INFO] Mirror angle: 120
[Mirror 09:56:36 INFO] rotating to position A
[Status 09:56:37 INFO] .SET file for ACQ96 ready
[Ingest 09:56:38 INFO] Starting acquisition
[Status 09:56:38 INFO] reading housekeeping
[Status 09:56:55 INFO] acquire complete
[Status 09:56:56 INFO] writing housekeeping
[Sequencer 09:56:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:56:56 INFO] incremented A scene to 183 completed views
[Sequencer 09:56:56 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 09:56:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:56:56 INFO] incremented to [AERI set: name S183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:56:56 INFO] A183.SIG(18)
[sigmove 09:56:56 DEBUG] transformed A183Ma.SPC -> A183MA.SPC
[sigmove 09:56:56 DEBUG] transformed A183Mb.SPC -> A183MB.SPC
[sigmove 09:56:56 DEBUG] transformed A183Mc.SPC -> A183MC.SPC
[sigmove 09:56:56 DEBUG] transformed A183Md.SPC -> A183MD.SPC
[sigmove 09:56:56 DEBUG] transformed A183Me.SPC -> A183ME.SPC
[sigmove 09:56:56 DEBUG] transformed A183Mf.SPC -> A183MF.SPC
[Status 09:56:56 INFO] data for A183 transferred to science data processing
[Tidy 09:56:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:56:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:56:56 INFO] resetting WatchDogTimer
[Status 09:56:56 INFO] Starting Set [AERI set: name S183, 6 scans, 0 angle, D16300 command]
[Ingest 09:56:56 INFO] Sending XML status message
[Status 09:56:56 INFO] Mirror angle: 0
[Mirror 09:56:56 INFO] rotating to position S
[Status 09:56:58 INFO] .SET file for ACQ96 ready
[Ingest 09:56:58 INFO] Starting acquisition
[Status 09:56:58 INFO] reading housekeeping
[Status 09:57:17 INFO] acquire complete
[Status 09:57:17 INFO] writing housekeeping
[Sequencer 09:57:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:57:17 INFO] incremented S scene to 183 completed views
[Sequencer 09:57:17 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:57:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:57:17 INFO] incremented to [AERI set: name T183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:57:17 INFO] S183.SIG(18)
[sigmove 09:57:17 DEBUG] transformed S183Ma.SPC -> S183MA.SPC
[sigmove 09:57:17 DEBUG] transformed S183Mb.SPC -> S183MB.SPC
[sigmove 09:57:17 DEBUG] transformed S183Mc.SPC -> S183MC.SPC
[sigmove 09:57:17 DEBUG] transformed S183Md.SPC -> S183MD.SPC
[sigmove 09:57:17 DEBUG] transformed S183Me.SPC -> S183ME.SPC
[sigmove 09:57:17 DEBUG] transformed S183Mf.SPC -> S183MF.SPC
[Status 09:57:17 INFO] data for S183 transferred to science data processing
[Tidy 09:57:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:57:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:57:17 INFO] resetting WatchDogTimer
[Status 09:57:18 INFO] Starting Set [AERI set: name T183, 6 scans, 0 angle, D16300 command]
[Ingest 09:57:18 INFO] Sending XML status message
[Status 09:57:18 INFO] Mirror angle: 0
[Mirror 09:57:18 INFO] rotating to position T
[Status 09:57:18 INFO] .SET file for ACQ96 ready
[Ingest 09:57:18 INFO] Starting acquisition
[Status 09:57:19 INFO] reading housekeeping
[Status 09:57:37 INFO] acquire complete
[Status 09:57:37 INFO] writing housekeeping
[Sequencer 09:57:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:57:37 INFO] incremented T scene to 183 completed views
[Sequencer 09:57:37 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:57:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:57:37 INFO] incremented to [AERI set: name U183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:57:37 INFO] T183.SIG(18)
[sigmove 09:57:37 DEBUG] transformed T183Ma.SPC -> T183MA.SPC
[sigmove 09:57:37 DEBUG] transformed T183Mb.SPC -> T183MB.SPC
[sigmove 09:57:37 DEBUG] transformed T183Mc.SPC -> T183MC.SPC
[sigmove 09:57:37 DEBUG] transformed T183Md.SPC -> T183MD.SPC
[sigmove 09:57:37 DEBUG] transformed T183Me.SPC -> T183ME.SPC
[sigmove 09:57:37 DEBUG] transformed T183Mf.SPC -> T183MF.SPC
[Status 09:57:37 INFO] data for T183 transferred to science data processing
[Tidy 09:57:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:57:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:57:37 INFO] resetting WatchDogTimer
[Status 09:57:38 INFO] Starting Set [AERI set: name U183, 6 scans, 0 angle, D16300 command]
[Ingest 09:57:38 INFO] Sending XML status message
[Status 09:57:38 INFO] Mirror angle: 0
[Mirror 09:57:38 INFO] rotating to position U
[Status 09:57:38 INFO] .SET file for ACQ96 ready
[Ingest 09:57:39 INFO] Starting acquisition
[Status 09:57:39 INFO] reading housekeeping
[Status 09:57:57 INFO] acquire complete
[Status 09:57:58 INFO] writing housekeeping
[Sequencer 09:57:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:57:58 INFO] incremented U scene to 183 completed views
[Sequencer 09:57:58 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:57:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:57:58 INFO] incremented to [AERI set: name V183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:57:58 INFO] U183.SIG(18)
[sigmove 09:57:58 DEBUG] transformed U183Ma.SPC -> U183MA.SPC
[sigmove 09:57:58 DEBUG] transformed U183Mb.SPC -> U183MB.SPC
[sigmove 09:57:58 DEBUG] transformed U183Mc.SPC -> U183MC.SPC
[sigmove 09:57:58 DEBUG] transformed U183Md.SPC -> U183MD.SPC
[sigmove 09:57:58 DEBUG] transformed U183Me.SPC -> U183ME.SPC
[sigmove 09:57:58 DEBUG] transformed U183Mf.SPC -> U183MF.SPC
[Status 09:57:58 INFO] data for U183 transferred to science data processing
[Tidy 09:57:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:57:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:57:58 INFO] resetting WatchDogTimer
[Status 09:57:58 INFO] Starting Set [AERI set: name V183, 6 scans, 0 angle, D16300 command]
[Ingest 09:57:58 INFO] Sending XML status message
[Status 09:57:58 INFO] Mirror angle: 0
[Mirror 09:57:58 INFO] rotating to position V
[Status 09:57:59 INFO] .SET file for ACQ96 ready
[Ingest 09:57:59 INFO] Starting acquisition
[Status 09:57:59 INFO] reading housekeeping
[Status 09:58:17 INFO] acquire complete
[Status 09:58:18 INFO] writing housekeeping
[Sequencer 09:58:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:58:18 INFO] incremented V scene to 183 completed views
[Sequencer 09:58:18 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:58:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:58:18 INFO] incremented to [AERI set: name W183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:58:18 INFO] V183.SIG(18)
[sigmove 09:58:18 DEBUG] transformed V183Ma.SPC -> V183MA.SPC
[sigmove 09:58:18 DEBUG] transformed V183Mb.SPC -> V183MB.SPC
[sigmove 09:58:18 DEBUG] transformed V183Mc.SPC -> V183MC.SPC
[sigmove 09:58:18 DEBUG] transformed V183Md.SPC -> V183MD.SPC
[sigmove 09:58:18 DEBUG] transformed V183Me.SPC -> V183ME.SPC
[sigmove 09:58:18 DEBUG] transformed V183Mf.SPC -> V183MF.SPC
[Status 09:58:18 INFO] data for V183 transferred to science data processing
[Tidy 09:58:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:58:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:58:18 INFO] resetting WatchDogTimer
[Status 09:58:18 INFO] Starting Set [AERI set: name W183, 6 scans, 0 angle, D16300 command]
[Ingest 09:58:18 INFO] Sending XML status message
[Status 09:58:18 INFO] Mirror angle: 0
[Mirror 09:58:18 INFO] rotating to position W
[Status 09:58:19 INFO] .SET file for ACQ96 ready
[Ingest 09:58:19 INFO] Starting acquisition
[Status 09:58:19 INFO] reading housekeeping
[Status 09:58:37 INFO] acquire complete
[Status 09:58:38 INFO] writing housekeeping
[Sequencer 09:58:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:58:38 INFO] incremented W scene to 183 completed views
[Sequencer 09:58:38 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:58:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:58:38 INFO] incremented to [AERI set: name X183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:58:38 INFO] W183.SIG(18)
[sigmove 09:58:38 DEBUG] transformed W183Ma.SPC -> W183MA.SPC
[sigmove 09:58:38 DEBUG] transformed W183Mb.SPC -> W183MB.SPC
[sigmove 09:58:38 DEBUG] transformed W183Mc.SPC -> W183MC.SPC
[sigmove 09:58:38 DEBUG] transformed W183Md.SPC -> W183MD.SPC
[sigmove 09:58:38 DEBUG] transformed W183Me.SPC -> W183ME.SPC
[sigmove 09:58:38 DEBUG] transformed W183Mf.SPC -> W183MF.SPC
[Status 09:58:38 INFO] data for W183 transferred to science data processing
[Tidy 09:58:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:58:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:58:38 INFO] resetting WatchDogTimer
[Status 09:58:38 INFO] Starting Set [AERI set: name X183, 6 scans, 0 angle, D16300 command]
[Ingest 09:58:38 INFO] Sending XML status message
[Status 09:58:38 INFO] Mirror angle: 0
[Mirror 09:58:39 INFO] rotating to position X
[Status 09:58:39 INFO] .SET file for ACQ96 ready
[Ingest 09:58:39 INFO] Starting acquisition
[Status 09:58:39 INFO] reading housekeeping
[Status 09:58:58 INFO] acquire complete
[Status 09:58:58 INFO] writing housekeeping
[Sequencer 09:58:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:58:58 INFO] incremented X scene to 183 completed views
[Sequencer 09:58:58 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:58:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:58:58 INFO] incremented to [AERI set: name Y183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:58:58 INFO] X183.SIG(18)
[sigmove 09:58:58 DEBUG] transformed X183Ma.SPC -> X183MA.SPC
[sigmove 09:58:58 DEBUG] transformed X183Mb.SPC -> X183MB.SPC
[sigmove 09:58:58 DEBUG] transformed X183Mc.SPC -> X183MC.SPC
[sigmove 09:58:58 DEBUG] transformed X183Md.SPC -> X183MD.SPC
[sigmove 09:58:58 DEBUG] transformed X183Me.SPC -> X183ME.SPC
[sigmove 09:58:58 DEBUG] transformed X183Mf.SPC -> X183MF.SPC
[Status 09:58:58 INFO] data for X183 transferred to science data processing
[Tidy 09:58:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:58:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:58:58 INFO] resetting WatchDogTimer
[Status 09:58:59 INFO] Starting Set [AERI set: name Y183, 6 scans, 0 angle, D16300 command]
[Ingest 09:58:59 INFO] Sending XML status message
[Status 09:58:59 INFO] Mirror angle: 0
[Mirror 09:58:59 INFO] rotating to position Y
[Status 09:58:59 INFO] .SET file for ACQ96 ready
[Ingest 09:58:59 INFO] Starting acquisition
[Status 09:59:00 INFO] reading housekeeping
[Status 09:59:18 INFO] acquire complete
[Status 09:59:18 INFO] writing housekeeping
[Sequencer 09:59:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:59:18 INFO] incremented Y scene to 183 completed views
[Sequencer 09:59:18 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 09:59:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:59:18 INFO] incremented to [AERI set: name Z183, 6 scans, 0 angle, D16300 command] set
[sigmove 09:59:18 INFO] Y183.SIG(18)
[sigmove 09:59:18 DEBUG] transformed Y183Ma.SPC -> Y183MA.SPC
[sigmove 09:59:18 DEBUG] transformed Y183Mb.SPC -> Y183MB.SPC
[sigmove 09:59:18 DEBUG] transformed Y183Mc.SPC -> Y183MC.SPC
[sigmove 09:59:18 DEBUG] transformed Y183Md.SPC -> Y183MD.SPC
[sigmove 09:59:18 DEBUG] transformed Y183Me.SPC -> Y183ME.SPC
[sigmove 09:59:18 DEBUG] transformed Y183Mf.SPC -> Y183MF.SPC
[Status 09:59:18 INFO] data for Y183 transferred to science data processing
[Tidy 09:59:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:59:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:59:18 INFO] resetting WatchDogTimer
[Status 09:59:19 INFO] Starting Set [AERI set: name Z183, 6 scans, 0 angle, D16300 command]
[Ingest 09:59:19 INFO] Sending XML status message
[Status 09:59:19 INFO] Mirror angle: 0
[Mirror 09:59:19 INFO] rotating to position Z
[Status 09:59:19 INFO] .SET file for ACQ96 ready
[Ingest 09:59:20 INFO] Starting acquisition
[Status 09:59:20 INFO] reading housekeeping
[Status 09:59:38 INFO] acquire complete
[Status 09:59:39 INFO] writing housekeeping
[Sequencer 09:59:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 09:59:39 INFO] incremented Z scene to 183 completed views
[Sequencer 09:59:39 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 09:59:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 09:59:39 INFO] incremented to [AERI set: name A184, 6 scans, 120 angle, D28300 command] set
[sigmove 09:59:39 INFO] Z183.SIG(18)
[sigmove 09:59:39 DEBUG] transformed Z183Ma.SPC -> Z183MA.SPC
[sigmove 09:59:39 DEBUG] transformed Z183Mb.SPC -> Z183MB.SPC
[sigmove 09:59:39 DEBUG] transformed Z183Mc.SPC -> Z183MC.SPC
[sigmove 09:59:39 DEBUG] transformed Z183Md.SPC -> Z183MD.SPC
[sigmove 09:59:39 DEBUG] transformed Z183Me.SPC -> Z183ME.SPC
[sigmove 09:59:39 DEBUG] transformed Z183Mf.SPC -> Z183MF.SPC
[Status 09:59:39 INFO] data for Z183 transferred to science data processing
[Tidy 09:59:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 09:59:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 09:59:39 INFO] resetting WatchDogTimer
[Status 09:59:39 INFO] Starting Set [AERI set: name A184, 6 scans, 120 angle, D28300 command]
[Ingest 09:59:39 INFO] Sending XML status message
[Status 09:59:39 INFO] Mirror angle: 120
[Mirror 09:59:39 INFO] rotating to position A
[Status 09:59:41 INFO] .SET file for ACQ96 ready
[Ingest 09:59:41 INFO] Starting acquisition
[Status 09:59:41 INFO] reading housekeeping
[Status 09:59:59 INFO] acquire complete
[Status 10:00:00 INFO] writing housekeeping
[Sequencer 10:00:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:00:00 INFO] incremented A scene to 184 completed views
[Sequencer 10:00:00 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:00:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:00:00 INFO] incremented to [AERI set: name H184, 6 scans, 60 angle, D22500 command] set
[sigmove 10:00:00 INFO] A184.SIG(18)
[sigmove 10:00:00 DEBUG] transformed A184Ma.SPC -> A184MA.SPC
[sigmove 10:00:00 DEBUG] transformed A184Mb.SPC -> A184MB.SPC
[sigmove 10:00:00 DEBUG] transformed A184Mc.SPC -> A184MC.SPC
[sigmove 10:00:00 DEBUG] transformed A184Md.SPC -> A184MD.SPC
[sigmove 10:00:00 DEBUG] transformed A184Me.SPC -> A184ME.SPC
[sigmove 10:00:00 DEBUG] transformed A184Mf.SPC -> A184MF.SPC
[Status 10:00:00 INFO] data for A184 transferred to science data processing
[Tidy 10:00:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:00:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:00:00 INFO] resetting WatchDogTimer
[Status 10:00:00 INFO] Starting Set [AERI set: name H184, 6 scans, 60 angle, D22500 command]
[Ingest 10:00:00 INFO] Sending XML status message
[Status 10:00:00 INFO] Mirror angle: 60
[Mirror 10:00:00 INFO] rotating to position H
[Status 10:00:01 INFO] .SET file for ACQ96 ready
[Ingest 10:00:02 INFO] Starting acquisition
[Status 10:00:02 INFO] reading housekeeping
[Status 10:00:19 INFO] acquire complete
[Status 10:00:20 INFO] writing housekeeping
[Sequencer 10:00:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:00:20 INFO] incremented H scene to 184 completed views
[Sequencer 10:00:20 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:00:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:00:20 INFO] incremented to [AERI set: name S184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:00:20 INFO] H184.SIG(18)
[sigmove 10:00:20 DEBUG] transformed H184Ma.SPC -> H184MA.SPC
[sigmove 10:00:20 DEBUG] transformed H184Mb.SPC -> H184MB.SPC
[sigmove 10:00:20 DEBUG] transformed H184Mc.SPC -> H184MC.SPC
[sigmove 10:00:20 DEBUG] transformed H184Md.SPC -> H184MD.SPC
[sigmove 10:00:20 DEBUG] transformed H184Me.SPC -> H184ME.SPC
[sigmove 10:00:20 DEBUG] transformed H184Mf.SPC -> H184MF.SPC
[Status 10:00:20 INFO] data for H184 transferred to science data processing
[Tidy 10:00:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:00:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:00:20 INFO] resetting WatchDogTimer
[Status 10:00:20 INFO] Starting Set [AERI set: name S184, 6 scans, 0 angle, D16300 command]
[Ingest 10:00:20 INFO] Sending XML status message
[Status 10:00:20 INFO] Mirror angle: 0
[Mirror 10:00:21 INFO] rotating to position S
[Status 10:00:22 INFO] .SET file for ACQ96 ready
[Ingest 10:00:22 INFO] Starting acquisition
[Status 10:00:22 INFO] reading housekeeping
[Status 10:00:40 INFO] acquire complete
[Status 10:00:41 INFO] writing housekeeping
[Sequencer 10:00:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:00:41 INFO] incremented S scene to 184 completed views
[Sequencer 10:00:41 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:00:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:00:41 INFO] incremented to [AERI set: name T184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:00:41 INFO] S184.SIG(18)
[sigmove 10:00:41 DEBUG] transformed S184Ma.SPC -> S184MA.SPC
[sigmove 10:00:41 DEBUG] transformed S184Mb.SPC -> S184MB.SPC
[sigmove 10:00:41 DEBUG] transformed S184Mc.SPC -> S184MC.SPC
[sigmove 10:00:41 DEBUG] transformed S184Md.SPC -> S184MD.SPC
[sigmove 10:00:41 DEBUG] transformed S184Me.SPC -> S184ME.SPC
[sigmove 10:00:41 DEBUG] transformed S184Mf.SPC -> S184MF.SPC
[Status 10:00:41 INFO] data for S184 transferred to science data processing
[Tidy 10:00:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:00:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:00:41 INFO] resetting WatchDogTimer
[Status 10:00:41 INFO] Starting Set [AERI set: name T184, 6 scans, 0 angle, D16300 command]
[Ingest 10:00:41 INFO] Sending XML status message
[Status 10:00:41 INFO] Mirror angle: 0
[Mirror 10:00:41 INFO] rotating to position T
[Status 10:00:41 INFO] .SET file for ACQ96 ready
[Ingest 10:00:42 INFO] Starting acquisition
[Status 10:00:42 INFO] reading housekeeping
[Status 10:01:00 INFO] acquire complete
[Status 10:01:01 INFO] writing housekeeping
[Sequencer 10:01:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:01:01 INFO] incremented T scene to 184 completed views
[Sequencer 10:01:01 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:01:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:01:01 INFO] incremented to [AERI set: name U184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:01:01 INFO] T184.SIG(18)
[sigmove 10:01:01 DEBUG] transformed T184Ma.SPC -> T184MA.SPC
[sigmove 10:01:01 DEBUG] transformed T184Mb.SPC -> T184MB.SPC
[sigmove 10:01:01 DEBUG] transformed T184Mc.SPC -> T184MC.SPC
[sigmove 10:01:01 DEBUG] transformed T184Md.SPC -> T184MD.SPC
[sigmove 10:01:01 DEBUG] transformed T184Me.SPC -> T184ME.SPC
[sigmove 10:01:01 DEBUG] transformed T184Mf.SPC -> T184MF.SPC
[Status 10:01:01 INFO] data for T184 transferred to science data processing
[Tidy 10:01:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:01:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:01:01 INFO] resetting WatchDogTimer
[Status 10:01:01 INFO] Starting Set [AERI set: name U184, 6 scans, 0 angle, D16300 command]
[Ingest 10:01:01 INFO] Sending XML status message
[Status 10:01:01 INFO] Mirror angle: 0
[Mirror 10:01:01 INFO] rotating to position U
[Status 10:01:01 INFO] .SET file for ACQ96 ready
[Ingest 10:01:02 INFO] Starting acquisition
[Status 10:01:02 INFO] reading housekeeping
[Status 10:01:20 INFO] acquire complete
[Status 10:01:21 INFO] writing housekeeping
[Sequencer 10:01:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:01:21 INFO] incremented U scene to 184 completed views
[Sequencer 10:01:21 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:01:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:01:21 INFO] incremented to [AERI set: name V184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:01:21 INFO] U184.SIG(18)
[sigmove 10:01:21 DEBUG] transformed U184Ma.SPC -> U184MA.SPC
[sigmove 10:01:21 DEBUG] transformed U184Mb.SPC -> U184MB.SPC
[sigmove 10:01:21 DEBUG] transformed U184Mc.SPC -> U184MC.SPC
[sigmove 10:01:21 DEBUG] transformed U184Md.SPC -> U184MD.SPC
[sigmove 10:01:21 DEBUG] transformed U184Me.SPC -> U184ME.SPC
[sigmove 10:01:21 DEBUG] transformed U184Mf.SPC -> U184MF.SPC
[Status 10:01:21 INFO] data for U184 transferred to science data processing
[Tidy 10:01:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:01:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:01:21 INFO] resetting WatchDogTimer
[Status 10:01:21 INFO] Starting Set [AERI set: name V184, 6 scans, 0 angle, D16300 command]
[Ingest 10:01:21 INFO] Sending XML status message
[Status 10:01:21 INFO] Mirror angle: 0
[Mirror 10:01:21 INFO] rotating to position V
[Status 10:01:22 INFO] .SET file for ACQ96 ready
[Ingest 10:01:22 INFO] Starting acquisition
[Status 10:01:22 INFO] reading housekeeping
[Status 10:01:40 INFO] acquire complete
[Status 10:01:41 INFO] writing housekeeping
[Sequencer 10:01:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:01:41 INFO] incremented V scene to 184 completed views
[Sequencer 10:01:41 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:01:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:01:41 INFO] incremented to [AERI set: name W184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:01:41 INFO] V184.SIG(18)
[sigmove 10:01:41 DEBUG] transformed V184Ma.SPC -> V184MA.SPC
[sigmove 10:01:41 DEBUG] transformed V184Mb.SPC -> V184MB.SPC
[sigmove 10:01:41 DEBUG] transformed V184Mc.SPC -> V184MC.SPC
[sigmove 10:01:41 DEBUG] transformed V184Md.SPC -> V184MD.SPC
[sigmove 10:01:41 DEBUG] transformed V184Me.SPC -> V184ME.SPC
[sigmove 10:01:41 DEBUG] transformed V184Mf.SPC -> V184MF.SPC
[Status 10:01:41 INFO] data for V184 transferred to science data processing
[Tidy 10:01:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:01:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:01:41 INFO] resetting WatchDogTimer
[Status 10:01:41 INFO] Starting Set [AERI set: name W184, 6 scans, 0 angle, D16300 command]
[Ingest 10:01:41 INFO] Sending XML status message
[Status 10:01:41 INFO] Mirror angle: 0
[Mirror 10:01:41 INFO] rotating to position W
[Status 10:01:42 INFO] .SET file for ACQ96 ready
[Ingest 10:01:42 INFO] Starting acquisition
[Status 10:01:42 INFO] reading housekeeping
[Status 10:02:00 INFO] acquire complete
[Status 10:02:01 INFO] writing housekeeping
[Sequencer 10:02:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:02:01 INFO] incremented W scene to 184 completed views
[Sequencer 10:02:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:02:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:02:01 INFO] incremented to [AERI set: name X184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:02:01 INFO] W184.SIG(18)
[sigmove 10:02:01 DEBUG] transformed W184Ma.SPC -> W184MA.SPC
[sigmove 10:02:01 DEBUG] transformed W184Mb.SPC -> W184MB.SPC
[sigmove 10:02:01 DEBUG] transformed W184Mc.SPC -> W184MC.SPC
[sigmove 10:02:01 DEBUG] transformed W184Md.SPC -> W184MD.SPC
[sigmove 10:02:01 DEBUG] transformed W184Me.SPC -> W184ME.SPC
[sigmove 10:02:01 DEBUG] transformed W184Mf.SPC -> W184MF.SPC
[Status 10:02:01 INFO] data for W184 transferred to science data processing
[Tidy 10:02:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:02:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:02:01 INFO] resetting WatchDogTimer
[Status 10:02:01 INFO] Starting Set [AERI set: name X184, 6 scans, 0 angle, D16300 command]
[Ingest 10:02:01 INFO] Sending XML status message
[Status 10:02:01 INFO] Mirror angle: 0
[Mirror 10:02:02 INFO] rotating to position X
[Status 10:02:02 INFO] .SET file for ACQ96 ready
[Ingest 10:02:02 INFO] Starting acquisition
[Status 10:02:02 INFO] reading housekeeping
[Status 10:02:21 INFO] acquire complete
[Status 10:02:21 INFO] writing housekeeping
[Sequencer 10:02:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:02:21 INFO] incremented X scene to 184 completed views
[Sequencer 10:02:21 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:02:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:02:21 INFO] incremented to [AERI set: name Y184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:02:21 INFO] X184.SIG(18)
[sigmove 10:02:21 DEBUG] transformed X184Ma.SPC -> X184MA.SPC
[sigmove 10:02:21 DEBUG] transformed X184Mb.SPC -> X184MB.SPC
[sigmove 10:02:21 DEBUG] transformed X184Mc.SPC -> X184MC.SPC
[sigmove 10:02:21 DEBUG] transformed X184Md.SPC -> X184MD.SPC
[sigmove 10:02:21 DEBUG] transformed X184Me.SPC -> X184ME.SPC
[sigmove 10:02:21 DEBUG] transformed X184Mf.SPC -> X184MF.SPC
[Status 10:02:21 INFO] data for X184 transferred to science data processing
[Tidy 10:02:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:02:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:02:21 INFO] resetting WatchDogTimer
[Status 10:02:22 INFO] Starting Set [AERI set: name Y184, 6 scans, 0 angle, D16300 command]
[Ingest 10:02:22 INFO] Sending XML status message
[Status 10:02:22 INFO] Mirror angle: 0
[Mirror 10:02:22 INFO] rotating to position Y
[Status 10:02:22 INFO] .SET file for ACQ96 ready
[Ingest 10:02:22 INFO] Starting acquisition
[Status 10:02:23 INFO] reading housekeeping
[Status 10:02:41 INFO] acquire complete
[Status 10:02:41 INFO] writing housekeeping
[Sequencer 10:02:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:02:41 INFO] incremented Y scene to 184 completed views
[Sequencer 10:02:41 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:02:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:02:41 INFO] incremented to [AERI set: name Z184, 6 scans, 0 angle, D16300 command] set
[sigmove 10:02:41 INFO] Y184.SIG(18)
[sigmove 10:02:41 DEBUG] transformed Y184Ma.SPC -> Y184MA.SPC
[sigmove 10:02:41 DEBUG] transformed Y184Mb.SPC -> Y184MB.SPC
[sigmove 10:02:41 DEBUG] transformed Y184Mc.SPC -> Y184MC.SPC
[sigmove 10:02:41 DEBUG] transformed Y184Md.SPC -> Y184MD.SPC
[sigmove 10:02:41 DEBUG] transformed Y184Me.SPC -> Y184ME.SPC
[sigmove 10:02:42 DEBUG] transformed Y184Mf.SPC -> Y184MF.SPC
[Status 10:02:42 INFO] data for Y184 transferred to science data processing
[Tidy 10:02:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:02:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:02:42 INFO] resetting WatchDogTimer
[Status 10:02:42 INFO] Starting Set [AERI set: name Z184, 6 scans, 0 angle, D16300 command]
[Ingest 10:02:42 INFO] Sending XML status message
[Status 10:02:42 INFO] Mirror angle: 0
[Mirror 10:02:42 INFO] rotating to position Z
[Status 10:02:42 INFO] .SET file for ACQ96 ready
[Ingest 10:02:43 INFO] Starting acquisition
[Status 10:02:43 INFO] reading housekeeping
[Status 10:03:01 INFO] acquire complete
[Status 10:03:02 INFO] writing housekeeping
[Sequencer 10:03:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:03:02 INFO] incremented Z scene to 184 completed views
[Sequencer 10:03:02 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:03:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:03:02 INFO] incremented to [AERI set: name H185, 6 scans, 60 angle, D22500 command] set
[sigmove 10:03:02 INFO] Z184.SIG(18)
[sigmove 10:03:02 DEBUG] transformed Z184Ma.SPC -> Z184MA.SPC
[sigmove 10:03:02 DEBUG] transformed Z184Mb.SPC -> Z184MB.SPC
[sigmove 10:03:02 DEBUG] transformed Z184Mc.SPC -> Z184MC.SPC
[sigmove 10:03:02 DEBUG] transformed Z184Md.SPC -> Z184MD.SPC
[sigmove 10:03:02 DEBUG] transformed Z184Me.SPC -> Z184ME.SPC
[sigmove 10:03:02 DEBUG] transformed Z184Mf.SPC -> Z184MF.SPC
[Status 10:03:02 INFO] data for Z184 transferred to science data processing
[Tidy 10:03:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:03:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:03:02 INFO] resetting WatchDogTimer
[Status 10:03:02 INFO] Starting Set [AERI set: name H185, 6 scans, 60 angle, D22500 command]
[Ingest 10:03:02 INFO] Sending XML status message
[Status 10:03:02 INFO] Mirror angle: 60
[Mirror 10:03:03 INFO] rotating to position H
[Status 10:03:04 INFO] .SET file for ACQ96 ready
[Ingest 10:03:04 INFO] Starting acquisition
[Status 10:03:04 INFO] reading housekeeping
[Status 10:03:22 INFO] acquire complete
[Status 10:03:23 INFO] writing housekeeping
[Sequencer 10:03:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:03:23 INFO] incremented H scene to 185 completed views
[Sequencer 10:03:23 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:03:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:03:23 INFO] incremented to [AERI set: name A185, 6 scans, 120 angle, D28300 command] set
[sigmove 10:03:23 INFO] H185.SIG(18)
[sigmove 10:03:23 DEBUG] transformed H185Ma.SPC -> H185MA.SPC
[sigmove 10:03:23 DEBUG] transformed H185Mb.SPC -> H185MB.SPC
[sigmove 10:03:23 DEBUG] transformed H185Mc.SPC -> H185MC.SPC
[sigmove 10:03:23 DEBUG] transformed H185Md.SPC -> H185MD.SPC
[sigmove 10:03:23 DEBUG] transformed H185Me.SPC -> H185ME.SPC
[sigmove 10:03:23 DEBUG] transformed H185Mf.SPC -> H185MF.SPC
[Status 10:03:23 INFO] data for H185 transferred to science data processing
[Tidy 10:03:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:03:23 INFO] A183.FIN(19),H183.FIN(19),S183.FIN(19),T183.FIN(19),U183.FIN(19),V183.FIN(19),W183.FIN(19),X183.FIN(19),Y183.FIN(19),Z183.FIN(19),A184.FIN(19),H184.FIN(19),S184.FIN(19),T184.FIN(19),U184.FIN(19),V184.FIN(19),W184.FIN(19),X184.FIN(19),Y184.FIN(19),Z184.FIN(19)
[sigmove 10:03:23 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:03:23 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:03:26 DEBUG] done zipping
[WatchDog 10:03:27 INFO] resetting WatchDogTimer
[Status 10:03:27 INFO] Starting Set [AERI set: name A185, 6 scans, 120 angle, D28300 command]
[Ingest 10:03:27 INFO] Sending XML status message
[Status 10:03:27 INFO] Mirror angle: 120
[Mirror 10:03:27 INFO] rotating to position A
[Status 10:03:28 INFO] .SET file for ACQ96 ready
[Ingest 10:03:28 INFO] Starting acquisition
[Status 10:03:29 INFO] reading housekeeping
[Status 10:03:47 INFO] acquire complete
[Status 10:03:48 INFO] writing housekeeping
[Sequencer 10:03:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:03:48 INFO] incremented A scene to 185 completed views
[Sequencer 10:03:48 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:03:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:03:48 INFO] incremented to [AERI set: name S185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:03:48 INFO] A185.SIG(18)
[sigmove 10:03:48 DEBUG] transformed A185Ma.SPC -> A185MA.SPC
[sigmove 10:03:48 DEBUG] transformed A185Mb.SPC -> A185MB.SPC
[sigmove 10:03:48 DEBUG] transformed A185Mc.SPC -> A185MC.SPC
[sigmove 10:03:48 DEBUG] transformed A185Md.SPC -> A185MD.SPC
[sigmove 10:03:48 DEBUG] transformed A185Me.SPC -> A185ME.SPC
[sigmove 10:03:48 DEBUG] transformed A185Mf.SPC -> A185MF.SPC
[Status 10:03:48 INFO] data for A185 transferred to science data processing
[Tidy 10:03:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:03:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:03:48 INFO] resetting WatchDogTimer
[Status 10:03:48 INFO] Starting Set [AERI set: name S185, 6 scans, 0 angle, D16300 command]
[Ingest 10:03:48 INFO] Sending XML status message
[Status 10:03:48 INFO] Mirror angle: 0
[Mirror 10:03:48 INFO] rotating to position S
[Status 10:03:50 INFO] .SET file for ACQ96 ready
[Ingest 10:03:50 INFO] Starting acquisition
[Status 10:03:50 INFO] reading housekeeping
[Status 10:04:08 INFO] acquire complete
[Status 10:04:09 INFO] writing housekeeping
[Sequencer 10:04:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:04:09 INFO] incremented S scene to 185 completed views
[Sequencer 10:04:09 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:04:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:04:09 INFO] incremented to [AERI set: name T185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:04:09 INFO] S185.SIG(18)
[sigmove 10:04:09 DEBUG] transformed S185Ma.SPC -> S185MA.SPC
[sigmove 10:04:09 DEBUG] transformed S185Mb.SPC -> S185MB.SPC
[sigmove 10:04:09 DEBUG] transformed S185Mc.SPC -> S185MC.SPC
[sigmove 10:04:09 DEBUG] transformed S185Md.SPC -> S185MD.SPC
[sigmove 10:04:09 DEBUG] transformed S185Me.SPC -> S185ME.SPC
[sigmove 10:04:09 DEBUG] transformed S185Mf.SPC -> S185MF.SPC
[Status 10:04:09 INFO] data for S185 transferred to science data processing
[Tidy 10:04:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:04:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:04:09 INFO] resetting WatchDogTimer
[Status 10:04:10 INFO] Starting Set [AERI set: name T185, 6 scans, 0 angle, D16300 command]
[Ingest 10:04:10 INFO] Sending XML status message
[Status 10:04:10 INFO] Mirror angle: 0
[Mirror 10:04:10 INFO] rotating to position T
[Status 10:04:10 INFO] .SET file for ACQ96 ready
[Ingest 10:04:10 INFO] Starting acquisition
[Status 10:04:11 INFO] reading housekeeping
[Status 10:04:29 INFO] acquire complete
[Status 10:04:30 INFO] writing housekeeping
[Sequencer 10:04:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:04:30 INFO] incremented T scene to 185 completed views
[Sequencer 10:04:30 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:04:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:04:30 INFO] incremented to [AERI set: name U185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:04:30 INFO] T185.SIG(18)
[sigmove 10:04:30 DEBUG] transformed T185Ma.SPC -> T185MA.SPC
[sigmove 10:04:30 DEBUG] transformed T185Mb.SPC -> T185MB.SPC
[sigmove 10:04:30 DEBUG] transformed T185Mc.SPC -> T185MC.SPC
[sigmove 10:04:30 DEBUG] transformed T185Md.SPC -> T185MD.SPC
[sigmove 10:04:30 DEBUG] transformed T185Me.SPC -> T185ME.SPC
[sigmove 10:04:30 DEBUG] transformed T185Mf.SPC -> T185MF.SPC
[Status 10:04:30 INFO] data for T185 transferred to science data processing
[Tidy 10:04:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:04:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:04:30 INFO] resetting WatchDogTimer
[Status 10:04:30 INFO] Starting Set [AERI set: name U185, 6 scans, 0 angle, D16300 command]
[Ingest 10:04:30 INFO] Sending XML status message
[Status 10:04:30 INFO] Mirror angle: 0
[Mirror 10:04:30 INFO] rotating to position U
[Status 10:04:30 INFO] .SET file for ACQ96 ready
[Ingest 10:04:31 INFO] Starting acquisition
[Status 10:04:31 INFO] reading housekeeping
[Status 10:04:49 INFO] acquire complete
[Status 10:04:49 INFO] writing housekeeping
[Sequencer 10:04:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:04:49 INFO] incremented U scene to 185 completed views
[Sequencer 10:04:49 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:04:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:04:49 INFO] incremented to [AERI set: name V185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:04:49 INFO] U185.SIG(18)
[sigmove 10:04:49 DEBUG] transformed U185Ma.SPC -> U185MA.SPC
[sigmove 10:04:49 DEBUG] transformed U185Mb.SPC -> U185MB.SPC
[sigmove 10:04:49 DEBUG] transformed U185Mc.SPC -> U185MC.SPC
[sigmove 10:04:49 DEBUG] transformed U185Md.SPC -> U185MD.SPC
[sigmove 10:04:49 DEBUG] transformed U185Me.SPC -> U185ME.SPC
[sigmove 10:04:49 DEBUG] transformed U185Mf.SPC -> U185MF.SPC
[Status 10:04:49 INFO] data for U185 transferred to science data processing
[Tidy 10:04:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:04:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:04:49 INFO] resetting WatchDogTimer
[Status 10:04:50 INFO] Starting Set [AERI set: name V185, 6 scans, 0 angle, D16300 command]
[Ingest 10:04:50 INFO] Sending XML status message
[Status 10:04:50 INFO] Mirror angle: 0
[Mirror 10:04:50 INFO] rotating to position V
[Status 10:04:50 INFO] .SET file for ACQ96 ready
[Ingest 10:04:51 INFO] Starting acquisition
[Status 10:04:51 INFO] reading housekeeping
[Status 10:05:09 INFO] acquire complete
[Status 10:05:10 INFO] writing housekeeping
[Sequencer 10:05:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:05:10 INFO] incremented V scene to 185 completed views
[Sequencer 10:05:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:05:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:05:10 INFO] incremented to [AERI set: name W185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:05:10 INFO] V185.SIG(18)
[sigmove 10:05:10 DEBUG] transformed V185Ma.SPC -> V185MA.SPC
[sigmove 10:05:10 DEBUG] transformed V185Mb.SPC -> V185MB.SPC
[sigmove 10:05:10 DEBUG] transformed V185Mc.SPC -> V185MC.SPC
[sigmove 10:05:10 DEBUG] transformed V185Md.SPC -> V185MD.SPC
[sigmove 10:05:10 DEBUG] transformed V185Me.SPC -> V185ME.SPC
[sigmove 10:05:10 DEBUG] transformed V185Mf.SPC -> V185MF.SPC
[Status 10:05:10 INFO] data for V185 transferred to science data processing
[Tidy 10:05:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:05:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:05:10 INFO] resetting WatchDogTimer
[Status 10:05:10 INFO] Starting Set [AERI set: name W185, 6 scans, 0 angle, D16300 command]
[Ingest 10:05:10 INFO] Sending XML status message
[Status 10:05:10 INFO] Mirror angle: 0
[Mirror 10:05:10 INFO] rotating to position W
[Status 10:05:10 INFO] .SET file for ACQ96 ready
[Ingest 10:05:11 INFO] Starting acquisition
[Status 10:05:11 INFO] reading housekeeping
[Status 10:05:29 INFO] acquire complete
[Status 10:05:30 INFO] writing housekeeping
[Sequencer 10:05:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:05:30 INFO] incremented W scene to 185 completed views
[Sequencer 10:05:30 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:05:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:05:30 INFO] incremented to [AERI set: name X185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:05:30 INFO] W185.SIG(18)
[sigmove 10:05:30 DEBUG] transformed W185Ma.SPC -> W185MA.SPC
[sigmove 10:05:30 DEBUG] transformed W185Mb.SPC -> W185MB.SPC
[sigmove 10:05:30 DEBUG] transformed W185Mc.SPC -> W185MC.SPC
[sigmove 10:05:30 DEBUG] transformed W185Md.SPC -> W185MD.SPC
[sigmove 10:05:30 DEBUG] transformed W185Me.SPC -> W185ME.SPC
[sigmove 10:05:30 DEBUG] transformed W185Mf.SPC -> W185MF.SPC
[Status 10:05:30 INFO] data for W185 transferred to science data processing
[Tidy 10:05:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:05:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:05:30 INFO] resetting WatchDogTimer
[Status 10:05:30 INFO] Starting Set [AERI set: name X185, 6 scans, 0 angle, D16300 command]
[Ingest 10:05:30 INFO] Sending XML status message
[Status 10:05:30 INFO] Mirror angle: 0
[Mirror 10:05:30 INFO] rotating to position X
[Status 10:05:31 INFO] .SET file for ACQ96 ready
[Ingest 10:05:31 INFO] Starting acquisition
[Status 10:05:31 INFO] reading housekeeping
[Status 10:05:49 INFO] acquire complete
[Status 10:05:50 INFO] writing housekeeping
[Sequencer 10:05:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:05:50 INFO] incremented X scene to 185 completed views
[Sequencer 10:05:50 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:05:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:05:50 INFO] incremented to [AERI set: name Y185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:05:50 INFO] X185.SIG(18)
[sigmove 10:05:50 DEBUG] transformed X185Ma.SPC -> X185MA.SPC
[sigmove 10:05:50 DEBUG] transformed X185Mb.SPC -> X185MB.SPC
[sigmove 10:05:50 DEBUG] transformed X185Mc.SPC -> X185MC.SPC
[sigmove 10:05:50 DEBUG] transformed X185Md.SPC -> X185MD.SPC
[sigmove 10:05:50 DEBUG] transformed X185Me.SPC -> X185ME.SPC
[sigmove 10:05:50 DEBUG] transformed X185Mf.SPC -> X185MF.SPC
[Status 10:05:50 INFO] data for X185 transferred to science data processing
[Tidy 10:05:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:05:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:05:50 INFO] resetting WatchDogTimer
[Status 10:05:50 INFO] Starting Set [AERI set: name Y185, 6 scans, 0 angle, D16300 command]
[Ingest 10:05:50 INFO] Sending XML status message
[Status 10:05:50 INFO] Mirror angle: 0
[Mirror 10:05:51 INFO] rotating to position Y
[Status 10:05:51 INFO] .SET file for ACQ96 ready
[Ingest 10:05:51 INFO] Starting acquisition
[Status 10:05:51 INFO] reading housekeeping
[Status 10:06:09 INFO] acquire complete
[Status 10:06:10 INFO] writing housekeeping
[Sequencer 10:06:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:06:10 INFO] incremented Y scene to 185 completed views
[Sequencer 10:06:10 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:06:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:06:10 INFO] incremented to [AERI set: name Z185, 6 scans, 0 angle, D16300 command] set
[sigmove 10:06:10 INFO] Y185.SIG(18)
[sigmove 10:06:10 DEBUG] transformed Y185Ma.SPC -> Y185MA.SPC
[sigmove 10:06:10 DEBUG] transformed Y185Mb.SPC -> Y185MB.SPC
[sigmove 10:06:10 DEBUG] transformed Y185Mc.SPC -> Y185MC.SPC
[sigmove 10:06:10 DEBUG] transformed Y185Md.SPC -> Y185MD.SPC
[sigmove 10:06:10 DEBUG] transformed Y185Me.SPC -> Y185ME.SPC
[sigmove 10:06:10 DEBUG] transformed Y185Mf.SPC -> Y185MF.SPC
[Status 10:06:10 INFO] data for Y185 transferred to science data processing
[Tidy 10:06:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:06:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:06:10 INFO] resetting WatchDogTimer
[Status 10:06:10 INFO] Starting Set [AERI set: name Z185, 6 scans, 0 angle, D16300 command]
[Ingest 10:06:10 INFO] Sending XML status message
[Status 10:06:10 INFO] Mirror angle: 0
[Mirror 10:06:11 INFO] rotating to position Z
[Status 10:06:11 INFO] .SET file for ACQ96 ready
[Ingest 10:06:11 INFO] Starting acquisition
[Status 10:06:12 INFO] reading housekeeping
[Status 10:06:30 INFO] acquire complete
[Status 10:06:30 INFO] writing housekeeping
[Sequencer 10:06:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:06:30 INFO] incremented Z scene to 185 completed views
[Sequencer 10:06:30 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:06:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:06:30 INFO] incremented to [AERI set: name A186, 6 scans, 120 angle, D28300 command] set
[sigmove 10:06:30 INFO] Z185.SIG(18)
[sigmove 10:06:30 DEBUG] transformed Z185Ma.SPC -> Z185MA.SPC
[sigmove 10:06:30 DEBUG] transformed Z185Mb.SPC -> Z185MB.SPC
[sigmove 10:06:30 DEBUG] transformed Z185Mc.SPC -> Z185MC.SPC
[sigmove 10:06:30 DEBUG] transformed Z185Md.SPC -> Z185MD.SPC
[sigmove 10:06:30 DEBUG] transformed Z185Me.SPC -> Z185ME.SPC
[sigmove 10:06:30 DEBUG] transformed Z185Mf.SPC -> Z185MF.SPC
[Status 10:06:30 INFO] data for Z185 transferred to science data processing
[Tidy 10:06:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:06:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:06:30 INFO] resetting WatchDogTimer
[Status 10:06:31 INFO] Starting Set [AERI set: name A186, 6 scans, 120 angle, D28300 command]
[Ingest 10:06:31 INFO] Sending XML status message
[Status 10:06:31 INFO] Mirror angle: 120
[Mirror 10:06:31 INFO] rotating to position A
[Status 10:06:32 INFO] .SET file for ACQ96 ready
[Ingest 10:06:33 INFO] Starting acquisition
[Status 10:06:33 INFO] reading housekeeping
[Status 10:06:51 INFO] acquire complete
[Status 10:06:52 INFO] writing housekeeping
[Sequencer 10:06:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:06:52 INFO] incremented A scene to 186 completed views
[Sequencer 10:06:52 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:06:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:06:52 INFO] incremented to [AERI set: name H186, 6 scans, 60 angle, D22500 command] set
[sigmove 10:06:52 INFO] A186.SIG(18)
[sigmove 10:06:52 DEBUG] transformed A186Ma.SPC -> A186MA.SPC
[sigmove 10:06:52 DEBUG] transformed A186Mb.SPC -> A186MB.SPC
[sigmove 10:06:52 DEBUG] transformed A186Mc.SPC -> A186MC.SPC
[sigmove 10:06:52 DEBUG] transformed A186Md.SPC -> A186MD.SPC
[sigmove 10:06:52 DEBUG] transformed A186Me.SPC -> A186ME.SPC
[sigmove 10:06:52 DEBUG] transformed A186Mf.SPC -> A186MF.SPC
[Status 10:06:52 INFO] data for A186 transferred to science data processing
[Tidy 10:06:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:06:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:06:52 INFO] resetting WatchDogTimer
[Status 10:06:52 INFO] Starting Set [AERI set: name H186, 6 scans, 60 angle, D22500 command]
[Ingest 10:06:52 INFO] Sending XML status message
[Status 10:06:52 INFO] Mirror angle: 60
[Mirror 10:06:52 INFO] rotating to position H
[Status 10:06:53 INFO] .SET file for ACQ96 ready
[Ingest 10:06:53 INFO] Starting acquisition
[Status 10:06:54 INFO] reading housekeeping
[Status 10:07:11 INFO] acquire complete
[Status 10:07:12 INFO] writing housekeeping
[Sequencer 10:07:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:07:12 INFO] incremented H scene to 186 completed views
[Sequencer 10:07:12 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:07:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:07:12 INFO] incremented to [AERI set: name S186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:07:12 INFO] H186.SIG(18)
[sigmove 10:07:12 DEBUG] transformed H186Ma.SPC -> H186MA.SPC
[sigmove 10:07:12 DEBUG] transformed H186Mb.SPC -> H186MB.SPC
[sigmove 10:07:12 DEBUG] transformed H186Mc.SPC -> H186MC.SPC
[sigmove 10:07:12 DEBUG] transformed H186Md.SPC -> H186MD.SPC
[sigmove 10:07:12 DEBUG] transformed H186Me.SPC -> H186ME.SPC
[sigmove 10:07:12 DEBUG] transformed H186Mf.SPC -> H186MF.SPC
[Status 10:07:12 INFO] data for H186 transferred to science data processing
[Tidy 10:07:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:07:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:07:12 INFO] resetting WatchDogTimer
[Status 10:07:12 INFO] Starting Set [AERI set: name S186, 6 scans, 0 angle, D16300 command]
[Ingest 10:07:12 INFO] Sending XML status message
[Status 10:07:12 INFO] Mirror angle: 0
[Mirror 10:07:12 INFO] rotating to position S
[Status 10:07:13 INFO] .SET file for ACQ96 ready
[Ingest 10:07:14 INFO] Starting acquisition
[Status 10:07:14 INFO] reading housekeeping
[Status 10:07:31 INFO] acquire complete
[Status 10:07:32 INFO] writing housekeeping
[Sequencer 10:07:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:07:32 INFO] incremented S scene to 186 completed views
[Sequencer 10:07:32 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:07:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:07:32 INFO] incremented to [AERI set: name T186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:07:32 INFO] S186.SIG(18)
[sigmove 10:07:32 DEBUG] transformed S186Ma.SPC -> S186MA.SPC
[sigmove 10:07:32 DEBUG] transformed S186Mb.SPC -> S186MB.SPC
[sigmove 10:07:32 DEBUG] transformed S186Mc.SPC -> S186MC.SPC
[sigmove 10:07:32 DEBUG] transformed S186Md.SPC -> S186MD.SPC
[sigmove 10:07:32 DEBUG] transformed S186Me.SPC -> S186ME.SPC
[sigmove 10:07:32 DEBUG] transformed S186Mf.SPC -> S186MF.SPC
[Status 10:07:32 INFO] data for S186 transferred to science data processing
[Tidy 10:07:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:07:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:07:32 INFO] resetting WatchDogTimer
[Status 10:07:32 INFO] Starting Set [AERI set: name T186, 6 scans, 0 angle, D16300 command]
[Ingest 10:07:32 INFO] Sending XML status message
[Status 10:07:32 INFO] Mirror angle: 0
[Mirror 10:07:33 INFO] rotating to position T
[Status 10:07:33 INFO] .SET file for ACQ96 ready
[Ingest 10:07:33 INFO] Starting acquisition
[Status 10:07:34 INFO] reading housekeeping
[Status 10:07:52 INFO] acquire complete
[Status 10:07:52 INFO] writing housekeeping
[Sequencer 10:07:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:07:52 INFO] incremented T scene to 186 completed views
[Sequencer 10:07:52 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:07:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:07:52 INFO] incremented to [AERI set: name U186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:07:52 INFO] T186.SIG(18)
[sigmove 10:07:52 DEBUG] transformed T186Ma.SPC -> T186MA.SPC
[sigmove 10:07:52 DEBUG] transformed T186Mb.SPC -> T186MB.SPC
[sigmove 10:07:52 DEBUG] transformed T186Mc.SPC -> T186MC.SPC
[sigmove 10:07:52 DEBUG] transformed T186Md.SPC -> T186MD.SPC
[sigmove 10:07:52 DEBUG] transformed T186Me.SPC -> T186ME.SPC
[sigmove 10:07:52 DEBUG] transformed T186Mf.SPC -> T186MF.SPC
[Status 10:07:52 INFO] data for T186 transferred to science data processing
[Tidy 10:07:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:07:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:07:52 INFO] resetting WatchDogTimer
[Status 10:07:53 INFO] Starting Set [AERI set: name U186, 6 scans, 0 angle, D16300 command]
[Ingest 10:07:53 INFO] Sending XML status message
[Status 10:07:53 INFO] Mirror angle: 0
[Mirror 10:07:53 INFO] rotating to position U
[Status 10:07:53 INFO] .SET file for ACQ96 ready
[Ingest 10:07:53 INFO] Starting acquisition
[Status 10:07:54 INFO] reading housekeeping
[Status 10:08:12 INFO] acquire complete
[Status 10:08:12 INFO] writing housekeeping
[Sequencer 10:08:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:08:12 INFO] incremented U scene to 186 completed views
[Sequencer 10:08:12 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:08:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:08:12 INFO] incremented to [AERI set: name V186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:08:12 INFO] U186.SIG(18)
[sigmove 10:08:12 DEBUG] transformed U186Ma.SPC -> U186MA.SPC
[sigmove 10:08:12 DEBUG] transformed U186Mb.SPC -> U186MB.SPC
[sigmove 10:08:12 DEBUG] transformed U186Mc.SPC -> U186MC.SPC
[sigmove 10:08:12 DEBUG] transformed U186Md.SPC -> U186MD.SPC
[sigmove 10:08:12 DEBUG] transformed U186Me.SPC -> U186ME.SPC
[sigmove 10:08:12 DEBUG] transformed U186Mf.SPC -> U186MF.SPC
[Status 10:08:12 INFO] data for U186 transferred to science data processing
[Tidy 10:08:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:08:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:08:13 INFO] resetting WatchDogTimer
[Status 10:08:13 INFO] Starting Set [AERI set: name V186, 6 scans, 0 angle, D16300 command]
[Ingest 10:08:13 INFO] Sending XML status message
[Status 10:08:13 INFO] Mirror angle: 0
[Mirror 10:08:13 INFO] rotating to position V
[Status 10:08:13 INFO] .SET file for ACQ96 ready
[Ingest 10:08:14 INFO] Starting acquisition
[Status 10:08:14 INFO] reading housekeeping
[Status 10:08:32 INFO] acquire complete
[Status 10:08:33 INFO] writing housekeeping
[Sequencer 10:08:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:08:33 INFO] incremented V scene to 186 completed views
[Sequencer 10:08:33 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:08:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:08:33 INFO] incremented to [AERI set: name W186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:08:33 INFO] V186.SIG(18)
[sigmove 10:08:33 DEBUG] transformed V186Ma.SPC -> V186MA.SPC
[sigmove 10:08:33 DEBUG] transformed V186Mb.SPC -> V186MB.SPC
[sigmove 10:08:33 DEBUG] transformed V186Mc.SPC -> V186MC.SPC
[sigmove 10:08:33 DEBUG] transformed V186Md.SPC -> V186MD.SPC
[sigmove 10:08:33 DEBUG] transformed V186Me.SPC -> V186ME.SPC
[sigmove 10:08:33 DEBUG] transformed V186Mf.SPC -> V186MF.SPC
[Status 10:08:33 INFO] data for V186 transferred to science data processing
[Tidy 10:08:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:08:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:08:33 INFO] resetting WatchDogTimer
[Status 10:08:33 INFO] Starting Set [AERI set: name W186, 6 scans, 0 angle, D16300 command]
[Ingest 10:08:33 INFO] Sending XML status message
[Status 10:08:33 INFO] Mirror angle: 0
[Mirror 10:08:33 INFO] rotating to position W
[Status 10:08:34 INFO] .SET file for ACQ96 ready
[Ingest 10:08:34 INFO] Starting acquisition
[Status 10:08:34 INFO] reading housekeeping
[Status 10:08:52 INFO] acquire complete
[Status 10:08:53 INFO] writing housekeeping
[Sequencer 10:08:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:08:53 INFO] incremented W scene to 186 completed views
[Sequencer 10:08:53 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:08:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:08:53 INFO] incremented to [AERI set: name X186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:08:53 INFO] W186.SIG(18)
[sigmove 10:08:53 DEBUG] transformed W186Ma.SPC -> W186MA.SPC
[sigmove 10:08:53 DEBUG] transformed W186Mb.SPC -> W186MB.SPC
[sigmove 10:08:53 DEBUG] transformed W186Mc.SPC -> W186MC.SPC
[sigmove 10:08:53 DEBUG] transformed W186Md.SPC -> W186MD.SPC
[sigmove 10:08:53 DEBUG] transformed W186Me.SPC -> W186ME.SPC
[sigmove 10:08:53 DEBUG] transformed W186Mf.SPC -> W186MF.SPC
[Status 10:08:53 INFO] data for W186 transferred to science data processing
[Tidy 10:08:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:08:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:08:53 INFO] resetting WatchDogTimer
[Status 10:08:53 INFO] Starting Set [AERI set: name X186, 6 scans, 0 angle, D16300 command]
[Ingest 10:08:53 INFO] Sending XML status message
[Status 10:08:53 INFO] Mirror angle: 0
[Mirror 10:08:53 INFO] rotating to position X
[Status 10:08:54 INFO] .SET file for ACQ96 ready
[Ingest 10:08:54 INFO] Starting acquisition
[Status 10:08:54 INFO] reading housekeeping
[Status 10:09:12 INFO] acquire complete
[Status 10:09:13 INFO] writing housekeeping
[Sequencer 10:09:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:09:13 INFO] incremented X scene to 186 completed views
[Sequencer 10:09:13 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:09:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:09:13 INFO] incremented to [AERI set: name Y186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:09:13 INFO] X186.SIG(18)
[sigmove 10:09:13 DEBUG] transformed X186Ma.SPC -> X186MA.SPC
[sigmove 10:09:13 DEBUG] transformed X186Mb.SPC -> X186MB.SPC
[sigmove 10:09:13 DEBUG] transformed X186Mc.SPC -> X186MC.SPC
[sigmove 10:09:13 DEBUG] transformed X186Md.SPC -> X186MD.SPC
[sigmove 10:09:13 DEBUG] transformed X186Me.SPC -> X186ME.SPC
[sigmove 10:09:13 DEBUG] transformed X186Mf.SPC -> X186MF.SPC
[Status 10:09:13 INFO] data for X186 transferred to science data processing
[Tidy 10:09:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:09:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:09:13 INFO] resetting WatchDogTimer
[Status 10:09:13 INFO] Starting Set [AERI set: name Y186, 6 scans, 0 angle, D16300 command]
[Ingest 10:09:13 INFO] Sending XML status message
[Status 10:09:13 INFO] Mirror angle: 0
[Mirror 10:09:14 INFO] rotating to position Y
[Status 10:09:14 INFO] .SET file for ACQ96 ready
[Ingest 10:09:14 INFO] Starting acquisition
[Status 10:09:15 INFO] reading housekeeping
[Status 10:09:33 INFO] acquire complete
[Status 10:09:33 INFO] writing housekeeping
[Sequencer 10:09:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:09:33 INFO] incremented Y scene to 186 completed views
[Sequencer 10:09:33 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:09:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:09:33 INFO] incremented to [AERI set: name Z186, 6 scans, 0 angle, D16300 command] set
[sigmove 10:09:33 INFO] Y186.SIG(18)
[sigmove 10:09:33 DEBUG] transformed Y186Ma.SPC -> Y186MA.SPC
[sigmove 10:09:33 DEBUG] transformed Y186Mb.SPC -> Y186MB.SPC
[sigmove 10:09:33 DEBUG] transformed Y186Mc.SPC -> Y186MC.SPC
[sigmove 10:09:33 DEBUG] transformed Y186Md.SPC -> Y186MD.SPC
[sigmove 10:09:33 DEBUG] transformed Y186Me.SPC -> Y186ME.SPC
[sigmove 10:09:33 DEBUG] transformed Y186Mf.SPC -> Y186MF.SPC
[Status 10:09:33 INFO] data for Y186 transferred to science data processing
[Tidy 10:09:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:09:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:09:33 INFO] resetting WatchDogTimer
[Status 10:09:34 INFO] Starting Set [AERI set: name Z186, 6 scans, 0 angle, D16300 command]
[Ingest 10:09:34 INFO] Sending XML status message
[Status 10:09:34 INFO] Mirror angle: 0
[Mirror 10:09:34 INFO] rotating to position Z
[Status 10:09:34 INFO] .SET file for ACQ96 ready
[Ingest 10:09:34 INFO] Starting acquisition
[Status 10:09:35 INFO] reading housekeeping
[Status 10:09:53 INFO] acquire complete
[Status 10:09:53 INFO] writing housekeeping
[Sequencer 10:09:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:09:53 INFO] incremented Z scene to 186 completed views
[Sequencer 10:09:53 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:09:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:09:53 INFO] incremented to [AERI set: name H187, 6 scans, 60 angle, D22500 command] set
[sigmove 10:09:53 INFO] Z186.SIG(18)
[sigmove 10:09:53 DEBUG] transformed Z186Ma.SPC -> Z186MA.SPC
[sigmove 10:09:53 DEBUG] transformed Z186Mb.SPC -> Z186MB.SPC
[sigmove 10:09:53 DEBUG] transformed Z186Mc.SPC -> Z186MC.SPC
[sigmove 10:09:53 DEBUG] transformed Z186Md.SPC -> Z186MD.SPC
[sigmove 10:09:53 DEBUG] transformed Z186Me.SPC -> Z186ME.SPC
[sigmove 10:09:53 DEBUG] transformed Z186Mf.SPC -> Z186MF.SPC
[Status 10:09:53 INFO] data for Z186 transferred to science data processing
[Tidy 10:09:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:09:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:09:53 INFO] resetting WatchDogTimer
[Status 10:09:54 INFO] Starting Set [AERI set: name H187, 6 scans, 60 angle, D22500 command]
[Ingest 10:09:54 INFO] Sending XML status message
[Status 10:09:54 INFO] Mirror angle: 60
[Mirror 10:09:54 INFO] rotating to position H
[Status 10:09:55 INFO] .SET file for ACQ96 ready
[Ingest 10:09:55 INFO] Starting acquisition
[Status 10:09:55 INFO] reading housekeeping
[Status 10:10:13 INFO] acquire complete
[Status 10:10:14 INFO] writing housekeeping
[Sequencer 10:10:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:10:14 INFO] incremented H scene to 187 completed views
[Sequencer 10:10:14 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:10:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:10:14 INFO] incremented to [AERI set: name A187, 6 scans, 120 angle, D28300 command] set
[sigmove 10:10:14 INFO] H187.SIG(18)
[sigmove 10:10:14 DEBUG] transformed H187Ma.SPC -> H187MA.SPC
[sigmove 10:10:14 DEBUG] transformed H187Mb.SPC -> H187MB.SPC
[sigmove 10:10:14 DEBUG] transformed H187Mc.SPC -> H187MC.SPC
[sigmove 10:10:14 DEBUG] transformed H187Md.SPC -> H187MD.SPC
[sigmove 10:10:14 DEBUG] transformed H187Me.SPC -> H187ME.SPC
[sigmove 10:10:14 DEBUG] transformed H187Mf.SPC -> H187MF.SPC
[Status 10:10:14 INFO] data for H187 transferred to science data processing
[Tidy 10:10:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:10:14 INFO] A185.FIN(19),H185.FIN(19),S185.FIN(19),T185.FIN(19),U185.FIN(19),V185.FIN(19),W185.FIN(19),X185.FIN(19),Y185.FIN(19),Z185.FIN(19),A186.FIN(19),H186.FIN(19),S186.FIN(19),T186.FIN(19),U186.FIN(19),V186.FIN(19),W186.FIN(19),X186.FIN(19),Y186.FIN(19),Z186.FIN(19)
[sigmove 10:10:14 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:10:14 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:10:17 DEBUG] done zipping
[WatchDog 10:10:17 INFO] resetting WatchDogTimer
[Status 10:10:18 INFO] Starting Set [AERI set: name A187, 6 scans, 120 angle, D28300 command]
[Ingest 10:10:18 INFO] Sending XML status message
[Status 10:10:18 INFO] Mirror angle: 120
[Mirror 10:10:18 INFO] rotating to position A
[Status 10:10:19 INFO] .SET file for ACQ96 ready
[Ingest 10:10:19 INFO] Starting acquisition
[Status 10:10:19 INFO] reading housekeeping
[Status 10:10:38 INFO] acquire complete
[Status 10:10:38 INFO] writing housekeeping
[Sequencer 10:10:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:10:38 INFO] incremented A scene to 187 completed views
[Sequencer 10:10:38 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:10:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:10:38 INFO] incremented to [AERI set: name S187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:10:38 INFO] A187.SIG(18)
[sigmove 10:10:38 DEBUG] transformed A187Ma.SPC -> A187MA.SPC
[sigmove 10:10:38 DEBUG] transformed A187Mb.SPC -> A187MB.SPC
[sigmove 10:10:38 DEBUG] transformed A187Mc.SPC -> A187MC.SPC
[sigmove 10:10:38 DEBUG] transformed A187Md.SPC -> A187MD.SPC
[sigmove 10:10:38 DEBUG] transformed A187Me.SPC -> A187ME.SPC
[sigmove 10:10:38 DEBUG] transformed A187Mf.SPC -> A187MF.SPC
[Status 10:10:38 INFO] data for A187 transferred to science data processing
[Tidy 10:10:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:10:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:10:38 INFO] resetting WatchDogTimer
[Status 10:10:39 INFO] Starting Set [AERI set: name S187, 6 scans, 0 angle, D16300 command]
[Ingest 10:10:39 INFO] Sending XML status message
[Status 10:10:39 INFO] Mirror angle: 0
[Mirror 10:10:39 INFO] rotating to position S
[Status 10:10:40 INFO] .SET file for ACQ96 ready
[Ingest 10:10:41 INFO] Starting acquisition
[Status 10:10:41 INFO] reading housekeeping
[Status 10:10:59 INFO] acquire complete
[Status 10:11:00 INFO] writing housekeeping
[Sequencer 10:11:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:11:00 INFO] incremented S scene to 187 completed views
[Sequencer 10:11:00 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:11:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:11:00 INFO] incremented to [AERI set: name T187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:11:00 INFO] S187.SIG(18)
[sigmove 10:11:00 DEBUG] transformed S187Ma.SPC -> S187MA.SPC
[sigmove 10:11:00 DEBUG] transformed S187Mb.SPC -> S187MB.SPC
[sigmove 10:11:00 DEBUG] transformed S187Mc.SPC -> S187MC.SPC
[sigmove 10:11:00 DEBUG] transformed S187Md.SPC -> S187MD.SPC
[sigmove 10:11:00 DEBUG] transformed S187Me.SPC -> S187ME.SPC
[sigmove 10:11:00 DEBUG] transformed S187Mf.SPC -> S187MF.SPC
[Status 10:11:00 INFO] data for S187 transferred to science data processing
[Tidy 10:11:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:11:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:11:00 INFO] resetting WatchDogTimer
[Status 10:11:00 INFO] Starting Set [AERI set: name T187, 6 scans, 0 angle, D16300 command]
[Ingest 10:11:00 INFO] Sending XML status message
[Status 10:11:00 INFO] Mirror angle: 0
[Mirror 10:11:00 INFO] rotating to position T
[Status 10:11:01 INFO] .SET file for ACQ96 ready
[Ingest 10:11:01 INFO] Starting acquisition
[Status 10:11:01 INFO] reading housekeeping
[Status 10:11:22 INFO] acquire complete
[Status 10:11:23 INFO] writing housekeeping
[Sequencer 10:11:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:11:23 INFO] incremented T scene to 187 completed views
[Sequencer 10:11:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:11:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:11:23 INFO] incremented to [AERI set: name U187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:11:23 INFO] T187.SIG(18)
[sigmove 10:11:23 DEBUG] transformed T187Ma.SPC -> T187MA.SPC
[sigmove 10:11:23 DEBUG] transformed T187Mb.SPC -> T187MB.SPC
[sigmove 10:11:23 DEBUG] transformed T187Mc.SPC -> T187MC.SPC
[sigmove 10:11:23 DEBUG] transformed T187Md.SPC -> T187MD.SPC
[sigmove 10:11:23 DEBUG] transformed T187Me.SPC -> T187ME.SPC
[sigmove 10:11:23 DEBUG] transformed T187Mf.SPC -> T187MF.SPC
[Status 10:11:23 INFO] data for T187 transferred to science data processing
[Tidy 10:11:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:11:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:11:23 INFO] resetting WatchDogTimer
[Status 10:11:24 INFO] Starting Set [AERI set: name U187, 6 scans, 0 angle, D16300 command]
[Ingest 10:11:24 INFO] Sending XML status message
[Status 10:11:24 INFO] Mirror angle: 0
[Mirror 10:11:24 INFO] rotating to position U
[Status 10:11:24 INFO] .SET file for ACQ96 ready
[Ingest 10:11:24 INFO] Starting acquisition
[Status 10:11:25 INFO] reading housekeeping
[Status 10:11:43 INFO] acquire complete
[Status 10:11:43 INFO] writing housekeeping
[Sequencer 10:11:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:11:43 INFO] incremented U scene to 187 completed views
[Sequencer 10:11:43 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:11:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:11:43 INFO] incremented to [AERI set: name V187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:11:43 INFO] U187.SIG(18)
[sigmove 10:11:43 DEBUG] transformed U187Ma.SPC -> U187MA.SPC
[sigmove 10:11:43 DEBUG] transformed U187Mb.SPC -> U187MB.SPC
[sigmove 10:11:43 DEBUG] transformed U187Mc.SPC -> U187MC.SPC
[sigmove 10:11:43 DEBUG] transformed U187Md.SPC -> U187MD.SPC
[sigmove 10:11:43 DEBUG] transformed U187Me.SPC -> U187ME.SPC
[sigmove 10:11:43 DEBUG] transformed U187Mf.SPC -> U187MF.SPC
[Status 10:11:43 INFO] data for U187 transferred to science data processing
[Tidy 10:11:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:11:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:11:43 INFO] resetting WatchDogTimer
[Status 10:11:44 INFO] Starting Set [AERI set: name V187, 6 scans, 0 angle, D16300 command]
[Ingest 10:11:44 INFO] Sending XML status message
[Status 10:11:44 INFO] Mirror angle: 0
[Mirror 10:11:44 INFO] rotating to position V
[Status 10:11:44 INFO] .SET file for ACQ96 ready
[Ingest 10:11:45 INFO] Starting acquisition
[Status 10:11:45 INFO] reading housekeeping
[Status 10:12:03 INFO] acquire complete
[Status 10:12:04 INFO] writing housekeeping
[Sequencer 10:12:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:12:04 INFO] incremented V scene to 187 completed views
[Sequencer 10:12:04 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:12:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:12:04 INFO] incremented to [AERI set: name W187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:12:04 INFO] V187.SIG(18)
[sigmove 10:12:04 DEBUG] transformed V187Ma.SPC -> V187MA.SPC
[sigmove 10:12:04 DEBUG] transformed V187Mb.SPC -> V187MB.SPC
[sigmove 10:12:04 DEBUG] transformed V187Mc.SPC -> V187MC.SPC
[sigmove 10:12:04 DEBUG] transformed V187Md.SPC -> V187MD.SPC
[sigmove 10:12:04 DEBUG] transformed V187Me.SPC -> V187ME.SPC
[sigmove 10:12:04 DEBUG] transformed V187Mf.SPC -> V187MF.SPC
[Status 10:12:04 INFO] data for V187 transferred to science data processing
[Tidy 10:12:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:12:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:12:04 INFO] resetting WatchDogTimer
[Status 10:12:04 INFO] Starting Set [AERI set: name W187, 6 scans, 0 angle, D16300 command]
[Ingest 10:12:04 INFO] Sending XML status message
[Status 10:12:04 INFO] Mirror angle: 0
[Mirror 10:12:04 INFO] rotating to position W
[Status 10:12:05 INFO] .SET file for ACQ96 ready
[Ingest 10:12:05 INFO] Starting acquisition
[Status 10:12:05 INFO] reading housekeeping
[Status 10:12:23 INFO] acquire complete
[Status 10:12:24 INFO] writing housekeeping
[Sequencer 10:12:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:12:24 INFO] incremented W scene to 187 completed views
[Sequencer 10:12:24 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:12:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:12:24 INFO] incremented to [AERI set: name X187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:12:24 INFO] W187.SIG(18)
[sigmove 10:12:24 DEBUG] transformed W187Ma.SPC -> W187MA.SPC
[sigmove 10:12:24 DEBUG] transformed W187Mb.SPC -> W187MB.SPC
[sigmove 10:12:24 DEBUG] transformed W187Mc.SPC -> W187MC.SPC
[sigmove 10:12:24 DEBUG] transformed W187Md.SPC -> W187MD.SPC
[sigmove 10:12:24 DEBUG] transformed W187Me.SPC -> W187ME.SPC
[sigmove 10:12:24 DEBUG] transformed W187Mf.SPC -> W187MF.SPC
[Status 10:12:24 INFO] data for W187 transferred to science data processing
[Tidy 10:12:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:12:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:12:24 INFO] resetting WatchDogTimer
[Status 10:12:24 INFO] Starting Set [AERI set: name X187, 6 scans, 0 angle, D16300 command]
[Ingest 10:12:24 INFO] Sending XML status message
[Status 10:12:24 INFO] Mirror angle: 0
[Mirror 10:12:24 INFO] rotating to position X
[Status 10:12:25 INFO] .SET file for ACQ96 ready
[Ingest 10:12:25 INFO] Starting acquisition
[Status 10:12:25 INFO] reading housekeeping
[Status 10:12:43 INFO] acquire complete
[Status 10:12:44 INFO] writing housekeeping
[Sequencer 10:12:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:12:44 INFO] incremented X scene to 187 completed views
[Sequencer 10:12:44 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:12:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:12:44 INFO] incremented to [AERI set: name Y187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:12:44 INFO] X187.SIG(18)
[sigmove 10:12:44 DEBUG] transformed X187Ma.SPC -> X187MA.SPC
[sigmove 10:12:44 DEBUG] transformed X187Mb.SPC -> X187MB.SPC
[sigmove 10:12:44 DEBUG] transformed X187Mc.SPC -> X187MC.SPC
[sigmove 10:12:44 DEBUG] transformed X187Md.SPC -> X187MD.SPC
[sigmove 10:12:44 DEBUG] transformed X187Me.SPC -> X187ME.SPC
[sigmove 10:12:44 DEBUG] transformed X187Mf.SPC -> X187MF.SPC
[Status 10:12:44 INFO] data for X187 transferred to science data processing
[Tidy 10:12:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:12:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:12:44 INFO] resetting WatchDogTimer
[Status 10:12:44 INFO] Starting Set [AERI set: name Y187, 6 scans, 0 angle, D16300 command]
[Ingest 10:12:44 INFO] Sending XML status message
[Status 10:12:44 INFO] Mirror angle: 0
[Mirror 10:12:45 INFO] rotating to position Y
[Status 10:12:45 INFO] .SET file for ACQ96 ready
[Ingest 10:12:45 INFO] Starting acquisition
[Status 10:12:45 INFO] reading housekeeping
[Status 10:13:03 INFO] acquire complete
[Status 10:13:05 INFO] writing housekeeping
[Sequencer 10:13:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:13:05 INFO] incremented Y scene to 187 completed views
[Sequencer 10:13:05 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:13:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:13:05 INFO] incremented to [AERI set: name Z187, 6 scans, 0 angle, D16300 command] set
[sigmove 10:13:05 INFO] Y187.SIG(18)
[sigmove 10:13:05 DEBUG] transformed Y187Ma.SPC -> Y187MA.SPC
[sigmove 10:13:05 DEBUG] transformed Y187Mb.SPC -> Y187MB.SPC
[sigmove 10:13:05 DEBUG] transformed Y187Mc.SPC -> Y187MC.SPC
[sigmove 10:13:05 DEBUG] transformed Y187Md.SPC -> Y187MD.SPC
[sigmove 10:13:05 DEBUG] transformed Y187Me.SPC -> Y187ME.SPC
[sigmove 10:13:05 DEBUG] transformed Y187Mf.SPC -> Y187MF.SPC
[Status 10:13:05 INFO] data for Y187 transferred to science data processing
[Tidy 10:13:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:13:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:13:05 INFO] resetting WatchDogTimer
[Status 10:13:06 INFO] Starting Set [AERI set: name Z187, 6 scans, 0 angle, D16300 command]
[Ingest 10:13:06 INFO] Sending XML status message
[Status 10:13:06 INFO] Mirror angle: 0
[Mirror 10:13:06 INFO] rotating to position Z
[Status 10:13:06 INFO] .SET file for ACQ96 ready
[Ingest 10:13:07 INFO] Starting acquisition
[Status 10:13:07 INFO] reading housekeeping
[Status 10:13:25 INFO] acquire complete
[Status 10:13:26 INFO] writing housekeeping
[Sequencer 10:13:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:13:26 INFO] incremented Z scene to 187 completed views
[Sequencer 10:13:26 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:13:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:13:26 INFO] incremented to [AERI set: name A188, 6 scans, 120 angle, D28300 command] set
[sigmove 10:13:26 INFO] Z187.SIG(18)
[sigmove 10:13:26 DEBUG] transformed Z187Ma.SPC -> Z187MA.SPC
[sigmove 10:13:26 DEBUG] transformed Z187Mb.SPC -> Z187MB.SPC
[sigmove 10:13:26 DEBUG] transformed Z187Mc.SPC -> Z187MC.SPC
[sigmove 10:13:26 DEBUG] transformed Z187Md.SPC -> Z187MD.SPC
[sigmove 10:13:26 DEBUG] transformed Z187Me.SPC -> Z187ME.SPC
[sigmove 10:13:26 DEBUG] transformed Z187Mf.SPC -> Z187MF.SPC
[Status 10:13:26 INFO] data for Z187 transferred to science data processing
[Tidy 10:13:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:13:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:13:26 INFO] resetting WatchDogTimer
[Status 10:13:26 INFO] Starting Set [AERI set: name A188, 6 scans, 120 angle, D28300 command]
[Ingest 10:13:26 INFO] Sending XML status message
[Status 10:13:26 INFO] Mirror angle: 120
[Mirror 10:13:26 INFO] rotating to position A
[Status 10:13:27 INFO] .SET file for ACQ96 ready
[Ingest 10:13:28 INFO] Starting acquisition
[Status 10:13:28 INFO] reading housekeeping
[Status 10:13:46 INFO] acquire complete
[Status 10:13:47 INFO] writing housekeeping
[Sequencer 10:13:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:13:47 INFO] incremented A scene to 188 completed views
[Sequencer 10:13:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:13:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:13:47 INFO] incremented to [AERI set: name H188, 6 scans, 60 angle, D22500 command] set
[sigmove 10:13:47 INFO] A188.SIG(18)
[sigmove 10:13:47 DEBUG] transformed A188Ma.SPC -> A188MA.SPC
[sigmove 10:13:47 DEBUG] transformed A188Mb.SPC -> A188MB.SPC
[sigmove 10:13:47 DEBUG] transformed A188Mc.SPC -> A188MC.SPC
[sigmove 10:13:47 DEBUG] transformed A188Md.SPC -> A188MD.SPC
[sigmove 10:13:47 DEBUG] transformed A188Me.SPC -> A188ME.SPC
[sigmove 10:13:47 DEBUG] transformed A188Mf.SPC -> A188MF.SPC
[Status 10:13:47 INFO] data for A188 transferred to science data processing
[Tidy 10:13:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:13:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:13:47 INFO] resetting WatchDogTimer
[Status 10:13:47 INFO] Starting Set [AERI set: name H188, 6 scans, 60 angle, D22500 command]
[Ingest 10:13:47 INFO] Sending XML status message
[Status 10:13:47 INFO] Mirror angle: 60
[Mirror 10:13:47 INFO] rotating to position H
[Status 10:13:48 INFO] .SET file for ACQ96 ready
[Ingest 10:13:49 INFO] Starting acquisition
[Status 10:13:49 INFO] reading housekeeping
[Status 10:14:06 INFO] acquire complete
[Status 10:14:07 INFO] writing housekeeping
[Sequencer 10:14:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:14:07 INFO] incremented H scene to 188 completed views
[Sequencer 10:14:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:14:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:14:07 INFO] incremented to [AERI set: name S188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:14:07 INFO] H188.SIG(18)
[sigmove 10:14:07 DEBUG] transformed H188Ma.SPC -> H188MA.SPC
[sigmove 10:14:07 DEBUG] transformed H188Mb.SPC -> H188MB.SPC
[sigmove 10:14:07 DEBUG] transformed H188Mc.SPC -> H188MC.SPC
[sigmove 10:14:07 DEBUG] transformed H188Md.SPC -> H188MD.SPC
[sigmove 10:14:07 DEBUG] transformed H188Me.SPC -> H188ME.SPC
[sigmove 10:14:07 DEBUG] transformed H188Mf.SPC -> H188MF.SPC
[Status 10:14:07 INFO] data for H188 transferred to science data processing
[Tidy 10:14:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:14:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:14:07 INFO] resetting WatchDogTimer
[Status 10:14:07 INFO] Starting Set [AERI set: name S188, 6 scans, 0 angle, D16300 command]
[Ingest 10:14:07 INFO] Sending XML status message
[Status 10:14:07 INFO] Mirror angle: 0
[Mirror 10:14:08 INFO] rotating to position S
[Status 10:14:08 INFO] .SET file for ACQ96 ready
[Ingest 10:14:09 INFO] Starting acquisition
[Status 10:14:09 INFO] reading housekeeping
[Status 10:14:26 INFO] acquire complete
[Status 10:14:27 INFO] writing housekeeping
[Sequencer 10:14:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:14:27 INFO] incremented S scene to 188 completed views
[Sequencer 10:14:27 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:14:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:14:27 INFO] incremented to [AERI set: name T188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:14:27 INFO] S188.SIG(18)
[sigmove 10:14:27 DEBUG] transformed S188Ma.SPC -> S188MA.SPC
[sigmove 10:14:27 DEBUG] transformed S188Mb.SPC -> S188MB.SPC
[sigmove 10:14:27 DEBUG] transformed S188Mc.SPC -> S188MC.SPC
[sigmove 10:14:27 DEBUG] transformed S188Md.SPC -> S188MD.SPC
[sigmove 10:14:27 DEBUG] transformed S188Me.SPC -> S188ME.SPC
[sigmove 10:14:27 DEBUG] transformed S188Mf.SPC -> S188MF.SPC
[Status 10:14:27 INFO] data for S188 transferred to science data processing
[Tidy 10:14:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:14:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:14:27 INFO] resetting WatchDogTimer
[Status 10:14:27 INFO] Starting Set [AERI set: name T188, 6 scans, 0 angle, D16300 command]
[Ingest 10:14:27 INFO] Sending XML status message
[Status 10:14:27 INFO] Mirror angle: 0
[Mirror 10:14:28 INFO] rotating to position T
[Status 10:14:28 INFO] .SET file for ACQ96 ready
[Ingest 10:14:28 INFO] Starting acquisition
[Status 10:14:29 INFO] reading housekeeping
[Status 10:14:47 INFO] acquire complete
[Status 10:14:47 INFO] writing housekeeping
[Sequencer 10:14:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:14:47 INFO] incremented T scene to 188 completed views
[Sequencer 10:14:47 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:14:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:14:47 INFO] incremented to [AERI set: name U188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:14:47 INFO] T188.SIG(18)
[sigmove 10:14:47 DEBUG] transformed T188Ma.SPC -> T188MA.SPC
[sigmove 10:14:47 DEBUG] transformed T188Mb.SPC -> T188MB.SPC
[sigmove 10:14:47 DEBUG] transformed T188Mc.SPC -> T188MC.SPC
[sigmove 10:14:47 DEBUG] transformed T188Md.SPC -> T188MD.SPC
[sigmove 10:14:47 DEBUG] transformed T188Me.SPC -> T188ME.SPC
[sigmove 10:14:47 DEBUG] transformed T188Mf.SPC -> T188MF.SPC
[Status 10:14:47 INFO] data for T188 transferred to science data processing
[Tidy 10:14:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:14:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:14:47 INFO] resetting WatchDogTimer
[Status 10:14:48 INFO] Starting Set [AERI set: name U188, 6 scans, 0 angle, D16300 command]
[Ingest 10:14:48 INFO] Sending XML status message
[Status 10:14:48 INFO] Mirror angle: 0
[Mirror 10:14:48 INFO] rotating to position U
[Status 10:14:48 INFO] .SET file for ACQ96 ready
[Ingest 10:14:49 INFO] Starting acquisition
[Status 10:14:49 INFO] reading housekeeping
[Status 10:15:07 INFO] acquire complete
[Status 10:15:08 INFO] writing housekeeping
[Sequencer 10:15:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:15:08 INFO] incremented U scene to 188 completed views
[Sequencer 10:15:08 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:15:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:15:08 INFO] incremented to [AERI set: name V188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:15:08 INFO] U188.SIG(18)
[sigmove 10:15:08 DEBUG] transformed U188Ma.SPC -> U188MA.SPC
[sigmove 10:15:08 DEBUG] transformed U188Mb.SPC -> U188MB.SPC
[sigmove 10:15:08 DEBUG] transformed U188Mc.SPC -> U188MC.SPC
[sigmove 10:15:08 DEBUG] transformed U188Md.SPC -> U188MD.SPC
[sigmove 10:15:08 DEBUG] transformed U188Me.SPC -> U188ME.SPC
[sigmove 10:15:08 DEBUG] transformed U188Mf.SPC -> U188MF.SPC
[Status 10:15:08 INFO] data for U188 transferred to science data processing
[Tidy 10:15:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:15:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:15:08 INFO] resetting WatchDogTimer
[Status 10:15:08 INFO] Starting Set [AERI set: name V188, 6 scans, 0 angle, D16300 command]
[Ingest 10:15:08 INFO] Sending XML status message
[Status 10:15:08 INFO] Mirror angle: 0
[Mirror 10:15:08 INFO] rotating to position V
[Status 10:15:09 INFO] .SET file for ACQ96 ready
[Ingest 10:15:09 INFO] Starting acquisition
[Status 10:15:09 INFO] reading housekeeping
[Status 10:15:27 INFO] acquire complete
[Status 10:15:28 INFO] writing housekeeping
[Sequencer 10:15:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:15:28 INFO] incremented V scene to 188 completed views
[Sequencer 10:15:28 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:15:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:15:28 INFO] incremented to [AERI set: name W188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:15:28 INFO] V188.SIG(18)
[sigmove 10:15:28 DEBUG] transformed V188Ma.SPC -> V188MA.SPC
[sigmove 10:15:28 DEBUG] transformed V188Mb.SPC -> V188MB.SPC
[sigmove 10:15:28 DEBUG] transformed V188Mc.SPC -> V188MC.SPC
[sigmove 10:15:28 DEBUG] transformed V188Md.SPC -> V188MD.SPC
[sigmove 10:15:28 DEBUG] transformed V188Me.SPC -> V188ME.SPC
[sigmove 10:15:28 DEBUG] transformed V188Mf.SPC -> V188MF.SPC
[Status 10:15:28 INFO] data for V188 transferred to science data processing
[Tidy 10:15:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:15:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:15:28 INFO] resetting WatchDogTimer
[Status 10:15:28 INFO] Starting Set [AERI set: name W188, 6 scans, 0 angle, D16300 command]
[Ingest 10:15:28 INFO] Sending XML status message
[Status 10:15:28 INFO] Mirror angle: 0
[Mirror 10:15:28 INFO] rotating to position W
[Status 10:15:29 INFO] .SET file for ACQ96 ready
[Ingest 10:15:29 INFO] Starting acquisition
[Status 10:15:29 INFO] reading housekeeping
[Status 10:15:47 INFO] acquire complete
[Status 10:15:48 INFO] writing housekeeping
[Sequencer 10:15:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:15:48 INFO] incremented W scene to 188 completed views
[Sequencer 10:15:48 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:15:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:15:48 INFO] incremented to [AERI set: name X188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:15:48 INFO] W188.SIG(18)
[sigmove 10:15:48 DEBUG] transformed W188Ma.SPC -> W188MA.SPC
[sigmove 10:15:48 DEBUG] transformed W188Mb.SPC -> W188MB.SPC
[sigmove 10:15:48 DEBUG] transformed W188Mc.SPC -> W188MC.SPC
[sigmove 10:15:48 DEBUG] transformed W188Md.SPC -> W188MD.SPC
[sigmove 10:15:48 DEBUG] transformed W188Me.SPC -> W188ME.SPC
[sigmove 10:15:48 DEBUG] transformed W188Mf.SPC -> W188MF.SPC
[Status 10:15:48 INFO] data for W188 transferred to science data processing
[Tidy 10:15:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:15:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:15:48 INFO] resetting WatchDogTimer
[Status 10:15:48 INFO] Starting Set [AERI set: name X188, 6 scans, 0 angle, D16300 command]
[Ingest 10:15:48 INFO] Sending XML status message
[Status 10:15:48 INFO] Mirror angle: 0
[Mirror 10:15:49 INFO] rotating to position X
[Status 10:15:49 INFO] .SET file for ACQ96 ready
[Ingest 10:15:49 INFO] Starting acquisition
[Status 10:15:49 INFO] reading housekeeping
[Status 10:16:07 INFO] acquire complete
[Status 10:16:08 INFO] writing housekeeping
[Sequencer 10:16:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:16:08 INFO] incremented X scene to 188 completed views
[Sequencer 10:16:08 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:16:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:16:08 INFO] incremented to [AERI set: name Y188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:16:08 INFO] X188.SIG(18)
[sigmove 10:16:08 DEBUG] transformed X188Ma.SPC -> X188MA.SPC
[sigmove 10:16:08 DEBUG] transformed X188Mb.SPC -> X188MB.SPC
[sigmove 10:16:08 DEBUG] transformed X188Mc.SPC -> X188MC.SPC
[sigmove 10:16:08 DEBUG] transformed X188Md.SPC -> X188MD.SPC
[sigmove 10:16:08 DEBUG] transformed X188Me.SPC -> X188ME.SPC
[sigmove 10:16:08 DEBUG] transformed X188Mf.SPC -> X188MF.SPC
[Status 10:16:08 INFO] data for X188 transferred to science data processing
[Tidy 10:16:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:16:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:16:08 INFO] resetting WatchDogTimer
[Status 10:16:09 INFO] Starting Set [AERI set: name Y188, 6 scans, 0 angle, D16300 command]
[Ingest 10:16:09 INFO] Sending XML status message
[Status 10:16:09 INFO] Mirror angle: 0
[Mirror 10:16:09 INFO] rotating to position Y
[Status 10:16:09 INFO] .SET file for ACQ96 ready
[Ingest 10:16:09 INFO] Starting acquisition
[Status 10:16:10 INFO] reading housekeeping
[Status 10:16:28 INFO] acquire complete
[Status 10:16:28 INFO] writing housekeeping
[Sequencer 10:16:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:16:28 INFO] incremented Y scene to 188 completed views
[Sequencer 10:16:28 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:16:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:16:28 INFO] incremented to [AERI set: name Z188, 6 scans, 0 angle, D16300 command] set
[sigmove 10:16:28 INFO] Y188.SIG(18)
[sigmove 10:16:28 DEBUG] transformed Y188Ma.SPC -> Y188MA.SPC
[sigmove 10:16:28 DEBUG] transformed Y188Mb.SPC -> Y188MB.SPC
[sigmove 10:16:28 DEBUG] transformed Y188Mc.SPC -> Y188MC.SPC
[sigmove 10:16:28 DEBUG] transformed Y188Md.SPC -> Y188MD.SPC
[sigmove 10:16:28 DEBUG] transformed Y188Me.SPC -> Y188ME.SPC
[sigmove 10:16:28 DEBUG] transformed Y188Mf.SPC -> Y188MF.SPC
[Status 10:16:28 INFO] data for Y188 transferred to science data processing
[Tidy 10:16:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:16:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:16:28 INFO] resetting WatchDogTimer
[Status 10:16:29 INFO] Starting Set [AERI set: name Z188, 6 scans, 0 angle, D16300 command]
[Ingest 10:16:29 INFO] Sending XML status message
[Status 10:16:29 INFO] Mirror angle: 0
[Mirror 10:16:29 INFO] rotating to position Z
[Status 10:16:29 INFO] .SET file for ACQ96 ready
[Ingest 10:16:30 INFO] Starting acquisition
[Status 10:16:30 INFO] reading housekeeping
[Status 10:16:48 INFO] acquire complete
[Status 10:16:49 INFO] writing housekeeping
[Sequencer 10:16:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:16:49 INFO] incremented Z scene to 188 completed views
[Sequencer 10:16:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:16:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:16:49 INFO] incremented to [AERI set: name H189, 6 scans, 60 angle, D22500 command] set
[sigmove 10:16:49 INFO] Z188.SIG(18)
[sigmove 10:16:49 DEBUG] transformed Z188Ma.SPC -> Z188MA.SPC
[sigmove 10:16:49 DEBUG] transformed Z188Mb.SPC -> Z188MB.SPC
[sigmove 10:16:49 DEBUG] transformed Z188Mc.SPC -> Z188MC.SPC
[sigmove 10:16:49 DEBUG] transformed Z188Md.SPC -> Z188MD.SPC
[sigmove 10:16:49 DEBUG] transformed Z188Me.SPC -> Z188ME.SPC
[sigmove 10:16:49 DEBUG] transformed Z188Mf.SPC -> Z188MF.SPC
[Status 10:16:49 INFO] data for Z188 transferred to science data processing
[Tidy 10:16:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:16:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:16:49 INFO] resetting WatchDogTimer
[Status 10:16:49 INFO] Starting Set [AERI set: name H189, 6 scans, 60 angle, D22500 command]
[Ingest 10:16:49 INFO] Sending XML status message
[Status 10:16:49 INFO] Mirror angle: 60
[Mirror 10:16:49 INFO] rotating to position H
[Status 10:16:50 INFO] .SET file for ACQ96 ready
[Ingest 10:16:50 INFO] Starting acquisition
[Status 10:16:51 INFO] reading housekeeping
[Status 10:17:08 INFO] acquire complete
[Status 10:17:09 INFO] writing housekeeping
[Sequencer 10:17:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:17:09 INFO] incremented H scene to 189 completed views
[Sequencer 10:17:09 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:17:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:17:09 INFO] incremented to [AERI set: name A189, 6 scans, 120 angle, D28300 command] set
[sigmove 10:17:09 INFO] H189.SIG(18)
[sigmove 10:17:09 DEBUG] transformed H189Ma.SPC -> H189MA.SPC
[sigmove 10:17:09 DEBUG] transformed H189Mb.SPC -> H189MB.SPC
[sigmove 10:17:09 DEBUG] transformed H189Mc.SPC -> H189MC.SPC
[sigmove 10:17:09 DEBUG] transformed H189Md.SPC -> H189MD.SPC
[sigmove 10:17:09 DEBUG] transformed H189Me.SPC -> H189ME.SPC
[sigmove 10:17:09 DEBUG] transformed H189Mf.SPC -> H189MF.SPC
[Status 10:17:09 INFO] data for H189 transferred to science data processing
[Tidy 10:17:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:17:09 INFO] A187.FIN(19),H187.FIN(19),S187.FIN(19),T187.FIN(19),U187.FIN(19),V187.FIN(19),W187.FIN(19),X187.FIN(19),Y187.FIN(19),Z187.FIN(19),A188.FIN(19),H188.FIN(19),S188.FIN(19),T188.FIN(19),U188.FIN(19),V188.FIN(19),W188.FIN(19),X188.FIN(19),Y188.FIN(19),Z188.FIN(19)
[sigmove 10:17:09 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:17:09 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:17:12 DEBUG] done zipping
[WatchDog 10:17:13 INFO] resetting WatchDogTimer
[Status 10:17:13 INFO] Starting Set [AERI set: name A189, 6 scans, 120 angle, D28300 command]
[Ingest 10:17:13 INFO] Sending XML status message
[Status 10:17:13 INFO] Mirror angle: 120
[Mirror 10:17:13 INFO] rotating to position A
[Status 10:17:14 INFO] .SET file for ACQ96 ready
[Ingest 10:17:14 INFO] Starting acquisition
[Status 10:17:14 INFO] reading housekeeping
[Status 10:17:33 INFO] acquire complete
[Status 10:17:33 INFO] writing housekeeping
[Sequencer 10:17:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:17:33 INFO] incremented A scene to 189 completed views
[Sequencer 10:17:33 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:17:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:17:33 INFO] incremented to [AERI set: name S189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:17:33 INFO] A189.SIG(18)
[sigmove 10:17:34 DEBUG] transformed A189Ma.SPC -> A189MA.SPC
[sigmove 10:17:34 DEBUG] transformed A189Mb.SPC -> A189MB.SPC
[sigmove 10:17:34 DEBUG] transformed A189Mc.SPC -> A189MC.SPC
[sigmove 10:17:34 DEBUG] transformed A189Md.SPC -> A189MD.SPC
[sigmove 10:17:34 DEBUG] transformed A189Me.SPC -> A189ME.SPC
[sigmove 10:17:34 DEBUG] transformed A189Mf.SPC -> A189MF.SPC
[Status 10:17:34 INFO] data for A189 transferred to science data processing
[Tidy 10:17:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:17:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:17:34 INFO] resetting WatchDogTimer
[Status 10:17:34 INFO] Starting Set [AERI set: name S189, 6 scans, 0 angle, D16300 command]
[Ingest 10:17:34 INFO] Sending XML status message
[Status 10:17:34 INFO] Mirror angle: 0
[Mirror 10:17:34 INFO] rotating to position S
[Status 10:17:35 INFO] .SET file for ACQ96 ready
[Ingest 10:17:36 INFO] Starting acquisition
[Status 10:17:36 INFO] reading housekeeping
[Status 10:17:54 INFO] acquire complete
[Status 10:17:55 INFO] writing housekeeping
[Sequencer 10:17:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:17:55 INFO] incremented S scene to 189 completed views
[Sequencer 10:17:55 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:17:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:17:55 INFO] incremented to [AERI set: name T189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:17:55 INFO] S189.SIG(18)
[sigmove 10:17:55 DEBUG] transformed S189Ma.SPC -> S189MA.SPC
[sigmove 10:17:55 DEBUG] transformed S189Mb.SPC -> S189MB.SPC
[sigmove 10:17:55 DEBUG] transformed S189Mc.SPC -> S189MC.SPC
[sigmove 10:17:55 DEBUG] transformed S189Md.SPC -> S189MD.SPC
[sigmove 10:17:55 DEBUG] transformed S189Me.SPC -> S189ME.SPC
[sigmove 10:17:55 DEBUG] transformed S189Mf.SPC -> S189MF.SPC
[Status 10:17:55 INFO] data for S189 transferred to science data processing
[Tidy 10:17:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:17:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:17:55 INFO] resetting WatchDogTimer
[Status 10:17:55 INFO] Starting Set [AERI set: name T189, 6 scans, 0 angle, D16300 command]
[Ingest 10:17:55 INFO] Sending XML status message
[Status 10:17:55 INFO] Mirror angle: 0
[Mirror 10:17:55 INFO] rotating to position T
[Status 10:17:56 INFO] .SET file for ACQ96 ready
[Ingest 10:17:56 INFO] Starting acquisition
[Status 10:17:56 INFO] reading housekeeping
[Status 10:18:14 INFO] acquire complete
[Status 10:18:15 INFO] writing housekeeping
[Sequencer 10:18:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:18:15 INFO] incremented T scene to 189 completed views
[Sequencer 10:18:15 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:18:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:18:15 INFO] incremented to [AERI set: name U189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:18:15 INFO] T189.SIG(18)
[sigmove 10:18:15 DEBUG] transformed T189Ma.SPC -> T189MA.SPC
[sigmove 10:18:15 DEBUG] transformed T189Mb.SPC -> T189MB.SPC
[sigmove 10:18:15 DEBUG] transformed T189Mc.SPC -> T189MC.SPC
[sigmove 10:18:15 DEBUG] transformed T189Md.SPC -> T189MD.SPC
[sigmove 10:18:15 DEBUG] transformed T189Me.SPC -> T189ME.SPC
[sigmove 10:18:15 DEBUG] transformed T189Mf.SPC -> T189MF.SPC
[Status 10:18:15 INFO] data for T189 transferred to science data processing
[Tidy 10:18:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:18:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:18:15 INFO] resetting WatchDogTimer
[Status 10:18:15 INFO] Starting Set [AERI set: name U189, 6 scans, 0 angle, D16300 command]
[Ingest 10:18:15 INFO] Sending XML status message
[Status 10:18:15 INFO] Mirror angle: 0
[Mirror 10:18:16 INFO] rotating to position U
[Status 10:18:16 INFO] .SET file for ACQ96 ready
[Ingest 10:18:16 INFO] Starting acquisition
[Status 10:18:16 INFO] reading housekeeping
[Status 10:18:34 INFO] acquire complete
[Status 10:18:35 INFO] writing housekeeping
[Sequencer 10:18:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:18:35 INFO] incremented U scene to 189 completed views
[Sequencer 10:18:35 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:18:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:18:35 INFO] incremented to [AERI set: name V189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:18:35 INFO] U189.SIG(18)
[sigmove 10:18:35 DEBUG] transformed U189Ma.SPC -> U189MA.SPC
[sigmove 10:18:35 DEBUG] transformed U189Mb.SPC -> U189MB.SPC
[sigmove 10:18:35 DEBUG] transformed U189Mc.SPC -> U189MC.SPC
[sigmove 10:18:35 DEBUG] transformed U189Md.SPC -> U189MD.SPC
[sigmove 10:18:35 DEBUG] transformed U189Me.SPC -> U189ME.SPC
[sigmove 10:18:35 DEBUG] transformed U189Mf.SPC -> U189MF.SPC
[Status 10:18:35 INFO] data for U189 transferred to science data processing
[Tidy 10:18:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:18:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:18:35 INFO] resetting WatchDogTimer
[Status 10:18:35 INFO] Starting Set [AERI set: name V189, 6 scans, 0 angle, D16300 command]
[Ingest 10:18:35 INFO] Sending XML status message
[Status 10:18:35 INFO] Mirror angle: 0
[Mirror 10:18:36 INFO] rotating to position V
[Status 10:18:36 INFO] .SET file for ACQ96 ready
[Ingest 10:18:36 INFO] Starting acquisition
[Status 10:18:37 INFO] reading housekeeping
[Status 10:18:55 INFO] acquire complete
[Status 10:18:55 INFO] writing housekeeping
[Sequencer 10:18:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:18:55 INFO] incremented V scene to 189 completed views
[Sequencer 10:18:55 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:18:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:18:55 INFO] incremented to [AERI set: name W189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:18:55 INFO] V189.SIG(18)
[sigmove 10:18:55 DEBUG] transformed V189Ma.SPC -> V189MA.SPC
[sigmove 10:18:55 DEBUG] transformed V189Mb.SPC -> V189MB.SPC
[sigmove 10:18:55 DEBUG] transformed V189Mc.SPC -> V189MC.SPC
[sigmove 10:18:55 DEBUG] transformed V189Md.SPC -> V189MD.SPC
[sigmove 10:18:55 DEBUG] transformed V189Me.SPC -> V189ME.SPC
[sigmove 10:18:55 DEBUG] transformed V189Mf.SPC -> V189MF.SPC
[Status 10:18:55 INFO] data for V189 transferred to science data processing
[Tidy 10:18:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:18:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:18:55 INFO] resetting WatchDogTimer
[Status 10:18:56 INFO] Starting Set [AERI set: name W189, 6 scans, 0 angle, D16300 command]
[Ingest 10:18:56 INFO] Sending XML status message
[Status 10:18:56 INFO] Mirror angle: 0
[Mirror 10:18:56 INFO] rotating to position W
[Status 10:18:56 INFO] .SET file for ACQ96 ready
[Ingest 10:18:57 INFO] Starting acquisition
[Status 10:18:57 INFO] reading housekeeping
[Status 10:19:15 INFO] acquire complete
[Status 10:19:16 INFO] writing housekeeping
[Sequencer 10:19:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:19:16 INFO] incremented W scene to 189 completed views
[Sequencer 10:19:16 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:19:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:19:16 INFO] incremented to [AERI set: name X189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:19:16 INFO] W189.SIG(18)
[sigmove 10:19:16 DEBUG] transformed W189Ma.SPC -> W189MA.SPC
[sigmove 10:19:16 DEBUG] transformed W189Mb.SPC -> W189MB.SPC
[sigmove 10:19:16 DEBUG] transformed W189Mc.SPC -> W189MC.SPC
[sigmove 10:19:16 DEBUG] transformed W189Md.SPC -> W189MD.SPC
[sigmove 10:19:16 DEBUG] transformed W189Me.SPC -> W189ME.SPC
[sigmove 10:19:16 DEBUG] transformed W189Mf.SPC -> W189MF.SPC
[Status 10:19:16 INFO] data for W189 transferred to science data processing
[Tidy 10:19:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:19:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:19:16 INFO] resetting WatchDogTimer
[Status 10:19:16 INFO] Starting Set [AERI set: name X189, 6 scans, 0 angle, D16300 command]
[Ingest 10:19:16 INFO] Sending XML status message
[Status 10:19:16 INFO] Mirror angle: 0
[Mirror 10:19:16 INFO] rotating to position X
[Status 10:19:17 INFO] .SET file for ACQ96 ready
[Ingest 10:19:17 INFO] Starting acquisition
[Status 10:19:17 INFO] reading housekeeping
[Status 10:19:35 INFO] acquire complete
[Status 10:19:36 INFO] writing housekeeping
[Sequencer 10:19:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:19:36 INFO] incremented X scene to 189 completed views
[Sequencer 10:19:36 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:19:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:19:36 INFO] incremented to [AERI set: name Y189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:19:36 INFO] X189.SIG(18)
[sigmove 10:19:36 DEBUG] transformed X189Ma.SPC -> X189MA.SPC
[sigmove 10:19:36 DEBUG] transformed X189Mb.SPC -> X189MB.SPC
[sigmove 10:19:36 DEBUG] transformed X189Mc.SPC -> X189MC.SPC
[sigmove 10:19:36 DEBUG] transformed X189Md.SPC -> X189MD.SPC
[sigmove 10:19:36 DEBUG] transformed X189Me.SPC -> X189ME.SPC
[sigmove 10:19:36 DEBUG] transformed X189Mf.SPC -> X189MF.SPC
[Status 10:19:36 INFO] data for X189 transferred to science data processing
[Tidy 10:19:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:19:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:19:36 INFO] resetting WatchDogTimer
[Status 10:19:36 INFO] Starting Set [AERI set: name Y189, 6 scans, 0 angle, D16300 command]
[Ingest 10:19:36 INFO] Sending XML status message
[Status 10:19:36 INFO] Mirror angle: 0
[Mirror 10:19:36 INFO] rotating to position Y
[Status 10:19:37 INFO] .SET file for ACQ96 ready
[Ingest 10:19:37 INFO] Starting acquisition
[Status 10:19:37 INFO] reading housekeeping
[Status 10:19:55 INFO] acquire complete
[Status 10:19:56 INFO] writing housekeeping
[Sequencer 10:19:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:19:56 INFO] incremented Y scene to 189 completed views
[Sequencer 10:19:56 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:19:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:19:56 INFO] incremented to [AERI set: name Z189, 6 scans, 0 angle, D16300 command] set
[sigmove 10:19:56 INFO] Y189.SIG(18)
[sigmove 10:19:56 DEBUG] transformed Y189Ma.SPC -> Y189MA.SPC
[sigmove 10:19:56 DEBUG] transformed Y189Mb.SPC -> Y189MB.SPC
[sigmove 10:19:56 DEBUG] transformed Y189Mc.SPC -> Y189MC.SPC
[sigmove 10:19:56 DEBUG] transformed Y189Md.SPC -> Y189MD.SPC
[sigmove 10:19:56 DEBUG] transformed Y189Me.SPC -> Y189ME.SPC
[sigmove 10:19:56 DEBUG] transformed Y189Mf.SPC -> Y189MF.SPC
[Status 10:19:56 INFO] data for Y189 transferred to science data processing
[Tidy 10:19:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:19:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:19:56 INFO] resetting WatchDogTimer
[Status 10:19:56 INFO] Starting Set [AERI set: name Z189, 6 scans, 0 angle, D16300 command]
[Ingest 10:19:56 INFO] Sending XML status message
[Status 10:19:56 INFO] Mirror angle: 0
[Mirror 10:19:57 INFO] rotating to position Z
[Status 10:19:57 INFO] .SET file for ACQ96 ready
[Ingest 10:19:57 INFO] Starting acquisition
[Status 10:19:57 INFO] reading housekeeping
[Status 10:20:15 INFO] acquire complete
[Status 10:20:16 INFO] writing housekeeping
[Sequencer 10:20:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:20:16 INFO] incremented Z scene to 189 completed views
[Sequencer 10:20:16 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:20:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:20:16 INFO] incremented to [AERI set: name A190, 6 scans, 120 angle, D28300 command] set
[sigmove 10:20:16 INFO] Z189.SIG(18)
[sigmove 10:20:16 DEBUG] transformed Z189Ma.SPC -> Z189MA.SPC
[sigmove 10:20:16 DEBUG] transformed Z189Mb.SPC -> Z189MB.SPC
[sigmove 10:20:16 DEBUG] transformed Z189Mc.SPC -> Z189MC.SPC
[sigmove 10:20:16 DEBUG] transformed Z189Md.SPC -> Z189MD.SPC
[sigmove 10:20:16 DEBUG] transformed Z189Me.SPC -> Z189ME.SPC
[sigmove 10:20:16 DEBUG] transformed Z189Mf.SPC -> Z189MF.SPC
[Status 10:20:16 INFO] data for Z189 transferred to science data processing
[Tidy 10:20:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:20:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:20:16 INFO] resetting WatchDogTimer
[Status 10:20:16 INFO] Starting Set [AERI set: name A190, 6 scans, 120 angle, D28300 command]
[Ingest 10:20:16 INFO] Sending XML status message
[Status 10:20:16 INFO] Mirror angle: 120
[Mirror 10:20:17 INFO] rotating to position A
[Status 10:20:18 INFO] .SET file for ACQ96 ready
[Ingest 10:20:18 INFO] Starting acquisition
[Status 10:20:19 INFO] reading housekeeping
[Status 10:20:37 INFO] acquire complete
[Status 10:20:37 INFO] writing housekeeping
[Sequencer 10:20:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:20:37 INFO] incremented A scene to 190 completed views
[Sequencer 10:20:37 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:20:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:20:37 INFO] incremented to [AERI set: name H190, 6 scans, 60 angle, D22500 command] set
[sigmove 10:20:37 INFO] A190.SIG(18)
[sigmove 10:20:37 DEBUG] transformed A190Ma.SPC -> A190MA.SPC
[sigmove 10:20:37 DEBUG] transformed A190Mb.SPC -> A190MB.SPC
[sigmove 10:20:37 DEBUG] transformed A190Mc.SPC -> A190MC.SPC
[sigmove 10:20:37 DEBUG] transformed A190Md.SPC -> A190MD.SPC
[sigmove 10:20:37 DEBUG] transformed A190Me.SPC -> A190ME.SPC
[sigmove 10:20:37 DEBUG] transformed A190Mf.SPC -> A190MF.SPC
[Status 10:20:37 INFO] data for A190 transferred to science data processing
[Tidy 10:20:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:20:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:20:37 INFO] resetting WatchDogTimer
[Status 10:20:38 INFO] Starting Set [AERI set: name H190, 6 scans, 60 angle, D22500 command]
[Ingest 10:20:38 INFO] Sending XML status message
[Status 10:20:38 INFO] Mirror angle: 60
[Mirror 10:20:38 INFO] rotating to position H
[Status 10:20:39 INFO] .SET file for ACQ96 ready
[Ingest 10:20:39 INFO] Starting acquisition
[Status 10:20:39 INFO] reading housekeeping
[Status 10:20:57 INFO] acquire complete
[Status 10:20:58 INFO] writing housekeeping
[Sequencer 10:20:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:20:58 INFO] incremented H scene to 190 completed views
[Sequencer 10:20:58 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:20:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:20:58 INFO] incremented to [AERI set: name S190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:20:58 INFO] H190.SIG(18)
[sigmove 10:20:58 DEBUG] transformed H190Ma.SPC -> H190MA.SPC
[sigmove 10:20:58 DEBUG] transformed H190Mb.SPC -> H190MB.SPC
[sigmove 10:20:58 DEBUG] transformed H190Mc.SPC -> H190MC.SPC
[sigmove 10:20:58 DEBUG] transformed H190Md.SPC -> H190MD.SPC
[sigmove 10:20:58 DEBUG] transformed H190Me.SPC -> H190ME.SPC
[sigmove 10:20:58 DEBUG] transformed H190Mf.SPC -> H190MF.SPC
[Status 10:20:58 INFO] data for H190 transferred to science data processing
[Tidy 10:20:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:20:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:20:58 INFO] resetting WatchDogTimer
[Status 10:20:58 INFO] Starting Set [AERI set: name S190, 6 scans, 0 angle, D16300 command]
[Ingest 10:20:58 INFO] Sending XML status message
[Status 10:20:58 INFO] Mirror angle: 0
[Mirror 10:20:58 INFO] rotating to position S
[Status 10:20:59 INFO] .SET file for ACQ96 ready
[Ingest 10:20:59 INFO] Starting acquisition
[Status 10:21:00 INFO] reading housekeeping
[Status 10:21:17 INFO] acquire complete
[Status 10:21:18 INFO] writing housekeeping
[Sequencer 10:21:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:21:18 INFO] incremented S scene to 190 completed views
[Sequencer 10:21:18 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:21:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:21:18 INFO] incremented to [AERI set: name T190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:21:18 INFO] S190.SIG(18)
[sigmove 10:21:18 DEBUG] transformed S190Ma.SPC -> S190MA.SPC
[sigmove 10:21:18 DEBUG] transformed S190Mb.SPC -> S190MB.SPC
[sigmove 10:21:18 DEBUG] transformed S190Mc.SPC -> S190MC.SPC
[sigmove 10:21:18 DEBUG] transformed S190Md.SPC -> S190MD.SPC
[sigmove 10:21:18 DEBUG] transformed S190Me.SPC -> S190ME.SPC
[sigmove 10:21:18 DEBUG] transformed S190Mf.SPC -> S190MF.SPC
[Status 10:21:18 INFO] data for S190 transferred to science data processing
[Tidy 10:21:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:21:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:21:18 INFO] resetting WatchDogTimer
[Status 10:21:18 INFO] Starting Set [AERI set: name T190, 6 scans, 0 angle, D16300 command]
[Ingest 10:21:18 INFO] Sending XML status message
[Status 10:21:18 INFO] Mirror angle: 0
[Mirror 10:21:18 INFO] rotating to position T
[Status 10:21:19 INFO] .SET file for ACQ96 ready
[Ingest 10:21:19 INFO] Starting acquisition
[Status 10:21:19 INFO] reading housekeeping
[Status 10:21:37 INFO] acquire complete
[Status 10:21:38 INFO] writing housekeeping
[Sequencer 10:21:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:21:38 INFO] incremented T scene to 190 completed views
[Sequencer 10:21:38 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:21:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:21:38 INFO] incremented to [AERI set: name U190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:21:38 INFO] T190.SIG(18)
[sigmove 10:21:38 DEBUG] transformed T190Ma.SPC -> T190MA.SPC
[sigmove 10:21:38 DEBUG] transformed T190Mb.SPC -> T190MB.SPC
[sigmove 10:21:38 DEBUG] transformed T190Mc.SPC -> T190MC.SPC
[sigmove 10:21:38 DEBUG] transformed T190Md.SPC -> T190MD.SPC
[sigmove 10:21:38 DEBUG] transformed T190Me.SPC -> T190ME.SPC
[sigmove 10:21:38 DEBUG] transformed T190Mf.SPC -> T190MF.SPC
[Status 10:21:38 INFO] data for T190 transferred to science data processing
[Tidy 10:21:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:21:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:21:38 INFO] resetting WatchDogTimer
[Status 10:21:38 INFO] Starting Set [AERI set: name U190, 6 scans, 0 angle, D16300 command]
[Ingest 10:21:38 INFO] Sending XML status message
[Status 10:21:38 INFO] Mirror angle: 0
[Mirror 10:21:39 INFO] rotating to position U
[Status 10:21:39 INFO] .SET file for ACQ96 ready
[Ingest 10:21:39 INFO] Starting acquisition
[Status 10:21:40 INFO] reading housekeeping
[Status 10:21:58 INFO] acquire complete
[Status 10:21:58 INFO] writing housekeeping
[Sequencer 10:21:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:21:58 INFO] incremented U scene to 190 completed views
[Sequencer 10:21:58 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:21:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:21:58 INFO] incremented to [AERI set: name V190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:21:58 INFO] U190.SIG(18)
[sigmove 10:21:58 DEBUG] transformed U190Ma.SPC -> U190MA.SPC
[sigmove 10:21:58 DEBUG] transformed U190Mb.SPC -> U190MB.SPC
[sigmove 10:21:58 DEBUG] transformed U190Mc.SPC -> U190MC.SPC
[sigmove 10:21:58 DEBUG] transformed U190Md.SPC -> U190MD.SPC
[sigmove 10:21:58 DEBUG] transformed U190Me.SPC -> U190ME.SPC
[sigmove 10:21:58 DEBUG] transformed U190Mf.SPC -> U190MF.SPC
[Status 10:21:58 INFO] data for U190 transferred to science data processing
[Tidy 10:21:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:21:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:21:58 INFO] resetting WatchDogTimer
[Status 10:21:59 INFO] Starting Set [AERI set: name V190, 6 scans, 0 angle, D16300 command]
[Ingest 10:21:59 INFO] Sending XML status message
[Status 10:21:59 INFO] Mirror angle: 0
[Mirror 10:21:59 INFO] rotating to position V
[Status 10:21:59 INFO] .SET file for ACQ96 ready
[Ingest 10:21:59 INFO] Starting acquisition
[Status 10:22:00 INFO] reading housekeeping
[Status 10:22:18 INFO] acquire complete
[Status 10:22:18 INFO] writing housekeeping
[Sequencer 10:22:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:22:18 INFO] incremented V scene to 190 completed views
[Sequencer 10:22:18 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:22:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:22:18 INFO] incremented to [AERI set: name W190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:22:18 INFO] V190.SIG(18)
[sigmove 10:22:18 DEBUG] transformed V190Ma.SPC -> V190MA.SPC
[sigmove 10:22:18 DEBUG] transformed V190Mb.SPC -> V190MB.SPC
[sigmove 10:22:18 DEBUG] transformed V190Mc.SPC -> V190MC.SPC
[sigmove 10:22:18 DEBUG] transformed V190Md.SPC -> V190MD.SPC
[sigmove 10:22:18 DEBUG] transformed V190Me.SPC -> V190ME.SPC
[sigmove 10:22:18 DEBUG] transformed V190Mf.SPC -> V190MF.SPC
[Status 10:22:18 INFO] data for V190 transferred to science data processing
[Tidy 10:22:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:22:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:22:18 INFO] resetting WatchDogTimer
[Status 10:22:19 INFO] Starting Set [AERI set: name W190, 6 scans, 0 angle, D16300 command]
[Ingest 10:22:19 INFO] Sending XML status message
[Status 10:22:19 INFO] Mirror angle: 0
[Mirror 10:22:19 INFO] rotating to position W
[Status 10:22:19 INFO] .SET file for ACQ96 ready
[Ingest 10:22:20 INFO] Starting acquisition
[Status 10:22:20 INFO] reading housekeeping
[Status 10:22:38 INFO] acquire complete
[Status 10:22:39 INFO] writing housekeeping
[Sequencer 10:22:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:22:39 INFO] incremented W scene to 190 completed views
[Sequencer 10:22:39 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:22:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:22:39 INFO] incremented to [AERI set: name X190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:22:39 INFO] W190.SIG(18)
[sigmove 10:22:39 DEBUG] transformed W190Ma.SPC -> W190MA.SPC
[sigmove 10:22:39 DEBUG] transformed W190Mb.SPC -> W190MB.SPC
[sigmove 10:22:39 DEBUG] transformed W190Mc.SPC -> W190MC.SPC
[sigmove 10:22:39 DEBUG] transformed W190Md.SPC -> W190MD.SPC
[sigmove 10:22:39 DEBUG] transformed W190Me.SPC -> W190ME.SPC
[sigmove 10:22:39 DEBUG] transformed W190Mf.SPC -> W190MF.SPC
[Status 10:22:39 INFO] data for W190 transferred to science data processing
[Tidy 10:22:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:22:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:22:39 INFO] resetting WatchDogTimer
[Status 10:22:39 INFO] Starting Set [AERI set: name X190, 6 scans, 0 angle, D16300 command]
[Ingest 10:22:39 INFO] Sending XML status message
[Status 10:22:39 INFO] Mirror angle: 0
[Mirror 10:22:39 INFO] rotating to position X
[Status 10:22:40 INFO] .SET file for ACQ96 ready
[Ingest 10:22:40 INFO] Starting acquisition
[Status 10:22:40 INFO] reading housekeeping
[Status 10:22:58 INFO] acquire complete
[Status 10:22:59 INFO] writing housekeeping
[Sequencer 10:22:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:22:59 INFO] incremented X scene to 190 completed views
[Sequencer 10:22:59 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:22:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:22:59 INFO] incremented to [AERI set: name Y190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:22:59 INFO] X190.SIG(18)
[sigmove 10:22:59 DEBUG] transformed X190Ma.SPC -> X190MA.SPC
[sigmove 10:22:59 DEBUG] transformed X190Mb.SPC -> X190MB.SPC
[sigmove 10:22:59 DEBUG] transformed X190Mc.SPC -> X190MC.SPC
[sigmove 10:22:59 DEBUG] transformed X190Md.SPC -> X190MD.SPC
[sigmove 10:22:59 DEBUG] transformed X190Me.SPC -> X190ME.SPC
[sigmove 10:22:59 DEBUG] transformed X190Mf.SPC -> X190MF.SPC
[Status 10:22:59 INFO] data for X190 transferred to science data processing
[Tidy 10:22:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:22:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:22:59 INFO] resetting WatchDogTimer
[Status 10:22:59 INFO] Starting Set [AERI set: name Y190, 6 scans, 0 angle, D16300 command]
[Ingest 10:22:59 INFO] Sending XML status message
[Status 10:22:59 INFO] Mirror angle: 0
[Mirror 10:22:59 INFO] rotating to position Y
[Status 10:23:00 INFO] .SET file for ACQ96 ready
[Ingest 10:23:00 INFO] Starting acquisition
[Status 10:23:00 INFO] reading housekeeping
[Status 10:23:18 INFO] acquire complete
[Status 10:23:19 INFO] writing housekeeping
[Sequencer 10:23:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:23:19 INFO] incremented Y scene to 190 completed views
[Sequencer 10:23:19 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:23:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:23:19 INFO] incremented to [AERI set: name Z190, 6 scans, 0 angle, D16300 command] set
[sigmove 10:23:19 INFO] Y190.SIG(18)
[sigmove 10:23:19 DEBUG] transformed Y190Ma.SPC -> Y190MA.SPC
[sigmove 10:23:19 DEBUG] transformed Y190Mb.SPC -> Y190MB.SPC
[sigmove 10:23:19 DEBUG] transformed Y190Mc.SPC -> Y190MC.SPC
[sigmove 10:23:19 DEBUG] transformed Y190Md.SPC -> Y190MD.SPC
[sigmove 10:23:19 DEBUG] transformed Y190Me.SPC -> Y190ME.SPC
[sigmove 10:23:19 DEBUG] transformed Y190Mf.SPC -> Y190MF.SPC
[Status 10:23:19 INFO] data for Y190 transferred to science data processing
[Tidy 10:23:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:23:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:23:19 INFO] resetting WatchDogTimer
[Status 10:23:19 INFO] Starting Set [AERI set: name Z190, 6 scans, 0 angle, D16300 command]
[Ingest 10:23:19 INFO] Sending XML status message
[Status 10:23:19 INFO] Mirror angle: 0
[Mirror 10:23:20 INFO] rotating to position Z
[Status 10:23:20 INFO] .SET file for ACQ96 ready
[Ingest 10:23:20 INFO] Starting acquisition
[Status 10:23:20 INFO] reading housekeeping
[Status 10:23:38 INFO] acquire complete
[Status 10:23:39 INFO] writing housekeeping
[Sequencer 10:23:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:23:39 INFO] incremented Z scene to 190 completed views
[Sequencer 10:23:39 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:23:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:23:39 INFO] incremented to [AERI set: name H191, 6 scans, 60 angle, D22500 command] set
[sigmove 10:23:39 INFO] Z190.SIG(18)
[sigmove 10:23:39 DEBUG] transformed Z190Ma.SPC -> Z190MA.SPC
[sigmove 10:23:39 DEBUG] transformed Z190Mb.SPC -> Z190MB.SPC
[sigmove 10:23:39 DEBUG] transformed Z190Mc.SPC -> Z190MC.SPC
[sigmove 10:23:39 DEBUG] transformed Z190Md.SPC -> Z190MD.SPC
[sigmove 10:23:39 DEBUG] transformed Z190Me.SPC -> Z190ME.SPC
[sigmove 10:23:39 DEBUG] transformed Z190Mf.SPC -> Z190MF.SPC
[Status 10:23:39 INFO] data for Z190 transferred to science data processing
[Tidy 10:23:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:23:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:23:39 INFO] resetting WatchDogTimer
[Status 10:23:39 INFO] Starting Set [AERI set: name H191, 6 scans, 60 angle, D22500 command]
[Ingest 10:23:39 INFO] Sending XML status message
[Status 10:23:40 INFO] Mirror angle: 60
[Mirror 10:23:40 INFO] rotating to position H
[Status 10:23:41 INFO] .SET file for ACQ96 ready
[Ingest 10:23:41 INFO] Starting acquisition
[Status 10:23:41 INFO] reading housekeeping
[Status 10:23:59 INFO] acquire complete
[Status 10:23:59 INFO] writing housekeeping
[Sequencer 10:23:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:23:59 INFO] incremented H scene to 191 completed views
[Sequencer 10:23:59 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:23:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:23:59 INFO] incremented to [AERI set: name A191, 6 scans, 120 angle, D28300 command] set
[sigmove 10:23:59 INFO] H191.SIG(18)
[sigmove 10:23:59 DEBUG] transformed H191Ma.SPC -> H191MA.SPC
[sigmove 10:23:59 DEBUG] transformed H191Mb.SPC -> H191MB.SPC
[sigmove 10:23:59 DEBUG] transformed H191Mc.SPC -> H191MC.SPC
[sigmove 10:23:59 DEBUG] transformed H191Md.SPC -> H191MD.SPC
[sigmove 10:23:59 DEBUG] transformed H191Me.SPC -> H191ME.SPC
[sigmove 10:23:59 DEBUG] transformed H191Mf.SPC -> H191MF.SPC
[Status 10:23:59 INFO] data for H191 transferred to science data processing
[Tidy 10:23:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:24:00 INFO] A189.FIN(19),H189.FIN(19),S189.FIN(19),T189.FIN(19),U189.FIN(19),V189.FIN(19),W189.FIN(19),X189.FIN(19),Y189.FIN(19),Z189.FIN(19),A190.FIN(19),H190.FIN(19),S190.FIN(19),T190.FIN(19),U190.FIN(19),V190.FIN(19),W190.FIN(19),X190.FIN(19),Y190.FIN(19),Z190.FIN(19)
[sigmove 10:24:00 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:24:00 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:24:03 DEBUG] done zipping
[WatchDog 10:24:03 INFO] resetting WatchDogTimer
[Status 10:24:03 INFO] Starting Set [AERI set: name A191, 6 scans, 120 angle, D28300 command]
[Ingest 10:24:03 INFO] Sending XML status message
[Status 10:24:03 INFO] Mirror angle: 120
[Mirror 10:24:04 INFO] rotating to position A
[Status 10:24:05 INFO] .SET file for ACQ96 ready
[Ingest 10:24:05 INFO] Starting acquisition
[Status 10:24:05 INFO] reading housekeeping
[Status 10:24:23 INFO] acquire complete
[Status 10:24:24 INFO] writing housekeeping
[Sequencer 10:24:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:24:24 INFO] incremented A scene to 191 completed views
[Sequencer 10:24:24 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:24:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:24:24 INFO] incremented to [AERI set: name S191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:24:24 INFO] A191.SIG(18)
[sigmove 10:24:24 DEBUG] transformed A191Ma.SPC -> A191MA.SPC
[sigmove 10:24:24 DEBUG] transformed A191Mb.SPC -> A191MB.SPC
[sigmove 10:24:24 DEBUG] transformed A191Mc.SPC -> A191MC.SPC
[sigmove 10:24:24 DEBUG] transformed A191Md.SPC -> A191MD.SPC
[sigmove 10:24:24 DEBUG] transformed A191Me.SPC -> A191ME.SPC
[sigmove 10:24:24 DEBUG] transformed A191Mf.SPC -> A191MF.SPC
[Status 10:24:24 INFO] data for A191 transferred to science data processing
[Tidy 10:24:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:24:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:24:24 INFO] resetting WatchDogTimer
[Status 10:24:24 INFO] Starting Set [AERI set: name S191, 6 scans, 0 angle, D16300 command]
[Ingest 10:24:24 INFO] Sending XML status message
[Status 10:24:24 INFO] Mirror angle: 0
[Mirror 10:24:25 INFO] rotating to position S
[Status 10:24:26 INFO] .SET file for ACQ96 ready
[Ingest 10:24:26 INFO] Starting acquisition
[Status 10:24:27 INFO] reading housekeeping
[Status 10:24:45 INFO] acquire complete
[Status 10:24:45 INFO] writing housekeeping
[Sequencer 10:24:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:24:45 INFO] incremented S scene to 191 completed views
[Sequencer 10:24:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:24:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:24:45 INFO] incremented to [AERI set: name T191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:24:45 INFO] S191.SIG(18)
[sigmove 10:24:45 DEBUG] transformed S191Ma.SPC -> S191MA.SPC
[sigmove 10:24:45 DEBUG] transformed S191Mb.SPC -> S191MB.SPC
[sigmove 10:24:45 DEBUG] transformed S191Mc.SPC -> S191MC.SPC
[sigmove 10:24:45 DEBUG] transformed S191Md.SPC -> S191MD.SPC
[sigmove 10:24:45 DEBUG] transformed S191Me.SPC -> S191ME.SPC
[sigmove 10:24:45 DEBUG] transformed S191Mf.SPC -> S191MF.SPC
[Status 10:24:45 INFO] data for S191 transferred to science data processing
[Tidy 10:24:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:24:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:24:45 INFO] resetting WatchDogTimer
[Status 10:24:46 INFO] Starting Set [AERI set: name T191, 6 scans, 0 angle, D16300 command]
[Ingest 10:24:46 INFO] Sending XML status message
[Status 10:24:46 INFO] Mirror angle: 0
[Mirror 10:24:46 INFO] rotating to position T
[Status 10:24:46 INFO] .SET file for ACQ96 ready
[Ingest 10:24:47 INFO] Starting acquisition
[Status 10:24:47 INFO] reading housekeeping
[Status 10:25:05 INFO] acquire complete
[Status 10:25:06 INFO] writing housekeeping
[Sequencer 10:25:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:25:06 INFO] incremented T scene to 191 completed views
[Sequencer 10:25:06 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:25:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:25:06 INFO] incremented to [AERI set: name U191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:25:06 INFO] T191.SIG(18)
[sigmove 10:25:06 DEBUG] transformed T191Ma.SPC -> T191MA.SPC
[sigmove 10:25:06 DEBUG] transformed T191Mb.SPC -> T191MB.SPC
[sigmove 10:25:06 DEBUG] transformed T191Mc.SPC -> T191MC.SPC
[sigmove 10:25:06 DEBUG] transformed T191Md.SPC -> T191MD.SPC
[sigmove 10:25:06 DEBUG] transformed T191Me.SPC -> T191ME.SPC
[sigmove 10:25:06 DEBUG] transformed T191Mf.SPC -> T191MF.SPC
[Status 10:25:06 INFO] data for T191 transferred to science data processing
[Tidy 10:25:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:25:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:25:06 INFO] resetting WatchDogTimer
[Status 10:25:06 INFO] Starting Set [AERI set: name U191, 6 scans, 0 angle, D16300 command]
[Ingest 10:25:06 INFO] Sending XML status message
[Status 10:25:06 INFO] Mirror angle: 0
[Mirror 10:25:06 INFO] rotating to position U
[Status 10:25:07 INFO] .SET file for ACQ96 ready
[Ingest 10:25:07 INFO] Starting acquisition
[Status 10:25:07 INFO] reading housekeeping
[Status 10:25:25 INFO] acquire complete
[Status 10:25:26 INFO] writing housekeeping
[Sequencer 10:25:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:25:26 INFO] incremented U scene to 191 completed views
[Sequencer 10:25:26 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:25:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:25:26 INFO] incremented to [AERI set: name V191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:25:26 INFO] U191.SIG(18)
[sigmove 10:25:26 DEBUG] transformed U191Ma.SPC -> U191MA.SPC
[sigmove 10:25:26 DEBUG] transformed U191Mb.SPC -> U191MB.SPC
[sigmove 10:25:26 DEBUG] transformed U191Mc.SPC -> U191MC.SPC
[sigmove 10:25:26 DEBUG] transformed U191Md.SPC -> U191MD.SPC
[sigmove 10:25:26 DEBUG] transformed U191Me.SPC -> U191ME.SPC
[sigmove 10:25:26 DEBUG] transformed U191Mf.SPC -> U191MF.SPC
[Status 10:25:26 INFO] data for U191 transferred to science data processing
[Tidy 10:25:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:25:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:25:26 INFO] resetting WatchDogTimer
[Status 10:25:26 INFO] Starting Set [AERI set: name V191, 6 scans, 0 angle, D16300 command]
[Ingest 10:25:26 INFO] Sending XML status message
[Status 10:25:26 INFO] Mirror angle: 0
[Mirror 10:25:26 INFO] rotating to position V
[Status 10:25:27 INFO] .SET file for ACQ96 ready
[Ingest 10:25:27 INFO] Starting acquisition
[Status 10:25:27 INFO] reading housekeeping
[Status 10:25:45 INFO] acquire complete
[Status 10:25:46 INFO] writing housekeeping
[Sequencer 10:25:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:25:46 INFO] incremented V scene to 191 completed views
[Sequencer 10:25:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:25:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:25:46 INFO] incremented to [AERI set: name W191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:25:46 INFO] V191.SIG(18)
[sigmove 10:25:46 DEBUG] transformed V191Ma.SPC -> V191MA.SPC
[sigmove 10:25:46 DEBUG] transformed V191Mb.SPC -> V191MB.SPC
[sigmove 10:25:46 DEBUG] transformed V191Mc.SPC -> V191MC.SPC
[sigmove 10:25:46 DEBUG] transformed V191Md.SPC -> V191MD.SPC
[sigmove 10:25:46 DEBUG] transformed V191Me.SPC -> V191ME.SPC
[sigmove 10:25:46 DEBUG] transformed V191Mf.SPC -> V191MF.SPC
[Status 10:25:46 INFO] data for V191 transferred to science data processing
[Tidy 10:25:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:25:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:25:46 INFO] resetting WatchDogTimer
[Status 10:25:46 INFO] Starting Set [AERI set: name W191, 6 scans, 0 angle, D16300 command]
[Ingest 10:25:46 INFO] Sending XML status message
[Status 10:25:46 INFO] Mirror angle: 0
[Mirror 10:25:47 INFO] rotating to position W
[Status 10:25:47 INFO] .SET file for ACQ96 ready
[Ingest 10:25:47 INFO] Starting acquisition
[Status 10:25:47 INFO] reading housekeeping
[Status 10:26:05 INFO] acquire complete
[Status 10:26:06 INFO] writing housekeeping
[Sequencer 10:26:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:26:06 INFO] incremented W scene to 191 completed views
[Sequencer 10:26:06 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:26:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:26:06 INFO] incremented to [AERI set: name X191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:26:06 INFO] W191.SIG(18)
[sigmove 10:26:06 DEBUG] transformed W191Ma.SPC -> W191MA.SPC
[sigmove 10:26:06 DEBUG] transformed W191Mb.SPC -> W191MB.SPC
[sigmove 10:26:06 DEBUG] transformed W191Mc.SPC -> W191MC.SPC
[sigmove 10:26:06 DEBUG] transformed W191Md.SPC -> W191MD.SPC
[sigmove 10:26:06 DEBUG] transformed W191Me.SPC -> W191ME.SPC
[sigmove 10:26:06 DEBUG] transformed W191Mf.SPC -> W191MF.SPC
[Status 10:26:06 INFO] data for W191 transferred to science data processing
[Tidy 10:26:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:26:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:26:06 INFO] resetting WatchDogTimer
[Status 10:26:06 INFO] Starting Set [AERI set: name X191, 6 scans, 0 angle, D16300 command]
[Ingest 10:26:06 INFO] Sending XML status message
[Status 10:26:06 INFO] Mirror angle: 0
[Mirror 10:26:07 INFO] rotating to position X
[Status 10:26:07 INFO] .SET file for ACQ96 ready
[Ingest 10:26:07 INFO] Starting acquisition
[Status 10:26:08 INFO] reading housekeeping
[Status 10:26:26 INFO] acquire complete
[Status 10:26:26 INFO] writing housekeeping
[Sequencer 10:26:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:26:26 INFO] incremented X scene to 191 completed views
[Sequencer 10:26:26 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:26:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:26:26 INFO] incremented to [AERI set: name Y191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:26:26 INFO] X191.SIG(18)
[sigmove 10:26:26 DEBUG] transformed X191Ma.SPC -> X191MA.SPC
[sigmove 10:26:26 DEBUG] transformed X191Mb.SPC -> X191MB.SPC
[sigmove 10:26:26 DEBUG] transformed X191Mc.SPC -> X191MC.SPC
[sigmove 10:26:26 DEBUG] transformed X191Md.SPC -> X191MD.SPC
[sigmove 10:26:26 DEBUG] transformed X191Me.SPC -> X191ME.SPC
[sigmove 10:26:26 DEBUG] transformed X191Mf.SPC -> X191MF.SPC
[Status 10:26:26 INFO] data for X191 transferred to science data processing
[Tidy 10:26:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:26:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:26:26 INFO] resetting WatchDogTimer
[Status 10:26:27 INFO] Starting Set [AERI set: name Y191, 6 scans, 0 angle, D16300 command]
[Ingest 10:26:27 INFO] Sending XML status message
[Status 10:26:27 INFO] Mirror angle: 0
[Mirror 10:26:27 INFO] rotating to position Y
[Status 10:26:27 INFO] .SET file for ACQ96 ready
[Ingest 10:26:28 INFO] Starting acquisition
[Status 10:26:28 INFO] reading housekeeping
[Status 10:26:46 INFO] acquire complete
[Status 10:26:47 INFO] writing housekeeping
[Sequencer 10:26:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:26:47 INFO] incremented Y scene to 191 completed views
[Sequencer 10:26:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:26:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:26:47 INFO] incremented to [AERI set: name Z191, 6 scans, 0 angle, D16300 command] set
[sigmove 10:26:47 INFO] Y191.SIG(18)
[sigmove 10:26:47 DEBUG] transformed Y191Ma.SPC -> Y191MA.SPC
[sigmove 10:26:47 DEBUG] transformed Y191Mb.SPC -> Y191MB.SPC
[sigmove 10:26:47 DEBUG] transformed Y191Mc.SPC -> Y191MC.SPC
[sigmove 10:26:47 DEBUG] transformed Y191Md.SPC -> Y191MD.SPC
[sigmove 10:26:47 DEBUG] transformed Y191Me.SPC -> Y191ME.SPC
[sigmove 10:26:47 DEBUG] transformed Y191Mf.SPC -> Y191MF.SPC
[Status 10:26:47 INFO] data for Y191 transferred to science data processing
[Tidy 10:26:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:26:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:26:47 INFO] resetting WatchDogTimer
[Status 10:26:47 INFO] Starting Set [AERI set: name Z191, 6 scans, 0 angle, D16300 command]
[Ingest 10:26:47 INFO] Sending XML status message
[Status 10:26:47 INFO] Mirror angle: 0
[Mirror 10:26:47 INFO] rotating to position Z
[Status 10:26:47 INFO] .SET file for ACQ96 ready
[Ingest 10:26:48 INFO] Starting acquisition
[Status 10:26:48 INFO] reading housekeeping
[Status 10:27:06 INFO] acquire complete
[Status 10:27:07 INFO] writing housekeeping
[Sequencer 10:27:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:27:07 INFO] incremented Z scene to 191 completed views
[Sequencer 10:27:07 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:27:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:27:07 INFO] incremented to [AERI set: name A192, 6 scans, 120 angle, D28300 command] set
[sigmove 10:27:07 INFO] Z191.SIG(18)
[sigmove 10:27:07 DEBUG] transformed Z191Ma.SPC -> Z191MA.SPC
[sigmove 10:27:07 DEBUG] transformed Z191Mb.SPC -> Z191MB.SPC
[sigmove 10:27:07 DEBUG] transformed Z191Mc.SPC -> Z191MC.SPC
[sigmove 10:27:07 DEBUG] transformed Z191Md.SPC -> Z191MD.SPC
[sigmove 10:27:07 DEBUG] transformed Z191Me.SPC -> Z191ME.SPC
[sigmove 10:27:07 DEBUG] transformed Z191Mf.SPC -> Z191MF.SPC
[Status 10:27:07 INFO] data for Z191 transferred to science data processing
[Tidy 10:27:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:27:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:27:07 INFO] resetting WatchDogTimer
[Status 10:27:07 INFO] Starting Set [AERI set: name A192, 6 scans, 120 angle, D28300 command]
[Ingest 10:27:07 INFO] Sending XML status message
[Status 10:27:07 INFO] Mirror angle: 120
[Mirror 10:27:07 INFO] rotating to position A
[Status 10:27:09 INFO] .SET file for ACQ96 ready
[Ingest 10:27:09 INFO] Starting acquisition
[Status 10:27:09 INFO] reading housekeeping
[Status 10:27:27 INFO] acquire complete
[Status 10:27:28 INFO] writing housekeeping
[Sequencer 10:27:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:27:28 INFO] incremented A scene to 192 completed views
[Sequencer 10:27:28 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:27:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:27:28 INFO] incremented to [AERI set: name H192, 6 scans, 60 angle, D22500 command] set
[sigmove 10:27:28 INFO] A192.SIG(18)
[sigmove 10:27:28 DEBUG] transformed A192Ma.SPC -> A192MA.SPC
[sigmove 10:27:28 DEBUG] transformed A192Mb.SPC -> A192MB.SPC
[sigmove 10:27:28 DEBUG] transformed A192Mc.SPC -> A192MC.SPC
[sigmove 10:27:28 DEBUG] transformed A192Md.SPC -> A192MD.SPC
[sigmove 10:27:28 DEBUG] transformed A192Me.SPC -> A192ME.SPC
[sigmove 10:27:28 DEBUG] transformed A192Mf.SPC -> A192MF.SPC
[Status 10:27:28 INFO] data for A192 transferred to science data processing
[Tidy 10:27:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:27:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:27:28 INFO] resetting WatchDogTimer
[Status 10:27:28 INFO] Starting Set [AERI set: name H192, 6 scans, 60 angle, D22500 command]
[Ingest 10:27:28 INFO] Sending XML status message
[Status 10:27:28 INFO] Mirror angle: 60
[Mirror 10:27:29 INFO] rotating to position H
[Status 10:27:30 INFO] .SET file for ACQ96 ready
[Ingest 10:27:30 INFO] Starting acquisition
[Status 10:27:30 INFO] reading housekeeping
[Status 10:27:49 INFO] acquire complete
[Status 10:27:49 INFO] writing housekeeping
[Sequencer 10:27:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:27:49 INFO] incremented H scene to 192 completed views
[Sequencer 10:27:49 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:27:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:27:49 INFO] incremented to [AERI set: name S192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:27:49 INFO] H192.SIG(18)
[sigmove 10:27:49 DEBUG] transformed H192Ma.SPC -> H192MA.SPC
[sigmove 10:27:49 DEBUG] transformed H192Mb.SPC -> H192MB.SPC
[sigmove 10:27:49 DEBUG] transformed H192Mc.SPC -> H192MC.SPC
[sigmove 10:27:49 DEBUG] transformed H192Md.SPC -> H192MD.SPC
[sigmove 10:27:49 DEBUG] transformed H192Me.SPC -> H192ME.SPC
[sigmove 10:27:49 DEBUG] transformed H192Mf.SPC -> H192MF.SPC
[Status 10:27:49 INFO] data for H192 transferred to science data processing
[Tidy 10:27:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:27:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:27:49 INFO] resetting WatchDogTimer
[Status 10:27:50 INFO] Starting Set [AERI set: name S192, 6 scans, 0 angle, D16300 command]
[Ingest 10:27:50 INFO] Sending XML status message
[Status 10:27:50 INFO] Mirror angle: 0
[Mirror 10:27:50 INFO] rotating to position S
[Status 10:27:51 INFO] .SET file for ACQ96 ready
[Ingest 10:27:51 INFO] Starting acquisition
[Status 10:27:51 INFO] reading housekeeping
[Status 10:28:09 INFO] acquire complete
[Status 10:28:10 INFO] writing housekeeping
[Sequencer 10:28:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:28:10 INFO] incremented S scene to 192 completed views
[Sequencer 10:28:10 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:28:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:28:10 INFO] incremented to [AERI set: name T192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:28:10 INFO] S192.SIG(18)
[sigmove 10:28:10 DEBUG] transformed S192Ma.SPC -> S192MA.SPC
[sigmove 10:28:10 DEBUG] transformed S192Mb.SPC -> S192MB.SPC
[sigmove 10:28:10 DEBUG] transformed S192Mc.SPC -> S192MC.SPC
[sigmove 10:28:10 DEBUG] transformed S192Md.SPC -> S192MD.SPC
[sigmove 10:28:10 DEBUG] transformed S192Me.SPC -> S192ME.SPC
[sigmove 10:28:10 DEBUG] transformed S192Mf.SPC -> S192MF.SPC
[Status 10:28:10 INFO] data for S192 transferred to science data processing
[Tidy 10:28:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:28:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:28:10 INFO] resetting WatchDogTimer
[Status 10:28:10 INFO] Starting Set [AERI set: name T192, 6 scans, 0 angle, D16300 command]
[Ingest 10:28:10 INFO] Sending XML status message
[Status 10:28:10 INFO] Mirror angle: 0
[Mirror 10:28:10 INFO] rotating to position T
[Status 10:28:11 INFO] .SET file for ACQ96 ready
[Ingest 10:28:11 INFO] Starting acquisition
[Status 10:28:11 INFO] reading housekeeping
[Status 10:28:29 INFO] acquire complete
[Status 10:28:30 INFO] writing housekeeping
[Sequencer 10:28:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:28:30 INFO] incremented T scene to 192 completed views
[Sequencer 10:28:30 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:28:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:28:30 INFO] incremented to [AERI set: name U192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:28:30 INFO] T192.SIG(18)
[sigmove 10:28:30 DEBUG] transformed T192Ma.SPC -> T192MA.SPC
[sigmove 10:28:30 DEBUG] transformed T192Mb.SPC -> T192MB.SPC
[sigmove 10:28:30 DEBUG] transformed T192Mc.SPC -> T192MC.SPC
[sigmove 10:28:30 DEBUG] transformed T192Md.SPC -> T192MD.SPC
[sigmove 10:28:30 DEBUG] transformed T192Me.SPC -> T192ME.SPC
[sigmove 10:28:30 DEBUG] transformed T192Mf.SPC -> T192MF.SPC
[Status 10:28:30 INFO] data for T192 transferred to science data processing
[Tidy 10:28:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:28:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:28:30 INFO] resetting WatchDogTimer
[Status 10:28:30 INFO] Starting Set [AERI set: name U192, 6 scans, 0 angle, D16300 command]
[Ingest 10:28:30 INFO] Sending XML status message
[Status 10:28:30 INFO] Mirror angle: 0
[Mirror 10:28:30 INFO] rotating to position U
[Status 10:28:31 INFO] .SET file for ACQ96 ready
[Ingest 10:28:31 INFO] Starting acquisition
[Status 10:28:31 INFO] reading housekeeping
[Status 10:28:49 INFO] acquire complete
[Status 10:28:50 INFO] writing housekeeping
[Sequencer 10:28:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:28:50 INFO] incremented U scene to 192 completed views
[Sequencer 10:28:50 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:28:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:28:50 INFO] incremented to [AERI set: name V192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:28:50 INFO] U192.SIG(18)
[sigmove 10:28:50 DEBUG] transformed U192Ma.SPC -> U192MA.SPC
[sigmove 10:28:50 DEBUG] transformed U192Mb.SPC -> U192MB.SPC
[sigmove 10:28:50 DEBUG] transformed U192Mc.SPC -> U192MC.SPC
[sigmove 10:28:50 DEBUG] transformed U192Md.SPC -> U192MD.SPC
[sigmove 10:28:50 DEBUG] transformed U192Me.SPC -> U192ME.SPC
[sigmove 10:28:50 DEBUG] transformed U192Mf.SPC -> U192MF.SPC
[Status 10:28:50 INFO] data for U192 transferred to science data processing
[Tidy 10:28:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:28:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:28:50 INFO] resetting WatchDogTimer
[Status 10:28:50 INFO] Starting Set [AERI set: name V192, 6 scans, 0 angle, D16300 command]
[Ingest 10:28:50 INFO] Sending XML status message
[Status 10:28:50 INFO] Mirror angle: 0
[Mirror 10:28:51 INFO] rotating to position V
[Status 10:28:51 INFO] .SET file for ACQ96 ready
[Ingest 10:28:51 INFO] Starting acquisition
[Status 10:28:51 INFO] reading housekeeping
[Status 10:29:09 INFO] acquire complete
[Status 10:29:10 INFO] writing housekeeping
[Sequencer 10:29:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:29:10 INFO] incremented V scene to 192 completed views
[Sequencer 10:29:10 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:29:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:29:10 INFO] incremented to [AERI set: name W192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:29:10 INFO] V192.SIG(18)
[sigmove 10:29:10 DEBUG] transformed V192Ma.SPC -> V192MA.SPC
[sigmove 10:29:10 DEBUG] transformed V192Mb.SPC -> V192MB.SPC
[sigmove 10:29:10 DEBUG] transformed V192Mc.SPC -> V192MC.SPC
[sigmove 10:29:10 DEBUG] transformed V192Md.SPC -> V192MD.SPC
[sigmove 10:29:10 DEBUG] transformed V192Me.SPC -> V192ME.SPC
[sigmove 10:29:10 DEBUG] transformed V192Mf.SPC -> V192MF.SPC
[Status 10:29:10 INFO] data for V192 transferred to science data processing
[Tidy 10:29:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:29:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:29:10 INFO] resetting WatchDogTimer
[Status 10:29:10 INFO] Starting Set [AERI set: name W192, 6 scans, 0 angle, D16300 command]
[Ingest 10:29:10 INFO] Sending XML status message
[Status 10:29:10 INFO] Mirror angle: 0
[Mirror 10:29:11 INFO] rotating to position W
[Status 10:29:11 INFO] .SET file for ACQ96 ready
[Ingest 10:29:11 INFO] Starting acquisition
[Status 10:29:12 INFO] reading housekeeping
[Status 10:29:30 INFO] acquire complete
[Status 10:29:30 INFO] writing housekeeping
[Sequencer 10:29:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:29:30 INFO] incremented W scene to 192 completed views
[Sequencer 10:29:30 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:29:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:29:30 INFO] incremented to [AERI set: name X192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:29:30 INFO] W192.SIG(18)
[sigmove 10:29:30 DEBUG] transformed W192Ma.SPC -> W192MA.SPC
[sigmove 10:29:30 DEBUG] transformed W192Mb.SPC -> W192MB.SPC
[sigmove 10:29:30 DEBUG] transformed W192Mc.SPC -> W192MC.SPC
[sigmove 10:29:30 DEBUG] transformed W192Md.SPC -> W192MD.SPC
[sigmove 10:29:30 DEBUG] transformed W192Me.SPC -> W192ME.SPC
[sigmove 10:29:30 DEBUG] transformed W192Mf.SPC -> W192MF.SPC
[Status 10:29:30 INFO] data for W192 transferred to science data processing
[Tidy 10:29:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:29:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:29:30 INFO] resetting WatchDogTimer
[Status 10:29:31 INFO] Starting Set [AERI set: name X192, 6 scans, 0 angle, D16300 command]
[Ingest 10:29:31 INFO] Sending XML status message
[Status 10:29:31 INFO] Mirror angle: 0
[Mirror 10:29:31 INFO] rotating to position X
[Status 10:29:31 INFO] .SET file for ACQ96 ready
[Ingest 10:29:32 INFO] Starting acquisition
[Status 10:29:32 INFO] reading housekeeping
[Status 10:29:50 INFO] acquire complete
[Status 10:29:51 INFO] writing housekeeping
[Sequencer 10:29:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:29:51 INFO] incremented X scene to 192 completed views
[Sequencer 10:29:51 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:29:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:29:51 INFO] incremented to [AERI set: name Y192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:29:51 INFO] X192.SIG(18)
[sigmove 10:29:51 DEBUG] transformed X192Ma.SPC -> X192MA.SPC
[sigmove 10:29:51 DEBUG] transformed X192Mb.SPC -> X192MB.SPC
[sigmove 10:29:51 DEBUG] transformed X192Mc.SPC -> X192MC.SPC
[sigmove 10:29:51 DEBUG] transformed X192Md.SPC -> X192MD.SPC
[sigmove 10:29:51 DEBUG] transformed X192Me.SPC -> X192ME.SPC
[sigmove 10:29:51 DEBUG] transformed X192Mf.SPC -> X192MF.SPC
[Status 10:29:51 INFO] data for X192 transferred to science data processing
[Tidy 10:29:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:29:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:29:51 INFO] resetting WatchDogTimer
[Status 10:29:51 INFO] Starting Set [AERI set: name Y192, 6 scans, 0 angle, D16300 command]
[Ingest 10:29:51 INFO] Sending XML status message
[Status 10:29:51 INFO] Mirror angle: 0
[Mirror 10:29:51 INFO] rotating to position Y
[Status 10:29:51 INFO] .SET file for ACQ96 ready
[Ingest 10:29:52 INFO] Starting acquisition
[Status 10:29:52 INFO] reading housekeeping
[Status 10:30:10 INFO] acquire complete
[Status 10:30:11 INFO] writing housekeeping
[Sequencer 10:30:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:30:11 INFO] incremented Y scene to 192 completed views
[Sequencer 10:30:11 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:30:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:30:11 INFO] incremented to [AERI set: name Z192, 6 scans, 0 angle, D16300 command] set
[sigmove 10:30:11 INFO] Y192.SIG(18)
[sigmove 10:30:11 DEBUG] transformed Y192Ma.SPC -> Y192MA.SPC
[sigmove 10:30:11 DEBUG] transformed Y192Mb.SPC -> Y192MB.SPC
[sigmove 10:30:11 DEBUG] transformed Y192Mc.SPC -> Y192MC.SPC
[sigmove 10:30:11 DEBUG] transformed Y192Md.SPC -> Y192MD.SPC
[sigmove 10:30:11 DEBUG] transformed Y192Me.SPC -> Y192ME.SPC
[sigmove 10:30:11 DEBUG] transformed Y192Mf.SPC -> Y192MF.SPC
[Status 10:30:11 INFO] data for Y192 transferred to science data processing
[Tidy 10:30:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:30:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:30:11 INFO] resetting WatchDogTimer
[Status 10:30:11 INFO] Starting Set [AERI set: name Z192, 6 scans, 0 angle, D16300 command]
[Ingest 10:30:11 INFO] Sending XML status message
[Status 10:30:11 INFO] Mirror angle: 0
[Mirror 10:30:11 INFO] rotating to position Z
[Status 10:30:12 INFO] .SET file for ACQ96 ready
[Ingest 10:30:12 INFO] Starting acquisition
[Status 10:30:12 INFO] reading housekeeping
[Status 10:30:30 INFO] acquire complete
[Status 10:30:31 INFO] writing housekeeping
[Sequencer 10:30:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:30:31 INFO] incremented Z scene to 192 completed views
[Sequencer 10:30:31 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:30:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:30:31 INFO] incremented to [AERI set: name H193, 6 scans, 60 angle, D22500 command] set
[sigmove 10:30:31 INFO] Z192.SIG(18)
[sigmove 10:30:31 DEBUG] transformed Z192Ma.SPC -> Z192MA.SPC
[sigmove 10:30:31 DEBUG] transformed Z192Mb.SPC -> Z192MB.SPC
[sigmove 10:30:31 DEBUG] transformed Z192Mc.SPC -> Z192MC.SPC
[sigmove 10:30:31 DEBUG] transformed Z192Md.SPC -> Z192MD.SPC
[sigmove 10:30:31 DEBUG] transformed Z192Me.SPC -> Z192ME.SPC
[sigmove 10:30:31 DEBUG] transformed Z192Mf.SPC -> Z192MF.SPC
[Status 10:30:31 INFO] data for Z192 transferred to science data processing
[Tidy 10:30:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:30:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:30:31 INFO] resetting WatchDogTimer
[Status 10:30:31 INFO] Starting Set [AERI set: name H193, 6 scans, 60 angle, D22500 command]
[Ingest 10:30:31 INFO] Sending XML status message
[Status 10:30:31 INFO] Mirror angle: 60
[Mirror 10:30:31 INFO] rotating to position H
[Status 10:30:32 INFO] .SET file for ACQ96 ready
[Ingest 10:30:33 INFO] Starting acquisition
[Status 10:30:33 INFO] reading housekeeping
[Status 10:30:50 INFO] acquire complete
[Status 10:30:51 INFO] writing housekeeping
[Sequencer 10:30:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:30:51 INFO] incremented H scene to 193 completed views
[Sequencer 10:30:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:30:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:30:51 INFO] incremented to [AERI set: name A193, 6 scans, 120 angle, D28300 command] set
[sigmove 10:30:51 INFO] H193.SIG(18)
[sigmove 10:30:51 DEBUG] transformed H193Ma.SPC -> H193MA.SPC
[sigmove 10:30:51 DEBUG] transformed H193Mb.SPC -> H193MB.SPC
[sigmove 10:30:51 DEBUG] transformed H193Mc.SPC -> H193MC.SPC
[sigmove 10:30:51 DEBUG] transformed H193Md.SPC -> H193MD.SPC
[sigmove 10:30:51 DEBUG] transformed H193Me.SPC -> H193ME.SPC
[sigmove 10:30:51 DEBUG] transformed H193Mf.SPC -> H193MF.SPC
[Status 10:30:51 INFO] data for H193 transferred to science data processing
[Tidy 10:30:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:30:51 INFO] A191.FIN(19),H191.FIN(19),S191.FIN(19),T191.FIN(19),U191.FIN(19),V191.FIN(19),W191.FIN(19),X191.FIN(19),Y191.FIN(19),Z191.FIN(19),A192.FIN(19),H192.FIN(19),S192.FIN(19),T192.FIN(19),U192.FIN(19),V192.FIN(19),W192.FIN(19),X192.FIN(19),Y192.FIN(19),Z192.FIN(19)
[sigmove 10:30:51 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:30:51 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:30:55 DEBUG] done zipping
[WatchDog 10:30:55 INFO] resetting WatchDogTimer
[Status 10:30:55 INFO] Starting Set [AERI set: name A193, 6 scans, 120 angle, D28300 command]
[Ingest 10:30:55 INFO] Sending XML status message
[Status 10:30:55 INFO] Mirror angle: 120
[Mirror 10:30:55 INFO] rotating to position A
[Status 10:30:56 INFO] .SET file for ACQ96 ready
[Ingest 10:30:57 INFO] Starting acquisition
[Status 10:30:57 INFO] reading housekeeping
[Status 10:31:15 INFO] acquire complete
[Status 10:31:16 INFO] writing housekeeping
[Sequencer 10:31:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:31:16 INFO] incremented A scene to 193 completed views
[Sequencer 10:31:16 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:31:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:31:16 INFO] incremented to [AERI set: name S193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:31:16 INFO] A193.SIG(18)
[sigmove 10:31:16 DEBUG] transformed A193Ma.SPC -> A193MA.SPC
[sigmove 10:31:16 DEBUG] transformed A193Mb.SPC -> A193MB.SPC
[sigmove 10:31:16 DEBUG] transformed A193Mc.SPC -> A193MC.SPC
[sigmove 10:31:16 DEBUG] transformed A193Md.SPC -> A193MD.SPC
[sigmove 10:31:16 DEBUG] transformed A193Me.SPC -> A193ME.SPC
[sigmove 10:31:16 DEBUG] transformed A193Mf.SPC -> A193MF.SPC
[Status 10:31:16 INFO] data for A193 transferred to science data processing
[Tidy 10:31:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:31:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:31:16 INFO] resetting WatchDogTimer
[Status 10:31:16 INFO] Starting Set [AERI set: name S193, 6 scans, 0 angle, D16300 command]
[Ingest 10:31:16 INFO] Sending XML status message
[Status 10:31:16 INFO] Mirror angle: 0
[Mirror 10:31:16 INFO] rotating to position S
[Status 10:31:18 INFO] .SET file for ACQ96 ready
[Ingest 10:31:18 INFO] Starting acquisition
[Status 10:31:18 INFO] reading housekeeping
[Status 10:31:36 INFO] acquire complete
[Status 10:31:37 INFO] writing housekeeping
[Sequencer 10:31:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:31:37 INFO] incremented S scene to 193 completed views
[Sequencer 10:31:37 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:31:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:31:37 INFO] incremented to [AERI set: name T193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:31:37 INFO] S193.SIG(18)
[sigmove 10:31:37 DEBUG] transformed S193Ma.SPC -> S193MA.SPC
[sigmove 10:31:37 DEBUG] transformed S193Mb.SPC -> S193MB.SPC
[sigmove 10:31:37 DEBUG] transformed S193Mc.SPC -> S193MC.SPC
[sigmove 10:31:37 DEBUG] transformed S193Md.SPC -> S193MD.SPC
[sigmove 10:31:37 DEBUG] transformed S193Me.SPC -> S193ME.SPC
[sigmove 10:31:37 DEBUG] transformed S193Mf.SPC -> S193MF.SPC
[Status 10:31:37 INFO] data for S193 transferred to science data processing
[Tidy 10:31:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:31:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:31:37 INFO] resetting WatchDogTimer
[Status 10:31:37 INFO] Starting Set [AERI set: name T193, 6 scans, 0 angle, D16300 command]
[Ingest 10:31:37 INFO] Sending XML status message
[Status 10:31:37 INFO] Mirror angle: 0
[Mirror 10:31:38 INFO] rotating to position T
[Status 10:31:38 INFO] .SET file for ACQ96 ready
[Ingest 10:31:38 INFO] Starting acquisition
[Status 10:31:39 INFO] reading housekeeping
[Status 10:31:57 INFO] acquire complete
[Status 10:31:57 INFO] writing housekeeping
[Sequencer 10:31:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:31:57 INFO] incremented T scene to 193 completed views
[Sequencer 10:31:57 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:31:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:31:57 INFO] incremented to [AERI set: name U193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:31:57 INFO] T193.SIG(18)
[sigmove 10:31:57 DEBUG] transformed T193Ma.SPC -> T193MA.SPC
[sigmove 10:31:57 DEBUG] transformed T193Mb.SPC -> T193MB.SPC
[sigmove 10:31:57 DEBUG] transformed T193Mc.SPC -> T193MC.SPC
[sigmove 10:31:57 DEBUG] transformed T193Md.SPC -> T193MD.SPC
[sigmove 10:31:57 DEBUG] transformed T193Me.SPC -> T193ME.SPC
[sigmove 10:31:57 DEBUG] transformed T193Mf.SPC -> T193MF.SPC
[Status 10:31:57 INFO] data for T193 transferred to science data processing
[Tidy 10:31:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:31:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:31:57 INFO] resetting WatchDogTimer
[Status 10:31:58 INFO] Starting Set [AERI set: name U193, 6 scans, 0 angle, D16300 command]
[Ingest 10:31:58 INFO] Sending XML status message
[Status 10:31:58 INFO] Mirror angle: 0
[Mirror 10:31:58 INFO] rotating to position U
[Status 10:31:59 INFO] .SET file for ACQ96 ready
[Ingest 10:31:59 INFO] Starting acquisition
[Status 10:31:59 INFO] reading housekeeping
[Status 10:32:17 INFO] acquire complete
[Status 10:32:18 INFO] writing housekeeping
[Sequencer 10:32:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:32:18 INFO] incremented U scene to 193 completed views
[Sequencer 10:32:18 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:32:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:32:18 INFO] incremented to [AERI set: name V193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:32:18 INFO] U193.SIG(18)
[sigmove 10:32:18 DEBUG] transformed U193Ma.SPC -> U193MA.SPC
[sigmove 10:32:18 DEBUG] transformed U193Mb.SPC -> U193MB.SPC
[sigmove 10:32:18 DEBUG] transformed U193Mc.SPC -> U193MC.SPC
[sigmove 10:32:18 DEBUG] transformed U193Md.SPC -> U193MD.SPC
[sigmove 10:32:18 DEBUG] transformed U193Me.SPC -> U193ME.SPC
[sigmove 10:32:18 DEBUG] transformed U193Mf.SPC -> U193MF.SPC
[Status 10:32:18 INFO] data for U193 transferred to science data processing
[Tidy 10:32:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:32:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:32:18 INFO] resetting WatchDogTimer
[Status 10:32:18 INFO] Starting Set [AERI set: name V193, 6 scans, 0 angle, D16300 command]
[Ingest 10:32:18 INFO] Sending XML status message
[Status 10:32:18 INFO] Mirror angle: 0
[Mirror 10:32:18 INFO] rotating to position V
[Status 10:32:19 INFO] .SET file for ACQ96 ready
[Ingest 10:32:19 INFO] Starting acquisition
[Status 10:32:19 INFO] reading housekeeping
[Status 10:32:37 INFO] acquire complete
[Status 10:32:38 INFO] writing housekeeping
[Sequencer 10:32:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:32:38 INFO] incremented V scene to 193 completed views
[Sequencer 10:32:38 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:32:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:32:38 INFO] incremented to [AERI set: name W193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:32:38 INFO] V193.SIG(18)
[sigmove 10:32:38 DEBUG] transformed V193Ma.SPC -> V193MA.SPC
[sigmove 10:32:38 DEBUG] transformed V193Mb.SPC -> V193MB.SPC
[sigmove 10:32:38 DEBUG] transformed V193Mc.SPC -> V193MC.SPC
[sigmove 10:32:38 DEBUG] transformed V193Md.SPC -> V193MD.SPC
[sigmove 10:32:38 DEBUG] transformed V193Me.SPC -> V193ME.SPC
[sigmove 10:32:38 DEBUG] transformed V193Mf.SPC -> V193MF.SPC
[Status 10:32:38 INFO] data for V193 transferred to science data processing
[Tidy 10:32:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:32:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:32:38 INFO] resetting WatchDogTimer
[Status 10:32:38 INFO] Starting Set [AERI set: name W193, 6 scans, 0 angle, D16300 command]
[Ingest 10:32:38 INFO] Sending XML status message
[Status 10:32:38 INFO] Mirror angle: 0
[Mirror 10:32:38 INFO] rotating to position W
[Status 10:32:39 INFO] .SET file for ACQ96 ready
[Ingest 10:32:39 INFO] Starting acquisition
[Status 10:32:39 INFO] reading housekeeping
[Status 10:32:57 INFO] acquire complete
[Status 10:32:58 INFO] writing housekeeping
[Sequencer 10:32:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:32:58 INFO] incremented W scene to 193 completed views
[Sequencer 10:32:58 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:32:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:32:58 INFO] incremented to [AERI set: name X193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:32:58 INFO] W193.SIG(18)
[sigmove 10:32:58 DEBUG] transformed W193Ma.SPC -> W193MA.SPC
[sigmove 10:32:58 DEBUG] transformed W193Mb.SPC -> W193MB.SPC
[sigmove 10:32:58 DEBUG] transformed W193Mc.SPC -> W193MC.SPC
[sigmove 10:32:58 DEBUG] transformed W193Md.SPC -> W193MD.SPC
[sigmove 10:32:58 DEBUG] transformed W193Me.SPC -> W193ME.SPC
[sigmove 10:32:58 DEBUG] transformed W193Mf.SPC -> W193MF.SPC
[Status 10:32:58 INFO] data for W193 transferred to science data processing
[Tidy 10:32:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:32:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:32:58 INFO] resetting WatchDogTimer
[Status 10:32:58 INFO] Starting Set [AERI set: name X193, 6 scans, 0 angle, D16300 command]
[Ingest 10:32:58 INFO] Sending XML status message
[Status 10:32:58 INFO] Mirror angle: 0
[Mirror 10:32:58 INFO] rotating to position X
[Status 10:32:59 INFO] .SET file for ACQ96 ready
[Ingest 10:32:59 INFO] Starting acquisition
[Status 10:32:59 INFO] reading housekeeping
[Status 10:33:17 INFO] acquire complete
[Status 10:33:18 INFO] writing housekeeping
[Sequencer 10:33:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:33:18 INFO] incremented X scene to 193 completed views
[Sequencer 10:33:18 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:33:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:33:18 INFO] incremented to [AERI set: name Y193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:33:18 INFO] X193.SIG(18)
[sigmove 10:33:18 DEBUG] transformed X193Ma.SPC -> X193MA.SPC
[sigmove 10:33:18 DEBUG] transformed X193Mb.SPC -> X193MB.SPC
[sigmove 10:33:18 DEBUG] transformed X193Mc.SPC -> X193MC.SPC
[sigmove 10:33:18 DEBUG] transformed X193Md.SPC -> X193MD.SPC
[sigmove 10:33:18 DEBUG] transformed X193Me.SPC -> X193ME.SPC
[sigmove 10:33:18 DEBUG] transformed X193Mf.SPC -> X193MF.SPC
[Status 10:33:18 INFO] data for X193 transferred to science data processing
[Tidy 10:33:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:33:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:33:18 INFO] resetting WatchDogTimer
[Status 10:33:18 INFO] Starting Set [AERI set: name Y193, 6 scans, 0 angle, D16300 command]
[Ingest 10:33:18 INFO] Sending XML status message
[Status 10:33:18 INFO] Mirror angle: 0
[Mirror 10:33:19 INFO] rotating to position Y
[Status 10:33:19 INFO] .SET file for ACQ96 ready
[Ingest 10:33:19 INFO] Starting acquisition
[Status 10:33:20 INFO] reading housekeeping
[Status 10:33:38 INFO] acquire complete
[Status 10:33:38 INFO] writing housekeeping
[Sequencer 10:33:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:33:38 INFO] incremented Y scene to 193 completed views
[Sequencer 10:33:38 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:33:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:33:38 INFO] incremented to [AERI set: name Z193, 6 scans, 0 angle, D16300 command] set
[sigmove 10:33:38 INFO] Y193.SIG(18)
[sigmove 10:33:38 DEBUG] transformed Y193Ma.SPC -> Y193MA.SPC
[sigmove 10:33:38 DEBUG] transformed Y193Mb.SPC -> Y193MB.SPC
[sigmove 10:33:38 DEBUG] transformed Y193Mc.SPC -> Y193MC.SPC
[sigmove 10:33:38 DEBUG] transformed Y193Md.SPC -> Y193MD.SPC
[sigmove 10:33:38 DEBUG] transformed Y193Me.SPC -> Y193ME.SPC
[sigmove 10:33:38 DEBUG] transformed Y193Mf.SPC -> Y193MF.SPC
[Status 10:33:38 INFO] data for Y193 transferred to science data processing
[Tidy 10:33:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:33:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:33:38 INFO] resetting WatchDogTimer
[Status 10:33:39 INFO] Starting Set [AERI set: name Z193, 6 scans, 0 angle, D16300 command]
[Ingest 10:33:39 INFO] Sending XML status message
[Status 10:33:39 INFO] Mirror angle: 0
[Mirror 10:33:39 INFO] rotating to position Z
[Status 10:33:39 INFO] .SET file for ACQ96 ready
[Ingest 10:33:39 INFO] Starting acquisition
[Status 10:33:40 INFO] reading housekeeping
[Status 10:33:58 INFO] acquire complete
[Status 10:33:59 INFO] writing housekeeping
[Sequencer 10:33:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:33:59 INFO] incremented Z scene to 193 completed views
[Sequencer 10:33:59 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:33:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:33:59 INFO] incremented to [AERI set: name A194, 6 scans, 120 angle, D28300 command] set
[sigmove 10:33:59 INFO] Z193.SIG(18)
[sigmove 10:33:59 DEBUG] transformed Z193Ma.SPC -> Z193MA.SPC
[sigmove 10:33:59 DEBUG] transformed Z193Mb.SPC -> Z193MB.SPC
[sigmove 10:33:59 DEBUG] transformed Z193Mc.SPC -> Z193MC.SPC
[sigmove 10:33:59 DEBUG] transformed Z193Md.SPC -> Z193MD.SPC
[sigmove 10:33:59 DEBUG] transformed Z193Me.SPC -> Z193ME.SPC
[sigmove 10:33:59 DEBUG] transformed Z193Mf.SPC -> Z193MF.SPC
[Status 10:33:59 INFO] data for Z193 transferred to science data processing
[Tidy 10:33:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:33:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:33:59 INFO] resetting WatchDogTimer
[Status 10:33:59 INFO] Starting Set [AERI set: name A194, 6 scans, 120 angle, D28300 command]
[Ingest 10:33:59 INFO] Sending XML status message
[Status 10:33:59 INFO] Mirror angle: 120
[Mirror 10:33:59 INFO] rotating to position A
[Status 10:34:01 INFO] .SET file for ACQ96 ready
[Ingest 10:34:01 INFO] Starting acquisition
[Status 10:34:01 INFO] reading housekeeping
[Status 10:34:19 INFO] acquire complete
[Status 10:34:20 INFO] writing housekeeping
[Sequencer 10:34:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:34:20 INFO] incremented A scene to 194 completed views
[Sequencer 10:34:20 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:34:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:34:20 INFO] incremented to [AERI set: name H194, 6 scans, 60 angle, D22500 command] set
[sigmove 10:34:20 INFO] A194.SIG(18)
[sigmove 10:34:20 DEBUG] transformed A194Ma.SPC -> A194MA.SPC
[sigmove 10:34:20 DEBUG] transformed A194Mb.SPC -> A194MB.SPC
[sigmove 10:34:20 DEBUG] transformed A194Mc.SPC -> A194MC.SPC
[sigmove 10:34:20 DEBUG] transformed A194Md.SPC -> A194MD.SPC
[sigmove 10:34:20 DEBUG] transformed A194Me.SPC -> A194ME.SPC
[sigmove 10:34:20 DEBUG] transformed A194Mf.SPC -> A194MF.SPC
[Status 10:34:20 INFO] data for A194 transferred to science data processing
[Tidy 10:34:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:34:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:34:20 INFO] resetting WatchDogTimer
[Status 10:34:20 INFO] Starting Set [AERI set: name H194, 6 scans, 60 angle, D22500 command]
[Ingest 10:34:20 INFO] Sending XML status message
[Status 10:34:20 INFO] Mirror angle: 60
[Mirror 10:34:20 INFO] rotating to position H
[Status 10:34:21 INFO] .SET file for ACQ96 ready
[Ingest 10:34:22 INFO] Starting acquisition
[Status 10:34:22 INFO] reading housekeeping
[Status 10:34:39 INFO] acquire complete
[Status 10:34:40 INFO] writing housekeeping
[Sequencer 10:34:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:34:40 INFO] incremented H scene to 194 completed views
[Sequencer 10:34:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:34:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:34:40 INFO] incremented to [AERI set: name S194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:34:40 INFO] H194.SIG(18)
[sigmove 10:34:40 DEBUG] transformed H194Ma.SPC -> H194MA.SPC
[sigmove 10:34:40 DEBUG] transformed H194Mb.SPC -> H194MB.SPC
[sigmove 10:34:40 DEBUG] transformed H194Mc.SPC -> H194MC.SPC
[sigmove 10:34:40 DEBUG] transformed H194Md.SPC -> H194MD.SPC
[sigmove 10:34:40 DEBUG] transformed H194Me.SPC -> H194ME.SPC
[sigmove 10:34:40 DEBUG] transformed H194Mf.SPC -> H194MF.SPC
[Status 10:34:40 INFO] data for H194 transferred to science data processing
[Tidy 10:34:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:34:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:34:40 INFO] resetting WatchDogTimer
[Status 10:34:40 INFO] Starting Set [AERI set: name S194, 6 scans, 0 angle, D16300 command]
[Ingest 10:34:40 INFO] Sending XML status message
[Status 10:34:40 INFO] Mirror angle: 0
[Mirror 10:34:41 INFO] rotating to position S
[Status 10:34:41 INFO] .SET file for ACQ96 ready
[Ingest 10:34:42 INFO] Starting acquisition
[Status 10:34:42 INFO] reading housekeeping
[Status 10:35:04 INFO] acquire complete
[Status 10:35:05 INFO] writing housekeeping
[Sequencer 10:35:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:35:05 INFO] incremented S scene to 194 completed views
[Sequencer 10:35:05 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:35:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:35:05 INFO] incremented to [AERI set: name T194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:35:05 INFO] S194.SIG(18)
[sigmove 10:35:05 DEBUG] transformed S194Ma.SPC -> S194MA.SPC
[sigmove 10:35:05 DEBUG] transformed S194Mb.SPC -> S194MB.SPC
[sigmove 10:35:05 DEBUG] transformed S194Mc.SPC -> S194MC.SPC
[sigmove 10:35:05 DEBUG] transformed S194Md.SPC -> S194MD.SPC
[sigmove 10:35:05 DEBUG] transformed S194Me.SPC -> S194ME.SPC
[sigmove 10:35:05 DEBUG] transformed S194Mf.SPC -> S194MF.SPC
[Status 10:35:05 INFO] data for S194 transferred to science data processing
[Tidy 10:35:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:35:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:35:05 INFO] resetting WatchDogTimer
[Status 10:35:05 INFO] Starting Set [AERI set: name T194, 6 scans, 0 angle, D16300 command]
[Ingest 10:35:05 INFO] Sending XML status message
[Status 10:35:05 INFO] Mirror angle: 0
[Mirror 10:35:05 INFO] rotating to position T
[Status 10:35:06 INFO] .SET file for ACQ96 ready
[Ingest 10:35:06 INFO] Starting acquisition
[Status 10:35:06 INFO] reading housekeeping
[Status 10:35:24 INFO] acquire complete
[Status 10:35:25 INFO] writing housekeeping
[Sequencer 10:35:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:35:25 INFO] incremented T scene to 194 completed views
[Sequencer 10:35:25 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:35:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:35:25 INFO] incremented to [AERI set: name U194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:35:25 INFO] T194.SIG(18)
[sigmove 10:35:25 DEBUG] transformed T194Ma.SPC -> T194MA.SPC
[sigmove 10:35:25 DEBUG] transformed T194Mb.SPC -> T194MB.SPC
[sigmove 10:35:25 DEBUG] transformed T194Mc.SPC -> T194MC.SPC
[sigmove 10:35:25 DEBUG] transformed T194Md.SPC -> T194MD.SPC
[sigmove 10:35:25 DEBUG] transformed T194Me.SPC -> T194ME.SPC
[sigmove 10:35:25 DEBUG] transformed T194Mf.SPC -> T194MF.SPC
[Status 10:35:25 INFO] data for T194 transferred to science data processing
[Tidy 10:35:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:35:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:35:25 INFO] resetting WatchDogTimer
[Status 10:35:25 INFO] Starting Set [AERI set: name U194, 6 scans, 0 angle, D16300 command]
[Ingest 10:35:25 INFO] Sending XML status message
[Status 10:35:25 INFO] Mirror angle: 0
[Mirror 10:35:25 INFO] rotating to position U
[Status 10:35:26 INFO] .SET file for ACQ96 ready
[Ingest 10:35:26 INFO] Starting acquisition
[Status 10:35:26 INFO] reading housekeeping
[Status 10:35:44 INFO] acquire complete
[Status 10:35:45 INFO] writing housekeeping
[Sequencer 10:35:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:35:45 INFO] incremented U scene to 194 completed views
[Sequencer 10:35:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:35:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:35:45 INFO] incremented to [AERI set: name V194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:35:45 INFO] U194.SIG(18)
[sigmove 10:35:45 DEBUG] transformed U194Ma.SPC -> U194MA.SPC
[sigmove 10:35:45 DEBUG] transformed U194Mb.SPC -> U194MB.SPC
[sigmove 10:35:45 DEBUG] transformed U194Mc.SPC -> U194MC.SPC
[sigmove 10:35:45 DEBUG] transformed U194Md.SPC -> U194MD.SPC
[sigmove 10:35:45 DEBUG] transformed U194Me.SPC -> U194ME.SPC
[sigmove 10:35:45 DEBUG] transformed U194Mf.SPC -> U194MF.SPC
[Status 10:35:45 INFO] data for U194 transferred to science data processing
[Tidy 10:35:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:35:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:35:45 INFO] resetting WatchDogTimer
[Status 10:35:45 INFO] Starting Set [AERI set: name V194, 6 scans, 0 angle, D16300 command]
[Ingest 10:35:45 INFO] Sending XML status message
[Status 10:35:45 INFO] Mirror angle: 0
[Mirror 10:35:46 INFO] rotating to position V
[Status 10:35:46 INFO] .SET file for ACQ96 ready
[Ingest 10:35:46 INFO] Starting acquisition
[Status 10:35:46 INFO] reading housekeeping
[Status 10:36:05 INFO] acquire complete
[Status 10:36:05 INFO] writing housekeeping
[Sequencer 10:36:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:36:05 INFO] incremented V scene to 194 completed views
[Sequencer 10:36:05 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:36:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:36:05 INFO] incremented to [AERI set: name W194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:36:05 INFO] V194.SIG(18)
[sigmove 10:36:05 DEBUG] transformed V194Ma.SPC -> V194MA.SPC
[sigmove 10:36:05 DEBUG] transformed V194Mb.SPC -> V194MB.SPC
[sigmove 10:36:05 DEBUG] transformed V194Mc.SPC -> V194MC.SPC
[sigmove 10:36:05 DEBUG] transformed V194Md.SPC -> V194MD.SPC
[sigmove 10:36:05 DEBUG] transformed V194Me.SPC -> V194ME.SPC
[sigmove 10:36:05 DEBUG] transformed V194Mf.SPC -> V194MF.SPC
[Status 10:36:05 INFO] data for V194 transferred to science data processing
[Tidy 10:36:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:36:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:36:05 INFO] resetting WatchDogTimer
[Status 10:36:06 INFO] Starting Set [AERI set: name W194, 6 scans, 0 angle, D16300 command]
[Ingest 10:36:06 INFO] Sending XML status message
[Status 10:36:06 INFO] Mirror angle: 0
[Mirror 10:36:06 INFO] rotating to position W
[Status 10:36:06 INFO] .SET file for ACQ96 ready
[Ingest 10:36:06 INFO] Starting acquisition
[Status 10:36:07 INFO] reading housekeeping
[Status 10:36:25 INFO] acquire complete
[Status 10:36:25 INFO] writing housekeeping
[Sequencer 10:36:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:36:25 INFO] incremented W scene to 194 completed views
[Sequencer 10:36:25 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:36:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:36:26 INFO] incremented to [AERI set: name X194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:36:26 INFO] W194.SIG(18)
[sigmove 10:36:26 DEBUG] transformed W194Ma.SPC -> W194MA.SPC
[sigmove 10:36:26 DEBUG] transformed W194Mb.SPC -> W194MB.SPC
[sigmove 10:36:26 DEBUG] transformed W194Mc.SPC -> W194MC.SPC
[sigmove 10:36:26 DEBUG] transformed W194Md.SPC -> W194MD.SPC
[sigmove 10:36:26 DEBUG] transformed W194Me.SPC -> W194ME.SPC
[sigmove 10:36:26 DEBUG] transformed W194Mf.SPC -> W194MF.SPC
[Status 10:36:26 INFO] data for W194 transferred to science data processing
[Tidy 10:36:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:36:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:36:26 INFO] resetting WatchDogTimer
[Status 10:36:26 INFO] Starting Set [AERI set: name X194, 6 scans, 0 angle, D16300 command]
[Ingest 10:36:26 INFO] Sending XML status message
[Status 10:36:26 INFO] Mirror angle: 0
[Mirror 10:36:26 INFO] rotating to position X
[Status 10:36:26 INFO] .SET file for ACQ96 ready
[Ingest 10:36:27 INFO] Starting acquisition
[Status 10:36:27 INFO] reading housekeeping
[Status 10:36:45 INFO] acquire complete
[Status 10:36:46 INFO] writing housekeeping
[Sequencer 10:36:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:36:46 INFO] incremented X scene to 194 completed views
[Sequencer 10:36:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:36:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:36:46 INFO] incremented to [AERI set: name Y194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:36:46 INFO] X194.SIG(18)
[sigmove 10:36:46 DEBUG] transformed X194Ma.SPC -> X194MA.SPC
[sigmove 10:36:46 DEBUG] transformed X194Mb.SPC -> X194MB.SPC
[sigmove 10:36:46 DEBUG] transformed X194Mc.SPC -> X194MC.SPC
[sigmove 10:36:46 DEBUG] transformed X194Md.SPC -> X194MD.SPC
[sigmove 10:36:46 DEBUG] transformed X194Me.SPC -> X194ME.SPC
[sigmove 10:36:46 DEBUG] transformed X194Mf.SPC -> X194MF.SPC
[Status 10:36:46 INFO] data for X194 transferred to science data processing
[Tidy 10:36:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:36:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:36:46 INFO] resetting WatchDogTimer
[Status 10:36:46 INFO] Starting Set [AERI set: name Y194, 6 scans, 0 angle, D16300 command]
[Ingest 10:36:46 INFO] Sending XML status message
[Status 10:36:46 INFO] Mirror angle: 0
[Mirror 10:36:46 INFO] rotating to position Y
[Status 10:36:47 INFO] .SET file for ACQ96 ready
[Ingest 10:36:47 INFO] Starting acquisition
[Status 10:36:47 INFO] reading housekeeping
[Status 10:37:05 INFO] acquire complete
[Status 10:37:06 INFO] writing housekeeping
[Sequencer 10:37:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:37:06 INFO] incremented Y scene to 194 completed views
[Sequencer 10:37:06 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:37:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:37:06 INFO] incremented to [AERI set: name Z194, 6 scans, 0 angle, D16300 command] set
[sigmove 10:37:06 INFO] Y194.SIG(18)
[sigmove 10:37:06 DEBUG] transformed Y194Ma.SPC -> Y194MA.SPC
[sigmove 10:37:06 DEBUG] transformed Y194Mb.SPC -> Y194MB.SPC
[sigmove 10:37:06 DEBUG] transformed Y194Mc.SPC -> Y194MC.SPC
[sigmove 10:37:06 DEBUG] transformed Y194Md.SPC -> Y194MD.SPC
[sigmove 10:37:06 DEBUG] transformed Y194Me.SPC -> Y194ME.SPC
[sigmove 10:37:06 DEBUG] transformed Y194Mf.SPC -> Y194MF.SPC
[Status 10:37:06 INFO] data for Y194 transferred to science data processing
[Tidy 10:37:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:37:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:37:06 INFO] resetting WatchDogTimer
[Status 10:37:06 INFO] Starting Set [AERI set: name Z194, 6 scans, 0 angle, D16300 command]
[Ingest 10:37:06 INFO] Sending XML status message
[Status 10:37:06 INFO] Mirror angle: 0
[Mirror 10:37:06 INFO] rotating to position Z
[Status 10:37:07 INFO] .SET file for ACQ96 ready
[Ingest 10:37:07 INFO] Starting acquisition
[Status 10:37:07 INFO] reading housekeeping
[Status 10:37:25 INFO] acquire complete
[Status 10:37:26 INFO] writing housekeeping
[Sequencer 10:37:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:37:26 INFO] incremented Z scene to 194 completed views
[Sequencer 10:37:26 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:37:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:37:26 INFO] incremented to [AERI set: name H195, 6 scans, 60 angle, D22500 command] set
[sigmove 10:37:26 INFO] Z194.SIG(18)
[sigmove 10:37:26 DEBUG] transformed Z194Ma.SPC -> Z194MA.SPC
[sigmove 10:37:26 DEBUG] transformed Z194Mb.SPC -> Z194MB.SPC
[sigmove 10:37:26 DEBUG] transformed Z194Mc.SPC -> Z194MC.SPC
[sigmove 10:37:26 DEBUG] transformed Z194Md.SPC -> Z194MD.SPC
[sigmove 10:37:26 DEBUG] transformed Z194Me.SPC -> Z194ME.SPC
[sigmove 10:37:26 DEBUG] transformed Z194Mf.SPC -> Z194MF.SPC
[Status 10:37:26 INFO] data for Z194 transferred to science data processing
[Tidy 10:37:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:37:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:37:26 INFO] resetting WatchDogTimer
[Status 10:37:26 INFO] Starting Set [AERI set: name H195, 6 scans, 60 angle, D22500 command]
[Ingest 10:37:26 INFO] Sending XML status message
[Status 10:37:26 INFO] Mirror angle: 60
[Mirror 10:37:27 INFO] rotating to position H
[Status 10:37:28 INFO] .SET file for ACQ96 ready
[Ingest 10:37:28 INFO] Starting acquisition
[Status 10:37:28 INFO] reading housekeeping
[Status 10:37:46 INFO] acquire complete
[Status 10:37:46 INFO] writing housekeeping
[Sequencer 10:37:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:37:46 INFO] incremented H scene to 195 completed views
[Sequencer 10:37:46 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:37:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:37:46 INFO] incremented to [AERI set: name A195, 6 scans, 120 angle, D28300 command] set
[sigmove 10:37:46 INFO] H195.SIG(18)
[sigmove 10:37:46 DEBUG] transformed H195Ma.SPC -> H195MA.SPC
[sigmove 10:37:46 DEBUG] transformed H195Mb.SPC -> H195MB.SPC
[sigmove 10:37:46 DEBUG] transformed H195Mc.SPC -> H195MC.SPC
[sigmove 10:37:46 DEBUG] transformed H195Md.SPC -> H195MD.SPC
[sigmove 10:37:46 DEBUG] transformed H195Me.SPC -> H195ME.SPC
[sigmove 10:37:46 DEBUG] transformed H195Mf.SPC -> H195MF.SPC
[Status 10:37:46 INFO] data for H195 transferred to science data processing
[Tidy 10:37:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:37:46 INFO] A193.FIN(19),H193.FIN(19),S193.FIN(19),T193.FIN(19),U193.FIN(19),V193.FIN(19),W193.FIN(19),X193.FIN(19),Y193.FIN(19),Z193.FIN(19),A194.FIN(19),H194.FIN(19),S194.FIN(19),T194.FIN(19),U194.FIN(19),V194.FIN(19),W194.FIN(19),X194.FIN(19),Y194.FIN(19),Z194.FIN(19)
[sigmove 10:37:46 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:37:46 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:37:50 DEBUG] done zipping
[WatchDog 10:37:50 INFO] resetting WatchDogTimer
[Status 10:37:50 INFO] Starting Set [AERI set: name A195, 6 scans, 120 angle, D28300 command]
[Ingest 10:37:50 INFO] Sending XML status message
[Status 10:37:50 INFO] Mirror angle: 120
[Mirror 10:37:51 INFO] rotating to position A
[Status 10:37:51 INFO] .SET file for ACQ96 ready
[Ingest 10:37:52 INFO] Starting acquisition
[Status 10:37:52 INFO] reading housekeeping
[Status 10:38:10 INFO] acquire complete
[Status 10:38:11 INFO] writing housekeeping
[Sequencer 10:38:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:38:11 INFO] incremented A scene to 195 completed views
[Sequencer 10:38:11 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:38:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:38:11 INFO] incremented to [AERI set: name S195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:38:11 INFO] A195.SIG(18)
[sigmove 10:38:11 DEBUG] transformed A195Ma.SPC -> A195MA.SPC
[sigmove 10:38:11 DEBUG] transformed A195Mb.SPC -> A195MB.SPC
[sigmove 10:38:11 DEBUG] transformed A195Mc.SPC -> A195MC.SPC
[sigmove 10:38:11 DEBUG] transformed A195Md.SPC -> A195MD.SPC
[sigmove 10:38:11 DEBUG] transformed A195Me.SPC -> A195ME.SPC
[sigmove 10:38:11 DEBUG] transformed A195Mf.SPC -> A195MF.SPC
[Status 10:38:11 INFO] data for A195 transferred to science data processing
[Tidy 10:38:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:38:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:38:11 INFO] resetting WatchDogTimer
[Status 10:38:11 INFO] Starting Set [AERI set: name S195, 6 scans, 0 angle, D16300 command]
[Ingest 10:38:11 INFO] Sending XML status message
[Status 10:38:11 INFO] Mirror angle: 0
[Mirror 10:38:11 INFO] rotating to position S
[Status 10:38:13 INFO] .SET file for ACQ96 ready
[Ingest 10:38:13 INFO] Starting acquisition
[Status 10:38:13 INFO] reading housekeeping
[Status 10:38:32 INFO] acquire complete
[Status 10:38:32 INFO] writing housekeeping
[Sequencer 10:38:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:38:32 INFO] incremented S scene to 195 completed views
[Sequencer 10:38:32 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:38:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:38:32 INFO] incremented to [AERI set: name T195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:38:32 INFO] S195.SIG(18)
[sigmove 10:38:32 DEBUG] transformed S195Ma.SPC -> S195MA.SPC
[sigmove 10:38:32 DEBUG] transformed S195Mb.SPC -> S195MB.SPC
[sigmove 10:38:32 DEBUG] transformed S195Mc.SPC -> S195MC.SPC
[sigmove 10:38:32 DEBUG] transformed S195Md.SPC -> S195MD.SPC
[sigmove 10:38:32 DEBUG] transformed S195Me.SPC -> S195ME.SPC
[sigmove 10:38:32 DEBUG] transformed S195Mf.SPC -> S195MF.SPC
[Status 10:38:32 INFO] data for S195 transferred to science data processing
[Tidy 10:38:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:38:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:38:32 INFO] resetting WatchDogTimer
[Status 10:38:33 INFO] Starting Set [AERI set: name T195, 6 scans, 0 angle, D16300 command]
[Ingest 10:38:33 INFO] Sending XML status message
[Status 10:38:33 INFO] Mirror angle: 0
[Mirror 10:38:33 INFO] rotating to position T
[Status 10:38:33 INFO] .SET file for ACQ96 ready
[Ingest 10:38:33 INFO] Starting acquisition
[Status 10:38:34 INFO] reading housekeeping
[Status 10:38:52 INFO] acquire complete
[Status 10:38:52 INFO] writing housekeeping
[Sequencer 10:38:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:38:52 INFO] incremented T scene to 195 completed views
[Sequencer 10:38:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:38:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:38:52 INFO] incremented to [AERI set: name U195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:38:52 INFO] T195.SIG(18)
[sigmove 10:38:52 DEBUG] transformed T195Ma.SPC -> T195MA.SPC
[sigmove 10:38:52 DEBUG] transformed T195Mb.SPC -> T195MB.SPC
[sigmove 10:38:52 DEBUG] transformed T195Mc.SPC -> T195MC.SPC
[sigmove 10:38:52 DEBUG] transformed T195Md.SPC -> T195MD.SPC
[sigmove 10:38:52 DEBUG] transformed T195Me.SPC -> T195ME.SPC
[sigmove 10:38:52 DEBUG] transformed T195Mf.SPC -> T195MF.SPC
[Status 10:38:52 INFO] data for T195 transferred to science data processing
[Tidy 10:38:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:38:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:38:52 INFO] resetting WatchDogTimer
[Status 10:38:53 INFO] Starting Set [AERI set: name U195, 6 scans, 0 angle, D16300 command]
[Ingest 10:38:53 INFO] Sending XML status message
[Status 10:38:53 INFO] Mirror angle: 0
[Mirror 10:38:53 INFO] rotating to position U
[Status 10:38:53 INFO] .SET file for ACQ96 ready
[Ingest 10:38:54 INFO] Starting acquisition
[Status 10:38:54 INFO] reading housekeeping
[Status 10:39:12 INFO] acquire complete
[Status 10:39:13 INFO] writing housekeeping
[Sequencer 10:39:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:39:13 INFO] incremented U scene to 195 completed views
[Sequencer 10:39:13 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:39:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:39:13 INFO] incremented to [AERI set: name V195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:39:13 INFO] U195.SIG(18)
[sigmove 10:39:13 DEBUG] transformed U195Ma.SPC -> U195MA.SPC
[sigmove 10:39:13 DEBUG] transformed U195Mb.SPC -> U195MB.SPC
[sigmove 10:39:13 DEBUG] transformed U195Mc.SPC -> U195MC.SPC
[sigmove 10:39:13 DEBUG] transformed U195Md.SPC -> U195MD.SPC
[sigmove 10:39:13 DEBUG] transformed U195Me.SPC -> U195ME.SPC
[sigmove 10:39:13 DEBUG] transformed U195Mf.SPC -> U195MF.SPC
[Status 10:39:13 INFO] data for U195 transferred to science data processing
[Tidy 10:39:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:39:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:39:13 INFO] resetting WatchDogTimer
[Status 10:39:13 INFO] Starting Set [AERI set: name V195, 6 scans, 0 angle, D16300 command]
[Ingest 10:39:13 INFO] Sending XML status message
[Status 10:39:13 INFO] Mirror angle: 0
[Mirror 10:39:13 INFO] rotating to position V
[Status 10:39:14 INFO] .SET file for ACQ96 ready
[Ingest 10:39:14 INFO] Starting acquisition
[Status 10:39:14 INFO] reading housekeeping
[Status 10:39:32 INFO] acquire complete
[Status 10:39:33 INFO] writing housekeeping
[Sequencer 10:39:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:39:33 INFO] incremented V scene to 195 completed views
[Sequencer 10:39:33 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:39:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:39:33 INFO] incremented to [AERI set: name W195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:39:33 INFO] V195.SIG(18)
[sigmove 10:39:33 DEBUG] transformed V195Ma.SPC -> V195MA.SPC
[sigmove 10:39:33 DEBUG] transformed V195Mb.SPC -> V195MB.SPC
[sigmove 10:39:33 DEBUG] transformed V195Mc.SPC -> V195MC.SPC
[sigmove 10:39:33 DEBUG] transformed V195Md.SPC -> V195MD.SPC
[sigmove 10:39:33 DEBUG] transformed V195Me.SPC -> V195ME.SPC
[sigmove 10:39:33 DEBUG] transformed V195Mf.SPC -> V195MF.SPC
[Status 10:39:33 INFO] data for V195 transferred to science data processing
[Tidy 10:39:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:39:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:39:33 INFO] resetting WatchDogTimer
[Status 10:39:33 INFO] Starting Set [AERI set: name W195, 6 scans, 0 angle, D16300 command]
[Ingest 10:39:33 INFO] Sending XML status message
[Status 10:39:33 INFO] Mirror angle: 0
[Mirror 10:39:33 INFO] rotating to position W
[Status 10:39:34 INFO] .SET file for ACQ96 ready
[Ingest 10:39:34 INFO] Starting acquisition
[Status 10:39:34 INFO] reading housekeeping
[Status 10:39:52 INFO] acquire complete
[Status 10:39:53 INFO] writing housekeeping
[Sequencer 10:39:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:39:53 INFO] incremented W scene to 195 completed views
[Sequencer 10:39:53 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:39:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:39:53 INFO] incremented to [AERI set: name X195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:39:53 INFO] W195.SIG(18)
[sigmove 10:39:53 DEBUG] transformed W195Ma.SPC -> W195MA.SPC
[sigmove 10:39:53 DEBUG] transformed W195Mb.SPC -> W195MB.SPC
[sigmove 10:39:53 DEBUG] transformed W195Mc.SPC -> W195MC.SPC
[sigmove 10:39:53 DEBUG] transformed W195Md.SPC -> W195MD.SPC
[sigmove 10:39:53 DEBUG] transformed W195Me.SPC -> W195ME.SPC
[sigmove 10:39:53 DEBUG] transformed W195Mf.SPC -> W195MF.SPC
[Status 10:39:53 INFO] data for W195 transferred to science data processing
[Tidy 10:39:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:39:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:39:53 INFO] resetting WatchDogTimer
[Status 10:39:53 INFO] Starting Set [AERI set: name X195, 6 scans, 0 angle, D16300 command]
[Ingest 10:39:53 INFO] Sending XML status message
[Status 10:39:53 INFO] Mirror angle: 0
[Mirror 10:39:54 INFO] rotating to position X
[Status 10:39:54 INFO] .SET file for ACQ96 ready
[Ingest 10:39:54 INFO] Starting acquisition
[Status 10:39:54 INFO] reading housekeeping
[Status 10:40:13 INFO] acquire complete
[Status 10:40:13 INFO] writing housekeeping
[Sequencer 10:40:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:40:13 INFO] incremented X scene to 195 completed views
[Sequencer 10:40:13 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:40:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:40:13 INFO] incremented to [AERI set: name Y195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:40:13 INFO] X195.SIG(18)
[sigmove 10:40:13 DEBUG] transformed X195Ma.SPC -> X195MA.SPC
[sigmove 10:40:13 DEBUG] transformed X195Mb.SPC -> X195MB.SPC
[sigmove 10:40:13 DEBUG] transformed X195Mc.SPC -> X195MC.SPC
[sigmove 10:40:13 DEBUG] transformed X195Md.SPC -> X195MD.SPC
[sigmove 10:40:13 DEBUG] transformed X195Me.SPC -> X195ME.SPC
[sigmove 10:40:13 DEBUG] transformed X195Mf.SPC -> X195MF.SPC
[Status 10:40:13 INFO] data for X195 transferred to science data processing
[Tidy 10:40:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:40:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:40:13 INFO] resetting WatchDogTimer
[Status 10:40:14 INFO] Starting Set [AERI set: name Y195, 6 scans, 0 angle, D16300 command]
[Ingest 10:40:14 INFO] Sending XML status message
[Status 10:40:14 INFO] Mirror angle: 0
[Mirror 10:40:14 INFO] rotating to position Y
[Status 10:40:14 INFO] .SET file for ACQ96 ready
[Ingest 10:40:14 INFO] Starting acquisition
[Status 10:40:15 INFO] reading housekeeping
[Status 10:40:33 INFO] acquire complete
[Status 10:40:33 INFO] writing housekeeping
[Sequencer 10:40:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:40:33 INFO] incremented Y scene to 195 completed views
[Sequencer 10:40:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:40:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:40:33 INFO] incremented to [AERI set: name Z195, 6 scans, 0 angle, D16300 command] set
[sigmove 10:40:33 INFO] Y195.SIG(18)
[sigmove 10:40:33 DEBUG] transformed Y195Ma.SPC -> Y195MA.SPC
[sigmove 10:40:33 DEBUG] transformed Y195Mb.SPC -> Y195MB.SPC
[sigmove 10:40:33 DEBUG] transformed Y195Mc.SPC -> Y195MC.SPC
[sigmove 10:40:33 DEBUG] transformed Y195Md.SPC -> Y195MD.SPC
[sigmove 10:40:33 DEBUG] transformed Y195Me.SPC -> Y195ME.SPC
[sigmove 10:40:33 DEBUG] transformed Y195Mf.SPC -> Y195MF.SPC
[Status 10:40:34 INFO] data for Y195 transferred to science data processing
[Tidy 10:40:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:40:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:40:34 INFO] resetting WatchDogTimer
[Status 10:40:34 INFO] Starting Set [AERI set: name Z195, 6 scans, 0 angle, D16300 command]
[Ingest 10:40:34 INFO] Sending XML status message
[Status 10:40:34 INFO] Mirror angle: 0
[Mirror 10:40:34 INFO] rotating to position Z
[Status 10:40:34 INFO] .SET file for ACQ96 ready
[Ingest 10:40:35 INFO] Starting acquisition
[Status 10:40:35 INFO] reading housekeeping
[Status 10:40:53 INFO] acquire complete
[Status 10:40:54 INFO] writing housekeeping
[Sequencer 10:40:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:40:54 INFO] incremented Z scene to 195 completed views
[Sequencer 10:40:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:40:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:40:54 INFO] incremented to [AERI set: name A196, 6 scans, 120 angle, D28300 command] set
[sigmove 10:40:54 INFO] Z195.SIG(18)
[sigmove 10:40:54 DEBUG] transformed Z195Ma.SPC -> Z195MA.SPC
[sigmove 10:40:54 DEBUG] transformed Z195Mb.SPC -> Z195MB.SPC
[sigmove 10:40:54 DEBUG] transformed Z195Mc.SPC -> Z195MC.SPC
[sigmove 10:40:54 DEBUG] transformed Z195Md.SPC -> Z195MD.SPC
[sigmove 10:40:54 DEBUG] transformed Z195Me.SPC -> Z195ME.SPC
[sigmove 10:40:54 DEBUG] transformed Z195Mf.SPC -> Z195MF.SPC
[Status 10:40:54 INFO] data for Z195 transferred to science data processing
[Tidy 10:40:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:40:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:40:54 INFO] resetting WatchDogTimer
[Status 10:40:54 INFO] Starting Set [AERI set: name A196, 6 scans, 120 angle, D28300 command]
[Ingest 10:40:54 INFO] Sending XML status message
[Status 10:40:54 INFO] Mirror angle: 120
[Mirror 10:40:54 INFO] rotating to position A
[Status 10:40:56 INFO] .SET file for ACQ96 ready
[Ingest 10:40:56 INFO] Starting acquisition
[Status 10:40:56 INFO] reading housekeeping
[Status 10:41:14 INFO] acquire complete
[Status 10:41:15 INFO] writing housekeeping
[Sequencer 10:41:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:41:15 INFO] incremented A scene to 196 completed views
[Sequencer 10:41:15 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:41:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:41:15 INFO] incremented to [AERI set: name H196, 6 scans, 60 angle, D22500 command] set
[sigmove 10:41:15 INFO] A196.SIG(18)
[sigmove 10:41:15 DEBUG] transformed A196Ma.SPC -> A196MA.SPC
[sigmove 10:41:15 DEBUG] transformed A196Mb.SPC -> A196MB.SPC
[sigmove 10:41:15 DEBUG] transformed A196Mc.SPC -> A196MC.SPC
[sigmove 10:41:15 DEBUG] transformed A196Md.SPC -> A196MD.SPC
[sigmove 10:41:15 DEBUG] transformed A196Me.SPC -> A196ME.SPC
[sigmove 10:41:15 DEBUG] transformed A196Mf.SPC -> A196MF.SPC
[Status 10:41:15 INFO] data for A196 transferred to science data processing
[Tidy 10:41:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:41:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:41:15 INFO] resetting WatchDogTimer
[Status 10:41:15 INFO] Starting Set [AERI set: name H196, 6 scans, 60 angle, D22500 command]
[Ingest 10:41:15 INFO] Sending XML status message
[Status 10:41:15 INFO] Mirror angle: 60
[Mirror 10:41:15 INFO] rotating to position H
[Status 10:41:16 INFO] .SET file for ACQ96 ready
[Ingest 10:41:17 INFO] Starting acquisition
[Status 10:41:17 INFO] reading housekeeping
[Status 10:41:34 INFO] acquire complete
[Status 10:41:35 INFO] writing housekeeping
[Sequencer 10:41:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:41:35 INFO] incremented H scene to 196 completed views
[Sequencer 10:41:35 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:41:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:41:35 INFO] incremented to [AERI set: name S196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:41:35 INFO] H196.SIG(18)
[sigmove 10:41:35 DEBUG] transformed H196Ma.SPC -> H196MA.SPC
[sigmove 10:41:35 DEBUG] transformed H196Mb.SPC -> H196MB.SPC
[sigmove 10:41:35 DEBUG] transformed H196Mc.SPC -> H196MC.SPC
[sigmove 10:41:35 DEBUG] transformed H196Md.SPC -> H196MD.SPC
[sigmove 10:41:35 DEBUG] transformed H196Me.SPC -> H196ME.SPC
[sigmove 10:41:35 DEBUG] transformed H196Mf.SPC -> H196MF.SPC
[Status 10:41:35 INFO] data for H196 transferred to science data processing
[Tidy 10:41:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:41:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:41:35 INFO] resetting WatchDogTimer
[Status 10:41:35 INFO] Starting Set [AERI set: name S196, 6 scans, 0 angle, D16300 command]
[Ingest 10:41:35 INFO] Sending XML status message
[Status 10:41:35 INFO] Mirror angle: 0
[Mirror 10:41:36 INFO] rotating to position S
[Status 10:41:37 INFO] .SET file for ACQ96 ready
[Ingest 10:41:37 INFO] Starting acquisition
[Status 10:41:37 INFO] reading housekeeping
[Status 10:41:55 INFO] acquire complete
[Status 10:41:55 INFO] writing housekeeping
[Sequencer 10:41:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:41:55 INFO] incremented S scene to 196 completed views
[Sequencer 10:41:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:41:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:41:55 INFO] incremented to [AERI set: name T196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:41:55 INFO] S196.SIG(18)
[sigmove 10:41:55 DEBUG] transformed S196Ma.SPC -> S196MA.SPC
[sigmove 10:41:55 DEBUG] transformed S196Mb.SPC -> S196MB.SPC
[sigmove 10:41:55 DEBUG] transformed S196Mc.SPC -> S196MC.SPC
[sigmove 10:41:55 DEBUG] transformed S196Md.SPC -> S196MD.SPC
[sigmove 10:41:55 DEBUG] transformed S196Me.SPC -> S196ME.SPC
[sigmove 10:41:55 DEBUG] transformed S196Mf.SPC -> S196MF.SPC
[Status 10:41:55 INFO] data for S196 transferred to science data processing
[Tidy 10:41:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:41:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:41:55 INFO] resetting WatchDogTimer
[Status 10:41:56 INFO] Starting Set [AERI set: name T196, 6 scans, 0 angle, D16300 command]
[Ingest 10:41:56 INFO] Sending XML status message
[Status 10:41:56 INFO] Mirror angle: 0
[Mirror 10:41:56 INFO] rotating to position T
[Status 10:41:56 INFO] .SET file for ACQ96 ready
[Ingest 10:41:56 INFO] Starting acquisition
[Status 10:41:57 INFO] reading housekeeping
[Status 10:42:15 INFO] acquire complete
[Status 10:42:16 INFO] writing housekeeping
[Sequencer 10:42:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:42:16 INFO] incremented T scene to 196 completed views
[Sequencer 10:42:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:42:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:42:16 INFO] incremented to [AERI set: name U196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:42:16 INFO] T196.SIG(18)
[sigmove 10:42:16 DEBUG] transformed T196Ma.SPC -> T196MA.SPC
[sigmove 10:42:16 DEBUG] transformed T196Mb.SPC -> T196MB.SPC
[sigmove 10:42:16 DEBUG] transformed T196Mc.SPC -> T196MC.SPC
[sigmove 10:42:16 DEBUG] transformed T196Md.SPC -> T196MD.SPC
[sigmove 10:42:16 DEBUG] transformed T196Me.SPC -> T196ME.SPC
[sigmove 10:42:16 DEBUG] transformed T196Mf.SPC -> T196MF.SPC
[Status 10:42:16 INFO] data for T196 transferred to science data processing
[Tidy 10:42:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:42:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:42:16 INFO] resetting WatchDogTimer
[Status 10:42:16 INFO] Starting Set [AERI set: name U196, 6 scans, 0 angle, D16300 command]
[Ingest 10:42:16 INFO] Sending XML status message
[Status 10:42:16 INFO] Mirror angle: 0
[Mirror 10:42:16 INFO] rotating to position U
[Status 10:42:16 INFO] .SET file for ACQ96 ready
[Ingest 10:42:17 INFO] Starting acquisition
[Status 10:42:17 INFO] reading housekeeping
[Status 10:42:35 INFO] acquire complete
[Status 10:42:36 INFO] writing housekeeping
[Sequencer 10:42:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:42:36 INFO] incremented U scene to 196 completed views
[Sequencer 10:42:36 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:42:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:42:36 INFO] incremented to [AERI set: name V196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:42:36 INFO] U196.SIG(18)
[sigmove 10:42:36 DEBUG] transformed U196Ma.SPC -> U196MA.SPC
[sigmove 10:42:36 DEBUG] transformed U196Mb.SPC -> U196MB.SPC
[sigmove 10:42:36 DEBUG] transformed U196Mc.SPC -> U196MC.SPC
[sigmove 10:42:36 DEBUG] transformed U196Md.SPC -> U196MD.SPC
[sigmove 10:42:36 DEBUG] transformed U196Me.SPC -> U196ME.SPC
[sigmove 10:42:36 DEBUG] transformed U196Mf.SPC -> U196MF.SPC
[Status 10:42:36 INFO] data for U196 transferred to science data processing
[Tidy 10:42:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:42:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:42:36 INFO] resetting WatchDogTimer
[Status 10:42:36 INFO] Starting Set [AERI set: name V196, 6 scans, 0 angle, D16300 command]
[Ingest 10:42:36 INFO] Sending XML status message
[Status 10:42:36 INFO] Mirror angle: 0
[Mirror 10:42:36 INFO] rotating to position V
[Status 10:42:37 INFO] .SET file for ACQ96 ready
[Ingest 10:42:37 INFO] Starting acquisition
[Status 10:42:37 INFO] reading housekeeping
[Status 10:42:55 INFO] acquire complete
[Status 10:42:56 INFO] writing housekeeping
[Sequencer 10:42:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:42:56 INFO] incremented V scene to 196 completed views
[Sequencer 10:42:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:42:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:42:56 INFO] incremented to [AERI set: name W196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:42:56 INFO] V196.SIG(18)
[sigmove 10:42:56 DEBUG] transformed V196Ma.SPC -> V196MA.SPC
[sigmove 10:42:56 DEBUG] transformed V196Mb.SPC -> V196MB.SPC
[sigmove 10:42:56 DEBUG] transformed V196Mc.SPC -> V196MC.SPC
[sigmove 10:42:56 DEBUG] transformed V196Md.SPC -> V196MD.SPC
[sigmove 10:42:56 DEBUG] transformed V196Me.SPC -> V196ME.SPC
[sigmove 10:42:56 DEBUG] transformed V196Mf.SPC -> V196MF.SPC
[Status 10:42:56 INFO] data for V196 transferred to science data processing
[Tidy 10:42:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:42:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:42:56 INFO] resetting WatchDogTimer
[Status 10:42:56 INFO] Starting Set [AERI set: name W196, 6 scans, 0 angle, D16300 command]
[Ingest 10:42:56 INFO] Sending XML status message
[Status 10:42:56 INFO] Mirror angle: 0
[Mirror 10:42:56 INFO] rotating to position W
[Status 10:42:57 INFO] .SET file for ACQ96 ready
[Ingest 10:42:57 INFO] Starting acquisition
[Status 10:42:57 INFO] reading housekeeping
[Status 10:43:15 INFO] acquire complete
[Status 10:43:16 INFO] writing housekeeping
[Sequencer 10:43:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:43:16 INFO] incremented W scene to 196 completed views
[Sequencer 10:43:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:43:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:43:16 INFO] incremented to [AERI set: name X196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:43:16 INFO] W196.SIG(18)
[sigmove 10:43:16 DEBUG] transformed W196Ma.SPC -> W196MA.SPC
[sigmove 10:43:16 DEBUG] transformed W196Mb.SPC -> W196MB.SPC
[sigmove 10:43:16 DEBUG] transformed W196Mc.SPC -> W196MC.SPC
[sigmove 10:43:16 DEBUG] transformed W196Md.SPC -> W196MD.SPC
[sigmove 10:43:16 DEBUG] transformed W196Me.SPC -> W196ME.SPC
[sigmove 10:43:16 DEBUG] transformed W196Mf.SPC -> W196MF.SPC
[Status 10:43:16 INFO] data for W196 transferred to science data processing
[Tidy 10:43:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:43:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:43:16 INFO] resetting WatchDogTimer
[Status 10:43:16 INFO] Starting Set [AERI set: name X196, 6 scans, 0 angle, D16300 command]
[Ingest 10:43:16 INFO] Sending XML status message
[Status 10:43:16 INFO] Mirror angle: 0
[Mirror 10:43:17 INFO] rotating to position X
[Status 10:43:17 INFO] .SET file for ACQ96 ready
[Ingest 10:43:17 INFO] Starting acquisition
[Status 10:43:18 INFO] reading housekeeping
[Status 10:43:36 INFO] acquire complete
[Status 10:43:36 INFO] writing housekeeping
[Sequencer 10:43:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:43:36 INFO] incremented X scene to 196 completed views
[Sequencer 10:43:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:43:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:43:36 INFO] incremented to [AERI set: name Y196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:43:36 INFO] X196.SIG(18)
[sigmove 10:43:36 DEBUG] transformed X196Ma.SPC -> X196MA.SPC
[sigmove 10:43:36 DEBUG] transformed X196Mb.SPC -> X196MB.SPC
[sigmove 10:43:36 DEBUG] transformed X196Mc.SPC -> X196MC.SPC
[sigmove 10:43:36 DEBUG] transformed X196Md.SPC -> X196MD.SPC
[sigmove 10:43:36 DEBUG] transformed X196Me.SPC -> X196ME.SPC
[sigmove 10:43:36 DEBUG] transformed X196Mf.SPC -> X196MF.SPC
[Status 10:43:36 INFO] data for X196 transferred to science data processing
[Tidy 10:43:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:43:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:43:36 INFO] resetting WatchDogTimer
[Status 10:43:37 INFO] Starting Set [AERI set: name Y196, 6 scans, 0 angle, D16300 command]
[Ingest 10:43:37 INFO] Sending XML status message
[Status 10:43:37 INFO] Mirror angle: 0
[Mirror 10:43:37 INFO] rotating to position Y
[Status 10:43:37 INFO] .SET file for ACQ96 ready
[Ingest 10:43:37 INFO] Starting acquisition
[Status 10:43:38 INFO] reading housekeeping
[Status 10:43:56 INFO] acquire complete
[Status 10:43:57 INFO] writing housekeeping
[Sequencer 10:43:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:43:57 INFO] incremented Y scene to 196 completed views
[Sequencer 10:43:57 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:43:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:43:57 INFO] incremented to [AERI set: name Z196, 6 scans, 0 angle, D16300 command] set
[sigmove 10:43:57 INFO] Y196.SIG(18)
[sigmove 10:43:57 DEBUG] transformed Y196Ma.SPC -> Y196MA.SPC
[sigmove 10:43:57 DEBUG] transformed Y196Mb.SPC -> Y196MB.SPC
[sigmove 10:43:57 DEBUG] transformed Y196Mc.SPC -> Y196MC.SPC
[sigmove 10:43:57 DEBUG] transformed Y196Md.SPC -> Y196MD.SPC
[sigmove 10:43:57 DEBUG] transformed Y196Me.SPC -> Y196ME.SPC
[sigmove 10:43:57 DEBUG] transformed Y196Mf.SPC -> Y196MF.SPC
[Status 10:43:57 INFO] data for Y196 transferred to science data processing
[Tidy 10:43:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:43:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:43:57 INFO] resetting WatchDogTimer
[Status 10:43:57 INFO] Starting Set [AERI set: name Z196, 6 scans, 0 angle, D16300 command]
[Ingest 10:43:57 INFO] Sending XML status message
[Status 10:43:57 INFO] Mirror angle: 0
[Mirror 10:43:57 INFO] rotating to position Z
[Status 10:43:57 INFO] .SET file for ACQ96 ready
[Ingest 10:43:58 INFO] Starting acquisition
[Status 10:43:58 INFO] reading housekeeping
[Status 10:44:16 INFO] acquire complete
[Status 10:44:17 INFO] writing housekeeping
[Sequencer 10:44:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:44:17 INFO] incremented Z scene to 196 completed views
[Sequencer 10:44:17 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:44:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:44:17 INFO] incremented to [AERI set: name H197, 6 scans, 60 angle, D22500 command] set
[sigmove 10:44:17 INFO] Z196.SIG(18)
[sigmove 10:44:17 DEBUG] transformed Z196Ma.SPC -> Z196MA.SPC
[sigmove 10:44:17 DEBUG] transformed Z196Mb.SPC -> Z196MB.SPC
[sigmove 10:44:17 DEBUG] transformed Z196Mc.SPC -> Z196MC.SPC
[sigmove 10:44:17 DEBUG] transformed Z196Md.SPC -> Z196MD.SPC
[sigmove 10:44:17 DEBUG] transformed Z196Me.SPC -> Z196ME.SPC
[sigmove 10:44:17 DEBUG] transformed Z196Mf.SPC -> Z196MF.SPC
[Status 10:44:17 INFO] data for Z196 transferred to science data processing
[Tidy 10:44:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:44:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:44:17 INFO] resetting WatchDogTimer
[Status 10:44:17 INFO] Starting Set [AERI set: name H197, 6 scans, 60 angle, D22500 command]
[Ingest 10:44:17 INFO] Sending XML status message
[Status 10:44:17 INFO] Mirror angle: 60
[Mirror 10:44:17 INFO] rotating to position H
[Status 10:44:18 INFO] .SET file for ACQ96 ready
[Ingest 10:44:18 INFO] Starting acquisition
[Status 10:44:19 INFO] reading housekeeping
[Status 10:44:36 INFO] acquire complete
[Status 10:44:37 INFO] writing housekeeping
[Sequencer 10:44:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:44:37 INFO] incremented H scene to 197 completed views
[Sequencer 10:44:37 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:44:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:44:37 INFO] incremented to [AERI set: name A197, 6 scans, 120 angle, D28300 command] set
[sigmove 10:44:37 INFO] H197.SIG(18)
[sigmove 10:44:37 DEBUG] transformed H197Ma.SPC -> H197MA.SPC
[sigmove 10:44:37 DEBUG] transformed H197Mb.SPC -> H197MB.SPC
[sigmove 10:44:37 DEBUG] transformed H197Mc.SPC -> H197MC.SPC
[sigmove 10:44:37 DEBUG] transformed H197Md.SPC -> H197MD.SPC
[sigmove 10:44:37 DEBUG] transformed H197Me.SPC -> H197ME.SPC
[sigmove 10:44:37 DEBUG] transformed H197Mf.SPC -> H197MF.SPC
[Status 10:44:37 INFO] data for H197 transferred to science data processing
[Tidy 10:44:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:44:37 INFO] A195.FIN(19),H195.FIN(19),S195.FIN(19),T195.FIN(19),U195.FIN(19),V195.FIN(19),W195.FIN(19),X195.FIN(19),Y195.FIN(19),Z195.FIN(19),A196.FIN(19),H196.FIN(19),S196.FIN(19),T196.FIN(19),U196.FIN(19),V196.FIN(19),W196.FIN(19),X196.FIN(19),Y196.FIN(19),Z196.FIN(19)
[sigmove 10:44:37 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:44:37 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:44:41 DEBUG] done zipping
[WatchDog 10:44:41 INFO] resetting WatchDogTimer
[Status 10:44:41 INFO] Starting Set [AERI set: name A197, 6 scans, 120 angle, D28300 command]
[Ingest 10:44:41 INFO] Sending XML status message
[Status 10:44:41 INFO] Mirror angle: 120
[Mirror 10:44:41 INFO] rotating to position A
[Status 10:44:42 INFO] .SET file for ACQ96 ready
[Ingest 10:44:42 INFO] Starting acquisition
[Status 10:44:43 INFO] reading housekeeping
[Status 10:45:01 INFO] acquire complete
[Status 10:45:02 INFO] writing housekeeping
[Sequencer 10:45:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:45:02 INFO] incremented A scene to 197 completed views
[Sequencer 10:45:02 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:45:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:45:02 INFO] incremented to [AERI set: name S197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:45:02 INFO] A197.SIG(18)
[sigmove 10:45:02 DEBUG] transformed A197Ma.SPC -> A197MA.SPC
[sigmove 10:45:02 DEBUG] transformed A197Mb.SPC -> A197MB.SPC
[sigmove 10:45:02 DEBUG] transformed A197Mc.SPC -> A197MC.SPC
[sigmove 10:45:02 DEBUG] transformed A197Md.SPC -> A197MD.SPC
[sigmove 10:45:02 DEBUG] transformed A197Me.SPC -> A197ME.SPC
[sigmove 10:45:02 DEBUG] transformed A197Mf.SPC -> A197MF.SPC
[Status 10:45:02 INFO] data for A197 transferred to science data processing
[Tidy 10:45:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:45:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:45:02 INFO] resetting WatchDogTimer
[Status 10:45:02 INFO] Starting Set [AERI set: name S197, 6 scans, 0 angle, D16300 command]
[Ingest 10:45:02 INFO] Sending XML status message
[Status 10:45:02 INFO] Mirror angle: 0
[Mirror 10:45:02 INFO] rotating to position S
[Status 10:45:04 INFO] .SET file for ACQ96 ready
[Ingest 10:45:04 INFO] Starting acquisition
[Status 10:45:04 INFO] reading housekeeping
[Status 10:45:22 INFO] acquire complete
[Status 10:45:23 INFO] writing housekeeping
[Sequencer 10:45:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:45:23 INFO] incremented S scene to 197 completed views
[Sequencer 10:45:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:45:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:45:23 INFO] incremented to [AERI set: name T197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:45:23 INFO] S197.SIG(18)
[sigmove 10:45:23 DEBUG] transformed S197Ma.SPC -> S197MA.SPC
[sigmove 10:45:23 DEBUG] transformed S197Mb.SPC -> S197MB.SPC
[sigmove 10:45:23 DEBUG] transformed S197Mc.SPC -> S197MC.SPC
[sigmove 10:45:23 DEBUG] transformed S197Md.SPC -> S197MD.SPC
[sigmove 10:45:23 DEBUG] transformed S197Me.SPC -> S197ME.SPC
[sigmove 10:45:23 DEBUG] transformed S197Mf.SPC -> S197MF.SPC
[Status 10:45:23 INFO] data for S197 transferred to science data processing
[Tidy 10:45:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:45:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:45:23 INFO] resetting WatchDogTimer
[Status 10:45:23 INFO] Starting Set [AERI set: name T197, 6 scans, 0 angle, D16300 command]
[Ingest 10:45:23 INFO] Sending XML status message
[Status 10:45:23 INFO] Mirror angle: 0
[Mirror 10:45:23 INFO] rotating to position T
[Status 10:45:24 INFO] .SET file for ACQ96 ready
[Ingest 10:45:24 INFO] Starting acquisition
[Status 10:45:24 INFO] reading housekeeping
[Status 10:45:42 INFO] acquire complete
[Status 10:45:43 INFO] writing housekeeping
[Sequencer 10:45:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:45:43 INFO] incremented T scene to 197 completed views
[Sequencer 10:45:43 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:45:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:45:43 INFO] incremented to [AERI set: name U197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:45:43 INFO] T197.SIG(18)
[sigmove 10:45:43 DEBUG] transformed T197Ma.SPC -> T197MA.SPC
[sigmove 10:45:43 DEBUG] transformed T197Mb.SPC -> T197MB.SPC
[sigmove 10:45:43 DEBUG] transformed T197Mc.SPC -> T197MC.SPC
[sigmove 10:45:43 DEBUG] transformed T197Md.SPC -> T197MD.SPC
[sigmove 10:45:43 DEBUG] transformed T197Me.SPC -> T197ME.SPC
[sigmove 10:45:43 DEBUG] transformed T197Mf.SPC -> T197MF.SPC
[Status 10:45:43 INFO] data for T197 transferred to science data processing
[Tidy 10:45:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:45:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:45:43 INFO] resetting WatchDogTimer
[Status 10:45:43 INFO] Starting Set [AERI set: name U197, 6 scans, 0 angle, D16300 command]
[Ingest 10:45:43 INFO] Sending XML status message
[Status 10:45:43 INFO] Mirror angle: 0
[Mirror 10:45:44 INFO] rotating to position U
[Status 10:45:44 INFO] .SET file for ACQ96 ready
[Ingest 10:45:44 INFO] Starting acquisition
[Status 10:45:45 INFO] reading housekeeping
[Status 10:46:03 INFO] acquire complete
[Status 10:46:03 INFO] writing housekeeping
[Sequencer 10:46:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:46:03 INFO] incremented U scene to 197 completed views
[Sequencer 10:46:03 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:46:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:46:03 INFO] incremented to [AERI set: name V197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:46:03 INFO] U197.SIG(18)
[sigmove 10:46:03 DEBUG] transformed U197Ma.SPC -> U197MA.SPC
[sigmove 10:46:03 DEBUG] transformed U197Mb.SPC -> U197MB.SPC
[sigmove 10:46:03 DEBUG] transformed U197Mc.SPC -> U197MC.SPC
[sigmove 10:46:03 DEBUG] transformed U197Md.SPC -> U197MD.SPC
[sigmove 10:46:03 DEBUG] transformed U197Me.SPC -> U197ME.SPC
[sigmove 10:46:03 DEBUG] transformed U197Mf.SPC -> U197MF.SPC
[Status 10:46:03 INFO] data for U197 transferred to science data processing
[Tidy 10:46:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:46:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:46:03 INFO] resetting WatchDogTimer
[Status 10:46:04 INFO] Starting Set [AERI set: name V197, 6 scans, 0 angle, D16300 command]
[Ingest 10:46:04 INFO] Sending XML status message
[Status 10:46:04 INFO] Mirror angle: 0
[Mirror 10:46:04 INFO] rotating to position V
[Status 10:46:04 INFO] .SET file for ACQ96 ready
[Ingest 10:46:04 INFO] Starting acquisition
[Status 10:46:05 INFO] reading housekeeping
[Status 10:46:23 INFO] acquire complete
[Status 10:46:24 INFO] writing housekeeping
[Sequencer 10:46:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:46:24 INFO] incremented V scene to 197 completed views
[Sequencer 10:46:24 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:46:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:46:24 INFO] incremented to [AERI set: name W197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:46:24 INFO] V197.SIG(18)
[sigmove 10:46:24 DEBUG] transformed V197Ma.SPC -> V197MA.SPC
[sigmove 10:46:24 DEBUG] transformed V197Mb.SPC -> V197MB.SPC
[sigmove 10:46:24 DEBUG] transformed V197Mc.SPC -> V197MC.SPC
[sigmove 10:46:24 DEBUG] transformed V197Md.SPC -> V197MD.SPC
[sigmove 10:46:24 DEBUG] transformed V197Me.SPC -> V197ME.SPC
[sigmove 10:46:24 DEBUG] transformed V197Mf.SPC -> V197MF.SPC
[Status 10:46:24 INFO] data for V197 transferred to science data processing
[Tidy 10:46:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:46:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:46:24 INFO] resetting WatchDogTimer
[Status 10:46:24 INFO] Starting Set [AERI set: name W197, 6 scans, 0 angle, D16300 command]
[Ingest 10:46:24 INFO] Sending XML status message
[Status 10:46:24 INFO] Mirror angle: 0
[Mirror 10:46:24 INFO] rotating to position W
[Status 10:46:24 INFO] .SET file for ACQ96 ready
[Ingest 10:46:25 INFO] Starting acquisition
[Status 10:46:25 INFO] reading housekeeping
[Status 10:46:43 INFO] acquire complete
[Status 10:46:44 INFO] writing housekeeping
[Sequencer 10:46:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:46:44 INFO] incremented W scene to 197 completed views
[Sequencer 10:46:44 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:46:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:46:44 INFO] incremented to [AERI set: name X197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:46:44 INFO] W197.SIG(18)
[sigmove 10:46:44 DEBUG] transformed W197Ma.SPC -> W197MA.SPC
[sigmove 10:46:44 DEBUG] transformed W197Mb.SPC -> W197MB.SPC
[sigmove 10:46:44 DEBUG] transformed W197Mc.SPC -> W197MC.SPC
[sigmove 10:46:44 DEBUG] transformed W197Md.SPC -> W197MD.SPC
[sigmove 10:46:44 DEBUG] transformed W197Me.SPC -> W197ME.SPC
[sigmove 10:46:44 DEBUG] transformed W197Mf.SPC -> W197MF.SPC
[Status 10:46:44 INFO] data for W197 transferred to science data processing
[Tidy 10:46:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:46:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:46:44 INFO] resetting WatchDogTimer
[Status 10:46:44 INFO] Starting Set [AERI set: name X197, 6 scans, 0 angle, D16300 command]
[Ingest 10:46:44 INFO] Sending XML status message
[Status 10:46:44 INFO] Mirror angle: 0
[Mirror 10:46:44 INFO] rotating to position X
[Status 10:46:45 INFO] .SET file for ACQ96 ready
[Ingest 10:46:45 INFO] Starting acquisition
[Status 10:46:45 INFO] reading housekeeping
[Status 10:47:03 INFO] acquire complete
[Status 10:47:04 INFO] writing housekeeping
[Sequencer 10:47:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:47:04 INFO] incremented X scene to 197 completed views
[Sequencer 10:47:04 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:47:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:47:04 INFO] incremented to [AERI set: name Y197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:47:04 INFO] X197.SIG(18)
[sigmove 10:47:04 DEBUG] transformed X197Ma.SPC -> X197MA.SPC
[sigmove 10:47:04 DEBUG] transformed X197Mb.SPC -> X197MB.SPC
[sigmove 10:47:04 DEBUG] transformed X197Mc.SPC -> X197MC.SPC
[sigmove 10:47:04 DEBUG] transformed X197Md.SPC -> X197MD.SPC
[sigmove 10:47:04 DEBUG] transformed X197Me.SPC -> X197ME.SPC
[sigmove 10:47:04 DEBUG] transformed X197Mf.SPC -> X197MF.SPC
[Status 10:47:04 INFO] data for X197 transferred to science data processing
[Tidy 10:47:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:47:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:47:04 INFO] resetting WatchDogTimer
[Status 10:47:04 INFO] Starting Set [AERI set: name Y197, 6 scans, 0 angle, D16300 command]
[Ingest 10:47:04 INFO] Sending XML status message
[Status 10:47:04 INFO] Mirror angle: 0
[Mirror 10:47:04 INFO] rotating to position Y
[Status 10:47:05 INFO] .SET file for ACQ96 ready
[Ingest 10:47:05 INFO] Starting acquisition
[Status 10:47:05 INFO] reading housekeeping
[Status 10:47:23 INFO] acquire complete
[Status 10:47:24 INFO] writing housekeeping
[Sequencer 10:47:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:47:24 INFO] incremented Y scene to 197 completed views
[Sequencer 10:47:24 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:47:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:47:24 INFO] incremented to [AERI set: name Z197, 6 scans, 0 angle, D16300 command] set
[sigmove 10:47:24 INFO] Y197.SIG(18)
[sigmove 10:47:24 DEBUG] transformed Y197Ma.SPC -> Y197MA.SPC
[sigmove 10:47:24 DEBUG] transformed Y197Mb.SPC -> Y197MB.SPC
[sigmove 10:47:24 DEBUG] transformed Y197Mc.SPC -> Y197MC.SPC
[sigmove 10:47:24 DEBUG] transformed Y197Md.SPC -> Y197MD.SPC
[sigmove 10:47:24 DEBUG] transformed Y197Me.SPC -> Y197ME.SPC
[sigmove 10:47:24 DEBUG] transformed Y197Mf.SPC -> Y197MF.SPC
[Status 10:47:24 INFO] data for Y197 transferred to science data processing
[Tidy 10:47:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:47:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:47:24 INFO] resetting WatchDogTimer
[Status 10:47:24 INFO] Starting Set [AERI set: name Z197, 6 scans, 0 angle, D16300 command]
[Ingest 10:47:24 INFO] Sending XML status message
[Status 10:47:24 INFO] Mirror angle: 0
[Mirror 10:47:25 INFO] rotating to position Z
[Status 10:47:25 INFO] .SET file for ACQ96 ready
[Ingest 10:47:25 INFO] Starting acquisition
[Status 10:47:26 INFO] reading housekeeping
[Status 10:47:44 INFO] acquire complete
[Status 10:47:44 INFO] writing housekeeping
[Sequencer 10:47:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:47:44 INFO] incremented Z scene to 197 completed views
[Sequencer 10:47:44 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:47:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:47:44 INFO] incremented to [AERI set: name A198, 6 scans, 120 angle, D28300 command] set
[sigmove 10:47:44 INFO] Z197.SIG(18)
[sigmove 10:47:44 DEBUG] transformed Z197Ma.SPC -> Z197MA.SPC
[sigmove 10:47:44 DEBUG] transformed Z197Mb.SPC -> Z197MB.SPC
[sigmove 10:47:44 DEBUG] transformed Z197Mc.SPC -> Z197MC.SPC
[sigmove 10:47:44 DEBUG] transformed Z197Md.SPC -> Z197MD.SPC
[sigmove 10:47:44 DEBUG] transformed Z197Me.SPC -> Z197ME.SPC
[sigmove 10:47:44 DEBUG] transformed Z197Mf.SPC -> Z197MF.SPC
[Status 10:47:44 INFO] data for Z197 transferred to science data processing
[Tidy 10:47:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:47:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:47:44 INFO] resetting WatchDogTimer
[Status 10:47:45 INFO] Starting Set [AERI set: name A198, 6 scans, 120 angle, D28300 command]
[Ingest 10:47:45 INFO] Sending XML status message
[Status 10:47:45 INFO] Mirror angle: 120
[Mirror 10:47:45 INFO] rotating to position A
[Status 10:47:46 INFO] .SET file for ACQ96 ready
[Ingest 10:47:46 INFO] Starting acquisition
[Status 10:47:47 INFO] reading housekeeping
[Status 10:48:05 INFO] acquire complete
[Status 10:48:06 INFO] writing housekeeping
[Sequencer 10:48:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:48:06 INFO] incremented A scene to 198 completed views
[Sequencer 10:48:06 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:48:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:48:06 INFO] incremented to [AERI set: name H198, 6 scans, 60 angle, D22500 command] set
[sigmove 10:48:06 INFO] A198.SIG(18)
[sigmove 10:48:06 DEBUG] transformed A198Ma.SPC -> A198MA.SPC
[sigmove 10:48:06 DEBUG] transformed A198Mb.SPC -> A198MB.SPC
[sigmove 10:48:06 DEBUG] transformed A198Mc.SPC -> A198MC.SPC
[sigmove 10:48:06 DEBUG] transformed A198Md.SPC -> A198MD.SPC
[sigmove 10:48:06 DEBUG] transformed A198Me.SPC -> A198ME.SPC
[sigmove 10:48:06 DEBUG] transformed A198Mf.SPC -> A198MF.SPC
[Status 10:48:06 INFO] data for A198 transferred to science data processing
[Tidy 10:48:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:48:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:48:06 INFO] resetting WatchDogTimer
[Status 10:48:06 INFO] Starting Set [AERI set: name H198, 6 scans, 60 angle, D22500 command]
[Ingest 10:48:06 INFO] Sending XML status message
[Status 10:48:06 INFO] Mirror angle: 60
[Mirror 10:48:06 INFO] rotating to position H
[Status 10:48:07 INFO] .SET file for ACQ96 ready
[Ingest 10:48:07 INFO] Starting acquisition
[Status 10:48:08 INFO] reading housekeeping
[Status 10:48:25 INFO] acquire complete
[Status 10:48:26 INFO] writing housekeeping
[Sequencer 10:48:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:48:26 INFO] incremented H scene to 198 completed views
[Sequencer 10:48:26 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:48:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:48:26 INFO] incremented to [AERI set: name S198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:48:26 INFO] H198.SIG(18)
[sigmove 10:48:26 DEBUG] transformed H198Ma.SPC -> H198MA.SPC
[sigmove 10:48:26 DEBUG] transformed H198Mb.SPC -> H198MB.SPC
[sigmove 10:48:26 DEBUG] transformed H198Mc.SPC -> H198MC.SPC
[sigmove 10:48:26 DEBUG] transformed H198Md.SPC -> H198MD.SPC
[sigmove 10:48:26 DEBUG] transformed H198Me.SPC -> H198ME.SPC
[sigmove 10:48:26 DEBUG] transformed H198Mf.SPC -> H198MF.SPC
[Status 10:48:26 INFO] data for H198 transferred to science data processing
[Tidy 10:48:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:48:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:48:26 INFO] resetting WatchDogTimer
[Status 10:48:26 INFO] Starting Set [AERI set: name S198, 6 scans, 0 angle, D16300 command]
[Ingest 10:48:26 INFO] Sending XML status message
[Status 10:48:26 INFO] Mirror angle: 0
[Mirror 10:48:26 INFO] rotating to position S
[Status 10:48:27 INFO] .SET file for ACQ96 ready
[Ingest 10:48:27 INFO] Starting acquisition
[Status 10:48:28 INFO] reading housekeeping
[Status 10:48:45 INFO] acquire complete
[Status 10:48:46 INFO] writing housekeeping
[Sequencer 10:48:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:48:46 INFO] incremented S scene to 198 completed views
[Sequencer 10:48:46 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:48:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:48:46 INFO] incremented to [AERI set: name T198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:48:46 INFO] S198.SIG(18)
[sigmove 10:48:46 DEBUG] transformed S198Ma.SPC -> S198MA.SPC
[sigmove 10:48:46 DEBUG] transformed S198Mb.SPC -> S198MB.SPC
[sigmove 10:48:46 DEBUG] transformed S198Mc.SPC -> S198MC.SPC
[sigmove 10:48:46 DEBUG] transformed S198Md.SPC -> S198MD.SPC
[sigmove 10:48:46 DEBUG] transformed S198Me.SPC -> S198ME.SPC
[sigmove 10:48:46 DEBUG] transformed S198Mf.SPC -> S198MF.SPC
[Status 10:48:46 INFO] data for S198 transferred to science data processing
[Tidy 10:48:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:48:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:48:46 INFO] resetting WatchDogTimer
[Status 10:48:46 INFO] Starting Set [AERI set: name T198, 6 scans, 0 angle, D16300 command]
[Ingest 10:48:46 INFO] Sending XML status message
[Status 10:48:46 INFO] Mirror angle: 0
[Mirror 10:48:47 INFO] rotating to position T
[Status 10:48:47 INFO] .SET file for ACQ96 ready
[Ingest 10:48:47 INFO] Starting acquisition
[Status 10:48:47 INFO] reading housekeeping
[Status 10:49:05 INFO] acquire complete
[Status 10:49:06 INFO] writing housekeeping
[Sequencer 10:49:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:49:06 INFO] incremented T scene to 198 completed views
[Sequencer 10:49:06 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:49:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:49:06 INFO] incremented to [AERI set: name U198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:49:06 INFO] T198.SIG(18)
[sigmove 10:49:06 DEBUG] transformed T198Ma.SPC -> T198MA.SPC
[sigmove 10:49:06 DEBUG] transformed T198Mb.SPC -> T198MB.SPC
[sigmove 10:49:06 DEBUG] transformed T198Mc.SPC -> T198MC.SPC
[sigmove 10:49:06 DEBUG] transformed T198Md.SPC -> T198MD.SPC
[sigmove 10:49:06 DEBUG] transformed T198Me.SPC -> T198ME.SPC
[sigmove 10:49:06 DEBUG] transformed T198Mf.SPC -> T198MF.SPC
[Status 10:49:06 INFO] data for T198 transferred to science data processing
[Tidy 10:49:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:49:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:49:06 INFO] resetting WatchDogTimer
[Status 10:49:06 INFO] Starting Set [AERI set: name U198, 6 scans, 0 angle, D16300 command]
[Ingest 10:49:06 INFO] Sending XML status message
[Status 10:49:06 INFO] Mirror angle: 0
[Mirror 10:49:07 INFO] rotating to position U
[Status 10:49:07 INFO] .SET file for ACQ96 ready
[Ingest 10:49:08 INFO] Starting acquisition
[Status 10:49:08 INFO] reading housekeeping
[Status 10:49:26 INFO] acquire complete
[Status 10:49:26 INFO] writing housekeeping
[Sequencer 10:49:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:49:26 INFO] incremented U scene to 198 completed views
[Sequencer 10:49:26 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:49:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:49:26 INFO] incremented to [AERI set: name V198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:49:26 INFO] U198.SIG(18)
[sigmove 10:49:26 DEBUG] transformed U198Ma.SPC -> U198MA.SPC
[sigmove 10:49:26 DEBUG] transformed U198Mb.SPC -> U198MB.SPC
[sigmove 10:49:26 DEBUG] transformed U198Mc.SPC -> U198MC.SPC
[sigmove 10:49:26 DEBUG] transformed U198Md.SPC -> U198MD.SPC
[sigmove 10:49:26 DEBUG] transformed U198Me.SPC -> U198ME.SPC
[sigmove 10:49:26 DEBUG] transformed U198Mf.SPC -> U198MF.SPC
[Status 10:49:26 INFO] data for U198 transferred to science data processing
[Tidy 10:49:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:49:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:49:26 INFO] resetting WatchDogTimer
[Status 10:49:27 INFO] Starting Set [AERI set: name V198, 6 scans, 0 angle, D16300 command]
[Ingest 10:49:27 INFO] Sending XML status message
[Status 10:49:27 INFO] Mirror angle: 0
[Mirror 10:49:27 INFO] rotating to position V
[Status 10:49:27 INFO] .SET file for ACQ96 ready
[Ingest 10:49:27 INFO] Starting acquisition
[Status 10:49:28 INFO] reading housekeeping
[Status 10:49:46 INFO] acquire complete
[Status 10:49:47 INFO] writing housekeeping
[Sequencer 10:49:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:49:47 INFO] incremented V scene to 198 completed views
[Sequencer 10:49:47 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:49:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:49:47 INFO] incremented to [AERI set: name W198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:49:47 INFO] V198.SIG(18)
[sigmove 10:49:47 DEBUG] transformed V198Ma.SPC -> V198MA.SPC
[sigmove 10:49:47 DEBUG] transformed V198Mb.SPC -> V198MB.SPC
[sigmove 10:49:47 DEBUG] transformed V198Mc.SPC -> V198MC.SPC
[sigmove 10:49:47 DEBUG] transformed V198Md.SPC -> V198MD.SPC
[sigmove 10:49:47 DEBUG] transformed V198Me.SPC -> V198ME.SPC
[sigmove 10:49:47 DEBUG] transformed V198Mf.SPC -> V198MF.SPC
[Status 10:49:47 INFO] data for V198 transferred to science data processing
[Tidy 10:49:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:49:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:49:47 INFO] resetting WatchDogTimer
[Status 10:49:47 INFO] Starting Set [AERI set: name W198, 6 scans, 0 angle, D16300 command]
[Ingest 10:49:47 INFO] Sending XML status message
[Status 10:49:47 INFO] Mirror angle: 0
[Mirror 10:49:47 INFO] rotating to position W
[Status 10:49:47 INFO] .SET file for ACQ96 ready
[Ingest 10:49:48 INFO] Starting acquisition
[Status 10:49:48 INFO] reading housekeeping
[Status 10:50:06 INFO] acquire complete
[Status 10:50:07 INFO] writing housekeeping
[Sequencer 10:50:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:50:07 INFO] incremented W scene to 198 completed views
[Sequencer 10:50:07 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:50:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:50:07 INFO] incremented to [AERI set: name X198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:50:07 INFO] W198.SIG(18)
[sigmove 10:50:07 DEBUG] transformed W198Ma.SPC -> W198MA.SPC
[sigmove 10:50:07 DEBUG] transformed W198Mb.SPC -> W198MB.SPC
[sigmove 10:50:07 DEBUG] transformed W198Mc.SPC -> W198MC.SPC
[sigmove 10:50:07 DEBUG] transformed W198Md.SPC -> W198MD.SPC
[sigmove 10:50:07 DEBUG] transformed W198Me.SPC -> W198ME.SPC
[sigmove 10:50:07 DEBUG] transformed W198Mf.SPC -> W198MF.SPC
[Status 10:50:07 INFO] data for W198 transferred to science data processing
[Tidy 10:50:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:50:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:50:07 INFO] resetting WatchDogTimer
[Status 10:50:07 INFO] Starting Set [AERI set: name X198, 6 scans, 0 angle, D16300 command]
[Ingest 10:50:07 INFO] Sending XML status message
[Status 10:50:07 INFO] Mirror angle: 0
[Mirror 10:50:07 INFO] rotating to position X
[Status 10:50:08 INFO] .SET file for ACQ96 ready
[Ingest 10:50:08 INFO] Starting acquisition
[Status 10:50:08 INFO] reading housekeeping
[Status 10:50:26 INFO] acquire complete
[Status 10:50:27 INFO] writing housekeeping
[Sequencer 10:50:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:50:27 INFO] incremented X scene to 198 completed views
[Sequencer 10:50:27 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:50:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:50:27 INFO] incremented to [AERI set: name Y198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:50:27 INFO] X198.SIG(18)
[sigmove 10:50:27 DEBUG] transformed X198Ma.SPC -> X198MA.SPC
[sigmove 10:50:27 DEBUG] transformed X198Mb.SPC -> X198MB.SPC
[sigmove 10:50:27 DEBUG] transformed X198Mc.SPC -> X198MC.SPC
[sigmove 10:50:27 DEBUG] transformed X198Md.SPC -> X198MD.SPC
[sigmove 10:50:27 DEBUG] transformed X198Me.SPC -> X198ME.SPC
[sigmove 10:50:27 DEBUG] transformed X198Mf.SPC -> X198MF.SPC
[Status 10:50:27 INFO] data for X198 transferred to science data processing
[Tidy 10:50:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:50:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:50:27 INFO] resetting WatchDogTimer
[Status 10:50:27 INFO] Starting Set [AERI set: name Y198, 6 scans, 0 angle, D16300 command]
[Ingest 10:50:27 INFO] Sending XML status message
[Status 10:50:27 INFO] Mirror angle: 0
[Mirror 10:50:28 INFO] rotating to position Y
[Status 10:50:28 INFO] .SET file for ACQ96 ready
[Ingest 10:50:28 INFO] Starting acquisition
[Status 10:50:28 INFO] reading housekeeping
[Status 10:50:46 INFO] acquire complete
[Status 10:50:47 INFO] writing housekeeping
[Sequencer 10:50:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:50:47 INFO] incremented Y scene to 198 completed views
[Sequencer 10:50:47 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:50:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:50:47 INFO] incremented to [AERI set: name Z198, 6 scans, 0 angle, D16300 command] set
[sigmove 10:50:47 INFO] Y198.SIG(18)
[sigmove 10:50:47 DEBUG] transformed Y198Ma.SPC -> Y198MA.SPC
[sigmove 10:50:47 DEBUG] transformed Y198Mb.SPC -> Y198MB.SPC
[sigmove 10:50:47 DEBUG] transformed Y198Mc.SPC -> Y198MC.SPC
[sigmove 10:50:47 DEBUG] transformed Y198Md.SPC -> Y198MD.SPC
[sigmove 10:50:47 DEBUG] transformed Y198Me.SPC -> Y198ME.SPC
[sigmove 10:50:47 DEBUG] transformed Y198Mf.SPC -> Y198MF.SPC
[Status 10:50:47 INFO] data for Y198 transferred to science data processing
[Tidy 10:50:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:50:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:50:47 INFO] resetting WatchDogTimer
[Status 10:50:47 INFO] Starting Set [AERI set: name Z198, 6 scans, 0 angle, D16300 command]
[Ingest 10:50:47 INFO] Sending XML status message
[Status 10:50:47 INFO] Mirror angle: 0
[Mirror 10:50:48 INFO] rotating to position Z
[Status 10:50:48 INFO] .SET file for ACQ96 ready
[Ingest 10:50:48 INFO] Starting acquisition
[Status 10:50:49 INFO] reading housekeeping
[Status 10:51:07 INFO] acquire complete
[Status 10:51:07 INFO] writing housekeeping
[Sequencer 10:51:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:51:07 INFO] incremented Z scene to 198 completed views
[Sequencer 10:51:07 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:51:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:51:07 INFO] incremented to [AERI set: name H199, 6 scans, 60 angle, D22500 command] set
[sigmove 10:51:07 INFO] Z198.SIG(18)
[sigmove 10:51:07 DEBUG] transformed Z198Ma.SPC -> Z198MA.SPC
[sigmove 10:51:07 DEBUG] transformed Z198Mb.SPC -> Z198MB.SPC
[sigmove 10:51:07 DEBUG] transformed Z198Mc.SPC -> Z198MC.SPC
[sigmove 10:51:07 DEBUG] transformed Z198Md.SPC -> Z198MD.SPC
[sigmove 10:51:07 DEBUG] transformed Z198Me.SPC -> Z198ME.SPC
[sigmove 10:51:07 DEBUG] transformed Z198Mf.SPC -> Z198MF.SPC
[Status 10:51:07 INFO] data for Z198 transferred to science data processing
[Tidy 10:51:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:51:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:51:07 INFO] resetting WatchDogTimer
[Status 10:51:08 INFO] Starting Set [AERI set: name H199, 6 scans, 60 angle, D22500 command]
[Ingest 10:51:08 INFO] Sending XML status message
[Status 10:51:08 INFO] Mirror angle: 60
[Mirror 10:51:08 INFO] rotating to position H
[Status 10:51:09 INFO] .SET file for ACQ96 ready
[Ingest 10:51:09 INFO] Starting acquisition
[Status 10:51:09 INFO] reading housekeeping
[Status 10:51:27 INFO] acquire complete
[Status 10:51:28 INFO] writing housekeeping
[Sequencer 10:51:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:51:28 INFO] incremented H scene to 199 completed views
[Sequencer 10:51:28 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:51:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:51:28 INFO] incremented to [AERI set: name A199, 6 scans, 120 angle, D28300 command] set
[sigmove 10:51:28 INFO] H199.SIG(18)
[sigmove 10:51:28 DEBUG] transformed H199Ma.SPC -> H199MA.SPC
[sigmove 10:51:28 DEBUG] transformed H199Mb.SPC -> H199MB.SPC
[sigmove 10:51:28 DEBUG] transformed H199Mc.SPC -> H199MC.SPC
[sigmove 10:51:28 DEBUG] transformed H199Md.SPC -> H199MD.SPC
[sigmove 10:51:28 DEBUG] transformed H199Me.SPC -> H199ME.SPC
[sigmove 10:51:28 DEBUG] transformed H199Mf.SPC -> H199MF.SPC
[Status 10:51:28 INFO] data for H199 transferred to science data processing
[Tidy 10:51:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:51:28 INFO] A197.FIN(19),H197.FIN(19),S197.FIN(19),T197.FIN(19),U197.FIN(19),V197.FIN(19),W197.FIN(19),X197.FIN(19),Y197.FIN(19),Z197.FIN(19),A198.FIN(19),H198.FIN(19),S198.FIN(19),T198.FIN(19),U198.FIN(19),V198.FIN(19),W198.FIN(19),X198.FIN(19),Y198.FIN(19),Z198.FIN(19)
[sigmove 10:51:28 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:51:28 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:51:31 DEBUG] done zipping
[WatchDog 10:51:31 INFO] resetting WatchDogTimer
[Status 10:51:32 INFO] Starting Set [AERI set: name A199, 6 scans, 120 angle, D28300 command]
[Ingest 10:51:32 INFO] Sending XML status message
[Status 10:51:32 INFO] Mirror angle: 120
[Mirror 10:51:32 INFO] rotating to position A
[Status 10:51:33 INFO] .SET file for ACQ96 ready
[Ingest 10:51:33 INFO] Starting acquisition
[Status 10:51:33 INFO] reading housekeeping
[Status 10:51:51 INFO] acquire complete
[Status 10:51:52 INFO] writing housekeeping
[Sequencer 10:51:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:51:52 INFO] incremented A scene to 199 completed views
[Sequencer 10:51:52 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:51:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:51:52 INFO] incremented to [AERI set: name S199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:51:52 INFO] A199.SIG(18)
[sigmove 10:51:52 DEBUG] transformed A199Ma.SPC -> A199MA.SPC
[sigmove 10:51:52 DEBUG] transformed A199Mb.SPC -> A199MB.SPC
[sigmove 10:51:52 DEBUG] transformed A199Mc.SPC -> A199MC.SPC
[sigmove 10:51:52 DEBUG] transformed A199Md.SPC -> A199MD.SPC
[sigmove 10:51:52 DEBUG] transformed A199Me.SPC -> A199ME.SPC
[sigmove 10:51:52 DEBUG] transformed A199Mf.SPC -> A199MF.SPC
[Status 10:51:52 INFO] data for A199 transferred to science data processing
[Tidy 10:51:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:51:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:51:52 INFO] resetting WatchDogTimer
[Status 10:51:53 INFO] Starting Set [AERI set: name S199, 6 scans, 0 angle, D16300 command]
[Ingest 10:51:53 INFO] Sending XML status message
[Status 10:51:53 INFO] Mirror angle: 0
[Mirror 10:51:53 INFO] rotating to position S
[Status 10:51:54 INFO] .SET file for ACQ96 ready
[Ingest 10:51:54 INFO] Starting acquisition
[Status 10:51:55 INFO] reading housekeeping
[Status 10:52:13 INFO] acquire complete
[Status 10:52:14 INFO] writing housekeeping
[Sequencer 10:52:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:52:14 INFO] incremented S scene to 199 completed views
[Sequencer 10:52:14 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:52:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:52:14 INFO] incremented to [AERI set: name T199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:52:14 INFO] S199.SIG(18)
[sigmove 10:52:14 DEBUG] transformed S199Ma.SPC -> S199MA.SPC
[sigmove 10:52:14 DEBUG] transformed S199Mb.SPC -> S199MB.SPC
[sigmove 10:52:14 DEBUG] transformed S199Mc.SPC -> S199MC.SPC
[sigmove 10:52:14 DEBUG] transformed S199Md.SPC -> S199MD.SPC
[sigmove 10:52:14 DEBUG] transformed S199Me.SPC -> S199ME.SPC
[sigmove 10:52:14 DEBUG] transformed S199Mf.SPC -> S199MF.SPC
[Status 10:52:14 INFO] data for S199 transferred to science data processing
[Tidy 10:52:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:52:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:52:14 INFO] resetting WatchDogTimer
[Status 10:52:14 INFO] Starting Set [AERI set: name T199, 6 scans, 0 angle, D16300 command]
[Ingest 10:52:14 INFO] Sending XML status message
[Status 10:52:14 INFO] Mirror angle: 0
[Mirror 10:52:14 INFO] rotating to position T
[Status 10:52:15 INFO] .SET file for ACQ96 ready
[Ingest 10:52:15 INFO] Starting acquisition
[Status 10:52:15 INFO] reading housekeeping
[Status 10:52:33 INFO] acquire complete
[Status 10:52:34 INFO] writing housekeeping
[Sequencer 10:52:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:52:34 INFO] incremented T scene to 199 completed views
[Sequencer 10:52:34 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:52:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:52:34 INFO] incremented to [AERI set: name U199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:52:34 INFO] T199.SIG(18)
[sigmove 10:52:34 DEBUG] transformed T199Ma.SPC -> T199MA.SPC
[sigmove 10:52:34 DEBUG] transformed T199Mb.SPC -> T199MB.SPC
[sigmove 10:52:34 DEBUG] transformed T199Mc.SPC -> T199MC.SPC
[sigmove 10:52:34 DEBUG] transformed T199Md.SPC -> T199MD.SPC
[sigmove 10:52:34 DEBUG] transformed T199Me.SPC -> T199ME.SPC
[sigmove 10:52:34 DEBUG] transformed T199Mf.SPC -> T199MF.SPC
[Status 10:52:34 INFO] data for T199 transferred to science data processing
[Tidy 10:52:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:52:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:52:34 INFO] resetting WatchDogTimer
[Status 10:52:34 INFO] Starting Set [AERI set: name U199, 6 scans, 0 angle, D16300 command]
[Ingest 10:52:34 INFO] Sending XML status message
[Status 10:52:34 INFO] Mirror angle: 0
[Mirror 10:52:34 INFO] rotating to position U
[Status 10:52:35 INFO] .SET file for ACQ96 ready
[Ingest 10:52:35 INFO] Starting acquisition
[Status 10:52:35 INFO] reading housekeeping
[Status 10:52:53 INFO] acquire complete
[Status 10:52:54 INFO] writing housekeeping
[Sequencer 10:52:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:52:54 INFO] incremented U scene to 199 completed views
[Sequencer 10:52:54 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:52:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:52:54 INFO] incremented to [AERI set: name V199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:52:54 INFO] U199.SIG(18)
[sigmove 10:52:54 DEBUG] transformed U199Ma.SPC -> U199MA.SPC
[sigmove 10:52:54 DEBUG] transformed U199Mb.SPC -> U199MB.SPC
[sigmove 10:52:54 DEBUG] transformed U199Mc.SPC -> U199MC.SPC
[sigmove 10:52:54 DEBUG] transformed U199Md.SPC -> U199MD.SPC
[sigmove 10:52:54 DEBUG] transformed U199Me.SPC -> U199ME.SPC
[sigmove 10:52:54 DEBUG] transformed U199Mf.SPC -> U199MF.SPC
[Status 10:52:54 INFO] data for U199 transferred to science data processing
[Tidy 10:52:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:52:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:52:54 INFO] resetting WatchDogTimer
[Status 10:52:54 INFO] Starting Set [AERI set: name V199, 6 scans, 0 angle, D16300 command]
[Ingest 10:52:54 INFO] Sending XML status message
[Status 10:52:54 INFO] Mirror angle: 0
[Mirror 10:52:55 INFO] rotating to position V
[Status 10:52:55 INFO] .SET file for ACQ96 ready
[Ingest 10:52:55 INFO] Starting acquisition
[Status 10:52:55 INFO] reading housekeeping
[Status 10:53:13 INFO] acquire complete
[Status 10:53:14 INFO] writing housekeeping
[Sequencer 10:53:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:53:14 INFO] incremented V scene to 199 completed views
[Sequencer 10:53:14 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:53:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:53:14 INFO] incremented to [AERI set: name W199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:53:14 INFO] V199.SIG(18)
[sigmove 10:53:14 DEBUG] transformed V199Ma.SPC -> V199MA.SPC
[sigmove 10:53:14 DEBUG] transformed V199Mb.SPC -> V199MB.SPC
[sigmove 10:53:14 DEBUG] transformed V199Mc.SPC -> V199MC.SPC
[sigmove 10:53:14 DEBUG] transformed V199Md.SPC -> V199MD.SPC
[sigmove 10:53:14 DEBUG] transformed V199Me.SPC -> V199ME.SPC
[sigmove 10:53:14 DEBUG] transformed V199Mf.SPC -> V199MF.SPC
[Status 10:53:14 INFO] data for V199 transferred to science data processing
[Tidy 10:53:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:53:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:53:14 INFO] resetting WatchDogTimer
[Status 10:53:14 INFO] Starting Set [AERI set: name W199, 6 scans, 0 angle, D16300 command]
[Ingest 10:53:14 INFO] Sending XML status message
[Status 10:53:14 INFO] Mirror angle: 0
[Mirror 10:53:15 INFO] rotating to position W
[Status 10:53:15 INFO] .SET file for ACQ96 ready
[Ingest 10:53:15 INFO] Starting acquisition
[Status 10:53:16 INFO] reading housekeeping
[Status 10:53:34 INFO] acquire complete
[Status 10:53:34 INFO] writing housekeeping
[Sequencer 10:53:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:53:34 INFO] incremented W scene to 199 completed views
[Sequencer 10:53:34 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:53:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:53:34 INFO] incremented to [AERI set: name X199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:53:34 INFO] W199.SIG(18)
[sigmove 10:53:34 DEBUG] transformed W199Ma.SPC -> W199MA.SPC
[sigmove 10:53:34 DEBUG] transformed W199Mb.SPC -> W199MB.SPC
[sigmove 10:53:34 DEBUG] transformed W199Mc.SPC -> W199MC.SPC
[sigmove 10:53:34 DEBUG] transformed W199Md.SPC -> W199MD.SPC
[sigmove 10:53:34 DEBUG] transformed W199Me.SPC -> W199ME.SPC
[sigmove 10:53:34 DEBUG] transformed W199Mf.SPC -> W199MF.SPC
[Status 10:53:34 INFO] data for W199 transferred to science data processing
[Tidy 10:53:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:53:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:53:34 INFO] resetting WatchDogTimer
[Status 10:53:35 INFO] Starting Set [AERI set: name X199, 6 scans, 0 angle, D16300 command]
[Ingest 10:53:35 INFO] Sending XML status message
[Status 10:53:35 INFO] Mirror angle: 0
[Mirror 10:53:35 INFO] rotating to position X
[Status 10:53:35 INFO] .SET file for ACQ96 ready
[Ingest 10:53:36 INFO] Starting acquisition
[Status 10:53:36 INFO] reading housekeeping
[Status 10:53:54 INFO] acquire complete
[Status 10:53:55 INFO] writing housekeeping
[Sequencer 10:53:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:53:55 INFO] incremented X scene to 199 completed views
[Sequencer 10:53:55 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:53:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:53:55 INFO] incremented to [AERI set: name Y199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:53:55 INFO] X199.SIG(18)
[sigmove 10:53:55 DEBUG] transformed X199Ma.SPC -> X199MA.SPC
[sigmove 10:53:55 DEBUG] transformed X199Mb.SPC -> X199MB.SPC
[sigmove 10:53:55 DEBUG] transformed X199Mc.SPC -> X199MC.SPC
[sigmove 10:53:55 DEBUG] transformed X199Md.SPC -> X199MD.SPC
[sigmove 10:53:55 DEBUG] transformed X199Me.SPC -> X199ME.SPC
[sigmove 10:53:55 DEBUG] transformed X199Mf.SPC -> X199MF.SPC
[Status 10:53:55 INFO] data for X199 transferred to science data processing
[Tidy 10:53:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:53:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:53:55 INFO] resetting WatchDogTimer
[Status 10:53:55 INFO] Starting Set [AERI set: name Y199, 6 scans, 0 angle, D16300 command]
[Ingest 10:53:55 INFO] Sending XML status message
[Status 10:53:55 INFO] Mirror angle: 0
[Mirror 10:53:55 INFO] rotating to position Y
[Status 10:53:55 INFO] .SET file for ACQ96 ready
[Ingest 10:53:56 INFO] Starting acquisition
[Status 10:53:56 INFO] reading housekeeping
[Status 10:54:14 INFO] acquire complete
[Status 10:54:15 INFO] writing housekeeping
[Sequencer 10:54:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:54:15 INFO] incremented Y scene to 199 completed views
[Sequencer 10:54:15 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:54:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:54:15 INFO] incremented to [AERI set: name Z199, 6 scans, 0 angle, D16300 command] set
[sigmove 10:54:15 INFO] Y199.SIG(18)
[sigmove 10:54:15 DEBUG] transformed Y199Ma.SPC -> Y199MA.SPC
[sigmove 10:54:15 DEBUG] transformed Y199Mb.SPC -> Y199MB.SPC
[sigmove 10:54:15 DEBUG] transformed Y199Mc.SPC -> Y199MC.SPC
[sigmove 10:54:15 DEBUG] transformed Y199Md.SPC -> Y199MD.SPC
[sigmove 10:54:15 DEBUG] transformed Y199Me.SPC -> Y199ME.SPC
[sigmove 10:54:15 DEBUG] transformed Y199Mf.SPC -> Y199MF.SPC
[Status 10:54:15 INFO] data for Y199 transferred to science data processing
[Tidy 10:54:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:54:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:54:15 INFO] resetting WatchDogTimer
[Status 10:54:15 INFO] Starting Set [AERI set: name Z199, 6 scans, 0 angle, D16300 command]
[Ingest 10:54:15 INFO] Sending XML status message
[Status 10:54:15 INFO] Mirror angle: 0
[Mirror 10:54:15 INFO] rotating to position Z
[Status 10:54:16 INFO] .SET file for ACQ96 ready
[Ingest 10:54:16 INFO] Starting acquisition
[Status 10:54:16 INFO] reading housekeeping
[Status 10:54:34 INFO] acquire complete
[Status 10:54:35 INFO] writing housekeeping
[Sequencer 10:54:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:54:35 INFO] incremented Z scene to 199 completed views
[Sequencer 10:54:35 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:54:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:54:35 INFO] incremented to [AERI set: name A200, 6 scans, 120 angle, D28300 command] set
[sigmove 10:54:35 INFO] Z199.SIG(18)
[sigmove 10:54:35 DEBUG] transformed Z199Ma.SPC -> Z199MA.SPC
[sigmove 10:54:35 DEBUG] transformed Z199Mb.SPC -> Z199MB.SPC
[sigmove 10:54:35 DEBUG] transformed Z199Mc.SPC -> Z199MC.SPC
[sigmove 10:54:35 DEBUG] transformed Z199Md.SPC -> Z199MD.SPC
[sigmove 10:54:35 DEBUG] transformed Z199Me.SPC -> Z199ME.SPC
[sigmove 10:54:35 DEBUG] transformed Z199Mf.SPC -> Z199MF.SPC
[Status 10:54:35 INFO] data for Z199 transferred to science data processing
[Tidy 10:54:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:54:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:54:35 INFO] resetting WatchDogTimer
[Status 10:54:35 INFO] Starting Set [AERI set: name A200, 6 scans, 120 angle, D28300 command]
[Ingest 10:54:35 INFO] Sending XML status message
[Status 10:54:35 INFO] Mirror angle: 120
[Mirror 10:54:35 INFO] rotating to position A
[Status 10:54:37 INFO] .SET file for ACQ96 ready
[Ingest 10:54:37 INFO] Starting acquisition
[Status 10:54:37 INFO] reading housekeeping
[Status 10:54:55 INFO] acquire complete
[Status 10:54:56 INFO] writing housekeeping
[Sequencer 10:54:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:54:56 INFO] incremented A scene to 200 completed views
[Sequencer 10:54:56 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:54:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:54:56 INFO] incremented to [AERI set: name H200, 6 scans, 60 angle, D22500 command] set
[sigmove 10:54:56 INFO] A200.SIG(18)
[sigmove 10:54:56 DEBUG] transformed A200Ma.SPC -> A200MA.SPC
[sigmove 10:54:56 DEBUG] transformed A200Mb.SPC -> A200MB.SPC
[sigmove 10:54:56 DEBUG] transformed A200Mc.SPC -> A200MC.SPC
[sigmove 10:54:56 DEBUG] transformed A200Md.SPC -> A200MD.SPC
[sigmove 10:54:56 DEBUG] transformed A200Me.SPC -> A200ME.SPC
[sigmove 10:54:56 DEBUG] transformed A200Mf.SPC -> A200MF.SPC
[Status 10:54:56 INFO] data for A200 transferred to science data processing
[Tidy 10:54:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:54:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:54:56 INFO] resetting WatchDogTimer
[Status 10:54:57 INFO] Starting Set [AERI set: name H200, 6 scans, 60 angle, D22500 command]
[Ingest 10:54:57 INFO] Sending XML status message
[Status 10:54:57 INFO] Mirror angle: 60
[Mirror 10:54:57 INFO] rotating to position H
[Status 10:54:58 INFO] .SET file for ACQ96 ready
[Ingest 10:54:58 INFO] Starting acquisition
[Status 10:54:58 INFO] reading housekeeping
[Status 10:55:17 INFO] acquire complete
[Status 10:55:18 INFO] writing housekeeping
[Sequencer 10:55:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:55:18 INFO] incremented H scene to 200 completed views
[Sequencer 10:55:18 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:55:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:55:18 INFO] incremented to [AERI set: name S200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:55:18 INFO] H200.SIG(18)
[sigmove 10:55:18 DEBUG] transformed H200Ma.SPC -> H200MA.SPC
[sigmove 10:55:18 DEBUG] transformed H200Mb.SPC -> H200MB.SPC
[sigmove 10:55:18 DEBUG] transformed H200Mc.SPC -> H200MC.SPC
[sigmove 10:55:18 DEBUG] transformed H200Md.SPC -> H200MD.SPC
[sigmove 10:55:18 DEBUG] transformed H200Me.SPC -> H200ME.SPC
[sigmove 10:55:18 DEBUG] transformed H200Mf.SPC -> H200MF.SPC
[Status 10:55:18 INFO] data for H200 transferred to science data processing
[Tidy 10:55:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:55:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:55:18 INFO] resetting WatchDogTimer
[Status 10:55:18 INFO] Starting Set [AERI set: name S200, 6 scans, 0 angle, D16300 command]
[Ingest 10:55:18 INFO] Sending XML status message
[Status 10:55:18 INFO] Mirror angle: 0
[Mirror 10:55:18 INFO] rotating to position S
[Status 10:55:19 INFO] .SET file for ACQ96 ready
[Ingest 10:55:19 INFO] Starting acquisition
[Status 10:55:20 INFO] reading housekeeping
[Status 10:55:41 INFO] acquire complete
[Status 10:55:42 INFO] writing housekeeping
[Sequencer 10:55:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:55:42 INFO] incremented S scene to 200 completed views
[Sequencer 10:55:42 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:55:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:55:42 INFO] incremented to [AERI set: name T200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:55:42 INFO] S200.SIG(18)
[sigmove 10:55:42 DEBUG] transformed S200Ma.SPC -> S200MA.SPC
[sigmove 10:55:42 DEBUG] transformed S200Mb.SPC -> S200MB.SPC
[sigmove 10:55:42 DEBUG] transformed S200Mc.SPC -> S200MC.SPC
[sigmove 10:55:42 DEBUG] transformed S200Md.SPC -> S200MD.SPC
[sigmove 10:55:42 DEBUG] transformed S200Me.SPC -> S200ME.SPC
[sigmove 10:55:42 DEBUG] transformed S200Mf.SPC -> S200MF.SPC
[Status 10:55:42 INFO] data for S200 transferred to science data processing
[Tidy 10:55:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:55:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:55:42 INFO] resetting WatchDogTimer
[Status 10:55:42 INFO] Starting Set [AERI set: name T200, 6 scans, 0 angle, D16300 command]
[Ingest 10:55:42 INFO] Sending XML status message
[Status 10:55:42 INFO] Mirror angle: 0
[Mirror 10:55:43 INFO] rotating to position T
[Status 10:55:43 INFO] .SET file for ACQ96 ready
[Ingest 10:55:44 INFO] Starting acquisition
[Status 10:55:44 INFO] reading housekeeping
[Status 10:56:02 INFO] acquire complete
[Status 10:56:02 INFO] writing housekeeping
[Sequencer 10:56:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:56:02 INFO] incremented T scene to 200 completed views
[Sequencer 10:56:02 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:56:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:56:02 INFO] incremented to [AERI set: name U200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:56:02 INFO] T200.SIG(18)
[sigmove 10:56:02 DEBUG] transformed T200Ma.SPC -> T200MA.SPC
[sigmove 10:56:02 DEBUG] transformed T200Mb.SPC -> T200MB.SPC
[sigmove 10:56:02 DEBUG] transformed T200Mc.SPC -> T200MC.SPC
[sigmove 10:56:02 DEBUG] transformed T200Md.SPC -> T200MD.SPC
[sigmove 10:56:02 DEBUG] transformed T200Me.SPC -> T200ME.SPC
[sigmove 10:56:02 DEBUG] transformed T200Mf.SPC -> T200MF.SPC
[Status 10:56:02 INFO] data for T200 transferred to science data processing
[Tidy 10:56:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:56:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:56:02 INFO] resetting WatchDogTimer
[Status 10:56:03 INFO] Starting Set [AERI set: name U200, 6 scans, 0 angle, D16300 command]
[Ingest 10:56:03 INFO] Sending XML status message
[Status 10:56:03 INFO] Mirror angle: 0
[Mirror 10:56:03 INFO] rotating to position U
[Status 10:56:03 INFO] .SET file for ACQ96 ready
[Ingest 10:56:04 INFO] Starting acquisition
[Status 10:56:04 INFO] reading housekeeping
[Status 10:56:22 INFO] acquire complete
[Status 10:56:23 INFO] writing housekeeping
[Sequencer 10:56:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:56:23 INFO] incremented U scene to 200 completed views
[Sequencer 10:56:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:56:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:56:23 INFO] incremented to [AERI set: name V200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:56:23 INFO] U200.SIG(18)
[sigmove 10:56:23 DEBUG] transformed U200Ma.SPC -> U200MA.SPC
[sigmove 10:56:23 DEBUG] transformed U200Mb.SPC -> U200MB.SPC
[sigmove 10:56:23 DEBUG] transformed U200Mc.SPC -> U200MC.SPC
[sigmove 10:56:23 DEBUG] transformed U200Md.SPC -> U200MD.SPC
[sigmove 10:56:23 DEBUG] transformed U200Me.SPC -> U200ME.SPC
[sigmove 10:56:23 DEBUG] transformed U200Mf.SPC -> U200MF.SPC
[Status 10:56:23 INFO] data for U200 transferred to science data processing
[Tidy 10:56:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:56:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:56:23 INFO] resetting WatchDogTimer
[Status 10:56:23 INFO] Starting Set [AERI set: name V200, 6 scans, 0 angle, D16300 command]
[Ingest 10:56:23 INFO] Sending XML status message
[Status 10:56:23 INFO] Mirror angle: 0
[Mirror 10:56:23 INFO] rotating to position V
[Status 10:56:24 INFO] .SET file for ACQ96 ready
[Ingest 10:56:24 INFO] Starting acquisition
[Status 10:56:24 INFO] reading housekeeping
[Status 10:56:42 INFO] acquire complete
[Status 10:56:43 INFO] writing housekeeping
[Sequencer 10:56:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:56:43 INFO] incremented V scene to 200 completed views
[Sequencer 10:56:43 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:56:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:56:43 INFO] incremented to [AERI set: name W200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:56:43 INFO] V200.SIG(18)
[sigmove 10:56:43 DEBUG] transformed V200Ma.SPC -> V200MA.SPC
[sigmove 10:56:43 DEBUG] transformed V200Mb.SPC -> V200MB.SPC
[sigmove 10:56:43 DEBUG] transformed V200Mc.SPC -> V200MC.SPC
[sigmove 10:56:43 DEBUG] transformed V200Md.SPC -> V200MD.SPC
[sigmove 10:56:43 DEBUG] transformed V200Me.SPC -> V200ME.SPC
[sigmove 10:56:43 DEBUG] transformed V200Mf.SPC -> V200MF.SPC
[Status 10:56:43 INFO] data for V200 transferred to science data processing
[Tidy 10:56:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:56:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:56:43 INFO] resetting WatchDogTimer
[Status 10:56:43 INFO] Starting Set [AERI set: name W200, 6 scans, 0 angle, D16300 command]
[Ingest 10:56:43 INFO] Sending XML status message
[Status 10:56:43 INFO] Mirror angle: 0
[Mirror 10:56:43 INFO] rotating to position W
[Status 10:56:44 INFO] .SET file for ACQ96 ready
[Ingest 10:56:44 INFO] Starting acquisition
[Status 10:56:44 INFO] reading housekeeping
[Status 10:57:02 INFO] acquire complete
[Status 10:57:03 INFO] writing housekeeping
[Sequencer 10:57:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:57:03 INFO] incremented W scene to 200 completed views
[Sequencer 10:57:03 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:57:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:57:03 INFO] incremented to [AERI set: name X200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:57:03 INFO] W200.SIG(18)
[sigmove 10:57:03 DEBUG] transformed W200Ma.SPC -> W200MA.SPC
[sigmove 10:57:03 DEBUG] transformed W200Mb.SPC -> W200MB.SPC
[sigmove 10:57:03 DEBUG] transformed W200Mc.SPC -> W200MC.SPC
[sigmove 10:57:03 DEBUG] transformed W200Md.SPC -> W200MD.SPC
[sigmove 10:57:03 DEBUG] transformed W200Me.SPC -> W200ME.SPC
[sigmove 10:57:03 DEBUG] transformed W200Mf.SPC -> W200MF.SPC
[Status 10:57:03 INFO] data for W200 transferred to science data processing
[Tidy 10:57:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:57:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:57:03 INFO] resetting WatchDogTimer
[Status 10:57:03 INFO] Starting Set [AERI set: name X200, 6 scans, 0 angle, D16300 command]
[Ingest 10:57:03 INFO] Sending XML status message
[Status 10:57:03 INFO] Mirror angle: 0
[Mirror 10:57:04 INFO] rotating to position X
[Status 10:57:04 INFO] .SET file for ACQ96 ready
[Ingest 10:57:04 INFO] Starting acquisition
[Status 10:57:05 INFO] reading housekeeping
[Status 10:57:22 INFO] acquire complete
[Status 10:57:23 INFO] writing housekeeping
[Sequencer 10:57:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:57:23 INFO] incremented X scene to 200 completed views
[Sequencer 10:57:23 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:57:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:57:23 INFO] incremented to [AERI set: name Y200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:57:23 INFO] X200.SIG(18)
[sigmove 10:57:23 DEBUG] transformed X200Ma.SPC -> X200MA.SPC
[sigmove 10:57:23 DEBUG] transformed X200Mb.SPC -> X200MB.SPC
[sigmove 10:57:23 DEBUG] transformed X200Mc.SPC -> X200MC.SPC
[sigmove 10:57:23 DEBUG] transformed X200Md.SPC -> X200MD.SPC
[sigmove 10:57:23 DEBUG] transformed X200Me.SPC -> X200ME.SPC
[sigmove 10:57:23 DEBUG] transformed X200Mf.SPC -> X200MF.SPC
[Status 10:57:23 INFO] data for X200 transferred to science data processing
[Tidy 10:57:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:57:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:57:23 INFO] resetting WatchDogTimer
[Status 10:57:23 INFO] Starting Set [AERI set: name Y200, 6 scans, 0 angle, D16300 command]
[Ingest 10:57:23 INFO] Sending XML status message
[Status 10:57:23 INFO] Mirror angle: 0
[Mirror 10:57:24 INFO] rotating to position Y
[Status 10:57:24 INFO] .SET file for ACQ96 ready
[Ingest 10:57:24 INFO] Starting acquisition
[Status 10:57:25 INFO] reading housekeeping
[Status 10:57:43 INFO] acquire complete
[Status 10:57:43 INFO] writing housekeeping
[Sequencer 10:57:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:57:43 INFO] incremented Y scene to 200 completed views
[Sequencer 10:57:43 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:57:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:57:43 INFO] incremented to [AERI set: name Z200, 6 scans, 0 angle, D16300 command] set
[sigmove 10:57:43 INFO] Y200.SIG(18)
[sigmove 10:57:43 DEBUG] transformed Y200Ma.SPC -> Y200MA.SPC
[sigmove 10:57:43 DEBUG] transformed Y200Mb.SPC -> Y200MB.SPC
[sigmove 10:57:43 DEBUG] transformed Y200Mc.SPC -> Y200MC.SPC
[sigmove 10:57:43 DEBUG] transformed Y200Md.SPC -> Y200MD.SPC
[sigmove 10:57:43 DEBUG] transformed Y200Me.SPC -> Y200ME.SPC
[sigmove 10:57:43 DEBUG] transformed Y200Mf.SPC -> Y200MF.SPC
[Status 10:57:43 INFO] data for Y200 transferred to science data processing
[Tidy 10:57:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:57:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:57:43 INFO] resetting WatchDogTimer
[Status 10:57:44 INFO] Starting Set [AERI set: name Z200, 6 scans, 0 angle, D16300 command]
[Ingest 10:57:44 INFO] Sending XML status message
[Status 10:57:44 INFO] Mirror angle: 0
[Mirror 10:57:44 INFO] rotating to position Z
[Status 10:57:44 INFO] .SET file for ACQ96 ready
[Ingest 10:57:45 INFO] Starting acquisition
[Status 10:57:45 INFO] reading housekeeping
[Status 10:58:03 INFO] acquire complete
[Status 10:58:04 INFO] writing housekeeping
[Sequencer 10:58:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:58:04 INFO] incremented Z scene to 200 completed views
[Sequencer 10:58:04 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 10:58:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:58:04 INFO] incremented to [AERI set: name H201, 6 scans, 60 angle, D22500 command] set
[sigmove 10:58:04 INFO] Z200.SIG(18)
[sigmove 10:58:04 DEBUG] transformed Z200Ma.SPC -> Z200MA.SPC
[sigmove 10:58:04 DEBUG] transformed Z200Mb.SPC -> Z200MB.SPC
[sigmove 10:58:04 DEBUG] transformed Z200Mc.SPC -> Z200MC.SPC
[sigmove 10:58:04 DEBUG] transformed Z200Md.SPC -> Z200MD.SPC
[sigmove 10:58:04 DEBUG] transformed Z200Me.SPC -> Z200ME.SPC
[sigmove 10:58:04 DEBUG] transformed Z200Mf.SPC -> Z200MF.SPC
[Status 10:58:04 INFO] data for Z200 transferred to science data processing
[Tidy 10:58:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:58:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:58:04 INFO] resetting WatchDogTimer
[Status 10:58:04 INFO] Starting Set [AERI set: name H201, 6 scans, 60 angle, D22500 command]
[Ingest 10:58:04 INFO] Sending XML status message
[Status 10:58:04 INFO] Mirror angle: 60
[Mirror 10:58:04 INFO] rotating to position H
[Status 10:58:05 INFO] .SET file for ACQ96 ready
[Ingest 10:58:05 INFO] Starting acquisition
[Status 10:58:06 INFO] reading housekeeping
[Status 10:58:23 INFO] acquire complete
[Status 10:58:24 INFO] writing housekeeping
[Sequencer 10:58:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:58:24 INFO] incremented H scene to 201 completed views
[Sequencer 10:58:24 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 10:58:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:58:24 INFO] incremented to [AERI set: name A201, 6 scans, 120 angle, D28300 command] set
[sigmove 10:58:24 INFO] H201.SIG(18)
[sigmove 10:58:24 DEBUG] transformed H201Ma.SPC -> H201MA.SPC
[sigmove 10:58:24 DEBUG] transformed H201Mb.SPC -> H201MB.SPC
[sigmove 10:58:24 DEBUG] transformed H201Mc.SPC -> H201MC.SPC
[sigmove 10:58:24 DEBUG] transformed H201Md.SPC -> H201MD.SPC
[sigmove 10:58:24 DEBUG] transformed H201Me.SPC -> H201ME.SPC
[sigmove 10:58:24 DEBUG] transformed H201Mf.SPC -> H201MF.SPC
[Status 10:58:24 INFO] data for H201 transferred to science data processing
[Tidy 10:58:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:58:24 INFO] A199.FIN(19),H199.FIN(19),S199.FIN(19),T199.FIN(19),U199.FIN(19),V199.FIN(19),W199.FIN(19),X199.FIN(19),Y199.FIN(19),Z199.FIN(19),A200.FIN(19),H200.FIN(19),S200.FIN(19),T200.FIN(19),U200.FIN(19),V200.FIN(19),W200.FIN(19),X200.FIN(19),Y200.FIN(19),Z200.FIN(19)
[sigmove 10:58:24 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:58:24 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 10:58:27 DEBUG] done zipping
[WatchDog 10:58:28 INFO] resetting WatchDogTimer
[Status 10:58:28 INFO] Starting Set [AERI set: name A201, 6 scans, 120 angle, D28300 command]
[Ingest 10:58:28 INFO] Sending XML status message
[Status 10:58:28 INFO] Mirror angle: 120
[Mirror 10:58:28 INFO] rotating to position A
[Status 10:58:29 INFO] .SET file for ACQ96 ready
[Ingest 10:58:29 INFO] Starting acquisition
[Status 10:58:30 INFO] reading housekeeping
[Status 10:58:48 INFO] acquire complete
[Status 10:58:48 INFO] writing housekeeping
[Sequencer 10:58:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:58:48 INFO] incremented A scene to 201 completed views
[Sequencer 10:58:48 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 10:58:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:58:48 INFO] incremented to [AERI set: name S201, 6 scans, 0 angle, D16300 command] set
[sigmove 10:58:48 INFO] A201.SIG(18)
[sigmove 10:58:48 DEBUG] transformed A201Ma.SPC -> A201MA.SPC
[sigmove 10:58:48 DEBUG] transformed A201Mb.SPC -> A201MB.SPC
[sigmove 10:58:48 DEBUG] transformed A201Mc.SPC -> A201MC.SPC
[sigmove 10:58:48 DEBUG] transformed A201Md.SPC -> A201MD.SPC
[sigmove 10:58:48 DEBUG] transformed A201Me.SPC -> A201ME.SPC
[sigmove 10:58:48 DEBUG] transformed A201Mf.SPC -> A201MF.SPC
[Status 10:58:48 INFO] data for A201 transferred to science data processing
[Tidy 10:58:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:58:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:58:48 INFO] resetting WatchDogTimer
[Status 10:58:49 INFO] Starting Set [AERI set: name S201, 6 scans, 0 angle, D16300 command]
[Ingest 10:58:49 INFO] Sending XML status message
[Status 10:58:49 INFO] Mirror angle: 0
[Mirror 10:58:49 INFO] rotating to position S
[Status 10:58:50 INFO] .SET file for ACQ96 ready
[Ingest 10:58:51 INFO] Starting acquisition
[Status 10:58:51 INFO] reading housekeeping
[Status 10:59:09 INFO] acquire complete
[Status 10:59:10 INFO] writing housekeeping
[Sequencer 10:59:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:59:10 INFO] incremented S scene to 201 completed views
[Sequencer 10:59:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:59:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:59:10 INFO] incremented to [AERI set: name T201, 6 scans, 0 angle, D16300 command] set
[sigmove 10:59:10 INFO] S201.SIG(18)
[sigmove 10:59:10 DEBUG] transformed S201Ma.SPC -> S201MA.SPC
[sigmove 10:59:10 DEBUG] transformed S201Mb.SPC -> S201MB.SPC
[sigmove 10:59:10 DEBUG] transformed S201Mc.SPC -> S201MC.SPC
[sigmove 10:59:10 DEBUG] transformed S201Md.SPC -> S201MD.SPC
[sigmove 10:59:10 DEBUG] transformed S201Me.SPC -> S201ME.SPC
[sigmove 10:59:10 DEBUG] transformed S201Mf.SPC -> S201MF.SPC
[Status 10:59:10 INFO] data for S201 transferred to science data processing
[Tidy 10:59:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:59:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:59:10 INFO] resetting WatchDogTimer
[Status 10:59:10 INFO] Starting Set [AERI set: name T201, 6 scans, 0 angle, D16300 command]
[Ingest 10:59:10 INFO] Sending XML status message
[Status 10:59:10 INFO] Mirror angle: 0
[Mirror 10:59:10 INFO] rotating to position T
[Status 10:59:11 INFO] .SET file for ACQ96 ready
[Ingest 10:59:11 INFO] Starting acquisition
[Status 10:59:11 INFO] reading housekeeping
[Status 10:59:29 INFO] acquire complete
[Status 10:59:30 INFO] writing housekeeping
[Sequencer 10:59:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:59:30 INFO] incremented T scene to 201 completed views
[Sequencer 10:59:30 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:59:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:59:30 INFO] incremented to [AERI set: name U201, 6 scans, 0 angle, D16300 command] set
[sigmove 10:59:30 INFO] T201.SIG(18)
[sigmove 10:59:30 DEBUG] transformed T201Ma.SPC -> T201MA.SPC
[sigmove 10:59:30 DEBUG] transformed T201Mb.SPC -> T201MB.SPC
[sigmove 10:59:30 DEBUG] transformed T201Mc.SPC -> T201MC.SPC
[sigmove 10:59:30 DEBUG] transformed T201Md.SPC -> T201MD.SPC
[sigmove 10:59:30 DEBUG] transformed T201Me.SPC -> T201ME.SPC
[sigmove 10:59:30 DEBUG] transformed T201Mf.SPC -> T201MF.SPC
[Status 10:59:30 INFO] data for T201 transferred to science data processing
[Tidy 10:59:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:59:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:59:30 INFO] resetting WatchDogTimer
[Status 10:59:30 INFO] Starting Set [AERI set: name U201, 6 scans, 0 angle, D16300 command]
[Ingest 10:59:30 INFO] Sending XML status message
[Status 10:59:30 INFO] Mirror angle: 0
[Mirror 10:59:30 INFO] rotating to position U
[Status 10:59:31 INFO] .SET file for ACQ96 ready
[Ingest 10:59:31 INFO] Starting acquisition
[Status 10:59:31 INFO] reading housekeeping
[Status 10:59:49 INFO] acquire complete
[Status 10:59:50 INFO] writing housekeeping
[Sequencer 10:59:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 10:59:50 INFO] incremented U scene to 201 completed views
[Sequencer 10:59:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 10:59:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 10:59:50 INFO] incremented to [AERI set: name V201, 6 scans, 0 angle, D16300 command] set
[sigmove 10:59:50 INFO] U201.SIG(18)
[sigmove 10:59:50 DEBUG] transformed U201Ma.SPC -> U201MA.SPC
[sigmove 10:59:50 DEBUG] transformed U201Mb.SPC -> U201MB.SPC
[sigmove 10:59:50 DEBUG] transformed U201Mc.SPC -> U201MC.SPC
[sigmove 10:59:50 DEBUG] transformed U201Md.SPC -> U201MD.SPC
[sigmove 10:59:50 DEBUG] transformed U201Me.SPC -> U201ME.SPC
[sigmove 10:59:50 DEBUG] transformed U201Mf.SPC -> U201MF.SPC
[Status 10:59:50 INFO] data for U201 transferred to science data processing
[Tidy 10:59:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 10:59:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 10:59:50 INFO] resetting WatchDogTimer
[Status 10:59:50 INFO] Starting Set [AERI set: name V201, 6 scans, 0 angle, D16300 command]
[Ingest 10:59:50 INFO] Sending XML status message
[Status 10:59:50 INFO] Mirror angle: 0
[Mirror 10:59:51 INFO] rotating to position V
[Status 10:59:51 INFO] .SET file for ACQ96 ready
[Ingest 10:59:51 INFO] Starting acquisition
[Status 10:59:52 INFO] reading housekeeping
[Status 11:00:10 INFO] acquire complete
[Status 11:00:10 INFO] writing housekeeping
[Sequencer 11:00:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:00:10 INFO] incremented V scene to 201 completed views
[Sequencer 11:00:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:00:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:00:10 INFO] incremented to [AERI set: name W201, 6 scans, 0 angle, D16300 command] set
[sigmove 11:00:10 INFO] V201.SIG(18)
[sigmove 11:00:10 DEBUG] transformed V201Ma.SPC -> V201MA.SPC
[sigmove 11:00:10 DEBUG] transformed V201Mb.SPC -> V201MB.SPC
[sigmove 11:00:10 DEBUG] transformed V201Mc.SPC -> V201MC.SPC
[sigmove 11:00:10 DEBUG] transformed V201Md.SPC -> V201MD.SPC
[sigmove 11:00:10 DEBUG] transformed V201Me.SPC -> V201ME.SPC
[sigmove 11:00:10 DEBUG] transformed V201Mf.SPC -> V201MF.SPC
[Status 11:00:10 INFO] data for V201 transferred to science data processing
[Tidy 11:00:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:00:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:00:10 INFO] resetting WatchDogTimer
[Status 11:00:11 INFO] Starting Set [AERI set: name W201, 6 scans, 0 angle, D16300 command]
[Ingest 11:00:11 INFO] Sending XML status message
[Status 11:00:11 INFO] Mirror angle: 0
[Mirror 11:00:11 INFO] rotating to position W
[Status 11:00:11 INFO] .SET file for ACQ96 ready
[Ingest 11:00:12 INFO] Starting acquisition
[Status 11:00:12 INFO] reading housekeeping
[Status 11:00:30 INFO] acquire complete
[Status 11:00:31 INFO] writing housekeeping
[Sequencer 11:00:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:00:31 INFO] incremented W scene to 201 completed views
[Sequencer 11:00:31 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:00:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:00:31 INFO] incremented to [AERI set: name X201, 6 scans, 0 angle, D16300 command] set
[sigmove 11:00:31 INFO] W201.SIG(18)
[sigmove 11:00:31 DEBUG] transformed W201Ma.SPC -> W201MA.SPC
[sigmove 11:00:31 DEBUG] transformed W201Mb.SPC -> W201MB.SPC
[sigmove 11:00:31 DEBUG] transformed W201Mc.SPC -> W201MC.SPC
[sigmove 11:00:31 DEBUG] transformed W201Md.SPC -> W201MD.SPC
[sigmove 11:00:31 DEBUG] transformed W201Me.SPC -> W201ME.SPC
[sigmove 11:00:31 DEBUG] transformed W201Mf.SPC -> W201MF.SPC
[Status 11:00:31 INFO] data for W201 transferred to science data processing
[Tidy 11:00:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:00:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:00:31 INFO] resetting WatchDogTimer
[Status 11:00:31 INFO] Starting Set [AERI set: name X201, 6 scans, 0 angle, D16300 command]
[Ingest 11:00:31 INFO] Sending XML status message
[Status 11:00:31 INFO] Mirror angle: 0
[Mirror 11:00:31 INFO] rotating to position X
[Status 11:00:31 INFO] .SET file for ACQ96 ready
[Ingest 11:00:32 INFO] Starting acquisition
[Status 11:00:32 INFO] reading housekeeping
[Status 11:00:50 INFO] acquire complete
[Status 11:00:51 INFO] writing housekeeping
[Sequencer 11:00:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:00:51 INFO] incremented X scene to 201 completed views
[Sequencer 11:00:51 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:00:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:00:51 INFO] incremented to [AERI set: name Y201, 6 scans, 0 angle, D16300 command] set
[sigmove 11:00:51 INFO] X201.SIG(18)
[sigmove 11:00:51 DEBUG] transformed X201Ma.SPC -> X201MA.SPC
[sigmove 11:00:51 DEBUG] transformed X201Mb.SPC -> X201MB.SPC
[sigmove 11:00:51 DEBUG] transformed X201Mc.SPC -> X201MC.SPC
[sigmove 11:00:51 DEBUG] transformed X201Md.SPC -> X201MD.SPC
[sigmove 11:00:51 DEBUG] transformed X201Me.SPC -> X201ME.SPC
[sigmove 11:00:51 DEBUG] transformed X201Mf.SPC -> X201MF.SPC
[Status 11:00:51 INFO] data for X201 transferred to science data processing
[Tidy 11:00:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:00:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:00:51 INFO] resetting WatchDogTimer
[Status 11:00:51 INFO] Starting Set [AERI set: name Y201, 6 scans, 0 angle, D16300 command]
[Ingest 11:00:51 INFO] Sending XML status message
[Status 11:00:51 INFO] Mirror angle: 0
[Mirror 11:00:51 INFO] rotating to position Y
[Status 11:00:52 INFO] .SET file for ACQ96 ready
[Ingest 11:00:52 INFO] Starting acquisition
[Status 11:00:52 INFO] reading housekeeping
[Status 11:01:10 INFO] acquire complete
[Status 11:01:11 INFO] writing housekeeping
[Sequencer 11:01:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:01:11 INFO] incremented Y scene to 201 completed views
[Sequencer 11:01:11 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:01:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:01:11 INFO] incremented to [AERI set: name Z201, 6 scans, 0 angle, D16300 command] set
[sigmove 11:01:11 INFO] Y201.SIG(18)
[sigmove 11:01:11 DEBUG] transformed Y201Ma.SPC -> Y201MA.SPC
[sigmove 11:01:11 DEBUG] transformed Y201Mb.SPC -> Y201MB.SPC
[sigmove 11:01:11 DEBUG] transformed Y201Mc.SPC -> Y201MC.SPC
[sigmove 11:01:11 DEBUG] transformed Y201Md.SPC -> Y201MD.SPC
[sigmove 11:01:11 DEBUG] transformed Y201Me.SPC -> Y201ME.SPC
[sigmove 11:01:11 DEBUG] transformed Y201Mf.SPC -> Y201MF.SPC
[Status 11:01:11 INFO] data for Y201 transferred to science data processing
[Tidy 11:01:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:01:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:01:11 INFO] resetting WatchDogTimer
[Status 11:01:11 INFO] Starting Set [AERI set: name Z201, 6 scans, 0 angle, D16300 command]
[Ingest 11:01:11 INFO] Sending XML status message
[Status 11:01:11 INFO] Mirror angle: 0
[Mirror 11:01:12 INFO] rotating to position Z
[Status 11:01:12 INFO] .SET file for ACQ96 ready
[Ingest 11:01:12 INFO] Starting acquisition
[Status 11:01:12 INFO] reading housekeeping
[Status 11:01:30 INFO] acquire complete
[Status 11:01:31 INFO] writing housekeeping
[Sequencer 11:01:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:01:31 INFO] incremented Z scene to 201 completed views
[Sequencer 11:01:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:01:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:01:31 INFO] incremented to [AERI set: name A202, 6 scans, 120 angle, D28300 command] set
[sigmove 11:01:31 INFO] Z201.SIG(18)
[sigmove 11:01:31 DEBUG] transformed Z201Ma.SPC -> Z201MA.SPC
[sigmove 11:01:31 DEBUG] transformed Z201Mb.SPC -> Z201MB.SPC
[sigmove 11:01:31 DEBUG] transformed Z201Mc.SPC -> Z201MC.SPC
[sigmove 11:01:31 DEBUG] transformed Z201Md.SPC -> Z201MD.SPC
[sigmove 11:01:31 DEBUG] transformed Z201Me.SPC -> Z201ME.SPC
[sigmove 11:01:31 DEBUG] transformed Z201Mf.SPC -> Z201MF.SPC
[Status 11:01:31 INFO] data for Z201 transferred to science data processing
[Tidy 11:01:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:01:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:01:31 INFO] resetting WatchDogTimer
[Status 11:01:31 INFO] Starting Set [AERI set: name A202, 6 scans, 120 angle, D28300 command]
[Ingest 11:01:31 INFO] Sending XML status message
[Status 11:01:31 INFO] Mirror angle: 120
[Mirror 11:01:32 INFO] rotating to position A
[Status 11:01:33 INFO] .SET file for ACQ96 ready
[Ingest 11:01:33 INFO] Starting acquisition
[Status 11:01:34 INFO] reading housekeeping
[Status 11:01:52 INFO] acquire complete
[Status 11:01:52 INFO] writing housekeeping
[Sequencer 11:01:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:01:52 INFO] incremented A scene to 202 completed views
[Sequencer 11:01:52 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:01:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:01:52 INFO] incremented to [AERI set: name H202, 6 scans, 60 angle, D22500 command] set
[sigmove 11:01:52 INFO] A202.SIG(18)
[sigmove 11:01:52 DEBUG] transformed A202Ma.SPC -> A202MA.SPC
[sigmove 11:01:52 DEBUG] transformed A202Mb.SPC -> A202MB.SPC
[sigmove 11:01:52 DEBUG] transformed A202Mc.SPC -> A202MC.SPC
[sigmove 11:01:52 DEBUG] transformed A202Md.SPC -> A202MD.SPC
[sigmove 11:01:52 DEBUG] transformed A202Me.SPC -> A202ME.SPC
[sigmove 11:01:52 DEBUG] transformed A202Mf.SPC -> A202MF.SPC
[Status 11:01:52 INFO] data for A202 transferred to science data processing
[Tidy 11:01:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:01:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:01:52 INFO] resetting WatchDogTimer
[Status 11:01:53 INFO] Starting Set [AERI set: name H202, 6 scans, 60 angle, D22500 command]
[Ingest 11:01:53 INFO] Sending XML status message
[Status 11:01:53 INFO] Mirror angle: 60
[Mirror 11:01:53 INFO] rotating to position H
[Status 11:01:54 INFO] .SET file for ACQ96 ready
[Ingest 11:01:54 INFO] Starting acquisition
[Status 11:01:54 INFO] reading housekeeping
[Status 11:02:12 INFO] acquire complete
[Status 11:02:13 INFO] writing housekeeping
[Sequencer 11:02:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:02:13 INFO] incremented H scene to 202 completed views
[Sequencer 11:02:13 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:02:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:02:13 INFO] incremented to [AERI set: name S202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:02:13 INFO] H202.SIG(18)
[sigmove 11:02:13 DEBUG] transformed H202Ma.SPC -> H202MA.SPC
[sigmove 11:02:13 DEBUG] transformed H202Mb.SPC -> H202MB.SPC
[sigmove 11:02:13 DEBUG] transformed H202Mc.SPC -> H202MC.SPC
[sigmove 11:02:13 DEBUG] transformed H202Md.SPC -> H202MD.SPC
[sigmove 11:02:13 DEBUG] transformed H202Me.SPC -> H202ME.SPC
[sigmove 11:02:13 DEBUG] transformed H202Mf.SPC -> H202MF.SPC
[Status 11:02:13 INFO] data for H202 transferred to science data processing
[Tidy 11:02:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:02:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:02:13 INFO] resetting WatchDogTimer
[Status 11:02:13 INFO] Starting Set [AERI set: name S202, 6 scans, 0 angle, D16300 command]
[Ingest 11:02:13 INFO] Sending XML status message
[Status 11:02:13 INFO] Mirror angle: 0
[Mirror 11:02:13 INFO] rotating to position S
[Status 11:02:14 INFO] .SET file for ACQ96 ready
[Ingest 11:02:14 INFO] Starting acquisition
[Status 11:02:15 INFO] reading housekeeping
[Status 11:02:32 INFO] acquire complete
[Status 11:02:33 INFO] writing housekeeping
[Sequencer 11:02:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:02:33 INFO] incremented S scene to 202 completed views
[Sequencer 11:02:33 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:02:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:02:33 INFO] incremented to [AERI set: name T202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:02:33 INFO] S202.SIG(18)
[sigmove 11:02:33 DEBUG] transformed S202Ma.SPC -> S202MA.SPC
[sigmove 11:02:33 DEBUG] transformed S202Mb.SPC -> S202MB.SPC
[sigmove 11:02:33 DEBUG] transformed S202Mc.SPC -> S202MC.SPC
[sigmove 11:02:33 DEBUG] transformed S202Md.SPC -> S202MD.SPC
[sigmove 11:02:33 DEBUG] transformed S202Me.SPC -> S202ME.SPC
[sigmove 11:02:33 DEBUG] transformed S202Mf.SPC -> S202MF.SPC
[Status 11:02:33 INFO] data for S202 transferred to science data processing
[Tidy 11:02:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:02:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:02:33 INFO] resetting WatchDogTimer
[Status 11:02:33 INFO] Starting Set [AERI set: name T202, 6 scans, 0 angle, D16300 command]
[Ingest 11:02:33 INFO] Sending XML status message
[Status 11:02:33 INFO] Mirror angle: 0
[Mirror 11:02:34 INFO] rotating to position T
[Status 11:02:34 INFO] .SET file for ACQ96 ready
[Ingest 11:02:34 INFO] Starting acquisition
[Status 11:02:34 INFO] reading housekeeping
[Status 11:02:52 INFO] acquire complete
[Status 11:02:53 INFO] writing housekeeping
[Sequencer 11:02:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:02:53 INFO] incremented T scene to 202 completed views
[Sequencer 11:02:53 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:02:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:02:53 INFO] incremented to [AERI set: name U202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:02:53 INFO] T202.SIG(18)
[sigmove 11:02:53 DEBUG] transformed T202Ma.SPC -> T202MA.SPC
[sigmove 11:02:53 DEBUG] transformed T202Mb.SPC -> T202MB.SPC
[sigmove 11:02:53 DEBUG] transformed T202Mc.SPC -> T202MC.SPC
[sigmove 11:02:53 DEBUG] transformed T202Md.SPC -> T202MD.SPC
[sigmove 11:02:53 DEBUG] transformed T202Me.SPC -> T202ME.SPC
[sigmove 11:02:53 DEBUG] transformed T202Mf.SPC -> T202MF.SPC
[Status 11:02:53 INFO] data for T202 transferred to science data processing
[Tidy 11:02:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:02:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:02:53 INFO] resetting WatchDogTimer
[Status 11:02:53 INFO] Starting Set [AERI set: name U202, 6 scans, 0 angle, D16300 command]
[Ingest 11:02:53 INFO] Sending XML status message
[Status 11:02:53 INFO] Mirror angle: 0
[Mirror 11:02:54 INFO] rotating to position U
[Status 11:02:54 INFO] .SET file for ACQ96 ready
[Ingest 11:02:54 INFO] Starting acquisition
[Status 11:02:54 INFO] reading housekeeping
[Status 11:03:12 INFO] acquire complete
[Status 11:03:13 INFO] writing housekeeping
[Sequencer 11:03:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:03:13 INFO] incremented U scene to 202 completed views
[Sequencer 11:03:13 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:03:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:03:13 INFO] incremented to [AERI set: name V202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:03:13 INFO] U202.SIG(18)
[sigmove 11:03:13 DEBUG] transformed U202Ma.SPC -> U202MA.SPC
[sigmove 11:03:13 DEBUG] transformed U202Mb.SPC -> U202MB.SPC
[sigmove 11:03:13 DEBUG] transformed U202Mc.SPC -> U202MC.SPC
[sigmove 11:03:13 DEBUG] transformed U202Md.SPC -> U202MD.SPC
[sigmove 11:03:13 DEBUG] transformed U202Me.SPC -> U202ME.SPC
[sigmove 11:03:13 DEBUG] transformed U202Mf.SPC -> U202MF.SPC
[Status 11:03:13 INFO] data for U202 transferred to science data processing
[Tidy 11:03:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:03:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:03:13 INFO] resetting WatchDogTimer
[Status 11:03:14 INFO] Starting Set [AERI set: name V202, 6 scans, 0 angle, D16300 command]
[Ingest 11:03:14 INFO] Sending XML status message
[Status 11:03:14 INFO] Mirror angle: 0
[Mirror 11:03:14 INFO] rotating to position V
[Status 11:03:14 INFO] .SET file for ACQ96 ready
[Ingest 11:03:14 INFO] Starting acquisition
[Status 11:03:15 INFO] reading housekeeping
[Status 11:03:33 INFO] acquire complete
[Status 11:03:33 INFO] writing housekeeping
[Sequencer 11:03:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:03:33 INFO] incremented V scene to 202 completed views
[Sequencer 11:03:33 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:03:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:03:33 INFO] incremented to [AERI set: name W202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:03:33 INFO] V202.SIG(18)
[sigmove 11:03:33 DEBUG] transformed V202Ma.SPC -> V202MA.SPC
[sigmove 11:03:33 DEBUG] transformed V202Mb.SPC -> V202MB.SPC
[sigmove 11:03:33 DEBUG] transformed V202Mc.SPC -> V202MC.SPC
[sigmove 11:03:33 DEBUG] transformed V202Md.SPC -> V202MD.SPC
[sigmove 11:03:33 DEBUG] transformed V202Me.SPC -> V202ME.SPC
[sigmove 11:03:33 DEBUG] transformed V202Mf.SPC -> V202MF.SPC
[Status 11:03:33 INFO] data for V202 transferred to science data processing
[Tidy 11:03:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:03:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:03:33 INFO] resetting WatchDogTimer
[Status 11:03:34 INFO] Starting Set [AERI set: name W202, 6 scans, 0 angle, D16300 command]
[Ingest 11:03:34 INFO] Sending XML status message
[Status 11:03:34 INFO] Mirror angle: 0
[Mirror 11:03:34 INFO] rotating to position W
[Status 11:03:34 INFO] .SET file for ACQ96 ready
[Ingest 11:03:35 INFO] Starting acquisition
[Status 11:03:35 INFO] reading housekeeping
[Status 11:03:53 INFO] acquire complete
[Status 11:03:54 INFO] writing housekeeping
[Sequencer 11:03:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:03:54 INFO] incremented W scene to 202 completed views
[Sequencer 11:03:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:03:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:03:54 INFO] incremented to [AERI set: name X202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:03:54 INFO] W202.SIG(18)
[sigmove 11:03:54 DEBUG] transformed W202Ma.SPC -> W202MA.SPC
[sigmove 11:03:54 DEBUG] transformed W202Mb.SPC -> W202MB.SPC
[sigmove 11:03:54 DEBUG] transformed W202Mc.SPC -> W202MC.SPC
[sigmove 11:03:54 DEBUG] transformed W202Md.SPC -> W202MD.SPC
[sigmove 11:03:54 DEBUG] transformed W202Me.SPC -> W202ME.SPC
[sigmove 11:03:54 DEBUG] transformed W202Mf.SPC -> W202MF.SPC
[Status 11:03:54 INFO] data for W202 transferred to science data processing
[Tidy 11:03:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:03:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:03:54 INFO] resetting WatchDogTimer
[Status 11:03:54 INFO] Starting Set [AERI set: name X202, 6 scans, 0 angle, D16300 command]
[Ingest 11:03:54 INFO] Sending XML status message
[Status 11:03:54 INFO] Mirror angle: 0
[Mirror 11:03:54 INFO] rotating to position X
[Status 11:03:55 INFO] .SET file for ACQ96 ready
[Ingest 11:03:55 INFO] Starting acquisition
[Status 11:03:55 INFO] reading housekeeping
[Status 11:04:13 INFO] acquire complete
[Status 11:04:14 INFO] writing housekeeping
[Sequencer 11:04:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:04:14 INFO] incremented X scene to 202 completed views
[Sequencer 11:04:14 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:04:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:04:14 INFO] incremented to [AERI set: name Y202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:04:14 INFO] X202.SIG(18)
[sigmove 11:04:14 DEBUG] transformed X202Ma.SPC -> X202MA.SPC
[sigmove 11:04:14 DEBUG] transformed X202Mb.SPC -> X202MB.SPC
[sigmove 11:04:14 DEBUG] transformed X202Mc.SPC -> X202MC.SPC
[sigmove 11:04:14 DEBUG] transformed X202Md.SPC -> X202MD.SPC
[sigmove 11:04:14 DEBUG] transformed X202Me.SPC -> X202ME.SPC
[sigmove 11:04:14 DEBUG] transformed X202Mf.SPC -> X202MF.SPC
[Status 11:04:14 INFO] data for X202 transferred to science data processing
[Tidy 11:04:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:04:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:04:14 INFO] resetting WatchDogTimer
[Status 11:04:14 INFO] Starting Set [AERI set: name Y202, 6 scans, 0 angle, D16300 command]
[Ingest 11:04:14 INFO] Sending XML status message
[Status 11:04:14 INFO] Mirror angle: 0
[Mirror 11:04:14 INFO] rotating to position Y
[Status 11:04:15 INFO] .SET file for ACQ96 ready
[Ingest 11:04:15 INFO] Starting acquisition
[Status 11:04:15 INFO] reading housekeeping
[Status 11:04:33 INFO] acquire complete
[Status 11:04:34 INFO] writing housekeeping
[Sequencer 11:04:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:04:34 INFO] incremented Y scene to 202 completed views
[Sequencer 11:04:34 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:04:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:04:34 INFO] incremented to [AERI set: name Z202, 6 scans, 0 angle, D16300 command] set
[sigmove 11:04:34 INFO] Y202.SIG(18)
[sigmove 11:04:34 DEBUG] transformed Y202Ma.SPC -> Y202MA.SPC
[sigmove 11:04:34 DEBUG] transformed Y202Mb.SPC -> Y202MB.SPC
[sigmove 11:04:34 DEBUG] transformed Y202Mc.SPC -> Y202MC.SPC
[sigmove 11:04:34 DEBUG] transformed Y202Md.SPC -> Y202MD.SPC
[sigmove 11:04:34 DEBUG] transformed Y202Me.SPC -> Y202ME.SPC
[sigmove 11:04:34 DEBUG] transformed Y202Mf.SPC -> Y202MF.SPC
[Status 11:04:34 INFO] data for Y202 transferred to science data processing
[Tidy 11:04:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:04:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:04:34 INFO] resetting WatchDogTimer
[Status 11:04:34 INFO] Starting Set [AERI set: name Z202, 6 scans, 0 angle, D16300 command]
[Ingest 11:04:34 INFO] Sending XML status message
[Status 11:04:34 INFO] Mirror angle: 0
[Mirror 11:04:35 INFO] rotating to position Z
[Status 11:04:35 INFO] .SET file for ACQ96 ready
[Ingest 11:04:35 INFO] Starting acquisition
[Status 11:04:35 INFO] reading housekeeping
[Status 11:04:53 INFO] acquire complete
[Status 11:04:54 INFO] writing housekeeping
[Sequencer 11:04:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:04:54 INFO] incremented Z scene to 202 completed views
[Sequencer 11:04:54 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:04:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:04:54 INFO] incremented to [AERI set: name H203, 6 scans, 60 angle, D22500 command] set
[sigmove 11:04:54 INFO] Z202.SIG(18)
[sigmove 11:04:54 DEBUG] transformed Z202Ma.SPC -> Z202MA.SPC
[sigmove 11:04:54 DEBUG] transformed Z202Mb.SPC -> Z202MB.SPC
[sigmove 11:04:54 DEBUG] transformed Z202Mc.SPC -> Z202MC.SPC
[sigmove 11:04:54 DEBUG] transformed Z202Md.SPC -> Z202MD.SPC
[sigmove 11:04:54 DEBUG] transformed Z202Me.SPC -> Z202ME.SPC
[sigmove 11:04:54 DEBUG] transformed Z202Mf.SPC -> Z202MF.SPC
[Status 11:04:54 INFO] data for Z202 transferred to science data processing
[Tidy 11:04:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:04:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:04:54 INFO] resetting WatchDogTimer
[Status 11:04:54 INFO] Starting Set [AERI set: name H203, 6 scans, 60 angle, D22500 command]
[Ingest 11:04:54 INFO] Sending XML status message
[Status 11:04:54 INFO] Mirror angle: 60
[Mirror 11:04:55 INFO] rotating to position H
[Status 11:04:56 INFO] .SET file for ACQ96 ready
[Ingest 11:04:56 INFO] Starting acquisition
[Status 11:04:56 INFO] reading housekeeping
[Status 11:05:14 INFO] acquire complete
[Status 11:05:14 INFO] writing housekeeping
[Sequencer 11:05:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:05:14 INFO] incremented H scene to 203 completed views
[Sequencer 11:05:14 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:05:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:05:14 INFO] incremented to [AERI set: name A203, 6 scans, 120 angle, D28300 command] set
[sigmove 11:05:14 INFO] H203.SIG(18)
[sigmove 11:05:14 DEBUG] transformed H203Ma.SPC -> H203MA.SPC
[sigmove 11:05:14 DEBUG] transformed H203Mb.SPC -> H203MB.SPC
[sigmove 11:05:14 DEBUG] transformed H203Mc.SPC -> H203MC.SPC
[sigmove 11:05:14 DEBUG] transformed H203Md.SPC -> H203MD.SPC
[sigmove 11:05:14 DEBUG] transformed H203Me.SPC -> H203ME.SPC
[sigmove 11:05:14 DEBUG] transformed H203Mf.SPC -> H203MF.SPC
[Status 11:05:14 INFO] data for H203 transferred to science data processing
[Tidy 11:05:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:05:15 INFO] A201.FIN(19),H201.FIN(19),S201.FIN(19),T201.FIN(19),U201.FIN(19),V201.FIN(19),W201.FIN(19),X201.FIN(19),Y201.FIN(19),Z201.FIN(19),A202.FIN(19),H202.FIN(19),S202.FIN(19),T202.FIN(19),U202.FIN(19),V202.FIN(19),W202.FIN(19),X202.FIN(19),Y202.FIN(19),Z202.FIN(19)
[sigmove 11:05:15 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:05:15 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:05:18 DEBUG] done zipping
[WatchDog 11:05:18 INFO] resetting WatchDogTimer
[Status 11:05:19 INFO] Starting Set [AERI set: name A203, 6 scans, 120 angle, D28300 command]
[Ingest 11:05:19 INFO] Sending XML status message
[Status 11:05:19 INFO] Mirror angle: 120
[Mirror 11:05:19 INFO] rotating to position A
[Status 11:05:20 INFO] .SET file for ACQ96 ready
[Ingest 11:05:20 INFO] Starting acquisition
[Status 11:05:20 INFO] reading housekeeping
[Status 11:05:38 INFO] acquire complete
[Status 11:05:39 INFO] writing housekeeping
[Sequencer 11:05:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:05:39 INFO] incremented A scene to 203 completed views
[Sequencer 11:05:39 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:05:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:05:39 INFO] incremented to [AERI set: name S203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:05:39 INFO] A203.SIG(18)
[sigmove 11:05:39 DEBUG] transformed A203Ma.SPC -> A203MA.SPC
[sigmove 11:05:39 DEBUG] transformed A203Mb.SPC -> A203MB.SPC
[sigmove 11:05:39 DEBUG] transformed A203Mc.SPC -> A203MC.SPC
[sigmove 11:05:39 DEBUG] transformed A203Md.SPC -> A203MD.SPC
[sigmove 11:05:39 DEBUG] transformed A203Me.SPC -> A203ME.SPC
[sigmove 11:05:39 DEBUG] transformed A203Mf.SPC -> A203MF.SPC
[Status 11:05:39 INFO] data for A203 transferred to science data processing
[Tidy 11:05:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:05:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:05:39 INFO] resetting WatchDogTimer
[Status 11:05:39 INFO] Starting Set [AERI set: name S203, 6 scans, 0 angle, D16300 command]
[Ingest 11:05:39 INFO] Sending XML status message
[Status 11:05:39 INFO] Mirror angle: 0
[Mirror 11:05:40 INFO] rotating to position S
[Status 11:05:41 INFO] .SET file for ACQ96 ready
[Ingest 11:05:41 INFO] Starting acquisition
[Status 11:05:42 INFO] reading housekeeping
[Status 11:06:00 INFO] acquire complete
[Status 11:06:00 INFO] writing housekeeping
[Sequencer 11:06:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:06:00 INFO] incremented S scene to 203 completed views
[Sequencer 11:06:00 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:06:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:06:00 INFO] incremented to [AERI set: name T203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:06:00 INFO] S203.SIG(18)
[sigmove 11:06:00 DEBUG] transformed S203Ma.SPC -> S203MA.SPC
[sigmove 11:06:00 DEBUG] transformed S203Mb.SPC -> S203MB.SPC
[sigmove 11:06:00 DEBUG] transformed S203Mc.SPC -> S203MC.SPC
[sigmove 11:06:00 DEBUG] transformed S203Md.SPC -> S203MD.SPC
[sigmove 11:06:00 DEBUG] transformed S203Me.SPC -> S203ME.SPC
[sigmove 11:06:00 DEBUG] transformed S203Mf.SPC -> S203MF.SPC
[Status 11:06:00 INFO] data for S203 transferred to science data processing
[Tidy 11:06:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:06:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:06:00 INFO] resetting WatchDogTimer
[Status 11:06:01 INFO] Starting Set [AERI set: name T203, 6 scans, 0 angle, D16300 command]
[Ingest 11:06:01 INFO] Sending XML status message
[Status 11:06:01 INFO] Mirror angle: 0
[Mirror 11:06:01 INFO] rotating to position T
[Status 11:06:01 INFO] .SET file for ACQ96 ready
[Ingest 11:06:02 INFO] Starting acquisition
[Status 11:06:02 INFO] reading housekeeping
[Status 11:06:20 INFO] acquire complete
[Status 11:06:21 INFO] writing housekeeping
[Sequencer 11:06:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:06:21 INFO] incremented T scene to 203 completed views
[Sequencer 11:06:21 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:06:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:06:21 INFO] incremented to [AERI set: name U203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:06:21 INFO] T203.SIG(18)
[sigmove 11:06:21 DEBUG] transformed T203Ma.SPC -> T203MA.SPC
[sigmove 11:06:21 DEBUG] transformed T203Mb.SPC -> T203MB.SPC
[sigmove 11:06:21 DEBUG] transformed T203Mc.SPC -> T203MC.SPC
[sigmove 11:06:21 DEBUG] transformed T203Md.SPC -> T203MD.SPC
[sigmove 11:06:21 DEBUG] transformed T203Me.SPC -> T203ME.SPC
[sigmove 11:06:21 DEBUG] transformed T203Mf.SPC -> T203MF.SPC
[Status 11:06:21 INFO] data for T203 transferred to science data processing
[Tidy 11:06:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:06:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:06:21 INFO] resetting WatchDogTimer
[Status 11:06:21 INFO] Starting Set [AERI set: name U203, 6 scans, 0 angle, D16300 command]
[Ingest 11:06:21 INFO] Sending XML status message
[Status 11:06:21 INFO] Mirror angle: 0
[Mirror 11:06:21 INFO] rotating to position U
[Status 11:06:22 INFO] .SET file for ACQ96 ready
[Ingest 11:06:22 INFO] Starting acquisition
[Status 11:06:22 INFO] reading housekeeping
[Status 11:06:40 INFO] acquire complete
[Status 11:06:41 INFO] writing housekeeping
[Sequencer 11:06:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:06:41 INFO] incremented U scene to 203 completed views
[Sequencer 11:06:41 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:06:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:06:41 INFO] incremented to [AERI set: name V203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:06:41 INFO] U203.SIG(18)
[sigmove 11:06:41 DEBUG] transformed U203Ma.SPC -> U203MA.SPC
[sigmove 11:06:41 DEBUG] transformed U203Mb.SPC -> U203MB.SPC
[sigmove 11:06:41 DEBUG] transformed U203Mc.SPC -> U203MC.SPC
[sigmove 11:06:41 DEBUG] transformed U203Md.SPC -> U203MD.SPC
[sigmove 11:06:41 DEBUG] transformed U203Me.SPC -> U203ME.SPC
[sigmove 11:06:41 DEBUG] transformed U203Mf.SPC -> U203MF.SPC
[Status 11:06:41 INFO] data for U203 transferred to science data processing
[Tidy 11:06:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:06:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:06:41 INFO] resetting WatchDogTimer
[Status 11:06:41 INFO] Starting Set [AERI set: name V203, 6 scans, 0 angle, D16300 command]
[Ingest 11:06:41 INFO] Sending XML status message
[Status 11:06:41 INFO] Mirror angle: 0
[Mirror 11:06:41 INFO] rotating to position V
[Status 11:06:42 INFO] .SET file for ACQ96 ready
[Ingest 11:06:42 INFO] Starting acquisition
[Status 11:06:42 INFO] reading housekeeping
[Status 11:07:00 INFO] acquire complete
[Status 11:07:01 INFO] writing housekeeping
[Sequencer 11:07:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:07:01 INFO] incremented V scene to 203 completed views
[Sequencer 11:07:01 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:07:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:07:01 INFO] incremented to [AERI set: name W203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:07:01 INFO] V203.SIG(18)
[sigmove 11:07:01 DEBUG] transformed V203Ma.SPC -> V203MA.SPC
[sigmove 11:07:01 DEBUG] transformed V203Mb.SPC -> V203MB.SPC
[sigmove 11:07:01 DEBUG] transformed V203Mc.SPC -> V203MC.SPC
[sigmove 11:07:01 DEBUG] transformed V203Md.SPC -> V203MD.SPC
[sigmove 11:07:01 DEBUG] transformed V203Me.SPC -> V203ME.SPC
[sigmove 11:07:01 DEBUG] transformed V203Mf.SPC -> V203MF.SPC
[Status 11:07:01 INFO] data for V203 transferred to science data processing
[Tidy 11:07:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:07:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:07:01 INFO] resetting WatchDogTimer
[Status 11:07:01 INFO] Starting Set [AERI set: name W203, 6 scans, 0 angle, D16300 command]
[Ingest 11:07:01 INFO] Sending XML status message
[Status 11:07:01 INFO] Mirror angle: 0
[Mirror 11:07:02 INFO] rotating to position W
[Status 11:07:02 INFO] .SET file for ACQ96 ready
[Ingest 11:07:02 INFO] Starting acquisition
[Status 11:07:02 INFO] reading housekeeping
[Status 11:07:20 INFO] acquire complete
[Status 11:07:21 INFO] writing housekeeping
[Sequencer 11:07:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:07:21 INFO] incremented W scene to 203 completed views
[Sequencer 11:07:21 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:07:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:07:21 INFO] incremented to [AERI set: name X203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:07:21 INFO] W203.SIG(18)
[sigmove 11:07:21 DEBUG] transformed W203Ma.SPC -> W203MA.SPC
[sigmove 11:07:21 DEBUG] transformed W203Mb.SPC -> W203MB.SPC
[sigmove 11:07:21 DEBUG] transformed W203Mc.SPC -> W203MC.SPC
[sigmove 11:07:21 DEBUG] transformed W203Md.SPC -> W203MD.SPC
[sigmove 11:07:21 DEBUG] transformed W203Me.SPC -> W203ME.SPC
[sigmove 11:07:21 DEBUG] transformed W203Mf.SPC -> W203MF.SPC
[Status 11:07:21 INFO] data for W203 transferred to science data processing
[Tidy 11:07:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:07:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:07:21 INFO] resetting WatchDogTimer
[Status 11:07:21 INFO] Starting Set [AERI set: name X203, 6 scans, 0 angle, D16300 command]
[Ingest 11:07:21 INFO] Sending XML status message
[Status 11:07:21 INFO] Mirror angle: 0
[Mirror 11:07:22 INFO] rotating to position X
[Status 11:07:22 INFO] .SET file for ACQ96 ready
[Ingest 11:07:22 INFO] Starting acquisition
[Status 11:07:23 INFO] reading housekeeping
[Status 11:07:41 INFO] acquire complete
[Status 11:07:41 INFO] writing housekeeping
[Sequencer 11:07:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:07:41 INFO] incremented X scene to 203 completed views
[Sequencer 11:07:41 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:07:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:07:41 INFO] incremented to [AERI set: name Y203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:07:41 INFO] X203.SIG(18)
[sigmove 11:07:41 DEBUG] transformed X203Ma.SPC -> X203MA.SPC
[sigmove 11:07:41 DEBUG] transformed X203Mb.SPC -> X203MB.SPC
[sigmove 11:07:41 DEBUG] transformed X203Mc.SPC -> X203MC.SPC
[sigmove 11:07:41 DEBUG] transformed X203Md.SPC -> X203MD.SPC
[sigmove 11:07:41 DEBUG] transformed X203Me.SPC -> X203ME.SPC
[sigmove 11:07:41 DEBUG] transformed X203Mf.SPC -> X203MF.SPC
[Status 11:07:41 INFO] data for X203 transferred to science data processing
[Tidy 11:07:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:07:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:07:41 INFO] resetting WatchDogTimer
[Status 11:07:42 INFO] Starting Set [AERI set: name Y203, 6 scans, 0 angle, D16300 command]
[Ingest 11:07:42 INFO] Sending XML status message
[Status 11:07:42 INFO] Mirror angle: 0
[Mirror 11:07:42 INFO] rotating to position Y
[Status 11:07:42 INFO] .SET file for ACQ96 ready
[Ingest 11:07:43 INFO] Starting acquisition
[Status 11:07:43 INFO] reading housekeeping
[Status 11:08:01 INFO] acquire complete
[Status 11:08:02 INFO] writing housekeeping
[Sequencer 11:08:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:08:02 INFO] incremented Y scene to 203 completed views
[Sequencer 11:08:02 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:08:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:08:02 INFO] incremented to [AERI set: name Z203, 6 scans, 0 angle, D16300 command] set
[sigmove 11:08:02 INFO] Y203.SIG(18)
[sigmove 11:08:02 DEBUG] transformed Y203Ma.SPC -> Y203MA.SPC
[sigmove 11:08:02 DEBUG] transformed Y203Mb.SPC -> Y203MB.SPC
[sigmove 11:08:02 DEBUG] transformed Y203Mc.SPC -> Y203MC.SPC
[sigmove 11:08:02 DEBUG] transformed Y203Md.SPC -> Y203MD.SPC
[sigmove 11:08:02 DEBUG] transformed Y203Me.SPC -> Y203ME.SPC
[sigmove 11:08:02 DEBUG] transformed Y203Mf.SPC -> Y203MF.SPC
[Status 11:08:02 INFO] data for Y203 transferred to science data processing
[Tidy 11:08:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:08:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:08:02 INFO] resetting WatchDogTimer
[Status 11:08:02 INFO] Starting Set [AERI set: name Z203, 6 scans, 0 angle, D16300 command]
[Ingest 11:08:02 INFO] Sending XML status message
[Status 11:08:02 INFO] Mirror angle: 0
[Mirror 11:08:02 INFO] rotating to position Z
[Status 11:08:03 INFO] .SET file for ACQ96 ready
[Ingest 11:08:03 INFO] Starting acquisition
[Status 11:08:03 INFO] reading housekeeping
[Status 11:08:21 INFO] acquire complete
[Status 11:08:22 INFO] writing housekeeping
[Sequencer 11:08:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:08:22 INFO] incremented Z scene to 203 completed views
[Sequencer 11:08:22 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:08:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:08:22 INFO] incremented to [AERI set: name A204, 6 scans, 120 angle, D28300 command] set
[sigmove 11:08:22 INFO] Z203.SIG(18)
[sigmove 11:08:22 DEBUG] transformed Z203Ma.SPC -> Z203MA.SPC
[sigmove 11:08:22 DEBUG] transformed Z203Mb.SPC -> Z203MB.SPC
[sigmove 11:08:22 DEBUG] transformed Z203Mc.SPC -> Z203MC.SPC
[sigmove 11:08:22 DEBUG] transformed Z203Md.SPC -> Z203MD.SPC
[sigmove 11:08:22 DEBUG] transformed Z203Me.SPC -> Z203ME.SPC
[sigmove 11:08:22 DEBUG] transformed Z203Mf.SPC -> Z203MF.SPC
[Status 11:08:22 INFO] data for Z203 transferred to science data processing
[Tidy 11:08:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:08:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:08:22 INFO] resetting WatchDogTimer
[Status 11:08:22 INFO] Starting Set [AERI set: name A204, 6 scans, 120 angle, D28300 command]
[Ingest 11:08:22 INFO] Sending XML status message
[Status 11:08:22 INFO] Mirror angle: 120
[Mirror 11:08:22 INFO] rotating to position A
[Status 11:08:24 INFO] .SET file for ACQ96 ready
[Ingest 11:08:24 INFO] Starting acquisition
[Status 11:08:24 INFO] reading housekeeping
[Status 11:08:42 INFO] acquire complete
[Status 11:08:43 INFO] writing housekeeping
[Sequencer 11:08:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:08:43 INFO] incremented A scene to 204 completed views
[Sequencer 11:08:43 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:08:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:08:43 INFO] incremented to [AERI set: name H204, 6 scans, 60 angle, D22500 command] set
[sigmove 11:08:43 INFO] A204.SIG(18)
[sigmove 11:08:43 DEBUG] transformed A204Ma.SPC -> A204MA.SPC
[sigmove 11:08:43 DEBUG] transformed A204Mb.SPC -> A204MB.SPC
[sigmove 11:08:43 DEBUG] transformed A204Mc.SPC -> A204MC.SPC
[sigmove 11:08:43 DEBUG] transformed A204Md.SPC -> A204MD.SPC
[sigmove 11:08:43 DEBUG] transformed A204Me.SPC -> A204ME.SPC
[sigmove 11:08:43 DEBUG] transformed A204Mf.SPC -> A204MF.SPC
[Status 11:08:43 INFO] data for A204 transferred to science data processing
[Tidy 11:08:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:08:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:08:43 INFO] resetting WatchDogTimer
[Status 11:08:43 INFO] Starting Set [AERI set: name H204, 6 scans, 60 angle, D22500 command]
[Ingest 11:08:43 INFO] Sending XML status message
[Status 11:08:43 INFO] Mirror angle: 60
[Mirror 11:08:44 INFO] rotating to position H
[Status 11:08:45 INFO] .SET file for ACQ96 ready
[Ingest 11:08:45 INFO] Starting acquisition
[Status 11:08:45 INFO] reading housekeeping
[Status 11:09:02 INFO] acquire complete
[Status 11:09:03 INFO] writing housekeeping
[Sequencer 11:09:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:09:03 INFO] incremented H scene to 204 completed views
[Sequencer 11:09:03 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:09:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:09:03 INFO] incremented to [AERI set: name S204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:09:03 INFO] H204.SIG(18)
[sigmove 11:09:03 DEBUG] transformed H204Ma.SPC -> H204MA.SPC
[sigmove 11:09:03 DEBUG] transformed H204Mb.SPC -> H204MB.SPC
[sigmove 11:09:03 DEBUG] transformed H204Mc.SPC -> H204MC.SPC
[sigmove 11:09:03 DEBUG] transformed H204Md.SPC -> H204MD.SPC
[sigmove 11:09:03 DEBUG] transformed H204Me.SPC -> H204ME.SPC
[sigmove 11:09:03 DEBUG] transformed H204Mf.SPC -> H204MF.SPC
[Status 11:09:03 INFO] data for H204 transferred to science data processing
[Tidy 11:09:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:09:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:09:03 INFO] resetting WatchDogTimer
[Status 11:09:04 INFO] Starting Set [AERI set: name S204, 6 scans, 0 angle, D16300 command]
[Ingest 11:09:04 INFO] Sending XML status message
[Status 11:09:04 INFO] Mirror angle: 0
[Mirror 11:09:04 INFO] rotating to position S
[Status 11:09:05 INFO] .SET file for ACQ96 ready
[Ingest 11:09:05 INFO] Starting acquisition
[Status 11:09:05 INFO] reading housekeeping
[Status 11:09:23 INFO] acquire complete
[Status 11:09:24 INFO] writing housekeeping
[Sequencer 11:09:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:09:24 INFO] incremented S scene to 204 completed views
[Sequencer 11:09:24 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:09:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:09:24 INFO] incremented to [AERI set: name T204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:09:24 INFO] S204.SIG(18)
[sigmove 11:09:24 DEBUG] transformed S204Ma.SPC -> S204MA.SPC
[sigmove 11:09:24 DEBUG] transformed S204Mb.SPC -> S204MB.SPC
[sigmove 11:09:24 DEBUG] transformed S204Mc.SPC -> S204MC.SPC
[sigmove 11:09:24 DEBUG] transformed S204Md.SPC -> S204MD.SPC
[sigmove 11:09:24 DEBUG] transformed S204Me.SPC -> S204ME.SPC
[sigmove 11:09:24 DEBUG] transformed S204Mf.SPC -> S204MF.SPC
[Status 11:09:24 INFO] data for S204 transferred to science data processing
[Tidy 11:09:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:09:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:09:24 INFO] resetting WatchDogTimer
[Status 11:09:24 INFO] Starting Set [AERI set: name T204, 6 scans, 0 angle, D16300 command]
[Ingest 11:09:24 INFO] Sending XML status message
[Status 11:09:24 INFO] Mirror angle: 0
[Mirror 11:09:24 INFO] rotating to position T
[Status 11:09:25 INFO] .SET file for ACQ96 ready
[Ingest 11:09:25 INFO] Starting acquisition
[Status 11:09:25 INFO] reading housekeeping
[Status 11:09:43 INFO] acquire complete
[Status 11:09:44 INFO] writing housekeeping
[Sequencer 11:09:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:09:44 INFO] incremented T scene to 204 completed views
[Sequencer 11:09:44 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:09:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:09:44 INFO] incremented to [AERI set: name U204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:09:44 INFO] T204.SIG(18)
[sigmove 11:09:44 DEBUG] transformed T204Ma.SPC -> T204MA.SPC
[sigmove 11:09:44 DEBUG] transformed T204Mb.SPC -> T204MB.SPC
[sigmove 11:09:44 DEBUG] transformed T204Mc.SPC -> T204MC.SPC
[sigmove 11:09:44 DEBUG] transformed T204Md.SPC -> T204MD.SPC
[sigmove 11:09:44 DEBUG] transformed T204Me.SPC -> T204ME.SPC
[sigmove 11:09:44 DEBUG] transformed T204Mf.SPC -> T204MF.SPC
[Status 11:09:44 INFO] data for T204 transferred to science data processing
[Tidy 11:09:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:09:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:09:44 INFO] resetting WatchDogTimer
[Status 11:09:44 INFO] Starting Set [AERI set: name U204, 6 scans, 0 angle, D16300 command]
[Ingest 11:09:44 INFO] Sending XML status message
[Status 11:09:44 INFO] Mirror angle: 0
[Mirror 11:09:44 INFO] rotating to position U
[Status 11:09:45 INFO] .SET file for ACQ96 ready
[Ingest 11:09:45 INFO] Starting acquisition
[Status 11:09:45 INFO] reading housekeeping
[Status 11:10:03 INFO] acquire complete
[Status 11:10:04 INFO] writing housekeeping
[Sequencer 11:10:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:10:04 INFO] incremented U scene to 204 completed views
[Sequencer 11:10:04 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:10:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:10:04 INFO] incremented to [AERI set: name V204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:10:04 INFO] U204.SIG(18)
[sigmove 11:10:04 DEBUG] transformed U204Ma.SPC -> U204MA.SPC
[sigmove 11:10:04 DEBUG] transformed U204Mb.SPC -> U204MB.SPC
[sigmove 11:10:04 DEBUG] transformed U204Mc.SPC -> U204MC.SPC
[sigmove 11:10:04 DEBUG] transformed U204Md.SPC -> U204MD.SPC
[sigmove 11:10:04 DEBUG] transformed U204Me.SPC -> U204ME.SPC
[sigmove 11:10:04 DEBUG] transformed U204Mf.SPC -> U204MF.SPC
[Status 11:10:04 INFO] data for U204 transferred to science data processing
[Tidy 11:10:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:10:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:10:04 INFO] resetting WatchDogTimer
[Status 11:10:04 INFO] Starting Set [AERI set: name V204, 6 scans, 0 angle, D16300 command]
[Ingest 11:10:04 INFO] Sending XML status message
[Status 11:10:04 INFO] Mirror angle: 0
[Mirror 11:10:04 INFO] rotating to position V
[Status 11:10:05 INFO] .SET file for ACQ96 ready
[Ingest 11:10:05 INFO] Starting acquisition
[Status 11:10:05 INFO] reading housekeeping
[Status 11:10:23 INFO] acquire complete
[Status 11:10:24 INFO] writing housekeeping
[Sequencer 11:10:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:10:24 INFO] incremented V scene to 204 completed views
[Sequencer 11:10:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:10:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:10:24 INFO] incremented to [AERI set: name W204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:10:24 INFO] V204.SIG(18)
[sigmove 11:10:24 DEBUG] transformed V204Ma.SPC -> V204MA.SPC
[sigmove 11:10:24 DEBUG] transformed V204Mb.SPC -> V204MB.SPC
[sigmove 11:10:24 DEBUG] transformed V204Mc.SPC -> V204MC.SPC
[sigmove 11:10:24 DEBUG] transformed V204Md.SPC -> V204MD.SPC
[sigmove 11:10:24 DEBUG] transformed V204Me.SPC -> V204ME.SPC
[sigmove 11:10:24 DEBUG] transformed V204Mf.SPC -> V204MF.SPC
[Status 11:10:24 INFO] data for V204 transferred to science data processing
[Tidy 11:10:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:10:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:10:24 INFO] resetting WatchDogTimer
[Status 11:10:24 INFO] Starting Set [AERI set: name W204, 6 scans, 0 angle, D16300 command]
[Ingest 11:10:24 INFO] Sending XML status message
[Status 11:10:24 INFO] Mirror angle: 0
[Mirror 11:10:25 INFO] rotating to position W
[Status 11:10:25 INFO] .SET file for ACQ96 ready
[Ingest 11:10:25 INFO] Starting acquisition
[Status 11:10:26 INFO] reading housekeeping
[Status 11:10:43 INFO] acquire complete
[Status 11:10:44 INFO] writing housekeeping
[Sequencer 11:10:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:10:44 INFO] incremented W scene to 204 completed views
[Sequencer 11:10:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:10:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:10:44 INFO] incremented to [AERI set: name X204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:10:44 INFO] W204.SIG(18)
[sigmove 11:10:44 DEBUG] transformed W204Ma.SPC -> W204MA.SPC
[sigmove 11:10:44 DEBUG] transformed W204Mb.SPC -> W204MB.SPC
[sigmove 11:10:44 DEBUG] transformed W204Mc.SPC -> W204MC.SPC
[sigmove 11:10:44 DEBUG] transformed W204Md.SPC -> W204MD.SPC
[sigmove 11:10:44 DEBUG] transformed W204Me.SPC -> W204ME.SPC
[sigmove 11:10:44 DEBUG] transformed W204Mf.SPC -> W204MF.SPC
[Status 11:10:44 INFO] data for W204 transferred to science data processing
[Tidy 11:10:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:10:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:10:44 INFO] resetting WatchDogTimer
[Status 11:10:45 INFO] Starting Set [AERI set: name X204, 6 scans, 0 angle, D16300 command]
[Ingest 11:10:45 INFO] Sending XML status message
[Status 11:10:45 INFO] Mirror angle: 0
[Mirror 11:10:45 INFO] rotating to position X
[Status 11:10:45 INFO] .SET file for ACQ96 ready
[Ingest 11:10:46 INFO] Starting acquisition
[Status 11:10:46 INFO] reading housekeeping
[Status 11:11:04 INFO] acquire complete
[Status 11:11:04 INFO] writing housekeeping
[Sequencer 11:11:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:11:04 INFO] incremented X scene to 204 completed views
[Sequencer 11:11:04 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:11:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:11:04 INFO] incremented to [AERI set: name Y204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:11:04 INFO] X204.SIG(18)
[sigmove 11:11:04 DEBUG] transformed X204Ma.SPC -> X204MA.SPC
[sigmove 11:11:04 DEBUG] transformed X204Mb.SPC -> X204MB.SPC
[sigmove 11:11:04 DEBUG] transformed X204Mc.SPC -> X204MC.SPC
[sigmove 11:11:04 DEBUG] transformed X204Md.SPC -> X204MD.SPC
[sigmove 11:11:04 DEBUG] transformed X204Me.SPC -> X204ME.SPC
[sigmove 11:11:04 DEBUG] transformed X204Mf.SPC -> X204MF.SPC
[Status 11:11:04 INFO] data for X204 transferred to science data processing
[Tidy 11:11:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:11:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:11:04 INFO] resetting WatchDogTimer
[Status 11:11:05 INFO] Starting Set [AERI set: name Y204, 6 scans, 0 angle, D16300 command]
[Ingest 11:11:05 INFO] Sending XML status message
[Status 11:11:05 INFO] Mirror angle: 0
[Mirror 11:11:05 INFO] rotating to position Y
[Status 11:11:05 INFO] .SET file for ACQ96 ready
[Ingest 11:11:06 INFO] Starting acquisition
[Status 11:11:06 INFO] reading housekeeping
[Status 11:11:24 INFO] acquire complete
[Status 11:11:25 INFO] writing housekeeping
[Sequencer 11:11:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:11:25 INFO] incremented Y scene to 204 completed views
[Sequencer 11:11:25 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:11:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:11:25 INFO] incremented to [AERI set: name Z204, 6 scans, 0 angle, D16300 command] set
[sigmove 11:11:25 INFO] Y204.SIG(18)
[sigmove 11:11:25 DEBUG] transformed Y204Ma.SPC -> Y204MA.SPC
[sigmove 11:11:25 DEBUG] transformed Y204Mb.SPC -> Y204MB.SPC
[sigmove 11:11:25 DEBUG] transformed Y204Mc.SPC -> Y204MC.SPC
[sigmove 11:11:25 DEBUG] transformed Y204Md.SPC -> Y204MD.SPC
[sigmove 11:11:25 DEBUG] transformed Y204Me.SPC -> Y204ME.SPC
[sigmove 11:11:25 DEBUG] transformed Y204Mf.SPC -> Y204MF.SPC
[Status 11:11:25 INFO] data for Y204 transferred to science data processing
[Tidy 11:11:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:11:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:11:25 INFO] resetting WatchDogTimer
[Status 11:11:25 INFO] Starting Set [AERI set: name Z204, 6 scans, 0 angle, D16300 command]
[Ingest 11:11:25 INFO] Sending XML status message
[Status 11:11:25 INFO] Mirror angle: 0
[Mirror 11:11:25 INFO] rotating to position Z
[Status 11:11:26 INFO] .SET file for ACQ96 ready
[Ingest 11:11:26 INFO] Starting acquisition
[Status 11:11:26 INFO] reading housekeeping
[Status 11:11:44 INFO] acquire complete
[Status 11:11:45 INFO] writing housekeeping
[Sequencer 11:11:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:11:45 INFO] incremented Z scene to 204 completed views
[Sequencer 11:11:45 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:11:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:11:45 INFO] incremented to [AERI set: name H205, 6 scans, 60 angle, D22500 command] set
[sigmove 11:11:45 INFO] Z204.SIG(18)
[sigmove 11:11:45 DEBUG] transformed Z204Ma.SPC -> Z204MA.SPC
[sigmove 11:11:45 DEBUG] transformed Z204Mb.SPC -> Z204MB.SPC
[sigmove 11:11:45 DEBUG] transformed Z204Mc.SPC -> Z204MC.SPC
[sigmove 11:11:45 DEBUG] transformed Z204Md.SPC -> Z204MD.SPC
[sigmove 11:11:45 DEBUG] transformed Z204Me.SPC -> Z204ME.SPC
[sigmove 11:11:45 DEBUG] transformed Z204Mf.SPC -> Z204MF.SPC
[Status 11:11:45 INFO] data for Z204 transferred to science data processing
[Tidy 11:11:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:11:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:11:45 INFO] resetting WatchDogTimer
[Status 11:11:45 INFO] Starting Set [AERI set: name H205, 6 scans, 60 angle, D22500 command]
[Ingest 11:11:45 INFO] Sending XML status message
[Status 11:11:45 INFO] Mirror angle: 60
[Mirror 11:11:45 INFO] rotating to position H
[Status 11:11:46 INFO] .SET file for ACQ96 ready
[Ingest 11:11:47 INFO] Starting acquisition
[Status 11:11:47 INFO] reading housekeeping
[Status 11:12:04 INFO] acquire complete
[Status 11:12:05 INFO] writing housekeeping
[Sequencer 11:12:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:12:05 INFO] incremented H scene to 205 completed views
[Sequencer 11:12:05 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:12:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:12:05 INFO] incremented to [AERI set: name A205, 6 scans, 120 angle, D28300 command] set
[sigmove 11:12:05 INFO] H205.SIG(18)
[sigmove 11:12:05 DEBUG] transformed H205Ma.SPC -> H205MA.SPC
[sigmove 11:12:05 DEBUG] transformed H205Mb.SPC -> H205MB.SPC
[sigmove 11:12:05 DEBUG] transformed H205Mc.SPC -> H205MC.SPC
[sigmove 11:12:05 DEBUG] transformed H205Md.SPC -> H205MD.SPC
[sigmove 11:12:05 DEBUG] transformed H205Me.SPC -> H205ME.SPC
[sigmove 11:12:05 DEBUG] transformed H205Mf.SPC -> H205MF.SPC
[Status 11:12:05 INFO] data for H205 transferred to science data processing
[Tidy 11:12:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:12:05 INFO] A203.FIN(19),H203.FIN(19),S203.FIN(19),T203.FIN(19),U203.FIN(19),V203.FIN(19),W203.FIN(19),X203.FIN(19),Y203.FIN(19),Z203.FIN(19),A204.FIN(19),H204.FIN(19),S204.FIN(19),T204.FIN(19),U204.FIN(19),V204.FIN(19),W204.FIN(19),X204.FIN(19),Y204.FIN(19),Z204.FIN(19)
[sigmove 11:12:05 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:12:05 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:12:09 DEBUG] done zipping
[WatchDog 11:12:09 INFO] resetting WatchDogTimer
[Status 11:12:09 INFO] Starting Set [AERI set: name A205, 6 scans, 120 angle, D28300 command]
[Ingest 11:12:09 INFO] Sending XML status message
[Status 11:12:09 INFO] Mirror angle: 120
[Mirror 11:12:10 INFO] rotating to position A
[Status 11:12:11 INFO] .SET file for ACQ96 ready
[Ingest 11:12:11 INFO] Starting acquisition
[Status 11:12:11 INFO] reading housekeeping
[Status 11:12:29 INFO] acquire complete
[Status 11:12:30 INFO] writing housekeeping
[Sequencer 11:12:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:12:30 INFO] incremented A scene to 205 completed views
[Sequencer 11:12:30 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:12:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:12:30 INFO] incremented to [AERI set: name S205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:12:30 INFO] A205.SIG(18)
[sigmove 11:12:30 DEBUG] transformed A205Ma.SPC -> A205MA.SPC
[sigmove 11:12:30 DEBUG] transformed A205Mb.SPC -> A205MB.SPC
[sigmove 11:12:30 DEBUG] transformed A205Mc.SPC -> A205MC.SPC
[sigmove 11:12:30 DEBUG] transformed A205Md.SPC -> A205MD.SPC
[sigmove 11:12:30 DEBUG] transformed A205Me.SPC -> A205ME.SPC
[sigmove 11:12:30 DEBUG] transformed A205Mf.SPC -> A205MF.SPC
[Status 11:12:30 INFO] data for A205 transferred to science data processing
[Tidy 11:12:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:12:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:12:30 INFO] resetting WatchDogTimer
[Status 11:12:30 INFO] Starting Set [AERI set: name S205, 6 scans, 0 angle, D16300 command]
[Ingest 11:12:30 INFO] Sending XML status message
[Status 11:12:30 INFO] Mirror angle: 0
[Mirror 11:12:30 INFO] rotating to position S
[Status 11:12:32 INFO] .SET file for ACQ96 ready
[Ingest 11:12:32 INFO] Starting acquisition
[Status 11:12:32 INFO] reading housekeeping
[Status 11:12:50 INFO] acquire complete
[Status 11:12:51 INFO] writing housekeeping
[Sequencer 11:12:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:12:51 INFO] incremented S scene to 205 completed views
[Sequencer 11:12:51 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:12:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:12:51 INFO] incremented to [AERI set: name T205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:12:51 INFO] S205.SIG(18)
[sigmove 11:12:51 DEBUG] transformed S205Ma.SPC -> S205MA.SPC
[sigmove 11:12:51 DEBUG] transformed S205Mb.SPC -> S205MB.SPC
[sigmove 11:12:51 DEBUG] transformed S205Mc.SPC -> S205MC.SPC
[sigmove 11:12:51 DEBUG] transformed S205Md.SPC -> S205MD.SPC
[sigmove 11:12:51 DEBUG] transformed S205Me.SPC -> S205ME.SPC
[sigmove 11:12:51 DEBUG] transformed S205Mf.SPC -> S205MF.SPC
[Status 11:12:51 INFO] data for S205 transferred to science data processing
[Tidy 11:12:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:12:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:12:51 INFO] resetting WatchDogTimer
[Status 11:12:51 INFO] Starting Set [AERI set: name T205, 6 scans, 0 angle, D16300 command]
[Ingest 11:12:51 INFO] Sending XML status message
[Status 11:12:51 INFO] Mirror angle: 0
[Mirror 11:12:52 INFO] rotating to position T
[Status 11:12:52 INFO] .SET file for ACQ96 ready
[Ingest 11:12:52 INFO] Starting acquisition
[Status 11:12:53 INFO] reading housekeeping
[Status 11:13:10 INFO] acquire complete
[Status 11:13:11 INFO] writing housekeeping
[Sequencer 11:13:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:13:11 INFO] incremented T scene to 205 completed views
[Sequencer 11:13:11 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:13:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:13:11 INFO] incremented to [AERI set: name U205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:13:11 INFO] T205.SIG(18)
[sigmove 11:13:11 DEBUG] transformed T205Ma.SPC -> T205MA.SPC
[sigmove 11:13:11 DEBUG] transformed T205Mb.SPC -> T205MB.SPC
[sigmove 11:13:11 DEBUG] transformed T205Mc.SPC -> T205MC.SPC
[sigmove 11:13:11 DEBUG] transformed T205Md.SPC -> T205MD.SPC
[sigmove 11:13:11 DEBUG] transformed T205Me.SPC -> T205ME.SPC
[sigmove 11:13:11 DEBUG] transformed T205Mf.SPC -> T205MF.SPC
[Status 11:13:11 INFO] data for T205 transferred to science data processing
[Tidy 11:13:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:13:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:13:11 INFO] resetting WatchDogTimer
[Status 11:13:12 INFO] Starting Set [AERI set: name U205, 6 scans, 0 angle, D16300 command]
[Ingest 11:13:12 INFO] Sending XML status message
[Status 11:13:12 INFO] Mirror angle: 0
[Mirror 11:13:12 INFO] rotating to position U
[Status 11:13:12 INFO] .SET file for ACQ96 ready
[Ingest 11:13:13 INFO] Starting acquisition
[Status 11:13:13 INFO] reading housekeeping
[Status 11:13:31 INFO] acquire complete
[Status 11:13:31 INFO] writing housekeeping
[Sequencer 11:13:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:13:31 INFO] incremented U scene to 205 completed views
[Sequencer 11:13:31 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:13:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:13:31 INFO] incremented to [AERI set: name V205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:13:31 INFO] U205.SIG(18)
[sigmove 11:13:31 DEBUG] transformed U205Ma.SPC -> U205MA.SPC
[sigmove 11:13:31 DEBUG] transformed U205Mb.SPC -> U205MB.SPC
[sigmove 11:13:31 DEBUG] transformed U205Mc.SPC -> U205MC.SPC
[sigmove 11:13:31 DEBUG] transformed U205Md.SPC -> U205MD.SPC
[sigmove 11:13:31 DEBUG] transformed U205Me.SPC -> U205ME.SPC
[sigmove 11:13:31 DEBUG] transformed U205Mf.SPC -> U205MF.SPC
[Status 11:13:31 INFO] data for U205 transferred to science data processing
[Tidy 11:13:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:13:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:13:31 INFO] resetting WatchDogTimer
[Status 11:13:32 INFO] Starting Set [AERI set: name V205, 6 scans, 0 angle, D16300 command]
[Ingest 11:13:32 INFO] Sending XML status message
[Status 11:13:32 INFO] Mirror angle: 0
[Mirror 11:13:32 INFO] rotating to position V
[Status 11:13:32 INFO] .SET file for ACQ96 ready
[Ingest 11:13:33 INFO] Starting acquisition
[Status 11:13:33 INFO] reading housekeeping
[Status 11:13:51 INFO] acquire complete
[Status 11:13:52 INFO] writing housekeeping
[Sequencer 11:13:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:13:52 INFO] incremented V scene to 205 completed views
[Sequencer 11:13:52 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:13:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:13:52 INFO] incremented to [AERI set: name W205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:13:52 INFO] V205.SIG(18)
[sigmove 11:13:52 DEBUG] transformed V205Ma.SPC -> V205MA.SPC
[sigmove 11:13:52 DEBUG] transformed V205Mb.SPC -> V205MB.SPC
[sigmove 11:13:52 DEBUG] transformed V205Mc.SPC -> V205MC.SPC
[sigmove 11:13:52 DEBUG] transformed V205Md.SPC -> V205MD.SPC
[sigmove 11:13:52 DEBUG] transformed V205Me.SPC -> V205ME.SPC
[sigmove 11:13:52 DEBUG] transformed V205Mf.SPC -> V205MF.SPC
[Status 11:13:52 INFO] data for V205 transferred to science data processing
[Tidy 11:13:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:13:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:13:52 INFO] resetting WatchDogTimer
[Status 11:13:52 INFO] Starting Set [AERI set: name W205, 6 scans, 0 angle, D16300 command]
[Ingest 11:13:52 INFO] Sending XML status message
[Status 11:13:52 INFO] Mirror angle: 0
[Mirror 11:13:52 INFO] rotating to position W
[Status 11:13:53 INFO] .SET file for ACQ96 ready
[Ingest 11:13:53 INFO] Starting acquisition
[Status 11:13:53 INFO] reading housekeeping
[Status 11:14:11 INFO] acquire complete
[Status 11:14:12 INFO] writing housekeeping
[Sequencer 11:14:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:14:12 INFO] incremented W scene to 205 completed views
[Sequencer 11:14:12 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:14:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:14:12 INFO] incremented to [AERI set: name X205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:14:12 INFO] W205.SIG(18)
[sigmove 11:14:12 DEBUG] transformed W205Ma.SPC -> W205MA.SPC
[sigmove 11:14:12 DEBUG] transformed W205Mb.SPC -> W205MB.SPC
[sigmove 11:14:12 DEBUG] transformed W205Mc.SPC -> W205MC.SPC
[sigmove 11:14:12 DEBUG] transformed W205Md.SPC -> W205MD.SPC
[sigmove 11:14:12 DEBUG] transformed W205Me.SPC -> W205ME.SPC
[sigmove 11:14:12 DEBUG] transformed W205Mf.SPC -> W205MF.SPC
[Status 11:14:12 INFO] data for W205 transferred to science data processing
[Tidy 11:14:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:14:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:14:12 INFO] resetting WatchDogTimer
[Status 11:14:12 INFO] Starting Set [AERI set: name X205, 6 scans, 0 angle, D16300 command]
[Ingest 11:14:12 INFO] Sending XML status message
[Status 11:14:12 INFO] Mirror angle: 0
[Mirror 11:14:12 INFO] rotating to position X
[Status 11:14:13 INFO] .SET file for ACQ96 ready
[Ingest 11:14:13 INFO] Starting acquisition
[Status 11:14:13 INFO] reading housekeeping
[Status 11:14:31 INFO] acquire complete
[Status 11:14:32 INFO] writing housekeeping
[Sequencer 11:14:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:14:32 INFO] incremented X scene to 205 completed views
[Sequencer 11:14:32 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:14:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:14:32 INFO] incremented to [AERI set: name Y205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:14:32 INFO] X205.SIG(18)
[sigmove 11:14:32 DEBUG] transformed X205Ma.SPC -> X205MA.SPC
[sigmove 11:14:32 DEBUG] transformed X205Mb.SPC -> X205MB.SPC
[sigmove 11:14:32 DEBUG] transformed X205Mc.SPC -> X205MC.SPC
[sigmove 11:14:32 DEBUG] transformed X205Md.SPC -> X205MD.SPC
[sigmove 11:14:32 DEBUG] transformed X205Me.SPC -> X205ME.SPC
[sigmove 11:14:32 DEBUG] transformed X205Mf.SPC -> X205MF.SPC
[Status 11:14:32 INFO] data for X205 transferred to science data processing
[Tidy 11:14:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:14:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:14:32 INFO] resetting WatchDogTimer
[Status 11:14:32 INFO] Starting Set [AERI set: name Y205, 6 scans, 0 angle, D16300 command]
[Ingest 11:14:32 INFO] Sending XML status message
[Status 11:14:32 INFO] Mirror angle: 0
[Mirror 11:14:33 INFO] rotating to position Y
[Status 11:14:33 INFO] .SET file for ACQ96 ready
[Ingest 11:14:33 INFO] Starting acquisition
[Status 11:14:34 INFO] reading housekeeping
[Status 11:14:51 INFO] acquire complete
[Status 11:14:52 INFO] writing housekeeping
[Sequencer 11:14:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:14:52 INFO] incremented Y scene to 205 completed views
[Sequencer 11:14:52 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:14:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:14:52 INFO] incremented to [AERI set: name Z205, 6 scans, 0 angle, D16300 command] set
[sigmove 11:14:52 INFO] Y205.SIG(18)
[sigmove 11:14:52 DEBUG] transformed Y205Ma.SPC -> Y205MA.SPC
[sigmove 11:14:52 DEBUG] transformed Y205Mb.SPC -> Y205MB.SPC
[sigmove 11:14:52 DEBUG] transformed Y205Mc.SPC -> Y205MC.SPC
[sigmove 11:14:52 DEBUG] transformed Y205Md.SPC -> Y205MD.SPC
[sigmove 11:14:52 DEBUG] transformed Y205Me.SPC -> Y205ME.SPC
[sigmove 11:14:52 DEBUG] transformed Y205Mf.SPC -> Y205MF.SPC
[Status 11:14:52 INFO] data for Y205 transferred to science data processing
[Tidy 11:14:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:14:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:14:52 INFO] resetting WatchDogTimer
[Status 11:14:53 INFO] Starting Set [AERI set: name Z205, 6 scans, 0 angle, D16300 command]
[Ingest 11:14:53 INFO] Sending XML status message
[Status 11:14:53 INFO] Mirror angle: 0
[Mirror 11:14:53 INFO] rotating to position Z
[Status 11:14:53 INFO] .SET file for ACQ96 ready
[Ingest 11:14:53 INFO] Starting acquisition
[Status 11:14:54 INFO] reading housekeeping
[Status 11:15:12 INFO] acquire complete
[Status 11:15:12 INFO] writing housekeeping
[Sequencer 11:15:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:15:12 INFO] incremented Z scene to 205 completed views
[Sequencer 11:15:12 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:15:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:15:12 INFO] incremented to [AERI set: name A206, 6 scans, 120 angle, D28300 command] set
[sigmove 11:15:12 INFO] Z205.SIG(18)
[sigmove 11:15:12 DEBUG] transformed Z205Ma.SPC -> Z205MA.SPC
[sigmove 11:15:12 DEBUG] transformed Z205Mb.SPC -> Z205MB.SPC
[sigmove 11:15:12 DEBUG] transformed Z205Mc.SPC -> Z205MC.SPC
[sigmove 11:15:12 DEBUG] transformed Z205Md.SPC -> Z205MD.SPC
[sigmove 11:15:12 DEBUG] transformed Z205Me.SPC -> Z205ME.SPC
[sigmove 11:15:12 DEBUG] transformed Z205Mf.SPC -> Z205MF.SPC
[Status 11:15:12 INFO] data for Z205 transferred to science data processing
[Tidy 11:15:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:15:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:15:12 INFO] resetting WatchDogTimer
[Status 11:15:13 INFO] Starting Set [AERI set: name A206, 6 scans, 120 angle, D28300 command]
[Ingest 11:15:13 INFO] Sending XML status message
[Status 11:15:13 INFO] Mirror angle: 120
[Mirror 11:15:13 INFO] rotating to position A
[Status 11:15:14 INFO] .SET file for ACQ96 ready
[Ingest 11:15:15 INFO] Starting acquisition
[Status 11:15:15 INFO] reading housekeeping
[Status 11:15:33 INFO] acquire complete
[Status 11:15:34 INFO] writing housekeeping
[Sequencer 11:15:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:15:34 INFO] incremented A scene to 206 completed views
[Sequencer 11:15:34 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:15:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:15:34 INFO] incremented to [AERI set: name H206, 6 scans, 60 angle, D22500 command] set
[sigmove 11:15:34 INFO] A206.SIG(18)
[sigmove 11:15:34 DEBUG] transformed A206Ma.SPC -> A206MA.SPC
[sigmove 11:15:34 DEBUG] transformed A206Mb.SPC -> A206MB.SPC
[sigmove 11:15:34 DEBUG] transformed A206Mc.SPC -> A206MC.SPC
[sigmove 11:15:34 DEBUG] transformed A206Md.SPC -> A206MD.SPC
[sigmove 11:15:34 DEBUG] transformed A206Me.SPC -> A206ME.SPC
[sigmove 11:15:34 DEBUG] transformed A206Mf.SPC -> A206MF.SPC
[Status 11:15:34 INFO] data for A206 transferred to science data processing
[Tidy 11:15:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:15:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:15:34 INFO] resetting WatchDogTimer
[Status 11:15:34 INFO] Starting Set [AERI set: name H206, 6 scans, 60 angle, D22500 command]
[Ingest 11:15:34 INFO] Sending XML status message
[Status 11:15:34 INFO] Mirror angle: 60
[Mirror 11:15:34 INFO] rotating to position H
[Status 11:15:35 INFO] .SET file for ACQ96 ready
[Ingest 11:15:35 INFO] Starting acquisition
[Status 11:15:36 INFO] reading housekeeping
[Status 11:15:53 INFO] acquire complete
[Status 11:15:54 INFO] writing housekeeping
[Sequencer 11:15:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:15:54 INFO] incremented H scene to 206 completed views
[Sequencer 11:15:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:15:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:15:54 INFO] incremented to [AERI set: name S206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:15:54 INFO] H206.SIG(18)
[sigmove 11:15:54 DEBUG] transformed H206Ma.SPC -> H206MA.SPC
[sigmove 11:15:54 DEBUG] transformed H206Mb.SPC -> H206MB.SPC
[sigmove 11:15:54 DEBUG] transformed H206Mc.SPC -> H206MC.SPC
[sigmove 11:15:54 DEBUG] transformed H206Md.SPC -> H206MD.SPC
[sigmove 11:15:54 DEBUG] transformed H206Me.SPC -> H206ME.SPC
[sigmove 11:15:54 DEBUG] transformed H206Mf.SPC -> H206MF.SPC
[Status 11:15:54 INFO] data for H206 transferred to science data processing
[Tidy 11:15:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:15:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:15:54 INFO] resetting WatchDogTimer
[Status 11:15:54 INFO] Starting Set [AERI set: name S206, 6 scans, 0 angle, D16300 command]
[Ingest 11:15:54 INFO] Sending XML status message
[Status 11:15:54 INFO] Mirror angle: 0
[Mirror 11:15:55 INFO] rotating to position S
[Status 11:15:55 INFO] .SET file for ACQ96 ready
[Ingest 11:15:56 INFO] Starting acquisition
[Status 11:15:56 INFO] reading housekeeping
[Status 11:16:13 INFO] acquire complete
[Status 11:16:14 INFO] writing housekeeping
[Sequencer 11:16:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:16:14 INFO] incremented S scene to 206 completed views
[Sequencer 11:16:14 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:16:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:16:14 INFO] incremented to [AERI set: name T206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:16:14 INFO] S206.SIG(18)
[sigmove 11:16:14 DEBUG] transformed S206Ma.SPC -> S206MA.SPC
[sigmove 11:16:14 DEBUG] transformed S206Mb.SPC -> S206MB.SPC
[sigmove 11:16:14 DEBUG] transformed S206Mc.SPC -> S206MC.SPC
[sigmove 11:16:14 DEBUG] transformed S206Md.SPC -> S206MD.SPC
[sigmove 11:16:14 DEBUG] transformed S206Me.SPC -> S206ME.SPC
[sigmove 11:16:14 DEBUG] transformed S206Mf.SPC -> S206MF.SPC
[Status 11:16:14 INFO] data for S206 transferred to science data processing
[Tidy 11:16:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:16:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:16:14 INFO] resetting WatchDogTimer
[Status 11:16:14 INFO] Starting Set [AERI set: name T206, 6 scans, 0 angle, D16300 command]
[Ingest 11:16:14 INFO] Sending XML status message
[Status 11:16:14 INFO] Mirror angle: 0
[Mirror 11:16:15 INFO] rotating to position T
[Status 11:16:15 INFO] .SET file for ACQ96 ready
[Ingest 11:16:15 INFO] Starting acquisition
[Status 11:16:16 INFO] reading housekeeping
[Status 11:16:34 INFO] acquire complete
[Status 11:16:34 INFO] writing housekeeping
[Sequencer 11:16:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:16:34 INFO] incremented T scene to 206 completed views
[Sequencer 11:16:34 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:16:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:16:34 INFO] incremented to [AERI set: name U206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:16:34 INFO] T206.SIG(18)
[sigmove 11:16:34 DEBUG] transformed T206Ma.SPC -> T206MA.SPC
[sigmove 11:16:34 DEBUG] transformed T206Mb.SPC -> T206MB.SPC
[sigmove 11:16:34 DEBUG] transformed T206Mc.SPC -> T206MC.SPC
[sigmove 11:16:34 DEBUG] transformed T206Md.SPC -> T206MD.SPC
[sigmove 11:16:34 DEBUG] transformed T206Me.SPC -> T206ME.SPC
[sigmove 11:16:34 DEBUG] transformed T206Mf.SPC -> T206MF.SPC
[Status 11:16:34 INFO] data for T206 transferred to science data processing
[Tidy 11:16:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:16:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:16:34 INFO] resetting WatchDogTimer
[Status 11:16:35 INFO] Starting Set [AERI set: name U206, 6 scans, 0 angle, D16300 command]
[Ingest 11:16:35 INFO] Sending XML status message
[Status 11:16:35 INFO] Mirror angle: 0
[Mirror 11:16:35 INFO] rotating to position U
[Status 11:16:35 INFO] .SET file for ACQ96 ready
[Ingest 11:16:36 INFO] Starting acquisition
[Status 11:16:36 INFO] reading housekeeping
[Status 11:16:54 INFO] acquire complete
[Status 11:16:55 INFO] writing housekeeping
[Sequencer 11:16:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:16:55 INFO] incremented U scene to 206 completed views
[Sequencer 11:16:55 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:16:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:16:55 INFO] incremented to [AERI set: name V206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:16:55 INFO] U206.SIG(18)
[sigmove 11:16:55 DEBUG] transformed U206Ma.SPC -> U206MA.SPC
[sigmove 11:16:55 DEBUG] transformed U206Mb.SPC -> U206MB.SPC
[sigmove 11:16:55 DEBUG] transformed U206Mc.SPC -> U206MC.SPC
[sigmove 11:16:55 DEBUG] transformed U206Md.SPC -> U206MD.SPC
[sigmove 11:16:55 DEBUG] transformed U206Me.SPC -> U206ME.SPC
[sigmove 11:16:55 DEBUG] transformed U206Mf.SPC -> U206MF.SPC
[Status 11:16:55 INFO] data for U206 transferred to science data processing
[Tidy 11:16:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:16:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:16:55 INFO] resetting WatchDogTimer
[Status 11:16:55 INFO] Starting Set [AERI set: name V206, 6 scans, 0 angle, D16300 command]
[Ingest 11:16:55 INFO] Sending XML status message
[Status 11:16:55 INFO] Mirror angle: 0
[Mirror 11:16:55 INFO] rotating to position V
[Status 11:16:56 INFO] .SET file for ACQ96 ready
[Ingest 11:16:56 INFO] Starting acquisition
[Status 11:16:56 INFO] reading housekeeping
[Status 11:17:14 INFO] acquire complete
[Status 11:17:15 INFO] writing housekeeping
[Sequencer 11:17:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:17:15 INFO] incremented V scene to 206 completed views
[Sequencer 11:17:15 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:17:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:17:15 INFO] incremented to [AERI set: name W206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:17:15 INFO] V206.SIG(18)
[sigmove 11:17:15 DEBUG] transformed V206Ma.SPC -> V206MA.SPC
[sigmove 11:17:15 DEBUG] transformed V206Mb.SPC -> V206MB.SPC
[sigmove 11:17:15 DEBUG] transformed V206Mc.SPC -> V206MC.SPC
[sigmove 11:17:15 DEBUG] transformed V206Md.SPC -> V206MD.SPC
[sigmove 11:17:15 DEBUG] transformed V206Me.SPC -> V206ME.SPC
[sigmove 11:17:15 DEBUG] transformed V206Mf.SPC -> V206MF.SPC
[Status 11:17:15 INFO] data for V206 transferred to science data processing
[Tidy 11:17:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:17:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:17:15 INFO] resetting WatchDogTimer
[Status 11:17:15 INFO] Starting Set [AERI set: name W206, 6 scans, 0 angle, D16300 command]
[Ingest 11:17:15 INFO] Sending XML status message
[Status 11:17:15 INFO] Mirror angle: 0
[Mirror 11:17:15 INFO] rotating to position W
[Status 11:17:16 INFO] .SET file for ACQ96 ready
[Ingest 11:17:16 INFO] Starting acquisition
[Status 11:17:16 INFO] reading housekeeping
[Status 11:17:34 INFO] acquire complete
[Status 11:17:35 INFO] writing housekeeping
[Sequencer 11:17:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:17:35 INFO] incremented W scene to 206 completed views
[Sequencer 11:17:35 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:17:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:17:35 INFO] incremented to [AERI set: name X206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:17:35 INFO] W206.SIG(18)
[sigmove 11:17:35 DEBUG] transformed W206Ma.SPC -> W206MA.SPC
[sigmove 11:17:35 DEBUG] transformed W206Mb.SPC -> W206MB.SPC
[sigmove 11:17:35 DEBUG] transformed W206Mc.SPC -> W206MC.SPC
[sigmove 11:17:35 DEBUG] transformed W206Md.SPC -> W206MD.SPC
[sigmove 11:17:35 DEBUG] transformed W206Me.SPC -> W206ME.SPC
[sigmove 11:17:35 DEBUG] transformed W206Mf.SPC -> W206MF.SPC
[Status 11:17:35 INFO] data for W206 transferred to science data processing
[Tidy 11:17:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:17:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:17:35 INFO] resetting WatchDogTimer
[Status 11:17:35 INFO] Starting Set [AERI set: name X206, 6 scans, 0 angle, D16300 command]
[Ingest 11:17:35 INFO] Sending XML status message
[Status 11:17:35 INFO] Mirror angle: 0
[Mirror 11:17:36 INFO] rotating to position X
[Status 11:17:36 INFO] .SET file for ACQ96 ready
[Ingest 11:17:36 INFO] Starting acquisition
[Status 11:17:36 INFO] reading housekeeping
[Status 11:17:54 INFO] acquire complete
[Status 11:17:55 INFO] writing housekeeping
[Sequencer 11:17:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:17:55 INFO] incremented X scene to 206 completed views
[Sequencer 11:17:55 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:17:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:17:55 INFO] incremented to [AERI set: name Y206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:17:55 INFO] X206.SIG(18)
[sigmove 11:17:55 DEBUG] transformed X206Ma.SPC -> X206MA.SPC
[sigmove 11:17:55 DEBUG] transformed X206Mb.SPC -> X206MB.SPC
[sigmove 11:17:55 DEBUG] transformed X206Mc.SPC -> X206MC.SPC
[sigmove 11:17:55 DEBUG] transformed X206Md.SPC -> X206MD.SPC
[sigmove 11:17:55 DEBUG] transformed X206Me.SPC -> X206ME.SPC
[sigmove 11:17:55 DEBUG] transformed X206Mf.SPC -> X206MF.SPC
[Status 11:17:55 INFO] data for X206 transferred to science data processing
[Tidy 11:17:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:17:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:17:55 INFO] resetting WatchDogTimer
[Status 11:17:55 INFO] Starting Set [AERI set: name Y206, 6 scans, 0 angle, D16300 command]
[Ingest 11:17:55 INFO] Sending XML status message
[Status 11:17:55 INFO] Mirror angle: 0
[Mirror 11:17:56 INFO] rotating to position Y
[Status 11:17:56 INFO] .SET file for ACQ96 ready
[Ingest 11:17:56 INFO] Starting acquisition
[Status 11:17:57 INFO] reading housekeeping
[Status 11:18:14 INFO] acquire complete
[Status 11:18:15 INFO] writing housekeeping
[Sequencer 11:18:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:18:15 INFO] incremented Y scene to 206 completed views
[Sequencer 11:18:15 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:18:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:18:15 INFO] incremented to [AERI set: name Z206, 6 scans, 0 angle, D16300 command] set
[sigmove 11:18:15 INFO] Y206.SIG(18)
[sigmove 11:18:15 DEBUG] transformed Y206Ma.SPC -> Y206MA.SPC
[sigmove 11:18:15 DEBUG] transformed Y206Mb.SPC -> Y206MB.SPC
[sigmove 11:18:15 DEBUG] transformed Y206Mc.SPC -> Y206MC.SPC
[sigmove 11:18:15 DEBUG] transformed Y206Md.SPC -> Y206MD.SPC
[sigmove 11:18:15 DEBUG] transformed Y206Me.SPC -> Y206ME.SPC
[sigmove 11:18:15 DEBUG] transformed Y206Mf.SPC -> Y206MF.SPC
[Status 11:18:15 INFO] data for Y206 transferred to science data processing
[Tidy 11:18:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:18:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:18:15 INFO] resetting WatchDogTimer
[Status 11:18:16 INFO] Starting Set [AERI set: name Z206, 6 scans, 0 angle, D16300 command]
[Ingest 11:18:16 INFO] Sending XML status message
[Status 11:18:16 INFO] Mirror angle: 0
[Mirror 11:18:16 INFO] rotating to position Z
[Status 11:18:16 INFO] .SET file for ACQ96 ready
[Ingest 11:18:16 INFO] Starting acquisition
[Status 11:18:17 INFO] reading housekeeping
[Status 11:18:35 INFO] acquire complete
[Status 11:18:35 INFO] writing housekeeping
[Sequencer 11:18:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:18:35 INFO] incremented Z scene to 206 completed views
[Sequencer 11:18:35 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:18:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:18:35 INFO] incremented to [AERI set: name H207, 6 scans, 60 angle, D22500 command] set
[sigmove 11:18:35 INFO] Z206.SIG(18)
[sigmove 11:18:35 DEBUG] transformed Z206Ma.SPC -> Z206MA.SPC
[sigmove 11:18:35 DEBUG] transformed Z206Mb.SPC -> Z206MB.SPC
[sigmove 11:18:35 DEBUG] transformed Z206Mc.SPC -> Z206MC.SPC
[sigmove 11:18:35 DEBUG] transformed Z206Md.SPC -> Z206MD.SPC
[sigmove 11:18:35 DEBUG] transformed Z206Me.SPC -> Z206ME.SPC
[sigmove 11:18:35 DEBUG] transformed Z206Mf.SPC -> Z206MF.SPC
[Status 11:18:35 INFO] data for Z206 transferred to science data processing
[Tidy 11:18:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:18:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:18:35 INFO] resetting WatchDogTimer
[Status 11:18:36 INFO] Starting Set [AERI set: name H207, 6 scans, 60 angle, D22500 command]
[Ingest 11:18:36 INFO] Sending XML status message
[Status 11:18:36 INFO] Mirror angle: 60
[Mirror 11:18:36 INFO] rotating to position H
[Status 11:18:37 INFO] .SET file for ACQ96 ready
[Ingest 11:18:37 INFO] Starting acquisition
[Status 11:18:38 INFO] reading housekeeping
[Status 11:18:55 INFO] acquire complete
[Status 11:18:56 INFO] writing housekeeping
[Sequencer 11:18:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:18:56 INFO] incremented H scene to 207 completed views
[Sequencer 11:18:56 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:18:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:18:56 INFO] incremented to [AERI set: name A207, 6 scans, 120 angle, D28300 command] set
[sigmove 11:18:56 INFO] H207.SIG(18)
[sigmove 11:18:56 DEBUG] transformed H207Ma.SPC -> H207MA.SPC
[sigmove 11:18:56 DEBUG] transformed H207Mb.SPC -> H207MB.SPC
[sigmove 11:18:56 DEBUG] transformed H207Mc.SPC -> H207MC.SPC
[sigmove 11:18:56 DEBUG] transformed H207Md.SPC -> H207MD.SPC
[sigmove 11:18:56 DEBUG] transformed H207Me.SPC -> H207ME.SPC
[sigmove 11:18:56 DEBUG] transformed H207Mf.SPC -> H207MF.SPC
[Status 11:18:56 INFO] data for H207 transferred to science data processing
[Tidy 11:18:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:18:56 INFO] A205.FIN(19),H205.FIN(19),S205.FIN(19),T205.FIN(19),U205.FIN(19),V205.FIN(19),W205.FIN(19),X205.FIN(19),Y205.FIN(19),Z205.FIN(19),A206.FIN(19),H206.FIN(19),S206.FIN(19),T206.FIN(19),U206.FIN(19),V206.FIN(19),W206.FIN(19),X206.FIN(19),Y206.FIN(19),Z206.FIN(19)
[sigmove 11:18:56 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:18:56 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:18:59 DEBUG] done zipping
[WatchDog 11:19:00 INFO] resetting WatchDogTimer
[Status 11:19:00 INFO] Starting Set [AERI set: name A207, 6 scans, 120 angle, D28300 command]
[Ingest 11:19:00 INFO] Sending XML status message
[Status 11:19:00 INFO] Mirror angle: 120
[Mirror 11:19:00 INFO] rotating to position A
[Status 11:19:01 INFO] .SET file for ACQ96 ready
[Ingest 11:19:01 INFO] Starting acquisition
[Status 11:19:02 INFO] reading housekeeping
[Status 11:19:20 INFO] acquire complete
[Status 11:19:20 INFO] writing housekeeping
[Sequencer 11:19:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:19:20 INFO] incremented A scene to 207 completed views
[Sequencer 11:19:20 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:19:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:19:20 INFO] incremented to [AERI set: name S207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:19:20 INFO] A207.SIG(18)
[sigmove 11:19:20 DEBUG] transformed A207Ma.SPC -> A207MA.SPC
[sigmove 11:19:20 DEBUG] transformed A207Mb.SPC -> A207MB.SPC
[sigmove 11:19:20 DEBUG] transformed A207Mc.SPC -> A207MC.SPC
[sigmove 11:19:20 DEBUG] transformed A207Md.SPC -> A207MD.SPC
[sigmove 11:19:20 DEBUG] transformed A207Me.SPC -> A207ME.SPC
[sigmove 11:19:20 DEBUG] transformed A207Mf.SPC -> A207MF.SPC
[Status 11:19:20 INFO] data for A207 transferred to science data processing
[Tidy 11:19:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:19:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:19:20 INFO] resetting WatchDogTimer
[Status 11:19:21 INFO] Starting Set [AERI set: name S207, 6 scans, 0 angle, D16300 command]
[Ingest 11:19:21 INFO] Sending XML status message
[Status 11:19:21 INFO] Mirror angle: 0
[Mirror 11:19:21 INFO] rotating to position S
[Status 11:19:22 INFO] .SET file for ACQ96 ready
[Ingest 11:19:23 INFO] Starting acquisition
[Status 11:19:23 INFO] reading housekeeping
[Status 11:19:41 INFO] acquire complete
[Status 11:19:42 INFO] writing housekeeping
[Sequencer 11:19:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:19:42 INFO] incremented S scene to 207 completed views
[Sequencer 11:19:42 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:19:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:19:42 INFO] incremented to [AERI set: name T207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:19:42 INFO] S207.SIG(18)
[sigmove 11:19:42 DEBUG] transformed S207Ma.SPC -> S207MA.SPC
[sigmove 11:19:42 DEBUG] transformed S207Mb.SPC -> S207MB.SPC
[sigmove 11:19:42 DEBUG] transformed S207Mc.SPC -> S207MC.SPC
[sigmove 11:19:42 DEBUG] transformed S207Md.SPC -> S207MD.SPC
[sigmove 11:19:42 DEBUG] transformed S207Me.SPC -> S207ME.SPC
[sigmove 11:19:42 DEBUG] transformed S207Mf.SPC -> S207MF.SPC
[Status 11:19:42 INFO] data for S207 transferred to science data processing
[Tidy 11:19:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:19:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:19:42 INFO] resetting WatchDogTimer
[Status 11:19:42 INFO] Starting Set [AERI set: name T207, 6 scans, 0 angle, D16300 command]
[Ingest 11:19:42 INFO] Sending XML status message
[Status 11:19:42 INFO] Mirror angle: 0
[Mirror 11:19:42 INFO] rotating to position T
[Status 11:19:43 INFO] .SET file for ACQ96 ready
[Ingest 11:19:43 INFO] Starting acquisition
[Status 11:19:43 INFO] reading housekeeping
[Status 11:20:01 INFO] acquire complete
[Status 11:20:02 INFO] writing housekeeping
[Sequencer 11:20:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:20:02 INFO] incremented T scene to 207 completed views
[Sequencer 11:20:02 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:20:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:20:02 INFO] incremented to [AERI set: name U207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:20:02 INFO] T207.SIG(18)
[sigmove 11:20:02 DEBUG] transformed T207Ma.SPC -> T207MA.SPC
[sigmove 11:20:02 DEBUG] transformed T207Mb.SPC -> T207MB.SPC
[sigmove 11:20:02 DEBUG] transformed T207Mc.SPC -> T207MC.SPC
[sigmove 11:20:02 DEBUG] transformed T207Md.SPC -> T207MD.SPC
[sigmove 11:20:02 DEBUG] transformed T207Me.SPC -> T207ME.SPC
[sigmove 11:20:02 DEBUG] transformed T207Mf.SPC -> T207MF.SPC
[Status 11:20:02 INFO] data for T207 transferred to science data processing
[Tidy 11:20:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:20:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:20:02 INFO] resetting WatchDogTimer
[Status 11:20:02 INFO] Starting Set [AERI set: name U207, 6 scans, 0 angle, D16300 command]
[Ingest 11:20:02 INFO] Sending XML status message
[Status 11:20:02 INFO] Mirror angle: 0
[Mirror 11:20:02 INFO] rotating to position U
[Status 11:20:03 INFO] .SET file for ACQ96 ready
[Ingest 11:20:03 INFO] Starting acquisition
[Status 11:20:03 INFO] reading housekeeping
[Status 11:20:21 INFO] acquire complete
[Status 11:20:22 INFO] writing housekeeping
[Sequencer 11:20:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:20:22 INFO] incremented U scene to 207 completed views
[Sequencer 11:20:22 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:20:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:20:22 INFO] incremented to [AERI set: name V207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:20:22 INFO] U207.SIG(18)
[sigmove 11:20:22 DEBUG] transformed U207Ma.SPC -> U207MA.SPC
[sigmove 11:20:22 DEBUG] transformed U207Mb.SPC -> U207MB.SPC
[sigmove 11:20:22 DEBUG] transformed U207Mc.SPC -> U207MC.SPC
[sigmove 11:20:22 DEBUG] transformed U207Md.SPC -> U207MD.SPC
[sigmove 11:20:22 DEBUG] transformed U207Me.SPC -> U207ME.SPC
[sigmove 11:20:22 DEBUG] transformed U207Mf.SPC -> U207MF.SPC
[Status 11:20:22 INFO] data for U207 transferred to science data processing
[Tidy 11:20:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:20:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:20:22 INFO] resetting WatchDogTimer
[Status 11:20:22 INFO] Starting Set [AERI set: name V207, 6 scans, 0 angle, D16300 command]
[Ingest 11:20:22 INFO] Sending XML status message
[Status 11:20:22 INFO] Mirror angle: 0
[Mirror 11:20:23 INFO] rotating to position V
[Status 11:20:23 INFO] .SET file for ACQ96 ready
[Ingest 11:20:23 INFO] Starting acquisition
[Status 11:20:24 INFO] reading housekeeping
[Status 11:20:41 INFO] acquire complete
[Status 11:20:42 INFO] writing housekeeping
[Sequencer 11:20:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:20:42 INFO] incremented V scene to 207 completed views
[Sequencer 11:20:42 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:20:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:20:42 INFO] incremented to [AERI set: name W207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:20:42 INFO] V207.SIG(18)
[sigmove 11:20:42 DEBUG] transformed V207Ma.SPC -> V207MA.SPC
[sigmove 11:20:42 DEBUG] transformed V207Mb.SPC -> V207MB.SPC
[sigmove 11:20:42 DEBUG] transformed V207Mc.SPC -> V207MC.SPC
[sigmove 11:20:42 DEBUG] transformed V207Md.SPC -> V207MD.SPC
[sigmove 11:20:42 DEBUG] transformed V207Me.SPC -> V207ME.SPC
[sigmove 11:20:42 DEBUG] transformed V207Mf.SPC -> V207MF.SPC
[Status 11:20:42 INFO] data for V207 transferred to science data processing
[Tidy 11:20:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:20:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:20:42 INFO] resetting WatchDogTimer
[Status 11:20:43 INFO] Starting Set [AERI set: name W207, 6 scans, 0 angle, D16300 command]
[Ingest 11:20:43 INFO] Sending XML status message
[Status 11:20:43 INFO] Mirror angle: 0
[Mirror 11:20:43 INFO] rotating to position W
[Status 11:20:43 INFO] .SET file for ACQ96 ready
[Ingest 11:20:43 INFO] Starting acquisition
[Status 11:20:44 INFO] reading housekeeping
[Status 11:21:02 INFO] acquire complete
[Status 11:21:02 INFO] writing housekeeping
[Sequencer 11:21:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:21:02 INFO] incremented W scene to 207 completed views
[Sequencer 11:21:02 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:21:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:21:02 INFO] incremented to [AERI set: name X207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:21:02 INFO] W207.SIG(18)
[sigmove 11:21:02 DEBUG] transformed W207Ma.SPC -> W207MA.SPC
[sigmove 11:21:02 DEBUG] transformed W207Mb.SPC -> W207MB.SPC
[sigmove 11:21:02 DEBUG] transformed W207Mc.SPC -> W207MC.SPC
[sigmove 11:21:02 DEBUG] transformed W207Md.SPC -> W207MD.SPC
[sigmove 11:21:02 DEBUG] transformed W207Me.SPC -> W207ME.SPC
[sigmove 11:21:02 DEBUG] transformed W207Mf.SPC -> W207MF.SPC
[Status 11:21:02 INFO] data for W207 transferred to science data processing
[Tidy 11:21:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:21:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:21:02 INFO] resetting WatchDogTimer
[Status 11:21:03 INFO] Starting Set [AERI set: name X207, 6 scans, 0 angle, D16300 command]
[Ingest 11:21:03 INFO] Sending XML status message
[Status 11:21:03 INFO] Mirror angle: 0
[Mirror 11:21:03 INFO] rotating to position X
[Status 11:21:03 INFO] .SET file for ACQ96 ready
[Ingest 11:21:04 INFO] Starting acquisition
[Status 11:21:04 INFO] reading housekeeping
[Status 11:21:22 INFO] acquire complete
[Status 11:21:23 INFO] writing housekeeping
[Sequencer 11:21:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:21:23 INFO] incremented X scene to 207 completed views
[Sequencer 11:21:23 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:21:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:21:23 INFO] incremented to [AERI set: name Y207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:21:23 INFO] X207.SIG(18)
[sigmove 11:21:23 DEBUG] transformed X207Ma.SPC -> X207MA.SPC
[sigmove 11:21:23 DEBUG] transformed X207Mb.SPC -> X207MB.SPC
[sigmove 11:21:23 DEBUG] transformed X207Mc.SPC -> X207MC.SPC
[sigmove 11:21:23 DEBUG] transformed X207Md.SPC -> X207MD.SPC
[sigmove 11:21:23 DEBUG] transformed X207Me.SPC -> X207ME.SPC
[sigmove 11:21:23 DEBUG] transformed X207Mf.SPC -> X207MF.SPC
[Status 11:21:23 INFO] data for X207 transferred to science data processing
[Tidy 11:21:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:21:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:21:23 INFO] resetting WatchDogTimer
[Status 11:21:23 INFO] Starting Set [AERI set: name Y207, 6 scans, 0 angle, D16300 command]
[Ingest 11:21:23 INFO] Sending XML status message
[Status 11:21:23 INFO] Mirror angle: 0
[Mirror 11:21:23 INFO] rotating to position Y
[Status 11:21:24 INFO] .SET file for ACQ96 ready
[Ingest 11:21:24 INFO] Starting acquisition
[Status 11:21:24 INFO] reading housekeeping
[Status 11:21:42 INFO] acquire complete
[Status 11:21:43 INFO] writing housekeeping
[Sequencer 11:21:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:21:43 INFO] incremented Y scene to 207 completed views
[Sequencer 11:21:43 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:21:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:21:43 INFO] incremented to [AERI set: name Z207, 6 scans, 0 angle, D16300 command] set
[sigmove 11:21:43 INFO] Y207.SIG(18)
[sigmove 11:21:43 DEBUG] transformed Y207Ma.SPC -> Y207MA.SPC
[sigmove 11:21:43 DEBUG] transformed Y207Mb.SPC -> Y207MB.SPC
[sigmove 11:21:43 DEBUG] transformed Y207Mc.SPC -> Y207MC.SPC
[sigmove 11:21:43 DEBUG] transformed Y207Md.SPC -> Y207MD.SPC
[sigmove 11:21:43 DEBUG] transformed Y207Me.SPC -> Y207ME.SPC
[sigmove 11:21:43 DEBUG] transformed Y207Mf.SPC -> Y207MF.SPC
[Status 11:21:43 INFO] data for Y207 transferred to science data processing
[Tidy 11:21:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:21:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:21:43 INFO] resetting WatchDogTimer
[Status 11:21:43 INFO] Starting Set [AERI set: name Z207, 6 scans, 0 angle, D16300 command]
[Ingest 11:21:43 INFO] Sending XML status message
[Status 11:21:43 INFO] Mirror angle: 0
[Mirror 11:21:44 INFO] rotating to position Z
[Status 11:21:44 INFO] .SET file for ACQ96 ready
[Ingest 11:21:44 INFO] Starting acquisition
[Status 11:21:44 INFO] reading housekeeping
[Status 11:22:02 INFO] acquire complete
[Status 11:22:03 INFO] writing housekeeping
[Sequencer 11:22:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:22:03 INFO] incremented Z scene to 207 completed views
[Sequencer 11:22:03 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:22:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:22:03 INFO] incremented to [AERI set: name A208, 6 scans, 120 angle, D28300 command] set
[sigmove 11:22:03 INFO] Z207.SIG(18)
[sigmove 11:22:03 DEBUG] transformed Z207Ma.SPC -> Z207MA.SPC
[sigmove 11:22:03 DEBUG] transformed Z207Mb.SPC -> Z207MB.SPC
[sigmove 11:22:03 DEBUG] transformed Z207Mc.SPC -> Z207MC.SPC
[sigmove 11:22:03 DEBUG] transformed Z207Md.SPC -> Z207MD.SPC
[sigmove 11:22:03 DEBUG] transformed Z207Me.SPC -> Z207ME.SPC
[sigmove 11:22:03 DEBUG] transformed Z207Mf.SPC -> Z207MF.SPC
[Status 11:22:03 INFO] data for Z207 transferred to science data processing
[Tidy 11:22:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:22:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:22:03 INFO] resetting WatchDogTimer
[Status 11:22:03 INFO] Starting Set [AERI set: name A208, 6 scans, 120 angle, D28300 command]
[Ingest 11:22:03 INFO] Sending XML status message
[Status 11:22:03 INFO] Mirror angle: 120
[Mirror 11:22:04 INFO] rotating to position A
[Status 11:22:05 INFO] .SET file for ACQ96 ready
[Ingest 11:22:05 INFO] Starting acquisition
[Status 11:22:06 INFO] reading housekeeping
[Status 11:22:24 INFO] acquire complete
[Status 11:22:24 INFO] writing housekeeping
[Sequencer 11:22:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:22:24 INFO] incremented A scene to 208 completed views
[Sequencer 11:22:24 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:22:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:22:24 INFO] incremented to [AERI set: name H208, 6 scans, 60 angle, D22500 command] set
[sigmove 11:22:24 INFO] A208.SIG(18)
[sigmove 11:22:24 DEBUG] transformed A208Ma.SPC -> A208MA.SPC
[sigmove 11:22:24 DEBUG] transformed A208Mb.SPC -> A208MB.SPC
[sigmove 11:22:24 DEBUG] transformed A208Mc.SPC -> A208MC.SPC
[sigmove 11:22:24 DEBUG] transformed A208Md.SPC -> A208MD.SPC
[sigmove 11:22:24 DEBUG] transformed A208Me.SPC -> A208ME.SPC
[sigmove 11:22:24 DEBUG] transformed A208Mf.SPC -> A208MF.SPC
[Status 11:22:24 INFO] data for A208 transferred to science data processing
[Tidy 11:22:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:22:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:22:24 INFO] resetting WatchDogTimer
[Status 11:22:25 INFO] Starting Set [AERI set: name H208, 6 scans, 60 angle, D22500 command]
[Ingest 11:22:25 INFO] Sending XML status message
[Status 11:22:25 INFO] Mirror angle: 60
[Mirror 11:22:25 INFO] rotating to position H
[Status 11:22:26 INFO] .SET file for ACQ96 ready
[Ingest 11:22:26 INFO] Starting acquisition
[Status 11:22:26 INFO] reading housekeeping
[Status 11:22:44 INFO] acquire complete
[Status 11:22:45 INFO] writing housekeeping
[Sequencer 11:22:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:22:45 INFO] incremented H scene to 208 completed views
[Sequencer 11:22:45 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:22:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:22:45 INFO] incremented to [AERI set: name S208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:22:45 INFO] H208.SIG(18)
[sigmove 11:22:45 DEBUG] transformed H208Ma.SPC -> H208MA.SPC
[sigmove 11:22:45 DEBUG] transformed H208Mb.SPC -> H208MB.SPC
[sigmove 11:22:45 DEBUG] transformed H208Mc.SPC -> H208MC.SPC
[sigmove 11:22:45 DEBUG] transformed H208Md.SPC -> H208MD.SPC
[sigmove 11:22:45 DEBUG] transformed H208Me.SPC -> H208ME.SPC
[sigmove 11:22:45 DEBUG] transformed H208Mf.SPC -> H208MF.SPC
[Status 11:22:45 INFO] data for H208 transferred to science data processing
[Tidy 11:22:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:22:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:22:45 INFO] resetting WatchDogTimer
[Status 11:22:45 INFO] Starting Set [AERI set: name S208, 6 scans, 0 angle, D16300 command]
[Ingest 11:22:45 INFO] Sending XML status message
[Status 11:22:45 INFO] Mirror angle: 0
[Mirror 11:22:45 INFO] rotating to position S
[Status 11:22:46 INFO] .SET file for ACQ96 ready
[Ingest 11:22:46 INFO] Starting acquisition
[Status 11:22:47 INFO] reading housekeeping
[Status 11:23:05 INFO] acquire complete
[Status 11:23:06 INFO] writing housekeeping
[Sequencer 11:23:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:23:06 INFO] incremented S scene to 208 completed views
[Sequencer 11:23:06 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:23:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:23:06 INFO] incremented to [AERI set: name T208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:23:06 INFO] S208.SIG(18)
[sigmove 11:23:06 DEBUG] transformed S208Ma.SPC -> S208MA.SPC
[sigmove 11:23:06 DEBUG] transformed S208Mb.SPC -> S208MB.SPC
[sigmove 11:23:06 DEBUG] transformed S208Mc.SPC -> S208MC.SPC
[sigmove 11:23:06 DEBUG] transformed S208Md.SPC -> S208MD.SPC
[sigmove 11:23:06 DEBUG] transformed S208Me.SPC -> S208ME.SPC
[sigmove 11:23:06 DEBUG] transformed S208Mf.SPC -> S208MF.SPC
[Status 11:23:06 INFO] data for S208 transferred to science data processing
[Tidy 11:23:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:23:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:23:06 INFO] resetting WatchDogTimer
[Status 11:23:06 INFO] Starting Set [AERI set: name T208, 6 scans, 0 angle, D16300 command]
[Ingest 11:23:06 INFO] Sending XML status message
[Status 11:23:06 INFO] Mirror angle: 0
[Mirror 11:23:06 INFO] rotating to position T
[Status 11:23:07 INFO] .SET file for ACQ96 ready
[Ingest 11:23:07 INFO] Starting acquisition
[Status 11:23:07 INFO] reading housekeeping
[Status 11:23:25 INFO] acquire complete
[Status 11:23:26 INFO] writing housekeeping
[Sequencer 11:23:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:23:26 INFO] incremented T scene to 208 completed views
[Sequencer 11:23:26 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:23:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:23:26 INFO] incremented to [AERI set: name U208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:23:26 INFO] T208.SIG(18)
[sigmove 11:23:26 DEBUG] transformed T208Ma.SPC -> T208MA.SPC
[sigmove 11:23:26 DEBUG] transformed T208Mb.SPC -> T208MB.SPC
[sigmove 11:23:26 DEBUG] transformed T208Mc.SPC -> T208MC.SPC
[sigmove 11:23:26 DEBUG] transformed T208Md.SPC -> T208MD.SPC
[sigmove 11:23:26 DEBUG] transformed T208Me.SPC -> T208ME.SPC
[sigmove 11:23:26 DEBUG] transformed T208Mf.SPC -> T208MF.SPC
[Status 11:23:26 INFO] data for T208 transferred to science data processing
[Tidy 11:23:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:23:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:23:26 INFO] resetting WatchDogTimer
[Status 11:23:27 INFO] Starting Set [AERI set: name U208, 6 scans, 0 angle, D16300 command]
[Ingest 11:23:27 INFO] Sending XML status message
[Status 11:23:27 INFO] Mirror angle: 0
[Mirror 11:23:27 INFO] rotating to position U
[Status 11:23:27 INFO] .SET file for ACQ96 ready
[Ingest 11:23:28 INFO] Starting acquisition
[Status 11:23:28 INFO] reading housekeeping
[Status 11:23:45 INFO] acquire complete
[Status 11:23:46 INFO] writing housekeeping
[Sequencer 11:23:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:23:46 INFO] incremented U scene to 208 completed views
[Sequencer 11:23:46 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:23:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:23:46 INFO] incremented to [AERI set: name V208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:23:46 INFO] U208.SIG(18)
[sigmove 11:23:46 DEBUG] transformed U208Ma.SPC -> U208MA.SPC
[sigmove 11:23:46 DEBUG] transformed U208Mb.SPC -> U208MB.SPC
[sigmove 11:23:46 DEBUG] transformed U208Mc.SPC -> U208MC.SPC
[sigmove 11:23:46 DEBUG] transformed U208Md.SPC -> U208MD.SPC
[sigmove 11:23:46 DEBUG] transformed U208Me.SPC -> U208ME.SPC
[sigmove 11:23:46 DEBUG] transformed U208Mf.SPC -> U208MF.SPC
[Status 11:23:46 INFO] data for U208 transferred to science data processing
[Tidy 11:23:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:23:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:23:46 INFO] resetting WatchDogTimer
[Status 11:23:47 INFO] Starting Set [AERI set: name V208, 6 scans, 0 angle, D16300 command]
[Ingest 11:23:47 INFO] Sending XML status message
[Status 11:23:47 INFO] Mirror angle: 0
[Mirror 11:23:47 INFO] rotating to position V
[Status 11:23:47 INFO] .SET file for ACQ96 ready
[Ingest 11:23:47 INFO] Starting acquisition
[Status 11:23:48 INFO] reading housekeeping
[Status 11:24:06 INFO] acquire complete
[Status 11:24:06 INFO] writing housekeeping
[Sequencer 11:24:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:24:06 INFO] incremented V scene to 208 completed views
[Sequencer 11:24:06 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:24:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:24:06 INFO] incremented to [AERI set: name W208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:24:06 INFO] V208.SIG(18)
[sigmove 11:24:06 DEBUG] transformed V208Ma.SPC -> V208MA.SPC
[sigmove 11:24:06 DEBUG] transformed V208Mb.SPC -> V208MB.SPC
[sigmove 11:24:06 DEBUG] transformed V208Mc.SPC -> V208MC.SPC
[sigmove 11:24:06 DEBUG] transformed V208Md.SPC -> V208MD.SPC
[sigmove 11:24:06 DEBUG] transformed V208Me.SPC -> V208ME.SPC
[sigmove 11:24:06 DEBUG] transformed V208Mf.SPC -> V208MF.SPC
[Status 11:24:06 INFO] data for V208 transferred to science data processing
[Tidy 11:24:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:24:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:24:06 INFO] resetting WatchDogTimer
[Status 11:24:07 INFO] Starting Set [AERI set: name W208, 6 scans, 0 angle, D16300 command]
[Ingest 11:24:07 INFO] Sending XML status message
[Status 11:24:07 INFO] Mirror angle: 0
[Mirror 11:24:07 INFO] rotating to position W
[Status 11:24:07 INFO] .SET file for ACQ96 ready
[Ingest 11:24:08 INFO] Starting acquisition
[Status 11:24:08 INFO] reading housekeeping
[Status 11:24:26 INFO] acquire complete
[Status 11:24:27 INFO] writing housekeeping
[Sequencer 11:24:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:24:27 INFO] incremented W scene to 208 completed views
[Sequencer 11:24:27 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:24:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:24:27 INFO] incremented to [AERI set: name X208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:24:27 INFO] W208.SIG(18)
[sigmove 11:24:27 DEBUG] transformed W208Ma.SPC -> W208MA.SPC
[sigmove 11:24:27 DEBUG] transformed W208Mb.SPC -> W208MB.SPC
[sigmove 11:24:27 DEBUG] transformed W208Mc.SPC -> W208MC.SPC
[sigmove 11:24:27 DEBUG] transformed W208Md.SPC -> W208MD.SPC
[sigmove 11:24:27 DEBUG] transformed W208Me.SPC -> W208ME.SPC
[sigmove 11:24:27 DEBUG] transformed W208Mf.SPC -> W208MF.SPC
[Status 11:24:27 INFO] data for W208 transferred to science data processing
[Tidy 11:24:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:24:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:24:27 INFO] resetting WatchDogTimer
[Status 11:24:27 INFO] Starting Set [AERI set: name X208, 6 scans, 0 angle, D16300 command]
[Ingest 11:24:27 INFO] Sending XML status message
[Status 11:24:27 INFO] Mirror angle: 0
[Mirror 11:24:27 INFO] rotating to position X
[Status 11:24:28 INFO] .SET file for ACQ96 ready
[Ingest 11:24:28 INFO] Starting acquisition
[Status 11:24:28 INFO] reading housekeeping
[Status 11:24:46 INFO] acquire complete
[Status 11:24:47 INFO] writing housekeeping
[Sequencer 11:24:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:24:47 INFO] incremented X scene to 208 completed views
[Sequencer 11:24:47 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:24:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:24:47 INFO] incremented to [AERI set: name Y208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:24:47 INFO] X208.SIG(18)
[sigmove 11:24:47 DEBUG] transformed X208Ma.SPC -> X208MA.SPC
[sigmove 11:24:47 DEBUG] transformed X208Mb.SPC -> X208MB.SPC
[sigmove 11:24:47 DEBUG] transformed X208Mc.SPC -> X208MC.SPC
[sigmove 11:24:47 DEBUG] transformed X208Md.SPC -> X208MD.SPC
[sigmove 11:24:47 DEBUG] transformed X208Me.SPC -> X208ME.SPC
[sigmove 11:24:47 DEBUG] transformed X208Mf.SPC -> X208MF.SPC
[Status 11:24:47 INFO] data for X208 transferred to science data processing
[Tidy 11:24:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:24:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:24:47 INFO] resetting WatchDogTimer
[Status 11:24:47 INFO] Starting Set [AERI set: name Y208, 6 scans, 0 angle, D16300 command]
[Ingest 11:24:47 INFO] Sending XML status message
[Status 11:24:47 INFO] Mirror angle: 0
[Mirror 11:24:47 INFO] rotating to position Y
[Status 11:24:48 INFO] .SET file for ACQ96 ready
[Ingest 11:24:48 INFO] Starting acquisition
[Status 11:24:48 INFO] reading housekeeping
[Status 11:25:06 INFO] acquire complete
[Status 11:25:07 INFO] writing housekeeping
[Sequencer 11:25:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:25:07 INFO] incremented Y scene to 208 completed views
[Sequencer 11:25:07 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:25:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:25:07 INFO] incremented to [AERI set: name Z208, 6 scans, 0 angle, D16300 command] set
[sigmove 11:25:07 INFO] Y208.SIG(18)
[sigmove 11:25:07 DEBUG] transformed Y208Ma.SPC -> Y208MA.SPC
[sigmove 11:25:07 DEBUG] transformed Y208Mb.SPC -> Y208MB.SPC
[sigmove 11:25:07 DEBUG] transformed Y208Mc.SPC -> Y208MC.SPC
[sigmove 11:25:07 DEBUG] transformed Y208Md.SPC -> Y208MD.SPC
[sigmove 11:25:07 DEBUG] transformed Y208Me.SPC -> Y208ME.SPC
[sigmove 11:25:07 DEBUG] transformed Y208Mf.SPC -> Y208MF.SPC
[Status 11:25:07 INFO] data for Y208 transferred to science data processing
[Tidy 11:25:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:25:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:25:07 INFO] resetting WatchDogTimer
[Status 11:25:07 INFO] Starting Set [AERI set: name Z208, 6 scans, 0 angle, D16300 command]
[Ingest 11:25:07 INFO] Sending XML status message
[Status 11:25:07 INFO] Mirror angle: 0
[Mirror 11:25:08 INFO] rotating to position Z
[Status 11:25:08 INFO] .SET file for ACQ96 ready
[Ingest 11:25:08 INFO] Starting acquisition
[Status 11:25:08 INFO] reading housekeeping
[Status 11:25:26 INFO] acquire complete
[Status 11:25:27 INFO] writing housekeeping
[Sequencer 11:25:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:25:27 INFO] incremented Z scene to 208 completed views
[Sequencer 11:25:27 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:25:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:25:27 INFO] incremented to [AERI set: name H209, 6 scans, 60 angle, D22500 command] set
[sigmove 11:25:27 INFO] Z208.SIG(18)
[sigmove 11:25:27 DEBUG] transformed Z208Ma.SPC -> Z208MA.SPC
[sigmove 11:25:27 DEBUG] transformed Z208Mb.SPC -> Z208MB.SPC
[sigmove 11:25:27 DEBUG] transformed Z208Mc.SPC -> Z208MC.SPC
[sigmove 11:25:27 DEBUG] transformed Z208Md.SPC -> Z208MD.SPC
[sigmove 11:25:27 DEBUG] transformed Z208Me.SPC -> Z208ME.SPC
[sigmove 11:25:27 DEBUG] transformed Z208Mf.SPC -> Z208MF.SPC
[Status 11:25:27 INFO] data for Z208 transferred to science data processing
[Tidy 11:25:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:25:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:25:27 INFO] resetting WatchDogTimer
[Status 11:25:27 INFO] Starting Set [AERI set: name H209, 6 scans, 60 angle, D22500 command]
[Ingest 11:25:27 INFO] Sending XML status message
[Status 11:25:27 INFO] Mirror angle: 60
[Mirror 11:25:28 INFO] rotating to position H
[Status 11:25:29 INFO] .SET file for ACQ96 ready
[Ingest 11:25:29 INFO] Starting acquisition
[Status 11:25:29 INFO] reading housekeeping
[Status 11:25:47 INFO] acquire complete
[Status 11:25:47 INFO] writing housekeeping
[Sequencer 11:25:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:25:47 INFO] incremented H scene to 209 completed views
[Sequencer 11:25:47 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:25:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:25:47 INFO] incremented to [AERI set: name A209, 6 scans, 120 angle, D28300 command] set
[sigmove 11:25:47 INFO] H209.SIG(18)
[sigmove 11:25:47 DEBUG] transformed H209Ma.SPC -> H209MA.SPC
[sigmove 11:25:47 DEBUG] transformed H209Mb.SPC -> H209MB.SPC
[sigmove 11:25:47 DEBUG] transformed H209Mc.SPC -> H209MC.SPC
[sigmove 11:25:47 DEBUG] transformed H209Md.SPC -> H209MD.SPC
[sigmove 11:25:47 DEBUG] transformed H209Me.SPC -> H209ME.SPC
[sigmove 11:25:47 DEBUG] transformed H209Mf.SPC -> H209MF.SPC
[Status 11:25:47 INFO] data for H209 transferred to science data processing
[Tidy 11:25:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:25:47 INFO] A207.FIN(19),H207.FIN(19),S207.FIN(19),T207.FIN(19),U207.FIN(19),V207.FIN(19),W207.FIN(19),X207.FIN(19),Y207.FIN(19),Z207.FIN(19),A208.FIN(19),H208.FIN(19),S208.FIN(19),T208.FIN(19),U208.FIN(19),V208.FIN(19),W208.FIN(19),X208.FIN(19),Y208.FIN(19),Z208.FIN(19)
[sigmove 11:25:47 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:25:47 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:25:51 DEBUG] done zipping
[WatchDog 11:25:51 INFO] resetting WatchDogTimer
[Status 11:25:52 INFO] Starting Set [AERI set: name A209, 6 scans, 120 angle, D28300 command]
[Ingest 11:25:52 INFO] Sending XML status message
[Status 11:25:52 INFO] Mirror angle: 120
[Mirror 11:25:52 INFO] rotating to position A
[Status 11:25:53 INFO] .SET file for ACQ96 ready
[Ingest 11:25:53 INFO] Starting acquisition
[Status 11:25:53 INFO] reading housekeeping
[Status 11:26:11 INFO] acquire complete
[Status 11:26:12 INFO] writing housekeeping
[Sequencer 11:26:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:26:12 INFO] incremented A scene to 209 completed views
[Sequencer 11:26:12 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:26:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:26:12 INFO] incremented to [AERI set: name S209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:26:12 INFO] A209.SIG(18)
[sigmove 11:26:12 DEBUG] transformed A209Ma.SPC -> A209MA.SPC
[sigmove 11:26:12 DEBUG] transformed A209Mb.SPC -> A209MB.SPC
[sigmove 11:26:12 DEBUG] transformed A209Mc.SPC -> A209MC.SPC
[sigmove 11:26:12 DEBUG] transformed A209Md.SPC -> A209MD.SPC
[sigmove 11:26:12 DEBUG] transformed A209Me.SPC -> A209ME.SPC
[sigmove 11:26:12 DEBUG] transformed A209Mf.SPC -> A209MF.SPC
[Status 11:26:12 INFO] data for A209 transferred to science data processing
[Tidy 11:26:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:26:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:26:12 INFO] resetting WatchDogTimer
[Status 11:26:12 INFO] Starting Set [AERI set: name S209, 6 scans, 0 angle, D16300 command]
[Ingest 11:26:12 INFO] Sending XML status message
[Status 11:26:12 INFO] Mirror angle: 0
[Mirror 11:26:13 INFO] rotating to position S
[Status 11:26:14 INFO] .SET file for ACQ96 ready
[Ingest 11:26:14 INFO] Starting acquisition
[Status 11:26:15 INFO] reading housekeeping
[Status 11:26:33 INFO] acquire complete
[Status 11:26:33 INFO] writing housekeeping
[Sequencer 11:26:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:26:33 INFO] incremented S scene to 209 completed views
[Sequencer 11:26:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:26:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:26:33 INFO] incremented to [AERI set: name T209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:26:33 INFO] S209.SIG(18)
[sigmove 11:26:33 DEBUG] transformed S209Ma.SPC -> S209MA.SPC
[sigmove 11:26:33 DEBUG] transformed S209Mb.SPC -> S209MB.SPC
[sigmove 11:26:33 DEBUG] transformed S209Mc.SPC -> S209MC.SPC
[sigmove 11:26:33 DEBUG] transformed S209Md.SPC -> S209MD.SPC
[sigmove 11:26:33 DEBUG] transformed S209Me.SPC -> S209ME.SPC
[sigmove 11:26:33 DEBUG] transformed S209Mf.SPC -> S209MF.SPC
[Status 11:26:33 INFO] data for S209 transferred to science data processing
[Tidy 11:26:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:26:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:26:33 INFO] resetting WatchDogTimer
[Status 11:26:34 INFO] Starting Set [AERI set: name T209, 6 scans, 0 angle, D16300 command]
[Ingest 11:26:34 INFO] Sending XML status message
[Status 11:26:34 INFO] Mirror angle: 0
[Mirror 11:26:34 INFO] rotating to position T
[Status 11:26:34 INFO] .SET file for ACQ96 ready
[Ingest 11:26:35 INFO] Starting acquisition
[Status 11:26:35 INFO] reading housekeeping
[Status 11:26:53 INFO] acquire complete
[Status 11:26:54 INFO] writing housekeeping
[Sequencer 11:26:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:26:54 INFO] incremented T scene to 209 completed views
[Sequencer 11:26:54 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:26:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:26:54 INFO] incremented to [AERI set: name U209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:26:54 INFO] T209.SIG(18)
[sigmove 11:26:54 DEBUG] transformed T209Ma.SPC -> T209MA.SPC
[sigmove 11:26:54 DEBUG] transformed T209Mb.SPC -> T209MB.SPC
[sigmove 11:26:54 DEBUG] transformed T209Mc.SPC -> T209MC.SPC
[sigmove 11:26:54 DEBUG] transformed T209Md.SPC -> T209MD.SPC
[sigmove 11:26:54 DEBUG] transformed T209Me.SPC -> T209ME.SPC
[sigmove 11:26:54 DEBUG] transformed T209Mf.SPC -> T209MF.SPC
[Status 11:26:54 INFO] data for T209 transferred to science data processing
[Tidy 11:26:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:26:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:26:54 INFO] resetting WatchDogTimer
[Status 11:26:54 INFO] Starting Set [AERI set: name U209, 6 scans, 0 angle, D16300 command]
[Ingest 11:26:54 INFO] Sending XML status message
[Status 11:26:54 INFO] Mirror angle: 0
[Mirror 11:26:54 INFO] rotating to position U
[Status 11:26:55 INFO] .SET file for ACQ96 ready
[Ingest 11:26:55 INFO] Starting acquisition
[Status 11:26:55 INFO] reading housekeeping
[Status 11:27:13 INFO] acquire complete
[Status 11:27:14 INFO] writing housekeeping
[Sequencer 11:27:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:27:14 INFO] incremented U scene to 209 completed views
[Sequencer 11:27:14 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:27:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:27:14 INFO] incremented to [AERI set: name V209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:27:14 INFO] U209.SIG(18)
[sigmove 11:27:14 DEBUG] transformed U209Ma.SPC -> U209MA.SPC
[sigmove 11:27:14 DEBUG] transformed U209Mb.SPC -> U209MB.SPC
[sigmove 11:27:14 DEBUG] transformed U209Mc.SPC -> U209MC.SPC
[sigmove 11:27:14 DEBUG] transformed U209Md.SPC -> U209MD.SPC
[sigmove 11:27:14 DEBUG] transformed U209Me.SPC -> U209ME.SPC
[sigmove 11:27:14 DEBUG] transformed U209Mf.SPC -> U209MF.SPC
[Status 11:27:14 INFO] data for U209 transferred to science data processing
[Tidy 11:27:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:27:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:27:14 INFO] resetting WatchDogTimer
[Status 11:27:14 INFO] Starting Set [AERI set: name V209, 6 scans, 0 angle, D16300 command]
[Ingest 11:27:14 INFO] Sending XML status message
[Status 11:27:14 INFO] Mirror angle: 0
[Mirror 11:27:14 INFO] rotating to position V
[Status 11:27:15 INFO] .SET file for ACQ96 ready
[Ingest 11:27:15 INFO] Starting acquisition
[Status 11:27:15 INFO] reading housekeeping
[Status 11:27:33 INFO] acquire complete
[Status 11:27:34 INFO] writing housekeeping
[Sequencer 11:27:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:27:34 INFO] incremented V scene to 209 completed views
[Sequencer 11:27:34 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:27:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:27:34 INFO] incremented to [AERI set: name W209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:27:34 INFO] V209.SIG(18)
[sigmove 11:27:34 DEBUG] transformed V209Ma.SPC -> V209MA.SPC
[sigmove 11:27:34 DEBUG] transformed V209Mb.SPC -> V209MB.SPC
[sigmove 11:27:34 DEBUG] transformed V209Mc.SPC -> V209MC.SPC
[sigmove 11:27:34 DEBUG] transformed V209Md.SPC -> V209MD.SPC
[sigmove 11:27:34 DEBUG] transformed V209Me.SPC -> V209ME.SPC
[sigmove 11:27:34 DEBUG] transformed V209Mf.SPC -> V209MF.SPC
[Status 11:27:34 INFO] data for V209 transferred to science data processing
[Tidy 11:27:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:27:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:27:34 INFO] resetting WatchDogTimer
[Status 11:27:34 INFO] Starting Set [AERI set: name W209, 6 scans, 0 angle, D16300 command]
[Ingest 11:27:34 INFO] Sending XML status message
[Status 11:27:34 INFO] Mirror angle: 0
[Mirror 11:27:35 INFO] rotating to position W
[Status 11:27:35 INFO] .SET file for ACQ96 ready
[Ingest 11:27:35 INFO] Starting acquisition
[Status 11:27:35 INFO] reading housekeeping
[Status 11:27:53 INFO] acquire complete
[Status 11:27:54 INFO] writing housekeeping
[Sequencer 11:27:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:27:54 INFO] incremented W scene to 209 completed views
[Sequencer 11:27:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:27:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:27:54 INFO] incremented to [AERI set: name X209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:27:54 INFO] W209.SIG(18)
[sigmove 11:27:54 DEBUG] transformed W209Ma.SPC -> W209MA.SPC
[sigmove 11:27:54 DEBUG] transformed W209Mb.SPC -> W209MB.SPC
[sigmove 11:27:54 DEBUG] transformed W209Mc.SPC -> W209MC.SPC
[sigmove 11:27:54 DEBUG] transformed W209Md.SPC -> W209MD.SPC
[sigmove 11:27:54 DEBUG] transformed W209Me.SPC -> W209ME.SPC
[sigmove 11:27:54 DEBUG] transformed W209Mf.SPC -> W209MF.SPC
[Status 11:27:54 INFO] data for W209 transferred to science data processing
[Tidy 11:27:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:27:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:27:54 INFO] resetting WatchDogTimer
[Status 11:27:54 INFO] Starting Set [AERI set: name X209, 6 scans, 0 angle, D16300 command]
[Ingest 11:27:54 INFO] Sending XML status message
[Status 11:27:55 INFO] Mirror angle: 0
[Mirror 11:27:55 INFO] rotating to position X
[Status 11:27:55 INFO] .SET file for ACQ96 ready
[Ingest 11:27:55 INFO] Starting acquisition
[Status 11:27:56 INFO] reading housekeeping
[Status 11:28:14 INFO] acquire complete
[Status 11:28:14 INFO] writing housekeeping
[Sequencer 11:28:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:28:14 INFO] incremented X scene to 209 completed views
[Sequencer 11:28:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:28:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:28:14 INFO] incremented to [AERI set: name Y209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:28:14 INFO] X209.SIG(18)
[sigmove 11:28:14 DEBUG] transformed X209Ma.SPC -> X209MA.SPC
[sigmove 11:28:14 DEBUG] transformed X209Mb.SPC -> X209MB.SPC
[sigmove 11:28:14 DEBUG] transformed X209Mc.SPC -> X209MC.SPC
[sigmove 11:28:14 DEBUG] transformed X209Md.SPC -> X209MD.SPC
[sigmove 11:28:14 DEBUG] transformed X209Me.SPC -> X209ME.SPC
[sigmove 11:28:14 DEBUG] transformed X209Mf.SPC -> X209MF.SPC
[Status 11:28:14 INFO] data for X209 transferred to science data processing
[Tidy 11:28:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:28:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:28:14 INFO] resetting WatchDogTimer
[Status 11:28:15 INFO] Starting Set [AERI set: name Y209, 6 scans, 0 angle, D16300 command]
[Ingest 11:28:15 INFO] Sending XML status message
[Status 11:28:15 INFO] Mirror angle: 0
[Mirror 11:28:15 INFO] rotating to position Y
[Status 11:28:15 INFO] .SET file for ACQ96 ready
[Ingest 11:28:16 INFO] Starting acquisition
[Status 11:28:16 INFO] reading housekeeping
[Status 11:28:34 INFO] acquire complete
[Status 11:28:35 INFO] writing housekeeping
[Sequencer 11:28:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:28:35 INFO] incremented Y scene to 209 completed views
[Sequencer 11:28:35 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:28:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:28:35 INFO] incremented to [AERI set: name Z209, 6 scans, 0 angle, D16300 command] set
[sigmove 11:28:35 INFO] Y209.SIG(18)
[sigmove 11:28:35 DEBUG] transformed Y209Ma.SPC -> Y209MA.SPC
[sigmove 11:28:35 DEBUG] transformed Y209Mb.SPC -> Y209MB.SPC
[sigmove 11:28:35 DEBUG] transformed Y209Mc.SPC -> Y209MC.SPC
[sigmove 11:28:35 DEBUG] transformed Y209Md.SPC -> Y209MD.SPC
[sigmove 11:28:35 DEBUG] transformed Y209Me.SPC -> Y209ME.SPC
[sigmove 11:28:35 DEBUG] transformed Y209Mf.SPC -> Y209MF.SPC
[Status 11:28:35 INFO] data for Y209 transferred to science data processing
[Tidy 11:28:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:28:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:28:35 INFO] resetting WatchDogTimer
[Status 11:28:35 INFO] Starting Set [AERI set: name Z209, 6 scans, 0 angle, D16300 command]
[Ingest 11:28:35 INFO] Sending XML status message
[Status 11:28:35 INFO] Mirror angle: 0
[Mirror 11:28:35 INFO] rotating to position Z
[Status 11:28:36 INFO] .SET file for ACQ96 ready
[Ingest 11:28:36 INFO] Starting acquisition
[Status 11:28:36 INFO] reading housekeeping
[Status 11:28:54 INFO] acquire complete
[Status 11:28:55 INFO] writing housekeeping
[Sequencer 11:28:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:28:55 INFO] incremented Z scene to 209 completed views
[Sequencer 11:28:55 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:28:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:28:55 INFO] incremented to [AERI set: name A210, 6 scans, 120 angle, D28300 command] set
[sigmove 11:28:55 INFO] Z209.SIG(18)
[sigmove 11:28:55 DEBUG] transformed Z209Ma.SPC -> Z209MA.SPC
[sigmove 11:28:55 DEBUG] transformed Z209Mb.SPC -> Z209MB.SPC
[sigmove 11:28:55 DEBUG] transformed Z209Mc.SPC -> Z209MC.SPC
[sigmove 11:28:55 DEBUG] transformed Z209Md.SPC -> Z209MD.SPC
[sigmove 11:28:55 DEBUG] transformed Z209Me.SPC -> Z209ME.SPC
[sigmove 11:28:55 DEBUG] transformed Z209Mf.SPC -> Z209MF.SPC
[Status 11:28:55 INFO] data for Z209 transferred to science data processing
[Tidy 11:28:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:28:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:28:55 INFO] resetting WatchDogTimer
[Status 11:28:55 INFO] Starting Set [AERI set: name A210, 6 scans, 120 angle, D28300 command]
[Ingest 11:28:55 INFO] Sending XML status message
[Status 11:28:55 INFO] Mirror angle: 120
[Mirror 11:28:55 INFO] rotating to position A
[Status 11:28:57 INFO] .SET file for ACQ96 ready
[Ingest 11:28:57 INFO] Starting acquisition
[Status 11:28:57 INFO] reading housekeeping
[Status 11:29:15 INFO] acquire complete
[Status 11:29:16 INFO] writing housekeeping
[Sequencer 11:29:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:29:16 INFO] incremented A scene to 210 completed views
[Sequencer 11:29:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:29:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:29:16 INFO] incremented to [AERI set: name H210, 6 scans, 60 angle, D22500 command] set
[sigmove 11:29:16 INFO] A210.SIG(18)
[sigmove 11:29:16 DEBUG] transformed A210Ma.SPC -> A210MA.SPC
[sigmove 11:29:16 DEBUG] transformed A210Mb.SPC -> A210MB.SPC
[sigmove 11:29:16 DEBUG] transformed A210Mc.SPC -> A210MC.SPC
[sigmove 11:29:16 DEBUG] transformed A210Md.SPC -> A210MD.SPC
[sigmove 11:29:16 DEBUG] transformed A210Me.SPC -> A210ME.SPC
[sigmove 11:29:16 DEBUG] transformed A210Mf.SPC -> A210MF.SPC
[Status 11:29:16 INFO] data for A210 transferred to science data processing
[Tidy 11:29:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:29:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:29:16 INFO] resetting WatchDogTimer
[Status 11:29:16 INFO] Starting Set [AERI set: name H210, 6 scans, 60 angle, D22500 command]
[Ingest 11:29:16 INFO] Sending XML status message
[Status 11:29:16 INFO] Mirror angle: 60
[Mirror 11:29:17 INFO] rotating to position H
[Status 11:29:18 INFO] .SET file for ACQ96 ready
[Ingest 11:29:18 INFO] Starting acquisition
[Status 11:29:18 INFO] reading housekeeping
[Status 11:29:35 INFO] acquire complete
[Status 11:29:36 INFO] writing housekeeping
[Sequencer 11:29:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:29:36 INFO] incremented H scene to 210 completed views
[Sequencer 11:29:36 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:29:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:29:36 INFO] incremented to [AERI set: name S210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:29:36 INFO] H210.SIG(18)
[sigmove 11:29:36 DEBUG] transformed H210Ma.SPC -> H210MA.SPC
[sigmove 11:29:36 DEBUG] transformed H210Mb.SPC -> H210MB.SPC
[sigmove 11:29:36 DEBUG] transformed H210Mc.SPC -> H210MC.SPC
[sigmove 11:29:36 DEBUG] transformed H210Md.SPC -> H210MD.SPC
[sigmove 11:29:36 DEBUG] transformed H210Me.SPC -> H210ME.SPC
[sigmove 11:29:36 DEBUG] transformed H210Mf.SPC -> H210MF.SPC
[Status 11:29:36 INFO] data for H210 transferred to science data processing
[Tidy 11:29:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:29:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:29:36 INFO] resetting WatchDogTimer
[Status 11:29:37 INFO] Starting Set [AERI set: name S210, 6 scans, 0 angle, D16300 command]
[Ingest 11:29:37 INFO] Sending XML status message
[Status 11:29:37 INFO] Mirror angle: 0
[Mirror 11:29:37 INFO] rotating to position S
[Status 11:29:38 INFO] .SET file for ACQ96 ready
[Ingest 11:29:38 INFO] Starting acquisition
[Status 11:29:38 INFO] reading housekeeping
[Status 11:29:56 INFO] acquire complete
[Status 11:29:56 INFO] writing housekeeping
[Sequencer 11:29:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:29:56 INFO] incremented S scene to 210 completed views
[Sequencer 11:29:56 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:29:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:29:56 INFO] incremented to [AERI set: name T210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:29:56 INFO] S210.SIG(18)
[sigmove 11:29:56 DEBUG] transformed S210Ma.SPC -> S210MA.SPC
[sigmove 11:29:56 DEBUG] transformed S210Mb.SPC -> S210MB.SPC
[sigmove 11:29:56 DEBUG] transformed S210Mc.SPC -> S210MC.SPC
[sigmove 11:29:56 DEBUG] transformed S210Md.SPC -> S210MD.SPC
[sigmove 11:29:56 DEBUG] transformed S210Me.SPC -> S210ME.SPC
[sigmove 11:29:56 DEBUG] transformed S210Mf.SPC -> S210MF.SPC
[Status 11:29:56 INFO] data for S210 transferred to science data processing
[Tidy 11:29:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:29:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:29:56 INFO] resetting WatchDogTimer
[Status 11:29:57 INFO] Starting Set [AERI set: name T210, 6 scans, 0 angle, D16300 command]
[Ingest 11:29:57 INFO] Sending XML status message
[Status 11:29:57 INFO] Mirror angle: 0
[Mirror 11:29:57 INFO] rotating to position T
[Status 11:29:57 INFO] .SET file for ACQ96 ready
[Ingest 11:29:58 INFO] Starting acquisition
[Status 11:29:58 INFO] reading housekeeping
[Status 11:30:16 INFO] acquire complete
[Status 11:30:17 INFO] writing housekeeping
[Sequencer 11:30:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:30:17 INFO] incremented T scene to 210 completed views
[Sequencer 11:30:17 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:30:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:30:17 INFO] incremented to [AERI set: name U210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:30:17 INFO] T210.SIG(18)
[sigmove 11:30:17 DEBUG] transformed T210Ma.SPC -> T210MA.SPC
[sigmove 11:30:17 DEBUG] transformed T210Mb.SPC -> T210MB.SPC
[sigmove 11:30:17 DEBUG] transformed T210Mc.SPC -> T210MC.SPC
[sigmove 11:30:17 DEBUG] transformed T210Md.SPC -> T210MD.SPC
[sigmove 11:30:17 DEBUG] transformed T210Me.SPC -> T210ME.SPC
[sigmove 11:30:17 DEBUG] transformed T210Mf.SPC -> T210MF.SPC
[Status 11:30:17 INFO] data for T210 transferred to science data processing
[Tidy 11:30:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:30:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:30:17 INFO] resetting WatchDogTimer
[Status 11:30:17 INFO] Starting Set [AERI set: name U210, 6 scans, 0 angle, D16300 command]
[Ingest 11:30:17 INFO] Sending XML status message
[Status 11:30:17 INFO] Mirror angle: 0
[Mirror 11:30:17 INFO] rotating to position U
[Status 11:30:18 INFO] .SET file for ACQ96 ready
[Ingest 11:30:18 INFO] Starting acquisition
[Status 11:30:18 INFO] reading housekeeping
[Status 11:30:36 INFO] acquire complete
[Status 11:30:37 INFO] writing housekeeping
[Sequencer 11:30:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:30:37 INFO] incremented U scene to 210 completed views
[Sequencer 11:30:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:30:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:30:37 INFO] incremented to [AERI set: name V210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:30:37 INFO] U210.SIG(18)
[sigmove 11:30:37 DEBUG] transformed U210Ma.SPC -> U210MA.SPC
[sigmove 11:30:37 DEBUG] transformed U210Mb.SPC -> U210MB.SPC
[sigmove 11:30:37 DEBUG] transformed U210Mc.SPC -> U210MC.SPC
[sigmove 11:30:37 DEBUG] transformed U210Md.SPC -> U210MD.SPC
[sigmove 11:30:37 DEBUG] transformed U210Me.SPC -> U210ME.SPC
[sigmove 11:30:37 DEBUG] transformed U210Mf.SPC -> U210MF.SPC
[Status 11:30:37 INFO] data for U210 transferred to science data processing
[Tidy 11:30:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:30:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:30:37 INFO] resetting WatchDogTimer
[Status 11:30:37 INFO] Starting Set [AERI set: name V210, 6 scans, 0 angle, D16300 command]
[Ingest 11:30:37 INFO] Sending XML status message
[Status 11:30:37 INFO] Mirror angle: 0
[Mirror 11:30:37 INFO] rotating to position V
[Status 11:30:38 INFO] .SET file for ACQ96 ready
[Ingest 11:30:38 INFO] Starting acquisition
[Status 11:30:38 INFO] reading housekeeping
[Status 11:30:56 INFO] acquire complete
[Status 11:30:57 INFO] writing housekeeping
[Sequencer 11:30:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:30:57 INFO] incremented V scene to 210 completed views
[Sequencer 11:30:57 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:30:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:30:57 INFO] incremented to [AERI set: name W210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:30:57 INFO] V210.SIG(18)
[sigmove 11:30:57 DEBUG] transformed V210Ma.SPC -> V210MA.SPC
[sigmove 11:30:57 DEBUG] transformed V210Mb.SPC -> V210MB.SPC
[sigmove 11:30:57 DEBUG] transformed V210Mc.SPC -> V210MC.SPC
[sigmove 11:30:57 DEBUG] transformed V210Md.SPC -> V210MD.SPC
[sigmove 11:30:57 DEBUG] transformed V210Me.SPC -> V210ME.SPC
[sigmove 11:30:57 DEBUG] transformed V210Mf.SPC -> V210MF.SPC
[Status 11:30:57 INFO] data for V210 transferred to science data processing
[Tidy 11:30:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:30:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:30:57 INFO] resetting WatchDogTimer
[Status 11:30:57 INFO] Starting Set [AERI set: name W210, 6 scans, 0 angle, D16300 command]
[Ingest 11:30:57 INFO] Sending XML status message
[Status 11:30:57 INFO] Mirror angle: 0
[Mirror 11:30:58 INFO] rotating to position W
[Status 11:30:58 INFO] .SET file for ACQ96 ready
[Ingest 11:30:58 INFO] Starting acquisition
[Status 11:30:59 INFO] reading housekeeping
[Status 11:31:16 INFO] acquire complete
[Status 11:31:17 INFO] writing housekeeping
[Sequencer 11:31:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:31:17 INFO] incremented W scene to 210 completed views
[Sequencer 11:31:17 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:31:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:31:17 INFO] incremented to [AERI set: name X210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:31:17 INFO] W210.SIG(18)
[sigmove 11:31:17 DEBUG] transformed W210Ma.SPC -> W210MA.SPC
[sigmove 11:31:17 DEBUG] transformed W210Mb.SPC -> W210MB.SPC
[sigmove 11:31:17 DEBUG] transformed W210Mc.SPC -> W210MC.SPC
[sigmove 11:31:17 DEBUG] transformed W210Md.SPC -> W210MD.SPC
[sigmove 11:31:17 DEBUG] transformed W210Me.SPC -> W210ME.SPC
[sigmove 11:31:17 DEBUG] transformed W210Mf.SPC -> W210MF.SPC
[Status 11:31:17 INFO] data for W210 transferred to science data processing
[Tidy 11:31:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:31:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:31:17 INFO] resetting WatchDogTimer
[Status 11:31:18 INFO] Starting Set [AERI set: name X210, 6 scans, 0 angle, D16300 command]
[Ingest 11:31:18 INFO] Sending XML status message
[Status 11:31:18 INFO] Mirror angle: 0
[Mirror 11:31:18 INFO] rotating to position X
[Status 11:31:18 INFO] .SET file for ACQ96 ready
[Ingest 11:31:18 INFO] Starting acquisition
[Status 11:31:19 INFO] reading housekeeping
[Status 11:31:37 INFO] acquire complete
[Status 11:31:37 INFO] writing housekeeping
[Sequencer 11:31:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:31:37 INFO] incremented X scene to 210 completed views
[Sequencer 11:31:37 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:31:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:31:37 INFO] incremented to [AERI set: name Y210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:31:37 INFO] X210.SIG(18)
[sigmove 11:31:37 DEBUG] transformed X210Ma.SPC -> X210MA.SPC
[sigmove 11:31:37 DEBUG] transformed X210Mb.SPC -> X210MB.SPC
[sigmove 11:31:37 DEBUG] transformed X210Mc.SPC -> X210MC.SPC
[sigmove 11:31:37 DEBUG] transformed X210Md.SPC -> X210MD.SPC
[sigmove 11:31:37 DEBUG] transformed X210Me.SPC -> X210ME.SPC
[sigmove 11:31:37 DEBUG] transformed X210Mf.SPC -> X210MF.SPC
[Status 11:31:37 INFO] data for X210 transferred to science data processing
[Tidy 11:31:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:31:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:31:37 INFO] resetting WatchDogTimer
[Status 11:31:38 INFO] Starting Set [AERI set: name Y210, 6 scans, 0 angle, D16300 command]
[Ingest 11:31:38 INFO] Sending XML status message
[Status 11:31:38 INFO] Mirror angle: 0
[Mirror 11:31:38 INFO] rotating to position Y
[Status 11:31:38 INFO] .SET file for ACQ96 ready
[Ingest 11:31:39 INFO] Starting acquisition
[Status 11:31:39 INFO] reading housekeeping
[Status 11:31:57 INFO] acquire complete
[Status 11:31:58 INFO] writing housekeeping
[Sequencer 11:31:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:31:58 INFO] incremented Y scene to 210 completed views
[Sequencer 11:31:58 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:31:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:31:58 INFO] incremented to [AERI set: name Z210, 6 scans, 0 angle, D16300 command] set
[sigmove 11:31:58 INFO] Y210.SIG(18)
[sigmove 11:31:58 DEBUG] transformed Y210Ma.SPC -> Y210MA.SPC
[sigmove 11:31:58 DEBUG] transformed Y210Mb.SPC -> Y210MB.SPC
[sigmove 11:31:58 DEBUG] transformed Y210Mc.SPC -> Y210MC.SPC
[sigmove 11:31:58 DEBUG] transformed Y210Md.SPC -> Y210MD.SPC
[sigmove 11:31:58 DEBUG] transformed Y210Me.SPC -> Y210ME.SPC
[sigmove 11:31:58 DEBUG] transformed Y210Mf.SPC -> Y210MF.SPC
[Status 11:31:58 INFO] data for Y210 transferred to science data processing
[Tidy 11:31:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:31:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:31:58 INFO] resetting WatchDogTimer
[Status 11:31:58 INFO] Starting Set [AERI set: name Z210, 6 scans, 0 angle, D16300 command]
[Ingest 11:31:58 INFO] Sending XML status message
[Status 11:31:58 INFO] Mirror angle: 0
[Mirror 11:31:58 INFO] rotating to position Z
[Status 11:31:59 INFO] .SET file for ACQ96 ready
[Ingest 11:31:59 INFO] Starting acquisition
[Status 11:31:59 INFO] reading housekeeping
[Status 11:32:17 INFO] acquire complete
[Status 11:32:18 INFO] writing housekeeping
[Sequencer 11:32:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:32:18 INFO] incremented Z scene to 210 completed views
[Sequencer 11:32:18 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:32:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:32:18 INFO] incremented to [AERI set: name H211, 6 scans, 60 angle, D22500 command] set
[sigmove 11:32:18 INFO] Z210.SIG(18)
[sigmove 11:32:18 DEBUG] transformed Z210Ma.SPC -> Z210MA.SPC
[sigmove 11:32:18 DEBUG] transformed Z210Mb.SPC -> Z210MB.SPC
[sigmove 11:32:18 DEBUG] transformed Z210Mc.SPC -> Z210MC.SPC
[sigmove 11:32:18 DEBUG] transformed Z210Md.SPC -> Z210MD.SPC
[sigmove 11:32:18 DEBUG] transformed Z210Me.SPC -> Z210ME.SPC
[sigmove 11:32:18 DEBUG] transformed Z210Mf.SPC -> Z210MF.SPC
[Status 11:32:18 INFO] data for Z210 transferred to science data processing
[Tidy 11:32:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:32:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:32:18 INFO] resetting WatchDogTimer
[Status 11:32:18 INFO] Starting Set [AERI set: name H211, 6 scans, 60 angle, D22500 command]
[Ingest 11:32:18 INFO] Sending XML status message
[Status 11:32:18 INFO] Mirror angle: 60
[Mirror 11:32:18 INFO] rotating to position H
[Status 11:32:19 INFO] .SET file for ACQ96 ready
[Ingest 11:32:20 INFO] Starting acquisition
[Status 11:32:20 INFO] reading housekeeping
[Status 11:32:37 INFO] acquire complete
[Status 11:32:38 INFO] writing housekeeping
[Sequencer 11:32:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:32:38 INFO] incremented H scene to 211 completed views
[Sequencer 11:32:38 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:32:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:32:38 INFO] incremented to [AERI set: name A211, 6 scans, 120 angle, D28300 command] set
[sigmove 11:32:38 INFO] H211.SIG(18)
[sigmove 11:32:38 DEBUG] transformed H211Ma.SPC -> H211MA.SPC
[sigmove 11:32:38 DEBUG] transformed H211Mb.SPC -> H211MB.SPC
[sigmove 11:32:38 DEBUG] transformed H211Mc.SPC -> H211MC.SPC
[sigmove 11:32:38 DEBUG] transformed H211Md.SPC -> H211MD.SPC
[sigmove 11:32:38 DEBUG] transformed H211Me.SPC -> H211ME.SPC
[sigmove 11:32:38 DEBUG] transformed H211Mf.SPC -> H211MF.SPC
[Status 11:32:38 INFO] data for H211 transferred to science data processing
[Tidy 11:32:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:32:38 INFO] A209.FIN(19),H209.FIN(19),S209.FIN(19),T209.FIN(19),U209.FIN(19),V209.FIN(19),W209.FIN(19),X209.FIN(19),Y209.FIN(19),Z209.FIN(19),A210.FIN(19),H210.FIN(19),S210.FIN(19),T210.FIN(19),U210.FIN(19),V210.FIN(19),W210.FIN(19),X210.FIN(19),Y210.FIN(19),Z210.FIN(19)
[sigmove 11:32:38 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:32:38 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:32:42 DEBUG] done zipping
[WatchDog 11:32:42 INFO] resetting WatchDogTimer
[Status 11:32:42 INFO] Starting Set [AERI set: name A211, 6 scans, 120 angle, D28300 command]
[Ingest 11:32:42 INFO] Sending XML status message
[Status 11:32:42 INFO] Mirror angle: 120
[Mirror 11:32:43 INFO] rotating to position A
[Status 11:32:44 INFO] .SET file for ACQ96 ready
[Ingest 11:32:44 INFO] Starting acquisition
[Status 11:32:44 INFO] reading housekeeping
[Status 11:33:02 INFO] acquire complete
[Status 11:33:03 INFO] writing housekeeping
[Sequencer 11:33:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:33:03 INFO] incremented A scene to 211 completed views
[Sequencer 11:33:03 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:33:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:33:03 INFO] incremented to [AERI set: name S211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:33:03 INFO] A211.SIG(18)
[sigmove 11:33:03 DEBUG] transformed A211Ma.SPC -> A211MA.SPC
[sigmove 11:33:03 DEBUG] transformed A211Mb.SPC -> A211MB.SPC
[sigmove 11:33:03 DEBUG] transformed A211Mc.SPC -> A211MC.SPC
[sigmove 11:33:03 DEBUG] transformed A211Md.SPC -> A211MD.SPC
[sigmove 11:33:03 DEBUG] transformed A211Me.SPC -> A211ME.SPC
[sigmove 11:33:03 DEBUG] transformed A211Mf.SPC -> A211MF.SPC
[Status 11:33:03 INFO] data for A211 transferred to science data processing
[Tidy 11:33:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:33:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:33:03 INFO] resetting WatchDogTimer
[Status 11:33:03 INFO] Starting Set [AERI set: name S211, 6 scans, 0 angle, D16300 command]
[Ingest 11:33:03 INFO] Sending XML status message
[Status 11:33:03 INFO] Mirror angle: 0
[Mirror 11:33:03 INFO] rotating to position S
[Status 11:33:05 INFO] .SET file for ACQ96 ready
[Ingest 11:33:05 INFO] Starting acquisition
[Status 11:33:05 INFO] reading housekeeping
[Status 11:33:23 INFO] acquire complete
[Status 11:33:24 INFO] writing housekeeping
[Sequencer 11:33:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:33:24 INFO] incremented S scene to 211 completed views
[Sequencer 11:33:24 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:33:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:33:24 INFO] incremented to [AERI set: name T211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:33:24 INFO] S211.SIG(18)
[sigmove 11:33:24 DEBUG] transformed S211Ma.SPC -> S211MA.SPC
[sigmove 11:33:24 DEBUG] transformed S211Mb.SPC -> S211MB.SPC
[sigmove 11:33:24 DEBUG] transformed S211Mc.SPC -> S211MC.SPC
[sigmove 11:33:24 DEBUG] transformed S211Md.SPC -> S211MD.SPC
[sigmove 11:33:24 DEBUG] transformed S211Me.SPC -> S211ME.SPC
[sigmove 11:33:24 DEBUG] transformed S211Mf.SPC -> S211MF.SPC
[Status 11:33:24 INFO] data for S211 transferred to science data processing
[Tidy 11:33:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:33:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:33:24 INFO] resetting WatchDogTimer
[Status 11:33:24 INFO] Starting Set [AERI set: name T211, 6 scans, 0 angle, D16300 command]
[Ingest 11:33:24 INFO] Sending XML status message
[Status 11:33:24 INFO] Mirror angle: 0
[Mirror 11:33:25 INFO] rotating to position T
[Status 11:33:25 INFO] .SET file for ACQ96 ready
[Ingest 11:33:25 INFO] Starting acquisition
[Status 11:33:26 INFO] reading housekeeping
[Status 11:33:43 INFO] acquire complete
[Status 11:33:44 INFO] writing housekeeping
[Sequencer 11:33:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:33:44 INFO] incremented T scene to 211 completed views
[Sequencer 11:33:44 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:33:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:33:44 INFO] incremented to [AERI set: name U211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:33:44 INFO] T211.SIG(18)
[sigmove 11:33:44 DEBUG] transformed T211Ma.SPC -> T211MA.SPC
[sigmove 11:33:44 DEBUG] transformed T211Mb.SPC -> T211MB.SPC
[sigmove 11:33:44 DEBUG] transformed T211Mc.SPC -> T211MC.SPC
[sigmove 11:33:44 DEBUG] transformed T211Md.SPC -> T211MD.SPC
[sigmove 11:33:44 DEBUG] transformed T211Me.SPC -> T211ME.SPC
[sigmove 11:33:44 DEBUG] transformed T211Mf.SPC -> T211MF.SPC
[Status 11:33:44 INFO] data for T211 transferred to science data processing
[Tidy 11:33:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:33:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:33:44 INFO] resetting WatchDogTimer
[Status 11:33:45 INFO] Starting Set [AERI set: name U211, 6 scans, 0 angle, D16300 command]
[Ingest 11:33:45 INFO] Sending XML status message
[Status 11:33:45 INFO] Mirror angle: 0
[Mirror 11:33:45 INFO] rotating to position U
[Status 11:33:45 INFO] .SET file for ACQ96 ready
[Ingest 11:33:45 INFO] Starting acquisition
[Status 11:33:46 INFO] reading housekeeping
[Status 11:34:04 INFO] acquire complete
[Status 11:34:04 INFO] writing housekeeping
[Sequencer 11:34:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:34:04 INFO] incremented U scene to 211 completed views
[Sequencer 11:34:04 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:34:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:34:04 INFO] incremented to [AERI set: name V211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:34:04 INFO] U211.SIG(18)
[sigmove 11:34:04 DEBUG] transformed U211Ma.SPC -> U211MA.SPC
[sigmove 11:34:04 DEBUG] transformed U211Mb.SPC -> U211MB.SPC
[sigmove 11:34:04 DEBUG] transformed U211Mc.SPC -> U211MC.SPC
[sigmove 11:34:04 DEBUG] transformed U211Md.SPC -> U211MD.SPC
[sigmove 11:34:04 DEBUG] transformed U211Me.SPC -> U211ME.SPC
[sigmove 11:34:04 DEBUG] transformed U211Mf.SPC -> U211MF.SPC
[Status 11:34:04 INFO] data for U211 transferred to science data processing
[Tidy 11:34:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:34:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:34:04 INFO] resetting WatchDogTimer
[Status 11:34:05 INFO] Starting Set [AERI set: name V211, 6 scans, 0 angle, D16300 command]
[Ingest 11:34:05 INFO] Sending XML status message
[Status 11:34:05 INFO] Mirror angle: 0
[Mirror 11:34:05 INFO] rotating to position V
[Status 11:34:05 INFO] .SET file for ACQ96 ready
[Ingest 11:34:06 INFO] Starting acquisition
[Status 11:34:06 INFO] reading housekeeping
[Status 11:34:24 INFO] acquire complete
[Status 11:34:25 INFO] writing housekeeping
[Sequencer 11:34:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:34:25 INFO] incremented V scene to 211 completed views
[Sequencer 11:34:25 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:34:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:34:25 INFO] incremented to [AERI set: name W211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:34:25 INFO] V211.SIG(18)
[sigmove 11:34:25 DEBUG] transformed V211Ma.SPC -> V211MA.SPC
[sigmove 11:34:25 DEBUG] transformed V211Mb.SPC -> V211MB.SPC
[sigmove 11:34:25 DEBUG] transformed V211Mc.SPC -> V211MC.SPC
[sigmove 11:34:25 DEBUG] transformed V211Md.SPC -> V211MD.SPC
[sigmove 11:34:25 DEBUG] transformed V211Me.SPC -> V211ME.SPC
[sigmove 11:34:25 DEBUG] transformed V211Mf.SPC -> V211MF.SPC
[Status 11:34:25 INFO] data for V211 transferred to science data processing
[Tidy 11:34:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:34:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:34:25 INFO] resetting WatchDogTimer
[Status 11:34:25 INFO] Starting Set [AERI set: name W211, 6 scans, 0 angle, D16300 command]
[Ingest 11:34:25 INFO] Sending XML status message
[Status 11:34:25 INFO] Mirror angle: 0
[Mirror 11:34:25 INFO] rotating to position W
[Status 11:34:26 INFO] .SET file for ACQ96 ready
[Ingest 11:34:26 INFO] Starting acquisition
[Status 11:34:26 INFO] reading housekeeping
[Status 11:34:44 INFO] acquire complete
[Status 11:34:45 INFO] writing housekeeping
[Sequencer 11:34:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:34:45 INFO] incremented W scene to 211 completed views
[Sequencer 11:34:45 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:34:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:34:45 INFO] incremented to [AERI set: name X211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:34:45 INFO] W211.SIG(18)
[sigmove 11:34:45 DEBUG] transformed W211Ma.SPC -> W211MA.SPC
[sigmove 11:34:45 DEBUG] transformed W211Mb.SPC -> W211MB.SPC
[sigmove 11:34:45 DEBUG] transformed W211Mc.SPC -> W211MC.SPC
[sigmove 11:34:45 DEBUG] transformed W211Md.SPC -> W211MD.SPC
[sigmove 11:34:45 DEBUG] transformed W211Me.SPC -> W211ME.SPC
[sigmove 11:34:45 DEBUG] transformed W211Mf.SPC -> W211MF.SPC
[Status 11:34:45 INFO] data for W211 transferred to science data processing
[Tidy 11:34:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:34:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:34:45 INFO] resetting WatchDogTimer
[Status 11:34:45 INFO] Starting Set [AERI set: name X211, 6 scans, 0 angle, D16300 command]
[Ingest 11:34:45 INFO] Sending XML status message
[Status 11:34:45 INFO] Mirror angle: 0
[Mirror 11:34:45 INFO] rotating to position X
[Status 11:34:46 INFO] .SET file for ACQ96 ready
[Ingest 11:34:46 INFO] Starting acquisition
[Status 11:34:46 INFO] reading housekeeping
[Status 11:35:04 INFO] acquire complete
[Status 11:35:05 INFO] writing housekeeping
[Sequencer 11:35:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:35:05 INFO] incremented X scene to 211 completed views
[Sequencer 11:35:05 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:35:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:35:05 INFO] incremented to [AERI set: name Y211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:35:05 INFO] X211.SIG(18)
[sigmove 11:35:05 DEBUG] transformed X211Ma.SPC -> X211MA.SPC
[sigmove 11:35:05 DEBUG] transformed X211Mb.SPC -> X211MB.SPC
[sigmove 11:35:05 DEBUG] transformed X211Mc.SPC -> X211MC.SPC
[sigmove 11:35:05 DEBUG] transformed X211Md.SPC -> X211MD.SPC
[sigmove 11:35:05 DEBUG] transformed X211Me.SPC -> X211ME.SPC
[sigmove 11:35:05 DEBUG] transformed X211Mf.SPC -> X211MF.SPC
[Status 11:35:05 INFO] data for X211 transferred to science data processing
[Tidy 11:35:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:35:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:35:05 INFO] resetting WatchDogTimer
[Status 11:35:05 INFO] Starting Set [AERI set: name Y211, 6 scans, 0 angle, D16300 command]
[Ingest 11:35:05 INFO] Sending XML status message
[Status 11:35:05 INFO] Mirror angle: 0
[Mirror 11:35:06 INFO] rotating to position Y
[Status 11:35:06 INFO] .SET file for ACQ96 ready
[Ingest 11:35:06 INFO] Starting acquisition
[Status 11:35:06 INFO] reading housekeeping
[Status 11:35:24 INFO] acquire complete
[Status 11:35:25 INFO] writing housekeeping
[Sequencer 11:35:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:35:25 INFO] incremented Y scene to 211 completed views
[Sequencer 11:35:25 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:35:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:35:25 INFO] incremented to [AERI set: name Z211, 6 scans, 0 angle, D16300 command] set
[sigmove 11:35:25 INFO] Y211.SIG(18)
[sigmove 11:35:25 DEBUG] transformed Y211Ma.SPC -> Y211MA.SPC
[sigmove 11:35:25 DEBUG] transformed Y211Mb.SPC -> Y211MB.SPC
[sigmove 11:35:25 DEBUG] transformed Y211Mc.SPC -> Y211MC.SPC
[sigmove 11:35:25 DEBUG] transformed Y211Md.SPC -> Y211MD.SPC
[sigmove 11:35:25 DEBUG] transformed Y211Me.SPC -> Y211ME.SPC
[sigmove 11:35:25 DEBUG] transformed Y211Mf.SPC -> Y211MF.SPC
[Status 11:35:25 INFO] data for Y211 transferred to science data processing
[Tidy 11:35:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:35:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:35:25 INFO] resetting WatchDogTimer
[Status 11:35:25 INFO] Starting Set [AERI set: name Z211, 6 scans, 0 angle, D16300 command]
[Ingest 11:35:25 INFO] Sending XML status message
[Status 11:35:25 INFO] Mirror angle: 0
[Mirror 11:35:26 INFO] rotating to position Z
[Status 11:35:26 INFO] .SET file for ACQ96 ready
[Ingest 11:35:26 INFO] Starting acquisition
[Status 11:35:27 INFO] reading housekeeping
[Status 11:35:45 INFO] acquire complete
[Status 11:35:45 INFO] writing housekeeping
[Sequencer 11:35:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:35:45 INFO] incremented Z scene to 211 completed views
[Sequencer 11:35:45 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:35:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:35:45 INFO] incremented to [AERI set: name A212, 6 scans, 120 angle, D28300 command] set
[sigmove 11:35:45 INFO] Z211.SIG(18)
[sigmove 11:35:45 DEBUG] transformed Z211Ma.SPC -> Z211MA.SPC
[sigmove 11:35:45 DEBUG] transformed Z211Mb.SPC -> Z211MB.SPC
[sigmove 11:35:45 DEBUG] transformed Z211Mc.SPC -> Z211MC.SPC
[sigmove 11:35:45 DEBUG] transformed Z211Md.SPC -> Z211MD.SPC
[sigmove 11:35:45 DEBUG] transformed Z211Me.SPC -> Z211ME.SPC
[sigmove 11:35:45 DEBUG] transformed Z211Mf.SPC -> Z211MF.SPC
[Status 11:35:45 INFO] data for Z211 transferred to science data processing
[Tidy 11:35:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:35:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:35:45 INFO] resetting WatchDogTimer
[Status 11:35:46 INFO] Starting Set [AERI set: name A212, 6 scans, 120 angle, D28300 command]
[Ingest 11:35:46 INFO] Sending XML status message
[Status 11:35:46 INFO] Mirror angle: 120
[Mirror 11:35:46 INFO] rotating to position A
[Status 11:35:47 INFO] .SET file for ACQ96 ready
[Ingest 11:35:48 INFO] Starting acquisition
[Status 11:35:48 INFO] reading housekeeping
[Status 11:36:06 INFO] acquire complete
[Status 11:36:07 INFO] writing housekeeping
[Sequencer 11:36:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:36:07 INFO] incremented A scene to 212 completed views
[Sequencer 11:36:07 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:36:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:36:07 INFO] incremented to [AERI set: name H212, 6 scans, 60 angle, D22500 command] set
[sigmove 11:36:07 INFO] A212.SIG(18)
[sigmove 11:36:07 DEBUG] transformed A212Ma.SPC -> A212MA.SPC
[sigmove 11:36:07 DEBUG] transformed A212Mb.SPC -> A212MB.SPC
[sigmove 11:36:07 DEBUG] transformed A212Mc.SPC -> A212MC.SPC
[sigmove 11:36:07 DEBUG] transformed A212Md.SPC -> A212MD.SPC
[sigmove 11:36:07 DEBUG] transformed A212Me.SPC -> A212ME.SPC
[sigmove 11:36:07 DEBUG] transformed A212Mf.SPC -> A212MF.SPC
[Status 11:36:07 INFO] data for A212 transferred to science data processing
[Tidy 11:36:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:36:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:36:07 INFO] resetting WatchDogTimer
[Status 11:36:07 INFO] Starting Set [AERI set: name H212, 6 scans, 60 angle, D22500 command]
[Ingest 11:36:07 INFO] Sending XML status message
[Status 11:36:07 INFO] Mirror angle: 60
[Mirror 11:36:07 INFO] rotating to position H
[Status 11:36:08 INFO] .SET file for ACQ96 ready
[Ingest 11:36:08 INFO] Starting acquisition
[Status 11:36:09 INFO] reading housekeeping
[Status 11:36:26 INFO] acquire complete
[Status 11:36:27 INFO] writing housekeeping
[Sequencer 11:36:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:36:27 INFO] incremented H scene to 212 completed views
[Sequencer 11:36:27 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:36:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:36:27 INFO] incremented to [AERI set: name S212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:36:27 INFO] H212.SIG(18)
[sigmove 11:36:27 DEBUG] transformed H212Ma.SPC -> H212MA.SPC
[sigmove 11:36:27 DEBUG] transformed H212Mb.SPC -> H212MB.SPC
[sigmove 11:36:27 DEBUG] transformed H212Mc.SPC -> H212MC.SPC
[sigmove 11:36:27 DEBUG] transformed H212Md.SPC -> H212MD.SPC
[sigmove 11:36:27 DEBUG] transformed H212Me.SPC -> H212ME.SPC
[sigmove 11:36:27 DEBUG] transformed H212Mf.SPC -> H212MF.SPC
[Status 11:36:27 INFO] data for H212 transferred to science data processing
[Tidy 11:36:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:36:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:36:27 INFO] resetting WatchDogTimer
[Status 11:36:27 INFO] Starting Set [AERI set: name S212, 6 scans, 0 angle, D16300 command]
[Ingest 11:36:27 INFO] Sending XML status message
[Status 11:36:27 INFO] Mirror angle: 0
[Mirror 11:36:27 INFO] rotating to position S
[Status 11:36:28 INFO] .SET file for ACQ96 ready
[Ingest 11:36:29 INFO] Starting acquisition
[Status 11:36:29 INFO] reading housekeeping
[Status 11:36:46 INFO] acquire complete
[Status 11:36:47 INFO] writing housekeeping
[Sequencer 11:36:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:36:47 INFO] incremented S scene to 212 completed views
[Sequencer 11:36:47 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:36:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:36:47 INFO] incremented to [AERI set: name T212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:36:47 INFO] S212.SIG(18)
[sigmove 11:36:47 DEBUG] transformed S212Ma.SPC -> S212MA.SPC
[sigmove 11:36:47 DEBUG] transformed S212Mb.SPC -> S212MB.SPC
[sigmove 11:36:47 DEBUG] transformed S212Mc.SPC -> S212MC.SPC
[sigmove 11:36:47 DEBUG] transformed S212Md.SPC -> S212MD.SPC
[sigmove 11:36:47 DEBUG] transformed S212Me.SPC -> S212ME.SPC
[sigmove 11:36:47 DEBUG] transformed S212Mf.SPC -> S212MF.SPC
[Status 11:36:47 INFO] data for S212 transferred to science data processing
[Tidy 11:36:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:36:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:36:47 INFO] resetting WatchDogTimer
[Status 11:36:47 INFO] Starting Set [AERI set: name T212, 6 scans, 0 angle, D16300 command]
[Ingest 11:36:47 INFO] Sending XML status message
[Status 11:36:47 INFO] Mirror angle: 0
[Mirror 11:36:48 INFO] rotating to position T
[Status 11:36:48 INFO] .SET file for ACQ96 ready
[Ingest 11:36:48 INFO] Starting acquisition
[Status 11:36:49 INFO] reading housekeeping
[Status 11:37:06 INFO] acquire complete
[Status 11:37:07 INFO] writing housekeeping
[Sequencer 11:37:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:37:07 INFO] incremented T scene to 212 completed views
[Sequencer 11:37:07 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:37:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:37:07 INFO] incremented to [AERI set: name U212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:37:07 INFO] T212.SIG(18)
[sigmove 11:37:07 DEBUG] transformed T212Ma.SPC -> T212MA.SPC
[sigmove 11:37:07 DEBUG] transformed T212Mb.SPC -> T212MB.SPC
[sigmove 11:37:07 DEBUG] transformed T212Mc.SPC -> T212MC.SPC
[sigmove 11:37:07 DEBUG] transformed T212Md.SPC -> T212MD.SPC
[sigmove 11:37:07 DEBUG] transformed T212Me.SPC -> T212ME.SPC
[sigmove 11:37:07 DEBUG] transformed T212Mf.SPC -> T212MF.SPC
[Status 11:37:07 INFO] data for T212 transferred to science data processing
[Tidy 11:37:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:37:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:37:07 INFO] resetting WatchDogTimer
[Status 11:37:08 INFO] Starting Set [AERI set: name U212, 6 scans, 0 angle, D16300 command]
[Ingest 11:37:08 INFO] Sending XML status message
[Status 11:37:08 INFO] Mirror angle: 0
[Mirror 11:37:08 INFO] rotating to position U
[Status 11:37:08 INFO] .SET file for ACQ96 ready
[Ingest 11:37:09 INFO] Starting acquisition
[Status 11:37:09 INFO] reading housekeeping
[Status 11:37:27 INFO] acquire complete
[Status 11:37:27 INFO] writing housekeeping
[Sequencer 11:37:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:37:27 INFO] incremented U scene to 212 completed views
[Sequencer 11:37:27 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:37:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:37:27 INFO] incremented to [AERI set: name V212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:37:27 INFO] U212.SIG(18)
[sigmove 11:37:27 DEBUG] transformed U212Ma.SPC -> U212MA.SPC
[sigmove 11:37:27 DEBUG] transformed U212Mb.SPC -> U212MB.SPC
[sigmove 11:37:27 DEBUG] transformed U212Mc.SPC -> U212MC.SPC
[sigmove 11:37:27 DEBUG] transformed U212Md.SPC -> U212MD.SPC
[sigmove 11:37:27 DEBUG] transformed U212Me.SPC -> U212ME.SPC
[sigmove 11:37:27 DEBUG] transformed U212Mf.SPC -> U212MF.SPC
[Status 11:37:27 INFO] data for U212 transferred to science data processing
[Tidy 11:37:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:37:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:37:27 INFO] resetting WatchDogTimer
[Status 11:37:28 INFO] Starting Set [AERI set: name V212, 6 scans, 0 angle, D16300 command]
[Ingest 11:37:28 INFO] Sending XML status message
[Status 11:37:28 INFO] Mirror angle: 0
[Mirror 11:37:28 INFO] rotating to position V
[Status 11:37:29 INFO] .SET file for ACQ96 ready
[Ingest 11:37:29 INFO] Starting acquisition
[Status 11:37:29 INFO] reading housekeeping
[Status 11:37:47 INFO] acquire complete
[Status 11:37:48 INFO] writing housekeeping
[Sequencer 11:37:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:37:48 INFO] incremented V scene to 212 completed views
[Sequencer 11:37:48 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:37:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:37:48 INFO] incremented to [AERI set: name W212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:37:48 INFO] V212.SIG(18)
[sigmove 11:37:48 DEBUG] transformed V212Ma.SPC -> V212MA.SPC
[sigmove 11:37:48 DEBUG] transformed V212Mb.SPC -> V212MB.SPC
[sigmove 11:37:48 DEBUG] transformed V212Mc.SPC -> V212MC.SPC
[sigmove 11:37:48 DEBUG] transformed V212Md.SPC -> V212MD.SPC
[sigmove 11:37:48 DEBUG] transformed V212Me.SPC -> V212ME.SPC
[sigmove 11:37:48 DEBUG] transformed V212Mf.SPC -> V212MF.SPC
[Status 11:37:48 INFO] data for V212 transferred to science data processing
[Tidy 11:37:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:37:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:37:48 INFO] resetting WatchDogTimer
[Status 11:37:48 INFO] Starting Set [AERI set: name W212, 6 scans, 0 angle, D16300 command]
[Ingest 11:37:48 INFO] Sending XML status message
[Status 11:37:48 INFO] Mirror angle: 0
[Mirror 11:37:48 INFO] rotating to position W
[Status 11:37:49 INFO] .SET file for ACQ96 ready
[Ingest 11:37:49 INFO] Starting acquisition
[Status 11:37:49 INFO] reading housekeeping
[Status 11:38:07 INFO] acquire complete
[Status 11:38:08 INFO] writing housekeeping
[Sequencer 11:38:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:38:08 INFO] incremented W scene to 212 completed views
[Sequencer 11:38:08 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:38:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:38:08 INFO] incremented to [AERI set: name X212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:38:08 INFO] W212.SIG(18)
[sigmove 11:38:08 DEBUG] transformed W212Ma.SPC -> W212MA.SPC
[sigmove 11:38:08 DEBUG] transformed W212Mb.SPC -> W212MB.SPC
[sigmove 11:38:08 DEBUG] transformed W212Mc.SPC -> W212MC.SPC
[sigmove 11:38:08 DEBUG] transformed W212Md.SPC -> W212MD.SPC
[sigmove 11:38:08 DEBUG] transformed W212Me.SPC -> W212ME.SPC
[sigmove 11:38:08 DEBUG] transformed W212Mf.SPC -> W212MF.SPC
[Status 11:38:08 INFO] data for W212 transferred to science data processing
[Tidy 11:38:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:38:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:38:08 INFO] resetting WatchDogTimer
[Status 11:38:08 INFO] Starting Set [AERI set: name X212, 6 scans, 0 angle, D16300 command]
[Ingest 11:38:08 INFO] Sending XML status message
[Status 11:38:08 INFO] Mirror angle: 0
[Mirror 11:38:09 INFO] rotating to position X
[Status 11:38:09 INFO] .SET file for ACQ96 ready
[Ingest 11:38:09 INFO] Starting acquisition
[Status 11:38:09 INFO] reading housekeeping
[Status 11:38:27 INFO] acquire complete
[Status 11:38:28 INFO] writing housekeeping
[Sequencer 11:38:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:38:28 INFO] incremented X scene to 212 completed views
[Sequencer 11:38:28 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:38:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:38:28 INFO] incremented to [AERI set: name Y212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:38:28 INFO] X212.SIG(18)
[sigmove 11:38:28 DEBUG] transformed X212Ma.SPC -> X212MA.SPC
[sigmove 11:38:28 DEBUG] transformed X212Mb.SPC -> X212MB.SPC
[sigmove 11:38:28 DEBUG] transformed X212Mc.SPC -> X212MC.SPC
[sigmove 11:38:28 DEBUG] transformed X212Md.SPC -> X212MD.SPC
[sigmove 11:38:28 DEBUG] transformed X212Me.SPC -> X212ME.SPC
[sigmove 11:38:28 DEBUG] transformed X212Mf.SPC -> X212MF.SPC
[Status 11:38:28 INFO] data for X212 transferred to science data processing
[Tidy 11:38:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:38:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:38:28 INFO] resetting WatchDogTimer
[Status 11:38:28 INFO] Starting Set [AERI set: name Y212, 6 scans, 0 angle, D16300 command]
[Ingest 11:38:28 INFO] Sending XML status message
[Status 11:38:28 INFO] Mirror angle: 0
[Mirror 11:38:29 INFO] rotating to position Y
[Status 11:38:29 INFO] .SET file for ACQ96 ready
[Ingest 11:38:29 INFO] Starting acquisition
[Status 11:38:30 INFO] reading housekeeping
[Status 11:38:47 INFO] acquire complete
[Status 11:38:48 INFO] writing housekeeping
[Sequencer 11:38:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:38:48 INFO] incremented Y scene to 212 completed views
[Sequencer 11:38:48 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:38:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:38:48 INFO] incremented to [AERI set: name Z212, 6 scans, 0 angle, D16300 command] set
[sigmove 11:38:48 INFO] Y212.SIG(18)
[sigmove 11:38:48 DEBUG] transformed Y212Ma.SPC -> Y212MA.SPC
[sigmove 11:38:48 DEBUG] transformed Y212Mb.SPC -> Y212MB.SPC
[sigmove 11:38:48 DEBUG] transformed Y212Mc.SPC -> Y212MC.SPC
[sigmove 11:38:48 DEBUG] transformed Y212Md.SPC -> Y212MD.SPC
[sigmove 11:38:48 DEBUG] transformed Y212Me.SPC -> Y212ME.SPC
[sigmove 11:38:48 DEBUG] transformed Y212Mf.SPC -> Y212MF.SPC
[Status 11:38:48 INFO] data for Y212 transferred to science data processing
[Tidy 11:38:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:38:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:38:48 INFO] resetting WatchDogTimer
[Status 11:38:49 INFO] Starting Set [AERI set: name Z212, 6 scans, 0 angle, D16300 command]
[Ingest 11:38:49 INFO] Sending XML status message
[Status 11:38:49 INFO] Mirror angle: 0
[Mirror 11:38:49 INFO] rotating to position Z
[Status 11:38:49 INFO] .SET file for ACQ96 ready
[Ingest 11:38:49 INFO] Starting acquisition
[Status 11:38:50 INFO] reading housekeeping
[Status 11:39:08 INFO] acquire complete
[Status 11:39:08 INFO] writing housekeeping
[Sequencer 11:39:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:39:08 INFO] incremented Z scene to 212 completed views
[Sequencer 11:39:08 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:39:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:39:08 INFO] incremented to [AERI set: name H213, 6 scans, 60 angle, D22500 command] set
[sigmove 11:39:08 INFO] Z212.SIG(18)
[sigmove 11:39:08 DEBUG] transformed Z212Ma.SPC -> Z212MA.SPC
[sigmove 11:39:08 DEBUG] transformed Z212Mb.SPC -> Z212MB.SPC
[sigmove 11:39:08 DEBUG] transformed Z212Mc.SPC -> Z212MC.SPC
[sigmove 11:39:08 DEBUG] transformed Z212Md.SPC -> Z212MD.SPC
[sigmove 11:39:08 DEBUG] transformed Z212Me.SPC -> Z212ME.SPC
[sigmove 11:39:08 DEBUG] transformed Z212Mf.SPC -> Z212MF.SPC
[Status 11:39:08 INFO] data for Z212 transferred to science data processing
[Tidy 11:39:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:39:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:39:08 INFO] resetting WatchDogTimer
[Status 11:39:09 INFO] Starting Set [AERI set: name H213, 6 scans, 60 angle, D22500 command]
[Ingest 11:39:09 INFO] Sending XML status message
[Status 11:39:09 INFO] Mirror angle: 60
[Mirror 11:39:09 INFO] rotating to position H
[Status 11:39:10 INFO] .SET file for ACQ96 ready
[Ingest 11:39:10 INFO] Starting acquisition
[Status 11:39:10 INFO] reading housekeeping
[Status 11:39:28 INFO] acquire complete
[Status 11:39:29 INFO] writing housekeeping
[Sequencer 11:39:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:39:29 INFO] incremented H scene to 213 completed views
[Sequencer 11:39:29 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:39:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:39:29 INFO] incremented to [AERI set: name A213, 6 scans, 120 angle, D28300 command] set
[sigmove 11:39:29 INFO] H213.SIG(18)
[sigmove 11:39:29 DEBUG] transformed H213Ma.SPC -> H213MA.SPC
[sigmove 11:39:29 DEBUG] transformed H213Mb.SPC -> H213MB.SPC
[sigmove 11:39:29 DEBUG] transformed H213Mc.SPC -> H213MC.SPC
[sigmove 11:39:29 DEBUG] transformed H213Md.SPC -> H213MD.SPC
[sigmove 11:39:29 DEBUG] transformed H213Me.SPC -> H213ME.SPC
[sigmove 11:39:29 DEBUG] transformed H213Mf.SPC -> H213MF.SPC
[Status 11:39:29 INFO] data for H213 transferred to science data processing
[Tidy 11:39:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:39:29 INFO] A211.FIN(19),H211.FIN(19),S211.FIN(19),T211.FIN(19),U211.FIN(19),V211.FIN(19),W211.FIN(19),X211.FIN(19),Y211.FIN(19),Z211.FIN(19),A212.FIN(19),H212.FIN(19),S212.FIN(19),T212.FIN(19),U212.FIN(19),V212.FIN(19),W212.FIN(19),X212.FIN(19),Y212.FIN(19),Z212.FIN(19)
[sigmove 11:39:29 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:39:29 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:39:32 DEBUG] done zipping
[WatchDog 11:39:33 INFO] resetting WatchDogTimer
[Status 11:39:33 INFO] Starting Set [AERI set: name A213, 6 scans, 120 angle, D28300 command]
[Ingest 11:39:33 INFO] Sending XML status message
[Status 11:39:33 INFO] Mirror angle: 120
[Mirror 11:39:33 INFO] rotating to position A
[Status 11:39:34 INFO] .SET file for ACQ96 ready
[Ingest 11:39:35 INFO] Starting acquisition
[Status 11:39:35 INFO] reading housekeeping
[Status 11:39:53 INFO] acquire complete
[Status 11:39:53 INFO] writing housekeeping
[Sequencer 11:39:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:39:53 INFO] incremented A scene to 213 completed views
[Sequencer 11:39:53 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:39:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:39:53 INFO] incremented to [AERI set: name S213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:39:53 INFO] A213.SIG(18)
[sigmove 11:39:53 DEBUG] transformed A213Ma.SPC -> A213MA.SPC
[sigmove 11:39:53 DEBUG] transformed A213Mb.SPC -> A213MB.SPC
[sigmove 11:39:53 DEBUG] transformed A213Mc.SPC -> A213MC.SPC
[sigmove 11:39:53 DEBUG] transformed A213Md.SPC -> A213MD.SPC
[sigmove 11:39:53 DEBUG] transformed A213Me.SPC -> A213ME.SPC
[sigmove 11:39:53 DEBUG] transformed A213Mf.SPC -> A213MF.SPC
[Status 11:39:53 INFO] data for A213 transferred to science data processing
[Tidy 11:39:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:39:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:39:53 INFO] resetting WatchDogTimer
[Status 11:39:54 INFO] Starting Set [AERI set: name S213, 6 scans, 0 angle, D16300 command]
[Ingest 11:39:54 INFO] Sending XML status message
[Status 11:39:54 INFO] Mirror angle: 0
[Mirror 11:39:54 INFO] rotating to position S
[Status 11:39:55 INFO] .SET file for ACQ96 ready
[Ingest 11:39:56 INFO] Starting acquisition
[Status 11:39:56 INFO] reading housekeeping
[Status 11:40:14 INFO] acquire complete
[Status 11:40:15 INFO] writing housekeeping
[Sequencer 11:40:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:40:15 INFO] incremented S scene to 213 completed views
[Sequencer 11:40:15 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:40:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:40:15 INFO] incremented to [AERI set: name T213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:40:15 INFO] S213.SIG(18)
[sigmove 11:40:15 DEBUG] transformed S213Ma.SPC -> S213MA.SPC
[sigmove 11:40:15 DEBUG] transformed S213Mb.SPC -> S213MB.SPC
[sigmove 11:40:15 DEBUG] transformed S213Mc.SPC -> S213MC.SPC
[sigmove 11:40:15 DEBUG] transformed S213Md.SPC -> S213MD.SPC
[sigmove 11:40:15 DEBUG] transformed S213Me.SPC -> S213ME.SPC
[sigmove 11:40:15 DEBUG] transformed S213Mf.SPC -> S213MF.SPC
[Status 11:40:15 INFO] data for S213 transferred to science data processing
[Tidy 11:40:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:40:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:40:15 INFO] resetting WatchDogTimer
[Status 11:40:15 INFO] Starting Set [AERI set: name T213, 6 scans, 0 angle, D16300 command]
[Ingest 11:40:15 INFO] Sending XML status message
[Status 11:40:15 INFO] Mirror angle: 0
[Mirror 11:40:15 INFO] rotating to position T
[Status 11:40:16 INFO] .SET file for ACQ96 ready
[Ingest 11:40:16 INFO] Starting acquisition
[Status 11:40:16 INFO] reading housekeeping
[Status 11:40:34 INFO] acquire complete
[Status 11:40:35 INFO] writing housekeeping
[Sequencer 11:40:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:40:35 INFO] incremented T scene to 213 completed views
[Sequencer 11:40:35 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:40:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:40:35 INFO] incremented to [AERI set: name U213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:40:35 INFO] T213.SIG(18)
[sigmove 11:40:35 DEBUG] transformed T213Ma.SPC -> T213MA.SPC
[sigmove 11:40:35 DEBUG] transformed T213Mb.SPC -> T213MB.SPC
[sigmove 11:40:35 DEBUG] transformed T213Mc.SPC -> T213MC.SPC
[sigmove 11:40:35 DEBUG] transformed T213Md.SPC -> T213MD.SPC
[sigmove 11:40:35 DEBUG] transformed T213Me.SPC -> T213ME.SPC
[sigmove 11:40:35 DEBUG] transformed T213Mf.SPC -> T213MF.SPC
[Status 11:40:35 INFO] data for T213 transferred to science data processing
[Tidy 11:40:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:40:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:40:35 INFO] resetting WatchDogTimer
[Status 11:40:36 INFO] Starting Set [AERI set: name U213, 6 scans, 0 angle, D16300 command]
[Ingest 11:40:36 INFO] Sending XML status message
[Status 11:40:36 INFO] Mirror angle: 0
[Mirror 11:40:36 INFO] rotating to position U
[Status 11:40:37 INFO] .SET file for ACQ96 ready
[Ingest 11:40:37 INFO] Starting acquisition
[Status 11:40:37 INFO] reading housekeeping
[Status 11:40:55 INFO] acquire complete
[Status 11:40:56 INFO] writing housekeeping
[Sequencer 11:40:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:40:56 INFO] incremented U scene to 213 completed views
[Sequencer 11:40:56 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:40:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:40:56 INFO] incremented to [AERI set: name V213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:40:56 INFO] U213.SIG(18)
[sigmove 11:40:56 DEBUG] transformed U213Ma.SPC -> U213MA.SPC
[sigmove 11:40:56 DEBUG] transformed U213Mb.SPC -> U213MB.SPC
[sigmove 11:40:56 DEBUG] transformed U213Mc.SPC -> U213MC.SPC
[sigmove 11:40:56 DEBUG] transformed U213Md.SPC -> U213MD.SPC
[sigmove 11:40:56 DEBUG] transformed U213Me.SPC -> U213ME.SPC
[sigmove 11:40:56 DEBUG] transformed U213Mf.SPC -> U213MF.SPC
[Status 11:40:56 INFO] data for U213 transferred to science data processing
[Tidy 11:40:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:40:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:40:56 INFO] resetting WatchDogTimer
[Status 11:40:56 INFO] Starting Set [AERI set: name V213, 6 scans, 0 angle, D16300 command]
[Ingest 11:40:56 INFO] Sending XML status message
[Status 11:40:56 INFO] Mirror angle: 0
[Mirror 11:40:57 INFO] rotating to position V
[Status 11:40:57 INFO] .SET file for ACQ96 ready
[Ingest 11:40:57 INFO] Starting acquisition
[Status 11:40:58 INFO] reading housekeeping
[Status 11:41:16 INFO] acquire complete
[Status 11:41:16 INFO] writing housekeeping
[Sequencer 11:41:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:41:16 INFO] incremented V scene to 213 completed views
[Sequencer 11:41:16 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:41:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:41:16 INFO] incremented to [AERI set: name W213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:41:16 INFO] V213.SIG(18)
[sigmove 11:41:16 DEBUG] transformed V213Ma.SPC -> V213MA.SPC
[sigmove 11:41:16 DEBUG] transformed V213Mb.SPC -> V213MB.SPC
[sigmove 11:41:16 DEBUG] transformed V213Mc.SPC -> V213MC.SPC
[sigmove 11:41:16 DEBUG] transformed V213Md.SPC -> V213MD.SPC
[sigmove 11:41:16 DEBUG] transformed V213Me.SPC -> V213ME.SPC
[sigmove 11:41:16 DEBUG] transformed V213Mf.SPC -> V213MF.SPC
[Status 11:41:16 INFO] data for V213 transferred to science data processing
[Tidy 11:41:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:41:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:41:16 INFO] resetting WatchDogTimer
[Status 11:41:17 INFO] Starting Set [AERI set: name W213, 6 scans, 0 angle, D16300 command]
[Ingest 11:41:17 INFO] Sending XML status message
[Status 11:41:17 INFO] Mirror angle: 0
[Mirror 11:41:17 INFO] rotating to position W
[Status 11:41:17 INFO] .SET file for ACQ96 ready
[Ingest 11:41:18 INFO] Starting acquisition
[Status 11:41:18 INFO] reading housekeeping
[Status 11:41:36 INFO] acquire complete
[Status 11:41:37 INFO] writing housekeeping
[Sequencer 11:41:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:41:37 INFO] incremented W scene to 213 completed views
[Sequencer 11:41:37 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:41:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:41:37 INFO] incremented to [AERI set: name X213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:41:37 INFO] W213.SIG(18)
[sigmove 11:41:37 DEBUG] transformed W213Ma.SPC -> W213MA.SPC
[sigmove 11:41:37 DEBUG] transformed W213Mb.SPC -> W213MB.SPC
[sigmove 11:41:37 DEBUG] transformed W213Mc.SPC -> W213MC.SPC
[sigmove 11:41:37 DEBUG] transformed W213Md.SPC -> W213MD.SPC
[sigmove 11:41:37 DEBUG] transformed W213Me.SPC -> W213ME.SPC
[sigmove 11:41:37 DEBUG] transformed W213Mf.SPC -> W213MF.SPC
[Status 11:41:37 INFO] data for W213 transferred to science data processing
[Tidy 11:41:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:41:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:41:37 INFO] resetting WatchDogTimer
[Status 11:41:37 INFO] Starting Set [AERI set: name X213, 6 scans, 0 angle, D16300 command]
[Ingest 11:41:37 INFO] Sending XML status message
[Status 11:41:37 INFO] Mirror angle: 0
[Mirror 11:41:37 INFO] rotating to position X
[Status 11:41:38 INFO] .SET file for ACQ96 ready
[Ingest 11:41:38 INFO] Starting acquisition
[Status 11:41:38 INFO] reading housekeeping
[Status 11:41:56 INFO] acquire complete
[Status 11:41:57 INFO] writing housekeeping
[Sequencer 11:41:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:41:57 INFO] incremented X scene to 213 completed views
[Sequencer 11:41:57 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:41:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:41:57 INFO] incremented to [AERI set: name Y213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:41:57 INFO] X213.SIG(18)
[sigmove 11:41:57 DEBUG] transformed X213Ma.SPC -> X213MA.SPC
[sigmove 11:41:57 DEBUG] transformed X213Mb.SPC -> X213MB.SPC
[sigmove 11:41:57 DEBUG] transformed X213Mc.SPC -> X213MC.SPC
[sigmove 11:41:57 DEBUG] transformed X213Md.SPC -> X213MD.SPC
[sigmove 11:41:57 DEBUG] transformed X213Me.SPC -> X213ME.SPC
[sigmove 11:41:57 DEBUG] transformed X213Mf.SPC -> X213MF.SPC
[Status 11:41:57 INFO] data for X213 transferred to science data processing
[Tidy 11:41:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:41:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:41:57 INFO] resetting WatchDogTimer
[Status 11:41:57 INFO] Starting Set [AERI set: name Y213, 6 scans, 0 angle, D16300 command]
[Ingest 11:41:57 INFO] Sending XML status message
[Status 11:41:57 INFO] Mirror angle: 0
[Mirror 11:41:57 INFO] rotating to position Y
[Status 11:41:58 INFO] .SET file for ACQ96 ready
[Ingest 11:41:58 INFO] Starting acquisition
[Status 11:41:58 INFO] reading housekeeping
[Status 11:42:16 INFO] acquire complete
[Status 11:42:17 INFO] writing housekeeping
[Sequencer 11:42:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:42:17 INFO] incremented Y scene to 213 completed views
[Sequencer 11:42:17 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:42:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:42:17 INFO] incremented to [AERI set: name Z213, 6 scans, 0 angle, D16300 command] set
[sigmove 11:42:17 INFO] Y213.SIG(18)
[sigmove 11:42:17 DEBUG] transformed Y213Ma.SPC -> Y213MA.SPC
[sigmove 11:42:17 DEBUG] transformed Y213Mb.SPC -> Y213MB.SPC
[sigmove 11:42:17 DEBUG] transformed Y213Mc.SPC -> Y213MC.SPC
[sigmove 11:42:17 DEBUG] transformed Y213Md.SPC -> Y213MD.SPC
[sigmove 11:42:17 DEBUG] transformed Y213Me.SPC -> Y213ME.SPC
[sigmove 11:42:17 DEBUG] transformed Y213Mf.SPC -> Y213MF.SPC
[Status 11:42:17 INFO] data for Y213 transferred to science data processing
[Tidy 11:42:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:42:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:42:17 INFO] resetting WatchDogTimer
[Status 11:42:17 INFO] Starting Set [AERI set: name Z213, 6 scans, 0 angle, D16300 command]
[Ingest 11:42:17 INFO] Sending XML status message
[Status 11:42:17 INFO] Mirror angle: 0
[Mirror 11:42:18 INFO] rotating to position Z
[Status 11:42:18 INFO] .SET file for ACQ96 ready
[Ingest 11:42:18 INFO] Starting acquisition
[Status 11:42:19 INFO] reading housekeeping
[Status 11:42:36 INFO] acquire complete
[Status 11:42:37 INFO] writing housekeeping
[Sequencer 11:42:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:42:37 INFO] incremented Z scene to 213 completed views
[Sequencer 11:42:37 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:42:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:42:37 INFO] incremented to [AERI set: name A214, 6 scans, 120 angle, D28300 command] set
[sigmove 11:42:37 INFO] Z213.SIG(18)
[sigmove 11:42:37 DEBUG] transformed Z213Ma.SPC -> Z213MA.SPC
[sigmove 11:42:37 DEBUG] transformed Z213Mb.SPC -> Z213MB.SPC
[sigmove 11:42:37 DEBUG] transformed Z213Mc.SPC -> Z213MC.SPC
[sigmove 11:42:37 DEBUG] transformed Z213Md.SPC -> Z213MD.SPC
[sigmove 11:42:37 DEBUG] transformed Z213Me.SPC -> Z213ME.SPC
[sigmove 11:42:37 DEBUG] transformed Z213Mf.SPC -> Z213MF.SPC
[Status 11:42:37 INFO] data for Z213 transferred to science data processing
[Tidy 11:42:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:42:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:42:37 INFO] resetting WatchDogTimer
[Status 11:42:37 INFO] Starting Set [AERI set: name A214, 6 scans, 120 angle, D28300 command]
[Ingest 11:42:37 INFO] Sending XML status message
[Status 11:42:37 INFO] Mirror angle: 120
[Mirror 11:42:38 INFO] rotating to position A
[Status 11:42:39 INFO] .SET file for ACQ96 ready
[Ingest 11:42:39 INFO] Starting acquisition
[Status 11:42:40 INFO] reading housekeeping
[Status 11:42:58 INFO] acquire complete
[Status 11:42:58 INFO] writing housekeeping
[Sequencer 11:42:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:42:58 INFO] incremented A scene to 214 completed views
[Sequencer 11:42:58 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:42:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:42:58 INFO] incremented to [AERI set: name H214, 6 scans, 60 angle, D22500 command] set
[sigmove 11:42:58 INFO] A214.SIG(18)
[sigmove 11:42:58 DEBUG] transformed A214Ma.SPC -> A214MA.SPC
[sigmove 11:42:58 DEBUG] transformed A214Mb.SPC -> A214MB.SPC
[sigmove 11:42:58 DEBUG] transformed A214Mc.SPC -> A214MC.SPC
[sigmove 11:42:58 DEBUG] transformed A214Md.SPC -> A214MD.SPC
[sigmove 11:42:58 DEBUG] transformed A214Me.SPC -> A214ME.SPC
[sigmove 11:42:58 DEBUG] transformed A214Mf.SPC -> A214MF.SPC
[Status 11:42:58 INFO] data for A214 transferred to science data processing
[Tidy 11:42:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:42:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:42:58 INFO] resetting WatchDogTimer
[Status 11:42:59 INFO] Starting Set [AERI set: name H214, 6 scans, 60 angle, D22500 command]
[Ingest 11:42:59 INFO] Sending XML status message
[Status 11:42:59 INFO] Mirror angle: 60
[Mirror 11:42:59 INFO] rotating to position H
[Status 11:43:00 INFO] .SET file for ACQ96 ready
[Ingest 11:43:00 INFO] Starting acquisition
[Status 11:43:01 INFO] reading housekeeping
[Status 11:43:18 INFO] acquire complete
[Status 11:43:19 INFO] writing housekeeping
[Sequencer 11:43:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:43:19 INFO] incremented H scene to 214 completed views
[Sequencer 11:43:19 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:43:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:43:19 INFO] incremented to [AERI set: name S214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:43:19 INFO] H214.SIG(18)
[sigmove 11:43:19 DEBUG] transformed H214Ma.SPC -> H214MA.SPC
[sigmove 11:43:19 DEBUG] transformed H214Mb.SPC -> H214MB.SPC
[sigmove 11:43:19 DEBUG] transformed H214Mc.SPC -> H214MC.SPC
[sigmove 11:43:19 DEBUG] transformed H214Md.SPC -> H214MD.SPC
[sigmove 11:43:19 DEBUG] transformed H214Me.SPC -> H214ME.SPC
[sigmove 11:43:19 DEBUG] transformed H214Mf.SPC -> H214MF.SPC
[Status 11:43:19 INFO] data for H214 transferred to science data processing
[Tidy 11:43:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:43:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:43:19 INFO] resetting WatchDogTimer
[Status 11:43:19 INFO] Starting Set [AERI set: name S214, 6 scans, 0 angle, D16300 command]
[Ingest 11:43:19 INFO] Sending XML status message
[Status 11:43:19 INFO] Mirror angle: 0
[Mirror 11:43:19 INFO] rotating to position S
[Status 11:43:20 INFO] .SET file for ACQ96 ready
[Ingest 11:43:20 INFO] Starting acquisition
[Status 11:43:21 INFO] reading housekeeping
[Status 11:43:39 INFO] acquire complete
[Status 11:43:40 INFO] writing housekeeping
[Sequencer 11:43:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:43:40 INFO] incremented S scene to 214 completed views
[Sequencer 11:43:40 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:43:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:43:40 INFO] incremented to [AERI set: name T214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:43:40 INFO] S214.SIG(18)
[sigmove 11:43:40 DEBUG] transformed S214Ma.SPC -> S214MA.SPC
[sigmove 11:43:40 DEBUG] transformed S214Mb.SPC -> S214MB.SPC
[sigmove 11:43:40 DEBUG] transformed S214Mc.SPC -> S214MC.SPC
[sigmove 11:43:40 DEBUG] transformed S214Md.SPC -> S214MD.SPC
[sigmove 11:43:40 DEBUG] transformed S214Me.SPC -> S214ME.SPC
[sigmove 11:43:40 DEBUG] transformed S214Mf.SPC -> S214MF.SPC
[Status 11:43:40 INFO] data for S214 transferred to science data processing
[Tidy 11:43:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:43:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:43:40 INFO] resetting WatchDogTimer
[Status 11:43:40 INFO] Starting Set [AERI set: name T214, 6 scans, 0 angle, D16300 command]
[Ingest 11:43:40 INFO] Sending XML status message
[Status 11:43:40 INFO] Mirror angle: 0
[Mirror 11:43:41 INFO] rotating to position T
[Status 11:43:41 INFO] .SET file for ACQ96 ready
[Ingest 11:43:41 INFO] Starting acquisition
[Status 11:43:42 INFO] reading housekeeping
[Status 11:43:59 INFO] acquire complete
[Status 11:44:00 INFO] writing housekeeping
[Sequencer 11:44:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:44:00 INFO] incremented T scene to 214 completed views
[Sequencer 11:44:00 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:44:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:44:00 INFO] incremented to [AERI set: name U214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:44:00 INFO] T214.SIG(18)
[sigmove 11:44:00 DEBUG] transformed T214Ma.SPC -> T214MA.SPC
[sigmove 11:44:00 DEBUG] transformed T214Mb.SPC -> T214MB.SPC
[sigmove 11:44:00 DEBUG] transformed T214Mc.SPC -> T214MC.SPC
[sigmove 11:44:00 DEBUG] transformed T214Md.SPC -> T214MD.SPC
[sigmove 11:44:00 DEBUG] transformed T214Me.SPC -> T214ME.SPC
[sigmove 11:44:00 DEBUG] transformed T214Mf.SPC -> T214MF.SPC
[Status 11:44:00 INFO] data for T214 transferred to science data processing
[Tidy 11:44:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:44:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:44:00 INFO] resetting WatchDogTimer
[Status 11:44:00 INFO] Starting Set [AERI set: name U214, 6 scans, 0 angle, D16300 command]
[Ingest 11:44:00 INFO] Sending XML status message
[Status 11:44:00 INFO] Mirror angle: 0
[Mirror 11:44:01 INFO] rotating to position U
[Status 11:44:01 INFO] .SET file for ACQ96 ready
[Ingest 11:44:01 INFO] Starting acquisition
[Status 11:44:02 INFO] reading housekeeping
[Status 11:44:20 INFO] acquire complete
[Status 11:44:20 INFO] writing housekeeping
[Sequencer 11:44:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:44:20 INFO] incremented U scene to 214 completed views
[Sequencer 11:44:20 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:44:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:44:20 INFO] incremented to [AERI set: name V214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:44:20 INFO] U214.SIG(18)
[sigmove 11:44:20 DEBUG] transformed U214Ma.SPC -> U214MA.SPC
[sigmove 11:44:20 DEBUG] transformed U214Mb.SPC -> U214MB.SPC
[sigmove 11:44:20 DEBUG] transformed U214Mc.SPC -> U214MC.SPC
[sigmove 11:44:20 DEBUG] transformed U214Md.SPC -> U214MD.SPC
[sigmove 11:44:20 DEBUG] transformed U214Me.SPC -> U214ME.SPC
[sigmove 11:44:20 DEBUG] transformed U214Mf.SPC -> U214MF.SPC
[Status 11:44:20 INFO] data for U214 transferred to science data processing
[Tidy 11:44:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:44:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:44:20 INFO] resetting WatchDogTimer
[Status 11:44:21 INFO] Starting Set [AERI set: name V214, 6 scans, 0 angle, D16300 command]
[Ingest 11:44:21 INFO] Sending XML status message
[Status 11:44:21 INFO] Mirror angle: 0
[Mirror 11:44:21 INFO] rotating to position V
[Status 11:44:21 INFO] .SET file for ACQ96 ready
[Ingest 11:44:22 INFO] Starting acquisition
[Status 11:44:22 INFO] reading housekeeping
[Status 11:44:40 INFO] acquire complete
[Status 11:44:41 INFO] writing housekeeping
[Sequencer 11:44:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:44:41 INFO] incremented V scene to 214 completed views
[Sequencer 11:44:41 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:44:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:44:41 INFO] incremented to [AERI set: name W214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:44:41 INFO] V214.SIG(18)
[sigmove 11:44:41 DEBUG] transformed V214Ma.SPC -> V214MA.SPC
[sigmove 11:44:41 DEBUG] transformed V214Mb.SPC -> V214MB.SPC
[sigmove 11:44:41 DEBUG] transformed V214Mc.SPC -> V214MC.SPC
[sigmove 11:44:41 DEBUG] transformed V214Md.SPC -> V214MD.SPC
[sigmove 11:44:41 DEBUG] transformed V214Me.SPC -> V214ME.SPC
[sigmove 11:44:41 DEBUG] transformed V214Mf.SPC -> V214MF.SPC
[Status 11:44:41 INFO] data for V214 transferred to science data processing
[Tidy 11:44:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:44:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:44:41 INFO] resetting WatchDogTimer
[Status 11:44:41 INFO] Starting Set [AERI set: name W214, 6 scans, 0 angle, D16300 command]
[Ingest 11:44:41 INFO] Sending XML status message
[Status 11:44:41 INFO] Mirror angle: 0
[Mirror 11:44:41 INFO] rotating to position W
[Status 11:44:42 INFO] .SET file for ACQ96 ready
[Ingest 11:44:42 INFO] Starting acquisition
[Status 11:44:42 INFO] reading housekeeping
[Status 11:45:00 INFO] acquire complete
[Status 11:45:01 INFO] writing housekeeping
[Sequencer 11:45:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:45:01 INFO] incremented W scene to 214 completed views
[Sequencer 11:45:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:45:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:45:01 INFO] incremented to [AERI set: name X214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:45:01 INFO] W214.SIG(18)
[sigmove 11:45:01 DEBUG] transformed W214Ma.SPC -> W214MA.SPC
[sigmove 11:45:01 DEBUG] transformed W214Mb.SPC -> W214MB.SPC
[sigmove 11:45:01 DEBUG] transformed W214Mc.SPC -> W214MC.SPC
[sigmove 11:45:01 DEBUG] transformed W214Md.SPC -> W214MD.SPC
[sigmove 11:45:01 DEBUG] transformed W214Me.SPC -> W214ME.SPC
[sigmove 11:45:01 DEBUG] transformed W214Mf.SPC -> W214MF.SPC
[Status 11:45:01 INFO] data for W214 transferred to science data processing
[Tidy 11:45:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:45:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:45:01 INFO] resetting WatchDogTimer
[Status 11:45:01 INFO] Starting Set [AERI set: name X214, 6 scans, 0 angle, D16300 command]
[Ingest 11:45:01 INFO] Sending XML status message
[Status 11:45:01 INFO] Mirror angle: 0
[Mirror 11:45:01 INFO] rotating to position X
[Status 11:45:02 INFO] .SET file for ACQ96 ready
[Ingest 11:45:02 INFO] Starting acquisition
[Status 11:45:02 INFO] reading housekeeping
[Status 11:45:20 INFO] acquire complete
[Status 11:45:21 INFO] writing housekeeping
[Sequencer 11:45:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:45:21 INFO] incremented X scene to 214 completed views
[Sequencer 11:45:21 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:45:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:45:21 INFO] incremented to [AERI set: name Y214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:45:21 INFO] X214.SIG(18)
[sigmove 11:45:21 DEBUG] transformed X214Ma.SPC -> X214MA.SPC
[sigmove 11:45:21 DEBUG] transformed X214Mb.SPC -> X214MB.SPC
[sigmove 11:45:21 DEBUG] transformed X214Mc.SPC -> X214MC.SPC
[sigmove 11:45:21 DEBUG] transformed X214Md.SPC -> X214MD.SPC
[sigmove 11:45:21 DEBUG] transformed X214Me.SPC -> X214ME.SPC
[sigmove 11:45:21 DEBUG] transformed X214Mf.SPC -> X214MF.SPC
[Status 11:45:21 INFO] data for X214 transferred to science data processing
[Tidy 11:45:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:45:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:45:21 INFO] resetting WatchDogTimer
[Status 11:45:21 INFO] Starting Set [AERI set: name Y214, 6 scans, 0 angle, D16300 command]
[Ingest 11:45:21 INFO] Sending XML status message
[Status 11:45:21 INFO] Mirror angle: 0
[Mirror 11:45:22 INFO] rotating to position Y
[Status 11:45:22 INFO] .SET file for ACQ96 ready
[Ingest 11:45:22 INFO] Starting acquisition
[Status 11:45:22 INFO] reading housekeeping
[Status 11:45:40 INFO] acquire complete
[Status 11:45:41 INFO] writing housekeeping
[Sequencer 11:45:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:45:41 INFO] incremented Y scene to 214 completed views
[Sequencer 11:45:41 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:45:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:45:41 INFO] incremented to [AERI set: name Z214, 6 scans, 0 angle, D16300 command] set
[sigmove 11:45:41 INFO] Y214.SIG(18)
[sigmove 11:45:41 DEBUG] transformed Y214Ma.SPC -> Y214MA.SPC
[sigmove 11:45:41 DEBUG] transformed Y214Mb.SPC -> Y214MB.SPC
[sigmove 11:45:41 DEBUG] transformed Y214Mc.SPC -> Y214MC.SPC
[sigmove 11:45:41 DEBUG] transformed Y214Md.SPC -> Y214MD.SPC
[sigmove 11:45:41 DEBUG] transformed Y214Me.SPC -> Y214ME.SPC
[sigmove 11:45:41 DEBUG] transformed Y214Mf.SPC -> Y214MF.SPC
[Status 11:45:41 INFO] data for Y214 transferred to science data processing
[Tidy 11:45:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:45:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:45:41 INFO] resetting WatchDogTimer
[Status 11:45:41 INFO] Starting Set [AERI set: name Z214, 6 scans, 0 angle, D16300 command]
[Ingest 11:45:41 INFO] Sending XML status message
[Status 11:45:41 INFO] Mirror angle: 0
[Mirror 11:45:42 INFO] rotating to position Z
[Status 11:45:42 INFO] .SET file for ACQ96 ready
[Ingest 11:45:42 INFO] Starting acquisition
[Status 11:45:43 INFO] reading housekeeping
[Status 11:46:00 INFO] acquire complete
[Status 11:46:01 INFO] writing housekeeping
[Sequencer 11:46:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:46:01 INFO] incremented Z scene to 214 completed views
[Sequencer 11:46:01 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:46:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:46:01 INFO] incremented to [AERI set: name H215, 6 scans, 60 angle, D22500 command] set
[sigmove 11:46:01 INFO] Z214.SIG(18)
[sigmove 11:46:01 DEBUG] transformed Z214Ma.SPC -> Z214MA.SPC
[sigmove 11:46:01 DEBUG] transformed Z214Mb.SPC -> Z214MB.SPC
[sigmove 11:46:01 DEBUG] transformed Z214Mc.SPC -> Z214MC.SPC
[sigmove 11:46:01 DEBUG] transformed Z214Md.SPC -> Z214MD.SPC
[sigmove 11:46:01 DEBUG] transformed Z214Me.SPC -> Z214ME.SPC
[sigmove 11:46:01 DEBUG] transformed Z214Mf.SPC -> Z214MF.SPC
[Status 11:46:01 INFO] data for Z214 transferred to science data processing
[Tidy 11:46:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:46:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:46:01 INFO] resetting WatchDogTimer
[Status 11:46:02 INFO] Starting Set [AERI set: name H215, 6 scans, 60 angle, D22500 command]
[Ingest 11:46:02 INFO] Sending XML status message
[Status 11:46:02 INFO] Mirror angle: 60
[Mirror 11:46:02 INFO] rotating to position H
[Status 11:46:03 INFO] .SET file for ACQ96 ready
[Ingest 11:46:03 INFO] Starting acquisition
[Status 11:46:03 INFO] reading housekeeping
[Status 11:46:21 INFO] acquire complete
[Status 11:46:22 INFO] writing housekeeping
[Sequencer 11:46:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:46:22 INFO] incremented H scene to 215 completed views
[Sequencer 11:46:22 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:46:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:46:22 INFO] incremented to [AERI set: name A215, 6 scans, 120 angle, D28300 command] set
[sigmove 11:46:22 INFO] H215.SIG(18)
[sigmove 11:46:22 DEBUG] transformed H215Ma.SPC -> H215MA.SPC
[sigmove 11:46:22 DEBUG] transformed H215Mb.SPC -> H215MB.SPC
[sigmove 11:46:22 DEBUG] transformed H215Mc.SPC -> H215MC.SPC
[sigmove 11:46:22 DEBUG] transformed H215Md.SPC -> H215MD.SPC
[sigmove 11:46:22 DEBUG] transformed H215Me.SPC -> H215ME.SPC
[sigmove 11:46:22 DEBUG] transformed H215Mf.SPC -> H215MF.SPC
[Status 11:46:22 INFO] data for H215 transferred to science data processing
[Tidy 11:46:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:46:22 INFO] A213.FIN(19),H213.FIN(19),S213.FIN(19),T213.FIN(19),U213.FIN(19),V213.FIN(19),W213.FIN(19),X213.FIN(19),Y213.FIN(19),Z213.FIN(19),A214.FIN(19),H214.FIN(19),S214.FIN(19),T214.FIN(19),U214.FIN(19),V214.FIN(19),W214.FIN(19),X214.FIN(19),Y214.FIN(19),Z214.FIN(19)
[sigmove 11:46:22 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:46:22 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:46:25 DEBUG] done zipping
[WatchDog 11:46:26 INFO] resetting WatchDogTimer
[Status 11:46:26 INFO] Starting Set [AERI set: name A215, 6 scans, 120 angle, D28300 command]
[Ingest 11:46:26 INFO] Sending XML status message
[Status 11:46:26 INFO] Mirror angle: 120
[Mirror 11:46:26 INFO] rotating to position A
[Status 11:46:27 INFO] .SET file for ACQ96 ready
[Ingest 11:46:27 INFO] Starting acquisition
[Status 11:46:28 INFO] reading housekeeping
[Status 11:46:45 INFO] acquire complete
[Status 11:46:46 INFO] writing housekeeping
[Sequencer 11:46:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:46:46 INFO] incremented A scene to 215 completed views
[Sequencer 11:46:46 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:46:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:46:46 INFO] incremented to [AERI set: name S215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:46:46 INFO] A215.SIG(18)
[sigmove 11:46:46 DEBUG] transformed A215Ma.SPC -> A215MA.SPC
[sigmove 11:46:46 DEBUG] transformed A215Mb.SPC -> A215MB.SPC
[sigmove 11:46:46 DEBUG] transformed A215Mc.SPC -> A215MC.SPC
[sigmove 11:46:46 DEBUG] transformed A215Md.SPC -> A215MD.SPC
[sigmove 11:46:46 DEBUG] transformed A215Me.SPC -> A215ME.SPC
[sigmove 11:46:46 DEBUG] transformed A215Mf.SPC -> A215MF.SPC
[Status 11:46:46 INFO] data for A215 transferred to science data processing
[Tidy 11:46:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:46:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:46:46 INFO] resetting WatchDogTimer
[Status 11:46:46 INFO] Starting Set [AERI set: name S215, 6 scans, 0 angle, D16300 command]
[Ingest 11:46:47 INFO] Sending XML status message
[Status 11:46:47 INFO] Mirror angle: 0
[Mirror 11:46:47 INFO] rotating to position S
[Status 11:46:48 INFO] .SET file for ACQ96 ready
[Ingest 11:46:48 INFO] Starting acquisition
[Status 11:46:49 INFO] reading housekeeping
[Status 11:47:07 INFO] acquire complete
[Status 11:47:07 INFO] writing housekeeping
[Sequencer 11:47:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:47:07 INFO] incremented S scene to 215 completed views
[Sequencer 11:47:07 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:47:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:47:07 INFO] incremented to [AERI set: name T215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:47:07 INFO] S215.SIG(18)
[sigmove 11:47:08 DEBUG] transformed S215Ma.SPC -> S215MA.SPC
[sigmove 11:47:08 DEBUG] transformed S215Mb.SPC -> S215MB.SPC
[sigmove 11:47:08 DEBUG] transformed S215Mc.SPC -> S215MC.SPC
[sigmove 11:47:08 DEBUG] transformed S215Md.SPC -> S215MD.SPC
[sigmove 11:47:08 DEBUG] transformed S215Me.SPC -> S215ME.SPC
[sigmove 11:47:08 DEBUG] transformed S215Mf.SPC -> S215MF.SPC
[Status 11:47:08 INFO] data for S215 transferred to science data processing
[Tidy 11:47:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:47:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:47:08 INFO] resetting WatchDogTimer
[Status 11:47:08 INFO] Starting Set [AERI set: name T215, 6 scans, 0 angle, D16300 command]
[Ingest 11:47:08 INFO] Sending XML status message
[Status 11:47:08 INFO] Mirror angle: 0
[Mirror 11:47:08 INFO] rotating to position T
[Status 11:47:09 INFO] .SET file for ACQ96 ready
[Ingest 11:47:09 INFO] Starting acquisition
[Status 11:47:09 INFO] reading housekeeping
[Status 11:47:27 INFO] acquire complete
[Status 11:47:28 INFO] writing housekeeping
[Sequencer 11:47:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:47:28 INFO] incremented T scene to 215 completed views
[Sequencer 11:47:28 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:47:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:47:28 INFO] incremented to [AERI set: name U215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:47:28 INFO] T215.SIG(18)
[sigmove 11:47:28 DEBUG] transformed T215Ma.SPC -> T215MA.SPC
[sigmove 11:47:28 DEBUG] transformed T215Mb.SPC -> T215MB.SPC
[sigmove 11:47:28 DEBUG] transformed T215Mc.SPC -> T215MC.SPC
[sigmove 11:47:28 DEBUG] transformed T215Md.SPC -> T215MD.SPC
[sigmove 11:47:28 DEBUG] transformed T215Me.SPC -> T215ME.SPC
[sigmove 11:47:28 DEBUG] transformed T215Mf.SPC -> T215MF.SPC
[Status 11:47:28 INFO] data for T215 transferred to science data processing
[Tidy 11:47:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:47:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:47:28 INFO] resetting WatchDogTimer
[Status 11:47:28 INFO] Starting Set [AERI set: name U215, 6 scans, 0 angle, D16300 command]
[Ingest 11:47:28 INFO] Sending XML status message
[Status 11:47:28 INFO] Mirror angle: 0
[Mirror 11:47:28 INFO] rotating to position U
[Status 11:47:29 INFO] .SET file for ACQ96 ready
[Ingest 11:47:29 INFO] Starting acquisition
[Status 11:47:29 INFO] reading housekeeping
[Status 11:47:47 INFO] acquire complete
[Status 11:47:48 INFO] writing housekeeping
[Sequencer 11:47:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:47:48 INFO] incremented U scene to 215 completed views
[Sequencer 11:47:48 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:47:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:47:48 INFO] incremented to [AERI set: name V215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:47:48 INFO] U215.SIG(18)
[sigmove 11:47:48 DEBUG] transformed U215Ma.SPC -> U215MA.SPC
[sigmove 11:47:48 DEBUG] transformed U215Mb.SPC -> U215MB.SPC
[sigmove 11:47:48 DEBUG] transformed U215Mc.SPC -> U215MC.SPC
[sigmove 11:47:48 DEBUG] transformed U215Md.SPC -> U215MD.SPC
[sigmove 11:47:48 DEBUG] transformed U215Me.SPC -> U215ME.SPC
[sigmove 11:47:48 DEBUG] transformed U215Mf.SPC -> U215MF.SPC
[Status 11:47:48 INFO] data for U215 transferred to science data processing
[Tidy 11:47:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:47:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:47:48 INFO] resetting WatchDogTimer
[Status 11:47:48 INFO] Starting Set [AERI set: name V215, 6 scans, 0 angle, D16300 command]
[Ingest 11:47:48 INFO] Sending XML status message
[Status 11:47:48 INFO] Mirror angle: 0
[Mirror 11:47:49 INFO] rotating to position V
[Status 11:47:49 INFO] .SET file for ACQ96 ready
[Ingest 11:47:49 INFO] Starting acquisition
[Status 11:47:49 INFO] reading housekeeping
[Status 11:48:07 INFO] acquire complete
[Status 11:48:08 INFO] writing housekeeping
[Sequencer 11:48:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:48:08 INFO] incremented V scene to 215 completed views
[Sequencer 11:48:08 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:48:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:48:08 INFO] incremented to [AERI set: name W215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:48:08 INFO] V215.SIG(18)
[sigmove 11:48:08 DEBUG] transformed V215Ma.SPC -> V215MA.SPC
[sigmove 11:48:08 DEBUG] transformed V215Mb.SPC -> V215MB.SPC
[sigmove 11:48:08 DEBUG] transformed V215Mc.SPC -> V215MC.SPC
[sigmove 11:48:08 DEBUG] transformed V215Md.SPC -> V215MD.SPC
[sigmove 11:48:08 DEBUG] transformed V215Me.SPC -> V215ME.SPC
[sigmove 11:48:08 DEBUG] transformed V215Mf.SPC -> V215MF.SPC
[Status 11:48:08 INFO] data for V215 transferred to science data processing
[Tidy 11:48:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:48:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:48:08 INFO] resetting WatchDogTimer
[Status 11:48:08 INFO] Starting Set [AERI set: name W215, 6 scans, 0 angle, D16300 command]
[Ingest 11:48:08 INFO] Sending XML status message
[Status 11:48:08 INFO] Mirror angle: 0
[Mirror 11:48:09 INFO] rotating to position W
[Status 11:48:09 INFO] .SET file for ACQ96 ready
[Ingest 11:48:09 INFO] Starting acquisition
[Status 11:48:10 INFO] reading housekeeping
[Status 11:48:27 INFO] acquire complete
[Status 11:48:28 INFO] writing housekeeping
[Sequencer 11:48:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:48:28 INFO] incremented W scene to 215 completed views
[Sequencer 11:48:28 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:48:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:48:28 INFO] incremented to [AERI set: name X215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:48:28 INFO] W215.SIG(18)
[sigmove 11:48:28 DEBUG] transformed W215Ma.SPC -> W215MA.SPC
[sigmove 11:48:28 DEBUG] transformed W215Mb.SPC -> W215MB.SPC
[sigmove 11:48:28 DEBUG] transformed W215Mc.SPC -> W215MC.SPC
[sigmove 11:48:28 DEBUG] transformed W215Md.SPC -> W215MD.SPC
[sigmove 11:48:28 DEBUG] transformed W215Me.SPC -> W215ME.SPC
[sigmove 11:48:28 DEBUG] transformed W215Mf.SPC -> W215MF.SPC
[Status 11:48:28 INFO] data for W215 transferred to science data processing
[Tidy 11:48:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:48:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:48:28 INFO] resetting WatchDogTimer
[Status 11:48:29 INFO] Starting Set [AERI set: name X215, 6 scans, 0 angle, D16300 command]
[Ingest 11:48:29 INFO] Sending XML status message
[Status 11:48:29 INFO] Mirror angle: 0
[Mirror 11:48:29 INFO] rotating to position X
[Status 11:48:29 INFO] .SET file for ACQ96 ready
[Ingest 11:48:30 INFO] Starting acquisition
[Status 11:48:30 INFO] reading housekeeping
[Status 11:48:48 INFO] acquire complete
[Status 11:48:48 INFO] writing housekeeping
[Sequencer 11:48:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:48:48 INFO] incremented X scene to 215 completed views
[Sequencer 11:48:48 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:48:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:48:48 INFO] incremented to [AERI set: name Y215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:48:48 INFO] X215.SIG(18)
[sigmove 11:48:48 DEBUG] transformed X215Ma.SPC -> X215MA.SPC
[sigmove 11:48:48 DEBUG] transformed X215Mb.SPC -> X215MB.SPC
[sigmove 11:48:48 DEBUG] transformed X215Mc.SPC -> X215MC.SPC
[sigmove 11:48:48 DEBUG] transformed X215Md.SPC -> X215MD.SPC
[sigmove 11:48:48 DEBUG] transformed X215Me.SPC -> X215ME.SPC
[sigmove 11:48:49 DEBUG] transformed X215Mf.SPC -> X215MF.SPC
[Status 11:48:49 INFO] data for X215 transferred to science data processing
[Tidy 11:48:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:48:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:48:49 INFO] resetting WatchDogTimer
[Status 11:48:49 INFO] Starting Set [AERI set: name Y215, 6 scans, 0 angle, D16300 command]
[Ingest 11:48:49 INFO] Sending XML status message
[Status 11:48:49 INFO] Mirror angle: 0
[Mirror 11:48:49 INFO] rotating to position Y
[Status 11:48:50 INFO] .SET file for ACQ96 ready
[Ingest 11:48:50 INFO] Starting acquisition
[Status 11:48:50 INFO] reading housekeeping
[Status 11:49:08 INFO] acquire complete
[Status 11:49:09 INFO] writing housekeeping
[Sequencer 11:49:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:49:09 INFO] incremented Y scene to 215 completed views
[Sequencer 11:49:09 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:49:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:49:09 INFO] incremented to [AERI set: name Z215, 6 scans, 0 angle, D16300 command] set
[sigmove 11:49:09 INFO] Y215.SIG(18)
[sigmove 11:49:09 DEBUG] transformed Y215Ma.SPC -> Y215MA.SPC
[sigmove 11:49:09 DEBUG] transformed Y215Mb.SPC -> Y215MB.SPC
[sigmove 11:49:09 DEBUG] transformed Y215Mc.SPC -> Y215MC.SPC
[sigmove 11:49:09 DEBUG] transformed Y215Md.SPC -> Y215MD.SPC
[sigmove 11:49:09 DEBUG] transformed Y215Me.SPC -> Y215ME.SPC
[sigmove 11:49:09 DEBUG] transformed Y215Mf.SPC -> Y215MF.SPC
[Status 11:49:09 INFO] data for Y215 transferred to science data processing
[Tidy 11:49:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:49:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:49:09 INFO] resetting WatchDogTimer
[Status 11:49:09 INFO] Starting Set [AERI set: name Z215, 6 scans, 0 angle, D16300 command]
[Ingest 11:49:09 INFO] Sending XML status message
[Status 11:49:09 INFO] Mirror angle: 0
[Mirror 11:49:09 INFO] rotating to position Z
[Status 11:49:10 INFO] .SET file for ACQ96 ready
[Ingest 11:49:10 INFO] Starting acquisition
[Status 11:49:10 INFO] reading housekeeping
[Status 11:49:28 INFO] acquire complete
[Status 11:49:29 INFO] writing housekeeping
[Sequencer 11:49:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:49:29 INFO] incremented Z scene to 215 completed views
[Sequencer 11:49:29 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:49:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:49:29 INFO] incremented to [AERI set: name A216, 6 scans, 120 angle, D28300 command] set
[sigmove 11:49:29 INFO] Z215.SIG(18)
[sigmove 11:49:29 DEBUG] transformed Z215Ma.SPC -> Z215MA.SPC
[sigmove 11:49:29 DEBUG] transformed Z215Mb.SPC -> Z215MB.SPC
[sigmove 11:49:29 DEBUG] transformed Z215Mc.SPC -> Z215MC.SPC
[sigmove 11:49:29 DEBUG] transformed Z215Md.SPC -> Z215MD.SPC
[sigmove 11:49:29 DEBUG] transformed Z215Me.SPC -> Z215ME.SPC
[sigmove 11:49:29 DEBUG] transformed Z215Mf.SPC -> Z215MF.SPC
[Status 11:49:29 INFO] data for Z215 transferred to science data processing
[Tidy 11:49:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:49:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:49:29 INFO] resetting WatchDogTimer
[Status 11:49:29 INFO] Starting Set [AERI set: name A216, 6 scans, 120 angle, D28300 command]
[Ingest 11:49:29 INFO] Sending XML status message
[Status 11:49:29 INFO] Mirror angle: 120
[Mirror 11:49:29 INFO] rotating to position A
[Status 11:49:31 INFO] .SET file for ACQ96 ready
[Ingest 11:49:31 INFO] Starting acquisition
[Status 11:49:31 INFO] reading housekeeping
[Status 11:49:49 INFO] acquire complete
[Status 11:49:50 INFO] writing housekeeping
[Sequencer 11:49:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:49:50 INFO] incremented A scene to 216 completed views
[Sequencer 11:49:50 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:49:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:49:50 INFO] incremented to [AERI set: name H216, 6 scans, 60 angle, D22500 command] set
[sigmove 11:49:50 INFO] A216.SIG(18)
[sigmove 11:49:50 DEBUG] transformed A216Ma.SPC -> A216MA.SPC
[sigmove 11:49:50 DEBUG] transformed A216Mb.SPC -> A216MB.SPC
[sigmove 11:49:50 DEBUG] transformed A216Mc.SPC -> A216MC.SPC
[sigmove 11:49:50 DEBUG] transformed A216Md.SPC -> A216MD.SPC
[sigmove 11:49:50 DEBUG] transformed A216Me.SPC -> A216ME.SPC
[sigmove 11:49:50 DEBUG] transformed A216Mf.SPC -> A216MF.SPC
[Status 11:49:50 INFO] data for A216 transferred to science data processing
[Tidy 11:49:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:49:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:49:50 INFO] resetting WatchDogTimer
[Status 11:49:50 INFO] Starting Set [AERI set: name H216, 6 scans, 60 angle, D22500 command]
[Ingest 11:49:50 INFO] Sending XML status message
[Status 11:49:50 INFO] Mirror angle: 60
[Mirror 11:49:51 INFO] rotating to position H
[Status 11:49:52 INFO] .SET file for ACQ96 ready
[Ingest 11:49:52 INFO] Starting acquisition
[Status 11:49:52 INFO] reading housekeeping
[Status 11:50:10 INFO] acquire complete
[Status 11:50:10 INFO] writing housekeeping
[Sequencer 11:50:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:50:10 INFO] incremented H scene to 216 completed views
[Sequencer 11:50:10 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:50:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:50:10 INFO] incremented to [AERI set: name S216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:50:10 INFO] H216.SIG(18)
[sigmove 11:50:10 DEBUG] transformed H216Ma.SPC -> H216MA.SPC
[sigmove 11:50:10 DEBUG] transformed H216Mb.SPC -> H216MB.SPC
[sigmove 11:50:10 DEBUG] transformed H216Mc.SPC -> H216MC.SPC
[sigmove 11:50:10 DEBUG] transformed H216Md.SPC -> H216MD.SPC
[sigmove 11:50:10 DEBUG] transformed H216Me.SPC -> H216ME.SPC
[sigmove 11:50:10 DEBUG] transformed H216Mf.SPC -> H216MF.SPC
[Status 11:50:10 INFO] data for H216 transferred to science data processing
[Tidy 11:50:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:50:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:50:10 INFO] resetting WatchDogTimer
[Status 11:50:11 INFO] Starting Set [AERI set: name S216, 6 scans, 0 angle, D16300 command]
[Ingest 11:50:11 INFO] Sending XML status message
[Status 11:50:11 INFO] Mirror angle: 0
[Mirror 11:50:11 INFO] rotating to position S
[Status 11:50:12 INFO] .SET file for ACQ96 ready
[Ingest 11:50:12 INFO] Starting acquisition
[Status 11:50:12 INFO] reading housekeeping
[Status 11:50:30 INFO] acquire complete
[Status 11:50:31 INFO] writing housekeeping
[Sequencer 11:50:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:50:31 INFO] incremented S scene to 216 completed views
[Sequencer 11:50:31 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:50:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:50:31 INFO] incremented to [AERI set: name T216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:50:31 INFO] S216.SIG(18)
[sigmove 11:50:31 DEBUG] transformed S216Ma.SPC -> S216MA.SPC
[sigmove 11:50:31 DEBUG] transformed S216Mb.SPC -> S216MB.SPC
[sigmove 11:50:31 DEBUG] transformed S216Mc.SPC -> S216MC.SPC
[sigmove 11:50:31 DEBUG] transformed S216Md.SPC -> S216MD.SPC
[sigmove 11:50:31 DEBUG] transformed S216Me.SPC -> S216ME.SPC
[sigmove 11:50:31 DEBUG] transformed S216Mf.SPC -> S216MF.SPC
[Status 11:50:31 INFO] data for S216 transferred to science data processing
[Tidy 11:50:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:50:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:50:31 INFO] resetting WatchDogTimer
[Status 11:50:31 INFO] Starting Set [AERI set: name T216, 6 scans, 0 angle, D16300 command]
[Ingest 11:50:31 INFO] Sending XML status message
[Status 11:50:31 INFO] Mirror angle: 0
[Mirror 11:50:31 INFO] rotating to position T
[Status 11:50:32 INFO] .SET file for ACQ96 ready
[Ingest 11:50:32 INFO] Starting acquisition
[Status 11:50:32 INFO] reading housekeeping
[Status 11:50:50 INFO] acquire complete
[Status 11:50:51 INFO] writing housekeeping
[Sequencer 11:50:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:50:51 INFO] incremented T scene to 216 completed views
[Sequencer 11:50:51 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:50:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:50:51 INFO] incremented to [AERI set: name U216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:50:51 INFO] T216.SIG(18)
[sigmove 11:50:51 DEBUG] transformed T216Ma.SPC -> T216MA.SPC
[sigmove 11:50:51 DEBUG] transformed T216Mb.SPC -> T216MB.SPC
[sigmove 11:50:51 DEBUG] transformed T216Mc.SPC -> T216MC.SPC
[sigmove 11:50:51 DEBUG] transformed T216Md.SPC -> T216MD.SPC
[sigmove 11:50:51 DEBUG] transformed T216Me.SPC -> T216ME.SPC
[sigmove 11:50:51 DEBUG] transformed T216Mf.SPC -> T216MF.SPC
[Status 11:50:51 INFO] data for T216 transferred to science data processing
[Tidy 11:50:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:50:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:50:51 INFO] resetting WatchDogTimer
[Status 11:50:51 INFO] Starting Set [AERI set: name U216, 6 scans, 0 angle, D16300 command]
[Ingest 11:50:51 INFO] Sending XML status message
[Status 11:50:51 INFO] Mirror angle: 0
[Mirror 11:50:51 INFO] rotating to position U
[Status 11:50:52 INFO] .SET file for ACQ96 ready
[Ingest 11:50:52 INFO] Starting acquisition
[Status 11:50:52 INFO] reading housekeeping
[Status 11:51:10 INFO] acquire complete
[Status 11:51:11 INFO] writing housekeeping
[Sequencer 11:51:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:51:11 INFO] incremented U scene to 216 completed views
[Sequencer 11:51:11 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:51:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:51:11 INFO] incremented to [AERI set: name V216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:51:11 INFO] U216.SIG(18)
[sigmove 11:51:11 DEBUG] transformed U216Ma.SPC -> U216MA.SPC
[sigmove 11:51:11 DEBUG] transformed U216Mb.SPC -> U216MB.SPC
[sigmove 11:51:11 DEBUG] transformed U216Mc.SPC -> U216MC.SPC
[sigmove 11:51:11 DEBUG] transformed U216Md.SPC -> U216MD.SPC
[sigmove 11:51:11 DEBUG] transformed U216Me.SPC -> U216ME.SPC
[sigmove 11:51:11 DEBUG] transformed U216Mf.SPC -> U216MF.SPC
[Status 11:51:11 INFO] data for U216 transferred to science data processing
[Tidy 11:51:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:51:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:51:11 INFO] resetting WatchDogTimer
[Status 11:51:11 INFO] Starting Set [AERI set: name V216, 6 scans, 0 angle, D16300 command]
[Ingest 11:51:11 INFO] Sending XML status message
[Status 11:51:11 INFO] Mirror angle: 0
[Mirror 11:51:12 INFO] rotating to position V
[Status 11:51:12 INFO] .SET file for ACQ96 ready
[Ingest 11:51:13 INFO] Starting acquisition
[Status 11:51:13 INFO] reading housekeeping
[Status 11:51:30 INFO] acquire complete
[Status 11:51:31 INFO] writing housekeeping
[Sequencer 11:51:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:51:31 INFO] incremented V scene to 216 completed views
[Sequencer 11:51:31 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:51:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:51:31 INFO] incremented to [AERI set: name W216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:51:31 INFO] V216.SIG(18)
[sigmove 11:51:31 DEBUG] transformed V216Ma.SPC -> V216MA.SPC
[sigmove 11:51:31 DEBUG] transformed V216Mb.SPC -> V216MB.SPC
[sigmove 11:51:31 DEBUG] transformed V216Mc.SPC -> V216MC.SPC
[sigmove 11:51:31 DEBUG] transformed V216Md.SPC -> V216MD.SPC
[sigmove 11:51:31 DEBUG] transformed V216Me.SPC -> V216ME.SPC
[sigmove 11:51:31 DEBUG] transformed V216Mf.SPC -> V216MF.SPC
[Status 11:51:31 INFO] data for V216 transferred to science data processing
[Tidy 11:51:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:51:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:51:31 INFO] resetting WatchDogTimer
[Status 11:51:31 INFO] Starting Set [AERI set: name W216, 6 scans, 0 angle, D16300 command]
[Ingest 11:51:31 INFO] Sending XML status message
[Status 11:51:31 INFO] Mirror angle: 0
[Mirror 11:51:32 INFO] rotating to position W
[Status 11:51:32 INFO] .SET file for ACQ96 ready
[Ingest 11:51:32 INFO] Starting acquisition
[Status 11:51:33 INFO] reading housekeeping
[Status 11:51:51 INFO] acquire complete
[Status 11:51:51 INFO] writing housekeeping
[Sequencer 11:51:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:51:51 INFO] incremented W scene to 216 completed views
[Sequencer 11:51:51 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:51:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:51:51 INFO] incremented to [AERI set: name X216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:51:51 INFO] W216.SIG(18)
[sigmove 11:51:51 DEBUG] transformed W216Ma.SPC -> W216MA.SPC
[sigmove 11:51:51 DEBUG] transformed W216Mb.SPC -> W216MB.SPC
[sigmove 11:51:51 DEBUG] transformed W216Mc.SPC -> W216MC.SPC
[sigmove 11:51:51 DEBUG] transformed W216Md.SPC -> W216MD.SPC
[sigmove 11:51:51 DEBUG] transformed W216Me.SPC -> W216ME.SPC
[sigmove 11:51:51 DEBUG] transformed W216Mf.SPC -> W216MF.SPC
[Status 11:51:51 INFO] data for W216 transferred to science data processing
[Tidy 11:51:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:51:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:51:51 INFO] resetting WatchDogTimer
[Status 11:51:52 INFO] Starting Set [AERI set: name X216, 6 scans, 0 angle, D16300 command]
[Ingest 11:51:52 INFO] Sending XML status message
[Status 11:51:52 INFO] Mirror angle: 0
[Mirror 11:51:52 INFO] rotating to position X
[Status 11:51:52 INFO] .SET file for ACQ96 ready
[Ingest 11:51:53 INFO] Starting acquisition
[Status 11:51:53 INFO] reading housekeeping
[Status 11:52:11 INFO] acquire complete
[Status 11:52:12 INFO] writing housekeeping
[Sequencer 11:52:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:52:12 INFO] incremented X scene to 216 completed views
[Sequencer 11:52:12 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:52:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:52:12 INFO] incremented to [AERI set: name Y216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:52:12 INFO] X216.SIG(18)
[sigmove 11:52:12 DEBUG] transformed X216Ma.SPC -> X216MA.SPC
[sigmove 11:52:12 DEBUG] transformed X216Mb.SPC -> X216MB.SPC
[sigmove 11:52:12 DEBUG] transformed X216Mc.SPC -> X216MC.SPC
[sigmove 11:52:12 DEBUG] transformed X216Md.SPC -> X216MD.SPC
[sigmove 11:52:12 DEBUG] transformed X216Me.SPC -> X216ME.SPC
[sigmove 11:52:12 DEBUG] transformed X216Mf.SPC -> X216MF.SPC
[Status 11:52:12 INFO] data for X216 transferred to science data processing
[Tidy 11:52:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:52:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:52:12 INFO] resetting WatchDogTimer
[Status 11:52:12 INFO] Starting Set [AERI set: name Y216, 6 scans, 0 angle, D16300 command]
[Ingest 11:52:12 INFO] Sending XML status message
[Status 11:52:12 INFO] Mirror angle: 0
[Mirror 11:52:12 INFO] rotating to position Y
[Status 11:52:13 INFO] .SET file for ACQ96 ready
[Ingest 11:52:13 INFO] Starting acquisition
[Status 11:52:13 INFO] reading housekeeping
[Status 11:52:31 INFO] acquire complete
[Status 11:52:32 INFO] writing housekeeping
[Sequencer 11:52:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:52:32 INFO] incremented Y scene to 216 completed views
[Sequencer 11:52:32 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:52:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:52:32 INFO] incremented to [AERI set: name Z216, 6 scans, 0 angle, D16300 command] set
[sigmove 11:52:32 INFO] Y216.SIG(18)
[sigmove 11:52:32 DEBUG] transformed Y216Ma.SPC -> Y216MA.SPC
[sigmove 11:52:32 DEBUG] transformed Y216Mb.SPC -> Y216MB.SPC
[sigmove 11:52:32 DEBUG] transformed Y216Mc.SPC -> Y216MC.SPC
[sigmove 11:52:32 DEBUG] transformed Y216Md.SPC -> Y216MD.SPC
[sigmove 11:52:32 DEBUG] transformed Y216Me.SPC -> Y216ME.SPC
[sigmove 11:52:32 DEBUG] transformed Y216Mf.SPC -> Y216MF.SPC
[Status 11:52:32 INFO] data for Y216 transferred to science data processing
[Tidy 11:52:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:52:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:52:32 INFO] resetting WatchDogTimer
[Status 11:52:32 INFO] Starting Set [AERI set: name Z216, 6 scans, 0 angle, D16300 command]
[Ingest 11:52:32 INFO] Sending XML status message
[Status 11:52:32 INFO] Mirror angle: 0
[Mirror 11:52:32 INFO] rotating to position Z
[Status 11:52:33 INFO] .SET file for ACQ96 ready
[Ingest 11:52:33 INFO] Starting acquisition
[Status 11:52:33 INFO] reading housekeeping
[Status 11:52:51 INFO] acquire complete
[Status 11:52:52 INFO] writing housekeeping
[Sequencer 11:52:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:52:52 INFO] incremented Z scene to 216 completed views
[Sequencer 11:52:52 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:52:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:52:52 INFO] incremented to [AERI set: name H217, 6 scans, 60 angle, D22500 command] set
[sigmove 11:52:52 INFO] Z216.SIG(18)
[sigmove 11:52:52 DEBUG] transformed Z216Ma.SPC -> Z216MA.SPC
[sigmove 11:52:52 DEBUG] transformed Z216Mb.SPC -> Z216MB.SPC
[sigmove 11:52:52 DEBUG] transformed Z216Mc.SPC -> Z216MC.SPC
[sigmove 11:52:52 DEBUG] transformed Z216Md.SPC -> Z216MD.SPC
[sigmove 11:52:52 DEBUG] transformed Z216Me.SPC -> Z216ME.SPC
[sigmove 11:52:52 DEBUG] transformed Z216Mf.SPC -> Z216MF.SPC
[Status 11:52:52 INFO] data for Z216 transferred to science data processing
[Tidy 11:52:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:52:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:52:52 INFO] resetting WatchDogTimer
[Status 11:52:52 INFO] Starting Set [AERI set: name H217, 6 scans, 60 angle, D22500 command]
[Ingest 11:52:52 INFO] Sending XML status message
[Status 11:52:52 INFO] Mirror angle: 60
[Mirror 11:52:53 INFO] rotating to position H
[Status 11:52:54 INFO] .SET file for ACQ96 ready
[Ingest 11:52:54 INFO] Starting acquisition
[Status 11:52:54 INFO] reading housekeeping
[Status 11:53:11 INFO] acquire complete
[Status 11:53:12 INFO] writing housekeeping
[Sequencer 11:53:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:53:12 INFO] incremented H scene to 217 completed views
[Sequencer 11:53:12 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:53:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:53:12 INFO] incremented to [AERI set: name A217, 6 scans, 120 angle, D28300 command] set
[sigmove 11:53:12 INFO] H217.SIG(18)
[sigmove 11:53:12 DEBUG] transformed H217Ma.SPC -> H217MA.SPC
[sigmove 11:53:12 DEBUG] transformed H217Mb.SPC -> H217MB.SPC
[sigmove 11:53:12 DEBUG] transformed H217Mc.SPC -> H217MC.SPC
[sigmove 11:53:12 DEBUG] transformed H217Md.SPC -> H217MD.SPC
[sigmove 11:53:12 DEBUG] transformed H217Me.SPC -> H217ME.SPC
[sigmove 11:53:12 DEBUG] transformed H217Mf.SPC -> H217MF.SPC
[Status 11:53:12 INFO] data for H217 transferred to science data processing
[Tidy 11:53:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:53:12 INFO] A215.FIN(19),H215.FIN(19),S215.FIN(19),T215.FIN(19),U215.FIN(19),V215.FIN(19),W215.FIN(19),X215.FIN(19),Y215.FIN(19),Z215.FIN(19),A216.FIN(19),H216.FIN(19),S216.FIN(19),T216.FIN(19),U216.FIN(19),V216.FIN(19),W216.FIN(19),X216.FIN(19),Y216.FIN(19),Z216.FIN(19)
[sigmove 11:53:12 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:53:12 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 11:53:16 DEBUG] done zipping
[WatchDog 11:53:16 INFO] resetting WatchDogTimer
[Status 11:53:17 INFO] Starting Set [AERI set: name A217, 6 scans, 120 angle, D28300 command]
[Ingest 11:53:17 INFO] Sending XML status message
[Status 11:53:17 INFO] Mirror angle: 120
[Mirror 11:53:17 INFO] rotating to position A
[Status 11:53:18 INFO] .SET file for ACQ96 ready
[Ingest 11:53:18 INFO] Starting acquisition
[Status 11:53:18 INFO] reading housekeeping
[Status 11:53:36 INFO] acquire complete
[Status 11:53:37 INFO] writing housekeeping
[Sequencer 11:53:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:53:37 INFO] incremented A scene to 217 completed views
[Sequencer 11:53:37 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:53:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:53:37 INFO] incremented to [AERI set: name S217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:53:37 INFO] A217.SIG(18)
[sigmove 11:53:37 DEBUG] transformed A217Ma.SPC -> A217MA.SPC
[sigmove 11:53:37 DEBUG] transformed A217Mb.SPC -> A217MB.SPC
[sigmove 11:53:37 DEBUG] transformed A217Mc.SPC -> A217MC.SPC
[sigmove 11:53:37 DEBUG] transformed A217Md.SPC -> A217MD.SPC
[sigmove 11:53:37 DEBUG] transformed A217Me.SPC -> A217ME.SPC
[sigmove 11:53:37 DEBUG] transformed A217Mf.SPC -> A217MF.SPC
[Status 11:53:37 INFO] data for A217 transferred to science data processing
[Tidy 11:53:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:53:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:53:37 INFO] resetting WatchDogTimer
[Status 11:53:37 INFO] Starting Set [AERI set: name S217, 6 scans, 0 angle, D16300 command]
[Ingest 11:53:37 INFO] Sending XML status message
[Status 11:53:37 INFO] Mirror angle: 0
[Mirror 11:53:37 INFO] rotating to position S
[Status 11:53:39 INFO] .SET file for ACQ96 ready
[Ingest 11:53:39 INFO] Starting acquisition
[Status 11:53:39 INFO] reading housekeeping
[Status 11:53:57 INFO] acquire complete
[Status 11:53:58 INFO] writing housekeeping
[Sequencer 11:53:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:53:58 INFO] incremented S scene to 217 completed views
[Sequencer 11:53:58 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:53:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:53:58 INFO] incremented to [AERI set: name T217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:53:58 INFO] S217.SIG(18)
[sigmove 11:53:58 DEBUG] transformed S217Ma.SPC -> S217MA.SPC
[sigmove 11:53:58 DEBUG] transformed S217Mb.SPC -> S217MB.SPC
[sigmove 11:53:58 DEBUG] transformed S217Mc.SPC -> S217MC.SPC
[sigmove 11:53:58 DEBUG] transformed S217Md.SPC -> S217MD.SPC
[sigmove 11:53:58 DEBUG] transformed S217Me.SPC -> S217ME.SPC
[sigmove 11:53:58 DEBUG] transformed S217Mf.SPC -> S217MF.SPC
[Status 11:53:58 INFO] data for S217 transferred to science data processing
[Tidy 11:53:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:53:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:53:58 INFO] resetting WatchDogTimer
[Status 11:53:58 INFO] Starting Set [AERI set: name T217, 6 scans, 0 angle, D16300 command]
[Ingest 11:53:58 INFO] Sending XML status message
[Status 11:53:58 INFO] Mirror angle: 0
[Mirror 11:53:59 INFO] rotating to position T
[Status 11:53:59 INFO] .SET file for ACQ96 ready
[Ingest 11:53:59 INFO] Starting acquisition
[Status 11:54:00 INFO] reading housekeeping
[Status 11:54:18 INFO] acquire complete
[Status 11:54:18 INFO] writing housekeeping
[Sequencer 11:54:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:54:18 INFO] incremented T scene to 217 completed views
[Sequencer 11:54:18 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:54:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:54:18 INFO] incremented to [AERI set: name U217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:54:18 INFO] T217.SIG(18)
[sigmove 11:54:18 DEBUG] transformed T217Ma.SPC -> T217MA.SPC
[sigmove 11:54:18 DEBUG] transformed T217Mb.SPC -> T217MB.SPC
[sigmove 11:54:18 DEBUG] transformed T217Mc.SPC -> T217MC.SPC
[sigmove 11:54:18 DEBUG] transformed T217Md.SPC -> T217MD.SPC
[sigmove 11:54:18 DEBUG] transformed T217Me.SPC -> T217ME.SPC
[sigmove 11:54:18 DEBUG] transformed T217Mf.SPC -> T217MF.SPC
[Status 11:54:18 INFO] data for T217 transferred to science data processing
[Tidy 11:54:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:54:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:54:18 INFO] resetting WatchDogTimer
[Status 11:54:19 INFO] Starting Set [AERI set: name U217, 6 scans, 0 angle, D16300 command]
[Ingest 11:54:19 INFO] Sending XML status message
[Status 11:54:19 INFO] Mirror angle: 0
[Mirror 11:54:19 INFO] rotating to position U
[Status 11:54:19 INFO] .SET file for ACQ96 ready
[Ingest 11:54:20 INFO] Starting acquisition
[Status 11:54:20 INFO] reading housekeeping
[Status 11:54:38 INFO] acquire complete
[Status 11:54:39 INFO] writing housekeeping
[Sequencer 11:54:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:54:39 INFO] incremented U scene to 217 completed views
[Sequencer 11:54:39 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:54:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:54:39 INFO] incremented to [AERI set: name V217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:54:39 INFO] U217.SIG(18)
[sigmove 11:54:39 DEBUG] transformed U217Ma.SPC -> U217MA.SPC
[sigmove 11:54:39 DEBUG] transformed U217Mb.SPC -> U217MB.SPC
[sigmove 11:54:39 DEBUG] transformed U217Mc.SPC -> U217MC.SPC
[sigmove 11:54:39 DEBUG] transformed U217Md.SPC -> U217MD.SPC
[sigmove 11:54:39 DEBUG] transformed U217Me.SPC -> U217ME.SPC
[sigmove 11:54:39 DEBUG] transformed U217Mf.SPC -> U217MF.SPC
[Status 11:54:39 INFO] data for U217 transferred to science data processing
[Tidy 11:54:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:54:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:54:39 INFO] resetting WatchDogTimer
[Status 11:54:39 INFO] Starting Set [AERI set: name V217, 6 scans, 0 angle, D16300 command]
[Ingest 11:54:39 INFO] Sending XML status message
[Status 11:54:39 INFO] Mirror angle: 0
[Mirror 11:54:39 INFO] rotating to position V
[Status 11:54:40 INFO] .SET file for ACQ96 ready
[Ingest 11:54:40 INFO] Starting acquisition
[Status 11:54:40 INFO] reading housekeeping
[Status 11:54:58 INFO] acquire complete
[Status 11:54:59 INFO] writing housekeeping
[Sequencer 11:54:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:54:59 INFO] incremented V scene to 217 completed views
[Sequencer 11:54:59 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:54:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:54:59 INFO] incremented to [AERI set: name W217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:54:59 INFO] V217.SIG(18)
[sigmove 11:54:59 DEBUG] transformed V217Ma.SPC -> V217MA.SPC
[sigmove 11:54:59 DEBUG] transformed V217Mb.SPC -> V217MB.SPC
[sigmove 11:54:59 DEBUG] transformed V217Mc.SPC -> V217MC.SPC
[sigmove 11:54:59 DEBUG] transformed V217Md.SPC -> V217MD.SPC
[sigmove 11:54:59 DEBUG] transformed V217Me.SPC -> V217ME.SPC
[sigmove 11:54:59 DEBUG] transformed V217Mf.SPC -> V217MF.SPC
[Status 11:54:59 INFO] data for V217 transferred to science data processing
[Tidy 11:54:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:54:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:54:59 INFO] resetting WatchDogTimer
[Status 11:54:59 INFO] Starting Set [AERI set: name W217, 6 scans, 0 angle, D16300 command]
[Ingest 11:54:59 INFO] Sending XML status message
[Status 11:54:59 INFO] Mirror angle: 0
[Mirror 11:54:59 INFO] rotating to position W
[Status 11:55:00 INFO] .SET file for ACQ96 ready
[Ingest 11:55:00 INFO] Starting acquisition
[Status 11:55:00 INFO] reading housekeeping
[Status 11:55:18 INFO] acquire complete
[Status 11:55:19 INFO] writing housekeeping
[Sequencer 11:55:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:55:19 INFO] incremented W scene to 217 completed views
[Sequencer 11:55:19 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:55:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:55:19 INFO] incremented to [AERI set: name X217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:55:19 INFO] W217.SIG(18)
[sigmove 11:55:19 DEBUG] transformed W217Ma.SPC -> W217MA.SPC
[sigmove 11:55:19 DEBUG] transformed W217Mb.SPC -> W217MB.SPC
[sigmove 11:55:19 DEBUG] transformed W217Mc.SPC -> W217MC.SPC
[sigmove 11:55:19 DEBUG] transformed W217Md.SPC -> W217MD.SPC
[sigmove 11:55:19 DEBUG] transformed W217Me.SPC -> W217ME.SPC
[sigmove 11:55:19 DEBUG] transformed W217Mf.SPC -> W217MF.SPC
[Status 11:55:19 INFO] data for W217 transferred to science data processing
[Tidy 11:55:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:55:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:55:19 INFO] resetting WatchDogTimer
[Status 11:55:19 INFO] Starting Set [AERI set: name X217, 6 scans, 0 angle, D16300 command]
[Ingest 11:55:19 INFO] Sending XML status message
[Status 11:55:19 INFO] Mirror angle: 0
[Mirror 11:55:19 INFO] rotating to position X
[Status 11:55:20 INFO] .SET file for ACQ96 ready
[Ingest 11:55:20 INFO] Starting acquisition
[Status 11:55:20 INFO] reading housekeeping
[Status 11:55:38 INFO] acquire complete
[Status 11:55:39 INFO] writing housekeeping
[Sequencer 11:55:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:55:39 INFO] incremented X scene to 217 completed views
[Sequencer 11:55:39 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:55:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:55:39 INFO] incremented to [AERI set: name Y217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:55:39 INFO] X217.SIG(18)
[sigmove 11:55:39 DEBUG] transformed X217Ma.SPC -> X217MA.SPC
[sigmove 11:55:39 DEBUG] transformed X217Mb.SPC -> X217MB.SPC
[sigmove 11:55:39 DEBUG] transformed X217Mc.SPC -> X217MC.SPC
[sigmove 11:55:39 DEBUG] transformed X217Md.SPC -> X217MD.SPC
[sigmove 11:55:39 DEBUG] transformed X217Me.SPC -> X217ME.SPC
[sigmove 11:55:39 DEBUG] transformed X217Mf.SPC -> X217MF.SPC
[Status 11:55:39 INFO] data for X217 transferred to science data processing
[Tidy 11:55:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:55:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:55:39 INFO] resetting WatchDogTimer
[Status 11:55:39 INFO] Starting Set [AERI set: name Y217, 6 scans, 0 angle, D16300 command]
[Ingest 11:55:39 INFO] Sending XML status message
[Status 11:55:39 INFO] Mirror angle: 0
[Mirror 11:55:40 INFO] rotating to position Y
[Status 11:55:40 INFO] .SET file for ACQ96 ready
[Ingest 11:55:40 INFO] Starting acquisition
[Status 11:55:41 INFO] reading housekeeping
[Status 11:55:58 INFO] acquire complete
[Status 11:55:59 INFO] writing housekeeping
[Sequencer 11:55:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:55:59 INFO] incremented Y scene to 217 completed views
[Sequencer 11:55:59 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:55:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:55:59 INFO] incremented to [AERI set: name Z217, 6 scans, 0 angle, D16300 command] set
[sigmove 11:55:59 INFO] Y217.SIG(18)
[sigmove 11:55:59 DEBUG] transformed Y217Ma.SPC -> Y217MA.SPC
[sigmove 11:55:59 DEBUG] transformed Y217Mb.SPC -> Y217MB.SPC
[sigmove 11:55:59 DEBUG] transformed Y217Mc.SPC -> Y217MC.SPC
[sigmove 11:55:59 DEBUG] transformed Y217Md.SPC -> Y217MD.SPC
[sigmove 11:55:59 DEBUG] transformed Y217Me.SPC -> Y217ME.SPC
[sigmove 11:55:59 DEBUG] transformed Y217Mf.SPC -> Y217MF.SPC
[Status 11:55:59 INFO] data for Y217 transferred to science data processing
[Tidy 11:55:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:55:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:55:59 INFO] resetting WatchDogTimer
[Status 11:56:00 INFO] Starting Set [AERI set: name Z217, 6 scans, 0 angle, D16300 command]
[Ingest 11:56:00 INFO] Sending XML status message
[Status 11:56:00 INFO] Mirror angle: 0
[Mirror 11:56:00 INFO] rotating to position Z
[Status 11:56:00 INFO] .SET file for ACQ96 ready
[Ingest 11:56:01 INFO] Starting acquisition
[Status 11:56:01 INFO] reading housekeeping
[Status 11:56:19 INFO] acquire complete
[Status 11:56:19 INFO] writing housekeeping
[Sequencer 11:56:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:56:19 INFO] incremented Z scene to 217 completed views
[Sequencer 11:56:19 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 11:56:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:56:19 INFO] incremented to [AERI set: name A218, 6 scans, 120 angle, D28300 command] set
[sigmove 11:56:19 INFO] Z217.SIG(18)
[sigmove 11:56:19 DEBUG] transformed Z217Ma.SPC -> Z217MA.SPC
[sigmove 11:56:19 DEBUG] transformed Z217Mb.SPC -> Z217MB.SPC
[sigmove 11:56:19 DEBUG] transformed Z217Mc.SPC -> Z217MC.SPC
[sigmove 11:56:19 DEBUG] transformed Z217Md.SPC -> Z217MD.SPC
[sigmove 11:56:19 DEBUG] transformed Z217Me.SPC -> Z217ME.SPC
[sigmove 11:56:19 DEBUG] transformed Z217Mf.SPC -> Z217MF.SPC
[Status 11:56:19 INFO] data for Z217 transferred to science data processing
[Tidy 11:56:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:56:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:56:19 INFO] resetting WatchDogTimer
[Status 11:56:20 INFO] Starting Set [AERI set: name A218, 6 scans, 120 angle, D28300 command]
[Ingest 11:56:20 INFO] Sending XML status message
[Status 11:56:20 INFO] Mirror angle: 120
[Mirror 11:56:20 INFO] rotating to position A
[Status 11:56:22 INFO] .SET file for ACQ96 ready
[Ingest 11:56:22 INFO] Starting acquisition
[Status 11:56:22 INFO] reading housekeeping
[Status 11:56:40 INFO] acquire complete
[Status 11:56:41 INFO] writing housekeeping
[Sequencer 11:56:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:56:41 INFO] incremented A scene to 218 completed views
[Sequencer 11:56:41 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:56:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:56:41 INFO] incremented to [AERI set: name H218, 6 scans, 60 angle, D22500 command] set
[sigmove 11:56:41 INFO] A218.SIG(18)
[sigmove 11:56:41 DEBUG] transformed A218Ma.SPC -> A218MA.SPC
[sigmove 11:56:41 DEBUG] transformed A218Mb.SPC -> A218MB.SPC
[sigmove 11:56:41 DEBUG] transformed A218Mc.SPC -> A218MC.SPC
[sigmove 11:56:41 DEBUG] transformed A218Md.SPC -> A218MD.SPC
[sigmove 11:56:41 DEBUG] transformed A218Me.SPC -> A218ME.SPC
[sigmove 11:56:41 DEBUG] transformed A218Mf.SPC -> A218MF.SPC
[Status 11:56:41 INFO] data for A218 transferred to science data processing
[Tidy 11:56:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:56:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:56:41 INFO] resetting WatchDogTimer
[Status 11:56:41 INFO] Starting Set [AERI set: name H218, 6 scans, 60 angle, D22500 command]
[Ingest 11:56:41 INFO] Sending XML status message
[Status 11:56:41 INFO] Mirror angle: 60
[Mirror 11:56:41 INFO] rotating to position H
[Status 11:56:42 INFO] .SET file for ACQ96 ready
[Ingest 11:56:43 INFO] Starting acquisition
[Status 11:56:43 INFO] reading housekeeping
[Status 11:57:00 INFO] acquire complete
[Status 11:57:01 INFO] writing housekeeping
[Sequencer 11:57:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:57:01 INFO] incremented H scene to 218 completed views
[Sequencer 11:57:01 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 11:57:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:57:01 INFO] incremented to [AERI set: name S218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:57:01 INFO] H218.SIG(18)
[sigmove 11:57:01 DEBUG] transformed H218Ma.SPC -> H218MA.SPC
[sigmove 11:57:01 DEBUG] transformed H218Mb.SPC -> H218MB.SPC
[sigmove 11:57:01 DEBUG] transformed H218Mc.SPC -> H218MC.SPC
[sigmove 11:57:01 DEBUG] transformed H218Md.SPC -> H218MD.SPC
[sigmove 11:57:01 DEBUG] transformed H218Me.SPC -> H218ME.SPC
[sigmove 11:57:01 DEBUG] transformed H218Mf.SPC -> H218MF.SPC
[Status 11:57:01 INFO] data for H218 transferred to science data processing
[Tidy 11:57:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:57:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:57:01 INFO] resetting WatchDogTimer
[Status 11:57:01 INFO] Starting Set [AERI set: name S218, 6 scans, 0 angle, D16300 command]
[Ingest 11:57:01 INFO] Sending XML status message
[Status 11:57:01 INFO] Mirror angle: 0
[Mirror 11:57:02 INFO] rotating to position S
[Status 11:57:03 INFO] .SET file for ACQ96 ready
[Ingest 11:57:03 INFO] Starting acquisition
[Status 11:57:03 INFO] reading housekeeping
[Status 11:57:20 INFO] acquire complete
[Status 11:57:21 INFO] writing housekeeping
[Sequencer 11:57:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:57:21 INFO] incremented S scene to 218 completed views
[Sequencer 11:57:21 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:57:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:57:21 INFO] incremented to [AERI set: name T218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:57:21 INFO] S218.SIG(18)
[sigmove 11:57:21 DEBUG] transformed S218Ma.SPC -> S218MA.SPC
[sigmove 11:57:21 DEBUG] transformed S218Mb.SPC -> S218MB.SPC
[sigmove 11:57:21 DEBUG] transformed S218Mc.SPC -> S218MC.SPC
[sigmove 11:57:21 DEBUG] transformed S218Md.SPC -> S218MD.SPC
[sigmove 11:57:21 DEBUG] transformed S218Me.SPC -> S218ME.SPC
[sigmove 11:57:21 DEBUG] transformed S218Mf.SPC -> S218MF.SPC
[Status 11:57:21 INFO] data for S218 transferred to science data processing
[Tidy 11:57:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:57:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:57:21 INFO] resetting WatchDogTimer
[Status 11:57:21 INFO] Starting Set [AERI set: name T218, 6 scans, 0 angle, D16300 command]
[Ingest 11:57:21 INFO] Sending XML status message
[Status 11:57:21 INFO] Mirror angle: 0
[Mirror 11:57:22 INFO] rotating to position T
[Status 11:57:22 INFO] .SET file for ACQ96 ready
[Ingest 11:57:22 INFO] Starting acquisition
[Status 11:57:23 INFO] reading housekeeping
[Status 11:57:41 INFO] acquire complete
[Status 11:57:41 INFO] writing housekeeping
[Sequencer 11:57:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:57:41 INFO] incremented T scene to 218 completed views
[Sequencer 11:57:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:57:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:57:41 INFO] incremented to [AERI set: name U218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:57:41 INFO] T218.SIG(18)
[sigmove 11:57:41 DEBUG] transformed T218Ma.SPC -> T218MA.SPC
[sigmove 11:57:41 DEBUG] transformed T218Mb.SPC -> T218MB.SPC
[sigmove 11:57:41 DEBUG] transformed T218Mc.SPC -> T218MC.SPC
[sigmove 11:57:41 DEBUG] transformed T218Md.SPC -> T218MD.SPC
[sigmove 11:57:41 DEBUG] transformed T218Me.SPC -> T218ME.SPC
[sigmove 11:57:41 DEBUG] transformed T218Mf.SPC -> T218MF.SPC
[Status 11:57:41 INFO] data for T218 transferred to science data processing
[Tidy 11:57:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:57:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:57:41 INFO] resetting WatchDogTimer
[Status 11:57:42 INFO] Starting Set [AERI set: name U218, 6 scans, 0 angle, D16300 command]
[Ingest 11:57:42 INFO] Sending XML status message
[Status 11:57:42 INFO] Mirror angle: 0
[Mirror 11:57:42 INFO] rotating to position U
[Status 11:57:42 INFO] .SET file for ACQ96 ready
[Ingest 11:57:43 INFO] Starting acquisition
[Status 11:57:43 INFO] reading housekeeping
[Status 11:58:01 INFO] acquire complete
[Status 11:58:02 INFO] writing housekeeping
[Sequencer 11:58:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:58:02 INFO] incremented U scene to 218 completed views
[Sequencer 11:58:02 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:58:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:58:02 INFO] incremented to [AERI set: name V218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:58:02 INFO] U218.SIG(18)
[sigmove 11:58:02 DEBUG] transformed U218Ma.SPC -> U218MA.SPC
[sigmove 11:58:02 DEBUG] transformed U218Mb.SPC -> U218MB.SPC
[sigmove 11:58:02 DEBUG] transformed U218Mc.SPC -> U218MC.SPC
[sigmove 11:58:02 DEBUG] transformed U218Md.SPC -> U218MD.SPC
[sigmove 11:58:02 DEBUG] transformed U218Me.SPC -> U218ME.SPC
[sigmove 11:58:02 DEBUG] transformed U218Mf.SPC -> U218MF.SPC
[Status 11:58:02 INFO] data for U218 transferred to science data processing
[Tidy 11:58:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:58:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:58:02 INFO] resetting WatchDogTimer
[Status 11:58:02 INFO] Starting Set [AERI set: name V218, 6 scans, 0 angle, D16300 command]
[Ingest 11:58:02 INFO] Sending XML status message
[Status 11:58:02 INFO] Mirror angle: 0
[Mirror 11:58:02 INFO] rotating to position V
[Status 11:58:03 INFO] .SET file for ACQ96 ready
[Ingest 11:58:03 INFO] Starting acquisition
[Status 11:58:03 INFO] reading housekeeping
[Status 11:58:21 INFO] acquire complete
[Status 11:58:22 INFO] writing housekeeping
[Sequencer 11:58:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:58:22 INFO] incremented V scene to 218 completed views
[Sequencer 11:58:22 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:58:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:58:22 INFO] incremented to [AERI set: name W218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:58:22 INFO] V218.SIG(18)
[sigmove 11:58:22 DEBUG] transformed V218Ma.SPC -> V218MA.SPC
[sigmove 11:58:22 DEBUG] transformed V218Mb.SPC -> V218MB.SPC
[sigmove 11:58:22 DEBUG] transformed V218Mc.SPC -> V218MC.SPC
[sigmove 11:58:22 DEBUG] transformed V218Md.SPC -> V218MD.SPC
[sigmove 11:58:22 DEBUG] transformed V218Me.SPC -> V218ME.SPC
[sigmove 11:58:22 DEBUG] transformed V218Mf.SPC -> V218MF.SPC
[Status 11:58:22 INFO] data for V218 transferred to science data processing
[Tidy 11:58:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:58:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:58:22 INFO] resetting WatchDogTimer
[Status 11:58:22 INFO] Starting Set [AERI set: name W218, 6 scans, 0 angle, D16300 command]
[Ingest 11:58:22 INFO] Sending XML status message
[Status 11:58:22 INFO] Mirror angle: 0
[Mirror 11:58:22 INFO] rotating to position W
[Status 11:58:23 INFO] .SET file for ACQ96 ready
[Ingest 11:58:23 INFO] Starting acquisition
[Status 11:58:23 INFO] reading housekeeping
[Status 11:58:41 INFO] acquire complete
[Status 11:58:42 INFO] writing housekeeping
[Sequencer 11:58:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:58:42 INFO] incremented W scene to 218 completed views
[Sequencer 11:58:42 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:58:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:58:42 INFO] incremented to [AERI set: name X218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:58:42 INFO] W218.SIG(18)
[sigmove 11:58:42 DEBUG] transformed W218Ma.SPC -> W218MA.SPC
[sigmove 11:58:42 DEBUG] transformed W218Mb.SPC -> W218MB.SPC
[sigmove 11:58:42 DEBUG] transformed W218Mc.SPC -> W218MC.SPC
[sigmove 11:58:42 DEBUG] transformed W218Md.SPC -> W218MD.SPC
[sigmove 11:58:42 DEBUG] transformed W218Me.SPC -> W218ME.SPC
[sigmove 11:58:42 DEBUG] transformed W218Mf.SPC -> W218MF.SPC
[Status 11:58:42 INFO] data for W218 transferred to science data processing
[Tidy 11:58:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:58:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:58:42 INFO] resetting WatchDogTimer
[Status 11:58:42 INFO] Starting Set [AERI set: name X218, 6 scans, 0 angle, D16300 command]
[Ingest 11:58:42 INFO] Sending XML status message
[Status 11:58:42 INFO] Mirror angle: 0
[Mirror 11:58:43 INFO] rotating to position X
[Status 11:58:43 INFO] .SET file for ACQ96 ready
[Ingest 11:58:43 INFO] Starting acquisition
[Status 11:58:44 INFO] reading housekeeping
[Status 11:59:01 INFO] acquire complete
[Status 11:59:02 INFO] writing housekeeping
[Sequencer 11:59:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:59:02 INFO] incremented X scene to 218 completed views
[Sequencer 11:59:02 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:59:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:59:02 INFO] incremented to [AERI set: name Y218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:59:02 INFO] X218.SIG(18)
[sigmove 11:59:02 DEBUG] transformed X218Ma.SPC -> X218MA.SPC
[sigmove 11:59:02 DEBUG] transformed X218Mb.SPC -> X218MB.SPC
[sigmove 11:59:02 DEBUG] transformed X218Mc.SPC -> X218MC.SPC
[sigmove 11:59:02 DEBUG] transformed X218Md.SPC -> X218MD.SPC
[sigmove 11:59:02 DEBUG] transformed X218Me.SPC -> X218ME.SPC
[sigmove 11:59:02 DEBUG] transformed X218Mf.SPC -> X218MF.SPC
[Status 11:59:02 INFO] data for X218 transferred to science data processing
[Tidy 11:59:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:59:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:59:02 INFO] resetting WatchDogTimer
[Status 11:59:02 INFO] Starting Set [AERI set: name Y218, 6 scans, 0 angle, D16300 command]
[Ingest 11:59:02 INFO] Sending XML status message
[Status 11:59:02 INFO] Mirror angle: 0
[Mirror 11:59:03 INFO] rotating to position Y
[Status 11:59:03 INFO] .SET file for ACQ96 ready
[Ingest 11:59:03 INFO] Starting acquisition
[Status 11:59:04 INFO] reading housekeeping
[Status 11:59:25 INFO] acquire complete
[Status 11:59:26 INFO] writing housekeeping
[Sequencer 11:59:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:59:26 INFO] incremented Y scene to 218 completed views
[Sequencer 11:59:26 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 11:59:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:59:26 INFO] incremented to [AERI set: name Z218, 6 scans, 0 angle, D16300 command] set
[sigmove 11:59:26 INFO] Y218.SIG(18)
[sigmove 11:59:26 DEBUG] transformed Y218Ma.SPC -> Y218MA.SPC
[sigmove 11:59:26 DEBUG] transformed Y218Mb.SPC -> Y218MB.SPC
[sigmove 11:59:26 DEBUG] transformed Y218Mc.SPC -> Y218MC.SPC
[sigmove 11:59:26 DEBUG] transformed Y218Md.SPC -> Y218MD.SPC
[sigmove 11:59:26 DEBUG] transformed Y218Me.SPC -> Y218ME.SPC
[sigmove 11:59:26 DEBUG] transformed Y218Mf.SPC -> Y218MF.SPC
[Status 11:59:26 INFO] data for Y218 transferred to science data processing
[Tidy 11:59:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:59:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:59:26 INFO] resetting WatchDogTimer
[Status 11:59:26 INFO] Starting Set [AERI set: name Z218, 6 scans, 0 angle, D16300 command]
[Ingest 11:59:26 INFO] Sending XML status message
[Status 11:59:26 INFO] Mirror angle: 0
[Mirror 11:59:26 INFO] rotating to position Z
[Status 11:59:27 INFO] .SET file for ACQ96 ready
[Ingest 11:59:27 INFO] Starting acquisition
[Status 11:59:27 INFO] reading housekeeping
[Status 11:59:45 INFO] acquire complete
[Status 11:59:46 INFO] writing housekeeping
[Sequencer 11:59:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 11:59:46 INFO] incremented Z scene to 218 completed views
[Sequencer 11:59:46 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 11:59:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 11:59:46 INFO] incremented to [AERI set: name H219, 6 scans, 60 angle, D22500 command] set
[sigmove 11:59:46 INFO] Z218.SIG(18)
[sigmove 11:59:46 DEBUG] transformed Z218Ma.SPC -> Z218MA.SPC
[sigmove 11:59:46 DEBUG] transformed Z218Mb.SPC -> Z218MB.SPC
[sigmove 11:59:46 DEBUG] transformed Z218Mc.SPC -> Z218MC.SPC
[sigmove 11:59:46 DEBUG] transformed Z218Md.SPC -> Z218MD.SPC
[sigmove 11:59:46 DEBUG] transformed Z218Me.SPC -> Z218ME.SPC
[sigmove 11:59:46 DEBUG] transformed Z218Mf.SPC -> Z218MF.SPC
[Status 11:59:46 INFO] data for Z218 transferred to science data processing
[Tidy 11:59:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 11:59:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 11:59:46 INFO] resetting WatchDogTimer
[Status 11:59:46 INFO] Starting Set [AERI set: name H219, 6 scans, 60 angle, D22500 command]
[Ingest 11:59:46 INFO] Sending XML status message
[Status 11:59:46 INFO] Mirror angle: 60
[Mirror 11:59:47 INFO] rotating to position H
[Status 11:59:47 INFO] .SET file for ACQ96 ready
[Ingest 11:59:48 INFO] Starting acquisition
[Status 11:59:48 INFO] reading housekeeping
[Status 12:00:05 INFO] acquire complete
[Status 12:00:06 INFO] writing housekeeping
[Sequencer 12:00:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:00:06 INFO] incremented H scene to 219 completed views
[Sequencer 12:00:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:00:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:00:06 INFO] incremented to [AERI set: name A219, 6 scans, 120 angle, D28300 command] set
[sigmove 12:00:06 INFO] H219.SIG(18)
[sigmove 12:00:06 DEBUG] transformed H219Ma.SPC -> H219MA.SPC
[sigmove 12:00:06 DEBUG] transformed H219Mb.SPC -> H219MB.SPC
[sigmove 12:00:06 DEBUG] transformed H219Mc.SPC -> H219MC.SPC
[sigmove 12:00:06 DEBUG] transformed H219Md.SPC -> H219MD.SPC
[sigmove 12:00:06 DEBUG] transformed H219Me.SPC -> H219ME.SPC
[sigmove 12:00:06 DEBUG] transformed H219Mf.SPC -> H219MF.SPC
[Status 12:00:06 INFO] data for H219 transferred to science data processing
[Tidy 12:00:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:00:06 INFO] A217.FIN(19),H217.FIN(19),S217.FIN(19),T217.FIN(19),U217.FIN(19),V217.FIN(19),W217.FIN(19),X217.FIN(19),Y217.FIN(19),Z217.FIN(19),A218.FIN(19),H218.FIN(19),S218.FIN(19),T218.FIN(19),U218.FIN(19),V218.FIN(19),W218.FIN(19),X218.FIN(19),Y218.FIN(19),Z218.FIN(19)
[sigmove 12:00:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:00:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:00:10 DEBUG] done zipping
[WatchDog 12:00:10 INFO] resetting WatchDogTimer
[Status 12:00:11 INFO] Starting Set [AERI set: name A219, 6 scans, 120 angle, D28300 command]
[Ingest 12:00:11 INFO] Sending XML status message
[Status 12:00:11 INFO] Mirror angle: 120
[Mirror 12:00:11 INFO] rotating to position A
[Status 12:00:12 INFO] .SET file for ACQ96 ready
[Ingest 12:00:12 INFO] Starting acquisition
[Status 12:00:12 INFO] reading housekeeping
[Status 12:00:30 INFO] acquire complete
[Status 12:00:31 INFO] writing housekeeping
[Sequencer 12:00:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:00:31 INFO] incremented A scene to 219 completed views
[Sequencer 12:00:31 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:00:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:00:31 INFO] incremented to [AERI set: name S219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:00:31 INFO] A219.SIG(18)
[sigmove 12:00:31 DEBUG] transformed A219Ma.SPC -> A219MA.SPC
[sigmove 12:00:31 DEBUG] transformed A219Mb.SPC -> A219MB.SPC
[sigmove 12:00:31 DEBUG] transformed A219Mc.SPC -> A219MC.SPC
[sigmove 12:00:31 DEBUG] transformed A219Md.SPC -> A219MD.SPC
[sigmove 12:00:31 DEBUG] transformed A219Me.SPC -> A219ME.SPC
[sigmove 12:00:31 DEBUG] transformed A219Mf.SPC -> A219MF.SPC
[Status 12:00:31 INFO] data for A219 transferred to science data processing
[Tidy 12:00:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:00:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:00:31 INFO] resetting WatchDogTimer
[Status 12:00:31 INFO] Starting Set [AERI set: name S219, 6 scans, 0 angle, D16300 command]
[Ingest 12:00:31 INFO] Sending XML status message
[Status 12:00:31 INFO] Mirror angle: 0
[Mirror 12:00:31 INFO] rotating to position S
[Status 12:00:33 INFO] .SET file for ACQ96 ready
[Ingest 12:00:33 INFO] Starting acquisition
[Status 12:00:33 INFO] reading housekeeping
[Status 12:00:51 INFO] acquire complete
[Status 12:00:52 INFO] writing housekeeping
[Sequencer 12:00:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:00:52 INFO] incremented S scene to 219 completed views
[Sequencer 12:00:52 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:00:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:00:52 INFO] incremented to [AERI set: name T219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:00:52 INFO] S219.SIG(18)
[sigmove 12:00:52 DEBUG] transformed S219Ma.SPC -> S219MA.SPC
[sigmove 12:00:52 DEBUG] transformed S219Mb.SPC -> S219MB.SPC
[sigmove 12:00:52 DEBUG] transformed S219Mc.SPC -> S219MC.SPC
[sigmove 12:00:52 DEBUG] transformed S219Md.SPC -> S219MD.SPC
[sigmove 12:00:52 DEBUG] transformed S219Me.SPC -> S219ME.SPC
[sigmove 12:00:52 DEBUG] transformed S219Mf.SPC -> S219MF.SPC
[Status 12:00:52 INFO] data for S219 transferred to science data processing
[Tidy 12:00:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:00:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:00:52 INFO] resetting WatchDogTimer
[Status 12:00:52 INFO] Starting Set [AERI set: name T219, 6 scans, 0 angle, D16300 command]
[Ingest 12:00:52 INFO] Sending XML status message
[Status 12:00:52 INFO] Mirror angle: 0
[Mirror 12:00:53 INFO] rotating to position T
[Status 12:00:53 INFO] .SET file for ACQ96 ready
[Ingest 12:00:53 INFO] Starting acquisition
[Status 12:00:54 INFO] reading housekeeping
[Status 12:01:11 INFO] acquire complete
[Status 12:01:12 INFO] writing housekeeping
[Sequencer 12:01:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:01:12 INFO] incremented T scene to 219 completed views
[Sequencer 12:01:12 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:01:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:01:12 INFO] incremented to [AERI set: name U219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:01:12 INFO] T219.SIG(18)
[sigmove 12:01:12 DEBUG] transformed T219Ma.SPC -> T219MA.SPC
[sigmove 12:01:12 DEBUG] transformed T219Mb.SPC -> T219MB.SPC
[sigmove 12:01:12 DEBUG] transformed T219Mc.SPC -> T219MC.SPC
[sigmove 12:01:12 DEBUG] transformed T219Md.SPC -> T219MD.SPC
[sigmove 12:01:12 DEBUG] transformed T219Me.SPC -> T219ME.SPC
[sigmove 12:01:12 DEBUG] transformed T219Mf.SPC -> T219MF.SPC
[Status 12:01:12 INFO] data for T219 transferred to science data processing
[Tidy 12:01:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:01:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:01:12 INFO] resetting WatchDogTimer
[Status 12:01:13 INFO] Starting Set [AERI set: name U219, 6 scans, 0 angle, D16300 command]
[Ingest 12:01:13 INFO] Sending XML status message
[Status 12:01:13 INFO] Mirror angle: 0
[Mirror 12:01:13 INFO] rotating to position U
[Status 12:01:13 INFO] .SET file for ACQ96 ready
[Ingest 12:01:14 INFO] Starting acquisition
[Status 12:01:14 INFO] reading housekeeping
[Status 12:01:32 INFO] acquire complete
[Status 12:01:32 INFO] writing housekeeping
[Sequencer 12:01:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:01:32 INFO] incremented U scene to 219 completed views
[Sequencer 12:01:32 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:01:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:01:32 INFO] incremented to [AERI set: name V219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:01:32 INFO] U219.SIG(18)
[sigmove 12:01:32 DEBUG] transformed U219Ma.SPC -> U219MA.SPC
[sigmove 12:01:32 DEBUG] transformed U219Mb.SPC -> U219MB.SPC
[sigmove 12:01:32 DEBUG] transformed U219Mc.SPC -> U219MC.SPC
[sigmove 12:01:32 DEBUG] transformed U219Md.SPC -> U219MD.SPC
[sigmove 12:01:32 DEBUG] transformed U219Me.SPC -> U219ME.SPC
[sigmove 12:01:32 DEBUG] transformed U219Mf.SPC -> U219MF.SPC
[Status 12:01:33 INFO] data for U219 transferred to science data processing
[Tidy 12:01:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:01:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:01:33 INFO] resetting WatchDogTimer
[Status 12:01:33 INFO] Starting Set [AERI set: name V219, 6 scans, 0 angle, D16300 command]
[Ingest 12:01:33 INFO] Sending XML status message
[Status 12:01:33 INFO] Mirror angle: 0
[Mirror 12:01:33 INFO] rotating to position V
[Status 12:01:33 INFO] .SET file for ACQ96 ready
[Ingest 12:01:34 INFO] Starting acquisition
[Status 12:01:34 INFO] reading housekeeping
[Status 12:01:52 INFO] acquire complete
[Status 12:01:53 INFO] writing housekeeping
[Sequencer 12:01:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:01:53 INFO] incremented V scene to 219 completed views
[Sequencer 12:01:53 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:01:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:01:53 INFO] incremented to [AERI set: name W219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:01:53 INFO] V219.SIG(18)
[sigmove 12:01:53 DEBUG] transformed V219Ma.SPC -> V219MA.SPC
[sigmove 12:01:53 DEBUG] transformed V219Mb.SPC -> V219MB.SPC
[sigmove 12:01:53 DEBUG] transformed V219Mc.SPC -> V219MC.SPC
[sigmove 12:01:53 DEBUG] transformed V219Md.SPC -> V219MD.SPC
[sigmove 12:01:53 DEBUG] transformed V219Me.SPC -> V219ME.SPC
[sigmove 12:01:53 DEBUG] transformed V219Mf.SPC -> V219MF.SPC
[Status 12:01:53 INFO] data for V219 transferred to science data processing
[Tidy 12:01:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:01:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:01:53 INFO] resetting WatchDogTimer
[Status 12:01:53 INFO] Starting Set [AERI set: name W219, 6 scans, 0 angle, D16300 command]
[Ingest 12:01:53 INFO] Sending XML status message
[Status 12:01:53 INFO] Mirror angle: 0
[Mirror 12:01:53 INFO] rotating to position W
[Status 12:01:54 INFO] .SET file for ACQ96 ready
[Ingest 12:01:54 INFO] Starting acquisition
[Status 12:01:54 INFO] reading housekeeping
[Status 12:02:12 INFO] acquire complete
[Status 12:02:13 INFO] writing housekeeping
[Sequencer 12:02:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:02:13 INFO] incremented W scene to 219 completed views
[Sequencer 12:02:13 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:02:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:02:13 INFO] incremented to [AERI set: name X219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:02:13 INFO] W219.SIG(18)
[sigmove 12:02:13 DEBUG] transformed W219Ma.SPC -> W219MA.SPC
[sigmove 12:02:13 DEBUG] transformed W219Mb.SPC -> W219MB.SPC
[sigmove 12:02:13 DEBUG] transformed W219Mc.SPC -> W219MC.SPC
[sigmove 12:02:13 DEBUG] transformed W219Md.SPC -> W219MD.SPC
[sigmove 12:02:13 DEBUG] transformed W219Me.SPC -> W219ME.SPC
[sigmove 12:02:13 DEBUG] transformed W219Mf.SPC -> W219MF.SPC
[Status 12:02:13 INFO] data for W219 transferred to science data processing
[Tidy 12:02:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:02:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:02:13 INFO] resetting WatchDogTimer
[Status 12:02:13 INFO] Starting Set [AERI set: name X219, 6 scans, 0 angle, D16300 command]
[Ingest 12:02:13 INFO] Sending XML status message
[Status 12:02:13 INFO] Mirror angle: 0
[Mirror 12:02:14 INFO] rotating to position X
[Status 12:02:14 INFO] .SET file for ACQ96 ready
[Ingest 12:02:14 INFO] Starting acquisition
[Status 12:02:14 INFO] reading housekeeping
[Status 12:02:36 INFO] acquire complete
[Status 12:02:36 INFO] writing housekeeping
[Sequencer 12:02:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:02:36 INFO] incremented X scene to 219 completed views
[Sequencer 12:02:36 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:02:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:02:36 INFO] incremented to [AERI set: name Y219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:02:36 INFO] X219.SIG(18)
[sigmove 12:02:36 DEBUG] transformed X219Ma.SPC -> X219MA.SPC
[sigmove 12:02:36 DEBUG] transformed X219Mb.SPC -> X219MB.SPC
[sigmove 12:02:36 DEBUG] transformed X219Mc.SPC -> X219MC.SPC
[sigmove 12:02:36 DEBUG] transformed X219Md.SPC -> X219MD.SPC
[sigmove 12:02:36 DEBUG] transformed X219Me.SPC -> X219ME.SPC
[sigmove 12:02:36 DEBUG] transformed X219Mf.SPC -> X219MF.SPC
[Status 12:02:36 INFO] data for X219 transferred to science data processing
[Tidy 12:02:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:02:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:02:36 INFO] resetting WatchDogTimer
[Status 12:02:37 INFO] Starting Set [AERI set: name Y219, 6 scans, 0 angle, D16300 command]
[Ingest 12:02:37 INFO] Sending XML status message
[Status 12:02:37 INFO] Mirror angle: 0
[Mirror 12:02:37 INFO] rotating to position Y
[Status 12:02:37 INFO] .SET file for ACQ96 ready
[Ingest 12:02:38 INFO] Starting acquisition
[Status 12:02:38 INFO] reading housekeeping
[Status 12:02:56 INFO] acquire complete
[Status 12:02:57 INFO] writing housekeeping
[Sequencer 12:02:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:02:57 INFO] incremented Y scene to 219 completed views
[Sequencer 12:02:57 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:02:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:02:57 INFO] incremented to [AERI set: name Z219, 6 scans, 0 angle, D16300 command] set
[sigmove 12:02:57 INFO] Y219.SIG(18)
[sigmove 12:02:57 DEBUG] transformed Y219Ma.SPC -> Y219MA.SPC
[sigmove 12:02:57 DEBUG] transformed Y219Mb.SPC -> Y219MB.SPC
[sigmove 12:02:57 DEBUG] transformed Y219Mc.SPC -> Y219MC.SPC
[sigmove 12:02:57 DEBUG] transformed Y219Md.SPC -> Y219MD.SPC
[sigmove 12:02:57 DEBUG] transformed Y219Me.SPC -> Y219ME.SPC
[sigmove 12:02:57 DEBUG] transformed Y219Mf.SPC -> Y219MF.SPC
[Status 12:02:57 INFO] data for Y219 transferred to science data processing
[Tidy 12:02:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:02:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:02:57 INFO] resetting WatchDogTimer
[Status 12:02:57 INFO] Starting Set [AERI set: name Z219, 6 scans, 0 angle, D16300 command]
[Ingest 12:02:57 INFO] Sending XML status message
[Status 12:02:57 INFO] Mirror angle: 0
[Mirror 12:02:57 INFO] rotating to position Z
[Status 12:02:58 INFO] .SET file for ACQ96 ready
[Ingest 12:02:58 INFO] Starting acquisition
[Status 12:02:58 INFO] reading housekeeping
[Status 12:03:16 INFO] acquire complete
[Status 12:03:17 INFO] writing housekeeping
[Sequencer 12:03:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:03:17 INFO] incremented Z scene to 219 completed views
[Sequencer 12:03:17 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:03:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:03:17 INFO] incremented to [AERI set: name A220, 6 scans, 120 angle, D28300 command] set
[sigmove 12:03:17 INFO] Z219.SIG(18)
[sigmove 12:03:17 DEBUG] transformed Z219Ma.SPC -> Z219MA.SPC
[sigmove 12:03:17 DEBUG] transformed Z219Mb.SPC -> Z219MB.SPC
[sigmove 12:03:17 DEBUG] transformed Z219Mc.SPC -> Z219MC.SPC
[sigmove 12:03:17 DEBUG] transformed Z219Md.SPC -> Z219MD.SPC
[sigmove 12:03:17 DEBUG] transformed Z219Me.SPC -> Z219ME.SPC
[sigmove 12:03:17 DEBUG] transformed Z219Mf.SPC -> Z219MF.SPC
[Status 12:03:17 INFO] data for Z219 transferred to science data processing
[Tidy 12:03:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:03:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:03:17 INFO] resetting WatchDogTimer
[Status 12:03:17 INFO] Starting Set [AERI set: name A220, 6 scans, 120 angle, D28300 command]
[Ingest 12:03:17 INFO] Sending XML status message
[Status 12:03:17 INFO] Mirror angle: 120
[Mirror 12:03:17 INFO] rotating to position A
[Status 12:03:19 INFO] .SET file for ACQ96 ready
[Ingest 12:03:19 INFO] Starting acquisition
[Status 12:03:19 INFO] reading housekeeping
[Status 12:03:37 INFO] acquire complete
[Status 12:03:38 INFO] writing housekeeping
[Sequencer 12:03:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:03:38 INFO] incremented A scene to 220 completed views
[Sequencer 12:03:38 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:03:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:03:38 INFO] incremented to [AERI set: name H220, 6 scans, 60 angle, D22500 command] set
[sigmove 12:03:38 INFO] A220.SIG(18)
[sigmove 12:03:38 DEBUG] transformed A220Ma.SPC -> A220MA.SPC
[sigmove 12:03:38 DEBUG] transformed A220Mb.SPC -> A220MB.SPC
[sigmove 12:03:38 DEBUG] transformed A220Mc.SPC -> A220MC.SPC
[sigmove 12:03:38 DEBUG] transformed A220Md.SPC -> A220MD.SPC
[sigmove 12:03:38 DEBUG] transformed A220Me.SPC -> A220ME.SPC
[sigmove 12:03:38 DEBUG] transformed A220Mf.SPC -> A220MF.SPC
[Status 12:03:38 INFO] data for A220 transferred to science data processing
[Tidy 12:03:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:03:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:03:38 INFO] resetting WatchDogTimer
[Status 12:03:38 INFO] Starting Set [AERI set: name H220, 6 scans, 60 angle, D22500 command]
[Ingest 12:03:38 INFO] Sending XML status message
[Status 12:03:38 INFO] Mirror angle: 60
[Mirror 12:03:39 INFO] rotating to position H
[Status 12:03:40 INFO] .SET file for ACQ96 ready
[Ingest 12:03:40 INFO] Starting acquisition
[Status 12:03:40 INFO] reading housekeeping
[Status 12:03:58 INFO] acquire complete
[Status 12:03:58 INFO] writing housekeeping
[Sequencer 12:03:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:03:58 INFO] incremented H scene to 220 completed views
[Sequencer 12:03:58 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:03:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:03:58 INFO] incremented to [AERI set: name S220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:03:58 INFO] H220.SIG(18)
[sigmove 12:03:58 DEBUG] transformed H220Ma.SPC -> H220MA.SPC
[sigmove 12:03:58 DEBUG] transformed H220Mb.SPC -> H220MB.SPC
[sigmove 12:03:58 DEBUG] transformed H220Mc.SPC -> H220MC.SPC
[sigmove 12:03:58 DEBUG] transformed H220Md.SPC -> H220MD.SPC
[sigmove 12:03:58 DEBUG] transformed H220Me.SPC -> H220ME.SPC
[sigmove 12:03:58 DEBUG] transformed H220Mf.SPC -> H220MF.SPC
[Status 12:03:58 INFO] data for H220 transferred to science data processing
[Tidy 12:03:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:03:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:03:58 INFO] resetting WatchDogTimer
[Status 12:03:59 INFO] Starting Set [AERI set: name S220, 6 scans, 0 angle, D16300 command]
[Ingest 12:03:59 INFO] Sending XML status message
[Status 12:03:59 INFO] Mirror angle: 0
[Mirror 12:03:59 INFO] rotating to position S
[Status 12:04:00 INFO] .SET file for ACQ96 ready
[Ingest 12:04:00 INFO] Starting acquisition
[Status 12:04:00 INFO] reading housekeeping
[Status 12:04:18 INFO] acquire complete
[Status 12:04:19 INFO] writing housekeeping
[Sequencer 12:04:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:04:19 INFO] incremented S scene to 220 completed views
[Sequencer 12:04:19 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:04:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:04:19 INFO] incremented to [AERI set: name T220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:04:19 INFO] S220.SIG(18)
[sigmove 12:04:19 DEBUG] transformed S220Ma.SPC -> S220MA.SPC
[sigmove 12:04:19 DEBUG] transformed S220Mb.SPC -> S220MB.SPC
[sigmove 12:04:19 DEBUG] transformed S220Mc.SPC -> S220MC.SPC
[sigmove 12:04:19 DEBUG] transformed S220Md.SPC -> S220MD.SPC
[sigmove 12:04:19 DEBUG] transformed S220Me.SPC -> S220ME.SPC
[sigmove 12:04:19 DEBUG] transformed S220Mf.SPC -> S220MF.SPC
[Status 12:04:19 INFO] data for S220 transferred to science data processing
[Tidy 12:04:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:04:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:04:19 INFO] resetting WatchDogTimer
[Status 12:04:19 INFO] Starting Set [AERI set: name T220, 6 scans, 0 angle, D16300 command]
[Ingest 12:04:19 INFO] Sending XML status message
[Status 12:04:19 INFO] Mirror angle: 0
[Mirror 12:04:19 INFO] rotating to position T
[Status 12:04:20 INFO] .SET file for ACQ96 ready
[Ingest 12:04:20 INFO] Starting acquisition
[Status 12:04:20 INFO] reading housekeeping
[Status 12:04:38 INFO] acquire complete
[Status 12:04:39 INFO] writing housekeeping
[Sequencer 12:04:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:04:39 INFO] incremented T scene to 220 completed views
[Sequencer 12:04:39 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:04:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:04:39 INFO] incremented to [AERI set: name U220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:04:39 INFO] T220.SIG(18)
[sigmove 12:04:39 DEBUG] transformed T220Ma.SPC -> T220MA.SPC
[sigmove 12:04:39 DEBUG] transformed T220Mb.SPC -> T220MB.SPC
[sigmove 12:04:39 DEBUG] transformed T220Mc.SPC -> T220MC.SPC
[sigmove 12:04:39 DEBUG] transformed T220Md.SPC -> T220MD.SPC
[sigmove 12:04:39 DEBUG] transformed T220Me.SPC -> T220ME.SPC
[sigmove 12:04:39 DEBUG] transformed T220Mf.SPC -> T220MF.SPC
[Status 12:04:39 INFO] data for T220 transferred to science data processing
[Tidy 12:04:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:04:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:04:39 INFO] resetting WatchDogTimer
[Status 12:04:39 INFO] Starting Set [AERI set: name U220, 6 scans, 0 angle, D16300 command]
[Ingest 12:04:39 INFO] Sending XML status message
[Status 12:04:39 INFO] Mirror angle: 0
[Mirror 12:04:39 INFO] rotating to position U
[Status 12:04:40 INFO] .SET file for ACQ96 ready
[Ingest 12:04:40 INFO] Starting acquisition
[Status 12:04:40 INFO] reading housekeeping
[Status 12:04:58 INFO] acquire complete
[Status 12:04:59 INFO] writing housekeeping
[Sequencer 12:04:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:04:59 INFO] incremented U scene to 220 completed views
[Sequencer 12:04:59 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:04:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:04:59 INFO] incremented to [AERI set: name V220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:04:59 INFO] U220.SIG(18)
[sigmove 12:04:59 DEBUG] transformed U220Ma.SPC -> U220MA.SPC
[sigmove 12:04:59 DEBUG] transformed U220Mb.SPC -> U220MB.SPC
[sigmove 12:04:59 DEBUG] transformed U220Mc.SPC -> U220MC.SPC
[sigmove 12:04:59 DEBUG] transformed U220Md.SPC -> U220MD.SPC
[sigmove 12:04:59 DEBUG] transformed U220Me.SPC -> U220ME.SPC
[sigmove 12:04:59 DEBUG] transformed U220Mf.SPC -> U220MF.SPC
[Status 12:04:59 INFO] data for U220 transferred to science data processing
[Tidy 12:04:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:04:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:04:59 INFO] resetting WatchDogTimer
[Status 12:04:59 INFO] Starting Set [AERI set: name V220, 6 scans, 0 angle, D16300 command]
[Ingest 12:04:59 INFO] Sending XML status message
[Status 12:04:59 INFO] Mirror angle: 0
[Mirror 12:05:00 INFO] rotating to position V
[Status 12:05:00 INFO] .SET file for ACQ96 ready
[Ingest 12:05:00 INFO] Starting acquisition
[Status 12:05:01 INFO] reading housekeeping
[Status 12:05:18 INFO] acquire complete
[Status 12:05:19 INFO] writing housekeeping
[Sequencer 12:05:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:05:19 INFO] incremented V scene to 220 completed views
[Sequencer 12:05:19 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:05:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:05:19 INFO] incremented to [AERI set: name W220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:05:19 INFO] V220.SIG(18)
[sigmove 12:05:19 DEBUG] transformed V220Ma.SPC -> V220MA.SPC
[sigmove 12:05:19 DEBUG] transformed V220Mb.SPC -> V220MB.SPC
[sigmove 12:05:19 DEBUG] transformed V220Mc.SPC -> V220MC.SPC
[sigmove 12:05:19 DEBUG] transformed V220Md.SPC -> V220MD.SPC
[sigmove 12:05:19 DEBUG] transformed V220Me.SPC -> V220ME.SPC
[sigmove 12:05:19 DEBUG] transformed V220Mf.SPC -> V220MF.SPC
[Status 12:05:19 INFO] data for V220 transferred to science data processing
[Tidy 12:05:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:05:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:05:19 INFO] resetting WatchDogTimer
[Status 12:05:19 INFO] Starting Set [AERI set: name W220, 6 scans, 0 angle, D16300 command]
[Ingest 12:05:19 INFO] Sending XML status message
[Status 12:05:19 INFO] Mirror angle: 0
[Mirror 12:05:20 INFO] rotating to position W
[Status 12:05:20 INFO] .SET file for ACQ96 ready
[Ingest 12:05:20 INFO] Starting acquisition
[Status 12:05:21 INFO] reading housekeeping
[Status 12:05:39 INFO] acquire complete
[Status 12:05:39 INFO] writing housekeeping
[Sequencer 12:05:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:05:39 INFO] incremented W scene to 220 completed views
[Sequencer 12:05:39 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:05:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:05:39 INFO] incremented to [AERI set: name X220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:05:39 INFO] W220.SIG(18)
[sigmove 12:05:39 DEBUG] transformed W220Ma.SPC -> W220MA.SPC
[sigmove 12:05:39 DEBUG] transformed W220Mb.SPC -> W220MB.SPC
[sigmove 12:05:39 DEBUG] transformed W220Mc.SPC -> W220MC.SPC
[sigmove 12:05:39 DEBUG] transformed W220Md.SPC -> W220MD.SPC
[sigmove 12:05:39 DEBUG] transformed W220Me.SPC -> W220ME.SPC
[sigmove 12:05:39 DEBUG] transformed W220Mf.SPC -> W220MF.SPC
[Status 12:05:39 INFO] data for W220 transferred to science data processing
[Tidy 12:05:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:05:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:05:39 INFO] resetting WatchDogTimer
[Status 12:05:40 INFO] Starting Set [AERI set: name X220, 6 scans, 0 angle, D16300 command]
[Ingest 12:05:40 INFO] Sending XML status message
[Status 12:05:40 INFO] Mirror angle: 0
[Mirror 12:05:40 INFO] rotating to position X
[Status 12:05:40 INFO] .SET file for ACQ96 ready
[Ingest 12:05:41 INFO] Starting acquisition
[Status 12:05:41 INFO] reading housekeeping
[Status 12:05:59 INFO] acquire complete
[Status 12:05:59 INFO] writing housekeeping
[Sequencer 12:05:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:05:59 INFO] incremented X scene to 220 completed views
[Sequencer 12:05:59 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:05:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:05:59 INFO] incremented to [AERI set: name Y220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:06:00 INFO] X220.SIG(18)
[sigmove 12:06:00 DEBUG] transformed X220Ma.SPC -> X220MA.SPC
[sigmove 12:06:00 DEBUG] transformed X220Mb.SPC -> X220MB.SPC
[sigmove 12:06:00 DEBUG] transformed X220Mc.SPC -> X220MC.SPC
[sigmove 12:06:00 DEBUG] transformed X220Md.SPC -> X220MD.SPC
[sigmove 12:06:00 DEBUG] transformed X220Me.SPC -> X220ME.SPC
[sigmove 12:06:00 DEBUG] transformed X220Mf.SPC -> X220MF.SPC
[Status 12:06:00 INFO] data for X220 transferred to science data processing
[Tidy 12:06:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:06:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:06:00 INFO] resetting WatchDogTimer
[Status 12:06:00 INFO] Starting Set [AERI set: name Y220, 6 scans, 0 angle, D16300 command]
[Ingest 12:06:00 INFO] Sending XML status message
[Status 12:06:00 INFO] Mirror angle: 0
[Mirror 12:06:00 INFO] rotating to position Y
[Status 12:06:01 INFO] .SET file for ACQ96 ready
[Ingest 12:06:01 INFO] Starting acquisition
[Status 12:06:01 INFO] reading housekeeping
[Status 12:06:19 INFO] acquire complete
[Status 12:06:20 INFO] writing housekeeping
[Sequencer 12:06:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:06:20 INFO] incremented Y scene to 220 completed views
[Sequencer 12:06:20 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:06:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:06:20 INFO] incremented to [AERI set: name Z220, 6 scans, 0 angle, D16300 command] set
[sigmove 12:06:20 INFO] Y220.SIG(18)
[sigmove 12:06:20 DEBUG] transformed Y220Ma.SPC -> Y220MA.SPC
[sigmove 12:06:20 DEBUG] transformed Y220Mb.SPC -> Y220MB.SPC
[sigmove 12:06:20 DEBUG] transformed Y220Mc.SPC -> Y220MC.SPC
[sigmove 12:06:20 DEBUG] transformed Y220Md.SPC -> Y220MD.SPC
[sigmove 12:06:20 DEBUG] transformed Y220Me.SPC -> Y220ME.SPC
[sigmove 12:06:20 DEBUG] transformed Y220Mf.SPC -> Y220MF.SPC
[Status 12:06:20 INFO] data for Y220 transferred to science data processing
[Tidy 12:06:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:06:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:06:20 INFO] resetting WatchDogTimer
[Status 12:06:20 INFO] Starting Set [AERI set: name Z220, 6 scans, 0 angle, D16300 command]
[Ingest 12:06:20 INFO] Sending XML status message
[Status 12:06:20 INFO] Mirror angle: 0
[Mirror 12:06:20 INFO] rotating to position Z
[Status 12:06:21 INFO] .SET file for ACQ96 ready
[Ingest 12:06:21 INFO] Starting acquisition
[Status 12:06:21 INFO] reading housekeeping
[Status 12:06:39 INFO] acquire complete
[Status 12:06:40 INFO] writing housekeeping
[Sequencer 12:06:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:06:40 INFO] incremented Z scene to 220 completed views
[Sequencer 12:06:40 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:06:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:06:40 INFO] incremented to [AERI set: name H221, 6 scans, 60 angle, D22500 command] set
[sigmove 12:06:40 INFO] Z220.SIG(18)
[sigmove 12:06:40 DEBUG] transformed Z220Ma.SPC -> Z220MA.SPC
[sigmove 12:06:40 DEBUG] transformed Z220Mb.SPC -> Z220MB.SPC
[sigmove 12:06:40 DEBUG] transformed Z220Mc.SPC -> Z220MC.SPC
[sigmove 12:06:40 DEBUG] transformed Z220Md.SPC -> Z220MD.SPC
[sigmove 12:06:40 DEBUG] transformed Z220Me.SPC -> Z220ME.SPC
[sigmove 12:06:40 DEBUG] transformed Z220Mf.SPC -> Z220MF.SPC
[Status 12:06:40 INFO] data for Z220 transferred to science data processing
[Tidy 12:06:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:06:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:06:40 INFO] resetting WatchDogTimer
[Status 12:06:40 INFO] Starting Set [AERI set: name H221, 6 scans, 60 angle, D22500 command]
[Ingest 12:06:40 INFO] Sending XML status message
[Status 12:06:40 INFO] Mirror angle: 60
[Mirror 12:06:41 INFO] rotating to position H
[Status 12:06:41 INFO] .SET file for ACQ96 ready
[Ingest 12:06:42 INFO] Starting acquisition
[Status 12:06:42 INFO] reading housekeeping
[Status 12:06:59 INFO] acquire complete
[Status 12:07:00 INFO] writing housekeeping
[Sequencer 12:07:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:07:00 INFO] incremented H scene to 221 completed views
[Sequencer 12:07:00 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:07:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:07:00 INFO] incremented to [AERI set: name A221, 6 scans, 120 angle, D28300 command] set
[sigmove 12:07:00 INFO] H221.SIG(18)
[sigmove 12:07:00 DEBUG] transformed H221Ma.SPC -> H221MA.SPC
[sigmove 12:07:00 DEBUG] transformed H221Mb.SPC -> H221MB.SPC
[sigmove 12:07:00 DEBUG] transformed H221Mc.SPC -> H221MC.SPC
[sigmove 12:07:00 DEBUG] transformed H221Md.SPC -> H221MD.SPC
[sigmove 12:07:00 DEBUG] transformed H221Me.SPC -> H221ME.SPC
[sigmove 12:07:00 DEBUG] transformed H221Mf.SPC -> H221MF.SPC
[Status 12:07:00 INFO] data for H221 transferred to science data processing
[Tidy 12:07:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:07:00 INFO] A219.FIN(19),H219.FIN(19),S219.FIN(19),T219.FIN(19),U219.FIN(19),V219.FIN(19),W219.FIN(19),X219.FIN(19),Y219.FIN(19),Z219.FIN(19),A220.FIN(19),H220.FIN(19),S220.FIN(19),T220.FIN(19),U220.FIN(19),V220.FIN(19),W220.FIN(19),X220.FIN(19),Y220.FIN(19),Z220.FIN(19)
[sigmove 12:07:00 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:07:00 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:07:04 DEBUG] done zipping
[WatchDog 12:07:04 INFO] resetting WatchDogTimer
[Status 12:07:05 INFO] Starting Set [AERI set: name A221, 6 scans, 120 angle, D28300 command]
[Ingest 12:07:05 INFO] Sending XML status message
[Status 12:07:05 INFO] Mirror angle: 120
[Mirror 12:07:05 INFO] rotating to position A
[Status 12:07:06 INFO] .SET file for ACQ96 ready
[Ingest 12:07:06 INFO] Starting acquisition
[Status 12:07:06 INFO] reading housekeeping
[Status 12:07:24 INFO] acquire complete
[Status 12:07:25 INFO] writing housekeeping
[Sequencer 12:07:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:07:25 INFO] incremented A scene to 221 completed views
[Sequencer 12:07:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:07:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:07:25 INFO] incremented to [AERI set: name S221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:07:25 INFO] A221.SIG(18)
[sigmove 12:07:25 DEBUG] transformed A221Ma.SPC -> A221MA.SPC
[sigmove 12:07:25 DEBUG] transformed A221Mb.SPC -> A221MB.SPC
[sigmove 12:07:25 DEBUG] transformed A221Mc.SPC -> A221MC.SPC
[sigmove 12:07:25 DEBUG] transformed A221Md.SPC -> A221MD.SPC
[sigmove 12:07:25 DEBUG] transformed A221Me.SPC -> A221ME.SPC
[sigmove 12:07:25 DEBUG] transformed A221Mf.SPC -> A221MF.SPC
[Status 12:07:25 INFO] data for A221 transferred to science data processing
[Tidy 12:07:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:07:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:07:25 INFO] resetting WatchDogTimer
[Status 12:07:25 INFO] Starting Set [AERI set: name S221, 6 scans, 0 angle, D16300 command]
[Ingest 12:07:25 INFO] Sending XML status message
[Status 12:07:25 INFO] Mirror angle: 0
[Mirror 12:07:25 INFO] rotating to position S
[Status 12:07:27 INFO] .SET file for ACQ96 ready
[Ingest 12:07:27 INFO] Starting acquisition
[Status 12:07:27 INFO] reading housekeeping
[Status 12:07:45 INFO] acquire complete
[Status 12:07:46 INFO] writing housekeeping
[Sequencer 12:07:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:07:46 INFO] incremented S scene to 221 completed views
[Sequencer 12:07:46 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:07:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:07:46 INFO] incremented to [AERI set: name T221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:07:46 INFO] S221.SIG(18)
[sigmove 12:07:46 DEBUG] transformed S221Ma.SPC -> S221MA.SPC
[sigmove 12:07:46 DEBUG] transformed S221Mb.SPC -> S221MB.SPC
[sigmove 12:07:46 DEBUG] transformed S221Mc.SPC -> S221MC.SPC
[sigmove 12:07:46 DEBUG] transformed S221Md.SPC -> S221MD.SPC
[sigmove 12:07:46 DEBUG] transformed S221Me.SPC -> S221ME.SPC
[sigmove 12:07:46 DEBUG] transformed S221Mf.SPC -> S221MF.SPC
[Status 12:07:46 INFO] data for S221 transferred to science data processing
[Tidy 12:07:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:07:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:07:46 INFO] resetting WatchDogTimer
[Status 12:07:46 INFO] Starting Set [AERI set: name T221, 6 scans, 0 angle, D16300 command]
[Ingest 12:07:46 INFO] Sending XML status message
[Status 12:07:46 INFO] Mirror angle: 0
[Mirror 12:07:47 INFO] rotating to position T
[Status 12:07:47 INFO] .SET file for ACQ96 ready
[Ingest 12:07:47 INFO] Starting acquisition
[Status 12:07:48 INFO] reading housekeeping
[Status 12:08:06 INFO] acquire complete
[Status 12:08:07 INFO] writing housekeeping
[Sequencer 12:08:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:08:07 INFO] incremented T scene to 221 completed views
[Sequencer 12:08:07 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:08:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:08:07 INFO] incremented to [AERI set: name U221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:08:07 INFO] T221.SIG(18)
[sigmove 12:08:07 DEBUG] transformed T221Ma.SPC -> T221MA.SPC
[sigmove 12:08:07 DEBUG] transformed T221Mb.SPC -> T221MB.SPC
[sigmove 12:08:07 DEBUG] transformed T221Mc.SPC -> T221MC.SPC
[sigmove 12:08:07 DEBUG] transformed T221Md.SPC -> T221MD.SPC
[sigmove 12:08:07 DEBUG] transformed T221Me.SPC -> T221ME.SPC
[sigmove 12:08:07 DEBUG] transformed T221Mf.SPC -> T221MF.SPC
[Status 12:08:07 INFO] data for T221 transferred to science data processing
[Tidy 12:08:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:08:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:08:07 INFO] resetting WatchDogTimer
[Status 12:08:07 INFO] Starting Set [AERI set: name U221, 6 scans, 0 angle, D16300 command]
[Ingest 12:08:07 INFO] Sending XML status message
[Status 12:08:07 INFO] Mirror angle: 0
[Mirror 12:08:07 INFO] rotating to position U
[Status 12:08:08 INFO] .SET file for ACQ96 ready
[Ingest 12:08:08 INFO] Starting acquisition
[Status 12:08:08 INFO] reading housekeeping
[Status 12:08:26 INFO] acquire complete
[Status 12:08:26 INFO] writing housekeeping
[Sequencer 12:08:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:08:26 INFO] incremented U scene to 221 completed views
[Sequencer 12:08:26 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:08:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:08:27 INFO] incremented to [AERI set: name V221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:08:27 INFO] U221.SIG(18)
[sigmove 12:08:27 DEBUG] transformed U221Ma.SPC -> U221MA.SPC
[sigmove 12:08:27 DEBUG] transformed U221Mb.SPC -> U221MB.SPC
[sigmove 12:08:27 DEBUG] transformed U221Mc.SPC -> U221MC.SPC
[sigmove 12:08:27 DEBUG] transformed U221Md.SPC -> U221MD.SPC
[sigmove 12:08:27 DEBUG] transformed U221Me.SPC -> U221ME.SPC
[sigmove 12:08:27 DEBUG] transformed U221Mf.SPC -> U221MF.SPC
[Status 12:08:27 INFO] data for U221 transferred to science data processing
[Tidy 12:08:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:08:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:08:27 INFO] resetting WatchDogTimer
[Status 12:08:27 INFO] Starting Set [AERI set: name V221, 6 scans, 0 angle, D16300 command]
[Ingest 12:08:27 INFO] Sending XML status message
[Status 12:08:27 INFO] Mirror angle: 0
[Mirror 12:08:27 INFO] rotating to position V
[Status 12:08:28 INFO] .SET file for ACQ96 ready
[Ingest 12:08:28 INFO] Starting acquisition
[Status 12:08:28 INFO] reading housekeeping
[Status 12:08:46 INFO] acquire complete
[Status 12:08:47 INFO] writing housekeeping
[Sequencer 12:08:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:08:47 INFO] incremented V scene to 221 completed views
[Sequencer 12:08:47 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:08:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:08:47 INFO] incremented to [AERI set: name W221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:08:47 INFO] V221.SIG(18)
[sigmove 12:08:47 DEBUG] transformed V221Ma.SPC -> V221MA.SPC
[sigmove 12:08:47 DEBUG] transformed V221Mb.SPC -> V221MB.SPC
[sigmove 12:08:47 DEBUG] transformed V221Mc.SPC -> V221MC.SPC
[sigmove 12:08:47 DEBUG] transformed V221Md.SPC -> V221MD.SPC
[sigmove 12:08:47 DEBUG] transformed V221Me.SPC -> V221ME.SPC
[sigmove 12:08:47 DEBUG] transformed V221Mf.SPC -> V221MF.SPC
[Status 12:08:47 INFO] data for V221 transferred to science data processing
[Tidy 12:08:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:08:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:08:47 INFO] resetting WatchDogTimer
[Status 12:08:47 INFO] Starting Set [AERI set: name W221, 6 scans, 0 angle, D16300 command]
[Ingest 12:08:47 INFO] Sending XML status message
[Status 12:08:47 INFO] Mirror angle: 0
[Mirror 12:08:47 INFO] rotating to position W
[Status 12:08:48 INFO] .SET file for ACQ96 ready
[Ingest 12:08:48 INFO] Starting acquisition
[Status 12:08:48 INFO] reading housekeeping
[Status 12:09:06 INFO] acquire complete
[Status 12:09:07 INFO] writing housekeeping
[Sequencer 12:09:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:09:07 INFO] incremented W scene to 221 completed views
[Sequencer 12:09:07 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:09:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:09:07 INFO] incremented to [AERI set: name X221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:09:07 INFO] W221.SIG(18)
[sigmove 12:09:07 DEBUG] transformed W221Ma.SPC -> W221MA.SPC
[sigmove 12:09:07 DEBUG] transformed W221Mb.SPC -> W221MB.SPC
[sigmove 12:09:07 DEBUG] transformed W221Mc.SPC -> W221MC.SPC
[sigmove 12:09:07 DEBUG] transformed W221Md.SPC -> W221MD.SPC
[sigmove 12:09:07 DEBUG] transformed W221Me.SPC -> W221ME.SPC
[sigmove 12:09:07 DEBUG] transformed W221Mf.SPC -> W221MF.SPC
[Status 12:09:07 INFO] data for W221 transferred to science data processing
[Tidy 12:09:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:09:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:09:07 INFO] resetting WatchDogTimer
[Status 12:09:07 INFO] Starting Set [AERI set: name X221, 6 scans, 0 angle, D16300 command]
[Ingest 12:09:07 INFO] Sending XML status message
[Status 12:09:07 INFO] Mirror angle: 0
[Mirror 12:09:08 INFO] rotating to position X
[Status 12:09:08 INFO] .SET file for ACQ96 ready
[Ingest 12:09:08 INFO] Starting acquisition
[Status 12:09:08 INFO] reading housekeeping
[Status 12:09:26 INFO] acquire complete
[Status 12:09:27 INFO] writing housekeeping
[Sequencer 12:09:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:09:27 INFO] incremented X scene to 221 completed views
[Sequencer 12:09:27 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:09:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:09:27 INFO] incremented to [AERI set: name Y221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:09:27 INFO] X221.SIG(18)
[sigmove 12:09:27 DEBUG] transformed X221Ma.SPC -> X221MA.SPC
[sigmove 12:09:27 DEBUG] transformed X221Mb.SPC -> X221MB.SPC
[sigmove 12:09:27 DEBUG] transformed X221Mc.SPC -> X221MC.SPC
[sigmove 12:09:27 DEBUG] transformed X221Md.SPC -> X221MD.SPC
[sigmove 12:09:27 DEBUG] transformed X221Me.SPC -> X221ME.SPC
[sigmove 12:09:27 DEBUG] transformed X221Mf.SPC -> X221MF.SPC
[Status 12:09:27 INFO] data for X221 transferred to science data processing
[Tidy 12:09:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:09:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:09:27 INFO] resetting WatchDogTimer
[Status 12:09:27 INFO] Starting Set [AERI set: name Y221, 6 scans, 0 angle, D16300 command]
[Ingest 12:09:27 INFO] Sending XML status message
[Status 12:09:27 INFO] Mirror angle: 0
[Mirror 12:09:28 INFO] rotating to position Y
[Status 12:09:28 INFO] .SET file for ACQ96 ready
[Ingest 12:09:28 INFO] Starting acquisition
[Status 12:09:29 INFO] reading housekeeping
[Status 12:09:46 INFO] acquire complete
[Status 12:09:47 INFO] writing housekeeping
[Sequencer 12:09:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:09:47 INFO] incremented Y scene to 221 completed views
[Sequencer 12:09:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:09:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:09:47 INFO] incremented to [AERI set: name Z221, 6 scans, 0 angle, D16300 command] set
[sigmove 12:09:47 INFO] Y221.SIG(18)
[sigmove 12:09:47 DEBUG] transformed Y221Ma.SPC -> Y221MA.SPC
[sigmove 12:09:47 DEBUG] transformed Y221Mb.SPC -> Y221MB.SPC
[sigmove 12:09:47 DEBUG] transformed Y221Mc.SPC -> Y221MC.SPC
[sigmove 12:09:47 DEBUG] transformed Y221Md.SPC -> Y221MD.SPC
[sigmove 12:09:47 DEBUG] transformed Y221Me.SPC -> Y221ME.SPC
[sigmove 12:09:47 DEBUG] transformed Y221Mf.SPC -> Y221MF.SPC
[Status 12:09:47 INFO] data for Y221 transferred to science data processing
[Tidy 12:09:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:09:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:09:47 INFO] resetting WatchDogTimer
[Status 12:09:48 INFO] Starting Set [AERI set: name Z221, 6 scans, 0 angle, D16300 command]
[Ingest 12:09:48 INFO] Sending XML status message
[Status 12:09:48 INFO] Mirror angle: 0
[Mirror 12:09:48 INFO] rotating to position Z
[Status 12:09:48 INFO] .SET file for ACQ96 ready
[Ingest 12:09:49 INFO] Starting acquisition
[Status 12:09:49 INFO] reading housekeeping
[Status 12:10:07 INFO] acquire complete
[Status 12:10:07 INFO] writing housekeeping
[Sequencer 12:10:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:10:07 INFO] incremented Z scene to 221 completed views
[Sequencer 12:10:07 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:10:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:10:07 INFO] incremented to [AERI set: name A222, 6 scans, 120 angle, D28300 command] set
[sigmove 12:10:07 INFO] Z221.SIG(18)
[sigmove 12:10:07 DEBUG] transformed Z221Ma.SPC -> Z221MA.SPC
[sigmove 12:10:07 DEBUG] transformed Z221Mb.SPC -> Z221MB.SPC
[sigmove 12:10:07 DEBUG] transformed Z221Mc.SPC -> Z221MC.SPC
[sigmove 12:10:07 DEBUG] transformed Z221Md.SPC -> Z221MD.SPC
[sigmove 12:10:07 DEBUG] transformed Z221Me.SPC -> Z221ME.SPC
[sigmove 12:10:07 DEBUG] transformed Z221Mf.SPC -> Z221MF.SPC
[Status 12:10:07 INFO] data for Z221 transferred to science data processing
[Tidy 12:10:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:10:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:10:07 INFO] resetting WatchDogTimer
[Status 12:10:08 INFO] Starting Set [AERI set: name A222, 6 scans, 120 angle, D28300 command]
[Ingest 12:10:08 INFO] Sending XML status message
[Status 12:10:08 INFO] Mirror angle: 120
[Mirror 12:10:08 INFO] rotating to position A
[Status 12:10:10 INFO] .SET file for ACQ96 ready
[Ingest 12:10:10 INFO] Starting acquisition
[Status 12:10:10 INFO] reading housekeeping
[Status 12:10:28 INFO] acquire complete
[Status 12:10:29 INFO] writing housekeeping
[Sequencer 12:10:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:10:29 INFO] incremented A scene to 222 completed views
[Sequencer 12:10:29 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:10:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:10:29 INFO] incremented to [AERI set: name H222, 6 scans, 60 angle, D22500 command] set
[sigmove 12:10:29 INFO] A222.SIG(18)
[sigmove 12:10:29 DEBUG] transformed A222Ma.SPC -> A222MA.SPC
[sigmove 12:10:29 DEBUG] transformed A222Mb.SPC -> A222MB.SPC
[sigmove 12:10:29 DEBUG] transformed A222Mc.SPC -> A222MC.SPC
[sigmove 12:10:29 DEBUG] transformed A222Md.SPC -> A222MD.SPC
[sigmove 12:10:29 DEBUG] transformed A222Me.SPC -> A222ME.SPC
[sigmove 12:10:29 DEBUG] transformed A222Mf.SPC -> A222MF.SPC
[Status 12:10:29 INFO] data for A222 transferred to science data processing
[Tidy 12:10:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:10:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:10:29 INFO] resetting WatchDogTimer
[Status 12:10:29 INFO] Starting Set [AERI set: name H222, 6 scans, 60 angle, D22500 command]
[Ingest 12:10:29 INFO] Sending XML status message
[Status 12:10:29 INFO] Mirror angle: 60
[Mirror 12:10:29 INFO] rotating to position H
[Status 12:10:30 INFO] .SET file for ACQ96 ready
[Ingest 12:10:31 INFO] Starting acquisition
[Status 12:10:31 INFO] reading housekeeping
[Status 12:10:48 INFO] acquire complete
[Status 12:10:49 INFO] writing housekeeping
[Sequencer 12:10:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:10:49 INFO] incremented H scene to 222 completed views
[Sequencer 12:10:49 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:10:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:10:49 INFO] incremented to [AERI set: name S222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:10:49 INFO] H222.SIG(18)
[sigmove 12:10:49 DEBUG] transformed H222Ma.SPC -> H222MA.SPC
[sigmove 12:10:49 DEBUG] transformed H222Mb.SPC -> H222MB.SPC
[sigmove 12:10:49 DEBUG] transformed H222Mc.SPC -> H222MC.SPC
[sigmove 12:10:49 DEBUG] transformed H222Md.SPC -> H222MD.SPC
[sigmove 12:10:49 DEBUG] transformed H222Me.SPC -> H222ME.SPC
[sigmove 12:10:49 DEBUG] transformed H222Mf.SPC -> H222MF.SPC
[Status 12:10:49 INFO] data for H222 transferred to science data processing
[Tidy 12:10:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:10:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:10:49 INFO] resetting WatchDogTimer
[Status 12:10:49 INFO] Starting Set [AERI set: name S222, 6 scans, 0 angle, D16300 command]
[Ingest 12:10:49 INFO] Sending XML status message
[Status 12:10:49 INFO] Mirror angle: 0
[Mirror 12:10:50 INFO] rotating to position S
[Status 12:10:51 INFO] .SET file for ACQ96 ready
[Ingest 12:10:51 INFO] Starting acquisition
[Status 12:10:51 INFO] reading housekeeping
[Status 12:11:08 INFO] acquire complete
[Status 12:11:09 INFO] writing housekeeping
[Sequencer 12:11:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:11:09 INFO] incremented S scene to 222 completed views
[Sequencer 12:11:09 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:11:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:11:09 INFO] incremented to [AERI set: name T222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:11:09 INFO] S222.SIG(18)
[sigmove 12:11:09 DEBUG] transformed S222Ma.SPC -> S222MA.SPC
[sigmove 12:11:09 DEBUG] transformed S222Mb.SPC -> S222MB.SPC
[sigmove 12:11:09 DEBUG] transformed S222Mc.SPC -> S222MC.SPC
[sigmove 12:11:09 DEBUG] transformed S222Md.SPC -> S222MD.SPC
[sigmove 12:11:09 DEBUG] transformed S222Me.SPC -> S222ME.SPC
[sigmove 12:11:09 DEBUG] transformed S222Mf.SPC -> S222MF.SPC
[Status 12:11:09 INFO] data for S222 transferred to science data processing
[Tidy 12:11:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:11:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:11:09 INFO] resetting WatchDogTimer
[Status 12:11:10 INFO] Starting Set [AERI set: name T222, 6 scans, 0 angle, D16300 command]
[Ingest 12:11:10 INFO] Sending XML status message
[Status 12:11:10 INFO] Mirror angle: 0
[Mirror 12:11:10 INFO] rotating to position T
[Status 12:11:10 INFO] .SET file for ACQ96 ready
[Ingest 12:11:10 INFO] Starting acquisition
[Status 12:11:11 INFO] reading housekeeping
[Status 12:11:29 INFO] acquire complete
[Status 12:11:29 INFO] writing housekeeping
[Sequencer 12:11:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:11:29 INFO] incremented T scene to 222 completed views
[Sequencer 12:11:29 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:11:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:11:29 INFO] incremented to [AERI set: name U222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:11:29 INFO] T222.SIG(18)
[sigmove 12:11:29 DEBUG] transformed T222Ma.SPC -> T222MA.SPC
[sigmove 12:11:29 DEBUG] transformed T222Mb.SPC -> T222MB.SPC
[sigmove 12:11:29 DEBUG] transformed T222Mc.SPC -> T222MC.SPC
[sigmove 12:11:29 DEBUG] transformed T222Md.SPC -> T222MD.SPC
[sigmove 12:11:29 DEBUG] transformed T222Me.SPC -> T222ME.SPC
[sigmove 12:11:29 DEBUG] transformed T222Mf.SPC -> T222MF.SPC
[Status 12:11:29 INFO] data for T222 transferred to science data processing
[Tidy 12:11:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:11:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:11:29 INFO] resetting WatchDogTimer
[Status 12:11:30 INFO] Starting Set [AERI set: name U222, 6 scans, 0 angle, D16300 command]
[Ingest 12:11:30 INFO] Sending XML status message
[Status 12:11:30 INFO] Mirror angle: 0
[Mirror 12:11:30 INFO] rotating to position U
[Status 12:11:30 INFO] .SET file for ACQ96 ready
[Ingest 12:11:31 INFO] Starting acquisition
[Status 12:11:31 INFO] reading housekeeping
[Status 12:11:49 INFO] acquire complete
[Status 12:11:50 INFO] writing housekeeping
[Sequencer 12:11:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:11:50 INFO] incremented U scene to 222 completed views
[Sequencer 12:11:50 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:11:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:11:50 INFO] incremented to [AERI set: name V222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:11:50 INFO] U222.SIG(18)
[sigmove 12:11:50 DEBUG] transformed U222Ma.SPC -> U222MA.SPC
[sigmove 12:11:50 DEBUG] transformed U222Mb.SPC -> U222MB.SPC
[sigmove 12:11:50 DEBUG] transformed U222Mc.SPC -> U222MC.SPC
[sigmove 12:11:50 DEBUG] transformed U222Md.SPC -> U222MD.SPC
[sigmove 12:11:50 DEBUG] transformed U222Me.SPC -> U222ME.SPC
[sigmove 12:11:50 DEBUG] transformed U222Mf.SPC -> U222MF.SPC
[Status 12:11:50 INFO] data for U222 transferred to science data processing
[Tidy 12:11:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:11:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:11:50 INFO] resetting WatchDogTimer
[Status 12:11:50 INFO] Starting Set [AERI set: name V222, 6 scans, 0 angle, D16300 command]
[Ingest 12:11:50 INFO] Sending XML status message
[Status 12:11:50 INFO] Mirror angle: 0
[Mirror 12:11:50 INFO] rotating to position V
[Status 12:11:51 INFO] .SET file for ACQ96 ready
[Ingest 12:11:51 INFO] Starting acquisition
[Status 12:11:51 INFO] reading housekeeping
[Status 12:12:09 INFO] acquire complete
[Status 12:12:10 INFO] writing housekeeping
[Sequencer 12:12:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:12:10 INFO] incremented V scene to 222 completed views
[Sequencer 12:12:10 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:12:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:12:10 INFO] incremented to [AERI set: name W222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:12:10 INFO] V222.SIG(18)
[sigmove 12:12:10 DEBUG] transformed V222Ma.SPC -> V222MA.SPC
[sigmove 12:12:10 DEBUG] transformed V222Mb.SPC -> V222MB.SPC
[sigmove 12:12:10 DEBUG] transformed V222Mc.SPC -> V222MC.SPC
[sigmove 12:12:10 DEBUG] transformed V222Md.SPC -> V222MD.SPC
[sigmove 12:12:10 DEBUG] transformed V222Me.SPC -> V222ME.SPC
[sigmove 12:12:10 DEBUG] transformed V222Mf.SPC -> V222MF.SPC
[Status 12:12:10 INFO] data for V222 transferred to science data processing
[Tidy 12:12:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:12:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:12:10 INFO] resetting WatchDogTimer
[Status 12:12:10 INFO] Starting Set [AERI set: name W222, 6 scans, 0 angle, D16300 command]
[Ingest 12:12:10 INFO] Sending XML status message
[Status 12:12:10 INFO] Mirror angle: 0
[Mirror 12:12:10 INFO] rotating to position W
[Status 12:12:11 INFO] .SET file for ACQ96 ready
[Ingest 12:12:11 INFO] Starting acquisition
[Status 12:12:11 INFO] reading housekeeping
[Status 12:12:29 INFO] acquire complete
[Status 12:12:30 INFO] writing housekeeping
[Sequencer 12:12:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:12:30 INFO] incremented W scene to 222 completed views
[Sequencer 12:12:30 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:12:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:12:30 INFO] incremented to [AERI set: name X222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:12:30 INFO] W222.SIG(18)
[sigmove 12:12:30 DEBUG] transformed W222Ma.SPC -> W222MA.SPC
[sigmove 12:12:30 DEBUG] transformed W222Mb.SPC -> W222MB.SPC
[sigmove 12:12:30 DEBUG] transformed W222Mc.SPC -> W222MC.SPC
[sigmove 12:12:30 DEBUG] transformed W222Md.SPC -> W222MD.SPC
[sigmove 12:12:30 DEBUG] transformed W222Me.SPC -> W222ME.SPC
[sigmove 12:12:30 DEBUG] transformed W222Mf.SPC -> W222MF.SPC
[Status 12:12:30 INFO] data for W222 transferred to science data processing
[Tidy 12:12:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:12:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:12:30 INFO] resetting WatchDogTimer
[Status 12:12:30 INFO] Starting Set [AERI set: name X222, 6 scans, 0 angle, D16300 command]
[Ingest 12:12:30 INFO] Sending XML status message
[Status 12:12:30 INFO] Mirror angle: 0
[Mirror 12:12:31 INFO] rotating to position X
[Status 12:12:31 INFO] .SET file for ACQ96 ready
[Ingest 12:12:31 INFO] Starting acquisition
[Status 12:12:31 INFO] reading housekeeping
[Status 12:12:49 INFO] acquire complete
[Status 12:12:50 INFO] writing housekeeping
[Sequencer 12:12:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:12:50 INFO] incremented X scene to 222 completed views
[Sequencer 12:12:50 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:12:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:12:50 INFO] incremented to [AERI set: name Y222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:12:50 INFO] X222.SIG(18)
[sigmove 12:12:50 DEBUG] transformed X222Ma.SPC -> X222MA.SPC
[sigmove 12:12:50 DEBUG] transformed X222Mb.SPC -> X222MB.SPC
[sigmove 12:12:50 DEBUG] transformed X222Mc.SPC -> X222MC.SPC
[sigmove 12:12:50 DEBUG] transformed X222Md.SPC -> X222MD.SPC
[sigmove 12:12:50 DEBUG] transformed X222Me.SPC -> X222ME.SPC
[sigmove 12:12:50 DEBUG] transformed X222Mf.SPC -> X222MF.SPC
[Status 12:12:50 INFO] data for X222 transferred to science data processing
[Tidy 12:12:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:12:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:12:50 INFO] resetting WatchDogTimer
[Status 12:12:50 INFO] Starting Set [AERI set: name Y222, 6 scans, 0 angle, D16300 command]
[Ingest 12:12:50 INFO] Sending XML status message
[Status 12:12:50 INFO] Mirror angle: 0
[Mirror 12:12:51 INFO] rotating to position Y
[Status 12:12:51 INFO] .SET file for ACQ96 ready
[Ingest 12:12:51 INFO] Starting acquisition
[Status 12:12:52 INFO] reading housekeeping
[Status 12:13:10 INFO] acquire complete
[Status 12:13:10 INFO] writing housekeeping
[Sequencer 12:13:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:13:10 INFO] incremented Y scene to 222 completed views
[Sequencer 12:13:10 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:13:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:13:10 INFO] incremented to [AERI set: name Z222, 6 scans, 0 angle, D16300 command] set
[sigmove 12:13:10 INFO] Y222.SIG(18)
[sigmove 12:13:10 DEBUG] transformed Y222Ma.SPC -> Y222MA.SPC
[sigmove 12:13:10 DEBUG] transformed Y222Mb.SPC -> Y222MB.SPC
[sigmove 12:13:10 DEBUG] transformed Y222Mc.SPC -> Y222MC.SPC
[sigmove 12:13:10 DEBUG] transformed Y222Md.SPC -> Y222MD.SPC
[sigmove 12:13:10 DEBUG] transformed Y222Me.SPC -> Y222ME.SPC
[sigmove 12:13:10 DEBUG] transformed Y222Mf.SPC -> Y222MF.SPC
[Status 12:13:10 INFO] data for Y222 transferred to science data processing
[Tidy 12:13:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:13:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:13:10 INFO] resetting WatchDogTimer
[Status 12:13:11 INFO] Starting Set [AERI set: name Z222, 6 scans, 0 angle, D16300 command]
[Ingest 12:13:11 INFO] Sending XML status message
[Status 12:13:11 INFO] Mirror angle: 0
[Mirror 12:13:11 INFO] rotating to position Z
[Status 12:13:11 INFO] .SET file for ACQ96 ready
[Ingest 12:13:12 INFO] Starting acquisition
[Status 12:13:12 INFO] reading housekeeping
[Status 12:13:30 INFO] acquire complete
[Status 12:13:31 INFO] writing housekeeping
[Sequencer 12:13:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:13:31 INFO] incremented Z scene to 222 completed views
[Sequencer 12:13:31 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:13:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:13:31 INFO] incremented to [AERI set: name H223, 6 scans, 60 angle, D22500 command] set
[sigmove 12:13:31 INFO] Z222.SIG(18)
[sigmove 12:13:31 DEBUG] transformed Z222Ma.SPC -> Z222MA.SPC
[sigmove 12:13:31 DEBUG] transformed Z222Mb.SPC -> Z222MB.SPC
[sigmove 12:13:31 DEBUG] transformed Z222Mc.SPC -> Z222MC.SPC
[sigmove 12:13:31 DEBUG] transformed Z222Md.SPC -> Z222MD.SPC
[sigmove 12:13:31 DEBUG] transformed Z222Me.SPC -> Z222ME.SPC
[sigmove 12:13:31 DEBUG] transformed Z222Mf.SPC -> Z222MF.SPC
[Status 12:13:31 INFO] data for Z222 transferred to science data processing
[Tidy 12:13:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:13:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:13:31 INFO] resetting WatchDogTimer
[Status 12:13:31 INFO] Starting Set [AERI set: name H223, 6 scans, 60 angle, D22500 command]
[Ingest 12:13:31 INFO] Sending XML status message
[Status 12:13:31 INFO] Mirror angle: 60
[Mirror 12:13:31 INFO] rotating to position H
[Status 12:13:32 INFO] .SET file for ACQ96 ready
[Ingest 12:13:32 INFO] Starting acquisition
[Status 12:13:33 INFO] reading housekeeping
[Status 12:13:50 INFO] acquire complete
[Status 12:13:51 INFO] writing housekeeping
[Sequencer 12:13:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:13:51 INFO] incremented H scene to 223 completed views
[Sequencer 12:13:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:13:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:13:51 INFO] incremented to [AERI set: name A223, 6 scans, 120 angle, D28300 command] set
[sigmove 12:13:51 INFO] H223.SIG(18)
[sigmove 12:13:51 DEBUG] transformed H223Ma.SPC -> H223MA.SPC
[sigmove 12:13:51 DEBUG] transformed H223Mb.SPC -> H223MB.SPC
[sigmove 12:13:51 DEBUG] transformed H223Mc.SPC -> H223MC.SPC
[sigmove 12:13:51 DEBUG] transformed H223Md.SPC -> H223MD.SPC
[sigmove 12:13:51 DEBUG] transformed H223Me.SPC -> H223ME.SPC
[sigmove 12:13:51 DEBUG] transformed H223Mf.SPC -> H223MF.SPC
[Status 12:13:51 INFO] data for H223 transferred to science data processing
[Tidy 12:13:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:13:51 INFO] A221.FIN(19),H221.FIN(19),S221.FIN(19),T221.FIN(19),U221.FIN(19),V221.FIN(19),W221.FIN(19),X221.FIN(19),Y221.FIN(19),Z221.FIN(19),A222.FIN(19),H222.FIN(19),S222.FIN(19),T222.FIN(19),U222.FIN(19),V222.FIN(19),W222.FIN(19),X222.FIN(19),Y222.FIN(19),Z222.FIN(19)
[sigmove 12:13:51 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:13:51 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:13:55 DEBUG] done zipping
[WatchDog 12:13:55 INFO] resetting WatchDogTimer
[Status 12:13:55 INFO] Starting Set [AERI set: name A223, 6 scans, 120 angle, D28300 command]
[Ingest 12:13:55 INFO] Sending XML status message
[Status 12:13:55 INFO] Mirror angle: 120
[Mirror 12:13:56 INFO] rotating to position A
[Status 12:13:57 INFO] .SET file for ACQ96 ready
[Ingest 12:13:57 INFO] Starting acquisition
[Status 12:13:57 INFO] reading housekeeping
[Status 12:14:15 INFO] acquire complete
[Status 12:14:15 INFO] writing housekeeping
[Sequencer 12:14:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:14:15 INFO] incremented A scene to 223 completed views
[Sequencer 12:14:15 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:14:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:14:15 INFO] incremented to [AERI set: name S223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:14:15 INFO] A223.SIG(18)
[sigmove 12:14:15 DEBUG] transformed A223Ma.SPC -> A223MA.SPC
[sigmove 12:14:15 DEBUG] transformed A223Mb.SPC -> A223MB.SPC
[sigmove 12:14:15 DEBUG] transformed A223Mc.SPC -> A223MC.SPC
[sigmove 12:14:15 DEBUG] transformed A223Md.SPC -> A223MD.SPC
[sigmove 12:14:15 DEBUG] transformed A223Me.SPC -> A223ME.SPC
[sigmove 12:14:15 DEBUG] transformed A223Mf.SPC -> A223MF.SPC
[Status 12:14:15 INFO] data for A223 transferred to science data processing
[Tidy 12:14:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:14:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:14:15 INFO] resetting WatchDogTimer
[Status 12:14:16 INFO] Starting Set [AERI set: name S223, 6 scans, 0 angle, D16300 command]
[Ingest 12:14:16 INFO] Sending XML status message
[Status 12:14:16 INFO] Mirror angle: 0
[Mirror 12:14:16 INFO] rotating to position S
[Status 12:14:17 INFO] .SET file for ACQ96 ready
[Ingest 12:14:18 INFO] Starting acquisition
[Status 12:14:18 INFO] reading housekeeping
[Status 12:14:36 INFO] acquire complete
[Status 12:14:37 INFO] writing housekeeping
[Sequencer 12:14:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:14:37 INFO] incremented S scene to 223 completed views
[Sequencer 12:14:37 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:14:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:14:37 INFO] incremented to [AERI set: name T223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:14:37 INFO] S223.SIG(18)
[sigmove 12:14:37 DEBUG] transformed S223Ma.SPC -> S223MA.SPC
[sigmove 12:14:37 DEBUG] transformed S223Mb.SPC -> S223MB.SPC
[sigmove 12:14:37 DEBUG] transformed S223Mc.SPC -> S223MC.SPC
[sigmove 12:14:37 DEBUG] transformed S223Md.SPC -> S223MD.SPC
[sigmove 12:14:37 DEBUG] transformed S223Me.SPC -> S223ME.SPC
[sigmove 12:14:37 DEBUG] transformed S223Mf.SPC -> S223MF.SPC
[Status 12:14:37 INFO] data for S223 transferred to science data processing
[Tidy 12:14:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:14:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:14:37 INFO] resetting WatchDogTimer
[Status 12:14:37 INFO] Starting Set [AERI set: name T223, 6 scans, 0 angle, D16300 command]
[Ingest 12:14:37 INFO] Sending XML status message
[Status 12:14:37 INFO] Mirror angle: 0
[Mirror 12:14:37 INFO] rotating to position T
[Status 12:14:38 INFO] .SET file for ACQ96 ready
[Ingest 12:14:38 INFO] Starting acquisition
[Status 12:14:38 INFO] reading housekeeping
[Status 12:14:56 INFO] acquire complete
[Status 12:14:57 INFO] writing housekeeping
[Sequencer 12:14:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:14:57 INFO] incremented T scene to 223 completed views
[Sequencer 12:14:57 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:14:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:14:57 INFO] incremented to [AERI set: name U223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:14:57 INFO] T223.SIG(18)
[sigmove 12:14:57 DEBUG] transformed T223Ma.SPC -> T223MA.SPC
[sigmove 12:14:57 DEBUG] transformed T223Mb.SPC -> T223MB.SPC
[sigmove 12:14:57 DEBUG] transformed T223Mc.SPC -> T223MC.SPC
[sigmove 12:14:57 DEBUG] transformed T223Md.SPC -> T223MD.SPC
[sigmove 12:14:57 DEBUG] transformed T223Me.SPC -> T223ME.SPC
[sigmove 12:14:57 DEBUG] transformed T223Mf.SPC -> T223MF.SPC
[Status 12:14:57 INFO] data for T223 transferred to science data processing
[Tidy 12:14:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:14:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:14:57 INFO] resetting WatchDogTimer
[Status 12:14:57 INFO] Starting Set [AERI set: name U223, 6 scans, 0 angle, D16300 command]
[Ingest 12:14:57 INFO] Sending XML status message
[Status 12:14:57 INFO] Mirror angle: 0
[Mirror 12:14:58 INFO] rotating to position U
[Status 12:14:58 INFO] .SET file for ACQ96 ready
[Ingest 12:14:58 INFO] Starting acquisition
[Status 12:14:58 INFO] reading housekeeping
[Status 12:15:16 INFO] acquire complete
[Status 12:15:17 INFO] writing housekeeping
[Sequencer 12:15:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:15:17 INFO] incremented U scene to 223 completed views
[Sequencer 12:15:17 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:15:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:15:17 INFO] incremented to [AERI set: name V223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:15:17 INFO] U223.SIG(18)
[sigmove 12:15:17 DEBUG] transformed U223Ma.SPC -> U223MA.SPC
[sigmove 12:15:17 DEBUG] transformed U223Mb.SPC -> U223MB.SPC
[sigmove 12:15:17 DEBUG] transformed U223Mc.SPC -> U223MC.SPC
[sigmove 12:15:17 DEBUG] transformed U223Md.SPC -> U223MD.SPC
[sigmove 12:15:17 DEBUG] transformed U223Me.SPC -> U223ME.SPC
[sigmove 12:15:17 DEBUG] transformed U223Mf.SPC -> U223MF.SPC
[Status 12:15:17 INFO] data for U223 transferred to science data processing
[Tidy 12:15:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:15:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:15:17 INFO] resetting WatchDogTimer
[Status 12:15:17 INFO] Starting Set [AERI set: name V223, 6 scans, 0 angle, D16300 command]
[Ingest 12:15:17 INFO] Sending XML status message
[Status 12:15:17 INFO] Mirror angle: 0
[Mirror 12:15:18 INFO] rotating to position V
[Status 12:15:18 INFO] .SET file for ACQ96 ready
[Ingest 12:15:18 INFO] Starting acquisition
[Status 12:15:19 INFO] reading housekeeping
[Status 12:15:37 INFO] acquire complete
[Status 12:15:37 INFO] writing housekeeping
[Sequencer 12:15:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:15:37 INFO] incremented V scene to 223 completed views
[Sequencer 12:15:37 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:15:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:15:37 INFO] incremented to [AERI set: name W223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:15:37 INFO] V223.SIG(18)
[sigmove 12:15:37 DEBUG] transformed V223Ma.SPC -> V223MA.SPC
[sigmove 12:15:37 DEBUG] transformed V223Mb.SPC -> V223MB.SPC
[sigmove 12:15:37 DEBUG] transformed V223Mc.SPC -> V223MC.SPC
[sigmove 12:15:37 DEBUG] transformed V223Md.SPC -> V223MD.SPC
[sigmove 12:15:37 DEBUG] transformed V223Me.SPC -> V223ME.SPC
[sigmove 12:15:37 DEBUG] transformed V223Mf.SPC -> V223MF.SPC
[Status 12:15:37 INFO] data for V223 transferred to science data processing
[Tidy 12:15:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:15:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:15:37 INFO] resetting WatchDogTimer
[Status 12:15:38 INFO] Starting Set [AERI set: name W223, 6 scans, 0 angle, D16300 command]
[Ingest 12:15:38 INFO] Sending XML status message
[Status 12:15:38 INFO] Mirror angle: 0
[Mirror 12:15:38 INFO] rotating to position W
[Status 12:15:38 INFO] .SET file for ACQ96 ready
[Ingest 12:15:39 INFO] Starting acquisition
[Status 12:15:39 INFO] reading housekeeping
[Status 12:15:57 INFO] acquire complete
[Status 12:15:57 INFO] writing housekeeping
[Sequencer 12:15:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:15:57 INFO] incremented W scene to 223 completed views
[Sequencer 12:15:57 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:15:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:15:57 INFO] incremented to [AERI set: name X223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:15:57 INFO] W223.SIG(18)
[sigmove 12:15:58 DEBUG] transformed W223Ma.SPC -> W223MA.SPC
[sigmove 12:15:58 DEBUG] transformed W223Mb.SPC -> W223MB.SPC
[sigmove 12:15:58 DEBUG] transformed W223Mc.SPC -> W223MC.SPC
[sigmove 12:15:58 DEBUG] transformed W223Md.SPC -> W223MD.SPC
[sigmove 12:15:58 DEBUG] transformed W223Me.SPC -> W223ME.SPC
[sigmove 12:15:58 DEBUG] transformed W223Mf.SPC -> W223MF.SPC
[Status 12:15:58 INFO] data for W223 transferred to science data processing
[Tidy 12:15:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:15:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:15:58 INFO] resetting WatchDogTimer
[Status 12:15:58 INFO] Starting Set [AERI set: name X223, 6 scans, 0 angle, D16300 command]
[Ingest 12:15:58 INFO] Sending XML status message
[Status 12:15:58 INFO] Mirror angle: 0
[Mirror 12:15:58 INFO] rotating to position X
[Status 12:15:59 INFO] .SET file for ACQ96 ready
[Ingest 12:15:59 INFO] Starting acquisition
[Status 12:15:59 INFO] reading housekeeping
[Status 12:16:17 INFO] acquire complete
[Status 12:16:18 INFO] writing housekeeping
[Sequencer 12:16:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:16:18 INFO] incremented X scene to 223 completed views
[Sequencer 12:16:18 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:16:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:16:18 INFO] incremented to [AERI set: name Y223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:16:18 INFO] X223.SIG(18)
[sigmove 12:16:18 DEBUG] transformed X223Ma.SPC -> X223MA.SPC
[sigmove 12:16:18 DEBUG] transformed X223Mb.SPC -> X223MB.SPC
[sigmove 12:16:18 DEBUG] transformed X223Mc.SPC -> X223MC.SPC
[sigmove 12:16:18 DEBUG] transformed X223Md.SPC -> X223MD.SPC
[sigmove 12:16:18 DEBUG] transformed X223Me.SPC -> X223ME.SPC
[sigmove 12:16:18 DEBUG] transformed X223Mf.SPC -> X223MF.SPC
[Status 12:16:18 INFO] data for X223 transferred to science data processing
[Tidy 12:16:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:16:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:16:18 INFO] resetting WatchDogTimer
[Status 12:16:18 INFO] Starting Set [AERI set: name Y223, 6 scans, 0 angle, D16300 command]
[Ingest 12:16:18 INFO] Sending XML status message
[Status 12:16:18 INFO] Mirror angle: 0
[Mirror 12:16:18 INFO] rotating to position Y
[Status 12:16:19 INFO] .SET file for ACQ96 ready
[Ingest 12:16:19 INFO] Starting acquisition
[Status 12:16:19 INFO] reading housekeeping
[Status 12:16:37 INFO] acquire complete
[Status 12:16:38 INFO] writing housekeeping
[Sequencer 12:16:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:16:38 INFO] incremented Y scene to 223 completed views
[Sequencer 12:16:38 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:16:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:16:38 INFO] incremented to [AERI set: name Z223, 6 scans, 0 angle, D16300 command] set
[sigmove 12:16:38 INFO] Y223.SIG(18)
[sigmove 12:16:38 DEBUG] transformed Y223Ma.SPC -> Y223MA.SPC
[sigmove 12:16:38 DEBUG] transformed Y223Mb.SPC -> Y223MB.SPC
[sigmove 12:16:38 DEBUG] transformed Y223Mc.SPC -> Y223MC.SPC
[sigmove 12:16:38 DEBUG] transformed Y223Md.SPC -> Y223MD.SPC
[sigmove 12:16:38 DEBUG] transformed Y223Me.SPC -> Y223ME.SPC
[sigmove 12:16:38 DEBUG] transformed Y223Mf.SPC -> Y223MF.SPC
[Status 12:16:38 INFO] data for Y223 transferred to science data processing
[Tidy 12:16:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:16:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:16:38 INFO] resetting WatchDogTimer
[Status 12:16:38 INFO] Starting Set [AERI set: name Z223, 6 scans, 0 angle, D16300 command]
[Ingest 12:16:38 INFO] Sending XML status message
[Status 12:16:38 INFO] Mirror angle: 0
[Mirror 12:16:39 INFO] rotating to position Z
[Status 12:16:39 INFO] .SET file for ACQ96 ready
[Ingest 12:16:39 INFO] Starting acquisition
[Status 12:16:39 INFO] reading housekeeping
[Status 12:16:57 INFO] acquire complete
[Status 12:16:58 INFO] writing housekeeping
[Sequencer 12:16:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:16:58 INFO] incremented Z scene to 223 completed views
[Sequencer 12:16:58 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:16:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:16:58 INFO] incremented to [AERI set: name A224, 6 scans, 120 angle, D28300 command] set
[sigmove 12:16:58 INFO] Z223.SIG(18)
[sigmove 12:16:58 DEBUG] transformed Z223Ma.SPC -> Z223MA.SPC
[sigmove 12:16:58 DEBUG] transformed Z223Mb.SPC -> Z223MB.SPC
[sigmove 12:16:58 DEBUG] transformed Z223Mc.SPC -> Z223MC.SPC
[sigmove 12:16:58 DEBUG] transformed Z223Md.SPC -> Z223MD.SPC
[sigmove 12:16:58 DEBUG] transformed Z223Me.SPC -> Z223ME.SPC
[sigmove 12:16:58 DEBUG] transformed Z223Mf.SPC -> Z223MF.SPC
[Status 12:16:58 INFO] data for Z223 transferred to science data processing
[Tidy 12:16:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:16:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:16:58 INFO] resetting WatchDogTimer
[Status 12:16:58 INFO] Starting Set [AERI set: name A224, 6 scans, 120 angle, D28300 command]
[Ingest 12:16:58 INFO] Sending XML status message
[Status 12:16:58 INFO] Mirror angle: 120
[Mirror 12:16:59 INFO] rotating to position A
[Status 12:17:00 INFO] .SET file for ACQ96 ready
[Ingest 12:17:00 INFO] Starting acquisition
[Status 12:17:01 INFO] reading housekeeping
[Status 12:17:19 INFO] acquire complete
[Status 12:17:19 INFO] writing housekeeping
[Sequencer 12:17:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:17:19 INFO] incremented A scene to 224 completed views
[Sequencer 12:17:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:17:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:17:19 INFO] incremented to [AERI set: name H224, 6 scans, 60 angle, D22500 command] set
[sigmove 12:17:19 INFO] A224.SIG(18)
[sigmove 12:17:19 DEBUG] transformed A224Ma.SPC -> A224MA.SPC
[sigmove 12:17:19 DEBUG] transformed A224Mb.SPC -> A224MB.SPC
[sigmove 12:17:19 DEBUG] transformed A224Mc.SPC -> A224MC.SPC
[sigmove 12:17:19 DEBUG] transformed A224Md.SPC -> A224MD.SPC
[sigmove 12:17:19 DEBUG] transformed A224Me.SPC -> A224ME.SPC
[sigmove 12:17:19 DEBUG] transformed A224Mf.SPC -> A224MF.SPC
[Status 12:17:19 INFO] data for A224 transferred to science data processing
[Tidy 12:17:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:17:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:17:19 INFO] resetting WatchDogTimer
[Status 12:17:20 INFO] Starting Set [AERI set: name H224, 6 scans, 60 angle, D22500 command]
[Ingest 12:17:20 INFO] Sending XML status message
[Status 12:17:20 INFO] Mirror angle: 60
[Mirror 12:17:20 INFO] rotating to position H
[Status 12:17:21 INFO] .SET file for ACQ96 ready
[Ingest 12:17:21 INFO] Starting acquisition
[Status 12:17:22 INFO] reading housekeeping
[Status 12:17:39 INFO] acquire complete
[Status 12:17:40 INFO] writing housekeeping
[Sequencer 12:17:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:17:40 INFO] incremented H scene to 224 completed views
[Sequencer 12:17:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:17:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:17:40 INFO] incremented to [AERI set: name S224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:17:40 INFO] H224.SIG(18)
[sigmove 12:17:40 DEBUG] transformed H224Ma.SPC -> H224MA.SPC
[sigmove 12:17:40 DEBUG] transformed H224Mb.SPC -> H224MB.SPC
[sigmove 12:17:40 DEBUG] transformed H224Mc.SPC -> H224MC.SPC
[sigmove 12:17:40 DEBUG] transformed H224Md.SPC -> H224MD.SPC
[sigmove 12:17:40 DEBUG] transformed H224Me.SPC -> H224ME.SPC
[sigmove 12:17:40 DEBUG] transformed H224Mf.SPC -> H224MF.SPC
[Status 12:17:40 INFO] data for H224 transferred to science data processing
[Tidy 12:17:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:17:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:17:40 INFO] resetting WatchDogTimer
[Status 12:17:40 INFO] Starting Set [AERI set: name S224, 6 scans, 0 angle, D16300 command]
[Ingest 12:17:40 INFO] Sending XML status message
[Status 12:17:40 INFO] Mirror angle: 0
[Mirror 12:17:40 INFO] rotating to position S
[Status 12:17:41 INFO] .SET file for ACQ96 ready
[Ingest 12:17:41 INFO] Starting acquisition
[Status 12:17:42 INFO] reading housekeeping
[Status 12:17:59 INFO] acquire complete
[Status 12:18:00 INFO] writing housekeeping
[Sequencer 12:18:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:18:00 INFO] incremented S scene to 224 completed views
[Sequencer 12:18:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:18:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:18:00 INFO] incremented to [AERI set: name T224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:18:00 INFO] S224.SIG(18)
[sigmove 12:18:00 DEBUG] transformed S224Ma.SPC -> S224MA.SPC
[sigmove 12:18:00 DEBUG] transformed S224Mb.SPC -> S224MB.SPC
[sigmove 12:18:00 DEBUG] transformed S224Mc.SPC -> S224MC.SPC
[sigmove 12:18:00 DEBUG] transformed S224Md.SPC -> S224MD.SPC
[sigmove 12:18:00 DEBUG] transformed S224Me.SPC -> S224ME.SPC
[sigmove 12:18:00 DEBUG] transformed S224Mf.SPC -> S224MF.SPC
[Status 12:18:00 INFO] data for S224 transferred to science data processing
[Tidy 12:18:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:18:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:18:00 INFO] resetting WatchDogTimer
[Status 12:18:00 INFO] Starting Set [AERI set: name T224, 6 scans, 0 angle, D16300 command]
[Ingest 12:18:00 INFO] Sending XML status message
[Status 12:18:00 INFO] Mirror angle: 0
[Mirror 12:18:00 INFO] rotating to position T
[Status 12:18:01 INFO] .SET file for ACQ96 ready
[Ingest 12:18:01 INFO] Starting acquisition
[Status 12:18:01 INFO] reading housekeeping
[Status 12:18:19 INFO] acquire complete
[Status 12:18:20 INFO] writing housekeeping
[Sequencer 12:18:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:18:20 INFO] incremented T scene to 224 completed views
[Sequencer 12:18:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:18:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:18:20 INFO] incremented to [AERI set: name U224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:18:20 INFO] T224.SIG(18)
[sigmove 12:18:20 DEBUG] transformed T224Ma.SPC -> T224MA.SPC
[sigmove 12:18:20 DEBUG] transformed T224Mb.SPC -> T224MB.SPC
[sigmove 12:18:20 DEBUG] transformed T224Mc.SPC -> T224MC.SPC
[sigmove 12:18:20 DEBUG] transformed T224Md.SPC -> T224MD.SPC
[sigmove 12:18:20 DEBUG] transformed T224Me.SPC -> T224ME.SPC
[sigmove 12:18:20 DEBUG] transformed T224Mf.SPC -> T224MF.SPC
[Status 12:18:20 INFO] data for T224 transferred to science data processing
[Tidy 12:18:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:18:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:18:20 INFO] resetting WatchDogTimer
[Status 12:18:20 INFO] Starting Set [AERI set: name U224, 6 scans, 0 angle, D16300 command]
[Ingest 12:18:20 INFO] Sending XML status message
[Status 12:18:20 INFO] Mirror angle: 0
[Mirror 12:18:21 INFO] rotating to position U
[Status 12:18:21 INFO] .SET file for ACQ96 ready
[Ingest 12:18:21 INFO] Starting acquisition
[Status 12:18:22 INFO] reading housekeeping
[Status 12:18:39 INFO] acquire complete
[Status 12:18:40 INFO] writing housekeeping
[Sequencer 12:18:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:18:40 INFO] incremented U scene to 224 completed views
[Sequencer 12:18:40 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:18:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:18:40 INFO] incremented to [AERI set: name V224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:18:40 INFO] U224.SIG(18)
[sigmove 12:18:40 DEBUG] transformed U224Ma.SPC -> U224MA.SPC
[sigmove 12:18:40 DEBUG] transformed U224Mb.SPC -> U224MB.SPC
[sigmove 12:18:40 DEBUG] transformed U224Mc.SPC -> U224MC.SPC
[sigmove 12:18:40 DEBUG] transformed U224Md.SPC -> U224MD.SPC
[sigmove 12:18:40 DEBUG] transformed U224Me.SPC -> U224ME.SPC
[sigmove 12:18:40 DEBUG] transformed U224Mf.SPC -> U224MF.SPC
[Status 12:18:40 INFO] data for U224 transferred to science data processing
[Tidy 12:18:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:18:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:18:40 INFO] resetting WatchDogTimer
[Status 12:18:40 INFO] Starting Set [AERI set: name V224, 6 scans, 0 angle, D16300 command]
[Ingest 12:18:40 INFO] Sending XML status message
[Status 12:18:40 INFO] Mirror angle: 0
[Mirror 12:18:41 INFO] rotating to position V
[Status 12:18:41 INFO] .SET file for ACQ96 ready
[Ingest 12:18:41 INFO] Starting acquisition
[Status 12:18:42 INFO] reading housekeeping
[Status 12:19:00 INFO] acquire complete
[Status 12:19:00 INFO] writing housekeeping
[Sequencer 12:19:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:19:00 INFO] incremented V scene to 224 completed views
[Sequencer 12:19:00 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:19:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:19:00 INFO] incremented to [AERI set: name W224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:19:00 INFO] V224.SIG(18)
[sigmove 12:19:00 DEBUG] transformed V224Ma.SPC -> V224MA.SPC
[sigmove 12:19:00 DEBUG] transformed V224Mb.SPC -> V224MB.SPC
[sigmove 12:19:00 DEBUG] transformed V224Mc.SPC -> V224MC.SPC
[sigmove 12:19:00 DEBUG] transformed V224Md.SPC -> V224MD.SPC
[sigmove 12:19:00 DEBUG] transformed V224Me.SPC -> V224ME.SPC
[sigmove 12:19:00 DEBUG] transformed V224Mf.SPC -> V224MF.SPC
[Status 12:19:00 INFO] data for V224 transferred to science data processing
[Tidy 12:19:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:19:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:19:00 INFO] resetting WatchDogTimer
[Status 12:19:01 INFO] Starting Set [AERI set: name W224, 6 scans, 0 angle, D16300 command]
[Ingest 12:19:01 INFO] Sending XML status message
[Status 12:19:01 INFO] Mirror angle: 0
[Mirror 12:19:01 INFO] rotating to position W
[Status 12:19:01 INFO] .SET file for ACQ96 ready
[Ingest 12:19:02 INFO] Starting acquisition
[Status 12:19:02 INFO] reading housekeeping
[Status 12:19:20 INFO] acquire complete
[Status 12:19:21 INFO] writing housekeeping
[Sequencer 12:19:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:19:21 INFO] incremented W scene to 224 completed views
[Sequencer 12:19:21 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:19:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:19:21 INFO] incremented to [AERI set: name X224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:19:21 INFO] W224.SIG(18)
[sigmove 12:19:21 DEBUG] transformed W224Ma.SPC -> W224MA.SPC
[sigmove 12:19:21 DEBUG] transformed W224Mb.SPC -> W224MB.SPC
[sigmove 12:19:21 DEBUG] transformed W224Mc.SPC -> W224MC.SPC
[sigmove 12:19:21 DEBUG] transformed W224Md.SPC -> W224MD.SPC
[sigmove 12:19:21 DEBUG] transformed W224Me.SPC -> W224ME.SPC
[sigmove 12:19:21 DEBUG] transformed W224Mf.SPC -> W224MF.SPC
[Status 12:19:21 INFO] data for W224 transferred to science data processing
[Tidy 12:19:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:19:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:19:21 INFO] resetting WatchDogTimer
[Status 12:19:21 INFO] Starting Set [AERI set: name X224, 6 scans, 0 angle, D16300 command]
[Ingest 12:19:21 INFO] Sending XML status message
[Status 12:19:21 INFO] Mirror angle: 0
[Mirror 12:19:21 INFO] rotating to position X
[Status 12:19:22 INFO] .SET file for ACQ96 ready
[Ingest 12:19:22 INFO] Starting acquisition
[Status 12:19:22 INFO] reading housekeeping
[Status 12:19:40 INFO] acquire complete
[Status 12:19:41 INFO] writing housekeeping
[Sequencer 12:19:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:19:41 INFO] incremented X scene to 224 completed views
[Sequencer 12:19:41 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:19:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:19:41 INFO] incremented to [AERI set: name Y224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:19:41 INFO] X224.SIG(18)
[sigmove 12:19:41 DEBUG] transformed X224Ma.SPC -> X224MA.SPC
[sigmove 12:19:41 DEBUG] transformed X224Mb.SPC -> X224MB.SPC
[sigmove 12:19:41 DEBUG] transformed X224Mc.SPC -> X224MC.SPC
[sigmove 12:19:41 DEBUG] transformed X224Md.SPC -> X224MD.SPC
[sigmove 12:19:41 DEBUG] transformed X224Me.SPC -> X224ME.SPC
[sigmove 12:19:41 DEBUG] transformed X224Mf.SPC -> X224MF.SPC
[Status 12:19:41 INFO] data for X224 transferred to science data processing
[Tidy 12:19:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:19:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:19:41 INFO] resetting WatchDogTimer
[Status 12:19:41 INFO] Starting Set [AERI set: name Y224, 6 scans, 0 angle, D16300 command]
[Ingest 12:19:41 INFO] Sending XML status message
[Status 12:19:41 INFO] Mirror angle: 0
[Mirror 12:19:41 INFO] rotating to position Y
[Status 12:19:42 INFO] .SET file for ACQ96 ready
[Ingest 12:19:42 INFO] Starting acquisition
[Status 12:19:42 INFO] reading housekeeping
[Status 12:20:00 INFO] acquire complete
[Status 12:20:01 INFO] writing housekeeping
[Sequencer 12:20:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:20:01 INFO] incremented Y scene to 224 completed views
[Sequencer 12:20:01 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:20:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:20:01 INFO] incremented to [AERI set: name Z224, 6 scans, 0 angle, D16300 command] set
[sigmove 12:20:01 INFO] Y224.SIG(18)
[sigmove 12:20:01 DEBUG] transformed Y224Ma.SPC -> Y224MA.SPC
[sigmove 12:20:01 DEBUG] transformed Y224Mb.SPC -> Y224MB.SPC
[sigmove 12:20:01 DEBUG] transformed Y224Mc.SPC -> Y224MC.SPC
[sigmove 12:20:01 DEBUG] transformed Y224Md.SPC -> Y224MD.SPC
[sigmove 12:20:01 DEBUG] transformed Y224Me.SPC -> Y224ME.SPC
[sigmove 12:20:01 DEBUG] transformed Y224Mf.SPC -> Y224MF.SPC
[Status 12:20:01 INFO] data for Y224 transferred to science data processing
[Tidy 12:20:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:20:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:20:01 INFO] resetting WatchDogTimer
[Status 12:20:01 INFO] Starting Set [AERI set: name Z224, 6 scans, 0 angle, D16300 command]
[Ingest 12:20:01 INFO] Sending XML status message
[Status 12:20:01 INFO] Mirror angle: 0
[Mirror 12:20:02 INFO] rotating to position Z
[Status 12:20:02 INFO] .SET file for ACQ96 ready
[Ingest 12:20:02 INFO] Starting acquisition
[Status 12:20:02 INFO] reading housekeeping
[Status 12:20:20 INFO] acquire complete
[Status 12:20:21 INFO] writing housekeeping
[Sequencer 12:20:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:20:21 INFO] incremented Z scene to 224 completed views
[Sequencer 12:20:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:20:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:20:21 INFO] incremented to [AERI set: name H225, 6 scans, 60 angle, D22500 command] set
[sigmove 12:20:21 INFO] Z224.SIG(18)
[sigmove 12:20:21 DEBUG] transformed Z224Ma.SPC -> Z224MA.SPC
[sigmove 12:20:21 DEBUG] transformed Z224Mb.SPC -> Z224MB.SPC
[sigmove 12:20:21 DEBUG] transformed Z224Mc.SPC -> Z224MC.SPC
[sigmove 12:20:21 DEBUG] transformed Z224Md.SPC -> Z224MD.SPC
[sigmove 12:20:21 DEBUG] transformed Z224Me.SPC -> Z224ME.SPC
[sigmove 12:20:21 DEBUG] transformed Z224Mf.SPC -> Z224MF.SPC
[Status 12:20:21 INFO] data for Z224 transferred to science data processing
[Tidy 12:20:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:20:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:20:21 INFO] resetting WatchDogTimer
[Status 12:20:21 INFO] Starting Set [AERI set: name H225, 6 scans, 60 angle, D22500 command]
[Ingest 12:20:21 INFO] Sending XML status message
[Status 12:20:21 INFO] Mirror angle: 60
[Mirror 12:20:22 INFO] rotating to position H
[Status 12:20:23 INFO] .SET file for ACQ96 ready
[Ingest 12:20:23 INFO] Starting acquisition
[Status 12:20:23 INFO] reading housekeeping
[Status 12:20:41 INFO] acquire complete
[Status 12:20:41 INFO] writing housekeeping
[Sequencer 12:20:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:20:41 INFO] incremented H scene to 225 completed views
[Sequencer 12:20:41 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:20:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:20:41 INFO] incremented to [AERI set: name A225, 6 scans, 120 angle, D28300 command] set
[sigmove 12:20:41 INFO] H225.SIG(18)
[sigmove 12:20:41 DEBUG] transformed H225Ma.SPC -> H225MA.SPC
[sigmove 12:20:41 DEBUG] transformed H225Mb.SPC -> H225MB.SPC
[sigmove 12:20:41 DEBUG] transformed H225Mc.SPC -> H225MC.SPC
[sigmove 12:20:41 DEBUG] transformed H225Md.SPC -> H225MD.SPC
[sigmove 12:20:41 DEBUG] transformed H225Me.SPC -> H225ME.SPC
[sigmove 12:20:41 DEBUG] transformed H225Mf.SPC -> H225MF.SPC
[Status 12:20:41 INFO] data for H225 transferred to science data processing
[Tidy 12:20:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:20:41 INFO] A223.FIN(19),H223.FIN(19),S223.FIN(19),T223.FIN(19),U223.FIN(19),V223.FIN(19),W223.FIN(19),X223.FIN(19),Y223.FIN(19),Z223.FIN(19),A224.FIN(19),H224.FIN(19),S224.FIN(19),T224.FIN(19),U224.FIN(19),V224.FIN(19),W224.FIN(19),X224.FIN(19),Y224.FIN(19),Z224.FIN(19)
[sigmove 12:20:41 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:20:41 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:20:45 DEBUG] done zipping
[WatchDog 12:20:46 INFO] resetting WatchDogTimer
[Status 12:20:46 INFO] Starting Set [AERI set: name A225, 6 scans, 120 angle, D28300 command]
[Ingest 12:20:46 INFO] Sending XML status message
[Status 12:20:46 INFO] Mirror angle: 120
[Mirror 12:20:46 INFO] rotating to position A
[Status 12:20:47 INFO] .SET file for ACQ96 ready
[Ingest 12:20:47 INFO] Starting acquisition
[Status 12:20:48 INFO] reading housekeeping
[Status 12:21:05 INFO] acquire complete
[Status 12:21:06 INFO] writing housekeeping
[Sequencer 12:21:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:21:06 INFO] incremented A scene to 225 completed views
[Sequencer 12:21:06 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:21:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:21:06 INFO] incremented to [AERI set: name S225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:21:06 INFO] A225.SIG(18)
[sigmove 12:21:06 DEBUG] transformed A225Ma.SPC -> A225MA.SPC
[sigmove 12:21:06 DEBUG] transformed A225Mb.SPC -> A225MB.SPC
[sigmove 12:21:06 DEBUG] transformed A225Mc.SPC -> A225MC.SPC
[sigmove 12:21:06 DEBUG] transformed A225Md.SPC -> A225MD.SPC
[sigmove 12:21:06 DEBUG] transformed A225Me.SPC -> A225ME.SPC
[sigmove 12:21:06 DEBUG] transformed A225Mf.SPC -> A225MF.SPC
[Status 12:21:06 INFO] data for A225 transferred to science data processing
[Tidy 12:21:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:21:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:21:06 INFO] resetting WatchDogTimer
[Status 12:21:06 INFO] Starting Set [AERI set: name S225, 6 scans, 0 angle, D16300 command]
[Ingest 12:21:06 INFO] Sending XML status message
[Status 12:21:06 INFO] Mirror angle: 0
[Mirror 12:21:07 INFO] rotating to position S
[Status 12:21:08 INFO] .SET file for ACQ96 ready
[Ingest 12:21:08 INFO] Starting acquisition
[Status 12:21:09 INFO] reading housekeeping
[Status 12:21:27 INFO] acquire complete
[Status 12:21:27 INFO] writing housekeeping
[Sequencer 12:21:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:21:27 INFO] incremented S scene to 225 completed views
[Sequencer 12:21:27 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:21:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:21:27 INFO] incremented to [AERI set: name T225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:21:27 INFO] S225.SIG(18)
[sigmove 12:21:27 DEBUG] transformed S225Ma.SPC -> S225MA.SPC
[sigmove 12:21:27 DEBUG] transformed S225Mb.SPC -> S225MB.SPC
[sigmove 12:21:28 DEBUG] transformed S225Mc.SPC -> S225MC.SPC
[sigmove 12:21:28 DEBUG] transformed S225Md.SPC -> S225MD.SPC
[sigmove 12:21:28 DEBUG] transformed S225Me.SPC -> S225ME.SPC
[sigmove 12:21:28 DEBUG] transformed S225Mf.SPC -> S225MF.SPC
[Status 12:21:28 INFO] data for S225 transferred to science data processing
[Tidy 12:21:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:21:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:21:28 INFO] resetting WatchDogTimer
[Status 12:21:28 INFO] Starting Set [AERI set: name T225, 6 scans, 0 angle, D16300 command]
[Ingest 12:21:28 INFO] Sending XML status message
[Status 12:21:28 INFO] Mirror angle: 0
[Mirror 12:21:28 INFO] rotating to position T
[Status 12:21:29 INFO] .SET file for ACQ96 ready
[Ingest 12:21:29 INFO] Starting acquisition
[Status 12:21:29 INFO] reading housekeeping
[Status 12:21:47 INFO] acquire complete
[Status 12:21:48 INFO] writing housekeeping
[Sequencer 12:21:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:21:48 INFO] incremented T scene to 225 completed views
[Sequencer 12:21:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:21:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:21:48 INFO] incremented to [AERI set: name U225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:21:48 INFO] T225.SIG(18)
[sigmove 12:21:48 DEBUG] transformed T225Ma.SPC -> T225MA.SPC
[sigmove 12:21:48 DEBUG] transformed T225Mb.SPC -> T225MB.SPC
[sigmove 12:21:48 DEBUG] transformed T225Mc.SPC -> T225MC.SPC
[sigmove 12:21:48 DEBUG] transformed T225Md.SPC -> T225MD.SPC
[sigmove 12:21:48 DEBUG] transformed T225Me.SPC -> T225ME.SPC
[sigmove 12:21:48 DEBUG] transformed T225Mf.SPC -> T225MF.SPC
[Status 12:21:48 INFO] data for T225 transferred to science data processing
[Tidy 12:21:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:21:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:21:48 INFO] resetting WatchDogTimer
[Status 12:21:48 INFO] Starting Set [AERI set: name U225, 6 scans, 0 angle, D16300 command]
[Ingest 12:21:48 INFO] Sending XML status message
[Status 12:21:48 INFO] Mirror angle: 0
[Mirror 12:21:48 INFO] rotating to position U
[Status 12:21:49 INFO] .SET file for ACQ96 ready
[Ingest 12:21:49 INFO] Starting acquisition
[Status 12:21:49 INFO] reading housekeeping
[Status 12:22:07 INFO] acquire complete
[Status 12:22:08 INFO] writing housekeeping
[Sequencer 12:22:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:22:08 INFO] incremented U scene to 225 completed views
[Sequencer 12:22:08 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:22:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:22:08 INFO] incremented to [AERI set: name V225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:22:08 INFO] U225.SIG(18)
[sigmove 12:22:08 DEBUG] transformed U225Ma.SPC -> U225MA.SPC
[sigmove 12:22:08 DEBUG] transformed U225Mb.SPC -> U225MB.SPC
[sigmove 12:22:08 DEBUG] transformed U225Mc.SPC -> U225MC.SPC
[sigmove 12:22:08 DEBUG] transformed U225Md.SPC -> U225MD.SPC
[sigmove 12:22:08 DEBUG] transformed U225Me.SPC -> U225ME.SPC
[sigmove 12:22:08 DEBUG] transformed U225Mf.SPC -> U225MF.SPC
[Status 12:22:08 INFO] data for U225 transferred to science data processing
[Tidy 12:22:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:22:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:22:08 INFO] resetting WatchDogTimer
[Status 12:22:08 INFO] Starting Set [AERI set: name V225, 6 scans, 0 angle, D16300 command]
[Ingest 12:22:08 INFO] Sending XML status message
[Status 12:22:08 INFO] Mirror angle: 0
[Mirror 12:22:08 INFO] rotating to position V
[Status 12:22:09 INFO] .SET file for ACQ96 ready
[Ingest 12:22:09 INFO] Starting acquisition
[Status 12:22:09 INFO] reading housekeeping
[Status 12:22:27 INFO] acquire complete
[Status 12:22:28 INFO] writing housekeeping
[Sequencer 12:22:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:22:28 INFO] incremented V scene to 225 completed views
[Sequencer 12:22:28 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:22:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:22:28 INFO] incremented to [AERI set: name W225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:22:28 INFO] V225.SIG(18)
[sigmove 12:22:28 DEBUG] transformed V225Ma.SPC -> V225MA.SPC
[sigmove 12:22:28 DEBUG] transformed V225Mb.SPC -> V225MB.SPC
[sigmove 12:22:28 DEBUG] transformed V225Mc.SPC -> V225MC.SPC
[sigmove 12:22:28 DEBUG] transformed V225Md.SPC -> V225MD.SPC
[sigmove 12:22:28 DEBUG] transformed V225Me.SPC -> V225ME.SPC
[sigmove 12:22:28 DEBUG] transformed V225Mf.SPC -> V225MF.SPC
[Status 12:22:28 INFO] data for V225 transferred to science data processing
[Tidy 12:22:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:22:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:22:28 INFO] resetting WatchDogTimer
[Status 12:22:28 INFO] Starting Set [AERI set: name W225, 6 scans, 0 angle, D16300 command]
[Ingest 12:22:28 INFO] Sending XML status message
[Status 12:22:28 INFO] Mirror angle: 0
[Mirror 12:22:29 INFO] rotating to position W
[Status 12:22:29 INFO] .SET file for ACQ96 ready
[Ingest 12:22:29 INFO] Starting acquisition
[Status 12:22:30 INFO] reading housekeeping
[Status 12:22:47 INFO] acquire complete
[Status 12:22:48 INFO] writing housekeeping
[Sequencer 12:22:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:22:48 INFO] incremented W scene to 225 completed views
[Sequencer 12:22:48 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:22:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:22:48 INFO] incremented to [AERI set: name X225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:22:48 INFO] W225.SIG(18)
[sigmove 12:22:48 DEBUG] transformed W225Ma.SPC -> W225MA.SPC
[sigmove 12:22:48 DEBUG] transformed W225Mb.SPC -> W225MB.SPC
[sigmove 12:22:48 DEBUG] transformed W225Mc.SPC -> W225MC.SPC
[sigmove 12:22:48 DEBUG] transformed W225Md.SPC -> W225MD.SPC
[sigmove 12:22:48 DEBUG] transformed W225Me.SPC -> W225ME.SPC
[sigmove 12:22:48 DEBUG] transformed W225Mf.SPC -> W225MF.SPC
[Status 12:22:48 INFO] data for W225 transferred to science data processing
[Tidy 12:22:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:22:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:22:48 INFO] resetting WatchDogTimer
[Status 12:22:48 INFO] Starting Set [AERI set: name X225, 6 scans, 0 angle, D16300 command]
[Ingest 12:22:48 INFO] Sending XML status message
[Status 12:22:48 INFO] Mirror angle: 0
[Mirror 12:22:49 INFO] rotating to position X
[Status 12:22:49 INFO] .SET file for ACQ96 ready
[Ingest 12:22:49 INFO] Starting acquisition
[Status 12:22:50 INFO] reading housekeeping
[Status 12:23:07 INFO] acquire complete
[Status 12:23:08 INFO] writing housekeeping
[Sequencer 12:23:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:23:08 INFO] incremented X scene to 225 completed views
[Sequencer 12:23:08 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:23:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:23:08 INFO] incremented to [AERI set: name Y225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:23:08 INFO] X225.SIG(18)
[sigmove 12:23:08 DEBUG] transformed X225Ma.SPC -> X225MA.SPC
[sigmove 12:23:08 DEBUG] transformed X225Mb.SPC -> X225MB.SPC
[sigmove 12:23:08 DEBUG] transformed X225Mc.SPC -> X225MC.SPC
[sigmove 12:23:08 DEBUG] transformed X225Md.SPC -> X225MD.SPC
[sigmove 12:23:08 DEBUG] transformed X225Me.SPC -> X225ME.SPC
[sigmove 12:23:08 DEBUG] transformed X225Mf.SPC -> X225MF.SPC
[Status 12:23:08 INFO] data for X225 transferred to science data processing
[Tidy 12:23:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:23:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:23:08 INFO] resetting WatchDogTimer
[Status 12:23:09 INFO] Starting Set [AERI set: name Y225, 6 scans, 0 angle, D16300 command]
[Ingest 12:23:09 INFO] Sending XML status message
[Status 12:23:09 INFO] Mirror angle: 0
[Mirror 12:23:09 INFO] rotating to position Y
[Status 12:23:09 INFO] .SET file for ACQ96 ready
[Ingest 12:23:10 INFO] Starting acquisition
[Status 12:23:10 INFO] reading housekeeping
[Status 12:23:28 INFO] acquire complete
[Status 12:23:29 INFO] writing housekeeping
[Sequencer 12:23:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:23:29 INFO] incremented Y scene to 225 completed views
[Sequencer 12:23:29 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:23:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:23:29 INFO] incremented to [AERI set: name Z225, 6 scans, 0 angle, D16300 command] set
[sigmove 12:23:29 INFO] Y225.SIG(18)
[sigmove 12:23:29 DEBUG] transformed Y225Ma.SPC -> Y225MA.SPC
[sigmove 12:23:29 DEBUG] transformed Y225Mb.SPC -> Y225MB.SPC
[sigmove 12:23:29 DEBUG] transformed Y225Mc.SPC -> Y225MC.SPC
[sigmove 12:23:29 DEBUG] transformed Y225Md.SPC -> Y225MD.SPC
[sigmove 12:23:29 DEBUG] transformed Y225Me.SPC -> Y225ME.SPC
[sigmove 12:23:29 DEBUG] transformed Y225Mf.SPC -> Y225MF.SPC
[Status 12:23:29 INFO] data for Y225 transferred to science data processing
[Tidy 12:23:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:23:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:23:29 INFO] resetting WatchDogTimer
[Status 12:23:29 INFO] Starting Set [AERI set: name Z225, 6 scans, 0 angle, D16300 command]
[Ingest 12:23:29 INFO] Sending XML status message
[Status 12:23:29 INFO] Mirror angle: 0
[Mirror 12:23:29 INFO] rotating to position Z
[Status 12:23:30 INFO] .SET file for ACQ96 ready
[Ingest 12:23:30 INFO] Starting acquisition
[Status 12:23:30 INFO] reading housekeeping
[Status 12:23:48 INFO] acquire complete
[Status 12:23:49 INFO] writing housekeeping
[Sequencer 12:23:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:23:49 INFO] incremented Z scene to 225 completed views
[Sequencer 12:23:49 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:23:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:23:49 INFO] incremented to [AERI set: name A226, 6 scans, 120 angle, D28300 command] set
[sigmove 12:23:49 INFO] Z225.SIG(18)
[sigmove 12:23:49 DEBUG] transformed Z225Ma.SPC -> Z225MA.SPC
[sigmove 12:23:49 DEBUG] transformed Z225Mb.SPC -> Z225MB.SPC
[sigmove 12:23:49 DEBUG] transformed Z225Mc.SPC -> Z225MC.SPC
[sigmove 12:23:49 DEBUG] transformed Z225Md.SPC -> Z225MD.SPC
[sigmove 12:23:49 DEBUG] transformed Z225Me.SPC -> Z225ME.SPC
[sigmove 12:23:49 DEBUG] transformed Z225Mf.SPC -> Z225MF.SPC
[Status 12:23:49 INFO] data for Z225 transferred to science data processing
[Tidy 12:23:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:23:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:23:49 INFO] resetting WatchDogTimer
[Status 12:23:49 INFO] Starting Set [AERI set: name A226, 6 scans, 120 angle, D28300 command]
[Ingest 12:23:49 INFO] Sending XML status message
[Status 12:23:49 INFO] Mirror angle: 120
[Mirror 12:23:49 INFO] rotating to position A
[Status 12:23:51 INFO] .SET file for ACQ96 ready
[Ingest 12:23:51 INFO] Starting acquisition
[Status 12:23:51 INFO] reading housekeeping
[Status 12:24:09 INFO] acquire complete
[Status 12:24:10 INFO] writing housekeeping
[Sequencer 12:24:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:24:10 INFO] incremented A scene to 226 completed views
[Sequencer 12:24:10 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:24:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:24:10 INFO] incremented to [AERI set: name H226, 6 scans, 60 angle, D22500 command] set
[sigmove 12:24:10 INFO] A226.SIG(18)
[sigmove 12:24:10 DEBUG] transformed A226Ma.SPC -> A226MA.SPC
[sigmove 12:24:10 DEBUG] transformed A226Mb.SPC -> A226MB.SPC
[sigmove 12:24:10 DEBUG] transformed A226Mc.SPC -> A226MC.SPC
[sigmove 12:24:10 DEBUG] transformed A226Md.SPC -> A226MD.SPC
[sigmove 12:24:10 DEBUG] transformed A226Me.SPC -> A226ME.SPC
[sigmove 12:24:10 DEBUG] transformed A226Mf.SPC -> A226MF.SPC
[Status 12:24:10 INFO] data for A226 transferred to science data processing
[Tidy 12:24:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:24:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:24:10 INFO] resetting WatchDogTimer
[Status 12:24:10 INFO] Starting Set [AERI set: name H226, 6 scans, 60 angle, D22500 command]
[Ingest 12:24:10 INFO] Sending XML status message
[Status 12:24:10 INFO] Mirror angle: 60
[Mirror 12:24:11 INFO] rotating to position H
[Status 12:24:12 INFO] .SET file for ACQ96 ready
[Ingest 12:24:12 INFO] Starting acquisition
[Status 12:24:12 INFO] reading housekeeping
[Status 12:24:29 INFO] acquire complete
[Status 12:24:30 INFO] writing housekeeping
[Sequencer 12:24:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:24:30 INFO] incremented H scene to 226 completed views
[Sequencer 12:24:30 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:24:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:24:30 INFO] incremented to [AERI set: name S226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:24:30 INFO] H226.SIG(18)
[sigmove 12:24:30 DEBUG] transformed H226Ma.SPC -> H226MA.SPC
[sigmove 12:24:30 DEBUG] transformed H226Mb.SPC -> H226MB.SPC
[sigmove 12:24:30 DEBUG] transformed H226Mc.SPC -> H226MC.SPC
[sigmove 12:24:30 DEBUG] transformed H226Md.SPC -> H226MD.SPC
[sigmove 12:24:30 DEBUG] transformed H226Me.SPC -> H226ME.SPC
[sigmove 12:24:30 DEBUG] transformed H226Mf.SPC -> H226MF.SPC
[Status 12:24:30 INFO] data for H226 transferred to science data processing
[Tidy 12:24:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:24:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:24:30 INFO] resetting WatchDogTimer
[Status 12:24:30 INFO] Starting Set [AERI set: name S226, 6 scans, 0 angle, D16300 command]
[Ingest 12:24:31 INFO] Sending XML status message
[Status 12:24:31 INFO] Mirror angle: 0
[Mirror 12:24:31 INFO] rotating to position S
[Status 12:24:32 INFO] .SET file for ACQ96 ready
[Ingest 12:24:32 INFO] Starting acquisition
[Status 12:24:32 INFO] reading housekeeping
[Status 12:24:50 INFO] acquire complete
[Status 12:24:50 INFO] writing housekeeping
[Sequencer 12:24:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:24:50 INFO] incremented S scene to 226 completed views
[Sequencer 12:24:50 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:24:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:24:50 INFO] incremented to [AERI set: name T226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:24:50 INFO] S226.SIG(18)
[sigmove 12:24:50 DEBUG] transformed S226Ma.SPC -> S226MA.SPC
[sigmove 12:24:50 DEBUG] transformed S226Mb.SPC -> S226MB.SPC
[sigmove 12:24:50 DEBUG] transformed S226Mc.SPC -> S226MC.SPC
[sigmove 12:24:50 DEBUG] transformed S226Md.SPC -> S226MD.SPC
[sigmove 12:24:50 DEBUG] transformed S226Me.SPC -> S226ME.SPC
[sigmove 12:24:50 DEBUG] transformed S226Mf.SPC -> S226MF.SPC
[Status 12:24:50 INFO] data for S226 transferred to science data processing
[Tidy 12:24:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:24:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:24:50 INFO] resetting WatchDogTimer
[Status 12:24:51 INFO] Starting Set [AERI set: name T226, 6 scans, 0 angle, D16300 command]
[Ingest 12:24:51 INFO] Sending XML status message
[Status 12:24:51 INFO] Mirror angle: 0
[Mirror 12:24:51 INFO] rotating to position T
[Status 12:24:51 INFO] .SET file for ACQ96 ready
[Ingest 12:24:52 INFO] Starting acquisition
[Status 12:24:52 INFO] reading housekeeping
[Status 12:25:10 INFO] acquire complete
[Status 12:25:11 INFO] writing housekeeping
[Sequencer 12:25:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:25:11 INFO] incremented T scene to 226 completed views
[Sequencer 12:25:11 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:25:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:25:11 INFO] incremented to [AERI set: name U226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:25:11 INFO] T226.SIG(18)
[sigmove 12:25:11 DEBUG] transformed T226Ma.SPC -> T226MA.SPC
[sigmove 12:25:11 DEBUG] transformed T226Mb.SPC -> T226MB.SPC
[sigmove 12:25:11 DEBUG] transformed T226Mc.SPC -> T226MC.SPC
[sigmove 12:25:11 DEBUG] transformed T226Md.SPC -> T226MD.SPC
[sigmove 12:25:11 DEBUG] transformed T226Me.SPC -> T226ME.SPC
[sigmove 12:25:11 DEBUG] transformed T226Mf.SPC -> T226MF.SPC
[Status 12:25:11 INFO] data for T226 transferred to science data processing
[Tidy 12:25:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:25:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:25:11 INFO] resetting WatchDogTimer
[Status 12:25:11 INFO] Starting Set [AERI set: name U226, 6 scans, 0 angle, D16300 command]
[Ingest 12:25:11 INFO] Sending XML status message
[Status 12:25:11 INFO] Mirror angle: 0
[Mirror 12:25:11 INFO] rotating to position U
[Status 12:25:12 INFO] .SET file for ACQ96 ready
[Ingest 12:25:12 INFO] Starting acquisition
[Status 12:25:12 INFO] reading housekeeping
[Status 12:25:30 INFO] acquire complete
[Status 12:25:31 INFO] writing housekeeping
[Sequencer 12:25:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:25:31 INFO] incremented U scene to 226 completed views
[Sequencer 12:25:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:25:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:25:31 INFO] incremented to [AERI set: name V226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:25:31 INFO] U226.SIG(18)
[sigmove 12:25:31 DEBUG] transformed U226Ma.SPC -> U226MA.SPC
[sigmove 12:25:31 DEBUG] transformed U226Mb.SPC -> U226MB.SPC
[sigmove 12:25:31 DEBUG] transformed U226Mc.SPC -> U226MC.SPC
[sigmove 12:25:31 DEBUG] transformed U226Md.SPC -> U226MD.SPC
[sigmove 12:25:31 DEBUG] transformed U226Me.SPC -> U226ME.SPC
[sigmove 12:25:31 DEBUG] transformed U226Mf.SPC -> U226MF.SPC
[Status 12:25:31 INFO] data for U226 transferred to science data processing
[Tidy 12:25:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:25:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:25:31 INFO] resetting WatchDogTimer
[Status 12:25:31 INFO] Starting Set [AERI set: name V226, 6 scans, 0 angle, D16300 command]
[Ingest 12:25:31 INFO] Sending XML status message
[Status 12:25:31 INFO] Mirror angle: 0
[Mirror 12:25:31 INFO] rotating to position V
[Status 12:25:32 INFO] .SET file for ACQ96 ready
[Ingest 12:25:32 INFO] Starting acquisition
[Status 12:25:32 INFO] reading housekeeping
[Status 12:25:50 INFO] acquire complete
[Status 12:25:51 INFO] writing housekeeping
[Sequencer 12:25:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:25:51 INFO] incremented V scene to 226 completed views
[Sequencer 12:25:51 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:25:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:25:51 INFO] incremented to [AERI set: name W226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:25:51 INFO] V226.SIG(18)
[sigmove 12:25:51 DEBUG] transformed V226Ma.SPC -> V226MA.SPC
[sigmove 12:25:51 DEBUG] transformed V226Mb.SPC -> V226MB.SPC
[sigmove 12:25:51 DEBUG] transformed V226Mc.SPC -> V226MC.SPC
[sigmove 12:25:51 DEBUG] transformed V226Md.SPC -> V226MD.SPC
[sigmove 12:25:51 DEBUG] transformed V226Me.SPC -> V226ME.SPC
[sigmove 12:25:51 DEBUG] transformed V226Mf.SPC -> V226MF.SPC
[Status 12:25:51 INFO] data for V226 transferred to science data processing
[Tidy 12:25:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:25:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:25:51 INFO] resetting WatchDogTimer
[Status 12:25:51 INFO] Starting Set [AERI set: name W226, 6 scans, 0 angle, D16300 command]
[Ingest 12:25:51 INFO] Sending XML status message
[Status 12:25:51 INFO] Mirror angle: 0
[Mirror 12:25:52 INFO] rotating to position W
[Status 12:25:52 INFO] .SET file for ACQ96 ready
[Ingest 12:25:52 INFO] Starting acquisition
[Status 12:25:53 INFO] reading housekeeping
[Status 12:26:10 INFO] acquire complete
[Status 12:26:11 INFO] writing housekeeping
[Sequencer 12:26:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:26:11 INFO] incremented W scene to 226 completed views
[Sequencer 12:26:11 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:26:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:26:11 INFO] incremented to [AERI set: name X226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:26:11 INFO] W226.SIG(18)
[sigmove 12:26:11 DEBUG] transformed W226Ma.SPC -> W226MA.SPC
[sigmove 12:26:11 DEBUG] transformed W226Mb.SPC -> W226MB.SPC
[sigmove 12:26:11 DEBUG] transformed W226Mc.SPC -> W226MC.SPC
[sigmove 12:26:11 DEBUG] transformed W226Md.SPC -> W226MD.SPC
[sigmove 12:26:11 DEBUG] transformed W226Me.SPC -> W226ME.SPC
[sigmove 12:26:11 DEBUG] transformed W226Mf.SPC -> W226MF.SPC
[Status 12:26:11 INFO] data for W226 transferred to science data processing
[Tidy 12:26:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:26:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:26:11 INFO] resetting WatchDogTimer
[Status 12:26:11 INFO] Starting Set [AERI set: name X226, 6 scans, 0 angle, D16300 command]
[Ingest 12:26:11 INFO] Sending XML status message
[Status 12:26:11 INFO] Mirror angle: 0
[Mirror 12:26:12 INFO] rotating to position X
[Status 12:26:12 INFO] .SET file for ACQ96 ready
[Ingest 12:26:12 INFO] Starting acquisition
[Status 12:26:13 INFO] reading housekeeping
[Status 12:26:31 INFO] acquire complete
[Status 12:26:31 INFO] writing housekeeping
[Sequencer 12:26:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:26:31 INFO] incremented X scene to 226 completed views
[Sequencer 12:26:31 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:26:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:26:31 INFO] incremented to [AERI set: name Y226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:26:31 INFO] X226.SIG(18)
[sigmove 12:26:31 DEBUG] transformed X226Ma.SPC -> X226MA.SPC
[sigmove 12:26:31 DEBUG] transformed X226Mb.SPC -> X226MB.SPC
[sigmove 12:26:31 DEBUG] transformed X226Mc.SPC -> X226MC.SPC
[sigmove 12:26:31 DEBUG] transformed X226Md.SPC -> X226MD.SPC
[sigmove 12:26:31 DEBUG] transformed X226Me.SPC -> X226ME.SPC
[sigmove 12:26:31 DEBUG] transformed X226Mf.SPC -> X226MF.SPC
[Status 12:26:31 INFO] data for X226 transferred to science data processing
[Tidy 12:26:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:26:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:26:31 INFO] resetting WatchDogTimer
[Status 12:26:32 INFO] Starting Set [AERI set: name Y226, 6 scans, 0 angle, D16300 command]
[Ingest 12:26:32 INFO] Sending XML status message
[Status 12:26:32 INFO] Mirror angle: 0
[Mirror 12:26:32 INFO] rotating to position Y
[Status 12:26:32 INFO] .SET file for ACQ96 ready
[Ingest 12:26:33 INFO] Starting acquisition
[Status 12:26:33 INFO] reading housekeeping
[Status 12:26:51 INFO] acquire complete
[Status 12:26:52 INFO] writing housekeeping
[Sequencer 12:26:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:26:52 INFO] incremented Y scene to 226 completed views
[Sequencer 12:26:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:26:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:26:52 INFO] incremented to [AERI set: name Z226, 6 scans, 0 angle, D16300 command] set
[sigmove 12:26:52 INFO] Y226.SIG(18)
[sigmove 12:26:52 DEBUG] transformed Y226Ma.SPC -> Y226MA.SPC
[sigmove 12:26:52 DEBUG] transformed Y226Mb.SPC -> Y226MB.SPC
[sigmove 12:26:52 DEBUG] transformed Y226Mc.SPC -> Y226MC.SPC
[sigmove 12:26:52 DEBUG] transformed Y226Md.SPC -> Y226MD.SPC
[sigmove 12:26:52 DEBUG] transformed Y226Me.SPC -> Y226ME.SPC
[sigmove 12:26:52 DEBUG] transformed Y226Mf.SPC -> Y226MF.SPC
[Status 12:26:52 INFO] data for Y226 transferred to science data processing
[Tidy 12:26:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:26:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:26:52 INFO] resetting WatchDogTimer
[Status 12:26:52 INFO] Starting Set [AERI set: name Z226, 6 scans, 0 angle, D16300 command]
[Ingest 12:26:52 INFO] Sending XML status message
[Status 12:26:52 INFO] Mirror angle: 0
[Mirror 12:26:52 INFO] rotating to position Z
[Status 12:26:53 INFO] .SET file for ACQ96 ready
[Ingest 12:26:53 INFO] Starting acquisition
[Status 12:26:53 INFO] reading housekeeping
[Status 12:27:11 INFO] acquire complete
[Status 12:27:12 INFO] writing housekeeping
[Sequencer 12:27:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:27:12 INFO] incremented Z scene to 226 completed views
[Sequencer 12:27:12 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:27:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:27:12 INFO] incremented to [AERI set: name H227, 6 scans, 60 angle, D22500 command] set
[sigmove 12:27:12 INFO] Z226.SIG(18)
[sigmove 12:27:12 DEBUG] transformed Z226Ma.SPC -> Z226MA.SPC
[sigmove 12:27:12 DEBUG] transformed Z226Mb.SPC -> Z226MB.SPC
[sigmove 12:27:12 DEBUG] transformed Z226Mc.SPC -> Z226MC.SPC
[sigmove 12:27:12 DEBUG] transformed Z226Md.SPC -> Z226MD.SPC
[sigmove 12:27:12 DEBUG] transformed Z226Me.SPC -> Z226ME.SPC
[sigmove 12:27:12 DEBUG] transformed Z226Mf.SPC -> Z226MF.SPC
[Status 12:27:12 INFO] data for Z226 transferred to science data processing
[Tidy 12:27:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:27:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:27:12 INFO] resetting WatchDogTimer
[Status 12:27:12 INFO] Starting Set [AERI set: name H227, 6 scans, 60 angle, D22500 command]
[Ingest 12:27:12 INFO] Sending XML status message
[Status 12:27:12 INFO] Mirror angle: 60
[Mirror 12:27:12 INFO] rotating to position H
[Status 12:27:13 INFO] .SET file for ACQ96 ready
[Ingest 12:27:14 INFO] Starting acquisition
[Status 12:27:14 INFO] reading housekeeping
[Status 12:27:31 INFO] acquire complete
[Status 12:27:32 INFO] writing housekeeping
[Sequencer 12:27:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:27:32 INFO] incremented H scene to 227 completed views
[Sequencer 12:27:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:27:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:27:32 INFO] incremented to [AERI set: name A227, 6 scans, 120 angle, D28300 command] set
[sigmove 12:27:32 INFO] H227.SIG(18)
[sigmove 12:27:32 DEBUG] transformed H227Ma.SPC -> H227MA.SPC
[sigmove 12:27:32 DEBUG] transformed H227Mb.SPC -> H227MB.SPC
[sigmove 12:27:32 DEBUG] transformed H227Mc.SPC -> H227MC.SPC
[sigmove 12:27:32 DEBUG] transformed H227Md.SPC -> H227MD.SPC
[sigmove 12:27:32 DEBUG] transformed H227Me.SPC -> H227ME.SPC
[sigmove 12:27:32 DEBUG] transformed H227Mf.SPC -> H227MF.SPC
[Status 12:27:32 INFO] data for H227 transferred to science data processing
[Tidy 12:27:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:27:32 INFO] A225.FIN(19),H225.FIN(19),S225.FIN(19),T225.FIN(19),U225.FIN(19),V225.FIN(19),W225.FIN(19),X225.FIN(19),Y225.FIN(19),Z225.FIN(19),A226.FIN(19),H226.FIN(19),S226.FIN(19),T226.FIN(19),U226.FIN(19),V226.FIN(19),W226.FIN(19),X226.FIN(19),Y226.FIN(19),Z226.FIN(19)
[sigmove 12:27:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:27:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:27:36 DEBUG] done zipping
[WatchDog 12:27:36 INFO] resetting WatchDogTimer
[Status 12:27:37 INFO] Starting Set [AERI set: name A227, 6 scans, 120 angle, D28300 command]
[Ingest 12:27:37 INFO] Sending XML status message
[Status 12:27:37 INFO] Mirror angle: 120
[Mirror 12:27:37 INFO] rotating to position A
[Status 12:27:38 INFO] .SET file for ACQ96 ready
[Ingest 12:27:38 INFO] Starting acquisition
[Status 12:27:39 INFO] reading housekeeping
[Status 12:27:56 INFO] acquire complete
[Status 12:27:57 INFO] writing housekeeping
[Sequencer 12:27:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:27:57 INFO] incremented A scene to 227 completed views
[Sequencer 12:27:57 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:27:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:27:57 INFO] incremented to [AERI set: name S227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:27:57 INFO] A227.SIG(18)
[sigmove 12:27:57 DEBUG] transformed A227Ma.SPC -> A227MA.SPC
[sigmove 12:27:57 DEBUG] transformed A227Mb.SPC -> A227MB.SPC
[sigmove 12:27:57 DEBUG] transformed A227Mc.SPC -> A227MC.SPC
[sigmove 12:27:57 DEBUG] transformed A227Md.SPC -> A227MD.SPC
[sigmove 12:27:57 DEBUG] transformed A227Me.SPC -> A227ME.SPC
[sigmove 12:27:57 DEBUG] transformed A227Mf.SPC -> A227MF.SPC
[Status 12:27:57 INFO] data for A227 transferred to science data processing
[Tidy 12:27:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:27:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:27:57 INFO] resetting WatchDogTimer
[Status 12:27:57 INFO] Starting Set [AERI set: name S227, 6 scans, 0 angle, D16300 command]
[Ingest 12:27:57 INFO] Sending XML status message
[Status 12:27:57 INFO] Mirror angle: 0
[Mirror 12:27:57 INFO] rotating to position S
[Status 12:27:59 INFO] .SET file for ACQ96 ready
[Ingest 12:27:59 INFO] Starting acquisition
[Status 12:27:59 INFO] reading housekeeping
[Status 12:28:17 INFO] acquire complete
[Status 12:28:18 INFO] writing housekeeping
[Sequencer 12:28:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:28:18 INFO] incremented S scene to 227 completed views
[Sequencer 12:28:18 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:28:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:28:18 INFO] incremented to [AERI set: name T227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:28:18 INFO] S227.SIG(18)
[sigmove 12:28:18 DEBUG] transformed S227Ma.SPC -> S227MA.SPC
[sigmove 12:28:18 DEBUG] transformed S227Mb.SPC -> S227MB.SPC
[sigmove 12:28:18 DEBUG] transformed S227Mc.SPC -> S227MC.SPC
[sigmove 12:28:18 DEBUG] transformed S227Md.SPC -> S227MD.SPC
[sigmove 12:28:18 DEBUG] transformed S227Me.SPC -> S227ME.SPC
[sigmove 12:28:18 DEBUG] transformed S227Mf.SPC -> S227MF.SPC
[Status 12:28:18 INFO] data for S227 transferred to science data processing
[Tidy 12:28:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:28:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:28:18 INFO] resetting WatchDogTimer
[Status 12:28:18 INFO] Starting Set [AERI set: name T227, 6 scans, 0 angle, D16300 command]
[Ingest 12:28:18 INFO] Sending XML status message
[Status 12:28:18 INFO] Mirror angle: 0
[Mirror 12:28:19 INFO] rotating to position T
[Status 12:28:19 INFO] .SET file for ACQ96 ready
[Ingest 12:28:19 INFO] Starting acquisition
[Status 12:28:20 INFO] reading housekeeping
[Status 12:28:37 INFO] acquire complete
[Status 12:28:38 INFO] writing housekeeping
[Sequencer 12:28:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:28:38 INFO] incremented T scene to 227 completed views
[Sequencer 12:28:38 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:28:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:28:38 INFO] incremented to [AERI set: name U227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:28:38 INFO] T227.SIG(18)
[sigmove 12:28:38 DEBUG] transformed T227Ma.SPC -> T227MA.SPC
[sigmove 12:28:38 DEBUG] transformed T227Mb.SPC -> T227MB.SPC
[sigmove 12:28:38 DEBUG] transformed T227Mc.SPC -> T227MC.SPC
[sigmove 12:28:38 DEBUG] transformed T227Md.SPC -> T227MD.SPC
[sigmove 12:28:38 DEBUG] transformed T227Me.SPC -> T227ME.SPC
[sigmove 12:28:38 DEBUG] transformed T227Mf.SPC -> T227MF.SPC
[Status 12:28:38 INFO] data for T227 transferred to science data processing
[Tidy 12:28:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:28:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:28:38 INFO] resetting WatchDogTimer
[Status 12:28:39 INFO] Starting Set [AERI set: name U227, 6 scans, 0 angle, D16300 command]
[Ingest 12:28:39 INFO] Sending XML status message
[Status 12:28:39 INFO] Mirror angle: 0
[Mirror 12:28:39 INFO] rotating to position U
[Status 12:28:39 INFO] .SET file for ACQ96 ready
[Ingest 12:28:39 INFO] Starting acquisition
[Status 12:28:40 INFO] reading housekeeping
[Status 12:28:58 INFO] acquire complete
[Status 12:28:58 INFO] writing housekeeping
[Sequencer 12:28:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:28:58 INFO] incremented U scene to 227 completed views
[Sequencer 12:28:58 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:28:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:28:58 INFO] incremented to [AERI set: name V227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:28:58 INFO] U227.SIG(18)
[sigmove 12:28:58 DEBUG] transformed U227Ma.SPC -> U227MA.SPC
[sigmove 12:28:58 DEBUG] transformed U227Mb.SPC -> U227MB.SPC
[sigmove 12:28:58 DEBUG] transformed U227Mc.SPC -> U227MC.SPC
[sigmove 12:28:58 DEBUG] transformed U227Md.SPC -> U227MD.SPC
[sigmove 12:28:58 DEBUG] transformed U227Me.SPC -> U227ME.SPC
[sigmove 12:28:58 DEBUG] transformed U227Mf.SPC -> U227MF.SPC
[Status 12:28:58 INFO] data for U227 transferred to science data processing
[Tidy 12:28:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:28:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:28:58 INFO] resetting WatchDogTimer
[Status 12:28:59 INFO] Starting Set [AERI set: name V227, 6 scans, 0 angle, D16300 command]
[Ingest 12:28:59 INFO] Sending XML status message
[Status 12:28:59 INFO] Mirror angle: 0
[Mirror 12:28:59 INFO] rotating to position V
[Status 12:28:59 INFO] .SET file for ACQ96 ready
[Ingest 12:29:00 INFO] Starting acquisition
[Status 12:29:00 INFO] reading housekeeping
[Status 12:29:18 INFO] acquire complete
[Status 12:29:19 INFO] writing housekeeping
[Sequencer 12:29:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:29:19 INFO] incremented V scene to 227 completed views
[Sequencer 12:29:19 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:29:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:29:19 INFO] incremented to [AERI set: name W227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:29:19 INFO] V227.SIG(18)
[sigmove 12:29:19 DEBUG] transformed V227Ma.SPC -> V227MA.SPC
[sigmove 12:29:19 DEBUG] transformed V227Mb.SPC -> V227MB.SPC
[sigmove 12:29:19 DEBUG] transformed V227Mc.SPC -> V227MC.SPC
[sigmove 12:29:19 DEBUG] transformed V227Md.SPC -> V227MD.SPC
[sigmove 12:29:19 DEBUG] transformed V227Me.SPC -> V227ME.SPC
[sigmove 12:29:19 DEBUG] transformed V227Mf.SPC -> V227MF.SPC
[Status 12:29:19 INFO] data for V227 transferred to science data processing
[Tidy 12:29:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:29:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:29:19 INFO] resetting WatchDogTimer
[Status 12:29:19 INFO] Starting Set [AERI set: name W227, 6 scans, 0 angle, D16300 command]
[Ingest 12:29:19 INFO] Sending XML status message
[Status 12:29:19 INFO] Mirror angle: 0
[Mirror 12:29:19 INFO] rotating to position W
[Status 12:29:20 INFO] .SET file for ACQ96 ready
[Ingest 12:29:20 INFO] Starting acquisition
[Status 12:29:20 INFO] reading housekeeping
[Status 12:29:38 INFO] acquire complete
[Status 12:29:39 INFO] writing housekeeping
[Sequencer 12:29:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:29:39 INFO] incremented W scene to 227 completed views
[Sequencer 12:29:39 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:29:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:29:39 INFO] incremented to [AERI set: name X227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:29:39 INFO] W227.SIG(18)
[sigmove 12:29:39 DEBUG] transformed W227Ma.SPC -> W227MA.SPC
[sigmove 12:29:39 DEBUG] transformed W227Mb.SPC -> W227MB.SPC
[sigmove 12:29:39 DEBUG] transformed W227Mc.SPC -> W227MC.SPC
[sigmove 12:29:39 DEBUG] transformed W227Md.SPC -> W227MD.SPC
[sigmove 12:29:39 DEBUG] transformed W227Me.SPC -> W227ME.SPC
[sigmove 12:29:39 DEBUG] transformed W227Mf.SPC -> W227MF.SPC
[Status 12:29:39 INFO] data for W227 transferred to science data processing
[Tidy 12:29:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:29:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:29:39 INFO] resetting WatchDogTimer
[Status 12:29:39 INFO] Starting Set [AERI set: name X227, 6 scans, 0 angle, D16300 command]
[Ingest 12:29:39 INFO] Sending XML status message
[Status 12:29:39 INFO] Mirror angle: 0
[Mirror 12:29:39 INFO] rotating to position X
[Status 12:29:40 INFO] .SET file for ACQ96 ready
[Ingest 12:29:40 INFO] Starting acquisition
[Status 12:29:40 INFO] reading housekeeping
[Status 12:29:58 INFO] acquire complete
[Status 12:29:59 INFO] writing housekeeping
[Sequencer 12:29:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:29:59 INFO] incremented X scene to 227 completed views
[Sequencer 12:29:59 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:29:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:29:59 INFO] incremented to [AERI set: name Y227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:29:59 INFO] X227.SIG(18)
[sigmove 12:29:59 DEBUG] transformed X227Ma.SPC -> X227MA.SPC
[sigmove 12:29:59 DEBUG] transformed X227Mb.SPC -> X227MB.SPC
[sigmove 12:29:59 DEBUG] transformed X227Mc.SPC -> X227MC.SPC
[sigmove 12:29:59 DEBUG] transformed X227Md.SPC -> X227MD.SPC
[sigmove 12:29:59 DEBUG] transformed X227Me.SPC -> X227ME.SPC
[sigmove 12:29:59 DEBUG] transformed X227Mf.SPC -> X227MF.SPC
[Status 12:29:59 INFO] data for X227 transferred to science data processing
[Tidy 12:29:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:29:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:29:59 INFO] resetting WatchDogTimer
[Status 12:29:59 INFO] Starting Set [AERI set: name Y227, 6 scans, 0 angle, D16300 command]
[Ingest 12:29:59 INFO] Sending XML status message
[Status 12:29:59 INFO] Mirror angle: 0
[Mirror 12:30:00 INFO] rotating to position Y
[Status 12:30:00 INFO] .SET file for ACQ96 ready
[Ingest 12:30:00 INFO] Starting acquisition
[Status 12:30:01 INFO] reading housekeeping
[Status 12:30:18 INFO] acquire complete
[Status 12:30:19 INFO] writing housekeeping
[Sequencer 12:30:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:30:19 INFO] incremented Y scene to 227 completed views
[Sequencer 12:30:19 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:30:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:30:19 INFO] incremented to [AERI set: name Z227, 6 scans, 0 angle, D16300 command] set
[sigmove 12:30:19 INFO] Y227.SIG(18)
[sigmove 12:30:19 DEBUG] transformed Y227Ma.SPC -> Y227MA.SPC
[sigmove 12:30:19 DEBUG] transformed Y227Mb.SPC -> Y227MB.SPC
[sigmove 12:30:19 DEBUG] transformed Y227Mc.SPC -> Y227MC.SPC
[sigmove 12:30:19 DEBUG] transformed Y227Md.SPC -> Y227MD.SPC
[sigmove 12:30:19 DEBUG] transformed Y227Me.SPC -> Y227ME.SPC
[sigmove 12:30:19 DEBUG] transformed Y227Mf.SPC -> Y227MF.SPC
[Status 12:30:19 INFO] data for Y227 transferred to science data processing
[Tidy 12:30:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:30:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:30:19 INFO] resetting WatchDogTimer
[Status 12:30:19 INFO] Starting Set [AERI set: name Z227, 6 scans, 0 angle, D16300 command]
[Ingest 12:30:19 INFO] Sending XML status message
[Status 12:30:19 INFO] Mirror angle: 0
[Mirror 12:30:20 INFO] rotating to position Z
[Status 12:30:20 INFO] .SET file for ACQ96 ready
[Ingest 12:30:20 INFO] Starting acquisition
[Status 12:30:21 INFO] reading housekeeping
[Status 12:30:39 INFO] acquire complete
[Status 12:30:39 INFO] writing housekeeping
[Sequencer 12:30:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:30:39 INFO] incremented Z scene to 227 completed views
[Sequencer 12:30:39 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:30:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:30:39 INFO] incremented to [AERI set: name A228, 6 scans, 120 angle, D28300 command] set
[sigmove 12:30:39 INFO] Z227.SIG(18)
[sigmove 12:30:39 DEBUG] transformed Z227Ma.SPC -> Z227MA.SPC
[sigmove 12:30:39 DEBUG] transformed Z227Mb.SPC -> Z227MB.SPC
[sigmove 12:30:39 DEBUG] transformed Z227Mc.SPC -> Z227MC.SPC
[sigmove 12:30:39 DEBUG] transformed Z227Md.SPC -> Z227MD.SPC
[sigmove 12:30:39 DEBUG] transformed Z227Me.SPC -> Z227ME.SPC
[sigmove 12:30:39 DEBUG] transformed Z227Mf.SPC -> Z227MF.SPC
[Status 12:30:39 INFO] data for Z227 transferred to science data processing
[Tidy 12:30:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:30:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:30:39 INFO] resetting WatchDogTimer
[Status 12:30:40 INFO] Starting Set [AERI set: name A228, 6 scans, 120 angle, D28300 command]
[Ingest 12:30:40 INFO] Sending XML status message
[Status 12:30:40 INFO] Mirror angle: 120
[Mirror 12:30:40 INFO] rotating to position A
[Status 12:30:41 INFO] .SET file for ACQ96 ready
[Ingest 12:30:42 INFO] Starting acquisition
[Status 12:30:42 INFO] reading housekeeping
[Status 12:31:00 INFO] acquire complete
[Status 12:31:01 INFO] writing housekeeping
[Sequencer 12:31:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:31:01 INFO] incremented A scene to 228 completed views
[Sequencer 12:31:01 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:31:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:31:01 INFO] incremented to [AERI set: name H228, 6 scans, 60 angle, D22500 command] set
[sigmove 12:31:01 INFO] A228.SIG(18)
[sigmove 12:31:01 DEBUG] transformed A228Ma.SPC -> A228MA.SPC
[sigmove 12:31:01 DEBUG] transformed A228Mb.SPC -> A228MB.SPC
[sigmove 12:31:01 DEBUG] transformed A228Mc.SPC -> A228MC.SPC
[sigmove 12:31:01 DEBUG] transformed A228Md.SPC -> A228MD.SPC
[sigmove 12:31:01 DEBUG] transformed A228Me.SPC -> A228ME.SPC
[sigmove 12:31:01 DEBUG] transformed A228Mf.SPC -> A228MF.SPC
[Status 12:31:01 INFO] data for A228 transferred to science data processing
[Tidy 12:31:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:31:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:31:01 INFO] resetting WatchDogTimer
[Status 12:31:01 INFO] Starting Set [AERI set: name H228, 6 scans, 60 angle, D22500 command]
[Ingest 12:31:01 INFO] Sending XML status message
[Status 12:31:01 INFO] Mirror angle: 60
[Mirror 12:31:01 INFO] rotating to position H
[Status 12:31:02 INFO] .SET file for ACQ96 ready
[Ingest 12:31:02 INFO] Starting acquisition
[Status 12:31:03 INFO] reading housekeeping
[Status 12:31:20 INFO] acquire complete
[Status 12:31:21 INFO] writing housekeeping
[Sequencer 12:31:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:31:21 INFO] incremented H scene to 228 completed views
[Sequencer 12:31:21 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:31:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:31:21 INFO] incremented to [AERI set: name S228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:31:21 INFO] H228.SIG(18)
[sigmove 12:31:21 DEBUG] transformed H228Ma.SPC -> H228MA.SPC
[sigmove 12:31:21 DEBUG] transformed H228Mb.SPC -> H228MB.SPC
[sigmove 12:31:21 DEBUG] transformed H228Mc.SPC -> H228MC.SPC
[sigmove 12:31:21 DEBUG] transformed H228Md.SPC -> H228MD.SPC
[sigmove 12:31:21 DEBUG] transformed H228Me.SPC -> H228ME.SPC
[sigmove 12:31:21 DEBUG] transformed H228Mf.SPC -> H228MF.SPC
[Status 12:31:21 INFO] data for H228 transferred to science data processing
[Tidy 12:31:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:31:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:31:21 INFO] resetting WatchDogTimer
[Status 12:31:21 INFO] Starting Set [AERI set: name S228, 6 scans, 0 angle, D16300 command]
[Ingest 12:31:21 INFO] Sending XML status message
[Status 12:31:21 INFO] Mirror angle: 0
[Mirror 12:31:21 INFO] rotating to position S
[Status 12:31:22 INFO] .SET file for ACQ96 ready
[Ingest 12:31:23 INFO] Starting acquisition
[Status 12:31:23 INFO] reading housekeeping
[Status 12:31:41 INFO] acquire complete
[Status 12:31:42 INFO] writing housekeeping
[Sequencer 12:31:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:31:42 INFO] incremented S scene to 228 completed views
[Sequencer 12:31:42 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:31:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:31:42 INFO] incremented to [AERI set: name T228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:31:42 INFO] S228.SIG(18)
[sigmove 12:31:42 DEBUG] transformed S228Ma.SPC -> S228MA.SPC
[sigmove 12:31:42 DEBUG] transformed S228Mb.SPC -> S228MB.SPC
[sigmove 12:31:42 DEBUG] transformed S228Mc.SPC -> S228MC.SPC
[sigmove 12:31:42 DEBUG] transformed S228Md.SPC -> S228MD.SPC
[sigmove 12:31:42 DEBUG] transformed S228Me.SPC -> S228ME.SPC
[sigmove 12:31:42 DEBUG] transformed S228Mf.SPC -> S228MF.SPC
[Status 12:31:42 INFO] data for S228 transferred to science data processing
[Tidy 12:31:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:31:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:31:42 INFO] resetting WatchDogTimer
[Status 12:31:43 INFO] Starting Set [AERI set: name T228, 6 scans, 0 angle, D16300 command]
[Ingest 12:31:43 INFO] Sending XML status message
[Status 12:31:43 INFO] Mirror angle: 0
[Mirror 12:31:43 INFO] rotating to position T
[Status 12:31:43 INFO] .SET file for ACQ96 ready
[Ingest 12:31:44 INFO] Starting acquisition
[Status 12:31:44 INFO] reading housekeeping
[Status 12:32:02 INFO] acquire complete
[Status 12:32:03 INFO] writing housekeeping
[Sequencer 12:32:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:32:03 INFO] incremented T scene to 228 completed views
[Sequencer 12:32:03 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:32:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:32:03 INFO] incremented to [AERI set: name U228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:32:03 INFO] T228.SIG(18)
[sigmove 12:32:03 DEBUG] transformed T228Ma.SPC -> T228MA.SPC
[sigmove 12:32:03 DEBUG] transformed T228Mb.SPC -> T228MB.SPC
[sigmove 12:32:03 DEBUG] transformed T228Mc.SPC -> T228MC.SPC
[sigmove 12:32:03 DEBUG] transformed T228Md.SPC -> T228MD.SPC
[sigmove 12:32:03 DEBUG] transformed T228Me.SPC -> T228ME.SPC
[sigmove 12:32:03 DEBUG] transformed T228Mf.SPC -> T228MF.SPC
[Status 12:32:03 INFO] data for T228 transferred to science data processing
[Tidy 12:32:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:32:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:32:03 INFO] resetting WatchDogTimer
[Status 12:32:03 INFO] Starting Set [AERI set: name U228, 6 scans, 0 angle, D16300 command]
[Ingest 12:32:03 INFO] Sending XML status message
[Status 12:32:03 INFO] Mirror angle: 0
[Mirror 12:32:04 INFO] rotating to position U
[Status 12:32:04 INFO] .SET file for ACQ96 ready
[Ingest 12:32:04 INFO] Starting acquisition
[Status 12:32:05 INFO] reading housekeeping
[Status 12:32:23 INFO] acquire complete
[Status 12:32:24 INFO] writing housekeeping
[Sequencer 12:32:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:32:24 INFO] incremented U scene to 228 completed views
[Sequencer 12:32:24 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:32:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:32:24 INFO] incremented to [AERI set: name V228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:32:24 INFO] U228.SIG(18)
[sigmove 12:32:24 DEBUG] transformed U228Ma.SPC -> U228MA.SPC
[sigmove 12:32:24 DEBUG] transformed U228Mb.SPC -> U228MB.SPC
[sigmove 12:32:24 DEBUG] transformed U228Mc.SPC -> U228MC.SPC
[sigmove 12:32:24 DEBUG] transformed U228Md.SPC -> U228MD.SPC
[sigmove 12:32:24 DEBUG] transformed U228Me.SPC -> U228ME.SPC
[sigmove 12:32:24 DEBUG] transformed U228Mf.SPC -> U228MF.SPC
[Status 12:32:24 INFO] data for U228 transferred to science data processing
[Tidy 12:32:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:32:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:32:24 INFO] resetting WatchDogTimer
[Status 12:32:24 INFO] Starting Set [AERI set: name V228, 6 scans, 0 angle, D16300 command]
[Ingest 12:32:24 INFO] Sending XML status message
[Status 12:32:24 INFO] Mirror angle: 0
[Mirror 12:32:24 INFO] rotating to position V
[Status 12:32:25 INFO] .SET file for ACQ96 ready
[Ingest 12:32:25 INFO] Starting acquisition
[Status 12:32:25 INFO] reading housekeeping
[Status 12:32:43 INFO] acquire complete
[Status 12:32:44 INFO] writing housekeeping
[Sequencer 12:32:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:32:44 INFO] incremented V scene to 228 completed views
[Sequencer 12:32:44 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:32:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:32:44 INFO] incremented to [AERI set: name W228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:32:44 INFO] V228.SIG(18)
[sigmove 12:32:44 DEBUG] transformed V228Ma.SPC -> V228MA.SPC
[sigmove 12:32:44 DEBUG] transformed V228Mb.SPC -> V228MB.SPC
[sigmove 12:32:44 DEBUG] transformed V228Mc.SPC -> V228MC.SPC
[sigmove 12:32:44 DEBUG] transformed V228Md.SPC -> V228MD.SPC
[sigmove 12:32:44 DEBUG] transformed V228Me.SPC -> V228ME.SPC
[sigmove 12:32:44 DEBUG] transformed V228Mf.SPC -> V228MF.SPC
[Status 12:32:44 INFO] data for V228 transferred to science data processing
[Tidy 12:32:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:32:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:32:44 INFO] resetting WatchDogTimer
[Status 12:32:44 INFO] Starting Set [AERI set: name W228, 6 scans, 0 angle, D16300 command]
[Ingest 12:32:44 INFO] Sending XML status message
[Status 12:32:44 INFO] Mirror angle: 0
[Mirror 12:32:45 INFO] rotating to position W
[Status 12:32:45 INFO] .SET file for ACQ96 ready
[Ingest 12:32:45 INFO] Starting acquisition
[Status 12:32:45 INFO] reading housekeeping
[Status 12:33:03 INFO] acquire complete
[Status 12:33:04 INFO] writing housekeeping
[Sequencer 12:33:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:33:04 INFO] incremented W scene to 228 completed views
[Sequencer 12:33:04 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:33:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:33:04 INFO] incremented to [AERI set: name X228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:33:04 INFO] W228.SIG(18)
[sigmove 12:33:04 DEBUG] transformed W228Ma.SPC -> W228MA.SPC
[sigmove 12:33:04 DEBUG] transformed W228Mb.SPC -> W228MB.SPC
[sigmove 12:33:04 DEBUG] transformed W228Mc.SPC -> W228MC.SPC
[sigmove 12:33:04 DEBUG] transformed W228Md.SPC -> W228MD.SPC
[sigmove 12:33:04 DEBUG] transformed W228Me.SPC -> W228ME.SPC
[sigmove 12:33:04 DEBUG] transformed W228Mf.SPC -> W228MF.SPC
[Status 12:33:04 INFO] data for W228 transferred to science data processing
[Tidy 12:33:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:33:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:33:04 INFO] resetting WatchDogTimer
[Status 12:33:04 INFO] Starting Set [AERI set: name X228, 6 scans, 0 angle, D16300 command]
[Ingest 12:33:04 INFO] Sending XML status message
[Status 12:33:04 INFO] Mirror angle: 0
[Mirror 12:33:05 INFO] rotating to position X
[Status 12:33:05 INFO] .SET file for ACQ96 ready
[Ingest 12:33:05 INFO] Starting acquisition
[Status 12:33:06 INFO] reading housekeeping
[Status 12:33:23 INFO] acquire complete
[Status 12:33:24 INFO] writing housekeeping
[Sequencer 12:33:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:33:24 INFO] incremented X scene to 228 completed views
[Sequencer 12:33:24 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:33:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:33:24 INFO] incremented to [AERI set: name Y228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:33:24 INFO] X228.SIG(18)
[sigmove 12:33:24 DEBUG] transformed X228Ma.SPC -> X228MA.SPC
[sigmove 12:33:24 DEBUG] transformed X228Mb.SPC -> X228MB.SPC
[sigmove 12:33:24 DEBUG] transformed X228Mc.SPC -> X228MC.SPC
[sigmove 12:33:24 DEBUG] transformed X228Md.SPC -> X228MD.SPC
[sigmove 12:33:24 DEBUG] transformed X228Me.SPC -> X228ME.SPC
[sigmove 12:33:24 DEBUG] transformed X228Mf.SPC -> X228MF.SPC
[Status 12:33:24 INFO] data for X228 transferred to science data processing
[Tidy 12:33:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:33:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:33:24 INFO] resetting WatchDogTimer
[Status 12:33:25 INFO] Starting Set [AERI set: name Y228, 6 scans, 0 angle, D16300 command]
[Ingest 12:33:25 INFO] Sending XML status message
[Status 12:33:25 INFO] Mirror angle: 0
[Mirror 12:33:25 INFO] rotating to position Y
[Status 12:33:25 INFO] .SET file for ACQ96 ready
[Ingest 12:33:26 INFO] Starting acquisition
[Status 12:33:26 INFO] reading housekeeping
[Status 12:33:44 INFO] acquire complete
[Status 12:33:44 INFO] writing housekeeping
[Sequencer 12:33:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:33:44 INFO] incremented Y scene to 228 completed views
[Sequencer 12:33:44 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:33:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:33:44 INFO] incremented to [AERI set: name Z228, 6 scans, 0 angle, D16300 command] set
[sigmove 12:33:44 INFO] Y228.SIG(18)
[sigmove 12:33:44 DEBUG] transformed Y228Ma.SPC -> Y228MA.SPC
[sigmove 12:33:44 DEBUG] transformed Y228Mb.SPC -> Y228MB.SPC
[sigmove 12:33:44 DEBUG] transformed Y228Mc.SPC -> Y228MC.SPC
[sigmove 12:33:44 DEBUG] transformed Y228Md.SPC -> Y228MD.SPC
[sigmove 12:33:44 DEBUG] transformed Y228Me.SPC -> Y228ME.SPC
[sigmove 12:33:44 DEBUG] transformed Y228Mf.SPC -> Y228MF.SPC
[Status 12:33:44 INFO] data for Y228 transferred to science data processing
[Tidy 12:33:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:33:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:33:44 INFO] resetting WatchDogTimer
[Status 12:33:45 INFO] Starting Set [AERI set: name Z228, 6 scans, 0 angle, D16300 command]
[Ingest 12:33:45 INFO] Sending XML status message
[Status 12:33:45 INFO] Mirror angle: 0
[Mirror 12:33:45 INFO] rotating to position Z
[Status 12:33:46 INFO] .SET file for ACQ96 ready
[Ingest 12:33:46 INFO] Starting acquisition
[Status 12:33:46 INFO] reading housekeeping
[Status 12:34:04 INFO] acquire complete
[Status 12:34:05 INFO] writing housekeeping
[Sequencer 12:34:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:34:05 INFO] incremented Z scene to 228 completed views
[Sequencer 12:34:05 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:34:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:34:05 INFO] incremented to [AERI set: name H229, 6 scans, 60 angle, D22500 command] set
[sigmove 12:34:05 INFO] Z228.SIG(18)
[sigmove 12:34:05 DEBUG] transformed Z228Ma.SPC -> Z228MA.SPC
[sigmove 12:34:05 DEBUG] transformed Z228Mb.SPC -> Z228MB.SPC
[sigmove 12:34:05 DEBUG] transformed Z228Mc.SPC -> Z228MC.SPC
[sigmove 12:34:05 DEBUG] transformed Z228Md.SPC -> Z228MD.SPC
[sigmove 12:34:05 DEBUG] transformed Z228Me.SPC -> Z228ME.SPC
[sigmove 12:34:05 DEBUG] transformed Z228Mf.SPC -> Z228MF.SPC
[Status 12:34:05 INFO] data for Z228 transferred to science data processing
[Tidy 12:34:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:34:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:34:05 INFO] resetting WatchDogTimer
[Status 12:34:05 INFO] Starting Set [AERI set: name H229, 6 scans, 60 angle, D22500 command]
[Ingest 12:34:05 INFO] Sending XML status message
[Status 12:34:05 INFO] Mirror angle: 60
[Mirror 12:34:05 INFO] rotating to position H
[Status 12:34:06 INFO] .SET file for ACQ96 ready
[Ingest 12:34:06 INFO] Starting acquisition
[Status 12:34:07 INFO] reading housekeeping
[Status 12:34:24 INFO] acquire complete
[Status 12:34:25 INFO] writing housekeeping
[Sequencer 12:34:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:34:25 INFO] incremented H scene to 229 completed views
[Sequencer 12:34:25 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:34:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:34:25 INFO] incremented to [AERI set: name A229, 6 scans, 120 angle, D28300 command] set
[sigmove 12:34:25 INFO] H229.SIG(18)
[sigmove 12:34:25 DEBUG] transformed H229Ma.SPC -> H229MA.SPC
[sigmove 12:34:25 DEBUG] transformed H229Mb.SPC -> H229MB.SPC
[sigmove 12:34:25 DEBUG] transformed H229Mc.SPC -> H229MC.SPC
[sigmove 12:34:25 DEBUG] transformed H229Md.SPC -> H229MD.SPC
[sigmove 12:34:25 DEBUG] transformed H229Me.SPC -> H229ME.SPC
[sigmove 12:34:25 DEBUG] transformed H229Mf.SPC -> H229MF.SPC
[Status 12:34:25 INFO] data for H229 transferred to science data processing
[Tidy 12:34:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:34:25 INFO] A227.FIN(19),H227.FIN(19),S227.FIN(19),T227.FIN(19),U227.FIN(19),V227.FIN(19),W227.FIN(19),X227.FIN(19),Y227.FIN(19),Z227.FIN(19),A228.FIN(19),H228.FIN(19),S228.FIN(19),T228.FIN(19),U228.FIN(19),V228.FIN(19),W228.FIN(19),X228.FIN(19),Y228.FIN(19),Z228.FIN(19)
[sigmove 12:34:25 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:34:25 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:34:29 DEBUG] done zipping
[WatchDog 12:34:29 INFO] resetting WatchDogTimer
[Status 12:34:29 INFO] Starting Set [AERI set: name A229, 6 scans, 120 angle, D28300 command]
[Ingest 12:34:30 INFO] Sending XML status message
[Status 12:34:30 INFO] Mirror angle: 120
[Mirror 12:34:30 INFO] rotating to position A
[Status 12:34:31 INFO] .SET file for ACQ96 ready
[Ingest 12:34:31 INFO] Starting acquisition
[Status 12:34:31 INFO] reading housekeeping
[Status 12:34:49 INFO] acquire complete
[Status 12:34:50 INFO] writing housekeeping
[Sequencer 12:34:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:34:50 INFO] incremented A scene to 229 completed views
[Sequencer 12:34:50 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:34:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:34:50 INFO] incremented to [AERI set: name S229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:34:50 INFO] A229.SIG(18)
[sigmove 12:34:50 DEBUG] transformed A229Ma.SPC -> A229MA.SPC
[sigmove 12:34:50 DEBUG] transformed A229Mb.SPC -> A229MB.SPC
[sigmove 12:34:50 DEBUG] transformed A229Mc.SPC -> A229MC.SPC
[sigmove 12:34:50 DEBUG] transformed A229Md.SPC -> A229MD.SPC
[sigmove 12:34:50 DEBUG] transformed A229Me.SPC -> A229ME.SPC
[sigmove 12:34:50 DEBUG] transformed A229Mf.SPC -> A229MF.SPC
[Status 12:34:50 INFO] data for A229 transferred to science data processing
[Tidy 12:34:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:34:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:34:50 INFO] resetting WatchDogTimer
[Status 12:34:50 INFO] Starting Set [AERI set: name S229, 6 scans, 0 angle, D16300 command]
[Ingest 12:34:50 INFO] Sending XML status message
[Status 12:34:50 INFO] Mirror angle: 0
[Mirror 12:34:50 INFO] rotating to position S
[Status 12:34:52 INFO] .SET file for ACQ96 ready
[Ingest 12:34:52 INFO] Starting acquisition
[Status 12:34:52 INFO] reading housekeeping
[Status 12:35:10 INFO] acquire complete
[Status 12:35:11 INFO] writing housekeeping
[Sequencer 12:35:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:35:11 INFO] incremented S scene to 229 completed views
[Sequencer 12:35:11 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:35:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:35:11 INFO] incremented to [AERI set: name T229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:35:11 INFO] S229.SIG(18)
[sigmove 12:35:11 DEBUG] transformed S229Ma.SPC -> S229MA.SPC
[sigmove 12:35:11 DEBUG] transformed S229Mb.SPC -> S229MB.SPC
[sigmove 12:35:11 DEBUG] transformed S229Mc.SPC -> S229MC.SPC
[sigmove 12:35:11 DEBUG] transformed S229Md.SPC -> S229MD.SPC
[sigmove 12:35:11 DEBUG] transformed S229Me.SPC -> S229ME.SPC
[sigmove 12:35:11 DEBUG] transformed S229Mf.SPC -> S229MF.SPC
[Status 12:35:11 INFO] data for S229 transferred to science data processing
[Tidy 12:35:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:35:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:35:11 INFO] resetting WatchDogTimer
[Status 12:35:11 INFO] Starting Set [AERI set: name T229, 6 scans, 0 angle, D16300 command]
[Ingest 12:35:11 INFO] Sending XML status message
[Status 12:35:11 INFO] Mirror angle: 0
[Mirror 12:35:11 INFO] rotating to position T
[Status 12:35:12 INFO] .SET file for ACQ96 ready
[Ingest 12:35:12 INFO] Starting acquisition
[Status 12:35:12 INFO] reading housekeeping
[Status 12:35:30 INFO] acquire complete
[Status 12:35:31 INFO] writing housekeeping
[Sequencer 12:35:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:35:31 INFO] incremented T scene to 229 completed views
[Sequencer 12:35:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:35:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:35:31 INFO] incremented to [AERI set: name U229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:35:31 INFO] T229.SIG(18)
[sigmove 12:35:31 DEBUG] transformed T229Ma.SPC -> T229MA.SPC
[sigmove 12:35:31 DEBUG] transformed T229Mb.SPC -> T229MB.SPC
[sigmove 12:35:31 DEBUG] transformed T229Mc.SPC -> T229MC.SPC
[sigmove 12:35:31 DEBUG] transformed T229Md.SPC -> T229MD.SPC
[sigmove 12:35:31 DEBUG] transformed T229Me.SPC -> T229ME.SPC
[sigmove 12:35:31 DEBUG] transformed T229Mf.SPC -> T229MF.SPC
[Status 12:35:31 INFO] data for T229 transferred to science data processing
[Tidy 12:35:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:35:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:35:31 INFO] resetting WatchDogTimer
[Status 12:35:31 INFO] Starting Set [AERI set: name U229, 6 scans, 0 angle, D16300 command]
[Ingest 12:35:31 INFO] Sending XML status message
[Status 12:35:31 INFO] Mirror angle: 0
[Mirror 12:35:32 INFO] rotating to position U
[Status 12:35:32 INFO] .SET file for ACQ96 ready
[Ingest 12:35:32 INFO] Starting acquisition
[Status 12:35:33 INFO] reading housekeeping
[Status 12:35:50 INFO] acquire complete
[Status 12:35:52 INFO] writing housekeeping
[Sequencer 12:35:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:35:52 INFO] incremented U scene to 229 completed views
[Sequencer 12:35:52 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:35:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:35:52 INFO] incremented to [AERI set: name V229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:35:52 INFO] U229.SIG(18)
[sigmove 12:35:52 DEBUG] transformed U229Ma.SPC -> U229MA.SPC
[sigmove 12:35:52 DEBUG] transformed U229Mb.SPC -> U229MB.SPC
[sigmove 12:35:52 DEBUG] transformed U229Mc.SPC -> U229MC.SPC
[sigmove 12:35:52 DEBUG] transformed U229Md.SPC -> U229MD.SPC
[sigmove 12:35:52 DEBUG] transformed U229Me.SPC -> U229ME.SPC
[sigmove 12:35:52 DEBUG] transformed U229Mf.SPC -> U229MF.SPC
[Status 12:35:52 INFO] data for U229 transferred to science data processing
[Tidy 12:35:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:35:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:35:52 INFO] resetting WatchDogTimer
[Status 12:35:52 INFO] Starting Set [AERI set: name V229, 6 scans, 0 angle, D16300 command]
[Ingest 12:35:52 INFO] Sending XML status message
[Status 12:35:52 INFO] Mirror angle: 0
[Mirror 12:35:52 INFO] rotating to position V
[Status 12:35:53 INFO] .SET file for ACQ96 ready
[Ingest 12:35:53 INFO] Starting acquisition
[Status 12:35:53 INFO] reading housekeeping
[Status 12:36:11 INFO] acquire complete
[Status 12:36:11 INFO] writing housekeeping
[Sequencer 12:36:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:36:11 INFO] incremented V scene to 229 completed views
[Sequencer 12:36:11 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:36:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:36:11 INFO] incremented to [AERI set: name W229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:36:11 INFO] V229.SIG(18)
[sigmove 12:36:11 DEBUG] transformed V229Ma.SPC -> V229MA.SPC
[sigmove 12:36:11 DEBUG] transformed V229Mb.SPC -> V229MB.SPC
[sigmove 12:36:11 DEBUG] transformed V229Mc.SPC -> V229MC.SPC
[sigmove 12:36:11 DEBUG] transformed V229Md.SPC -> V229MD.SPC
[sigmove 12:36:11 DEBUG] transformed V229Me.SPC -> V229ME.SPC
[sigmove 12:36:11 DEBUG] transformed V229Mf.SPC -> V229MF.SPC
[Status 12:36:11 INFO] data for V229 transferred to science data processing
[Tidy 12:36:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:36:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:36:11 INFO] resetting WatchDogTimer
[Status 12:36:12 INFO] Starting Set [AERI set: name W229, 6 scans, 0 angle, D16300 command]
[Ingest 12:36:12 INFO] Sending XML status message
[Status 12:36:12 INFO] Mirror angle: 0
[Mirror 12:36:12 INFO] rotating to position W
[Status 12:36:12 INFO] .SET file for ACQ96 ready
[Ingest 12:36:13 INFO] Starting acquisition
[Status 12:36:13 INFO] reading housekeeping
[Status 12:36:31 INFO] acquire complete
[Status 12:36:32 INFO] writing housekeeping
[Sequencer 12:36:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:36:32 INFO] incremented W scene to 229 completed views
[Sequencer 12:36:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:36:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:36:32 INFO] incremented to [AERI set: name X229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:36:32 INFO] W229.SIG(18)
[sigmove 12:36:32 DEBUG] transformed W229Ma.SPC -> W229MA.SPC
[sigmove 12:36:32 DEBUG] transformed W229Mb.SPC -> W229MB.SPC
[sigmove 12:36:32 DEBUG] transformed W229Mc.SPC -> W229MC.SPC
[sigmove 12:36:32 DEBUG] transformed W229Md.SPC -> W229MD.SPC
[sigmove 12:36:32 DEBUG] transformed W229Me.SPC -> W229ME.SPC
[sigmove 12:36:32 DEBUG] transformed W229Mf.SPC -> W229MF.SPC
[Status 12:36:32 INFO] data for W229 transferred to science data processing
[Tidy 12:36:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:36:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:36:32 INFO] resetting WatchDogTimer
[Status 12:36:32 INFO] Starting Set [AERI set: name X229, 6 scans, 0 angle, D16300 command]
[Ingest 12:36:32 INFO] Sending XML status message
[Status 12:36:32 INFO] Mirror angle: 0
[Mirror 12:36:32 INFO] rotating to position X
[Status 12:36:33 INFO] .SET file for ACQ96 ready
[Ingest 12:36:33 INFO] Starting acquisition
[Status 12:36:33 INFO] reading housekeeping
[Status 12:36:51 INFO] acquire complete
[Status 12:36:52 INFO] writing housekeeping
[Sequencer 12:36:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:36:52 INFO] incremented X scene to 229 completed views
[Sequencer 12:36:52 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:36:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:36:52 INFO] incremented to [AERI set: name Y229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:36:52 INFO] X229.SIG(18)
[sigmove 12:36:52 DEBUG] transformed X229Ma.SPC -> X229MA.SPC
[sigmove 12:36:52 DEBUG] transformed X229Mb.SPC -> X229MB.SPC
[sigmove 12:36:52 DEBUG] transformed X229Mc.SPC -> X229MC.SPC
[sigmove 12:36:52 DEBUG] transformed X229Md.SPC -> X229MD.SPC
[sigmove 12:36:52 DEBUG] transformed X229Me.SPC -> X229ME.SPC
[sigmove 12:36:52 DEBUG] transformed X229Mf.SPC -> X229MF.SPC
[Status 12:36:52 INFO] data for X229 transferred to science data processing
[Tidy 12:36:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:36:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:36:52 INFO] resetting WatchDogTimer
[Status 12:36:52 INFO] Starting Set [AERI set: name Y229, 6 scans, 0 angle, D16300 command]
[Ingest 12:36:52 INFO] Sending XML status message
[Status 12:36:52 INFO] Mirror angle: 0
[Mirror 12:36:52 INFO] rotating to position Y
[Status 12:36:53 INFO] .SET file for ACQ96 ready
[Ingest 12:36:53 INFO] Starting acquisition
[Status 12:36:53 INFO] reading housekeeping
[Status 12:37:11 INFO] acquire complete
[Status 12:37:12 INFO] writing housekeeping
[Sequencer 12:37:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:37:12 INFO] incremented Y scene to 229 completed views
[Sequencer 12:37:12 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:37:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:37:12 INFO] incremented to [AERI set: name Z229, 6 scans, 0 angle, D16300 command] set
[sigmove 12:37:12 INFO] Y229.SIG(18)
[sigmove 12:37:12 DEBUG] transformed Y229Ma.SPC -> Y229MA.SPC
[sigmove 12:37:12 DEBUG] transformed Y229Mb.SPC -> Y229MB.SPC
[sigmove 12:37:12 DEBUG] transformed Y229Mc.SPC -> Y229MC.SPC
[sigmove 12:37:12 DEBUG] transformed Y229Md.SPC -> Y229MD.SPC
[sigmove 12:37:12 DEBUG] transformed Y229Me.SPC -> Y229ME.SPC
[sigmove 12:37:12 DEBUG] transformed Y229Mf.SPC -> Y229MF.SPC
[Status 12:37:12 INFO] data for Y229 transferred to science data processing
[Tidy 12:37:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:37:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:37:12 INFO] resetting WatchDogTimer
[Status 12:37:12 INFO] Starting Set [AERI set: name Z229, 6 scans, 0 angle, D16300 command]
[Ingest 12:37:12 INFO] Sending XML status message
[Status 12:37:12 INFO] Mirror angle: 0
[Mirror 12:37:13 INFO] rotating to position Z
[Status 12:37:13 INFO] .SET file for ACQ96 ready
[Ingest 12:37:13 INFO] Starting acquisition
[Status 12:37:14 INFO] reading housekeeping
[Status 12:37:31 INFO] acquire complete
[Status 12:37:32 INFO] writing housekeeping
[Sequencer 12:37:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:37:32 INFO] incremented Z scene to 229 completed views
[Sequencer 12:37:32 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:37:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:37:32 INFO] incremented to [AERI set: name A230, 6 scans, 120 angle, D28300 command] set
[sigmove 12:37:32 INFO] Z229.SIG(18)
[sigmove 12:37:32 DEBUG] transformed Z229Ma.SPC -> Z229MA.SPC
[sigmove 12:37:32 DEBUG] transformed Z229Mb.SPC -> Z229MB.SPC
[sigmove 12:37:32 DEBUG] transformed Z229Mc.SPC -> Z229MC.SPC
[sigmove 12:37:32 DEBUG] transformed Z229Md.SPC -> Z229MD.SPC
[sigmove 12:37:32 DEBUG] transformed Z229Me.SPC -> Z229ME.SPC
[sigmove 12:37:32 DEBUG] transformed Z229Mf.SPC -> Z229MF.SPC
[Status 12:37:32 INFO] data for Z229 transferred to science data processing
[Tidy 12:37:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:37:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:37:32 INFO] resetting WatchDogTimer
[Status 12:37:33 INFO] Starting Set [AERI set: name A230, 6 scans, 120 angle, D28300 command]
[Ingest 12:37:33 INFO] Sending XML status message
[Status 12:37:33 INFO] Mirror angle: 120
[Mirror 12:37:33 INFO] rotating to position A
[Status 12:37:34 INFO] .SET file for ACQ96 ready
[Ingest 12:37:35 INFO] Starting acquisition
[Status 12:37:35 INFO] reading housekeeping
[Status 12:37:53 INFO] acquire complete
[Status 12:37:54 INFO] writing housekeeping
[Sequencer 12:37:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:37:54 INFO] incremented A scene to 230 completed views
[Sequencer 12:37:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:37:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:37:54 INFO] incremented to [AERI set: name H230, 6 scans, 60 angle, D22500 command] set
[sigmove 12:37:54 INFO] A230.SIG(18)
[sigmove 12:37:54 DEBUG] transformed A230Ma.SPC -> A230MA.SPC
[sigmove 12:37:54 DEBUG] transformed A230Mb.SPC -> A230MB.SPC
[sigmove 12:37:54 DEBUG] transformed A230Mc.SPC -> A230MC.SPC
[sigmove 12:37:54 DEBUG] transformed A230Md.SPC -> A230MD.SPC
[sigmove 12:37:54 DEBUG] transformed A230Me.SPC -> A230ME.SPC
[sigmove 12:37:54 DEBUG] transformed A230Mf.SPC -> A230MF.SPC
[Status 12:37:54 INFO] data for A230 transferred to science data processing
[Tidy 12:37:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:37:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:37:54 INFO] resetting WatchDogTimer
[Status 12:37:54 INFO] Starting Set [AERI set: name H230, 6 scans, 60 angle, D22500 command]
[Ingest 12:37:54 INFO] Sending XML status message
[Status 12:37:54 INFO] Mirror angle: 60
[Mirror 12:37:54 INFO] rotating to position H
[Status 12:37:55 INFO] .SET file for ACQ96 ready
[Ingest 12:37:55 INFO] Starting acquisition
[Status 12:37:56 INFO] reading housekeeping
[Status 12:38:14 INFO] acquire complete
[Status 12:38:15 INFO] writing housekeeping
[Sequencer 12:38:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:38:15 INFO] incremented H scene to 230 completed views
[Sequencer 12:38:15 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:38:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:38:15 INFO] incremented to [AERI set: name S230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:38:15 INFO] H230.SIG(18)
[sigmove 12:38:15 DEBUG] transformed H230Ma.SPC -> H230MA.SPC
[sigmove 12:38:15 DEBUG] transformed H230Mb.SPC -> H230MB.SPC
[sigmove 12:38:15 DEBUG] transformed H230Mc.SPC -> H230MC.SPC
[sigmove 12:38:15 DEBUG] transformed H230Md.SPC -> H230MD.SPC
[sigmove 12:38:15 DEBUG] transformed H230Me.SPC -> H230ME.SPC
[sigmove 12:38:15 DEBUG] transformed H230Mf.SPC -> H230MF.SPC
[Status 12:38:15 INFO] data for H230 transferred to science data processing
[Tidy 12:38:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:38:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:38:15 INFO] resetting WatchDogTimer
[Status 12:38:15 INFO] Starting Set [AERI set: name S230, 6 scans, 0 angle, D16300 command]
[Ingest 12:38:15 INFO] Sending XML status message
[Status 12:38:15 INFO] Mirror angle: 0
[Mirror 12:38:15 INFO] rotating to position S
[Status 12:38:16 INFO] .SET file for ACQ96 ready
[Ingest 12:38:17 INFO] Starting acquisition
[Status 12:38:17 INFO] reading housekeeping
[Status 12:38:34 INFO] acquire complete
[Status 12:38:35 INFO] writing housekeeping
[Sequencer 12:38:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:38:35 INFO] incremented S scene to 230 completed views
[Sequencer 12:38:35 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:38:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:38:35 INFO] incremented to [AERI set: name T230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:38:35 INFO] S230.SIG(18)
[sigmove 12:38:35 DEBUG] transformed S230Ma.SPC -> S230MA.SPC
[sigmove 12:38:35 DEBUG] transformed S230Mb.SPC -> S230MB.SPC
[sigmove 12:38:35 DEBUG] transformed S230Mc.SPC -> S230MC.SPC
[sigmove 12:38:35 DEBUG] transformed S230Md.SPC -> S230MD.SPC
[sigmove 12:38:35 DEBUG] transformed S230Me.SPC -> S230ME.SPC
[sigmove 12:38:35 DEBUG] transformed S230Mf.SPC -> S230MF.SPC
[Status 12:38:35 INFO] data for S230 transferred to science data processing
[Tidy 12:38:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:38:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:38:35 INFO] resetting WatchDogTimer
[Status 12:38:36 INFO] Starting Set [AERI set: name T230, 6 scans, 0 angle, D16300 command]
[Ingest 12:38:36 INFO] Sending XML status message
[Status 12:38:36 INFO] Mirror angle: 0
[Mirror 12:38:36 INFO] rotating to position T
[Status 12:38:36 INFO] .SET file for ACQ96 ready
[Ingest 12:38:37 INFO] Starting acquisition
[Status 12:38:37 INFO] reading housekeeping
[Status 12:38:54 INFO] acquire complete
[Status 12:38:55 INFO] writing housekeeping
[Sequencer 12:38:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:38:55 INFO] incremented T scene to 230 completed views
[Sequencer 12:38:55 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:38:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:38:55 INFO] incremented to [AERI set: name U230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:38:55 INFO] T230.SIG(18)
[sigmove 12:38:55 DEBUG] transformed T230Ma.SPC -> T230MA.SPC
[sigmove 12:38:55 DEBUG] transformed T230Mb.SPC -> T230MB.SPC
[sigmove 12:38:55 DEBUG] transformed T230Mc.SPC -> T230MC.SPC
[sigmove 12:38:55 DEBUG] transformed T230Md.SPC -> T230MD.SPC
[sigmove 12:38:55 DEBUG] transformed T230Me.SPC -> T230ME.SPC
[sigmove 12:38:55 DEBUG] transformed T230Mf.SPC -> T230MF.SPC
[Status 12:38:55 INFO] data for T230 transferred to science data processing
[Tidy 12:38:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:38:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:38:55 INFO] resetting WatchDogTimer
[Status 12:38:56 INFO] Starting Set [AERI set: name U230, 6 scans, 0 angle, D16300 command]
[Ingest 12:38:56 INFO] Sending XML status message
[Status 12:38:56 INFO] Mirror angle: 0
[Mirror 12:38:56 INFO] rotating to position U
[Status 12:38:56 INFO] .SET file for ACQ96 ready
[Ingest 12:38:57 INFO] Starting acquisition
[Status 12:38:57 INFO] reading housekeeping
[Status 12:39:15 INFO] acquire complete
[Status 12:39:15 INFO] writing housekeeping
[Sequencer 12:39:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:39:15 INFO] incremented U scene to 230 completed views
[Sequencer 12:39:15 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:39:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:39:15 INFO] incremented to [AERI set: name V230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:39:15 INFO] U230.SIG(18)
[sigmove 12:39:15 DEBUG] transformed U230Ma.SPC -> U230MA.SPC
[sigmove 12:39:15 DEBUG] transformed U230Mb.SPC -> U230MB.SPC
[sigmove 12:39:15 DEBUG] transformed U230Mc.SPC -> U230MC.SPC
[sigmove 12:39:15 DEBUG] transformed U230Md.SPC -> U230MD.SPC
[sigmove 12:39:15 DEBUG] transformed U230Me.SPC -> U230ME.SPC
[sigmove 12:39:15 DEBUG] transformed U230Mf.SPC -> U230MF.SPC
[Status 12:39:15 INFO] data for U230 transferred to science data processing
[Tidy 12:39:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:39:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:39:15 INFO] resetting WatchDogTimer
[Status 12:39:16 INFO] Starting Set [AERI set: name V230, 6 scans, 0 angle, D16300 command]
[Ingest 12:39:16 INFO] Sending XML status message
[Status 12:39:16 INFO] Mirror angle: 0
[Mirror 12:39:16 INFO] rotating to position V
[Status 12:39:16 INFO] .SET file for ACQ96 ready
[Ingest 12:39:17 INFO] Starting acquisition
[Status 12:39:17 INFO] reading housekeeping
[Status 12:39:35 INFO] acquire complete
[Status 12:39:36 INFO] writing housekeeping
[Sequencer 12:39:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:39:36 INFO] incremented V scene to 230 completed views
[Sequencer 12:39:36 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:39:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:39:36 INFO] incremented to [AERI set: name W230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:39:36 INFO] V230.SIG(18)
[sigmove 12:39:36 DEBUG] transformed V230Ma.SPC -> V230MA.SPC
[sigmove 12:39:36 DEBUG] transformed V230Mb.SPC -> V230MB.SPC
[sigmove 12:39:36 DEBUG] transformed V230Mc.SPC -> V230MC.SPC
[sigmove 12:39:36 DEBUG] transformed V230Md.SPC -> V230MD.SPC
[sigmove 12:39:36 DEBUG] transformed V230Me.SPC -> V230ME.SPC
[sigmove 12:39:36 DEBUG] transformed V230Mf.SPC -> V230MF.SPC
[Status 12:39:36 INFO] data for V230 transferred to science data processing
[Tidy 12:39:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:39:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:39:36 INFO] resetting WatchDogTimer
[Status 12:39:36 INFO] Starting Set [AERI set: name W230, 6 scans, 0 angle, D16300 command]
[Ingest 12:39:36 INFO] Sending XML status message
[Status 12:39:36 INFO] Mirror angle: 0
[Mirror 12:39:36 INFO] rotating to position W
[Status 12:39:37 INFO] .SET file for ACQ96 ready
[Ingest 12:39:37 INFO] Starting acquisition
[Status 12:39:37 INFO] reading housekeeping
[Status 12:39:55 INFO] acquire complete
[Status 12:39:56 INFO] writing housekeeping
[Sequencer 12:39:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:39:56 INFO] incremented W scene to 230 completed views
[Sequencer 12:39:56 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:39:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:39:56 INFO] incremented to [AERI set: name X230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:39:56 INFO] W230.SIG(18)
[sigmove 12:39:56 DEBUG] transformed W230Ma.SPC -> W230MA.SPC
[sigmove 12:39:56 DEBUG] transformed W230Mb.SPC -> W230MB.SPC
[sigmove 12:39:56 DEBUG] transformed W230Mc.SPC -> W230MC.SPC
[sigmove 12:39:56 DEBUG] transformed W230Md.SPC -> W230MD.SPC
[sigmove 12:39:56 DEBUG] transformed W230Me.SPC -> W230ME.SPC
[sigmove 12:39:56 DEBUG] transformed W230Mf.SPC -> W230MF.SPC
[Status 12:39:56 INFO] data for W230 transferred to science data processing
[Tidy 12:39:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:39:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:39:56 INFO] resetting WatchDogTimer
[Status 12:39:56 INFO] Starting Set [AERI set: name X230, 6 scans, 0 angle, D16300 command]
[Ingest 12:39:56 INFO] Sending XML status message
[Status 12:39:56 INFO] Mirror angle: 0
[Mirror 12:39:57 INFO] rotating to position X
[Status 12:39:57 INFO] .SET file for ACQ96 ready
[Ingest 12:39:57 INFO] Starting acquisition
[Status 12:39:58 INFO] reading housekeeping
[Status 12:40:15 INFO] acquire complete
[Status 12:40:16 INFO] writing housekeeping
[Sequencer 12:40:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:40:16 INFO] incremented X scene to 230 completed views
[Sequencer 12:40:16 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:40:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:40:16 INFO] incremented to [AERI set: name Y230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:40:16 INFO] X230.SIG(18)
[sigmove 12:40:16 DEBUG] transformed X230Ma.SPC -> X230MA.SPC
[sigmove 12:40:16 DEBUG] transformed X230Mb.SPC -> X230MB.SPC
[sigmove 12:40:16 DEBUG] transformed X230Mc.SPC -> X230MC.SPC
[sigmove 12:40:16 DEBUG] transformed X230Md.SPC -> X230MD.SPC
[sigmove 12:40:16 DEBUG] transformed X230Me.SPC -> X230ME.SPC
[sigmove 12:40:16 DEBUG] transformed X230Mf.SPC -> X230MF.SPC
[Status 12:40:16 INFO] data for X230 transferred to science data processing
[Tidy 12:40:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:40:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:40:16 INFO] resetting WatchDogTimer
[Status 12:40:16 INFO] Starting Set [AERI set: name Y230, 6 scans, 0 angle, D16300 command]
[Ingest 12:40:16 INFO] Sending XML status message
[Status 12:40:16 INFO] Mirror angle: 0
[Mirror 12:40:17 INFO] rotating to position Y
[Status 12:40:17 INFO] .SET file for ACQ96 ready
[Ingest 12:40:17 INFO] Starting acquisition
[Status 12:40:18 INFO] reading housekeeping
[Status 12:40:35 INFO] acquire complete
[Status 12:40:36 INFO] writing housekeeping
[Sequencer 12:40:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:40:36 INFO] incremented Y scene to 230 completed views
[Sequencer 12:40:36 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:40:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:40:36 INFO] incremented to [AERI set: name Z230, 6 scans, 0 angle, D16300 command] set
[sigmove 12:40:36 INFO] Y230.SIG(18)
[sigmove 12:40:36 DEBUG] transformed Y230Ma.SPC -> Y230MA.SPC
[sigmove 12:40:36 DEBUG] transformed Y230Mb.SPC -> Y230MB.SPC
[sigmove 12:40:36 DEBUG] transformed Y230Mc.SPC -> Y230MC.SPC
[sigmove 12:40:36 DEBUG] transformed Y230Md.SPC -> Y230MD.SPC
[sigmove 12:40:36 DEBUG] transformed Y230Me.SPC -> Y230ME.SPC
[sigmove 12:40:36 DEBUG] transformed Y230Mf.SPC -> Y230MF.SPC
[Status 12:40:36 INFO] data for Y230 transferred to science data processing
[Tidy 12:40:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:40:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:40:36 INFO] resetting WatchDogTimer
[Status 12:40:37 INFO] Starting Set [AERI set: name Z230, 6 scans, 0 angle, D16300 command]
[Ingest 12:40:37 INFO] Sending XML status message
[Status 12:40:37 INFO] Mirror angle: 0
[Mirror 12:40:37 INFO] rotating to position Z
[Status 12:40:37 INFO] .SET file for ACQ96 ready
[Ingest 12:40:37 INFO] Starting acquisition
[Status 12:40:38 INFO] reading housekeeping
[Status 12:40:56 INFO] acquire complete
[Status 12:40:56 INFO] writing housekeeping
[Sequencer 12:40:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:40:56 INFO] incremented Z scene to 230 completed views
[Sequencer 12:40:56 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:40:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:40:56 INFO] incremented to [AERI set: name H231, 6 scans, 60 angle, D22500 command] set
[sigmove 12:40:56 INFO] Z230.SIG(18)
[sigmove 12:40:56 DEBUG] transformed Z230Ma.SPC -> Z230MA.SPC
[sigmove 12:40:56 DEBUG] transformed Z230Mb.SPC -> Z230MB.SPC
[sigmove 12:40:56 DEBUG] transformed Z230Mc.SPC -> Z230MC.SPC
[sigmove 12:40:56 DEBUG] transformed Z230Md.SPC -> Z230MD.SPC
[sigmove 12:40:56 DEBUG] transformed Z230Me.SPC -> Z230ME.SPC
[sigmove 12:40:56 DEBUG] transformed Z230Mf.SPC -> Z230MF.SPC
[Status 12:40:56 INFO] data for Z230 transferred to science data processing
[Tidy 12:40:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:40:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:40:56 INFO] resetting WatchDogTimer
[Status 12:40:57 INFO] Starting Set [AERI set: name H231, 6 scans, 60 angle, D22500 command]
[Ingest 12:40:57 INFO] Sending XML status message
[Status 12:40:57 INFO] Mirror angle: 60
[Mirror 12:40:57 INFO] rotating to position H
[Status 12:40:58 INFO] .SET file for ACQ96 ready
[Ingest 12:40:58 INFO] Starting acquisition
[Status 12:40:59 INFO] reading housekeeping
[Status 12:41:17 INFO] acquire complete
[Status 12:41:18 INFO] writing housekeeping
[Sequencer 12:41:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:41:18 INFO] incremented H scene to 231 completed views
[Sequencer 12:41:18 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:41:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:41:18 INFO] incremented to [AERI set: name A231, 6 scans, 120 angle, D28300 command] set
[sigmove 12:41:18 INFO] H231.SIG(18)
[sigmove 12:41:18 DEBUG] transformed H231Ma.SPC -> H231MA.SPC
[sigmove 12:41:18 DEBUG] transformed H231Mb.SPC -> H231MB.SPC
[sigmove 12:41:18 DEBUG] transformed H231Mc.SPC -> H231MC.SPC
[sigmove 12:41:18 DEBUG] transformed H231Md.SPC -> H231MD.SPC
[sigmove 12:41:18 DEBUG] transformed H231Me.SPC -> H231ME.SPC
[sigmove 12:41:18 DEBUG] transformed H231Mf.SPC -> H231MF.SPC
[Status 12:41:18 INFO] data for H231 transferred to science data processing
[Tidy 12:41:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:41:18 INFO] A229.FIN(19),H229.FIN(19),S229.FIN(19),T229.FIN(19),U229.FIN(19),V229.FIN(19),W229.FIN(19),X229.FIN(19),Y229.FIN(19),Z229.FIN(19),A230.FIN(19),H230.FIN(19),S230.FIN(19),T230.FIN(19),U230.FIN(19),V230.FIN(19),W230.FIN(19),X230.FIN(19),Y230.FIN(19),Z230.FIN(19)
[sigmove 12:41:18 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:41:18 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:41:22 DEBUG] done zipping
[WatchDog 12:41:22 INFO] resetting WatchDogTimer
[Status 12:41:22 INFO] Starting Set [AERI set: name A231, 6 scans, 120 angle, D28300 command]
[Ingest 12:41:22 INFO] Sending XML status message
[Status 12:41:22 INFO] Mirror angle: 120
[Mirror 12:41:23 INFO] rotating to position A
[Status 12:41:24 INFO] .SET file for ACQ96 ready
[Ingest 12:41:24 INFO] Starting acquisition
[Status 12:41:24 INFO] reading housekeeping
[Status 12:41:42 INFO] acquire complete
[Status 12:41:42 INFO] writing housekeeping
[Sequencer 12:41:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:41:42 INFO] incremented A scene to 231 completed views
[Sequencer 12:41:42 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:41:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:41:42 INFO] incremented to [AERI set: name S231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:41:42 INFO] A231.SIG(18)
[sigmove 12:41:42 DEBUG] transformed A231Ma.SPC -> A231MA.SPC
[sigmove 12:41:42 DEBUG] transformed A231Mb.SPC -> A231MB.SPC
[sigmove 12:41:42 DEBUG] transformed A231Mc.SPC -> A231MC.SPC
[sigmove 12:41:42 DEBUG] transformed A231Md.SPC -> A231MD.SPC
[sigmove 12:41:42 DEBUG] transformed A231Me.SPC -> A231ME.SPC
[sigmove 12:41:42 DEBUG] transformed A231Mf.SPC -> A231MF.SPC
[Status 12:41:42 INFO] data for A231 transferred to science data processing
[Tidy 12:41:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:41:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:41:42 INFO] resetting WatchDogTimer
[Status 12:41:43 INFO] Starting Set [AERI set: name S231, 6 scans, 0 angle, D16300 command]
[Ingest 12:41:43 INFO] Sending XML status message
[Status 12:41:43 INFO] Mirror angle: 0
[Mirror 12:41:43 INFO] rotating to position S
[Status 12:41:44 INFO] .SET file for ACQ96 ready
[Ingest 12:41:45 INFO] Starting acquisition
[Status 12:41:45 INFO] reading housekeeping
[Status 12:42:03 INFO] acquire complete
[Status 12:42:04 INFO] writing housekeeping
[Sequencer 12:42:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:42:04 INFO] incremented S scene to 231 completed views
[Sequencer 12:42:04 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:42:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:42:04 INFO] incremented to [AERI set: name T231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:42:04 INFO] S231.SIG(18)
[sigmove 12:42:04 DEBUG] transformed S231Ma.SPC -> S231MA.SPC
[sigmove 12:42:04 DEBUG] transformed S231Mb.SPC -> S231MB.SPC
[sigmove 12:42:04 DEBUG] transformed S231Mc.SPC -> S231MC.SPC
[sigmove 12:42:04 DEBUG] transformed S231Md.SPC -> S231MD.SPC
[sigmove 12:42:04 DEBUG] transformed S231Me.SPC -> S231ME.SPC
[sigmove 12:42:04 DEBUG] transformed S231Mf.SPC -> S231MF.SPC
[Status 12:42:04 INFO] data for S231 transferred to science data processing
[Tidy 12:42:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:42:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:42:04 INFO] resetting WatchDogTimer
[Status 12:42:04 INFO] Starting Set [AERI set: name T231, 6 scans, 0 angle, D16300 command]
[Ingest 12:42:04 INFO] Sending XML status message
[Status 12:42:04 INFO] Mirror angle: 0
[Mirror 12:42:04 INFO] rotating to position T
[Status 12:42:05 INFO] .SET file for ACQ96 ready
[Ingest 12:42:05 INFO] Starting acquisition
[Status 12:42:05 INFO] reading housekeeping
[Status 12:42:23 INFO] acquire complete
[Status 12:42:24 INFO] writing housekeeping
[Sequencer 12:42:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:42:24 INFO] incremented T scene to 231 completed views
[Sequencer 12:42:24 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:42:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:42:24 INFO] incremented to [AERI set: name U231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:42:24 INFO] T231.SIG(18)
[sigmove 12:42:24 DEBUG] transformed T231Ma.SPC -> T231MA.SPC
[sigmove 12:42:24 DEBUG] transformed T231Mb.SPC -> T231MB.SPC
[sigmove 12:42:24 DEBUG] transformed T231Mc.SPC -> T231MC.SPC
[sigmove 12:42:24 DEBUG] transformed T231Md.SPC -> T231MD.SPC
[sigmove 12:42:24 DEBUG] transformed T231Me.SPC -> T231ME.SPC
[sigmove 12:42:24 DEBUG] transformed T231Mf.SPC -> T231MF.SPC
[Status 12:42:24 INFO] data for T231 transferred to science data processing
[Tidy 12:42:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:42:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:42:24 INFO] resetting WatchDogTimer
[Status 12:42:25 INFO] Starting Set [AERI set: name U231, 6 scans, 0 angle, D16300 command]
[Ingest 12:42:25 INFO] Sending XML status message
[Status 12:42:25 INFO] Mirror angle: 0
[Mirror 12:42:25 INFO] rotating to position U
[Status 12:42:25 INFO] .SET file for ACQ96 ready
[Ingest 12:42:26 INFO] Starting acquisition
[Status 12:42:26 INFO] reading housekeeping
[Status 12:42:43 INFO] acquire complete
[Status 12:42:44 INFO] writing housekeeping
[Sequencer 12:42:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:42:44 INFO] incremented U scene to 231 completed views
[Sequencer 12:42:44 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:42:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:42:44 INFO] incremented to [AERI set: name V231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:42:44 INFO] U231.SIG(18)
[sigmove 12:42:44 DEBUG] transformed U231Ma.SPC -> U231MA.SPC
[sigmove 12:42:44 DEBUG] transformed U231Mb.SPC -> U231MB.SPC
[sigmove 12:42:44 DEBUG] transformed U231Mc.SPC -> U231MC.SPC
[sigmove 12:42:44 DEBUG] transformed U231Md.SPC -> U231MD.SPC
[sigmove 12:42:44 DEBUG] transformed U231Me.SPC -> U231ME.SPC
[sigmove 12:42:44 DEBUG] transformed U231Mf.SPC -> U231MF.SPC
[Status 12:42:44 INFO] data for U231 transferred to science data processing
[Tidy 12:42:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:42:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:42:44 INFO] resetting WatchDogTimer
[Status 12:42:44 INFO] Starting Set [AERI set: name V231, 6 scans, 0 angle, D16300 command]
[Ingest 12:42:44 INFO] Sending XML status message
[Status 12:42:44 INFO] Mirror angle: 0
[Mirror 12:42:45 INFO] rotating to position V
[Status 12:42:45 INFO] .SET file for ACQ96 ready
[Ingest 12:42:45 INFO] Starting acquisition
[Status 12:42:46 INFO] reading housekeeping
[Status 12:43:03 INFO] acquire complete
[Status 12:43:04 INFO] writing housekeeping
[Sequencer 12:43:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:43:04 INFO] incremented V scene to 231 completed views
[Sequencer 12:43:04 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:43:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:43:04 INFO] incremented to [AERI set: name W231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:43:04 INFO] V231.SIG(18)
[sigmove 12:43:04 DEBUG] transformed V231Ma.SPC -> V231MA.SPC
[sigmove 12:43:04 DEBUG] transformed V231Mb.SPC -> V231MB.SPC
[sigmove 12:43:04 DEBUG] transformed V231Mc.SPC -> V231MC.SPC
[sigmove 12:43:04 DEBUG] transformed V231Md.SPC -> V231MD.SPC
[sigmove 12:43:04 DEBUG] transformed V231Me.SPC -> V231ME.SPC
[sigmove 12:43:04 DEBUG] transformed V231Mf.SPC -> V231MF.SPC
[Status 12:43:04 INFO] data for V231 transferred to science data processing
[Tidy 12:43:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:43:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:43:04 INFO] resetting WatchDogTimer
[Status 12:43:05 INFO] Starting Set [AERI set: name W231, 6 scans, 0 angle, D16300 command]
[Ingest 12:43:05 INFO] Sending XML status message
[Status 12:43:05 INFO] Mirror angle: 0
[Mirror 12:43:05 INFO] rotating to position W
[Status 12:43:05 INFO] .SET file for ACQ96 ready
[Ingest 12:43:06 INFO] Starting acquisition
[Status 12:43:06 INFO] reading housekeeping
[Status 12:43:24 INFO] acquire complete
[Status 12:43:24 INFO] writing housekeeping
[Sequencer 12:43:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:43:24 INFO] incremented W scene to 231 completed views
[Sequencer 12:43:24 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:43:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:43:24 INFO] incremented to [AERI set: name X231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:43:24 INFO] W231.SIG(18)
[sigmove 12:43:24 DEBUG] transformed W231Ma.SPC -> W231MA.SPC
[sigmove 12:43:24 DEBUG] transformed W231Mb.SPC -> W231MB.SPC
[sigmove 12:43:24 DEBUG] transformed W231Mc.SPC -> W231MC.SPC
[sigmove 12:43:24 DEBUG] transformed W231Md.SPC -> W231MD.SPC
[sigmove 12:43:24 DEBUG] transformed W231Me.SPC -> W231ME.SPC
[sigmove 12:43:24 DEBUG] transformed W231Mf.SPC -> W231MF.SPC
[Status 12:43:24 INFO] data for W231 transferred to science data processing
[Tidy 12:43:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:43:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:43:24 INFO] resetting WatchDogTimer
[Status 12:43:25 INFO] Starting Set [AERI set: name X231, 6 scans, 0 angle, D16300 command]
[Ingest 12:43:25 INFO] Sending XML status message
[Status 12:43:25 INFO] Mirror angle: 0
[Mirror 12:43:25 INFO] rotating to position X
[Status 12:43:26 INFO] .SET file for ACQ96 ready
[Ingest 12:43:26 INFO] Starting acquisition
[Status 12:43:26 INFO] reading housekeeping
[Status 12:43:44 INFO] acquire complete
[Status 12:43:45 INFO] writing housekeeping
[Sequencer 12:43:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:43:45 INFO] incremented X scene to 231 completed views
[Sequencer 12:43:45 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:43:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:43:45 INFO] incremented to [AERI set: name Y231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:43:45 INFO] X231.SIG(18)
[sigmove 12:43:45 DEBUG] transformed X231Ma.SPC -> X231MA.SPC
[sigmove 12:43:45 DEBUG] transformed X231Mb.SPC -> X231MB.SPC
[sigmove 12:43:45 DEBUG] transformed X231Mc.SPC -> X231MC.SPC
[sigmove 12:43:45 DEBUG] transformed X231Md.SPC -> X231MD.SPC
[sigmove 12:43:45 DEBUG] transformed X231Me.SPC -> X231ME.SPC
[sigmove 12:43:45 DEBUG] transformed X231Mf.SPC -> X231MF.SPC
[Status 12:43:45 INFO] data for X231 transferred to science data processing
[Tidy 12:43:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:43:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:43:45 INFO] resetting WatchDogTimer
[Status 12:43:45 INFO] Starting Set [AERI set: name Y231, 6 scans, 0 angle, D16300 command]
[Ingest 12:43:45 INFO] Sending XML status message
[Status 12:43:45 INFO] Mirror angle: 0
[Mirror 12:43:45 INFO] rotating to position Y
[Status 12:43:46 INFO] .SET file for ACQ96 ready
[Ingest 12:43:46 INFO] Starting acquisition
[Status 12:43:46 INFO] reading housekeeping
[Status 12:44:04 INFO] acquire complete
[Status 12:44:05 INFO] writing housekeeping
[Sequencer 12:44:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:44:05 INFO] incremented Y scene to 231 completed views
[Sequencer 12:44:05 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:44:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:44:05 INFO] incremented to [AERI set: name Z231, 6 scans, 0 angle, D16300 command] set
[sigmove 12:44:05 INFO] Y231.SIG(18)
[sigmove 12:44:05 DEBUG] transformed Y231Ma.SPC -> Y231MA.SPC
[sigmove 12:44:05 DEBUG] transformed Y231Mb.SPC -> Y231MB.SPC
[sigmove 12:44:05 DEBUG] transformed Y231Mc.SPC -> Y231MC.SPC
[sigmove 12:44:05 DEBUG] transformed Y231Md.SPC -> Y231MD.SPC
[sigmove 12:44:05 DEBUG] transformed Y231Me.SPC -> Y231ME.SPC
[sigmove 12:44:05 DEBUG] transformed Y231Mf.SPC -> Y231MF.SPC
[Status 12:44:05 INFO] data for Y231 transferred to science data processing
[Tidy 12:44:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:44:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:44:05 INFO] resetting WatchDogTimer
[Status 12:44:05 INFO] Starting Set [AERI set: name Z231, 6 scans, 0 angle, D16300 command]
[Ingest 12:44:05 INFO] Sending XML status message
[Status 12:44:05 INFO] Mirror angle: 0
[Mirror 12:44:06 INFO] rotating to position Z
[Status 12:44:06 INFO] .SET file for ACQ96 ready
[Ingest 12:44:06 INFO] Starting acquisition
[Status 12:44:07 INFO] reading housekeeping
[Status 12:44:24 INFO] acquire complete
[Status 12:44:25 INFO] writing housekeeping
[Sequencer 12:44:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:44:25 INFO] incremented Z scene to 231 completed views
[Sequencer 12:44:25 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:44:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:44:25 INFO] incremented to [AERI set: name A232, 6 scans, 120 angle, D28300 command] set
[sigmove 12:44:25 INFO] Z231.SIG(18)
[sigmove 12:44:25 DEBUG] transformed Z231Ma.SPC -> Z231MA.SPC
[sigmove 12:44:25 DEBUG] transformed Z231Mb.SPC -> Z231MB.SPC
[sigmove 12:44:25 DEBUG] transformed Z231Mc.SPC -> Z231MC.SPC
[sigmove 12:44:25 DEBUG] transformed Z231Md.SPC -> Z231MD.SPC
[sigmove 12:44:25 DEBUG] transformed Z231Me.SPC -> Z231ME.SPC
[sigmove 12:44:25 DEBUG] transformed Z231Mf.SPC -> Z231MF.SPC
[Status 12:44:25 INFO] data for Z231 transferred to science data processing
[Tidy 12:44:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:44:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:44:25 INFO] resetting WatchDogTimer
[Status 12:44:25 INFO] Starting Set [AERI set: name A232, 6 scans, 120 angle, D28300 command]
[Ingest 12:44:25 INFO] Sending XML status message
[Status 12:44:25 INFO] Mirror angle: 120
[Mirror 12:44:26 INFO] rotating to position A
[Status 12:44:27 INFO] .SET file for ACQ96 ready
[Ingest 12:44:27 INFO] Starting acquisition
[Status 12:44:28 INFO] reading housekeeping
[Status 12:44:46 INFO] acquire complete
[Status 12:44:46 INFO] writing housekeeping
[Sequencer 12:44:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:44:46 INFO] incremented A scene to 232 completed views
[Sequencer 12:44:46 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:44:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:44:46 INFO] incremented to [AERI set: name H232, 6 scans, 60 angle, D22500 command] set
[sigmove 12:44:46 INFO] A232.SIG(18)
[sigmove 12:44:46 DEBUG] transformed A232Ma.SPC -> A232MA.SPC
[sigmove 12:44:46 DEBUG] transformed A232Mb.SPC -> A232MB.SPC
[sigmove 12:44:46 DEBUG] transformed A232Mc.SPC -> A232MC.SPC
[sigmove 12:44:46 DEBUG] transformed A232Md.SPC -> A232MD.SPC
[sigmove 12:44:46 DEBUG] transformed A232Me.SPC -> A232ME.SPC
[sigmove 12:44:46 DEBUG] transformed A232Mf.SPC -> A232MF.SPC
[Status 12:44:46 INFO] data for A232 transferred to science data processing
[Tidy 12:44:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:44:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:44:46 INFO] resetting WatchDogTimer
[Status 12:44:47 INFO] Starting Set [AERI set: name H232, 6 scans, 60 angle, D22500 command]
[Ingest 12:44:47 INFO] Sending XML status message
[Status 12:44:47 INFO] Mirror angle: 60
[Mirror 12:44:47 INFO] rotating to position H
[Status 12:44:48 INFO] .SET file for ACQ96 ready
[Ingest 12:44:48 INFO] Starting acquisition
[Status 12:44:49 INFO] reading housekeeping
[Status 12:45:06 INFO] acquire complete
[Status 12:45:07 INFO] writing housekeeping
[Sequencer 12:45:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:45:07 INFO] incremented H scene to 232 completed views
[Sequencer 12:45:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:45:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:45:07 INFO] incremented to [AERI set: name S232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:45:07 INFO] H232.SIG(18)
[sigmove 12:45:07 DEBUG] transformed H232Ma.SPC -> H232MA.SPC
[sigmove 12:45:07 DEBUG] transformed H232Mb.SPC -> H232MB.SPC
[sigmove 12:45:07 DEBUG] transformed H232Mc.SPC -> H232MC.SPC
[sigmove 12:45:07 DEBUG] transformed H232Md.SPC -> H232MD.SPC
[sigmove 12:45:07 DEBUG] transformed H232Me.SPC -> H232ME.SPC
[sigmove 12:45:07 DEBUG] transformed H232Mf.SPC -> H232MF.SPC
[Status 12:45:07 INFO] data for H232 transferred to science data processing
[Tidy 12:45:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:45:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:45:07 INFO] resetting WatchDogTimer
[Status 12:45:07 INFO] Starting Set [AERI set: name S232, 6 scans, 0 angle, D16300 command]
[Ingest 12:45:07 INFO] Sending XML status message
[Status 12:45:07 INFO] Mirror angle: 0
[Mirror 12:45:07 INFO] rotating to position S
[Status 12:45:08 INFO] .SET file for ACQ96 ready
[Ingest 12:45:08 INFO] Starting acquisition
[Status 12:45:09 INFO] reading housekeeping
[Status 12:45:27 INFO] acquire complete
[Status 12:45:28 INFO] writing housekeeping
[Sequencer 12:45:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:45:28 INFO] incremented S scene to 232 completed views
[Sequencer 12:45:28 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:45:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:45:28 INFO] incremented to [AERI set: name T232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:45:28 INFO] S232.SIG(18)
[sigmove 12:45:28 DEBUG] transformed S232Ma.SPC -> S232MA.SPC
[sigmove 12:45:28 DEBUG] transformed S232Mb.SPC -> S232MB.SPC
[sigmove 12:45:28 DEBUG] transformed S232Mc.SPC -> S232MC.SPC
[sigmove 12:45:28 DEBUG] transformed S232Md.SPC -> S232MD.SPC
[sigmove 12:45:28 DEBUG] transformed S232Me.SPC -> S232ME.SPC
[sigmove 12:45:28 DEBUG] transformed S232Mf.SPC -> S232MF.SPC
[Status 12:45:28 INFO] data for S232 transferred to science data processing
[Tidy 12:45:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:45:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:45:28 INFO] resetting WatchDogTimer
[Status 12:45:28 INFO] Starting Set [AERI set: name T232, 6 scans, 0 angle, D16300 command]
[Ingest 12:45:28 INFO] Sending XML status message
[Status 12:45:28 INFO] Mirror angle: 0
[Mirror 12:45:29 INFO] rotating to position T
[Status 12:45:29 INFO] .SET file for ACQ96 ready
[Ingest 12:45:29 INFO] Starting acquisition
[Status 12:45:30 INFO] reading housekeeping
[Status 12:45:47 INFO] acquire complete
[Status 12:45:48 INFO] writing housekeeping
[Sequencer 12:45:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:45:48 INFO] incremented T scene to 232 completed views
[Sequencer 12:45:48 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:45:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:45:48 INFO] incremented to [AERI set: name U232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:45:48 INFO] T232.SIG(18)
[sigmove 12:45:48 DEBUG] transformed T232Ma.SPC -> T232MA.SPC
[sigmove 12:45:48 DEBUG] transformed T232Mb.SPC -> T232MB.SPC
[sigmove 12:45:48 DEBUG] transformed T232Mc.SPC -> T232MC.SPC
[sigmove 12:45:48 DEBUG] transformed T232Md.SPC -> T232MD.SPC
[sigmove 12:45:48 DEBUG] transformed T232Me.SPC -> T232ME.SPC
[sigmove 12:45:48 DEBUG] transformed T232Mf.SPC -> T232MF.SPC
[Status 12:45:48 INFO] data for T232 transferred to science data processing
[Tidy 12:45:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:45:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:45:48 INFO] resetting WatchDogTimer
[Status 12:45:48 INFO] Starting Set [AERI set: name U232, 6 scans, 0 angle, D16300 command]
[Ingest 12:45:48 INFO] Sending XML status message
[Status 12:45:48 INFO] Mirror angle: 0
[Mirror 12:45:49 INFO] rotating to position U
[Status 12:45:49 INFO] .SET file for ACQ96 ready
[Ingest 12:45:49 INFO] Starting acquisition
[Status 12:45:50 INFO] reading housekeeping
[Status 12:46:07 INFO] acquire complete
[Status 12:46:08 INFO] writing housekeeping
[Sequencer 12:46:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:46:08 INFO] incremented U scene to 232 completed views
[Sequencer 12:46:08 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:46:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:46:08 INFO] incremented to [AERI set: name V232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:46:08 INFO] U232.SIG(18)
[sigmove 12:46:08 DEBUG] transformed U232Ma.SPC -> U232MA.SPC
[sigmove 12:46:08 DEBUG] transformed U232Mb.SPC -> U232MB.SPC
[sigmove 12:46:08 DEBUG] transformed U232Mc.SPC -> U232MC.SPC
[sigmove 12:46:08 DEBUG] transformed U232Md.SPC -> U232MD.SPC
[sigmove 12:46:08 DEBUG] transformed U232Me.SPC -> U232ME.SPC
[sigmove 12:46:08 DEBUG] transformed U232Mf.SPC -> U232MF.SPC
[Status 12:46:08 INFO] data for U232 transferred to science data processing
[Tidy 12:46:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:46:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:46:08 INFO] resetting WatchDogTimer
[Status 12:46:09 INFO] Starting Set [AERI set: name V232, 6 scans, 0 angle, D16300 command]
[Ingest 12:46:09 INFO] Sending XML status message
[Status 12:46:09 INFO] Mirror angle: 0
[Mirror 12:46:09 INFO] rotating to position V
[Status 12:46:09 INFO] .SET file for ACQ96 ready
[Ingest 12:46:10 INFO] Starting acquisition
[Status 12:46:10 INFO] reading housekeeping
[Status 12:46:28 INFO] acquire complete
[Status 12:46:28 INFO] writing housekeeping
[Sequencer 12:46:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:46:28 INFO] incremented V scene to 232 completed views
[Sequencer 12:46:28 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:46:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:46:28 INFO] incremented to [AERI set: name W232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:46:28 INFO] V232.SIG(18)
[sigmove 12:46:29 DEBUG] transformed V232Ma.SPC -> V232MA.SPC
[sigmove 12:46:29 DEBUG] transformed V232Mb.SPC -> V232MB.SPC
[sigmove 12:46:29 DEBUG] transformed V232Mc.SPC -> V232MC.SPC
[sigmove 12:46:29 DEBUG] transformed V232Md.SPC -> V232MD.SPC
[sigmove 12:46:29 DEBUG] transformed V232Me.SPC -> V232ME.SPC
[sigmove 12:46:29 DEBUG] transformed V232Mf.SPC -> V232MF.SPC
[Status 12:46:29 INFO] data for V232 transferred to science data processing
[Tidy 12:46:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:46:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:46:29 INFO] resetting WatchDogTimer
[Status 12:46:29 INFO] Starting Set [AERI set: name W232, 6 scans, 0 angle, D16300 command]
[Ingest 12:46:29 INFO] Sending XML status message
[Status 12:46:29 INFO] Mirror angle: 0
[Mirror 12:46:29 INFO] rotating to position W
[Status 12:46:30 INFO] .SET file for ACQ96 ready
[Ingest 12:46:30 INFO] Starting acquisition
[Status 12:46:30 INFO] reading housekeeping
[Status 12:46:48 INFO] acquire complete
[Status 12:46:49 INFO] writing housekeeping
[Sequencer 12:46:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:46:49 INFO] incremented W scene to 232 completed views
[Sequencer 12:46:49 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:46:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:46:49 INFO] incremented to [AERI set: name X232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:46:49 INFO] W232.SIG(18)
[sigmove 12:46:49 DEBUG] transformed W232Ma.SPC -> W232MA.SPC
[sigmove 12:46:49 DEBUG] transformed W232Mb.SPC -> W232MB.SPC
[sigmove 12:46:49 DEBUG] transformed W232Mc.SPC -> W232MC.SPC
[sigmove 12:46:49 DEBUG] transformed W232Md.SPC -> W232MD.SPC
[sigmove 12:46:49 DEBUG] transformed W232Me.SPC -> W232ME.SPC
[sigmove 12:46:49 DEBUG] transformed W232Mf.SPC -> W232MF.SPC
[Status 12:46:49 INFO] data for W232 transferred to science data processing
[Tidy 12:46:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:46:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:46:49 INFO] resetting WatchDogTimer
[Status 12:46:49 INFO] Starting Set [AERI set: name X232, 6 scans, 0 angle, D16300 command]
[Ingest 12:46:49 INFO] Sending XML status message
[Status 12:46:49 INFO] Mirror angle: 0
[Mirror 12:46:49 INFO] rotating to position X
[Status 12:46:50 INFO] .SET file for ACQ96 ready
[Ingest 12:46:50 INFO] Starting acquisition
[Status 12:46:50 INFO] reading housekeeping
[Status 12:47:08 INFO] acquire complete
[Status 12:47:09 INFO] writing housekeeping
[Sequencer 12:47:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:47:09 INFO] incremented X scene to 232 completed views
[Sequencer 12:47:09 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:47:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:47:09 INFO] incremented to [AERI set: name Y232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:47:09 INFO] X232.SIG(18)
[sigmove 12:47:09 DEBUG] transformed X232Ma.SPC -> X232MA.SPC
[sigmove 12:47:09 DEBUG] transformed X232Mb.SPC -> X232MB.SPC
[sigmove 12:47:09 DEBUG] transformed X232Mc.SPC -> X232MC.SPC
[sigmove 12:47:09 DEBUG] transformed X232Md.SPC -> X232MD.SPC
[sigmove 12:47:09 DEBUG] transformed X232Me.SPC -> X232ME.SPC
[sigmove 12:47:09 DEBUG] transformed X232Mf.SPC -> X232MF.SPC
[Status 12:47:09 INFO] data for X232 transferred to science data processing
[Tidy 12:47:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:47:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:47:09 INFO] resetting WatchDogTimer
[Status 12:47:09 INFO] Starting Set [AERI set: name Y232, 6 scans, 0 angle, D16300 command]
[Ingest 12:47:09 INFO] Sending XML status message
[Status 12:47:09 INFO] Mirror angle: 0
[Mirror 12:47:10 INFO] rotating to position Y
[Status 12:47:10 INFO] .SET file for ACQ96 ready
[Ingest 12:47:10 INFO] Starting acquisition
[Status 12:47:11 INFO] reading housekeeping
[Status 12:47:28 INFO] acquire complete
[Status 12:47:29 INFO] writing housekeeping
[Sequencer 12:47:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:47:29 INFO] incremented Y scene to 232 completed views
[Sequencer 12:47:29 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:47:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:47:29 INFO] incremented to [AERI set: name Z232, 6 scans, 0 angle, D16300 command] set
[sigmove 12:47:29 INFO] Y232.SIG(18)
[sigmove 12:47:29 DEBUG] transformed Y232Ma.SPC -> Y232MA.SPC
[sigmove 12:47:29 DEBUG] transformed Y232Mb.SPC -> Y232MB.SPC
[sigmove 12:47:29 DEBUG] transformed Y232Mc.SPC -> Y232MC.SPC
[sigmove 12:47:29 DEBUG] transformed Y232Md.SPC -> Y232MD.SPC
[sigmove 12:47:29 DEBUG] transformed Y232Me.SPC -> Y232ME.SPC
[sigmove 12:47:29 DEBUG] transformed Y232Mf.SPC -> Y232MF.SPC
[Status 12:47:29 INFO] data for Y232 transferred to science data processing
[Tidy 12:47:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:47:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:47:29 INFO] resetting WatchDogTimer
[Status 12:47:29 INFO] Starting Set [AERI set: name Z232, 6 scans, 0 angle, D16300 command]
[Ingest 12:47:29 INFO] Sending XML status message
[Status 12:47:29 INFO] Mirror angle: 0
[Mirror 12:47:30 INFO] rotating to position Z
[Status 12:47:30 INFO] .SET file for ACQ96 ready
[Ingest 12:47:30 INFO] Starting acquisition
[Status 12:47:31 INFO] reading housekeeping
[Status 12:47:48 INFO] acquire complete
[Status 12:47:49 INFO] writing housekeeping
[Sequencer 12:47:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:47:49 INFO] incremented Z scene to 232 completed views
[Sequencer 12:47:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:47:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:47:49 INFO] incremented to [AERI set: name H233, 6 scans, 60 angle, D22500 command] set
[sigmove 12:47:49 INFO] Z232.SIG(18)
[sigmove 12:47:49 DEBUG] transformed Z232Ma.SPC -> Z232MA.SPC
[sigmove 12:47:49 DEBUG] transformed Z232Mb.SPC -> Z232MB.SPC
[sigmove 12:47:49 DEBUG] transformed Z232Mc.SPC -> Z232MC.SPC
[sigmove 12:47:49 DEBUG] transformed Z232Md.SPC -> Z232MD.SPC
[sigmove 12:47:49 DEBUG] transformed Z232Me.SPC -> Z232ME.SPC
[sigmove 12:47:49 DEBUG] transformed Z232Mf.SPC -> Z232MF.SPC
[Status 12:47:49 INFO] data for Z232 transferred to science data processing
[Tidy 12:47:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:47:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:47:49 INFO] resetting WatchDogTimer
[Status 12:47:50 INFO] Starting Set [AERI set: name H233, 6 scans, 60 angle, D22500 command]
[Ingest 12:47:50 INFO] Sending XML status message
[Status 12:47:50 INFO] Mirror angle: 60
[Mirror 12:47:50 INFO] rotating to position H
[Status 12:47:51 INFO] .SET file for ACQ96 ready
[Ingest 12:47:51 INFO] Starting acquisition
[Status 12:47:51 INFO] reading housekeeping
[Status 12:48:10 INFO] acquire complete
[Status 12:48:11 INFO] writing housekeeping
[Sequencer 12:48:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:48:11 INFO] incremented H scene to 233 completed views
[Sequencer 12:48:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:48:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:48:11 INFO] incremented to [AERI set: name A233, 6 scans, 120 angle, D28300 command] set
[sigmove 12:48:11 INFO] H233.SIG(18)
[sigmove 12:48:11 DEBUG] transformed H233Ma.SPC -> H233MA.SPC
[sigmove 12:48:11 DEBUG] transformed H233Mb.SPC -> H233MB.SPC
[sigmove 12:48:11 DEBUG] transformed H233Mc.SPC -> H233MC.SPC
[sigmove 12:48:11 DEBUG] transformed H233Md.SPC -> H233MD.SPC
[sigmove 12:48:11 DEBUG] transformed H233Me.SPC -> H233ME.SPC
[sigmove 12:48:11 DEBUG] transformed H233Mf.SPC -> H233MF.SPC
[Status 12:48:11 INFO] data for H233 transferred to science data processing
[Tidy 12:48:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:48:11 INFO] A231.FIN(19),H231.FIN(19),S231.FIN(19),T231.FIN(19),U231.FIN(19),V231.FIN(19),W231.FIN(19),X231.FIN(19),Y231.FIN(19),Z231.FIN(19),A232.FIN(19),H232.FIN(19),S232.FIN(19),T232.FIN(19),U232.FIN(19),V232.FIN(19),W232.FIN(19),X232.FIN(19),Y232.FIN(19),Z232.FIN(19)
[sigmove 12:48:11 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:48:11 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:48:15 DEBUG] done zipping
[WatchDog 12:48:15 INFO] resetting WatchDogTimer
[Status 12:48:15 INFO] Starting Set [AERI set: name A233, 6 scans, 120 angle, D28300 command]
[Ingest 12:48:15 INFO] Sending XML status message
[Status 12:48:15 INFO] Mirror angle: 120
[Mirror 12:48:16 INFO] rotating to position A
[Status 12:48:17 INFO] .SET file for ACQ96 ready
[Ingest 12:48:17 INFO] Starting acquisition
[Status 12:48:17 INFO] reading housekeeping
[Status 12:48:34 INFO] acquire complete
[Status 12:48:35 INFO] writing housekeeping
[Sequencer 12:48:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:48:35 INFO] incremented A scene to 233 completed views
[Sequencer 12:48:35 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:48:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:48:35 INFO] incremented to [AERI set: name S233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:48:35 INFO] A233.SIG(18)
[sigmove 12:48:35 DEBUG] transformed A233Ma.SPC -> A233MA.SPC
[sigmove 12:48:35 DEBUG] transformed A233Mb.SPC -> A233MB.SPC
[sigmove 12:48:35 DEBUG] transformed A233Mc.SPC -> A233MC.SPC
[sigmove 12:48:35 DEBUG] transformed A233Md.SPC -> A233MD.SPC
[sigmove 12:48:35 DEBUG] transformed A233Me.SPC -> A233ME.SPC
[sigmove 12:48:35 DEBUG] transformed A233Mf.SPC -> A233MF.SPC
[Status 12:48:35 INFO] data for A233 transferred to science data processing
[Tidy 12:48:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:48:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:48:35 INFO] resetting WatchDogTimer
[Status 12:48:36 INFO] Starting Set [AERI set: name S233, 6 scans, 0 angle, D16300 command]
[Ingest 12:48:36 INFO] Sending XML status message
[Status 12:48:36 INFO] Mirror angle: 0
[Mirror 12:48:36 INFO] rotating to position S
[Status 12:48:37 INFO] .SET file for ACQ96 ready
[Ingest 12:48:38 INFO] Starting acquisition
[Status 12:48:38 INFO] reading housekeeping
[Status 12:48:56 INFO] acquire complete
[Status 12:48:57 INFO] writing housekeeping
[Sequencer 12:48:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:48:57 INFO] incremented S scene to 233 completed views
[Sequencer 12:48:57 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:48:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:48:57 INFO] incremented to [AERI set: name T233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:48:57 INFO] S233.SIG(18)
[sigmove 12:48:57 DEBUG] transformed S233Ma.SPC -> S233MA.SPC
[sigmove 12:48:57 DEBUG] transformed S233Mb.SPC -> S233MB.SPC
[sigmove 12:48:57 DEBUG] transformed S233Mc.SPC -> S233MC.SPC
[sigmove 12:48:57 DEBUG] transformed S233Md.SPC -> S233MD.SPC
[sigmove 12:48:57 DEBUG] transformed S233Me.SPC -> S233ME.SPC
[sigmove 12:48:57 DEBUG] transformed S233Mf.SPC -> S233MF.SPC
[Status 12:48:57 INFO] data for S233 transferred to science data processing
[Tidy 12:48:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:48:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:48:57 INFO] resetting WatchDogTimer
[Status 12:48:57 INFO] Starting Set [AERI set: name T233, 6 scans, 0 angle, D16300 command]
[Ingest 12:48:57 INFO] Sending XML status message
[Status 12:48:57 INFO] Mirror angle: 0
[Mirror 12:48:57 INFO] rotating to position T
[Status 12:48:58 INFO] .SET file for ACQ96 ready
[Ingest 12:48:58 INFO] Starting acquisition
[Status 12:48:58 INFO] reading housekeeping
[Status 12:49:16 INFO] acquire complete
[Status 12:49:17 INFO] writing housekeeping
[Sequencer 12:49:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:49:17 INFO] incremented T scene to 233 completed views
[Sequencer 12:49:17 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:49:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:49:17 INFO] incremented to [AERI set: name U233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:49:17 INFO] T233.SIG(18)
[sigmove 12:49:17 DEBUG] transformed T233Ma.SPC -> T233MA.SPC
[sigmove 12:49:17 DEBUG] transformed T233Mb.SPC -> T233MB.SPC
[sigmove 12:49:17 DEBUG] transformed T233Mc.SPC -> T233MC.SPC
[sigmove 12:49:17 DEBUG] transformed T233Md.SPC -> T233MD.SPC
[sigmove 12:49:17 DEBUG] transformed T233Me.SPC -> T233ME.SPC
[sigmove 12:49:17 DEBUG] transformed T233Mf.SPC -> T233MF.SPC
[Status 12:49:17 INFO] data for T233 transferred to science data processing
[Tidy 12:49:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:49:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:49:17 INFO] resetting WatchDogTimer
[Status 12:49:17 INFO] Starting Set [AERI set: name U233, 6 scans, 0 angle, D16300 command]
[Ingest 12:49:17 INFO] Sending XML status message
[Status 12:49:17 INFO] Mirror angle: 0
[Mirror 12:49:17 INFO] rotating to position U
[Status 12:49:18 INFO] .SET file for ACQ96 ready
[Ingest 12:49:18 INFO] Starting acquisition
[Status 12:49:18 INFO] reading housekeeping
[Status 12:49:36 INFO] acquire complete
[Status 12:49:37 INFO] writing housekeeping
[Sequencer 12:49:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:49:37 INFO] incremented U scene to 233 completed views
[Sequencer 12:49:37 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:49:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:49:37 INFO] incremented to [AERI set: name V233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:49:37 INFO] U233.SIG(18)
[sigmove 12:49:37 DEBUG] transformed U233Ma.SPC -> U233MA.SPC
[sigmove 12:49:37 DEBUG] transformed U233Mb.SPC -> U233MB.SPC
[sigmove 12:49:37 DEBUG] transformed U233Mc.SPC -> U233MC.SPC
[sigmove 12:49:37 DEBUG] transformed U233Md.SPC -> U233MD.SPC
[sigmove 12:49:37 DEBUG] transformed U233Me.SPC -> U233ME.SPC
[sigmove 12:49:37 DEBUG] transformed U233Mf.SPC -> U233MF.SPC
[Status 12:49:37 INFO] data for U233 transferred to science data processing
[Tidy 12:49:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:49:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:49:37 INFO] resetting WatchDogTimer
[Status 12:49:37 INFO] Starting Set [AERI set: name V233, 6 scans, 0 angle, D16300 command]
[Ingest 12:49:37 INFO] Sending XML status message
[Status 12:49:37 INFO] Mirror angle: 0
[Mirror 12:49:38 INFO] rotating to position V
[Status 12:49:38 INFO] .SET file for ACQ96 ready
[Ingest 12:49:38 INFO] Starting acquisition
[Status 12:49:39 INFO] reading housekeeping
[Status 12:49:56 INFO] acquire complete
[Status 12:49:57 INFO] writing housekeeping
[Sequencer 12:49:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:49:57 INFO] incremented V scene to 233 completed views
[Sequencer 12:49:57 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:49:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:49:57 INFO] incremented to [AERI set: name W233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:49:57 INFO] V233.SIG(18)
[sigmove 12:49:57 DEBUG] transformed V233Ma.SPC -> V233MA.SPC
[sigmove 12:49:57 DEBUG] transformed V233Mb.SPC -> V233MB.SPC
[sigmove 12:49:57 DEBUG] transformed V233Mc.SPC -> V233MC.SPC
[sigmove 12:49:57 DEBUG] transformed V233Md.SPC -> V233MD.SPC
[sigmove 12:49:57 DEBUG] transformed V233Me.SPC -> V233ME.SPC
[sigmove 12:49:57 DEBUG] transformed V233Mf.SPC -> V233MF.SPC
[Status 12:49:57 INFO] data for V233 transferred to science data processing
[Tidy 12:49:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:49:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:49:57 INFO] resetting WatchDogTimer
[Status 12:49:57 INFO] Starting Set [AERI set: name W233, 6 scans, 0 angle, D16300 command]
[Ingest 12:49:57 INFO] Sending XML status message
[Status 12:49:57 INFO] Mirror angle: 0
[Mirror 12:49:58 INFO] rotating to position W
[Status 12:49:58 INFO] .SET file for ACQ96 ready
[Ingest 12:49:58 INFO] Starting acquisition
[Status 12:49:59 INFO] reading housekeeping
[Status 12:50:16 INFO] acquire complete
[Status 12:50:17 INFO] writing housekeeping
[Sequencer 12:50:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:50:17 INFO] incremented W scene to 233 completed views
[Sequencer 12:50:17 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:50:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:50:17 INFO] incremented to [AERI set: name X233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:50:17 INFO] W233.SIG(18)
[sigmove 12:50:17 DEBUG] transformed W233Ma.SPC -> W233MA.SPC
[sigmove 12:50:17 DEBUG] transformed W233Mb.SPC -> W233MB.SPC
[sigmove 12:50:17 DEBUG] transformed W233Mc.SPC -> W233MC.SPC
[sigmove 12:50:17 DEBUG] transformed W233Md.SPC -> W233MD.SPC
[sigmove 12:50:17 DEBUG] transformed W233Me.SPC -> W233ME.SPC
[sigmove 12:50:17 DEBUG] transformed W233Mf.SPC -> W233MF.SPC
[Status 12:50:17 INFO] data for W233 transferred to science data processing
[Tidy 12:50:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:50:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:50:17 INFO] resetting WatchDogTimer
[Status 12:50:18 INFO] Starting Set [AERI set: name X233, 6 scans, 0 angle, D16300 command]
[Ingest 12:50:18 INFO] Sending XML status message
[Status 12:50:18 INFO] Mirror angle: 0
[Mirror 12:50:18 INFO] rotating to position X
[Status 12:50:18 INFO] .SET file for ACQ96 ready
[Ingest 12:50:19 INFO] Starting acquisition
[Status 12:50:19 INFO] reading housekeeping
[Status 12:50:37 INFO] acquire complete
[Status 12:50:38 INFO] writing housekeeping
[Sequencer 12:50:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:50:38 INFO] incremented X scene to 233 completed views
[Sequencer 12:50:38 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:50:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:50:38 INFO] incremented to [AERI set: name Y233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:50:38 INFO] X233.SIG(18)
[sigmove 12:50:38 DEBUG] transformed X233Ma.SPC -> X233MA.SPC
[sigmove 12:50:38 DEBUG] transformed X233Mb.SPC -> X233MB.SPC
[sigmove 12:50:38 DEBUG] transformed X233Mc.SPC -> X233MC.SPC
[sigmove 12:50:38 DEBUG] transformed X233Md.SPC -> X233MD.SPC
[sigmove 12:50:38 DEBUG] transformed X233Me.SPC -> X233ME.SPC
[sigmove 12:50:38 DEBUG] transformed X233Mf.SPC -> X233MF.SPC
[Status 12:50:38 INFO] data for X233 transferred to science data processing
[Tidy 12:50:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:50:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:50:38 INFO] resetting WatchDogTimer
[Status 12:50:38 INFO] Starting Set [AERI set: name Y233, 6 scans, 0 angle, D16300 command]
[Ingest 12:50:38 INFO] Sending XML status message
[Status 12:50:38 INFO] Mirror angle: 0
[Mirror 12:50:38 INFO] rotating to position Y
[Status 12:50:39 INFO] .SET file for ACQ96 ready
[Ingest 12:50:39 INFO] Starting acquisition
[Status 12:50:39 INFO] reading housekeeping
[Status 12:50:57 INFO] acquire complete
[Status 12:50:58 INFO] writing housekeeping
[Sequencer 12:50:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:50:58 INFO] incremented Y scene to 233 completed views
[Sequencer 12:50:58 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:50:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:50:58 INFO] incremented to [AERI set: name Z233, 6 scans, 0 angle, D16300 command] set
[sigmove 12:50:58 INFO] Y233.SIG(18)
[sigmove 12:50:58 DEBUG] transformed Y233Ma.SPC -> Y233MA.SPC
[sigmove 12:50:58 DEBUG] transformed Y233Mb.SPC -> Y233MB.SPC
[sigmove 12:50:58 DEBUG] transformed Y233Mc.SPC -> Y233MC.SPC
[sigmove 12:50:58 DEBUG] transformed Y233Md.SPC -> Y233MD.SPC
[sigmove 12:50:58 DEBUG] transformed Y233Me.SPC -> Y233ME.SPC
[sigmove 12:50:58 DEBUG] transformed Y233Mf.SPC -> Y233MF.SPC
[Status 12:50:58 INFO] data for Y233 transferred to science data processing
[Tidy 12:50:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:50:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:50:58 INFO] resetting WatchDogTimer
[Status 12:50:58 INFO] Starting Set [AERI set: name Z233, 6 scans, 0 angle, D16300 command]
[Ingest 12:50:58 INFO] Sending XML status message
[Status 12:50:58 INFO] Mirror angle: 0
[Mirror 12:50:58 INFO] rotating to position Z
[Status 12:50:59 INFO] .SET file for ACQ96 ready
[Ingest 12:50:59 INFO] Starting acquisition
[Status 12:50:59 INFO] reading housekeeping
[Status 12:51:17 INFO] acquire complete
[Status 12:51:18 INFO] writing housekeeping
[Sequencer 12:51:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:51:18 INFO] incremented Z scene to 233 completed views
[Sequencer 12:51:18 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:51:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:51:18 INFO] incremented to [AERI set: name A234, 6 scans, 120 angle, D28300 command] set
[sigmove 12:51:18 INFO] Z233.SIG(18)
[sigmove 12:51:18 DEBUG] transformed Z233Ma.SPC -> Z233MA.SPC
[sigmove 12:51:18 DEBUG] transformed Z233Mb.SPC -> Z233MB.SPC
[sigmove 12:51:18 DEBUG] transformed Z233Mc.SPC -> Z233MC.SPC
[sigmove 12:51:18 DEBUG] transformed Z233Md.SPC -> Z233MD.SPC
[sigmove 12:51:18 DEBUG] transformed Z233Me.SPC -> Z233ME.SPC
[sigmove 12:51:18 DEBUG] transformed Z233Mf.SPC -> Z233MF.SPC
[Status 12:51:18 INFO] data for Z233 transferred to science data processing
[Tidy 12:51:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:51:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:51:18 INFO] resetting WatchDogTimer
[Status 12:51:18 INFO] Starting Set [AERI set: name A234, 6 scans, 120 angle, D28300 command]
[Ingest 12:51:18 INFO] Sending XML status message
[Status 12:51:18 INFO] Mirror angle: 120
[Mirror 12:51:19 INFO] rotating to position A
[Status 12:51:20 INFO] .SET file for ACQ96 ready
[Ingest 12:51:20 INFO] Starting acquisition
[Status 12:51:21 INFO] reading housekeeping
[Status 12:51:38 INFO] acquire complete
[Status 12:51:39 INFO] writing housekeeping
[Sequencer 12:51:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:51:39 INFO] incremented A scene to 234 completed views
[Sequencer 12:51:39 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:51:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:51:39 INFO] incremented to [AERI set: name H234, 6 scans, 60 angle, D22500 command] set
[sigmove 12:51:39 INFO] A234.SIG(18)
[sigmove 12:51:39 DEBUG] transformed A234Ma.SPC -> A234MA.SPC
[sigmove 12:51:39 DEBUG] transformed A234Mb.SPC -> A234MB.SPC
[sigmove 12:51:39 DEBUG] transformed A234Mc.SPC -> A234MC.SPC
[sigmove 12:51:39 DEBUG] transformed A234Md.SPC -> A234MD.SPC
[sigmove 12:51:39 DEBUG] transformed A234Me.SPC -> A234ME.SPC
[sigmove 12:51:39 DEBUG] transformed A234Mf.SPC -> A234MF.SPC
[Status 12:51:39 INFO] data for A234 transferred to science data processing
[Tidy 12:51:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:51:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:51:39 INFO] resetting WatchDogTimer
[Status 12:51:40 INFO] Starting Set [AERI set: name H234, 6 scans, 60 angle, D22500 command]
[Ingest 12:51:40 INFO] Sending XML status message
[Status 12:51:40 INFO] Mirror angle: 60
[Mirror 12:51:40 INFO] rotating to position H
[Status 12:51:41 INFO] .SET file for ACQ96 ready
[Ingest 12:51:41 INFO] Starting acquisition
[Status 12:51:41 INFO] reading housekeeping
[Status 12:51:59 INFO] acquire complete
[Status 12:51:59 INFO] writing housekeeping
[Sequencer 12:51:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:51:59 INFO] incremented H scene to 234 completed views
[Sequencer 12:51:59 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:51:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:51:59 INFO] incremented to [AERI set: name S234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:51:59 INFO] H234.SIG(18)
[sigmove 12:51:59 DEBUG] transformed H234Ma.SPC -> H234MA.SPC
[sigmove 12:51:59 DEBUG] transformed H234Mb.SPC -> H234MB.SPC
[sigmove 12:51:59 DEBUG] transformed H234Mc.SPC -> H234MC.SPC
[sigmove 12:51:59 DEBUG] transformed H234Md.SPC -> H234MD.SPC
[sigmove 12:51:59 DEBUG] transformed H234Me.SPC -> H234ME.SPC
[sigmove 12:51:59 DEBUG] transformed H234Mf.SPC -> H234MF.SPC
[Status 12:51:59 INFO] data for H234 transferred to science data processing
[Tidy 12:51:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:51:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:51:59 INFO] resetting WatchDogTimer
[Status 12:52:00 INFO] Starting Set [AERI set: name S234, 6 scans, 0 angle, D16300 command]
[Ingest 12:52:00 INFO] Sending XML status message
[Status 12:52:00 INFO] Mirror angle: 0
[Mirror 12:52:00 INFO] rotating to position S
[Status 12:52:01 INFO] .SET file for ACQ96 ready
[Ingest 12:52:01 INFO] Starting acquisition
[Status 12:52:02 INFO] reading housekeeping
[Status 12:52:20 INFO] acquire complete
[Status 12:52:21 INFO] writing housekeeping
[Sequencer 12:52:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:52:21 INFO] incremented S scene to 234 completed views
[Sequencer 12:52:21 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:52:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:52:21 INFO] incremented to [AERI set: name T234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:52:21 INFO] S234.SIG(18)
[sigmove 12:52:21 DEBUG] transformed S234Ma.SPC -> S234MA.SPC
[sigmove 12:52:21 DEBUG] transformed S234Mb.SPC -> S234MB.SPC
[sigmove 12:52:21 DEBUG] transformed S234Mc.SPC -> S234MC.SPC
[sigmove 12:52:21 DEBUG] transformed S234Md.SPC -> S234MD.SPC
[sigmove 12:52:21 DEBUG] transformed S234Me.SPC -> S234ME.SPC
[sigmove 12:52:21 DEBUG] transformed S234Mf.SPC -> S234MF.SPC
[Status 12:52:21 INFO] data for S234 transferred to science data processing
[Tidy 12:52:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:52:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:52:21 INFO] resetting WatchDogTimer
[Status 12:52:21 INFO] Starting Set [AERI set: name T234, 6 scans, 0 angle, D16300 command]
[Ingest 12:52:21 INFO] Sending XML status message
[Status 12:52:21 INFO] Mirror angle: 0
[Mirror 12:52:22 INFO] rotating to position T
[Status 12:52:22 INFO] .SET file for ACQ96 ready
[Ingest 12:52:22 INFO] Starting acquisition
[Status 12:52:23 INFO] reading housekeeping
[Status 12:52:40 INFO] acquire complete
[Status 12:52:41 INFO] writing housekeeping
[Sequencer 12:52:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:52:41 INFO] incremented T scene to 234 completed views
[Sequencer 12:52:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:52:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:52:41 INFO] incremented to [AERI set: name U234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:52:41 INFO] T234.SIG(18)
[sigmove 12:52:41 DEBUG] transformed T234Ma.SPC -> T234MA.SPC
[sigmove 12:52:41 DEBUG] transformed T234Mb.SPC -> T234MB.SPC
[sigmove 12:52:41 DEBUG] transformed T234Mc.SPC -> T234MC.SPC
[sigmove 12:52:41 DEBUG] transformed T234Md.SPC -> T234MD.SPC
[sigmove 12:52:41 DEBUG] transformed T234Me.SPC -> T234ME.SPC
[sigmove 12:52:41 DEBUG] transformed T234Mf.SPC -> T234MF.SPC
[Status 12:52:41 INFO] data for T234 transferred to science data processing
[Tidy 12:52:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:52:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:52:41 INFO] resetting WatchDogTimer
[Status 12:52:41 INFO] Starting Set [AERI set: name U234, 6 scans, 0 angle, D16300 command]
[Ingest 12:52:41 INFO] Sending XML status message
[Status 12:52:41 INFO] Mirror angle: 0
[Mirror 12:52:42 INFO] rotating to position U
[Status 12:52:42 INFO] .SET file for ACQ96 ready
[Ingest 12:52:42 INFO] Starting acquisition
[Status 12:52:43 INFO] reading housekeeping
[Status 12:53:00 INFO] acquire complete
[Status 12:53:01 INFO] writing housekeeping
[Sequencer 12:53:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:53:01 INFO] incremented U scene to 234 completed views
[Sequencer 12:53:01 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:53:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:53:01 INFO] incremented to [AERI set: name V234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:53:01 INFO] U234.SIG(18)
[sigmove 12:53:01 DEBUG] transformed U234Ma.SPC -> U234MA.SPC
[sigmove 12:53:01 DEBUG] transformed U234Mb.SPC -> U234MB.SPC
[sigmove 12:53:01 DEBUG] transformed U234Mc.SPC -> U234MC.SPC
[sigmove 12:53:01 DEBUG] transformed U234Md.SPC -> U234MD.SPC
[sigmove 12:53:01 DEBUG] transformed U234Me.SPC -> U234ME.SPC
[sigmove 12:53:01 DEBUG] transformed U234Mf.SPC -> U234MF.SPC
[Status 12:53:01 INFO] data for U234 transferred to science data processing
[Tidy 12:53:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:53:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:53:01 INFO] resetting WatchDogTimer
[Status 12:53:01 INFO] Starting Set [AERI set: name V234, 6 scans, 0 angle, D16300 command]
[Ingest 12:53:01 INFO] Sending XML status message
[Status 12:53:01 INFO] Mirror angle: 0
[Mirror 12:53:02 INFO] rotating to position V
[Status 12:53:02 INFO] .SET file for ACQ96 ready
[Ingest 12:53:02 INFO] Starting acquisition
[Status 12:53:03 INFO] reading housekeeping
[Status 12:53:20 INFO] acquire complete
[Status 12:53:21 INFO] writing housekeeping
[Sequencer 12:53:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:53:21 INFO] incremented V scene to 234 completed views
[Sequencer 12:53:21 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:53:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:53:21 INFO] incremented to [AERI set: name W234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:53:21 INFO] V234.SIG(18)
[sigmove 12:53:21 DEBUG] transformed V234Ma.SPC -> V234MA.SPC
[sigmove 12:53:21 DEBUG] transformed V234Mb.SPC -> V234MB.SPC
[sigmove 12:53:21 DEBUG] transformed V234Mc.SPC -> V234MC.SPC
[sigmove 12:53:21 DEBUG] transformed V234Md.SPC -> V234MD.SPC
[sigmove 12:53:21 DEBUG] transformed V234Me.SPC -> V234ME.SPC
[sigmove 12:53:21 DEBUG] transformed V234Mf.SPC -> V234MF.SPC
[Status 12:53:21 INFO] data for V234 transferred to science data processing
[Tidy 12:53:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:53:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:53:21 INFO] resetting WatchDogTimer
[Status 12:53:22 INFO] Starting Set [AERI set: name W234, 6 scans, 0 angle, D16300 command]
[Ingest 12:53:22 INFO] Sending XML status message
[Status 12:53:22 INFO] Mirror angle: 0
[Mirror 12:53:22 INFO] rotating to position W
[Status 12:53:22 INFO] .SET file for ACQ96 ready
[Ingest 12:53:23 INFO] Starting acquisition
[Status 12:53:23 INFO] reading housekeeping
[Status 12:53:41 INFO] acquire complete
[Status 12:53:42 INFO] writing housekeeping
[Sequencer 12:53:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:53:42 INFO] incremented W scene to 234 completed views
[Sequencer 12:53:42 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:53:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:53:42 INFO] incremented to [AERI set: name X234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:53:42 INFO] W234.SIG(18)
[sigmove 12:53:42 DEBUG] transformed W234Ma.SPC -> W234MA.SPC
[sigmove 12:53:42 DEBUG] transformed W234Mb.SPC -> W234MB.SPC
[sigmove 12:53:42 DEBUG] transformed W234Mc.SPC -> W234MC.SPC
[sigmove 12:53:42 DEBUG] transformed W234Md.SPC -> W234MD.SPC
[sigmove 12:53:42 DEBUG] transformed W234Me.SPC -> W234ME.SPC
[sigmove 12:53:42 DEBUG] transformed W234Mf.SPC -> W234MF.SPC
[Status 12:53:42 INFO] data for W234 transferred to science data processing
[Tidy 12:53:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:53:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:53:42 INFO] resetting WatchDogTimer
[Status 12:53:42 INFO] Starting Set [AERI set: name X234, 6 scans, 0 angle, D16300 command]
[Ingest 12:53:42 INFO] Sending XML status message
[Status 12:53:42 INFO] Mirror angle: 0
[Mirror 12:53:42 INFO] rotating to position X
[Status 12:53:43 INFO] .SET file for ACQ96 ready
[Ingest 12:53:43 INFO] Starting acquisition
[Status 12:53:43 INFO] reading housekeeping
[Status 12:54:01 INFO] acquire complete
[Status 12:54:02 INFO] writing housekeeping
[Sequencer 12:54:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:54:02 INFO] incremented X scene to 234 completed views
[Sequencer 12:54:02 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:54:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:54:02 INFO] incremented to [AERI set: name Y234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:54:02 INFO] X234.SIG(18)
[sigmove 12:54:02 DEBUG] transformed X234Ma.SPC -> X234MA.SPC
[sigmove 12:54:02 DEBUG] transformed X234Mb.SPC -> X234MB.SPC
[sigmove 12:54:02 DEBUG] transformed X234Mc.SPC -> X234MC.SPC
[sigmove 12:54:02 DEBUG] transformed X234Md.SPC -> X234MD.SPC
[sigmove 12:54:02 DEBUG] transformed X234Me.SPC -> X234ME.SPC
[sigmove 12:54:02 DEBUG] transformed X234Mf.SPC -> X234MF.SPC
[Status 12:54:02 INFO] data for X234 transferred to science data processing
[Tidy 12:54:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:54:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:54:02 INFO] resetting WatchDogTimer
[Status 12:54:02 INFO] Starting Set [AERI set: name Y234, 6 scans, 0 angle, D16300 command]
[Ingest 12:54:02 INFO] Sending XML status message
[Status 12:54:02 INFO] Mirror angle: 0
[Mirror 12:54:02 INFO] rotating to position Y
[Status 12:54:03 INFO] .SET file for ACQ96 ready
[Ingest 12:54:03 INFO] Starting acquisition
[Status 12:54:03 INFO] reading housekeeping
[Status 12:54:21 INFO] acquire complete
[Status 12:54:22 INFO] writing housekeeping
[Sequencer 12:54:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:54:22 INFO] incremented Y scene to 234 completed views
[Sequencer 12:54:22 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:54:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:54:22 INFO] incremented to [AERI set: name Z234, 6 scans, 0 angle, D16300 command] set
[sigmove 12:54:22 INFO] Y234.SIG(18)
[sigmove 12:54:22 DEBUG] transformed Y234Ma.SPC -> Y234MA.SPC
[sigmove 12:54:22 DEBUG] transformed Y234Mb.SPC -> Y234MB.SPC
[sigmove 12:54:22 DEBUG] transformed Y234Mc.SPC -> Y234MC.SPC
[sigmove 12:54:22 DEBUG] transformed Y234Md.SPC -> Y234MD.SPC
[sigmove 12:54:22 DEBUG] transformed Y234Me.SPC -> Y234ME.SPC
[sigmove 12:54:22 DEBUG] transformed Y234Mf.SPC -> Y234MF.SPC
[Status 12:54:22 INFO] data for Y234 transferred to science data processing
[Tidy 12:54:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:54:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:54:22 INFO] resetting WatchDogTimer
[Status 12:54:22 INFO] Starting Set [AERI set: name Z234, 6 scans, 0 angle, D16300 command]
[Ingest 12:54:22 INFO] Sending XML status message
[Status 12:54:22 INFO] Mirror angle: 0
[Mirror 12:54:23 INFO] rotating to position Z
[Status 12:54:23 INFO] .SET file for ACQ96 ready
[Ingest 12:54:23 INFO] Starting acquisition
[Status 12:54:24 INFO] reading housekeeping
[Status 12:54:41 INFO] acquire complete
[Status 12:54:42 INFO] writing housekeeping
[Sequencer 12:54:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:54:42 INFO] incremented Z scene to 234 completed views
[Sequencer 12:54:42 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:54:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:54:42 INFO] incremented to [AERI set: name H235, 6 scans, 60 angle, D22500 command] set
[sigmove 12:54:42 INFO] Z234.SIG(18)
[sigmove 12:54:42 DEBUG] transformed Z234Ma.SPC -> Z234MA.SPC
[sigmove 12:54:42 DEBUG] transformed Z234Mb.SPC -> Z234MB.SPC
[sigmove 12:54:42 DEBUG] transformed Z234Mc.SPC -> Z234MC.SPC
[sigmove 12:54:42 DEBUG] transformed Z234Md.SPC -> Z234MD.SPC
[sigmove 12:54:42 DEBUG] transformed Z234Me.SPC -> Z234ME.SPC
[sigmove 12:54:42 DEBUG] transformed Z234Mf.SPC -> Z234MF.SPC
[Status 12:54:42 INFO] data for Z234 transferred to science data processing
[Tidy 12:54:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:54:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:54:42 INFO] resetting WatchDogTimer
[Status 12:54:42 INFO] Starting Set [AERI set: name H235, 6 scans, 60 angle, D22500 command]
[Ingest 12:54:42 INFO] Sending XML status message
[Status 12:54:42 INFO] Mirror angle: 60
[Mirror 12:54:43 INFO] rotating to position H
[Status 12:54:44 INFO] .SET file for ACQ96 ready
[Ingest 12:54:44 INFO] Starting acquisition
[Status 12:54:44 INFO] reading housekeeping
[Status 12:55:03 INFO] acquire complete
[Status 12:55:03 INFO] writing housekeeping
[Sequencer 12:55:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:55:03 INFO] incremented H scene to 235 completed views
[Sequencer 12:55:03 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:55:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:55:03 INFO] incremented to [AERI set: name A235, 6 scans, 120 angle, D28300 command] set
[sigmove 12:55:03 INFO] H235.SIG(18)
[sigmove 12:55:03 DEBUG] transformed H235Ma.SPC -> H235MA.SPC
[sigmove 12:55:03 DEBUG] transformed H235Mb.SPC -> H235MB.SPC
[sigmove 12:55:03 DEBUG] transformed H235Mc.SPC -> H235MC.SPC
[sigmove 12:55:03 DEBUG] transformed H235Md.SPC -> H235MD.SPC
[sigmove 12:55:03 DEBUG] transformed H235Me.SPC -> H235ME.SPC
[sigmove 12:55:03 DEBUG] transformed H235Mf.SPC -> H235MF.SPC
[Status 12:55:03 INFO] data for H235 transferred to science data processing
[Tidy 12:55:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:55:04 INFO] A233.FIN(19),H233.FIN(19),S233.FIN(19),T233.FIN(19),U233.FIN(19),V233.FIN(19),W233.FIN(19),X233.FIN(19),Y233.FIN(19),Z233.FIN(19),A234.FIN(19),H234.FIN(19),S234.FIN(19),T234.FIN(19),U234.FIN(19),V234.FIN(19),W234.FIN(19),X234.FIN(19),Y234.FIN(19),Z234.FIN(19)
[sigmove 12:55:04 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:55:04 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 12:55:08 DEBUG] done zipping
[WatchDog 12:55:08 INFO] resetting WatchDogTimer
[Status 12:55:08 INFO] Starting Set [AERI set: name A235, 6 scans, 120 angle, D28300 command]
[Ingest 12:55:08 INFO] Sending XML status message
[Status 12:55:08 INFO] Mirror angle: 120
[Mirror 12:55:09 INFO] rotating to position A
[Status 12:55:10 INFO] .SET file for ACQ96 ready
[Ingest 12:55:10 INFO] Starting acquisition
[Status 12:55:10 INFO] reading housekeeping
[Status 12:55:28 INFO] acquire complete
[Status 12:55:29 INFO] writing housekeeping
[Sequencer 12:55:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:55:29 INFO] incremented A scene to 235 completed views
[Sequencer 12:55:29 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:55:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:55:29 INFO] incremented to [AERI set: name S235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:55:29 INFO] A235.SIG(18)
[sigmove 12:55:29 DEBUG] transformed A235Ma.SPC -> A235MA.SPC
[sigmove 12:55:29 DEBUG] transformed A235Mb.SPC -> A235MB.SPC
[sigmove 12:55:29 DEBUG] transformed A235Mc.SPC -> A235MC.SPC
[sigmove 12:55:29 DEBUG] transformed A235Md.SPC -> A235MD.SPC
[sigmove 12:55:29 DEBUG] transformed A235Me.SPC -> A235ME.SPC
[sigmove 12:55:29 DEBUG] transformed A235Mf.SPC -> A235MF.SPC
[Status 12:55:29 INFO] data for A235 transferred to science data processing
[Tidy 12:55:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:55:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:55:29 INFO] resetting WatchDogTimer
[Status 12:55:30 INFO] Starting Set [AERI set: name S235, 6 scans, 0 angle, D16300 command]
[Ingest 12:55:30 INFO] Sending XML status message
[Status 12:55:30 INFO] Mirror angle: 0
[Mirror 12:55:30 INFO] rotating to position S
[Status 12:55:31 INFO] .SET file for ACQ96 ready
[Ingest 12:55:32 INFO] Starting acquisition
[Status 12:55:32 INFO] reading housekeeping
[Status 12:55:50 INFO] acquire complete
[Status 12:55:51 INFO] writing housekeeping
[Sequencer 12:55:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:55:51 INFO] incremented S scene to 235 completed views
[Sequencer 12:55:51 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:55:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:55:51 INFO] incremented to [AERI set: name T235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:55:51 INFO] S235.SIG(18)
[sigmove 12:55:51 DEBUG] transformed S235Ma.SPC -> S235MA.SPC
[sigmove 12:55:51 DEBUG] transformed S235Mb.SPC -> S235MB.SPC
[sigmove 12:55:51 DEBUG] transformed S235Mc.SPC -> S235MC.SPC
[sigmove 12:55:51 DEBUG] transformed S235Md.SPC -> S235MD.SPC
[sigmove 12:55:51 DEBUG] transformed S235Me.SPC -> S235ME.SPC
[sigmove 12:55:51 DEBUG] transformed S235Mf.SPC -> S235MF.SPC
[Status 12:55:51 INFO] data for S235 transferred to science data processing
[Tidy 12:55:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:55:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:55:51 INFO] resetting WatchDogTimer
[Status 12:55:51 INFO] Starting Set [AERI set: name T235, 6 scans, 0 angle, D16300 command]
[Ingest 12:55:51 INFO] Sending XML status message
[Status 12:55:51 INFO] Mirror angle: 0
[Mirror 12:55:51 INFO] rotating to position T
[Status 12:55:52 INFO] .SET file for ACQ96 ready
[Ingest 12:55:52 INFO] Starting acquisition
[Status 12:55:52 INFO] reading housekeeping
[Status 12:56:10 INFO] acquire complete
[Status 12:56:11 INFO] writing housekeeping
[Sequencer 12:56:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:56:11 INFO] incremented T scene to 235 completed views
[Sequencer 12:56:11 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:56:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:56:11 INFO] incremented to [AERI set: name U235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:56:11 INFO] T235.SIG(18)
[sigmove 12:56:11 DEBUG] transformed T235Ma.SPC -> T235MA.SPC
[sigmove 12:56:11 DEBUG] transformed T235Mb.SPC -> T235MB.SPC
[sigmove 12:56:11 DEBUG] transformed T235Mc.SPC -> T235MC.SPC
[sigmove 12:56:11 DEBUG] transformed T235Md.SPC -> T235MD.SPC
[sigmove 12:56:11 DEBUG] transformed T235Me.SPC -> T235ME.SPC
[sigmove 12:56:11 DEBUG] transformed T235Mf.SPC -> T235MF.SPC
[Status 12:56:11 INFO] data for T235 transferred to science data processing
[Tidy 12:56:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:56:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:56:11 INFO] resetting WatchDogTimer
[Status 12:56:11 INFO] Starting Set [AERI set: name U235, 6 scans, 0 angle, D16300 command]
[Ingest 12:56:11 INFO] Sending XML status message
[Status 12:56:11 INFO] Mirror angle: 0
[Mirror 12:56:11 INFO] rotating to position U
[Status 12:56:12 INFO] .SET file for ACQ96 ready
[Ingest 12:56:12 INFO] Starting acquisition
[Status 12:56:12 INFO] reading housekeeping
[Status 12:56:30 INFO] acquire complete
[Status 12:56:31 INFO] writing housekeeping
[Sequencer 12:56:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:56:31 INFO] incremented U scene to 235 completed views
[Sequencer 12:56:31 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:56:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:56:31 INFO] incremented to [AERI set: name V235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:56:31 INFO] U235.SIG(18)
[sigmove 12:56:31 DEBUG] transformed U235Ma.SPC -> U235MA.SPC
[sigmove 12:56:31 DEBUG] transformed U235Mb.SPC -> U235MB.SPC
[sigmove 12:56:31 DEBUG] transformed U235Mc.SPC -> U235MC.SPC
[sigmove 12:56:31 DEBUG] transformed U235Md.SPC -> U235MD.SPC
[sigmove 12:56:31 DEBUG] transformed U235Me.SPC -> U235ME.SPC
[sigmove 12:56:31 DEBUG] transformed U235Mf.SPC -> U235MF.SPC
[Status 12:56:31 INFO] data for U235 transferred to science data processing
[Tidy 12:56:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:56:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:56:31 INFO] resetting WatchDogTimer
[Status 12:56:31 INFO] Starting Set [AERI set: name V235, 6 scans, 0 angle, D16300 command]
[Ingest 12:56:31 INFO] Sending XML status message
[Status 12:56:31 INFO] Mirror angle: 0
[Mirror 12:56:32 INFO] rotating to position V
[Status 12:56:32 INFO] .SET file for ACQ96 ready
[Ingest 12:56:32 INFO] Starting acquisition
[Status 12:56:33 INFO] reading housekeeping
[Status 12:56:50 INFO] acquire complete
[Status 12:56:51 INFO] writing housekeeping
[Sequencer 12:56:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:56:51 INFO] incremented V scene to 235 completed views
[Sequencer 12:56:51 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:56:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:56:51 INFO] incremented to [AERI set: name W235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:56:51 INFO] V235.SIG(18)
[sigmove 12:56:51 DEBUG] transformed V235Ma.SPC -> V235MA.SPC
[sigmove 12:56:51 DEBUG] transformed V235Mb.SPC -> V235MB.SPC
[sigmove 12:56:51 DEBUG] transformed V235Mc.SPC -> V235MC.SPC
[sigmove 12:56:51 DEBUG] transformed V235Md.SPC -> V235MD.SPC
[sigmove 12:56:51 DEBUG] transformed V235Me.SPC -> V235ME.SPC
[sigmove 12:56:51 DEBUG] transformed V235Mf.SPC -> V235MF.SPC
[Status 12:56:51 INFO] data for V235 transferred to science data processing
[Tidy 12:56:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:56:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:56:51 INFO] resetting WatchDogTimer
[Status 12:56:51 INFO] Starting Set [AERI set: name W235, 6 scans, 0 angle, D16300 command]
[Ingest 12:56:51 INFO] Sending XML status message
[Status 12:56:51 INFO] Mirror angle: 0
[Mirror 12:56:52 INFO] rotating to position W
[Status 12:56:52 INFO] .SET file for ACQ96 ready
[Ingest 12:56:52 INFO] Starting acquisition
[Status 12:56:53 INFO] reading housekeeping
[Status 12:57:10 INFO] acquire complete
[Status 12:57:11 INFO] writing housekeeping
[Sequencer 12:57:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:57:11 INFO] incremented W scene to 235 completed views
[Sequencer 12:57:11 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:57:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:57:11 INFO] incremented to [AERI set: name X235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:57:11 INFO] W235.SIG(18)
[sigmove 12:57:11 DEBUG] transformed W235Ma.SPC -> W235MA.SPC
[sigmove 12:57:11 DEBUG] transformed W235Mb.SPC -> W235MB.SPC
[sigmove 12:57:11 DEBUG] transformed W235Mc.SPC -> W235MC.SPC
[sigmove 12:57:11 DEBUG] transformed W235Md.SPC -> W235MD.SPC
[sigmove 12:57:11 DEBUG] transformed W235Me.SPC -> W235ME.SPC
[sigmove 12:57:11 DEBUG] transformed W235Mf.SPC -> W235MF.SPC
[Status 12:57:11 INFO] data for W235 transferred to science data processing
[Tidy 12:57:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:57:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:57:11 INFO] resetting WatchDogTimer
[Status 12:57:12 INFO] Starting Set [AERI set: name X235, 6 scans, 0 angle, D16300 command]
[Ingest 12:57:12 INFO] Sending XML status message
[Status 12:57:12 INFO] Mirror angle: 0
[Mirror 12:57:12 INFO] rotating to position X
[Status 12:57:12 INFO] .SET file for ACQ96 ready
[Ingest 12:57:13 INFO] Starting acquisition
[Status 12:57:13 INFO] reading housekeeping
[Status 12:57:31 INFO] acquire complete
[Status 12:57:31 INFO] writing housekeeping
[Sequencer 12:57:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:57:31 INFO] incremented X scene to 235 completed views
[Sequencer 12:57:31 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:57:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:57:31 INFO] incremented to [AERI set: name Y235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:57:31 INFO] X235.SIG(18)
[sigmove 12:57:31 DEBUG] transformed X235Ma.SPC -> X235MA.SPC
[sigmove 12:57:32 DEBUG] transformed X235Mb.SPC -> X235MB.SPC
[sigmove 12:57:32 DEBUG] transformed X235Mc.SPC -> X235MC.SPC
[sigmove 12:57:32 DEBUG] transformed X235Md.SPC -> X235MD.SPC
[sigmove 12:57:32 DEBUG] transformed X235Me.SPC -> X235ME.SPC
[sigmove 12:57:32 DEBUG] transformed X235Mf.SPC -> X235MF.SPC
[Status 12:57:32 INFO] data for X235 transferred to science data processing
[Tidy 12:57:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:57:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:57:32 INFO] resetting WatchDogTimer
[Status 12:57:32 INFO] Starting Set [AERI set: name Y235, 6 scans, 0 angle, D16300 command]
[Ingest 12:57:32 INFO] Sending XML status message
[Status 12:57:32 INFO] Mirror angle: 0
[Mirror 12:57:32 INFO] rotating to position Y
[Status 12:57:33 INFO] .SET file for ACQ96 ready
[Ingest 12:57:33 INFO] Starting acquisition
[Status 12:57:33 INFO] reading housekeeping
[Status 12:57:51 INFO] acquire complete
[Status 12:57:52 INFO] writing housekeeping
[Sequencer 12:57:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:57:52 INFO] incremented Y scene to 235 completed views
[Sequencer 12:57:52 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:57:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:57:52 INFO] incremented to [AERI set: name Z235, 6 scans, 0 angle, D16300 command] set
[sigmove 12:57:52 INFO] Y235.SIG(18)
[sigmove 12:57:52 DEBUG] transformed Y235Ma.SPC -> Y235MA.SPC
[sigmove 12:57:52 DEBUG] transformed Y235Mb.SPC -> Y235MB.SPC
[sigmove 12:57:52 DEBUG] transformed Y235Mc.SPC -> Y235MC.SPC
[sigmove 12:57:52 DEBUG] transformed Y235Md.SPC -> Y235MD.SPC
[sigmove 12:57:52 DEBUG] transformed Y235Me.SPC -> Y235ME.SPC
[sigmove 12:57:52 DEBUG] transformed Y235Mf.SPC -> Y235MF.SPC
[Status 12:57:52 INFO] data for Y235 transferred to science data processing
[Tidy 12:57:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:57:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:57:52 INFO] resetting WatchDogTimer
[Status 12:57:52 INFO] Starting Set [AERI set: name Z235, 6 scans, 0 angle, D16300 command]
[Ingest 12:57:52 INFO] Sending XML status message
[Status 12:57:52 INFO] Mirror angle: 0
[Mirror 12:57:52 INFO] rotating to position Z
[Status 12:57:53 INFO] .SET file for ACQ96 ready
[Ingest 12:57:53 INFO] Starting acquisition
[Status 12:57:53 INFO] reading housekeeping
[Status 12:58:11 INFO] acquire complete
[Status 12:58:12 INFO] writing housekeeping
[Sequencer 12:58:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:58:12 INFO] incremented Z scene to 235 completed views
[Sequencer 12:58:12 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 12:58:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:58:12 INFO] incremented to [AERI set: name A236, 6 scans, 120 angle, D28300 command] set
[sigmove 12:58:12 INFO] Z235.SIG(18)
[sigmove 12:58:12 DEBUG] transformed Z235Ma.SPC -> Z235MA.SPC
[sigmove 12:58:12 DEBUG] transformed Z235Mb.SPC -> Z235MB.SPC
[sigmove 12:58:12 DEBUG] transformed Z235Mc.SPC -> Z235MC.SPC
[sigmove 12:58:12 DEBUG] transformed Z235Md.SPC -> Z235MD.SPC
[sigmove 12:58:12 DEBUG] transformed Z235Me.SPC -> Z235ME.SPC
[sigmove 12:58:12 DEBUG] transformed Z235Mf.SPC -> Z235MF.SPC
[Status 12:58:12 INFO] data for Z235 transferred to science data processing
[Tidy 12:58:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:58:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:58:12 INFO] resetting WatchDogTimer
[Status 12:58:12 INFO] Starting Set [AERI set: name A236, 6 scans, 120 angle, D28300 command]
[Ingest 12:58:12 INFO] Sending XML status message
[Status 12:58:12 INFO] Mirror angle: 120
[Mirror 12:58:13 INFO] rotating to position A
[Status 12:58:14 INFO] .SET file for ACQ96 ready
[Ingest 12:58:14 INFO] Starting acquisition
[Status 12:58:15 INFO] reading housekeeping
[Status 12:58:32 INFO] acquire complete
[Status 12:58:33 INFO] writing housekeeping
[Sequencer 12:58:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:58:33 INFO] incremented A scene to 236 completed views
[Sequencer 12:58:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 12:58:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:58:33 INFO] incremented to [AERI set: name H236, 6 scans, 60 angle, D22500 command] set
[sigmove 12:58:33 INFO] A236.SIG(18)
[sigmove 12:58:33 DEBUG] transformed A236Ma.SPC -> A236MA.SPC
[sigmove 12:58:33 DEBUG] transformed A236Mb.SPC -> A236MB.SPC
[sigmove 12:58:33 DEBUG] transformed A236Mc.SPC -> A236MC.SPC
[sigmove 12:58:33 DEBUG] transformed A236Md.SPC -> A236MD.SPC
[sigmove 12:58:33 DEBUG] transformed A236Me.SPC -> A236ME.SPC
[sigmove 12:58:33 DEBUG] transformed A236Mf.SPC -> A236MF.SPC
[Status 12:58:33 INFO] data for A236 transferred to science data processing
[Tidy 12:58:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:58:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:58:33 INFO] resetting WatchDogTimer
[Status 12:58:34 INFO] Starting Set [AERI set: name H236, 6 scans, 60 angle, D22500 command]
[Ingest 12:58:34 INFO] Sending XML status message
[Status 12:58:34 INFO] Mirror angle: 60
[Mirror 12:58:34 INFO] rotating to position H
[Status 12:58:35 INFO] .SET file for ACQ96 ready
[Ingest 12:58:35 INFO] Starting acquisition
[Status 12:58:35 INFO] reading housekeeping
[Status 12:58:54 INFO] acquire complete
[Status 12:58:55 INFO] writing housekeeping
[Sequencer 12:58:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:58:55 INFO] incremented H scene to 236 completed views
[Sequencer 12:58:55 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 12:58:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:58:55 INFO] incremented to [AERI set: name S236, 6 scans, 0 angle, D16300 command] set
[sigmove 12:58:55 INFO] H236.SIG(18)
[sigmove 12:58:55 DEBUG] transformed H236Ma.SPC -> H236MA.SPC
[sigmove 12:58:55 DEBUG] transformed H236Mb.SPC -> H236MB.SPC
[sigmove 12:58:55 DEBUG] transformed H236Mc.SPC -> H236MC.SPC
[sigmove 12:58:55 DEBUG] transformed H236Md.SPC -> H236MD.SPC
[sigmove 12:58:55 DEBUG] transformed H236Me.SPC -> H236ME.SPC
[sigmove 12:58:55 DEBUG] transformed H236Mf.SPC -> H236MF.SPC
[Status 12:58:55 INFO] data for H236 transferred to science data processing
[Tidy 12:58:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:58:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:58:55 INFO] resetting WatchDogTimer
[Status 12:58:55 INFO] Starting Set [AERI set: name S236, 6 scans, 0 angle, D16300 command]
[Ingest 12:58:55 INFO] Sending XML status message
[Status 12:58:55 INFO] Mirror angle: 0
[Mirror 12:58:55 INFO] rotating to position S
[Status 12:58:56 INFO] .SET file for ACQ96 ready
[Ingest 12:58:56 INFO] Starting acquisition
[Status 12:58:57 INFO] reading housekeeping
[Status 12:59:14 INFO] acquire complete
[Status 12:59:15 INFO] writing housekeeping
[Sequencer 12:59:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:59:15 INFO] incremented S scene to 236 completed views
[Sequencer 12:59:15 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:59:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:59:15 INFO] incremented to [AERI set: name T236, 6 scans, 0 angle, D16300 command] set
[sigmove 12:59:15 INFO] S236.SIG(18)
[sigmove 12:59:15 DEBUG] transformed S236Ma.SPC -> S236MA.SPC
[sigmove 12:59:15 DEBUG] transformed S236Mb.SPC -> S236MB.SPC
[sigmove 12:59:15 DEBUG] transformed S236Mc.SPC -> S236MC.SPC
[sigmove 12:59:15 DEBUG] transformed S236Md.SPC -> S236MD.SPC
[sigmove 12:59:15 DEBUG] transformed S236Me.SPC -> S236ME.SPC
[sigmove 12:59:15 DEBUG] transformed S236Mf.SPC -> S236MF.SPC
[Status 12:59:15 INFO] data for S236 transferred to science data processing
[Tidy 12:59:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:59:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:59:15 INFO] resetting WatchDogTimer
[Status 12:59:15 INFO] Starting Set [AERI set: name T236, 6 scans, 0 angle, D16300 command]
[Ingest 12:59:15 INFO] Sending XML status message
[Status 12:59:15 INFO] Mirror angle: 0
[Mirror 12:59:16 INFO] rotating to position T
[Status 12:59:16 INFO] .SET file for ACQ96 ready
[Ingest 12:59:16 INFO] Starting acquisition
[Status 12:59:17 INFO] reading housekeeping
[Status 12:59:34 INFO] acquire complete
[Status 12:59:35 INFO] writing housekeeping
[Sequencer 12:59:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:59:35 INFO] incremented T scene to 236 completed views
[Sequencer 12:59:35 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:59:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:59:35 INFO] incremented to [AERI set: name U236, 6 scans, 0 angle, D16300 command] set
[sigmove 12:59:35 INFO] T236.SIG(18)
[sigmove 12:59:35 DEBUG] transformed T236Ma.SPC -> T236MA.SPC
[sigmove 12:59:35 DEBUG] transformed T236Mb.SPC -> T236MB.SPC
[sigmove 12:59:35 DEBUG] transformed T236Mc.SPC -> T236MC.SPC
[sigmove 12:59:35 DEBUG] transformed T236Md.SPC -> T236MD.SPC
[sigmove 12:59:35 DEBUG] transformed T236Me.SPC -> T236ME.SPC
[sigmove 12:59:35 DEBUG] transformed T236Mf.SPC -> T236MF.SPC
[Status 12:59:35 INFO] data for T236 transferred to science data processing
[Tidy 12:59:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:59:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:59:35 INFO] resetting WatchDogTimer
[Status 12:59:35 INFO] Starting Set [AERI set: name U236, 6 scans, 0 angle, D16300 command]
[Ingest 12:59:35 INFO] Sending XML status message
[Status 12:59:35 INFO] Mirror angle: 0
[Mirror 12:59:36 INFO] rotating to position U
[Status 12:59:36 INFO] .SET file for ACQ96 ready
[Ingest 12:59:36 INFO] Starting acquisition
[Status 12:59:37 INFO] reading housekeeping
[Status 12:59:54 INFO] acquire complete
[Status 12:59:55 INFO] writing housekeeping
[Sequencer 12:59:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 12:59:55 INFO] incremented U scene to 236 completed views
[Sequencer 12:59:55 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 12:59:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 12:59:55 INFO] incremented to [AERI set: name V236, 6 scans, 0 angle, D16300 command] set
[sigmove 12:59:55 INFO] U236.SIG(18)
[sigmove 12:59:55 DEBUG] transformed U236Ma.SPC -> U236MA.SPC
[sigmove 12:59:55 DEBUG] transformed U236Mb.SPC -> U236MB.SPC
[sigmove 12:59:55 DEBUG] transformed U236Mc.SPC -> U236MC.SPC
[sigmove 12:59:55 DEBUG] transformed U236Md.SPC -> U236MD.SPC
[sigmove 12:59:55 DEBUG] transformed U236Me.SPC -> U236ME.SPC
[sigmove 12:59:55 DEBUG] transformed U236Mf.SPC -> U236MF.SPC
[Status 12:59:55 INFO] data for U236 transferred to science data processing
[Tidy 12:59:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 12:59:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 12:59:55 INFO] resetting WatchDogTimer
[Status 12:59:55 INFO] Starting Set [AERI set: name V236, 6 scans, 0 angle, D16300 command]
[Ingest 12:59:55 INFO] Sending XML status message
[Status 12:59:55 INFO] Mirror angle: 0
[Mirror 12:59:56 INFO] rotating to position V
[Status 12:59:56 INFO] .SET file for ACQ96 ready
[Ingest 12:59:56 INFO] Starting acquisition
[Status 12:59:57 INFO] reading housekeeping
[Status 13:00:14 INFO] acquire complete
[Status 13:00:15 INFO] writing housekeeping
[Sequencer 13:00:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:00:15 INFO] incremented V scene to 236 completed views
[Sequencer 13:00:15 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:00:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:00:15 INFO] incremented to [AERI set: name W236, 6 scans, 0 angle, D16300 command] set
[sigmove 13:00:15 INFO] V236.SIG(18)
[sigmove 13:00:15 DEBUG] transformed V236Ma.SPC -> V236MA.SPC
[sigmove 13:00:15 DEBUG] transformed V236Mb.SPC -> V236MB.SPC
[sigmove 13:00:15 DEBUG] transformed V236Mc.SPC -> V236MC.SPC
[sigmove 13:00:15 DEBUG] transformed V236Md.SPC -> V236MD.SPC
[sigmove 13:00:15 DEBUG] transformed V236Me.SPC -> V236ME.SPC
[sigmove 13:00:15 DEBUG] transformed V236Mf.SPC -> V236MF.SPC
[Status 13:00:15 INFO] data for V236 transferred to science data processing
[Tidy 13:00:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:00:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:00:15 INFO] resetting WatchDogTimer
[Status 13:00:16 INFO] Starting Set [AERI set: name W236, 6 scans, 0 angle, D16300 command]
[Ingest 13:00:16 INFO] Sending XML status message
[Status 13:00:16 INFO] Mirror angle: 0
[Mirror 13:00:16 INFO] rotating to position W
[Status 13:00:16 INFO] .SET file for ACQ96 ready
[Ingest 13:00:17 INFO] Starting acquisition
[Status 13:00:17 INFO] reading housekeeping
[Status 13:00:35 INFO] acquire complete
[Status 13:00:36 INFO] writing housekeeping
[Sequencer 13:00:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:00:36 INFO] incremented W scene to 236 completed views
[Sequencer 13:00:36 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:00:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:00:36 INFO] incremented to [AERI set: name X236, 6 scans, 0 angle, D16300 command] set
[sigmove 13:00:36 INFO] W236.SIG(18)
[sigmove 13:00:36 DEBUG] transformed W236Ma.SPC -> W236MA.SPC
[sigmove 13:00:36 DEBUG] transformed W236Mb.SPC -> W236MB.SPC
[sigmove 13:00:36 DEBUG] transformed W236Mc.SPC -> W236MC.SPC
[sigmove 13:00:36 DEBUG] transformed W236Md.SPC -> W236MD.SPC
[sigmove 13:00:36 DEBUG] transformed W236Me.SPC -> W236ME.SPC
[sigmove 13:00:36 DEBUG] transformed W236Mf.SPC -> W236MF.SPC
[Status 13:00:36 INFO] data for W236 transferred to science data processing
[Tidy 13:00:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:00:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:00:36 INFO] resetting WatchDogTimer
[Status 13:00:36 INFO] Starting Set [AERI set: name X236, 6 scans, 0 angle, D16300 command]
[Ingest 13:00:36 INFO] Sending XML status message
[Status 13:00:36 INFO] Mirror angle: 0
[Mirror 13:00:36 INFO] rotating to position X
[Status 13:00:37 INFO] .SET file for ACQ96 ready
[Ingest 13:00:37 INFO] Starting acquisition
[Status 13:00:37 INFO] reading housekeeping
[Status 13:00:55 INFO] acquire complete
[Status 13:00:56 INFO] writing housekeeping
[Sequencer 13:00:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:00:56 INFO] incremented X scene to 236 completed views
[Sequencer 13:00:56 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:00:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:00:56 INFO] incremented to [AERI set: name Y236, 6 scans, 0 angle, D16300 command] set
[sigmove 13:00:56 INFO] X236.SIG(18)
[sigmove 13:00:56 DEBUG] transformed X236Ma.SPC -> X236MA.SPC
[sigmove 13:00:56 DEBUG] transformed X236Mb.SPC -> X236MB.SPC
[sigmove 13:00:56 DEBUG] transformed X236Mc.SPC -> X236MC.SPC
[sigmove 13:00:56 DEBUG] transformed X236Md.SPC -> X236MD.SPC
[sigmove 13:00:56 DEBUG] transformed X236Me.SPC -> X236ME.SPC
[sigmove 13:00:56 DEBUG] transformed X236Mf.SPC -> X236MF.SPC
[Status 13:00:56 INFO] data for X236 transferred to science data processing
[Tidy 13:00:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:00:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:00:56 INFO] resetting WatchDogTimer
[Status 13:00:56 INFO] Starting Set [AERI set: name Y236, 6 scans, 0 angle, D16300 command]
[Ingest 13:00:56 INFO] Sending XML status message
[Status 13:00:56 INFO] Mirror angle: 0
[Mirror 13:00:56 INFO] rotating to position Y
[Status 13:00:57 INFO] .SET file for ACQ96 ready
[Ingest 13:00:57 INFO] Starting acquisition
[Status 13:00:57 INFO] reading housekeeping
[Status 13:01:15 INFO] acquire complete
[Status 13:01:16 INFO] writing housekeeping
[Sequencer 13:01:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:01:16 INFO] incremented Y scene to 236 completed views
[Sequencer 13:01:16 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:01:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:01:16 INFO] incremented to [AERI set: name Z236, 6 scans, 0 angle, D16300 command] set
[sigmove 13:01:16 INFO] Y236.SIG(18)
[sigmove 13:01:16 DEBUG] transformed Y236Ma.SPC -> Y236MA.SPC
[sigmove 13:01:16 DEBUG] transformed Y236Mb.SPC -> Y236MB.SPC
[sigmove 13:01:16 DEBUG] transformed Y236Mc.SPC -> Y236MC.SPC
[sigmove 13:01:16 DEBUG] transformed Y236Md.SPC -> Y236MD.SPC
[sigmove 13:01:16 DEBUG] transformed Y236Me.SPC -> Y236ME.SPC
[sigmove 13:01:16 DEBUG] transformed Y236Mf.SPC -> Y236MF.SPC
[Status 13:01:16 INFO] data for Y236 transferred to science data processing
[Tidy 13:01:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:01:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:01:16 INFO] resetting WatchDogTimer
[Status 13:01:16 INFO] Starting Set [AERI set: name Z236, 6 scans, 0 angle, D16300 command]
[Ingest 13:01:16 INFO] Sending XML status message
[Status 13:01:16 INFO] Mirror angle: 0
[Mirror 13:01:17 INFO] rotating to position Z
[Status 13:01:17 INFO] .SET file for ACQ96 ready
[Ingest 13:01:17 INFO] Starting acquisition
[Status 13:01:18 INFO] reading housekeeping
[Status 13:01:35 INFO] acquire complete
[Status 13:01:36 INFO] writing housekeeping
[Sequencer 13:01:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:01:36 INFO] incremented Z scene to 236 completed views
[Sequencer 13:01:36 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:01:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:01:36 INFO] incremented to [AERI set: name H237, 6 scans, 60 angle, D22500 command] set
[sigmove 13:01:36 INFO] Z236.SIG(18)
[sigmove 13:01:36 DEBUG] transformed Z236Ma.SPC -> Z236MA.SPC
[sigmove 13:01:36 DEBUG] transformed Z236Mb.SPC -> Z236MB.SPC
[sigmove 13:01:36 DEBUG] transformed Z236Mc.SPC -> Z236MC.SPC
[sigmove 13:01:36 DEBUG] transformed Z236Md.SPC -> Z236MD.SPC
[sigmove 13:01:36 DEBUG] transformed Z236Me.SPC -> Z236ME.SPC
[sigmove 13:01:36 DEBUG] transformed Z236Mf.SPC -> Z236MF.SPC
[Status 13:01:36 INFO] data for Z236 transferred to science data processing
[Tidy 13:01:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:01:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:01:36 INFO] resetting WatchDogTimer
[Status 13:01:36 INFO] Starting Set [AERI set: name H237, 6 scans, 60 angle, D22500 command]
[Ingest 13:01:36 INFO] Sending XML status message
[Status 13:01:36 INFO] Mirror angle: 60
[Mirror 13:01:37 INFO] rotating to position H
[Status 13:01:38 INFO] .SET file for ACQ96 ready
[Ingest 13:01:38 INFO] Starting acquisition
[Status 13:01:38 INFO] reading housekeeping
[Status 13:01:57 INFO] acquire complete
[Status 13:01:57 INFO] writing housekeeping
[Sequencer 13:01:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:01:57 INFO] incremented H scene to 237 completed views
[Sequencer 13:01:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:01:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:01:57 INFO] incremented to [AERI set: name A237, 6 scans, 120 angle, D28300 command] set
[sigmove 13:01:57 INFO] H237.SIG(18)
[sigmove 13:01:57 DEBUG] transformed H237Ma.SPC -> H237MA.SPC
[sigmove 13:01:57 DEBUG] transformed H237Mb.SPC -> H237MB.SPC
[sigmove 13:01:57 DEBUG] transformed H237Mc.SPC -> H237MC.SPC
[sigmove 13:01:57 DEBUG] transformed H237Md.SPC -> H237MD.SPC
[sigmove 13:01:57 DEBUG] transformed H237Me.SPC -> H237ME.SPC
[sigmove 13:01:57 DEBUG] transformed H237Mf.SPC -> H237MF.SPC
[Status 13:01:57 INFO] data for H237 transferred to science data processing
[Tidy 13:01:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:01:58 INFO] A235.FIN(19),H235.FIN(19),S235.FIN(19),T235.FIN(19),U235.FIN(19),V235.FIN(19),W235.FIN(19),X235.FIN(19),Y235.FIN(19),Z235.FIN(19),A236.FIN(19),H236.FIN(19),S236.FIN(19),T236.FIN(19),U236.FIN(19),V236.FIN(19),W236.FIN(19),X236.FIN(19),Y236.FIN(19),Z236.FIN(19)
[sigmove 13:01:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:01:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:02:02 DEBUG] done zipping
[WatchDog 13:02:02 INFO] resetting WatchDogTimer
[Status 13:02:02 INFO] Starting Set [AERI set: name A237, 6 scans, 120 angle, D28300 command]
[Ingest 13:02:02 INFO] Sending XML status message
[Status 13:02:02 INFO] Mirror angle: 120
[Mirror 13:02:03 INFO] rotating to position A
[Status 13:02:04 INFO] .SET file for ACQ96 ready
[Ingest 13:02:04 INFO] Starting acquisition
[Status 13:02:04 INFO] reading housekeeping
[Status 13:02:22 INFO] acquire complete
[Status 13:02:23 INFO] writing housekeeping
[Sequencer 13:02:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:02:23 INFO] incremented A scene to 237 completed views
[Sequencer 13:02:23 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:02:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:02:23 INFO] incremented to [AERI set: name S237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:02:23 INFO] A237.SIG(18)
[sigmove 13:02:23 DEBUG] transformed A237Ma.SPC -> A237MA.SPC
[sigmove 13:02:23 DEBUG] transformed A237Mb.SPC -> A237MB.SPC
[sigmove 13:02:23 DEBUG] transformed A237Mc.SPC -> A237MC.SPC
[sigmove 13:02:23 DEBUG] transformed A237Md.SPC -> A237MD.SPC
[sigmove 13:02:23 DEBUG] transformed A237Me.SPC -> A237ME.SPC
[sigmove 13:02:23 DEBUG] transformed A237Mf.SPC -> A237MF.SPC
[Status 13:02:23 INFO] data for A237 transferred to science data processing
[Tidy 13:02:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:02:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:02:23 INFO] resetting WatchDogTimer
[Status 13:02:24 INFO] Starting Set [AERI set: name S237, 6 scans, 0 angle, D16300 command]
[Ingest 13:02:24 INFO] Sending XML status message
[Status 13:02:24 INFO] Mirror angle: 0
[Mirror 13:02:24 INFO] rotating to position S
[Status 13:02:25 INFO] .SET file for ACQ96 ready
[Ingest 13:02:26 INFO] Starting acquisition
[Status 13:02:26 INFO] reading housekeeping
[Status 13:02:44 INFO] acquire complete
[Status 13:02:45 INFO] writing housekeeping
[Sequencer 13:02:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:02:45 INFO] incremented S scene to 237 completed views
[Sequencer 13:02:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:02:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:02:45 INFO] incremented to [AERI set: name T237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:02:45 INFO] S237.SIG(18)
[sigmove 13:02:45 DEBUG] transformed S237Ma.SPC -> S237MA.SPC
[sigmove 13:02:45 DEBUG] transformed S237Mb.SPC -> S237MB.SPC
[sigmove 13:02:45 DEBUG] transformed S237Mc.SPC -> S237MC.SPC
[sigmove 13:02:45 DEBUG] transformed S237Md.SPC -> S237MD.SPC
[sigmove 13:02:45 DEBUG] transformed S237Me.SPC -> S237ME.SPC
[sigmove 13:02:45 DEBUG] transformed S237Mf.SPC -> S237MF.SPC
[Status 13:02:45 INFO] data for S237 transferred to science data processing
[Tidy 13:02:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:02:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:02:45 INFO] resetting WatchDogTimer
[Status 13:02:45 INFO] Starting Set [AERI set: name T237, 6 scans, 0 angle, D16300 command]
[Ingest 13:02:45 INFO] Sending XML status message
[Status 13:02:45 INFO] Mirror angle: 0
[Mirror 13:02:45 INFO] rotating to position T
[Status 13:02:46 INFO] .SET file for ACQ96 ready
[Ingest 13:02:46 INFO] Starting acquisition
[Status 13:02:46 INFO] reading housekeeping
[Status 13:03:04 INFO] acquire complete
[Status 13:03:05 INFO] writing housekeeping
[Sequencer 13:03:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:03:05 INFO] incremented T scene to 237 completed views
[Sequencer 13:03:05 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:03:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:03:05 INFO] incremented to [AERI set: name U237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:03:05 INFO] T237.SIG(18)
[sigmove 13:03:05 DEBUG] transformed T237Ma.SPC -> T237MA.SPC
[sigmove 13:03:05 DEBUG] transformed T237Mb.SPC -> T237MB.SPC
[sigmove 13:03:05 DEBUG] transformed T237Mc.SPC -> T237MC.SPC
[sigmove 13:03:05 DEBUG] transformed T237Md.SPC -> T237MD.SPC
[sigmove 13:03:05 DEBUG] transformed T237Me.SPC -> T237ME.SPC
[sigmove 13:03:05 DEBUG] transformed T237Mf.SPC -> T237MF.SPC
[Status 13:03:05 INFO] data for T237 transferred to science data processing
[Tidy 13:03:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:03:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:03:05 INFO] resetting WatchDogTimer
[Status 13:03:05 INFO] Starting Set [AERI set: name U237, 6 scans, 0 angle, D16300 command]
[Ingest 13:03:05 INFO] Sending XML status message
[Status 13:03:05 INFO] Mirror angle: 0
[Mirror 13:03:06 INFO] rotating to position U
[Status 13:03:06 INFO] .SET file for ACQ96 ready
[Ingest 13:03:07 INFO] Starting acquisition
[Status 13:03:07 INFO] reading housekeeping
[Status 13:03:25 INFO] acquire complete
[Status 13:03:26 INFO] writing housekeeping
[Sequencer 13:03:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:03:26 INFO] incremented U scene to 237 completed views
[Sequencer 13:03:26 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:03:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:03:26 INFO] incremented to [AERI set: name V237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:03:26 INFO] U237.SIG(18)
[sigmove 13:03:26 DEBUG] transformed U237Ma.SPC -> U237MA.SPC
[sigmove 13:03:26 DEBUG] transformed U237Mb.SPC -> U237MB.SPC
[sigmove 13:03:26 DEBUG] transformed U237Mc.SPC -> U237MC.SPC
[sigmove 13:03:26 DEBUG] transformed U237Md.SPC -> U237MD.SPC
[sigmove 13:03:26 DEBUG] transformed U237Me.SPC -> U237ME.SPC
[sigmove 13:03:26 DEBUG] transformed U237Mf.SPC -> U237MF.SPC
[Status 13:03:26 INFO] data for U237 transferred to science data processing
[Tidy 13:03:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:03:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:03:26 INFO] resetting WatchDogTimer
[Status 13:03:26 INFO] Starting Set [AERI set: name V237, 6 scans, 0 angle, D16300 command]
[Ingest 13:03:26 INFO] Sending XML status message
[Status 13:03:26 INFO] Mirror angle: 0
[Mirror 13:03:27 INFO] rotating to position V
[Status 13:03:27 INFO] .SET file for ACQ96 ready
[Ingest 13:03:27 INFO] Starting acquisition
[Status 13:03:28 INFO] reading housekeeping
[Status 13:03:45 INFO] acquire complete
[Status 13:03:46 INFO] writing housekeeping
[Sequencer 13:03:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:03:46 INFO] incremented V scene to 237 completed views
[Sequencer 13:03:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:03:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:03:46 INFO] incremented to [AERI set: name W237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:03:46 INFO] V237.SIG(18)
[sigmove 13:03:46 DEBUG] transformed V237Ma.SPC -> V237MA.SPC
[sigmove 13:03:46 DEBUG] transformed V237Mb.SPC -> V237MB.SPC
[sigmove 13:03:46 DEBUG] transformed V237Mc.SPC -> V237MC.SPC
[sigmove 13:03:46 DEBUG] transformed V237Md.SPC -> V237MD.SPC
[sigmove 13:03:46 DEBUG] transformed V237Me.SPC -> V237ME.SPC
[sigmove 13:03:46 DEBUG] transformed V237Mf.SPC -> V237MF.SPC
[Status 13:03:46 INFO] data for V237 transferred to science data processing
[Tidy 13:03:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:03:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:03:46 INFO] resetting WatchDogTimer
[Status 13:03:47 INFO] Starting Set [AERI set: name W237, 6 scans, 0 angle, D16300 command]
[Ingest 13:03:47 INFO] Sending XML status message
[Status 13:03:47 INFO] Mirror angle: 0
[Mirror 13:03:47 INFO] rotating to position W
[Status 13:03:47 INFO] .SET file for ACQ96 ready
[Ingest 13:03:48 INFO] Starting acquisition
[Status 13:03:48 INFO] reading housekeeping
[Status 13:04:06 INFO] acquire complete
[Status 13:04:06 INFO] writing housekeeping
[Sequencer 13:04:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:04:06 INFO] incremented W scene to 237 completed views
[Sequencer 13:04:06 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:04:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:04:06 INFO] incremented to [AERI set: name X237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:04:06 INFO] W237.SIG(18)
[sigmove 13:04:06 DEBUG] transformed W237Ma.SPC -> W237MA.SPC
[sigmove 13:04:06 DEBUG] transformed W237Mb.SPC -> W237MB.SPC
[sigmove 13:04:06 DEBUG] transformed W237Mc.SPC -> W237MC.SPC
[sigmove 13:04:06 DEBUG] transformed W237Md.SPC -> W237MD.SPC
[sigmove 13:04:06 DEBUG] transformed W237Me.SPC -> W237ME.SPC
[sigmove 13:04:06 DEBUG] transformed W237Mf.SPC -> W237MF.SPC
[Status 13:04:06 INFO] data for W237 transferred to science data processing
[Tidy 13:04:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:04:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:04:06 INFO] resetting WatchDogTimer
[Status 13:04:07 INFO] Starting Set [AERI set: name X237, 6 scans, 0 angle, D16300 command]
[Ingest 13:04:07 INFO] Sending XML status message
[Status 13:04:07 INFO] Mirror angle: 0
[Mirror 13:04:07 INFO] rotating to position X
[Status 13:04:07 INFO] .SET file for ACQ96 ready
[Ingest 13:04:08 INFO] Starting acquisition
[Status 13:04:08 INFO] reading housekeeping
[Status 13:04:26 INFO] acquire complete
[Status 13:04:27 INFO] writing housekeeping
[Sequencer 13:04:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:04:27 INFO] incremented X scene to 237 completed views
[Sequencer 13:04:27 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:04:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:04:27 INFO] incremented to [AERI set: name Y237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:04:27 INFO] X237.SIG(18)
[sigmove 13:04:27 DEBUG] transformed X237Ma.SPC -> X237MA.SPC
[sigmove 13:04:27 DEBUG] transformed X237Mb.SPC -> X237MB.SPC
[sigmove 13:04:27 DEBUG] transformed X237Mc.SPC -> X237MC.SPC
[sigmove 13:04:27 DEBUG] transformed X237Md.SPC -> X237MD.SPC
[sigmove 13:04:27 DEBUG] transformed X237Me.SPC -> X237ME.SPC
[sigmove 13:04:27 DEBUG] transformed X237Mf.SPC -> X237MF.SPC
[Status 13:04:27 INFO] data for X237 transferred to science data processing
[Tidy 13:04:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:04:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:04:27 INFO] resetting WatchDogTimer
[Status 13:04:27 INFO] Starting Set [AERI set: name Y237, 6 scans, 0 angle, D16300 command]
[Ingest 13:04:27 INFO] Sending XML status message
[Status 13:04:27 INFO] Mirror angle: 0
[Mirror 13:04:27 INFO] rotating to position Y
[Status 13:04:28 INFO] .SET file for ACQ96 ready
[Ingest 13:04:28 INFO] Starting acquisition
[Status 13:04:28 INFO] reading housekeeping
[Status 13:04:46 INFO] acquire complete
[Status 13:04:47 INFO] writing housekeeping
[Sequencer 13:04:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:04:47 INFO] incremented Y scene to 237 completed views
[Sequencer 13:04:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:04:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:04:47 INFO] incremented to [AERI set: name Z237, 6 scans, 0 angle, D16300 command] set
[sigmove 13:04:47 INFO] Y237.SIG(18)
[sigmove 13:04:47 DEBUG] transformed Y237Ma.SPC -> Y237MA.SPC
[sigmove 13:04:47 DEBUG] transformed Y237Mb.SPC -> Y237MB.SPC
[sigmove 13:04:47 DEBUG] transformed Y237Mc.SPC -> Y237MC.SPC
[sigmove 13:04:47 DEBUG] transformed Y237Md.SPC -> Y237MD.SPC
[sigmove 13:04:47 DEBUG] transformed Y237Me.SPC -> Y237ME.SPC
[sigmove 13:04:47 DEBUG] transformed Y237Mf.SPC -> Y237MF.SPC
[Status 13:04:47 INFO] data for Y237 transferred to science data processing
[Tidy 13:04:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:04:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:04:47 INFO] resetting WatchDogTimer
[Status 13:04:47 INFO] Starting Set [AERI set: name Z237, 6 scans, 0 angle, D16300 command]
[Ingest 13:04:47 INFO] Sending XML status message
[Status 13:04:47 INFO] Mirror angle: 0
[Mirror 13:04:47 INFO] rotating to position Z
[Status 13:04:48 INFO] .SET file for ACQ96 ready
[Ingest 13:04:48 INFO] Starting acquisition
[Status 13:04:49 INFO] reading housekeeping
[Status 13:05:06 INFO] acquire complete
[Status 13:05:07 INFO] writing housekeeping
[Sequencer 13:05:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:05:07 INFO] incremented Z scene to 237 completed views
[Sequencer 13:05:07 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:05:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:05:07 INFO] incremented to [AERI set: name A238, 6 scans, 120 angle, D28300 command] set
[sigmove 13:05:07 INFO] Z237.SIG(18)
[sigmove 13:05:07 DEBUG] transformed Z237Ma.SPC -> Z237MA.SPC
[sigmove 13:05:07 DEBUG] transformed Z237Mb.SPC -> Z237MB.SPC
[sigmove 13:05:07 DEBUG] transformed Z237Mc.SPC -> Z237MC.SPC
[sigmove 13:05:07 DEBUG] transformed Z237Md.SPC -> Z237MD.SPC
[sigmove 13:05:07 DEBUG] transformed Z237Me.SPC -> Z237ME.SPC
[sigmove 13:05:07 DEBUG] transformed Z237Mf.SPC -> Z237MF.SPC
[Status 13:05:07 INFO] data for Z237 transferred to science data processing
[Tidy 13:05:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:05:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:05:07 INFO] resetting WatchDogTimer
[Status 13:05:07 INFO] Starting Set [AERI set: name A238, 6 scans, 120 angle, D28300 command]
[Ingest 13:05:07 INFO] Sending XML status message
[Status 13:05:07 INFO] Mirror angle: 120
[Mirror 13:05:08 INFO] rotating to position A
[Status 13:05:09 INFO] .SET file for ACQ96 ready
[Ingest 13:05:09 INFO] Starting acquisition
[Status 13:05:10 INFO] reading housekeeping
[Status 13:05:32 INFO] acquire complete
[Status 13:05:33 INFO] writing housekeeping
[Sequencer 13:05:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:05:33 INFO] incremented A scene to 238 completed views
[Sequencer 13:05:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:05:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:05:33 INFO] incremented to [AERI set: name H238, 6 scans, 60 angle, D22500 command] set
[sigmove 13:05:33 INFO] A238.SIG(18)
[sigmove 13:05:33 DEBUG] transformed A238Ma.SPC -> A238MA.SPC
[sigmove 13:05:33 DEBUG] transformed A238Mb.SPC -> A238MB.SPC
[sigmove 13:05:33 DEBUG] transformed A238Mc.SPC -> A238MC.SPC
[sigmove 13:05:33 DEBUG] transformed A238Md.SPC -> A238MD.SPC
[sigmove 13:05:33 DEBUG] transformed A238Me.SPC -> A238ME.SPC
[sigmove 13:05:33 DEBUG] transformed A238Mf.SPC -> A238MF.SPC
[Status 13:05:33 INFO] data for A238 transferred to science data processing
[Tidy 13:05:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:05:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:05:33 INFO] resetting WatchDogTimer
[Status 13:05:33 INFO] Starting Set [AERI set: name H238, 6 scans, 60 angle, D22500 command]
[Ingest 13:05:33 INFO] Sending XML status message
[Status 13:05:33 INFO] Mirror angle: 60
[Mirror 13:05:34 INFO] rotating to position H
[Status 13:05:34 INFO] .SET file for ACQ96 ready
[Ingest 13:05:35 INFO] Starting acquisition
[Status 13:05:35 INFO] reading housekeeping
[Status 13:05:53 INFO] acquire complete
[Status 13:05:54 INFO] writing housekeeping
[Sequencer 13:05:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:05:54 INFO] incremented H scene to 238 completed views
[Sequencer 13:05:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:05:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:05:54 INFO] incremented to [AERI set: name S238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:05:54 INFO] H238.SIG(18)
[sigmove 13:05:54 DEBUG] transformed H238Ma.SPC -> H238MA.SPC
[sigmove 13:05:54 DEBUG] transformed H238Mb.SPC -> H238MB.SPC
[sigmove 13:05:54 DEBUG] transformed H238Mc.SPC -> H238MC.SPC
[sigmove 13:05:54 DEBUG] transformed H238Md.SPC -> H238MD.SPC
[sigmove 13:05:54 DEBUG] transformed H238Me.SPC -> H238ME.SPC
[sigmove 13:05:54 DEBUG] transformed H238Mf.SPC -> H238MF.SPC
[Status 13:05:54 INFO] data for H238 transferred to science data processing
[Tidy 13:05:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:05:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:05:54 INFO] resetting WatchDogTimer
[Status 13:05:54 INFO] Starting Set [AERI set: name S238, 6 scans, 0 angle, D16300 command]
[Ingest 13:05:54 INFO] Sending XML status message
[Status 13:05:54 INFO] Mirror angle: 0
[Mirror 13:05:55 INFO] rotating to position S
[Status 13:05:56 INFO] .SET file for ACQ96 ready
[Ingest 13:05:56 INFO] Starting acquisition
[Status 13:05:56 INFO] reading housekeeping
[Status 13:06:13 INFO] acquire complete
[Status 13:06:14 INFO] writing housekeeping
[Sequencer 13:06:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:06:14 INFO] incremented S scene to 238 completed views
[Sequencer 13:06:14 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:06:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:06:14 INFO] incremented to [AERI set: name T238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:06:14 INFO] S238.SIG(18)
[sigmove 13:06:14 DEBUG] transformed S238Ma.SPC -> S238MA.SPC
[sigmove 13:06:14 DEBUG] transformed S238Mb.SPC -> S238MB.SPC
[sigmove 13:06:14 DEBUG] transformed S238Mc.SPC -> S238MC.SPC
[sigmove 13:06:14 DEBUG] transformed S238Md.SPC -> S238MD.SPC
[sigmove 13:06:14 DEBUG] transformed S238Me.SPC -> S238ME.SPC
[sigmove 13:06:14 DEBUG] transformed S238Mf.SPC -> S238MF.SPC
[Status 13:06:14 INFO] data for S238 transferred to science data processing
[Tidy 13:06:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:06:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:06:14 INFO] resetting WatchDogTimer
[Status 13:06:15 INFO] Starting Set [AERI set: name T238, 6 scans, 0 angle, D16300 command]
[Ingest 13:06:15 INFO] Sending XML status message
[Status 13:06:15 INFO] Mirror angle: 0
[Mirror 13:06:15 INFO] rotating to position T
[Status 13:06:15 INFO] .SET file for ACQ96 ready
[Ingest 13:06:16 INFO] Starting acquisition
[Status 13:06:16 INFO] reading housekeeping
[Status 13:06:34 INFO] acquire complete
[Status 13:06:35 INFO] writing housekeeping
[Sequencer 13:06:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:06:35 INFO] incremented T scene to 238 completed views
[Sequencer 13:06:35 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:06:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:06:35 INFO] incremented to [AERI set: name U238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:06:35 INFO] T238.SIG(18)
[sigmove 13:06:35 DEBUG] transformed T238Ma.SPC -> T238MA.SPC
[sigmove 13:06:35 DEBUG] transformed T238Mb.SPC -> T238MB.SPC
[sigmove 13:06:35 DEBUG] transformed T238Mc.SPC -> T238MC.SPC
[sigmove 13:06:35 DEBUG] transformed T238Md.SPC -> T238MD.SPC
[sigmove 13:06:35 DEBUG] transformed T238Me.SPC -> T238ME.SPC
[sigmove 13:06:35 DEBUG] transformed T238Mf.SPC -> T238MF.SPC
[Status 13:06:35 INFO] data for T238 transferred to science data processing
[Tidy 13:06:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:06:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:06:35 INFO] resetting WatchDogTimer
[Status 13:06:35 INFO] Starting Set [AERI set: name U238, 6 scans, 0 angle, D16300 command]
[Ingest 13:06:35 INFO] Sending XML status message
[Status 13:06:35 INFO] Mirror angle: 0
[Mirror 13:06:35 INFO] rotating to position U
[Status 13:06:36 INFO] .SET file for ACQ96 ready
[Ingest 13:06:36 INFO] Starting acquisition
[Status 13:06:36 INFO] reading housekeeping
[Status 13:06:54 INFO] acquire complete
[Status 13:06:55 INFO] writing housekeeping
[Sequencer 13:06:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:06:55 INFO] incremented U scene to 238 completed views
[Sequencer 13:06:55 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:06:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:06:55 INFO] incremented to [AERI set: name V238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:06:55 INFO] U238.SIG(18)
[sigmove 13:06:55 DEBUG] transformed U238Ma.SPC -> U238MA.SPC
[sigmove 13:06:55 DEBUG] transformed U238Mb.SPC -> U238MB.SPC
[sigmove 13:06:55 DEBUG] transformed U238Mc.SPC -> U238MC.SPC
[sigmove 13:06:55 DEBUG] transformed U238Md.SPC -> U238MD.SPC
[sigmove 13:06:55 DEBUG] transformed U238Me.SPC -> U238ME.SPC
[sigmove 13:06:55 DEBUG] transformed U238Mf.SPC -> U238MF.SPC
[Status 13:06:55 INFO] data for U238 transferred to science data processing
[Tidy 13:06:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:06:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:06:55 INFO] resetting WatchDogTimer
[Status 13:06:55 INFO] Starting Set [AERI set: name V238, 6 scans, 0 angle, D16300 command]
[Ingest 13:06:55 INFO] Sending XML status message
[Status 13:06:55 INFO] Mirror angle: 0
[Mirror 13:06:55 INFO] rotating to position V
[Status 13:06:56 INFO] .SET file for ACQ96 ready
[Ingest 13:06:56 INFO] Starting acquisition
[Status 13:06:56 INFO] reading housekeeping
[Status 13:07:14 INFO] acquire complete
[Status 13:07:15 INFO] writing housekeeping
[Sequencer 13:07:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:07:15 INFO] incremented V scene to 238 completed views
[Sequencer 13:07:15 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:07:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:07:15 INFO] incremented to [AERI set: name W238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:07:15 INFO] V238.SIG(18)
[sigmove 13:07:15 DEBUG] transformed V238Ma.SPC -> V238MA.SPC
[sigmove 13:07:15 DEBUG] transformed V238Mb.SPC -> V238MB.SPC
[sigmove 13:07:15 DEBUG] transformed V238Mc.SPC -> V238MC.SPC
[sigmove 13:07:15 DEBUG] transformed V238Md.SPC -> V238MD.SPC
[sigmove 13:07:15 DEBUG] transformed V238Me.SPC -> V238ME.SPC
[sigmove 13:07:15 DEBUG] transformed V238Mf.SPC -> V238MF.SPC
[Status 13:07:15 INFO] data for V238 transferred to science data processing
[Tidy 13:07:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:07:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:07:15 INFO] resetting WatchDogTimer
[Status 13:07:15 INFO] Starting Set [AERI set: name W238, 6 scans, 0 angle, D16300 command]
[Ingest 13:07:15 INFO] Sending XML status message
[Status 13:07:15 INFO] Mirror angle: 0
[Mirror 13:07:16 INFO] rotating to position W
[Status 13:07:16 INFO] .SET file for ACQ96 ready
[Ingest 13:07:16 INFO] Starting acquisition
[Status 13:07:17 INFO] reading housekeeping
[Status 13:07:34 INFO] acquire complete
[Status 13:07:35 INFO] writing housekeeping
[Sequencer 13:07:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:07:35 INFO] incremented W scene to 238 completed views
[Sequencer 13:07:35 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:07:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:07:35 INFO] incremented to [AERI set: name X238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:07:35 INFO] W238.SIG(18)
[sigmove 13:07:35 DEBUG] transformed W238Ma.SPC -> W238MA.SPC
[sigmove 13:07:35 DEBUG] transformed W238Mb.SPC -> W238MB.SPC
[sigmove 13:07:35 DEBUG] transformed W238Mc.SPC -> W238MC.SPC
[sigmove 13:07:35 DEBUG] transformed W238Md.SPC -> W238MD.SPC
[sigmove 13:07:35 DEBUG] transformed W238Me.SPC -> W238ME.SPC
[sigmove 13:07:35 DEBUG] transformed W238Mf.SPC -> W238MF.SPC
[Status 13:07:35 INFO] data for W238 transferred to science data processing
[Tidy 13:07:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:07:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:07:35 INFO] resetting WatchDogTimer
[Status 13:07:35 INFO] Starting Set [AERI set: name X238, 6 scans, 0 angle, D16300 command]
[Ingest 13:07:35 INFO] Sending XML status message
[Status 13:07:35 INFO] Mirror angle: 0
[Mirror 13:07:36 INFO] rotating to position X
[Status 13:07:36 INFO] .SET file for ACQ96 ready
[Ingest 13:07:36 INFO] Starting acquisition
[Status 13:07:37 INFO] reading housekeeping
[Status 13:07:54 INFO] acquire complete
[Status 13:07:55 INFO] writing housekeeping
[Sequencer 13:07:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:07:55 INFO] incremented X scene to 238 completed views
[Sequencer 13:07:55 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:07:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:07:55 INFO] incremented to [AERI set: name Y238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:07:55 INFO] X238.SIG(18)
[sigmove 13:07:55 DEBUG] transformed X238Ma.SPC -> X238MA.SPC
[sigmove 13:07:55 DEBUG] transformed X238Mb.SPC -> X238MB.SPC
[sigmove 13:07:55 DEBUG] transformed X238Mc.SPC -> X238MC.SPC
[sigmove 13:07:55 DEBUG] transformed X238Md.SPC -> X238MD.SPC
[sigmove 13:07:55 DEBUG] transformed X238Me.SPC -> X238ME.SPC
[sigmove 13:07:55 DEBUG] transformed X238Mf.SPC -> X238MF.SPC
[Status 13:07:55 INFO] data for X238 transferred to science data processing
[Tidy 13:07:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:07:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:07:55 INFO] resetting WatchDogTimer
[Status 13:07:56 INFO] Starting Set [AERI set: name Y238, 6 scans, 0 angle, D16300 command]
[Ingest 13:07:56 INFO] Sending XML status message
[Status 13:07:56 INFO] Mirror angle: 0
[Mirror 13:07:56 INFO] rotating to position Y
[Status 13:07:56 INFO] .SET file for ACQ96 ready
[Ingest 13:07:57 INFO] Starting acquisition
[Status 13:07:57 INFO] reading housekeeping
[Status 13:08:15 INFO] acquire complete
[Status 13:08:15 INFO] writing housekeeping
[Sequencer 13:08:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:08:15 INFO] incremented Y scene to 238 completed views
[Sequencer 13:08:15 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:08:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:08:16 INFO] incremented to [AERI set: name Z238, 6 scans, 0 angle, D16300 command] set
[sigmove 13:08:16 INFO] Y238.SIG(18)
[sigmove 13:08:16 DEBUG] transformed Y238Ma.SPC -> Y238MA.SPC
[sigmove 13:08:16 DEBUG] transformed Y238Mb.SPC -> Y238MB.SPC
[sigmove 13:08:16 DEBUG] transformed Y238Mc.SPC -> Y238MC.SPC
[sigmove 13:08:16 DEBUG] transformed Y238Md.SPC -> Y238MD.SPC
[sigmove 13:08:16 DEBUG] transformed Y238Me.SPC -> Y238ME.SPC
[sigmove 13:08:16 DEBUG] transformed Y238Mf.SPC -> Y238MF.SPC
[Status 13:08:16 INFO] data for Y238 transferred to science data processing
[Tidy 13:08:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:08:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:08:16 INFO] resetting WatchDogTimer
[Status 13:08:16 INFO] Starting Set [AERI set: name Z238, 6 scans, 0 angle, D16300 command]
[Ingest 13:08:16 INFO] Sending XML status message
[Status 13:08:16 INFO] Mirror angle: 0
[Mirror 13:08:16 INFO] rotating to position Z
[Status 13:08:17 INFO] .SET file for ACQ96 ready
[Ingest 13:08:17 INFO] Starting acquisition
[Status 13:08:17 INFO] reading housekeeping
[Status 13:08:35 INFO] acquire complete
[Status 13:08:36 INFO] writing housekeeping
[Sequencer 13:08:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:08:36 INFO] incremented Z scene to 238 completed views
[Sequencer 13:08:36 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:08:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:08:36 INFO] incremented to [AERI set: name H239, 6 scans, 60 angle, D22500 command] set
[sigmove 13:08:36 INFO] Z238.SIG(18)
[sigmove 13:08:36 DEBUG] transformed Z238Ma.SPC -> Z238MA.SPC
[sigmove 13:08:36 DEBUG] transformed Z238Mb.SPC -> Z238MB.SPC
[sigmove 13:08:36 DEBUG] transformed Z238Mc.SPC -> Z238MC.SPC
[sigmove 13:08:36 DEBUG] transformed Z238Md.SPC -> Z238MD.SPC
[sigmove 13:08:36 DEBUG] transformed Z238Me.SPC -> Z238ME.SPC
[sigmove 13:08:36 DEBUG] transformed Z238Mf.SPC -> Z238MF.SPC
[Status 13:08:36 INFO] data for Z238 transferred to science data processing
[Tidy 13:08:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:08:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:08:36 INFO] resetting WatchDogTimer
[Status 13:08:36 INFO] Starting Set [AERI set: name H239, 6 scans, 60 angle, D22500 command]
[Ingest 13:08:36 INFO] Sending XML status message
[Status 13:08:36 INFO] Mirror angle: 60
[Mirror 13:08:36 INFO] rotating to position H
[Status 13:08:37 INFO] .SET file for ACQ96 ready
[Ingest 13:08:38 INFO] Starting acquisition
[Status 13:08:38 INFO] reading housekeeping
[Status 13:08:56 INFO] acquire complete
[Status 13:08:57 INFO] writing housekeeping
[Sequencer 13:08:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:08:57 INFO] incremented H scene to 239 completed views
[Sequencer 13:08:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:08:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:08:57 INFO] incremented to [AERI set: name A239, 6 scans, 120 angle, D28300 command] set
[sigmove 13:08:57 INFO] H239.SIG(18)
[sigmove 13:08:57 DEBUG] transformed H239Ma.SPC -> H239MA.SPC
[sigmove 13:08:57 DEBUG] transformed H239Mb.SPC -> H239MB.SPC
[sigmove 13:08:57 DEBUG] transformed H239Mc.SPC -> H239MC.SPC
[sigmove 13:08:57 DEBUG] transformed H239Md.SPC -> H239MD.SPC
[sigmove 13:08:57 DEBUG] transformed H239Me.SPC -> H239ME.SPC
[sigmove 13:08:57 DEBUG] transformed H239Mf.SPC -> H239MF.SPC
[Status 13:08:57 INFO] data for H239 transferred to science data processing
[Tidy 13:08:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:08:57 INFO] A237.FIN(19),H237.FIN(19),S237.FIN(19),T237.FIN(19),U237.FIN(19),V237.FIN(19),W237.FIN(19),X237.FIN(19),Y237.FIN(19),Z237.FIN(19),A238.FIN(19),H238.FIN(19),S238.FIN(19),T238.FIN(19),U238.FIN(19),V238.FIN(19),W238.FIN(19),X238.FIN(19),Y238.FIN(19),Z238.FIN(19)
[sigmove 13:08:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:08:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:09:01 DEBUG] done zipping
[WatchDog 13:09:02 INFO] resetting WatchDogTimer
[Status 13:09:02 INFO] Starting Set [AERI set: name A239, 6 scans, 120 angle, D28300 command]
[Ingest 13:09:02 INFO] Sending XML status message
[Status 13:09:02 INFO] Mirror angle: 120
[Mirror 13:09:02 INFO] rotating to position A
[Status 13:09:03 INFO] .SET file for ACQ96 ready
[Ingest 13:09:04 INFO] Starting acquisition
[Status 13:09:04 INFO] reading housekeeping
[Status 13:09:22 INFO] acquire complete
[Status 13:09:23 INFO] writing housekeeping
[Sequencer 13:09:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:09:23 INFO] incremented A scene to 239 completed views
[Sequencer 13:09:23 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:09:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:09:23 INFO] incremented to [AERI set: name S239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:09:23 INFO] A239.SIG(18)
[sigmove 13:09:23 DEBUG] transformed A239Ma.SPC -> A239MA.SPC
[sigmove 13:09:23 DEBUG] transformed A239Mb.SPC -> A239MB.SPC
[sigmove 13:09:23 DEBUG] transformed A239Mc.SPC -> A239MC.SPC
[sigmove 13:09:23 DEBUG] transformed A239Md.SPC -> A239MD.SPC
[sigmove 13:09:23 DEBUG] transformed A239Me.SPC -> A239ME.SPC
[sigmove 13:09:23 DEBUG] transformed A239Mf.SPC -> A239MF.SPC
[Status 13:09:23 INFO] data for A239 transferred to science data processing
[Tidy 13:09:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:09:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:09:23 INFO] resetting WatchDogTimer
[Status 13:09:23 INFO] Starting Set [AERI set: name S239, 6 scans, 0 angle, D16300 command]
[Ingest 13:09:23 INFO] Sending XML status message
[Status 13:09:23 INFO] Mirror angle: 0
[Mirror 13:09:24 INFO] rotating to position S
[Status 13:09:25 INFO] .SET file for ACQ96 ready
[Ingest 13:09:25 INFO] Starting acquisition
[Status 13:09:26 INFO] reading housekeeping
[Status 13:09:43 INFO] acquire complete
[Status 13:09:44 INFO] writing housekeeping
[Sequencer 13:09:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:09:44 INFO] incremented S scene to 239 completed views
[Sequencer 13:09:44 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:09:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:09:44 INFO] incremented to [AERI set: name T239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:09:44 INFO] S239.SIG(18)
[sigmove 13:09:44 DEBUG] transformed S239Ma.SPC -> S239MA.SPC
[sigmove 13:09:44 DEBUG] transformed S239Mb.SPC -> S239MB.SPC
[sigmove 13:09:44 DEBUG] transformed S239Mc.SPC -> S239MC.SPC
[sigmove 13:09:44 DEBUG] transformed S239Md.SPC -> S239MD.SPC
[sigmove 13:09:44 DEBUG] transformed S239Me.SPC -> S239ME.SPC
[sigmove 13:09:44 DEBUG] transformed S239Mf.SPC -> S239MF.SPC
[Status 13:09:44 INFO] data for S239 transferred to science data processing
[Tidy 13:09:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:09:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:09:44 INFO] resetting WatchDogTimer
[Status 13:09:45 INFO] Starting Set [AERI set: name T239, 6 scans, 0 angle, D16300 command]
[Ingest 13:09:45 INFO] Sending XML status message
[Status 13:09:45 INFO] Mirror angle: 0
[Mirror 13:09:45 INFO] rotating to position T
[Status 13:09:45 INFO] .SET file for ACQ96 ready
[Ingest 13:09:46 INFO] Starting acquisition
[Status 13:09:46 INFO] reading housekeeping
[Status 13:10:03 INFO] acquire complete
[Status 13:10:04 INFO] writing housekeeping
[Sequencer 13:10:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:10:04 INFO] incremented T scene to 239 completed views
[Sequencer 13:10:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:10:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:10:04 INFO] incremented to [AERI set: name U239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:10:04 INFO] T239.SIG(18)
[sigmove 13:10:04 DEBUG] transformed T239Ma.SPC -> T239MA.SPC
[sigmove 13:10:04 DEBUG] transformed T239Mb.SPC -> T239MB.SPC
[sigmove 13:10:04 DEBUG] transformed T239Mc.SPC -> T239MC.SPC
[sigmove 13:10:04 DEBUG] transformed T239Md.SPC -> T239MD.SPC
[sigmove 13:10:04 DEBUG] transformed T239Me.SPC -> T239ME.SPC
[sigmove 13:10:04 DEBUG] transformed T239Mf.SPC -> T239MF.SPC
[Status 13:10:04 INFO] data for T239 transferred to science data processing
[Tidy 13:10:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:10:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:10:04 INFO] resetting WatchDogTimer
[Status 13:10:05 INFO] Starting Set [AERI set: name U239, 6 scans, 0 angle, D16300 command]
[Ingest 13:10:05 INFO] Sending XML status message
[Status 13:10:05 INFO] Mirror angle: 0
[Mirror 13:10:05 INFO] rotating to position U
[Status 13:10:05 INFO] .SET file for ACQ96 ready
[Ingest 13:10:06 INFO] Starting acquisition
[Status 13:10:06 INFO] reading housekeeping
[Status 13:10:24 INFO] acquire complete
[Status 13:10:25 INFO] writing housekeeping
[Sequencer 13:10:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:10:25 INFO] incremented U scene to 239 completed views
[Sequencer 13:10:25 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:10:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:10:25 INFO] incremented to [AERI set: name V239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:10:25 INFO] U239.SIG(18)
[sigmove 13:10:25 DEBUG] transformed U239Ma.SPC -> U239MA.SPC
[sigmove 13:10:25 DEBUG] transformed U239Mb.SPC -> U239MB.SPC
[sigmove 13:10:25 DEBUG] transformed U239Mc.SPC -> U239MC.SPC
[sigmove 13:10:25 DEBUG] transformed U239Md.SPC -> U239MD.SPC
[sigmove 13:10:25 DEBUG] transformed U239Me.SPC -> U239ME.SPC
[sigmove 13:10:25 DEBUG] transformed U239Mf.SPC -> U239MF.SPC
[Status 13:10:25 INFO] data for U239 transferred to science data processing
[Tidy 13:10:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:10:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:10:25 INFO] resetting WatchDogTimer
[Status 13:10:25 INFO] Starting Set [AERI set: name V239, 6 scans, 0 angle, D16300 command]
[Ingest 13:10:25 INFO] Sending XML status message
[Status 13:10:25 INFO] Mirror angle: 0
[Mirror 13:10:25 INFO] rotating to position V
[Status 13:10:26 INFO] .SET file for ACQ96 ready
[Ingest 13:10:26 INFO] Starting acquisition
[Status 13:10:26 INFO] reading housekeeping
[Status 13:10:44 INFO] acquire complete
[Status 13:10:45 INFO] writing housekeeping
[Sequencer 13:10:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:10:45 INFO] incremented V scene to 239 completed views
[Sequencer 13:10:45 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:10:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:10:45 INFO] incremented to [AERI set: name W239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:10:45 INFO] V239.SIG(18)
[sigmove 13:10:45 DEBUG] transformed V239Ma.SPC -> V239MA.SPC
[sigmove 13:10:45 DEBUG] transformed V239Mb.SPC -> V239MB.SPC
[sigmove 13:10:45 DEBUG] transformed V239Mc.SPC -> V239MC.SPC
[sigmove 13:10:45 DEBUG] transformed V239Md.SPC -> V239MD.SPC
[sigmove 13:10:45 DEBUG] transformed V239Me.SPC -> V239ME.SPC
[sigmove 13:10:45 DEBUG] transformed V239Mf.SPC -> V239MF.SPC
[Status 13:10:45 INFO] data for V239 transferred to science data processing
[Tidy 13:10:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:10:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:10:45 INFO] resetting WatchDogTimer
[Status 13:10:45 INFO] Starting Set [AERI set: name W239, 6 scans, 0 angle, D16300 command]
[Ingest 13:10:45 INFO] Sending XML status message
[Status 13:10:45 INFO] Mirror angle: 0
[Mirror 13:10:45 INFO] rotating to position W
[Status 13:10:46 INFO] .SET file for ACQ96 ready
[Ingest 13:10:46 INFO] Starting acquisition
[Status 13:10:46 INFO] reading housekeeping
[Status 13:11:04 INFO] acquire complete
[Status 13:11:05 INFO] writing housekeeping
[Sequencer 13:11:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:11:05 INFO] incremented W scene to 239 completed views
[Sequencer 13:11:05 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:11:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:11:05 INFO] incremented to [AERI set: name X239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:11:05 INFO] W239.SIG(18)
[sigmove 13:11:05 DEBUG] transformed W239Ma.SPC -> W239MA.SPC
[sigmove 13:11:05 DEBUG] transformed W239Mb.SPC -> W239MB.SPC
[sigmove 13:11:05 DEBUG] transformed W239Mc.SPC -> W239MC.SPC
[sigmove 13:11:05 DEBUG] transformed W239Md.SPC -> W239MD.SPC
[sigmove 13:11:05 DEBUG] transformed W239Me.SPC -> W239ME.SPC
[sigmove 13:11:05 DEBUG] transformed W239Mf.SPC -> W239MF.SPC
[Status 13:11:05 INFO] data for W239 transferred to science data processing
[Tidy 13:11:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:11:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:11:05 INFO] resetting WatchDogTimer
[Status 13:11:05 INFO] Starting Set [AERI set: name X239, 6 scans, 0 angle, D16300 command]
[Ingest 13:11:05 INFO] Sending XML status message
[Status 13:11:05 INFO] Mirror angle: 0
[Mirror 13:11:06 INFO] rotating to position X
[Status 13:11:06 INFO] .SET file for ACQ96 ready
[Ingest 13:11:06 INFO] Starting acquisition
[Status 13:11:07 INFO] reading housekeeping
[Status 13:11:24 INFO] acquire complete
[Status 13:11:25 INFO] writing housekeeping
[Sequencer 13:11:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:11:25 INFO] incremented X scene to 239 completed views
[Sequencer 13:11:25 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:11:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:11:25 INFO] incremented to [AERI set: name Y239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:11:25 INFO] X239.SIG(18)
[sigmove 13:11:25 DEBUG] transformed X239Ma.SPC -> X239MA.SPC
[sigmove 13:11:25 DEBUG] transformed X239Mb.SPC -> X239MB.SPC
[sigmove 13:11:25 DEBUG] transformed X239Mc.SPC -> X239MC.SPC
[sigmove 13:11:25 DEBUG] transformed X239Md.SPC -> X239MD.SPC
[sigmove 13:11:25 DEBUG] transformed X239Me.SPC -> X239ME.SPC
[sigmove 13:11:25 DEBUG] transformed X239Mf.SPC -> X239MF.SPC
[Status 13:11:25 INFO] data for X239 transferred to science data processing
[Tidy 13:11:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:11:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:11:25 INFO] resetting WatchDogTimer
[Status 13:11:25 INFO] Starting Set [AERI set: name Y239, 6 scans, 0 angle, D16300 command]
[Ingest 13:11:25 INFO] Sending XML status message
[Status 13:11:25 INFO] Mirror angle: 0
[Mirror 13:11:26 INFO] rotating to position Y
[Status 13:11:26 INFO] .SET file for ACQ96 ready
[Ingest 13:11:26 INFO] Starting acquisition
[Status 13:11:27 INFO] reading housekeeping
[Status 13:11:44 INFO] acquire complete
[Status 13:11:45 INFO] writing housekeeping
[Sequencer 13:11:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:11:45 INFO] incremented Y scene to 239 completed views
[Sequencer 13:11:45 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:11:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:11:45 INFO] incremented to [AERI set: name Z239, 6 scans, 0 angle, D16300 command] set
[sigmove 13:11:45 INFO] Y239.SIG(18)
[sigmove 13:11:45 DEBUG] transformed Y239Ma.SPC -> Y239MA.SPC
[sigmove 13:11:45 DEBUG] transformed Y239Mb.SPC -> Y239MB.SPC
[sigmove 13:11:45 DEBUG] transformed Y239Mc.SPC -> Y239MC.SPC
[sigmove 13:11:45 DEBUG] transformed Y239Md.SPC -> Y239MD.SPC
[sigmove 13:11:45 DEBUG] transformed Y239Me.SPC -> Y239ME.SPC
[sigmove 13:11:45 DEBUG] transformed Y239Mf.SPC -> Y239MF.SPC
[Status 13:11:45 INFO] data for Y239 transferred to science data processing
[Tidy 13:11:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:11:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:11:45 INFO] resetting WatchDogTimer
[Status 13:11:46 INFO] Starting Set [AERI set: name Z239, 6 scans, 0 angle, D16300 command]
[Ingest 13:11:46 INFO] Sending XML status message
[Status 13:11:46 INFO] Mirror angle: 0
[Mirror 13:11:46 INFO] rotating to position Z
[Status 13:11:46 INFO] .SET file for ACQ96 ready
[Ingest 13:11:47 INFO] Starting acquisition
[Status 13:11:47 INFO] reading housekeeping
[Status 13:12:05 INFO] acquire complete
[Status 13:12:06 INFO] writing housekeeping
[Sequencer 13:12:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:12:06 INFO] incremented Z scene to 239 completed views
[Sequencer 13:12:06 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:12:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:12:06 INFO] incremented to [AERI set: name A240, 6 scans, 120 angle, D28300 command] set
[sigmove 13:12:06 INFO] Z239.SIG(18)
[sigmove 13:12:06 DEBUG] transformed Z239Ma.SPC -> Z239MA.SPC
[sigmove 13:12:06 DEBUG] transformed Z239Mb.SPC -> Z239MB.SPC
[sigmove 13:12:06 DEBUG] transformed Z239Mc.SPC -> Z239MC.SPC
[sigmove 13:12:06 DEBUG] transformed Z239Md.SPC -> Z239MD.SPC
[sigmove 13:12:06 DEBUG] transformed Z239Me.SPC -> Z239ME.SPC
[sigmove 13:12:06 DEBUG] transformed Z239Mf.SPC -> Z239MF.SPC
[Status 13:12:06 INFO] data for Z239 transferred to science data processing
[Tidy 13:12:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:12:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:12:06 INFO] resetting WatchDogTimer
[Status 13:12:06 INFO] Starting Set [AERI set: name A240, 6 scans, 120 angle, D28300 command]
[Ingest 13:12:06 INFO] Sending XML status message
[Status 13:12:06 INFO] Mirror angle: 120
[Mirror 13:12:06 INFO] rotating to position A
[Status 13:12:08 INFO] .SET file for ACQ96 ready
[Ingest 13:12:08 INFO] Starting acquisition
[Status 13:12:08 INFO] reading housekeeping
[Status 13:12:26 INFO] acquire complete
[Status 13:12:27 INFO] writing housekeeping
[Sequencer 13:12:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:12:27 INFO] incremented A scene to 240 completed views
[Sequencer 13:12:27 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:12:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:12:27 INFO] incremented to [AERI set: name H240, 6 scans, 60 angle, D22500 command] set
[sigmove 13:12:27 INFO] A240.SIG(18)
[sigmove 13:12:27 DEBUG] transformed A240Ma.SPC -> A240MA.SPC
[sigmove 13:12:27 DEBUG] transformed A240Mb.SPC -> A240MB.SPC
[sigmove 13:12:27 DEBUG] transformed A240Mc.SPC -> A240MC.SPC
[sigmove 13:12:27 DEBUG] transformed A240Md.SPC -> A240MD.SPC
[sigmove 13:12:27 DEBUG] transformed A240Me.SPC -> A240ME.SPC
[sigmove 13:12:27 DEBUG] transformed A240Mf.SPC -> A240MF.SPC
[Status 13:12:27 INFO] data for A240 transferred to science data processing
[Tidy 13:12:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:12:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:12:27 INFO] resetting WatchDogTimer
[Status 13:12:27 INFO] Starting Set [AERI set: name H240, 6 scans, 60 angle, D22500 command]
[Ingest 13:12:27 INFO] Sending XML status message
[Status 13:12:27 INFO] Mirror angle: 60
[Mirror 13:12:27 INFO] rotating to position H
[Status 13:12:28 INFO] .SET file for ACQ96 ready
[Ingest 13:12:29 INFO] Starting acquisition
[Status 13:12:29 INFO] reading housekeeping
[Status 13:12:47 INFO] acquire complete
[Status 13:12:48 INFO] writing housekeeping
[Sequencer 13:12:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:12:48 INFO] incremented H scene to 240 completed views
[Sequencer 13:12:48 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:12:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:12:48 INFO] incremented to [AERI set: name S240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:12:48 INFO] H240.SIG(18)
[sigmove 13:12:48 DEBUG] transformed H240Ma.SPC -> H240MA.SPC
[sigmove 13:12:48 DEBUG] transformed H240Mb.SPC -> H240MB.SPC
[sigmove 13:12:48 DEBUG] transformed H240Mc.SPC -> H240MC.SPC
[sigmove 13:12:48 DEBUG] transformed H240Md.SPC -> H240MD.SPC
[sigmove 13:12:48 DEBUG] transformed H240Me.SPC -> H240ME.SPC
[sigmove 13:12:48 DEBUG] transformed H240Mf.SPC -> H240MF.SPC
[Status 13:12:48 INFO] data for H240 transferred to science data processing
[Tidy 13:12:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:12:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:12:48 INFO] resetting WatchDogTimer
[Status 13:12:48 INFO] Starting Set [AERI set: name S240, 6 scans, 0 angle, D16300 command]
[Ingest 13:12:48 INFO] Sending XML status message
[Status 13:12:49 INFO] Mirror angle: 0
[Mirror 13:12:49 INFO] rotating to position S
[Status 13:12:50 INFO] .SET file for ACQ96 ready
[Ingest 13:12:50 INFO] Starting acquisition
[Status 13:12:50 INFO] reading housekeeping
[Status 13:13:09 INFO] acquire complete
[Status 13:13:09 INFO] writing housekeeping
[Sequencer 13:13:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:13:09 INFO] incremented S scene to 240 completed views
[Sequencer 13:13:09 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:13:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:13:09 INFO] incremented to [AERI set: name T240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:13:09 INFO] S240.SIG(18)
[sigmove 13:13:09 DEBUG] transformed S240Ma.SPC -> S240MA.SPC
[sigmove 13:13:09 DEBUG] transformed S240Mb.SPC -> S240MB.SPC
[sigmove 13:13:09 DEBUG] transformed S240Mc.SPC -> S240MC.SPC
[sigmove 13:13:09 DEBUG] transformed S240Md.SPC -> S240MD.SPC
[sigmove 13:13:09 DEBUG] transformed S240Me.SPC -> S240ME.SPC
[sigmove 13:13:09 DEBUG] transformed S240Mf.SPC -> S240MF.SPC
[Status 13:13:09 INFO] data for S240 transferred to science data processing
[Tidy 13:13:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:13:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:13:10 INFO] resetting WatchDogTimer
[Status 13:13:10 INFO] Starting Set [AERI set: name T240, 6 scans, 0 angle, D16300 command]
[Ingest 13:13:10 INFO] Sending XML status message
[Status 13:13:10 INFO] Mirror angle: 0
[Mirror 13:13:10 INFO] rotating to position T
[Status 13:13:11 INFO] .SET file for ACQ96 ready
[Ingest 13:13:11 INFO] Starting acquisition
[Status 13:13:11 INFO] reading housekeeping
[Status 13:13:29 INFO] acquire complete
[Status 13:13:30 INFO] writing housekeeping
[Sequencer 13:13:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:13:30 INFO] incremented T scene to 240 completed views
[Sequencer 13:13:30 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:13:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:13:30 INFO] incremented to [AERI set: name U240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:13:30 INFO] T240.SIG(18)
[sigmove 13:13:30 DEBUG] transformed T240Ma.SPC -> T240MA.SPC
[sigmove 13:13:30 DEBUG] transformed T240Mb.SPC -> T240MB.SPC
[sigmove 13:13:30 DEBUG] transformed T240Mc.SPC -> T240MC.SPC
[sigmove 13:13:30 DEBUG] transformed T240Md.SPC -> T240MD.SPC
[sigmove 13:13:30 DEBUG] transformed T240Me.SPC -> T240ME.SPC
[sigmove 13:13:30 DEBUG] transformed T240Mf.SPC -> T240MF.SPC
[Status 13:13:30 INFO] data for T240 transferred to science data processing
[Tidy 13:13:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:13:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:13:30 INFO] resetting WatchDogTimer
[Status 13:13:30 INFO] Starting Set [AERI set: name U240, 6 scans, 0 angle, D16300 command]
[Ingest 13:13:30 INFO] Sending XML status message
[Status 13:13:30 INFO] Mirror angle: 0
[Mirror 13:13:30 INFO] rotating to position U
[Status 13:13:31 INFO] .SET file for ACQ96 ready
[Ingest 13:13:31 INFO] Starting acquisition
[Status 13:13:31 INFO] reading housekeeping
[Status 13:13:49 INFO] acquire complete
[Status 13:13:50 INFO] writing housekeeping
[Sequencer 13:13:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:13:50 INFO] incremented U scene to 240 completed views
[Sequencer 13:13:50 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:13:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:13:50 INFO] incremented to [AERI set: name V240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:13:50 INFO] U240.SIG(18)
[sigmove 13:13:50 DEBUG] transformed U240Ma.SPC -> U240MA.SPC
[sigmove 13:13:50 DEBUG] transformed U240Mb.SPC -> U240MB.SPC
[sigmove 13:13:50 DEBUG] transformed U240Mc.SPC -> U240MC.SPC
[sigmove 13:13:50 DEBUG] transformed U240Md.SPC -> U240MD.SPC
[sigmove 13:13:50 DEBUG] transformed U240Me.SPC -> U240ME.SPC
[sigmove 13:13:50 DEBUG] transformed U240Mf.SPC -> U240MF.SPC
[Status 13:13:50 INFO] data for U240 transferred to science data processing
[Tidy 13:13:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:13:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:13:50 INFO] resetting WatchDogTimer
[Status 13:13:50 INFO] Starting Set [AERI set: name V240, 6 scans, 0 angle, D16300 command]
[Ingest 13:13:50 INFO] Sending XML status message
[Status 13:13:50 INFO] Mirror angle: 0
[Mirror 13:13:51 INFO] rotating to position V
[Status 13:13:51 INFO] .SET file for ACQ96 ready
[Ingest 13:13:51 INFO] Starting acquisition
[Status 13:13:52 INFO] reading housekeeping
[Status 13:14:09 INFO] acquire complete
[Status 13:14:10 INFO] writing housekeeping
[Sequencer 13:14:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:14:10 INFO] incremented V scene to 240 completed views
[Sequencer 13:14:10 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:14:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:14:10 INFO] incremented to [AERI set: name W240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:14:10 INFO] V240.SIG(18)
[sigmove 13:14:10 DEBUG] transformed V240Ma.SPC -> V240MA.SPC
[sigmove 13:14:10 DEBUG] transformed V240Mb.SPC -> V240MB.SPC
[sigmove 13:14:10 DEBUG] transformed V240Mc.SPC -> V240MC.SPC
[sigmove 13:14:10 DEBUG] transformed V240Md.SPC -> V240MD.SPC
[sigmove 13:14:10 DEBUG] transformed V240Me.SPC -> V240ME.SPC
[sigmove 13:14:10 DEBUG] transformed V240Mf.SPC -> V240MF.SPC
[Status 13:14:10 INFO] data for V240 transferred to science data processing
[Tidy 13:14:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:14:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:14:10 INFO] resetting WatchDogTimer
[Status 13:14:10 INFO] Starting Set [AERI set: name W240, 6 scans, 0 angle, D16300 command]
[Ingest 13:14:10 INFO] Sending XML status message
[Status 13:14:10 INFO] Mirror angle: 0
[Mirror 13:14:11 INFO] rotating to position W
[Status 13:14:11 INFO] .SET file for ACQ96 ready
[Ingest 13:14:11 INFO] Starting acquisition
[Status 13:14:12 INFO] reading housekeeping
[Status 13:14:29 INFO] acquire complete
[Status 13:14:30 INFO] writing housekeeping
[Sequencer 13:14:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:14:30 INFO] incremented W scene to 240 completed views
[Sequencer 13:14:30 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:14:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:14:30 INFO] incremented to [AERI set: name X240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:14:30 INFO] W240.SIG(18)
[sigmove 13:14:30 DEBUG] transformed W240Ma.SPC -> W240MA.SPC
[sigmove 13:14:30 DEBUG] transformed W240Mb.SPC -> W240MB.SPC
[sigmove 13:14:30 DEBUG] transformed W240Mc.SPC -> W240MC.SPC
[sigmove 13:14:30 DEBUG] transformed W240Md.SPC -> W240MD.SPC
[sigmove 13:14:30 DEBUG] transformed W240Me.SPC -> W240ME.SPC
[sigmove 13:14:30 DEBUG] transformed W240Mf.SPC -> W240MF.SPC
[Status 13:14:30 INFO] data for W240 transferred to science data processing
[Tidy 13:14:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:14:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:14:30 INFO] resetting WatchDogTimer
[Status 13:14:31 INFO] Starting Set [AERI set: name X240, 6 scans, 0 angle, D16300 command]
[Ingest 13:14:31 INFO] Sending XML status message
[Status 13:14:31 INFO] Mirror angle: 0
[Mirror 13:14:31 INFO] rotating to position X
[Status 13:14:31 INFO] .SET file for ACQ96 ready
[Ingest 13:14:32 INFO] Starting acquisition
[Status 13:14:32 INFO] reading housekeeping
[Status 13:14:50 INFO] acquire complete
[Status 13:14:50 INFO] writing housekeeping
[Sequencer 13:14:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:14:50 INFO] incremented X scene to 240 completed views
[Sequencer 13:14:50 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:14:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:14:50 INFO] incremented to [AERI set: name Y240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:14:50 INFO] X240.SIG(18)
[sigmove 13:14:50 DEBUG] transformed X240Ma.SPC -> X240MA.SPC
[sigmove 13:14:50 DEBUG] transformed X240Mb.SPC -> X240MB.SPC
[sigmove 13:14:50 DEBUG] transformed X240Mc.SPC -> X240MC.SPC
[sigmove 13:14:50 DEBUG] transformed X240Md.SPC -> X240MD.SPC
[sigmove 13:14:50 DEBUG] transformed X240Me.SPC -> X240ME.SPC
[sigmove 13:14:50 DEBUG] transformed X240Mf.SPC -> X240MF.SPC
[Status 13:14:50 INFO] data for X240 transferred to science data processing
[Tidy 13:14:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:14:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:14:50 INFO] resetting WatchDogTimer
[Status 13:14:51 INFO] Starting Set [AERI set: name Y240, 6 scans, 0 angle, D16300 command]
[Ingest 13:14:51 INFO] Sending XML status message
[Status 13:14:51 INFO] Mirror angle: 0
[Mirror 13:14:51 INFO] rotating to position Y
[Status 13:14:52 INFO] .SET file for ACQ96 ready
[Ingest 13:14:52 INFO] Starting acquisition
[Status 13:14:52 INFO] reading housekeeping
[Status 13:15:10 INFO] acquire complete
[Status 13:15:11 INFO] writing housekeeping
[Sequencer 13:15:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:15:11 INFO] incremented Y scene to 240 completed views
[Sequencer 13:15:11 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:15:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:15:11 INFO] incremented to [AERI set: name Z240, 6 scans, 0 angle, D16300 command] set
[sigmove 13:15:11 INFO] Y240.SIG(18)
[sigmove 13:15:11 DEBUG] transformed Y240Ma.SPC -> Y240MA.SPC
[sigmove 13:15:11 DEBUG] transformed Y240Mb.SPC -> Y240MB.SPC
[sigmove 13:15:11 DEBUG] transformed Y240Mc.SPC -> Y240MC.SPC
[sigmove 13:15:11 DEBUG] transformed Y240Md.SPC -> Y240MD.SPC
[sigmove 13:15:11 DEBUG] transformed Y240Me.SPC -> Y240ME.SPC
[sigmove 13:15:11 DEBUG] transformed Y240Mf.SPC -> Y240MF.SPC
[Status 13:15:11 INFO] data for Y240 transferred to science data processing
[Tidy 13:15:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:15:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:15:11 INFO] resetting WatchDogTimer
[Status 13:15:11 INFO] Starting Set [AERI set: name Z240, 6 scans, 0 angle, D16300 command]
[Ingest 13:15:11 INFO] Sending XML status message
[Status 13:15:11 INFO] Mirror angle: 0
[Mirror 13:15:11 INFO] rotating to position Z
[Status 13:15:12 INFO] .SET file for ACQ96 ready
[Ingest 13:15:12 INFO] Starting acquisition
[Status 13:15:12 INFO] reading housekeeping
[Status 13:15:30 INFO] acquire complete
[Status 13:15:31 INFO] writing housekeeping
[Sequencer 13:15:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:15:31 INFO] incremented Z scene to 240 completed views
[Sequencer 13:15:31 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:15:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:15:31 INFO] incremented to [AERI set: name H241, 6 scans, 60 angle, D22500 command] set
[sigmove 13:15:31 INFO] Z240.SIG(18)
[sigmove 13:15:31 DEBUG] transformed Z240Ma.SPC -> Z240MA.SPC
[sigmove 13:15:31 DEBUG] transformed Z240Mb.SPC -> Z240MB.SPC
[sigmove 13:15:31 DEBUG] transformed Z240Mc.SPC -> Z240MC.SPC
[sigmove 13:15:31 DEBUG] transformed Z240Md.SPC -> Z240MD.SPC
[sigmove 13:15:31 DEBUG] transformed Z240Me.SPC -> Z240ME.SPC
[sigmove 13:15:31 DEBUG] transformed Z240Mf.SPC -> Z240MF.SPC
[Status 13:15:31 INFO] data for Z240 transferred to science data processing
[Tidy 13:15:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:15:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:15:31 INFO] resetting WatchDogTimer
[Status 13:15:31 INFO] Starting Set [AERI set: name H241, 6 scans, 60 angle, D22500 command]
[Ingest 13:15:31 INFO] Sending XML status message
[Status 13:15:31 INFO] Mirror angle: 60
[Mirror 13:15:31 INFO] rotating to position H
[Status 13:15:32 INFO] .SET file for ACQ96 ready
[Ingest 13:15:33 INFO] Starting acquisition
[Status 13:15:33 INFO] reading housekeeping
[Status 13:15:51 INFO] acquire complete
[Status 13:15:52 INFO] writing housekeeping
[Sequencer 13:15:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:15:52 INFO] incremented H scene to 241 completed views
[Sequencer 13:15:52 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:15:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:15:52 INFO] incremented to [AERI set: name A241, 6 scans, 120 angle, D28300 command] set
[sigmove 13:15:52 INFO] H241.SIG(18)
[sigmove 13:15:52 DEBUG] transformed H241Ma.SPC -> H241MA.SPC
[sigmove 13:15:52 DEBUG] transformed H241Mb.SPC -> H241MB.SPC
[sigmove 13:15:52 DEBUG] transformed H241Mc.SPC -> H241MC.SPC
[sigmove 13:15:52 DEBUG] transformed H241Md.SPC -> H241MD.SPC
[sigmove 13:15:52 DEBUG] transformed H241Me.SPC -> H241ME.SPC
[sigmove 13:15:52 DEBUG] transformed H241Mf.SPC -> H241MF.SPC
[Status 13:15:52 INFO] data for H241 transferred to science data processing
[Tidy 13:15:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:15:52 INFO] A239.FIN(19),H239.FIN(19),S239.FIN(19),T239.FIN(19),U239.FIN(19),V239.FIN(19),W239.FIN(19),X239.FIN(19),Y239.FIN(19),Z239.FIN(19),A240.FIN(19),H240.FIN(19),S240.FIN(19),T240.FIN(19),U240.FIN(19),V240.FIN(19),W240.FIN(19),X240.FIN(19),Y240.FIN(19),Z240.FIN(19)
[sigmove 13:15:52 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:15:52 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:15:56 DEBUG] done zipping
[WatchDog 13:15:57 INFO] resetting WatchDogTimer
[Status 13:15:57 INFO] Starting Set [AERI set: name A241, 6 scans, 120 angle, D28300 command]
[Ingest 13:15:57 INFO] Sending XML status message
[Status 13:15:57 INFO] Mirror angle: 120
[Mirror 13:15:57 INFO] rotating to position A
[Status 13:15:58 INFO] .SET file for ACQ96 ready
[Ingest 13:15:59 INFO] Starting acquisition
[Status 13:15:59 INFO] reading housekeeping
[Status 13:16:17 INFO] acquire complete
[Status 13:16:18 INFO] writing housekeeping
[Sequencer 13:16:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:16:18 INFO] incremented A scene to 241 completed views
[Sequencer 13:16:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:16:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:16:18 INFO] incremented to [AERI set: name S241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:16:18 INFO] A241.SIG(18)
[sigmove 13:16:18 DEBUG] transformed A241Ma.SPC -> A241MA.SPC
[sigmove 13:16:18 DEBUG] transformed A241Mb.SPC -> A241MB.SPC
[sigmove 13:16:18 DEBUG] transformed A241Mc.SPC -> A241MC.SPC
[sigmove 13:16:18 DEBUG] transformed A241Md.SPC -> A241MD.SPC
[sigmove 13:16:18 DEBUG] transformed A241Me.SPC -> A241ME.SPC
[sigmove 13:16:18 DEBUG] transformed A241Mf.SPC -> A241MF.SPC
[Status 13:16:18 INFO] data for A241 transferred to science data processing
[Tidy 13:16:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:16:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:16:18 INFO] resetting WatchDogTimer
[Status 13:16:18 INFO] Starting Set [AERI set: name S241, 6 scans, 0 angle, D16300 command]
[Ingest 13:16:18 INFO] Sending XML status message
[Status 13:16:18 INFO] Mirror angle: 0
[Mirror 13:16:19 INFO] rotating to position S
[Status 13:16:20 INFO] .SET file for ACQ96 ready
[Ingest 13:16:20 INFO] Starting acquisition
[Status 13:16:21 INFO] reading housekeeping
[Status 13:16:38 INFO] acquire complete
[Status 13:16:39 INFO] writing housekeeping
[Sequencer 13:16:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:16:39 INFO] incremented S scene to 241 completed views
[Sequencer 13:16:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:16:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:16:39 INFO] incremented to [AERI set: name T241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:16:39 INFO] S241.SIG(18)
[sigmove 13:16:39 DEBUG] transformed S241Ma.SPC -> S241MA.SPC
[sigmove 13:16:39 DEBUG] transformed S241Mb.SPC -> S241MB.SPC
[sigmove 13:16:39 DEBUG] transformed S241Mc.SPC -> S241MC.SPC
[sigmove 13:16:39 DEBUG] transformed S241Md.SPC -> S241MD.SPC
[sigmove 13:16:39 DEBUG] transformed S241Me.SPC -> S241ME.SPC
[sigmove 13:16:39 DEBUG] transformed S241Mf.SPC -> S241MF.SPC
[Status 13:16:39 INFO] data for S241 transferred to science data processing
[Tidy 13:16:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:16:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:16:39 INFO] resetting WatchDogTimer
[Status 13:16:40 INFO] Starting Set [AERI set: name T241, 6 scans, 0 angle, D16300 command]
[Ingest 13:16:40 INFO] Sending XML status message
[Status 13:16:40 INFO] Mirror angle: 0
[Mirror 13:16:40 INFO] rotating to position T
[Status 13:16:40 INFO] .SET file for ACQ96 ready
[Ingest 13:16:41 INFO] Starting acquisition
[Status 13:16:41 INFO] reading housekeeping
[Status 13:16:59 INFO] acquire complete
[Status 13:17:00 INFO] writing housekeeping
[Sequencer 13:17:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:17:00 INFO] incremented T scene to 241 completed views
[Sequencer 13:17:00 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:17:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:17:00 INFO] incremented to [AERI set: name U241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:17:00 INFO] T241.SIG(18)
[sigmove 13:17:00 DEBUG] transformed T241Ma.SPC -> T241MA.SPC
[sigmove 13:17:00 DEBUG] transformed T241Mb.SPC -> T241MB.SPC
[sigmove 13:17:00 DEBUG] transformed T241Mc.SPC -> T241MC.SPC
[sigmove 13:17:00 DEBUG] transformed T241Md.SPC -> T241MD.SPC
[sigmove 13:17:00 DEBUG] transformed T241Me.SPC -> T241ME.SPC
[sigmove 13:17:00 DEBUG] transformed T241Mf.SPC -> T241MF.SPC
[Status 13:17:00 INFO] data for T241 transferred to science data processing
[Tidy 13:17:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:17:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:17:00 INFO] resetting WatchDogTimer
[Status 13:17:00 INFO] Starting Set [AERI set: name U241, 6 scans, 0 angle, D16300 command]
[Ingest 13:17:00 INFO] Sending XML status message
[Status 13:17:00 INFO] Mirror angle: 0
[Mirror 13:17:00 INFO] rotating to position U
[Status 13:17:01 INFO] .SET file for ACQ96 ready
[Ingest 13:17:01 INFO] Starting acquisition
[Status 13:17:01 INFO] reading housekeeping
[Status 13:17:19 INFO] acquire complete
[Status 13:17:20 INFO] writing housekeeping
[Sequencer 13:17:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:17:20 INFO] incremented U scene to 241 completed views
[Sequencer 13:17:20 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:17:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:17:20 INFO] incremented to [AERI set: name V241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:17:20 INFO] U241.SIG(18)
[sigmove 13:17:20 DEBUG] transformed U241Ma.SPC -> U241MA.SPC
[sigmove 13:17:20 DEBUG] transformed U241Mb.SPC -> U241MB.SPC
[sigmove 13:17:20 DEBUG] transformed U241Mc.SPC -> U241MC.SPC
[sigmove 13:17:20 DEBUG] transformed U241Md.SPC -> U241MD.SPC
[sigmove 13:17:20 DEBUG] transformed U241Me.SPC -> U241ME.SPC
[sigmove 13:17:20 DEBUG] transformed U241Mf.SPC -> U241MF.SPC
[Status 13:17:20 INFO] data for U241 transferred to science data processing
[Tidy 13:17:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:17:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:17:20 INFO] resetting WatchDogTimer
[Status 13:17:20 INFO] Starting Set [AERI set: name V241, 6 scans, 0 angle, D16300 command]
[Ingest 13:17:20 INFO] Sending XML status message
[Status 13:17:20 INFO] Mirror angle: 0
[Mirror 13:17:20 INFO] rotating to position V
[Status 13:17:21 INFO] .SET file for ACQ96 ready
[Ingest 13:17:21 INFO] Starting acquisition
[Status 13:17:21 INFO] reading housekeeping
[Status 13:17:39 INFO] acquire complete
[Status 13:17:40 INFO] writing housekeeping
[Sequencer 13:17:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:17:40 INFO] incremented V scene to 241 completed views
[Sequencer 13:17:40 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:17:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:17:40 INFO] incremented to [AERI set: name W241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:17:40 INFO] V241.SIG(18)
[sigmove 13:17:40 DEBUG] transformed V241Ma.SPC -> V241MA.SPC
[sigmove 13:17:40 DEBUG] transformed V241Mb.SPC -> V241MB.SPC
[sigmove 13:17:40 DEBUG] transformed V241Mc.SPC -> V241MC.SPC
[sigmove 13:17:40 DEBUG] transformed V241Md.SPC -> V241MD.SPC
[sigmove 13:17:40 DEBUG] transformed V241Me.SPC -> V241ME.SPC
[sigmove 13:17:40 DEBUG] transformed V241Mf.SPC -> V241MF.SPC
[Status 13:17:40 INFO] data for V241 transferred to science data processing
[Tidy 13:17:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:17:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:17:40 INFO] resetting WatchDogTimer
[Status 13:17:40 INFO] Starting Set [AERI set: name W241, 6 scans, 0 angle, D16300 command]
[Ingest 13:17:40 INFO] Sending XML status message
[Status 13:17:40 INFO] Mirror angle: 0
[Mirror 13:17:41 INFO] rotating to position W
[Status 13:17:41 INFO] .SET file for ACQ96 ready
[Ingest 13:17:41 INFO] Starting acquisition
[Status 13:17:42 INFO] reading housekeeping
[Status 13:17:59 INFO] acquire complete
[Status 13:18:00 INFO] writing housekeeping
[Sequencer 13:18:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:18:00 INFO] incremented W scene to 241 completed views
[Sequencer 13:18:00 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:18:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:18:00 INFO] incremented to [AERI set: name X241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:18:00 INFO] W241.SIG(18)
[sigmove 13:18:00 DEBUG] transformed W241Ma.SPC -> W241MA.SPC
[sigmove 13:18:00 DEBUG] transformed W241Mb.SPC -> W241MB.SPC
[sigmove 13:18:00 DEBUG] transformed W241Mc.SPC -> W241MC.SPC
[sigmove 13:18:00 DEBUG] transformed W241Md.SPC -> W241MD.SPC
[sigmove 13:18:00 DEBUG] transformed W241Me.SPC -> W241ME.SPC
[sigmove 13:18:00 DEBUG] transformed W241Mf.SPC -> W241MF.SPC
[Status 13:18:00 INFO] data for W241 transferred to science data processing
[Tidy 13:18:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:18:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:18:00 INFO] resetting WatchDogTimer
[Status 13:18:00 INFO] Starting Set [AERI set: name X241, 6 scans, 0 angle, D16300 command]
[Ingest 13:18:00 INFO] Sending XML status message
[Status 13:18:00 INFO] Mirror angle: 0
[Mirror 13:18:01 INFO] rotating to position X
[Status 13:18:01 INFO] .SET file for ACQ96 ready
[Ingest 13:18:01 INFO] Starting acquisition
[Status 13:18:02 INFO] reading housekeeping
[Status 13:18:19 INFO] acquire complete
[Status 13:18:20 INFO] writing housekeeping
[Sequencer 13:18:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:18:20 INFO] incremented X scene to 241 completed views
[Sequencer 13:18:20 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:18:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:18:20 INFO] incremented to [AERI set: name Y241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:18:20 INFO] X241.SIG(18)
[sigmove 13:18:20 DEBUG] transformed X241Ma.SPC -> X241MA.SPC
[sigmove 13:18:20 DEBUG] transformed X241Mb.SPC -> X241MB.SPC
[sigmove 13:18:20 DEBUG] transformed X241Mc.SPC -> X241MC.SPC
[sigmove 13:18:20 DEBUG] transformed X241Md.SPC -> X241MD.SPC
[sigmove 13:18:20 DEBUG] transformed X241Me.SPC -> X241ME.SPC
[sigmove 13:18:20 DEBUG] transformed X241Mf.SPC -> X241MF.SPC
[Status 13:18:20 INFO] data for X241 transferred to science data processing
[Tidy 13:18:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:18:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:18:20 INFO] resetting WatchDogTimer
[Status 13:18:21 INFO] Starting Set [AERI set: name Y241, 6 scans, 0 angle, D16300 command]
[Ingest 13:18:21 INFO] Sending XML status message
[Status 13:18:21 INFO] Mirror angle: 0
[Mirror 13:18:21 INFO] rotating to position Y
[Status 13:18:21 INFO] .SET file for ACQ96 ready
[Ingest 13:18:22 INFO] Starting acquisition
[Status 13:18:22 INFO] reading housekeeping
[Status 13:18:40 INFO] acquire complete
[Status 13:18:40 INFO] writing housekeeping
[Sequencer 13:18:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:18:40 INFO] incremented Y scene to 241 completed views
[Sequencer 13:18:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:18:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:18:40 INFO] incremented to [AERI set: name Z241, 6 scans, 0 angle, D16300 command] set
[sigmove 13:18:40 INFO] Y241.SIG(18)
[sigmove 13:18:40 DEBUG] transformed Y241Ma.SPC -> Y241MA.SPC
[sigmove 13:18:40 DEBUG] transformed Y241Mb.SPC -> Y241MB.SPC
[sigmove 13:18:40 DEBUG] transformed Y241Mc.SPC -> Y241MC.SPC
[sigmove 13:18:40 DEBUG] transformed Y241Md.SPC -> Y241MD.SPC
[sigmove 13:18:40 DEBUG] transformed Y241Me.SPC -> Y241ME.SPC
[sigmove 13:18:40 DEBUG] transformed Y241Mf.SPC -> Y241MF.SPC
[Status 13:18:40 INFO] data for Y241 transferred to science data processing
[Tidy 13:18:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:18:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:18:40 INFO] resetting WatchDogTimer
[Status 13:18:41 INFO] Starting Set [AERI set: name Z241, 6 scans, 0 angle, D16300 command]
[Ingest 13:18:41 INFO] Sending XML status message
[Status 13:18:41 INFO] Mirror angle: 0
[Mirror 13:18:41 INFO] rotating to position Z
[Status 13:18:42 INFO] .SET file for ACQ96 ready
[Ingest 13:18:42 INFO] Starting acquisition
[Status 13:18:42 INFO] reading housekeeping
[Status 13:19:00 INFO] acquire complete
[Status 13:19:01 INFO] writing housekeeping
[Sequencer 13:19:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:19:01 INFO] incremented Z scene to 241 completed views
[Sequencer 13:19:01 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:19:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:19:01 INFO] incremented to [AERI set: name A242, 6 scans, 120 angle, D28300 command] set
[sigmove 13:19:01 INFO] Z241.SIG(18)
[sigmove 13:19:01 DEBUG] transformed Z241Ma.SPC -> Z241MA.SPC
[sigmove 13:19:01 DEBUG] transformed Z241Mb.SPC -> Z241MB.SPC
[sigmove 13:19:01 DEBUG] transformed Z241Mc.SPC -> Z241MC.SPC
[sigmove 13:19:01 DEBUG] transformed Z241Md.SPC -> Z241MD.SPC
[sigmove 13:19:01 DEBUG] transformed Z241Me.SPC -> Z241ME.SPC
[sigmove 13:19:01 DEBUG] transformed Z241Mf.SPC -> Z241MF.SPC
[Status 13:19:01 INFO] data for Z241 transferred to science data processing
[Tidy 13:19:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:19:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:19:01 INFO] resetting WatchDogTimer
[Status 13:19:01 INFO] Starting Set [AERI set: name A242, 6 scans, 120 angle, D28300 command]
[Ingest 13:19:01 INFO] Sending XML status message
[Status 13:19:01 INFO] Mirror angle: 120
[Mirror 13:19:01 INFO] rotating to position A
[Status 13:19:03 INFO] .SET file for ACQ96 ready
[Ingest 13:19:03 INFO] Starting acquisition
[Status 13:19:03 INFO] reading housekeeping
[Status 13:19:21 INFO] acquire complete
[Status 13:19:22 INFO] writing housekeeping
[Sequencer 13:19:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:19:22 INFO] incremented A scene to 242 completed views
[Sequencer 13:19:22 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:19:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:19:22 INFO] incremented to [AERI set: name H242, 6 scans, 60 angle, D22500 command] set
[sigmove 13:19:22 INFO] A242.SIG(18)
[sigmove 13:19:22 DEBUG] transformed A242Ma.SPC -> A242MA.SPC
[sigmove 13:19:22 DEBUG] transformed A242Mb.SPC -> A242MB.SPC
[sigmove 13:19:22 DEBUG] transformed A242Mc.SPC -> A242MC.SPC
[sigmove 13:19:22 DEBUG] transformed A242Md.SPC -> A242MD.SPC
[sigmove 13:19:22 DEBUG] transformed A242Me.SPC -> A242ME.SPC
[sigmove 13:19:22 DEBUG] transformed A242Mf.SPC -> A242MF.SPC
[Status 13:19:22 INFO] data for A242 transferred to science data processing
[Tidy 13:19:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:19:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:19:22 INFO] resetting WatchDogTimer
[Status 13:19:22 INFO] Starting Set [AERI set: name H242, 6 scans, 60 angle, D22500 command]
[Ingest 13:19:22 INFO] Sending XML status message
[Status 13:19:22 INFO] Mirror angle: 60
[Mirror 13:19:23 INFO] rotating to position H
[Status 13:19:24 INFO] .SET file for ACQ96 ready
[Ingest 13:19:24 INFO] Starting acquisition
[Status 13:19:24 INFO] reading housekeeping
[Status 13:19:42 INFO] acquire complete
[Status 13:19:43 INFO] writing housekeeping
[Sequencer 13:19:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:19:43 INFO] incremented H scene to 242 completed views
[Sequencer 13:19:43 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:19:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:19:43 INFO] incremented to [AERI set: name S242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:19:43 INFO] H242.SIG(18)
[sigmove 13:19:43 DEBUG] transformed H242Ma.SPC -> H242MA.SPC
[sigmove 13:19:43 DEBUG] transformed H242Mb.SPC -> H242MB.SPC
[sigmove 13:19:43 DEBUG] transformed H242Mc.SPC -> H242MC.SPC
[sigmove 13:19:43 DEBUG] transformed H242Md.SPC -> H242MD.SPC
[sigmove 13:19:43 DEBUG] transformed H242Me.SPC -> H242ME.SPC
[sigmove 13:19:43 DEBUG] transformed H242Mf.SPC -> H242MF.SPC
[Status 13:19:43 INFO] data for H242 transferred to science data processing
[Tidy 13:19:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:19:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:19:43 INFO] resetting WatchDogTimer
[Status 13:19:44 INFO] Starting Set [AERI set: name S242, 6 scans, 0 angle, D16300 command]
[Ingest 13:19:44 INFO] Sending XML status message
[Status 13:19:44 INFO] Mirror angle: 0
[Mirror 13:19:44 INFO] rotating to position S
[Status 13:19:45 INFO] .SET file for ACQ96 ready
[Ingest 13:19:45 INFO] Starting acquisition
[Status 13:19:46 INFO] reading housekeeping
[Status 13:20:04 INFO] acquire complete
[Status 13:20:05 INFO] writing housekeeping
[Sequencer 13:20:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:20:05 INFO] incremented S scene to 242 completed views
[Sequencer 13:20:05 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:20:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:20:05 INFO] incremented to [AERI set: name T242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:20:05 INFO] S242.SIG(18)
[sigmove 13:20:05 DEBUG] transformed S242Ma.SPC -> S242MA.SPC
[sigmove 13:20:05 DEBUG] transformed S242Mb.SPC -> S242MB.SPC
[sigmove 13:20:05 DEBUG] transformed S242Mc.SPC -> S242MC.SPC
[sigmove 13:20:05 DEBUG] transformed S242Md.SPC -> S242MD.SPC
[sigmove 13:20:05 DEBUG] transformed S242Me.SPC -> S242ME.SPC
[sigmove 13:20:05 DEBUG] transformed S242Mf.SPC -> S242MF.SPC
[Status 13:20:05 INFO] data for S242 transferred to science data processing
[Tidy 13:20:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:20:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:20:05 INFO] resetting WatchDogTimer
[Status 13:20:05 INFO] Starting Set [AERI set: name T242, 6 scans, 0 angle, D16300 command]
[Ingest 13:20:05 INFO] Sending XML status message
[Status 13:20:05 INFO] Mirror angle: 0
[Mirror 13:20:05 INFO] rotating to position T
[Status 13:20:06 INFO] .SET file for ACQ96 ready
[Ingest 13:20:06 INFO] Starting acquisition
[Status 13:20:06 INFO] reading housekeeping
[Status 13:20:24 INFO] acquire complete
[Status 13:20:25 INFO] writing housekeeping
[Sequencer 13:20:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:20:25 INFO] incremented T scene to 242 completed views
[Sequencer 13:20:25 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:20:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:20:25 INFO] incremented to [AERI set: name U242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:20:25 INFO] T242.SIG(18)
[sigmove 13:20:25 DEBUG] transformed T242Ma.SPC -> T242MA.SPC
[sigmove 13:20:25 DEBUG] transformed T242Mb.SPC -> T242MB.SPC
[sigmove 13:20:25 DEBUG] transformed T242Mc.SPC -> T242MC.SPC
[sigmove 13:20:25 DEBUG] transformed T242Md.SPC -> T242MD.SPC
[sigmove 13:20:25 DEBUG] transformed T242Me.SPC -> T242ME.SPC
[sigmove 13:20:25 DEBUG] transformed T242Mf.SPC -> T242MF.SPC
[Status 13:20:25 INFO] data for T242 transferred to science data processing
[Tidy 13:20:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:20:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:20:25 INFO] resetting WatchDogTimer
[Status 13:20:25 INFO] Starting Set [AERI set: name U242, 6 scans, 0 angle, D16300 command]
[Ingest 13:20:25 INFO] Sending XML status message
[Status 13:20:25 INFO] Mirror angle: 0
[Mirror 13:20:25 INFO] rotating to position U
[Status 13:20:26 INFO] .SET file for ACQ96 ready
[Ingest 13:20:26 INFO] Starting acquisition
[Status 13:20:26 INFO] reading housekeeping
[Status 13:20:44 INFO] acquire complete
[Status 13:20:45 INFO] writing housekeeping
[Sequencer 13:20:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:20:45 INFO] incremented U scene to 242 completed views
[Sequencer 13:20:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:20:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:20:45 INFO] incremented to [AERI set: name V242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:20:45 INFO] U242.SIG(18)
[sigmove 13:20:45 DEBUG] transformed U242Ma.SPC -> U242MA.SPC
[sigmove 13:20:45 DEBUG] transformed U242Mb.SPC -> U242MB.SPC
[sigmove 13:20:45 DEBUG] transformed U242Mc.SPC -> U242MC.SPC
[sigmove 13:20:45 DEBUG] transformed U242Md.SPC -> U242MD.SPC
[sigmove 13:20:45 DEBUG] transformed U242Me.SPC -> U242ME.SPC
[sigmove 13:20:45 DEBUG] transformed U242Mf.SPC -> U242MF.SPC
[Status 13:20:45 INFO] data for U242 transferred to science data processing
[Tidy 13:20:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:20:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:20:45 INFO] resetting WatchDogTimer
[Status 13:20:45 INFO] Starting Set [AERI set: name V242, 6 scans, 0 angle, D16300 command]
[Ingest 13:20:45 INFO] Sending XML status message
[Status 13:20:45 INFO] Mirror angle: 0
[Mirror 13:20:46 INFO] rotating to position V
[Status 13:20:46 INFO] .SET file for ACQ96 ready
[Ingest 13:20:46 INFO] Starting acquisition
[Status 13:20:47 INFO] reading housekeeping
[Status 13:21:04 INFO] acquire complete
[Status 13:21:05 INFO] writing housekeeping
[Sequencer 13:21:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:21:05 INFO] incremented V scene to 242 completed views
[Sequencer 13:21:05 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:21:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:21:05 INFO] incremented to [AERI set: name W242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:21:05 INFO] V242.SIG(18)
[sigmove 13:21:05 DEBUG] transformed V242Ma.SPC -> V242MA.SPC
[sigmove 13:21:05 DEBUG] transformed V242Mb.SPC -> V242MB.SPC
[sigmove 13:21:05 DEBUG] transformed V242Mc.SPC -> V242MC.SPC
[sigmove 13:21:05 DEBUG] transformed V242Md.SPC -> V242MD.SPC
[sigmove 13:21:05 DEBUG] transformed V242Me.SPC -> V242ME.SPC
[sigmove 13:21:05 DEBUG] transformed V242Mf.SPC -> V242MF.SPC
[Status 13:21:05 INFO] data for V242 transferred to science data processing
[Tidy 13:21:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:21:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:21:05 INFO] resetting WatchDogTimer
[Status 13:21:05 INFO] Starting Set [AERI set: name W242, 6 scans, 0 angle, D16300 command]
[Ingest 13:21:05 INFO] Sending XML status message
[Status 13:21:05 INFO] Mirror angle: 0
[Mirror 13:21:06 INFO] rotating to position W
[Status 13:21:06 INFO] .SET file for ACQ96 ready
[Ingest 13:21:07 INFO] Starting acquisition
[Status 13:21:07 INFO] reading housekeeping
[Status 13:21:25 INFO] acquire complete
[Status 13:21:25 INFO] writing housekeeping
[Sequencer 13:21:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:21:25 INFO] incremented W scene to 242 completed views
[Sequencer 13:21:25 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:21:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:21:25 INFO] incremented to [AERI set: name X242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:21:25 INFO] W242.SIG(18)
[sigmove 13:21:25 DEBUG] transformed W242Ma.SPC -> W242MA.SPC
[sigmove 13:21:25 DEBUG] transformed W242Mb.SPC -> W242MB.SPC
[sigmove 13:21:25 DEBUG] transformed W242Mc.SPC -> W242MC.SPC
[sigmove 13:21:25 DEBUG] transformed W242Md.SPC -> W242MD.SPC
[sigmove 13:21:25 DEBUG] transformed W242Me.SPC -> W242ME.SPC
[sigmove 13:21:25 DEBUG] transformed W242Mf.SPC -> W242MF.SPC
[Status 13:21:25 INFO] data for W242 transferred to science data processing
[Tidy 13:21:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:21:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:21:25 INFO] resetting WatchDogTimer
[Status 13:21:26 INFO] Starting Set [AERI set: name X242, 6 scans, 0 angle, D16300 command]
[Ingest 13:21:26 INFO] Sending XML status message
[Status 13:21:26 INFO] Mirror angle: 0
[Mirror 13:21:26 INFO] rotating to position X
[Status 13:21:26 INFO] .SET file for ACQ96 ready
[Ingest 13:21:27 INFO] Starting acquisition
[Status 13:21:27 INFO] reading housekeeping
[Status 13:21:45 INFO] acquire complete
[Status 13:21:46 INFO] writing housekeeping
[Sequencer 13:21:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:21:46 INFO] incremented X scene to 242 completed views
[Sequencer 13:21:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:21:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:21:46 INFO] incremented to [AERI set: name Y242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:21:46 INFO] X242.SIG(18)
[sigmove 13:21:46 DEBUG] transformed X242Ma.SPC -> X242MA.SPC
[sigmove 13:21:46 DEBUG] transformed X242Mb.SPC -> X242MB.SPC
[sigmove 13:21:46 DEBUG] transformed X242Mc.SPC -> X242MC.SPC
[sigmove 13:21:46 DEBUG] transformed X242Md.SPC -> X242MD.SPC
[sigmove 13:21:46 DEBUG] transformed X242Me.SPC -> X242ME.SPC
[sigmove 13:21:46 DEBUG] transformed X242Mf.SPC -> X242MF.SPC
[Status 13:21:46 INFO] data for X242 transferred to science data processing
[Tidy 13:21:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:21:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:21:46 INFO] resetting WatchDogTimer
[Status 13:21:46 INFO] Starting Set [AERI set: name Y242, 6 scans, 0 angle, D16300 command]
[Ingest 13:21:46 INFO] Sending XML status message
[Status 13:21:46 INFO] Mirror angle: 0
[Mirror 13:21:46 INFO] rotating to position Y
[Status 13:21:47 INFO] .SET file for ACQ96 ready
[Ingest 13:21:47 INFO] Starting acquisition
[Status 13:21:47 INFO] reading housekeeping
[Status 13:22:05 INFO] acquire complete
[Status 13:22:06 INFO] writing housekeeping
[Sequencer 13:22:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:22:06 INFO] incremented Y scene to 242 completed views
[Sequencer 13:22:06 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:22:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:22:06 INFO] incremented to [AERI set: name Z242, 6 scans, 0 angle, D16300 command] set
[sigmove 13:22:06 INFO] Y242.SIG(18)
[sigmove 13:22:06 DEBUG] transformed Y242Ma.SPC -> Y242MA.SPC
[sigmove 13:22:06 DEBUG] transformed Y242Mb.SPC -> Y242MB.SPC
[sigmove 13:22:06 DEBUG] transformed Y242Mc.SPC -> Y242MC.SPC
[sigmove 13:22:06 DEBUG] transformed Y242Md.SPC -> Y242MD.SPC
[sigmove 13:22:06 DEBUG] transformed Y242Me.SPC -> Y242ME.SPC
[sigmove 13:22:06 DEBUG] transformed Y242Mf.SPC -> Y242MF.SPC
[Status 13:22:06 INFO] data for Y242 transferred to science data processing
[Tidy 13:22:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:22:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:22:06 INFO] resetting WatchDogTimer
[Status 13:22:06 INFO] Starting Set [AERI set: name Z242, 6 scans, 0 angle, D16300 command]
[Ingest 13:22:06 INFO] Sending XML status message
[Status 13:22:06 INFO] Mirror angle: 0
[Mirror 13:22:06 INFO] rotating to position Z
[Status 13:22:07 INFO] .SET file for ACQ96 ready
[Ingest 13:22:07 INFO] Starting acquisition
[Status 13:22:07 INFO] reading housekeeping
[Status 13:22:25 INFO] acquire complete
[Status 13:22:26 INFO] writing housekeeping
[Sequencer 13:22:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:22:26 INFO] incremented Z scene to 242 completed views
[Sequencer 13:22:26 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:22:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:22:26 INFO] incremented to [AERI set: name H243, 6 scans, 60 angle, D22500 command] set
[sigmove 13:22:26 INFO] Z242.SIG(18)
[sigmove 13:22:26 DEBUG] transformed Z242Ma.SPC -> Z242MA.SPC
[sigmove 13:22:26 DEBUG] transformed Z242Mb.SPC -> Z242MB.SPC
[sigmove 13:22:26 DEBUG] transformed Z242Mc.SPC -> Z242MC.SPC
[sigmove 13:22:26 DEBUG] transformed Z242Md.SPC -> Z242MD.SPC
[sigmove 13:22:26 DEBUG] transformed Z242Me.SPC -> Z242ME.SPC
[sigmove 13:22:26 DEBUG] transformed Z242Mf.SPC -> Z242MF.SPC
[Status 13:22:26 INFO] data for Z242 transferred to science data processing
[Tidy 13:22:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:22:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:22:26 INFO] resetting WatchDogTimer
[Status 13:22:26 INFO] Starting Set [AERI set: name H243, 6 scans, 60 angle, D22500 command]
[Ingest 13:22:26 INFO] Sending XML status message
[Status 13:22:26 INFO] Mirror angle: 60
[Mirror 13:22:27 INFO] rotating to position H
[Status 13:22:28 INFO] .SET file for ACQ96 ready
[Ingest 13:22:28 INFO] Starting acquisition
[Status 13:22:28 INFO] reading housekeeping
[Status 13:22:46 INFO] acquire complete
[Status 13:22:47 INFO] writing housekeeping
[Sequencer 13:22:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:22:47 INFO] incremented H scene to 243 completed views
[Sequencer 13:22:47 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:22:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:22:47 INFO] incremented to [AERI set: name A243, 6 scans, 120 angle, D28300 command] set
[sigmove 13:22:47 INFO] H243.SIG(18)
[sigmove 13:22:47 DEBUG] transformed H243Ma.SPC -> H243MA.SPC
[sigmove 13:22:47 DEBUG] transformed H243Mb.SPC -> H243MB.SPC
[sigmove 13:22:47 DEBUG] transformed H243Mc.SPC -> H243MC.SPC
[sigmove 13:22:47 DEBUG] transformed H243Md.SPC -> H243MD.SPC
[sigmove 13:22:47 DEBUG] transformed H243Me.SPC -> H243ME.SPC
[sigmove 13:22:47 DEBUG] transformed H243Mf.SPC -> H243MF.SPC
[Status 13:22:47 INFO] data for H243 transferred to science data processing
[Tidy 13:22:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:22:47 INFO] A241.FIN(19),H241.FIN(19),S241.FIN(19),T241.FIN(19),U241.FIN(19),V241.FIN(19),W241.FIN(19),X241.FIN(19),Y241.FIN(19),Z241.FIN(19),A242.FIN(19),H242.FIN(19),S242.FIN(19),T242.FIN(19),U242.FIN(19),V242.FIN(19),W242.FIN(19),X242.FIN(19),Y242.FIN(19),Z242.FIN(19)
[sigmove 13:22:47 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:22:47 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:22:52 DEBUG] done zipping
[WatchDog 13:22:52 INFO] resetting WatchDogTimer
[Status 13:22:52 INFO] Starting Set [AERI set: name A243, 6 scans, 120 angle, D28300 command]
[Ingest 13:22:52 INFO] Sending XML status message
[Status 13:22:52 INFO] Mirror angle: 120
[Mirror 13:22:53 INFO] rotating to position A
[Status 13:22:54 INFO] .SET file for ACQ96 ready
[Ingest 13:22:54 INFO] Starting acquisition
[Status 13:22:54 INFO] reading housekeeping
[Status 13:23:12 INFO] acquire complete
[Status 13:23:13 INFO] writing housekeeping
[Sequencer 13:23:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:23:13 INFO] incremented A scene to 243 completed views
[Sequencer 13:23:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:23:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:23:13 INFO] incremented to [AERI set: name S243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:23:13 INFO] A243.SIG(18)
[sigmove 13:23:13 DEBUG] transformed A243Ma.SPC -> A243MA.SPC
[sigmove 13:23:13 DEBUG] transformed A243Mb.SPC -> A243MB.SPC
[sigmove 13:23:13 DEBUG] transformed A243Mc.SPC -> A243MC.SPC
[sigmove 13:23:13 DEBUG] transformed A243Md.SPC -> A243MD.SPC
[sigmove 13:23:13 DEBUG] transformed A243Me.SPC -> A243ME.SPC
[sigmove 13:23:13 DEBUG] transformed A243Mf.SPC -> A243MF.SPC
[Status 13:23:13 INFO] data for A243 transferred to science data processing
[Tidy 13:23:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:23:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:23:13 INFO] resetting WatchDogTimer
[Status 13:23:13 INFO] Starting Set [AERI set: name S243, 6 scans, 0 angle, D16300 command]
[Ingest 13:23:13 INFO] Sending XML status message
[Status 13:23:13 INFO] Mirror angle: 0
[Mirror 13:23:14 INFO] rotating to position S
[Status 13:23:15 INFO] .SET file for ACQ96 ready
[Ingest 13:23:15 INFO] Starting acquisition
[Status 13:23:16 INFO] reading housekeeping
[Status 13:23:34 INFO] acquire complete
[Status 13:23:34 INFO] writing housekeeping
[Sequencer 13:23:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:23:34 INFO] incremented S scene to 243 completed views
[Sequencer 13:23:34 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:23:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:23:34 INFO] incremented to [AERI set: name T243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:23:34 INFO] S243.SIG(18)
[sigmove 13:23:34 DEBUG] transformed S243Ma.SPC -> S243MA.SPC
[sigmove 13:23:34 DEBUG] transformed S243Mb.SPC -> S243MB.SPC
[sigmove 13:23:34 DEBUG] transformed S243Mc.SPC -> S243MC.SPC
[sigmove 13:23:34 DEBUG] transformed S243Md.SPC -> S243MD.SPC
[sigmove 13:23:34 DEBUG] transformed S243Me.SPC -> S243ME.SPC
[sigmove 13:23:34 DEBUG] transformed S243Mf.SPC -> S243MF.SPC
[Status 13:23:34 INFO] data for S243 transferred to science data processing
[Tidy 13:23:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:23:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:23:34 INFO] resetting WatchDogTimer
[Status 13:23:35 INFO] Starting Set [AERI set: name T243, 6 scans, 0 angle, D16300 command]
[Ingest 13:23:35 INFO] Sending XML status message
[Status 13:23:35 INFO] Mirror angle: 0
[Mirror 13:23:35 INFO] rotating to position T
[Status 13:23:36 INFO] .SET file for ACQ96 ready
[Ingest 13:23:36 INFO] Starting acquisition
[Status 13:23:36 INFO] reading housekeeping
[Status 13:23:54 INFO] acquire complete
[Status 13:23:55 INFO] writing housekeeping
[Sequencer 13:23:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:23:55 INFO] incremented T scene to 243 completed views
[Sequencer 13:23:55 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:23:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:23:55 INFO] incremented to [AERI set: name U243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:23:55 INFO] T243.SIG(18)
[sigmove 13:23:55 DEBUG] transformed T243Ma.SPC -> T243MA.SPC
[sigmove 13:23:55 DEBUG] transformed T243Mb.SPC -> T243MB.SPC
[sigmove 13:23:55 DEBUG] transformed T243Mc.SPC -> T243MC.SPC
[sigmove 13:23:55 DEBUG] transformed T243Md.SPC -> T243MD.SPC
[sigmove 13:23:55 DEBUG] transformed T243Me.SPC -> T243ME.SPC
[sigmove 13:23:55 DEBUG] transformed T243Mf.SPC -> T243MF.SPC
[Status 13:23:55 INFO] data for T243 transferred to science data processing
[Tidy 13:23:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:23:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:23:55 INFO] resetting WatchDogTimer
[Status 13:23:55 INFO] Starting Set [AERI set: name U243, 6 scans, 0 angle, D16300 command]
[Ingest 13:23:55 INFO] Sending XML status message
[Status 13:23:55 INFO] Mirror angle: 0
[Mirror 13:23:55 INFO] rotating to position U
[Status 13:23:56 INFO] .SET file for ACQ96 ready
[Ingest 13:23:56 INFO] Starting acquisition
[Status 13:23:56 INFO] reading housekeeping
[Status 13:24:14 INFO] acquire complete
[Status 13:24:15 INFO] writing housekeeping
[Sequencer 13:24:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:24:15 INFO] incremented U scene to 243 completed views
[Sequencer 13:24:15 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:24:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:24:15 INFO] incremented to [AERI set: name V243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:24:15 INFO] U243.SIG(18)
[sigmove 13:24:15 DEBUG] transformed U243Ma.SPC -> U243MA.SPC
[sigmove 13:24:15 DEBUG] transformed U243Mb.SPC -> U243MB.SPC
[sigmove 13:24:15 DEBUG] transformed U243Mc.SPC -> U243MC.SPC
[sigmove 13:24:15 DEBUG] transformed U243Md.SPC -> U243MD.SPC
[sigmove 13:24:15 DEBUG] transformed U243Me.SPC -> U243ME.SPC
[sigmove 13:24:15 DEBUG] transformed U243Mf.SPC -> U243MF.SPC
[Status 13:24:15 INFO] data for U243 transferred to science data processing
[Tidy 13:24:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:24:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:24:15 INFO] resetting WatchDogTimer
[Status 13:24:15 INFO] Starting Set [AERI set: name V243, 6 scans, 0 angle, D16300 command]
[Ingest 13:24:15 INFO] Sending XML status message
[Status 13:24:15 INFO] Mirror angle: 0
[Mirror 13:24:15 INFO] rotating to position V
[Status 13:24:16 INFO] .SET file for ACQ96 ready
[Ingest 13:24:16 INFO] Starting acquisition
[Status 13:24:16 INFO] reading housekeeping
[Status 13:24:34 INFO] acquire complete
[Status 13:24:35 INFO] writing housekeeping
[Sequencer 13:24:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:24:35 INFO] incremented V scene to 243 completed views
[Sequencer 13:24:35 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:24:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:24:35 INFO] incremented to [AERI set: name W243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:24:35 INFO] V243.SIG(18)
[sigmove 13:24:35 DEBUG] transformed V243Ma.SPC -> V243MA.SPC
[sigmove 13:24:35 DEBUG] transformed V243Mb.SPC -> V243MB.SPC
[sigmove 13:24:35 DEBUG] transformed V243Mc.SPC -> V243MC.SPC
[sigmove 13:24:35 DEBUG] transformed V243Md.SPC -> V243MD.SPC
[sigmove 13:24:35 DEBUG] transformed V243Me.SPC -> V243ME.SPC
[sigmove 13:24:35 DEBUG] transformed V243Mf.SPC -> V243MF.SPC
[Status 13:24:35 INFO] data for V243 transferred to science data processing
[Tidy 13:24:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:24:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:24:35 INFO] resetting WatchDogTimer
[Status 13:24:35 INFO] Starting Set [AERI set: name W243, 6 scans, 0 angle, D16300 command]
[Ingest 13:24:35 INFO] Sending XML status message
[Status 13:24:35 INFO] Mirror angle: 0
[Mirror 13:24:36 INFO] rotating to position W
[Status 13:24:36 INFO] .SET file for ACQ96 ready
[Ingest 13:24:36 INFO] Starting acquisition
[Status 13:24:37 INFO] reading housekeeping
[Status 13:24:54 INFO] acquire complete
[Status 13:24:55 INFO] writing housekeeping
[Sequencer 13:24:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:24:55 INFO] incremented W scene to 243 completed views
[Sequencer 13:24:55 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:24:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:24:55 INFO] incremented to [AERI set: name X243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:24:55 INFO] W243.SIG(18)
[sigmove 13:24:55 DEBUG] transformed W243Ma.SPC -> W243MA.SPC
[sigmove 13:24:55 DEBUG] transformed W243Mb.SPC -> W243MB.SPC
[sigmove 13:24:55 DEBUG] transformed W243Mc.SPC -> W243MC.SPC
[sigmove 13:24:55 DEBUG] transformed W243Md.SPC -> W243MD.SPC
[sigmove 13:24:55 DEBUG] transformed W243Me.SPC -> W243ME.SPC
[sigmove 13:24:55 DEBUG] transformed W243Mf.SPC -> W243MF.SPC
[Status 13:24:55 INFO] data for W243 transferred to science data processing
[Tidy 13:24:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:24:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:24:55 INFO] resetting WatchDogTimer
[Status 13:24:56 INFO] Starting Set [AERI set: name X243, 6 scans, 0 angle, D16300 command]
[Ingest 13:24:56 INFO] Sending XML status message
[Status 13:24:56 INFO] Mirror angle: 0
[Mirror 13:24:56 INFO] rotating to position X
[Status 13:24:56 INFO] .SET file for ACQ96 ready
[Ingest 13:24:57 INFO] Starting acquisition
[Status 13:24:57 INFO] reading housekeeping
[Status 13:25:15 INFO] acquire complete
[Status 13:25:15 INFO] writing housekeeping
[Sequencer 13:25:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:25:15 INFO] incremented X scene to 243 completed views
[Sequencer 13:25:15 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:25:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:25:15 INFO] incremented to [AERI set: name Y243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:25:15 INFO] X243.SIG(18)
[sigmove 13:25:15 DEBUG] transformed X243Ma.SPC -> X243MA.SPC
[sigmove 13:25:15 DEBUG] transformed X243Mb.SPC -> X243MB.SPC
[sigmove 13:25:15 DEBUG] transformed X243Mc.SPC -> X243MC.SPC
[sigmove 13:25:15 DEBUG] transformed X243Md.SPC -> X243MD.SPC
[sigmove 13:25:15 DEBUG] transformed X243Me.SPC -> X243ME.SPC
[sigmove 13:25:15 DEBUG] transformed X243Mf.SPC -> X243MF.SPC
[Status 13:25:15 INFO] data for X243 transferred to science data processing
[Tidy 13:25:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:25:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:25:15 INFO] resetting WatchDogTimer
[Status 13:25:16 INFO] Starting Set [AERI set: name Y243, 6 scans, 0 angle, D16300 command]
[Ingest 13:25:16 INFO] Sending XML status message
[Status 13:25:16 INFO] Mirror angle: 0
[Mirror 13:25:16 INFO] rotating to position Y
[Status 13:25:16 INFO] .SET file for ACQ96 ready
[Ingest 13:25:17 INFO] Starting acquisition
[Status 13:25:17 INFO] reading housekeeping
[Status 13:25:35 INFO] acquire complete
[Status 13:25:36 INFO] writing housekeeping
[Sequencer 13:25:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:25:36 INFO] incremented Y scene to 243 completed views
[Sequencer 13:25:36 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:25:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:25:36 INFO] incremented to [AERI set: name Z243, 6 scans, 0 angle, D16300 command] set
[sigmove 13:25:36 INFO] Y243.SIG(18)
[sigmove 13:25:36 DEBUG] transformed Y243Ma.SPC -> Y243MA.SPC
[sigmove 13:25:36 DEBUG] transformed Y243Mb.SPC -> Y243MB.SPC
[sigmove 13:25:36 DEBUG] transformed Y243Mc.SPC -> Y243MC.SPC
[sigmove 13:25:36 DEBUG] transformed Y243Md.SPC -> Y243MD.SPC
[sigmove 13:25:36 DEBUG] transformed Y243Me.SPC -> Y243ME.SPC
[sigmove 13:25:36 DEBUG] transformed Y243Mf.SPC -> Y243MF.SPC
[Status 13:25:36 INFO] data for Y243 transferred to science data processing
[Tidy 13:25:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:25:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:25:36 INFO] resetting WatchDogTimer
[Status 13:25:36 INFO] Starting Set [AERI set: name Z243, 6 scans, 0 angle, D16300 command]
[Ingest 13:25:36 INFO] Sending XML status message
[Status 13:25:36 INFO] Mirror angle: 0
[Mirror 13:25:36 INFO] rotating to position Z
[Status 13:25:37 INFO] .SET file for ACQ96 ready
[Ingest 13:25:37 INFO] Starting acquisition
[Status 13:25:37 INFO] reading housekeeping
[Status 13:25:55 INFO] acquire complete
[Status 13:25:56 INFO] writing housekeeping
[Sequencer 13:25:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:25:56 INFO] incremented Z scene to 243 completed views
[Sequencer 13:25:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:25:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:25:56 INFO] incremented to [AERI set: name A244, 6 scans, 120 angle, D28300 command] set
[sigmove 13:25:56 INFO] Z243.SIG(18)
[sigmove 13:25:56 DEBUG] transformed Z243Ma.SPC -> Z243MA.SPC
[sigmove 13:25:56 DEBUG] transformed Z243Mb.SPC -> Z243MB.SPC
[sigmove 13:25:56 DEBUG] transformed Z243Mc.SPC -> Z243MC.SPC
[sigmove 13:25:56 DEBUG] transformed Z243Md.SPC -> Z243MD.SPC
[sigmove 13:25:56 DEBUG] transformed Z243Me.SPC -> Z243ME.SPC
[sigmove 13:25:56 DEBUG] transformed Z243Mf.SPC -> Z243MF.SPC
[Status 13:25:56 INFO] data for Z243 transferred to science data processing
[Tidy 13:25:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:25:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:25:56 INFO] resetting WatchDogTimer
[Status 13:25:56 INFO] Starting Set [AERI set: name A244, 6 scans, 120 angle, D28300 command]
[Ingest 13:25:56 INFO] Sending XML status message
[Status 13:25:56 INFO] Mirror angle: 120
[Mirror 13:25:56 INFO] rotating to position A
[Status 13:25:58 INFO] .SET file for ACQ96 ready
[Ingest 13:25:58 INFO] Starting acquisition
[Status 13:25:59 INFO] reading housekeeping
[Status 13:26:16 INFO] acquire complete
[Status 13:26:17 INFO] writing housekeeping
[Sequencer 13:26:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:26:17 INFO] incremented A scene to 244 completed views
[Sequencer 13:26:17 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:26:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:26:17 INFO] incremented to [AERI set: name H244, 6 scans, 60 angle, D22500 command] set
[sigmove 13:26:17 INFO] A244.SIG(18)
[sigmove 13:26:17 DEBUG] transformed A244Ma.SPC -> A244MA.SPC
[sigmove 13:26:17 DEBUG] transformed A244Mb.SPC -> A244MB.SPC
[sigmove 13:26:17 DEBUG] transformed A244Mc.SPC -> A244MC.SPC
[sigmove 13:26:17 DEBUG] transformed A244Md.SPC -> A244MD.SPC
[sigmove 13:26:17 DEBUG] transformed A244Me.SPC -> A244ME.SPC
[sigmove 13:26:17 DEBUG] transformed A244Mf.SPC -> A244MF.SPC
[Status 13:26:17 INFO] data for A244 transferred to science data processing
[Tidy 13:26:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:26:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:26:17 INFO] resetting WatchDogTimer
[Status 13:26:17 INFO] Starting Set [AERI set: name H244, 6 scans, 60 angle, D22500 command]
[Ingest 13:26:17 INFO] Sending XML status message
[Status 13:26:17 INFO] Mirror angle: 60
[Mirror 13:26:18 INFO] rotating to position H
[Status 13:26:19 INFO] .SET file for ACQ96 ready
[Ingest 13:26:19 INFO] Starting acquisition
[Status 13:26:19 INFO] reading housekeeping
[Status 13:26:38 INFO] acquire complete
[Status 13:26:38 INFO] writing housekeeping
[Sequencer 13:26:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:26:38 INFO] incremented H scene to 244 completed views
[Sequencer 13:26:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:26:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:26:38 INFO] incremented to [AERI set: name S244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:26:38 INFO] H244.SIG(18)
[sigmove 13:26:38 DEBUG] transformed H244Ma.SPC -> H244MA.SPC
[sigmove 13:26:38 DEBUG] transformed H244Mb.SPC -> H244MB.SPC
[sigmove 13:26:38 DEBUG] transformed H244Mc.SPC -> H244MC.SPC
[sigmove 13:26:38 DEBUG] transformed H244Md.SPC -> H244MD.SPC
[sigmove 13:26:38 DEBUG] transformed H244Me.SPC -> H244ME.SPC
[sigmove 13:26:38 DEBUG] transformed H244Mf.SPC -> H244MF.SPC
[Status 13:26:38 INFO] data for H244 transferred to science data processing
[Tidy 13:26:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:26:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:26:38 INFO] resetting WatchDogTimer
[Status 13:26:39 INFO] Starting Set [AERI set: name S244, 6 scans, 0 angle, D16300 command]
[Ingest 13:26:39 INFO] Sending XML status message
[Status 13:26:39 INFO] Mirror angle: 0
[Mirror 13:26:39 INFO] rotating to position S
[Status 13:26:40 INFO] .SET file for ACQ96 ready
[Ingest 13:26:40 INFO] Starting acquisition
[Status 13:26:41 INFO] reading housekeeping
[Status 13:26:59 INFO] acquire complete
[Status 13:27:00 INFO] writing housekeeping
[Sequencer 13:27:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:27:00 INFO] incremented S scene to 244 completed views
[Sequencer 13:27:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:27:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:27:00 INFO] incremented to [AERI set: name T244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:27:00 INFO] S244.SIG(18)
[sigmove 13:27:00 DEBUG] transformed S244Ma.SPC -> S244MA.SPC
[sigmove 13:27:00 DEBUG] transformed S244Mb.SPC -> S244MB.SPC
[sigmove 13:27:00 DEBUG] transformed S244Mc.SPC -> S244MC.SPC
[sigmove 13:27:00 DEBUG] transformed S244Md.SPC -> S244MD.SPC
[sigmove 13:27:00 DEBUG] transformed S244Me.SPC -> S244ME.SPC
[sigmove 13:27:00 DEBUG] transformed S244Mf.SPC -> S244MF.SPC
[Status 13:27:00 INFO] data for S244 transferred to science data processing
[Tidy 13:27:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:27:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:27:00 INFO] resetting WatchDogTimer
[Status 13:27:00 INFO] Starting Set [AERI set: name T244, 6 scans, 0 angle, D16300 command]
[Ingest 13:27:00 INFO] Sending XML status message
[Status 13:27:00 INFO] Mirror angle: 0
[Mirror 13:27:00 INFO] rotating to position T
[Status 13:27:01 INFO] .SET file for ACQ96 ready
[Ingest 13:27:01 INFO] Starting acquisition
[Status 13:27:01 INFO] reading housekeeping
[Status 13:27:19 INFO] acquire complete
[Status 13:27:20 INFO] writing housekeeping
[Sequencer 13:27:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:27:20 INFO] incremented T scene to 244 completed views
[Sequencer 13:27:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:27:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:27:20 INFO] incremented to [AERI set: name U244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:27:20 INFO] T244.SIG(18)
[sigmove 13:27:20 DEBUG] transformed T244Ma.SPC -> T244MA.SPC
[sigmove 13:27:20 DEBUG] transformed T244Mb.SPC -> T244MB.SPC
[sigmove 13:27:20 DEBUG] transformed T244Mc.SPC -> T244MC.SPC
[sigmove 13:27:20 DEBUG] transformed T244Md.SPC -> T244MD.SPC
[sigmove 13:27:20 DEBUG] transformed T244Me.SPC -> T244ME.SPC
[sigmove 13:27:20 DEBUG] transformed T244Mf.SPC -> T244MF.SPC
[Status 13:27:20 INFO] data for T244 transferred to science data processing
[Tidy 13:27:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:27:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:27:20 INFO] resetting WatchDogTimer
[Status 13:27:21 INFO] Starting Set [AERI set: name U244, 6 scans, 0 angle, D16300 command]
[Ingest 13:27:21 INFO] Sending XML status message
[Status 13:27:21 INFO] Mirror angle: 0
[Mirror 13:27:21 INFO] rotating to position U
[Status 13:27:22 INFO] .SET file for ACQ96 ready
[Ingest 13:27:22 INFO] Starting acquisition
[Status 13:27:22 INFO] reading housekeeping
[Status 13:27:40 INFO] acquire complete
[Status 13:27:41 INFO] writing housekeeping
[Sequencer 13:27:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:27:41 INFO] incremented U scene to 244 completed views
[Sequencer 13:27:41 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:27:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:27:41 INFO] incremented to [AERI set: name V244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:27:41 INFO] U244.SIG(18)
[sigmove 13:27:41 DEBUG] transformed U244Ma.SPC -> U244MA.SPC
[sigmove 13:27:41 DEBUG] transformed U244Mb.SPC -> U244MB.SPC
[sigmove 13:27:41 DEBUG] transformed U244Mc.SPC -> U244MC.SPC
[sigmove 13:27:41 DEBUG] transformed U244Md.SPC -> U244MD.SPC
[sigmove 13:27:41 DEBUG] transformed U244Me.SPC -> U244ME.SPC
[sigmove 13:27:41 DEBUG] transformed U244Mf.SPC -> U244MF.SPC
[Status 13:27:41 INFO] data for U244 transferred to science data processing
[Tidy 13:27:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:27:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:27:41 INFO] resetting WatchDogTimer
[Status 13:27:42 INFO] Starting Set [AERI set: name V244, 6 scans, 0 angle, D16300 command]
[Ingest 13:27:42 INFO] Sending XML status message
[Status 13:27:42 INFO] Mirror angle: 0
[Mirror 13:27:42 INFO] rotating to position V
[Status 13:27:42 INFO] .SET file for ACQ96 ready
[Ingest 13:27:43 INFO] Starting acquisition
[Status 13:27:43 INFO] reading housekeeping
[Status 13:28:01 INFO] acquire complete
[Status 13:28:01 INFO] writing housekeeping
[Sequencer 13:28:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:28:01 INFO] incremented V scene to 244 completed views
[Sequencer 13:28:01 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:28:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:28:01 INFO] incremented to [AERI set: name W244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:28:01 INFO] V244.SIG(18)
[sigmove 13:28:01 DEBUG] transformed V244Ma.SPC -> V244MA.SPC
[sigmove 13:28:01 DEBUG] transformed V244Mb.SPC -> V244MB.SPC
[sigmove 13:28:01 DEBUG] transformed V244Mc.SPC -> V244MC.SPC
[sigmove 13:28:01 DEBUG] transformed V244Md.SPC -> V244MD.SPC
[sigmove 13:28:01 DEBUG] transformed V244Me.SPC -> V244ME.SPC
[sigmove 13:28:01 DEBUG] transformed V244Mf.SPC -> V244MF.SPC
[Status 13:28:01 INFO] data for V244 transferred to science data processing
[Tidy 13:28:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:28:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:28:01 INFO] resetting WatchDogTimer
[Status 13:28:02 INFO] Starting Set [AERI set: name W244, 6 scans, 0 angle, D16300 command]
[Ingest 13:28:02 INFO] Sending XML status message
[Status 13:28:02 INFO] Mirror angle: 0
[Mirror 13:28:02 INFO] rotating to position W
[Status 13:28:02 INFO] .SET file for ACQ96 ready
[Ingest 13:28:03 INFO] Starting acquisition
[Status 13:28:03 INFO] reading housekeeping
[Status 13:28:21 INFO] acquire complete
[Status 13:28:22 INFO] writing housekeeping
[Sequencer 13:28:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:28:22 INFO] incremented W scene to 244 completed views
[Sequencer 13:28:22 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:28:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:28:22 INFO] incremented to [AERI set: name X244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:28:22 INFO] W244.SIG(18)
[sigmove 13:28:22 DEBUG] transformed W244Ma.SPC -> W244MA.SPC
[sigmove 13:28:22 DEBUG] transformed W244Mb.SPC -> W244MB.SPC
[sigmove 13:28:22 DEBUG] transformed W244Mc.SPC -> W244MC.SPC
[sigmove 13:28:22 DEBUG] transformed W244Md.SPC -> W244MD.SPC
[sigmove 13:28:22 DEBUG] transformed W244Me.SPC -> W244ME.SPC
[sigmove 13:28:22 DEBUG] transformed W244Mf.SPC -> W244MF.SPC
[Status 13:28:22 INFO] data for W244 transferred to science data processing
[Tidy 13:28:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:28:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:28:22 INFO] resetting WatchDogTimer
[Status 13:28:22 INFO] Starting Set [AERI set: name X244, 6 scans, 0 angle, D16300 command]
[Ingest 13:28:22 INFO] Sending XML status message
[Status 13:28:22 INFO] Mirror angle: 0
[Mirror 13:28:22 INFO] rotating to position X
[Status 13:28:23 INFO] .SET file for ACQ96 ready
[Ingest 13:28:23 INFO] Starting acquisition
[Status 13:28:23 INFO] reading housekeeping
[Status 13:28:41 INFO] acquire complete
[Status 13:28:42 INFO] writing housekeeping
[Sequencer 13:28:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:28:42 INFO] incremented X scene to 244 completed views
[Sequencer 13:28:42 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:28:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:28:42 INFO] incremented to [AERI set: name Y244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:28:42 INFO] X244.SIG(18)
[sigmove 13:28:42 DEBUG] transformed X244Ma.SPC -> X244MA.SPC
[sigmove 13:28:42 DEBUG] transformed X244Mb.SPC -> X244MB.SPC
[sigmove 13:28:42 DEBUG] transformed X244Mc.SPC -> X244MC.SPC
[sigmove 13:28:42 DEBUG] transformed X244Md.SPC -> X244MD.SPC
[sigmove 13:28:42 DEBUG] transformed X244Me.SPC -> X244ME.SPC
[sigmove 13:28:42 DEBUG] transformed X244Mf.SPC -> X244MF.SPC
[Status 13:28:42 INFO] data for X244 transferred to science data processing
[Tidy 13:28:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:28:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:28:42 INFO] resetting WatchDogTimer
[Status 13:28:42 INFO] Starting Set [AERI set: name Y244, 6 scans, 0 angle, D16300 command]
[Ingest 13:28:42 INFO] Sending XML status message
[Status 13:28:42 INFO] Mirror angle: 0
[Mirror 13:28:42 INFO] rotating to position Y
[Status 13:28:43 INFO] .SET file for ACQ96 ready
[Ingest 13:28:43 INFO] Starting acquisition
[Status 13:28:44 INFO] reading housekeeping
[Status 13:29:01 INFO] acquire complete
[Status 13:29:02 INFO] writing housekeeping
[Sequencer 13:29:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:29:02 INFO] incremented Y scene to 244 completed views
[Sequencer 13:29:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:29:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:29:02 INFO] incremented to [AERI set: name Z244, 6 scans, 0 angle, D16300 command] set
[sigmove 13:29:02 INFO] Y244.SIG(18)
[sigmove 13:29:02 DEBUG] transformed Y244Ma.SPC -> Y244MA.SPC
[sigmove 13:29:02 DEBUG] transformed Y244Mb.SPC -> Y244MB.SPC
[sigmove 13:29:02 DEBUG] transformed Y244Mc.SPC -> Y244MC.SPC
[sigmove 13:29:02 DEBUG] transformed Y244Md.SPC -> Y244MD.SPC
[sigmove 13:29:02 DEBUG] transformed Y244Me.SPC -> Y244ME.SPC
[sigmove 13:29:02 DEBUG] transformed Y244Mf.SPC -> Y244MF.SPC
[Status 13:29:02 INFO] data for Y244 transferred to science data processing
[Tidy 13:29:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:29:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:29:02 INFO] resetting WatchDogTimer
[Status 13:29:02 INFO] Starting Set [AERI set: name Z244, 6 scans, 0 angle, D16300 command]
[Ingest 13:29:02 INFO] Sending XML status message
[Status 13:29:02 INFO] Mirror angle: 0
[Mirror 13:29:03 INFO] rotating to position Z
[Status 13:29:03 INFO] .SET file for ACQ96 ready
[Ingest 13:29:03 INFO] Starting acquisition
[Status 13:29:04 INFO] reading housekeeping
[Status 13:29:21 INFO] acquire complete
[Status 13:29:22 INFO] writing housekeeping
[Sequencer 13:29:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:29:22 INFO] incremented Z scene to 244 completed views
[Sequencer 13:29:22 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:29:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:29:22 INFO] incremented to [AERI set: name H245, 6 scans, 60 angle, D22500 command] set
[sigmove 13:29:22 INFO] Z244.SIG(18)
[sigmove 13:29:22 DEBUG] transformed Z244Ma.SPC -> Z244MA.SPC
[sigmove 13:29:22 DEBUG] transformed Z244Mb.SPC -> Z244MB.SPC
[sigmove 13:29:22 DEBUG] transformed Z244Mc.SPC -> Z244MC.SPC
[sigmove 13:29:22 DEBUG] transformed Z244Md.SPC -> Z244MD.SPC
[sigmove 13:29:22 DEBUG] transformed Z244Me.SPC -> Z244ME.SPC
[sigmove 13:29:22 DEBUG] transformed Z244Mf.SPC -> Z244MF.SPC
[Status 13:29:22 INFO] data for Z244 transferred to science data processing
[Tidy 13:29:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:29:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:29:22 INFO] resetting WatchDogTimer
[Status 13:29:23 INFO] Starting Set [AERI set: name H245, 6 scans, 60 angle, D22500 command]
[Ingest 13:29:23 INFO] Sending XML status message
[Status 13:29:23 INFO] Mirror angle: 60
[Mirror 13:29:23 INFO] rotating to position H
[Status 13:29:24 INFO] .SET file for ACQ96 ready
[Ingest 13:29:24 INFO] Starting acquisition
[Status 13:29:24 INFO] reading housekeeping
[Status 13:29:43 INFO] acquire complete
[Status 13:29:44 INFO] writing housekeeping
[Sequencer 13:29:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:29:44 INFO] incremented H scene to 245 completed views
[Sequencer 13:29:44 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:29:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:29:44 INFO] incremented to [AERI set: name A245, 6 scans, 120 angle, D28300 command] set
[sigmove 13:29:44 INFO] H245.SIG(18)
[sigmove 13:29:44 DEBUG] transformed H245Ma.SPC -> H245MA.SPC
[sigmove 13:29:44 DEBUG] transformed H245Mb.SPC -> H245MB.SPC
[sigmove 13:29:44 DEBUG] transformed H245Mc.SPC -> H245MC.SPC
[sigmove 13:29:44 DEBUG] transformed H245Md.SPC -> H245MD.SPC
[sigmove 13:29:44 DEBUG] transformed H245Me.SPC -> H245ME.SPC
[sigmove 13:29:44 DEBUG] transformed H245Mf.SPC -> H245MF.SPC
[Status 13:29:44 INFO] data for H245 transferred to science data processing
[Tidy 13:29:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:29:44 INFO] A243.FIN(19),H243.FIN(19),S243.FIN(19),T243.FIN(19),U243.FIN(19),V243.FIN(19),W243.FIN(19),X243.FIN(19),Y243.FIN(19),Z243.FIN(19),A244.FIN(19),H244.FIN(19),S244.FIN(19),T244.FIN(19),U244.FIN(19),V244.FIN(19),W244.FIN(19),X244.FIN(19),Y244.FIN(19),Z244.FIN(19)
[sigmove 13:29:44 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:29:44 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:29:48 DEBUG] done zipping
[WatchDog 13:29:48 INFO] resetting WatchDogTimer
[Status 13:29:49 INFO] Starting Set [AERI set: name A245, 6 scans, 120 angle, D28300 command]
[Ingest 13:29:49 INFO] Sending XML status message
[Status 13:29:49 INFO] Mirror angle: 120
[Mirror 13:29:49 INFO] rotating to position A
[Status 13:29:50 INFO] .SET file for ACQ96 ready
[Ingest 13:29:50 INFO] Starting acquisition
[Status 13:29:50 INFO] reading housekeeping
[Status 13:30:08 INFO] acquire complete
[Status 13:30:09 INFO] writing housekeeping
[Sequencer 13:30:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:30:09 INFO] incremented A scene to 245 completed views
[Sequencer 13:30:09 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:30:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:30:09 INFO] incremented to [AERI set: name S245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:30:09 INFO] A245.SIG(18)
[sigmove 13:30:09 DEBUG] transformed A245Ma.SPC -> A245MA.SPC
[sigmove 13:30:09 DEBUG] transformed A245Mb.SPC -> A245MB.SPC
[sigmove 13:30:09 DEBUG] transformed A245Mc.SPC -> A245MC.SPC
[sigmove 13:30:09 DEBUG] transformed A245Md.SPC -> A245MD.SPC
[sigmove 13:30:09 DEBUG] transformed A245Me.SPC -> A245ME.SPC
[sigmove 13:30:09 DEBUG] transformed A245Mf.SPC -> A245MF.SPC
[Status 13:30:09 INFO] data for A245 transferred to science data processing
[Tidy 13:30:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:30:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:30:09 INFO] resetting WatchDogTimer
[Status 13:30:10 INFO] Starting Set [AERI set: name S245, 6 scans, 0 angle, D16300 command]
[Ingest 13:30:10 INFO] Sending XML status message
[Status 13:30:10 INFO] Mirror angle: 0
[Mirror 13:30:10 INFO] rotating to position S
[Status 13:30:11 INFO] .SET file for ACQ96 ready
[Ingest 13:30:12 INFO] Starting acquisition
[Status 13:30:12 INFO] reading housekeeping
[Status 13:30:30 INFO] acquire complete
[Status 13:30:31 INFO] writing housekeeping
[Sequencer 13:30:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:30:31 INFO] incremented S scene to 245 completed views
[Sequencer 13:30:31 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:30:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:30:31 INFO] incremented to [AERI set: name T245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:30:31 INFO] S245.SIG(18)
[sigmove 13:30:31 DEBUG] transformed S245Ma.SPC -> S245MA.SPC
[sigmove 13:30:31 DEBUG] transformed S245Mb.SPC -> S245MB.SPC
[sigmove 13:30:31 DEBUG] transformed S245Mc.SPC -> S245MC.SPC
[sigmove 13:30:31 DEBUG] transformed S245Md.SPC -> S245MD.SPC
[sigmove 13:30:31 DEBUG] transformed S245Me.SPC -> S245ME.SPC
[sigmove 13:30:31 DEBUG] transformed S245Mf.SPC -> S245MF.SPC
[Status 13:30:31 INFO] data for S245 transferred to science data processing
[Tidy 13:30:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:30:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:30:31 INFO] resetting WatchDogTimer
[Status 13:30:31 INFO] Starting Set [AERI set: name T245, 6 scans, 0 angle, D16300 command]
[Ingest 13:30:31 INFO] Sending XML status message
[Status 13:30:31 INFO] Mirror angle: 0
[Mirror 13:30:31 INFO] rotating to position T
[Status 13:30:32 INFO] .SET file for ACQ96 ready
[Ingest 13:30:32 INFO] Starting acquisition
[Status 13:30:32 INFO] reading housekeeping
[Status 13:30:50 INFO] acquire complete
[Status 13:30:51 INFO] writing housekeeping
[Sequencer 13:30:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:30:51 INFO] incremented T scene to 245 completed views
[Sequencer 13:30:51 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:30:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:30:51 INFO] incremented to [AERI set: name U245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:30:51 INFO] T245.SIG(18)
[sigmove 13:30:51 DEBUG] transformed T245Ma.SPC -> T245MA.SPC
[sigmove 13:30:51 DEBUG] transformed T245Mb.SPC -> T245MB.SPC
[sigmove 13:30:51 DEBUG] transformed T245Mc.SPC -> T245MC.SPC
[sigmove 13:30:51 DEBUG] transformed T245Md.SPC -> T245MD.SPC
[sigmove 13:30:51 DEBUG] transformed T245Me.SPC -> T245ME.SPC
[sigmove 13:30:51 DEBUG] transformed T245Mf.SPC -> T245MF.SPC
[Status 13:30:51 INFO] data for T245 transferred to science data processing
[Tidy 13:30:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:30:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:30:51 INFO] resetting WatchDogTimer
[Status 13:30:51 INFO] Starting Set [AERI set: name U245, 6 scans, 0 angle, D16300 command]
[Ingest 13:30:51 INFO] Sending XML status message
[Status 13:30:51 INFO] Mirror angle: 0
[Mirror 13:30:52 INFO] rotating to position U
[Status 13:30:53 INFO] .SET file for ACQ96 ready
[Ingest 13:30:53 INFO] Starting acquisition
[Status 13:30:53 INFO] reading housekeeping
[Status 13:31:11 INFO] acquire complete
[Status 13:31:13 INFO] writing housekeeping
[Sequencer 13:31:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:31:13 INFO] incremented U scene to 245 completed views
[Sequencer 13:31:13 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:31:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:31:13 INFO] incremented to [AERI set: name V245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:31:13 INFO] U245.SIG(18)
[sigmove 13:31:13 DEBUG] transformed U245Ma.SPC -> U245MA.SPC
[sigmove 13:31:13 DEBUG] transformed U245Mb.SPC -> U245MB.SPC
[sigmove 13:31:13 DEBUG] transformed U245Mc.SPC -> U245MC.SPC
[sigmove 13:31:13 DEBUG] transformed U245Md.SPC -> U245MD.SPC
[sigmove 13:31:13 DEBUG] transformed U245Me.SPC -> U245ME.SPC
[sigmove 13:31:13 DEBUG] transformed U245Mf.SPC -> U245MF.SPC
[Status 13:31:13 INFO] data for U245 transferred to science data processing
[Tidy 13:31:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:31:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:31:13 INFO] resetting WatchDogTimer
[Status 13:31:14 INFO] Starting Set [AERI set: name V245, 6 scans, 0 angle, D16300 command]
[Ingest 13:31:14 INFO] Sending XML status message
[Status 13:31:14 INFO] Mirror angle: 0
[Mirror 13:31:14 INFO] rotating to position V
[Status 13:31:15 INFO] .SET file for ACQ96 ready
[Ingest 13:31:15 INFO] Starting acquisition
[Status 13:31:15 INFO] reading housekeeping
[Status 13:31:33 INFO] acquire complete
[Status 13:31:33 INFO] writing housekeeping
[Sequencer 13:31:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:31:34 INFO] incremented V scene to 245 completed views
[Sequencer 13:31:34 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:31:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:31:34 INFO] incremented to [AERI set: name W245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:31:34 INFO] V245.SIG(18)
[sigmove 13:31:34 DEBUG] transformed V245Ma.SPC -> V245MA.SPC
[sigmove 13:31:34 DEBUG] transformed V245Mb.SPC -> V245MB.SPC
[sigmove 13:31:34 DEBUG] transformed V245Mc.SPC -> V245MC.SPC
[sigmove 13:31:34 DEBUG] transformed V245Md.SPC -> V245MD.SPC
[sigmove 13:31:34 DEBUG] transformed V245Me.SPC -> V245ME.SPC
[sigmove 13:31:34 DEBUG] transformed V245Mf.SPC -> V245MF.SPC
[Status 13:31:34 INFO] data for V245 transferred to science data processing
[Tidy 13:31:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:31:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:31:34 INFO] resetting WatchDogTimer
[Status 13:31:34 INFO] Starting Set [AERI set: name W245, 6 scans, 0 angle, D16300 command]
[Ingest 13:31:34 INFO] Sending XML status message
[Status 13:31:34 INFO] Mirror angle: 0
[Mirror 13:31:34 INFO] rotating to position W
[Status 13:31:35 INFO] .SET file for ACQ96 ready
[Ingest 13:31:35 INFO] Starting acquisition
[Status 13:31:35 INFO] reading housekeeping
[Status 13:31:53 INFO] acquire complete
[Status 13:31:54 INFO] writing housekeeping
[Sequencer 13:31:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:31:54 INFO] incremented W scene to 245 completed views
[Sequencer 13:31:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:31:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:31:54 INFO] incremented to [AERI set: name X245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:31:54 INFO] W245.SIG(18)
[sigmove 13:31:54 DEBUG] transformed W245Ma.SPC -> W245MA.SPC
[sigmove 13:31:54 DEBUG] transformed W245Mb.SPC -> W245MB.SPC
[sigmove 13:31:54 DEBUG] transformed W245Mc.SPC -> W245MC.SPC
[sigmove 13:31:54 DEBUG] transformed W245Md.SPC -> W245MD.SPC
[sigmove 13:31:54 DEBUG] transformed W245Me.SPC -> W245ME.SPC
[sigmove 13:31:54 DEBUG] transformed W245Mf.SPC -> W245MF.SPC
[Status 13:31:54 INFO] data for W245 transferred to science data processing
[Tidy 13:31:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:31:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:31:54 INFO] resetting WatchDogTimer
[Status 13:31:54 INFO] Starting Set [AERI set: name X245, 6 scans, 0 angle, D16300 command]
[Ingest 13:31:54 INFO] Sending XML status message
[Status 13:31:54 INFO] Mirror angle: 0
[Mirror 13:31:54 INFO] rotating to position X
[Status 13:31:55 INFO] .SET file for ACQ96 ready
[Ingest 13:31:55 INFO] Starting acquisition
[Status 13:31:55 INFO] reading housekeeping
[Status 13:32:13 INFO] acquire complete
[Status 13:32:14 INFO] writing housekeeping
[Sequencer 13:32:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:32:14 INFO] incremented X scene to 245 completed views
[Sequencer 13:32:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:32:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:32:14 INFO] incremented to [AERI set: name Y245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:32:14 INFO] X245.SIG(18)
[sigmove 13:32:14 DEBUG] transformed X245Ma.SPC -> X245MA.SPC
[sigmove 13:32:14 DEBUG] transformed X245Mb.SPC -> X245MB.SPC
[sigmove 13:32:14 DEBUG] transformed X245Mc.SPC -> X245MC.SPC
[sigmove 13:32:14 DEBUG] transformed X245Md.SPC -> X245MD.SPC
[sigmove 13:32:14 DEBUG] transformed X245Me.SPC -> X245ME.SPC
[sigmove 13:32:14 DEBUG] transformed X245Mf.SPC -> X245MF.SPC
[Status 13:32:14 INFO] data for X245 transferred to science data processing
[Tidy 13:32:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:32:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:32:14 INFO] resetting WatchDogTimer
[Status 13:32:14 INFO] Starting Set [AERI set: name Y245, 6 scans, 0 angle, D16300 command]
[Ingest 13:32:14 INFO] Sending XML status message
[Status 13:32:14 INFO] Mirror angle: 0
[Mirror 13:32:15 INFO] rotating to position Y
[Status 13:32:15 INFO] .SET file for ACQ96 ready
[Ingest 13:32:15 INFO] Starting acquisition
[Status 13:32:16 INFO] reading housekeeping
[Status 13:32:33 INFO] acquire complete
[Status 13:32:34 INFO] writing housekeeping
[Sequencer 13:32:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:32:34 INFO] incremented Y scene to 245 completed views
[Sequencer 13:32:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:32:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:32:34 INFO] incremented to [AERI set: name Z245, 6 scans, 0 angle, D16300 command] set
[sigmove 13:32:34 INFO] Y245.SIG(18)
[sigmove 13:32:34 DEBUG] transformed Y245Ma.SPC -> Y245MA.SPC
[sigmove 13:32:34 DEBUG] transformed Y245Mb.SPC -> Y245MB.SPC
[sigmove 13:32:34 DEBUG] transformed Y245Mc.SPC -> Y245MC.SPC
[sigmove 13:32:34 DEBUG] transformed Y245Md.SPC -> Y245MD.SPC
[sigmove 13:32:34 DEBUG] transformed Y245Me.SPC -> Y245ME.SPC
[sigmove 13:32:34 DEBUG] transformed Y245Mf.SPC -> Y245MF.SPC
[Status 13:32:34 INFO] data for Y245 transferred to science data processing
[Tidy 13:32:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:32:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:32:34 INFO] resetting WatchDogTimer
[Status 13:32:34 INFO] Starting Set [AERI set: name Z245, 6 scans, 0 angle, D16300 command]
[Ingest 13:32:34 INFO] Sending XML status message
[Status 13:32:34 INFO] Mirror angle: 0
[Mirror 13:32:35 INFO] rotating to position Z
[Status 13:32:35 INFO] .SET file for ACQ96 ready
[Ingest 13:32:35 INFO] Starting acquisition
[Status 13:32:36 INFO] reading housekeeping
[Status 13:32:53 INFO] acquire complete
[Status 13:32:54 INFO] writing housekeeping
[Sequencer 13:32:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:32:54 INFO] incremented Z scene to 245 completed views
[Sequencer 13:32:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:32:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:32:54 INFO] incremented to [AERI set: name A246, 6 scans, 120 angle, D28300 command] set
[sigmove 13:32:54 INFO] Z245.SIG(18)
[sigmove 13:32:54 DEBUG] transformed Z245Ma.SPC -> Z245MA.SPC
[sigmove 13:32:54 DEBUG] transformed Z245Mb.SPC -> Z245MB.SPC
[sigmove 13:32:54 DEBUG] transformed Z245Mc.SPC -> Z245MC.SPC
[sigmove 13:32:54 DEBUG] transformed Z245Md.SPC -> Z245MD.SPC
[sigmove 13:32:54 DEBUG] transformed Z245Me.SPC -> Z245ME.SPC
[sigmove 13:32:54 DEBUG] transformed Z245Mf.SPC -> Z245MF.SPC
[Status 13:32:54 INFO] data for Z245 transferred to science data processing
[Tidy 13:32:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:32:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:32:54 INFO] resetting WatchDogTimer
[Status 13:32:55 INFO] Starting Set [AERI set: name A246, 6 scans, 120 angle, D28300 command]
[Ingest 13:32:55 INFO] Sending XML status message
[Status 13:32:55 INFO] Mirror angle: 120
[Mirror 13:32:55 INFO] rotating to position A
[Status 13:32:56 INFO] .SET file for ACQ96 ready
[Ingest 13:32:57 INFO] Starting acquisition
[Status 13:32:57 INFO] reading housekeeping
[Status 13:33:19 INFO] acquire complete
[Status 13:33:20 INFO] writing housekeeping
[Sequencer 13:33:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:33:20 INFO] incremented A scene to 246 completed views
[Sequencer 13:33:20 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:33:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:33:20 INFO] incremented to [AERI set: name H246, 6 scans, 60 angle, D22500 command] set
[sigmove 13:33:20 INFO] A246.SIG(18)
[sigmove 13:33:20 DEBUG] transformed A246Ma.SPC -> A246MA.SPC
[sigmove 13:33:20 DEBUG] transformed A246Mb.SPC -> A246MB.SPC
[sigmove 13:33:20 DEBUG] transformed A246Mc.SPC -> A246MC.SPC
[sigmove 13:33:20 DEBUG] transformed A246Md.SPC -> A246MD.SPC
[sigmove 13:33:20 DEBUG] transformed A246Me.SPC -> A246ME.SPC
[sigmove 13:33:20 DEBUG] transformed A246Mf.SPC -> A246MF.SPC
[Status 13:33:20 INFO] data for A246 transferred to science data processing
[Tidy 13:33:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:33:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:33:20 INFO] resetting WatchDogTimer
[Status 13:33:20 INFO] Starting Set [AERI set: name H246, 6 scans, 60 angle, D22500 command]
[Ingest 13:33:20 INFO] Sending XML status message
[Status 13:33:20 INFO] Mirror angle: 60
[Mirror 13:33:21 INFO] rotating to position H
[Status 13:33:22 INFO] .SET file for ACQ96 ready
[Ingest 13:33:22 INFO] Starting acquisition
[Status 13:33:22 INFO] reading housekeeping
[Status 13:33:41 INFO] acquire complete
[Status 13:33:41 INFO] writing housekeeping
[Sequencer 13:33:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:33:41 INFO] incremented H scene to 246 completed views
[Sequencer 13:33:41 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:33:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:33:41 INFO] incremented to [AERI set: name S246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:33:41 INFO] H246.SIG(18)
[sigmove 13:33:41 DEBUG] transformed H246Ma.SPC -> H246MA.SPC
[sigmove 13:33:41 DEBUG] transformed H246Mb.SPC -> H246MB.SPC
[sigmove 13:33:41 DEBUG] transformed H246Mc.SPC -> H246MC.SPC
[sigmove 13:33:41 DEBUG] transformed H246Md.SPC -> H246MD.SPC
[sigmove 13:33:41 DEBUG] transformed H246Me.SPC -> H246ME.SPC
[sigmove 13:33:41 DEBUG] transformed H246Mf.SPC -> H246MF.SPC
[Status 13:33:41 INFO] data for H246 transferred to science data processing
[Tidy 13:33:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:33:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:33:41 INFO] resetting WatchDogTimer
[Status 13:33:42 INFO] Starting Set [AERI set: name S246, 6 scans, 0 angle, D16300 command]
[Ingest 13:33:42 INFO] Sending XML status message
[Status 13:33:42 INFO] Mirror angle: 0
[Mirror 13:33:42 INFO] rotating to position S
[Status 13:33:43 INFO] .SET file for ACQ96 ready
[Ingest 13:33:43 INFO] Starting acquisition
[Status 13:33:44 INFO] reading housekeeping
[Status 13:34:02 INFO] acquire complete
[Status 13:34:03 INFO] writing housekeeping
[Sequencer 13:34:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:34:03 INFO] incremented S scene to 246 completed views
[Sequencer 13:34:03 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:34:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:34:03 INFO] incremented to [AERI set: name T246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:34:03 INFO] S246.SIG(18)
[sigmove 13:34:03 DEBUG] transformed S246Ma.SPC -> S246MA.SPC
[sigmove 13:34:03 DEBUG] transformed S246Mb.SPC -> S246MB.SPC
[sigmove 13:34:03 DEBUG] transformed S246Mc.SPC -> S246MC.SPC
[sigmove 13:34:03 DEBUG] transformed S246Md.SPC -> S246MD.SPC
[sigmove 13:34:03 DEBUG] transformed S246Me.SPC -> S246ME.SPC
[sigmove 13:34:03 DEBUG] transformed S246Mf.SPC -> S246MF.SPC
[Status 13:34:03 INFO] data for S246 transferred to science data processing
[Tidy 13:34:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:34:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:34:03 INFO] resetting WatchDogTimer
[Status 13:34:03 INFO] Starting Set [AERI set: name T246, 6 scans, 0 angle, D16300 command]
[Ingest 13:34:03 INFO] Sending XML status message
[Status 13:34:03 INFO] Mirror angle: 0
[Mirror 13:34:04 INFO] rotating to position T
[Status 13:34:04 INFO] .SET file for ACQ96 ready
[Ingest 13:34:04 INFO] Starting acquisition
[Status 13:34:05 INFO] reading housekeeping
[Status 13:34:22 INFO] acquire complete
[Status 13:34:23 INFO] writing housekeeping
[Sequencer 13:34:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:34:23 INFO] incremented T scene to 246 completed views
[Sequencer 13:34:23 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:34:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:34:23 INFO] incremented to [AERI set: name U246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:34:23 INFO] T246.SIG(18)
[sigmove 13:34:23 DEBUG] transformed T246Ma.SPC -> T246MA.SPC
[sigmove 13:34:23 DEBUG] transformed T246Mb.SPC -> T246MB.SPC
[sigmove 13:34:23 DEBUG] transformed T246Mc.SPC -> T246MC.SPC
[sigmove 13:34:23 DEBUG] transformed T246Md.SPC -> T246MD.SPC
[sigmove 13:34:23 DEBUG] transformed T246Me.SPC -> T246ME.SPC
[sigmove 13:34:23 DEBUG] transformed T246Mf.SPC -> T246MF.SPC
[Status 13:34:23 INFO] data for T246 transferred to science data processing
[Tidy 13:34:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:34:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:34:23 INFO] resetting WatchDogTimer
[Status 13:34:23 INFO] Starting Set [AERI set: name U246, 6 scans, 0 angle, D16300 command]
[Ingest 13:34:23 INFO] Sending XML status message
[Status 13:34:23 INFO] Mirror angle: 0
[Mirror 13:34:24 INFO] rotating to position U
[Status 13:34:24 INFO] .SET file for ACQ96 ready
[Ingest 13:34:24 INFO] Starting acquisition
[Status 13:34:25 INFO] reading housekeeping
[Status 13:34:42 INFO] acquire complete
[Status 13:34:43 INFO] writing housekeeping
[Sequencer 13:34:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:34:43 INFO] incremented U scene to 246 completed views
[Sequencer 13:34:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:34:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:34:43 INFO] incremented to [AERI set: name V246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:34:43 INFO] U246.SIG(18)
[sigmove 13:34:43 DEBUG] transformed U246Ma.SPC -> U246MA.SPC
[sigmove 13:34:43 DEBUG] transformed U246Mb.SPC -> U246MB.SPC
[sigmove 13:34:43 DEBUG] transformed U246Mc.SPC -> U246MC.SPC
[sigmove 13:34:43 DEBUG] transformed U246Md.SPC -> U246MD.SPC
[sigmove 13:34:43 DEBUG] transformed U246Me.SPC -> U246ME.SPC
[sigmove 13:34:43 DEBUG] transformed U246Mf.SPC -> U246MF.SPC
[Status 13:34:43 INFO] data for U246 transferred to science data processing
[Tidy 13:34:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:34:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:34:43 INFO] resetting WatchDogTimer
[Status 13:34:43 INFO] Starting Set [AERI set: name V246, 6 scans, 0 angle, D16300 command]
[Ingest 13:34:43 INFO] Sending XML status message
[Status 13:34:43 INFO] Mirror angle: 0
[Mirror 13:34:44 INFO] rotating to position V
[Status 13:34:44 INFO] .SET file for ACQ96 ready
[Ingest 13:34:44 INFO] Starting acquisition
[Status 13:34:45 INFO] reading housekeeping
[Status 13:35:02 INFO] acquire complete
[Status 13:35:03 INFO] writing housekeeping
[Sequencer 13:35:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:35:03 INFO] incremented V scene to 246 completed views
[Sequencer 13:35:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:35:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:35:03 INFO] incremented to [AERI set: name W246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:35:03 INFO] V246.SIG(18)
[sigmove 13:35:03 DEBUG] transformed V246Ma.SPC -> V246MA.SPC
[sigmove 13:35:03 DEBUG] transformed V246Mb.SPC -> V246MB.SPC
[sigmove 13:35:03 DEBUG] transformed V246Mc.SPC -> V246MC.SPC
[sigmove 13:35:03 DEBUG] transformed V246Md.SPC -> V246MD.SPC
[sigmove 13:35:03 DEBUG] transformed V246Me.SPC -> V246ME.SPC
[sigmove 13:35:03 DEBUG] transformed V246Mf.SPC -> V246MF.SPC
[Status 13:35:03 INFO] data for V246 transferred to science data processing
[Tidy 13:35:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:35:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:35:03 INFO] resetting WatchDogTimer
[Status 13:35:04 INFO] Starting Set [AERI set: name W246, 6 scans, 0 angle, D16300 command]
[Ingest 13:35:04 INFO] Sending XML status message
[Status 13:35:04 INFO] Mirror angle: 0
[Mirror 13:35:04 INFO] rotating to position W
[Status 13:35:04 INFO] .SET file for ACQ96 ready
[Ingest 13:35:05 INFO] Starting acquisition
[Status 13:35:05 INFO] reading housekeeping
[Status 13:35:23 INFO] acquire complete
[Status 13:35:24 INFO] writing housekeeping
[Sequencer 13:35:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:35:24 INFO] incremented W scene to 246 completed views
[Sequencer 13:35:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:35:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:35:24 INFO] incremented to [AERI set: name X246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:35:24 INFO] W246.SIG(18)
[sigmove 13:35:24 DEBUG] transformed W246Ma.SPC -> W246MA.SPC
[sigmove 13:35:24 DEBUG] transformed W246Mb.SPC -> W246MB.SPC
[sigmove 13:35:24 DEBUG] transformed W246Mc.SPC -> W246MC.SPC
[sigmove 13:35:24 DEBUG] transformed W246Md.SPC -> W246MD.SPC
[sigmove 13:35:24 DEBUG] transformed W246Me.SPC -> W246ME.SPC
[sigmove 13:35:24 DEBUG] transformed W246Mf.SPC -> W246MF.SPC
[Status 13:35:24 INFO] data for W246 transferred to science data processing
[Tidy 13:35:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:35:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:35:24 INFO] resetting WatchDogTimer
[Status 13:35:24 INFO] Starting Set [AERI set: name X246, 6 scans, 0 angle, D16300 command]
[Ingest 13:35:24 INFO] Sending XML status message
[Status 13:35:24 INFO] Mirror angle: 0
[Mirror 13:35:24 INFO] rotating to position X
[Status 13:35:25 INFO] .SET file for ACQ96 ready
[Ingest 13:35:26 INFO] Starting acquisition
[Status 13:35:27 INFO] reading housekeeping
[Status 13:35:44 INFO] acquire complete
[Status 13:35:45 INFO] writing housekeeping
[Sequencer 13:35:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:35:45 INFO] incremented X scene to 246 completed views
[Sequencer 13:35:45 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:35:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:35:45 INFO] incremented to [AERI set: name Y246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:35:45 INFO] X246.SIG(18)
[sigmove 13:35:45 DEBUG] transformed X246Ma.SPC -> X246MA.SPC
[sigmove 13:35:45 DEBUG] transformed X246Mb.SPC -> X246MB.SPC
[sigmove 13:35:45 DEBUG] transformed X246Mc.SPC -> X246MC.SPC
[sigmove 13:35:45 DEBUG] transformed X246Md.SPC -> X246MD.SPC
[sigmove 13:35:45 DEBUG] transformed X246Me.SPC -> X246ME.SPC
[sigmove 13:35:45 DEBUG] transformed X246Mf.SPC -> X246MF.SPC
[Status 13:35:45 INFO] data for X246 transferred to science data processing
[Tidy 13:35:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:35:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:35:45 INFO] resetting WatchDogTimer
[Status 13:35:45 INFO] Starting Set [AERI set: name Y246, 6 scans, 0 angle, D16300 command]
[Ingest 13:35:45 INFO] Sending XML status message
[Status 13:35:45 INFO] Mirror angle: 0
[Mirror 13:35:45 INFO] rotating to position Y
[Status 13:35:46 INFO] .SET file for ACQ96 ready
[Ingest 13:35:46 INFO] Starting acquisition
[Status 13:35:47 INFO] reading housekeeping
[Status 13:36:04 INFO] acquire complete
[Status 13:36:05 INFO] writing housekeeping
[Sequencer 13:36:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:36:05 INFO] incremented Y scene to 246 completed views
[Sequencer 13:36:05 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:36:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:36:05 INFO] incremented to [AERI set: name Z246, 6 scans, 0 angle, D16300 command] set
[sigmove 13:36:05 INFO] Y246.SIG(18)
[sigmove 13:36:05 DEBUG] transformed Y246Ma.SPC -> Y246MA.SPC
[sigmove 13:36:05 DEBUG] transformed Y246Mb.SPC -> Y246MB.SPC
[sigmove 13:36:05 DEBUG] transformed Y246Mc.SPC -> Y246MC.SPC
[sigmove 13:36:05 DEBUG] transformed Y246Md.SPC -> Y246MD.SPC
[sigmove 13:36:05 DEBUG] transformed Y246Me.SPC -> Y246ME.SPC
[sigmove 13:36:05 DEBUG] transformed Y246Mf.SPC -> Y246MF.SPC
[Status 13:36:05 INFO] data for Y246 transferred to science data processing
[Tidy 13:36:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:36:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:36:05 INFO] resetting WatchDogTimer
[Status 13:36:05 INFO] Starting Set [AERI set: name Z246, 6 scans, 0 angle, D16300 command]
[Ingest 13:36:05 INFO] Sending XML status message
[Status 13:36:05 INFO] Mirror angle: 0
[Mirror 13:36:06 INFO] rotating to position Z
[Status 13:36:06 INFO] .SET file for ACQ96 ready
[Ingest 13:36:06 INFO] Starting acquisition
[Status 13:36:07 INFO] reading housekeeping
[Status 13:36:24 INFO] acquire complete
[Status 13:36:25 INFO] writing housekeeping
[Sequencer 13:36:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:36:25 INFO] incremented Z scene to 246 completed views
[Sequencer 13:36:25 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:36:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:36:25 INFO] incremented to [AERI set: name H247, 6 scans, 60 angle, D22500 command] set
[sigmove 13:36:25 INFO] Z246.SIG(18)
[sigmove 13:36:25 DEBUG] transformed Z246Ma.SPC -> Z246MA.SPC
[sigmove 13:36:25 DEBUG] transformed Z246Mb.SPC -> Z246MB.SPC
[sigmove 13:36:25 DEBUG] transformed Z246Mc.SPC -> Z246MC.SPC
[sigmove 13:36:25 DEBUG] transformed Z246Md.SPC -> Z246MD.SPC
[sigmove 13:36:25 DEBUG] transformed Z246Me.SPC -> Z246ME.SPC
[sigmove 13:36:25 DEBUG] transformed Z246Mf.SPC -> Z246MF.SPC
[Status 13:36:25 INFO] data for Z246 transferred to science data processing
[Tidy 13:36:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:36:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:36:25 INFO] resetting WatchDogTimer
[Status 13:36:26 INFO] Starting Set [AERI set: name H247, 6 scans, 60 angle, D22500 command]
[Ingest 13:36:26 INFO] Sending XML status message
[Status 13:36:26 INFO] Mirror angle: 60
[Mirror 13:36:26 INFO] rotating to position H
[Status 13:36:27 INFO] .SET file for ACQ96 ready
[Ingest 13:36:27 INFO] Starting acquisition
[Status 13:36:27 INFO] reading housekeeping
[Status 13:36:46 INFO] acquire complete
[Status 13:36:47 INFO] writing housekeeping
[Sequencer 13:36:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:36:47 INFO] incremented H scene to 247 completed views
[Sequencer 13:36:47 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:36:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:36:47 INFO] incremented to [AERI set: name A247, 6 scans, 120 angle, D28300 command] set
[sigmove 13:36:47 INFO] H247.SIG(18)
[sigmove 13:36:47 DEBUG] transformed H247Ma.SPC -> H247MA.SPC
[sigmove 13:36:47 DEBUG] transformed H247Mb.SPC -> H247MB.SPC
[sigmove 13:36:47 DEBUG] transformed H247Mc.SPC -> H247MC.SPC
[sigmove 13:36:47 DEBUG] transformed H247Md.SPC -> H247MD.SPC
[sigmove 13:36:47 DEBUG] transformed H247Me.SPC -> H247ME.SPC
[sigmove 13:36:47 DEBUG] transformed H247Mf.SPC -> H247MF.SPC
[Status 13:36:47 INFO] data for H247 transferred to science data processing
[Tidy 13:36:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:36:47 INFO] A245.FIN(19),H245.FIN(19),S245.FIN(19),T245.FIN(19),U245.FIN(19),V245.FIN(19),W245.FIN(19),X245.FIN(19),Y245.FIN(19),Z245.FIN(19),A246.FIN(19),H246.FIN(19),S246.FIN(19),T246.FIN(19),U246.FIN(19),V246.FIN(19),W246.FIN(19),X246.FIN(19),Y246.FIN(19),Z246.FIN(19)
[sigmove 13:36:47 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:36:47 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:36:51 DEBUG] done zipping
[WatchDog 13:36:51 INFO] resetting WatchDogTimer
[Status 13:36:52 INFO] Starting Set [AERI set: name A247, 6 scans, 120 angle, D28300 command]
[Ingest 13:36:52 INFO] Sending XML status message
[Status 13:36:52 INFO] Mirror angle: 120
[Mirror 13:36:52 INFO] rotating to position A
[Status 13:36:53 INFO] .SET file for ACQ96 ready
[Ingest 13:36:53 INFO] Starting acquisition
[Status 13:36:54 INFO] reading housekeeping
[Status 13:37:11 INFO] acquire complete
[Status 13:37:12 INFO] writing housekeeping
[Sequencer 13:37:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:37:12 INFO] incremented A scene to 247 completed views
[Sequencer 13:37:12 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:37:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:37:12 INFO] incremented to [AERI set: name S247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:37:12 INFO] A247.SIG(18)
[sigmove 13:37:12 DEBUG] transformed A247Ma.SPC -> A247MA.SPC
[sigmove 13:37:12 DEBUG] transformed A247Mb.SPC -> A247MB.SPC
[sigmove 13:37:12 DEBUG] transformed A247Mc.SPC -> A247MC.SPC
[sigmove 13:37:12 DEBUG] transformed A247Md.SPC -> A247MD.SPC
[sigmove 13:37:12 DEBUG] transformed A247Me.SPC -> A247ME.SPC
[sigmove 13:37:12 DEBUG] transformed A247Mf.SPC -> A247MF.SPC
[Status 13:37:12 INFO] data for A247 transferred to science data processing
[Tidy 13:37:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:37:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:37:12 INFO] resetting WatchDogTimer
[Status 13:37:13 INFO] Starting Set [AERI set: name S247, 6 scans, 0 angle, D16300 command]
[Ingest 13:37:13 INFO] Sending XML status message
[Status 13:37:13 INFO] Mirror angle: 0
[Mirror 13:37:13 INFO] rotating to position S
[Status 13:37:14 INFO] .SET file for ACQ96 ready
[Ingest 13:37:15 INFO] Starting acquisition
[Status 13:37:15 INFO] reading housekeeping
[Status 13:37:33 INFO] acquire complete
[Status 13:37:34 INFO] writing housekeeping
[Sequencer 13:37:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:37:34 INFO] incremented S scene to 247 completed views
[Sequencer 13:37:34 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:37:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:37:34 INFO] incremented to [AERI set: name T247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:37:34 INFO] S247.SIG(18)
[sigmove 13:37:34 DEBUG] transformed S247Ma.SPC -> S247MA.SPC
[sigmove 13:37:34 DEBUG] transformed S247Mb.SPC -> S247MB.SPC
[sigmove 13:37:34 DEBUG] transformed S247Mc.SPC -> S247MC.SPC
[sigmove 13:37:34 DEBUG] transformed S247Md.SPC -> S247MD.SPC
[sigmove 13:37:34 DEBUG] transformed S247Me.SPC -> S247ME.SPC
[sigmove 13:37:34 DEBUG] transformed S247Mf.SPC -> S247MF.SPC
[Status 13:37:34 INFO] data for S247 transferred to science data processing
[Tidy 13:37:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:37:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:37:34 INFO] resetting WatchDogTimer
[Status 13:37:34 INFO] Starting Set [AERI set: name T247, 6 scans, 0 angle, D16300 command]
[Ingest 13:37:34 INFO] Sending XML status message
[Status 13:37:34 INFO] Mirror angle: 0
[Mirror 13:37:34 INFO] rotating to position T
[Status 13:37:35 INFO] .SET file for ACQ96 ready
[Ingest 13:37:35 INFO] Starting acquisition
[Status 13:37:35 INFO] reading housekeeping
[Status 13:37:53 INFO] acquire complete
[Status 13:37:54 INFO] writing housekeeping
[Sequencer 13:37:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:37:54 INFO] incremented T scene to 247 completed views
[Sequencer 13:37:54 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:37:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:37:54 INFO] incremented to [AERI set: name U247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:37:54 INFO] T247.SIG(18)
[sigmove 13:37:54 DEBUG] transformed T247Ma.SPC -> T247MA.SPC
[sigmove 13:37:54 DEBUG] transformed T247Mb.SPC -> T247MB.SPC
[sigmove 13:37:54 DEBUG] transformed T247Mc.SPC -> T247MC.SPC
[sigmove 13:37:54 DEBUG] transformed T247Md.SPC -> T247MD.SPC
[sigmove 13:37:54 DEBUG] transformed T247Me.SPC -> T247ME.SPC
[sigmove 13:37:54 DEBUG] transformed T247Mf.SPC -> T247MF.SPC
[Status 13:37:54 INFO] data for T247 transferred to science data processing
[Tidy 13:37:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:37:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:37:54 INFO] resetting WatchDogTimer
[Status 13:37:54 INFO] Starting Set [AERI set: name U247, 6 scans, 0 angle, D16300 command]
[Ingest 13:37:54 INFO] Sending XML status message
[Status 13:37:54 INFO] Mirror angle: 0
[Mirror 13:37:55 INFO] rotating to position U
[Status 13:37:55 INFO] .SET file for ACQ96 ready
[Ingest 13:37:55 INFO] Starting acquisition
[Status 13:37:56 INFO] reading housekeeping
[Status 13:38:13 INFO] acquire complete
[Status 13:38:14 INFO] writing housekeeping
[Sequencer 13:38:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:38:14 INFO] incremented U scene to 247 completed views
[Sequencer 13:38:14 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:38:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:38:14 INFO] incremented to [AERI set: name V247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:38:14 INFO] U247.SIG(18)
[sigmove 13:38:14 DEBUG] transformed U247Ma.SPC -> U247MA.SPC
[sigmove 13:38:14 DEBUG] transformed U247Mb.SPC -> U247MB.SPC
[sigmove 13:38:14 DEBUG] transformed U247Mc.SPC -> U247MC.SPC
[sigmove 13:38:14 DEBUG] transformed U247Md.SPC -> U247MD.SPC
[sigmove 13:38:14 DEBUG] transformed U247Me.SPC -> U247ME.SPC
[sigmove 13:38:14 DEBUG] transformed U247Mf.SPC -> U247MF.SPC
[Status 13:38:14 INFO] data for U247 transferred to science data processing
[Tidy 13:38:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:38:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:38:14 INFO] resetting WatchDogTimer
[Status 13:38:14 INFO] Starting Set [AERI set: name V247, 6 scans, 0 angle, D16300 command]
[Ingest 13:38:14 INFO] Sending XML status message
[Status 13:38:14 INFO] Mirror angle: 0
[Mirror 13:38:15 INFO] rotating to position V
[Status 13:38:15 INFO] .SET file for ACQ96 ready
[Ingest 13:38:15 INFO] Starting acquisition
[Status 13:38:16 INFO] reading housekeeping
[Status 13:38:33 INFO] acquire complete
[Status 13:38:34 INFO] writing housekeeping
[Sequencer 13:38:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:38:34 INFO] incremented V scene to 247 completed views
[Sequencer 13:38:34 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:38:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:38:34 INFO] incremented to [AERI set: name W247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:38:34 INFO] V247.SIG(18)
[sigmove 13:38:34 DEBUG] transformed V247Ma.SPC -> V247MA.SPC
[sigmove 13:38:34 DEBUG] transformed V247Mb.SPC -> V247MB.SPC
[sigmove 13:38:34 DEBUG] transformed V247Mc.SPC -> V247MC.SPC
[sigmove 13:38:34 DEBUG] transformed V247Md.SPC -> V247MD.SPC
[sigmove 13:38:34 DEBUG] transformed V247Me.SPC -> V247ME.SPC
[sigmove 13:38:34 DEBUG] transformed V247Mf.SPC -> V247MF.SPC
[Status 13:38:34 INFO] data for V247 transferred to science data processing
[Tidy 13:38:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:38:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:38:34 INFO] resetting WatchDogTimer
[Status 13:38:35 INFO] Starting Set [AERI set: name W247, 6 scans, 0 angle, D16300 command]
[Ingest 13:38:35 INFO] Sending XML status message
[Status 13:38:35 INFO] Mirror angle: 0
[Mirror 13:38:35 INFO] rotating to position W
[Status 13:38:35 INFO] .SET file for ACQ96 ready
[Ingest 13:38:36 INFO] Starting acquisition
[Status 13:38:36 INFO] reading housekeeping
[Status 13:38:54 INFO] acquire complete
[Status 13:38:54 INFO] writing housekeeping
[Sequencer 13:38:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:38:54 INFO] incremented W scene to 247 completed views
[Sequencer 13:38:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:38:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:38:54 INFO] incremented to [AERI set: name X247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:38:54 INFO] W247.SIG(18)
[sigmove 13:38:54 DEBUG] transformed W247Ma.SPC -> W247MA.SPC
[sigmove 13:38:54 DEBUG] transformed W247Mb.SPC -> W247MB.SPC
[sigmove 13:38:54 DEBUG] transformed W247Mc.SPC -> W247MC.SPC
[sigmove 13:38:54 DEBUG] transformed W247Md.SPC -> W247MD.SPC
[sigmove 13:38:54 DEBUG] transformed W247Me.SPC -> W247ME.SPC
[sigmove 13:38:54 DEBUG] transformed W247Mf.SPC -> W247MF.SPC
[Status 13:38:54 INFO] data for W247 transferred to science data processing
[Tidy 13:38:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:38:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:38:54 INFO] resetting WatchDogTimer
[Status 13:38:55 INFO] Starting Set [AERI set: name X247, 6 scans, 0 angle, D16300 command]
[Ingest 13:38:55 INFO] Sending XML status message
[Status 13:38:55 INFO] Mirror angle: 0
[Mirror 13:38:55 INFO] rotating to position X
[Status 13:38:56 INFO] .SET file for ACQ96 ready
[Ingest 13:38:56 INFO] Starting acquisition
[Status 13:38:56 INFO] reading housekeeping
[Status 13:39:14 INFO] acquire complete
[Status 13:39:15 INFO] writing housekeeping
[Sequencer 13:39:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:39:15 INFO] incremented X scene to 247 completed views
[Sequencer 13:39:15 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:39:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:39:15 INFO] incremented to [AERI set: name Y247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:39:15 INFO] X247.SIG(18)
[sigmove 13:39:15 DEBUG] transformed X247Ma.SPC -> X247MA.SPC
[sigmove 13:39:15 DEBUG] transformed X247Mb.SPC -> X247MB.SPC
[sigmove 13:39:15 DEBUG] transformed X247Mc.SPC -> X247MC.SPC
[sigmove 13:39:15 DEBUG] transformed X247Md.SPC -> X247MD.SPC
[sigmove 13:39:15 DEBUG] transformed X247Me.SPC -> X247ME.SPC
[sigmove 13:39:15 DEBUG] transformed X247Mf.SPC -> X247MF.SPC
[Status 13:39:15 INFO] data for X247 transferred to science data processing
[Tidy 13:39:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:39:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:39:15 INFO] resetting WatchDogTimer
[Status 13:39:15 INFO] Starting Set [AERI set: name Y247, 6 scans, 0 angle, D16300 command]
[Ingest 13:39:15 INFO] Sending XML status message
[Status 13:39:15 INFO] Mirror angle: 0
[Mirror 13:39:15 INFO] rotating to position Y
[Status 13:39:16 INFO] .SET file for ACQ96 ready
[Ingest 13:39:16 INFO] Starting acquisition
[Status 13:39:16 INFO] reading housekeeping
[Status 13:39:34 INFO] acquire complete
[Status 13:39:35 INFO] writing housekeeping
[Sequencer 13:39:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:39:35 INFO] incremented Y scene to 247 completed views
[Sequencer 13:39:35 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:39:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:39:35 INFO] incremented to [AERI set: name Z247, 6 scans, 0 angle, D16300 command] set
[sigmove 13:39:35 INFO] Y247.SIG(18)
[sigmove 13:39:35 DEBUG] transformed Y247Ma.SPC -> Y247MA.SPC
[sigmove 13:39:35 DEBUG] transformed Y247Mb.SPC -> Y247MB.SPC
[sigmove 13:39:35 DEBUG] transformed Y247Mc.SPC -> Y247MC.SPC
[sigmove 13:39:35 DEBUG] transformed Y247Md.SPC -> Y247MD.SPC
[sigmove 13:39:35 DEBUG] transformed Y247Me.SPC -> Y247ME.SPC
[sigmove 13:39:35 DEBUG] transformed Y247Mf.SPC -> Y247MF.SPC
[Status 13:39:35 INFO] data for Y247 transferred to science data processing
[Tidy 13:39:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:39:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:39:35 INFO] resetting WatchDogTimer
[Status 13:39:35 INFO] Starting Set [AERI set: name Z247, 6 scans, 0 angle, D16300 command]
[Ingest 13:39:35 INFO] Sending XML status message
[Status 13:39:35 INFO] Mirror angle: 0
[Mirror 13:39:35 INFO] rotating to position Z
[Status 13:39:36 INFO] .SET file for ACQ96 ready
[Ingest 13:39:36 INFO] Starting acquisition
[Status 13:39:37 INFO] reading housekeeping
[Status 13:39:54 INFO] acquire complete
[Status 13:39:55 INFO] writing housekeeping
[Sequencer 13:39:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:39:55 INFO] incremented Z scene to 247 completed views
[Sequencer 13:39:55 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:39:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:39:55 INFO] incremented to [AERI set: name A248, 6 scans, 120 angle, D28300 command] set
[sigmove 13:39:55 INFO] Z247.SIG(18)
[sigmove 13:39:55 DEBUG] transformed Z247Ma.SPC -> Z247MA.SPC
[sigmove 13:39:55 DEBUG] transformed Z247Mb.SPC -> Z247MB.SPC
[sigmove 13:39:55 DEBUG] transformed Z247Mc.SPC -> Z247MC.SPC
[sigmove 13:39:55 DEBUG] transformed Z247Md.SPC -> Z247MD.SPC
[sigmove 13:39:55 DEBUG] transformed Z247Me.SPC -> Z247ME.SPC
[sigmove 13:39:55 DEBUG] transformed Z247Mf.SPC -> Z247MF.SPC
[Status 13:39:55 INFO] data for Z247 transferred to science data processing
[Tidy 13:39:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:39:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:39:55 INFO] resetting WatchDogTimer
[Status 13:39:55 INFO] Starting Set [AERI set: name A248, 6 scans, 120 angle, D28300 command]
[Ingest 13:39:55 INFO] Sending XML status message
[Status 13:39:55 INFO] Mirror angle: 120
[Mirror 13:39:56 INFO] rotating to position A
[Status 13:39:57 INFO] .SET file for ACQ96 ready
[Ingest 13:39:57 INFO] Starting acquisition
[Status 13:39:58 INFO] reading housekeeping
[Status 13:40:15 INFO] acquire complete
[Status 13:40:16 INFO] writing housekeeping
[Sequencer 13:40:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:40:16 INFO] incremented A scene to 248 completed views
[Sequencer 13:40:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:40:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:40:16 INFO] incremented to [AERI set: name H248, 6 scans, 60 angle, D22500 command] set
[sigmove 13:40:16 INFO] A248.SIG(18)
[sigmove 13:40:16 DEBUG] transformed A248Ma.SPC -> A248MA.SPC
[sigmove 13:40:16 DEBUG] transformed A248Mb.SPC -> A248MB.SPC
[sigmove 13:40:16 DEBUG] transformed A248Mc.SPC -> A248MC.SPC
[sigmove 13:40:16 DEBUG] transformed A248Md.SPC -> A248MD.SPC
[sigmove 13:40:16 DEBUG] transformed A248Me.SPC -> A248ME.SPC
[sigmove 13:40:16 DEBUG] transformed A248Mf.SPC -> A248MF.SPC
[Status 13:40:16 INFO] data for A248 transferred to science data processing
[Tidy 13:40:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:40:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:40:16 INFO] resetting WatchDogTimer
[Status 13:40:17 INFO] Starting Set [AERI set: name H248, 6 scans, 60 angle, D22500 command]
[Ingest 13:40:17 INFO] Sending XML status message
[Status 13:40:17 INFO] Mirror angle: 60
[Mirror 13:40:17 INFO] rotating to position H
[Status 13:40:18 INFO] .SET file for ACQ96 ready
[Ingest 13:40:18 INFO] Starting acquisition
[Status 13:40:19 INFO] reading housekeeping
[Status 13:40:37 INFO] acquire complete
[Status 13:40:38 INFO] writing housekeeping
[Sequencer 13:40:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:40:38 INFO] incremented H scene to 248 completed views
[Sequencer 13:40:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:40:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:40:38 INFO] incremented to [AERI set: name S248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:40:38 INFO] H248.SIG(18)
[sigmove 13:40:38 DEBUG] transformed H248Ma.SPC -> H248MA.SPC
[sigmove 13:40:38 DEBUG] transformed H248Mb.SPC -> H248MB.SPC
[sigmove 13:40:38 DEBUG] transformed H248Mc.SPC -> H248MC.SPC
[sigmove 13:40:38 DEBUG] transformed H248Md.SPC -> H248MD.SPC
[sigmove 13:40:38 DEBUG] transformed H248Me.SPC -> H248ME.SPC
[sigmove 13:40:38 DEBUG] transformed H248Mf.SPC -> H248MF.SPC
[Status 13:40:38 INFO] data for H248 transferred to science data processing
[Tidy 13:40:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:40:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:40:38 INFO] resetting WatchDogTimer
[Status 13:40:38 INFO] Starting Set [AERI set: name S248, 6 scans, 0 angle, D16300 command]
[Ingest 13:40:38 INFO] Sending XML status message
[Status 13:40:38 INFO] Mirror angle: 0
[Mirror 13:40:38 INFO] rotating to position S
[Status 13:40:39 INFO] .SET file for ACQ96 ready
[Ingest 13:40:40 INFO] Starting acquisition
[Status 13:40:40 INFO] reading housekeeping
[Status 13:40:58 INFO] acquire complete
[Status 13:40:59 INFO] writing housekeeping
[Sequencer 13:40:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:40:59 INFO] incremented S scene to 248 completed views
[Sequencer 13:40:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:40:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:40:59 INFO] incremented to [AERI set: name T248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:40:59 INFO] S248.SIG(18)
[sigmove 13:40:59 DEBUG] transformed S248Ma.SPC -> S248MA.SPC
[sigmove 13:40:59 DEBUG] transformed S248Mb.SPC -> S248MB.SPC
[sigmove 13:40:59 DEBUG] transformed S248Mc.SPC -> S248MC.SPC
[sigmove 13:40:59 DEBUG] transformed S248Md.SPC -> S248MD.SPC
[sigmove 13:40:59 DEBUG] transformed S248Me.SPC -> S248ME.SPC
[sigmove 13:40:59 DEBUG] transformed S248Mf.SPC -> S248MF.SPC
[Status 13:40:59 INFO] data for S248 transferred to science data processing
[Tidy 13:40:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:40:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:40:59 INFO] resetting WatchDogTimer
[Status 13:40:59 INFO] Starting Set [AERI set: name T248, 6 scans, 0 angle, D16300 command]
[Ingest 13:40:59 INFO] Sending XML status message
[Status 13:40:59 INFO] Mirror angle: 0
[Mirror 13:41:00 INFO] rotating to position T
[Status 13:41:00 INFO] .SET file for ACQ96 ready
[Ingest 13:41:00 INFO] Starting acquisition
[Status 13:41:01 INFO] reading housekeeping
[Status 13:41:18 INFO] acquire complete
[Status 13:41:19 INFO] writing housekeeping
[Sequencer 13:41:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:41:19 INFO] incremented T scene to 248 completed views
[Sequencer 13:41:19 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:41:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:41:19 INFO] incremented to [AERI set: name U248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:41:19 INFO] T248.SIG(18)
[sigmove 13:41:19 DEBUG] transformed T248Ma.SPC -> T248MA.SPC
[sigmove 13:41:19 DEBUG] transformed T248Mb.SPC -> T248MB.SPC
[sigmove 13:41:19 DEBUG] transformed T248Mc.SPC -> T248MC.SPC
[sigmove 13:41:19 DEBUG] transformed T248Md.SPC -> T248MD.SPC
[sigmove 13:41:19 DEBUG] transformed T248Me.SPC -> T248ME.SPC
[sigmove 13:41:19 DEBUG] transformed T248Mf.SPC -> T248MF.SPC
[Status 13:41:19 INFO] data for T248 transferred to science data processing
[Tidy 13:41:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:41:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:41:19 INFO] resetting WatchDogTimer
[Status 13:41:20 INFO] Starting Set [AERI set: name U248, 6 scans, 0 angle, D16300 command]
[Ingest 13:41:20 INFO] Sending XML status message
[Status 13:41:20 INFO] Mirror angle: 0
[Mirror 13:41:20 INFO] rotating to position U
[Status 13:41:20 INFO] .SET file for ACQ96 ready
[Ingest 13:41:21 INFO] Starting acquisition
[Status 13:41:21 INFO] reading housekeeping
[Status 13:41:38 INFO] acquire complete
[Status 13:41:39 INFO] writing housekeeping
[Sequencer 13:41:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:41:39 INFO] incremented U scene to 248 completed views
[Sequencer 13:41:39 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:41:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:41:39 INFO] incremented to [AERI set: name V248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:41:39 INFO] U248.SIG(18)
[sigmove 13:41:39 DEBUG] transformed U248Ma.SPC -> U248MA.SPC
[sigmove 13:41:39 DEBUG] transformed U248Mb.SPC -> U248MB.SPC
[sigmove 13:41:39 DEBUG] transformed U248Mc.SPC -> U248MC.SPC
[sigmove 13:41:39 DEBUG] transformed U248Md.SPC -> U248MD.SPC
[sigmove 13:41:39 DEBUG] transformed U248Me.SPC -> U248ME.SPC
[sigmove 13:41:39 DEBUG] transformed U248Mf.SPC -> U248MF.SPC
[Status 13:41:39 INFO] data for U248 transferred to science data processing
[Tidy 13:41:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:41:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:41:39 INFO] resetting WatchDogTimer
[Status 13:41:40 INFO] Starting Set [AERI set: name V248, 6 scans, 0 angle, D16300 command]
[Ingest 13:41:40 INFO] Sending XML status message
[Status 13:41:40 INFO] Mirror angle: 0
[Mirror 13:41:40 INFO] rotating to position V
[Status 13:41:40 INFO] .SET file for ACQ96 ready
[Ingest 13:41:41 INFO] Starting acquisition
[Status 13:41:41 INFO] reading housekeeping
[Status 13:41:59 INFO] acquire complete
[Status 13:42:00 INFO] writing housekeeping
[Sequencer 13:42:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:42:00 INFO] incremented V scene to 248 completed views
[Sequencer 13:42:00 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:42:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:42:00 INFO] incremented to [AERI set: name W248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:42:00 INFO] V248.SIG(18)
[sigmove 13:42:00 DEBUG] transformed V248Ma.SPC -> V248MA.SPC
[sigmove 13:42:00 DEBUG] transformed V248Mb.SPC -> V248MB.SPC
[sigmove 13:42:00 DEBUG] transformed V248Mc.SPC -> V248MC.SPC
[sigmove 13:42:00 DEBUG] transformed V248Md.SPC -> V248MD.SPC
[sigmove 13:42:00 DEBUG] transformed V248Me.SPC -> V248ME.SPC
[sigmove 13:42:00 DEBUG] transformed V248Mf.SPC -> V248MF.SPC
[Status 13:42:00 INFO] data for V248 transferred to science data processing
[Tidy 13:42:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:42:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:42:00 INFO] resetting WatchDogTimer
[Status 13:42:00 INFO] Starting Set [AERI set: name W248, 6 scans, 0 angle, D16300 command]
[Ingest 13:42:00 INFO] Sending XML status message
[Status 13:42:00 INFO] Mirror angle: 0
[Mirror 13:42:00 INFO] rotating to position W
[Status 13:42:01 INFO] .SET file for ACQ96 ready
[Ingest 13:42:01 INFO] Starting acquisition
[Status 13:42:01 INFO] reading housekeeping
[Status 13:42:19 INFO] acquire complete
[Status 13:42:20 INFO] writing housekeeping
[Sequencer 13:42:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:42:20 INFO] incremented W scene to 248 completed views
[Sequencer 13:42:20 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:42:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:42:20 INFO] incremented to [AERI set: name X248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:42:20 INFO] W248.SIG(18)
[sigmove 13:42:20 DEBUG] transformed W248Ma.SPC -> W248MA.SPC
[sigmove 13:42:20 DEBUG] transformed W248Mb.SPC -> W248MB.SPC
[sigmove 13:42:20 DEBUG] transformed W248Mc.SPC -> W248MC.SPC
[sigmove 13:42:20 DEBUG] transformed W248Md.SPC -> W248MD.SPC
[sigmove 13:42:20 DEBUG] transformed W248Me.SPC -> W248ME.SPC
[sigmove 13:42:20 DEBUG] transformed W248Mf.SPC -> W248MF.SPC
[Status 13:42:20 INFO] data for W248 transferred to science data processing
[Tidy 13:42:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:42:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:42:20 INFO] resetting WatchDogTimer
[Status 13:42:20 INFO] Starting Set [AERI set: name X248, 6 scans, 0 angle, D16300 command]
[Ingest 13:42:20 INFO] Sending XML status message
[Status 13:42:20 INFO] Mirror angle: 0
[Mirror 13:42:20 INFO] rotating to position X
[Status 13:42:21 INFO] .SET file for ACQ96 ready
[Ingest 13:42:21 INFO] Starting acquisition
[Status 13:42:21 INFO] reading housekeeping
[Status 13:42:39 INFO] acquire complete
[Status 13:42:40 INFO] writing housekeeping
[Sequencer 13:42:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:42:40 INFO] incremented X scene to 248 completed views
[Sequencer 13:42:40 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:42:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:42:40 INFO] incremented to [AERI set: name Y248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:42:40 INFO] X248.SIG(18)
[sigmove 13:42:40 DEBUG] transformed X248Ma.SPC -> X248MA.SPC
[sigmove 13:42:40 DEBUG] transformed X248Mb.SPC -> X248MB.SPC
[sigmove 13:42:40 DEBUG] transformed X248Mc.SPC -> X248MC.SPC
[sigmove 13:42:40 DEBUG] transformed X248Md.SPC -> X248MD.SPC
[sigmove 13:42:40 DEBUG] transformed X248Me.SPC -> X248ME.SPC
[sigmove 13:42:40 DEBUG] transformed X248Mf.SPC -> X248MF.SPC
[Status 13:42:40 INFO] data for X248 transferred to science data processing
[Tidy 13:42:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:42:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:42:40 INFO] resetting WatchDogTimer
[Status 13:42:40 INFO] Starting Set [AERI set: name Y248, 6 scans, 0 angle, D16300 command]
[Ingest 13:42:40 INFO] Sending XML status message
[Status 13:42:40 INFO] Mirror angle: 0
[Mirror 13:42:41 INFO] rotating to position Y
[Status 13:42:41 INFO] .SET file for ACQ96 ready
[Ingest 13:42:41 INFO] Starting acquisition
[Status 13:42:42 INFO] reading housekeeping
[Status 13:42:59 INFO] acquire complete
[Status 13:43:00 INFO] writing housekeeping
[Sequencer 13:43:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:43:00 INFO] incremented Y scene to 248 completed views
[Sequencer 13:43:00 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:43:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:43:00 INFO] incremented to [AERI set: name Z248, 6 scans, 0 angle, D16300 command] set
[sigmove 13:43:00 INFO] Y248.SIG(18)
[sigmove 13:43:00 DEBUG] transformed Y248Ma.SPC -> Y248MA.SPC
[sigmove 13:43:00 DEBUG] transformed Y248Mb.SPC -> Y248MB.SPC
[sigmove 13:43:00 DEBUG] transformed Y248Mc.SPC -> Y248MC.SPC
[sigmove 13:43:00 DEBUG] transformed Y248Md.SPC -> Y248MD.SPC
[sigmove 13:43:00 DEBUG] transformed Y248Me.SPC -> Y248ME.SPC
[sigmove 13:43:00 DEBUG] transformed Y248Mf.SPC -> Y248MF.SPC
[Status 13:43:00 INFO] data for Y248 transferred to science data processing
[Tidy 13:43:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:43:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:43:00 INFO] resetting WatchDogTimer
[Status 13:43:00 INFO] Starting Set [AERI set: name Z248, 6 scans, 0 angle, D16300 command]
[Ingest 13:43:00 INFO] Sending XML status message
[Status 13:43:00 INFO] Mirror angle: 0
[Mirror 13:43:01 INFO] rotating to position Z
[Status 13:43:01 INFO] .SET file for ACQ96 ready
[Ingest 13:43:01 INFO] Starting acquisition
[Status 13:43:02 INFO] reading housekeeping
[Status 13:43:19 INFO] acquire complete
[Status 13:43:20 INFO] writing housekeeping
[Sequencer 13:43:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:43:20 INFO] incremented Z scene to 248 completed views
[Sequencer 13:43:20 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:43:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:43:20 INFO] incremented to [AERI set: name H249, 6 scans, 60 angle, D22500 command] set
[sigmove 13:43:20 INFO] Z248.SIG(18)
[sigmove 13:43:20 DEBUG] transformed Z248Ma.SPC -> Z248MA.SPC
[sigmove 13:43:20 DEBUG] transformed Z248Mb.SPC -> Z248MB.SPC
[sigmove 13:43:20 DEBUG] transformed Z248Mc.SPC -> Z248MC.SPC
[sigmove 13:43:20 DEBUG] transformed Z248Md.SPC -> Z248MD.SPC
[sigmove 13:43:20 DEBUG] transformed Z248Me.SPC -> Z248ME.SPC
[sigmove 13:43:20 DEBUG] transformed Z248Mf.SPC -> Z248MF.SPC
[Status 13:43:20 INFO] data for Z248 transferred to science data processing
[Tidy 13:43:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:43:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:43:20 INFO] resetting WatchDogTimer
[Status 13:43:21 INFO] Starting Set [AERI set: name H249, 6 scans, 60 angle, D22500 command]
[Ingest 13:43:21 INFO] Sending XML status message
[Status 13:43:21 INFO] Mirror angle: 60
[Mirror 13:43:21 INFO] rotating to position H
[Status 13:43:22 INFO] .SET file for ACQ96 ready
[Ingest 13:43:22 INFO] Starting acquisition
[Status 13:43:23 INFO] reading housekeeping
[Status 13:43:41 INFO] acquire complete
[Status 13:43:42 INFO] writing housekeeping
[Sequencer 13:43:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:43:42 INFO] incremented H scene to 249 completed views
[Sequencer 13:43:42 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:43:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:43:42 INFO] incremented to [AERI set: name A249, 6 scans, 120 angle, D28300 command] set
[sigmove 13:43:42 INFO] H249.SIG(18)
[sigmove 13:43:42 DEBUG] transformed H249Ma.SPC -> H249MA.SPC
[sigmove 13:43:42 DEBUG] transformed H249Mb.SPC -> H249MB.SPC
[sigmove 13:43:42 DEBUG] transformed H249Mc.SPC -> H249MC.SPC
[sigmove 13:43:42 DEBUG] transformed H249Md.SPC -> H249MD.SPC
[sigmove 13:43:42 DEBUG] transformed H249Me.SPC -> H249ME.SPC
[sigmove 13:43:42 DEBUG] transformed H249Mf.SPC -> H249MF.SPC
[Status 13:43:42 INFO] data for H249 transferred to science data processing
[Tidy 13:43:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:43:42 INFO] A247.FIN(19),H247.FIN(19),S247.FIN(19),T247.FIN(19),U247.FIN(19),V247.FIN(19),W247.FIN(19),X247.FIN(19),Y247.FIN(19),Z247.FIN(19),A248.FIN(19),H248.FIN(19),S248.FIN(19),T248.FIN(19),U248.FIN(19),V248.FIN(19),W248.FIN(19),X248.FIN(19),Y248.FIN(19),Z248.FIN(19)
[sigmove 13:43:42 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:43:42 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:43:46 DEBUG] done zipping
[WatchDog 13:43:46 INFO] resetting WatchDogTimer
[Status 13:43:47 INFO] Starting Set [AERI set: name A249, 6 scans, 120 angle, D28300 command]
[Ingest 13:43:47 INFO] Sending XML status message
[Status 13:43:47 INFO] Mirror angle: 120
[Mirror 13:43:47 INFO] rotating to position A
[Status 13:43:48 INFO] .SET file for ACQ96 ready
[Ingest 13:43:48 INFO] Starting acquisition
[Status 13:43:49 INFO] reading housekeeping
[Status 13:44:07 INFO] acquire complete
[Status 13:44:07 INFO] writing housekeeping
[Sequencer 13:44:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:44:07 INFO] incremented A scene to 249 completed views
[Sequencer 13:44:07 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:44:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:44:07 INFO] incremented to [AERI set: name S249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:44:07 INFO] A249.SIG(18)
[sigmove 13:44:07 DEBUG] transformed A249Ma.SPC -> A249MA.SPC
[sigmove 13:44:07 DEBUG] transformed A249Mb.SPC -> A249MB.SPC
[sigmove 13:44:07 DEBUG] transformed A249Mc.SPC -> A249MC.SPC
[sigmove 13:44:07 DEBUG] transformed A249Md.SPC -> A249MD.SPC
[sigmove 13:44:07 DEBUG] transformed A249Me.SPC -> A249ME.SPC
[sigmove 13:44:07 DEBUG] transformed A249Mf.SPC -> A249MF.SPC
[Status 13:44:07 INFO] data for A249 transferred to science data processing
[Tidy 13:44:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:44:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:44:07 INFO] resetting WatchDogTimer
[Status 13:44:08 INFO] Starting Set [AERI set: name S249, 6 scans, 0 angle, D16300 command]
[Ingest 13:44:08 INFO] Sending XML status message
[Status 13:44:08 INFO] Mirror angle: 0
[Mirror 13:44:08 INFO] rotating to position S
[Status 13:44:10 INFO] .SET file for ACQ96 ready
[Ingest 13:44:10 INFO] Starting acquisition
[Status 13:44:10 INFO] reading housekeeping
[Status 13:44:28 INFO] acquire complete
[Status 13:44:29 INFO] writing housekeeping
[Sequencer 13:44:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:44:29 INFO] incremented S scene to 249 completed views
[Sequencer 13:44:29 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:44:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:44:29 INFO] incremented to [AERI set: name T249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:44:29 INFO] S249.SIG(18)
[sigmove 13:44:29 DEBUG] transformed S249Ma.SPC -> S249MA.SPC
[sigmove 13:44:29 DEBUG] transformed S249Mb.SPC -> S249MB.SPC
[sigmove 13:44:29 DEBUG] transformed S249Mc.SPC -> S249MC.SPC
[sigmove 13:44:29 DEBUG] transformed S249Md.SPC -> S249MD.SPC
[sigmove 13:44:29 DEBUG] transformed S249Me.SPC -> S249ME.SPC
[sigmove 13:44:29 DEBUG] transformed S249Mf.SPC -> S249MF.SPC
[Status 13:44:29 INFO] data for S249 transferred to science data processing
[Tidy 13:44:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:44:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:44:29 INFO] resetting WatchDogTimer
[Status 13:44:29 INFO] Starting Set [AERI set: name T249, 6 scans, 0 angle, D16300 command]
[Ingest 13:44:29 INFO] Sending XML status message
[Status 13:44:29 INFO] Mirror angle: 0
[Mirror 13:44:29 INFO] rotating to position T
[Status 13:44:30 INFO] .SET file for ACQ96 ready
[Ingest 13:44:30 INFO] Starting acquisition
[Status 13:44:31 INFO] reading housekeeping
[Status 13:44:48 INFO] acquire complete
[Status 13:44:49 INFO] writing housekeeping
[Sequencer 13:44:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:44:49 INFO] incremented T scene to 249 completed views
[Sequencer 13:44:49 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:44:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:44:49 INFO] incremented to [AERI set: name U249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:44:49 INFO] T249.SIG(18)
[sigmove 13:44:49 DEBUG] transformed T249Ma.SPC -> T249MA.SPC
[sigmove 13:44:49 DEBUG] transformed T249Mb.SPC -> T249MB.SPC
[sigmove 13:44:49 DEBUG] transformed T249Mc.SPC -> T249MC.SPC
[sigmove 13:44:49 DEBUG] transformed T249Md.SPC -> T249MD.SPC
[sigmove 13:44:49 DEBUG] transformed T249Me.SPC -> T249ME.SPC
[sigmove 13:44:49 DEBUG] transformed T249Mf.SPC -> T249MF.SPC
[Status 13:44:49 INFO] data for T249 transferred to science data processing
[Tidy 13:44:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:44:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:44:49 INFO] resetting WatchDogTimer
[Status 13:44:49 INFO] Starting Set [AERI set: name U249, 6 scans, 0 angle, D16300 command]
[Ingest 13:44:49 INFO] Sending XML status message
[Status 13:44:49 INFO] Mirror angle: 0
[Mirror 13:44:50 INFO] rotating to position U
[Status 13:44:50 INFO] .SET file for ACQ96 ready
[Ingest 13:44:50 INFO] Starting acquisition
[Status 13:44:51 INFO] reading housekeeping
[Status 13:45:08 INFO] acquire complete
[Status 13:45:11 INFO] writing housekeeping
[Sequencer 13:45:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:45:11 INFO] incremented U scene to 249 completed views
[Sequencer 13:45:11 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:45:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:45:11 INFO] incremented to [AERI set: name V249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:45:11 INFO] U249.SIG(18)
[sigmove 13:45:11 DEBUG] transformed U249Ma.SPC -> U249MA.SPC
[sigmove 13:45:11 DEBUG] transformed U249Mb.SPC -> U249MB.SPC
[sigmove 13:45:11 DEBUG] transformed U249Mc.SPC -> U249MC.SPC
[sigmove 13:45:11 DEBUG] transformed U249Md.SPC -> U249MD.SPC
[sigmove 13:45:11 DEBUG] transformed U249Me.SPC -> U249ME.SPC
[sigmove 13:45:11 DEBUG] transformed U249Mf.SPC -> U249MF.SPC
[Status 13:45:11 INFO] data for U249 transferred to science data processing
[Tidy 13:45:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:45:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:45:11 INFO] resetting WatchDogTimer
[Status 13:45:11 INFO] Starting Set [AERI set: name V249, 6 scans, 0 angle, D16300 command]
[Ingest 13:45:11 INFO] Sending XML status message
[Status 13:45:11 INFO] Mirror angle: 0
[Mirror 13:45:11 INFO] rotating to position V
[Status 13:45:12 INFO] .SET file for ACQ96 ready
[Ingest 13:45:12 INFO] Starting acquisition
[Status 13:45:12 INFO] reading housekeeping
[Status 13:45:30 INFO] acquire complete
[Status 13:45:30 INFO] writing housekeeping
[Sequencer 13:45:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:45:30 INFO] incremented V scene to 249 completed views
[Sequencer 13:45:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:45:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:45:30 INFO] incremented to [AERI set: name W249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:45:30 INFO] V249.SIG(18)
[sigmove 13:45:30 DEBUG] transformed V249Ma.SPC -> V249MA.SPC
[sigmove 13:45:30 DEBUG] transformed V249Mb.SPC -> V249MB.SPC
[sigmove 13:45:30 DEBUG] transformed V249Mc.SPC -> V249MC.SPC
[sigmove 13:45:30 DEBUG] transformed V249Md.SPC -> V249MD.SPC
[sigmove 13:45:30 DEBUG] transformed V249Me.SPC -> V249ME.SPC
[sigmove 13:45:30 DEBUG] transformed V249Mf.SPC -> V249MF.SPC
[Status 13:45:30 INFO] data for V249 transferred to science data processing
[Tidy 13:45:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:45:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:45:30 INFO] resetting WatchDogTimer
[Status 13:45:31 INFO] Starting Set [AERI set: name W249, 6 scans, 0 angle, D16300 command]
[Ingest 13:45:31 INFO] Sending XML status message
[Status 13:45:31 INFO] Mirror angle: 0
[Mirror 13:45:31 INFO] rotating to position W
[Status 13:45:32 INFO] .SET file for ACQ96 ready
[Ingest 13:45:32 INFO] Starting acquisition
[Status 13:45:32 INFO] reading housekeeping
[Status 13:45:50 INFO] acquire complete
[Status 13:45:51 INFO] writing housekeeping
[Sequencer 13:45:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:45:51 INFO] incremented W scene to 249 completed views
[Sequencer 13:45:51 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:45:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:45:51 INFO] incremented to [AERI set: name X249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:45:51 INFO] W249.SIG(18)
[sigmove 13:45:51 DEBUG] transformed W249Ma.SPC -> W249MA.SPC
[sigmove 13:45:51 DEBUG] transformed W249Mb.SPC -> W249MB.SPC
[sigmove 13:45:51 DEBUG] transformed W249Mc.SPC -> W249MC.SPC
[sigmove 13:45:51 DEBUG] transformed W249Md.SPC -> W249MD.SPC
[sigmove 13:45:51 DEBUG] transformed W249Me.SPC -> W249ME.SPC
[sigmove 13:45:51 DEBUG] transformed W249Mf.SPC -> W249MF.SPC
[Status 13:45:51 INFO] data for W249 transferred to science data processing
[Tidy 13:45:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:45:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:45:51 INFO] resetting WatchDogTimer
[Status 13:45:51 INFO] Starting Set [AERI set: name X249, 6 scans, 0 angle, D16300 command]
[Ingest 13:45:51 INFO] Sending XML status message
[Status 13:45:51 INFO] Mirror angle: 0
[Mirror 13:45:51 INFO] rotating to position X
[Status 13:45:52 INFO] .SET file for ACQ96 ready
[Ingest 13:45:52 INFO] Starting acquisition
[Status 13:45:52 INFO] reading housekeeping
[Status 13:46:10 INFO] acquire complete
[Status 13:46:11 INFO] writing housekeeping
[Sequencer 13:46:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:46:11 INFO] incremented X scene to 249 completed views
[Sequencer 13:46:11 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:46:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:46:11 INFO] incremented to [AERI set: name Y249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:46:11 INFO] X249.SIG(18)
[sigmove 13:46:11 DEBUG] transformed X249Ma.SPC -> X249MA.SPC
[sigmove 13:46:11 DEBUG] transformed X249Mb.SPC -> X249MB.SPC
[sigmove 13:46:11 DEBUG] transformed X249Mc.SPC -> X249MC.SPC
[sigmove 13:46:11 DEBUG] transformed X249Md.SPC -> X249MD.SPC
[sigmove 13:46:11 DEBUG] transformed X249Me.SPC -> X249ME.SPC
[sigmove 13:46:11 DEBUG] transformed X249Mf.SPC -> X249MF.SPC
[Status 13:46:11 INFO] data for X249 transferred to science data processing
[Tidy 13:46:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:46:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:46:11 INFO] resetting WatchDogTimer
[Status 13:46:11 INFO] Starting Set [AERI set: name Y249, 6 scans, 0 angle, D16300 command]
[Ingest 13:46:11 INFO] Sending XML status message
[Status 13:46:11 INFO] Mirror angle: 0
[Mirror 13:46:12 INFO] rotating to position Y
[Status 13:46:12 INFO] .SET file for ACQ96 ready
[Ingest 13:46:12 INFO] Starting acquisition
[Status 13:46:13 INFO] reading housekeeping
[Status 13:46:30 INFO] acquire complete
[Status 13:46:31 INFO] writing housekeeping
[Sequencer 13:46:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:46:31 INFO] incremented Y scene to 249 completed views
[Sequencer 13:46:31 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:46:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:46:31 INFO] incremented to [AERI set: name Z249, 6 scans, 0 angle, D16300 command] set
[sigmove 13:46:31 INFO] Y249.SIG(18)
[sigmove 13:46:31 DEBUG] transformed Y249Ma.SPC -> Y249MA.SPC
[sigmove 13:46:31 DEBUG] transformed Y249Mb.SPC -> Y249MB.SPC
[sigmove 13:46:31 DEBUG] transformed Y249Mc.SPC -> Y249MC.SPC
[sigmove 13:46:31 DEBUG] transformed Y249Md.SPC -> Y249MD.SPC
[sigmove 13:46:31 DEBUG] transformed Y249Me.SPC -> Y249ME.SPC
[sigmove 13:46:31 DEBUG] transformed Y249Mf.SPC -> Y249MF.SPC
[Status 13:46:31 INFO] data for Y249 transferred to science data processing
[Tidy 13:46:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:46:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:46:31 INFO] resetting WatchDogTimer
[Status 13:46:31 INFO] Starting Set [AERI set: name Z249, 6 scans, 0 angle, D16300 command]
[Ingest 13:46:31 INFO] Sending XML status message
[Status 13:46:31 INFO] Mirror angle: 0
[Mirror 13:46:32 INFO] rotating to position Z
[Status 13:46:32 INFO] .SET file for ACQ96 ready
[Ingest 13:46:32 INFO] Starting acquisition
[Status 13:46:33 INFO] reading housekeeping
[Status 13:46:50 INFO] acquire complete
[Status 13:46:51 INFO] writing housekeeping
[Sequencer 13:46:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:46:51 INFO] incremented Z scene to 249 completed views
[Sequencer 13:46:51 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:46:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:46:51 INFO] incremented to [AERI set: name A250, 6 scans, 120 angle, D28300 command] set
[sigmove 13:46:51 INFO] Z249.SIG(18)
[sigmove 13:46:51 DEBUG] transformed Z249Ma.SPC -> Z249MA.SPC
[sigmove 13:46:51 DEBUG] transformed Z249Mb.SPC -> Z249MB.SPC
[sigmove 13:46:51 DEBUG] transformed Z249Mc.SPC -> Z249MC.SPC
[sigmove 13:46:51 DEBUG] transformed Z249Md.SPC -> Z249MD.SPC
[sigmove 13:46:51 DEBUG] transformed Z249Me.SPC -> Z249ME.SPC
[sigmove 13:46:51 DEBUG] transformed Z249Mf.SPC -> Z249MF.SPC
[Status 13:46:51 INFO] data for Z249 transferred to science data processing
[Tidy 13:46:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:46:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:46:51 INFO] resetting WatchDogTimer
[Status 13:46:52 INFO] Starting Set [AERI set: name A250, 6 scans, 120 angle, D28300 command]
[Ingest 13:46:52 INFO] Sending XML status message
[Status 13:46:52 INFO] Mirror angle: 120
[Mirror 13:46:52 INFO] rotating to position A
[Status 13:46:53 INFO] .SET file for ACQ96 ready
[Ingest 13:46:54 INFO] Starting acquisition
[Status 13:46:54 INFO] reading housekeeping
[Status 13:47:12 INFO] acquire complete
[Status 13:47:13 INFO] writing housekeeping
[Sequencer 13:47:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:47:13 INFO] incremented A scene to 250 completed views
[Sequencer 13:47:13 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:47:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:47:13 INFO] incremented to [AERI set: name H250, 6 scans, 60 angle, D22500 command] set
[sigmove 13:47:13 INFO] A250.SIG(18)
[sigmove 13:47:13 DEBUG] transformed A250Ma.SPC -> A250MA.SPC
[sigmove 13:47:13 DEBUG] transformed A250Mb.SPC -> A250MB.SPC
[sigmove 13:47:13 DEBUG] transformed A250Mc.SPC -> A250MC.SPC
[sigmove 13:47:13 DEBUG] transformed A250Md.SPC -> A250MD.SPC
[sigmove 13:47:13 DEBUG] transformed A250Me.SPC -> A250ME.SPC
[sigmove 13:47:13 DEBUG] transformed A250Mf.SPC -> A250MF.SPC
[Status 13:47:13 INFO] data for A250 transferred to science data processing
[Tidy 13:47:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:47:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:47:13 INFO] resetting WatchDogTimer
[Status 13:47:13 INFO] Starting Set [AERI set: name H250, 6 scans, 60 angle, D22500 command]
[Ingest 13:47:13 INFO] Sending XML status message
[Status 13:47:13 INFO] Mirror angle: 60
[Mirror 13:47:13 INFO] rotating to position H
[Status 13:47:14 INFO] .SET file for ACQ96 ready
[Ingest 13:47:14 INFO] Starting acquisition
[Status 13:47:15 INFO] reading housekeeping
[Status 13:47:33 INFO] acquire complete
[Status 13:47:34 INFO] writing housekeeping
[Sequencer 13:47:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:47:34 INFO] incremented H scene to 250 completed views
[Sequencer 13:47:34 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:47:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:47:34 INFO] incremented to [AERI set: name S250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:47:34 INFO] H250.SIG(18)
[sigmove 13:47:34 DEBUG] transformed H250Ma.SPC -> H250MA.SPC
[sigmove 13:47:34 DEBUG] transformed H250Mb.SPC -> H250MB.SPC
[sigmove 13:47:34 DEBUG] transformed H250Mc.SPC -> H250MC.SPC
[sigmove 13:47:34 DEBUG] transformed H250Md.SPC -> H250MD.SPC
[sigmove 13:47:34 DEBUG] transformed H250Me.SPC -> H250ME.SPC
[sigmove 13:47:34 DEBUG] transformed H250Mf.SPC -> H250MF.SPC
[Status 13:47:34 INFO] data for H250 transferred to science data processing
[Tidy 13:47:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:47:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:47:34 INFO] resetting WatchDogTimer
[Status 13:47:34 INFO] Starting Set [AERI set: name S250, 6 scans, 0 angle, D16300 command]
[Ingest 13:47:34 INFO] Sending XML status message
[Status 13:47:34 INFO] Mirror angle: 0
[Mirror 13:47:35 INFO] rotating to position S
[Status 13:47:36 INFO] .SET file for ACQ96 ready
[Ingest 13:47:36 INFO] Starting acquisition
[Status 13:47:36 INFO] reading housekeeping
[Status 13:47:54 INFO] acquire complete
[Status 13:47:55 INFO] writing housekeeping
[Sequencer 13:47:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:47:55 INFO] incremented S scene to 250 completed views
[Sequencer 13:47:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:47:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:47:55 INFO] incremented to [AERI set: name T250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:47:55 INFO] S250.SIG(18)
[sigmove 13:47:55 DEBUG] transformed S250Ma.SPC -> S250MA.SPC
[sigmove 13:47:55 DEBUG] transformed S250Mb.SPC -> S250MB.SPC
[sigmove 13:47:55 DEBUG] transformed S250Mc.SPC -> S250MC.SPC
[sigmove 13:47:55 DEBUG] transformed S250Md.SPC -> S250MD.SPC
[sigmove 13:47:55 DEBUG] transformed S250Me.SPC -> S250ME.SPC
[sigmove 13:47:55 DEBUG] transformed S250Mf.SPC -> S250MF.SPC
[Status 13:47:55 INFO] data for S250 transferred to science data processing
[Tidy 13:47:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:47:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:47:55 INFO] resetting WatchDogTimer
[Status 13:47:56 INFO] Starting Set [AERI set: name T250, 6 scans, 0 angle, D16300 command]
[Ingest 13:47:56 INFO] Sending XML status message
[Status 13:47:56 INFO] Mirror angle: 0
[Mirror 13:47:56 INFO] rotating to position T
[Status 13:47:56 INFO] .SET file for ACQ96 ready
[Ingest 13:47:57 INFO] Starting acquisition
[Status 13:47:57 INFO] reading housekeeping
[Status 13:48:15 INFO] acquire complete
[Status 13:48:15 INFO] writing housekeeping
[Sequencer 13:48:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:48:15 INFO] incremented T scene to 250 completed views
[Sequencer 13:48:15 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:48:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:48:15 INFO] incremented to [AERI set: name U250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:48:15 INFO] T250.SIG(18)
[sigmove 13:48:15 DEBUG] transformed T250Ma.SPC -> T250MA.SPC
[sigmove 13:48:15 DEBUG] transformed T250Mb.SPC -> T250MB.SPC
[sigmove 13:48:15 DEBUG] transformed T250Mc.SPC -> T250MC.SPC
[sigmove 13:48:15 DEBUG] transformed T250Md.SPC -> T250MD.SPC
[sigmove 13:48:15 DEBUG] transformed T250Me.SPC -> T250ME.SPC
[sigmove 13:48:15 DEBUG] transformed T250Mf.SPC -> T250MF.SPC
[Status 13:48:15 INFO] data for T250 transferred to science data processing
[Tidy 13:48:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:48:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:48:15 INFO] resetting WatchDogTimer
[Status 13:48:16 INFO] Starting Set [AERI set: name U250, 6 scans, 0 angle, D16300 command]
[Ingest 13:48:16 INFO] Sending XML status message
[Status 13:48:16 INFO] Mirror angle: 0
[Mirror 13:48:16 INFO] rotating to position U
[Status 13:48:16 INFO] .SET file for ACQ96 ready
[Ingest 13:48:17 INFO] Starting acquisition
[Status 13:48:17 INFO] reading housekeeping
[Status 13:48:35 INFO] acquire complete
[Status 13:48:36 INFO] writing housekeeping
[Sequencer 13:48:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:48:36 INFO] incremented U scene to 250 completed views
[Sequencer 13:48:36 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:48:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:48:36 INFO] incremented to [AERI set: name V250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:48:36 INFO] U250.SIG(18)
[sigmove 13:48:36 DEBUG] transformed U250Ma.SPC -> U250MA.SPC
[sigmove 13:48:36 DEBUG] transformed U250Mb.SPC -> U250MB.SPC
[sigmove 13:48:36 DEBUG] transformed U250Mc.SPC -> U250MC.SPC
[sigmove 13:48:36 DEBUG] transformed U250Md.SPC -> U250MD.SPC
[sigmove 13:48:36 DEBUG] transformed U250Me.SPC -> U250ME.SPC
[sigmove 13:48:36 DEBUG] transformed U250Mf.SPC -> U250MF.SPC
[Status 13:48:36 INFO] data for U250 transferred to science data processing
[Tidy 13:48:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:48:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:48:36 INFO] resetting WatchDogTimer
[Status 13:48:36 INFO] Starting Set [AERI set: name V250, 6 scans, 0 angle, D16300 command]
[Ingest 13:48:36 INFO] Sending XML status message
[Status 13:48:36 INFO] Mirror angle: 0
[Mirror 13:48:36 INFO] rotating to position V
[Status 13:48:37 INFO] .SET file for ACQ96 ready
[Ingest 13:48:37 INFO] Starting acquisition
[Status 13:48:37 INFO] reading housekeeping
[Status 13:48:55 INFO] acquire complete
[Status 13:48:56 INFO] writing housekeeping
[Sequencer 13:48:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:48:56 INFO] incremented V scene to 250 completed views
[Sequencer 13:48:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:48:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:48:56 INFO] incremented to [AERI set: name W250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:48:56 INFO] V250.SIG(18)
[sigmove 13:48:56 DEBUG] transformed V250Ma.SPC -> V250MA.SPC
[sigmove 13:48:56 DEBUG] transformed V250Mb.SPC -> V250MB.SPC
[sigmove 13:48:56 DEBUG] transformed V250Mc.SPC -> V250MC.SPC
[sigmove 13:48:56 DEBUG] transformed V250Md.SPC -> V250MD.SPC
[sigmove 13:48:56 DEBUG] transformed V250Me.SPC -> V250ME.SPC
[sigmove 13:48:56 DEBUG] transformed V250Mf.SPC -> V250MF.SPC
[Status 13:48:56 INFO] data for V250 transferred to science data processing
[Tidy 13:48:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:48:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:48:56 INFO] resetting WatchDogTimer
[Status 13:48:56 INFO] Starting Set [AERI set: name W250, 6 scans, 0 angle, D16300 command]
[Ingest 13:48:56 INFO] Sending XML status message
[Status 13:48:56 INFO] Mirror angle: 0
[Mirror 13:48:56 INFO] rotating to position W
[Status 13:48:57 INFO] .SET file for ACQ96 ready
[Ingest 13:48:57 INFO] Starting acquisition
[Status 13:48:58 INFO] reading housekeeping
[Status 13:49:15 INFO] acquire complete
[Status 13:49:16 INFO] writing housekeeping
[Sequencer 13:49:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:49:16 INFO] incremented W scene to 250 completed views
[Sequencer 13:49:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:49:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:49:16 INFO] incremented to [AERI set: name X250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:49:16 INFO] W250.SIG(18)
[sigmove 13:49:16 DEBUG] transformed W250Ma.SPC -> W250MA.SPC
[sigmove 13:49:16 DEBUG] transformed W250Mb.SPC -> W250MB.SPC
[sigmove 13:49:16 DEBUG] transformed W250Mc.SPC -> W250MC.SPC
[sigmove 13:49:16 DEBUG] transformed W250Md.SPC -> W250MD.SPC
[sigmove 13:49:16 DEBUG] transformed W250Me.SPC -> W250ME.SPC
[sigmove 13:49:16 DEBUG] transformed W250Mf.SPC -> W250MF.SPC
[Status 13:49:16 INFO] data for W250 transferred to science data processing
[Tidy 13:49:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:49:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:49:16 INFO] resetting WatchDogTimer
[Status 13:49:16 INFO] Starting Set [AERI set: name X250, 6 scans, 0 angle, D16300 command]
[Ingest 13:49:16 INFO] Sending XML status message
[Status 13:49:16 INFO] Mirror angle: 0
[Mirror 13:49:17 INFO] rotating to position X
[Status 13:49:17 INFO] .SET file for ACQ96 ready
[Ingest 13:49:17 INFO] Starting acquisition
[Status 13:49:18 INFO] reading housekeeping
[Status 13:49:35 INFO] acquire complete
[Status 13:49:36 INFO] writing housekeeping
[Sequencer 13:49:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:49:36 INFO] incremented X scene to 250 completed views
[Sequencer 13:49:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:49:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:49:36 INFO] incremented to [AERI set: name Y250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:49:36 INFO] X250.SIG(18)
[sigmove 13:49:36 DEBUG] transformed X250Ma.SPC -> X250MA.SPC
[sigmove 13:49:36 DEBUG] transformed X250Mb.SPC -> X250MB.SPC
[sigmove 13:49:36 DEBUG] transformed X250Mc.SPC -> X250MC.SPC
[sigmove 13:49:36 DEBUG] transformed X250Md.SPC -> X250MD.SPC
[sigmove 13:49:36 DEBUG] transformed X250Me.SPC -> X250ME.SPC
[sigmove 13:49:36 DEBUG] transformed X250Mf.SPC -> X250MF.SPC
[Status 13:49:36 INFO] data for X250 transferred to science data processing
[Tidy 13:49:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:49:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:49:36 INFO] resetting WatchDogTimer
[Status 13:49:37 INFO] Starting Set [AERI set: name Y250, 6 scans, 0 angle, D16300 command]
[Ingest 13:49:37 INFO] Sending XML status message
[Status 13:49:37 INFO] Mirror angle: 0
[Mirror 13:49:37 INFO] rotating to position Y
[Status 13:49:37 INFO] .SET file for ACQ96 ready
[Ingest 13:49:38 INFO] Starting acquisition
[Status 13:49:38 INFO] reading housekeeping
[Status 13:49:56 INFO] acquire complete
[Status 13:49:56 INFO] writing housekeeping
[Sequencer 13:49:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:49:56 INFO] incremented Y scene to 250 completed views
[Sequencer 13:49:56 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:49:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:49:56 INFO] incremented to [AERI set: name Z250, 6 scans, 0 angle, D16300 command] set
[sigmove 13:49:56 INFO] Y250.SIG(18)
[sigmove 13:49:56 DEBUG] transformed Y250Ma.SPC -> Y250MA.SPC
[sigmove 13:49:56 DEBUG] transformed Y250Mb.SPC -> Y250MB.SPC
[sigmove 13:49:56 DEBUG] transformed Y250Mc.SPC -> Y250MC.SPC
[sigmove 13:49:56 DEBUG] transformed Y250Md.SPC -> Y250MD.SPC
[sigmove 13:49:56 DEBUG] transformed Y250Me.SPC -> Y250ME.SPC
[sigmove 13:49:56 DEBUG] transformed Y250Mf.SPC -> Y250MF.SPC
[Status 13:49:56 INFO] data for Y250 transferred to science data processing
[Tidy 13:49:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:49:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:49:56 INFO] resetting WatchDogTimer
[Status 13:49:57 INFO] Starting Set [AERI set: name Z250, 6 scans, 0 angle, D16300 command]
[Ingest 13:49:57 INFO] Sending XML status message
[Status 13:49:57 INFO] Mirror angle: 0
[Mirror 13:49:57 INFO] rotating to position Z
[Status 13:49:57 INFO] .SET file for ACQ96 ready
[Ingest 13:49:58 INFO] Starting acquisition
[Status 13:49:58 INFO] reading housekeeping
[Status 13:50:16 INFO] acquire complete
[Status 13:50:17 INFO] writing housekeeping
[Sequencer 13:50:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:50:17 INFO] incremented Z scene to 250 completed views
[Sequencer 13:50:17 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:50:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:50:17 INFO] incremented to [AERI set: name H251, 6 scans, 60 angle, D22500 command] set
[sigmove 13:50:17 INFO] Z250.SIG(18)
[sigmove 13:50:17 DEBUG] transformed Z250Ma.SPC -> Z250MA.SPC
[sigmove 13:50:17 DEBUG] transformed Z250Mb.SPC -> Z250MB.SPC
[sigmove 13:50:17 DEBUG] transformed Z250Mc.SPC -> Z250MC.SPC
[sigmove 13:50:17 DEBUG] transformed Z250Md.SPC -> Z250MD.SPC
[sigmove 13:50:17 DEBUG] transformed Z250Me.SPC -> Z250ME.SPC
[sigmove 13:50:17 DEBUG] transformed Z250Mf.SPC -> Z250MF.SPC
[Status 13:50:17 INFO] data for Z250 transferred to science data processing
[Tidy 13:50:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:50:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:50:17 INFO] resetting WatchDogTimer
[Status 13:50:17 INFO] Starting Set [AERI set: name H251, 6 scans, 60 angle, D22500 command]
[Ingest 13:50:17 INFO] Sending XML status message
[Status 13:50:17 INFO] Mirror angle: 60
[Mirror 13:50:17 INFO] rotating to position H
[Status 13:50:18 INFO] .SET file for ACQ96 ready
[Ingest 13:50:18 INFO] Starting acquisition
[Status 13:50:19 INFO] reading housekeeping
[Status 13:50:37 INFO] acquire complete
[Status 13:50:38 INFO] writing housekeeping
[Sequencer 13:50:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:50:38 INFO] incremented H scene to 251 completed views
[Sequencer 13:50:38 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:50:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:50:38 INFO] incremented to [AERI set: name A251, 6 scans, 120 angle, D28300 command] set
[sigmove 13:50:38 INFO] H251.SIG(18)
[sigmove 13:50:38 DEBUG] transformed H251Ma.SPC -> H251MA.SPC
[sigmove 13:50:38 DEBUG] transformed H251Mb.SPC -> H251MB.SPC
[sigmove 13:50:38 DEBUG] transformed H251Mc.SPC -> H251MC.SPC
[sigmove 13:50:38 DEBUG] transformed H251Md.SPC -> H251MD.SPC
[sigmove 13:50:38 DEBUG] transformed H251Me.SPC -> H251ME.SPC
[sigmove 13:50:38 DEBUG] transformed H251Mf.SPC -> H251MF.SPC
[Status 13:50:38 INFO] data for H251 transferred to science data processing
[Tidy 13:50:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:50:38 INFO] A249.FIN(19),H249.FIN(19),S249.FIN(19),T249.FIN(19),U249.FIN(19),V249.FIN(19),W249.FIN(19),X249.FIN(19),Y249.FIN(19),Z249.FIN(19),A250.FIN(19),H250.FIN(19),S250.FIN(19),T250.FIN(19),U250.FIN(19),V250.FIN(19),W250.FIN(19),X250.FIN(19),Y250.FIN(19),Z250.FIN(19)
[sigmove 13:50:38 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:50:38 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:50:42 DEBUG] done zipping
[WatchDog 13:50:43 INFO] resetting WatchDogTimer
[Status 13:50:43 INFO] Starting Set [AERI set: name A251, 6 scans, 120 angle, D28300 command]
[Ingest 13:50:43 INFO] Sending XML status message
[Status 13:50:43 INFO] Mirror angle: 120
[Mirror 13:50:43 INFO] rotating to position A
[Status 13:50:44 INFO] .SET file for ACQ96 ready
[Ingest 13:50:45 INFO] Starting acquisition
[Status 13:50:45 INFO] reading housekeeping
[Status 13:51:03 INFO] acquire complete
[Status 13:51:04 INFO] writing housekeeping
[Sequencer 13:51:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:51:04 INFO] incremented A scene to 251 completed views
[Sequencer 13:51:04 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:51:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:51:04 INFO] incremented to [AERI set: name S251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:51:04 INFO] A251.SIG(18)
[sigmove 13:51:04 DEBUG] transformed A251Ma.SPC -> A251MA.SPC
[sigmove 13:51:04 DEBUG] transformed A251Mb.SPC -> A251MB.SPC
[sigmove 13:51:04 DEBUG] transformed A251Mc.SPC -> A251MC.SPC
[sigmove 13:51:04 DEBUG] transformed A251Md.SPC -> A251MD.SPC
[sigmove 13:51:04 DEBUG] transformed A251Me.SPC -> A251ME.SPC
[sigmove 13:51:04 DEBUG] transformed A251Mf.SPC -> A251MF.SPC
[Status 13:51:04 INFO] data for A251 transferred to science data processing
[Tidy 13:51:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:51:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:51:04 INFO] resetting WatchDogTimer
[Status 13:51:04 INFO] Starting Set [AERI set: name S251, 6 scans, 0 angle, D16300 command]
[Ingest 13:51:04 INFO] Sending XML status message
[Status 13:51:04 INFO] Mirror angle: 0
[Mirror 13:51:04 INFO] rotating to position S
[Status 13:51:06 INFO] .SET file for ACQ96 ready
[Ingest 13:51:06 INFO] Starting acquisition
[Status 13:51:06 INFO] reading housekeeping
[Status 13:51:24 INFO] acquire complete
[Status 13:51:25 INFO] writing housekeeping
[Sequencer 13:51:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:51:25 INFO] incremented S scene to 251 completed views
[Sequencer 13:51:25 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:51:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:51:25 INFO] incremented to [AERI set: name T251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:51:25 INFO] S251.SIG(18)
[sigmove 13:51:25 DEBUG] transformed S251Ma.SPC -> S251MA.SPC
[sigmove 13:51:25 DEBUG] transformed S251Mb.SPC -> S251MB.SPC
[sigmove 13:51:25 DEBUG] transformed S251Mc.SPC -> S251MC.SPC
[sigmove 13:51:25 DEBUG] transformed S251Md.SPC -> S251MD.SPC
[sigmove 13:51:25 DEBUG] transformed S251Me.SPC -> S251ME.SPC
[sigmove 13:51:25 DEBUG] transformed S251Mf.SPC -> S251MF.SPC
[Status 13:51:25 INFO] data for S251 transferred to science data processing
[Tidy 13:51:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:51:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:51:25 INFO] resetting WatchDogTimer
[Status 13:51:25 INFO] Starting Set [AERI set: name T251, 6 scans, 0 angle, D16300 command]
[Ingest 13:51:25 INFO] Sending XML status message
[Status 13:51:25 INFO] Mirror angle: 0
[Mirror 13:51:26 INFO] rotating to position T
[Status 13:51:26 INFO] .SET file for ACQ96 ready
[Ingest 13:51:26 INFO] Starting acquisition
[Status 13:51:27 INFO] reading housekeeping
[Status 13:51:44 INFO] acquire complete
[Status 13:51:45 INFO] writing housekeeping
[Sequencer 13:51:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:51:45 INFO] incremented T scene to 251 completed views
[Sequencer 13:51:45 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:51:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:51:45 INFO] incremented to [AERI set: name U251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:51:45 INFO] T251.SIG(18)
[sigmove 13:51:45 DEBUG] transformed T251Ma.SPC -> T251MA.SPC
[sigmove 13:51:45 DEBUG] transformed T251Mb.SPC -> T251MB.SPC
[sigmove 13:51:45 DEBUG] transformed T251Mc.SPC -> T251MC.SPC
[sigmove 13:51:45 DEBUG] transformed T251Md.SPC -> T251MD.SPC
[sigmove 13:51:45 DEBUG] transformed T251Me.SPC -> T251ME.SPC
[sigmove 13:51:45 DEBUG] transformed T251Mf.SPC -> T251MF.SPC
[Status 13:51:45 INFO] data for T251 transferred to science data processing
[Tidy 13:51:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:51:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:51:45 INFO] resetting WatchDogTimer
[Status 13:51:46 INFO] Starting Set [AERI set: name U251, 6 scans, 0 angle, D16300 command]
[Ingest 13:51:46 INFO] Sending XML status message
[Status 13:51:46 INFO] Mirror angle: 0
[Mirror 13:51:46 INFO] rotating to position U
[Status 13:51:46 INFO] .SET file for ACQ96 ready
[Ingest 13:51:47 INFO] Starting acquisition
[Status 13:51:47 INFO] reading housekeeping
[Status 13:52:05 INFO] acquire complete
[Status 13:52:05 INFO] writing housekeeping
[Sequencer 13:52:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:52:05 INFO] incremented U scene to 251 completed views
[Sequencer 13:52:05 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:52:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:52:05 INFO] incremented to [AERI set: name V251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:52:05 INFO] U251.SIG(18)
[sigmove 13:52:05 DEBUG] transformed U251Ma.SPC -> U251MA.SPC
[sigmove 13:52:05 DEBUG] transformed U251Mb.SPC -> U251MB.SPC
[sigmove 13:52:05 DEBUG] transformed U251Mc.SPC -> U251MC.SPC
[sigmove 13:52:05 DEBUG] transformed U251Md.SPC -> U251MD.SPC
[sigmove 13:52:05 DEBUG] transformed U251Me.SPC -> U251ME.SPC
[sigmove 13:52:05 DEBUG] transformed U251Mf.SPC -> U251MF.SPC
[Status 13:52:05 INFO] data for U251 transferred to science data processing
[Tidy 13:52:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:52:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:52:05 INFO] resetting WatchDogTimer
[Status 13:52:06 INFO] Starting Set [AERI set: name V251, 6 scans, 0 angle, D16300 command]
[Ingest 13:52:06 INFO] Sending XML status message
[Status 13:52:06 INFO] Mirror angle: 0
[Mirror 13:52:06 INFO] rotating to position V
[Status 13:52:07 INFO] .SET file for ACQ96 ready
[Ingest 13:52:07 INFO] Starting acquisition
[Status 13:52:07 INFO] reading housekeeping
[Status 13:52:25 INFO] acquire complete
[Status 13:52:26 INFO] writing housekeeping
[Sequencer 13:52:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:52:26 INFO] incremented V scene to 251 completed views
[Sequencer 13:52:26 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:52:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:52:26 INFO] incremented to [AERI set: name W251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:52:26 INFO] V251.SIG(18)
[sigmove 13:52:26 DEBUG] transformed V251Ma.SPC -> V251MA.SPC
[sigmove 13:52:26 DEBUG] transformed V251Mb.SPC -> V251MB.SPC
[sigmove 13:52:26 DEBUG] transformed V251Mc.SPC -> V251MC.SPC
[sigmove 13:52:26 DEBUG] transformed V251Md.SPC -> V251MD.SPC
[sigmove 13:52:26 DEBUG] transformed V251Me.SPC -> V251ME.SPC
[sigmove 13:52:26 DEBUG] transformed V251Mf.SPC -> V251MF.SPC
[Status 13:52:26 INFO] data for V251 transferred to science data processing
[Tidy 13:52:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:52:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:52:26 INFO] resetting WatchDogTimer
[Status 13:52:26 INFO] Starting Set [AERI set: name W251, 6 scans, 0 angle, D16300 command]
[Ingest 13:52:26 INFO] Sending XML status message
[Status 13:52:26 INFO] Mirror angle: 0
[Mirror 13:52:26 INFO] rotating to position W
[Status 13:52:27 INFO] .SET file for ACQ96 ready
[Ingest 13:52:27 INFO] Starting acquisition
[Status 13:52:27 INFO] reading housekeeping
[Status 13:52:45 INFO] acquire complete
[Status 13:52:46 INFO] writing housekeeping
[Sequencer 13:52:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:52:46 INFO] incremented W scene to 251 completed views
[Sequencer 13:52:46 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:52:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:52:46 INFO] incremented to [AERI set: name X251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:52:46 INFO] W251.SIG(18)
[sigmove 13:52:46 DEBUG] transformed W251Ma.SPC -> W251MA.SPC
[sigmove 13:52:46 DEBUG] transformed W251Mb.SPC -> W251MB.SPC
[sigmove 13:52:46 DEBUG] transformed W251Mc.SPC -> W251MC.SPC
[sigmove 13:52:46 DEBUG] transformed W251Md.SPC -> W251MD.SPC
[sigmove 13:52:46 DEBUG] transformed W251Me.SPC -> W251ME.SPC
[sigmove 13:52:46 DEBUG] transformed W251Mf.SPC -> W251MF.SPC
[Status 13:52:46 INFO] data for W251 transferred to science data processing
[Tidy 13:52:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:52:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:52:46 INFO] resetting WatchDogTimer
[Status 13:52:46 INFO] Starting Set [AERI set: name X251, 6 scans, 0 angle, D16300 command]
[Ingest 13:52:46 INFO] Sending XML status message
[Status 13:52:46 INFO] Mirror angle: 0
[Mirror 13:52:46 INFO] rotating to position X
[Status 13:52:47 INFO] .SET file for ACQ96 ready
[Ingest 13:52:47 INFO] Starting acquisition
[Status 13:52:48 INFO] reading housekeeping
[Status 13:53:05 INFO] acquire complete
[Status 13:53:06 INFO] writing housekeeping
[Sequencer 13:53:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:53:06 INFO] incremented X scene to 251 completed views
[Sequencer 13:53:06 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:53:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:53:06 INFO] incremented to [AERI set: name Y251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:53:06 INFO] X251.SIG(18)
[sigmove 13:53:06 DEBUG] transformed X251Ma.SPC -> X251MA.SPC
[sigmove 13:53:06 DEBUG] transformed X251Mb.SPC -> X251MB.SPC
[sigmove 13:53:06 DEBUG] transformed X251Mc.SPC -> X251MC.SPC
[sigmove 13:53:06 DEBUG] transformed X251Md.SPC -> X251MD.SPC
[sigmove 13:53:06 DEBUG] transformed X251Me.SPC -> X251ME.SPC
[sigmove 13:53:06 DEBUG] transformed X251Mf.SPC -> X251MF.SPC
[Status 13:53:06 INFO] data for X251 transferred to science data processing
[Tidy 13:53:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:53:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:53:06 INFO] resetting WatchDogTimer
[Status 13:53:06 INFO] Starting Set [AERI set: name Y251, 6 scans, 0 angle, D16300 command]
[Ingest 13:53:06 INFO] Sending XML status message
[Status 13:53:06 INFO] Mirror angle: 0
[Mirror 13:53:07 INFO] rotating to position Y
[Status 13:53:07 INFO] .SET file for ACQ96 ready
[Ingest 13:53:07 INFO] Starting acquisition
[Status 13:53:08 INFO] reading housekeeping
[Status 13:53:25 INFO] acquire complete
[Status 13:53:26 INFO] writing housekeeping
[Sequencer 13:53:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:53:26 INFO] incremented Y scene to 251 completed views
[Sequencer 13:53:26 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:53:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:53:26 INFO] incremented to [AERI set: name Z251, 6 scans, 0 angle, D16300 command] set
[sigmove 13:53:26 INFO] Y251.SIG(18)
[sigmove 13:53:26 DEBUG] transformed Y251Ma.SPC -> Y251MA.SPC
[sigmove 13:53:26 DEBUG] transformed Y251Mb.SPC -> Y251MB.SPC
[sigmove 13:53:26 DEBUG] transformed Y251Mc.SPC -> Y251MC.SPC
[sigmove 13:53:26 DEBUG] transformed Y251Md.SPC -> Y251MD.SPC
[sigmove 13:53:26 DEBUG] transformed Y251Me.SPC -> Y251ME.SPC
[sigmove 13:53:26 DEBUG] transformed Y251Mf.SPC -> Y251MF.SPC
[Status 13:53:26 INFO] data for Y251 transferred to science data processing
[Tidy 13:53:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:53:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:53:26 INFO] resetting WatchDogTimer
[Status 13:53:26 INFO] Starting Set [AERI set: name Z251, 6 scans, 0 angle, D16300 command]
[Ingest 13:53:26 INFO] Sending XML status message
[Status 13:53:26 INFO] Mirror angle: 0
[Mirror 13:53:27 INFO] rotating to position Z
[Status 13:53:27 INFO] .SET file for ACQ96 ready
[Ingest 13:53:27 INFO] Starting acquisition
[Status 13:53:28 INFO] reading housekeeping
[Status 13:53:45 INFO] acquire complete
[Status 13:53:46 INFO] writing housekeeping
[Sequencer 13:53:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:53:46 INFO] incremented Z scene to 251 completed views
[Sequencer 13:53:46 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:53:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:53:46 INFO] incremented to [AERI set: name A252, 6 scans, 120 angle, D28300 command] set
[sigmove 13:53:46 INFO] Z251.SIG(18)
[sigmove 13:53:46 DEBUG] transformed Z251Ma.SPC -> Z251MA.SPC
[sigmove 13:53:46 DEBUG] transformed Z251Mb.SPC -> Z251MB.SPC
[sigmove 13:53:46 DEBUG] transformed Z251Mc.SPC -> Z251MC.SPC
[sigmove 13:53:46 DEBUG] transformed Z251Md.SPC -> Z251MD.SPC
[sigmove 13:53:46 DEBUG] transformed Z251Me.SPC -> Z251ME.SPC
[sigmove 13:53:46 DEBUG] transformed Z251Mf.SPC -> Z251MF.SPC
[Status 13:53:46 INFO] data for Z251 transferred to science data processing
[Tidy 13:53:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:53:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:53:46 INFO] resetting WatchDogTimer
[Status 13:53:47 INFO] Starting Set [AERI set: name A252, 6 scans, 120 angle, D28300 command]
[Ingest 13:53:47 INFO] Sending XML status message
[Status 13:53:47 INFO] Mirror angle: 120
[Mirror 13:53:47 INFO] rotating to position A
[Status 13:53:48 INFO] .SET file for ACQ96 ready
[Ingest 13:53:49 INFO] Starting acquisition
[Status 13:53:49 INFO] reading housekeeping
[Status 13:54:07 INFO] acquire complete
[Status 13:54:08 INFO] writing housekeeping
[Sequencer 13:54:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:54:08 INFO] incremented A scene to 252 completed views
[Sequencer 13:54:08 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:54:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:54:08 INFO] incremented to [AERI set: name H252, 6 scans, 60 angle, D22500 command] set
[sigmove 13:54:08 INFO] A252.SIG(18)
[sigmove 13:54:08 DEBUG] transformed A252Ma.SPC -> A252MA.SPC
[sigmove 13:54:08 DEBUG] transformed A252Mb.SPC -> A252MB.SPC
[sigmove 13:54:08 DEBUG] transformed A252Mc.SPC -> A252MC.SPC
[sigmove 13:54:08 DEBUG] transformed A252Md.SPC -> A252MD.SPC
[sigmove 13:54:08 DEBUG] transformed A252Me.SPC -> A252ME.SPC
[sigmove 13:54:08 DEBUG] transformed A252Mf.SPC -> A252MF.SPC
[Status 13:54:08 INFO] data for A252 transferred to science data processing
[Tidy 13:54:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:54:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:54:08 INFO] resetting WatchDogTimer
[Status 13:54:08 INFO] Starting Set [AERI set: name H252, 6 scans, 60 angle, D22500 command]
[Ingest 13:54:08 INFO] Sending XML status message
[Status 13:54:08 INFO] Mirror angle: 60
[Mirror 13:54:08 INFO] rotating to position H
[Status 13:54:09 INFO] .SET file for ACQ96 ready
[Ingest 13:54:10 INFO] Starting acquisition
[Status 13:54:10 INFO] reading housekeeping
[Status 13:54:28 INFO] acquire complete
[Status 13:54:29 INFO] writing housekeeping
[Sequencer 13:54:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:54:29 INFO] incremented H scene to 252 completed views
[Sequencer 13:54:29 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:54:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:54:29 INFO] incremented to [AERI set: name S252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:54:29 INFO] H252.SIG(18)
[sigmove 13:54:29 DEBUG] transformed H252Ma.SPC -> H252MA.SPC
[sigmove 13:54:29 DEBUG] transformed H252Mb.SPC -> H252MB.SPC
[sigmove 13:54:29 DEBUG] transformed H252Mc.SPC -> H252MC.SPC
[sigmove 13:54:29 DEBUG] transformed H252Md.SPC -> H252MD.SPC
[sigmove 13:54:29 DEBUG] transformed H252Me.SPC -> H252ME.SPC
[sigmove 13:54:29 DEBUG] transformed H252Mf.SPC -> H252MF.SPC
[Status 13:54:29 INFO] data for H252 transferred to science data processing
[Tidy 13:54:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:54:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:54:29 INFO] resetting WatchDogTimer
[Status 13:54:29 INFO] Starting Set [AERI set: name S252, 6 scans, 0 angle, D16300 command]
[Ingest 13:54:29 INFO] Sending XML status message
[Status 13:54:29 INFO] Mirror angle: 0
[Mirror 13:54:30 INFO] rotating to position S
[Status 13:54:31 INFO] .SET file for ACQ96 ready
[Ingest 13:54:31 INFO] Starting acquisition
[Status 13:54:31 INFO] reading housekeeping
[Status 13:54:49 INFO] acquire complete
[Status 13:54:50 INFO] writing housekeeping
[Sequencer 13:54:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:54:50 INFO] incremented S scene to 252 completed views
[Sequencer 13:54:50 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:54:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:54:50 INFO] incremented to [AERI set: name T252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:54:50 INFO] S252.SIG(18)
[sigmove 13:54:50 DEBUG] transformed S252Ma.SPC -> S252MA.SPC
[sigmove 13:54:50 DEBUG] transformed S252Mb.SPC -> S252MB.SPC
[sigmove 13:54:50 DEBUG] transformed S252Mc.SPC -> S252MC.SPC
[sigmove 13:54:50 DEBUG] transformed S252Md.SPC -> S252MD.SPC
[sigmove 13:54:50 DEBUG] transformed S252Me.SPC -> S252ME.SPC
[sigmove 13:54:50 DEBUG] transformed S252Mf.SPC -> S252MF.SPC
[Status 13:54:50 INFO] data for S252 transferred to science data processing
[Tidy 13:54:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:54:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:54:50 INFO] resetting WatchDogTimer
[Status 13:54:51 INFO] Starting Set [AERI set: name T252, 6 scans, 0 angle, D16300 command]
[Ingest 13:54:51 INFO] Sending XML status message
[Status 13:54:51 INFO] Mirror angle: 0
[Mirror 13:54:51 INFO] rotating to position T
[Status 13:54:51 INFO] .SET file for ACQ96 ready
[Ingest 13:54:52 INFO] Starting acquisition
[Status 13:54:52 INFO] reading housekeeping
[Status 13:55:10 INFO] acquire complete
[Status 13:55:10 INFO] writing housekeeping
[Sequencer 13:55:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:55:10 INFO] incremented T scene to 252 completed views
[Sequencer 13:55:10 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:55:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:55:10 INFO] incremented to [AERI set: name U252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:55:10 INFO] T252.SIG(18)
[sigmove 13:55:10 DEBUG] transformed T252Ma.SPC -> T252MA.SPC
[sigmove 13:55:10 DEBUG] transformed T252Mb.SPC -> T252MB.SPC
[sigmove 13:55:10 DEBUG] transformed T252Mc.SPC -> T252MC.SPC
[sigmove 13:55:10 DEBUG] transformed T252Md.SPC -> T252MD.SPC
[sigmove 13:55:10 DEBUG] transformed T252Me.SPC -> T252ME.SPC
[sigmove 13:55:10 DEBUG] transformed T252Mf.SPC -> T252MF.SPC
[Status 13:55:10 INFO] data for T252 transferred to science data processing
[Tidy 13:55:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:55:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:55:11 INFO] resetting WatchDogTimer
[Status 13:55:11 INFO] Starting Set [AERI set: name U252, 6 scans, 0 angle, D16300 command]
[Ingest 13:55:11 INFO] Sending XML status message
[Status 13:55:11 INFO] Mirror angle: 0
[Mirror 13:55:11 INFO] rotating to position U
[Status 13:55:12 INFO] .SET file for ACQ96 ready
[Ingest 13:55:12 INFO] Starting acquisition
[Status 13:55:12 INFO] reading housekeeping
[Status 13:55:30 INFO] acquire complete
[Status 13:55:31 INFO] writing housekeeping
[Sequencer 13:55:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:55:31 INFO] incremented U scene to 252 completed views
[Sequencer 13:55:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:55:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:55:31 INFO] incremented to [AERI set: name V252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:55:31 INFO] U252.SIG(18)
[sigmove 13:55:31 DEBUG] transformed U252Ma.SPC -> U252MA.SPC
[sigmove 13:55:31 DEBUG] transformed U252Mb.SPC -> U252MB.SPC
[sigmove 13:55:31 DEBUG] transformed U252Mc.SPC -> U252MC.SPC
[sigmove 13:55:31 DEBUG] transformed U252Md.SPC -> U252MD.SPC
[sigmove 13:55:31 DEBUG] transformed U252Me.SPC -> U252ME.SPC
[sigmove 13:55:31 DEBUG] transformed U252Mf.SPC -> U252MF.SPC
[Status 13:55:31 INFO] data for U252 transferred to science data processing
[Tidy 13:55:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:55:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:55:31 INFO] resetting WatchDogTimer
[Status 13:55:31 INFO] Starting Set [AERI set: name V252, 6 scans, 0 angle, D16300 command]
[Ingest 13:55:31 INFO] Sending XML status message
[Status 13:55:31 INFO] Mirror angle: 0
[Mirror 13:55:31 INFO] rotating to position V
[Status 13:55:32 INFO] .SET file for ACQ96 ready
[Ingest 13:55:32 INFO] Starting acquisition
[Status 13:55:32 INFO] reading housekeeping
[Status 13:55:50 INFO] acquire complete
[Status 13:55:51 INFO] writing housekeeping
[Sequencer 13:55:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:55:51 INFO] incremented V scene to 252 completed views
[Sequencer 13:55:51 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:55:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:55:51 INFO] incremented to [AERI set: name W252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:55:51 INFO] V252.SIG(18)
[sigmove 13:55:51 DEBUG] transformed V252Ma.SPC -> V252MA.SPC
[sigmove 13:55:51 DEBUG] transformed V252Mb.SPC -> V252MB.SPC
[sigmove 13:55:51 DEBUG] transformed V252Mc.SPC -> V252MC.SPC
[sigmove 13:55:51 DEBUG] transformed V252Md.SPC -> V252MD.SPC
[sigmove 13:55:51 DEBUG] transformed V252Me.SPC -> V252ME.SPC
[sigmove 13:55:51 DEBUG] transformed V252Mf.SPC -> V252MF.SPC
[Status 13:55:51 INFO] data for V252 transferred to science data processing
[Tidy 13:55:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:55:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:55:51 INFO] resetting WatchDogTimer
[Status 13:55:51 INFO] Starting Set [AERI set: name W252, 6 scans, 0 angle, D16300 command]
[Ingest 13:55:51 INFO] Sending XML status message
[Status 13:55:51 INFO] Mirror angle: 0
[Mirror 13:55:52 INFO] rotating to position W
[Status 13:55:52 INFO] .SET file for ACQ96 ready
[Ingest 13:55:52 INFO] Starting acquisition
[Status 13:55:53 INFO] reading housekeeping
[Status 13:56:10 INFO] acquire complete
[Status 13:56:11 INFO] writing housekeeping
[Sequencer 13:56:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:56:11 INFO] incremented W scene to 252 completed views
[Sequencer 13:56:11 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:56:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:56:11 INFO] incremented to [AERI set: name X252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:56:11 INFO] W252.SIG(18)
[sigmove 13:56:11 DEBUG] transformed W252Ma.SPC -> W252MA.SPC
[sigmove 13:56:11 DEBUG] transformed W252Mb.SPC -> W252MB.SPC
[sigmove 13:56:11 DEBUG] transformed W252Mc.SPC -> W252MC.SPC
[sigmove 13:56:11 DEBUG] transformed W252Md.SPC -> W252MD.SPC
[sigmove 13:56:11 DEBUG] transformed W252Me.SPC -> W252ME.SPC
[sigmove 13:56:11 DEBUG] transformed W252Mf.SPC -> W252MF.SPC
[Status 13:56:11 INFO] data for W252 transferred to science data processing
[Tidy 13:56:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:56:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:56:11 INFO] resetting WatchDogTimer
[Status 13:56:11 INFO] Starting Set [AERI set: name X252, 6 scans, 0 angle, D16300 command]
[Ingest 13:56:11 INFO] Sending XML status message
[Status 13:56:11 INFO] Mirror angle: 0
[Mirror 13:56:12 INFO] rotating to position X
[Status 13:56:12 INFO] .SET file for ACQ96 ready
[Ingest 13:56:12 INFO] Starting acquisition
[Status 13:56:13 INFO] reading housekeeping
[Status 13:56:30 INFO] acquire complete
[Status 13:56:31 INFO] writing housekeeping
[Sequencer 13:56:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:56:31 INFO] incremented X scene to 252 completed views
[Sequencer 13:56:31 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:56:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:56:31 INFO] incremented to [AERI set: name Y252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:56:31 INFO] X252.SIG(18)
[sigmove 13:56:31 DEBUG] transformed X252Ma.SPC -> X252MA.SPC
[sigmove 13:56:31 DEBUG] transformed X252Mb.SPC -> X252MB.SPC
[sigmove 13:56:31 DEBUG] transformed X252Mc.SPC -> X252MC.SPC
[sigmove 13:56:31 DEBUG] transformed X252Md.SPC -> X252MD.SPC
[sigmove 13:56:31 DEBUG] transformed X252Me.SPC -> X252ME.SPC
[sigmove 13:56:31 DEBUG] transformed X252Mf.SPC -> X252MF.SPC
[Status 13:56:31 INFO] data for X252 transferred to science data processing
[Tidy 13:56:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:56:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:56:31 INFO] resetting WatchDogTimer
[Status 13:56:32 INFO] Starting Set [AERI set: name Y252, 6 scans, 0 angle, D16300 command]
[Ingest 13:56:32 INFO] Sending XML status message
[Status 13:56:32 INFO] Mirror angle: 0
[Mirror 13:56:32 INFO] rotating to position Y
[Status 13:56:32 INFO] .SET file for ACQ96 ready
[Ingest 13:56:33 INFO] Starting acquisition
[Status 13:56:33 INFO] reading housekeeping
[Status 13:56:51 INFO] acquire complete
[Status 13:56:51 INFO] writing housekeeping
[Sequencer 13:56:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:56:51 INFO] incremented Y scene to 252 completed views
[Sequencer 13:56:51 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:56:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:56:51 INFO] incremented to [AERI set: name Z252, 6 scans, 0 angle, D16300 command] set
[sigmove 13:56:51 INFO] Y252.SIG(18)
[sigmove 13:56:51 DEBUG] transformed Y252Ma.SPC -> Y252MA.SPC
[sigmove 13:56:51 DEBUG] transformed Y252Mb.SPC -> Y252MB.SPC
[sigmove 13:56:51 DEBUG] transformed Y252Mc.SPC -> Y252MC.SPC
[sigmove 13:56:51 DEBUG] transformed Y252Md.SPC -> Y252MD.SPC
[sigmove 13:56:51 DEBUG] transformed Y252Me.SPC -> Y252ME.SPC
[sigmove 13:56:51 DEBUG] transformed Y252Mf.SPC -> Y252MF.SPC
[Status 13:56:51 INFO] data for Y252 transferred to science data processing
[Tidy 13:56:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:56:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:56:51 INFO] resetting WatchDogTimer
[Status 13:56:52 INFO] Starting Set [AERI set: name Z252, 6 scans, 0 angle, D16300 command]
[Ingest 13:56:52 INFO] Sending XML status message
[Status 13:56:52 INFO] Mirror angle: 0
[Mirror 13:56:52 INFO] rotating to position Z
[Status 13:56:53 INFO] .SET file for ACQ96 ready
[Ingest 13:56:53 INFO] Starting acquisition
[Status 13:56:53 INFO] reading housekeeping
[Status 13:57:11 INFO] acquire complete
[Status 13:57:12 INFO] writing housekeeping
[Sequencer 13:57:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:57:12 INFO] incremented Z scene to 252 completed views
[Sequencer 13:57:12 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 13:57:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:57:12 INFO] incremented to [AERI set: name H253, 6 scans, 60 angle, D22500 command] set
[sigmove 13:57:12 INFO] Z252.SIG(18)
[sigmove 13:57:12 DEBUG] transformed Z252Ma.SPC -> Z252MA.SPC
[sigmove 13:57:12 DEBUG] transformed Z252Mb.SPC -> Z252MB.SPC
[sigmove 13:57:12 DEBUG] transformed Z252Mc.SPC -> Z252MC.SPC
[sigmove 13:57:12 DEBUG] transformed Z252Md.SPC -> Z252MD.SPC
[sigmove 13:57:12 DEBUG] transformed Z252Me.SPC -> Z252ME.SPC
[sigmove 13:57:12 DEBUG] transformed Z252Mf.SPC -> Z252MF.SPC
[Status 13:57:12 INFO] data for Z252 transferred to science data processing
[Tidy 13:57:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:57:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:57:12 INFO] resetting WatchDogTimer
[Status 13:57:12 INFO] Starting Set [AERI set: name H253, 6 scans, 60 angle, D22500 command]
[Ingest 13:57:12 INFO] Sending XML status message
[Status 13:57:12 INFO] Mirror angle: 60
[Mirror 13:57:12 INFO] rotating to position H
[Status 13:57:13 INFO] .SET file for ACQ96 ready
[Ingest 13:57:14 INFO] Starting acquisition
[Status 13:57:14 INFO] reading housekeeping
[Status 13:57:32 INFO] acquire complete
[Status 13:57:33 INFO] writing housekeeping
[Sequencer 13:57:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:57:33 INFO] incremented H scene to 253 completed views
[Sequencer 13:57:33 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 13:57:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:57:33 INFO] incremented to [AERI set: name A253, 6 scans, 120 angle, D28300 command] set
[sigmove 13:57:33 INFO] H253.SIG(18)
[sigmove 13:57:33 DEBUG] transformed H253Ma.SPC -> H253MA.SPC
[sigmove 13:57:33 DEBUG] transformed H253Mb.SPC -> H253MB.SPC
[sigmove 13:57:33 DEBUG] transformed H253Mc.SPC -> H253MC.SPC
[sigmove 13:57:33 DEBUG] transformed H253Md.SPC -> H253MD.SPC
[sigmove 13:57:33 DEBUG] transformed H253Me.SPC -> H253ME.SPC
[sigmove 13:57:33 DEBUG] transformed H253Mf.SPC -> H253MF.SPC
[Status 13:57:33 INFO] data for H253 transferred to science data processing
[Tidy 13:57:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:57:33 INFO] A251.FIN(19),H251.FIN(19),S251.FIN(19),T251.FIN(19),U251.FIN(19),V251.FIN(19),W251.FIN(19),X251.FIN(19),Y251.FIN(19),Z251.FIN(19),A252.FIN(19),H252.FIN(19),S252.FIN(19),T252.FIN(19),U252.FIN(19),V252.FIN(19),W252.FIN(19),X252.FIN(19),Y252.FIN(19),Z252.FIN(19)
[sigmove 13:57:33 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:57:33 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 13:57:37 DEBUG] done zipping
[WatchDog 13:57:38 INFO] resetting WatchDogTimer
[Status 13:57:38 INFO] Starting Set [AERI set: name A253, 6 scans, 120 angle, D28300 command]
[Ingest 13:57:38 INFO] Sending XML status message
[Status 13:57:38 INFO] Mirror angle: 120
[Mirror 13:57:38 INFO] rotating to position A
[Status 13:57:39 INFO] .SET file for ACQ96 ready
[Ingest 13:57:40 INFO] Starting acquisition
[Status 13:57:40 INFO] reading housekeeping
[Status 13:57:58 INFO] acquire complete
[Status 13:57:59 INFO] writing housekeeping
[Sequencer 13:57:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:57:59 INFO] incremented A scene to 253 completed views
[Sequencer 13:57:59 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 13:57:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:57:59 INFO] incremented to [AERI set: name S253, 6 scans, 0 angle, D16300 command] set
[sigmove 13:57:59 INFO] A253.SIG(18)
[sigmove 13:57:59 DEBUG] transformed A253Ma.SPC -> A253MA.SPC
[sigmove 13:57:59 DEBUG] transformed A253Mb.SPC -> A253MB.SPC
[sigmove 13:57:59 DEBUG] transformed A253Mc.SPC -> A253MC.SPC
[sigmove 13:57:59 DEBUG] transformed A253Md.SPC -> A253MD.SPC
[sigmove 13:57:59 DEBUG] transformed A253Me.SPC -> A253ME.SPC
[sigmove 13:57:59 DEBUG] transformed A253Mf.SPC -> A253MF.SPC
[Status 13:57:59 INFO] data for A253 transferred to science data processing
[Tidy 13:57:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:57:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:57:59 INFO] resetting WatchDogTimer
[Status 13:57:59 INFO] Starting Set [AERI set: name S253, 6 scans, 0 angle, D16300 command]
[Ingest 13:57:59 INFO] Sending XML status message
[Status 13:57:59 INFO] Mirror angle: 0
[Mirror 13:58:00 INFO] rotating to position S
[Status 13:58:01 INFO] .SET file for ACQ96 ready
[Ingest 13:58:01 INFO] Starting acquisition
[Status 13:58:02 INFO] reading housekeeping
[Status 13:58:19 INFO] acquire complete
[Status 13:58:20 INFO] writing housekeeping
[Sequencer 13:58:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:58:20 INFO] incremented S scene to 253 completed views
[Sequencer 13:58:20 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:58:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:58:20 INFO] incremented to [AERI set: name T253, 6 scans, 0 angle, D16300 command] set
[sigmove 13:58:20 INFO] S253.SIG(18)
[sigmove 13:58:20 DEBUG] transformed S253Ma.SPC -> S253MA.SPC
[sigmove 13:58:20 DEBUG] transformed S253Mb.SPC -> S253MB.SPC
[sigmove 13:58:20 DEBUG] transformed S253Mc.SPC -> S253MC.SPC
[sigmove 13:58:20 DEBUG] transformed S253Md.SPC -> S253MD.SPC
[sigmove 13:58:20 DEBUG] transformed S253Me.SPC -> S253ME.SPC
[sigmove 13:58:20 DEBUG] transformed S253Mf.SPC -> S253MF.SPC
[Status 13:58:20 INFO] data for S253 transferred to science data processing
[Tidy 13:58:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:58:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:58:20 INFO] resetting WatchDogTimer
[Status 13:58:21 INFO] Starting Set [AERI set: name T253, 6 scans, 0 angle, D16300 command]
[Ingest 13:58:21 INFO] Sending XML status message
[Status 13:58:21 INFO] Mirror angle: 0
[Mirror 13:58:21 INFO] rotating to position T
[Status 13:58:21 INFO] .SET file for ACQ96 ready
[Ingest 13:58:22 INFO] Starting acquisition
[Status 13:58:22 INFO] reading housekeeping
[Status 13:58:39 INFO] acquire complete
[Status 13:58:40 INFO] writing housekeeping
[Sequencer 13:58:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:58:40 INFO] incremented T scene to 253 completed views
[Sequencer 13:58:40 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:58:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:58:40 INFO] incremented to [AERI set: name U253, 6 scans, 0 angle, D16300 command] set
[sigmove 13:58:40 INFO] T253.SIG(18)
[sigmove 13:58:40 DEBUG] transformed T253Ma.SPC -> T253MA.SPC
[sigmove 13:58:40 DEBUG] transformed T253Mb.SPC -> T253MB.SPC
[sigmove 13:58:40 DEBUG] transformed T253Mc.SPC -> T253MC.SPC
[sigmove 13:58:40 DEBUG] transformed T253Md.SPC -> T253MD.SPC
[sigmove 13:58:40 DEBUG] transformed T253Me.SPC -> T253ME.SPC
[sigmove 13:58:40 DEBUG] transformed T253Mf.SPC -> T253MF.SPC
[Status 13:58:40 INFO] data for T253 transferred to science data processing
[Tidy 13:58:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:58:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:58:40 INFO] resetting WatchDogTimer
[Status 13:58:41 INFO] Starting Set [AERI set: name U253, 6 scans, 0 angle, D16300 command]
[Ingest 13:58:41 INFO] Sending XML status message
[Status 13:58:41 INFO] Mirror angle: 0
[Mirror 13:58:41 INFO] rotating to position U
[Status 13:58:41 INFO] .SET file for ACQ96 ready
[Ingest 13:58:42 INFO] Starting acquisition
[Status 13:58:42 INFO] reading housekeeping
[Status 13:59:00 INFO] acquire complete
[Status 13:59:00 INFO] writing housekeeping
[Sequencer 13:59:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:59:01 INFO] incremented U scene to 253 completed views
[Sequencer 13:59:01 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:59:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:59:01 INFO] incremented to [AERI set: name V253, 6 scans, 0 angle, D16300 command] set
[sigmove 13:59:01 INFO] U253.SIG(18)
[sigmove 13:59:01 DEBUG] transformed U253Ma.SPC -> U253MA.SPC
[sigmove 13:59:01 DEBUG] transformed U253Mb.SPC -> U253MB.SPC
[sigmove 13:59:01 DEBUG] transformed U253Mc.SPC -> U253MC.SPC
[sigmove 13:59:01 DEBUG] transformed U253Md.SPC -> U253MD.SPC
[sigmove 13:59:01 DEBUG] transformed U253Me.SPC -> U253ME.SPC
[sigmove 13:59:01 DEBUG] transformed U253Mf.SPC -> U253MF.SPC
[Status 13:59:01 INFO] data for U253 transferred to science data processing
[Tidy 13:59:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:59:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:59:01 INFO] resetting WatchDogTimer
[Status 13:59:01 INFO] Starting Set [AERI set: name V253, 6 scans, 0 angle, D16300 command]
[Ingest 13:59:01 INFO] Sending XML status message
[Status 13:59:01 INFO] Mirror angle: 0
[Mirror 13:59:01 INFO] rotating to position V
[Status 13:59:02 INFO] .SET file for ACQ96 ready
[Ingest 13:59:02 INFO] Starting acquisition
[Status 13:59:02 INFO] reading housekeeping
[Status 13:59:20 INFO] acquire complete
[Status 13:59:21 INFO] writing housekeeping
[Sequencer 13:59:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:59:21 INFO] incremented V scene to 253 completed views
[Sequencer 13:59:21 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:59:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:59:21 INFO] incremented to [AERI set: name W253, 6 scans, 0 angle, D16300 command] set
[sigmove 13:59:21 INFO] V253.SIG(18)
[sigmove 13:59:21 DEBUG] transformed V253Ma.SPC -> V253MA.SPC
[sigmove 13:59:21 DEBUG] transformed V253Mb.SPC -> V253MB.SPC
[sigmove 13:59:21 DEBUG] transformed V253Mc.SPC -> V253MC.SPC
[sigmove 13:59:21 DEBUG] transformed V253Md.SPC -> V253MD.SPC
[sigmove 13:59:21 DEBUG] transformed V253Me.SPC -> V253ME.SPC
[sigmove 13:59:21 DEBUG] transformed V253Mf.SPC -> V253MF.SPC
[Status 13:59:21 INFO] data for V253 transferred to science data processing
[Tidy 13:59:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:59:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:59:21 INFO] resetting WatchDogTimer
[Status 13:59:21 INFO] Starting Set [AERI set: name W253, 6 scans, 0 angle, D16300 command]
[Ingest 13:59:21 INFO] Sending XML status message
[Status 13:59:21 INFO] Mirror angle: 0
[Mirror 13:59:21 INFO] rotating to position W
[Status 13:59:22 INFO] .SET file for ACQ96 ready
[Ingest 13:59:22 INFO] Starting acquisition
[Status 13:59:22 INFO] reading housekeeping
[Status 13:59:40 INFO] acquire complete
[Status 13:59:41 INFO] writing housekeeping
[Sequencer 13:59:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 13:59:41 INFO] incremented W scene to 253 completed views
[Sequencer 13:59:41 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 13:59:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 13:59:41 INFO] incremented to [AERI set: name X253, 6 scans, 0 angle, D16300 command] set
[sigmove 13:59:41 INFO] W253.SIG(18)
[sigmove 13:59:41 DEBUG] transformed W253Ma.SPC -> W253MA.SPC
[sigmove 13:59:41 DEBUG] transformed W253Mb.SPC -> W253MB.SPC
[sigmove 13:59:41 DEBUG] transformed W253Mc.SPC -> W253MC.SPC
[sigmove 13:59:41 DEBUG] transformed W253Md.SPC -> W253MD.SPC
[sigmove 13:59:41 DEBUG] transformed W253Me.SPC -> W253ME.SPC
[sigmove 13:59:41 DEBUG] transformed W253Mf.SPC -> W253MF.SPC
[Status 13:59:41 INFO] data for W253 transferred to science data processing
[Tidy 13:59:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 13:59:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 13:59:41 INFO] resetting WatchDogTimer
[Status 13:59:41 INFO] Starting Set [AERI set: name X253, 6 scans, 0 angle, D16300 command]
[Ingest 13:59:41 INFO] Sending XML status message
[Status 13:59:41 INFO] Mirror angle: 0
[Mirror 13:59:42 INFO] rotating to position X
[Status 13:59:42 INFO] .SET file for ACQ96 ready
[Ingest 13:59:42 INFO] Starting acquisition
[Status 13:59:43 INFO] reading housekeeping
[Status 14:00:00 INFO] acquire complete
[Status 14:00:01 INFO] writing housekeeping
[Sequencer 14:00:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:00:01 INFO] incremented X scene to 253 completed views
[Sequencer 14:00:01 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:00:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:00:01 INFO] incremented to [AERI set: name Y253, 6 scans, 0 angle, D16300 command] set
[sigmove 14:00:01 INFO] X253.SIG(18)
[sigmove 14:00:01 DEBUG] transformed X253Ma.SPC -> X253MA.SPC
[sigmove 14:00:01 DEBUG] transformed X253Mb.SPC -> X253MB.SPC
[sigmove 14:00:01 DEBUG] transformed X253Mc.SPC -> X253MC.SPC
[sigmove 14:00:01 DEBUG] transformed X253Md.SPC -> X253MD.SPC
[sigmove 14:00:01 DEBUG] transformed X253Me.SPC -> X253ME.SPC
[sigmove 14:00:01 DEBUG] transformed X253Mf.SPC -> X253MF.SPC
[Status 14:00:01 INFO] data for X253 transferred to science data processing
[Tidy 14:00:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:00:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:00:01 INFO] resetting WatchDogTimer
[Status 14:00:01 INFO] Starting Set [AERI set: name Y253, 6 scans, 0 angle, D16300 command]
[Ingest 14:00:01 INFO] Sending XML status message
[Status 14:00:01 INFO] Mirror angle: 0
[Mirror 14:00:02 INFO] rotating to position Y
[Status 14:00:02 INFO] .SET file for ACQ96 ready
[Ingest 14:00:03 INFO] Starting acquisition
[Status 14:00:03 INFO] reading housekeeping
[Status 14:00:20 INFO] acquire complete
[Status 14:00:21 INFO] writing housekeeping
[Sequencer 14:00:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:00:21 INFO] incremented Y scene to 253 completed views
[Sequencer 14:00:21 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:00:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:00:21 INFO] incremented to [AERI set: name Z253, 6 scans, 0 angle, D16300 command] set
[sigmove 14:00:21 INFO] Y253.SIG(18)
[sigmove 14:00:21 DEBUG] transformed Y253Ma.SPC -> Y253MA.SPC
[sigmove 14:00:21 DEBUG] transformed Y253Mb.SPC -> Y253MB.SPC
[sigmove 14:00:21 DEBUG] transformed Y253Mc.SPC -> Y253MC.SPC
[sigmove 14:00:21 DEBUG] transformed Y253Md.SPC -> Y253MD.SPC
[sigmove 14:00:21 DEBUG] transformed Y253Me.SPC -> Y253ME.SPC
[sigmove 14:00:21 DEBUG] transformed Y253Mf.SPC -> Y253MF.SPC
[Status 14:00:21 INFO] data for Y253 transferred to science data processing
[Tidy 14:00:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:00:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:00:21 INFO] resetting WatchDogTimer
[Status 14:00:22 INFO] Starting Set [AERI set: name Z253, 6 scans, 0 angle, D16300 command]
[Ingest 14:00:22 INFO] Sending XML status message
[Status 14:00:22 INFO] Mirror angle: 0
[Mirror 14:00:22 INFO] rotating to position Z
[Status 14:00:22 INFO] .SET file for ACQ96 ready
[Ingest 14:00:23 INFO] Starting acquisition
[Status 14:00:23 INFO] reading housekeeping
[Status 14:00:41 INFO] acquire complete
[Status 14:00:41 INFO] writing housekeeping
[Sequencer 14:00:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:00:41 INFO] incremented Z scene to 253 completed views
[Sequencer 14:00:41 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:00:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:00:41 INFO] incremented to [AERI set: name A254, 6 scans, 120 angle, D28300 command] set
[sigmove 14:00:41 INFO] Z253.SIG(18)
[sigmove 14:00:41 DEBUG] transformed Z253Ma.SPC -> Z253MA.SPC
[sigmove 14:00:41 DEBUG] transformed Z253Mb.SPC -> Z253MB.SPC
[sigmove 14:00:41 DEBUG] transformed Z253Mc.SPC -> Z253MC.SPC
[sigmove 14:00:41 DEBUG] transformed Z253Md.SPC -> Z253MD.SPC
[sigmove 14:00:41 DEBUG] transformed Z253Me.SPC -> Z253ME.SPC
[sigmove 14:00:41 DEBUG] transformed Z253Mf.SPC -> Z253MF.SPC
[Status 14:00:41 INFO] data for Z253 transferred to science data processing
[Tidy 14:00:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:00:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:00:41 INFO] resetting WatchDogTimer
[Status 14:00:42 INFO] Starting Set [AERI set: name A254, 6 scans, 120 angle, D28300 command]
[Ingest 14:00:42 INFO] Sending XML status message
[Status 14:00:42 INFO] Mirror angle: 120
[Mirror 14:00:42 INFO] rotating to position A
[Status 14:00:44 INFO] .SET file for ACQ96 ready
[Ingest 14:00:44 INFO] Starting acquisition
[Status 14:00:44 INFO] reading housekeeping
[Status 14:01:02 INFO] acquire complete
[Status 14:01:03 INFO] writing housekeeping
[Sequencer 14:01:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:01:03 INFO] incremented A scene to 254 completed views
[Sequencer 14:01:03 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:01:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:01:03 INFO] incremented to [AERI set: name H254, 6 scans, 60 angle, D22500 command] set
[sigmove 14:01:03 INFO] A254.SIG(18)
[sigmove 14:01:03 DEBUG] transformed A254Ma.SPC -> A254MA.SPC
[sigmove 14:01:03 DEBUG] transformed A254Mb.SPC -> A254MB.SPC
[sigmove 14:01:03 DEBUG] transformed A254Mc.SPC -> A254MC.SPC
[sigmove 14:01:03 DEBUG] transformed A254Md.SPC -> A254MD.SPC
[sigmove 14:01:03 DEBUG] transformed A254Me.SPC -> A254ME.SPC
[sigmove 14:01:03 DEBUG] transformed A254Mf.SPC -> A254MF.SPC
[Status 14:01:03 INFO] data for A254 transferred to science data processing
[Tidy 14:01:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:01:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:01:03 INFO] resetting WatchDogTimer
[Status 14:01:03 INFO] Starting Set [AERI set: name H254, 6 scans, 60 angle, D22500 command]
[Ingest 14:01:03 INFO] Sending XML status message
[Status 14:01:03 INFO] Mirror angle: 60
[Mirror 14:01:04 INFO] rotating to position H
[Status 14:01:04 INFO] .SET file for ACQ96 ready
[Ingest 14:01:05 INFO] Starting acquisition
[Status 14:01:05 INFO] reading housekeeping
[Status 14:01:23 INFO] acquire complete
[Status 14:01:24 INFO] writing housekeeping
[Sequencer 14:01:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:01:24 INFO] incremented H scene to 254 completed views
[Sequencer 14:01:24 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:01:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:01:24 INFO] incremented to [AERI set: name S254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:01:24 INFO] H254.SIG(18)
[sigmove 14:01:24 DEBUG] transformed H254Ma.SPC -> H254MA.SPC
[sigmove 14:01:24 DEBUG] transformed H254Mb.SPC -> H254MB.SPC
[sigmove 14:01:24 DEBUG] transformed H254Mc.SPC -> H254MC.SPC
[sigmove 14:01:24 DEBUG] transformed H254Md.SPC -> H254MD.SPC
[sigmove 14:01:24 DEBUG] transformed H254Me.SPC -> H254ME.SPC
[sigmove 14:01:24 DEBUG] transformed H254Mf.SPC -> H254MF.SPC
[Status 14:01:24 INFO] data for H254 transferred to science data processing
[Tidy 14:01:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:01:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:01:24 INFO] resetting WatchDogTimer
[Status 14:01:24 INFO] Starting Set [AERI set: name S254, 6 scans, 0 angle, D16300 command]
[Ingest 14:01:24 INFO] Sending XML status message
[Status 14:01:24 INFO] Mirror angle: 0
[Mirror 14:01:25 INFO] rotating to position S
[Status 14:01:26 INFO] .SET file for ACQ96 ready
[Ingest 14:01:26 INFO] Starting acquisition
[Status 14:01:26 INFO] reading housekeeping
[Status 14:01:44 INFO] acquire complete
[Status 14:01:45 INFO] writing housekeeping
[Sequencer 14:01:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:01:45 INFO] incremented S scene to 254 completed views
[Sequencer 14:01:45 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:01:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:01:45 INFO] incremented to [AERI set: name T254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:01:45 INFO] S254.SIG(18)
[sigmove 14:01:45 DEBUG] transformed S254Ma.SPC -> S254MA.SPC
[sigmove 14:01:45 DEBUG] transformed S254Mb.SPC -> S254MB.SPC
[sigmove 14:01:45 DEBUG] transformed S254Mc.SPC -> S254MC.SPC
[sigmove 14:01:45 DEBUG] transformed S254Md.SPC -> S254MD.SPC
[sigmove 14:01:45 DEBUG] transformed S254Me.SPC -> S254ME.SPC
[sigmove 14:01:45 DEBUG] transformed S254Mf.SPC -> S254MF.SPC
[Status 14:01:45 INFO] data for S254 transferred to science data processing
[Tidy 14:01:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:01:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:01:45 INFO] resetting WatchDogTimer
[Status 14:01:46 INFO] Starting Set [AERI set: name T254, 6 scans, 0 angle, D16300 command]
[Ingest 14:01:46 INFO] Sending XML status message
[Status 14:01:46 INFO] Mirror angle: 0
[Mirror 14:01:46 INFO] rotating to position T
[Status 14:01:47 INFO] .SET file for ACQ96 ready
[Ingest 14:01:47 INFO] Starting acquisition
[Status 14:01:47 INFO] reading housekeeping
[Status 14:02:05 INFO] acquire complete
[Status 14:02:06 INFO] writing housekeeping
[Sequencer 14:02:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:02:06 INFO] incremented T scene to 254 completed views
[Sequencer 14:02:06 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:02:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:02:06 INFO] incremented to [AERI set: name U254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:02:06 INFO] T254.SIG(18)
[sigmove 14:02:06 DEBUG] transformed T254Ma.SPC -> T254MA.SPC
[sigmove 14:02:06 DEBUG] transformed T254Mb.SPC -> T254MB.SPC
[sigmove 14:02:06 DEBUG] transformed T254Mc.SPC -> T254MC.SPC
[sigmove 14:02:06 DEBUG] transformed T254Md.SPC -> T254MD.SPC
[sigmove 14:02:06 DEBUG] transformed T254Me.SPC -> T254ME.SPC
[sigmove 14:02:06 DEBUG] transformed T254Mf.SPC -> T254MF.SPC
[Status 14:02:06 INFO] data for T254 transferred to science data processing
[Tidy 14:02:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:02:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:02:06 INFO] resetting WatchDogTimer
[Status 14:02:06 INFO] Starting Set [AERI set: name U254, 6 scans, 0 angle, D16300 command]
[Ingest 14:02:06 INFO] Sending XML status message
[Status 14:02:06 INFO] Mirror angle: 0
[Mirror 14:02:06 INFO] rotating to position U
[Status 14:02:07 INFO] .SET file for ACQ96 ready
[Ingest 14:02:07 INFO] Starting acquisition
[Status 14:02:07 INFO] reading housekeeping
[Status 14:02:25 INFO] acquire complete
[Status 14:02:26 INFO] writing housekeeping
[Sequencer 14:02:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:02:26 INFO] incremented U scene to 254 completed views
[Sequencer 14:02:26 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:02:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:02:26 INFO] incremented to [AERI set: name V254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:02:26 INFO] U254.SIG(18)
[sigmove 14:02:26 DEBUG] transformed U254Ma.SPC -> U254MA.SPC
[sigmove 14:02:26 DEBUG] transformed U254Mb.SPC -> U254MB.SPC
[sigmove 14:02:26 DEBUG] transformed U254Mc.SPC -> U254MC.SPC
[sigmove 14:02:26 DEBUG] transformed U254Md.SPC -> U254MD.SPC
[sigmove 14:02:26 DEBUG] transformed U254Me.SPC -> U254ME.SPC
[sigmove 14:02:26 DEBUG] transformed U254Mf.SPC -> U254MF.SPC
[Status 14:02:26 INFO] data for U254 transferred to science data processing
[Tidy 14:02:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:02:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:02:26 INFO] resetting WatchDogTimer
[Status 14:02:26 INFO] Starting Set [AERI set: name V254, 6 scans, 0 angle, D16300 command]
[Ingest 14:02:26 INFO] Sending XML status message
[Status 14:02:26 INFO] Mirror angle: 0
[Mirror 14:02:27 INFO] rotating to position V
[Status 14:02:27 INFO] .SET file for ACQ96 ready
[Ingest 14:02:27 INFO] Starting acquisition
[Status 14:02:28 INFO] reading housekeeping
[Status 14:02:45 INFO] acquire complete
[Status 14:02:46 INFO] writing housekeeping
[Sequencer 14:02:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:02:46 INFO] incremented V scene to 254 completed views
[Sequencer 14:02:46 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:02:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:02:46 INFO] incremented to [AERI set: name W254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:02:46 INFO] V254.SIG(18)
[sigmove 14:02:46 DEBUG] transformed V254Ma.SPC -> V254MA.SPC
[sigmove 14:02:46 DEBUG] transformed V254Mb.SPC -> V254MB.SPC
[sigmove 14:02:46 DEBUG] transformed V254Mc.SPC -> V254MC.SPC
[sigmove 14:02:46 DEBUG] transformed V254Md.SPC -> V254MD.SPC
[sigmove 14:02:46 DEBUG] transformed V254Me.SPC -> V254ME.SPC
[sigmove 14:02:46 DEBUG] transformed V254Mf.SPC -> V254MF.SPC
[Status 14:02:46 INFO] data for V254 transferred to science data processing
[Tidy 14:02:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:02:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:02:46 INFO] resetting WatchDogTimer
[Status 14:02:46 INFO] Starting Set [AERI set: name W254, 6 scans, 0 angle, D16300 command]
[Ingest 14:02:46 INFO] Sending XML status message
[Status 14:02:46 INFO] Mirror angle: 0
[Mirror 14:02:47 INFO] rotating to position W
[Status 14:02:47 INFO] .SET file for ACQ96 ready
[Ingest 14:02:47 INFO] Starting acquisition
[Status 14:02:48 INFO] reading housekeeping
[Status 14:03:05 INFO] acquire complete
[Status 14:03:06 INFO] writing housekeeping
[Sequencer 14:03:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:03:06 INFO] incremented W scene to 254 completed views
[Sequencer 14:03:06 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:03:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:03:06 INFO] incremented to [AERI set: name X254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:03:06 INFO] W254.SIG(18)
[sigmove 14:03:06 DEBUG] transformed W254Ma.SPC -> W254MA.SPC
[sigmove 14:03:06 DEBUG] transformed W254Mb.SPC -> W254MB.SPC
[sigmove 14:03:06 DEBUG] transformed W254Mc.SPC -> W254MC.SPC
[sigmove 14:03:06 DEBUG] transformed W254Md.SPC -> W254MD.SPC
[sigmove 14:03:06 DEBUG] transformed W254Me.SPC -> W254ME.SPC
[sigmove 14:03:06 DEBUG] transformed W254Mf.SPC -> W254MF.SPC
[Status 14:03:06 INFO] data for W254 transferred to science data processing
[Tidy 14:03:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:03:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:03:06 INFO] resetting WatchDogTimer
[Status 14:03:07 INFO] Starting Set [AERI set: name X254, 6 scans, 0 angle, D16300 command]
[Ingest 14:03:07 INFO] Sending XML status message
[Status 14:03:07 INFO] Mirror angle: 0
[Mirror 14:03:07 INFO] rotating to position X
[Status 14:03:07 INFO] .SET file for ACQ96 ready
[Ingest 14:03:08 INFO] Starting acquisition
[Status 14:03:08 INFO] reading housekeeping
[Status 14:03:25 INFO] acquire complete
[Status 14:03:26 INFO] writing housekeeping
[Sequencer 14:03:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:03:26 INFO] incremented X scene to 254 completed views
[Sequencer 14:03:26 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:03:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:03:26 INFO] incremented to [AERI set: name Y254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:03:26 INFO] X254.SIG(18)
[sigmove 14:03:26 DEBUG] transformed X254Ma.SPC -> X254MA.SPC
[sigmove 14:03:26 DEBUG] transformed X254Mb.SPC -> X254MB.SPC
[sigmove 14:03:26 DEBUG] transformed X254Mc.SPC -> X254MC.SPC
[sigmove 14:03:26 DEBUG] transformed X254Md.SPC -> X254MD.SPC
[sigmove 14:03:26 DEBUG] transformed X254Me.SPC -> X254ME.SPC
[sigmove 14:03:26 DEBUG] transformed X254Mf.SPC -> X254MF.SPC
[Status 14:03:26 INFO] data for X254 transferred to science data processing
[Tidy 14:03:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:03:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:03:26 INFO] resetting WatchDogTimer
[Status 14:03:27 INFO] Starting Set [AERI set: name Y254, 6 scans, 0 angle, D16300 command]
[Ingest 14:03:27 INFO] Sending XML status message
[Status 14:03:27 INFO] Mirror angle: 0
[Mirror 14:03:27 INFO] rotating to position Y
[Status 14:03:28 INFO] .SET file for ACQ96 ready
[Ingest 14:03:28 INFO] Starting acquisition
[Status 14:03:28 INFO] reading housekeeping
[Status 14:03:46 INFO] acquire complete
[Status 14:03:47 INFO] writing housekeeping
[Sequencer 14:03:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:03:47 INFO] incremented Y scene to 254 completed views
[Sequencer 14:03:47 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:03:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:03:47 INFO] incremented to [AERI set: name Z254, 6 scans, 0 angle, D16300 command] set
[sigmove 14:03:47 INFO] Y254.SIG(18)
[sigmove 14:03:47 DEBUG] transformed Y254Ma.SPC -> Y254MA.SPC
[sigmove 14:03:47 DEBUG] transformed Y254Mb.SPC -> Y254MB.SPC
[sigmove 14:03:47 DEBUG] transformed Y254Mc.SPC -> Y254MC.SPC
[sigmove 14:03:47 DEBUG] transformed Y254Md.SPC -> Y254MD.SPC
[sigmove 14:03:47 DEBUG] transformed Y254Me.SPC -> Y254ME.SPC
[sigmove 14:03:47 DEBUG] transformed Y254Mf.SPC -> Y254MF.SPC
[Status 14:03:47 INFO] data for Y254 transferred to science data processing
[Tidy 14:03:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:03:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:03:47 INFO] resetting WatchDogTimer
[Status 14:03:47 INFO] Starting Set [AERI set: name Z254, 6 scans, 0 angle, D16300 command]
[Ingest 14:03:47 INFO] Sending XML status message
[Status 14:03:47 INFO] Mirror angle: 0
[Mirror 14:03:47 INFO] rotating to position Z
[Status 14:03:48 INFO] .SET file for ACQ96 ready
[Ingest 14:03:48 INFO] Starting acquisition
[Status 14:03:48 INFO] reading housekeeping
[Status 14:04:06 INFO] acquire complete
[Status 14:04:07 INFO] writing housekeeping
[Sequencer 14:04:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:04:07 INFO] incremented Z scene to 254 completed views
[Sequencer 14:04:07 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:04:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:04:07 INFO] incremented to [AERI set: name H255, 6 scans, 60 angle, D22500 command] set
[sigmove 14:04:07 INFO] Z254.SIG(18)
[sigmove 14:04:07 DEBUG] transformed Z254Ma.SPC -> Z254MA.SPC
[sigmove 14:04:07 DEBUG] transformed Z254Mb.SPC -> Z254MB.SPC
[sigmove 14:04:07 DEBUG] transformed Z254Mc.SPC -> Z254MC.SPC
[sigmove 14:04:07 DEBUG] transformed Z254Md.SPC -> Z254MD.SPC
[sigmove 14:04:07 DEBUG] transformed Z254Me.SPC -> Z254ME.SPC
[sigmove 14:04:07 DEBUG] transformed Z254Mf.SPC -> Z254MF.SPC
[Status 14:04:07 INFO] data for Z254 transferred to science data processing
[Tidy 14:04:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:04:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:04:07 INFO] resetting WatchDogTimer
[Status 14:04:07 INFO] Starting Set [AERI set: name H255, 6 scans, 60 angle, D22500 command]
[Ingest 14:04:07 INFO] Sending XML status message
[Status 14:04:07 INFO] Mirror angle: 60
[Mirror 14:04:07 INFO] rotating to position H
[Status 14:04:08 INFO] .SET file for ACQ96 ready
[Ingest 14:04:09 INFO] Starting acquisition
[Status 14:04:09 INFO] reading housekeeping
[Status 14:04:27 INFO] acquire complete
[Status 14:04:28 INFO] writing housekeeping
[Sequencer 14:04:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:04:28 INFO] incremented H scene to 255 completed views
[Sequencer 14:04:28 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:04:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:04:28 INFO] incremented to [AERI set: name A255, 6 scans, 120 angle, D28300 command] set
[sigmove 14:04:28 INFO] H255.SIG(18)
[sigmove 14:04:28 DEBUG] transformed H255Ma.SPC -> H255MA.SPC
[sigmove 14:04:28 DEBUG] transformed H255Mb.SPC -> H255MB.SPC
[sigmove 14:04:28 DEBUG] transformed H255Mc.SPC -> H255MC.SPC
[sigmove 14:04:28 DEBUG] transformed H255Md.SPC -> H255MD.SPC
[sigmove 14:04:28 DEBUG] transformed H255Me.SPC -> H255ME.SPC
[sigmove 14:04:28 DEBUG] transformed H255Mf.SPC -> H255MF.SPC
[Status 14:04:28 INFO] data for H255 transferred to science data processing
[Tidy 14:04:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:04:28 INFO] A253.FIN(19),H253.FIN(19),S253.FIN(19),T253.FIN(19),U253.FIN(19),V253.FIN(19),W253.FIN(19),X253.FIN(19),Y253.FIN(19),Z253.FIN(19),A254.FIN(19),H254.FIN(19),S254.FIN(19),T254.FIN(19),U254.FIN(19),V254.FIN(19),W254.FIN(19),X254.FIN(19),Y254.FIN(19),Z254.FIN(19)
[sigmove 14:04:28 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:04:28 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:04:33 DEBUG] done zipping
[WatchDog 14:04:33 INFO] resetting WatchDogTimer
[Status 14:04:33 INFO] Starting Set [AERI set: name A255, 6 scans, 120 angle, D28300 command]
[Ingest 14:04:33 INFO] Sending XML status message
[Status 14:04:33 INFO] Mirror angle: 120
[Mirror 14:04:34 INFO] rotating to position A
[Status 14:04:35 INFO] .SET file for ACQ96 ready
[Ingest 14:04:35 INFO] Starting acquisition
[Status 14:04:35 INFO] reading housekeeping
[Status 14:04:53 INFO] acquire complete
[Status 14:04:54 INFO] writing housekeeping
[Sequencer 14:04:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:04:54 INFO] incremented A scene to 255 completed views
[Sequencer 14:04:54 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:04:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:04:54 INFO] incremented to [AERI set: name S255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:04:54 INFO] A255.SIG(18)
[sigmove 14:04:54 DEBUG] transformed A255Ma.SPC -> A255MA.SPC
[sigmove 14:04:54 DEBUG] transformed A255Mb.SPC -> A255MB.SPC
[sigmove 14:04:54 DEBUG] transformed A255Mc.SPC -> A255MC.SPC
[sigmove 14:04:54 DEBUG] transformed A255Md.SPC -> A255MD.SPC
[sigmove 14:04:54 DEBUG] transformed A255Me.SPC -> A255ME.SPC
[sigmove 14:04:54 DEBUG] transformed A255Mf.SPC -> A255MF.SPC
[Status 14:04:54 INFO] data for A255 transferred to science data processing
[Tidy 14:04:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:04:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:04:54 INFO] resetting WatchDogTimer
[Status 14:04:54 INFO] Starting Set [AERI set: name S255, 6 scans, 0 angle, D16300 command]
[Ingest 14:04:54 INFO] Sending XML status message
[Status 14:04:54 INFO] Mirror angle: 0
[Mirror 14:04:55 INFO] rotating to position S
[Status 14:04:56 INFO] .SET file for ACQ96 ready
[Ingest 14:04:56 INFO] Starting acquisition
[Status 14:04:57 INFO] reading housekeeping
[Status 14:05:14 INFO] acquire complete
[Status 14:05:15 INFO] writing housekeeping
[Sequencer 14:05:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:05:15 INFO] incremented S scene to 255 completed views
[Sequencer 14:05:15 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:05:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:05:15 INFO] incremented to [AERI set: name T255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:05:15 INFO] S255.SIG(18)
[sigmove 14:05:15 DEBUG] transformed S255Ma.SPC -> S255MA.SPC
[sigmove 14:05:15 DEBUG] transformed S255Mb.SPC -> S255MB.SPC
[sigmove 14:05:15 DEBUG] transformed S255Mc.SPC -> S255MC.SPC
[sigmove 14:05:15 DEBUG] transformed S255Md.SPC -> S255MD.SPC
[sigmove 14:05:15 DEBUG] transformed S255Me.SPC -> S255ME.SPC
[sigmove 14:05:15 DEBUG] transformed S255Mf.SPC -> S255MF.SPC
[Status 14:05:15 INFO] data for S255 transferred to science data processing
[Tidy 14:05:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:05:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:05:15 INFO] resetting WatchDogTimer
[Status 14:05:16 INFO] Starting Set [AERI set: name T255, 6 scans, 0 angle, D16300 command]
[Ingest 14:05:16 INFO] Sending XML status message
[Status 14:05:16 INFO] Mirror angle: 0
[Mirror 14:05:16 INFO] rotating to position T
[Status 14:05:16 INFO] .SET file for ACQ96 ready
[Ingest 14:05:17 INFO] Starting acquisition
[Status 14:05:17 INFO] reading housekeeping
[Status 14:05:34 INFO] acquire complete
[Status 14:05:35 INFO] writing housekeeping
[Sequencer 14:05:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:05:35 INFO] incremented T scene to 255 completed views
[Sequencer 14:05:35 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:05:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:05:35 INFO] incremented to [AERI set: name U255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:05:35 INFO] T255.SIG(18)
[sigmove 14:05:35 DEBUG] transformed T255Ma.SPC -> T255MA.SPC
[sigmove 14:05:35 DEBUG] transformed T255Mb.SPC -> T255MB.SPC
[sigmove 14:05:35 DEBUG] transformed T255Mc.SPC -> T255MC.SPC
[sigmove 14:05:35 DEBUG] transformed T255Md.SPC -> T255MD.SPC
[sigmove 14:05:35 DEBUG] transformed T255Me.SPC -> T255ME.SPC
[sigmove 14:05:35 DEBUG] transformed T255Mf.SPC -> T255MF.SPC
[Status 14:05:35 INFO] data for T255 transferred to science data processing
[Tidy 14:05:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:05:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:05:35 INFO] resetting WatchDogTimer
[Status 14:05:36 INFO] Starting Set [AERI set: name U255, 6 scans, 0 angle, D16300 command]
[Ingest 14:05:36 INFO] Sending XML status message
[Status 14:05:36 INFO] Mirror angle: 0
[Mirror 14:05:36 INFO] rotating to position U
[Status 14:05:37 INFO] .SET file for ACQ96 ready
[Ingest 14:05:37 INFO] Starting acquisition
[Status 14:05:37 INFO] reading housekeeping
[Status 14:05:55 INFO] acquire complete
[Status 14:05:56 INFO] writing housekeeping
[Sequencer 14:05:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:05:56 INFO] incremented U scene to 255 completed views
[Sequencer 14:05:56 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:05:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:05:56 INFO] incremented to [AERI set: name V255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:05:56 INFO] U255.SIG(18)
[sigmove 14:05:56 DEBUG] transformed U255Ma.SPC -> U255MA.SPC
[sigmove 14:05:56 DEBUG] transformed U255Mb.SPC -> U255MB.SPC
[sigmove 14:05:56 DEBUG] transformed U255Mc.SPC -> U255MC.SPC
[sigmove 14:05:56 DEBUG] transformed U255Md.SPC -> U255MD.SPC
[sigmove 14:05:56 DEBUG] transformed U255Me.SPC -> U255ME.SPC
[sigmove 14:05:56 DEBUG] transformed U255Mf.SPC -> U255MF.SPC
[Status 14:05:56 INFO] data for U255 transferred to science data processing
[Tidy 14:05:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:05:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:05:56 INFO] resetting WatchDogTimer
[Status 14:05:56 INFO] Starting Set [AERI set: name V255, 6 scans, 0 angle, D16300 command]
[Ingest 14:05:56 INFO] Sending XML status message
[Status 14:05:56 INFO] Mirror angle: 0
[Mirror 14:05:56 INFO] rotating to position V
[Status 14:05:57 INFO] .SET file for ACQ96 ready
[Ingest 14:05:57 INFO] Starting acquisition
[Status 14:05:57 INFO] reading housekeeping
[Status 14:06:15 INFO] acquire complete
[Status 14:06:16 INFO] writing housekeeping
[Sequencer 14:06:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:06:16 INFO] incremented V scene to 255 completed views
[Sequencer 14:06:16 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:06:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:06:16 INFO] incremented to [AERI set: name W255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:06:16 INFO] V255.SIG(18)
[sigmove 14:06:16 DEBUG] transformed V255Ma.SPC -> V255MA.SPC
[sigmove 14:06:16 DEBUG] transformed V255Mb.SPC -> V255MB.SPC
[sigmove 14:06:16 DEBUG] transformed V255Mc.SPC -> V255MC.SPC
[sigmove 14:06:16 DEBUG] transformed V255Md.SPC -> V255MD.SPC
[sigmove 14:06:16 DEBUG] transformed V255Me.SPC -> V255ME.SPC
[sigmove 14:06:16 DEBUG] transformed V255Mf.SPC -> V255MF.SPC
[Status 14:06:16 INFO] data for V255 transferred to science data processing
[Tidy 14:06:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:06:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:06:16 INFO] resetting WatchDogTimer
[Status 14:06:16 INFO] Starting Set [AERI set: name W255, 6 scans, 0 angle, D16300 command]
[Ingest 14:06:16 INFO] Sending XML status message
[Status 14:06:16 INFO] Mirror angle: 0
[Mirror 14:06:16 INFO] rotating to position W
[Status 14:06:17 INFO] .SET file for ACQ96 ready
[Ingest 14:06:17 INFO] Starting acquisition
[Status 14:06:18 INFO] reading housekeeping
[Status 14:06:35 INFO] acquire complete
[Status 14:06:36 INFO] writing housekeeping
[Sequencer 14:06:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:06:36 INFO] incremented W scene to 255 completed views
[Sequencer 14:06:36 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:06:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:06:36 INFO] incremented to [AERI set: name X255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:06:36 INFO] W255.SIG(18)
[sigmove 14:06:36 DEBUG] transformed W255Ma.SPC -> W255MA.SPC
[sigmove 14:06:36 DEBUG] transformed W255Mb.SPC -> W255MB.SPC
[sigmove 14:06:36 DEBUG] transformed W255Mc.SPC -> W255MC.SPC
[sigmove 14:06:36 DEBUG] transformed W255Md.SPC -> W255MD.SPC
[sigmove 14:06:36 DEBUG] transformed W255Me.SPC -> W255ME.SPC
[sigmove 14:06:36 DEBUG] transformed W255Mf.SPC -> W255MF.SPC
[Status 14:06:36 INFO] data for W255 transferred to science data processing
[Tidy 14:06:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:06:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:06:36 INFO] resetting WatchDogTimer
[Status 14:06:36 INFO] Starting Set [AERI set: name X255, 6 scans, 0 angle, D16300 command]
[Ingest 14:06:36 INFO] Sending XML status message
[Status 14:06:36 INFO] Mirror angle: 0
[Mirror 14:06:37 INFO] rotating to position X
[Status 14:06:37 INFO] .SET file for ACQ96 ready
[Ingest 14:06:37 INFO] Starting acquisition
[Status 14:06:38 INFO] reading housekeeping
[Status 14:06:55 INFO] acquire complete
[Status 14:06:56 INFO] writing housekeeping
[Sequencer 14:06:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:06:56 INFO] incremented X scene to 255 completed views
[Sequencer 14:06:56 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:06:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:06:56 INFO] incremented to [AERI set: name Y255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:06:56 INFO] X255.SIG(18)
[sigmove 14:06:56 DEBUG] transformed X255Ma.SPC -> X255MA.SPC
[sigmove 14:06:56 DEBUG] transformed X255Mb.SPC -> X255MB.SPC
[sigmove 14:06:56 DEBUG] transformed X255Mc.SPC -> X255MC.SPC
[sigmove 14:06:56 DEBUG] transformed X255Md.SPC -> X255MD.SPC
[sigmove 14:06:56 DEBUG] transformed X255Me.SPC -> X255ME.SPC
[sigmove 14:06:56 DEBUG] transformed X255Mf.SPC -> X255MF.SPC
[Status 14:06:56 INFO] data for X255 transferred to science data processing
[Tidy 14:06:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:06:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:06:56 INFO] resetting WatchDogTimer
[Status 14:06:56 INFO] Starting Set [AERI set: name Y255, 6 scans, 0 angle, D16300 command]
[Ingest 14:06:56 INFO] Sending XML status message
[Status 14:06:57 INFO] Mirror angle: 0
[Mirror 14:06:57 INFO] rotating to position Y
[Status 14:06:57 INFO] .SET file for ACQ96 ready
[Ingest 14:06:58 INFO] Starting acquisition
[Status 14:06:58 INFO] reading housekeeping
[Status 14:07:15 INFO] acquire complete
[Status 14:07:16 INFO] writing housekeeping
[Sequencer 14:07:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:07:16 INFO] incremented Y scene to 255 completed views
[Sequencer 14:07:16 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:07:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:07:16 INFO] incremented to [AERI set: name Z255, 6 scans, 0 angle, D16300 command] set
[sigmove 14:07:16 INFO] Y255.SIG(18)
[sigmove 14:07:16 DEBUG] transformed Y255Ma.SPC -> Y255MA.SPC
[sigmove 14:07:16 DEBUG] transformed Y255Mb.SPC -> Y255MB.SPC
[sigmove 14:07:16 DEBUG] transformed Y255Mc.SPC -> Y255MC.SPC
[sigmove 14:07:16 DEBUG] transformed Y255Md.SPC -> Y255MD.SPC
[sigmove 14:07:16 DEBUG] transformed Y255Me.SPC -> Y255ME.SPC
[sigmove 14:07:16 DEBUG] transformed Y255Mf.SPC -> Y255MF.SPC
[Status 14:07:16 INFO] data for Y255 transferred to science data processing
[Tidy 14:07:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:07:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:07:16 INFO] resetting WatchDogTimer
[Status 14:07:17 INFO] Starting Set [AERI set: name Z255, 6 scans, 0 angle, D16300 command]
[Ingest 14:07:17 INFO] Sending XML status message
[Status 14:07:17 INFO] Mirror angle: 0
[Mirror 14:07:17 INFO] rotating to position Z
[Status 14:07:17 INFO] .SET file for ACQ96 ready
[Ingest 14:07:18 INFO] Starting acquisition
[Status 14:07:18 INFO] reading housekeeping
[Status 14:07:36 INFO] acquire complete
[Status 14:07:37 INFO] writing housekeeping
[Sequencer 14:07:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:07:37 INFO] incremented Z scene to 255 completed views
[Sequencer 14:07:37 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:07:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:07:37 INFO] incremented to [AERI set: name A256, 6 scans, 120 angle, D28300 command] set
[sigmove 14:07:37 INFO] Z255.SIG(18)
[sigmove 14:07:37 DEBUG] transformed Z255Ma.SPC -> Z255MA.SPC
[sigmove 14:07:37 DEBUG] transformed Z255Mb.SPC -> Z255MB.SPC
[sigmove 14:07:37 DEBUG] transformed Z255Mc.SPC -> Z255MC.SPC
[sigmove 14:07:37 DEBUG] transformed Z255Md.SPC -> Z255MD.SPC
[sigmove 14:07:37 DEBUG] transformed Z255Me.SPC -> Z255ME.SPC
[sigmove 14:07:37 DEBUG] transformed Z255Mf.SPC -> Z255MF.SPC
[Status 14:07:37 INFO] data for Z255 transferred to science data processing
[Tidy 14:07:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:07:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:07:37 INFO] resetting WatchDogTimer
[Status 14:07:37 INFO] Starting Set [AERI set: name A256, 6 scans, 120 angle, D28300 command]
[Ingest 14:07:37 INFO] Sending XML status message
[Status 14:07:37 INFO] Mirror angle: 120
[Mirror 14:07:37 INFO] rotating to position A
[Status 14:07:39 INFO] .SET file for ACQ96 ready
[Ingest 14:07:39 INFO] Starting acquisition
[Status 14:07:39 INFO] reading housekeeping
[Status 14:07:57 INFO] acquire complete
[Status 14:07:58 INFO] writing housekeeping
[Sequencer 14:07:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:07:58 INFO] incremented A scene to 256 completed views
[Sequencer 14:07:58 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:07:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:07:58 INFO] incremented to [AERI set: name H256, 6 scans, 60 angle, D22500 command] set
[sigmove 14:07:58 INFO] A256.SIG(18)
[sigmove 14:07:58 DEBUG] transformed A256Ma.SPC -> A256MA.SPC
[sigmove 14:07:58 DEBUG] transformed A256Mb.SPC -> A256MB.SPC
[sigmove 14:07:58 DEBUG] transformed A256Mc.SPC -> A256MC.SPC
[sigmove 14:07:58 DEBUG] transformed A256Md.SPC -> A256MD.SPC
[sigmove 14:07:58 DEBUG] transformed A256Me.SPC -> A256ME.SPC
[sigmove 14:07:58 DEBUG] transformed A256Mf.SPC -> A256MF.SPC
[Status 14:07:58 INFO] data for A256 transferred to science data processing
[Tidy 14:07:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:07:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:07:58 INFO] resetting WatchDogTimer
[Status 14:07:58 INFO] Starting Set [AERI set: name H256, 6 scans, 60 angle, D22500 command]
[Ingest 14:07:58 INFO] Sending XML status message
[Status 14:07:58 INFO] Mirror angle: 60
[Mirror 14:07:59 INFO] rotating to position H
[Status 14:08:00 INFO] .SET file for ACQ96 ready
[Ingest 14:08:00 INFO] Starting acquisition
[Status 14:08:00 INFO] reading housekeeping
[Status 14:08:18 INFO] acquire complete
[Status 14:08:19 INFO] writing housekeeping
[Sequencer 14:08:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:08:19 INFO] incremented H scene to 256 completed views
[Sequencer 14:08:19 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:08:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:08:19 INFO] incremented to [AERI set: name S256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:08:19 INFO] H256.SIG(18)
[sigmove 14:08:19 DEBUG] transformed H256Ma.SPC -> H256MA.SPC
[sigmove 14:08:19 DEBUG] transformed H256Mb.SPC -> H256MB.SPC
[sigmove 14:08:19 DEBUG] transformed H256Mc.SPC -> H256MC.SPC
[sigmove 14:08:19 DEBUG] transformed H256Md.SPC -> H256MD.SPC
[sigmove 14:08:19 DEBUG] transformed H256Me.SPC -> H256ME.SPC
[sigmove 14:08:19 DEBUG] transformed H256Mf.SPC -> H256MF.SPC
[Status 14:08:19 INFO] data for H256 transferred to science data processing
[Tidy 14:08:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:08:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:08:19 INFO] resetting WatchDogTimer
[Status 14:08:20 INFO] Starting Set [AERI set: name S256, 6 scans, 0 angle, D16300 command]
[Ingest 14:08:20 INFO] Sending XML status message
[Status 14:08:20 INFO] Mirror angle: 0
[Mirror 14:08:20 INFO] rotating to position S
[Status 14:08:21 INFO] .SET file for ACQ96 ready
[Ingest 14:08:21 INFO] Starting acquisition
[Status 14:08:21 INFO] reading housekeeping
[Status 14:08:40 INFO] acquire complete
[Status 14:08:40 INFO] writing housekeeping
[Sequencer 14:08:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:08:40 INFO] incremented S scene to 256 completed views
[Sequencer 14:08:40 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:08:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:08:40 INFO] incremented to [AERI set: name T256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:08:40 INFO] S256.SIG(18)
[sigmove 14:08:40 DEBUG] transformed S256Ma.SPC -> S256MA.SPC
[sigmove 14:08:40 DEBUG] transformed S256Mb.SPC -> S256MB.SPC
[sigmove 14:08:40 DEBUG] transformed S256Mc.SPC -> S256MC.SPC
[sigmove 14:08:40 DEBUG] transformed S256Md.SPC -> S256MD.SPC
[sigmove 14:08:40 DEBUG] transformed S256Me.SPC -> S256ME.SPC
[sigmove 14:08:40 DEBUG] transformed S256Mf.SPC -> S256MF.SPC
[Status 14:08:40 INFO] data for S256 transferred to science data processing
[Tidy 14:08:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:08:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:08:40 INFO] resetting WatchDogTimer
[Status 14:08:41 INFO] Starting Set [AERI set: name T256, 6 scans, 0 angle, D16300 command]
[Ingest 14:08:41 INFO] Sending XML status message
[Status 14:08:41 INFO] Mirror angle: 0
[Mirror 14:08:41 INFO] rotating to position T
[Status 14:08:42 INFO] .SET file for ACQ96 ready
[Ingest 14:08:42 INFO] Starting acquisition
[Status 14:08:42 INFO] reading housekeeping
[Status 14:09:00 INFO] acquire complete
[Status 14:09:01 INFO] writing housekeeping
[Sequencer 14:09:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:09:01 INFO] incremented T scene to 256 completed views
[Sequencer 14:09:01 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:09:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:09:01 INFO] incremented to [AERI set: name U256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:09:01 INFO] T256.SIG(18)
[sigmove 14:09:01 DEBUG] transformed T256Ma.SPC -> T256MA.SPC
[sigmove 14:09:01 DEBUG] transformed T256Mb.SPC -> T256MB.SPC
[sigmove 14:09:01 DEBUG] transformed T256Mc.SPC -> T256MC.SPC
[sigmove 14:09:01 DEBUG] transformed T256Md.SPC -> T256MD.SPC
[sigmove 14:09:01 DEBUG] transformed T256Me.SPC -> T256ME.SPC
[sigmove 14:09:01 DEBUG] transformed T256Mf.SPC -> T256MF.SPC
[Status 14:09:01 INFO] data for T256 transferred to science data processing
[Tidy 14:09:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:09:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:09:01 INFO] resetting WatchDogTimer
[Status 14:09:01 INFO] Starting Set [AERI set: name U256, 6 scans, 0 angle, D16300 command]
[Ingest 14:09:01 INFO] Sending XML status message
[Status 14:09:01 INFO] Mirror angle: 0
[Mirror 14:09:01 INFO] rotating to position U
[Status 14:09:02 INFO] .SET file for ACQ96 ready
[Ingest 14:09:02 INFO] Starting acquisition
[Status 14:09:03 INFO] reading housekeeping
[Status 14:09:20 INFO] acquire complete
[Status 14:09:21 INFO] writing housekeeping
[Sequencer 14:09:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:09:21 INFO] incremented U scene to 256 completed views
[Sequencer 14:09:21 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:09:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:09:21 INFO] incremented to [AERI set: name V256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:09:21 INFO] U256.SIG(18)
[sigmove 14:09:21 DEBUG] transformed U256Ma.SPC -> U256MA.SPC
[sigmove 14:09:21 DEBUG] transformed U256Mb.SPC -> U256MB.SPC
[sigmove 14:09:21 DEBUG] transformed U256Mc.SPC -> U256MC.SPC
[sigmove 14:09:21 DEBUG] transformed U256Md.SPC -> U256MD.SPC
[sigmove 14:09:21 DEBUG] transformed U256Me.SPC -> U256ME.SPC
[sigmove 14:09:21 DEBUG] transformed U256Mf.SPC -> U256MF.SPC
[Status 14:09:21 INFO] data for U256 transferred to science data processing
[Tidy 14:09:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:09:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:09:21 INFO] resetting WatchDogTimer
[Status 14:09:21 INFO] Starting Set [AERI set: name V256, 6 scans, 0 angle, D16300 command]
[Ingest 14:09:21 INFO] Sending XML status message
[Status 14:09:21 INFO] Mirror angle: 0
[Mirror 14:09:22 INFO] rotating to position V
[Status 14:09:22 INFO] .SET file for ACQ96 ready
[Ingest 14:09:22 INFO] Starting acquisition
[Status 14:09:23 INFO] reading housekeeping
[Status 14:09:40 INFO] acquire complete
[Status 14:09:41 INFO] writing housekeeping
[Sequencer 14:09:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:09:41 INFO] incremented V scene to 256 completed views
[Sequencer 14:09:41 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:09:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:09:41 INFO] incremented to [AERI set: name W256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:09:41 INFO] V256.SIG(18)
[sigmove 14:09:41 DEBUG] transformed V256Ma.SPC -> V256MA.SPC
[sigmove 14:09:41 DEBUG] transformed V256Mb.SPC -> V256MB.SPC
[sigmove 14:09:41 DEBUG] transformed V256Mc.SPC -> V256MC.SPC
[sigmove 14:09:41 DEBUG] transformed V256Md.SPC -> V256MD.SPC
[sigmove 14:09:41 DEBUG] transformed V256Me.SPC -> V256ME.SPC
[sigmove 14:09:41 DEBUG] transformed V256Mf.SPC -> V256MF.SPC
[Status 14:09:41 INFO] data for V256 transferred to science data processing
[Tidy 14:09:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:09:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:09:41 INFO] resetting WatchDogTimer
[Status 14:09:41 INFO] Starting Set [AERI set: name W256, 6 scans, 0 angle, D16300 command]
[Ingest 14:09:41 INFO] Sending XML status message
[Status 14:09:41 INFO] Mirror angle: 0
[Mirror 14:09:42 INFO] rotating to position W
[Status 14:09:42 INFO] .SET file for ACQ96 ready
[Ingest 14:09:42 INFO] Starting acquisition
[Status 14:09:43 INFO] reading housekeeping
[Status 14:10:00 INFO] acquire complete
[Status 14:10:01 INFO] writing housekeeping
[Sequencer 14:10:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:10:01 INFO] incremented W scene to 256 completed views
[Sequencer 14:10:01 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:10:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:10:01 INFO] incremented to [AERI set: name X256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:10:01 INFO] W256.SIG(18)
[sigmove 14:10:01 DEBUG] transformed W256Ma.SPC -> W256MA.SPC
[sigmove 14:10:01 DEBUG] transformed W256Mb.SPC -> W256MB.SPC
[sigmove 14:10:01 DEBUG] transformed W256Mc.SPC -> W256MC.SPC
[sigmove 14:10:01 DEBUG] transformed W256Md.SPC -> W256MD.SPC
[sigmove 14:10:01 DEBUG] transformed W256Me.SPC -> W256ME.SPC
[sigmove 14:10:01 DEBUG] transformed W256Mf.SPC -> W256MF.SPC
[Status 14:10:01 INFO] data for W256 transferred to science data processing
[Tidy 14:10:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:10:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:10:01 INFO] resetting WatchDogTimer
[Status 14:10:02 INFO] Starting Set [AERI set: name X256, 6 scans, 0 angle, D16300 command]
[Ingest 14:10:02 INFO] Sending XML status message
[Status 14:10:02 INFO] Mirror angle: 0
[Mirror 14:10:02 INFO] rotating to position X
[Status 14:10:02 INFO] .SET file for ACQ96 ready
[Ingest 14:10:03 INFO] Starting acquisition
[Status 14:10:03 INFO] reading housekeeping
[Status 14:10:21 INFO] acquire complete
[Status 14:10:21 INFO] writing housekeeping
[Sequencer 14:10:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:10:21 INFO] incremented X scene to 256 completed views
[Sequencer 14:10:21 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:10:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:10:21 INFO] incremented to [AERI set: name Y256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:10:21 INFO] X256.SIG(18)
[sigmove 14:10:21 DEBUG] transformed X256Ma.SPC -> X256MA.SPC
[sigmove 14:10:21 DEBUG] transformed X256Mb.SPC -> X256MB.SPC
[sigmove 14:10:21 DEBUG] transformed X256Mc.SPC -> X256MC.SPC
[sigmove 14:10:21 DEBUG] transformed X256Md.SPC -> X256MD.SPC
[sigmove 14:10:21 DEBUG] transformed X256Me.SPC -> X256ME.SPC
[sigmove 14:10:21 DEBUG] transformed X256Mf.SPC -> X256MF.SPC
[Status 14:10:21 INFO] data for X256 transferred to science data processing
[Tidy 14:10:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:10:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:10:21 INFO] resetting WatchDogTimer
[Status 14:10:22 INFO] Starting Set [AERI set: name Y256, 6 scans, 0 angle, D16300 command]
[Ingest 14:10:22 INFO] Sending XML status message
[Status 14:10:22 INFO] Mirror angle: 0
[Mirror 14:10:22 INFO] rotating to position Y
[Status 14:10:23 INFO] .SET file for ACQ96 ready
[Ingest 14:10:23 INFO] Starting acquisition
[Status 14:10:23 INFO] reading housekeeping
[Status 14:10:41 INFO] acquire complete
[Status 14:10:42 INFO] writing housekeeping
[Sequencer 14:10:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:10:42 INFO] incremented Y scene to 256 completed views
[Sequencer 14:10:42 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:10:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:10:42 INFO] incremented to [AERI set: name Z256, 6 scans, 0 angle, D16300 command] set
[sigmove 14:10:42 INFO] Y256.SIG(18)
[sigmove 14:10:42 DEBUG] transformed Y256Ma.SPC -> Y256MA.SPC
[sigmove 14:10:42 DEBUG] transformed Y256Mb.SPC -> Y256MB.SPC
[sigmove 14:10:42 DEBUG] transformed Y256Mc.SPC -> Y256MC.SPC
[sigmove 14:10:42 DEBUG] transformed Y256Md.SPC -> Y256MD.SPC
[sigmove 14:10:42 DEBUG] transformed Y256Me.SPC -> Y256ME.SPC
[sigmove 14:10:42 DEBUG] transformed Y256Mf.SPC -> Y256MF.SPC
[Status 14:10:42 INFO] data for Y256 transferred to science data processing
[Tidy 14:10:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:10:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:10:42 INFO] resetting WatchDogTimer
[Status 14:10:42 INFO] Starting Set [AERI set: name Z256, 6 scans, 0 angle, D16300 command]
[Ingest 14:10:42 INFO] Sending XML status message
[Status 14:10:42 INFO] Mirror angle: 0
[Mirror 14:10:42 INFO] rotating to position Z
[Status 14:10:43 INFO] .SET file for ACQ96 ready
[Ingest 14:10:43 INFO] Starting acquisition
[Status 14:10:43 INFO] reading housekeeping
[Status 14:11:01 INFO] acquire complete
[Status 14:11:02 INFO] writing housekeeping
[Sequencer 14:11:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:11:02 INFO] incremented Z scene to 256 completed views
[Sequencer 14:11:02 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:11:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:11:02 INFO] incremented to [AERI set: name H257, 6 scans, 60 angle, D22500 command] set
[sigmove 14:11:02 INFO] Z256.SIG(18)
[sigmove 14:11:02 DEBUG] transformed Z256Ma.SPC -> Z256MA.SPC
[sigmove 14:11:02 DEBUG] transformed Z256Mb.SPC -> Z256MB.SPC
[sigmove 14:11:02 DEBUG] transformed Z256Mc.SPC -> Z256MC.SPC
[sigmove 14:11:02 DEBUG] transformed Z256Md.SPC -> Z256MD.SPC
[sigmove 14:11:02 DEBUG] transformed Z256Me.SPC -> Z256ME.SPC
[sigmove 14:11:02 DEBUG] transformed Z256Mf.SPC -> Z256MF.SPC
[Status 14:11:02 INFO] data for Z256 transferred to science data processing
[Tidy 14:11:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:11:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:11:02 INFO] resetting WatchDogTimer
[Status 14:11:02 INFO] Starting Set [AERI set: name H257, 6 scans, 60 angle, D22500 command]
[Ingest 14:11:02 INFO] Sending XML status message
[Status 14:11:02 INFO] Mirror angle: 60
[Mirror 14:11:03 INFO] rotating to position H
[Status 14:11:04 INFO] .SET file for ACQ96 ready
[Ingest 14:11:04 INFO] Starting acquisition
[Status 14:11:04 INFO] reading housekeeping
[Status 14:11:22 INFO] acquire complete
[Status 14:11:23 INFO] writing housekeeping
[Sequencer 14:11:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:11:23 INFO] incremented H scene to 257 completed views
[Sequencer 14:11:23 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:11:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:11:23 INFO] incremented to [AERI set: name A257, 6 scans, 120 angle, D28300 command] set
[sigmove 14:11:23 INFO] H257.SIG(18)
[sigmove 14:11:23 DEBUG] transformed H257Ma.SPC -> H257MA.SPC
[sigmove 14:11:23 DEBUG] transformed H257Mb.SPC -> H257MB.SPC
[sigmove 14:11:23 DEBUG] transformed H257Mc.SPC -> H257MC.SPC
[sigmove 14:11:23 DEBUG] transformed H257Md.SPC -> H257MD.SPC
[sigmove 14:11:23 DEBUG] transformed H257Me.SPC -> H257ME.SPC
[sigmove 14:11:23 DEBUG] transformed H257Mf.SPC -> H257MF.SPC
[Status 14:11:23 INFO] data for H257 transferred to science data processing
[Tidy 14:11:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:11:23 INFO] A255.FIN(19),H255.FIN(19),S255.FIN(19),T255.FIN(19),U255.FIN(19),V255.FIN(19),W255.FIN(19),X255.FIN(19),Y255.FIN(19),Z255.FIN(19),A256.FIN(19),H256.FIN(19),S256.FIN(19),T256.FIN(19),U256.FIN(19),V256.FIN(19),W256.FIN(19),X256.FIN(19),Y256.FIN(19),Z256.FIN(19)
[sigmove 14:11:23 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:11:23 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:11:28 DEBUG] done zipping
[WatchDog 14:11:28 INFO] resetting WatchDogTimer
[Status 14:11:28 INFO] Starting Set [AERI set: name A257, 6 scans, 120 angle, D28300 command]
[Ingest 14:11:28 INFO] Sending XML status message
[Status 14:11:28 INFO] Mirror angle: 120
[Mirror 14:11:29 INFO] rotating to position A
[Status 14:11:30 INFO] .SET file for ACQ96 ready
[Ingest 14:11:30 INFO] Starting acquisition
[Status 14:11:30 INFO] reading housekeeping
[Status 14:11:48 INFO] acquire complete
[Status 14:11:49 INFO] writing housekeeping
[Sequencer 14:11:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:11:49 INFO] incremented A scene to 257 completed views
[Sequencer 14:11:49 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:11:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:11:49 INFO] incremented to [AERI set: name S257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:11:49 INFO] A257.SIG(18)
[sigmove 14:11:49 DEBUG] transformed A257Ma.SPC -> A257MA.SPC
[sigmove 14:11:49 DEBUG] transformed A257Mb.SPC -> A257MB.SPC
[sigmove 14:11:49 DEBUG] transformed A257Mc.SPC -> A257MC.SPC
[sigmove 14:11:49 DEBUG] transformed A257Md.SPC -> A257MD.SPC
[sigmove 14:11:49 DEBUG] transformed A257Me.SPC -> A257ME.SPC
[sigmove 14:11:49 DEBUG] transformed A257Mf.SPC -> A257MF.SPC
[Status 14:11:49 INFO] data for A257 transferred to science data processing
[Tidy 14:11:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:11:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:11:49 INFO] resetting WatchDogTimer
[Status 14:11:49 INFO] Starting Set [AERI set: name S257, 6 scans, 0 angle, D16300 command]
[Ingest 14:11:49 INFO] Sending XML status message
[Status 14:11:49 INFO] Mirror angle: 0
[Mirror 14:11:50 INFO] rotating to position S
[Status 14:11:51 INFO] .SET file for ACQ96 ready
[Ingest 14:11:51 INFO] Starting acquisition
[Status 14:11:52 INFO] reading housekeeping
[Status 14:12:09 INFO] acquire complete
[Status 14:12:10 INFO] writing housekeeping
[Sequencer 14:12:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:12:10 INFO] incremented S scene to 257 completed views
[Sequencer 14:12:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:12:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:12:10 INFO] incremented to [AERI set: name T257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:12:10 INFO] S257.SIG(18)
[sigmove 14:12:10 DEBUG] transformed S257Ma.SPC -> S257MA.SPC
[sigmove 14:12:10 DEBUG] transformed S257Mb.SPC -> S257MB.SPC
[sigmove 14:12:10 DEBUG] transformed S257Mc.SPC -> S257MC.SPC
[sigmove 14:12:10 DEBUG] transformed S257Md.SPC -> S257MD.SPC
[sigmove 14:12:10 DEBUG] transformed S257Me.SPC -> S257ME.SPC
[sigmove 14:12:10 DEBUG] transformed S257Mf.SPC -> S257MF.SPC
[Status 14:12:10 INFO] data for S257 transferred to science data processing
[Tidy 14:12:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:12:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:12:10 INFO] resetting WatchDogTimer
[Status 14:12:11 INFO] Starting Set [AERI set: name T257, 6 scans, 0 angle, D16300 command]
[Ingest 14:12:11 INFO] Sending XML status message
[Status 14:12:11 INFO] Mirror angle: 0
[Mirror 14:12:11 INFO] rotating to position T
[Status 14:12:11 INFO] .SET file for ACQ96 ready
[Ingest 14:12:12 INFO] Starting acquisition
[Status 14:12:12 INFO] reading housekeeping
[Status 14:12:30 INFO] acquire complete
[Status 14:12:30 INFO] writing housekeeping
[Sequencer 14:12:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:12:30 INFO] incremented T scene to 257 completed views
[Sequencer 14:12:30 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:12:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:12:30 INFO] incremented to [AERI set: name U257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:12:30 INFO] T257.SIG(18)
[sigmove 14:12:30 DEBUG] transformed T257Ma.SPC -> T257MA.SPC
[sigmove 14:12:30 DEBUG] transformed T257Mb.SPC -> T257MB.SPC
[sigmove 14:12:30 DEBUG] transformed T257Mc.SPC -> T257MC.SPC
[sigmove 14:12:30 DEBUG] transformed T257Md.SPC -> T257MD.SPC
[sigmove 14:12:30 DEBUG] transformed T257Me.SPC -> T257ME.SPC
[sigmove 14:12:30 DEBUG] transformed T257Mf.SPC -> T257MF.SPC
[Status 14:12:30 INFO] data for T257 transferred to science data processing
[Tidy 14:12:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:12:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:12:30 INFO] resetting WatchDogTimer
[Status 14:12:31 INFO] Starting Set [AERI set: name U257, 6 scans, 0 angle, D16300 command]
[Ingest 14:12:31 INFO] Sending XML status message
[Status 14:12:31 INFO] Mirror angle: 0
[Mirror 14:12:31 INFO] rotating to position U
[Status 14:12:32 INFO] .SET file for ACQ96 ready
[Ingest 14:12:32 INFO] Starting acquisition
[Status 14:12:33 INFO] reading housekeeping
[Status 14:12:51 INFO] acquire complete
[Status 14:12:52 INFO] writing housekeeping
[Sequencer 14:12:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:12:52 INFO] incremented U scene to 257 completed views
[Sequencer 14:12:52 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:12:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:12:52 INFO] incremented to [AERI set: name V257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:12:52 INFO] U257.SIG(18)
[sigmove 14:12:52 DEBUG] transformed U257Ma.SPC -> U257MA.SPC
[sigmove 14:12:52 DEBUG] transformed U257Mb.SPC -> U257MB.SPC
[sigmove 14:12:52 DEBUG] transformed U257Mc.SPC -> U257MC.SPC
[sigmove 14:12:52 DEBUG] transformed U257Md.SPC -> U257MD.SPC
[sigmove 14:12:52 DEBUG] transformed U257Me.SPC -> U257ME.SPC
[sigmove 14:12:52 DEBUG] transformed U257Mf.SPC -> U257MF.SPC
[Status 14:12:52 INFO] data for U257 transferred to science data processing
[Tidy 14:12:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:12:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:12:52 INFO] resetting WatchDogTimer
[Status 14:12:52 INFO] Starting Set [AERI set: name V257, 6 scans, 0 angle, D16300 command]
[Ingest 14:12:52 INFO] Sending XML status message
[Status 14:12:52 INFO] Mirror angle: 0
[Mirror 14:12:52 INFO] rotating to position V
[Status 14:12:53 INFO] .SET file for ACQ96 ready
[Ingest 14:12:53 INFO] Starting acquisition
[Status 14:12:54 INFO] reading housekeeping
[Status 14:13:11 INFO] acquire complete
[Status 14:13:12 INFO] writing housekeeping
[Sequencer 14:13:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:13:12 INFO] incremented V scene to 257 completed views
[Sequencer 14:13:12 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:13:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:13:12 INFO] incremented to [AERI set: name W257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:13:12 INFO] V257.SIG(18)
[sigmove 14:13:12 DEBUG] transformed V257Ma.SPC -> V257MA.SPC
[sigmove 14:13:12 DEBUG] transformed V257Mb.SPC -> V257MB.SPC
[sigmove 14:13:12 DEBUG] transformed V257Mc.SPC -> V257MC.SPC
[sigmove 14:13:12 DEBUG] transformed V257Md.SPC -> V257MD.SPC
[sigmove 14:13:12 DEBUG] transformed V257Me.SPC -> V257ME.SPC
[sigmove 14:13:12 DEBUG] transformed V257Mf.SPC -> V257MF.SPC
[Status 14:13:12 INFO] data for V257 transferred to science data processing
[Tidy 14:13:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:13:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:13:12 INFO] resetting WatchDogTimer
[Status 14:13:12 INFO] Starting Set [AERI set: name W257, 6 scans, 0 angle, D16300 command]
[Ingest 14:13:12 INFO] Sending XML status message
[Status 14:13:12 INFO] Mirror angle: 0
[Mirror 14:13:13 INFO] rotating to position W
[Status 14:13:13 INFO] .SET file for ACQ96 ready
[Ingest 14:13:13 INFO] Starting acquisition
[Status 14:13:14 INFO] reading housekeeping
[Status 14:13:31 INFO] acquire complete
[Status 14:13:32 INFO] writing housekeeping
[Sequencer 14:13:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:13:32 INFO] incremented W scene to 257 completed views
[Sequencer 14:13:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:13:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:13:32 INFO] incremented to [AERI set: name X257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:13:32 INFO] W257.SIG(18)
[sigmove 14:13:32 DEBUG] transformed W257Ma.SPC -> W257MA.SPC
[sigmove 14:13:32 DEBUG] transformed W257Mb.SPC -> W257MB.SPC
[sigmove 14:13:32 DEBUG] transformed W257Mc.SPC -> W257MC.SPC
[sigmove 14:13:32 DEBUG] transformed W257Md.SPC -> W257MD.SPC
[sigmove 14:13:32 DEBUG] transformed W257Me.SPC -> W257ME.SPC
[sigmove 14:13:32 DEBUG] transformed W257Mf.SPC -> W257MF.SPC
[Status 14:13:32 INFO] data for W257 transferred to science data processing
[Tidy 14:13:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:13:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:13:32 INFO] resetting WatchDogTimer
[Status 14:13:33 INFO] Starting Set [AERI set: name X257, 6 scans, 0 angle, D16300 command]
[Ingest 14:13:33 INFO] Sending XML status message
[Status 14:13:33 INFO] Mirror angle: 0
[Mirror 14:13:33 INFO] rotating to position X
[Status 14:13:33 INFO] .SET file for ACQ96 ready
[Ingest 14:13:34 INFO] Starting acquisition
[Status 14:13:34 INFO] reading housekeeping
[Status 14:13:51 INFO] acquire complete
[Status 14:13:52 INFO] writing housekeeping
[Sequencer 14:13:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:13:52 INFO] incremented X scene to 257 completed views
[Sequencer 14:13:52 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:13:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:13:52 INFO] incremented to [AERI set: name Y257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:13:52 INFO] X257.SIG(18)
[sigmove 14:13:52 DEBUG] transformed X257Ma.SPC -> X257MA.SPC
[sigmove 14:13:52 DEBUG] transformed X257Mb.SPC -> X257MB.SPC
[sigmove 14:13:52 DEBUG] transformed X257Mc.SPC -> X257MC.SPC
[sigmove 14:13:52 DEBUG] transformed X257Md.SPC -> X257MD.SPC
[sigmove 14:13:52 DEBUG] transformed X257Me.SPC -> X257ME.SPC
[sigmove 14:13:52 DEBUG] transformed X257Mf.SPC -> X257MF.SPC
[Status 14:13:52 INFO] data for X257 transferred to science data processing
[Tidy 14:13:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:13:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:13:52 INFO] resetting WatchDogTimer
[Status 14:13:53 INFO] Starting Set [AERI set: name Y257, 6 scans, 0 angle, D16300 command]
[Ingest 14:13:53 INFO] Sending XML status message
[Status 14:13:53 INFO] Mirror angle: 0
[Mirror 14:13:53 INFO] rotating to position Y
[Status 14:13:53 INFO] .SET file for ACQ96 ready
[Ingest 14:13:54 INFO] Starting acquisition
[Status 14:13:54 INFO] reading housekeeping
[Status 14:14:12 INFO] acquire complete
[Status 14:14:13 INFO] writing housekeeping
[Sequencer 14:14:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:14:13 INFO] incremented Y scene to 257 completed views
[Sequencer 14:14:13 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:14:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:14:13 INFO] incremented to [AERI set: name Z257, 6 scans, 0 angle, D16300 command] set
[sigmove 14:14:13 INFO] Y257.SIG(18)
[sigmove 14:14:13 DEBUG] transformed Y257Ma.SPC -> Y257MA.SPC
[sigmove 14:14:13 DEBUG] transformed Y257Mb.SPC -> Y257MB.SPC
[sigmove 14:14:13 DEBUG] transformed Y257Mc.SPC -> Y257MC.SPC
[sigmove 14:14:13 DEBUG] transformed Y257Md.SPC -> Y257MD.SPC
[sigmove 14:14:13 DEBUG] transformed Y257Me.SPC -> Y257ME.SPC
[sigmove 14:14:13 DEBUG] transformed Y257Mf.SPC -> Y257MF.SPC
[Status 14:14:13 INFO] data for Y257 transferred to science data processing
[Tidy 14:14:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:14:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:14:13 INFO] resetting WatchDogTimer
[Status 14:14:13 INFO] Starting Set [AERI set: name Z257, 6 scans, 0 angle, D16300 command]
[Ingest 14:14:13 INFO] Sending XML status message
[Status 14:14:13 INFO] Mirror angle: 0
[Mirror 14:14:13 INFO] rotating to position Z
[Status 14:14:14 INFO] .SET file for ACQ96 ready
[Ingest 14:14:14 INFO] Starting acquisition
[Status 14:14:14 INFO] reading housekeeping
[Status 14:14:32 INFO] acquire complete
[Status 14:14:33 INFO] writing housekeeping
[Sequencer 14:14:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:14:33 INFO] incremented Z scene to 257 completed views
[Sequencer 14:14:33 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:14:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:14:33 INFO] incremented to [AERI set: name A258, 6 scans, 120 angle, D28300 command] set
[sigmove 14:14:33 INFO] Z257.SIG(18)
[sigmove 14:14:33 DEBUG] transformed Z257Ma.SPC -> Z257MA.SPC
[sigmove 14:14:33 DEBUG] transformed Z257Mb.SPC -> Z257MB.SPC
[sigmove 14:14:33 DEBUG] transformed Z257Mc.SPC -> Z257MC.SPC
[sigmove 14:14:33 DEBUG] transformed Z257Md.SPC -> Z257MD.SPC
[sigmove 14:14:33 DEBUG] transformed Z257Me.SPC -> Z257ME.SPC
[sigmove 14:14:33 DEBUG] transformed Z257Mf.SPC -> Z257MF.SPC
[Status 14:14:33 INFO] data for Z257 transferred to science data processing
[Tidy 14:14:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:14:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:14:33 INFO] resetting WatchDogTimer
[Status 14:14:33 INFO] Starting Set [AERI set: name A258, 6 scans, 120 angle, D28300 command]
[Ingest 14:14:33 INFO] Sending XML status message
[Status 14:14:33 INFO] Mirror angle: 120
[Mirror 14:14:33 INFO] rotating to position A
[Status 14:14:35 INFO] .SET file for ACQ96 ready
[Ingest 14:14:35 INFO] Starting acquisition
[Status 14:14:36 INFO] reading housekeeping
[Status 14:14:53 INFO] acquire complete
[Status 14:14:54 INFO] writing housekeeping
[Sequencer 14:14:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:14:54 INFO] incremented A scene to 258 completed views
[Sequencer 14:14:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:14:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:14:54 INFO] incremented to [AERI set: name H258, 6 scans, 60 angle, D22500 command] set
[sigmove 14:14:54 INFO] A258.SIG(18)
[sigmove 14:14:54 DEBUG] transformed A258Ma.SPC -> A258MA.SPC
[sigmove 14:14:54 DEBUG] transformed A258Mb.SPC -> A258MB.SPC
[sigmove 14:14:54 DEBUG] transformed A258Mc.SPC -> A258MC.SPC
[sigmove 14:14:54 DEBUG] transformed A258Md.SPC -> A258MD.SPC
[sigmove 14:14:54 DEBUG] transformed A258Me.SPC -> A258ME.SPC
[sigmove 14:14:54 DEBUG] transformed A258Mf.SPC -> A258MF.SPC
[Status 14:14:54 INFO] data for A258 transferred to science data processing
[Tidy 14:14:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:14:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:14:54 INFO] resetting WatchDogTimer
[Status 14:14:54 INFO] Starting Set [AERI set: name H258, 6 scans, 60 angle, D22500 command]
[Ingest 14:14:54 INFO] Sending XML status message
[Status 14:14:54 INFO] Mirror angle: 60
[Mirror 14:14:55 INFO] rotating to position H
[Status 14:14:56 INFO] .SET file for ACQ96 ready
[Ingest 14:14:56 INFO] Starting acquisition
[Status 14:14:56 INFO] reading housekeeping
[Status 14:15:14 INFO] acquire complete
[Status 14:15:15 INFO] writing housekeeping
[Sequencer 14:15:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:15:15 INFO] incremented H scene to 258 completed views
[Sequencer 14:15:15 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:15:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:15:15 INFO] incremented to [AERI set: name S258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:15:15 INFO] H258.SIG(18)
[sigmove 14:15:15 DEBUG] transformed H258Ma.SPC -> H258MA.SPC
[sigmove 14:15:15 DEBUG] transformed H258Mb.SPC -> H258MB.SPC
[sigmove 14:15:15 DEBUG] transformed H258Mc.SPC -> H258MC.SPC
[sigmove 14:15:15 DEBUG] transformed H258Md.SPC -> H258MD.SPC
[sigmove 14:15:15 DEBUG] transformed H258Me.SPC -> H258ME.SPC
[sigmove 14:15:15 DEBUG] transformed H258Mf.SPC -> H258MF.SPC
[Status 14:15:15 INFO] data for H258 transferred to science data processing
[Tidy 14:15:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:15:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:15:15 INFO] resetting WatchDogTimer
[Status 14:15:16 INFO] Starting Set [AERI set: name S258, 6 scans, 0 angle, D16300 command]
[Ingest 14:15:16 INFO] Sending XML status message
[Status 14:15:16 INFO] Mirror angle: 0
[Mirror 14:15:16 INFO] rotating to position S
[Status 14:15:17 INFO] .SET file for ACQ96 ready
[Ingest 14:15:17 INFO] Starting acquisition
[Status 14:15:18 INFO] reading housekeeping
[Status 14:15:36 INFO] acquire complete
[Status 14:15:37 INFO] writing housekeeping
[Sequencer 14:15:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:15:37 INFO] incremented S scene to 258 completed views
[Sequencer 14:15:37 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:15:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:15:37 INFO] incremented to [AERI set: name T258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:15:37 INFO] S258.SIG(18)
[sigmove 14:15:37 DEBUG] transformed S258Ma.SPC -> S258MA.SPC
[sigmove 14:15:37 DEBUG] transformed S258Mb.SPC -> S258MB.SPC
[sigmove 14:15:37 DEBUG] transformed S258Mc.SPC -> S258MC.SPC
[sigmove 14:15:37 DEBUG] transformed S258Md.SPC -> S258MD.SPC
[sigmove 14:15:37 DEBUG] transformed S258Me.SPC -> S258ME.SPC
[sigmove 14:15:37 DEBUG] transformed S258Mf.SPC -> S258MF.SPC
[Status 14:15:37 INFO] data for S258 transferred to science data processing
[Tidy 14:15:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:15:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:15:37 INFO] resetting WatchDogTimer
[Status 14:15:37 INFO] Starting Set [AERI set: name T258, 6 scans, 0 angle, D16300 command]
[Ingest 14:15:37 INFO] Sending XML status message
[Status 14:15:37 INFO] Mirror angle: 0
[Mirror 14:15:37 INFO] rotating to position T
[Status 14:15:38 INFO] .SET file for ACQ96 ready
[Ingest 14:15:38 INFO] Starting acquisition
[Status 14:15:39 INFO] reading housekeeping
[Status 14:15:56 INFO] acquire complete
[Status 14:15:57 INFO] writing housekeeping
[Sequencer 14:15:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:15:57 INFO] incremented T scene to 258 completed views
[Sequencer 14:15:57 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:15:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:15:57 INFO] incremented to [AERI set: name U258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:15:57 INFO] T258.SIG(18)
[sigmove 14:15:57 DEBUG] transformed T258Ma.SPC -> T258MA.SPC
[sigmove 14:15:57 DEBUG] transformed T258Mb.SPC -> T258MB.SPC
[sigmove 14:15:57 DEBUG] transformed T258Mc.SPC -> T258MC.SPC
[sigmove 14:15:57 DEBUG] transformed T258Md.SPC -> T258MD.SPC
[sigmove 14:15:57 DEBUG] transformed T258Me.SPC -> T258ME.SPC
[sigmove 14:15:57 DEBUG] transformed T258Mf.SPC -> T258MF.SPC
[Status 14:15:57 INFO] data for T258 transferred to science data processing
[Tidy 14:15:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:15:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:15:57 INFO] resetting WatchDogTimer
[Status 14:15:57 INFO] Starting Set [AERI set: name U258, 6 scans, 0 angle, D16300 command]
[Ingest 14:15:57 INFO] Sending XML status message
[Status 14:15:57 INFO] Mirror angle: 0
[Mirror 14:15:58 INFO] rotating to position U
[Status 14:15:58 INFO] .SET file for ACQ96 ready
[Ingest 14:15:58 INFO] Starting acquisition
[Status 14:15:59 INFO] reading housekeeping
[Status 14:16:16 INFO] acquire complete
[Status 14:16:17 INFO] writing housekeeping
[Sequencer 14:16:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:16:17 INFO] incremented U scene to 258 completed views
[Sequencer 14:16:17 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:16:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:16:17 INFO] incremented to [AERI set: name V258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:16:17 INFO] U258.SIG(18)
[sigmove 14:16:17 DEBUG] transformed U258Ma.SPC -> U258MA.SPC
[sigmove 14:16:17 DEBUG] transformed U258Mb.SPC -> U258MB.SPC
[sigmove 14:16:17 DEBUG] transformed U258Mc.SPC -> U258MC.SPC
[sigmove 14:16:17 DEBUG] transformed U258Md.SPC -> U258MD.SPC
[sigmove 14:16:17 DEBUG] transformed U258Me.SPC -> U258ME.SPC
[sigmove 14:16:17 DEBUG] transformed U258Mf.SPC -> U258MF.SPC
[Status 14:16:17 INFO] data for U258 transferred to science data processing
[Tidy 14:16:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:16:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:16:17 INFO] resetting WatchDogTimer
[Status 14:16:17 INFO] Starting Set [AERI set: name V258, 6 scans, 0 angle, D16300 command]
[Ingest 14:16:17 INFO] Sending XML status message
[Status 14:16:17 INFO] Mirror angle: 0
[Mirror 14:16:18 INFO] rotating to position V
[Status 14:16:18 INFO] .SET file for ACQ96 ready
[Ingest 14:16:19 INFO] Starting acquisition
[Status 14:16:19 INFO] reading housekeeping
[Status 14:16:36 INFO] acquire complete
[Status 14:16:37 INFO] writing housekeeping
[Sequencer 14:16:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:16:37 INFO] incremented V scene to 258 completed views
[Sequencer 14:16:37 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:16:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:16:37 INFO] incremented to [AERI set: name W258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:16:37 INFO] V258.SIG(18)
[sigmove 14:16:37 DEBUG] transformed V258Ma.SPC -> V258MA.SPC
[sigmove 14:16:37 DEBUG] transformed V258Mb.SPC -> V258MB.SPC
[sigmove 14:16:37 DEBUG] transformed V258Mc.SPC -> V258MC.SPC
[sigmove 14:16:37 DEBUG] transformed V258Md.SPC -> V258MD.SPC
[sigmove 14:16:37 DEBUG] transformed V258Me.SPC -> V258ME.SPC
[sigmove 14:16:37 DEBUG] transformed V258Mf.SPC -> V258MF.SPC
[Status 14:16:37 INFO] data for V258 transferred to science data processing
[Tidy 14:16:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:16:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:16:37 INFO] resetting WatchDogTimer
[Status 14:16:38 INFO] Starting Set [AERI set: name W258, 6 scans, 0 angle, D16300 command]
[Ingest 14:16:38 INFO] Sending XML status message
[Status 14:16:38 INFO] Mirror angle: 0
[Mirror 14:16:38 INFO] rotating to position W
[Status 14:16:38 INFO] .SET file for ACQ96 ready
[Ingest 14:16:39 INFO] Starting acquisition
[Status 14:16:39 INFO] reading housekeeping
[Status 14:16:57 INFO] acquire complete
[Status 14:16:57 INFO] writing housekeeping
[Sequencer 14:16:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:16:57 INFO] incremented W scene to 258 completed views
[Sequencer 14:16:57 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:16:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:16:57 INFO] incremented to [AERI set: name X258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:16:57 INFO] W258.SIG(18)
[sigmove 14:16:57 DEBUG] transformed W258Ma.SPC -> W258MA.SPC
[sigmove 14:16:57 DEBUG] transformed W258Mb.SPC -> W258MB.SPC
[sigmove 14:16:57 DEBUG] transformed W258Mc.SPC -> W258MC.SPC
[sigmove 14:16:57 DEBUG] transformed W258Md.SPC -> W258MD.SPC
[sigmove 14:16:57 DEBUG] transformed W258Me.SPC -> W258ME.SPC
[sigmove 14:16:57 DEBUG] transformed W258Mf.SPC -> W258MF.SPC
[Status 14:16:57 INFO] data for W258 transferred to science data processing
[Tidy 14:16:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:16:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:16:57 INFO] resetting WatchDogTimer
[Status 14:16:58 INFO] Starting Set [AERI set: name X258, 6 scans, 0 angle, D16300 command]
[Ingest 14:16:58 INFO] Sending XML status message
[Status 14:16:58 INFO] Mirror angle: 0
[Mirror 14:16:58 INFO] rotating to position X
[Status 14:16:59 INFO] .SET file for ACQ96 ready
[Ingest 14:16:59 INFO] Starting acquisition
[Status 14:16:59 INFO] reading housekeeping
[Status 14:17:17 INFO] acquire complete
[Status 14:17:18 INFO] writing housekeeping
[Sequencer 14:17:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:17:18 INFO] incremented X scene to 258 completed views
[Sequencer 14:17:18 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:17:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:17:18 INFO] incremented to [AERI set: name Y258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:17:18 INFO] X258.SIG(18)
[sigmove 14:17:18 DEBUG] transformed X258Ma.SPC -> X258MA.SPC
[sigmove 14:17:18 DEBUG] transformed X258Mb.SPC -> X258MB.SPC
[sigmove 14:17:18 DEBUG] transformed X258Mc.SPC -> X258MC.SPC
[sigmove 14:17:18 DEBUG] transformed X258Md.SPC -> X258MD.SPC
[sigmove 14:17:18 DEBUG] transformed X258Me.SPC -> X258ME.SPC
[sigmove 14:17:18 DEBUG] transformed X258Mf.SPC -> X258MF.SPC
[Status 14:17:18 INFO] data for X258 transferred to science data processing
[Tidy 14:17:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:17:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:17:18 INFO] resetting WatchDogTimer
[Status 14:17:18 INFO] Starting Set [AERI set: name Y258, 6 scans, 0 angle, D16300 command]
[Ingest 14:17:18 INFO] Sending XML status message
[Status 14:17:18 INFO] Mirror angle: 0
[Mirror 14:17:18 INFO] rotating to position Y
[Status 14:17:19 INFO] .SET file for ACQ96 ready
[Ingest 14:17:19 INFO] Starting acquisition
[Status 14:17:19 INFO] reading housekeeping
[Status 14:17:37 INFO] acquire complete
[Status 14:17:38 INFO] writing housekeeping
[Sequencer 14:17:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:17:38 INFO] incremented Y scene to 258 completed views
[Sequencer 14:17:38 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:17:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:17:38 INFO] incremented to [AERI set: name Z258, 6 scans, 0 angle, D16300 command] set
[sigmove 14:17:38 INFO] Y258.SIG(18)
[sigmove 14:17:38 DEBUG] transformed Y258Ma.SPC -> Y258MA.SPC
[sigmove 14:17:38 DEBUG] transformed Y258Mb.SPC -> Y258MB.SPC
[sigmove 14:17:38 DEBUG] transformed Y258Mc.SPC -> Y258MC.SPC
[sigmove 14:17:38 DEBUG] transformed Y258Md.SPC -> Y258MD.SPC
[sigmove 14:17:38 DEBUG] transformed Y258Me.SPC -> Y258ME.SPC
[sigmove 14:17:38 DEBUG] transformed Y258Mf.SPC -> Y258MF.SPC
[Status 14:17:38 INFO] data for Y258 transferred to science data processing
[Tidy 14:17:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:17:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:17:38 INFO] resetting WatchDogTimer
[Status 14:17:38 INFO] Starting Set [AERI set: name Z258, 6 scans, 0 angle, D16300 command]
[Ingest 14:17:38 INFO] Sending XML status message
[Status 14:17:38 INFO] Mirror angle: 0
[Mirror 14:17:39 INFO] rotating to position Z
[Status 14:17:39 INFO] .SET file for ACQ96 ready
[Ingest 14:17:39 INFO] Starting acquisition
[Status 14:17:40 INFO] reading housekeeping
[Status 14:17:57 INFO] acquire complete
[Status 14:17:58 INFO] writing housekeeping
[Sequencer 14:17:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:17:58 INFO] incremented Z scene to 258 completed views
[Sequencer 14:17:58 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:17:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:17:58 INFO] incremented to [AERI set: name H259, 6 scans, 60 angle, D22500 command] set
[sigmove 14:17:58 INFO] Z258.SIG(18)
[sigmove 14:17:58 DEBUG] transformed Z258Ma.SPC -> Z258MA.SPC
[sigmove 14:17:58 DEBUG] transformed Z258Mb.SPC -> Z258MB.SPC
[sigmove 14:17:58 DEBUG] transformed Z258Mc.SPC -> Z258MC.SPC
[sigmove 14:17:58 DEBUG] transformed Z258Md.SPC -> Z258MD.SPC
[sigmove 14:17:58 DEBUG] transformed Z258Me.SPC -> Z258ME.SPC
[sigmove 14:17:58 DEBUG] transformed Z258Mf.SPC -> Z258MF.SPC
[Status 14:17:58 INFO] data for Z258 transferred to science data processing
[Tidy 14:17:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:17:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:17:58 INFO] resetting WatchDogTimer
[Status 14:17:58 INFO] Starting Set [AERI set: name H259, 6 scans, 60 angle, D22500 command]
[Ingest 14:17:58 INFO] Sending XML status message
[Status 14:17:58 INFO] Mirror angle: 60
[Mirror 14:17:59 INFO] rotating to position H
[Status 14:18:00 INFO] .SET file for ACQ96 ready
[Ingest 14:18:00 INFO] Starting acquisition
[Status 14:18:00 INFO] reading housekeeping
[Status 14:18:18 INFO] acquire complete
[Status 14:18:19 INFO] writing housekeeping
[Sequencer 14:18:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:18:19 INFO] incremented H scene to 259 completed views
[Sequencer 14:18:19 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:18:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:18:19 INFO] incremented to [AERI set: name A259, 6 scans, 120 angle, D28300 command] set
[sigmove 14:18:19 INFO] H259.SIG(18)
[sigmove 14:18:19 DEBUG] transformed H259Ma.SPC -> H259MA.SPC
[sigmove 14:18:19 DEBUG] transformed H259Mb.SPC -> H259MB.SPC
[sigmove 14:18:19 DEBUG] transformed H259Mc.SPC -> H259MC.SPC
[sigmove 14:18:19 DEBUG] transformed H259Md.SPC -> H259MD.SPC
[sigmove 14:18:19 DEBUG] transformed H259Me.SPC -> H259ME.SPC
[sigmove 14:18:19 DEBUG] transformed H259Mf.SPC -> H259MF.SPC
[Status 14:18:19 INFO] data for H259 transferred to science data processing
[Tidy 14:18:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:18:19 INFO] A257.FIN(19),H257.FIN(19),S257.FIN(19),T257.FIN(19),U257.FIN(19),V257.FIN(19),W257.FIN(19),X257.FIN(19),Y257.FIN(19),Z257.FIN(19),A258.FIN(19),H258.FIN(19),S258.FIN(19),T258.FIN(19),U258.FIN(19),V258.FIN(19),W258.FIN(19),X258.FIN(19),Y258.FIN(19),Z258.FIN(19)
[sigmove 14:18:19 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:18:19 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:18:24 DEBUG] done zipping
[WatchDog 14:18:24 INFO] resetting WatchDogTimer
[Status 14:18:25 INFO] Starting Set [AERI set: name A259, 6 scans, 120 angle, D28300 command]
[Ingest 14:18:25 INFO] Sending XML status message
[Status 14:18:25 INFO] Mirror angle: 120
[Mirror 14:18:25 INFO] rotating to position A
[Status 14:18:26 INFO] .SET file for ACQ96 ready
[Ingest 14:18:27 INFO] Starting acquisition
[Status 14:18:27 INFO] reading housekeeping
[Status 14:18:45 INFO] acquire complete
[Status 14:18:46 INFO] writing housekeeping
[Sequencer 14:18:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:18:46 INFO] incremented A scene to 259 completed views
[Sequencer 14:18:46 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:18:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:18:46 INFO] incremented to [AERI set: name S259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:18:46 INFO] A259.SIG(18)
[sigmove 14:18:46 DEBUG] transformed A259Ma.SPC -> A259MA.SPC
[sigmove 14:18:46 DEBUG] transformed A259Mb.SPC -> A259MB.SPC
[sigmove 14:18:46 DEBUG] transformed A259Mc.SPC -> A259MC.SPC
[sigmove 14:18:46 DEBUG] transformed A259Md.SPC -> A259MD.SPC
[sigmove 14:18:46 DEBUG] transformed A259Me.SPC -> A259ME.SPC
[sigmove 14:18:46 DEBUG] transformed A259Mf.SPC -> A259MF.SPC
[Status 14:18:46 INFO] data for A259 transferred to science data processing
[Tidy 14:18:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:18:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:18:46 INFO] resetting WatchDogTimer
[Status 14:18:47 INFO] Starting Set [AERI set: name S259, 6 scans, 0 angle, D16300 command]
[Ingest 14:18:47 INFO] Sending XML status message
[Status 14:18:47 INFO] Mirror angle: 0
[Mirror 14:18:47 INFO] rotating to position S
[Status 14:18:48 INFO] .SET file for ACQ96 ready
[Ingest 14:18:49 INFO] Starting acquisition
[Status 14:18:49 INFO] reading housekeeping
[Status 14:19:07 INFO] acquire complete
[Status 14:19:08 INFO] writing housekeeping
[Sequencer 14:19:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:19:08 INFO] incremented S scene to 259 completed views
[Sequencer 14:19:08 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:19:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:19:08 INFO] incremented to [AERI set: name T259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:19:08 INFO] S259.SIG(18)
[sigmove 14:19:08 DEBUG] transformed S259Ma.SPC -> S259MA.SPC
[sigmove 14:19:08 DEBUG] transformed S259Mb.SPC -> S259MB.SPC
[sigmove 14:19:08 DEBUG] transformed S259Mc.SPC -> S259MC.SPC
[sigmove 14:19:08 DEBUG] transformed S259Md.SPC -> S259MD.SPC
[sigmove 14:19:08 DEBUG] transformed S259Me.SPC -> S259ME.SPC
[sigmove 14:19:08 DEBUG] transformed S259Mf.SPC -> S259MF.SPC
[Status 14:19:08 INFO] data for S259 transferred to science data processing
[Tidy 14:19:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:19:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:19:08 INFO] resetting WatchDogTimer
[Status 14:19:08 INFO] Starting Set [AERI set: name T259, 6 scans, 0 angle, D16300 command]
[Ingest 14:19:08 INFO] Sending XML status message
[Status 14:19:08 INFO] Mirror angle: 0
[Mirror 14:19:08 INFO] rotating to position T
[Status 14:19:09 INFO] .SET file for ACQ96 ready
[Ingest 14:19:09 INFO] Starting acquisition
[Status 14:19:09 INFO] reading housekeeping
[Status 14:19:27 INFO] acquire complete
[Status 14:19:28 INFO] writing housekeeping
[Sequencer 14:19:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:19:28 INFO] incremented T scene to 259 completed views
[Sequencer 14:19:28 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:19:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:19:28 INFO] incremented to [AERI set: name U259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:19:28 INFO] T259.SIG(18)
[sigmove 14:19:28 DEBUG] transformed T259Ma.SPC -> T259MA.SPC
[sigmove 14:19:28 DEBUG] transformed T259Mb.SPC -> T259MB.SPC
[sigmove 14:19:28 DEBUG] transformed T259Mc.SPC -> T259MC.SPC
[sigmove 14:19:28 DEBUG] transformed T259Md.SPC -> T259MD.SPC
[sigmove 14:19:28 DEBUG] transformed T259Me.SPC -> T259ME.SPC
[sigmove 14:19:28 DEBUG] transformed T259Mf.SPC -> T259MF.SPC
[Status 14:19:28 INFO] data for T259 transferred to science data processing
[Tidy 14:19:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:19:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:19:28 INFO] resetting WatchDogTimer
[Status 14:19:28 INFO] Starting Set [AERI set: name U259, 6 scans, 0 angle, D16300 command]
[Ingest 14:19:28 INFO] Sending XML status message
[Status 14:19:28 INFO] Mirror angle: 0
[Mirror 14:19:29 INFO] rotating to position U
[Status 14:19:29 INFO] .SET file for ACQ96 ready
[Ingest 14:19:29 INFO] Starting acquisition
[Status 14:19:30 INFO] reading housekeeping
[Status 14:19:47 INFO] acquire complete
[Status 14:19:48 INFO] writing housekeeping
[Sequencer 14:19:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:19:48 INFO] incremented U scene to 259 completed views
[Sequencer 14:19:48 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:19:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:19:48 INFO] incremented to [AERI set: name V259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:19:48 INFO] U259.SIG(18)
[sigmove 14:19:48 DEBUG] transformed U259Ma.SPC -> U259MA.SPC
[sigmove 14:19:48 DEBUG] transformed U259Mb.SPC -> U259MB.SPC
[sigmove 14:19:48 DEBUG] transformed U259Mc.SPC -> U259MC.SPC
[sigmove 14:19:48 DEBUG] transformed U259Md.SPC -> U259MD.SPC
[sigmove 14:19:48 DEBUG] transformed U259Me.SPC -> U259ME.SPC
[sigmove 14:19:48 DEBUG] transformed U259Mf.SPC -> U259MF.SPC
[Status 14:19:48 INFO] data for U259 transferred to science data processing
[Tidy 14:19:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:19:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:19:48 INFO] resetting WatchDogTimer
[Status 14:19:48 INFO] Starting Set [AERI set: name V259, 6 scans, 0 angle, D16300 command]
[Ingest 14:19:48 INFO] Sending XML status message
[Status 14:19:48 INFO] Mirror angle: 0
[Mirror 14:19:49 INFO] rotating to position V
[Status 14:19:49 INFO] .SET file for ACQ96 ready
[Ingest 14:19:49 INFO] Starting acquisition
[Status 14:19:50 INFO] reading housekeeping
[Status 14:20:07 INFO] acquire complete
[Status 14:20:08 INFO] writing housekeeping
[Sequencer 14:20:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:20:08 INFO] incremented V scene to 259 completed views
[Sequencer 14:20:08 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:20:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:20:08 INFO] incremented to [AERI set: name W259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:20:08 INFO] V259.SIG(18)
[sigmove 14:20:08 DEBUG] transformed V259Ma.SPC -> V259MA.SPC
[sigmove 14:20:08 DEBUG] transformed V259Mb.SPC -> V259MB.SPC
[sigmove 14:20:08 DEBUG] transformed V259Mc.SPC -> V259MC.SPC
[sigmove 14:20:08 DEBUG] transformed V259Md.SPC -> V259MD.SPC
[sigmove 14:20:08 DEBUG] transformed V259Me.SPC -> V259ME.SPC
[sigmove 14:20:08 DEBUG] transformed V259Mf.SPC -> V259MF.SPC
[Status 14:20:08 INFO] data for V259 transferred to science data processing
[Tidy 14:20:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:20:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:20:08 INFO] resetting WatchDogTimer
[Status 14:20:09 INFO] Starting Set [AERI set: name W259, 6 scans, 0 angle, D16300 command]
[Ingest 14:20:09 INFO] Sending XML status message
[Status 14:20:09 INFO] Mirror angle: 0
[Mirror 14:20:09 INFO] rotating to position W
[Status 14:20:09 INFO] .SET file for ACQ96 ready
[Ingest 14:20:10 INFO] Starting acquisition
[Status 14:20:10 INFO] reading housekeeping
[Status 14:20:27 INFO] acquire complete
[Status 14:20:28 INFO] writing housekeeping
[Sequencer 14:20:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:20:28 INFO] incremented W scene to 259 completed views
[Sequencer 14:20:28 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:20:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:20:28 INFO] incremented to [AERI set: name X259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:20:28 INFO] W259.SIG(18)
[sigmove 14:20:28 DEBUG] transformed W259Ma.SPC -> W259MA.SPC
[sigmove 14:20:28 DEBUG] transformed W259Mb.SPC -> W259MB.SPC
[sigmove 14:20:28 DEBUG] transformed W259Mc.SPC -> W259MC.SPC
[sigmove 14:20:28 DEBUG] transformed W259Md.SPC -> W259MD.SPC
[sigmove 14:20:28 DEBUG] transformed W259Me.SPC -> W259ME.SPC
[sigmove 14:20:28 DEBUG] transformed W259Mf.SPC -> W259MF.SPC
[Status 14:20:28 INFO] data for W259 transferred to science data processing
[Tidy 14:20:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:20:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:20:28 INFO] resetting WatchDogTimer
[Status 14:20:29 INFO] Starting Set [AERI set: name X259, 6 scans, 0 angle, D16300 command]
[Ingest 14:20:29 INFO] Sending XML status message
[Status 14:20:29 INFO] Mirror angle: 0
[Mirror 14:20:29 INFO] rotating to position X
[Status 14:20:29 INFO] .SET file for ACQ96 ready
[Ingest 14:20:30 INFO] Starting acquisition
[Status 14:20:30 INFO] reading housekeeping
[Status 14:20:48 INFO] acquire complete
[Status 14:20:49 INFO] writing housekeeping
[Sequencer 14:20:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:20:49 INFO] incremented X scene to 259 completed views
[Sequencer 14:20:49 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:20:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:20:49 INFO] incremented to [AERI set: name Y259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:20:49 INFO] X259.SIG(18)
[sigmove 14:20:49 DEBUG] transformed X259Ma.SPC -> X259MA.SPC
[sigmove 14:20:49 DEBUG] transformed X259Mb.SPC -> X259MB.SPC
[sigmove 14:20:49 DEBUG] transformed X259Mc.SPC -> X259MC.SPC
[sigmove 14:20:49 DEBUG] transformed X259Md.SPC -> X259MD.SPC
[sigmove 14:20:49 DEBUG] transformed X259Me.SPC -> X259ME.SPC
[sigmove 14:20:49 DEBUG] transformed X259Mf.SPC -> X259MF.SPC
[Status 14:20:49 INFO] data for X259 transferred to science data processing
[Tidy 14:20:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:20:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:20:49 INFO] resetting WatchDogTimer
[Status 14:20:49 INFO] Starting Set [AERI set: name Y259, 6 scans, 0 angle, D16300 command]
[Ingest 14:20:49 INFO] Sending XML status message
[Status 14:20:49 INFO] Mirror angle: 0
[Mirror 14:20:49 INFO] rotating to position Y
[Status 14:20:50 INFO] .SET file for ACQ96 ready
[Ingest 14:20:50 INFO] Starting acquisition
[Status 14:20:50 INFO] reading housekeeping
[Status 14:21:08 INFO] acquire complete
[Status 14:21:09 INFO] writing housekeeping
[Sequencer 14:21:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:21:09 INFO] incremented Y scene to 259 completed views
[Sequencer 14:21:09 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:21:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:21:09 INFO] incremented to [AERI set: name Z259, 6 scans, 0 angle, D16300 command] set
[sigmove 14:21:09 INFO] Y259.SIG(18)
[sigmove 14:21:09 DEBUG] transformed Y259Ma.SPC -> Y259MA.SPC
[sigmove 14:21:09 DEBUG] transformed Y259Mb.SPC -> Y259MB.SPC
[sigmove 14:21:09 DEBUG] transformed Y259Mc.SPC -> Y259MC.SPC
[sigmove 14:21:09 DEBUG] transformed Y259Md.SPC -> Y259MD.SPC
[sigmove 14:21:09 DEBUG] transformed Y259Me.SPC -> Y259ME.SPC
[sigmove 14:21:09 DEBUG] transformed Y259Mf.SPC -> Y259MF.SPC
[Status 14:21:09 INFO] data for Y259 transferred to science data processing
[Tidy 14:21:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:21:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:21:09 INFO] resetting WatchDogTimer
[Status 14:21:09 INFO] Starting Set [AERI set: name Z259, 6 scans, 0 angle, D16300 command]
[Ingest 14:21:09 INFO] Sending XML status message
[Status 14:21:09 INFO] Mirror angle: 0
[Mirror 14:21:09 INFO] rotating to position Z
[Status 14:21:10 INFO] .SET file for ACQ96 ready
[Ingest 14:21:10 INFO] Starting acquisition
[Status 14:21:11 INFO] reading housekeeping
[Status 14:21:28 INFO] acquire complete
[Status 14:21:29 INFO] writing housekeeping
[Sequencer 14:21:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:21:29 INFO] incremented Z scene to 259 completed views
[Sequencer 14:21:29 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:21:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:21:29 INFO] incremented to [AERI set: name A260, 6 scans, 120 angle, D28300 command] set
[sigmove 14:21:29 INFO] Z259.SIG(18)
[sigmove 14:21:29 DEBUG] transformed Z259Ma.SPC -> Z259MA.SPC
[sigmove 14:21:29 DEBUG] transformed Z259Mb.SPC -> Z259MB.SPC
[sigmove 14:21:29 DEBUG] transformed Z259Mc.SPC -> Z259MC.SPC
[sigmove 14:21:29 DEBUG] transformed Z259Md.SPC -> Z259MD.SPC
[sigmove 14:21:29 DEBUG] transformed Z259Me.SPC -> Z259ME.SPC
[sigmove 14:21:29 DEBUG] transformed Z259Mf.SPC -> Z259MF.SPC
[Status 14:21:29 INFO] data for Z259 transferred to science data processing
[Tidy 14:21:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:21:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:21:29 INFO] resetting WatchDogTimer
[Status 14:21:29 INFO] Starting Set [AERI set: name A260, 6 scans, 120 angle, D28300 command]
[Ingest 14:21:29 INFO] Sending XML status message
[Status 14:21:29 INFO] Mirror angle: 120
[Mirror 14:21:30 INFO] rotating to position A
[Status 14:21:31 INFO] .SET file for ACQ96 ready
[Ingest 14:21:31 INFO] Starting acquisition
[Status 14:21:32 INFO] reading housekeeping
[Status 14:21:49 INFO] acquire complete
[Status 14:21:50 INFO] writing housekeeping
[Sequencer 14:21:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:21:50 INFO] incremented A scene to 260 completed views
[Sequencer 14:21:50 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:21:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:21:50 INFO] incremented to [AERI set: name H260, 6 scans, 60 angle, D22500 command] set
[sigmove 14:21:50 INFO] A260.SIG(18)
[sigmove 14:21:50 DEBUG] transformed A260Ma.SPC -> A260MA.SPC
[sigmove 14:21:50 DEBUG] transformed A260Mb.SPC -> A260MB.SPC
[sigmove 14:21:50 DEBUG] transformed A260Mc.SPC -> A260MC.SPC
[sigmove 14:21:50 DEBUG] transformed A260Md.SPC -> A260MD.SPC
[sigmove 14:21:50 DEBUG] transformed A260Me.SPC -> A260ME.SPC
[sigmove 14:21:50 DEBUG] transformed A260Mf.SPC -> A260MF.SPC
[Status 14:21:50 INFO] data for A260 transferred to science data processing
[Tidy 14:21:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:21:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:21:50 INFO] resetting WatchDogTimer
[Status 14:21:51 INFO] Starting Set [AERI set: name H260, 6 scans, 60 angle, D22500 command]
[Ingest 14:21:51 INFO] Sending XML status message
[Status 14:21:51 INFO] Mirror angle: 60
[Mirror 14:21:51 INFO] rotating to position H
[Status 14:21:52 INFO] .SET file for ACQ96 ready
[Ingest 14:21:52 INFO] Starting acquisition
[Status 14:21:53 INFO] reading housekeeping
[Status 14:22:11 INFO] acquire complete
[Status 14:22:12 INFO] writing housekeeping
[Sequencer 14:22:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:22:12 INFO] incremented H scene to 260 completed views
[Sequencer 14:22:12 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:22:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:22:12 INFO] incremented to [AERI set: name S260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:22:12 INFO] H260.SIG(18)
[sigmove 14:22:12 DEBUG] transformed H260Ma.SPC -> H260MA.SPC
[sigmove 14:22:12 DEBUG] transformed H260Mb.SPC -> H260MB.SPC
[sigmove 14:22:12 DEBUG] transformed H260Mc.SPC -> H260MC.SPC
[sigmove 14:22:12 DEBUG] transformed H260Md.SPC -> H260MD.SPC
[sigmove 14:22:12 DEBUG] transformed H260Me.SPC -> H260ME.SPC
[sigmove 14:22:12 DEBUG] transformed H260Mf.SPC -> H260MF.SPC
[Status 14:22:12 INFO] data for H260 transferred to science data processing
[Tidy 14:22:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:22:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:22:12 INFO] resetting WatchDogTimer
[Status 14:22:12 INFO] Starting Set [AERI set: name S260, 6 scans, 0 angle, D16300 command]
[Ingest 14:22:12 INFO] Sending XML status message
[Status 14:22:12 INFO] Mirror angle: 0
[Mirror 14:22:12 INFO] rotating to position S
[Status 14:22:13 INFO] .SET file for ACQ96 ready
[Ingest 14:22:14 INFO] Starting acquisition
[Status 14:22:14 INFO] reading housekeeping
[Status 14:22:32 INFO] acquire complete
[Status 14:22:33 INFO] writing housekeeping
[Sequencer 14:22:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:22:33 INFO] incremented S scene to 260 completed views
[Sequencer 14:22:33 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:22:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:22:33 INFO] incremented to [AERI set: name T260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:22:33 INFO] S260.SIG(18)
[sigmove 14:22:33 DEBUG] transformed S260Ma.SPC -> S260MA.SPC
[sigmove 14:22:33 DEBUG] transformed S260Mb.SPC -> S260MB.SPC
[sigmove 14:22:33 DEBUG] transformed S260Mc.SPC -> S260MC.SPC
[sigmove 14:22:33 DEBUG] transformed S260Md.SPC -> S260MD.SPC
[sigmove 14:22:33 DEBUG] transformed S260Me.SPC -> S260ME.SPC
[sigmove 14:22:33 DEBUG] transformed S260Mf.SPC -> S260MF.SPC
[Status 14:22:33 INFO] data for S260 transferred to science data processing
[Tidy 14:22:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:22:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:22:33 INFO] resetting WatchDogTimer
[Status 14:22:33 INFO] Starting Set [AERI set: name T260, 6 scans, 0 angle, D16300 command]
[Ingest 14:22:33 INFO] Sending XML status message
[Status 14:22:33 INFO] Mirror angle: 0
[Mirror 14:22:34 INFO] rotating to position T
[Status 14:22:34 INFO] .SET file for ACQ96 ready
[Ingest 14:22:34 INFO] Starting acquisition
[Status 14:22:35 INFO] reading housekeeping
[Status 14:22:52 INFO] acquire complete
[Status 14:22:53 INFO] writing housekeeping
[Sequencer 14:22:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:22:53 INFO] incremented T scene to 260 completed views
[Sequencer 14:22:53 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:22:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:22:53 INFO] incremented to [AERI set: name U260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:22:53 INFO] T260.SIG(18)
[sigmove 14:22:53 DEBUG] transformed T260Ma.SPC -> T260MA.SPC
[sigmove 14:22:53 DEBUG] transformed T260Mb.SPC -> T260MB.SPC
[sigmove 14:22:53 DEBUG] transformed T260Mc.SPC -> T260MC.SPC
[sigmove 14:22:53 DEBUG] transformed T260Md.SPC -> T260MD.SPC
[sigmove 14:22:53 DEBUG] transformed T260Me.SPC -> T260ME.SPC
[sigmove 14:22:53 DEBUG] transformed T260Mf.SPC -> T260MF.SPC
[Status 14:22:53 INFO] data for T260 transferred to science data processing
[Tidy 14:22:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:22:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:22:53 INFO] resetting WatchDogTimer
[Status 14:22:54 INFO] Starting Set [AERI set: name U260, 6 scans, 0 angle, D16300 command]
[Ingest 14:22:54 INFO] Sending XML status message
[Status 14:22:54 INFO] Mirror angle: 0
[Mirror 14:22:54 INFO] rotating to position U
[Status 14:22:55 INFO] .SET file for ACQ96 ready
[Ingest 14:22:55 INFO] Starting acquisition
[Status 14:22:55 INFO] reading housekeeping
[Status 14:23:12 INFO] acquire complete
[Status 14:23:13 INFO] writing housekeeping
[Sequencer 14:23:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:23:13 INFO] incremented U scene to 260 completed views
[Sequencer 14:23:13 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:23:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:23:13 INFO] incremented to [AERI set: name V260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:23:13 INFO] U260.SIG(18)
[sigmove 14:23:13 DEBUG] transformed U260Ma.SPC -> U260MA.SPC
[sigmove 14:23:13 DEBUG] transformed U260Mb.SPC -> U260MB.SPC
[sigmove 14:23:13 DEBUG] transformed U260Mc.SPC -> U260MC.SPC
[sigmove 14:23:13 DEBUG] transformed U260Md.SPC -> U260MD.SPC
[sigmove 14:23:13 DEBUG] transformed U260Me.SPC -> U260ME.SPC
[sigmove 14:23:13 DEBUG] transformed U260Mf.SPC -> U260MF.SPC
[Status 14:23:13 INFO] data for U260 transferred to science data processing
[Tidy 14:23:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:23:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:23:13 INFO] resetting WatchDogTimer
[Status 14:23:14 INFO] Starting Set [AERI set: name V260, 6 scans, 0 angle, D16300 command]
[Ingest 14:23:14 INFO] Sending XML status message
[Status 14:23:14 INFO] Mirror angle: 0
[Mirror 14:23:14 INFO] rotating to position V
[Status 14:23:14 INFO] .SET file for ACQ96 ready
[Ingest 14:23:15 INFO] Starting acquisition
[Status 14:23:15 INFO] reading housekeeping
[Status 14:23:33 INFO] acquire complete
[Status 14:23:33 INFO] writing housekeeping
[Sequencer 14:23:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:23:33 INFO] incremented V scene to 260 completed views
[Sequencer 14:23:33 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:23:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:23:33 INFO] incremented to [AERI set: name W260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:23:33 INFO] V260.SIG(18)
[sigmove 14:23:33 DEBUG] transformed V260Ma.SPC -> V260MA.SPC
[sigmove 14:23:33 DEBUG] transformed V260Mb.SPC -> V260MB.SPC
[sigmove 14:23:33 DEBUG] transformed V260Mc.SPC -> V260MC.SPC
[sigmove 14:23:33 DEBUG] transformed V260Md.SPC -> V260MD.SPC
[sigmove 14:23:33 DEBUG] transformed V260Me.SPC -> V260ME.SPC
[sigmove 14:23:33 DEBUG] transformed V260Mf.SPC -> V260MF.SPC
[Status 14:23:33 INFO] data for V260 transferred to science data processing
[Tidy 14:23:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:23:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:23:33 INFO] resetting WatchDogTimer
[Status 14:23:34 INFO] Starting Set [AERI set: name W260, 6 scans, 0 angle, D16300 command]
[Ingest 14:23:34 INFO] Sending XML status message
[Status 14:23:34 INFO] Mirror angle: 0
[Mirror 14:23:34 INFO] rotating to position W
[Status 14:23:35 INFO] .SET file for ACQ96 ready
[Ingest 14:23:35 INFO] Starting acquisition
[Status 14:23:35 INFO] reading housekeeping
[Status 14:23:53 INFO] acquire complete
[Status 14:23:54 INFO] writing housekeeping
[Sequencer 14:23:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:23:54 INFO] incremented W scene to 260 completed views
[Sequencer 14:23:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:23:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:23:54 INFO] incremented to [AERI set: name X260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:23:54 INFO] W260.SIG(18)
[sigmove 14:23:54 DEBUG] transformed W260Ma.SPC -> W260MA.SPC
[sigmove 14:23:54 DEBUG] transformed W260Mb.SPC -> W260MB.SPC
[sigmove 14:23:54 DEBUG] transformed W260Mc.SPC -> W260MC.SPC
[sigmove 14:23:54 DEBUG] transformed W260Md.SPC -> W260MD.SPC
[sigmove 14:23:54 DEBUG] transformed W260Me.SPC -> W260ME.SPC
[sigmove 14:23:54 DEBUG] transformed W260Mf.SPC -> W260MF.SPC
[Status 14:23:54 INFO] data for W260 transferred to science data processing
[Tidy 14:23:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:23:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:23:54 INFO] resetting WatchDogTimer
[Status 14:23:54 INFO] Starting Set [AERI set: name X260, 6 scans, 0 angle, D16300 command]
[Ingest 14:23:54 INFO] Sending XML status message
[Status 14:23:54 INFO] Mirror angle: 0
[Mirror 14:23:54 INFO] rotating to position X
[Status 14:23:55 INFO] .SET file for ACQ96 ready
[Ingest 14:23:55 INFO] Starting acquisition
[Status 14:23:56 INFO] reading housekeeping
[Status 14:24:13 INFO] acquire complete
[Status 14:24:14 INFO] writing housekeeping
[Sequencer 14:24:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:24:14 INFO] incremented X scene to 260 completed views
[Sequencer 14:24:14 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:24:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:24:14 INFO] incremented to [AERI set: name Y260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:24:14 INFO] X260.SIG(18)
[sigmove 14:24:14 DEBUG] transformed X260Ma.SPC -> X260MA.SPC
[sigmove 14:24:14 DEBUG] transformed X260Mb.SPC -> X260MB.SPC
[sigmove 14:24:14 DEBUG] transformed X260Mc.SPC -> X260MC.SPC
[sigmove 14:24:14 DEBUG] transformed X260Md.SPC -> X260MD.SPC
[sigmove 14:24:14 DEBUG] transformed X260Me.SPC -> X260ME.SPC
[sigmove 14:24:14 DEBUG] transformed X260Mf.SPC -> X260MF.SPC
[Status 14:24:14 INFO] data for X260 transferred to science data processing
[Tidy 14:24:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:24:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:24:14 INFO] resetting WatchDogTimer
[Status 14:24:14 INFO] Starting Set [AERI set: name Y260, 6 scans, 0 angle, D16300 command]
[Ingest 14:24:14 INFO] Sending XML status message
[Status 14:24:14 INFO] Mirror angle: 0
[Mirror 14:24:15 INFO] rotating to position Y
[Status 14:24:15 INFO] .SET file for ACQ96 ready
[Ingest 14:24:15 INFO] Starting acquisition
[Status 14:24:16 INFO] reading housekeeping
[Status 14:24:33 INFO] acquire complete
[Status 14:24:34 INFO] writing housekeeping
[Sequencer 14:24:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:24:34 INFO] incremented Y scene to 260 completed views
[Sequencer 14:24:34 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:24:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:24:34 INFO] incremented to [AERI set: name Z260, 6 scans, 0 angle, D16300 command] set
[sigmove 14:24:34 INFO] Y260.SIG(18)
[sigmove 14:24:34 DEBUG] transformed Y260Ma.SPC -> Y260MA.SPC
[sigmove 14:24:34 DEBUG] transformed Y260Mb.SPC -> Y260MB.SPC
[sigmove 14:24:34 DEBUG] transformed Y260Mc.SPC -> Y260MC.SPC
[sigmove 14:24:34 DEBUG] transformed Y260Md.SPC -> Y260MD.SPC
[sigmove 14:24:34 DEBUG] transformed Y260Me.SPC -> Y260ME.SPC
[sigmove 14:24:34 DEBUG] transformed Y260Mf.SPC -> Y260MF.SPC
[Status 14:24:34 INFO] data for Y260 transferred to science data processing
[Tidy 14:24:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:24:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:24:34 INFO] resetting WatchDogTimer
[Status 14:24:34 INFO] Starting Set [AERI set: name Z260, 6 scans, 0 angle, D16300 command]
[Ingest 14:24:34 INFO] Sending XML status message
[Status 14:24:34 INFO] Mirror angle: 0
[Mirror 14:24:35 INFO] rotating to position Z
[Status 14:24:35 INFO] .SET file for ACQ96 ready
[Ingest 14:24:35 INFO] Starting acquisition
[Status 14:24:36 INFO] reading housekeeping
[Status 14:24:53 INFO] acquire complete
[Status 14:24:54 INFO] writing housekeeping
[Sequencer 14:24:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:24:54 INFO] incremented Z scene to 260 completed views
[Sequencer 14:24:54 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:24:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:24:54 INFO] incremented to [AERI set: name H261, 6 scans, 60 angle, D22500 command] set
[sigmove 14:24:54 INFO] Z260.SIG(18)
[sigmove 14:24:54 DEBUG] transformed Z260Ma.SPC -> Z260MA.SPC
[sigmove 14:24:54 DEBUG] transformed Z260Mb.SPC -> Z260MB.SPC
[sigmove 14:24:54 DEBUG] transformed Z260Mc.SPC -> Z260MC.SPC
[sigmove 14:24:54 DEBUG] transformed Z260Md.SPC -> Z260MD.SPC
[sigmove 14:24:54 DEBUG] transformed Z260Me.SPC -> Z260ME.SPC
[sigmove 14:24:54 DEBUG] transformed Z260Mf.SPC -> Z260MF.SPC
[Status 14:24:54 INFO] data for Z260 transferred to science data processing
[Tidy 14:24:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:24:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:24:54 INFO] resetting WatchDogTimer
[Status 14:24:55 INFO] Starting Set [AERI set: name H261, 6 scans, 60 angle, D22500 command]
[Ingest 14:24:55 INFO] Sending XML status message
[Status 14:24:55 INFO] Mirror angle: 60
[Mirror 14:24:55 INFO] rotating to position H
[Status 14:24:56 INFO] .SET file for ACQ96 ready
[Ingest 14:24:56 INFO] Starting acquisition
[Status 14:24:57 INFO] reading housekeeping
[Status 14:25:15 INFO] acquire complete
[Status 14:25:16 INFO] writing housekeeping
[Sequencer 14:25:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:25:16 INFO] incremented H scene to 261 completed views
[Sequencer 14:25:16 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:25:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:25:16 INFO] incremented to [AERI set: name A261, 6 scans, 120 angle, D28300 command] set
[sigmove 14:25:16 INFO] H261.SIG(18)
[sigmove 14:25:16 DEBUG] transformed H261Ma.SPC -> H261MA.SPC
[sigmove 14:25:16 DEBUG] transformed H261Mb.SPC -> H261MB.SPC
[sigmove 14:25:16 DEBUG] transformed H261Mc.SPC -> H261MC.SPC
[sigmove 14:25:16 DEBUG] transformed H261Md.SPC -> H261MD.SPC
[sigmove 14:25:16 DEBUG] transformed H261Me.SPC -> H261ME.SPC
[sigmove 14:25:16 DEBUG] transformed H261Mf.SPC -> H261MF.SPC
[Status 14:25:16 INFO] data for H261 transferred to science data processing
[Tidy 14:25:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:25:16 INFO] A259.FIN(19),H259.FIN(19),S259.FIN(19),T259.FIN(19),U259.FIN(19),V259.FIN(19),W259.FIN(19),X259.FIN(19),Y259.FIN(19),Z259.FIN(19),A260.FIN(19),H260.FIN(19),S260.FIN(19),T260.FIN(19),U260.FIN(19),V260.FIN(19),W260.FIN(19),X260.FIN(19),Y260.FIN(19),Z260.FIN(19)
[sigmove 14:25:16 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:25:16 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:25:20 DEBUG] done zipping
[WatchDog 14:25:20 INFO] resetting WatchDogTimer
[Status 14:25:21 INFO] Starting Set [AERI set: name A261, 6 scans, 120 angle, D28300 command]
[Ingest 14:25:21 INFO] Sending XML status message
[Status 14:25:21 INFO] Mirror angle: 120
[Mirror 14:25:21 INFO] rotating to position A
[Status 14:25:22 INFO] .SET file for ACQ96 ready
[Ingest 14:25:22 INFO] Starting acquisition
[Status 14:25:23 INFO] reading housekeeping
[Status 14:25:40 INFO] acquire complete
[Status 14:25:41 INFO] writing housekeeping
[Sequencer 14:25:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:25:41 INFO] incremented A scene to 261 completed views
[Sequencer 14:25:41 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:25:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:25:41 INFO] incremented to [AERI set: name S261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:25:41 INFO] A261.SIG(18)
[sigmove 14:25:41 DEBUG] transformed A261Ma.SPC -> A261MA.SPC
[sigmove 14:25:41 DEBUG] transformed A261Mb.SPC -> A261MB.SPC
[sigmove 14:25:41 DEBUG] transformed A261Mc.SPC -> A261MC.SPC
[sigmove 14:25:41 DEBUG] transformed A261Md.SPC -> A261MD.SPC
[sigmove 14:25:41 DEBUG] transformed A261Me.SPC -> A261ME.SPC
[sigmove 14:25:41 DEBUG] transformed A261Mf.SPC -> A261MF.SPC
[Status 14:25:41 INFO] data for A261 transferred to science data processing
[Tidy 14:25:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:25:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:25:41 INFO] resetting WatchDogTimer
[Status 14:25:42 INFO] Starting Set [AERI set: name S261, 6 scans, 0 angle, D16300 command]
[Ingest 14:25:42 INFO] Sending XML status message
[Status 14:25:42 INFO] Mirror angle: 0
[Mirror 14:25:42 INFO] rotating to position S
[Status 14:25:44 INFO] .SET file for ACQ96 ready
[Ingest 14:25:44 INFO] Starting acquisition
[Status 14:25:44 INFO] reading housekeeping
[Status 14:26:02 INFO] acquire complete
[Status 14:26:03 INFO] writing housekeeping
[Sequencer 14:26:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:26:03 INFO] incremented S scene to 261 completed views
[Sequencer 14:26:03 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:26:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:26:03 INFO] incremented to [AERI set: name T261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:26:03 INFO] S261.SIG(18)
[sigmove 14:26:03 DEBUG] transformed S261Ma.SPC -> S261MA.SPC
[sigmove 14:26:03 DEBUG] transformed S261Mb.SPC -> S261MB.SPC
[sigmove 14:26:03 DEBUG] transformed S261Mc.SPC -> S261MC.SPC
[sigmove 14:26:03 DEBUG] transformed S261Md.SPC -> S261MD.SPC
[sigmove 14:26:03 DEBUG] transformed S261Me.SPC -> S261ME.SPC
[sigmove 14:26:03 DEBUG] transformed S261Mf.SPC -> S261MF.SPC
[Status 14:26:03 INFO] data for S261 transferred to science data processing
[Tidy 14:26:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:26:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:26:03 INFO] resetting WatchDogTimer
[Status 14:26:03 INFO] Starting Set [AERI set: name T261, 6 scans, 0 angle, D16300 command]
[Ingest 14:26:03 INFO] Sending XML status message
[Status 14:26:03 INFO] Mirror angle: 0
[Mirror 14:26:03 INFO] rotating to position T
[Status 14:26:04 INFO] .SET file for ACQ96 ready
[Ingest 14:26:04 INFO] Starting acquisition
[Status 14:26:04 INFO] reading housekeeping
[Status 14:26:22 INFO] acquire complete
[Status 14:26:23 INFO] writing housekeeping
[Sequencer 14:26:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:26:23 INFO] incremented T scene to 261 completed views
[Sequencer 14:26:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:26:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:26:23 INFO] incremented to [AERI set: name U261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:26:23 INFO] T261.SIG(18)
[sigmove 14:26:23 DEBUG] transformed T261Ma.SPC -> T261MA.SPC
[sigmove 14:26:23 DEBUG] transformed T261Mb.SPC -> T261MB.SPC
[sigmove 14:26:23 DEBUG] transformed T261Mc.SPC -> T261MC.SPC
[sigmove 14:26:23 DEBUG] transformed T261Md.SPC -> T261MD.SPC
[sigmove 14:26:23 DEBUG] transformed T261Me.SPC -> T261ME.SPC
[sigmove 14:26:23 DEBUG] transformed T261Mf.SPC -> T261MF.SPC
[Status 14:26:23 INFO] data for T261 transferred to science data processing
[Tidy 14:26:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:26:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:26:23 INFO] resetting WatchDogTimer
[Status 14:26:23 INFO] Starting Set [AERI set: name U261, 6 scans, 0 angle, D16300 command]
[Ingest 14:26:23 INFO] Sending XML status message
[Status 14:26:23 INFO] Mirror angle: 0
[Mirror 14:26:24 INFO] rotating to position U
[Status 14:26:24 INFO] .SET file for ACQ96 ready
[Ingest 14:26:24 INFO] Starting acquisition
[Status 14:26:25 INFO] reading housekeeping
[Status 14:26:42 INFO] acquire complete
[Status 14:26:43 INFO] writing housekeeping
[Sequencer 14:26:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:26:43 INFO] incremented U scene to 261 completed views
[Sequencer 14:26:43 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:26:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:26:43 INFO] incremented to [AERI set: name V261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:26:43 INFO] U261.SIG(18)
[sigmove 14:26:43 DEBUG] transformed U261Ma.SPC -> U261MA.SPC
[sigmove 14:26:43 DEBUG] transformed U261Mb.SPC -> U261MB.SPC
[sigmove 14:26:43 DEBUG] transformed U261Mc.SPC -> U261MC.SPC
[sigmove 14:26:43 DEBUG] transformed U261Md.SPC -> U261MD.SPC
[sigmove 14:26:43 DEBUG] transformed U261Me.SPC -> U261ME.SPC
[sigmove 14:26:43 DEBUG] transformed U261Mf.SPC -> U261MF.SPC
[Status 14:26:43 INFO] data for U261 transferred to science data processing
[Tidy 14:26:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:26:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:26:43 INFO] resetting WatchDogTimer
[Status 14:26:43 INFO] Starting Set [AERI set: name V261, 6 scans, 0 angle, D16300 command]
[Ingest 14:26:43 INFO] Sending XML status message
[Status 14:26:43 INFO] Mirror angle: 0
[Mirror 14:26:44 INFO] rotating to position V
[Status 14:26:44 INFO] .SET file for ACQ96 ready
[Ingest 14:26:44 INFO] Starting acquisition
[Status 14:26:45 INFO] reading housekeeping
[Status 14:27:02 INFO] acquire complete
[Status 14:27:03 INFO] writing housekeeping
[Sequencer 14:27:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:27:03 INFO] incremented V scene to 261 completed views
[Sequencer 14:27:03 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:27:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:27:03 INFO] incremented to [AERI set: name W261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:27:03 INFO] V261.SIG(18)
[sigmove 14:27:03 DEBUG] transformed V261Ma.SPC -> V261MA.SPC
[sigmove 14:27:03 DEBUG] transformed V261Mb.SPC -> V261MB.SPC
[sigmove 14:27:03 DEBUG] transformed V261Mc.SPC -> V261MC.SPC
[sigmove 14:27:03 DEBUG] transformed V261Md.SPC -> V261MD.SPC
[sigmove 14:27:03 DEBUG] transformed V261Me.SPC -> V261ME.SPC
[sigmove 14:27:03 DEBUG] transformed V261Mf.SPC -> V261MF.SPC
[Status 14:27:03 INFO] data for V261 transferred to science data processing
[Tidy 14:27:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:27:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:27:03 INFO] resetting WatchDogTimer
[Status 14:27:04 INFO] Starting Set [AERI set: name W261, 6 scans, 0 angle, D16300 command]
[Ingest 14:27:04 INFO] Sending XML status message
[Status 14:27:04 INFO] Mirror angle: 0
[Mirror 14:27:04 INFO] rotating to position W
[Status 14:27:04 INFO] .SET file for ACQ96 ready
[Ingest 14:27:05 INFO] Starting acquisition
[Status 14:27:05 INFO] reading housekeeping
[Status 14:27:23 INFO] acquire complete
[Status 14:27:23 INFO] writing housekeeping
[Sequencer 14:27:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:27:23 INFO] incremented W scene to 261 completed views
[Sequencer 14:27:23 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:27:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:27:23 INFO] incremented to [AERI set: name X261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:27:23 INFO] W261.SIG(18)
[sigmove 14:27:23 DEBUG] transformed W261Ma.SPC -> W261MA.SPC
[sigmove 14:27:23 DEBUG] transformed W261Mb.SPC -> W261MB.SPC
[sigmove 14:27:23 DEBUG] transformed W261Mc.SPC -> W261MC.SPC
[sigmove 14:27:23 DEBUG] transformed W261Md.SPC -> W261MD.SPC
[sigmove 14:27:23 DEBUG] transformed W261Me.SPC -> W261ME.SPC
[sigmove 14:27:23 DEBUG] transformed W261Mf.SPC -> W261MF.SPC
[Status 14:27:23 INFO] data for W261 transferred to science data processing
[Tidy 14:27:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:27:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:27:23 INFO] resetting WatchDogTimer
[Status 14:27:24 INFO] Starting Set [AERI set: name X261, 6 scans, 0 angle, D16300 command]
[Ingest 14:27:24 INFO] Sending XML status message
[Status 14:27:24 INFO] Mirror angle: 0
[Mirror 14:27:24 INFO] rotating to position X
[Status 14:27:25 INFO] .SET file for ACQ96 ready
[Ingest 14:27:25 INFO] Starting acquisition
[Status 14:27:25 INFO] reading housekeeping
[Status 14:27:43 INFO] acquire complete
[Status 14:27:44 INFO] writing housekeeping
[Sequencer 14:27:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:27:44 INFO] incremented X scene to 261 completed views
[Sequencer 14:27:44 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:27:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:27:44 INFO] incremented to [AERI set: name Y261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:27:44 INFO] X261.SIG(18)
[sigmove 14:27:44 DEBUG] transformed X261Ma.SPC -> X261MA.SPC
[sigmove 14:27:44 DEBUG] transformed X261Mb.SPC -> X261MB.SPC
[sigmove 14:27:44 DEBUG] transformed X261Mc.SPC -> X261MC.SPC
[sigmove 14:27:44 DEBUG] transformed X261Md.SPC -> X261MD.SPC
[sigmove 14:27:44 DEBUG] transformed X261Me.SPC -> X261ME.SPC
[sigmove 14:27:44 DEBUG] transformed X261Mf.SPC -> X261MF.SPC
[Status 14:27:44 INFO] data for X261 transferred to science data processing
[Tidy 14:27:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:27:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:27:44 INFO] resetting WatchDogTimer
[Status 14:27:44 INFO] Starting Set [AERI set: name Y261, 6 scans, 0 angle, D16300 command]
[Ingest 14:27:44 INFO] Sending XML status message
[Status 14:27:44 INFO] Mirror angle: 0
[Mirror 14:27:44 INFO] rotating to position Y
[Status 14:27:45 INFO] .SET file for ACQ96 ready
[Ingest 14:27:45 INFO] Starting acquisition
[Status 14:27:45 INFO] reading housekeeping
[Status 14:28:03 INFO] acquire complete
[Status 14:28:04 INFO] writing housekeeping
[Sequencer 14:28:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:28:04 INFO] incremented Y scene to 261 completed views
[Sequencer 14:28:04 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:28:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:28:04 INFO] incremented to [AERI set: name Z261, 6 scans, 0 angle, D16300 command] set
[sigmove 14:28:04 INFO] Y261.SIG(18)
[sigmove 14:28:04 DEBUG] transformed Y261Ma.SPC -> Y261MA.SPC
[sigmove 14:28:04 DEBUG] transformed Y261Mb.SPC -> Y261MB.SPC
[sigmove 14:28:04 DEBUG] transformed Y261Mc.SPC -> Y261MC.SPC
[sigmove 14:28:04 DEBUG] transformed Y261Md.SPC -> Y261MD.SPC
[sigmove 14:28:04 DEBUG] transformed Y261Me.SPC -> Y261ME.SPC
[sigmove 14:28:04 DEBUG] transformed Y261Mf.SPC -> Y261MF.SPC
[Status 14:28:04 INFO] data for Y261 transferred to science data processing
[Tidy 14:28:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:28:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:28:04 INFO] resetting WatchDogTimer
[Status 14:28:04 INFO] Starting Set [AERI set: name Z261, 6 scans, 0 angle, D16300 command]
[Ingest 14:28:04 INFO] Sending XML status message
[Status 14:28:04 INFO] Mirror angle: 0
[Mirror 14:28:05 INFO] rotating to position Z
[Status 14:28:05 INFO] .SET file for ACQ96 ready
[Ingest 14:28:05 INFO] Starting acquisition
[Status 14:28:06 INFO] reading housekeeping
[Status 14:28:23 INFO] acquire complete
[Status 14:28:24 INFO] writing housekeeping
[Sequencer 14:28:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:28:24 INFO] incremented Z scene to 261 completed views
[Sequencer 14:28:24 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:28:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:28:24 INFO] incremented to [AERI set: name A262, 6 scans, 120 angle, D28300 command] set
[sigmove 14:28:24 INFO] Z261.SIG(18)
[sigmove 14:28:24 DEBUG] transformed Z261Ma.SPC -> Z261MA.SPC
[sigmove 14:28:24 DEBUG] transformed Z261Mb.SPC -> Z261MB.SPC
[sigmove 14:28:24 DEBUG] transformed Z261Mc.SPC -> Z261MC.SPC
[sigmove 14:28:24 DEBUG] transformed Z261Md.SPC -> Z261MD.SPC
[sigmove 14:28:24 DEBUG] transformed Z261Me.SPC -> Z261ME.SPC
[sigmove 14:28:24 DEBUG] transformed Z261Mf.SPC -> Z261MF.SPC
[Status 14:28:24 INFO] data for Z261 transferred to science data processing
[Tidy 14:28:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:28:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:28:24 INFO] resetting WatchDogTimer
[Status 14:28:24 INFO] Starting Set [AERI set: name A262, 6 scans, 120 angle, D28300 command]
[Ingest 14:28:24 INFO] Sending XML status message
[Status 14:28:24 INFO] Mirror angle: 120
[Mirror 14:28:25 INFO] rotating to position A
[Status 14:28:26 INFO] .SET file for ACQ96 ready
[Ingest 14:28:27 INFO] Starting acquisition
[Status 14:28:27 INFO] reading housekeeping
[Status 14:28:44 INFO] acquire complete
[Status 14:28:45 INFO] writing housekeeping
[Sequencer 14:28:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:28:45 INFO] incremented A scene to 262 completed views
[Sequencer 14:28:45 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:28:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:28:45 INFO] incremented to [AERI set: name H262, 6 scans, 60 angle, D22500 command] set
[sigmove 14:28:45 INFO] A262.SIG(18)
[sigmove 14:28:45 DEBUG] transformed A262Ma.SPC -> A262MA.SPC
[sigmove 14:28:45 DEBUG] transformed A262Mb.SPC -> A262MB.SPC
[sigmove 14:28:45 DEBUG] transformed A262Mc.SPC -> A262MC.SPC
[sigmove 14:28:45 DEBUG] transformed A262Md.SPC -> A262MD.SPC
[sigmove 14:28:45 DEBUG] transformed A262Me.SPC -> A262ME.SPC
[sigmove 14:28:45 DEBUG] transformed A262Mf.SPC -> A262MF.SPC
[Status 14:28:45 INFO] data for A262 transferred to science data processing
[Tidy 14:28:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:28:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:28:45 INFO] resetting WatchDogTimer
[Status 14:28:46 INFO] Starting Set [AERI set: name H262, 6 scans, 60 angle, D22500 command]
[Ingest 14:28:46 INFO] Sending XML status message
[Status 14:28:46 INFO] Mirror angle: 60
[Mirror 14:28:46 INFO] rotating to position H
[Status 14:28:47 INFO] .SET file for ACQ96 ready
[Ingest 14:28:47 INFO] Starting acquisition
[Status 14:28:48 INFO] reading housekeeping
[Status 14:29:06 INFO] acquire complete
[Status 14:29:07 INFO] writing housekeeping
[Sequencer 14:29:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:29:07 INFO] incremented H scene to 262 completed views
[Sequencer 14:29:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:29:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:29:07 INFO] incremented to [AERI set: name S262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:29:07 INFO] H262.SIG(18)
[sigmove 14:29:07 DEBUG] transformed H262Ma.SPC -> H262MA.SPC
[sigmove 14:29:07 DEBUG] transformed H262Mb.SPC -> H262MB.SPC
[sigmove 14:29:07 DEBUG] transformed H262Mc.SPC -> H262MC.SPC
[sigmove 14:29:07 DEBUG] transformed H262Md.SPC -> H262MD.SPC
[sigmove 14:29:07 DEBUG] transformed H262Me.SPC -> H262ME.SPC
[sigmove 14:29:07 DEBUG] transformed H262Mf.SPC -> H262MF.SPC
[Status 14:29:07 INFO] data for H262 transferred to science data processing
[Tidy 14:29:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:29:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:29:07 INFO] resetting WatchDogTimer
[Status 14:29:07 INFO] Starting Set [AERI set: name S262, 6 scans, 0 angle, D16300 command]
[Ingest 14:29:07 INFO] Sending XML status message
[Status 14:29:07 INFO] Mirror angle: 0
[Mirror 14:29:07 INFO] rotating to position S
[Status 14:29:08 INFO] .SET file for ACQ96 ready
[Ingest 14:29:09 INFO] Starting acquisition
[Status 14:29:09 INFO] reading housekeeping
[Status 14:29:27 INFO] acquire complete
[Status 14:29:28 INFO] writing housekeeping
[Sequencer 14:29:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:29:28 INFO] incremented S scene to 262 completed views
[Sequencer 14:29:28 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:29:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:29:28 INFO] incremented to [AERI set: name T262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:29:28 INFO] S262.SIG(18)
[sigmove 14:29:28 DEBUG] transformed S262Ma.SPC -> S262MA.SPC
[sigmove 14:29:28 DEBUG] transformed S262Mb.SPC -> S262MB.SPC
[sigmove 14:29:28 DEBUG] transformed S262Mc.SPC -> S262MC.SPC
[sigmove 14:29:28 DEBUG] transformed S262Md.SPC -> S262MD.SPC
[sigmove 14:29:28 DEBUG] transformed S262Me.SPC -> S262ME.SPC
[sigmove 14:29:28 DEBUG] transformed S262Mf.SPC -> S262MF.SPC
[Status 14:29:28 INFO] data for S262 transferred to science data processing
[Tidy 14:29:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:29:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:29:28 INFO] resetting WatchDogTimer
[Status 14:29:28 INFO] Starting Set [AERI set: name T262, 6 scans, 0 angle, D16300 command]
[Ingest 14:29:28 INFO] Sending XML status message
[Status 14:29:28 INFO] Mirror angle: 0
[Mirror 14:29:29 INFO] rotating to position T
[Status 14:29:29 INFO] .SET file for ACQ96 ready
[Ingest 14:29:29 INFO] Starting acquisition
[Status 14:29:30 INFO] reading housekeeping
[Status 14:29:47 INFO] acquire complete
[Status 14:29:48 INFO] writing housekeeping
[Sequencer 14:29:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:29:48 INFO] incremented T scene to 262 completed views
[Sequencer 14:29:48 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:29:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:29:48 INFO] incremented to [AERI set: name U262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:29:48 INFO] T262.SIG(18)
[sigmove 14:29:48 DEBUG] transformed T262Ma.SPC -> T262MA.SPC
[sigmove 14:29:48 DEBUG] transformed T262Mb.SPC -> T262MB.SPC
[sigmove 14:29:48 DEBUG] transformed T262Mc.SPC -> T262MC.SPC
[sigmove 14:29:48 DEBUG] transformed T262Md.SPC -> T262MD.SPC
[sigmove 14:29:48 DEBUG] transformed T262Me.SPC -> T262ME.SPC
[sigmove 14:29:48 DEBUG] transformed T262Mf.SPC -> T262MF.SPC
[Status 14:29:48 INFO] data for T262 transferred to science data processing
[Tidy 14:29:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:29:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:29:48 INFO] resetting WatchDogTimer
[Status 14:29:49 INFO] Starting Set [AERI set: name U262, 6 scans, 0 angle, D16300 command]
[Ingest 14:29:49 INFO] Sending XML status message
[Status 14:29:49 INFO] Mirror angle: 0
[Mirror 14:29:49 INFO] rotating to position U
[Status 14:29:49 INFO] .SET file for ACQ96 ready
[Ingest 14:29:50 INFO] Starting acquisition
[Status 14:29:50 INFO] reading housekeeping
[Status 14:30:07 INFO] acquire complete
[Status 14:30:08 INFO] writing housekeeping
[Sequencer 14:30:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:30:08 INFO] incremented U scene to 262 completed views
[Sequencer 14:30:08 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:30:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:30:08 INFO] incremented to [AERI set: name V262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:30:08 INFO] U262.SIG(18)
[sigmove 14:30:08 DEBUG] transformed U262Ma.SPC -> U262MA.SPC
[sigmove 14:30:08 DEBUG] transformed U262Mb.SPC -> U262MB.SPC
[sigmove 14:30:08 DEBUG] transformed U262Mc.SPC -> U262MC.SPC
[sigmove 14:30:08 DEBUG] transformed U262Md.SPC -> U262MD.SPC
[sigmove 14:30:08 DEBUG] transformed U262Me.SPC -> U262ME.SPC
[sigmove 14:30:08 DEBUG] transformed U262Mf.SPC -> U262MF.SPC
[Status 14:30:08 INFO] data for U262 transferred to science data processing
[Tidy 14:30:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:30:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:30:08 INFO] resetting WatchDogTimer
[Status 14:30:09 INFO] Starting Set [AERI set: name V262, 6 scans, 0 angle, D16300 command]
[Ingest 14:30:09 INFO] Sending XML status message
[Status 14:30:09 INFO] Mirror angle: 0
[Mirror 14:30:09 INFO] rotating to position V
[Status 14:30:10 INFO] .SET file for ACQ96 ready
[Ingest 14:30:10 INFO] Starting acquisition
[Status 14:30:10 INFO] reading housekeeping
[Status 14:30:28 INFO] acquire complete
[Status 14:30:29 INFO] writing housekeeping
[Sequencer 14:30:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:30:29 INFO] incremented V scene to 262 completed views
[Sequencer 14:30:29 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:30:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:30:29 INFO] incremented to [AERI set: name W262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:30:29 INFO] V262.SIG(18)
[sigmove 14:30:29 DEBUG] transformed V262Ma.SPC -> V262MA.SPC
[sigmove 14:30:29 DEBUG] transformed V262Mb.SPC -> V262MB.SPC
[sigmove 14:30:29 DEBUG] transformed V262Mc.SPC -> V262MC.SPC
[sigmove 14:30:29 DEBUG] transformed V262Md.SPC -> V262MD.SPC
[sigmove 14:30:29 DEBUG] transformed V262Me.SPC -> V262ME.SPC
[sigmove 14:30:29 DEBUG] transformed V262Mf.SPC -> V262MF.SPC
[Status 14:30:29 INFO] data for V262 transferred to science data processing
[Tidy 14:30:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:30:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:30:29 INFO] resetting WatchDogTimer
[Status 14:30:29 INFO] Starting Set [AERI set: name W262, 6 scans, 0 angle, D16300 command]
[Ingest 14:30:29 INFO] Sending XML status message
[Status 14:30:29 INFO] Mirror angle: 0
[Mirror 14:30:29 INFO] rotating to position W
[Status 14:30:30 INFO] .SET file for ACQ96 ready
[Ingest 14:30:30 INFO] Starting acquisition
[Status 14:30:30 INFO] reading housekeeping
[Status 14:30:48 INFO] acquire complete
[Status 14:30:49 INFO] writing housekeeping
[Sequencer 14:30:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:30:49 INFO] incremented W scene to 262 completed views
[Sequencer 14:30:49 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:30:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:30:49 INFO] incremented to [AERI set: name X262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:30:49 INFO] W262.SIG(18)
[sigmove 14:30:49 DEBUG] transformed W262Ma.SPC -> W262MA.SPC
[sigmove 14:30:49 DEBUG] transformed W262Mb.SPC -> W262MB.SPC
[sigmove 14:30:49 DEBUG] transformed W262Mc.SPC -> W262MC.SPC
[sigmove 14:30:49 DEBUG] transformed W262Md.SPC -> W262MD.SPC
[sigmove 14:30:49 DEBUG] transformed W262Me.SPC -> W262ME.SPC
[sigmove 14:30:49 DEBUG] transformed W262Mf.SPC -> W262MF.SPC
[Status 14:30:49 INFO] data for W262 transferred to science data processing
[Tidy 14:30:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:30:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:30:49 INFO] resetting WatchDogTimer
[Status 14:30:49 INFO] Starting Set [AERI set: name X262, 6 scans, 0 angle, D16300 command]
[Ingest 14:30:49 INFO] Sending XML status message
[Status 14:30:49 INFO] Mirror angle: 0
[Mirror 14:30:49 INFO] rotating to position X
[Status 14:30:50 INFO] .SET file for ACQ96 ready
[Ingest 14:30:50 INFO] Starting acquisition
[Status 14:30:51 INFO] reading housekeeping
[Status 14:31:08 INFO] acquire complete
[Status 14:31:09 INFO] writing housekeeping
[Sequencer 14:31:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:31:09 INFO] incremented X scene to 262 completed views
[Sequencer 14:31:09 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:31:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:31:09 INFO] incremented to [AERI set: name Y262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:31:09 INFO] X262.SIG(18)
[sigmove 14:31:09 DEBUG] transformed X262Ma.SPC -> X262MA.SPC
[sigmove 14:31:09 DEBUG] transformed X262Mb.SPC -> X262MB.SPC
[sigmove 14:31:09 DEBUG] transformed X262Mc.SPC -> X262MC.SPC
[sigmove 14:31:09 DEBUG] transformed X262Md.SPC -> X262MD.SPC
[sigmove 14:31:09 DEBUG] transformed X262Me.SPC -> X262ME.SPC
[sigmove 14:31:09 DEBUG] transformed X262Mf.SPC -> X262MF.SPC
[Status 14:31:09 INFO] data for X262 transferred to science data processing
[Tidy 14:31:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:31:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:31:09 INFO] resetting WatchDogTimer
[Status 14:31:09 INFO] Starting Set [AERI set: name Y262, 6 scans, 0 angle, D16300 command]
[Ingest 14:31:09 INFO] Sending XML status message
[Status 14:31:09 INFO] Mirror angle: 0
[Mirror 14:31:10 INFO] rotating to position Y
[Status 14:31:10 INFO] .SET file for ACQ96 ready
[Ingest 14:31:10 INFO] Starting acquisition
[Status 14:31:11 INFO] reading housekeeping
[Status 14:31:28 INFO] acquire complete
[Status 14:31:29 INFO] writing housekeeping
[Sequencer 14:31:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:31:29 INFO] incremented Y scene to 262 completed views
[Sequencer 14:31:29 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:31:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:31:29 INFO] incremented to [AERI set: name Z262, 6 scans, 0 angle, D16300 command] set
[sigmove 14:31:29 INFO] Y262.SIG(18)
[sigmove 14:31:29 DEBUG] transformed Y262Ma.SPC -> Y262MA.SPC
[sigmove 14:31:29 DEBUG] transformed Y262Mb.SPC -> Y262MB.SPC
[sigmove 14:31:29 DEBUG] transformed Y262Mc.SPC -> Y262MC.SPC
[sigmove 14:31:29 DEBUG] transformed Y262Md.SPC -> Y262MD.SPC
[sigmove 14:31:29 DEBUG] transformed Y262Me.SPC -> Y262ME.SPC
[sigmove 14:31:29 DEBUG] transformed Y262Mf.SPC -> Y262MF.SPC
[Status 14:31:29 INFO] data for Y262 transferred to science data processing
[Tidy 14:31:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:31:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:31:29 INFO] resetting WatchDogTimer
[Status 14:31:30 INFO] Starting Set [AERI set: name Z262, 6 scans, 0 angle, D16300 command]
[Ingest 14:31:30 INFO] Sending XML status message
[Status 14:31:30 INFO] Mirror angle: 0
[Mirror 14:31:30 INFO] rotating to position Z
[Status 14:31:30 INFO] .SET file for ACQ96 ready
[Ingest 14:31:31 INFO] Starting acquisition
[Status 14:31:31 INFO] reading housekeeping
[Status 14:31:48 INFO] acquire complete
[Status 14:31:49 INFO] writing housekeeping
[Sequencer 14:31:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:31:49 INFO] incremented Z scene to 262 completed views
[Sequencer 14:31:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:31:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:31:49 INFO] incremented to [AERI set: name H263, 6 scans, 60 angle, D22500 command] set
[sigmove 14:31:49 INFO] Z262.SIG(18)
[sigmove 14:31:49 DEBUG] transformed Z262Ma.SPC -> Z262MA.SPC
[sigmove 14:31:49 DEBUG] transformed Z262Mb.SPC -> Z262MB.SPC
[sigmove 14:31:49 DEBUG] transformed Z262Mc.SPC -> Z262MC.SPC
[sigmove 14:31:49 DEBUG] transformed Z262Md.SPC -> Z262MD.SPC
[sigmove 14:31:49 DEBUG] transformed Z262Me.SPC -> Z262ME.SPC
[sigmove 14:31:49 DEBUG] transformed Z262Mf.SPC -> Z262MF.SPC
[Status 14:31:49 INFO] data for Z262 transferred to science data processing
[Tidy 14:31:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:31:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:31:49 INFO] resetting WatchDogTimer
[Status 14:31:50 INFO] Starting Set [AERI set: name H263, 6 scans, 60 angle, D22500 command]
[Ingest 14:31:50 INFO] Sending XML status message
[Status 14:31:50 INFO] Mirror angle: 60
[Mirror 14:31:50 INFO] rotating to position H
[Status 14:31:51 INFO] .SET file for ACQ96 ready
[Ingest 14:31:51 INFO] Starting acquisition
[Status 14:31:52 INFO] reading housekeeping
[Status 14:32:10 INFO] acquire complete
[Status 14:32:11 INFO] writing housekeeping
[Sequencer 14:32:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:32:11 INFO] incremented H scene to 263 completed views
[Sequencer 14:32:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:32:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:32:11 INFO] incremented to [AERI set: name A263, 6 scans, 120 angle, D28300 command] set
[sigmove 14:32:11 INFO] H263.SIG(18)
[sigmove 14:32:11 DEBUG] transformed H263Ma.SPC -> H263MA.SPC
[sigmove 14:32:11 DEBUG] transformed H263Mb.SPC -> H263MB.SPC
[sigmove 14:32:11 DEBUG] transformed H263Mc.SPC -> H263MC.SPC
[sigmove 14:32:11 DEBUG] transformed H263Md.SPC -> H263MD.SPC
[sigmove 14:32:11 DEBUG] transformed H263Me.SPC -> H263ME.SPC
[sigmove 14:32:11 DEBUG] transformed H263Mf.SPC -> H263MF.SPC
[Status 14:32:11 INFO] data for H263 transferred to science data processing
[Tidy 14:32:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:32:11 INFO] A261.FIN(19),H261.FIN(19),S261.FIN(19),T261.FIN(19),U261.FIN(19),V261.FIN(19),W261.FIN(19),X261.FIN(19),Y261.FIN(19),Z261.FIN(19),A262.FIN(19),H262.FIN(19),S262.FIN(19),T262.FIN(19),U262.FIN(19),V262.FIN(19),W262.FIN(19),X262.FIN(19),Y262.FIN(19),Z262.FIN(19)
[sigmove 14:32:11 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:32:11 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:32:15 DEBUG] done zipping
[WatchDog 14:32:16 INFO] resetting WatchDogTimer
[Status 14:32:16 INFO] Starting Set [AERI set: name A263, 6 scans, 120 angle, D28300 command]
[Ingest 14:32:16 INFO] Sending XML status message
[Status 14:32:16 INFO] Mirror angle: 120
[Mirror 14:32:16 INFO] rotating to position A
[Status 14:32:17 INFO] .SET file for ACQ96 ready
[Ingest 14:32:18 INFO] Starting acquisition
[Status 14:32:18 INFO] reading housekeeping
[Status 14:32:36 INFO] acquire complete
[Status 14:32:36 INFO] writing housekeeping
[Sequencer 14:32:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:32:36 INFO] incremented A scene to 263 completed views
[Sequencer 14:32:36 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:32:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:32:36 INFO] incremented to [AERI set: name S263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:32:36 INFO] A263.SIG(18)
[sigmove 14:32:36 DEBUG] transformed A263Ma.SPC -> A263MA.SPC
[sigmove 14:32:36 DEBUG] transformed A263Mb.SPC -> A263MB.SPC
[sigmove 14:32:36 DEBUG] transformed A263Mc.SPC -> A263MC.SPC
[sigmove 14:32:36 DEBUG] transformed A263Md.SPC -> A263MD.SPC
[sigmove 14:32:36 DEBUG] transformed A263Me.SPC -> A263ME.SPC
[sigmove 14:32:36 DEBUG] transformed A263Mf.SPC -> A263MF.SPC
[Status 14:32:36 INFO] data for A263 transferred to science data processing
[Tidy 14:32:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:32:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:32:36 INFO] resetting WatchDogTimer
[Status 14:32:37 INFO] Starting Set [AERI set: name S263, 6 scans, 0 angle, D16300 command]
[Ingest 14:32:37 INFO] Sending XML status message
[Status 14:32:37 INFO] Mirror angle: 0
[Mirror 14:32:37 INFO] rotating to position S
[Status 14:32:39 INFO] .SET file for ACQ96 ready
[Ingest 14:32:39 INFO] Starting acquisition
[Status 14:32:39 INFO] reading housekeeping
[Status 14:32:57 INFO] acquire complete
[Status 14:32:58 INFO] writing housekeeping
[Sequencer 14:32:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:32:58 INFO] incremented S scene to 263 completed views
[Sequencer 14:32:58 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:32:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:32:58 INFO] incremented to [AERI set: name T263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:32:58 INFO] S263.SIG(18)
[sigmove 14:32:58 DEBUG] transformed S263Ma.SPC -> S263MA.SPC
[sigmove 14:32:58 DEBUG] transformed S263Mb.SPC -> S263MB.SPC
[sigmove 14:32:58 DEBUG] transformed S263Mc.SPC -> S263MC.SPC
[sigmove 14:32:58 DEBUG] transformed S263Md.SPC -> S263MD.SPC
[sigmove 14:32:58 DEBUG] transformed S263Me.SPC -> S263ME.SPC
[sigmove 14:32:58 DEBUG] transformed S263Mf.SPC -> S263MF.SPC
[Status 14:32:58 INFO] data for S263 transferred to science data processing
[Tidy 14:32:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:32:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:32:58 INFO] resetting WatchDogTimer
[Status 14:32:58 INFO] Starting Set [AERI set: name T263, 6 scans, 0 angle, D16300 command]
[Ingest 14:32:58 INFO] Sending XML status message
[Status 14:32:58 INFO] Mirror angle: 0
[Mirror 14:32:58 INFO] rotating to position T
[Status 14:32:59 INFO] .SET file for ACQ96 ready
[Ingest 14:32:59 INFO] Starting acquisition
[Status 14:33:00 INFO] reading housekeeping
[Status 14:33:17 INFO] acquire complete
[Status 14:33:18 INFO] writing housekeeping
[Sequencer 14:33:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:33:18 INFO] incremented T scene to 263 completed views
[Sequencer 14:33:18 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:33:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:33:18 INFO] incremented to [AERI set: name U263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:33:18 INFO] T263.SIG(18)
[sigmove 14:33:18 DEBUG] transformed T263Ma.SPC -> T263MA.SPC
[sigmove 14:33:18 DEBUG] transformed T263Mb.SPC -> T263MB.SPC
[sigmove 14:33:18 DEBUG] transformed T263Mc.SPC -> T263MC.SPC
[sigmove 14:33:18 DEBUG] transformed T263Md.SPC -> T263MD.SPC
[sigmove 14:33:18 DEBUG] transformed T263Me.SPC -> T263ME.SPC
[sigmove 14:33:18 DEBUG] transformed T263Mf.SPC -> T263MF.SPC
[Status 14:33:18 INFO] data for T263 transferred to science data processing
[Tidy 14:33:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:33:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:33:18 INFO] resetting WatchDogTimer
[Status 14:33:18 INFO] Starting Set [AERI set: name U263, 6 scans, 0 angle, D16300 command]
[Ingest 14:33:18 INFO] Sending XML status message
[Status 14:33:18 INFO] Mirror angle: 0
[Mirror 14:33:19 INFO] rotating to position U
[Status 14:33:19 INFO] .SET file for ACQ96 ready
[Ingest 14:33:19 INFO] Starting acquisition
[Status 14:33:20 INFO] reading housekeeping
[Status 14:33:37 INFO] acquire complete
[Status 14:33:38 INFO] writing housekeeping
[Sequencer 14:33:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:33:38 INFO] incremented U scene to 263 completed views
[Sequencer 14:33:38 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:33:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:33:38 INFO] incremented to [AERI set: name V263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:33:38 INFO] U263.SIG(18)
[sigmove 14:33:38 DEBUG] transformed U263Ma.SPC -> U263MA.SPC
[sigmove 14:33:38 DEBUG] transformed U263Mb.SPC -> U263MB.SPC
[sigmove 14:33:38 DEBUG] transformed U263Mc.SPC -> U263MC.SPC
[sigmove 14:33:38 DEBUG] transformed U263Md.SPC -> U263MD.SPC
[sigmove 14:33:38 DEBUG] transformed U263Me.SPC -> U263ME.SPC
[sigmove 14:33:38 DEBUG] transformed U263Mf.SPC -> U263MF.SPC
[Status 14:33:38 INFO] data for U263 transferred to science data processing
[Tidy 14:33:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:33:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:33:38 INFO] resetting WatchDogTimer
[Status 14:33:39 INFO] Starting Set [AERI set: name V263, 6 scans, 0 angle, D16300 command]
[Ingest 14:33:39 INFO] Sending XML status message
[Status 14:33:39 INFO] Mirror angle: 0
[Mirror 14:33:39 INFO] rotating to position V
[Status 14:33:39 INFO] .SET file for ACQ96 ready
[Ingest 14:33:40 INFO] Starting acquisition
[Status 14:33:40 INFO] reading housekeeping
[Status 14:33:57 INFO] acquire complete
[Status 14:33:58 INFO] writing housekeeping
[Sequencer 14:33:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:33:58 INFO] incremented V scene to 263 completed views
[Sequencer 14:33:58 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:33:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:33:58 INFO] incremented to [AERI set: name W263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:33:58 INFO] V263.SIG(18)
[sigmove 14:33:58 DEBUG] transformed V263Ma.SPC -> V263MA.SPC
[sigmove 14:33:58 DEBUG] transformed V263Mb.SPC -> V263MB.SPC
[sigmove 14:33:58 DEBUG] transformed V263Mc.SPC -> V263MC.SPC
[sigmove 14:33:58 DEBUG] transformed V263Md.SPC -> V263MD.SPC
[sigmove 14:33:58 DEBUG] transformed V263Me.SPC -> V263ME.SPC
[sigmove 14:33:58 DEBUG] transformed V263Mf.SPC -> V263MF.SPC
[Status 14:33:58 INFO] data for V263 transferred to science data processing
[Tidy 14:33:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:33:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:33:58 INFO] resetting WatchDogTimer
[Status 14:33:59 INFO] Starting Set [AERI set: name W263, 6 scans, 0 angle, D16300 command]
[Ingest 14:33:59 INFO] Sending XML status message
[Status 14:33:59 INFO] Mirror angle: 0
[Mirror 14:33:59 INFO] rotating to position W
[Status 14:34:00 INFO] .SET file for ACQ96 ready
[Ingest 14:34:00 INFO] Starting acquisition
[Status 14:34:00 INFO] reading housekeeping
[Status 14:34:18 INFO] acquire complete
[Status 14:34:19 INFO] writing housekeeping
[Sequencer 14:34:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:34:19 INFO] incremented W scene to 263 completed views
[Sequencer 14:34:19 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:34:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:34:19 INFO] incremented to [AERI set: name X263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:34:19 INFO] W263.SIG(18)
[sigmove 14:34:19 DEBUG] transformed W263Ma.SPC -> W263MA.SPC
[sigmove 14:34:19 DEBUG] transformed W263Mb.SPC -> W263MB.SPC
[sigmove 14:34:19 DEBUG] transformed W263Mc.SPC -> W263MC.SPC
[sigmove 14:34:19 DEBUG] transformed W263Md.SPC -> W263MD.SPC
[sigmove 14:34:19 DEBUG] transformed W263Me.SPC -> W263ME.SPC
[sigmove 14:34:19 DEBUG] transformed W263Mf.SPC -> W263MF.SPC
[Status 14:34:19 INFO] data for W263 transferred to science data processing
[Tidy 14:34:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:34:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:34:19 INFO] resetting WatchDogTimer
[Status 14:34:19 INFO] Starting Set [AERI set: name X263, 6 scans, 0 angle, D16300 command]
[Ingest 14:34:19 INFO] Sending XML status message
[Status 14:34:19 INFO] Mirror angle: 0
[Mirror 14:34:19 INFO] rotating to position X
[Status 14:34:20 INFO] .SET file for ACQ96 ready
[Ingest 14:34:20 INFO] Starting acquisition
[Status 14:34:20 INFO] reading housekeeping
[Status 14:34:38 INFO] acquire complete
[Status 14:34:39 INFO] writing housekeeping
[Sequencer 14:34:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:34:39 INFO] incremented X scene to 263 completed views
[Sequencer 14:34:39 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:34:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:34:39 INFO] incremented to [AERI set: name Y263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:34:39 INFO] X263.SIG(18)
[sigmove 14:34:39 DEBUG] transformed X263Ma.SPC -> X263MA.SPC
[sigmove 14:34:39 DEBUG] transformed X263Mb.SPC -> X263MB.SPC
[sigmove 14:34:39 DEBUG] transformed X263Mc.SPC -> X263MC.SPC
[sigmove 14:34:39 DEBUG] transformed X263Md.SPC -> X263MD.SPC
[sigmove 14:34:39 DEBUG] transformed X263Me.SPC -> X263ME.SPC
[sigmove 14:34:39 DEBUG] transformed X263Mf.SPC -> X263MF.SPC
[Status 14:34:39 INFO] data for X263 transferred to science data processing
[Tidy 14:34:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:34:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:34:39 INFO] resetting WatchDogTimer
[Status 14:34:39 INFO] Starting Set [AERI set: name Y263, 6 scans, 0 angle, D16300 command]
[Ingest 14:34:39 INFO] Sending XML status message
[Status 14:34:39 INFO] Mirror angle: 0
[Mirror 14:34:39 INFO] rotating to position Y
[Status 14:34:40 INFO] .SET file for ACQ96 ready
[Ingest 14:34:40 INFO] Starting acquisition
[Status 14:34:41 INFO] reading housekeeping
[Status 14:34:58 INFO] acquire complete
[Status 14:34:59 INFO] writing housekeeping
[Sequencer 14:34:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:34:59 INFO] incremented Y scene to 263 completed views
[Sequencer 14:34:59 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:34:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:34:59 INFO] incremented to [AERI set: name Z263, 6 scans, 0 angle, D16300 command] set
[sigmove 14:34:59 INFO] Y263.SIG(18)
[sigmove 14:34:59 DEBUG] transformed Y263Ma.SPC -> Y263MA.SPC
[sigmove 14:34:59 DEBUG] transformed Y263Mb.SPC -> Y263MB.SPC
[sigmove 14:34:59 DEBUG] transformed Y263Mc.SPC -> Y263MC.SPC
[sigmove 14:34:59 DEBUG] transformed Y263Md.SPC -> Y263MD.SPC
[sigmove 14:34:59 DEBUG] transformed Y263Me.SPC -> Y263ME.SPC
[sigmove 14:34:59 DEBUG] transformed Y263Mf.SPC -> Y263MF.SPC
[Status 14:34:59 INFO] data for Y263 transferred to science data processing
[Tidy 14:34:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:34:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:34:59 INFO] resetting WatchDogTimer
[Status 14:34:59 INFO] Starting Set [AERI set: name Z263, 6 scans, 0 angle, D16300 command]
[Ingest 14:34:59 INFO] Sending XML status message
[Status 14:34:59 INFO] Mirror angle: 0
[Mirror 14:35:00 INFO] rotating to position Z
[Status 14:35:00 INFO] .SET file for ACQ96 ready
[Ingest 14:35:00 INFO] Starting acquisition
[Status 14:35:01 INFO] reading housekeeping
[Status 14:35:18 INFO] acquire complete
[Status 14:35:19 INFO] writing housekeeping
[Sequencer 14:35:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:35:19 INFO] incremented Z scene to 263 completed views
[Sequencer 14:35:19 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:35:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:35:19 INFO] incremented to [AERI set: name A264, 6 scans, 120 angle, D28300 command] set
[sigmove 14:35:19 INFO] Z263.SIG(18)
[sigmove 14:35:19 DEBUG] transformed Z263Ma.SPC -> Z263MA.SPC
[sigmove 14:35:19 DEBUG] transformed Z263Mb.SPC -> Z263MB.SPC
[sigmove 14:35:19 DEBUG] transformed Z263Mc.SPC -> Z263MC.SPC
[sigmove 14:35:19 DEBUG] transformed Z263Md.SPC -> Z263MD.SPC
[sigmove 14:35:19 DEBUG] transformed Z263Me.SPC -> Z263ME.SPC
[sigmove 14:35:19 DEBUG] transformed Z263Mf.SPC -> Z263MF.SPC
[Status 14:35:19 INFO] data for Z263 transferred to science data processing
[Tidy 14:35:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:35:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:35:19 INFO] resetting WatchDogTimer
[Status 14:35:19 INFO] Starting Set [AERI set: name A264, 6 scans, 120 angle, D28300 command]
[Ingest 14:35:19 INFO] Sending XML status message
[Status 14:35:19 INFO] Mirror angle: 120
[Mirror 14:35:20 INFO] rotating to position A
[Status 14:35:21 INFO] .SET file for ACQ96 ready
[Ingest 14:35:22 INFO] Starting acquisition
[Status 14:35:22 INFO] reading housekeeping
[Status 14:35:40 INFO] acquire complete
[Status 14:35:40 INFO] writing housekeeping
[Sequencer 14:35:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:35:40 INFO] incremented A scene to 264 completed views
[Sequencer 14:35:40 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:35:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:35:40 INFO] incremented to [AERI set: name H264, 6 scans, 60 angle, D22500 command] set
[sigmove 14:35:40 INFO] A264.SIG(18)
[sigmove 14:35:40 DEBUG] transformed A264Ma.SPC -> A264MA.SPC
[sigmove 14:35:40 DEBUG] transformed A264Mb.SPC -> A264MB.SPC
[sigmove 14:35:40 DEBUG] transformed A264Mc.SPC -> A264MC.SPC
[sigmove 14:35:40 DEBUG] transformed A264Md.SPC -> A264MD.SPC
[sigmove 14:35:40 DEBUG] transformed A264Me.SPC -> A264ME.SPC
[sigmove 14:35:40 DEBUG] transformed A264Mf.SPC -> A264MF.SPC
[Status 14:35:40 INFO] data for A264 transferred to science data processing
[Tidy 14:35:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:35:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:35:40 INFO] resetting WatchDogTimer
[Status 14:35:41 INFO] Starting Set [AERI set: name H264, 6 scans, 60 angle, D22500 command]
[Ingest 14:35:41 INFO] Sending XML status message
[Status 14:35:41 INFO] Mirror angle: 60
[Mirror 14:35:41 INFO] rotating to position H
[Status 14:35:42 INFO] .SET file for ACQ96 ready
[Ingest 14:35:42 INFO] Starting acquisition
[Status 14:35:43 INFO] reading housekeeping
[Status 14:36:01 INFO] acquire complete
[Status 14:36:02 INFO] writing housekeeping
[Sequencer 14:36:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:36:02 INFO] incremented H scene to 264 completed views
[Sequencer 14:36:02 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:36:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:36:02 INFO] incremented to [AERI set: name S264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:36:02 INFO] H264.SIG(18)
[sigmove 14:36:02 DEBUG] transformed H264Ma.SPC -> H264MA.SPC
[sigmove 14:36:02 DEBUG] transformed H264Mb.SPC -> H264MB.SPC
[sigmove 14:36:02 DEBUG] transformed H264Mc.SPC -> H264MC.SPC
[sigmove 14:36:02 DEBUG] transformed H264Md.SPC -> H264MD.SPC
[sigmove 14:36:02 DEBUG] transformed H264Me.SPC -> H264ME.SPC
[sigmove 14:36:02 DEBUG] transformed H264Mf.SPC -> H264MF.SPC
[Status 14:36:02 INFO] data for H264 transferred to science data processing
[Tidy 14:36:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:36:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:36:02 INFO] resetting WatchDogTimer
[Status 14:36:02 INFO] Starting Set [AERI set: name S264, 6 scans, 0 angle, D16300 command]
[Ingest 14:36:02 INFO] Sending XML status message
[Status 14:36:02 INFO] Mirror angle: 0
[Mirror 14:36:03 INFO] rotating to position S
[Status 14:36:04 INFO] .SET file for ACQ96 ready
[Ingest 14:36:04 INFO] Starting acquisition
[Status 14:36:04 INFO] reading housekeeping
[Status 14:36:22 INFO] acquire complete
[Status 14:36:23 INFO] writing housekeeping
[Sequencer 14:36:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:36:23 INFO] incremented S scene to 264 completed views
[Sequencer 14:36:23 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:36:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:36:23 INFO] incremented to [AERI set: name T264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:36:23 INFO] S264.SIG(18)
[sigmove 14:36:23 DEBUG] transformed S264Ma.SPC -> S264MA.SPC
[sigmove 14:36:23 DEBUG] transformed S264Mb.SPC -> S264MB.SPC
[sigmove 14:36:23 DEBUG] transformed S264Mc.SPC -> S264MC.SPC
[sigmove 14:36:23 DEBUG] transformed S264Md.SPC -> S264MD.SPC
[sigmove 14:36:23 DEBUG] transformed S264Me.SPC -> S264ME.SPC
[sigmove 14:36:23 DEBUG] transformed S264Mf.SPC -> S264MF.SPC
[Status 14:36:23 INFO] data for S264 transferred to science data processing
[Tidy 14:36:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:36:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:36:23 INFO] resetting WatchDogTimer
[Status 14:36:23 INFO] Starting Set [AERI set: name T264, 6 scans, 0 angle, D16300 command]
[Ingest 14:36:23 INFO] Sending XML status message
[Status 14:36:23 INFO] Mirror angle: 0
[Mirror 14:36:24 INFO] rotating to position T
[Status 14:36:24 INFO] .SET file for ACQ96 ready
[Ingest 14:36:25 INFO] Starting acquisition
[Status 14:36:25 INFO] reading housekeeping
[Status 14:36:42 INFO] acquire complete
[Status 14:36:43 INFO] writing housekeeping
[Sequencer 14:36:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:36:43 INFO] incremented T scene to 264 completed views
[Sequencer 14:36:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:36:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:36:43 INFO] incremented to [AERI set: name U264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:36:43 INFO] T264.SIG(18)
[sigmove 14:36:43 DEBUG] transformed T264Ma.SPC -> T264MA.SPC
[sigmove 14:36:43 DEBUG] transformed T264Mb.SPC -> T264MB.SPC
[sigmove 14:36:43 DEBUG] transformed T264Mc.SPC -> T264MC.SPC
[sigmove 14:36:43 DEBUG] transformed T264Md.SPC -> T264MD.SPC
[sigmove 14:36:43 DEBUG] transformed T264Me.SPC -> T264ME.SPC
[sigmove 14:36:43 DEBUG] transformed T264Mf.SPC -> T264MF.SPC
[Status 14:36:43 INFO] data for T264 transferred to science data processing
[Tidy 14:36:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:36:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:36:43 INFO] resetting WatchDogTimer
[Status 14:36:44 INFO] Starting Set [AERI set: name U264, 6 scans, 0 angle, D16300 command]
[Ingest 14:36:44 INFO] Sending XML status message
[Status 14:36:44 INFO] Mirror angle: 0
[Mirror 14:36:44 INFO] rotating to position U
[Status 14:36:44 INFO] .SET file for ACQ96 ready
[Ingest 14:36:45 INFO] Starting acquisition
[Status 14:36:45 INFO] reading housekeeping
[Status 14:37:03 INFO] acquire complete
[Status 14:37:03 INFO] writing housekeeping
[Sequencer 14:37:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:37:03 INFO] incremented U scene to 264 completed views
[Sequencer 14:37:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:37:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:37:03 INFO] incremented to [AERI set: name V264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:37:03 INFO] U264.SIG(18)
[sigmove 14:37:03 DEBUG] transformed U264Ma.SPC -> U264MA.SPC
[sigmove 14:37:03 DEBUG] transformed U264Mb.SPC -> U264MB.SPC
[sigmove 14:37:03 DEBUG] transformed U264Mc.SPC -> U264MC.SPC
[sigmove 14:37:03 DEBUG] transformed U264Md.SPC -> U264MD.SPC
[sigmove 14:37:03 DEBUG] transformed U264Me.SPC -> U264ME.SPC
[sigmove 14:37:03 DEBUG] transformed U264Mf.SPC -> U264MF.SPC
[Status 14:37:04 INFO] data for U264 transferred to science data processing
[Tidy 14:37:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:37:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:37:04 INFO] resetting WatchDogTimer
[Status 14:37:04 INFO] Starting Set [AERI set: name V264, 6 scans, 0 angle, D16300 command]
[Ingest 14:37:04 INFO] Sending XML status message
[Status 14:37:04 INFO] Mirror angle: 0
[Mirror 14:37:04 INFO] rotating to position V
[Status 14:37:05 INFO] .SET file for ACQ96 ready
[Ingest 14:37:05 INFO] Starting acquisition
[Status 14:37:05 INFO] reading housekeeping
[Status 14:37:23 INFO] acquire complete
[Status 14:37:24 INFO] writing housekeeping
[Sequencer 14:37:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:37:24 INFO] incremented V scene to 264 completed views
[Sequencer 14:37:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:37:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:37:24 INFO] incremented to [AERI set: name W264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:37:24 INFO] V264.SIG(18)
[sigmove 14:37:24 DEBUG] transformed V264Ma.SPC -> V264MA.SPC
[sigmove 14:37:24 DEBUG] transformed V264Mb.SPC -> V264MB.SPC
[sigmove 14:37:24 DEBUG] transformed V264Mc.SPC -> V264MC.SPC
[sigmove 14:37:24 DEBUG] transformed V264Md.SPC -> V264MD.SPC
[sigmove 14:37:24 DEBUG] transformed V264Me.SPC -> V264ME.SPC
[sigmove 14:37:24 DEBUG] transformed V264Mf.SPC -> V264MF.SPC
[Status 14:37:24 INFO] data for V264 transferred to science data processing
[Tidy 14:37:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:37:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:37:24 INFO] resetting WatchDogTimer
[Status 14:37:24 INFO] Starting Set [AERI set: name W264, 6 scans, 0 angle, D16300 command]
[Ingest 14:37:24 INFO] Sending XML status message
[Status 14:37:24 INFO] Mirror angle: 0
[Mirror 14:37:24 INFO] rotating to position W
[Status 14:37:25 INFO] .SET file for ACQ96 ready
[Ingest 14:37:25 INFO] Starting acquisition
[Status 14:37:25 INFO] reading housekeeping
[Status 14:37:43 INFO] acquire complete
[Status 14:37:44 INFO] writing housekeeping
[Sequencer 14:37:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:37:44 INFO] incremented W scene to 264 completed views
[Sequencer 14:37:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:37:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:37:44 INFO] incremented to [AERI set: name X264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:37:44 INFO] W264.SIG(18)
[sigmove 14:37:44 DEBUG] transformed W264Ma.SPC -> W264MA.SPC
[sigmove 14:37:44 DEBUG] transformed W264Mb.SPC -> W264MB.SPC
[sigmove 14:37:44 DEBUG] transformed W264Mc.SPC -> W264MC.SPC
[sigmove 14:37:44 DEBUG] transformed W264Md.SPC -> W264MD.SPC
[sigmove 14:37:44 DEBUG] transformed W264Me.SPC -> W264ME.SPC
[sigmove 14:37:44 DEBUG] transformed W264Mf.SPC -> W264MF.SPC
[Status 14:37:44 INFO] data for W264 transferred to science data processing
[Tidy 14:37:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:37:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:37:44 INFO] resetting WatchDogTimer
[Status 14:37:44 INFO] Starting Set [AERI set: name X264, 6 scans, 0 angle, D16300 command]
[Ingest 14:37:44 INFO] Sending XML status message
[Status 14:37:44 INFO] Mirror angle: 0
[Mirror 14:37:45 INFO] rotating to position X
[Status 14:37:45 INFO] .SET file for ACQ96 ready
[Ingest 14:37:45 INFO] Starting acquisition
[Status 14:37:46 INFO] reading housekeeping
[Status 14:38:03 INFO] acquire complete
[Status 14:38:04 INFO] writing housekeeping
[Sequencer 14:38:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:38:04 INFO] incremented X scene to 264 completed views
[Sequencer 14:38:04 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:38:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:38:04 INFO] incremented to [AERI set: name Y264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:38:04 INFO] X264.SIG(18)
[sigmove 14:38:04 DEBUG] transformed X264Ma.SPC -> X264MA.SPC
[sigmove 14:38:04 DEBUG] transformed X264Mb.SPC -> X264MB.SPC
[sigmove 14:38:04 DEBUG] transformed X264Mc.SPC -> X264MC.SPC
[sigmove 14:38:04 DEBUG] transformed X264Md.SPC -> X264MD.SPC
[sigmove 14:38:04 DEBUG] transformed X264Me.SPC -> X264ME.SPC
[sigmove 14:38:04 DEBUG] transformed X264Mf.SPC -> X264MF.SPC
[Status 14:38:04 INFO] data for X264 transferred to science data processing
[Tidy 14:38:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:38:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:38:04 INFO] resetting WatchDogTimer
[Status 14:38:04 INFO] Starting Set [AERI set: name Y264, 6 scans, 0 angle, D16300 command]
[Ingest 14:38:04 INFO] Sending XML status message
[Status 14:38:04 INFO] Mirror angle: 0
[Mirror 14:38:05 INFO] rotating to position Y
[Status 14:38:05 INFO] .SET file for ACQ96 ready
[Ingest 14:38:05 INFO] Starting acquisition
[Status 14:38:06 INFO] reading housekeeping
[Status 14:38:23 INFO] acquire complete
[Status 14:38:24 INFO] writing housekeeping
[Sequencer 14:38:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:38:24 INFO] incremented Y scene to 264 completed views
[Sequencer 14:38:24 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:38:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:38:24 INFO] incremented to [AERI set: name Z264, 6 scans, 0 angle, D16300 command] set
[sigmove 14:38:24 INFO] Y264.SIG(18)
[sigmove 14:38:24 DEBUG] transformed Y264Ma.SPC -> Y264MA.SPC
[sigmove 14:38:24 DEBUG] transformed Y264Mb.SPC -> Y264MB.SPC
[sigmove 14:38:24 DEBUG] transformed Y264Mc.SPC -> Y264MC.SPC
[sigmove 14:38:24 DEBUG] transformed Y264Md.SPC -> Y264MD.SPC
[sigmove 14:38:24 DEBUG] transformed Y264Me.SPC -> Y264ME.SPC
[sigmove 14:38:24 DEBUG] transformed Y264Mf.SPC -> Y264MF.SPC
[Status 14:38:24 INFO] data for Y264 transferred to science data processing
[Tidy 14:38:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:38:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:38:24 INFO] resetting WatchDogTimer
[Status 14:38:25 INFO] Starting Set [AERI set: name Z264, 6 scans, 0 angle, D16300 command]
[Ingest 14:38:25 INFO] Sending XML status message
[Status 14:38:25 INFO] Mirror angle: 0
[Mirror 14:38:25 INFO] rotating to position Z
[Status 14:38:25 INFO] .SET file for ACQ96 ready
[Ingest 14:38:26 INFO] Starting acquisition
[Status 14:38:26 INFO] reading housekeeping
[Status 14:38:44 INFO] acquire complete
[Status 14:38:44 INFO] writing housekeeping
[Sequencer 14:38:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:38:44 INFO] incremented Z scene to 264 completed views
[Sequencer 14:38:44 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:38:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:38:44 INFO] incremented to [AERI set: name H265, 6 scans, 60 angle, D22500 command] set
[sigmove 14:38:44 INFO] Z264.SIG(18)
[sigmove 14:38:44 DEBUG] transformed Z264Ma.SPC -> Z264MA.SPC
[sigmove 14:38:44 DEBUG] transformed Z264Mb.SPC -> Z264MB.SPC
[sigmove 14:38:44 DEBUG] transformed Z264Mc.SPC -> Z264MC.SPC
[sigmove 14:38:44 DEBUG] transformed Z264Md.SPC -> Z264MD.SPC
[sigmove 14:38:44 DEBUG] transformed Z264Me.SPC -> Z264ME.SPC
[sigmove 14:38:44 DEBUG] transformed Z264Mf.SPC -> Z264MF.SPC
[Status 14:38:44 INFO] data for Z264 transferred to science data processing
[Tidy 14:38:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:38:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:38:44 INFO] resetting WatchDogTimer
[Status 14:38:45 INFO] Starting Set [AERI set: name H265, 6 scans, 60 angle, D22500 command]
[Ingest 14:38:45 INFO] Sending XML status message
[Status 14:38:45 INFO] Mirror angle: 60
[Mirror 14:38:45 INFO] rotating to position H
[Status 14:38:46 INFO] .SET file for ACQ96 ready
[Ingest 14:38:46 INFO] Starting acquisition
[Status 14:38:47 INFO] reading housekeeping
[Status 14:39:05 INFO] acquire complete
[Status 14:39:06 INFO] writing housekeeping
[Sequencer 14:39:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:39:06 INFO] incremented H scene to 265 completed views
[Sequencer 14:39:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:39:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:39:06 INFO] incremented to [AERI set: name A265, 6 scans, 120 angle, D28300 command] set
[sigmove 14:39:06 INFO] H265.SIG(18)
[sigmove 14:39:06 DEBUG] transformed H265Ma.SPC -> H265MA.SPC
[sigmove 14:39:06 DEBUG] transformed H265Mb.SPC -> H265MB.SPC
[sigmove 14:39:06 DEBUG] transformed H265Mc.SPC -> H265MC.SPC
[sigmove 14:39:06 DEBUG] transformed H265Md.SPC -> H265MD.SPC
[sigmove 14:39:06 DEBUG] transformed H265Me.SPC -> H265ME.SPC
[sigmove 14:39:06 DEBUG] transformed H265Mf.SPC -> H265MF.SPC
[Status 14:39:06 INFO] data for H265 transferred to science data processing
[Tidy 14:39:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:39:06 INFO] A263.FIN(19),H263.FIN(19),S263.FIN(19),T263.FIN(19),U263.FIN(19),V263.FIN(19),W263.FIN(19),X263.FIN(19),Y263.FIN(19),Z263.FIN(19),A264.FIN(19),H264.FIN(19),S264.FIN(19),T264.FIN(19),U264.FIN(19),V264.FIN(19),W264.FIN(19),X264.FIN(19),Y264.FIN(19),Z264.FIN(19)
[sigmove 14:39:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:39:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:39:10 DEBUG] done zipping
[WatchDog 14:39:11 INFO] resetting WatchDogTimer
[Status 14:39:11 INFO] Starting Set [AERI set: name A265, 6 scans, 120 angle, D28300 command]
[Ingest 14:39:11 INFO] Sending XML status message
[Status 14:39:11 INFO] Mirror angle: 120
[Mirror 14:39:11 INFO] rotating to position A
[Status 14:39:12 INFO] .SET file for ACQ96 ready
[Ingest 14:39:13 INFO] Starting acquisition
[Status 14:39:13 INFO] reading housekeeping
[Status 14:39:31 INFO] acquire complete
[Status 14:39:32 INFO] writing housekeeping
[Sequencer 14:39:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:39:32 INFO] incremented A scene to 265 completed views
[Sequencer 14:39:32 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:39:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:39:32 INFO] incremented to [AERI set: name S265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:39:32 INFO] A265.SIG(18)
[sigmove 14:39:32 DEBUG] transformed A265Ma.SPC -> A265MA.SPC
[sigmove 14:39:32 DEBUG] transformed A265Mb.SPC -> A265MB.SPC
[sigmove 14:39:32 DEBUG] transformed A265Mc.SPC -> A265MC.SPC
[sigmove 14:39:32 DEBUG] transformed A265Md.SPC -> A265MD.SPC
[sigmove 14:39:32 DEBUG] transformed A265Me.SPC -> A265ME.SPC
[sigmove 14:39:32 DEBUG] transformed A265Mf.SPC -> A265MF.SPC
[Status 14:39:32 INFO] data for A265 transferred to science data processing
[Tidy 14:39:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:39:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:39:32 INFO] resetting WatchDogTimer
[Status 14:39:32 INFO] Starting Set [AERI set: name S265, 6 scans, 0 angle, D16300 command]
[Ingest 14:39:32 INFO] Sending XML status message
[Status 14:39:32 INFO] Mirror angle: 0
[Mirror 14:39:32 INFO] rotating to position S
[Status 14:39:34 INFO] .SET file for ACQ96 ready
[Ingest 14:39:34 INFO] Starting acquisition
[Status 14:39:34 INFO] reading housekeeping
[Status 14:39:52 INFO] acquire complete
[Status 14:39:53 INFO] writing housekeeping
[Sequencer 14:39:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:39:53 INFO] incremented S scene to 265 completed views
[Sequencer 14:39:53 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:39:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:39:53 INFO] incremented to [AERI set: name T265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:39:53 INFO] S265.SIG(18)
[sigmove 14:39:53 DEBUG] transformed S265Ma.SPC -> S265MA.SPC
[sigmove 14:39:53 DEBUG] transformed S265Mb.SPC -> S265MB.SPC
[sigmove 14:39:53 DEBUG] transformed S265Mc.SPC -> S265MC.SPC
[sigmove 14:39:53 DEBUG] transformed S265Md.SPC -> S265MD.SPC
[sigmove 14:39:53 DEBUG] transformed S265Me.SPC -> S265ME.SPC
[sigmove 14:39:53 DEBUG] transformed S265Mf.SPC -> S265MF.SPC
[Status 14:39:53 INFO] data for S265 transferred to science data processing
[Tidy 14:39:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:39:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:39:53 INFO] resetting WatchDogTimer
[Status 14:39:53 INFO] Starting Set [AERI set: name T265, 6 scans, 0 angle, D16300 command]
[Ingest 14:39:53 INFO] Sending XML status message
[Status 14:39:53 INFO] Mirror angle: 0
[Mirror 14:39:54 INFO] rotating to position T
[Status 14:39:54 INFO] .SET file for ACQ96 ready
[Ingest 14:39:54 INFO] Starting acquisition
[Status 14:39:55 INFO] reading housekeeping
[Status 14:40:17 INFO] acquire complete
[Status 14:40:18 INFO] writing housekeeping
[Sequencer 14:40:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:40:18 INFO] incremented T scene to 265 completed views
[Sequencer 14:40:18 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:40:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:40:18 INFO] incremented to [AERI set: name U265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:40:18 INFO] T265.SIG(18)
[sigmove 14:40:18 DEBUG] transformed T265Ma.SPC -> T265MA.SPC
[sigmove 14:40:18 DEBUG] transformed T265Mb.SPC -> T265MB.SPC
[sigmove 14:40:18 DEBUG] transformed T265Mc.SPC -> T265MC.SPC
[sigmove 14:40:18 DEBUG] transformed T265Md.SPC -> T265MD.SPC
[sigmove 14:40:18 DEBUG] transformed T265Me.SPC -> T265ME.SPC
[sigmove 14:40:18 DEBUG] transformed T265Mf.SPC -> T265MF.SPC
[Status 14:40:18 INFO] data for T265 transferred to science data processing
[Tidy 14:40:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:40:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:40:18 INFO] resetting WatchDogTimer
[Status 14:40:18 INFO] Starting Set [AERI set: name U265, 6 scans, 0 angle, D16300 command]
[Ingest 14:40:18 INFO] Sending XML status message
[Status 14:40:18 INFO] Mirror angle: 0
[Mirror 14:40:18 INFO] rotating to position U
[Status 14:40:19 INFO] .SET file for ACQ96 ready
[Ingest 14:40:19 INFO] Starting acquisition
[Status 14:40:19 INFO] reading housekeeping
[Status 14:40:37 INFO] acquire complete
[Status 14:40:38 INFO] writing housekeeping
[Sequencer 14:40:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:40:38 INFO] incremented U scene to 265 completed views
[Sequencer 14:40:38 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:40:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:40:38 INFO] incremented to [AERI set: name V265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:40:38 INFO] U265.SIG(18)
[sigmove 14:40:38 DEBUG] transformed U265Ma.SPC -> U265MA.SPC
[sigmove 14:40:38 DEBUG] transformed U265Mb.SPC -> U265MB.SPC
[sigmove 14:40:38 DEBUG] transformed U265Mc.SPC -> U265MC.SPC
[sigmove 14:40:38 DEBUG] transformed U265Md.SPC -> U265MD.SPC
[sigmove 14:40:38 DEBUG] transformed U265Me.SPC -> U265ME.SPC
[sigmove 14:40:38 DEBUG] transformed U265Mf.SPC -> U265MF.SPC
[Status 14:40:38 INFO] data for U265 transferred to science data processing
[Tidy 14:40:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:40:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:40:38 INFO] resetting WatchDogTimer
[Status 14:40:38 INFO] Starting Set [AERI set: name V265, 6 scans, 0 angle, D16300 command]
[Ingest 14:40:38 INFO] Sending XML status message
[Status 14:40:38 INFO] Mirror angle: 0
[Mirror 14:40:38 INFO] rotating to position V
[Status 14:40:39 INFO] .SET file for ACQ96 ready
[Ingest 14:40:39 INFO] Starting acquisition
[Status 14:40:40 INFO] reading housekeeping
[Status 14:40:57 INFO] acquire complete
[Status 14:40:58 INFO] writing housekeeping
[Sequencer 14:40:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:40:58 INFO] incremented V scene to 265 completed views
[Sequencer 14:40:58 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:40:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:40:58 INFO] incremented to [AERI set: name W265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:40:58 INFO] V265.SIG(18)
[sigmove 14:40:58 DEBUG] transformed V265Ma.SPC -> V265MA.SPC
[sigmove 14:40:58 DEBUG] transformed V265Mb.SPC -> V265MB.SPC
[sigmove 14:40:58 DEBUG] transformed V265Mc.SPC -> V265MC.SPC
[sigmove 14:40:58 DEBUG] transformed V265Md.SPC -> V265MD.SPC
[sigmove 14:40:58 DEBUG] transformed V265Me.SPC -> V265ME.SPC
[sigmove 14:40:58 DEBUG] transformed V265Mf.SPC -> V265MF.SPC
[Status 14:40:58 INFO] data for V265 transferred to science data processing
[Tidy 14:40:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:40:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:40:58 INFO] resetting WatchDogTimer
[Status 14:40:58 INFO] Starting Set [AERI set: name W265, 6 scans, 0 angle, D16300 command]
[Ingest 14:40:58 INFO] Sending XML status message
[Status 14:40:58 INFO] Mirror angle: 0
[Mirror 14:40:59 INFO] rotating to position W
[Status 14:40:59 INFO] .SET file for ACQ96 ready
[Ingest 14:40:59 INFO] Starting acquisition
[Status 14:41:00 INFO] reading housekeeping
[Status 14:41:17 INFO] acquire complete
[Status 14:41:18 INFO] writing housekeeping
[Sequencer 14:41:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:41:18 INFO] incremented W scene to 265 completed views
[Sequencer 14:41:18 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:41:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:41:18 INFO] incremented to [AERI set: name X265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:41:18 INFO] W265.SIG(18)
[sigmove 14:41:18 DEBUG] transformed W265Ma.SPC -> W265MA.SPC
[sigmove 14:41:18 DEBUG] transformed W265Mb.SPC -> W265MB.SPC
[sigmove 14:41:18 DEBUG] transformed W265Mc.SPC -> W265MC.SPC
[sigmove 14:41:18 DEBUG] transformed W265Md.SPC -> W265MD.SPC
[sigmove 14:41:18 DEBUG] transformed W265Me.SPC -> W265ME.SPC
[sigmove 14:41:18 DEBUG] transformed W265Mf.SPC -> W265MF.SPC
[Status 14:41:18 INFO] data for W265 transferred to science data processing
[Tidy 14:41:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:41:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:41:18 INFO] resetting WatchDogTimer
[Status 14:41:18 INFO] Starting Set [AERI set: name X265, 6 scans, 0 angle, D16300 command]
[Ingest 14:41:18 INFO] Sending XML status message
[Status 14:41:19 INFO] Mirror angle: 0
[Mirror 14:41:19 INFO] rotating to position X
[Status 14:41:19 INFO] .SET file for ACQ96 ready
[Ingest 14:41:20 INFO] Starting acquisition
[Status 14:41:20 INFO] reading housekeeping
[Status 14:41:37 INFO] acquire complete
[Status 14:41:38 INFO] writing housekeeping
[Sequencer 14:41:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:41:38 INFO] incremented X scene to 265 completed views
[Sequencer 14:41:38 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:41:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:41:38 INFO] incremented to [AERI set: name Y265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:41:38 INFO] X265.SIG(18)
[sigmove 14:41:38 DEBUG] transformed X265Ma.SPC -> X265MA.SPC
[sigmove 14:41:38 DEBUG] transformed X265Mb.SPC -> X265MB.SPC
[sigmove 14:41:38 DEBUG] transformed X265Mc.SPC -> X265MC.SPC
[sigmove 14:41:38 DEBUG] transformed X265Md.SPC -> X265MD.SPC
[sigmove 14:41:38 DEBUG] transformed X265Me.SPC -> X265ME.SPC
[sigmove 14:41:38 DEBUG] transformed X265Mf.SPC -> X265MF.SPC
[Status 14:41:38 INFO] data for X265 transferred to science data processing
[Tidy 14:41:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:41:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:41:38 INFO] resetting WatchDogTimer
[Status 14:41:39 INFO] Starting Set [AERI set: name Y265, 6 scans, 0 angle, D16300 command]
[Ingest 14:41:39 INFO] Sending XML status message
[Status 14:41:39 INFO] Mirror angle: 0
[Mirror 14:41:39 INFO] rotating to position Y
[Status 14:41:40 INFO] .SET file for ACQ96 ready
[Ingest 14:41:40 INFO] Starting acquisition
[Status 14:41:40 INFO] reading housekeeping
[Status 14:41:58 INFO] acquire complete
[Status 14:41:59 INFO] writing housekeeping
[Sequencer 14:41:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:41:59 INFO] incremented Y scene to 265 completed views
[Sequencer 14:41:59 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:41:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:41:59 INFO] incremented to [AERI set: name Z265, 6 scans, 0 angle, D16300 command] set
[sigmove 14:41:59 INFO] Y265.SIG(18)
[sigmove 14:41:59 DEBUG] transformed Y265Ma.SPC -> Y265MA.SPC
[sigmove 14:41:59 DEBUG] transformed Y265Mb.SPC -> Y265MB.SPC
[sigmove 14:41:59 DEBUG] transformed Y265Mc.SPC -> Y265MC.SPC
[sigmove 14:41:59 DEBUG] transformed Y265Md.SPC -> Y265MD.SPC
[sigmove 14:41:59 DEBUG] transformed Y265Me.SPC -> Y265ME.SPC
[sigmove 14:41:59 DEBUG] transformed Y265Mf.SPC -> Y265MF.SPC
[Status 14:41:59 INFO] data for Y265 transferred to science data processing
[Tidy 14:41:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:41:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:41:59 INFO] resetting WatchDogTimer
[Status 14:41:59 INFO] Starting Set [AERI set: name Z265, 6 scans, 0 angle, D16300 command]
[Ingest 14:41:59 INFO] Sending XML status message
[Status 14:41:59 INFO] Mirror angle: 0
[Mirror 14:41:59 INFO] rotating to position Z
[Status 14:42:00 INFO] .SET file for ACQ96 ready
[Ingest 14:42:00 INFO] Starting acquisition
[Status 14:42:00 INFO] reading housekeeping
[Status 14:42:18 INFO] acquire complete
[Status 14:42:19 INFO] writing housekeeping
[Sequencer 14:42:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:42:19 INFO] incremented Z scene to 265 completed views
[Sequencer 14:42:19 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:42:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:42:19 INFO] incremented to [AERI set: name A266, 6 scans, 120 angle, D28300 command] set
[sigmove 14:42:19 INFO] Z265.SIG(18)
[sigmove 14:42:19 DEBUG] transformed Z265Ma.SPC -> Z265MA.SPC
[sigmove 14:42:19 DEBUG] transformed Z265Mb.SPC -> Z265MB.SPC
[sigmove 14:42:19 DEBUG] transformed Z265Mc.SPC -> Z265MC.SPC
[sigmove 14:42:19 DEBUG] transformed Z265Md.SPC -> Z265MD.SPC
[sigmove 14:42:19 DEBUG] transformed Z265Me.SPC -> Z265ME.SPC
[sigmove 14:42:19 DEBUG] transformed Z265Mf.SPC -> Z265MF.SPC
[Status 14:42:19 INFO] data for Z265 transferred to science data processing
[Tidy 14:42:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:42:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:42:19 INFO] resetting WatchDogTimer
[Status 14:42:19 INFO] Starting Set [AERI set: name A266, 6 scans, 120 angle, D28300 command]
[Ingest 14:42:19 INFO] Sending XML status message
[Status 14:42:19 INFO] Mirror angle: 120
[Mirror 14:42:19 INFO] rotating to position A
[Status 14:42:21 INFO] .SET file for ACQ96 ready
[Ingest 14:42:21 INFO] Starting acquisition
[Status 14:42:22 INFO] reading housekeeping
[Status 14:42:39 INFO] acquire complete
[Status 14:42:40 INFO] writing housekeeping
[Sequencer 14:42:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:42:40 INFO] incremented A scene to 266 completed views
[Sequencer 14:42:40 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:42:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:42:40 INFO] incremented to [AERI set: name H266, 6 scans, 60 angle, D22500 command] set
[sigmove 14:42:40 INFO] A266.SIG(18)
[sigmove 14:42:40 DEBUG] transformed A266Ma.SPC -> A266MA.SPC
[sigmove 14:42:40 DEBUG] transformed A266Mb.SPC -> A266MB.SPC
[sigmove 14:42:40 DEBUG] transformed A266Mc.SPC -> A266MC.SPC
[sigmove 14:42:40 DEBUG] transformed A266Md.SPC -> A266MD.SPC
[sigmove 14:42:40 DEBUG] transformed A266Me.SPC -> A266ME.SPC
[sigmove 14:42:40 DEBUG] transformed A266Mf.SPC -> A266MF.SPC
[Status 14:42:40 INFO] data for A266 transferred to science data processing
[Tidy 14:42:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:42:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:42:40 INFO] resetting WatchDogTimer
[Status 14:42:40 INFO] Starting Set [AERI set: name H266, 6 scans, 60 angle, D22500 command]
[Ingest 14:42:40 INFO] Sending XML status message
[Status 14:42:40 INFO] Mirror angle: 60
[Mirror 14:42:41 INFO] rotating to position H
[Status 14:42:42 INFO] .SET file for ACQ96 ready
[Ingest 14:42:42 INFO] Starting acquisition
[Status 14:42:42 INFO] reading housekeeping
[Status 14:43:00 INFO] acquire complete
[Status 14:43:01 INFO] writing housekeeping
[Sequencer 14:43:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:43:01 INFO] incremented H scene to 266 completed views
[Sequencer 14:43:01 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:43:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:43:01 INFO] incremented to [AERI set: name S266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:43:01 INFO] H266.SIG(18)
[sigmove 14:43:01 DEBUG] transformed H266Ma.SPC -> H266MA.SPC
[sigmove 14:43:01 DEBUG] transformed H266Mb.SPC -> H266MB.SPC
[sigmove 14:43:01 DEBUG] transformed H266Mc.SPC -> H266MC.SPC
[sigmove 14:43:01 DEBUG] transformed H266Md.SPC -> H266MD.SPC
[sigmove 14:43:01 DEBUG] transformed H266Me.SPC -> H266ME.SPC
[sigmove 14:43:01 DEBUG] transformed H266Mf.SPC -> H266MF.SPC
[Status 14:43:01 INFO] data for H266 transferred to science data processing
[Tidy 14:43:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:43:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:43:01 INFO] resetting WatchDogTimer
[Status 14:43:02 INFO] Starting Set [AERI set: name S266, 6 scans, 0 angle, D16300 command]
[Ingest 14:43:02 INFO] Sending XML status message
[Status 14:43:02 INFO] Mirror angle: 0
[Mirror 14:43:02 INFO] rotating to position S
[Status 14:43:03 INFO] .SET file for ACQ96 ready
[Ingest 14:43:03 INFO] Starting acquisition
[Status 14:43:04 INFO] reading housekeeping
[Status 14:43:22 INFO] acquire complete
[Status 14:43:23 INFO] writing housekeeping
[Sequencer 14:43:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:43:23 INFO] incremented S scene to 266 completed views
[Sequencer 14:43:23 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:43:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:43:23 INFO] incremented to [AERI set: name T266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:43:23 INFO] S266.SIG(18)
[sigmove 14:43:23 DEBUG] transformed S266Ma.SPC -> S266MA.SPC
[sigmove 14:43:23 DEBUG] transformed S266Mb.SPC -> S266MB.SPC
[sigmove 14:43:23 DEBUG] transformed S266Mc.SPC -> S266MC.SPC
[sigmove 14:43:23 DEBUG] transformed S266Md.SPC -> S266MD.SPC
[sigmove 14:43:23 DEBUG] transformed S266Me.SPC -> S266ME.SPC
[sigmove 14:43:23 DEBUG] transformed S266Mf.SPC -> S266MF.SPC
[Status 14:43:23 INFO] data for S266 transferred to science data processing
[Tidy 14:43:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:43:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:43:23 INFO] resetting WatchDogTimer
[Status 14:43:23 INFO] Starting Set [AERI set: name T266, 6 scans, 0 angle, D16300 command]
[Ingest 14:43:23 INFO] Sending XML status message
[Status 14:43:23 INFO] Mirror angle: 0
[Mirror 14:43:24 INFO] rotating to position T
[Status 14:43:24 INFO] .SET file for ACQ96 ready
[Ingest 14:43:24 INFO] Starting acquisition
[Status 14:43:25 INFO] reading housekeeping
[Status 14:43:42 INFO] acquire complete
[Status 14:43:43 INFO] writing housekeeping
[Sequencer 14:43:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:43:43 INFO] incremented T scene to 266 completed views
[Sequencer 14:43:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:43:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:43:43 INFO] incremented to [AERI set: name U266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:43:43 INFO] T266.SIG(18)
[sigmove 14:43:43 DEBUG] transformed T266Ma.SPC -> T266MA.SPC
[sigmove 14:43:43 DEBUG] transformed T266Mb.SPC -> T266MB.SPC
[sigmove 14:43:43 DEBUG] transformed T266Mc.SPC -> T266MC.SPC
[sigmove 14:43:43 DEBUG] transformed T266Md.SPC -> T266MD.SPC
[sigmove 14:43:43 DEBUG] transformed T266Me.SPC -> T266ME.SPC
[sigmove 14:43:43 DEBUG] transformed T266Mf.SPC -> T266MF.SPC
[Status 14:43:43 INFO] data for T266 transferred to science data processing
[Tidy 14:43:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:43:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:43:43 INFO] resetting WatchDogTimer
[Status 14:43:43 INFO] Starting Set [AERI set: name U266, 6 scans, 0 angle, D16300 command]
[Ingest 14:43:43 INFO] Sending XML status message
[Status 14:43:43 INFO] Mirror angle: 0
[Mirror 14:43:44 INFO] rotating to position U
[Status 14:43:44 INFO] .SET file for ACQ96 ready
[Ingest 14:43:44 INFO] Starting acquisition
[Status 14:43:45 INFO] reading housekeeping
[Status 14:44:02 INFO] acquire complete
[Status 14:44:03 INFO] writing housekeeping
[Sequencer 14:44:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:44:03 INFO] incremented U scene to 266 completed views
[Sequencer 14:44:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:44:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:44:03 INFO] incremented to [AERI set: name V266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:44:03 INFO] U266.SIG(18)
[sigmove 14:44:03 DEBUG] transformed U266Ma.SPC -> U266MA.SPC
[sigmove 14:44:03 DEBUG] transformed U266Mb.SPC -> U266MB.SPC
[sigmove 14:44:03 DEBUG] transformed U266Mc.SPC -> U266MC.SPC
[sigmove 14:44:03 DEBUG] transformed U266Md.SPC -> U266MD.SPC
[sigmove 14:44:03 DEBUG] transformed U266Me.SPC -> U266ME.SPC
[sigmove 14:44:03 DEBUG] transformed U266Mf.SPC -> U266MF.SPC
[Status 14:44:03 INFO] data for U266 transferred to science data processing
[Tidy 14:44:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:44:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:44:03 INFO] resetting WatchDogTimer
[Status 14:44:03 INFO] Starting Set [AERI set: name V266, 6 scans, 0 angle, D16300 command]
[Ingest 14:44:03 INFO] Sending XML status message
[Status 14:44:04 INFO] Mirror angle: 0
[Mirror 14:44:04 INFO] rotating to position V
[Status 14:44:04 INFO] .SET file for ACQ96 ready
[Ingest 14:44:05 INFO] Starting acquisition
[Status 14:44:05 INFO] reading housekeeping
[Status 14:44:22 INFO] acquire complete
[Status 14:44:23 INFO] writing housekeeping
[Sequencer 14:44:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:44:23 INFO] incremented V scene to 266 completed views
[Sequencer 14:44:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:44:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:44:23 INFO] incremented to [AERI set: name W266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:44:23 INFO] V266.SIG(18)
[sigmove 14:44:23 DEBUG] transformed V266Ma.SPC -> V266MA.SPC
[sigmove 14:44:23 DEBUG] transformed V266Mb.SPC -> V266MB.SPC
[sigmove 14:44:23 DEBUG] transformed V266Mc.SPC -> V266MC.SPC
[sigmove 14:44:23 DEBUG] transformed V266Md.SPC -> V266MD.SPC
[sigmove 14:44:23 DEBUG] transformed V266Me.SPC -> V266ME.SPC
[sigmove 14:44:23 DEBUG] transformed V266Mf.SPC -> V266MF.SPC
[Status 14:44:23 INFO] data for V266 transferred to science data processing
[Tidy 14:44:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:44:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:44:23 INFO] resetting WatchDogTimer
[Status 14:44:24 INFO] Starting Set [AERI set: name W266, 6 scans, 0 angle, D16300 command]
[Ingest 14:44:24 INFO] Sending XML status message
[Status 14:44:24 INFO] Mirror angle: 0
[Mirror 14:44:24 INFO] rotating to position W
[Status 14:44:24 INFO] .SET file for ACQ96 ready
[Ingest 14:44:25 INFO] Starting acquisition
[Status 14:44:25 INFO] reading housekeeping
[Status 14:44:43 INFO] acquire complete
[Status 14:44:43 INFO] writing housekeeping
[Sequencer 14:44:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:44:43 INFO] incremented W scene to 266 completed views
[Sequencer 14:44:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:44:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:44:44 INFO] incremented to [AERI set: name X266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:44:44 INFO] W266.SIG(18)
[sigmove 14:44:44 DEBUG] transformed W266Ma.SPC -> W266MA.SPC
[sigmove 14:44:44 DEBUG] transformed W266Mb.SPC -> W266MB.SPC
[sigmove 14:44:44 DEBUG] transformed W266Mc.SPC -> W266MC.SPC
[sigmove 14:44:44 DEBUG] transformed W266Md.SPC -> W266MD.SPC
[sigmove 14:44:44 DEBUG] transformed W266Me.SPC -> W266ME.SPC
[sigmove 14:44:44 DEBUG] transformed W266Mf.SPC -> W266MF.SPC
[Status 14:44:44 INFO] data for W266 transferred to science data processing
[Tidy 14:44:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:44:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:44:44 INFO] resetting WatchDogTimer
[Status 14:44:44 INFO] Starting Set [AERI set: name X266, 6 scans, 0 angle, D16300 command]
[Ingest 14:44:44 INFO] Sending XML status message
[Status 14:44:44 INFO] Mirror angle: 0
[Mirror 14:44:44 INFO] rotating to position X
[Status 14:44:45 INFO] .SET file for ACQ96 ready
[Ingest 14:44:45 INFO] Starting acquisition
[Status 14:44:45 INFO] reading housekeeping
[Status 14:45:03 INFO] acquire complete
[Status 14:45:04 INFO] writing housekeeping
[Sequencer 14:45:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:45:04 INFO] incremented X scene to 266 completed views
[Sequencer 14:45:04 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:45:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:45:04 INFO] incremented to [AERI set: name Y266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:45:04 INFO] X266.SIG(18)
[sigmove 14:45:04 DEBUG] transformed X266Ma.SPC -> X266MA.SPC
[sigmove 14:45:04 DEBUG] transformed X266Mb.SPC -> X266MB.SPC
[sigmove 14:45:04 DEBUG] transformed X266Mc.SPC -> X266MC.SPC
[sigmove 14:45:04 DEBUG] transformed X266Md.SPC -> X266MD.SPC
[sigmove 14:45:04 DEBUG] transformed X266Me.SPC -> X266ME.SPC
[sigmove 14:45:04 DEBUG] transformed X266Mf.SPC -> X266MF.SPC
[Status 14:45:04 INFO] data for X266 transferred to science data processing
[Tidy 14:45:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:45:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:45:04 INFO] resetting WatchDogTimer
[Status 14:45:04 INFO] Starting Set [AERI set: name Y266, 6 scans, 0 angle, D16300 command]
[Ingest 14:45:04 INFO] Sending XML status message
[Status 14:45:04 INFO] Mirror angle: 0
[Mirror 14:45:04 INFO] rotating to position Y
[Status 14:45:05 INFO] .SET file for ACQ96 ready
[Ingest 14:45:05 INFO] Starting acquisition
[Status 14:45:05 INFO] reading housekeeping
[Status 14:45:23 INFO] acquire complete
[Status 14:45:24 INFO] writing housekeeping
[Sequencer 14:45:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:45:24 INFO] incremented Y scene to 266 completed views
[Sequencer 14:45:24 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:45:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:45:24 INFO] incremented to [AERI set: name Z266, 6 scans, 0 angle, D16300 command] set
[sigmove 14:45:24 INFO] Y266.SIG(18)
[sigmove 14:45:24 DEBUG] transformed Y266Ma.SPC -> Y266MA.SPC
[sigmove 14:45:24 DEBUG] transformed Y266Mb.SPC -> Y266MB.SPC
[sigmove 14:45:24 DEBUG] transformed Y266Mc.SPC -> Y266MC.SPC
[sigmove 14:45:24 DEBUG] transformed Y266Md.SPC -> Y266MD.SPC
[sigmove 14:45:24 DEBUG] transformed Y266Me.SPC -> Y266ME.SPC
[sigmove 14:45:24 DEBUG] transformed Y266Mf.SPC -> Y266MF.SPC
[Status 14:45:24 INFO] data for Y266 transferred to science data processing
[Tidy 14:45:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:45:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:45:24 INFO] resetting WatchDogTimer
[Status 14:45:24 INFO] Starting Set [AERI set: name Z266, 6 scans, 0 angle, D16300 command]
[Ingest 14:45:24 INFO] Sending XML status message
[Status 14:45:24 INFO] Mirror angle: 0
[Mirror 14:45:25 INFO] rotating to position Z
[Status 14:45:25 INFO] .SET file for ACQ96 ready
[Ingest 14:45:25 INFO] Starting acquisition
[Status 14:45:26 INFO] reading housekeeping
[Status 14:45:43 INFO] acquire complete
[Status 14:45:44 INFO] writing housekeeping
[Sequencer 14:45:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:45:44 INFO] incremented Z scene to 266 completed views
[Sequencer 14:45:44 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:45:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:45:44 INFO] incremented to [AERI set: name H267, 6 scans, 60 angle, D22500 command] set
[sigmove 14:45:44 INFO] Z266.SIG(18)
[sigmove 14:45:44 DEBUG] transformed Z266Ma.SPC -> Z266MA.SPC
[sigmove 14:45:44 DEBUG] transformed Z266Mb.SPC -> Z266MB.SPC
[sigmove 14:45:44 DEBUG] transformed Z266Mc.SPC -> Z266MC.SPC
[sigmove 14:45:44 DEBUG] transformed Z266Md.SPC -> Z266MD.SPC
[sigmove 14:45:44 DEBUG] transformed Z266Me.SPC -> Z266ME.SPC
[sigmove 14:45:44 DEBUG] transformed Z266Mf.SPC -> Z266MF.SPC
[Status 14:45:44 INFO] data for Z266 transferred to science data processing
[Tidy 14:45:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:45:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:45:44 INFO] resetting WatchDogTimer
[Status 14:45:44 INFO] Starting Set [AERI set: name H267, 6 scans, 60 angle, D22500 command]
[Ingest 14:45:44 INFO] Sending XML status message
[Status 14:45:44 INFO] Mirror angle: 60
[Mirror 14:45:45 INFO] rotating to position H
[Status 14:45:46 INFO] .SET file for ACQ96 ready
[Ingest 14:45:46 INFO] Starting acquisition
[Status 14:45:46 INFO] reading housekeeping
[Status 14:46:04 INFO] acquire complete
[Status 14:46:05 INFO] writing housekeeping
[Sequencer 14:46:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:46:05 INFO] incremented H scene to 267 completed views
[Sequencer 14:46:05 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:46:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:46:05 INFO] incremented to [AERI set: name A267, 6 scans, 120 angle, D28300 command] set
[sigmove 14:46:05 INFO] H267.SIG(18)
[sigmove 14:46:05 DEBUG] transformed H267Ma.SPC -> H267MA.SPC
[sigmove 14:46:05 DEBUG] transformed H267Mb.SPC -> H267MB.SPC
[sigmove 14:46:05 DEBUG] transformed H267Mc.SPC -> H267MC.SPC
[sigmove 14:46:05 DEBUG] transformed H267Md.SPC -> H267MD.SPC
[sigmove 14:46:05 DEBUG] transformed H267Me.SPC -> H267ME.SPC
[sigmove 14:46:05 DEBUG] transformed H267Mf.SPC -> H267MF.SPC
[Status 14:46:05 INFO] data for H267 transferred to science data processing
[Tidy 14:46:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:46:05 INFO] A265.FIN(19),H265.FIN(19),S265.FIN(19),T265.FIN(19),U265.FIN(19),V265.FIN(19),W265.FIN(19),X265.FIN(19),Y265.FIN(19),Z265.FIN(19),A266.FIN(19),H266.FIN(19),S266.FIN(19),T266.FIN(19),U266.FIN(19),V266.FIN(19),W266.FIN(19),X266.FIN(19),Y266.FIN(19),Z266.FIN(19)
[sigmove 14:46:05 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:46:05 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:46:10 DEBUG] done zipping
[WatchDog 14:46:10 INFO] resetting WatchDogTimer
[Status 14:46:11 INFO] Starting Set [AERI set: name A267, 6 scans, 120 angle, D28300 command]
[Ingest 14:46:11 INFO] Sending XML status message
[Status 14:46:11 INFO] Mirror angle: 120
[Mirror 14:46:11 INFO] rotating to position A
[Status 14:46:12 INFO] .SET file for ACQ96 ready
[Ingest 14:46:12 INFO] Starting acquisition
[Status 14:46:13 INFO] reading housekeeping
[Status 14:46:30 INFO] acquire complete
[Status 14:46:31 INFO] writing housekeeping
[Sequencer 14:46:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:46:31 INFO] incremented A scene to 267 completed views
[Sequencer 14:46:31 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:46:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:46:31 INFO] incremented to [AERI set: name S267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:46:31 INFO] A267.SIG(18)
[sigmove 14:46:31 DEBUG] transformed A267Ma.SPC -> A267MA.SPC
[sigmove 14:46:31 DEBUG] transformed A267Mb.SPC -> A267MB.SPC
[sigmove 14:46:31 DEBUG] transformed A267Mc.SPC -> A267MC.SPC
[sigmove 14:46:31 DEBUG] transformed A267Md.SPC -> A267MD.SPC
[sigmove 14:46:31 DEBUG] transformed A267Me.SPC -> A267ME.SPC
[sigmove 14:46:31 DEBUG] transformed A267Mf.SPC -> A267MF.SPC
[Status 14:46:31 INFO] data for A267 transferred to science data processing
[Tidy 14:46:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:46:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:46:31 INFO] resetting WatchDogTimer
[Status 14:46:32 INFO] Starting Set [AERI set: name S267, 6 scans, 0 angle, D16300 command]
[Ingest 14:46:32 INFO] Sending XML status message
[Status 14:46:32 INFO] Mirror angle: 0
[Mirror 14:46:32 INFO] rotating to position S
[Status 14:46:33 INFO] .SET file for ACQ96 ready
[Ingest 14:46:34 INFO] Starting acquisition
[Status 14:46:34 INFO] reading housekeeping
[Status 14:46:52 INFO] acquire complete
[Status 14:46:53 INFO] writing housekeeping
[Sequencer 14:46:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:46:53 INFO] incremented S scene to 267 completed views
[Sequencer 14:46:53 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:46:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:46:53 INFO] incremented to [AERI set: name T267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:46:53 INFO] S267.SIG(18)
[sigmove 14:46:53 DEBUG] transformed S267Ma.SPC -> S267MA.SPC
[sigmove 14:46:53 DEBUG] transformed S267Mb.SPC -> S267MB.SPC
[sigmove 14:46:53 DEBUG] transformed S267Mc.SPC -> S267MC.SPC
[sigmove 14:46:53 DEBUG] transformed S267Md.SPC -> S267MD.SPC
[sigmove 14:46:53 DEBUG] transformed S267Me.SPC -> S267ME.SPC
[sigmove 14:46:53 DEBUG] transformed S267Mf.SPC -> S267MF.SPC
[Status 14:46:53 INFO] data for S267 transferred to science data processing
[Tidy 14:46:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:46:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:46:53 INFO] resetting WatchDogTimer
[Status 14:46:53 INFO] Starting Set [AERI set: name T267, 6 scans, 0 angle, D16300 command]
[Ingest 14:46:53 INFO] Sending XML status message
[Status 14:46:53 INFO] Mirror angle: 0
[Mirror 14:46:53 INFO] rotating to position T
[Status 14:46:54 INFO] .SET file for ACQ96 ready
[Ingest 14:46:54 INFO] Starting acquisition
[Status 14:46:54 INFO] reading housekeeping
[Status 14:47:12 INFO] acquire complete
[Status 14:47:13 INFO] writing housekeeping
[Sequencer 14:47:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:47:13 INFO] incremented T scene to 267 completed views
[Sequencer 14:47:13 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:47:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:47:13 INFO] incremented to [AERI set: name U267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:47:13 INFO] T267.SIG(18)
[sigmove 14:47:13 DEBUG] transformed T267Ma.SPC -> T267MA.SPC
[sigmove 14:47:13 DEBUG] transformed T267Mb.SPC -> T267MB.SPC
[sigmove 14:47:13 DEBUG] transformed T267Mc.SPC -> T267MC.SPC
[sigmove 14:47:13 DEBUG] transformed T267Md.SPC -> T267MD.SPC
[sigmove 14:47:13 DEBUG] transformed T267Me.SPC -> T267ME.SPC
[sigmove 14:47:13 DEBUG] transformed T267Mf.SPC -> T267MF.SPC
[Status 14:47:13 INFO] data for T267 transferred to science data processing
[Tidy 14:47:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:47:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:47:13 INFO] resetting WatchDogTimer
[Status 14:47:13 INFO] Starting Set [AERI set: name U267, 6 scans, 0 angle, D16300 command]
[Ingest 14:47:13 INFO] Sending XML status message
[Status 14:47:13 INFO] Mirror angle: 0
[Mirror 14:47:13 INFO] rotating to position U
[Status 14:47:14 INFO] .SET file for ACQ96 ready
[Ingest 14:47:14 INFO] Starting acquisition
[Status 14:47:15 INFO] reading housekeeping
[Status 14:47:32 INFO] acquire complete
[Status 14:47:33 INFO] writing housekeeping
[Sequencer 14:47:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:47:33 INFO] incremented U scene to 267 completed views
[Sequencer 14:47:33 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:47:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:47:33 INFO] incremented to [AERI set: name V267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:47:33 INFO] U267.SIG(18)
[sigmove 14:47:33 DEBUG] transformed U267Ma.SPC -> U267MA.SPC
[sigmove 14:47:33 DEBUG] transformed U267Mb.SPC -> U267MB.SPC
[sigmove 14:47:33 DEBUG] transformed U267Mc.SPC -> U267MC.SPC
[sigmove 14:47:33 DEBUG] transformed U267Md.SPC -> U267MD.SPC
[sigmove 14:47:33 DEBUG] transformed U267Me.SPC -> U267ME.SPC
[sigmove 14:47:33 DEBUG] transformed U267Mf.SPC -> U267MF.SPC
[Status 14:47:33 INFO] data for U267 transferred to science data processing
[Tidy 14:47:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:47:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:47:33 INFO] resetting WatchDogTimer
[Status 14:47:33 INFO] Starting Set [AERI set: name V267, 6 scans, 0 angle, D16300 command]
[Ingest 14:47:33 INFO] Sending XML status message
[Status 14:47:33 INFO] Mirror angle: 0
[Mirror 14:47:34 INFO] rotating to position V
[Status 14:47:34 INFO] .SET file for ACQ96 ready
[Ingest 14:47:34 INFO] Starting acquisition
[Status 14:47:35 INFO] reading housekeeping
[Status 14:47:52 INFO] acquire complete
[Status 14:47:53 INFO] writing housekeeping
[Sequencer 14:47:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:47:53 INFO] incremented V scene to 267 completed views
[Sequencer 14:47:53 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:47:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:47:53 INFO] incremented to [AERI set: name W267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:47:53 INFO] V267.SIG(18)
[sigmove 14:47:53 DEBUG] transformed V267Ma.SPC -> V267MA.SPC
[sigmove 14:47:53 DEBUG] transformed V267Mb.SPC -> V267MB.SPC
[sigmove 14:47:53 DEBUG] transformed V267Mc.SPC -> V267MC.SPC
[sigmove 14:47:53 DEBUG] transformed V267Md.SPC -> V267MD.SPC
[sigmove 14:47:53 DEBUG] transformed V267Me.SPC -> V267ME.SPC
[sigmove 14:47:53 DEBUG] transformed V267Mf.SPC -> V267MF.SPC
[Status 14:47:53 INFO] data for V267 transferred to science data processing
[Tidy 14:47:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:47:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:47:53 INFO] resetting WatchDogTimer
[Status 14:47:53 INFO] Starting Set [AERI set: name W267, 6 scans, 0 angle, D16300 command]
[Ingest 14:47:53 INFO] Sending XML status message
[Status 14:47:53 INFO] Mirror angle: 0
[Mirror 14:47:54 INFO] rotating to position W
[Status 14:47:54 INFO] .SET file for ACQ96 ready
[Ingest 14:47:55 INFO] Starting acquisition
[Status 14:47:55 INFO] reading housekeeping
[Status 14:48:12 INFO] acquire complete
[Status 14:48:13 INFO] writing housekeeping
[Sequencer 14:48:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:48:13 INFO] incremented W scene to 267 completed views
[Sequencer 14:48:13 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:48:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:48:13 INFO] incremented to [AERI set: name X267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:48:13 INFO] W267.SIG(18)
[sigmove 14:48:13 DEBUG] transformed W267Ma.SPC -> W267MA.SPC
[sigmove 14:48:13 DEBUG] transformed W267Mb.SPC -> W267MB.SPC
[sigmove 14:48:13 DEBUG] transformed W267Mc.SPC -> W267MC.SPC
[sigmove 14:48:13 DEBUG] transformed W267Md.SPC -> W267MD.SPC
[sigmove 14:48:13 DEBUG] transformed W267Me.SPC -> W267ME.SPC
[sigmove 14:48:13 DEBUG] transformed W267Mf.SPC -> W267MF.SPC
[Status 14:48:13 INFO] data for W267 transferred to science data processing
[Tidy 14:48:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:48:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:48:13 INFO] resetting WatchDogTimer
[Status 14:48:14 INFO] Starting Set [AERI set: name X267, 6 scans, 0 angle, D16300 command]
[Ingest 14:48:14 INFO] Sending XML status message
[Status 14:48:14 INFO] Mirror angle: 0
[Mirror 14:48:14 INFO] rotating to position X
[Status 14:48:14 INFO] .SET file for ACQ96 ready
[Ingest 14:48:15 INFO] Starting acquisition
[Status 14:48:15 INFO] reading housekeeping
[Status 14:48:33 INFO] acquire complete
[Status 14:48:33 INFO] writing housekeeping
[Sequencer 14:48:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:48:33 INFO] incremented X scene to 267 completed views
[Sequencer 14:48:33 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:48:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:48:33 INFO] incremented to [AERI set: name Y267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:48:33 INFO] X267.SIG(18)
[sigmove 14:48:33 DEBUG] transformed X267Ma.SPC -> X267MA.SPC
[sigmove 14:48:33 DEBUG] transformed X267Mb.SPC -> X267MB.SPC
[sigmove 14:48:33 DEBUG] transformed X267Mc.SPC -> X267MC.SPC
[sigmove 14:48:33 DEBUG] transformed X267Md.SPC -> X267MD.SPC
[sigmove 14:48:33 DEBUG] transformed X267Me.SPC -> X267ME.SPC
[sigmove 14:48:33 DEBUG] transformed X267Mf.SPC -> X267MF.SPC
[Status 14:48:33 INFO] data for X267 transferred to science data processing
[Tidy 14:48:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:48:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:48:33 INFO] resetting WatchDogTimer
[Status 14:48:34 INFO] Starting Set [AERI set: name Y267, 6 scans, 0 angle, D16300 command]
[Ingest 14:48:34 INFO] Sending XML status message
[Status 14:48:34 INFO] Mirror angle: 0
[Mirror 14:48:34 INFO] rotating to position Y
[Status 14:48:35 INFO] .SET file for ACQ96 ready
[Ingest 14:48:35 INFO] Starting acquisition
[Status 14:48:35 INFO] reading housekeeping
[Status 14:48:53 INFO] acquire complete
[Status 14:48:54 INFO] writing housekeeping
[Sequencer 14:48:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:48:54 INFO] incremented Y scene to 267 completed views
[Sequencer 14:48:54 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:48:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:48:54 INFO] incremented to [AERI set: name Z267, 6 scans, 0 angle, D16300 command] set
[sigmove 14:48:54 INFO] Y267.SIG(18)
[sigmove 14:48:54 DEBUG] transformed Y267Ma.SPC -> Y267MA.SPC
[sigmove 14:48:54 DEBUG] transformed Y267Mb.SPC -> Y267MB.SPC
[sigmove 14:48:54 DEBUG] transformed Y267Mc.SPC -> Y267MC.SPC
[sigmove 14:48:54 DEBUG] transformed Y267Md.SPC -> Y267MD.SPC
[sigmove 14:48:54 DEBUG] transformed Y267Me.SPC -> Y267ME.SPC
[sigmove 14:48:54 DEBUG] transformed Y267Mf.SPC -> Y267MF.SPC
[Status 14:48:54 INFO] data for Y267 transferred to science data processing
[Tidy 14:48:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:48:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:48:54 INFO] resetting WatchDogTimer
[Status 14:48:54 INFO] Starting Set [AERI set: name Z267, 6 scans, 0 angle, D16300 command]
[Ingest 14:48:54 INFO] Sending XML status message
[Status 14:48:54 INFO] Mirror angle: 0
[Mirror 14:48:54 INFO] rotating to position Z
[Status 14:48:55 INFO] .SET file for ACQ96 ready
[Ingest 14:48:55 INFO] Starting acquisition
[Status 14:48:55 INFO] reading housekeeping
[Status 14:49:13 INFO] acquire complete
[Status 14:49:14 INFO] writing housekeeping
[Sequencer 14:49:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:49:14 INFO] incremented Z scene to 267 completed views
[Sequencer 14:49:14 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:49:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:49:14 INFO] incremented to [AERI set: name A268, 6 scans, 120 angle, D28300 command] set
[sigmove 14:49:14 INFO] Z267.SIG(18)
[sigmove 14:49:14 DEBUG] transformed Z267Ma.SPC -> Z267MA.SPC
[sigmove 14:49:14 DEBUG] transformed Z267Mb.SPC -> Z267MB.SPC
[sigmove 14:49:14 DEBUG] transformed Z267Mc.SPC -> Z267MC.SPC
[sigmove 14:49:14 DEBUG] transformed Z267Md.SPC -> Z267MD.SPC
[sigmove 14:49:14 DEBUG] transformed Z267Me.SPC -> Z267ME.SPC
[sigmove 14:49:14 DEBUG] transformed Z267Mf.SPC -> Z267MF.SPC
[Status 14:49:14 INFO] data for Z267 transferred to science data processing
[Tidy 14:49:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:49:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:49:14 INFO] resetting WatchDogTimer
[Status 14:49:14 INFO] Starting Set [AERI set: name A268, 6 scans, 120 angle, D28300 command]
[Ingest 14:49:14 INFO] Sending XML status message
[Status 14:49:14 INFO] Mirror angle: 120
[Mirror 14:49:15 INFO] rotating to position A
[Status 14:49:16 INFO] .SET file for ACQ96 ready
[Ingest 14:49:16 INFO] Starting acquisition
[Status 14:49:17 INFO] reading housekeeping
[Status 14:49:34 INFO] acquire complete
[Status 14:49:35 INFO] writing housekeeping
[Sequencer 14:49:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:49:35 INFO] incremented A scene to 268 completed views
[Sequencer 14:49:35 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:49:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:49:35 INFO] incremented to [AERI set: name H268, 6 scans, 60 angle, D22500 command] set
[sigmove 14:49:35 INFO] A268.SIG(18)
[sigmove 14:49:35 DEBUG] transformed A268Ma.SPC -> A268MA.SPC
[sigmove 14:49:35 DEBUG] transformed A268Mb.SPC -> A268MB.SPC
[sigmove 14:49:35 DEBUG] transformed A268Mc.SPC -> A268MC.SPC
[sigmove 14:49:35 DEBUG] transformed A268Md.SPC -> A268MD.SPC
[sigmove 14:49:35 DEBUG] transformed A268Me.SPC -> A268ME.SPC
[sigmove 14:49:35 DEBUG] transformed A268Mf.SPC -> A268MF.SPC
[Status 14:49:35 INFO] data for A268 transferred to science data processing
[Tidy 14:49:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:49:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:49:35 INFO] resetting WatchDogTimer
[Status 14:49:36 INFO] Starting Set [AERI set: name H268, 6 scans, 60 angle, D22500 command]
[Ingest 14:49:36 INFO] Sending XML status message
[Status 14:49:36 INFO] Mirror angle: 60
[Mirror 14:49:36 INFO] rotating to position H
[Status 14:49:37 INFO] .SET file for ACQ96 ready
[Ingest 14:49:37 INFO] Starting acquisition
[Status 14:49:37 INFO] reading housekeeping
[Status 14:49:56 INFO] acquire complete
[Status 14:49:56 INFO] writing housekeeping
[Sequencer 14:49:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:49:56 INFO] incremented H scene to 268 completed views
[Sequencer 14:49:56 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:49:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:49:56 INFO] incremented to [AERI set: name S268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:49:56 INFO] H268.SIG(18)
[sigmove 14:49:56 DEBUG] transformed H268Ma.SPC -> H268MA.SPC
[sigmove 14:49:56 DEBUG] transformed H268Mb.SPC -> H268MB.SPC
[sigmove 14:49:56 DEBUG] transformed H268Mc.SPC -> H268MC.SPC
[sigmove 14:49:56 DEBUG] transformed H268Md.SPC -> H268MD.SPC
[sigmove 14:49:56 DEBUG] transformed H268Me.SPC -> H268ME.SPC
[sigmove 14:49:56 DEBUG] transformed H268Mf.SPC -> H268MF.SPC
[Status 14:49:56 INFO] data for H268 transferred to science data processing
[Tidy 14:49:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:49:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:49:56 INFO] resetting WatchDogTimer
[Status 14:49:57 INFO] Starting Set [AERI set: name S268, 6 scans, 0 angle, D16300 command]
[Ingest 14:49:57 INFO] Sending XML status message
[Status 14:49:57 INFO] Mirror angle: 0
[Mirror 14:49:57 INFO] rotating to position S
[Status 14:49:58 INFO] .SET file for ACQ96 ready
[Ingest 14:49:58 INFO] Starting acquisition
[Status 14:49:59 INFO] reading housekeeping
[Status 14:50:17 INFO] acquire complete
[Status 14:50:18 INFO] writing housekeeping
[Sequencer 14:50:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:50:18 INFO] incremented S scene to 268 completed views
[Sequencer 14:50:18 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:50:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:50:18 INFO] incremented to [AERI set: name T268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:50:18 INFO] S268.SIG(18)
[sigmove 14:50:18 DEBUG] transformed S268Ma.SPC -> S268MA.SPC
[sigmove 14:50:18 DEBUG] transformed S268Mb.SPC -> S268MB.SPC
[sigmove 14:50:18 DEBUG] transformed S268Mc.SPC -> S268MC.SPC
[sigmove 14:50:18 DEBUG] transformed S268Md.SPC -> S268MD.SPC
[sigmove 14:50:18 DEBUG] transformed S268Me.SPC -> S268ME.SPC
[sigmove 14:50:18 DEBUG] transformed S268Mf.SPC -> S268MF.SPC
[Status 14:50:18 INFO] data for S268 transferred to science data processing
[Tidy 14:50:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:50:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:50:18 INFO] resetting WatchDogTimer
[Status 14:50:18 INFO] Starting Set [AERI set: name T268, 6 scans, 0 angle, D16300 command]
[Ingest 14:50:18 INFO] Sending XML status message
[Status 14:50:18 INFO] Mirror angle: 0
[Mirror 14:50:18 INFO] rotating to position T
[Status 14:50:19 INFO] .SET file for ACQ96 ready
[Ingest 14:50:19 INFO] Starting acquisition
[Status 14:50:20 INFO] reading housekeeping
[Status 14:50:37 INFO] acquire complete
[Status 14:50:38 INFO] writing housekeeping
[Sequencer 14:50:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:50:38 INFO] incremented T scene to 268 completed views
[Sequencer 14:50:38 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:50:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:50:38 INFO] incremented to [AERI set: name U268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:50:38 INFO] T268.SIG(18)
[sigmove 14:50:38 DEBUG] transformed T268Ma.SPC -> T268MA.SPC
[sigmove 14:50:38 DEBUG] transformed T268Mb.SPC -> T268MB.SPC
[sigmove 14:50:38 DEBUG] transformed T268Mc.SPC -> T268MC.SPC
[sigmove 14:50:38 DEBUG] transformed T268Md.SPC -> T268MD.SPC
[sigmove 14:50:38 DEBUG] transformed T268Me.SPC -> T268ME.SPC
[sigmove 14:50:38 DEBUG] transformed T268Mf.SPC -> T268MF.SPC
[Status 14:50:38 INFO] data for T268 transferred to science data processing
[Tidy 14:50:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:50:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:50:38 INFO] resetting WatchDogTimer
[Status 14:50:38 INFO] Starting Set [AERI set: name U268, 6 scans, 0 angle, D16300 command]
[Ingest 14:50:38 INFO] Sending XML status message
[Status 14:50:38 INFO] Mirror angle: 0
[Mirror 14:50:39 INFO] rotating to position U
[Status 14:50:39 INFO] .SET file for ACQ96 ready
[Ingest 14:50:39 INFO] Starting acquisition
[Status 14:50:40 INFO] reading housekeeping
[Status 14:50:57 INFO] acquire complete
[Status 14:50:58 INFO] writing housekeeping
[Sequencer 14:50:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:50:58 INFO] incremented U scene to 268 completed views
[Sequencer 14:50:58 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:50:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:50:58 INFO] incremented to [AERI set: name V268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:50:58 INFO] U268.SIG(18)
[sigmove 14:50:58 DEBUG] transformed U268Ma.SPC -> U268MA.SPC
[sigmove 14:50:58 DEBUG] transformed U268Mb.SPC -> U268MB.SPC
[sigmove 14:50:58 DEBUG] transformed U268Mc.SPC -> U268MC.SPC
[sigmove 14:50:58 DEBUG] transformed U268Md.SPC -> U268MD.SPC
[sigmove 14:50:58 DEBUG] transformed U268Me.SPC -> U268ME.SPC
[sigmove 14:50:58 DEBUG] transformed U268Mf.SPC -> U268MF.SPC
[Status 14:50:58 INFO] data for U268 transferred to science data processing
[Tidy 14:50:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:50:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:50:58 INFO] resetting WatchDogTimer
[Status 14:50:59 INFO] Starting Set [AERI set: name V268, 6 scans, 0 angle, D16300 command]
[Ingest 14:50:59 INFO] Sending XML status message
[Status 14:50:59 INFO] Mirror angle: 0
[Mirror 14:50:59 INFO] rotating to position V
[Status 14:50:59 INFO] .SET file for ACQ96 ready
[Ingest 14:51:00 INFO] Starting acquisition
[Status 14:51:00 INFO] reading housekeeping
[Status 14:51:17 INFO] acquire complete
[Status 14:51:18 INFO] writing housekeeping
[Sequencer 14:51:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:51:18 INFO] incremented V scene to 268 completed views
[Sequencer 14:51:18 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:51:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:51:18 INFO] incremented to [AERI set: name W268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:51:18 INFO] V268.SIG(18)
[sigmove 14:51:18 DEBUG] transformed V268Ma.SPC -> V268MA.SPC
[sigmove 14:51:18 DEBUG] transformed V268Mb.SPC -> V268MB.SPC
[sigmove 14:51:18 DEBUG] transformed V268Mc.SPC -> V268MC.SPC
[sigmove 14:51:18 DEBUG] transformed V268Md.SPC -> V268MD.SPC
[sigmove 14:51:18 DEBUG] transformed V268Me.SPC -> V268ME.SPC
[sigmove 14:51:18 DEBUG] transformed V268Mf.SPC -> V268MF.SPC
[Status 14:51:18 INFO] data for V268 transferred to science data processing
[Tidy 14:51:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:51:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:51:18 INFO] resetting WatchDogTimer
[Status 14:51:19 INFO] Starting Set [AERI set: name W268, 6 scans, 0 angle, D16300 command]
[Ingest 14:51:19 INFO] Sending XML status message
[Status 14:51:19 INFO] Mirror angle: 0
[Mirror 14:51:19 INFO] rotating to position W
[Status 14:51:20 INFO] .SET file for ACQ96 ready
[Ingest 14:51:20 INFO] Starting acquisition
[Status 14:51:20 INFO] reading housekeeping
[Status 14:51:38 INFO] acquire complete
[Status 14:51:39 INFO] writing housekeeping
[Sequencer 14:51:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:51:39 INFO] incremented W scene to 268 completed views
[Sequencer 14:51:39 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:51:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:51:39 INFO] incremented to [AERI set: name X268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:51:39 INFO] W268.SIG(18)
[sigmove 14:51:39 DEBUG] transformed W268Ma.SPC -> W268MA.SPC
[sigmove 14:51:39 DEBUG] transformed W268Mb.SPC -> W268MB.SPC
[sigmove 14:51:39 DEBUG] transformed W268Mc.SPC -> W268MC.SPC
[sigmove 14:51:39 DEBUG] transformed W268Md.SPC -> W268MD.SPC
[sigmove 14:51:39 DEBUG] transformed W268Me.SPC -> W268ME.SPC
[sigmove 14:51:39 DEBUG] transformed W268Mf.SPC -> W268MF.SPC
[Status 14:51:39 INFO] data for W268 transferred to science data processing
[Tidy 14:51:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:51:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:51:39 INFO] resetting WatchDogTimer
[Status 14:51:39 INFO] Starting Set [AERI set: name X268, 6 scans, 0 angle, D16300 command]
[Ingest 14:51:39 INFO] Sending XML status message
[Status 14:51:39 INFO] Mirror angle: 0
[Mirror 14:51:39 INFO] rotating to position X
[Status 14:51:40 INFO] .SET file for ACQ96 ready
[Ingest 14:51:40 INFO] Starting acquisition
[Status 14:51:40 INFO] reading housekeeping
[Status 14:51:58 INFO] acquire complete
[Status 14:51:59 INFO] writing housekeeping
[Sequencer 14:51:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:51:59 INFO] incremented X scene to 268 completed views
[Sequencer 14:51:59 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:51:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:51:59 INFO] incremented to [AERI set: name Y268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:51:59 INFO] X268.SIG(18)
[sigmove 14:51:59 DEBUG] transformed X268Ma.SPC -> X268MA.SPC
[sigmove 14:51:59 DEBUG] transformed X268Mb.SPC -> X268MB.SPC
[sigmove 14:51:59 DEBUG] transformed X268Mc.SPC -> X268MC.SPC
[sigmove 14:51:59 DEBUG] transformed X268Md.SPC -> X268MD.SPC
[sigmove 14:51:59 DEBUG] transformed X268Me.SPC -> X268ME.SPC
[sigmove 14:51:59 DEBUG] transformed X268Mf.SPC -> X268MF.SPC
[Status 14:51:59 INFO] data for X268 transferred to science data processing
[Tidy 14:51:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:51:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:51:59 INFO] resetting WatchDogTimer
[Status 14:51:59 INFO] Starting Set [AERI set: name Y268, 6 scans, 0 angle, D16300 command]
[Ingest 14:51:59 INFO] Sending XML status message
[Status 14:51:59 INFO] Mirror angle: 0
[Mirror 14:52:00 INFO] rotating to position Y
[Status 14:52:00 INFO] .SET file for ACQ96 ready
[Ingest 14:52:00 INFO] Starting acquisition
[Status 14:52:01 INFO] reading housekeeping
[Status 14:52:18 INFO] acquire complete
[Status 14:52:19 INFO] writing housekeeping
[Sequencer 14:52:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:52:19 INFO] incremented Y scene to 268 completed views
[Sequencer 14:52:19 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:52:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:52:19 INFO] incremented to [AERI set: name Z268, 6 scans, 0 angle, D16300 command] set
[sigmove 14:52:19 INFO] Y268.SIG(18)
[sigmove 14:52:19 DEBUG] transformed Y268Ma.SPC -> Y268MA.SPC
[sigmove 14:52:19 DEBUG] transformed Y268Mb.SPC -> Y268MB.SPC
[sigmove 14:52:19 DEBUG] transformed Y268Mc.SPC -> Y268MC.SPC
[sigmove 14:52:19 DEBUG] transformed Y268Md.SPC -> Y268MD.SPC
[sigmove 14:52:19 DEBUG] transformed Y268Me.SPC -> Y268ME.SPC
[sigmove 14:52:19 DEBUG] transformed Y268Mf.SPC -> Y268MF.SPC
[Status 14:52:19 INFO] data for Y268 transferred to science data processing
[Tidy 14:52:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:52:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:52:19 INFO] resetting WatchDogTimer
[Status 14:52:19 INFO] Starting Set [AERI set: name Z268, 6 scans, 0 angle, D16300 command]
[Ingest 14:52:19 INFO] Sending XML status message
[Status 14:52:19 INFO] Mirror angle: 0
[Mirror 14:52:20 INFO] rotating to position Z
[Status 14:52:20 INFO] .SET file for ACQ96 ready
[Ingest 14:52:20 INFO] Starting acquisition
[Status 14:52:21 INFO] reading housekeeping
[Status 14:52:38 INFO] acquire complete
[Status 14:52:39 INFO] writing housekeeping
[Sequencer 14:52:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:52:39 INFO] incremented Z scene to 268 completed views
[Sequencer 14:52:39 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:52:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:52:39 INFO] incremented to [AERI set: name H269, 6 scans, 60 angle, D22500 command] set
[sigmove 14:52:39 INFO] Z268.SIG(18)
[sigmove 14:52:39 DEBUG] transformed Z268Ma.SPC -> Z268MA.SPC
[sigmove 14:52:39 DEBUG] transformed Z268Mb.SPC -> Z268MB.SPC
[sigmove 14:52:39 DEBUG] transformed Z268Mc.SPC -> Z268MC.SPC
[sigmove 14:52:39 DEBUG] transformed Z268Md.SPC -> Z268MD.SPC
[sigmove 14:52:39 DEBUG] transformed Z268Me.SPC -> Z268ME.SPC
[sigmove 14:52:39 DEBUG] transformed Z268Mf.SPC -> Z268MF.SPC
[Status 14:52:39 INFO] data for Z268 transferred to science data processing
[Tidy 14:52:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:52:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:52:39 INFO] resetting WatchDogTimer
[Status 14:52:40 INFO] Starting Set [AERI set: name H269, 6 scans, 60 angle, D22500 command]
[Ingest 14:52:40 INFO] Sending XML status message
[Status 14:52:40 INFO] Mirror angle: 60
[Mirror 14:52:40 INFO] rotating to position H
[Status 14:52:41 INFO] .SET file for ACQ96 ready
[Ingest 14:52:41 INFO] Starting acquisition
[Status 14:52:41 INFO] reading housekeeping
[Status 14:53:00 INFO] acquire complete
[Status 14:53:00 INFO] writing housekeeping
[Sequencer 14:53:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:53:00 INFO] incremented H scene to 269 completed views
[Sequencer 14:53:00 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:53:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:53:00 INFO] incremented to [AERI set: name A269, 6 scans, 120 angle, D28300 command] set
[sigmove 14:53:00 INFO] H269.SIG(18)
[sigmove 14:53:01 DEBUG] transformed H269Ma.SPC -> H269MA.SPC
[sigmove 14:53:01 DEBUG] transformed H269Mb.SPC -> H269MB.SPC
[sigmove 14:53:01 DEBUG] transformed H269Mc.SPC -> H269MC.SPC
[sigmove 14:53:01 DEBUG] transformed H269Md.SPC -> H269MD.SPC
[sigmove 14:53:01 DEBUG] transformed H269Me.SPC -> H269ME.SPC
[sigmove 14:53:01 DEBUG] transformed H269Mf.SPC -> H269MF.SPC
[Status 14:53:01 INFO] data for H269 transferred to science data processing
[Tidy 14:53:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:53:01 INFO] A267.FIN(19),H267.FIN(19),S267.FIN(19),T267.FIN(19),U267.FIN(19),V267.FIN(19),W267.FIN(19),X267.FIN(19),Y267.FIN(19),Z267.FIN(19),A268.FIN(19),H268.FIN(19),S268.FIN(19),T268.FIN(19),U268.FIN(19),V268.FIN(19),W268.FIN(19),X268.FIN(19),Y268.FIN(19),Z268.FIN(19)
[sigmove 14:53:01 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:53:01 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:53:05 DEBUG] done zipping
[WatchDog 14:53:06 INFO] resetting WatchDogTimer
[Status 14:53:06 INFO] Starting Set [AERI set: name A269, 6 scans, 120 angle, D28300 command]
[Ingest 14:53:06 INFO] Sending XML status message
[Status 14:53:06 INFO] Mirror angle: 120
[Mirror 14:53:06 INFO] rotating to position A
[Status 14:53:07 INFO] .SET file for ACQ96 ready
[Ingest 14:53:08 INFO] Starting acquisition
[Status 14:53:08 INFO] reading housekeeping
[Status 14:53:25 INFO] acquire complete
[Status 14:53:26 INFO] writing housekeeping
[Sequencer 14:53:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:53:26 INFO] incremented A scene to 269 completed views
[Sequencer 14:53:26 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:53:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:53:26 INFO] incremented to [AERI set: name S269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:53:26 INFO] A269.SIG(18)
[sigmove 14:53:26 DEBUG] transformed A269Ma.SPC -> A269MA.SPC
[sigmove 14:53:26 DEBUG] transformed A269Mb.SPC -> A269MB.SPC
[sigmove 14:53:26 DEBUG] transformed A269Mc.SPC -> A269MC.SPC
[sigmove 14:53:26 DEBUG] transformed A269Md.SPC -> A269MD.SPC
[sigmove 14:53:26 DEBUG] transformed A269Me.SPC -> A269ME.SPC
[sigmove 14:53:26 DEBUG] transformed A269Mf.SPC -> A269MF.SPC
[Status 14:53:26 INFO] data for A269 transferred to science data processing
[Tidy 14:53:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:53:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:53:26 INFO] resetting WatchDogTimer
[Status 14:53:27 INFO] Starting Set [AERI set: name S269, 6 scans, 0 angle, D16300 command]
[Ingest 14:53:27 INFO] Sending XML status message
[Status 14:53:27 INFO] Mirror angle: 0
[Mirror 14:53:27 INFO] rotating to position S
[Status 14:53:28 INFO] .SET file for ACQ96 ready
[Ingest 14:53:29 INFO] Starting acquisition
[Status 14:53:29 INFO] reading housekeeping
[Status 14:53:47 INFO] acquire complete
[Status 14:53:48 INFO] writing housekeeping
[Sequencer 14:53:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:53:48 INFO] incremented S scene to 269 completed views
[Sequencer 14:53:48 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:53:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:53:48 INFO] incremented to [AERI set: name T269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:53:48 INFO] S269.SIG(18)
[sigmove 14:53:48 DEBUG] transformed S269Ma.SPC -> S269MA.SPC
[sigmove 14:53:48 DEBUG] transformed S269Mb.SPC -> S269MB.SPC
[sigmove 14:53:48 DEBUG] transformed S269Mc.SPC -> S269MC.SPC
[sigmove 14:53:48 DEBUG] transformed S269Md.SPC -> S269MD.SPC
[sigmove 14:53:48 DEBUG] transformed S269Me.SPC -> S269ME.SPC
[sigmove 14:53:48 DEBUG] transformed S269Mf.SPC -> S269MF.SPC
[Status 14:53:48 INFO] data for S269 transferred to science data processing
[Tidy 14:53:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:53:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:53:48 INFO] resetting WatchDogTimer
[Status 14:53:48 INFO] Starting Set [AERI set: name T269, 6 scans, 0 angle, D16300 command]
[Ingest 14:53:48 INFO] Sending XML status message
[Status 14:53:48 INFO] Mirror angle: 0
[Mirror 14:53:48 INFO] rotating to position T
[Status 14:53:49 INFO] .SET file for ACQ96 ready
[Ingest 14:53:49 INFO] Starting acquisition
[Status 14:53:49 INFO] reading housekeeping
[Status 14:54:07 INFO] acquire complete
[Status 14:54:08 INFO] writing housekeeping
[Sequencer 14:54:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:54:08 INFO] incremented T scene to 269 completed views
[Sequencer 14:54:08 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:54:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:54:08 INFO] incremented to [AERI set: name U269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:54:08 INFO] T269.SIG(18)
[sigmove 14:54:08 DEBUG] transformed T269Ma.SPC -> T269MA.SPC
[sigmove 14:54:08 DEBUG] transformed T269Mb.SPC -> T269MB.SPC
[sigmove 14:54:08 DEBUG] transformed T269Mc.SPC -> T269MC.SPC
[sigmove 14:54:08 DEBUG] transformed T269Md.SPC -> T269MD.SPC
[sigmove 14:54:08 DEBUG] transformed T269Me.SPC -> T269ME.SPC
[sigmove 14:54:08 DEBUG] transformed T269Mf.SPC -> T269MF.SPC
[Status 14:54:08 INFO] data for T269 transferred to science data processing
[Tidy 14:54:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:54:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:54:08 INFO] resetting WatchDogTimer
[Status 14:54:08 INFO] Starting Set [AERI set: name U269, 6 scans, 0 angle, D16300 command]
[Ingest 14:54:08 INFO] Sending XML status message
[Status 14:54:08 INFO] Mirror angle: 0
[Mirror 14:54:08 INFO] rotating to position U
[Status 14:54:09 INFO] .SET file for ACQ96 ready
[Ingest 14:54:09 INFO] Starting acquisition
[Status 14:54:10 INFO] reading housekeeping
[Status 14:54:27 INFO] acquire complete
[Status 14:54:29 INFO] writing housekeeping
[Sequencer 14:54:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:54:29 INFO] incremented U scene to 269 completed views
[Sequencer 14:54:29 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:54:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:54:29 INFO] incremented to [AERI set: name V269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:54:29 INFO] U269.SIG(18)
[sigmove 14:54:29 DEBUG] transformed U269Ma.SPC -> U269MA.SPC
[sigmove 14:54:29 DEBUG] transformed U269Mb.SPC -> U269MB.SPC
[sigmove 14:54:29 DEBUG] transformed U269Mc.SPC -> U269MC.SPC
[sigmove 14:54:29 DEBUG] transformed U269Md.SPC -> U269MD.SPC
[sigmove 14:54:29 DEBUG] transformed U269Me.SPC -> U269ME.SPC
[sigmove 14:54:29 DEBUG] transformed U269Mf.SPC -> U269MF.SPC
[Status 14:54:29 INFO] data for U269 transferred to science data processing
[Tidy 14:54:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:54:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:54:29 INFO] resetting WatchDogTimer
[Status 14:54:29 INFO] Starting Set [AERI set: name V269, 6 scans, 0 angle, D16300 command]
[Ingest 14:54:29 INFO] Sending XML status message
[Status 14:54:29 INFO] Mirror angle: 0
[Mirror 14:54:29 INFO] rotating to position V
[Status 14:54:30 INFO] .SET file for ACQ96 ready
[Ingest 14:54:30 INFO] Starting acquisition
[Status 14:54:30 INFO] reading housekeeping
[Status 14:54:48 INFO] acquire complete
[Status 14:54:49 INFO] writing housekeeping
[Sequencer 14:54:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:54:49 INFO] incremented V scene to 269 completed views
[Sequencer 14:54:49 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:54:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:54:49 INFO] incremented to [AERI set: name W269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:54:49 INFO] V269.SIG(18)
[sigmove 14:54:49 DEBUG] transformed V269Ma.SPC -> V269MA.SPC
[sigmove 14:54:49 DEBUG] transformed V269Mb.SPC -> V269MB.SPC
[sigmove 14:54:49 DEBUG] transformed V269Mc.SPC -> V269MC.SPC
[sigmove 14:54:49 DEBUG] transformed V269Md.SPC -> V269MD.SPC
[sigmove 14:54:49 DEBUG] transformed V269Me.SPC -> V269ME.SPC
[sigmove 14:54:49 DEBUG] transformed V269Mf.SPC -> V269MF.SPC
[Status 14:54:49 INFO] data for V269 transferred to science data processing
[Tidy 14:54:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:54:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:54:49 INFO] resetting WatchDogTimer
[Status 14:54:50 INFO] Starting Set [AERI set: name W269, 6 scans, 0 angle, D16300 command]
[Ingest 14:54:50 INFO] Sending XML status message
[Status 14:54:50 INFO] Mirror angle: 0
[Mirror 14:54:50 INFO] rotating to position W
[Status 14:54:50 INFO] .SET file for ACQ96 ready
[Ingest 14:54:51 INFO] Starting acquisition
[Status 14:54:51 INFO] reading housekeeping
[Status 14:55:09 INFO] acquire complete
[Status 14:55:10 INFO] writing housekeeping
[Sequencer 14:55:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:55:10 INFO] incremented W scene to 269 completed views
[Sequencer 14:55:10 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:55:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:55:10 INFO] incremented to [AERI set: name X269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:55:10 INFO] W269.SIG(18)
[sigmove 14:55:10 DEBUG] transformed W269Ma.SPC -> W269MA.SPC
[sigmove 14:55:10 DEBUG] transformed W269Mb.SPC -> W269MB.SPC
[sigmove 14:55:10 DEBUG] transformed W269Mc.SPC -> W269MC.SPC
[sigmove 14:55:10 DEBUG] transformed W269Md.SPC -> W269MD.SPC
[sigmove 14:55:10 DEBUG] transformed W269Me.SPC -> W269ME.SPC
[sigmove 14:55:10 DEBUG] transformed W269Mf.SPC -> W269MF.SPC
[Status 14:55:10 INFO] data for W269 transferred to science data processing
[Tidy 14:55:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:55:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:55:10 INFO] resetting WatchDogTimer
[Status 14:55:10 INFO] Starting Set [AERI set: name X269, 6 scans, 0 angle, D16300 command]
[Ingest 14:55:10 INFO] Sending XML status message
[Status 14:55:10 INFO] Mirror angle: 0
[Mirror 14:55:10 INFO] rotating to position X
[Status 14:55:11 INFO] .SET file for ACQ96 ready
[Ingest 14:55:11 INFO] Starting acquisition
[Status 14:55:11 INFO] reading housekeeping
[Status 14:55:29 INFO] acquire complete
[Status 14:55:30 INFO] writing housekeeping
[Sequencer 14:55:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:55:30 INFO] incremented X scene to 269 completed views
[Sequencer 14:55:30 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:55:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:55:30 INFO] incremented to [AERI set: name Y269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:55:30 INFO] X269.SIG(18)
[sigmove 14:55:30 DEBUG] transformed X269Ma.SPC -> X269MA.SPC
[sigmove 14:55:30 DEBUG] transformed X269Mb.SPC -> X269MB.SPC
[sigmove 14:55:30 DEBUG] transformed X269Mc.SPC -> X269MC.SPC
[sigmove 14:55:30 DEBUG] transformed X269Md.SPC -> X269MD.SPC
[sigmove 14:55:30 DEBUG] transformed X269Me.SPC -> X269ME.SPC
[sigmove 14:55:30 DEBUG] transformed X269Mf.SPC -> X269MF.SPC
[Status 14:55:30 INFO] data for X269 transferred to science data processing
[Tidy 14:55:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:55:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:55:30 INFO] resetting WatchDogTimer
[Status 14:55:30 INFO] Starting Set [AERI set: name Y269, 6 scans, 0 angle, D16300 command]
[Ingest 14:55:30 INFO] Sending XML status message
[Status 14:55:30 INFO] Mirror angle: 0
[Mirror 14:55:30 INFO] rotating to position Y
[Status 14:55:31 INFO] .SET file for ACQ96 ready
[Ingest 14:55:31 INFO] Starting acquisition
[Status 14:55:31 INFO] reading housekeeping
[Status 14:55:49 INFO] acquire complete
[Status 14:55:50 INFO] writing housekeeping
[Sequencer 14:55:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:55:50 INFO] incremented Y scene to 269 completed views
[Sequencer 14:55:50 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:55:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:55:50 INFO] incremented to [AERI set: name Z269, 6 scans, 0 angle, D16300 command] set
[sigmove 14:55:50 INFO] Y269.SIG(18)
[sigmove 14:55:50 DEBUG] transformed Y269Ma.SPC -> Y269MA.SPC
[sigmove 14:55:50 DEBUG] transformed Y269Mb.SPC -> Y269MB.SPC
[sigmove 14:55:50 DEBUG] transformed Y269Mc.SPC -> Y269MC.SPC
[sigmove 14:55:50 DEBUG] transformed Y269Md.SPC -> Y269MD.SPC
[sigmove 14:55:50 DEBUG] transformed Y269Me.SPC -> Y269ME.SPC
[sigmove 14:55:50 DEBUG] transformed Y269Mf.SPC -> Y269MF.SPC
[Status 14:55:50 INFO] data for Y269 transferred to science data processing
[Tidy 14:55:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:55:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:55:50 INFO] resetting WatchDogTimer
[Status 14:55:50 INFO] Starting Set [AERI set: name Z269, 6 scans, 0 angle, D16300 command]
[Ingest 14:55:50 INFO] Sending XML status message
[Status 14:55:50 INFO] Mirror angle: 0
[Mirror 14:55:51 INFO] rotating to position Z
[Status 14:55:51 INFO] .SET file for ACQ96 ready
[Ingest 14:55:51 INFO] Starting acquisition
[Status 14:55:52 INFO] reading housekeeping
[Status 14:56:09 INFO] acquire complete
[Status 14:56:10 INFO] writing housekeeping
[Sequencer 14:56:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:56:10 INFO] incremented Z scene to 269 completed views
[Sequencer 14:56:10 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:56:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:56:10 INFO] incremented to [AERI set: name A270, 6 scans, 120 angle, D28300 command] set
[sigmove 14:56:10 INFO] Z269.SIG(18)
[sigmove 14:56:10 DEBUG] transformed Z269Ma.SPC -> Z269MA.SPC
[sigmove 14:56:10 DEBUG] transformed Z269Mb.SPC -> Z269MB.SPC
[sigmove 14:56:10 DEBUG] transformed Z269Mc.SPC -> Z269MC.SPC
[sigmove 14:56:10 DEBUG] transformed Z269Md.SPC -> Z269MD.SPC
[sigmove 14:56:10 DEBUG] transformed Z269Me.SPC -> Z269ME.SPC
[sigmove 14:56:10 DEBUG] transformed Z269Mf.SPC -> Z269MF.SPC
[Status 14:56:10 INFO] data for Z269 transferred to science data processing
[Tidy 14:56:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:56:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:56:10 INFO] resetting WatchDogTimer
[Status 14:56:10 INFO] Starting Set [AERI set: name A270, 6 scans, 120 angle, D28300 command]
[Ingest 14:56:10 INFO] Sending XML status message
[Status 14:56:10 INFO] Mirror angle: 120
[Mirror 14:56:11 INFO] rotating to position A
[Status 14:56:12 INFO] .SET file for ACQ96 ready
[Ingest 14:56:13 INFO] Starting acquisition
[Status 14:56:13 INFO] reading housekeeping
[Status 14:56:30 INFO] acquire complete
[Status 14:56:33 INFO] writing housekeeping
[Sequencer 14:56:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:56:33 INFO] incremented A scene to 270 completed views
[Sequencer 14:56:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:56:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:56:33 INFO] incremented to [AERI set: name H270, 6 scans, 60 angle, D22500 command] set
[sigmove 14:56:33 INFO] A270.SIG(18)
[sigmove 14:56:33 DEBUG] transformed A270Ma.SPC -> A270MA.SPC
[sigmove 14:56:33 DEBUG] transformed A270Mb.SPC -> A270MB.SPC
[sigmove 14:56:33 DEBUG] transformed A270Mc.SPC -> A270MC.SPC
[sigmove 14:56:33 DEBUG] transformed A270Md.SPC -> A270MD.SPC
[sigmove 14:56:33 DEBUG] transformed A270Me.SPC -> A270ME.SPC
[sigmove 14:56:33 DEBUG] transformed A270Mf.SPC -> A270MF.SPC
[Status 14:56:33 INFO] data for A270 transferred to science data processing
[Tidy 14:56:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:56:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:56:33 INFO] resetting WatchDogTimer
[Status 14:56:33 INFO] Starting Set [AERI set: name H270, 6 scans, 60 angle, D22500 command]
[Ingest 14:56:33 INFO] Sending XML status message
[Status 14:56:33 INFO] Mirror angle: 60
[Mirror 14:56:33 INFO] rotating to position H
[Status 14:56:34 INFO] .SET file for ACQ96 ready
[Ingest 14:56:35 INFO] Starting acquisition
[Status 14:56:35 INFO] reading housekeeping
[Status 14:56:53 INFO] acquire complete
[Status 14:56:54 INFO] writing housekeeping
[Sequencer 14:56:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:56:54 INFO] incremented H scene to 270 completed views
[Sequencer 14:56:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 14:56:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:56:54 INFO] incremented to [AERI set: name S270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:56:54 INFO] H270.SIG(18)
[sigmove 14:56:54 DEBUG] transformed H270Ma.SPC -> H270MA.SPC
[sigmove 14:56:54 DEBUG] transformed H270Mb.SPC -> H270MB.SPC
[sigmove 14:56:54 DEBUG] transformed H270Mc.SPC -> H270MC.SPC
[sigmove 14:56:54 DEBUG] transformed H270Md.SPC -> H270MD.SPC
[sigmove 14:56:54 DEBUG] transformed H270Me.SPC -> H270ME.SPC
[sigmove 14:56:54 DEBUG] transformed H270Mf.SPC -> H270MF.SPC
[Status 14:56:54 INFO] data for H270 transferred to science data processing
[Tidy 14:56:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:56:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:56:54 INFO] resetting WatchDogTimer
[Status 14:56:54 INFO] Starting Set [AERI set: name S270, 6 scans, 0 angle, D16300 command]
[Ingest 14:56:54 INFO] Sending XML status message
[Status 14:56:54 INFO] Mirror angle: 0
[Mirror 14:56:55 INFO] rotating to position S
[Status 14:56:56 INFO] .SET file for ACQ96 ready
[Ingest 14:56:56 INFO] Starting acquisition
[Status 14:56:56 INFO] reading housekeeping
[Status 14:57:14 INFO] acquire complete
[Status 14:57:15 INFO] writing housekeeping
[Sequencer 14:57:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:57:15 INFO] incremented S scene to 270 completed views
[Sequencer 14:57:15 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:57:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:57:15 INFO] incremented to [AERI set: name T270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:57:15 INFO] S270.SIG(18)
[sigmove 14:57:15 DEBUG] transformed S270Ma.SPC -> S270MA.SPC
[sigmove 14:57:15 DEBUG] transformed S270Mb.SPC -> S270MB.SPC
[sigmove 14:57:15 DEBUG] transformed S270Mc.SPC -> S270MC.SPC
[sigmove 14:57:15 DEBUG] transformed S270Md.SPC -> S270MD.SPC
[sigmove 14:57:15 DEBUG] transformed S270Me.SPC -> S270ME.SPC
[sigmove 14:57:15 DEBUG] transformed S270Mf.SPC -> S270MF.SPC
[Status 14:57:15 INFO] data for S270 transferred to science data processing
[Tidy 14:57:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:57:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:57:15 INFO] resetting WatchDogTimer
[Status 14:57:16 INFO] Starting Set [AERI set: name T270, 6 scans, 0 angle, D16300 command]
[Ingest 14:57:16 INFO] Sending XML status message
[Status 14:57:16 INFO] Mirror angle: 0
[Mirror 14:57:16 INFO] rotating to position T
[Status 14:57:16 INFO] .SET file for ACQ96 ready
[Ingest 14:57:17 INFO] Starting acquisition
[Status 14:57:17 INFO] reading housekeeping
[Status 14:57:34 INFO] acquire complete
[Status 14:57:35 INFO] writing housekeeping
[Sequencer 14:57:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:57:35 INFO] incremented T scene to 270 completed views
[Sequencer 14:57:35 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:57:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:57:35 INFO] incremented to [AERI set: name U270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:57:35 INFO] T270.SIG(18)
[sigmove 14:57:35 DEBUG] transformed T270Ma.SPC -> T270MA.SPC
[sigmove 14:57:35 DEBUG] transformed T270Mb.SPC -> T270MB.SPC
[sigmove 14:57:35 DEBUG] transformed T270Mc.SPC -> T270MC.SPC
[sigmove 14:57:35 DEBUG] transformed T270Md.SPC -> T270MD.SPC
[sigmove 14:57:35 DEBUG] transformed T270Me.SPC -> T270ME.SPC
[sigmove 14:57:35 DEBUG] transformed T270Mf.SPC -> T270MF.SPC
[Status 14:57:35 INFO] data for T270 transferred to science data processing
[Tidy 14:57:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:57:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:57:35 INFO] resetting WatchDogTimer
[Status 14:57:36 INFO] Starting Set [AERI set: name U270, 6 scans, 0 angle, D16300 command]
[Ingest 14:57:36 INFO] Sending XML status message
[Status 14:57:36 INFO] Mirror angle: 0
[Mirror 14:57:36 INFO] rotating to position U
[Status 14:57:36 INFO] .SET file for ACQ96 ready
[Ingest 14:57:37 INFO] Starting acquisition
[Status 14:57:37 INFO] reading housekeeping
[Status 14:57:55 INFO] acquire complete
[Status 14:57:56 INFO] writing housekeeping
[Sequencer 14:57:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:57:56 INFO] incremented U scene to 270 completed views
[Sequencer 14:57:56 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:57:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:57:56 INFO] incremented to [AERI set: name V270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:57:56 INFO] U270.SIG(18)
[sigmove 14:57:56 DEBUG] transformed U270Ma.SPC -> U270MA.SPC
[sigmove 14:57:56 DEBUG] transformed U270Mb.SPC -> U270MB.SPC
[sigmove 14:57:56 DEBUG] transformed U270Mc.SPC -> U270MC.SPC
[sigmove 14:57:56 DEBUG] transformed U270Md.SPC -> U270MD.SPC
[sigmove 14:57:56 DEBUG] transformed U270Me.SPC -> U270ME.SPC
[sigmove 14:57:56 DEBUG] transformed U270Mf.SPC -> U270MF.SPC
[Status 14:57:56 INFO] data for U270 transferred to science data processing
[Tidy 14:57:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:57:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:57:56 INFO] resetting WatchDogTimer
[Status 14:57:56 INFO] Starting Set [AERI set: name V270, 6 scans, 0 angle, D16300 command]
[Ingest 14:57:56 INFO] Sending XML status message
[Status 14:57:56 INFO] Mirror angle: 0
[Mirror 14:57:56 INFO] rotating to position V
[Status 14:57:57 INFO] .SET file for ACQ96 ready
[Ingest 14:57:57 INFO] Starting acquisition
[Status 14:57:57 INFO] reading housekeeping
[Status 14:58:15 INFO] acquire complete
[Status 14:58:16 INFO] writing housekeeping
[Sequencer 14:58:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:58:16 INFO] incremented V scene to 270 completed views
[Sequencer 14:58:16 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:58:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:58:16 INFO] incremented to [AERI set: name W270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:58:16 INFO] V270.SIG(18)
[sigmove 14:58:16 DEBUG] transformed V270Ma.SPC -> V270MA.SPC
[sigmove 14:58:16 DEBUG] transformed V270Mb.SPC -> V270MB.SPC
[sigmove 14:58:16 DEBUG] transformed V270Mc.SPC -> V270MC.SPC
[sigmove 14:58:16 DEBUG] transformed V270Md.SPC -> V270MD.SPC
[sigmove 14:58:16 DEBUG] transformed V270Me.SPC -> V270ME.SPC
[sigmove 14:58:16 DEBUG] transformed V270Mf.SPC -> V270MF.SPC
[Status 14:58:16 INFO] data for V270 transferred to science data processing
[Tidy 14:58:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:58:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:58:16 INFO] resetting WatchDogTimer
[Status 14:58:16 INFO] Starting Set [AERI set: name W270, 6 scans, 0 angle, D16300 command]
[Ingest 14:58:16 INFO] Sending XML status message
[Status 14:58:16 INFO] Mirror angle: 0
[Mirror 14:58:16 INFO] rotating to position W
[Status 14:58:17 INFO] .SET file for ACQ96 ready
[Ingest 14:58:17 INFO] Starting acquisition
[Status 14:58:17 INFO] reading housekeeping
[Status 14:58:35 INFO] acquire complete
[Status 14:58:36 INFO] writing housekeeping
[Sequencer 14:58:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:58:36 INFO] incremented W scene to 270 completed views
[Sequencer 14:58:36 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:58:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:58:36 INFO] incremented to [AERI set: name X270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:58:36 INFO] W270.SIG(18)
[sigmove 14:58:36 DEBUG] transformed W270Ma.SPC -> W270MA.SPC
[sigmove 14:58:36 DEBUG] transformed W270Mb.SPC -> W270MB.SPC
[sigmove 14:58:36 DEBUG] transformed W270Mc.SPC -> W270MC.SPC
[sigmove 14:58:36 DEBUG] transformed W270Md.SPC -> W270MD.SPC
[sigmove 14:58:36 DEBUG] transformed W270Me.SPC -> W270ME.SPC
[sigmove 14:58:36 DEBUG] transformed W270Mf.SPC -> W270MF.SPC
[Status 14:58:36 INFO] data for W270 transferred to science data processing
[Tidy 14:58:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:58:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:58:36 INFO] resetting WatchDogTimer
[Status 14:58:36 INFO] Starting Set [AERI set: name X270, 6 scans, 0 angle, D16300 command]
[Ingest 14:58:36 INFO] Sending XML status message
[Status 14:58:36 INFO] Mirror angle: 0
[Mirror 14:58:37 INFO] rotating to position X
[Status 14:58:37 INFO] .SET file for ACQ96 ready
[Ingest 14:58:37 INFO] Starting acquisition
[Status 14:58:38 INFO] reading housekeeping
[Status 14:58:55 INFO] acquire complete
[Status 14:58:56 INFO] writing housekeeping
[Sequencer 14:58:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:58:56 INFO] incremented X scene to 270 completed views
[Sequencer 14:58:56 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:58:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:58:56 INFO] incremented to [AERI set: name Y270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:58:56 INFO] X270.SIG(18)
[sigmove 14:58:56 DEBUG] transformed X270Ma.SPC -> X270MA.SPC
[sigmove 14:58:56 DEBUG] transformed X270Mb.SPC -> X270MB.SPC
[sigmove 14:58:56 DEBUG] transformed X270Mc.SPC -> X270MC.SPC
[sigmove 14:58:56 DEBUG] transformed X270Md.SPC -> X270MD.SPC
[sigmove 14:58:56 DEBUG] transformed X270Me.SPC -> X270ME.SPC
[sigmove 14:58:56 DEBUG] transformed X270Mf.SPC -> X270MF.SPC
[Status 14:58:56 INFO] data for X270 transferred to science data processing
[Tidy 14:58:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:58:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:58:56 INFO] resetting WatchDogTimer
[Status 14:58:56 INFO] Starting Set [AERI set: name Y270, 6 scans, 0 angle, D16300 command]
[Ingest 14:58:56 INFO] Sending XML status message
[Status 14:58:56 INFO] Mirror angle: 0
[Mirror 14:58:57 INFO] rotating to position Y
[Status 14:58:57 INFO] .SET file for ACQ96 ready
[Ingest 14:58:58 INFO] Starting acquisition
[Status 14:58:58 INFO] reading housekeeping
[Status 14:59:15 INFO] acquire complete
[Status 14:59:16 INFO] writing housekeeping
[Sequencer 14:59:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:59:16 INFO] incremented Y scene to 270 completed views
[Sequencer 14:59:16 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 14:59:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:59:16 INFO] incremented to [AERI set: name Z270, 6 scans, 0 angle, D16300 command] set
[sigmove 14:59:16 INFO] Y270.SIG(18)
[sigmove 14:59:16 DEBUG] transformed Y270Ma.SPC -> Y270MA.SPC
[sigmove 14:59:16 DEBUG] transformed Y270Mb.SPC -> Y270MB.SPC
[sigmove 14:59:16 DEBUG] transformed Y270Mc.SPC -> Y270MC.SPC
[sigmove 14:59:16 DEBUG] transformed Y270Md.SPC -> Y270MD.SPC
[sigmove 14:59:16 DEBUG] transformed Y270Me.SPC -> Y270ME.SPC
[sigmove 14:59:16 DEBUG] transformed Y270Mf.SPC -> Y270MF.SPC
[Status 14:59:16 INFO] data for Y270 transferred to science data processing
[Tidy 14:59:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:59:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:59:16 INFO] resetting WatchDogTimer
[Status 14:59:17 INFO] Starting Set [AERI set: name Z270, 6 scans, 0 angle, D16300 command]
[Ingest 14:59:17 INFO] Sending XML status message
[Status 14:59:17 INFO] Mirror angle: 0
[Mirror 14:59:17 INFO] rotating to position Z
[Status 14:59:17 INFO] .SET file for ACQ96 ready
[Ingest 14:59:18 INFO] Starting acquisition
[Status 14:59:18 INFO] reading housekeeping
[Status 14:59:36 INFO] acquire complete
[Status 14:59:36 INFO] writing housekeeping
[Sequencer 14:59:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:59:36 INFO] incremented Z scene to 270 completed views
[Sequencer 14:59:36 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 14:59:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:59:36 INFO] incremented to [AERI set: name H271, 6 scans, 60 angle, D22500 command] set
[sigmove 14:59:36 INFO] Z270.SIG(18)
[sigmove 14:59:37 DEBUG] transformed Z270Ma.SPC -> Z270MA.SPC
[sigmove 14:59:37 DEBUG] transformed Z270Mb.SPC -> Z270MB.SPC
[sigmove 14:59:37 DEBUG] transformed Z270Mc.SPC -> Z270MC.SPC
[sigmove 14:59:37 DEBUG] transformed Z270Md.SPC -> Z270MD.SPC
[sigmove 14:59:37 DEBUG] transformed Z270Me.SPC -> Z270ME.SPC
[sigmove 14:59:37 DEBUG] transformed Z270Mf.SPC -> Z270MF.SPC
[Status 14:59:37 INFO] data for Z270 transferred to science data processing
[Tidy 14:59:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 14:59:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 14:59:37 INFO] resetting WatchDogTimer
[Status 14:59:37 INFO] Starting Set [AERI set: name H271, 6 scans, 60 angle, D22500 command]
[Ingest 14:59:37 INFO] Sending XML status message
[Status 14:59:37 INFO] Mirror angle: 60
[Mirror 14:59:37 INFO] rotating to position H
[Status 14:59:38 INFO] .SET file for ACQ96 ready
[Ingest 14:59:38 INFO] Starting acquisition
[Status 14:59:39 INFO] reading housekeeping
[Status 14:59:57 INFO] acquire complete
[Status 14:59:58 INFO] writing housekeeping
[Sequencer 14:59:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 14:59:58 INFO] incremented H scene to 271 completed views
[Sequencer 14:59:58 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 14:59:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 14:59:58 INFO] incremented to [AERI set: name A271, 6 scans, 120 angle, D28300 command] set
[sigmove 14:59:58 INFO] H271.SIG(18)
[sigmove 14:59:58 DEBUG] transformed H271Ma.SPC -> H271MA.SPC
[sigmove 14:59:58 DEBUG] transformed H271Mb.SPC -> H271MB.SPC
[sigmove 14:59:58 DEBUG] transformed H271Mc.SPC -> H271MC.SPC
[sigmove 14:59:58 DEBUG] transformed H271Md.SPC -> H271MD.SPC
[sigmove 14:59:58 DEBUG] transformed H271Me.SPC -> H271ME.SPC
[sigmove 14:59:58 DEBUG] transformed H271Mf.SPC -> H271MF.SPC
[Status 14:59:58 INFO] data for H271 transferred to science data processing
[Tidy 14:59:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:59:58 INFO] A269.FIN(19),H269.FIN(19),S269.FIN(19),T269.FIN(19),U269.FIN(19),V269.FIN(19),W269.FIN(19),X269.FIN(19),Y269.FIN(19),Z269.FIN(19),A270.FIN(19),H270.FIN(19),S270.FIN(19),T270.FIN(19),U270.FIN(19),V270.FIN(19),W270.FIN(19),X270.FIN(19),Y270.FIN(19),Z270.FIN(19)
[sigmove 14:59:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 14:59:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:00:02 DEBUG] done zipping
[WatchDog 15:00:03 INFO] resetting WatchDogTimer
[Status 15:00:03 INFO] Starting Set [AERI set: name A271, 6 scans, 120 angle, D28300 command]
[Ingest 15:00:03 INFO] Sending XML status message
[Status 15:00:03 INFO] Mirror angle: 120
[Mirror 15:00:04 INFO] rotating to position A
[Status 15:00:05 INFO] .SET file for ACQ96 ready
[Ingest 15:00:05 INFO] Starting acquisition
[Status 15:00:05 INFO] reading housekeeping
[Status 15:00:23 INFO] acquire complete
[Status 15:00:24 INFO] writing housekeeping
[Sequencer 15:00:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:00:24 INFO] incremented A scene to 271 completed views
[Sequencer 15:00:24 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:00:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:00:24 INFO] incremented to [AERI set: name S271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:00:24 INFO] A271.SIG(18)
[sigmove 15:00:24 DEBUG] transformed A271Ma.SPC -> A271MA.SPC
[sigmove 15:00:24 DEBUG] transformed A271Mb.SPC -> A271MB.SPC
[sigmove 15:00:24 DEBUG] transformed A271Mc.SPC -> A271MC.SPC
[sigmove 15:00:24 DEBUG] transformed A271Md.SPC -> A271MD.SPC
[sigmove 15:00:24 DEBUG] transformed A271Me.SPC -> A271ME.SPC
[sigmove 15:00:24 DEBUG] transformed A271Mf.SPC -> A271MF.SPC
[Status 15:00:24 INFO] data for A271 transferred to science data processing
[Tidy 15:00:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:00:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:00:24 INFO] resetting WatchDogTimer
[Status 15:00:24 INFO] Starting Set [AERI set: name S271, 6 scans, 0 angle, D16300 command]
[Ingest 15:00:24 INFO] Sending XML status message
[Status 15:00:24 INFO] Mirror angle: 0
[Mirror 15:00:24 INFO] rotating to position S
[Status 15:00:26 INFO] .SET file for ACQ96 ready
[Ingest 15:00:26 INFO] Starting acquisition
[Status 15:00:27 INFO] reading housekeeping
[Status 15:00:44 INFO] acquire complete
[Status 15:00:45 INFO] writing housekeeping
[Sequencer 15:00:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:00:45 INFO] incremented S scene to 271 completed views
[Sequencer 15:00:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:00:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:00:45 INFO] incremented to [AERI set: name T271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:00:45 INFO] S271.SIG(18)
[sigmove 15:00:45 DEBUG] transformed S271Ma.SPC -> S271MA.SPC
[sigmove 15:00:45 DEBUG] transformed S271Mb.SPC -> S271MB.SPC
[sigmove 15:00:45 DEBUG] transformed S271Mc.SPC -> S271MC.SPC
[sigmove 15:00:45 DEBUG] transformed S271Md.SPC -> S271MD.SPC
[sigmove 15:00:45 DEBUG] transformed S271Me.SPC -> S271ME.SPC
[sigmove 15:00:45 DEBUG] transformed S271Mf.SPC -> S271MF.SPC
[Status 15:00:45 INFO] data for S271 transferred to science data processing
[Tidy 15:00:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:00:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:00:45 INFO] resetting WatchDogTimer
[Status 15:00:45 INFO] Starting Set [AERI set: name T271, 6 scans, 0 angle, D16300 command]
[Ingest 15:00:45 INFO] Sending XML status message
[Status 15:00:45 INFO] Mirror angle: 0
[Mirror 15:00:46 INFO] rotating to position T
[Status 15:00:46 INFO] .SET file for ACQ96 ready
[Ingest 15:00:46 INFO] Starting acquisition
[Status 15:00:47 INFO] reading housekeeping
[Status 15:01:04 INFO] acquire complete
[Status 15:01:05 INFO] writing housekeeping
[Sequencer 15:01:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:01:05 INFO] incremented T scene to 271 completed views
[Sequencer 15:01:05 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:01:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:01:05 INFO] incremented to [AERI set: name U271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:01:05 INFO] T271.SIG(18)
[sigmove 15:01:05 DEBUG] transformed T271Ma.SPC -> T271MA.SPC
[sigmove 15:01:05 DEBUG] transformed T271Mb.SPC -> T271MB.SPC
[sigmove 15:01:05 DEBUG] transformed T271Mc.SPC -> T271MC.SPC
[sigmove 15:01:05 DEBUG] transformed T271Md.SPC -> T271MD.SPC
[sigmove 15:01:05 DEBUG] transformed T271Me.SPC -> T271ME.SPC
[sigmove 15:01:05 DEBUG] transformed T271Mf.SPC -> T271MF.SPC
[Status 15:01:05 INFO] data for T271 transferred to science data processing
[Tidy 15:01:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:01:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:01:05 INFO] resetting WatchDogTimer
[Status 15:01:06 INFO] Starting Set [AERI set: name U271, 6 scans, 0 angle, D16300 command]
[Ingest 15:01:06 INFO] Sending XML status message
[Status 15:01:06 INFO] Mirror angle: 0
[Mirror 15:01:06 INFO] rotating to position U
[Status 15:01:06 INFO] .SET file for ACQ96 ready
[Ingest 15:01:07 INFO] Starting acquisition
[Status 15:01:07 INFO] reading housekeeping
[Status 15:01:24 INFO] acquire complete
[Status 15:01:25 INFO] writing housekeeping
[Sequencer 15:01:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:01:25 INFO] incremented U scene to 271 completed views
[Sequencer 15:01:25 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:01:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:01:25 INFO] incremented to [AERI set: name V271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:01:25 INFO] U271.SIG(18)
[sigmove 15:01:25 DEBUG] transformed U271Ma.SPC -> U271MA.SPC
[sigmove 15:01:25 DEBUG] transformed U271Mb.SPC -> U271MB.SPC
[sigmove 15:01:25 DEBUG] transformed U271Mc.SPC -> U271MC.SPC
[sigmove 15:01:25 DEBUG] transformed U271Md.SPC -> U271MD.SPC
[sigmove 15:01:25 DEBUG] transformed U271Me.SPC -> U271ME.SPC
[sigmove 15:01:25 DEBUG] transformed U271Mf.SPC -> U271MF.SPC
[Status 15:01:25 INFO] data for U271 transferred to science data processing
[Tidy 15:01:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:01:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:01:25 INFO] resetting WatchDogTimer
[Status 15:01:26 INFO] Starting Set [AERI set: name V271, 6 scans, 0 angle, D16300 command]
[Ingest 15:01:26 INFO] Sending XML status message
[Status 15:01:26 INFO] Mirror angle: 0
[Mirror 15:01:26 INFO] rotating to position V
[Status 15:01:27 INFO] .SET file for ACQ96 ready
[Ingest 15:01:27 INFO] Starting acquisition
[Status 15:01:27 INFO] reading housekeeping
[Status 15:01:45 INFO] acquire complete
[Status 15:01:46 INFO] writing housekeeping
[Sequencer 15:01:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:01:46 INFO] incremented V scene to 271 completed views
[Sequencer 15:01:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:01:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:01:46 INFO] incremented to [AERI set: name W271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:01:46 INFO] V271.SIG(18)
[sigmove 15:01:46 DEBUG] transformed V271Ma.SPC -> V271MA.SPC
[sigmove 15:01:46 DEBUG] transformed V271Mb.SPC -> V271MB.SPC
[sigmove 15:01:46 DEBUG] transformed V271Mc.SPC -> V271MC.SPC
[sigmove 15:01:46 DEBUG] transformed V271Md.SPC -> V271MD.SPC
[sigmove 15:01:46 DEBUG] transformed V271Me.SPC -> V271ME.SPC
[sigmove 15:01:46 DEBUG] transformed V271Mf.SPC -> V271MF.SPC
[Status 15:01:46 INFO] data for V271 transferred to science data processing
[Tidy 15:01:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:01:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:01:46 INFO] resetting WatchDogTimer
[Status 15:01:46 INFO] Starting Set [AERI set: name W271, 6 scans, 0 angle, D16300 command]
[Ingest 15:01:46 INFO] Sending XML status message
[Status 15:01:46 INFO] Mirror angle: 0
[Mirror 15:01:46 INFO] rotating to position W
[Status 15:01:47 INFO] .SET file for ACQ96 ready
[Ingest 15:01:47 INFO] Starting acquisition
[Status 15:01:47 INFO] reading housekeeping
[Status 15:02:05 INFO] acquire complete
[Status 15:02:06 INFO] writing housekeeping
[Sequencer 15:02:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:02:06 INFO] incremented W scene to 271 completed views
[Sequencer 15:02:06 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:02:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:02:06 INFO] incremented to [AERI set: name X271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:02:06 INFO] W271.SIG(18)
[sigmove 15:02:06 DEBUG] transformed W271Ma.SPC -> W271MA.SPC
[sigmove 15:02:06 DEBUG] transformed W271Mb.SPC -> W271MB.SPC
[sigmove 15:02:06 DEBUG] transformed W271Mc.SPC -> W271MC.SPC
[sigmove 15:02:06 DEBUG] transformed W271Md.SPC -> W271MD.SPC
[sigmove 15:02:06 DEBUG] transformed W271Me.SPC -> W271ME.SPC
[sigmove 15:02:06 DEBUG] transformed W271Mf.SPC -> W271MF.SPC
[Status 15:02:06 INFO] data for W271 transferred to science data processing
[Tidy 15:02:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:02:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:02:06 INFO] resetting WatchDogTimer
[Status 15:02:06 INFO] Starting Set [AERI set: name X271, 6 scans, 0 angle, D16300 command]
[Ingest 15:02:06 INFO] Sending XML status message
[Status 15:02:06 INFO] Mirror angle: 0
[Mirror 15:02:06 INFO] rotating to position X
[Status 15:02:07 INFO] .SET file for ACQ96 ready
[Ingest 15:02:07 INFO] Starting acquisition
[Status 15:02:08 INFO] reading housekeeping
[Status 15:02:25 INFO] acquire complete
[Status 15:02:26 INFO] writing housekeeping
[Sequencer 15:02:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:02:26 INFO] incremented X scene to 271 completed views
[Sequencer 15:02:26 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:02:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:02:26 INFO] incremented to [AERI set: name Y271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:02:26 INFO] X271.SIG(18)
[sigmove 15:02:26 DEBUG] transformed X271Ma.SPC -> X271MA.SPC
[sigmove 15:02:26 DEBUG] transformed X271Mb.SPC -> X271MB.SPC
[sigmove 15:02:26 DEBUG] transformed X271Mc.SPC -> X271MC.SPC
[sigmove 15:02:26 DEBUG] transformed X271Md.SPC -> X271MD.SPC
[sigmove 15:02:26 DEBUG] transformed X271Me.SPC -> X271ME.SPC
[sigmove 15:02:26 DEBUG] transformed X271Mf.SPC -> X271MF.SPC
[Status 15:02:26 INFO] data for X271 transferred to science data processing
[Tidy 15:02:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:02:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:02:26 INFO] resetting WatchDogTimer
[Status 15:02:26 INFO] Starting Set [AERI set: name Y271, 6 scans, 0 angle, D16300 command]
[Ingest 15:02:26 INFO] Sending XML status message
[Status 15:02:26 INFO] Mirror angle: 0
[Mirror 15:02:27 INFO] rotating to position Y
[Status 15:02:27 INFO] .SET file for ACQ96 ready
[Ingest 15:02:27 INFO] Starting acquisition
[Status 15:02:28 INFO] reading housekeeping
[Status 15:02:45 INFO] acquire complete
[Status 15:02:46 INFO] writing housekeeping
[Sequencer 15:02:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:02:46 INFO] incremented Y scene to 271 completed views
[Sequencer 15:02:46 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:02:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:02:46 INFO] incremented to [AERI set: name Z271, 6 scans, 0 angle, D16300 command] set
[sigmove 15:02:46 INFO] Y271.SIG(18)
[sigmove 15:02:46 DEBUG] transformed Y271Ma.SPC -> Y271MA.SPC
[sigmove 15:02:46 DEBUG] transformed Y271Mb.SPC -> Y271MB.SPC
[sigmove 15:02:46 DEBUG] transformed Y271Mc.SPC -> Y271MC.SPC
[sigmove 15:02:46 DEBUG] transformed Y271Md.SPC -> Y271MD.SPC
[sigmove 15:02:46 DEBUG] transformed Y271Me.SPC -> Y271ME.SPC
[sigmove 15:02:46 DEBUG] transformed Y271Mf.SPC -> Y271MF.SPC
[Status 15:02:46 INFO] data for Y271 transferred to science data processing
[Tidy 15:02:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:02:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:02:46 INFO] resetting WatchDogTimer
[Status 15:02:46 INFO] Starting Set [AERI set: name Z271, 6 scans, 0 angle, D16300 command]
[Ingest 15:02:46 INFO] Sending XML status message
[Status 15:02:46 INFO] Mirror angle: 0
[Mirror 15:02:47 INFO] rotating to position Z
[Status 15:02:47 INFO] .SET file for ACQ96 ready
[Ingest 15:02:48 INFO] Starting acquisition
[Status 15:02:48 INFO] reading housekeeping
[Status 15:03:05 INFO] acquire complete
[Status 15:03:06 INFO] writing housekeeping
[Sequencer 15:03:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:03:06 INFO] incremented Z scene to 271 completed views
[Sequencer 15:03:06 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:03:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:03:06 INFO] incremented to [AERI set: name A272, 6 scans, 120 angle, D28300 command] set
[sigmove 15:03:06 INFO] Z271.SIG(18)
[sigmove 15:03:06 DEBUG] transformed Z271Ma.SPC -> Z271MA.SPC
[sigmove 15:03:06 DEBUG] transformed Z271Mb.SPC -> Z271MB.SPC
[sigmove 15:03:06 DEBUG] transformed Z271Mc.SPC -> Z271MC.SPC
[sigmove 15:03:06 DEBUG] transformed Z271Md.SPC -> Z271MD.SPC
[sigmove 15:03:06 DEBUG] transformed Z271Me.SPC -> Z271ME.SPC
[sigmove 15:03:06 DEBUG] transformed Z271Mf.SPC -> Z271MF.SPC
[Status 15:03:06 INFO] data for Z271 transferred to science data processing
[Tidy 15:03:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:03:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:03:06 INFO] resetting WatchDogTimer
[Status 15:03:07 INFO] Starting Set [AERI set: name A272, 6 scans, 120 angle, D28300 command]
[Ingest 15:03:07 INFO] Sending XML status message
[Status 15:03:07 INFO] Mirror angle: 120
[Mirror 15:03:07 INFO] rotating to position A
[Status 15:03:09 INFO] .SET file for ACQ96 ready
[Ingest 15:03:09 INFO] Starting acquisition
[Status 15:03:09 INFO] reading housekeeping
[Status 15:03:27 INFO] acquire complete
[Status 15:03:28 INFO] writing housekeeping
[Sequencer 15:03:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:03:28 INFO] incremented A scene to 272 completed views
[Sequencer 15:03:28 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:03:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:03:28 INFO] incremented to [AERI set: name H272, 6 scans, 60 angle, D22500 command] set
[sigmove 15:03:28 INFO] A272.SIG(18)
[sigmove 15:03:28 DEBUG] transformed A272Ma.SPC -> A272MA.SPC
[sigmove 15:03:28 DEBUG] transformed A272Mb.SPC -> A272MB.SPC
[sigmove 15:03:28 DEBUG] transformed A272Mc.SPC -> A272MC.SPC
[sigmove 15:03:28 DEBUG] transformed A272Md.SPC -> A272MD.SPC
[sigmove 15:03:28 DEBUG] transformed A272Me.SPC -> A272ME.SPC
[sigmove 15:03:28 DEBUG] transformed A272Mf.SPC -> A272MF.SPC
[Status 15:03:28 INFO] data for A272 transferred to science data processing
[Tidy 15:03:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:03:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:03:28 INFO] resetting WatchDogTimer
[Status 15:03:28 INFO] Starting Set [AERI set: name H272, 6 scans, 60 angle, D22500 command]
[Ingest 15:03:28 INFO] Sending XML status message
[Status 15:03:28 INFO] Mirror angle: 60
[Mirror 15:03:28 INFO] rotating to position H
[Status 15:03:29 INFO] .SET file for ACQ96 ready
[Ingest 15:03:30 INFO] Starting acquisition
[Status 15:03:30 INFO] reading housekeeping
[Status 15:03:48 INFO] acquire complete
[Status 15:03:49 INFO] writing housekeeping
[Sequencer 15:03:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:03:49 INFO] incremented H scene to 272 completed views
[Sequencer 15:03:49 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:03:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:03:49 INFO] incremented to [AERI set: name S272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:03:49 INFO] H272.SIG(18)
[sigmove 15:03:49 DEBUG] transformed H272Ma.SPC -> H272MA.SPC
[sigmove 15:03:49 DEBUG] transformed H272Mb.SPC -> H272MB.SPC
[sigmove 15:03:49 DEBUG] transformed H272Mc.SPC -> H272MC.SPC
[sigmove 15:03:49 DEBUG] transformed H272Md.SPC -> H272MD.SPC
[sigmove 15:03:49 DEBUG] transformed H272Me.SPC -> H272ME.SPC
[sigmove 15:03:49 DEBUG] transformed H272Mf.SPC -> H272MF.SPC
[Status 15:03:49 INFO] data for H272 transferred to science data processing
[Tidy 15:03:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:03:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:03:49 INFO] resetting WatchDogTimer
[Status 15:03:49 INFO] Starting Set [AERI set: name S272, 6 scans, 0 angle, D16300 command]
[Ingest 15:03:49 INFO] Sending XML status message
[Status 15:03:49 INFO] Mirror angle: 0
[Mirror 15:03:50 INFO] rotating to position S
[Status 15:03:51 INFO] .SET file for ACQ96 ready
[Ingest 15:03:51 INFO] Starting acquisition
[Status 15:03:51 INFO] reading housekeeping
[Status 15:04:09 INFO] acquire complete
[Status 15:04:10 INFO] writing housekeeping
[Sequencer 15:04:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:04:10 INFO] incremented S scene to 272 completed views
[Sequencer 15:04:10 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:04:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:04:10 INFO] incremented to [AERI set: name T272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:04:10 INFO] S272.SIG(18)
[sigmove 15:04:10 DEBUG] transformed S272Ma.SPC -> S272MA.SPC
[sigmove 15:04:10 DEBUG] transformed S272Mb.SPC -> S272MB.SPC
[sigmove 15:04:10 DEBUG] transformed S272Mc.SPC -> S272MC.SPC
[sigmove 15:04:10 DEBUG] transformed S272Md.SPC -> S272MD.SPC
[sigmove 15:04:10 DEBUG] transformed S272Me.SPC -> S272ME.SPC
[sigmove 15:04:10 DEBUG] transformed S272Mf.SPC -> S272MF.SPC
[Status 15:04:10 INFO] data for S272 transferred to science data processing
[Tidy 15:04:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:04:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:04:10 INFO] resetting WatchDogTimer
[Status 15:04:11 INFO] Starting Set [AERI set: name T272, 6 scans, 0 angle, D16300 command]
[Ingest 15:04:11 INFO] Sending XML status message
[Status 15:04:11 INFO] Mirror angle: 0
[Mirror 15:04:11 INFO] rotating to position T
[Status 15:04:11 INFO] .SET file for ACQ96 ready
[Ingest 15:04:12 INFO] Starting acquisition
[Status 15:04:12 INFO] reading housekeeping
[Status 15:04:30 INFO] acquire complete
[Status 15:04:30 INFO] writing housekeeping
[Sequencer 15:04:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:04:30 INFO] incremented T scene to 272 completed views
[Sequencer 15:04:30 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:04:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:04:30 INFO] incremented to [AERI set: name U272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:04:30 INFO] T272.SIG(18)
[sigmove 15:04:30 DEBUG] transformed T272Ma.SPC -> T272MA.SPC
[sigmove 15:04:30 DEBUG] transformed T272Mb.SPC -> T272MB.SPC
[sigmove 15:04:30 DEBUG] transformed T272Mc.SPC -> T272MC.SPC
[sigmove 15:04:30 DEBUG] transformed T272Md.SPC -> T272MD.SPC
[sigmove 15:04:30 DEBUG] transformed T272Me.SPC -> T272ME.SPC
[sigmove 15:04:30 DEBUG] transformed T272Mf.SPC -> T272MF.SPC
[Status 15:04:30 INFO] data for T272 transferred to science data processing
[Tidy 15:04:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:04:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:04:30 INFO] resetting WatchDogTimer
[Status 15:04:31 INFO] Starting Set [AERI set: name U272, 6 scans, 0 angle, D16300 command]
[Ingest 15:04:31 INFO] Sending XML status message
[Status 15:04:31 INFO] Mirror angle: 0
[Mirror 15:04:31 INFO] rotating to position U
[Status 15:04:32 INFO] .SET file for ACQ96 ready
[Ingest 15:04:32 INFO] Starting acquisition
[Status 15:04:33 INFO] reading housekeeping
[Status 15:04:51 INFO] acquire complete
[Status 15:04:52 INFO] writing housekeeping
[Sequencer 15:04:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:04:52 INFO] incremented U scene to 272 completed views
[Sequencer 15:04:52 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:04:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:04:52 INFO] incremented to [AERI set: name V272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:04:52 INFO] U272.SIG(18)
[sigmove 15:04:52 DEBUG] transformed U272Ma.SPC -> U272MA.SPC
[sigmove 15:04:52 DEBUG] transformed U272Mb.SPC -> U272MB.SPC
[sigmove 15:04:52 DEBUG] transformed U272Mc.SPC -> U272MC.SPC
[sigmove 15:04:52 DEBUG] transformed U272Md.SPC -> U272MD.SPC
[sigmove 15:04:52 DEBUG] transformed U272Me.SPC -> U272ME.SPC
[sigmove 15:04:52 DEBUG] transformed U272Mf.SPC -> U272MF.SPC
[Status 15:04:52 INFO] data for U272 transferred to science data processing
[Tidy 15:04:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:04:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:04:52 INFO] resetting WatchDogTimer
[Status 15:04:52 INFO] Starting Set [AERI set: name V272, 6 scans, 0 angle, D16300 command]
[Ingest 15:04:52 INFO] Sending XML status message
[Status 15:04:52 INFO] Mirror angle: 0
[Mirror 15:04:53 INFO] rotating to position V
[Status 15:04:53 INFO] .SET file for ACQ96 ready
[Ingest 15:04:53 INFO] Starting acquisition
[Status 15:04:54 INFO] reading housekeeping
[Status 15:05:11 INFO] acquire complete
[Status 15:05:12 INFO] writing housekeeping
[Sequencer 15:05:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:05:12 INFO] incremented V scene to 272 completed views
[Sequencer 15:05:12 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:05:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:05:12 INFO] incremented to [AERI set: name W272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:05:12 INFO] V272.SIG(18)
[sigmove 15:05:12 DEBUG] transformed V272Ma.SPC -> V272MA.SPC
[sigmove 15:05:12 DEBUG] transformed V272Mb.SPC -> V272MB.SPC
[sigmove 15:05:12 DEBUG] transformed V272Mc.SPC -> V272MC.SPC
[sigmove 15:05:12 DEBUG] transformed V272Md.SPC -> V272MD.SPC
[sigmove 15:05:12 DEBUG] transformed V272Me.SPC -> V272ME.SPC
[sigmove 15:05:12 DEBUG] transformed V272Mf.SPC -> V272MF.SPC
[Status 15:05:12 INFO] data for V272 transferred to science data processing
[Tidy 15:05:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:05:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:05:12 INFO] resetting WatchDogTimer
[Status 15:05:12 INFO] Starting Set [AERI set: name W272, 6 scans, 0 angle, D16300 command]
[Ingest 15:05:12 INFO] Sending XML status message
[Status 15:05:12 INFO] Mirror angle: 0
[Mirror 15:05:13 INFO] rotating to position W
[Status 15:05:13 INFO] .SET file for ACQ96 ready
[Ingest 15:05:13 INFO] Starting acquisition
[Status 15:05:14 INFO] reading housekeeping
[Status 15:05:31 INFO] acquire complete
[Status 15:05:32 INFO] writing housekeeping
[Sequencer 15:05:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:05:32 INFO] incremented W scene to 272 completed views
[Sequencer 15:05:32 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:05:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:05:32 INFO] incremented to [AERI set: name X272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:05:32 INFO] W272.SIG(18)
[sigmove 15:05:32 DEBUG] transformed W272Ma.SPC -> W272MA.SPC
[sigmove 15:05:32 DEBUG] transformed W272Mb.SPC -> W272MB.SPC
[sigmove 15:05:32 DEBUG] transformed W272Mc.SPC -> W272MC.SPC
[sigmove 15:05:32 DEBUG] transformed W272Md.SPC -> W272MD.SPC
[sigmove 15:05:32 DEBUG] transformed W272Me.SPC -> W272ME.SPC
[sigmove 15:05:32 DEBUG] transformed W272Mf.SPC -> W272MF.SPC
[Status 15:05:32 INFO] data for W272 transferred to science data processing
[Tidy 15:05:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:05:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:05:32 INFO] resetting WatchDogTimer
[Status 15:05:33 INFO] Starting Set [AERI set: name X272, 6 scans, 0 angle, D16300 command]
[Ingest 15:05:33 INFO] Sending XML status message
[Status 15:05:33 INFO] Mirror angle: 0
[Mirror 15:05:33 INFO] rotating to position X
[Status 15:05:33 INFO] .SET file for ACQ96 ready
[Ingest 15:05:34 INFO] Starting acquisition
[Status 15:05:34 INFO] reading housekeeping
[Status 15:05:51 INFO] acquire complete
[Status 15:05:52 INFO] writing housekeeping
[Sequencer 15:05:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:05:52 INFO] incremented X scene to 272 completed views
[Sequencer 15:05:52 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:05:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:05:52 INFO] incremented to [AERI set: name Y272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:05:52 INFO] X272.SIG(18)
[sigmove 15:05:52 DEBUG] transformed X272Ma.SPC -> X272MA.SPC
[sigmove 15:05:52 DEBUG] transformed X272Mb.SPC -> X272MB.SPC
[sigmove 15:05:52 DEBUG] transformed X272Mc.SPC -> X272MC.SPC
[sigmove 15:05:52 DEBUG] transformed X272Md.SPC -> X272MD.SPC
[sigmove 15:05:52 DEBUG] transformed X272Me.SPC -> X272ME.SPC
[sigmove 15:05:52 DEBUG] transformed X272Mf.SPC -> X272MF.SPC
[Status 15:05:52 INFO] data for X272 transferred to science data processing
[Tidy 15:05:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:05:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:05:52 INFO] resetting WatchDogTimer
[Status 15:05:53 INFO] Starting Set [AERI set: name Y272, 6 scans, 0 angle, D16300 command]
[Ingest 15:05:53 INFO] Sending XML status message
[Status 15:05:53 INFO] Mirror angle: 0
[Mirror 15:05:53 INFO] rotating to position Y
[Status 15:05:54 INFO] .SET file for ACQ96 ready
[Ingest 15:05:54 INFO] Starting acquisition
[Status 15:05:54 INFO] reading housekeeping
[Status 15:06:12 INFO] acquire complete
[Status 15:06:13 INFO] writing housekeeping
[Sequencer 15:06:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:06:13 INFO] incremented Y scene to 272 completed views
[Sequencer 15:06:13 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:06:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:06:13 INFO] incremented to [AERI set: name Z272, 6 scans, 0 angle, D16300 command] set
[sigmove 15:06:13 INFO] Y272.SIG(18)
[sigmove 15:06:13 DEBUG] transformed Y272Ma.SPC -> Y272MA.SPC
[sigmove 15:06:13 DEBUG] transformed Y272Mb.SPC -> Y272MB.SPC
[sigmove 15:06:13 DEBUG] transformed Y272Mc.SPC -> Y272MC.SPC
[sigmove 15:06:13 DEBUG] transformed Y272Md.SPC -> Y272MD.SPC
[sigmove 15:06:13 DEBUG] transformed Y272Me.SPC -> Y272ME.SPC
[sigmove 15:06:13 DEBUG] transformed Y272Mf.SPC -> Y272MF.SPC
[Status 15:06:13 INFO] data for Y272 transferred to science data processing
[Tidy 15:06:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:06:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:06:13 INFO] resetting WatchDogTimer
[Status 15:06:13 INFO] Starting Set [AERI set: name Z272, 6 scans, 0 angle, D16300 command]
[Ingest 15:06:13 INFO] Sending XML status message
[Status 15:06:13 INFO] Mirror angle: 0
[Mirror 15:06:13 INFO] rotating to position Z
[Status 15:06:14 INFO] .SET file for ACQ96 ready
[Ingest 15:06:14 INFO] Starting acquisition
[Status 15:06:14 INFO] reading housekeeping
[Status 15:06:32 INFO] acquire complete
[Status 15:06:33 INFO] writing housekeeping
[Sequencer 15:06:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:06:33 INFO] incremented Z scene to 272 completed views
[Sequencer 15:06:33 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:06:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:06:33 INFO] incremented to [AERI set: name H273, 6 scans, 60 angle, D22500 command] set
[sigmove 15:06:33 INFO] Z272.SIG(18)
[sigmove 15:06:33 DEBUG] transformed Z272Ma.SPC -> Z272MA.SPC
[sigmove 15:06:33 DEBUG] transformed Z272Mb.SPC -> Z272MB.SPC
[sigmove 15:06:33 DEBUG] transformed Z272Mc.SPC -> Z272MC.SPC
[sigmove 15:06:33 DEBUG] transformed Z272Md.SPC -> Z272MD.SPC
[sigmove 15:06:33 DEBUG] transformed Z272Me.SPC -> Z272ME.SPC
[sigmove 15:06:33 DEBUG] transformed Z272Mf.SPC -> Z272MF.SPC
[Status 15:06:33 INFO] data for Z272 transferred to science data processing
[Tidy 15:06:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:06:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:06:33 INFO] resetting WatchDogTimer
[Status 15:06:33 INFO] Starting Set [AERI set: name H273, 6 scans, 60 angle, D22500 command]
[Ingest 15:06:33 INFO] Sending XML status message
[Status 15:06:33 INFO] Mirror angle: 60
[Mirror 15:06:33 INFO] rotating to position H
[Status 15:06:34 INFO] .SET file for ACQ96 ready
[Ingest 15:06:35 INFO] Starting acquisition
[Status 15:06:35 INFO] reading housekeeping
[Status 15:06:53 INFO] acquire complete
[Status 15:06:54 INFO] writing housekeeping
[Sequencer 15:06:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:06:54 INFO] incremented H scene to 273 completed views
[Sequencer 15:06:54 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:06:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:06:54 INFO] incremented to [AERI set: name A273, 6 scans, 120 angle, D28300 command] set
[sigmove 15:06:54 INFO] H273.SIG(18)
[sigmove 15:06:54 DEBUG] transformed H273Ma.SPC -> H273MA.SPC
[sigmove 15:06:54 DEBUG] transformed H273Mb.SPC -> H273MB.SPC
[sigmove 15:06:54 DEBUG] transformed H273Mc.SPC -> H273MC.SPC
[sigmove 15:06:54 DEBUG] transformed H273Md.SPC -> H273MD.SPC
[sigmove 15:06:54 DEBUG] transformed H273Me.SPC -> H273ME.SPC
[sigmove 15:06:54 DEBUG] transformed H273Mf.SPC -> H273MF.SPC
[Status 15:06:54 INFO] data for H273 transferred to science data processing
[Tidy 15:06:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:06:54 INFO] A271.FIN(19),H271.FIN(19),S271.FIN(19),T271.FIN(19),U271.FIN(19),V271.FIN(19),W271.FIN(19),X271.FIN(19),Y271.FIN(19),Z271.FIN(19),A272.FIN(19),H272.FIN(19),S272.FIN(19),T272.FIN(19),U272.FIN(19),V272.FIN(19),W272.FIN(19),X272.FIN(19),Y272.FIN(19),Z272.FIN(19)
[sigmove 15:06:54 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:06:54 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:06:59 DEBUG] done zipping
[WatchDog 15:06:59 INFO] resetting WatchDogTimer
[Status 15:07:00 INFO] Starting Set [AERI set: name A273, 6 scans, 120 angle, D28300 command]
[Ingest 15:07:00 INFO] Sending XML status message
[Status 15:07:00 INFO] Mirror angle: 120
[Mirror 15:07:00 INFO] rotating to position A
[Status 15:07:01 INFO] .SET file for ACQ96 ready
[Ingest 15:07:01 INFO] Starting acquisition
[Status 15:07:02 INFO] reading housekeeping
[Status 15:07:19 INFO] acquire complete
[Status 15:07:20 INFO] writing housekeeping
[Sequencer 15:07:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:07:20 INFO] incremented A scene to 273 completed views
[Sequencer 15:07:20 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:07:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:07:20 INFO] incremented to [AERI set: name S273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:07:20 INFO] A273.SIG(18)
[sigmove 15:07:20 DEBUG] transformed A273Ma.SPC -> A273MA.SPC
[sigmove 15:07:20 DEBUG] transformed A273Mb.SPC -> A273MB.SPC
[sigmove 15:07:20 DEBUG] transformed A273Mc.SPC -> A273MC.SPC
[sigmove 15:07:20 DEBUG] transformed A273Md.SPC -> A273MD.SPC
[sigmove 15:07:20 DEBUG] transformed A273Me.SPC -> A273ME.SPC
[sigmove 15:07:20 DEBUG] transformed A273Mf.SPC -> A273MF.SPC
[Status 15:07:20 INFO] data for A273 transferred to science data processing
[Tidy 15:07:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:07:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:07:20 INFO] resetting WatchDogTimer
[Status 15:07:20 INFO] Starting Set [AERI set: name S273, 6 scans, 0 angle, D16300 command]
[Ingest 15:07:20 INFO] Sending XML status message
[Status 15:07:20 INFO] Mirror angle: 0
[Mirror 15:07:21 INFO] rotating to position S
[Status 15:07:22 INFO] .SET file for ACQ96 ready
[Ingest 15:07:22 INFO] Starting acquisition
[Status 15:07:23 INFO] reading housekeeping
[Status 15:07:40 INFO] acquire complete
[Status 15:07:41 INFO] writing housekeeping
[Sequencer 15:07:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:07:41 INFO] incremented S scene to 273 completed views
[Sequencer 15:07:41 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:07:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:07:41 INFO] incremented to [AERI set: name T273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:07:41 INFO] S273.SIG(18)
[sigmove 15:07:41 DEBUG] transformed S273Ma.SPC -> S273MA.SPC
[sigmove 15:07:41 DEBUG] transformed S273Mb.SPC -> S273MB.SPC
[sigmove 15:07:41 DEBUG] transformed S273Mc.SPC -> S273MC.SPC
[sigmove 15:07:41 DEBUG] transformed S273Md.SPC -> S273MD.SPC
[sigmove 15:07:41 DEBUG] transformed S273Me.SPC -> S273ME.SPC
[sigmove 15:07:41 DEBUG] transformed S273Mf.SPC -> S273MF.SPC
[Status 15:07:41 INFO] data for S273 transferred to science data processing
[Tidy 15:07:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:07:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:07:41 INFO] resetting WatchDogTimer
[Status 15:07:42 INFO] Starting Set [AERI set: name T273, 6 scans, 0 angle, D16300 command]
[Ingest 15:07:42 INFO] Sending XML status message
[Status 15:07:42 INFO] Mirror angle: 0
[Mirror 15:07:42 INFO] rotating to position T
[Status 15:07:42 INFO] .SET file for ACQ96 ready
[Ingest 15:07:43 INFO] Starting acquisition
[Status 15:07:43 INFO] reading housekeeping
[Status 15:08:02 INFO] acquire complete
[Status 15:08:02 INFO] writing housekeeping
[Sequencer 15:08:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:08:02 INFO] incremented T scene to 273 completed views
[Sequencer 15:08:02 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:08:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:08:02 INFO] incremented to [AERI set: name U273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:08:02 INFO] T273.SIG(18)
[sigmove 15:08:02 DEBUG] transformed T273Ma.SPC -> T273MA.SPC
[sigmove 15:08:02 DEBUG] transformed T273Mb.SPC -> T273MB.SPC
[sigmove 15:08:02 DEBUG] transformed T273Mc.SPC -> T273MC.SPC
[sigmove 15:08:02 DEBUG] transformed T273Md.SPC -> T273MD.SPC
[sigmove 15:08:02 DEBUG] transformed T273Me.SPC -> T273ME.SPC
[sigmove 15:08:02 DEBUG] transformed T273Mf.SPC -> T273MF.SPC
[Status 15:08:02 INFO] data for T273 transferred to science data processing
[Tidy 15:08:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:08:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:08:03 INFO] resetting WatchDogTimer
[Status 15:08:03 INFO] Starting Set [AERI set: name U273, 6 scans, 0 angle, D16300 command]
[Ingest 15:08:03 INFO] Sending XML status message
[Status 15:08:03 INFO] Mirror angle: 0
[Mirror 15:08:03 INFO] rotating to position U
[Status 15:08:04 INFO] .SET file for ACQ96 ready
[Ingest 15:08:04 INFO] Starting acquisition
[Status 15:08:05 INFO] reading housekeeping
[Status 15:08:23 INFO] acquire complete
[Status 15:08:24 INFO] writing housekeeping
[Sequencer 15:08:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:08:24 INFO] incremented U scene to 273 completed views
[Sequencer 15:08:24 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:08:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:08:24 INFO] incremented to [AERI set: name V273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:08:24 INFO] U273.SIG(18)
[sigmove 15:08:24 DEBUG] transformed U273Ma.SPC -> U273MA.SPC
[sigmove 15:08:24 DEBUG] transformed U273Mb.SPC -> U273MB.SPC
[sigmove 15:08:24 DEBUG] transformed U273Mc.SPC -> U273MC.SPC
[sigmove 15:08:24 DEBUG] transformed U273Md.SPC -> U273MD.SPC
[sigmove 15:08:24 DEBUG] transformed U273Me.SPC -> U273ME.SPC
[sigmove 15:08:24 DEBUG] transformed U273Mf.SPC -> U273MF.SPC
[Status 15:08:24 INFO] data for U273 transferred to science data processing
[Tidy 15:08:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:08:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:08:24 INFO] resetting WatchDogTimer
[Status 15:08:24 INFO] Starting Set [AERI set: name V273, 6 scans, 0 angle, D16300 command]
[Ingest 15:08:24 INFO] Sending XML status message
[Status 15:08:24 INFO] Mirror angle: 0
[Mirror 15:08:25 INFO] rotating to position V
[Status 15:08:25 INFO] .SET file for ACQ96 ready
[Ingest 15:08:25 INFO] Starting acquisition
[Status 15:08:26 INFO] reading housekeeping
[Status 15:08:43 INFO] acquire complete
[Status 15:08:44 INFO] writing housekeeping
[Sequencer 15:08:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:08:44 INFO] incremented V scene to 273 completed views
[Sequencer 15:08:44 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:08:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:08:44 INFO] incremented to [AERI set: name W273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:08:44 INFO] V273.SIG(18)
[sigmove 15:08:44 DEBUG] transformed V273Ma.SPC -> V273MA.SPC
[sigmove 15:08:44 DEBUG] transformed V273Mb.SPC -> V273MB.SPC
[sigmove 15:08:44 DEBUG] transformed V273Mc.SPC -> V273MC.SPC
[sigmove 15:08:44 DEBUG] transformed V273Md.SPC -> V273MD.SPC
[sigmove 15:08:44 DEBUG] transformed V273Me.SPC -> V273ME.SPC
[sigmove 15:08:44 DEBUG] transformed V273Mf.SPC -> V273MF.SPC
[Status 15:08:44 INFO] data for V273 transferred to science data processing
[Tidy 15:08:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:08:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:08:44 INFO] resetting WatchDogTimer
[Status 15:08:44 INFO] Starting Set [AERI set: name W273, 6 scans, 0 angle, D16300 command]
[Ingest 15:08:44 INFO] Sending XML status message
[Status 15:08:44 INFO] Mirror angle: 0
[Mirror 15:08:45 INFO] rotating to position W
[Status 15:08:45 INFO] .SET file for ACQ96 ready
[Ingest 15:08:45 INFO] Starting acquisition
[Status 15:08:46 INFO] reading housekeeping
[Status 15:09:03 INFO] acquire complete
[Status 15:09:04 INFO] writing housekeeping
[Sequencer 15:09:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:09:04 INFO] incremented W scene to 273 completed views
[Sequencer 15:09:04 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:09:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:09:04 INFO] incremented to [AERI set: name X273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:09:04 INFO] W273.SIG(18)
[sigmove 15:09:04 DEBUG] transformed W273Ma.SPC -> W273MA.SPC
[sigmove 15:09:04 DEBUG] transformed W273Mb.SPC -> W273MB.SPC
[sigmove 15:09:04 DEBUG] transformed W273Mc.SPC -> W273MC.SPC
[sigmove 15:09:04 DEBUG] transformed W273Md.SPC -> W273MD.SPC
[sigmove 15:09:04 DEBUG] transformed W273Me.SPC -> W273ME.SPC
[sigmove 15:09:04 DEBUG] transformed W273Mf.SPC -> W273MF.SPC
[Status 15:09:04 INFO] data for W273 transferred to science data processing
[Tidy 15:09:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:09:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:09:04 INFO] resetting WatchDogTimer
[Status 15:09:05 INFO] Starting Set [AERI set: name X273, 6 scans, 0 angle, D16300 command]
[Ingest 15:09:05 INFO] Sending XML status message
[Status 15:09:05 INFO] Mirror angle: 0
[Mirror 15:09:05 INFO] rotating to position X
[Status 15:09:05 INFO] .SET file for ACQ96 ready
[Ingest 15:09:06 INFO] Starting acquisition
[Status 15:09:06 INFO] reading housekeeping
[Status 15:09:23 INFO] acquire complete
[Status 15:09:24 INFO] writing housekeeping
[Sequencer 15:09:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:09:24 INFO] incremented X scene to 273 completed views
[Sequencer 15:09:24 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:09:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:09:24 INFO] incremented to [AERI set: name Y273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:09:24 INFO] X273.SIG(18)
[sigmove 15:09:24 DEBUG] transformed X273Ma.SPC -> X273MA.SPC
[sigmove 15:09:24 DEBUG] transformed X273Mb.SPC -> X273MB.SPC
[sigmove 15:09:24 DEBUG] transformed X273Mc.SPC -> X273MC.SPC
[sigmove 15:09:24 DEBUG] transformed X273Md.SPC -> X273MD.SPC
[sigmove 15:09:24 DEBUG] transformed X273Me.SPC -> X273ME.SPC
[sigmove 15:09:24 DEBUG] transformed X273Mf.SPC -> X273MF.SPC
[Status 15:09:24 INFO] data for X273 transferred to science data processing
[Tidy 15:09:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:09:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:09:24 INFO] resetting WatchDogTimer
[Status 15:09:25 INFO] Starting Set [AERI set: name Y273, 6 scans, 0 angle, D16300 command]
[Ingest 15:09:25 INFO] Sending XML status message
[Status 15:09:25 INFO] Mirror angle: 0
[Mirror 15:09:25 INFO] rotating to position Y
[Status 15:09:26 INFO] .SET file for ACQ96 ready
[Ingest 15:09:26 INFO] Starting acquisition
[Status 15:09:26 INFO] reading housekeeping
[Status 15:09:44 INFO] acquire complete
[Status 15:09:45 INFO] writing housekeeping
[Sequencer 15:09:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:09:45 INFO] incremented Y scene to 273 completed views
[Sequencer 15:09:45 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:09:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:09:45 INFO] incremented to [AERI set: name Z273, 6 scans, 0 angle, D16300 command] set
[sigmove 15:09:45 INFO] Y273.SIG(18)
[sigmove 15:09:45 DEBUG] transformed Y273Ma.SPC -> Y273MA.SPC
[sigmove 15:09:45 DEBUG] transformed Y273Mb.SPC -> Y273MB.SPC
[sigmove 15:09:45 DEBUG] transformed Y273Mc.SPC -> Y273MC.SPC
[sigmove 15:09:45 DEBUG] transformed Y273Md.SPC -> Y273MD.SPC
[sigmove 15:09:45 DEBUG] transformed Y273Me.SPC -> Y273ME.SPC
[sigmove 15:09:45 DEBUG] transformed Y273Mf.SPC -> Y273MF.SPC
[Status 15:09:45 INFO] data for Y273 transferred to science data processing
[Tidy 15:09:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:09:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:09:45 INFO] resetting WatchDogTimer
[Status 15:09:45 INFO] Starting Set [AERI set: name Z273, 6 scans, 0 angle, D16300 command]
[Ingest 15:09:45 INFO] Sending XML status message
[Status 15:09:45 INFO] Mirror angle: 0
[Mirror 15:09:45 INFO] rotating to position Z
[Status 15:09:46 INFO] .SET file for ACQ96 ready
[Ingest 15:09:46 INFO] Starting acquisition
[Status 15:09:46 INFO] reading housekeeping
[Status 15:10:04 INFO] acquire complete
[Status 15:10:05 INFO] writing housekeeping
[Sequencer 15:10:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:10:05 INFO] incremented Z scene to 273 completed views
[Sequencer 15:10:05 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:10:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:10:05 INFO] incremented to [AERI set: name A274, 6 scans, 120 angle, D28300 command] set
[sigmove 15:10:05 INFO] Z273.SIG(18)
[sigmove 15:10:05 DEBUG] transformed Z273Ma.SPC -> Z273MA.SPC
[sigmove 15:10:05 DEBUG] transformed Z273Mb.SPC -> Z273MB.SPC
[sigmove 15:10:05 DEBUG] transformed Z273Mc.SPC -> Z273MC.SPC
[sigmove 15:10:05 DEBUG] transformed Z273Md.SPC -> Z273MD.SPC
[sigmove 15:10:05 DEBUG] transformed Z273Me.SPC -> Z273ME.SPC
[sigmove 15:10:05 DEBUG] transformed Z273Mf.SPC -> Z273MF.SPC
[Status 15:10:05 INFO] data for Z273 transferred to science data processing
[Tidy 15:10:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:10:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:10:05 INFO] resetting WatchDogTimer
[Status 15:10:05 INFO] Starting Set [AERI set: name A274, 6 scans, 120 angle, D28300 command]
[Ingest 15:10:05 INFO] Sending XML status message
[Status 15:10:05 INFO] Mirror angle: 120
[Mirror 15:10:05 INFO] rotating to position A
[Status 15:10:07 INFO] .SET file for ACQ96 ready
[Ingest 15:10:07 INFO] Starting acquisition
[Status 15:10:08 INFO] reading housekeeping
[Status 15:10:25 INFO] acquire complete
[Status 15:10:26 INFO] writing housekeeping
[Sequencer 15:10:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:10:26 INFO] incremented A scene to 274 completed views
[Sequencer 15:10:26 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:10:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:10:26 INFO] incremented to [AERI set: name H274, 6 scans, 60 angle, D22500 command] set
[sigmove 15:10:26 INFO] A274.SIG(18)
[sigmove 15:10:26 DEBUG] transformed A274Ma.SPC -> A274MA.SPC
[sigmove 15:10:26 DEBUG] transformed A274Mb.SPC -> A274MB.SPC
[sigmove 15:10:26 DEBUG] transformed A274Mc.SPC -> A274MC.SPC
[sigmove 15:10:26 DEBUG] transformed A274Md.SPC -> A274MD.SPC
[sigmove 15:10:26 DEBUG] transformed A274Me.SPC -> A274ME.SPC
[sigmove 15:10:26 DEBUG] transformed A274Mf.SPC -> A274MF.SPC
[Status 15:10:26 INFO] data for A274 transferred to science data processing
[Tidy 15:10:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:10:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:10:26 INFO] resetting WatchDogTimer
[Status 15:10:26 INFO] Starting Set [AERI set: name H274, 6 scans, 60 angle, D22500 command]
[Ingest 15:10:26 INFO] Sending XML status message
[Status 15:10:26 INFO] Mirror angle: 60
[Mirror 15:10:27 INFO] rotating to position H
[Status 15:10:28 INFO] .SET file for ACQ96 ready
[Ingest 15:10:28 INFO] Starting acquisition
[Status 15:10:28 INFO] reading housekeeping
[Status 15:10:46 INFO] acquire complete
[Status 15:10:47 INFO] writing housekeeping
[Sequencer 15:10:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:10:47 INFO] incremented H scene to 274 completed views
[Sequencer 15:10:47 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:10:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:10:47 INFO] incremented to [AERI set: name S274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:10:47 INFO] H274.SIG(18)
[sigmove 15:10:47 DEBUG] transformed H274Ma.SPC -> H274MA.SPC
[sigmove 15:10:47 DEBUG] transformed H274Mb.SPC -> H274MB.SPC
[sigmove 15:10:47 DEBUG] transformed H274Mc.SPC -> H274MC.SPC
[sigmove 15:10:47 DEBUG] transformed H274Md.SPC -> H274MD.SPC
[sigmove 15:10:47 DEBUG] transformed H274Me.SPC -> H274ME.SPC
[sigmove 15:10:47 DEBUG] transformed H274Mf.SPC -> H274MF.SPC
[Status 15:10:47 INFO] data for H274 transferred to science data processing
[Tidy 15:10:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:10:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:10:47 INFO] resetting WatchDogTimer
[Status 15:10:48 INFO] Starting Set [AERI set: name S274, 6 scans, 0 angle, D16300 command]
[Ingest 15:10:48 INFO] Sending XML status message
[Status 15:10:48 INFO] Mirror angle: 0
[Mirror 15:10:48 INFO] rotating to position S
[Status 15:10:49 INFO] .SET file for ACQ96 ready
[Ingest 15:10:49 INFO] Starting acquisition
[Status 15:10:50 INFO] reading housekeeping
[Status 15:11:08 INFO] acquire complete
[Status 15:11:09 INFO] writing housekeeping
[Sequencer 15:11:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:11:09 INFO] incremented S scene to 274 completed views
[Sequencer 15:11:09 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:11:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:11:09 INFO] incremented to [AERI set: name T274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:11:09 INFO] S274.SIG(18)
[sigmove 15:11:09 DEBUG] transformed S274Ma.SPC -> S274MA.SPC
[sigmove 15:11:09 DEBUG] transformed S274Mb.SPC -> S274MB.SPC
[sigmove 15:11:09 DEBUG] transformed S274Mc.SPC -> S274MC.SPC
[sigmove 15:11:09 DEBUG] transformed S274Md.SPC -> S274MD.SPC
[sigmove 15:11:09 DEBUG] transformed S274Me.SPC -> S274ME.SPC
[sigmove 15:11:09 DEBUG] transformed S274Mf.SPC -> S274MF.SPC
[Status 15:11:09 INFO] data for S274 transferred to science data processing
[Tidy 15:11:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:11:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:11:09 INFO] resetting WatchDogTimer
[Status 15:11:09 INFO] Starting Set [AERI set: name T274, 6 scans, 0 angle, D16300 command]
[Ingest 15:11:09 INFO] Sending XML status message
[Status 15:11:09 INFO] Mirror angle: 0
[Mirror 15:11:10 INFO] rotating to position T
[Status 15:11:10 INFO] .SET file for ACQ96 ready
[Ingest 15:11:10 INFO] Starting acquisition
[Status 15:11:11 INFO] reading housekeeping
[Status 15:11:28 INFO] acquire complete
[Status 15:11:29 INFO] writing housekeeping
[Sequencer 15:11:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:11:29 INFO] incremented T scene to 274 completed views
[Sequencer 15:11:29 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:11:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:11:29 INFO] incremented to [AERI set: name U274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:11:29 INFO] T274.SIG(18)
[sigmove 15:11:29 DEBUG] transformed T274Ma.SPC -> T274MA.SPC
[sigmove 15:11:29 DEBUG] transformed T274Mb.SPC -> T274MB.SPC
[sigmove 15:11:29 DEBUG] transformed T274Mc.SPC -> T274MC.SPC
[sigmove 15:11:29 DEBUG] transformed T274Md.SPC -> T274MD.SPC
[sigmove 15:11:29 DEBUG] transformed T274Me.SPC -> T274ME.SPC
[sigmove 15:11:29 DEBUG] transformed T274Mf.SPC -> T274MF.SPC
[Status 15:11:29 INFO] data for T274 transferred to science data processing
[Tidy 15:11:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:11:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:11:29 INFO] resetting WatchDogTimer
[Status 15:11:29 INFO] Starting Set [AERI set: name U274, 6 scans, 0 angle, D16300 command]
[Ingest 15:11:29 INFO] Sending XML status message
[Status 15:11:29 INFO] Mirror angle: 0
[Mirror 15:11:30 INFO] rotating to position U
[Status 15:11:30 INFO] .SET file for ACQ96 ready
[Ingest 15:11:30 INFO] Starting acquisition
[Status 15:11:31 INFO] reading housekeeping
[Status 15:11:48 INFO] acquire complete
[Status 15:11:49 INFO] writing housekeeping
[Sequencer 15:11:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:11:49 INFO] incremented U scene to 274 completed views
[Sequencer 15:11:49 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:11:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:11:49 INFO] incremented to [AERI set: name V274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:11:49 INFO] U274.SIG(18)
[sigmove 15:11:49 DEBUG] transformed U274Ma.SPC -> U274MA.SPC
[sigmove 15:11:49 DEBUG] transformed U274Mb.SPC -> U274MB.SPC
[sigmove 15:11:49 DEBUG] transformed U274Mc.SPC -> U274MC.SPC
[sigmove 15:11:49 DEBUG] transformed U274Md.SPC -> U274MD.SPC
[sigmove 15:11:49 DEBUG] transformed U274Me.SPC -> U274ME.SPC
[sigmove 15:11:49 DEBUG] transformed U274Mf.SPC -> U274MF.SPC
[Status 15:11:49 INFO] data for U274 transferred to science data processing
[Tidy 15:11:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:11:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:11:49 INFO] resetting WatchDogTimer
[Status 15:11:50 INFO] Starting Set [AERI set: name V274, 6 scans, 0 angle, D16300 command]
[Ingest 15:11:50 INFO] Sending XML status message
[Status 15:11:50 INFO] Mirror angle: 0
[Mirror 15:11:50 INFO] rotating to position V
[Status 15:11:51 INFO] .SET file for ACQ96 ready
[Ingest 15:11:51 INFO] Starting acquisition
[Status 15:11:51 INFO] reading housekeeping
[Status 15:12:09 INFO] acquire complete
[Status 15:12:10 INFO] writing housekeeping
[Sequencer 15:12:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:12:10 INFO] incremented V scene to 274 completed views
[Sequencer 15:12:10 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:12:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:12:10 INFO] incremented to [AERI set: name W274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:12:10 INFO] V274.SIG(18)
[sigmove 15:12:10 DEBUG] transformed V274Ma.SPC -> V274MA.SPC
[sigmove 15:12:10 DEBUG] transformed V274Mb.SPC -> V274MB.SPC
[sigmove 15:12:10 DEBUG] transformed V274Mc.SPC -> V274MC.SPC
[sigmove 15:12:10 DEBUG] transformed V274Md.SPC -> V274MD.SPC
[sigmove 15:12:10 DEBUG] transformed V274Me.SPC -> V274ME.SPC
[sigmove 15:12:10 DEBUG] transformed V274Mf.SPC -> V274MF.SPC
[Status 15:12:10 INFO] data for V274 transferred to science data processing
[Tidy 15:12:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:12:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:12:10 INFO] resetting WatchDogTimer
[Status 15:12:11 INFO] Starting Set [AERI set: name W274, 6 scans, 0 angle, D16300 command]
[Ingest 15:12:11 INFO] Sending XML status message
[Status 15:12:11 INFO] Mirror angle: 0
[Mirror 15:12:11 INFO] rotating to position W
[Status 15:12:12 INFO] .SET file for ACQ96 ready
[Ingest 15:12:12 INFO] Starting acquisition
[Status 15:12:12 INFO] reading housekeeping
[Status 15:12:30 INFO] acquire complete
[Status 15:12:31 INFO] writing housekeeping
[Sequencer 15:12:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:12:31 INFO] incremented W scene to 274 completed views
[Sequencer 15:12:31 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:12:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:12:31 INFO] incremented to [AERI set: name X274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:12:31 INFO] W274.SIG(18)
[sigmove 15:12:31 DEBUG] transformed W274Ma.SPC -> W274MA.SPC
[sigmove 15:12:31 DEBUG] transformed W274Mb.SPC -> W274MB.SPC
[sigmove 15:12:31 DEBUG] transformed W274Mc.SPC -> W274MC.SPC
[sigmove 15:12:31 DEBUG] transformed W274Md.SPC -> W274MD.SPC
[sigmove 15:12:31 DEBUG] transformed W274Me.SPC -> W274ME.SPC
[sigmove 15:12:31 DEBUG] transformed W274Mf.SPC -> W274MF.SPC
[Status 15:12:31 INFO] data for W274 transferred to science data processing
[Tidy 15:12:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:12:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:12:31 INFO] resetting WatchDogTimer
[Status 15:12:31 INFO] Starting Set [AERI set: name X274, 6 scans, 0 angle, D16300 command]
[Ingest 15:12:31 INFO] Sending XML status message
[Status 15:12:31 INFO] Mirror angle: 0
[Mirror 15:12:31 INFO] rotating to position X
[Status 15:12:32 INFO] .SET file for ACQ96 ready
[Ingest 15:12:32 INFO] Starting acquisition
[Status 15:12:32 INFO] reading housekeeping
[Status 15:12:50 INFO] acquire complete
[Status 15:12:51 INFO] writing housekeeping
[Sequencer 15:12:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:12:51 INFO] incremented X scene to 274 completed views
[Sequencer 15:12:51 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:12:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:12:51 INFO] incremented to [AERI set: name Y274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:12:51 INFO] X274.SIG(18)
[sigmove 15:12:51 DEBUG] transformed X274Ma.SPC -> X274MA.SPC
[sigmove 15:12:51 DEBUG] transformed X274Mb.SPC -> X274MB.SPC
[sigmove 15:12:51 DEBUG] transformed X274Mc.SPC -> X274MC.SPC
[sigmove 15:12:51 DEBUG] transformed X274Md.SPC -> X274MD.SPC
[sigmove 15:12:51 DEBUG] transformed X274Me.SPC -> X274ME.SPC
[sigmove 15:12:51 DEBUG] transformed X274Mf.SPC -> X274MF.SPC
[Status 15:12:51 INFO] data for X274 transferred to science data processing
[Tidy 15:12:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:12:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:12:51 INFO] resetting WatchDogTimer
[Status 15:12:51 INFO] Starting Set [AERI set: name Y274, 6 scans, 0 angle, D16300 command]
[Ingest 15:12:51 INFO] Sending XML status message
[Status 15:12:51 INFO] Mirror angle: 0
[Mirror 15:12:52 INFO] rotating to position Y
[Status 15:12:52 INFO] .SET file for ACQ96 ready
[Ingest 15:12:52 INFO] Starting acquisition
[Status 15:12:53 INFO] reading housekeeping
[Status 15:13:10 INFO] acquire complete
[Status 15:13:11 INFO] writing housekeeping
[Sequencer 15:13:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:13:11 INFO] incremented Y scene to 274 completed views
[Sequencer 15:13:11 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:13:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:13:11 INFO] incremented to [AERI set: name Z274, 6 scans, 0 angle, D16300 command] set
[sigmove 15:13:11 INFO] Y274.SIG(18)
[sigmove 15:13:11 DEBUG] transformed Y274Ma.SPC -> Y274MA.SPC
[sigmove 15:13:11 DEBUG] transformed Y274Mb.SPC -> Y274MB.SPC
[sigmove 15:13:11 DEBUG] transformed Y274Mc.SPC -> Y274MC.SPC
[sigmove 15:13:11 DEBUG] transformed Y274Md.SPC -> Y274MD.SPC
[sigmove 15:13:11 DEBUG] transformed Y274Me.SPC -> Y274ME.SPC
[sigmove 15:13:11 DEBUG] transformed Y274Mf.SPC -> Y274MF.SPC
[Status 15:13:11 INFO] data for Y274 transferred to science data processing
[Tidy 15:13:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:13:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:13:11 INFO] resetting WatchDogTimer
[Status 15:13:11 INFO] Starting Set [AERI set: name Z274, 6 scans, 0 angle, D16300 command]
[Ingest 15:13:11 INFO] Sending XML status message
[Status 15:13:11 INFO] Mirror angle: 0
[Mirror 15:13:12 INFO] rotating to position Z
[Status 15:13:12 INFO] .SET file for ACQ96 ready
[Ingest 15:13:13 INFO] Starting acquisition
[Status 15:13:13 INFO] reading housekeeping
[Status 15:13:30 INFO] acquire complete
[Status 15:13:31 INFO] writing housekeeping
[Sequencer 15:13:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:13:31 INFO] incremented Z scene to 274 completed views
[Sequencer 15:13:31 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:13:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:13:31 INFO] incremented to [AERI set: name H275, 6 scans, 60 angle, D22500 command] set
[sigmove 15:13:31 INFO] Z274.SIG(18)
[sigmove 15:13:31 DEBUG] transformed Z274Ma.SPC -> Z274MA.SPC
[sigmove 15:13:31 DEBUG] transformed Z274Mb.SPC -> Z274MB.SPC
[sigmove 15:13:31 DEBUG] transformed Z274Mc.SPC -> Z274MC.SPC
[sigmove 15:13:31 DEBUG] transformed Z274Md.SPC -> Z274MD.SPC
[sigmove 15:13:31 DEBUG] transformed Z274Me.SPC -> Z274ME.SPC
[sigmove 15:13:31 DEBUG] transformed Z274Mf.SPC -> Z274MF.SPC
[Status 15:13:31 INFO] data for Z274 transferred to science data processing
[Tidy 15:13:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:13:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:13:31 INFO] resetting WatchDogTimer
[Status 15:13:32 INFO] Starting Set [AERI set: name H275, 6 scans, 60 angle, D22500 command]
[Ingest 15:13:32 INFO] Sending XML status message
[Status 15:13:32 INFO] Mirror angle: 60
[Mirror 15:13:32 INFO] rotating to position H
[Status 15:13:33 INFO] .SET file for ACQ96 ready
[Ingest 15:13:33 INFO] Starting acquisition
[Status 15:13:34 INFO] reading housekeeping
[Status 15:13:52 INFO] acquire complete
[Status 15:13:53 INFO] writing housekeeping
[Sequencer 15:13:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:13:53 INFO] incremented H scene to 275 completed views
[Sequencer 15:13:53 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:13:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:13:53 INFO] incremented to [AERI set: name A275, 6 scans, 120 angle, D28300 command] set
[sigmove 15:13:53 INFO] H275.SIG(18)
[sigmove 15:13:53 DEBUG] transformed H275Ma.SPC -> H275MA.SPC
[sigmove 15:13:53 DEBUG] transformed H275Mb.SPC -> H275MB.SPC
[sigmove 15:13:53 DEBUG] transformed H275Mc.SPC -> H275MC.SPC
[sigmove 15:13:53 DEBUG] transformed H275Md.SPC -> H275MD.SPC
[sigmove 15:13:53 DEBUG] transformed H275Me.SPC -> H275ME.SPC
[sigmove 15:13:53 DEBUG] transformed H275Mf.SPC -> H275MF.SPC
[Status 15:13:53 INFO] data for H275 transferred to science data processing
[Tidy 15:13:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:13:53 INFO] A273.FIN(19),H273.FIN(19),S273.FIN(19),T273.FIN(19),U273.FIN(19),V273.FIN(19),W273.FIN(19),X273.FIN(19),Y273.FIN(19),Z273.FIN(19),A274.FIN(19),H274.FIN(19),S274.FIN(19),T274.FIN(19),U274.FIN(19),V274.FIN(19),W274.FIN(19),X274.FIN(19),Y274.FIN(19),Z274.FIN(19)
[sigmove 15:13:53 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:13:53 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:13:57 DEBUG] done zipping
[WatchDog 15:13:58 INFO] resetting WatchDogTimer
[Status 15:13:58 INFO] Starting Set [AERI set: name A275, 6 scans, 120 angle, D28300 command]
[Ingest 15:13:58 INFO] Sending XML status message
[Status 15:13:58 INFO] Mirror angle: 120
[Mirror 15:13:59 INFO] rotating to position A
[Status 15:14:00 INFO] .SET file for ACQ96 ready
[Ingest 15:14:00 INFO] Starting acquisition
[Status 15:14:00 INFO] reading housekeeping
[Status 15:14:19 INFO] acquire complete
[Status 15:14:19 INFO] writing housekeeping
[Sequencer 15:14:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:14:19 INFO] incremented A scene to 275 completed views
[Sequencer 15:14:19 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:14:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:14:19 INFO] incremented to [AERI set: name S275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:14:19 INFO] A275.SIG(18)
[sigmove 15:14:19 DEBUG] transformed A275Ma.SPC -> A275MA.SPC
[sigmove 15:14:19 DEBUG] transformed A275Mb.SPC -> A275MB.SPC
[sigmove 15:14:19 DEBUG] transformed A275Mc.SPC -> A275MC.SPC
[sigmove 15:14:19 DEBUG] transformed A275Md.SPC -> A275MD.SPC
[sigmove 15:14:19 DEBUG] transformed A275Me.SPC -> A275ME.SPC
[sigmove 15:14:19 DEBUG] transformed A275Mf.SPC -> A275MF.SPC
[Status 15:14:19 INFO] data for A275 transferred to science data processing
[Tidy 15:14:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:14:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:14:19 INFO] resetting WatchDogTimer
[Status 15:14:20 INFO] Starting Set [AERI set: name S275, 6 scans, 0 angle, D16300 command]
[Ingest 15:14:20 INFO] Sending XML status message
[Status 15:14:20 INFO] Mirror angle: 0
[Mirror 15:14:20 INFO] rotating to position S
[Status 15:14:22 INFO] .SET file for ACQ96 ready
[Ingest 15:14:22 INFO] Starting acquisition
[Status 15:14:22 INFO] reading housekeeping
[Status 15:14:40 INFO] acquire complete
[Status 15:14:41 INFO] writing housekeeping
[Sequencer 15:14:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:14:41 INFO] incremented S scene to 275 completed views
[Sequencer 15:14:41 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:14:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:14:41 INFO] incremented to [AERI set: name T275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:14:41 INFO] S275.SIG(18)
[sigmove 15:14:41 DEBUG] transformed S275Ma.SPC -> S275MA.SPC
[sigmove 15:14:41 DEBUG] transformed S275Mb.SPC -> S275MB.SPC
[sigmove 15:14:41 DEBUG] transformed S275Mc.SPC -> S275MC.SPC
[sigmove 15:14:41 DEBUG] transformed S275Md.SPC -> S275MD.SPC
[sigmove 15:14:41 DEBUG] transformed S275Me.SPC -> S275ME.SPC
[sigmove 15:14:41 DEBUG] transformed S275Mf.SPC -> S275MF.SPC
[Status 15:14:41 INFO] data for S275 transferred to science data processing
[Tidy 15:14:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:14:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:14:41 INFO] resetting WatchDogTimer
[Status 15:14:41 INFO] Starting Set [AERI set: name T275, 6 scans, 0 angle, D16300 command]
[Ingest 15:14:41 INFO] Sending XML status message
[Status 15:14:41 INFO] Mirror angle: 0
[Mirror 15:14:42 INFO] rotating to position T
[Status 15:14:42 INFO] .SET file for ACQ96 ready
[Ingest 15:14:42 INFO] Starting acquisition
[Status 15:14:43 INFO] reading housekeeping
[Status 15:15:00 INFO] acquire complete
[Status 15:15:01 INFO] writing housekeeping
[Sequencer 15:15:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:15:01 INFO] incremented T scene to 275 completed views
[Sequencer 15:15:01 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:15:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:15:01 INFO] incremented to [AERI set: name U275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:15:01 INFO] T275.SIG(18)
[sigmove 15:15:01 DEBUG] transformed T275Ma.SPC -> T275MA.SPC
[sigmove 15:15:01 DEBUG] transformed T275Mb.SPC -> T275MB.SPC
[sigmove 15:15:01 DEBUG] transformed T275Mc.SPC -> T275MC.SPC
[sigmove 15:15:01 DEBUG] transformed T275Md.SPC -> T275MD.SPC
[sigmove 15:15:01 DEBUG] transformed T275Me.SPC -> T275ME.SPC
[sigmove 15:15:01 DEBUG] transformed T275Mf.SPC -> T275MF.SPC
[Status 15:15:01 INFO] data for T275 transferred to science data processing
[Tidy 15:15:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:15:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:15:01 INFO] resetting WatchDogTimer
[Status 15:15:01 INFO] Starting Set [AERI set: name U275, 6 scans, 0 angle, D16300 command]
[Ingest 15:15:01 INFO] Sending XML status message
[Status 15:15:01 INFO] Mirror angle: 0
[Mirror 15:15:02 INFO] rotating to position U
[Status 15:15:02 INFO] .SET file for ACQ96 ready
[Ingest 15:15:02 INFO] Starting acquisition
[Status 15:15:03 INFO] reading housekeeping
[Status 15:15:20 INFO] acquire complete
[Status 15:15:22 INFO] writing housekeeping
[Sequencer 15:15:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:15:22 INFO] incremented U scene to 275 completed views
[Sequencer 15:15:22 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:15:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:15:22 INFO] incremented to [AERI set: name V275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:15:22 INFO] U275.SIG(18)
[sigmove 15:15:22 DEBUG] transformed U275Ma.SPC -> U275MA.SPC
[sigmove 15:15:22 DEBUG] transformed U275Mb.SPC -> U275MB.SPC
[sigmove 15:15:22 DEBUG] transformed U275Mc.SPC -> U275MC.SPC
[sigmove 15:15:22 DEBUG] transformed U275Md.SPC -> U275MD.SPC
[sigmove 15:15:22 DEBUG] transformed U275Me.SPC -> U275ME.SPC
[sigmove 15:15:22 DEBUG] transformed U275Mf.SPC -> U275MF.SPC
[Status 15:15:22 INFO] data for U275 transferred to science data processing
[Tidy 15:15:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:15:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:15:22 INFO] resetting WatchDogTimer
[Status 15:15:23 INFO] Starting Set [AERI set: name V275, 6 scans, 0 angle, D16300 command]
[Ingest 15:15:23 INFO] Sending XML status message
[Status 15:15:23 INFO] Mirror angle: 0
[Mirror 15:15:23 INFO] rotating to position V
[Status 15:15:24 INFO] .SET file for ACQ96 ready
[Ingest 15:15:24 INFO] Starting acquisition
[Status 15:15:24 INFO] reading housekeeping
[Status 15:15:42 INFO] acquire complete
[Status 15:15:42 INFO] writing housekeeping
[Sequencer 15:15:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:15:42 INFO] incremented V scene to 275 completed views
[Sequencer 15:15:42 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:15:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:15:42 INFO] incremented to [AERI set: name W275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:15:42 INFO] V275.SIG(18)
[sigmove 15:15:42 DEBUG] transformed V275Ma.SPC -> V275MA.SPC
[sigmove 15:15:42 DEBUG] transformed V275Mb.SPC -> V275MB.SPC
[sigmove 15:15:42 DEBUG] transformed V275Mc.SPC -> V275MC.SPC
[sigmove 15:15:42 DEBUG] transformed V275Md.SPC -> V275MD.SPC
[sigmove 15:15:42 DEBUG] transformed V275Me.SPC -> V275ME.SPC
[sigmove 15:15:42 DEBUG] transformed V275Mf.SPC -> V275MF.SPC
[Status 15:15:42 INFO] data for V275 transferred to science data processing
[Tidy 15:15:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:15:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:15:43 INFO] resetting WatchDogTimer
[Status 15:15:43 INFO] Starting Set [AERI set: name W275, 6 scans, 0 angle, D16300 command]
[Ingest 15:15:43 INFO] Sending XML status message
[Status 15:15:43 INFO] Mirror angle: 0
[Mirror 15:15:43 INFO] rotating to position W
[Status 15:15:44 INFO] .SET file for ACQ96 ready
[Ingest 15:15:44 INFO] Starting acquisition
[Status 15:15:44 INFO] reading housekeeping
[Status 15:16:02 INFO] acquire complete
[Status 15:16:03 INFO] writing housekeeping
[Sequencer 15:16:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:16:03 INFO] incremented W scene to 275 completed views
[Sequencer 15:16:03 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:16:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:16:03 INFO] incremented to [AERI set: name X275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:16:03 INFO] W275.SIG(18)
[sigmove 15:16:03 DEBUG] transformed W275Ma.SPC -> W275MA.SPC
[sigmove 15:16:03 DEBUG] transformed W275Mb.SPC -> W275MB.SPC
[sigmove 15:16:03 DEBUG] transformed W275Mc.SPC -> W275MC.SPC
[sigmove 15:16:03 DEBUG] transformed W275Md.SPC -> W275MD.SPC
[sigmove 15:16:03 DEBUG] transformed W275Me.SPC -> W275ME.SPC
[sigmove 15:16:03 DEBUG] transformed W275Mf.SPC -> W275MF.SPC
[Status 15:16:03 INFO] data for W275 transferred to science data processing
[Tidy 15:16:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:16:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:16:03 INFO] resetting WatchDogTimer
[Status 15:16:03 INFO] Starting Set [AERI set: name X275, 6 scans, 0 angle, D16300 command]
[Ingest 15:16:03 INFO] Sending XML status message
[Status 15:16:03 INFO] Mirror angle: 0
[Mirror 15:16:03 INFO] rotating to position X
[Status 15:16:04 INFO] .SET file for ACQ96 ready
[Ingest 15:16:04 INFO] Starting acquisition
[Status 15:16:05 INFO] reading housekeeping
[Status 15:16:23 INFO] acquire complete
[Status 15:16:24 INFO] writing housekeeping
[Sequencer 15:16:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:16:24 INFO] incremented X scene to 275 completed views
[Sequencer 15:16:24 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:16:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:16:24 INFO] incremented to [AERI set: name Y275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:16:24 INFO] X275.SIG(18)
[sigmove 15:16:24 DEBUG] transformed X275Ma.SPC -> X275MA.SPC
[sigmove 15:16:24 DEBUG] transformed X275Mb.SPC -> X275MB.SPC
[sigmove 15:16:24 DEBUG] transformed X275Mc.SPC -> X275MC.SPC
[sigmove 15:16:24 DEBUG] transformed X275Md.SPC -> X275MD.SPC
[sigmove 15:16:24 DEBUG] transformed X275Me.SPC -> X275ME.SPC
[sigmove 15:16:24 DEBUG] transformed X275Mf.SPC -> X275MF.SPC
[Status 15:16:24 INFO] data for X275 transferred to science data processing
[Tidy 15:16:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:16:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:16:24 INFO] resetting WatchDogTimer
[Status 15:16:24 INFO] Starting Set [AERI set: name Y275, 6 scans, 0 angle, D16300 command]
[Ingest 15:16:24 INFO] Sending XML status message
[Status 15:16:24 INFO] Mirror angle: 0
[Mirror 15:16:25 INFO] rotating to position Y
[Status 15:16:25 INFO] .SET file for ACQ96 ready
[Ingest 15:16:26 INFO] Starting acquisition
[Status 15:16:26 INFO] reading housekeeping
[Status 15:16:43 INFO] acquire complete
[Status 15:16:44 INFO] writing housekeeping
[Sequencer 15:16:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:16:44 INFO] incremented Y scene to 275 completed views
[Sequencer 15:16:44 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:16:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:16:44 INFO] incremented to [AERI set: name Z275, 6 scans, 0 angle, D16300 command] set
[sigmove 15:16:44 INFO] Y275.SIG(18)
[sigmove 15:16:44 DEBUG] transformed Y275Ma.SPC -> Y275MA.SPC
[sigmove 15:16:44 DEBUG] transformed Y275Mb.SPC -> Y275MB.SPC
[sigmove 15:16:44 DEBUG] transformed Y275Mc.SPC -> Y275MC.SPC
[sigmove 15:16:44 DEBUG] transformed Y275Md.SPC -> Y275MD.SPC
[sigmove 15:16:44 DEBUG] transformed Y275Me.SPC -> Y275ME.SPC
[sigmove 15:16:44 DEBUG] transformed Y275Mf.SPC -> Y275MF.SPC
[Status 15:16:44 INFO] data for Y275 transferred to science data processing
[Tidy 15:16:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:16:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:16:44 INFO] resetting WatchDogTimer
[Status 15:16:45 INFO] Starting Set [AERI set: name Z275, 6 scans, 0 angle, D16300 command]
[Ingest 15:16:45 INFO] Sending XML status message
[Status 15:16:45 INFO] Mirror angle: 0
[Mirror 15:16:45 INFO] rotating to position Z
[Status 15:16:45 INFO] .SET file for ACQ96 ready
[Ingest 15:16:46 INFO] Starting acquisition
[Status 15:16:46 INFO] reading housekeeping
[Status 15:17:03 INFO] acquire complete
[Status 15:17:04 INFO] writing housekeeping
[Sequencer 15:17:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:17:04 INFO] incremented Z scene to 275 completed views
[Sequencer 15:17:04 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:17:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:17:04 INFO] incremented to [AERI set: name A276, 6 scans, 120 angle, D28300 command] set
[sigmove 15:17:04 INFO] Z275.SIG(18)
[sigmove 15:17:04 DEBUG] transformed Z275Ma.SPC -> Z275MA.SPC
[sigmove 15:17:04 DEBUG] transformed Z275Mb.SPC -> Z275MB.SPC
[sigmove 15:17:04 DEBUG] transformed Z275Mc.SPC -> Z275MC.SPC
[sigmove 15:17:04 DEBUG] transformed Z275Md.SPC -> Z275MD.SPC
[sigmove 15:17:04 DEBUG] transformed Z275Me.SPC -> Z275ME.SPC
[sigmove 15:17:04 DEBUG] transformed Z275Mf.SPC -> Z275MF.SPC
[Status 15:17:04 INFO] data for Z275 transferred to science data processing
[Tidy 15:17:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:17:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:17:04 INFO] resetting WatchDogTimer
[Status 15:17:05 INFO] Starting Set [AERI set: name A276, 6 scans, 120 angle, D28300 command]
[Ingest 15:17:05 INFO] Sending XML status message
[Status 15:17:05 INFO] Mirror angle: 120
[Mirror 15:17:05 INFO] rotating to position A
[Status 15:17:07 INFO] .SET file for ACQ96 ready
[Ingest 15:17:07 INFO] Starting acquisition
[Status 15:17:07 INFO] reading housekeeping
[Status 15:17:29 INFO] acquire complete
[Status 15:17:30 INFO] writing housekeeping
[Sequencer 15:17:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:17:30 INFO] incremented A scene to 276 completed views
[Sequencer 15:17:30 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:17:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:17:30 INFO] incremented to [AERI set: name H276, 6 scans, 60 angle, D22500 command] set
[sigmove 15:17:30 INFO] A276.SIG(18)
[sigmove 15:17:30 DEBUG] transformed A276Ma.SPC -> A276MA.SPC
[sigmove 15:17:30 DEBUG] transformed A276Mb.SPC -> A276MB.SPC
[sigmove 15:17:30 DEBUG] transformed A276Mc.SPC -> A276MC.SPC
[sigmove 15:17:30 DEBUG] transformed A276Md.SPC -> A276MD.SPC
[sigmove 15:17:30 DEBUG] transformed A276Me.SPC -> A276ME.SPC
[sigmove 15:17:30 DEBUG] transformed A276Mf.SPC -> A276MF.SPC
[Status 15:17:30 INFO] data for A276 transferred to science data processing
[Tidy 15:17:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:17:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:17:30 INFO] resetting WatchDogTimer
[Status 15:17:31 INFO] Starting Set [AERI set: name H276, 6 scans, 60 angle, D22500 command]
[Ingest 15:17:31 INFO] Sending XML status message
[Status 15:17:31 INFO] Mirror angle: 60
[Mirror 15:17:31 INFO] rotating to position H
[Status 15:17:32 INFO] .SET file for ACQ96 ready
[Ingest 15:17:32 INFO] Starting acquisition
[Status 15:17:33 INFO] reading housekeeping
[Status 15:17:51 INFO] acquire complete
[Status 15:17:52 INFO] writing housekeeping
[Sequencer 15:17:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:17:52 INFO] incremented H scene to 276 completed views
[Sequencer 15:17:52 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:17:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:17:52 INFO] incremented to [AERI set: name S276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:17:52 INFO] H276.SIG(18)
[sigmove 15:17:52 DEBUG] transformed H276Ma.SPC -> H276MA.SPC
[sigmove 15:17:52 DEBUG] transformed H276Mb.SPC -> H276MB.SPC
[sigmove 15:17:52 DEBUG] transformed H276Mc.SPC -> H276MC.SPC
[sigmove 15:17:52 DEBUG] transformed H276Md.SPC -> H276MD.SPC
[sigmove 15:17:52 DEBUG] transformed H276Me.SPC -> H276ME.SPC
[sigmove 15:17:52 DEBUG] transformed H276Mf.SPC -> H276MF.SPC
[Status 15:17:52 INFO] data for H276 transferred to science data processing
[Tidy 15:17:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:17:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:17:52 INFO] resetting WatchDogTimer
[Status 15:17:52 INFO] Starting Set [AERI set: name S276, 6 scans, 0 angle, D16300 command]
[Ingest 15:17:52 INFO] Sending XML status message
[Status 15:17:52 INFO] Mirror angle: 0
[Mirror 15:17:52 INFO] rotating to position S
[Status 15:17:53 INFO] .SET file for ACQ96 ready
[Ingest 15:17:54 INFO] Starting acquisition
[Status 15:17:54 INFO] reading housekeeping
[Status 15:18:12 INFO] acquire complete
[Status 15:18:13 INFO] writing housekeeping
[Sequencer 15:18:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:18:13 INFO] incremented S scene to 276 completed views
[Sequencer 15:18:13 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:18:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:18:13 INFO] incremented to [AERI set: name T276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:18:13 INFO] S276.SIG(18)
[sigmove 15:18:13 DEBUG] transformed S276Ma.SPC -> S276MA.SPC
[sigmove 15:18:13 DEBUG] transformed S276Mb.SPC -> S276MB.SPC
[sigmove 15:18:13 DEBUG] transformed S276Mc.SPC -> S276MC.SPC
[sigmove 15:18:13 DEBUG] transformed S276Md.SPC -> S276MD.SPC
[sigmove 15:18:13 DEBUG] transformed S276Me.SPC -> S276ME.SPC
[sigmove 15:18:13 DEBUG] transformed S276Mf.SPC -> S276MF.SPC
[Status 15:18:13 INFO] data for S276 transferred to science data processing
[Tidy 15:18:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:18:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:18:13 INFO] resetting WatchDogTimer
[Status 15:18:13 INFO] Starting Set [AERI set: name T276, 6 scans, 0 angle, D16300 command]
[Ingest 15:18:13 INFO] Sending XML status message
[Status 15:18:13 INFO] Mirror angle: 0
[Mirror 15:18:14 INFO] rotating to position T
[Status 15:18:14 INFO] .SET file for ACQ96 ready
[Ingest 15:18:15 INFO] Starting acquisition
[Status 15:18:15 INFO] reading housekeeping
[Status 15:18:33 INFO] acquire complete
[Status 15:18:34 INFO] writing housekeeping
[Sequencer 15:18:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:18:34 INFO] incremented T scene to 276 completed views
[Sequencer 15:18:34 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:18:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:18:34 INFO] incremented to [AERI set: name U276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:18:34 INFO] T276.SIG(18)
[sigmove 15:18:34 DEBUG] transformed T276Ma.SPC -> T276MA.SPC
[sigmove 15:18:34 DEBUG] transformed T276Mb.SPC -> T276MB.SPC
[sigmove 15:18:34 DEBUG] transformed T276Mc.SPC -> T276MC.SPC
[sigmove 15:18:34 DEBUG] transformed T276Md.SPC -> T276MD.SPC
[sigmove 15:18:34 DEBUG] transformed T276Me.SPC -> T276ME.SPC
[sigmove 15:18:34 DEBUG] transformed T276Mf.SPC -> T276MF.SPC
[Status 15:18:34 INFO] data for T276 transferred to science data processing
[Tidy 15:18:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:18:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:18:34 INFO] resetting WatchDogTimer
[Status 15:18:35 INFO] Starting Set [AERI set: name U276, 6 scans, 0 angle, D16300 command]
[Ingest 15:18:35 INFO] Sending XML status message
[Status 15:18:35 INFO] Mirror angle: 0
[Mirror 15:18:35 INFO] rotating to position U
[Status 15:18:35 INFO] .SET file for ACQ96 ready
[Ingest 15:18:36 INFO] Starting acquisition
[Status 15:18:36 INFO] reading housekeeping
[Status 15:18:53 INFO] acquire complete
[Status 15:18:54 INFO] writing housekeeping
[Sequencer 15:18:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:18:54 INFO] incremented U scene to 276 completed views
[Sequencer 15:18:54 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:18:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:18:54 INFO] incremented to [AERI set: name V276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:18:54 INFO] U276.SIG(18)
[sigmove 15:18:54 DEBUG] transformed U276Ma.SPC -> U276MA.SPC
[sigmove 15:18:54 DEBUG] transformed U276Mb.SPC -> U276MB.SPC
[sigmove 15:18:54 DEBUG] transformed U276Mc.SPC -> U276MC.SPC
[sigmove 15:18:54 DEBUG] transformed U276Md.SPC -> U276MD.SPC
[sigmove 15:18:54 DEBUG] transformed U276Me.SPC -> U276ME.SPC
[sigmove 15:18:54 DEBUG] transformed U276Mf.SPC -> U276MF.SPC
[Status 15:18:54 INFO] data for U276 transferred to science data processing
[Tidy 15:18:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:18:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:18:54 INFO] resetting WatchDogTimer
[Status 15:18:55 INFO] Starting Set [AERI set: name V276, 6 scans, 0 angle, D16300 command]
[Ingest 15:18:55 INFO] Sending XML status message
[Status 15:18:55 INFO] Mirror angle: 0
[Mirror 15:18:55 INFO] rotating to position V
[Status 15:18:56 INFO] .SET file for ACQ96 ready
[Ingest 15:18:56 INFO] Starting acquisition
[Status 15:18:56 INFO] reading housekeeping
[Status 15:19:14 INFO] acquire complete
[Status 15:19:15 INFO] writing housekeeping
[Sequencer 15:19:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:19:15 INFO] incremented V scene to 276 completed views
[Sequencer 15:19:15 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:19:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:19:15 INFO] incremented to [AERI set: name W276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:19:15 INFO] V276.SIG(18)
[sigmove 15:19:15 DEBUG] transformed V276Ma.SPC -> V276MA.SPC
[sigmove 15:19:15 DEBUG] transformed V276Mb.SPC -> V276MB.SPC
[sigmove 15:19:15 DEBUG] transformed V276Mc.SPC -> V276MC.SPC
[sigmove 15:19:15 DEBUG] transformed V276Md.SPC -> V276MD.SPC
[sigmove 15:19:15 DEBUG] transformed V276Me.SPC -> V276ME.SPC
[sigmove 15:19:15 DEBUG] transformed V276Mf.SPC -> V276MF.SPC
[Status 15:19:15 INFO] data for V276 transferred to science data processing
[Tidy 15:19:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:19:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:19:15 INFO] resetting WatchDogTimer
[Status 15:19:15 INFO] Starting Set [AERI set: name W276, 6 scans, 0 angle, D16300 command]
[Ingest 15:19:15 INFO] Sending XML status message
[Status 15:19:15 INFO] Mirror angle: 0
[Mirror 15:19:15 INFO] rotating to position W
[Status 15:19:16 INFO] .SET file for ACQ96 ready
[Ingest 15:19:16 INFO] Starting acquisition
[Status 15:19:16 INFO] reading housekeeping
[Status 15:19:34 INFO] acquire complete
[Status 15:19:35 INFO] writing housekeeping
[Sequencer 15:19:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:19:35 INFO] incremented W scene to 276 completed views
[Sequencer 15:19:35 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:19:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:19:35 INFO] incremented to [AERI set: name X276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:19:35 INFO] W276.SIG(18)
[sigmove 15:19:35 DEBUG] transformed W276Ma.SPC -> W276MA.SPC
[sigmove 15:19:35 DEBUG] transformed W276Mb.SPC -> W276MB.SPC
[sigmove 15:19:35 DEBUG] transformed W276Mc.SPC -> W276MC.SPC
[sigmove 15:19:35 DEBUG] transformed W276Md.SPC -> W276MD.SPC
[sigmove 15:19:35 DEBUG] transformed W276Me.SPC -> W276ME.SPC
[sigmove 15:19:35 DEBUG] transformed W276Mf.SPC -> W276MF.SPC
[Status 15:19:35 INFO] data for W276 transferred to science data processing
[Tidy 15:19:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:19:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:19:35 INFO] resetting WatchDogTimer
[Status 15:19:35 INFO] Starting Set [AERI set: name X276, 6 scans, 0 angle, D16300 command]
[Ingest 15:19:35 INFO] Sending XML status message
[Status 15:19:35 INFO] Mirror angle: 0
[Mirror 15:19:36 INFO] rotating to position X
[Status 15:19:37 INFO] .SET file for ACQ96 ready
[Ingest 15:19:38 INFO] Starting acquisition
[Status 15:19:38 INFO] reading housekeeping
[Status 15:19:55 INFO] acquire complete
[Status 15:19:56 INFO] writing housekeeping
[Sequencer 15:19:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:19:56 INFO] incremented X scene to 276 completed views
[Sequencer 15:19:56 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:19:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:19:56 INFO] incremented to [AERI set: name Y276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:19:56 INFO] X276.SIG(18)
[sigmove 15:19:56 DEBUG] transformed X276Ma.SPC -> X276MA.SPC
[sigmove 15:19:56 DEBUG] transformed X276Mb.SPC -> X276MB.SPC
[sigmove 15:19:56 DEBUG] transformed X276Mc.SPC -> X276MC.SPC
[sigmove 15:19:56 DEBUG] transformed X276Md.SPC -> X276MD.SPC
[sigmove 15:19:56 DEBUG] transformed X276Me.SPC -> X276ME.SPC
[sigmove 15:19:56 DEBUG] transformed X276Mf.SPC -> X276MF.SPC
[Status 15:19:56 INFO] data for X276 transferred to science data processing
[Tidy 15:19:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:19:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:19:56 INFO] resetting WatchDogTimer
[Status 15:19:56 INFO] Starting Set [AERI set: name Y276, 6 scans, 0 angle, D16300 command]
[Ingest 15:19:56 INFO] Sending XML status message
[Status 15:19:56 INFO] Mirror angle: 0
[Mirror 15:19:57 INFO] rotating to position Y
[Status 15:19:57 INFO] .SET file for ACQ96 ready
[Ingest 15:19:58 INFO] Starting acquisition
[Status 15:19:58 INFO] reading housekeeping
[Status 15:20:15 INFO] acquire complete
[Status 15:20:16 INFO] writing housekeeping
[Sequencer 15:20:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:20:16 INFO] incremented Y scene to 276 completed views
[Sequencer 15:20:16 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:20:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:20:16 INFO] incremented to [AERI set: name Z276, 6 scans, 0 angle, D16300 command] set
[sigmove 15:20:16 INFO] Y276.SIG(18)
[sigmove 15:20:16 DEBUG] transformed Y276Ma.SPC -> Y276MA.SPC
[sigmove 15:20:16 DEBUG] transformed Y276Mb.SPC -> Y276MB.SPC
[sigmove 15:20:16 DEBUG] transformed Y276Mc.SPC -> Y276MC.SPC
[sigmove 15:20:16 DEBUG] transformed Y276Md.SPC -> Y276MD.SPC
[sigmove 15:20:16 DEBUG] transformed Y276Me.SPC -> Y276ME.SPC
[sigmove 15:20:16 DEBUG] transformed Y276Mf.SPC -> Y276MF.SPC
[Status 15:20:16 INFO] data for Y276 transferred to science data processing
[Tidy 15:20:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:20:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:20:16 INFO] resetting WatchDogTimer
[Status 15:20:17 INFO] Starting Set [AERI set: name Z276, 6 scans, 0 angle, D16300 command]
[Ingest 15:20:17 INFO] Sending XML status message
[Status 15:20:17 INFO] Mirror angle: 0
[Mirror 15:20:17 INFO] rotating to position Z
[Status 15:20:18 INFO] .SET file for ACQ96 ready
[Ingest 15:20:18 INFO] Starting acquisition
[Status 15:20:18 INFO] reading housekeeping
[Status 15:20:35 INFO] acquire complete
[Status 15:20:36 INFO] writing housekeeping
[Sequencer 15:20:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:20:36 INFO] incremented Z scene to 276 completed views
[Sequencer 15:20:36 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:20:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:20:36 INFO] incremented to [AERI set: name H277, 6 scans, 60 angle, D22500 command] set
[sigmove 15:20:36 INFO] Z276.SIG(18)
[sigmove 15:20:36 DEBUG] transformed Z276Ma.SPC -> Z276MA.SPC
[sigmove 15:20:36 DEBUG] transformed Z276Mb.SPC -> Z276MB.SPC
[sigmove 15:20:36 DEBUG] transformed Z276Mc.SPC -> Z276MC.SPC
[sigmove 15:20:36 DEBUG] transformed Z276Md.SPC -> Z276MD.SPC
[sigmove 15:20:36 DEBUG] transformed Z276Me.SPC -> Z276ME.SPC
[sigmove 15:20:36 DEBUG] transformed Z276Mf.SPC -> Z276MF.SPC
[Status 15:20:36 INFO] data for Z276 transferred to science data processing
[Tidy 15:20:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:20:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:20:36 INFO] resetting WatchDogTimer
[Status 15:20:37 INFO] Starting Set [AERI set: name H277, 6 scans, 60 angle, D22500 command]
[Ingest 15:20:37 INFO] Sending XML status message
[Status 15:20:37 INFO] Mirror angle: 60
[Mirror 15:20:37 INFO] rotating to position H
[Status 15:20:38 INFO] .SET file for ACQ96 ready
[Ingest 15:20:38 INFO] Starting acquisition
[Status 15:20:39 INFO] reading housekeeping
[Status 15:20:57 INFO] acquire complete
[Status 15:20:58 INFO] writing housekeeping
[Sequencer 15:20:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:20:58 INFO] incremented H scene to 277 completed views
[Sequencer 15:20:58 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:20:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:20:58 INFO] incremented to [AERI set: name A277, 6 scans, 120 angle, D28300 command] set
[sigmove 15:20:58 INFO] H277.SIG(18)
[sigmove 15:20:58 DEBUG] transformed H277Ma.SPC -> H277MA.SPC
[sigmove 15:20:58 DEBUG] transformed H277Mb.SPC -> H277MB.SPC
[sigmove 15:20:58 DEBUG] transformed H277Mc.SPC -> H277MC.SPC
[sigmove 15:20:58 DEBUG] transformed H277Md.SPC -> H277MD.SPC
[sigmove 15:20:58 DEBUG] transformed H277Me.SPC -> H277ME.SPC
[sigmove 15:20:58 DEBUG] transformed H277Mf.SPC -> H277MF.SPC
[Status 15:20:58 INFO] data for H277 transferred to science data processing
[Tidy 15:20:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:20:58 INFO] A275.FIN(19),H275.FIN(19),S275.FIN(19),T275.FIN(19),U275.FIN(19),V275.FIN(19),W275.FIN(19),X275.FIN(19),Y275.FIN(19),Z275.FIN(19),A276.FIN(19),H276.FIN(19),S276.FIN(19),T276.FIN(19),U276.FIN(19),V276.FIN(19),W276.FIN(19),X276.FIN(19),Y276.FIN(19),Z276.FIN(19)
[sigmove 15:20:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:20:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:21:03 DEBUG] done zipping
[WatchDog 15:21:03 INFO] resetting WatchDogTimer
[Status 15:21:03 INFO] Starting Set [AERI set: name A277, 6 scans, 120 angle, D28300 command]
[Ingest 15:21:03 INFO] Sending XML status message
[Status 15:21:03 INFO] Mirror angle: 120
[Mirror 15:21:04 INFO] rotating to position A
[Status 15:21:05 INFO] .SET file for ACQ96 ready
[Ingest 15:21:05 INFO] Starting acquisition
[Status 15:21:06 INFO] reading housekeeping
[Status 15:21:24 INFO] acquire complete
[Status 15:21:25 INFO] writing housekeeping
[Sequencer 15:21:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:21:25 INFO] incremented A scene to 277 completed views
[Sequencer 15:21:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:21:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:21:25 INFO] incremented to [AERI set: name S277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:21:25 INFO] A277.SIG(18)
[sigmove 15:21:25 DEBUG] transformed A277Ma.SPC -> A277MA.SPC
[sigmove 15:21:25 DEBUG] transformed A277Mb.SPC -> A277MB.SPC
[sigmove 15:21:25 DEBUG] transformed A277Mc.SPC -> A277MC.SPC
[sigmove 15:21:25 DEBUG] transformed A277Md.SPC -> A277MD.SPC
[sigmove 15:21:25 DEBUG] transformed A277Me.SPC -> A277ME.SPC
[sigmove 15:21:25 DEBUG] transformed A277Mf.SPC -> A277MF.SPC
[Status 15:21:25 INFO] data for A277 transferred to science data processing
[Tidy 15:21:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:21:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:21:25 INFO] resetting WatchDogTimer
[Status 15:21:25 INFO] Starting Set [AERI set: name S277, 6 scans, 0 angle, D16300 command]
[Ingest 15:21:25 INFO] Sending XML status message
[Status 15:21:25 INFO] Mirror angle: 0
[Mirror 15:21:25 INFO] rotating to position S
[Status 15:21:27 INFO] .SET file for ACQ96 ready
[Ingest 15:21:27 INFO] Starting acquisition
[Status 15:21:28 INFO] reading housekeeping
[Status 15:21:45 INFO] acquire complete
[Status 15:21:46 INFO] writing housekeeping
[Sequencer 15:21:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:21:46 INFO] incremented S scene to 277 completed views
[Sequencer 15:21:46 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:21:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:21:46 INFO] incremented to [AERI set: name T277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:21:46 INFO] S277.SIG(18)
[sigmove 15:21:46 DEBUG] transformed S277Ma.SPC -> S277MA.SPC
[sigmove 15:21:46 DEBUG] transformed S277Mb.SPC -> S277MB.SPC
[sigmove 15:21:46 DEBUG] transformed S277Mc.SPC -> S277MC.SPC
[sigmove 15:21:46 DEBUG] transformed S277Md.SPC -> S277MD.SPC
[sigmove 15:21:46 DEBUG] transformed S277Me.SPC -> S277ME.SPC
[sigmove 15:21:46 DEBUG] transformed S277Mf.SPC -> S277MF.SPC
[Status 15:21:46 INFO] data for S277 transferred to science data processing
[Tidy 15:21:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:21:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:21:46 INFO] resetting WatchDogTimer
[Status 15:21:46 INFO] Starting Set [AERI set: name T277, 6 scans, 0 angle, D16300 command]
[Ingest 15:21:46 INFO] Sending XML status message
[Status 15:21:46 INFO] Mirror angle: 0
[Mirror 15:21:47 INFO] rotating to position T
[Status 15:21:47 INFO] .SET file for ACQ96 ready
[Ingest 15:21:48 INFO] Starting acquisition
[Status 15:21:48 INFO] reading housekeeping
[Status 15:22:05 INFO] acquire complete
[Status 15:22:06 INFO] writing housekeeping
[Sequencer 15:22:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:22:06 INFO] incremented T scene to 277 completed views
[Sequencer 15:22:06 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:22:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:22:06 INFO] incremented to [AERI set: name U277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:22:06 INFO] T277.SIG(18)
[sigmove 15:22:06 DEBUG] transformed T277Ma.SPC -> T277MA.SPC
[sigmove 15:22:06 DEBUG] transformed T277Mb.SPC -> T277MB.SPC
[sigmove 15:22:06 DEBUG] transformed T277Mc.SPC -> T277MC.SPC
[sigmove 15:22:06 DEBUG] transformed T277Md.SPC -> T277MD.SPC
[sigmove 15:22:06 DEBUG] transformed T277Me.SPC -> T277ME.SPC
[sigmove 15:22:06 DEBUG] transformed T277Mf.SPC -> T277MF.SPC
[Status 15:22:06 INFO] data for T277 transferred to science data processing
[Tidy 15:22:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:22:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:22:06 INFO] resetting WatchDogTimer
[Status 15:22:07 INFO] Starting Set [AERI set: name U277, 6 scans, 0 angle, D16300 command]
[Ingest 15:22:07 INFO] Sending XML status message
[Status 15:22:07 INFO] Mirror angle: 0
[Mirror 15:22:07 INFO] rotating to position U
[Status 15:22:07 INFO] .SET file for ACQ96 ready
[Ingest 15:22:08 INFO] Starting acquisition
[Status 15:22:08 INFO] reading housekeeping
[Status 15:22:25 INFO] acquire complete
[Status 15:22:26 INFO] writing housekeeping
[Sequencer 15:22:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:22:26 INFO] incremented U scene to 277 completed views
[Sequencer 15:22:26 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:22:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:22:26 INFO] incremented to [AERI set: name V277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:22:26 INFO] U277.SIG(18)
[sigmove 15:22:26 DEBUG] transformed U277Ma.SPC -> U277MA.SPC
[sigmove 15:22:26 DEBUG] transformed U277Mb.SPC -> U277MB.SPC
[sigmove 15:22:26 DEBUG] transformed U277Mc.SPC -> U277MC.SPC
[sigmove 15:22:26 DEBUG] transformed U277Md.SPC -> U277MD.SPC
[sigmove 15:22:26 DEBUG] transformed U277Me.SPC -> U277ME.SPC
[sigmove 15:22:26 DEBUG] transformed U277Mf.SPC -> U277MF.SPC
[Status 15:22:26 INFO] data for U277 transferred to science data processing
[Tidy 15:22:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:22:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:22:26 INFO] resetting WatchDogTimer
[Status 15:22:27 INFO] Starting Set [AERI set: name V277, 6 scans, 0 angle, D16300 command]
[Ingest 15:22:27 INFO] Sending XML status message
[Status 15:22:27 INFO] Mirror angle: 0
[Mirror 15:22:27 INFO] rotating to position V
[Status 15:22:28 INFO] .SET file for ACQ96 ready
[Ingest 15:22:28 INFO] Starting acquisition
[Status 15:22:28 INFO] reading housekeeping
[Status 15:22:46 INFO] acquire complete
[Status 15:22:47 INFO] writing housekeeping
[Sequencer 15:22:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:22:47 INFO] incremented V scene to 277 completed views
[Sequencer 15:22:47 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:22:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:22:47 INFO] incremented to [AERI set: name W277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:22:47 INFO] V277.SIG(18)
[sigmove 15:22:47 DEBUG] transformed V277Ma.SPC -> V277MA.SPC
[sigmove 15:22:47 DEBUG] transformed V277Mb.SPC -> V277MB.SPC
[sigmove 15:22:47 DEBUG] transformed V277Mc.SPC -> V277MC.SPC
[sigmove 15:22:47 DEBUG] transformed V277Md.SPC -> V277MD.SPC
[sigmove 15:22:47 DEBUG] transformed V277Me.SPC -> V277ME.SPC
[sigmove 15:22:47 DEBUG] transformed V277Mf.SPC -> V277MF.SPC
[Status 15:22:47 INFO] data for V277 transferred to science data processing
[Tidy 15:22:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:22:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:22:47 INFO] resetting WatchDogTimer
[Status 15:22:47 INFO] Starting Set [AERI set: name W277, 6 scans, 0 angle, D16300 command]
[Ingest 15:22:47 INFO] Sending XML status message
[Status 15:22:47 INFO] Mirror angle: 0
[Mirror 15:22:47 INFO] rotating to position W
[Status 15:22:48 INFO] .SET file for ACQ96 ready
[Ingest 15:22:48 INFO] Starting acquisition
[Status 15:22:48 INFO] reading housekeeping
[Status 15:23:06 INFO] acquire complete
[Status 15:23:07 INFO] writing housekeeping
[Sequencer 15:23:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:23:07 INFO] incremented W scene to 277 completed views
[Sequencer 15:23:07 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:23:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:23:07 INFO] incremented to [AERI set: name X277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:23:07 INFO] W277.SIG(18)
[sigmove 15:23:07 DEBUG] transformed W277Ma.SPC -> W277MA.SPC
[sigmove 15:23:07 DEBUG] transformed W277Mb.SPC -> W277MB.SPC
[sigmove 15:23:07 DEBUG] transformed W277Mc.SPC -> W277MC.SPC
[sigmove 15:23:07 DEBUG] transformed W277Md.SPC -> W277MD.SPC
[sigmove 15:23:07 DEBUG] transformed W277Me.SPC -> W277ME.SPC
[sigmove 15:23:07 DEBUG] transformed W277Mf.SPC -> W277MF.SPC
[Status 15:23:07 INFO] data for W277 transferred to science data processing
[Tidy 15:23:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:23:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:23:07 INFO] resetting WatchDogTimer
[Status 15:23:07 INFO] Starting Set [AERI set: name X277, 6 scans, 0 angle, D16300 command]
[Ingest 15:23:07 INFO] Sending XML status message
[Status 15:23:07 INFO] Mirror angle: 0
[Mirror 15:23:08 INFO] rotating to position X
[Status 15:23:08 INFO] .SET file for ACQ96 ready
[Ingest 15:23:08 INFO] Starting acquisition
[Status 15:23:09 INFO] reading housekeeping
[Status 15:23:26 INFO] acquire complete
[Status 15:23:27 INFO] writing housekeeping
[Sequencer 15:23:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:23:27 INFO] incremented X scene to 277 completed views
[Sequencer 15:23:27 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:23:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:23:27 INFO] incremented to [AERI set: name Y277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:23:27 INFO] X277.SIG(18)
[sigmove 15:23:27 DEBUG] transformed X277Ma.SPC -> X277MA.SPC
[sigmove 15:23:27 DEBUG] transformed X277Mb.SPC -> X277MB.SPC
[sigmove 15:23:27 DEBUG] transformed X277Mc.SPC -> X277MC.SPC
[sigmove 15:23:27 DEBUG] transformed X277Md.SPC -> X277MD.SPC
[sigmove 15:23:27 DEBUG] transformed X277Me.SPC -> X277ME.SPC
[sigmove 15:23:27 DEBUG] transformed X277Mf.SPC -> X277MF.SPC
[Status 15:23:27 INFO] data for X277 transferred to science data processing
[Tidy 15:23:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:23:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:23:27 INFO] resetting WatchDogTimer
[Status 15:23:27 INFO] Starting Set [AERI set: name Y277, 6 scans, 0 angle, D16300 command]
[Ingest 15:23:27 INFO] Sending XML status message
[Status 15:23:27 INFO] Mirror angle: 0
[Mirror 15:23:28 INFO] rotating to position Y
[Status 15:23:28 INFO] .SET file for ACQ96 ready
[Ingest 15:23:29 INFO] Starting acquisition
[Status 15:23:29 INFO] reading housekeeping
[Status 15:23:46 INFO] acquire complete
[Status 15:23:47 INFO] writing housekeeping
[Sequencer 15:23:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:23:47 INFO] incremented Y scene to 277 completed views
[Sequencer 15:23:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:23:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:23:47 INFO] incremented to [AERI set: name Z277, 6 scans, 0 angle, D16300 command] set
[sigmove 15:23:47 INFO] Y277.SIG(18)
[sigmove 15:23:47 DEBUG] transformed Y277Ma.SPC -> Y277MA.SPC
[sigmove 15:23:47 DEBUG] transformed Y277Mb.SPC -> Y277MB.SPC
[sigmove 15:23:47 DEBUG] transformed Y277Mc.SPC -> Y277MC.SPC
[sigmove 15:23:47 DEBUG] transformed Y277Md.SPC -> Y277MD.SPC
[sigmove 15:23:47 DEBUG] transformed Y277Me.SPC -> Y277ME.SPC
[sigmove 15:23:47 DEBUG] transformed Y277Mf.SPC -> Y277MF.SPC
[Status 15:23:47 INFO] data for Y277 transferred to science data processing
[Tidy 15:23:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:23:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:23:47 INFO] resetting WatchDogTimer
[Status 15:23:48 INFO] Starting Set [AERI set: name Z277, 6 scans, 0 angle, D16300 command]
[Ingest 15:23:48 INFO] Sending XML status message
[Status 15:23:48 INFO] Mirror angle: 0
[Mirror 15:23:48 INFO] rotating to position Z
[Status 15:23:48 INFO] .SET file for ACQ96 ready
[Ingest 15:23:49 INFO] Starting acquisition
[Status 15:23:49 INFO] reading housekeeping
[Status 15:24:06 INFO] acquire complete
[Status 15:24:07 INFO] writing housekeeping
[Sequencer 15:24:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:24:07 INFO] incremented Z scene to 277 completed views
[Sequencer 15:24:07 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:24:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:24:07 INFO] incremented to [AERI set: name A278, 6 scans, 120 angle, D28300 command] set
[sigmove 15:24:07 INFO] Z277.SIG(18)
[sigmove 15:24:07 DEBUG] transformed Z277Ma.SPC -> Z277MA.SPC
[sigmove 15:24:07 DEBUG] transformed Z277Mb.SPC -> Z277MB.SPC
[sigmove 15:24:07 DEBUG] transformed Z277Mc.SPC -> Z277MC.SPC
[sigmove 15:24:07 DEBUG] transformed Z277Md.SPC -> Z277MD.SPC
[sigmove 15:24:07 DEBUG] transformed Z277Me.SPC -> Z277ME.SPC
[sigmove 15:24:07 DEBUG] transformed Z277Mf.SPC -> Z277MF.SPC
[Status 15:24:07 INFO] data for Z277 transferred to science data processing
[Tidy 15:24:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:24:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:24:07 INFO] resetting WatchDogTimer
[Status 15:24:08 INFO] Starting Set [AERI set: name A278, 6 scans, 120 angle, D28300 command]
[Ingest 15:24:08 INFO] Sending XML status message
[Status 15:24:08 INFO] Mirror angle: 120
[Mirror 15:24:08 INFO] rotating to position A
[Status 15:24:10 INFO] .SET file for ACQ96 ready
[Ingest 15:24:10 INFO] Starting acquisition
[Status 15:24:10 INFO] reading housekeeping
[Status 15:24:28 INFO] acquire complete
[Status 15:24:29 INFO] writing housekeeping
[Sequencer 15:24:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:24:29 INFO] incremented A scene to 278 completed views
[Sequencer 15:24:29 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:24:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:24:29 INFO] incremented to [AERI set: name H278, 6 scans, 60 angle, D22500 command] set
[sigmove 15:24:29 INFO] A278.SIG(18)
[sigmove 15:24:29 DEBUG] transformed A278Ma.SPC -> A278MA.SPC
[sigmove 15:24:29 DEBUG] transformed A278Mb.SPC -> A278MB.SPC
[sigmove 15:24:29 DEBUG] transformed A278Mc.SPC -> A278MC.SPC
[sigmove 15:24:29 DEBUG] transformed A278Md.SPC -> A278MD.SPC
[sigmove 15:24:29 DEBUG] transformed A278Me.SPC -> A278ME.SPC
[sigmove 15:24:29 DEBUG] transformed A278Mf.SPC -> A278MF.SPC
[Status 15:24:29 INFO] data for A278 transferred to science data processing
[Tidy 15:24:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:24:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:24:29 INFO] resetting WatchDogTimer
[Status 15:24:29 INFO] Starting Set [AERI set: name H278, 6 scans, 60 angle, D22500 command]
[Ingest 15:24:29 INFO] Sending XML status message
[Status 15:24:29 INFO] Mirror angle: 60
[Mirror 15:24:30 INFO] rotating to position H
[Status 15:24:31 INFO] .SET file for ACQ96 ready
[Ingest 15:24:31 INFO] Starting acquisition
[Status 15:24:31 INFO] reading housekeeping
[Status 15:24:49 INFO] acquire complete
[Status 15:24:50 INFO] writing housekeeping
[Sequencer 15:24:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:24:50 INFO] incremented H scene to 278 completed views
[Sequencer 15:24:50 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:24:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:24:50 INFO] incremented to [AERI set: name S278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:24:50 INFO] H278.SIG(18)
[sigmove 15:24:50 DEBUG] transformed H278Ma.SPC -> H278MA.SPC
[sigmove 15:24:50 DEBUG] transformed H278Mb.SPC -> H278MB.SPC
[sigmove 15:24:50 DEBUG] transformed H278Mc.SPC -> H278MC.SPC
[sigmove 15:24:50 DEBUG] transformed H278Md.SPC -> H278MD.SPC
[sigmove 15:24:50 DEBUG] transformed H278Me.SPC -> H278ME.SPC
[sigmove 15:24:50 DEBUG] transformed H278Mf.SPC -> H278MF.SPC
[Status 15:24:50 INFO] data for H278 transferred to science data processing
[Tidy 15:24:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:24:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:24:50 INFO] resetting WatchDogTimer
[Status 15:24:50 INFO] Starting Set [AERI set: name S278, 6 scans, 0 angle, D16300 command]
[Ingest 15:24:50 INFO] Sending XML status message
[Status 15:24:50 INFO] Mirror angle: 0
[Mirror 15:24:51 INFO] rotating to position S
[Status 15:24:52 INFO] .SET file for ACQ96 ready
[Ingest 15:24:52 INFO] Starting acquisition
[Status 15:24:53 INFO] reading housekeeping
[Status 15:25:10 INFO] acquire complete
[Status 15:25:11 INFO] writing housekeeping
[Sequencer 15:25:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:25:11 INFO] incremented S scene to 278 completed views
[Sequencer 15:25:11 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:25:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:25:11 INFO] incremented to [AERI set: name T278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:25:11 INFO] S278.SIG(18)
[sigmove 15:25:11 DEBUG] transformed S278Ma.SPC -> S278MA.SPC
[sigmove 15:25:11 DEBUG] transformed S278Mb.SPC -> S278MB.SPC
[sigmove 15:25:11 DEBUG] transformed S278Mc.SPC -> S278MC.SPC
[sigmove 15:25:11 DEBUG] transformed S278Md.SPC -> S278MD.SPC
[sigmove 15:25:11 DEBUG] transformed S278Me.SPC -> S278ME.SPC
[sigmove 15:25:11 DEBUG] transformed S278Mf.SPC -> S278MF.SPC
[Status 15:25:11 INFO] data for S278 transferred to science data processing
[Tidy 15:25:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:25:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:25:11 INFO] resetting WatchDogTimer
[Status 15:25:12 INFO] Starting Set [AERI set: name T278, 6 scans, 0 angle, D16300 command]
[Ingest 15:25:12 INFO] Sending XML status message
[Status 15:25:12 INFO] Mirror angle: 0
[Mirror 15:25:12 INFO] rotating to position T
[Status 15:25:13 INFO] .SET file for ACQ96 ready
[Ingest 15:25:13 INFO] Starting acquisition
[Status 15:25:13 INFO] reading housekeeping
[Status 15:25:32 INFO] acquire complete
[Status 15:25:33 INFO] writing housekeeping
[Sequencer 15:25:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:25:33 INFO] incremented T scene to 278 completed views
[Sequencer 15:25:33 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:25:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:25:33 INFO] incremented to [AERI set: name U278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:25:33 INFO] T278.SIG(18)
[sigmove 15:25:33 DEBUG] transformed T278Ma.SPC -> T278MA.SPC
[sigmove 15:25:33 DEBUG] transformed T278Mb.SPC -> T278MB.SPC
[sigmove 15:25:33 DEBUG] transformed T278Mc.SPC -> T278MC.SPC
[sigmove 15:25:33 DEBUG] transformed T278Md.SPC -> T278MD.SPC
[sigmove 15:25:33 DEBUG] transformed T278Me.SPC -> T278ME.SPC
[sigmove 15:25:33 DEBUG] transformed T278Mf.SPC -> T278MF.SPC
[Status 15:25:33 INFO] data for T278 transferred to science data processing
[Tidy 15:25:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:25:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:25:33 INFO] resetting WatchDogTimer
[Status 15:25:33 INFO] Starting Set [AERI set: name U278, 6 scans, 0 angle, D16300 command]
[Ingest 15:25:33 INFO] Sending XML status message
[Status 15:25:33 INFO] Mirror angle: 0
[Mirror 15:25:33 INFO] rotating to position U
[Status 15:25:34 INFO] .SET file for ACQ96 ready
[Ingest 15:25:34 INFO] Starting acquisition
[Status 15:25:35 INFO] reading housekeeping
[Status 15:25:52 INFO] acquire complete
[Status 15:25:53 INFO] writing housekeeping
[Sequencer 15:25:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:25:53 INFO] incremented U scene to 278 completed views
[Sequencer 15:25:53 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:25:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:25:53 INFO] incremented to [AERI set: name V278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:25:53 INFO] U278.SIG(18)
[sigmove 15:25:53 DEBUG] transformed U278Ma.SPC -> U278MA.SPC
[sigmove 15:25:53 DEBUG] transformed U278Mb.SPC -> U278MB.SPC
[sigmove 15:25:53 DEBUG] transformed U278Mc.SPC -> U278MC.SPC
[sigmove 15:25:53 DEBUG] transformed U278Md.SPC -> U278MD.SPC
[sigmove 15:25:53 DEBUG] transformed U278Me.SPC -> U278ME.SPC
[sigmove 15:25:53 DEBUG] transformed U278Mf.SPC -> U278MF.SPC
[Status 15:25:53 INFO] data for U278 transferred to science data processing
[Tidy 15:25:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:25:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:25:53 INFO] resetting WatchDogTimer
[Status 15:25:53 INFO] Starting Set [AERI set: name V278, 6 scans, 0 angle, D16300 command]
[Ingest 15:25:53 INFO] Sending XML status message
[Status 15:25:53 INFO] Mirror angle: 0
[Mirror 15:25:54 INFO] rotating to position V
[Status 15:25:54 INFO] .SET file for ACQ96 ready
[Ingest 15:25:54 INFO] Starting acquisition
[Status 15:25:55 INFO] reading housekeeping
[Status 15:26:12 INFO] acquire complete
[Status 15:26:13 INFO] writing housekeeping
[Sequencer 15:26:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:26:13 INFO] incremented V scene to 278 completed views
[Sequencer 15:26:13 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:26:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:26:13 INFO] incremented to [AERI set: name W278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:26:13 INFO] V278.SIG(18)
[sigmove 15:26:13 DEBUG] transformed V278Ma.SPC -> V278MA.SPC
[sigmove 15:26:13 DEBUG] transformed V278Mb.SPC -> V278MB.SPC
[sigmove 15:26:13 DEBUG] transformed V278Mc.SPC -> V278MC.SPC
[sigmove 15:26:13 DEBUG] transformed V278Md.SPC -> V278MD.SPC
[sigmove 15:26:13 DEBUG] transformed V278Me.SPC -> V278ME.SPC
[sigmove 15:26:13 DEBUG] transformed V278Mf.SPC -> V278MF.SPC
[Status 15:26:13 INFO] data for V278 transferred to science data processing
[Tidy 15:26:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:26:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:26:13 INFO] resetting WatchDogTimer
[Status 15:26:13 INFO] Starting Set [AERI set: name W278, 6 scans, 0 angle, D16300 command]
[Ingest 15:26:13 INFO] Sending XML status message
[Status 15:26:13 INFO] Mirror angle: 0
[Mirror 15:26:14 INFO] rotating to position W
[Status 15:26:14 INFO] .SET file for ACQ96 ready
[Ingest 15:26:15 INFO] Starting acquisition
[Status 15:26:15 INFO] reading housekeeping
[Status 15:26:32 INFO] acquire complete
[Status 15:26:33 INFO] writing housekeeping
[Sequencer 15:26:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:26:33 INFO] incremented W scene to 278 completed views
[Sequencer 15:26:33 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:26:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:26:33 INFO] incremented to [AERI set: name X278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:26:33 INFO] W278.SIG(18)
[sigmove 15:26:33 DEBUG] transformed W278Ma.SPC -> W278MA.SPC
[sigmove 15:26:33 DEBUG] transformed W278Mb.SPC -> W278MB.SPC
[sigmove 15:26:33 DEBUG] transformed W278Mc.SPC -> W278MC.SPC
[sigmove 15:26:33 DEBUG] transformed W278Md.SPC -> W278MD.SPC
[sigmove 15:26:33 DEBUG] transformed W278Me.SPC -> W278ME.SPC
[sigmove 15:26:33 DEBUG] transformed W278Mf.SPC -> W278MF.SPC
[Status 15:26:33 INFO] data for W278 transferred to science data processing
[Tidy 15:26:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:26:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:26:33 INFO] resetting WatchDogTimer
[Status 15:26:34 INFO] Starting Set [AERI set: name X278, 6 scans, 0 angle, D16300 command]
[Ingest 15:26:34 INFO] Sending XML status message
[Status 15:26:34 INFO] Mirror angle: 0
[Mirror 15:26:34 INFO] rotating to position X
[Status 15:26:35 INFO] .SET file for ACQ96 ready
[Ingest 15:26:35 INFO] Starting acquisition
[Status 15:26:35 INFO] reading housekeeping
[Status 15:26:53 INFO] acquire complete
[Status 15:26:53 INFO] writing housekeeping
[Sequencer 15:26:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:26:53 INFO] incremented X scene to 278 completed views
[Sequencer 15:26:53 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:26:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:26:53 INFO] incremented to [AERI set: name Y278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:26:53 INFO] X278.SIG(18)
[sigmove 15:26:53 DEBUG] transformed X278Ma.SPC -> X278MA.SPC
[sigmove 15:26:53 DEBUG] transformed X278Mb.SPC -> X278MB.SPC
[sigmove 15:26:53 DEBUG] transformed X278Mc.SPC -> X278MC.SPC
[sigmove 15:26:53 DEBUG] transformed X278Md.SPC -> X278MD.SPC
[sigmove 15:26:53 DEBUG] transformed X278Me.SPC -> X278ME.SPC
[sigmove 15:26:53 DEBUG] transformed X278Mf.SPC -> X278MF.SPC
[Status 15:26:53 INFO] data for X278 transferred to science data processing
[Tidy 15:26:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:26:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:26:53 INFO] resetting WatchDogTimer
[Status 15:26:54 INFO] Starting Set [AERI set: name Y278, 6 scans, 0 angle, D16300 command]
[Ingest 15:26:54 INFO] Sending XML status message
[Status 15:26:54 INFO] Mirror angle: 0
[Mirror 15:26:54 INFO] rotating to position Y
[Status 15:26:55 INFO] .SET file for ACQ96 ready
[Ingest 15:26:55 INFO] Starting acquisition
[Status 15:26:55 INFO] reading housekeeping
[Status 15:27:13 INFO] acquire complete
[Status 15:27:14 INFO] writing housekeeping
[Sequencer 15:27:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:27:14 INFO] incremented Y scene to 278 completed views
[Sequencer 15:27:14 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:27:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:27:14 INFO] incremented to [AERI set: name Z278, 6 scans, 0 angle, D16300 command] set
[sigmove 15:27:14 INFO] Y278.SIG(18)
[sigmove 15:27:14 DEBUG] transformed Y278Ma.SPC -> Y278MA.SPC
[sigmove 15:27:14 DEBUG] transformed Y278Mb.SPC -> Y278MB.SPC
[sigmove 15:27:14 DEBUG] transformed Y278Mc.SPC -> Y278MC.SPC
[sigmove 15:27:14 DEBUG] transformed Y278Md.SPC -> Y278MD.SPC
[sigmove 15:27:14 DEBUG] transformed Y278Me.SPC -> Y278ME.SPC
[sigmove 15:27:14 DEBUG] transformed Y278Mf.SPC -> Y278MF.SPC
[Status 15:27:14 INFO] data for Y278 transferred to science data processing
[Tidy 15:27:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:27:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:27:14 INFO] resetting WatchDogTimer
[Status 15:27:14 INFO] Starting Set [AERI set: name Z278, 6 scans, 0 angle, D16300 command]
[Ingest 15:27:14 INFO] Sending XML status message
[Status 15:27:14 INFO] Mirror angle: 0
[Mirror 15:27:14 INFO] rotating to position Z
[Status 15:27:15 INFO] .SET file for ACQ96 ready
[Ingest 15:27:15 INFO] Starting acquisition
[Status 15:27:16 INFO] reading housekeeping
[Status 15:27:33 INFO] acquire complete
[Status 15:27:34 INFO] writing housekeeping
[Sequencer 15:27:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:27:34 INFO] incremented Z scene to 278 completed views
[Sequencer 15:27:34 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:27:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:27:34 INFO] incremented to [AERI set: name H279, 6 scans, 60 angle, D22500 command] set
[sigmove 15:27:34 INFO] Z278.SIG(18)
[sigmove 15:27:34 DEBUG] transformed Z278Ma.SPC -> Z278MA.SPC
[sigmove 15:27:34 DEBUG] transformed Z278Mb.SPC -> Z278MB.SPC
[sigmove 15:27:34 DEBUG] transformed Z278Mc.SPC -> Z278MC.SPC
[sigmove 15:27:34 DEBUG] transformed Z278Md.SPC -> Z278MD.SPC
[sigmove 15:27:34 DEBUG] transformed Z278Me.SPC -> Z278ME.SPC
[sigmove 15:27:34 DEBUG] transformed Z278Mf.SPC -> Z278MF.SPC
[Status 15:27:34 INFO] data for Z278 transferred to science data processing
[Tidy 15:27:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:27:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:27:34 INFO] resetting WatchDogTimer
[Status 15:27:34 INFO] Starting Set [AERI set: name H279, 6 scans, 60 angle, D22500 command]
[Ingest 15:27:34 INFO] Sending XML status message
[Status 15:27:34 INFO] Mirror angle: 60
[Mirror 15:27:35 INFO] rotating to position H
[Status 15:27:36 INFO] .SET file for ACQ96 ready
[Ingest 15:27:36 INFO] Starting acquisition
[Status 15:27:36 INFO] reading housekeeping
[Status 15:27:54 INFO] acquire complete
[Status 15:27:55 INFO] writing housekeeping
[Sequencer 15:27:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:27:55 INFO] incremented H scene to 279 completed views
[Sequencer 15:27:55 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:27:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:27:55 INFO] incremented to [AERI set: name A279, 6 scans, 120 angle, D28300 command] set
[sigmove 15:27:55 INFO] H279.SIG(18)
[sigmove 15:27:55 DEBUG] transformed H279Ma.SPC -> H279MA.SPC
[sigmove 15:27:55 DEBUG] transformed H279Mb.SPC -> H279MB.SPC
[sigmove 15:27:55 DEBUG] transformed H279Mc.SPC -> H279MC.SPC
[sigmove 15:27:55 DEBUG] transformed H279Md.SPC -> H279MD.SPC
[sigmove 15:27:55 DEBUG] transformed H279Me.SPC -> H279ME.SPC
[sigmove 15:27:55 DEBUG] transformed H279Mf.SPC -> H279MF.SPC
[Status 15:27:55 INFO] data for H279 transferred to science data processing
[Tidy 15:27:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:27:55 INFO] A277.FIN(19),H277.FIN(19),S277.FIN(19),T277.FIN(19),U277.FIN(19),V277.FIN(19),W277.FIN(19),X277.FIN(19),Y277.FIN(19),Z277.FIN(19),A278.FIN(19),H278.FIN(19),S278.FIN(19),T278.FIN(19),U278.FIN(19),V278.FIN(19),W278.FIN(19),X278.FIN(19),Y278.FIN(19),Z278.FIN(19)
[sigmove 15:27:55 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:27:55 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:28:00 DEBUG] done zipping
[WatchDog 15:28:00 INFO] resetting WatchDogTimer
[Status 15:28:01 INFO] Starting Set [AERI set: name A279, 6 scans, 120 angle, D28300 command]
[Ingest 15:28:01 INFO] Sending XML status message
[Status 15:28:01 INFO] Mirror angle: 120
[Mirror 15:28:01 INFO] rotating to position A
[Status 15:28:02 INFO] .SET file for ACQ96 ready
[Ingest 15:28:02 INFO] Starting acquisition
[Status 15:28:03 INFO] reading housekeeping
[Status 15:28:20 INFO] acquire complete
[Status 15:28:21 INFO] writing housekeeping
[Sequencer 15:28:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:28:21 INFO] incremented A scene to 279 completed views
[Sequencer 15:28:21 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:28:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:28:21 INFO] incremented to [AERI set: name S279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:28:21 INFO] A279.SIG(18)
[sigmove 15:28:21 DEBUG] transformed A279Ma.SPC -> A279MA.SPC
[sigmove 15:28:21 DEBUG] transformed A279Mb.SPC -> A279MB.SPC
[sigmove 15:28:21 DEBUG] transformed A279Mc.SPC -> A279MC.SPC
[sigmove 15:28:21 DEBUG] transformed A279Md.SPC -> A279MD.SPC
[sigmove 15:28:21 DEBUG] transformed A279Me.SPC -> A279ME.SPC
[sigmove 15:28:21 DEBUG] transformed A279Mf.SPC -> A279MF.SPC
[Status 15:28:21 INFO] data for A279 transferred to science data processing
[Tidy 15:28:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:28:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:28:21 INFO] resetting WatchDogTimer
[Status 15:28:21 INFO] Starting Set [AERI set: name S279, 6 scans, 0 angle, D16300 command]
[Ingest 15:28:21 INFO] Sending XML status message
[Status 15:28:21 INFO] Mirror angle: 0
[Mirror 15:28:22 INFO] rotating to position S
[Status 15:28:23 INFO] .SET file for ACQ96 ready
[Ingest 15:28:23 INFO] Starting acquisition
[Status 15:28:24 INFO] reading housekeeping
[Status 15:28:41 INFO] acquire complete
[Status 15:28:42 INFO] writing housekeeping
[Sequencer 15:28:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:28:42 INFO] incremented S scene to 279 completed views
[Sequencer 15:28:42 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:28:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:28:42 INFO] incremented to [AERI set: name T279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:28:42 INFO] S279.SIG(18)
[sigmove 15:28:42 DEBUG] transformed S279Ma.SPC -> S279MA.SPC
[sigmove 15:28:42 DEBUG] transformed S279Mb.SPC -> S279MB.SPC
[sigmove 15:28:42 DEBUG] transformed S279Mc.SPC -> S279MC.SPC
[sigmove 15:28:42 DEBUG] transformed S279Md.SPC -> S279MD.SPC
[sigmove 15:28:42 DEBUG] transformed S279Me.SPC -> S279ME.SPC
[sigmove 15:28:42 DEBUG] transformed S279Mf.SPC -> S279MF.SPC
[Status 15:28:42 INFO] data for S279 transferred to science data processing
[Tidy 15:28:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:28:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:28:42 INFO] resetting WatchDogTimer
[Status 15:28:43 INFO] Starting Set [AERI set: name T279, 6 scans, 0 angle, D16300 command]
[Ingest 15:28:43 INFO] Sending XML status message
[Status 15:28:43 INFO] Mirror angle: 0
[Mirror 15:28:43 INFO] rotating to position T
[Status 15:28:44 INFO] .SET file for ACQ96 ready
[Ingest 15:28:44 INFO] Starting acquisition
[Status 15:28:44 INFO] reading housekeeping
[Status 15:29:02 INFO] acquire complete
[Status 15:29:02 INFO] writing housekeeping
[Sequencer 15:29:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:29:02 INFO] incremented T scene to 279 completed views
[Sequencer 15:29:02 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:29:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:29:02 INFO] incremented to [AERI set: name U279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:29:02 INFO] T279.SIG(18)
[sigmove 15:29:02 DEBUG] transformed T279Ma.SPC -> T279MA.SPC
[sigmove 15:29:02 DEBUG] transformed T279Mb.SPC -> T279MB.SPC
[sigmove 15:29:02 DEBUG] transformed T279Mc.SPC -> T279MC.SPC
[sigmove 15:29:02 DEBUG] transformed T279Md.SPC -> T279MD.SPC
[sigmove 15:29:02 DEBUG] transformed T279Me.SPC -> T279ME.SPC
[sigmove 15:29:02 DEBUG] transformed T279Mf.SPC -> T279MF.SPC
[Status 15:29:02 INFO] data for T279 transferred to science data processing
[Tidy 15:29:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:29:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:29:03 INFO] resetting WatchDogTimer
[Status 15:29:03 INFO] Starting Set [AERI set: name U279, 6 scans, 0 angle, D16300 command]
[Ingest 15:29:03 INFO] Sending XML status message
[Status 15:29:03 INFO] Mirror angle: 0
[Mirror 15:29:03 INFO] rotating to position U
[Status 15:29:04 INFO] .SET file for ACQ96 ready
[Ingest 15:29:04 INFO] Starting acquisition
[Status 15:29:04 INFO] reading housekeeping
[Status 15:29:22 INFO] acquire complete
[Status 15:29:23 INFO] writing housekeeping
[Sequencer 15:29:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:29:23 INFO] incremented U scene to 279 completed views
[Sequencer 15:29:23 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:29:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:29:23 INFO] incremented to [AERI set: name V279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:29:23 INFO] U279.SIG(18)
[sigmove 15:29:23 DEBUG] transformed U279Ma.SPC -> U279MA.SPC
[sigmove 15:29:23 DEBUG] transformed U279Mb.SPC -> U279MB.SPC
[sigmove 15:29:23 DEBUG] transformed U279Mc.SPC -> U279MC.SPC
[sigmove 15:29:23 DEBUG] transformed U279Md.SPC -> U279MD.SPC
[sigmove 15:29:23 DEBUG] transformed U279Me.SPC -> U279ME.SPC
[sigmove 15:29:23 DEBUG] transformed U279Mf.SPC -> U279MF.SPC
[Status 15:29:23 INFO] data for U279 transferred to science data processing
[Tidy 15:29:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:29:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:29:23 INFO] resetting WatchDogTimer
[Status 15:29:23 INFO] Starting Set [AERI set: name V279, 6 scans, 0 angle, D16300 command]
[Ingest 15:29:23 INFO] Sending XML status message
[Status 15:29:23 INFO] Mirror angle: 0
[Mirror 15:29:23 INFO] rotating to position V
[Status 15:29:24 INFO] .SET file for ACQ96 ready
[Ingest 15:29:24 INFO] Starting acquisition
[Status 15:29:25 INFO] reading housekeeping
[Status 15:29:42 INFO] acquire complete
[Status 15:29:43 INFO] writing housekeeping
[Sequencer 15:29:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:29:43 INFO] incremented V scene to 279 completed views
[Sequencer 15:29:43 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:29:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:29:43 INFO] incremented to [AERI set: name W279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:29:43 INFO] V279.SIG(18)
[sigmove 15:29:43 DEBUG] transformed V279Ma.SPC -> V279MA.SPC
[sigmove 15:29:43 DEBUG] transformed V279Mb.SPC -> V279MB.SPC
[sigmove 15:29:43 DEBUG] transformed V279Mc.SPC -> V279MC.SPC
[sigmove 15:29:43 DEBUG] transformed V279Md.SPC -> V279MD.SPC
[sigmove 15:29:43 DEBUG] transformed V279Me.SPC -> V279ME.SPC
[sigmove 15:29:43 DEBUG] transformed V279Mf.SPC -> V279MF.SPC
[Status 15:29:43 INFO] data for V279 transferred to science data processing
[Tidy 15:29:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:29:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:29:43 INFO] resetting WatchDogTimer
[Status 15:29:43 INFO] Starting Set [AERI set: name W279, 6 scans, 0 angle, D16300 command]
[Ingest 15:29:43 INFO] Sending XML status message
[Status 15:29:43 INFO] Mirror angle: 0
[Mirror 15:29:44 INFO] rotating to position W
[Status 15:29:44 INFO] .SET file for ACQ96 ready
[Ingest 15:29:44 INFO] Starting acquisition
[Status 15:29:45 INFO] reading housekeeping
[Status 15:30:02 INFO] acquire complete
[Status 15:30:03 INFO] writing housekeeping
[Sequencer 15:30:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:30:03 INFO] incremented W scene to 279 completed views
[Sequencer 15:30:03 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:30:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:30:03 INFO] incremented to [AERI set: name X279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:30:03 INFO] W279.SIG(18)
[sigmove 15:30:03 DEBUG] transformed W279Ma.SPC -> W279MA.SPC
[sigmove 15:30:03 DEBUG] transformed W279Mb.SPC -> W279MB.SPC
[sigmove 15:30:03 DEBUG] transformed W279Mc.SPC -> W279MC.SPC
[sigmove 15:30:03 DEBUG] transformed W279Md.SPC -> W279MD.SPC
[sigmove 15:30:03 DEBUG] transformed W279Me.SPC -> W279ME.SPC
[sigmove 15:30:03 DEBUG] transformed W279Mf.SPC -> W279MF.SPC
[Status 15:30:03 INFO] data for W279 transferred to science data processing
[Tidy 15:30:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:30:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:30:03 INFO] resetting WatchDogTimer
[Status 15:30:04 INFO] Starting Set [AERI set: name X279, 6 scans, 0 angle, D16300 command]
[Ingest 15:30:04 INFO] Sending XML status message
[Status 15:30:04 INFO] Mirror angle: 0
[Mirror 15:30:04 INFO] rotating to position X
[Status 15:30:05 INFO] .SET file for ACQ96 ready
[Ingest 15:30:05 INFO] Starting acquisition
[Status 15:30:07 INFO] reading housekeeping
[Status 15:30:23 INFO] acquire complete
[Status 15:30:24 INFO] writing housekeeping
[Sequencer 15:30:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:30:24 INFO] incremented X scene to 279 completed views
[Sequencer 15:30:24 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:30:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:30:24 INFO] incremented to [AERI set: name Y279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:30:24 INFO] X279.SIG(18)
[sigmove 15:30:24 DEBUG] transformed X279Ma.SPC -> X279MA.SPC
[sigmove 15:30:24 DEBUG] transformed X279Mb.SPC -> X279MB.SPC
[sigmove 15:30:24 DEBUG] transformed X279Mc.SPC -> X279MC.SPC
[sigmove 15:30:24 DEBUG] transformed X279Md.SPC -> X279MD.SPC
[sigmove 15:30:24 DEBUG] transformed X279Me.SPC -> X279ME.SPC
[sigmove 15:30:24 DEBUG] transformed X279Mf.SPC -> X279MF.SPC
[Status 15:30:24 INFO] data for X279 transferred to science data processing
[Tidy 15:30:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:30:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:30:24 INFO] resetting WatchDogTimer
[Status 15:30:25 INFO] Starting Set [AERI set: name Y279, 6 scans, 0 angle, D16300 command]
[Ingest 15:30:25 INFO] Sending XML status message
[Status 15:30:25 INFO] Mirror angle: 0
[Mirror 15:30:25 INFO] rotating to position Y
[Status 15:30:26 INFO] .SET file for ACQ96 ready
[Ingest 15:30:26 INFO] Starting acquisition
[Status 15:30:26 INFO] reading housekeeping
[Status 15:30:44 INFO] acquire complete
[Status 15:30:45 INFO] writing housekeeping
[Sequencer 15:30:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:30:45 INFO] incremented Y scene to 279 completed views
[Sequencer 15:30:45 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:30:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:30:45 INFO] incremented to [AERI set: name Z279, 6 scans, 0 angle, D16300 command] set
[sigmove 15:30:45 INFO] Y279.SIG(18)
[sigmove 15:30:45 DEBUG] transformed Y279Ma.SPC -> Y279MA.SPC
[sigmove 15:30:45 DEBUG] transformed Y279Mb.SPC -> Y279MB.SPC
[sigmove 15:30:45 DEBUG] transformed Y279Mc.SPC -> Y279MC.SPC
[sigmove 15:30:45 DEBUG] transformed Y279Md.SPC -> Y279MD.SPC
[sigmove 15:30:45 DEBUG] transformed Y279Me.SPC -> Y279ME.SPC
[sigmove 15:30:45 DEBUG] transformed Y279Mf.SPC -> Y279MF.SPC
[Status 15:30:45 INFO] data for Y279 transferred to science data processing
[Tidy 15:30:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:30:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:30:45 INFO] resetting WatchDogTimer
[Status 15:30:45 INFO] Starting Set [AERI set: name Z279, 6 scans, 0 angle, D16300 command]
[Ingest 15:30:45 INFO] Sending XML status message
[Status 15:30:45 INFO] Mirror angle: 0
[Mirror 15:30:45 INFO] rotating to position Z
[Status 15:30:46 INFO] .SET file for ACQ96 ready
[Ingest 15:30:46 INFO] Starting acquisition
[Status 15:30:46 INFO] reading housekeeping
[Status 15:31:04 INFO] acquire complete
[Status 15:31:05 INFO] writing housekeeping
[Sequencer 15:31:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:31:05 INFO] incremented Z scene to 279 completed views
[Sequencer 15:31:05 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:31:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:31:05 INFO] incremented to [AERI set: name A280, 6 scans, 120 angle, D28300 command] set
[sigmove 15:31:05 INFO] Z279.SIG(18)
[sigmove 15:31:05 DEBUG] transformed Z279Ma.SPC -> Z279MA.SPC
[sigmove 15:31:05 DEBUG] transformed Z279Mb.SPC -> Z279MB.SPC
[sigmove 15:31:05 DEBUG] transformed Z279Mc.SPC -> Z279MC.SPC
[sigmove 15:31:05 DEBUG] transformed Z279Md.SPC -> Z279MD.SPC
[sigmove 15:31:05 DEBUG] transformed Z279Me.SPC -> Z279ME.SPC
[sigmove 15:31:05 DEBUG] transformed Z279Mf.SPC -> Z279MF.SPC
[Status 15:31:05 INFO] data for Z279 transferred to science data processing
[Tidy 15:31:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:31:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:31:05 INFO] resetting WatchDogTimer
[Status 15:31:05 INFO] Starting Set [AERI set: name A280, 6 scans, 120 angle, D28300 command]
[Ingest 15:31:05 INFO] Sending XML status message
[Status 15:31:05 INFO] Mirror angle: 120
[Mirror 15:31:05 INFO] rotating to position A
[Status 15:31:07 INFO] .SET file for ACQ96 ready
[Ingest 15:31:07 INFO] Starting acquisition
[Status 15:31:08 INFO] reading housekeeping
[Status 15:31:25 INFO] acquire complete
[Status 15:31:26 INFO] writing housekeeping
[Sequencer 15:31:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:31:26 INFO] incremented A scene to 280 completed views
[Sequencer 15:31:26 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:31:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:31:26 INFO] incremented to [AERI set: name H280, 6 scans, 60 angle, D22500 command] set
[sigmove 15:31:26 INFO] A280.SIG(18)
[sigmove 15:31:26 DEBUG] transformed A280Ma.SPC -> A280MA.SPC
[sigmove 15:31:26 DEBUG] transformed A280Mb.SPC -> A280MB.SPC
[sigmove 15:31:26 DEBUG] transformed A280Mc.SPC -> A280MC.SPC
[sigmove 15:31:26 DEBUG] transformed A280Md.SPC -> A280MD.SPC
[sigmove 15:31:26 DEBUG] transformed A280Me.SPC -> A280ME.SPC
[sigmove 15:31:26 DEBUG] transformed A280Mf.SPC -> A280MF.SPC
[Status 15:31:26 INFO] data for A280 transferred to science data processing
[Tidy 15:31:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:31:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:31:26 INFO] resetting WatchDogTimer
[Status 15:31:26 INFO] Starting Set [AERI set: name H280, 6 scans, 60 angle, D22500 command]
[Ingest 15:31:26 INFO] Sending XML status message
[Status 15:31:26 INFO] Mirror angle: 60
[Mirror 15:31:27 INFO] rotating to position H
[Status 15:31:28 INFO] .SET file for ACQ96 ready
[Ingest 15:31:28 INFO] Starting acquisition
[Status 15:31:28 INFO] reading housekeeping
[Status 15:31:46 INFO] acquire complete
[Status 15:31:47 INFO] writing housekeeping
[Sequencer 15:31:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:31:47 INFO] incremented H scene to 280 completed views
[Sequencer 15:31:47 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:31:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:31:47 INFO] incremented to [AERI set: name S280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:31:47 INFO] H280.SIG(18)
[sigmove 15:31:47 DEBUG] transformed H280Ma.SPC -> H280MA.SPC
[sigmove 15:31:47 DEBUG] transformed H280Mb.SPC -> H280MB.SPC
[sigmove 15:31:47 DEBUG] transformed H280Mc.SPC -> H280MC.SPC
[sigmove 15:31:47 DEBUG] transformed H280Md.SPC -> H280MD.SPC
[sigmove 15:31:47 DEBUG] transformed H280Me.SPC -> H280ME.SPC
[sigmove 15:31:47 DEBUG] transformed H280Mf.SPC -> H280MF.SPC
[Status 15:31:47 INFO] data for H280 transferred to science data processing
[Tidy 15:31:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:31:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:31:47 INFO] resetting WatchDogTimer
[Status 15:31:48 INFO] Starting Set [AERI set: name S280, 6 scans, 0 angle, D16300 command]
[Ingest 15:31:48 INFO] Sending XML status message
[Status 15:31:48 INFO] Mirror angle: 0
[Mirror 15:31:48 INFO] rotating to position S
[Status 15:31:49 INFO] .SET file for ACQ96 ready
[Ingest 15:31:49 INFO] Starting acquisition
[Status 15:31:50 INFO] reading housekeeping
[Status 15:32:08 INFO] acquire complete
[Status 15:32:09 INFO] writing housekeeping
[Sequencer 15:32:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:32:09 INFO] incremented S scene to 280 completed views
[Sequencer 15:32:09 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:32:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:32:09 INFO] incremented to [AERI set: name T280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:32:09 INFO] S280.SIG(18)
[sigmove 15:32:09 DEBUG] transformed S280Ma.SPC -> S280MA.SPC
[sigmove 15:32:09 DEBUG] transformed S280Mb.SPC -> S280MB.SPC
[sigmove 15:32:09 DEBUG] transformed S280Mc.SPC -> S280MC.SPC
[sigmove 15:32:09 DEBUG] transformed S280Md.SPC -> S280MD.SPC
[sigmove 15:32:09 DEBUG] transformed S280Me.SPC -> S280ME.SPC
[sigmove 15:32:09 DEBUG] transformed S280Mf.SPC -> S280MF.SPC
[Status 15:32:09 INFO] data for S280 transferred to science data processing
[Tidy 15:32:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:32:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:32:09 INFO] resetting WatchDogTimer
[Status 15:32:09 INFO] Starting Set [AERI set: name T280, 6 scans, 0 angle, D16300 command]
[Ingest 15:32:09 INFO] Sending XML status message
[Status 15:32:09 INFO] Mirror angle: 0
[Mirror 15:32:10 INFO] rotating to position T
[Status 15:32:10 INFO] .SET file for ACQ96 ready
[Ingest 15:32:10 INFO] Starting acquisition
[Status 15:32:11 INFO] reading housekeeping
[Status 15:32:28 INFO] acquire complete
[Status 15:32:29 INFO] writing housekeeping
[Sequencer 15:32:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:32:29 INFO] incremented T scene to 280 completed views
[Sequencer 15:32:29 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:32:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:32:29 INFO] incremented to [AERI set: name U280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:32:29 INFO] T280.SIG(18)
[sigmove 15:32:29 DEBUG] transformed T280Ma.SPC -> T280MA.SPC
[sigmove 15:32:29 DEBUG] transformed T280Mb.SPC -> T280MB.SPC
[sigmove 15:32:29 DEBUG] transformed T280Mc.SPC -> T280MC.SPC
[sigmove 15:32:29 DEBUG] transformed T280Md.SPC -> T280MD.SPC
[sigmove 15:32:29 DEBUG] transformed T280Me.SPC -> T280ME.SPC
[sigmove 15:32:29 DEBUG] transformed T280Mf.SPC -> T280MF.SPC
[Status 15:32:29 INFO] data for T280 transferred to science data processing
[Tidy 15:32:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:32:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:32:29 INFO] resetting WatchDogTimer
[Status 15:32:29 INFO] Starting Set [AERI set: name U280, 6 scans, 0 angle, D16300 command]
[Ingest 15:32:29 INFO] Sending XML status message
[Status 15:32:29 INFO] Mirror angle: 0
[Mirror 15:32:30 INFO] rotating to position U
[Status 15:32:30 INFO] .SET file for ACQ96 ready
[Ingest 15:32:30 INFO] Starting acquisition
[Status 15:32:31 INFO] reading housekeeping
[Status 15:32:48 INFO] acquire complete
[Status 15:32:49 INFO] writing housekeeping
[Sequencer 15:32:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:32:49 INFO] incremented U scene to 280 completed views
[Sequencer 15:32:49 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:32:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:32:49 INFO] incremented to [AERI set: name V280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:32:49 INFO] U280.SIG(18)
[sigmove 15:32:49 DEBUG] transformed U280Ma.SPC -> U280MA.SPC
[sigmove 15:32:49 DEBUG] transformed U280Mb.SPC -> U280MB.SPC
[sigmove 15:32:49 DEBUG] transformed U280Mc.SPC -> U280MC.SPC
[sigmove 15:32:49 DEBUG] transformed U280Md.SPC -> U280MD.SPC
[sigmove 15:32:49 DEBUG] transformed U280Me.SPC -> U280ME.SPC
[sigmove 15:32:49 DEBUG] transformed U280Mf.SPC -> U280MF.SPC
[Status 15:32:49 INFO] data for U280 transferred to science data processing
[Tidy 15:32:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:32:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:32:49 INFO] resetting WatchDogTimer
[Status 15:32:50 INFO] Starting Set [AERI set: name V280, 6 scans, 0 angle, D16300 command]
[Ingest 15:32:50 INFO] Sending XML status message
[Status 15:32:50 INFO] Mirror angle: 0
[Mirror 15:32:50 INFO] rotating to position V
[Status 15:32:50 INFO] .SET file for ACQ96 ready
[Ingest 15:32:51 INFO] Starting acquisition
[Status 15:32:51 INFO] reading housekeeping
[Status 15:33:08 INFO] acquire complete
[Status 15:33:09 INFO] writing housekeeping
[Sequencer 15:33:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:33:09 INFO] incremented V scene to 280 completed views
[Sequencer 15:33:09 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:33:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:33:09 INFO] incremented to [AERI set: name W280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:33:09 INFO] V280.SIG(18)
[sigmove 15:33:09 DEBUG] transformed V280Ma.SPC -> V280MA.SPC
[sigmove 15:33:09 DEBUG] transformed V280Mb.SPC -> V280MB.SPC
[sigmove 15:33:09 DEBUG] transformed V280Mc.SPC -> V280MC.SPC
[sigmove 15:33:09 DEBUG] transformed V280Md.SPC -> V280MD.SPC
[sigmove 15:33:09 DEBUG] transformed V280Me.SPC -> V280ME.SPC
[sigmove 15:33:09 DEBUG] transformed V280Mf.SPC -> V280MF.SPC
[Status 15:33:09 INFO] data for V280 transferred to science data processing
[Tidy 15:33:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:33:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:33:09 INFO] resetting WatchDogTimer
[Status 15:33:10 INFO] Starting Set [AERI set: name W280, 6 scans, 0 angle, D16300 command]
[Ingest 15:33:10 INFO] Sending XML status message
[Status 15:33:10 INFO] Mirror angle: 0
[Mirror 15:33:10 INFO] rotating to position W
[Status 15:33:11 INFO] .SET file for ACQ96 ready
[Ingest 15:33:11 INFO] Starting acquisition
[Status 15:33:11 INFO] reading housekeeping
[Status 15:33:29 INFO] acquire complete
[Status 15:33:30 INFO] writing housekeeping
[Sequencer 15:33:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:33:30 INFO] incremented W scene to 280 completed views
[Sequencer 15:33:30 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:33:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:33:30 INFO] incremented to [AERI set: name X280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:33:30 INFO] W280.SIG(18)
[sigmove 15:33:30 DEBUG] transformed W280Ma.SPC -> W280MA.SPC
[sigmove 15:33:30 DEBUG] transformed W280Mb.SPC -> W280MB.SPC
[sigmove 15:33:30 DEBUG] transformed W280Mc.SPC -> W280MC.SPC
[sigmove 15:33:30 DEBUG] transformed W280Md.SPC -> W280MD.SPC
[sigmove 15:33:30 DEBUG] transformed W280Me.SPC -> W280ME.SPC
[sigmove 15:33:30 DEBUG] transformed W280Mf.SPC -> W280MF.SPC
[Status 15:33:30 INFO] data for W280 transferred to science data processing
[Tidy 15:33:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:33:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:33:30 INFO] resetting WatchDogTimer
[Status 15:33:30 INFO] Starting Set [AERI set: name X280, 6 scans, 0 angle, D16300 command]
[Ingest 15:33:30 INFO] Sending XML status message
[Status 15:33:30 INFO] Mirror angle: 0
[Mirror 15:33:30 INFO] rotating to position X
[Status 15:33:31 INFO] .SET file for ACQ96 ready
[Ingest 15:33:31 INFO] Starting acquisition
[Status 15:33:31 INFO] reading housekeeping
[Status 15:33:49 INFO] acquire complete
[Status 15:33:50 INFO] writing housekeeping
[Sequencer 15:33:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:33:50 INFO] incremented X scene to 280 completed views
[Sequencer 15:33:50 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:33:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:33:50 INFO] incremented to [AERI set: name Y280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:33:50 INFO] X280.SIG(18)
[sigmove 15:33:50 DEBUG] transformed X280Ma.SPC -> X280MA.SPC
[sigmove 15:33:50 DEBUG] transformed X280Mb.SPC -> X280MB.SPC
[sigmove 15:33:50 DEBUG] transformed X280Mc.SPC -> X280MC.SPC
[sigmove 15:33:50 DEBUG] transformed X280Md.SPC -> X280MD.SPC
[sigmove 15:33:50 DEBUG] transformed X280Me.SPC -> X280ME.SPC
[sigmove 15:33:50 DEBUG] transformed X280Mf.SPC -> X280MF.SPC
[Status 15:33:50 INFO] data for X280 transferred to science data processing
[Tidy 15:33:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:33:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:33:50 INFO] resetting WatchDogTimer
[Status 15:33:50 INFO] Starting Set [AERI set: name Y280, 6 scans, 0 angle, D16300 command]
[Ingest 15:33:50 INFO] Sending XML status message
[Status 15:33:50 INFO] Mirror angle: 0
[Mirror 15:33:50 INFO] rotating to position Y
[Status 15:33:51 INFO] .SET file for ACQ96 ready
[Ingest 15:33:51 INFO] Starting acquisition
[Status 15:33:52 INFO] reading housekeeping
[Status 15:34:09 INFO] acquire complete
[Status 15:34:10 INFO] writing housekeeping
[Sequencer 15:34:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:34:10 INFO] incremented Y scene to 280 completed views
[Sequencer 15:34:10 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:34:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:34:10 INFO] incremented to [AERI set: name Z280, 6 scans, 0 angle, D16300 command] set
[sigmove 15:34:10 INFO] Y280.SIG(18)
[sigmove 15:34:10 DEBUG] transformed Y280Ma.SPC -> Y280MA.SPC
[sigmove 15:34:10 DEBUG] transformed Y280Mb.SPC -> Y280MB.SPC
[sigmove 15:34:10 DEBUG] transformed Y280Mc.SPC -> Y280MC.SPC
[sigmove 15:34:10 DEBUG] transformed Y280Md.SPC -> Y280MD.SPC
[sigmove 15:34:10 DEBUG] transformed Y280Me.SPC -> Y280ME.SPC
[sigmove 15:34:10 DEBUG] transformed Y280Mf.SPC -> Y280MF.SPC
[Status 15:34:10 INFO] data for Y280 transferred to science data processing
[Tidy 15:34:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:34:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:34:10 INFO] resetting WatchDogTimer
[Status 15:34:10 INFO] Starting Set [AERI set: name Z280, 6 scans, 0 angle, D16300 command]
[Ingest 15:34:10 INFO] Sending XML status message
[Status 15:34:10 INFO] Mirror angle: 0
[Mirror 15:34:11 INFO] rotating to position Z
[Status 15:34:11 INFO] .SET file for ACQ96 ready
[Ingest 15:34:11 INFO] Starting acquisition
[Status 15:34:12 INFO] reading housekeeping
[Status 15:34:29 INFO] acquire complete
[Status 15:34:30 INFO] writing housekeeping
[Sequencer 15:34:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:34:30 INFO] incremented Z scene to 280 completed views
[Sequencer 15:34:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:34:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:34:30 INFO] incremented to [AERI set: name H281, 6 scans, 60 angle, D22500 command] set
[sigmove 15:34:30 INFO] Z280.SIG(18)
[sigmove 15:34:30 DEBUG] transformed Z280Ma.SPC -> Z280MA.SPC
[sigmove 15:34:30 DEBUG] transformed Z280Mb.SPC -> Z280MB.SPC
[sigmove 15:34:30 DEBUG] transformed Z280Mc.SPC -> Z280MC.SPC
[sigmove 15:34:30 DEBUG] transformed Z280Md.SPC -> Z280MD.SPC
[sigmove 15:34:30 DEBUG] transformed Z280Me.SPC -> Z280ME.SPC
[sigmove 15:34:30 DEBUG] transformed Z280Mf.SPC -> Z280MF.SPC
[Status 15:34:30 INFO] data for Z280 transferred to science data processing
[Tidy 15:34:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:34:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:34:30 INFO] resetting WatchDogTimer
[Status 15:34:30 INFO] Starting Set [AERI set: name H281, 6 scans, 60 angle, D22500 command]
[Ingest 15:34:30 INFO] Sending XML status message
[Status 15:34:30 INFO] Mirror angle: 60
[Mirror 15:34:31 INFO] rotating to position H
[Status 15:34:32 INFO] .SET file for ACQ96 ready
[Ingest 15:34:32 INFO] Starting acquisition
[Status 15:34:32 INFO] reading housekeeping
[Status 15:34:50 INFO] acquire complete
[Status 15:34:51 INFO] writing housekeeping
[Sequencer 15:34:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:34:51 INFO] incremented H scene to 281 completed views
[Sequencer 15:34:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:34:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:34:51 INFO] incremented to [AERI set: name A281, 6 scans, 120 angle, D28300 command] set
[sigmove 15:34:51 INFO] H281.SIG(18)
[sigmove 15:34:51 DEBUG] transformed H281Ma.SPC -> H281MA.SPC
[sigmove 15:34:51 DEBUG] transformed H281Mb.SPC -> H281MB.SPC
[sigmove 15:34:51 DEBUG] transformed H281Mc.SPC -> H281MC.SPC
[sigmove 15:34:51 DEBUG] transformed H281Md.SPC -> H281MD.SPC
[sigmove 15:34:51 DEBUG] transformed H281Me.SPC -> H281ME.SPC
[sigmove 15:34:51 DEBUG] transformed H281Mf.SPC -> H281MF.SPC
[Status 15:34:51 INFO] data for H281 transferred to science data processing
[Tidy 15:34:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:34:52 INFO] A279.FIN(19),H279.FIN(19),S279.FIN(19),T279.FIN(19),U279.FIN(19),V279.FIN(19),W279.FIN(19),X279.FIN(19),Y279.FIN(19),Z279.FIN(19),A280.FIN(19),H280.FIN(19),S280.FIN(19),T280.FIN(19),U280.FIN(19),V280.FIN(19),W280.FIN(19),X280.FIN(19),Y280.FIN(19),Z280.FIN(19)
[sigmove 15:34:52 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:34:52 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:34:56 DEBUG] done zipping
[WatchDog 15:34:57 INFO] resetting WatchDogTimer
[Status 15:34:57 INFO] Starting Set [AERI set: name A281, 6 scans, 120 angle, D28300 command]
[Ingest 15:34:57 INFO] Sending XML status message
[Status 15:34:57 INFO] Mirror angle: 120
[Mirror 15:34:57 INFO] rotating to position A
[Status 15:34:58 INFO] .SET file for ACQ96 ready
[Ingest 15:34:59 INFO] Starting acquisition
[Status 15:34:59 INFO] reading housekeeping
[Status 15:35:16 INFO] acquire complete
[Status 15:35:17 INFO] writing housekeeping
[Sequencer 15:35:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:35:17 INFO] incremented A scene to 281 completed views
[Sequencer 15:35:17 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:35:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:35:17 INFO] incremented to [AERI set: name S281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:35:17 INFO] A281.SIG(18)
[sigmove 15:35:17 DEBUG] transformed A281Ma.SPC -> A281MA.SPC
[sigmove 15:35:17 DEBUG] transformed A281Mb.SPC -> A281MB.SPC
[sigmove 15:35:17 DEBUG] transformed A281Mc.SPC -> A281MC.SPC
[sigmove 15:35:17 DEBUG] transformed A281Md.SPC -> A281MD.SPC
[sigmove 15:35:17 DEBUG] transformed A281Me.SPC -> A281ME.SPC
[sigmove 15:35:17 DEBUG] transformed A281Mf.SPC -> A281MF.SPC
[Status 15:35:17 INFO] data for A281 transferred to science data processing
[Tidy 15:35:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:35:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:35:17 INFO] resetting WatchDogTimer
[Status 15:35:18 INFO] Starting Set [AERI set: name S281, 6 scans, 0 angle, D16300 command]
[Ingest 15:35:18 INFO] Sending XML status message
[Status 15:35:18 INFO] Mirror angle: 0
[Mirror 15:35:18 INFO] rotating to position S
[Status 15:35:19 INFO] .SET file for ACQ96 ready
[Ingest 15:35:20 INFO] Starting acquisition
[Status 15:35:20 INFO] reading housekeeping
[Status 15:35:38 INFO] acquire complete
[Status 15:35:39 INFO] writing housekeeping
[Sequencer 15:35:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:35:39 INFO] incremented S scene to 281 completed views
[Sequencer 15:35:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:35:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:35:39 INFO] incremented to [AERI set: name T281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:35:39 INFO] S281.SIG(18)
[sigmove 15:35:39 DEBUG] transformed S281Ma.SPC -> S281MA.SPC
[sigmove 15:35:39 DEBUG] transformed S281Mb.SPC -> S281MB.SPC
[sigmove 15:35:39 DEBUG] transformed S281Mc.SPC -> S281MC.SPC
[sigmove 15:35:39 DEBUG] transformed S281Md.SPC -> S281MD.SPC
[sigmove 15:35:39 DEBUG] transformed S281Me.SPC -> S281ME.SPC
[sigmove 15:35:39 DEBUG] transformed S281Mf.SPC -> S281MF.SPC
[Status 15:35:39 INFO] data for S281 transferred to science data processing
[Tidy 15:35:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:35:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:35:39 INFO] resetting WatchDogTimer
[Status 15:35:39 INFO] Starting Set [AERI set: name T281, 6 scans, 0 angle, D16300 command]
[Ingest 15:35:39 INFO] Sending XML status message
[Status 15:35:39 INFO] Mirror angle: 0
[Mirror 15:35:39 INFO] rotating to position T
[Status 15:35:40 INFO] .SET file for ACQ96 ready
[Ingest 15:35:40 INFO] Starting acquisition
[Status 15:35:41 INFO] reading housekeeping
[Status 15:35:58 INFO] acquire complete
[Status 15:35:59 INFO] writing housekeeping
[Sequencer 15:35:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:35:59 INFO] incremented T scene to 281 completed views
[Sequencer 15:35:59 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:35:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:35:59 INFO] incremented to [AERI set: name U281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:35:59 INFO] T281.SIG(18)
[sigmove 15:35:59 DEBUG] transformed T281Ma.SPC -> T281MA.SPC
[sigmove 15:35:59 DEBUG] transformed T281Mb.SPC -> T281MB.SPC
[sigmove 15:35:59 DEBUG] transformed T281Mc.SPC -> T281MC.SPC
[sigmove 15:35:59 DEBUG] transformed T281Md.SPC -> T281MD.SPC
[sigmove 15:35:59 DEBUG] transformed T281Me.SPC -> T281ME.SPC
[sigmove 15:35:59 DEBUG] transformed T281Mf.SPC -> T281MF.SPC
[Status 15:35:59 INFO] data for T281 transferred to science data processing
[Tidy 15:35:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:35:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:35:59 INFO] resetting WatchDogTimer
[Status 15:35:59 INFO] Starting Set [AERI set: name U281, 6 scans, 0 angle, D16300 command]
[Ingest 15:35:59 INFO] Sending XML status message
[Status 15:35:59 INFO] Mirror angle: 0
[Mirror 15:35:59 INFO] rotating to position U
[Status 15:36:00 INFO] .SET file for ACQ96 ready
[Ingest 15:36:00 INFO] Starting acquisition
[Status 15:36:01 INFO] reading housekeeping
[Status 15:36:18 INFO] acquire complete
[Status 15:36:19 INFO] writing housekeeping
[Sequencer 15:36:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:36:19 INFO] incremented U scene to 281 completed views
[Sequencer 15:36:19 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:36:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:36:19 INFO] incremented to [AERI set: name V281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:36:19 INFO] U281.SIG(18)
[sigmove 15:36:19 DEBUG] transformed U281Ma.SPC -> U281MA.SPC
[sigmove 15:36:19 DEBUG] transformed U281Mb.SPC -> U281MB.SPC
[sigmove 15:36:19 DEBUG] transformed U281Mc.SPC -> U281MC.SPC
[sigmove 15:36:19 DEBUG] transformed U281Md.SPC -> U281MD.SPC
[sigmove 15:36:19 DEBUG] transformed U281Me.SPC -> U281ME.SPC
[sigmove 15:36:19 DEBUG] transformed U281Mf.SPC -> U281MF.SPC
[Status 15:36:19 INFO] data for U281 transferred to science data processing
[Tidy 15:36:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:36:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:36:19 INFO] resetting WatchDogTimer
[Status 15:36:19 INFO] Starting Set [AERI set: name V281, 6 scans, 0 angle, D16300 command]
[Ingest 15:36:19 INFO] Sending XML status message
[Status 15:36:19 INFO] Mirror angle: 0
[Mirror 15:36:20 INFO] rotating to position V
[Status 15:36:20 INFO] .SET file for ACQ96 ready
[Ingest 15:36:21 INFO] Starting acquisition
[Status 15:36:21 INFO] reading housekeeping
[Status 15:36:38 INFO] acquire complete
[Status 15:36:39 INFO] writing housekeeping
[Sequencer 15:36:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:36:39 INFO] incremented V scene to 281 completed views
[Sequencer 15:36:39 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:36:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:36:39 INFO] incremented to [AERI set: name W281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:36:39 INFO] V281.SIG(18)
[sigmove 15:36:39 DEBUG] transformed V281Ma.SPC -> V281MA.SPC
[sigmove 15:36:39 DEBUG] transformed V281Mb.SPC -> V281MB.SPC
[sigmove 15:36:39 DEBUG] transformed V281Mc.SPC -> V281MC.SPC
[sigmove 15:36:39 DEBUG] transformed V281Md.SPC -> V281MD.SPC
[sigmove 15:36:39 DEBUG] transformed V281Me.SPC -> V281ME.SPC
[sigmove 15:36:39 DEBUG] transformed V281Mf.SPC -> V281MF.SPC
[Status 15:36:39 INFO] data for V281 transferred to science data processing
[Tidy 15:36:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:36:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:36:39 INFO] resetting WatchDogTimer
[Status 15:36:40 INFO] Starting Set [AERI set: name W281, 6 scans, 0 angle, D16300 command]
[Ingest 15:36:40 INFO] Sending XML status message
[Status 15:36:40 INFO] Mirror angle: 0
[Mirror 15:36:40 INFO] rotating to position W
[Status 15:36:40 INFO] .SET file for ACQ96 ready
[Ingest 15:36:41 INFO] Starting acquisition
[Status 15:36:41 INFO] reading housekeeping
[Status 15:36:58 INFO] acquire complete
[Status 15:36:59 INFO] writing housekeeping
[Sequencer 15:36:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:36:59 INFO] incremented W scene to 281 completed views
[Sequencer 15:36:59 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:36:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:36:59 INFO] incremented to [AERI set: name X281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:36:59 INFO] W281.SIG(18)
[sigmove 15:36:59 DEBUG] transformed W281Ma.SPC -> W281MA.SPC
[sigmove 15:36:59 DEBUG] transformed W281Mb.SPC -> W281MB.SPC
[sigmove 15:36:59 DEBUG] transformed W281Mc.SPC -> W281MC.SPC
[sigmove 15:36:59 DEBUG] transformed W281Md.SPC -> W281MD.SPC
[sigmove 15:36:59 DEBUG] transformed W281Me.SPC -> W281ME.SPC
[sigmove 15:36:59 DEBUG] transformed W281Mf.SPC -> W281MF.SPC
[Status 15:36:59 INFO] data for W281 transferred to science data processing
[Tidy 15:36:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:36:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:36:59 INFO] resetting WatchDogTimer
[Status 15:37:00 INFO] Starting Set [AERI set: name X281, 6 scans, 0 angle, D16300 command]
[Ingest 15:37:00 INFO] Sending XML status message
[Status 15:37:00 INFO] Mirror angle: 0
[Mirror 15:37:00 INFO] rotating to position X
[Status 15:37:01 INFO] .SET file for ACQ96 ready
[Ingest 15:37:01 INFO] Starting acquisition
[Status 15:37:01 INFO] reading housekeeping
[Status 15:37:19 INFO] acquire complete
[Status 15:37:20 INFO] writing housekeeping
[Sequencer 15:37:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:37:20 INFO] incremented X scene to 281 completed views
[Sequencer 15:37:20 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:37:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:37:20 INFO] incremented to [AERI set: name Y281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:37:20 INFO] X281.SIG(18)
[sigmove 15:37:20 DEBUG] transformed X281Ma.SPC -> X281MA.SPC
[sigmove 15:37:20 DEBUG] transformed X281Mb.SPC -> X281MB.SPC
[sigmove 15:37:20 DEBUG] transformed X281Mc.SPC -> X281MC.SPC
[sigmove 15:37:20 DEBUG] transformed X281Md.SPC -> X281MD.SPC
[sigmove 15:37:20 DEBUG] transformed X281Me.SPC -> X281ME.SPC
[sigmove 15:37:20 DEBUG] transformed X281Mf.SPC -> X281MF.SPC
[Status 15:37:20 INFO] data for X281 transferred to science data processing
[Tidy 15:37:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:37:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:37:20 INFO] resetting WatchDogTimer
[Status 15:37:20 INFO] Starting Set [AERI set: name Y281, 6 scans, 0 angle, D16300 command]
[Ingest 15:37:20 INFO] Sending XML status message
[Status 15:37:20 INFO] Mirror angle: 0
[Mirror 15:37:20 INFO] rotating to position Y
[Status 15:37:21 INFO] .SET file for ACQ96 ready
[Ingest 15:37:21 INFO] Starting acquisition
[Status 15:37:21 INFO] reading housekeeping
[Status 15:37:39 INFO] acquire complete
[Status 15:37:40 INFO] writing housekeeping
[Sequencer 15:37:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:37:40 INFO] incremented Y scene to 281 completed views
[Sequencer 15:37:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:37:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:37:40 INFO] incremented to [AERI set: name Z281, 6 scans, 0 angle, D16300 command] set
[sigmove 15:37:40 INFO] Y281.SIG(18)
[sigmove 15:37:40 DEBUG] transformed Y281Ma.SPC -> Y281MA.SPC
[sigmove 15:37:40 DEBUG] transformed Y281Mb.SPC -> Y281MB.SPC
[sigmove 15:37:40 DEBUG] transformed Y281Mc.SPC -> Y281MC.SPC
[sigmove 15:37:40 DEBUG] transformed Y281Md.SPC -> Y281MD.SPC
[sigmove 15:37:40 DEBUG] transformed Y281Me.SPC -> Y281ME.SPC
[sigmove 15:37:40 DEBUG] transformed Y281Mf.SPC -> Y281MF.SPC
[Status 15:37:40 INFO] data for Y281 transferred to science data processing
[Tidy 15:37:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:37:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:37:40 INFO] resetting WatchDogTimer
[Status 15:37:40 INFO] Starting Set [AERI set: name Z281, 6 scans, 0 angle, D16300 command]
[Ingest 15:37:40 INFO] Sending XML status message
[Status 15:37:40 INFO] Mirror angle: 0
[Mirror 15:37:40 INFO] rotating to position Z
[Status 15:37:41 INFO] .SET file for ACQ96 ready
[Ingest 15:37:41 INFO] Starting acquisition
[Status 15:37:42 INFO] reading housekeeping
[Status 15:37:59 INFO] acquire complete
[Status 15:38:00 INFO] writing housekeeping
[Sequencer 15:38:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:38:00 INFO] incremented Z scene to 281 completed views
[Sequencer 15:38:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:38:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:38:00 INFO] incremented to [AERI set: name A282, 6 scans, 120 angle, D28300 command] set
[sigmove 15:38:00 INFO] Z281.SIG(18)
[sigmove 15:38:00 DEBUG] transformed Z281Ma.SPC -> Z281MA.SPC
[sigmove 15:38:00 DEBUG] transformed Z281Mb.SPC -> Z281MB.SPC
[sigmove 15:38:00 DEBUG] transformed Z281Mc.SPC -> Z281MC.SPC
[sigmove 15:38:00 DEBUG] transformed Z281Md.SPC -> Z281MD.SPC
[sigmove 15:38:00 DEBUG] transformed Z281Me.SPC -> Z281ME.SPC
[sigmove 15:38:00 DEBUG] transformed Z281Mf.SPC -> Z281MF.SPC
[Status 15:38:00 INFO] data for Z281 transferred to science data processing
[Tidy 15:38:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:38:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:38:00 INFO] resetting WatchDogTimer
[Status 15:38:00 INFO] Starting Set [AERI set: name A282, 6 scans, 120 angle, D28300 command]
[Ingest 15:38:00 INFO] Sending XML status message
[Status 15:38:00 INFO] Mirror angle: 120
[Mirror 15:38:01 INFO] rotating to position A
[Status 15:38:02 INFO] .SET file for ACQ96 ready
[Ingest 15:38:02 INFO] Starting acquisition
[Status 15:38:03 INFO] reading housekeeping
[Status 15:38:20 INFO] acquire complete
[Status 15:38:21 INFO] writing housekeeping
[Sequencer 15:38:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:38:21 INFO] incremented A scene to 282 completed views
[Sequencer 15:38:21 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:38:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:38:21 INFO] incremented to [AERI set: name H282, 6 scans, 60 angle, D22500 command] set
[sigmove 15:38:21 INFO] A282.SIG(18)
[sigmove 15:38:21 DEBUG] transformed A282Ma.SPC -> A282MA.SPC
[sigmove 15:38:21 DEBUG] transformed A282Mb.SPC -> A282MB.SPC
[sigmove 15:38:21 DEBUG] transformed A282Mc.SPC -> A282MC.SPC
[sigmove 15:38:21 DEBUG] transformed A282Md.SPC -> A282MD.SPC
[sigmove 15:38:21 DEBUG] transformed A282Me.SPC -> A282ME.SPC
[sigmove 15:38:21 DEBUG] transformed A282Mf.SPC -> A282MF.SPC
[Status 15:38:21 INFO] data for A282 transferred to science data processing
[Tidy 15:38:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:38:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:38:21 INFO] resetting WatchDogTimer
[Status 15:38:22 INFO] Starting Set [AERI set: name H282, 6 scans, 60 angle, D22500 command]
[Ingest 15:38:22 INFO] Sending XML status message
[Status 15:38:22 INFO] Mirror angle: 60
[Mirror 15:38:22 INFO] rotating to position H
[Status 15:38:23 INFO] .SET file for ACQ96 ready
[Ingest 15:38:23 INFO] Starting acquisition
[Status 15:38:24 INFO] reading housekeeping
[Status 15:38:42 INFO] acquire complete
[Status 15:38:43 INFO] writing housekeeping
[Sequencer 15:38:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:38:43 INFO] incremented H scene to 282 completed views
[Sequencer 15:38:43 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:38:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:38:43 INFO] incremented to [AERI set: name S282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:38:43 INFO] H282.SIG(18)
[sigmove 15:38:43 DEBUG] transformed H282Ma.SPC -> H282MA.SPC
[sigmove 15:38:43 DEBUG] transformed H282Mb.SPC -> H282MB.SPC
[sigmove 15:38:43 DEBUG] transformed H282Mc.SPC -> H282MC.SPC
[sigmove 15:38:43 DEBUG] transformed H282Md.SPC -> H282MD.SPC
[sigmove 15:38:43 DEBUG] transformed H282Me.SPC -> H282ME.SPC
[sigmove 15:38:43 DEBUG] transformed H282Mf.SPC -> H282MF.SPC
[Status 15:38:43 INFO] data for H282 transferred to science data processing
[Tidy 15:38:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:38:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:38:43 INFO] resetting WatchDogTimer
[Status 15:38:43 INFO] Starting Set [AERI set: name S282, 6 scans, 0 angle, D16300 command]
[Ingest 15:38:43 INFO] Sending XML status message
[Status 15:38:43 INFO] Mirror angle: 0
[Mirror 15:38:43 INFO] rotating to position S
[Status 15:38:44 INFO] .SET file for ACQ96 ready
[Ingest 15:38:45 INFO] Starting acquisition
[Status 15:38:45 INFO] reading housekeeping
[Status 15:39:03 INFO] acquire complete
[Status 15:39:04 INFO] writing housekeeping
[Sequencer 15:39:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:39:04 INFO] incremented S scene to 282 completed views
[Sequencer 15:39:04 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:39:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:39:04 INFO] incremented to [AERI set: name T282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:39:04 INFO] S282.SIG(18)
[sigmove 15:39:04 DEBUG] transformed S282Ma.SPC -> S282MA.SPC
[sigmove 15:39:04 DEBUG] transformed S282Mb.SPC -> S282MB.SPC
[sigmove 15:39:04 DEBUG] transformed S282Mc.SPC -> S282MC.SPC
[sigmove 15:39:04 DEBUG] transformed S282Md.SPC -> S282MD.SPC
[sigmove 15:39:04 DEBUG] transformed S282Me.SPC -> S282ME.SPC
[sigmove 15:39:04 DEBUG] transformed S282Mf.SPC -> S282MF.SPC
[Status 15:39:04 INFO] data for S282 transferred to science data processing
[Tidy 15:39:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:39:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:39:04 INFO] resetting WatchDogTimer
[Status 15:39:04 INFO] Starting Set [AERI set: name T282, 6 scans, 0 angle, D16300 command]
[Ingest 15:39:04 INFO] Sending XML status message
[Status 15:39:04 INFO] Mirror angle: 0
[Mirror 15:39:05 INFO] rotating to position T
[Status 15:39:05 INFO] .SET file for ACQ96 ready
[Ingest 15:39:05 INFO] Starting acquisition
[Status 15:39:06 INFO] reading housekeeping
[Status 15:39:23 INFO] acquire complete
[Status 15:39:24 INFO] writing housekeeping
[Sequencer 15:39:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:39:24 INFO] incremented T scene to 282 completed views
[Sequencer 15:39:24 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:39:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:39:24 INFO] incremented to [AERI set: name U282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:39:24 INFO] T282.SIG(18)
[sigmove 15:39:24 DEBUG] transformed T282Ma.SPC -> T282MA.SPC
[sigmove 15:39:24 DEBUG] transformed T282Mb.SPC -> T282MB.SPC
[sigmove 15:39:24 DEBUG] transformed T282Mc.SPC -> T282MC.SPC
[sigmove 15:39:24 DEBUG] transformed T282Md.SPC -> T282MD.SPC
[sigmove 15:39:24 DEBUG] transformed T282Me.SPC -> T282ME.SPC
[sigmove 15:39:24 DEBUG] transformed T282Mf.SPC -> T282MF.SPC
[Status 15:39:24 INFO] data for T282 transferred to science data processing
[Tidy 15:39:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:39:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:39:24 INFO] resetting WatchDogTimer
[Status 15:39:25 INFO] Starting Set [AERI set: name U282, 6 scans, 0 angle, D16300 command]
[Ingest 15:39:25 INFO] Sending XML status message
[Status 15:39:25 INFO] Mirror angle: 0
[Mirror 15:39:25 INFO] rotating to position U
[Status 15:39:26 INFO] .SET file for ACQ96 ready
[Ingest 15:39:26 INFO] Starting acquisition
[Status 15:39:26 INFO] reading housekeeping
[Status 15:39:44 INFO] acquire complete
[Status 15:39:45 INFO] writing housekeeping
[Sequencer 15:39:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:39:45 INFO] incremented U scene to 282 completed views
[Sequencer 15:39:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:39:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:39:45 INFO] incremented to [AERI set: name V282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:39:45 INFO] U282.SIG(18)
[sigmove 15:39:45 DEBUG] transformed U282Ma.SPC -> U282MA.SPC
[sigmove 15:39:45 DEBUG] transformed U282Mb.SPC -> U282MB.SPC
[sigmove 15:39:45 DEBUG] transformed U282Mc.SPC -> U282MC.SPC
[sigmove 15:39:45 DEBUG] transformed U282Md.SPC -> U282MD.SPC
[sigmove 15:39:45 DEBUG] transformed U282Me.SPC -> U282ME.SPC
[sigmove 15:39:45 DEBUG] transformed U282Mf.SPC -> U282MF.SPC
[Status 15:39:45 INFO] data for U282 transferred to science data processing
[Tidy 15:39:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:39:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:39:45 INFO] resetting WatchDogTimer
[Status 15:39:46 INFO] Starting Set [AERI set: name V282, 6 scans, 0 angle, D16300 command]
[Ingest 15:39:46 INFO] Sending XML status message
[Status 15:39:46 INFO] Mirror angle: 0
[Mirror 15:39:46 INFO] rotating to position V
[Status 15:39:47 INFO] .SET file for ACQ96 ready
[Ingest 15:39:47 INFO] Starting acquisition
[Status 15:39:47 INFO] reading housekeeping
[Status 15:40:05 INFO] acquire complete
[Status 15:40:06 INFO] writing housekeeping
[Sequencer 15:40:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:40:06 INFO] incremented V scene to 282 completed views
[Sequencer 15:40:06 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:40:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:40:06 INFO] incremented to [AERI set: name W282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:40:06 INFO] V282.SIG(18)
[sigmove 15:40:06 DEBUG] transformed V282Ma.SPC -> V282MA.SPC
[sigmove 15:40:06 DEBUG] transformed V282Mb.SPC -> V282MB.SPC
[sigmove 15:40:06 DEBUG] transformed V282Mc.SPC -> V282MC.SPC
[sigmove 15:40:06 DEBUG] transformed V282Md.SPC -> V282MD.SPC
[sigmove 15:40:06 DEBUG] transformed V282Me.SPC -> V282ME.SPC
[sigmove 15:40:06 DEBUG] transformed V282Mf.SPC -> V282MF.SPC
[Status 15:40:06 INFO] data for V282 transferred to science data processing
[Tidy 15:40:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:40:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:40:06 INFO] resetting WatchDogTimer
[Status 15:40:06 INFO] Starting Set [AERI set: name W282, 6 scans, 0 angle, D16300 command]
[Ingest 15:40:06 INFO] Sending XML status message
[Status 15:40:06 INFO] Mirror angle: 0
[Mirror 15:40:06 INFO] rotating to position W
[Status 15:40:07 INFO] .SET file for ACQ96 ready
[Ingest 15:40:07 INFO] Starting acquisition
[Status 15:40:08 INFO] reading housekeeping
[Status 15:40:25 INFO] acquire complete
[Status 15:40:26 INFO] writing housekeeping
[Sequencer 15:40:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:40:26 INFO] incremented W scene to 282 completed views
[Sequencer 15:40:26 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:40:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:40:26 INFO] incremented to [AERI set: name X282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:40:26 INFO] W282.SIG(18)
[sigmove 15:40:26 DEBUG] transformed W282Ma.SPC -> W282MA.SPC
[sigmove 15:40:26 DEBUG] transformed W282Mb.SPC -> W282MB.SPC
[sigmove 15:40:26 DEBUG] transformed W282Mc.SPC -> W282MC.SPC
[sigmove 15:40:26 DEBUG] transformed W282Md.SPC -> W282MD.SPC
[sigmove 15:40:26 DEBUG] transformed W282Me.SPC -> W282ME.SPC
[sigmove 15:40:26 DEBUG] transformed W282Mf.SPC -> W282MF.SPC
[Status 15:40:26 INFO] data for W282 transferred to science data processing
[Tidy 15:40:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:40:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:40:26 INFO] resetting WatchDogTimer
[Status 15:40:26 INFO] Starting Set [AERI set: name X282, 6 scans, 0 angle, D16300 command]
[Ingest 15:40:26 INFO] Sending XML status message
[Status 15:40:26 INFO] Mirror angle: 0
[Mirror 15:40:27 INFO] rotating to position X
[Status 15:40:27 INFO] .SET file for ACQ96 ready
[Ingest 15:40:27 INFO] Starting acquisition
[Status 15:40:28 INFO] reading housekeeping
[Status 15:40:45 INFO] acquire complete
[Status 15:40:46 INFO] writing housekeeping
[Sequencer 15:40:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:40:46 INFO] incremented X scene to 282 completed views
[Sequencer 15:40:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:40:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:40:46 INFO] incremented to [AERI set: name Y282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:40:46 INFO] X282.SIG(18)
[sigmove 15:40:46 DEBUG] transformed X282Ma.SPC -> X282MA.SPC
[sigmove 15:40:46 DEBUG] transformed X282Mb.SPC -> X282MB.SPC
[sigmove 15:40:46 DEBUG] transformed X282Mc.SPC -> X282MC.SPC
[sigmove 15:40:46 DEBUG] transformed X282Md.SPC -> X282MD.SPC
[sigmove 15:40:46 DEBUG] transformed X282Me.SPC -> X282ME.SPC
[sigmove 15:40:46 DEBUG] transformed X282Mf.SPC -> X282MF.SPC
[Status 15:40:46 INFO] data for X282 transferred to science data processing
[Tidy 15:40:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:40:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:40:46 INFO] resetting WatchDogTimer
[Status 15:40:46 INFO] Starting Set [AERI set: name Y282, 6 scans, 0 angle, D16300 command]
[Ingest 15:40:46 INFO] Sending XML status message
[Status 15:40:46 INFO] Mirror angle: 0
[Mirror 15:40:47 INFO] rotating to position Y
[Status 15:40:47 INFO] .SET file for ACQ96 ready
[Ingest 15:40:47 INFO] Starting acquisition
[Status 15:40:48 INFO] reading housekeeping
[Status 15:41:05 INFO] acquire complete
[Status 15:41:06 INFO] writing housekeeping
[Sequencer 15:41:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:41:06 INFO] incremented Y scene to 282 completed views
[Sequencer 15:41:06 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:41:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:41:06 INFO] incremented to [AERI set: name Z282, 6 scans, 0 angle, D16300 command] set
[sigmove 15:41:06 INFO] Y282.SIG(18)
[sigmove 15:41:06 DEBUG] transformed Y282Ma.SPC -> Y282MA.SPC
[sigmove 15:41:06 DEBUG] transformed Y282Mb.SPC -> Y282MB.SPC
[sigmove 15:41:06 DEBUG] transformed Y282Mc.SPC -> Y282MC.SPC
[sigmove 15:41:06 DEBUG] transformed Y282Md.SPC -> Y282MD.SPC
[sigmove 15:41:06 DEBUG] transformed Y282Me.SPC -> Y282ME.SPC
[sigmove 15:41:06 DEBUG] transformed Y282Mf.SPC -> Y282MF.SPC
[Status 15:41:06 INFO] data for Y282 transferred to science data processing
[Tidy 15:41:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:41:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:41:06 INFO] resetting WatchDogTimer
[Status 15:41:07 INFO] Starting Set [AERI set: name Z282, 6 scans, 0 angle, D16300 command]
[Ingest 15:41:07 INFO] Sending XML status message
[Status 15:41:07 INFO] Mirror angle: 0
[Mirror 15:41:07 INFO] rotating to position Z
[Status 15:41:07 INFO] .SET file for ACQ96 ready
[Ingest 15:41:08 INFO] Starting acquisition
[Status 15:41:08 INFO] reading housekeeping
[Status 15:41:25 INFO] acquire complete
[Status 15:41:26 INFO] writing housekeeping
[Sequencer 15:41:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:41:26 INFO] incremented Z scene to 282 completed views
[Sequencer 15:41:26 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:41:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:41:26 INFO] incremented to [AERI set: name H283, 6 scans, 60 angle, D22500 command] set
[sigmove 15:41:26 INFO] Z282.SIG(18)
[sigmove 15:41:26 DEBUG] transformed Z282Ma.SPC -> Z282MA.SPC
[sigmove 15:41:26 DEBUG] transformed Z282Mb.SPC -> Z282MB.SPC
[sigmove 15:41:26 DEBUG] transformed Z282Mc.SPC -> Z282MC.SPC
[sigmove 15:41:26 DEBUG] transformed Z282Md.SPC -> Z282MD.SPC
[sigmove 15:41:26 DEBUG] transformed Z282Me.SPC -> Z282ME.SPC
[sigmove 15:41:26 DEBUG] transformed Z282Mf.SPC -> Z282MF.SPC
[Status 15:41:26 INFO] data for Z282 transferred to science data processing
[Tidy 15:41:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:41:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:41:26 INFO] resetting WatchDogTimer
[Status 15:41:27 INFO] Starting Set [AERI set: name H283, 6 scans, 60 angle, D22500 command]
[Ingest 15:41:27 INFO] Sending XML status message
[Status 15:41:27 INFO] Mirror angle: 60
[Mirror 15:41:27 INFO] rotating to position H
[Status 15:41:28 INFO] .SET file for ACQ96 ready
[Ingest 15:41:28 INFO] Starting acquisition
[Status 15:41:29 INFO] reading housekeeping
[Status 15:41:47 INFO] acquire complete
[Status 15:41:48 INFO] writing housekeeping
[Sequencer 15:41:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:41:48 INFO] incremented H scene to 283 completed views
[Sequencer 15:41:48 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:41:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:41:48 INFO] incremented to [AERI set: name A283, 6 scans, 120 angle, D28300 command] set
[sigmove 15:41:48 INFO] H283.SIG(18)
[sigmove 15:41:48 DEBUG] transformed H283Ma.SPC -> H283MA.SPC
[sigmove 15:41:48 DEBUG] transformed H283Mb.SPC -> H283MB.SPC
[sigmove 15:41:48 DEBUG] transformed H283Mc.SPC -> H283MC.SPC
[sigmove 15:41:48 DEBUG] transformed H283Md.SPC -> H283MD.SPC
[sigmove 15:41:48 DEBUG] transformed H283Me.SPC -> H283ME.SPC
[sigmove 15:41:48 DEBUG] transformed H283Mf.SPC -> H283MF.SPC
[Status 15:41:48 INFO] data for H283 transferred to science data processing
[Tidy 15:41:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:41:48 INFO] A281.FIN(19),H281.FIN(19),S281.FIN(19),T281.FIN(19),U281.FIN(19),V281.FIN(19),W281.FIN(19),X281.FIN(19),Y281.FIN(19),Z281.FIN(19),A282.FIN(19),H282.FIN(19),S282.FIN(19),T282.FIN(19),U282.FIN(19),V282.FIN(19),W282.FIN(19),X282.FIN(19),Y282.FIN(19),Z282.FIN(19)
[sigmove 15:41:48 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:41:48 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:41:53 DEBUG] done zipping
[WatchDog 15:41:53 INFO] resetting WatchDogTimer
[Status 15:41:53 INFO] Starting Set [AERI set: name A283, 6 scans, 120 angle, D28300 command]
[Ingest 15:41:53 INFO] Sending XML status message
[Status 15:41:53 INFO] Mirror angle: 120
[Mirror 15:41:54 INFO] rotating to position A
[Status 15:41:55 INFO] .SET file for ACQ96 ready
[Ingest 15:41:55 INFO] Starting acquisition
[Status 15:41:56 INFO] reading housekeeping
[Status 15:42:14 INFO] acquire complete
[Status 15:42:15 INFO] writing housekeeping
[Sequencer 15:42:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:42:15 INFO] incremented A scene to 283 completed views
[Sequencer 15:42:15 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:42:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:42:15 INFO] incremented to [AERI set: name S283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:42:15 INFO] A283.SIG(18)
[sigmove 15:42:15 DEBUG] transformed A283Ma.SPC -> A283MA.SPC
[sigmove 15:42:15 DEBUG] transformed A283Mb.SPC -> A283MB.SPC
[sigmove 15:42:15 DEBUG] transformed A283Mc.SPC -> A283MC.SPC
[sigmove 15:42:15 DEBUG] transformed A283Md.SPC -> A283MD.SPC
[sigmove 15:42:15 DEBUG] transformed A283Me.SPC -> A283ME.SPC
[sigmove 15:42:15 DEBUG] transformed A283Mf.SPC -> A283MF.SPC
[Status 15:42:15 INFO] data for A283 transferred to science data processing
[Tidy 15:42:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:42:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:42:15 INFO] resetting WatchDogTimer
[Status 15:42:15 INFO] Starting Set [AERI set: name S283, 6 scans, 0 angle, D16300 command]
[Ingest 15:42:15 INFO] Sending XML status message
[Status 15:42:15 INFO] Mirror angle: 0
[Mirror 15:42:15 INFO] rotating to position S
[Status 15:42:17 INFO] .SET file for ACQ96 ready
[Ingest 15:42:17 INFO] Starting acquisition
[Status 15:42:18 INFO] reading housekeeping
[Status 15:42:35 INFO] acquire complete
[Status 15:42:36 INFO] writing housekeeping
[Sequencer 15:42:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:42:36 INFO] incremented S scene to 283 completed views
[Sequencer 15:42:36 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:42:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:42:36 INFO] incremented to [AERI set: name T283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:42:36 INFO] S283.SIG(18)
[sigmove 15:42:36 DEBUG] transformed S283Ma.SPC -> S283MA.SPC
[sigmove 15:42:36 DEBUG] transformed S283Mb.SPC -> S283MB.SPC
[sigmove 15:42:36 DEBUG] transformed S283Mc.SPC -> S283MC.SPC
[sigmove 15:42:36 DEBUG] transformed S283Md.SPC -> S283MD.SPC
[sigmove 15:42:36 DEBUG] transformed S283Me.SPC -> S283ME.SPC
[sigmove 15:42:36 DEBUG] transformed S283Mf.SPC -> S283MF.SPC
[Status 15:42:36 INFO] data for S283 transferred to science data processing
[Tidy 15:42:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:42:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:42:36 INFO] resetting WatchDogTimer
[Status 15:42:36 INFO] Starting Set [AERI set: name T283, 6 scans, 0 angle, D16300 command]
[Ingest 15:42:36 INFO] Sending XML status message
[Status 15:42:36 INFO] Mirror angle: 0
[Mirror 15:42:37 INFO] rotating to position T
[Status 15:42:37 INFO] .SET file for ACQ96 ready
[Ingest 15:42:37 INFO] Starting acquisition
[Status 15:42:38 INFO] reading housekeeping
[Status 15:42:55 INFO] acquire complete
[Status 15:42:56 INFO] writing housekeeping
[Sequencer 15:42:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:42:56 INFO] incremented T scene to 283 completed views
[Sequencer 15:42:56 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:42:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:42:56 INFO] incremented to [AERI set: name U283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:42:56 INFO] T283.SIG(18)
[sigmove 15:42:56 DEBUG] transformed T283Ma.SPC -> T283MA.SPC
[sigmove 15:42:56 DEBUG] transformed T283Mb.SPC -> T283MB.SPC
[sigmove 15:42:56 DEBUG] transformed T283Mc.SPC -> T283MC.SPC
[sigmove 15:42:56 DEBUG] transformed T283Md.SPC -> T283MD.SPC
[sigmove 15:42:56 DEBUG] transformed T283Me.SPC -> T283ME.SPC
[sigmove 15:42:56 DEBUG] transformed T283Mf.SPC -> T283MF.SPC
[Status 15:42:56 INFO] data for T283 transferred to science data processing
[Tidy 15:42:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:42:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:42:56 INFO] resetting WatchDogTimer
[Status 15:42:57 INFO] Starting Set [AERI set: name U283, 6 scans, 0 angle, D16300 command]
[Ingest 15:42:57 INFO] Sending XML status message
[Status 15:42:57 INFO] Mirror angle: 0
[Mirror 15:42:57 INFO] rotating to position U
[Status 15:42:58 INFO] .SET file for ACQ96 ready
[Ingest 15:42:58 INFO] Starting acquisition
[Status 15:42:58 INFO] reading housekeeping
[Status 15:43:17 INFO] acquire complete
[Status 15:43:17 INFO] writing housekeeping
[Sequencer 15:43:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:43:17 INFO] incremented U scene to 283 completed views
[Sequencer 15:43:17 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:43:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:43:17 INFO] incremented to [AERI set: name V283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:43:17 INFO] U283.SIG(18)
[sigmove 15:43:17 DEBUG] transformed U283Ma.SPC -> U283MA.SPC
[sigmove 15:43:17 DEBUG] transformed U283Mb.SPC -> U283MB.SPC
[sigmove 15:43:17 DEBUG] transformed U283Mc.SPC -> U283MC.SPC
[sigmove 15:43:17 DEBUG] transformed U283Md.SPC -> U283MD.SPC
[sigmove 15:43:17 DEBUG] transformed U283Me.SPC -> U283ME.SPC
[sigmove 15:43:17 DEBUG] transformed U283Mf.SPC -> U283MF.SPC
[Status 15:43:17 INFO] data for U283 transferred to science data processing
[Tidy 15:43:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:43:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:43:17 INFO] resetting WatchDogTimer
[Status 15:43:18 INFO] Starting Set [AERI set: name V283, 6 scans, 0 angle, D16300 command]
[Ingest 15:43:18 INFO] Sending XML status message
[Status 15:43:18 INFO] Mirror angle: 0
[Mirror 15:43:18 INFO] rotating to position V
[Status 15:43:19 INFO] .SET file for ACQ96 ready
[Ingest 15:43:19 INFO] Starting acquisition
[Status 15:43:20 INFO] reading housekeeping
[Status 15:43:38 INFO] acquire complete
[Status 15:43:39 INFO] writing housekeeping
[Sequencer 15:43:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:43:39 INFO] incremented V scene to 283 completed views
[Sequencer 15:43:39 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:43:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:43:39 INFO] incremented to [AERI set: name W283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:43:39 INFO] V283.SIG(18)
[sigmove 15:43:39 DEBUG] transformed V283Ma.SPC -> V283MA.SPC
[sigmove 15:43:39 DEBUG] transformed V283Mb.SPC -> V283MB.SPC
[sigmove 15:43:39 DEBUG] transformed V283Mc.SPC -> V283MC.SPC
[sigmove 15:43:39 DEBUG] transformed V283Md.SPC -> V283MD.SPC
[sigmove 15:43:39 DEBUG] transformed V283Me.SPC -> V283ME.SPC
[sigmove 15:43:39 DEBUG] transformed V283Mf.SPC -> V283MF.SPC
[Status 15:43:39 INFO] data for V283 transferred to science data processing
[Tidy 15:43:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:43:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:43:39 INFO] resetting WatchDogTimer
[Status 15:43:39 INFO] Starting Set [AERI set: name W283, 6 scans, 0 angle, D16300 command]
[Ingest 15:43:39 INFO] Sending XML status message
[Status 15:43:39 INFO] Mirror angle: 0
[Mirror 15:43:40 INFO] rotating to position W
[Status 15:43:40 INFO] .SET file for ACQ96 ready
[Ingest 15:43:40 INFO] Starting acquisition
[Status 15:43:41 INFO] reading housekeeping
[Status 15:43:58 INFO] acquire complete
[Status 15:43:59 INFO] writing housekeeping
[Sequencer 15:43:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:43:59 INFO] incremented W scene to 283 completed views
[Sequencer 15:43:59 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:43:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:43:59 INFO] incremented to [AERI set: name X283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:43:59 INFO] W283.SIG(18)
[sigmove 15:43:59 DEBUG] transformed W283Ma.SPC -> W283MA.SPC
[sigmove 15:43:59 DEBUG] transformed W283Mb.SPC -> W283MB.SPC
[sigmove 15:43:59 DEBUG] transformed W283Mc.SPC -> W283MC.SPC
[sigmove 15:43:59 DEBUG] transformed W283Md.SPC -> W283MD.SPC
[sigmove 15:43:59 DEBUG] transformed W283Me.SPC -> W283ME.SPC
[sigmove 15:43:59 DEBUG] transformed W283Mf.SPC -> W283MF.SPC
[Status 15:43:59 INFO] data for W283 transferred to science data processing
[Tidy 15:43:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:43:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:43:59 INFO] resetting WatchDogTimer
[Status 15:43:59 INFO] Starting Set [AERI set: name X283, 6 scans, 0 angle, D16300 command]
[Ingest 15:43:59 INFO] Sending XML status message
[Status 15:43:59 INFO] Mirror angle: 0
[Mirror 15:44:00 INFO] rotating to position X
[Status 15:44:00 INFO] .SET file for ACQ96 ready
[Ingest 15:44:00 INFO] Starting acquisition
[Status 15:44:01 INFO] reading housekeeping
[Status 15:44:18 INFO] acquire complete
[Status 15:44:19 INFO] writing housekeeping
[Sequencer 15:44:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:44:19 INFO] incremented X scene to 283 completed views
[Sequencer 15:44:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:44:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:44:19 INFO] incremented to [AERI set: name Y283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:44:19 INFO] X283.SIG(18)
[sigmove 15:44:19 DEBUG] transformed X283Ma.SPC -> X283MA.SPC
[sigmove 15:44:19 DEBUG] transformed X283Mb.SPC -> X283MB.SPC
[sigmove 15:44:19 DEBUG] transformed X283Mc.SPC -> X283MC.SPC
[sigmove 15:44:19 DEBUG] transformed X283Md.SPC -> X283MD.SPC
[sigmove 15:44:19 DEBUG] transformed X283Me.SPC -> X283ME.SPC
[sigmove 15:44:19 DEBUG] transformed X283Mf.SPC -> X283MF.SPC
[Status 15:44:19 INFO] data for X283 transferred to science data processing
[Tidy 15:44:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:44:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:44:19 INFO] resetting WatchDogTimer
[Status 15:44:20 INFO] Starting Set [AERI set: name Y283, 6 scans, 0 angle, D16300 command]
[Ingest 15:44:20 INFO] Sending XML status message
[Status 15:44:20 INFO] Mirror angle: 0
[Mirror 15:44:20 INFO] rotating to position Y
[Status 15:44:20 INFO] .SET file for ACQ96 ready
[Ingest 15:44:21 INFO] Starting acquisition
[Status 15:44:21 INFO] reading housekeeping
[Status 15:44:38 INFO] acquire complete
[Status 15:44:39 INFO] writing housekeeping
[Sequencer 15:44:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:44:39 INFO] incremented Y scene to 283 completed views
[Sequencer 15:44:39 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:44:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:44:39 INFO] incremented to [AERI set: name Z283, 6 scans, 0 angle, D16300 command] set
[sigmove 15:44:39 INFO] Y283.SIG(18)
[sigmove 15:44:39 DEBUG] transformed Y283Ma.SPC -> Y283MA.SPC
[sigmove 15:44:39 DEBUG] transformed Y283Mb.SPC -> Y283MB.SPC
[sigmove 15:44:39 DEBUG] transformed Y283Mc.SPC -> Y283MC.SPC
[sigmove 15:44:39 DEBUG] transformed Y283Md.SPC -> Y283MD.SPC
[sigmove 15:44:39 DEBUG] transformed Y283Me.SPC -> Y283ME.SPC
[sigmove 15:44:39 DEBUG] transformed Y283Mf.SPC -> Y283MF.SPC
[Status 15:44:39 INFO] data for Y283 transferred to science data processing
[Tidy 15:44:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:44:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:44:39 INFO] resetting WatchDogTimer
[Status 15:44:40 INFO] Starting Set [AERI set: name Z283, 6 scans, 0 angle, D16300 command]
[Ingest 15:44:40 INFO] Sending XML status message
[Status 15:44:40 INFO] Mirror angle: 0
[Mirror 15:44:40 INFO] rotating to position Z
[Status 15:44:41 INFO] .SET file for ACQ96 ready
[Ingest 15:44:41 INFO] Starting acquisition
[Status 15:44:41 INFO] reading housekeeping
[Status 15:44:59 INFO] acquire complete
[Status 15:45:00 INFO] writing housekeeping
[Sequencer 15:45:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:45:00 INFO] incremented Z scene to 283 completed views
[Sequencer 15:45:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:45:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:45:00 INFO] incremented to [AERI set: name A284, 6 scans, 120 angle, D28300 command] set
[sigmove 15:45:00 INFO] Z283.SIG(18)
[sigmove 15:45:00 DEBUG] transformed Z283Ma.SPC -> Z283MA.SPC
[sigmove 15:45:00 DEBUG] transformed Z283Mb.SPC -> Z283MB.SPC
[sigmove 15:45:00 DEBUG] transformed Z283Mc.SPC -> Z283MC.SPC
[sigmove 15:45:00 DEBUG] transformed Z283Md.SPC -> Z283MD.SPC
[sigmove 15:45:00 DEBUG] transformed Z283Me.SPC -> Z283ME.SPC
[sigmove 15:45:00 DEBUG] transformed Z283Mf.SPC -> Z283MF.SPC
[Status 15:45:00 INFO] data for Z283 transferred to science data processing
[Tidy 15:45:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:45:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:45:00 INFO] resetting WatchDogTimer
[Status 15:45:00 INFO] Starting Set [AERI set: name A284, 6 scans, 120 angle, D28300 command]
[Ingest 15:45:00 INFO] Sending XML status message
[Status 15:45:00 INFO] Mirror angle: 120
[Mirror 15:45:00 INFO] rotating to position A
[Status 15:45:02 INFO] .SET file for ACQ96 ready
[Ingest 15:45:02 INFO] Starting acquisition
[Status 15:45:02 INFO] reading housekeeping
[Status 15:45:20 INFO] acquire complete
[Status 15:45:21 INFO] writing housekeeping
[Sequencer 15:45:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:45:21 INFO] incremented A scene to 284 completed views
[Sequencer 15:45:21 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:45:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:45:21 INFO] incremented to [AERI set: name H284, 6 scans, 60 angle, D22500 command] set
[sigmove 15:45:21 INFO] A284.SIG(18)
[sigmove 15:45:21 DEBUG] transformed A284Ma.SPC -> A284MA.SPC
[sigmove 15:45:21 DEBUG] transformed A284Mb.SPC -> A284MB.SPC
[sigmove 15:45:21 DEBUG] transformed A284Mc.SPC -> A284MC.SPC
[sigmove 15:45:21 DEBUG] transformed A284Md.SPC -> A284MD.SPC
[sigmove 15:45:21 DEBUG] transformed A284Me.SPC -> A284ME.SPC
[sigmove 15:45:21 DEBUG] transformed A284Mf.SPC -> A284MF.SPC
[Status 15:45:21 INFO] data for A284 transferred to science data processing
[Tidy 15:45:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:45:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:45:21 INFO] resetting WatchDogTimer
[Status 15:45:21 INFO] Starting Set [AERI set: name H284, 6 scans, 60 angle, D22500 command]
[Ingest 15:45:21 INFO] Sending XML status message
[Status 15:45:21 INFO] Mirror angle: 60
[Mirror 15:45:22 INFO] rotating to position H
[Status 15:45:23 INFO] .SET file for ACQ96 ready
[Ingest 15:45:23 INFO] Starting acquisition
[Status 15:45:23 INFO] reading housekeeping
[Status 15:45:41 INFO] acquire complete
[Status 15:45:42 INFO] writing housekeeping
[Sequencer 15:45:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:45:42 INFO] incremented H scene to 284 completed views
[Sequencer 15:45:42 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:45:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:45:42 INFO] incremented to [AERI set: name S284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:45:42 INFO] H284.SIG(18)
[sigmove 15:45:42 DEBUG] transformed H284Ma.SPC -> H284MA.SPC
[sigmove 15:45:42 DEBUG] transformed H284Mb.SPC -> H284MB.SPC
[sigmove 15:45:42 DEBUG] transformed H284Mc.SPC -> H284MC.SPC
[sigmove 15:45:42 DEBUG] transformed H284Md.SPC -> H284MD.SPC
[sigmove 15:45:42 DEBUG] transformed H284Me.SPC -> H284ME.SPC
[sigmove 15:45:42 DEBUG] transformed H284Mf.SPC -> H284MF.SPC
[Status 15:45:42 INFO] data for H284 transferred to science data processing
[Tidy 15:45:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:45:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:45:42 INFO] resetting WatchDogTimer
[Status 15:45:43 INFO] Starting Set [AERI set: name S284, 6 scans, 0 angle, D16300 command]
[Ingest 15:45:43 INFO] Sending XML status message
[Status 15:45:43 INFO] Mirror angle: 0
[Mirror 15:45:43 INFO] rotating to position S
[Status 15:45:44 INFO] .SET file for ACQ96 ready
[Ingest 15:45:44 INFO] Starting acquisition
[Status 15:45:45 INFO] reading housekeeping
[Status 15:46:03 INFO] acquire complete
[Status 15:46:04 INFO] writing housekeeping
[Sequencer 15:46:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:46:04 INFO] incremented S scene to 284 completed views
[Sequencer 15:46:04 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:46:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:46:04 INFO] incremented to [AERI set: name T284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:46:04 INFO] S284.SIG(18)
[sigmove 15:46:04 DEBUG] transformed S284Ma.SPC -> S284MA.SPC
[sigmove 15:46:04 DEBUG] transformed S284Mb.SPC -> S284MB.SPC
[sigmove 15:46:04 DEBUG] transformed S284Mc.SPC -> S284MC.SPC
[sigmove 15:46:04 DEBUG] transformed S284Md.SPC -> S284MD.SPC
[sigmove 15:46:04 DEBUG] transformed S284Me.SPC -> S284ME.SPC
[sigmove 15:46:04 DEBUG] transformed S284Mf.SPC -> S284MF.SPC
[Status 15:46:04 INFO] data for S284 transferred to science data processing
[Tidy 15:46:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:46:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:46:04 INFO] resetting WatchDogTimer
[Status 15:46:04 INFO] Starting Set [AERI set: name T284, 6 scans, 0 angle, D16300 command]
[Ingest 15:46:04 INFO] Sending XML status message
[Status 15:46:04 INFO] Mirror angle: 0
[Mirror 15:46:04 INFO] rotating to position T
[Status 15:46:05 INFO] .SET file for ACQ96 ready
[Ingest 15:46:05 INFO] Starting acquisition
[Status 15:46:06 INFO] reading housekeeping
[Status 15:46:23 INFO] acquire complete
[Status 15:46:24 INFO] writing housekeeping
[Sequencer 15:46:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:46:24 INFO] incremented T scene to 284 completed views
[Sequencer 15:46:24 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:46:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:46:24 INFO] incremented to [AERI set: name U284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:46:24 INFO] T284.SIG(18)
[sigmove 15:46:24 DEBUG] transformed T284Ma.SPC -> T284MA.SPC
[sigmove 15:46:24 DEBUG] transformed T284Mb.SPC -> T284MB.SPC
[sigmove 15:46:24 DEBUG] transformed T284Mc.SPC -> T284MC.SPC
[sigmove 15:46:24 DEBUG] transformed T284Md.SPC -> T284MD.SPC
[sigmove 15:46:24 DEBUG] transformed T284Me.SPC -> T284ME.SPC
[sigmove 15:46:24 DEBUG] transformed T284Mf.SPC -> T284MF.SPC
[Status 15:46:24 INFO] data for T284 transferred to science data processing
[Tidy 15:46:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:46:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:46:24 INFO] resetting WatchDogTimer
[Status 15:46:24 INFO] Starting Set [AERI set: name U284, 6 scans, 0 angle, D16300 command]
[Ingest 15:46:24 INFO] Sending XML status message
[Status 15:46:24 INFO] Mirror angle: 0
[Mirror 15:46:24 INFO] rotating to position U
[Status 15:46:25 INFO] .SET file for ACQ96 ready
[Ingest 15:46:25 INFO] Starting acquisition
[Status 15:46:26 INFO] reading housekeeping
[Status 15:46:43 INFO] acquire complete
[Status 15:46:44 INFO] writing housekeeping
[Sequencer 15:46:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:46:44 INFO] incremented U scene to 284 completed views
[Sequencer 15:46:44 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:46:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:46:44 INFO] incremented to [AERI set: name V284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:46:44 INFO] U284.SIG(18)
[sigmove 15:46:44 DEBUG] transformed U284Ma.SPC -> U284MA.SPC
[sigmove 15:46:44 DEBUG] transformed U284Mb.SPC -> U284MB.SPC
[sigmove 15:46:44 DEBUG] transformed U284Mc.SPC -> U284MC.SPC
[sigmove 15:46:44 DEBUG] transformed U284Md.SPC -> U284MD.SPC
[sigmove 15:46:44 DEBUG] transformed U284Me.SPC -> U284ME.SPC
[sigmove 15:46:44 DEBUG] transformed U284Mf.SPC -> U284MF.SPC
[Status 15:46:44 INFO] data for U284 transferred to science data processing
[Tidy 15:46:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:46:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:46:44 INFO] resetting WatchDogTimer
[Status 15:46:44 INFO] Starting Set [AERI set: name V284, 6 scans, 0 angle, D16300 command]
[Ingest 15:46:44 INFO] Sending XML status message
[Status 15:46:44 INFO] Mirror angle: 0
[Mirror 15:46:45 INFO] rotating to position V
[Status 15:46:45 INFO] .SET file for ACQ96 ready
[Ingest 15:46:45 INFO] Starting acquisition
[Status 15:46:46 INFO] reading housekeeping
[Status 15:47:03 INFO] acquire complete
[Status 15:47:04 INFO] writing housekeeping
[Sequencer 15:47:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:47:04 INFO] incremented V scene to 284 completed views
[Sequencer 15:47:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:47:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:47:04 INFO] incremented to [AERI set: name W284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:47:04 INFO] V284.SIG(18)
[sigmove 15:47:04 DEBUG] transformed V284Ma.SPC -> V284MA.SPC
[sigmove 15:47:04 DEBUG] transformed V284Mb.SPC -> V284MB.SPC
[sigmove 15:47:04 DEBUG] transformed V284Mc.SPC -> V284MC.SPC
[sigmove 15:47:04 DEBUG] transformed V284Md.SPC -> V284MD.SPC
[sigmove 15:47:04 DEBUG] transformed V284Me.SPC -> V284ME.SPC
[sigmove 15:47:04 DEBUG] transformed V284Mf.SPC -> V284MF.SPC
[Status 15:47:04 INFO] data for V284 transferred to science data processing
[Tidy 15:47:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:47:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:47:04 INFO] resetting WatchDogTimer
[Status 15:47:04 INFO] Starting Set [AERI set: name W284, 6 scans, 0 angle, D16300 command]
[Ingest 15:47:04 INFO] Sending XML status message
[Status 15:47:04 INFO] Mirror angle: 0
[Mirror 15:47:05 INFO] rotating to position W
[Status 15:47:05 INFO] .SET file for ACQ96 ready
[Ingest 15:47:06 INFO] Starting acquisition
[Status 15:47:06 INFO] reading housekeeping
[Status 15:47:23 INFO] acquire complete
[Status 15:47:24 INFO] writing housekeeping
[Sequencer 15:47:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:47:24 INFO] incremented W scene to 284 completed views
[Sequencer 15:47:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:47:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:47:24 INFO] incremented to [AERI set: name X284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:47:24 INFO] W284.SIG(18)
[sigmove 15:47:24 DEBUG] transformed W284Ma.SPC -> W284MA.SPC
[sigmove 15:47:24 DEBUG] transformed W284Mb.SPC -> W284MB.SPC
[sigmove 15:47:24 DEBUG] transformed W284Mc.SPC -> W284MC.SPC
[sigmove 15:47:24 DEBUG] transformed W284Md.SPC -> W284MD.SPC
[sigmove 15:47:24 DEBUG] transformed W284Me.SPC -> W284ME.SPC
[sigmove 15:47:24 DEBUG] transformed W284Mf.SPC -> W284MF.SPC
[Status 15:47:24 INFO] data for W284 transferred to science data processing
[Tidy 15:47:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:47:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:47:24 INFO] resetting WatchDogTimer
[Status 15:47:25 INFO] Starting Set [AERI set: name X284, 6 scans, 0 angle, D16300 command]
[Ingest 15:47:25 INFO] Sending XML status message
[Status 15:47:25 INFO] Mirror angle: 0
[Mirror 15:47:25 INFO] rotating to position X
[Status 15:47:26 INFO] .SET file for ACQ96 ready
[Ingest 15:47:26 INFO] Starting acquisition
[Status 15:47:26 INFO] reading housekeeping
[Status 15:47:44 INFO] acquire complete
[Status 15:47:44 INFO] writing housekeeping
[Sequencer 15:47:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:47:44 INFO] incremented X scene to 284 completed views
[Sequencer 15:47:44 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:47:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:47:44 INFO] incremented to [AERI set: name Y284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:47:44 INFO] X284.SIG(18)
[sigmove 15:47:44 DEBUG] transformed X284Ma.SPC -> X284MA.SPC
[sigmove 15:47:44 DEBUG] transformed X284Mb.SPC -> X284MB.SPC
[sigmove 15:47:44 DEBUG] transformed X284Mc.SPC -> X284MC.SPC
[sigmove 15:47:44 DEBUG] transformed X284Md.SPC -> X284MD.SPC
[sigmove 15:47:44 DEBUG] transformed X284Me.SPC -> X284ME.SPC
[sigmove 15:47:45 DEBUG] transformed X284Mf.SPC -> X284MF.SPC
[Status 15:47:45 INFO] data for X284 transferred to science data processing
[Tidy 15:47:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:47:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:47:45 INFO] resetting WatchDogTimer
[Status 15:47:45 INFO] Starting Set [AERI set: name Y284, 6 scans, 0 angle, D16300 command]
[Ingest 15:47:45 INFO] Sending XML status message
[Status 15:47:45 INFO] Mirror angle: 0
[Mirror 15:47:45 INFO] rotating to position Y
[Status 15:47:46 INFO] .SET file for ACQ96 ready
[Ingest 15:47:46 INFO] Starting acquisition
[Status 15:47:46 INFO] reading housekeeping
[Status 15:48:04 INFO] acquire complete
[Status 15:48:05 INFO] writing housekeeping
[Sequencer 15:48:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:48:05 INFO] incremented Y scene to 284 completed views
[Sequencer 15:48:05 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:48:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:48:05 INFO] incremented to [AERI set: name Z284, 6 scans, 0 angle, D16300 command] set
[sigmove 15:48:05 INFO] Y284.SIG(18)
[sigmove 15:48:05 DEBUG] transformed Y284Ma.SPC -> Y284MA.SPC
[sigmove 15:48:05 DEBUG] transformed Y284Mb.SPC -> Y284MB.SPC
[sigmove 15:48:05 DEBUG] transformed Y284Mc.SPC -> Y284MC.SPC
[sigmove 15:48:05 DEBUG] transformed Y284Md.SPC -> Y284MD.SPC
[sigmove 15:48:05 DEBUG] transformed Y284Me.SPC -> Y284ME.SPC
[sigmove 15:48:05 DEBUG] transformed Y284Mf.SPC -> Y284MF.SPC
[Status 15:48:05 INFO] data for Y284 transferred to science data processing
[Tidy 15:48:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:48:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:48:05 INFO] resetting WatchDogTimer
[Status 15:48:05 INFO] Starting Set [AERI set: name Z284, 6 scans, 0 angle, D16300 command]
[Ingest 15:48:05 INFO] Sending XML status message
[Status 15:48:05 INFO] Mirror angle: 0
[Mirror 15:48:05 INFO] rotating to position Z
[Status 15:48:06 INFO] .SET file for ACQ96 ready
[Ingest 15:48:06 INFO] Starting acquisition
[Status 15:48:07 INFO] reading housekeeping
[Status 15:48:24 INFO] acquire complete
[Status 15:48:25 INFO] writing housekeeping
[Sequencer 15:48:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:48:25 INFO] incremented Z scene to 284 completed views
[Sequencer 15:48:25 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:48:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:48:25 INFO] incremented to [AERI set: name H285, 6 scans, 60 angle, D22500 command] set
[sigmove 15:48:25 INFO] Z284.SIG(18)
[sigmove 15:48:25 DEBUG] transformed Z284Ma.SPC -> Z284MA.SPC
[sigmove 15:48:25 DEBUG] transformed Z284Mb.SPC -> Z284MB.SPC
[sigmove 15:48:25 DEBUG] transformed Z284Mc.SPC -> Z284MC.SPC
[sigmove 15:48:25 DEBUG] transformed Z284Md.SPC -> Z284MD.SPC
[sigmove 15:48:25 DEBUG] transformed Z284Me.SPC -> Z284ME.SPC
[sigmove 15:48:25 DEBUG] transformed Z284Mf.SPC -> Z284MF.SPC
[Status 15:48:25 INFO] data for Z284 transferred to science data processing
[Tidy 15:48:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:48:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:48:25 INFO] resetting WatchDogTimer
[Status 15:48:25 INFO] Starting Set [AERI set: name H285, 6 scans, 60 angle, D22500 command]
[Ingest 15:48:25 INFO] Sending XML status message
[Status 15:48:25 INFO] Mirror angle: 60
[Mirror 15:48:26 INFO] rotating to position H
[Status 15:48:27 INFO] .SET file for ACQ96 ready
[Ingest 15:48:27 INFO] Starting acquisition
[Status 15:48:27 INFO] reading housekeeping
[Status 15:48:45 INFO] acquire complete
[Status 15:48:46 INFO] writing housekeeping
[Sequencer 15:48:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:48:46 INFO] incremented H scene to 285 completed views
[Sequencer 15:48:46 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:48:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:48:46 INFO] incremented to [AERI set: name A285, 6 scans, 120 angle, D28300 command] set
[sigmove 15:48:46 INFO] H285.SIG(18)
[sigmove 15:48:46 DEBUG] transformed H285Ma.SPC -> H285MA.SPC
[sigmove 15:48:46 DEBUG] transformed H285Mb.SPC -> H285MB.SPC
[sigmove 15:48:46 DEBUG] transformed H285Mc.SPC -> H285MC.SPC
[sigmove 15:48:46 DEBUG] transformed H285Md.SPC -> H285MD.SPC
[sigmove 15:48:46 DEBUG] transformed H285Me.SPC -> H285ME.SPC
[sigmove 15:48:46 DEBUG] transformed H285Mf.SPC -> H285MF.SPC
[Status 15:48:46 INFO] data for H285 transferred to science data processing
[Tidy 15:48:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:48:46 INFO] A283.FIN(19),H283.FIN(19),S283.FIN(19),T283.FIN(19),U283.FIN(19),V283.FIN(19),W283.FIN(19),X283.FIN(19),Y283.FIN(19),Z283.FIN(19),A284.FIN(19),H284.FIN(19),S284.FIN(19),T284.FIN(19),U284.FIN(19),V284.FIN(19),W284.FIN(19),X284.FIN(19),Y284.FIN(19),Z284.FIN(19)
[sigmove 15:48:46 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:48:46 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:48:51 DEBUG] done zipping
[WatchDog 15:48:52 INFO] resetting WatchDogTimer
[Status 15:48:52 INFO] Starting Set [AERI set: name A285, 6 scans, 120 angle, D28300 command]
[Ingest 15:48:52 INFO] Sending XML status message
[Status 15:48:52 INFO] Mirror angle: 120
[Mirror 15:48:52 INFO] rotating to position A
[Status 15:48:53 INFO] .SET file for ACQ96 ready
[Ingest 15:48:54 INFO] Starting acquisition
[Status 15:48:54 INFO] reading housekeeping
[Status 15:49:12 INFO] acquire complete
[Status 15:49:13 INFO] writing housekeeping
[Sequencer 15:49:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:49:13 INFO] incremented A scene to 285 completed views
[Sequencer 15:49:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:49:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:49:13 INFO] incremented to [AERI set: name S285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:49:13 INFO] A285.SIG(18)
[sigmove 15:49:13 DEBUG] transformed A285Ma.SPC -> A285MA.SPC
[sigmove 15:49:13 DEBUG] transformed A285Mb.SPC -> A285MB.SPC
[sigmove 15:49:13 DEBUG] transformed A285Mc.SPC -> A285MC.SPC
[sigmove 15:49:13 DEBUG] transformed A285Md.SPC -> A285MD.SPC
[sigmove 15:49:13 DEBUG] transformed A285Me.SPC -> A285ME.SPC
[sigmove 15:49:13 DEBUG] transformed A285Mf.SPC -> A285MF.SPC
[Status 15:49:13 INFO] data for A285 transferred to science data processing
[Tidy 15:49:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:49:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:49:13 INFO] resetting WatchDogTimer
[Status 15:49:13 INFO] Starting Set [AERI set: name S285, 6 scans, 0 angle, D16300 command]
[Ingest 15:49:13 INFO] Sending XML status message
[Status 15:49:13 INFO] Mirror angle: 0
[Mirror 15:49:14 INFO] rotating to position S
[Status 15:49:15 INFO] .SET file for ACQ96 ready
[Ingest 15:49:16 INFO] Starting acquisition
[Status 15:49:16 INFO] reading housekeeping
[Status 15:49:33 INFO] acquire complete
[Status 15:49:34 INFO] writing housekeeping
[Sequencer 15:49:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:49:34 INFO] incremented S scene to 285 completed views
[Sequencer 15:49:34 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:49:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:49:34 INFO] incremented to [AERI set: name T285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:49:34 INFO] S285.SIG(18)
[sigmove 15:49:34 DEBUG] transformed S285Ma.SPC -> S285MA.SPC
[sigmove 15:49:34 DEBUG] transformed S285Mb.SPC -> S285MB.SPC
[sigmove 15:49:34 DEBUG] transformed S285Mc.SPC -> S285MC.SPC
[sigmove 15:49:34 DEBUG] transformed S285Md.SPC -> S285MD.SPC
[sigmove 15:49:34 DEBUG] transformed S285Me.SPC -> S285ME.SPC
[sigmove 15:49:34 DEBUG] transformed S285Mf.SPC -> S285MF.SPC
[Status 15:49:34 INFO] data for S285 transferred to science data processing
[Tidy 15:49:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:49:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:49:34 INFO] resetting WatchDogTimer
[Status 15:49:35 INFO] Starting Set [AERI set: name T285, 6 scans, 0 angle, D16300 command]
[Ingest 15:49:35 INFO] Sending XML status message
[Status 15:49:35 INFO] Mirror angle: 0
[Mirror 15:49:35 INFO] rotating to position T
[Status 15:49:36 INFO] .SET file for ACQ96 ready
[Ingest 15:49:36 INFO] Starting acquisition
[Status 15:49:36 INFO] reading housekeeping
[Status 15:49:55 INFO] acquire complete
[Status 15:49:56 INFO] writing housekeeping
[Sequencer 15:49:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:49:56 INFO] incremented T scene to 285 completed views
[Sequencer 15:49:56 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:49:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:49:56 INFO] incremented to [AERI set: name U285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:49:56 INFO] T285.SIG(18)
[sigmove 15:49:56 DEBUG] transformed T285Ma.SPC -> T285MA.SPC
[sigmove 15:49:56 DEBUG] transformed T285Mb.SPC -> T285MB.SPC
[sigmove 15:49:56 DEBUG] transformed T285Mc.SPC -> T285MC.SPC
[sigmove 15:49:56 DEBUG] transformed T285Md.SPC -> T285MD.SPC
[sigmove 15:49:56 DEBUG] transformed T285Me.SPC -> T285ME.SPC
[sigmove 15:49:56 DEBUG] transformed T285Mf.SPC -> T285MF.SPC
[Status 15:49:56 INFO] data for T285 transferred to science data processing
[Tidy 15:49:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:49:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:49:56 INFO] resetting WatchDogTimer
[Status 15:49:56 INFO] Starting Set [AERI set: name U285, 6 scans, 0 angle, D16300 command]
[Ingest 15:49:56 INFO] Sending XML status message
[Status 15:49:56 INFO] Mirror angle: 0
[Mirror 15:49:56 INFO] rotating to position U
[Status 15:49:57 INFO] .SET file for ACQ96 ready
[Ingest 15:49:57 INFO] Starting acquisition
[Status 15:49:58 INFO] reading housekeeping
[Status 15:50:15 INFO] acquire complete
[Status 15:50:16 INFO] writing housekeeping
[Sequencer 15:50:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:50:16 INFO] incremented U scene to 285 completed views
[Sequencer 15:50:16 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:50:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:50:16 INFO] incremented to [AERI set: name V285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:50:16 INFO] U285.SIG(18)
[sigmove 15:50:16 DEBUG] transformed U285Ma.SPC -> U285MA.SPC
[sigmove 15:50:16 DEBUG] transformed U285Mb.SPC -> U285MB.SPC
[sigmove 15:50:16 DEBUG] transformed U285Mc.SPC -> U285MC.SPC
[sigmove 15:50:16 DEBUG] transformed U285Md.SPC -> U285MD.SPC
[sigmove 15:50:16 DEBUG] transformed U285Me.SPC -> U285ME.SPC
[sigmove 15:50:16 DEBUG] transformed U285Mf.SPC -> U285MF.SPC
[Status 15:50:16 INFO] data for U285 transferred to science data processing
[Tidy 15:50:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:50:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:50:16 INFO] resetting WatchDogTimer
[Status 15:50:16 INFO] Starting Set [AERI set: name V285, 6 scans, 0 angle, D16300 command]
[Ingest 15:50:16 INFO] Sending XML status message
[Status 15:50:16 INFO] Mirror angle: 0
[Mirror 15:50:17 INFO] rotating to position V
[Status 15:50:17 INFO] .SET file for ACQ96 ready
[Ingest 15:50:17 INFO] Starting acquisition
[Status 15:50:18 INFO] reading housekeeping
[Status 15:50:35 INFO] acquire complete
[Status 15:50:36 INFO] writing housekeeping
[Sequencer 15:50:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:50:36 INFO] incremented V scene to 285 completed views
[Sequencer 15:50:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:50:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:50:36 INFO] incremented to [AERI set: name W285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:50:36 INFO] V285.SIG(18)
[sigmove 15:50:36 DEBUG] transformed V285Ma.SPC -> V285MA.SPC
[sigmove 15:50:36 DEBUG] transformed V285Mb.SPC -> V285MB.SPC
[sigmove 15:50:36 DEBUG] transformed V285Mc.SPC -> V285MC.SPC
[sigmove 15:50:36 DEBUG] transformed V285Md.SPC -> V285MD.SPC
[sigmove 15:50:36 DEBUG] transformed V285Me.SPC -> V285ME.SPC
[sigmove 15:50:36 DEBUG] transformed V285Mf.SPC -> V285MF.SPC
[Status 15:50:36 INFO] data for V285 transferred to science data processing
[Tidy 15:50:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:50:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:50:36 INFO] resetting WatchDogTimer
[Status 15:50:36 INFO] Starting Set [AERI set: name W285, 6 scans, 0 angle, D16300 command]
[Ingest 15:50:36 INFO] Sending XML status message
[Status 15:50:36 INFO] Mirror angle: 0
[Mirror 15:50:37 INFO] rotating to position W
[Status 15:50:37 INFO] .SET file for ACQ96 ready
[Ingest 15:50:38 INFO] Starting acquisition
[Status 15:50:38 INFO] reading housekeeping
[Status 15:50:55 INFO] acquire complete
[Status 15:50:56 INFO] writing housekeeping
[Sequencer 15:50:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:50:56 INFO] incremented W scene to 285 completed views
[Sequencer 15:50:56 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:50:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:50:56 INFO] incremented to [AERI set: name X285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:50:56 INFO] W285.SIG(18)
[sigmove 15:50:56 DEBUG] transformed W285Ma.SPC -> W285MA.SPC
[sigmove 15:50:56 DEBUG] transformed W285Mb.SPC -> W285MB.SPC
[sigmove 15:50:56 DEBUG] transformed W285Mc.SPC -> W285MC.SPC
[sigmove 15:50:56 DEBUG] transformed W285Md.SPC -> W285MD.SPC
[sigmove 15:50:56 DEBUG] transformed W285Me.SPC -> W285ME.SPC
[sigmove 15:50:56 DEBUG] transformed W285Mf.SPC -> W285MF.SPC
[Status 15:50:56 INFO] data for W285 transferred to science data processing
[Tidy 15:50:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:50:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:50:56 INFO] resetting WatchDogTimer
[Status 15:50:57 INFO] Starting Set [AERI set: name X285, 6 scans, 0 angle, D16300 command]
[Ingest 15:50:57 INFO] Sending XML status message
[Status 15:50:57 INFO] Mirror angle: 0
[Mirror 15:50:57 INFO] rotating to position X
[Status 15:50:58 INFO] .SET file for ACQ96 ready
[Ingest 15:50:58 INFO] Starting acquisition
[Status 15:50:58 INFO] reading housekeeping
[Status 15:51:16 INFO] acquire complete
[Status 15:51:16 INFO] writing housekeeping
[Sequencer 15:51:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:51:16 INFO] incremented X scene to 285 completed views
[Sequencer 15:51:16 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:51:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:51:17 INFO] incremented to [AERI set: name Y285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:51:17 INFO] X285.SIG(18)
[sigmove 15:51:17 DEBUG] transformed X285Ma.SPC -> X285MA.SPC
[sigmove 15:51:17 DEBUG] transformed X285Mb.SPC -> X285MB.SPC
[sigmove 15:51:17 DEBUG] transformed X285Mc.SPC -> X285MC.SPC
[sigmove 15:51:17 DEBUG] transformed X285Md.SPC -> X285MD.SPC
[sigmove 15:51:17 DEBUG] transformed X285Me.SPC -> X285ME.SPC
[sigmove 15:51:17 DEBUG] transformed X285Mf.SPC -> X285MF.SPC
[Status 15:51:17 INFO] data for X285 transferred to science data processing
[Tidy 15:51:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:51:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:51:17 INFO] resetting WatchDogTimer
[Status 15:51:17 INFO] Starting Set [AERI set: name Y285, 6 scans, 0 angle, D16300 command]
[Ingest 15:51:17 INFO] Sending XML status message
[Status 15:51:17 INFO] Mirror angle: 0
[Mirror 15:51:17 INFO] rotating to position Y
[Status 15:51:18 INFO] .SET file for ACQ96 ready
[Ingest 15:51:18 INFO] Starting acquisition
[Status 15:51:18 INFO] reading housekeeping
[Status 15:51:36 INFO] acquire complete
[Status 15:51:37 INFO] writing housekeeping
[Sequencer 15:51:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:51:37 INFO] incremented Y scene to 285 completed views
[Sequencer 15:51:37 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:51:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:51:37 INFO] incremented to [AERI set: name Z285, 6 scans, 0 angle, D16300 command] set
[sigmove 15:51:37 INFO] Y285.SIG(18)
[sigmove 15:51:37 DEBUG] transformed Y285Ma.SPC -> Y285MA.SPC
[sigmove 15:51:37 DEBUG] transformed Y285Mb.SPC -> Y285MB.SPC
[sigmove 15:51:37 DEBUG] transformed Y285Mc.SPC -> Y285MC.SPC
[sigmove 15:51:37 DEBUG] transformed Y285Md.SPC -> Y285MD.SPC
[sigmove 15:51:37 DEBUG] transformed Y285Me.SPC -> Y285ME.SPC
[sigmove 15:51:37 DEBUG] transformed Y285Mf.SPC -> Y285MF.SPC
[Status 15:51:37 INFO] data for Y285 transferred to science data processing
[Tidy 15:51:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:51:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:51:37 INFO] resetting WatchDogTimer
[Status 15:51:37 INFO] Starting Set [AERI set: name Z285, 6 scans, 0 angle, D16300 command]
[Ingest 15:51:37 INFO] Sending XML status message
[Status 15:51:37 INFO] Mirror angle: 0
[Mirror 15:51:37 INFO] rotating to position Z
[Status 15:51:38 INFO] .SET file for ACQ96 ready
[Ingest 15:51:38 INFO] Starting acquisition
[Status 15:51:39 INFO] reading housekeeping
[Status 15:51:56 INFO] acquire complete
[Status 15:51:57 INFO] writing housekeeping
[Sequencer 15:51:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:51:57 INFO] incremented Z scene to 285 completed views
[Sequencer 15:51:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:51:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:51:57 INFO] incremented to [AERI set: name A286, 6 scans, 120 angle, D28300 command] set
[sigmove 15:51:57 INFO] Z285.SIG(18)
[sigmove 15:51:57 DEBUG] transformed Z285Ma.SPC -> Z285MA.SPC
[sigmove 15:51:57 DEBUG] transformed Z285Mb.SPC -> Z285MB.SPC
[sigmove 15:51:57 DEBUG] transformed Z285Mc.SPC -> Z285MC.SPC
[sigmove 15:51:57 DEBUG] transformed Z285Md.SPC -> Z285MD.SPC
[sigmove 15:51:57 DEBUG] transformed Z285Me.SPC -> Z285ME.SPC
[sigmove 15:51:57 DEBUG] transformed Z285Mf.SPC -> Z285MF.SPC
[Status 15:51:57 INFO] data for Z285 transferred to science data processing
[Tidy 15:51:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:51:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:51:57 INFO] resetting WatchDogTimer
[Status 15:51:57 INFO] Starting Set [AERI set: name A286, 6 scans, 120 angle, D28300 command]
[Ingest 15:51:57 INFO] Sending XML status message
[Status 15:51:57 INFO] Mirror angle: 120
[Mirror 15:51:58 INFO] rotating to position A
[Status 15:51:59 INFO] .SET file for ACQ96 ready
[Ingest 15:51:59 INFO] Starting acquisition
[Status 15:52:00 INFO] reading housekeeping
[Status 15:52:17 INFO] acquire complete
[Status 15:52:18 INFO] writing housekeeping
[Sequencer 15:52:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:52:18 INFO] incremented A scene to 286 completed views
[Sequencer 15:52:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:52:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:52:18 INFO] incremented to [AERI set: name H286, 6 scans, 60 angle, D22500 command] set
[sigmove 15:52:18 INFO] A286.SIG(18)
[sigmove 15:52:18 DEBUG] transformed A286Ma.SPC -> A286MA.SPC
[sigmove 15:52:18 DEBUG] transformed A286Mb.SPC -> A286MB.SPC
[sigmove 15:52:18 DEBUG] transformed A286Mc.SPC -> A286MC.SPC
[sigmove 15:52:18 DEBUG] transformed A286Md.SPC -> A286MD.SPC
[sigmove 15:52:18 DEBUG] transformed A286Me.SPC -> A286ME.SPC
[sigmove 15:52:18 DEBUG] transformed A286Mf.SPC -> A286MF.SPC
[Status 15:52:18 INFO] data for A286 transferred to science data processing
[Tidy 15:52:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:52:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:52:18 INFO] resetting WatchDogTimer
[Status 15:52:19 INFO] Starting Set [AERI set: name H286, 6 scans, 60 angle, D22500 command]
[Ingest 15:52:19 INFO] Sending XML status message
[Status 15:52:19 INFO] Mirror angle: 60
[Mirror 15:52:19 INFO] rotating to position H
[Status 15:52:20 INFO] .SET file for ACQ96 ready
[Ingest 15:52:20 INFO] Starting acquisition
[Status 15:52:21 INFO] reading housekeeping
[Status 15:52:39 INFO] acquire complete
[Status 15:52:40 INFO] writing housekeeping
[Sequencer 15:52:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:52:40 INFO] incremented H scene to 286 completed views
[Sequencer 15:52:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:52:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:52:40 INFO] incremented to [AERI set: name S286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:52:40 INFO] H286.SIG(18)
[sigmove 15:52:40 DEBUG] transformed H286Ma.SPC -> H286MA.SPC
[sigmove 15:52:40 DEBUG] transformed H286Mb.SPC -> H286MB.SPC
[sigmove 15:52:40 DEBUG] transformed H286Mc.SPC -> H286MC.SPC
[sigmove 15:52:40 DEBUG] transformed H286Md.SPC -> H286MD.SPC
[sigmove 15:52:40 DEBUG] transformed H286Me.SPC -> H286ME.SPC
[sigmove 15:52:40 DEBUG] transformed H286Mf.SPC -> H286MF.SPC
[Status 15:52:40 INFO] data for H286 transferred to science data processing
[Tidy 15:52:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:52:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:52:40 INFO] resetting WatchDogTimer
[Status 15:52:40 INFO] Starting Set [AERI set: name S286, 6 scans, 0 angle, D16300 command]
[Ingest 15:52:40 INFO] Sending XML status message
[Status 15:52:40 INFO] Mirror angle: 0
[Mirror 15:52:40 INFO] rotating to position S
[Status 15:52:41 INFO] .SET file for ACQ96 ready
[Ingest 15:52:42 INFO] Starting acquisition
[Status 15:52:42 INFO] reading housekeeping
[Status 15:53:00 INFO] acquire complete
[Status 15:53:01 INFO] writing housekeeping
[Sequencer 15:53:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:53:01 INFO] incremented S scene to 286 completed views
[Sequencer 15:53:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:53:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:53:01 INFO] incremented to [AERI set: name T286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:53:01 INFO] S286.SIG(18)
[sigmove 15:53:01 DEBUG] transformed S286Ma.SPC -> S286MA.SPC
[sigmove 15:53:01 DEBUG] transformed S286Mb.SPC -> S286MB.SPC
[sigmove 15:53:01 DEBUG] transformed S286Mc.SPC -> S286MC.SPC
[sigmove 15:53:01 DEBUG] transformed S286Md.SPC -> S286MD.SPC
[sigmove 15:53:01 DEBUG] transformed S286Me.SPC -> S286ME.SPC
[sigmove 15:53:01 DEBUG] transformed S286Mf.SPC -> S286MF.SPC
[Status 15:53:01 INFO] data for S286 transferred to science data processing
[Tidy 15:53:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:53:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:53:01 INFO] resetting WatchDogTimer
[Status 15:53:02 INFO] Starting Set [AERI set: name T286, 6 scans, 0 angle, D16300 command]
[Ingest 15:53:02 INFO] Sending XML status message
[Status 15:53:02 INFO] Mirror angle: 0
[Mirror 15:53:02 INFO] rotating to position T
[Status 15:53:02 INFO] .SET file for ACQ96 ready
[Ingest 15:53:03 INFO] Starting acquisition
[Status 15:53:03 INFO] reading housekeeping
[Status 15:53:21 INFO] acquire complete
[Status 15:53:22 INFO] writing housekeeping
[Sequencer 15:53:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:53:22 INFO] incremented T scene to 286 completed views
[Sequencer 15:53:22 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:53:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:53:22 INFO] incremented to [AERI set: name U286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:53:22 INFO] T286.SIG(18)
[sigmove 15:53:22 DEBUG] transformed T286Ma.SPC -> T286MA.SPC
[sigmove 15:53:22 DEBUG] transformed T286Mb.SPC -> T286MB.SPC
[sigmove 15:53:22 DEBUG] transformed T286Mc.SPC -> T286MC.SPC
[sigmove 15:53:22 DEBUG] transformed T286Md.SPC -> T286MD.SPC
[sigmove 15:53:22 DEBUG] transformed T286Me.SPC -> T286ME.SPC
[sigmove 15:53:22 DEBUG] transformed T286Mf.SPC -> T286MF.SPC
[Status 15:53:22 INFO] data for T286 transferred to science data processing
[Tidy 15:53:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:53:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:53:22 INFO] resetting WatchDogTimer
[Status 15:53:23 INFO] Starting Set [AERI set: name U286, 6 scans, 0 angle, D16300 command]
[Ingest 15:53:23 INFO] Sending XML status message
[Status 15:53:23 INFO] Mirror angle: 0
[Mirror 15:53:23 INFO] rotating to position U
[Status 15:53:23 INFO] .SET file for ACQ96 ready
[Ingest 15:53:24 INFO] Starting acquisition
[Status 15:53:24 INFO] reading housekeeping
[Status 15:53:41 INFO] acquire complete
[Status 15:53:42 INFO] writing housekeeping
[Sequencer 15:53:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:53:42 INFO] incremented U scene to 286 completed views
[Sequencer 15:53:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:53:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:53:42 INFO] incremented to [AERI set: name V286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:53:42 INFO] U286.SIG(18)
[sigmove 15:53:42 DEBUG] transformed U286Ma.SPC -> U286MA.SPC
[sigmove 15:53:42 DEBUG] transformed U286Mb.SPC -> U286MB.SPC
[sigmove 15:53:42 DEBUG] transformed U286Mc.SPC -> U286MC.SPC
[sigmove 15:53:42 DEBUG] transformed U286Md.SPC -> U286MD.SPC
[sigmove 15:53:42 DEBUG] transformed U286Me.SPC -> U286ME.SPC
[sigmove 15:53:42 DEBUG] transformed U286Mf.SPC -> U286MF.SPC
[Status 15:53:42 INFO] data for U286 transferred to science data processing
[Tidy 15:53:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:53:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:53:42 INFO] resetting WatchDogTimer
[Status 15:53:43 INFO] Starting Set [AERI set: name V286, 6 scans, 0 angle, D16300 command]
[Ingest 15:53:43 INFO] Sending XML status message
[Status 15:53:43 INFO] Mirror angle: 0
[Mirror 15:53:43 INFO] rotating to position V
[Status 15:53:44 INFO] .SET file for ACQ96 ready
[Ingest 15:53:44 INFO] Starting acquisition
[Status 15:53:44 INFO] reading housekeeping
[Status 15:54:02 INFO] acquire complete
[Status 15:54:03 INFO] writing housekeeping
[Sequencer 15:54:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:54:03 INFO] incremented V scene to 286 completed views
[Sequencer 15:54:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:54:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:54:03 INFO] incremented to [AERI set: name W286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:54:03 INFO] V286.SIG(18)
[sigmove 15:54:03 DEBUG] transformed V286Ma.SPC -> V286MA.SPC
[sigmove 15:54:03 DEBUG] transformed V286Mb.SPC -> V286MB.SPC
[sigmove 15:54:03 DEBUG] transformed V286Mc.SPC -> V286MC.SPC
[sigmove 15:54:03 DEBUG] transformed V286Md.SPC -> V286MD.SPC
[sigmove 15:54:03 DEBUG] transformed V286Me.SPC -> V286ME.SPC
[sigmove 15:54:03 DEBUG] transformed V286Mf.SPC -> V286MF.SPC
[Status 15:54:03 INFO] data for V286 transferred to science data processing
[Tidy 15:54:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:54:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:54:03 INFO] resetting WatchDogTimer
[Status 15:54:03 INFO] Starting Set [AERI set: name W286, 6 scans, 0 angle, D16300 command]
[Ingest 15:54:03 INFO] Sending XML status message
[Status 15:54:03 INFO] Mirror angle: 0
[Mirror 15:54:03 INFO] rotating to position W
[Status 15:54:04 INFO] .SET file for ACQ96 ready
[Ingest 15:54:04 INFO] Starting acquisition
[Status 15:54:04 INFO] reading housekeeping
[Status 15:54:22 INFO] acquire complete
[Status 15:54:23 INFO] writing housekeeping
[Sequencer 15:54:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:54:23 INFO] incremented W scene to 286 completed views
[Sequencer 15:54:23 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:54:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:54:23 INFO] incremented to [AERI set: name X286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:54:23 INFO] W286.SIG(18)
[sigmove 15:54:23 DEBUG] transformed W286Ma.SPC -> W286MA.SPC
[sigmove 15:54:23 DEBUG] transformed W286Mb.SPC -> W286MB.SPC
[sigmove 15:54:23 DEBUG] transformed W286Mc.SPC -> W286MC.SPC
[sigmove 15:54:23 DEBUG] transformed W286Md.SPC -> W286MD.SPC
[sigmove 15:54:23 DEBUG] transformed W286Me.SPC -> W286ME.SPC
[sigmove 15:54:23 DEBUG] transformed W286Mf.SPC -> W286MF.SPC
[Status 15:54:23 INFO] data for W286 transferred to science data processing
[Tidy 15:54:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:54:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:54:23 INFO] resetting WatchDogTimer
[Status 15:54:23 INFO] Starting Set [AERI set: name X286, 6 scans, 0 angle, D16300 command]
[Ingest 15:54:23 INFO] Sending XML status message
[Status 15:54:23 INFO] Mirror angle: 0
[Mirror 15:54:24 INFO] rotating to position X
[Status 15:54:24 INFO] .SET file for ACQ96 ready
[Ingest 15:54:24 INFO] Starting acquisition
[Status 15:54:25 INFO] reading housekeeping
[Status 15:54:42 INFO] acquire complete
[Status 15:54:43 INFO] writing housekeeping
[Sequencer 15:54:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:54:43 INFO] incremented X scene to 286 completed views
[Sequencer 15:54:43 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:54:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:54:43 INFO] incremented to [AERI set: name Y286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:54:43 INFO] X286.SIG(18)
[sigmove 15:54:43 DEBUG] transformed X286Ma.SPC -> X286MA.SPC
[sigmove 15:54:43 DEBUG] transformed X286Mb.SPC -> X286MB.SPC
[sigmove 15:54:43 DEBUG] transformed X286Mc.SPC -> X286MC.SPC
[sigmove 15:54:43 DEBUG] transformed X286Md.SPC -> X286MD.SPC
[sigmove 15:54:43 DEBUG] transformed X286Me.SPC -> X286ME.SPC
[sigmove 15:54:43 DEBUG] transformed X286Mf.SPC -> X286MF.SPC
[Status 15:54:43 INFO] data for X286 transferred to science data processing
[Tidy 15:54:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:54:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:54:43 INFO] resetting WatchDogTimer
[Status 15:54:43 INFO] Starting Set [AERI set: name Y286, 6 scans, 0 angle, D16300 command]
[Ingest 15:54:43 INFO] Sending XML status message
[Status 15:54:43 INFO] Mirror angle: 0
[Mirror 15:54:44 INFO] rotating to position Y
[Status 15:54:44 INFO] .SET file for ACQ96 ready
[Ingest 15:54:45 INFO] Starting acquisition
[Status 15:54:45 INFO] reading housekeeping
[Status 15:55:02 INFO] acquire complete
[Status 15:55:03 INFO] writing housekeeping
[Sequencer 15:55:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:55:03 INFO] incremented Y scene to 286 completed views
[Sequencer 15:55:03 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:55:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:55:03 INFO] incremented to [AERI set: name Z286, 6 scans, 0 angle, D16300 command] set
[sigmove 15:55:03 INFO] Y286.SIG(18)
[sigmove 15:55:03 DEBUG] transformed Y286Ma.SPC -> Y286MA.SPC
[sigmove 15:55:03 DEBUG] transformed Y286Mb.SPC -> Y286MB.SPC
[sigmove 15:55:03 DEBUG] transformed Y286Mc.SPC -> Y286MC.SPC
[sigmove 15:55:03 DEBUG] transformed Y286Md.SPC -> Y286MD.SPC
[sigmove 15:55:03 DEBUG] transformed Y286Me.SPC -> Y286ME.SPC
[sigmove 15:55:03 DEBUG] transformed Y286Mf.SPC -> Y286MF.SPC
[Status 15:55:03 INFO] data for Y286 transferred to science data processing
[Tidy 15:55:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:55:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:55:03 INFO] resetting WatchDogTimer
[Status 15:55:04 INFO] Starting Set [AERI set: name Z286, 6 scans, 0 angle, D16300 command]
[Ingest 15:55:04 INFO] Sending XML status message
[Status 15:55:04 INFO] Mirror angle: 0
[Mirror 15:55:04 INFO] rotating to position Z
[Status 15:55:04 INFO] .SET file for ACQ96 ready
[Ingest 15:55:05 INFO] Starting acquisition
[Status 15:55:05 INFO] reading housekeeping
[Status 15:55:22 INFO] acquire complete
[Status 15:55:23 INFO] writing housekeeping
[Sequencer 15:55:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:55:23 INFO] incremented Z scene to 286 completed views
[Sequencer 15:55:23 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:55:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:55:23 INFO] incremented to [AERI set: name H287, 6 scans, 60 angle, D22500 command] set
[sigmove 15:55:23 INFO] Z286.SIG(18)
[sigmove 15:55:23 DEBUG] transformed Z286Ma.SPC -> Z286MA.SPC
[sigmove 15:55:23 DEBUG] transformed Z286Mb.SPC -> Z286MB.SPC
[sigmove 15:55:23 DEBUG] transformed Z286Mc.SPC -> Z286MC.SPC
[sigmove 15:55:23 DEBUG] transformed Z286Md.SPC -> Z286MD.SPC
[sigmove 15:55:23 DEBUG] transformed Z286Me.SPC -> Z286ME.SPC
[sigmove 15:55:23 DEBUG] transformed Z286Mf.SPC -> Z286MF.SPC
[Status 15:55:23 INFO] data for Z286 transferred to science data processing
[Tidy 15:55:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:55:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:55:23 INFO] resetting WatchDogTimer
[Status 15:55:24 INFO] Starting Set [AERI set: name H287, 6 scans, 60 angle, D22500 command]
[Ingest 15:55:24 INFO] Sending XML status message
[Status 15:55:24 INFO] Mirror angle: 60
[Mirror 15:55:24 INFO] rotating to position H
[Status 15:55:25 INFO] .SET file for ACQ96 ready
[Ingest 15:55:25 INFO] Starting acquisition
[Status 15:55:26 INFO] reading housekeeping
[Status 15:55:44 INFO] acquire complete
[Status 15:55:45 INFO] writing housekeeping
[Sequencer 15:55:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:55:45 INFO] incremented H scene to 287 completed views
[Sequencer 15:55:45 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:55:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:55:45 INFO] incremented to [AERI set: name A287, 6 scans, 120 angle, D28300 command] set
[sigmove 15:55:45 INFO] H287.SIG(18)
[sigmove 15:55:45 DEBUG] transformed H287Ma.SPC -> H287MA.SPC
[sigmove 15:55:45 DEBUG] transformed H287Mb.SPC -> H287MB.SPC
[sigmove 15:55:45 DEBUG] transformed H287Mc.SPC -> H287MC.SPC
[sigmove 15:55:45 DEBUG] transformed H287Md.SPC -> H287MD.SPC
[sigmove 15:55:45 DEBUG] transformed H287Me.SPC -> H287ME.SPC
[sigmove 15:55:45 DEBUG] transformed H287Mf.SPC -> H287MF.SPC
[Status 15:55:45 INFO] data for H287 transferred to science data processing
[Tidy 15:55:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:55:45 INFO] A285.FIN(19),H285.FIN(19),S285.FIN(19),T285.FIN(19),U285.FIN(19),V285.FIN(19),W285.FIN(19),X285.FIN(19),Y285.FIN(19),Z285.FIN(19),A286.FIN(19),H286.FIN(19),S286.FIN(19),T286.FIN(19),U286.FIN(19),V286.FIN(19),W286.FIN(19),X286.FIN(19),Y286.FIN(19),Z286.FIN(19)
[sigmove 15:55:45 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:55:45 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 15:55:50 DEBUG] done zipping
[WatchDog 15:55:50 INFO] resetting WatchDogTimer
[Status 15:55:51 INFO] Starting Set [AERI set: name A287, 6 scans, 120 angle, D28300 command]
[Ingest 15:55:51 INFO] Sending XML status message
[Status 15:55:51 INFO] Mirror angle: 120
[Mirror 15:55:51 INFO] rotating to position A
[Status 15:55:52 INFO] .SET file for ACQ96 ready
[Ingest 15:55:52 INFO] Starting acquisition
[Status 15:55:53 INFO] reading housekeeping
[Status 15:56:11 INFO] acquire complete
[Status 15:56:12 INFO] writing housekeeping
[Sequencer 15:56:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:56:12 INFO] incremented A scene to 287 completed views
[Sequencer 15:56:12 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:56:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:56:12 INFO] incremented to [AERI set: name S287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:56:12 INFO] A287.SIG(18)
[sigmove 15:56:12 DEBUG] transformed A287Ma.SPC -> A287MA.SPC
[sigmove 15:56:12 DEBUG] transformed A287Mb.SPC -> A287MB.SPC
[sigmove 15:56:12 DEBUG] transformed A287Mc.SPC -> A287MC.SPC
[sigmove 15:56:12 DEBUG] transformed A287Md.SPC -> A287MD.SPC
[sigmove 15:56:12 DEBUG] transformed A287Me.SPC -> A287ME.SPC
[sigmove 15:56:12 DEBUG] transformed A287Mf.SPC -> A287MF.SPC
[Status 15:56:12 INFO] data for A287 transferred to science data processing
[Tidy 15:56:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:56:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:56:12 INFO] resetting WatchDogTimer
[Status 15:56:12 INFO] Starting Set [AERI set: name S287, 6 scans, 0 angle, D16300 command]
[Ingest 15:56:12 INFO] Sending XML status message
[Status 15:56:12 INFO] Mirror angle: 0
[Mirror 15:56:12 INFO] rotating to position S
[Status 15:56:14 INFO] .SET file for ACQ96 ready
[Ingest 15:56:14 INFO] Starting acquisition
[Status 15:56:15 INFO] reading housekeeping
[Status 15:56:32 INFO] acquire complete
[Status 15:56:33 INFO] writing housekeeping
[Sequencer 15:56:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:56:33 INFO] incremented S scene to 287 completed views
[Sequencer 15:56:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:56:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:56:33 INFO] incremented to [AERI set: name T287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:56:33 INFO] S287.SIG(18)
[sigmove 15:56:33 DEBUG] transformed S287Ma.SPC -> S287MA.SPC
[sigmove 15:56:33 DEBUG] transformed S287Mb.SPC -> S287MB.SPC
[sigmove 15:56:33 DEBUG] transformed S287Mc.SPC -> S287MC.SPC
[sigmove 15:56:33 DEBUG] transformed S287Md.SPC -> S287MD.SPC
[sigmove 15:56:33 DEBUG] transformed S287Me.SPC -> S287ME.SPC
[sigmove 15:56:33 DEBUG] transformed S287Mf.SPC -> S287MF.SPC
[Status 15:56:33 INFO] data for S287 transferred to science data processing
[Tidy 15:56:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:56:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:56:33 INFO] resetting WatchDogTimer
[Status 15:56:33 INFO] Starting Set [AERI set: name T287, 6 scans, 0 angle, D16300 command]
[Ingest 15:56:33 INFO] Sending XML status message
[Status 15:56:33 INFO] Mirror angle: 0
[Mirror 15:56:34 INFO] rotating to position T
[Status 15:56:34 INFO] .SET file for ACQ96 ready
[Ingest 15:56:35 INFO] Starting acquisition
[Status 15:56:35 INFO] reading housekeeping
[Status 15:56:53 INFO] acquire complete
[Status 15:56:54 INFO] writing housekeeping
[Sequencer 15:56:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:56:54 INFO] incremented T scene to 287 completed views
[Sequencer 15:56:54 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:56:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:56:54 INFO] incremented to [AERI set: name U287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:56:54 INFO] T287.SIG(18)
[sigmove 15:56:54 DEBUG] transformed T287Ma.SPC -> T287MA.SPC
[sigmove 15:56:54 DEBUG] transformed T287Mb.SPC -> T287MB.SPC
[sigmove 15:56:54 DEBUG] transformed T287Mc.SPC -> T287MC.SPC
[sigmove 15:56:54 DEBUG] transformed T287Md.SPC -> T287MD.SPC
[sigmove 15:56:54 DEBUG] transformed T287Me.SPC -> T287ME.SPC
[sigmove 15:56:54 DEBUG] transformed T287Mf.SPC -> T287MF.SPC
[Status 15:56:54 INFO] data for T287 transferred to science data processing
[Tidy 15:56:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:56:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:56:54 INFO] resetting WatchDogTimer
[Status 15:56:55 INFO] Starting Set [AERI set: name U287, 6 scans, 0 angle, D16300 command]
[Ingest 15:56:55 INFO] Sending XML status message
[Status 15:56:55 INFO] Mirror angle: 0
[Mirror 15:56:55 INFO] rotating to position U
[Status 15:56:56 INFO] .SET file for ACQ96 ready
[Ingest 15:56:56 INFO] Starting acquisition
[Status 15:56:56 INFO] reading housekeeping
[Status 15:57:15 INFO] acquire complete
[Status 15:57:16 INFO] writing housekeeping
[Sequencer 15:57:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:57:16 INFO] incremented U scene to 287 completed views
[Sequencer 15:57:16 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:57:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:57:16 INFO] incremented to [AERI set: name V287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:57:16 INFO] U287.SIG(18)
[sigmove 15:57:16 DEBUG] transformed U287Ma.SPC -> U287MA.SPC
[sigmove 15:57:16 DEBUG] transformed U287Mb.SPC -> U287MB.SPC
[sigmove 15:57:16 DEBUG] transformed U287Mc.SPC -> U287MC.SPC
[sigmove 15:57:16 DEBUG] transformed U287Md.SPC -> U287MD.SPC
[sigmove 15:57:16 DEBUG] transformed U287Me.SPC -> U287ME.SPC
[sigmove 15:57:16 DEBUG] transformed U287Mf.SPC -> U287MF.SPC
[Status 15:57:16 INFO] data for U287 transferred to science data processing
[Tidy 15:57:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:57:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:57:16 INFO] resetting WatchDogTimer
[Status 15:57:16 INFO] Starting Set [AERI set: name V287, 6 scans, 0 angle, D16300 command]
[Ingest 15:57:16 INFO] Sending XML status message
[Status 15:57:16 INFO] Mirror angle: 0
[Mirror 15:57:16 INFO] rotating to position V
[Status 15:57:17 INFO] .SET file for ACQ96 ready
[Ingest 15:57:17 INFO] Starting acquisition
[Status 15:57:18 INFO] reading housekeeping
[Status 15:57:35 INFO] acquire complete
[Status 15:57:36 INFO] writing housekeeping
[Sequencer 15:57:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:57:36 INFO] incremented V scene to 287 completed views
[Sequencer 15:57:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:57:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:57:36 INFO] incremented to [AERI set: name W287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:57:36 INFO] V287.SIG(18)
[sigmove 15:57:36 DEBUG] transformed V287Ma.SPC -> V287MA.SPC
[sigmove 15:57:36 DEBUG] transformed V287Mb.SPC -> V287MB.SPC
[sigmove 15:57:36 DEBUG] transformed V287Mc.SPC -> V287MC.SPC
[sigmove 15:57:36 DEBUG] transformed V287Md.SPC -> V287MD.SPC
[sigmove 15:57:36 DEBUG] transformed V287Me.SPC -> V287ME.SPC
[sigmove 15:57:36 DEBUG] transformed V287Mf.SPC -> V287MF.SPC
[Status 15:57:36 INFO] data for V287 transferred to science data processing
[Tidy 15:57:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:57:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:57:36 INFO] resetting WatchDogTimer
[Status 15:57:36 INFO] Starting Set [AERI set: name W287, 6 scans, 0 angle, D16300 command]
[Ingest 15:57:36 INFO] Sending XML status message
[Status 15:57:36 INFO] Mirror angle: 0
[Mirror 15:57:37 INFO] rotating to position W
[Status 15:57:37 INFO] .SET file for ACQ96 ready
[Ingest 15:57:37 INFO] Starting acquisition
[Status 15:57:38 INFO] reading housekeeping
[Status 15:57:55 INFO] acquire complete
[Status 15:57:56 INFO] writing housekeeping
[Sequencer 15:57:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:57:56 INFO] incremented W scene to 287 completed views
[Sequencer 15:57:56 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:57:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:57:56 INFO] incremented to [AERI set: name X287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:57:56 INFO] W287.SIG(18)
[sigmove 15:57:56 DEBUG] transformed W287Ma.SPC -> W287MA.SPC
[sigmove 15:57:56 DEBUG] transformed W287Mb.SPC -> W287MB.SPC
[sigmove 15:57:56 DEBUG] transformed W287Mc.SPC -> W287MC.SPC
[sigmove 15:57:56 DEBUG] transformed W287Md.SPC -> W287MD.SPC
[sigmove 15:57:56 DEBUG] transformed W287Me.SPC -> W287ME.SPC
[sigmove 15:57:56 DEBUG] transformed W287Mf.SPC -> W287MF.SPC
[Status 15:57:56 INFO] data for W287 transferred to science data processing
[Tidy 15:57:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:57:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:57:56 INFO] resetting WatchDogTimer
[Status 15:57:56 INFO] Starting Set [AERI set: name X287, 6 scans, 0 angle, D16300 command]
[Ingest 15:57:56 INFO] Sending XML status message
[Status 15:57:56 INFO] Mirror angle: 0
[Mirror 15:57:57 INFO] rotating to position X
[Status 15:57:57 INFO] .SET file for ACQ96 ready
[Ingest 15:57:58 INFO] Starting acquisition
[Status 15:57:58 INFO] reading housekeeping
[Status 15:58:16 INFO] acquire complete
[Status 15:58:17 INFO] writing housekeeping
[Sequencer 15:58:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:58:17 INFO] incremented X scene to 287 completed views
[Sequencer 15:58:17 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:58:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:58:17 INFO] incremented to [AERI set: name Y287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:58:17 INFO] X287.SIG(18)
[sigmove 15:58:17 DEBUG] transformed X287Ma.SPC -> X287MA.SPC
[sigmove 15:58:17 DEBUG] transformed X287Mb.SPC -> X287MB.SPC
[sigmove 15:58:17 DEBUG] transformed X287Mc.SPC -> X287MC.SPC
[sigmove 15:58:17 DEBUG] transformed X287Md.SPC -> X287MD.SPC
[sigmove 15:58:17 DEBUG] transformed X287Me.SPC -> X287ME.SPC
[sigmove 15:58:17 DEBUG] transformed X287Mf.SPC -> X287MF.SPC
[Status 15:58:17 INFO] data for X287 transferred to science data processing
[Tidy 15:58:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:58:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:58:17 INFO] resetting WatchDogTimer
[Status 15:58:18 INFO] Starting Set [AERI set: name Y287, 6 scans, 0 angle, D16300 command]
[Ingest 15:58:18 INFO] Sending XML status message
[Status 15:58:18 INFO] Mirror angle: 0
[Mirror 15:58:18 INFO] rotating to position Y
[Status 15:58:19 INFO] .SET file for ACQ96 ready
[Ingest 15:58:19 INFO] Starting acquisition
[Status 15:58:19 INFO] reading housekeeping
[Status 15:58:36 INFO] acquire complete
[Status 15:58:37 INFO] writing housekeeping
[Sequencer 15:58:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:58:37 INFO] incremented Y scene to 287 completed views
[Sequencer 15:58:37 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 15:58:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:58:37 INFO] incremented to [AERI set: name Z287, 6 scans, 0 angle, D16300 command] set
[sigmove 15:58:37 INFO] Y287.SIG(18)
[sigmove 15:58:37 DEBUG] transformed Y287Ma.SPC -> Y287MA.SPC
[sigmove 15:58:37 DEBUG] transformed Y287Mb.SPC -> Y287MB.SPC
[sigmove 15:58:37 DEBUG] transformed Y287Mc.SPC -> Y287MC.SPC
[sigmove 15:58:37 DEBUG] transformed Y287Md.SPC -> Y287MD.SPC
[sigmove 15:58:37 DEBUG] transformed Y287Me.SPC -> Y287ME.SPC
[sigmove 15:58:37 DEBUG] transformed Y287Mf.SPC -> Y287MF.SPC
[Status 15:58:37 INFO] data for Y287 transferred to science data processing
[Tidy 15:58:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:58:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:58:37 INFO] resetting WatchDogTimer
[Status 15:58:38 INFO] Starting Set [AERI set: name Z287, 6 scans, 0 angle, D16300 command]
[Ingest 15:58:38 INFO] Sending XML status message
[Status 15:58:38 INFO] Mirror angle: 0
[Mirror 15:58:38 INFO] rotating to position Z
[Status 15:58:39 INFO] .SET file for ACQ96 ready
[Ingest 15:58:39 INFO] Starting acquisition
[Status 15:58:39 INFO] reading housekeeping
[Status 15:58:57 INFO] acquire complete
[Status 15:58:58 INFO] writing housekeeping
[Sequencer 15:58:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:58:58 INFO] incremented Z scene to 287 completed views
[Sequencer 15:58:58 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 15:58:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:58:58 INFO] incremented to [AERI set: name A288, 6 scans, 120 angle, D28300 command] set
[sigmove 15:58:58 INFO] Z287.SIG(18)
[sigmove 15:58:58 DEBUG] transformed Z287Ma.SPC -> Z287MA.SPC
[sigmove 15:58:58 DEBUG] transformed Z287Mb.SPC -> Z287MB.SPC
[sigmove 15:58:58 DEBUG] transformed Z287Mc.SPC -> Z287MC.SPC
[sigmove 15:58:58 DEBUG] transformed Z287Md.SPC -> Z287MD.SPC
[sigmove 15:58:58 DEBUG] transformed Z287Me.SPC -> Z287ME.SPC
[sigmove 15:58:58 DEBUG] transformed Z287Mf.SPC -> Z287MF.SPC
[Status 15:58:58 INFO] data for Z287 transferred to science data processing
[Tidy 15:58:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:58:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:58:58 INFO] resetting WatchDogTimer
[Status 15:58:58 INFO] Starting Set [AERI set: name A288, 6 scans, 120 angle, D28300 command]
[Ingest 15:58:58 INFO] Sending XML status message
[Status 15:58:58 INFO] Mirror angle: 120
[Mirror 15:58:58 INFO] rotating to position A
[Status 15:59:00 INFO] .SET file for ACQ96 ready
[Ingest 15:59:00 INFO] Starting acquisition
[Status 15:59:01 INFO] reading housekeeping
[Status 15:59:18 INFO] acquire complete
[Status 15:59:19 INFO] writing housekeeping
[Sequencer 15:59:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:59:19 INFO] incremented A scene to 288 completed views
[Sequencer 15:59:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 15:59:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:59:19 INFO] incremented to [AERI set: name H288, 6 scans, 60 angle, D22500 command] set
[sigmove 15:59:19 INFO] A288.SIG(18)
[sigmove 15:59:19 DEBUG] transformed A288Ma.SPC -> A288MA.SPC
[sigmove 15:59:19 DEBUG] transformed A288Mb.SPC -> A288MB.SPC
[sigmove 15:59:19 DEBUG] transformed A288Mc.SPC -> A288MC.SPC
[sigmove 15:59:19 DEBUG] transformed A288Md.SPC -> A288MD.SPC
[sigmove 15:59:19 DEBUG] transformed A288Me.SPC -> A288ME.SPC
[sigmove 15:59:19 DEBUG] transformed A288Mf.SPC -> A288MF.SPC
[Status 15:59:19 INFO] data for A288 transferred to science data processing
[Tidy 15:59:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:59:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:59:19 INFO] resetting WatchDogTimer
[Status 15:59:19 INFO] Starting Set [AERI set: name H288, 6 scans, 60 angle, D22500 command]
[Ingest 15:59:19 INFO] Sending XML status message
[Status 15:59:19 INFO] Mirror angle: 60
[Mirror 15:59:20 INFO] rotating to position H
[Status 15:59:21 INFO] .SET file for ACQ96 ready
[Ingest 15:59:21 INFO] Starting acquisition
[Status 15:59:22 INFO] reading housekeeping
[Status 15:59:39 INFO] acquire complete
[Status 15:59:40 INFO] writing housekeeping
[Sequencer 15:59:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 15:59:40 INFO] incremented H scene to 288 completed views
[Sequencer 15:59:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 15:59:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 15:59:40 INFO] incremented to [AERI set: name S288, 6 scans, 0 angle, D16300 command] set
[sigmove 15:59:40 INFO] H288.SIG(18)
[sigmove 15:59:40 DEBUG] transformed H288Ma.SPC -> H288MA.SPC
[sigmove 15:59:40 DEBUG] transformed H288Mb.SPC -> H288MB.SPC
[sigmove 15:59:40 DEBUG] transformed H288Mc.SPC -> H288MC.SPC
[sigmove 15:59:40 DEBUG] transformed H288Md.SPC -> H288MD.SPC
[sigmove 15:59:40 DEBUG] transformed H288Me.SPC -> H288ME.SPC
[sigmove 15:59:40 DEBUG] transformed H288Mf.SPC -> H288MF.SPC
[Status 15:59:40 INFO] data for H288 transferred to science data processing
[Tidy 15:59:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 15:59:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 15:59:40 INFO] resetting WatchDogTimer
[Status 15:59:41 INFO] Starting Set [AERI set: name S288, 6 scans, 0 angle, D16300 command]
[Ingest 15:59:41 INFO] Sending XML status message
[Status 15:59:41 INFO] Mirror angle: 0
[Mirror 15:59:41 INFO] rotating to position S
[Status 15:59:42 INFO] .SET file for ACQ96 ready
[Ingest 15:59:43 INFO] Starting acquisition
[Status 15:59:43 INFO] reading housekeeping
[Status 16:00:01 INFO] acquire complete
[Status 16:00:02 INFO] writing housekeeping
[Sequencer 16:00:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:00:02 INFO] incremented S scene to 288 completed views
[Sequencer 16:00:02 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:00:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:00:02 INFO] incremented to [AERI set: name T288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:00:02 INFO] S288.SIG(18)
[sigmove 16:00:02 DEBUG] transformed S288Ma.SPC -> S288MA.SPC
[sigmove 16:00:02 DEBUG] transformed S288Mb.SPC -> S288MB.SPC
[sigmove 16:00:02 DEBUG] transformed S288Mc.SPC -> S288MC.SPC
[sigmove 16:00:02 DEBUG] transformed S288Md.SPC -> S288MD.SPC
[sigmove 16:00:02 DEBUG] transformed S288Me.SPC -> S288ME.SPC
[sigmove 16:00:02 DEBUG] transformed S288Mf.SPC -> S288MF.SPC
[Status 16:00:02 INFO] data for S288 transferred to science data processing
[Tidy 16:00:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:00:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:00:02 INFO] resetting WatchDogTimer
[Status 16:00:02 INFO] Starting Set [AERI set: name T288, 6 scans, 0 angle, D16300 command]
[Ingest 16:00:02 INFO] Sending XML status message
[Status 16:00:02 INFO] Mirror angle: 0
[Mirror 16:00:02 INFO] rotating to position T
[Status 16:00:03 INFO] .SET file for ACQ96 ready
[Ingest 16:00:03 INFO] Starting acquisition
[Status 16:00:04 INFO] reading housekeeping
[Status 16:00:22 INFO] acquire complete
[Status 16:00:23 INFO] writing housekeeping
[Sequencer 16:00:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:00:23 INFO] incremented T scene to 288 completed views
[Sequencer 16:00:23 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:00:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:00:23 INFO] incremented to [AERI set: name U288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:00:23 INFO] T288.SIG(18)
[sigmove 16:00:23 DEBUG] transformed T288Ma.SPC -> T288MA.SPC
[sigmove 16:00:23 DEBUG] transformed T288Mb.SPC -> T288MB.SPC
[sigmove 16:00:23 DEBUG] transformed T288Mc.SPC -> T288MC.SPC
[sigmove 16:00:23 DEBUG] transformed T288Md.SPC -> T288MD.SPC
[sigmove 16:00:23 DEBUG] transformed T288Me.SPC -> T288ME.SPC
[sigmove 16:00:23 DEBUG] transformed T288Mf.SPC -> T288MF.SPC
[Status 16:00:23 INFO] data for T288 transferred to science data processing
[Tidy 16:00:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:00:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:00:23 INFO] resetting WatchDogTimer
[Status 16:00:23 INFO] Starting Set [AERI set: name U288, 6 scans, 0 angle, D16300 command]
[Ingest 16:00:23 INFO] Sending XML status message
[Status 16:00:23 INFO] Mirror angle: 0
[Mirror 16:00:24 INFO] rotating to position U
[Status 16:00:24 INFO] .SET file for ACQ96 ready
[Ingest 16:00:25 INFO] Starting acquisition
[Status 16:00:25 INFO] reading housekeeping
[Status 16:00:43 INFO] acquire complete
[Status 16:00:44 INFO] writing housekeeping
[Sequencer 16:00:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:00:44 INFO] incremented U scene to 288 completed views
[Sequencer 16:00:44 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:00:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:00:44 INFO] incremented to [AERI set: name V288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:00:44 INFO] U288.SIG(18)
[sigmove 16:00:44 DEBUG] transformed U288Ma.SPC -> U288MA.SPC
[sigmove 16:00:44 DEBUG] transformed U288Mb.SPC -> U288MB.SPC
[sigmove 16:00:44 DEBUG] transformed U288Mc.SPC -> U288MC.SPC
[sigmove 16:00:44 DEBUG] transformed U288Md.SPC -> U288MD.SPC
[sigmove 16:00:44 DEBUG] transformed U288Me.SPC -> U288ME.SPC
[sigmove 16:00:44 DEBUG] transformed U288Mf.SPC -> U288MF.SPC
[Status 16:00:44 INFO] data for U288 transferred to science data processing
[Tidy 16:00:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:00:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:00:44 INFO] resetting WatchDogTimer
[Status 16:00:45 INFO] Starting Set [AERI set: name V288, 6 scans, 0 angle, D16300 command]
[Ingest 16:00:45 INFO] Sending XML status message
[Status 16:00:45 INFO] Mirror angle: 0
[Mirror 16:00:45 INFO] rotating to position V
[Status 16:00:46 INFO] .SET file for ACQ96 ready
[Ingest 16:00:46 INFO] Starting acquisition
[Status 16:00:46 INFO] reading housekeeping
[Status 16:01:03 INFO] acquire complete
[Status 16:01:04 INFO] writing housekeeping
[Sequencer 16:01:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:01:04 INFO] incremented V scene to 288 completed views
[Sequencer 16:01:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:01:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:01:04 INFO] incremented to [AERI set: name W288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:01:04 INFO] V288.SIG(18)
[sigmove 16:01:04 DEBUG] transformed V288Ma.SPC -> V288MA.SPC
[sigmove 16:01:04 DEBUG] transformed V288Mb.SPC -> V288MB.SPC
[sigmove 16:01:04 DEBUG] transformed V288Mc.SPC -> V288MC.SPC
[sigmove 16:01:04 DEBUG] transformed V288Md.SPC -> V288MD.SPC
[sigmove 16:01:04 DEBUG] transformed V288Me.SPC -> V288ME.SPC
[sigmove 16:01:04 DEBUG] transformed V288Mf.SPC -> V288MF.SPC
[Status 16:01:04 INFO] data for V288 transferred to science data processing
[Tidy 16:01:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:01:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:01:04 INFO] resetting WatchDogTimer
[Status 16:01:05 INFO] Starting Set [AERI set: name W288, 6 scans, 0 angle, D16300 command]
[Ingest 16:01:05 INFO] Sending XML status message
[Status 16:01:05 INFO] Mirror angle: 0
[Mirror 16:01:05 INFO] rotating to position W
[Status 16:01:06 INFO] .SET file for ACQ96 ready
[Ingest 16:01:06 INFO] Starting acquisition
[Status 16:01:06 INFO] reading housekeeping
[Status 16:01:24 INFO] acquire complete
[Status 16:01:25 INFO] writing housekeeping
[Sequencer 16:01:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:01:25 INFO] incremented W scene to 288 completed views
[Sequencer 16:01:25 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:01:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:01:25 INFO] incremented to [AERI set: name X288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:01:25 INFO] W288.SIG(18)
[sigmove 16:01:25 DEBUG] transformed W288Ma.SPC -> W288MA.SPC
[sigmove 16:01:25 DEBUG] transformed W288Mb.SPC -> W288MB.SPC
[sigmove 16:01:25 DEBUG] transformed W288Mc.SPC -> W288MC.SPC
[sigmove 16:01:25 DEBUG] transformed W288Md.SPC -> W288MD.SPC
[sigmove 16:01:25 DEBUG] transformed W288Me.SPC -> W288ME.SPC
[sigmove 16:01:25 DEBUG] transformed W288Mf.SPC -> W288MF.SPC
[Status 16:01:25 INFO] data for W288 transferred to science data processing
[Tidy 16:01:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:01:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:01:25 INFO] resetting WatchDogTimer
[Status 16:01:25 INFO] Starting Set [AERI set: name X288, 6 scans, 0 angle, D16300 command]
[Ingest 16:01:25 INFO] Sending XML status message
[Status 16:01:25 INFO] Mirror angle: 0
[Mirror 16:01:25 INFO] rotating to position X
[Status 16:01:26 INFO] .SET file for ACQ96 ready
[Ingest 16:01:26 INFO] Starting acquisition
[Status 16:01:27 INFO] reading housekeeping
[Status 16:01:44 INFO] acquire complete
[Status 16:01:45 INFO] writing housekeeping
[Sequencer 16:01:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:01:45 INFO] incremented X scene to 288 completed views
[Sequencer 16:01:45 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:01:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:01:45 INFO] incremented to [AERI set: name Y288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:01:45 INFO] X288.SIG(18)
[sigmove 16:01:45 DEBUG] transformed X288Ma.SPC -> X288MA.SPC
[sigmove 16:01:45 DEBUG] transformed X288Mb.SPC -> X288MB.SPC
[sigmove 16:01:45 DEBUG] transformed X288Mc.SPC -> X288MC.SPC
[sigmove 16:01:45 DEBUG] transformed X288Md.SPC -> X288MD.SPC
[sigmove 16:01:45 DEBUG] transformed X288Me.SPC -> X288ME.SPC
[sigmove 16:01:45 DEBUG] transformed X288Mf.SPC -> X288MF.SPC
[Status 16:01:45 INFO] data for X288 transferred to science data processing
[Tidy 16:01:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:01:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:01:45 INFO] resetting WatchDogTimer
[Status 16:01:45 INFO] Starting Set [AERI set: name Y288, 6 scans, 0 angle, D16300 command]
[Ingest 16:01:45 INFO] Sending XML status message
[Status 16:01:45 INFO] Mirror angle: 0
[Mirror 16:01:46 INFO] rotating to position Y
[Status 16:01:46 INFO] .SET file for ACQ96 ready
[Ingest 16:01:46 INFO] Starting acquisition
[Status 16:01:47 INFO] reading housekeeping
[Status 16:02:04 INFO] acquire complete
[Status 16:02:05 INFO] writing housekeeping
[Sequencer 16:02:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:02:05 INFO] incremented Y scene to 288 completed views
[Sequencer 16:02:05 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:02:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:02:05 INFO] incremented to [AERI set: name Z288, 6 scans, 0 angle, D16300 command] set
[sigmove 16:02:05 INFO] Y288.SIG(18)
[sigmove 16:02:05 DEBUG] transformed Y288Ma.SPC -> Y288MA.SPC
[sigmove 16:02:05 DEBUG] transformed Y288Mb.SPC -> Y288MB.SPC
[sigmove 16:02:05 DEBUG] transformed Y288Mc.SPC -> Y288MC.SPC
[sigmove 16:02:05 DEBUG] transformed Y288Md.SPC -> Y288MD.SPC
[sigmove 16:02:05 DEBUG] transformed Y288Me.SPC -> Y288ME.SPC
[sigmove 16:02:05 DEBUG] transformed Y288Mf.SPC -> Y288MF.SPC
[Status 16:02:05 INFO] data for Y288 transferred to science data processing
[Tidy 16:02:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:02:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:02:05 INFO] resetting WatchDogTimer
[Status 16:02:05 INFO] Starting Set [AERI set: name Z288, 6 scans, 0 angle, D16300 command]
[Ingest 16:02:05 INFO] Sending XML status message
[Status 16:02:05 INFO] Mirror angle: 0
[Mirror 16:02:06 INFO] rotating to position Z
[Status 16:02:06 INFO] .SET file for ACQ96 ready
[Ingest 16:02:07 INFO] Starting acquisition
[Status 16:02:07 INFO] reading housekeeping
[Status 16:02:24 INFO] acquire complete
[Status 16:02:25 INFO] writing housekeeping
[Sequencer 16:02:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:02:25 INFO] incremented Z scene to 288 completed views
[Sequencer 16:02:25 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:02:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:02:25 INFO] incremented to [AERI set: name H289, 6 scans, 60 angle, D22500 command] set
[sigmove 16:02:25 INFO] Z288.SIG(18)
[sigmove 16:02:25 DEBUG] transformed Z288Ma.SPC -> Z288MA.SPC
[sigmove 16:02:25 DEBUG] transformed Z288Mb.SPC -> Z288MB.SPC
[sigmove 16:02:25 DEBUG] transformed Z288Mc.SPC -> Z288MC.SPC
[sigmove 16:02:25 DEBUG] transformed Z288Md.SPC -> Z288MD.SPC
[sigmove 16:02:25 DEBUG] transformed Z288Me.SPC -> Z288ME.SPC
[sigmove 16:02:25 DEBUG] transformed Z288Mf.SPC -> Z288MF.SPC
[Status 16:02:25 INFO] data for Z288 transferred to science data processing
[Tidy 16:02:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:02:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:02:25 INFO] resetting WatchDogTimer
[Status 16:02:26 INFO] Starting Set [AERI set: name H289, 6 scans, 60 angle, D22500 command]
[Ingest 16:02:26 INFO] Sending XML status message
[Status 16:02:26 INFO] Mirror angle: 60
[Mirror 16:02:26 INFO] rotating to position H
[Status 16:02:27 INFO] .SET file for ACQ96 ready
[Ingest 16:02:27 INFO] Starting acquisition
[Status 16:02:28 INFO] reading housekeeping
[Status 16:02:46 INFO] acquire complete
[Status 16:02:47 INFO] writing housekeeping
[Sequencer 16:02:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:02:47 INFO] incremented H scene to 289 completed views
[Sequencer 16:02:47 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:02:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:02:47 INFO] incremented to [AERI set: name A289, 6 scans, 120 angle, D28300 command] set
[sigmove 16:02:47 INFO] H289.SIG(18)
[sigmove 16:02:47 DEBUG] transformed H289Ma.SPC -> H289MA.SPC
[sigmove 16:02:47 DEBUG] transformed H289Mb.SPC -> H289MB.SPC
[sigmove 16:02:47 DEBUG] transformed H289Mc.SPC -> H289MC.SPC
[sigmove 16:02:47 DEBUG] transformed H289Md.SPC -> H289MD.SPC
[sigmove 16:02:47 DEBUG] transformed H289Me.SPC -> H289ME.SPC
[sigmove 16:02:47 DEBUG] transformed H289Mf.SPC -> H289MF.SPC
[Status 16:02:47 INFO] data for H289 transferred to science data processing
[Tidy 16:02:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:02:47 INFO] A287.FIN(19),H287.FIN(19),S287.FIN(19),T287.FIN(19),U287.FIN(19),V287.FIN(19),W287.FIN(19),X287.FIN(19),Y287.FIN(19),Z287.FIN(19),A288.FIN(19),H288.FIN(19),S288.FIN(19),T288.FIN(19),U288.FIN(19),V288.FIN(19),W288.FIN(19),X288.FIN(19),Y288.FIN(19),Z288.FIN(19)
[sigmove 16:02:47 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:02:47 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:02:52 DEBUG] done zipping
[WatchDog 16:02:52 INFO] resetting WatchDogTimer
[Status 16:02:52 INFO] Starting Set [AERI set: name A289, 6 scans, 120 angle, D28300 command]
[Ingest 16:02:52 INFO] Sending XML status message
[Status 16:02:52 INFO] Mirror angle: 120
[Mirror 16:02:53 INFO] rotating to position A
[Status 16:02:54 INFO] .SET file for ACQ96 ready
[Ingest 16:02:54 INFO] Starting acquisition
[Status 16:02:54 INFO] reading housekeeping
[Status 16:03:13 INFO] acquire complete
[Status 16:03:14 INFO] writing housekeeping
[Sequencer 16:03:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:03:14 INFO] incremented A scene to 289 completed views
[Sequencer 16:03:14 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:03:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:03:14 INFO] incremented to [AERI set: name S289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:03:14 INFO] A289.SIG(18)
[sigmove 16:03:14 DEBUG] transformed A289Ma.SPC -> A289MA.SPC
[sigmove 16:03:14 DEBUG] transformed A289Mb.SPC -> A289MB.SPC
[sigmove 16:03:14 DEBUG] transformed A289Mc.SPC -> A289MC.SPC
[sigmove 16:03:14 DEBUG] transformed A289Md.SPC -> A289MD.SPC
[sigmove 16:03:14 DEBUG] transformed A289Me.SPC -> A289ME.SPC
[sigmove 16:03:14 DEBUG] transformed A289Mf.SPC -> A289MF.SPC
[Status 16:03:14 INFO] data for A289 transferred to science data processing
[Tidy 16:03:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:03:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:03:14 INFO] resetting WatchDogTimer
[Status 16:03:14 INFO] Starting Set [AERI set: name S289, 6 scans, 0 angle, D16300 command]
[Ingest 16:03:14 INFO] Sending XML status message
[Status 16:03:14 INFO] Mirror angle: 0
[Mirror 16:03:14 INFO] rotating to position S
[Status 16:03:16 INFO] .SET file for ACQ96 ready
[Ingest 16:03:16 INFO] Starting acquisition
[Status 16:03:17 INFO] reading housekeeping
[Status 16:03:34 INFO] acquire complete
[Status 16:03:35 INFO] writing housekeeping
[Sequencer 16:03:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:03:35 INFO] incremented S scene to 289 completed views
[Sequencer 16:03:35 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:03:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:03:35 INFO] incremented to [AERI set: name T289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:03:35 INFO] S289.SIG(18)
[sigmove 16:03:35 DEBUG] transformed S289Ma.SPC -> S289MA.SPC
[sigmove 16:03:35 DEBUG] transformed S289Mb.SPC -> S289MB.SPC
[sigmove 16:03:35 DEBUG] transformed S289Mc.SPC -> S289MC.SPC
[sigmove 16:03:35 DEBUG] transformed S289Md.SPC -> S289MD.SPC
[sigmove 16:03:35 DEBUG] transformed S289Me.SPC -> S289ME.SPC
[sigmove 16:03:35 DEBUG] transformed S289Mf.SPC -> S289MF.SPC
[Status 16:03:35 INFO] data for S289 transferred to science data processing
[Tidy 16:03:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:03:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:03:35 INFO] resetting WatchDogTimer
[Status 16:03:35 INFO] Starting Set [AERI set: name T289, 6 scans, 0 angle, D16300 command]
[Ingest 16:03:35 INFO] Sending XML status message
[Status 16:03:35 INFO] Mirror angle: 0
[Mirror 16:03:36 INFO] rotating to position T
[Status 16:03:36 INFO] .SET file for ACQ96 ready
[Ingest 16:03:37 INFO] Starting acquisition
[Status 16:03:37 INFO] reading housekeeping
[Status 16:03:55 INFO] acquire complete
[Status 16:03:56 INFO] writing housekeeping
[Sequencer 16:03:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:03:56 INFO] incremented T scene to 289 completed views
[Sequencer 16:03:56 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:03:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:03:56 INFO] incremented to [AERI set: name U289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:03:56 INFO] T289.SIG(18)
[sigmove 16:03:56 DEBUG] transformed T289Ma.SPC -> T289MA.SPC
[sigmove 16:03:56 DEBUG] transformed T289Mb.SPC -> T289MB.SPC
[sigmove 16:03:56 DEBUG] transformed T289Mc.SPC -> T289MC.SPC
[sigmove 16:03:56 DEBUG] transformed T289Md.SPC -> T289MD.SPC
[sigmove 16:03:56 DEBUG] transformed T289Me.SPC -> T289ME.SPC
[sigmove 16:03:56 DEBUG] transformed T289Mf.SPC -> T289MF.SPC
[Status 16:03:56 INFO] data for T289 transferred to science data processing
[Tidy 16:03:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:03:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:03:56 INFO] resetting WatchDogTimer
[Status 16:03:57 INFO] Starting Set [AERI set: name U289, 6 scans, 0 angle, D16300 command]
[Ingest 16:03:57 INFO] Sending XML status message
[Status 16:03:57 INFO] Mirror angle: 0
[Mirror 16:03:57 INFO] rotating to position U
[Status 16:03:57 INFO] .SET file for ACQ96 ready
[Ingest 16:03:58 INFO] Starting acquisition
[Status 16:03:58 INFO] reading housekeeping
[Status 16:04:15 INFO] acquire complete
[Status 16:04:16 INFO] writing housekeeping
[Sequencer 16:04:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:04:16 INFO] incremented U scene to 289 completed views
[Sequencer 16:04:16 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:04:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:04:16 INFO] incremented to [AERI set: name V289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:04:16 INFO] U289.SIG(18)
[sigmove 16:04:16 DEBUG] transformed U289Ma.SPC -> U289MA.SPC
[sigmove 16:04:16 DEBUG] transformed U289Mb.SPC -> U289MB.SPC
[sigmove 16:04:16 DEBUG] transformed U289Mc.SPC -> U289MC.SPC
[sigmove 16:04:16 DEBUG] transformed U289Md.SPC -> U289MD.SPC
[sigmove 16:04:16 DEBUG] transformed U289Me.SPC -> U289ME.SPC
[sigmove 16:04:16 DEBUG] transformed U289Mf.SPC -> U289MF.SPC
[Status 16:04:16 INFO] data for U289 transferred to science data processing
[Tidy 16:04:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:04:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:04:16 INFO] resetting WatchDogTimer
[Status 16:04:17 INFO] Starting Set [AERI set: name V289, 6 scans, 0 angle, D16300 command]
[Ingest 16:04:17 INFO] Sending XML status message
[Status 16:04:17 INFO] Mirror angle: 0
[Mirror 16:04:17 INFO] rotating to position V
[Status 16:04:18 INFO] .SET file for ACQ96 ready
[Ingest 16:04:18 INFO] Starting acquisition
[Status 16:04:18 INFO] reading housekeeping
[Status 16:04:36 INFO] acquire complete
[Status 16:04:37 INFO] writing housekeeping
[Sequencer 16:04:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:04:37 INFO] incremented V scene to 289 completed views
[Sequencer 16:04:37 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:04:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:04:37 INFO] incremented to [AERI set: name W289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:04:37 INFO] V289.SIG(18)
[sigmove 16:04:37 DEBUG] transformed V289Ma.SPC -> V289MA.SPC
[sigmove 16:04:37 DEBUG] transformed V289Mb.SPC -> V289MB.SPC
[sigmove 16:04:37 DEBUG] transformed V289Mc.SPC -> V289MC.SPC
[sigmove 16:04:37 DEBUG] transformed V289Md.SPC -> V289MD.SPC
[sigmove 16:04:37 DEBUG] transformed V289Me.SPC -> V289ME.SPC
[sigmove 16:04:37 DEBUG] transformed V289Mf.SPC -> V289MF.SPC
[Status 16:04:37 INFO] data for V289 transferred to science data processing
[Tidy 16:04:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:04:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:04:37 INFO] resetting WatchDogTimer
[Status 16:04:37 INFO] Starting Set [AERI set: name W289, 6 scans, 0 angle, D16300 command]
[Ingest 16:04:37 INFO] Sending XML status message
[Status 16:04:37 INFO] Mirror angle: 0
[Mirror 16:04:37 INFO] rotating to position W
[Status 16:04:38 INFO] .SET file for ACQ96 ready
[Ingest 16:04:38 INFO] Starting acquisition
[Status 16:04:39 INFO] reading housekeeping
[Status 16:04:56 INFO] acquire complete
[Status 16:04:57 INFO] writing housekeeping
[Sequencer 16:04:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:04:57 INFO] incremented W scene to 289 completed views
[Sequencer 16:04:57 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:04:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:04:57 INFO] incremented to [AERI set: name X289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:04:57 INFO] W289.SIG(18)
[sigmove 16:04:57 DEBUG] transformed W289Ma.SPC -> W289MA.SPC
[sigmove 16:04:57 DEBUG] transformed W289Mb.SPC -> W289MB.SPC
[sigmove 16:04:57 DEBUG] transformed W289Mc.SPC -> W289MC.SPC
[sigmove 16:04:57 DEBUG] transformed W289Md.SPC -> W289MD.SPC
[sigmove 16:04:57 DEBUG] transformed W289Me.SPC -> W289ME.SPC
[sigmove 16:04:57 DEBUG] transformed W289Mf.SPC -> W289MF.SPC
[Status 16:04:57 INFO] data for W289 transferred to science data processing
[Tidy 16:04:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:04:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:04:57 INFO] resetting WatchDogTimer
[Status 16:04:57 INFO] Starting Set [AERI set: name X289, 6 scans, 0 angle, D16300 command]
[Ingest 16:04:57 INFO] Sending XML status message
[Status 16:04:57 INFO] Mirror angle: 0
[Mirror 16:04:57 INFO] rotating to position X
[Status 16:04:58 INFO] .SET file for ACQ96 ready
[Ingest 16:04:58 INFO] Starting acquisition
[Status 16:04:59 INFO] reading housekeeping
[Status 16:05:16 INFO] acquire complete
[Status 16:05:17 INFO] writing housekeeping
[Sequencer 16:05:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:05:17 INFO] incremented X scene to 289 completed views
[Sequencer 16:05:17 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:05:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:05:17 INFO] incremented to [AERI set: name Y289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:05:17 INFO] X289.SIG(18)
[sigmove 16:05:17 DEBUG] transformed X289Ma.SPC -> X289MA.SPC
[sigmove 16:05:17 DEBUG] transformed X289Mb.SPC -> X289MB.SPC
[sigmove 16:05:17 DEBUG] transformed X289Mc.SPC -> X289MC.SPC
[sigmove 16:05:17 DEBUG] transformed X289Md.SPC -> X289MD.SPC
[sigmove 16:05:17 DEBUG] transformed X289Me.SPC -> X289ME.SPC
[sigmove 16:05:17 DEBUG] transformed X289Mf.SPC -> X289MF.SPC
[Status 16:05:17 INFO] data for X289 transferred to science data processing
[Tidy 16:05:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:05:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:05:17 INFO] resetting WatchDogTimer
[Status 16:05:17 INFO] Starting Set [AERI set: name Y289, 6 scans, 0 angle, D16300 command]
[Ingest 16:05:17 INFO] Sending XML status message
[Status 16:05:17 INFO] Mirror angle: 0
[Mirror 16:05:18 INFO] rotating to position Y
[Status 16:05:18 INFO] .SET file for ACQ96 ready
[Ingest 16:05:18 INFO] Starting acquisition
[Status 16:05:19 INFO] reading housekeeping
[Status 16:05:36 INFO] acquire complete
[Status 16:05:37 INFO] writing housekeeping
[Sequencer 16:05:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:05:37 INFO] incremented Y scene to 289 completed views
[Sequencer 16:05:37 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:05:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:05:37 INFO] incremented to [AERI set: name Z289, 6 scans, 0 angle, D16300 command] set
[sigmove 16:05:37 INFO] Y289.SIG(18)
[sigmove 16:05:37 DEBUG] transformed Y289Ma.SPC -> Y289MA.SPC
[sigmove 16:05:37 DEBUG] transformed Y289Mb.SPC -> Y289MB.SPC
[sigmove 16:05:37 DEBUG] transformed Y289Mc.SPC -> Y289MC.SPC
[sigmove 16:05:37 DEBUG] transformed Y289Md.SPC -> Y289MD.SPC
[sigmove 16:05:37 DEBUG] transformed Y289Me.SPC -> Y289ME.SPC
[sigmove 16:05:37 DEBUG] transformed Y289Mf.SPC -> Y289MF.SPC
[Status 16:05:37 INFO] data for Y289 transferred to science data processing
[Tidy 16:05:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:05:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:05:37 INFO] resetting WatchDogTimer
[Status 16:05:38 INFO] Starting Set [AERI set: name Z289, 6 scans, 0 angle, D16300 command]
[Ingest 16:05:38 INFO] Sending XML status message
[Status 16:05:38 INFO] Mirror angle: 0
[Mirror 16:05:38 INFO] rotating to position Z
[Status 16:05:38 INFO] .SET file for ACQ96 ready
[Ingest 16:05:39 INFO] Starting acquisition
[Status 16:05:39 INFO] reading housekeeping
[Status 16:05:56 INFO] acquire complete
[Status 16:05:57 INFO] writing housekeeping
[Sequencer 16:05:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:05:57 INFO] incremented Z scene to 289 completed views
[Sequencer 16:05:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:05:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:05:57 INFO] incremented to [AERI set: name A290, 6 scans, 120 angle, D28300 command] set
[sigmove 16:05:57 INFO] Z289.SIG(18)
[sigmove 16:05:57 DEBUG] transformed Z289Ma.SPC -> Z289MA.SPC
[sigmove 16:05:57 DEBUG] transformed Z289Mb.SPC -> Z289MB.SPC
[sigmove 16:05:57 DEBUG] transformed Z289Mc.SPC -> Z289MC.SPC
[sigmove 16:05:57 DEBUG] transformed Z289Md.SPC -> Z289MD.SPC
[sigmove 16:05:57 DEBUG] transformed Z289Me.SPC -> Z289ME.SPC
[sigmove 16:05:57 DEBUG] transformed Z289Mf.SPC -> Z289MF.SPC
[Status 16:05:57 INFO] data for Z289 transferred to science data processing
[Tidy 16:05:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:05:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:05:57 INFO] resetting WatchDogTimer
[Status 16:05:58 INFO] Starting Set [AERI set: name A290, 6 scans, 120 angle, D28300 command]
[Ingest 16:05:58 INFO] Sending XML status message
[Status 16:05:58 INFO] Mirror angle: 120
[Mirror 16:05:58 INFO] rotating to position A
[Status 16:06:00 INFO] .SET file for ACQ96 ready
[Ingest 16:06:00 INFO] Starting acquisition
[Status 16:06:00 INFO] reading housekeeping
[Status 16:06:18 INFO] acquire complete
[Status 16:06:19 INFO] writing housekeeping
[Sequencer 16:06:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:06:19 INFO] incremented A scene to 290 completed views
[Sequencer 16:06:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:06:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:06:19 INFO] incremented to [AERI set: name H290, 6 scans, 60 angle, D22500 command] set
[sigmove 16:06:19 INFO] A290.SIG(18)
[sigmove 16:06:19 DEBUG] transformed A290Ma.SPC -> A290MA.SPC
[sigmove 16:06:19 DEBUG] transformed A290Mb.SPC -> A290MB.SPC
[sigmove 16:06:19 DEBUG] transformed A290Mc.SPC -> A290MC.SPC
[sigmove 16:06:19 DEBUG] transformed A290Md.SPC -> A290MD.SPC
[sigmove 16:06:19 DEBUG] transformed A290Me.SPC -> A290ME.SPC
[sigmove 16:06:19 DEBUG] transformed A290Mf.SPC -> A290MF.SPC
[Status 16:06:19 INFO] data for A290 transferred to science data processing
[Tidy 16:06:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:06:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:06:19 INFO] resetting WatchDogTimer
[Status 16:06:19 INFO] Starting Set [AERI set: name H290, 6 scans, 60 angle, D22500 command]
[Ingest 16:06:19 INFO] Sending XML status message
[Status 16:06:19 INFO] Mirror angle: 60
[Mirror 16:06:19 INFO] rotating to position H
[Status 16:06:20 INFO] .SET file for ACQ96 ready
[Ingest 16:06:21 INFO] Starting acquisition
[Status 16:06:21 INFO] reading housekeeping
[Status 16:06:39 INFO] acquire complete
[Status 16:06:40 INFO] writing housekeeping
[Sequencer 16:06:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:06:40 INFO] incremented H scene to 290 completed views
[Sequencer 16:06:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:06:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:06:40 INFO] incremented to [AERI set: name S290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:06:40 INFO] H290.SIG(18)
[sigmove 16:06:40 DEBUG] transformed H290Ma.SPC -> H290MA.SPC
[sigmove 16:06:40 DEBUG] transformed H290Mb.SPC -> H290MB.SPC
[sigmove 16:06:40 DEBUG] transformed H290Mc.SPC -> H290MC.SPC
[sigmove 16:06:40 DEBUG] transformed H290Md.SPC -> H290MD.SPC
[sigmove 16:06:40 DEBUG] transformed H290Me.SPC -> H290ME.SPC
[sigmove 16:06:40 DEBUG] transformed H290Mf.SPC -> H290MF.SPC
[Status 16:06:40 INFO] data for H290 transferred to science data processing
[Tidy 16:06:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:06:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:06:40 INFO] resetting WatchDogTimer
[Status 16:06:40 INFO] Starting Set [AERI set: name S290, 6 scans, 0 angle, D16300 command]
[Ingest 16:06:40 INFO] Sending XML status message
[Status 16:06:40 INFO] Mirror angle: 0
[Mirror 16:06:41 INFO] rotating to position S
[Status 16:06:42 INFO] .SET file for ACQ96 ready
[Ingest 16:06:42 INFO] Starting acquisition
[Status 16:06:42 INFO] reading housekeeping
[Status 16:07:00 INFO] acquire complete
[Status 16:07:01 INFO] writing housekeeping
[Sequencer 16:07:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:07:01 INFO] incremented S scene to 290 completed views
[Sequencer 16:07:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:07:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:07:01 INFO] incremented to [AERI set: name T290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:07:01 INFO] S290.SIG(18)
[sigmove 16:07:01 DEBUG] transformed S290Ma.SPC -> S290MA.SPC
[sigmove 16:07:01 DEBUG] transformed S290Mb.SPC -> S290MB.SPC
[sigmove 16:07:01 DEBUG] transformed S290Mc.SPC -> S290MC.SPC
[sigmove 16:07:01 DEBUG] transformed S290Md.SPC -> S290MD.SPC
[sigmove 16:07:01 DEBUG] transformed S290Me.SPC -> S290ME.SPC
[sigmove 16:07:01 DEBUG] transformed S290Mf.SPC -> S290MF.SPC
[Status 16:07:01 INFO] data for S290 transferred to science data processing
[Tidy 16:07:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:07:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:07:01 INFO] resetting WatchDogTimer
[Status 16:07:02 INFO] Starting Set [AERI set: name T290, 6 scans, 0 angle, D16300 command]
[Ingest 16:07:02 INFO] Sending XML status message
[Status 16:07:02 INFO] Mirror angle: 0
[Mirror 16:07:02 INFO] rotating to position T
[Status 16:07:03 INFO] .SET file for ACQ96 ready
[Ingest 16:07:03 INFO] Starting acquisition
[Status 16:07:03 INFO] reading housekeeping
[Status 16:07:20 INFO] acquire complete
[Status 16:07:21 INFO] writing housekeeping
[Sequencer 16:07:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:07:21 INFO] incremented T scene to 290 completed views
[Sequencer 16:07:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:07:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:07:21 INFO] incremented to [AERI set: name U290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:07:21 INFO] T290.SIG(18)
[sigmove 16:07:21 DEBUG] transformed T290Ma.SPC -> T290MA.SPC
[sigmove 16:07:21 DEBUG] transformed T290Mb.SPC -> T290MB.SPC
[sigmove 16:07:21 DEBUG] transformed T290Mc.SPC -> T290MC.SPC
[sigmove 16:07:21 DEBUG] transformed T290Md.SPC -> T290MD.SPC
[sigmove 16:07:21 DEBUG] transformed T290Me.SPC -> T290ME.SPC
[sigmove 16:07:21 DEBUG] transformed T290Mf.SPC -> T290MF.SPC
[Status 16:07:21 INFO] data for T290 transferred to science data processing
[Tidy 16:07:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:07:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:07:21 INFO] resetting WatchDogTimer
[Status 16:07:22 INFO] Starting Set [AERI set: name U290, 6 scans, 0 angle, D16300 command]
[Ingest 16:07:22 INFO] Sending XML status message
[Status 16:07:22 INFO] Mirror angle: 0
[Mirror 16:07:22 INFO] rotating to position U
[Status 16:07:23 INFO] .SET file for ACQ96 ready
[Ingest 16:07:23 INFO] Starting acquisition
[Status 16:07:23 INFO] reading housekeeping
[Status 16:07:41 INFO] acquire complete
[Status 16:07:42 INFO] writing housekeeping
[Sequencer 16:07:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:07:42 INFO] incremented U scene to 290 completed views
[Sequencer 16:07:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:07:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:07:42 INFO] incremented to [AERI set: name V290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:07:42 INFO] U290.SIG(18)
[sigmove 16:07:42 DEBUG] transformed U290Ma.SPC -> U290MA.SPC
[sigmove 16:07:42 DEBUG] transformed U290Mb.SPC -> U290MB.SPC
[sigmove 16:07:42 DEBUG] transformed U290Mc.SPC -> U290MC.SPC
[sigmove 16:07:42 DEBUG] transformed U290Md.SPC -> U290MD.SPC
[sigmove 16:07:42 DEBUG] transformed U290Me.SPC -> U290ME.SPC
[sigmove 16:07:42 DEBUG] transformed U290Mf.SPC -> U290MF.SPC
[Status 16:07:42 INFO] data for U290 transferred to science data processing
[Tidy 16:07:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:07:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:07:42 INFO] resetting WatchDogTimer
[Status 16:07:42 INFO] Starting Set [AERI set: name V290, 6 scans, 0 angle, D16300 command]
[Ingest 16:07:42 INFO] Sending XML status message
[Status 16:07:42 INFO] Mirror angle: 0
[Mirror 16:07:42 INFO] rotating to position V
[Status 16:07:43 INFO] .SET file for ACQ96 ready
[Ingest 16:07:43 INFO] Starting acquisition
[Status 16:07:44 INFO] reading housekeeping
[Status 16:08:01 INFO] acquire complete
[Status 16:08:02 INFO] writing housekeeping
[Sequencer 16:08:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:08:02 INFO] incremented V scene to 290 completed views
[Sequencer 16:08:02 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:08:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:08:02 INFO] incremented to [AERI set: name W290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:08:02 INFO] V290.SIG(18)
[sigmove 16:08:02 DEBUG] transformed V290Ma.SPC -> V290MA.SPC
[sigmove 16:08:02 DEBUG] transformed V290Mb.SPC -> V290MB.SPC
[sigmove 16:08:02 DEBUG] transformed V290Mc.SPC -> V290MC.SPC
[sigmove 16:08:02 DEBUG] transformed V290Md.SPC -> V290MD.SPC
[sigmove 16:08:02 DEBUG] transformed V290Me.SPC -> V290ME.SPC
[sigmove 16:08:02 DEBUG] transformed V290Mf.SPC -> V290MF.SPC
[Status 16:08:02 INFO] data for V290 transferred to science data processing
[Tidy 16:08:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:08:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:08:02 INFO] resetting WatchDogTimer
[Status 16:08:02 INFO] Starting Set [AERI set: name W290, 6 scans, 0 angle, D16300 command]
[Ingest 16:08:02 INFO] Sending XML status message
[Status 16:08:02 INFO] Mirror angle: 0
[Mirror 16:08:03 INFO] rotating to position W
[Status 16:08:03 INFO] .SET file for ACQ96 ready
[Ingest 16:08:03 INFO] Starting acquisition
[Status 16:08:04 INFO] reading housekeeping
[Status 16:08:21 INFO] acquire complete
[Status 16:08:22 INFO] writing housekeeping
[Sequencer 16:08:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:08:22 INFO] incremented W scene to 290 completed views
[Sequencer 16:08:22 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:08:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:08:22 INFO] incremented to [AERI set: name X290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:08:22 INFO] W290.SIG(18)
[sigmove 16:08:22 DEBUG] transformed W290Ma.SPC -> W290MA.SPC
[sigmove 16:08:22 DEBUG] transformed W290Mb.SPC -> W290MB.SPC
[sigmove 16:08:22 DEBUG] transformed W290Mc.SPC -> W290MC.SPC
[sigmove 16:08:22 DEBUG] transformed W290Md.SPC -> W290MD.SPC
[sigmove 16:08:22 DEBUG] transformed W290Me.SPC -> W290ME.SPC
[sigmove 16:08:22 DEBUG] transformed W290Mf.SPC -> W290MF.SPC
[Status 16:08:22 INFO] data for W290 transferred to science data processing
[Tidy 16:08:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:08:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:08:22 INFO] resetting WatchDogTimer
[Status 16:08:22 INFO] Starting Set [AERI set: name X290, 6 scans, 0 angle, D16300 command]
[Ingest 16:08:22 INFO] Sending XML status message
[Status 16:08:23 INFO] Mirror angle: 0
[Mirror 16:08:23 INFO] rotating to position X
[Status 16:08:23 INFO] .SET file for ACQ96 ready
[Ingest 16:08:24 INFO] Starting acquisition
[Status 16:08:24 INFO] reading housekeeping
[Status 16:08:41 INFO] acquire complete
[Status 16:08:42 INFO] writing housekeeping
[Sequencer 16:08:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:08:42 INFO] incremented X scene to 290 completed views
[Sequencer 16:08:42 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:08:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:08:42 INFO] incremented to [AERI set: name Y290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:08:42 INFO] X290.SIG(18)
[sigmove 16:08:42 DEBUG] transformed X290Ma.SPC -> X290MA.SPC
[sigmove 16:08:42 DEBUG] transformed X290Mb.SPC -> X290MB.SPC
[sigmove 16:08:42 DEBUG] transformed X290Mc.SPC -> X290MC.SPC
[sigmove 16:08:42 DEBUG] transformed X290Md.SPC -> X290MD.SPC
[sigmove 16:08:42 DEBUG] transformed X290Me.SPC -> X290ME.SPC
[sigmove 16:08:42 DEBUG] transformed X290Mf.SPC -> X290MF.SPC
[Status 16:08:42 INFO] data for X290 transferred to science data processing
[Tidy 16:08:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:08:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:08:42 INFO] resetting WatchDogTimer
[Status 16:08:43 INFO] Starting Set [AERI set: name Y290, 6 scans, 0 angle, D16300 command]
[Ingest 16:08:43 INFO] Sending XML status message
[Status 16:08:43 INFO] Mirror angle: 0
[Mirror 16:08:43 INFO] rotating to position Y
[Status 16:08:44 INFO] .SET file for ACQ96 ready
[Ingest 16:08:44 INFO] Starting acquisition
[Status 16:08:44 INFO] reading housekeeping
[Status 16:09:01 INFO] acquire complete
[Status 16:09:02 INFO] writing housekeeping
[Sequencer 16:09:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:09:02 INFO] incremented Y scene to 290 completed views
[Sequencer 16:09:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:09:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:09:02 INFO] incremented to [AERI set: name Z290, 6 scans, 0 angle, D16300 command] set
[sigmove 16:09:02 INFO] Y290.SIG(18)
[sigmove 16:09:02 DEBUG] transformed Y290Ma.SPC -> Y290MA.SPC
[sigmove 16:09:02 DEBUG] transformed Y290Mb.SPC -> Y290MB.SPC
[sigmove 16:09:02 DEBUG] transformed Y290Mc.SPC -> Y290MC.SPC
[sigmove 16:09:02 DEBUG] transformed Y290Md.SPC -> Y290MD.SPC
[sigmove 16:09:02 DEBUG] transformed Y290Me.SPC -> Y290ME.SPC
[sigmove 16:09:02 DEBUG] transformed Y290Mf.SPC -> Y290MF.SPC
[Status 16:09:02 INFO] data for Y290 transferred to science data processing
[Tidy 16:09:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:09:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:09:02 INFO] resetting WatchDogTimer
[Status 16:09:03 INFO] Starting Set [AERI set: name Z290, 6 scans, 0 angle, D16300 command]
[Ingest 16:09:03 INFO] Sending XML status message
[Status 16:09:03 INFO] Mirror angle: 0
[Mirror 16:09:03 INFO] rotating to position Z
[Status 16:09:04 INFO] .SET file for ACQ96 ready
[Ingest 16:09:04 INFO] Starting acquisition
[Status 16:09:04 INFO] reading housekeeping
[Status 16:09:22 INFO] acquire complete
[Status 16:09:23 INFO] writing housekeeping
[Sequencer 16:09:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:09:23 INFO] incremented Z scene to 290 completed views
[Sequencer 16:09:23 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:09:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:09:23 INFO] incremented to [AERI set: name H291, 6 scans, 60 angle, D22500 command] set
[sigmove 16:09:23 INFO] Z290.SIG(18)
[sigmove 16:09:23 DEBUG] transformed Z290Ma.SPC -> Z290MA.SPC
[sigmove 16:09:23 DEBUG] transformed Z290Mb.SPC -> Z290MB.SPC
[sigmove 16:09:23 DEBUG] transformed Z290Mc.SPC -> Z290MC.SPC
[sigmove 16:09:23 DEBUG] transformed Z290Md.SPC -> Z290MD.SPC
[sigmove 16:09:23 DEBUG] transformed Z290Me.SPC -> Z290ME.SPC
[sigmove 16:09:23 DEBUG] transformed Z290Mf.SPC -> Z290MF.SPC
[Status 16:09:23 INFO] data for Z290 transferred to science data processing
[Tidy 16:09:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:09:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:09:23 INFO] resetting WatchDogTimer
[Status 16:09:23 INFO] Starting Set [AERI set: name H291, 6 scans, 60 angle, D22500 command]
[Ingest 16:09:23 INFO] Sending XML status message
[Status 16:09:23 INFO] Mirror angle: 60
[Mirror 16:09:23 INFO] rotating to position H
[Status 16:09:24 INFO] .SET file for ACQ96 ready
[Ingest 16:09:25 INFO] Starting acquisition
[Status 16:09:25 INFO] reading housekeeping
[Status 16:09:43 INFO] acquire complete
[Status 16:09:44 INFO] writing housekeeping
[Sequencer 16:09:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:09:44 INFO] incremented H scene to 291 completed views
[Sequencer 16:09:44 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:09:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:09:44 INFO] incremented to [AERI set: name A291, 6 scans, 120 angle, D28300 command] set
[sigmove 16:09:44 INFO] H291.SIG(18)
[sigmove 16:09:44 DEBUG] transformed H291Ma.SPC -> H291MA.SPC
[sigmove 16:09:44 DEBUG] transformed H291Mb.SPC -> H291MB.SPC
[sigmove 16:09:44 DEBUG] transformed H291Mc.SPC -> H291MC.SPC
[sigmove 16:09:44 DEBUG] transformed H291Md.SPC -> H291MD.SPC
[sigmove 16:09:44 DEBUG] transformed H291Me.SPC -> H291ME.SPC
[sigmove 16:09:44 DEBUG] transformed H291Mf.SPC -> H291MF.SPC
[Status 16:09:44 INFO] data for H291 transferred to science data processing
[Tidy 16:09:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:09:44 INFO] A289.FIN(19),H289.FIN(19),S289.FIN(19),T289.FIN(19),U289.FIN(19),V289.FIN(19),W289.FIN(19),X289.FIN(19),Y289.FIN(19),Z289.FIN(19),A290.FIN(19),H290.FIN(19),S290.FIN(19),T290.FIN(19),U290.FIN(19),V290.FIN(19),W290.FIN(19),X290.FIN(19),Y290.FIN(19),Z290.FIN(19)
[sigmove 16:09:44 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:09:44 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:09:49 DEBUG] done zipping
[WatchDog 16:09:49 INFO] resetting WatchDogTimer
[Status 16:09:50 INFO] Starting Set [AERI set: name A291, 6 scans, 120 angle, D28300 command]
[Ingest 16:09:50 INFO] Sending XML status message
[Status 16:09:50 INFO] Mirror angle: 120
[Mirror 16:09:50 INFO] rotating to position A
[Status 16:09:51 INFO] .SET file for ACQ96 ready
[Ingest 16:09:52 INFO] Starting acquisition
[Status 16:09:52 INFO] reading housekeeping
[Status 16:10:10 INFO] acquire complete
[Status 16:10:11 INFO] writing housekeeping
[Sequencer 16:10:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:10:11 INFO] incremented A scene to 291 completed views
[Sequencer 16:10:11 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:10:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:10:11 INFO] incremented to [AERI set: name S291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:10:11 INFO] A291.SIG(18)
[sigmove 16:10:11 DEBUG] transformed A291Ma.SPC -> A291MA.SPC
[sigmove 16:10:11 DEBUG] transformed A291Mb.SPC -> A291MB.SPC
[sigmove 16:10:11 DEBUG] transformed A291Mc.SPC -> A291MC.SPC
[sigmove 16:10:11 DEBUG] transformed A291Md.SPC -> A291MD.SPC
[sigmove 16:10:11 DEBUG] transformed A291Me.SPC -> A291ME.SPC
[sigmove 16:10:11 DEBUG] transformed A291Mf.SPC -> A291MF.SPC
[Status 16:10:11 INFO] data for A291 transferred to science data processing
[Tidy 16:10:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:10:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:10:11 INFO] resetting WatchDogTimer
[Status 16:10:11 INFO] Starting Set [AERI set: name S291, 6 scans, 0 angle, D16300 command]
[Ingest 16:10:11 INFO] Sending XML status message
[Status 16:10:11 INFO] Mirror angle: 0
[Mirror 16:10:12 INFO] rotating to position S
[Status 16:10:13 INFO] .SET file for ACQ96 ready
[Ingest 16:10:14 INFO] Starting acquisition
[Status 16:10:14 INFO] reading housekeeping
[Status 16:10:31 INFO] acquire complete
[Status 16:10:32 INFO] writing housekeeping
[Sequencer 16:10:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:10:32 INFO] incremented S scene to 291 completed views
[Sequencer 16:10:32 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:10:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:10:32 INFO] incremented to [AERI set: name T291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:10:32 INFO] S291.SIG(18)
[sigmove 16:10:32 DEBUG] transformed S291Ma.SPC -> S291MA.SPC
[sigmove 16:10:32 DEBUG] transformed S291Mb.SPC -> S291MB.SPC
[sigmove 16:10:32 DEBUG] transformed S291Mc.SPC -> S291MC.SPC
[sigmove 16:10:32 DEBUG] transformed S291Md.SPC -> S291MD.SPC
[sigmove 16:10:32 DEBUG] transformed S291Me.SPC -> S291ME.SPC
[sigmove 16:10:32 DEBUG] transformed S291Mf.SPC -> S291MF.SPC
[Status 16:10:32 INFO] data for S291 transferred to science data processing
[Tidy 16:10:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:10:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:10:32 INFO] resetting WatchDogTimer
[Status 16:10:33 INFO] Starting Set [AERI set: name T291, 6 scans, 0 angle, D16300 command]
[Ingest 16:10:33 INFO] Sending XML status message
[Status 16:10:33 INFO] Mirror angle: 0
[Mirror 16:10:33 INFO] rotating to position T
[Status 16:10:34 INFO] .SET file for ACQ96 ready
[Ingest 16:10:34 INFO] Starting acquisition
[Status 16:10:34 INFO] reading housekeeping
[Status 16:10:51 INFO] acquire complete
[Status 16:10:52 INFO] writing housekeeping
[Sequencer 16:10:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:10:52 INFO] incremented T scene to 291 completed views
[Sequencer 16:10:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:10:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:10:52 INFO] incremented to [AERI set: name U291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:10:52 INFO] T291.SIG(18)
[sigmove 16:10:52 DEBUG] transformed T291Ma.SPC -> T291MA.SPC
[sigmove 16:10:52 DEBUG] transformed T291Mb.SPC -> T291MB.SPC
[sigmove 16:10:52 DEBUG] transformed T291Mc.SPC -> T291MC.SPC
[sigmove 16:10:52 DEBUG] transformed T291Md.SPC -> T291MD.SPC
[sigmove 16:10:52 DEBUG] transformed T291Me.SPC -> T291ME.SPC
[sigmove 16:10:52 DEBUG] transformed T291Mf.SPC -> T291MF.SPC
[Status 16:10:52 INFO] data for T291 transferred to science data processing
[Tidy 16:10:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:10:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:10:52 INFO] resetting WatchDogTimer
[Status 16:10:53 INFO] Starting Set [AERI set: name U291, 6 scans, 0 angle, D16300 command]
[Ingest 16:10:53 INFO] Sending XML status message
[Status 16:10:53 INFO] Mirror angle: 0
[Mirror 16:10:53 INFO] rotating to position U
[Status 16:10:54 INFO] .SET file for ACQ96 ready
[Ingest 16:10:54 INFO] Starting acquisition
[Status 16:10:54 INFO] reading housekeeping
[Status 16:11:12 INFO] acquire complete
[Status 16:11:13 INFO] writing housekeeping
[Sequencer 16:11:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:11:13 INFO] incremented U scene to 291 completed views
[Sequencer 16:11:13 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:11:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:11:13 INFO] incremented to [AERI set: name V291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:11:13 INFO] U291.SIG(18)
[sigmove 16:11:13 DEBUG] transformed U291Ma.SPC -> U291MA.SPC
[sigmove 16:11:13 DEBUG] transformed U291Mb.SPC -> U291MB.SPC
[sigmove 16:11:13 DEBUG] transformed U291Mc.SPC -> U291MC.SPC
[sigmove 16:11:13 DEBUG] transformed U291Md.SPC -> U291MD.SPC
[sigmove 16:11:13 DEBUG] transformed U291Me.SPC -> U291ME.SPC
[sigmove 16:11:13 DEBUG] transformed U291Mf.SPC -> U291MF.SPC
[Status 16:11:13 INFO] data for U291 transferred to science data processing
[Tidy 16:11:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:11:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:11:13 INFO] resetting WatchDogTimer
[Status 16:11:13 INFO] Starting Set [AERI set: name V291, 6 scans, 0 angle, D16300 command]
[Ingest 16:11:13 INFO] Sending XML status message
[Status 16:11:13 INFO] Mirror angle: 0
[Mirror 16:11:13 INFO] rotating to position V
[Status 16:11:14 INFO] .SET file for ACQ96 ready
[Ingest 16:11:14 INFO] Starting acquisition
[Status 16:11:15 INFO] reading housekeeping
[Status 16:11:33 INFO] acquire complete
[Status 16:11:34 INFO] writing housekeeping
[Sequencer 16:11:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:11:34 INFO] incremented V scene to 291 completed views
[Sequencer 16:11:34 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:11:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:11:34 INFO] incremented to [AERI set: name W291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:11:34 INFO] V291.SIG(18)
[sigmove 16:11:34 DEBUG] transformed V291Ma.SPC -> V291MA.SPC
[sigmove 16:11:34 DEBUG] transformed V291Mb.SPC -> V291MB.SPC
[sigmove 16:11:34 DEBUG] transformed V291Mc.SPC -> V291MC.SPC
[sigmove 16:11:34 DEBUG] transformed V291Md.SPC -> V291MD.SPC
[sigmove 16:11:34 DEBUG] transformed V291Me.SPC -> V291ME.SPC
[sigmove 16:11:34 DEBUG] transformed V291Mf.SPC -> V291MF.SPC
[Status 16:11:34 INFO] data for V291 transferred to science data processing
[Tidy 16:11:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:11:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:11:34 INFO] resetting WatchDogTimer
[Status 16:11:34 INFO] Starting Set [AERI set: name W291, 6 scans, 0 angle, D16300 command]
[Ingest 16:11:34 INFO] Sending XML status message
[Status 16:11:34 INFO] Mirror angle: 0
[Mirror 16:11:35 INFO] rotating to position W
[Status 16:11:35 INFO] .SET file for ACQ96 ready
[Ingest 16:11:36 INFO] Starting acquisition
[Status 16:11:36 INFO] reading housekeeping
[Status 16:11:53 INFO] acquire complete
[Status 16:11:54 INFO] writing housekeeping
[Sequencer 16:11:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:11:54 INFO] incremented W scene to 291 completed views
[Sequencer 16:11:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:11:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:11:54 INFO] incremented to [AERI set: name X291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:11:54 INFO] W291.SIG(18)
[sigmove 16:11:54 DEBUG] transformed W291Ma.SPC -> W291MA.SPC
[sigmove 16:11:54 DEBUG] transformed W291Mb.SPC -> W291MB.SPC
[sigmove 16:11:54 DEBUG] transformed W291Mc.SPC -> W291MC.SPC
[sigmove 16:11:54 DEBUG] transformed W291Md.SPC -> W291MD.SPC
[sigmove 16:11:54 DEBUG] transformed W291Me.SPC -> W291ME.SPC
[sigmove 16:11:54 DEBUG] transformed W291Mf.SPC -> W291MF.SPC
[Status 16:11:54 INFO] data for W291 transferred to science data processing
[Tidy 16:11:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:11:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:11:54 INFO] resetting WatchDogTimer
[Status 16:11:55 INFO] Starting Set [AERI set: name X291, 6 scans, 0 angle, D16300 command]
[Ingest 16:11:55 INFO] Sending XML status message
[Status 16:11:55 INFO] Mirror angle: 0
[Mirror 16:11:55 INFO] rotating to position X
[Status 16:11:55 INFO] .SET file for ACQ96 ready
[Ingest 16:11:56 INFO] Starting acquisition
[Status 16:11:56 INFO] reading housekeeping
[Status 16:12:13 INFO] acquire complete
[Status 16:12:14 INFO] writing housekeeping
[Sequencer 16:12:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:12:14 INFO] incremented X scene to 291 completed views
[Sequencer 16:12:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:12:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:12:14 INFO] incremented to [AERI set: name Y291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:12:14 INFO] X291.SIG(18)
[sigmove 16:12:14 DEBUG] transformed X291Ma.SPC -> X291MA.SPC
[sigmove 16:12:14 DEBUG] transformed X291Mb.SPC -> X291MB.SPC
[sigmove 16:12:14 DEBUG] transformed X291Mc.SPC -> X291MC.SPC
[sigmove 16:12:14 DEBUG] transformed X291Md.SPC -> X291MD.SPC
[sigmove 16:12:14 DEBUG] transformed X291Me.SPC -> X291ME.SPC
[sigmove 16:12:14 DEBUG] transformed X291Mf.SPC -> X291MF.SPC
[Status 16:12:14 INFO] data for X291 transferred to science data processing
[Tidy 16:12:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:12:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:12:14 INFO] resetting WatchDogTimer
[Status 16:12:15 INFO] Starting Set [AERI set: name Y291, 6 scans, 0 angle, D16300 command]
[Ingest 16:12:15 INFO] Sending XML status message
[Status 16:12:15 INFO] Mirror angle: 0
[Mirror 16:12:15 INFO] rotating to position Y
[Status 16:12:16 INFO] .SET file for ACQ96 ready
[Ingest 16:12:16 INFO] Starting acquisition
[Status 16:12:16 INFO] reading housekeeping
[Status 16:12:34 INFO] acquire complete
[Status 16:12:35 INFO] writing housekeeping
[Sequencer 16:12:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:12:35 INFO] incremented Y scene to 291 completed views
[Sequencer 16:12:35 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:12:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:12:35 INFO] incremented to [AERI set: name Z291, 6 scans, 0 angle, D16300 command] set
[sigmove 16:12:35 INFO] Y291.SIG(18)
[sigmove 16:12:35 DEBUG] transformed Y291Ma.SPC -> Y291MA.SPC
[sigmove 16:12:35 DEBUG] transformed Y291Mb.SPC -> Y291MB.SPC
[sigmove 16:12:35 DEBUG] transformed Y291Mc.SPC -> Y291MC.SPC
[sigmove 16:12:35 DEBUG] transformed Y291Md.SPC -> Y291MD.SPC
[sigmove 16:12:35 DEBUG] transformed Y291Me.SPC -> Y291ME.SPC
[sigmove 16:12:35 DEBUG] transformed Y291Mf.SPC -> Y291MF.SPC
[Status 16:12:35 INFO] data for Y291 transferred to science data processing
[Tidy 16:12:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:12:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:12:35 INFO] resetting WatchDogTimer
[Status 16:12:35 INFO] Starting Set [AERI set: name Z291, 6 scans, 0 angle, D16300 command]
[Ingest 16:12:35 INFO] Sending XML status message
[Status 16:12:35 INFO] Mirror angle: 0
[Mirror 16:12:35 INFO] rotating to position Z
[Status 16:12:36 INFO] .SET file for ACQ96 ready
[Ingest 16:12:36 INFO] Starting acquisition
[Status 16:12:37 INFO] reading housekeeping
[Status 16:12:54 INFO] acquire complete
[Status 16:12:55 INFO] writing housekeeping
[Sequencer 16:12:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:12:55 INFO] incremented Z scene to 291 completed views
[Sequencer 16:12:55 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:12:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:12:55 INFO] incremented to [AERI set: name A292, 6 scans, 120 angle, D28300 command] set
[sigmove 16:12:55 INFO] Z291.SIG(18)
[sigmove 16:12:55 DEBUG] transformed Z291Ma.SPC -> Z291MA.SPC
[sigmove 16:12:55 DEBUG] transformed Z291Mb.SPC -> Z291MB.SPC
[sigmove 16:12:55 DEBUG] transformed Z291Mc.SPC -> Z291MC.SPC
[sigmove 16:12:55 DEBUG] transformed Z291Md.SPC -> Z291MD.SPC
[sigmove 16:12:55 DEBUG] transformed Z291Me.SPC -> Z291ME.SPC
[sigmove 16:12:55 DEBUG] transformed Z291Mf.SPC -> Z291MF.SPC
[Status 16:12:55 INFO] data for Z291 transferred to science data processing
[Tidy 16:12:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:12:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:12:55 INFO] resetting WatchDogTimer
[Status 16:12:55 INFO] Starting Set [AERI set: name A292, 6 scans, 120 angle, D28300 command]
[Ingest 16:12:55 INFO] Sending XML status message
[Status 16:12:55 INFO] Mirror angle: 120
[Mirror 16:12:56 INFO] rotating to position A
[Status 16:12:57 INFO] .SET file for ACQ96 ready
[Ingest 16:12:57 INFO] Starting acquisition
[Status 16:12:58 INFO] reading housekeeping
[Status 16:13:15 INFO] acquire complete
[Status 16:13:16 INFO] writing housekeeping
[Sequencer 16:13:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:13:16 INFO] incremented A scene to 292 completed views
[Sequencer 16:13:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:13:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:13:16 INFO] incremented to [AERI set: name H292, 6 scans, 60 angle, D22500 command] set
[sigmove 16:13:16 INFO] A292.SIG(18)
[sigmove 16:13:16 DEBUG] transformed A292Ma.SPC -> A292MA.SPC
[sigmove 16:13:16 DEBUG] transformed A292Mb.SPC -> A292MB.SPC
[sigmove 16:13:16 DEBUG] transformed A292Mc.SPC -> A292MC.SPC
[sigmove 16:13:16 DEBUG] transformed A292Md.SPC -> A292MD.SPC
[sigmove 16:13:16 DEBUG] transformed A292Me.SPC -> A292ME.SPC
[sigmove 16:13:16 DEBUG] transformed A292Mf.SPC -> A292MF.SPC
[Status 16:13:16 INFO] data for A292 transferred to science data processing
[Tidy 16:13:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:13:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:13:16 INFO] resetting WatchDogTimer
[Status 16:13:16 INFO] Starting Set [AERI set: name H292, 6 scans, 60 angle, D22500 command]
[Ingest 16:13:16 INFO] Sending XML status message
[Status 16:13:16 INFO] Mirror angle: 60
[Mirror 16:13:17 INFO] rotating to position H
[Status 16:13:18 INFO] .SET file for ACQ96 ready
[Ingest 16:13:18 INFO] Starting acquisition
[Status 16:13:19 INFO] reading housekeeping
[Status 16:13:36 INFO] acquire complete
[Status 16:13:37 INFO] writing housekeeping
[Sequencer 16:13:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:13:37 INFO] incremented H scene to 292 completed views
[Sequencer 16:13:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:13:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:13:37 INFO] incremented to [AERI set: name S292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:13:37 INFO] H292.SIG(18)
[sigmove 16:13:37 DEBUG] transformed H292Ma.SPC -> H292MA.SPC
[sigmove 16:13:37 DEBUG] transformed H292Mb.SPC -> H292MB.SPC
[sigmove 16:13:37 DEBUG] transformed H292Mc.SPC -> H292MC.SPC
[sigmove 16:13:37 DEBUG] transformed H292Md.SPC -> H292MD.SPC
[sigmove 16:13:37 DEBUG] transformed H292Me.SPC -> H292ME.SPC
[sigmove 16:13:37 DEBUG] transformed H292Mf.SPC -> H292MF.SPC
[Status 16:13:37 INFO] data for H292 transferred to science data processing
[Tidy 16:13:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:13:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:13:37 INFO] resetting WatchDogTimer
[Status 16:13:38 INFO] Starting Set [AERI set: name S292, 6 scans, 0 angle, D16300 command]
[Ingest 16:13:38 INFO] Sending XML status message
[Status 16:13:38 INFO] Mirror angle: 0
[Mirror 16:13:38 INFO] rotating to position S
[Status 16:13:39 INFO] .SET file for ACQ96 ready
[Ingest 16:13:40 INFO] Starting acquisition
[Status 16:13:40 INFO] reading housekeeping
[Status 16:13:58 INFO] acquire complete
[Status 16:13:59 INFO] writing housekeeping
[Sequencer 16:13:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:13:59 INFO] incremented S scene to 292 completed views
[Sequencer 16:13:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:13:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:13:59 INFO] incremented to [AERI set: name T292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:13:59 INFO] S292.SIG(18)
[sigmove 16:13:59 DEBUG] transformed S292Ma.SPC -> S292MA.SPC
[sigmove 16:13:59 DEBUG] transformed S292Mb.SPC -> S292MB.SPC
[sigmove 16:13:59 DEBUG] transformed S292Mc.SPC -> S292MC.SPC
[sigmove 16:13:59 DEBUG] transformed S292Md.SPC -> S292MD.SPC
[sigmove 16:13:59 DEBUG] transformed S292Me.SPC -> S292ME.SPC
[sigmove 16:13:59 DEBUG] transformed S292Mf.SPC -> S292MF.SPC
[Status 16:13:59 INFO] data for S292 transferred to science data processing
[Tidy 16:13:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:13:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:13:59 INFO] resetting WatchDogTimer
[Status 16:14:00 INFO] Starting Set [AERI set: name T292, 6 scans, 0 angle, D16300 command]
[Ingest 16:14:00 INFO] Sending XML status message
[Status 16:14:00 INFO] Mirror angle: 0
[Mirror 16:14:00 INFO] rotating to position T
[Status 16:14:01 INFO] .SET file for ACQ96 ready
[Ingest 16:14:01 INFO] Starting acquisition
[Status 16:14:01 INFO] reading housekeeping
[Status 16:14:19 INFO] acquire complete
[Status 16:14:20 INFO] writing housekeeping
[Sequencer 16:14:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:14:20 INFO] incremented T scene to 292 completed views
[Sequencer 16:14:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:14:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:14:20 INFO] incremented to [AERI set: name U292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:14:20 INFO] T292.SIG(18)
[sigmove 16:14:20 DEBUG] transformed T292Ma.SPC -> T292MA.SPC
[sigmove 16:14:20 DEBUG] transformed T292Mb.SPC -> T292MB.SPC
[sigmove 16:14:20 DEBUG] transformed T292Mc.SPC -> T292MC.SPC
[sigmove 16:14:20 DEBUG] transformed T292Md.SPC -> T292MD.SPC
[sigmove 16:14:20 DEBUG] transformed T292Me.SPC -> T292ME.SPC
[sigmove 16:14:20 DEBUG] transformed T292Mf.SPC -> T292MF.SPC
[Status 16:14:20 INFO] data for T292 transferred to science data processing
[Tidy 16:14:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:14:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:14:20 INFO] resetting WatchDogTimer
[Status 16:14:20 INFO] Starting Set [AERI set: name U292, 6 scans, 0 angle, D16300 command]
[Ingest 16:14:20 INFO] Sending XML status message
[Status 16:14:20 INFO] Mirror angle: 0
[Mirror 16:14:21 INFO] rotating to position U
[Status 16:14:21 INFO] .SET file for ACQ96 ready
[Ingest 16:14:22 INFO] Starting acquisition
[Status 16:14:22 INFO] reading housekeeping
[Status 16:14:39 INFO] acquire complete
[Status 16:14:40 INFO] writing housekeeping
[Sequencer 16:14:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:14:40 INFO] incremented U scene to 292 completed views
[Sequencer 16:14:40 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:14:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:14:40 INFO] incremented to [AERI set: name V292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:14:40 INFO] U292.SIG(18)
[sigmove 16:14:40 DEBUG] transformed U292Ma.SPC -> U292MA.SPC
[sigmove 16:14:40 DEBUG] transformed U292Mb.SPC -> U292MB.SPC
[sigmove 16:14:40 DEBUG] transformed U292Mc.SPC -> U292MC.SPC
[sigmove 16:14:40 DEBUG] transformed U292Md.SPC -> U292MD.SPC
[sigmove 16:14:40 DEBUG] transformed U292Me.SPC -> U292ME.SPC
[sigmove 16:14:40 DEBUG] transformed U292Mf.SPC -> U292MF.SPC
[Status 16:14:40 INFO] data for U292 transferred to science data processing
[Tidy 16:14:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:14:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:14:40 INFO] resetting WatchDogTimer
[Status 16:14:41 INFO] Starting Set [AERI set: name V292, 6 scans, 0 angle, D16300 command]
[Ingest 16:14:41 INFO] Sending XML status message
[Status 16:14:41 INFO] Mirror angle: 0
[Mirror 16:14:41 INFO] rotating to position V
[Status 16:14:42 INFO] .SET file for ACQ96 ready
[Ingest 16:14:42 INFO] Starting acquisition
[Status 16:14:42 INFO] reading housekeeping
[Status 16:14:59 INFO] acquire complete
[Status 16:15:00 INFO] writing housekeeping
[Sequencer 16:15:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:15:00 INFO] incremented V scene to 292 completed views
[Sequencer 16:15:00 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:15:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:15:00 INFO] incremented to [AERI set: name W292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:15:00 INFO] V292.SIG(18)
[sigmove 16:15:00 DEBUG] transformed V292Ma.SPC -> V292MA.SPC
[sigmove 16:15:00 DEBUG] transformed V292Mb.SPC -> V292MB.SPC
[sigmove 16:15:00 DEBUG] transformed V292Mc.SPC -> V292MC.SPC
[sigmove 16:15:00 DEBUG] transformed V292Md.SPC -> V292MD.SPC
[sigmove 16:15:00 DEBUG] transformed V292Me.SPC -> V292ME.SPC
[sigmove 16:15:00 DEBUG] transformed V292Mf.SPC -> V292MF.SPC
[Status 16:15:00 INFO] data for V292 transferred to science data processing
[Tidy 16:15:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:15:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:15:00 INFO] resetting WatchDogTimer
[Status 16:15:01 INFO] Starting Set [AERI set: name W292, 6 scans, 0 angle, D16300 command]
[Ingest 16:15:01 INFO] Sending XML status message
[Status 16:15:01 INFO] Mirror angle: 0
[Mirror 16:15:01 INFO] rotating to position W
[Status 16:15:02 INFO] .SET file for ACQ96 ready
[Ingest 16:15:02 INFO] Starting acquisition
[Status 16:15:02 INFO] reading housekeeping
[Status 16:15:20 INFO] acquire complete
[Status 16:15:21 INFO] writing housekeeping
[Sequencer 16:15:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:15:21 INFO] incremented W scene to 292 completed views
[Sequencer 16:15:21 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:15:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:15:21 INFO] incremented to [AERI set: name X292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:15:21 INFO] W292.SIG(18)
[sigmove 16:15:21 DEBUG] transformed W292Ma.SPC -> W292MA.SPC
[sigmove 16:15:21 DEBUG] transformed W292Mb.SPC -> W292MB.SPC
[sigmove 16:15:21 DEBUG] transformed W292Mc.SPC -> W292MC.SPC
[sigmove 16:15:21 DEBUG] transformed W292Md.SPC -> W292MD.SPC
[sigmove 16:15:21 DEBUG] transformed W292Me.SPC -> W292ME.SPC
[sigmove 16:15:21 DEBUG] transformed W292Mf.SPC -> W292MF.SPC
[Status 16:15:21 INFO] data for W292 transferred to science data processing
[Tidy 16:15:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:15:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:15:21 INFO] resetting WatchDogTimer
[Status 16:15:21 INFO] Starting Set [AERI set: name X292, 6 scans, 0 angle, D16300 command]
[Ingest 16:15:21 INFO] Sending XML status message
[Status 16:15:21 INFO] Mirror angle: 0
[Mirror 16:15:21 INFO] rotating to position X
[Status 16:15:22 INFO] .SET file for ACQ96 ready
[Ingest 16:15:22 INFO] Starting acquisition
[Status 16:15:23 INFO] reading housekeeping
[Status 16:15:40 INFO] acquire complete
[Status 16:15:41 INFO] writing housekeeping
[Sequencer 16:15:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:15:41 INFO] incremented X scene to 292 completed views
[Sequencer 16:15:41 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:15:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:15:41 INFO] incremented to [AERI set: name Y292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:15:41 INFO] X292.SIG(18)
[sigmove 16:15:41 DEBUG] transformed X292Ma.SPC -> X292MA.SPC
[sigmove 16:15:41 DEBUG] transformed X292Mb.SPC -> X292MB.SPC
[sigmove 16:15:41 DEBUG] transformed X292Mc.SPC -> X292MC.SPC
[sigmove 16:15:41 DEBUG] transformed X292Md.SPC -> X292MD.SPC
[sigmove 16:15:41 DEBUG] transformed X292Me.SPC -> X292ME.SPC
[sigmove 16:15:41 DEBUG] transformed X292Mf.SPC -> X292MF.SPC
[Status 16:15:41 INFO] data for X292 transferred to science data processing
[Tidy 16:15:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:15:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:15:41 INFO] resetting WatchDogTimer
[Status 16:15:41 INFO] Starting Set [AERI set: name Y292, 6 scans, 0 angle, D16300 command]
[Ingest 16:15:41 INFO] Sending XML status message
[Status 16:15:41 INFO] Mirror angle: 0
[Mirror 16:15:42 INFO] rotating to position Y
[Status 16:15:42 INFO] .SET file for ACQ96 ready
[Ingest 16:15:42 INFO] Starting acquisition
[Status 16:15:43 INFO] reading housekeeping
[Status 16:16:00 INFO] acquire complete
[Status 16:16:01 INFO] writing housekeeping
[Sequencer 16:16:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:16:01 INFO] incremented Y scene to 292 completed views
[Sequencer 16:16:01 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:16:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:16:01 INFO] incremented to [AERI set: name Z292, 6 scans, 0 angle, D16300 command] set
[sigmove 16:16:01 INFO] Y292.SIG(18)
[sigmove 16:16:01 DEBUG] transformed Y292Ma.SPC -> Y292MA.SPC
[sigmove 16:16:01 DEBUG] transformed Y292Mb.SPC -> Y292MB.SPC
[sigmove 16:16:01 DEBUG] transformed Y292Mc.SPC -> Y292MC.SPC
[sigmove 16:16:01 DEBUG] transformed Y292Md.SPC -> Y292MD.SPC
[sigmove 16:16:01 DEBUG] transformed Y292Me.SPC -> Y292ME.SPC
[sigmove 16:16:01 DEBUG] transformed Y292Mf.SPC -> Y292MF.SPC
[Status 16:16:01 INFO] data for Y292 transferred to science data processing
[Tidy 16:16:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:16:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:16:01 INFO] resetting WatchDogTimer
[Status 16:16:01 INFO] Starting Set [AERI set: name Z292, 6 scans, 0 angle, D16300 command]
[Ingest 16:16:01 INFO] Sending XML status message
[Status 16:16:01 INFO] Mirror angle: 0
[Mirror 16:16:02 INFO] rotating to position Z
[Status 16:16:02 INFO] .SET file for ACQ96 ready
[Ingest 16:16:03 INFO] Starting acquisition
[Status 16:16:03 INFO] reading housekeeping
[Status 16:16:20 INFO] acquire complete
[Status 16:16:21 INFO] writing housekeeping
[Sequencer 16:16:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:16:21 INFO] incremented Z scene to 292 completed views
[Sequencer 16:16:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:16:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:16:21 INFO] incremented to [AERI set: name H293, 6 scans, 60 angle, D22500 command] set
[sigmove 16:16:21 INFO] Z292.SIG(18)
[sigmove 16:16:21 DEBUG] transformed Z292Ma.SPC -> Z292MA.SPC
[sigmove 16:16:21 DEBUG] transformed Z292Mb.SPC -> Z292MB.SPC
[sigmove 16:16:21 DEBUG] transformed Z292Mc.SPC -> Z292MC.SPC
[sigmove 16:16:21 DEBUG] transformed Z292Md.SPC -> Z292MD.SPC
[sigmove 16:16:21 DEBUG] transformed Z292Me.SPC -> Z292ME.SPC
[sigmove 16:16:21 DEBUG] transformed Z292Mf.SPC -> Z292MF.SPC
[Status 16:16:21 INFO] data for Z292 transferred to science data processing
[Tidy 16:16:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:16:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:16:21 INFO] resetting WatchDogTimer
[Status 16:16:22 INFO] Starting Set [AERI set: name H293, 6 scans, 60 angle, D22500 command]
[Ingest 16:16:22 INFO] Sending XML status message
[Status 16:16:22 INFO] Mirror angle: 60
[Mirror 16:16:22 INFO] rotating to position H
[Status 16:16:23 INFO] .SET file for ACQ96 ready
[Ingest 16:16:23 INFO] Starting acquisition
[Status 16:16:24 INFO] reading housekeeping
[Status 16:16:42 INFO] acquire complete
[Status 16:16:43 INFO] writing housekeeping
[Sequencer 16:16:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:16:43 INFO] incremented H scene to 293 completed views
[Sequencer 16:16:43 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:16:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:16:43 INFO] incremented to [AERI set: name A293, 6 scans, 120 angle, D28300 command] set
[sigmove 16:16:43 INFO] H293.SIG(18)
[sigmove 16:16:43 DEBUG] transformed H293Ma.SPC -> H293MA.SPC
[sigmove 16:16:43 DEBUG] transformed H293Mb.SPC -> H293MB.SPC
[sigmove 16:16:43 DEBUG] transformed H293Mc.SPC -> H293MC.SPC
[sigmove 16:16:43 DEBUG] transformed H293Md.SPC -> H293MD.SPC
[sigmove 16:16:43 DEBUG] transformed H293Me.SPC -> H293ME.SPC
[sigmove 16:16:43 DEBUG] transformed H293Mf.SPC -> H293MF.SPC
[Status 16:16:43 INFO] data for H293 transferred to science data processing
[Tidy 16:16:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:16:43 INFO] A291.FIN(19),H291.FIN(19),S291.FIN(19),T291.FIN(19),U291.FIN(19),V291.FIN(19),W291.FIN(19),X291.FIN(19),Y291.FIN(19),Z291.FIN(19),A292.FIN(19),H292.FIN(19),S292.FIN(19),T292.FIN(19),U292.FIN(19),V292.FIN(19),W292.FIN(19),X292.FIN(19),Y292.FIN(19),Z292.FIN(19)
[sigmove 16:16:43 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:16:43 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:16:48 DEBUG] done zipping
[WatchDog 16:16:48 INFO] resetting WatchDogTimer
[Status 16:16:48 INFO] Starting Set [AERI set: name A293, 6 scans, 120 angle, D28300 command]
[Ingest 16:16:48 INFO] Sending XML status message
[Status 16:16:48 INFO] Mirror angle: 120
[Mirror 16:16:49 INFO] rotating to position A
[Status 16:16:50 INFO] .SET file for ACQ96 ready
[Ingest 16:16:50 INFO] Starting acquisition
[Status 16:16:50 INFO] reading housekeeping
[Status 16:17:08 INFO] acquire complete
[Status 16:17:09 INFO] writing housekeeping
[Sequencer 16:17:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:17:09 INFO] incremented A scene to 293 completed views
[Sequencer 16:17:09 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:17:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:17:09 INFO] incremented to [AERI set: name S293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:17:09 INFO] A293.SIG(18)
[sigmove 16:17:09 DEBUG] transformed A293Ma.SPC -> A293MA.SPC
[sigmove 16:17:09 DEBUG] transformed A293Mb.SPC -> A293MB.SPC
[sigmove 16:17:09 DEBUG] transformed A293Mc.SPC -> A293MC.SPC
[sigmove 16:17:09 DEBUG] transformed A293Md.SPC -> A293MD.SPC
[sigmove 16:17:09 DEBUG] transformed A293Me.SPC -> A293ME.SPC
[sigmove 16:17:09 DEBUG] transformed A293Mf.SPC -> A293MF.SPC
[Status 16:17:09 INFO] data for A293 transferred to science data processing
[Tidy 16:17:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:17:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:17:09 INFO] resetting WatchDogTimer
[Status 16:17:10 INFO] Starting Set [AERI set: name S293, 6 scans, 0 angle, D16300 command]
[Ingest 16:17:10 INFO] Sending XML status message
[Status 16:17:10 INFO] Mirror angle: 0
[Mirror 16:17:10 INFO] rotating to position S
[Status 16:17:12 INFO] .SET file for ACQ96 ready
[Ingest 16:17:12 INFO] Starting acquisition
[Status 16:17:13 INFO] reading housekeeping
[Status 16:17:31 INFO] acquire complete
[Status 16:17:32 INFO] writing housekeeping
[Sequencer 16:17:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:17:32 INFO] incremented S scene to 293 completed views
[Sequencer 16:17:32 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:17:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:17:32 INFO] incremented to [AERI set: name T293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:17:32 INFO] S293.SIG(18)
[sigmove 16:17:32 DEBUG] transformed S293Ma.SPC -> S293MA.SPC
[sigmove 16:17:32 DEBUG] transformed S293Mb.SPC -> S293MB.SPC
[sigmove 16:17:32 DEBUG] transformed S293Mc.SPC -> S293MC.SPC
[sigmove 16:17:32 DEBUG] transformed S293Md.SPC -> S293MD.SPC
[sigmove 16:17:32 DEBUG] transformed S293Me.SPC -> S293ME.SPC
[sigmove 16:17:32 DEBUG] transformed S293Mf.SPC -> S293MF.SPC
[Status 16:17:32 INFO] data for S293 transferred to science data processing
[Tidy 16:17:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:17:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:17:32 INFO] resetting WatchDogTimer
[Status 16:17:33 INFO] Starting Set [AERI set: name T293, 6 scans, 0 angle, D16300 command]
[Ingest 16:17:33 INFO] Sending XML status message
[Status 16:17:33 INFO] Mirror angle: 0
[Mirror 16:17:33 INFO] rotating to position T
[Status 16:17:33 INFO] .SET file for ACQ96 ready
[Ingest 16:17:34 INFO] Starting acquisition
[Status 16:17:34 INFO] reading housekeeping
[Status 16:17:52 INFO] acquire complete
[Status 16:17:53 INFO] writing housekeeping
[Sequencer 16:17:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:17:53 INFO] incremented T scene to 293 completed views
[Sequencer 16:17:53 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:17:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:17:53 INFO] incremented to [AERI set: name U293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:17:53 INFO] T293.SIG(18)
[sigmove 16:17:53 DEBUG] transformed T293Ma.SPC -> T293MA.SPC
[sigmove 16:17:53 DEBUG] transformed T293Mb.SPC -> T293MB.SPC
[sigmove 16:17:53 DEBUG] transformed T293Mc.SPC -> T293MC.SPC
[sigmove 16:17:53 DEBUG] transformed T293Md.SPC -> T293MD.SPC
[sigmove 16:17:53 DEBUG] transformed T293Me.SPC -> T293ME.SPC
[sigmove 16:17:53 DEBUG] transformed T293Mf.SPC -> T293MF.SPC
[Status 16:17:53 INFO] data for T293 transferred to science data processing
[Tidy 16:17:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:17:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:17:53 INFO] resetting WatchDogTimer
[Status 16:17:54 INFO] Starting Set [AERI set: name U293, 6 scans, 0 angle, D16300 command]
[Ingest 16:17:54 INFO] Sending XML status message
[Status 16:17:54 INFO] Mirror angle: 0
[Mirror 16:17:54 INFO] rotating to position U
[Status 16:17:55 INFO] .SET file for ACQ96 ready
[Ingest 16:17:55 INFO] Starting acquisition
[Status 16:17:55 INFO] reading housekeeping
[Status 16:18:12 INFO] acquire complete
[Status 16:18:13 INFO] writing housekeeping
[Sequencer 16:18:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:18:13 INFO] incremented U scene to 293 completed views
[Sequencer 16:18:13 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:18:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:18:13 INFO] incremented to [AERI set: name V293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:18:13 INFO] U293.SIG(18)
[sigmove 16:18:13 DEBUG] transformed U293Ma.SPC -> U293MA.SPC
[sigmove 16:18:13 DEBUG] transformed U293Mb.SPC -> U293MB.SPC
[sigmove 16:18:13 DEBUG] transformed U293Mc.SPC -> U293MC.SPC
[sigmove 16:18:13 DEBUG] transformed U293Md.SPC -> U293MD.SPC
[sigmove 16:18:13 DEBUG] transformed U293Me.SPC -> U293ME.SPC
[sigmove 16:18:13 DEBUG] transformed U293Mf.SPC -> U293MF.SPC
[Status 16:18:13 INFO] data for U293 transferred to science data processing
[Tidy 16:18:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:18:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:18:13 INFO] resetting WatchDogTimer
[Status 16:18:14 INFO] Starting Set [AERI set: name V293, 6 scans, 0 angle, D16300 command]
[Ingest 16:18:14 INFO] Sending XML status message
[Status 16:18:14 INFO] Mirror angle: 0
[Mirror 16:18:14 INFO] rotating to position V
[Status 16:18:15 INFO] .SET file for ACQ96 ready
[Ingest 16:18:15 INFO] Starting acquisition
[Status 16:18:15 INFO] reading housekeeping
[Status 16:18:33 INFO] acquire complete
[Status 16:18:34 INFO] writing housekeeping
[Sequencer 16:18:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:18:34 INFO] incremented V scene to 293 completed views
[Sequencer 16:18:34 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:18:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:18:34 INFO] incremented to [AERI set: name W293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:18:34 INFO] V293.SIG(18)
[sigmove 16:18:34 DEBUG] transformed V293Ma.SPC -> V293MA.SPC
[sigmove 16:18:34 DEBUG] transformed V293Mb.SPC -> V293MB.SPC
[sigmove 16:18:34 DEBUG] transformed V293Mc.SPC -> V293MC.SPC
[sigmove 16:18:34 DEBUG] transformed V293Md.SPC -> V293MD.SPC
[sigmove 16:18:34 DEBUG] transformed V293Me.SPC -> V293ME.SPC
[sigmove 16:18:34 DEBUG] transformed V293Mf.SPC -> V293MF.SPC
[Status 16:18:34 INFO] data for V293 transferred to science data processing
[Tidy 16:18:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:18:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:18:34 INFO] resetting WatchDogTimer
[Status 16:18:34 INFO] Starting Set [AERI set: name W293, 6 scans, 0 angle, D16300 command]
[Ingest 16:18:34 INFO] Sending XML status message
[Status 16:18:34 INFO] Mirror angle: 0
[Mirror 16:18:34 INFO] rotating to position W
[Status 16:18:35 INFO] .SET file for ACQ96 ready
[Ingest 16:18:35 INFO] Starting acquisition
[Status 16:18:36 INFO] reading housekeeping
[Status 16:18:53 INFO] acquire complete
[Status 16:18:54 INFO] writing housekeeping
[Sequencer 16:18:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:18:54 INFO] incremented W scene to 293 completed views
[Sequencer 16:18:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:18:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:18:54 INFO] incremented to [AERI set: name X293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:18:54 INFO] W293.SIG(18)
[sigmove 16:18:54 DEBUG] transformed W293Ma.SPC -> W293MA.SPC
[sigmove 16:18:54 DEBUG] transformed W293Mb.SPC -> W293MB.SPC
[sigmove 16:18:54 DEBUG] transformed W293Mc.SPC -> W293MC.SPC
[sigmove 16:18:54 DEBUG] transformed W293Md.SPC -> W293MD.SPC
[sigmove 16:18:54 DEBUG] transformed W293Me.SPC -> W293ME.SPC
[sigmove 16:18:54 DEBUG] transformed W293Mf.SPC -> W293MF.SPC
[Status 16:18:54 INFO] data for W293 transferred to science data processing
[Tidy 16:18:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:18:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:18:54 INFO] resetting WatchDogTimer
[Status 16:18:54 INFO] Starting Set [AERI set: name X293, 6 scans, 0 angle, D16300 command]
[Ingest 16:18:54 INFO] Sending XML status message
[Status 16:18:54 INFO] Mirror angle: 0
[Mirror 16:18:55 INFO] rotating to position X
[Status 16:18:55 INFO] .SET file for ACQ96 ready
[Ingest 16:18:55 INFO] Starting acquisition
[Status 16:18:56 INFO] reading housekeeping
[Status 16:19:13 INFO] acquire complete
[Status 16:19:14 INFO] writing housekeeping
[Sequencer 16:19:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:19:14 INFO] incremented X scene to 293 completed views
[Sequencer 16:19:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:19:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:19:14 INFO] incremented to [AERI set: name Y293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:19:14 INFO] X293.SIG(18)
[sigmove 16:19:14 DEBUG] transformed X293Ma.SPC -> X293MA.SPC
[sigmove 16:19:14 DEBUG] transformed X293Mb.SPC -> X293MB.SPC
[sigmove 16:19:14 DEBUG] transformed X293Mc.SPC -> X293MC.SPC
[sigmove 16:19:14 DEBUG] transformed X293Md.SPC -> X293MD.SPC
[sigmove 16:19:14 DEBUG] transformed X293Me.SPC -> X293ME.SPC
[sigmove 16:19:14 DEBUG] transformed X293Mf.SPC -> X293MF.SPC
[Status 16:19:14 INFO] data for X293 transferred to science data processing
[Tidy 16:19:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:19:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:19:14 INFO] resetting WatchDogTimer
[Status 16:19:14 INFO] Starting Set [AERI set: name Y293, 6 scans, 0 angle, D16300 command]
[Ingest 16:19:14 INFO] Sending XML status message
[Status 16:19:14 INFO] Mirror angle: 0
[Mirror 16:19:15 INFO] rotating to position Y
[Status 16:19:15 INFO] .SET file for ACQ96 ready
[Ingest 16:19:16 INFO] Starting acquisition
[Status 16:19:16 INFO] reading housekeeping
[Status 16:19:33 INFO] acquire complete
[Status 16:19:34 INFO] writing housekeeping
[Sequencer 16:19:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:19:34 INFO] incremented Y scene to 293 completed views
[Sequencer 16:19:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:19:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:19:34 INFO] incremented to [AERI set: name Z293, 6 scans, 0 angle, D16300 command] set
[sigmove 16:19:34 INFO] Y293.SIG(18)
[sigmove 16:19:34 DEBUG] transformed Y293Ma.SPC -> Y293MA.SPC
[sigmove 16:19:34 DEBUG] transformed Y293Mb.SPC -> Y293MB.SPC
[sigmove 16:19:34 DEBUG] transformed Y293Mc.SPC -> Y293MC.SPC
[sigmove 16:19:34 DEBUG] transformed Y293Md.SPC -> Y293MD.SPC
[sigmove 16:19:34 DEBUG] transformed Y293Me.SPC -> Y293ME.SPC
[sigmove 16:19:34 DEBUG] transformed Y293Mf.SPC -> Y293MF.SPC
[Status 16:19:34 INFO] data for Y293 transferred to science data processing
[Tidy 16:19:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:19:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:19:34 INFO] resetting WatchDogTimer
[Status 16:19:35 INFO] Starting Set [AERI set: name Z293, 6 scans, 0 angle, D16300 command]
[Ingest 16:19:35 INFO] Sending XML status message
[Status 16:19:35 INFO] Mirror angle: 0
[Mirror 16:19:35 INFO] rotating to position Z
[Status 16:19:35 INFO] .SET file for ACQ96 ready
[Ingest 16:19:36 INFO] Starting acquisition
[Status 16:19:36 INFO] reading housekeeping
[Status 16:19:53 INFO] acquire complete
[Status 16:19:54 INFO] writing housekeeping
[Sequencer 16:19:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:19:54 INFO] incremented Z scene to 293 completed views
[Sequencer 16:19:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:19:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:19:54 INFO] incremented to [AERI set: name A294, 6 scans, 120 angle, D28300 command] set
[sigmove 16:19:54 INFO] Z293.SIG(18)
[sigmove 16:19:54 DEBUG] transformed Z293Ma.SPC -> Z293MA.SPC
[sigmove 16:19:54 DEBUG] transformed Z293Mb.SPC -> Z293MB.SPC
[sigmove 16:19:54 DEBUG] transformed Z293Mc.SPC -> Z293MC.SPC
[sigmove 16:19:54 DEBUG] transformed Z293Md.SPC -> Z293MD.SPC
[sigmove 16:19:54 DEBUG] transformed Z293Me.SPC -> Z293ME.SPC
[sigmove 16:19:54 DEBUG] transformed Z293Mf.SPC -> Z293MF.SPC
[Status 16:19:54 INFO] data for Z293 transferred to science data processing
[Tidy 16:19:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:19:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:19:54 INFO] resetting WatchDogTimer
[Status 16:19:55 INFO] Starting Set [AERI set: name A294, 6 scans, 120 angle, D28300 command]
[Ingest 16:19:55 INFO] Sending XML status message
[Status 16:19:55 INFO] Mirror angle: 120
[Mirror 16:19:55 INFO] rotating to position A
[Status 16:19:57 INFO] .SET file for ACQ96 ready
[Ingest 16:19:57 INFO] Starting acquisition
[Status 16:19:57 INFO] reading housekeeping
[Status 16:20:15 INFO] acquire complete
[Status 16:20:16 INFO] writing housekeeping
[Sequencer 16:20:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:20:16 INFO] incremented A scene to 294 completed views
[Sequencer 16:20:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:20:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:20:16 INFO] incremented to [AERI set: name H294, 6 scans, 60 angle, D22500 command] set
[sigmove 16:20:16 INFO] A294.SIG(18)
[sigmove 16:20:16 DEBUG] transformed A294Ma.SPC -> A294MA.SPC
[sigmove 16:20:16 DEBUG] transformed A294Mb.SPC -> A294MB.SPC
[sigmove 16:20:16 DEBUG] transformed A294Mc.SPC -> A294MC.SPC
[sigmove 16:20:16 DEBUG] transformed A294Md.SPC -> A294MD.SPC
[sigmove 16:20:16 DEBUG] transformed A294Me.SPC -> A294ME.SPC
[sigmove 16:20:16 DEBUG] transformed A294Mf.SPC -> A294MF.SPC
[Status 16:20:16 INFO] data for A294 transferred to science data processing
[Tidy 16:20:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:20:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:20:16 INFO] resetting WatchDogTimer
[Status 16:20:16 INFO] Starting Set [AERI set: name H294, 6 scans, 60 angle, D22500 command]
[Ingest 16:20:16 INFO] Sending XML status message
[Status 16:20:16 INFO] Mirror angle: 60
[Mirror 16:20:16 INFO] rotating to position H
[Status 16:20:17 INFO] .SET file for ACQ96 ready
[Ingest 16:20:18 INFO] Starting acquisition
[Status 16:20:18 INFO] reading housekeeping
[Status 16:20:36 INFO] acquire complete
[Status 16:20:37 INFO] writing housekeeping
[Sequencer 16:20:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:20:37 INFO] incremented H scene to 294 completed views
[Sequencer 16:20:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:20:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:20:37 INFO] incremented to [AERI set: name S294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:20:37 INFO] H294.SIG(18)
[sigmove 16:20:37 DEBUG] transformed H294Ma.SPC -> H294MA.SPC
[sigmove 16:20:37 DEBUG] transformed H294Mb.SPC -> H294MB.SPC
[sigmove 16:20:37 DEBUG] transformed H294Mc.SPC -> H294MC.SPC
[sigmove 16:20:37 DEBUG] transformed H294Md.SPC -> H294MD.SPC
[sigmove 16:20:37 DEBUG] transformed H294Me.SPC -> H294ME.SPC
[sigmove 16:20:37 DEBUG] transformed H294Mf.SPC -> H294MF.SPC
[Status 16:20:37 INFO] data for H294 transferred to science data processing
[Tidy 16:20:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:20:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:20:37 INFO] resetting WatchDogTimer
[Status 16:20:37 INFO] Starting Set [AERI set: name S294, 6 scans, 0 angle, D16300 command]
[Ingest 16:20:37 INFO] Sending XML status message
[Status 16:20:37 INFO] Mirror angle: 0
[Mirror 16:20:38 INFO] rotating to position S
[Status 16:20:39 INFO] .SET file for ACQ96 ready
[Ingest 16:20:39 INFO] Starting acquisition
[Status 16:20:40 INFO] reading housekeeping
[Status 16:20:57 INFO] acquire complete
[Status 16:20:59 INFO] writing housekeeping
[Sequencer 16:20:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:20:59 INFO] incremented S scene to 294 completed views
[Sequencer 16:20:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:20:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:20:59 INFO] incremented to [AERI set: name T294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:20:59 INFO] S294.SIG(18)
[sigmove 16:20:59 DEBUG] transformed S294Ma.SPC -> S294MA.SPC
[sigmove 16:20:59 DEBUG] transformed S294Mb.SPC -> S294MB.SPC
[sigmove 16:20:59 DEBUG] transformed S294Mc.SPC -> S294MC.SPC
[sigmove 16:20:59 DEBUG] transformed S294Md.SPC -> S294MD.SPC
[sigmove 16:20:59 DEBUG] transformed S294Me.SPC -> S294ME.SPC
[sigmove 16:20:59 DEBUG] transformed S294Mf.SPC -> S294MF.SPC
[Status 16:20:59 INFO] data for S294 transferred to science data processing
[Tidy 16:20:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:20:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:20:59 INFO] resetting WatchDogTimer
[Status 16:20:59 INFO] Starting Set [AERI set: name T294, 6 scans, 0 angle, D16300 command]
[Ingest 16:20:59 INFO] Sending XML status message
[Status 16:20:59 INFO] Mirror angle: 0
[Mirror 16:20:59 INFO] rotating to position T
[Status 16:21:00 INFO] .SET file for ACQ96 ready
[Ingest 16:21:00 INFO] Starting acquisition
[Status 16:21:00 INFO] reading housekeeping
[Status 16:21:19 INFO] acquire complete
[Status 16:21:20 INFO] writing housekeeping
[Sequencer 16:21:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:21:20 INFO] incremented T scene to 294 completed views
[Sequencer 16:21:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:21:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:21:20 INFO] incremented to [AERI set: name U294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:21:20 INFO] T294.SIG(18)
[sigmove 16:21:20 DEBUG] transformed T294Ma.SPC -> T294MA.SPC
[sigmove 16:21:20 DEBUG] transformed T294Mb.SPC -> T294MB.SPC
[sigmove 16:21:20 DEBUG] transformed T294Mc.SPC -> T294MC.SPC
[sigmove 16:21:20 DEBUG] transformed T294Md.SPC -> T294MD.SPC
[sigmove 16:21:20 DEBUG] transformed T294Me.SPC -> T294ME.SPC
[sigmove 16:21:20 DEBUG] transformed T294Mf.SPC -> T294MF.SPC
[Status 16:21:20 INFO] data for T294 transferred to science data processing
[Tidy 16:21:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:21:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:21:20 INFO] resetting WatchDogTimer
[Status 16:21:20 INFO] Starting Set [AERI set: name U294, 6 scans, 0 angle, D16300 command]
[Ingest 16:21:20 INFO] Sending XML status message
[Status 16:21:20 INFO] Mirror angle: 0
[Mirror 16:21:21 INFO] rotating to position U
[Status 16:21:21 INFO] .SET file for ACQ96 ready
[Ingest 16:21:22 INFO] Starting acquisition
[Status 16:21:22 INFO] reading housekeeping
[Status 16:21:40 INFO] acquire complete
[Status 16:21:41 INFO] writing housekeeping
[Sequencer 16:21:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:21:41 INFO] incremented U scene to 294 completed views
[Sequencer 16:21:41 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:21:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:21:41 INFO] incremented to [AERI set: name V294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:21:41 INFO] U294.SIG(18)
[sigmove 16:21:41 DEBUG] transformed U294Ma.SPC -> U294MA.SPC
[sigmove 16:21:41 DEBUG] transformed U294Mb.SPC -> U294MB.SPC
[sigmove 16:21:41 DEBUG] transformed U294Mc.SPC -> U294MC.SPC
[sigmove 16:21:41 DEBUG] transformed U294Md.SPC -> U294MD.SPC
[sigmove 16:21:41 DEBUG] transformed U294Me.SPC -> U294ME.SPC
[sigmove 16:21:41 DEBUG] transformed U294Mf.SPC -> U294MF.SPC
[Status 16:21:41 INFO] data for U294 transferred to science data processing
[Tidy 16:21:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:21:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:21:41 INFO] resetting WatchDogTimer
[Status 16:21:41 INFO] Starting Set [AERI set: name V294, 6 scans, 0 angle, D16300 command]
[Ingest 16:21:41 INFO] Sending XML status message
[Status 16:21:41 INFO] Mirror angle: 0
[Mirror 16:21:42 INFO] rotating to position V
[Status 16:21:42 INFO] .SET file for ACQ96 ready
[Ingest 16:21:43 INFO] Starting acquisition
[Status 16:21:43 INFO] reading housekeeping
[Status 16:22:00 INFO] acquire complete
[Status 16:22:01 INFO] writing housekeeping
[Sequencer 16:22:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:22:01 INFO] incremented V scene to 294 completed views
[Sequencer 16:22:01 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:22:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:22:01 INFO] incremented to [AERI set: name W294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:22:01 INFO] V294.SIG(18)
[sigmove 16:22:01 DEBUG] transformed V294Ma.SPC -> V294MA.SPC
[sigmove 16:22:01 DEBUG] transformed V294Mb.SPC -> V294MB.SPC
[sigmove 16:22:01 DEBUG] transformed V294Mc.SPC -> V294MC.SPC
[sigmove 16:22:01 DEBUG] transformed V294Md.SPC -> V294MD.SPC
[sigmove 16:22:01 DEBUG] transformed V294Me.SPC -> V294ME.SPC
[sigmove 16:22:01 DEBUG] transformed V294Mf.SPC -> V294MF.SPC
[Status 16:22:01 INFO] data for V294 transferred to science data processing
[Tidy 16:22:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:22:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:22:01 INFO] resetting WatchDogTimer
[Status 16:22:02 INFO] Starting Set [AERI set: name W294, 6 scans, 0 angle, D16300 command]
[Ingest 16:22:02 INFO] Sending XML status message
[Status 16:22:02 INFO] Mirror angle: 0
[Mirror 16:22:02 INFO] rotating to position W
[Status 16:22:02 INFO] .SET file for ACQ96 ready
[Ingest 16:22:03 INFO] Starting acquisition
[Status 16:22:03 INFO] reading housekeeping
[Status 16:22:20 INFO] acquire complete
[Status 16:22:21 INFO] writing housekeeping
[Sequencer 16:22:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:22:21 INFO] incremented W scene to 294 completed views
[Sequencer 16:22:21 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:22:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:22:21 INFO] incremented to [AERI set: name X294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:22:21 INFO] W294.SIG(18)
[sigmove 16:22:21 DEBUG] transformed W294Ma.SPC -> W294MA.SPC
[sigmove 16:22:21 DEBUG] transformed W294Mb.SPC -> W294MB.SPC
[sigmove 16:22:21 DEBUG] transformed W294Mc.SPC -> W294MC.SPC
[sigmove 16:22:21 DEBUG] transformed W294Md.SPC -> W294MD.SPC
[sigmove 16:22:21 DEBUG] transformed W294Me.SPC -> W294ME.SPC
[sigmove 16:22:21 DEBUG] transformed W294Mf.SPC -> W294MF.SPC
[Status 16:22:21 INFO] data for W294 transferred to science data processing
[Tidy 16:22:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:22:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:22:21 INFO] resetting WatchDogTimer
[Status 16:22:22 INFO] Starting Set [AERI set: name X294, 6 scans, 0 angle, D16300 command]
[Ingest 16:22:22 INFO] Sending XML status message
[Status 16:22:22 INFO] Mirror angle: 0
[Mirror 16:22:22 INFO] rotating to position X
[Status 16:22:23 INFO] .SET file for ACQ96 ready
[Ingest 16:22:23 INFO] Starting acquisition
[Status 16:22:23 INFO] reading housekeeping
[Status 16:22:41 INFO] acquire complete
[Status 16:22:42 INFO] writing housekeeping
[Sequencer 16:22:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:22:42 INFO] incremented X scene to 294 completed views
[Sequencer 16:22:42 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:22:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:22:42 INFO] incremented to [AERI set: name Y294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:22:42 INFO] X294.SIG(18)
[sigmove 16:22:42 DEBUG] transformed X294Ma.SPC -> X294MA.SPC
[sigmove 16:22:42 DEBUG] transformed X294Mb.SPC -> X294MB.SPC
[sigmove 16:22:42 DEBUG] transformed X294Mc.SPC -> X294MC.SPC
[sigmove 16:22:42 DEBUG] transformed X294Md.SPC -> X294MD.SPC
[sigmove 16:22:42 DEBUG] transformed X294Me.SPC -> X294ME.SPC
[sigmove 16:22:42 DEBUG] transformed X294Mf.SPC -> X294MF.SPC
[Status 16:22:42 INFO] data for X294 transferred to science data processing
[Tidy 16:22:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:22:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:22:42 INFO] resetting WatchDogTimer
[Status 16:22:42 INFO] Starting Set [AERI set: name Y294, 6 scans, 0 angle, D16300 command]
[Ingest 16:22:42 INFO] Sending XML status message
[Status 16:22:42 INFO] Mirror angle: 0
[Mirror 16:22:42 INFO] rotating to position Y
[Status 16:22:43 INFO] .SET file for ACQ96 ready
[Ingest 16:22:43 INFO] Starting acquisition
[Status 16:22:44 INFO] reading housekeeping
[Status 16:23:01 INFO] acquire complete
[Status 16:23:02 INFO] writing housekeeping
[Sequencer 16:23:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:23:02 INFO] incremented Y scene to 294 completed views
[Sequencer 16:23:02 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:23:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:23:02 INFO] incremented to [AERI set: name Z294, 6 scans, 0 angle, D16300 command] set
[sigmove 16:23:02 INFO] Y294.SIG(18)
[sigmove 16:23:02 DEBUG] transformed Y294Ma.SPC -> Y294MA.SPC
[sigmove 16:23:02 DEBUG] transformed Y294Mb.SPC -> Y294MB.SPC
[sigmove 16:23:02 DEBUG] transformed Y294Mc.SPC -> Y294MC.SPC
[sigmove 16:23:02 DEBUG] transformed Y294Md.SPC -> Y294MD.SPC
[sigmove 16:23:02 DEBUG] transformed Y294Me.SPC -> Y294ME.SPC
[sigmove 16:23:02 DEBUG] transformed Y294Mf.SPC -> Y294MF.SPC
[Status 16:23:02 INFO] data for Y294 transferred to science data processing
[Tidy 16:23:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:23:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:23:02 INFO] resetting WatchDogTimer
[Status 16:23:02 INFO] Starting Set [AERI set: name Z294, 6 scans, 0 angle, D16300 command]
[Ingest 16:23:02 INFO] Sending XML status message
[Status 16:23:02 INFO] Mirror angle: 0
[Mirror 16:23:03 INFO] rotating to position Z
[Status 16:23:03 INFO] .SET file for ACQ96 ready
[Ingest 16:23:03 INFO] Starting acquisition
[Status 16:23:04 INFO] reading housekeeping
[Status 16:23:21 INFO] acquire complete
[Status 16:23:22 INFO] writing housekeeping
[Sequencer 16:23:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:23:22 INFO] incremented Z scene to 294 completed views
[Sequencer 16:23:22 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:23:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:23:22 INFO] incremented to [AERI set: name H295, 6 scans, 60 angle, D22500 command] set
[sigmove 16:23:22 INFO] Z294.SIG(18)
[sigmove 16:23:22 DEBUG] transformed Z294Ma.SPC -> Z294MA.SPC
[sigmove 16:23:22 DEBUG] transformed Z294Mb.SPC -> Z294MB.SPC
[sigmove 16:23:22 DEBUG] transformed Z294Mc.SPC -> Z294MC.SPC
[sigmove 16:23:22 DEBUG] transformed Z294Md.SPC -> Z294MD.SPC
[sigmove 16:23:22 DEBUG] transformed Z294Me.SPC -> Z294ME.SPC
[sigmove 16:23:22 DEBUG] transformed Z294Mf.SPC -> Z294MF.SPC
[Status 16:23:22 INFO] data for Z294 transferred to science data processing
[Tidy 16:23:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:23:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:23:22 INFO] resetting WatchDogTimer
[Status 16:23:22 INFO] Starting Set [AERI set: name H295, 6 scans, 60 angle, D22500 command]
[Ingest 16:23:22 INFO] Sending XML status message
[Status 16:23:22 INFO] Mirror angle: 60
[Mirror 16:23:23 INFO] rotating to position H
[Status 16:23:24 INFO] .SET file for ACQ96 ready
[Ingest 16:23:24 INFO] Starting acquisition
[Status 16:23:25 INFO] reading housekeeping
[Status 16:23:42 INFO] acquire complete
[Status 16:23:43 INFO] writing housekeeping
[Sequencer 16:23:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:23:43 INFO] incremented H scene to 295 completed views
[Sequencer 16:23:43 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:23:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:23:43 INFO] incremented to [AERI set: name A295, 6 scans, 120 angle, D28300 command] set
[sigmove 16:23:43 INFO] H295.SIG(18)
[sigmove 16:23:43 DEBUG] transformed H295Ma.SPC -> H295MA.SPC
[sigmove 16:23:43 DEBUG] transformed H295Mb.SPC -> H295MB.SPC
[sigmove 16:23:43 DEBUG] transformed H295Mc.SPC -> H295MC.SPC
[sigmove 16:23:43 DEBUG] transformed H295Md.SPC -> H295MD.SPC
[sigmove 16:23:43 DEBUG] transformed H295Me.SPC -> H295ME.SPC
[sigmove 16:23:43 DEBUG] transformed H295Mf.SPC -> H295MF.SPC
[Status 16:23:43 INFO] data for H295 transferred to science data processing
[Tidy 16:23:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:23:43 INFO] A293.FIN(19),H293.FIN(19),S293.FIN(19),T293.FIN(19),U293.FIN(19),V293.FIN(19),W293.FIN(19),X293.FIN(19),Y293.FIN(19),Z293.FIN(19),A294.FIN(19),H294.FIN(19),S294.FIN(19),T294.FIN(19),U294.FIN(19),V294.FIN(19),W294.FIN(19),X294.FIN(19),Y294.FIN(19),Z294.FIN(19)
[sigmove 16:23:43 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:23:43 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:23:49 DEBUG] done zipping
[WatchDog 16:23:49 INFO] resetting WatchDogTimer
[Status 16:23:49 INFO] Starting Set [AERI set: name A295, 6 scans, 120 angle, D28300 command]
[Ingest 16:23:49 INFO] Sending XML status message
[Status 16:23:49 INFO] Mirror angle: 120
[Mirror 16:23:50 INFO] rotating to position A
[Status 16:23:51 INFO] .SET file for ACQ96 ready
[Ingest 16:23:51 INFO] Starting acquisition
[Status 16:23:51 INFO] reading housekeeping
[Status 16:24:09 INFO] acquire complete
[Status 16:24:10 INFO] writing housekeeping
[Sequencer 16:24:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:24:10 INFO] incremented A scene to 295 completed views
[Sequencer 16:24:10 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:24:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:24:10 INFO] incremented to [AERI set: name S295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:24:10 INFO] A295.SIG(18)
[sigmove 16:24:10 DEBUG] transformed A295Ma.SPC -> A295MA.SPC
[sigmove 16:24:10 DEBUG] transformed A295Mb.SPC -> A295MB.SPC
[sigmove 16:24:10 DEBUG] transformed A295Mc.SPC -> A295MC.SPC
[sigmove 16:24:10 DEBUG] transformed A295Md.SPC -> A295MD.SPC
[sigmove 16:24:10 DEBUG] transformed A295Me.SPC -> A295ME.SPC
[sigmove 16:24:10 DEBUG] transformed A295Mf.SPC -> A295MF.SPC
[Status 16:24:10 INFO] data for A295 transferred to science data processing
[Tidy 16:24:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:24:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:24:10 INFO] resetting WatchDogTimer
[Status 16:24:11 INFO] Starting Set [AERI set: name S295, 6 scans, 0 angle, D16300 command]
[Ingest 16:24:11 INFO] Sending XML status message
[Status 16:24:11 INFO] Mirror angle: 0
[Mirror 16:24:11 INFO] rotating to position S
[Status 16:24:13 INFO] .SET file for ACQ96 ready
[Ingest 16:24:13 INFO] Starting acquisition
[Status 16:24:13 INFO] reading housekeeping
[Status 16:24:31 INFO] acquire complete
[Status 16:24:32 INFO] writing housekeeping
[Sequencer 16:24:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:24:32 INFO] incremented S scene to 295 completed views
[Sequencer 16:24:32 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:24:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:24:32 INFO] incremented to [AERI set: name T295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:24:32 INFO] S295.SIG(18)
[sigmove 16:24:32 DEBUG] transformed S295Ma.SPC -> S295MA.SPC
[sigmove 16:24:32 DEBUG] transformed S295Mb.SPC -> S295MB.SPC
[sigmove 16:24:32 DEBUG] transformed S295Mc.SPC -> S295MC.SPC
[sigmove 16:24:32 DEBUG] transformed S295Md.SPC -> S295MD.SPC
[sigmove 16:24:32 DEBUG] transformed S295Me.SPC -> S295ME.SPC
[sigmove 16:24:32 DEBUG] transformed S295Mf.SPC -> S295MF.SPC
[Status 16:24:32 INFO] data for S295 transferred to science data processing
[Tidy 16:24:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:24:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:24:32 INFO] resetting WatchDogTimer
[Status 16:24:32 INFO] Starting Set [AERI set: name T295, 6 scans, 0 angle, D16300 command]
[Ingest 16:24:32 INFO] Sending XML status message
[Status 16:24:32 INFO] Mirror angle: 0
[Mirror 16:24:32 INFO] rotating to position T
[Status 16:24:33 INFO] .SET file for ACQ96 ready
[Ingest 16:24:33 INFO] Starting acquisition
[Status 16:24:34 INFO] reading housekeeping
[Status 16:24:51 INFO] acquire complete
[Status 16:24:52 INFO] writing housekeeping
[Sequencer 16:24:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:24:52 INFO] incremented T scene to 295 completed views
[Sequencer 16:24:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:24:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:24:52 INFO] incremented to [AERI set: name U295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:24:52 INFO] T295.SIG(18)
[sigmove 16:24:52 DEBUG] transformed T295Ma.SPC -> T295MA.SPC
[sigmove 16:24:52 DEBUG] transformed T295Mb.SPC -> T295MB.SPC
[sigmove 16:24:52 DEBUG] transformed T295Mc.SPC -> T295MC.SPC
[sigmove 16:24:52 DEBUG] transformed T295Md.SPC -> T295MD.SPC
[sigmove 16:24:52 DEBUG] transformed T295Me.SPC -> T295ME.SPC
[sigmove 16:24:52 DEBUG] transformed T295Mf.SPC -> T295MF.SPC
[Status 16:24:52 INFO] data for T295 transferred to science data processing
[Tidy 16:24:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:24:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:24:52 INFO] resetting WatchDogTimer
[Status 16:24:53 INFO] Starting Set [AERI set: name U295, 6 scans, 0 angle, D16300 command]
[Ingest 16:24:53 INFO] Sending XML status message
[Status 16:24:53 INFO] Mirror angle: 0
[Mirror 16:24:53 INFO] rotating to position U
[Status 16:24:54 INFO] .SET file for ACQ96 ready
[Ingest 16:24:54 INFO] Starting acquisition
[Status 16:24:55 INFO] reading housekeeping
[Status 16:25:12 INFO] acquire complete
[Status 16:25:13 INFO] writing housekeeping
[Sequencer 16:25:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:25:13 INFO] incremented U scene to 295 completed views
[Sequencer 16:25:13 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:25:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:25:13 INFO] incremented to [AERI set: name V295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:25:13 INFO] U295.SIG(18)
[sigmove 16:25:13 DEBUG] transformed U295Ma.SPC -> U295MA.SPC
[sigmove 16:25:13 DEBUG] transformed U295Mb.SPC -> U295MB.SPC
[sigmove 16:25:13 DEBUG] transformed U295Mc.SPC -> U295MC.SPC
[sigmove 16:25:13 DEBUG] transformed U295Md.SPC -> U295MD.SPC
[sigmove 16:25:13 DEBUG] transformed U295Me.SPC -> U295ME.SPC
[sigmove 16:25:13 DEBUG] transformed U295Mf.SPC -> U295MF.SPC
[Status 16:25:13 INFO] data for U295 transferred to science data processing
[Tidy 16:25:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:25:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:25:13 INFO] resetting WatchDogTimer
[Status 16:25:14 INFO] Starting Set [AERI set: name V295, 6 scans, 0 angle, D16300 command]
[Ingest 16:25:14 INFO] Sending XML status message
[Status 16:25:14 INFO] Mirror angle: 0
[Mirror 16:25:14 INFO] rotating to position V
[Status 16:25:14 INFO] .SET file for ACQ96 ready
[Ingest 16:25:15 INFO] Starting acquisition
[Status 16:25:15 INFO] reading housekeeping
[Status 16:25:32 INFO] acquire complete
[Status 16:25:33 INFO] writing housekeeping
[Sequencer 16:25:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:25:33 INFO] incremented V scene to 295 completed views
[Sequencer 16:25:33 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:25:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:25:33 INFO] incremented to [AERI set: name W295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:25:33 INFO] V295.SIG(18)
[sigmove 16:25:33 DEBUG] transformed V295Ma.SPC -> V295MA.SPC
[sigmove 16:25:33 DEBUG] transformed V295Mb.SPC -> V295MB.SPC
[sigmove 16:25:33 DEBUG] transformed V295Mc.SPC -> V295MC.SPC
[sigmove 16:25:33 DEBUG] transformed V295Md.SPC -> V295MD.SPC
[sigmove 16:25:33 DEBUG] transformed V295Me.SPC -> V295ME.SPC
[sigmove 16:25:33 DEBUG] transformed V295Mf.SPC -> V295MF.SPC
[Status 16:25:33 INFO] data for V295 transferred to science data processing
[Tidy 16:25:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:25:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:25:33 INFO] resetting WatchDogTimer
[Status 16:25:34 INFO] Starting Set [AERI set: name W295, 6 scans, 0 angle, D16300 command]
[Ingest 16:25:34 INFO] Sending XML status message
[Status 16:25:34 INFO] Mirror angle: 0
[Mirror 16:25:34 INFO] rotating to position W
[Status 16:25:35 INFO] .SET file for ACQ96 ready
[Ingest 16:25:35 INFO] Starting acquisition
[Status 16:25:35 INFO] reading housekeeping
[Status 16:25:53 INFO] acquire complete
[Status 16:25:54 INFO] writing housekeeping
[Sequencer 16:25:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:25:54 INFO] incremented W scene to 295 completed views
[Sequencer 16:25:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:25:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:25:54 INFO] incremented to [AERI set: name X295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:25:54 INFO] W295.SIG(18)
[sigmove 16:25:54 DEBUG] transformed W295Ma.SPC -> W295MA.SPC
[sigmove 16:25:54 DEBUG] transformed W295Mb.SPC -> W295MB.SPC
[sigmove 16:25:54 DEBUG] transformed W295Mc.SPC -> W295MC.SPC
[sigmove 16:25:54 DEBUG] transformed W295Md.SPC -> W295MD.SPC
[sigmove 16:25:54 DEBUG] transformed W295Me.SPC -> W295ME.SPC
[sigmove 16:25:54 DEBUG] transformed W295Mf.SPC -> W295MF.SPC
[Status 16:25:54 INFO] data for W295 transferred to science data processing
[Tidy 16:25:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:25:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:25:54 INFO] resetting WatchDogTimer
[Status 16:25:54 INFO] Starting Set [AERI set: name X295, 6 scans, 0 angle, D16300 command]
[Ingest 16:25:54 INFO] Sending XML status message
[Status 16:25:54 INFO] Mirror angle: 0
[Mirror 16:25:54 INFO] rotating to position X
[Status 16:25:55 INFO] .SET file for ACQ96 ready
[Ingest 16:25:55 INFO] Starting acquisition
[Status 16:25:56 INFO] reading housekeeping
[Status 16:26:13 INFO] acquire complete
[Status 16:26:14 INFO] writing housekeeping
[Sequencer 16:26:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:26:14 INFO] incremented X scene to 295 completed views
[Sequencer 16:26:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:26:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:26:14 INFO] incremented to [AERI set: name Y295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:26:14 INFO] X295.SIG(18)
[sigmove 16:26:14 DEBUG] transformed X295Ma.SPC -> X295MA.SPC
[sigmove 16:26:14 DEBUG] transformed X295Mb.SPC -> X295MB.SPC
[sigmove 16:26:14 DEBUG] transformed X295Mc.SPC -> X295MC.SPC
[sigmove 16:26:14 DEBUG] transformed X295Md.SPC -> X295MD.SPC
[sigmove 16:26:14 DEBUG] transformed X295Me.SPC -> X295ME.SPC
[sigmove 16:26:14 DEBUG] transformed X295Mf.SPC -> X295MF.SPC
[Status 16:26:14 INFO] data for X295 transferred to science data processing
[Tidy 16:26:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:26:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:26:14 INFO] resetting WatchDogTimer
[Status 16:26:14 INFO] Starting Set [AERI set: name Y295, 6 scans, 0 angle, D16300 command]
[Ingest 16:26:14 INFO] Sending XML status message
[Status 16:26:14 INFO] Mirror angle: 0
[Mirror 16:26:15 INFO] rotating to position Y
[Status 16:26:15 INFO] .SET file for ACQ96 ready
[Ingest 16:26:15 INFO] Starting acquisition
[Status 16:26:16 INFO] reading housekeeping
[Status 16:26:33 INFO] acquire complete
[Status 16:26:34 INFO] writing housekeeping
[Sequencer 16:26:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:26:34 INFO] incremented Y scene to 295 completed views
[Sequencer 16:26:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:26:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:26:34 INFO] incremented to [AERI set: name Z295, 6 scans, 0 angle, D16300 command] set
[sigmove 16:26:34 INFO] Y295.SIG(18)
[sigmove 16:26:34 DEBUG] transformed Y295Ma.SPC -> Y295MA.SPC
[sigmove 16:26:34 DEBUG] transformed Y295Mb.SPC -> Y295MB.SPC
[sigmove 16:26:34 DEBUG] transformed Y295Mc.SPC -> Y295MC.SPC
[sigmove 16:26:34 DEBUG] transformed Y295Md.SPC -> Y295MD.SPC
[sigmove 16:26:34 DEBUG] transformed Y295Me.SPC -> Y295ME.SPC
[sigmove 16:26:34 DEBUG] transformed Y295Mf.SPC -> Y295MF.SPC
[Status 16:26:34 INFO] data for Y295 transferred to science data processing
[Tidy 16:26:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:26:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:26:34 INFO] resetting WatchDogTimer
[Status 16:26:34 INFO] Starting Set [AERI set: name Z295, 6 scans, 0 angle, D16300 command]
[Ingest 16:26:34 INFO] Sending XML status message
[Status 16:26:34 INFO] Mirror angle: 0
[Mirror 16:26:35 INFO] rotating to position Z
[Status 16:26:35 INFO] .SET file for ACQ96 ready
[Ingest 16:26:36 INFO] Starting acquisition
[Status 16:26:36 INFO] reading housekeeping
[Status 16:26:53 INFO] acquire complete
[Status 16:26:54 INFO] writing housekeeping
[Sequencer 16:26:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:26:54 INFO] incremented Z scene to 295 completed views
[Sequencer 16:26:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:26:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:26:54 INFO] incremented to [AERI set: name A296, 6 scans, 120 angle, D28300 command] set
[sigmove 16:26:54 INFO] Z295.SIG(18)
[sigmove 16:26:54 DEBUG] transformed Z295Ma.SPC -> Z295MA.SPC
[sigmove 16:26:54 DEBUG] transformed Z295Mb.SPC -> Z295MB.SPC
[sigmove 16:26:54 DEBUG] transformed Z295Mc.SPC -> Z295MC.SPC
[sigmove 16:26:54 DEBUG] transformed Z295Md.SPC -> Z295MD.SPC
[sigmove 16:26:54 DEBUG] transformed Z295Me.SPC -> Z295ME.SPC
[sigmove 16:26:54 DEBUG] transformed Z295Mf.SPC -> Z295MF.SPC
[Status 16:26:54 INFO] data for Z295 transferred to science data processing
[Tidy 16:26:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:26:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:26:54 INFO] resetting WatchDogTimer
[Status 16:26:55 INFO] Starting Set [AERI set: name A296, 6 scans, 120 angle, D28300 command]
[Ingest 16:26:55 INFO] Sending XML status message
[Status 16:26:55 INFO] Mirror angle: 120
[Mirror 16:26:55 INFO] rotating to position A
[Status 16:26:56 INFO] .SET file for ACQ96 ready
[Ingest 16:26:57 INFO] Starting acquisition
[Status 16:26:57 INFO] reading housekeeping
[Status 16:27:14 INFO] acquire complete
[Status 16:27:15 INFO] writing housekeeping
[Sequencer 16:27:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:27:15 INFO] incremented A scene to 296 completed views
[Sequencer 16:27:15 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:27:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:27:15 INFO] incremented to [AERI set: name H296, 6 scans, 60 angle, D22500 command] set
[sigmove 16:27:15 INFO] A296.SIG(18)
[sigmove 16:27:15 DEBUG] transformed A296Ma.SPC -> A296MA.SPC
[sigmove 16:27:15 DEBUG] transformed A296Mb.SPC -> A296MB.SPC
[sigmove 16:27:15 DEBUG] transformed A296Mc.SPC -> A296MC.SPC
[sigmove 16:27:15 DEBUG] transformed A296Md.SPC -> A296MD.SPC
[sigmove 16:27:15 DEBUG] transformed A296Me.SPC -> A296ME.SPC
[sigmove 16:27:15 DEBUG] transformed A296Mf.SPC -> A296MF.SPC
[Status 16:27:15 INFO] data for A296 transferred to science data processing
[Tidy 16:27:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:27:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:27:15 INFO] resetting WatchDogTimer
[Status 16:27:16 INFO] Starting Set [AERI set: name H296, 6 scans, 60 angle, D22500 command]
[Ingest 16:27:16 INFO] Sending XML status message
[Status 16:27:16 INFO] Mirror angle: 60
[Mirror 16:27:16 INFO] rotating to position H
[Status 16:27:17 INFO] .SET file for ACQ96 ready
[Ingest 16:27:18 INFO] Starting acquisition
[Status 16:27:18 INFO] reading housekeeping
[Status 16:27:36 INFO] acquire complete
[Status 16:27:37 INFO] writing housekeeping
[Sequencer 16:27:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:27:37 INFO] incremented H scene to 296 completed views
[Sequencer 16:27:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:27:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:27:37 INFO] incremented to [AERI set: name S296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:27:37 INFO] H296.SIG(18)
[sigmove 16:27:37 DEBUG] transformed H296Ma.SPC -> H296MA.SPC
[sigmove 16:27:37 DEBUG] transformed H296Mb.SPC -> H296MB.SPC
[sigmove 16:27:37 DEBUG] transformed H296Mc.SPC -> H296MC.SPC
[sigmove 16:27:37 DEBUG] transformed H296Md.SPC -> H296MD.SPC
[sigmove 16:27:37 DEBUG] transformed H296Me.SPC -> H296ME.SPC
[sigmove 16:27:37 DEBUG] transformed H296Mf.SPC -> H296MF.SPC
[Status 16:27:37 INFO] data for H296 transferred to science data processing
[Tidy 16:27:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:27:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:27:37 INFO] resetting WatchDogTimer
[Status 16:27:37 INFO] Starting Set [AERI set: name S296, 6 scans, 0 angle, D16300 command]
[Ingest 16:27:37 INFO] Sending XML status message
[Status 16:27:37 INFO] Mirror angle: 0
[Mirror 16:27:38 INFO] rotating to position S
[Status 16:27:39 INFO] .SET file for ACQ96 ready
[Ingest 16:27:39 INFO] Starting acquisition
[Status 16:27:39 INFO] reading housekeeping
[Status 16:27:57 INFO] acquire complete
[Status 16:27:58 INFO] writing housekeeping
[Sequencer 16:27:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:27:58 INFO] incremented S scene to 296 completed views
[Sequencer 16:27:58 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:27:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:27:58 INFO] incremented to [AERI set: name T296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:27:58 INFO] S296.SIG(18)
[sigmove 16:27:58 DEBUG] transformed S296Ma.SPC -> S296MA.SPC
[sigmove 16:27:58 DEBUG] transformed S296Mb.SPC -> S296MB.SPC
[sigmove 16:27:58 DEBUG] transformed S296Mc.SPC -> S296MC.SPC
[sigmove 16:27:58 DEBUG] transformed S296Md.SPC -> S296MD.SPC
[sigmove 16:27:58 DEBUG] transformed S296Me.SPC -> S296ME.SPC
[sigmove 16:27:58 DEBUG] transformed S296Mf.SPC -> S296MF.SPC
[Status 16:27:58 INFO] data for S296 transferred to science data processing
[Tidy 16:27:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:27:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:27:58 INFO] resetting WatchDogTimer
[Status 16:27:58 INFO] Starting Set [AERI set: name T296, 6 scans, 0 angle, D16300 command]
[Ingest 16:27:58 INFO] Sending XML status message
[Status 16:27:58 INFO] Mirror angle: 0
[Mirror 16:27:59 INFO] rotating to position T
[Status 16:27:59 INFO] .SET file for ACQ96 ready
[Ingest 16:28:00 INFO] Starting acquisition
[Status 16:28:00 INFO] reading housekeeping
[Status 16:28:17 INFO] acquire complete
[Status 16:28:18 INFO] writing housekeeping
[Sequencer 16:28:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:28:18 INFO] incremented T scene to 296 completed views
[Sequencer 16:28:18 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:28:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:28:18 INFO] incremented to [AERI set: name U296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:28:18 INFO] T296.SIG(18)
[sigmove 16:28:18 DEBUG] transformed T296Ma.SPC -> T296MA.SPC
[sigmove 16:28:18 DEBUG] transformed T296Mb.SPC -> T296MB.SPC
[sigmove 16:28:18 DEBUG] transformed T296Mc.SPC -> T296MC.SPC
[sigmove 16:28:18 DEBUG] transformed T296Md.SPC -> T296MD.SPC
[sigmove 16:28:18 DEBUG] transformed T296Me.SPC -> T296ME.SPC
[sigmove 16:28:18 DEBUG] transformed T296Mf.SPC -> T296MF.SPC
[Status 16:28:18 INFO] data for T296 transferred to science data processing
[Tidy 16:28:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:28:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:28:18 INFO] resetting WatchDogTimer
[Status 16:28:19 INFO] Starting Set [AERI set: name U296, 6 scans, 0 angle, D16300 command]
[Ingest 16:28:19 INFO] Sending XML status message
[Status 16:28:19 INFO] Mirror angle: 0
[Mirror 16:28:19 INFO] rotating to position U
[Status 16:28:20 INFO] .SET file for ACQ96 ready
[Ingest 16:28:20 INFO] Starting acquisition
[Status 16:28:20 INFO] reading housekeeping
[Status 16:28:39 INFO] acquire complete
[Status 16:28:40 INFO] writing housekeeping
[Sequencer 16:28:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:28:40 INFO] incremented U scene to 296 completed views
[Sequencer 16:28:40 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:28:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:28:40 INFO] incremented to [AERI set: name V296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:28:40 INFO] U296.SIG(18)
[sigmove 16:28:40 DEBUG] transformed U296Ma.SPC -> U296MA.SPC
[sigmove 16:28:40 DEBUG] transformed U296Mb.SPC -> U296MB.SPC
[sigmove 16:28:40 DEBUG] transformed U296Mc.SPC -> U296MC.SPC
[sigmove 16:28:40 DEBUG] transformed U296Md.SPC -> U296MD.SPC
[sigmove 16:28:40 DEBUG] transformed U296Me.SPC -> U296ME.SPC
[sigmove 16:28:40 DEBUG] transformed U296Mf.SPC -> U296MF.SPC
[Status 16:28:40 INFO] data for U296 transferred to science data processing
[Tidy 16:28:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:28:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:28:40 INFO] resetting WatchDogTimer
[Status 16:28:40 INFO] Starting Set [AERI set: name V296, 6 scans, 0 angle, D16300 command]
[Ingest 16:28:40 INFO] Sending XML status message
[Status 16:28:40 INFO] Mirror angle: 0
[Mirror 16:28:40 INFO] rotating to position V
[Status 16:28:41 INFO] .SET file for ACQ96 ready
[Ingest 16:28:41 INFO] Starting acquisition
[Status 16:28:42 INFO] reading housekeeping
[Status 16:28:59 INFO] acquire complete
[Status 16:29:00 INFO] writing housekeeping
[Sequencer 16:29:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:29:00 INFO] incremented V scene to 296 completed views
[Sequencer 16:29:00 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:29:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:29:00 INFO] incremented to [AERI set: name W296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:29:00 INFO] V296.SIG(18)
[sigmove 16:29:00 DEBUG] transformed V296Ma.SPC -> V296MA.SPC
[sigmove 16:29:00 DEBUG] transformed V296Mb.SPC -> V296MB.SPC
[sigmove 16:29:00 DEBUG] transformed V296Mc.SPC -> V296MC.SPC
[sigmove 16:29:00 DEBUG] transformed V296Md.SPC -> V296MD.SPC
[sigmove 16:29:00 DEBUG] transformed V296Me.SPC -> V296ME.SPC
[sigmove 16:29:00 DEBUG] transformed V296Mf.SPC -> V296MF.SPC
[Status 16:29:00 INFO] data for V296 transferred to science data processing
[Tidy 16:29:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:29:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:29:00 INFO] resetting WatchDogTimer
[Status 16:29:00 INFO] Starting Set [AERI set: name W296, 6 scans, 0 angle, D16300 command]
[Ingest 16:29:00 INFO] Sending XML status message
[Status 16:29:00 INFO] Mirror angle: 0
[Mirror 16:29:01 INFO] rotating to position W
[Status 16:29:01 INFO] .SET file for ACQ96 ready
[Ingest 16:29:01 INFO] Starting acquisition
[Status 16:29:02 INFO] reading housekeeping
[Status 16:29:19 INFO] acquire complete
[Status 16:29:20 INFO] writing housekeeping
[Sequencer 16:29:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:29:20 INFO] incremented W scene to 296 completed views
[Sequencer 16:29:20 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:29:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:29:20 INFO] incremented to [AERI set: name X296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:29:20 INFO] W296.SIG(18)
[sigmove 16:29:20 DEBUG] transformed W296Ma.SPC -> W296MA.SPC
[sigmove 16:29:20 DEBUG] transformed W296Mb.SPC -> W296MB.SPC
[sigmove 16:29:20 DEBUG] transformed W296Mc.SPC -> W296MC.SPC
[sigmove 16:29:20 DEBUG] transformed W296Md.SPC -> W296MD.SPC
[sigmove 16:29:20 DEBUG] transformed W296Me.SPC -> W296ME.SPC
[sigmove 16:29:20 DEBUG] transformed W296Mf.SPC -> W296MF.SPC
[Status 16:29:20 INFO] data for W296 transferred to science data processing
[Tidy 16:29:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:29:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:29:20 INFO] resetting WatchDogTimer
[Status 16:29:20 INFO] Starting Set [AERI set: name X296, 6 scans, 0 angle, D16300 command]
[Ingest 16:29:20 INFO] Sending XML status message
[Status 16:29:20 INFO] Mirror angle: 0
[Mirror 16:29:21 INFO] rotating to position X
[Status 16:29:21 INFO] .SET file for ACQ96 ready
[Ingest 16:29:22 INFO] Starting acquisition
[Status 16:29:22 INFO] reading housekeeping
[Status 16:29:40 INFO] acquire complete
[Status 16:29:41 INFO] writing housekeeping
[Sequencer 16:29:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:29:41 INFO] incremented X scene to 296 completed views
[Sequencer 16:29:41 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:29:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:29:41 INFO] incremented to [AERI set: name Y296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:29:41 INFO] X296.SIG(18)
[sigmove 16:29:41 DEBUG] transformed X296Ma.SPC -> X296MA.SPC
[sigmove 16:29:41 DEBUG] transformed X296Mb.SPC -> X296MB.SPC
[sigmove 16:29:41 DEBUG] transformed X296Mc.SPC -> X296MC.SPC
[sigmove 16:29:41 DEBUG] transformed X296Md.SPC -> X296MD.SPC
[sigmove 16:29:41 DEBUG] transformed X296Me.SPC -> X296ME.SPC
[sigmove 16:29:41 DEBUG] transformed X296Mf.SPC -> X296MF.SPC
[Status 16:29:41 INFO] data for X296 transferred to science data processing
[Tidy 16:29:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:29:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:29:41 INFO] resetting WatchDogTimer
[Status 16:29:42 INFO] Starting Set [AERI set: name Y296, 6 scans, 0 angle, D16300 command]
[Ingest 16:29:42 INFO] Sending XML status message
[Status 16:29:42 INFO] Mirror angle: 0
[Mirror 16:29:42 INFO] rotating to position Y
[Status 16:29:43 INFO] .SET file for ACQ96 ready
[Ingest 16:29:43 INFO] Starting acquisition
[Status 16:29:43 INFO] reading housekeeping
[Status 16:30:01 INFO] acquire complete
[Status 16:30:01 INFO] writing housekeeping
[Sequencer 16:30:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:30:01 INFO] incremented Y scene to 296 completed views
[Sequencer 16:30:01 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:30:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:30:01 INFO] incremented to [AERI set: name Z296, 6 scans, 0 angle, D16300 command] set
[sigmove 16:30:01 INFO] Y296.SIG(18)
[sigmove 16:30:01 DEBUG] transformed Y296Ma.SPC -> Y296MA.SPC
[sigmove 16:30:01 DEBUG] transformed Y296Mb.SPC -> Y296MB.SPC
[sigmove 16:30:01 DEBUG] transformed Y296Mc.SPC -> Y296MC.SPC
[sigmove 16:30:01 DEBUG] transformed Y296Md.SPC -> Y296MD.SPC
[sigmove 16:30:01 DEBUG] transformed Y296Me.SPC -> Y296ME.SPC
[sigmove 16:30:01 DEBUG] transformed Y296Mf.SPC -> Y296MF.SPC
[Status 16:30:02 INFO] data for Y296 transferred to science data processing
[Tidy 16:30:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:30:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:30:02 INFO] resetting WatchDogTimer
[Status 16:30:02 INFO] Starting Set [AERI set: name Z296, 6 scans, 0 angle, D16300 command]
[Ingest 16:30:02 INFO] Sending XML status message
[Status 16:30:02 INFO] Mirror angle: 0
[Mirror 16:30:02 INFO] rotating to position Z
[Status 16:30:03 INFO] .SET file for ACQ96 ready
[Ingest 16:30:03 INFO] Starting acquisition
[Status 16:30:03 INFO] reading housekeeping
[Status 16:30:21 INFO] acquire complete
[Status 16:30:22 INFO] writing housekeeping
[Sequencer 16:30:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:30:22 INFO] incremented Z scene to 296 completed views
[Sequencer 16:30:22 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:30:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:30:22 INFO] incremented to [AERI set: name H297, 6 scans, 60 angle, D22500 command] set
[sigmove 16:30:22 INFO] Z296.SIG(18)
[sigmove 16:30:22 DEBUG] transformed Z296Ma.SPC -> Z296MA.SPC
[sigmove 16:30:22 DEBUG] transformed Z296Mb.SPC -> Z296MB.SPC
[sigmove 16:30:22 DEBUG] transformed Z296Mc.SPC -> Z296MC.SPC
[sigmove 16:30:22 DEBUG] transformed Z296Md.SPC -> Z296MD.SPC
[sigmove 16:30:22 DEBUG] transformed Z296Me.SPC -> Z296ME.SPC
[sigmove 16:30:22 DEBUG] transformed Z296Mf.SPC -> Z296MF.SPC
[Status 16:30:22 INFO] data for Z296 transferred to science data processing
[Tidy 16:30:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:30:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:30:22 INFO] resetting WatchDogTimer
[Status 16:30:22 INFO] Starting Set [AERI set: name H297, 6 scans, 60 angle, D22500 command]
[Ingest 16:30:22 INFO] Sending XML status message
[Status 16:30:22 INFO] Mirror angle: 60
[Mirror 16:30:22 INFO] rotating to position H
[Status 16:30:23 INFO] .SET file for ACQ96 ready
[Ingest 16:30:24 INFO] Starting acquisition
[Status 16:30:24 INFO] reading housekeeping
[Status 16:30:42 INFO] acquire complete
[Status 16:30:43 INFO] writing housekeeping
[Sequencer 16:30:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:30:43 INFO] incremented H scene to 297 completed views
[Sequencer 16:30:43 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:30:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:30:43 INFO] incremented to [AERI set: name A297, 6 scans, 120 angle, D28300 command] set
[sigmove 16:30:43 INFO] H297.SIG(18)
[sigmove 16:30:43 DEBUG] transformed H297Ma.SPC -> H297MA.SPC
[sigmove 16:30:43 DEBUG] transformed H297Mb.SPC -> H297MB.SPC
[sigmove 16:30:43 DEBUG] transformed H297Mc.SPC -> H297MC.SPC
[sigmove 16:30:43 DEBUG] transformed H297Md.SPC -> H297MD.SPC
[sigmove 16:30:43 DEBUG] transformed H297Me.SPC -> H297ME.SPC
[sigmove 16:30:43 DEBUG] transformed H297Mf.SPC -> H297MF.SPC
[Status 16:30:43 INFO] data for H297 transferred to science data processing
[Tidy 16:30:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:30:43 INFO] A295.FIN(19),H295.FIN(19),S295.FIN(19),T295.FIN(19),U295.FIN(19),V295.FIN(19),W295.FIN(19),X295.FIN(19),Y295.FIN(19),Z295.FIN(19),A296.FIN(19),H296.FIN(19),S296.FIN(19),T296.FIN(19),U296.FIN(19),V296.FIN(19),W296.FIN(19),X296.FIN(19),Y296.FIN(19),Z296.FIN(19)
[sigmove 16:30:43 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:30:43 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:30:48 DEBUG] done zipping
[WatchDog 16:30:49 INFO] resetting WatchDogTimer
[Status 16:30:49 INFO] Starting Set [AERI set: name A297, 6 scans, 120 angle, D28300 command]
[Ingest 16:30:49 INFO] Sending XML status message
[Status 16:30:49 INFO] Mirror angle: 120
[Mirror 16:30:49 INFO] rotating to position A
[Status 16:30:50 INFO] .SET file for ACQ96 ready
[Ingest 16:30:51 INFO] Starting acquisition
[Status 16:30:51 INFO] reading housekeeping
[Status 16:31:09 INFO] acquire complete
[Status 16:31:10 INFO] writing housekeeping
[Sequencer 16:31:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:31:10 INFO] incremented A scene to 297 completed views
[Sequencer 16:31:10 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:31:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:31:10 INFO] incremented to [AERI set: name S297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:31:10 INFO] A297.SIG(18)
[sigmove 16:31:10 DEBUG] transformed A297Ma.SPC -> A297MA.SPC
[sigmove 16:31:10 DEBUG] transformed A297Mb.SPC -> A297MB.SPC
[sigmove 16:31:10 DEBUG] transformed A297Mc.SPC -> A297MC.SPC
[sigmove 16:31:10 DEBUG] transformed A297Md.SPC -> A297MD.SPC
[sigmove 16:31:10 DEBUG] transformed A297Me.SPC -> A297ME.SPC
[sigmove 16:31:10 DEBUG] transformed A297Mf.SPC -> A297MF.SPC
[Status 16:31:10 INFO] data for A297 transferred to science data processing
[Tidy 16:31:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:31:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:31:10 INFO] resetting WatchDogTimer
[Status 16:31:10 INFO] Starting Set [AERI set: name S297, 6 scans, 0 angle, D16300 command]
[Ingest 16:31:10 INFO] Sending XML status message
[Status 16:31:10 INFO] Mirror angle: 0
[Mirror 16:31:11 INFO] rotating to position S
[Status 16:31:12 INFO] .SET file for ACQ96 ready
[Ingest 16:31:13 INFO] Starting acquisition
[Status 16:31:13 INFO] reading housekeeping
[Status 16:31:30 INFO] acquire complete
[Status 16:31:31 INFO] writing housekeeping
[Sequencer 16:31:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:31:31 INFO] incremented S scene to 297 completed views
[Sequencer 16:31:31 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:31:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:31:31 INFO] incremented to [AERI set: name T297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:31:31 INFO] S297.SIG(18)
[sigmove 16:31:31 DEBUG] transformed S297Ma.SPC -> S297MA.SPC
[sigmove 16:31:31 DEBUG] transformed S297Mb.SPC -> S297MB.SPC
[sigmove 16:31:31 DEBUG] transformed S297Mc.SPC -> S297MC.SPC
[sigmove 16:31:31 DEBUG] transformed S297Md.SPC -> S297MD.SPC
[sigmove 16:31:31 DEBUG] transformed S297Me.SPC -> S297ME.SPC
[sigmove 16:31:31 DEBUG] transformed S297Mf.SPC -> S297MF.SPC
[Status 16:31:31 INFO] data for S297 transferred to science data processing
[Tidy 16:31:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:31:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:31:31 INFO] resetting WatchDogTimer
[Status 16:31:32 INFO] Starting Set [AERI set: name T297, 6 scans, 0 angle, D16300 command]
[Ingest 16:31:32 INFO] Sending XML status message
[Status 16:31:32 INFO] Mirror angle: 0
[Mirror 16:31:32 INFO] rotating to position T
[Status 16:31:33 INFO] .SET file for ACQ96 ready
[Ingest 16:31:33 INFO] Starting acquisition
[Status 16:31:33 INFO] reading housekeeping
[Status 16:31:52 INFO] acquire complete
[Status 16:31:53 INFO] writing housekeeping
[Sequencer 16:31:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:31:53 INFO] incremented T scene to 297 completed views
[Sequencer 16:31:53 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:31:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:31:53 INFO] incremented to [AERI set: name U297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:31:53 INFO] T297.SIG(18)
[sigmove 16:31:53 DEBUG] transformed T297Ma.SPC -> T297MA.SPC
[sigmove 16:31:53 DEBUG] transformed T297Mb.SPC -> T297MB.SPC
[sigmove 16:31:53 DEBUG] transformed T297Mc.SPC -> T297MC.SPC
[sigmove 16:31:53 DEBUG] transformed T297Md.SPC -> T297MD.SPC
[sigmove 16:31:53 DEBUG] transformed T297Me.SPC -> T297ME.SPC
[sigmove 16:31:53 DEBUG] transformed T297Mf.SPC -> T297MF.SPC
[Status 16:31:53 INFO] data for T297 transferred to science data processing
[Tidy 16:31:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:31:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:31:53 INFO] resetting WatchDogTimer
[Status 16:31:53 INFO] Starting Set [AERI set: name U297, 6 scans, 0 angle, D16300 command]
[Ingest 16:31:53 INFO] Sending XML status message
[Status 16:31:53 INFO] Mirror angle: 0
[Mirror 16:31:53 INFO] rotating to position U
[Status 16:31:54 INFO] .SET file for ACQ96 ready
[Ingest 16:31:54 INFO] Starting acquisition
[Status 16:31:55 INFO] reading housekeeping
[Status 16:32:12 INFO] acquire complete
[Status 16:32:13 INFO] writing housekeeping
[Sequencer 16:32:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:32:13 INFO] incremented U scene to 297 completed views
[Sequencer 16:32:13 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:32:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:32:13 INFO] incremented to [AERI set: name V297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:32:13 INFO] U297.SIG(18)
[sigmove 16:32:13 DEBUG] transformed U297Ma.SPC -> U297MA.SPC
[sigmove 16:32:13 DEBUG] transformed U297Mb.SPC -> U297MB.SPC
[sigmove 16:32:13 DEBUG] transformed U297Mc.SPC -> U297MC.SPC
[sigmove 16:32:13 DEBUG] transformed U297Md.SPC -> U297MD.SPC
[sigmove 16:32:13 DEBUG] transformed U297Me.SPC -> U297ME.SPC
[sigmove 16:32:13 DEBUG] transformed U297Mf.SPC -> U297MF.SPC
[Status 16:32:13 INFO] data for U297 transferred to science data processing
[Tidy 16:32:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:32:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:32:13 INFO] resetting WatchDogTimer
[Status 16:32:13 INFO] Starting Set [AERI set: name V297, 6 scans, 0 angle, D16300 command]
[Ingest 16:32:13 INFO] Sending XML status message
[Status 16:32:13 INFO] Mirror angle: 0
[Mirror 16:32:14 INFO] rotating to position V
[Status 16:32:14 INFO] .SET file for ACQ96 ready
[Ingest 16:32:14 INFO] Starting acquisition
[Status 16:32:15 INFO] reading housekeeping
[Status 16:32:32 INFO] acquire complete
[Status 16:32:33 INFO] writing housekeeping
[Sequencer 16:32:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:32:33 INFO] incremented V scene to 297 completed views
[Sequencer 16:32:33 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:32:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:32:33 INFO] incremented to [AERI set: name W297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:32:33 INFO] V297.SIG(18)
[sigmove 16:32:33 DEBUG] transformed V297Ma.SPC -> V297MA.SPC
[sigmove 16:32:33 DEBUG] transformed V297Mb.SPC -> V297MB.SPC
[sigmove 16:32:33 DEBUG] transformed V297Mc.SPC -> V297MC.SPC
[sigmove 16:32:33 DEBUG] transformed V297Md.SPC -> V297MD.SPC
[sigmove 16:32:33 DEBUG] transformed V297Me.SPC -> V297ME.SPC
[sigmove 16:32:33 DEBUG] transformed V297Mf.SPC -> V297MF.SPC
[Status 16:32:33 INFO] data for V297 transferred to science data processing
[Tidy 16:32:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:32:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:32:33 INFO] resetting WatchDogTimer
[Status 16:32:33 INFO] Starting Set [AERI set: name W297, 6 scans, 0 angle, D16300 command]
[Ingest 16:32:33 INFO] Sending XML status message
[Status 16:32:33 INFO] Mirror angle: 0
[Mirror 16:32:34 INFO] rotating to position W
[Status 16:32:34 INFO] .SET file for ACQ96 ready
[Ingest 16:32:35 INFO] Starting acquisition
[Status 16:32:35 INFO] reading housekeeping
[Status 16:32:52 INFO] acquire complete
[Status 16:32:53 INFO] writing housekeeping
[Sequencer 16:32:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:32:53 INFO] incremented W scene to 297 completed views
[Sequencer 16:32:53 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:32:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:32:53 INFO] incremented to [AERI set: name X297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:32:53 INFO] W297.SIG(18)
[sigmove 16:32:53 DEBUG] transformed W297Ma.SPC -> W297MA.SPC
[sigmove 16:32:53 DEBUG] transformed W297Mb.SPC -> W297MB.SPC
[sigmove 16:32:53 DEBUG] transformed W297Mc.SPC -> W297MC.SPC
[sigmove 16:32:53 DEBUG] transformed W297Md.SPC -> W297MD.SPC
[sigmove 16:32:53 DEBUG] transformed W297Me.SPC -> W297ME.SPC
[sigmove 16:32:53 DEBUG] transformed W297Mf.SPC -> W297MF.SPC
[Status 16:32:53 INFO] data for W297 transferred to science data processing
[Tidy 16:32:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:32:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:32:53 INFO] resetting WatchDogTimer
[Status 16:32:54 INFO] Starting Set [AERI set: name X297, 6 scans, 0 angle, D16300 command]
[Ingest 16:32:54 INFO] Sending XML status message
[Status 16:32:54 INFO] Mirror angle: 0
[Mirror 16:32:54 INFO] rotating to position X
[Status 16:32:54 INFO] .SET file for ACQ96 ready
[Ingest 16:32:55 INFO] Starting acquisition
[Status 16:32:55 INFO] reading housekeeping
[Status 16:33:12 INFO] acquire complete
[Status 16:33:13 INFO] writing housekeeping
[Sequencer 16:33:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:33:13 INFO] incremented X scene to 297 completed views
[Sequencer 16:33:13 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:33:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:33:13 INFO] incremented to [AERI set: name Y297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:33:13 INFO] X297.SIG(18)
[sigmove 16:33:13 DEBUG] transformed X297Ma.SPC -> X297MA.SPC
[sigmove 16:33:13 DEBUG] transformed X297Mb.SPC -> X297MB.SPC
[sigmove 16:33:13 DEBUG] transformed X297Mc.SPC -> X297MC.SPC
[sigmove 16:33:13 DEBUG] transformed X297Md.SPC -> X297MD.SPC
[sigmove 16:33:13 DEBUG] transformed X297Me.SPC -> X297ME.SPC
[sigmove 16:33:13 DEBUG] transformed X297Mf.SPC -> X297MF.SPC
[Status 16:33:13 INFO] data for X297 transferred to science data processing
[Tidy 16:33:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:33:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:33:13 INFO] resetting WatchDogTimer
[Status 16:33:14 INFO] Starting Set [AERI set: name Y297, 6 scans, 0 angle, D16300 command]
[Ingest 16:33:14 INFO] Sending XML status message
[Status 16:33:14 INFO] Mirror angle: 0
[Mirror 16:33:14 INFO] rotating to position Y
[Status 16:33:15 INFO] .SET file for ACQ96 ready
[Ingest 16:33:15 INFO] Starting acquisition
[Status 16:33:15 INFO] reading housekeeping
[Status 16:33:33 INFO] acquire complete
[Status 16:33:34 INFO] writing housekeeping
[Sequencer 16:33:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:33:34 INFO] incremented Y scene to 297 completed views
[Sequencer 16:33:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:33:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:33:34 INFO] incremented to [AERI set: name Z297, 6 scans, 0 angle, D16300 command] set
[sigmove 16:33:34 INFO] Y297.SIG(18)
[sigmove 16:33:34 DEBUG] transformed Y297Ma.SPC -> Y297MA.SPC
[sigmove 16:33:34 DEBUG] transformed Y297Mb.SPC -> Y297MB.SPC
[sigmove 16:33:34 DEBUG] transformed Y297Mc.SPC -> Y297MC.SPC
[sigmove 16:33:34 DEBUG] transformed Y297Md.SPC -> Y297MD.SPC
[sigmove 16:33:34 DEBUG] transformed Y297Me.SPC -> Y297ME.SPC
[sigmove 16:33:34 DEBUG] transformed Y297Mf.SPC -> Y297MF.SPC
[Status 16:33:34 INFO] data for Y297 transferred to science data processing
[Tidy 16:33:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:33:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:33:34 INFO] resetting WatchDogTimer
[Status 16:33:34 INFO] Starting Set [AERI set: name Z297, 6 scans, 0 angle, D16300 command]
[Ingest 16:33:34 INFO] Sending XML status message
[Status 16:33:34 INFO] Mirror angle: 0
[Mirror 16:33:34 INFO] rotating to position Z
[Status 16:33:35 INFO] .SET file for ACQ96 ready
[Ingest 16:33:35 INFO] Starting acquisition
[Status 16:33:36 INFO] reading housekeeping
[Status 16:33:53 INFO] acquire complete
[Status 16:33:54 INFO] writing housekeeping
[Sequencer 16:33:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:33:54 INFO] incremented Z scene to 297 completed views
[Sequencer 16:33:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:33:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:33:54 INFO] incremented to [AERI set: name A298, 6 scans, 120 angle, D28300 command] set
[sigmove 16:33:54 INFO] Z297.SIG(18)
[sigmove 16:33:54 DEBUG] transformed Z297Ma.SPC -> Z297MA.SPC
[sigmove 16:33:54 DEBUG] transformed Z297Mb.SPC -> Z297MB.SPC
[sigmove 16:33:54 DEBUG] transformed Z297Mc.SPC -> Z297MC.SPC
[sigmove 16:33:54 DEBUG] transformed Z297Md.SPC -> Z297MD.SPC
[sigmove 16:33:54 DEBUG] transformed Z297Me.SPC -> Z297ME.SPC
[sigmove 16:33:54 DEBUG] transformed Z297Mf.SPC -> Z297MF.SPC
[Status 16:33:54 INFO] data for Z297 transferred to science data processing
[Tidy 16:33:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:33:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:33:54 INFO] resetting WatchDogTimer
[Status 16:33:54 INFO] Starting Set [AERI set: name A298, 6 scans, 120 angle, D28300 command]
[Ingest 16:33:54 INFO] Sending XML status message
[Status 16:33:54 INFO] Mirror angle: 120
[Mirror 16:33:55 INFO] rotating to position A
[Status 16:33:56 INFO] .SET file for ACQ96 ready
[Ingest 16:33:56 INFO] Starting acquisition
[Status 16:33:57 INFO] reading housekeeping
[Status 16:34:14 INFO] acquire complete
[Status 16:34:15 INFO] writing housekeeping
[Sequencer 16:34:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:34:15 INFO] incremented A scene to 298 completed views
[Sequencer 16:34:15 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:34:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:34:15 INFO] incremented to [AERI set: name H298, 6 scans, 60 angle, D22500 command] set
[sigmove 16:34:15 INFO] A298.SIG(18)
[sigmove 16:34:15 DEBUG] transformed A298Ma.SPC -> A298MA.SPC
[sigmove 16:34:15 DEBUG] transformed A298Mb.SPC -> A298MB.SPC
[sigmove 16:34:15 DEBUG] transformed A298Mc.SPC -> A298MC.SPC
[sigmove 16:34:15 DEBUG] transformed A298Md.SPC -> A298MD.SPC
[sigmove 16:34:15 DEBUG] transformed A298Me.SPC -> A298ME.SPC
[sigmove 16:34:15 DEBUG] transformed A298Mf.SPC -> A298MF.SPC
[Status 16:34:15 INFO] data for A298 transferred to science data processing
[Tidy 16:34:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:34:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:34:15 INFO] resetting WatchDogTimer
[Status 16:34:15 INFO] Starting Set [AERI set: name H298, 6 scans, 60 angle, D22500 command]
[Ingest 16:34:15 INFO] Sending XML status message
[Status 16:34:15 INFO] Mirror angle: 60
[Mirror 16:34:16 INFO] rotating to position H
[Status 16:34:17 INFO] .SET file for ACQ96 ready
[Ingest 16:34:17 INFO] Starting acquisition
[Status 16:34:17 INFO] reading housekeeping
[Status 16:34:35 INFO] acquire complete
[Status 16:34:36 INFO] writing housekeeping
[Sequencer 16:34:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:34:36 INFO] incremented H scene to 298 completed views
[Sequencer 16:34:36 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:34:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:34:36 INFO] incremented to [AERI set: name S298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:34:36 INFO] H298.SIG(18)
[sigmove 16:34:36 DEBUG] transformed H298Ma.SPC -> H298MA.SPC
[sigmove 16:34:36 DEBUG] transformed H298Mb.SPC -> H298MB.SPC
[sigmove 16:34:36 DEBUG] transformed H298Mc.SPC -> H298MC.SPC
[sigmove 16:34:36 DEBUG] transformed H298Md.SPC -> H298MD.SPC
[sigmove 16:34:36 DEBUG] transformed H298Me.SPC -> H298ME.SPC
[sigmove 16:34:36 DEBUG] transformed H298Mf.SPC -> H298MF.SPC
[Status 16:34:36 INFO] data for H298 transferred to science data processing
[Tidy 16:34:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:34:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:34:36 INFO] resetting WatchDogTimer
[Status 16:34:37 INFO] Starting Set [AERI set: name S298, 6 scans, 0 angle, D16300 command]
[Ingest 16:34:37 INFO] Sending XML status message
[Status 16:34:37 INFO] Mirror angle: 0
[Mirror 16:34:37 INFO] rotating to position S
[Status 16:34:38 INFO] .SET file for ACQ96 ready
[Ingest 16:34:38 INFO] Starting acquisition
[Status 16:34:39 INFO] reading housekeeping
[Status 16:34:57 INFO] acquire complete
[Status 16:34:58 INFO] writing housekeeping
[Sequencer 16:34:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:34:58 INFO] incremented S scene to 298 completed views
[Sequencer 16:34:58 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:34:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:34:58 INFO] incremented to [AERI set: name T298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:34:58 INFO] S298.SIG(18)
[sigmove 16:34:58 DEBUG] transformed S298Ma.SPC -> S298MA.SPC
[sigmove 16:34:58 DEBUG] transformed S298Mb.SPC -> S298MB.SPC
[sigmove 16:34:58 DEBUG] transformed S298Mc.SPC -> S298MC.SPC
[sigmove 16:34:58 DEBUG] transformed S298Md.SPC -> S298MD.SPC
[sigmove 16:34:58 DEBUG] transformed S298Me.SPC -> S298ME.SPC
[sigmove 16:34:58 DEBUG] transformed S298Mf.SPC -> S298MF.SPC
[Status 16:34:58 INFO] data for S298 transferred to science data processing
[Tidy 16:34:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:34:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:34:58 INFO] resetting WatchDogTimer
[Status 16:34:58 INFO] Starting Set [AERI set: name T298, 6 scans, 0 angle, D16300 command]
[Ingest 16:34:58 INFO] Sending XML status message
[Status 16:34:58 INFO] Mirror angle: 0
[Mirror 16:34:58 INFO] rotating to position T
[Status 16:34:59 INFO] .SET file for ACQ96 ready
[Ingest 16:34:59 INFO] Starting acquisition
[Status 16:35:00 INFO] reading housekeeping
[Status 16:35:17 INFO] acquire complete
[Status 16:35:18 INFO] writing housekeeping
[Sequencer 16:35:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:35:18 INFO] incremented T scene to 298 completed views
[Sequencer 16:35:18 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:35:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:35:18 INFO] incremented to [AERI set: name U298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:35:18 INFO] T298.SIG(18)
[sigmove 16:35:18 DEBUG] transformed T298Ma.SPC -> T298MA.SPC
[sigmove 16:35:18 DEBUG] transformed T298Mb.SPC -> T298MB.SPC
[sigmove 16:35:18 DEBUG] transformed T298Mc.SPC -> T298MC.SPC
[sigmove 16:35:18 DEBUG] transformed T298Md.SPC -> T298MD.SPC
[sigmove 16:35:18 DEBUG] transformed T298Me.SPC -> T298ME.SPC
[sigmove 16:35:18 DEBUG] transformed T298Mf.SPC -> T298MF.SPC
[Status 16:35:18 INFO] data for T298 transferred to science data processing
[Tidy 16:35:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:35:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:35:18 INFO] resetting WatchDogTimer
[Status 16:35:18 INFO] Starting Set [AERI set: name U298, 6 scans, 0 angle, D16300 command]
[Ingest 16:35:18 INFO] Sending XML status message
[Status 16:35:18 INFO] Mirror angle: 0
[Mirror 16:35:19 INFO] rotating to position U
[Status 16:35:19 INFO] .SET file for ACQ96 ready
[Ingest 16:35:19 INFO] Starting acquisition
[Status 16:35:20 INFO] reading housekeeping
[Status 16:35:37 INFO] acquire complete
[Status 16:35:38 INFO] writing housekeeping
[Sequencer 16:35:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:35:38 INFO] incremented U scene to 298 completed views
[Sequencer 16:35:38 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:35:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:35:38 INFO] incremented to [AERI set: name V298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:35:38 INFO] U298.SIG(18)
[sigmove 16:35:38 DEBUG] transformed U298Ma.SPC -> U298MA.SPC
[sigmove 16:35:38 DEBUG] transformed U298Mb.SPC -> U298MB.SPC
[sigmove 16:35:38 DEBUG] transformed U298Mc.SPC -> U298MC.SPC
[sigmove 16:35:38 DEBUG] transformed U298Md.SPC -> U298MD.SPC
[sigmove 16:35:38 DEBUG] transformed U298Me.SPC -> U298ME.SPC
[sigmove 16:35:38 DEBUG] transformed U298Mf.SPC -> U298MF.SPC
[Status 16:35:38 INFO] data for U298 transferred to science data processing
[Tidy 16:35:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:35:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:35:38 INFO] resetting WatchDogTimer
[Status 16:35:38 INFO] Starting Set [AERI set: name V298, 6 scans, 0 angle, D16300 command]
[Ingest 16:35:38 INFO] Sending XML status message
[Status 16:35:38 INFO] Mirror angle: 0
[Mirror 16:35:39 INFO] rotating to position V
[Status 16:35:40 INFO] .SET file for ACQ96 ready
[Ingest 16:35:40 INFO] Starting acquisition
[Status 16:35:40 INFO] reading housekeeping
[Status 16:35:58 INFO] acquire complete
[Status 16:35:59 INFO] writing housekeeping
[Sequencer 16:35:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:35:59 INFO] incremented V scene to 298 completed views
[Sequencer 16:35:59 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:35:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:35:59 INFO] incremented to [AERI set: name W298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:35:59 INFO] V298.SIG(18)
[sigmove 16:35:59 DEBUG] transformed V298Ma.SPC -> V298MA.SPC
[sigmove 16:35:59 DEBUG] transformed V298Mb.SPC -> V298MB.SPC
[sigmove 16:35:59 DEBUG] transformed V298Mc.SPC -> V298MC.SPC
[sigmove 16:35:59 DEBUG] transformed V298Md.SPC -> V298MD.SPC
[sigmove 16:35:59 DEBUG] transformed V298Me.SPC -> V298ME.SPC
[sigmove 16:35:59 DEBUG] transformed V298Mf.SPC -> V298MF.SPC
[Status 16:35:59 INFO] data for V298 transferred to science data processing
[Tidy 16:35:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:35:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:35:59 INFO] resetting WatchDogTimer
[Status 16:36:00 INFO] Starting Set [AERI set: name W298, 6 scans, 0 angle, D16300 command]
[Ingest 16:36:00 INFO] Sending XML status message
[Status 16:36:00 INFO] Mirror angle: 0
[Mirror 16:36:00 INFO] rotating to position W
[Status 16:36:01 INFO] .SET file for ACQ96 ready
[Ingest 16:36:01 INFO] Starting acquisition
[Status 16:36:01 INFO] reading housekeeping
[Status 16:36:19 INFO] acquire complete
[Status 16:36:20 INFO] writing housekeeping
[Sequencer 16:36:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:36:20 INFO] incremented W scene to 298 completed views
[Sequencer 16:36:20 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:36:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:36:20 INFO] incremented to [AERI set: name X298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:36:20 INFO] W298.SIG(18)
[sigmove 16:36:20 DEBUG] transformed W298Ma.SPC -> W298MA.SPC
[sigmove 16:36:20 DEBUG] transformed W298Mb.SPC -> W298MB.SPC
[sigmove 16:36:20 DEBUG] transformed W298Mc.SPC -> W298MC.SPC
[sigmove 16:36:20 DEBUG] transformed W298Md.SPC -> W298MD.SPC
[sigmove 16:36:20 DEBUG] transformed W298Me.SPC -> W298ME.SPC
[sigmove 16:36:20 DEBUG] transformed W298Mf.SPC -> W298MF.SPC
[Status 16:36:20 INFO] data for W298 transferred to science data processing
[Tidy 16:36:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:36:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:36:20 INFO] resetting WatchDogTimer
[Status 16:36:20 INFO] Starting Set [AERI set: name X298, 6 scans, 0 angle, D16300 command]
[Ingest 16:36:20 INFO] Sending XML status message
[Status 16:36:20 INFO] Mirror angle: 0
[Mirror 16:36:20 INFO] rotating to position X
[Status 16:36:21 INFO] .SET file for ACQ96 ready
[Ingest 16:36:21 INFO] Starting acquisition
[Status 16:36:22 INFO] reading housekeeping
[Status 16:36:39 INFO] acquire complete
[Status 16:36:40 INFO] writing housekeeping
[Sequencer 16:36:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:36:40 INFO] incremented X scene to 298 completed views
[Sequencer 16:36:40 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:36:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:36:40 INFO] incremented to [AERI set: name Y298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:36:40 INFO] X298.SIG(18)
[sigmove 16:36:40 DEBUG] transformed X298Ma.SPC -> X298MA.SPC
[sigmove 16:36:40 DEBUG] transformed X298Mb.SPC -> X298MB.SPC
[sigmove 16:36:40 DEBUG] transformed X298Mc.SPC -> X298MC.SPC
[sigmove 16:36:40 DEBUG] transformed X298Md.SPC -> X298MD.SPC
[sigmove 16:36:40 DEBUG] transformed X298Me.SPC -> X298ME.SPC
[sigmove 16:36:40 DEBUG] transformed X298Mf.SPC -> X298MF.SPC
[Status 16:36:40 INFO] data for X298 transferred to science data processing
[Tidy 16:36:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:36:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:36:40 INFO] resetting WatchDogTimer
[Status 16:36:40 INFO] Starting Set [AERI set: name Y298, 6 scans, 0 angle, D16300 command]
[Ingest 16:36:40 INFO] Sending XML status message
[Status 16:36:40 INFO] Mirror angle: 0
[Mirror 16:36:41 INFO] rotating to position Y
[Status 16:36:41 INFO] .SET file for ACQ96 ready
[Ingest 16:36:41 INFO] Starting acquisition
[Status 16:36:42 INFO] reading housekeeping
[Status 16:36:59 INFO] acquire complete
[Status 16:37:00 INFO] writing housekeeping
[Sequencer 16:37:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:37:00 INFO] incremented Y scene to 298 completed views
[Sequencer 16:37:00 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:37:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:37:00 INFO] incremented to [AERI set: name Z298, 6 scans, 0 angle, D16300 command] set
[sigmove 16:37:00 INFO] Y298.SIG(18)
[sigmove 16:37:00 DEBUG] transformed Y298Ma.SPC -> Y298MA.SPC
[sigmove 16:37:00 DEBUG] transformed Y298Mb.SPC -> Y298MB.SPC
[sigmove 16:37:00 DEBUG] transformed Y298Mc.SPC -> Y298MC.SPC
[sigmove 16:37:00 DEBUG] transformed Y298Md.SPC -> Y298MD.SPC
[sigmove 16:37:00 DEBUG] transformed Y298Me.SPC -> Y298ME.SPC
[sigmove 16:37:00 DEBUG] transformed Y298Mf.SPC -> Y298MF.SPC
[Status 16:37:00 INFO] data for Y298 transferred to science data processing
[Tidy 16:37:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:37:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:37:00 INFO] resetting WatchDogTimer
[Status 16:37:00 INFO] Starting Set [AERI set: name Z298, 6 scans, 0 angle, D16300 command]
[Ingest 16:37:00 INFO] Sending XML status message
[Status 16:37:00 INFO] Mirror angle: 0
[Mirror 16:37:01 INFO] rotating to position Z
[Status 16:37:01 INFO] .SET file for ACQ96 ready
[Ingest 16:37:02 INFO] Starting acquisition
[Status 16:37:02 INFO] reading housekeeping
[Status 16:37:19 INFO] acquire complete
[Status 16:37:20 INFO] writing housekeeping
[Sequencer 16:37:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:37:20 INFO] incremented Z scene to 298 completed views
[Sequencer 16:37:20 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:37:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:37:20 INFO] incremented to [AERI set: name H299, 6 scans, 60 angle, D22500 command] set
[sigmove 16:37:20 INFO] Z298.SIG(18)
[sigmove 16:37:20 DEBUG] transformed Z298Ma.SPC -> Z298MA.SPC
[sigmove 16:37:20 DEBUG] transformed Z298Mb.SPC -> Z298MB.SPC
[sigmove 16:37:20 DEBUG] transformed Z298Mc.SPC -> Z298MC.SPC
[sigmove 16:37:20 DEBUG] transformed Z298Md.SPC -> Z298MD.SPC
[sigmove 16:37:20 DEBUG] transformed Z298Me.SPC -> Z298ME.SPC
[sigmove 16:37:20 DEBUG] transformed Z298Mf.SPC -> Z298MF.SPC
[Status 16:37:20 INFO] data for Z298 transferred to science data processing
[Tidy 16:37:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:37:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:37:20 INFO] resetting WatchDogTimer
[Status 16:37:21 INFO] Starting Set [AERI set: name H299, 6 scans, 60 angle, D22500 command]
[Ingest 16:37:21 INFO] Sending XML status message
[Status 16:37:21 INFO] Mirror angle: 60
[Mirror 16:37:21 INFO] rotating to position H
[Status 16:37:22 INFO] .SET file for ACQ96 ready
[Ingest 16:37:22 INFO] Starting acquisition
[Status 16:37:23 INFO] reading housekeeping
[Status 16:37:40 INFO] acquire complete
[Status 16:37:42 INFO] writing housekeeping
[Sequencer 16:37:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:37:42 INFO] incremented H scene to 299 completed views
[Sequencer 16:37:42 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:37:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:37:42 INFO] incremented to [AERI set: name A299, 6 scans, 120 angle, D28300 command] set
[sigmove 16:37:42 INFO] H299.SIG(18)
[sigmove 16:37:42 DEBUG] transformed H299Ma.SPC -> H299MA.SPC
[sigmove 16:37:42 DEBUG] transformed H299Mb.SPC -> H299MB.SPC
[sigmove 16:37:42 DEBUG] transformed H299Mc.SPC -> H299MC.SPC
[sigmove 16:37:42 DEBUG] transformed H299Md.SPC -> H299MD.SPC
[sigmove 16:37:42 DEBUG] transformed H299Me.SPC -> H299ME.SPC
[sigmove 16:37:42 DEBUG] transformed H299Mf.SPC -> H299MF.SPC
[Status 16:37:42 INFO] data for H299 transferred to science data processing
[Tidy 16:37:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:37:42 INFO] A297.FIN(19),H297.FIN(19),S297.FIN(19),T297.FIN(19),U297.FIN(19),V297.FIN(19),W297.FIN(19),X297.FIN(19),Y297.FIN(19),Z297.FIN(19),A298.FIN(19),H298.FIN(19),S298.FIN(19),T298.FIN(19),U298.FIN(19),V298.FIN(19),W298.FIN(19),X298.FIN(19),Y298.FIN(19),Z298.FIN(19)
[sigmove 16:37:42 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:37:42 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:37:47 DEBUG] done zipping
[WatchDog 16:37:47 INFO] resetting WatchDogTimer
[Status 16:37:48 INFO] Starting Set [AERI set: name A299, 6 scans, 120 angle, D28300 command]
[Ingest 16:37:48 INFO] Sending XML status message
[Status 16:37:48 INFO] Mirror angle: 120
[Mirror 16:37:48 INFO] rotating to position A
[Status 16:37:49 INFO] .SET file for ACQ96 ready
[Ingest 16:37:49 INFO] Starting acquisition
[Status 16:37:50 INFO] reading housekeeping
[Status 16:38:07 INFO] acquire complete
[Status 16:38:08 INFO] writing housekeeping
[Sequencer 16:38:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:38:08 INFO] incremented A scene to 299 completed views
[Sequencer 16:38:08 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:38:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:38:08 INFO] incremented to [AERI set: name S299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:38:08 INFO] A299.SIG(18)
[sigmove 16:38:08 DEBUG] transformed A299Ma.SPC -> A299MA.SPC
[sigmove 16:38:08 DEBUG] transformed A299Mb.SPC -> A299MB.SPC
[sigmove 16:38:08 DEBUG] transformed A299Mc.SPC -> A299MC.SPC
[sigmove 16:38:08 DEBUG] transformed A299Md.SPC -> A299MD.SPC
[sigmove 16:38:08 DEBUG] transformed A299Me.SPC -> A299ME.SPC
[sigmove 16:38:08 DEBUG] transformed A299Mf.SPC -> A299MF.SPC
[Status 16:38:08 INFO] data for A299 transferred to science data processing
[Tidy 16:38:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:38:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:38:08 INFO] resetting WatchDogTimer
[Status 16:38:09 INFO] Starting Set [AERI set: name S299, 6 scans, 0 angle, D16300 command]
[Ingest 16:38:09 INFO] Sending XML status message
[Status 16:38:09 INFO] Mirror angle: 0
[Mirror 16:38:09 INFO] rotating to position S
[Status 16:38:11 INFO] .SET file for ACQ96 ready
[Ingest 16:38:11 INFO] Starting acquisition
[Status 16:38:11 INFO] reading housekeeping
[Status 16:38:29 INFO] acquire complete
[Status 16:38:30 INFO] writing housekeeping
[Sequencer 16:38:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:38:30 INFO] incremented S scene to 299 completed views
[Sequencer 16:38:30 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:38:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:38:30 INFO] incremented to [AERI set: name T299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:38:30 INFO] S299.SIG(18)
[sigmove 16:38:30 DEBUG] transformed S299Ma.SPC -> S299MA.SPC
[sigmove 16:38:30 DEBUG] transformed S299Mb.SPC -> S299MB.SPC
[sigmove 16:38:30 DEBUG] transformed S299Mc.SPC -> S299MC.SPC
[sigmove 16:38:30 DEBUG] transformed S299Md.SPC -> S299MD.SPC
[sigmove 16:38:30 DEBUG] transformed S299Me.SPC -> S299ME.SPC
[sigmove 16:38:30 DEBUG] transformed S299Mf.SPC -> S299MF.SPC
[Status 16:38:30 INFO] data for S299 transferred to science data processing
[Tidy 16:38:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:38:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:38:30 INFO] resetting WatchDogTimer
[Status 16:38:30 INFO] Starting Set [AERI set: name T299, 6 scans, 0 angle, D16300 command]
[Ingest 16:38:30 INFO] Sending XML status message
[Status 16:38:30 INFO] Mirror angle: 0
[Mirror 16:38:30 INFO] rotating to position T
[Status 16:38:31 INFO] .SET file for ACQ96 ready
[Ingest 16:38:31 INFO] Starting acquisition
[Status 16:38:32 INFO] reading housekeeping
[Status 16:38:49 INFO] acquire complete
[Status 16:38:50 INFO] writing housekeeping
[Sequencer 16:38:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:38:50 INFO] incremented T scene to 299 completed views
[Sequencer 16:38:50 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:38:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:38:50 INFO] incremented to [AERI set: name U299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:38:50 INFO] T299.SIG(18)
[sigmove 16:38:50 DEBUG] transformed T299Ma.SPC -> T299MA.SPC
[sigmove 16:38:50 DEBUG] transformed T299Mb.SPC -> T299MB.SPC
[sigmove 16:38:50 DEBUG] transformed T299Mc.SPC -> T299MC.SPC
[sigmove 16:38:50 DEBUG] transformed T299Md.SPC -> T299MD.SPC
[sigmove 16:38:50 DEBUG] transformed T299Me.SPC -> T299ME.SPC
[sigmove 16:38:50 DEBUG] transformed T299Mf.SPC -> T299MF.SPC
[Status 16:38:50 INFO] data for T299 transferred to science data processing
[Tidy 16:38:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:38:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:38:50 INFO] resetting WatchDogTimer
[Status 16:38:50 INFO] Starting Set [AERI set: name U299, 6 scans, 0 angle, D16300 command]
[Ingest 16:38:50 INFO] Sending XML status message
[Status 16:38:50 INFO] Mirror angle: 0
[Mirror 16:38:51 INFO] rotating to position U
[Status 16:38:51 INFO] .SET file for ACQ96 ready
[Ingest 16:38:52 INFO] Starting acquisition
[Status 16:38:52 INFO] reading housekeeping
[Status 16:39:09 INFO] acquire complete
[Status 16:39:10 INFO] writing housekeeping
[Sequencer 16:39:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:39:10 INFO] incremented U scene to 299 completed views
[Sequencer 16:39:10 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:39:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:39:10 INFO] incremented to [AERI set: name V299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:39:10 INFO] U299.SIG(18)
[sigmove 16:39:10 DEBUG] transformed U299Ma.SPC -> U299MA.SPC
[sigmove 16:39:10 DEBUG] transformed U299Mb.SPC -> U299MB.SPC
[sigmove 16:39:10 DEBUG] transformed U299Mc.SPC -> U299MC.SPC
[sigmove 16:39:10 DEBUG] transformed U299Md.SPC -> U299MD.SPC
[sigmove 16:39:10 DEBUG] transformed U299Me.SPC -> U299ME.SPC
[sigmove 16:39:10 DEBUG] transformed U299Mf.SPC -> U299MF.SPC
[Status 16:39:10 INFO] data for U299 transferred to science data processing
[Tidy 16:39:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:39:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:39:10 INFO] resetting WatchDogTimer
[Status 16:39:11 INFO] Starting Set [AERI set: name V299, 6 scans, 0 angle, D16300 command]
[Ingest 16:39:11 INFO] Sending XML status message
[Status 16:39:11 INFO] Mirror angle: 0
[Mirror 16:39:11 INFO] rotating to position V
[Status 16:39:11 INFO] .SET file for ACQ96 ready
[Ingest 16:39:12 INFO] Starting acquisition
[Status 16:39:12 INFO] reading housekeeping
[Status 16:39:29 INFO] acquire complete
[Status 16:39:30 INFO] writing housekeeping
[Sequencer 16:39:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:39:30 INFO] incremented V scene to 299 completed views
[Sequencer 16:39:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:39:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:39:30 INFO] incremented to [AERI set: name W299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:39:30 INFO] V299.SIG(18)
[sigmove 16:39:30 DEBUG] transformed V299Ma.SPC -> V299MA.SPC
[sigmove 16:39:30 DEBUG] transformed V299Mb.SPC -> V299MB.SPC
[sigmove 16:39:30 DEBUG] transformed V299Mc.SPC -> V299MC.SPC
[sigmove 16:39:30 DEBUG] transformed V299Md.SPC -> V299MD.SPC
[sigmove 16:39:30 DEBUG] transformed V299Me.SPC -> V299ME.SPC
[sigmove 16:39:30 DEBUG] transformed V299Mf.SPC -> V299MF.SPC
[Status 16:39:30 INFO] data for V299 transferred to science data processing
[Tidy 16:39:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:39:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:39:30 INFO] resetting WatchDogTimer
[Status 16:39:31 INFO] Starting Set [AERI set: name W299, 6 scans, 0 angle, D16300 command]
[Ingest 16:39:31 INFO] Sending XML status message
[Status 16:39:31 INFO] Mirror angle: 0
[Mirror 16:39:31 INFO] rotating to position W
[Status 16:39:32 INFO] .SET file for ACQ96 ready
[Ingest 16:39:32 INFO] Starting acquisition
[Status 16:39:32 INFO] reading housekeeping
[Status 16:39:50 INFO] acquire complete
[Status 16:39:51 INFO] writing housekeeping
[Sequencer 16:39:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:39:51 INFO] incremented W scene to 299 completed views
[Sequencer 16:39:51 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:39:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:39:51 INFO] incremented to [AERI set: name X299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:39:51 INFO] W299.SIG(18)
[sigmove 16:39:51 DEBUG] transformed W299Ma.SPC -> W299MA.SPC
[sigmove 16:39:51 DEBUG] transformed W299Mb.SPC -> W299MB.SPC
[sigmove 16:39:51 DEBUG] transformed W299Mc.SPC -> W299MC.SPC
[sigmove 16:39:51 DEBUG] transformed W299Md.SPC -> W299MD.SPC
[sigmove 16:39:51 DEBUG] transformed W299Me.SPC -> W299ME.SPC
[sigmove 16:39:51 DEBUG] transformed W299Mf.SPC -> W299MF.SPC
[Status 16:39:51 INFO] data for W299 transferred to science data processing
[Tidy 16:39:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:39:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:39:51 INFO] resetting WatchDogTimer
[Status 16:39:51 INFO] Starting Set [AERI set: name X299, 6 scans, 0 angle, D16300 command]
[Ingest 16:39:51 INFO] Sending XML status message
[Status 16:39:51 INFO] Mirror angle: 0
[Mirror 16:39:51 INFO] rotating to position X
[Status 16:39:52 INFO] .SET file for ACQ96 ready
[Ingest 16:39:52 INFO] Starting acquisition
[Status 16:39:52 INFO] reading housekeeping
[Status 16:40:10 INFO] acquire complete
[Status 16:40:11 INFO] writing housekeeping
[Sequencer 16:40:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:40:11 INFO] incremented X scene to 299 completed views
[Sequencer 16:40:11 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:40:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:40:11 INFO] incremented to [AERI set: name Y299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:40:11 INFO] X299.SIG(18)
[sigmove 16:40:11 DEBUG] transformed X299Ma.SPC -> X299MA.SPC
[sigmove 16:40:11 DEBUG] transformed X299Mb.SPC -> X299MB.SPC
[sigmove 16:40:11 DEBUG] transformed X299Mc.SPC -> X299MC.SPC
[sigmove 16:40:11 DEBUG] transformed X299Md.SPC -> X299MD.SPC
[sigmove 16:40:11 DEBUG] transformed X299Me.SPC -> X299ME.SPC
[sigmove 16:40:11 DEBUG] transformed X299Mf.SPC -> X299MF.SPC
[Status 16:40:11 INFO] data for X299 transferred to science data processing
[Tidy 16:40:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:40:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:40:11 INFO] resetting WatchDogTimer
[Status 16:40:11 INFO] Starting Set [AERI set: name Y299, 6 scans, 0 angle, D16300 command]
[Ingest 16:40:11 INFO] Sending XML status message
[Status 16:40:11 INFO] Mirror angle: 0
[Mirror 16:40:11 INFO] rotating to position Y
[Status 16:40:12 INFO] .SET file for ACQ96 ready
[Ingest 16:40:12 INFO] Starting acquisition
[Status 16:40:13 INFO] reading housekeeping
[Status 16:40:30 INFO] acquire complete
[Status 16:40:31 INFO] writing housekeeping
[Sequencer 16:40:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:40:31 INFO] incremented Y scene to 299 completed views
[Sequencer 16:40:31 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:40:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:40:31 INFO] incremented to [AERI set: name Z299, 6 scans, 0 angle, D16300 command] set
[sigmove 16:40:31 INFO] Y299.SIG(18)
[sigmove 16:40:31 DEBUG] transformed Y299Ma.SPC -> Y299MA.SPC
[sigmove 16:40:31 DEBUG] transformed Y299Mb.SPC -> Y299MB.SPC
[sigmove 16:40:31 DEBUG] transformed Y299Mc.SPC -> Y299MC.SPC
[sigmove 16:40:31 DEBUG] transformed Y299Md.SPC -> Y299MD.SPC
[sigmove 16:40:31 DEBUG] transformed Y299Me.SPC -> Y299ME.SPC
[sigmove 16:40:31 DEBUG] transformed Y299Mf.SPC -> Y299MF.SPC
[Status 16:40:31 INFO] data for Y299 transferred to science data processing
[Tidy 16:40:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:40:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:40:31 INFO] resetting WatchDogTimer
[Status 16:40:31 INFO] Starting Set [AERI set: name Z299, 6 scans, 0 angle, D16300 command]
[Ingest 16:40:31 INFO] Sending XML status message
[Status 16:40:31 INFO] Mirror angle: 0
[Mirror 16:40:32 INFO] rotating to position Z
[Status 16:40:32 INFO] .SET file for ACQ96 ready
[Ingest 16:40:32 INFO] Starting acquisition
[Status 16:40:33 INFO] reading housekeeping
[Status 16:40:50 INFO] acquire complete
[Status 16:40:51 INFO] writing housekeeping
[Sequencer 16:40:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:40:51 INFO] incremented Z scene to 299 completed views
[Sequencer 16:40:51 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:40:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:40:51 INFO] incremented to [AERI set: name A300, 6 scans, 120 angle, D28300 command] set
[sigmove 16:40:51 INFO] Z299.SIG(18)
[sigmove 16:40:51 DEBUG] transformed Z299Ma.SPC -> Z299MA.SPC
[sigmove 16:40:51 DEBUG] transformed Z299Mb.SPC -> Z299MB.SPC
[sigmove 16:40:51 DEBUG] transformed Z299Mc.SPC -> Z299MC.SPC
[sigmove 16:40:51 DEBUG] transformed Z299Md.SPC -> Z299MD.SPC
[sigmove 16:40:51 DEBUG] transformed Z299Me.SPC -> Z299ME.SPC
[sigmove 16:40:51 DEBUG] transformed Z299Mf.SPC -> Z299MF.SPC
[Status 16:40:51 INFO] data for Z299 transferred to science data processing
[Tidy 16:40:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:40:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:40:51 INFO] resetting WatchDogTimer
[Status 16:40:51 INFO] Starting Set [AERI set: name A300, 6 scans, 120 angle, D28300 command]
[Ingest 16:40:51 INFO] Sending XML status message
[Status 16:40:51 INFO] Mirror angle: 120
[Mirror 16:40:52 INFO] rotating to position A
[Status 16:40:53 INFO] .SET file for ACQ96 ready
[Ingest 16:40:54 INFO] Starting acquisition
[Status 16:40:54 INFO] reading housekeeping
[Status 16:41:11 INFO] acquire complete
[Status 16:41:12 INFO] writing housekeeping
[Sequencer 16:41:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:41:12 INFO] incremented A scene to 300 completed views
[Sequencer 16:41:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:41:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:41:12 INFO] incremented to [AERI set: name H300, 6 scans, 60 angle, D22500 command] set
[sigmove 16:41:12 INFO] A300.SIG(18)
[sigmove 16:41:12 DEBUG] transformed A300Ma.SPC -> A300MA.SPC
[sigmove 16:41:12 DEBUG] transformed A300Mb.SPC -> A300MB.SPC
[sigmove 16:41:12 DEBUG] transformed A300Mc.SPC -> A300MC.SPC
[sigmove 16:41:12 DEBUG] transformed A300Md.SPC -> A300MD.SPC
[sigmove 16:41:12 DEBUG] transformed A300Me.SPC -> A300ME.SPC
[sigmove 16:41:12 DEBUG] transformed A300Mf.SPC -> A300MF.SPC
[Status 16:41:12 INFO] data for A300 transferred to science data processing
[Tidy 16:41:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:41:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:41:12 INFO] resetting WatchDogTimer
[Status 16:41:13 INFO] Starting Set [AERI set: name H300, 6 scans, 60 angle, D22500 command]
[Ingest 16:41:13 INFO] Sending XML status message
[Status 16:41:13 INFO] Mirror angle: 60
[Mirror 16:41:13 INFO] rotating to position H
[Status 16:41:14 INFO] .SET file for ACQ96 ready
[Ingest 16:41:14 INFO] Starting acquisition
[Status 16:41:15 INFO] reading housekeeping
[Status 16:41:33 INFO] acquire complete
[Status 16:41:34 INFO] writing housekeeping
[Sequencer 16:41:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:41:34 INFO] incremented H scene to 300 completed views
[Sequencer 16:41:34 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:41:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:41:34 INFO] incremented to [AERI set: name S300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:41:34 INFO] H300.SIG(18)
[sigmove 16:41:34 DEBUG] transformed H300Ma.SPC -> H300MA.SPC
[sigmove 16:41:34 DEBUG] transformed H300Mb.SPC -> H300MB.SPC
[sigmove 16:41:34 DEBUG] transformed H300Mc.SPC -> H300MC.SPC
[sigmove 16:41:34 DEBUG] transformed H300Md.SPC -> H300MD.SPC
[sigmove 16:41:34 DEBUG] transformed H300Me.SPC -> H300ME.SPC
[sigmove 16:41:34 DEBUG] transformed H300Mf.SPC -> H300MF.SPC
[Status 16:41:34 INFO] data for H300 transferred to science data processing
[Tidy 16:41:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:41:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:41:34 INFO] resetting WatchDogTimer
[Status 16:41:34 INFO] Starting Set [AERI set: name S300, 6 scans, 0 angle, D16300 command]
[Ingest 16:41:34 INFO] Sending XML status message
[Status 16:41:34 INFO] Mirror angle: 0
[Mirror 16:41:35 INFO] rotating to position S
[Status 16:41:36 INFO] .SET file for ACQ96 ready
[Ingest 16:41:36 INFO] Starting acquisition
[Status 16:41:36 INFO] reading housekeeping
[Status 16:41:54 INFO] acquire complete
[Status 16:41:55 INFO] writing housekeeping
[Sequencer 16:41:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:41:55 INFO] incremented S scene to 300 completed views
[Sequencer 16:41:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:41:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:41:55 INFO] incremented to [AERI set: name T300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:41:55 INFO] S300.SIG(18)
[sigmove 16:41:55 DEBUG] transformed S300Ma.SPC -> S300MA.SPC
[sigmove 16:41:55 DEBUG] transformed S300Mb.SPC -> S300MB.SPC
[sigmove 16:41:55 DEBUG] transformed S300Mc.SPC -> S300MC.SPC
[sigmove 16:41:55 DEBUG] transformed S300Md.SPC -> S300MD.SPC
[sigmove 16:41:55 DEBUG] transformed S300Me.SPC -> S300ME.SPC
[sigmove 16:41:55 DEBUG] transformed S300Mf.SPC -> S300MF.SPC
[Status 16:41:55 INFO] data for S300 transferred to science data processing
[Tidy 16:41:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:41:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:41:55 INFO] resetting WatchDogTimer
[Status 16:41:55 INFO] Starting Set [AERI set: name T300, 6 scans, 0 angle, D16300 command]
[Ingest 16:41:55 INFO] Sending XML status message
[Status 16:41:55 INFO] Mirror angle: 0
[Mirror 16:41:56 INFO] rotating to position T
[Status 16:41:56 INFO] .SET file for ACQ96 ready
[Ingest 16:41:57 INFO] Starting acquisition
[Status 16:41:57 INFO] reading housekeeping
[Status 16:42:14 INFO] acquire complete
[Status 16:42:15 INFO] writing housekeeping
[Sequencer 16:42:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:42:15 INFO] incremented T scene to 300 completed views
[Sequencer 16:42:15 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:42:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:42:15 INFO] incremented to [AERI set: name U300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:42:15 INFO] T300.SIG(18)
[sigmove 16:42:15 DEBUG] transformed T300Ma.SPC -> T300MA.SPC
[sigmove 16:42:15 DEBUG] transformed T300Mb.SPC -> T300MB.SPC
[sigmove 16:42:15 DEBUG] transformed T300Mc.SPC -> T300MC.SPC
[sigmove 16:42:15 DEBUG] transformed T300Md.SPC -> T300MD.SPC
[sigmove 16:42:15 DEBUG] transformed T300Me.SPC -> T300ME.SPC
[sigmove 16:42:15 DEBUG] transformed T300Mf.SPC -> T300MF.SPC
[Status 16:42:15 INFO] data for T300 transferred to science data processing
[Tidy 16:42:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:42:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:42:15 INFO] resetting WatchDogTimer
[Status 16:42:16 INFO] Starting Set [AERI set: name U300, 6 scans, 0 angle, D16300 command]
[Ingest 16:42:16 INFO] Sending XML status message
[Status 16:42:16 INFO] Mirror angle: 0
[Mirror 16:42:16 INFO] rotating to position U
[Status 16:42:16 INFO] .SET file for ACQ96 ready
[Ingest 16:42:17 INFO] Starting acquisition
[Status 16:42:17 INFO] reading housekeeping
[Status 16:42:34 INFO] acquire complete
[Status 16:42:35 INFO] writing housekeeping
[Sequencer 16:42:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:42:35 INFO] incremented U scene to 300 completed views
[Sequencer 16:42:35 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:42:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:42:35 INFO] incremented to [AERI set: name V300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:42:35 INFO] U300.SIG(18)
[sigmove 16:42:35 DEBUG] transformed U300Ma.SPC -> U300MA.SPC
[sigmove 16:42:35 DEBUG] transformed U300Mb.SPC -> U300MB.SPC
[sigmove 16:42:35 DEBUG] transformed U300Mc.SPC -> U300MC.SPC
[sigmove 16:42:35 DEBUG] transformed U300Md.SPC -> U300MD.SPC
[sigmove 16:42:35 DEBUG] transformed U300Me.SPC -> U300ME.SPC
[sigmove 16:42:35 DEBUG] transformed U300Mf.SPC -> U300MF.SPC
[Status 16:42:35 INFO] data for U300 transferred to science data processing
[Tidy 16:42:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:42:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:42:35 INFO] resetting WatchDogTimer
[Status 16:42:36 INFO] Starting Set [AERI set: name V300, 6 scans, 0 angle, D16300 command]
[Ingest 16:42:36 INFO] Sending XML status message
[Status 16:42:36 INFO] Mirror angle: 0
[Mirror 16:42:36 INFO] rotating to position V
[Status 16:42:37 INFO] .SET file for ACQ96 ready
[Ingest 16:42:37 INFO] Starting acquisition
[Status 16:42:37 INFO] reading housekeeping
[Status 16:42:55 INFO] acquire complete
[Status 16:42:56 INFO] writing housekeeping
[Sequencer 16:42:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:42:56 INFO] incremented V scene to 300 completed views
[Sequencer 16:42:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:42:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:42:56 INFO] incremented to [AERI set: name W300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:42:56 INFO] V300.SIG(18)
[sigmove 16:42:56 DEBUG] transformed V300Ma.SPC -> V300MA.SPC
[sigmove 16:42:56 DEBUG] transformed V300Mb.SPC -> V300MB.SPC
[sigmove 16:42:56 DEBUG] transformed V300Mc.SPC -> V300MC.SPC
[sigmove 16:42:56 DEBUG] transformed V300Md.SPC -> V300MD.SPC
[sigmove 16:42:56 DEBUG] transformed V300Me.SPC -> V300ME.SPC
[sigmove 16:42:56 DEBUG] transformed V300Mf.SPC -> V300MF.SPC
[Status 16:42:56 INFO] data for V300 transferred to science data processing
[Tidy 16:42:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:42:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:42:56 INFO] resetting WatchDogTimer
[Status 16:42:56 INFO] Starting Set [AERI set: name W300, 6 scans, 0 angle, D16300 command]
[Ingest 16:42:56 INFO] Sending XML status message
[Status 16:42:56 INFO] Mirror angle: 0
[Mirror 16:42:56 INFO] rotating to position W
[Status 16:42:57 INFO] .SET file for ACQ96 ready
[Ingest 16:42:57 INFO] Starting acquisition
[Status 16:42:57 INFO] reading housekeeping
[Status 16:43:15 INFO] acquire complete
[Status 16:43:16 INFO] writing housekeeping
[Sequencer 16:43:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:43:16 INFO] incremented W scene to 300 completed views
[Sequencer 16:43:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:43:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:43:16 INFO] incremented to [AERI set: name X300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:43:16 INFO] W300.SIG(18)
[sigmove 16:43:16 DEBUG] transformed W300Ma.SPC -> W300MA.SPC
[sigmove 16:43:16 DEBUG] transformed W300Mb.SPC -> W300MB.SPC
[sigmove 16:43:16 DEBUG] transformed W300Mc.SPC -> W300MC.SPC
[sigmove 16:43:16 DEBUG] transformed W300Md.SPC -> W300MD.SPC
[sigmove 16:43:16 DEBUG] transformed W300Me.SPC -> W300ME.SPC
[sigmove 16:43:16 DEBUG] transformed W300Mf.SPC -> W300MF.SPC
[Status 16:43:16 INFO] data for W300 transferred to science data processing
[Tidy 16:43:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:43:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:43:16 INFO] resetting WatchDogTimer
[Status 16:43:16 INFO] Starting Set [AERI set: name X300, 6 scans, 0 angle, D16300 command]
[Ingest 16:43:16 INFO] Sending XML status message
[Status 16:43:16 INFO] Mirror angle: 0
[Mirror 16:43:17 INFO] rotating to position X
[Status 16:43:17 INFO] .SET file for ACQ96 ready
[Ingest 16:43:17 INFO] Starting acquisition
[Status 16:43:18 INFO] reading housekeeping
[Status 16:43:35 INFO] acquire complete
[Status 16:43:36 INFO] writing housekeeping
[Sequencer 16:43:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:43:36 INFO] incremented X scene to 300 completed views
[Sequencer 16:43:36 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:43:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:43:36 INFO] incremented to [AERI set: name Y300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:43:36 INFO] X300.SIG(18)
[sigmove 16:43:36 DEBUG] transformed X300Ma.SPC -> X300MA.SPC
[sigmove 16:43:36 DEBUG] transformed X300Mb.SPC -> X300MB.SPC
[sigmove 16:43:36 DEBUG] transformed X300Mc.SPC -> X300MC.SPC
[sigmove 16:43:36 DEBUG] transformed X300Md.SPC -> X300MD.SPC
[sigmove 16:43:36 DEBUG] transformed X300Me.SPC -> X300ME.SPC
[sigmove 16:43:36 DEBUG] transformed X300Mf.SPC -> X300MF.SPC
[Status 16:43:36 INFO] data for X300 transferred to science data processing
[Tidy 16:43:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:43:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:43:36 INFO] resetting WatchDogTimer
[Status 16:43:36 INFO] Starting Set [AERI set: name Y300, 6 scans, 0 angle, D16300 command]
[Ingest 16:43:36 INFO] Sending XML status message
[Status 16:43:36 INFO] Mirror angle: 0
[Mirror 16:43:37 INFO] rotating to position Y
[Status 16:43:37 INFO] .SET file for ACQ96 ready
[Ingest 16:43:37 INFO] Starting acquisition
[Status 16:43:38 INFO] reading housekeeping
[Status 16:43:55 INFO] acquire complete
[Status 16:43:56 INFO] writing housekeeping
[Sequencer 16:43:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:43:56 INFO] incremented Y scene to 300 completed views
[Sequencer 16:43:56 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:43:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:43:56 INFO] incremented to [AERI set: name Z300, 6 scans, 0 angle, D16300 command] set
[sigmove 16:43:56 INFO] Y300.SIG(18)
[sigmove 16:43:56 DEBUG] transformed Y300Ma.SPC -> Y300MA.SPC
[sigmove 16:43:56 DEBUG] transformed Y300Mb.SPC -> Y300MB.SPC
[sigmove 16:43:56 DEBUG] transformed Y300Mc.SPC -> Y300MC.SPC
[sigmove 16:43:56 DEBUG] transformed Y300Md.SPC -> Y300MD.SPC
[sigmove 16:43:56 DEBUG] transformed Y300Me.SPC -> Y300ME.SPC
[sigmove 16:43:56 DEBUG] transformed Y300Mf.SPC -> Y300MF.SPC
[Status 16:43:56 INFO] data for Y300 transferred to science data processing
[Tidy 16:43:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:43:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:43:56 INFO] resetting WatchDogTimer
[Status 16:43:57 INFO] Starting Set [AERI set: name Z300, 6 scans, 0 angle, D16300 command]
[Ingest 16:43:57 INFO] Sending XML status message
[Status 16:43:57 INFO] Mirror angle: 0
[Mirror 16:43:57 INFO] rotating to position Z
[Status 16:43:57 INFO] .SET file for ACQ96 ready
[Ingest 16:43:58 INFO] Starting acquisition
[Status 16:43:58 INFO] reading housekeeping
[Status 16:44:15 INFO] acquire complete
[Status 16:44:16 INFO] writing housekeeping
[Sequencer 16:44:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:44:16 INFO] incremented Z scene to 300 completed views
[Sequencer 16:44:16 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:44:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:44:16 INFO] incremented to [AERI set: name H301, 6 scans, 60 angle, D22500 command] set
[sigmove 16:44:16 INFO] Z300.SIG(18)
[sigmove 16:44:16 DEBUG] transformed Z300Ma.SPC -> Z300MA.SPC
[sigmove 16:44:16 DEBUG] transformed Z300Mb.SPC -> Z300MB.SPC
[sigmove 16:44:16 DEBUG] transformed Z300Mc.SPC -> Z300MC.SPC
[sigmove 16:44:16 DEBUG] transformed Z300Md.SPC -> Z300MD.SPC
[sigmove 16:44:16 DEBUG] transformed Z300Me.SPC -> Z300ME.SPC
[sigmove 16:44:16 DEBUG] transformed Z300Mf.SPC -> Z300MF.SPC
[Status 16:44:16 INFO] data for Z300 transferred to science data processing
[Tidy 16:44:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:44:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:44:16 INFO] resetting WatchDogTimer
[Status 16:44:17 INFO] Starting Set [AERI set: name H301, 6 scans, 60 angle, D22500 command]
[Ingest 16:44:17 INFO] Sending XML status message
[Status 16:44:17 INFO] Mirror angle: 60
[Mirror 16:44:17 INFO] rotating to position H
[Status 16:44:18 INFO] .SET file for ACQ96 ready
[Ingest 16:44:18 INFO] Starting acquisition
[Status 16:44:19 INFO] reading housekeeping
[Status 16:44:37 INFO] acquire complete
[Status 16:44:38 INFO] writing housekeeping
[Sequencer 16:44:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:44:38 INFO] incremented H scene to 301 completed views
[Sequencer 16:44:38 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:44:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:44:38 INFO] incremented to [AERI set: name A301, 6 scans, 120 angle, D28300 command] set
[sigmove 16:44:38 INFO] H301.SIG(18)
[sigmove 16:44:38 DEBUG] transformed H301Ma.SPC -> H301MA.SPC
[sigmove 16:44:38 DEBUG] transformed H301Mb.SPC -> H301MB.SPC
[sigmove 16:44:38 DEBUG] transformed H301Mc.SPC -> H301MC.SPC
[sigmove 16:44:38 DEBUG] transformed H301Md.SPC -> H301MD.SPC
[sigmove 16:44:38 DEBUG] transformed H301Me.SPC -> H301ME.SPC
[sigmove 16:44:38 DEBUG] transformed H301Mf.SPC -> H301MF.SPC
[Status 16:44:38 INFO] data for H301 transferred to science data processing
[Tidy 16:44:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:44:38 INFO] A299.FIN(19),H299.FIN(19),S299.FIN(19),T299.FIN(19),U299.FIN(19),V299.FIN(19),W299.FIN(19),X299.FIN(19),Y299.FIN(19),Z299.FIN(19),A300.FIN(19),H300.FIN(19),S300.FIN(19),T300.FIN(19),U300.FIN(19),V300.FIN(19),W300.FIN(19),X300.FIN(19),Y300.FIN(19),Z300.FIN(19)
[sigmove 16:44:38 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:44:38 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:44:43 DEBUG] done zipping
[WatchDog 16:44:43 INFO] resetting WatchDogTimer
[Status 16:44:44 INFO] Starting Set [AERI set: name A301, 6 scans, 120 angle, D28300 command]
[Ingest 16:44:44 INFO] Sending XML status message
[Status 16:44:44 INFO] Mirror angle: 120
[Mirror 16:44:44 INFO] rotating to position A
[Status 16:44:45 INFO] .SET file for ACQ96 ready
[Ingest 16:44:46 INFO] Starting acquisition
[Status 16:44:46 INFO] reading housekeeping
[Status 16:45:04 INFO] acquire complete
[Status 16:45:05 INFO] writing housekeeping
[Sequencer 16:45:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:45:05 INFO] incremented A scene to 301 completed views
[Sequencer 16:45:05 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:45:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:45:05 INFO] incremented to [AERI set: name S301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:45:05 INFO] A301.SIG(18)
[sigmove 16:45:05 DEBUG] transformed A301Ma.SPC -> A301MA.SPC
[sigmove 16:45:05 DEBUG] transformed A301Mb.SPC -> A301MB.SPC
[sigmove 16:45:05 DEBUG] transformed A301Mc.SPC -> A301MC.SPC
[sigmove 16:45:05 DEBUG] transformed A301Md.SPC -> A301MD.SPC
[sigmove 16:45:05 DEBUG] transformed A301Me.SPC -> A301ME.SPC
[sigmove 16:45:05 DEBUG] transformed A301Mf.SPC -> A301MF.SPC
[Status 16:45:05 INFO] data for A301 transferred to science data processing
[Tidy 16:45:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:45:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:45:05 INFO] resetting WatchDogTimer
[Status 16:45:05 INFO] Starting Set [AERI set: name S301, 6 scans, 0 angle, D16300 command]
[Ingest 16:45:05 INFO] Sending XML status message
[Status 16:45:05 INFO] Mirror angle: 0
[Mirror 16:45:05 INFO] rotating to position S
[Status 16:45:07 INFO] .SET file for ACQ96 ready
[Ingest 16:45:07 INFO] Starting acquisition
[Status 16:45:08 INFO] reading housekeeping
[Status 16:45:25 INFO] acquire complete
[Status 16:45:26 INFO] writing housekeeping
[Sequencer 16:45:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:45:26 INFO] incremented S scene to 301 completed views
[Sequencer 16:45:26 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:45:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:45:26 INFO] incremented to [AERI set: name T301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:45:26 INFO] S301.SIG(18)
[sigmove 16:45:26 DEBUG] transformed S301Ma.SPC -> S301MA.SPC
[sigmove 16:45:26 DEBUG] transformed S301Mb.SPC -> S301MB.SPC
[sigmove 16:45:26 DEBUG] transformed S301Mc.SPC -> S301MC.SPC
[sigmove 16:45:26 DEBUG] transformed S301Md.SPC -> S301MD.SPC
[sigmove 16:45:26 DEBUG] transformed S301Me.SPC -> S301ME.SPC
[sigmove 16:45:26 DEBUG] transformed S301Mf.SPC -> S301MF.SPC
[Status 16:45:26 INFO] data for S301 transferred to science data processing
[Tidy 16:45:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:45:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:45:26 INFO] resetting WatchDogTimer
[Status 16:45:26 INFO] Starting Set [AERI set: name T301, 6 scans, 0 angle, D16300 command]
[Ingest 16:45:26 INFO] Sending XML status message
[Status 16:45:26 INFO] Mirror angle: 0
[Mirror 16:45:27 INFO] rotating to position T
[Status 16:45:27 INFO] .SET file for ACQ96 ready
[Ingest 16:45:28 INFO] Starting acquisition
[Status 16:45:30 INFO] reading housekeeping
[Status 16:45:47 INFO] acquire complete
[Status 16:45:48 INFO] writing housekeeping
[Sequencer 16:45:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:45:48 INFO] incremented T scene to 301 completed views
[Sequencer 16:45:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:45:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:45:48 INFO] incremented to [AERI set: name U301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:45:48 INFO] T301.SIG(18)
[sigmove 16:45:48 DEBUG] transformed T301Ma.SPC -> T301MA.SPC
[sigmove 16:45:48 DEBUG] transformed T301Mb.SPC -> T301MB.SPC
[sigmove 16:45:48 DEBUG] transformed T301Mc.SPC -> T301MC.SPC
[sigmove 16:45:48 DEBUG] transformed T301Md.SPC -> T301MD.SPC
[sigmove 16:45:48 DEBUG] transformed T301Me.SPC -> T301ME.SPC
[sigmove 16:45:48 DEBUG] transformed T301Mf.SPC -> T301MF.SPC
[Status 16:45:48 INFO] data for T301 transferred to science data processing
[Tidy 16:45:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:45:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:45:48 INFO] resetting WatchDogTimer
[Status 16:45:49 INFO] Starting Set [AERI set: name U301, 6 scans, 0 angle, D16300 command]
[Ingest 16:45:49 INFO] Sending XML status message
[Status 16:45:49 INFO] Mirror angle: 0
[Mirror 16:45:49 INFO] rotating to position U
[Status 16:45:50 INFO] .SET file for ACQ96 ready
[Ingest 16:45:50 INFO] Starting acquisition
[Status 16:45:50 INFO] reading housekeeping
[Status 16:46:07 INFO] acquire complete
[Status 16:46:09 INFO] writing housekeeping
[Sequencer 16:46:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:46:09 INFO] incremented U scene to 301 completed views
[Sequencer 16:46:09 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:46:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:46:09 INFO] incremented to [AERI set: name V301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:46:09 INFO] U301.SIG(18)
[sigmove 16:46:09 DEBUG] transformed U301Ma.SPC -> U301MA.SPC
[sigmove 16:46:09 DEBUG] transformed U301Mb.SPC -> U301MB.SPC
[sigmove 16:46:09 DEBUG] transformed U301Mc.SPC -> U301MC.SPC
[sigmove 16:46:09 DEBUG] transformed U301Md.SPC -> U301MD.SPC
[sigmove 16:46:09 DEBUG] transformed U301Me.SPC -> U301ME.SPC
[sigmove 16:46:09 DEBUG] transformed U301Mf.SPC -> U301MF.SPC
[Status 16:46:09 INFO] data for U301 transferred to science data processing
[Tidy 16:46:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:46:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:46:09 INFO] resetting WatchDogTimer
[Status 16:46:09 INFO] Starting Set [AERI set: name V301, 6 scans, 0 angle, D16300 command]
[Ingest 16:46:09 INFO] Sending XML status message
[Status 16:46:09 INFO] Mirror angle: 0
[Mirror 16:46:09 INFO] rotating to position V
[Status 16:46:10 INFO] .SET file for ACQ96 ready
[Ingest 16:46:10 INFO] Starting acquisition
[Status 16:46:11 INFO] reading housekeeping
[Status 16:46:29 INFO] acquire complete
[Status 16:46:30 INFO] writing housekeeping
[Sequencer 16:46:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:46:30 INFO] incremented V scene to 301 completed views
[Sequencer 16:46:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:46:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:46:30 INFO] incremented to [AERI set: name W301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:46:30 INFO] V301.SIG(18)
[sigmove 16:46:30 DEBUG] transformed V301Ma.SPC -> V301MA.SPC
[sigmove 16:46:30 DEBUG] transformed V301Mb.SPC -> V301MB.SPC
[sigmove 16:46:30 DEBUG] transformed V301Mc.SPC -> V301MC.SPC
[sigmove 16:46:30 DEBUG] transformed V301Md.SPC -> V301MD.SPC
[sigmove 16:46:30 DEBUG] transformed V301Me.SPC -> V301ME.SPC
[sigmove 16:46:30 DEBUG] transformed V301Mf.SPC -> V301MF.SPC
[Status 16:46:30 INFO] data for V301 transferred to science data processing
[Tidy 16:46:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:46:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:46:30 INFO] resetting WatchDogTimer
[Status 16:46:30 INFO] Starting Set [AERI set: name W301, 6 scans, 0 angle, D16300 command]
[Ingest 16:46:30 INFO] Sending XML status message
[Status 16:46:30 INFO] Mirror angle: 0
[Mirror 16:46:31 INFO] rotating to position W
[Status 16:46:31 INFO] .SET file for ACQ96 ready
[Ingest 16:46:31 INFO] Starting acquisition
[Status 16:46:32 INFO] reading housekeeping
[Status 16:46:49 INFO] acquire complete
[Status 16:46:50 INFO] writing housekeeping
[Sequencer 16:46:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:46:50 INFO] incremented W scene to 301 completed views
[Sequencer 16:46:50 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:46:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:46:50 INFO] incremented to [AERI set: name X301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:46:50 INFO] W301.SIG(18)
[sigmove 16:46:50 DEBUG] transformed W301Ma.SPC -> W301MA.SPC
[sigmove 16:46:50 DEBUG] transformed W301Mb.SPC -> W301MB.SPC
[sigmove 16:46:50 DEBUG] transformed W301Mc.SPC -> W301MC.SPC
[sigmove 16:46:50 DEBUG] transformed W301Md.SPC -> W301MD.SPC
[sigmove 16:46:50 DEBUG] transformed W301Me.SPC -> W301ME.SPC
[sigmove 16:46:50 DEBUG] transformed W301Mf.SPC -> W301MF.SPC
[Status 16:46:50 INFO] data for W301 transferred to science data processing
[Tidy 16:46:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:46:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:46:50 INFO] resetting WatchDogTimer
[Status 16:46:50 INFO] Starting Set [AERI set: name X301, 6 scans, 0 angle, D16300 command]
[Ingest 16:46:50 INFO] Sending XML status message
[Status 16:46:50 INFO] Mirror angle: 0
[Mirror 16:46:51 INFO] rotating to position X
[Status 16:46:51 INFO] .SET file for ACQ96 ready
[Ingest 16:46:52 INFO] Starting acquisition
[Status 16:46:52 INFO] reading housekeeping
[Status 16:47:09 INFO] acquire complete
[Status 16:47:10 INFO] writing housekeeping
[Sequencer 16:47:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:47:10 INFO] incremented X scene to 301 completed views
[Sequencer 16:47:10 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:47:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:47:10 INFO] incremented to [AERI set: name Y301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:47:10 INFO] X301.SIG(18)
[sigmove 16:47:10 DEBUG] transformed X301Ma.SPC -> X301MA.SPC
[sigmove 16:47:10 DEBUG] transformed X301Mb.SPC -> X301MB.SPC
[sigmove 16:47:10 DEBUG] transformed X301Mc.SPC -> X301MC.SPC
[sigmove 16:47:10 DEBUG] transformed X301Md.SPC -> X301MD.SPC
[sigmove 16:47:10 DEBUG] transformed X301Me.SPC -> X301ME.SPC
[sigmove 16:47:10 DEBUG] transformed X301Mf.SPC -> X301MF.SPC
[Status 16:47:10 INFO] data for X301 transferred to science data processing
[Tidy 16:47:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:47:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:47:10 INFO] resetting WatchDogTimer
[Status 16:47:11 INFO] Starting Set [AERI set: name Y301, 6 scans, 0 angle, D16300 command]
[Ingest 16:47:11 INFO] Sending XML status message
[Status 16:47:11 INFO] Mirror angle: 0
[Mirror 16:47:11 INFO] rotating to position Y
[Status 16:47:12 INFO] .SET file for ACQ96 ready
[Ingest 16:47:12 INFO] Starting acquisition
[Status 16:47:12 INFO] reading housekeeping
[Status 16:47:29 INFO] acquire complete
[Status 16:47:30 INFO] writing housekeeping
[Sequencer 16:47:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:47:30 INFO] incremented Y scene to 301 completed views
[Sequencer 16:47:30 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:47:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:47:30 INFO] incremented to [AERI set: name Z301, 6 scans, 0 angle, D16300 command] set
[sigmove 16:47:30 INFO] Y301.SIG(18)
[sigmove 16:47:30 DEBUG] transformed Y301Ma.SPC -> Y301MA.SPC
[sigmove 16:47:30 DEBUG] transformed Y301Mb.SPC -> Y301MB.SPC
[sigmove 16:47:30 DEBUG] transformed Y301Mc.SPC -> Y301MC.SPC
[sigmove 16:47:30 DEBUG] transformed Y301Md.SPC -> Y301MD.SPC
[sigmove 16:47:30 DEBUG] transformed Y301Me.SPC -> Y301ME.SPC
[sigmove 16:47:30 DEBUG] transformed Y301Mf.SPC -> Y301MF.SPC
[Status 16:47:30 INFO] data for Y301 transferred to science data processing
[Tidy 16:47:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:47:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:47:30 INFO] resetting WatchDogTimer
[Status 16:47:31 INFO] Starting Set [AERI set: name Z301, 6 scans, 0 angle, D16300 command]
[Ingest 16:47:31 INFO] Sending XML status message
[Status 16:47:31 INFO] Mirror angle: 0
[Mirror 16:47:31 INFO] rotating to position Z
[Status 16:47:32 INFO] .SET file for ACQ96 ready
[Ingest 16:47:32 INFO] Starting acquisition
[Status 16:47:32 INFO] reading housekeeping
[Status 16:47:50 INFO] acquire complete
[Status 16:47:51 INFO] writing housekeeping
[Sequencer 16:47:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:47:51 INFO] incremented Z scene to 301 completed views
[Sequencer 16:47:51 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:47:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:47:51 INFO] incremented to [AERI set: name A302, 6 scans, 120 angle, D28300 command] set
[sigmove 16:47:51 INFO] Z301.SIG(18)
[sigmove 16:47:51 DEBUG] transformed Z301Ma.SPC -> Z301MA.SPC
[sigmove 16:47:51 DEBUG] transformed Z301Mb.SPC -> Z301MB.SPC
[sigmove 16:47:51 DEBUG] transformed Z301Mc.SPC -> Z301MC.SPC
[sigmove 16:47:51 DEBUG] transformed Z301Md.SPC -> Z301MD.SPC
[sigmove 16:47:51 DEBUG] transformed Z301Me.SPC -> Z301ME.SPC
[sigmove 16:47:51 DEBUG] transformed Z301Mf.SPC -> Z301MF.SPC
[Status 16:47:51 INFO] data for Z301 transferred to science data processing
[Tidy 16:47:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:47:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:47:51 INFO] resetting WatchDogTimer
[Status 16:47:51 INFO] Starting Set [AERI set: name A302, 6 scans, 120 angle, D28300 command]
[Ingest 16:47:51 INFO] Sending XML status message
[Status 16:47:51 INFO] Mirror angle: 120
[Mirror 16:47:51 INFO] rotating to position A
[Status 16:47:53 INFO] .SET file for ACQ96 ready
[Ingest 16:47:53 INFO] Starting acquisition
[Status 16:47:54 INFO] reading housekeeping
[Status 16:48:11 INFO] acquire complete
[Status 16:48:12 INFO] writing housekeeping
[Sequencer 16:48:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:48:12 INFO] incremented A scene to 302 completed views
[Sequencer 16:48:12 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:48:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:48:12 INFO] incremented to [AERI set: name H302, 6 scans, 60 angle, D22500 command] set
[sigmove 16:48:12 INFO] A302.SIG(18)
[sigmove 16:48:12 DEBUG] transformed A302Ma.SPC -> A302MA.SPC
[sigmove 16:48:12 DEBUG] transformed A302Mb.SPC -> A302MB.SPC
[sigmove 16:48:12 DEBUG] transformed A302Mc.SPC -> A302MC.SPC
[sigmove 16:48:12 DEBUG] transformed A302Md.SPC -> A302MD.SPC
[sigmove 16:48:12 DEBUG] transformed A302Me.SPC -> A302ME.SPC
[sigmove 16:48:12 DEBUG] transformed A302Mf.SPC -> A302MF.SPC
[Status 16:48:12 INFO] data for A302 transferred to science data processing
[Tidy 16:48:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:48:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:48:12 INFO] resetting WatchDogTimer
[Status 16:48:12 INFO] Starting Set [AERI set: name H302, 6 scans, 60 angle, D22500 command]
[Ingest 16:48:12 INFO] Sending XML status message
[Status 16:48:12 INFO] Mirror angle: 60
[Mirror 16:48:13 INFO] rotating to position H
[Status 16:48:14 INFO] .SET file for ACQ96 ready
[Ingest 16:48:14 INFO] Starting acquisition
[Status 16:48:15 INFO] reading housekeeping
[Status 16:48:32 INFO] acquire complete
[Status 16:48:33 INFO] writing housekeeping
[Sequencer 16:48:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:48:33 INFO] incremented H scene to 302 completed views
[Sequencer 16:48:33 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:48:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:48:33 INFO] incremented to [AERI set: name S302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:48:33 INFO] H302.SIG(18)
[sigmove 16:48:33 DEBUG] transformed H302Ma.SPC -> H302MA.SPC
[sigmove 16:48:33 DEBUG] transformed H302Mb.SPC -> H302MB.SPC
[sigmove 16:48:33 DEBUG] transformed H302Mc.SPC -> H302MC.SPC
[sigmove 16:48:33 DEBUG] transformed H302Md.SPC -> H302MD.SPC
[sigmove 16:48:33 DEBUG] transformed H302Me.SPC -> H302ME.SPC
[sigmove 16:48:33 DEBUG] transformed H302Mf.SPC -> H302MF.SPC
[Status 16:48:33 INFO] data for H302 transferred to science data processing
[Tidy 16:48:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:48:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:48:33 INFO] resetting WatchDogTimer
[Status 16:48:34 INFO] Starting Set [AERI set: name S302, 6 scans, 0 angle, D16300 command]
[Ingest 16:48:34 INFO] Sending XML status message
[Status 16:48:34 INFO] Mirror angle: 0
[Mirror 16:48:34 INFO] rotating to position S
[Status 16:48:35 INFO] .SET file for ACQ96 ready
[Ingest 16:48:35 INFO] Starting acquisition
[Status 16:48:36 INFO] reading housekeeping
[Status 16:48:54 INFO] acquire complete
[Status 16:48:55 INFO] writing housekeeping
[Sequencer 16:48:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:48:55 INFO] incremented S scene to 302 completed views
[Sequencer 16:48:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:48:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:48:55 INFO] incremented to [AERI set: name T302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:48:55 INFO] S302.SIG(18)
[sigmove 16:48:55 DEBUG] transformed S302Ma.SPC -> S302MA.SPC
[sigmove 16:48:55 DEBUG] transformed S302Mb.SPC -> S302MB.SPC
[sigmove 16:48:55 DEBUG] transformed S302Mc.SPC -> S302MC.SPC
[sigmove 16:48:55 DEBUG] transformed S302Md.SPC -> S302MD.SPC
[sigmove 16:48:55 DEBUG] transformed S302Me.SPC -> S302ME.SPC
[sigmove 16:48:55 DEBUG] transformed S302Mf.SPC -> S302MF.SPC
[Status 16:48:55 INFO] data for S302 transferred to science data processing
[Tidy 16:48:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:48:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:48:55 INFO] resetting WatchDogTimer
[Status 16:48:55 INFO] Starting Set [AERI set: name T302, 6 scans, 0 angle, D16300 command]
[Ingest 16:48:55 INFO] Sending XML status message
[Status 16:48:55 INFO] Mirror angle: 0
[Mirror 16:48:55 INFO] rotating to position T
[Status 16:48:56 INFO] .SET file for ACQ96 ready
[Ingest 16:48:56 INFO] Starting acquisition
[Status 16:48:57 INFO] reading housekeeping
[Status 16:49:15 INFO] acquire complete
[Status 16:49:16 INFO] writing housekeeping
[Sequencer 16:49:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:49:16 INFO] incremented T scene to 302 completed views
[Sequencer 16:49:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:49:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:49:16 INFO] incremented to [AERI set: name U302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:49:16 INFO] T302.SIG(18)
[sigmove 16:49:16 DEBUG] transformed T302Ma.SPC -> T302MA.SPC
[sigmove 16:49:16 DEBUG] transformed T302Mb.SPC -> T302MB.SPC
[sigmove 16:49:16 DEBUG] transformed T302Mc.SPC -> T302MC.SPC
[sigmove 16:49:16 DEBUG] transformed T302Md.SPC -> T302MD.SPC
[sigmove 16:49:16 DEBUG] transformed T302Me.SPC -> T302ME.SPC
[sigmove 16:49:16 DEBUG] transformed T302Mf.SPC -> T302MF.SPC
[Status 16:49:16 INFO] data for T302 transferred to science data processing
[Tidy 16:49:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:49:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:49:16 INFO] resetting WatchDogTimer
[Status 16:49:16 INFO] Starting Set [AERI set: name U302, 6 scans, 0 angle, D16300 command]
[Ingest 16:49:16 INFO] Sending XML status message
[Status 16:49:16 INFO] Mirror angle: 0
[Mirror 16:49:17 INFO] rotating to position U
[Status 16:49:17 INFO] .SET file for ACQ96 ready
[Ingest 16:49:17 INFO] Starting acquisition
[Status 16:49:18 INFO] reading housekeeping
[Status 16:49:36 INFO] acquire complete
[Status 16:49:37 INFO] writing housekeeping
[Sequencer 16:49:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:49:37 INFO] incremented U scene to 302 completed views
[Sequencer 16:49:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:49:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:49:37 INFO] incremented to [AERI set: name V302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:49:37 INFO] U302.SIG(18)
[sigmove 16:49:37 DEBUG] transformed U302Ma.SPC -> U302MA.SPC
[sigmove 16:49:37 DEBUG] transformed U302Mb.SPC -> U302MB.SPC
[sigmove 16:49:37 DEBUG] transformed U302Mc.SPC -> U302MC.SPC
[sigmove 16:49:37 DEBUG] transformed U302Md.SPC -> U302MD.SPC
[sigmove 16:49:37 DEBUG] transformed U302Me.SPC -> U302ME.SPC
[sigmove 16:49:37 DEBUG] transformed U302Mf.SPC -> U302MF.SPC
[Status 16:49:37 INFO] data for U302 transferred to science data processing
[Tidy 16:49:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:49:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:49:37 INFO] resetting WatchDogTimer
[Status 16:49:38 INFO] Starting Set [AERI set: name V302, 6 scans, 0 angle, D16300 command]
[Ingest 16:49:38 INFO] Sending XML status message
[Status 16:49:38 INFO] Mirror angle: 0
[Mirror 16:49:38 INFO] rotating to position V
[Status 16:49:38 INFO] .SET file for ACQ96 ready
[Ingest 16:49:39 INFO] Starting acquisition
[Status 16:49:39 INFO] reading housekeeping
[Status 16:49:56 INFO] acquire complete
[Status 16:49:57 INFO] writing housekeeping
[Sequencer 16:49:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:49:57 INFO] incremented V scene to 302 completed views
[Sequencer 16:49:57 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:49:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:49:57 INFO] incremented to [AERI set: name W302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:49:57 INFO] V302.SIG(18)
[sigmove 16:49:57 DEBUG] transformed V302Ma.SPC -> V302MA.SPC
[sigmove 16:49:57 DEBUG] transformed V302Mb.SPC -> V302MB.SPC
[sigmove 16:49:57 DEBUG] transformed V302Mc.SPC -> V302MC.SPC
[sigmove 16:49:57 DEBUG] transformed V302Md.SPC -> V302MD.SPC
[sigmove 16:49:57 DEBUG] transformed V302Me.SPC -> V302ME.SPC
[sigmove 16:49:57 DEBUG] transformed V302Mf.SPC -> V302MF.SPC
[Status 16:49:57 INFO] data for V302 transferred to science data processing
[Tidy 16:49:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:49:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:49:57 INFO] resetting WatchDogTimer
[Status 16:49:58 INFO] Starting Set [AERI set: name W302, 6 scans, 0 angle, D16300 command]
[Ingest 16:49:58 INFO] Sending XML status message
[Status 16:49:58 INFO] Mirror angle: 0
[Mirror 16:49:58 INFO] rotating to position W
[Status 16:49:59 INFO] .SET file for ACQ96 ready
[Ingest 16:49:59 INFO] Starting acquisition
[Status 16:49:59 INFO] reading housekeeping
[Status 16:50:17 INFO] acquire complete
[Status 16:50:18 INFO] writing housekeeping
[Sequencer 16:50:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:50:18 INFO] incremented W scene to 302 completed views
[Sequencer 16:50:18 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:50:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:50:18 INFO] incremented to [AERI set: name X302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:50:18 INFO] W302.SIG(18)
[sigmove 16:50:18 DEBUG] transformed W302Ma.SPC -> W302MA.SPC
[sigmove 16:50:18 DEBUG] transformed W302Mb.SPC -> W302MB.SPC
[sigmove 16:50:18 DEBUG] transformed W302Mc.SPC -> W302MC.SPC
[sigmove 16:50:18 DEBUG] transformed W302Md.SPC -> W302MD.SPC
[sigmove 16:50:18 DEBUG] transformed W302Me.SPC -> W302ME.SPC
[sigmove 16:50:18 DEBUG] transformed W302Mf.SPC -> W302MF.SPC
[Status 16:50:18 INFO] data for W302 transferred to science data processing
[Tidy 16:50:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:50:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:50:18 INFO] resetting WatchDogTimer
[Status 16:50:18 INFO] Starting Set [AERI set: name X302, 6 scans, 0 angle, D16300 command]
[Ingest 16:50:18 INFO] Sending XML status message
[Status 16:50:18 INFO] Mirror angle: 0
[Mirror 16:50:18 INFO] rotating to position X
[Status 16:50:19 INFO] .SET file for ACQ96 ready
[Ingest 16:50:19 INFO] Starting acquisition
[Status 16:50:20 INFO] reading housekeeping
[Status 16:50:38 INFO] acquire complete
[Status 16:50:39 INFO] writing housekeeping
[Sequencer 16:50:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:50:39 INFO] incremented X scene to 302 completed views
[Sequencer 16:50:39 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:50:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:50:39 INFO] incremented to [AERI set: name Y302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:50:39 INFO] X302.SIG(18)
[sigmove 16:50:39 DEBUG] transformed X302Ma.SPC -> X302MA.SPC
[sigmove 16:50:39 DEBUG] transformed X302Mb.SPC -> X302MB.SPC
[sigmove 16:50:39 DEBUG] transformed X302Mc.SPC -> X302MC.SPC
[sigmove 16:50:39 DEBUG] transformed X302Md.SPC -> X302MD.SPC
[sigmove 16:50:39 DEBUG] transformed X302Me.SPC -> X302ME.SPC
[sigmove 16:50:39 DEBUG] transformed X302Mf.SPC -> X302MF.SPC
[Status 16:50:39 INFO] data for X302 transferred to science data processing
[Tidy 16:50:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:50:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:50:39 INFO] resetting WatchDogTimer
[Status 16:50:39 INFO] Starting Set [AERI set: name Y302, 6 scans, 0 angle, D16300 command]
[Ingest 16:50:39 INFO] Sending XML status message
[Status 16:50:39 INFO] Mirror angle: 0
[Mirror 16:50:40 INFO] rotating to position Y
[Status 16:50:40 INFO] .SET file for ACQ96 ready
[Ingest 16:50:40 INFO] Starting acquisition
[Status 16:50:41 INFO] reading housekeeping
[Status 16:50:58 INFO] acquire complete
[Status 16:50:59 INFO] writing housekeeping
[Sequencer 16:50:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:50:59 INFO] incremented Y scene to 302 completed views
[Sequencer 16:50:59 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:50:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:50:59 INFO] incremented to [AERI set: name Z302, 6 scans, 0 angle, D16300 command] set
[sigmove 16:50:59 INFO] Y302.SIG(18)
[sigmove 16:50:59 DEBUG] transformed Y302Ma.SPC -> Y302MA.SPC
[sigmove 16:50:59 DEBUG] transformed Y302Mb.SPC -> Y302MB.SPC
[sigmove 16:50:59 DEBUG] transformed Y302Mc.SPC -> Y302MC.SPC
[sigmove 16:50:59 DEBUG] transformed Y302Md.SPC -> Y302MD.SPC
[sigmove 16:50:59 DEBUG] transformed Y302Me.SPC -> Y302ME.SPC
[sigmove 16:50:59 DEBUG] transformed Y302Mf.SPC -> Y302MF.SPC
[Status 16:50:59 INFO] data for Y302 transferred to science data processing
[Tidy 16:50:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:50:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:50:59 INFO] resetting WatchDogTimer
[Status 16:50:59 INFO] Starting Set [AERI set: name Z302, 6 scans, 0 angle, D16300 command]
[Ingest 16:50:59 INFO] Sending XML status message
[Status 16:50:59 INFO] Mirror angle: 0
[Mirror 16:51:00 INFO] rotating to position Z
[Status 16:51:01 INFO] .SET file for ACQ96 ready
[Ingest 16:51:02 INFO] Starting acquisition
[Status 16:51:03 INFO] reading housekeeping
[Status 16:51:20 INFO] acquire complete
[Status 16:51:21 INFO] writing housekeeping
[Sequencer 16:51:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:51:21 INFO] incremented Z scene to 302 completed views
[Sequencer 16:51:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:51:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:51:21 INFO] incremented to [AERI set: name H303, 6 scans, 60 angle, D22500 command] set
[sigmove 16:51:21 INFO] Z302.SIG(18)
[sigmove 16:51:21 DEBUG] transformed Z302Ma.SPC -> Z302MA.SPC
[sigmove 16:51:21 DEBUG] transformed Z302Mb.SPC -> Z302MB.SPC
[sigmove 16:51:21 DEBUG] transformed Z302Mc.SPC -> Z302MC.SPC
[sigmove 16:51:21 DEBUG] transformed Z302Md.SPC -> Z302MD.SPC
[sigmove 16:51:21 DEBUG] transformed Z302Me.SPC -> Z302ME.SPC
[sigmove 16:51:21 DEBUG] transformed Z302Mf.SPC -> Z302MF.SPC
[Status 16:51:21 INFO] data for Z302 transferred to science data processing
[Tidy 16:51:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:51:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:51:21 INFO] resetting WatchDogTimer
[Status 16:51:22 INFO] Starting Set [AERI set: name H303, 6 scans, 60 angle, D22500 command]
[Ingest 16:51:22 INFO] Sending XML status message
[Status 16:51:22 INFO] Mirror angle: 60
[Mirror 16:51:22 INFO] rotating to position H
[Status 16:51:23 INFO] .SET file for ACQ96 ready
[Ingest 16:51:24 INFO] Starting acquisition
[Status 16:51:24 INFO] reading housekeeping
[Status 16:51:42 INFO] acquire complete
[Status 16:51:43 INFO] writing housekeeping
[Sequencer 16:51:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:51:43 INFO] incremented H scene to 303 completed views
[Sequencer 16:51:43 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:51:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:51:43 INFO] incremented to [AERI set: name A303, 6 scans, 120 angle, D28300 command] set
[sigmove 16:51:43 INFO] H303.SIG(18)
[sigmove 16:51:43 DEBUG] transformed H303Ma.SPC -> H303MA.SPC
[sigmove 16:51:43 DEBUG] transformed H303Mb.SPC -> H303MB.SPC
[sigmove 16:51:43 DEBUG] transformed H303Mc.SPC -> H303MC.SPC
[sigmove 16:51:43 DEBUG] transformed H303Md.SPC -> H303MD.SPC
[sigmove 16:51:43 DEBUG] transformed H303Me.SPC -> H303ME.SPC
[sigmove 16:51:43 DEBUG] transformed H303Mf.SPC -> H303MF.SPC
[Status 16:51:43 INFO] data for H303 transferred to science data processing
[Tidy 16:51:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:51:43 INFO] A301.FIN(19),H301.FIN(19),S301.FIN(19),T301.FIN(19),U301.FIN(19),V301.FIN(19),W301.FIN(19),X301.FIN(19),Y301.FIN(19),Z301.FIN(19),A302.FIN(19),H302.FIN(19),S302.FIN(19),T302.FIN(19),U302.FIN(19),V302.FIN(19),W302.FIN(19),X302.FIN(19),Y302.FIN(19),Z302.FIN(19)
[sigmove 16:51:43 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:51:43 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:51:48 DEBUG] done zipping
[WatchDog 16:51:48 INFO] resetting WatchDogTimer
[Status 16:51:49 INFO] Starting Set [AERI set: name A303, 6 scans, 120 angle, D28300 command]
[Ingest 16:51:49 INFO] Sending XML status message
[Status 16:51:49 INFO] Mirror angle: 120
[Mirror 16:51:49 INFO] rotating to position A
[Status 16:51:50 INFO] .SET file for ACQ96 ready
[Ingest 16:51:51 INFO] Starting acquisition
[Status 16:51:51 INFO] reading housekeeping
[Status 16:52:09 INFO] acquire complete
[Status 16:52:10 INFO] writing housekeeping
[Sequencer 16:52:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:52:10 INFO] incremented A scene to 303 completed views
[Sequencer 16:52:10 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:52:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:52:10 INFO] incremented to [AERI set: name S303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:52:10 INFO] A303.SIG(18)
[sigmove 16:52:10 DEBUG] transformed A303Ma.SPC -> A303MA.SPC
[sigmove 16:52:10 DEBUG] transformed A303Mb.SPC -> A303MB.SPC
[sigmove 16:52:10 DEBUG] transformed A303Mc.SPC -> A303MC.SPC
[sigmove 16:52:10 DEBUG] transformed A303Md.SPC -> A303MD.SPC
[sigmove 16:52:10 DEBUG] transformed A303Me.SPC -> A303ME.SPC
[sigmove 16:52:10 DEBUG] transformed A303Mf.SPC -> A303MF.SPC
[Status 16:52:10 INFO] data for A303 transferred to science data processing
[Tidy 16:52:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:52:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:52:10 INFO] resetting WatchDogTimer
[Status 16:52:10 INFO] Starting Set [AERI set: name S303, 6 scans, 0 angle, D16300 command]
[Ingest 16:52:10 INFO] Sending XML status message
[Status 16:52:10 INFO] Mirror angle: 0
[Mirror 16:52:10 INFO] rotating to position S
[Status 16:52:12 INFO] .SET file for ACQ96 ready
[Ingest 16:52:12 INFO] Starting acquisition
[Status 16:52:13 INFO] reading housekeeping
[Status 16:52:30 INFO] acquire complete
[Status 16:52:31 INFO] writing housekeeping
[Sequencer 16:52:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:52:31 INFO] incremented S scene to 303 completed views
[Sequencer 16:52:31 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:52:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:52:31 INFO] incremented to [AERI set: name T303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:52:31 INFO] S303.SIG(18)
[sigmove 16:52:31 DEBUG] transformed S303Ma.SPC -> S303MA.SPC
[sigmove 16:52:31 DEBUG] transformed S303Mb.SPC -> S303MB.SPC
[sigmove 16:52:31 DEBUG] transformed S303Mc.SPC -> S303MC.SPC
[sigmove 16:52:31 DEBUG] transformed S303Md.SPC -> S303MD.SPC
[sigmove 16:52:31 DEBUG] transformed S303Me.SPC -> S303ME.SPC
[sigmove 16:52:31 DEBUG] transformed S303Mf.SPC -> S303MF.SPC
[Status 16:52:31 INFO] data for S303 transferred to science data processing
[Tidy 16:52:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:52:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:52:31 INFO] resetting WatchDogTimer
[Status 16:52:31 INFO] Starting Set [AERI set: name T303, 6 scans, 0 angle, D16300 command]
[Ingest 16:52:31 INFO] Sending XML status message
[Status 16:52:31 INFO] Mirror angle: 0
[Mirror 16:52:32 INFO] rotating to position T
[Status 16:52:32 INFO] .SET file for ACQ96 ready
[Ingest 16:52:33 INFO] Starting acquisition
[Status 16:52:33 INFO] reading housekeeping
[Status 16:52:51 INFO] acquire complete
[Status 16:52:52 INFO] writing housekeeping
[Sequencer 16:52:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:52:52 INFO] incremented T scene to 303 completed views
[Sequencer 16:52:52 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:52:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:52:52 INFO] incremented to [AERI set: name U303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:52:52 INFO] T303.SIG(18)
[sigmove 16:52:52 DEBUG] transformed T303Ma.SPC -> T303MA.SPC
[sigmove 16:52:52 DEBUG] transformed T303Mb.SPC -> T303MB.SPC
[sigmove 16:52:52 DEBUG] transformed T303Mc.SPC -> T303MC.SPC
[sigmove 16:52:52 DEBUG] transformed T303Md.SPC -> T303MD.SPC
[sigmove 16:52:52 DEBUG] transformed T303Me.SPC -> T303ME.SPC
[sigmove 16:52:52 DEBUG] transformed T303Mf.SPC -> T303MF.SPC
[Status 16:52:52 INFO] data for T303 transferred to science data processing
[Tidy 16:52:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:52:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:52:52 INFO] resetting WatchDogTimer
[Status 16:52:53 INFO] Starting Set [AERI set: name U303, 6 scans, 0 angle, D16300 command]
[Ingest 16:52:53 INFO] Sending XML status message
[Status 16:52:53 INFO] Mirror angle: 0
[Mirror 16:52:53 INFO] rotating to position U
[Status 16:52:54 INFO] .SET file for ACQ96 ready
[Ingest 16:52:54 INFO] Starting acquisition
[Status 16:52:54 INFO] reading housekeeping
[Status 16:53:13 INFO] acquire complete
[Status 16:53:14 INFO] writing housekeeping
[Sequencer 16:53:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:53:14 INFO] incremented U scene to 303 completed views
[Sequencer 16:53:14 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:53:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:53:14 INFO] incremented to [AERI set: name V303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:53:14 INFO] U303.SIG(18)
[sigmove 16:53:14 DEBUG] transformed U303Ma.SPC -> U303MA.SPC
[sigmove 16:53:14 DEBUG] transformed U303Mb.SPC -> U303MB.SPC
[sigmove 16:53:14 DEBUG] transformed U303Mc.SPC -> U303MC.SPC
[sigmove 16:53:14 DEBUG] transformed U303Md.SPC -> U303MD.SPC
[sigmove 16:53:14 DEBUG] transformed U303Me.SPC -> U303ME.SPC
[sigmove 16:53:14 DEBUG] transformed U303Mf.SPC -> U303MF.SPC
[Status 16:53:14 INFO] data for U303 transferred to science data processing
[Tidy 16:53:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:53:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:53:14 INFO] resetting WatchDogTimer
[Status 16:53:14 INFO] Starting Set [AERI set: name V303, 6 scans, 0 angle, D16300 command]
[Ingest 16:53:14 INFO] Sending XML status message
[Status 16:53:14 INFO] Mirror angle: 0
[Mirror 16:53:14 INFO] rotating to position V
[Status 16:53:15 INFO] .SET file for ACQ96 ready
[Ingest 16:53:15 INFO] Starting acquisition
[Status 16:53:16 INFO] reading housekeeping
[Status 16:53:33 INFO] acquire complete
[Status 16:53:34 INFO] writing housekeeping
[Sequencer 16:53:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:53:34 INFO] incremented V scene to 303 completed views
[Sequencer 16:53:34 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:53:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:53:34 INFO] incremented to [AERI set: name W303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:53:34 INFO] V303.SIG(18)
[sigmove 16:53:34 DEBUG] transformed V303Ma.SPC -> V303MA.SPC
[sigmove 16:53:34 DEBUG] transformed V303Mb.SPC -> V303MB.SPC
[sigmove 16:53:34 DEBUG] transformed V303Mc.SPC -> V303MC.SPC
[sigmove 16:53:34 DEBUG] transformed V303Md.SPC -> V303MD.SPC
[sigmove 16:53:34 DEBUG] transformed V303Me.SPC -> V303ME.SPC
[sigmove 16:53:34 DEBUG] transformed V303Mf.SPC -> V303MF.SPC
[Status 16:53:34 INFO] data for V303 transferred to science data processing
[Tidy 16:53:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:53:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:53:34 INFO] resetting WatchDogTimer
[Status 16:53:34 INFO] Starting Set [AERI set: name W303, 6 scans, 0 angle, D16300 command]
[Ingest 16:53:34 INFO] Sending XML status message
[Status 16:53:34 INFO] Mirror angle: 0
[Mirror 16:53:35 INFO] rotating to position W
[Status 16:53:35 INFO] .SET file for ACQ96 ready
[Ingest 16:53:35 INFO] Starting acquisition
[Status 16:53:36 INFO] reading housekeeping
[Status 16:53:53 INFO] acquire complete
[Status 16:53:54 INFO] writing housekeeping
[Sequencer 16:53:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:53:54 INFO] incremented W scene to 303 completed views
[Sequencer 16:53:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:53:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:53:54 INFO] incremented to [AERI set: name X303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:53:54 INFO] W303.SIG(18)
[sigmove 16:53:54 DEBUG] transformed W303Ma.SPC -> W303MA.SPC
[sigmove 16:53:54 DEBUG] transformed W303Mb.SPC -> W303MB.SPC
[sigmove 16:53:54 DEBUG] transformed W303Mc.SPC -> W303MC.SPC
[sigmove 16:53:54 DEBUG] transformed W303Md.SPC -> W303MD.SPC
[sigmove 16:53:54 DEBUG] transformed W303Me.SPC -> W303ME.SPC
[sigmove 16:53:54 DEBUG] transformed W303Mf.SPC -> W303MF.SPC
[Status 16:53:54 INFO] data for W303 transferred to science data processing
[Tidy 16:53:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:53:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:53:54 INFO] resetting WatchDogTimer
[Status 16:53:54 INFO] Starting Set [AERI set: name X303, 6 scans, 0 angle, D16300 command]
[Ingest 16:53:54 INFO] Sending XML status message
[Status 16:53:54 INFO] Mirror angle: 0
[Mirror 16:53:55 INFO] rotating to position X
[Status 16:53:55 INFO] .SET file for ACQ96 ready
[Ingest 16:53:56 INFO] Starting acquisition
[Status 16:53:56 INFO] reading housekeeping
[Status 16:54:13 INFO] acquire complete
[Status 16:54:14 INFO] writing housekeeping
[Sequencer 16:54:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:54:14 INFO] incremented X scene to 303 completed views
[Sequencer 16:54:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:54:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:54:14 INFO] incremented to [AERI set: name Y303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:54:14 INFO] X303.SIG(18)
[sigmove 16:54:14 DEBUG] transformed X303Ma.SPC -> X303MA.SPC
[sigmove 16:54:14 DEBUG] transformed X303Mb.SPC -> X303MB.SPC
[sigmove 16:54:14 DEBUG] transformed X303Mc.SPC -> X303MC.SPC
[sigmove 16:54:14 DEBUG] transformed X303Md.SPC -> X303MD.SPC
[sigmove 16:54:14 DEBUG] transformed X303Me.SPC -> X303ME.SPC
[sigmove 16:54:14 DEBUG] transformed X303Mf.SPC -> X303MF.SPC
[Status 16:54:14 INFO] data for X303 transferred to science data processing
[Tidy 16:54:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:54:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:54:14 INFO] resetting WatchDogTimer
[Status 16:54:15 INFO] Starting Set [AERI set: name Y303, 6 scans, 0 angle, D16300 command]
[Ingest 16:54:15 INFO] Sending XML status message
[Status 16:54:15 INFO] Mirror angle: 0
[Mirror 16:54:15 INFO] rotating to position Y
[Status 16:54:16 INFO] .SET file for ACQ96 ready
[Ingest 16:54:16 INFO] Starting acquisition
[Status 16:54:16 INFO] reading housekeeping
[Status 16:54:33 INFO] acquire complete
[Status 16:54:34 INFO] writing housekeeping
[Sequencer 16:54:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:54:34 INFO] incremented Y scene to 303 completed views
[Sequencer 16:54:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:54:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:54:34 INFO] incremented to [AERI set: name Z303, 6 scans, 0 angle, D16300 command] set
[sigmove 16:54:34 INFO] Y303.SIG(18)
[sigmove 16:54:34 DEBUG] transformed Y303Ma.SPC -> Y303MA.SPC
[sigmove 16:54:34 DEBUG] transformed Y303Mb.SPC -> Y303MB.SPC
[sigmove 16:54:34 DEBUG] transformed Y303Mc.SPC -> Y303MC.SPC
[sigmove 16:54:34 DEBUG] transformed Y303Md.SPC -> Y303MD.SPC
[sigmove 16:54:34 DEBUG] transformed Y303Me.SPC -> Y303ME.SPC
[sigmove 16:54:34 DEBUG] transformed Y303Mf.SPC -> Y303MF.SPC
[Status 16:54:34 INFO] data for Y303 transferred to science data processing
[Tidy 16:54:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:54:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:54:34 INFO] resetting WatchDogTimer
[Status 16:54:35 INFO] Starting Set [AERI set: name Z303, 6 scans, 0 angle, D16300 command]
[Ingest 16:54:35 INFO] Sending XML status message
[Status 16:54:35 INFO] Mirror angle: 0
[Mirror 16:54:35 INFO] rotating to position Z
[Status 16:54:36 INFO] .SET file for ACQ96 ready
[Ingest 16:54:36 INFO] Starting acquisition
[Status 16:54:36 INFO] reading housekeeping
[Status 16:54:55 INFO] acquire complete
[Status 16:54:56 INFO] writing housekeeping
[Sequencer 16:54:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:54:56 INFO] incremented Z scene to 303 completed views
[Sequencer 16:54:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:54:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:54:56 INFO] incremented to [AERI set: name A304, 6 scans, 120 angle, D28300 command] set
[sigmove 16:54:56 INFO] Z303.SIG(18)
[sigmove 16:54:56 DEBUG] transformed Z303Ma.SPC -> Z303MA.SPC
[sigmove 16:54:56 DEBUG] transformed Z303Mb.SPC -> Z303MB.SPC
[sigmove 16:54:56 DEBUG] transformed Z303Mc.SPC -> Z303MC.SPC
[sigmove 16:54:56 DEBUG] transformed Z303Md.SPC -> Z303MD.SPC
[sigmove 16:54:56 DEBUG] transformed Z303Me.SPC -> Z303ME.SPC
[sigmove 16:54:56 DEBUG] transformed Z303Mf.SPC -> Z303MF.SPC
[Status 16:54:56 INFO] data for Z303 transferred to science data processing
[Tidy 16:54:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:54:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:54:56 INFO] resetting WatchDogTimer
[Status 16:54:56 INFO] Starting Set [AERI set: name A304, 6 scans, 120 angle, D28300 command]
[Ingest 16:54:56 INFO] Sending XML status message
[Status 16:54:56 INFO] Mirror angle: 120
[Mirror 16:54:56 INFO] rotating to position A
[Status 16:54:58 INFO] .SET file for ACQ96 ready
[Ingest 16:54:58 INFO] Starting acquisition
[Status 16:54:59 INFO] reading housekeeping
[Status 16:55:16 INFO] acquire complete
[Status 16:55:17 INFO] writing housekeeping
[Sequencer 16:55:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:55:17 INFO] incremented A scene to 304 completed views
[Sequencer 16:55:17 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:55:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:55:17 INFO] incremented to [AERI set: name H304, 6 scans, 60 angle, D22500 command] set
[sigmove 16:55:17 INFO] A304.SIG(18)
[sigmove 16:55:17 DEBUG] transformed A304Ma.SPC -> A304MA.SPC
[sigmove 16:55:17 DEBUG] transformed A304Mb.SPC -> A304MB.SPC
[sigmove 16:55:17 DEBUG] transformed A304Mc.SPC -> A304MC.SPC
[sigmove 16:55:17 DEBUG] transformed A304Md.SPC -> A304MD.SPC
[sigmove 16:55:17 DEBUG] transformed A304Me.SPC -> A304ME.SPC
[sigmove 16:55:17 DEBUG] transformed A304Mf.SPC -> A304MF.SPC
[Status 16:55:17 INFO] data for A304 transferred to science data processing
[Tidy 16:55:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:55:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:55:17 INFO] resetting WatchDogTimer
[Status 16:55:17 INFO] Starting Set [AERI set: name H304, 6 scans, 60 angle, D22500 command]
[Ingest 16:55:17 INFO] Sending XML status message
[Status 16:55:17 INFO] Mirror angle: 60
[Mirror 16:55:18 INFO] rotating to position H
[Status 16:55:19 INFO] .SET file for ACQ96 ready
[Ingest 16:55:19 INFO] Starting acquisition
[Status 16:55:20 INFO] reading housekeeping
[Status 16:55:37 INFO] acquire complete
[Status 16:55:38 INFO] writing housekeeping
[Sequencer 16:55:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:55:38 INFO] incremented H scene to 304 completed views
[Sequencer 16:55:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:55:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:55:38 INFO] incremented to [AERI set: name S304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:55:38 INFO] H304.SIG(18)
[sigmove 16:55:38 DEBUG] transformed H304Ma.SPC -> H304MA.SPC
[sigmove 16:55:38 DEBUG] transformed H304Mb.SPC -> H304MB.SPC
[sigmove 16:55:38 DEBUG] transformed H304Mc.SPC -> H304MC.SPC
[sigmove 16:55:38 DEBUG] transformed H304Md.SPC -> H304MD.SPC
[sigmove 16:55:38 DEBUG] transformed H304Me.SPC -> H304ME.SPC
[sigmove 16:55:38 DEBUG] transformed H304Mf.SPC -> H304MF.SPC
[Status 16:55:38 INFO] data for H304 transferred to science data processing
[Tidy 16:55:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:55:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:55:38 INFO] resetting WatchDogTimer
[Status 16:55:39 INFO] Starting Set [AERI set: name S304, 6 scans, 0 angle, D16300 command]
[Ingest 16:55:39 INFO] Sending XML status message
[Status 16:55:39 INFO] Mirror angle: 0
[Mirror 16:55:39 INFO] rotating to position S
[Status 16:55:40 INFO] .SET file for ACQ96 ready
[Ingest 16:55:41 INFO] Starting acquisition
[Status 16:55:41 INFO] reading housekeeping
[Status 16:55:59 INFO] acquire complete
[Status 16:56:00 INFO] writing housekeeping
[Sequencer 16:56:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:56:00 INFO] incremented S scene to 304 completed views
[Sequencer 16:56:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:56:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:56:00 INFO] incremented to [AERI set: name T304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:56:00 INFO] S304.SIG(18)
[sigmove 16:56:00 DEBUG] transformed S304Ma.SPC -> S304MA.SPC
[sigmove 16:56:00 DEBUG] transformed S304Mb.SPC -> S304MB.SPC
[sigmove 16:56:00 DEBUG] transformed S304Mc.SPC -> S304MC.SPC
[sigmove 16:56:00 DEBUG] transformed S304Md.SPC -> S304MD.SPC
[sigmove 16:56:00 DEBUG] transformed S304Me.SPC -> S304ME.SPC
[sigmove 16:56:00 DEBUG] transformed S304Mf.SPC -> S304MF.SPC
[Status 16:56:00 INFO] data for S304 transferred to science data processing
[Tidy 16:56:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:56:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:56:00 INFO] resetting WatchDogTimer
[Status 16:56:00 INFO] Starting Set [AERI set: name T304, 6 scans, 0 angle, D16300 command]
[Ingest 16:56:00 INFO] Sending XML status message
[Status 16:56:00 INFO] Mirror angle: 0
[Mirror 16:56:00 INFO] rotating to position T
[Status 16:56:01 INFO] .SET file for ACQ96 ready
[Ingest 16:56:01 INFO] Starting acquisition
[Status 16:56:02 INFO] reading housekeeping
[Status 16:56:20 INFO] acquire complete
[Status 16:56:21 INFO] writing housekeeping
[Sequencer 16:56:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:56:21 INFO] incremented T scene to 304 completed views
[Sequencer 16:56:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:56:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:56:21 INFO] incremented to [AERI set: name U304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:56:21 INFO] T304.SIG(18)
[sigmove 16:56:21 DEBUG] transformed T304Ma.SPC -> T304MA.SPC
[sigmove 16:56:21 DEBUG] transformed T304Mb.SPC -> T304MB.SPC
[sigmove 16:56:21 DEBUG] transformed T304Mc.SPC -> T304MC.SPC
[sigmove 16:56:21 DEBUG] transformed T304Md.SPC -> T304MD.SPC
[sigmove 16:56:21 DEBUG] transformed T304Me.SPC -> T304ME.SPC
[sigmove 16:56:21 DEBUG] transformed T304Mf.SPC -> T304MF.SPC
[Status 16:56:21 INFO] data for T304 transferred to science data processing
[Tidy 16:56:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:56:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:56:21 INFO] resetting WatchDogTimer
[Status 16:56:21 INFO] Starting Set [AERI set: name U304, 6 scans, 0 angle, D16300 command]
[Ingest 16:56:21 INFO] Sending XML status message
[Status 16:56:21 INFO] Mirror angle: 0
[Mirror 16:56:22 INFO] rotating to position U
[Status 16:56:22 INFO] .SET file for ACQ96 ready
[Ingest 16:56:23 INFO] Starting acquisition
[Status 16:56:23 INFO] reading housekeeping
[Status 16:56:40 INFO] acquire complete
[Status 16:56:41 INFO] writing housekeeping
[Sequencer 16:56:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:56:41 INFO] incremented U scene to 304 completed views
[Sequencer 16:56:41 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:56:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:56:41 INFO] incremented to [AERI set: name V304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:56:41 INFO] U304.SIG(18)
[sigmove 16:56:41 DEBUG] transformed U304Ma.SPC -> U304MA.SPC
[sigmove 16:56:41 DEBUG] transformed U304Mb.SPC -> U304MB.SPC
[sigmove 16:56:41 DEBUG] transformed U304Mc.SPC -> U304MC.SPC
[sigmove 16:56:41 DEBUG] transformed U304Md.SPC -> U304MD.SPC
[sigmove 16:56:41 DEBUG] transformed U304Me.SPC -> U304ME.SPC
[sigmove 16:56:41 DEBUG] transformed U304Mf.SPC -> U304MF.SPC
[Status 16:56:41 INFO] data for U304 transferred to science data processing
[Tidy 16:56:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:56:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:56:41 INFO] resetting WatchDogTimer
[Status 16:56:42 INFO] Starting Set [AERI set: name V304, 6 scans, 0 angle, D16300 command]
[Ingest 16:56:42 INFO] Sending XML status message
[Status 16:56:42 INFO] Mirror angle: 0
[Mirror 16:56:42 INFO] rotating to position V
[Status 16:56:43 INFO] .SET file for ACQ96 ready
[Ingest 16:56:43 INFO] Starting acquisition
[Status 16:56:43 INFO] reading housekeeping
[Status 16:57:02 INFO] acquire complete
[Status 16:57:03 INFO] writing housekeeping
[Sequencer 16:57:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:57:03 INFO] incremented V scene to 304 completed views
[Sequencer 16:57:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:57:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:57:03 INFO] incremented to [AERI set: name W304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:57:03 INFO] V304.SIG(18)
[sigmove 16:57:03 DEBUG] transformed V304Ma.SPC -> V304MA.SPC
[sigmove 16:57:03 DEBUG] transformed V304Mb.SPC -> V304MB.SPC
[sigmove 16:57:03 DEBUG] transformed V304Mc.SPC -> V304MC.SPC
[sigmove 16:57:03 DEBUG] transformed V304Md.SPC -> V304MD.SPC
[sigmove 16:57:03 DEBUG] transformed V304Me.SPC -> V304ME.SPC
[sigmove 16:57:03 DEBUG] transformed V304Mf.SPC -> V304MF.SPC
[Status 16:57:03 INFO] data for V304 transferred to science data processing
[Tidy 16:57:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:57:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:57:03 INFO] resetting WatchDogTimer
[Status 16:57:03 INFO] Starting Set [AERI set: name W304, 6 scans, 0 angle, D16300 command]
[Ingest 16:57:03 INFO] Sending XML status message
[Status 16:57:03 INFO] Mirror angle: 0
[Mirror 16:57:03 INFO] rotating to position W
[Status 16:57:04 INFO] .SET file for ACQ96 ready
[Ingest 16:57:04 INFO] Starting acquisition
[Status 16:57:05 INFO] reading housekeeping
[Status 16:57:22 INFO] acquire complete
[Status 16:57:23 INFO] writing housekeeping
[Sequencer 16:57:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:57:23 INFO] incremented W scene to 304 completed views
[Sequencer 16:57:23 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:57:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:57:23 INFO] incremented to [AERI set: name X304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:57:23 INFO] W304.SIG(18)
[sigmove 16:57:23 DEBUG] transformed W304Ma.SPC -> W304MA.SPC
[sigmove 16:57:23 DEBUG] transformed W304Mb.SPC -> W304MB.SPC
[sigmove 16:57:23 DEBUG] transformed W304Mc.SPC -> W304MC.SPC
[sigmove 16:57:23 DEBUG] transformed W304Md.SPC -> W304MD.SPC
[sigmove 16:57:23 DEBUG] transformed W304Me.SPC -> W304ME.SPC
[sigmove 16:57:23 DEBUG] transformed W304Mf.SPC -> W304MF.SPC
[Status 16:57:23 INFO] data for W304 transferred to science data processing
[Tidy 16:57:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:57:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:57:23 INFO] resetting WatchDogTimer
[Status 16:57:23 INFO] Starting Set [AERI set: name X304, 6 scans, 0 angle, D16300 command]
[Ingest 16:57:23 INFO] Sending XML status message
[Status 16:57:23 INFO] Mirror angle: 0
[Mirror 16:57:24 INFO] rotating to position X
[Status 16:57:24 INFO] .SET file for ACQ96 ready
[Ingest 16:57:24 INFO] Starting acquisition
[Status 16:57:25 INFO] reading housekeeping
[Status 16:57:42 INFO] acquire complete
[Status 16:57:43 INFO] writing housekeeping
[Sequencer 16:57:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:57:43 INFO] incremented X scene to 304 completed views
[Sequencer 16:57:43 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:57:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:57:43 INFO] incremented to [AERI set: name Y304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:57:43 INFO] X304.SIG(18)
[sigmove 16:57:43 DEBUG] transformed X304Ma.SPC -> X304MA.SPC
[sigmove 16:57:43 DEBUG] transformed X304Mb.SPC -> X304MB.SPC
[sigmove 16:57:43 DEBUG] transformed X304Mc.SPC -> X304MC.SPC
[sigmove 16:57:43 DEBUG] transformed X304Md.SPC -> X304MD.SPC
[sigmove 16:57:43 DEBUG] transformed X304Me.SPC -> X304ME.SPC
[sigmove 16:57:43 DEBUG] transformed X304Mf.SPC -> X304MF.SPC
[Status 16:57:43 INFO] data for X304 transferred to science data processing
[Tidy 16:57:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:57:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:57:43 INFO] resetting WatchDogTimer
[Status 16:57:43 INFO] Starting Set [AERI set: name Y304, 6 scans, 0 angle, D16300 command]
[Ingest 16:57:43 INFO] Sending XML status message
[Status 16:57:43 INFO] Mirror angle: 0
[Mirror 16:57:44 INFO] rotating to position Y
[Status 16:57:44 INFO] .SET file for ACQ96 ready
[Ingest 16:57:45 INFO] Starting acquisition
[Status 16:57:45 INFO] reading housekeeping
[Status 16:58:02 INFO] acquire complete
[Status 16:58:03 INFO] writing housekeeping
[Sequencer 16:58:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:58:03 INFO] incremented Y scene to 304 completed views
[Sequencer 16:58:03 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:58:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:58:03 INFO] incremented to [AERI set: name Z304, 6 scans, 0 angle, D16300 command] set
[sigmove 16:58:03 INFO] Y304.SIG(18)
[sigmove 16:58:03 DEBUG] transformed Y304Ma.SPC -> Y304MA.SPC
[sigmove 16:58:03 DEBUG] transformed Y304Mb.SPC -> Y304MB.SPC
[sigmove 16:58:03 DEBUG] transformed Y304Mc.SPC -> Y304MC.SPC
[sigmove 16:58:03 DEBUG] transformed Y304Md.SPC -> Y304MD.SPC
[sigmove 16:58:03 DEBUG] transformed Y304Me.SPC -> Y304ME.SPC
[sigmove 16:58:03 DEBUG] transformed Y304Mf.SPC -> Y304MF.SPC
[Status 16:58:03 INFO] data for Y304 transferred to science data processing
[Tidy 16:58:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:58:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:58:03 INFO] resetting WatchDogTimer
[Status 16:58:04 INFO] Starting Set [AERI set: name Z304, 6 scans, 0 angle, D16300 command]
[Ingest 16:58:04 INFO] Sending XML status message
[Status 16:58:04 INFO] Mirror angle: 0
[Mirror 16:58:04 INFO] rotating to position Z
[Status 16:58:04 INFO] .SET file for ACQ96 ready
[Ingest 16:58:05 INFO] Starting acquisition
[Status 16:58:05 INFO] reading housekeeping
[Status 16:58:22 INFO] acquire complete
[Status 16:58:23 INFO] writing housekeeping
[Sequencer 16:58:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:58:23 INFO] incremented Z scene to 304 completed views
[Sequencer 16:58:23 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 16:58:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:58:23 INFO] incremented to [AERI set: name H305, 6 scans, 60 angle, D22500 command] set
[sigmove 16:58:23 INFO] Z304.SIG(18)
[sigmove 16:58:23 DEBUG] transformed Z304Ma.SPC -> Z304MA.SPC
[sigmove 16:58:23 DEBUG] transformed Z304Mb.SPC -> Z304MB.SPC
[sigmove 16:58:23 DEBUG] transformed Z304Mc.SPC -> Z304MC.SPC
[sigmove 16:58:23 DEBUG] transformed Z304Md.SPC -> Z304MD.SPC
[sigmove 16:58:23 DEBUG] transformed Z304Me.SPC -> Z304ME.SPC
[sigmove 16:58:23 DEBUG] transformed Z304Mf.SPC -> Z304MF.SPC
[Status 16:58:23 INFO] data for Z304 transferred to science data processing
[Tidy 16:58:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:58:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:58:23 INFO] resetting WatchDogTimer
[Status 16:58:24 INFO] Starting Set [AERI set: name H305, 6 scans, 60 angle, D22500 command]
[Ingest 16:58:24 INFO] Sending XML status message
[Status 16:58:24 INFO] Mirror angle: 60
[Mirror 16:58:24 INFO] rotating to position H
[Status 16:58:25 INFO] .SET file for ACQ96 ready
[Ingest 16:58:26 INFO] Starting acquisition
[Status 16:58:26 INFO] reading housekeeping
[Status 16:58:44 INFO] acquire complete
[Status 16:58:45 INFO] writing housekeeping
[Sequencer 16:58:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:58:45 INFO] incremented H scene to 305 completed views
[Sequencer 16:58:45 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 16:58:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:58:45 INFO] incremented to [AERI set: name A305, 6 scans, 120 angle, D28300 command] set
[sigmove 16:58:45 INFO] H305.SIG(18)
[sigmove 16:58:45 DEBUG] transformed H305Ma.SPC -> H305MA.SPC
[sigmove 16:58:45 DEBUG] transformed H305Mb.SPC -> H305MB.SPC
[sigmove 16:58:45 DEBUG] transformed H305Mc.SPC -> H305MC.SPC
[sigmove 16:58:45 DEBUG] transformed H305Md.SPC -> H305MD.SPC
[sigmove 16:58:45 DEBUG] transformed H305Me.SPC -> H305ME.SPC
[sigmove 16:58:45 DEBUG] transformed H305Mf.SPC -> H305MF.SPC
[Status 16:58:45 INFO] data for H305 transferred to science data processing
[Tidy 16:58:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:58:45 INFO] A303.FIN(19),H303.FIN(19),S303.FIN(19),T303.FIN(19),U303.FIN(19),V303.FIN(19),W303.FIN(19),X303.FIN(19),Y303.FIN(19),Z303.FIN(19),A304.FIN(19),H304.FIN(19),S304.FIN(19),T304.FIN(19),U304.FIN(19),V304.FIN(19),W304.FIN(19),X304.FIN(19),Y304.FIN(19),Z304.FIN(19)
[sigmove 16:58:45 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:58:45 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 16:58:50 DEBUG] done zipping
[WatchDog 16:58:50 INFO] resetting WatchDogTimer
[Status 16:58:51 INFO] Starting Set [AERI set: name A305, 6 scans, 120 angle, D28300 command]
[Ingest 16:58:51 INFO] Sending XML status message
[Status 16:58:51 INFO] Mirror angle: 120
[Mirror 16:58:51 INFO] rotating to position A
[Status 16:58:52 INFO] .SET file for ACQ96 ready
[Ingest 16:58:52 INFO] Starting acquisition
[Status 16:58:53 INFO] reading housekeeping
[Status 16:59:11 INFO] acquire complete
[Status 16:59:12 INFO] writing housekeeping
[Sequencer 16:59:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:59:12 INFO] incremented A scene to 305 completed views
[Sequencer 16:59:12 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 16:59:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:59:12 INFO] incremented to [AERI set: name S305, 6 scans, 0 angle, D16300 command] set
[sigmove 16:59:12 INFO] A305.SIG(18)
[sigmove 16:59:12 DEBUG] transformed A305Ma.SPC -> A305MA.SPC
[sigmove 16:59:12 DEBUG] transformed A305Mb.SPC -> A305MB.SPC
[sigmove 16:59:12 DEBUG] transformed A305Mc.SPC -> A305MC.SPC
[sigmove 16:59:12 DEBUG] transformed A305Md.SPC -> A305MD.SPC
[sigmove 16:59:12 DEBUG] transformed A305Me.SPC -> A305ME.SPC
[sigmove 16:59:12 DEBUG] transformed A305Mf.SPC -> A305MF.SPC
[Status 16:59:12 INFO] data for A305 transferred to science data processing
[Tidy 16:59:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:59:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:59:12 INFO] resetting WatchDogTimer
[Status 16:59:12 INFO] Starting Set [AERI set: name S305, 6 scans, 0 angle, D16300 command]
[Ingest 16:59:12 INFO] Sending XML status message
[Status 16:59:12 INFO] Mirror angle: 0
[Mirror 16:59:12 INFO] rotating to position S
[Status 16:59:14 INFO] .SET file for ACQ96 ready
[Ingest 16:59:14 INFO] Starting acquisition
[Status 16:59:15 INFO] reading housekeeping
[Status 16:59:33 INFO] acquire complete
[Status 16:59:34 INFO] writing housekeeping
[Sequencer 16:59:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:59:34 INFO] incremented S scene to 305 completed views
[Sequencer 16:59:34 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:59:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:59:34 INFO] incremented to [AERI set: name T305, 6 scans, 0 angle, D16300 command] set
[sigmove 16:59:34 INFO] S305.SIG(18)
[sigmove 16:59:34 DEBUG] transformed S305Ma.SPC -> S305MA.SPC
[sigmove 16:59:34 DEBUG] transformed S305Mb.SPC -> S305MB.SPC
[sigmove 16:59:34 DEBUG] transformed S305Mc.SPC -> S305MC.SPC
[sigmove 16:59:34 DEBUG] transformed S305Md.SPC -> S305MD.SPC
[sigmove 16:59:34 DEBUG] transformed S305Me.SPC -> S305ME.SPC
[sigmove 16:59:34 DEBUG] transformed S305Mf.SPC -> S305MF.SPC
[Status 16:59:34 INFO] data for S305 transferred to science data processing
[Tidy 16:59:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:59:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:59:34 INFO] resetting WatchDogTimer
[Status 16:59:34 INFO] Starting Set [AERI set: name T305, 6 scans, 0 angle, D16300 command]
[Ingest 16:59:34 INFO] Sending XML status message
[Status 16:59:34 INFO] Mirror angle: 0
[Mirror 16:59:35 INFO] rotating to position T
[Status 16:59:35 INFO] .SET file for ACQ96 ready
[Ingest 16:59:36 INFO] Starting acquisition
[Status 16:59:36 INFO] reading housekeeping
[Status 16:59:53 INFO] acquire complete
[Status 16:59:54 INFO] writing housekeeping
[Sequencer 16:59:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 16:59:54 INFO] incremented T scene to 305 completed views
[Sequencer 16:59:54 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 16:59:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 16:59:54 INFO] incremented to [AERI set: name U305, 6 scans, 0 angle, D16300 command] set
[sigmove 16:59:54 INFO] T305.SIG(18)
[sigmove 16:59:54 DEBUG] transformed T305Ma.SPC -> T305MA.SPC
[sigmove 16:59:54 DEBUG] transformed T305Mb.SPC -> T305MB.SPC
[sigmove 16:59:54 DEBUG] transformed T305Mc.SPC -> T305MC.SPC
[sigmove 16:59:54 DEBUG] transformed T305Md.SPC -> T305MD.SPC
[sigmove 16:59:54 DEBUG] transformed T305Me.SPC -> T305ME.SPC
[sigmove 16:59:54 DEBUG] transformed T305Mf.SPC -> T305MF.SPC
[Status 16:59:54 INFO] data for T305 transferred to science data processing
[Tidy 16:59:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 16:59:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 16:59:54 INFO] resetting WatchDogTimer
[Status 16:59:55 INFO] Starting Set [AERI set: name U305, 6 scans, 0 angle, D16300 command]
[Ingest 16:59:55 INFO] Sending XML status message
[Status 16:59:55 INFO] Mirror angle: 0
[Mirror 16:59:55 INFO] rotating to position U
[Status 16:59:56 INFO] .SET file for ACQ96 ready
[Ingest 16:59:56 INFO] Starting acquisition
[Status 16:59:56 INFO] reading housekeeping
[Status 17:00:14 INFO] acquire complete
[Status 17:00:15 INFO] writing housekeeping
[Sequencer 17:00:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:00:15 INFO] incremented U scene to 305 completed views
[Sequencer 17:00:15 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:00:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:00:15 INFO] incremented to [AERI set: name V305, 6 scans, 0 angle, D16300 command] set
[sigmove 17:00:15 INFO] U305.SIG(18)
[sigmove 17:00:15 DEBUG] transformed U305Ma.SPC -> U305MA.SPC
[sigmove 17:00:15 DEBUG] transformed U305Mb.SPC -> U305MB.SPC
[sigmove 17:00:15 DEBUG] transformed U305Mc.SPC -> U305MC.SPC
[sigmove 17:00:15 DEBUG] transformed U305Md.SPC -> U305MD.SPC
[sigmove 17:00:15 DEBUG] transformed U305Me.SPC -> U305ME.SPC
[sigmove 17:00:15 DEBUG] transformed U305Mf.SPC -> U305MF.SPC
[Status 17:00:15 INFO] data for U305 transferred to science data processing
[Tidy 17:00:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:00:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:00:15 INFO] resetting WatchDogTimer
[Status 17:00:15 INFO] Starting Set [AERI set: name V305, 6 scans, 0 angle, D16300 command]
[Ingest 17:00:15 INFO] Sending XML status message
[Status 17:00:16 INFO] Mirror angle: 0
[Mirror 17:00:16 INFO] rotating to position V
[Status 17:00:16 INFO] .SET file for ACQ96 ready
[Ingest 17:00:17 INFO] Starting acquisition
[Status 17:00:17 INFO] reading housekeeping
[Status 17:00:35 INFO] acquire complete
[Status 17:00:36 INFO] writing housekeeping
[Sequencer 17:00:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:00:36 INFO] incremented V scene to 305 completed views
[Sequencer 17:00:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:00:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:00:36 INFO] incremented to [AERI set: name W305, 6 scans, 0 angle, D16300 command] set
[sigmove 17:00:36 INFO] V305.SIG(18)
[sigmove 17:00:36 DEBUG] transformed V305Ma.SPC -> V305MA.SPC
[sigmove 17:00:36 DEBUG] transformed V305Mb.SPC -> V305MB.SPC
[sigmove 17:00:36 DEBUG] transformed V305Mc.SPC -> V305MC.SPC
[sigmove 17:00:36 DEBUG] transformed V305Md.SPC -> V305MD.SPC
[sigmove 17:00:36 DEBUG] transformed V305Me.SPC -> V305ME.SPC
[sigmove 17:00:36 DEBUG] transformed V305Mf.SPC -> V305MF.SPC
[Status 17:00:36 INFO] data for V305 transferred to science data processing
[Tidy 17:00:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:00:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:00:36 INFO] resetting WatchDogTimer
[Status 17:00:36 INFO] Starting Set [AERI set: name W305, 6 scans, 0 angle, D16300 command]
[Ingest 17:00:36 INFO] Sending XML status message
[Status 17:00:36 INFO] Mirror angle: 0
[Mirror 17:00:37 INFO] rotating to position W
[Status 17:00:37 INFO] .SET file for ACQ96 ready
[Ingest 17:00:37 INFO] Starting acquisition
[Status 17:00:38 INFO] reading housekeeping
[Status 17:00:55 INFO] acquire complete
[Status 17:00:56 INFO] writing housekeeping
[Sequencer 17:00:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:00:56 INFO] incremented W scene to 305 completed views
[Sequencer 17:00:56 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:00:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:00:56 INFO] incremented to [AERI set: name X305, 6 scans, 0 angle, D16300 command] set
[sigmove 17:00:56 INFO] W305.SIG(18)
[sigmove 17:00:56 DEBUG] transformed W305Ma.SPC -> W305MA.SPC
[sigmove 17:00:56 DEBUG] transformed W305Mb.SPC -> W305MB.SPC
[sigmove 17:00:56 DEBUG] transformed W305Mc.SPC -> W305MC.SPC
[sigmove 17:00:56 DEBUG] transformed W305Md.SPC -> W305MD.SPC
[sigmove 17:00:56 DEBUG] transformed W305Me.SPC -> W305ME.SPC
[sigmove 17:00:56 DEBUG] transformed W305Mf.SPC -> W305MF.SPC
[Status 17:00:56 INFO] data for W305 transferred to science data processing
[Tidy 17:00:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:00:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:00:56 INFO] resetting WatchDogTimer
[Status 17:00:56 INFO] Starting Set [AERI set: name X305, 6 scans, 0 angle, D16300 command]
[Ingest 17:00:56 INFO] Sending XML status message
[Status 17:00:56 INFO] Mirror angle: 0
[Mirror 17:00:57 INFO] rotating to position X
[Status 17:00:57 INFO] .SET file for ACQ96 ready
[Ingest 17:00:58 INFO] Starting acquisition
[Status 17:00:58 INFO] reading housekeeping
[Status 17:01:15 INFO] acquire complete
[Status 17:01:16 INFO] writing housekeeping
[Sequencer 17:01:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:01:16 INFO] incremented X scene to 305 completed views
[Sequencer 17:01:16 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:01:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:01:16 INFO] incremented to [AERI set: name Y305, 6 scans, 0 angle, D16300 command] set
[sigmove 17:01:16 INFO] X305.SIG(18)
[sigmove 17:01:16 DEBUG] transformed X305Ma.SPC -> X305MA.SPC
[sigmove 17:01:16 DEBUG] transformed X305Mb.SPC -> X305MB.SPC
[sigmove 17:01:16 DEBUG] transformed X305Mc.SPC -> X305MC.SPC
[sigmove 17:01:16 DEBUG] transformed X305Md.SPC -> X305MD.SPC
[sigmove 17:01:16 DEBUG] transformed X305Me.SPC -> X305ME.SPC
[sigmove 17:01:16 DEBUG] transformed X305Mf.SPC -> X305MF.SPC
[Status 17:01:16 INFO] data for X305 transferred to science data processing
[Tidy 17:01:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:01:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:01:16 INFO] resetting WatchDogTimer
[Status 17:01:17 INFO] Starting Set [AERI set: name Y305, 6 scans, 0 angle, D16300 command]
[Ingest 17:01:17 INFO] Sending XML status message
[Status 17:01:17 INFO] Mirror angle: 0
[Mirror 17:01:17 INFO] rotating to position Y
[Status 17:01:17 INFO] .SET file for ACQ96 ready
[Ingest 17:01:18 INFO] Starting acquisition
[Status 17:01:18 INFO] reading housekeeping
[Status 17:01:35 INFO] acquire complete
[Status 17:01:36 INFO] writing housekeeping
[Sequencer 17:01:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:01:36 INFO] incremented Y scene to 305 completed views
[Sequencer 17:01:36 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:01:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:01:36 INFO] incremented to [AERI set: name Z305, 6 scans, 0 angle, D16300 command] set
[sigmove 17:01:36 INFO] Y305.SIG(18)
[sigmove 17:01:36 DEBUG] transformed Y305Ma.SPC -> Y305MA.SPC
[sigmove 17:01:36 DEBUG] transformed Y305Mb.SPC -> Y305MB.SPC
[sigmove 17:01:36 DEBUG] transformed Y305Mc.SPC -> Y305MC.SPC
[sigmove 17:01:36 DEBUG] transformed Y305Md.SPC -> Y305MD.SPC
[sigmove 17:01:36 DEBUG] transformed Y305Me.SPC -> Y305ME.SPC
[sigmove 17:01:36 DEBUG] transformed Y305Mf.SPC -> Y305MF.SPC
[Status 17:01:36 INFO] data for Y305 transferred to science data processing
[Tidy 17:01:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:01:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:01:36 INFO] resetting WatchDogTimer
[Status 17:01:37 INFO] Starting Set [AERI set: name Z305, 6 scans, 0 angle, D16300 command]
[Ingest 17:01:37 INFO] Sending XML status message
[Status 17:01:37 INFO] Mirror angle: 0
[Mirror 17:01:37 INFO] rotating to position Z
[Status 17:01:38 INFO] .SET file for ACQ96 ready
[Ingest 17:01:38 INFO] Starting acquisition
[Status 17:01:38 INFO] reading housekeeping
[Status 17:01:56 INFO] acquire complete
[Status 17:01:57 INFO] writing housekeeping
[Sequencer 17:01:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:01:57 INFO] incremented Z scene to 305 completed views
[Sequencer 17:01:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:01:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:01:57 INFO] incremented to [AERI set: name A306, 6 scans, 120 angle, D28300 command] set
[sigmove 17:01:57 INFO] Z305.SIG(18)
[sigmove 17:01:57 DEBUG] transformed Z305Ma.SPC -> Z305MA.SPC
[sigmove 17:01:57 DEBUG] transformed Z305Mb.SPC -> Z305MB.SPC
[sigmove 17:01:57 DEBUG] transformed Z305Mc.SPC -> Z305MC.SPC
[sigmove 17:01:57 DEBUG] transformed Z305Md.SPC -> Z305MD.SPC
[sigmove 17:01:57 DEBUG] transformed Z305Me.SPC -> Z305ME.SPC
[sigmove 17:01:57 DEBUG] transformed Z305Mf.SPC -> Z305MF.SPC
[Status 17:01:57 INFO] data for Z305 transferred to science data processing
[Tidy 17:01:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:01:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:01:57 INFO] resetting WatchDogTimer
[Status 17:01:57 INFO] Starting Set [AERI set: name A306, 6 scans, 120 angle, D28300 command]
[Ingest 17:01:57 INFO] Sending XML status message
[Status 17:01:57 INFO] Mirror angle: 120
[Mirror 17:01:57 INFO] rotating to position A
[Status 17:01:59 INFO] .SET file for ACQ96 ready
[Ingest 17:01:59 INFO] Starting acquisition
[Status 17:02:00 INFO] reading housekeeping
[Status 17:02:17 INFO] acquire complete
[Status 17:02:18 INFO] writing housekeeping
[Sequencer 17:02:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:02:18 INFO] incremented A scene to 306 completed views
[Sequencer 17:02:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:02:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:02:18 INFO] incremented to [AERI set: name H306, 6 scans, 60 angle, D22500 command] set
[sigmove 17:02:18 INFO] A306.SIG(18)
[sigmove 17:02:18 DEBUG] transformed A306Ma.SPC -> A306MA.SPC
[sigmove 17:02:18 DEBUG] transformed A306Mb.SPC -> A306MB.SPC
[sigmove 17:02:18 DEBUG] transformed A306Mc.SPC -> A306MC.SPC
[sigmove 17:02:18 DEBUG] transformed A306Md.SPC -> A306MD.SPC
[sigmove 17:02:18 DEBUG] transformed A306Me.SPC -> A306ME.SPC
[sigmove 17:02:18 DEBUG] transformed A306Mf.SPC -> A306MF.SPC
[Status 17:02:18 INFO] data for A306 transferred to science data processing
[Tidy 17:02:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:02:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:02:18 INFO] resetting WatchDogTimer
[Status 17:02:18 INFO] Starting Set [AERI set: name H306, 6 scans, 60 angle, D22500 command]
[Ingest 17:02:18 INFO] Sending XML status message
[Status 17:02:18 INFO] Mirror angle: 60
[Mirror 17:02:19 INFO] rotating to position H
[Status 17:02:20 INFO] .SET file for ACQ96 ready
[Ingest 17:02:20 INFO] Starting acquisition
[Status 17:02:20 INFO] reading housekeeping
[Status 17:02:38 INFO] acquire complete
[Status 17:02:39 INFO] writing housekeeping
[Sequencer 17:02:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:02:39 INFO] incremented H scene to 306 completed views
[Sequencer 17:02:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:02:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:02:39 INFO] incremented to [AERI set: name S306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:02:39 INFO] H306.SIG(18)
[sigmove 17:02:39 DEBUG] transformed H306Ma.SPC -> H306MA.SPC
[sigmove 17:02:39 DEBUG] transformed H306Mb.SPC -> H306MB.SPC
[sigmove 17:02:39 DEBUG] transformed H306Mc.SPC -> H306MC.SPC
[sigmove 17:02:39 DEBUG] transformed H306Md.SPC -> H306MD.SPC
[sigmove 17:02:39 DEBUG] transformed H306Me.SPC -> H306ME.SPC
[sigmove 17:02:39 DEBUG] transformed H306Mf.SPC -> H306MF.SPC
[Status 17:02:39 INFO] data for H306 transferred to science data processing
[Tidy 17:02:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:02:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:02:39 INFO] resetting WatchDogTimer
[Status 17:02:40 INFO] Starting Set [AERI set: name S306, 6 scans, 0 angle, D16300 command]
[Ingest 17:02:40 INFO] Sending XML status message
[Status 17:02:40 INFO] Mirror angle: 0
[Mirror 17:02:40 INFO] rotating to position S
[Status 17:02:41 INFO] .SET file for ACQ96 ready
[Ingest 17:02:41 INFO] Starting acquisition
[Status 17:02:42 INFO] reading housekeeping
[Status 17:03:00 INFO] acquire complete
[Status 17:03:01 INFO] writing housekeeping
[Sequencer 17:03:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:03:01 INFO] incremented S scene to 306 completed views
[Sequencer 17:03:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:03:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:03:01 INFO] incremented to [AERI set: name T306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:03:01 INFO] S306.SIG(18)
[sigmove 17:03:01 DEBUG] transformed S306Ma.SPC -> S306MA.SPC
[sigmove 17:03:01 DEBUG] transformed S306Mb.SPC -> S306MB.SPC
[sigmove 17:03:01 DEBUG] transformed S306Mc.SPC -> S306MC.SPC
[sigmove 17:03:01 DEBUG] transformed S306Md.SPC -> S306MD.SPC
[sigmove 17:03:01 DEBUG] transformed S306Me.SPC -> S306ME.SPC
[sigmove 17:03:01 DEBUG] transformed S306Mf.SPC -> S306MF.SPC
[Status 17:03:01 INFO] data for S306 transferred to science data processing
[Tidy 17:03:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:03:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:03:01 INFO] resetting WatchDogTimer
[Status 17:03:01 INFO] Starting Set [AERI set: name T306, 6 scans, 0 angle, D16300 command]
[Ingest 17:03:01 INFO] Sending XML status message
[Status 17:03:01 INFO] Mirror angle: 0
[Mirror 17:03:01 INFO] rotating to position T
[Status 17:03:02 INFO] .SET file for ACQ96 ready
[Ingest 17:03:02 INFO] Starting acquisition
[Status 17:03:03 INFO] reading housekeeping
[Status 17:03:21 INFO] acquire complete
[Status 17:03:22 INFO] writing housekeeping
[Sequencer 17:03:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:03:22 INFO] incremented T scene to 306 completed views
[Sequencer 17:03:22 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:03:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:03:22 INFO] incremented to [AERI set: name U306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:03:22 INFO] T306.SIG(18)
[sigmove 17:03:22 DEBUG] transformed T306Ma.SPC -> T306MA.SPC
[sigmove 17:03:22 DEBUG] transformed T306Mb.SPC -> T306MB.SPC
[sigmove 17:03:22 DEBUG] transformed T306Mc.SPC -> T306MC.SPC
[sigmove 17:03:22 DEBUG] transformed T306Md.SPC -> T306MD.SPC
[sigmove 17:03:22 DEBUG] transformed T306Me.SPC -> T306ME.SPC
[sigmove 17:03:22 DEBUG] transformed T306Mf.SPC -> T306MF.SPC
[Status 17:03:22 INFO] data for T306 transferred to science data processing
[Tidy 17:03:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:03:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:03:22 INFO] resetting WatchDogTimer
[Status 17:03:22 INFO] Starting Set [AERI set: name U306, 6 scans, 0 angle, D16300 command]
[Ingest 17:03:22 INFO] Sending XML status message
[Status 17:03:22 INFO] Mirror angle: 0
[Mirror 17:03:23 INFO] rotating to position U
[Status 17:03:23 INFO] .SET file for ACQ96 ready
[Ingest 17:03:24 INFO] Starting acquisition
[Status 17:03:24 INFO] reading housekeeping
[Status 17:03:42 INFO] acquire complete
[Status 17:03:43 INFO] writing housekeeping
[Sequencer 17:03:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:03:43 INFO] incremented U scene to 306 completed views
[Sequencer 17:03:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:03:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:03:43 INFO] incremented to [AERI set: name V306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:03:43 INFO] U306.SIG(18)
[sigmove 17:03:43 DEBUG] transformed U306Ma.SPC -> U306MA.SPC
[sigmove 17:03:43 DEBUG] transformed U306Mb.SPC -> U306MB.SPC
[sigmove 17:03:43 DEBUG] transformed U306Mc.SPC -> U306MC.SPC
[sigmove 17:03:43 DEBUG] transformed U306Md.SPC -> U306MD.SPC
[sigmove 17:03:43 DEBUG] transformed U306Me.SPC -> U306ME.SPC
[sigmove 17:03:43 DEBUG] transformed U306Mf.SPC -> U306MF.SPC
[Status 17:03:43 INFO] data for U306 transferred to science data processing
[Tidy 17:03:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:03:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:03:43 INFO] resetting WatchDogTimer
[Status 17:03:44 INFO] Starting Set [AERI set: name V306, 6 scans, 0 angle, D16300 command]
[Ingest 17:03:44 INFO] Sending XML status message
[Status 17:03:44 INFO] Mirror angle: 0
[Mirror 17:03:44 INFO] rotating to position V
[Status 17:03:44 INFO] .SET file for ACQ96 ready
[Ingest 17:03:45 INFO] Starting acquisition
[Status 17:03:45 INFO] reading housekeeping
[Status 17:04:02 INFO] acquire complete
[Status 17:04:03 INFO] writing housekeeping
[Sequencer 17:04:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:04:03 INFO] incremented V scene to 306 completed views
[Sequencer 17:04:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:04:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:04:03 INFO] incremented to [AERI set: name W306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:04:03 INFO] V306.SIG(18)
[sigmove 17:04:03 DEBUG] transformed V306Ma.SPC -> V306MA.SPC
[sigmove 17:04:03 DEBUG] transformed V306Mb.SPC -> V306MB.SPC
[sigmove 17:04:03 DEBUG] transformed V306Mc.SPC -> V306MC.SPC
[sigmove 17:04:03 DEBUG] transformed V306Md.SPC -> V306MD.SPC
[sigmove 17:04:03 DEBUG] transformed V306Me.SPC -> V306ME.SPC
[sigmove 17:04:03 DEBUG] transformed V306Mf.SPC -> V306MF.SPC
[Status 17:04:03 INFO] data for V306 transferred to science data processing
[Tidy 17:04:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:04:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:04:03 INFO] resetting WatchDogTimer
[Status 17:04:04 INFO] Starting Set [AERI set: name W306, 6 scans, 0 angle, D16300 command]
[Ingest 17:04:04 INFO] Sending XML status message
[Status 17:04:04 INFO] Mirror angle: 0
[Mirror 17:04:04 INFO] rotating to position W
[Status 17:04:05 INFO] .SET file for ACQ96 ready
[Ingest 17:04:05 INFO] Starting acquisition
[Status 17:04:05 INFO] reading housekeeping
[Status 17:04:23 INFO] acquire complete
[Status 17:04:24 INFO] writing housekeeping
[Sequencer 17:04:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:04:24 INFO] incremented W scene to 306 completed views
[Sequencer 17:04:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:04:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:04:24 INFO] incremented to [AERI set: name X306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:04:24 INFO] W306.SIG(18)
[sigmove 17:04:24 DEBUG] transformed W306Ma.SPC -> W306MA.SPC
[sigmove 17:04:24 DEBUG] transformed W306Mb.SPC -> W306MB.SPC
[sigmove 17:04:24 DEBUG] transformed W306Mc.SPC -> W306MC.SPC
[sigmove 17:04:24 DEBUG] transformed W306Md.SPC -> W306MD.SPC
[sigmove 17:04:24 DEBUG] transformed W306Me.SPC -> W306ME.SPC
[sigmove 17:04:24 DEBUG] transformed W306Mf.SPC -> W306MF.SPC
[Status 17:04:24 INFO] data for W306 transferred to science data processing
[Tidy 17:04:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:04:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:04:24 INFO] resetting WatchDogTimer
[Status 17:04:24 INFO] Starting Set [AERI set: name X306, 6 scans, 0 angle, D16300 command]
[Ingest 17:04:24 INFO] Sending XML status message
[Status 17:04:24 INFO] Mirror angle: 0
[Mirror 17:04:24 INFO] rotating to position X
[Status 17:04:25 INFO] .SET file for ACQ96 ready
[Ingest 17:04:25 INFO] Starting acquisition
[Status 17:04:26 INFO] reading housekeeping
[Status 17:04:43 INFO] acquire complete
[Status 17:04:44 INFO] writing housekeeping
[Sequencer 17:04:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:04:44 INFO] incremented X scene to 306 completed views
[Sequencer 17:04:44 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:04:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:04:44 INFO] incremented to [AERI set: name Y306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:04:44 INFO] X306.SIG(18)
[sigmove 17:04:44 DEBUG] transformed X306Ma.SPC -> X306MA.SPC
[sigmove 17:04:44 DEBUG] transformed X306Mb.SPC -> X306MB.SPC
[sigmove 17:04:44 DEBUG] transformed X306Mc.SPC -> X306MC.SPC
[sigmove 17:04:44 DEBUG] transformed X306Md.SPC -> X306MD.SPC
[sigmove 17:04:44 DEBUG] transformed X306Me.SPC -> X306ME.SPC
[sigmove 17:04:44 DEBUG] transformed X306Mf.SPC -> X306MF.SPC
[Status 17:04:44 INFO] data for X306 transferred to science data processing
[Tidy 17:04:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:04:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:04:44 INFO] resetting WatchDogTimer
[Status 17:04:44 INFO] Starting Set [AERI set: name Y306, 6 scans, 0 angle, D16300 command]
[Ingest 17:04:44 INFO] Sending XML status message
[Status 17:04:44 INFO] Mirror angle: 0
[Mirror 17:04:45 INFO] rotating to position Y
[Status 17:04:45 INFO] .SET file for ACQ96 ready
[Ingest 17:04:45 INFO] Starting acquisition
[Status 17:04:46 INFO] reading housekeeping
[Status 17:05:03 INFO] acquire complete
[Status 17:05:04 INFO] writing housekeeping
[Sequencer 17:05:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:05:04 INFO] incremented Y scene to 306 completed views
[Sequencer 17:05:04 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:05:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:05:04 INFO] incremented to [AERI set: name Z306, 6 scans, 0 angle, D16300 command] set
[sigmove 17:05:04 INFO] Y306.SIG(18)
[sigmove 17:05:04 DEBUG] transformed Y306Ma.SPC -> Y306MA.SPC
[sigmove 17:05:04 DEBUG] transformed Y306Mb.SPC -> Y306MB.SPC
[sigmove 17:05:04 DEBUG] transformed Y306Mc.SPC -> Y306MC.SPC
[sigmove 17:05:04 DEBUG] transformed Y306Md.SPC -> Y306MD.SPC
[sigmove 17:05:04 DEBUG] transformed Y306Me.SPC -> Y306ME.SPC
[sigmove 17:05:04 DEBUG] transformed Y306Mf.SPC -> Y306MF.SPC
[Status 17:05:04 INFO] data for Y306 transferred to science data processing
[Tidy 17:05:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:05:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:05:04 INFO] resetting WatchDogTimer
[Status 17:05:04 INFO] Starting Set [AERI set: name Z306, 6 scans, 0 angle, D16300 command]
[Ingest 17:05:04 INFO] Sending XML status message
[Status 17:05:04 INFO] Mirror angle: 0
[Mirror 17:05:05 INFO] rotating to position Z
[Status 17:05:05 INFO] .SET file for ACQ96 ready
[Ingest 17:05:06 INFO] Starting acquisition
[Status 17:05:06 INFO] reading housekeeping
[Status 17:05:24 INFO] acquire complete
[Status 17:05:25 INFO] writing housekeeping
[Sequencer 17:05:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:05:25 INFO] incremented Z scene to 306 completed views
[Sequencer 17:05:25 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:05:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:05:25 INFO] incremented to [AERI set: name H307, 6 scans, 60 angle, D22500 command] set
[sigmove 17:05:25 INFO] Z306.SIG(18)
[sigmove 17:05:25 DEBUG] transformed Z306Ma.SPC -> Z306MA.SPC
[sigmove 17:05:25 DEBUG] transformed Z306Mb.SPC -> Z306MB.SPC
[sigmove 17:05:25 DEBUG] transformed Z306Mc.SPC -> Z306MC.SPC
[sigmove 17:05:25 DEBUG] transformed Z306Md.SPC -> Z306MD.SPC
[sigmove 17:05:25 DEBUG] transformed Z306Me.SPC -> Z306ME.SPC
[sigmove 17:05:25 DEBUG] transformed Z306Mf.SPC -> Z306MF.SPC
[Status 17:05:25 INFO] data for Z306 transferred to science data processing
[Tidy 17:05:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:05:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:05:25 INFO] resetting WatchDogTimer
[Status 17:05:26 INFO] Starting Set [AERI set: name H307, 6 scans, 60 angle, D22500 command]
[Ingest 17:05:26 INFO] Sending XML status message
[Status 17:05:26 INFO] Mirror angle: 60
[Mirror 17:05:26 INFO] rotating to position H
[Status 17:05:27 INFO] .SET file for ACQ96 ready
[Ingest 17:05:27 INFO] Starting acquisition
[Status 17:05:28 INFO] reading housekeeping
[Status 17:05:46 INFO] acquire complete
[Status 17:05:47 INFO] writing housekeeping
[Sequencer 17:05:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:05:47 INFO] incremented H scene to 307 completed views
[Sequencer 17:05:47 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:05:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:05:47 INFO] incremented to [AERI set: name A307, 6 scans, 120 angle, D28300 command] set
[sigmove 17:05:47 INFO] H307.SIG(18)
[sigmove 17:05:47 DEBUG] transformed H307Ma.SPC -> H307MA.SPC
[sigmove 17:05:47 DEBUG] transformed H307Mb.SPC -> H307MB.SPC
[sigmove 17:05:47 DEBUG] transformed H307Mc.SPC -> H307MC.SPC
[sigmove 17:05:47 DEBUG] transformed H307Md.SPC -> H307MD.SPC
[sigmove 17:05:47 DEBUG] transformed H307Me.SPC -> H307ME.SPC
[sigmove 17:05:47 DEBUG] transformed H307Mf.SPC -> H307MF.SPC
[Status 17:05:47 INFO] data for H307 transferred to science data processing
[Tidy 17:05:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:05:47 INFO] A305.FIN(19),H305.FIN(19),S305.FIN(19),T305.FIN(19),U305.FIN(19),V305.FIN(19),W305.FIN(19),X305.FIN(19),Y305.FIN(19),Z305.FIN(19),A306.FIN(19),H306.FIN(19),S306.FIN(19),T306.FIN(19),U306.FIN(19),V306.FIN(19),W306.FIN(19),X306.FIN(19),Y306.FIN(19),Z306.FIN(19)
[sigmove 17:05:47 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:05:47 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:05:52 DEBUG] done zipping
[WatchDog 17:05:52 INFO] resetting WatchDogTimer
[Status 17:05:53 INFO] Starting Set [AERI set: name A307, 6 scans, 120 angle, D28300 command]
[Ingest 17:05:53 INFO] Sending XML status message
[Status 17:05:53 INFO] Mirror angle: 120
[Mirror 17:05:53 INFO] rotating to position A
[Status 17:05:54 INFO] .SET file for ACQ96 ready
[Ingest 17:05:54 INFO] Starting acquisition
[Status 17:05:55 INFO] reading housekeeping
[Status 17:06:13 INFO] acquire complete
[Status 17:06:14 INFO] writing housekeeping
[Sequencer 17:06:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:06:14 INFO] incremented A scene to 307 completed views
[Sequencer 17:06:14 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:06:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:06:14 INFO] incremented to [AERI set: name S307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:06:14 INFO] A307.SIG(18)
[sigmove 17:06:14 DEBUG] transformed A307Ma.SPC -> A307MA.SPC
[sigmove 17:06:14 DEBUG] transformed A307Mb.SPC -> A307MB.SPC
[sigmove 17:06:14 DEBUG] transformed A307Mc.SPC -> A307MC.SPC
[sigmove 17:06:14 DEBUG] transformed A307Md.SPC -> A307MD.SPC
[sigmove 17:06:14 DEBUG] transformed A307Me.SPC -> A307ME.SPC
[sigmove 17:06:14 DEBUG] transformed A307Mf.SPC -> A307MF.SPC
[Status 17:06:14 INFO] data for A307 transferred to science data processing
[Tidy 17:06:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:06:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:06:14 INFO] resetting WatchDogTimer
[Status 17:06:14 INFO] Starting Set [AERI set: name S307, 6 scans, 0 angle, D16300 command]
[Ingest 17:06:14 INFO] Sending XML status message
[Status 17:06:14 INFO] Mirror angle: 0
[Mirror 17:06:14 INFO] rotating to position S
[Status 17:06:16 INFO] .SET file for ACQ96 ready
[Ingest 17:06:16 INFO] Starting acquisition
[Status 17:06:17 INFO] reading housekeeping
[Status 17:06:34 INFO] acquire complete
[Status 17:06:35 INFO] writing housekeeping
[Sequencer 17:06:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:06:35 INFO] incremented S scene to 307 completed views
[Sequencer 17:06:35 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:06:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:06:35 INFO] incremented to [AERI set: name T307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:06:35 INFO] S307.SIG(18)
[sigmove 17:06:35 DEBUG] transformed S307Ma.SPC -> S307MA.SPC
[sigmove 17:06:35 DEBUG] transformed S307Mb.SPC -> S307MB.SPC
[sigmove 17:06:35 DEBUG] transformed S307Mc.SPC -> S307MC.SPC
[sigmove 17:06:35 DEBUG] transformed S307Md.SPC -> S307MD.SPC
[sigmove 17:06:35 DEBUG] transformed S307Me.SPC -> S307ME.SPC
[sigmove 17:06:35 DEBUG] transformed S307Mf.SPC -> S307MF.SPC
[Status 17:06:35 INFO] data for S307 transferred to science data processing
[Tidy 17:06:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:06:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:06:35 INFO] resetting WatchDogTimer
[Status 17:06:35 INFO] Starting Set [AERI set: name T307, 6 scans, 0 angle, D16300 command]
[Ingest 17:06:35 INFO] Sending XML status message
[Status 17:06:35 INFO] Mirror angle: 0
[Mirror 17:06:36 INFO] rotating to position T
[Status 17:06:36 INFO] .SET file for ACQ96 ready
[Ingest 17:06:36 INFO] Starting acquisition
[Status 17:06:37 INFO] reading housekeeping
[Status 17:06:54 INFO] acquire complete
[Status 17:06:55 INFO] writing housekeeping
[Sequencer 17:06:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:06:55 INFO] incremented T scene to 307 completed views
[Sequencer 17:06:55 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:06:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:06:55 INFO] incremented to [AERI set: name U307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:06:55 INFO] T307.SIG(18)
[sigmove 17:06:55 DEBUG] transformed T307Ma.SPC -> T307MA.SPC
[sigmove 17:06:55 DEBUG] transformed T307Mb.SPC -> T307MB.SPC
[sigmove 17:06:55 DEBUG] transformed T307Mc.SPC -> T307MC.SPC
[sigmove 17:06:55 DEBUG] transformed T307Md.SPC -> T307MD.SPC
[sigmove 17:06:55 DEBUG] transformed T307Me.SPC -> T307ME.SPC
[sigmove 17:06:55 DEBUG] transformed T307Mf.SPC -> T307MF.SPC
[Status 17:06:55 INFO] data for T307 transferred to science data processing
[Tidy 17:06:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:06:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:06:55 INFO] resetting WatchDogTimer
[Status 17:06:55 INFO] Starting Set [AERI set: name U307, 6 scans, 0 angle, D16300 command]
[Ingest 17:06:55 INFO] Sending XML status message
[Status 17:06:55 INFO] Mirror angle: 0
[Mirror 17:06:56 INFO] rotating to position U
[Status 17:06:56 INFO] .SET file for ACQ96 ready
[Ingest 17:06:57 INFO] Starting acquisition
[Status 17:06:57 INFO] reading housekeeping
[Status 17:07:14 INFO] acquire complete
[Status 17:07:15 INFO] writing housekeeping
[Sequencer 17:07:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:07:15 INFO] incremented U scene to 307 completed views
[Sequencer 17:07:15 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:07:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:07:15 INFO] incremented to [AERI set: name V307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:07:15 INFO] U307.SIG(18)
[sigmove 17:07:15 DEBUG] transformed U307Ma.SPC -> U307MA.SPC
[sigmove 17:07:15 DEBUG] transformed U307Mb.SPC -> U307MB.SPC
[sigmove 17:07:15 DEBUG] transformed U307Mc.SPC -> U307MC.SPC
[sigmove 17:07:15 DEBUG] transformed U307Md.SPC -> U307MD.SPC
[sigmove 17:07:15 DEBUG] transformed U307Me.SPC -> U307ME.SPC
[sigmove 17:07:15 DEBUG] transformed U307Mf.SPC -> U307MF.SPC
[Status 17:07:15 INFO] data for U307 transferred to science data processing
[Tidy 17:07:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:07:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:07:15 INFO] resetting WatchDogTimer
[Status 17:07:16 INFO] Starting Set [AERI set: name V307, 6 scans, 0 angle, D16300 command]
[Ingest 17:07:16 INFO] Sending XML status message
[Status 17:07:16 INFO] Mirror angle: 0
[Mirror 17:07:16 INFO] rotating to position V
[Status 17:07:17 INFO] .SET file for ACQ96 ready
[Ingest 17:07:17 INFO] Starting acquisition
[Status 17:07:17 INFO] reading housekeeping
[Status 17:07:34 INFO] acquire complete
[Status 17:07:35 INFO] writing housekeeping
[Sequencer 17:07:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:07:35 INFO] incremented V scene to 307 completed views
[Sequencer 17:07:35 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:07:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:07:35 INFO] incremented to [AERI set: name W307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:07:35 INFO] V307.SIG(18)
[sigmove 17:07:35 DEBUG] transformed V307Ma.SPC -> V307MA.SPC
[sigmove 17:07:35 DEBUG] transformed V307Mb.SPC -> V307MB.SPC
[sigmove 17:07:35 DEBUG] transformed V307Mc.SPC -> V307MC.SPC
[sigmove 17:07:35 DEBUG] transformed V307Md.SPC -> V307MD.SPC
[sigmove 17:07:35 DEBUG] transformed V307Me.SPC -> V307ME.SPC
[sigmove 17:07:35 DEBUG] transformed V307Mf.SPC -> V307MF.SPC
[Status 17:07:35 INFO] data for V307 transferred to science data processing
[Tidy 17:07:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:07:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:07:35 INFO] resetting WatchDogTimer
[Status 17:07:36 INFO] Starting Set [AERI set: name W307, 6 scans, 0 angle, D16300 command]
[Ingest 17:07:36 INFO] Sending XML status message
[Status 17:07:36 INFO] Mirror angle: 0
[Mirror 17:07:36 INFO] rotating to position W
[Status 17:07:37 INFO] .SET file for ACQ96 ready
[Ingest 17:07:37 INFO] Starting acquisition
[Status 17:07:37 INFO] reading housekeeping
[Status 17:07:55 INFO] acquire complete
[Status 17:07:56 INFO] writing housekeeping
[Sequencer 17:07:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:07:56 INFO] incremented W scene to 307 completed views
[Sequencer 17:07:56 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:07:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:07:56 INFO] incremented to [AERI set: name X307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:07:56 INFO] W307.SIG(18)
[sigmove 17:07:56 DEBUG] transformed W307Ma.SPC -> W307MA.SPC
[sigmove 17:07:56 DEBUG] transformed W307Mb.SPC -> W307MB.SPC
[sigmove 17:07:56 DEBUG] transformed W307Mc.SPC -> W307MC.SPC
[sigmove 17:07:56 DEBUG] transformed W307Md.SPC -> W307MD.SPC
[sigmove 17:07:56 DEBUG] transformed W307Me.SPC -> W307ME.SPC
[sigmove 17:07:56 DEBUG] transformed W307Mf.SPC -> W307MF.SPC
[Status 17:07:56 INFO] data for W307 transferred to science data processing
[Tidy 17:07:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:07:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:07:56 INFO] resetting WatchDogTimer
[Status 17:07:56 INFO] Starting Set [AERI set: name X307, 6 scans, 0 angle, D16300 command]
[Ingest 17:07:56 INFO] Sending XML status message
[Status 17:07:56 INFO] Mirror angle: 0
[Mirror 17:07:56 INFO] rotating to position X
[Status 17:07:57 INFO] .SET file for ACQ96 ready
[Ingest 17:07:57 INFO] Starting acquisition
[Status 17:07:58 INFO] reading housekeeping
[Status 17:08:15 INFO] acquire complete
[Status 17:08:16 INFO] writing housekeeping
[Sequencer 17:08:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:08:16 INFO] incremented X scene to 307 completed views
[Sequencer 17:08:16 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:08:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:08:16 INFO] incremented to [AERI set: name Y307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:08:16 INFO] X307.SIG(18)
[sigmove 17:08:16 DEBUG] transformed X307Ma.SPC -> X307MA.SPC
[sigmove 17:08:16 DEBUG] transformed X307Mb.SPC -> X307MB.SPC
[sigmove 17:08:16 DEBUG] transformed X307Mc.SPC -> X307MC.SPC
[sigmove 17:08:16 DEBUG] transformed X307Md.SPC -> X307MD.SPC
[sigmove 17:08:16 DEBUG] transformed X307Me.SPC -> X307ME.SPC
[sigmove 17:08:16 DEBUG] transformed X307Mf.SPC -> X307MF.SPC
[Status 17:08:16 INFO] data for X307 transferred to science data processing
[Tidy 17:08:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:08:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:08:16 INFO] resetting WatchDogTimer
[Status 17:08:16 INFO] Starting Set [AERI set: name Y307, 6 scans, 0 angle, D16300 command]
[Ingest 17:08:16 INFO] Sending XML status message
[Status 17:08:16 INFO] Mirror angle: 0
[Mirror 17:08:17 INFO] rotating to position Y
[Status 17:08:17 INFO] .SET file for ACQ96 ready
[Ingest 17:08:17 INFO] Starting acquisition
[Status 17:08:18 INFO] reading housekeeping
[Status 17:08:35 INFO] acquire complete
[Status 17:08:36 INFO] writing housekeeping
[Sequencer 17:08:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:08:36 INFO] incremented Y scene to 307 completed views
[Sequencer 17:08:36 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:08:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:08:36 INFO] incremented to [AERI set: name Z307, 6 scans, 0 angle, D16300 command] set
[sigmove 17:08:36 INFO] Y307.SIG(18)
[sigmove 17:08:36 DEBUG] transformed Y307Ma.SPC -> Y307MA.SPC
[sigmove 17:08:36 DEBUG] transformed Y307Mb.SPC -> Y307MB.SPC
[sigmove 17:08:36 DEBUG] transformed Y307Mc.SPC -> Y307MC.SPC
[sigmove 17:08:36 DEBUG] transformed Y307Md.SPC -> Y307MD.SPC
[sigmove 17:08:36 DEBUG] transformed Y307Me.SPC -> Y307ME.SPC
[sigmove 17:08:36 DEBUG] transformed Y307Mf.SPC -> Y307MF.SPC
[Status 17:08:36 INFO] data for Y307 transferred to science data processing
[Tidy 17:08:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:08:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:08:36 INFO] resetting WatchDogTimer
[Status 17:08:36 INFO] Starting Set [AERI set: name Z307, 6 scans, 0 angle, D16300 command]
[Ingest 17:08:36 INFO] Sending XML status message
[Status 17:08:36 INFO] Mirror angle: 0
[Mirror 17:08:37 INFO] rotating to position Z
[Status 17:08:37 INFO] .SET file for ACQ96 ready
[Ingest 17:08:38 INFO] Starting acquisition
[Status 17:08:38 INFO] reading housekeeping
[Status 17:08:55 INFO] acquire complete
[Status 17:08:56 INFO] writing housekeeping
[Sequencer 17:08:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:08:56 INFO] incremented Z scene to 307 completed views
[Sequencer 17:08:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:08:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:08:56 INFO] incremented to [AERI set: name A308, 6 scans, 120 angle, D28300 command] set
[sigmove 17:08:56 INFO] Z307.SIG(18)
[sigmove 17:08:56 DEBUG] transformed Z307Ma.SPC -> Z307MA.SPC
[sigmove 17:08:56 DEBUG] transformed Z307Mb.SPC -> Z307MB.SPC
[sigmove 17:08:56 DEBUG] transformed Z307Mc.SPC -> Z307MC.SPC
[sigmove 17:08:56 DEBUG] transformed Z307Md.SPC -> Z307MD.SPC
[sigmove 17:08:56 DEBUG] transformed Z307Me.SPC -> Z307ME.SPC
[sigmove 17:08:56 DEBUG] transformed Z307Mf.SPC -> Z307MF.SPC
[Status 17:08:56 INFO] data for Z307 transferred to science data processing
[Tidy 17:08:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:08:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:08:56 INFO] resetting WatchDogTimer
[Status 17:08:57 INFO] Starting Set [AERI set: name A308, 6 scans, 120 angle, D28300 command]
[Ingest 17:08:57 INFO] Sending XML status message
[Status 17:08:57 INFO] Mirror angle: 120
[Mirror 17:08:57 INFO] rotating to position A
[Status 17:08:58 INFO] .SET file for ACQ96 ready
[Ingest 17:08:59 INFO] Starting acquisition
[Status 17:08:59 INFO] reading housekeeping
[Status 17:09:16 INFO] acquire complete
[Status 17:09:18 INFO] writing housekeeping
[Sequencer 17:09:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:09:18 INFO] incremented A scene to 308 completed views
[Sequencer 17:09:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:09:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:09:18 INFO] incremented to [AERI set: name H308, 6 scans, 60 angle, D22500 command] set
[sigmove 17:09:18 INFO] A308.SIG(18)
[sigmove 17:09:18 DEBUG] transformed A308Ma.SPC -> A308MA.SPC
[sigmove 17:09:18 DEBUG] transformed A308Mb.SPC -> A308MB.SPC
[sigmove 17:09:18 DEBUG] transformed A308Mc.SPC -> A308MC.SPC
[sigmove 17:09:18 DEBUG] transformed A308Md.SPC -> A308MD.SPC
[sigmove 17:09:18 DEBUG] transformed A308Me.SPC -> A308ME.SPC
[sigmove 17:09:18 DEBUG] transformed A308Mf.SPC -> A308MF.SPC
[Status 17:09:18 INFO] data for A308 transferred to science data processing
[Tidy 17:09:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:09:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:09:18 INFO] resetting WatchDogTimer
[Status 17:09:18 INFO] Starting Set [AERI set: name H308, 6 scans, 60 angle, D22500 command]
[Ingest 17:09:18 INFO] Sending XML status message
[Status 17:09:18 INFO] Mirror angle: 60
[Mirror 17:09:18 INFO] rotating to position H
[Status 17:09:19 INFO] .SET file for ACQ96 ready
[Ingest 17:09:20 INFO] Starting acquisition
[Status 17:09:20 INFO] reading housekeeping
[Status 17:09:38 INFO] acquire complete
[Status 17:09:39 INFO] writing housekeeping
[Sequencer 17:09:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:09:39 INFO] incremented H scene to 308 completed views
[Sequencer 17:09:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:09:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:09:39 INFO] incremented to [AERI set: name S308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:09:39 INFO] H308.SIG(18)
[sigmove 17:09:39 DEBUG] transformed H308Ma.SPC -> H308MA.SPC
[sigmove 17:09:39 DEBUG] transformed H308Mb.SPC -> H308MB.SPC
[sigmove 17:09:39 DEBUG] transformed H308Mc.SPC -> H308MC.SPC
[sigmove 17:09:39 DEBUG] transformed H308Md.SPC -> H308MD.SPC
[sigmove 17:09:39 DEBUG] transformed H308Me.SPC -> H308ME.SPC
[sigmove 17:09:39 DEBUG] transformed H308Mf.SPC -> H308MF.SPC
[Status 17:09:39 INFO] data for H308 transferred to science data processing
[Tidy 17:09:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:09:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:09:39 INFO] resetting WatchDogTimer
[Status 17:09:39 INFO] Starting Set [AERI set: name S308, 6 scans, 0 angle, D16300 command]
[Ingest 17:09:39 INFO] Sending XML status message
[Status 17:09:39 INFO] Mirror angle: 0
[Mirror 17:09:40 INFO] rotating to position S
[Status 17:09:41 INFO] .SET file for ACQ96 ready
[Ingest 17:09:41 INFO] Starting acquisition
[Status 17:09:41 INFO] reading housekeeping
[Status 17:09:59 INFO] acquire complete
[Status 17:10:00 INFO] writing housekeeping
[Sequencer 17:10:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:10:00 INFO] incremented S scene to 308 completed views
[Sequencer 17:10:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:10:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:10:00 INFO] incremented to [AERI set: name T308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:10:00 INFO] S308.SIG(18)
[sigmove 17:10:00 DEBUG] transformed S308Ma.SPC -> S308MA.SPC
[sigmove 17:10:00 DEBUG] transformed S308Mb.SPC -> S308MB.SPC
[sigmove 17:10:00 DEBUG] transformed S308Mc.SPC -> S308MC.SPC
[sigmove 17:10:00 DEBUG] transformed S308Md.SPC -> S308MD.SPC
[sigmove 17:10:00 DEBUG] transformed S308Me.SPC -> S308ME.SPC
[sigmove 17:10:00 DEBUG] transformed S308Mf.SPC -> S308MF.SPC
[Status 17:10:00 INFO] data for S308 transferred to science data processing
[Tidy 17:10:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:10:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:10:00 INFO] resetting WatchDogTimer
[Status 17:10:00 INFO] Starting Set [AERI set: name T308, 6 scans, 0 angle, D16300 command]
[Ingest 17:10:00 INFO] Sending XML status message
[Status 17:10:01 INFO] Mirror angle: 0
[Mirror 17:10:01 INFO] rotating to position T
[Status 17:10:01 INFO] .SET file for ACQ96 ready
[Ingest 17:10:02 INFO] Starting acquisition
[Status 17:10:02 INFO] reading housekeeping
[Status 17:10:19 INFO] acquire complete
[Status 17:10:20 INFO] writing housekeeping
[Sequencer 17:10:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:10:20 INFO] incremented T scene to 308 completed views
[Sequencer 17:10:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:10:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:10:20 INFO] incremented to [AERI set: name U308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:10:20 INFO] T308.SIG(18)
[sigmove 17:10:20 DEBUG] transformed T308Ma.SPC -> T308MA.SPC
[sigmove 17:10:20 DEBUG] transformed T308Mb.SPC -> T308MB.SPC
[sigmove 17:10:20 DEBUG] transformed T308Mc.SPC -> T308MC.SPC
[sigmove 17:10:20 DEBUG] transformed T308Md.SPC -> T308MD.SPC
[sigmove 17:10:20 DEBUG] transformed T308Me.SPC -> T308ME.SPC
[sigmove 17:10:20 DEBUG] transformed T308Mf.SPC -> T308MF.SPC
[Status 17:10:20 INFO] data for T308 transferred to science data processing
[Tidy 17:10:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:10:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:10:20 INFO] resetting WatchDogTimer
[Status 17:10:21 INFO] Starting Set [AERI set: name U308, 6 scans, 0 angle, D16300 command]
[Ingest 17:10:21 INFO] Sending XML status message
[Status 17:10:21 INFO] Mirror angle: 0
[Mirror 17:10:21 INFO] rotating to position U
[Status 17:10:22 INFO] .SET file for ACQ96 ready
[Ingest 17:10:22 INFO] Starting acquisition
[Status 17:10:23 INFO] reading housekeeping
[Status 17:10:41 INFO] acquire complete
[Status 17:10:42 INFO] writing housekeeping
[Sequencer 17:10:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:10:42 INFO] incremented U scene to 308 completed views
[Sequencer 17:10:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:10:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:10:42 INFO] incremented to [AERI set: name V308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:10:42 INFO] U308.SIG(18)
[sigmove 17:10:42 DEBUG] transformed U308Ma.SPC -> U308MA.SPC
[sigmove 17:10:42 DEBUG] transformed U308Mb.SPC -> U308MB.SPC
[sigmove 17:10:42 DEBUG] transformed U308Mc.SPC -> U308MC.SPC
[sigmove 17:10:42 DEBUG] transformed U308Md.SPC -> U308MD.SPC
[sigmove 17:10:42 DEBUG] transformed U308Me.SPC -> U308ME.SPC
[sigmove 17:10:42 DEBUG] transformed U308Mf.SPC -> U308MF.SPC
[Status 17:10:42 INFO] data for U308 transferred to science data processing
[Tidy 17:10:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:10:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:10:42 INFO] resetting WatchDogTimer
[Status 17:10:42 INFO] Starting Set [AERI set: name V308, 6 scans, 0 angle, D16300 command]
[Ingest 17:10:42 INFO] Sending XML status message
[Status 17:10:42 INFO] Mirror angle: 0
[Mirror 17:10:42 INFO] rotating to position V
[Status 17:10:43 INFO] .SET file for ACQ96 ready
[Ingest 17:10:43 INFO] Starting acquisition
[Status 17:10:44 INFO] reading housekeeping
[Status 17:11:01 INFO] acquire complete
[Status 17:11:02 INFO] writing housekeeping
[Sequencer 17:11:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:11:02 INFO] incremented V scene to 308 completed views
[Sequencer 17:11:02 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:11:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:11:02 INFO] incremented to [AERI set: name W308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:11:02 INFO] V308.SIG(18)
[sigmove 17:11:02 DEBUG] transformed V308Ma.SPC -> V308MA.SPC
[sigmove 17:11:02 DEBUG] transformed V308Mb.SPC -> V308MB.SPC
[sigmove 17:11:02 DEBUG] transformed V308Mc.SPC -> V308MC.SPC
[sigmove 17:11:02 DEBUG] transformed V308Md.SPC -> V308MD.SPC
[sigmove 17:11:02 DEBUG] transformed V308Me.SPC -> V308ME.SPC
[sigmove 17:11:02 DEBUG] transformed V308Mf.SPC -> V308MF.SPC
[Status 17:11:02 INFO] data for V308 transferred to science data processing
[Tidy 17:11:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:11:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:11:02 INFO] resetting WatchDogTimer
[Status 17:11:02 INFO] Starting Set [AERI set: name W308, 6 scans, 0 angle, D16300 command]
[Ingest 17:11:02 INFO] Sending XML status message
[Status 17:11:02 INFO] Mirror angle: 0
[Mirror 17:11:03 INFO] rotating to position W
[Status 17:11:03 INFO] .SET file for ACQ96 ready
[Ingest 17:11:03 INFO] Starting acquisition
[Status 17:11:04 INFO] reading housekeeping
[Status 17:11:21 INFO] acquire complete
[Status 17:11:22 INFO] writing housekeeping
[Sequencer 17:11:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:11:22 INFO] incremented W scene to 308 completed views
[Sequencer 17:11:22 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:11:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:11:22 INFO] incremented to [AERI set: name X308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:11:22 INFO] W308.SIG(18)
[sigmove 17:11:22 DEBUG] transformed W308Ma.SPC -> W308MA.SPC
[sigmove 17:11:22 DEBUG] transformed W308Mb.SPC -> W308MB.SPC
[sigmove 17:11:22 DEBUG] transformed W308Mc.SPC -> W308MC.SPC
[sigmove 17:11:22 DEBUG] transformed W308Md.SPC -> W308MD.SPC
[sigmove 17:11:22 DEBUG] transformed W308Me.SPC -> W308ME.SPC
[sigmove 17:11:22 DEBUG] transformed W308Mf.SPC -> W308MF.SPC
[Status 17:11:22 INFO] data for W308 transferred to science data processing
[Tidy 17:11:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:11:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:11:22 INFO] resetting WatchDogTimer
[Status 17:11:22 INFO] Starting Set [AERI set: name X308, 6 scans, 0 angle, D16300 command]
[Ingest 17:11:22 INFO] Sending XML status message
[Status 17:11:22 INFO] Mirror angle: 0
[Mirror 17:11:23 INFO] rotating to position X
[Status 17:11:23 INFO] .SET file for ACQ96 ready
[Ingest 17:11:24 INFO] Starting acquisition
[Status 17:11:24 INFO] reading housekeeping
[Status 17:11:42 INFO] acquire complete
[Status 17:11:43 INFO] writing housekeeping
[Sequencer 17:11:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:11:43 INFO] incremented X scene to 308 completed views
[Sequencer 17:11:43 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:11:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:11:43 INFO] incremented to [AERI set: name Y308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:11:43 INFO] X308.SIG(18)
[sigmove 17:11:43 DEBUG] transformed X308Ma.SPC -> X308MA.SPC
[sigmove 17:11:43 DEBUG] transformed X308Mb.SPC -> X308MB.SPC
[sigmove 17:11:43 DEBUG] transformed X308Mc.SPC -> X308MC.SPC
[sigmove 17:11:43 DEBUG] transformed X308Md.SPC -> X308MD.SPC
[sigmove 17:11:43 DEBUG] transformed X308Me.SPC -> X308ME.SPC
[sigmove 17:11:43 DEBUG] transformed X308Mf.SPC -> X308MF.SPC
[Status 17:11:43 INFO] data for X308 transferred to science data processing
[Tidy 17:11:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:11:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:11:43 INFO] resetting WatchDogTimer
[Status 17:11:44 INFO] Starting Set [AERI set: name Y308, 6 scans, 0 angle, D16300 command]
[Ingest 17:11:44 INFO] Sending XML status message
[Status 17:11:44 INFO] Mirror angle: 0
[Mirror 17:11:44 INFO] rotating to position Y
[Status 17:11:45 INFO] .SET file for ACQ96 ready
[Ingest 17:11:45 INFO] Starting acquisition
[Status 17:11:45 INFO] reading housekeeping
[Status 17:12:04 INFO] acquire complete
[Status 17:12:05 INFO] writing housekeeping
[Sequencer 17:12:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:12:05 INFO] incremented Y scene to 308 completed views
[Sequencer 17:12:05 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:12:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:12:05 INFO] incremented to [AERI set: name Z308, 6 scans, 0 angle, D16300 command] set
[sigmove 17:12:05 INFO] Y308.SIG(18)
[sigmove 17:12:05 DEBUG] transformed Y308Ma.SPC -> Y308MA.SPC
[sigmove 17:12:05 DEBUG] transformed Y308Mb.SPC -> Y308MB.SPC
[sigmove 17:12:05 DEBUG] transformed Y308Mc.SPC -> Y308MC.SPC
[sigmove 17:12:05 DEBUG] transformed Y308Md.SPC -> Y308MD.SPC
[sigmove 17:12:05 DEBUG] transformed Y308Me.SPC -> Y308ME.SPC
[sigmove 17:12:05 DEBUG] transformed Y308Mf.SPC -> Y308MF.SPC
[Status 17:12:05 INFO] data for Y308 transferred to science data processing
[Tidy 17:12:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:12:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:12:05 INFO] resetting WatchDogTimer
[Status 17:12:05 INFO] Starting Set [AERI set: name Z308, 6 scans, 0 angle, D16300 command]
[Ingest 17:12:05 INFO] Sending XML status message
[Status 17:12:05 INFO] Mirror angle: 0
[Mirror 17:12:05 INFO] rotating to position Z
[Status 17:12:06 INFO] .SET file for ACQ96 ready
[Ingest 17:12:06 INFO] Starting acquisition
[Status 17:12:07 INFO] reading housekeeping
[Status 17:12:24 INFO] acquire complete
[Status 17:12:25 INFO] writing housekeeping
[Sequencer 17:12:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:12:25 INFO] incremented Z scene to 308 completed views
[Sequencer 17:12:25 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:12:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:12:25 INFO] incremented to [AERI set: name H309, 6 scans, 60 angle, D22500 command] set
[sigmove 17:12:25 INFO] Z308.SIG(18)
[sigmove 17:12:25 DEBUG] transformed Z308Ma.SPC -> Z308MA.SPC
[sigmove 17:12:25 DEBUG] transformed Z308Mb.SPC -> Z308MB.SPC
[sigmove 17:12:25 DEBUG] transformed Z308Mc.SPC -> Z308MC.SPC
[sigmove 17:12:25 DEBUG] transformed Z308Md.SPC -> Z308MD.SPC
[sigmove 17:12:25 DEBUG] transformed Z308Me.SPC -> Z308ME.SPC
[sigmove 17:12:25 DEBUG] transformed Z308Mf.SPC -> Z308MF.SPC
[Status 17:12:25 INFO] data for Z308 transferred to science data processing
[Tidy 17:12:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:12:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:12:25 INFO] resetting WatchDogTimer
[Status 17:12:25 INFO] Starting Set [AERI set: name H309, 6 scans, 60 angle, D22500 command]
[Ingest 17:12:25 INFO] Sending XML status message
[Status 17:12:25 INFO] Mirror angle: 60
[Mirror 17:12:26 INFO] rotating to position H
[Status 17:12:27 INFO] .SET file for ACQ96 ready
[Ingest 17:12:27 INFO] Starting acquisition
[Status 17:12:27 INFO] reading housekeeping
[Status 17:12:45 INFO] acquire complete
[Status 17:12:46 INFO] writing housekeeping
[Sequencer 17:12:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:12:46 INFO] incremented H scene to 309 completed views
[Sequencer 17:12:46 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:12:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:12:46 INFO] incremented to [AERI set: name A309, 6 scans, 120 angle, D28300 command] set
[sigmove 17:12:46 INFO] H309.SIG(18)
[sigmove 17:12:46 DEBUG] transformed H309Ma.SPC -> H309MA.SPC
[sigmove 17:12:46 DEBUG] transformed H309Mb.SPC -> H309MB.SPC
[sigmove 17:12:46 DEBUG] transformed H309Mc.SPC -> H309MC.SPC
[sigmove 17:12:46 DEBUG] transformed H309Md.SPC -> H309MD.SPC
[sigmove 17:12:46 DEBUG] transformed H309Me.SPC -> H309ME.SPC
[sigmove 17:12:46 DEBUG] transformed H309Mf.SPC -> H309MF.SPC
[Status 17:12:46 INFO] data for H309 transferred to science data processing
[Tidy 17:12:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:12:46 INFO] A307.FIN(19),H307.FIN(19),S307.FIN(19),T307.FIN(19),U307.FIN(19),V307.FIN(19),W307.FIN(19),X307.FIN(19),Y307.FIN(19),Z307.FIN(19),A308.FIN(19),H308.FIN(19),S308.FIN(19),T308.FIN(19),U308.FIN(19),V308.FIN(19),W308.FIN(19),X308.FIN(19),Y308.FIN(19),Z308.FIN(19)
[sigmove 17:12:46 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:12:46 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:12:52 DEBUG] done zipping
[WatchDog 17:12:52 INFO] resetting WatchDogTimer
[Status 17:12:52 INFO] Starting Set [AERI set: name A309, 6 scans, 120 angle, D28300 command]
[Ingest 17:12:52 INFO] Sending XML status message
[Status 17:12:52 INFO] Mirror angle: 120
[Mirror 17:12:53 INFO] rotating to position A
[Status 17:12:54 INFO] .SET file for ACQ96 ready
[Ingest 17:12:54 INFO] Starting acquisition
[Status 17:12:54 INFO] reading housekeeping
[Status 17:13:12 INFO] acquire complete
[Status 17:13:13 INFO] writing housekeeping
[Sequencer 17:13:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:13:13 INFO] incremented A scene to 309 completed views
[Sequencer 17:13:13 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:13:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:13:13 INFO] incremented to [AERI set: name S309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:13:13 INFO] A309.SIG(18)
[sigmove 17:13:13 DEBUG] transformed A309Ma.SPC -> A309MA.SPC
[sigmove 17:13:13 DEBUG] transformed A309Mb.SPC -> A309MB.SPC
[sigmove 17:13:13 DEBUG] transformed A309Mc.SPC -> A309MC.SPC
[sigmove 17:13:13 DEBUG] transformed A309Md.SPC -> A309MD.SPC
[sigmove 17:13:13 DEBUG] transformed A309Me.SPC -> A309ME.SPC
[sigmove 17:13:13 DEBUG] transformed A309Mf.SPC -> A309MF.SPC
[Status 17:13:13 INFO] data for A309 transferred to science data processing
[Tidy 17:13:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:13:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:13:13 INFO] resetting WatchDogTimer
[Status 17:13:13 INFO] Starting Set [AERI set: name S309, 6 scans, 0 angle, D16300 command]
[Ingest 17:13:13 INFO] Sending XML status message
[Status 17:13:13 INFO] Mirror angle: 0
[Mirror 17:13:14 INFO] rotating to position S
[Status 17:13:15 INFO] .SET file for ACQ96 ready
[Ingest 17:13:16 INFO] Starting acquisition
[Status 17:13:16 INFO] reading housekeeping
[Status 17:13:33 INFO] acquire complete
[Status 17:13:34 INFO] writing housekeeping
[Sequencer 17:13:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:13:34 INFO] incremented S scene to 309 completed views
[Sequencer 17:13:34 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:13:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:13:35 INFO] incremented to [AERI set: name T309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:13:35 INFO] S309.SIG(18)
[sigmove 17:13:35 DEBUG] transformed S309Ma.SPC -> S309MA.SPC
[sigmove 17:13:35 DEBUG] transformed S309Mb.SPC -> S309MB.SPC
[sigmove 17:13:35 DEBUG] transformed S309Mc.SPC -> S309MC.SPC
[sigmove 17:13:35 DEBUG] transformed S309Md.SPC -> S309MD.SPC
[sigmove 17:13:35 DEBUG] transformed S309Me.SPC -> S309ME.SPC
[sigmove 17:13:35 DEBUG] transformed S309Mf.SPC -> S309MF.SPC
[Status 17:13:35 INFO] data for S309 transferred to science data processing
[Tidy 17:13:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:13:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:13:35 INFO] resetting WatchDogTimer
[Status 17:13:35 INFO] Starting Set [AERI set: name T309, 6 scans, 0 angle, D16300 command]
[Ingest 17:13:35 INFO] Sending XML status message
[Status 17:13:35 INFO] Mirror angle: 0
[Mirror 17:13:35 INFO] rotating to position T
[Status 17:13:36 INFO] .SET file for ACQ96 ready
[Ingest 17:13:36 INFO] Starting acquisition
[Status 17:13:37 INFO] reading housekeeping
[Status 17:13:55 INFO] acquire complete
[Status 17:13:56 INFO] writing housekeeping
[Sequencer 17:13:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:13:56 INFO] incremented T scene to 309 completed views
[Sequencer 17:13:56 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:13:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:13:56 INFO] incremented to [AERI set: name U309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:13:56 INFO] T309.SIG(18)
[sigmove 17:13:56 DEBUG] transformed T309Ma.SPC -> T309MA.SPC
[sigmove 17:13:56 DEBUG] transformed T309Mb.SPC -> T309MB.SPC
[sigmove 17:13:56 DEBUG] transformed T309Mc.SPC -> T309MC.SPC
[sigmove 17:13:56 DEBUG] transformed T309Md.SPC -> T309MD.SPC
[sigmove 17:13:56 DEBUG] transformed T309Me.SPC -> T309ME.SPC
[sigmove 17:13:56 DEBUG] transformed T309Mf.SPC -> T309MF.SPC
[Status 17:13:56 INFO] data for T309 transferred to science data processing
[Tidy 17:13:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:13:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:13:56 INFO] resetting WatchDogTimer
[Status 17:13:56 INFO] Starting Set [AERI set: name U309, 6 scans, 0 angle, D16300 command]
[Ingest 17:13:56 INFO] Sending XML status message
[Status 17:13:56 INFO] Mirror angle: 0
[Mirror 17:13:56 INFO] rotating to position U
[Status 17:13:57 INFO] .SET file for ACQ96 ready
[Ingest 17:13:57 INFO] Starting acquisition
[Status 17:13:58 INFO] reading housekeeping
[Status 17:14:16 INFO] acquire complete
[Status 17:14:17 INFO] writing housekeeping
[Sequencer 17:14:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:14:17 INFO] incremented U scene to 309 completed views
[Sequencer 17:14:17 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:14:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:14:17 INFO] incremented to [AERI set: name V309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:14:17 INFO] U309.SIG(18)
[sigmove 17:14:17 DEBUG] transformed U309Ma.SPC -> U309MA.SPC
[sigmove 17:14:17 DEBUG] transformed U309Mb.SPC -> U309MB.SPC
[sigmove 17:14:17 DEBUG] transformed U309Mc.SPC -> U309MC.SPC
[sigmove 17:14:17 DEBUG] transformed U309Md.SPC -> U309MD.SPC
[sigmove 17:14:17 DEBUG] transformed U309Me.SPC -> U309ME.SPC
[sigmove 17:14:17 DEBUG] transformed U309Mf.SPC -> U309MF.SPC
[Status 17:14:17 INFO] data for U309 transferred to science data processing
[Tidy 17:14:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:14:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:14:17 INFO] resetting WatchDogTimer
[Status 17:14:17 INFO] Starting Set [AERI set: name V309, 6 scans, 0 angle, D16300 command]
[Ingest 17:14:17 INFO] Sending XML status message
[Status 17:14:17 INFO] Mirror angle: 0
[Mirror 17:14:18 INFO] rotating to position V
[Status 17:14:18 INFO] .SET file for ACQ96 ready
[Ingest 17:14:19 INFO] Starting acquisition
[Status 17:14:19 INFO] reading housekeeping
[Status 17:14:37 INFO] acquire complete
[Status 17:14:38 INFO] writing housekeeping
[Sequencer 17:14:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:14:38 INFO] incremented V scene to 309 completed views
[Sequencer 17:14:38 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:14:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:14:38 INFO] incremented to [AERI set: name W309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:14:38 INFO] V309.SIG(18)
[sigmove 17:14:38 DEBUG] transformed V309Ma.SPC -> V309MA.SPC
[sigmove 17:14:38 DEBUG] transformed V309Mb.SPC -> V309MB.SPC
[sigmove 17:14:38 DEBUG] transformed V309Mc.SPC -> V309MC.SPC
[sigmove 17:14:38 DEBUG] transformed V309Md.SPC -> V309MD.SPC
[sigmove 17:14:38 DEBUG] transformed V309Me.SPC -> V309ME.SPC
[sigmove 17:14:38 DEBUG] transformed V309Mf.SPC -> V309MF.SPC
[Status 17:14:38 INFO] data for V309 transferred to science data processing
[Tidy 17:14:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:14:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:14:38 INFO] resetting WatchDogTimer
[Status 17:14:39 INFO] Starting Set [AERI set: name W309, 6 scans, 0 angle, D16300 command]
[Ingest 17:14:39 INFO] Sending XML status message
[Status 17:14:39 INFO] Mirror angle: 0
[Mirror 17:14:39 INFO] rotating to position W
[Status 17:14:40 INFO] .SET file for ACQ96 ready
[Ingest 17:14:40 INFO] Starting acquisition
[Status 17:14:40 INFO] reading housekeeping
[Status 17:14:57 INFO] acquire complete
[Status 17:14:58 INFO] writing housekeeping
[Sequencer 17:14:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:14:58 INFO] incremented W scene to 309 completed views
[Sequencer 17:14:58 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:14:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:14:58 INFO] incremented to [AERI set: name X309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:14:58 INFO] W309.SIG(18)
[sigmove 17:14:58 DEBUG] transformed W309Ma.SPC -> W309MA.SPC
[sigmove 17:14:58 DEBUG] transformed W309Mb.SPC -> W309MB.SPC
[sigmove 17:14:58 DEBUG] transformed W309Mc.SPC -> W309MC.SPC
[sigmove 17:14:58 DEBUG] transformed W309Md.SPC -> W309MD.SPC
[sigmove 17:14:58 DEBUG] transformed W309Me.SPC -> W309ME.SPC
[sigmove 17:14:58 DEBUG] transformed W309Mf.SPC -> W309MF.SPC
[Status 17:14:58 INFO] data for W309 transferred to science data processing
[Tidy 17:14:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:14:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:14:58 INFO] resetting WatchDogTimer
[Status 17:14:59 INFO] Starting Set [AERI set: name X309, 6 scans, 0 angle, D16300 command]
[Ingest 17:14:59 INFO] Sending XML status message
[Status 17:14:59 INFO] Mirror angle: 0
[Mirror 17:14:59 INFO] rotating to position X
[Status 17:15:00 INFO] .SET file for ACQ96 ready
[Ingest 17:15:00 INFO] Starting acquisition
[Status 17:15:00 INFO] reading housekeeping
[Status 17:15:18 INFO] acquire complete
[Status 17:15:19 INFO] writing housekeeping
[Sequencer 17:15:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:15:19 INFO] incremented X scene to 309 completed views
[Sequencer 17:15:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:15:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:15:19 INFO] incremented to [AERI set: name Y309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:15:19 INFO] X309.SIG(18)
[sigmove 17:15:19 DEBUG] transformed X309Ma.SPC -> X309MA.SPC
[sigmove 17:15:19 DEBUG] transformed X309Mb.SPC -> X309MB.SPC
[sigmove 17:15:19 DEBUG] transformed X309Mc.SPC -> X309MC.SPC
[sigmove 17:15:19 DEBUG] transformed X309Md.SPC -> X309MD.SPC
[sigmove 17:15:19 DEBUG] transformed X309Me.SPC -> X309ME.SPC
[sigmove 17:15:19 DEBUG] transformed X309Mf.SPC -> X309MF.SPC
[Status 17:15:19 INFO] data for X309 transferred to science data processing
[Tidy 17:15:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:15:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:15:19 INFO] resetting WatchDogTimer
[Status 17:15:19 INFO] Starting Set [AERI set: name Y309, 6 scans, 0 angle, D16300 command]
[Ingest 17:15:19 INFO] Sending XML status message
[Status 17:15:19 INFO] Mirror angle: 0
[Mirror 17:15:19 INFO] rotating to position Y
[Status 17:15:20 INFO] .SET file for ACQ96 ready
[Ingest 17:15:20 INFO] Starting acquisition
[Status 17:15:21 INFO] reading housekeeping
[Status 17:15:38 INFO] acquire complete
[Status 17:15:39 INFO] writing housekeeping
[Sequencer 17:15:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:15:39 INFO] incremented Y scene to 309 completed views
[Sequencer 17:15:39 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:15:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:15:39 INFO] incremented to [AERI set: name Z309, 6 scans, 0 angle, D16300 command] set
[sigmove 17:15:39 INFO] Y309.SIG(18)
[sigmove 17:15:39 DEBUG] transformed Y309Ma.SPC -> Y309MA.SPC
[sigmove 17:15:39 DEBUG] transformed Y309Mb.SPC -> Y309MB.SPC
[sigmove 17:15:39 DEBUG] transformed Y309Mc.SPC -> Y309MC.SPC
[sigmove 17:15:39 DEBUG] transformed Y309Md.SPC -> Y309MD.SPC
[sigmove 17:15:39 DEBUG] transformed Y309Me.SPC -> Y309ME.SPC
[sigmove 17:15:39 DEBUG] transformed Y309Mf.SPC -> Y309MF.SPC
[Status 17:15:39 INFO] data for Y309 transferred to science data processing
[Tidy 17:15:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:15:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:15:39 INFO] resetting WatchDogTimer
[Status 17:15:39 INFO] Starting Set [AERI set: name Z309, 6 scans, 0 angle, D16300 command]
[Ingest 17:15:39 INFO] Sending XML status message
[Status 17:15:39 INFO] Mirror angle: 0
[Mirror 17:15:40 INFO] rotating to position Z
[Status 17:15:40 INFO] .SET file for ACQ96 ready
[Ingest 17:15:40 INFO] Starting acquisition
[Status 17:15:41 INFO] reading housekeeping
[Status 17:15:59 INFO] acquire complete
[Status 17:16:00 INFO] writing housekeeping
[Sequencer 17:16:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:16:00 INFO] incremented Z scene to 309 completed views
[Sequencer 17:16:00 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:16:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:16:00 INFO] incremented to [AERI set: name A310, 6 scans, 120 angle, D28300 command] set
[sigmove 17:16:00 INFO] Z309.SIG(18)
[sigmove 17:16:00 DEBUG] transformed Z309Ma.SPC -> Z309MA.SPC
[sigmove 17:16:00 DEBUG] transformed Z309Mb.SPC -> Z309MB.SPC
[sigmove 17:16:00 DEBUG] transformed Z309Mc.SPC -> Z309MC.SPC
[sigmove 17:16:00 DEBUG] transformed Z309Md.SPC -> Z309MD.SPC
[sigmove 17:16:00 DEBUG] transformed Z309Me.SPC -> Z309ME.SPC
[sigmove 17:16:00 DEBUG] transformed Z309Mf.SPC -> Z309MF.SPC
[Status 17:16:00 INFO] data for Z309 transferred to science data processing
[Tidy 17:16:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:16:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:16:00 INFO] resetting WatchDogTimer
[Status 17:16:01 INFO] Starting Set [AERI set: name A310, 6 scans, 120 angle, D28300 command]
[Ingest 17:16:01 INFO] Sending XML status message
[Status 17:16:01 INFO] Mirror angle: 120
[Mirror 17:16:01 INFO] rotating to position A
[Status 17:16:02 INFO] .SET file for ACQ96 ready
[Ingest 17:16:03 INFO] Starting acquisition
[Status 17:16:03 INFO] reading housekeeping
[Status 17:16:20 INFO] acquire complete
[Status 17:16:21 INFO] writing housekeeping
[Sequencer 17:16:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:16:21 INFO] incremented A scene to 310 completed views
[Sequencer 17:16:21 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:16:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:16:21 INFO] incremented to [AERI set: name H310, 6 scans, 60 angle, D22500 command] set
[sigmove 17:16:21 INFO] A310.SIG(18)
[sigmove 17:16:21 DEBUG] transformed A310Ma.SPC -> A310MA.SPC
[sigmove 17:16:21 DEBUG] transformed A310Mb.SPC -> A310MB.SPC
[sigmove 17:16:21 DEBUG] transformed A310Mc.SPC -> A310MC.SPC
[sigmove 17:16:21 DEBUG] transformed A310Md.SPC -> A310MD.SPC
[sigmove 17:16:21 DEBUG] transformed A310Me.SPC -> A310ME.SPC
[sigmove 17:16:21 DEBUG] transformed A310Mf.SPC -> A310MF.SPC
[Status 17:16:21 INFO] data for A310 transferred to science data processing
[Tidy 17:16:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:16:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:16:21 INFO] resetting WatchDogTimer
[Status 17:16:22 INFO] Starting Set [AERI set: name H310, 6 scans, 60 angle, D22500 command]
[Ingest 17:16:22 INFO] Sending XML status message
[Status 17:16:22 INFO] Mirror angle: 60
[Mirror 17:16:22 INFO] rotating to position H
[Status 17:16:23 INFO] .SET file for ACQ96 ready
[Ingest 17:16:24 INFO] Starting acquisition
[Status 17:16:24 INFO] reading housekeeping
[Status 17:16:42 INFO] acquire complete
[Status 17:16:43 INFO] writing housekeeping
[Sequencer 17:16:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:16:43 INFO] incremented H scene to 310 completed views
[Sequencer 17:16:43 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:16:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:16:43 INFO] incremented to [AERI set: name S310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:16:43 INFO] H310.SIG(18)
[sigmove 17:16:43 DEBUG] transformed H310Ma.SPC -> H310MA.SPC
[sigmove 17:16:43 DEBUG] transformed H310Mb.SPC -> H310MB.SPC
[sigmove 17:16:43 DEBUG] transformed H310Mc.SPC -> H310MC.SPC
[sigmove 17:16:43 DEBUG] transformed H310Md.SPC -> H310MD.SPC
[sigmove 17:16:43 DEBUG] transformed H310Me.SPC -> H310ME.SPC
[sigmove 17:16:43 DEBUG] transformed H310Mf.SPC -> H310MF.SPC
[Status 17:16:43 INFO] data for H310 transferred to science data processing
[Tidy 17:16:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:16:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:16:43 INFO] resetting WatchDogTimer
[Status 17:16:43 INFO] Starting Set [AERI set: name S310, 6 scans, 0 angle, D16300 command]
[Ingest 17:16:43 INFO] Sending XML status message
[Status 17:16:43 INFO] Mirror angle: 0
[Mirror 17:16:44 INFO] rotating to position S
[Status 17:16:45 INFO] .SET file for ACQ96 ready
[Ingest 17:16:45 INFO] Starting acquisition
[Status 17:16:45 INFO] reading housekeeping
[Status 17:17:03 INFO] acquire complete
[Status 17:17:04 INFO] writing housekeeping
[Sequencer 17:17:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:17:04 INFO] incremented S scene to 310 completed views
[Sequencer 17:17:04 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:17:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:17:04 INFO] incremented to [AERI set: name T310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:17:04 INFO] S310.SIG(18)
[sigmove 17:17:04 DEBUG] transformed S310Ma.SPC -> S310MA.SPC
[sigmove 17:17:04 DEBUG] transformed S310Mb.SPC -> S310MB.SPC
[sigmove 17:17:04 DEBUG] transformed S310Mc.SPC -> S310MC.SPC
[sigmove 17:17:04 DEBUG] transformed S310Md.SPC -> S310MD.SPC
[sigmove 17:17:04 DEBUG] transformed S310Me.SPC -> S310ME.SPC
[sigmove 17:17:04 DEBUG] transformed S310Mf.SPC -> S310MF.SPC
[Status 17:17:04 INFO] data for S310 transferred to science data processing
[Tidy 17:17:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:17:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:17:04 INFO] resetting WatchDogTimer
[Status 17:17:04 INFO] Starting Set [AERI set: name T310, 6 scans, 0 angle, D16300 command]
[Ingest 17:17:04 INFO] Sending XML status message
[Status 17:17:04 INFO] Mirror angle: 0
[Mirror 17:17:05 INFO] rotating to position T
[Status 17:17:05 INFO] .SET file for ACQ96 ready
[Ingest 17:17:06 INFO] Starting acquisition
[Status 17:17:06 INFO] reading housekeeping
[Status 17:17:24 INFO] acquire complete
[Status 17:17:25 INFO] writing housekeeping
[Sequencer 17:17:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:17:25 INFO] incremented T scene to 310 completed views
[Sequencer 17:17:25 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:17:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:17:25 INFO] incremented to [AERI set: name U310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:17:25 INFO] T310.SIG(18)
[sigmove 17:17:25 DEBUG] transformed T310Ma.SPC -> T310MA.SPC
[sigmove 17:17:25 DEBUG] transformed T310Mb.SPC -> T310MB.SPC
[sigmove 17:17:25 DEBUG] transformed T310Mc.SPC -> T310MC.SPC
[sigmove 17:17:25 DEBUG] transformed T310Md.SPC -> T310MD.SPC
[sigmove 17:17:25 DEBUG] transformed T310Me.SPC -> T310ME.SPC
[sigmove 17:17:25 DEBUG] transformed T310Mf.SPC -> T310MF.SPC
[Status 17:17:25 INFO] data for T310 transferred to science data processing
[Tidy 17:17:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:17:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:17:25 INFO] resetting WatchDogTimer
[Status 17:17:26 INFO] Starting Set [AERI set: name U310, 6 scans, 0 angle, D16300 command]
[Ingest 17:17:26 INFO] Sending XML status message
[Status 17:17:26 INFO] Mirror angle: 0
[Mirror 17:17:26 INFO] rotating to position U
[Status 17:17:27 INFO] .SET file for ACQ96 ready
[Ingest 17:17:27 INFO] Starting acquisition
[Status 17:17:28 INFO] reading housekeeping
[Status 17:17:46 INFO] acquire complete
[Status 17:17:47 INFO] writing housekeeping
[Sequencer 17:17:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:17:47 INFO] incremented U scene to 310 completed views
[Sequencer 17:17:47 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:17:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:17:47 INFO] incremented to [AERI set: name V310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:17:47 INFO] U310.SIG(18)
[sigmove 17:17:47 DEBUG] transformed U310Ma.SPC -> U310MA.SPC
[sigmove 17:17:47 DEBUG] transformed U310Mb.SPC -> U310MB.SPC
[sigmove 17:17:47 DEBUG] transformed U310Mc.SPC -> U310MC.SPC
[sigmove 17:17:47 DEBUG] transformed U310Md.SPC -> U310MD.SPC
[sigmove 17:17:47 DEBUG] transformed U310Me.SPC -> U310ME.SPC
[sigmove 17:17:47 DEBUG] transformed U310Mf.SPC -> U310MF.SPC
[Status 17:17:47 INFO] data for U310 transferred to science data processing
[Tidy 17:17:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:17:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:17:47 INFO] resetting WatchDogTimer
[Status 17:17:47 INFO] Starting Set [AERI set: name V310, 6 scans, 0 angle, D16300 command]
[Ingest 17:17:47 INFO] Sending XML status message
[Status 17:17:47 INFO] Mirror angle: 0
[Mirror 17:17:48 INFO] rotating to position V
[Status 17:17:48 INFO] .SET file for ACQ96 ready
[Ingest 17:17:48 INFO] Starting acquisition
[Status 17:17:49 INFO] reading housekeeping
[Status 17:18:07 INFO] acquire complete
[Status 17:18:08 INFO] writing housekeeping
[Sequencer 17:18:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:18:08 INFO] incremented V scene to 310 completed views
[Sequencer 17:18:08 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:18:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:18:08 INFO] incremented to [AERI set: name W310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:18:08 INFO] V310.SIG(18)
[sigmove 17:18:08 DEBUG] transformed V310Ma.SPC -> V310MA.SPC
[sigmove 17:18:08 DEBUG] transformed V310Mb.SPC -> V310MB.SPC
[sigmove 17:18:08 DEBUG] transformed V310Mc.SPC -> V310MC.SPC
[sigmove 17:18:08 DEBUG] transformed V310Md.SPC -> V310MD.SPC
[sigmove 17:18:08 DEBUG] transformed V310Me.SPC -> V310ME.SPC
[sigmove 17:18:08 DEBUG] transformed V310Mf.SPC -> V310MF.SPC
[Status 17:18:08 INFO] data for V310 transferred to science data processing
[Tidy 17:18:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:18:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:18:08 INFO] resetting WatchDogTimer
[Status 17:18:08 INFO] Starting Set [AERI set: name W310, 6 scans, 0 angle, D16300 command]
[Ingest 17:18:08 INFO] Sending XML status message
[Status 17:18:08 INFO] Mirror angle: 0
[Mirror 17:18:09 INFO] rotating to position W
[Status 17:18:09 INFO] .SET file for ACQ96 ready
[Ingest 17:18:10 INFO] Starting acquisition
[Status 17:18:10 INFO] reading housekeeping
[Status 17:18:27 INFO] acquire complete
[Status 17:18:28 INFO] writing housekeeping
[Sequencer 17:18:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:18:28 INFO] incremented W scene to 310 completed views
[Sequencer 17:18:28 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:18:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:18:28 INFO] incremented to [AERI set: name X310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:18:28 INFO] W310.SIG(18)
[sigmove 17:18:28 DEBUG] transformed W310Ma.SPC -> W310MA.SPC
[sigmove 17:18:28 DEBUG] transformed W310Mb.SPC -> W310MB.SPC
[sigmove 17:18:28 DEBUG] transformed W310Mc.SPC -> W310MC.SPC
[sigmove 17:18:28 DEBUG] transformed W310Md.SPC -> W310MD.SPC
[sigmove 17:18:28 DEBUG] transformed W310Me.SPC -> W310ME.SPC
[sigmove 17:18:28 DEBUG] transformed W310Mf.SPC -> W310MF.SPC
[Status 17:18:28 INFO] data for W310 transferred to science data processing
[Tidy 17:18:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:18:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:18:28 INFO] resetting WatchDogTimer
[Status 17:18:29 INFO] Starting Set [AERI set: name X310, 6 scans, 0 angle, D16300 command]
[Ingest 17:18:29 INFO] Sending XML status message
[Status 17:18:29 INFO] Mirror angle: 0
[Mirror 17:18:29 INFO] rotating to position X
[Status 17:18:29 INFO] .SET file for ACQ96 ready
[Ingest 17:18:30 INFO] Starting acquisition
[Status 17:18:30 INFO] reading housekeeping
[Status 17:18:47 INFO] acquire complete
[Status 17:18:48 INFO] writing housekeeping
[Sequencer 17:18:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:18:48 INFO] incremented X scene to 310 completed views
[Sequencer 17:18:48 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:18:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:18:48 INFO] incremented to [AERI set: name Y310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:18:48 INFO] X310.SIG(18)
[sigmove 17:18:48 DEBUG] transformed X310Ma.SPC -> X310MA.SPC
[sigmove 17:18:48 DEBUG] transformed X310Mb.SPC -> X310MB.SPC
[sigmove 17:18:48 DEBUG] transformed X310Mc.SPC -> X310MC.SPC
[sigmove 17:18:48 DEBUG] transformed X310Md.SPC -> X310MD.SPC
[sigmove 17:18:48 DEBUG] transformed X310Me.SPC -> X310ME.SPC
[sigmove 17:18:48 DEBUG] transformed X310Mf.SPC -> X310MF.SPC
[Status 17:18:48 INFO] data for X310 transferred to science data processing
[Tidy 17:18:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:18:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:18:48 INFO] resetting WatchDogTimer
[Status 17:18:49 INFO] Starting Set [AERI set: name Y310, 6 scans, 0 angle, D16300 command]
[Ingest 17:18:49 INFO] Sending XML status message
[Status 17:18:49 INFO] Mirror angle: 0
[Mirror 17:18:49 INFO] rotating to position Y
[Status 17:18:50 INFO] .SET file for ACQ96 ready
[Ingest 17:18:50 INFO] Starting acquisition
[Status 17:18:50 INFO] reading housekeeping
[Status 17:19:08 INFO] acquire complete
[Status 17:19:09 INFO] writing housekeeping
[Sequencer 17:19:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:19:09 INFO] incremented Y scene to 310 completed views
[Sequencer 17:19:09 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:19:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:19:09 INFO] incremented to [AERI set: name Z310, 6 scans, 0 angle, D16300 command] set
[sigmove 17:19:09 INFO] Y310.SIG(18)
[sigmove 17:19:09 DEBUG] transformed Y310Ma.SPC -> Y310MA.SPC
[sigmove 17:19:09 DEBUG] transformed Y310Mb.SPC -> Y310MB.SPC
[sigmove 17:19:09 DEBUG] transformed Y310Mc.SPC -> Y310MC.SPC
[sigmove 17:19:09 DEBUG] transformed Y310Md.SPC -> Y310MD.SPC
[sigmove 17:19:09 DEBUG] transformed Y310Me.SPC -> Y310ME.SPC
[sigmove 17:19:09 DEBUG] transformed Y310Mf.SPC -> Y310MF.SPC
[Status 17:19:09 INFO] data for Y310 transferred to science data processing
[Tidy 17:19:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:19:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:19:09 INFO] resetting WatchDogTimer
[Status 17:19:09 INFO] Starting Set [AERI set: name Z310, 6 scans, 0 angle, D16300 command]
[Ingest 17:19:09 INFO] Sending XML status message
[Status 17:19:09 INFO] Mirror angle: 0
[Mirror 17:19:09 INFO] rotating to position Z
[Status 17:19:10 INFO] .SET file for ACQ96 ready
[Ingest 17:19:10 INFO] Starting acquisition
[Status 17:19:11 INFO] reading housekeeping
[Status 17:19:29 INFO] acquire complete
[Status 17:19:30 INFO] writing housekeeping
[Sequencer 17:19:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:19:30 INFO] incremented Z scene to 310 completed views
[Sequencer 17:19:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:19:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:19:30 INFO] incremented to [AERI set: name H311, 6 scans, 60 angle, D22500 command] set
[sigmove 17:19:30 INFO] Z310.SIG(18)
[sigmove 17:19:30 DEBUG] transformed Z310Ma.SPC -> Z310MA.SPC
[sigmove 17:19:30 DEBUG] transformed Z310Mb.SPC -> Z310MB.SPC
[sigmove 17:19:30 DEBUG] transformed Z310Mc.SPC -> Z310MC.SPC
[sigmove 17:19:30 DEBUG] transformed Z310Md.SPC -> Z310MD.SPC
[sigmove 17:19:30 DEBUG] transformed Z310Me.SPC -> Z310ME.SPC
[sigmove 17:19:30 DEBUG] transformed Z310Mf.SPC -> Z310MF.SPC
[Status 17:19:30 INFO] data for Z310 transferred to science data processing
[Tidy 17:19:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:19:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:19:30 INFO] resetting WatchDogTimer
[Status 17:19:30 INFO] Starting Set [AERI set: name H311, 6 scans, 60 angle, D22500 command]
[Ingest 17:19:30 INFO] Sending XML status message
[Status 17:19:30 INFO] Mirror angle: 60
[Mirror 17:19:31 INFO] rotating to position H
[Status 17:19:32 INFO] .SET file for ACQ96 ready
[Ingest 17:19:32 INFO] Starting acquisition
[Status 17:19:32 INFO] reading housekeeping
[Status 17:19:50 INFO] acquire complete
[Status 17:19:51 INFO] writing housekeeping
[Sequencer 17:19:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:19:51 INFO] incremented H scene to 311 completed views
[Sequencer 17:19:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:19:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:19:51 INFO] incremented to [AERI set: name A311, 6 scans, 120 angle, D28300 command] set
[sigmove 17:19:51 INFO] H311.SIG(18)
[sigmove 17:19:51 DEBUG] transformed H311Ma.SPC -> H311MA.SPC
[sigmove 17:19:51 DEBUG] transformed H311Mb.SPC -> H311MB.SPC
[sigmove 17:19:51 DEBUG] transformed H311Mc.SPC -> H311MC.SPC
[sigmove 17:19:51 DEBUG] transformed H311Md.SPC -> H311MD.SPC
[sigmove 17:19:51 DEBUG] transformed H311Me.SPC -> H311ME.SPC
[sigmove 17:19:51 DEBUG] transformed H311Mf.SPC -> H311MF.SPC
[Status 17:19:51 INFO] data for H311 transferred to science data processing
[Tidy 17:19:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:19:51 INFO] A309.FIN(19),H309.FIN(19),S309.FIN(19),T309.FIN(19),U309.FIN(19),V309.FIN(19),W309.FIN(19),X309.FIN(19),Y309.FIN(19),Z309.FIN(19),A310.FIN(19),H310.FIN(19),S310.FIN(19),T310.FIN(19),U310.FIN(19),V310.FIN(19),W310.FIN(19),X310.FIN(19),Y310.FIN(19),Z310.FIN(19)
[sigmove 17:19:51 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:19:51 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:19:57 DEBUG] done zipping
[WatchDog 17:19:57 INFO] resetting WatchDogTimer
[Status 17:19:57 INFO] Starting Set [AERI set: name A311, 6 scans, 120 angle, D28300 command]
[Ingest 17:19:57 INFO] Sending XML status message
[Status 17:19:57 INFO] Mirror angle: 120
[Mirror 17:19:58 INFO] rotating to position A
[Status 17:19:59 INFO] .SET file for ACQ96 ready
[Ingest 17:19:59 INFO] Starting acquisition
[Status 17:20:00 INFO] reading housekeeping
[Status 17:20:17 INFO] acquire complete
[Status 17:20:18 INFO] writing housekeeping
[Sequencer 17:20:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:20:18 INFO] incremented A scene to 311 completed views
[Sequencer 17:20:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:20:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:20:18 INFO] incremented to [AERI set: name S311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:20:18 INFO] A311.SIG(18)
[sigmove 17:20:18 DEBUG] transformed A311Ma.SPC -> A311MA.SPC
[sigmove 17:20:18 DEBUG] transformed A311Mb.SPC -> A311MB.SPC
[sigmove 17:20:18 DEBUG] transformed A311Mc.SPC -> A311MC.SPC
[sigmove 17:20:18 DEBUG] transformed A311Md.SPC -> A311MD.SPC
[sigmove 17:20:18 DEBUG] transformed A311Me.SPC -> A311ME.SPC
[sigmove 17:20:18 DEBUG] transformed A311Mf.SPC -> A311MF.SPC
[Status 17:20:18 INFO] data for A311 transferred to science data processing
[Tidy 17:20:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:20:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:20:18 INFO] resetting WatchDogTimer
[Status 17:20:18 INFO] Starting Set [AERI set: name S311, 6 scans, 0 angle, D16300 command]
[Ingest 17:20:18 INFO] Sending XML status message
[Status 17:20:18 INFO] Mirror angle: 0
[Mirror 17:20:19 INFO] rotating to position S
[Status 17:20:20 INFO] .SET file for ACQ96 ready
[Ingest 17:20:21 INFO] Starting acquisition
[Status 17:20:21 INFO] reading housekeeping
[Status 17:20:38 INFO] acquire complete
[Status 17:20:39 INFO] writing housekeeping
[Sequencer 17:20:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:20:39 INFO] incremented S scene to 311 completed views
[Sequencer 17:20:39 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:20:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:20:39 INFO] incremented to [AERI set: name T311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:20:39 INFO] S311.SIG(18)
[sigmove 17:20:39 DEBUG] transformed S311Ma.SPC -> S311MA.SPC
[sigmove 17:20:39 DEBUG] transformed S311Mb.SPC -> S311MB.SPC
[sigmove 17:20:39 DEBUG] transformed S311Mc.SPC -> S311MC.SPC
[sigmove 17:20:39 DEBUG] transformed S311Md.SPC -> S311MD.SPC
[sigmove 17:20:39 DEBUG] transformed S311Me.SPC -> S311ME.SPC
[sigmove 17:20:39 DEBUG] transformed S311Mf.SPC -> S311MF.SPC
[Status 17:20:39 INFO] data for S311 transferred to science data processing
[Tidy 17:20:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:20:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:20:39 INFO] resetting WatchDogTimer
[Status 17:20:40 INFO] Starting Set [AERI set: name T311, 6 scans, 0 angle, D16300 command]
[Ingest 17:20:40 INFO] Sending XML status message
[Status 17:20:40 INFO] Mirror angle: 0
[Mirror 17:20:40 INFO] rotating to position T
[Status 17:20:41 INFO] .SET file for ACQ96 ready
[Ingest 17:20:41 INFO] Starting acquisition
[Status 17:20:41 INFO] reading housekeeping
[Status 17:21:00 INFO] acquire complete
[Status 17:21:01 INFO] writing housekeeping
[Sequencer 17:21:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:21:01 INFO] incremented T scene to 311 completed views
[Sequencer 17:21:01 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:21:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:21:01 INFO] incremented to [AERI set: name U311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:21:01 INFO] T311.SIG(18)
[sigmove 17:21:01 DEBUG] transformed T311Ma.SPC -> T311MA.SPC
[sigmove 17:21:01 DEBUG] transformed T311Mb.SPC -> T311MB.SPC
[sigmove 17:21:01 DEBUG] transformed T311Mc.SPC -> T311MC.SPC
[sigmove 17:21:01 DEBUG] transformed T311Md.SPC -> T311MD.SPC
[sigmove 17:21:01 DEBUG] transformed T311Me.SPC -> T311ME.SPC
[sigmove 17:21:01 DEBUG] transformed T311Mf.SPC -> T311MF.SPC
[Status 17:21:01 INFO] data for T311 transferred to science data processing
[Tidy 17:21:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:21:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:21:01 INFO] resetting WatchDogTimer
[Status 17:21:01 INFO] Starting Set [AERI set: name U311, 6 scans, 0 angle, D16300 command]
[Ingest 17:21:01 INFO] Sending XML status message
[Status 17:21:01 INFO] Mirror angle: 0
[Mirror 17:21:01 INFO] rotating to position U
[Status 17:21:02 INFO] .SET file for ACQ96 ready
[Ingest 17:21:02 INFO] Starting acquisition
[Status 17:21:03 INFO] reading housekeeping
[Status 17:21:20 INFO] acquire complete
[Status 17:21:21 INFO] writing housekeeping
[Sequencer 17:21:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:21:21 INFO] incremented U scene to 311 completed views
[Sequencer 17:21:21 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:21:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:21:21 INFO] incremented to [AERI set: name V311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:21:21 INFO] U311.SIG(18)
[sigmove 17:21:21 DEBUG] transformed U311Ma.SPC -> U311MA.SPC
[sigmove 17:21:21 DEBUG] transformed U311Mb.SPC -> U311MB.SPC
[sigmove 17:21:21 DEBUG] transformed U311Mc.SPC -> U311MC.SPC
[sigmove 17:21:21 DEBUG] transformed U311Md.SPC -> U311MD.SPC
[sigmove 17:21:21 DEBUG] transformed U311Me.SPC -> U311ME.SPC
[sigmove 17:21:21 DEBUG] transformed U311Mf.SPC -> U311MF.SPC
[Status 17:21:21 INFO] data for U311 transferred to science data processing
[Tidy 17:21:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:21:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:21:21 INFO] resetting WatchDogTimer
[Status 17:21:21 INFO] Starting Set [AERI set: name V311, 6 scans, 0 angle, D16300 command]
[Ingest 17:21:21 INFO] Sending XML status message
[Status 17:21:21 INFO] Mirror angle: 0
[Mirror 17:21:22 INFO] rotating to position V
[Status 17:21:22 INFO] .SET file for ACQ96 ready
[Ingest 17:21:22 INFO] Starting acquisition
[Status 17:21:23 INFO] reading housekeeping
[Status 17:21:40 INFO] acquire complete
[Status 17:21:41 INFO] writing housekeeping
[Sequencer 17:21:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:21:41 INFO] incremented V scene to 311 completed views
[Sequencer 17:21:41 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:21:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:21:41 INFO] incremented to [AERI set: name W311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:21:41 INFO] V311.SIG(18)
[sigmove 17:21:41 DEBUG] transformed V311Ma.SPC -> V311MA.SPC
[sigmove 17:21:41 DEBUG] transformed V311Mb.SPC -> V311MB.SPC
[sigmove 17:21:41 DEBUG] transformed V311Mc.SPC -> V311MC.SPC
[sigmove 17:21:41 DEBUG] transformed V311Md.SPC -> V311MD.SPC
[sigmove 17:21:41 DEBUG] transformed V311Me.SPC -> V311ME.SPC
[sigmove 17:21:41 DEBUG] transformed V311Mf.SPC -> V311MF.SPC
[Status 17:21:41 INFO] data for V311 transferred to science data processing
[Tidy 17:21:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:21:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:21:41 INFO] resetting WatchDogTimer
[Status 17:21:41 INFO] Starting Set [AERI set: name W311, 6 scans, 0 angle, D16300 command]
[Ingest 17:21:41 INFO] Sending XML status message
[Status 17:21:41 INFO] Mirror angle: 0
[Mirror 17:21:42 INFO] rotating to position W
[Status 17:21:42 INFO] .SET file for ACQ96 ready
[Ingest 17:21:43 INFO] Starting acquisition
[Status 17:21:43 INFO] reading housekeeping
[Status 17:22:00 INFO] acquire complete
[Status 17:22:01 INFO] writing housekeeping
[Sequencer 17:22:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:22:01 INFO] incremented W scene to 311 completed views
[Sequencer 17:22:01 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:22:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:22:01 INFO] incremented to [AERI set: name X311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:22:01 INFO] W311.SIG(18)
[sigmove 17:22:01 DEBUG] transformed W311Ma.SPC -> W311MA.SPC
[sigmove 17:22:01 DEBUG] transformed W311Mb.SPC -> W311MB.SPC
[sigmove 17:22:01 DEBUG] transformed W311Mc.SPC -> W311MC.SPC
[sigmove 17:22:01 DEBUG] transformed W311Md.SPC -> W311MD.SPC
[sigmove 17:22:01 DEBUG] transformed W311Me.SPC -> W311ME.SPC
[sigmove 17:22:01 DEBUG] transformed W311Mf.SPC -> W311MF.SPC
[Status 17:22:01 INFO] data for W311 transferred to science data processing
[Tidy 17:22:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:22:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:22:01 INFO] resetting WatchDogTimer
[Status 17:22:02 INFO] Starting Set [AERI set: name X311, 6 scans, 0 angle, D16300 command]
[Ingest 17:22:02 INFO] Sending XML status message
[Status 17:22:02 INFO] Mirror angle: 0
[Mirror 17:22:02 INFO] rotating to position X
[Status 17:22:03 INFO] .SET file for ACQ96 ready
[Ingest 17:22:03 INFO] Starting acquisition
[Status 17:22:03 INFO] reading housekeeping
[Status 17:22:22 INFO] acquire complete
[Status 17:22:23 INFO] writing housekeeping
[Sequencer 17:22:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:22:23 INFO] incremented X scene to 311 completed views
[Sequencer 17:22:23 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:22:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:22:23 INFO] incremented to [AERI set: name Y311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:22:23 INFO] X311.SIG(18)
[sigmove 17:22:23 DEBUG] transformed X311Ma.SPC -> X311MA.SPC
[sigmove 17:22:23 DEBUG] transformed X311Mb.SPC -> X311MB.SPC
[sigmove 17:22:23 DEBUG] transformed X311Mc.SPC -> X311MC.SPC
[sigmove 17:22:23 DEBUG] transformed X311Md.SPC -> X311MD.SPC
[sigmove 17:22:23 DEBUG] transformed X311Me.SPC -> X311ME.SPC
[sigmove 17:22:23 DEBUG] transformed X311Mf.SPC -> X311MF.SPC
[Status 17:22:23 INFO] data for X311 transferred to science data processing
[Tidy 17:22:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:22:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:22:23 INFO] resetting WatchDogTimer
[Status 17:22:23 INFO] Starting Set [AERI set: name Y311, 6 scans, 0 angle, D16300 command]
[Ingest 17:22:23 INFO] Sending XML status message
[Status 17:22:23 INFO] Mirror angle: 0
[Mirror 17:22:23 INFO] rotating to position Y
[Status 17:22:24 INFO] .SET file for ACQ96 ready
[Ingest 17:22:24 INFO] Starting acquisition
[Status 17:22:25 INFO] reading housekeeping
[Status 17:22:42 INFO] acquire complete
[Status 17:22:43 INFO] writing housekeeping
[Sequencer 17:22:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:22:43 INFO] incremented Y scene to 311 completed views
[Sequencer 17:22:43 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:22:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:22:43 INFO] incremented to [AERI set: name Z311, 6 scans, 0 angle, D16300 command] set
[sigmove 17:22:43 INFO] Y311.SIG(18)
[sigmove 17:22:43 DEBUG] transformed Y311Ma.SPC -> Y311MA.SPC
[sigmove 17:22:43 DEBUG] transformed Y311Mb.SPC -> Y311MB.SPC
[sigmove 17:22:43 DEBUG] transformed Y311Mc.SPC -> Y311MC.SPC
[sigmove 17:22:43 DEBUG] transformed Y311Md.SPC -> Y311MD.SPC
[sigmove 17:22:43 DEBUG] transformed Y311Me.SPC -> Y311ME.SPC
[sigmove 17:22:43 DEBUG] transformed Y311Mf.SPC -> Y311MF.SPC
[Status 17:22:43 INFO] data for Y311 transferred to science data processing
[Tidy 17:22:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:22:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:22:43 INFO] resetting WatchDogTimer
[Status 17:22:43 INFO] Starting Set [AERI set: name Z311, 6 scans, 0 angle, D16300 command]
[Ingest 17:22:43 INFO] Sending XML status message
[Status 17:22:43 INFO] Mirror angle: 0
[Mirror 17:22:44 INFO] rotating to position Z
[Status 17:22:44 INFO] .SET file for ACQ96 ready
[Ingest 17:22:44 INFO] Starting acquisition
[Status 17:22:45 INFO] reading housekeeping
[Status 17:23:02 INFO] acquire complete
[Status 17:23:03 INFO] writing housekeeping
[Sequencer 17:23:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:23:03 INFO] incremented Z scene to 311 completed views
[Sequencer 17:23:03 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:23:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:23:03 INFO] incremented to [AERI set: name A312, 6 scans, 120 angle, D28300 command] set
[sigmove 17:23:03 INFO] Z311.SIG(18)
[sigmove 17:23:03 DEBUG] transformed Z311Ma.SPC -> Z311MA.SPC
[sigmove 17:23:03 DEBUG] transformed Z311Mb.SPC -> Z311MB.SPC
[sigmove 17:23:03 DEBUG] transformed Z311Mc.SPC -> Z311MC.SPC
[sigmove 17:23:03 DEBUG] transformed Z311Md.SPC -> Z311MD.SPC
[sigmove 17:23:03 DEBUG] transformed Z311Me.SPC -> Z311ME.SPC
[sigmove 17:23:03 DEBUG] transformed Z311Mf.SPC -> Z311MF.SPC
[Status 17:23:03 INFO] data for Z311 transferred to science data processing
[Tidy 17:23:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:23:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:23:03 INFO] resetting WatchDogTimer
[Status 17:23:03 INFO] Starting Set [AERI set: name A312, 6 scans, 120 angle, D28300 command]
[Ingest 17:23:03 INFO] Sending XML status message
[Status 17:23:03 INFO] Mirror angle: 120
[Mirror 17:23:04 INFO] rotating to position A
[Status 17:23:05 INFO] .SET file for ACQ96 ready
[Ingest 17:23:06 INFO] Starting acquisition
[Status 17:23:06 INFO] reading housekeeping
[Status 17:23:23 INFO] acquire complete
[Status 17:23:24 INFO] writing housekeeping
[Sequencer 17:23:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:23:24 INFO] incremented A scene to 312 completed views
[Sequencer 17:23:24 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:23:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:23:24 INFO] incremented to [AERI set: name H312, 6 scans, 60 angle, D22500 command] set
[sigmove 17:23:24 INFO] A312.SIG(18)
[sigmove 17:23:24 DEBUG] transformed A312Ma.SPC -> A312MA.SPC
[sigmove 17:23:24 DEBUG] transformed A312Mb.SPC -> A312MB.SPC
[sigmove 17:23:24 DEBUG] transformed A312Mc.SPC -> A312MC.SPC
[sigmove 17:23:24 DEBUG] transformed A312Md.SPC -> A312MD.SPC
[sigmove 17:23:24 DEBUG] transformed A312Me.SPC -> A312ME.SPC
[sigmove 17:23:24 DEBUG] transformed A312Mf.SPC -> A312MF.SPC
[Status 17:23:24 INFO] data for A312 transferred to science data processing
[Tidy 17:23:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:23:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:23:24 INFO] resetting WatchDogTimer
[Status 17:23:25 INFO] Starting Set [AERI set: name H312, 6 scans, 60 angle, D22500 command]
[Ingest 17:23:25 INFO] Sending XML status message
[Status 17:23:25 INFO] Mirror angle: 60
[Mirror 17:23:25 INFO] rotating to position H
[Status 17:23:26 INFO] .SET file for ACQ96 ready
[Ingest 17:23:26 INFO] Starting acquisition
[Status 17:23:27 INFO] reading housekeeping
[Status 17:23:44 INFO] acquire complete
[Status 17:23:46 INFO] writing housekeeping
[Sequencer 17:23:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:23:46 INFO] incremented H scene to 312 completed views
[Sequencer 17:23:46 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:23:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:23:46 INFO] incremented to [AERI set: name S312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:23:46 INFO] H312.SIG(18)
[sigmove 17:23:46 DEBUG] transformed H312Ma.SPC -> H312MA.SPC
[sigmove 17:23:46 DEBUG] transformed H312Mb.SPC -> H312MB.SPC
[sigmove 17:23:46 DEBUG] transformed H312Mc.SPC -> H312MC.SPC
[sigmove 17:23:46 DEBUG] transformed H312Md.SPC -> H312MD.SPC
[sigmove 17:23:46 DEBUG] transformed H312Me.SPC -> H312ME.SPC
[sigmove 17:23:46 DEBUG] transformed H312Mf.SPC -> H312MF.SPC
[Status 17:23:46 INFO] data for H312 transferred to science data processing
[Tidy 17:23:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:23:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:23:46 INFO] resetting WatchDogTimer
[Status 17:23:46 INFO] Starting Set [AERI set: name S312, 6 scans, 0 angle, D16300 command]
[Ingest 17:23:46 INFO] Sending XML status message
[Status 17:23:46 INFO] Mirror angle: 0
[Mirror 17:23:46 INFO] rotating to position S
[Status 17:23:47 INFO] .SET file for ACQ96 ready
[Ingest 17:23:48 INFO] Starting acquisition
[Status 17:23:48 INFO] reading housekeeping
[Status 17:24:06 INFO] acquire complete
[Status 17:24:07 INFO] writing housekeeping
[Sequencer 17:24:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:24:07 INFO] incremented S scene to 312 completed views
[Sequencer 17:24:07 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:24:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:24:07 INFO] incremented to [AERI set: name T312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:24:07 INFO] S312.SIG(18)
[sigmove 17:24:07 DEBUG] transformed S312Ma.SPC -> S312MA.SPC
[sigmove 17:24:07 DEBUG] transformed S312Mb.SPC -> S312MB.SPC
[sigmove 17:24:07 DEBUG] transformed S312Mc.SPC -> S312MC.SPC
[sigmove 17:24:07 DEBUG] transformed S312Md.SPC -> S312MD.SPC
[sigmove 17:24:07 DEBUG] transformed S312Me.SPC -> S312ME.SPC
[sigmove 17:24:07 DEBUG] transformed S312Mf.SPC -> S312MF.SPC
[Status 17:24:07 INFO] data for S312 transferred to science data processing
[Tidy 17:24:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:24:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:24:07 INFO] resetting WatchDogTimer
[Status 17:24:07 INFO] Starting Set [AERI set: name T312, 6 scans, 0 angle, D16300 command]
[Ingest 17:24:07 INFO] Sending XML status message
[Status 17:24:07 INFO] Mirror angle: 0
[Mirror 17:24:08 INFO] rotating to position T
[Status 17:24:08 INFO] .SET file for ACQ96 ready
[Ingest 17:24:09 INFO] Starting acquisition
[Status 17:24:09 INFO] reading housekeeping
[Status 17:24:27 INFO] acquire complete
[Status 17:24:28 INFO] writing housekeeping
[Sequencer 17:24:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:24:28 INFO] incremented T scene to 312 completed views
[Sequencer 17:24:28 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:24:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:24:28 INFO] incremented to [AERI set: name U312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:24:28 INFO] T312.SIG(18)
[sigmove 17:24:28 DEBUG] transformed T312Ma.SPC -> T312MA.SPC
[sigmove 17:24:28 DEBUG] transformed T312Mb.SPC -> T312MB.SPC
[sigmove 17:24:28 DEBUG] transformed T312Mc.SPC -> T312MC.SPC
[sigmove 17:24:28 DEBUG] transformed T312Md.SPC -> T312MD.SPC
[sigmove 17:24:28 DEBUG] transformed T312Me.SPC -> T312ME.SPC
[sigmove 17:24:28 DEBUG] transformed T312Mf.SPC -> T312MF.SPC
[Status 17:24:28 INFO] data for T312 transferred to science data processing
[Tidy 17:24:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:24:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:24:28 INFO] resetting WatchDogTimer
[Status 17:24:29 INFO] Starting Set [AERI set: name U312, 6 scans, 0 angle, D16300 command]
[Ingest 17:24:29 INFO] Sending XML status message
[Status 17:24:29 INFO] Mirror angle: 0
[Mirror 17:24:29 INFO] rotating to position U
[Status 17:24:29 INFO] .SET file for ACQ96 ready
[Ingest 17:24:30 INFO] Starting acquisition
[Status 17:24:30 INFO] reading housekeeping
[Status 17:24:47 INFO] acquire complete
[Status 17:24:49 INFO] writing housekeeping
[Sequencer 17:24:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:24:49 INFO] incremented U scene to 312 completed views
[Sequencer 17:24:49 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:24:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:24:49 INFO] incremented to [AERI set: name V312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:24:49 INFO] U312.SIG(18)
[sigmove 17:24:49 DEBUG] transformed U312Ma.SPC -> U312MA.SPC
[sigmove 17:24:49 DEBUG] transformed U312Mb.SPC -> U312MB.SPC
[sigmove 17:24:49 DEBUG] transformed U312Mc.SPC -> U312MC.SPC
[sigmove 17:24:49 DEBUG] transformed U312Md.SPC -> U312MD.SPC
[sigmove 17:24:49 DEBUG] transformed U312Me.SPC -> U312ME.SPC
[sigmove 17:24:49 DEBUG] transformed U312Mf.SPC -> U312MF.SPC
[Status 17:24:49 INFO] data for U312 transferred to science data processing
[Tidy 17:24:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:24:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:24:49 INFO] resetting WatchDogTimer
[Status 17:24:49 INFO] Starting Set [AERI set: name V312, 6 scans, 0 angle, D16300 command]
[Ingest 17:24:49 INFO] Sending XML status message
[Status 17:24:49 INFO] Mirror angle: 0
[Mirror 17:24:49 INFO] rotating to position V
[Status 17:24:50 INFO] .SET file for ACQ96 ready
[Ingest 17:24:50 INFO] Starting acquisition
[Status 17:24:51 INFO] reading housekeeping
[Status 17:25:09 INFO] acquire complete
[Status 17:25:10 INFO] writing housekeeping
[Sequencer 17:25:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:25:10 INFO] incremented V scene to 312 completed views
[Sequencer 17:25:10 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:25:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:25:10 INFO] incremented to [AERI set: name W312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:25:10 INFO] V312.SIG(18)
[sigmove 17:25:10 DEBUG] transformed V312Ma.SPC -> V312MA.SPC
[sigmove 17:25:10 DEBUG] transformed V312Mb.SPC -> V312MB.SPC
[sigmove 17:25:10 DEBUG] transformed V312Mc.SPC -> V312MC.SPC
[sigmove 17:25:10 DEBUG] transformed V312Md.SPC -> V312MD.SPC
[sigmove 17:25:10 DEBUG] transformed V312Me.SPC -> V312ME.SPC
[sigmove 17:25:10 DEBUG] transformed V312Mf.SPC -> V312MF.SPC
[Status 17:25:10 INFO] data for V312 transferred to science data processing
[Tidy 17:25:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:25:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:25:10 INFO] resetting WatchDogTimer
[Status 17:25:10 INFO] Starting Set [AERI set: name W312, 6 scans, 0 angle, D16300 command]
[Ingest 17:25:10 INFO] Sending XML status message
[Status 17:25:10 INFO] Mirror angle: 0
[Mirror 17:25:11 INFO] rotating to position W
[Status 17:25:11 INFO] .SET file for ACQ96 ready
[Ingest 17:25:11 INFO] Starting acquisition
[Status 17:25:12 INFO] reading housekeeping
[Status 17:25:30 INFO] acquire complete
[Status 17:25:31 INFO] writing housekeeping
[Sequencer 17:25:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:25:31 INFO] incremented W scene to 312 completed views
[Sequencer 17:25:31 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:25:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:25:31 INFO] incremented to [AERI set: name X312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:25:31 INFO] W312.SIG(18)
[sigmove 17:25:31 DEBUG] transformed W312Ma.SPC -> W312MA.SPC
[sigmove 17:25:31 DEBUG] transformed W312Mb.SPC -> W312MB.SPC
[sigmove 17:25:31 DEBUG] transformed W312Mc.SPC -> W312MC.SPC
[sigmove 17:25:31 DEBUG] transformed W312Md.SPC -> W312MD.SPC
[sigmove 17:25:31 DEBUG] transformed W312Me.SPC -> W312ME.SPC
[sigmove 17:25:31 DEBUG] transformed W312Mf.SPC -> W312MF.SPC
[Status 17:25:31 INFO] data for W312 transferred to science data processing
[Tidy 17:25:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:25:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:25:31 INFO] resetting WatchDogTimer
[Status 17:25:31 INFO] Starting Set [AERI set: name X312, 6 scans, 0 angle, D16300 command]
[Ingest 17:25:31 INFO] Sending XML status message
[Status 17:25:31 INFO] Mirror angle: 0
[Mirror 17:25:32 INFO] rotating to position X
[Status 17:25:32 INFO] .SET file for ACQ96 ready
[Ingest 17:25:33 INFO] Starting acquisition
[Status 17:25:33 INFO] reading housekeeping
[Status 17:25:50 INFO] acquire complete
[Status 17:25:51 INFO] writing housekeeping
[Sequencer 17:25:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:25:51 INFO] incremented X scene to 312 completed views
[Sequencer 17:25:51 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:25:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:25:51 INFO] incremented to [AERI set: name Y312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:25:51 INFO] X312.SIG(18)
[sigmove 17:25:51 DEBUG] transformed X312Ma.SPC -> X312MA.SPC
[sigmove 17:25:51 DEBUG] transformed X312Mb.SPC -> X312MB.SPC
[sigmove 17:25:51 DEBUG] transformed X312Mc.SPC -> X312MC.SPC
[sigmove 17:25:51 DEBUG] transformed X312Md.SPC -> X312MD.SPC
[sigmove 17:25:51 DEBUG] transformed X312Me.SPC -> X312ME.SPC
[sigmove 17:25:51 DEBUG] transformed X312Mf.SPC -> X312MF.SPC
[Status 17:25:51 INFO] data for X312 transferred to science data processing
[Tidy 17:25:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:25:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:25:51 INFO] resetting WatchDogTimer
[Status 17:25:52 INFO] Starting Set [AERI set: name Y312, 6 scans, 0 angle, D16300 command]
[Ingest 17:25:52 INFO] Sending XML status message
[Status 17:25:52 INFO] Mirror angle: 0
[Mirror 17:25:52 INFO] rotating to position Y
[Status 17:25:52 INFO] .SET file for ACQ96 ready
[Ingest 17:25:53 INFO] Starting acquisition
[Status 17:25:53 INFO] reading housekeeping
[Status 17:26:10 INFO] acquire complete
[Status 17:26:11 INFO] writing housekeeping
[Sequencer 17:26:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:26:11 INFO] incremented Y scene to 312 completed views
[Sequencer 17:26:11 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:26:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:26:11 INFO] incremented to [AERI set: name Z312, 6 scans, 0 angle, D16300 command] set
[sigmove 17:26:11 INFO] Y312.SIG(18)
[sigmove 17:26:11 DEBUG] transformed Y312Ma.SPC -> Y312MA.SPC
[sigmove 17:26:11 DEBUG] transformed Y312Mb.SPC -> Y312MB.SPC
[sigmove 17:26:11 DEBUG] transformed Y312Mc.SPC -> Y312MC.SPC
[sigmove 17:26:11 DEBUG] transformed Y312Md.SPC -> Y312MD.SPC
[sigmove 17:26:11 DEBUG] transformed Y312Me.SPC -> Y312ME.SPC
[sigmove 17:26:11 DEBUG] transformed Y312Mf.SPC -> Y312MF.SPC
[Status 17:26:11 INFO] data for Y312 transferred to science data processing
[Tidy 17:26:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:26:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:26:11 INFO] resetting WatchDogTimer
[Status 17:26:12 INFO] Starting Set [AERI set: name Z312, 6 scans, 0 angle, D16300 command]
[Ingest 17:26:12 INFO] Sending XML status message
[Status 17:26:12 INFO] Mirror angle: 0
[Mirror 17:26:12 INFO] rotating to position Z
[Status 17:26:13 INFO] .SET file for ACQ96 ready
[Ingest 17:26:13 INFO] Starting acquisition
[Status 17:26:13 INFO] reading housekeeping
[Status 17:26:32 INFO] acquire complete
[Status 17:26:33 INFO] writing housekeeping
[Sequencer 17:26:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:26:33 INFO] incremented Z scene to 312 completed views
[Sequencer 17:26:33 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:26:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:26:33 INFO] incremented to [AERI set: name H313, 6 scans, 60 angle, D22500 command] set
[sigmove 17:26:33 INFO] Z312.SIG(18)
[sigmove 17:26:33 DEBUG] transformed Z312Ma.SPC -> Z312MA.SPC
[sigmove 17:26:33 DEBUG] transformed Z312Mb.SPC -> Z312MB.SPC
[sigmove 17:26:33 DEBUG] transformed Z312Mc.SPC -> Z312MC.SPC
[sigmove 17:26:33 DEBUG] transformed Z312Md.SPC -> Z312MD.SPC
[sigmove 17:26:33 DEBUG] transformed Z312Me.SPC -> Z312ME.SPC
[sigmove 17:26:33 DEBUG] transformed Z312Mf.SPC -> Z312MF.SPC
[Status 17:26:33 INFO] data for Z312 transferred to science data processing
[Tidy 17:26:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:26:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:26:33 INFO] resetting WatchDogTimer
[Status 17:26:33 INFO] Starting Set [AERI set: name H313, 6 scans, 60 angle, D22500 command]
[Ingest 17:26:33 INFO] Sending XML status message
[Status 17:26:33 INFO] Mirror angle: 60
[Mirror 17:26:33 INFO] rotating to position H
[Status 17:26:34 INFO] .SET file for ACQ96 ready
[Ingest 17:26:35 INFO] Starting acquisition
[Status 17:26:35 INFO] reading housekeeping
[Status 17:26:53 INFO] acquire complete
[Status 17:26:54 INFO] writing housekeeping
[Sequencer 17:26:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:26:54 INFO] incremented H scene to 313 completed views
[Sequencer 17:26:54 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:26:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:26:54 INFO] incremented to [AERI set: name A313, 6 scans, 120 angle, D28300 command] set
[sigmove 17:26:54 INFO] H313.SIG(18)
[sigmove 17:26:54 DEBUG] transformed H313Ma.SPC -> H313MA.SPC
[sigmove 17:26:54 DEBUG] transformed H313Mb.SPC -> H313MB.SPC
[sigmove 17:26:54 DEBUG] transformed H313Mc.SPC -> H313MC.SPC
[sigmove 17:26:54 DEBUG] transformed H313Md.SPC -> H313MD.SPC
[sigmove 17:26:54 DEBUG] transformed H313Me.SPC -> H313ME.SPC
[sigmove 17:26:54 DEBUG] transformed H313Mf.SPC -> H313MF.SPC
[Status 17:26:54 INFO] data for H313 transferred to science data processing
[Tidy 17:26:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:26:54 INFO] A311.FIN(19),H311.FIN(19),S311.FIN(19),T311.FIN(19),U311.FIN(19),V311.FIN(19),W311.FIN(19),X311.FIN(19),Y311.FIN(19),Z311.FIN(19),A312.FIN(19),H312.FIN(19),S312.FIN(19),T312.FIN(19),U312.FIN(19),V312.FIN(19),W312.FIN(19),X312.FIN(19),Y312.FIN(19),Z312.FIN(19)
[sigmove 17:26:54 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:26:54 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:26:59 DEBUG] done zipping
[WatchDog 17:27:00 INFO] resetting WatchDogTimer
[Status 17:27:00 INFO] Starting Set [AERI set: name A313, 6 scans, 120 angle, D28300 command]
[Ingest 17:27:00 INFO] Sending XML status message
[Status 17:27:00 INFO] Mirror angle: 120
[Mirror 17:27:01 INFO] rotating to position A
[Status 17:27:02 INFO] .SET file for ACQ96 ready
[Ingest 17:27:02 INFO] Starting acquisition
[Status 17:27:02 INFO] reading housekeeping
[Status 17:27:20 INFO] acquire complete
[Status 17:27:21 INFO] writing housekeeping
[Sequencer 17:27:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:27:21 INFO] incremented A scene to 313 completed views
[Sequencer 17:27:21 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:27:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:27:21 INFO] incremented to [AERI set: name S313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:27:21 INFO] A313.SIG(18)
[sigmove 17:27:21 DEBUG] transformed A313Ma.SPC -> A313MA.SPC
[sigmove 17:27:21 DEBUG] transformed A313Mb.SPC -> A313MB.SPC
[sigmove 17:27:21 DEBUG] transformed A313Mc.SPC -> A313MC.SPC
[sigmove 17:27:21 DEBUG] transformed A313Md.SPC -> A313MD.SPC
[sigmove 17:27:21 DEBUG] transformed A313Me.SPC -> A313ME.SPC
[sigmove 17:27:21 DEBUG] transformed A313Mf.SPC -> A313MF.SPC
[Status 17:27:21 INFO] data for A313 transferred to science data processing
[Tidy 17:27:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:27:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:27:21 INFO] resetting WatchDogTimer
[Status 17:27:21 INFO] Starting Set [AERI set: name S313, 6 scans, 0 angle, D16300 command]
[Ingest 17:27:21 INFO] Sending XML status message
[Status 17:27:21 INFO] Mirror angle: 0
[Mirror 17:27:22 INFO] rotating to position S
[Status 17:27:23 INFO] .SET file for ACQ96 ready
[Ingest 17:27:23 INFO] Starting acquisition
[Status 17:27:24 INFO] reading housekeeping
[Status 17:27:41 INFO] acquire complete
[Status 17:27:42 INFO] writing housekeeping
[Sequencer 17:27:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:27:42 INFO] incremented S scene to 313 completed views
[Sequencer 17:27:42 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:27:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:27:42 INFO] incremented to [AERI set: name T313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:27:42 INFO] S313.SIG(18)
[sigmove 17:27:42 DEBUG] transformed S313Ma.SPC -> S313MA.SPC
[sigmove 17:27:42 DEBUG] transformed S313Mb.SPC -> S313MB.SPC
[sigmove 17:27:42 DEBUG] transformed S313Mc.SPC -> S313MC.SPC
[sigmove 17:27:42 DEBUG] transformed S313Md.SPC -> S313MD.SPC
[sigmove 17:27:42 DEBUG] transformed S313Me.SPC -> S313ME.SPC
[sigmove 17:27:42 DEBUG] transformed S313Mf.SPC -> S313MF.SPC
[Status 17:27:42 INFO] data for S313 transferred to science data processing
[Tidy 17:27:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:27:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:27:42 INFO] resetting WatchDogTimer
[Status 17:27:43 INFO] Starting Set [AERI set: name T313, 6 scans, 0 angle, D16300 command]
[Ingest 17:27:43 INFO] Sending XML status message
[Status 17:27:43 INFO] Mirror angle: 0
[Mirror 17:27:43 INFO] rotating to position T
[Status 17:27:44 INFO] .SET file for ACQ96 ready
[Ingest 17:27:44 INFO] Starting acquisition
[Status 17:27:44 INFO] reading housekeeping
[Status 17:28:03 INFO] acquire complete
[Status 17:28:04 INFO] writing housekeeping
[Sequencer 17:28:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:28:04 INFO] incremented T scene to 313 completed views
[Sequencer 17:28:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:28:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:28:04 INFO] incremented to [AERI set: name U313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:28:04 INFO] T313.SIG(18)
[sigmove 17:28:04 DEBUG] transformed T313Ma.SPC -> T313MA.SPC
[sigmove 17:28:04 DEBUG] transformed T313Mb.SPC -> T313MB.SPC
[sigmove 17:28:04 DEBUG] transformed T313Mc.SPC -> T313MC.SPC
[sigmove 17:28:04 DEBUG] transformed T313Md.SPC -> T313MD.SPC
[sigmove 17:28:04 DEBUG] transformed T313Me.SPC -> T313ME.SPC
[sigmove 17:28:04 DEBUG] transformed T313Mf.SPC -> T313MF.SPC
[Status 17:28:04 INFO] data for T313 transferred to science data processing
[Tidy 17:28:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:28:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:28:04 INFO] resetting WatchDogTimer
[Status 17:28:04 INFO] Starting Set [AERI set: name U313, 6 scans, 0 angle, D16300 command]
[Ingest 17:28:04 INFO] Sending XML status message
[Status 17:28:04 INFO] Mirror angle: 0
[Mirror 17:28:05 INFO] rotating to position U
[Status 17:28:05 INFO] .SET file for ACQ96 ready
[Ingest 17:28:05 INFO] Starting acquisition
[Status 17:28:06 INFO] reading housekeeping
[Status 17:28:24 INFO] acquire complete
[Status 17:28:25 INFO] writing housekeeping
[Sequencer 17:28:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:28:25 INFO] incremented U scene to 313 completed views
[Sequencer 17:28:25 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:28:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:28:25 INFO] incremented to [AERI set: name V313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:28:25 INFO] U313.SIG(18)
[sigmove 17:28:25 DEBUG] transformed U313Ma.SPC -> U313MA.SPC
[sigmove 17:28:25 DEBUG] transformed U313Mb.SPC -> U313MB.SPC
[sigmove 17:28:25 DEBUG] transformed U313Mc.SPC -> U313MC.SPC
[sigmove 17:28:25 DEBUG] transformed U313Md.SPC -> U313MD.SPC
[sigmove 17:28:25 DEBUG] transformed U313Me.SPC -> U313ME.SPC
[sigmove 17:28:25 DEBUG] transformed U313Mf.SPC -> U313MF.SPC
[Status 17:28:25 INFO] data for U313 transferred to science data processing
[Tidy 17:28:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:28:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:28:25 INFO] resetting WatchDogTimer
[Status 17:28:25 INFO] Starting Set [AERI set: name V313, 6 scans, 0 angle, D16300 command]
[Ingest 17:28:25 INFO] Sending XML status message
[Status 17:28:25 INFO] Mirror angle: 0
[Mirror 17:28:26 INFO] rotating to position V
[Status 17:28:26 INFO] .SET file for ACQ96 ready
[Ingest 17:28:26 INFO] Starting acquisition
[Status 17:28:27 INFO] reading housekeeping
[Status 17:28:45 INFO] acquire complete
[Status 17:28:46 INFO] writing housekeeping
[Sequencer 17:28:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:28:46 INFO] incremented V scene to 313 completed views
[Sequencer 17:28:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:28:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:28:46 INFO] incremented to [AERI set: name W313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:28:46 INFO] V313.SIG(18)
[sigmove 17:28:46 DEBUG] transformed V313Ma.SPC -> V313MA.SPC
[sigmove 17:28:46 DEBUG] transformed V313Mb.SPC -> V313MB.SPC
[sigmove 17:28:46 DEBUG] transformed V313Mc.SPC -> V313MC.SPC
[sigmove 17:28:46 DEBUG] transformed V313Md.SPC -> V313MD.SPC
[sigmove 17:28:46 DEBUG] transformed V313Me.SPC -> V313ME.SPC
[sigmove 17:28:46 DEBUG] transformed V313Mf.SPC -> V313MF.SPC
[Status 17:28:46 INFO] data for V313 transferred to science data processing
[Tidy 17:28:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:28:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:28:46 INFO] resetting WatchDogTimer
[Status 17:28:46 INFO] Starting Set [AERI set: name W313, 6 scans, 0 angle, D16300 command]
[Ingest 17:28:46 INFO] Sending XML status message
[Status 17:28:46 INFO] Mirror angle: 0
[Mirror 17:28:47 INFO] rotating to position W
[Status 17:28:47 INFO] .SET file for ACQ96 ready
[Ingest 17:28:48 INFO] Starting acquisition
[Status 17:28:48 INFO] reading housekeeping
[Status 17:29:05 INFO] acquire complete
[Status 17:29:06 INFO] writing housekeeping
[Sequencer 17:29:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:29:06 INFO] incremented W scene to 313 completed views
[Sequencer 17:29:06 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:29:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:29:06 INFO] incremented to [AERI set: name X313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:29:06 INFO] W313.SIG(18)
[sigmove 17:29:06 DEBUG] transformed W313Ma.SPC -> W313MA.SPC
[sigmove 17:29:06 DEBUG] transformed W313Mb.SPC -> W313MB.SPC
[sigmove 17:29:06 DEBUG] transformed W313Mc.SPC -> W313MC.SPC
[sigmove 17:29:06 DEBUG] transformed W313Md.SPC -> W313MD.SPC
[sigmove 17:29:06 DEBUG] transformed W313Me.SPC -> W313ME.SPC
[sigmove 17:29:06 DEBUG] transformed W313Mf.SPC -> W313MF.SPC
[Status 17:29:06 INFO] data for W313 transferred to science data processing
[Tidy 17:29:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:29:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:29:06 INFO] resetting WatchDogTimer
[Status 17:29:07 INFO] Starting Set [AERI set: name X313, 6 scans, 0 angle, D16300 command]
[Ingest 17:29:07 INFO] Sending XML status message
[Status 17:29:07 INFO] Mirror angle: 0
[Mirror 17:29:07 INFO] rotating to position X
[Status 17:29:08 INFO] .SET file for ACQ96 ready
[Ingest 17:29:08 INFO] Starting acquisition
[Status 17:29:08 INFO] reading housekeeping
[Status 17:29:25 INFO] acquire complete
[Status 17:29:26 INFO] writing housekeeping
[Sequencer 17:29:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:29:26 INFO] incremented X scene to 313 completed views
[Sequencer 17:29:26 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:29:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:29:26 INFO] incremented to [AERI set: name Y313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:29:26 INFO] X313.SIG(18)
[sigmove 17:29:26 DEBUG] transformed X313Ma.SPC -> X313MA.SPC
[sigmove 17:29:26 DEBUG] transformed X313Mb.SPC -> X313MB.SPC
[sigmove 17:29:26 DEBUG] transformed X313Mc.SPC -> X313MC.SPC
[sigmove 17:29:26 DEBUG] transformed X313Md.SPC -> X313MD.SPC
[sigmove 17:29:26 DEBUG] transformed X313Me.SPC -> X313ME.SPC
[sigmove 17:29:26 DEBUG] transformed X313Mf.SPC -> X313MF.SPC
[Status 17:29:26 INFO] data for X313 transferred to science data processing
[Tidy 17:29:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:29:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:29:26 INFO] resetting WatchDogTimer
[Status 17:29:27 INFO] Starting Set [AERI set: name Y313, 6 scans, 0 angle, D16300 command]
[Ingest 17:29:27 INFO] Sending XML status message
[Status 17:29:27 INFO] Mirror angle: 0
[Mirror 17:29:27 INFO] rotating to position Y
[Status 17:29:28 INFO] .SET file for ACQ96 ready
[Ingest 17:29:28 INFO] Starting acquisition
[Status 17:29:28 INFO] reading housekeeping
[Status 17:29:46 INFO] acquire complete
[Status 17:29:47 INFO] writing housekeeping
[Sequencer 17:29:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:29:47 INFO] incremented Y scene to 313 completed views
[Sequencer 17:29:47 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:29:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:29:47 INFO] incremented to [AERI set: name Z313, 6 scans, 0 angle, D16300 command] set
[sigmove 17:29:47 INFO] Y313.SIG(18)
[sigmove 17:29:47 DEBUG] transformed Y313Ma.SPC -> Y313MA.SPC
[sigmove 17:29:47 DEBUG] transformed Y313Mb.SPC -> Y313MB.SPC
[sigmove 17:29:47 DEBUG] transformed Y313Mc.SPC -> Y313MC.SPC
[sigmove 17:29:47 DEBUG] transformed Y313Md.SPC -> Y313MD.SPC
[sigmove 17:29:47 DEBUG] transformed Y313Me.SPC -> Y313ME.SPC
[sigmove 17:29:47 DEBUG] transformed Y313Mf.SPC -> Y313MF.SPC
[Status 17:29:47 INFO] data for Y313 transferred to science data processing
[Tidy 17:29:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:29:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:29:47 INFO] resetting WatchDogTimer
[Status 17:29:47 INFO] Starting Set [AERI set: name Z313, 6 scans, 0 angle, D16300 command]
[Ingest 17:29:47 INFO] Sending XML status message
[Status 17:29:47 INFO] Mirror angle: 0
[Mirror 17:29:47 INFO] rotating to position Z
[Status 17:29:48 INFO] .SET file for ACQ96 ready
[Ingest 17:29:48 INFO] Starting acquisition
[Status 17:29:49 INFO] reading housekeeping
[Status 17:30:06 INFO] acquire complete
[Status 17:30:07 INFO] writing housekeeping
[Sequencer 17:30:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:30:07 INFO] incremented Z scene to 313 completed views
[Sequencer 17:30:07 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:30:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:30:07 INFO] incremented to [AERI set: name A314, 6 scans, 120 angle, D28300 command] set
[sigmove 17:30:07 INFO] Z313.SIG(18)
[sigmove 17:30:07 DEBUG] transformed Z313Ma.SPC -> Z313MA.SPC
[sigmove 17:30:07 DEBUG] transformed Z313Mb.SPC -> Z313MB.SPC
[sigmove 17:30:07 DEBUG] transformed Z313Mc.SPC -> Z313MC.SPC
[sigmove 17:30:07 DEBUG] transformed Z313Md.SPC -> Z313MD.SPC
[sigmove 17:30:07 DEBUG] transformed Z313Me.SPC -> Z313ME.SPC
[sigmove 17:30:07 DEBUG] transformed Z313Mf.SPC -> Z313MF.SPC
[Status 17:30:07 INFO] data for Z313 transferred to science data processing
[Tidy 17:30:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:30:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:30:07 INFO] resetting WatchDogTimer
[Status 17:30:07 INFO] Starting Set [AERI set: name A314, 6 scans, 120 angle, D28300 command]
[Ingest 17:30:07 INFO] Sending XML status message
[Status 17:30:07 INFO] Mirror angle: 120
[Mirror 17:30:08 INFO] rotating to position A
[Status 17:30:09 INFO] .SET file for ACQ96 ready
[Ingest 17:30:09 INFO] Starting acquisition
[Status 17:30:10 INFO] reading housekeeping
[Status 17:30:27 INFO] acquire complete
[Status 17:30:28 INFO] writing housekeeping
[Sequencer 17:30:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:30:28 INFO] incremented A scene to 314 completed views
[Sequencer 17:30:28 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:30:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:30:28 INFO] incremented to [AERI set: name H314, 6 scans, 60 angle, D22500 command] set
[sigmove 17:30:28 INFO] A314.SIG(18)
[sigmove 17:30:28 DEBUG] transformed A314Ma.SPC -> A314MA.SPC
[sigmove 17:30:28 DEBUG] transformed A314Mb.SPC -> A314MB.SPC
[sigmove 17:30:28 DEBUG] transformed A314Mc.SPC -> A314MC.SPC
[sigmove 17:30:28 DEBUG] transformed A314Md.SPC -> A314MD.SPC
[sigmove 17:30:28 DEBUG] transformed A314Me.SPC -> A314ME.SPC
[sigmove 17:30:28 DEBUG] transformed A314Mf.SPC -> A314MF.SPC
[Status 17:30:28 INFO] data for A314 transferred to science data processing
[Tidy 17:30:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:30:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:30:28 INFO] resetting WatchDogTimer
[Status 17:30:29 INFO] Starting Set [AERI set: name H314, 6 scans, 60 angle, D22500 command]
[Ingest 17:30:29 INFO] Sending XML status message
[Status 17:30:29 INFO] Mirror angle: 60
[Mirror 17:30:29 INFO] rotating to position H
[Status 17:30:30 INFO] .SET file for ACQ96 ready
[Ingest 17:30:30 INFO] Starting acquisition
[Status 17:30:31 INFO] reading housekeeping
[Status 17:30:48 INFO] acquire complete
[Status 17:30:49 INFO] writing housekeeping
[Sequencer 17:30:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:30:49 INFO] incremented H scene to 314 completed views
[Sequencer 17:30:49 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:30:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:30:49 INFO] incremented to [AERI set: name S314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:30:49 INFO] H314.SIG(18)
[sigmove 17:30:49 DEBUG] transformed H314Ma.SPC -> H314MA.SPC
[sigmove 17:30:49 DEBUG] transformed H314Mb.SPC -> H314MB.SPC
[sigmove 17:30:49 DEBUG] transformed H314Mc.SPC -> H314MC.SPC
[sigmove 17:30:49 DEBUG] transformed H314Md.SPC -> H314MD.SPC
[sigmove 17:30:49 DEBUG] transformed H314Me.SPC -> H314ME.SPC
[sigmove 17:30:49 DEBUG] transformed H314Mf.SPC -> H314MF.SPC
[Status 17:30:49 INFO] data for H314 transferred to science data processing
[Tidy 17:30:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:30:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:30:49 INFO] resetting WatchDogTimer
[Status 17:30:50 INFO] Starting Set [AERI set: name S314, 6 scans, 0 angle, D16300 command]
[Ingest 17:30:50 INFO] Sending XML status message
[Status 17:30:50 INFO] Mirror angle: 0
[Mirror 17:30:50 INFO] rotating to position S
[Status 17:30:51 INFO] .SET file for ACQ96 ready
[Ingest 17:30:52 INFO] Starting acquisition
[Status 17:30:52 INFO] reading housekeeping
[Status 17:31:10 INFO] acquire complete
[Status 17:31:11 INFO] writing housekeeping
[Sequencer 17:31:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:31:11 INFO] incremented S scene to 314 completed views
[Sequencer 17:31:11 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:31:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:31:11 INFO] incremented to [AERI set: name T314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:31:11 INFO] S314.SIG(18)
[sigmove 17:31:11 DEBUG] transformed S314Ma.SPC -> S314MA.SPC
[sigmove 17:31:11 DEBUG] transformed S314Mb.SPC -> S314MB.SPC
[sigmove 17:31:11 DEBUG] transformed S314Mc.SPC -> S314MC.SPC
[sigmove 17:31:11 DEBUG] transformed S314Md.SPC -> S314MD.SPC
[sigmove 17:31:11 DEBUG] transformed S314Me.SPC -> S314ME.SPC
[sigmove 17:31:11 DEBUG] transformed S314Mf.SPC -> S314MF.SPC
[Status 17:31:11 INFO] data for S314 transferred to science data processing
[Tidy 17:31:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:31:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:31:11 INFO] resetting WatchDogTimer
[Status 17:31:11 INFO] Starting Set [AERI set: name T314, 6 scans, 0 angle, D16300 command]
[Ingest 17:31:11 INFO] Sending XML status message
[Status 17:31:11 INFO] Mirror angle: 0
[Mirror 17:31:12 INFO] rotating to position T
[Status 17:31:12 INFO] .SET file for ACQ96 ready
[Ingest 17:31:12 INFO] Starting acquisition
[Status 17:31:13 INFO] reading housekeeping
[Status 17:31:31 INFO] acquire complete
[Status 17:31:32 INFO] writing housekeeping
[Sequencer 17:31:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:31:32 INFO] incremented T scene to 314 completed views
[Sequencer 17:31:32 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:31:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:31:32 INFO] incremented to [AERI set: name U314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:31:32 INFO] T314.SIG(18)
[sigmove 17:31:32 DEBUG] transformed T314Ma.SPC -> T314MA.SPC
[sigmove 17:31:32 DEBUG] transformed T314Mb.SPC -> T314MB.SPC
[sigmove 17:31:32 DEBUG] transformed T314Mc.SPC -> T314MC.SPC
[sigmove 17:31:32 DEBUG] transformed T314Md.SPC -> T314MD.SPC
[sigmove 17:31:32 DEBUG] transformed T314Me.SPC -> T314ME.SPC
[sigmove 17:31:32 DEBUG] transformed T314Mf.SPC -> T314MF.SPC
[Status 17:31:32 INFO] data for T314 transferred to science data processing
[Tidy 17:31:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:31:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:31:32 INFO] resetting WatchDogTimer
[Status 17:31:32 INFO] Starting Set [AERI set: name U314, 6 scans, 0 angle, D16300 command]
[Ingest 17:31:32 INFO] Sending XML status message
[Status 17:31:32 INFO] Mirror angle: 0
[Mirror 17:31:33 INFO] rotating to position U
[Status 17:31:33 INFO] .SET file for ACQ96 ready
[Ingest 17:31:34 INFO] Starting acquisition
[Status 17:31:34 INFO] reading housekeeping
[Status 17:31:51 INFO] acquire complete
[Status 17:31:52 INFO] writing housekeeping
[Sequencer 17:31:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:31:52 INFO] incremented U scene to 314 completed views
[Sequencer 17:31:52 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:31:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:31:52 INFO] incremented to [AERI set: name V314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:31:52 INFO] U314.SIG(18)
[sigmove 17:31:52 DEBUG] transformed U314Ma.SPC -> U314MA.SPC
[sigmove 17:31:52 DEBUG] transformed U314Mb.SPC -> U314MB.SPC
[sigmove 17:31:52 DEBUG] transformed U314Mc.SPC -> U314MC.SPC
[sigmove 17:31:52 DEBUG] transformed U314Md.SPC -> U314MD.SPC
[sigmove 17:31:52 DEBUG] transformed U314Me.SPC -> U314ME.SPC
[sigmove 17:31:52 DEBUG] transformed U314Mf.SPC -> U314MF.SPC
[Status 17:31:52 INFO] data for U314 transferred to science data processing
[Tidy 17:31:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:31:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:31:52 INFO] resetting WatchDogTimer
[Status 17:31:53 INFO] Starting Set [AERI set: name V314, 6 scans, 0 angle, D16300 command]
[Ingest 17:31:53 INFO] Sending XML status message
[Status 17:31:53 INFO] Mirror angle: 0
[Mirror 17:31:53 INFO] rotating to position V
[Status 17:31:54 INFO] .SET file for ACQ96 ready
[Ingest 17:31:54 INFO] Starting acquisition
[Status 17:31:54 INFO] reading housekeeping
[Status 17:32:11 INFO] acquire complete
[Status 17:32:12 INFO] writing housekeeping
[Sequencer 17:32:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:32:12 INFO] incremented V scene to 314 completed views
[Sequencer 17:32:12 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:32:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:32:12 INFO] incremented to [AERI set: name W314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:32:12 INFO] V314.SIG(18)
[sigmove 17:32:12 DEBUG] transformed V314Ma.SPC -> V314MA.SPC
[sigmove 17:32:12 DEBUG] transformed V314Mb.SPC -> V314MB.SPC
[sigmove 17:32:12 DEBUG] transformed V314Mc.SPC -> V314MC.SPC
[sigmove 17:32:12 DEBUG] transformed V314Md.SPC -> V314MD.SPC
[sigmove 17:32:12 DEBUG] transformed V314Me.SPC -> V314ME.SPC
[sigmove 17:32:12 DEBUG] transformed V314Mf.SPC -> V314MF.SPC
[Status 17:32:12 INFO] data for V314 transferred to science data processing
[Tidy 17:32:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:32:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:32:12 INFO] resetting WatchDogTimer
[Status 17:32:13 INFO] Starting Set [AERI set: name W314, 6 scans, 0 angle, D16300 command]
[Ingest 17:32:13 INFO] Sending XML status message
[Status 17:32:13 INFO] Mirror angle: 0
[Mirror 17:32:13 INFO] rotating to position W
[Status 17:32:14 INFO] .SET file for ACQ96 ready
[Ingest 17:32:14 INFO] Starting acquisition
[Status 17:32:14 INFO] reading housekeeping
[Status 17:32:33 INFO] acquire complete
[Status 17:32:34 INFO] writing housekeeping
[Sequencer 17:32:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:32:34 INFO] incremented W scene to 314 completed views
[Sequencer 17:32:34 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:32:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:32:34 INFO] incremented to [AERI set: name X314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:32:34 INFO] W314.SIG(18)
[sigmove 17:32:34 DEBUG] transformed W314Ma.SPC -> W314MA.SPC
[sigmove 17:32:34 DEBUG] transformed W314Mb.SPC -> W314MB.SPC
[sigmove 17:32:34 DEBUG] transformed W314Mc.SPC -> W314MC.SPC
[sigmove 17:32:34 DEBUG] transformed W314Md.SPC -> W314MD.SPC
[sigmove 17:32:34 DEBUG] transformed W314Me.SPC -> W314ME.SPC
[sigmove 17:32:34 DEBUG] transformed W314Mf.SPC -> W314MF.SPC
[Status 17:32:34 INFO] data for W314 transferred to science data processing
[Tidy 17:32:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:32:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:32:34 INFO] resetting WatchDogTimer
[Status 17:32:34 INFO] Starting Set [AERI set: name X314, 6 scans, 0 angle, D16300 command]
[Ingest 17:32:34 INFO] Sending XML status message
[Status 17:32:34 INFO] Mirror angle: 0
[Mirror 17:32:35 INFO] rotating to position X
[Status 17:32:35 INFO] .SET file for ACQ96 ready
[Ingest 17:32:35 INFO] Starting acquisition
[Status 17:32:36 INFO] reading housekeeping
[Status 17:32:54 INFO] acquire complete
[Status 17:32:55 INFO] writing housekeeping
[Sequencer 17:32:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:32:55 INFO] incremented X scene to 314 completed views
[Sequencer 17:32:55 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:32:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:32:55 INFO] incremented to [AERI set: name Y314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:32:55 INFO] X314.SIG(18)
[sigmove 17:32:55 DEBUG] transformed X314Ma.SPC -> X314MA.SPC
[sigmove 17:32:55 DEBUG] transformed X314Mb.SPC -> X314MB.SPC
[sigmove 17:32:55 DEBUG] transformed X314Mc.SPC -> X314MC.SPC
[sigmove 17:32:55 DEBUG] transformed X314Md.SPC -> X314MD.SPC
[sigmove 17:32:55 DEBUG] transformed X314Me.SPC -> X314ME.SPC
[sigmove 17:32:55 DEBUG] transformed X314Mf.SPC -> X314MF.SPC
[Status 17:32:55 INFO] data for X314 transferred to science data processing
[Tidy 17:32:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:32:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:32:55 INFO] resetting WatchDogTimer
[Status 17:32:55 INFO] Starting Set [AERI set: name Y314, 6 scans, 0 angle, D16300 command]
[Ingest 17:32:55 INFO] Sending XML status message
[Status 17:32:55 INFO] Mirror angle: 0
[Mirror 17:32:56 INFO] rotating to position Y
[Status 17:32:56 INFO] .SET file for ACQ96 ready
[Ingest 17:32:57 INFO] Starting acquisition
[Status 17:32:57 INFO] reading housekeeping
[Status 17:33:14 INFO] acquire complete
[Status 17:33:15 INFO] writing housekeeping
[Sequencer 17:33:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:33:15 INFO] incremented Y scene to 314 completed views
[Sequencer 17:33:15 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:33:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:33:15 INFO] incremented to [AERI set: name Z314, 6 scans, 0 angle, D16300 command] set
[sigmove 17:33:15 INFO] Y314.SIG(18)
[sigmove 17:33:15 DEBUG] transformed Y314Ma.SPC -> Y314MA.SPC
[sigmove 17:33:15 DEBUG] transformed Y314Mb.SPC -> Y314MB.SPC
[sigmove 17:33:15 DEBUG] transformed Y314Mc.SPC -> Y314MC.SPC
[sigmove 17:33:15 DEBUG] transformed Y314Md.SPC -> Y314MD.SPC
[sigmove 17:33:15 DEBUG] transformed Y314Me.SPC -> Y314ME.SPC
[sigmove 17:33:15 DEBUG] transformed Y314Mf.SPC -> Y314MF.SPC
[Status 17:33:15 INFO] data for Y314 transferred to science data processing
[Tidy 17:33:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:33:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:33:15 INFO] resetting WatchDogTimer
[Status 17:33:16 INFO] Starting Set [AERI set: name Z314, 6 scans, 0 angle, D16300 command]
[Ingest 17:33:16 INFO] Sending XML status message
[Status 17:33:16 INFO] Mirror angle: 0
[Mirror 17:33:16 INFO] rotating to position Z
[Status 17:33:17 INFO] .SET file for ACQ96 ready
[Ingest 17:33:17 INFO] Starting acquisition
[Status 17:33:17 INFO] reading housekeeping
[Status 17:33:34 INFO] acquire complete
[Status 17:33:35 INFO] writing housekeeping
[Sequencer 17:33:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:33:35 INFO] incremented Z scene to 314 completed views
[Sequencer 17:33:35 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:33:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:33:35 INFO] incremented to [AERI set: name H315, 6 scans, 60 angle, D22500 command] set
[sigmove 17:33:35 INFO] Z314.SIG(18)
[sigmove 17:33:35 DEBUG] transformed Z314Ma.SPC -> Z314MA.SPC
[sigmove 17:33:35 DEBUG] transformed Z314Mb.SPC -> Z314MB.SPC
[sigmove 17:33:35 DEBUG] transformed Z314Mc.SPC -> Z314MC.SPC
[sigmove 17:33:35 DEBUG] transformed Z314Md.SPC -> Z314MD.SPC
[sigmove 17:33:35 DEBUG] transformed Z314Me.SPC -> Z314ME.SPC
[sigmove 17:33:35 DEBUG] transformed Z314Mf.SPC -> Z314MF.SPC
[Status 17:33:35 INFO] data for Z314 transferred to science data processing
[Tidy 17:33:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:33:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:33:35 INFO] resetting WatchDogTimer
[Status 17:33:36 INFO] Starting Set [AERI set: name H315, 6 scans, 60 angle, D22500 command]
[Ingest 17:33:36 INFO] Sending XML status message
[Status 17:33:36 INFO] Mirror angle: 60
[Mirror 17:33:36 INFO] rotating to position H
[Status 17:33:37 INFO] .SET file for ACQ96 ready
[Ingest 17:33:38 INFO] Starting acquisition
[Status 17:33:38 INFO] reading housekeeping
[Status 17:33:56 INFO] acquire complete
[Status 17:33:57 INFO] writing housekeeping
[Sequencer 17:33:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:33:57 INFO] incremented H scene to 315 completed views
[Sequencer 17:33:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:33:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:33:57 INFO] incremented to [AERI set: name A315, 6 scans, 120 angle, D28300 command] set
[sigmove 17:33:57 INFO] H315.SIG(18)
[sigmove 17:33:57 DEBUG] transformed H315Ma.SPC -> H315MA.SPC
[sigmove 17:33:57 DEBUG] transformed H315Mb.SPC -> H315MB.SPC
[sigmove 17:33:57 DEBUG] transformed H315Mc.SPC -> H315MC.SPC
[sigmove 17:33:57 DEBUG] transformed H315Md.SPC -> H315MD.SPC
[sigmove 17:33:57 DEBUG] transformed H315Me.SPC -> H315ME.SPC
[sigmove 17:33:57 DEBUG] transformed H315Mf.SPC -> H315MF.SPC
[Status 17:33:57 INFO] data for H315 transferred to science data processing
[Tidy 17:33:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:33:57 INFO] A313.FIN(19),H313.FIN(19),S313.FIN(19),T313.FIN(19),U313.FIN(19),V313.FIN(19),W313.FIN(19),X313.FIN(19),Y313.FIN(19),Z313.FIN(19),A314.FIN(19),H314.FIN(19),S314.FIN(19),T314.FIN(19),U314.FIN(19),V314.FIN(19),W314.FIN(19),X314.FIN(19),Y314.FIN(19),Z314.FIN(19)
[sigmove 17:33:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:33:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:34:04 DEBUG] done zipping
[WatchDog 17:34:04 INFO] resetting WatchDogTimer
[Status 17:34:04 INFO] Starting Set [AERI set: name A315, 6 scans, 120 angle, D28300 command]
[Ingest 17:34:04 INFO] Sending XML status message
[Status 17:34:04 INFO] Mirror angle: 120
[Mirror 17:34:05 INFO] rotating to position A
[Status 17:34:06 INFO] .SET file for ACQ96 ready
[Ingest 17:34:06 INFO] Starting acquisition
[Status 17:34:07 INFO] reading housekeeping
[Status 17:34:24 INFO] acquire complete
[Status 17:34:25 INFO] writing housekeeping
[Sequencer 17:34:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:34:25 INFO] incremented A scene to 315 completed views
[Sequencer 17:34:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:34:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:34:25 INFO] incremented to [AERI set: name S315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:34:25 INFO] A315.SIG(18)
[sigmove 17:34:25 DEBUG] transformed A315Ma.SPC -> A315MA.SPC
[sigmove 17:34:25 DEBUG] transformed A315Mb.SPC -> A315MB.SPC
[sigmove 17:34:25 DEBUG] transformed A315Mc.SPC -> A315MC.SPC
[sigmove 17:34:25 DEBUG] transformed A315Md.SPC -> A315MD.SPC
[sigmove 17:34:25 DEBUG] transformed A315Me.SPC -> A315ME.SPC
[sigmove 17:34:25 DEBUG] transformed A315Mf.SPC -> A315MF.SPC
[Status 17:34:25 INFO] data for A315 transferred to science data processing
[Tidy 17:34:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:34:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:34:25 INFO] resetting WatchDogTimer
[Status 17:34:25 INFO] Starting Set [AERI set: name S315, 6 scans, 0 angle, D16300 command]
[Ingest 17:34:25 INFO] Sending XML status message
[Status 17:34:25 INFO] Mirror angle: 0
[Mirror 17:34:26 INFO] rotating to position S
[Status 17:34:27 INFO] .SET file for ACQ96 ready
[Ingest 17:34:27 INFO] Starting acquisition
[Status 17:34:28 INFO] reading housekeeping
[Status 17:34:45 INFO] acquire complete
[Status 17:34:46 INFO] writing housekeeping
[Sequencer 17:34:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:34:46 INFO] incremented S scene to 315 completed views
[Sequencer 17:34:46 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:34:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:34:46 INFO] incremented to [AERI set: name T315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:34:46 INFO] S315.SIG(18)
[sigmove 17:34:46 DEBUG] transformed S315Ma.SPC -> S315MA.SPC
[sigmove 17:34:46 DEBUG] transformed S315Mb.SPC -> S315MB.SPC
[sigmove 17:34:46 DEBUG] transformed S315Mc.SPC -> S315MC.SPC
[sigmove 17:34:46 DEBUG] transformed S315Md.SPC -> S315MD.SPC
[sigmove 17:34:46 DEBUG] transformed S315Me.SPC -> S315ME.SPC
[sigmove 17:34:46 DEBUG] transformed S315Mf.SPC -> S315MF.SPC
[Status 17:34:46 INFO] data for S315 transferred to science data processing
[Tidy 17:34:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:34:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:34:46 INFO] resetting WatchDogTimer
[Status 17:34:47 INFO] Starting Set [AERI set: name T315, 6 scans, 0 angle, D16300 command]
[Ingest 17:34:47 INFO] Sending XML status message
[Status 17:34:47 INFO] Mirror angle: 0
[Mirror 17:34:47 INFO] rotating to position T
[Status 17:34:47 INFO] .SET file for ACQ96 ready
[Ingest 17:34:48 INFO] Starting acquisition
[Status 17:34:48 INFO] reading housekeeping
[Status 17:35:06 INFO] acquire complete
[Status 17:35:08 INFO] writing housekeeping
[Sequencer 17:35:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:35:08 INFO] incremented T scene to 315 completed views
[Sequencer 17:35:08 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:35:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:35:08 INFO] incremented to [AERI set: name U315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:35:08 INFO] T315.SIG(18)
[sigmove 17:35:08 DEBUG] transformed T315Ma.SPC -> T315MA.SPC
[sigmove 17:35:08 DEBUG] transformed T315Mb.SPC -> T315MB.SPC
[sigmove 17:35:08 DEBUG] transformed T315Mc.SPC -> T315MC.SPC
[sigmove 17:35:08 DEBUG] transformed T315Md.SPC -> T315MD.SPC
[sigmove 17:35:08 DEBUG] transformed T315Me.SPC -> T315ME.SPC
[sigmove 17:35:08 DEBUG] transformed T315Mf.SPC -> T315MF.SPC
[Status 17:35:08 INFO] data for T315 transferred to science data processing
[Tidy 17:35:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:35:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:35:08 INFO] resetting WatchDogTimer
[Status 17:35:08 INFO] Starting Set [AERI set: name U315, 6 scans, 0 angle, D16300 command]
[Ingest 17:35:08 INFO] Sending XML status message
[Status 17:35:08 INFO] Mirror angle: 0
[Mirror 17:35:09 INFO] rotating to position U
[Status 17:35:09 INFO] .SET file for ACQ96 ready
[Ingest 17:35:09 INFO] Starting acquisition
[Status 17:35:10 INFO] reading housekeeping
[Status 17:35:28 INFO] acquire complete
[Status 17:35:29 INFO] writing housekeeping
[Sequencer 17:35:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:35:29 INFO] incremented U scene to 315 completed views
[Sequencer 17:35:29 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:35:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:35:29 INFO] incremented to [AERI set: name V315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:35:29 INFO] U315.SIG(18)
[sigmove 17:35:29 DEBUG] transformed U315Ma.SPC -> U315MA.SPC
[sigmove 17:35:29 DEBUG] transformed U315Mb.SPC -> U315MB.SPC
[sigmove 17:35:29 DEBUG] transformed U315Mc.SPC -> U315MC.SPC
[sigmove 17:35:29 DEBUG] transformed U315Md.SPC -> U315MD.SPC
[sigmove 17:35:29 DEBUG] transformed U315Me.SPC -> U315ME.SPC
[sigmove 17:35:29 DEBUG] transformed U315Mf.SPC -> U315MF.SPC
[Status 17:35:29 INFO] data for U315 transferred to science data processing
[Tidy 17:35:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:35:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:35:29 INFO] resetting WatchDogTimer
[Status 17:35:29 INFO] Starting Set [AERI set: name V315, 6 scans, 0 angle, D16300 command]
[Ingest 17:35:29 INFO] Sending XML status message
[Status 17:35:29 INFO] Mirror angle: 0
[Mirror 17:35:30 INFO] rotating to position V
[Status 17:35:30 INFO] .SET file for ACQ96 ready
[Ingest 17:35:30 INFO] Starting acquisition
[Status 17:35:31 INFO] reading housekeeping
[Status 17:35:49 INFO] acquire complete
[Status 17:35:50 INFO] writing housekeeping
[Sequencer 17:35:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:35:50 INFO] incremented V scene to 315 completed views
[Sequencer 17:35:50 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:35:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:35:50 INFO] incremented to [AERI set: name W315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:35:50 INFO] V315.SIG(18)
[sigmove 17:35:50 DEBUG] transformed V315Ma.SPC -> V315MA.SPC
[sigmove 17:35:50 DEBUG] transformed V315Mb.SPC -> V315MB.SPC
[sigmove 17:35:50 DEBUG] transformed V315Mc.SPC -> V315MC.SPC
[sigmove 17:35:50 DEBUG] transformed V315Md.SPC -> V315MD.SPC
[sigmove 17:35:50 DEBUG] transformed V315Me.SPC -> V315ME.SPC
[sigmove 17:35:50 DEBUG] transformed V315Mf.SPC -> V315MF.SPC
[Status 17:35:50 INFO] data for V315 transferred to science data processing
[Tidy 17:35:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:35:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:35:50 INFO] resetting WatchDogTimer
[Status 17:35:51 INFO] Starting Set [AERI set: name W315, 6 scans, 0 angle, D16300 command]
[Ingest 17:35:51 INFO] Sending XML status message
[Status 17:35:51 INFO] Mirror angle: 0
[Mirror 17:35:51 INFO] rotating to position W
[Status 17:35:51 INFO] .SET file for ACQ96 ready
[Ingest 17:35:52 INFO] Starting acquisition
[Status 17:35:52 INFO] reading housekeeping
[Status 17:36:10 INFO] acquire complete
[Status 17:36:11 INFO] writing housekeeping
[Sequencer 17:36:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:36:11 INFO] incremented W scene to 315 completed views
[Sequencer 17:36:11 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:36:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:36:11 INFO] incremented to [AERI set: name X315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:36:11 INFO] W315.SIG(18)
[sigmove 17:36:11 DEBUG] transformed W315Ma.SPC -> W315MA.SPC
[sigmove 17:36:11 DEBUG] transformed W315Mb.SPC -> W315MB.SPC
[sigmove 17:36:11 DEBUG] transformed W315Mc.SPC -> W315MC.SPC
[sigmove 17:36:11 DEBUG] transformed W315Md.SPC -> W315MD.SPC
[sigmove 17:36:11 DEBUG] transformed W315Me.SPC -> W315ME.SPC
[sigmove 17:36:11 DEBUG] transformed W315Mf.SPC -> W315MF.SPC
[Status 17:36:11 INFO] data for W315 transferred to science data processing
[Tidy 17:36:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:36:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:36:11 INFO] resetting WatchDogTimer
[Status 17:36:12 INFO] Starting Set [AERI set: name X315, 6 scans, 0 angle, D16300 command]
[Ingest 17:36:12 INFO] Sending XML status message
[Status 17:36:12 INFO] Mirror angle: 0
[Mirror 17:36:12 INFO] rotating to position X
[Status 17:36:13 INFO] .SET file for ACQ96 ready
[Ingest 17:36:13 INFO] Starting acquisition
[Status 17:36:13 INFO] reading housekeeping
[Status 17:36:30 INFO] acquire complete
[Status 17:36:31 INFO] writing housekeeping
[Sequencer 17:36:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:36:32 INFO] incremented X scene to 315 completed views
[Sequencer 17:36:32 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:36:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:36:32 INFO] incremented to [AERI set: name Y315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:36:32 INFO] X315.SIG(18)
[sigmove 17:36:32 DEBUG] transformed X315Ma.SPC -> X315MA.SPC
[sigmove 17:36:32 DEBUG] transformed X315Mb.SPC -> X315MB.SPC
[sigmove 17:36:32 DEBUG] transformed X315Mc.SPC -> X315MC.SPC
[sigmove 17:36:32 DEBUG] transformed X315Md.SPC -> X315MD.SPC
[sigmove 17:36:32 DEBUG] transformed X315Me.SPC -> X315ME.SPC
[sigmove 17:36:32 DEBUG] transformed X315Mf.SPC -> X315MF.SPC
[Status 17:36:32 INFO] data for X315 transferred to science data processing
[Tidy 17:36:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:36:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:36:32 INFO] resetting WatchDogTimer
[Status 17:36:32 INFO] Starting Set [AERI set: name Y315, 6 scans, 0 angle, D16300 command]
[Ingest 17:36:32 INFO] Sending XML status message
[Status 17:36:32 INFO] Mirror angle: 0
[Mirror 17:36:32 INFO] rotating to position Y
[Status 17:36:33 INFO] .SET file for ACQ96 ready
[Ingest 17:36:33 INFO] Starting acquisition
[Status 17:36:34 INFO] reading housekeeping
[Status 17:36:52 INFO] acquire complete
[Status 17:36:53 INFO] writing housekeeping
[Sequencer 17:36:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:36:53 INFO] incremented Y scene to 315 completed views
[Sequencer 17:36:53 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:36:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:36:53 INFO] incremented to [AERI set: name Z315, 6 scans, 0 angle, D16300 command] set
[sigmove 17:36:53 INFO] Y315.SIG(18)
[sigmove 17:36:53 DEBUG] transformed Y315Ma.SPC -> Y315MA.SPC
[sigmove 17:36:53 DEBUG] transformed Y315Mb.SPC -> Y315MB.SPC
[sigmove 17:36:53 DEBUG] transformed Y315Mc.SPC -> Y315MC.SPC
[sigmove 17:36:53 DEBUG] transformed Y315Md.SPC -> Y315MD.SPC
[sigmove 17:36:53 DEBUG] transformed Y315Me.SPC -> Y315ME.SPC
[sigmove 17:36:53 DEBUG] transformed Y315Mf.SPC -> Y315MF.SPC
[Status 17:36:53 INFO] data for Y315 transferred to science data processing
[Tidy 17:36:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:36:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:36:53 INFO] resetting WatchDogTimer
[Status 17:36:53 INFO] Starting Set [AERI set: name Z315, 6 scans, 0 angle, D16300 command]
[Ingest 17:36:53 INFO] Sending XML status message
[Status 17:36:53 INFO] Mirror angle: 0
[Mirror 17:36:54 INFO] rotating to position Z
[Status 17:36:54 INFO] .SET file for ACQ96 ready
[Ingest 17:36:54 INFO] Starting acquisition
[Status 17:36:55 INFO] reading housekeeping
[Status 17:37:13 INFO] acquire complete
[Status 17:37:14 INFO] writing housekeeping
[Sequencer 17:37:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:37:14 INFO] incremented Z scene to 315 completed views
[Sequencer 17:37:14 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:37:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:37:14 INFO] incremented to [AERI set: name A316, 6 scans, 120 angle, D28300 command] set
[sigmove 17:37:14 INFO] Z315.SIG(18)
[sigmove 17:37:14 DEBUG] transformed Z315Ma.SPC -> Z315MA.SPC
[sigmove 17:37:14 DEBUG] transformed Z315Mb.SPC -> Z315MB.SPC
[sigmove 17:37:14 DEBUG] transformed Z315Mc.SPC -> Z315MC.SPC
[sigmove 17:37:14 DEBUG] transformed Z315Md.SPC -> Z315MD.SPC
[sigmove 17:37:14 DEBUG] transformed Z315Me.SPC -> Z315ME.SPC
[sigmove 17:37:14 DEBUG] transformed Z315Mf.SPC -> Z315MF.SPC
[Status 17:37:14 INFO] data for Z315 transferred to science data processing
[Tidy 17:37:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:37:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:37:14 INFO] resetting WatchDogTimer
[Status 17:37:15 INFO] Starting Set [AERI set: name A316, 6 scans, 120 angle, D28300 command]
[Ingest 17:37:15 INFO] Sending XML status message
[Status 17:37:15 INFO] Mirror angle: 120
[Mirror 17:37:15 INFO] rotating to position A
[Status 17:37:16 INFO] .SET file for ACQ96 ready
[Ingest 17:37:17 INFO] Starting acquisition
[Status 17:37:17 INFO] reading housekeeping
[Status 17:37:34 INFO] acquire complete
[Status 17:37:35 INFO] writing housekeeping
[Sequencer 17:37:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:37:35 INFO] incremented A scene to 316 completed views
[Sequencer 17:37:35 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:37:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:37:35 INFO] incremented to [AERI set: name H316, 6 scans, 60 angle, D22500 command] set
[sigmove 17:37:35 INFO] A316.SIG(18)
[sigmove 17:37:35 DEBUG] transformed A316Ma.SPC -> A316MA.SPC
[sigmove 17:37:35 DEBUG] transformed A316Mb.SPC -> A316MB.SPC
[sigmove 17:37:35 DEBUG] transformed A316Mc.SPC -> A316MC.SPC
[sigmove 17:37:35 DEBUG] transformed A316Md.SPC -> A316MD.SPC
[sigmove 17:37:35 DEBUG] transformed A316Me.SPC -> A316ME.SPC
[sigmove 17:37:35 DEBUG] transformed A316Mf.SPC -> A316MF.SPC
[Status 17:37:35 INFO] data for A316 transferred to science data processing
[Tidy 17:37:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:37:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:37:35 INFO] resetting WatchDogTimer
[Status 17:37:36 INFO] Starting Set [AERI set: name H316, 6 scans, 60 angle, D22500 command]
[Ingest 17:37:36 INFO] Sending XML status message
[Status 17:37:36 INFO] Mirror angle: 60
[Mirror 17:37:36 INFO] rotating to position H
[Status 17:37:37 INFO] .SET file for ACQ96 ready
[Ingest 17:37:38 INFO] Starting acquisition
[Status 17:37:38 INFO] reading housekeeping
[Status 17:37:56 INFO] acquire complete
[Status 17:37:57 INFO] writing housekeeping
[Sequencer 17:37:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:37:57 INFO] incremented H scene to 316 completed views
[Sequencer 17:37:57 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:37:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:37:57 INFO] incremented to [AERI set: name S316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:37:57 INFO] H316.SIG(18)
[sigmove 17:37:57 DEBUG] transformed H316Ma.SPC -> H316MA.SPC
[sigmove 17:37:57 DEBUG] transformed H316Mb.SPC -> H316MB.SPC
[sigmove 17:37:57 DEBUG] transformed H316Mc.SPC -> H316MC.SPC
[sigmove 17:37:57 DEBUG] transformed H316Md.SPC -> H316MD.SPC
[sigmove 17:37:57 DEBUG] transformed H316Me.SPC -> H316ME.SPC
[sigmove 17:37:57 DEBUG] transformed H316Mf.SPC -> H316MF.SPC
[Status 17:37:57 INFO] data for H316 transferred to science data processing
[Tidy 17:37:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:37:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:37:57 INFO] resetting WatchDogTimer
[Status 17:37:57 INFO] Starting Set [AERI set: name S316, 6 scans, 0 angle, D16300 command]
[Ingest 17:37:57 INFO] Sending XML status message
[Status 17:37:57 INFO] Mirror angle: 0
[Mirror 17:37:58 INFO] rotating to position S
[Status 17:37:59 INFO] .SET file for ACQ96 ready
[Ingest 17:37:59 INFO] Starting acquisition
[Status 17:37:59 INFO] reading housekeeping
[Status 17:38:17 INFO] acquire complete
[Status 17:38:18 INFO] writing housekeeping
[Sequencer 17:38:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:38:18 INFO] incremented S scene to 316 completed views
[Sequencer 17:38:18 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:38:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:38:18 INFO] incremented to [AERI set: name T316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:38:18 INFO] S316.SIG(18)
[sigmove 17:38:18 DEBUG] transformed S316Ma.SPC -> S316MA.SPC
[sigmove 17:38:18 DEBUG] transformed S316Mb.SPC -> S316MB.SPC
[sigmove 17:38:18 DEBUG] transformed S316Mc.SPC -> S316MC.SPC
[sigmove 17:38:18 DEBUG] transformed S316Md.SPC -> S316MD.SPC
[sigmove 17:38:18 DEBUG] transformed S316Me.SPC -> S316ME.SPC
[sigmove 17:38:18 DEBUG] transformed S316Mf.SPC -> S316MF.SPC
[Status 17:38:18 INFO] data for S316 transferred to science data processing
[Tidy 17:38:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:38:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:38:18 INFO] resetting WatchDogTimer
[Status 17:38:18 INFO] Starting Set [AERI set: name T316, 6 scans, 0 angle, D16300 command]
[Ingest 17:38:18 INFO] Sending XML status message
[Status 17:38:18 INFO] Mirror angle: 0
[Mirror 17:38:19 INFO] rotating to position T
[Status 17:38:20 INFO] .SET file for ACQ96 ready
[Ingest 17:38:20 INFO] Starting acquisition
[Status 17:38:22 INFO] reading housekeeping
[Status 17:38:40 INFO] acquire complete
[Status 17:38:41 INFO] writing housekeeping
[Sequencer 17:38:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:38:41 INFO] incremented T scene to 316 completed views
[Sequencer 17:38:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:38:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:38:41 INFO] incremented to [AERI set: name U316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:38:41 INFO] T316.SIG(18)
[sigmove 17:38:41 DEBUG] transformed T316Ma.SPC -> T316MA.SPC
[sigmove 17:38:41 DEBUG] transformed T316Mb.SPC -> T316MB.SPC
[sigmove 17:38:41 DEBUG] transformed T316Mc.SPC -> T316MC.SPC
[sigmove 17:38:41 DEBUG] transformed T316Md.SPC -> T316MD.SPC
[sigmove 17:38:41 DEBUG] transformed T316Me.SPC -> T316ME.SPC
[sigmove 17:38:41 DEBUG] transformed T316Mf.SPC -> T316MF.SPC
[Status 17:38:41 INFO] data for T316 transferred to science data processing
[Tidy 17:38:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:38:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:38:41 INFO] resetting WatchDogTimer
[Status 17:38:41 INFO] Starting Set [AERI set: name U316, 6 scans, 0 angle, D16300 command]
[Ingest 17:38:41 INFO] Sending XML status message
[Status 17:38:41 INFO] Mirror angle: 0
[Mirror 17:38:41 INFO] rotating to position U
[Status 17:38:42 INFO] .SET file for ACQ96 ready
[Ingest 17:38:42 INFO] Starting acquisition
[Status 17:38:43 INFO] reading housekeeping
[Status 17:39:01 INFO] acquire complete
[Status 17:39:02 INFO] writing housekeeping
[Sequencer 17:39:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:39:02 INFO] incremented U scene to 316 completed views
[Sequencer 17:39:02 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:39:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:39:02 INFO] incremented to [AERI set: name V316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:39:02 INFO] U316.SIG(18)
[sigmove 17:39:02 DEBUG] transformed U316Ma.SPC -> U316MA.SPC
[sigmove 17:39:02 DEBUG] transformed U316Mb.SPC -> U316MB.SPC
[sigmove 17:39:02 DEBUG] transformed U316Mc.SPC -> U316MC.SPC
[sigmove 17:39:02 DEBUG] transformed U316Md.SPC -> U316MD.SPC
[sigmove 17:39:02 DEBUG] transformed U316Me.SPC -> U316ME.SPC
[sigmove 17:39:02 DEBUG] transformed U316Mf.SPC -> U316MF.SPC
[Status 17:39:02 INFO] data for U316 transferred to science data processing
[Tidy 17:39:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:39:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:39:02 INFO] resetting WatchDogTimer
[Status 17:39:02 INFO] Starting Set [AERI set: name V316, 6 scans, 0 angle, D16300 command]
[Ingest 17:39:02 INFO] Sending XML status message
[Status 17:39:02 INFO] Mirror angle: 0
[Mirror 17:39:03 INFO] rotating to position V
[Status 17:39:03 INFO] .SET file for ACQ96 ready
[Ingest 17:39:03 INFO] Starting acquisition
[Status 17:39:04 INFO] reading housekeeping
[Status 17:39:22 INFO] acquire complete
[Status 17:39:23 INFO] writing housekeeping
[Sequencer 17:39:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:39:23 INFO] incremented V scene to 316 completed views
[Sequencer 17:39:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:39:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:39:23 INFO] incremented to [AERI set: name W316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:39:23 INFO] V316.SIG(18)
[sigmove 17:39:23 DEBUG] transformed V316Ma.SPC -> V316MA.SPC
[sigmove 17:39:23 DEBUG] transformed V316Mb.SPC -> V316MB.SPC
[sigmove 17:39:23 DEBUG] transformed V316Mc.SPC -> V316MC.SPC
[sigmove 17:39:23 DEBUG] transformed V316Md.SPC -> V316MD.SPC
[sigmove 17:39:23 DEBUG] transformed V316Me.SPC -> V316ME.SPC
[sigmove 17:39:23 DEBUG] transformed V316Mf.SPC -> V316MF.SPC
[Status 17:39:23 INFO] data for V316 transferred to science data processing
[Tidy 17:39:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:39:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:39:23 INFO] resetting WatchDogTimer
[Status 17:39:24 INFO] Starting Set [AERI set: name W316, 6 scans, 0 angle, D16300 command]
[Ingest 17:39:24 INFO] Sending XML status message
[Status 17:39:24 INFO] Mirror angle: 0
[Mirror 17:39:24 INFO] rotating to position W
[Status 17:39:24 INFO] .SET file for ACQ96 ready
[Ingest 17:39:25 INFO] Starting acquisition
[Status 17:39:25 INFO] reading housekeeping
[Status 17:39:43 INFO] acquire complete
[Status 17:39:44 INFO] writing housekeeping
[Sequencer 17:39:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:39:44 INFO] incremented W scene to 316 completed views
[Sequencer 17:39:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:39:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:39:44 INFO] incremented to [AERI set: name X316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:39:44 INFO] W316.SIG(18)
[sigmove 17:39:44 DEBUG] transformed W316Ma.SPC -> W316MA.SPC
[sigmove 17:39:44 DEBUG] transformed W316Mb.SPC -> W316MB.SPC
[sigmove 17:39:44 DEBUG] transformed W316Mc.SPC -> W316MC.SPC
[sigmove 17:39:44 DEBUG] transformed W316Md.SPC -> W316MD.SPC
[sigmove 17:39:44 DEBUG] transformed W316Me.SPC -> W316ME.SPC
[sigmove 17:39:44 DEBUG] transformed W316Mf.SPC -> W316MF.SPC
[Status 17:39:44 INFO] data for W316 transferred to science data processing
[Tidy 17:39:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:39:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:39:44 INFO] resetting WatchDogTimer
[Status 17:39:45 INFO] Starting Set [AERI set: name X316, 6 scans, 0 angle, D16300 command]
[Ingest 17:39:45 INFO] Sending XML status message
[Status 17:39:45 INFO] Mirror angle: 0
[Mirror 17:39:45 INFO] rotating to position X
[Status 17:39:46 INFO] .SET file for ACQ96 ready
[Ingest 17:39:46 INFO] Starting acquisition
[Status 17:39:46 INFO] reading housekeeping
[Status 17:40:04 INFO] acquire complete
[Status 17:40:05 INFO] writing housekeeping
[Sequencer 17:40:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:40:05 INFO] incremented X scene to 316 completed views
[Sequencer 17:40:05 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:40:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:40:05 INFO] incremented to [AERI set: name Y316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:40:05 INFO] X316.SIG(18)
[sigmove 17:40:05 DEBUG] transformed X316Ma.SPC -> X316MA.SPC
[sigmove 17:40:05 DEBUG] transformed X316Mb.SPC -> X316MB.SPC
[sigmove 17:40:05 DEBUG] transformed X316Mc.SPC -> X316MC.SPC
[sigmove 17:40:05 DEBUG] transformed X316Md.SPC -> X316MD.SPC
[sigmove 17:40:05 DEBUG] transformed X316Me.SPC -> X316ME.SPC
[sigmove 17:40:05 DEBUG] transformed X316Mf.SPC -> X316MF.SPC
[Status 17:40:05 INFO] data for X316 transferred to science data processing
[Tidy 17:40:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:40:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:40:05 INFO] resetting WatchDogTimer
[Status 17:40:05 INFO] Starting Set [AERI set: name Y316, 6 scans, 0 angle, D16300 command]
[Ingest 17:40:05 INFO] Sending XML status message
[Status 17:40:05 INFO] Mirror angle: 0
[Mirror 17:40:05 INFO] rotating to position Y
[Status 17:40:06 INFO] .SET file for ACQ96 ready
[Ingest 17:40:06 INFO] Starting acquisition
[Status 17:40:07 INFO] reading housekeeping
[Status 17:40:24 INFO] acquire complete
[Status 17:40:25 INFO] writing housekeeping
[Sequencer 17:40:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:40:25 INFO] incremented Y scene to 316 completed views
[Sequencer 17:40:25 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:40:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:40:25 INFO] incremented to [AERI set: name Z316, 6 scans, 0 angle, D16300 command] set
[sigmove 17:40:25 INFO] Y316.SIG(18)
[sigmove 17:40:25 DEBUG] transformed Y316Ma.SPC -> Y316MA.SPC
[sigmove 17:40:25 DEBUG] transformed Y316Mb.SPC -> Y316MB.SPC
[sigmove 17:40:25 DEBUG] transformed Y316Mc.SPC -> Y316MC.SPC
[sigmove 17:40:25 DEBUG] transformed Y316Md.SPC -> Y316MD.SPC
[sigmove 17:40:25 DEBUG] transformed Y316Me.SPC -> Y316ME.SPC
[sigmove 17:40:25 DEBUG] transformed Y316Mf.SPC -> Y316MF.SPC
[Status 17:40:25 INFO] data for Y316 transferred to science data processing
[Tidy 17:40:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:40:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:40:25 INFO] resetting WatchDogTimer
[Status 17:40:25 INFO] Starting Set [AERI set: name Z316, 6 scans, 0 angle, D16300 command]
[Ingest 17:40:25 INFO] Sending XML status message
[Status 17:40:25 INFO] Mirror angle: 0
[Mirror 17:40:26 INFO] rotating to position Z
[Status 17:40:26 INFO] .SET file for ACQ96 ready
[Ingest 17:40:26 INFO] Starting acquisition
[Status 17:40:27 INFO] reading housekeeping
[Status 17:40:44 INFO] acquire complete
[Status 17:40:45 INFO] writing housekeeping
[Sequencer 17:40:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:40:45 INFO] incremented Z scene to 316 completed views
[Sequencer 17:40:45 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:40:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:40:45 INFO] incremented to [AERI set: name H317, 6 scans, 60 angle, D22500 command] set
[sigmove 17:40:45 INFO] Z316.SIG(18)
[sigmove 17:40:45 DEBUG] transformed Z316Ma.SPC -> Z316MA.SPC
[sigmove 17:40:45 DEBUG] transformed Z316Mb.SPC -> Z316MB.SPC
[sigmove 17:40:45 DEBUG] transformed Z316Mc.SPC -> Z316MC.SPC
[sigmove 17:40:45 DEBUG] transformed Z316Md.SPC -> Z316MD.SPC
[sigmove 17:40:45 DEBUG] transformed Z316Me.SPC -> Z316ME.SPC
[sigmove 17:40:45 DEBUG] transformed Z316Mf.SPC -> Z316MF.SPC
[Status 17:40:45 INFO] data for Z316 transferred to science data processing
[Tidy 17:40:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:40:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:40:45 INFO] resetting WatchDogTimer
[Status 17:40:45 INFO] Starting Set [AERI set: name H317, 6 scans, 60 angle, D22500 command]
[Ingest 17:40:45 INFO] Sending XML status message
[Status 17:40:45 INFO] Mirror angle: 60
[Mirror 17:40:46 INFO] rotating to position H
[Status 17:40:47 INFO] .SET file for ACQ96 ready
[Ingest 17:40:47 INFO] Starting acquisition
[Status 17:40:48 INFO] reading housekeeping
[Status 17:41:05 INFO] acquire complete
[Status 17:41:06 INFO] writing housekeeping
[Sequencer 17:41:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:41:06 INFO] incremented H scene to 317 completed views
[Sequencer 17:41:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:41:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:41:06 INFO] incremented to [AERI set: name A317, 6 scans, 120 angle, D28300 command] set
[sigmove 17:41:06 INFO] H317.SIG(18)
[sigmove 17:41:06 DEBUG] transformed H317Ma.SPC -> H317MA.SPC
[sigmove 17:41:06 DEBUG] transformed H317Mb.SPC -> H317MB.SPC
[sigmove 17:41:06 DEBUG] transformed H317Mc.SPC -> H317MC.SPC
[sigmove 17:41:06 DEBUG] transformed H317Md.SPC -> H317MD.SPC
[sigmove 17:41:06 DEBUG] transformed H317Me.SPC -> H317ME.SPC
[sigmove 17:41:06 DEBUG] transformed H317Mf.SPC -> H317MF.SPC
[Status 17:41:06 INFO] data for H317 transferred to science data processing
[Tidy 17:41:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:41:06 INFO] A315.FIN(19),H315.FIN(19),S315.FIN(19),T315.FIN(19),U315.FIN(19),V315.FIN(19),W315.FIN(19),X315.FIN(19),Y315.FIN(19),Z315.FIN(19),A316.FIN(19),H316.FIN(19),S316.FIN(19),T316.FIN(19),U316.FIN(19),V316.FIN(19),W316.FIN(19),X316.FIN(19),Y316.FIN(19),Z316.FIN(19)
[sigmove 17:41:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:41:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:41:12 DEBUG] done zipping
[WatchDog 17:41:12 INFO] resetting WatchDogTimer
[Status 17:41:13 INFO] Starting Set [AERI set: name A317, 6 scans, 120 angle, D28300 command]
[Ingest 17:41:13 INFO] Sending XML status message
[Status 17:41:13 INFO] Mirror angle: 120
[Mirror 17:41:13 INFO] rotating to position A
[Status 17:41:14 INFO] .SET file for ACQ96 ready
[Ingest 17:41:14 INFO] Starting acquisition
[Status 17:41:15 INFO] reading housekeeping
[Status 17:41:33 INFO] acquire complete
[Status 17:41:34 INFO] writing housekeeping
[Sequencer 17:41:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:41:34 INFO] incremented A scene to 317 completed views
[Sequencer 17:41:34 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:41:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:41:34 INFO] incremented to [AERI set: name S317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:41:34 INFO] A317.SIG(18)
[sigmove 17:41:34 DEBUG] transformed A317Ma.SPC -> A317MA.SPC
[sigmove 17:41:34 DEBUG] transformed A317Mb.SPC -> A317MB.SPC
[sigmove 17:41:34 DEBUG] transformed A317Mc.SPC -> A317MC.SPC
[sigmove 17:41:34 DEBUG] transformed A317Md.SPC -> A317MD.SPC
[sigmove 17:41:34 DEBUG] transformed A317Me.SPC -> A317ME.SPC
[sigmove 17:41:34 DEBUG] transformed A317Mf.SPC -> A317MF.SPC
[Status 17:41:34 INFO] data for A317 transferred to science data processing
[Tidy 17:41:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:41:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:41:34 INFO] resetting WatchDogTimer
[Status 17:41:35 INFO] Starting Set [AERI set: name S317, 6 scans, 0 angle, D16300 command]
[Ingest 17:41:35 INFO] Sending XML status message
[Status 17:41:35 INFO] Mirror angle: 0
[Mirror 17:41:35 INFO] rotating to position S
[Status 17:41:37 INFO] .SET file for ACQ96 ready
[Ingest 17:41:37 INFO] Starting acquisition
[Status 17:41:37 INFO] reading housekeeping
[Status 17:41:55 INFO] acquire complete
[Status 17:41:56 INFO] writing housekeeping
[Sequencer 17:41:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:41:56 INFO] incremented S scene to 317 completed views
[Sequencer 17:41:56 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:41:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:41:56 INFO] incremented to [AERI set: name T317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:41:56 INFO] S317.SIG(18)
[sigmove 17:41:56 DEBUG] transformed S317Ma.SPC -> S317MA.SPC
[sigmove 17:41:56 DEBUG] transformed S317Mb.SPC -> S317MB.SPC
[sigmove 17:41:56 DEBUG] transformed S317Mc.SPC -> S317MC.SPC
[sigmove 17:41:56 DEBUG] transformed S317Md.SPC -> S317MD.SPC
[sigmove 17:41:56 DEBUG] transformed S317Me.SPC -> S317ME.SPC
[sigmove 17:41:56 DEBUG] transformed S317Mf.SPC -> S317MF.SPC
[Status 17:41:56 INFO] data for S317 transferred to science data processing
[Tidy 17:41:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:41:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:41:56 INFO] resetting WatchDogTimer
[Status 17:41:56 INFO] Starting Set [AERI set: name T317, 6 scans, 0 angle, D16300 command]
[Ingest 17:41:56 INFO] Sending XML status message
[Status 17:41:56 INFO] Mirror angle: 0
[Mirror 17:41:57 INFO] rotating to position T
[Status 17:41:57 INFO] .SET file for ACQ96 ready
[Ingest 17:41:57 INFO] Starting acquisition
[Status 17:41:58 INFO] reading housekeeping
[Status 17:42:16 INFO] acquire complete
[Status 17:42:17 INFO] writing housekeeping
[Sequencer 17:42:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:42:17 INFO] incremented T scene to 317 completed views
[Sequencer 17:42:17 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:42:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:42:17 INFO] incremented to [AERI set: name U317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:42:17 INFO] T317.SIG(18)
[sigmove 17:42:17 DEBUG] transformed T317Ma.SPC -> T317MA.SPC
[sigmove 17:42:17 DEBUG] transformed T317Mb.SPC -> T317MB.SPC
[sigmove 17:42:17 DEBUG] transformed T317Mc.SPC -> T317MC.SPC
[sigmove 17:42:17 DEBUG] transformed T317Md.SPC -> T317MD.SPC
[sigmove 17:42:17 DEBUG] transformed T317Me.SPC -> T317ME.SPC
[sigmove 17:42:17 DEBUG] transformed T317Mf.SPC -> T317MF.SPC
[Status 17:42:17 INFO] data for T317 transferred to science data processing
[Tidy 17:42:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:42:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:42:17 INFO] resetting WatchDogTimer
[Status 17:42:17 INFO] Starting Set [AERI set: name U317, 6 scans, 0 angle, D16300 command]
[Ingest 17:42:17 INFO] Sending XML status message
[Status 17:42:17 INFO] Mirror angle: 0
[Mirror 17:42:18 INFO] rotating to position U
[Status 17:42:18 INFO] .SET file for ACQ96 ready
[Ingest 17:42:19 INFO] Starting acquisition
[Status 17:42:19 INFO] reading housekeeping
[Status 17:42:37 INFO] acquire complete
[Status 17:42:38 INFO] writing housekeeping
[Sequencer 17:42:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:42:38 INFO] incremented U scene to 317 completed views
[Sequencer 17:42:38 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:42:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:42:38 INFO] incremented to [AERI set: name V317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:42:38 INFO] U317.SIG(18)
[sigmove 17:42:38 DEBUG] transformed U317Ma.SPC -> U317MA.SPC
[sigmove 17:42:38 DEBUG] transformed U317Mb.SPC -> U317MB.SPC
[sigmove 17:42:38 DEBUG] transformed U317Mc.SPC -> U317MC.SPC
[sigmove 17:42:38 DEBUG] transformed U317Md.SPC -> U317MD.SPC
[sigmove 17:42:38 DEBUG] transformed U317Me.SPC -> U317ME.SPC
[sigmove 17:42:38 DEBUG] transformed U317Mf.SPC -> U317MF.SPC
[Status 17:42:38 INFO] data for U317 transferred to science data processing
[Tidy 17:42:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:42:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:42:38 INFO] resetting WatchDogTimer
[Status 17:42:39 INFO] Starting Set [AERI set: name V317, 6 scans, 0 angle, D16300 command]
[Ingest 17:42:39 INFO] Sending XML status message
[Status 17:42:39 INFO] Mirror angle: 0
[Mirror 17:42:39 INFO] rotating to position V
[Status 17:42:40 INFO] .SET file for ACQ96 ready
[Ingest 17:42:40 INFO] Starting acquisition
[Status 17:42:40 INFO] reading housekeeping
[Status 17:42:59 INFO] acquire complete
[Status 17:43:00 INFO] writing housekeeping
[Sequencer 17:43:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:43:00 INFO] incremented V scene to 317 completed views
[Sequencer 17:43:00 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:43:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:43:00 INFO] incremented to [AERI set: name W317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:43:00 INFO] V317.SIG(18)
[sigmove 17:43:00 DEBUG] transformed V317Ma.SPC -> V317MA.SPC
[sigmove 17:43:00 DEBUG] transformed V317Mb.SPC -> V317MB.SPC
[sigmove 17:43:00 DEBUG] transformed V317Mc.SPC -> V317MC.SPC
[sigmove 17:43:00 DEBUG] transformed V317Md.SPC -> V317MD.SPC
[sigmove 17:43:00 DEBUG] transformed V317Me.SPC -> V317ME.SPC
[sigmove 17:43:00 DEBUG] transformed V317Mf.SPC -> V317MF.SPC
[Status 17:43:00 INFO] data for V317 transferred to science data processing
[Tidy 17:43:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:43:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:43:00 INFO] resetting WatchDogTimer
[Status 17:43:00 INFO] Starting Set [AERI set: name W317, 6 scans, 0 angle, D16300 command]
[Ingest 17:43:00 INFO] Sending XML status message
[Status 17:43:00 INFO] Mirror angle: 0
[Mirror 17:43:00 INFO] rotating to position W
[Status 17:43:01 INFO] .SET file for ACQ96 ready
[Ingest 17:43:01 INFO] Starting acquisition
[Status 17:43:02 INFO] reading housekeeping
[Status 17:43:20 INFO] acquire complete
[Status 17:43:21 INFO] writing housekeeping
[Sequencer 17:43:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:43:21 INFO] incremented W scene to 317 completed views
[Sequencer 17:43:21 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:43:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:43:21 INFO] incremented to [AERI set: name X317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:43:21 INFO] W317.SIG(18)
[sigmove 17:43:21 DEBUG] transformed W317Ma.SPC -> W317MA.SPC
[sigmove 17:43:21 DEBUG] transformed W317Mb.SPC -> W317MB.SPC
[sigmove 17:43:21 DEBUG] transformed W317Mc.SPC -> W317MC.SPC
[sigmove 17:43:21 DEBUG] transformed W317Md.SPC -> W317MD.SPC
[sigmove 17:43:21 DEBUG] transformed W317Me.SPC -> W317ME.SPC
[sigmove 17:43:21 DEBUG] transformed W317Mf.SPC -> W317MF.SPC
[Status 17:43:21 INFO] data for W317 transferred to science data processing
[Tidy 17:43:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:43:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:43:21 INFO] resetting WatchDogTimer
[Status 17:43:21 INFO] Starting Set [AERI set: name X317, 6 scans, 0 angle, D16300 command]
[Ingest 17:43:21 INFO] Sending XML status message
[Status 17:43:21 INFO] Mirror angle: 0
[Mirror 17:43:22 INFO] rotating to position X
[Status 17:43:22 INFO] .SET file for ACQ96 ready
[Ingest 17:43:23 INFO] Starting acquisition
[Status 17:43:23 INFO] reading housekeeping
[Status 17:43:41 INFO] acquire complete
[Status 17:43:42 INFO] writing housekeeping
[Sequencer 17:43:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:43:42 INFO] incremented X scene to 317 completed views
[Sequencer 17:43:42 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:43:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:43:42 INFO] incremented to [AERI set: name Y317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:43:42 INFO] X317.SIG(18)
[sigmove 17:43:42 DEBUG] transformed X317Ma.SPC -> X317MA.SPC
[sigmove 17:43:42 DEBUG] transformed X317Mb.SPC -> X317MB.SPC
[sigmove 17:43:42 DEBUG] transformed X317Mc.SPC -> X317MC.SPC
[sigmove 17:43:42 DEBUG] transformed X317Md.SPC -> X317MD.SPC
[sigmove 17:43:42 DEBUG] transformed X317Me.SPC -> X317ME.SPC
[sigmove 17:43:42 DEBUG] transformed X317Mf.SPC -> X317MF.SPC
[Status 17:43:42 INFO] data for X317 transferred to science data processing
[Tidy 17:43:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:43:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:43:42 INFO] resetting WatchDogTimer
[Status 17:43:43 INFO] Starting Set [AERI set: name Y317, 6 scans, 0 angle, D16300 command]
[Ingest 17:43:43 INFO] Sending XML status message
[Status 17:43:43 INFO] Mirror angle: 0
[Mirror 17:43:43 INFO] rotating to position Y
[Status 17:43:44 INFO] .SET file for ACQ96 ready
[Ingest 17:43:44 INFO] Starting acquisition
[Status 17:43:44 INFO] reading housekeeping
[Status 17:44:02 INFO] acquire complete
[Status 17:44:04 INFO] writing housekeeping
[Sequencer 17:44:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:44:04 INFO] incremented Y scene to 317 completed views
[Sequencer 17:44:04 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:44:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:44:04 INFO] incremented to [AERI set: name Z317, 6 scans, 0 angle, D16300 command] set
[sigmove 17:44:04 INFO] Y317.SIG(18)
[sigmove 17:44:04 DEBUG] transformed Y317Ma.SPC -> Y317MA.SPC
[sigmove 17:44:04 DEBUG] transformed Y317Mb.SPC -> Y317MB.SPC
[sigmove 17:44:04 DEBUG] transformed Y317Mc.SPC -> Y317MC.SPC
[sigmove 17:44:04 DEBUG] transformed Y317Md.SPC -> Y317MD.SPC
[sigmove 17:44:04 DEBUG] transformed Y317Me.SPC -> Y317ME.SPC
[sigmove 17:44:04 DEBUG] transformed Y317Mf.SPC -> Y317MF.SPC
[Status 17:44:04 INFO] data for Y317 transferred to science data processing
[Tidy 17:44:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:44:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:44:04 INFO] resetting WatchDogTimer
[Status 17:44:04 INFO] Starting Set [AERI set: name Z317, 6 scans, 0 angle, D16300 command]
[Ingest 17:44:04 INFO] Sending XML status message
[Status 17:44:04 INFO] Mirror angle: 0
[Mirror 17:44:04 INFO] rotating to position Z
[Status 17:44:05 INFO] .SET file for ACQ96 ready
[Ingest 17:44:05 INFO] Starting acquisition
[Status 17:44:06 INFO] reading housekeeping
[Status 17:44:24 INFO] acquire complete
[Status 17:44:25 INFO] writing housekeeping
[Sequencer 17:44:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:44:25 INFO] incremented Z scene to 317 completed views
[Sequencer 17:44:25 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:44:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:44:25 INFO] incremented to [AERI set: name A318, 6 scans, 120 angle, D28300 command] set
[sigmove 17:44:25 INFO] Z317.SIG(18)
[sigmove 17:44:25 DEBUG] transformed Z317Ma.SPC -> Z317MA.SPC
[sigmove 17:44:25 DEBUG] transformed Z317Mb.SPC -> Z317MB.SPC
[sigmove 17:44:25 DEBUG] transformed Z317Mc.SPC -> Z317MC.SPC
[sigmove 17:44:25 DEBUG] transformed Z317Md.SPC -> Z317MD.SPC
[sigmove 17:44:25 DEBUG] transformed Z317Me.SPC -> Z317ME.SPC
[sigmove 17:44:25 DEBUG] transformed Z317Mf.SPC -> Z317MF.SPC
[Status 17:44:25 INFO] data for Z317 transferred to science data processing
[Tidy 17:44:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:44:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:44:25 INFO] resetting WatchDogTimer
[Status 17:44:25 INFO] Starting Set [AERI set: name A318, 6 scans, 120 angle, D28300 command]
[Ingest 17:44:25 INFO] Sending XML status message
[Status 17:44:25 INFO] Mirror angle: 120
[Mirror 17:44:26 INFO] rotating to position A
[Status 17:44:27 INFO] .SET file for ACQ96 ready
[Ingest 17:44:28 INFO] Starting acquisition
[Status 17:44:28 INFO] reading housekeeping
[Status 17:44:45 INFO] acquire complete
[Status 17:44:46 INFO] writing housekeeping
[Sequencer 17:44:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:44:46 INFO] incremented A scene to 318 completed views
[Sequencer 17:44:46 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:44:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:44:46 INFO] incremented to [AERI set: name H318, 6 scans, 60 angle, D22500 command] set
[sigmove 17:44:46 INFO] A318.SIG(18)
[sigmove 17:44:46 DEBUG] transformed A318Ma.SPC -> A318MA.SPC
[sigmove 17:44:46 DEBUG] transformed A318Mb.SPC -> A318MB.SPC
[sigmove 17:44:46 DEBUG] transformed A318Mc.SPC -> A318MC.SPC
[sigmove 17:44:46 DEBUG] transformed A318Md.SPC -> A318MD.SPC
[sigmove 17:44:46 DEBUG] transformed A318Me.SPC -> A318ME.SPC
[sigmove 17:44:46 DEBUG] transformed A318Mf.SPC -> A318MF.SPC
[Status 17:44:46 INFO] data for A318 transferred to science data processing
[Tidy 17:44:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:44:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:44:46 INFO] resetting WatchDogTimer
[Status 17:44:47 INFO] Starting Set [AERI set: name H318, 6 scans, 60 angle, D22500 command]
[Ingest 17:44:47 INFO] Sending XML status message
[Status 17:44:47 INFO] Mirror angle: 60
[Mirror 17:44:47 INFO] rotating to position H
[Status 17:44:48 INFO] .SET file for ACQ96 ready
[Ingest 17:44:48 INFO] Starting acquisition
[Status 17:44:49 INFO] reading housekeeping
[Status 17:45:06 INFO] acquire complete
[Status 17:45:07 INFO] writing housekeeping
[Sequencer 17:45:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:45:07 INFO] incremented H scene to 318 completed views
[Sequencer 17:45:07 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:45:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:45:07 INFO] incremented to [AERI set: name S318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:45:07 INFO] H318.SIG(18)
[sigmove 17:45:07 DEBUG] transformed H318Ma.SPC -> H318MA.SPC
[sigmove 17:45:07 DEBUG] transformed H318Mb.SPC -> H318MB.SPC
[sigmove 17:45:07 DEBUG] transformed H318Mc.SPC -> H318MC.SPC
[sigmove 17:45:07 DEBUG] transformed H318Md.SPC -> H318MD.SPC
[sigmove 17:45:07 DEBUG] transformed H318Me.SPC -> H318ME.SPC
[sigmove 17:45:07 DEBUG] transformed H318Mf.SPC -> H318MF.SPC
[Status 17:45:07 INFO] data for H318 transferred to science data processing
[Tidy 17:45:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:45:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:45:07 INFO] resetting WatchDogTimer
[Status 17:45:08 INFO] Starting Set [AERI set: name S318, 6 scans, 0 angle, D16300 command]
[Ingest 17:45:08 INFO] Sending XML status message
[Status 17:45:08 INFO] Mirror angle: 0
[Mirror 17:45:08 INFO] rotating to position S
[Status 17:45:09 INFO] .SET file for ACQ96 ready
[Ingest 17:45:10 INFO] Starting acquisition
[Status 17:45:10 INFO] reading housekeeping
[Status 17:45:28 INFO] acquire complete
[Status 17:45:29 INFO] writing housekeeping
[Sequencer 17:45:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:45:29 INFO] incremented S scene to 318 completed views
[Sequencer 17:45:29 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:45:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:45:29 INFO] incremented to [AERI set: name T318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:45:29 INFO] S318.SIG(18)
[sigmove 17:45:29 DEBUG] transformed S318Ma.SPC -> S318MA.SPC
[sigmove 17:45:29 DEBUG] transformed S318Mb.SPC -> S318MB.SPC
[sigmove 17:45:29 DEBUG] transformed S318Mc.SPC -> S318MC.SPC
[sigmove 17:45:29 DEBUG] transformed S318Md.SPC -> S318MD.SPC
[sigmove 17:45:29 DEBUG] transformed S318Me.SPC -> S318ME.SPC
[sigmove 17:45:29 DEBUG] transformed S318Mf.SPC -> S318MF.SPC
[Status 17:45:29 INFO] data for S318 transferred to science data processing
[Tidy 17:45:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:45:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:45:29 INFO] resetting WatchDogTimer
[Status 17:45:29 INFO] Starting Set [AERI set: name T318, 6 scans, 0 angle, D16300 command]
[Ingest 17:45:29 INFO] Sending XML status message
[Status 17:45:29 INFO] Mirror angle: 0
[Mirror 17:45:30 INFO] rotating to position T
[Status 17:45:30 INFO] .SET file for ACQ96 ready
[Ingest 17:45:30 INFO] Starting acquisition
[Status 17:45:31 INFO] reading housekeeping
[Status 17:45:49 INFO] acquire complete
[Status 17:45:50 INFO] writing housekeeping
[Sequencer 17:45:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:45:50 INFO] incremented T scene to 318 completed views
[Sequencer 17:45:50 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:45:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:45:50 INFO] incremented to [AERI set: name U318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:45:50 INFO] T318.SIG(18)
[sigmove 17:45:50 DEBUG] transformed T318Ma.SPC -> T318MA.SPC
[sigmove 17:45:50 DEBUG] transformed T318Mb.SPC -> T318MB.SPC
[sigmove 17:45:50 DEBUG] transformed T318Mc.SPC -> T318MC.SPC
[sigmove 17:45:50 DEBUG] transformed T318Md.SPC -> T318MD.SPC
[sigmove 17:45:50 DEBUG] transformed T318Me.SPC -> T318ME.SPC
[sigmove 17:45:50 DEBUG] transformed T318Mf.SPC -> T318MF.SPC
[Status 17:45:50 INFO] data for T318 transferred to science data processing
[Tidy 17:45:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:45:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:45:50 INFO] resetting WatchDogTimer
[Status 17:45:51 INFO] Starting Set [AERI set: name U318, 6 scans, 0 angle, D16300 command]
[Ingest 17:45:51 INFO] Sending XML status message
[Status 17:45:51 INFO] Mirror angle: 0
[Mirror 17:45:51 INFO] rotating to position U
[Status 17:45:52 INFO] .SET file for ACQ96 ready
[Ingest 17:45:52 INFO] Starting acquisition
[Status 17:45:52 INFO] reading housekeeping
[Status 17:46:10 INFO] acquire complete
[Status 17:46:11 INFO] writing housekeeping
[Sequencer 17:46:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:46:11 INFO] incremented U scene to 318 completed views
[Sequencer 17:46:11 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:46:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:46:11 INFO] incremented to [AERI set: name V318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:46:11 INFO] U318.SIG(18)
[sigmove 17:46:11 DEBUG] transformed U318Ma.SPC -> U318MA.SPC
[sigmove 17:46:11 DEBUG] transformed U318Mb.SPC -> U318MB.SPC
[sigmove 17:46:11 DEBUG] transformed U318Mc.SPC -> U318MC.SPC
[sigmove 17:46:11 DEBUG] transformed U318Md.SPC -> U318MD.SPC
[sigmove 17:46:11 DEBUG] transformed U318Me.SPC -> U318ME.SPC
[sigmove 17:46:11 DEBUG] transformed U318Mf.SPC -> U318MF.SPC
[Status 17:46:11 INFO] data for U318 transferred to science data processing
[Tidy 17:46:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:46:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:46:11 INFO] resetting WatchDogTimer
[Status 17:46:12 INFO] Starting Set [AERI set: name V318, 6 scans, 0 angle, D16300 command]
[Ingest 17:46:12 INFO] Sending XML status message
[Status 17:46:12 INFO] Mirror angle: 0
[Mirror 17:46:12 INFO] rotating to position V
[Status 17:46:13 INFO] .SET file for ACQ96 ready
[Ingest 17:46:13 INFO] Starting acquisition
[Status 17:46:14 INFO] reading housekeeping
[Status 17:46:32 INFO] acquire complete
[Status 17:46:33 INFO] writing housekeeping
[Sequencer 17:46:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:46:33 INFO] incremented V scene to 318 completed views
[Sequencer 17:46:33 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:46:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:46:33 INFO] incremented to [AERI set: name W318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:46:33 INFO] V318.SIG(18)
[sigmove 17:46:33 DEBUG] transformed V318Ma.SPC -> V318MA.SPC
[sigmove 17:46:33 DEBUG] transformed V318Mb.SPC -> V318MB.SPC
[sigmove 17:46:33 DEBUG] transformed V318Mc.SPC -> V318MC.SPC
[sigmove 17:46:33 DEBUG] transformed V318Md.SPC -> V318MD.SPC
[sigmove 17:46:33 DEBUG] transformed V318Me.SPC -> V318ME.SPC
[sigmove 17:46:33 DEBUG] transformed V318Mf.SPC -> V318MF.SPC
[Status 17:46:33 INFO] data for V318 transferred to science data processing
[Tidy 17:46:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:46:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:46:33 INFO] resetting WatchDogTimer
[Status 17:46:33 INFO] Starting Set [AERI set: name W318, 6 scans, 0 angle, D16300 command]
[Ingest 17:46:33 INFO] Sending XML status message
[Status 17:46:33 INFO] Mirror angle: 0
[Mirror 17:46:34 INFO] rotating to position W
[Status 17:46:34 INFO] .SET file for ACQ96 ready
[Ingest 17:46:34 INFO] Starting acquisition
[Status 17:46:35 INFO] reading housekeeping
[Status 17:46:53 INFO] acquire complete
[Status 17:46:54 INFO] writing housekeeping
[Sequencer 17:46:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:46:54 INFO] incremented W scene to 318 completed views
[Sequencer 17:46:54 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:46:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:46:54 INFO] incremented to [AERI set: name X318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:46:54 INFO] W318.SIG(18)
[sigmove 17:46:54 DEBUG] transformed W318Ma.SPC -> W318MA.SPC
[sigmove 17:46:54 DEBUG] transformed W318Mb.SPC -> W318MB.SPC
[sigmove 17:46:54 DEBUG] transformed W318Mc.SPC -> W318MC.SPC
[sigmove 17:46:54 DEBUG] transformed W318Md.SPC -> W318MD.SPC
[sigmove 17:46:54 DEBUG] transformed W318Me.SPC -> W318ME.SPC
[sigmove 17:46:54 DEBUG] transformed W318Mf.SPC -> W318MF.SPC
[Status 17:46:54 INFO] data for W318 transferred to science data processing
[Tidy 17:46:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:46:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:46:54 INFO] resetting WatchDogTimer
[Status 17:46:54 INFO] Starting Set [AERI set: name X318, 6 scans, 0 angle, D16300 command]
[Ingest 17:46:54 INFO] Sending XML status message
[Status 17:46:54 INFO] Mirror angle: 0
[Mirror 17:46:55 INFO] rotating to position X
[Status 17:46:55 INFO] .SET file for ACQ96 ready
[Ingest 17:46:56 INFO] Starting acquisition
[Status 17:46:56 INFO] reading housekeeping
[Status 17:47:14 INFO] acquire complete
[Status 17:47:15 INFO] writing housekeeping
[Sequencer 17:47:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:47:15 INFO] incremented X scene to 318 completed views
[Sequencer 17:47:15 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:47:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:47:15 INFO] incremented to [AERI set: name Y318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:47:15 INFO] X318.SIG(18)
[sigmove 17:47:15 DEBUG] transformed X318Ma.SPC -> X318MA.SPC
[sigmove 17:47:15 DEBUG] transformed X318Mb.SPC -> X318MB.SPC
[sigmove 17:47:15 DEBUG] transformed X318Mc.SPC -> X318MC.SPC
[sigmove 17:47:15 DEBUG] transformed X318Md.SPC -> X318MD.SPC
[sigmove 17:47:15 DEBUG] transformed X318Me.SPC -> X318ME.SPC
[sigmove 17:47:15 DEBUG] transformed X318Mf.SPC -> X318MF.SPC
[Status 17:47:15 INFO] data for X318 transferred to science data processing
[Tidy 17:47:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:47:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:47:15 INFO] resetting WatchDogTimer
[Status 17:47:16 INFO] Starting Set [AERI set: name Y318, 6 scans, 0 angle, D16300 command]
[Ingest 17:47:16 INFO] Sending XML status message
[Status 17:47:16 INFO] Mirror angle: 0
[Mirror 17:47:16 INFO] rotating to position Y
[Status 17:47:17 INFO] .SET file for ACQ96 ready
[Ingest 17:47:17 INFO] Starting acquisition
[Status 17:47:17 INFO] reading housekeeping
[Status 17:47:36 INFO] acquire complete
[Status 17:47:37 INFO] writing housekeeping
[Sequencer 17:47:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:47:37 INFO] incremented Y scene to 318 completed views
[Sequencer 17:47:37 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:47:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:47:37 INFO] incremented to [AERI set: name Z318, 6 scans, 0 angle, D16300 command] set
[sigmove 17:47:37 INFO] Y318.SIG(18)
[sigmove 17:47:37 DEBUG] transformed Y318Ma.SPC -> Y318MA.SPC
[sigmove 17:47:37 DEBUG] transformed Y318Mb.SPC -> Y318MB.SPC
[sigmove 17:47:37 DEBUG] transformed Y318Mc.SPC -> Y318MC.SPC
[sigmove 17:47:37 DEBUG] transformed Y318Md.SPC -> Y318MD.SPC
[sigmove 17:47:37 DEBUG] transformed Y318Me.SPC -> Y318ME.SPC
[sigmove 17:47:37 DEBUG] transformed Y318Mf.SPC -> Y318MF.SPC
[Status 17:47:37 INFO] data for Y318 transferred to science data processing
[Tidy 17:47:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:47:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:47:37 INFO] resetting WatchDogTimer
[Status 17:47:37 INFO] Starting Set [AERI set: name Z318, 6 scans, 0 angle, D16300 command]
[Ingest 17:47:37 INFO] Sending XML status message
[Status 17:47:37 INFO] Mirror angle: 0
[Mirror 17:47:37 INFO] rotating to position Z
[Status 17:47:38 INFO] .SET file for ACQ96 ready
[Ingest 17:47:38 INFO] Starting acquisition
[Status 17:47:39 INFO] reading housekeeping
[Status 17:47:57 INFO] acquire complete
[Status 17:47:58 INFO] writing housekeeping
[Sequencer 17:47:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:47:58 INFO] incremented Z scene to 318 completed views
[Sequencer 17:47:58 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:47:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:47:58 INFO] incremented to [AERI set: name H319, 6 scans, 60 angle, D22500 command] set
[sigmove 17:47:58 INFO] Z318.SIG(18)
[sigmove 17:47:58 DEBUG] transformed Z318Ma.SPC -> Z318MA.SPC
[sigmove 17:47:58 DEBUG] transformed Z318Mb.SPC -> Z318MB.SPC
[sigmove 17:47:58 DEBUG] transformed Z318Mc.SPC -> Z318MC.SPC
[sigmove 17:47:58 DEBUG] transformed Z318Md.SPC -> Z318MD.SPC
[sigmove 17:47:58 DEBUG] transformed Z318Me.SPC -> Z318ME.SPC
[sigmove 17:47:58 DEBUG] transformed Z318Mf.SPC -> Z318MF.SPC
[Status 17:47:58 INFO] data for Z318 transferred to science data processing
[Tidy 17:47:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:47:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:47:58 INFO] resetting WatchDogTimer
[Status 17:47:58 INFO] Starting Set [AERI set: name H319, 6 scans, 60 angle, D22500 command]
[Ingest 17:47:58 INFO] Sending XML status message
[Status 17:47:58 INFO] Mirror angle: 60
[Mirror 17:47:59 INFO] rotating to position H
[Status 17:48:00 INFO] .SET file for ACQ96 ready
[Ingest 17:48:00 INFO] Starting acquisition
[Status 17:48:01 INFO] reading housekeeping
[Status 17:48:18 INFO] acquire complete
[Status 17:48:19 INFO] writing housekeeping
[Sequencer 17:48:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:48:19 INFO] incremented H scene to 319 completed views
[Sequencer 17:48:19 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:48:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:48:19 INFO] incremented to [AERI set: name A319, 6 scans, 120 angle, D28300 command] set
[sigmove 17:48:19 INFO] H319.SIG(18)
[sigmove 17:48:19 DEBUG] transformed H319Ma.SPC -> H319MA.SPC
[sigmove 17:48:19 DEBUG] transformed H319Mb.SPC -> H319MB.SPC
[sigmove 17:48:19 DEBUG] transformed H319Mc.SPC -> H319MC.SPC
[sigmove 17:48:19 DEBUG] transformed H319Md.SPC -> H319MD.SPC
[sigmove 17:48:19 DEBUG] transformed H319Me.SPC -> H319ME.SPC
[sigmove 17:48:19 DEBUG] transformed H319Mf.SPC -> H319MF.SPC
[Status 17:48:19 INFO] data for H319 transferred to science data processing
[Tidy 17:48:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:48:19 INFO] A317.FIN(19),H317.FIN(19),S317.FIN(19),T317.FIN(19),U317.FIN(19),V317.FIN(19),W317.FIN(19),X317.FIN(19),Y317.FIN(19),Z317.FIN(19),A318.FIN(19),H318.FIN(19),S318.FIN(19),T318.FIN(19),U318.FIN(19),V318.FIN(19),W318.FIN(19),X318.FIN(19),Y318.FIN(19),Z318.FIN(19)
[sigmove 17:48:19 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:48:19 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:48:25 DEBUG] done zipping
[WatchDog 17:48:25 INFO] resetting WatchDogTimer
[Status 17:48:26 INFO] Starting Set [AERI set: name A319, 6 scans, 120 angle, D28300 command]
[Ingest 17:48:26 INFO] Sending XML status message
[Status 17:48:26 INFO] Mirror angle: 120
[Mirror 17:48:26 INFO] rotating to position A
[Status 17:48:27 INFO] .SET file for ACQ96 ready
[Ingest 17:48:27 INFO] Starting acquisition
[Status 17:48:28 INFO] reading housekeeping
[Status 17:48:45 INFO] acquire complete
[Status 17:48:46 INFO] writing housekeeping
[Sequencer 17:48:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:48:46 INFO] incremented A scene to 319 completed views
[Sequencer 17:48:46 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:48:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:48:46 INFO] incremented to [AERI set: name S319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:48:46 INFO] A319.SIG(18)
[sigmove 17:48:46 DEBUG] transformed A319Ma.SPC -> A319MA.SPC
[sigmove 17:48:46 DEBUG] transformed A319Mb.SPC -> A319MB.SPC
[sigmove 17:48:46 DEBUG] transformed A319Mc.SPC -> A319MC.SPC
[sigmove 17:48:46 DEBUG] transformed A319Md.SPC -> A319MD.SPC
[sigmove 17:48:46 DEBUG] transformed A319Me.SPC -> A319ME.SPC
[sigmove 17:48:46 DEBUG] transformed A319Mf.SPC -> A319MF.SPC
[Status 17:48:46 INFO] data for A319 transferred to science data processing
[Tidy 17:48:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:48:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:48:46 INFO] resetting WatchDogTimer
[Status 17:48:47 INFO] Starting Set [AERI set: name S319, 6 scans, 0 angle, D16300 command]
[Ingest 17:48:47 INFO] Sending XML status message
[Status 17:48:47 INFO] Mirror angle: 0
[Mirror 17:48:47 INFO] rotating to position S
[Status 17:48:49 INFO] .SET file for ACQ96 ready
[Ingest 17:48:49 INFO] Starting acquisition
[Status 17:48:49 INFO] reading housekeeping
[Status 17:49:06 INFO] acquire complete
[Status 17:49:08 INFO] writing housekeeping
[Sequencer 17:49:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:49:08 INFO] incremented S scene to 319 completed views
[Sequencer 17:49:08 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:49:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:49:08 INFO] incremented to [AERI set: name T319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:49:08 INFO] S319.SIG(18)
[sigmove 17:49:08 DEBUG] transformed S319Ma.SPC -> S319MA.SPC
[sigmove 17:49:08 DEBUG] transformed S319Mb.SPC -> S319MB.SPC
[sigmove 17:49:08 DEBUG] transformed S319Mc.SPC -> S319MC.SPC
[sigmove 17:49:08 DEBUG] transformed S319Md.SPC -> S319MD.SPC
[sigmove 17:49:08 DEBUG] transformed S319Me.SPC -> S319ME.SPC
[sigmove 17:49:08 DEBUG] transformed S319Mf.SPC -> S319MF.SPC
[Status 17:49:08 INFO] data for S319 transferred to science data processing
[Tidy 17:49:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:49:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:49:08 INFO] resetting WatchDogTimer
[Status 17:49:08 INFO] Starting Set [AERI set: name T319, 6 scans, 0 angle, D16300 command]
[Ingest 17:49:08 INFO] Sending XML status message
[Status 17:49:08 INFO] Mirror angle: 0
[Mirror 17:49:08 INFO] rotating to position T
[Status 17:49:09 INFO] .SET file for ACQ96 ready
[Ingest 17:49:09 INFO] Starting acquisition
[Status 17:49:10 INFO] reading housekeeping
[Status 17:49:28 INFO] acquire complete
[Status 17:49:29 INFO] writing housekeeping
[Sequencer 17:49:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:49:29 INFO] incremented T scene to 319 completed views
[Sequencer 17:49:29 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:49:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:49:29 INFO] incremented to [AERI set: name U319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:49:29 INFO] T319.SIG(18)
[sigmove 17:49:29 DEBUG] transformed T319Ma.SPC -> T319MA.SPC
[sigmove 17:49:29 DEBUG] transformed T319Mb.SPC -> T319MB.SPC
[sigmove 17:49:29 DEBUG] transformed T319Mc.SPC -> T319MC.SPC
[sigmove 17:49:29 DEBUG] transformed T319Md.SPC -> T319MD.SPC
[sigmove 17:49:29 DEBUG] transformed T319Me.SPC -> T319ME.SPC
[sigmove 17:49:29 DEBUG] transformed T319Mf.SPC -> T319MF.SPC
[Status 17:49:29 INFO] data for T319 transferred to science data processing
[Tidy 17:49:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:49:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:49:29 INFO] resetting WatchDogTimer
[Status 17:49:29 INFO] Starting Set [AERI set: name U319, 6 scans, 0 angle, D16300 command]
[Ingest 17:49:29 INFO] Sending XML status message
[Status 17:49:29 INFO] Mirror angle: 0
[Mirror 17:49:30 INFO] rotating to position U
[Status 17:49:30 INFO] .SET file for ACQ96 ready
[Ingest 17:49:31 INFO] Starting acquisition
[Status 17:49:31 INFO] reading housekeeping
[Status 17:49:49 INFO] acquire complete
[Status 17:49:50 INFO] writing housekeeping
[Sequencer 17:49:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:49:50 INFO] incremented U scene to 319 completed views
[Sequencer 17:49:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:49:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:49:50 INFO] incremented to [AERI set: name V319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:49:50 INFO] U319.SIG(18)
[sigmove 17:49:50 DEBUG] transformed U319Ma.SPC -> U319MA.SPC
[sigmove 17:49:50 DEBUG] transformed U319Mb.SPC -> U319MB.SPC
[sigmove 17:49:50 DEBUG] transformed U319Mc.SPC -> U319MC.SPC
[sigmove 17:49:50 DEBUG] transformed U319Md.SPC -> U319MD.SPC
[sigmove 17:49:50 DEBUG] transformed U319Me.SPC -> U319ME.SPC
[sigmove 17:49:50 DEBUG] transformed U319Mf.SPC -> U319MF.SPC
[Status 17:49:50 INFO] data for U319 transferred to science data processing
[Tidy 17:49:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:49:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:49:50 INFO] resetting WatchDogTimer
[Status 17:49:51 INFO] Starting Set [AERI set: name V319, 6 scans, 0 angle, D16300 command]
[Ingest 17:49:51 INFO] Sending XML status message
[Status 17:49:51 INFO] Mirror angle: 0
[Mirror 17:49:51 INFO] rotating to position V
[Status 17:49:51 INFO] .SET file for ACQ96 ready
[Ingest 17:49:52 INFO] Starting acquisition
[Status 17:49:52 INFO] reading housekeeping
[Status 17:50:10 INFO] acquire complete
[Status 17:50:11 INFO] writing housekeeping
[Sequencer 17:50:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:50:11 INFO] incremented V scene to 319 completed views
[Sequencer 17:50:11 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:50:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:50:11 INFO] incremented to [AERI set: name W319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:50:11 INFO] V319.SIG(18)
[sigmove 17:50:11 DEBUG] transformed V319Ma.SPC -> V319MA.SPC
[sigmove 17:50:11 DEBUG] transformed V319Mb.SPC -> V319MB.SPC
[sigmove 17:50:11 DEBUG] transformed V319Mc.SPC -> V319MC.SPC
[sigmove 17:50:11 DEBUG] transformed V319Md.SPC -> V319MD.SPC
[sigmove 17:50:11 DEBUG] transformed V319Me.SPC -> V319ME.SPC
[sigmove 17:50:11 DEBUG] transformed V319Mf.SPC -> V319MF.SPC
[Status 17:50:11 INFO] data for V319 transferred to science data processing
[Tidy 17:50:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:50:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:50:11 INFO] resetting WatchDogTimer
[Status 17:50:12 INFO] Starting Set [AERI set: name W319, 6 scans, 0 angle, D16300 command]
[Ingest 17:50:12 INFO] Sending XML status message
[Status 17:50:12 INFO] Mirror angle: 0
[Mirror 17:50:12 INFO] rotating to position W
[Status 17:50:13 INFO] .SET file for ACQ96 ready
[Ingest 17:50:13 INFO] Starting acquisition
[Status 17:50:14 INFO] reading housekeeping
[Status 17:50:32 INFO] acquire complete
[Status 17:50:33 INFO] writing housekeeping
[Sequencer 17:50:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:50:33 INFO] incremented W scene to 319 completed views
[Sequencer 17:50:33 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:50:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:50:33 INFO] incremented to [AERI set: name X319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:50:33 INFO] W319.SIG(18)
[sigmove 17:50:33 DEBUG] transformed W319Ma.SPC -> W319MA.SPC
[sigmove 17:50:33 DEBUG] transformed W319Mb.SPC -> W319MB.SPC
[sigmove 17:50:33 DEBUG] transformed W319Mc.SPC -> W319MC.SPC
[sigmove 17:50:33 DEBUG] transformed W319Md.SPC -> W319MD.SPC
[sigmove 17:50:33 DEBUG] transformed W319Me.SPC -> W319ME.SPC
[sigmove 17:50:33 DEBUG] transformed W319Mf.SPC -> W319MF.SPC
[Status 17:50:33 INFO] data for W319 transferred to science data processing
[Tidy 17:50:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:50:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:50:33 INFO] resetting WatchDogTimer
[Status 17:50:33 INFO] Starting Set [AERI set: name X319, 6 scans, 0 angle, D16300 command]
[Ingest 17:50:33 INFO] Sending XML status message
[Status 17:50:33 INFO] Mirror angle: 0
[Mirror 17:50:34 INFO] rotating to position X
[Status 17:50:34 INFO] .SET file for ACQ96 ready
[Ingest 17:50:34 INFO] Starting acquisition
[Status 17:50:35 INFO] reading housekeeping
[Status 17:50:53 INFO] acquire complete
[Status 17:50:54 INFO] writing housekeeping
[Sequencer 17:50:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:50:54 INFO] incremented X scene to 319 completed views
[Sequencer 17:50:54 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:50:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:50:54 INFO] incremented to [AERI set: name Y319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:50:54 INFO] X319.SIG(18)
[sigmove 17:50:54 DEBUG] transformed X319Ma.SPC -> X319MA.SPC
[sigmove 17:50:54 DEBUG] transformed X319Mb.SPC -> X319MB.SPC
[sigmove 17:50:54 DEBUG] transformed X319Mc.SPC -> X319MC.SPC
[sigmove 17:50:54 DEBUG] transformed X319Md.SPC -> X319MD.SPC
[sigmove 17:50:54 DEBUG] transformed X319Me.SPC -> X319ME.SPC
[sigmove 17:50:54 DEBUG] transformed X319Mf.SPC -> X319MF.SPC
[Status 17:50:54 INFO] data for X319 transferred to science data processing
[Tidy 17:50:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:50:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:50:54 INFO] resetting WatchDogTimer
[Status 17:50:54 INFO] Starting Set [AERI set: name Y319, 6 scans, 0 angle, D16300 command]
[Ingest 17:50:54 INFO] Sending XML status message
[Status 17:50:54 INFO] Mirror angle: 0
[Mirror 17:50:55 INFO] rotating to position Y
[Status 17:50:55 INFO] .SET file for ACQ96 ready
[Ingest 17:50:56 INFO] Starting acquisition
[Status 17:50:56 INFO] reading housekeeping
[Status 17:51:14 INFO] acquire complete
[Status 17:51:15 INFO] writing housekeeping
[Sequencer 17:51:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:51:15 INFO] incremented Y scene to 319 completed views
[Sequencer 17:51:15 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:51:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:51:15 INFO] incremented to [AERI set: name Z319, 6 scans, 0 angle, D16300 command] set
[sigmove 17:51:15 INFO] Y319.SIG(18)
[sigmove 17:51:15 DEBUG] transformed Y319Ma.SPC -> Y319MA.SPC
[sigmove 17:51:15 DEBUG] transformed Y319Mb.SPC -> Y319MB.SPC
[sigmove 17:51:15 DEBUG] transformed Y319Mc.SPC -> Y319MC.SPC
[sigmove 17:51:15 DEBUG] transformed Y319Md.SPC -> Y319MD.SPC
[sigmove 17:51:15 DEBUG] transformed Y319Me.SPC -> Y319ME.SPC
[sigmove 17:51:15 DEBUG] transformed Y319Mf.SPC -> Y319MF.SPC
[Status 17:51:15 INFO] data for Y319 transferred to science data processing
[Tidy 17:51:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:51:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:51:15 INFO] resetting WatchDogTimer
[Status 17:51:16 INFO] Starting Set [AERI set: name Z319, 6 scans, 0 angle, D16300 command]
[Ingest 17:51:16 INFO] Sending XML status message
[Status 17:51:16 INFO] Mirror angle: 0
[Mirror 17:51:16 INFO] rotating to position Z
[Status 17:51:17 INFO] .SET file for ACQ96 ready
[Ingest 17:51:17 INFO] Starting acquisition
[Status 17:51:17 INFO] reading housekeeping
[Status 17:51:36 INFO] acquire complete
[Status 17:51:37 INFO] writing housekeeping
[Sequencer 17:51:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:51:37 INFO] incremented Z scene to 319 completed views
[Sequencer 17:51:37 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:51:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:51:37 INFO] incremented to [AERI set: name A320, 6 scans, 120 angle, D28300 command] set
[sigmove 17:51:37 INFO] Z319.SIG(18)
[sigmove 17:51:37 DEBUG] transformed Z319Ma.SPC -> Z319MA.SPC
[sigmove 17:51:37 DEBUG] transformed Z319Mb.SPC -> Z319MB.SPC
[sigmove 17:51:37 DEBUG] transformed Z319Mc.SPC -> Z319MC.SPC
[sigmove 17:51:37 DEBUG] transformed Z319Md.SPC -> Z319MD.SPC
[sigmove 17:51:37 DEBUG] transformed Z319Me.SPC -> Z319ME.SPC
[sigmove 17:51:37 DEBUG] transformed Z319Mf.SPC -> Z319MF.SPC
[Status 17:51:37 INFO] data for Z319 transferred to science data processing
[Tidy 17:51:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:51:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:51:37 INFO] resetting WatchDogTimer
[Status 17:51:37 INFO] Starting Set [AERI set: name A320, 6 scans, 120 angle, D28300 command]
[Ingest 17:51:37 INFO] Sending XML status message
[Status 17:51:37 INFO] Mirror angle: 120
[Mirror 17:51:37 INFO] rotating to position A
[Status 17:51:39 INFO] .SET file for ACQ96 ready
[Ingest 17:51:39 INFO] Starting acquisition
[Status 17:51:40 INFO] reading housekeeping
[Status 17:51:57 INFO] acquire complete
[Status 17:51:58 INFO] writing housekeeping
[Sequencer 17:51:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:51:58 INFO] incremented A scene to 320 completed views
[Sequencer 17:51:58 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:51:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:51:58 INFO] incremented to [AERI set: name H320, 6 scans, 60 angle, D22500 command] set
[sigmove 17:51:58 INFO] A320.SIG(18)
[sigmove 17:51:58 DEBUG] transformed A320Ma.SPC -> A320MA.SPC
[sigmove 17:51:58 DEBUG] transformed A320Mb.SPC -> A320MB.SPC
[sigmove 17:51:58 DEBUG] transformed A320Mc.SPC -> A320MC.SPC
[sigmove 17:51:58 DEBUG] transformed A320Md.SPC -> A320MD.SPC
[sigmove 17:51:58 DEBUG] transformed A320Me.SPC -> A320ME.SPC
[sigmove 17:51:58 DEBUG] transformed A320Mf.SPC -> A320MF.SPC
[Status 17:51:58 INFO] data for A320 transferred to science data processing
[Tidy 17:51:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:51:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:51:58 INFO] resetting WatchDogTimer
[Status 17:51:58 INFO] Starting Set [AERI set: name H320, 6 scans, 60 angle, D22500 command]
[Ingest 17:51:58 INFO] Sending XML status message
[Status 17:51:58 INFO] Mirror angle: 60
[Mirror 17:51:59 INFO] rotating to position H
[Status 17:52:00 INFO] .SET file for ACQ96 ready
[Ingest 17:52:00 INFO] Starting acquisition
[Status 17:52:01 INFO] reading housekeeping
[Status 17:52:18 INFO] acquire complete
[Status 17:52:19 INFO] writing housekeeping
[Sequencer 17:52:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:52:19 INFO] incremented H scene to 320 completed views
[Sequencer 17:52:19 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:52:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:52:19 INFO] incremented to [AERI set: name S320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:52:19 INFO] H320.SIG(18)
[sigmove 17:52:19 DEBUG] transformed H320Ma.SPC -> H320MA.SPC
[sigmove 17:52:19 DEBUG] transformed H320Mb.SPC -> H320MB.SPC
[sigmove 17:52:19 DEBUG] transformed H320Mc.SPC -> H320MC.SPC
[sigmove 17:52:19 DEBUG] transformed H320Md.SPC -> H320MD.SPC
[sigmove 17:52:19 DEBUG] transformed H320Me.SPC -> H320ME.SPC
[sigmove 17:52:19 DEBUG] transformed H320Mf.SPC -> H320MF.SPC
[Status 17:52:19 INFO] data for H320 transferred to science data processing
[Tidy 17:52:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:52:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:52:19 INFO] resetting WatchDogTimer
[Status 17:52:20 INFO] Starting Set [AERI set: name S320, 6 scans, 0 angle, D16300 command]
[Ingest 17:52:20 INFO] Sending XML status message
[Status 17:52:20 INFO] Mirror angle: 0
[Mirror 17:52:20 INFO] rotating to position S
[Status 17:52:21 INFO] .SET file for ACQ96 ready
[Ingest 17:52:21 INFO] Starting acquisition
[Status 17:52:22 INFO] reading housekeeping
[Status 17:52:40 INFO] acquire complete
[Status 17:52:41 INFO] writing housekeeping
[Sequencer 17:52:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:52:41 INFO] incremented S scene to 320 completed views
[Sequencer 17:52:41 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:52:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:52:41 INFO] incremented to [AERI set: name T320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:52:41 INFO] S320.SIG(18)
[sigmove 17:52:41 DEBUG] transformed S320Ma.SPC -> S320MA.SPC
[sigmove 17:52:41 DEBUG] transformed S320Mb.SPC -> S320MB.SPC
[sigmove 17:52:41 DEBUG] transformed S320Mc.SPC -> S320MC.SPC
[sigmove 17:52:41 DEBUG] transformed S320Md.SPC -> S320MD.SPC
[sigmove 17:52:41 DEBUG] transformed S320Me.SPC -> S320ME.SPC
[sigmove 17:52:41 DEBUG] transformed S320Mf.SPC -> S320MF.SPC
[Status 17:52:41 INFO] data for S320 transferred to science data processing
[Tidy 17:52:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:52:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:52:41 INFO] resetting WatchDogTimer
[Status 17:52:41 INFO] Starting Set [AERI set: name T320, 6 scans, 0 angle, D16300 command]
[Ingest 17:52:41 INFO] Sending XML status message
[Status 17:52:41 INFO] Mirror angle: 0
[Mirror 17:52:41 INFO] rotating to position T
[Status 17:52:42 INFO] .SET file for ACQ96 ready
[Ingest 17:52:42 INFO] Starting acquisition
[Status 17:52:43 INFO] reading housekeeping
[Status 17:53:01 INFO] acquire complete
[Status 17:53:02 INFO] writing housekeeping
[Sequencer 17:53:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:53:02 INFO] incremented T scene to 320 completed views
[Sequencer 17:53:02 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:53:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:53:02 INFO] incremented to [AERI set: name U320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:53:02 INFO] T320.SIG(18)
[sigmove 17:53:02 DEBUG] transformed T320Ma.SPC -> T320MA.SPC
[sigmove 17:53:02 DEBUG] transformed T320Mb.SPC -> T320MB.SPC
[sigmove 17:53:02 DEBUG] transformed T320Mc.SPC -> T320MC.SPC
[sigmove 17:53:02 DEBUG] transformed T320Md.SPC -> T320MD.SPC
[sigmove 17:53:02 DEBUG] transformed T320Me.SPC -> T320ME.SPC
[sigmove 17:53:02 DEBUG] transformed T320Mf.SPC -> T320MF.SPC
[Status 17:53:02 INFO] data for T320 transferred to science data processing
[Tidy 17:53:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:53:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:53:02 INFO] resetting WatchDogTimer
[Status 17:53:02 INFO] Starting Set [AERI set: name U320, 6 scans, 0 angle, D16300 command]
[Ingest 17:53:02 INFO] Sending XML status message
[Status 17:53:02 INFO] Mirror angle: 0
[Mirror 17:53:03 INFO] rotating to position U
[Status 17:53:03 INFO] .SET file for ACQ96 ready
[Ingest 17:53:04 INFO] Starting acquisition
[Status 17:53:04 INFO] reading housekeeping
[Status 17:53:22 INFO] acquire complete
[Status 17:53:24 INFO] writing housekeeping
[Sequencer 17:53:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:53:24 INFO] incremented U scene to 320 completed views
[Sequencer 17:53:24 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:53:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:53:24 INFO] incremented to [AERI set: name V320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:53:24 INFO] U320.SIG(18)
[sigmove 17:53:24 DEBUG] transformed U320Ma.SPC -> U320MA.SPC
[sigmove 17:53:24 DEBUG] transformed U320Mb.SPC -> U320MB.SPC
[sigmove 17:53:24 DEBUG] transformed U320Mc.SPC -> U320MC.SPC
[sigmove 17:53:24 DEBUG] transformed U320Md.SPC -> U320MD.SPC
[sigmove 17:53:24 DEBUG] transformed U320Me.SPC -> U320ME.SPC
[sigmove 17:53:25 DEBUG] transformed U320Mf.SPC -> U320MF.SPC
[Status 17:53:25 INFO] data for U320 transferred to science data processing
[Tidy 17:53:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:53:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:53:25 INFO] resetting WatchDogTimer
[Status 17:53:25 INFO] Starting Set [AERI set: name V320, 6 scans, 0 angle, D16300 command]
[Ingest 17:53:25 INFO] Sending XML status message
[Status 17:53:25 INFO] Mirror angle: 0
[Mirror 17:53:25 INFO] rotating to position V
[Status 17:53:26 INFO] .SET file for ACQ96 ready
[Ingest 17:53:26 INFO] Starting acquisition
[Status 17:53:27 INFO] reading housekeeping
[Status 17:53:45 INFO] acquire complete
[Status 17:53:46 INFO] writing housekeeping
[Sequencer 17:53:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:53:46 INFO] incremented V scene to 320 completed views
[Sequencer 17:53:46 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:53:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:53:46 INFO] incremented to [AERI set: name W320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:53:46 INFO] V320.SIG(18)
[sigmove 17:53:46 DEBUG] transformed V320Ma.SPC -> V320MA.SPC
[sigmove 17:53:46 DEBUG] transformed V320Mb.SPC -> V320MB.SPC
[sigmove 17:53:46 DEBUG] transformed V320Mc.SPC -> V320MC.SPC
[sigmove 17:53:46 DEBUG] transformed V320Md.SPC -> V320MD.SPC
[sigmove 17:53:46 DEBUG] transformed V320Me.SPC -> V320ME.SPC
[sigmove 17:53:46 DEBUG] transformed V320Mf.SPC -> V320MF.SPC
[Status 17:53:46 INFO] data for V320 transferred to science data processing
[Tidy 17:53:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:53:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:53:46 INFO] resetting WatchDogTimer
[Status 17:53:46 INFO] Starting Set [AERI set: name W320, 6 scans, 0 angle, D16300 command]
[Ingest 17:53:46 INFO] Sending XML status message
[Status 17:53:46 INFO] Mirror angle: 0
[Mirror 17:53:46 INFO] rotating to position W
[Status 17:53:47 INFO] .SET file for ACQ96 ready
[Ingest 17:53:47 INFO] Starting acquisition
[Status 17:53:48 INFO] reading housekeeping
[Status 17:54:06 INFO] acquire complete
[Status 17:54:07 INFO] writing housekeeping
[Sequencer 17:54:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:54:07 INFO] incremented W scene to 320 completed views
[Sequencer 17:54:07 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:54:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:54:07 INFO] incremented to [AERI set: name X320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:54:07 INFO] W320.SIG(18)
[sigmove 17:54:07 DEBUG] transformed W320Ma.SPC -> W320MA.SPC
[sigmove 17:54:07 DEBUG] transformed W320Mb.SPC -> W320MB.SPC
[sigmove 17:54:07 DEBUG] transformed W320Mc.SPC -> W320MC.SPC
[sigmove 17:54:07 DEBUG] transformed W320Md.SPC -> W320MD.SPC
[sigmove 17:54:07 DEBUG] transformed W320Me.SPC -> W320ME.SPC
[sigmove 17:54:07 DEBUG] transformed W320Mf.SPC -> W320MF.SPC
[Status 17:54:07 INFO] data for W320 transferred to science data processing
[Tidy 17:54:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:54:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:54:07 INFO] resetting WatchDogTimer
[Status 17:54:07 INFO] Starting Set [AERI set: name X320, 6 scans, 0 angle, D16300 command]
[Ingest 17:54:07 INFO] Sending XML status message
[Status 17:54:07 INFO] Mirror angle: 0
[Mirror 17:54:08 INFO] rotating to position X
[Status 17:54:08 INFO] .SET file for ACQ96 ready
[Ingest 17:54:09 INFO] Starting acquisition
[Status 17:54:09 INFO] reading housekeeping
[Status 17:54:27 INFO] acquire complete
[Status 17:54:28 INFO] writing housekeeping
[Sequencer 17:54:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:54:28 INFO] incremented X scene to 320 completed views
[Sequencer 17:54:28 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:54:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:54:28 INFO] incremented to [AERI set: name Y320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:54:28 INFO] X320.SIG(18)
[sigmove 17:54:28 DEBUG] transformed X320Ma.SPC -> X320MA.SPC
[sigmove 17:54:28 DEBUG] transformed X320Mb.SPC -> X320MB.SPC
[sigmove 17:54:28 DEBUG] transformed X320Mc.SPC -> X320MC.SPC
[sigmove 17:54:28 DEBUG] transformed X320Md.SPC -> X320MD.SPC
[sigmove 17:54:28 DEBUG] transformed X320Me.SPC -> X320ME.SPC
[sigmove 17:54:28 DEBUG] transformed X320Mf.SPC -> X320MF.SPC
[Status 17:54:28 INFO] data for X320 transferred to science data processing
[Tidy 17:54:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:54:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:54:28 INFO] resetting WatchDogTimer
[Status 17:54:29 INFO] Starting Set [AERI set: name Y320, 6 scans, 0 angle, D16300 command]
[Ingest 17:54:29 INFO] Sending XML status message
[Status 17:54:29 INFO] Mirror angle: 0
[Mirror 17:54:29 INFO] rotating to position Y
[Status 17:54:30 INFO] .SET file for ACQ96 ready
[Ingest 17:54:30 INFO] Starting acquisition
[Status 17:54:30 INFO] reading housekeeping
[Status 17:54:48 INFO] acquire complete
[Status 17:54:50 INFO] writing housekeeping
[Sequencer 17:54:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:54:50 INFO] incremented Y scene to 320 completed views
[Sequencer 17:54:50 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:54:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:54:50 INFO] incremented to [AERI set: name Z320, 6 scans, 0 angle, D16300 command] set
[sigmove 17:54:50 INFO] Y320.SIG(18)
[sigmove 17:54:50 DEBUG] transformed Y320Ma.SPC -> Y320MA.SPC
[sigmove 17:54:50 DEBUG] transformed Y320Mb.SPC -> Y320MB.SPC
[sigmove 17:54:50 DEBUG] transformed Y320Mc.SPC -> Y320MC.SPC
[sigmove 17:54:50 DEBUG] transformed Y320Md.SPC -> Y320MD.SPC
[sigmove 17:54:50 DEBUG] transformed Y320Me.SPC -> Y320ME.SPC
[sigmove 17:54:50 DEBUG] transformed Y320Mf.SPC -> Y320MF.SPC
[Status 17:54:50 INFO] data for Y320 transferred to science data processing
[Tidy 17:54:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:54:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:54:50 INFO] resetting WatchDogTimer
[Status 17:54:50 INFO] Starting Set [AERI set: name Z320, 6 scans, 0 angle, D16300 command]
[Ingest 17:54:50 INFO] Sending XML status message
[Status 17:54:50 INFO] Mirror angle: 0
[Mirror 17:54:50 INFO] rotating to position Z
[Status 17:54:51 INFO] .SET file for ACQ96 ready
[Ingest 17:54:51 INFO] Starting acquisition
[Status 17:54:52 INFO] reading housekeeping
[Status 17:55:10 INFO] acquire complete
[Status 17:55:11 INFO] writing housekeeping
[Sequencer 17:55:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:55:11 INFO] incremented Z scene to 320 completed views
[Sequencer 17:55:11 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:55:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:55:11 INFO] incremented to [AERI set: name H321, 6 scans, 60 angle, D22500 command] set
[sigmove 17:55:11 INFO] Z320.SIG(18)
[sigmove 17:55:11 DEBUG] transformed Z320Ma.SPC -> Z320MA.SPC
[sigmove 17:55:11 DEBUG] transformed Z320Mb.SPC -> Z320MB.SPC
[sigmove 17:55:11 DEBUG] transformed Z320Mc.SPC -> Z320MC.SPC
[sigmove 17:55:11 DEBUG] transformed Z320Md.SPC -> Z320MD.SPC
[sigmove 17:55:11 DEBUG] transformed Z320Me.SPC -> Z320ME.SPC
[sigmove 17:55:11 DEBUG] transformed Z320Mf.SPC -> Z320MF.SPC
[Status 17:55:11 INFO] data for Z320 transferred to science data processing
[Tidy 17:55:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:55:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:55:11 INFO] resetting WatchDogTimer
[Status 17:55:11 INFO] Starting Set [AERI set: name H321, 6 scans, 60 angle, D22500 command]
[Ingest 17:55:11 INFO] Sending XML status message
[Status 17:55:11 INFO] Mirror angle: 60
[Mirror 17:55:12 INFO] rotating to position H
[Status 17:55:13 INFO] .SET file for ACQ96 ready
[Ingest 17:55:13 INFO] Starting acquisition
[Status 17:55:13 INFO] reading housekeeping
[Status 17:55:31 INFO] acquire complete
[Status 17:55:32 INFO] writing housekeeping
[Sequencer 17:55:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:55:32 INFO] incremented H scene to 321 completed views
[Sequencer 17:55:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:55:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:55:32 INFO] incremented to [AERI set: name A321, 6 scans, 120 angle, D28300 command] set
[sigmove 17:55:32 INFO] H321.SIG(18)
[sigmove 17:55:32 DEBUG] transformed H321Ma.SPC -> H321MA.SPC
[sigmove 17:55:32 DEBUG] transformed H321Mb.SPC -> H321MB.SPC
[sigmove 17:55:32 DEBUG] transformed H321Mc.SPC -> H321MC.SPC
[sigmove 17:55:32 DEBUG] transformed H321Md.SPC -> H321MD.SPC
[sigmove 17:55:32 DEBUG] transformed H321Me.SPC -> H321ME.SPC
[sigmove 17:55:32 DEBUG] transformed H321Mf.SPC -> H321MF.SPC
[Status 17:55:32 INFO] data for H321 transferred to science data processing
[Tidy 17:55:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:55:32 INFO] A319.FIN(19),H319.FIN(19),S319.FIN(19),T319.FIN(19),U319.FIN(19),V319.FIN(19),W319.FIN(19),X319.FIN(19),Y319.FIN(19),Z319.FIN(19),A320.FIN(19),H320.FIN(19),S320.FIN(19),T320.FIN(19),U320.FIN(19),V320.FIN(19),W320.FIN(19),X320.FIN(19),Y320.FIN(19),Z320.FIN(19)
[sigmove 17:55:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:55:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 17:55:38 DEBUG] done zipping
[WatchDog 17:55:38 INFO] resetting WatchDogTimer
[Status 17:55:39 INFO] Starting Set [AERI set: name A321, 6 scans, 120 angle, D28300 command]
[Ingest 17:55:39 INFO] Sending XML status message
[Status 17:55:39 INFO] Mirror angle: 120
[Mirror 17:55:39 INFO] rotating to position A
[Status 17:55:40 INFO] .SET file for ACQ96 ready
[Ingest 17:55:40 INFO] Starting acquisition
[Status 17:55:41 INFO] reading housekeeping
[Status 17:55:58 INFO] acquire complete
[Status 17:55:59 INFO] writing housekeeping
[Sequencer 17:55:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:55:59 INFO] incremented A scene to 321 completed views
[Sequencer 17:55:59 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:55:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:55:59 INFO] incremented to [AERI set: name S321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:55:59 INFO] A321.SIG(18)
[sigmove 17:55:59 DEBUG] transformed A321Ma.SPC -> A321MA.SPC
[sigmove 17:55:59 DEBUG] transformed A321Mb.SPC -> A321MB.SPC
[sigmove 17:55:59 DEBUG] transformed A321Mc.SPC -> A321MC.SPC
[sigmove 17:55:59 DEBUG] transformed A321Md.SPC -> A321MD.SPC
[sigmove 17:55:59 DEBUG] transformed A321Me.SPC -> A321ME.SPC
[sigmove 17:55:59 DEBUG] transformed A321Mf.SPC -> A321MF.SPC
[Status 17:55:59 INFO] data for A321 transferred to science data processing
[Tidy 17:55:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:55:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:55:59 INFO] resetting WatchDogTimer
[Status 17:55:59 INFO] Starting Set [AERI set: name S321, 6 scans, 0 angle, D16300 command]
[Ingest 17:55:59 INFO] Sending XML status message
[Status 17:56:00 INFO] Mirror angle: 0
[Mirror 17:56:00 INFO] rotating to position S
[Status 17:56:01 INFO] .SET file for ACQ96 ready
[Ingest 17:56:02 INFO] Starting acquisition
[Status 17:56:02 INFO] reading housekeeping
[Status 17:56:19 INFO] acquire complete
[Status 17:56:20 INFO] writing housekeeping
[Sequencer 17:56:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:56:20 INFO] incremented S scene to 321 completed views
[Sequencer 17:56:20 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:56:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:56:20 INFO] incremented to [AERI set: name T321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:56:20 INFO] S321.SIG(18)
[sigmove 17:56:20 DEBUG] transformed S321Ma.SPC -> S321MA.SPC
[sigmove 17:56:20 DEBUG] transformed S321Mb.SPC -> S321MB.SPC
[sigmove 17:56:20 DEBUG] transformed S321Mc.SPC -> S321MC.SPC
[sigmove 17:56:20 DEBUG] transformed S321Md.SPC -> S321MD.SPC
[sigmove 17:56:20 DEBUG] transformed S321Me.SPC -> S321ME.SPC
[sigmove 17:56:20 DEBUG] transformed S321Mf.SPC -> S321MF.SPC
[Status 17:56:20 INFO] data for S321 transferred to science data processing
[Tidy 17:56:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:56:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:56:20 INFO] resetting WatchDogTimer
[Status 17:56:21 INFO] Starting Set [AERI set: name T321, 6 scans, 0 angle, D16300 command]
[Ingest 17:56:21 INFO] Sending XML status message
[Status 17:56:21 INFO] Mirror angle: 0
[Mirror 17:56:21 INFO] rotating to position T
[Status 17:56:22 INFO] .SET file for ACQ96 ready
[Ingest 17:56:22 INFO] Starting acquisition
[Status 17:56:22 INFO] reading housekeeping
[Status 17:56:41 INFO] acquire complete
[Status 17:56:42 INFO] writing housekeeping
[Sequencer 17:56:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:56:42 INFO] incremented T scene to 321 completed views
[Sequencer 17:56:42 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:56:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:56:42 INFO] incremented to [AERI set: name U321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:56:42 INFO] T321.SIG(18)
[sigmove 17:56:42 DEBUG] transformed T321Ma.SPC -> T321MA.SPC
[sigmove 17:56:42 DEBUG] transformed T321Mb.SPC -> T321MB.SPC
[sigmove 17:56:42 DEBUG] transformed T321Mc.SPC -> T321MC.SPC
[sigmove 17:56:42 DEBUG] transformed T321Md.SPC -> T321MD.SPC
[sigmove 17:56:42 DEBUG] transformed T321Me.SPC -> T321ME.SPC
[sigmove 17:56:42 DEBUG] transformed T321Mf.SPC -> T321MF.SPC
[Status 17:56:42 INFO] data for T321 transferred to science data processing
[Tidy 17:56:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:56:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:56:42 INFO] resetting WatchDogTimer
[Status 17:56:42 INFO] Starting Set [AERI set: name U321, 6 scans, 0 angle, D16300 command]
[Ingest 17:56:42 INFO] Sending XML status message
[Status 17:56:42 INFO] Mirror angle: 0
[Mirror 17:56:43 INFO] rotating to position U
[Status 17:56:43 INFO] .SET file for ACQ96 ready
[Ingest 17:56:43 INFO] Starting acquisition
[Status 17:56:44 INFO] reading housekeeping
[Status 17:57:02 INFO] acquire complete
[Status 17:57:03 INFO] writing housekeeping
[Sequencer 17:57:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:57:03 INFO] incremented U scene to 321 completed views
[Sequencer 17:57:03 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:57:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:57:03 INFO] incremented to [AERI set: name V321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:57:03 INFO] U321.SIG(18)
[sigmove 17:57:03 DEBUG] transformed U321Ma.SPC -> U321MA.SPC
[sigmove 17:57:03 DEBUG] transformed U321Mb.SPC -> U321MB.SPC
[sigmove 17:57:03 DEBUG] transformed U321Mc.SPC -> U321MC.SPC
[sigmove 17:57:03 DEBUG] transformed U321Md.SPC -> U321MD.SPC
[sigmove 17:57:03 DEBUG] transformed U321Me.SPC -> U321ME.SPC
[sigmove 17:57:03 DEBUG] transformed U321Mf.SPC -> U321MF.SPC
[Status 17:57:03 INFO] data for U321 transferred to science data processing
[Tidy 17:57:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:57:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:57:03 INFO] resetting WatchDogTimer
[Status 17:57:03 INFO] Starting Set [AERI set: name V321, 6 scans, 0 angle, D16300 command]
[Ingest 17:57:03 INFO] Sending XML status message
[Status 17:57:03 INFO] Mirror angle: 0
[Mirror 17:57:04 INFO] rotating to position V
[Status 17:57:04 INFO] .SET file for ACQ96 ready
[Ingest 17:57:05 INFO] Starting acquisition
[Status 17:57:05 INFO] reading housekeeping
[Status 17:57:23 INFO] acquire complete
[Status 17:57:24 INFO] writing housekeeping
[Sequencer 17:57:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:57:24 INFO] incremented V scene to 321 completed views
[Sequencer 17:57:24 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:57:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:57:24 INFO] incremented to [AERI set: name W321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:57:24 INFO] V321.SIG(18)
[sigmove 17:57:24 DEBUG] transformed V321Ma.SPC -> V321MA.SPC
[sigmove 17:57:24 DEBUG] transformed V321Mb.SPC -> V321MB.SPC
[sigmove 17:57:24 DEBUG] transformed V321Mc.SPC -> V321MC.SPC
[sigmove 17:57:24 DEBUG] transformed V321Md.SPC -> V321MD.SPC
[sigmove 17:57:24 DEBUG] transformed V321Me.SPC -> V321ME.SPC
[sigmove 17:57:24 DEBUG] transformed V321Mf.SPC -> V321MF.SPC
[Status 17:57:24 INFO] data for V321 transferred to science data processing
[Tidy 17:57:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:57:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:57:24 INFO] resetting WatchDogTimer
[Status 17:57:25 INFO] Starting Set [AERI set: name W321, 6 scans, 0 angle, D16300 command]
[Ingest 17:57:25 INFO] Sending XML status message
[Status 17:57:25 INFO] Mirror angle: 0
[Mirror 17:57:25 INFO] rotating to position W
[Status 17:57:26 INFO] .SET file for ACQ96 ready
[Ingest 17:57:26 INFO] Starting acquisition
[Status 17:57:26 INFO] reading housekeeping
[Status 17:57:45 INFO] acquire complete
[Status 17:57:46 INFO] writing housekeeping
[Sequencer 17:57:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:57:46 INFO] incremented W scene to 321 completed views
[Sequencer 17:57:46 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:57:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:57:46 INFO] incremented to [AERI set: name X321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:57:46 INFO] W321.SIG(18)
[sigmove 17:57:46 DEBUG] transformed W321Ma.SPC -> W321MA.SPC
[sigmove 17:57:46 DEBUG] transformed W321Mb.SPC -> W321MB.SPC
[sigmove 17:57:46 DEBUG] transformed W321Mc.SPC -> W321MC.SPC
[sigmove 17:57:46 DEBUG] transformed W321Md.SPC -> W321MD.SPC
[sigmove 17:57:46 DEBUG] transformed W321Me.SPC -> W321ME.SPC
[sigmove 17:57:46 DEBUG] transformed W321Mf.SPC -> W321MF.SPC
[Status 17:57:46 INFO] data for W321 transferred to science data processing
[Tidy 17:57:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:57:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:57:46 INFO] resetting WatchDogTimer
[Status 17:57:46 INFO] Starting Set [AERI set: name X321, 6 scans, 0 angle, D16300 command]
[Ingest 17:57:46 INFO] Sending XML status message
[Status 17:57:46 INFO] Mirror angle: 0
[Mirror 17:57:46 INFO] rotating to position X
[Status 17:57:47 INFO] .SET file for ACQ96 ready
[Ingest 17:57:47 INFO] Starting acquisition
[Status 17:57:48 INFO] reading housekeeping
[Status 17:58:06 INFO] acquire complete
[Status 17:58:07 INFO] writing housekeeping
[Sequencer 17:58:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:58:07 INFO] incremented X scene to 321 completed views
[Sequencer 17:58:07 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:58:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:58:07 INFO] incremented to [AERI set: name Y321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:58:07 INFO] X321.SIG(18)
[sigmove 17:58:07 DEBUG] transformed X321Ma.SPC -> X321MA.SPC
[sigmove 17:58:07 DEBUG] transformed X321Mb.SPC -> X321MB.SPC
[sigmove 17:58:07 DEBUG] transformed X321Mc.SPC -> X321MC.SPC
[sigmove 17:58:07 DEBUG] transformed X321Md.SPC -> X321MD.SPC
[sigmove 17:58:07 DEBUG] transformed X321Me.SPC -> X321ME.SPC
[sigmove 17:58:07 DEBUG] transformed X321Mf.SPC -> X321MF.SPC
[Status 17:58:07 INFO] data for X321 transferred to science data processing
[Tidy 17:58:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:58:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:58:07 INFO] resetting WatchDogTimer
[Status 17:58:07 INFO] Starting Set [AERI set: name Y321, 6 scans, 0 angle, D16300 command]
[Ingest 17:58:07 INFO] Sending XML status message
[Status 17:58:07 INFO] Mirror angle: 0
[Mirror 17:58:08 INFO] rotating to position Y
[Status 17:58:08 INFO] .SET file for ACQ96 ready
[Ingest 17:58:09 INFO] Starting acquisition
[Status 17:58:09 INFO] reading housekeeping
[Status 17:58:27 INFO] acquire complete
[Status 17:58:28 INFO] writing housekeeping
[Sequencer 17:58:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:58:28 INFO] incremented Y scene to 321 completed views
[Sequencer 17:58:28 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:58:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:58:28 INFO] incremented to [AERI set: name Z321, 6 scans, 0 angle, D16300 command] set
[sigmove 17:58:28 INFO] Y321.SIG(18)
[sigmove 17:58:28 DEBUG] transformed Y321Ma.SPC -> Y321MA.SPC
[sigmove 17:58:28 DEBUG] transformed Y321Mb.SPC -> Y321MB.SPC
[sigmove 17:58:28 DEBUG] transformed Y321Mc.SPC -> Y321MC.SPC
[sigmove 17:58:28 DEBUG] transformed Y321Md.SPC -> Y321MD.SPC
[sigmove 17:58:28 DEBUG] transformed Y321Me.SPC -> Y321ME.SPC
[sigmove 17:58:28 DEBUG] transformed Y321Mf.SPC -> Y321MF.SPC
[Status 17:58:28 INFO] data for Y321 transferred to science data processing
[Tidy 17:58:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:58:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:58:28 INFO] resetting WatchDogTimer
[Status 17:58:29 INFO] Starting Set [AERI set: name Z321, 6 scans, 0 angle, D16300 command]
[Ingest 17:58:29 INFO] Sending XML status message
[Status 17:58:29 INFO] Mirror angle: 0
[Mirror 17:58:29 INFO] rotating to position Z
[Status 17:58:30 INFO] .SET file for ACQ96 ready
[Ingest 17:58:30 INFO] Starting acquisition
[Status 17:58:30 INFO] reading housekeeping
[Status 17:58:48 INFO] acquire complete
[Status 17:58:50 INFO] writing housekeeping
[Sequencer 17:58:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:58:50 INFO] incremented Z scene to 321 completed views
[Sequencer 17:58:50 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 17:58:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:58:50 INFO] incremented to [AERI set: name A322, 6 scans, 120 angle, D28300 command] set
[sigmove 17:58:50 INFO] Z321.SIG(18)
[sigmove 17:58:50 DEBUG] transformed Z321Ma.SPC -> Z321MA.SPC
[sigmove 17:58:50 DEBUG] transformed Z321Mb.SPC -> Z321MB.SPC
[sigmove 17:58:50 DEBUG] transformed Z321Mc.SPC -> Z321MC.SPC
[sigmove 17:58:50 DEBUG] transformed Z321Md.SPC -> Z321MD.SPC
[sigmove 17:58:50 DEBUG] transformed Z321Me.SPC -> Z321ME.SPC
[sigmove 17:58:50 DEBUG] transformed Z321Mf.SPC -> Z321MF.SPC
[Status 17:58:50 INFO] data for Z321 transferred to science data processing
[Tidy 17:58:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:58:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:58:50 INFO] resetting WatchDogTimer
[Status 17:58:50 INFO] Starting Set [AERI set: name A322, 6 scans, 120 angle, D28300 command]
[Ingest 17:58:50 INFO] Sending XML status message
[Status 17:58:50 INFO] Mirror angle: 120
[Mirror 17:58:50 INFO] rotating to position A
[Status 17:58:52 INFO] .SET file for ACQ96 ready
[Ingest 17:58:52 INFO] Starting acquisition
[Status 17:58:53 INFO] reading housekeeping
[Status 17:59:10 INFO] acquire complete
[Status 17:59:11 INFO] writing housekeeping
[Sequencer 17:59:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:59:11 INFO] incremented A scene to 322 completed views
[Sequencer 17:59:11 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 17:59:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:59:11 INFO] incremented to [AERI set: name H322, 6 scans, 60 angle, D22500 command] set
[sigmove 17:59:11 INFO] A322.SIG(18)
[sigmove 17:59:11 DEBUG] transformed A322Ma.SPC -> A322MA.SPC
[sigmove 17:59:11 DEBUG] transformed A322Mb.SPC -> A322MB.SPC
[sigmove 17:59:11 DEBUG] transformed A322Mc.SPC -> A322MC.SPC
[sigmove 17:59:11 DEBUG] transformed A322Md.SPC -> A322MD.SPC
[sigmove 17:59:11 DEBUG] transformed A322Me.SPC -> A322ME.SPC
[sigmove 17:59:11 DEBUG] transformed A322Mf.SPC -> A322MF.SPC
[Status 17:59:11 INFO] data for A322 transferred to science data processing
[Tidy 17:59:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:59:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:59:11 INFO] resetting WatchDogTimer
[Status 17:59:11 INFO] Starting Set [AERI set: name H322, 6 scans, 60 angle, D22500 command]
[Ingest 17:59:11 INFO] Sending XML status message
[Status 17:59:11 INFO] Mirror angle: 60
[Mirror 17:59:12 INFO] rotating to position H
[Status 17:59:13 INFO] .SET file for ACQ96 ready
[Ingest 17:59:13 INFO] Starting acquisition
[Status 17:59:13 INFO] reading housekeeping
[Status 17:59:31 INFO] acquire complete
[Status 17:59:32 INFO] writing housekeeping
[Sequencer 17:59:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:59:32 INFO] incremented H scene to 322 completed views
[Sequencer 17:59:32 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 17:59:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:59:32 INFO] incremented to [AERI set: name S322, 6 scans, 0 angle, D16300 command] set
[sigmove 17:59:32 INFO] H322.SIG(18)
[sigmove 17:59:32 DEBUG] transformed H322Ma.SPC -> H322MA.SPC
[sigmove 17:59:32 DEBUG] transformed H322Mb.SPC -> H322MB.SPC
[sigmove 17:59:32 DEBUG] transformed H322Mc.SPC -> H322MC.SPC
[sigmove 17:59:32 DEBUG] transformed H322Md.SPC -> H322MD.SPC
[sigmove 17:59:32 DEBUG] transformed H322Me.SPC -> H322ME.SPC
[sigmove 17:59:32 DEBUG] transformed H322Mf.SPC -> H322MF.SPC
[Status 17:59:32 INFO] data for H322 transferred to science data processing
[Tidy 17:59:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:59:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:59:32 INFO] resetting WatchDogTimer
[Status 17:59:33 INFO] Starting Set [AERI set: name S322, 6 scans, 0 angle, D16300 command]
[Ingest 17:59:33 INFO] Sending XML status message
[Status 17:59:33 INFO] Mirror angle: 0
[Mirror 17:59:33 INFO] rotating to position S
[Status 17:59:34 INFO] .SET file for ACQ96 ready
[Ingest 17:59:34 INFO] Starting acquisition
[Status 17:59:35 INFO] reading housekeeping
[Status 17:59:52 INFO] acquire complete
[Status 17:59:53 INFO] writing housekeeping
[Sequencer 17:59:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 17:59:53 INFO] incremented S scene to 322 completed views
[Sequencer 17:59:53 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 17:59:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 17:59:53 INFO] incremented to [AERI set: name T322, 6 scans, 0 angle, D16300 command] set
[sigmove 17:59:53 INFO] S322.SIG(18)
[sigmove 17:59:53 DEBUG] transformed S322Ma.SPC -> S322MA.SPC
[sigmove 17:59:54 DEBUG] transformed S322Mb.SPC -> S322MB.SPC
[sigmove 17:59:54 DEBUG] transformed S322Mc.SPC -> S322MC.SPC
[sigmove 17:59:54 DEBUG] transformed S322Md.SPC -> S322MD.SPC
[sigmove 17:59:54 DEBUG] transformed S322Me.SPC -> S322ME.SPC
[sigmove 17:59:54 DEBUG] transformed S322Mf.SPC -> S322MF.SPC
[Status 17:59:54 INFO] data for S322 transferred to science data processing
[Tidy 17:59:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 17:59:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 17:59:54 INFO] resetting WatchDogTimer
[Status 17:59:54 INFO] Starting Set [AERI set: name T322, 6 scans, 0 angle, D16300 command]
[Ingest 17:59:54 INFO] Sending XML status message
[Status 17:59:54 INFO] Mirror angle: 0
[Mirror 17:59:54 INFO] rotating to position T
[Status 17:59:55 INFO] .SET file for ACQ96 ready
[Ingest 17:59:55 INFO] Starting acquisition
[Status 17:59:56 INFO] reading housekeeping
[Status 18:00:14 INFO] acquire complete
[Status 18:00:15 INFO] writing housekeeping
[Sequencer 18:00:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:00:15 INFO] incremented T scene to 322 completed views
[Sequencer 18:00:15 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:00:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:00:15 INFO] incremented to [AERI set: name U322, 6 scans, 0 angle, D16300 command] set
[sigmove 18:00:15 INFO] T322.SIG(18)
[sigmove 18:00:15 DEBUG] transformed T322Ma.SPC -> T322MA.SPC
[sigmove 18:00:15 DEBUG] transformed T322Mb.SPC -> T322MB.SPC
[sigmove 18:00:15 DEBUG] transformed T322Mc.SPC -> T322MC.SPC
[sigmove 18:00:15 DEBUG] transformed T322Md.SPC -> T322MD.SPC
[sigmove 18:00:15 DEBUG] transformed T322Me.SPC -> T322ME.SPC
[sigmove 18:00:15 DEBUG] transformed T322Mf.SPC -> T322MF.SPC
[Status 18:00:15 INFO] data for T322 transferred to science data processing
[Tidy 18:00:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:00:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:00:15 INFO] resetting WatchDogTimer
[Status 18:00:15 INFO] Starting Set [AERI set: name U322, 6 scans, 0 angle, D16300 command]
[Ingest 18:00:15 INFO] Sending XML status message
[Status 18:00:15 INFO] Mirror angle: 0
[Mirror 18:00:16 INFO] rotating to position U
[Status 18:00:16 INFO] .SET file for ACQ96 ready
[Ingest 18:00:16 INFO] Starting acquisition
[Status 18:00:17 INFO] reading housekeeping
[Status 18:00:35 INFO] acquire complete
[Status 18:00:36 INFO] writing housekeeping
[Sequencer 18:00:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:00:36 INFO] incremented U scene to 322 completed views
[Sequencer 18:00:36 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:00:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:00:36 INFO] incremented to [AERI set: name V322, 6 scans, 0 angle, D16300 command] set
[sigmove 18:00:36 INFO] U322.SIG(18)
[sigmove 18:00:36 DEBUG] transformed U322Ma.SPC -> U322MA.SPC
[sigmove 18:00:36 DEBUG] transformed U322Mb.SPC -> U322MB.SPC
[sigmove 18:00:36 DEBUG] transformed U322Mc.SPC -> U322MC.SPC
[sigmove 18:00:36 DEBUG] transformed U322Md.SPC -> U322MD.SPC
[sigmove 18:00:36 DEBUG] transformed U322Me.SPC -> U322ME.SPC
[sigmove 18:00:36 DEBUG] transformed U322Mf.SPC -> U322MF.SPC
[Status 18:00:36 INFO] data for U322 transferred to science data processing
[Tidy 18:00:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:00:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:00:36 INFO] resetting WatchDogTimer
[Status 18:00:37 INFO] Starting Set [AERI set: name V322, 6 scans, 0 angle, D16300 command]
[Ingest 18:00:37 INFO] Sending XML status message
[Status 18:00:37 INFO] Mirror angle: 0
[Mirror 18:00:37 INFO] rotating to position V
[Status 18:00:37 INFO] .SET file for ACQ96 ready
[Ingest 18:00:38 INFO] Starting acquisition
[Status 18:00:38 INFO] reading housekeeping
[Status 18:00:56 INFO] acquire complete
[Status 18:00:57 INFO] writing housekeeping
[Sequencer 18:00:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:00:57 INFO] incremented V scene to 322 completed views
[Sequencer 18:00:57 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:00:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:00:57 INFO] incremented to [AERI set: name W322, 6 scans, 0 angle, D16300 command] set
[sigmove 18:00:57 INFO] V322.SIG(18)
[sigmove 18:00:57 DEBUG] transformed V322Ma.SPC -> V322MA.SPC
[sigmove 18:00:57 DEBUG] transformed V322Mb.SPC -> V322MB.SPC
[sigmove 18:00:57 DEBUG] transformed V322Mc.SPC -> V322MC.SPC
[sigmove 18:00:57 DEBUG] transformed V322Md.SPC -> V322MD.SPC
[sigmove 18:00:57 DEBUG] transformed V322Me.SPC -> V322ME.SPC
[sigmove 18:00:57 DEBUG] transformed V322Mf.SPC -> V322MF.SPC
[Status 18:00:57 INFO] data for V322 transferred to science data processing
[Tidy 18:00:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:00:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:00:57 INFO] resetting WatchDogTimer
[Status 18:00:58 INFO] Starting Set [AERI set: name W322, 6 scans, 0 angle, D16300 command]
[Ingest 18:00:58 INFO] Sending XML status message
[Status 18:00:58 INFO] Mirror angle: 0
[Mirror 18:00:58 INFO] rotating to position W
[Status 18:00:59 INFO] .SET file for ACQ96 ready
[Ingest 18:00:59 INFO] Starting acquisition
[Status 18:01:00 INFO] reading housekeeping
[Status 18:01:18 INFO] acquire complete
[Status 18:01:19 INFO] writing housekeeping
[Sequencer 18:01:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:01:19 INFO] incremented W scene to 322 completed views
[Sequencer 18:01:19 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:01:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:01:19 INFO] incremented to [AERI set: name X322, 6 scans, 0 angle, D16300 command] set
[sigmove 18:01:19 INFO] W322.SIG(18)
[sigmove 18:01:19 DEBUG] transformed W322Ma.SPC -> W322MA.SPC
[sigmove 18:01:19 DEBUG] transformed W322Mb.SPC -> W322MB.SPC
[sigmove 18:01:19 DEBUG] transformed W322Mc.SPC -> W322MC.SPC
[sigmove 18:01:19 DEBUG] transformed W322Md.SPC -> W322MD.SPC
[sigmove 18:01:19 DEBUG] transformed W322Me.SPC -> W322ME.SPC
[sigmove 18:01:19 DEBUG] transformed W322Mf.SPC -> W322MF.SPC
[Status 18:01:19 INFO] data for W322 transferred to science data processing
[Tidy 18:01:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:01:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:01:19 INFO] resetting WatchDogTimer
[Status 18:01:19 INFO] Starting Set [AERI set: name X322, 6 scans, 0 angle, D16300 command]
[Ingest 18:01:19 INFO] Sending XML status message
[Status 18:01:19 INFO] Mirror angle: 0
[Mirror 18:01:20 INFO] rotating to position X
[Status 18:01:20 INFO] .SET file for ACQ96 ready
[Ingest 18:01:20 INFO] Starting acquisition
[Status 18:01:21 INFO] reading housekeeping
[Status 18:01:39 INFO] acquire complete
[Status 18:01:40 INFO] writing housekeeping
[Sequencer 18:01:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:01:40 INFO] incremented X scene to 322 completed views
[Sequencer 18:01:40 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:01:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:01:40 INFO] incremented to [AERI set: name Y322, 6 scans, 0 angle, D16300 command] set
[sigmove 18:01:40 INFO] X322.SIG(18)
[sigmove 18:01:40 DEBUG] transformed X322Ma.SPC -> X322MA.SPC
[sigmove 18:01:40 DEBUG] transformed X322Mb.SPC -> X322MB.SPC
[sigmove 18:01:40 DEBUG] transformed X322Mc.SPC -> X322MC.SPC
[sigmove 18:01:40 DEBUG] transformed X322Md.SPC -> X322MD.SPC
[sigmove 18:01:40 DEBUG] transformed X322Me.SPC -> X322ME.SPC
[sigmove 18:01:40 DEBUG] transformed X322Mf.SPC -> X322MF.SPC
[Status 18:01:40 INFO] data for X322 transferred to science data processing
[Tidy 18:01:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:01:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:01:40 INFO] resetting WatchDogTimer
[Status 18:01:40 INFO] Starting Set [AERI set: name Y322, 6 scans, 0 angle, D16300 command]
[Ingest 18:01:40 INFO] Sending XML status message
[Status 18:01:40 INFO] Mirror angle: 0
[Mirror 18:01:41 INFO] rotating to position Y
[Status 18:01:41 INFO] .SET file for ACQ96 ready
[Ingest 18:01:42 INFO] Starting acquisition
[Status 18:01:42 INFO] reading housekeeping
[Status 18:02:00 INFO] acquire complete
[Status 18:02:01 INFO] writing housekeeping
[Sequencer 18:02:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:02:01 INFO] incremented Y scene to 322 completed views
[Sequencer 18:02:01 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:02:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:02:01 INFO] incremented to [AERI set: name Z322, 6 scans, 0 angle, D16300 command] set
[sigmove 18:02:01 INFO] Y322.SIG(18)
[sigmove 18:02:01 DEBUG] transformed Y322Ma.SPC -> Y322MA.SPC
[sigmove 18:02:01 DEBUG] transformed Y322Mb.SPC -> Y322MB.SPC
[sigmove 18:02:01 DEBUG] transformed Y322Mc.SPC -> Y322MC.SPC
[sigmove 18:02:01 DEBUG] transformed Y322Md.SPC -> Y322MD.SPC
[sigmove 18:02:01 DEBUG] transformed Y322Me.SPC -> Y322ME.SPC
[sigmove 18:02:01 DEBUG] transformed Y322Mf.SPC -> Y322MF.SPC
[Status 18:02:01 INFO] data for Y322 transferred to science data processing
[Tidy 18:02:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:02:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:02:01 INFO] resetting WatchDogTimer
[Status 18:02:02 INFO] Starting Set [AERI set: name Z322, 6 scans, 0 angle, D16300 command]
[Ingest 18:02:02 INFO] Sending XML status message
[Status 18:02:02 INFO] Mirror angle: 0
[Mirror 18:02:02 INFO] rotating to position Z
[Status 18:02:03 INFO] .SET file for ACQ96 ready
[Ingest 18:02:03 INFO] Starting acquisition
[Status 18:02:03 INFO] reading housekeeping
[Status 18:02:22 INFO] acquire complete
[Status 18:02:23 INFO] writing housekeeping
[Sequencer 18:02:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:02:23 INFO] incremented Z scene to 322 completed views
[Sequencer 18:02:23 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:02:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:02:23 INFO] incremented to [AERI set: name H323, 6 scans, 60 angle, D22500 command] set
[sigmove 18:02:23 INFO] Z322.SIG(18)
[sigmove 18:02:23 DEBUG] transformed Z322Ma.SPC -> Z322MA.SPC
[sigmove 18:02:23 DEBUG] transformed Z322Mb.SPC -> Z322MB.SPC
[sigmove 18:02:23 DEBUG] transformed Z322Mc.SPC -> Z322MC.SPC
[sigmove 18:02:23 DEBUG] transformed Z322Md.SPC -> Z322MD.SPC
[sigmove 18:02:23 DEBUG] transformed Z322Me.SPC -> Z322ME.SPC
[sigmove 18:02:23 DEBUG] transformed Z322Mf.SPC -> Z322MF.SPC
[Status 18:02:23 INFO] data for Z322 transferred to science data processing
[Tidy 18:02:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:02:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:02:23 INFO] resetting WatchDogTimer
[Status 18:02:23 INFO] Starting Set [AERI set: name H323, 6 scans, 60 angle, D22500 command]
[Ingest 18:02:23 INFO] Sending XML status message
[Status 18:02:23 INFO] Mirror angle: 60
[Mirror 18:02:23 INFO] rotating to position H
[Status 18:02:25 INFO] .SET file for ACQ96 ready
[Ingest 18:02:25 INFO] Starting acquisition
[Status 18:02:25 INFO] reading housekeeping
[Status 18:02:43 INFO] acquire complete
[Status 18:02:44 INFO] writing housekeeping
[Sequencer 18:02:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:02:44 INFO] incremented H scene to 323 completed views
[Sequencer 18:02:44 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:02:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:02:44 INFO] incremented to [AERI set: name A323, 6 scans, 120 angle, D28300 command] set
[sigmove 18:02:44 INFO] H323.SIG(18)
[sigmove 18:02:44 DEBUG] transformed H323Ma.SPC -> H323MA.SPC
[sigmove 18:02:44 DEBUG] transformed H323Mb.SPC -> H323MB.SPC
[sigmove 18:02:44 DEBUG] transformed H323Mc.SPC -> H323MC.SPC
[sigmove 18:02:44 DEBUG] transformed H323Md.SPC -> H323MD.SPC
[sigmove 18:02:44 DEBUG] transformed H323Me.SPC -> H323ME.SPC
[sigmove 18:02:44 DEBUG] transformed H323Mf.SPC -> H323MF.SPC
[Status 18:02:44 INFO] data for H323 transferred to science data processing
[Tidy 18:02:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:02:44 INFO] A321.FIN(19),H321.FIN(19),S321.FIN(19),T321.FIN(19),U321.FIN(19),V321.FIN(19),W321.FIN(19),X321.FIN(19),Y321.FIN(19),Z321.FIN(19),A322.FIN(19),H322.FIN(19),S322.FIN(19),T322.FIN(19),U322.FIN(19),V322.FIN(19),W322.FIN(19),X322.FIN(19),Y322.FIN(19),Z322.FIN(19)
[sigmove 18:02:44 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:02:44 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:02:50 DEBUG] done zipping
[WatchDog 18:02:50 INFO] resetting WatchDogTimer
[Status 18:02:50 INFO] Starting Set [AERI set: name A323, 6 scans, 120 angle, D28300 command]
[Ingest 18:02:50 INFO] Sending XML status message
[Status 18:02:50 INFO] Mirror angle: 120
[Mirror 18:02:51 INFO] rotating to position A
[Status 18:02:52 INFO] .SET file for ACQ96 ready
[Ingest 18:02:52 INFO] Starting acquisition
[Status 18:02:53 INFO] reading housekeeping
[Status 18:03:10 INFO] acquire complete
[Status 18:03:11 INFO] writing housekeeping
[Sequencer 18:03:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:03:11 INFO] incremented A scene to 323 completed views
[Sequencer 18:03:11 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:03:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:03:11 INFO] incremented to [AERI set: name S323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:03:11 INFO] A323.SIG(18)
[sigmove 18:03:11 DEBUG] transformed A323Ma.SPC -> A323MA.SPC
[sigmove 18:03:11 DEBUG] transformed A323Mb.SPC -> A323MB.SPC
[sigmove 18:03:11 DEBUG] transformed A323Mc.SPC -> A323MC.SPC
[sigmove 18:03:11 DEBUG] transformed A323Md.SPC -> A323MD.SPC
[sigmove 18:03:11 DEBUG] transformed A323Me.SPC -> A323ME.SPC
[sigmove 18:03:11 DEBUG] transformed A323Mf.SPC -> A323MF.SPC
[Status 18:03:11 INFO] data for A323 transferred to science data processing
[Tidy 18:03:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:03:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:03:11 INFO] resetting WatchDogTimer
[Status 18:03:11 INFO] Starting Set [AERI set: name S323, 6 scans, 0 angle, D16300 command]
[Ingest 18:03:11 INFO] Sending XML status message
[Status 18:03:11 INFO] Mirror angle: 0
[Mirror 18:03:12 INFO] rotating to position S
[Status 18:03:13 INFO] .SET file for ACQ96 ready
[Ingest 18:03:14 INFO] Starting acquisition
[Status 18:03:14 INFO] reading housekeeping
[Status 18:03:31 INFO] acquire complete
[Status 18:03:32 INFO] writing housekeeping
[Sequencer 18:03:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:03:32 INFO] incremented S scene to 323 completed views
[Sequencer 18:03:32 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:03:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:03:32 INFO] incremented to [AERI set: name T323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:03:32 INFO] S323.SIG(18)
[sigmove 18:03:32 DEBUG] transformed S323Ma.SPC -> S323MA.SPC
[sigmove 18:03:32 DEBUG] transformed S323Mb.SPC -> S323MB.SPC
[sigmove 18:03:32 DEBUG] transformed S323Mc.SPC -> S323MC.SPC
[sigmove 18:03:32 DEBUG] transformed S323Md.SPC -> S323MD.SPC
[sigmove 18:03:32 DEBUG] transformed S323Me.SPC -> S323ME.SPC
[sigmove 18:03:32 DEBUG] transformed S323Mf.SPC -> S323MF.SPC
[Status 18:03:32 INFO] data for S323 transferred to science data processing
[Tidy 18:03:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:03:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:03:32 INFO] resetting WatchDogTimer
[Status 18:03:33 INFO] Starting Set [AERI set: name T323, 6 scans, 0 angle, D16300 command]
[Ingest 18:03:33 INFO] Sending XML status message
[Status 18:03:33 INFO] Mirror angle: 0
[Mirror 18:03:33 INFO] rotating to position T
[Status 18:03:33 INFO] .SET file for ACQ96 ready
[Ingest 18:03:34 INFO] Starting acquisition
[Status 18:03:34 INFO] reading housekeeping
[Status 18:03:52 INFO] acquire complete
[Status 18:03:53 INFO] writing housekeeping
[Sequencer 18:03:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:03:53 INFO] incremented T scene to 323 completed views
[Sequencer 18:03:53 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:03:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:03:53 INFO] incremented to [AERI set: name U323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:03:53 INFO] T323.SIG(18)
[sigmove 18:03:53 DEBUG] transformed T323Ma.SPC -> T323MA.SPC
[sigmove 18:03:53 DEBUG] transformed T323Mb.SPC -> T323MB.SPC
[sigmove 18:03:53 DEBUG] transformed T323Mc.SPC -> T323MC.SPC
[sigmove 18:03:53 DEBUG] transformed T323Md.SPC -> T323MD.SPC
[sigmove 18:03:53 DEBUG] transformed T323Me.SPC -> T323ME.SPC
[sigmove 18:03:53 DEBUG] transformed T323Mf.SPC -> T323MF.SPC
[Status 18:03:53 INFO] data for T323 transferred to science data processing
[Tidy 18:03:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:03:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:03:53 INFO] resetting WatchDogTimer
[Status 18:03:54 INFO] Starting Set [AERI set: name U323, 6 scans, 0 angle, D16300 command]
[Ingest 18:03:54 INFO] Sending XML status message
[Status 18:03:54 INFO] Mirror angle: 0
[Mirror 18:03:54 INFO] rotating to position U
[Status 18:03:55 INFO] .SET file for ACQ96 ready
[Ingest 18:03:55 INFO] Starting acquisition
[Status 18:03:56 INFO] reading housekeeping
[Status 18:04:14 INFO] acquire complete
[Status 18:04:15 INFO] writing housekeeping
[Sequencer 18:04:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:04:15 INFO] incremented U scene to 323 completed views
[Sequencer 18:04:15 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:04:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:04:15 INFO] incremented to [AERI set: name V323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:04:15 INFO] U323.SIG(18)
[sigmove 18:04:15 DEBUG] transformed U323Ma.SPC -> U323MA.SPC
[sigmove 18:04:15 DEBUG] transformed U323Mb.SPC -> U323MB.SPC
[sigmove 18:04:15 DEBUG] transformed U323Mc.SPC -> U323MC.SPC
[sigmove 18:04:15 DEBUG] transformed U323Md.SPC -> U323MD.SPC
[sigmove 18:04:15 DEBUG] transformed U323Me.SPC -> U323ME.SPC
[sigmove 18:04:15 DEBUG] transformed U323Mf.SPC -> U323MF.SPC
[Status 18:04:15 INFO] data for U323 transferred to science data processing
[Tidy 18:04:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:04:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:04:15 INFO] resetting WatchDogTimer
[Status 18:04:15 INFO] Starting Set [AERI set: name V323, 6 scans, 0 angle, D16300 command]
[Ingest 18:04:15 INFO] Sending XML status message
[Status 18:04:15 INFO] Mirror angle: 0
[Mirror 18:04:16 INFO] rotating to position V
[Status 18:04:16 INFO] .SET file for ACQ96 ready
[Ingest 18:04:16 INFO] Starting acquisition
[Status 18:04:17 INFO] reading housekeeping
[Status 18:04:35 INFO] acquire complete
[Status 18:04:36 INFO] writing housekeeping
[Sequencer 18:04:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:04:36 INFO] incremented V scene to 323 completed views
[Sequencer 18:04:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:04:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:04:36 INFO] incremented to [AERI set: name W323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:04:36 INFO] V323.SIG(18)
[sigmove 18:04:36 DEBUG] transformed V323Ma.SPC -> V323MA.SPC
[sigmove 18:04:36 DEBUG] transformed V323Mb.SPC -> V323MB.SPC
[sigmove 18:04:36 DEBUG] transformed V323Mc.SPC -> V323MC.SPC
[sigmove 18:04:36 DEBUG] transformed V323Md.SPC -> V323MD.SPC
[sigmove 18:04:36 DEBUG] transformed V323Me.SPC -> V323ME.SPC
[sigmove 18:04:36 DEBUG] transformed V323Mf.SPC -> V323MF.SPC
[Status 18:04:36 INFO] data for V323 transferred to science data processing
[Tidy 18:04:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:04:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:04:36 INFO] resetting WatchDogTimer
[Status 18:04:36 INFO] Starting Set [AERI set: name W323, 6 scans, 0 angle, D16300 command]
[Ingest 18:04:36 INFO] Sending XML status message
[Status 18:04:36 INFO] Mirror angle: 0
[Mirror 18:04:37 INFO] rotating to position W
[Status 18:04:37 INFO] .SET file for ACQ96 ready
[Ingest 18:04:38 INFO] Starting acquisition
[Status 18:04:38 INFO] reading housekeeping
[Status 18:04:56 INFO] acquire complete
[Status 18:04:57 INFO] writing housekeeping
[Sequencer 18:04:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:04:57 INFO] incremented W scene to 323 completed views
[Sequencer 18:04:57 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:04:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:04:57 INFO] incremented to [AERI set: name X323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:04:57 INFO] W323.SIG(18)
[sigmove 18:04:57 DEBUG] transformed W323Ma.SPC -> W323MA.SPC
[sigmove 18:04:57 DEBUG] transformed W323Mb.SPC -> W323MB.SPC
[sigmove 18:04:57 DEBUG] transformed W323Mc.SPC -> W323MC.SPC
[sigmove 18:04:57 DEBUG] transformed W323Md.SPC -> W323MD.SPC
[sigmove 18:04:57 DEBUG] transformed W323Me.SPC -> W323ME.SPC
[sigmove 18:04:57 DEBUG] transformed W323Mf.SPC -> W323MF.SPC
[Status 18:04:57 INFO] data for W323 transferred to science data processing
[Tidy 18:04:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:04:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:04:57 INFO] resetting WatchDogTimer
[Status 18:04:58 INFO] Starting Set [AERI set: name X323, 6 scans, 0 angle, D16300 command]
[Ingest 18:04:58 INFO] Sending XML status message
[Status 18:04:58 INFO] Mirror angle: 0
[Mirror 18:04:58 INFO] rotating to position X
[Status 18:04:59 INFO] .SET file for ACQ96 ready
[Ingest 18:04:59 INFO] Starting acquisition
[Status 18:04:59 INFO] reading housekeeping
[Status 18:05:18 INFO] acquire complete
[Status 18:05:19 INFO] writing housekeeping
[Sequencer 18:05:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:05:19 INFO] incremented X scene to 323 completed views
[Sequencer 18:05:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:05:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:05:19 INFO] incremented to [AERI set: name Y323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:05:19 INFO] X323.SIG(18)
[sigmove 18:05:19 DEBUG] transformed X323Ma.SPC -> X323MA.SPC
[sigmove 18:05:19 DEBUG] transformed X323Mb.SPC -> X323MB.SPC
[sigmove 18:05:19 DEBUG] transformed X323Mc.SPC -> X323MC.SPC
[sigmove 18:05:19 DEBUG] transformed X323Md.SPC -> X323MD.SPC
[sigmove 18:05:19 DEBUG] transformed X323Me.SPC -> X323ME.SPC
[sigmove 18:05:19 DEBUG] transformed X323Mf.SPC -> X323MF.SPC
[Status 18:05:19 INFO] data for X323 transferred to science data processing
[Tidy 18:05:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:05:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:05:19 INFO] resetting WatchDogTimer
[Status 18:05:19 INFO] Starting Set [AERI set: name Y323, 6 scans, 0 angle, D16300 command]
[Ingest 18:05:19 INFO] Sending XML status message
[Status 18:05:19 INFO] Mirror angle: 0
[Mirror 18:05:20 INFO] rotating to position Y
[Status 18:05:20 INFO] .SET file for ACQ96 ready
[Ingest 18:05:20 INFO] Starting acquisition
[Status 18:05:21 INFO] reading housekeeping
[Status 18:05:39 INFO] acquire complete
[Status 18:05:40 INFO] writing housekeeping
[Sequencer 18:05:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:05:40 INFO] incremented Y scene to 323 completed views
[Sequencer 18:05:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:05:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:05:40 INFO] incremented to [AERI set: name Z323, 6 scans, 0 angle, D16300 command] set
[sigmove 18:05:40 INFO] Y323.SIG(18)
[sigmove 18:05:40 DEBUG] transformed Y323Ma.SPC -> Y323MA.SPC
[sigmove 18:05:40 DEBUG] transformed Y323Mb.SPC -> Y323MB.SPC
[sigmove 18:05:40 DEBUG] transformed Y323Mc.SPC -> Y323MC.SPC
[sigmove 18:05:40 DEBUG] transformed Y323Md.SPC -> Y323MD.SPC
[sigmove 18:05:40 DEBUG] transformed Y323Me.SPC -> Y323ME.SPC
[sigmove 18:05:40 DEBUG] transformed Y323Mf.SPC -> Y323MF.SPC
[Status 18:05:40 INFO] data for Y323 transferred to science data processing
[Tidy 18:05:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:05:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:05:40 INFO] resetting WatchDogTimer
[Status 18:05:40 INFO] Starting Set [AERI set: name Z323, 6 scans, 0 angle, D16300 command]
[Ingest 18:05:40 INFO] Sending XML status message
[Status 18:05:40 INFO] Mirror angle: 0
[Mirror 18:05:41 INFO] rotating to position Z
[Status 18:05:41 INFO] .SET file for ACQ96 ready
[Ingest 18:05:42 INFO] Starting acquisition
[Status 18:05:42 INFO] reading housekeeping
[Status 18:06:00 INFO] acquire complete
[Status 18:06:01 INFO] writing housekeeping
[Sequencer 18:06:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:06:01 INFO] incremented Z scene to 323 completed views
[Sequencer 18:06:01 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:06:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:06:01 INFO] incremented to [AERI set: name A324, 6 scans, 120 angle, D28300 command] set
[sigmove 18:06:01 INFO] Z323.SIG(18)
[sigmove 18:06:01 DEBUG] transformed Z323Ma.SPC -> Z323MA.SPC
[sigmove 18:06:01 DEBUG] transformed Z323Mb.SPC -> Z323MB.SPC
[sigmove 18:06:01 DEBUG] transformed Z323Mc.SPC -> Z323MC.SPC
[sigmove 18:06:01 DEBUG] transformed Z323Md.SPC -> Z323MD.SPC
[sigmove 18:06:01 DEBUG] transformed Z323Me.SPC -> Z323ME.SPC
[sigmove 18:06:01 DEBUG] transformed Z323Mf.SPC -> Z323MF.SPC
[Status 18:06:01 INFO] data for Z323 transferred to science data processing
[Tidy 18:06:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:06:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:06:01 INFO] resetting WatchDogTimer
[Status 18:06:02 INFO] Starting Set [AERI set: name A324, 6 scans, 120 angle, D28300 command]
[Ingest 18:06:02 INFO] Sending XML status message
[Status 18:06:02 INFO] Mirror angle: 120
[Mirror 18:06:02 INFO] rotating to position A
[Status 18:06:04 INFO] .SET file for ACQ96 ready
[Ingest 18:06:04 INFO] Starting acquisition
[Status 18:06:04 INFO] reading housekeeping
[Status 18:06:22 INFO] acquire complete
[Status 18:06:23 INFO] writing housekeeping
[Sequencer 18:06:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:06:23 INFO] incremented A scene to 324 completed views
[Sequencer 18:06:23 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:06:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:06:23 INFO] incremented to [AERI set: name H324, 6 scans, 60 angle, D22500 command] set
[sigmove 18:06:23 INFO] A324.SIG(18)
[sigmove 18:06:23 DEBUG] transformed A324Ma.SPC -> A324MA.SPC
[sigmove 18:06:23 DEBUG] transformed A324Mb.SPC -> A324MB.SPC
[sigmove 18:06:23 DEBUG] transformed A324Mc.SPC -> A324MC.SPC
[sigmove 18:06:23 DEBUG] transformed A324Md.SPC -> A324MD.SPC
[sigmove 18:06:23 DEBUG] transformed A324Me.SPC -> A324ME.SPC
[sigmove 18:06:23 DEBUG] transformed A324Mf.SPC -> A324MF.SPC
[Status 18:06:23 INFO] data for A324 transferred to science data processing
[Tidy 18:06:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:06:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:06:23 INFO] resetting WatchDogTimer
[Status 18:06:23 INFO] Starting Set [AERI set: name H324, 6 scans, 60 angle, D22500 command]
[Ingest 18:06:23 INFO] Sending XML status message
[Status 18:06:23 INFO] Mirror angle: 60
[Mirror 18:06:23 INFO] rotating to position H
[Status 18:06:24 INFO] .SET file for ACQ96 ready
[Ingest 18:06:25 INFO] Starting acquisition
[Status 18:06:25 INFO] reading housekeeping
[Status 18:06:43 INFO] acquire complete
[Status 18:06:44 INFO] writing housekeeping
[Sequencer 18:06:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:06:44 INFO] incremented H scene to 324 completed views
[Sequencer 18:06:44 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:06:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:06:44 INFO] incremented to [AERI set: name S324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:06:44 INFO] H324.SIG(18)
[sigmove 18:06:44 DEBUG] transformed H324Ma.SPC -> H324MA.SPC
[sigmove 18:06:44 DEBUG] transformed H324Mb.SPC -> H324MB.SPC
[sigmove 18:06:44 DEBUG] transformed H324Mc.SPC -> H324MC.SPC
[sigmove 18:06:44 DEBUG] transformed H324Md.SPC -> H324MD.SPC
[sigmove 18:06:44 DEBUG] transformed H324Me.SPC -> H324ME.SPC
[sigmove 18:06:44 DEBUG] transformed H324Mf.SPC -> H324MF.SPC
[Status 18:06:44 INFO] data for H324 transferred to science data processing
[Tidy 18:06:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:06:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:06:44 INFO] resetting WatchDogTimer
[Status 18:06:44 INFO] Starting Set [AERI set: name S324, 6 scans, 0 angle, D16300 command]
[Ingest 18:06:44 INFO] Sending XML status message
[Status 18:06:44 INFO] Mirror angle: 0
[Mirror 18:06:45 INFO] rotating to position S
[Status 18:06:46 INFO] .SET file for ACQ96 ready
[Ingest 18:06:46 INFO] Starting acquisition
[Status 18:06:47 INFO] reading housekeeping
[Status 18:07:04 INFO] acquire complete
[Status 18:07:05 INFO] writing housekeeping
[Sequencer 18:07:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:07:05 INFO] incremented S scene to 324 completed views
[Sequencer 18:07:05 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:07:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:07:05 INFO] incremented to [AERI set: name T324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:07:05 INFO] S324.SIG(18)
[sigmove 18:07:05 DEBUG] transformed S324Ma.SPC -> S324MA.SPC
[sigmove 18:07:05 DEBUG] transformed S324Mb.SPC -> S324MB.SPC
[sigmove 18:07:05 DEBUG] transformed S324Mc.SPC -> S324MC.SPC
[sigmove 18:07:05 DEBUG] transformed S324Md.SPC -> S324MD.SPC
[sigmove 18:07:05 DEBUG] transformed S324Me.SPC -> S324ME.SPC
[sigmove 18:07:05 DEBUG] transformed S324Mf.SPC -> S324MF.SPC
[Status 18:07:05 INFO] data for S324 transferred to science data processing
[Tidy 18:07:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:07:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:07:05 INFO] resetting WatchDogTimer
[Status 18:07:06 INFO] Starting Set [AERI set: name T324, 6 scans, 0 angle, D16300 command]
[Ingest 18:07:06 INFO] Sending XML status message
[Status 18:07:06 INFO] Mirror angle: 0
[Mirror 18:07:06 INFO] rotating to position T
[Status 18:07:07 INFO] .SET file for ACQ96 ready
[Ingest 18:07:07 INFO] Starting acquisition
[Status 18:07:07 INFO] reading housekeeping
[Status 18:07:25 INFO] acquire complete
[Status 18:07:27 INFO] writing housekeeping
[Sequencer 18:07:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:07:27 INFO] incremented T scene to 324 completed views
[Sequencer 18:07:27 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:07:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:07:27 INFO] incremented to [AERI set: name U324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:07:27 INFO] T324.SIG(18)
[sigmove 18:07:27 DEBUG] transformed T324Ma.SPC -> T324MA.SPC
[sigmove 18:07:27 DEBUG] transformed T324Mb.SPC -> T324MB.SPC
[sigmove 18:07:27 DEBUG] transformed T324Mc.SPC -> T324MC.SPC
[sigmove 18:07:27 DEBUG] transformed T324Md.SPC -> T324MD.SPC
[sigmove 18:07:27 DEBUG] transformed T324Me.SPC -> T324ME.SPC
[sigmove 18:07:27 DEBUG] transformed T324Mf.SPC -> T324MF.SPC
[Status 18:07:27 INFO] data for T324 transferred to science data processing
[Tidy 18:07:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:07:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:07:27 INFO] resetting WatchDogTimer
[Status 18:07:27 INFO] Starting Set [AERI set: name U324, 6 scans, 0 angle, D16300 command]
[Ingest 18:07:27 INFO] Sending XML status message
[Status 18:07:27 INFO] Mirror angle: 0
[Mirror 18:07:27 INFO] rotating to position U
[Status 18:07:28 INFO] .SET file for ACQ96 ready
[Ingest 18:07:28 INFO] Starting acquisition
[Status 18:07:29 INFO] reading housekeeping
[Status 18:07:47 INFO] acquire complete
[Status 18:07:48 INFO] writing housekeeping
[Sequencer 18:07:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:07:48 INFO] incremented U scene to 324 completed views
[Sequencer 18:07:48 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:07:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:07:48 INFO] incremented to [AERI set: name V324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:07:48 INFO] U324.SIG(18)
[sigmove 18:07:48 DEBUG] transformed U324Ma.SPC -> U324MA.SPC
[sigmove 18:07:48 DEBUG] transformed U324Mb.SPC -> U324MB.SPC
[sigmove 18:07:48 DEBUG] transformed U324Mc.SPC -> U324MC.SPC
[sigmove 18:07:48 DEBUG] transformed U324Md.SPC -> U324MD.SPC
[sigmove 18:07:48 DEBUG] transformed U324Me.SPC -> U324ME.SPC
[sigmove 18:07:48 DEBUG] transformed U324Mf.SPC -> U324MF.SPC
[Status 18:07:48 INFO] data for U324 transferred to science data processing
[Tidy 18:07:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:07:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:07:48 INFO] resetting WatchDogTimer
[Status 18:07:48 INFO] Starting Set [AERI set: name V324, 6 scans, 0 angle, D16300 command]
[Ingest 18:07:48 INFO] Sending XML status message
[Status 18:07:48 INFO] Mirror angle: 0
[Mirror 18:07:49 INFO] rotating to position V
[Status 18:07:49 INFO] .SET file for ACQ96 ready
[Ingest 18:07:50 INFO] Starting acquisition
[Status 18:07:50 INFO] reading housekeeping
[Status 18:08:08 INFO] acquire complete
[Status 18:08:09 INFO] writing housekeeping
[Sequencer 18:08:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:08:09 INFO] incremented V scene to 324 completed views
[Sequencer 18:08:09 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:08:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:08:09 INFO] incremented to [AERI set: name W324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:08:09 INFO] V324.SIG(18)
[sigmove 18:08:09 DEBUG] transformed V324Ma.SPC -> V324MA.SPC
[sigmove 18:08:09 DEBUG] transformed V324Mb.SPC -> V324MB.SPC
[sigmove 18:08:09 DEBUG] transformed V324Mc.SPC -> V324MC.SPC
[sigmove 18:08:09 DEBUG] transformed V324Md.SPC -> V324MD.SPC
[sigmove 18:08:09 DEBUG] transformed V324Me.SPC -> V324ME.SPC
[sigmove 18:08:09 DEBUG] transformed V324Mf.SPC -> V324MF.SPC
[Status 18:08:09 INFO] data for V324 transferred to science data processing
[Tidy 18:08:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:08:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:08:09 INFO] resetting WatchDogTimer
[Status 18:08:10 INFO] Starting Set [AERI set: name W324, 6 scans, 0 angle, D16300 command]
[Ingest 18:08:10 INFO] Sending XML status message
[Status 18:08:10 INFO] Mirror angle: 0
[Mirror 18:08:10 INFO] rotating to position W
[Status 18:08:11 INFO] .SET file for ACQ96 ready
[Ingest 18:08:11 INFO] Starting acquisition
[Status 18:08:11 INFO] reading housekeeping
[Status 18:08:30 INFO] acquire complete
[Status 18:08:31 INFO] writing housekeeping
[Sequencer 18:08:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:08:31 INFO] incremented W scene to 324 completed views
[Sequencer 18:08:31 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:08:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:08:31 INFO] incremented to [AERI set: name X324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:08:31 INFO] W324.SIG(18)
[sigmove 18:08:31 DEBUG] transformed W324Ma.SPC -> W324MA.SPC
[sigmove 18:08:31 DEBUG] transformed W324Mb.SPC -> W324MB.SPC
[sigmove 18:08:31 DEBUG] transformed W324Mc.SPC -> W324MC.SPC
[sigmove 18:08:31 DEBUG] transformed W324Md.SPC -> W324MD.SPC
[sigmove 18:08:31 DEBUG] transformed W324Me.SPC -> W324ME.SPC
[sigmove 18:08:31 DEBUG] transformed W324Mf.SPC -> W324MF.SPC
[Status 18:08:31 INFO] data for W324 transferred to science data processing
[Tidy 18:08:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:08:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:08:31 INFO] resetting WatchDogTimer
[Status 18:08:31 INFO] Starting Set [AERI set: name X324, 6 scans, 0 angle, D16300 command]
[Ingest 18:08:31 INFO] Sending XML status message
[Status 18:08:32 INFO] Mirror angle: 0
[Mirror 18:08:32 INFO] rotating to position X
[Status 18:08:32 INFO] .SET file for ACQ96 ready
[Ingest 18:08:33 INFO] Starting acquisition
[Status 18:08:33 INFO] reading housekeeping
[Status 18:08:51 INFO] acquire complete
[Status 18:08:52 INFO] writing housekeeping
[Sequencer 18:08:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:08:52 INFO] incremented X scene to 324 completed views
[Sequencer 18:08:52 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:08:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:08:52 INFO] incremented to [AERI set: name Y324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:08:52 INFO] X324.SIG(18)
[sigmove 18:08:52 DEBUG] transformed X324Ma.SPC -> X324MA.SPC
[sigmove 18:08:52 DEBUG] transformed X324Mb.SPC -> X324MB.SPC
[sigmove 18:08:52 DEBUG] transformed X324Mc.SPC -> X324MC.SPC
[sigmove 18:08:52 DEBUG] transformed X324Md.SPC -> X324MD.SPC
[sigmove 18:08:52 DEBUG] transformed X324Me.SPC -> X324ME.SPC
[sigmove 18:08:52 DEBUG] transformed X324Mf.SPC -> X324MF.SPC
[Status 18:08:52 INFO] data for X324 transferred to science data processing
[Tidy 18:08:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:08:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:08:52 INFO] resetting WatchDogTimer
[Status 18:08:52 INFO] Starting Set [AERI set: name Y324, 6 scans, 0 angle, D16300 command]
[Ingest 18:08:52 INFO] Sending XML status message
[Status 18:08:52 INFO] Mirror angle: 0
[Mirror 18:08:53 INFO] rotating to position Y
[Status 18:08:53 INFO] .SET file for ACQ96 ready
[Ingest 18:08:53 INFO] Starting acquisition
[Status 18:08:54 INFO] reading housekeeping
[Status 18:09:12 INFO] acquire complete
[Status 18:09:13 INFO] writing housekeeping
[Sequencer 18:09:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:09:13 INFO] incremented Y scene to 324 completed views
[Sequencer 18:09:13 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:09:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:09:13 INFO] incremented to [AERI set: name Z324, 6 scans, 0 angle, D16300 command] set
[sigmove 18:09:13 INFO] Y324.SIG(18)
[sigmove 18:09:13 DEBUG] transformed Y324Ma.SPC -> Y324MA.SPC
[sigmove 18:09:13 DEBUG] transformed Y324Mb.SPC -> Y324MB.SPC
[sigmove 18:09:13 DEBUG] transformed Y324Mc.SPC -> Y324MC.SPC
[sigmove 18:09:13 DEBUG] transformed Y324Md.SPC -> Y324MD.SPC
[sigmove 18:09:13 DEBUG] transformed Y324Me.SPC -> Y324ME.SPC
[sigmove 18:09:13 DEBUG] transformed Y324Mf.SPC -> Y324MF.SPC
[Status 18:09:13 INFO] data for Y324 transferred to science data processing
[Tidy 18:09:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:09:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:09:13 INFO] resetting WatchDogTimer
[Status 18:09:14 INFO] Starting Set [AERI set: name Z324, 6 scans, 0 angle, D16300 command]
[Ingest 18:09:14 INFO] Sending XML status message
[Status 18:09:14 INFO] Mirror angle: 0
[Mirror 18:09:14 INFO] rotating to position Z
[Status 18:09:14 INFO] .SET file for ACQ96 ready
[Ingest 18:09:15 INFO] Starting acquisition
[Status 18:09:15 INFO] reading housekeeping
[Status 18:09:33 INFO] acquire complete
[Status 18:09:34 INFO] writing housekeeping
[Sequencer 18:09:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:09:34 INFO] incremented Z scene to 324 completed views
[Sequencer 18:09:34 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:09:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:09:34 INFO] incremented to [AERI set: name H325, 6 scans, 60 angle, D22500 command] set
[sigmove 18:09:34 INFO] Z324.SIG(18)
[sigmove 18:09:34 DEBUG] transformed Z324Ma.SPC -> Z324MA.SPC
[sigmove 18:09:34 DEBUG] transformed Z324Mb.SPC -> Z324MB.SPC
[sigmove 18:09:34 DEBUG] transformed Z324Mc.SPC -> Z324MC.SPC
[sigmove 18:09:34 DEBUG] transformed Z324Md.SPC -> Z324MD.SPC
[sigmove 18:09:34 DEBUG] transformed Z324Me.SPC -> Z324ME.SPC
[sigmove 18:09:34 DEBUG] transformed Z324Mf.SPC -> Z324MF.SPC
[Status 18:09:34 INFO] data for Z324 transferred to science data processing
[Tidy 18:09:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:09:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:09:34 INFO] resetting WatchDogTimer
[Status 18:09:35 INFO] Starting Set [AERI set: name H325, 6 scans, 60 angle, D22500 command]
[Ingest 18:09:35 INFO] Sending XML status message
[Status 18:09:35 INFO] Mirror angle: 60
[Mirror 18:09:35 INFO] rotating to position H
[Status 18:09:36 INFO] .SET file for ACQ96 ready
[Ingest 18:09:37 INFO] Starting acquisition
[Status 18:09:37 INFO] reading housekeeping
[Status 18:09:55 INFO] acquire complete
[Status 18:09:56 INFO] writing housekeeping
[Sequencer 18:09:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:09:56 INFO] incremented H scene to 325 completed views
[Sequencer 18:09:56 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:09:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:09:56 INFO] incremented to [AERI set: name A325, 6 scans, 120 angle, D28300 command] set
[sigmove 18:09:56 INFO] H325.SIG(18)
[sigmove 18:09:56 DEBUG] transformed H325Ma.SPC -> H325MA.SPC
[sigmove 18:09:56 DEBUG] transformed H325Mb.SPC -> H325MB.SPC
[sigmove 18:09:56 DEBUG] transformed H325Mc.SPC -> H325MC.SPC
[sigmove 18:09:56 DEBUG] transformed H325Md.SPC -> H325MD.SPC
[sigmove 18:09:56 DEBUG] transformed H325Me.SPC -> H325ME.SPC
[sigmove 18:09:56 DEBUG] transformed H325Mf.SPC -> H325MF.SPC
[Status 18:09:56 INFO] data for H325 transferred to science data processing
[Tidy 18:09:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:09:56 INFO] A323.FIN(19),H323.FIN(19),S323.FIN(19),T323.FIN(19),U323.FIN(19),V323.FIN(19),W323.FIN(19),X323.FIN(19),Y323.FIN(19),Z323.FIN(19),A324.FIN(19),H324.FIN(19),S324.FIN(19),T324.FIN(19),U324.FIN(19),V324.FIN(19),W324.FIN(19),X324.FIN(19),Y324.FIN(19),Z324.FIN(19)
[sigmove 18:09:56 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:09:56 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:10:01 DEBUG] done zipping
[WatchDog 18:10:02 INFO] resetting WatchDogTimer
[Status 18:10:02 INFO] Starting Set [AERI set: name A325, 6 scans, 120 angle, D28300 command]
[Ingest 18:10:02 INFO] Sending XML status message
[Status 18:10:02 INFO] Mirror angle: 120
[Mirror 18:10:02 INFO] rotating to position A
[Status 18:10:03 INFO] .SET file for ACQ96 ready
[Ingest 18:10:04 INFO] Starting acquisition
[Status 18:10:04 INFO] reading housekeeping
[Status 18:10:22 INFO] acquire complete
[Status 18:10:23 INFO] writing housekeeping
[Sequencer 18:10:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:10:23 INFO] incremented A scene to 325 completed views
[Sequencer 18:10:23 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:10:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:10:23 INFO] incremented to [AERI set: name S325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:10:23 INFO] A325.SIG(18)
[sigmove 18:10:23 DEBUG] transformed A325Ma.SPC -> A325MA.SPC
[sigmove 18:10:23 DEBUG] transformed A325Mb.SPC -> A325MB.SPC
[sigmove 18:10:23 DEBUG] transformed A325Mc.SPC -> A325MC.SPC
[sigmove 18:10:23 DEBUG] transformed A325Md.SPC -> A325MD.SPC
[sigmove 18:10:23 DEBUG] transformed A325Me.SPC -> A325ME.SPC
[sigmove 18:10:23 DEBUG] transformed A325Mf.SPC -> A325MF.SPC
[Status 18:10:23 INFO] data for A325 transferred to science data processing
[Tidy 18:10:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:10:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:10:23 INFO] resetting WatchDogTimer
[Status 18:10:23 INFO] Starting Set [AERI set: name S325, 6 scans, 0 angle, D16300 command]
[Ingest 18:10:23 INFO] Sending XML status message
[Status 18:10:23 INFO] Mirror angle: 0
[Mirror 18:10:23 INFO] rotating to position S
[Status 18:10:25 INFO] .SET file for ACQ96 ready
[Ingest 18:10:25 INFO] Starting acquisition
[Status 18:10:26 INFO] reading housekeeping
[Status 18:10:43 INFO] acquire complete
[Status 18:10:44 INFO] writing housekeeping
[Sequencer 18:10:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:10:44 INFO] incremented S scene to 325 completed views
[Sequencer 18:10:44 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:10:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:10:44 INFO] incremented to [AERI set: name T325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:10:44 INFO] S325.SIG(18)
[sigmove 18:10:44 DEBUG] transformed S325Ma.SPC -> S325MA.SPC
[sigmove 18:10:44 DEBUG] transformed S325Mb.SPC -> S325MB.SPC
[sigmove 18:10:44 DEBUG] transformed S325Mc.SPC -> S325MC.SPC
[sigmove 18:10:44 DEBUG] transformed S325Md.SPC -> S325MD.SPC
[sigmove 18:10:44 DEBUG] transformed S325Me.SPC -> S325ME.SPC
[sigmove 18:10:44 DEBUG] transformed S325Mf.SPC -> S325MF.SPC
[Status 18:10:44 INFO] data for S325 transferred to science data processing
[Tidy 18:10:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:10:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:10:44 INFO] resetting WatchDogTimer
[Status 18:10:44 INFO] Starting Set [AERI set: name T325, 6 scans, 0 angle, D16300 command]
[Ingest 18:10:44 INFO] Sending XML status message
[Status 18:10:44 INFO] Mirror angle: 0
[Mirror 18:10:45 INFO] rotating to position T
[Status 18:10:45 INFO] .SET file for ACQ96 ready
[Ingest 18:10:46 INFO] Starting acquisition
[Status 18:10:46 INFO] reading housekeeping
[Status 18:11:04 INFO] acquire complete
[Status 18:11:06 INFO] writing housekeeping
[Sequencer 18:11:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:11:06 INFO] incremented T scene to 325 completed views
[Sequencer 18:11:06 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:11:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:11:06 INFO] incremented to [AERI set: name U325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:11:06 INFO] T325.SIG(18)
[sigmove 18:11:06 DEBUG] transformed T325Ma.SPC -> T325MA.SPC
[sigmove 18:11:06 DEBUG] transformed T325Mb.SPC -> T325MB.SPC
[sigmove 18:11:06 DEBUG] transformed T325Mc.SPC -> T325MC.SPC
[sigmove 18:11:06 DEBUG] transformed T325Md.SPC -> T325MD.SPC
[sigmove 18:11:06 DEBUG] transformed T325Me.SPC -> T325ME.SPC
[sigmove 18:11:06 DEBUG] transformed T325Mf.SPC -> T325MF.SPC
[Status 18:11:06 INFO] data for T325 transferred to science data processing
[Tidy 18:11:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:11:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:11:06 INFO] resetting WatchDogTimer
[Status 18:11:06 INFO] Starting Set [AERI set: name U325, 6 scans, 0 angle, D16300 command]
[Ingest 18:11:06 INFO] Sending XML status message
[Status 18:11:06 INFO] Mirror angle: 0
[Mirror 18:11:06 INFO] rotating to position U
[Status 18:11:07 INFO] .SET file for ACQ96 ready
[Ingest 18:11:07 INFO] Starting acquisition
[Status 18:11:08 INFO] reading housekeeping
[Status 18:11:25 INFO] acquire complete
[Status 18:11:27 INFO] writing housekeeping
[Sequencer 18:11:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:11:27 INFO] incremented U scene to 325 completed views
[Sequencer 18:11:27 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:11:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:11:27 INFO] incremented to [AERI set: name V325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:11:27 INFO] U325.SIG(18)
[sigmove 18:11:27 DEBUG] transformed U325Ma.SPC -> U325MA.SPC
[sigmove 18:11:27 DEBUG] transformed U325Mb.SPC -> U325MB.SPC
[sigmove 18:11:27 DEBUG] transformed U325Mc.SPC -> U325MC.SPC
[sigmove 18:11:27 DEBUG] transformed U325Md.SPC -> U325MD.SPC
[sigmove 18:11:27 DEBUG] transformed U325Me.SPC -> U325ME.SPC
[sigmove 18:11:27 DEBUG] transformed U325Mf.SPC -> U325MF.SPC
[Status 18:11:27 INFO] data for U325 transferred to science data processing
[Tidy 18:11:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:11:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:11:27 INFO] resetting WatchDogTimer
[Status 18:11:27 INFO] Starting Set [AERI set: name V325, 6 scans, 0 angle, D16300 command]
[Ingest 18:11:27 INFO] Sending XML status message
[Status 18:11:27 INFO] Mirror angle: 0
[Mirror 18:11:27 INFO] rotating to position V
[Status 18:11:28 INFO] .SET file for ACQ96 ready
[Ingest 18:11:28 INFO] Starting acquisition
[Status 18:11:29 INFO] reading housekeeping
[Status 18:11:47 INFO] acquire complete
[Status 18:11:48 INFO] writing housekeeping
[Sequencer 18:11:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:11:48 INFO] incremented V scene to 325 completed views
[Sequencer 18:11:48 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:11:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:11:48 INFO] incremented to [AERI set: name W325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:11:48 INFO] V325.SIG(18)
[sigmove 18:11:48 DEBUG] transformed V325Ma.SPC -> V325MA.SPC
[sigmove 18:11:48 DEBUG] transformed V325Mb.SPC -> V325MB.SPC
[sigmove 18:11:48 DEBUG] transformed V325Mc.SPC -> V325MC.SPC
[sigmove 18:11:48 DEBUG] transformed V325Md.SPC -> V325MD.SPC
[sigmove 18:11:48 DEBUG] transformed V325Me.SPC -> V325ME.SPC
[sigmove 18:11:48 DEBUG] transformed V325Mf.SPC -> V325MF.SPC
[Status 18:11:48 INFO] data for V325 transferred to science data processing
[Tidy 18:11:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:11:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:11:48 INFO] resetting WatchDogTimer
[Status 18:11:48 INFO] Starting Set [AERI set: name W325, 6 scans, 0 angle, D16300 command]
[Ingest 18:11:48 INFO] Sending XML status message
[Status 18:11:48 INFO] Mirror angle: 0
[Mirror 18:11:49 INFO] rotating to position W
[Status 18:11:49 INFO] .SET file for ACQ96 ready
[Ingest 18:11:49 INFO] Starting acquisition
[Status 18:11:50 INFO] reading housekeeping
[Status 18:12:08 INFO] acquire complete
[Status 18:12:09 INFO] writing housekeeping
[Sequencer 18:12:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:12:09 INFO] incremented W scene to 325 completed views
[Sequencer 18:12:09 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:12:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:12:09 INFO] incremented to [AERI set: name X325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:12:09 INFO] W325.SIG(18)
[sigmove 18:12:09 DEBUG] transformed W325Ma.SPC -> W325MA.SPC
[sigmove 18:12:09 DEBUG] transformed W325Mb.SPC -> W325MB.SPC
[sigmove 18:12:09 DEBUG] transformed W325Mc.SPC -> W325MC.SPC
[sigmove 18:12:09 DEBUG] transformed W325Md.SPC -> W325MD.SPC
[sigmove 18:12:09 DEBUG] transformed W325Me.SPC -> W325ME.SPC
[sigmove 18:12:09 DEBUG] transformed W325Mf.SPC -> W325MF.SPC
[Status 18:12:09 INFO] data for W325 transferred to science data processing
[Tidy 18:12:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:12:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:12:09 INFO] resetting WatchDogTimer
[Status 18:12:10 INFO] Starting Set [AERI set: name X325, 6 scans, 0 angle, D16300 command]
[Ingest 18:12:10 INFO] Sending XML status message
[Status 18:12:10 INFO] Mirror angle: 0
[Mirror 18:12:10 INFO] rotating to position X
[Status 18:12:10 INFO] .SET file for ACQ96 ready
[Ingest 18:12:11 INFO] Starting acquisition
[Status 18:12:11 INFO] reading housekeeping
[Status 18:12:29 INFO] acquire complete
[Status 18:12:30 INFO] writing housekeeping
[Sequencer 18:12:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:12:30 INFO] incremented X scene to 325 completed views
[Sequencer 18:12:30 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:12:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:12:30 INFO] incremented to [AERI set: name Y325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:12:30 INFO] X325.SIG(18)
[sigmove 18:12:30 DEBUG] transformed X325Ma.SPC -> X325MA.SPC
[sigmove 18:12:30 DEBUG] transformed X325Mb.SPC -> X325MB.SPC
[sigmove 18:12:30 DEBUG] transformed X325Mc.SPC -> X325MC.SPC
[sigmove 18:12:30 DEBUG] transformed X325Md.SPC -> X325MD.SPC
[sigmove 18:12:30 DEBUG] transformed X325Me.SPC -> X325ME.SPC
[sigmove 18:12:30 DEBUG] transformed X325Mf.SPC -> X325MF.SPC
[Status 18:12:30 INFO] data for X325 transferred to science data processing
[Tidy 18:12:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:12:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:12:30 INFO] resetting WatchDogTimer
[Status 18:12:31 INFO] Starting Set [AERI set: name Y325, 6 scans, 0 angle, D16300 command]
[Ingest 18:12:31 INFO] Sending XML status message
[Status 18:12:31 INFO] Mirror angle: 0
[Mirror 18:12:31 INFO] rotating to position Y
[Status 18:12:32 INFO] .SET file for ACQ96 ready
[Ingest 18:12:32 INFO] Starting acquisition
[Status 18:12:32 INFO] reading housekeeping
[Status 18:12:51 INFO] acquire complete
[Status 18:12:52 INFO] writing housekeeping
[Sequencer 18:12:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:12:52 INFO] incremented Y scene to 325 completed views
[Sequencer 18:12:52 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:12:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:12:52 INFO] incremented to [AERI set: name Z325, 6 scans, 0 angle, D16300 command] set
[sigmove 18:12:52 INFO] Y325.SIG(18)
[sigmove 18:12:52 DEBUG] transformed Y325Ma.SPC -> Y325MA.SPC
[sigmove 18:12:52 DEBUG] transformed Y325Mb.SPC -> Y325MB.SPC
[sigmove 18:12:52 DEBUG] transformed Y325Mc.SPC -> Y325MC.SPC
[sigmove 18:12:52 DEBUG] transformed Y325Md.SPC -> Y325MD.SPC
[sigmove 18:12:52 DEBUG] transformed Y325Me.SPC -> Y325ME.SPC
[sigmove 18:12:52 DEBUG] transformed Y325Mf.SPC -> Y325MF.SPC
[Status 18:12:52 INFO] data for Y325 transferred to science data processing
[Tidy 18:12:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:12:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:12:52 INFO] resetting WatchDogTimer
[Status 18:12:52 INFO] Starting Set [AERI set: name Z325, 6 scans, 0 angle, D16300 command]
[Ingest 18:12:52 INFO] Sending XML status message
[Status 18:12:52 INFO] Mirror angle: 0
[Mirror 18:12:53 INFO] rotating to position Z
[Status 18:12:53 INFO] .SET file for ACQ96 ready
[Ingest 18:12:53 INFO] Starting acquisition
[Status 18:12:54 INFO] reading housekeeping
[Status 18:13:12 INFO] acquire complete
[Status 18:13:13 INFO] writing housekeeping
[Sequencer 18:13:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:13:13 INFO] incremented Z scene to 325 completed views
[Sequencer 18:13:13 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:13:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:13:13 INFO] incremented to [AERI set: name A326, 6 scans, 120 angle, D28300 command] set
[sigmove 18:13:13 INFO] Z325.SIG(18)
[sigmove 18:13:13 DEBUG] transformed Z325Ma.SPC -> Z325MA.SPC
[sigmove 18:13:13 DEBUG] transformed Z325Mb.SPC -> Z325MB.SPC
[sigmove 18:13:13 DEBUG] transformed Z325Mc.SPC -> Z325MC.SPC
[sigmove 18:13:13 DEBUG] transformed Z325Md.SPC -> Z325MD.SPC
[sigmove 18:13:13 DEBUG] transformed Z325Me.SPC -> Z325ME.SPC
[sigmove 18:13:13 DEBUG] transformed Z325Mf.SPC -> Z325MF.SPC
[Status 18:13:13 INFO] data for Z325 transferred to science data processing
[Tidy 18:13:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:13:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:13:13 INFO] resetting WatchDogTimer
[Status 18:13:13 INFO] Starting Set [AERI set: name A326, 6 scans, 120 angle, D28300 command]
[Ingest 18:13:13 INFO] Sending XML status message
[Status 18:13:13 INFO] Mirror angle: 120
[Mirror 18:13:14 INFO] rotating to position A
[Status 18:13:15 INFO] .SET file for ACQ96 ready
[Ingest 18:13:16 INFO] Starting acquisition
[Status 18:13:16 INFO] reading housekeeping
[Status 18:13:33 INFO] acquire complete
[Status 18:13:34 INFO] writing housekeeping
[Sequencer 18:13:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:13:34 INFO] incremented A scene to 326 completed views
[Sequencer 18:13:34 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:13:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:13:34 INFO] incremented to [AERI set: name H326, 6 scans, 60 angle, D22500 command] set
[sigmove 18:13:34 INFO] A326.SIG(18)
[sigmove 18:13:34 DEBUG] transformed A326Ma.SPC -> A326MA.SPC
[sigmove 18:13:34 DEBUG] transformed A326Mb.SPC -> A326MB.SPC
[sigmove 18:13:34 DEBUG] transformed A326Mc.SPC -> A326MC.SPC
[sigmove 18:13:34 DEBUG] transformed A326Md.SPC -> A326MD.SPC
[sigmove 18:13:34 DEBUG] transformed A326Me.SPC -> A326ME.SPC
[sigmove 18:13:34 DEBUG] transformed A326Mf.SPC -> A326MF.SPC
[Status 18:13:34 INFO] data for A326 transferred to science data processing
[Tidy 18:13:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:13:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:13:34 INFO] resetting WatchDogTimer
[Status 18:13:35 INFO] Starting Set [AERI set: name H326, 6 scans, 60 angle, D22500 command]
[Ingest 18:13:35 INFO] Sending XML status message
[Status 18:13:35 INFO] Mirror angle: 60
[Mirror 18:13:35 INFO] rotating to position H
[Status 18:13:36 INFO] .SET file for ACQ96 ready
[Ingest 18:13:37 INFO] Starting acquisition
[Status 18:13:37 INFO] reading housekeeping
[Status 18:13:55 INFO] acquire complete
[Status 18:13:56 INFO] writing housekeeping
[Sequencer 18:13:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:13:56 INFO] incremented H scene to 326 completed views
[Sequencer 18:13:56 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:13:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:13:56 INFO] incremented to [AERI set: name S326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:13:56 INFO] H326.SIG(18)
[sigmove 18:13:56 DEBUG] transformed H326Ma.SPC -> H326MA.SPC
[sigmove 18:13:56 DEBUG] transformed H326Mb.SPC -> H326MB.SPC
[sigmove 18:13:56 DEBUG] transformed H326Mc.SPC -> H326MC.SPC
[sigmove 18:13:56 DEBUG] transformed H326Md.SPC -> H326MD.SPC
[sigmove 18:13:56 DEBUG] transformed H326Me.SPC -> H326ME.SPC
[sigmove 18:13:56 DEBUG] transformed H326Mf.SPC -> H326MF.SPC
[Status 18:13:56 INFO] data for H326 transferred to science data processing
[Tidy 18:13:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:13:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:13:56 INFO] resetting WatchDogTimer
[Status 18:13:56 INFO] Starting Set [AERI set: name S326, 6 scans, 0 angle, D16300 command]
[Ingest 18:13:56 INFO] Sending XML status message
[Status 18:13:56 INFO] Mirror angle: 0
[Mirror 18:13:56 INFO] rotating to position S
[Status 18:13:58 INFO] .SET file for ACQ96 ready
[Ingest 18:13:58 INFO] Starting acquisition
[Status 18:13:58 INFO] reading housekeeping
[Status 18:14:16 INFO] acquire complete
[Status 18:14:17 INFO] writing housekeeping
[Sequencer 18:14:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:14:17 INFO] incremented S scene to 326 completed views
[Sequencer 18:14:17 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:14:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:14:17 INFO] incremented to [AERI set: name T326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:14:17 INFO] S326.SIG(18)
[sigmove 18:14:17 DEBUG] transformed S326Ma.SPC -> S326MA.SPC
[sigmove 18:14:17 DEBUG] transformed S326Mb.SPC -> S326MB.SPC
[sigmove 18:14:17 DEBUG] transformed S326Mc.SPC -> S326MC.SPC
[sigmove 18:14:17 DEBUG] transformed S326Md.SPC -> S326MD.SPC
[sigmove 18:14:17 DEBUG] transformed S326Me.SPC -> S326ME.SPC
[sigmove 18:14:17 DEBUG] transformed S326Mf.SPC -> S326MF.SPC
[Status 18:14:17 INFO] data for S326 transferred to science data processing
[Tidy 18:14:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:14:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:14:17 INFO] resetting WatchDogTimer
[Status 18:14:17 INFO] Starting Set [AERI set: name T326, 6 scans, 0 angle, D16300 command]
[Ingest 18:14:17 INFO] Sending XML status message
[Status 18:14:17 INFO] Mirror angle: 0
[Mirror 18:14:18 INFO] rotating to position T
[Status 18:14:18 INFO] .SET file for ACQ96 ready
[Ingest 18:14:19 INFO] Starting acquisition
[Status 18:14:19 INFO] reading housekeeping
[Status 18:14:37 INFO] acquire complete
[Status 18:14:38 INFO] writing housekeeping
[Sequencer 18:14:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:14:38 INFO] incremented T scene to 326 completed views
[Sequencer 18:14:38 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:14:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:14:38 INFO] incremented to [AERI set: name U326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:14:38 INFO] T326.SIG(18)
[sigmove 18:14:38 DEBUG] transformed T326Ma.SPC -> T326MA.SPC
[sigmove 18:14:38 DEBUG] transformed T326Mb.SPC -> T326MB.SPC
[sigmove 18:14:38 DEBUG] transformed T326Mc.SPC -> T326MC.SPC
[sigmove 18:14:38 DEBUG] transformed T326Md.SPC -> T326MD.SPC
[sigmove 18:14:38 DEBUG] transformed T326Me.SPC -> T326ME.SPC
[sigmove 18:14:38 DEBUG] transformed T326Mf.SPC -> T326MF.SPC
[Status 18:14:38 INFO] data for T326 transferred to science data processing
[Tidy 18:14:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:14:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:14:38 INFO] resetting WatchDogTimer
[Status 18:14:39 INFO] Starting Set [AERI set: name U326, 6 scans, 0 angle, D16300 command]
[Ingest 18:14:39 INFO] Sending XML status message
[Status 18:14:39 INFO] Mirror angle: 0
[Mirror 18:14:39 INFO] rotating to position U
[Status 18:14:40 INFO] .SET file for ACQ96 ready
[Ingest 18:14:40 INFO] Starting acquisition
[Status 18:14:40 INFO] reading housekeeping
[Status 18:14:59 INFO] acquire complete
[Status 18:15:00 INFO] writing housekeeping
[Sequencer 18:15:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:15:00 INFO] incremented U scene to 326 completed views
[Sequencer 18:15:00 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:15:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:15:00 INFO] incremented to [AERI set: name V326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:15:00 INFO] U326.SIG(18)
[sigmove 18:15:00 DEBUG] transformed U326Ma.SPC -> U326MA.SPC
[sigmove 18:15:00 DEBUG] transformed U326Mb.SPC -> U326MB.SPC
[sigmove 18:15:00 DEBUG] transformed U326Mc.SPC -> U326MC.SPC
[sigmove 18:15:00 DEBUG] transformed U326Md.SPC -> U326MD.SPC
[sigmove 18:15:00 DEBUG] transformed U326Me.SPC -> U326ME.SPC
[sigmove 18:15:00 DEBUG] transformed U326Mf.SPC -> U326MF.SPC
[Status 18:15:00 INFO] data for U326 transferred to science data processing
[Tidy 18:15:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:15:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:15:00 INFO] resetting WatchDogTimer
[Status 18:15:00 INFO] Starting Set [AERI set: name V326, 6 scans, 0 angle, D16300 command]
[Ingest 18:15:00 INFO] Sending XML status message
[Status 18:15:00 INFO] Mirror angle: 0
[Mirror 18:15:00 INFO] rotating to position V
[Status 18:15:01 INFO] .SET file for ACQ96 ready
[Ingest 18:15:01 INFO] Starting acquisition
[Status 18:15:02 INFO] reading housekeeping
[Status 18:15:20 INFO] acquire complete
[Status 18:15:21 INFO] writing housekeeping
[Sequencer 18:15:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:15:21 INFO] incremented V scene to 326 completed views
[Sequencer 18:15:21 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:15:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:15:21 INFO] incremented to [AERI set: name W326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:15:21 INFO] V326.SIG(18)
[sigmove 18:15:21 DEBUG] transformed V326Ma.SPC -> V326MA.SPC
[sigmove 18:15:21 DEBUG] transformed V326Mb.SPC -> V326MB.SPC
[sigmove 18:15:21 DEBUG] transformed V326Mc.SPC -> V326MC.SPC
[sigmove 18:15:21 DEBUG] transformed V326Md.SPC -> V326MD.SPC
[sigmove 18:15:21 DEBUG] transformed V326Me.SPC -> V326ME.SPC
[sigmove 18:15:21 DEBUG] transformed V326Mf.SPC -> V326MF.SPC
[Status 18:15:21 INFO] data for V326 transferred to science data processing
[Tidy 18:15:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:15:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:15:21 INFO] resetting WatchDogTimer
[Status 18:15:21 INFO] Starting Set [AERI set: name W326, 6 scans, 0 angle, D16300 command]
[Ingest 18:15:21 INFO] Sending XML status message
[Status 18:15:21 INFO] Mirror angle: 0
[Mirror 18:15:22 INFO] rotating to position W
[Status 18:15:22 INFO] .SET file for ACQ96 ready
[Ingest 18:15:23 INFO] Starting acquisition
[Status 18:15:23 INFO] reading housekeeping
[Status 18:15:41 INFO] acquire complete
[Status 18:15:42 INFO] writing housekeeping
[Sequencer 18:15:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:15:42 INFO] incremented W scene to 326 completed views
[Sequencer 18:15:42 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:15:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:15:42 INFO] incremented to [AERI set: name X326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:15:42 INFO] W326.SIG(18)
[sigmove 18:15:42 DEBUG] transformed W326Ma.SPC -> W326MA.SPC
[sigmove 18:15:42 DEBUG] transformed W326Mb.SPC -> W326MB.SPC
[sigmove 18:15:42 DEBUG] transformed W326Mc.SPC -> W326MC.SPC
[sigmove 18:15:42 DEBUG] transformed W326Md.SPC -> W326MD.SPC
[sigmove 18:15:42 DEBUG] transformed W326Me.SPC -> W326ME.SPC
[sigmove 18:15:42 DEBUG] transformed W326Mf.SPC -> W326MF.SPC
[Status 18:15:42 INFO] data for W326 transferred to science data processing
[Tidy 18:15:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:15:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:15:42 INFO] resetting WatchDogTimer
[Status 18:15:43 INFO] Starting Set [AERI set: name X326, 6 scans, 0 angle, D16300 command]
[Ingest 18:15:43 INFO] Sending XML status message
[Status 18:15:43 INFO] Mirror angle: 0
[Mirror 18:15:43 INFO] rotating to position X
[Status 18:15:44 INFO] .SET file for ACQ96 ready
[Ingest 18:15:44 INFO] Starting acquisition
[Status 18:15:44 INFO] reading housekeeping
[Status 18:16:02 INFO] acquire complete
[Status 18:16:04 INFO] writing housekeeping
[Sequencer 18:16:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:16:04 INFO] incremented X scene to 326 completed views
[Sequencer 18:16:04 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:16:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:16:04 INFO] incremented to [AERI set: name Y326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:16:04 INFO] X326.SIG(18)
[sigmove 18:16:04 DEBUG] transformed X326Ma.SPC -> X326MA.SPC
[sigmove 18:16:04 DEBUG] transformed X326Mb.SPC -> X326MB.SPC
[sigmove 18:16:04 DEBUG] transformed X326Mc.SPC -> X326MC.SPC
[sigmove 18:16:04 DEBUG] transformed X326Md.SPC -> X326MD.SPC
[sigmove 18:16:04 DEBUG] transformed X326Me.SPC -> X326ME.SPC
[sigmove 18:16:04 DEBUG] transformed X326Mf.SPC -> X326MF.SPC
[Status 18:16:04 INFO] data for X326 transferred to science data processing
[Tidy 18:16:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:16:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:16:04 INFO] resetting WatchDogTimer
[Status 18:16:04 INFO] Starting Set [AERI set: name Y326, 6 scans, 0 angle, D16300 command]
[Ingest 18:16:04 INFO] Sending XML status message
[Status 18:16:04 INFO] Mirror angle: 0
[Mirror 18:16:04 INFO] rotating to position Y
[Status 18:16:05 INFO] .SET file for ACQ96 ready
[Ingest 18:16:05 INFO] Starting acquisition
[Status 18:16:06 INFO] reading housekeeping
[Status 18:16:24 INFO] acquire complete
[Status 18:16:25 INFO] writing housekeeping
[Sequencer 18:16:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:16:25 INFO] incremented Y scene to 326 completed views
[Sequencer 18:16:25 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:16:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:16:25 INFO] incremented to [AERI set: name Z326, 6 scans, 0 angle, D16300 command] set
[sigmove 18:16:25 INFO] Y326.SIG(18)
[sigmove 18:16:25 DEBUG] transformed Y326Ma.SPC -> Y326MA.SPC
[sigmove 18:16:25 DEBUG] transformed Y326Mb.SPC -> Y326MB.SPC
[sigmove 18:16:25 DEBUG] transformed Y326Mc.SPC -> Y326MC.SPC
[sigmove 18:16:25 DEBUG] transformed Y326Md.SPC -> Y326MD.SPC
[sigmove 18:16:25 DEBUG] transformed Y326Me.SPC -> Y326ME.SPC
[sigmove 18:16:25 DEBUG] transformed Y326Mf.SPC -> Y326MF.SPC
[Status 18:16:25 INFO] data for Y326 transferred to science data processing
[Tidy 18:16:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:16:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:16:25 INFO] resetting WatchDogTimer
[Status 18:16:25 INFO] Starting Set [AERI set: name Z326, 6 scans, 0 angle, D16300 command]
[Ingest 18:16:25 INFO] Sending XML status message
[Status 18:16:25 INFO] Mirror angle: 0
[Mirror 18:16:26 INFO] rotating to position Z
[Status 18:16:26 INFO] .SET file for ACQ96 ready
[Ingest 18:16:27 INFO] Starting acquisition
[Status 18:16:27 INFO] reading housekeeping
[Status 18:16:45 INFO] acquire complete
[Status 18:16:46 INFO] writing housekeeping
[Sequencer 18:16:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:16:46 INFO] incremented Z scene to 326 completed views
[Sequencer 18:16:46 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:16:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:16:46 INFO] incremented to [AERI set: name H327, 6 scans, 60 angle, D22500 command] set
[sigmove 18:16:46 INFO] Z326.SIG(18)
[sigmove 18:16:46 DEBUG] transformed Z326Ma.SPC -> Z326MA.SPC
[sigmove 18:16:46 DEBUG] transformed Z326Mb.SPC -> Z326MB.SPC
[sigmove 18:16:46 DEBUG] transformed Z326Mc.SPC -> Z326MC.SPC
[sigmove 18:16:46 DEBUG] transformed Z326Md.SPC -> Z326MD.SPC
[sigmove 18:16:46 DEBUG] transformed Z326Me.SPC -> Z326ME.SPC
[sigmove 18:16:46 DEBUG] transformed Z326Mf.SPC -> Z326MF.SPC
[Status 18:16:46 INFO] data for Z326 transferred to science data processing
[Tidy 18:16:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:16:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:16:46 INFO] resetting WatchDogTimer
[Status 18:16:47 INFO] Starting Set [AERI set: name H327, 6 scans, 60 angle, D22500 command]
[Ingest 18:16:47 INFO] Sending XML status message
[Status 18:16:47 INFO] Mirror angle: 60
[Mirror 18:16:47 INFO] rotating to position H
[Status 18:16:48 INFO] .SET file for ACQ96 ready
[Ingest 18:16:48 INFO] Starting acquisition
[Status 18:16:49 INFO] reading housekeeping
[Status 18:17:06 INFO] acquire complete
[Status 18:17:07 INFO] writing housekeeping
[Sequencer 18:17:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:17:07 INFO] incremented H scene to 327 completed views
[Sequencer 18:17:07 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:17:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:17:07 INFO] incremented to [AERI set: name A327, 6 scans, 120 angle, D28300 command] set
[sigmove 18:17:07 INFO] H327.SIG(18)
[sigmove 18:17:07 DEBUG] transformed H327Ma.SPC -> H327MA.SPC
[sigmove 18:17:07 DEBUG] transformed H327Mb.SPC -> H327MB.SPC
[sigmove 18:17:07 DEBUG] transformed H327Mc.SPC -> H327MC.SPC
[sigmove 18:17:07 DEBUG] transformed H327Md.SPC -> H327MD.SPC
[sigmove 18:17:07 DEBUG] transformed H327Me.SPC -> H327ME.SPC
[sigmove 18:17:07 DEBUG] transformed H327Mf.SPC -> H327MF.SPC
[Status 18:17:07 INFO] data for H327 transferred to science data processing
[Tidy 18:17:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:17:08 INFO] A325.FIN(19),H325.FIN(19),S325.FIN(19),T325.FIN(19),U325.FIN(19),V325.FIN(19),W325.FIN(19),X325.FIN(19),Y325.FIN(19),Z325.FIN(19),A326.FIN(19),H326.FIN(19),S326.FIN(19),T326.FIN(19),U326.FIN(19),V326.FIN(19),W326.FIN(19),X326.FIN(19),Y326.FIN(19),Z326.FIN(19)
[sigmove 18:17:08 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:17:08 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:17:13 DEBUG] done zipping
[WatchDog 18:17:14 INFO] resetting WatchDogTimer
[Status 18:17:14 INFO] Starting Set [AERI set: name A327, 6 scans, 120 angle, D28300 command]
[Ingest 18:17:14 INFO] Sending XML status message
[Status 18:17:14 INFO] Mirror angle: 120
[Mirror 18:17:15 INFO] rotating to position A
[Status 18:17:16 INFO] .SET file for ACQ96 ready
[Ingest 18:17:16 INFO] Starting acquisition
[Status 18:17:16 INFO] reading housekeeping
[Status 18:17:34 INFO] acquire complete
[Status 18:17:35 INFO] writing housekeeping
[Sequencer 18:17:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:17:35 INFO] incremented A scene to 327 completed views
[Sequencer 18:17:35 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:17:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:17:35 INFO] incremented to [AERI set: name S327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:17:35 INFO] A327.SIG(18)
[sigmove 18:17:35 DEBUG] transformed A327Ma.SPC -> A327MA.SPC
[sigmove 18:17:36 DEBUG] transformed A327Mb.SPC -> A327MB.SPC
[sigmove 18:17:36 DEBUG] transformed A327Mc.SPC -> A327MC.SPC
[sigmove 18:17:36 DEBUG] transformed A327Md.SPC -> A327MD.SPC
[sigmove 18:17:36 DEBUG] transformed A327Me.SPC -> A327ME.SPC
[sigmove 18:17:36 DEBUG] transformed A327Mf.SPC -> A327MF.SPC
[Status 18:17:36 INFO] data for A327 transferred to science data processing
[Tidy 18:17:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:17:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:17:36 INFO] resetting WatchDogTimer
[Status 18:17:36 INFO] Starting Set [AERI set: name S327, 6 scans, 0 angle, D16300 command]
[Ingest 18:17:36 INFO] Sending XML status message
[Status 18:17:36 INFO] Mirror angle: 0
[Mirror 18:17:36 INFO] rotating to position S
[Status 18:17:38 INFO] .SET file for ACQ96 ready
[Ingest 18:17:38 INFO] Starting acquisition
[Status 18:17:39 INFO] reading housekeeping
[Status 18:17:56 INFO] acquire complete
[Status 18:17:57 INFO] writing housekeeping
[Sequencer 18:17:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:17:57 INFO] incremented S scene to 327 completed views
[Sequencer 18:17:57 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:17:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:17:57 INFO] incremented to [AERI set: name T327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:17:57 INFO] S327.SIG(18)
[sigmove 18:17:57 DEBUG] transformed S327Ma.SPC -> S327MA.SPC
[sigmove 18:17:57 DEBUG] transformed S327Mb.SPC -> S327MB.SPC
[sigmove 18:17:57 DEBUG] transformed S327Mc.SPC -> S327MC.SPC
[sigmove 18:17:57 DEBUG] transformed S327Md.SPC -> S327MD.SPC
[sigmove 18:17:57 DEBUG] transformed S327Me.SPC -> S327ME.SPC
[sigmove 18:17:57 DEBUG] transformed S327Mf.SPC -> S327MF.SPC
[Status 18:17:57 INFO] data for S327 transferred to science data processing
[Tidy 18:17:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:17:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:17:57 INFO] resetting WatchDogTimer
[Status 18:17:57 INFO] Starting Set [AERI set: name T327, 6 scans, 0 angle, D16300 command]
[Ingest 18:17:57 INFO] Sending XML status message
[Status 18:17:57 INFO] Mirror angle: 0
[Mirror 18:17:58 INFO] rotating to position T
[Status 18:17:58 INFO] .SET file for ACQ96 ready
[Ingest 18:17:59 INFO] Starting acquisition
[Status 18:17:59 INFO] reading housekeeping
[Status 18:18:17 INFO] acquire complete
[Status 18:18:18 INFO] writing housekeeping
[Sequencer 18:18:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:18:18 INFO] incremented T scene to 327 completed views
[Sequencer 18:18:18 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:18:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:18:18 INFO] incremented to [AERI set: name U327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:18:18 INFO] T327.SIG(18)
[sigmove 18:18:18 DEBUG] transformed T327Ma.SPC -> T327MA.SPC
[sigmove 18:18:18 DEBUG] transformed T327Mb.SPC -> T327MB.SPC
[sigmove 18:18:18 DEBUG] transformed T327Mc.SPC -> T327MC.SPC
[sigmove 18:18:18 DEBUG] transformed T327Md.SPC -> T327MD.SPC
[sigmove 18:18:18 DEBUG] transformed T327Me.SPC -> T327ME.SPC
[sigmove 18:18:18 DEBUG] transformed T327Mf.SPC -> T327MF.SPC
[Status 18:18:18 INFO] data for T327 transferred to science data processing
[Tidy 18:18:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:18:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:18:18 INFO] resetting WatchDogTimer
[Status 18:18:19 INFO] Starting Set [AERI set: name U327, 6 scans, 0 angle, D16300 command]
[Ingest 18:18:19 INFO] Sending XML status message
[Status 18:18:19 INFO] Mirror angle: 0
[Mirror 18:18:19 INFO] rotating to position U
[Status 18:18:19 INFO] .SET file for ACQ96 ready
[Ingest 18:18:20 INFO] Starting acquisition
[Status 18:18:20 INFO] reading housekeeping
[Status 18:18:38 INFO] acquire complete
[Status 18:18:39 INFO] writing housekeeping
[Sequencer 18:18:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:18:39 INFO] incremented U scene to 327 completed views
[Sequencer 18:18:39 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:18:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:18:39 INFO] incremented to [AERI set: name V327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:18:39 INFO] U327.SIG(18)
[sigmove 18:18:39 DEBUG] transformed U327Ma.SPC -> U327MA.SPC
[sigmove 18:18:39 DEBUG] transformed U327Mb.SPC -> U327MB.SPC
[sigmove 18:18:39 DEBUG] transformed U327Mc.SPC -> U327MC.SPC
[sigmove 18:18:39 DEBUG] transformed U327Md.SPC -> U327MD.SPC
[sigmove 18:18:39 DEBUG] transformed U327Me.SPC -> U327ME.SPC
[sigmove 18:18:39 DEBUG] transformed U327Mf.SPC -> U327MF.SPC
[Status 18:18:39 INFO] data for U327 transferred to science data processing
[Tidy 18:18:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:18:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:18:39 INFO] resetting WatchDogTimer
[Status 18:18:40 INFO] Starting Set [AERI set: name V327, 6 scans, 0 angle, D16300 command]
[Ingest 18:18:40 INFO] Sending XML status message
[Status 18:18:40 INFO] Mirror angle: 0
[Mirror 18:18:40 INFO] rotating to position V
[Status 18:18:41 INFO] .SET file for ACQ96 ready
[Ingest 18:18:41 INFO] Starting acquisition
[Status 18:18:42 INFO] reading housekeeping
[Status 18:19:00 INFO] acquire complete
[Status 18:19:01 INFO] writing housekeeping
[Sequencer 18:19:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:19:01 INFO] incremented V scene to 327 completed views
[Sequencer 18:19:01 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:19:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:19:01 INFO] incremented to [AERI set: name W327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:19:01 INFO] V327.SIG(18)
[sigmove 18:19:01 DEBUG] transformed V327Ma.SPC -> V327MA.SPC
[sigmove 18:19:01 DEBUG] transformed V327Mb.SPC -> V327MB.SPC
[sigmove 18:19:01 DEBUG] transformed V327Mc.SPC -> V327MC.SPC
[sigmove 18:19:01 DEBUG] transformed V327Md.SPC -> V327MD.SPC
[sigmove 18:19:01 DEBUG] transformed V327Me.SPC -> V327ME.SPC
[sigmove 18:19:01 DEBUG] transformed V327Mf.SPC -> V327MF.SPC
[Status 18:19:01 INFO] data for V327 transferred to science data processing
[Tidy 18:19:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:19:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:19:01 INFO] resetting WatchDogTimer
[Status 18:19:01 INFO] Starting Set [AERI set: name W327, 6 scans, 0 angle, D16300 command]
[Ingest 18:19:01 INFO] Sending XML status message
[Status 18:19:01 INFO] Mirror angle: 0
[Mirror 18:19:02 INFO] rotating to position W
[Status 18:19:02 INFO] .SET file for ACQ96 ready
[Ingest 18:19:03 INFO] Starting acquisition
[Status 18:19:03 INFO] reading housekeeping
[Status 18:19:21 INFO] acquire complete
[Status 18:19:22 INFO] writing housekeeping
[Sequencer 18:19:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:19:22 INFO] incremented W scene to 327 completed views
[Sequencer 18:19:22 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:19:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:19:22 INFO] incremented to [AERI set: name X327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:19:22 INFO] W327.SIG(18)
[sigmove 18:19:22 DEBUG] transformed W327Ma.SPC -> W327MA.SPC
[sigmove 18:19:22 DEBUG] transformed W327Mb.SPC -> W327MB.SPC
[sigmove 18:19:22 DEBUG] transformed W327Mc.SPC -> W327MC.SPC
[sigmove 18:19:22 DEBUG] transformed W327Md.SPC -> W327MD.SPC
[sigmove 18:19:22 DEBUG] transformed W327Me.SPC -> W327ME.SPC
[sigmove 18:19:22 DEBUG] transformed W327Mf.SPC -> W327MF.SPC
[Status 18:19:22 INFO] data for W327 transferred to science data processing
[Tidy 18:19:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:19:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:19:22 INFO] resetting WatchDogTimer
[Status 18:19:22 INFO] Starting Set [AERI set: name X327, 6 scans, 0 angle, D16300 command]
[Ingest 18:19:22 INFO] Sending XML status message
[Status 18:19:22 INFO] Mirror angle: 0
[Mirror 18:19:23 INFO] rotating to position X
[Status 18:19:23 INFO] .SET file for ACQ96 ready
[Ingest 18:19:24 INFO] Starting acquisition
[Status 18:19:24 INFO] reading housekeeping
[Status 18:19:42 INFO] acquire complete
[Status 18:19:43 INFO] writing housekeeping
[Sequencer 18:19:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:19:43 INFO] incremented X scene to 327 completed views
[Sequencer 18:19:43 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:19:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:19:43 INFO] incremented to [AERI set: name Y327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:19:43 INFO] X327.SIG(18)
[sigmove 18:19:43 DEBUG] transformed X327Ma.SPC -> X327MA.SPC
[sigmove 18:19:43 DEBUG] transformed X327Mb.SPC -> X327MB.SPC
[sigmove 18:19:43 DEBUG] transformed X327Mc.SPC -> X327MC.SPC
[sigmove 18:19:43 DEBUG] transformed X327Md.SPC -> X327MD.SPC
[sigmove 18:19:43 DEBUG] transformed X327Me.SPC -> X327ME.SPC
[sigmove 18:19:43 DEBUG] transformed X327Mf.SPC -> X327MF.SPC
[Status 18:19:43 INFO] data for X327 transferred to science data processing
[Tidy 18:19:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:19:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:19:43 INFO] resetting WatchDogTimer
[Status 18:19:44 INFO] Starting Set [AERI set: name Y327, 6 scans, 0 angle, D16300 command]
[Ingest 18:19:44 INFO] Sending XML status message
[Status 18:19:44 INFO] Mirror angle: 0
[Mirror 18:19:44 INFO] rotating to position Y
[Status 18:19:45 INFO] .SET file for ACQ96 ready
[Ingest 18:19:45 INFO] Starting acquisition
[Status 18:19:46 INFO] reading housekeeping
[Status 18:20:04 INFO] acquire complete
[Status 18:20:05 INFO] writing housekeeping
[Sequencer 18:20:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:20:05 INFO] incremented Y scene to 327 completed views
[Sequencer 18:20:05 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:20:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:20:05 INFO] incremented to [AERI set: name Z327, 6 scans, 0 angle, D16300 command] set
[sigmove 18:20:05 INFO] Y327.SIG(18)
[sigmove 18:20:05 DEBUG] transformed Y327Ma.SPC -> Y327MA.SPC
[sigmove 18:20:05 DEBUG] transformed Y327Mb.SPC -> Y327MB.SPC
[sigmove 18:20:05 DEBUG] transformed Y327Mc.SPC -> Y327MC.SPC
[sigmove 18:20:05 DEBUG] transformed Y327Md.SPC -> Y327MD.SPC
[sigmove 18:20:05 DEBUG] transformed Y327Me.SPC -> Y327ME.SPC
[sigmove 18:20:05 DEBUG] transformed Y327Mf.SPC -> Y327MF.SPC
[Status 18:20:05 INFO] data for Y327 transferred to science data processing
[Tidy 18:20:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:20:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:20:05 INFO] resetting WatchDogTimer
[Status 18:20:05 INFO] Starting Set [AERI set: name Z327, 6 scans, 0 angle, D16300 command]
[Ingest 18:20:05 INFO] Sending XML status message
[Status 18:20:05 INFO] Mirror angle: 0
[Mirror 18:20:06 INFO] rotating to position Z
[Status 18:20:06 INFO] .SET file for ACQ96 ready
[Ingest 18:20:06 INFO] Starting acquisition
[Status 18:20:07 INFO] reading housekeeping
[Status 18:20:25 INFO] acquire complete
[Status 18:20:26 INFO] writing housekeeping
[Sequencer 18:20:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:20:26 INFO] incremented Z scene to 327 completed views
[Sequencer 18:20:26 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:20:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:20:26 INFO] incremented to [AERI set: name A328, 6 scans, 120 angle, D28300 command] set
[sigmove 18:20:26 INFO] Z327.SIG(18)
[sigmove 18:20:26 DEBUG] transformed Z327Ma.SPC -> Z327MA.SPC
[sigmove 18:20:26 DEBUG] transformed Z327Mb.SPC -> Z327MB.SPC
[sigmove 18:20:26 DEBUG] transformed Z327Mc.SPC -> Z327MC.SPC
[sigmove 18:20:26 DEBUG] transformed Z327Md.SPC -> Z327MD.SPC
[sigmove 18:20:26 DEBUG] transformed Z327Me.SPC -> Z327ME.SPC
[sigmove 18:20:26 DEBUG] transformed Z327Mf.SPC -> Z327MF.SPC
[Status 18:20:26 INFO] data for Z327 transferred to science data processing
[Tidy 18:20:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:20:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:20:26 INFO] resetting WatchDogTimer
[Status 18:20:26 INFO] Starting Set [AERI set: name A328, 6 scans, 120 angle, D28300 command]
[Ingest 18:20:26 INFO] Sending XML status message
[Status 18:20:26 INFO] Mirror angle: 120
[Mirror 18:20:27 INFO] rotating to position A
[Status 18:20:28 INFO] .SET file for ACQ96 ready
[Ingest 18:20:29 INFO] Starting acquisition
[Status 18:20:29 INFO] reading housekeeping
[Status 18:20:46 INFO] acquire complete
[Status 18:20:47 INFO] writing housekeeping
[Sequencer 18:20:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:20:47 INFO] incremented A scene to 328 completed views
[Sequencer 18:20:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:20:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:20:47 INFO] incremented to [AERI set: name H328, 6 scans, 60 angle, D22500 command] set
[sigmove 18:20:47 INFO] A328.SIG(18)
[sigmove 18:20:47 DEBUG] transformed A328Ma.SPC -> A328MA.SPC
[sigmove 18:20:47 DEBUG] transformed A328Mb.SPC -> A328MB.SPC
[sigmove 18:20:47 DEBUG] transformed A328Mc.SPC -> A328MC.SPC
[sigmove 18:20:47 DEBUG] transformed A328Md.SPC -> A328MD.SPC
[sigmove 18:20:47 DEBUG] transformed A328Me.SPC -> A328ME.SPC
[sigmove 18:20:47 DEBUG] transformed A328Mf.SPC -> A328MF.SPC
[Status 18:20:47 INFO] data for A328 transferred to science data processing
[Tidy 18:20:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:20:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:20:47 INFO] resetting WatchDogTimer
[Status 18:20:48 INFO] Starting Set [AERI set: name H328, 6 scans, 60 angle, D22500 command]
[Ingest 18:20:48 INFO] Sending XML status message
[Status 18:20:48 INFO] Mirror angle: 60
[Mirror 18:20:48 INFO] rotating to position H
[Status 18:20:49 INFO] .SET file for ACQ96 ready
[Ingest 18:20:49 INFO] Starting acquisition
[Status 18:20:50 INFO] reading housekeeping
[Status 18:21:08 INFO] acquire complete
[Status 18:21:09 INFO] writing housekeeping
[Sequencer 18:21:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:21:09 INFO] incremented H scene to 328 completed views
[Sequencer 18:21:09 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:21:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:21:09 INFO] incremented to [AERI set: name S328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:21:09 INFO] H328.SIG(18)
[sigmove 18:21:09 DEBUG] transformed H328Ma.SPC -> H328MA.SPC
[sigmove 18:21:09 DEBUG] transformed H328Mb.SPC -> H328MB.SPC
[sigmove 18:21:09 DEBUG] transformed H328Mc.SPC -> H328MC.SPC
[sigmove 18:21:09 DEBUG] transformed H328Md.SPC -> H328MD.SPC
[sigmove 18:21:09 DEBUG] transformed H328Me.SPC -> H328ME.SPC
[sigmove 18:21:09 DEBUG] transformed H328Mf.SPC -> H328MF.SPC
[Status 18:21:09 INFO] data for H328 transferred to science data processing
[Tidy 18:21:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:21:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:21:09 INFO] resetting WatchDogTimer
[Status 18:21:09 INFO] Starting Set [AERI set: name S328, 6 scans, 0 angle, D16300 command]
[Ingest 18:21:09 INFO] Sending XML status message
[Status 18:21:09 INFO] Mirror angle: 0
[Mirror 18:21:09 INFO] rotating to position S
[Status 18:21:10 INFO] .SET file for ACQ96 ready
[Ingest 18:21:11 INFO] Starting acquisition
[Status 18:21:11 INFO] reading housekeeping
[Status 18:21:29 INFO] acquire complete
[Status 18:21:30 INFO] writing housekeeping
[Sequencer 18:21:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:21:30 INFO] incremented S scene to 328 completed views
[Sequencer 18:21:30 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:21:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:21:30 INFO] incremented to [AERI set: name T328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:21:30 INFO] S328.SIG(18)
[sigmove 18:21:30 DEBUG] transformed S328Ma.SPC -> S328MA.SPC
[sigmove 18:21:30 DEBUG] transformed S328Mb.SPC -> S328MB.SPC
[sigmove 18:21:30 DEBUG] transformed S328Mc.SPC -> S328MC.SPC
[sigmove 18:21:30 DEBUG] transformed S328Md.SPC -> S328MD.SPC
[sigmove 18:21:30 DEBUG] transformed S328Me.SPC -> S328ME.SPC
[sigmove 18:21:30 DEBUG] transformed S328Mf.SPC -> S328MF.SPC
[Status 18:21:30 INFO] data for S328 transferred to science data processing
[Tidy 18:21:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:21:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:21:30 INFO] resetting WatchDogTimer
[Status 18:21:30 INFO] Starting Set [AERI set: name T328, 6 scans, 0 angle, D16300 command]
[Ingest 18:21:30 INFO] Sending XML status message
[Status 18:21:30 INFO] Mirror angle: 0
[Mirror 18:21:31 INFO] rotating to position T
[Status 18:21:31 INFO] .SET file for ACQ96 ready
[Ingest 18:21:32 INFO] Starting acquisition
[Status 18:21:32 INFO] reading housekeeping
[Status 18:21:50 INFO] acquire complete
[Status 18:21:51 INFO] writing housekeeping
[Sequencer 18:21:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:21:51 INFO] incremented T scene to 328 completed views
[Sequencer 18:21:51 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:21:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:21:51 INFO] incremented to [AERI set: name U328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:21:51 INFO] T328.SIG(18)
[sigmove 18:21:51 DEBUG] transformed T328Ma.SPC -> T328MA.SPC
[sigmove 18:21:51 DEBUG] transformed T328Mb.SPC -> T328MB.SPC
[sigmove 18:21:51 DEBUG] transformed T328Mc.SPC -> T328MC.SPC
[sigmove 18:21:51 DEBUG] transformed T328Md.SPC -> T328MD.SPC
[sigmove 18:21:51 DEBUG] transformed T328Me.SPC -> T328ME.SPC
[sigmove 18:21:51 DEBUG] transformed T328Mf.SPC -> T328MF.SPC
[Status 18:21:51 INFO] data for T328 transferred to science data processing
[Tidy 18:21:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:21:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:21:51 INFO] resetting WatchDogTimer
[Status 18:21:52 INFO] Starting Set [AERI set: name U328, 6 scans, 0 angle, D16300 command]
[Ingest 18:21:52 INFO] Sending XML status message
[Status 18:21:52 INFO] Mirror angle: 0
[Mirror 18:21:52 INFO] rotating to position U
[Status 18:21:53 INFO] .SET file for ACQ96 ready
[Ingest 18:21:53 INFO] Starting acquisition
[Status 18:21:53 INFO] reading housekeeping
[Status 18:22:11 INFO] acquire complete
[Status 18:22:12 INFO] writing housekeeping
[Sequencer 18:22:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:22:12 INFO] incremented U scene to 328 completed views
[Sequencer 18:22:12 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:22:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:22:13 INFO] incremented to [AERI set: name V328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:22:13 INFO] U328.SIG(18)
[sigmove 18:22:13 DEBUG] transformed U328Ma.SPC -> U328MA.SPC
[sigmove 18:22:13 DEBUG] transformed U328Mb.SPC -> U328MB.SPC
[sigmove 18:22:13 DEBUG] transformed U328Mc.SPC -> U328MC.SPC
[sigmove 18:22:13 DEBUG] transformed U328Md.SPC -> U328MD.SPC
[sigmove 18:22:13 DEBUG] transformed U328Me.SPC -> U328ME.SPC
[sigmove 18:22:13 DEBUG] transformed U328Mf.SPC -> U328MF.SPC
[Status 18:22:13 INFO] data for U328 transferred to science data processing
[Tidy 18:22:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:22:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:22:13 INFO] resetting WatchDogTimer
[Status 18:22:13 INFO] Starting Set [AERI set: name V328, 6 scans, 0 angle, D16300 command]
[Ingest 18:22:13 INFO] Sending XML status message
[Status 18:22:13 INFO] Mirror angle: 0
[Mirror 18:22:13 INFO] rotating to position V
[Status 18:22:14 INFO] .SET file for ACQ96 ready
[Ingest 18:22:14 INFO] Starting acquisition
[Status 18:22:15 INFO] reading housekeeping
[Status 18:22:33 INFO] acquire complete
[Status 18:22:34 INFO] writing housekeeping
[Sequencer 18:22:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:22:34 INFO] incremented V scene to 328 completed views
[Sequencer 18:22:34 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:22:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:22:34 INFO] incremented to [AERI set: name W328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:22:34 INFO] V328.SIG(18)
[sigmove 18:22:34 DEBUG] transformed V328Ma.SPC -> V328MA.SPC
[sigmove 18:22:34 DEBUG] transformed V328Mb.SPC -> V328MB.SPC
[sigmove 18:22:34 DEBUG] transformed V328Mc.SPC -> V328MC.SPC
[sigmove 18:22:34 DEBUG] transformed V328Md.SPC -> V328MD.SPC
[sigmove 18:22:34 DEBUG] transformed V328Me.SPC -> V328ME.SPC
[sigmove 18:22:34 DEBUG] transformed V328Mf.SPC -> V328MF.SPC
[Status 18:22:34 INFO] data for V328 transferred to science data processing
[Tidy 18:22:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:22:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:22:34 INFO] resetting WatchDogTimer
[Status 18:22:34 INFO] Starting Set [AERI set: name W328, 6 scans, 0 angle, D16300 command]
[Ingest 18:22:34 INFO] Sending XML status message
[Status 18:22:34 INFO] Mirror angle: 0
[Mirror 18:22:35 INFO] rotating to position W
[Status 18:22:35 INFO] .SET file for ACQ96 ready
[Ingest 18:22:35 INFO] Starting acquisition
[Status 18:22:36 INFO] reading housekeeping
[Status 18:22:54 INFO] acquire complete
[Status 18:22:55 INFO] writing housekeeping
[Sequencer 18:22:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:22:55 INFO] incremented W scene to 328 completed views
[Sequencer 18:22:55 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:22:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:22:55 INFO] incremented to [AERI set: name X328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:22:55 INFO] W328.SIG(18)
[sigmove 18:22:55 DEBUG] transformed W328Ma.SPC -> W328MA.SPC
[sigmove 18:22:55 DEBUG] transformed W328Mb.SPC -> W328MB.SPC
[sigmove 18:22:55 DEBUG] transformed W328Mc.SPC -> W328MC.SPC
[sigmove 18:22:55 DEBUG] transformed W328Md.SPC -> W328MD.SPC
[sigmove 18:22:55 DEBUG] transformed W328Me.SPC -> W328ME.SPC
[sigmove 18:22:55 DEBUG] transformed W328Mf.SPC -> W328MF.SPC
[Status 18:22:55 INFO] data for W328 transferred to science data processing
[Tidy 18:22:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:22:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:22:55 INFO] resetting WatchDogTimer
[Status 18:22:56 INFO] Starting Set [AERI set: name X328, 6 scans, 0 angle, D16300 command]
[Ingest 18:22:56 INFO] Sending XML status message
[Status 18:22:56 INFO] Mirror angle: 0
[Mirror 18:22:56 INFO] rotating to position X
[Status 18:22:56 INFO] .SET file for ACQ96 ready
[Ingest 18:22:57 INFO] Starting acquisition
[Status 18:22:57 INFO] reading housekeeping
[Status 18:23:15 INFO] acquire complete
[Status 18:23:16 INFO] writing housekeeping
[Sequencer 18:23:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:23:16 INFO] incremented X scene to 328 completed views
[Sequencer 18:23:16 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:23:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:23:16 INFO] incremented to [AERI set: name Y328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:23:16 INFO] X328.SIG(18)
[sigmove 18:23:16 DEBUG] transformed X328Ma.SPC -> X328MA.SPC
[sigmove 18:23:16 DEBUG] transformed X328Mb.SPC -> X328MB.SPC
[sigmove 18:23:16 DEBUG] transformed X328Mc.SPC -> X328MC.SPC
[sigmove 18:23:16 DEBUG] transformed X328Md.SPC -> X328MD.SPC
[sigmove 18:23:16 DEBUG] transformed X328Me.SPC -> X328ME.SPC
[sigmove 18:23:16 DEBUG] transformed X328Mf.SPC -> X328MF.SPC
[Status 18:23:16 INFO] data for X328 transferred to science data processing
[Tidy 18:23:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:23:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:23:16 INFO] resetting WatchDogTimer
[Status 18:23:17 INFO] Starting Set [AERI set: name Y328, 6 scans, 0 angle, D16300 command]
[Ingest 18:23:17 INFO] Sending XML status message
[Status 18:23:17 INFO] Mirror angle: 0
[Mirror 18:23:17 INFO] rotating to position Y
[Status 18:23:18 INFO] .SET file for ACQ96 ready
[Ingest 18:23:18 INFO] Starting acquisition
[Status 18:23:18 INFO] reading housekeeping
[Status 18:23:37 INFO] acquire complete
[Status 18:23:38 INFO] writing housekeeping
[Sequencer 18:23:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:23:38 INFO] incremented Y scene to 328 completed views
[Sequencer 18:23:38 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:23:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:23:38 INFO] incremented to [AERI set: name Z328, 6 scans, 0 angle, D16300 command] set
[sigmove 18:23:38 INFO] Y328.SIG(18)
[sigmove 18:23:38 DEBUG] transformed Y328Ma.SPC -> Y328MA.SPC
[sigmove 18:23:38 DEBUG] transformed Y328Mb.SPC -> Y328MB.SPC
[sigmove 18:23:38 DEBUG] transformed Y328Mc.SPC -> Y328MC.SPC
[sigmove 18:23:38 DEBUG] transformed Y328Md.SPC -> Y328MD.SPC
[sigmove 18:23:38 DEBUG] transformed Y328Me.SPC -> Y328ME.SPC
[sigmove 18:23:38 DEBUG] transformed Y328Mf.SPC -> Y328MF.SPC
[Status 18:23:38 INFO] data for Y328 transferred to science data processing
[Tidy 18:23:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:23:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:23:38 INFO] resetting WatchDogTimer
[Status 18:23:38 INFO] Starting Set [AERI set: name Z328, 6 scans, 0 angle, D16300 command]
[Ingest 18:23:38 INFO] Sending XML status message
[Status 18:23:38 INFO] Mirror angle: 0
[Mirror 18:23:39 INFO] rotating to position Z
[Status 18:23:39 INFO] .SET file for ACQ96 ready
[Ingest 18:23:39 INFO] Starting acquisition
[Status 18:23:40 INFO] reading housekeeping
[Status 18:23:58 INFO] acquire complete
[Status 18:23:59 INFO] writing housekeeping
[Sequencer 18:23:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:23:59 INFO] incremented Z scene to 328 completed views
[Sequencer 18:23:59 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:23:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:23:59 INFO] incremented to [AERI set: name H329, 6 scans, 60 angle, D22500 command] set
[sigmove 18:23:59 INFO] Z328.SIG(18)
[sigmove 18:23:59 DEBUG] transformed Z328Ma.SPC -> Z328MA.SPC
[sigmove 18:23:59 DEBUG] transformed Z328Mb.SPC -> Z328MB.SPC
[sigmove 18:23:59 DEBUG] transformed Z328Mc.SPC -> Z328MC.SPC
[sigmove 18:23:59 DEBUG] transformed Z328Md.SPC -> Z328MD.SPC
[sigmove 18:23:59 DEBUG] transformed Z328Me.SPC -> Z328ME.SPC
[sigmove 18:23:59 DEBUG] transformed Z328Mf.SPC -> Z328MF.SPC
[Status 18:23:59 INFO] data for Z328 transferred to science data processing
[Tidy 18:23:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:23:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:23:59 INFO] resetting WatchDogTimer
[Status 18:23:59 INFO] Starting Set [AERI set: name H329, 6 scans, 60 angle, D22500 command]
[Ingest 18:23:59 INFO] Sending XML status message
[Status 18:23:59 INFO] Mirror angle: 60
[Mirror 18:24:00 INFO] rotating to position H
[Status 18:24:01 INFO] .SET file for ACQ96 ready
[Ingest 18:24:01 INFO] Starting acquisition
[Status 18:24:02 INFO] reading housekeeping
[Status 18:24:19 INFO] acquire complete
[Status 18:24:20 INFO] writing housekeeping
[Sequencer 18:24:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:24:20 INFO] incremented H scene to 329 completed views
[Sequencer 18:24:20 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:24:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:24:20 INFO] incremented to [AERI set: name A329, 6 scans, 120 angle, D28300 command] set
[sigmove 18:24:20 INFO] H329.SIG(18)
[sigmove 18:24:20 DEBUG] transformed H329Ma.SPC -> H329MA.SPC
[sigmove 18:24:20 DEBUG] transformed H329Mb.SPC -> H329MB.SPC
[sigmove 18:24:20 DEBUG] transformed H329Mc.SPC -> H329MC.SPC
[sigmove 18:24:20 DEBUG] transformed H329Md.SPC -> H329MD.SPC
[sigmove 18:24:20 DEBUG] transformed H329Me.SPC -> H329ME.SPC
[sigmove 18:24:20 DEBUG] transformed H329Mf.SPC -> H329MF.SPC
[Status 18:24:20 INFO] data for H329 transferred to science data processing
[Tidy 18:24:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:24:20 INFO] A327.FIN(19),H327.FIN(19),S327.FIN(19),T327.FIN(19),U327.FIN(19),V327.FIN(19),W327.FIN(19),X327.FIN(19),Y327.FIN(19),Z327.FIN(19),A328.FIN(19),H328.FIN(19),S328.FIN(19),T328.FIN(19),U328.FIN(19),V328.FIN(19),W328.FIN(19),X328.FIN(19),Y328.FIN(19),Z328.FIN(19)
[sigmove 18:24:20 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:24:20 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:24:26 DEBUG] done zipping
[WatchDog 18:24:27 INFO] resetting WatchDogTimer
[Status 18:24:27 INFO] Starting Set [AERI set: name A329, 6 scans, 120 angle, D28300 command]
[Ingest 18:24:27 INFO] Sending XML status message
[Status 18:24:27 INFO] Mirror angle: 120
[Mirror 18:24:27 INFO] rotating to position A
[Status 18:24:29 INFO] .SET file for ACQ96 ready
[Ingest 18:24:29 INFO] Starting acquisition
[Status 18:24:29 INFO] reading housekeeping
[Status 18:24:47 INFO] acquire complete
[Status 18:24:48 INFO] writing housekeeping
[Sequencer 18:24:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:24:48 INFO] incremented A scene to 329 completed views
[Sequencer 18:24:48 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:24:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:24:48 INFO] incremented to [AERI set: name S329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:24:48 INFO] A329.SIG(18)
[sigmove 18:24:48 DEBUG] transformed A329Ma.SPC -> A329MA.SPC
[sigmove 18:24:48 DEBUG] transformed A329Mb.SPC -> A329MB.SPC
[sigmove 18:24:48 DEBUG] transformed A329Mc.SPC -> A329MC.SPC
[sigmove 18:24:48 DEBUG] transformed A329Md.SPC -> A329MD.SPC
[sigmove 18:24:48 DEBUG] transformed A329Me.SPC -> A329ME.SPC
[sigmove 18:24:48 DEBUG] transformed A329Mf.SPC -> A329MF.SPC
[Status 18:24:48 INFO] data for A329 transferred to science data processing
[Tidy 18:24:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:24:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:24:48 INFO] resetting WatchDogTimer
[Status 18:24:49 INFO] Starting Set [AERI set: name S329, 6 scans, 0 angle, D16300 command]
[Ingest 18:24:49 INFO] Sending XML status message
[Status 18:24:49 INFO] Mirror angle: 0
[Mirror 18:24:49 INFO] rotating to position S
[Status 18:24:51 INFO] .SET file for ACQ96 ready
[Ingest 18:24:51 INFO] Starting acquisition
[Status 18:24:51 INFO] reading housekeeping
[Status 18:25:09 INFO] acquire complete
[Status 18:25:10 INFO] writing housekeeping
[Sequencer 18:25:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:25:10 INFO] incremented S scene to 329 completed views
[Sequencer 18:25:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:25:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:25:10 INFO] incremented to [AERI set: name T329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:25:10 INFO] S329.SIG(18)
[sigmove 18:25:10 DEBUG] transformed S329Ma.SPC -> S329MA.SPC
[sigmove 18:25:10 DEBUG] transformed S329Mb.SPC -> S329MB.SPC
[sigmove 18:25:10 DEBUG] transformed S329Mc.SPC -> S329MC.SPC
[sigmove 18:25:10 DEBUG] transformed S329Md.SPC -> S329MD.SPC
[sigmove 18:25:10 DEBUG] transformed S329Me.SPC -> S329ME.SPC
[sigmove 18:25:10 DEBUG] transformed S329Mf.SPC -> S329MF.SPC
[Status 18:25:10 INFO] data for S329 transferred to science data processing
[Tidy 18:25:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:25:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:25:10 INFO] resetting WatchDogTimer
[Status 18:25:10 INFO] Starting Set [AERI set: name T329, 6 scans, 0 angle, D16300 command]
[Ingest 18:25:10 INFO] Sending XML status message
[Status 18:25:10 INFO] Mirror angle: 0
[Mirror 18:25:11 INFO] rotating to position T
[Status 18:25:11 INFO] .SET file for ACQ96 ready
[Ingest 18:25:11 INFO] Starting acquisition
[Status 18:25:12 INFO] reading housekeeping
[Status 18:25:30 INFO] acquire complete
[Status 18:25:31 INFO] writing housekeeping
[Sequencer 18:25:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:25:31 INFO] incremented T scene to 329 completed views
[Sequencer 18:25:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:25:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:25:31 INFO] incremented to [AERI set: name U329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:25:31 INFO] T329.SIG(18)
[sigmove 18:25:31 DEBUG] transformed T329Ma.SPC -> T329MA.SPC
[sigmove 18:25:31 DEBUG] transformed T329Mb.SPC -> T329MB.SPC
[sigmove 18:25:31 DEBUG] transformed T329Mc.SPC -> T329MC.SPC
[sigmove 18:25:31 DEBUG] transformed T329Md.SPC -> T329MD.SPC
[sigmove 18:25:31 DEBUG] transformed T329Me.SPC -> T329ME.SPC
[sigmove 18:25:31 DEBUG] transformed T329Mf.SPC -> T329MF.SPC
[Status 18:25:31 INFO] data for T329 transferred to science data processing
[Tidy 18:25:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:25:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:25:31 INFO] resetting WatchDogTimer
[Status 18:25:32 INFO] Starting Set [AERI set: name U329, 6 scans, 0 angle, D16300 command]
[Ingest 18:25:32 INFO] Sending XML status message
[Status 18:25:32 INFO] Mirror angle: 0
[Mirror 18:25:32 INFO] rotating to position U
[Status 18:25:33 INFO] .SET file for ACQ96 ready
[Ingest 18:25:33 INFO] Starting acquisition
[Status 18:25:33 INFO] reading housekeeping
[Status 18:25:51 INFO] acquire complete
[Status 18:25:52 INFO] writing housekeeping
[Sequencer 18:25:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:25:52 INFO] incremented U scene to 329 completed views
[Sequencer 18:25:52 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:25:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:25:52 INFO] incremented to [AERI set: name V329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:25:52 INFO] U329.SIG(18)
[sigmove 18:25:52 DEBUG] transformed U329Ma.SPC -> U329MA.SPC
[sigmove 18:25:52 DEBUG] transformed U329Mb.SPC -> U329MB.SPC
[sigmove 18:25:52 DEBUG] transformed U329Mc.SPC -> U329MC.SPC
[sigmove 18:25:52 DEBUG] transformed U329Md.SPC -> U329MD.SPC
[sigmove 18:25:52 DEBUG] transformed U329Me.SPC -> U329ME.SPC
[sigmove 18:25:52 DEBUG] transformed U329Mf.SPC -> U329MF.SPC
[Status 18:25:52 INFO] data for U329 transferred to science data processing
[Tidy 18:25:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:25:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:25:52 INFO] resetting WatchDogTimer
[Status 18:25:53 INFO] Starting Set [AERI set: name V329, 6 scans, 0 angle, D16300 command]
[Ingest 18:25:53 INFO] Sending XML status message
[Status 18:25:53 INFO] Mirror angle: 0
[Mirror 18:25:53 INFO] rotating to position V
[Status 18:25:54 INFO] .SET file for ACQ96 ready
[Ingest 18:25:54 INFO] Starting acquisition
[Status 18:25:54 INFO] reading housekeeping
[Status 18:26:13 INFO] acquire complete
[Status 18:26:14 INFO] writing housekeeping
[Sequencer 18:26:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:26:14 INFO] incremented V scene to 329 completed views
[Sequencer 18:26:14 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:26:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:26:14 INFO] incremented to [AERI set: name W329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:26:14 INFO] V329.SIG(18)
[sigmove 18:26:14 DEBUG] transformed V329Ma.SPC -> V329MA.SPC
[sigmove 18:26:14 DEBUG] transformed V329Mb.SPC -> V329MB.SPC
[sigmove 18:26:14 DEBUG] transformed V329Mc.SPC -> V329MC.SPC
[sigmove 18:26:14 DEBUG] transformed V329Md.SPC -> V329MD.SPC
[sigmove 18:26:14 DEBUG] transformed V329Me.SPC -> V329ME.SPC
[sigmove 18:26:14 DEBUG] transformed V329Mf.SPC -> V329MF.SPC
[Status 18:26:14 INFO] data for V329 transferred to science data processing
[Tidy 18:26:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:26:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:26:14 INFO] resetting WatchDogTimer
[Status 18:26:14 INFO] Starting Set [AERI set: name W329, 6 scans, 0 angle, D16300 command]
[Ingest 18:26:14 INFO] Sending XML status message
[Status 18:26:14 INFO] Mirror angle: 0
[Mirror 18:26:14 INFO] rotating to position W
[Status 18:26:15 INFO] .SET file for ACQ96 ready
[Ingest 18:26:15 INFO] Starting acquisition
[Status 18:26:16 INFO] reading housekeeping
[Status 18:26:34 INFO] acquire complete
[Status 18:26:35 INFO] writing housekeeping
[Sequencer 18:26:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:26:35 INFO] incremented W scene to 329 completed views
[Sequencer 18:26:35 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:26:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:26:35 INFO] incremented to [AERI set: name X329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:26:35 INFO] W329.SIG(18)
[sigmove 18:26:35 DEBUG] transformed W329Ma.SPC -> W329MA.SPC
[sigmove 18:26:35 DEBUG] transformed W329Mb.SPC -> W329MB.SPC
[sigmove 18:26:35 DEBUG] transformed W329Mc.SPC -> W329MC.SPC
[sigmove 18:26:35 DEBUG] transformed W329Md.SPC -> W329MD.SPC
[sigmove 18:26:35 DEBUG] transformed W329Me.SPC -> W329ME.SPC
[sigmove 18:26:35 DEBUG] transformed W329Mf.SPC -> W329MF.SPC
[Status 18:26:35 INFO] data for W329 transferred to science data processing
[Tidy 18:26:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:26:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:26:35 INFO] resetting WatchDogTimer
[Status 18:26:35 INFO] Starting Set [AERI set: name X329, 6 scans, 0 angle, D16300 command]
[Ingest 18:26:35 INFO] Sending XML status message
[Status 18:26:35 INFO] Mirror angle: 0
[Mirror 18:26:36 INFO] rotating to position X
[Status 18:26:36 INFO] .SET file for ACQ96 ready
[Ingest 18:26:37 INFO] Starting acquisition
[Status 18:26:37 INFO] reading housekeeping
[Status 18:26:55 INFO] acquire complete
[Status 18:26:56 INFO] writing housekeeping
[Sequencer 18:26:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:26:56 INFO] incremented X scene to 329 completed views
[Sequencer 18:26:56 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:26:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:26:56 INFO] incremented to [AERI set: name Y329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:26:56 INFO] X329.SIG(18)
[sigmove 18:26:56 DEBUG] transformed X329Ma.SPC -> X329MA.SPC
[sigmove 18:26:56 DEBUG] transformed X329Mb.SPC -> X329MB.SPC
[sigmove 18:26:56 DEBUG] transformed X329Mc.SPC -> X329MC.SPC
[sigmove 18:26:56 DEBUG] transformed X329Md.SPC -> X329MD.SPC
[sigmove 18:26:56 DEBUG] transformed X329Me.SPC -> X329ME.SPC
[sigmove 18:26:56 DEBUG] transformed X329Mf.SPC -> X329MF.SPC
[Status 18:26:56 INFO] data for X329 transferred to science data processing
[Tidy 18:26:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:26:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:26:56 INFO] resetting WatchDogTimer
[Status 18:26:57 INFO] Starting Set [AERI set: name Y329, 6 scans, 0 angle, D16300 command]
[Ingest 18:26:57 INFO] Sending XML status message
[Status 18:26:57 INFO] Mirror angle: 0
[Mirror 18:26:57 INFO] rotating to position Y
[Status 18:26:58 INFO] .SET file for ACQ96 ready
[Ingest 18:26:58 INFO] Starting acquisition
[Status 18:26:58 INFO] reading housekeeping
[Status 18:27:16 INFO] acquire complete
[Status 18:27:18 INFO] writing housekeeping
[Sequencer 18:27:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:27:18 INFO] incremented Y scene to 329 completed views
[Sequencer 18:27:18 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:27:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:27:18 INFO] incremented to [AERI set: name Z329, 6 scans, 0 angle, D16300 command] set
[sigmove 18:27:18 INFO] Y329.SIG(18)
[sigmove 18:27:18 DEBUG] transformed Y329Ma.SPC -> Y329MA.SPC
[sigmove 18:27:18 DEBUG] transformed Y329Mb.SPC -> Y329MB.SPC
[sigmove 18:27:18 DEBUG] transformed Y329Mc.SPC -> Y329MC.SPC
[sigmove 18:27:18 DEBUG] transformed Y329Md.SPC -> Y329MD.SPC
[sigmove 18:27:18 DEBUG] transformed Y329Me.SPC -> Y329ME.SPC
[sigmove 18:27:18 DEBUG] transformed Y329Mf.SPC -> Y329MF.SPC
[Status 18:27:18 INFO] data for Y329 transferred to science data processing
[Tidy 18:27:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:27:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:27:18 INFO] resetting WatchDogTimer
[Status 18:27:18 INFO] Starting Set [AERI set: name Z329, 6 scans, 0 angle, D16300 command]
[Ingest 18:27:18 INFO] Sending XML status message
[Status 18:27:18 INFO] Mirror angle: 0
[Mirror 18:27:18 INFO] rotating to position Z
[Status 18:27:19 INFO] .SET file for ACQ96 ready
[Ingest 18:27:19 INFO] Starting acquisition
[Status 18:27:20 INFO] reading housekeeping
[Status 18:27:38 INFO] acquire complete
[Status 18:27:39 INFO] writing housekeeping
[Sequencer 18:27:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:27:39 INFO] incremented Z scene to 329 completed views
[Sequencer 18:27:39 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:27:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:27:39 INFO] incremented to [AERI set: name A330, 6 scans, 120 angle, D28300 command] set
[sigmove 18:27:39 INFO] Z329.SIG(18)
[sigmove 18:27:39 DEBUG] transformed Z329Ma.SPC -> Z329MA.SPC
[sigmove 18:27:39 DEBUG] transformed Z329Mb.SPC -> Z329MB.SPC
[sigmove 18:27:39 DEBUG] transformed Z329Mc.SPC -> Z329MC.SPC
[sigmove 18:27:39 DEBUG] transformed Z329Md.SPC -> Z329MD.SPC
[sigmove 18:27:39 DEBUG] transformed Z329Me.SPC -> Z329ME.SPC
[sigmove 18:27:39 DEBUG] transformed Z329Mf.SPC -> Z329MF.SPC
[Status 18:27:39 INFO] data for Z329 transferred to science data processing
[Tidy 18:27:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:27:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:27:39 INFO] resetting WatchDogTimer
[Status 18:27:39 INFO] Starting Set [AERI set: name A330, 6 scans, 120 angle, D28300 command]
[Ingest 18:27:39 INFO] Sending XML status message
[Status 18:27:39 INFO] Mirror angle: 120
[Mirror 18:27:40 INFO] rotating to position A
[Status 18:27:41 INFO] .SET file for ACQ96 ready
[Ingest 18:27:42 INFO] Starting acquisition
[Status 18:27:42 INFO] reading housekeeping
[Status 18:28:00 INFO] acquire complete
[Status 18:28:02 INFO] writing housekeeping
[Sequencer 18:28:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:28:02 INFO] incremented A scene to 330 completed views
[Sequencer 18:28:02 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:28:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:28:02 INFO] incremented to [AERI set: name H330, 6 scans, 60 angle, D22500 command] set
[sigmove 18:28:02 INFO] A330.SIG(18)
[sigmove 18:28:02 DEBUG] transformed A330Ma.SPC -> A330MA.SPC
[sigmove 18:28:02 DEBUG] transformed A330Mb.SPC -> A330MB.SPC
[sigmove 18:28:02 DEBUG] transformed A330Mc.SPC -> A330MC.SPC
[sigmove 18:28:02 DEBUG] transformed A330Md.SPC -> A330MD.SPC
[sigmove 18:28:02 DEBUG] transformed A330Me.SPC -> A330ME.SPC
[sigmove 18:28:02 DEBUG] transformed A330Mf.SPC -> A330MF.SPC
[Status 18:28:02 INFO] data for A330 transferred to science data processing
[Tidy 18:28:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:28:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:28:02 INFO] resetting WatchDogTimer
[Status 18:28:02 INFO] Starting Set [AERI set: name H330, 6 scans, 60 angle, D22500 command]
[Ingest 18:28:02 INFO] Sending XML status message
[Status 18:28:02 INFO] Mirror angle: 60
[Mirror 18:28:03 INFO] rotating to position H
[Status 18:28:04 INFO] .SET file for ACQ96 ready
[Ingest 18:28:04 INFO] Starting acquisition
[Status 18:28:04 INFO] reading housekeeping
[Status 18:28:22 INFO] acquire complete
[Status 18:28:23 INFO] writing housekeeping
[Sequencer 18:28:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:28:23 INFO] incremented H scene to 330 completed views
[Sequencer 18:28:23 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:28:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:28:23 INFO] incremented to [AERI set: name S330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:28:23 INFO] H330.SIG(18)
[sigmove 18:28:23 DEBUG] transformed H330Ma.SPC -> H330MA.SPC
[sigmove 18:28:23 DEBUG] transformed H330Mb.SPC -> H330MB.SPC
[sigmove 18:28:23 DEBUG] transformed H330Mc.SPC -> H330MC.SPC
[sigmove 18:28:23 DEBUG] transformed H330Md.SPC -> H330MD.SPC
[sigmove 18:28:23 DEBUG] transformed H330Me.SPC -> H330ME.SPC
[sigmove 18:28:23 DEBUG] transformed H330Mf.SPC -> H330MF.SPC
[Status 18:28:23 INFO] data for H330 transferred to science data processing
[Tidy 18:28:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:28:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:28:23 INFO] resetting WatchDogTimer
[Status 18:28:23 INFO] Starting Set [AERI set: name S330, 6 scans, 0 angle, D16300 command]
[Ingest 18:28:23 INFO] Sending XML status message
[Status 18:28:23 INFO] Mirror angle: 0
[Mirror 18:28:23 INFO] rotating to position S
[Status 18:28:24 INFO] .SET file for ACQ96 ready
[Ingest 18:28:25 INFO] Starting acquisition
[Status 18:28:25 INFO] reading housekeeping
[Status 18:28:43 INFO] acquire complete
[Status 18:28:44 INFO] writing housekeeping
[Sequencer 18:28:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:28:44 INFO] incremented S scene to 330 completed views
[Sequencer 18:28:44 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:28:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:28:44 INFO] incremented to [AERI set: name T330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:28:44 INFO] S330.SIG(18)
[sigmove 18:28:44 DEBUG] transformed S330Ma.SPC -> S330MA.SPC
[sigmove 18:28:44 DEBUG] transformed S330Mb.SPC -> S330MB.SPC
[sigmove 18:28:44 DEBUG] transformed S330Mc.SPC -> S330MC.SPC
[sigmove 18:28:44 DEBUG] transformed S330Md.SPC -> S330MD.SPC
[sigmove 18:28:44 DEBUG] transformed S330Me.SPC -> S330ME.SPC
[sigmove 18:28:44 DEBUG] transformed S330Mf.SPC -> S330MF.SPC
[Status 18:28:44 INFO] data for S330 transferred to science data processing
[Tidy 18:28:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:28:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:28:44 INFO] resetting WatchDogTimer
[Status 18:28:44 INFO] Starting Set [AERI set: name T330, 6 scans, 0 angle, D16300 command]
[Ingest 18:28:44 INFO] Sending XML status message
[Status 18:28:44 INFO] Mirror angle: 0
[Mirror 18:28:45 INFO] rotating to position T
[Status 18:28:45 INFO] .SET file for ACQ96 ready
[Ingest 18:28:46 INFO] Starting acquisition
[Status 18:28:46 INFO] reading housekeeping
[Status 18:29:04 INFO] acquire complete
[Status 18:29:05 INFO] writing housekeeping
[Sequencer 18:29:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:29:05 INFO] incremented T scene to 330 completed views
[Sequencer 18:29:05 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:29:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:29:05 INFO] incremented to [AERI set: name U330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:29:05 INFO] T330.SIG(18)
[sigmove 18:29:05 DEBUG] transformed T330Ma.SPC -> T330MA.SPC
[sigmove 18:29:05 DEBUG] transformed T330Mb.SPC -> T330MB.SPC
[sigmove 18:29:05 DEBUG] transformed T330Mc.SPC -> T330MC.SPC
[sigmove 18:29:05 DEBUG] transformed T330Md.SPC -> T330MD.SPC
[sigmove 18:29:05 DEBUG] transformed T330Me.SPC -> T330ME.SPC
[sigmove 18:29:05 DEBUG] transformed T330Mf.SPC -> T330MF.SPC
[Status 18:29:05 INFO] data for T330 transferred to science data processing
[Tidy 18:29:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:29:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:29:05 INFO] resetting WatchDogTimer
[Status 18:29:06 INFO] Starting Set [AERI set: name U330, 6 scans, 0 angle, D16300 command]
[Ingest 18:29:06 INFO] Sending XML status message
[Status 18:29:06 INFO] Mirror angle: 0
[Mirror 18:29:06 INFO] rotating to position U
[Status 18:29:07 INFO] .SET file for ACQ96 ready
[Ingest 18:29:07 INFO] Starting acquisition
[Status 18:29:07 INFO] reading housekeeping
[Status 18:29:25 INFO] acquire complete
[Status 18:29:27 INFO] writing housekeeping
[Sequencer 18:29:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:29:27 INFO] incremented U scene to 330 completed views
[Sequencer 18:29:27 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:29:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:29:27 INFO] incremented to [AERI set: name V330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:29:27 INFO] U330.SIG(18)
[sigmove 18:29:27 DEBUG] transformed U330Ma.SPC -> U330MA.SPC
[sigmove 18:29:27 DEBUG] transformed U330Mb.SPC -> U330MB.SPC
[sigmove 18:29:27 DEBUG] transformed U330Mc.SPC -> U330MC.SPC
[sigmove 18:29:27 DEBUG] transformed U330Md.SPC -> U330MD.SPC
[sigmove 18:29:27 DEBUG] transformed U330Me.SPC -> U330ME.SPC
[sigmove 18:29:27 DEBUG] transformed U330Mf.SPC -> U330MF.SPC
[Status 18:29:27 INFO] data for U330 transferred to science data processing
[Tidy 18:29:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:29:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:29:27 INFO] resetting WatchDogTimer
[Status 18:29:27 INFO] Starting Set [AERI set: name V330, 6 scans, 0 angle, D16300 command]
[Ingest 18:29:27 INFO] Sending XML status message
[Status 18:29:27 INFO] Mirror angle: 0
[Mirror 18:29:27 INFO] rotating to position V
[Status 18:29:28 INFO] .SET file for ACQ96 ready
[Ingest 18:29:28 INFO] Starting acquisition
[Status 18:29:29 INFO] reading housekeeping
[Status 18:29:47 INFO] acquire complete
[Status 18:29:48 INFO] writing housekeeping
[Sequencer 18:29:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:29:48 INFO] incremented V scene to 330 completed views
[Sequencer 18:29:48 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:29:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:29:48 INFO] incremented to [AERI set: name W330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:29:48 INFO] V330.SIG(18)
[sigmove 18:29:48 DEBUG] transformed V330Ma.SPC -> V330MA.SPC
[sigmove 18:29:48 DEBUG] transformed V330Mb.SPC -> V330MB.SPC
[sigmove 18:29:48 DEBUG] transformed V330Mc.SPC -> V330MC.SPC
[sigmove 18:29:48 DEBUG] transformed V330Md.SPC -> V330MD.SPC
[sigmove 18:29:48 DEBUG] transformed V330Me.SPC -> V330ME.SPC
[sigmove 18:29:48 DEBUG] transformed V330Mf.SPC -> V330MF.SPC
[Status 18:29:48 INFO] data for V330 transferred to science data processing
[Tidy 18:29:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:29:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:29:48 INFO] resetting WatchDogTimer
[Status 18:29:48 INFO] Starting Set [AERI set: name W330, 6 scans, 0 angle, D16300 command]
[Ingest 18:29:48 INFO] Sending XML status message
[Status 18:29:48 INFO] Mirror angle: 0
[Mirror 18:29:49 INFO] rotating to position W
[Status 18:29:49 INFO] .SET file for ACQ96 ready
[Ingest 18:29:50 INFO] Starting acquisition
[Status 18:29:50 INFO] reading housekeeping
[Status 18:30:08 INFO] acquire complete
[Status 18:30:09 INFO] writing housekeeping
[Sequencer 18:30:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:30:09 INFO] incremented W scene to 330 completed views
[Sequencer 18:30:09 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:30:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:30:09 INFO] incremented to [AERI set: name X330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:30:09 INFO] W330.SIG(18)
[sigmove 18:30:09 DEBUG] transformed W330Ma.SPC -> W330MA.SPC
[sigmove 18:30:09 DEBUG] transformed W330Mb.SPC -> W330MB.SPC
[sigmove 18:30:09 DEBUG] transformed W330Mc.SPC -> W330MC.SPC
[sigmove 18:30:09 DEBUG] transformed W330Md.SPC -> W330MD.SPC
[sigmove 18:30:09 DEBUG] transformed W330Me.SPC -> W330ME.SPC
[sigmove 18:30:09 DEBUG] transformed W330Mf.SPC -> W330MF.SPC
[Status 18:30:09 INFO] data for W330 transferred to science data processing
[Tidy 18:30:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:30:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:30:09 INFO] resetting WatchDogTimer
[Status 18:30:10 INFO] Starting Set [AERI set: name X330, 6 scans, 0 angle, D16300 command]
[Ingest 18:30:10 INFO] Sending XML status message
[Status 18:30:10 INFO] Mirror angle: 0
[Mirror 18:30:10 INFO] rotating to position X
[Status 18:30:10 INFO] .SET file for ACQ96 ready
[Ingest 18:30:11 INFO] Starting acquisition
[Status 18:30:11 INFO] reading housekeeping
[Status 18:30:29 INFO] acquire complete
[Status 18:30:30 INFO] writing housekeeping
[Sequencer 18:30:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:30:30 INFO] incremented X scene to 330 completed views
[Sequencer 18:30:30 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:30:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:30:30 INFO] incremented to [AERI set: name Y330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:30:30 INFO] X330.SIG(18)
[sigmove 18:30:30 DEBUG] transformed X330Ma.SPC -> X330MA.SPC
[sigmove 18:30:30 DEBUG] transformed X330Mb.SPC -> X330MB.SPC
[sigmove 18:30:30 DEBUG] transformed X330Mc.SPC -> X330MC.SPC
[sigmove 18:30:30 DEBUG] transformed X330Md.SPC -> X330MD.SPC
[sigmove 18:30:30 DEBUG] transformed X330Me.SPC -> X330ME.SPC
[sigmove 18:30:30 DEBUG] transformed X330Mf.SPC -> X330MF.SPC
[Status 18:30:30 INFO] data for X330 transferred to science data processing
[Tidy 18:30:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:30:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:30:30 INFO] resetting WatchDogTimer
[Status 18:30:31 INFO] Starting Set [AERI set: name Y330, 6 scans, 0 angle, D16300 command]
[Ingest 18:30:31 INFO] Sending XML status message
[Status 18:30:31 INFO] Mirror angle: 0
[Mirror 18:30:31 INFO] rotating to position Y
[Status 18:30:32 INFO] .SET file for ACQ96 ready
[Ingest 18:30:32 INFO] Starting acquisition
[Status 18:30:33 INFO] reading housekeeping
[Status 18:30:51 INFO] acquire complete
[Status 18:30:52 INFO] writing housekeeping
[Sequencer 18:30:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:30:52 INFO] incremented Y scene to 330 completed views
[Sequencer 18:30:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:30:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:30:52 INFO] incremented to [AERI set: name Z330, 6 scans, 0 angle, D16300 command] set
[sigmove 18:30:52 INFO] Y330.SIG(18)
[sigmove 18:30:52 DEBUG] transformed Y330Ma.SPC -> Y330MA.SPC
[sigmove 18:30:52 DEBUG] transformed Y330Mb.SPC -> Y330MB.SPC
[sigmove 18:30:52 DEBUG] transformed Y330Mc.SPC -> Y330MC.SPC
[sigmove 18:30:52 DEBUG] transformed Y330Md.SPC -> Y330MD.SPC
[sigmove 18:30:52 DEBUG] transformed Y330Me.SPC -> Y330ME.SPC
[sigmove 18:30:52 DEBUG] transformed Y330Mf.SPC -> Y330MF.SPC
[Status 18:30:52 INFO] data for Y330 transferred to science data processing
[Tidy 18:30:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:30:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:30:52 INFO] resetting WatchDogTimer
[Status 18:30:52 INFO] Starting Set [AERI set: name Z330, 6 scans, 0 angle, D16300 command]
[Ingest 18:30:52 INFO] Sending XML status message
[Status 18:30:52 INFO] Mirror angle: 0
[Mirror 18:30:53 INFO] rotating to position Z
[Status 18:30:53 INFO] .SET file for ACQ96 ready
[Ingest 18:30:53 INFO] Starting acquisition
[Status 18:30:54 INFO] reading housekeeping
[Status 18:31:12 INFO] acquire complete
[Status 18:31:13 INFO] writing housekeeping
[Sequencer 18:31:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:31:13 INFO] incremented Z scene to 330 completed views
[Sequencer 18:31:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:31:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:31:13 INFO] incremented to [AERI set: name H331, 6 scans, 60 angle, D22500 command] set
[sigmove 18:31:13 INFO] Z330.SIG(18)
[sigmove 18:31:13 DEBUG] transformed Z330Ma.SPC -> Z330MA.SPC
[sigmove 18:31:13 DEBUG] transformed Z330Mb.SPC -> Z330MB.SPC
[sigmove 18:31:13 DEBUG] transformed Z330Mc.SPC -> Z330MC.SPC
[sigmove 18:31:13 DEBUG] transformed Z330Md.SPC -> Z330MD.SPC
[sigmove 18:31:13 DEBUG] transformed Z330Me.SPC -> Z330ME.SPC
[sigmove 18:31:13 DEBUG] transformed Z330Mf.SPC -> Z330MF.SPC
[Status 18:31:13 INFO] data for Z330 transferred to science data processing
[Tidy 18:31:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:31:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:31:13 INFO] resetting WatchDogTimer
[Status 18:31:13 INFO] Starting Set [AERI set: name H331, 6 scans, 60 angle, D22500 command]
[Ingest 18:31:13 INFO] Sending XML status message
[Status 18:31:13 INFO] Mirror angle: 60
[Mirror 18:31:14 INFO] rotating to position H
[Status 18:31:15 INFO] .SET file for ACQ96 ready
[Ingest 18:31:15 INFO] Starting acquisition
[Status 18:31:16 INFO] reading housekeeping
[Status 18:31:33 INFO] acquire complete
[Status 18:31:34 INFO] writing housekeeping
[Sequencer 18:31:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:31:34 INFO] incremented H scene to 331 completed views
[Sequencer 18:31:34 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:31:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:31:34 INFO] incremented to [AERI set: name A331, 6 scans, 120 angle, D28300 command] set
[sigmove 18:31:34 INFO] H331.SIG(18)
[sigmove 18:31:34 DEBUG] transformed H331Ma.SPC -> H331MA.SPC
[sigmove 18:31:34 DEBUG] transformed H331Mb.SPC -> H331MB.SPC
[sigmove 18:31:34 DEBUG] transformed H331Mc.SPC -> H331MC.SPC
[sigmove 18:31:34 DEBUG] transformed H331Md.SPC -> H331MD.SPC
[sigmove 18:31:34 DEBUG] transformed H331Me.SPC -> H331ME.SPC
[sigmove 18:31:34 DEBUG] transformed H331Mf.SPC -> H331MF.SPC
[Status 18:31:34 INFO] data for H331 transferred to science data processing
[Tidy 18:31:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:31:34 INFO] A329.FIN(19),H329.FIN(19),S329.FIN(19),T329.FIN(19),U329.FIN(19),V329.FIN(19),W329.FIN(19),X329.FIN(19),Y329.FIN(19),Z329.FIN(19),A330.FIN(19),H330.FIN(19),S330.FIN(19),T330.FIN(19),U330.FIN(19),V330.FIN(19),W330.FIN(19),X330.FIN(19),Y330.FIN(19),Z330.FIN(19)
[sigmove 18:31:34 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:31:34 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:31:40 DEBUG] done zipping
[WatchDog 18:31:41 INFO] resetting WatchDogTimer
[Status 18:31:41 INFO] Starting Set [AERI set: name A331, 6 scans, 120 angle, D28300 command]
[Ingest 18:31:41 INFO] Sending XML status message
[Status 18:31:41 INFO] Mirror angle: 120
[Mirror 18:31:41 INFO] rotating to position A
[Status 18:31:42 INFO] .SET file for ACQ96 ready
[Ingest 18:31:43 INFO] Starting acquisition
[Status 18:31:43 INFO] reading housekeeping
[Status 18:32:01 INFO] acquire complete
[Status 18:32:02 INFO] writing housekeeping
[Sequencer 18:32:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:32:02 INFO] incremented A scene to 331 completed views
[Sequencer 18:32:02 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:32:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:32:02 INFO] incremented to [AERI set: name S331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:32:02 INFO] A331.SIG(18)
[sigmove 18:32:02 DEBUG] transformed A331Ma.SPC -> A331MA.SPC
[sigmove 18:32:02 DEBUG] transformed A331Mb.SPC -> A331MB.SPC
[sigmove 18:32:02 DEBUG] transformed A331Mc.SPC -> A331MC.SPC
[sigmove 18:32:02 DEBUG] transformed A331Md.SPC -> A331MD.SPC
[sigmove 18:32:02 DEBUG] transformed A331Me.SPC -> A331ME.SPC
[sigmove 18:32:02 DEBUG] transformed A331Mf.SPC -> A331MF.SPC
[Status 18:32:02 INFO] data for A331 transferred to science data processing
[Tidy 18:32:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:32:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:32:02 INFO] resetting WatchDogTimer
[Status 18:32:03 INFO] Starting Set [AERI set: name S331, 6 scans, 0 angle, D16300 command]
[Ingest 18:32:03 INFO] Sending XML status message
[Status 18:32:03 INFO] Mirror angle: 0
[Mirror 18:32:03 INFO] rotating to position S
[Status 18:32:05 INFO] .SET file for ACQ96 ready
[Ingest 18:32:05 INFO] Starting acquisition
[Status 18:32:06 INFO] reading housekeeping
[Status 18:32:24 INFO] acquire complete
[Status 18:32:25 INFO] writing housekeeping
[Sequencer 18:32:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:32:25 INFO] incremented S scene to 331 completed views
[Sequencer 18:32:25 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:32:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:32:25 INFO] incremented to [AERI set: name T331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:32:25 INFO] S331.SIG(18)
[sigmove 18:32:25 DEBUG] transformed S331Ma.SPC -> S331MA.SPC
[sigmove 18:32:25 DEBUG] transformed S331Mb.SPC -> S331MB.SPC
[sigmove 18:32:25 DEBUG] transformed S331Mc.SPC -> S331MC.SPC
[sigmove 18:32:25 DEBUG] transformed S331Md.SPC -> S331MD.SPC
[sigmove 18:32:25 DEBUG] transformed S331Me.SPC -> S331ME.SPC
[sigmove 18:32:25 DEBUG] transformed S331Mf.SPC -> S331MF.SPC
[Status 18:32:25 INFO] data for S331 transferred to science data processing
[Tidy 18:32:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:32:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:32:25 INFO] resetting WatchDogTimer
[Status 18:32:25 INFO] Starting Set [AERI set: name T331, 6 scans, 0 angle, D16300 command]
[Ingest 18:32:25 INFO] Sending XML status message
[Status 18:32:25 INFO] Mirror angle: 0
[Mirror 18:32:26 INFO] rotating to position T
[Status 18:32:26 INFO] .SET file for ACQ96 ready
[Ingest 18:32:27 INFO] Starting acquisition
[Status 18:32:27 INFO] reading housekeeping
[Status 18:32:45 INFO] acquire complete
[Status 18:32:46 INFO] writing housekeeping
[Sequencer 18:32:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:32:46 INFO] incremented T scene to 331 completed views
[Sequencer 18:32:46 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:32:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:32:46 INFO] incremented to [AERI set: name U331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:32:46 INFO] T331.SIG(18)
[sigmove 18:32:46 DEBUG] transformed T331Ma.SPC -> T331MA.SPC
[sigmove 18:32:46 DEBUG] transformed T331Mb.SPC -> T331MB.SPC
[sigmove 18:32:46 DEBUG] transformed T331Mc.SPC -> T331MC.SPC
[sigmove 18:32:46 DEBUG] transformed T331Md.SPC -> T331MD.SPC
[sigmove 18:32:46 DEBUG] transformed T331Me.SPC -> T331ME.SPC
[sigmove 18:32:46 DEBUG] transformed T331Mf.SPC -> T331MF.SPC
[Status 18:32:46 INFO] data for T331 transferred to science data processing
[Tidy 18:32:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:32:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:32:46 INFO] resetting WatchDogTimer
[Status 18:32:47 INFO] Starting Set [AERI set: name U331, 6 scans, 0 angle, D16300 command]
[Ingest 18:32:47 INFO] Sending XML status message
[Status 18:32:47 INFO] Mirror angle: 0
[Mirror 18:32:47 INFO] rotating to position U
[Status 18:32:47 INFO] .SET file for ACQ96 ready
[Ingest 18:32:48 INFO] Starting acquisition
[Status 18:32:48 INFO] reading housekeeping
[Status 18:33:06 INFO] acquire complete
[Status 18:33:07 INFO] writing housekeeping
[Sequencer 18:33:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:33:07 INFO] incremented U scene to 331 completed views
[Sequencer 18:33:07 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:33:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:33:07 INFO] incremented to [AERI set: name V331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:33:07 INFO] U331.SIG(18)
[sigmove 18:33:07 DEBUG] transformed U331Ma.SPC -> U331MA.SPC
[sigmove 18:33:07 DEBUG] transformed U331Mb.SPC -> U331MB.SPC
[sigmove 18:33:07 DEBUG] transformed U331Mc.SPC -> U331MC.SPC
[sigmove 18:33:07 DEBUG] transformed U331Md.SPC -> U331MD.SPC
[sigmove 18:33:07 DEBUG] transformed U331Me.SPC -> U331ME.SPC
[sigmove 18:33:07 DEBUG] transformed U331Mf.SPC -> U331MF.SPC
[Status 18:33:07 INFO] data for U331 transferred to science data processing
[Tidy 18:33:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:33:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:33:07 INFO] resetting WatchDogTimer
[Status 18:33:08 INFO] Starting Set [AERI set: name V331, 6 scans, 0 angle, D16300 command]
[Ingest 18:33:08 INFO] Sending XML status message
[Status 18:33:08 INFO] Mirror angle: 0
[Mirror 18:33:08 INFO] rotating to position V
[Status 18:33:09 INFO] .SET file for ACQ96 ready
[Ingest 18:33:09 INFO] Starting acquisition
[Status 18:33:10 INFO] reading housekeeping
[Status 18:33:28 INFO] acquire complete
[Status 18:33:29 INFO] writing housekeeping
[Sequencer 18:33:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:33:29 INFO] incremented V scene to 331 completed views
[Sequencer 18:33:29 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:33:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:33:29 INFO] incremented to [AERI set: name W331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:33:29 INFO] V331.SIG(18)
[sigmove 18:33:29 DEBUG] transformed V331Ma.SPC -> V331MA.SPC
[sigmove 18:33:29 DEBUG] transformed V331Mb.SPC -> V331MB.SPC
[sigmove 18:33:29 DEBUG] transformed V331Mc.SPC -> V331MC.SPC
[sigmove 18:33:29 DEBUG] transformed V331Md.SPC -> V331MD.SPC
[sigmove 18:33:29 DEBUG] transformed V331Me.SPC -> V331ME.SPC
[sigmove 18:33:29 DEBUG] transformed V331Mf.SPC -> V331MF.SPC
[Status 18:33:29 INFO] data for V331 transferred to science data processing
[Tidy 18:33:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:33:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:33:29 INFO] resetting WatchDogTimer
[Status 18:33:29 INFO] Starting Set [AERI set: name W331, 6 scans, 0 angle, D16300 command]
[Ingest 18:33:29 INFO] Sending XML status message
[Status 18:33:29 INFO] Mirror angle: 0
[Mirror 18:33:30 INFO] rotating to position W
[Status 18:33:30 INFO] .SET file for ACQ96 ready
[Ingest 18:33:30 INFO] Starting acquisition
[Status 18:33:31 INFO] reading housekeeping
[Status 18:33:49 INFO] acquire complete
[Status 18:33:50 INFO] writing housekeeping
[Sequencer 18:33:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:33:50 INFO] incremented W scene to 331 completed views
[Sequencer 18:33:50 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:33:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:33:50 INFO] incremented to [AERI set: name X331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:33:50 INFO] W331.SIG(18)
[sigmove 18:33:50 DEBUG] transformed W331Ma.SPC -> W331MA.SPC
[sigmove 18:33:50 DEBUG] transformed W331Mb.SPC -> W331MB.SPC
[sigmove 18:33:50 DEBUG] transformed W331Mc.SPC -> W331MC.SPC
[sigmove 18:33:50 DEBUG] transformed W331Md.SPC -> W331MD.SPC
[sigmove 18:33:50 DEBUG] transformed W331Me.SPC -> W331ME.SPC
[sigmove 18:33:50 DEBUG] transformed W331Mf.SPC -> W331MF.SPC
[Status 18:33:50 INFO] data for W331 transferred to science data processing
[Tidy 18:33:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:33:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:33:50 INFO] resetting WatchDogTimer
[Status 18:33:50 INFO] Starting Set [AERI set: name X331, 6 scans, 0 angle, D16300 command]
[Ingest 18:33:50 INFO] Sending XML status message
[Status 18:33:50 INFO] Mirror angle: 0
[Mirror 18:33:51 INFO] rotating to position X
[Status 18:33:51 INFO] .SET file for ACQ96 ready
[Ingest 18:33:52 INFO] Starting acquisition
[Status 18:33:52 INFO] reading housekeeping
[Status 18:34:10 INFO] acquire complete
[Status 18:34:11 INFO] writing housekeeping
[Sequencer 18:34:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:34:11 INFO] incremented X scene to 331 completed views
[Sequencer 18:34:11 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:34:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:34:11 INFO] incremented to [AERI set: name Y331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:34:11 INFO] X331.SIG(18)
[sigmove 18:34:11 DEBUG] transformed X331Ma.SPC -> X331MA.SPC
[sigmove 18:34:11 DEBUG] transformed X331Mb.SPC -> X331MB.SPC
[sigmove 18:34:11 DEBUG] transformed X331Mc.SPC -> X331MC.SPC
[sigmove 18:34:11 DEBUG] transformed X331Md.SPC -> X331MD.SPC
[sigmove 18:34:11 DEBUG] transformed X331Me.SPC -> X331ME.SPC
[sigmove 18:34:11 DEBUG] transformed X331Mf.SPC -> X331MF.SPC
[Status 18:34:11 INFO] data for X331 transferred to science data processing
[Tidy 18:34:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:34:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:34:11 INFO] resetting WatchDogTimer
[Status 18:34:12 INFO] Starting Set [AERI set: name Y331, 6 scans, 0 angle, D16300 command]
[Ingest 18:34:12 INFO] Sending XML status message
[Status 18:34:12 INFO] Mirror angle: 0
[Mirror 18:34:12 INFO] rotating to position Y
[Status 18:34:13 INFO] .SET file for ACQ96 ready
[Ingest 18:34:13 INFO] Starting acquisition
[Status 18:34:13 INFO] reading housekeeping
[Status 18:34:32 INFO] acquire complete
[Status 18:34:33 INFO] writing housekeeping
[Sequencer 18:34:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:34:33 INFO] incremented Y scene to 331 completed views
[Sequencer 18:34:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:34:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:34:33 INFO] incremented to [AERI set: name Z331, 6 scans, 0 angle, D16300 command] set
[sigmove 18:34:33 INFO] Y331.SIG(18)
[sigmove 18:34:33 DEBUG] transformed Y331Ma.SPC -> Y331MA.SPC
[sigmove 18:34:33 DEBUG] transformed Y331Mb.SPC -> Y331MB.SPC
[sigmove 18:34:33 DEBUG] transformed Y331Mc.SPC -> Y331MC.SPC
[sigmove 18:34:33 DEBUG] transformed Y331Md.SPC -> Y331MD.SPC
[sigmove 18:34:33 DEBUG] transformed Y331Me.SPC -> Y331ME.SPC
[sigmove 18:34:33 DEBUG] transformed Y331Mf.SPC -> Y331MF.SPC
[Status 18:34:33 INFO] data for Y331 transferred to science data processing
[Tidy 18:34:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:34:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:34:33 INFO] resetting WatchDogTimer
[Status 18:34:33 INFO] Starting Set [AERI set: name Z331, 6 scans, 0 angle, D16300 command]
[Ingest 18:34:33 INFO] Sending XML status message
[Status 18:34:33 INFO] Mirror angle: 0
[Mirror 18:34:34 INFO] rotating to position Z
[Status 18:34:34 INFO] .SET file for ACQ96 ready
[Ingest 18:34:34 INFO] Starting acquisition
[Status 18:34:35 INFO] reading housekeeping
[Status 18:34:53 INFO] acquire complete
[Status 18:34:54 INFO] writing housekeeping
[Sequencer 18:34:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:34:54 INFO] incremented Z scene to 331 completed views
[Sequencer 18:34:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:34:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:34:54 INFO] incremented to [AERI set: name A332, 6 scans, 120 angle, D28300 command] set
[sigmove 18:34:54 INFO] Z331.SIG(18)
[sigmove 18:34:54 DEBUG] transformed Z331Ma.SPC -> Z331MA.SPC
[sigmove 18:34:54 DEBUG] transformed Z331Mb.SPC -> Z331MB.SPC
[sigmove 18:34:54 DEBUG] transformed Z331Mc.SPC -> Z331MC.SPC
[sigmove 18:34:54 DEBUG] transformed Z331Md.SPC -> Z331MD.SPC
[sigmove 18:34:54 DEBUG] transformed Z331Me.SPC -> Z331ME.SPC
[sigmove 18:34:54 DEBUG] transformed Z331Mf.SPC -> Z331MF.SPC
[Status 18:34:54 INFO] data for Z331 transferred to science data processing
[Tidy 18:34:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:34:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:34:54 INFO] resetting WatchDogTimer
[Status 18:34:54 INFO] Starting Set [AERI set: name A332, 6 scans, 120 angle, D28300 command]
[Ingest 18:34:54 INFO] Sending XML status message
[Status 18:34:54 INFO] Mirror angle: 120
[Mirror 18:34:55 INFO] rotating to position A
[Status 18:34:56 INFO] .SET file for ACQ96 ready
[Ingest 18:34:57 INFO] Starting acquisition
[Status 18:34:57 INFO] reading housekeeping
[Status 18:35:15 INFO] acquire complete
[Status 18:35:16 INFO] writing housekeeping
[Sequencer 18:35:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:35:16 INFO] incremented A scene to 332 completed views
[Sequencer 18:35:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:35:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:35:16 INFO] incremented to [AERI set: name H332, 6 scans, 60 angle, D22500 command] set
[sigmove 18:35:16 INFO] A332.SIG(18)
[sigmove 18:35:16 DEBUG] transformed A332Ma.SPC -> A332MA.SPC
[sigmove 18:35:16 DEBUG] transformed A332Mb.SPC -> A332MB.SPC
[sigmove 18:35:16 DEBUG] transformed A332Mc.SPC -> A332MC.SPC
[sigmove 18:35:16 DEBUG] transformed A332Md.SPC -> A332MD.SPC
[sigmove 18:35:16 DEBUG] transformed A332Me.SPC -> A332ME.SPC
[sigmove 18:35:16 DEBUG] transformed A332Mf.SPC -> A332MF.SPC
[Status 18:35:16 INFO] data for A332 transferred to science data processing
[Tidy 18:35:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:35:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:35:16 INFO] resetting WatchDogTimer
[Status 18:35:17 INFO] Starting Set [AERI set: name H332, 6 scans, 60 angle, D22500 command]
[Ingest 18:35:17 INFO] Sending XML status message
[Status 18:35:17 INFO] Mirror angle: 60
[Mirror 18:35:17 INFO] rotating to position H
[Status 18:35:18 INFO] .SET file for ACQ96 ready
[Ingest 18:35:19 INFO] Starting acquisition
[Status 18:35:19 INFO] reading housekeeping
[Status 18:35:37 INFO] acquire complete
[Status 18:35:38 INFO] writing housekeeping
[Sequencer 18:35:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:35:38 INFO] incremented H scene to 332 completed views
[Sequencer 18:35:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:35:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:35:38 INFO] incremented to [AERI set: name S332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:35:38 INFO] H332.SIG(18)
[sigmove 18:35:38 DEBUG] transformed H332Ma.SPC -> H332MA.SPC
[sigmove 18:35:38 DEBUG] transformed H332Mb.SPC -> H332MB.SPC
[sigmove 18:35:38 DEBUG] transformed H332Mc.SPC -> H332MC.SPC
[sigmove 18:35:38 DEBUG] transformed H332Md.SPC -> H332MD.SPC
[sigmove 18:35:38 DEBUG] transformed H332Me.SPC -> H332ME.SPC
[sigmove 18:35:38 DEBUG] transformed H332Mf.SPC -> H332MF.SPC
[Status 18:35:38 INFO] data for H332 transferred to science data processing
[Tidy 18:35:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:35:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:35:38 INFO] resetting WatchDogTimer
[Status 18:35:38 INFO] Starting Set [AERI set: name S332, 6 scans, 0 angle, D16300 command]
[Ingest 18:35:38 INFO] Sending XML status message
[Status 18:35:38 INFO] Mirror angle: 0
[Mirror 18:35:39 INFO] rotating to position S
[Status 18:35:40 INFO] .SET file for ACQ96 ready
[Ingest 18:35:40 INFO] Starting acquisition
[Status 18:35:40 INFO] reading housekeeping
[Status 18:35:58 INFO] acquire complete
[Status 18:35:59 INFO] writing housekeeping
[Sequencer 18:35:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:35:59 INFO] incremented S scene to 332 completed views
[Sequencer 18:35:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:35:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:35:59 INFO] incremented to [AERI set: name T332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:35:59 INFO] S332.SIG(18)
[sigmove 18:35:59 DEBUG] transformed S332Ma.SPC -> S332MA.SPC
[sigmove 18:35:59 DEBUG] transformed S332Mb.SPC -> S332MB.SPC
[sigmove 18:35:59 DEBUG] transformed S332Mc.SPC -> S332MC.SPC
[sigmove 18:35:59 DEBUG] transformed S332Md.SPC -> S332MD.SPC
[sigmove 18:35:59 DEBUG] transformed S332Me.SPC -> S332ME.SPC
[sigmove 18:35:59 DEBUG] transformed S332Mf.SPC -> S332MF.SPC
[Status 18:35:59 INFO] data for S332 transferred to science data processing
[Tidy 18:35:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:35:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:35:59 INFO] resetting WatchDogTimer
[Status 18:36:00 INFO] Starting Set [AERI set: name T332, 6 scans, 0 angle, D16300 command]
[Ingest 18:36:00 INFO] Sending XML status message
[Status 18:36:00 INFO] Mirror angle: 0
[Mirror 18:36:00 INFO] rotating to position T
[Status 18:36:01 INFO] .SET file for ACQ96 ready
[Ingest 18:36:01 INFO] Starting acquisition
[Status 18:36:01 INFO] reading housekeeping
[Status 18:36:19 INFO] acquire complete
[Status 18:36:20 INFO] writing housekeeping
[Sequencer 18:36:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:36:20 INFO] incremented T scene to 332 completed views
[Sequencer 18:36:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:36:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:36:20 INFO] incremented to [AERI set: name U332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:36:20 INFO] T332.SIG(18)
[sigmove 18:36:20 DEBUG] transformed T332Ma.SPC -> T332MA.SPC
[sigmove 18:36:20 DEBUG] transformed T332Mb.SPC -> T332MB.SPC
[sigmove 18:36:20 DEBUG] transformed T332Mc.SPC -> T332MC.SPC
[sigmove 18:36:20 DEBUG] transformed T332Md.SPC -> T332MD.SPC
[sigmove 18:36:20 DEBUG] transformed T332Me.SPC -> T332ME.SPC
[sigmove 18:36:20 DEBUG] transformed T332Mf.SPC -> T332MF.SPC
[Status 18:36:20 INFO] data for T332 transferred to science data processing
[Tidy 18:36:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:36:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:36:20 INFO] resetting WatchDogTimer
[Status 18:36:21 INFO] Starting Set [AERI set: name U332, 6 scans, 0 angle, D16300 command]
[Ingest 18:36:21 INFO] Sending XML status message
[Status 18:36:21 INFO] Mirror angle: 0
[Mirror 18:36:21 INFO] rotating to position U
[Status 18:36:22 INFO] .SET file for ACQ96 ready
[Ingest 18:36:22 INFO] Starting acquisition
[Status 18:36:22 INFO] reading housekeeping
[Status 18:36:41 INFO] acquire complete
[Status 18:36:42 INFO] writing housekeeping
[Sequencer 18:36:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:36:42 INFO] incremented U scene to 332 completed views
[Sequencer 18:36:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:36:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:36:42 INFO] incremented to [AERI set: name V332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:36:42 INFO] U332.SIG(18)
[sigmove 18:36:42 DEBUG] transformed U332Ma.SPC -> U332MA.SPC
[sigmove 18:36:42 DEBUG] transformed U332Mb.SPC -> U332MB.SPC
[sigmove 18:36:42 DEBUG] transformed U332Mc.SPC -> U332MC.SPC
[sigmove 18:36:42 DEBUG] transformed U332Md.SPC -> U332MD.SPC
[sigmove 18:36:42 DEBUG] transformed U332Me.SPC -> U332ME.SPC
[sigmove 18:36:42 DEBUG] transformed U332Mf.SPC -> U332MF.SPC
[Status 18:36:42 INFO] data for U332 transferred to science data processing
[Tidy 18:36:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:36:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:36:42 INFO] resetting WatchDogTimer
[Status 18:36:42 INFO] Starting Set [AERI set: name V332, 6 scans, 0 angle, D16300 command]
[Ingest 18:36:42 INFO] Sending XML status message
[Status 18:36:42 INFO] Mirror angle: 0
[Mirror 18:36:43 INFO] rotating to position V
[Status 18:36:43 INFO] .SET file for ACQ96 ready
[Ingest 18:36:43 INFO] Starting acquisition
[Status 18:36:44 INFO] reading housekeeping
[Status 18:37:02 INFO] acquire complete
[Status 18:37:03 INFO] writing housekeeping
[Sequencer 18:37:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:37:03 INFO] incremented V scene to 332 completed views
[Sequencer 18:37:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:37:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:37:03 INFO] incremented to [AERI set: name W332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:37:03 INFO] V332.SIG(18)
[sigmove 18:37:03 DEBUG] transformed V332Ma.SPC -> V332MA.SPC
[sigmove 18:37:03 DEBUG] transformed V332Mb.SPC -> V332MB.SPC
[sigmove 18:37:03 DEBUG] transformed V332Mc.SPC -> V332MC.SPC
[sigmove 18:37:03 DEBUG] transformed V332Md.SPC -> V332MD.SPC
[sigmove 18:37:03 DEBUG] transformed V332Me.SPC -> V332ME.SPC
[sigmove 18:37:03 DEBUG] transformed V332Mf.SPC -> V332MF.SPC
[Status 18:37:03 INFO] data for V332 transferred to science data processing
[Tidy 18:37:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:37:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:37:03 INFO] resetting WatchDogTimer
[Status 18:37:03 INFO] Starting Set [AERI set: name W332, 6 scans, 0 angle, D16300 command]
[Ingest 18:37:03 INFO] Sending XML status message
[Status 18:37:03 INFO] Mirror angle: 0
[Mirror 18:37:04 INFO] rotating to position W
[Status 18:37:04 INFO] .SET file for ACQ96 ready
[Ingest 18:37:05 INFO] Starting acquisition
[Status 18:37:05 INFO] reading housekeeping
[Status 18:37:23 INFO] acquire complete
[Status 18:37:24 INFO] writing housekeeping
[Sequencer 18:37:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:37:24 INFO] incremented W scene to 332 completed views
[Sequencer 18:37:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:37:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:37:24 INFO] incremented to [AERI set: name X332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:37:24 INFO] W332.SIG(18)
[sigmove 18:37:24 DEBUG] transformed W332Ma.SPC -> W332MA.SPC
[sigmove 18:37:24 DEBUG] transformed W332Mb.SPC -> W332MB.SPC
[sigmove 18:37:24 DEBUG] transformed W332Mc.SPC -> W332MC.SPC
[sigmove 18:37:24 DEBUG] transformed W332Md.SPC -> W332MD.SPC
[sigmove 18:37:24 DEBUG] transformed W332Me.SPC -> W332ME.SPC
[sigmove 18:37:24 DEBUG] transformed W332Mf.SPC -> W332MF.SPC
[Status 18:37:24 INFO] data for W332 transferred to science data processing
[Tidy 18:37:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:37:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:37:24 INFO] resetting WatchDogTimer
[Status 18:37:25 INFO] Starting Set [AERI set: name X332, 6 scans, 0 angle, D16300 command]
[Ingest 18:37:25 INFO] Sending XML status message
[Status 18:37:25 INFO] Mirror angle: 0
[Mirror 18:37:25 INFO] rotating to position X
[Status 18:37:26 INFO] .SET file for ACQ96 ready
[Ingest 18:37:26 INFO] Starting acquisition
[Status 18:37:26 INFO] reading housekeeping
[Status 18:37:45 INFO] acquire complete
[Status 18:37:46 INFO] writing housekeeping
[Sequencer 18:37:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:37:46 INFO] incremented X scene to 332 completed views
[Sequencer 18:37:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:37:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:37:46 INFO] incremented to [AERI set: name Y332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:37:46 INFO] X332.SIG(18)
[sigmove 18:37:46 DEBUG] transformed X332Ma.SPC -> X332MA.SPC
[sigmove 18:37:46 DEBUG] transformed X332Mb.SPC -> X332MB.SPC
[sigmove 18:37:46 DEBUG] transformed X332Mc.SPC -> X332MC.SPC
[sigmove 18:37:46 DEBUG] transformed X332Md.SPC -> X332MD.SPC
[sigmove 18:37:46 DEBUG] transformed X332Me.SPC -> X332ME.SPC
[sigmove 18:37:46 DEBUG] transformed X332Mf.SPC -> X332MF.SPC
[Status 18:37:46 INFO] data for X332 transferred to science data processing
[Tidy 18:37:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:37:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:37:46 INFO] resetting WatchDogTimer
[Status 18:37:46 INFO] Starting Set [AERI set: name Y332, 6 scans, 0 angle, D16300 command]
[Ingest 18:37:46 INFO] Sending XML status message
[Status 18:37:46 INFO] Mirror angle: 0
[Mirror 18:37:46 INFO] rotating to position Y
[Status 18:37:47 INFO] .SET file for ACQ96 ready
[Ingest 18:37:47 INFO] Starting acquisition
[Status 18:37:48 INFO] reading housekeeping
[Status 18:38:06 INFO] acquire complete
[Status 18:38:07 INFO] writing housekeeping
[Sequencer 18:38:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:38:07 INFO] incremented Y scene to 332 completed views
[Sequencer 18:38:07 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:38:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:38:07 INFO] incremented to [AERI set: name Z332, 6 scans, 0 angle, D16300 command] set
[sigmove 18:38:07 INFO] Y332.SIG(18)
[sigmove 18:38:07 DEBUG] transformed Y332Ma.SPC -> Y332MA.SPC
[sigmove 18:38:07 DEBUG] transformed Y332Mb.SPC -> Y332MB.SPC
[sigmove 18:38:07 DEBUG] transformed Y332Mc.SPC -> Y332MC.SPC
[sigmove 18:38:07 DEBUG] transformed Y332Md.SPC -> Y332MD.SPC
[sigmove 18:38:07 DEBUG] transformed Y332Me.SPC -> Y332ME.SPC
[sigmove 18:38:07 DEBUG] transformed Y332Mf.SPC -> Y332MF.SPC
[Status 18:38:07 INFO] data for Y332 transferred to science data processing
[Tidy 18:38:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:38:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:38:07 INFO] resetting WatchDogTimer
[Status 18:38:07 INFO] Starting Set [AERI set: name Z332, 6 scans, 0 angle, D16300 command]
[Ingest 18:38:07 INFO] Sending XML status message
[Status 18:38:07 INFO] Mirror angle: 0
[Mirror 18:38:08 INFO] rotating to position Z
[Status 18:38:08 INFO] .SET file for ACQ96 ready
[Ingest 18:38:09 INFO] Starting acquisition
[Status 18:38:09 INFO] reading housekeeping
[Status 18:38:27 INFO] acquire complete
[Status 18:38:28 INFO] writing housekeeping
[Sequencer 18:38:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:38:28 INFO] incremented Z scene to 332 completed views
[Sequencer 18:38:28 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:38:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:38:28 INFO] incremented to [AERI set: name H333, 6 scans, 60 angle, D22500 command] set
[sigmove 18:38:28 INFO] Z332.SIG(18)
[sigmove 18:38:28 DEBUG] transformed Z332Ma.SPC -> Z332MA.SPC
[sigmove 18:38:28 DEBUG] transformed Z332Mb.SPC -> Z332MB.SPC
[sigmove 18:38:28 DEBUG] transformed Z332Mc.SPC -> Z332MC.SPC
[sigmove 18:38:28 DEBUG] transformed Z332Md.SPC -> Z332MD.SPC
[sigmove 18:38:28 DEBUG] transformed Z332Me.SPC -> Z332ME.SPC
[sigmove 18:38:28 DEBUG] transformed Z332Mf.SPC -> Z332MF.SPC
[Status 18:38:28 INFO] data for Z332 transferred to science data processing
[Tidy 18:38:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:38:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:38:28 INFO] resetting WatchDogTimer
[Status 18:38:29 INFO] Starting Set [AERI set: name H333, 6 scans, 60 angle, D22500 command]
[Ingest 18:38:29 INFO] Sending XML status message
[Status 18:38:29 INFO] Mirror angle: 60
[Mirror 18:38:29 INFO] rotating to position H
[Status 18:38:30 INFO] .SET file for ACQ96 ready
[Ingest 18:38:30 INFO] Starting acquisition
[Status 18:38:31 INFO] reading housekeeping
[Status 18:38:48 INFO] acquire complete
[Status 18:38:50 INFO] writing housekeeping
[Sequencer 18:38:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:38:50 INFO] incremented H scene to 333 completed views
[Sequencer 18:38:50 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:38:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:38:50 INFO] incremented to [AERI set: name A333, 6 scans, 120 angle, D28300 command] set
[sigmove 18:38:50 INFO] H333.SIG(18)
[sigmove 18:38:50 DEBUG] transformed H333Ma.SPC -> H333MA.SPC
[sigmove 18:38:50 DEBUG] transformed H333Mb.SPC -> H333MB.SPC
[sigmove 18:38:50 DEBUG] transformed H333Mc.SPC -> H333MC.SPC
[sigmove 18:38:50 DEBUG] transformed H333Md.SPC -> H333MD.SPC
[sigmove 18:38:50 DEBUG] transformed H333Me.SPC -> H333ME.SPC
[sigmove 18:38:50 DEBUG] transformed H333Mf.SPC -> H333MF.SPC
[Status 18:38:50 INFO] data for H333 transferred to science data processing
[Tidy 18:38:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:38:50 INFO] A331.FIN(19),H331.FIN(19),S331.FIN(19),T331.FIN(19),U331.FIN(19),V331.FIN(19),W331.FIN(19),X331.FIN(19),Y331.FIN(19),Z331.FIN(19),A332.FIN(19),H332.FIN(19),S332.FIN(19),T332.FIN(19),U332.FIN(19),V332.FIN(19),W332.FIN(19),X332.FIN(19),Y332.FIN(19),Z332.FIN(19)
[sigmove 18:38:50 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:38:50 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:38:55 DEBUG] done zipping
[WatchDog 18:38:56 INFO] resetting WatchDogTimer
[Status 18:38:56 INFO] Starting Set [AERI set: name A333, 6 scans, 120 angle, D28300 command]
[Ingest 18:38:56 INFO] Sending XML status message
[Status 18:38:56 INFO] Mirror angle: 120
[Mirror 18:38:57 INFO] rotating to position A
[Status 18:38:58 INFO] .SET file for ACQ96 ready
[Ingest 18:38:58 INFO] Starting acquisition
[Status 18:38:59 INFO] reading housekeeping
[Status 18:39:16 INFO] acquire complete
[Status 18:39:18 INFO] writing housekeeping
[Sequencer 18:39:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:39:18 INFO] incremented A scene to 333 completed views
[Sequencer 18:39:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:39:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:39:18 INFO] incremented to [AERI set: name S333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:39:18 INFO] A333.SIG(18)
[sigmove 18:39:18 DEBUG] transformed A333Ma.SPC -> A333MA.SPC
[sigmove 18:39:18 DEBUG] transformed A333Mb.SPC -> A333MB.SPC
[sigmove 18:39:18 DEBUG] transformed A333Mc.SPC -> A333MC.SPC
[sigmove 18:39:18 DEBUG] transformed A333Md.SPC -> A333MD.SPC
[sigmove 18:39:18 DEBUG] transformed A333Me.SPC -> A333ME.SPC
[sigmove 18:39:18 DEBUG] transformed A333Mf.SPC -> A333MF.SPC
[Status 18:39:18 INFO] data for A333 transferred to science data processing
[Tidy 18:39:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:39:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:39:18 INFO] resetting WatchDogTimer
[Status 18:39:18 INFO] Starting Set [AERI set: name S333, 6 scans, 0 angle, D16300 command]
[Ingest 18:39:18 INFO] Sending XML status message
[Status 18:39:18 INFO] Mirror angle: 0
[Mirror 18:39:18 INFO] rotating to position S
[Status 18:39:20 INFO] .SET file for ACQ96 ready
[Ingest 18:39:20 INFO] Starting acquisition
[Status 18:39:21 INFO] reading housekeeping
[Status 18:39:39 INFO] acquire complete
[Status 18:39:40 INFO] writing housekeeping
[Sequencer 18:39:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:39:40 INFO] incremented S scene to 333 completed views
[Sequencer 18:39:40 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:39:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:39:40 INFO] incremented to [AERI set: name T333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:39:40 INFO] S333.SIG(18)
[sigmove 18:39:40 DEBUG] transformed S333Ma.SPC -> S333MA.SPC
[sigmove 18:39:40 DEBUG] transformed S333Mb.SPC -> S333MB.SPC
[sigmove 18:39:40 DEBUG] transformed S333Mc.SPC -> S333MC.SPC
[sigmove 18:39:40 DEBUG] transformed S333Md.SPC -> S333MD.SPC
[sigmove 18:39:40 DEBUG] transformed S333Me.SPC -> S333ME.SPC
[sigmove 18:39:40 DEBUG] transformed S333Mf.SPC -> S333MF.SPC
[Status 18:39:40 INFO] data for S333 transferred to science data processing
[Tidy 18:39:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:39:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:39:40 INFO] resetting WatchDogTimer
[Status 18:39:41 INFO] Starting Set [AERI set: name T333, 6 scans, 0 angle, D16300 command]
[Ingest 18:39:41 INFO] Sending XML status message
[Status 18:39:41 INFO] Mirror angle: 0
[Mirror 18:39:41 INFO] rotating to position T
[Status 18:39:42 INFO] .SET file for ACQ96 ready
[Ingest 18:39:42 INFO] Starting acquisition
[Status 18:39:42 INFO] reading housekeeping
[Status 18:40:00 INFO] acquire complete
[Status 18:40:01 INFO] writing housekeeping
[Sequencer 18:40:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:40:01 INFO] incremented T scene to 333 completed views
[Sequencer 18:40:01 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:40:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:40:01 INFO] incremented to [AERI set: name U333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:40:01 INFO] T333.SIG(18)
[sigmove 18:40:01 DEBUG] transformed T333Ma.SPC -> T333MA.SPC
[sigmove 18:40:01 DEBUG] transformed T333Mb.SPC -> T333MB.SPC
[sigmove 18:40:01 DEBUG] transformed T333Mc.SPC -> T333MC.SPC
[sigmove 18:40:01 DEBUG] transformed T333Md.SPC -> T333MD.SPC
[sigmove 18:40:01 DEBUG] transformed T333Me.SPC -> T333ME.SPC
[sigmove 18:40:01 DEBUG] transformed T333Mf.SPC -> T333MF.SPC
[Status 18:40:01 INFO] data for T333 transferred to science data processing
[Tidy 18:40:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:40:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:40:01 INFO] resetting WatchDogTimer
[Status 18:40:02 INFO] Starting Set [AERI set: name U333, 6 scans, 0 angle, D16300 command]
[Ingest 18:40:02 INFO] Sending XML status message
[Status 18:40:02 INFO] Mirror angle: 0
[Mirror 18:40:02 INFO] rotating to position U
[Status 18:40:03 INFO] .SET file for ACQ96 ready
[Ingest 18:40:03 INFO] Starting acquisition
[Status 18:40:03 INFO] reading housekeeping
[Status 18:40:22 INFO] acquire complete
[Status 18:40:23 INFO] writing housekeeping
[Sequencer 18:40:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:40:23 INFO] incremented U scene to 333 completed views
[Sequencer 18:40:23 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:40:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:40:23 INFO] incremented to [AERI set: name V333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:40:23 INFO] U333.SIG(18)
[sigmove 18:40:23 DEBUG] transformed U333Ma.SPC -> U333MA.SPC
[sigmove 18:40:23 DEBUG] transformed U333Mb.SPC -> U333MB.SPC
[sigmove 18:40:23 DEBUG] transformed U333Mc.SPC -> U333MC.SPC
[sigmove 18:40:23 DEBUG] transformed U333Md.SPC -> U333MD.SPC
[sigmove 18:40:23 DEBUG] transformed U333Me.SPC -> U333ME.SPC
[sigmove 18:40:23 DEBUG] transformed U333Mf.SPC -> U333MF.SPC
[Status 18:40:23 INFO] data for U333 transferred to science data processing
[Tidy 18:40:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:40:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:40:23 INFO] resetting WatchDogTimer
[Status 18:40:23 INFO] Starting Set [AERI set: name V333, 6 scans, 0 angle, D16300 command]
[Ingest 18:40:23 INFO] Sending XML status message
[Status 18:40:23 INFO] Mirror angle: 0
[Mirror 18:40:23 INFO] rotating to position V
[Status 18:40:24 INFO] .SET file for ACQ96 ready
[Ingest 18:40:24 INFO] Starting acquisition
[Status 18:40:25 INFO] reading housekeeping
[Status 18:40:43 INFO] acquire complete
[Status 18:40:44 INFO] writing housekeeping
[Sequencer 18:40:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:40:44 INFO] incremented V scene to 333 completed views
[Sequencer 18:40:44 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:40:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:40:44 INFO] incremented to [AERI set: name W333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:40:44 INFO] V333.SIG(18)
[sigmove 18:40:44 DEBUG] transformed V333Ma.SPC -> V333MA.SPC
[sigmove 18:40:44 DEBUG] transformed V333Mb.SPC -> V333MB.SPC
[sigmove 18:40:44 DEBUG] transformed V333Mc.SPC -> V333MC.SPC
[sigmove 18:40:44 DEBUG] transformed V333Md.SPC -> V333MD.SPC
[sigmove 18:40:44 DEBUG] transformed V333Me.SPC -> V333ME.SPC
[sigmove 18:40:44 DEBUG] transformed V333Mf.SPC -> V333MF.SPC
[Status 18:40:44 INFO] data for V333 transferred to science data processing
[Tidy 18:40:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:40:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:40:44 INFO] resetting WatchDogTimer
[Status 18:40:44 INFO] Starting Set [AERI set: name W333, 6 scans, 0 angle, D16300 command]
[Ingest 18:40:44 INFO] Sending XML status message
[Status 18:40:44 INFO] Mirror angle: 0
[Mirror 18:40:45 INFO] rotating to position W
[Status 18:40:45 INFO] .SET file for ACQ96 ready
[Ingest 18:40:46 INFO] Starting acquisition
[Status 18:40:46 INFO] reading housekeeping
[Status 18:41:04 INFO] acquire complete
[Status 18:41:05 INFO] writing housekeeping
[Sequencer 18:41:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:41:05 INFO] incremented W scene to 333 completed views
[Sequencer 18:41:05 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:41:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:41:05 INFO] incremented to [AERI set: name X333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:41:05 INFO] W333.SIG(18)
[sigmove 18:41:05 DEBUG] transformed W333Ma.SPC -> W333MA.SPC
[sigmove 18:41:05 DEBUG] transformed W333Mb.SPC -> W333MB.SPC
[sigmove 18:41:05 DEBUG] transformed W333Mc.SPC -> W333MC.SPC
[sigmove 18:41:05 DEBUG] transformed W333Md.SPC -> W333MD.SPC
[sigmove 18:41:05 DEBUG] transformed W333Me.SPC -> W333ME.SPC
[sigmove 18:41:05 DEBUG] transformed W333Mf.SPC -> W333MF.SPC
[Status 18:41:05 INFO] data for W333 transferred to science data processing
[Tidy 18:41:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:41:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:41:05 INFO] resetting WatchDogTimer
[Status 18:41:06 INFO] Starting Set [AERI set: name X333, 6 scans, 0 angle, D16300 command]
[Ingest 18:41:06 INFO] Sending XML status message
[Status 18:41:06 INFO] Mirror angle: 0
[Mirror 18:41:06 INFO] rotating to position X
[Status 18:41:07 INFO] .SET file for ACQ96 ready
[Ingest 18:41:07 INFO] Starting acquisition
[Status 18:41:07 INFO] reading housekeeping
[Status 18:41:25 INFO] acquire complete
[Status 18:41:27 INFO] writing housekeeping
[Sequencer 18:41:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:41:27 INFO] incremented X scene to 333 completed views
[Sequencer 18:41:27 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:41:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:41:27 INFO] incremented to [AERI set: name Y333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:41:27 INFO] X333.SIG(18)
[sigmove 18:41:27 DEBUG] transformed X333Ma.SPC -> X333MA.SPC
[sigmove 18:41:27 DEBUG] transformed X333Mb.SPC -> X333MB.SPC
[sigmove 18:41:27 DEBUG] transformed X333Mc.SPC -> X333MC.SPC
[sigmove 18:41:27 DEBUG] transformed X333Md.SPC -> X333MD.SPC
[sigmove 18:41:27 DEBUG] transformed X333Me.SPC -> X333ME.SPC
[sigmove 18:41:27 DEBUG] transformed X333Mf.SPC -> X333MF.SPC
[Status 18:41:27 INFO] data for X333 transferred to science data processing
[Tidy 18:41:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:41:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:41:27 INFO] resetting WatchDogTimer
[Status 18:41:27 INFO] Starting Set [AERI set: name Y333, 6 scans, 0 angle, D16300 command]
[Ingest 18:41:27 INFO] Sending XML status message
[Status 18:41:27 INFO] Mirror angle: 0
[Mirror 18:41:27 INFO] rotating to position Y
[Status 18:41:28 INFO] .SET file for ACQ96 ready
[Ingest 18:41:28 INFO] Starting acquisition
[Status 18:41:29 INFO] reading housekeeping
[Status 18:41:47 INFO] acquire complete
[Status 18:41:48 INFO] writing housekeeping
[Sequencer 18:41:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:41:48 INFO] incremented Y scene to 333 completed views
[Sequencer 18:41:48 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:41:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:41:48 INFO] incremented to [AERI set: name Z333, 6 scans, 0 angle, D16300 command] set
[sigmove 18:41:48 INFO] Y333.SIG(18)
[sigmove 18:41:48 DEBUG] transformed Y333Ma.SPC -> Y333MA.SPC
[sigmove 18:41:48 DEBUG] transformed Y333Mb.SPC -> Y333MB.SPC
[sigmove 18:41:48 DEBUG] transformed Y333Mc.SPC -> Y333MC.SPC
[sigmove 18:41:48 DEBUG] transformed Y333Md.SPC -> Y333MD.SPC
[sigmove 18:41:48 DEBUG] transformed Y333Me.SPC -> Y333ME.SPC
[sigmove 18:41:48 DEBUG] transformed Y333Mf.SPC -> Y333MF.SPC
[Status 18:41:48 INFO] data for Y333 transferred to science data processing
[Tidy 18:41:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:41:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:41:48 INFO] resetting WatchDogTimer
[Status 18:41:48 INFO] Starting Set [AERI set: name Z333, 6 scans, 0 angle, D16300 command]
[Ingest 18:41:48 INFO] Sending XML status message
[Status 18:41:48 INFO] Mirror angle: 0
[Mirror 18:41:49 INFO] rotating to position Z
[Status 18:41:49 INFO] .SET file for ACQ96 ready
[Ingest 18:41:50 INFO] Starting acquisition
[Status 18:41:50 INFO] reading housekeeping
[Status 18:42:08 INFO] acquire complete
[Status 18:42:09 INFO] writing housekeeping
[Sequencer 18:42:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:42:09 INFO] incremented Z scene to 333 completed views
[Sequencer 18:42:09 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:42:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:42:09 INFO] incremented to [AERI set: name A334, 6 scans, 120 angle, D28300 command] set
[sigmove 18:42:09 INFO] Z333.SIG(18)
[sigmove 18:42:09 DEBUG] transformed Z333Ma.SPC -> Z333MA.SPC
[sigmove 18:42:09 DEBUG] transformed Z333Mb.SPC -> Z333MB.SPC
[sigmove 18:42:09 DEBUG] transformed Z333Mc.SPC -> Z333MC.SPC
[sigmove 18:42:09 DEBUG] transformed Z333Md.SPC -> Z333MD.SPC
[sigmove 18:42:09 DEBUG] transformed Z333Me.SPC -> Z333ME.SPC
[sigmove 18:42:09 DEBUG] transformed Z333Mf.SPC -> Z333MF.SPC
[Status 18:42:09 INFO] data for Z333 transferred to science data processing
[Tidy 18:42:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:42:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:42:09 INFO] resetting WatchDogTimer
[Status 18:42:10 INFO] Starting Set [AERI set: name A334, 6 scans, 120 angle, D28300 command]
[Ingest 18:42:10 INFO] Sending XML status message
[Status 18:42:10 INFO] Mirror angle: 120
[Mirror 18:42:10 INFO] rotating to position A
[Status 18:42:12 INFO] .SET file for ACQ96 ready
[Ingest 18:42:12 INFO] Starting acquisition
[Status 18:42:12 INFO] reading housekeeping
[Status 18:42:31 INFO] acquire complete
[Status 18:42:32 INFO] writing housekeeping
[Sequencer 18:42:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:42:32 INFO] incremented A scene to 334 completed views
[Sequencer 18:42:32 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:42:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:42:32 INFO] incremented to [AERI set: name H334, 6 scans, 60 angle, D22500 command] set
[sigmove 18:42:32 INFO] A334.SIG(18)
[sigmove 18:42:32 DEBUG] transformed A334Ma.SPC -> A334MA.SPC
[sigmove 18:42:32 DEBUG] transformed A334Mb.SPC -> A334MB.SPC
[sigmove 18:42:32 DEBUG] transformed A334Mc.SPC -> A334MC.SPC
[sigmove 18:42:32 DEBUG] transformed A334Md.SPC -> A334MD.SPC
[sigmove 18:42:32 DEBUG] transformed A334Me.SPC -> A334ME.SPC
[sigmove 18:42:32 DEBUG] transformed A334Mf.SPC -> A334MF.SPC
[Status 18:42:32 INFO] data for A334 transferred to science data processing
[Tidy 18:42:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:42:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:42:32 INFO] resetting WatchDogTimer
[Status 18:42:32 INFO] Starting Set [AERI set: name H334, 6 scans, 60 angle, D22500 command]
[Ingest 18:42:32 INFO] Sending XML status message
[Status 18:42:32 INFO] Mirror angle: 60
[Mirror 18:42:32 INFO] rotating to position H
[Status 18:42:33 INFO] .SET file for ACQ96 ready
[Ingest 18:42:34 INFO] Starting acquisition
[Status 18:42:34 INFO] reading housekeeping
[Status 18:42:52 INFO] acquire complete
[Status 18:42:53 INFO] writing housekeeping
[Sequencer 18:42:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:42:53 INFO] incremented H scene to 334 completed views
[Sequencer 18:42:53 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:42:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:42:53 INFO] incremented to [AERI set: name S334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:42:53 INFO] H334.SIG(18)
[sigmove 18:42:53 DEBUG] transformed H334Ma.SPC -> H334MA.SPC
[sigmove 18:42:53 DEBUG] transformed H334Mb.SPC -> H334MB.SPC
[sigmove 18:42:53 DEBUG] transformed H334Mc.SPC -> H334MC.SPC
[sigmove 18:42:53 DEBUG] transformed H334Md.SPC -> H334MD.SPC
[sigmove 18:42:53 DEBUG] transformed H334Me.SPC -> H334ME.SPC
[sigmove 18:42:53 DEBUG] transformed H334Mf.SPC -> H334MF.SPC
[Status 18:42:53 INFO] data for H334 transferred to science data processing
[Tidy 18:42:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:42:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:42:53 INFO] resetting WatchDogTimer
[Status 18:42:53 INFO] Starting Set [AERI set: name S334, 6 scans, 0 angle, D16300 command]
[Ingest 18:42:53 INFO] Sending XML status message
[Status 18:42:53 INFO] Mirror angle: 0
[Mirror 18:42:54 INFO] rotating to position S
[Status 18:42:55 INFO] .SET file for ACQ96 ready
[Ingest 18:42:55 INFO] Starting acquisition
[Status 18:42:56 INFO] reading housekeeping
[Status 18:43:13 INFO] acquire complete
[Status 18:43:14 INFO] writing housekeeping
[Sequencer 18:43:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:43:14 INFO] incremented S scene to 334 completed views
[Sequencer 18:43:14 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:43:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:43:14 INFO] incremented to [AERI set: name T334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:43:14 INFO] S334.SIG(18)
[sigmove 18:43:14 DEBUG] transformed S334Ma.SPC -> S334MA.SPC
[sigmove 18:43:14 DEBUG] transformed S334Mb.SPC -> S334MB.SPC
[sigmove 18:43:14 DEBUG] transformed S334Mc.SPC -> S334MC.SPC
[sigmove 18:43:14 DEBUG] transformed S334Md.SPC -> S334MD.SPC
[sigmove 18:43:14 DEBUG] transformed S334Me.SPC -> S334ME.SPC
[sigmove 18:43:14 DEBUG] transformed S334Mf.SPC -> S334MF.SPC
[Status 18:43:14 INFO] data for S334 transferred to science data processing
[Tidy 18:43:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:43:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:43:14 INFO] resetting WatchDogTimer
[Status 18:43:15 INFO] Starting Set [AERI set: name T334, 6 scans, 0 angle, D16300 command]
[Ingest 18:43:15 INFO] Sending XML status message
[Status 18:43:15 INFO] Mirror angle: 0
[Mirror 18:43:15 INFO] rotating to position T
[Status 18:43:16 INFO] .SET file for ACQ96 ready
[Ingest 18:43:16 INFO] Starting acquisition
[Status 18:43:16 INFO] reading housekeeping
[Status 18:43:34 INFO] acquire complete
[Status 18:43:36 INFO] writing housekeeping
[Sequencer 18:43:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:43:36 INFO] incremented T scene to 334 completed views
[Sequencer 18:43:36 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:43:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:43:36 INFO] incremented to [AERI set: name U334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:43:36 INFO] T334.SIG(18)
[sigmove 18:43:36 DEBUG] transformed T334Ma.SPC -> T334MA.SPC
[sigmove 18:43:36 DEBUG] transformed T334Mb.SPC -> T334MB.SPC
[sigmove 18:43:36 DEBUG] transformed T334Mc.SPC -> T334MC.SPC
[sigmove 18:43:36 DEBUG] transformed T334Md.SPC -> T334MD.SPC
[sigmove 18:43:36 DEBUG] transformed T334Me.SPC -> T334ME.SPC
[sigmove 18:43:36 DEBUG] transformed T334Mf.SPC -> T334MF.SPC
[Status 18:43:36 INFO] data for T334 transferred to science data processing
[Tidy 18:43:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:43:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:43:36 INFO] resetting WatchDogTimer
[Status 18:43:36 INFO] Starting Set [AERI set: name U334, 6 scans, 0 angle, D16300 command]
[Ingest 18:43:36 INFO] Sending XML status message
[Status 18:43:36 INFO] Mirror angle: 0
[Mirror 18:43:36 INFO] rotating to position U
[Status 18:43:37 INFO] .SET file for ACQ96 ready
[Ingest 18:43:37 INFO] Starting acquisition
[Status 18:43:38 INFO] reading housekeeping
[Status 18:43:56 INFO] acquire complete
[Status 18:43:57 INFO] writing housekeeping
[Sequencer 18:43:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:43:57 INFO] incremented U scene to 334 completed views
[Sequencer 18:43:57 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:43:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:43:57 INFO] incremented to [AERI set: name V334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:43:57 INFO] U334.SIG(18)
[sigmove 18:43:57 DEBUG] transformed U334Ma.SPC -> U334MA.SPC
[sigmove 18:43:57 DEBUG] transformed U334Mb.SPC -> U334MB.SPC
[sigmove 18:43:57 DEBUG] transformed U334Mc.SPC -> U334MC.SPC
[sigmove 18:43:57 DEBUG] transformed U334Md.SPC -> U334MD.SPC
[sigmove 18:43:57 DEBUG] transformed U334Me.SPC -> U334ME.SPC
[sigmove 18:43:57 DEBUG] transformed U334Mf.SPC -> U334MF.SPC
[Status 18:43:57 INFO] data for U334 transferred to science data processing
[Tidy 18:43:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:43:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:43:57 INFO] resetting WatchDogTimer
[Status 18:43:57 INFO] Starting Set [AERI set: name V334, 6 scans, 0 angle, D16300 command]
[Ingest 18:43:57 INFO] Sending XML status message
[Status 18:43:57 INFO] Mirror angle: 0
[Mirror 18:43:58 INFO] rotating to position V
[Status 18:43:58 INFO] .SET file for ACQ96 ready
[Ingest 18:43:59 INFO] Starting acquisition
[Status 18:43:59 INFO] reading housekeeping
[Status 18:44:17 INFO] acquire complete
[Status 18:44:18 INFO] writing housekeeping
[Sequencer 18:44:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:44:18 INFO] incremented V scene to 334 completed views
[Sequencer 18:44:18 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:44:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:44:18 INFO] incremented to [AERI set: name W334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:44:18 INFO] V334.SIG(18)
[sigmove 18:44:18 DEBUG] transformed V334Ma.SPC -> V334MA.SPC
[sigmove 18:44:18 DEBUG] transformed V334Mb.SPC -> V334MB.SPC
[sigmove 18:44:18 DEBUG] transformed V334Mc.SPC -> V334MC.SPC
[sigmove 18:44:18 DEBUG] transformed V334Md.SPC -> V334MD.SPC
[sigmove 18:44:18 DEBUG] transformed V334Me.SPC -> V334ME.SPC
[sigmove 18:44:18 DEBUG] transformed V334Mf.SPC -> V334MF.SPC
[Status 18:44:18 INFO] data for V334 transferred to science data processing
[Tidy 18:44:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:44:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:44:18 INFO] resetting WatchDogTimer
[Status 18:44:19 INFO] Starting Set [AERI set: name W334, 6 scans, 0 angle, D16300 command]
[Ingest 18:44:19 INFO] Sending XML status message
[Status 18:44:19 INFO] Mirror angle: 0
[Mirror 18:44:19 INFO] rotating to position W
[Status 18:44:20 INFO] .SET file for ACQ96 ready
[Ingest 18:44:20 INFO] Starting acquisition
[Status 18:44:20 INFO] reading housekeeping
[Status 18:44:38 INFO] acquire complete
[Status 18:44:39 INFO] writing housekeeping
[Sequencer 18:44:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:44:39 INFO] incremented W scene to 334 completed views
[Sequencer 18:44:39 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:44:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:44:39 INFO] incremented to [AERI set: name X334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:44:39 INFO] W334.SIG(18)
[sigmove 18:44:39 DEBUG] transformed W334Ma.SPC -> W334MA.SPC
[sigmove 18:44:39 DEBUG] transformed W334Mb.SPC -> W334MB.SPC
[sigmove 18:44:39 DEBUG] transformed W334Mc.SPC -> W334MC.SPC
[sigmove 18:44:39 DEBUG] transformed W334Md.SPC -> W334MD.SPC
[sigmove 18:44:39 DEBUG] transformed W334Me.SPC -> W334ME.SPC
[sigmove 18:44:39 DEBUG] transformed W334Mf.SPC -> W334MF.SPC
[Status 18:44:39 INFO] data for W334 transferred to science data processing
[Tidy 18:44:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:44:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:44:39 INFO] resetting WatchDogTimer
[Status 18:44:40 INFO] Starting Set [AERI set: name X334, 6 scans, 0 angle, D16300 command]
[Ingest 18:44:40 INFO] Sending XML status message
[Status 18:44:40 INFO] Mirror angle: 0
[Mirror 18:44:40 INFO] rotating to position X
[Status 18:44:41 INFO] .SET file for ACQ96 ready
[Ingest 18:44:41 INFO] Starting acquisition
[Status 18:44:42 INFO] reading housekeeping
[Status 18:45:00 INFO] acquire complete
[Status 18:45:01 INFO] writing housekeeping
[Sequencer 18:45:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:45:01 INFO] incremented X scene to 334 completed views
[Sequencer 18:45:01 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:45:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:45:01 INFO] incremented to [AERI set: name Y334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:45:01 INFO] X334.SIG(18)
[sigmove 18:45:01 DEBUG] transformed X334Ma.SPC -> X334MA.SPC
[sigmove 18:45:01 DEBUG] transformed X334Mb.SPC -> X334MB.SPC
[sigmove 18:45:01 DEBUG] transformed X334Mc.SPC -> X334MC.SPC
[sigmove 18:45:01 DEBUG] transformed X334Md.SPC -> X334MD.SPC
[sigmove 18:45:01 DEBUG] transformed X334Me.SPC -> X334ME.SPC
[sigmove 18:45:01 DEBUG] transformed X334Mf.SPC -> X334MF.SPC
[Status 18:45:01 INFO] data for X334 transferred to science data processing
[Tidy 18:45:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:45:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:45:01 INFO] resetting WatchDogTimer
[Status 18:45:01 INFO] Starting Set [AERI set: name Y334, 6 scans, 0 angle, D16300 command]
[Ingest 18:45:01 INFO] Sending XML status message
[Status 18:45:01 INFO] Mirror angle: 0
[Mirror 18:45:02 INFO] rotating to position Y
[Status 18:45:02 INFO] .SET file for ACQ96 ready
[Ingest 18:45:03 INFO] Starting acquisition
[Status 18:45:03 INFO] reading housekeeping
[Status 18:45:21 INFO] acquire complete
[Status 18:45:22 INFO] writing housekeeping
[Sequencer 18:45:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:45:22 INFO] incremented Y scene to 334 completed views
[Sequencer 18:45:22 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:45:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:45:22 INFO] incremented to [AERI set: name Z334, 6 scans, 0 angle, D16300 command] set
[sigmove 18:45:22 INFO] Y334.SIG(18)
[sigmove 18:45:22 DEBUG] transformed Y334Ma.SPC -> Y334MA.SPC
[sigmove 18:45:22 DEBUG] transformed Y334Mb.SPC -> Y334MB.SPC
[sigmove 18:45:22 DEBUG] transformed Y334Mc.SPC -> Y334MC.SPC
[sigmove 18:45:22 DEBUG] transformed Y334Md.SPC -> Y334MD.SPC
[sigmove 18:45:22 DEBUG] transformed Y334Me.SPC -> Y334ME.SPC
[sigmove 18:45:22 DEBUG] transformed Y334Mf.SPC -> Y334MF.SPC
[Status 18:45:22 INFO] data for Y334 transferred to science data processing
[Tidy 18:45:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:45:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:45:22 INFO] resetting WatchDogTimer
[Status 18:45:22 INFO] Starting Set [AERI set: name Z334, 6 scans, 0 angle, D16300 command]
[Ingest 18:45:22 INFO] Sending XML status message
[Status 18:45:23 INFO] Mirror angle: 0
[Mirror 18:45:23 INFO] rotating to position Z
[Status 18:45:23 INFO] .SET file for ACQ96 ready
[Ingest 18:45:24 INFO] Starting acquisition
[Status 18:45:24 INFO] reading housekeeping
[Status 18:45:42 INFO] acquire complete
[Status 18:45:43 INFO] writing housekeeping
[Sequencer 18:45:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:45:43 INFO] incremented Z scene to 334 completed views
[Sequencer 18:45:43 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:45:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:45:43 INFO] incremented to [AERI set: name H335, 6 scans, 60 angle, D22500 command] set
[sigmove 18:45:43 INFO] Z334.SIG(18)
[sigmove 18:45:43 DEBUG] transformed Z334Ma.SPC -> Z334MA.SPC
[sigmove 18:45:43 DEBUG] transformed Z334Mb.SPC -> Z334MB.SPC
[sigmove 18:45:43 DEBUG] transformed Z334Mc.SPC -> Z334MC.SPC
[sigmove 18:45:43 DEBUG] transformed Z334Md.SPC -> Z334MD.SPC
[sigmove 18:45:43 DEBUG] transformed Z334Me.SPC -> Z334ME.SPC
[sigmove 18:45:43 DEBUG] transformed Z334Mf.SPC -> Z334MF.SPC
[Status 18:45:43 INFO] data for Z334 transferred to science data processing
[Tidy 18:45:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:45:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:45:43 INFO] resetting WatchDogTimer
[Status 18:45:44 INFO] Starting Set [AERI set: name H335, 6 scans, 60 angle, D22500 command]
[Ingest 18:45:44 INFO] Sending XML status message
[Status 18:45:44 INFO] Mirror angle: 60
[Mirror 18:45:44 INFO] rotating to position H
[Status 18:45:45 INFO] .SET file for ACQ96 ready
[Ingest 18:45:46 INFO] Starting acquisition
[Status 18:45:46 INFO] reading housekeeping
[Status 18:46:04 INFO] acquire complete
[Status 18:46:05 INFO] writing housekeeping
[Sequencer 18:46:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:46:05 INFO] incremented H scene to 335 completed views
[Sequencer 18:46:05 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:46:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:46:05 INFO] incremented to [AERI set: name A335, 6 scans, 120 angle, D28300 command] set
[sigmove 18:46:05 INFO] H335.SIG(18)
[sigmove 18:46:05 DEBUG] transformed H335Ma.SPC -> H335MA.SPC
[sigmove 18:46:05 DEBUG] transformed H335Mb.SPC -> H335MB.SPC
[sigmove 18:46:05 DEBUG] transformed H335Mc.SPC -> H335MC.SPC
[sigmove 18:46:05 DEBUG] transformed H335Md.SPC -> H335MD.SPC
[sigmove 18:46:05 DEBUG] transformed H335Me.SPC -> H335ME.SPC
[sigmove 18:46:05 DEBUG] transformed H335Mf.SPC -> H335MF.SPC
[Status 18:46:05 INFO] data for H335 transferred to science data processing
[Tidy 18:46:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:46:05 INFO] A333.FIN(19),H333.FIN(19),S333.FIN(19),T333.FIN(19),U333.FIN(19),V333.FIN(19),W333.FIN(19),X333.FIN(19),Y333.FIN(19),Z333.FIN(19),A334.FIN(19),H334.FIN(19),S334.FIN(19),T334.FIN(19),U334.FIN(19),V334.FIN(19),W334.FIN(19),X334.FIN(19),Y334.FIN(19),Z334.FIN(19)
[sigmove 18:46:05 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:46:05 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:46:11 DEBUG] done zipping
[WatchDog 18:46:11 INFO] resetting WatchDogTimer
[Status 18:46:11 INFO] Starting Set [AERI set: name A335, 6 scans, 120 angle, D28300 command]
[Ingest 18:46:11 INFO] Sending XML status message
[Status 18:46:11 INFO] Mirror angle: 120
[Mirror 18:46:12 INFO] rotating to position A
[Status 18:46:13 INFO] .SET file for ACQ96 ready
[Ingest 18:46:13 INFO] Starting acquisition
[Status 18:46:14 INFO] reading housekeeping
[Status 18:46:32 INFO] acquire complete
[Status 18:46:33 INFO] writing housekeeping
[Sequencer 18:46:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:46:33 INFO] incremented A scene to 335 completed views
[Sequencer 18:46:33 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:46:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:46:33 INFO] incremented to [AERI set: name S335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:46:33 INFO] A335.SIG(18)
[sigmove 18:46:33 DEBUG] transformed A335Ma.SPC -> A335MA.SPC
[sigmove 18:46:33 DEBUG] transformed A335Mb.SPC -> A335MB.SPC
[sigmove 18:46:33 DEBUG] transformed A335Mc.SPC -> A335MC.SPC
[sigmove 18:46:33 DEBUG] transformed A335Md.SPC -> A335MD.SPC
[sigmove 18:46:33 DEBUG] transformed A335Me.SPC -> A335ME.SPC
[sigmove 18:46:33 DEBUG] transformed A335Mf.SPC -> A335MF.SPC
[Status 18:46:33 INFO] data for A335 transferred to science data processing
[Tidy 18:46:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:46:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:46:33 INFO] resetting WatchDogTimer
[Status 18:46:33 INFO] Starting Set [AERI set: name S335, 6 scans, 0 angle, D16300 command]
[Ingest 18:46:33 INFO] Sending XML status message
[Status 18:46:33 INFO] Mirror angle: 0
[Mirror 18:46:34 INFO] rotating to position S
[Status 18:46:35 INFO] .SET file for ACQ96 ready
[Ingest 18:46:35 INFO] Starting acquisition
[Status 18:46:36 INFO] reading housekeeping
[Status 18:46:54 INFO] acquire complete
[Status 18:46:55 INFO] writing housekeeping
[Sequencer 18:46:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:46:55 INFO] incremented S scene to 335 completed views
[Sequencer 18:46:55 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:46:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:46:55 INFO] incremented to [AERI set: name T335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:46:55 INFO] S335.SIG(18)
[sigmove 18:46:55 DEBUG] transformed S335Ma.SPC -> S335MA.SPC
[sigmove 18:46:55 DEBUG] transformed S335Mb.SPC -> S335MB.SPC
[sigmove 18:46:55 DEBUG] transformed S335Mc.SPC -> S335MC.SPC
[sigmove 18:46:55 DEBUG] transformed S335Md.SPC -> S335MD.SPC
[sigmove 18:46:55 DEBUG] transformed S335Me.SPC -> S335ME.SPC
[sigmove 18:46:55 DEBUG] transformed S335Mf.SPC -> S335MF.SPC
[Status 18:46:55 INFO] data for S335 transferred to science data processing
[Tidy 18:46:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:46:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:46:55 INFO] resetting WatchDogTimer
[Status 18:46:56 INFO] Starting Set [AERI set: name T335, 6 scans, 0 angle, D16300 command]
[Ingest 18:46:56 INFO] Sending XML status message
[Status 18:46:56 INFO] Mirror angle: 0
[Mirror 18:46:56 INFO] rotating to position T
[Status 18:46:57 INFO] .SET file for ACQ96 ready
[Ingest 18:46:57 INFO] Starting acquisition
[Status 18:46:57 INFO] reading housekeeping
[Status 18:47:15 INFO] acquire complete
[Status 18:47:16 INFO] writing housekeeping
[Sequencer 18:47:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:47:16 INFO] incremented T scene to 335 completed views
[Sequencer 18:47:16 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:47:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:47:16 INFO] incremented to [AERI set: name U335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:47:16 INFO] T335.SIG(18)
[sigmove 18:47:16 DEBUG] transformed T335Ma.SPC -> T335MA.SPC
[sigmove 18:47:16 DEBUG] transformed T335Mb.SPC -> T335MB.SPC
[sigmove 18:47:16 DEBUG] transformed T335Mc.SPC -> T335MC.SPC
[sigmove 18:47:17 DEBUG] transformed T335Md.SPC -> T335MD.SPC
[sigmove 18:47:17 DEBUG] transformed T335Me.SPC -> T335ME.SPC
[sigmove 18:47:17 DEBUG] transformed T335Mf.SPC -> T335MF.SPC
[Status 18:47:17 INFO] data for T335 transferred to science data processing
[Tidy 18:47:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:47:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:47:17 INFO] resetting WatchDogTimer
[Status 18:47:17 INFO] Starting Set [AERI set: name U335, 6 scans, 0 angle, D16300 command]
[Ingest 18:47:17 INFO] Sending XML status message
[Status 18:47:17 INFO] Mirror angle: 0
[Mirror 18:47:18 INFO] rotating to position U
[Status 18:47:19 INFO] .SET file for ACQ96 ready
[Ingest 18:47:19 INFO] Starting acquisition
[Status 18:47:20 INFO] reading housekeeping
[Status 18:47:37 INFO] acquire complete
[Status 18:47:38 INFO] writing housekeeping
[Sequencer 18:47:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:47:38 INFO] incremented U scene to 335 completed views
[Sequencer 18:47:38 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:47:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:47:38 INFO] incremented to [AERI set: name V335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:47:38 INFO] U335.SIG(18)
[sigmove 18:47:38 DEBUG] transformed U335Ma.SPC -> U335MA.SPC
[sigmove 18:47:38 DEBUG] transformed U335Mb.SPC -> U335MB.SPC
[sigmove 18:47:38 DEBUG] transformed U335Mc.SPC -> U335MC.SPC
[sigmove 18:47:38 DEBUG] transformed U335Md.SPC -> U335MD.SPC
[sigmove 18:47:38 DEBUG] transformed U335Me.SPC -> U335ME.SPC
[sigmove 18:47:38 DEBUG] transformed U335Mf.SPC -> U335MF.SPC
[Status 18:47:38 INFO] data for U335 transferred to science data processing
[Tidy 18:47:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:47:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:47:38 INFO] resetting WatchDogTimer
[Status 18:47:38 INFO] Starting Set [AERI set: name V335, 6 scans, 0 angle, D16300 command]
[Ingest 18:47:38 INFO] Sending XML status message
[Status 18:47:38 INFO] Mirror angle: 0
[Mirror 18:47:39 INFO] rotating to position V
[Status 18:47:39 INFO] .SET file for ACQ96 ready
[Ingest 18:47:40 INFO] Starting acquisition
[Status 18:47:40 INFO] reading housekeeping
[Status 18:47:58 INFO] acquire complete
[Status 18:47:59 INFO] writing housekeeping
[Sequencer 18:47:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:47:59 INFO] incremented V scene to 335 completed views
[Sequencer 18:47:59 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:47:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:47:59 INFO] incremented to [AERI set: name W335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:47:59 INFO] V335.SIG(18)
[sigmove 18:47:59 DEBUG] transformed V335Ma.SPC -> V335MA.SPC
[sigmove 18:47:59 DEBUG] transformed V335Mb.SPC -> V335MB.SPC
[sigmove 18:47:59 DEBUG] transformed V335Mc.SPC -> V335MC.SPC
[sigmove 18:47:59 DEBUG] transformed V335Md.SPC -> V335MD.SPC
[sigmove 18:47:59 DEBUG] transformed V335Me.SPC -> V335ME.SPC
[sigmove 18:47:59 DEBUG] transformed V335Mf.SPC -> V335MF.SPC
[Status 18:47:59 INFO] data for V335 transferred to science data processing
[Tidy 18:47:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:47:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:47:59 INFO] resetting WatchDogTimer
[Status 18:48:00 INFO] Starting Set [AERI set: name W335, 6 scans, 0 angle, D16300 command]
[Ingest 18:48:00 INFO] Sending XML status message
[Status 18:48:00 INFO] Mirror angle: 0
[Mirror 18:48:00 INFO] rotating to position W
[Status 18:48:00 INFO] .SET file for ACQ96 ready
[Ingest 18:48:01 INFO] Starting acquisition
[Status 18:48:01 INFO] reading housekeeping
[Status 18:48:19 INFO] acquire complete
[Status 18:48:20 INFO] writing housekeeping
[Sequencer 18:48:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:48:20 INFO] incremented W scene to 335 completed views
[Sequencer 18:48:20 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:48:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:48:20 INFO] incremented to [AERI set: name X335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:48:20 INFO] W335.SIG(18)
[sigmove 18:48:20 DEBUG] transformed W335Ma.SPC -> W335MA.SPC
[sigmove 18:48:20 DEBUG] transformed W335Mb.SPC -> W335MB.SPC
[sigmove 18:48:20 DEBUG] transformed W335Mc.SPC -> W335MC.SPC
[sigmove 18:48:20 DEBUG] transformed W335Md.SPC -> W335MD.SPC
[sigmove 18:48:20 DEBUG] transformed W335Me.SPC -> W335ME.SPC
[sigmove 18:48:20 DEBUG] transformed W335Mf.SPC -> W335MF.SPC
[Status 18:48:20 INFO] data for W335 transferred to science data processing
[Tidy 18:48:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:48:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:48:20 INFO] resetting WatchDogTimer
[Status 18:48:21 INFO] Starting Set [AERI set: name X335, 6 scans, 0 angle, D16300 command]
[Ingest 18:48:21 INFO] Sending XML status message
[Status 18:48:21 INFO] Mirror angle: 0
[Mirror 18:48:21 INFO] rotating to position X
[Status 18:48:22 INFO] .SET file for ACQ96 ready
[Ingest 18:48:22 INFO] Starting acquisition
[Status 18:48:23 INFO] reading housekeeping
[Status 18:48:41 INFO] acquire complete
[Status 18:48:42 INFO] writing housekeeping
[Sequencer 18:48:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:48:42 INFO] incremented X scene to 335 completed views
[Sequencer 18:48:42 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:48:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:48:42 INFO] incremented to [AERI set: name Y335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:48:42 INFO] X335.SIG(18)
[sigmove 18:48:42 DEBUG] transformed X335Ma.SPC -> X335MA.SPC
[sigmove 18:48:42 DEBUG] transformed X335Mb.SPC -> X335MB.SPC
[sigmove 18:48:42 DEBUG] transformed X335Mc.SPC -> X335MC.SPC
[sigmove 18:48:42 DEBUG] transformed X335Md.SPC -> X335MD.SPC
[sigmove 18:48:42 DEBUG] transformed X335Me.SPC -> X335ME.SPC
[sigmove 18:48:42 DEBUG] transformed X335Mf.SPC -> X335MF.SPC
[Status 18:48:42 INFO] data for X335 transferred to science data processing
[Tidy 18:48:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:48:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:48:42 INFO] resetting WatchDogTimer
[Status 18:48:42 INFO] Starting Set [AERI set: name Y335, 6 scans, 0 angle, D16300 command]
[Ingest 18:48:42 INFO] Sending XML status message
[Status 18:48:42 INFO] Mirror angle: 0
[Mirror 18:48:43 INFO] rotating to position Y
[Status 18:48:43 INFO] .SET file for ACQ96 ready
[Ingest 18:48:43 INFO] Starting acquisition
[Status 18:48:44 INFO] reading housekeeping
[Status 18:49:02 INFO] acquire complete
[Status 18:49:03 INFO] writing housekeeping
[Sequencer 18:49:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:49:03 INFO] incremented Y scene to 335 completed views
[Sequencer 18:49:03 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:49:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:49:03 INFO] incremented to [AERI set: name Z335, 6 scans, 0 angle, D16300 command] set
[sigmove 18:49:03 INFO] Y335.SIG(18)
[sigmove 18:49:03 DEBUG] transformed Y335Ma.SPC -> Y335MA.SPC
[sigmove 18:49:03 DEBUG] transformed Y335Mb.SPC -> Y335MB.SPC
[sigmove 18:49:03 DEBUG] transformed Y335Mc.SPC -> Y335MC.SPC
[sigmove 18:49:03 DEBUG] transformed Y335Md.SPC -> Y335MD.SPC
[sigmove 18:49:03 DEBUG] transformed Y335Me.SPC -> Y335ME.SPC
[sigmove 18:49:03 DEBUG] transformed Y335Mf.SPC -> Y335MF.SPC
[Status 18:49:03 INFO] data for Y335 transferred to science data processing
[Tidy 18:49:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:49:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:49:03 INFO] resetting WatchDogTimer
[Status 18:49:03 INFO] Starting Set [AERI set: name Z335, 6 scans, 0 angle, D16300 command]
[Ingest 18:49:03 INFO] Sending XML status message
[Status 18:49:03 INFO] Mirror angle: 0
[Mirror 18:49:04 INFO] rotating to position Z
[Status 18:49:04 INFO] .SET file for ACQ96 ready
[Ingest 18:49:05 INFO] Starting acquisition
[Status 18:49:05 INFO] reading housekeeping
[Status 18:49:23 INFO] acquire complete
[Status 18:49:24 INFO] writing housekeeping
[Sequencer 18:49:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:49:24 INFO] incremented Z scene to 335 completed views
[Sequencer 18:49:24 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:49:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:49:24 INFO] incremented to [AERI set: name A336, 6 scans, 120 angle, D28300 command] set
[sigmove 18:49:24 INFO] Z335.SIG(18)
[sigmove 18:49:24 DEBUG] transformed Z335Ma.SPC -> Z335MA.SPC
[sigmove 18:49:24 DEBUG] transformed Z335Mb.SPC -> Z335MB.SPC
[sigmove 18:49:24 DEBUG] transformed Z335Mc.SPC -> Z335MC.SPC
[sigmove 18:49:24 DEBUG] transformed Z335Md.SPC -> Z335MD.SPC
[sigmove 18:49:24 DEBUG] transformed Z335Me.SPC -> Z335ME.SPC
[sigmove 18:49:24 DEBUG] transformed Z335Mf.SPC -> Z335MF.SPC
[Status 18:49:24 INFO] data for Z335 transferred to science data processing
[Tidy 18:49:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:49:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:49:24 INFO] resetting WatchDogTimer
[Status 18:49:25 INFO] Starting Set [AERI set: name A336, 6 scans, 120 angle, D28300 command]
[Ingest 18:49:25 INFO] Sending XML status message
[Status 18:49:25 INFO] Mirror angle: 120
[Mirror 18:49:25 INFO] rotating to position A
[Status 18:49:27 INFO] .SET file for ACQ96 ready
[Ingest 18:49:27 INFO] Starting acquisition
[Status 18:49:27 INFO] reading housekeeping
[Status 18:49:46 INFO] acquire complete
[Status 18:49:47 INFO] writing housekeeping
[Sequencer 18:49:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:49:47 INFO] incremented A scene to 336 completed views
[Sequencer 18:49:47 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:49:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:49:47 INFO] incremented to [AERI set: name H336, 6 scans, 60 angle, D22500 command] set
[sigmove 18:49:47 INFO] A336.SIG(18)
[sigmove 18:49:47 DEBUG] transformed A336Ma.SPC -> A336MA.SPC
[sigmove 18:49:47 DEBUG] transformed A336Mb.SPC -> A336MB.SPC
[sigmove 18:49:47 DEBUG] transformed A336Mc.SPC -> A336MC.SPC
[sigmove 18:49:47 DEBUG] transformed A336Md.SPC -> A336MD.SPC
[sigmove 18:49:47 DEBUG] transformed A336Me.SPC -> A336ME.SPC
[sigmove 18:49:47 DEBUG] transformed A336Mf.SPC -> A336MF.SPC
[Status 18:49:47 INFO] data for A336 transferred to science data processing
[Tidy 18:49:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:49:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:49:47 INFO] resetting WatchDogTimer
[Status 18:49:47 INFO] Starting Set [AERI set: name H336, 6 scans, 60 angle, D22500 command]
[Ingest 18:49:47 INFO] Sending XML status message
[Status 18:49:47 INFO] Mirror angle: 60
[Mirror 18:49:48 INFO] rotating to position H
[Status 18:49:49 INFO] .SET file for ACQ96 ready
[Ingest 18:49:49 INFO] Starting acquisition
[Status 18:49:49 INFO] reading housekeeping
[Status 18:50:07 INFO] acquire complete
[Status 18:50:08 INFO] writing housekeeping
[Sequencer 18:50:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:50:08 INFO] incremented H scene to 336 completed views
[Sequencer 18:50:08 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:50:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:50:08 INFO] incremented to [AERI set: name S336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:50:08 INFO] H336.SIG(18)
[sigmove 18:50:08 DEBUG] transformed H336Ma.SPC -> H336MA.SPC
[sigmove 18:50:08 DEBUG] transformed H336Mb.SPC -> H336MB.SPC
[sigmove 18:50:08 DEBUG] transformed H336Mc.SPC -> H336MC.SPC
[sigmove 18:50:08 DEBUG] transformed H336Md.SPC -> H336MD.SPC
[sigmove 18:50:08 DEBUG] transformed H336Me.SPC -> H336ME.SPC
[sigmove 18:50:08 DEBUG] transformed H336Mf.SPC -> H336MF.SPC
[Status 18:50:08 INFO] data for H336 transferred to science data processing
[Tidy 18:50:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:50:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:50:08 INFO] resetting WatchDogTimer
[Status 18:50:09 INFO] Starting Set [AERI set: name S336, 6 scans, 0 angle, D16300 command]
[Ingest 18:50:09 INFO] Sending XML status message
[Status 18:50:09 INFO] Mirror angle: 0
[Mirror 18:50:09 INFO] rotating to position S
[Status 18:50:10 INFO] .SET file for ACQ96 ready
[Ingest 18:50:10 INFO] Starting acquisition
[Status 18:50:11 INFO] reading housekeeping
[Status 18:50:28 INFO] acquire complete
[Status 18:50:29 INFO] writing housekeeping
[Sequencer 18:50:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:50:29 INFO] incremented S scene to 336 completed views
[Sequencer 18:50:29 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:50:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:50:29 INFO] incremented to [AERI set: name T336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:50:29 INFO] S336.SIG(18)
[sigmove 18:50:29 DEBUG] transformed S336Ma.SPC -> S336MA.SPC
[sigmove 18:50:29 DEBUG] transformed S336Mb.SPC -> S336MB.SPC
[sigmove 18:50:29 DEBUG] transformed S336Mc.SPC -> S336MC.SPC
[sigmove 18:50:29 DEBUG] transformed S336Md.SPC -> S336MD.SPC
[sigmove 18:50:29 DEBUG] transformed S336Me.SPC -> S336ME.SPC
[sigmove 18:50:29 DEBUG] transformed S336Mf.SPC -> S336MF.SPC
[Status 18:50:29 INFO] data for S336 transferred to science data processing
[Tidy 18:50:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:50:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:50:29 INFO] resetting WatchDogTimer
[Status 18:50:30 INFO] Starting Set [AERI set: name T336, 6 scans, 0 angle, D16300 command]
[Ingest 18:50:30 INFO] Sending XML status message
[Status 18:50:30 INFO] Mirror angle: 0
[Mirror 18:50:30 INFO] rotating to position T
[Status 18:50:31 INFO] .SET file for ACQ96 ready
[Ingest 18:50:31 INFO] Starting acquisition
[Status 18:50:32 INFO] reading housekeeping
[Status 18:50:50 INFO] acquire complete
[Status 18:50:51 INFO] writing housekeeping
[Sequencer 18:50:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:50:51 INFO] incremented T scene to 336 completed views
[Sequencer 18:50:51 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:50:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:50:51 INFO] incremented to [AERI set: name U336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:50:51 INFO] T336.SIG(18)
[sigmove 18:50:51 DEBUG] transformed T336Ma.SPC -> T336MA.SPC
[sigmove 18:50:51 DEBUG] transformed T336Mb.SPC -> T336MB.SPC
[sigmove 18:50:51 DEBUG] transformed T336Mc.SPC -> T336MC.SPC
[sigmove 18:50:51 DEBUG] transformed T336Md.SPC -> T336MD.SPC
[sigmove 18:50:51 DEBUG] transformed T336Me.SPC -> T336ME.SPC
[sigmove 18:50:51 DEBUG] transformed T336Mf.SPC -> T336MF.SPC
[Status 18:50:51 INFO] data for T336 transferred to science data processing
[Tidy 18:50:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:50:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:50:51 INFO] resetting WatchDogTimer
[Status 18:50:51 INFO] Starting Set [AERI set: name U336, 6 scans, 0 angle, D16300 command]
[Ingest 18:50:51 INFO] Sending XML status message
[Status 18:50:51 INFO] Mirror angle: 0
[Mirror 18:50:52 INFO] rotating to position U
[Status 18:50:52 INFO] .SET file for ACQ96 ready
[Ingest 18:50:53 INFO] Starting acquisition
[Status 18:50:53 INFO] reading housekeeping
[Status 18:51:11 INFO] acquire complete
[Status 18:51:12 INFO] writing housekeeping
[Sequencer 18:51:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:51:12 INFO] incremented U scene to 336 completed views
[Sequencer 18:51:12 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:51:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:51:12 INFO] incremented to [AERI set: name V336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:51:12 INFO] U336.SIG(18)
[sigmove 18:51:12 DEBUG] transformed U336Ma.SPC -> U336MA.SPC
[sigmove 18:51:12 DEBUG] transformed U336Mb.SPC -> U336MB.SPC
[sigmove 18:51:12 DEBUG] transformed U336Mc.SPC -> U336MC.SPC
[sigmove 18:51:12 DEBUG] transformed U336Md.SPC -> U336MD.SPC
[sigmove 18:51:12 DEBUG] transformed U336Me.SPC -> U336ME.SPC
[sigmove 18:51:12 DEBUG] transformed U336Mf.SPC -> U336MF.SPC
[Status 18:51:12 INFO] data for U336 transferred to science data processing
[Tidy 18:51:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:51:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:51:12 INFO] resetting WatchDogTimer
[Status 18:51:12 INFO] Starting Set [AERI set: name V336, 6 scans, 0 angle, D16300 command]
[Ingest 18:51:12 INFO] Sending XML status message
[Status 18:51:12 INFO] Mirror angle: 0
[Mirror 18:51:13 INFO] rotating to position V
[Status 18:51:13 INFO] .SET file for ACQ96 ready
[Ingest 18:51:14 INFO] Starting acquisition
[Status 18:51:14 INFO] reading housekeeping
[Status 18:51:32 INFO] acquire complete
[Status 18:51:33 INFO] writing housekeeping
[Sequencer 18:51:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:51:33 INFO] incremented V scene to 336 completed views
[Sequencer 18:51:33 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:51:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:51:33 INFO] incremented to [AERI set: name W336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:51:33 INFO] V336.SIG(18)
[sigmove 18:51:33 DEBUG] transformed V336Ma.SPC -> V336MA.SPC
[sigmove 18:51:33 DEBUG] transformed V336Mb.SPC -> V336MB.SPC
[sigmove 18:51:33 DEBUG] transformed V336Mc.SPC -> V336MC.SPC
[sigmove 18:51:33 DEBUG] transformed V336Md.SPC -> V336MD.SPC
[sigmove 18:51:33 DEBUG] transformed V336Me.SPC -> V336ME.SPC
[sigmove 18:51:33 DEBUG] transformed V336Mf.SPC -> V336MF.SPC
[Status 18:51:33 INFO] data for V336 transferred to science data processing
[Tidy 18:51:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:51:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:51:33 INFO] resetting WatchDogTimer
[Status 18:51:34 INFO] Starting Set [AERI set: name W336, 6 scans, 0 angle, D16300 command]
[Ingest 18:51:34 INFO] Sending XML status message
[Status 18:51:34 INFO] Mirror angle: 0
[Mirror 18:51:34 INFO] rotating to position W
[Status 18:51:35 INFO] .SET file for ACQ96 ready
[Ingest 18:51:35 INFO] Starting acquisition
[Status 18:51:36 INFO] reading housekeeping
[Status 18:51:54 INFO] acquire complete
[Status 18:51:55 INFO] writing housekeeping
[Sequencer 18:51:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:51:55 INFO] incremented W scene to 336 completed views
[Sequencer 18:51:55 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:51:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:51:55 INFO] incremented to [AERI set: name X336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:51:55 INFO] W336.SIG(18)
[sigmove 18:51:55 DEBUG] transformed W336Ma.SPC -> W336MA.SPC
[sigmove 18:51:55 DEBUG] transformed W336Mb.SPC -> W336MB.SPC
[sigmove 18:51:55 DEBUG] transformed W336Mc.SPC -> W336MC.SPC
[sigmove 18:51:55 DEBUG] transformed W336Md.SPC -> W336MD.SPC
[sigmove 18:51:55 DEBUG] transformed W336Me.SPC -> W336ME.SPC
[sigmove 18:51:55 DEBUG] transformed W336Mf.SPC -> W336MF.SPC
[Status 18:51:55 INFO] data for W336 transferred to science data processing
[Tidy 18:51:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:51:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:51:55 INFO] resetting WatchDogTimer
[Status 18:51:55 INFO] Starting Set [AERI set: name X336, 6 scans, 0 angle, D16300 command]
[Ingest 18:51:55 INFO] Sending XML status message
[Status 18:51:55 INFO] Mirror angle: 0
[Mirror 18:51:55 INFO] rotating to position X
[Status 18:51:56 INFO] .SET file for ACQ96 ready
[Ingest 18:51:56 INFO] Starting acquisition
[Status 18:51:57 INFO] reading housekeeping
[Status 18:52:15 INFO] acquire complete
[Status 18:52:16 INFO] writing housekeeping
[Sequencer 18:52:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:52:16 INFO] incremented X scene to 336 completed views
[Sequencer 18:52:16 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:52:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:52:16 INFO] incremented to [AERI set: name Y336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:52:16 INFO] X336.SIG(18)
[sigmove 18:52:16 DEBUG] transformed X336Ma.SPC -> X336MA.SPC
[sigmove 18:52:16 DEBUG] transformed X336Mb.SPC -> X336MB.SPC
[sigmove 18:52:16 DEBUG] transformed X336Mc.SPC -> X336MC.SPC
[sigmove 18:52:16 DEBUG] transformed X336Md.SPC -> X336MD.SPC
[sigmove 18:52:16 DEBUG] transformed X336Me.SPC -> X336ME.SPC
[sigmove 18:52:16 DEBUG] transformed X336Mf.SPC -> X336MF.SPC
[Status 18:52:16 INFO] data for X336 transferred to science data processing
[Tidy 18:52:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:52:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:52:16 INFO] resetting WatchDogTimer
[Status 18:52:16 INFO] Starting Set [AERI set: name Y336, 6 scans, 0 angle, D16300 command]
[Ingest 18:52:16 INFO] Sending XML status message
[Status 18:52:16 INFO] Mirror angle: 0
[Mirror 18:52:17 INFO] rotating to position Y
[Status 18:52:17 INFO] .SET file for ACQ96 ready
[Ingest 18:52:18 INFO] Starting acquisition
[Status 18:52:18 INFO] reading housekeeping
[Status 18:52:36 INFO] acquire complete
[Status 18:52:37 INFO] writing housekeeping
[Sequencer 18:52:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:52:37 INFO] incremented Y scene to 336 completed views
[Sequencer 18:52:37 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:52:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:52:37 INFO] incremented to [AERI set: name Z336, 6 scans, 0 angle, D16300 command] set
[sigmove 18:52:37 INFO] Y336.SIG(18)
[sigmove 18:52:37 DEBUG] transformed Y336Ma.SPC -> Y336MA.SPC
[sigmove 18:52:37 DEBUG] transformed Y336Mb.SPC -> Y336MB.SPC
[sigmove 18:52:37 DEBUG] transformed Y336Mc.SPC -> Y336MC.SPC
[sigmove 18:52:37 DEBUG] transformed Y336Md.SPC -> Y336MD.SPC
[sigmove 18:52:37 DEBUG] transformed Y336Me.SPC -> Y336ME.SPC
[sigmove 18:52:37 DEBUG] transformed Y336Mf.SPC -> Y336MF.SPC
[Status 18:52:37 INFO] data for Y336 transferred to science data processing
[Tidy 18:52:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:52:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:52:37 INFO] resetting WatchDogTimer
[Status 18:52:38 INFO] Starting Set [AERI set: name Z336, 6 scans, 0 angle, D16300 command]
[Ingest 18:52:38 INFO] Sending XML status message
[Status 18:52:38 INFO] Mirror angle: 0
[Mirror 18:52:38 INFO] rotating to position Z
[Status 18:52:39 INFO] .SET file for ACQ96 ready
[Ingest 18:52:39 INFO] Starting acquisition
[Status 18:52:39 INFO] reading housekeeping
[Status 18:52:58 INFO] acquire complete
[Status 18:52:59 INFO] writing housekeeping
[Sequencer 18:52:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:52:59 INFO] incremented Z scene to 336 completed views
[Sequencer 18:52:59 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:52:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:52:59 INFO] incremented to [AERI set: name H337, 6 scans, 60 angle, D22500 command] set
[sigmove 18:52:59 INFO] Z336.SIG(18)
[sigmove 18:52:59 DEBUG] transformed Z336Ma.SPC -> Z336MA.SPC
[sigmove 18:52:59 DEBUG] transformed Z336Mb.SPC -> Z336MB.SPC
[sigmove 18:52:59 DEBUG] transformed Z336Mc.SPC -> Z336MC.SPC
[sigmove 18:52:59 DEBUG] transformed Z336Md.SPC -> Z336MD.SPC
[sigmove 18:52:59 DEBUG] transformed Z336Me.SPC -> Z336ME.SPC
[sigmove 18:52:59 DEBUG] transformed Z336Mf.SPC -> Z336MF.SPC
[Status 18:52:59 INFO] data for Z336 transferred to science data processing
[Tidy 18:52:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:52:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:52:59 INFO] resetting WatchDogTimer
[Status 18:52:59 INFO] Starting Set [AERI set: name H337, 6 scans, 60 angle, D22500 command]
[Ingest 18:52:59 INFO] Sending XML status message
[Status 18:52:59 INFO] Mirror angle: 60
[Mirror 18:52:59 INFO] rotating to position H
[Status 18:53:01 INFO] .SET file for ACQ96 ready
[Ingest 18:53:01 INFO] Starting acquisition
[Status 18:53:01 INFO] reading housekeeping
[Status 18:53:19 INFO] acquire complete
[Status 18:53:20 INFO] writing housekeeping
[Sequencer 18:53:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:53:20 INFO] incremented H scene to 337 completed views
[Sequencer 18:53:20 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:53:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:53:20 INFO] incremented to [AERI set: name A337, 6 scans, 120 angle, D28300 command] set
[sigmove 18:53:20 INFO] H337.SIG(18)
[sigmove 18:53:20 DEBUG] transformed H337Ma.SPC -> H337MA.SPC
[sigmove 18:53:20 DEBUG] transformed H337Mb.SPC -> H337MB.SPC
[sigmove 18:53:20 DEBUG] transformed H337Mc.SPC -> H337MC.SPC
[sigmove 18:53:20 DEBUG] transformed H337Md.SPC -> H337MD.SPC
[sigmove 18:53:20 DEBUG] transformed H337Me.SPC -> H337ME.SPC
[sigmove 18:53:20 DEBUG] transformed H337Mf.SPC -> H337MF.SPC
[Status 18:53:20 INFO] data for H337 transferred to science data processing
[Tidy 18:53:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:53:20 INFO] A335.FIN(19),H335.FIN(19),S335.FIN(19),T335.FIN(19),U335.FIN(19),V335.FIN(19),W335.FIN(19),X335.FIN(19),Y335.FIN(19),Z335.FIN(19),A336.FIN(19),H336.FIN(19),S336.FIN(19),T336.FIN(19),U336.FIN(19),V336.FIN(19),W336.FIN(19),X336.FIN(19),Y336.FIN(19),Z336.FIN(19)
[sigmove 18:53:20 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:53:20 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 18:53:26 DEBUG] done zipping
[WatchDog 18:53:26 INFO] resetting WatchDogTimer
[Status 18:53:27 INFO] Starting Set [AERI set: name A337, 6 scans, 120 angle, D28300 command]
[Ingest 18:53:27 INFO] Sending XML status message
[Status 18:53:27 INFO] Mirror angle: 120
[Mirror 18:53:27 INFO] rotating to position A
[Status 18:53:28 INFO] .SET file for ACQ96 ready
[Ingest 18:53:28 INFO] Starting acquisition
[Status 18:53:29 INFO] reading housekeeping
[Status 18:53:47 INFO] acquire complete
[Status 18:53:48 INFO] writing housekeeping
[Sequencer 18:53:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:53:48 INFO] incremented A scene to 337 completed views
[Sequencer 18:53:48 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:53:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:53:48 INFO] incremented to [AERI set: name S337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:53:48 INFO] A337.SIG(18)
[sigmove 18:53:48 DEBUG] transformed A337Ma.SPC -> A337MA.SPC
[sigmove 18:53:48 DEBUG] transformed A337Mb.SPC -> A337MB.SPC
[sigmove 18:53:48 DEBUG] transformed A337Mc.SPC -> A337MC.SPC
[sigmove 18:53:48 DEBUG] transformed A337Md.SPC -> A337MD.SPC
[sigmove 18:53:48 DEBUG] transformed A337Me.SPC -> A337ME.SPC
[sigmove 18:53:48 DEBUG] transformed A337Mf.SPC -> A337MF.SPC
[Status 18:53:48 INFO] data for A337 transferred to science data processing
[Tidy 18:53:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:53:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:53:48 INFO] resetting WatchDogTimer
[Status 18:53:48 INFO] Starting Set [AERI set: name S337, 6 scans, 0 angle, D16300 command]
[Ingest 18:53:48 INFO] Sending XML status message
[Status 18:53:48 INFO] Mirror angle: 0
[Mirror 18:53:49 INFO] rotating to position S
[Status 18:53:50 INFO] .SET file for ACQ96 ready
[Ingest 18:53:51 INFO] Starting acquisition
[Status 18:53:51 INFO] reading housekeeping
[Status 18:54:09 INFO] acquire complete
[Status 18:54:10 INFO] writing housekeeping
[Sequencer 18:54:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:54:10 INFO] incremented S scene to 337 completed views
[Sequencer 18:54:10 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:54:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:54:10 INFO] incremented to [AERI set: name T337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:54:10 INFO] S337.SIG(18)
[sigmove 18:54:10 DEBUG] transformed S337Ma.SPC -> S337MA.SPC
[sigmove 18:54:10 DEBUG] transformed S337Mb.SPC -> S337MB.SPC
[sigmove 18:54:10 DEBUG] transformed S337Mc.SPC -> S337MC.SPC
[sigmove 18:54:10 DEBUG] transformed S337Md.SPC -> S337MD.SPC
[sigmove 18:54:10 DEBUG] transformed S337Me.SPC -> S337ME.SPC
[sigmove 18:54:10 DEBUG] transformed S337Mf.SPC -> S337MF.SPC
[Status 18:54:10 INFO] data for S337 transferred to science data processing
[Tidy 18:54:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:54:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:54:10 INFO] resetting WatchDogTimer
[Status 18:54:11 INFO] Starting Set [AERI set: name T337, 6 scans, 0 angle, D16300 command]
[Ingest 18:54:11 INFO] Sending XML status message
[Status 18:54:11 INFO] Mirror angle: 0
[Mirror 18:54:11 INFO] rotating to position T
[Status 18:54:12 INFO] .SET file for ACQ96 ready
[Ingest 18:54:12 INFO] Starting acquisition
[Status 18:54:13 INFO] reading housekeeping
[Status 18:54:31 INFO] acquire complete
[Status 18:54:32 INFO] writing housekeeping
[Sequencer 18:54:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:54:32 INFO] incremented T scene to 337 completed views
[Sequencer 18:54:32 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:54:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:54:32 INFO] incremented to [AERI set: name U337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:54:32 INFO] T337.SIG(18)
[sigmove 18:54:32 DEBUG] transformed T337Ma.SPC -> T337MA.SPC
[sigmove 18:54:32 DEBUG] transformed T337Mb.SPC -> T337MB.SPC
[sigmove 18:54:32 DEBUG] transformed T337Mc.SPC -> T337MC.SPC
[sigmove 18:54:32 DEBUG] transformed T337Md.SPC -> T337MD.SPC
[sigmove 18:54:32 DEBUG] transformed T337Me.SPC -> T337ME.SPC
[sigmove 18:54:32 DEBUG] transformed T337Mf.SPC -> T337MF.SPC
[Status 18:54:32 INFO] data for T337 transferred to science data processing
[Tidy 18:54:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:54:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:54:32 INFO] resetting WatchDogTimer
[Status 18:54:32 INFO] Starting Set [AERI set: name U337, 6 scans, 0 angle, D16300 command]
[Ingest 18:54:32 INFO] Sending XML status message
[Status 18:54:32 INFO] Mirror angle: 0
[Mirror 18:54:33 INFO] rotating to position U
[Status 18:54:33 INFO] .SET file for ACQ96 ready
[Ingest 18:54:33 INFO] Starting acquisition
[Status 18:54:34 INFO] reading housekeeping
[Status 18:54:52 INFO] acquire complete
[Status 18:54:53 INFO] writing housekeeping
[Sequencer 18:54:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:54:53 INFO] incremented U scene to 337 completed views
[Sequencer 18:54:53 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:54:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:54:53 INFO] incremented to [AERI set: name V337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:54:53 INFO] U337.SIG(18)
[sigmove 18:54:53 DEBUG] transformed U337Ma.SPC -> U337MA.SPC
[sigmove 18:54:53 DEBUG] transformed U337Mb.SPC -> U337MB.SPC
[sigmove 18:54:53 DEBUG] transformed U337Mc.SPC -> U337MC.SPC
[sigmove 18:54:53 DEBUG] transformed U337Md.SPC -> U337MD.SPC
[sigmove 18:54:53 DEBUG] transformed U337Me.SPC -> U337ME.SPC
[sigmove 18:54:53 DEBUG] transformed U337Mf.SPC -> U337MF.SPC
[Status 18:54:53 INFO] data for U337 transferred to science data processing
[Tidy 18:54:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:54:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:54:53 INFO] resetting WatchDogTimer
[Status 18:54:53 INFO] Starting Set [AERI set: name V337, 6 scans, 0 angle, D16300 command]
[Ingest 18:54:53 INFO] Sending XML status message
[Status 18:54:53 INFO] Mirror angle: 0
[Mirror 18:54:54 INFO] rotating to position V
[Status 18:54:54 INFO] .SET file for ACQ96 ready
[Ingest 18:54:55 INFO] Starting acquisition
[Status 18:54:55 INFO] reading housekeeping
[Status 18:55:13 INFO] acquire complete
[Status 18:55:14 INFO] writing housekeeping
[Sequencer 18:55:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:55:14 INFO] incremented V scene to 337 completed views
[Sequencer 18:55:14 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:55:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:55:14 INFO] incremented to [AERI set: name W337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:55:14 INFO] V337.SIG(18)
[sigmove 18:55:14 DEBUG] transformed V337Ma.SPC -> V337MA.SPC
[sigmove 18:55:14 DEBUG] transformed V337Mb.SPC -> V337MB.SPC
[sigmove 18:55:14 DEBUG] transformed V337Mc.SPC -> V337MC.SPC
[sigmove 18:55:14 DEBUG] transformed V337Md.SPC -> V337MD.SPC
[sigmove 18:55:14 DEBUG] transformed V337Me.SPC -> V337ME.SPC
[sigmove 18:55:14 DEBUG] transformed V337Mf.SPC -> V337MF.SPC
[Status 18:55:14 INFO] data for V337 transferred to science data processing
[Tidy 18:55:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:55:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:55:14 INFO] resetting WatchDogTimer
[Status 18:55:15 INFO] Starting Set [AERI set: name W337, 6 scans, 0 angle, D16300 command]
[Ingest 18:55:15 INFO] Sending XML status message
[Status 18:55:15 INFO] Mirror angle: 0
[Mirror 18:55:15 INFO] rotating to position W
[Status 18:55:16 INFO] .SET file for ACQ96 ready
[Ingest 18:55:16 INFO] Starting acquisition
[Status 18:55:17 INFO] reading housekeeping
[Status 18:55:35 INFO] acquire complete
[Status 18:55:36 INFO] writing housekeeping
[Sequencer 18:55:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:55:36 INFO] incremented W scene to 337 completed views
[Sequencer 18:55:36 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:55:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:55:36 INFO] incremented to [AERI set: name X337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:55:36 INFO] W337.SIG(18)
[sigmove 18:55:36 DEBUG] transformed W337Ma.SPC -> W337MA.SPC
[sigmove 18:55:36 DEBUG] transformed W337Mb.SPC -> W337MB.SPC
[sigmove 18:55:36 DEBUG] transformed W337Mc.SPC -> W337MC.SPC
[sigmove 18:55:36 DEBUG] transformed W337Md.SPC -> W337MD.SPC
[sigmove 18:55:36 DEBUG] transformed W337Me.SPC -> W337ME.SPC
[sigmove 18:55:36 DEBUG] transformed W337Mf.SPC -> W337MF.SPC
[Status 18:55:36 INFO] data for W337 transferred to science data processing
[Tidy 18:55:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:55:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:55:36 INFO] resetting WatchDogTimer
[Status 18:55:36 INFO] Starting Set [AERI set: name X337, 6 scans, 0 angle, D16300 command]
[Ingest 18:55:36 INFO] Sending XML status message
[Status 18:55:36 INFO] Mirror angle: 0
[Mirror 18:55:36 INFO] rotating to position X
[Status 18:55:37 INFO] .SET file for ACQ96 ready
[Ingest 18:55:37 INFO] Starting acquisition
[Status 18:55:38 INFO] reading housekeeping
[Status 18:55:56 INFO] acquire complete
[Status 18:55:57 INFO] writing housekeeping
[Sequencer 18:55:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:55:57 INFO] incremented X scene to 337 completed views
[Sequencer 18:55:57 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:55:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:55:57 INFO] incremented to [AERI set: name Y337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:55:57 INFO] X337.SIG(18)
[sigmove 18:55:57 DEBUG] transformed X337Ma.SPC -> X337MA.SPC
[sigmove 18:55:57 DEBUG] transformed X337Mb.SPC -> X337MB.SPC
[sigmove 18:55:57 DEBUG] transformed X337Mc.SPC -> X337MC.SPC
[sigmove 18:55:57 DEBUG] transformed X337Md.SPC -> X337MD.SPC
[sigmove 18:55:57 DEBUG] transformed X337Me.SPC -> X337ME.SPC
[sigmove 18:55:57 DEBUG] transformed X337Mf.SPC -> X337MF.SPC
[Status 18:55:57 INFO] data for X337 transferred to science data processing
[Tidy 18:55:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:55:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:55:57 INFO] resetting WatchDogTimer
[Status 18:55:57 INFO] Starting Set [AERI set: name Y337, 6 scans, 0 angle, D16300 command]
[Ingest 18:55:57 INFO] Sending XML status message
[Status 18:55:57 INFO] Mirror angle: 0
[Mirror 18:55:58 INFO] rotating to position Y
[Status 18:55:58 INFO] .SET file for ACQ96 ready
[Ingest 18:55:59 INFO] Starting acquisition
[Status 18:55:59 INFO] reading housekeeping
[Status 18:56:17 INFO] acquire complete
[Status 18:56:18 INFO] writing housekeeping
[Sequencer 18:56:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:56:18 INFO] incremented Y scene to 337 completed views
[Sequencer 18:56:18 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:56:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:56:18 INFO] incremented to [AERI set: name Z337, 6 scans, 0 angle, D16300 command] set
[sigmove 18:56:18 INFO] Y337.SIG(18)
[sigmove 18:56:18 DEBUG] transformed Y337Ma.SPC -> Y337MA.SPC
[sigmove 18:56:18 DEBUG] transformed Y337Mb.SPC -> Y337MB.SPC
[sigmove 18:56:18 DEBUG] transformed Y337Mc.SPC -> Y337MC.SPC
[sigmove 18:56:18 DEBUG] transformed Y337Md.SPC -> Y337MD.SPC
[sigmove 18:56:18 DEBUG] transformed Y337Me.SPC -> Y337ME.SPC
[sigmove 18:56:18 DEBUG] transformed Y337Mf.SPC -> Y337MF.SPC
[Status 18:56:18 INFO] data for Y337 transferred to science data processing
[Tidy 18:56:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:56:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:56:18 INFO] resetting WatchDogTimer
[Status 18:56:19 INFO] Starting Set [AERI set: name Z337, 6 scans, 0 angle, D16300 command]
[Ingest 18:56:19 INFO] Sending XML status message
[Status 18:56:19 INFO] Mirror angle: 0
[Mirror 18:56:19 INFO] rotating to position Z
[Status 18:56:20 INFO] .SET file for ACQ96 ready
[Ingest 18:56:20 INFO] Starting acquisition
[Status 18:56:20 INFO] reading housekeeping
[Status 18:56:38 INFO] acquire complete
[Status 18:56:40 INFO] writing housekeeping
[Sequencer 18:56:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:56:40 INFO] incremented Z scene to 337 completed views
[Sequencer 18:56:40 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 18:56:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:56:40 INFO] incremented to [AERI set: name A338, 6 scans, 120 angle, D28300 command] set
[sigmove 18:56:40 INFO] Z337.SIG(18)
[sigmove 18:56:40 DEBUG] transformed Z337Ma.SPC -> Z337MA.SPC
[sigmove 18:56:40 DEBUG] transformed Z337Mb.SPC -> Z337MB.SPC
[sigmove 18:56:40 DEBUG] transformed Z337Mc.SPC -> Z337MC.SPC
[sigmove 18:56:40 DEBUG] transformed Z337Md.SPC -> Z337MD.SPC
[sigmove 18:56:40 DEBUG] transformed Z337Me.SPC -> Z337ME.SPC
[sigmove 18:56:40 DEBUG] transformed Z337Mf.SPC -> Z337MF.SPC
[Status 18:56:40 INFO] data for Z337 transferred to science data processing
[Tidy 18:56:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:56:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:56:40 INFO] resetting WatchDogTimer
[Status 18:56:40 INFO] Starting Set [AERI set: name A338, 6 scans, 120 angle, D28300 command]
[Ingest 18:56:40 INFO] Sending XML status message
[Status 18:56:40 INFO] Mirror angle: 120
[Mirror 18:56:40 INFO] rotating to position A
[Status 18:56:42 INFO] .SET file for ACQ96 ready
[Ingest 18:56:42 INFO] Starting acquisition
[Status 18:56:43 INFO] reading housekeeping
[Status 18:57:01 INFO] acquire complete
[Status 18:57:02 INFO] writing housekeeping
[Sequencer 18:57:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:57:02 INFO] incremented A scene to 338 completed views
[Sequencer 18:57:02 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 18:57:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:57:02 INFO] incremented to [AERI set: name H338, 6 scans, 60 angle, D22500 command] set
[sigmove 18:57:02 INFO] A338.SIG(18)
[sigmove 18:57:02 DEBUG] transformed A338Ma.SPC -> A338MA.SPC
[sigmove 18:57:02 DEBUG] transformed A338Mb.SPC -> A338MB.SPC
[sigmove 18:57:02 DEBUG] transformed A338Mc.SPC -> A338MC.SPC
[sigmove 18:57:02 DEBUG] transformed A338Md.SPC -> A338MD.SPC
[sigmove 18:57:02 DEBUG] transformed A338Me.SPC -> A338ME.SPC
[sigmove 18:57:02 DEBUG] transformed A338Mf.SPC -> A338MF.SPC
[Status 18:57:02 INFO] data for A338 transferred to science data processing
[Tidy 18:57:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:57:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:57:02 INFO] resetting WatchDogTimer
[Status 18:57:02 INFO] Starting Set [AERI set: name H338, 6 scans, 60 angle, D22500 command]
[Ingest 18:57:02 INFO] Sending XML status message
[Status 18:57:02 INFO] Mirror angle: 60
[Mirror 18:57:03 INFO] rotating to position H
[Status 18:57:04 INFO] .SET file for ACQ96 ready
[Ingest 18:57:04 INFO] Starting acquisition
[Status 18:57:05 INFO] reading housekeeping
[Status 18:57:22 INFO] acquire complete
[Status 18:57:23 INFO] writing housekeeping
[Sequencer 18:57:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:57:23 INFO] incremented H scene to 338 completed views
[Sequencer 18:57:23 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 18:57:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:57:23 INFO] incremented to [AERI set: name S338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:57:23 INFO] H338.SIG(18)
[sigmove 18:57:23 DEBUG] transformed H338Ma.SPC -> H338MA.SPC
[sigmove 18:57:23 DEBUG] transformed H338Mb.SPC -> H338MB.SPC
[sigmove 18:57:23 DEBUG] transformed H338Mc.SPC -> H338MC.SPC
[sigmove 18:57:23 DEBUG] transformed H338Md.SPC -> H338MD.SPC
[sigmove 18:57:23 DEBUG] transformed H338Me.SPC -> H338ME.SPC
[sigmove 18:57:23 DEBUG] transformed H338Mf.SPC -> H338MF.SPC
[Status 18:57:23 INFO] data for H338 transferred to science data processing
[Tidy 18:57:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:57:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:57:23 INFO] resetting WatchDogTimer
[Status 18:57:24 INFO] Starting Set [AERI set: name S338, 6 scans, 0 angle, D16300 command]
[Ingest 18:57:24 INFO] Sending XML status message
[Status 18:57:24 INFO] Mirror angle: 0
[Mirror 18:57:24 INFO] rotating to position S
[Status 18:57:25 INFO] .SET file for ACQ96 ready
[Ingest 18:57:26 INFO] Starting acquisition
[Status 18:57:26 INFO] reading housekeeping
[Status 18:57:44 INFO] acquire complete
[Status 18:57:45 INFO] writing housekeeping
[Sequencer 18:57:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:57:45 INFO] incremented S scene to 338 completed views
[Sequencer 18:57:45 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:57:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:57:45 INFO] incremented to [AERI set: name T338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:57:45 INFO] S338.SIG(18)
[sigmove 18:57:45 DEBUG] transformed S338Ma.SPC -> S338MA.SPC
[sigmove 18:57:45 DEBUG] transformed S338Mb.SPC -> S338MB.SPC
[sigmove 18:57:45 DEBUG] transformed S338Mc.SPC -> S338MC.SPC
[sigmove 18:57:45 DEBUG] transformed S338Md.SPC -> S338MD.SPC
[sigmove 18:57:45 DEBUG] transformed S338Me.SPC -> S338ME.SPC
[sigmove 18:57:45 DEBUG] transformed S338Mf.SPC -> S338MF.SPC
[Status 18:57:45 INFO] data for S338 transferred to science data processing
[Tidy 18:57:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:57:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:57:45 INFO] resetting WatchDogTimer
[Status 18:57:45 INFO] Starting Set [AERI set: name T338, 6 scans, 0 angle, D16300 command]
[Ingest 18:57:45 INFO] Sending XML status message
[Status 18:57:45 INFO] Mirror angle: 0
[Mirror 18:57:45 INFO] rotating to position T
[Status 18:57:46 INFO] .SET file for ACQ96 ready
[Ingest 18:57:46 INFO] Starting acquisition
[Status 18:57:47 INFO] reading housekeeping
[Status 18:58:05 INFO] acquire complete
[Status 18:58:06 INFO] writing housekeeping
[Sequencer 18:58:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:58:06 INFO] incremented T scene to 338 completed views
[Sequencer 18:58:06 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:58:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:58:06 INFO] incremented to [AERI set: name U338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:58:06 INFO] T338.SIG(18)
[sigmove 18:58:06 DEBUG] transformed T338Ma.SPC -> T338MA.SPC
[sigmove 18:58:06 DEBUG] transformed T338Mb.SPC -> T338MB.SPC
[sigmove 18:58:06 DEBUG] transformed T338Mc.SPC -> T338MC.SPC
[sigmove 18:58:06 DEBUG] transformed T338Md.SPC -> T338MD.SPC
[sigmove 18:58:06 DEBUG] transformed T338Me.SPC -> T338ME.SPC
[sigmove 18:58:06 DEBUG] transformed T338Mf.SPC -> T338MF.SPC
[Status 18:58:06 INFO] data for T338 transferred to science data processing
[Tidy 18:58:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:58:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:58:06 INFO] resetting WatchDogTimer
[Status 18:58:06 INFO] Starting Set [AERI set: name U338, 6 scans, 0 angle, D16300 command]
[Ingest 18:58:06 INFO] Sending XML status message
[Status 18:58:06 INFO] Mirror angle: 0
[Mirror 18:58:07 INFO] rotating to position U
[Status 18:58:07 INFO] .SET file for ACQ96 ready
[Ingest 18:58:08 INFO] Starting acquisition
[Status 18:58:08 INFO] reading housekeeping
[Status 18:58:26 INFO] acquire complete
[Status 18:58:27 INFO] writing housekeeping
[Sequencer 18:58:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:58:27 INFO] incremented U scene to 338 completed views
[Sequencer 18:58:27 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:58:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:58:27 INFO] incremented to [AERI set: name V338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:58:27 INFO] U338.SIG(18)
[sigmove 18:58:27 DEBUG] transformed U338Ma.SPC -> U338MA.SPC
[sigmove 18:58:27 DEBUG] transformed U338Mb.SPC -> U338MB.SPC
[sigmove 18:58:27 DEBUG] transformed U338Mc.SPC -> U338MC.SPC
[sigmove 18:58:27 DEBUG] transformed U338Md.SPC -> U338MD.SPC
[sigmove 18:58:27 DEBUG] transformed U338Me.SPC -> U338ME.SPC
[sigmove 18:58:27 DEBUG] transformed U338Mf.SPC -> U338MF.SPC
[Status 18:58:27 INFO] data for U338 transferred to science data processing
[Tidy 18:58:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:58:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:58:27 INFO] resetting WatchDogTimer
[Status 18:58:28 INFO] Starting Set [AERI set: name V338, 6 scans, 0 angle, D16300 command]
[Ingest 18:58:28 INFO] Sending XML status message
[Status 18:58:28 INFO] Mirror angle: 0
[Mirror 18:58:28 INFO] rotating to position V
[Status 18:58:29 INFO] .SET file for ACQ96 ready
[Ingest 18:58:29 INFO] Starting acquisition
[Status 18:58:29 INFO] reading housekeeping
[Status 18:58:47 INFO] acquire complete
[Status 18:58:49 INFO] writing housekeeping
[Sequencer 18:58:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:58:49 INFO] incremented V scene to 338 completed views
[Sequencer 18:58:49 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:58:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:58:49 INFO] incremented to [AERI set: name W338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:58:49 INFO] V338.SIG(18)
[sigmove 18:58:49 DEBUG] transformed V338Ma.SPC -> V338MA.SPC
[sigmove 18:58:49 DEBUG] transformed V338Mb.SPC -> V338MB.SPC
[sigmove 18:58:49 DEBUG] transformed V338Mc.SPC -> V338MC.SPC
[sigmove 18:58:49 DEBUG] transformed V338Md.SPC -> V338MD.SPC
[sigmove 18:58:49 DEBUG] transformed V338Me.SPC -> V338ME.SPC
[sigmove 18:58:49 DEBUG] transformed V338Mf.SPC -> V338MF.SPC
[Status 18:58:49 INFO] data for V338 transferred to science data processing
[Tidy 18:58:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:58:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:58:49 INFO] resetting WatchDogTimer
[Status 18:58:49 INFO] Starting Set [AERI set: name W338, 6 scans, 0 angle, D16300 command]
[Ingest 18:58:49 INFO] Sending XML status message
[Status 18:58:49 INFO] Mirror angle: 0
[Mirror 18:58:49 INFO] rotating to position W
[Status 18:58:50 INFO] .SET file for ACQ96 ready
[Ingest 18:58:50 INFO] Starting acquisition
[Status 18:58:51 INFO] reading housekeeping
[Status 18:59:09 INFO] acquire complete
[Status 18:59:10 INFO] writing housekeeping
[Sequencer 18:59:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:59:10 INFO] incremented W scene to 338 completed views
[Sequencer 18:59:10 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:59:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:59:10 INFO] incremented to [AERI set: name X338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:59:10 INFO] W338.SIG(18)
[sigmove 18:59:10 DEBUG] transformed W338Ma.SPC -> W338MA.SPC
[sigmove 18:59:10 DEBUG] transformed W338Mb.SPC -> W338MB.SPC
[sigmove 18:59:10 DEBUG] transformed W338Mc.SPC -> W338MC.SPC
[sigmove 18:59:10 DEBUG] transformed W338Md.SPC -> W338MD.SPC
[sigmove 18:59:10 DEBUG] transformed W338Me.SPC -> W338ME.SPC
[sigmove 18:59:10 DEBUG] transformed W338Mf.SPC -> W338MF.SPC
[Status 18:59:10 INFO] data for W338 transferred to science data processing
[Tidy 18:59:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:59:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:59:10 INFO] resetting WatchDogTimer
[Status 18:59:10 INFO] Starting Set [AERI set: name X338, 6 scans, 0 angle, D16300 command]
[Ingest 18:59:10 INFO] Sending XML status message
[Status 18:59:10 INFO] Mirror angle: 0
[Mirror 18:59:11 INFO] rotating to position X
[Status 18:59:11 INFO] .SET file for ACQ96 ready
[Ingest 18:59:12 INFO] Starting acquisition
[Status 18:59:12 INFO] reading housekeeping
[Status 18:59:30 INFO] acquire complete
[Status 18:59:31 INFO] writing housekeeping
[Sequencer 18:59:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:59:31 INFO] incremented X scene to 338 completed views
[Sequencer 18:59:31 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:59:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:59:31 INFO] incremented to [AERI set: name Y338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:59:31 INFO] X338.SIG(18)
[sigmove 18:59:31 DEBUG] transformed X338Ma.SPC -> X338MA.SPC
[sigmove 18:59:31 DEBUG] transformed X338Mb.SPC -> X338MB.SPC
[sigmove 18:59:31 DEBUG] transformed X338Mc.SPC -> X338MC.SPC
[sigmove 18:59:31 DEBUG] transformed X338Md.SPC -> X338MD.SPC
[sigmove 18:59:31 DEBUG] transformed X338Me.SPC -> X338ME.SPC
[sigmove 18:59:31 DEBUG] transformed X338Mf.SPC -> X338MF.SPC
[Status 18:59:31 INFO] data for X338 transferred to science data processing
[Tidy 18:59:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:59:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:59:31 INFO] resetting WatchDogTimer
[Status 18:59:32 INFO] Starting Set [AERI set: name Y338, 6 scans, 0 angle, D16300 command]
[Ingest 18:59:32 INFO] Sending XML status message
[Status 18:59:32 INFO] Mirror angle: 0
[Mirror 18:59:32 INFO] rotating to position Y
[Status 18:59:33 INFO] .SET file for ACQ96 ready
[Ingest 18:59:33 INFO] Starting acquisition
[Status 18:59:33 INFO] reading housekeeping
[Status 18:59:51 INFO] acquire complete
[Status 18:59:52 INFO] writing housekeeping
[Sequencer 18:59:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 18:59:52 INFO] incremented Y scene to 338 completed views
[Sequencer 18:59:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 18:59:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 18:59:52 INFO] incremented to [AERI set: name Z338, 6 scans, 0 angle, D16300 command] set
[sigmove 18:59:52 INFO] Y338.SIG(18)
[sigmove 18:59:52 DEBUG] transformed Y338Ma.SPC -> Y338MA.SPC
[sigmove 18:59:52 DEBUG] transformed Y338Mb.SPC -> Y338MB.SPC
[sigmove 18:59:52 DEBUG] transformed Y338Mc.SPC -> Y338MC.SPC
[sigmove 18:59:52 DEBUG] transformed Y338Md.SPC -> Y338MD.SPC
[sigmove 18:59:52 DEBUG] transformed Y338Me.SPC -> Y338ME.SPC
[sigmove 18:59:52 DEBUG] transformed Y338Mf.SPC -> Y338MF.SPC
[Status 18:59:52 INFO] data for Y338 transferred to science data processing
[Tidy 18:59:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 18:59:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 18:59:52 INFO] resetting WatchDogTimer
[Status 18:59:53 INFO] Starting Set [AERI set: name Z338, 6 scans, 0 angle, D16300 command]
[Ingest 18:59:53 INFO] Sending XML status message
[Status 18:59:53 INFO] Mirror angle: 0
[Mirror 18:59:53 INFO] rotating to position Z
[Status 18:59:54 INFO] .SET file for ACQ96 ready
[Ingest 18:59:54 INFO] Starting acquisition
[Status 18:59:55 INFO] reading housekeeping
[Status 19:00:13 INFO] acquire complete
[Status 19:00:14 INFO] writing housekeeping
[Sequencer 19:00:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:00:14 INFO] incremented Z scene to 338 completed views
[Sequencer 19:00:14 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:00:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:00:14 INFO] incremented to [AERI set: name H339, 6 scans, 60 angle, D22500 command] set
[sigmove 19:00:14 INFO] Z338.SIG(18)
[sigmove 19:00:14 DEBUG] transformed Z338Ma.SPC -> Z338MA.SPC
[sigmove 19:00:14 DEBUG] transformed Z338Mb.SPC -> Z338MB.SPC
[sigmove 19:00:14 DEBUG] transformed Z338Mc.SPC -> Z338MC.SPC
[sigmove 19:00:14 DEBUG] transformed Z338Md.SPC -> Z338MD.SPC
[sigmove 19:00:14 DEBUG] transformed Z338Me.SPC -> Z338ME.SPC
[sigmove 19:00:14 DEBUG] transformed Z338Mf.SPC -> Z338MF.SPC
[Status 19:00:14 INFO] data for Z338 transferred to science data processing
[Tidy 19:00:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:00:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:00:14 INFO] resetting WatchDogTimer
[Status 19:00:14 INFO] Starting Set [AERI set: name H339, 6 scans, 60 angle, D22500 command]
[Ingest 19:00:14 INFO] Sending XML status message
[Status 19:00:14 INFO] Mirror angle: 60
[Mirror 19:00:15 INFO] rotating to position H
[Status 19:00:16 INFO] .SET file for ACQ96 ready
[Ingest 19:00:16 INFO] Starting acquisition
[Status 19:00:17 INFO] reading housekeeping
[Status 19:00:34 INFO] acquire complete
[Status 19:00:35 INFO] writing housekeeping
[Sequencer 19:00:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:00:35 INFO] incremented H scene to 339 completed views
[Sequencer 19:00:35 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:00:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:00:35 INFO] incremented to [AERI set: name A339, 6 scans, 120 angle, D28300 command] set
[sigmove 19:00:35 INFO] H339.SIG(18)
[sigmove 19:00:35 DEBUG] transformed H339Ma.SPC -> H339MA.SPC
[sigmove 19:00:35 DEBUG] transformed H339Mb.SPC -> H339MB.SPC
[sigmove 19:00:35 DEBUG] transformed H339Mc.SPC -> H339MC.SPC
[sigmove 19:00:35 DEBUG] transformed H339Md.SPC -> H339MD.SPC
[sigmove 19:00:35 DEBUG] transformed H339Me.SPC -> H339ME.SPC
[sigmove 19:00:35 DEBUG] transformed H339Mf.SPC -> H339MF.SPC
[Status 19:00:35 INFO] data for H339 transferred to science data processing
[Tidy 19:00:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:00:35 INFO] A337.FIN(19),H337.FIN(19),S337.FIN(19),T337.FIN(19),U337.FIN(19),V337.FIN(19),W337.FIN(19),X337.FIN(19),Y337.FIN(19),Z337.FIN(19),A338.FIN(19),H338.FIN(19),S338.FIN(19),T338.FIN(19),U338.FIN(19),V338.FIN(19),W338.FIN(19),X338.FIN(19),Y338.FIN(19),Z338.FIN(19)
[sigmove 19:00:35 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:00:35 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:00:41 DEBUG] done zipping
[WatchDog 19:00:41 INFO] resetting WatchDogTimer
[Status 19:00:42 INFO] Starting Set [AERI set: name A339, 6 scans, 120 angle, D28300 command]
[Ingest 19:00:42 INFO] Sending XML status message
[Status 19:00:42 INFO] Mirror angle: 120
[Mirror 19:00:42 INFO] rotating to position A
[Status 19:00:43 INFO] .SET file for ACQ96 ready
[Ingest 19:00:44 INFO] Starting acquisition
[Status 19:00:44 INFO] reading housekeeping
[Status 19:01:02 INFO] acquire complete
[Status 19:01:03 INFO] writing housekeeping
[Sequencer 19:01:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:01:03 INFO] incremented A scene to 339 completed views
[Sequencer 19:01:03 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:01:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:01:03 INFO] incremented to [AERI set: name S339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:01:03 INFO] A339.SIG(18)
[sigmove 19:01:03 DEBUG] transformed A339Ma.SPC -> A339MA.SPC
[sigmove 19:01:03 DEBUG] transformed A339Mb.SPC -> A339MB.SPC
[sigmove 19:01:03 DEBUG] transformed A339Mc.SPC -> A339MC.SPC
[sigmove 19:01:03 DEBUG] transformed A339Md.SPC -> A339MD.SPC
[sigmove 19:01:03 DEBUG] transformed A339Me.SPC -> A339ME.SPC
[sigmove 19:01:03 DEBUG] transformed A339Mf.SPC -> A339MF.SPC
[Status 19:01:03 INFO] data for A339 transferred to science data processing
[Tidy 19:01:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:01:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:01:03 INFO] resetting WatchDogTimer
[Status 19:01:04 INFO] Starting Set [AERI set: name S339, 6 scans, 0 angle, D16300 command]
[Ingest 19:01:04 INFO] Sending XML status message
[Status 19:01:04 INFO] Mirror angle: 0
[Mirror 19:01:04 INFO] rotating to position S
[Status 19:01:06 INFO] .SET file for ACQ96 ready
[Ingest 19:01:06 INFO] Starting acquisition
[Status 19:01:06 INFO] reading housekeeping
[Status 19:01:25 INFO] acquire complete
[Status 19:01:26 INFO] writing housekeeping
[Sequencer 19:01:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:01:26 INFO] incremented S scene to 339 completed views
[Sequencer 19:01:26 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:01:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:01:26 INFO] incremented to [AERI set: name T339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:01:26 INFO] S339.SIG(18)
[sigmove 19:01:26 DEBUG] transformed S339Ma.SPC -> S339MA.SPC
[sigmove 19:01:26 DEBUG] transformed S339Mb.SPC -> S339MB.SPC
[sigmove 19:01:26 DEBUG] transformed S339Mc.SPC -> S339MC.SPC
[sigmove 19:01:26 DEBUG] transformed S339Md.SPC -> S339MD.SPC
[sigmove 19:01:26 DEBUG] transformed S339Me.SPC -> S339ME.SPC
[sigmove 19:01:26 DEBUG] transformed S339Mf.SPC -> S339MF.SPC
[Status 19:01:26 INFO] data for S339 transferred to science data processing
[Tidy 19:01:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:01:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:01:26 INFO] resetting WatchDogTimer
[Status 19:01:26 INFO] Starting Set [AERI set: name T339, 6 scans, 0 angle, D16300 command]
[Ingest 19:01:26 INFO] Sending XML status message
[Status 19:01:26 INFO] Mirror angle: 0
[Mirror 19:01:26 INFO] rotating to position T
[Status 19:01:27 INFO] .SET file for ACQ96 ready
[Ingest 19:01:27 INFO] Starting acquisition
[Status 19:01:28 INFO] reading housekeeping
[Status 19:01:46 INFO] acquire complete
[Status 19:01:47 INFO] writing housekeeping
[Sequencer 19:01:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:01:47 INFO] incremented T scene to 339 completed views
[Sequencer 19:01:47 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:01:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:01:47 INFO] incremented to [AERI set: name U339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:01:47 INFO] T339.SIG(18)
[sigmove 19:01:47 DEBUG] transformed T339Ma.SPC -> T339MA.SPC
[sigmove 19:01:47 DEBUG] transformed T339Mb.SPC -> T339MB.SPC
[sigmove 19:01:47 DEBUG] transformed T339Mc.SPC -> T339MC.SPC
[sigmove 19:01:47 DEBUG] transformed T339Md.SPC -> T339MD.SPC
[sigmove 19:01:47 DEBUG] transformed T339Me.SPC -> T339ME.SPC
[sigmove 19:01:47 DEBUG] transformed T339Mf.SPC -> T339MF.SPC
[Status 19:01:47 INFO] data for T339 transferred to science data processing
[Tidy 19:01:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:01:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:01:47 INFO] resetting WatchDogTimer
[Status 19:01:47 INFO] Starting Set [AERI set: name U339, 6 scans, 0 angle, D16300 command]
[Ingest 19:01:47 INFO] Sending XML status message
[Status 19:01:47 INFO] Mirror angle: 0
[Mirror 19:01:48 INFO] rotating to position U
[Status 19:01:48 INFO] .SET file for ACQ96 ready
[Ingest 19:01:49 INFO] Starting acquisition
[Status 19:01:49 INFO] reading housekeeping
[Status 19:02:07 INFO] acquire complete
[Status 19:02:08 INFO] writing housekeeping
[Sequencer 19:02:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:02:08 INFO] incremented U scene to 339 completed views
[Sequencer 19:02:08 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:02:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:02:08 INFO] incremented to [AERI set: name V339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:02:08 INFO] U339.SIG(18)
[sigmove 19:02:08 DEBUG] transformed U339Ma.SPC -> U339MA.SPC
[sigmove 19:02:08 DEBUG] transformed U339Mb.SPC -> U339MB.SPC
[sigmove 19:02:08 DEBUG] transformed U339Mc.SPC -> U339MC.SPC
[sigmove 19:02:08 DEBUG] transformed U339Md.SPC -> U339MD.SPC
[sigmove 19:02:08 DEBUG] transformed U339Me.SPC -> U339ME.SPC
[sigmove 19:02:08 DEBUG] transformed U339Mf.SPC -> U339MF.SPC
[Status 19:02:08 INFO] data for U339 transferred to science data processing
[Tidy 19:02:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:02:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:02:08 INFO] resetting WatchDogTimer
[Status 19:02:09 INFO] Starting Set [AERI set: name V339, 6 scans, 0 angle, D16300 command]
[Ingest 19:02:09 INFO] Sending XML status message
[Status 19:02:09 INFO] Mirror angle: 0
[Mirror 19:02:09 INFO] rotating to position V
[Status 19:02:10 INFO] .SET file for ACQ96 ready
[Ingest 19:02:10 INFO] Starting acquisition
[Status 19:02:11 INFO] reading housekeeping
[Status 19:02:28 INFO] acquire complete
[Status 19:02:30 INFO] writing housekeeping
[Sequencer 19:02:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:02:30 INFO] incremented V scene to 339 completed views
[Sequencer 19:02:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:02:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:02:30 INFO] incremented to [AERI set: name W339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:02:30 INFO] V339.SIG(18)
[sigmove 19:02:30 DEBUG] transformed V339Ma.SPC -> V339MA.SPC
[sigmove 19:02:30 DEBUG] transformed V339Mb.SPC -> V339MB.SPC
[sigmove 19:02:30 DEBUG] transformed V339Mc.SPC -> V339MC.SPC
[sigmove 19:02:30 DEBUG] transformed V339Md.SPC -> V339MD.SPC
[sigmove 19:02:30 DEBUG] transformed V339Me.SPC -> V339ME.SPC
[sigmove 19:02:30 DEBUG] transformed V339Mf.SPC -> V339MF.SPC
[Status 19:02:30 INFO] data for V339 transferred to science data processing
[Tidy 19:02:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:02:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:02:30 INFO] resetting WatchDogTimer
[Status 19:02:30 INFO] Starting Set [AERI set: name W339, 6 scans, 0 angle, D16300 command]
[Ingest 19:02:30 INFO] Sending XML status message
[Status 19:02:30 INFO] Mirror angle: 0
[Mirror 19:02:30 INFO] rotating to position W
[Status 19:02:31 INFO] .SET file for ACQ96 ready
[Ingest 19:02:31 INFO] Starting acquisition
[Status 19:02:32 INFO] reading housekeeping
[Status 19:02:50 INFO] acquire complete
[Status 19:02:51 INFO] writing housekeeping
[Sequencer 19:02:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:02:51 INFO] incremented W scene to 339 completed views
[Sequencer 19:02:51 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:02:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:02:51 INFO] incremented to [AERI set: name X339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:02:51 INFO] W339.SIG(18)
[sigmove 19:02:51 DEBUG] transformed W339Ma.SPC -> W339MA.SPC
[sigmove 19:02:51 DEBUG] transformed W339Mb.SPC -> W339MB.SPC
[sigmove 19:02:51 DEBUG] transformed W339Mc.SPC -> W339MC.SPC
[sigmove 19:02:51 DEBUG] transformed W339Md.SPC -> W339MD.SPC
[sigmove 19:02:51 DEBUG] transformed W339Me.SPC -> W339ME.SPC
[sigmove 19:02:51 DEBUG] transformed W339Mf.SPC -> W339MF.SPC
[Status 19:02:51 INFO] data for W339 transferred to science data processing
[Tidy 19:02:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:02:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:02:51 INFO] resetting WatchDogTimer
[Status 19:02:51 INFO] Starting Set [AERI set: name X339, 6 scans, 0 angle, D16300 command]
[Ingest 19:02:51 INFO] Sending XML status message
[Status 19:02:51 INFO] Mirror angle: 0
[Mirror 19:02:52 INFO] rotating to position X
[Status 19:02:52 INFO] .SET file for ACQ96 ready
[Ingest 19:02:53 INFO] Starting acquisition
[Status 19:02:53 INFO] reading housekeeping
[Status 19:03:11 INFO] acquire complete
[Status 19:03:12 INFO] writing housekeeping
[Sequencer 19:03:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:03:12 INFO] incremented X scene to 339 completed views
[Sequencer 19:03:12 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:03:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:03:12 INFO] incremented to [AERI set: name Y339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:03:12 INFO] X339.SIG(18)
[sigmove 19:03:12 DEBUG] transformed X339Ma.SPC -> X339MA.SPC
[sigmove 19:03:12 DEBUG] transformed X339Mb.SPC -> X339MB.SPC
[sigmove 19:03:12 DEBUG] transformed X339Mc.SPC -> X339MC.SPC
[sigmove 19:03:12 DEBUG] transformed X339Md.SPC -> X339MD.SPC
[sigmove 19:03:12 DEBUG] transformed X339Me.SPC -> X339ME.SPC
[sigmove 19:03:12 DEBUG] transformed X339Mf.SPC -> X339MF.SPC
[Status 19:03:12 INFO] data for X339 transferred to science data processing
[Tidy 19:03:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:03:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:03:12 INFO] resetting WatchDogTimer
[Status 19:03:13 INFO] Starting Set [AERI set: name Y339, 6 scans, 0 angle, D16300 command]
[Ingest 19:03:13 INFO] Sending XML status message
[Status 19:03:13 INFO] Mirror angle: 0
[Mirror 19:03:13 INFO] rotating to position Y
[Status 19:03:14 INFO] .SET file for ACQ96 ready
[Ingest 19:03:14 INFO] Starting acquisition
[Status 19:03:14 INFO] reading housekeeping
[Status 19:03:32 INFO] acquire complete
[Status 19:03:33 INFO] writing housekeeping
[Sequencer 19:03:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:03:33 INFO] incremented Y scene to 339 completed views
[Sequencer 19:03:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:03:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:03:33 INFO] incremented to [AERI set: name Z339, 6 scans, 0 angle, D16300 command] set
[sigmove 19:03:33 INFO] Y339.SIG(18)
[sigmove 19:03:34 DEBUG] transformed Y339Ma.SPC -> Y339MA.SPC
[sigmove 19:03:34 DEBUG] transformed Y339Mb.SPC -> Y339MB.SPC
[sigmove 19:03:34 DEBUG] transformed Y339Mc.SPC -> Y339MC.SPC
[sigmove 19:03:34 DEBUG] transformed Y339Md.SPC -> Y339MD.SPC
[sigmove 19:03:34 DEBUG] transformed Y339Me.SPC -> Y339ME.SPC
[sigmove 19:03:34 DEBUG] transformed Y339Mf.SPC -> Y339MF.SPC
[Status 19:03:34 INFO] data for Y339 transferred to science data processing
[Tidy 19:03:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:03:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:03:34 INFO] resetting WatchDogTimer
[Status 19:03:34 INFO] Starting Set [AERI set: name Z339, 6 scans, 0 angle, D16300 command]
[Ingest 19:03:34 INFO] Sending XML status message
[Status 19:03:34 INFO] Mirror angle: 0
[Mirror 19:03:34 INFO] rotating to position Z
[Status 19:03:35 INFO] .SET file for ACQ96 ready
[Ingest 19:03:35 INFO] Starting acquisition
[Status 19:03:36 INFO] reading housekeeping
[Status 19:03:54 INFO] acquire complete
[Status 19:03:55 INFO] writing housekeeping
[Sequencer 19:03:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:03:55 INFO] incremented Z scene to 339 completed views
[Sequencer 19:03:55 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:03:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:03:55 INFO] incremented to [AERI set: name A340, 6 scans, 120 angle, D28300 command] set
[sigmove 19:03:55 INFO] Z339.SIG(18)
[sigmove 19:03:55 DEBUG] transformed Z339Ma.SPC -> Z339MA.SPC
[sigmove 19:03:55 DEBUG] transformed Z339Mb.SPC -> Z339MB.SPC
[sigmove 19:03:55 DEBUG] transformed Z339Mc.SPC -> Z339MC.SPC
[sigmove 19:03:55 DEBUG] transformed Z339Md.SPC -> Z339MD.SPC
[sigmove 19:03:55 DEBUG] transformed Z339Me.SPC -> Z339ME.SPC
[sigmove 19:03:55 DEBUG] transformed Z339Mf.SPC -> Z339MF.SPC
[Status 19:03:55 INFO] data for Z339 transferred to science data processing
[Tidy 19:03:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:03:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:03:55 INFO] resetting WatchDogTimer
[Status 19:03:55 INFO] Starting Set [AERI set: name A340, 6 scans, 120 angle, D28300 command]
[Ingest 19:03:55 INFO] Sending XML status message
[Status 19:03:55 INFO] Mirror angle: 120
[Mirror 19:03:56 INFO] rotating to position A
[Status 19:03:57 INFO] .SET file for ACQ96 ready
[Ingest 19:03:58 INFO] Starting acquisition
[Status 19:03:58 INFO] reading housekeeping
[Status 19:04:16 INFO] acquire complete
[Status 19:04:17 INFO] writing housekeeping
[Sequencer 19:04:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:04:17 INFO] incremented A scene to 340 completed views
[Sequencer 19:04:17 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:04:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:04:17 INFO] incremented to [AERI set: name H340, 6 scans, 60 angle, D22500 command] set
[sigmove 19:04:17 INFO] A340.SIG(18)
[sigmove 19:04:17 DEBUG] transformed A340Ma.SPC -> A340MA.SPC
[sigmove 19:04:17 DEBUG] transformed A340Mb.SPC -> A340MB.SPC
[sigmove 19:04:17 DEBUG] transformed A340Mc.SPC -> A340MC.SPC
[sigmove 19:04:17 DEBUG] transformed A340Md.SPC -> A340MD.SPC
[sigmove 19:04:17 DEBUG] transformed A340Me.SPC -> A340ME.SPC
[sigmove 19:04:17 DEBUG] transformed A340Mf.SPC -> A340MF.SPC
[Status 19:04:17 INFO] data for A340 transferred to science data processing
[Tidy 19:04:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:04:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:04:17 INFO] resetting WatchDogTimer
[Status 19:04:18 INFO] Starting Set [AERI set: name H340, 6 scans, 60 angle, D22500 command]
[Ingest 19:04:18 INFO] Sending XML status message
[Status 19:04:18 INFO] Mirror angle: 60
[Mirror 19:04:18 INFO] rotating to position H
[Status 19:04:19 INFO] .SET file for ACQ96 ready
[Ingest 19:04:19 INFO] Starting acquisition
[Status 19:04:20 INFO] reading housekeeping
[Status 19:04:37 INFO] acquire complete
[Status 19:04:39 INFO] writing housekeeping
[Sequencer 19:04:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:04:39 INFO] incremented H scene to 340 completed views
[Sequencer 19:04:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:04:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:04:39 INFO] incremented to [AERI set: name S340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:04:39 INFO] H340.SIG(18)
[sigmove 19:04:39 DEBUG] transformed H340Ma.SPC -> H340MA.SPC
[sigmove 19:04:39 DEBUG] transformed H340Mb.SPC -> H340MB.SPC
[sigmove 19:04:39 DEBUG] transformed H340Mc.SPC -> H340MC.SPC
[sigmove 19:04:39 DEBUG] transformed H340Md.SPC -> H340MD.SPC
[sigmove 19:04:39 DEBUG] transformed H340Me.SPC -> H340ME.SPC
[sigmove 19:04:39 DEBUG] transformed H340Mf.SPC -> H340MF.SPC
[Status 19:04:39 INFO] data for H340 transferred to science data processing
[Tidy 19:04:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:04:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:04:39 INFO] resetting WatchDogTimer
[Status 19:04:39 INFO] Starting Set [AERI set: name S340, 6 scans, 0 angle, D16300 command]
[Ingest 19:04:39 INFO] Sending XML status message
[Status 19:04:39 INFO] Mirror angle: 0
[Mirror 19:04:39 INFO] rotating to position S
[Status 19:04:41 INFO] .SET file for ACQ96 ready
[Ingest 19:04:41 INFO] Starting acquisition
[Status 19:04:41 INFO] reading housekeeping
[Status 19:04:59 INFO] acquire complete
[Status 19:05:00 INFO] writing housekeeping
[Sequencer 19:05:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:05:00 INFO] incremented S scene to 340 completed views
[Sequencer 19:05:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:05:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:05:00 INFO] incremented to [AERI set: name T340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:05:00 INFO] S340.SIG(18)
[sigmove 19:05:00 DEBUG] transformed S340Ma.SPC -> S340MA.SPC
[sigmove 19:05:00 DEBUG] transformed S340Mb.SPC -> S340MB.SPC
[sigmove 19:05:00 DEBUG] transformed S340Mc.SPC -> S340MC.SPC
[sigmove 19:05:00 DEBUG] transformed S340Md.SPC -> S340MD.SPC
[sigmove 19:05:00 DEBUG] transformed S340Me.SPC -> S340ME.SPC
[sigmove 19:05:00 DEBUG] transformed S340Mf.SPC -> S340MF.SPC
[Status 19:05:00 INFO] data for S340 transferred to science data processing
[Tidy 19:05:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:05:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:05:00 INFO] resetting WatchDogTimer
[Status 19:05:00 INFO] Starting Set [AERI set: name T340, 6 scans, 0 angle, D16300 command]
[Ingest 19:05:00 INFO] Sending XML status message
[Status 19:05:00 INFO] Mirror angle: 0
[Mirror 19:05:01 INFO] rotating to position T
[Status 19:05:01 INFO] .SET file for ACQ96 ready
[Ingest 19:05:02 INFO] Starting acquisition
[Status 19:05:02 INFO] reading housekeeping
[Status 19:05:20 INFO] acquire complete
[Status 19:05:21 INFO] writing housekeeping
[Sequencer 19:05:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:05:21 INFO] incremented T scene to 340 completed views
[Sequencer 19:05:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:05:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:05:21 INFO] incremented to [AERI set: name U340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:05:21 INFO] T340.SIG(18)
[sigmove 19:05:21 DEBUG] transformed T340Ma.SPC -> T340MA.SPC
[sigmove 19:05:21 DEBUG] transformed T340Mb.SPC -> T340MB.SPC
[sigmove 19:05:21 DEBUG] transformed T340Mc.SPC -> T340MC.SPC
[sigmove 19:05:21 DEBUG] transformed T340Md.SPC -> T340MD.SPC
[sigmove 19:05:21 DEBUG] transformed T340Me.SPC -> T340ME.SPC
[sigmove 19:05:21 DEBUG] transformed T340Mf.SPC -> T340MF.SPC
[Status 19:05:21 INFO] data for T340 transferred to science data processing
[Tidy 19:05:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:05:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:05:21 INFO] resetting WatchDogTimer
[Status 19:05:22 INFO] Starting Set [AERI set: name U340, 6 scans, 0 angle, D16300 command]
[Ingest 19:05:22 INFO] Sending XML status message
[Status 19:05:22 INFO] Mirror angle: 0
[Mirror 19:05:22 INFO] rotating to position U
[Status 19:05:23 INFO] .SET file for ACQ96 ready
[Ingest 19:05:23 INFO] Starting acquisition
[Status 19:05:23 INFO] reading housekeeping
[Status 19:05:41 INFO] acquire complete
[Status 19:05:42 INFO] writing housekeeping
[Sequencer 19:05:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:05:42 INFO] incremented U scene to 340 completed views
[Sequencer 19:05:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:05:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:05:42 INFO] incremented to [AERI set: name V340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:05:42 INFO] U340.SIG(18)
[sigmove 19:05:42 DEBUG] transformed U340Ma.SPC -> U340MA.SPC
[sigmove 19:05:42 DEBUG] transformed U340Mb.SPC -> U340MB.SPC
[sigmove 19:05:42 DEBUG] transformed U340Mc.SPC -> U340MC.SPC
[sigmove 19:05:42 DEBUG] transformed U340Md.SPC -> U340MD.SPC
[sigmove 19:05:42 DEBUG] transformed U340Me.SPC -> U340ME.SPC
[sigmove 19:05:42 DEBUG] transformed U340Mf.SPC -> U340MF.SPC
[Status 19:05:42 INFO] data for U340 transferred to science data processing
[Tidy 19:05:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:05:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:05:42 INFO] resetting WatchDogTimer
[Status 19:05:43 INFO] Starting Set [AERI set: name V340, 6 scans, 0 angle, D16300 command]
[Ingest 19:05:43 INFO] Sending XML status message
[Status 19:05:43 INFO] Mirror angle: 0
[Mirror 19:05:43 INFO] rotating to position V
[Status 19:05:44 INFO] .SET file for ACQ96 ready
[Ingest 19:05:44 INFO] Starting acquisition
[Status 19:05:45 INFO] reading housekeeping
[Status 19:06:03 INFO] acquire complete
[Status 19:06:04 INFO] writing housekeeping
[Sequencer 19:06:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:06:04 INFO] incremented V scene to 340 completed views
[Sequencer 19:06:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:06:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:06:04 INFO] incremented to [AERI set: name W340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:06:04 INFO] V340.SIG(18)
[sigmove 19:06:04 DEBUG] transformed V340Ma.SPC -> V340MA.SPC
[sigmove 19:06:04 DEBUG] transformed V340Mb.SPC -> V340MB.SPC
[sigmove 19:06:04 DEBUG] transformed V340Mc.SPC -> V340MC.SPC
[sigmove 19:06:04 DEBUG] transformed V340Md.SPC -> V340MD.SPC
[sigmove 19:06:04 DEBUG] transformed V340Me.SPC -> V340ME.SPC
[sigmove 19:06:04 DEBUG] transformed V340Mf.SPC -> V340MF.SPC
[Status 19:06:04 INFO] data for V340 transferred to science data processing
[Tidy 19:06:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:06:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:06:04 INFO] resetting WatchDogTimer
[Status 19:06:04 INFO] Starting Set [AERI set: name W340, 6 scans, 0 angle, D16300 command]
[Ingest 19:06:04 INFO] Sending XML status message
[Status 19:06:04 INFO] Mirror angle: 0
[Mirror 19:06:05 INFO] rotating to position W
[Status 19:06:05 INFO] .SET file for ACQ96 ready
[Ingest 19:06:06 INFO] Starting acquisition
[Status 19:06:06 INFO] reading housekeeping
[Status 19:06:24 INFO] acquire complete
[Status 19:06:25 INFO] writing housekeeping
[Sequencer 19:06:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:06:25 INFO] incremented W scene to 340 completed views
[Sequencer 19:06:25 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:06:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:06:25 INFO] incremented to [AERI set: name X340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:06:25 INFO] W340.SIG(18)
[sigmove 19:06:25 DEBUG] transformed W340Ma.SPC -> W340MA.SPC
[sigmove 19:06:25 DEBUG] transformed W340Mb.SPC -> W340MB.SPC
[sigmove 19:06:25 DEBUG] transformed W340Mc.SPC -> W340MC.SPC
[sigmove 19:06:25 DEBUG] transformed W340Md.SPC -> W340MD.SPC
[sigmove 19:06:25 DEBUG] transformed W340Me.SPC -> W340ME.SPC
[sigmove 19:06:25 DEBUG] transformed W340Mf.SPC -> W340MF.SPC
[Status 19:06:25 INFO] data for W340 transferred to science data processing
[Tidy 19:06:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:06:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:06:25 INFO] resetting WatchDogTimer
[Status 19:06:25 INFO] Starting Set [AERI set: name X340, 6 scans, 0 angle, D16300 command]
[Ingest 19:06:25 INFO] Sending XML status message
[Status 19:06:26 INFO] Mirror angle: 0
[Mirror 19:06:26 INFO] rotating to position X
[Status 19:06:26 INFO] .SET file for ACQ96 ready
[Ingest 19:06:27 INFO] Starting acquisition
[Status 19:06:27 INFO] reading housekeeping
[Status 19:06:45 INFO] acquire complete
[Status 19:06:46 INFO] writing housekeeping
[Sequencer 19:06:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:06:46 INFO] incremented X scene to 340 completed views
[Sequencer 19:06:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:06:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:06:46 INFO] incremented to [AERI set: name Y340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:06:46 INFO] X340.SIG(18)
[sigmove 19:06:46 DEBUG] transformed X340Ma.SPC -> X340MA.SPC
[sigmove 19:06:46 DEBUG] transformed X340Mb.SPC -> X340MB.SPC
[sigmove 19:06:46 DEBUG] transformed X340Mc.SPC -> X340MC.SPC
[sigmove 19:06:46 DEBUG] transformed X340Md.SPC -> X340MD.SPC
[sigmove 19:06:46 DEBUG] transformed X340Me.SPC -> X340ME.SPC
[sigmove 19:06:46 DEBUG] transformed X340Mf.SPC -> X340MF.SPC
[Status 19:06:46 INFO] data for X340 transferred to science data processing
[Tidy 19:06:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:06:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:06:46 INFO] resetting WatchDogTimer
[Status 19:06:47 INFO] Starting Set [AERI set: name Y340, 6 scans, 0 angle, D16300 command]
[Ingest 19:06:47 INFO] Sending XML status message
[Status 19:06:47 INFO] Mirror angle: 0
[Mirror 19:06:47 INFO] rotating to position Y
[Status 19:06:48 INFO] .SET file for ACQ96 ready
[Ingest 19:06:48 INFO] Starting acquisition
[Status 19:06:49 INFO] reading housekeeping
[Status 19:07:07 INFO] acquire complete
[Status 19:07:08 INFO] writing housekeeping
[Sequencer 19:07:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:07:08 INFO] incremented Y scene to 340 completed views
[Sequencer 19:07:08 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:07:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:07:08 INFO] incremented to [AERI set: name Z340, 6 scans, 0 angle, D16300 command] set
[sigmove 19:07:08 INFO] Y340.SIG(18)
[sigmove 19:07:08 DEBUG] transformed Y340Ma.SPC -> Y340MA.SPC
[sigmove 19:07:08 DEBUG] transformed Y340Mb.SPC -> Y340MB.SPC
[sigmove 19:07:08 DEBUG] transformed Y340Mc.SPC -> Y340MC.SPC
[sigmove 19:07:08 DEBUG] transformed Y340Md.SPC -> Y340MD.SPC
[sigmove 19:07:08 DEBUG] transformed Y340Me.SPC -> Y340ME.SPC
[sigmove 19:07:08 DEBUG] transformed Y340Mf.SPC -> Y340MF.SPC
[Status 19:07:08 INFO] data for Y340 transferred to science data processing
[Tidy 19:07:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:07:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:07:08 INFO] resetting WatchDogTimer
[Status 19:07:08 INFO] Starting Set [AERI set: name Z340, 6 scans, 0 angle, D16300 command]
[Ingest 19:07:08 INFO] Sending XML status message
[Status 19:07:08 INFO] Mirror angle: 0
[Mirror 19:07:09 INFO] rotating to position Z
[Status 19:07:09 INFO] .SET file for ACQ96 ready
[Ingest 19:07:09 INFO] Starting acquisition
[Status 19:07:10 INFO] reading housekeeping
[Status 19:07:28 INFO] acquire complete
[Status 19:07:29 INFO] writing housekeeping
[Sequencer 19:07:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:07:29 INFO] incremented Z scene to 340 completed views
[Sequencer 19:07:29 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:07:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:07:29 INFO] incremented to [AERI set: name H341, 6 scans, 60 angle, D22500 command] set
[sigmove 19:07:29 INFO] Z340.SIG(18)
[sigmove 19:07:29 DEBUG] transformed Z340Ma.SPC -> Z340MA.SPC
[sigmove 19:07:29 DEBUG] transformed Z340Mb.SPC -> Z340MB.SPC
[sigmove 19:07:29 DEBUG] transformed Z340Mc.SPC -> Z340MC.SPC
[sigmove 19:07:29 DEBUG] transformed Z340Md.SPC -> Z340MD.SPC
[sigmove 19:07:29 DEBUG] transformed Z340Me.SPC -> Z340ME.SPC
[sigmove 19:07:29 DEBUG] transformed Z340Mf.SPC -> Z340MF.SPC
[Status 19:07:29 INFO] data for Z340 transferred to science data processing
[Tidy 19:07:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:07:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:07:29 INFO] resetting WatchDogTimer
[Status 19:07:29 INFO] Starting Set [AERI set: name H341, 6 scans, 60 angle, D22500 command]
[Ingest 19:07:29 INFO] Sending XML status message
[Status 19:07:29 INFO] Mirror angle: 60
[Mirror 19:07:30 INFO] rotating to position H
[Status 19:07:31 INFO] .SET file for ACQ96 ready
[Ingest 19:07:31 INFO] Starting acquisition
[Status 19:07:32 INFO] reading housekeeping
[Status 19:07:49 INFO] acquire complete
[Status 19:07:50 INFO] writing housekeeping
[Sequencer 19:07:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:07:50 INFO] incremented H scene to 341 completed views
[Sequencer 19:07:50 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:07:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:07:50 INFO] incremented to [AERI set: name A341, 6 scans, 120 angle, D28300 command] set
[sigmove 19:07:50 INFO] H341.SIG(18)
[sigmove 19:07:50 DEBUG] transformed H341Ma.SPC -> H341MA.SPC
[sigmove 19:07:50 DEBUG] transformed H341Mb.SPC -> H341MB.SPC
[sigmove 19:07:50 DEBUG] transformed H341Mc.SPC -> H341MC.SPC
[sigmove 19:07:50 DEBUG] transformed H341Md.SPC -> H341MD.SPC
[sigmove 19:07:50 DEBUG] transformed H341Me.SPC -> H341ME.SPC
[sigmove 19:07:50 DEBUG] transformed H341Mf.SPC -> H341MF.SPC
[Status 19:07:50 INFO] data for H341 transferred to science data processing
[Tidy 19:07:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:07:50 INFO] A339.FIN(19),H339.FIN(19),S339.FIN(19),T339.FIN(19),U339.FIN(19),V339.FIN(19),W339.FIN(19),X339.FIN(19),Y339.FIN(19),Z339.FIN(19),A340.FIN(19),H340.FIN(19),S340.FIN(19),T340.FIN(19),U340.FIN(19),V340.FIN(19),W340.FIN(19),X340.FIN(19),Y340.FIN(19),Z340.FIN(19)
[sigmove 19:07:50 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:07:50 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:07:56 DEBUG] done zipping
[WatchDog 19:07:57 INFO] resetting WatchDogTimer
[Status 19:07:57 INFO] Starting Set [AERI set: name A341, 6 scans, 120 angle, D28300 command]
[Ingest 19:07:57 INFO] Sending XML status message
[Status 19:07:57 INFO] Mirror angle: 120
[Mirror 19:07:57 INFO] rotating to position A
[Status 19:07:59 INFO] .SET file for ACQ96 ready
[Ingest 19:07:59 INFO] Starting acquisition
[Status 19:07:59 INFO] reading housekeeping
[Status 19:08:17 INFO] acquire complete
[Status 19:08:18 INFO] writing housekeeping
[Sequencer 19:08:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:08:18 INFO] incremented A scene to 341 completed views
[Sequencer 19:08:18 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:08:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:08:18 INFO] incremented to [AERI set: name S341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:08:18 INFO] A341.SIG(18)
[sigmove 19:08:18 DEBUG] transformed A341Ma.SPC -> A341MA.SPC
[sigmove 19:08:18 DEBUG] transformed A341Mb.SPC -> A341MB.SPC
[sigmove 19:08:18 DEBUG] transformed A341Mc.SPC -> A341MC.SPC
[sigmove 19:08:18 DEBUG] transformed A341Md.SPC -> A341MD.SPC
[sigmove 19:08:18 DEBUG] transformed A341Me.SPC -> A341ME.SPC
[sigmove 19:08:18 DEBUG] transformed A341Mf.SPC -> A341MF.SPC
[Status 19:08:18 INFO] data for A341 transferred to science data processing
[Tidy 19:08:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:08:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:08:18 INFO] resetting WatchDogTimer
[Status 19:08:19 INFO] Starting Set [AERI set: name S341, 6 scans, 0 angle, D16300 command]
[Ingest 19:08:19 INFO] Sending XML status message
[Status 19:08:19 INFO] Mirror angle: 0
[Mirror 19:08:19 INFO] rotating to position S
[Status 19:08:21 INFO] .SET file for ACQ96 ready
[Ingest 19:08:21 INFO] Starting acquisition
[Status 19:08:22 INFO] reading housekeeping
[Status 19:08:40 INFO] acquire complete
[Status 19:08:41 INFO] writing housekeeping
[Sequencer 19:08:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:08:41 INFO] incremented S scene to 341 completed views
[Sequencer 19:08:41 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:08:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:08:41 INFO] incremented to [AERI set: name T341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:08:41 INFO] S341.SIG(18)
[sigmove 19:08:41 DEBUG] transformed S341Ma.SPC -> S341MA.SPC
[sigmove 19:08:41 DEBUG] transformed S341Mb.SPC -> S341MB.SPC
[sigmove 19:08:41 DEBUG] transformed S341Mc.SPC -> S341MC.SPC
[sigmove 19:08:41 DEBUG] transformed S341Md.SPC -> S341MD.SPC
[sigmove 19:08:41 DEBUG] transformed S341Me.SPC -> S341ME.SPC
[sigmove 19:08:41 DEBUG] transformed S341Mf.SPC -> S341MF.SPC
[Status 19:08:41 INFO] data for S341 transferred to science data processing
[Tidy 19:08:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:08:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:08:41 INFO] resetting WatchDogTimer
[Status 19:08:41 INFO] Starting Set [AERI set: name T341, 6 scans, 0 angle, D16300 command]
[Ingest 19:08:41 INFO] Sending XML status message
[Status 19:08:41 INFO] Mirror angle: 0
[Mirror 19:08:42 INFO] rotating to position T
[Status 19:08:42 INFO] .SET file for ACQ96 ready
[Ingest 19:08:43 INFO] Starting acquisition
[Status 19:08:43 INFO] reading housekeeping
[Status 19:09:01 INFO] acquire complete
[Status 19:09:02 INFO] writing housekeeping
[Sequencer 19:09:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:09:02 INFO] incremented T scene to 341 completed views
[Sequencer 19:09:02 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:09:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:09:02 INFO] incremented to [AERI set: name U341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:09:02 INFO] T341.SIG(18)
[sigmove 19:09:02 DEBUG] transformed T341Ma.SPC -> T341MA.SPC
[sigmove 19:09:02 DEBUG] transformed T341Mb.SPC -> T341MB.SPC
[sigmove 19:09:02 DEBUG] transformed T341Mc.SPC -> T341MC.SPC
[sigmove 19:09:02 DEBUG] transformed T341Md.SPC -> T341MD.SPC
[sigmove 19:09:02 DEBUG] transformed T341Me.SPC -> T341ME.SPC
[sigmove 19:09:02 DEBUG] transformed T341Mf.SPC -> T341MF.SPC
[Status 19:09:02 INFO] data for T341 transferred to science data processing
[Tidy 19:09:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:09:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:09:02 INFO] resetting WatchDogTimer
[Status 19:09:03 INFO] Starting Set [AERI set: name U341, 6 scans, 0 angle, D16300 command]
[Ingest 19:09:03 INFO] Sending XML status message
[Status 19:09:03 INFO] Mirror angle: 0
[Mirror 19:09:03 INFO] rotating to position U
[Status 19:09:04 INFO] .SET file for ACQ96 ready
[Ingest 19:09:04 INFO] Starting acquisition
[Status 19:09:05 INFO] reading housekeeping
[Status 19:09:23 INFO] acquire complete
[Status 19:09:24 INFO] writing housekeeping
[Sequencer 19:09:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:09:24 INFO] incremented U scene to 341 completed views
[Sequencer 19:09:24 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:09:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:09:24 INFO] incremented to [AERI set: name V341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:09:24 INFO] U341.SIG(18)
[sigmove 19:09:24 DEBUG] transformed U341Ma.SPC -> U341MA.SPC
[sigmove 19:09:24 DEBUG] transformed U341Mb.SPC -> U341MB.SPC
[sigmove 19:09:24 DEBUG] transformed U341Mc.SPC -> U341MC.SPC
[sigmove 19:09:24 DEBUG] transformed U341Md.SPC -> U341MD.SPC
[sigmove 19:09:24 DEBUG] transformed U341Me.SPC -> U341ME.SPC
[sigmove 19:09:24 DEBUG] transformed U341Mf.SPC -> U341MF.SPC
[Status 19:09:24 INFO] data for U341 transferred to science data processing
[Tidy 19:09:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:09:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:09:24 INFO] resetting WatchDogTimer
[Status 19:09:24 INFO] Starting Set [AERI set: name V341, 6 scans, 0 angle, D16300 command]
[Ingest 19:09:24 INFO] Sending XML status message
[Status 19:09:24 INFO] Mirror angle: 0
[Mirror 19:09:25 INFO] rotating to position V
[Status 19:09:25 INFO] .SET file for ACQ96 ready
[Ingest 19:09:25 INFO] Starting acquisition
[Status 19:09:26 INFO] reading housekeeping
[Status 19:09:44 INFO] acquire complete
[Status 19:09:45 INFO] writing housekeeping
[Sequencer 19:09:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:09:45 INFO] incremented V scene to 341 completed views
[Sequencer 19:09:45 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:09:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:09:45 INFO] incremented to [AERI set: name W341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:09:45 INFO] V341.SIG(18)
[sigmove 19:09:45 DEBUG] transformed V341Ma.SPC -> V341MA.SPC
[sigmove 19:09:45 DEBUG] transformed V341Mb.SPC -> V341MB.SPC
[sigmove 19:09:45 DEBUG] transformed V341Mc.SPC -> V341MC.SPC
[sigmove 19:09:45 DEBUG] transformed V341Md.SPC -> V341MD.SPC
[sigmove 19:09:45 DEBUG] transformed V341Me.SPC -> V341ME.SPC
[sigmove 19:09:45 DEBUG] transformed V341Mf.SPC -> V341MF.SPC
[Status 19:09:45 INFO] data for V341 transferred to science data processing
[Tidy 19:09:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:09:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:09:45 INFO] resetting WatchDogTimer
[Status 19:09:45 INFO] Starting Set [AERI set: name W341, 6 scans, 0 angle, D16300 command]
[Ingest 19:09:45 INFO] Sending XML status message
[Status 19:09:45 INFO] Mirror angle: 0
[Mirror 19:09:46 INFO] rotating to position W
[Status 19:09:46 INFO] .SET file for ACQ96 ready
[Ingest 19:09:47 INFO] Starting acquisition
[Status 19:09:47 INFO] reading housekeeping
[Status 19:10:05 INFO] acquire complete
[Status 19:10:06 INFO] writing housekeeping
[Sequencer 19:10:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:10:06 INFO] incremented W scene to 341 completed views
[Sequencer 19:10:06 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:10:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:10:06 INFO] incremented to [AERI set: name X341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:10:06 INFO] W341.SIG(18)
[sigmove 19:10:06 DEBUG] transformed W341Ma.SPC -> W341MA.SPC
[sigmove 19:10:06 DEBUG] transformed W341Mb.SPC -> W341MB.SPC
[sigmove 19:10:06 DEBUG] transformed W341Mc.SPC -> W341MC.SPC
[sigmove 19:10:06 DEBUG] transformed W341Md.SPC -> W341MD.SPC
[sigmove 19:10:06 DEBUG] transformed W341Me.SPC -> W341ME.SPC
[sigmove 19:10:06 DEBUG] transformed W341Mf.SPC -> W341MF.SPC
[Status 19:10:06 INFO] data for W341 transferred to science data processing
[Tidy 19:10:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:10:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:10:06 INFO] resetting WatchDogTimer
[Status 19:10:07 INFO] Starting Set [AERI set: name X341, 6 scans, 0 angle, D16300 command]
[Ingest 19:10:07 INFO] Sending XML status message
[Status 19:10:07 INFO] Mirror angle: 0
[Mirror 19:10:07 INFO] rotating to position X
[Status 19:10:08 INFO] .SET file for ACQ96 ready
[Ingest 19:10:08 INFO] Starting acquisition
[Status 19:10:08 INFO] reading housekeeping
[Status 19:10:26 INFO] acquire complete
[Status 19:10:27 INFO] writing housekeeping
[Sequencer 19:10:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:10:27 INFO] incremented X scene to 341 completed views
[Sequencer 19:10:27 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:10:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:10:27 INFO] incremented to [AERI set: name Y341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:10:27 INFO] X341.SIG(18)
[sigmove 19:10:27 DEBUG] transformed X341Ma.SPC -> X341MA.SPC
[sigmove 19:10:27 DEBUG] transformed X341Mb.SPC -> X341MB.SPC
[sigmove 19:10:27 DEBUG] transformed X341Mc.SPC -> X341MC.SPC
[sigmove 19:10:27 DEBUG] transformed X341Md.SPC -> X341MD.SPC
[sigmove 19:10:27 DEBUG] transformed X341Me.SPC -> X341ME.SPC
[sigmove 19:10:27 DEBUG] transformed X341Mf.SPC -> X341MF.SPC
[Status 19:10:27 INFO] data for X341 transferred to science data processing
[Tidy 19:10:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:10:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:10:27 INFO] resetting WatchDogTimer
[Status 19:10:28 INFO] Starting Set [AERI set: name Y341, 6 scans, 0 angle, D16300 command]
[Ingest 19:10:28 INFO] Sending XML status message
[Status 19:10:28 INFO] Mirror angle: 0
[Mirror 19:10:28 INFO] rotating to position Y
[Status 19:10:29 INFO] .SET file for ACQ96 ready
[Ingest 19:10:29 INFO] Starting acquisition
[Status 19:10:30 INFO] reading housekeeping
[Status 19:10:48 INFO] acquire complete
[Status 19:10:49 INFO] writing housekeeping
[Sequencer 19:10:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:10:49 INFO] incremented Y scene to 341 completed views
[Sequencer 19:10:49 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:10:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:10:49 INFO] incremented to [AERI set: name Z341, 6 scans, 0 angle, D16300 command] set
[sigmove 19:10:49 INFO] Y341.SIG(18)
[sigmove 19:10:49 DEBUG] transformed Y341Ma.SPC -> Y341MA.SPC
[sigmove 19:10:49 DEBUG] transformed Y341Mb.SPC -> Y341MB.SPC
[sigmove 19:10:49 DEBUG] transformed Y341Mc.SPC -> Y341MC.SPC
[sigmove 19:10:49 DEBUG] transformed Y341Md.SPC -> Y341MD.SPC
[sigmove 19:10:49 DEBUG] transformed Y341Me.SPC -> Y341ME.SPC
[sigmove 19:10:49 DEBUG] transformed Y341Mf.SPC -> Y341MF.SPC
[Status 19:10:49 INFO] data for Y341 transferred to science data processing
[Tidy 19:10:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:10:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:10:49 INFO] resetting WatchDogTimer
[Status 19:10:49 INFO] Starting Set [AERI set: name Z341, 6 scans, 0 angle, D16300 command]
[Ingest 19:10:49 INFO] Sending XML status message
[Status 19:10:49 INFO] Mirror angle: 0
[Mirror 19:10:50 INFO] rotating to position Z
[Status 19:10:50 INFO] .SET file for ACQ96 ready
[Ingest 19:10:51 INFO] Starting acquisition
[Status 19:10:51 INFO] reading housekeeping
[Status 19:11:09 INFO] acquire complete
[Status 19:11:10 INFO] writing housekeeping
[Sequencer 19:11:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:11:10 INFO] incremented Z scene to 341 completed views
[Sequencer 19:11:10 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:11:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:11:10 INFO] incremented to [AERI set: name A342, 6 scans, 120 angle, D28300 command] set
[sigmove 19:11:10 INFO] Z341.SIG(18)
[sigmove 19:11:10 DEBUG] transformed Z341Ma.SPC -> Z341MA.SPC
[sigmove 19:11:10 DEBUG] transformed Z341Mb.SPC -> Z341MB.SPC
[sigmove 19:11:10 DEBUG] transformed Z341Mc.SPC -> Z341MC.SPC
[sigmove 19:11:10 DEBUG] transformed Z341Md.SPC -> Z341MD.SPC
[sigmove 19:11:10 DEBUG] transformed Z341Me.SPC -> Z341ME.SPC
[sigmove 19:11:10 DEBUG] transformed Z341Mf.SPC -> Z341MF.SPC
[Status 19:11:10 INFO] data for Z341 transferred to science data processing
[Tidy 19:11:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:11:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:11:10 INFO] resetting WatchDogTimer
[Status 19:11:10 INFO] Starting Set [AERI set: name A342, 6 scans, 120 angle, D28300 command]
[Ingest 19:11:10 INFO] Sending XML status message
[Status 19:11:10 INFO] Mirror angle: 120
[Mirror 19:11:11 INFO] rotating to position A
[Status 19:11:13 INFO] .SET file for ACQ96 ready
[Ingest 19:11:13 INFO] Starting acquisition
[Status 19:11:13 INFO] reading housekeeping
[Status 19:11:31 INFO] acquire complete
[Status 19:11:32 INFO] writing housekeeping
[Sequencer 19:11:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:11:32 INFO] incremented A scene to 342 completed views
[Sequencer 19:11:32 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:11:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:11:32 INFO] incremented to [AERI set: name H342, 6 scans, 60 angle, D22500 command] set
[sigmove 19:11:32 INFO] A342.SIG(18)
[sigmove 19:11:32 DEBUG] transformed A342Ma.SPC -> A342MA.SPC
[sigmove 19:11:32 DEBUG] transformed A342Mb.SPC -> A342MB.SPC
[sigmove 19:11:32 DEBUG] transformed A342Mc.SPC -> A342MC.SPC
[sigmove 19:11:32 DEBUG] transformed A342Md.SPC -> A342MD.SPC
[sigmove 19:11:32 DEBUG] transformed A342Me.SPC -> A342ME.SPC
[sigmove 19:11:32 DEBUG] transformed A342Mf.SPC -> A342MF.SPC
[Status 19:11:32 INFO] data for A342 transferred to science data processing
[Tidy 19:11:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:11:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:11:32 INFO] resetting WatchDogTimer
[Status 19:11:33 INFO] Starting Set [AERI set: name H342, 6 scans, 60 angle, D22500 command]
[Ingest 19:11:33 INFO] Sending XML status message
[Status 19:11:33 INFO] Mirror angle: 60
[Mirror 19:11:33 INFO] rotating to position H
[Status 19:11:34 INFO] .SET file for ACQ96 ready
[Ingest 19:11:35 INFO] Starting acquisition
[Status 19:11:35 INFO] reading housekeeping
[Status 19:11:53 INFO] acquire complete
[Status 19:11:54 INFO] writing housekeeping
[Sequencer 19:11:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:11:54 INFO] incremented H scene to 342 completed views
[Sequencer 19:11:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:11:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:11:54 INFO] incremented to [AERI set: name S342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:11:54 INFO] H342.SIG(18)
[sigmove 19:11:54 DEBUG] transformed H342Ma.SPC -> H342MA.SPC
[sigmove 19:11:54 DEBUG] transformed H342Mb.SPC -> H342MB.SPC
[sigmove 19:11:54 DEBUG] transformed H342Mc.SPC -> H342MC.SPC
[sigmove 19:11:54 DEBUG] transformed H342Md.SPC -> H342MD.SPC
[sigmove 19:11:54 DEBUG] transformed H342Me.SPC -> H342ME.SPC
[sigmove 19:11:54 DEBUG] transformed H342Mf.SPC -> H342MF.SPC
[Status 19:11:54 INFO] data for H342 transferred to science data processing
[Tidy 19:11:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:11:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:11:54 INFO] resetting WatchDogTimer
[Status 19:11:54 INFO] Starting Set [AERI set: name S342, 6 scans, 0 angle, D16300 command]
[Ingest 19:11:54 INFO] Sending XML status message
[Status 19:11:54 INFO] Mirror angle: 0
[Mirror 19:11:55 INFO] rotating to position S
[Status 19:11:56 INFO] .SET file for ACQ96 ready
[Ingest 19:11:56 INFO] Starting acquisition
[Status 19:11:57 INFO] reading housekeeping
[Status 19:12:14 INFO] acquire complete
[Status 19:12:15 INFO] writing housekeeping
[Sequencer 19:12:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:12:15 INFO] incremented S scene to 342 completed views
[Sequencer 19:12:15 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:12:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:12:15 INFO] incremented to [AERI set: name T342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:12:15 INFO] S342.SIG(18)
[sigmove 19:12:15 DEBUG] transformed S342Ma.SPC -> S342MA.SPC
[sigmove 19:12:15 DEBUG] transformed S342Mb.SPC -> S342MB.SPC
[sigmove 19:12:15 DEBUG] transformed S342Mc.SPC -> S342MC.SPC
[sigmove 19:12:15 DEBUG] transformed S342Md.SPC -> S342MD.SPC
[sigmove 19:12:15 DEBUG] transformed S342Me.SPC -> S342ME.SPC
[sigmove 19:12:15 DEBUG] transformed S342Mf.SPC -> S342MF.SPC
[Status 19:12:15 INFO] data for S342 transferred to science data processing
[Tidy 19:12:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:12:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:12:15 INFO] resetting WatchDogTimer
[Status 19:12:16 INFO] Starting Set [AERI set: name T342, 6 scans, 0 angle, D16300 command]
[Ingest 19:12:16 INFO] Sending XML status message
[Status 19:12:16 INFO] Mirror angle: 0
[Mirror 19:12:16 INFO] rotating to position T
[Status 19:12:17 INFO] .SET file for ACQ96 ready
[Ingest 19:12:17 INFO] Starting acquisition
[Status 19:12:17 INFO] reading housekeeping
[Status 19:12:35 INFO] acquire complete
[Status 19:12:36 INFO] writing housekeeping
[Sequencer 19:12:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:12:36 INFO] incremented T scene to 342 completed views
[Sequencer 19:12:36 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:12:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:12:36 INFO] incremented to [AERI set: name U342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:12:36 INFO] T342.SIG(18)
[sigmove 19:12:36 DEBUG] transformed T342Ma.SPC -> T342MA.SPC
[sigmove 19:12:36 DEBUG] transformed T342Mb.SPC -> T342MB.SPC
[sigmove 19:12:36 DEBUG] transformed T342Mc.SPC -> T342MC.SPC
[sigmove 19:12:36 DEBUG] transformed T342Md.SPC -> T342MD.SPC
[sigmove 19:12:36 DEBUG] transformed T342Me.SPC -> T342ME.SPC
[sigmove 19:12:36 DEBUG] transformed T342Mf.SPC -> T342MF.SPC
[Status 19:12:36 INFO] data for T342 transferred to science data processing
[Tidy 19:12:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:12:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:12:36 INFO] resetting WatchDogTimer
[Status 19:12:37 INFO] Starting Set [AERI set: name U342, 6 scans, 0 angle, D16300 command]
[Ingest 19:12:37 INFO] Sending XML status message
[Status 19:12:37 INFO] Mirror angle: 0
[Mirror 19:12:37 INFO] rotating to position U
[Status 19:12:38 INFO] .SET file for ACQ96 ready
[Ingest 19:12:38 INFO] Starting acquisition
[Status 19:12:39 INFO] reading housekeeping
[Status 19:12:57 INFO] acquire complete
[Status 19:12:58 INFO] writing housekeeping
[Sequencer 19:12:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:12:58 INFO] incremented U scene to 342 completed views
[Sequencer 19:12:58 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:12:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:12:58 INFO] incremented to [AERI set: name V342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:12:58 INFO] U342.SIG(18)
[sigmove 19:12:58 DEBUG] transformed U342Ma.SPC -> U342MA.SPC
[sigmove 19:12:58 DEBUG] transformed U342Mb.SPC -> U342MB.SPC
[sigmove 19:12:58 DEBUG] transformed U342Mc.SPC -> U342MC.SPC
[sigmove 19:12:58 DEBUG] transformed U342Md.SPC -> U342MD.SPC
[sigmove 19:12:58 DEBUG] transformed U342Me.SPC -> U342ME.SPC
[sigmove 19:12:58 DEBUG] transformed U342Mf.SPC -> U342MF.SPC
[Status 19:12:58 INFO] data for U342 transferred to science data processing
[Tidy 19:12:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:12:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:12:58 INFO] resetting WatchDogTimer
[Status 19:12:58 INFO] Starting Set [AERI set: name V342, 6 scans, 0 angle, D16300 command]
[Ingest 19:12:58 INFO] Sending XML status message
[Status 19:12:58 INFO] Mirror angle: 0
[Mirror 19:12:59 INFO] rotating to position V
[Status 19:12:59 INFO] .SET file for ACQ96 ready
[Ingest 19:13:00 INFO] Starting acquisition
[Status 19:13:00 INFO] reading housekeeping
[Status 19:13:18 INFO] acquire complete
[Status 19:13:19 INFO] writing housekeeping
[Sequencer 19:13:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:13:19 INFO] incremented V scene to 342 completed views
[Sequencer 19:13:19 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:13:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:13:19 INFO] incremented to [AERI set: name W342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:13:19 INFO] V342.SIG(18)
[sigmove 19:13:19 DEBUG] transformed V342Ma.SPC -> V342MA.SPC
[sigmove 19:13:19 DEBUG] transformed V342Mb.SPC -> V342MB.SPC
[sigmove 19:13:19 DEBUG] transformed V342Mc.SPC -> V342MC.SPC
[sigmove 19:13:19 DEBUG] transformed V342Md.SPC -> V342MD.SPC
[sigmove 19:13:19 DEBUG] transformed V342Me.SPC -> V342ME.SPC
[sigmove 19:13:19 DEBUG] transformed V342Mf.SPC -> V342MF.SPC
[Status 19:13:19 INFO] data for V342 transferred to science data processing
[Tidy 19:13:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:13:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:13:19 INFO] resetting WatchDogTimer
[Status 19:13:20 INFO] Starting Set [AERI set: name W342, 6 scans, 0 angle, D16300 command]
[Ingest 19:13:20 INFO] Sending XML status message
[Status 19:13:20 INFO] Mirror angle: 0
[Mirror 19:13:20 INFO] rotating to position W
[Status 19:13:21 INFO] .SET file for ACQ96 ready
[Ingest 19:13:21 INFO] Starting acquisition
[Status 19:13:22 INFO] reading housekeeping
[Status 19:13:39 INFO] acquire complete
[Status 19:13:40 INFO] writing housekeeping
[Sequencer 19:13:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:13:40 INFO] incremented W scene to 342 completed views
[Sequencer 19:13:40 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:13:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:13:40 INFO] incremented to [AERI set: name X342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:13:40 INFO] W342.SIG(18)
[sigmove 19:13:40 DEBUG] transformed W342Ma.SPC -> W342MA.SPC
[sigmove 19:13:40 DEBUG] transformed W342Mb.SPC -> W342MB.SPC
[sigmove 19:13:40 DEBUG] transformed W342Mc.SPC -> W342MC.SPC
[sigmove 19:13:40 DEBUG] transformed W342Md.SPC -> W342MD.SPC
[sigmove 19:13:40 DEBUG] transformed W342Me.SPC -> W342ME.SPC
[sigmove 19:13:40 DEBUG] transformed W342Mf.SPC -> W342MF.SPC
[Status 19:13:40 INFO] data for W342 transferred to science data processing
[Tidy 19:13:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:13:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:13:40 INFO] resetting WatchDogTimer
[Status 19:13:41 INFO] Starting Set [AERI set: name X342, 6 scans, 0 angle, D16300 command]
[Ingest 19:13:41 INFO] Sending XML status message
[Status 19:13:41 INFO] Mirror angle: 0
[Mirror 19:13:41 INFO] rotating to position X
[Status 19:13:42 INFO] .SET file for ACQ96 ready
[Ingest 19:13:42 INFO] Starting acquisition
[Status 19:13:43 INFO] reading housekeeping
[Status 19:14:01 INFO] acquire complete
[Status 19:14:02 INFO] writing housekeeping
[Sequencer 19:14:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:14:02 INFO] incremented X scene to 342 completed views
[Sequencer 19:14:02 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:14:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:14:02 INFO] incremented to [AERI set: name Y342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:14:02 INFO] X342.SIG(18)
[sigmove 19:14:02 DEBUG] transformed X342Ma.SPC -> X342MA.SPC
[sigmove 19:14:02 DEBUG] transformed X342Mb.SPC -> X342MB.SPC
[sigmove 19:14:02 DEBUG] transformed X342Mc.SPC -> X342MC.SPC
[sigmove 19:14:02 DEBUG] transformed X342Md.SPC -> X342MD.SPC
[sigmove 19:14:02 DEBUG] transformed X342Me.SPC -> X342ME.SPC
[sigmove 19:14:02 DEBUG] transformed X342Mf.SPC -> X342MF.SPC
[Status 19:14:02 INFO] data for X342 transferred to science data processing
[Tidy 19:14:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:14:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:14:02 INFO] resetting WatchDogTimer
[Status 19:14:02 INFO] Starting Set [AERI set: name Y342, 6 scans, 0 angle, D16300 command]
[Ingest 19:14:02 INFO] Sending XML status message
[Status 19:14:02 INFO] Mirror angle: 0
[Mirror 19:14:03 INFO] rotating to position Y
[Status 19:14:03 INFO] .SET file for ACQ96 ready
[Ingest 19:14:04 INFO] Starting acquisition
[Status 19:14:04 INFO] reading housekeeping
[Status 19:14:22 INFO] acquire complete
[Status 19:14:23 INFO] writing housekeeping
[Sequencer 19:14:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:14:23 INFO] incremented Y scene to 342 completed views
[Sequencer 19:14:23 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:14:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:14:23 INFO] incremented to [AERI set: name Z342, 6 scans, 0 angle, D16300 command] set
[sigmove 19:14:23 INFO] Y342.SIG(18)
[sigmove 19:14:23 DEBUG] transformed Y342Ma.SPC -> Y342MA.SPC
[sigmove 19:14:23 DEBUG] transformed Y342Mb.SPC -> Y342MB.SPC
[sigmove 19:14:23 DEBUG] transformed Y342Mc.SPC -> Y342MC.SPC
[sigmove 19:14:23 DEBUG] transformed Y342Md.SPC -> Y342MD.SPC
[sigmove 19:14:23 DEBUG] transformed Y342Me.SPC -> Y342ME.SPC
[sigmove 19:14:23 DEBUG] transformed Y342Mf.SPC -> Y342MF.SPC
[Status 19:14:23 INFO] data for Y342 transferred to science data processing
[Tidy 19:14:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:14:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:14:23 INFO] resetting WatchDogTimer
[Status 19:14:23 INFO] Starting Set [AERI set: name Z342, 6 scans, 0 angle, D16300 command]
[Ingest 19:14:23 INFO] Sending XML status message
[Status 19:14:23 INFO] Mirror angle: 0
[Mirror 19:14:24 INFO] rotating to position Z
[Status 19:14:24 INFO] .SET file for ACQ96 ready
[Ingest 19:14:25 INFO] Starting acquisition
[Status 19:14:25 INFO] reading housekeeping
[Status 19:14:43 INFO] acquire complete
[Status 19:14:44 INFO] writing housekeeping
[Sequencer 19:14:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:14:44 INFO] incremented Z scene to 342 completed views
[Sequencer 19:14:44 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:14:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:14:44 INFO] incremented to [AERI set: name H343, 6 scans, 60 angle, D22500 command] set
[sigmove 19:14:44 INFO] Z342.SIG(18)
[sigmove 19:14:44 DEBUG] transformed Z342Ma.SPC -> Z342MA.SPC
[sigmove 19:14:44 DEBUG] transformed Z342Mb.SPC -> Z342MB.SPC
[sigmove 19:14:44 DEBUG] transformed Z342Mc.SPC -> Z342MC.SPC
[sigmove 19:14:44 DEBUG] transformed Z342Md.SPC -> Z342MD.SPC
[sigmove 19:14:44 DEBUG] transformed Z342Me.SPC -> Z342ME.SPC
[sigmove 19:14:44 DEBUG] transformed Z342Mf.SPC -> Z342MF.SPC
[Status 19:14:44 INFO] data for Z342 transferred to science data processing
[Tidy 19:14:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:14:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:14:44 INFO] resetting WatchDogTimer
[Status 19:14:45 INFO] Starting Set [AERI set: name H343, 6 scans, 60 angle, D22500 command]
[Ingest 19:14:45 INFO] Sending XML status message
[Status 19:14:45 INFO] Mirror angle: 60
[Mirror 19:14:45 INFO] rotating to position H
[Status 19:14:46 INFO] .SET file for ACQ96 ready
[Ingest 19:14:47 INFO] Starting acquisition
[Status 19:14:47 INFO] reading housekeeping
[Status 19:15:05 INFO] acquire complete
[Status 19:15:06 INFO] writing housekeeping
[Sequencer 19:15:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:15:06 INFO] incremented H scene to 343 completed views
[Sequencer 19:15:06 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:15:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:15:06 INFO] incremented to [AERI set: name A343, 6 scans, 120 angle, D28300 command] set
[sigmove 19:15:06 INFO] H343.SIG(18)
[sigmove 19:15:06 DEBUG] transformed H343Ma.SPC -> H343MA.SPC
[sigmove 19:15:06 DEBUG] transformed H343Mb.SPC -> H343MB.SPC
[sigmove 19:15:06 DEBUG] transformed H343Mc.SPC -> H343MC.SPC
[sigmove 19:15:06 DEBUG] transformed H343Md.SPC -> H343MD.SPC
[sigmove 19:15:06 DEBUG] transformed H343Me.SPC -> H343ME.SPC
[sigmove 19:15:06 DEBUG] transformed H343Mf.SPC -> H343MF.SPC
[Status 19:15:06 INFO] data for H343 transferred to science data processing
[Tidy 19:15:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:15:06 INFO] A341.FIN(19),H341.FIN(19),S341.FIN(19),T341.FIN(19),U341.FIN(19),V341.FIN(19),W341.FIN(19),X341.FIN(19),Y341.FIN(19),Z341.FIN(19),A342.FIN(19),H342.FIN(19),S342.FIN(19),T342.FIN(19),U342.FIN(19),V342.FIN(19),W342.FIN(19),X342.FIN(19),Y342.FIN(19),Z342.FIN(19)
[sigmove 19:15:06 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:15:06 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:15:12 DEBUG] done zipping
[WatchDog 19:15:12 INFO] resetting WatchDogTimer
[Status 19:15:13 INFO] Starting Set [AERI set: name A343, 6 scans, 120 angle, D28300 command]
[Ingest 19:15:13 INFO] Sending XML status message
[Status 19:15:13 INFO] Mirror angle: 120
[Mirror 19:15:13 INFO] rotating to position A
[Status 19:15:14 INFO] .SET file for ACQ96 ready
[Ingest 19:15:15 INFO] Starting acquisition
[Status 19:15:15 INFO] reading housekeeping
[Status 19:15:33 INFO] acquire complete
[Status 19:15:34 INFO] writing housekeeping
[Sequencer 19:15:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:15:34 INFO] incremented A scene to 343 completed views
[Sequencer 19:15:34 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:15:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:15:34 INFO] incremented to [AERI set: name S343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:15:34 INFO] A343.SIG(18)
[sigmove 19:15:34 DEBUG] transformed A343Ma.SPC -> A343MA.SPC
[sigmove 19:15:34 DEBUG] transformed A343Mb.SPC -> A343MB.SPC
[sigmove 19:15:34 DEBUG] transformed A343Mc.SPC -> A343MC.SPC
[sigmove 19:15:34 DEBUG] transformed A343Md.SPC -> A343MD.SPC
[sigmove 19:15:34 DEBUG] transformed A343Me.SPC -> A343ME.SPC
[sigmove 19:15:34 DEBUG] transformed A343Mf.SPC -> A343MF.SPC
[Status 19:15:34 INFO] data for A343 transferred to science data processing
[Tidy 19:15:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:15:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:15:34 INFO] resetting WatchDogTimer
[Status 19:15:34 INFO] Starting Set [AERI set: name S343, 6 scans, 0 angle, D16300 command]
[Ingest 19:15:34 INFO] Sending XML status message
[Status 19:15:34 INFO] Mirror angle: 0
[Mirror 19:15:35 INFO] rotating to position S
[Status 19:15:36 INFO] .SET file for ACQ96 ready
[Ingest 19:15:37 INFO] Starting acquisition
[Status 19:15:37 INFO] reading housekeeping
[Status 19:15:55 INFO] acquire complete
[Status 19:15:56 INFO] writing housekeeping
[Sequencer 19:15:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:15:56 INFO] incremented S scene to 343 completed views
[Sequencer 19:15:56 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:15:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:15:56 INFO] incremented to [AERI set: name T343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:15:56 INFO] S343.SIG(18)
[sigmove 19:15:56 DEBUG] transformed S343Ma.SPC -> S343MA.SPC
[sigmove 19:15:56 DEBUG] transformed S343Mb.SPC -> S343MB.SPC
[sigmove 19:15:56 DEBUG] transformed S343Mc.SPC -> S343MC.SPC
[sigmove 19:15:56 DEBUG] transformed S343Md.SPC -> S343MD.SPC
[sigmove 19:15:56 DEBUG] transformed S343Me.SPC -> S343ME.SPC
[sigmove 19:15:56 DEBUG] transformed S343Mf.SPC -> S343MF.SPC
[Status 19:15:56 INFO] data for S343 transferred to science data processing
[Tidy 19:15:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:15:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:15:56 INFO] resetting WatchDogTimer
[Status 19:15:57 INFO] Starting Set [AERI set: name T343, 6 scans, 0 angle, D16300 command]
[Ingest 19:15:57 INFO] Sending XML status message
[Status 19:15:57 INFO] Mirror angle: 0
[Mirror 19:15:57 INFO] rotating to position T
[Status 19:15:58 INFO] .SET file for ACQ96 ready
[Ingest 19:15:58 INFO] Starting acquisition
[Status 19:15:58 INFO] reading housekeeping
[Status 19:16:16 INFO] acquire complete
[Status 19:16:17 INFO] writing housekeeping
[Sequencer 19:16:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:16:17 INFO] incremented T scene to 343 completed views
[Sequencer 19:16:17 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:16:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:16:17 INFO] incremented to [AERI set: name U343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:16:17 INFO] T343.SIG(18)
[sigmove 19:16:17 DEBUG] transformed T343Ma.SPC -> T343MA.SPC
[sigmove 19:16:17 DEBUG] transformed T343Mb.SPC -> T343MB.SPC
[sigmove 19:16:17 DEBUG] transformed T343Mc.SPC -> T343MC.SPC
[sigmove 19:16:17 DEBUG] transformed T343Md.SPC -> T343MD.SPC
[sigmove 19:16:17 DEBUG] transformed T343Me.SPC -> T343ME.SPC
[sigmove 19:16:17 DEBUG] transformed T343Mf.SPC -> T343MF.SPC
[Status 19:16:17 INFO] data for T343 transferred to science data processing
[Tidy 19:16:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:16:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:16:17 INFO] resetting WatchDogTimer
[Status 19:16:18 INFO] Starting Set [AERI set: name U343, 6 scans, 0 angle, D16300 command]
[Ingest 19:16:18 INFO] Sending XML status message
[Status 19:16:18 INFO] Mirror angle: 0
[Mirror 19:16:18 INFO] rotating to position U
[Status 19:16:19 INFO] .SET file for ACQ96 ready
[Ingest 19:16:19 INFO] Starting acquisition
[Status 19:16:20 INFO] reading housekeeping
[Status 19:16:38 INFO] acquire complete
[Status 19:16:39 INFO] writing housekeeping
[Sequencer 19:16:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:16:39 INFO] incremented U scene to 343 completed views
[Sequencer 19:16:39 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:16:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:16:39 INFO] incremented to [AERI set: name V343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:16:39 INFO] U343.SIG(18)
[sigmove 19:16:39 DEBUG] transformed U343Ma.SPC -> U343MA.SPC
[sigmove 19:16:39 DEBUG] transformed U343Mb.SPC -> U343MB.SPC
[sigmove 19:16:39 DEBUG] transformed U343Mc.SPC -> U343MC.SPC
[sigmove 19:16:39 DEBUG] transformed U343Md.SPC -> U343MD.SPC
[sigmove 19:16:39 DEBUG] transformed U343Me.SPC -> U343ME.SPC
[sigmove 19:16:39 DEBUG] transformed U343Mf.SPC -> U343MF.SPC
[Status 19:16:39 INFO] data for U343 transferred to science data processing
[Tidy 19:16:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:16:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:16:39 INFO] resetting WatchDogTimer
[Status 19:16:39 INFO] Starting Set [AERI set: name V343, 6 scans, 0 angle, D16300 command]
[Ingest 19:16:39 INFO] Sending XML status message
[Status 19:16:39 INFO] Mirror angle: 0
[Mirror 19:16:40 INFO] rotating to position V
[Status 19:16:40 INFO] .SET file for ACQ96 ready
[Ingest 19:16:41 INFO] Starting acquisition
[Status 19:16:41 INFO] reading housekeeping
[Status 19:16:59 INFO] acquire complete
[Status 19:17:00 INFO] writing housekeeping
[Sequencer 19:17:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:17:00 INFO] incremented V scene to 343 completed views
[Sequencer 19:17:00 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:17:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:17:00 INFO] incremented to [AERI set: name W343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:17:00 INFO] V343.SIG(18)
[sigmove 19:17:00 DEBUG] transformed V343Ma.SPC -> V343MA.SPC
[sigmove 19:17:00 DEBUG] transformed V343Mb.SPC -> V343MB.SPC
[sigmove 19:17:00 DEBUG] transformed V343Mc.SPC -> V343MC.SPC
[sigmove 19:17:00 DEBUG] transformed V343Md.SPC -> V343MD.SPC
[sigmove 19:17:00 DEBUG] transformed V343Me.SPC -> V343ME.SPC
[sigmove 19:17:00 DEBUG] transformed V343Mf.SPC -> V343MF.SPC
[Status 19:17:00 INFO] data for V343 transferred to science data processing
[Tidy 19:17:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:17:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:17:00 INFO] resetting WatchDogTimer
[Status 19:17:00 INFO] Starting Set [AERI set: name W343, 6 scans, 0 angle, D16300 command]
[Ingest 19:17:00 INFO] Sending XML status message
[Status 19:17:00 INFO] Mirror angle: 0
[Mirror 19:17:01 INFO] rotating to position W
[Status 19:17:01 INFO] .SET file for ACQ96 ready
[Ingest 19:17:02 INFO] Starting acquisition
[Status 19:17:02 INFO] reading housekeeping
[Status 19:17:20 INFO] acquire complete
[Status 19:17:21 INFO] writing housekeeping
[Sequencer 19:17:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:17:21 INFO] incremented W scene to 343 completed views
[Sequencer 19:17:21 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:17:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:17:21 INFO] incremented to [AERI set: name X343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:17:21 INFO] W343.SIG(18)
[sigmove 19:17:21 DEBUG] transformed W343Ma.SPC -> W343MA.SPC
[sigmove 19:17:21 DEBUG] transformed W343Mb.SPC -> W343MB.SPC
[sigmove 19:17:21 DEBUG] transformed W343Mc.SPC -> W343MC.SPC
[sigmove 19:17:21 DEBUG] transformed W343Md.SPC -> W343MD.SPC
[sigmove 19:17:21 DEBUG] transformed W343Me.SPC -> W343ME.SPC
[sigmove 19:17:21 DEBUG] transformed W343Mf.SPC -> W343MF.SPC
[Status 19:17:21 INFO] data for W343 transferred to science data processing
[Tidy 19:17:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:17:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:17:21 INFO] resetting WatchDogTimer
[Status 19:17:22 INFO] Starting Set [AERI set: name X343, 6 scans, 0 angle, D16300 command]
[Ingest 19:17:22 INFO] Sending XML status message
[Status 19:17:22 INFO] Mirror angle: 0
[Mirror 19:17:22 INFO] rotating to position X
[Status 19:17:23 INFO] .SET file for ACQ96 ready
[Ingest 19:17:23 INFO] Starting acquisition
[Status 19:17:24 INFO] reading housekeeping
[Status 19:17:42 INFO] acquire complete
[Status 19:17:43 INFO] writing housekeeping
[Sequencer 19:17:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:17:43 INFO] incremented X scene to 343 completed views
[Sequencer 19:17:43 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:17:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:17:43 INFO] incremented to [AERI set: name Y343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:17:43 INFO] X343.SIG(18)
[sigmove 19:17:43 DEBUG] transformed X343Ma.SPC -> X343MA.SPC
[sigmove 19:17:43 DEBUG] transformed X343Mb.SPC -> X343MB.SPC
[sigmove 19:17:43 DEBUG] transformed X343Mc.SPC -> X343MC.SPC
[sigmove 19:17:43 DEBUG] transformed X343Md.SPC -> X343MD.SPC
[sigmove 19:17:43 DEBUG] transformed X343Me.SPC -> X343ME.SPC
[sigmove 19:17:43 DEBUG] transformed X343Mf.SPC -> X343MF.SPC
[Status 19:17:43 INFO] data for X343 transferred to science data processing
[Tidy 19:17:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:17:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:17:43 INFO] resetting WatchDogTimer
[Status 19:17:43 INFO] Starting Set [AERI set: name Y343, 6 scans, 0 angle, D16300 command]
[Ingest 19:17:43 INFO] Sending XML status message
[Status 19:17:43 INFO] Mirror angle: 0
[Mirror 19:17:44 INFO] rotating to position Y
[Status 19:17:44 INFO] .SET file for ACQ96 ready
[Ingest 19:17:45 INFO] Starting acquisition
[Status 19:17:45 INFO] reading housekeeping
[Status 19:18:03 INFO] acquire complete
[Status 19:18:04 INFO] writing housekeeping
[Sequencer 19:18:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:18:04 INFO] incremented Y scene to 343 completed views
[Sequencer 19:18:04 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:18:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:18:04 INFO] incremented to [AERI set: name Z343, 6 scans, 0 angle, D16300 command] set
[sigmove 19:18:04 INFO] Y343.SIG(18)
[sigmove 19:18:04 DEBUG] transformed Y343Ma.SPC -> Y343MA.SPC
[sigmove 19:18:04 DEBUG] transformed Y343Mb.SPC -> Y343MB.SPC
[sigmove 19:18:04 DEBUG] transformed Y343Mc.SPC -> Y343MC.SPC
[sigmove 19:18:04 DEBUG] transformed Y343Md.SPC -> Y343MD.SPC
[sigmove 19:18:04 DEBUG] transformed Y343Me.SPC -> Y343ME.SPC
[sigmove 19:18:04 DEBUG] transformed Y343Mf.SPC -> Y343MF.SPC
[Status 19:18:04 INFO] data for Y343 transferred to science data processing
[Tidy 19:18:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:18:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:18:04 INFO] resetting WatchDogTimer
[Status 19:18:04 INFO] Starting Set [AERI set: name Z343, 6 scans, 0 angle, D16300 command]
[Ingest 19:18:04 INFO] Sending XML status message
[Status 19:18:04 INFO] Mirror angle: 0
[Mirror 19:18:05 INFO] rotating to position Z
[Status 19:18:05 INFO] .SET file for ACQ96 ready
[Ingest 19:18:06 INFO] Starting acquisition
[Status 19:18:06 INFO] reading housekeeping
[Status 19:18:24 INFO] acquire complete
[Status 19:18:25 INFO] writing housekeeping
[Sequencer 19:18:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:18:25 INFO] incremented Z scene to 343 completed views
[Sequencer 19:18:25 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:18:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:18:25 INFO] incremented to [AERI set: name A344, 6 scans, 120 angle, D28300 command] set
[sigmove 19:18:25 INFO] Z343.SIG(18)
[sigmove 19:18:25 DEBUG] transformed Z343Ma.SPC -> Z343MA.SPC
[sigmove 19:18:25 DEBUG] transformed Z343Mb.SPC -> Z343MB.SPC
[sigmove 19:18:25 DEBUG] transformed Z343Mc.SPC -> Z343MC.SPC
[sigmove 19:18:25 DEBUG] transformed Z343Md.SPC -> Z343MD.SPC
[sigmove 19:18:25 DEBUG] transformed Z343Me.SPC -> Z343ME.SPC
[sigmove 19:18:25 DEBUG] transformed Z343Mf.SPC -> Z343MF.SPC
[Status 19:18:25 INFO] data for Z343 transferred to science data processing
[Tidy 19:18:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:18:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:18:25 INFO] resetting WatchDogTimer
[Status 19:18:26 INFO] Starting Set [AERI set: name A344, 6 scans, 120 angle, D28300 command]
[Ingest 19:18:26 INFO] Sending XML status message
[Status 19:18:26 INFO] Mirror angle: 120
[Mirror 19:18:26 INFO] rotating to position A
[Status 19:18:28 INFO] .SET file for ACQ96 ready
[Ingest 19:18:28 INFO] Starting acquisition
[Status 19:18:29 INFO] reading housekeeping
[Status 19:18:47 INFO] acquire complete
[Status 19:18:48 INFO] writing housekeeping
[Sequencer 19:18:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:18:48 INFO] incremented A scene to 344 completed views
[Sequencer 19:18:48 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:18:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:18:48 INFO] incremented to [AERI set: name H344, 6 scans, 60 angle, D22500 command] set
[sigmove 19:18:48 INFO] A344.SIG(18)
[sigmove 19:18:48 DEBUG] transformed A344Ma.SPC -> A344MA.SPC
[sigmove 19:18:48 DEBUG] transformed A344Mb.SPC -> A344MB.SPC
[sigmove 19:18:48 DEBUG] transformed A344Mc.SPC -> A344MC.SPC
[sigmove 19:18:48 DEBUG] transformed A344Md.SPC -> A344MD.SPC
[sigmove 19:18:48 DEBUG] transformed A344Me.SPC -> A344ME.SPC
[sigmove 19:18:48 DEBUG] transformed A344Mf.SPC -> A344MF.SPC
[Status 19:18:48 INFO] data for A344 transferred to science data processing
[Tidy 19:18:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:18:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:18:48 INFO] resetting WatchDogTimer
[Status 19:18:48 INFO] Starting Set [AERI set: name H344, 6 scans, 60 angle, D22500 command]
[Ingest 19:18:48 INFO] Sending XML status message
[Status 19:18:48 INFO] Mirror angle: 60
[Mirror 19:18:49 INFO] rotating to position H
[Status 19:18:50 INFO] .SET file for ACQ96 ready
[Ingest 19:18:50 INFO] Starting acquisition
[Status 19:18:51 INFO] reading housekeeping
[Status 19:19:08 INFO] acquire complete
[Status 19:19:09 INFO] writing housekeeping
[Sequencer 19:19:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:19:09 INFO] incremented H scene to 344 completed views
[Sequencer 19:19:09 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:19:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:19:09 INFO] incremented to [AERI set: name S344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:19:09 INFO] H344.SIG(18)
[sigmove 19:19:09 DEBUG] transformed H344Ma.SPC -> H344MA.SPC
[sigmove 19:19:09 DEBUG] transformed H344Mb.SPC -> H344MB.SPC
[sigmove 19:19:09 DEBUG] transformed H344Mc.SPC -> H344MC.SPC
[sigmove 19:19:09 DEBUG] transformed H344Md.SPC -> H344MD.SPC
[sigmove 19:19:09 DEBUG] transformed H344Me.SPC -> H344ME.SPC
[sigmove 19:19:09 DEBUG] transformed H344Mf.SPC -> H344MF.SPC
[Status 19:19:09 INFO] data for H344 transferred to science data processing
[Tidy 19:19:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:19:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:19:09 INFO] resetting WatchDogTimer
[Status 19:19:10 INFO] Starting Set [AERI set: name S344, 6 scans, 0 angle, D16300 command]
[Ingest 19:19:10 INFO] Sending XML status message
[Status 19:19:10 INFO] Mirror angle: 0
[Mirror 19:19:10 INFO] rotating to position S
[Status 19:19:11 INFO] .SET file for ACQ96 ready
[Ingest 19:19:12 INFO] Starting acquisition
[Status 19:19:12 INFO] reading housekeeping
[Status 19:19:30 INFO] acquire complete
[Status 19:19:31 INFO] writing housekeeping
[Sequencer 19:19:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:19:31 INFO] incremented S scene to 344 completed views
[Sequencer 19:19:31 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:19:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:19:31 INFO] incremented to [AERI set: name T344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:19:31 INFO] S344.SIG(18)
[sigmove 19:19:31 DEBUG] transformed S344Ma.SPC -> S344MA.SPC
[sigmove 19:19:31 DEBUG] transformed S344Mb.SPC -> S344MB.SPC
[sigmove 19:19:31 DEBUG] transformed S344Mc.SPC -> S344MC.SPC
[sigmove 19:19:31 DEBUG] transformed S344Md.SPC -> S344MD.SPC
[sigmove 19:19:31 DEBUG] transformed S344Me.SPC -> S344ME.SPC
[sigmove 19:19:31 DEBUG] transformed S344Mf.SPC -> S344MF.SPC
[Status 19:19:31 INFO] data for S344 transferred to science data processing
[Tidy 19:19:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:19:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:19:31 INFO] resetting WatchDogTimer
[Status 19:19:31 INFO] Starting Set [AERI set: name T344, 6 scans, 0 angle, D16300 command]
[Ingest 19:19:31 INFO] Sending XML status message
[Status 19:19:31 INFO] Mirror angle: 0
[Mirror 19:19:32 INFO] rotating to position T
[Status 19:19:32 INFO] .SET file for ACQ96 ready
[Ingest 19:19:32 INFO] Starting acquisition
[Status 19:19:33 INFO] reading housekeeping
[Status 19:19:51 INFO] acquire complete
[Status 19:19:52 INFO] writing housekeeping
[Sequencer 19:19:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:19:52 INFO] incremented T scene to 344 completed views
[Sequencer 19:19:52 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:19:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:19:52 INFO] incremented to [AERI set: name U344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:19:52 INFO] T344.SIG(18)
[sigmove 19:19:52 DEBUG] transformed T344Ma.SPC -> T344MA.SPC
[sigmove 19:19:52 DEBUG] transformed T344Mb.SPC -> T344MB.SPC
[sigmove 19:19:52 DEBUG] transformed T344Mc.SPC -> T344MC.SPC
[sigmove 19:19:52 DEBUG] transformed T344Md.SPC -> T344MD.SPC
[sigmove 19:19:52 DEBUG] transformed T344Me.SPC -> T344ME.SPC
[sigmove 19:19:52 DEBUG] transformed T344Mf.SPC -> T344MF.SPC
[Status 19:19:52 INFO] data for T344 transferred to science data processing
[Tidy 19:19:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:19:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:19:52 INFO] resetting WatchDogTimer
[Status 19:19:52 INFO] Starting Set [AERI set: name U344, 6 scans, 0 angle, D16300 command]
[Ingest 19:19:52 INFO] Sending XML status message
[Status 19:19:52 INFO] Mirror angle: 0
[Mirror 19:19:53 INFO] rotating to position U
[Status 19:19:53 INFO] .SET file for ACQ96 ready
[Ingest 19:19:53 INFO] Starting acquisition
[Status 19:19:54 INFO] reading housekeeping
[Status 19:20:12 INFO] acquire complete
[Status 19:20:13 INFO] writing housekeeping
[Sequencer 19:20:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:20:13 INFO] incremented U scene to 344 completed views
[Sequencer 19:20:13 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:20:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:20:13 INFO] incremented to [AERI set: name V344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:20:13 INFO] U344.SIG(18)
[sigmove 19:20:13 DEBUG] transformed U344Ma.SPC -> U344MA.SPC
[sigmove 19:20:13 DEBUG] transformed U344Mb.SPC -> U344MB.SPC
[sigmove 19:20:13 DEBUG] transformed U344Mc.SPC -> U344MC.SPC
[sigmove 19:20:13 DEBUG] transformed U344Md.SPC -> U344MD.SPC
[sigmove 19:20:13 DEBUG] transformed U344Me.SPC -> U344ME.SPC
[sigmove 19:20:13 DEBUG] transformed U344Mf.SPC -> U344MF.SPC
[Status 19:20:13 INFO] data for U344 transferred to science data processing
[Tidy 19:20:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:20:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:20:13 INFO] resetting WatchDogTimer
[Status 19:20:13 INFO] Starting Set [AERI set: name V344, 6 scans, 0 angle, D16300 command]
[Ingest 19:20:13 INFO] Sending XML status message
[Status 19:20:13 INFO] Mirror angle: 0
[Mirror 19:20:14 INFO] rotating to position V
[Status 19:20:14 INFO] .SET file for ACQ96 ready
[Ingest 19:20:15 INFO] Starting acquisition
[Status 19:20:15 INFO] reading housekeeping
[Status 19:20:33 INFO] acquire complete
[Status 19:20:34 INFO] writing housekeeping
[Sequencer 19:20:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:20:34 INFO] incremented V scene to 344 completed views
[Sequencer 19:20:34 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:20:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:20:34 INFO] incremented to [AERI set: name W344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:20:34 INFO] V344.SIG(18)
[sigmove 19:20:34 DEBUG] transformed V344Ma.SPC -> V344MA.SPC
[sigmove 19:20:34 DEBUG] transformed V344Mb.SPC -> V344MB.SPC
[sigmove 19:20:34 DEBUG] transformed V344Mc.SPC -> V344MC.SPC
[sigmove 19:20:34 DEBUG] transformed V344Md.SPC -> V344MD.SPC
[sigmove 19:20:34 DEBUG] transformed V344Me.SPC -> V344ME.SPC
[sigmove 19:20:34 DEBUG] transformed V344Mf.SPC -> V344MF.SPC
[Status 19:20:34 INFO] data for V344 transferred to science data processing
[Tidy 19:20:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:20:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:20:34 INFO] resetting WatchDogTimer
[Status 19:20:35 INFO] Starting Set [AERI set: name W344, 6 scans, 0 angle, D16300 command]
[Ingest 19:20:35 INFO] Sending XML status message
[Status 19:20:35 INFO] Mirror angle: 0
[Mirror 19:20:35 INFO] rotating to position W
[Status 19:20:36 INFO] .SET file for ACQ96 ready
[Ingest 19:20:36 INFO] Starting acquisition
[Status 19:20:37 INFO] reading housekeeping
[Status 19:20:54 INFO] acquire complete
[Status 19:20:56 INFO] writing housekeeping
[Sequencer 19:20:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:20:56 INFO] incremented W scene to 344 completed views
[Sequencer 19:20:56 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:20:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:20:56 INFO] incremented to [AERI set: name X344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:20:56 INFO] W344.SIG(18)
[sigmove 19:20:56 DEBUG] transformed W344Ma.SPC -> W344MA.SPC
[sigmove 19:20:56 DEBUG] transformed W344Mb.SPC -> W344MB.SPC
[sigmove 19:20:56 DEBUG] transformed W344Mc.SPC -> W344MC.SPC
[sigmove 19:20:56 DEBUG] transformed W344Md.SPC -> W344MD.SPC
[sigmove 19:20:56 DEBUG] transformed W344Me.SPC -> W344ME.SPC
[sigmove 19:20:56 DEBUG] transformed W344Mf.SPC -> W344MF.SPC
[Status 19:20:56 INFO] data for W344 transferred to science data processing
[Tidy 19:20:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:20:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:20:56 INFO] resetting WatchDogTimer
[Status 19:20:56 INFO] Starting Set [AERI set: name X344, 6 scans, 0 angle, D16300 command]
[Ingest 19:20:56 INFO] Sending XML status message
[Status 19:20:56 INFO] Mirror angle: 0
[Mirror 19:20:57 INFO] rotating to position X
[Status 19:20:57 INFO] .SET file for ACQ96 ready
[Ingest 19:20:57 INFO] Starting acquisition
[Status 19:20:58 INFO] reading housekeeping
[Status 19:21:16 INFO] acquire complete
[Status 19:21:17 INFO] writing housekeeping
[Sequencer 19:21:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:21:17 INFO] incremented X scene to 344 completed views
[Sequencer 19:21:17 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:21:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:21:17 INFO] incremented to [AERI set: name Y344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:21:17 INFO] X344.SIG(18)
[sigmove 19:21:17 DEBUG] transformed X344Ma.SPC -> X344MA.SPC
[sigmove 19:21:17 DEBUG] transformed X344Mb.SPC -> X344MB.SPC
[sigmove 19:21:17 DEBUG] transformed X344Mc.SPC -> X344MC.SPC
[sigmove 19:21:17 DEBUG] transformed X344Md.SPC -> X344MD.SPC
[sigmove 19:21:17 DEBUG] transformed X344Me.SPC -> X344ME.SPC
[sigmove 19:21:17 DEBUG] transformed X344Mf.SPC -> X344MF.SPC
[Status 19:21:17 INFO] data for X344 transferred to science data processing
[Tidy 19:21:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:21:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:21:17 INFO] resetting WatchDogTimer
[Status 19:21:17 INFO] Starting Set [AERI set: name Y344, 6 scans, 0 angle, D16300 command]
[Ingest 19:21:17 INFO] Sending XML status message
[Status 19:21:17 INFO] Mirror angle: 0
[Mirror 19:21:18 INFO] rotating to position Y
[Status 19:21:18 INFO] .SET file for ACQ96 ready
[Ingest 19:21:19 INFO] Starting acquisition
[Status 19:21:19 INFO] reading housekeeping
[Status 19:21:37 INFO] acquire complete
[Status 19:21:38 INFO] writing housekeeping
[Sequencer 19:21:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:21:38 INFO] incremented Y scene to 344 completed views
[Sequencer 19:21:38 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:21:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:21:38 INFO] incremented to [AERI set: name Z344, 6 scans, 0 angle, D16300 command] set
[sigmove 19:21:38 INFO] Y344.SIG(18)
[sigmove 19:21:38 DEBUG] transformed Y344Ma.SPC -> Y344MA.SPC
[sigmove 19:21:38 DEBUG] transformed Y344Mb.SPC -> Y344MB.SPC
[sigmove 19:21:38 DEBUG] transformed Y344Mc.SPC -> Y344MC.SPC
[sigmove 19:21:38 DEBUG] transformed Y344Md.SPC -> Y344MD.SPC
[sigmove 19:21:38 DEBUG] transformed Y344Me.SPC -> Y344ME.SPC
[sigmove 19:21:38 DEBUG] transformed Y344Mf.SPC -> Y344MF.SPC
[Status 19:21:38 INFO] data for Y344 transferred to science data processing
[Tidy 19:21:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:21:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:21:38 INFO] resetting WatchDogTimer
[Status 19:21:39 INFO] Starting Set [AERI set: name Z344, 6 scans, 0 angle, D16300 command]
[Ingest 19:21:39 INFO] Sending XML status message
[Status 19:21:39 INFO] Mirror angle: 0
[Mirror 19:21:39 INFO] rotating to position Z
[Status 19:21:40 INFO] .SET file for ACQ96 ready
[Ingest 19:21:40 INFO] Starting acquisition
[Status 19:21:40 INFO] reading housekeeping
[Status 19:21:58 INFO] acquire complete
[Status 19:22:00 INFO] writing housekeeping
[Sequencer 19:22:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:22:00 INFO] incremented Z scene to 344 completed views
[Sequencer 19:22:00 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:22:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:22:00 INFO] incremented to [AERI set: name H345, 6 scans, 60 angle, D22500 command] set
[sigmove 19:22:00 INFO] Z344.SIG(18)
[sigmove 19:22:00 DEBUG] transformed Z344Ma.SPC -> Z344MA.SPC
[sigmove 19:22:00 DEBUG] transformed Z344Mb.SPC -> Z344MB.SPC
[sigmove 19:22:00 DEBUG] transformed Z344Mc.SPC -> Z344MC.SPC
[sigmove 19:22:00 DEBUG] transformed Z344Md.SPC -> Z344MD.SPC
[sigmove 19:22:00 DEBUG] transformed Z344Me.SPC -> Z344ME.SPC
[sigmove 19:22:00 DEBUG] transformed Z344Mf.SPC -> Z344MF.SPC
[Status 19:22:00 INFO] data for Z344 transferred to science data processing
[Tidy 19:22:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:22:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:22:00 INFO] resetting WatchDogTimer
[Status 19:22:00 INFO] Starting Set [AERI set: name H345, 6 scans, 60 angle, D22500 command]
[Ingest 19:22:00 INFO] Sending XML status message
[Status 19:22:00 INFO] Mirror angle: 60
[Mirror 19:22:00 INFO] rotating to position H
[Status 19:22:02 INFO] .SET file for ACQ96 ready
[Ingest 19:22:02 INFO] Starting acquisition
[Status 19:22:02 INFO] reading housekeeping
[Status 19:22:20 INFO] acquire complete
[Status 19:22:21 INFO] writing housekeeping
[Sequencer 19:22:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:22:21 INFO] incremented H scene to 345 completed views
[Sequencer 19:22:21 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:22:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:22:21 INFO] incremented to [AERI set: name A345, 6 scans, 120 angle, D28300 command] set
[sigmove 19:22:21 INFO] H345.SIG(18)
[sigmove 19:22:21 DEBUG] transformed H345Ma.SPC -> H345MA.SPC
[sigmove 19:22:21 DEBUG] transformed H345Mb.SPC -> H345MB.SPC
[sigmove 19:22:21 DEBUG] transformed H345Mc.SPC -> H345MC.SPC
[sigmove 19:22:21 DEBUG] transformed H345Md.SPC -> H345MD.SPC
[sigmove 19:22:21 DEBUG] transformed H345Me.SPC -> H345ME.SPC
[sigmove 19:22:21 DEBUG] transformed H345Mf.SPC -> H345MF.SPC
[Status 19:22:21 INFO] data for H345 transferred to science data processing
[Tidy 19:22:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:22:21 INFO] A343.FIN(19),H343.FIN(19),S343.FIN(19),T343.FIN(19),U343.FIN(19),V343.FIN(19),W343.FIN(19),X343.FIN(19),Y343.FIN(19),Z343.FIN(19),A344.FIN(19),H344.FIN(19),S344.FIN(19),T344.FIN(19),U344.FIN(19),V344.FIN(19),W344.FIN(19),X344.FIN(19),Y344.FIN(19),Z344.FIN(19)
[sigmove 19:22:21 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:22:21 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:22:27 DEBUG] done zipping
[WatchDog 19:22:27 INFO] resetting WatchDogTimer
[Status 19:22:28 INFO] Starting Set [AERI set: name A345, 6 scans, 120 angle, D28300 command]
[Ingest 19:22:28 INFO] Sending XML status message
[Status 19:22:28 INFO] Mirror angle: 120
[Mirror 19:22:28 INFO] rotating to position A
[Status 19:22:29 INFO] .SET file for ACQ96 ready
[Ingest 19:22:30 INFO] Starting acquisition
[Status 19:22:30 INFO] reading housekeeping
[Status 19:22:48 INFO] acquire complete
[Status 19:22:49 INFO] writing housekeeping
[Sequencer 19:22:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:22:49 INFO] incremented A scene to 345 completed views
[Sequencer 19:22:49 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:22:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:22:49 INFO] incremented to [AERI set: name S345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:22:49 INFO] A345.SIG(18)
[sigmove 19:22:49 DEBUG] transformed A345Ma.SPC -> A345MA.SPC
[sigmove 19:22:49 DEBUG] transformed A345Mb.SPC -> A345MB.SPC
[sigmove 19:22:49 DEBUG] transformed A345Mc.SPC -> A345MC.SPC
[sigmove 19:22:49 DEBUG] transformed A345Md.SPC -> A345MD.SPC
[sigmove 19:22:49 DEBUG] transformed A345Me.SPC -> A345ME.SPC
[sigmove 19:22:49 DEBUG] transformed A345Mf.SPC -> A345MF.SPC
[Status 19:22:49 INFO] data for A345 transferred to science data processing
[Tidy 19:22:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:22:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:22:49 INFO] resetting WatchDogTimer
[Status 19:22:49 INFO] Starting Set [AERI set: name S345, 6 scans, 0 angle, D16300 command]
[Ingest 19:22:49 INFO] Sending XML status message
[Status 19:22:49 INFO] Mirror angle: 0
[Mirror 19:22:50 INFO] rotating to position S
[Status 19:22:52 INFO] .SET file for ACQ96 ready
[Ingest 19:22:52 INFO] Starting acquisition
[Status 19:22:52 INFO] reading housekeeping
[Status 19:23:10 INFO] acquire complete
[Status 19:23:11 INFO] writing housekeeping
[Sequencer 19:23:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:23:11 INFO] incremented S scene to 345 completed views
[Sequencer 19:23:11 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:23:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:23:11 INFO] incremented to [AERI set: name T345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:23:11 INFO] S345.SIG(18)
[sigmove 19:23:11 DEBUG] transformed S345Ma.SPC -> S345MA.SPC
[sigmove 19:23:11 DEBUG] transformed S345Mb.SPC -> S345MB.SPC
[sigmove 19:23:11 DEBUG] transformed S345Mc.SPC -> S345MC.SPC
[sigmove 19:23:11 DEBUG] transformed S345Md.SPC -> S345MD.SPC
[sigmove 19:23:11 DEBUG] transformed S345Me.SPC -> S345ME.SPC
[sigmove 19:23:11 DEBUG] transformed S345Mf.SPC -> S345MF.SPC
[Status 19:23:11 INFO] data for S345 transferred to science data processing
[Tidy 19:23:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:23:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:23:11 INFO] resetting WatchDogTimer
[Status 19:23:12 INFO] Starting Set [AERI set: name T345, 6 scans, 0 angle, D16300 command]
[Ingest 19:23:12 INFO] Sending XML status message
[Status 19:23:12 INFO] Mirror angle: 0
[Mirror 19:23:12 INFO] rotating to position T
[Status 19:23:13 INFO] .SET file for ACQ96 ready
[Ingest 19:23:13 INFO] Starting acquisition
[Status 19:23:14 INFO] reading housekeeping
[Status 19:23:32 INFO] acquire complete
[Status 19:23:33 INFO] writing housekeeping
[Sequencer 19:23:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:23:33 INFO] incremented T scene to 345 completed views
[Sequencer 19:23:33 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:23:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:23:33 INFO] incremented to [AERI set: name U345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:23:33 INFO] T345.SIG(18)
[sigmove 19:23:33 DEBUG] transformed T345Ma.SPC -> T345MA.SPC
[sigmove 19:23:33 DEBUG] transformed T345Mb.SPC -> T345MB.SPC
[sigmove 19:23:33 DEBUG] transformed T345Mc.SPC -> T345MC.SPC
[sigmove 19:23:33 DEBUG] transformed T345Md.SPC -> T345MD.SPC
[sigmove 19:23:33 DEBUG] transformed T345Me.SPC -> T345ME.SPC
[sigmove 19:23:33 DEBUG] transformed T345Mf.SPC -> T345MF.SPC
[Status 19:23:33 INFO] data for T345 transferred to science data processing
[Tidy 19:23:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:23:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:23:33 INFO] resetting WatchDogTimer
[Status 19:23:33 INFO] Starting Set [AERI set: name U345, 6 scans, 0 angle, D16300 command]
[Ingest 19:23:33 INFO] Sending XML status message
[Status 19:23:33 INFO] Mirror angle: 0
[Mirror 19:23:34 INFO] rotating to position U
[Status 19:23:34 INFO] .SET file for ACQ96 ready
[Ingest 19:23:34 INFO] Starting acquisition
[Status 19:23:35 INFO] reading housekeeping
[Status 19:23:53 INFO] acquire complete
[Status 19:23:54 INFO] writing housekeeping
[Sequencer 19:23:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:23:54 INFO] incremented U scene to 345 completed views
[Sequencer 19:23:54 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:23:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:23:54 INFO] incremented to [AERI set: name V345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:23:54 INFO] U345.SIG(18)
[sigmove 19:23:54 DEBUG] transformed U345Ma.SPC -> U345MA.SPC
[sigmove 19:23:54 DEBUG] transformed U345Mb.SPC -> U345MB.SPC
[sigmove 19:23:54 DEBUG] transformed U345Mc.SPC -> U345MC.SPC
[sigmove 19:23:54 DEBUG] transformed U345Md.SPC -> U345MD.SPC
[sigmove 19:23:54 DEBUG] transformed U345Me.SPC -> U345ME.SPC
[sigmove 19:23:54 DEBUG] transformed U345Mf.SPC -> U345MF.SPC
[Status 19:23:54 INFO] data for U345 transferred to science data processing
[Tidy 19:23:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:23:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:23:54 INFO] resetting WatchDogTimer
[Status 19:23:54 INFO] Starting Set [AERI set: name V345, 6 scans, 0 angle, D16300 command]
[Ingest 19:23:54 INFO] Sending XML status message
[Status 19:23:54 INFO] Mirror angle: 0
[Mirror 19:23:55 INFO] rotating to position V
[Status 19:23:55 INFO] .SET file for ACQ96 ready
[Ingest 19:23:56 INFO] Starting acquisition
[Status 19:23:56 INFO] reading housekeeping
[Status 19:24:14 INFO] acquire complete
[Status 19:24:15 INFO] writing housekeeping
[Sequencer 19:24:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:24:15 INFO] incremented V scene to 345 completed views
[Sequencer 19:24:15 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:24:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:24:15 INFO] incremented to [AERI set: name W345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:24:15 INFO] V345.SIG(18)
[sigmove 19:24:15 DEBUG] transformed V345Ma.SPC -> V345MA.SPC
[sigmove 19:24:15 DEBUG] transformed V345Mb.SPC -> V345MB.SPC
[sigmove 19:24:15 DEBUG] transformed V345Mc.SPC -> V345MC.SPC
[sigmove 19:24:15 DEBUG] transformed V345Md.SPC -> V345MD.SPC
[sigmove 19:24:15 DEBUG] transformed V345Me.SPC -> V345ME.SPC
[sigmove 19:24:15 DEBUG] transformed V345Mf.SPC -> V345MF.SPC
[Status 19:24:15 INFO] data for V345 transferred to science data processing
[Tidy 19:24:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:24:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:24:15 INFO] resetting WatchDogTimer
[Status 19:24:16 INFO] Starting Set [AERI set: name W345, 6 scans, 0 angle, D16300 command]
[Ingest 19:24:16 INFO] Sending XML status message
[Status 19:24:16 INFO] Mirror angle: 0
[Mirror 19:24:16 INFO] rotating to position W
[Status 19:24:17 INFO] .SET file for ACQ96 ready
[Ingest 19:24:17 INFO] Starting acquisition
[Status 19:24:18 INFO] reading housekeeping
[Status 19:24:35 INFO] acquire complete
[Status 19:24:37 INFO] writing housekeeping
[Sequencer 19:24:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:24:37 INFO] incremented W scene to 345 completed views
[Sequencer 19:24:37 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:24:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:24:37 INFO] incremented to [AERI set: name X345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:24:37 INFO] W345.SIG(18)
[sigmove 19:24:37 DEBUG] transformed W345Ma.SPC -> W345MA.SPC
[sigmove 19:24:37 DEBUG] transformed W345Mb.SPC -> W345MB.SPC
[sigmove 19:24:37 DEBUG] transformed W345Mc.SPC -> W345MC.SPC
[sigmove 19:24:37 DEBUG] transformed W345Md.SPC -> W345MD.SPC
[sigmove 19:24:37 DEBUG] transformed W345Me.SPC -> W345ME.SPC
[sigmove 19:24:37 DEBUG] transformed W345Mf.SPC -> W345MF.SPC
[Status 19:24:37 INFO] data for W345 transferred to science data processing
[Tidy 19:24:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:24:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:24:37 INFO] resetting WatchDogTimer
[Status 19:24:37 INFO] Starting Set [AERI set: name X345, 6 scans, 0 angle, D16300 command]
[Ingest 19:24:37 INFO] Sending XML status message
[Status 19:24:37 INFO] Mirror angle: 0
[Mirror 19:24:37 INFO] rotating to position X
[Status 19:24:38 INFO] .SET file for ACQ96 ready
[Ingest 19:24:38 INFO] Starting acquisition
[Status 19:24:39 INFO] reading housekeeping
[Status 19:24:57 INFO] acquire complete
[Status 19:24:58 INFO] writing housekeeping
[Sequencer 19:24:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:24:58 INFO] incremented X scene to 345 completed views
[Sequencer 19:24:58 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:24:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:24:58 INFO] incremented to [AERI set: name Y345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:24:58 INFO] X345.SIG(18)
[sigmove 19:24:58 DEBUG] transformed X345Ma.SPC -> X345MA.SPC
[sigmove 19:24:58 DEBUG] transformed X345Mb.SPC -> X345MB.SPC
[sigmove 19:24:58 DEBUG] transformed X345Mc.SPC -> X345MC.SPC
[sigmove 19:24:58 DEBUG] transformed X345Md.SPC -> X345MD.SPC
[sigmove 19:24:58 DEBUG] transformed X345Me.SPC -> X345ME.SPC
[sigmove 19:24:58 DEBUG] transformed X345Mf.SPC -> X345MF.SPC
[Status 19:24:58 INFO] data for X345 transferred to science data processing
[Tidy 19:24:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:24:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:24:58 INFO] resetting WatchDogTimer
[Status 19:24:58 INFO] Starting Set [AERI set: name Y345, 6 scans, 0 angle, D16300 command]
[Ingest 19:24:58 INFO] Sending XML status message
[Status 19:24:58 INFO] Mirror angle: 0
[Mirror 19:24:59 INFO] rotating to position Y
[Status 19:24:59 INFO] .SET file for ACQ96 ready
[Ingest 19:25:00 INFO] Starting acquisition
[Status 19:25:00 INFO] reading housekeeping
[Status 19:25:18 INFO] acquire complete
[Status 19:25:19 INFO] writing housekeeping
[Sequencer 19:25:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:25:19 INFO] incremented Y scene to 345 completed views
[Sequencer 19:25:19 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:25:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:25:19 INFO] incremented to [AERI set: name Z345, 6 scans, 0 angle, D16300 command] set
[sigmove 19:25:19 INFO] Y345.SIG(18)
[sigmove 19:25:19 DEBUG] transformed Y345Ma.SPC -> Y345MA.SPC
[sigmove 19:25:19 DEBUG] transformed Y345Mb.SPC -> Y345MB.SPC
[sigmove 19:25:19 DEBUG] transformed Y345Mc.SPC -> Y345MC.SPC
[sigmove 19:25:19 DEBUG] transformed Y345Md.SPC -> Y345MD.SPC
[sigmove 19:25:19 DEBUG] transformed Y345Me.SPC -> Y345ME.SPC
[sigmove 19:25:19 DEBUG] transformed Y345Mf.SPC -> Y345MF.SPC
[Status 19:25:19 INFO] data for Y345 transferred to science data processing
[Tidy 19:25:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:25:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:25:19 INFO] resetting WatchDogTimer
[Status 19:25:20 INFO] Starting Set [AERI set: name Z345, 6 scans, 0 angle, D16300 command]
[Ingest 19:25:20 INFO] Sending XML status message
[Status 19:25:20 INFO] Mirror angle: 0
[Mirror 19:25:20 INFO] rotating to position Z
[Status 19:25:21 INFO] .SET file for ACQ96 ready
[Ingest 19:25:21 INFO] Starting acquisition
[Status 19:25:22 INFO] reading housekeeping
[Status 19:25:39 INFO] acquire complete
[Status 19:25:41 INFO] writing housekeeping
[Sequencer 19:25:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:25:41 INFO] incremented Z scene to 345 completed views
[Sequencer 19:25:41 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:25:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:25:41 INFO] incremented to [AERI set: name A346, 6 scans, 120 angle, D28300 command] set
[sigmove 19:25:41 INFO] Z345.SIG(18)
[sigmove 19:25:41 DEBUG] transformed Z345Ma.SPC -> Z345MA.SPC
[sigmove 19:25:41 DEBUG] transformed Z345Mb.SPC -> Z345MB.SPC
[sigmove 19:25:41 DEBUG] transformed Z345Mc.SPC -> Z345MC.SPC
[sigmove 19:25:41 DEBUG] transformed Z345Md.SPC -> Z345MD.SPC
[sigmove 19:25:41 DEBUG] transformed Z345Me.SPC -> Z345ME.SPC
[sigmove 19:25:41 DEBUG] transformed Z345Mf.SPC -> Z345MF.SPC
[Status 19:25:41 INFO] data for Z345 transferred to science data processing
[Tidy 19:25:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:25:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:25:41 INFO] resetting WatchDogTimer
[Status 19:25:41 INFO] Starting Set [AERI set: name A346, 6 scans, 120 angle, D28300 command]
[Ingest 19:25:41 INFO] Sending XML status message
[Status 19:25:41 INFO] Mirror angle: 120
[Mirror 19:25:41 INFO] rotating to position A
[Status 19:25:43 INFO] .SET file for ACQ96 ready
[Ingest 19:25:43 INFO] Starting acquisition
[Status 19:25:44 INFO] reading housekeeping
[Status 19:26:02 INFO] acquire complete
[Status 19:26:03 INFO] writing housekeeping
[Sequencer 19:26:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:26:03 INFO] incremented A scene to 346 completed views
[Sequencer 19:26:03 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:26:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:26:03 INFO] incremented to [AERI set: name H346, 6 scans, 60 angle, D22500 command] set
[sigmove 19:26:03 INFO] A346.SIG(18)
[sigmove 19:26:03 DEBUG] transformed A346Ma.SPC -> A346MA.SPC
[sigmove 19:26:03 DEBUG] transformed A346Mb.SPC -> A346MB.SPC
[sigmove 19:26:03 DEBUG] transformed A346Mc.SPC -> A346MC.SPC
[sigmove 19:26:03 DEBUG] transformed A346Md.SPC -> A346MD.SPC
[sigmove 19:26:03 DEBUG] transformed A346Me.SPC -> A346ME.SPC
[sigmove 19:26:03 DEBUG] transformed A346Mf.SPC -> A346MF.SPC
[Status 19:26:03 INFO] data for A346 transferred to science data processing
[Tidy 19:26:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:26:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:26:03 INFO] resetting WatchDogTimer
[Status 19:26:03 INFO] Starting Set [AERI set: name H346, 6 scans, 60 angle, D22500 command]
[Ingest 19:26:03 INFO] Sending XML status message
[Status 19:26:03 INFO] Mirror angle: 60
[Mirror 19:26:04 INFO] rotating to position H
[Status 19:26:05 INFO] .SET file for ACQ96 ready
[Ingest 19:26:05 INFO] Starting acquisition
[Status 19:26:06 INFO] reading housekeeping
[Status 19:26:23 INFO] acquire complete
[Status 19:26:24 INFO] writing housekeeping
[Sequencer 19:26:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:26:24 INFO] incremented H scene to 346 completed views
[Sequencer 19:26:24 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:26:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:26:24 INFO] incremented to [AERI set: name S346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:26:24 INFO] H346.SIG(18)
[sigmove 19:26:24 DEBUG] transformed H346Ma.SPC -> H346MA.SPC
[sigmove 19:26:24 DEBUG] transformed H346Mb.SPC -> H346MB.SPC
[sigmove 19:26:24 DEBUG] transformed H346Mc.SPC -> H346MC.SPC
[sigmove 19:26:24 DEBUG] transformed H346Md.SPC -> H346MD.SPC
[sigmove 19:26:24 DEBUG] transformed H346Me.SPC -> H346ME.SPC
[sigmove 19:26:24 DEBUG] transformed H346Mf.SPC -> H346MF.SPC
[Status 19:26:24 INFO] data for H346 transferred to science data processing
[Tidy 19:26:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:26:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:26:24 INFO] resetting WatchDogTimer
[Status 19:26:25 INFO] Starting Set [AERI set: name S346, 6 scans, 0 angle, D16300 command]
[Ingest 19:26:25 INFO] Sending XML status message
[Status 19:26:25 INFO] Mirror angle: 0
[Mirror 19:26:25 INFO] rotating to position S
[Status 19:26:26 INFO] .SET file for ACQ96 ready
[Ingest 19:26:27 INFO] Starting acquisition
[Status 19:26:27 INFO] reading housekeeping
[Status 19:26:44 INFO] acquire complete
[Status 19:26:46 INFO] writing housekeeping
[Sequencer 19:26:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:26:46 INFO] incremented S scene to 346 completed views
[Sequencer 19:26:46 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:26:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:26:46 INFO] incremented to [AERI set: name T346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:26:46 INFO] S346.SIG(18)
[sigmove 19:26:46 DEBUG] transformed S346Ma.SPC -> S346MA.SPC
[sigmove 19:26:46 DEBUG] transformed S346Mb.SPC -> S346MB.SPC
[sigmove 19:26:46 DEBUG] transformed S346Mc.SPC -> S346MC.SPC
[sigmove 19:26:46 DEBUG] transformed S346Md.SPC -> S346MD.SPC
[sigmove 19:26:46 DEBUG] transformed S346Me.SPC -> S346ME.SPC
[sigmove 19:26:46 DEBUG] transformed S346Mf.SPC -> S346MF.SPC
[Status 19:26:46 INFO] data for S346 transferred to science data processing
[Tidy 19:26:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:26:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:26:46 INFO] resetting WatchDogTimer
[Status 19:26:46 INFO] Starting Set [AERI set: name T346, 6 scans, 0 angle, D16300 command]
[Ingest 19:26:46 INFO] Sending XML status message
[Status 19:26:46 INFO] Mirror angle: 0
[Mirror 19:26:47 INFO] rotating to position T
[Status 19:26:47 INFO] .SET file for ACQ96 ready
[Ingest 19:26:48 INFO] Starting acquisition
[Status 19:26:49 INFO] reading housekeeping
[Status 19:27:06 INFO] acquire complete
[Status 19:27:07 INFO] writing housekeeping
[Sequencer 19:27:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:27:07 INFO] incremented T scene to 346 completed views
[Sequencer 19:27:07 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:27:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:27:07 INFO] incremented to [AERI set: name U346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:27:07 INFO] T346.SIG(18)
[sigmove 19:27:07 DEBUG] transformed T346Ma.SPC -> T346MA.SPC
[sigmove 19:27:07 DEBUG] transformed T346Mb.SPC -> T346MB.SPC
[sigmove 19:27:07 DEBUG] transformed T346Mc.SPC -> T346MC.SPC
[sigmove 19:27:07 DEBUG] transformed T346Md.SPC -> T346MD.SPC
[sigmove 19:27:07 DEBUG] transformed T346Me.SPC -> T346ME.SPC
[sigmove 19:27:07 DEBUG] transformed T346Mf.SPC -> T346MF.SPC
[Status 19:27:07 INFO] data for T346 transferred to science data processing
[Tidy 19:27:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:27:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:27:07 INFO] resetting WatchDogTimer
[Status 19:27:07 INFO] Starting Set [AERI set: name U346, 6 scans, 0 angle, D16300 command]
[Ingest 19:27:07 INFO] Sending XML status message
[Status 19:27:07 INFO] Mirror angle: 0
[Mirror 19:27:08 INFO] rotating to position U
[Status 19:27:08 INFO] .SET file for ACQ96 ready
[Ingest 19:27:09 INFO] Starting acquisition
[Status 19:27:09 INFO] reading housekeeping
[Status 19:27:27 INFO] acquire complete
[Status 19:27:28 INFO] writing housekeeping
[Sequencer 19:27:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:27:28 INFO] incremented U scene to 346 completed views
[Sequencer 19:27:28 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:27:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:27:28 INFO] incremented to [AERI set: name V346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:27:28 INFO] U346.SIG(18)
[sigmove 19:27:28 DEBUG] transformed U346Ma.SPC -> U346MA.SPC
[sigmove 19:27:28 DEBUG] transformed U346Mb.SPC -> U346MB.SPC
[sigmove 19:27:28 DEBUG] transformed U346Mc.SPC -> U346MC.SPC
[sigmove 19:27:28 DEBUG] transformed U346Md.SPC -> U346MD.SPC
[sigmove 19:27:28 DEBUG] transformed U346Me.SPC -> U346ME.SPC
[sigmove 19:27:28 DEBUG] transformed U346Mf.SPC -> U346MF.SPC
[Status 19:27:28 INFO] data for U346 transferred to science data processing
[Tidy 19:27:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:27:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:27:28 INFO] resetting WatchDogTimer
[Status 19:27:29 INFO] Starting Set [AERI set: name V346, 6 scans, 0 angle, D16300 command]
[Ingest 19:27:29 INFO] Sending XML status message
[Status 19:27:29 INFO] Mirror angle: 0
[Mirror 19:27:29 INFO] rotating to position V
[Status 19:27:30 INFO] .SET file for ACQ96 ready
[Ingest 19:27:30 INFO] Starting acquisition
[Status 19:27:30 INFO] reading housekeeping
[Status 19:27:48 INFO] acquire complete
[Status 19:27:49 INFO] writing housekeeping
[Sequencer 19:27:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:27:49 INFO] incremented V scene to 346 completed views
[Sequencer 19:27:49 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:27:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:27:49 INFO] incremented to [AERI set: name W346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:27:50 INFO] V346.SIG(18)
[sigmove 19:27:50 DEBUG] transformed V346Ma.SPC -> V346MA.SPC
[sigmove 19:27:50 DEBUG] transformed V346Mb.SPC -> V346MB.SPC
[sigmove 19:27:50 DEBUG] transformed V346Mc.SPC -> V346MC.SPC
[sigmove 19:27:50 DEBUG] transformed V346Md.SPC -> V346MD.SPC
[sigmove 19:27:50 DEBUG] transformed V346Me.SPC -> V346ME.SPC
[sigmove 19:27:50 DEBUG] transformed V346Mf.SPC -> V346MF.SPC
[Status 19:27:50 INFO] data for V346 transferred to science data processing
[Tidy 19:27:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:27:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:27:50 INFO] resetting WatchDogTimer
[Status 19:27:50 INFO] Starting Set [AERI set: name W346, 6 scans, 0 angle, D16300 command]
[Ingest 19:27:50 INFO] Sending XML status message
[Status 19:27:50 INFO] Mirror angle: 0
[Mirror 19:27:50 INFO] rotating to position W
[Status 19:27:51 INFO] .SET file for ACQ96 ready
[Ingest 19:27:51 INFO] Starting acquisition
[Status 19:27:52 INFO] reading housekeeping
[Status 19:28:10 INFO] acquire complete
[Status 19:28:11 INFO] writing housekeeping
[Sequencer 19:28:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:28:11 INFO] incremented W scene to 346 completed views
[Sequencer 19:28:11 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:28:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:28:11 INFO] incremented to [AERI set: name X346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:28:11 INFO] W346.SIG(18)
[sigmove 19:28:11 DEBUG] transformed W346Ma.SPC -> W346MA.SPC
[sigmove 19:28:11 DEBUG] transformed W346Mb.SPC -> W346MB.SPC
[sigmove 19:28:11 DEBUG] transformed W346Mc.SPC -> W346MC.SPC
[sigmove 19:28:11 DEBUG] transformed W346Md.SPC -> W346MD.SPC
[sigmove 19:28:11 DEBUG] transformed W346Me.SPC -> W346ME.SPC
[sigmove 19:28:11 DEBUG] transformed W346Mf.SPC -> W346MF.SPC
[Status 19:28:11 INFO] data for W346 transferred to science data processing
[Tidy 19:28:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:28:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:28:11 INFO] resetting WatchDogTimer
[Status 19:28:11 INFO] Starting Set [AERI set: name X346, 6 scans, 0 angle, D16300 command]
[Ingest 19:28:11 INFO] Sending XML status message
[Status 19:28:11 INFO] Mirror angle: 0
[Mirror 19:28:12 INFO] rotating to position X
[Status 19:28:12 INFO] .SET file for ACQ96 ready
[Ingest 19:28:13 INFO] Starting acquisition
[Status 19:28:13 INFO] reading housekeeping
[Status 19:28:31 INFO] acquire complete
[Status 19:28:32 INFO] writing housekeeping
[Sequencer 19:28:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:28:32 INFO] incremented X scene to 346 completed views
[Sequencer 19:28:32 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:28:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:28:32 INFO] incremented to [AERI set: name Y346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:28:32 INFO] X346.SIG(18)
[sigmove 19:28:32 DEBUG] transformed X346Ma.SPC -> X346MA.SPC
[sigmove 19:28:32 DEBUG] transformed X346Mb.SPC -> X346MB.SPC
[sigmove 19:28:32 DEBUG] transformed X346Mc.SPC -> X346MC.SPC
[sigmove 19:28:32 DEBUG] transformed X346Md.SPC -> X346MD.SPC
[sigmove 19:28:32 DEBUG] transformed X346Me.SPC -> X346ME.SPC
[sigmove 19:28:32 DEBUG] transformed X346Mf.SPC -> X346MF.SPC
[Status 19:28:32 INFO] data for X346 transferred to science data processing
[Tidy 19:28:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:28:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:28:32 INFO] resetting WatchDogTimer
[Status 19:28:33 INFO] Starting Set [AERI set: name Y346, 6 scans, 0 angle, D16300 command]
[Ingest 19:28:33 INFO] Sending XML status message
[Status 19:28:33 INFO] Mirror angle: 0
[Mirror 19:28:33 INFO] rotating to position Y
[Status 19:28:34 INFO] .SET file for ACQ96 ready
[Ingest 19:28:34 INFO] Starting acquisition
[Status 19:28:34 INFO] reading housekeeping
[Status 19:28:52 INFO] acquire complete
[Status 19:28:53 INFO] writing housekeeping
[Sequencer 19:28:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:28:53 INFO] incremented Y scene to 346 completed views
[Sequencer 19:28:53 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:28:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:28:53 INFO] incremented to [AERI set: name Z346, 6 scans, 0 angle, D16300 command] set
[sigmove 19:28:53 INFO] Y346.SIG(18)
[sigmove 19:28:53 DEBUG] transformed Y346Ma.SPC -> Y346MA.SPC
[sigmove 19:28:53 DEBUG] transformed Y346Mb.SPC -> Y346MB.SPC
[sigmove 19:28:53 DEBUG] transformed Y346Mc.SPC -> Y346MC.SPC
[sigmove 19:28:53 DEBUG] transformed Y346Md.SPC -> Y346MD.SPC
[sigmove 19:28:53 DEBUG] transformed Y346Me.SPC -> Y346ME.SPC
[sigmove 19:28:53 DEBUG] transformed Y346Mf.SPC -> Y346MF.SPC
[Status 19:28:53 INFO] data for Y346 transferred to science data processing
[Tidy 19:28:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:28:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:28:53 INFO] resetting WatchDogTimer
[Status 19:28:54 INFO] Starting Set [AERI set: name Z346, 6 scans, 0 angle, D16300 command]
[Ingest 19:28:54 INFO] Sending XML status message
[Status 19:28:54 INFO] Mirror angle: 0
[Mirror 19:28:54 INFO] rotating to position Z
[Status 19:28:55 INFO] .SET file for ACQ96 ready
[Ingest 19:28:55 INFO] Starting acquisition
[Status 19:28:56 INFO] reading housekeeping
[Status 19:29:14 INFO] acquire complete
[Status 19:29:15 INFO] writing housekeeping
[Sequencer 19:29:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:29:15 INFO] incremented Z scene to 346 completed views
[Sequencer 19:29:15 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:29:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:29:15 INFO] incremented to [AERI set: name H347, 6 scans, 60 angle, D22500 command] set
[sigmove 19:29:15 INFO] Z346.SIG(18)
[sigmove 19:29:15 DEBUG] transformed Z346Ma.SPC -> Z346MA.SPC
[sigmove 19:29:15 DEBUG] transformed Z346Mb.SPC -> Z346MB.SPC
[sigmove 19:29:15 DEBUG] transformed Z346Mc.SPC -> Z346MC.SPC
[sigmove 19:29:15 DEBUG] transformed Z346Md.SPC -> Z346MD.SPC
[sigmove 19:29:15 DEBUG] transformed Z346Me.SPC -> Z346ME.SPC
[sigmove 19:29:15 DEBUG] transformed Z346Mf.SPC -> Z346MF.SPC
[Status 19:29:15 INFO] data for Z346 transferred to science data processing
[Tidy 19:29:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:29:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:29:15 INFO] resetting WatchDogTimer
[Status 19:29:15 INFO] Starting Set [AERI set: name H347, 6 scans, 60 angle, D22500 command]
[Ingest 19:29:15 INFO] Sending XML status message
[Status 19:29:15 INFO] Mirror angle: 60
[Mirror 19:29:16 INFO] rotating to position H
[Status 19:29:17 INFO] .SET file for ACQ96 ready
[Ingest 19:29:17 INFO] Starting acquisition
[Status 19:29:18 INFO] reading housekeeping
[Status 19:29:35 INFO] acquire complete
[Status 19:29:36 INFO] writing housekeeping
[Sequencer 19:29:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:29:36 INFO] incremented H scene to 347 completed views
[Sequencer 19:29:36 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:29:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:29:36 INFO] incremented to [AERI set: name A347, 6 scans, 120 angle, D28300 command] set
[sigmove 19:29:36 INFO] H347.SIG(18)
[sigmove 19:29:36 DEBUG] transformed H347Ma.SPC -> H347MA.SPC
[sigmove 19:29:36 DEBUG] transformed H347Mb.SPC -> H347MB.SPC
[sigmove 19:29:36 DEBUG] transformed H347Mc.SPC -> H347MC.SPC
[sigmove 19:29:36 DEBUG] transformed H347Md.SPC -> H347MD.SPC
[sigmove 19:29:36 DEBUG] transformed H347Me.SPC -> H347ME.SPC
[sigmove 19:29:36 DEBUG] transformed H347Mf.SPC -> H347MF.SPC
[Status 19:29:36 INFO] data for H347 transferred to science data processing
[Tidy 19:29:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:29:36 INFO] A345.FIN(19),H345.FIN(19),S345.FIN(19),T345.FIN(19),U345.FIN(19),V345.FIN(19),W345.FIN(19),X345.FIN(19),Y345.FIN(19),Z345.FIN(19),A346.FIN(19),H346.FIN(19),S346.FIN(19),T346.FIN(19),U346.FIN(19),V346.FIN(19),W346.FIN(19),X346.FIN(19),Y346.FIN(19),Z346.FIN(19)
[sigmove 19:29:36 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:29:36 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:29:42 DEBUG] done zipping
[WatchDog 19:29:43 INFO] resetting WatchDogTimer
[Status 19:29:43 INFO] Starting Set [AERI set: name A347, 6 scans, 120 angle, D28300 command]
[Ingest 19:29:43 INFO] Sending XML status message
[Status 19:29:43 INFO] Mirror angle: 120
[Mirror 19:29:44 INFO] rotating to position A
[Status 19:29:45 INFO] .SET file for ACQ96 ready
[Ingest 19:29:45 INFO] Starting acquisition
[Status 19:29:45 INFO] reading housekeeping
[Status 19:30:03 INFO] acquire complete
[Status 19:30:04 INFO] writing housekeeping
[Sequencer 19:30:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:30:04 INFO] incremented A scene to 347 completed views
[Sequencer 19:30:04 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:30:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:30:04 INFO] incremented to [AERI set: name S347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:30:04 INFO] A347.SIG(18)
[sigmove 19:30:04 DEBUG] transformed A347Ma.SPC -> A347MA.SPC
[sigmove 19:30:04 DEBUG] transformed A347Mb.SPC -> A347MB.SPC
[sigmove 19:30:04 DEBUG] transformed A347Mc.SPC -> A347MC.SPC
[sigmove 19:30:04 DEBUG] transformed A347Md.SPC -> A347MD.SPC
[sigmove 19:30:04 DEBUG] transformed A347Me.SPC -> A347ME.SPC
[sigmove 19:30:04 DEBUG] transformed A347Mf.SPC -> A347MF.SPC
[Status 19:30:04 INFO] data for A347 transferred to science data processing
[Tidy 19:30:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:30:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:30:04 INFO] resetting WatchDogTimer
[Status 19:30:05 INFO] Starting Set [AERI set: name S347, 6 scans, 0 angle, D16300 command]
[Ingest 19:30:05 INFO] Sending XML status message
[Status 19:30:05 INFO] Mirror angle: 0
[Mirror 19:30:05 INFO] rotating to position S
[Status 19:30:07 INFO] .SET file for ACQ96 ready
[Ingest 19:30:07 INFO] Starting acquisition
[Status 19:30:07 INFO] reading housekeeping
[Status 19:30:25 INFO] acquire complete
[Status 19:30:27 INFO] writing housekeeping
[Sequencer 19:30:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:30:27 INFO] incremented S scene to 347 completed views
[Sequencer 19:30:27 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:30:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:30:27 INFO] incremented to [AERI set: name T347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:30:27 INFO] S347.SIG(18)
[sigmove 19:30:27 DEBUG] transformed S347Ma.SPC -> S347MA.SPC
[sigmove 19:30:27 DEBUG] transformed S347Mb.SPC -> S347MB.SPC
[sigmove 19:30:27 DEBUG] transformed S347Mc.SPC -> S347MC.SPC
[sigmove 19:30:27 DEBUG] transformed S347Md.SPC -> S347MD.SPC
[sigmove 19:30:27 DEBUG] transformed S347Me.SPC -> S347ME.SPC
[sigmove 19:30:27 DEBUG] transformed S347Mf.SPC -> S347MF.SPC
[Status 19:30:27 INFO] data for S347 transferred to science data processing
[Tidy 19:30:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:30:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:30:27 INFO] resetting WatchDogTimer
[Status 19:30:27 INFO] Starting Set [AERI set: name T347, 6 scans, 0 angle, D16300 command]
[Ingest 19:30:27 INFO] Sending XML status message
[Status 19:30:27 INFO] Mirror angle: 0
[Mirror 19:30:27 INFO] rotating to position T
[Status 19:30:28 INFO] .SET file for ACQ96 ready
[Ingest 19:30:28 INFO] Starting acquisition
[Status 19:30:29 INFO] reading housekeeping
[Status 19:30:47 INFO] acquire complete
[Status 19:30:48 INFO] writing housekeeping
[Sequencer 19:30:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:30:48 INFO] incremented T scene to 347 completed views
[Sequencer 19:30:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:30:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:30:48 INFO] incremented to [AERI set: name U347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:30:48 INFO] T347.SIG(18)
[sigmove 19:30:48 DEBUG] transformed T347Ma.SPC -> T347MA.SPC
[sigmove 19:30:48 DEBUG] transformed T347Mb.SPC -> T347MB.SPC
[sigmove 19:30:48 DEBUG] transformed T347Mc.SPC -> T347MC.SPC
[sigmove 19:30:48 DEBUG] transformed T347Md.SPC -> T347MD.SPC
[sigmove 19:30:48 DEBUG] transformed T347Me.SPC -> T347ME.SPC
[sigmove 19:30:48 DEBUG] transformed T347Mf.SPC -> T347MF.SPC
[Status 19:30:48 INFO] data for T347 transferred to science data processing
[Tidy 19:30:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:30:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:30:48 INFO] resetting WatchDogTimer
[Status 19:30:48 INFO] Starting Set [AERI set: name U347, 6 scans, 0 angle, D16300 command]
[Ingest 19:30:48 INFO] Sending XML status message
[Status 19:30:48 INFO] Mirror angle: 0
[Mirror 19:30:49 INFO] rotating to position U
[Status 19:30:49 INFO] .SET file for ACQ96 ready
[Ingest 19:30:50 INFO] Starting acquisition
[Status 19:30:50 INFO] reading housekeeping
[Status 19:31:08 INFO] acquire complete
[Status 19:31:09 INFO] writing housekeeping
[Sequencer 19:31:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:31:09 INFO] incremented U scene to 347 completed views
[Sequencer 19:31:09 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:31:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:31:09 INFO] incremented to [AERI set: name V347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:31:09 INFO] U347.SIG(18)
[sigmove 19:31:09 DEBUG] transformed U347Ma.SPC -> U347MA.SPC
[sigmove 19:31:09 DEBUG] transformed U347Mb.SPC -> U347MB.SPC
[sigmove 19:31:09 DEBUG] transformed U347Mc.SPC -> U347MC.SPC
[sigmove 19:31:09 DEBUG] transformed U347Md.SPC -> U347MD.SPC
[sigmove 19:31:09 DEBUG] transformed U347Me.SPC -> U347ME.SPC
[sigmove 19:31:09 DEBUG] transformed U347Mf.SPC -> U347MF.SPC
[Status 19:31:09 INFO] data for U347 transferred to science data processing
[Tidy 19:31:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:31:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:31:09 INFO] resetting WatchDogTimer
[Status 19:31:10 INFO] Starting Set [AERI set: name V347, 6 scans, 0 angle, D16300 command]
[Ingest 19:31:10 INFO] Sending XML status message
[Status 19:31:10 INFO] Mirror angle: 0
[Mirror 19:31:10 INFO] rotating to position V
[Status 19:31:11 INFO] .SET file for ACQ96 ready
[Ingest 19:31:11 INFO] Starting acquisition
[Status 19:31:12 INFO] reading housekeeping
[Status 19:31:29 INFO] acquire complete
[Status 19:31:30 INFO] writing housekeeping
[Sequencer 19:31:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:31:30 INFO] incremented V scene to 347 completed views
[Sequencer 19:31:30 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:31:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:31:30 INFO] incremented to [AERI set: name W347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:31:30 INFO] V347.SIG(18)
[sigmove 19:31:30 DEBUG] transformed V347Ma.SPC -> V347MA.SPC
[sigmove 19:31:30 DEBUG] transformed V347Mb.SPC -> V347MB.SPC
[sigmove 19:31:30 DEBUG] transformed V347Mc.SPC -> V347MC.SPC
[sigmove 19:31:30 DEBUG] transformed V347Md.SPC -> V347MD.SPC
[sigmove 19:31:30 DEBUG] transformed V347Me.SPC -> V347ME.SPC
[sigmove 19:31:30 DEBUG] transformed V347Mf.SPC -> V347MF.SPC
[Status 19:31:30 INFO] data for V347 transferred to science data processing
[Tidy 19:31:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:31:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:31:30 INFO] resetting WatchDogTimer
[Status 19:31:31 INFO] Starting Set [AERI set: name W347, 6 scans, 0 angle, D16300 command]
[Ingest 19:31:31 INFO] Sending XML status message
[Status 19:31:31 INFO] Mirror angle: 0
[Mirror 19:31:31 INFO] rotating to position W
[Status 19:31:32 INFO] .SET file for ACQ96 ready
[Ingest 19:31:32 INFO] Starting acquisition
[Status 19:31:33 INFO] reading housekeeping
[Status 19:31:51 INFO] acquire complete
[Status 19:31:52 INFO] writing housekeeping
[Sequencer 19:31:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:31:52 INFO] incremented W scene to 347 completed views
[Sequencer 19:31:52 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:31:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:31:52 INFO] incremented to [AERI set: name X347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:31:52 INFO] W347.SIG(18)
[sigmove 19:31:52 DEBUG] transformed W347Ma.SPC -> W347MA.SPC
[sigmove 19:31:52 DEBUG] transformed W347Mb.SPC -> W347MB.SPC
[sigmove 19:31:52 DEBUG] transformed W347Mc.SPC -> W347MC.SPC
[sigmove 19:31:52 DEBUG] transformed W347Md.SPC -> W347MD.SPC
[sigmove 19:31:52 DEBUG] transformed W347Me.SPC -> W347ME.SPC
[sigmove 19:31:52 DEBUG] transformed W347Mf.SPC -> W347MF.SPC
[Status 19:31:52 INFO] data for W347 transferred to science data processing
[Tidy 19:31:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:31:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:31:52 INFO] resetting WatchDogTimer
[Status 19:31:52 INFO] Starting Set [AERI set: name X347, 6 scans, 0 angle, D16300 command]
[Ingest 19:31:52 INFO] Sending XML status message
[Status 19:31:52 INFO] Mirror angle: 0
[Mirror 19:31:53 INFO] rotating to position X
[Status 19:31:53 INFO] .SET file for ACQ96 ready
[Ingest 19:31:54 INFO] Starting acquisition
[Status 19:31:54 INFO] reading housekeeping
[Status 19:32:12 INFO] acquire complete
[Status 19:32:13 INFO] writing housekeeping
[Sequencer 19:32:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:32:13 INFO] incremented X scene to 347 completed views
[Sequencer 19:32:13 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:32:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:32:13 INFO] incremented to [AERI set: name Y347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:32:13 INFO] X347.SIG(18)
[sigmove 19:32:13 DEBUG] transformed X347Ma.SPC -> X347MA.SPC
[sigmove 19:32:13 DEBUG] transformed X347Mb.SPC -> X347MB.SPC
[sigmove 19:32:13 DEBUG] transformed X347Mc.SPC -> X347MC.SPC
[sigmove 19:32:13 DEBUG] transformed X347Md.SPC -> X347MD.SPC
[sigmove 19:32:13 DEBUG] transformed X347Me.SPC -> X347ME.SPC
[sigmove 19:32:13 DEBUG] transformed X347Mf.SPC -> X347MF.SPC
[Status 19:32:13 INFO] data for X347 transferred to science data processing
[Tidy 19:32:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:32:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:32:13 INFO] resetting WatchDogTimer
[Status 19:32:14 INFO] Starting Set [AERI set: name Y347, 6 scans, 0 angle, D16300 command]
[Ingest 19:32:14 INFO] Sending XML status message
[Status 19:32:14 INFO] Mirror angle: 0
[Mirror 19:32:14 INFO] rotating to position Y
[Status 19:32:15 INFO] .SET file for ACQ96 ready
[Ingest 19:32:15 INFO] Starting acquisition
[Status 19:32:15 INFO] reading housekeeping
[Status 19:32:33 INFO] acquire complete
[Status 19:32:34 INFO] writing housekeeping
[Sequencer 19:32:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:32:34 INFO] incremented Y scene to 347 completed views
[Sequencer 19:32:34 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:32:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:32:34 INFO] incremented to [AERI set: name Z347, 6 scans, 0 angle, D16300 command] set
[sigmove 19:32:34 INFO] Y347.SIG(18)
[sigmove 19:32:34 DEBUG] transformed Y347Ma.SPC -> Y347MA.SPC
[sigmove 19:32:34 DEBUG] transformed Y347Mb.SPC -> Y347MB.SPC
[sigmove 19:32:34 DEBUG] transformed Y347Mc.SPC -> Y347MC.SPC
[sigmove 19:32:34 DEBUG] transformed Y347Md.SPC -> Y347MD.SPC
[sigmove 19:32:34 DEBUG] transformed Y347Me.SPC -> Y347ME.SPC
[sigmove 19:32:34 DEBUG] transformed Y347Mf.SPC -> Y347MF.SPC
[Status 19:32:34 INFO] data for Y347 transferred to science data processing
[Tidy 19:32:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:32:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:32:34 INFO] resetting WatchDogTimer
[Status 19:32:35 INFO] Starting Set [AERI set: name Z347, 6 scans, 0 angle, D16300 command]
[Ingest 19:32:35 INFO] Sending XML status message
[Status 19:32:35 INFO] Mirror angle: 0
[Mirror 19:32:35 INFO] rotating to position Z
[Status 19:32:36 INFO] .SET file for ACQ96 ready
[Ingest 19:32:36 INFO] Starting acquisition
[Status 19:32:37 INFO] reading housekeeping
[Status 19:32:55 INFO] acquire complete
[Status 19:32:56 INFO] writing housekeeping
[Sequencer 19:32:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:32:56 INFO] incremented Z scene to 347 completed views
[Sequencer 19:32:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:32:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:32:56 INFO] incremented to [AERI set: name A348, 6 scans, 120 angle, D28300 command] set
[sigmove 19:32:56 INFO] Z347.SIG(18)
[sigmove 19:32:56 DEBUG] transformed Z347Ma.SPC -> Z347MA.SPC
[sigmove 19:32:56 DEBUG] transformed Z347Mb.SPC -> Z347MB.SPC
[sigmove 19:32:56 DEBUG] transformed Z347Mc.SPC -> Z347MC.SPC
[sigmove 19:32:56 DEBUG] transformed Z347Md.SPC -> Z347MD.SPC
[sigmove 19:32:56 DEBUG] transformed Z347Me.SPC -> Z347ME.SPC
[sigmove 19:32:56 DEBUG] transformed Z347Mf.SPC -> Z347MF.SPC
[Status 19:32:56 INFO] data for Z347 transferred to science data processing
[Tidy 19:32:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:32:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:32:56 INFO] resetting WatchDogTimer
[Status 19:32:56 INFO] Starting Set [AERI set: name A348, 6 scans, 120 angle, D28300 command]
[Ingest 19:32:56 INFO] Sending XML status message
[Status 19:32:56 INFO] Mirror angle: 120
[Mirror 19:32:57 INFO] rotating to position A
[Status 19:32:58 INFO] .SET file for ACQ96 ready
[Ingest 19:32:59 INFO] Starting acquisition
[Status 19:32:59 INFO] reading housekeeping
[Status 19:33:17 INFO] acquire complete
[Status 19:33:18 INFO] writing housekeeping
[Sequencer 19:33:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:33:18 INFO] incremented A scene to 348 completed views
[Sequencer 19:33:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:33:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:33:18 INFO] incremented to [AERI set: name H348, 6 scans, 60 angle, D22500 command] set
[sigmove 19:33:18 INFO] A348.SIG(18)
[sigmove 19:33:18 DEBUG] transformed A348Ma.SPC -> A348MA.SPC
[sigmove 19:33:18 DEBUG] transformed A348Mb.SPC -> A348MB.SPC
[sigmove 19:33:18 DEBUG] transformed A348Mc.SPC -> A348MC.SPC
[sigmove 19:33:18 DEBUG] transformed A348Md.SPC -> A348MD.SPC
[sigmove 19:33:18 DEBUG] transformed A348Me.SPC -> A348ME.SPC
[sigmove 19:33:18 DEBUG] transformed A348Mf.SPC -> A348MF.SPC
[Status 19:33:18 INFO] data for A348 transferred to science data processing
[Tidy 19:33:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:33:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:33:18 INFO] resetting WatchDogTimer
[Status 19:33:19 INFO] Starting Set [AERI set: name H348, 6 scans, 60 angle, D22500 command]
[Ingest 19:33:19 INFO] Sending XML status message
[Status 19:33:19 INFO] Mirror angle: 60
[Mirror 19:33:19 INFO] rotating to position H
[Status 19:33:20 INFO] .SET file for ACQ96 ready
[Ingest 19:33:20 INFO] Starting acquisition
[Status 19:33:21 INFO] reading housekeeping
[Status 19:33:38 INFO] acquire complete
[Status 19:33:39 INFO] writing housekeeping
[Sequencer 19:33:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:33:39 INFO] incremented H scene to 348 completed views
[Sequencer 19:33:39 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:33:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:33:39 INFO] incremented to [AERI set: name S348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:33:39 INFO] H348.SIG(18)
[sigmove 19:33:39 DEBUG] transformed H348Ma.SPC -> H348MA.SPC
[sigmove 19:33:39 DEBUG] transformed H348Mb.SPC -> H348MB.SPC
[sigmove 19:33:39 DEBUG] transformed H348Mc.SPC -> H348MC.SPC
[sigmove 19:33:39 DEBUG] transformed H348Md.SPC -> H348MD.SPC
[sigmove 19:33:39 DEBUG] transformed H348Me.SPC -> H348ME.SPC
[sigmove 19:33:39 DEBUG] transformed H348Mf.SPC -> H348MF.SPC
[Status 19:33:39 INFO] data for H348 transferred to science data processing
[Tidy 19:33:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:33:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:33:39 INFO] resetting WatchDogTimer
[Status 19:33:40 INFO] Starting Set [AERI set: name S348, 6 scans, 0 angle, D16300 command]
[Ingest 19:33:40 INFO] Sending XML status message
[Status 19:33:40 INFO] Mirror angle: 0
[Mirror 19:33:40 INFO] rotating to position S
[Status 19:33:42 INFO] .SET file for ACQ96 ready
[Ingest 19:33:42 INFO] Starting acquisition
[Status 19:33:42 INFO] reading housekeeping
[Status 19:34:00 INFO] acquire complete
[Status 19:34:01 INFO] writing housekeeping
[Sequencer 19:34:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:34:01 INFO] incremented S scene to 348 completed views
[Sequencer 19:34:01 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:34:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:34:01 INFO] incremented to [AERI set: name T348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:34:01 INFO] S348.SIG(18)
[sigmove 19:34:01 DEBUG] transformed S348Ma.SPC -> S348MA.SPC
[sigmove 19:34:01 DEBUG] transformed S348Mb.SPC -> S348MB.SPC
[sigmove 19:34:01 DEBUG] transformed S348Mc.SPC -> S348MC.SPC
[sigmove 19:34:01 DEBUG] transformed S348Md.SPC -> S348MD.SPC
[sigmove 19:34:01 DEBUG] transformed S348Me.SPC -> S348ME.SPC
[sigmove 19:34:01 DEBUG] transformed S348Mf.SPC -> S348MF.SPC
[Status 19:34:01 INFO] data for S348 transferred to science data processing
[Tidy 19:34:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:34:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:34:01 INFO] resetting WatchDogTimer
[Status 19:34:01 INFO] Starting Set [AERI set: name T348, 6 scans, 0 angle, D16300 command]
[Ingest 19:34:01 INFO] Sending XML status message
[Status 19:34:01 INFO] Mirror angle: 0
[Mirror 19:34:02 INFO] rotating to position T
[Status 19:34:02 INFO] .SET file for ACQ96 ready
[Ingest 19:34:03 INFO] Starting acquisition
[Status 19:34:03 INFO] reading housekeeping
[Status 19:34:21 INFO] acquire complete
[Status 19:34:22 INFO] writing housekeeping
[Sequencer 19:34:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:34:22 INFO] incremented T scene to 348 completed views
[Sequencer 19:34:22 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:34:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:34:22 INFO] incremented to [AERI set: name U348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:34:22 INFO] T348.SIG(18)
[sigmove 19:34:22 DEBUG] transformed T348Ma.SPC -> T348MA.SPC
[sigmove 19:34:22 DEBUG] transformed T348Mb.SPC -> T348MB.SPC
[sigmove 19:34:22 DEBUG] transformed T348Mc.SPC -> T348MC.SPC
[sigmove 19:34:22 DEBUG] transformed T348Md.SPC -> T348MD.SPC
[sigmove 19:34:22 DEBUG] transformed T348Me.SPC -> T348ME.SPC
[sigmove 19:34:22 DEBUG] transformed T348Mf.SPC -> T348MF.SPC
[Status 19:34:22 INFO] data for T348 transferred to science data processing
[Tidy 19:34:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:34:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:34:22 INFO] resetting WatchDogTimer
[Status 19:34:23 INFO] Starting Set [AERI set: name U348, 6 scans, 0 angle, D16300 command]
[Ingest 19:34:23 INFO] Sending XML status message
[Status 19:34:23 INFO] Mirror angle: 0
[Mirror 19:34:23 INFO] rotating to position U
[Status 19:34:23 INFO] .SET file for ACQ96 ready
[Ingest 19:34:24 INFO] Starting acquisition
[Status 19:34:24 INFO] reading housekeeping
[Status 19:34:42 INFO] acquire complete
[Status 19:34:43 INFO] writing housekeeping
[Sequencer 19:34:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:34:43 INFO] incremented U scene to 348 completed views
[Sequencer 19:34:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:34:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:34:43 INFO] incremented to [AERI set: name V348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:34:43 INFO] U348.SIG(18)
[sigmove 19:34:43 DEBUG] transformed U348Ma.SPC -> U348MA.SPC
[sigmove 19:34:43 DEBUG] transformed U348Mb.SPC -> U348MB.SPC
[sigmove 19:34:43 DEBUG] transformed U348Mc.SPC -> U348MC.SPC
[sigmove 19:34:43 DEBUG] transformed U348Md.SPC -> U348MD.SPC
[sigmove 19:34:43 DEBUG] transformed U348Me.SPC -> U348ME.SPC
[sigmove 19:34:43 DEBUG] transformed U348Mf.SPC -> U348MF.SPC
[Status 19:34:43 INFO] data for U348 transferred to science data processing
[Tidy 19:34:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:34:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:34:43 INFO] resetting WatchDogTimer
[Status 19:34:44 INFO] Starting Set [AERI set: name V348, 6 scans, 0 angle, D16300 command]
[Ingest 19:34:44 INFO] Sending XML status message
[Status 19:34:44 INFO] Mirror angle: 0
[Mirror 19:34:44 INFO] rotating to position V
[Status 19:34:45 INFO] .SET file for ACQ96 ready
[Ingest 19:34:45 INFO] Starting acquisition
[Status 19:34:46 INFO] reading housekeeping
[Status 19:35:04 INFO] acquire complete
[Status 19:35:05 INFO] writing housekeeping
[Sequencer 19:35:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:35:05 INFO] incremented V scene to 348 completed views
[Sequencer 19:35:05 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:35:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:35:05 INFO] incremented to [AERI set: name W348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:35:05 INFO] V348.SIG(18)
[sigmove 19:35:05 DEBUG] transformed V348Ma.SPC -> V348MA.SPC
[sigmove 19:35:05 DEBUG] transformed V348Mb.SPC -> V348MB.SPC
[sigmove 19:35:05 DEBUG] transformed V348Mc.SPC -> V348MC.SPC
[sigmove 19:35:05 DEBUG] transformed V348Md.SPC -> V348MD.SPC
[sigmove 19:35:05 DEBUG] transformed V348Me.SPC -> V348ME.SPC
[sigmove 19:35:05 DEBUG] transformed V348Mf.SPC -> V348MF.SPC
[Status 19:35:05 INFO] data for V348 transferred to science data processing
[Tidy 19:35:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:35:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:35:05 INFO] resetting WatchDogTimer
[Status 19:35:05 INFO] Starting Set [AERI set: name W348, 6 scans, 0 angle, D16300 command]
[Ingest 19:35:05 INFO] Sending XML status message
[Status 19:35:05 INFO] Mirror angle: 0
[Mirror 19:35:06 INFO] rotating to position W
[Status 19:35:06 INFO] .SET file for ACQ96 ready
[Ingest 19:35:07 INFO] Starting acquisition
[Status 19:35:07 INFO] reading housekeeping
[Status 19:35:25 INFO] acquire complete
[Status 19:35:26 INFO] writing housekeeping
[Sequencer 19:35:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:35:26 INFO] incremented W scene to 348 completed views
[Sequencer 19:35:26 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:35:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:35:26 INFO] incremented to [AERI set: name X348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:35:26 INFO] W348.SIG(18)
[sigmove 19:35:26 DEBUG] transformed W348Ma.SPC -> W348MA.SPC
[sigmove 19:35:26 DEBUG] transformed W348Mb.SPC -> W348MB.SPC
[sigmove 19:35:26 DEBUG] transformed W348Mc.SPC -> W348MC.SPC
[sigmove 19:35:26 DEBUG] transformed W348Md.SPC -> W348MD.SPC
[sigmove 19:35:26 DEBUG] transformed W348Me.SPC -> W348ME.SPC
[sigmove 19:35:26 DEBUG] transformed W348Mf.SPC -> W348MF.SPC
[Status 19:35:26 INFO] data for W348 transferred to science data processing
[Tidy 19:35:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:35:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:35:26 INFO] resetting WatchDogTimer
[Status 19:35:26 INFO] Starting Set [AERI set: name X348, 6 scans, 0 angle, D16300 command]
[Ingest 19:35:26 INFO] Sending XML status message
[Status 19:35:26 INFO] Mirror angle: 0
[Mirror 19:35:27 INFO] rotating to position X
[Status 19:35:27 INFO] .SET file for ACQ96 ready
[Ingest 19:35:28 INFO] Starting acquisition
[Status 19:35:28 INFO] reading housekeeping
[Status 19:35:46 INFO] acquire complete
[Status 19:35:47 INFO] writing housekeeping
[Sequencer 19:35:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:35:47 INFO] incremented X scene to 348 completed views
[Sequencer 19:35:47 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:35:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:35:47 INFO] incremented to [AERI set: name Y348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:35:47 INFO] X348.SIG(18)
[sigmove 19:35:47 DEBUG] transformed X348Ma.SPC -> X348MA.SPC
[sigmove 19:35:47 DEBUG] transformed X348Mb.SPC -> X348MB.SPC
[sigmove 19:35:47 DEBUG] transformed X348Mc.SPC -> X348MC.SPC
[sigmove 19:35:47 DEBUG] transformed X348Md.SPC -> X348MD.SPC
[sigmove 19:35:47 DEBUG] transformed X348Me.SPC -> X348ME.SPC
[sigmove 19:35:47 DEBUG] transformed X348Mf.SPC -> X348MF.SPC
[Status 19:35:47 INFO] data for X348 transferred to science data processing
[Tidy 19:35:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:35:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:35:47 INFO] resetting WatchDogTimer
[Status 19:35:48 INFO] Starting Set [AERI set: name Y348, 6 scans, 0 angle, D16300 command]
[Ingest 19:35:48 INFO] Sending XML status message
[Status 19:35:48 INFO] Mirror angle: 0
[Mirror 19:35:48 INFO] rotating to position Y
[Status 19:35:49 INFO] .SET file for ACQ96 ready
[Ingest 19:35:49 INFO] Starting acquisition
[Status 19:35:50 INFO] reading housekeeping
[Status 19:36:08 INFO] acquire complete
[Status 19:36:09 INFO] writing housekeeping
[Sequencer 19:36:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:36:09 INFO] incremented Y scene to 348 completed views
[Sequencer 19:36:09 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:36:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:36:09 INFO] incremented to [AERI set: name Z348, 6 scans, 0 angle, D16300 command] set
[sigmove 19:36:09 INFO] Y348.SIG(18)
[sigmove 19:36:09 DEBUG] transformed Y348Ma.SPC -> Y348MA.SPC
[sigmove 19:36:09 DEBUG] transformed Y348Mb.SPC -> Y348MB.SPC
[sigmove 19:36:09 DEBUG] transformed Y348Mc.SPC -> Y348MC.SPC
[sigmove 19:36:09 DEBUG] transformed Y348Md.SPC -> Y348MD.SPC
[sigmove 19:36:09 DEBUG] transformed Y348Me.SPC -> Y348ME.SPC
[sigmove 19:36:09 DEBUG] transformed Y348Mf.SPC -> Y348MF.SPC
[Status 19:36:09 INFO] data for Y348 transferred to science data processing
[Tidy 19:36:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:36:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:36:09 INFO] resetting WatchDogTimer
[Status 19:36:09 INFO] Starting Set [AERI set: name Z348, 6 scans, 0 angle, D16300 command]
[Ingest 19:36:09 INFO] Sending XML status message
[Status 19:36:09 INFO] Mirror angle: 0
[Mirror 19:36:10 INFO] rotating to position Z
[Status 19:36:10 INFO] .SET file for ACQ96 ready
[Ingest 19:36:11 INFO] Starting acquisition
[Status 19:36:11 INFO] reading housekeeping
[Status 19:36:29 INFO] acquire complete
[Status 19:36:30 INFO] writing housekeeping
[Sequencer 19:36:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:36:30 INFO] incremented Z scene to 348 completed views
[Sequencer 19:36:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:36:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:36:30 INFO] incremented to [AERI set: name H349, 6 scans, 60 angle, D22500 command] set
[sigmove 19:36:30 INFO] Z348.SIG(18)
[sigmove 19:36:30 DEBUG] transformed Z348Ma.SPC -> Z348MA.SPC
[sigmove 19:36:30 DEBUG] transformed Z348Mb.SPC -> Z348MB.SPC
[sigmove 19:36:30 DEBUG] transformed Z348Mc.SPC -> Z348MC.SPC
[sigmove 19:36:30 DEBUG] transformed Z348Md.SPC -> Z348MD.SPC
[sigmove 19:36:30 DEBUG] transformed Z348Me.SPC -> Z348ME.SPC
[sigmove 19:36:30 DEBUG] transformed Z348Mf.SPC -> Z348MF.SPC
[Status 19:36:30 INFO] data for Z348 transferred to science data processing
[Tidy 19:36:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:36:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:36:30 INFO] resetting WatchDogTimer
[Status 19:36:30 INFO] Starting Set [AERI set: name H349, 6 scans, 60 angle, D22500 command]
[Ingest 19:36:30 INFO] Sending XML status message
[Status 19:36:30 INFO] Mirror angle: 60
[Mirror 19:36:31 INFO] rotating to position H
[Status 19:36:32 INFO] .SET file for ACQ96 ready
[Ingest 19:36:32 INFO] Starting acquisition
[Status 19:36:33 INFO] reading housekeeping
[Status 19:36:50 INFO] acquire complete
[Status 19:36:51 INFO] writing housekeeping
[Sequencer 19:36:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:36:51 INFO] incremented H scene to 349 completed views
[Sequencer 19:36:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:36:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:36:51 INFO] incremented to [AERI set: name A349, 6 scans, 120 angle, D28300 command] set
[sigmove 19:36:51 INFO] H349.SIG(18)
[sigmove 19:36:51 DEBUG] transformed H349Ma.SPC -> H349MA.SPC
[sigmove 19:36:51 DEBUG] transformed H349Mb.SPC -> H349MB.SPC
[sigmove 19:36:51 DEBUG] transformed H349Mc.SPC -> H349MC.SPC
[sigmove 19:36:51 DEBUG] transformed H349Md.SPC -> H349MD.SPC
[sigmove 19:36:51 DEBUG] transformed H349Me.SPC -> H349ME.SPC
[sigmove 19:36:51 DEBUG] transformed H349Mf.SPC -> H349MF.SPC
[Status 19:36:51 INFO] data for H349 transferred to science data processing
[Tidy 19:36:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:36:51 INFO] A347.FIN(19),H347.FIN(19),S347.FIN(19),T347.FIN(19),U347.FIN(19),V347.FIN(19),W347.FIN(19),X347.FIN(19),Y347.FIN(19),Z347.FIN(19),A348.FIN(19),H348.FIN(19),S348.FIN(19),T348.FIN(19),U348.FIN(19),V348.FIN(19),W348.FIN(19),X348.FIN(19),Y348.FIN(19),Z348.FIN(19)
[sigmove 19:36:51 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:36:51 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:36:57 DEBUG] done zipping
[WatchDog 19:36:58 INFO] resetting WatchDogTimer
[Status 19:36:58 INFO] Starting Set [AERI set: name A349, 6 scans, 120 angle, D28300 command]
[Ingest 19:36:58 INFO] Sending XML status message
[Status 19:36:58 INFO] Mirror angle: 120
[Mirror 19:36:59 INFO] rotating to position A
[Status 19:37:00 INFO] .SET file for ACQ96 ready
[Ingest 19:37:00 INFO] Starting acquisition
[Status 19:37:01 INFO] reading housekeeping
[Status 19:37:18 INFO] acquire complete
[Status 19:37:19 INFO] writing housekeeping
[Sequencer 19:37:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:37:19 INFO] incremented A scene to 349 completed views
[Sequencer 19:37:19 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:37:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:37:19 INFO] incremented to [AERI set: name S349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:37:19 INFO] A349.SIG(18)
[sigmove 19:37:19 DEBUG] transformed A349Ma.SPC -> A349MA.SPC
[sigmove 19:37:19 DEBUG] transformed A349Mb.SPC -> A349MB.SPC
[sigmove 19:37:19 DEBUG] transformed A349Mc.SPC -> A349MC.SPC
[sigmove 19:37:19 DEBUG] transformed A349Md.SPC -> A349MD.SPC
[sigmove 19:37:19 DEBUG] transformed A349Me.SPC -> A349ME.SPC
[sigmove 19:37:19 DEBUG] transformed A349Mf.SPC -> A349MF.SPC
[Status 19:37:19 INFO] data for A349 transferred to science data processing
[Tidy 19:37:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:37:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:37:19 INFO] resetting WatchDogTimer
[Status 19:37:20 INFO] Starting Set [AERI set: name S349, 6 scans, 0 angle, D16300 command]
[Ingest 19:37:20 INFO] Sending XML status message
[Status 19:37:20 INFO] Mirror angle: 0
[Mirror 19:37:20 INFO] rotating to position S
[Status 19:37:22 INFO] .SET file for ACQ96 ready
[Ingest 19:37:22 INFO] Starting acquisition
[Status 19:37:23 INFO] reading housekeeping
[Status 19:37:44 INFO] acquire complete
[Status 19:37:45 INFO] writing housekeeping
[Sequencer 19:37:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:37:45 INFO] incremented S scene to 349 completed views
[Sequencer 19:37:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:37:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:37:45 INFO] incremented to [AERI set: name T349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:37:45 INFO] S349.SIG(18)
[sigmove 19:37:45 DEBUG] transformed S349Ma.SPC -> S349MA.SPC
[sigmove 19:37:45 DEBUG] transformed S349Mb.SPC -> S349MB.SPC
[sigmove 19:37:45 DEBUG] transformed S349Mc.SPC -> S349MC.SPC
[sigmove 19:37:45 DEBUG] transformed S349Md.SPC -> S349MD.SPC
[sigmove 19:37:45 DEBUG] transformed S349Me.SPC -> S349ME.SPC
[sigmove 19:37:45 DEBUG] transformed S349Mf.SPC -> S349MF.SPC
[Status 19:37:45 INFO] data for S349 transferred to science data processing
[Tidy 19:37:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:37:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:37:45 INFO] resetting WatchDogTimer
[Status 19:37:46 INFO] Starting Set [AERI set: name T349, 6 scans, 0 angle, D16300 command]
[Ingest 19:37:46 INFO] Sending XML status message
[Status 19:37:46 INFO] Mirror angle: 0
[Mirror 19:37:46 INFO] rotating to position T
[Status 19:37:47 INFO] .SET file for ACQ96 ready
[Ingest 19:37:47 INFO] Starting acquisition
[Status 19:37:47 INFO] reading housekeeping
[Status 19:38:05 INFO] acquire complete
[Status 19:38:06 INFO] writing housekeeping
[Sequencer 19:38:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:38:06 INFO] incremented T scene to 349 completed views
[Sequencer 19:38:06 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:38:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:38:06 INFO] incremented to [AERI set: name U349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:38:06 INFO] T349.SIG(18)
[sigmove 19:38:06 DEBUG] transformed T349Ma.SPC -> T349MA.SPC
[sigmove 19:38:06 DEBUG] transformed T349Mb.SPC -> T349MB.SPC
[sigmove 19:38:06 DEBUG] transformed T349Mc.SPC -> T349MC.SPC
[sigmove 19:38:06 DEBUG] transformed T349Md.SPC -> T349MD.SPC
[sigmove 19:38:06 DEBUG] transformed T349Me.SPC -> T349ME.SPC
[sigmove 19:38:06 DEBUG] transformed T349Mf.SPC -> T349MF.SPC
[Status 19:38:06 INFO] data for T349 transferred to science data processing
[Tidy 19:38:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:38:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:38:06 INFO] resetting WatchDogTimer
[Status 19:38:07 INFO] Starting Set [AERI set: name U349, 6 scans, 0 angle, D16300 command]
[Ingest 19:38:07 INFO] Sending XML status message
[Status 19:38:07 INFO] Mirror angle: 0
[Mirror 19:38:07 INFO] rotating to position U
[Status 19:38:08 INFO] .SET file for ACQ96 ready
[Ingest 19:38:08 INFO] Starting acquisition
[Status 19:38:09 INFO] reading housekeeping
[Status 19:38:27 INFO] acquire complete
[Status 19:38:28 INFO] writing housekeeping
[Sequencer 19:38:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:38:28 INFO] incremented U scene to 349 completed views
[Sequencer 19:38:28 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:38:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:38:28 INFO] incremented to [AERI set: name V349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:38:28 INFO] U349.SIG(18)
[sigmove 19:38:28 DEBUG] transformed U349Ma.SPC -> U349MA.SPC
[sigmove 19:38:28 DEBUG] transformed U349Mb.SPC -> U349MB.SPC
[sigmove 19:38:28 DEBUG] transformed U349Mc.SPC -> U349MC.SPC
[sigmove 19:38:28 DEBUG] transformed U349Md.SPC -> U349MD.SPC
[sigmove 19:38:28 DEBUG] transformed U349Me.SPC -> U349ME.SPC
[sigmove 19:38:28 DEBUG] transformed U349Mf.SPC -> U349MF.SPC
[Status 19:38:28 INFO] data for U349 transferred to science data processing
[Tidy 19:38:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:38:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:38:28 INFO] resetting WatchDogTimer
[Status 19:38:28 INFO] Starting Set [AERI set: name V349, 6 scans, 0 angle, D16300 command]
[Ingest 19:38:28 INFO] Sending XML status message
[Status 19:38:28 INFO] Mirror angle: 0
[Mirror 19:38:29 INFO] rotating to position V
[Status 19:38:29 INFO] .SET file for ACQ96 ready
[Ingest 19:38:30 INFO] Starting acquisition
[Status 19:38:30 INFO] reading housekeeping
[Status 19:38:48 INFO] acquire complete
[Status 19:38:49 INFO] writing housekeeping
[Sequencer 19:38:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:38:49 INFO] incremented V scene to 349 completed views
[Sequencer 19:38:49 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:38:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:38:49 INFO] incremented to [AERI set: name W349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:38:49 INFO] V349.SIG(18)
[sigmove 19:38:49 DEBUG] transformed V349Ma.SPC -> V349MA.SPC
[sigmove 19:38:49 DEBUG] transformed V349Mb.SPC -> V349MB.SPC
[sigmove 19:38:49 DEBUG] transformed V349Mc.SPC -> V349MC.SPC
[sigmove 19:38:49 DEBUG] transformed V349Md.SPC -> V349MD.SPC
[sigmove 19:38:49 DEBUG] transformed V349Me.SPC -> V349ME.SPC
[sigmove 19:38:49 DEBUG] transformed V349Mf.SPC -> V349MF.SPC
[Status 19:38:49 INFO] data for V349 transferred to science data processing
[Tidy 19:38:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:38:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:38:49 INFO] resetting WatchDogTimer
[Status 19:38:50 INFO] Starting Set [AERI set: name W349, 6 scans, 0 angle, D16300 command]
[Ingest 19:38:50 INFO] Sending XML status message
[Status 19:38:50 INFO] Mirror angle: 0
[Mirror 19:38:50 INFO] rotating to position W
[Status 19:38:50 INFO] .SET file for ACQ96 ready
[Ingest 19:38:51 INFO] Starting acquisition
[Status 19:38:51 INFO] reading housekeeping
[Status 19:39:09 INFO] acquire complete
[Status 19:39:10 INFO] writing housekeeping
[Sequencer 19:39:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:39:10 INFO] incremented W scene to 349 completed views
[Sequencer 19:39:10 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:39:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:39:10 INFO] incremented to [AERI set: name X349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:39:10 INFO] W349.SIG(18)
[sigmove 19:39:10 DEBUG] transformed W349Ma.SPC -> W349MA.SPC
[sigmove 19:39:10 DEBUG] transformed W349Mb.SPC -> W349MB.SPC
[sigmove 19:39:10 DEBUG] transformed W349Mc.SPC -> W349MC.SPC
[sigmove 19:39:10 DEBUG] transformed W349Md.SPC -> W349MD.SPC
[sigmove 19:39:10 DEBUG] transformed W349Me.SPC -> W349ME.SPC
[sigmove 19:39:10 DEBUG] transformed W349Mf.SPC -> W349MF.SPC
[Status 19:39:10 INFO] data for W349 transferred to science data processing
[Tidy 19:39:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:39:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:39:10 INFO] resetting WatchDogTimer
[Status 19:39:11 INFO] Starting Set [AERI set: name X349, 6 scans, 0 angle, D16300 command]
[Ingest 19:39:11 INFO] Sending XML status message
[Status 19:39:11 INFO] Mirror angle: 0
[Mirror 19:39:11 INFO] rotating to position X
[Status 19:39:12 INFO] .SET file for ACQ96 ready
[Ingest 19:39:12 INFO] Starting acquisition
[Status 19:39:13 INFO] reading housekeeping
[Status 19:39:31 INFO] acquire complete
[Status 19:39:32 INFO] writing housekeeping
[Sequencer 19:39:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:39:32 INFO] incremented X scene to 349 completed views
[Sequencer 19:39:32 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:39:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:39:32 INFO] incremented to [AERI set: name Y349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:39:32 INFO] X349.SIG(18)
[sigmove 19:39:32 DEBUG] transformed X349Ma.SPC -> X349MA.SPC
[sigmove 19:39:32 DEBUG] transformed X349Mb.SPC -> X349MB.SPC
[sigmove 19:39:32 DEBUG] transformed X349Mc.SPC -> X349MC.SPC
[sigmove 19:39:32 DEBUG] transformed X349Md.SPC -> X349MD.SPC
[sigmove 19:39:32 DEBUG] transformed X349Me.SPC -> X349ME.SPC
[sigmove 19:39:32 DEBUG] transformed X349Mf.SPC -> X349MF.SPC
[Status 19:39:32 INFO] data for X349 transferred to science data processing
[Tidy 19:39:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:39:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:39:32 INFO] resetting WatchDogTimer
[Status 19:39:32 INFO] Starting Set [AERI set: name Y349, 6 scans, 0 angle, D16300 command]
[Ingest 19:39:32 INFO] Sending XML status message
[Status 19:39:32 INFO] Mirror angle: 0
[Mirror 19:39:33 INFO] rotating to position Y
[Status 19:39:33 INFO] .SET file for ACQ96 ready
[Ingest 19:39:33 INFO] Starting acquisition
[Status 19:39:34 INFO] reading housekeeping
[Status 19:39:52 INFO] acquire complete
[Status 19:39:53 INFO] writing housekeeping
[Sequencer 19:39:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:39:53 INFO] incremented Y scene to 349 completed views
[Sequencer 19:39:53 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:39:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:39:53 INFO] incremented to [AERI set: name Z349, 6 scans, 0 angle, D16300 command] set
[sigmove 19:39:53 INFO] Y349.SIG(18)
[sigmove 19:39:53 DEBUG] transformed Y349Ma.SPC -> Y349MA.SPC
[sigmove 19:39:53 DEBUG] transformed Y349Mb.SPC -> Y349MB.SPC
[sigmove 19:39:53 DEBUG] transformed Y349Mc.SPC -> Y349MC.SPC
[sigmove 19:39:53 DEBUG] transformed Y349Md.SPC -> Y349MD.SPC
[sigmove 19:39:53 DEBUG] transformed Y349Me.SPC -> Y349ME.SPC
[sigmove 19:39:53 DEBUG] transformed Y349Mf.SPC -> Y349MF.SPC
[Status 19:39:53 INFO] data for Y349 transferred to science data processing
[Tidy 19:39:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:39:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:39:53 INFO] resetting WatchDogTimer
[Status 19:39:53 INFO] Starting Set [AERI set: name Z349, 6 scans, 0 angle, D16300 command]
[Ingest 19:39:53 INFO] Sending XML status message
[Status 19:39:53 INFO] Mirror angle: 0
[Mirror 19:39:54 INFO] rotating to position Z
[Status 19:39:54 INFO] .SET file for ACQ96 ready
[Ingest 19:39:55 INFO] Starting acquisition
[Status 19:39:55 INFO] reading housekeeping
[Status 19:40:13 INFO] acquire complete
[Status 19:40:14 INFO] writing housekeeping
[Sequencer 19:40:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:40:14 INFO] incremented Z scene to 349 completed views
[Sequencer 19:40:14 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:40:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:40:14 INFO] incremented to [AERI set: name A350, 6 scans, 120 angle, D28300 command] set
[sigmove 19:40:14 INFO] Z349.SIG(18)
[sigmove 19:40:14 DEBUG] transformed Z349Ma.SPC -> Z349MA.SPC
[sigmove 19:40:14 DEBUG] transformed Z349Mb.SPC -> Z349MB.SPC
[sigmove 19:40:14 DEBUG] transformed Z349Mc.SPC -> Z349MC.SPC
[sigmove 19:40:14 DEBUG] transformed Z349Md.SPC -> Z349MD.SPC
[sigmove 19:40:14 DEBUG] transformed Z349Me.SPC -> Z349ME.SPC
[sigmove 19:40:14 DEBUG] transformed Z349Mf.SPC -> Z349MF.SPC
[Status 19:40:14 INFO] data for Z349 transferred to science data processing
[Tidy 19:40:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:40:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:40:14 INFO] resetting WatchDogTimer
[Status 19:40:15 INFO] Starting Set [AERI set: name A350, 6 scans, 120 angle, D28300 command]
[Ingest 19:40:15 INFO] Sending XML status message
[Status 19:40:15 INFO] Mirror angle: 120
[Mirror 19:40:15 INFO] rotating to position A
[Status 19:40:17 INFO] .SET file for ACQ96 ready
[Ingest 19:40:17 INFO] Starting acquisition
[Status 19:40:18 INFO] reading housekeeping
[Status 19:40:36 INFO] acquire complete
[Status 19:40:37 INFO] writing housekeeping
[Sequencer 19:40:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:40:37 INFO] incremented A scene to 350 completed views
[Sequencer 19:40:37 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:40:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:40:37 INFO] incremented to [AERI set: name H350, 6 scans, 60 angle, D22500 command] set
[sigmove 19:40:37 INFO] A350.SIG(18)
[sigmove 19:40:37 DEBUG] transformed A350Ma.SPC -> A350MA.SPC
[sigmove 19:40:37 DEBUG] transformed A350Mb.SPC -> A350MB.SPC
[sigmove 19:40:37 DEBUG] transformed A350Mc.SPC -> A350MC.SPC
[sigmove 19:40:37 DEBUG] transformed A350Md.SPC -> A350MD.SPC
[sigmove 19:40:37 DEBUG] transformed A350Me.SPC -> A350ME.SPC
[sigmove 19:40:37 DEBUG] transformed A350Mf.SPC -> A350MF.SPC
[Status 19:40:37 INFO] data for A350 transferred to science data processing
[Tidy 19:40:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:40:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:40:37 INFO] resetting WatchDogTimer
[Status 19:40:37 INFO] Starting Set [AERI set: name H350, 6 scans, 60 angle, D22500 command]
[Ingest 19:40:37 INFO] Sending XML status message
[Status 19:40:37 INFO] Mirror angle: 60
[Mirror 19:40:38 INFO] rotating to position H
[Status 19:40:39 INFO] .SET file for ACQ96 ready
[Ingest 19:40:39 INFO] Starting acquisition
[Status 19:40:40 INFO] reading housekeeping
[Status 19:40:57 INFO] acquire complete
[Status 19:40:58 INFO] writing housekeeping
[Sequencer 19:40:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:40:58 INFO] incremented H scene to 350 completed views
[Sequencer 19:40:58 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:40:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:40:58 INFO] incremented to [AERI set: name S350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:40:58 INFO] H350.SIG(18)
[sigmove 19:40:58 DEBUG] transformed H350Ma.SPC -> H350MA.SPC
[sigmove 19:40:58 DEBUG] transformed H350Mb.SPC -> H350MB.SPC
[sigmove 19:40:58 DEBUG] transformed H350Mc.SPC -> H350MC.SPC
[sigmove 19:40:58 DEBUG] transformed H350Md.SPC -> H350MD.SPC
[sigmove 19:40:58 DEBUG] transformed H350Me.SPC -> H350ME.SPC
[sigmove 19:40:58 DEBUG] transformed H350Mf.SPC -> H350MF.SPC
[Status 19:40:58 INFO] data for H350 transferred to science data processing
[Tidy 19:40:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:40:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:40:58 INFO] resetting WatchDogTimer
[Status 19:40:58 INFO] Starting Set [AERI set: name S350, 6 scans, 0 angle, D16300 command]
[Ingest 19:40:58 INFO] Sending XML status message
[Status 19:40:58 INFO] Mirror angle: 0
[Mirror 19:40:59 INFO] rotating to position S
[Status 19:41:00 INFO] .SET file for ACQ96 ready
[Ingest 19:41:00 INFO] Starting acquisition
[Status 19:41:01 INFO] reading housekeeping
[Status 19:41:18 INFO] acquire complete
[Status 19:41:19 INFO] writing housekeeping
[Sequencer 19:41:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:41:19 INFO] incremented S scene to 350 completed views
[Sequencer 19:41:19 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:41:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:41:19 INFO] incremented to [AERI set: name T350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:41:19 INFO] S350.SIG(18)
[sigmove 19:41:19 DEBUG] transformed S350Ma.SPC -> S350MA.SPC
[sigmove 19:41:19 DEBUG] transformed S350Mb.SPC -> S350MB.SPC
[sigmove 19:41:19 DEBUG] transformed S350Mc.SPC -> S350MC.SPC
[sigmove 19:41:19 DEBUG] transformed S350Md.SPC -> S350MD.SPC
[sigmove 19:41:19 DEBUG] transformed S350Me.SPC -> S350ME.SPC
[sigmove 19:41:19 DEBUG] transformed S350Mf.SPC -> S350MF.SPC
[Status 19:41:19 INFO] data for S350 transferred to science data processing
[Tidy 19:41:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:41:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:41:19 INFO] resetting WatchDogTimer
[Status 19:41:20 INFO] Starting Set [AERI set: name T350, 6 scans, 0 angle, D16300 command]
[Ingest 19:41:20 INFO] Sending XML status message
[Status 19:41:20 INFO] Mirror angle: 0
[Mirror 19:41:20 INFO] rotating to position T
[Status 19:41:21 INFO] .SET file for ACQ96 ready
[Ingest 19:41:21 INFO] Starting acquisition
[Status 19:41:22 INFO] reading housekeeping
[Status 19:41:40 INFO] acquire complete
[Status 19:41:41 INFO] writing housekeeping
[Sequencer 19:41:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:41:41 INFO] incremented T scene to 350 completed views
[Sequencer 19:41:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:41:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:41:41 INFO] incremented to [AERI set: name U350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:41:41 INFO] T350.SIG(18)
[sigmove 19:41:41 DEBUG] transformed T350Ma.SPC -> T350MA.SPC
[sigmove 19:41:41 DEBUG] transformed T350Mb.SPC -> T350MB.SPC
[sigmove 19:41:41 DEBUG] transformed T350Mc.SPC -> T350MC.SPC
[sigmove 19:41:41 DEBUG] transformed T350Md.SPC -> T350MD.SPC
[sigmove 19:41:41 DEBUG] transformed T350Me.SPC -> T350ME.SPC
[sigmove 19:41:41 DEBUG] transformed T350Mf.SPC -> T350MF.SPC
[Status 19:41:41 INFO] data for T350 transferred to science data processing
[Tidy 19:41:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:41:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:41:41 INFO] resetting WatchDogTimer
[Status 19:41:41 INFO] Starting Set [AERI set: name U350, 6 scans, 0 angle, D16300 command]
[Ingest 19:41:41 INFO] Sending XML status message
[Status 19:41:41 INFO] Mirror angle: 0
[Mirror 19:41:42 INFO] rotating to position U
[Status 19:41:42 INFO] .SET file for ACQ96 ready
[Ingest 19:41:42 INFO] Starting acquisition
[Status 19:41:43 INFO] reading housekeeping
[Status 19:42:01 INFO] acquire complete
[Status 19:42:02 INFO] writing housekeeping
[Sequencer 19:42:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:42:02 INFO] incremented U scene to 350 completed views
[Sequencer 19:42:02 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:42:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:42:02 INFO] incremented to [AERI set: name V350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:42:02 INFO] U350.SIG(18)
[sigmove 19:42:02 DEBUG] transformed U350Ma.SPC -> U350MA.SPC
[sigmove 19:42:02 DEBUG] transformed U350Mb.SPC -> U350MB.SPC
[sigmove 19:42:02 DEBUG] transformed U350Mc.SPC -> U350MC.SPC
[sigmove 19:42:02 DEBUG] transformed U350Md.SPC -> U350MD.SPC
[sigmove 19:42:02 DEBUG] transformed U350Me.SPC -> U350ME.SPC
[sigmove 19:42:02 DEBUG] transformed U350Mf.SPC -> U350MF.SPC
[Status 19:42:02 INFO] data for U350 transferred to science data processing
[Tidy 19:42:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:42:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:42:02 INFO] resetting WatchDogTimer
[Status 19:42:02 INFO] Starting Set [AERI set: name V350, 6 scans, 0 angle, D16300 command]
[Ingest 19:42:02 INFO] Sending XML status message
[Status 19:42:02 INFO] Mirror angle: 0
[Mirror 19:42:03 INFO] rotating to position V
[Status 19:42:03 INFO] .SET file for ACQ96 ready
[Ingest 19:42:04 INFO] Starting acquisition
[Status 19:42:04 INFO] reading housekeeping
[Status 19:42:22 INFO] acquire complete
[Status 19:42:23 INFO] writing housekeeping
[Sequencer 19:42:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:42:23 INFO] incremented V scene to 350 completed views
[Sequencer 19:42:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:42:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:42:23 INFO] incremented to [AERI set: name W350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:42:23 INFO] V350.SIG(18)
[sigmove 19:42:23 DEBUG] transformed V350Ma.SPC -> V350MA.SPC
[sigmove 19:42:23 DEBUG] transformed V350Mb.SPC -> V350MB.SPC
[sigmove 19:42:23 DEBUG] transformed V350Mc.SPC -> V350MC.SPC
[sigmove 19:42:23 DEBUG] transformed V350Md.SPC -> V350MD.SPC
[sigmove 19:42:23 DEBUG] transformed V350Me.SPC -> V350ME.SPC
[sigmove 19:42:23 DEBUG] transformed V350Mf.SPC -> V350MF.SPC
[Status 19:42:23 INFO] data for V350 transferred to science data processing
[Tidy 19:42:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:42:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:42:23 INFO] resetting WatchDogTimer
[Status 19:42:24 INFO] Starting Set [AERI set: name W350, 6 scans, 0 angle, D16300 command]
[Ingest 19:42:24 INFO] Sending XML status message
[Status 19:42:24 INFO] Mirror angle: 0
[Mirror 19:42:24 INFO] rotating to position W
[Status 19:42:25 INFO] .SET file for ACQ96 ready
[Ingest 19:42:25 INFO] Starting acquisition
[Status 19:42:26 INFO] reading housekeeping
[Status 19:42:43 INFO] acquire complete
[Status 19:42:45 INFO] writing housekeeping
[Sequencer 19:42:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:42:45 INFO] incremented W scene to 350 completed views
[Sequencer 19:42:45 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:42:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:42:45 INFO] incremented to [AERI set: name X350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:42:45 INFO] W350.SIG(18)
[sigmove 19:42:45 DEBUG] transformed W350Ma.SPC -> W350MA.SPC
[sigmove 19:42:45 DEBUG] transformed W350Mb.SPC -> W350MB.SPC
[sigmove 19:42:45 DEBUG] transformed W350Mc.SPC -> W350MC.SPC
[sigmove 19:42:45 DEBUG] transformed W350Md.SPC -> W350MD.SPC
[sigmove 19:42:45 DEBUG] transformed W350Me.SPC -> W350ME.SPC
[sigmove 19:42:45 DEBUG] transformed W350Mf.SPC -> W350MF.SPC
[Status 19:42:45 INFO] data for W350 transferred to science data processing
[Tidy 19:42:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:42:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:42:45 INFO] resetting WatchDogTimer
[Status 19:42:45 INFO] Starting Set [AERI set: name X350, 6 scans, 0 angle, D16300 command]
[Ingest 19:42:45 INFO] Sending XML status message
[Status 19:42:45 INFO] Mirror angle: 0
[Mirror 19:42:46 INFO] rotating to position X
[Status 19:42:46 INFO] .SET file for ACQ96 ready
[Ingest 19:42:46 INFO] Starting acquisition
[Status 19:42:47 INFO] reading housekeeping
[Status 19:43:05 INFO] acquire complete
[Status 19:43:06 INFO] writing housekeeping
[Sequencer 19:43:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:43:06 INFO] incremented X scene to 350 completed views
[Sequencer 19:43:06 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:43:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:43:06 INFO] incremented to [AERI set: name Y350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:43:06 INFO] X350.SIG(18)
[sigmove 19:43:06 DEBUG] transformed X350Ma.SPC -> X350MA.SPC
[sigmove 19:43:06 DEBUG] transformed X350Mb.SPC -> X350MB.SPC
[sigmove 19:43:06 DEBUG] transformed X350Mc.SPC -> X350MC.SPC
[sigmove 19:43:06 DEBUG] transformed X350Md.SPC -> X350MD.SPC
[sigmove 19:43:06 DEBUG] transformed X350Me.SPC -> X350ME.SPC
[sigmove 19:43:06 DEBUG] transformed X350Mf.SPC -> X350MF.SPC
[Status 19:43:06 INFO] data for X350 transferred to science data processing
[Tidy 19:43:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:43:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:43:06 INFO] resetting WatchDogTimer
[Status 19:43:06 INFO] Starting Set [AERI set: name Y350, 6 scans, 0 angle, D16300 command]
[Ingest 19:43:06 INFO] Sending XML status message
[Status 19:43:06 INFO] Mirror angle: 0
[Mirror 19:43:07 INFO] rotating to position Y
[Status 19:43:07 INFO] .SET file for ACQ96 ready
[Ingest 19:43:08 INFO] Starting acquisition
[Status 19:43:08 INFO] reading housekeeping
[Status 19:43:26 INFO] acquire complete
[Status 19:43:27 INFO] writing housekeeping
[Sequencer 19:43:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:43:27 INFO] incremented Y scene to 350 completed views
[Sequencer 19:43:27 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:43:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:43:27 INFO] incremented to [AERI set: name Z350, 6 scans, 0 angle, D16300 command] set
[sigmove 19:43:27 INFO] Y350.SIG(18)
[sigmove 19:43:27 DEBUG] transformed Y350Ma.SPC -> Y350MA.SPC
[sigmove 19:43:27 DEBUG] transformed Y350Mb.SPC -> Y350MB.SPC
[sigmove 19:43:27 DEBUG] transformed Y350Mc.SPC -> Y350MC.SPC
[sigmove 19:43:27 DEBUG] transformed Y350Md.SPC -> Y350MD.SPC
[sigmove 19:43:27 DEBUG] transformed Y350Me.SPC -> Y350ME.SPC
[sigmove 19:43:27 DEBUG] transformed Y350Mf.SPC -> Y350MF.SPC
[Status 19:43:27 INFO] data for Y350 transferred to science data processing
[Tidy 19:43:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:43:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:43:27 INFO] resetting WatchDogTimer
[Status 19:43:28 INFO] Starting Set [AERI set: name Z350, 6 scans, 0 angle, D16300 command]
[Ingest 19:43:28 INFO] Sending XML status message
[Status 19:43:28 INFO] Mirror angle: 0
[Mirror 19:43:28 INFO] rotating to position Z
[Status 19:43:29 INFO] .SET file for ACQ96 ready
[Ingest 19:43:29 INFO] Starting acquisition
[Status 19:43:30 INFO] reading housekeeping
[Status 19:43:47 INFO] acquire complete
[Status 19:43:49 INFO] writing housekeeping
[Sequencer 19:43:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:43:49 INFO] incremented Z scene to 350 completed views
[Sequencer 19:43:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:43:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:43:49 INFO] incremented to [AERI set: name H351, 6 scans, 60 angle, D22500 command] set
[sigmove 19:43:49 INFO] Z350.SIG(18)
[sigmove 19:43:49 DEBUG] transformed Z350Ma.SPC -> Z350MA.SPC
[sigmove 19:43:49 DEBUG] transformed Z350Mb.SPC -> Z350MB.SPC
[sigmove 19:43:49 DEBUG] transformed Z350Mc.SPC -> Z350MC.SPC
[sigmove 19:43:49 DEBUG] transformed Z350Md.SPC -> Z350MD.SPC
[sigmove 19:43:49 DEBUG] transformed Z350Me.SPC -> Z350ME.SPC
[sigmove 19:43:49 DEBUG] transformed Z350Mf.SPC -> Z350MF.SPC
[Status 19:43:49 INFO] data for Z350 transferred to science data processing
[Tidy 19:43:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:43:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:43:49 INFO] resetting WatchDogTimer
[Status 19:43:49 INFO] Starting Set [AERI set: name H351, 6 scans, 60 angle, D22500 command]
[Ingest 19:43:49 INFO] Sending XML status message
[Status 19:43:49 INFO] Mirror angle: 60
[Mirror 19:43:49 INFO] rotating to position H
[Status 19:43:51 INFO] .SET file for ACQ96 ready
[Ingest 19:43:51 INFO] Starting acquisition
[Status 19:43:51 INFO] reading housekeeping
[Status 19:44:09 INFO] acquire complete
[Status 19:44:10 INFO] writing housekeeping
[Sequencer 19:44:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:44:10 INFO] incremented H scene to 351 completed views
[Sequencer 19:44:10 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:44:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:44:10 INFO] incremented to [AERI set: name A351, 6 scans, 120 angle, D28300 command] set
[sigmove 19:44:10 INFO] H351.SIG(18)
[sigmove 19:44:10 DEBUG] transformed H351Ma.SPC -> H351MA.SPC
[sigmove 19:44:10 DEBUG] transformed H351Mb.SPC -> H351MB.SPC
[sigmove 19:44:10 DEBUG] transformed H351Mc.SPC -> H351MC.SPC
[sigmove 19:44:10 DEBUG] transformed H351Md.SPC -> H351MD.SPC
[sigmove 19:44:10 DEBUG] transformed H351Me.SPC -> H351ME.SPC
[sigmove 19:44:10 DEBUG] transformed H351Mf.SPC -> H351MF.SPC
[Status 19:44:10 INFO] data for H351 transferred to science data processing
[Tidy 19:44:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:44:10 INFO] A349.FIN(19),H349.FIN(19),S349.FIN(19),T349.FIN(19),U349.FIN(19),V349.FIN(19),W349.FIN(19),X349.FIN(19),Y349.FIN(19),Z349.FIN(19),A350.FIN(19),H350.FIN(19),S350.FIN(19),T350.FIN(19),U350.FIN(19),V350.FIN(19),W350.FIN(19),X350.FIN(19),Y350.FIN(19),Z350.FIN(19)
[sigmove 19:44:10 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:44:10 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:44:16 DEBUG] done zipping
[WatchDog 19:44:16 INFO] resetting WatchDogTimer
[Status 19:44:17 INFO] Starting Set [AERI set: name A351, 6 scans, 120 angle, D28300 command]
[Ingest 19:44:17 INFO] Sending XML status message
[Status 19:44:17 INFO] Mirror angle: 120
[Mirror 19:44:17 INFO] rotating to position A
[Status 19:44:18 INFO] .SET file for ACQ96 ready
[Ingest 19:44:19 INFO] Starting acquisition
[Status 19:44:19 INFO] reading housekeeping
[Status 19:44:37 INFO] acquire complete
[Status 19:44:38 INFO] writing housekeeping
[Sequencer 19:44:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:44:38 INFO] incremented A scene to 351 completed views
[Sequencer 19:44:38 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:44:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:44:38 INFO] incremented to [AERI set: name S351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:44:38 INFO] A351.SIG(18)
[sigmove 19:44:38 DEBUG] transformed A351Ma.SPC -> A351MA.SPC
[sigmove 19:44:38 DEBUG] transformed A351Mb.SPC -> A351MB.SPC
[sigmove 19:44:38 DEBUG] transformed A351Mc.SPC -> A351MC.SPC
[sigmove 19:44:38 DEBUG] transformed A351Md.SPC -> A351MD.SPC
[sigmove 19:44:38 DEBUG] transformed A351Me.SPC -> A351ME.SPC
[sigmove 19:44:38 DEBUG] transformed A351Mf.SPC -> A351MF.SPC
[Status 19:44:38 INFO] data for A351 transferred to science data processing
[Tidy 19:44:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:44:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:44:38 INFO] resetting WatchDogTimer
[Status 19:44:38 INFO] Starting Set [AERI set: name S351, 6 scans, 0 angle, D16300 command]
[Ingest 19:44:38 INFO] Sending XML status message
[Status 19:44:38 INFO] Mirror angle: 0
[Mirror 19:44:39 INFO] rotating to position S
[Status 19:44:40 INFO] .SET file for ACQ96 ready
[Ingest 19:44:41 INFO] Starting acquisition
[Status 19:44:41 INFO] reading housekeeping
[Status 19:44:59 INFO] acquire complete
[Status 19:45:00 INFO] writing housekeeping
[Sequencer 19:45:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:45:00 INFO] incremented S scene to 351 completed views
[Sequencer 19:45:00 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:45:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:45:00 INFO] incremented to [AERI set: name T351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:45:00 INFO] S351.SIG(18)
[sigmove 19:45:00 DEBUG] transformed S351Ma.SPC -> S351MA.SPC
[sigmove 19:45:00 DEBUG] transformed S351Mb.SPC -> S351MB.SPC
[sigmove 19:45:00 DEBUG] transformed S351Mc.SPC -> S351MC.SPC
[sigmove 19:45:00 DEBUG] transformed S351Md.SPC -> S351MD.SPC
[sigmove 19:45:00 DEBUG] transformed S351Me.SPC -> S351ME.SPC
[sigmove 19:45:00 DEBUG] transformed S351Mf.SPC -> S351MF.SPC
[Status 19:45:00 INFO] data for S351 transferred to science data processing
[Tidy 19:45:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:45:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:45:00 INFO] resetting WatchDogTimer
[Status 19:45:01 INFO] Starting Set [AERI set: name T351, 6 scans, 0 angle, D16300 command]
[Ingest 19:45:01 INFO] Sending XML status message
[Status 19:45:01 INFO] Mirror angle: 0
[Mirror 19:45:01 INFO] rotating to position T
[Status 19:45:02 INFO] .SET file for ACQ96 ready
[Ingest 19:45:02 INFO] Starting acquisition
[Status 19:45:03 INFO] reading housekeeping
[Status 19:45:20 INFO] acquire complete
[Status 19:45:22 INFO] writing housekeeping
[Sequencer 19:45:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:45:22 INFO] incremented T scene to 351 completed views
[Sequencer 19:45:22 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:45:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:45:22 INFO] incremented to [AERI set: name U351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:45:22 INFO] T351.SIG(18)
[sigmove 19:45:22 DEBUG] transformed T351Ma.SPC -> T351MA.SPC
[sigmove 19:45:22 DEBUG] transformed T351Mb.SPC -> T351MB.SPC
[sigmove 19:45:22 DEBUG] transformed T351Mc.SPC -> T351MC.SPC
[sigmove 19:45:22 DEBUG] transformed T351Md.SPC -> T351MD.SPC
[sigmove 19:45:22 DEBUG] transformed T351Me.SPC -> T351ME.SPC
[sigmove 19:45:22 DEBUG] transformed T351Mf.SPC -> T351MF.SPC
[Status 19:45:22 INFO] data for T351 transferred to science data processing
[Tidy 19:45:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:45:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:45:22 INFO] resetting WatchDogTimer
[Status 19:45:22 INFO] Starting Set [AERI set: name U351, 6 scans, 0 angle, D16300 command]
[Ingest 19:45:22 INFO] Sending XML status message
[Status 19:45:22 INFO] Mirror angle: 0
[Mirror 19:45:22 INFO] rotating to position U
[Status 19:45:23 INFO] .SET file for ACQ96 ready
[Ingest 19:45:23 INFO] Starting acquisition
[Status 19:45:24 INFO] reading housekeeping
[Status 19:45:42 INFO] acquire complete
[Status 19:45:43 INFO] writing housekeeping
[Sequencer 19:45:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:45:43 INFO] incremented U scene to 351 completed views
[Sequencer 19:45:43 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:45:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:45:43 INFO] incremented to [AERI set: name V351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:45:43 INFO] U351.SIG(18)
[sigmove 19:45:43 DEBUG] transformed U351Ma.SPC -> U351MA.SPC
[sigmove 19:45:43 DEBUG] transformed U351Mb.SPC -> U351MB.SPC
[sigmove 19:45:43 DEBUG] transformed U351Mc.SPC -> U351MC.SPC
[sigmove 19:45:43 DEBUG] transformed U351Md.SPC -> U351MD.SPC
[sigmove 19:45:43 DEBUG] transformed U351Me.SPC -> U351ME.SPC
[sigmove 19:45:43 DEBUG] transformed U351Mf.SPC -> U351MF.SPC
[Status 19:45:43 INFO] data for U351 transferred to science data processing
[Tidy 19:45:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:45:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:45:43 INFO] resetting WatchDogTimer
[Status 19:45:43 INFO] Starting Set [AERI set: name V351, 6 scans, 0 angle, D16300 command]
[Ingest 19:45:43 INFO] Sending XML status message
[Status 19:45:43 INFO] Mirror angle: 0
[Mirror 19:45:44 INFO] rotating to position V
[Status 19:45:44 INFO] .SET file for ACQ96 ready
[Ingest 19:45:45 INFO] Starting acquisition
[Status 19:45:45 INFO] reading housekeeping
[Status 19:46:03 INFO] acquire complete
[Status 19:46:04 INFO] writing housekeeping
[Sequencer 19:46:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:46:04 INFO] incremented V scene to 351 completed views
[Sequencer 19:46:04 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:46:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:46:04 INFO] incremented to [AERI set: name W351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:46:04 INFO] V351.SIG(18)
[sigmove 19:46:04 DEBUG] transformed V351Ma.SPC -> V351MA.SPC
[sigmove 19:46:04 DEBUG] transformed V351Mb.SPC -> V351MB.SPC
[sigmove 19:46:04 DEBUG] transformed V351Mc.SPC -> V351MC.SPC
[sigmove 19:46:04 DEBUG] transformed V351Md.SPC -> V351MD.SPC
[sigmove 19:46:04 DEBUG] transformed V351Me.SPC -> V351ME.SPC
[sigmove 19:46:04 DEBUG] transformed V351Mf.SPC -> V351MF.SPC
[Status 19:46:04 INFO] data for V351 transferred to science data processing
[Tidy 19:46:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:46:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:46:04 INFO] resetting WatchDogTimer
[Status 19:46:05 INFO] Starting Set [AERI set: name W351, 6 scans, 0 angle, D16300 command]
[Ingest 19:46:05 INFO] Sending XML status message
[Status 19:46:05 INFO] Mirror angle: 0
[Mirror 19:46:05 INFO] rotating to position W
[Status 19:46:06 INFO] .SET file for ACQ96 ready
[Ingest 19:46:06 INFO] Starting acquisition
[Status 19:46:07 INFO] reading housekeeping
[Status 19:46:24 INFO] acquire complete
[Status 19:46:26 INFO] writing housekeeping
[Sequencer 19:46:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:46:26 INFO] incremented W scene to 351 completed views
[Sequencer 19:46:26 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:46:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:46:26 INFO] incremented to [AERI set: name X351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:46:26 INFO] W351.SIG(18)
[sigmove 19:46:26 DEBUG] transformed W351Ma.SPC -> W351MA.SPC
[sigmove 19:46:26 DEBUG] transformed W351Mb.SPC -> W351MB.SPC
[sigmove 19:46:26 DEBUG] transformed W351Mc.SPC -> W351MC.SPC
[sigmove 19:46:26 DEBUG] transformed W351Md.SPC -> W351MD.SPC
[sigmove 19:46:26 DEBUG] transformed W351Me.SPC -> W351ME.SPC
[sigmove 19:46:26 DEBUG] transformed W351Mf.SPC -> W351MF.SPC
[Status 19:46:26 INFO] data for W351 transferred to science data processing
[Tidy 19:46:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:46:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:46:26 INFO] resetting WatchDogTimer
[Status 19:46:26 INFO] Starting Set [AERI set: name X351, 6 scans, 0 angle, D16300 command]
[Ingest 19:46:26 INFO] Sending XML status message
[Status 19:46:26 INFO] Mirror angle: 0
[Mirror 19:46:26 INFO] rotating to position X
[Status 19:46:27 INFO] .SET file for ACQ96 ready
[Ingest 19:46:27 INFO] Starting acquisition
[Status 19:46:28 INFO] reading housekeeping
[Status 19:46:46 INFO] acquire complete
[Status 19:46:47 INFO] writing housekeeping
[Sequencer 19:46:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:46:47 INFO] incremented X scene to 351 completed views
[Sequencer 19:46:47 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:46:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:46:47 INFO] incremented to [AERI set: name Y351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:46:47 INFO] X351.SIG(18)
[sigmove 19:46:47 DEBUG] transformed X351Ma.SPC -> X351MA.SPC
[sigmove 19:46:47 DEBUG] transformed X351Mb.SPC -> X351MB.SPC
[sigmove 19:46:47 DEBUG] transformed X351Mc.SPC -> X351MC.SPC
[sigmove 19:46:47 DEBUG] transformed X351Md.SPC -> X351MD.SPC
[sigmove 19:46:47 DEBUG] transformed X351Me.SPC -> X351ME.SPC
[sigmove 19:46:47 DEBUG] transformed X351Mf.SPC -> X351MF.SPC
[Status 19:46:47 INFO] data for X351 transferred to science data processing
[Tidy 19:46:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:46:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:46:47 INFO] resetting WatchDogTimer
[Status 19:46:47 INFO] Starting Set [AERI set: name Y351, 6 scans, 0 angle, D16300 command]
[Ingest 19:46:47 INFO] Sending XML status message
[Status 19:46:47 INFO] Mirror angle: 0
[Mirror 19:46:48 INFO] rotating to position Y
[Status 19:46:48 INFO] .SET file for ACQ96 ready
[Ingest 19:46:49 INFO] Starting acquisition
[Status 19:46:49 INFO] reading housekeeping
[Status 19:47:07 INFO] acquire complete
[Status 19:47:08 INFO] writing housekeeping
[Sequencer 19:47:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:47:08 INFO] incremented Y scene to 351 completed views
[Sequencer 19:47:08 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:47:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:47:08 INFO] incremented to [AERI set: name Z351, 6 scans, 0 angle, D16300 command] set
[sigmove 19:47:08 INFO] Y351.SIG(18)
[sigmove 19:47:08 DEBUG] transformed Y351Ma.SPC -> Y351MA.SPC
[sigmove 19:47:08 DEBUG] transformed Y351Mb.SPC -> Y351MB.SPC
[sigmove 19:47:08 DEBUG] transformed Y351Mc.SPC -> Y351MC.SPC
[sigmove 19:47:08 DEBUG] transformed Y351Md.SPC -> Y351MD.SPC
[sigmove 19:47:08 DEBUG] transformed Y351Me.SPC -> Y351ME.SPC
[sigmove 19:47:08 DEBUG] transformed Y351Mf.SPC -> Y351MF.SPC
[Status 19:47:08 INFO] data for Y351 transferred to science data processing
[Tidy 19:47:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:47:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:47:08 INFO] resetting WatchDogTimer
[Status 19:47:09 INFO] Starting Set [AERI set: name Z351, 6 scans, 0 angle, D16300 command]
[Ingest 19:47:09 INFO] Sending XML status message
[Status 19:47:09 INFO] Mirror angle: 0
[Mirror 19:47:09 INFO] rotating to position Z
[Status 19:47:10 INFO] .SET file for ACQ96 ready
[Ingest 19:47:10 INFO] Starting acquisition
[Status 19:47:11 INFO] reading housekeeping
[Status 19:47:28 INFO] acquire complete
[Status 19:47:29 INFO] writing housekeeping
[Sequencer 19:47:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:47:29 INFO] incremented Z scene to 351 completed views
[Sequencer 19:47:29 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:47:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:47:29 INFO] incremented to [AERI set: name A352, 6 scans, 120 angle, D28300 command] set
[sigmove 19:47:29 INFO] Z351.SIG(18)
[sigmove 19:47:29 DEBUG] transformed Z351Ma.SPC -> Z351MA.SPC
[sigmove 19:47:29 DEBUG] transformed Z351Mb.SPC -> Z351MB.SPC
[sigmove 19:47:29 DEBUG] transformed Z351Mc.SPC -> Z351MC.SPC
[sigmove 19:47:29 DEBUG] transformed Z351Md.SPC -> Z351MD.SPC
[sigmove 19:47:29 DEBUG] transformed Z351Me.SPC -> Z351ME.SPC
[sigmove 19:47:29 DEBUG] transformed Z351Mf.SPC -> Z351MF.SPC
[Status 19:47:29 INFO] data for Z351 transferred to science data processing
[Tidy 19:47:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:47:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:47:30 INFO] resetting WatchDogTimer
[Status 19:47:30 INFO] Starting Set [AERI set: name A352, 6 scans, 120 angle, D28300 command]
[Ingest 19:47:30 INFO] Sending XML status message
[Status 19:47:30 INFO] Mirror angle: 120
[Mirror 19:47:30 INFO] rotating to position A
[Status 19:47:32 INFO] .SET file for ACQ96 ready
[Ingest 19:47:32 INFO] Starting acquisition
[Status 19:47:33 INFO] reading housekeeping
[Status 19:47:51 INFO] acquire complete
[Status 19:47:52 INFO] writing housekeeping
[Sequencer 19:47:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:47:52 INFO] incremented A scene to 352 completed views
[Sequencer 19:47:52 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:47:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:47:52 INFO] incremented to [AERI set: name H352, 6 scans, 60 angle, D22500 command] set
[sigmove 19:47:52 INFO] A352.SIG(18)
[sigmove 19:47:52 DEBUG] transformed A352Ma.SPC -> A352MA.SPC
[sigmove 19:47:52 DEBUG] transformed A352Mb.SPC -> A352MB.SPC
[sigmove 19:47:52 DEBUG] transformed A352Mc.SPC -> A352MC.SPC
[sigmove 19:47:52 DEBUG] transformed A352Md.SPC -> A352MD.SPC
[sigmove 19:47:52 DEBUG] transformed A352Me.SPC -> A352ME.SPC
[sigmove 19:47:52 DEBUG] transformed A352Mf.SPC -> A352MF.SPC
[Status 19:47:52 INFO] data for A352 transferred to science data processing
[Tidy 19:47:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:47:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:47:52 INFO] resetting WatchDogTimer
[Status 19:47:52 INFO] Starting Set [AERI set: name H352, 6 scans, 60 angle, D22500 command]
[Ingest 19:47:52 INFO] Sending XML status message
[Status 19:47:52 INFO] Mirror angle: 60
[Mirror 19:47:53 INFO] rotating to position H
[Status 19:47:54 INFO] .SET file for ACQ96 ready
[Ingest 19:47:54 INFO] Starting acquisition
[Status 19:47:55 INFO] reading housekeeping
[Status 19:48:12 INFO] acquire complete
[Status 19:48:13 INFO] writing housekeeping
[Sequencer 19:48:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:48:13 INFO] incremented H scene to 352 completed views
[Sequencer 19:48:13 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:48:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:48:13 INFO] incremented to [AERI set: name S352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:48:13 INFO] H352.SIG(18)
[sigmove 19:48:13 DEBUG] transformed H352Ma.SPC -> H352MA.SPC
[sigmove 19:48:13 DEBUG] transformed H352Mb.SPC -> H352MB.SPC
[sigmove 19:48:13 DEBUG] transformed H352Mc.SPC -> H352MC.SPC
[sigmove 19:48:13 DEBUG] transformed H352Md.SPC -> H352MD.SPC
[sigmove 19:48:13 DEBUG] transformed H352Me.SPC -> H352ME.SPC
[sigmove 19:48:13 DEBUG] transformed H352Mf.SPC -> H352MF.SPC
[Status 19:48:13 INFO] data for H352 transferred to science data processing
[Tidy 19:48:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:48:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:48:13 INFO] resetting WatchDogTimer
[Status 19:48:14 INFO] Starting Set [AERI set: name S352, 6 scans, 0 angle, D16300 command]
[Ingest 19:48:14 INFO] Sending XML status message
[Status 19:48:14 INFO] Mirror angle: 0
[Mirror 19:48:14 INFO] rotating to position S
[Status 19:48:15 INFO] .SET file for ACQ96 ready
[Ingest 19:48:16 INFO] Starting acquisition
[Status 19:48:16 INFO] reading housekeeping
[Status 19:48:33 INFO] acquire complete
[Status 19:48:35 INFO] writing housekeeping
[Sequencer 19:48:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:48:35 INFO] incremented S scene to 352 completed views
[Sequencer 19:48:35 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:48:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:48:35 INFO] incremented to [AERI set: name T352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:48:35 INFO] S352.SIG(18)
[sigmove 19:48:35 DEBUG] transformed S352Ma.SPC -> S352MA.SPC
[sigmove 19:48:35 DEBUG] transformed S352Mb.SPC -> S352MB.SPC
[sigmove 19:48:35 DEBUG] transformed S352Mc.SPC -> S352MC.SPC
[sigmove 19:48:35 DEBUG] transformed S352Md.SPC -> S352MD.SPC
[sigmove 19:48:35 DEBUG] transformed S352Me.SPC -> S352ME.SPC
[sigmove 19:48:35 DEBUG] transformed S352Mf.SPC -> S352MF.SPC
[Status 19:48:35 INFO] data for S352 transferred to science data processing
[Tidy 19:48:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:48:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:48:35 INFO] resetting WatchDogTimer
[Status 19:48:35 INFO] Starting Set [AERI set: name T352, 6 scans, 0 angle, D16300 command]
[Ingest 19:48:35 INFO] Sending XML status message
[Status 19:48:35 INFO] Mirror angle: 0
[Mirror 19:48:36 INFO] rotating to position T
[Status 19:48:36 INFO] .SET file for ACQ96 ready
[Ingest 19:48:37 INFO] Starting acquisition
[Status 19:48:37 INFO] reading housekeeping
[Status 19:48:55 INFO] acquire complete
[Status 19:48:56 INFO] writing housekeeping
[Sequencer 19:48:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:48:56 INFO] incremented T scene to 352 completed views
[Sequencer 19:48:56 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:48:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:48:56 INFO] incremented to [AERI set: name U352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:48:56 INFO] T352.SIG(18)
[sigmove 19:48:56 DEBUG] transformed T352Ma.SPC -> T352MA.SPC
[sigmove 19:48:56 DEBUG] transformed T352Mb.SPC -> T352MB.SPC
[sigmove 19:48:56 DEBUG] transformed T352Mc.SPC -> T352MC.SPC
[sigmove 19:48:56 DEBUG] transformed T352Md.SPC -> T352MD.SPC
[sigmove 19:48:56 DEBUG] transformed T352Me.SPC -> T352ME.SPC
[sigmove 19:48:56 DEBUG] transformed T352Mf.SPC -> T352MF.SPC
[Status 19:48:56 INFO] data for T352 transferred to science data processing
[Tidy 19:48:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:48:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:48:56 INFO] resetting WatchDogTimer
[Status 19:48:56 INFO] Starting Set [AERI set: name U352, 6 scans, 0 angle, D16300 command]
[Ingest 19:48:56 INFO] Sending XML status message
[Status 19:48:56 INFO] Mirror angle: 0
[Mirror 19:48:57 INFO] rotating to position U
[Status 19:48:57 INFO] .SET file for ACQ96 ready
[Ingest 19:48:58 INFO] Starting acquisition
[Status 19:48:58 INFO] reading housekeeping
[Status 19:49:16 INFO] acquire complete
[Status 19:49:17 INFO] writing housekeeping
[Sequencer 19:49:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:49:17 INFO] incremented U scene to 352 completed views
[Sequencer 19:49:17 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:49:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:49:17 INFO] incremented to [AERI set: name V352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:49:17 INFO] U352.SIG(18)
[sigmove 19:49:17 DEBUG] transformed U352Ma.SPC -> U352MA.SPC
[sigmove 19:49:17 DEBUG] transformed U352Mb.SPC -> U352MB.SPC
[sigmove 19:49:17 DEBUG] transformed U352Mc.SPC -> U352MC.SPC
[sigmove 19:49:17 DEBUG] transformed U352Md.SPC -> U352MD.SPC
[sigmove 19:49:17 DEBUG] transformed U352Me.SPC -> U352ME.SPC
[sigmove 19:49:17 DEBUG] transformed U352Mf.SPC -> U352MF.SPC
[Status 19:49:17 INFO] data for U352 transferred to science data processing
[Tidy 19:49:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:49:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:49:17 INFO] resetting WatchDogTimer
[Status 19:49:18 INFO] Starting Set [AERI set: name V352, 6 scans, 0 angle, D16300 command]
[Ingest 19:49:18 INFO] Sending XML status message
[Status 19:49:18 INFO] Mirror angle: 0
[Mirror 19:49:18 INFO] rotating to position V
[Status 19:49:19 INFO] .SET file for ACQ96 ready
[Ingest 19:49:19 INFO] Starting acquisition
[Status 19:49:20 INFO] reading housekeeping
[Status 19:49:37 INFO] acquire complete
[Status 19:49:38 INFO] writing housekeeping
[Sequencer 19:49:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:49:38 INFO] incremented V scene to 352 completed views
[Sequencer 19:49:38 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:49:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:49:38 INFO] incremented to [AERI set: name W352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:49:38 INFO] V352.SIG(18)
[sigmove 19:49:38 DEBUG] transformed V352Ma.SPC -> V352MA.SPC
[sigmove 19:49:38 DEBUG] transformed V352Mb.SPC -> V352MB.SPC
[sigmove 19:49:38 DEBUG] transformed V352Mc.SPC -> V352MC.SPC
[sigmove 19:49:38 DEBUG] transformed V352Md.SPC -> V352MD.SPC
[sigmove 19:49:38 DEBUG] transformed V352Me.SPC -> V352ME.SPC
[sigmove 19:49:38 DEBUG] transformed V352Mf.SPC -> V352MF.SPC
[Status 19:49:38 INFO] data for V352 transferred to science data processing
[Tidy 19:49:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:49:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:49:38 INFO] resetting WatchDogTimer
[Status 19:49:39 INFO] Starting Set [AERI set: name W352, 6 scans, 0 angle, D16300 command]
[Ingest 19:49:39 INFO] Sending XML status message
[Status 19:49:39 INFO] Mirror angle: 0
[Mirror 19:49:39 INFO] rotating to position W
[Status 19:49:40 INFO] .SET file for ACQ96 ready
[Ingest 19:49:40 INFO] Starting acquisition
[Status 19:49:41 INFO] reading housekeeping
[Status 19:49:59 INFO] acquire complete
[Status 19:50:00 INFO] writing housekeeping
[Sequencer 19:50:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:50:00 INFO] incremented W scene to 352 completed views
[Sequencer 19:50:00 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:50:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:50:00 INFO] incremented to [AERI set: name X352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:50:00 INFO] W352.SIG(18)
[sigmove 19:50:00 DEBUG] transformed W352Ma.SPC -> W352MA.SPC
[sigmove 19:50:00 DEBUG] transformed W352Mb.SPC -> W352MB.SPC
[sigmove 19:50:00 DEBUG] transformed W352Mc.SPC -> W352MC.SPC
[sigmove 19:50:00 DEBUG] transformed W352Md.SPC -> W352MD.SPC
[sigmove 19:50:00 DEBUG] transformed W352Me.SPC -> W352ME.SPC
[sigmove 19:50:00 DEBUG] transformed W352Mf.SPC -> W352MF.SPC
[Status 19:50:00 INFO] data for W352 transferred to science data processing
[Tidy 19:50:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:50:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:50:00 INFO] resetting WatchDogTimer
[Status 19:50:00 INFO] Starting Set [AERI set: name X352, 6 scans, 0 angle, D16300 command]
[Ingest 19:50:00 INFO] Sending XML status message
[Status 19:50:00 INFO] Mirror angle: 0
[Mirror 19:50:01 INFO] rotating to position X
[Status 19:50:01 INFO] .SET file for ACQ96 ready
[Ingest 19:50:02 INFO] Starting acquisition
[Status 19:50:02 INFO] reading housekeeping
[Status 19:50:20 INFO] acquire complete
[Status 19:50:21 INFO] writing housekeeping
[Sequencer 19:50:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:50:21 INFO] incremented X scene to 352 completed views
[Sequencer 19:50:21 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:50:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:50:21 INFO] incremented to [AERI set: name Y352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:50:21 INFO] X352.SIG(18)
[sigmove 19:50:21 DEBUG] transformed X352Ma.SPC -> X352MA.SPC
[sigmove 19:50:21 DEBUG] transformed X352Mb.SPC -> X352MB.SPC
[sigmove 19:50:21 DEBUG] transformed X352Mc.SPC -> X352MC.SPC
[sigmove 19:50:21 DEBUG] transformed X352Md.SPC -> X352MD.SPC
[sigmove 19:50:21 DEBUG] transformed X352Me.SPC -> X352ME.SPC
[sigmove 19:50:21 DEBUG] transformed X352Mf.SPC -> X352MF.SPC
[Status 19:50:21 INFO] data for X352 transferred to science data processing
[Tidy 19:50:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:50:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:50:21 INFO] resetting WatchDogTimer
[Status 19:50:22 INFO] Starting Set [AERI set: name Y352, 6 scans, 0 angle, D16300 command]
[Ingest 19:50:22 INFO] Sending XML status message
[Status 19:50:22 INFO] Mirror angle: 0
[Mirror 19:50:22 INFO] rotating to position Y
[Status 19:50:23 INFO] .SET file for ACQ96 ready
[Ingest 19:50:23 INFO] Starting acquisition
[Status 19:50:23 INFO] reading housekeeping
[Status 19:50:41 INFO] acquire complete
[Status 19:50:42 INFO] writing housekeeping
[Sequencer 19:50:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:50:42 INFO] incremented Y scene to 352 completed views
[Sequencer 19:50:42 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:50:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:50:42 INFO] incremented to [AERI set: name Z352, 6 scans, 0 angle, D16300 command] set
[sigmove 19:50:42 INFO] Y352.SIG(18)
[sigmove 19:50:42 DEBUG] transformed Y352Ma.SPC -> Y352MA.SPC
[sigmove 19:50:42 DEBUG] transformed Y352Mb.SPC -> Y352MB.SPC
[sigmove 19:50:42 DEBUG] transformed Y352Mc.SPC -> Y352MC.SPC
[sigmove 19:50:42 DEBUG] transformed Y352Md.SPC -> Y352MD.SPC
[sigmove 19:50:42 DEBUG] transformed Y352Me.SPC -> Y352ME.SPC
[sigmove 19:50:42 DEBUG] transformed Y352Mf.SPC -> Y352MF.SPC
[Status 19:50:42 INFO] data for Y352 transferred to science data processing
[Tidy 19:50:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:50:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:50:42 INFO] resetting WatchDogTimer
[Status 19:50:43 INFO] Starting Set [AERI set: name Z352, 6 scans, 0 angle, D16300 command]
[Ingest 19:50:43 INFO] Sending XML status message
[Status 19:50:43 INFO] Mirror angle: 0
[Mirror 19:50:43 INFO] rotating to position Z
[Status 19:50:44 INFO] .SET file for ACQ96 ready
[Ingest 19:50:44 INFO] Starting acquisition
[Status 19:50:45 INFO] reading housekeeping
[Status 19:51:03 INFO] acquire complete
[Status 19:51:04 INFO] writing housekeeping
[Sequencer 19:51:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:51:04 INFO] incremented Z scene to 352 completed views
[Sequencer 19:51:04 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:51:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:51:04 INFO] incremented to [AERI set: name H353, 6 scans, 60 angle, D22500 command] set
[sigmove 19:51:04 INFO] Z352.SIG(18)
[sigmove 19:51:04 DEBUG] transformed Z352Ma.SPC -> Z352MA.SPC
[sigmove 19:51:04 DEBUG] transformed Z352Mb.SPC -> Z352MB.SPC
[sigmove 19:51:04 DEBUG] transformed Z352Mc.SPC -> Z352MC.SPC
[sigmove 19:51:04 DEBUG] transformed Z352Md.SPC -> Z352MD.SPC
[sigmove 19:51:04 DEBUG] transformed Z352Me.SPC -> Z352ME.SPC
[sigmove 19:51:04 DEBUG] transformed Z352Mf.SPC -> Z352MF.SPC
[Status 19:51:04 INFO] data for Z352 transferred to science data processing
[Tidy 19:51:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:51:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:51:04 INFO] resetting WatchDogTimer
[Status 19:51:04 INFO] Starting Set [AERI set: name H353, 6 scans, 60 angle, D22500 command]
[Ingest 19:51:04 INFO] Sending XML status message
[Status 19:51:04 INFO] Mirror angle: 60
[Mirror 19:51:05 INFO] rotating to position H
[Status 19:51:06 INFO] .SET file for ACQ96 ready
[Ingest 19:51:06 INFO] Starting acquisition
[Status 19:51:07 INFO] reading housekeeping
[Status 19:51:24 INFO] acquire complete
[Status 19:51:25 INFO] writing housekeeping
[Sequencer 19:51:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:51:25 INFO] incremented H scene to 353 completed views
[Sequencer 19:51:25 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:51:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:51:25 INFO] incremented to [AERI set: name A353, 6 scans, 120 angle, D28300 command] set
[sigmove 19:51:25 INFO] H353.SIG(18)
[sigmove 19:51:25 DEBUG] transformed H353Ma.SPC -> H353MA.SPC
[sigmove 19:51:25 DEBUG] transformed H353Mb.SPC -> H353MB.SPC
[sigmove 19:51:25 DEBUG] transformed H353Mc.SPC -> H353MC.SPC
[sigmove 19:51:25 DEBUG] transformed H353Md.SPC -> H353MD.SPC
[sigmove 19:51:25 DEBUG] transformed H353Me.SPC -> H353ME.SPC
[sigmove 19:51:25 DEBUG] transformed H353Mf.SPC -> H353MF.SPC
[Status 19:51:25 INFO] data for H353 transferred to science data processing
[Tidy 19:51:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:51:25 INFO] A351.FIN(19),H351.FIN(19),S351.FIN(19),T351.FIN(19),U351.FIN(19),V351.FIN(19),W351.FIN(19),X351.FIN(19),Y351.FIN(19),Z351.FIN(19),A352.FIN(19),H352.FIN(19),S352.FIN(19),T352.FIN(19),U352.FIN(19),V352.FIN(19),W352.FIN(19),X352.FIN(19),Y352.FIN(19),Z352.FIN(19)
[sigmove 19:51:25 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:51:25 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:51:31 DEBUG] done zipping
[WatchDog 19:51:32 INFO] resetting WatchDogTimer
[Status 19:51:32 INFO] Starting Set [AERI set: name A353, 6 scans, 120 angle, D28300 command]
[Ingest 19:51:32 INFO] Sending XML status message
[Status 19:51:32 INFO] Mirror angle: 120
[Mirror 19:51:33 INFO] rotating to position A
[Status 19:51:34 INFO] .SET file for ACQ96 ready
[Ingest 19:51:34 INFO] Starting acquisition
[Status 19:51:35 INFO] reading housekeeping
[Status 19:51:52 INFO] acquire complete
[Status 19:51:53 INFO] writing housekeeping
[Sequencer 19:51:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:51:53 INFO] incremented A scene to 353 completed views
[Sequencer 19:51:53 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:51:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:51:53 INFO] incremented to [AERI set: name S353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:51:53 INFO] A353.SIG(18)
[sigmove 19:51:53 DEBUG] transformed A353Ma.SPC -> A353MA.SPC
[sigmove 19:51:53 DEBUG] transformed A353Mb.SPC -> A353MB.SPC
[sigmove 19:51:53 DEBUG] transformed A353Mc.SPC -> A353MC.SPC
[sigmove 19:51:53 DEBUG] transformed A353Md.SPC -> A353MD.SPC
[sigmove 19:51:53 DEBUG] transformed A353Me.SPC -> A353ME.SPC
[sigmove 19:51:53 DEBUG] transformed A353Mf.SPC -> A353MF.SPC
[Status 19:51:53 INFO] data for A353 transferred to science data processing
[Tidy 19:51:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:51:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:51:53 INFO] resetting WatchDogTimer
[Status 19:51:54 INFO] Starting Set [AERI set: name S353, 6 scans, 0 angle, D16300 command]
[Ingest 19:51:54 INFO] Sending XML status message
[Status 19:51:54 INFO] Mirror angle: 0
[Mirror 19:51:54 INFO] rotating to position S
[Status 19:51:56 INFO] .SET file for ACQ96 ready
[Ingest 19:51:56 INFO] Starting acquisition
[Status 19:51:56 INFO] reading housekeeping
[Status 19:52:14 INFO] acquire complete
[Status 19:52:15 INFO] writing housekeeping
[Sequencer 19:52:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:52:15 INFO] incremented S scene to 353 completed views
[Sequencer 19:52:15 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:52:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:52:15 INFO] incremented to [AERI set: name T353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:52:15 INFO] S353.SIG(18)
[sigmove 19:52:15 DEBUG] transformed S353Ma.SPC -> S353MA.SPC
[sigmove 19:52:15 DEBUG] transformed S353Mb.SPC -> S353MB.SPC
[sigmove 19:52:15 DEBUG] transformed S353Mc.SPC -> S353MC.SPC
[sigmove 19:52:15 DEBUG] transformed S353Md.SPC -> S353MD.SPC
[sigmove 19:52:15 DEBUG] transformed S353Me.SPC -> S353ME.SPC
[sigmove 19:52:15 DEBUG] transformed S353Mf.SPC -> S353MF.SPC
[Status 19:52:15 INFO] data for S353 transferred to science data processing
[Tidy 19:52:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:52:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:52:15 INFO] resetting WatchDogTimer
[Status 19:52:16 INFO] Starting Set [AERI set: name T353, 6 scans, 0 angle, D16300 command]
[Ingest 19:52:16 INFO] Sending XML status message
[Status 19:52:16 INFO] Mirror angle: 0
[Mirror 19:52:16 INFO] rotating to position T
[Status 19:52:17 INFO] .SET file for ACQ96 ready
[Ingest 19:52:17 INFO] Starting acquisition
[Status 19:52:18 INFO] reading housekeeping
[Status 19:52:36 INFO] acquire complete
[Status 19:52:37 INFO] writing housekeeping
[Sequencer 19:52:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:52:37 INFO] incremented T scene to 353 completed views
[Sequencer 19:52:37 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:52:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:52:37 INFO] incremented to [AERI set: name U353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:52:37 INFO] T353.SIG(18)
[sigmove 19:52:37 DEBUG] transformed T353Ma.SPC -> T353MA.SPC
[sigmove 19:52:37 DEBUG] transformed T353Mb.SPC -> T353MB.SPC
[sigmove 19:52:37 DEBUG] transformed T353Mc.SPC -> T353MC.SPC
[sigmove 19:52:37 DEBUG] transformed T353Md.SPC -> T353MD.SPC
[sigmove 19:52:37 DEBUG] transformed T353Me.SPC -> T353ME.SPC
[sigmove 19:52:37 DEBUG] transformed T353Mf.SPC -> T353MF.SPC
[Status 19:52:37 INFO] data for T353 transferred to science data processing
[Tidy 19:52:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:52:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:52:37 INFO] resetting WatchDogTimer
[Status 19:52:37 INFO] Starting Set [AERI set: name U353, 6 scans, 0 angle, D16300 command]
[Ingest 19:52:37 INFO] Sending XML status message
[Status 19:52:37 INFO] Mirror angle: 0
[Mirror 19:52:38 INFO] rotating to position U
[Status 19:52:38 INFO] .SET file for ACQ96 ready
[Ingest 19:52:39 INFO] Starting acquisition
[Status 19:52:39 INFO] reading housekeeping
[Status 19:52:57 INFO] acquire complete
[Status 19:52:58 INFO] writing housekeeping
[Sequencer 19:52:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:52:58 INFO] incremented U scene to 353 completed views
[Sequencer 19:52:58 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:52:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:52:58 INFO] incremented to [AERI set: name V353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:52:58 INFO] U353.SIG(18)
[sigmove 19:52:58 DEBUG] transformed U353Ma.SPC -> U353MA.SPC
[sigmove 19:52:58 DEBUG] transformed U353Mb.SPC -> U353MB.SPC
[sigmove 19:52:58 DEBUG] transformed U353Mc.SPC -> U353MC.SPC
[sigmove 19:52:58 DEBUG] transformed U353Md.SPC -> U353MD.SPC
[sigmove 19:52:58 DEBUG] transformed U353Me.SPC -> U353ME.SPC
[sigmove 19:52:58 DEBUG] transformed U353Mf.SPC -> U353MF.SPC
[Status 19:52:58 INFO] data for U353 transferred to science data processing
[Tidy 19:52:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:52:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:52:58 INFO] resetting WatchDogTimer
[Status 19:52:59 INFO] Starting Set [AERI set: name V353, 6 scans, 0 angle, D16300 command]
[Ingest 19:52:59 INFO] Sending XML status message
[Status 19:52:59 INFO] Mirror angle: 0
[Mirror 19:52:59 INFO] rotating to position V
[Status 19:53:00 INFO] .SET file for ACQ96 ready
[Ingest 19:53:00 INFO] Starting acquisition
[Status 19:53:00 INFO] reading housekeeping
[Status 19:53:18 INFO] acquire complete
[Status 19:53:19 INFO] writing housekeeping
[Sequencer 19:53:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:53:19 INFO] incremented V scene to 353 completed views
[Sequencer 19:53:19 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:53:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:53:19 INFO] incremented to [AERI set: name W353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:53:19 INFO] V353.SIG(18)
[sigmove 19:53:19 DEBUG] transformed V353Ma.SPC -> V353MA.SPC
[sigmove 19:53:19 DEBUG] transformed V353Mb.SPC -> V353MB.SPC
[sigmove 19:53:19 DEBUG] transformed V353Mc.SPC -> V353MC.SPC
[sigmove 19:53:19 DEBUG] transformed V353Md.SPC -> V353MD.SPC
[sigmove 19:53:19 DEBUG] transformed V353Me.SPC -> V353ME.SPC
[sigmove 19:53:19 DEBUG] transformed V353Mf.SPC -> V353MF.SPC
[Status 19:53:19 INFO] data for V353 transferred to science data processing
[Tidy 19:53:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:53:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:53:19 INFO] resetting WatchDogTimer
[Status 19:53:20 INFO] Starting Set [AERI set: name W353, 6 scans, 0 angle, D16300 command]
[Ingest 19:53:20 INFO] Sending XML status message
[Status 19:53:20 INFO] Mirror angle: 0
[Mirror 19:53:20 INFO] rotating to position W
[Status 19:53:21 INFO] .SET file for ACQ96 ready
[Ingest 19:53:21 INFO] Starting acquisition
[Status 19:53:22 INFO] reading housekeeping
[Status 19:53:40 INFO] acquire complete
[Status 19:53:41 INFO] writing housekeeping
[Sequencer 19:53:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:53:41 INFO] incremented W scene to 353 completed views
[Sequencer 19:53:41 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:53:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:53:41 INFO] incremented to [AERI set: name X353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:53:41 INFO] W353.SIG(18)
[sigmove 19:53:41 DEBUG] transformed W353Ma.SPC -> W353MA.SPC
[sigmove 19:53:41 DEBUG] transformed W353Mb.SPC -> W353MB.SPC
[sigmove 19:53:41 DEBUG] transformed W353Mc.SPC -> W353MC.SPC
[sigmove 19:53:41 DEBUG] transformed W353Md.SPC -> W353MD.SPC
[sigmove 19:53:41 DEBUG] transformed W353Me.SPC -> W353ME.SPC
[sigmove 19:53:41 DEBUG] transformed W353Mf.SPC -> W353MF.SPC
[Status 19:53:41 INFO] data for W353 transferred to science data processing
[Tidy 19:53:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:53:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:53:41 INFO] resetting WatchDogTimer
[Status 19:53:41 INFO] Starting Set [AERI set: name X353, 6 scans, 0 angle, D16300 command]
[Ingest 19:53:41 INFO] Sending XML status message
[Status 19:53:41 INFO] Mirror angle: 0
[Mirror 19:53:42 INFO] rotating to position X
[Status 19:53:42 INFO] .SET file for ACQ96 ready
[Ingest 19:53:43 INFO] Starting acquisition
[Status 19:53:43 INFO] reading housekeeping
[Status 19:54:01 INFO] acquire complete
[Status 19:54:02 INFO] writing housekeeping
[Sequencer 19:54:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:54:02 INFO] incremented X scene to 353 completed views
[Sequencer 19:54:02 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:54:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:54:02 INFO] incremented to [AERI set: name Y353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:54:02 INFO] X353.SIG(18)
[sigmove 19:54:02 DEBUG] transformed X353Ma.SPC -> X353MA.SPC
[sigmove 19:54:02 DEBUG] transformed X353Mb.SPC -> X353MB.SPC
[sigmove 19:54:02 DEBUG] transformed X353Mc.SPC -> X353MC.SPC
[sigmove 19:54:02 DEBUG] transformed X353Md.SPC -> X353MD.SPC
[sigmove 19:54:02 DEBUG] transformed X353Me.SPC -> X353ME.SPC
[sigmove 19:54:02 DEBUG] transformed X353Mf.SPC -> X353MF.SPC
[Status 19:54:02 INFO] data for X353 transferred to science data processing
[Tidy 19:54:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:54:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:54:02 INFO] resetting WatchDogTimer
[Status 19:54:02 INFO] Starting Set [AERI set: name Y353, 6 scans, 0 angle, D16300 command]
[Ingest 19:54:02 INFO] Sending XML status message
[Status 19:54:03 INFO] Mirror angle: 0
[Mirror 19:54:03 INFO] rotating to position Y
[Status 19:54:04 INFO] .SET file for ACQ96 ready
[Ingest 19:54:04 INFO] Starting acquisition
[Status 19:54:04 INFO] reading housekeeping
[Status 19:54:22 INFO] acquire complete
[Status 19:54:23 INFO] writing housekeeping
[Sequencer 19:54:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:54:23 INFO] incremented Y scene to 353 completed views
[Sequencer 19:54:23 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:54:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:54:23 INFO] incremented to [AERI set: name Z353, 6 scans, 0 angle, D16300 command] set
[sigmove 19:54:23 INFO] Y353.SIG(18)
[sigmove 19:54:23 DEBUG] transformed Y353Ma.SPC -> Y353MA.SPC
[sigmove 19:54:23 DEBUG] transformed Y353Mb.SPC -> Y353MB.SPC
[sigmove 19:54:23 DEBUG] transformed Y353Mc.SPC -> Y353MC.SPC
[sigmove 19:54:23 DEBUG] transformed Y353Md.SPC -> Y353MD.SPC
[sigmove 19:54:23 DEBUG] transformed Y353Me.SPC -> Y353ME.SPC
[sigmove 19:54:23 DEBUG] transformed Y353Mf.SPC -> Y353MF.SPC
[Status 19:54:23 INFO] data for Y353 transferred to science data processing
[Tidy 19:54:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:54:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:54:23 INFO] resetting WatchDogTimer
[Status 19:54:24 INFO] Starting Set [AERI set: name Z353, 6 scans, 0 angle, D16300 command]
[Ingest 19:54:24 INFO] Sending XML status message
[Status 19:54:24 INFO] Mirror angle: 0
[Mirror 19:54:24 INFO] rotating to position Z
[Status 19:54:25 INFO] .SET file for ACQ96 ready
[Ingest 19:54:25 INFO] Starting acquisition
[Status 19:54:26 INFO] reading housekeeping
[Status 19:54:44 INFO] acquire complete
[Status 19:54:45 INFO] writing housekeeping
[Sequencer 19:54:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:54:45 INFO] incremented Z scene to 353 completed views
[Sequencer 19:54:45 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:54:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:54:45 INFO] incremented to [AERI set: name A354, 6 scans, 120 angle, D28300 command] set
[sigmove 19:54:45 INFO] Z353.SIG(18)
[sigmove 19:54:45 DEBUG] transformed Z353Ma.SPC -> Z353MA.SPC
[sigmove 19:54:45 DEBUG] transformed Z353Mb.SPC -> Z353MB.SPC
[sigmove 19:54:45 DEBUG] transformed Z353Mc.SPC -> Z353MC.SPC
[sigmove 19:54:45 DEBUG] transformed Z353Md.SPC -> Z353MD.SPC
[sigmove 19:54:45 DEBUG] transformed Z353Me.SPC -> Z353ME.SPC
[sigmove 19:54:45 DEBUG] transformed Z353Mf.SPC -> Z353MF.SPC
[Status 19:54:45 INFO] data for Z353 transferred to science data processing
[Tidy 19:54:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:54:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:54:45 INFO] resetting WatchDogTimer
[Status 19:54:45 INFO] Starting Set [AERI set: name A354, 6 scans, 120 angle, D28300 command]
[Ingest 19:54:45 INFO] Sending XML status message
[Status 19:54:45 INFO] Mirror angle: 120
[Mirror 19:54:46 INFO] rotating to position A
[Status 19:54:47 INFO] .SET file for ACQ96 ready
[Ingest 19:54:47 INFO] Starting acquisition
[Status 19:54:48 INFO] reading housekeeping
[Status 19:55:06 INFO] acquire complete
[Status 19:55:07 INFO] writing housekeeping
[Sequencer 19:55:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:55:07 INFO] incremented A scene to 354 completed views
[Sequencer 19:55:07 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:55:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:55:07 INFO] incremented to [AERI set: name H354, 6 scans, 60 angle, D22500 command] set
[sigmove 19:55:07 INFO] A354.SIG(18)
[sigmove 19:55:07 DEBUG] transformed A354Ma.SPC -> A354MA.SPC
[sigmove 19:55:07 DEBUG] transformed A354Mb.SPC -> A354MB.SPC
[sigmove 19:55:07 DEBUG] transformed A354Mc.SPC -> A354MC.SPC
[sigmove 19:55:07 DEBUG] transformed A354Md.SPC -> A354MD.SPC
[sigmove 19:55:07 DEBUG] transformed A354Me.SPC -> A354ME.SPC
[sigmove 19:55:07 DEBUG] transformed A354Mf.SPC -> A354MF.SPC
[Status 19:55:07 INFO] data for A354 transferred to science data processing
[Tidy 19:55:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:55:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:55:07 INFO] resetting WatchDogTimer
[Status 19:55:08 INFO] Starting Set [AERI set: name H354, 6 scans, 60 angle, D22500 command]
[Ingest 19:55:08 INFO] Sending XML status message
[Status 19:55:08 INFO] Mirror angle: 60
[Mirror 19:55:08 INFO] rotating to position H
[Status 19:55:09 INFO] .SET file for ACQ96 ready
[Ingest 19:55:09 INFO] Starting acquisition
[Status 19:55:10 INFO] reading housekeeping
[Status 19:55:27 INFO] acquire complete
[Status 19:55:28 INFO] writing housekeeping
[Sequencer 19:55:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:55:28 INFO] incremented H scene to 354 completed views
[Sequencer 19:55:28 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:55:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:55:28 INFO] incremented to [AERI set: name S354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:55:28 INFO] H354.SIG(18)
[sigmove 19:55:28 DEBUG] transformed H354Ma.SPC -> H354MA.SPC
[sigmove 19:55:28 DEBUG] transformed H354Mb.SPC -> H354MB.SPC
[sigmove 19:55:28 DEBUG] transformed H354Mc.SPC -> H354MC.SPC
[sigmove 19:55:28 DEBUG] transformed H354Md.SPC -> H354MD.SPC
[sigmove 19:55:28 DEBUG] transformed H354Me.SPC -> H354ME.SPC
[sigmove 19:55:28 DEBUG] transformed H354Mf.SPC -> H354MF.SPC
[Status 19:55:28 INFO] data for H354 transferred to science data processing
[Tidy 19:55:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:55:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:55:28 INFO] resetting WatchDogTimer
[Status 19:55:29 INFO] Starting Set [AERI set: name S354, 6 scans, 0 angle, D16300 command]
[Ingest 19:55:29 INFO] Sending XML status message
[Status 19:55:29 INFO] Mirror angle: 0
[Mirror 19:55:29 INFO] rotating to position S
[Status 19:55:30 INFO] .SET file for ACQ96 ready
[Ingest 19:55:31 INFO] Starting acquisition
[Status 19:55:31 INFO] reading housekeeping
[Status 19:55:49 INFO] acquire complete
[Status 19:55:50 INFO] writing housekeeping
[Sequencer 19:55:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:55:50 INFO] incremented S scene to 354 completed views
[Sequencer 19:55:50 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:55:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:55:50 INFO] incremented to [AERI set: name T354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:55:50 INFO] S354.SIG(18)
[sigmove 19:55:50 DEBUG] transformed S354Ma.SPC -> S354MA.SPC
[sigmove 19:55:50 DEBUG] transformed S354Mb.SPC -> S354MB.SPC
[sigmove 19:55:50 DEBUG] transformed S354Mc.SPC -> S354MC.SPC
[sigmove 19:55:50 DEBUG] transformed S354Md.SPC -> S354MD.SPC
[sigmove 19:55:50 DEBUG] transformed S354Me.SPC -> S354ME.SPC
[sigmove 19:55:50 DEBUG] transformed S354Mf.SPC -> S354MF.SPC
[Status 19:55:50 INFO] data for S354 transferred to science data processing
[Tidy 19:55:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:55:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:55:50 INFO] resetting WatchDogTimer
[Status 19:55:50 INFO] Starting Set [AERI set: name T354, 6 scans, 0 angle, D16300 command]
[Ingest 19:55:50 INFO] Sending XML status message
[Status 19:55:50 INFO] Mirror angle: 0
[Mirror 19:55:51 INFO] rotating to position T
[Status 19:55:51 INFO] .SET file for ACQ96 ready
[Ingest 19:55:52 INFO] Starting acquisition
[Status 19:55:52 INFO] reading housekeeping
[Status 19:56:10 INFO] acquire complete
[Status 19:56:11 INFO] writing housekeeping
[Sequencer 19:56:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:56:11 INFO] incremented T scene to 354 completed views
[Sequencer 19:56:11 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:56:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:56:11 INFO] incremented to [AERI set: name U354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:56:11 INFO] T354.SIG(18)
[sigmove 19:56:11 DEBUG] transformed T354Ma.SPC -> T354MA.SPC
[sigmove 19:56:11 DEBUG] transformed T354Mb.SPC -> T354MB.SPC
[sigmove 19:56:11 DEBUG] transformed T354Mc.SPC -> T354MC.SPC
[sigmove 19:56:11 DEBUG] transformed T354Md.SPC -> T354MD.SPC
[sigmove 19:56:11 DEBUG] transformed T354Me.SPC -> T354ME.SPC
[sigmove 19:56:11 DEBUG] transformed T354Mf.SPC -> T354MF.SPC
[Status 19:56:11 INFO] data for T354 transferred to science data processing
[Tidy 19:56:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:56:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:56:11 INFO] resetting WatchDogTimer
[Status 19:56:11 INFO] Starting Set [AERI set: name U354, 6 scans, 0 angle, D16300 command]
[Ingest 19:56:11 INFO] Sending XML status message
[Status 19:56:11 INFO] Mirror angle: 0
[Mirror 19:56:12 INFO] rotating to position U
[Status 19:56:12 INFO] .SET file for ACQ96 ready
[Ingest 19:56:13 INFO] Starting acquisition
[Status 19:56:13 INFO] reading housekeeping
[Status 19:56:31 INFO] acquire complete
[Status 19:56:32 INFO] writing housekeeping
[Sequencer 19:56:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:56:32 INFO] incremented U scene to 354 completed views
[Sequencer 19:56:32 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:56:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:56:32 INFO] incremented to [AERI set: name V354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:56:32 INFO] U354.SIG(18)
[sigmove 19:56:32 DEBUG] transformed U354Ma.SPC -> U354MA.SPC
[sigmove 19:56:32 DEBUG] transformed U354Mb.SPC -> U354MB.SPC
[sigmove 19:56:32 DEBUG] transformed U354Mc.SPC -> U354MC.SPC
[sigmove 19:56:32 DEBUG] transformed U354Md.SPC -> U354MD.SPC
[sigmove 19:56:32 DEBUG] transformed U354Me.SPC -> U354ME.SPC
[sigmove 19:56:32 DEBUG] transformed U354Mf.SPC -> U354MF.SPC
[Status 19:56:32 INFO] data for U354 transferred to science data processing
[Tidy 19:56:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:56:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:56:32 INFO] resetting WatchDogTimer
[Status 19:56:33 INFO] Starting Set [AERI set: name V354, 6 scans, 0 angle, D16300 command]
[Ingest 19:56:33 INFO] Sending XML status message
[Status 19:56:33 INFO] Mirror angle: 0
[Mirror 19:56:33 INFO] rotating to position V
[Status 19:56:34 INFO] .SET file for ACQ96 ready
[Ingest 19:56:34 INFO] Starting acquisition
[Status 19:56:35 INFO] reading housekeeping
[Status 19:56:53 INFO] acquire complete
[Status 19:56:54 INFO] writing housekeeping
[Sequencer 19:56:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:56:54 INFO] incremented V scene to 354 completed views
[Sequencer 19:56:54 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:56:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:56:54 INFO] incremented to [AERI set: name W354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:56:54 INFO] V354.SIG(18)
[sigmove 19:56:54 DEBUG] transformed V354Ma.SPC -> V354MA.SPC
[sigmove 19:56:54 DEBUG] transformed V354Mb.SPC -> V354MB.SPC
[sigmove 19:56:54 DEBUG] transformed V354Mc.SPC -> V354MC.SPC
[sigmove 19:56:54 DEBUG] transformed V354Md.SPC -> V354MD.SPC
[sigmove 19:56:54 DEBUG] transformed V354Me.SPC -> V354ME.SPC
[sigmove 19:56:54 DEBUG] transformed V354Mf.SPC -> V354MF.SPC
[Status 19:56:54 INFO] data for V354 transferred to science data processing
[Tidy 19:56:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:56:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:56:54 INFO] resetting WatchDogTimer
[Status 19:56:54 INFO] Starting Set [AERI set: name W354, 6 scans, 0 angle, D16300 command]
[Ingest 19:56:54 INFO] Sending XML status message
[Status 19:56:54 INFO] Mirror angle: 0
[Mirror 19:56:55 INFO] rotating to position W
[Status 19:56:55 INFO] .SET file for ACQ96 ready
[Ingest 19:56:55 INFO] Starting acquisition
[Status 19:56:56 INFO] reading housekeeping
[Status 19:57:14 INFO] acquire complete
[Status 19:57:16 INFO] writing housekeeping
[Sequencer 19:57:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:57:16 INFO] incremented W scene to 354 completed views
[Sequencer 19:57:16 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:57:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:57:16 INFO] incremented to [AERI set: name X354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:57:16 INFO] W354.SIG(18)
[sigmove 19:57:16 DEBUG] transformed W354Ma.SPC -> W354MA.SPC
[sigmove 19:57:16 DEBUG] transformed W354Mb.SPC -> W354MB.SPC
[sigmove 19:57:16 DEBUG] transformed W354Mc.SPC -> W354MC.SPC
[sigmove 19:57:16 DEBUG] transformed W354Md.SPC -> W354MD.SPC
[sigmove 19:57:16 DEBUG] transformed W354Me.SPC -> W354ME.SPC
[sigmove 19:57:16 DEBUG] transformed W354Mf.SPC -> W354MF.SPC
[Status 19:57:16 INFO] data for W354 transferred to science data processing
[Tidy 19:57:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:57:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:57:16 INFO] resetting WatchDogTimer
[Status 19:57:16 INFO] Starting Set [AERI set: name X354, 6 scans, 0 angle, D16300 command]
[Ingest 19:57:16 INFO] Sending XML status message
[Status 19:57:16 INFO] Mirror angle: 0
[Mirror 19:57:17 INFO] rotating to position X
[Status 19:57:17 INFO] .SET file for ACQ96 ready
[Ingest 19:57:18 INFO] Starting acquisition
[Status 19:57:18 INFO] reading housekeeping
[Status 19:57:36 INFO] acquire complete
[Status 19:57:37 INFO] writing housekeeping
[Sequencer 19:57:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:57:37 INFO] incremented X scene to 354 completed views
[Sequencer 19:57:37 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:57:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:57:37 INFO] incremented to [AERI set: name Y354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:57:37 INFO] X354.SIG(18)
[sigmove 19:57:37 DEBUG] transformed X354Ma.SPC -> X354MA.SPC
[sigmove 19:57:37 DEBUG] transformed X354Mb.SPC -> X354MB.SPC
[sigmove 19:57:37 DEBUG] transformed X354Mc.SPC -> X354MC.SPC
[sigmove 19:57:37 DEBUG] transformed X354Md.SPC -> X354MD.SPC
[sigmove 19:57:37 DEBUG] transformed X354Me.SPC -> X354ME.SPC
[sigmove 19:57:37 DEBUG] transformed X354Mf.SPC -> X354MF.SPC
[Status 19:57:37 INFO] data for X354 transferred to science data processing
[Tidy 19:57:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:57:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:57:37 INFO] resetting WatchDogTimer
[Status 19:57:38 INFO] Starting Set [AERI set: name Y354, 6 scans, 0 angle, D16300 command]
[Ingest 19:57:38 INFO] Sending XML status message
[Status 19:57:38 INFO] Mirror angle: 0
[Mirror 19:57:38 INFO] rotating to position Y
[Status 19:57:39 INFO] .SET file for ACQ96 ready
[Ingest 19:57:39 INFO] Starting acquisition
[Status 19:57:40 INFO] reading housekeeping
[Status 19:57:58 INFO] acquire complete
[Status 19:57:59 INFO] writing housekeeping
[Sequencer 19:57:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:57:59 INFO] incremented Y scene to 354 completed views
[Sequencer 19:57:59 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:57:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:57:59 INFO] incremented to [AERI set: name Z354, 6 scans, 0 angle, D16300 command] set
[sigmove 19:57:59 INFO] Y354.SIG(18)
[sigmove 19:57:59 DEBUG] transformed Y354Ma.SPC -> Y354MA.SPC
[sigmove 19:57:59 DEBUG] transformed Y354Mb.SPC -> Y354MB.SPC
[sigmove 19:57:59 DEBUG] transformed Y354Mc.SPC -> Y354MC.SPC
[sigmove 19:57:59 DEBUG] transformed Y354Md.SPC -> Y354MD.SPC
[sigmove 19:57:59 DEBUG] transformed Y354Me.SPC -> Y354ME.SPC
[sigmove 19:57:59 DEBUG] transformed Y354Mf.SPC -> Y354MF.SPC
[Status 19:57:59 INFO] data for Y354 transferred to science data processing
[Tidy 19:57:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:57:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:57:59 INFO] resetting WatchDogTimer
[Status 19:57:59 INFO] Starting Set [AERI set: name Z354, 6 scans, 0 angle, D16300 command]
[Ingest 19:57:59 INFO] Sending XML status message
[Status 19:57:59 INFO] Mirror angle: 0
[Mirror 19:58:00 INFO] rotating to position Z
[Status 19:58:00 INFO] .SET file for ACQ96 ready
[Ingest 19:58:01 INFO] Starting acquisition
[Status 19:58:01 INFO] reading housekeeping
[Status 19:58:19 INFO] acquire complete
[Status 19:58:20 INFO] writing housekeeping
[Sequencer 19:58:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:58:20 INFO] incremented Z scene to 354 completed views
[Sequencer 19:58:20 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 19:58:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:58:20 INFO] incremented to [AERI set: name H355, 6 scans, 60 angle, D22500 command] set
[sigmove 19:58:20 INFO] Z354.SIG(18)
[sigmove 19:58:20 DEBUG] transformed Z354Ma.SPC -> Z354MA.SPC
[sigmove 19:58:20 DEBUG] transformed Z354Mb.SPC -> Z354MB.SPC
[sigmove 19:58:20 DEBUG] transformed Z354Mc.SPC -> Z354MC.SPC
[sigmove 19:58:20 DEBUG] transformed Z354Md.SPC -> Z354MD.SPC
[sigmove 19:58:20 DEBUG] transformed Z354Me.SPC -> Z354ME.SPC
[sigmove 19:58:20 DEBUG] transformed Z354Mf.SPC -> Z354MF.SPC
[Status 19:58:20 INFO] data for Z354 transferred to science data processing
[Tidy 19:58:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:58:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:58:20 INFO] resetting WatchDogTimer
[Status 19:58:20 INFO] Starting Set [AERI set: name H355, 6 scans, 60 angle, D22500 command]
[Ingest 19:58:20 INFO] Sending XML status message
[Status 19:58:20 INFO] Mirror angle: 60
[Mirror 19:58:21 INFO] rotating to position H
[Status 19:58:22 INFO] .SET file for ACQ96 ready
[Ingest 19:58:22 INFO] Starting acquisition
[Status 19:58:23 INFO] reading housekeeping
[Status 19:58:40 INFO] acquire complete
[Status 19:58:41 INFO] writing housekeeping
[Sequencer 19:58:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:58:41 INFO] incremented H scene to 355 completed views
[Sequencer 19:58:41 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 19:58:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:58:41 INFO] incremented to [AERI set: name A355, 6 scans, 120 angle, D28300 command] set
[sigmove 19:58:41 INFO] H355.SIG(18)
[sigmove 19:58:41 DEBUG] transformed H355Ma.SPC -> H355MA.SPC
[sigmove 19:58:41 DEBUG] transformed H355Mb.SPC -> H355MB.SPC
[sigmove 19:58:41 DEBUG] transformed H355Mc.SPC -> H355MC.SPC
[sigmove 19:58:41 DEBUG] transformed H355Md.SPC -> H355MD.SPC
[sigmove 19:58:41 DEBUG] transformed H355Me.SPC -> H355ME.SPC
[sigmove 19:58:41 DEBUG] transformed H355Mf.SPC -> H355MF.SPC
[Status 19:58:41 INFO] data for H355 transferred to science data processing
[Tidy 19:58:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:58:41 INFO] A353.FIN(19),H353.FIN(19),S353.FIN(19),T353.FIN(19),U353.FIN(19),V353.FIN(19),W353.FIN(19),X353.FIN(19),Y353.FIN(19),Z353.FIN(19),A354.FIN(19),H354.FIN(19),S354.FIN(19),T354.FIN(19),U354.FIN(19),V354.FIN(19),W354.FIN(19),X354.FIN(19),Y354.FIN(19),Z354.FIN(19)
[sigmove 19:58:41 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:58:41 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 19:58:48 DEBUG] done zipping
[WatchDog 19:58:48 INFO] resetting WatchDogTimer
[Status 19:58:48 INFO] Starting Set [AERI set: name A355, 6 scans, 120 angle, D28300 command]
[Ingest 19:58:48 INFO] Sending XML status message
[Status 19:58:48 INFO] Mirror angle: 120
[Mirror 19:58:49 INFO] rotating to position A
[Status 19:58:50 INFO] .SET file for ACQ96 ready
[Ingest 19:58:50 INFO] Starting acquisition
[Status 19:58:51 INFO] reading housekeeping
[Status 19:59:08 INFO] acquire complete
[Status 19:59:09 INFO] writing housekeeping
[Sequencer 19:59:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:59:09 INFO] incremented A scene to 355 completed views
[Sequencer 19:59:09 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 19:59:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:59:09 INFO] incremented to [AERI set: name S355, 6 scans, 0 angle, D16300 command] set
[sigmove 19:59:09 INFO] A355.SIG(18)
[sigmove 19:59:09 DEBUG] transformed A355Ma.SPC -> A355MA.SPC
[sigmove 19:59:09 DEBUG] transformed A355Mb.SPC -> A355MB.SPC
[sigmove 19:59:09 DEBUG] transformed A355Mc.SPC -> A355MC.SPC
[sigmove 19:59:09 DEBUG] transformed A355Md.SPC -> A355MD.SPC
[sigmove 19:59:09 DEBUG] transformed A355Me.SPC -> A355ME.SPC
[sigmove 19:59:09 DEBUG] transformed A355Mf.SPC -> A355MF.SPC
[Status 19:59:09 INFO] data for A355 transferred to science data processing
[Tidy 19:59:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:59:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:59:09 INFO] resetting WatchDogTimer
[Status 19:59:10 INFO] Starting Set [AERI set: name S355, 6 scans, 0 angle, D16300 command]
[Ingest 19:59:10 INFO] Sending XML status message
[Status 19:59:10 INFO] Mirror angle: 0
[Mirror 19:59:10 INFO] rotating to position S
[Status 19:59:12 INFO] .SET file for ACQ96 ready
[Ingest 19:59:12 INFO] Starting acquisition
[Status 19:59:13 INFO] reading housekeeping
[Status 19:59:31 INFO] acquire complete
[Status 19:59:32 INFO] writing housekeeping
[Sequencer 19:59:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:59:32 INFO] incremented S scene to 355 completed views
[Sequencer 19:59:32 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:59:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:59:32 INFO] incremented to [AERI set: name T355, 6 scans, 0 angle, D16300 command] set
[sigmove 19:59:32 INFO] S355.SIG(18)
[sigmove 19:59:32 DEBUG] transformed S355Ma.SPC -> S355MA.SPC
[sigmove 19:59:32 DEBUG] transformed S355Mb.SPC -> S355MB.SPC
[sigmove 19:59:32 DEBUG] transformed S355Mc.SPC -> S355MC.SPC
[sigmove 19:59:32 DEBUG] transformed S355Md.SPC -> S355MD.SPC
[sigmove 19:59:32 DEBUG] transformed S355Me.SPC -> S355ME.SPC
[sigmove 19:59:32 DEBUG] transformed S355Mf.SPC -> S355MF.SPC
[Status 19:59:32 INFO] data for S355 transferred to science data processing
[Tidy 19:59:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:59:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:59:32 INFO] resetting WatchDogTimer
[Status 19:59:32 INFO] Starting Set [AERI set: name T355, 6 scans, 0 angle, D16300 command]
[Ingest 19:59:32 INFO] Sending XML status message
[Status 19:59:32 INFO] Mirror angle: 0
[Mirror 19:59:33 INFO] rotating to position T
[Status 19:59:33 INFO] .SET file for ACQ96 ready
[Ingest 19:59:34 INFO] Starting acquisition
[Status 19:59:34 INFO] reading housekeeping
[Status 19:59:52 INFO] acquire complete
[Status 19:59:53 INFO] writing housekeeping
[Sequencer 19:59:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 19:59:53 INFO] incremented T scene to 355 completed views
[Sequencer 19:59:53 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 19:59:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 19:59:53 INFO] incremented to [AERI set: name U355, 6 scans, 0 angle, D16300 command] set
[sigmove 19:59:53 INFO] T355.SIG(18)
[sigmove 19:59:53 DEBUG] transformed T355Ma.SPC -> T355MA.SPC
[sigmove 19:59:53 DEBUG] transformed T355Mb.SPC -> T355MB.SPC
[sigmove 19:59:53 DEBUG] transformed T355Mc.SPC -> T355MC.SPC
[sigmove 19:59:53 DEBUG] transformed T355Md.SPC -> T355MD.SPC
[sigmove 19:59:53 DEBUG] transformed T355Me.SPC -> T355ME.SPC
[sigmove 19:59:53 DEBUG] transformed T355Mf.SPC -> T355MF.SPC
[Status 19:59:53 INFO] data for T355 transferred to science data processing
[Tidy 19:59:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 19:59:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 19:59:53 INFO] resetting WatchDogTimer
[Status 19:59:54 INFO] Starting Set [AERI set: name U355, 6 scans, 0 angle, D16300 command]
[Ingest 19:59:54 INFO] Sending XML status message
[Status 19:59:54 INFO] Mirror angle: 0
[Mirror 19:59:54 INFO] rotating to position U
[Status 19:59:55 INFO] .SET file for ACQ96 ready
[Ingest 19:59:55 INFO] Starting acquisition
[Status 19:59:55 INFO] reading housekeeping
[Status 20:00:13 INFO] acquire complete
[Status 20:00:14 INFO] writing housekeeping
[Sequencer 20:00:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:00:14 INFO] incremented U scene to 355 completed views
[Sequencer 20:00:14 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:00:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:00:14 INFO] incremented to [AERI set: name V355, 6 scans, 0 angle, D16300 command] set
[sigmove 20:00:14 INFO] U355.SIG(18)
[sigmove 20:00:14 DEBUG] transformed U355Ma.SPC -> U355MA.SPC
[sigmove 20:00:14 DEBUG] transformed U355Mb.SPC -> U355MB.SPC
[sigmove 20:00:14 DEBUG] transformed U355Mc.SPC -> U355MC.SPC
[sigmove 20:00:14 DEBUG] transformed U355Md.SPC -> U355MD.SPC
[sigmove 20:00:14 DEBUG] transformed U355Me.SPC -> U355ME.SPC
[sigmove 20:00:14 DEBUG] transformed U355Mf.SPC -> U355MF.SPC
[Status 20:00:14 INFO] data for U355 transferred to science data processing
[Tidy 20:00:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:00:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:00:14 INFO] resetting WatchDogTimer
[Status 20:00:15 INFO] Starting Set [AERI set: name V355, 6 scans, 0 angle, D16300 command]
[Ingest 20:00:15 INFO] Sending XML status message
[Status 20:00:15 INFO] Mirror angle: 0
[Mirror 20:00:15 INFO] rotating to position V
[Status 20:00:16 INFO] .SET file for ACQ96 ready
[Ingest 20:00:16 INFO] Starting acquisition
[Status 20:00:17 INFO] reading housekeeping
[Status 20:00:35 INFO] acquire complete
[Status 20:00:36 INFO] writing housekeeping
[Sequencer 20:00:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:00:36 INFO] incremented V scene to 355 completed views
[Sequencer 20:00:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:00:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:00:36 INFO] incremented to [AERI set: name W355, 6 scans, 0 angle, D16300 command] set
[sigmove 20:00:36 INFO] V355.SIG(18)
[sigmove 20:00:36 DEBUG] transformed V355Ma.SPC -> V355MA.SPC
[sigmove 20:00:36 DEBUG] transformed V355Mb.SPC -> V355MB.SPC
[sigmove 20:00:36 DEBUG] transformed V355Mc.SPC -> V355MC.SPC
[sigmove 20:00:36 DEBUG] transformed V355Md.SPC -> V355MD.SPC
[sigmove 20:00:36 DEBUG] transformed V355Me.SPC -> V355ME.SPC
[sigmove 20:00:36 DEBUG] transformed V355Mf.SPC -> V355MF.SPC
[Status 20:00:36 INFO] data for V355 transferred to science data processing
[Tidy 20:00:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:00:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:00:36 INFO] resetting WatchDogTimer
[Status 20:00:36 INFO] Starting Set [AERI set: name W355, 6 scans, 0 angle, D16300 command]
[Ingest 20:00:36 INFO] Sending XML status message
[Status 20:00:36 INFO] Mirror angle: 0
[Mirror 20:00:37 INFO] rotating to position W
[Status 20:00:37 INFO] .SET file for ACQ96 ready
[Ingest 20:00:38 INFO] Starting acquisition
[Status 20:00:38 INFO] reading housekeeping
[Status 20:00:56 INFO] acquire complete
[Status 20:00:57 INFO] writing housekeeping
[Sequencer 20:00:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:00:57 INFO] incremented W scene to 355 completed views
[Sequencer 20:00:57 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:00:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:00:57 INFO] incremented to [AERI set: name X355, 6 scans, 0 angle, D16300 command] set
[sigmove 20:00:57 INFO] W355.SIG(18)
[sigmove 20:00:57 DEBUG] transformed W355Ma.SPC -> W355MA.SPC
[sigmove 20:00:57 DEBUG] transformed W355Mb.SPC -> W355MB.SPC
[sigmove 20:00:57 DEBUG] transformed W355Mc.SPC -> W355MC.SPC
[sigmove 20:00:57 DEBUG] transformed W355Md.SPC -> W355MD.SPC
[sigmove 20:00:57 DEBUG] transformed W355Me.SPC -> W355ME.SPC
[sigmove 20:00:57 DEBUG] transformed W355Mf.SPC -> W355MF.SPC
[Status 20:00:57 INFO] data for W355 transferred to science data processing
[Tidy 20:00:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:00:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:00:57 INFO] resetting WatchDogTimer
[Status 20:00:57 INFO] Starting Set [AERI set: name X355, 6 scans, 0 angle, D16300 command]
[Ingest 20:00:57 INFO] Sending XML status message
[Status 20:00:57 INFO] Mirror angle: 0
[Mirror 20:00:58 INFO] rotating to position X
[Status 20:00:58 INFO] .SET file for ACQ96 ready
[Ingest 20:00:59 INFO] Starting acquisition
[Status 20:00:59 INFO] reading housekeeping
[Status 20:01:17 INFO] acquire complete
[Status 20:01:18 INFO] writing housekeeping
[Sequencer 20:01:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:01:18 INFO] incremented X scene to 355 completed views
[Sequencer 20:01:18 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:01:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:01:18 INFO] incremented to [AERI set: name Y355, 6 scans, 0 angle, D16300 command] set
[sigmove 20:01:18 INFO] X355.SIG(18)
[sigmove 20:01:18 DEBUG] transformed X355Ma.SPC -> X355MA.SPC
[sigmove 20:01:18 DEBUG] transformed X355Mb.SPC -> X355MB.SPC
[sigmove 20:01:18 DEBUG] transformed X355Mc.SPC -> X355MC.SPC
[sigmove 20:01:18 DEBUG] transformed X355Md.SPC -> X355MD.SPC
[sigmove 20:01:18 DEBUG] transformed X355Me.SPC -> X355ME.SPC
[sigmove 20:01:18 DEBUG] transformed X355Mf.SPC -> X355MF.SPC
[Status 20:01:18 INFO] data for X355 transferred to science data processing
[Tidy 20:01:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:01:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:01:18 INFO] resetting WatchDogTimer
[Status 20:01:19 INFO] Starting Set [AERI set: name Y355, 6 scans, 0 angle, D16300 command]
[Ingest 20:01:19 INFO] Sending XML status message
[Status 20:01:19 INFO] Mirror angle: 0
[Mirror 20:01:19 INFO] rotating to position Y
[Status 20:01:20 INFO] .SET file for ACQ96 ready
[Ingest 20:01:20 INFO] Starting acquisition
[Status 20:01:21 INFO] reading housekeeping
[Status 20:01:39 INFO] acquire complete
[Status 20:01:40 INFO] writing housekeeping
[Sequencer 20:01:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:01:40 INFO] incremented Y scene to 355 completed views
[Sequencer 20:01:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:01:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:01:40 INFO] incremented to [AERI set: name Z355, 6 scans, 0 angle, D16300 command] set
[sigmove 20:01:40 INFO] Y355.SIG(18)
[sigmove 20:01:40 DEBUG] transformed Y355Ma.SPC -> Y355MA.SPC
[sigmove 20:01:40 DEBUG] transformed Y355Mb.SPC -> Y355MB.SPC
[sigmove 20:01:40 DEBUG] transformed Y355Mc.SPC -> Y355MC.SPC
[sigmove 20:01:40 DEBUG] transformed Y355Md.SPC -> Y355MD.SPC
[sigmove 20:01:40 DEBUG] transformed Y355Me.SPC -> Y355ME.SPC
[sigmove 20:01:40 DEBUG] transformed Y355Mf.SPC -> Y355MF.SPC
[Status 20:01:40 INFO] data for Y355 transferred to science data processing
[Tidy 20:01:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:01:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:01:40 INFO] resetting WatchDogTimer
[Status 20:01:40 INFO] Starting Set [AERI set: name Z355, 6 scans, 0 angle, D16300 command]
[Ingest 20:01:40 INFO] Sending XML status message
[Status 20:01:40 INFO] Mirror angle: 0
[Mirror 20:01:41 INFO] rotating to position Z
[Status 20:01:41 INFO] .SET file for ACQ96 ready
[Ingest 20:01:41 INFO] Starting acquisition
[Status 20:01:42 INFO] reading housekeeping
[Status 20:02:00 INFO] acquire complete
[Status 20:02:01 INFO] writing housekeeping
[Sequencer 20:02:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:02:01 INFO] incremented Z scene to 355 completed views
[Sequencer 20:02:01 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:02:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:02:01 INFO] incremented to [AERI set: name A356, 6 scans, 120 angle, D28300 command] set
[sigmove 20:02:01 INFO] Z355.SIG(18)
[sigmove 20:02:01 DEBUG] transformed Z355Ma.SPC -> Z355MA.SPC
[sigmove 20:02:01 DEBUG] transformed Z355Mb.SPC -> Z355MB.SPC
[sigmove 20:02:01 DEBUG] transformed Z355Mc.SPC -> Z355MC.SPC
[sigmove 20:02:01 DEBUG] transformed Z355Md.SPC -> Z355MD.SPC
[sigmove 20:02:01 DEBUG] transformed Z355Me.SPC -> Z355ME.SPC
[sigmove 20:02:01 DEBUG] transformed Z355Mf.SPC -> Z355MF.SPC
[Status 20:02:01 INFO] data for Z355 transferred to science data processing
[Tidy 20:02:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:02:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:02:01 INFO] resetting WatchDogTimer
[Status 20:02:01 INFO] Starting Set [AERI set: name A356, 6 scans, 120 angle, D28300 command]
[Ingest 20:02:01 INFO] Sending XML status message
[Status 20:02:01 INFO] Mirror angle: 120
[Mirror 20:02:02 INFO] rotating to position A
[Status 20:02:03 INFO] .SET file for ACQ96 ready
[Ingest 20:02:04 INFO] Starting acquisition
[Status 20:02:04 INFO] reading housekeeping
[Status 20:02:22 INFO] acquire complete
[Status 20:02:23 INFO] writing housekeeping
[Sequencer 20:02:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:02:23 INFO] incremented A scene to 356 completed views
[Sequencer 20:02:23 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:02:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:02:23 INFO] incremented to [AERI set: name H356, 6 scans, 60 angle, D22500 command] set
[sigmove 20:02:23 INFO] A356.SIG(18)
[sigmove 20:02:23 DEBUG] transformed A356Ma.SPC -> A356MA.SPC
[sigmove 20:02:23 DEBUG] transformed A356Mb.SPC -> A356MB.SPC
[sigmove 20:02:23 DEBUG] transformed A356Mc.SPC -> A356MC.SPC
[sigmove 20:02:23 DEBUG] transformed A356Md.SPC -> A356MD.SPC
[sigmove 20:02:23 DEBUG] transformed A356Me.SPC -> A356ME.SPC
[sigmove 20:02:23 DEBUG] transformed A356Mf.SPC -> A356MF.SPC
[Status 20:02:23 INFO] data for A356 transferred to science data processing
[Tidy 20:02:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:02:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:02:23 INFO] resetting WatchDogTimer
[Status 20:02:24 INFO] Starting Set [AERI set: name H356, 6 scans, 60 angle, D22500 command]
[Ingest 20:02:24 INFO] Sending XML status message
[Status 20:02:24 INFO] Mirror angle: 60
[Mirror 20:02:24 INFO] rotating to position H
[Status 20:02:25 INFO] .SET file for ACQ96 ready
[Ingest 20:02:26 INFO] Starting acquisition
[Status 20:02:26 INFO] reading housekeeping
[Status 20:02:44 INFO] acquire complete
[Status 20:02:45 INFO] writing housekeeping
[Sequencer 20:02:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:02:45 INFO] incremented H scene to 356 completed views
[Sequencer 20:02:45 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:02:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:02:45 INFO] incremented to [AERI set: name S356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:02:45 INFO] H356.SIG(18)
[sigmove 20:02:45 DEBUG] transformed H356Ma.SPC -> H356MA.SPC
[sigmove 20:02:45 DEBUG] transformed H356Mb.SPC -> H356MB.SPC
[sigmove 20:02:45 DEBUG] transformed H356Mc.SPC -> H356MC.SPC
[sigmove 20:02:45 DEBUG] transformed H356Md.SPC -> H356MD.SPC
[sigmove 20:02:45 DEBUG] transformed H356Me.SPC -> H356ME.SPC
[sigmove 20:02:45 DEBUG] transformed H356Mf.SPC -> H356MF.SPC
[Status 20:02:45 INFO] data for H356 transferred to science data processing
[Tidy 20:02:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:02:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:02:45 INFO] resetting WatchDogTimer
[Status 20:02:45 INFO] Starting Set [AERI set: name S356, 6 scans, 0 angle, D16300 command]
[Ingest 20:02:45 INFO] Sending XML status message
[Status 20:02:45 INFO] Mirror angle: 0
[Mirror 20:02:46 INFO] rotating to position S
[Status 20:02:47 INFO] .SET file for ACQ96 ready
[Ingest 20:02:47 INFO] Starting acquisition
[Status 20:02:48 INFO] reading housekeeping
[Status 20:03:05 INFO] acquire complete
[Status 20:03:06 INFO] writing housekeeping
[Sequencer 20:03:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:03:06 INFO] incremented S scene to 356 completed views
[Sequencer 20:03:06 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:03:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:03:06 INFO] incremented to [AERI set: name T356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:03:06 INFO] S356.SIG(18)
[sigmove 20:03:06 DEBUG] transformed S356Ma.SPC -> S356MA.SPC
[sigmove 20:03:06 DEBUG] transformed S356Mb.SPC -> S356MB.SPC
[sigmove 20:03:06 DEBUG] transformed S356Mc.SPC -> S356MC.SPC
[sigmove 20:03:06 DEBUG] transformed S356Md.SPC -> S356MD.SPC
[sigmove 20:03:06 DEBUG] transformed S356Me.SPC -> S356ME.SPC
[sigmove 20:03:06 DEBUG] transformed S356Mf.SPC -> S356MF.SPC
[Status 20:03:06 INFO] data for S356 transferred to science data processing
[Tidy 20:03:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:03:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:03:06 INFO] resetting WatchDogTimer
[Status 20:03:06 INFO] Starting Set [AERI set: name T356, 6 scans, 0 angle, D16300 command]
[Ingest 20:03:06 INFO] Sending XML status message
[Status 20:03:06 INFO] Mirror angle: 0
[Mirror 20:03:07 INFO] rotating to position T
[Status 20:03:07 INFO] .SET file for ACQ96 ready
[Ingest 20:03:08 INFO] Starting acquisition
[Status 20:03:08 INFO] reading housekeeping
[Status 20:03:26 INFO] acquire complete
[Status 20:03:27 INFO] writing housekeeping
[Sequencer 20:03:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:03:27 INFO] incremented T scene to 356 completed views
[Sequencer 20:03:27 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:03:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:03:27 INFO] incremented to [AERI set: name U356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:03:27 INFO] T356.SIG(18)
[sigmove 20:03:27 DEBUG] transformed T356Ma.SPC -> T356MA.SPC
[sigmove 20:03:27 DEBUG] transformed T356Mb.SPC -> T356MB.SPC
[sigmove 20:03:27 DEBUG] transformed T356Mc.SPC -> T356MC.SPC
[sigmove 20:03:27 DEBUG] transformed T356Md.SPC -> T356MD.SPC
[sigmove 20:03:27 DEBUG] transformed T356Me.SPC -> T356ME.SPC
[sigmove 20:03:27 DEBUG] transformed T356Mf.SPC -> T356MF.SPC
[Status 20:03:27 INFO] data for T356 transferred to science data processing
[Tidy 20:03:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:03:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:03:27 INFO] resetting WatchDogTimer
[Status 20:03:28 INFO] Starting Set [AERI set: name U356, 6 scans, 0 angle, D16300 command]
[Ingest 20:03:28 INFO] Sending XML status message
[Status 20:03:28 INFO] Mirror angle: 0
[Mirror 20:03:28 INFO] rotating to position U
[Status 20:03:29 INFO] .SET file for ACQ96 ready
[Ingest 20:03:29 INFO] Starting acquisition
[Status 20:03:30 INFO] reading housekeeping
[Status 20:03:47 INFO] acquire complete
[Status 20:03:49 INFO] writing housekeeping
[Sequencer 20:03:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:03:49 INFO] incremented U scene to 356 completed views
[Sequencer 20:03:49 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:03:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:03:49 INFO] incremented to [AERI set: name V356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:03:49 INFO] U356.SIG(18)
[sigmove 20:03:49 DEBUG] transformed U356Ma.SPC -> U356MA.SPC
[sigmove 20:03:49 DEBUG] transformed U356Mb.SPC -> U356MB.SPC
[sigmove 20:03:49 DEBUG] transformed U356Mc.SPC -> U356MC.SPC
[sigmove 20:03:49 DEBUG] transformed U356Md.SPC -> U356MD.SPC
[sigmove 20:03:49 DEBUG] transformed U356Me.SPC -> U356ME.SPC
[sigmove 20:03:49 DEBUG] transformed U356Mf.SPC -> U356MF.SPC
[Status 20:03:49 INFO] data for U356 transferred to science data processing
[Tidy 20:03:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:03:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:03:49 INFO] resetting WatchDogTimer
[Status 20:03:49 INFO] Starting Set [AERI set: name V356, 6 scans, 0 angle, D16300 command]
[Ingest 20:03:49 INFO] Sending XML status message
[Status 20:03:49 INFO] Mirror angle: 0
[Mirror 20:03:50 INFO] rotating to position V
[Status 20:03:50 INFO] .SET file for ACQ96 ready
[Ingest 20:03:50 INFO] Starting acquisition
[Status 20:03:51 INFO] reading housekeeping
[Status 20:04:09 INFO] acquire complete
[Status 20:04:10 INFO] writing housekeeping
[Sequencer 20:04:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:04:10 INFO] incremented V scene to 356 completed views
[Sequencer 20:04:10 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:04:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:04:10 INFO] incremented to [AERI set: name W356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:04:10 INFO] V356.SIG(18)
[sigmove 20:04:10 DEBUG] transformed V356Ma.SPC -> V356MA.SPC
[sigmove 20:04:10 DEBUG] transformed V356Mb.SPC -> V356MB.SPC
[sigmove 20:04:10 DEBUG] transformed V356Mc.SPC -> V356MC.SPC
[sigmove 20:04:10 DEBUG] transformed V356Md.SPC -> V356MD.SPC
[sigmove 20:04:10 DEBUG] transformed V356Me.SPC -> V356ME.SPC
[sigmove 20:04:10 DEBUG] transformed V356Mf.SPC -> V356MF.SPC
[Status 20:04:10 INFO] data for V356 transferred to science data processing
[Tidy 20:04:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:04:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:04:10 INFO] resetting WatchDogTimer
[Status 20:04:10 INFO] Starting Set [AERI set: name W356, 6 scans, 0 angle, D16300 command]
[Ingest 20:04:10 INFO] Sending XML status message
[Status 20:04:10 INFO] Mirror angle: 0
[Mirror 20:04:11 INFO] rotating to position W
[Status 20:04:11 INFO] .SET file for ACQ96 ready
[Ingest 20:04:12 INFO] Starting acquisition
[Status 20:04:12 INFO] reading housekeeping
[Status 20:04:30 INFO] acquire complete
[Status 20:04:31 INFO] writing housekeeping
[Sequencer 20:04:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:04:31 INFO] incremented W scene to 356 completed views
[Sequencer 20:04:31 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:04:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:04:31 INFO] incremented to [AERI set: name X356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:04:31 INFO] W356.SIG(18)
[sigmove 20:04:31 DEBUG] transformed W356Ma.SPC -> W356MA.SPC
[sigmove 20:04:31 DEBUG] transformed W356Mb.SPC -> W356MB.SPC
[sigmove 20:04:31 DEBUG] transformed W356Mc.SPC -> W356MC.SPC
[sigmove 20:04:31 DEBUG] transformed W356Md.SPC -> W356MD.SPC
[sigmove 20:04:31 DEBUG] transformed W356Me.SPC -> W356ME.SPC
[sigmove 20:04:31 DEBUG] transformed W356Mf.SPC -> W356MF.SPC
[Status 20:04:31 INFO] data for W356 transferred to science data processing
[Tidy 20:04:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:04:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:04:31 INFO] resetting WatchDogTimer
[Status 20:04:32 INFO] Starting Set [AERI set: name X356, 6 scans, 0 angle, D16300 command]
[Ingest 20:04:32 INFO] Sending XML status message
[Status 20:04:32 INFO] Mirror angle: 0
[Mirror 20:04:32 INFO] rotating to position X
[Status 20:04:33 INFO] .SET file for ACQ96 ready
[Ingest 20:04:33 INFO] Starting acquisition
[Status 20:04:34 INFO] reading housekeeping
[Status 20:04:51 INFO] acquire complete
[Status 20:04:53 INFO] writing housekeeping
[Sequencer 20:04:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:04:53 INFO] incremented X scene to 356 completed views
[Sequencer 20:04:53 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:04:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:04:53 INFO] incremented to [AERI set: name Y356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:04:53 INFO] X356.SIG(18)
[sigmove 20:04:53 DEBUG] transformed X356Ma.SPC -> X356MA.SPC
[sigmove 20:04:53 DEBUG] transformed X356Mb.SPC -> X356MB.SPC
[sigmove 20:04:53 DEBUG] transformed X356Mc.SPC -> X356MC.SPC
[sigmove 20:04:53 DEBUG] transformed X356Md.SPC -> X356MD.SPC
[sigmove 20:04:53 DEBUG] transformed X356Me.SPC -> X356ME.SPC
[sigmove 20:04:53 DEBUG] transformed X356Mf.SPC -> X356MF.SPC
[Status 20:04:53 INFO] data for X356 transferred to science data processing
[Tidy 20:04:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:04:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:04:53 INFO] resetting WatchDogTimer
[Status 20:04:53 INFO] Starting Set [AERI set: name Y356, 6 scans, 0 angle, D16300 command]
[Ingest 20:04:53 INFO] Sending XML status message
[Status 20:04:53 INFO] Mirror angle: 0
[Mirror 20:04:53 INFO] rotating to position Y
[Status 20:04:54 INFO] .SET file for ACQ96 ready
[Ingest 20:04:54 INFO] Starting acquisition
[Status 20:04:55 INFO] reading housekeeping
[Status 20:05:13 INFO] acquire complete
[Status 20:05:14 INFO] writing housekeeping
[Sequencer 20:05:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:05:14 INFO] incremented Y scene to 356 completed views
[Sequencer 20:05:14 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:05:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:05:14 INFO] incremented to [AERI set: name Z356, 6 scans, 0 angle, D16300 command] set
[sigmove 20:05:14 INFO] Y356.SIG(18)
[sigmove 20:05:14 DEBUG] transformed Y356Ma.SPC -> Y356MA.SPC
[sigmove 20:05:14 DEBUG] transformed Y356Mb.SPC -> Y356MB.SPC
[sigmove 20:05:14 DEBUG] transformed Y356Mc.SPC -> Y356MC.SPC
[sigmove 20:05:14 DEBUG] transformed Y356Md.SPC -> Y356MD.SPC
[sigmove 20:05:14 DEBUG] transformed Y356Me.SPC -> Y356ME.SPC
[sigmove 20:05:14 DEBUG] transformed Y356Mf.SPC -> Y356MF.SPC
[Status 20:05:14 INFO] data for Y356 transferred to science data processing
[Tidy 20:05:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:05:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:05:14 INFO] resetting WatchDogTimer
[Status 20:05:14 INFO] Starting Set [AERI set: name Z356, 6 scans, 0 angle, D16300 command]
[Ingest 20:05:14 INFO] Sending XML status message
[Status 20:05:14 INFO] Mirror angle: 0
[Mirror 20:05:15 INFO] rotating to position Z
[Status 20:05:15 INFO] .SET file for ACQ96 ready
[Ingest 20:05:16 INFO] Starting acquisition
[Status 20:05:16 INFO] reading housekeeping
[Status 20:05:34 INFO] acquire complete
[Status 20:05:35 INFO] writing housekeeping
[Sequencer 20:05:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:05:35 INFO] incremented Z scene to 356 completed views
[Sequencer 20:05:35 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:05:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:05:35 INFO] incremented to [AERI set: name H357, 6 scans, 60 angle, D22500 command] set
[sigmove 20:05:35 INFO] Z356.SIG(18)
[sigmove 20:05:35 DEBUG] transformed Z356Ma.SPC -> Z356MA.SPC
[sigmove 20:05:35 DEBUG] transformed Z356Mb.SPC -> Z356MB.SPC
[sigmove 20:05:35 DEBUG] transformed Z356Mc.SPC -> Z356MC.SPC
[sigmove 20:05:35 DEBUG] transformed Z356Md.SPC -> Z356MD.SPC
[sigmove 20:05:35 DEBUG] transformed Z356Me.SPC -> Z356ME.SPC
[sigmove 20:05:35 DEBUG] transformed Z356Mf.SPC -> Z356MF.SPC
[Status 20:05:35 INFO] data for Z356 transferred to science data processing
[Tidy 20:05:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:05:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:05:35 INFO] resetting WatchDogTimer
[Status 20:05:36 INFO] Starting Set [AERI set: name H357, 6 scans, 60 angle, D22500 command]
[Ingest 20:05:36 INFO] Sending XML status message
[Status 20:05:36 INFO] Mirror angle: 60
[Mirror 20:05:36 INFO] rotating to position H
[Status 20:05:37 INFO] .SET file for ACQ96 ready
[Ingest 20:05:38 INFO] Starting acquisition
[Status 20:05:38 INFO] reading housekeeping
[Status 20:05:55 INFO] acquire complete
[Status 20:05:56 INFO] writing housekeeping
[Sequencer 20:05:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:05:57 INFO] incremented H scene to 357 completed views
[Sequencer 20:05:57 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:05:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:05:57 INFO] incremented to [AERI set: name A357, 6 scans, 120 angle, D28300 command] set
[sigmove 20:05:57 INFO] H357.SIG(18)
[sigmove 20:05:57 DEBUG] transformed H357Ma.SPC -> H357MA.SPC
[sigmove 20:05:57 DEBUG] transformed H357Mb.SPC -> H357MB.SPC
[sigmove 20:05:57 DEBUG] transformed H357Mc.SPC -> H357MC.SPC
[sigmove 20:05:57 DEBUG] transformed H357Md.SPC -> H357MD.SPC
[sigmove 20:05:57 DEBUG] transformed H357Me.SPC -> H357ME.SPC
[sigmove 20:05:57 DEBUG] transformed H357Mf.SPC -> H357MF.SPC
[Status 20:05:57 INFO] data for H357 transferred to science data processing
[Tidy 20:05:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:05:57 INFO] A355.FIN(19),H355.FIN(19),S355.FIN(19),T355.FIN(19),U355.FIN(19),V355.FIN(19),W355.FIN(19),X355.FIN(19),Y355.FIN(19),Z355.FIN(19),A356.FIN(19),H356.FIN(19),S356.FIN(19),T356.FIN(19),U356.FIN(19),V356.FIN(19),W356.FIN(19),X356.FIN(19),Y356.FIN(19),Z356.FIN(19)
[sigmove 20:05:57 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:05:57 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:06:03 DEBUG] done zipping
[WatchDog 20:06:03 INFO] resetting WatchDogTimer
[Status 20:06:04 INFO] Starting Set [AERI set: name A357, 6 scans, 120 angle, D28300 command]
[Ingest 20:06:04 INFO] Sending XML status message
[Status 20:06:04 INFO] Mirror angle: 120
[Mirror 20:06:04 INFO] rotating to position A
[Status 20:06:05 INFO] .SET file for ACQ96 ready
[Ingest 20:06:06 INFO] Starting acquisition
[Status 20:06:06 INFO] reading housekeeping
[Status 20:06:23 INFO] acquire complete
[Status 20:06:25 INFO] writing housekeeping
[Sequencer 20:06:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:06:25 INFO] incremented A scene to 357 completed views
[Sequencer 20:06:25 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:06:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:06:25 INFO] incremented to [AERI set: name S357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:06:25 INFO] A357.SIG(18)
[sigmove 20:06:25 DEBUG] transformed A357Ma.SPC -> A357MA.SPC
[sigmove 20:06:25 DEBUG] transformed A357Mb.SPC -> A357MB.SPC
[sigmove 20:06:25 DEBUG] transformed A357Mc.SPC -> A357MC.SPC
[sigmove 20:06:25 DEBUG] transformed A357Md.SPC -> A357MD.SPC
[sigmove 20:06:25 DEBUG] transformed A357Me.SPC -> A357ME.SPC
[sigmove 20:06:25 DEBUG] transformed A357Mf.SPC -> A357MF.SPC
[Status 20:06:25 INFO] data for A357 transferred to science data processing
[Tidy 20:06:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:06:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:06:25 INFO] resetting WatchDogTimer
[Status 20:06:25 INFO] Starting Set [AERI set: name S357, 6 scans, 0 angle, D16300 command]
[Ingest 20:06:25 INFO] Sending XML status message
[Status 20:06:25 INFO] Mirror angle: 0
[Mirror 20:06:25 INFO] rotating to position S
[Status 20:06:27 INFO] .SET file for ACQ96 ready
[Ingest 20:06:27 INFO] Starting acquisition
[Status 20:06:28 INFO] reading housekeeping
[Status 20:06:46 INFO] acquire complete
[Status 20:06:47 INFO] writing housekeeping
[Sequencer 20:06:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:06:47 INFO] incremented S scene to 357 completed views
[Sequencer 20:06:47 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:06:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:06:47 INFO] incremented to [AERI set: name T357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:06:47 INFO] S357.SIG(18)
[sigmove 20:06:47 DEBUG] transformed S357Ma.SPC -> S357MA.SPC
[sigmove 20:06:47 DEBUG] transformed S357Mb.SPC -> S357MB.SPC
[sigmove 20:06:47 DEBUG] transformed S357Mc.SPC -> S357MC.SPC
[sigmove 20:06:47 DEBUG] transformed S357Md.SPC -> S357MD.SPC
[sigmove 20:06:47 DEBUG] transformed S357Me.SPC -> S357ME.SPC
[sigmove 20:06:47 DEBUG] transformed S357Mf.SPC -> S357MF.SPC
[Status 20:06:47 INFO] data for S357 transferred to science data processing
[Tidy 20:06:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:06:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:06:47 INFO] resetting WatchDogTimer
[Status 20:06:47 INFO] Starting Set [AERI set: name T357, 6 scans, 0 angle, D16300 command]
[Ingest 20:06:47 INFO] Sending XML status message
[Status 20:06:47 INFO] Mirror angle: 0
[Mirror 20:06:48 INFO] rotating to position T
[Status 20:06:48 INFO] .SET file for ACQ96 ready
[Ingest 20:06:49 INFO] Starting acquisition
[Status 20:06:49 INFO] reading housekeeping
[Status 20:07:07 INFO] acquire complete
[Status 20:07:08 INFO] writing housekeeping
[Sequencer 20:07:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:07:08 INFO] incremented T scene to 357 completed views
[Sequencer 20:07:08 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:07:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:07:08 INFO] incremented to [AERI set: name U357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:07:08 INFO] T357.SIG(18)
[sigmove 20:07:08 DEBUG] transformed T357Ma.SPC -> T357MA.SPC
[sigmove 20:07:08 DEBUG] transformed T357Mb.SPC -> T357MB.SPC
[sigmove 20:07:08 DEBUG] transformed T357Mc.SPC -> T357MC.SPC
[sigmove 20:07:08 DEBUG] transformed T357Md.SPC -> T357MD.SPC
[sigmove 20:07:08 DEBUG] transformed T357Me.SPC -> T357ME.SPC
[sigmove 20:07:08 DEBUG] transformed T357Mf.SPC -> T357MF.SPC
[Status 20:07:08 INFO] data for T357 transferred to science data processing
[Tidy 20:07:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:07:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:07:08 INFO] resetting WatchDogTimer
[Status 20:07:09 INFO] Starting Set [AERI set: name U357, 6 scans, 0 angle, D16300 command]
[Ingest 20:07:09 INFO] Sending XML status message
[Status 20:07:09 INFO] Mirror angle: 0
[Mirror 20:07:09 INFO] rotating to position U
[Status 20:07:10 INFO] .SET file for ACQ96 ready
[Ingest 20:07:10 INFO] Starting acquisition
[Status 20:07:11 INFO] reading housekeeping
[Status 20:07:28 INFO] acquire complete
[Status 20:07:30 INFO] writing housekeeping
[Sequencer 20:07:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:07:30 INFO] incremented U scene to 357 completed views
[Sequencer 20:07:30 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:07:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:07:30 INFO] incremented to [AERI set: name V357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:07:30 INFO] U357.SIG(18)
[sigmove 20:07:30 DEBUG] transformed U357Ma.SPC -> U357MA.SPC
[sigmove 20:07:30 DEBUG] transformed U357Mb.SPC -> U357MB.SPC
[sigmove 20:07:30 DEBUG] transformed U357Mc.SPC -> U357MC.SPC
[sigmove 20:07:30 DEBUG] transformed U357Md.SPC -> U357MD.SPC
[sigmove 20:07:30 DEBUG] transformed U357Me.SPC -> U357ME.SPC
[sigmove 20:07:30 DEBUG] transformed U357Mf.SPC -> U357MF.SPC
[Status 20:07:30 INFO] data for U357 transferred to science data processing
[Tidy 20:07:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:07:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:07:30 INFO] resetting WatchDogTimer
[Status 20:07:30 INFO] Starting Set [AERI set: name V357, 6 scans, 0 angle, D16300 command]
[Ingest 20:07:30 INFO] Sending XML status message
[Status 20:07:30 INFO] Mirror angle: 0
[Mirror 20:07:31 INFO] rotating to position V
[Status 20:07:31 INFO] .SET file for ACQ96 ready
[Ingest 20:07:32 INFO] Starting acquisition
[Status 20:07:32 INFO] reading housekeeping
[Status 20:07:50 INFO] acquire complete
[Status 20:07:51 INFO] writing housekeeping
[Sequencer 20:07:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:07:51 INFO] incremented V scene to 357 completed views
[Sequencer 20:07:51 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:07:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:07:51 INFO] incremented to [AERI set: name W357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:07:51 INFO] V357.SIG(18)
[sigmove 20:07:51 DEBUG] transformed V357Ma.SPC -> V357MA.SPC
[sigmove 20:07:51 DEBUG] transformed V357Mb.SPC -> V357MB.SPC
[sigmove 20:07:51 DEBUG] transformed V357Mc.SPC -> V357MC.SPC
[sigmove 20:07:51 DEBUG] transformed V357Md.SPC -> V357MD.SPC
[sigmove 20:07:51 DEBUG] transformed V357Me.SPC -> V357ME.SPC
[sigmove 20:07:51 DEBUG] transformed V357Mf.SPC -> V357MF.SPC
[Status 20:07:51 INFO] data for V357 transferred to science data processing
[Tidy 20:07:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:07:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:07:51 INFO] resetting WatchDogTimer
[Status 20:07:51 INFO] Starting Set [AERI set: name W357, 6 scans, 0 angle, D16300 command]
[Ingest 20:07:51 INFO] Sending XML status message
[Status 20:07:51 INFO] Mirror angle: 0
[Mirror 20:07:52 INFO] rotating to position W
[Status 20:07:52 INFO] .SET file for ACQ96 ready
[Ingest 20:07:53 INFO] Starting acquisition
[Status 20:07:53 INFO] reading housekeeping
[Status 20:08:11 INFO] acquire complete
[Status 20:08:12 INFO] writing housekeeping
[Sequencer 20:08:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:08:12 INFO] incremented W scene to 357 completed views
[Sequencer 20:08:12 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:08:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:08:12 INFO] incremented to [AERI set: name X357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:08:12 INFO] W357.SIG(18)
[sigmove 20:08:12 DEBUG] transformed W357Ma.SPC -> W357MA.SPC
[sigmove 20:08:12 DEBUG] transformed W357Mb.SPC -> W357MB.SPC
[sigmove 20:08:12 DEBUG] transformed W357Mc.SPC -> W357MC.SPC
[sigmove 20:08:12 DEBUG] transformed W357Md.SPC -> W357MD.SPC
[sigmove 20:08:12 DEBUG] transformed W357Me.SPC -> W357ME.SPC
[sigmove 20:08:12 DEBUG] transformed W357Mf.SPC -> W357MF.SPC
[Status 20:08:12 INFO] data for W357 transferred to science data processing
[Tidy 20:08:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:08:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:08:12 INFO] resetting WatchDogTimer
[Status 20:08:13 INFO] Starting Set [AERI set: name X357, 6 scans, 0 angle, D16300 command]
[Ingest 20:08:13 INFO] Sending XML status message
[Status 20:08:13 INFO] Mirror angle: 0
[Mirror 20:08:13 INFO] rotating to position X
[Status 20:08:14 INFO] .SET file for ACQ96 ready
[Ingest 20:08:14 INFO] Starting acquisition
[Status 20:08:15 INFO] reading housekeeping
[Status 20:08:32 INFO] acquire complete
[Status 20:08:34 INFO] writing housekeeping
[Sequencer 20:08:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:08:34 INFO] incremented X scene to 357 completed views
[Sequencer 20:08:34 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:08:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:08:34 INFO] incremented to [AERI set: name Y357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:08:34 INFO] X357.SIG(18)
[sigmove 20:08:34 DEBUG] transformed X357Ma.SPC -> X357MA.SPC
[sigmove 20:08:34 DEBUG] transformed X357Mb.SPC -> X357MB.SPC
[sigmove 20:08:34 DEBUG] transformed X357Mc.SPC -> X357MC.SPC
[sigmove 20:08:34 DEBUG] transformed X357Md.SPC -> X357MD.SPC
[sigmove 20:08:34 DEBUG] transformed X357Me.SPC -> X357ME.SPC
[sigmove 20:08:34 DEBUG] transformed X357Mf.SPC -> X357MF.SPC
[Status 20:08:34 INFO] data for X357 transferred to science data processing
[Tidy 20:08:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:08:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:08:34 INFO] resetting WatchDogTimer
[Status 20:08:34 INFO] Starting Set [AERI set: name Y357, 6 scans, 0 angle, D16300 command]
[Ingest 20:08:34 INFO] Sending XML status message
[Status 20:08:34 INFO] Mirror angle: 0
[Mirror 20:08:34 INFO] rotating to position Y
[Status 20:08:35 INFO] .SET file for ACQ96 ready
[Ingest 20:08:35 INFO] Starting acquisition
[Status 20:08:36 INFO] reading housekeeping
[Status 20:08:54 INFO] acquire complete
[Status 20:08:55 INFO] writing housekeeping
[Sequencer 20:08:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:08:55 INFO] incremented Y scene to 357 completed views
[Sequencer 20:08:55 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:08:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:08:55 INFO] incremented to [AERI set: name Z357, 6 scans, 0 angle, D16300 command] set
[sigmove 20:08:55 INFO] Y357.SIG(18)
[sigmove 20:08:55 DEBUG] transformed Y357Ma.SPC -> Y357MA.SPC
[sigmove 20:08:55 DEBUG] transformed Y357Mb.SPC -> Y357MB.SPC
[sigmove 20:08:55 DEBUG] transformed Y357Mc.SPC -> Y357MC.SPC
[sigmove 20:08:55 DEBUG] transformed Y357Md.SPC -> Y357MD.SPC
[sigmove 20:08:55 DEBUG] transformed Y357Me.SPC -> Y357ME.SPC
[sigmove 20:08:55 DEBUG] transformed Y357Mf.SPC -> Y357MF.SPC
[Status 20:08:55 INFO] data for Y357 transferred to science data processing
[Tidy 20:08:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:08:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:08:55 INFO] resetting WatchDogTimer
[Status 20:08:55 INFO] Starting Set [AERI set: name Z357, 6 scans, 0 angle, D16300 command]
[Ingest 20:08:55 INFO] Sending XML status message
[Status 20:08:55 INFO] Mirror angle: 0
[Mirror 20:08:56 INFO] rotating to position Z
[Status 20:08:56 INFO] .SET file for ACQ96 ready
[Ingest 20:08:57 INFO] Starting acquisition
[Status 20:08:57 INFO] reading housekeeping
[Status 20:09:15 INFO] acquire complete
[Status 20:09:16 INFO] writing housekeeping
[Sequencer 20:09:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:09:16 INFO] incremented Z scene to 357 completed views
[Sequencer 20:09:16 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:09:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:09:16 INFO] incremented to [AERI set: name A358, 6 scans, 120 angle, D28300 command] set
[sigmove 20:09:16 INFO] Z357.SIG(18)
[sigmove 20:09:16 DEBUG] transformed Z357Ma.SPC -> Z357MA.SPC
[sigmove 20:09:16 DEBUG] transformed Z357Mb.SPC -> Z357MB.SPC
[sigmove 20:09:16 DEBUG] transformed Z357Mc.SPC -> Z357MC.SPC
[sigmove 20:09:16 DEBUG] transformed Z357Md.SPC -> Z357MD.SPC
[sigmove 20:09:16 DEBUG] transformed Z357Me.SPC -> Z357ME.SPC
[sigmove 20:09:16 DEBUG] transformed Z357Mf.SPC -> Z357MF.SPC
[Status 20:09:16 INFO] data for Z357 transferred to science data processing
[Tidy 20:09:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:09:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:09:16 INFO] resetting WatchDogTimer
[Status 20:09:17 INFO] Starting Set [AERI set: name A358, 6 scans, 120 angle, D28300 command]
[Ingest 20:09:17 INFO] Sending XML status message
[Status 20:09:17 INFO] Mirror angle: 120
[Mirror 20:09:17 INFO] rotating to position A
[Status 20:09:19 INFO] .SET file for ACQ96 ready
[Ingest 20:09:19 INFO] Starting acquisition
[Status 20:09:20 INFO] reading housekeeping
[Status 20:09:37 INFO] acquire complete
[Status 20:09:39 INFO] writing housekeeping
[Sequencer 20:09:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:09:39 INFO] incremented A scene to 358 completed views
[Sequencer 20:09:39 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:09:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:09:39 INFO] incremented to [AERI set: name H358, 6 scans, 60 angle, D22500 command] set
[sigmove 20:09:39 INFO] A358.SIG(18)
[sigmove 20:09:39 DEBUG] transformed A358Ma.SPC -> A358MA.SPC
[sigmove 20:09:39 DEBUG] transformed A358Mb.SPC -> A358MB.SPC
[sigmove 20:09:39 DEBUG] transformed A358Mc.SPC -> A358MC.SPC
[sigmove 20:09:39 DEBUG] transformed A358Md.SPC -> A358MD.SPC
[sigmove 20:09:39 DEBUG] transformed A358Me.SPC -> A358ME.SPC
[sigmove 20:09:39 DEBUG] transformed A358Mf.SPC -> A358MF.SPC
[Status 20:09:39 INFO] data for A358 transferred to science data processing
[Tidy 20:09:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:09:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:09:39 INFO] resetting WatchDogTimer
[Status 20:09:39 INFO] Starting Set [AERI set: name H358, 6 scans, 60 angle, D22500 command]
[Ingest 20:09:39 INFO] Sending XML status message
[Status 20:09:39 INFO] Mirror angle: 60
[Mirror 20:09:40 INFO] rotating to position H
[Status 20:09:41 INFO] .SET file for ACQ96 ready
[Ingest 20:09:41 INFO] Starting acquisition
[Status 20:09:41 INFO] reading housekeeping
[Status 20:09:59 INFO] acquire complete
[Status 20:10:00 INFO] writing housekeeping
[Sequencer 20:10:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:10:00 INFO] incremented H scene to 358 completed views
[Sequencer 20:10:00 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:10:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:10:00 INFO] incremented to [AERI set: name S358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:10:00 INFO] H358.SIG(18)
[sigmove 20:10:00 DEBUG] transformed H358Ma.SPC -> H358MA.SPC
[sigmove 20:10:00 DEBUG] transformed H358Mb.SPC -> H358MB.SPC
[sigmove 20:10:00 DEBUG] transformed H358Mc.SPC -> H358MC.SPC
[sigmove 20:10:00 DEBUG] transformed H358Md.SPC -> H358MD.SPC
[sigmove 20:10:00 DEBUG] transformed H358Me.SPC -> H358ME.SPC
[sigmove 20:10:00 DEBUG] transformed H358Mf.SPC -> H358MF.SPC
[Status 20:10:00 INFO] data for H358 transferred to science data processing
[Tidy 20:10:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:10:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:10:00 INFO] resetting WatchDogTimer
[Status 20:10:00 INFO] Starting Set [AERI set: name S358, 6 scans, 0 angle, D16300 command]
[Ingest 20:10:00 INFO] Sending XML status message
[Status 20:10:00 INFO] Mirror angle: 0
[Mirror 20:10:01 INFO] rotating to position S
[Status 20:10:02 INFO] .SET file for ACQ96 ready
[Ingest 20:10:02 INFO] Starting acquisition
[Status 20:10:03 INFO] reading housekeeping
[Status 20:10:20 INFO] acquire complete
[Status 20:10:21 INFO] writing housekeeping
[Sequencer 20:10:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:10:21 INFO] incremented S scene to 358 completed views
[Sequencer 20:10:21 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:10:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:10:21 INFO] incremented to [AERI set: name T358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:10:21 INFO] S358.SIG(18)
[sigmove 20:10:21 DEBUG] transformed S358Ma.SPC -> S358MA.SPC
[sigmove 20:10:21 DEBUG] transformed S358Mb.SPC -> S358MB.SPC
[sigmove 20:10:21 DEBUG] transformed S358Mc.SPC -> S358MC.SPC
[sigmove 20:10:21 DEBUG] transformed S358Md.SPC -> S358MD.SPC
[sigmove 20:10:21 DEBUG] transformed S358Me.SPC -> S358ME.SPC
[sigmove 20:10:21 DEBUG] transformed S358Mf.SPC -> S358MF.SPC
[Status 20:10:21 INFO] data for S358 transferred to science data processing
[Tidy 20:10:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:10:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:10:21 INFO] resetting WatchDogTimer
[Status 20:10:22 INFO] Starting Set [AERI set: name T358, 6 scans, 0 angle, D16300 command]
[Ingest 20:10:22 INFO] Sending XML status message
[Status 20:10:22 INFO] Mirror angle: 0
[Mirror 20:10:22 INFO] rotating to position T
[Status 20:10:23 INFO] .SET file for ACQ96 ready
[Ingest 20:10:23 INFO] Starting acquisition
[Status 20:10:24 INFO] reading housekeeping
[Status 20:10:41 INFO] acquire complete
[Status 20:10:43 INFO] writing housekeeping
[Sequencer 20:10:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:10:43 INFO] incremented T scene to 358 completed views
[Sequencer 20:10:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:10:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:10:43 INFO] incremented to [AERI set: name U358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:10:43 INFO] T358.SIG(18)
[sigmove 20:10:43 DEBUG] transformed T358Ma.SPC -> T358MA.SPC
[sigmove 20:10:43 DEBUG] transformed T358Mb.SPC -> T358MB.SPC
[sigmove 20:10:43 DEBUG] transformed T358Mc.SPC -> T358MC.SPC
[sigmove 20:10:43 DEBUG] transformed T358Md.SPC -> T358MD.SPC
[sigmove 20:10:43 DEBUG] transformed T358Me.SPC -> T358ME.SPC
[sigmove 20:10:43 DEBUG] transformed T358Mf.SPC -> T358MF.SPC
[Status 20:10:43 INFO] data for T358 transferred to science data processing
[Tidy 20:10:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:10:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:10:43 INFO] resetting WatchDogTimer
[Status 20:10:43 INFO] Starting Set [AERI set: name U358, 6 scans, 0 angle, D16300 command]
[Ingest 20:10:43 INFO] Sending XML status message
[Status 20:10:43 INFO] Mirror angle: 0
[Mirror 20:10:43 INFO] rotating to position U
[Status 20:10:44 INFO] .SET file for ACQ96 ready
[Ingest 20:10:44 INFO] Starting acquisition
[Status 20:10:45 INFO] reading housekeeping
[Status 20:11:03 INFO] acquire complete
[Status 20:11:04 INFO] writing housekeeping
[Sequencer 20:11:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:11:04 INFO] incremented U scene to 358 completed views
[Sequencer 20:11:04 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:11:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:11:04 INFO] incremented to [AERI set: name V358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:11:04 INFO] U358.SIG(18)
[sigmove 20:11:04 DEBUG] transformed U358Ma.SPC -> U358MA.SPC
[sigmove 20:11:04 DEBUG] transformed U358Mb.SPC -> U358MB.SPC
[sigmove 20:11:04 DEBUG] transformed U358Mc.SPC -> U358MC.SPC
[sigmove 20:11:04 DEBUG] transformed U358Md.SPC -> U358MD.SPC
[sigmove 20:11:04 DEBUG] transformed U358Me.SPC -> U358ME.SPC
[sigmove 20:11:04 DEBUG] transformed U358Mf.SPC -> U358MF.SPC
[Status 20:11:04 INFO] data for U358 transferred to science data processing
[Tidy 20:11:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:11:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:11:04 INFO] resetting WatchDogTimer
[Status 20:11:04 INFO] Starting Set [AERI set: name V358, 6 scans, 0 angle, D16300 command]
[Ingest 20:11:04 INFO] Sending XML status message
[Status 20:11:04 INFO] Mirror angle: 0
[Mirror 20:11:05 INFO] rotating to position V
[Status 20:11:05 INFO] .SET file for ACQ96 ready
[Ingest 20:11:06 INFO] Starting acquisition
[Status 20:11:06 INFO] reading housekeeping
[Status 20:11:24 INFO] acquire complete
[Status 20:11:25 INFO] writing housekeeping
[Sequencer 20:11:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:11:25 INFO] incremented V scene to 358 completed views
[Sequencer 20:11:25 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:11:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:11:25 INFO] incremented to [AERI set: name W358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:11:25 INFO] V358.SIG(18)
[sigmove 20:11:25 DEBUG] transformed V358Ma.SPC -> V358MA.SPC
[sigmove 20:11:25 DEBUG] transformed V358Mb.SPC -> V358MB.SPC
[sigmove 20:11:25 DEBUG] transformed V358Mc.SPC -> V358MC.SPC
[sigmove 20:11:25 DEBUG] transformed V358Md.SPC -> V358MD.SPC
[sigmove 20:11:25 DEBUG] transformed V358Me.SPC -> V358ME.SPC
[sigmove 20:11:25 DEBUG] transformed V358Mf.SPC -> V358MF.SPC
[Status 20:11:25 INFO] data for V358 transferred to science data processing
[Tidy 20:11:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:11:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:11:25 INFO] resetting WatchDogTimer
[Status 20:11:26 INFO] Starting Set [AERI set: name W358, 6 scans, 0 angle, D16300 command]
[Ingest 20:11:26 INFO] Sending XML status message
[Status 20:11:26 INFO] Mirror angle: 0
[Mirror 20:11:26 INFO] rotating to position W
[Status 20:11:27 INFO] .SET file for ACQ96 ready
[Ingest 20:11:27 INFO] Starting acquisition
[Status 20:11:27 INFO] reading housekeeping
[Status 20:11:45 INFO] acquire complete
[Status 20:11:46 INFO] writing housekeeping
[Sequencer 20:11:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:11:46 INFO] incremented W scene to 358 completed views
[Sequencer 20:11:46 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:11:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:11:46 INFO] incremented to [AERI set: name X358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:11:46 INFO] W358.SIG(18)
[sigmove 20:11:46 DEBUG] transformed W358Ma.SPC -> W358MA.SPC
[sigmove 20:11:46 DEBUG] transformed W358Mb.SPC -> W358MB.SPC
[sigmove 20:11:46 DEBUG] transformed W358Mc.SPC -> W358MC.SPC
[sigmove 20:11:46 DEBUG] transformed W358Md.SPC -> W358MD.SPC
[sigmove 20:11:46 DEBUG] transformed W358Me.SPC -> W358ME.SPC
[sigmove 20:11:46 DEBUG] transformed W358Mf.SPC -> W358MF.SPC
[Status 20:11:46 INFO] data for W358 transferred to science data processing
[Tidy 20:11:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:11:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:11:46 INFO] resetting WatchDogTimer
[Status 20:11:47 INFO] Starting Set [AERI set: name X358, 6 scans, 0 angle, D16300 command]
[Ingest 20:11:47 INFO] Sending XML status message
[Status 20:11:47 INFO] Mirror angle: 0
[Mirror 20:11:47 INFO] rotating to position X
[Status 20:11:48 INFO] .SET file for ACQ96 ready
[Ingest 20:11:48 INFO] Starting acquisition
[Status 20:11:49 INFO] reading housekeeping
[Status 20:12:07 INFO] acquire complete
[Status 20:12:08 INFO] writing housekeeping
[Sequencer 20:12:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:12:08 INFO] incremented X scene to 358 completed views
[Sequencer 20:12:08 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:12:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:12:08 INFO] incremented to [AERI set: name Y358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:12:08 INFO] X358.SIG(18)
[sigmove 20:12:08 DEBUG] transformed X358Ma.SPC -> X358MA.SPC
[sigmove 20:12:08 DEBUG] transformed X358Mb.SPC -> X358MB.SPC
[sigmove 20:12:08 DEBUG] transformed X358Mc.SPC -> X358MC.SPC
[sigmove 20:12:08 DEBUG] transformed X358Md.SPC -> X358MD.SPC
[sigmove 20:12:08 DEBUG] transformed X358Me.SPC -> X358ME.SPC
[sigmove 20:12:08 DEBUG] transformed X358Mf.SPC -> X358MF.SPC
[Status 20:12:08 INFO] data for X358 transferred to science data processing
[Tidy 20:12:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:12:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:12:08 INFO] resetting WatchDogTimer
[Status 20:12:08 INFO] Starting Set [AERI set: name Y358, 6 scans, 0 angle, D16300 command]
[Ingest 20:12:08 INFO] Sending XML status message
[Status 20:12:08 INFO] Mirror angle: 0
[Mirror 20:12:09 INFO] rotating to position Y
[Status 20:12:09 INFO] .SET file for ACQ96 ready
[Ingest 20:12:10 INFO] Starting acquisition
[Status 20:12:10 INFO] reading housekeeping
[Status 20:12:28 INFO] acquire complete
[Status 20:12:29 INFO] writing housekeeping
[Sequencer 20:12:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:12:29 INFO] incremented Y scene to 358 completed views
[Sequencer 20:12:29 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:12:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:12:29 INFO] incremented to [AERI set: name Z358, 6 scans, 0 angle, D16300 command] set
[sigmove 20:12:29 INFO] Y358.SIG(18)
[sigmove 20:12:29 DEBUG] transformed Y358Ma.SPC -> Y358MA.SPC
[sigmove 20:12:29 DEBUG] transformed Y358Mb.SPC -> Y358MB.SPC
[sigmove 20:12:29 DEBUG] transformed Y358Mc.SPC -> Y358MC.SPC
[sigmove 20:12:29 DEBUG] transformed Y358Md.SPC -> Y358MD.SPC
[sigmove 20:12:29 DEBUG] transformed Y358Me.SPC -> Y358ME.SPC
[sigmove 20:12:29 DEBUG] transformed Y358Mf.SPC -> Y358MF.SPC
[Status 20:12:29 INFO] data for Y358 transferred to science data processing
[Tidy 20:12:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:12:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:12:29 INFO] resetting WatchDogTimer
[Status 20:12:30 INFO] Starting Set [AERI set: name Z358, 6 scans, 0 angle, D16300 command]
[Ingest 20:12:30 INFO] Sending XML status message
[Status 20:12:30 INFO] Mirror angle: 0
[Mirror 20:12:30 INFO] rotating to position Z
[Status 20:12:31 INFO] .SET file for ACQ96 ready
[Ingest 20:12:31 INFO] Starting acquisition
[Status 20:12:32 INFO] reading housekeeping
[Status 20:12:49 INFO] acquire complete
[Status 20:12:50 INFO] writing housekeeping
[Sequencer 20:12:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:12:50 INFO] incremented Z scene to 358 completed views
[Sequencer 20:12:50 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:12:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:12:50 INFO] incremented to [AERI set: name H359, 6 scans, 60 angle, D22500 command] set
[sigmove 20:12:50 INFO] Z358.SIG(18)
[sigmove 20:12:50 DEBUG] transformed Z358Ma.SPC -> Z358MA.SPC
[sigmove 20:12:50 DEBUG] transformed Z358Mb.SPC -> Z358MB.SPC
[sigmove 20:12:50 DEBUG] transformed Z358Mc.SPC -> Z358MC.SPC
[sigmove 20:12:50 DEBUG] transformed Z358Md.SPC -> Z358MD.SPC
[sigmove 20:12:50 DEBUG] transformed Z358Me.SPC -> Z358ME.SPC
[sigmove 20:12:50 DEBUG] transformed Z358Mf.SPC -> Z358MF.SPC
[Status 20:12:50 INFO] data for Z358 transferred to science data processing
[Tidy 20:12:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:12:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:12:50 INFO] resetting WatchDogTimer
[Status 20:12:51 INFO] Starting Set [AERI set: name H359, 6 scans, 60 angle, D22500 command]
[Ingest 20:12:51 INFO] Sending XML status message
[Status 20:12:51 INFO] Mirror angle: 60
[Mirror 20:12:51 INFO] rotating to position H
[Status 20:12:52 INFO] .SET file for ACQ96 ready
[Ingest 20:12:53 INFO] Starting acquisition
[Status 20:12:53 INFO] reading housekeeping
[Status 20:13:11 INFO] acquire complete
[Status 20:13:12 INFO] writing housekeeping
[Sequencer 20:13:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:13:12 INFO] incremented H scene to 359 completed views
[Sequencer 20:13:12 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:13:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:13:12 INFO] incremented to [AERI set: name A359, 6 scans, 120 angle, D28300 command] set
[sigmove 20:13:12 INFO] H359.SIG(18)
[sigmove 20:13:12 DEBUG] transformed H359Ma.SPC -> H359MA.SPC
[sigmove 20:13:12 DEBUG] transformed H359Mb.SPC -> H359MB.SPC
[sigmove 20:13:12 DEBUG] transformed H359Mc.SPC -> H359MC.SPC
[sigmove 20:13:12 DEBUG] transformed H359Md.SPC -> H359MD.SPC
[sigmove 20:13:12 DEBUG] transformed H359Me.SPC -> H359ME.SPC
[sigmove 20:13:12 DEBUG] transformed H359Mf.SPC -> H359MF.SPC
[Status 20:13:12 INFO] data for H359 transferred to science data processing
[Tidy 20:13:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:13:12 INFO] A357.FIN(19),H357.FIN(19),S357.FIN(19),T357.FIN(19),U357.FIN(19),V357.FIN(19),W357.FIN(19),X357.FIN(19),Y357.FIN(19),Z357.FIN(19),A358.FIN(19),H358.FIN(19),S358.FIN(19),T358.FIN(19),U358.FIN(19),V358.FIN(19),W358.FIN(19),X358.FIN(19),Y358.FIN(19),Z358.FIN(19)
[sigmove 20:13:12 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:13:12 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:13:18 DEBUG] done zipping
[WatchDog 20:13:18 INFO] resetting WatchDogTimer
[Status 20:13:19 INFO] Starting Set [AERI set: name A359, 6 scans, 120 angle, D28300 command]
[Ingest 20:13:19 INFO] Sending XML status message
[Status 20:13:19 INFO] Mirror angle: 120
[Mirror 20:13:19 INFO] rotating to position A
[Status 20:13:20 INFO] .SET file for ACQ96 ready
[Ingest 20:13:21 INFO] Starting acquisition
[Status 20:13:21 INFO] reading housekeeping
[Status 20:13:39 INFO] acquire complete
[Status 20:13:40 INFO] writing housekeeping
[Sequencer 20:13:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:13:40 INFO] incremented A scene to 359 completed views
[Sequencer 20:13:40 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:13:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:13:40 INFO] incremented to [AERI set: name S359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:13:40 INFO] A359.SIG(18)
[sigmove 20:13:40 DEBUG] transformed A359Ma.SPC -> A359MA.SPC
[sigmove 20:13:40 DEBUG] transformed A359Mb.SPC -> A359MB.SPC
[sigmove 20:13:40 DEBUG] transformed A359Mc.SPC -> A359MC.SPC
[sigmove 20:13:40 DEBUG] transformed A359Md.SPC -> A359MD.SPC
[sigmove 20:13:40 DEBUG] transformed A359Me.SPC -> A359ME.SPC
[sigmove 20:13:40 DEBUG] transformed A359Mf.SPC -> A359MF.SPC
[Status 20:13:40 INFO] data for A359 transferred to science data processing
[Tidy 20:13:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:13:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:13:40 INFO] resetting WatchDogTimer
[Status 20:13:40 INFO] Starting Set [AERI set: name S359, 6 scans, 0 angle, D16300 command]
[Ingest 20:13:40 INFO] Sending XML status message
[Status 20:13:40 INFO] Mirror angle: 0
[Mirror 20:13:41 INFO] rotating to position S
[Status 20:13:42 INFO] .SET file for ACQ96 ready
[Ingest 20:13:43 INFO] Starting acquisition
[Status 20:13:43 INFO] reading housekeeping
[Status 20:14:01 INFO] acquire complete
[Status 20:14:02 INFO] writing housekeeping
[Sequencer 20:14:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:14:02 INFO] incremented S scene to 359 completed views
[Sequencer 20:14:02 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:14:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:14:02 INFO] incremented to [AERI set: name T359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:14:02 INFO] S359.SIG(18)
[sigmove 20:14:02 DEBUG] transformed S359Ma.SPC -> S359MA.SPC
[sigmove 20:14:02 DEBUG] transformed S359Mb.SPC -> S359MB.SPC
[sigmove 20:14:02 DEBUG] transformed S359Mc.SPC -> S359MC.SPC
[sigmove 20:14:02 DEBUG] transformed S359Md.SPC -> S359MD.SPC
[sigmove 20:14:02 DEBUG] transformed S359Me.SPC -> S359ME.SPC
[sigmove 20:14:02 DEBUG] transformed S359Mf.SPC -> S359MF.SPC
[Status 20:14:02 INFO] data for S359 transferred to science data processing
[Tidy 20:14:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:14:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:14:02 INFO] resetting WatchDogTimer
[Status 20:14:03 INFO] Starting Set [AERI set: name T359, 6 scans, 0 angle, D16300 command]
[Ingest 20:14:03 INFO] Sending XML status message
[Status 20:14:03 INFO] Mirror angle: 0
[Mirror 20:14:03 INFO] rotating to position T
[Status 20:14:04 INFO] .SET file for ACQ96 ready
[Ingest 20:14:04 INFO] Starting acquisition
[Status 20:14:05 INFO] reading housekeeping
[Status 20:14:22 INFO] acquire complete
[Status 20:14:23 INFO] writing housekeeping
[Sequencer 20:14:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:14:23 INFO] incremented T scene to 359 completed views
[Sequencer 20:14:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:14:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:14:23 INFO] incremented to [AERI set: name U359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:14:23 INFO] T359.SIG(18)
[sigmove 20:14:23 DEBUG] transformed T359Ma.SPC -> T359MA.SPC
[sigmove 20:14:23 DEBUG] transformed T359Mb.SPC -> T359MB.SPC
[sigmove 20:14:23 DEBUG] transformed T359Mc.SPC -> T359MC.SPC
[sigmove 20:14:23 DEBUG] transformed T359Md.SPC -> T359MD.SPC
[sigmove 20:14:23 DEBUG] transformed T359Me.SPC -> T359ME.SPC
[sigmove 20:14:23 DEBUG] transformed T359Mf.SPC -> T359MF.SPC
[Status 20:14:23 INFO] data for T359 transferred to science data processing
[Tidy 20:14:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:14:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:14:23 INFO] resetting WatchDogTimer
[Status 20:14:24 INFO] Starting Set [AERI set: name U359, 6 scans, 0 angle, D16300 command]
[Ingest 20:14:24 INFO] Sending XML status message
[Status 20:14:24 INFO] Mirror angle: 0
[Mirror 20:14:24 INFO] rotating to position U
[Status 20:14:25 INFO] .SET file for ACQ96 ready
[Ingest 20:14:25 INFO] Starting acquisition
[Status 20:14:26 INFO] reading housekeeping
[Status 20:14:44 INFO] acquire complete
[Status 20:14:45 INFO] writing housekeeping
[Sequencer 20:14:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:14:45 INFO] incremented U scene to 359 completed views
[Sequencer 20:14:45 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:14:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:14:45 INFO] incremented to [AERI set: name V359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:14:45 INFO] U359.SIG(18)
[sigmove 20:14:45 DEBUG] transformed U359Ma.SPC -> U359MA.SPC
[sigmove 20:14:45 DEBUG] transformed U359Mb.SPC -> U359MB.SPC
[sigmove 20:14:45 DEBUG] transformed U359Mc.SPC -> U359MC.SPC
[sigmove 20:14:45 DEBUG] transformed U359Md.SPC -> U359MD.SPC
[sigmove 20:14:45 DEBUG] transformed U359Me.SPC -> U359ME.SPC
[sigmove 20:14:45 DEBUG] transformed U359Mf.SPC -> U359MF.SPC
[Status 20:14:45 INFO] data for U359 transferred to science data processing
[Tidy 20:14:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:14:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:14:45 INFO] resetting WatchDogTimer
[Status 20:14:45 INFO] Starting Set [AERI set: name V359, 6 scans, 0 angle, D16300 command]
[Ingest 20:14:45 INFO] Sending XML status message
[Status 20:14:45 INFO] Mirror angle: 0
[Mirror 20:14:46 INFO] rotating to position V
[Status 20:14:46 INFO] .SET file for ACQ96 ready
[Ingest 20:14:47 INFO] Starting acquisition
[Status 20:14:47 INFO] reading housekeeping
[Status 20:15:05 INFO] acquire complete
[Status 20:15:06 INFO] writing housekeeping
[Sequencer 20:15:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:15:06 INFO] incremented V scene to 359 completed views
[Sequencer 20:15:06 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:15:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:15:06 INFO] incremented to [AERI set: name W359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:15:06 INFO] V359.SIG(18)
[sigmove 20:15:06 DEBUG] transformed V359Ma.SPC -> V359MA.SPC
[sigmove 20:15:06 DEBUG] transformed V359Mb.SPC -> V359MB.SPC
[sigmove 20:15:06 DEBUG] transformed V359Mc.SPC -> V359MC.SPC
[sigmove 20:15:06 DEBUG] transformed V359Md.SPC -> V359MD.SPC
[sigmove 20:15:06 DEBUG] transformed V359Me.SPC -> V359ME.SPC
[sigmove 20:15:06 DEBUG] transformed V359Mf.SPC -> V359MF.SPC
[Status 20:15:06 INFO] data for V359 transferred to science data processing
[Tidy 20:15:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:15:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:15:06 INFO] resetting WatchDogTimer
[Status 20:15:07 INFO] Starting Set [AERI set: name W359, 6 scans, 0 angle, D16300 command]
[Ingest 20:15:07 INFO] Sending XML status message
[Status 20:15:07 INFO] Mirror angle: 0
[Mirror 20:15:07 INFO] rotating to position W
[Status 20:15:08 INFO] .SET file for ACQ96 ready
[Ingest 20:15:08 INFO] Starting acquisition
[Status 20:15:08 INFO] reading housekeeping
[Status 20:15:26 INFO] acquire complete
[Status 20:15:27 INFO] writing housekeeping
[Sequencer 20:15:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:15:27 INFO] incremented W scene to 359 completed views
[Sequencer 20:15:27 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:15:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:15:27 INFO] incremented to [AERI set: name X359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:15:27 INFO] W359.SIG(18)
[sigmove 20:15:27 DEBUG] transformed W359Ma.SPC -> W359MA.SPC
[sigmove 20:15:27 DEBUG] transformed W359Mb.SPC -> W359MB.SPC
[sigmove 20:15:27 DEBUG] transformed W359Mc.SPC -> W359MC.SPC
[sigmove 20:15:27 DEBUG] transformed W359Md.SPC -> W359MD.SPC
[sigmove 20:15:27 DEBUG] transformed W359Me.SPC -> W359ME.SPC
[sigmove 20:15:27 DEBUG] transformed W359Mf.SPC -> W359MF.SPC
[Status 20:15:27 INFO] data for W359 transferred to science data processing
[Tidy 20:15:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:15:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:15:27 INFO] resetting WatchDogTimer
[Status 20:15:28 INFO] Starting Set [AERI set: name X359, 6 scans, 0 angle, D16300 command]
[Ingest 20:15:28 INFO] Sending XML status message
[Status 20:15:28 INFO] Mirror angle: 0
[Mirror 20:15:28 INFO] rotating to position X
[Status 20:15:29 INFO] .SET file for ACQ96 ready
[Ingest 20:15:29 INFO] Starting acquisition
[Status 20:15:30 INFO] reading housekeeping
[Status 20:15:48 INFO] acquire complete
[Status 20:15:49 INFO] writing housekeeping
[Sequencer 20:15:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:15:49 INFO] incremented X scene to 359 completed views
[Sequencer 20:15:49 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:15:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:15:49 INFO] incremented to [AERI set: name Y359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:15:49 INFO] X359.SIG(18)
[sigmove 20:15:49 DEBUG] transformed X359Ma.SPC -> X359MA.SPC
[sigmove 20:15:49 DEBUG] transformed X359Mb.SPC -> X359MB.SPC
[sigmove 20:15:49 DEBUG] transformed X359Mc.SPC -> X359MC.SPC
[sigmove 20:15:49 DEBUG] transformed X359Md.SPC -> X359MD.SPC
[sigmove 20:15:49 DEBUG] transformed X359Me.SPC -> X359ME.SPC
[sigmove 20:15:49 DEBUG] transformed X359Mf.SPC -> X359MF.SPC
[Status 20:15:49 INFO] data for X359 transferred to science data processing
[Tidy 20:15:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:15:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:15:49 INFO] resetting WatchDogTimer
[Status 20:15:49 INFO] Starting Set [AERI set: name Y359, 6 scans, 0 angle, D16300 command]
[Ingest 20:15:49 INFO] Sending XML status message
[Status 20:15:49 INFO] Mirror angle: 0
[Mirror 20:15:50 INFO] rotating to position Y
[Status 20:15:50 INFO] .SET file for ACQ96 ready
[Ingest 20:15:51 INFO] Starting acquisition
[Status 20:15:51 INFO] reading housekeeping
[Status 20:16:09 INFO] acquire complete
[Status 20:16:10 INFO] writing housekeeping
[Sequencer 20:16:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:16:10 INFO] incremented Y scene to 359 completed views
[Sequencer 20:16:10 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:16:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:16:10 INFO] incremented to [AERI set: name Z359, 6 scans, 0 angle, D16300 command] set
[sigmove 20:16:10 INFO] Y359.SIG(18)
[sigmove 20:16:10 DEBUG] transformed Y359Ma.SPC -> Y359MA.SPC
[sigmove 20:16:10 DEBUG] transformed Y359Mb.SPC -> Y359MB.SPC
[sigmove 20:16:10 DEBUG] transformed Y359Mc.SPC -> Y359MC.SPC
[sigmove 20:16:10 DEBUG] transformed Y359Md.SPC -> Y359MD.SPC
[sigmove 20:16:10 DEBUG] transformed Y359Me.SPC -> Y359ME.SPC
[sigmove 20:16:10 DEBUG] transformed Y359Mf.SPC -> Y359MF.SPC
[Status 20:16:10 INFO] data for Y359 transferred to science data processing
[Tidy 20:16:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:16:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:16:10 INFO] resetting WatchDogTimer
[Status 20:16:10 INFO] Starting Set [AERI set: name Z359, 6 scans, 0 angle, D16300 command]
[Ingest 20:16:10 INFO] Sending XML status message
[Status 20:16:10 INFO] Mirror angle: 0
[Mirror 20:16:11 INFO] rotating to position Z
[Status 20:16:11 INFO] .SET file for ACQ96 ready
[Ingest 20:16:12 INFO] Starting acquisition
[Status 20:16:12 INFO] reading housekeeping
[Status 20:16:30 INFO] acquire complete
[Status 20:16:31 INFO] writing housekeeping
[Sequencer 20:16:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:16:31 INFO] incremented Z scene to 359 completed views
[Sequencer 20:16:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:16:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:16:31 INFO] incremented to [AERI set: name A360, 6 scans, 120 angle, D28300 command] set
[sigmove 20:16:31 INFO] Z359.SIG(18)
[sigmove 20:16:31 DEBUG] transformed Z359Ma.SPC -> Z359MA.SPC
[sigmove 20:16:31 DEBUG] transformed Z359Mb.SPC -> Z359MB.SPC
[sigmove 20:16:31 DEBUG] transformed Z359Mc.SPC -> Z359MC.SPC
[sigmove 20:16:31 DEBUG] transformed Z359Md.SPC -> Z359MD.SPC
[sigmove 20:16:31 DEBUG] transformed Z359Me.SPC -> Z359ME.SPC
[sigmove 20:16:31 DEBUG] transformed Z359Mf.SPC -> Z359MF.SPC
[Status 20:16:31 INFO] data for Z359 transferred to science data processing
[Tidy 20:16:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:16:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:16:31 INFO] resetting WatchDogTimer
[Status 20:16:32 INFO] Starting Set [AERI set: name A360, 6 scans, 120 angle, D28300 command]
[Ingest 20:16:32 INFO] Sending XML status message
[Status 20:16:32 INFO] Mirror angle: 120
[Mirror 20:16:32 INFO] rotating to position A
[Status 20:16:34 INFO] .SET file for ACQ96 ready
[Ingest 20:16:34 INFO] Starting acquisition
[Status 20:16:35 INFO] reading housekeeping
[Status 20:16:53 INFO] acquire complete
[Status 20:16:54 INFO] writing housekeeping
[Sequencer 20:16:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:16:54 INFO] incremented A scene to 360 completed views
[Sequencer 20:16:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:16:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:16:54 INFO] incremented to [AERI set: name H360, 6 scans, 60 angle, D22500 command] set
[sigmove 20:16:54 INFO] A360.SIG(18)
[sigmove 20:16:54 DEBUG] transformed A360Ma.SPC -> A360MA.SPC
[sigmove 20:16:54 DEBUG] transformed A360Mb.SPC -> A360MB.SPC
[sigmove 20:16:54 DEBUG] transformed A360Mc.SPC -> A360MC.SPC
[sigmove 20:16:54 DEBUG] transformed A360Md.SPC -> A360MD.SPC
[sigmove 20:16:54 DEBUG] transformed A360Me.SPC -> A360ME.SPC
[sigmove 20:16:54 DEBUG] transformed A360Mf.SPC -> A360MF.SPC
[Status 20:16:54 INFO] data for A360 transferred to science data processing
[Tidy 20:16:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:16:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:16:54 INFO] resetting WatchDogTimer
[Status 20:16:54 INFO] Starting Set [AERI set: name H360, 6 scans, 60 angle, D22500 command]
[Ingest 20:16:54 INFO] Sending XML status message
[Status 20:16:54 INFO] Mirror angle: 60
[Mirror 20:16:55 INFO] rotating to position H
[Status 20:16:56 INFO] .SET file for ACQ96 ready
[Ingest 20:16:56 INFO] Starting acquisition
[Status 20:16:57 INFO] reading housekeeping
[Status 20:17:14 INFO] acquire complete
[Status 20:17:15 INFO] writing housekeeping
[Sequencer 20:17:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:17:15 INFO] incremented H scene to 360 completed views
[Sequencer 20:17:15 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:17:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:17:15 INFO] incremented to [AERI set: name S360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:17:15 INFO] H360.SIG(18)
[sigmove 20:17:15 DEBUG] transformed H360Ma.SPC -> H360MA.SPC
[sigmove 20:17:15 DEBUG] transformed H360Mb.SPC -> H360MB.SPC
[sigmove 20:17:15 DEBUG] transformed H360Mc.SPC -> H360MC.SPC
[sigmove 20:17:15 DEBUG] transformed H360Md.SPC -> H360MD.SPC
[sigmove 20:17:15 DEBUG] transformed H360Me.SPC -> H360ME.SPC
[sigmove 20:17:15 DEBUG] transformed H360Mf.SPC -> H360MF.SPC
[Status 20:17:15 INFO] data for H360 transferred to science data processing
[Tidy 20:17:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:17:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:17:15 INFO] resetting WatchDogTimer
[Status 20:17:16 INFO] Starting Set [AERI set: name S360, 6 scans, 0 angle, D16300 command]
[Ingest 20:17:16 INFO] Sending XML status message
[Status 20:17:16 INFO] Mirror angle: 0
[Mirror 20:17:16 INFO] rotating to position S
[Status 20:17:17 INFO] .SET file for ACQ96 ready
[Ingest 20:17:17 INFO] Starting acquisition
[Status 20:17:18 INFO] reading housekeeping
[Status 20:17:35 INFO] acquire complete
[Status 20:17:36 INFO] writing housekeeping
[Sequencer 20:17:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:17:36 INFO] incremented S scene to 360 completed views
[Sequencer 20:17:36 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:17:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:17:36 INFO] incremented to [AERI set: name T360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:17:36 INFO] S360.SIG(18)
[sigmove 20:17:36 DEBUG] transformed S360Ma.SPC -> S360MA.SPC
[sigmove 20:17:36 DEBUG] transformed S360Mb.SPC -> S360MB.SPC
[sigmove 20:17:36 DEBUG] transformed S360Mc.SPC -> S360MC.SPC
[sigmove 20:17:36 DEBUG] transformed S360Md.SPC -> S360MD.SPC
[sigmove 20:17:36 DEBUG] transformed S360Me.SPC -> S360ME.SPC
[sigmove 20:17:36 DEBUG] transformed S360Mf.SPC -> S360MF.SPC
[Status 20:17:36 INFO] data for S360 transferred to science data processing
[Tidy 20:17:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:17:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:17:36 INFO] resetting WatchDogTimer
[Status 20:17:37 INFO] Starting Set [AERI set: name T360, 6 scans, 0 angle, D16300 command]
[Ingest 20:17:37 INFO] Sending XML status message
[Status 20:17:37 INFO] Mirror angle: 0
[Mirror 20:17:37 INFO] rotating to position T
[Status 20:17:38 INFO] .SET file for ACQ96 ready
[Ingest 20:17:38 INFO] Starting acquisition
[Status 20:17:39 INFO] reading housekeeping
[Status 20:17:57 INFO] acquire complete
[Status 20:17:58 INFO] writing housekeeping
[Sequencer 20:17:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:17:58 INFO] incremented T scene to 360 completed views
[Sequencer 20:17:58 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:17:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:17:58 INFO] incremented to [AERI set: name U360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:17:58 INFO] T360.SIG(18)
[sigmove 20:17:58 DEBUG] transformed T360Ma.SPC -> T360MA.SPC
[sigmove 20:17:58 DEBUG] transformed T360Mb.SPC -> T360MB.SPC
[sigmove 20:17:58 DEBUG] transformed T360Mc.SPC -> T360MC.SPC
[sigmove 20:17:58 DEBUG] transformed T360Md.SPC -> T360MD.SPC
[sigmove 20:17:58 DEBUG] transformed T360Me.SPC -> T360ME.SPC
[sigmove 20:17:58 DEBUG] transformed T360Mf.SPC -> T360MF.SPC
[Status 20:17:58 INFO] data for T360 transferred to science data processing
[Tidy 20:17:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:17:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:17:58 INFO] resetting WatchDogTimer
[Status 20:17:58 INFO] Starting Set [AERI set: name U360, 6 scans, 0 angle, D16300 command]
[Ingest 20:17:58 INFO] Sending XML status message
[Status 20:17:58 INFO] Mirror angle: 0
[Mirror 20:17:59 INFO] rotating to position U
[Status 20:17:59 INFO] .SET file for ACQ96 ready
[Ingest 20:18:00 INFO] Starting acquisition
[Status 20:18:00 INFO] reading housekeeping
[Status 20:18:18 INFO] acquire complete
[Status 20:18:19 INFO] writing housekeeping
[Sequencer 20:18:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:18:19 INFO] incremented U scene to 360 completed views
[Sequencer 20:18:19 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:18:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:18:19 INFO] incremented to [AERI set: name V360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:18:19 INFO] U360.SIG(18)
[sigmove 20:18:19 DEBUG] transformed U360Ma.SPC -> U360MA.SPC
[sigmove 20:18:19 DEBUG] transformed U360Mb.SPC -> U360MB.SPC
[sigmove 20:18:19 DEBUG] transformed U360Mc.SPC -> U360MC.SPC
[sigmove 20:18:19 DEBUG] transformed U360Md.SPC -> U360MD.SPC
[sigmove 20:18:19 DEBUG] transformed U360Me.SPC -> U360ME.SPC
[sigmove 20:18:19 DEBUG] transformed U360Mf.SPC -> U360MF.SPC
[Status 20:18:19 INFO] data for U360 transferred to science data processing
[Tidy 20:18:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:18:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:18:19 INFO] resetting WatchDogTimer
[Status 20:18:19 INFO] Starting Set [AERI set: name V360, 6 scans, 0 angle, D16300 command]
[Ingest 20:18:19 INFO] Sending XML status message
[Status 20:18:19 INFO] Mirror angle: 0
[Mirror 20:18:20 INFO] rotating to position V
[Status 20:18:20 INFO] .SET file for ACQ96 ready
[Ingest 20:18:21 INFO] Starting acquisition
[Status 20:18:21 INFO] reading housekeeping
[Status 20:18:39 INFO] acquire complete
[Status 20:18:40 INFO] writing housekeeping
[Sequencer 20:18:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:18:40 INFO] incremented V scene to 360 completed views
[Sequencer 20:18:40 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:18:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:18:40 INFO] incremented to [AERI set: name W360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:18:40 INFO] V360.SIG(18)
[sigmove 20:18:40 DEBUG] transformed V360Ma.SPC -> V360MA.SPC
[sigmove 20:18:40 DEBUG] transformed V360Mb.SPC -> V360MB.SPC
[sigmove 20:18:40 DEBUG] transformed V360Mc.SPC -> V360MC.SPC
[sigmove 20:18:40 DEBUG] transformed V360Md.SPC -> V360MD.SPC
[sigmove 20:18:40 DEBUG] transformed V360Me.SPC -> V360ME.SPC
[sigmove 20:18:40 DEBUG] transformed V360Mf.SPC -> V360MF.SPC
[Status 20:18:40 INFO] data for V360 transferred to science data processing
[Tidy 20:18:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:18:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:18:40 INFO] resetting WatchDogTimer
[Status 20:18:41 INFO] Starting Set [AERI set: name W360, 6 scans, 0 angle, D16300 command]
[Ingest 20:18:41 INFO] Sending XML status message
[Status 20:18:41 INFO] Mirror angle: 0
[Mirror 20:18:41 INFO] rotating to position W
[Status 20:18:42 INFO] .SET file for ACQ96 ready
[Ingest 20:18:42 INFO] Starting acquisition
[Status 20:18:43 INFO] reading housekeeping
[Status 20:19:00 INFO] acquire complete
[Status 20:19:02 INFO] writing housekeeping
[Sequencer 20:19:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:19:02 INFO] incremented W scene to 360 completed views
[Sequencer 20:19:02 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:19:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:19:02 INFO] incremented to [AERI set: name X360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:19:02 INFO] W360.SIG(18)
[sigmove 20:19:02 DEBUG] transformed W360Ma.SPC -> W360MA.SPC
[sigmove 20:19:02 DEBUG] transformed W360Mb.SPC -> W360MB.SPC
[sigmove 20:19:02 DEBUG] transformed W360Mc.SPC -> W360MC.SPC
[sigmove 20:19:02 DEBUG] transformed W360Md.SPC -> W360MD.SPC
[sigmove 20:19:02 DEBUG] transformed W360Me.SPC -> W360ME.SPC
[sigmove 20:19:02 DEBUG] transformed W360Mf.SPC -> W360MF.SPC
[Status 20:19:02 INFO] data for W360 transferred to science data processing
[Tidy 20:19:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:19:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:19:02 INFO] resetting WatchDogTimer
[Status 20:19:02 INFO] Starting Set [AERI set: name X360, 6 scans, 0 angle, D16300 command]
[Ingest 20:19:02 INFO] Sending XML status message
[Status 20:19:02 INFO] Mirror angle: 0
[Mirror 20:19:03 INFO] rotating to position X
[Status 20:19:03 INFO] .SET file for ACQ96 ready
[Ingest 20:19:03 INFO] Starting acquisition
[Status 20:19:04 INFO] reading housekeeping
[Status 20:19:22 INFO] acquire complete
[Status 20:19:23 INFO] writing housekeeping
[Sequencer 20:19:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:19:23 INFO] incremented X scene to 360 completed views
[Sequencer 20:19:23 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:19:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:19:23 INFO] incremented to [AERI set: name Y360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:19:23 INFO] X360.SIG(18)
[sigmove 20:19:23 DEBUG] transformed X360Ma.SPC -> X360MA.SPC
[sigmove 20:19:23 DEBUG] transformed X360Mb.SPC -> X360MB.SPC
[sigmove 20:19:23 DEBUG] transformed X360Mc.SPC -> X360MC.SPC
[sigmove 20:19:23 DEBUG] transformed X360Md.SPC -> X360MD.SPC
[sigmove 20:19:23 DEBUG] transformed X360Me.SPC -> X360ME.SPC
[sigmove 20:19:23 DEBUG] transformed X360Mf.SPC -> X360MF.SPC
[Status 20:19:23 INFO] data for X360 transferred to science data processing
[Tidy 20:19:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:19:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:19:23 INFO] resetting WatchDogTimer
[Status 20:19:23 INFO] Starting Set [AERI set: name Y360, 6 scans, 0 angle, D16300 command]
[Ingest 20:19:23 INFO] Sending XML status message
[Status 20:19:23 INFO] Mirror angle: 0
[Mirror 20:19:24 INFO] rotating to position Y
[Status 20:19:24 INFO] .SET file for ACQ96 ready
[Ingest 20:19:25 INFO] Starting acquisition
[Status 20:19:25 INFO] reading housekeeping
[Status 20:19:43 INFO] acquire complete
[Status 20:19:44 INFO] writing housekeeping
[Sequencer 20:19:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:19:44 INFO] incremented Y scene to 360 completed views
[Sequencer 20:19:44 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:19:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:19:44 INFO] incremented to [AERI set: name Z360, 6 scans, 0 angle, D16300 command] set
[sigmove 20:19:44 INFO] Y360.SIG(18)
[sigmove 20:19:44 DEBUG] transformed Y360Ma.SPC -> Y360MA.SPC
[sigmove 20:19:44 DEBUG] transformed Y360Mb.SPC -> Y360MB.SPC
[sigmove 20:19:44 DEBUG] transformed Y360Mc.SPC -> Y360MC.SPC
[sigmove 20:19:44 DEBUG] transformed Y360Md.SPC -> Y360MD.SPC
[sigmove 20:19:44 DEBUG] transformed Y360Me.SPC -> Y360ME.SPC
[sigmove 20:19:44 DEBUG] transformed Y360Mf.SPC -> Y360MF.SPC
[Status 20:19:44 INFO] data for Y360 transferred to science data processing
[Tidy 20:19:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:19:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:19:44 INFO] resetting WatchDogTimer
[Status 20:19:45 INFO] Starting Set [AERI set: name Z360, 6 scans, 0 angle, D16300 command]
[Ingest 20:19:45 INFO] Sending XML status message
[Status 20:19:45 INFO] Mirror angle: 0
[Mirror 20:19:45 INFO] rotating to position Z
[Status 20:19:46 INFO] .SET file for ACQ96 ready
[Ingest 20:19:46 INFO] Starting acquisition
[Status 20:19:47 INFO] reading housekeeping
[Status 20:20:04 INFO] acquire complete
[Status 20:20:06 INFO] writing housekeeping
[Sequencer 20:20:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:20:06 INFO] incremented Z scene to 360 completed views
[Sequencer 20:20:06 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:20:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:20:06 INFO] incremented to [AERI set: name H361, 6 scans, 60 angle, D22500 command] set
[sigmove 20:20:06 INFO] Z360.SIG(18)
[sigmove 20:20:06 DEBUG] transformed Z360Ma.SPC -> Z360MA.SPC
[sigmove 20:20:06 DEBUG] transformed Z360Mb.SPC -> Z360MB.SPC
[sigmove 20:20:06 DEBUG] transformed Z360Mc.SPC -> Z360MC.SPC
[sigmove 20:20:06 DEBUG] transformed Z360Md.SPC -> Z360MD.SPC
[sigmove 20:20:06 DEBUG] transformed Z360Me.SPC -> Z360ME.SPC
[sigmove 20:20:06 DEBUG] transformed Z360Mf.SPC -> Z360MF.SPC
[Status 20:20:06 INFO] data for Z360 transferred to science data processing
[Tidy 20:20:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:20:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:20:06 INFO] resetting WatchDogTimer
[Status 20:20:06 INFO] Starting Set [AERI set: name H361, 6 scans, 60 angle, D22500 command]
[Ingest 20:20:06 INFO] Sending XML status message
[Status 20:20:06 INFO] Mirror angle: 60
[Mirror 20:20:06 INFO] rotating to position H
[Status 20:20:08 INFO] .SET file for ACQ96 ready
[Ingest 20:20:08 INFO] Starting acquisition
[Status 20:20:08 INFO] reading housekeeping
[Status 20:20:26 INFO] acquire complete
[Status 20:20:27 INFO] writing housekeeping
[Sequencer 20:20:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:20:27 INFO] incremented H scene to 361 completed views
[Sequencer 20:20:27 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:20:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:20:27 INFO] incremented to [AERI set: name A361, 6 scans, 120 angle, D28300 command] set
[sigmove 20:20:27 INFO] H361.SIG(18)
[sigmove 20:20:27 DEBUG] transformed H361Ma.SPC -> H361MA.SPC
[sigmove 20:20:27 DEBUG] transformed H361Mb.SPC -> H361MB.SPC
[sigmove 20:20:27 DEBUG] transformed H361Mc.SPC -> H361MC.SPC
[sigmove 20:20:27 DEBUG] transformed H361Md.SPC -> H361MD.SPC
[sigmove 20:20:27 DEBUG] transformed H361Me.SPC -> H361ME.SPC
[sigmove 20:20:27 DEBUG] transformed H361Mf.SPC -> H361MF.SPC
[Status 20:20:27 INFO] data for H361 transferred to science data processing
[Tidy 20:20:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:20:27 INFO] A359.FIN(19),H359.FIN(19),S359.FIN(19),T359.FIN(19),U359.FIN(19),V359.FIN(19),W359.FIN(19),X359.FIN(19),Y359.FIN(19),Z359.FIN(19),A360.FIN(19),H360.FIN(19),S360.FIN(19),T360.FIN(19),U360.FIN(19),V360.FIN(19),W360.FIN(19),X360.FIN(19),Y360.FIN(19),Z360.FIN(19)
[sigmove 20:20:27 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:20:27 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:20:33 DEBUG] done zipping
[WatchDog 20:20:34 INFO] resetting WatchDogTimer
[Status 20:20:34 INFO] Starting Set [AERI set: name A361, 6 scans, 120 angle, D28300 command]
[Ingest 20:20:34 INFO] Sending XML status message
[Status 20:20:34 INFO] Mirror angle: 120
[Mirror 20:20:35 INFO] rotating to position A
[Status 20:20:36 INFO] .SET file for ACQ96 ready
[Ingest 20:20:36 INFO] Starting acquisition
[Status 20:20:37 INFO] reading housekeeping
[Status 20:20:54 INFO] acquire complete
[Status 20:20:55 INFO] writing housekeeping
[Sequencer 20:20:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:20:55 INFO] incremented A scene to 361 completed views
[Sequencer 20:20:55 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:20:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:20:55 INFO] incremented to [AERI set: name S361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:20:55 INFO] A361.SIG(18)
[sigmove 20:20:55 DEBUG] transformed A361Ma.SPC -> A361MA.SPC
[sigmove 20:20:55 DEBUG] transformed A361Mb.SPC -> A361MB.SPC
[sigmove 20:20:55 DEBUG] transformed A361Mc.SPC -> A361MC.SPC
[sigmove 20:20:55 DEBUG] transformed A361Md.SPC -> A361MD.SPC
[sigmove 20:20:55 DEBUG] transformed A361Me.SPC -> A361ME.SPC
[sigmove 20:20:55 DEBUG] transformed A361Mf.SPC -> A361MF.SPC
[Status 20:20:55 INFO] data for A361 transferred to science data processing
[Tidy 20:20:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:20:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:20:55 INFO] resetting WatchDogTimer
[Status 20:20:55 INFO] Starting Set [AERI set: name S361, 6 scans, 0 angle, D16300 command]
[Ingest 20:20:55 INFO] Sending XML status message
[Status 20:20:55 INFO] Mirror angle: 0
[Mirror 20:20:56 INFO] rotating to position S
[Status 20:20:57 INFO] .SET file for ACQ96 ready
[Ingest 20:20:58 INFO] Starting acquisition
[Status 20:20:58 INFO] reading housekeeping
[Status 20:21:16 INFO] acquire complete
[Status 20:21:17 INFO] writing housekeeping
[Sequencer 20:21:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:21:17 INFO] incremented S scene to 361 completed views
[Sequencer 20:21:17 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:21:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:21:17 INFO] incremented to [AERI set: name T361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:21:17 INFO] S361.SIG(18)
[sigmove 20:21:17 DEBUG] transformed S361Ma.SPC -> S361MA.SPC
[sigmove 20:21:17 DEBUG] transformed S361Mb.SPC -> S361MB.SPC
[sigmove 20:21:17 DEBUG] transformed S361Mc.SPC -> S361MC.SPC
[sigmove 20:21:17 DEBUG] transformed S361Md.SPC -> S361MD.SPC
[sigmove 20:21:17 DEBUG] transformed S361Me.SPC -> S361ME.SPC
[sigmove 20:21:17 DEBUG] transformed S361Mf.SPC -> S361MF.SPC
[Status 20:21:17 INFO] data for S361 transferred to science data processing
[Tidy 20:21:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:21:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:21:17 INFO] resetting WatchDogTimer
[Status 20:21:18 INFO] Starting Set [AERI set: name T361, 6 scans, 0 angle, D16300 command]
[Ingest 20:21:18 INFO] Sending XML status message
[Status 20:21:18 INFO] Mirror angle: 0
[Mirror 20:21:18 INFO] rotating to position T
[Status 20:21:19 INFO] .SET file for ACQ96 ready
[Ingest 20:21:19 INFO] Starting acquisition
[Status 20:21:20 INFO] reading housekeeping
[Status 20:21:38 INFO] acquire complete
[Status 20:21:39 INFO] writing housekeeping
[Sequencer 20:21:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:21:39 INFO] incremented T scene to 361 completed views
[Sequencer 20:21:39 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:21:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:21:39 INFO] incremented to [AERI set: name U361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:21:39 INFO] T361.SIG(18)
[sigmove 20:21:39 DEBUG] transformed T361Ma.SPC -> T361MA.SPC
[sigmove 20:21:39 DEBUG] transformed T361Mb.SPC -> T361MB.SPC
[sigmove 20:21:39 DEBUG] transformed T361Mc.SPC -> T361MC.SPC
[sigmove 20:21:39 DEBUG] transformed T361Md.SPC -> T361MD.SPC
[sigmove 20:21:39 DEBUG] transformed T361Me.SPC -> T361ME.SPC
[sigmove 20:21:39 DEBUG] transformed T361Mf.SPC -> T361MF.SPC
[Status 20:21:39 INFO] data for T361 transferred to science data processing
[Tidy 20:21:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:21:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:21:39 INFO] resetting WatchDogTimer
[Status 20:21:39 INFO] Starting Set [AERI set: name U361, 6 scans, 0 angle, D16300 command]
[Ingest 20:21:39 INFO] Sending XML status message
[Status 20:21:39 INFO] Mirror angle: 0
[Mirror 20:21:40 INFO] rotating to position U
[Status 20:21:40 INFO] .SET file for ACQ96 ready
[Ingest 20:21:41 INFO] Starting acquisition
[Status 20:21:41 INFO] reading housekeeping
[Status 20:21:59 INFO] acquire complete
[Status 20:22:00 INFO] writing housekeeping
[Sequencer 20:22:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:22:00 INFO] incremented U scene to 361 completed views
[Sequencer 20:22:00 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:22:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:22:00 INFO] incremented to [AERI set: name V361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:22:00 INFO] U361.SIG(18)
[sigmove 20:22:00 DEBUG] transformed U361Ma.SPC -> U361MA.SPC
[sigmove 20:22:00 DEBUG] transformed U361Mb.SPC -> U361MB.SPC
[sigmove 20:22:00 DEBUG] transformed U361Mc.SPC -> U361MC.SPC
[sigmove 20:22:00 DEBUG] transformed U361Md.SPC -> U361MD.SPC
[sigmove 20:22:00 DEBUG] transformed U361Me.SPC -> U361ME.SPC
[sigmove 20:22:00 DEBUG] transformed U361Mf.SPC -> U361MF.SPC
[Status 20:22:00 INFO] data for U361 transferred to science data processing
[Tidy 20:22:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:22:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:22:00 INFO] resetting WatchDogTimer
[Status 20:22:00 INFO] Starting Set [AERI set: name V361, 6 scans, 0 angle, D16300 command]
[Ingest 20:22:00 INFO] Sending XML status message
[Status 20:22:00 INFO] Mirror angle: 0
[Mirror 20:22:01 INFO] rotating to position V
[Status 20:22:01 INFO] .SET file for ACQ96 ready
[Ingest 20:22:02 INFO] Starting acquisition
[Status 20:22:02 INFO] reading housekeeping
[Status 20:22:20 INFO] acquire complete
[Status 20:22:21 INFO] writing housekeeping
[Sequencer 20:22:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:22:21 INFO] incremented V scene to 361 completed views
[Sequencer 20:22:21 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:22:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:22:21 INFO] incremented to [AERI set: name W361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:22:21 INFO] V361.SIG(18)
[sigmove 20:22:21 DEBUG] transformed V361Ma.SPC -> V361MA.SPC
[sigmove 20:22:21 DEBUG] transformed V361Mb.SPC -> V361MB.SPC
[sigmove 20:22:21 DEBUG] transformed V361Mc.SPC -> V361MC.SPC
[sigmove 20:22:21 DEBUG] transformed V361Md.SPC -> V361MD.SPC
[sigmove 20:22:21 DEBUG] transformed V361Me.SPC -> V361ME.SPC
[sigmove 20:22:21 DEBUG] transformed V361Mf.SPC -> V361MF.SPC
[Status 20:22:21 INFO] data for V361 transferred to science data processing
[Tidy 20:22:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:22:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:22:21 INFO] resetting WatchDogTimer
[Status 20:22:22 INFO] Starting Set [AERI set: name W361, 6 scans, 0 angle, D16300 command]
[Ingest 20:22:22 INFO] Sending XML status message
[Status 20:22:22 INFO] Mirror angle: 0
[Mirror 20:22:22 INFO] rotating to position W
[Status 20:22:23 INFO] .SET file for ACQ96 ready
[Ingest 20:22:23 INFO] Starting acquisition
[Status 20:22:24 INFO] reading housekeeping
[Status 20:22:41 INFO] acquire complete
[Status 20:22:43 INFO] writing housekeeping
[Sequencer 20:22:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:22:43 INFO] incremented W scene to 361 completed views
[Sequencer 20:22:43 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:22:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:22:43 INFO] incremented to [AERI set: name X361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:22:43 INFO] W361.SIG(18)
[sigmove 20:22:43 DEBUG] transformed W361Ma.SPC -> W361MA.SPC
[sigmove 20:22:43 DEBUG] transformed W361Mb.SPC -> W361MB.SPC
[sigmove 20:22:43 DEBUG] transformed W361Mc.SPC -> W361MC.SPC
[sigmove 20:22:43 DEBUG] transformed W361Md.SPC -> W361MD.SPC
[sigmove 20:22:43 DEBUG] transformed W361Me.SPC -> W361ME.SPC
[sigmove 20:22:43 DEBUG] transformed W361Mf.SPC -> W361MF.SPC
[Status 20:22:43 INFO] data for W361 transferred to science data processing
[Tidy 20:22:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:22:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:22:43 INFO] resetting WatchDogTimer
[Status 20:22:43 INFO] Starting Set [AERI set: name X361, 6 scans, 0 angle, D16300 command]
[Ingest 20:22:43 INFO] Sending XML status message
[Status 20:22:43 INFO] Mirror angle: 0
[Mirror 20:22:44 INFO] rotating to position X
[Status 20:22:44 INFO] .SET file for ACQ96 ready
[Ingest 20:22:44 INFO] Starting acquisition
[Status 20:22:45 INFO] reading housekeeping
[Status 20:23:03 INFO] acquire complete
[Status 20:23:04 INFO] writing housekeeping
[Sequencer 20:23:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:23:04 INFO] incremented X scene to 361 completed views
[Sequencer 20:23:04 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:23:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:23:04 INFO] incremented to [AERI set: name Y361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:23:04 INFO] X361.SIG(18)
[sigmove 20:23:04 DEBUG] transformed X361Ma.SPC -> X361MA.SPC
[sigmove 20:23:04 DEBUG] transformed X361Mb.SPC -> X361MB.SPC
[sigmove 20:23:04 DEBUG] transformed X361Mc.SPC -> X361MC.SPC
[sigmove 20:23:04 DEBUG] transformed X361Md.SPC -> X361MD.SPC
[sigmove 20:23:04 DEBUG] transformed X361Me.SPC -> X361ME.SPC
[sigmove 20:23:04 DEBUG] transformed X361Mf.SPC -> X361MF.SPC
[Status 20:23:04 INFO] data for X361 transferred to science data processing
[Tidy 20:23:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:23:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:23:04 INFO] resetting WatchDogTimer
[Status 20:23:04 INFO] Starting Set [AERI set: name Y361, 6 scans, 0 angle, D16300 command]
[Ingest 20:23:04 INFO] Sending XML status message
[Status 20:23:04 INFO] Mirror angle: 0
[Mirror 20:23:05 INFO] rotating to position Y
[Status 20:23:05 INFO] .SET file for ACQ96 ready
[Ingest 20:23:06 INFO] Starting acquisition
[Status 20:23:06 INFO] reading housekeeping
[Status 20:23:24 INFO] acquire complete
[Status 20:23:25 INFO] writing housekeeping
[Sequencer 20:23:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:23:25 INFO] incremented Y scene to 361 completed views
[Sequencer 20:23:25 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:23:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:23:25 INFO] incremented to [AERI set: name Z361, 6 scans, 0 angle, D16300 command] set
[sigmove 20:23:25 INFO] Y361.SIG(18)
[sigmove 20:23:25 DEBUG] transformed Y361Ma.SPC -> Y361MA.SPC
[sigmove 20:23:25 DEBUG] transformed Y361Mb.SPC -> Y361MB.SPC
[sigmove 20:23:25 DEBUG] transformed Y361Mc.SPC -> Y361MC.SPC
[sigmove 20:23:25 DEBUG] transformed Y361Md.SPC -> Y361MD.SPC
[sigmove 20:23:25 DEBUG] transformed Y361Me.SPC -> Y361ME.SPC
[sigmove 20:23:25 DEBUG] transformed Y361Mf.SPC -> Y361MF.SPC
[Status 20:23:25 INFO] data for Y361 transferred to science data processing
[Tidy 20:23:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:23:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:23:25 INFO] resetting WatchDogTimer
[Status 20:23:26 INFO] Starting Set [AERI set: name Z361, 6 scans, 0 angle, D16300 command]
[Ingest 20:23:26 INFO] Sending XML status message
[Status 20:23:26 INFO] Mirror angle: 0
[Mirror 20:23:26 INFO] rotating to position Z
[Status 20:23:27 INFO] .SET file for ACQ96 ready
[Ingest 20:23:27 INFO] Starting acquisition
[Status 20:23:28 INFO] reading housekeeping
[Status 20:23:45 INFO] acquire complete
[Status 20:23:47 INFO] writing housekeeping
[Sequencer 20:23:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:23:47 INFO] incremented Z scene to 361 completed views
[Sequencer 20:23:47 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:23:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:23:47 INFO] incremented to [AERI set: name A362, 6 scans, 120 angle, D28300 command] set
[sigmove 20:23:47 INFO] Z361.SIG(18)
[sigmove 20:23:47 DEBUG] transformed Z361Ma.SPC -> Z361MA.SPC
[sigmove 20:23:47 DEBUG] transformed Z361Mb.SPC -> Z361MB.SPC
[sigmove 20:23:47 DEBUG] transformed Z361Mc.SPC -> Z361MC.SPC
[sigmove 20:23:47 DEBUG] transformed Z361Md.SPC -> Z361MD.SPC
[sigmove 20:23:47 DEBUG] transformed Z361Me.SPC -> Z361ME.SPC
[sigmove 20:23:47 DEBUG] transformed Z361Mf.SPC -> Z361MF.SPC
[Status 20:23:47 INFO] data for Z361 transferred to science data processing
[Tidy 20:23:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:23:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:23:47 INFO] resetting WatchDogTimer
[Status 20:23:47 INFO] Starting Set [AERI set: name A362, 6 scans, 120 angle, D28300 command]
[Ingest 20:23:47 INFO] Sending XML status message
[Status 20:23:47 INFO] Mirror angle: 120
[Mirror 20:23:47 INFO] rotating to position A
[Status 20:23:49 INFO] .SET file for ACQ96 ready
[Ingest 20:23:49 INFO] Starting acquisition
[Status 20:23:50 INFO] reading housekeeping
[Status 20:24:08 INFO] acquire complete
[Status 20:24:09 INFO] writing housekeeping
[Sequencer 20:24:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:24:09 INFO] incremented A scene to 362 completed views
[Sequencer 20:24:09 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:24:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:24:09 INFO] incremented to [AERI set: name H362, 6 scans, 60 angle, D22500 command] set
[sigmove 20:24:09 INFO] A362.SIG(18)
[sigmove 20:24:09 DEBUG] transformed A362Ma.SPC -> A362MA.SPC
[sigmove 20:24:09 DEBUG] transformed A362Mb.SPC -> A362MB.SPC
[sigmove 20:24:09 DEBUG] transformed A362Mc.SPC -> A362MC.SPC
[sigmove 20:24:09 DEBUG] transformed A362Md.SPC -> A362MD.SPC
[sigmove 20:24:09 DEBUG] transformed A362Me.SPC -> A362ME.SPC
[sigmove 20:24:09 DEBUG] transformed A362Mf.SPC -> A362MF.SPC
[Status 20:24:09 INFO] data for A362 transferred to science data processing
[Tidy 20:24:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:24:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:24:09 INFO] resetting WatchDogTimer
[Status 20:24:09 INFO] Starting Set [AERI set: name H362, 6 scans, 60 angle, D22500 command]
[Ingest 20:24:09 INFO] Sending XML status message
[Status 20:24:09 INFO] Mirror angle: 60
[Mirror 20:24:10 INFO] rotating to position H
[Status 20:24:11 INFO] .SET file for ACQ96 ready
[Ingest 20:24:11 INFO] Starting acquisition
[Status 20:24:12 INFO] reading housekeeping
[Status 20:24:29 INFO] acquire complete
[Status 20:24:30 INFO] writing housekeeping
[Sequencer 20:24:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:24:30 INFO] incremented H scene to 362 completed views
[Sequencer 20:24:30 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:24:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:24:30 INFO] incremented to [AERI set: name S362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:24:30 INFO] H362.SIG(18)
[sigmove 20:24:30 DEBUG] transformed H362Ma.SPC -> H362MA.SPC
[sigmove 20:24:30 DEBUG] transformed H362Mb.SPC -> H362MB.SPC
[sigmove 20:24:30 DEBUG] transformed H362Mc.SPC -> H362MC.SPC
[sigmove 20:24:30 DEBUG] transformed H362Md.SPC -> H362MD.SPC
[sigmove 20:24:30 DEBUG] transformed H362Me.SPC -> H362ME.SPC
[sigmove 20:24:30 DEBUG] transformed H362Mf.SPC -> H362MF.SPC
[Status 20:24:30 INFO] data for H362 transferred to science data processing
[Tidy 20:24:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:24:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:24:30 INFO] resetting WatchDogTimer
[Status 20:24:31 INFO] Starting Set [AERI set: name S362, 6 scans, 0 angle, D16300 command]
[Ingest 20:24:31 INFO] Sending XML status message
[Status 20:24:31 INFO] Mirror angle: 0
[Mirror 20:24:31 INFO] rotating to position S
[Status 20:24:32 INFO] .SET file for ACQ96 ready
[Ingest 20:24:33 INFO] Starting acquisition
[Status 20:24:33 INFO] reading housekeeping
[Status 20:24:50 INFO] acquire complete
[Status 20:24:52 INFO] writing housekeeping
[Sequencer 20:24:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:24:52 INFO] incremented S scene to 362 completed views
[Sequencer 20:24:52 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:24:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:24:52 INFO] incremented to [AERI set: name T362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:24:52 INFO] S362.SIG(18)
[sigmove 20:24:52 DEBUG] transformed S362Ma.SPC -> S362MA.SPC
[sigmove 20:24:52 DEBUG] transformed S362Mb.SPC -> S362MB.SPC
[sigmove 20:24:52 DEBUG] transformed S362Mc.SPC -> S362MC.SPC
[sigmove 20:24:52 DEBUG] transformed S362Md.SPC -> S362MD.SPC
[sigmove 20:24:52 DEBUG] transformed S362Me.SPC -> S362ME.SPC
[sigmove 20:24:52 DEBUG] transformed S362Mf.SPC -> S362MF.SPC
[Status 20:24:52 INFO] data for S362 transferred to science data processing
[Tidy 20:24:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:24:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:24:52 INFO] resetting WatchDogTimer
[Status 20:24:52 INFO] Starting Set [AERI set: name T362, 6 scans, 0 angle, D16300 command]
[Ingest 20:24:52 INFO] Sending XML status message
[Status 20:24:52 INFO] Mirror angle: 0
[Mirror 20:24:53 INFO] rotating to position T
[Status 20:24:53 INFO] .SET file for ACQ96 ready
[Ingest 20:24:53 INFO] Starting acquisition
[Status 20:24:54 INFO] reading housekeeping
[Status 20:25:12 INFO] acquire complete
[Status 20:25:13 INFO] writing housekeeping
[Sequencer 20:25:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:25:13 INFO] incremented T scene to 362 completed views
[Sequencer 20:25:13 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:25:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:25:13 INFO] incremented to [AERI set: name U362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:25:13 INFO] T362.SIG(18)
[sigmove 20:25:13 DEBUG] transformed T362Ma.SPC -> T362MA.SPC
[sigmove 20:25:13 DEBUG] transformed T362Mb.SPC -> T362MB.SPC
[sigmove 20:25:13 DEBUG] transformed T362Mc.SPC -> T362MC.SPC
[sigmove 20:25:13 DEBUG] transformed T362Md.SPC -> T362MD.SPC
[sigmove 20:25:13 DEBUG] transformed T362Me.SPC -> T362ME.SPC
[sigmove 20:25:13 DEBUG] transformed T362Mf.SPC -> T362MF.SPC
[Status 20:25:13 INFO] data for T362 transferred to science data processing
[Tidy 20:25:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:25:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:25:13 INFO] resetting WatchDogTimer
[Status 20:25:13 INFO] Starting Set [AERI set: name U362, 6 scans, 0 angle, D16300 command]
[Ingest 20:25:13 INFO] Sending XML status message
[Status 20:25:13 INFO] Mirror angle: 0
[Mirror 20:25:14 INFO] rotating to position U
[Status 20:25:14 INFO] .SET file for ACQ96 ready
[Ingest 20:25:15 INFO] Starting acquisition
[Status 20:25:15 INFO] reading housekeeping
[Status 20:25:33 INFO] acquire complete
[Status 20:25:34 INFO] writing housekeeping
[Sequencer 20:25:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:25:34 INFO] incremented U scene to 362 completed views
[Sequencer 20:25:34 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:25:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:25:34 INFO] incremented to [AERI set: name V362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:25:34 INFO] U362.SIG(18)
[sigmove 20:25:34 DEBUG] transformed U362Ma.SPC -> U362MA.SPC
[sigmove 20:25:34 DEBUG] transformed U362Mb.SPC -> U362MB.SPC
[sigmove 20:25:34 DEBUG] transformed U362Mc.SPC -> U362MC.SPC
[sigmove 20:25:34 DEBUG] transformed U362Md.SPC -> U362MD.SPC
[sigmove 20:25:34 DEBUG] transformed U362Me.SPC -> U362ME.SPC
[sigmove 20:25:34 DEBUG] transformed U362Mf.SPC -> U362MF.SPC
[Status 20:25:34 INFO] data for U362 transferred to science data processing
[Tidy 20:25:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:25:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:25:34 INFO] resetting WatchDogTimer
[Status 20:25:35 INFO] Starting Set [AERI set: name V362, 6 scans, 0 angle, D16300 command]
[Ingest 20:25:35 INFO] Sending XML status message
[Status 20:25:35 INFO] Mirror angle: 0
[Mirror 20:25:35 INFO] rotating to position V
[Status 20:25:36 INFO] .SET file for ACQ96 ready
[Ingest 20:25:36 INFO] Starting acquisition
[Status 20:25:37 INFO] reading housekeeping
[Status 20:25:54 INFO] acquire complete
[Status 20:25:56 INFO] writing housekeeping
[Sequencer 20:25:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:25:56 INFO] incremented V scene to 362 completed views
[Sequencer 20:25:56 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:25:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:25:56 INFO] incremented to [AERI set: name W362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:25:56 INFO] V362.SIG(18)
[sigmove 20:25:56 DEBUG] transformed V362Ma.SPC -> V362MA.SPC
[sigmove 20:25:56 DEBUG] transformed V362Mb.SPC -> V362MB.SPC
[sigmove 20:25:56 DEBUG] transformed V362Mc.SPC -> V362MC.SPC
[sigmove 20:25:56 DEBUG] transformed V362Md.SPC -> V362MD.SPC
[sigmove 20:25:56 DEBUG] transformed V362Me.SPC -> V362ME.SPC
[sigmove 20:25:56 DEBUG] transformed V362Mf.SPC -> V362MF.SPC
[Status 20:25:56 INFO] data for V362 transferred to science data processing
[Tidy 20:25:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:25:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:25:56 INFO] resetting WatchDogTimer
[Status 20:25:56 INFO] Starting Set [AERI set: name W362, 6 scans, 0 angle, D16300 command]
[Ingest 20:25:56 INFO] Sending XML status message
[Status 20:25:56 INFO] Mirror angle: 0
[Mirror 20:25:56 INFO] rotating to position W
[Status 20:25:57 INFO] .SET file for ACQ96 ready
[Ingest 20:25:57 INFO] Starting acquisition
[Status 20:25:58 INFO] reading housekeeping
[Status 20:26:16 INFO] acquire complete
[Status 20:26:17 INFO] writing housekeeping
[Sequencer 20:26:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:26:17 INFO] incremented W scene to 362 completed views
[Sequencer 20:26:17 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:26:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:26:17 INFO] incremented to [AERI set: name X362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:26:17 INFO] W362.SIG(18)
[sigmove 20:26:17 DEBUG] transformed W362Ma.SPC -> W362MA.SPC
[sigmove 20:26:17 DEBUG] transformed W362Mb.SPC -> W362MB.SPC
[sigmove 20:26:17 DEBUG] transformed W362Mc.SPC -> W362MC.SPC
[sigmove 20:26:17 DEBUG] transformed W362Md.SPC -> W362MD.SPC
[sigmove 20:26:17 DEBUG] transformed W362Me.SPC -> W362ME.SPC
[sigmove 20:26:17 DEBUG] transformed W362Mf.SPC -> W362MF.SPC
[Status 20:26:17 INFO] data for W362 transferred to science data processing
[Tidy 20:26:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:26:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:26:17 INFO] resetting WatchDogTimer
[Status 20:26:17 INFO] Starting Set [AERI set: name X362, 6 scans, 0 angle, D16300 command]
[Ingest 20:26:17 INFO] Sending XML status message
[Status 20:26:17 INFO] Mirror angle: 0
[Mirror 20:26:18 INFO] rotating to position X
[Status 20:26:18 INFO] .SET file for ACQ96 ready
[Ingest 20:26:19 INFO] Starting acquisition
[Status 20:26:19 INFO] reading housekeeping
[Status 20:26:37 INFO] acquire complete
[Status 20:26:38 INFO] writing housekeeping
[Sequencer 20:26:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:26:38 INFO] incremented X scene to 362 completed views
[Sequencer 20:26:38 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:26:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:26:38 INFO] incremented to [AERI set: name Y362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:26:38 INFO] X362.SIG(18)
[sigmove 20:26:38 DEBUG] transformed X362Ma.SPC -> X362MA.SPC
[sigmove 20:26:38 DEBUG] transformed X362Mb.SPC -> X362MB.SPC
[sigmove 20:26:38 DEBUG] transformed X362Mc.SPC -> X362MC.SPC
[sigmove 20:26:38 DEBUG] transformed X362Md.SPC -> X362MD.SPC
[sigmove 20:26:38 DEBUG] transformed X362Me.SPC -> X362ME.SPC
[sigmove 20:26:38 DEBUG] transformed X362Mf.SPC -> X362MF.SPC
[Status 20:26:38 INFO] data for X362 transferred to science data processing
[Tidy 20:26:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:26:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:26:38 INFO] resetting WatchDogTimer
[Status 20:26:39 INFO] Starting Set [AERI set: name Y362, 6 scans, 0 angle, D16300 command]
[Ingest 20:26:39 INFO] Sending XML status message
[Status 20:26:39 INFO] Mirror angle: 0
[Mirror 20:26:39 INFO] rotating to position Y
[Status 20:26:40 INFO] .SET file for ACQ96 ready
[Ingest 20:26:40 INFO] Starting acquisition
[Status 20:26:41 INFO] reading housekeeping
[Status 20:26:58 INFO] acquire complete
[Status 20:26:59 INFO] writing housekeeping
[Sequencer 20:26:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:26:59 INFO] incremented Y scene to 362 completed views
[Sequencer 20:26:59 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:26:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:26:59 INFO] incremented to [AERI set: name Z362, 6 scans, 0 angle, D16300 command] set
[sigmove 20:26:59 INFO] Y362.SIG(18)
[sigmove 20:26:59 DEBUG] transformed Y362Ma.SPC -> Y362MA.SPC
[sigmove 20:26:59 DEBUG] transformed Y362Mb.SPC -> Y362MB.SPC
[sigmove 20:26:59 DEBUG] transformed Y362Mc.SPC -> Y362MC.SPC
[sigmove 20:26:59 DEBUG] transformed Y362Md.SPC -> Y362MD.SPC
[sigmove 20:26:59 DEBUG] transformed Y362Me.SPC -> Y362ME.SPC
[sigmove 20:26:59 DEBUG] transformed Y362Mf.SPC -> Y362MF.SPC
[Status 20:26:59 INFO] data for Y362 transferred to science data processing
[Tidy 20:26:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:26:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:26:59 INFO] resetting WatchDogTimer
[Status 20:27:00 INFO] Starting Set [AERI set: name Z362, 6 scans, 0 angle, D16300 command]
[Ingest 20:27:00 INFO] Sending XML status message
[Status 20:27:00 INFO] Mirror angle: 0
[Mirror 20:27:00 INFO] rotating to position Z
[Status 20:27:01 INFO] .SET file for ACQ96 ready
[Ingest 20:27:01 INFO] Starting acquisition
[Status 20:27:02 INFO] reading housekeeping
[Status 20:27:20 INFO] acquire complete
[Status 20:27:21 INFO] writing housekeeping
[Sequencer 20:27:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:27:21 INFO] incremented Z scene to 362 completed views
[Sequencer 20:27:21 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:27:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:27:21 INFO] incremented to [AERI set: name H363, 6 scans, 60 angle, D22500 command] set
[sigmove 20:27:21 INFO] Z362.SIG(18)
[sigmove 20:27:21 DEBUG] transformed Z362Ma.SPC -> Z362MA.SPC
[sigmove 20:27:21 DEBUG] transformed Z362Mb.SPC -> Z362MB.SPC
[sigmove 20:27:21 DEBUG] transformed Z362Mc.SPC -> Z362MC.SPC
[sigmove 20:27:21 DEBUG] transformed Z362Md.SPC -> Z362MD.SPC
[sigmove 20:27:21 DEBUG] transformed Z362Me.SPC -> Z362ME.SPC
[sigmove 20:27:21 DEBUG] transformed Z362Mf.SPC -> Z362MF.SPC
[Status 20:27:21 INFO] data for Z362 transferred to science data processing
[Tidy 20:27:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:27:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:27:21 INFO] resetting WatchDogTimer
[Status 20:27:21 INFO] Starting Set [AERI set: name H363, 6 scans, 60 angle, D22500 command]
[Ingest 20:27:21 INFO] Sending XML status message
[Status 20:27:21 INFO] Mirror angle: 60
[Mirror 20:27:22 INFO] rotating to position H
[Status 20:27:23 INFO] .SET file for ACQ96 ready
[Ingest 20:27:23 INFO] Starting acquisition
[Status 20:27:24 INFO] reading housekeeping
[Status 20:27:41 INFO] acquire complete
[Status 20:27:42 INFO] writing housekeeping
[Sequencer 20:27:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:27:42 INFO] incremented H scene to 363 completed views
[Sequencer 20:27:42 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:27:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:27:42 INFO] incremented to [AERI set: name A363, 6 scans, 120 angle, D28300 command] set
[sigmove 20:27:42 INFO] H363.SIG(18)
[sigmove 20:27:42 DEBUG] transformed H363Ma.SPC -> H363MA.SPC
[sigmove 20:27:42 DEBUG] transformed H363Mb.SPC -> H363MB.SPC
[sigmove 20:27:42 DEBUG] transformed H363Mc.SPC -> H363MC.SPC
[sigmove 20:27:42 DEBUG] transformed H363Md.SPC -> H363MD.SPC
[sigmove 20:27:42 DEBUG] transformed H363Me.SPC -> H363ME.SPC
[sigmove 20:27:42 DEBUG] transformed H363Mf.SPC -> H363MF.SPC
[Status 20:27:42 INFO] data for H363 transferred to science data processing
[Tidy 20:27:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:27:42 INFO] A361.FIN(19),H361.FIN(19),S361.FIN(19),T361.FIN(19),U361.FIN(19),V361.FIN(19),W361.FIN(19),X361.FIN(19),Y361.FIN(19),Z361.FIN(19),A362.FIN(19),H362.FIN(19),S362.FIN(19),T362.FIN(19),U362.FIN(19),V362.FIN(19),W362.FIN(19),X362.FIN(19),Y362.FIN(19),Z362.FIN(19)
[sigmove 20:27:42 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:27:42 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:27:49 DEBUG] done zipping
[WatchDog 20:27:49 INFO] resetting WatchDogTimer
[Status 20:27:50 INFO] Starting Set [AERI set: name A363, 6 scans, 120 angle, D28300 command]
[Ingest 20:27:50 INFO] Sending XML status message
[Status 20:27:50 INFO] Mirror angle: 120
[Mirror 20:27:50 INFO] rotating to position A
[Status 20:27:51 INFO] .SET file for ACQ96 ready
[Ingest 20:27:52 INFO] Starting acquisition
[Status 20:27:52 INFO] reading housekeeping
[Status 20:28:10 INFO] acquire complete
[Status 20:28:11 INFO] writing housekeeping
[Sequencer 20:28:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:28:11 INFO] incremented A scene to 363 completed views
[Sequencer 20:28:11 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:28:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:28:11 INFO] incremented to [AERI set: name S363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:28:11 INFO] A363.SIG(18)
[sigmove 20:28:11 DEBUG] transformed A363Ma.SPC -> A363MA.SPC
[sigmove 20:28:11 DEBUG] transformed A363Mb.SPC -> A363MB.SPC
[sigmove 20:28:11 DEBUG] transformed A363Mc.SPC -> A363MC.SPC
[sigmove 20:28:11 DEBUG] transformed A363Md.SPC -> A363MD.SPC
[sigmove 20:28:11 DEBUG] transformed A363Me.SPC -> A363ME.SPC
[sigmove 20:28:11 DEBUG] transformed A363Mf.SPC -> A363MF.SPC
[Status 20:28:11 INFO] data for A363 transferred to science data processing
[Tidy 20:28:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:28:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:28:11 INFO] resetting WatchDogTimer
[Status 20:28:12 INFO] Starting Set [AERI set: name S363, 6 scans, 0 angle, D16300 command]
[Ingest 20:28:12 INFO] Sending XML status message
[Status 20:28:12 INFO] Mirror angle: 0
[Mirror 20:28:12 INFO] rotating to position S
[Status 20:28:14 INFO] .SET file for ACQ96 ready
[Ingest 20:28:14 INFO] Starting acquisition
[Status 20:28:15 INFO] reading housekeeping
[Status 20:28:32 INFO] acquire complete
[Status 20:28:34 INFO] writing housekeeping
[Sequencer 20:28:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:28:34 INFO] incremented S scene to 363 completed views
[Sequencer 20:28:34 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:28:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:28:34 INFO] incremented to [AERI set: name T363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:28:34 INFO] S363.SIG(18)
[sigmove 20:28:34 DEBUG] transformed S363Ma.SPC -> S363MA.SPC
[sigmove 20:28:34 DEBUG] transformed S363Mb.SPC -> S363MB.SPC
[sigmove 20:28:34 DEBUG] transformed S363Mc.SPC -> S363MC.SPC
[sigmove 20:28:34 DEBUG] transformed S363Md.SPC -> S363MD.SPC
[sigmove 20:28:34 DEBUG] transformed S363Me.SPC -> S363ME.SPC
[sigmove 20:28:34 DEBUG] transformed S363Mf.SPC -> S363MF.SPC
[Status 20:28:34 INFO] data for S363 transferred to science data processing
[Tidy 20:28:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:28:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:28:34 INFO] resetting WatchDogTimer
[Status 20:28:34 INFO] Starting Set [AERI set: name T363, 6 scans, 0 angle, D16300 command]
[Ingest 20:28:34 INFO] Sending XML status message
[Status 20:28:34 INFO] Mirror angle: 0
[Mirror 20:28:35 INFO] rotating to position T
[Status 20:28:35 INFO] .SET file for ACQ96 ready
[Ingest 20:28:36 INFO] Starting acquisition
[Status 20:28:36 INFO] reading housekeeping
[Status 20:28:54 INFO] acquire complete
[Status 20:28:55 INFO] writing housekeeping
[Sequencer 20:28:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:28:55 INFO] incremented T scene to 363 completed views
[Sequencer 20:28:55 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:28:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:28:55 INFO] incremented to [AERI set: name U363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:28:55 INFO] T363.SIG(18)
[sigmove 20:28:55 DEBUG] transformed T363Ma.SPC -> T363MA.SPC
[sigmove 20:28:55 DEBUG] transformed T363Mb.SPC -> T363MB.SPC
[sigmove 20:28:55 DEBUG] transformed T363Mc.SPC -> T363MC.SPC
[sigmove 20:28:55 DEBUG] transformed T363Md.SPC -> T363MD.SPC
[sigmove 20:28:55 DEBUG] transformed T363Me.SPC -> T363ME.SPC
[sigmove 20:28:55 DEBUG] transformed T363Mf.SPC -> T363MF.SPC
[Status 20:28:55 INFO] data for T363 transferred to science data processing
[Tidy 20:28:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:28:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:28:55 INFO] resetting WatchDogTimer
[Status 20:28:56 INFO] Starting Set [AERI set: name U363, 6 scans, 0 angle, D16300 command]
[Ingest 20:28:56 INFO] Sending XML status message
[Status 20:28:56 INFO] Mirror angle: 0
[Mirror 20:28:56 INFO] rotating to position U
[Status 20:28:57 INFO] .SET file for ACQ96 ready
[Ingest 20:28:57 INFO] Starting acquisition
[Status 20:28:57 INFO] reading housekeeping
[Status 20:29:15 INFO] acquire complete
[Status 20:29:16 INFO] writing housekeeping
[Sequencer 20:29:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:29:16 INFO] incremented U scene to 363 completed views
[Sequencer 20:29:16 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:29:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:29:16 INFO] incremented to [AERI set: name V363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:29:16 INFO] U363.SIG(18)
[sigmove 20:29:16 DEBUG] transformed U363Ma.SPC -> U363MA.SPC
[sigmove 20:29:16 DEBUG] transformed U363Mb.SPC -> U363MB.SPC
[sigmove 20:29:16 DEBUG] transformed U363Mc.SPC -> U363MC.SPC
[sigmove 20:29:16 DEBUG] transformed U363Md.SPC -> U363MD.SPC
[sigmove 20:29:16 DEBUG] transformed U363Me.SPC -> U363ME.SPC
[sigmove 20:29:16 DEBUG] transformed U363Mf.SPC -> U363MF.SPC
[Status 20:29:16 INFO] data for U363 transferred to science data processing
[Tidy 20:29:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:29:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:29:16 INFO] resetting WatchDogTimer
[Status 20:29:17 INFO] Starting Set [AERI set: name V363, 6 scans, 0 angle, D16300 command]
[Ingest 20:29:17 INFO] Sending XML status message
[Status 20:29:17 INFO] Mirror angle: 0
[Mirror 20:29:17 INFO] rotating to position V
[Status 20:29:18 INFO] .SET file for ACQ96 ready
[Ingest 20:29:18 INFO] Starting acquisition
[Status 20:29:19 INFO] reading housekeeping
[Status 20:29:36 INFO] acquire complete
[Status 20:29:38 INFO] writing housekeeping
[Sequencer 20:29:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:29:38 INFO] incremented V scene to 363 completed views
[Sequencer 20:29:38 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:29:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:29:38 INFO] incremented to [AERI set: name W363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:29:38 INFO] V363.SIG(18)
[sigmove 20:29:38 DEBUG] transformed V363Ma.SPC -> V363MA.SPC
[sigmove 20:29:38 DEBUG] transformed V363Mb.SPC -> V363MB.SPC
[sigmove 20:29:38 DEBUG] transformed V363Mc.SPC -> V363MC.SPC
[sigmove 20:29:38 DEBUG] transformed V363Md.SPC -> V363MD.SPC
[sigmove 20:29:38 DEBUG] transformed V363Me.SPC -> V363ME.SPC
[sigmove 20:29:38 DEBUG] transformed V363Mf.SPC -> V363MF.SPC
[Status 20:29:38 INFO] data for V363 transferred to science data processing
[Tidy 20:29:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:29:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:29:38 INFO] resetting WatchDogTimer
[Status 20:29:38 INFO] Starting Set [AERI set: name W363, 6 scans, 0 angle, D16300 command]
[Ingest 20:29:38 INFO] Sending XML status message
[Status 20:29:38 INFO] Mirror angle: 0
[Mirror 20:29:39 INFO] rotating to position W
[Status 20:29:39 INFO] .SET file for ACQ96 ready
[Ingest 20:29:39 INFO] Starting acquisition
[Status 20:29:40 INFO] reading housekeeping
[Status 20:29:58 INFO] acquire complete
[Status 20:29:59 INFO] writing housekeeping
[Sequencer 20:29:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:29:59 INFO] incremented W scene to 363 completed views
[Sequencer 20:29:59 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:29:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:29:59 INFO] incremented to [AERI set: name X363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:29:59 INFO] W363.SIG(18)
[sigmove 20:29:59 DEBUG] transformed W363Ma.SPC -> W363MA.SPC
[sigmove 20:29:59 DEBUG] transformed W363Mb.SPC -> W363MB.SPC
[sigmove 20:29:59 DEBUG] transformed W363Mc.SPC -> W363MC.SPC
[sigmove 20:29:59 DEBUG] transformed W363Md.SPC -> W363MD.SPC
[sigmove 20:29:59 DEBUG] transformed W363Me.SPC -> W363ME.SPC
[sigmove 20:29:59 DEBUG] transformed W363Mf.SPC -> W363MF.SPC
[Status 20:29:59 INFO] data for W363 transferred to science data processing
[Tidy 20:29:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:29:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:29:59 INFO] resetting WatchDogTimer
[Status 20:29:59 INFO] Starting Set [AERI set: name X363, 6 scans, 0 angle, D16300 command]
[Ingest 20:29:59 INFO] Sending XML status message
[Status 20:29:59 INFO] Mirror angle: 0
[Mirror 20:30:00 INFO] rotating to position X
[Status 20:30:00 INFO] .SET file for ACQ96 ready
[Ingest 20:30:01 INFO] Starting acquisition
[Status 20:30:01 INFO] reading housekeeping
[Status 20:30:19 INFO] acquire complete
[Status 20:30:20 INFO] writing housekeeping
[Sequencer 20:30:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:30:20 INFO] incremented X scene to 363 completed views
[Sequencer 20:30:20 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:30:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:30:20 INFO] incremented to [AERI set: name Y363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:30:20 INFO] X363.SIG(18)
[sigmove 20:30:20 DEBUG] transformed X363Ma.SPC -> X363MA.SPC
[sigmove 20:30:20 DEBUG] transformed X363Mb.SPC -> X363MB.SPC
[sigmove 20:30:20 DEBUG] transformed X363Mc.SPC -> X363MC.SPC
[sigmove 20:30:20 DEBUG] transformed X363Md.SPC -> X363MD.SPC
[sigmove 20:30:20 DEBUG] transformed X363Me.SPC -> X363ME.SPC
[sigmove 20:30:20 DEBUG] transformed X363Mf.SPC -> X363MF.SPC
[Status 20:30:20 INFO] data for X363 transferred to science data processing
[Tidy 20:30:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:30:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:30:20 INFO] resetting WatchDogTimer
[Status 20:30:21 INFO] Starting Set [AERI set: name Y363, 6 scans, 0 angle, D16300 command]
[Ingest 20:30:21 INFO] Sending XML status message
[Status 20:30:21 INFO] Mirror angle: 0
[Mirror 20:30:21 INFO] rotating to position Y
[Status 20:30:22 INFO] .SET file for ACQ96 ready
[Ingest 20:30:22 INFO] Starting acquisition
[Status 20:30:23 INFO] reading housekeeping
[Status 20:30:40 INFO] acquire complete
[Status 20:30:42 INFO] writing housekeeping
[Sequencer 20:30:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:30:42 INFO] incremented Y scene to 363 completed views
[Sequencer 20:30:42 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:30:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:30:42 INFO] incremented to [AERI set: name Z363, 6 scans, 0 angle, D16300 command] set
[sigmove 20:30:42 INFO] Y363.SIG(18)
[sigmove 20:30:42 DEBUG] transformed Y363Ma.SPC -> Y363MA.SPC
[sigmove 20:30:42 DEBUG] transformed Y363Mb.SPC -> Y363MB.SPC
[sigmove 20:30:42 DEBUG] transformed Y363Mc.SPC -> Y363MC.SPC
[sigmove 20:30:42 DEBUG] transformed Y363Md.SPC -> Y363MD.SPC
[sigmove 20:30:42 DEBUG] transformed Y363Me.SPC -> Y363ME.SPC
[sigmove 20:30:42 DEBUG] transformed Y363Mf.SPC -> Y363MF.SPC
[Status 20:30:42 INFO] data for Y363 transferred to science data processing
[Tidy 20:30:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:30:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:30:42 INFO] resetting WatchDogTimer
[Status 20:30:42 INFO] Starting Set [AERI set: name Z363, 6 scans, 0 angle, D16300 command]
[Ingest 20:30:42 INFO] Sending XML status message
[Status 20:30:42 INFO] Mirror angle: 0
[Mirror 20:30:42 INFO] rotating to position Z
[Status 20:30:43 INFO] .SET file for ACQ96 ready
[Ingest 20:30:43 INFO] Starting acquisition
[Status 20:30:44 INFO] reading housekeeping
[Status 20:31:02 INFO] acquire complete
[Status 20:31:03 INFO] writing housekeeping
[Sequencer 20:31:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:31:03 INFO] incremented Z scene to 363 completed views
[Sequencer 20:31:03 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:31:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:31:03 INFO] incremented to [AERI set: name A364, 6 scans, 120 angle, D28300 command] set
[sigmove 20:31:03 INFO] Z363.SIG(18)
[sigmove 20:31:03 DEBUG] transformed Z363Ma.SPC -> Z363MA.SPC
[sigmove 20:31:03 DEBUG] transformed Z363Mb.SPC -> Z363MB.SPC
[sigmove 20:31:03 DEBUG] transformed Z363Mc.SPC -> Z363MC.SPC
[sigmove 20:31:03 DEBUG] transformed Z363Md.SPC -> Z363MD.SPC
[sigmove 20:31:03 DEBUG] transformed Z363Me.SPC -> Z363ME.SPC
[sigmove 20:31:03 DEBUG] transformed Z363Mf.SPC -> Z363MF.SPC
[Status 20:31:03 INFO] data for Z363 transferred to science data processing
[Tidy 20:31:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:31:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:31:03 INFO] resetting WatchDogTimer
[Status 20:31:03 INFO] Starting Set [AERI set: name A364, 6 scans, 120 angle, D28300 command]
[Ingest 20:31:03 INFO] Sending XML status message
[Status 20:31:03 INFO] Mirror angle: 120
[Mirror 20:31:04 INFO] rotating to position A
[Status 20:31:05 INFO] .SET file for ACQ96 ready
[Ingest 20:31:06 INFO] Starting acquisition
[Status 20:31:06 INFO] reading housekeeping
[Status 20:31:24 INFO] acquire complete
[Status 20:31:25 INFO] writing housekeeping
[Sequencer 20:31:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:31:25 INFO] incremented A scene to 364 completed views
[Sequencer 20:31:25 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:31:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:31:25 INFO] incremented to [AERI set: name H364, 6 scans, 60 angle, D22500 command] set
[sigmove 20:31:25 INFO] A364.SIG(18)
[sigmove 20:31:25 DEBUG] transformed A364Ma.SPC -> A364MA.SPC
[sigmove 20:31:25 DEBUG] transformed A364Mb.SPC -> A364MB.SPC
[sigmove 20:31:25 DEBUG] transformed A364Mc.SPC -> A364MC.SPC
[sigmove 20:31:25 DEBUG] transformed A364Md.SPC -> A364MD.SPC
[sigmove 20:31:25 DEBUG] transformed A364Me.SPC -> A364ME.SPC
[sigmove 20:31:25 DEBUG] transformed A364Mf.SPC -> A364MF.SPC
[Status 20:31:25 INFO] data for A364 transferred to science data processing
[Tidy 20:31:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:31:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:31:25 INFO] resetting WatchDogTimer
[Status 20:31:26 INFO] Starting Set [AERI set: name H364, 6 scans, 60 angle, D22500 command]
[Ingest 20:31:26 INFO] Sending XML status message
[Status 20:31:26 INFO] Mirror angle: 60
[Mirror 20:31:26 INFO] rotating to position H
[Status 20:31:27 INFO] .SET file for ACQ96 ready
[Ingest 20:31:28 INFO] Starting acquisition
[Status 20:31:28 INFO] reading housekeeping
[Status 20:31:45 INFO] acquire complete
[Status 20:31:47 INFO] writing housekeeping
[Sequencer 20:31:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:31:47 INFO] incremented H scene to 364 completed views
[Sequencer 20:31:47 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:31:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:31:47 INFO] incremented to [AERI set: name S364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:31:47 INFO] H364.SIG(18)
[sigmove 20:31:47 DEBUG] transformed H364Ma.SPC -> H364MA.SPC
[sigmove 20:31:47 DEBUG] transformed H364Mb.SPC -> H364MB.SPC
[sigmove 20:31:47 DEBUG] transformed H364Mc.SPC -> H364MC.SPC
[sigmove 20:31:47 DEBUG] transformed H364Md.SPC -> H364MD.SPC
[sigmove 20:31:47 DEBUG] transformed H364Me.SPC -> H364ME.SPC
[sigmove 20:31:47 DEBUG] transformed H364Mf.SPC -> H364MF.SPC
[Status 20:31:47 INFO] data for H364 transferred to science data processing
[Tidy 20:31:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:31:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:31:47 INFO] resetting WatchDogTimer
[Status 20:31:47 INFO] Starting Set [AERI set: name S364, 6 scans, 0 angle, D16300 command]
[Ingest 20:31:47 INFO] Sending XML status message
[Status 20:31:47 INFO] Mirror angle: 0
[Mirror 20:31:47 INFO] rotating to position S
[Status 20:31:49 INFO] .SET file for ACQ96 ready
[Ingest 20:31:49 INFO] Starting acquisition
[Status 20:31:49 INFO] reading housekeeping
[Status 20:32:07 INFO] acquire complete
[Status 20:32:08 INFO] writing housekeeping
[Sequencer 20:32:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:32:08 INFO] incremented S scene to 364 completed views
[Sequencer 20:32:08 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:32:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:32:08 INFO] incremented to [AERI set: name T364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:32:08 INFO] S364.SIG(18)
[sigmove 20:32:08 DEBUG] transformed S364Ma.SPC -> S364MA.SPC
[sigmove 20:32:08 DEBUG] transformed S364Mb.SPC -> S364MB.SPC
[sigmove 20:32:08 DEBUG] transformed S364Mc.SPC -> S364MC.SPC
[sigmove 20:32:08 DEBUG] transformed S364Md.SPC -> S364MD.SPC
[sigmove 20:32:08 DEBUG] transformed S364Me.SPC -> S364ME.SPC
[sigmove 20:32:08 DEBUG] transformed S364Mf.SPC -> S364MF.SPC
[Status 20:32:08 INFO] data for S364 transferred to science data processing
[Tidy 20:32:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:32:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:32:08 INFO] resetting WatchDogTimer
[Status 20:32:09 INFO] Starting Set [AERI set: name T364, 6 scans, 0 angle, D16300 command]
[Ingest 20:32:09 INFO] Sending XML status message
[Status 20:32:09 INFO] Mirror angle: 0
[Mirror 20:32:09 INFO] rotating to position T
[Status 20:32:10 INFO] .SET file for ACQ96 ready
[Ingest 20:32:10 INFO] Starting acquisition
[Status 20:32:11 INFO] reading housekeeping
[Status 20:32:28 INFO] acquire complete
[Status 20:32:29 INFO] writing housekeeping
[Sequencer 20:32:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:32:29 INFO] incremented T scene to 364 completed views
[Sequencer 20:32:29 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:32:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:32:29 INFO] incremented to [AERI set: name U364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:32:29 INFO] T364.SIG(18)
[sigmove 20:32:29 DEBUG] transformed T364Ma.SPC -> T364MA.SPC
[sigmove 20:32:29 DEBUG] transformed T364Mb.SPC -> T364MB.SPC
[sigmove 20:32:29 DEBUG] transformed T364Mc.SPC -> T364MC.SPC
[sigmove 20:32:29 DEBUG] transformed T364Md.SPC -> T364MD.SPC
[sigmove 20:32:29 DEBUG] transformed T364Me.SPC -> T364ME.SPC
[sigmove 20:32:29 DEBUG] transformed T364Mf.SPC -> T364MF.SPC
[Status 20:32:29 INFO] data for T364 transferred to science data processing
[Tidy 20:32:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:32:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:32:29 INFO] resetting WatchDogTimer
[Status 20:32:30 INFO] Starting Set [AERI set: name U364, 6 scans, 0 angle, D16300 command]
[Ingest 20:32:30 INFO] Sending XML status message
[Status 20:32:30 INFO] Mirror angle: 0
[Mirror 20:32:30 INFO] rotating to position U
[Status 20:32:31 INFO] .SET file for ACQ96 ready
[Ingest 20:32:31 INFO] Starting acquisition
[Status 20:32:32 INFO] reading housekeeping
[Status 20:32:49 INFO] acquire complete
[Status 20:32:51 INFO] writing housekeeping
[Sequencer 20:32:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:32:51 INFO] incremented U scene to 364 completed views
[Sequencer 20:32:51 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:32:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:32:51 INFO] incremented to [AERI set: name V364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:32:51 INFO] U364.SIG(18)
[sigmove 20:32:51 DEBUG] transformed U364Ma.SPC -> U364MA.SPC
[sigmove 20:32:51 DEBUG] transformed U364Mb.SPC -> U364MB.SPC
[sigmove 20:32:51 DEBUG] transformed U364Mc.SPC -> U364MC.SPC
[sigmove 20:32:51 DEBUG] transformed U364Md.SPC -> U364MD.SPC
[sigmove 20:32:51 DEBUG] transformed U364Me.SPC -> U364ME.SPC
[sigmove 20:32:51 DEBUG] transformed U364Mf.SPC -> U364MF.SPC
[Status 20:32:51 INFO] data for U364 transferred to science data processing
[Tidy 20:32:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:32:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:32:51 INFO] resetting WatchDogTimer
[Status 20:32:51 INFO] Starting Set [AERI set: name V364, 6 scans, 0 angle, D16300 command]
[Ingest 20:32:51 INFO] Sending XML status message
[Status 20:32:51 INFO] Mirror angle: 0
[Mirror 20:32:52 INFO] rotating to position V
[Status 20:32:52 INFO] .SET file for ACQ96 ready
[Ingest 20:32:52 INFO] Starting acquisition
[Status 20:32:53 INFO] reading housekeeping
[Status 20:33:11 INFO] acquire complete
[Status 20:33:12 INFO] writing housekeeping
[Sequencer 20:33:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:33:12 INFO] incremented V scene to 364 completed views
[Sequencer 20:33:12 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:33:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:33:12 INFO] incremented to [AERI set: name W364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:33:12 INFO] V364.SIG(18)
[sigmove 20:33:12 DEBUG] transformed V364Ma.SPC -> V364MA.SPC
[sigmove 20:33:12 DEBUG] transformed V364Mb.SPC -> V364MB.SPC
[sigmove 20:33:12 DEBUG] transformed V364Mc.SPC -> V364MC.SPC
[sigmove 20:33:12 DEBUG] transformed V364Md.SPC -> V364MD.SPC
[sigmove 20:33:12 DEBUG] transformed V364Me.SPC -> V364ME.SPC
[sigmove 20:33:12 DEBUG] transformed V364Mf.SPC -> V364MF.SPC
[Status 20:33:12 INFO] data for V364 transferred to science data processing
[Tidy 20:33:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:33:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:33:12 INFO] resetting WatchDogTimer
[Status 20:33:12 INFO] Starting Set [AERI set: name W364, 6 scans, 0 angle, D16300 command]
[Ingest 20:33:12 INFO] Sending XML status message
[Status 20:33:12 INFO] Mirror angle: 0
[Mirror 20:33:13 INFO] rotating to position W
[Status 20:33:13 INFO] .SET file for ACQ96 ready
[Ingest 20:33:14 INFO] Starting acquisition
[Status 20:33:14 INFO] reading housekeeping
[Status 20:33:32 INFO] acquire complete
[Status 20:33:33 INFO] writing housekeeping
[Sequencer 20:33:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:33:33 INFO] incremented W scene to 364 completed views
[Sequencer 20:33:33 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:33:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:33:33 INFO] incremented to [AERI set: name X364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:33:33 INFO] W364.SIG(18)
[sigmove 20:33:33 DEBUG] transformed W364Ma.SPC -> W364MA.SPC
[sigmove 20:33:33 DEBUG] transformed W364Mb.SPC -> W364MB.SPC
[sigmove 20:33:33 DEBUG] transformed W364Mc.SPC -> W364MC.SPC
[sigmove 20:33:33 DEBUG] transformed W364Md.SPC -> W364MD.SPC
[sigmove 20:33:33 DEBUG] transformed W364Me.SPC -> W364ME.SPC
[sigmove 20:33:33 DEBUG] transformed W364Mf.SPC -> W364MF.SPC
[Status 20:33:33 INFO] data for W364 transferred to science data processing
[Tidy 20:33:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:33:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:33:33 INFO] resetting WatchDogTimer
[Status 20:33:34 INFO] Starting Set [AERI set: name X364, 6 scans, 0 angle, D16300 command]
[Ingest 20:33:34 INFO] Sending XML status message
[Status 20:33:34 INFO] Mirror angle: 0
[Mirror 20:33:34 INFO] rotating to position X
[Status 20:33:35 INFO] .SET file for ACQ96 ready
[Ingest 20:33:35 INFO] Starting acquisition
[Status 20:33:36 INFO] reading housekeeping
[Status 20:33:53 INFO] acquire complete
[Status 20:33:54 INFO] writing housekeeping
[Sequencer 20:33:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:33:54 INFO] incremented X scene to 364 completed views
[Sequencer 20:33:54 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:33:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:33:54 INFO] incremented to [AERI set: name Y364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:33:54 INFO] X364.SIG(18)
[sigmove 20:33:54 DEBUG] transformed X364Ma.SPC -> X364MA.SPC
[sigmove 20:33:54 DEBUG] transformed X364Mb.SPC -> X364MB.SPC
[sigmove 20:33:54 DEBUG] transformed X364Mc.SPC -> X364MC.SPC
[sigmove 20:33:54 DEBUG] transformed X364Md.SPC -> X364MD.SPC
[sigmove 20:33:54 DEBUG] transformed X364Me.SPC -> X364ME.SPC
[sigmove 20:33:54 DEBUG] transformed X364Mf.SPC -> X364MF.SPC
[Status 20:33:54 INFO] data for X364 transferred to science data processing
[Tidy 20:33:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:33:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:33:54 INFO] resetting WatchDogTimer
[Status 20:33:55 INFO] Starting Set [AERI set: name Y364, 6 scans, 0 angle, D16300 command]
[Ingest 20:33:55 INFO] Sending XML status message
[Status 20:33:55 INFO] Mirror angle: 0
[Mirror 20:33:55 INFO] rotating to position Y
[Status 20:33:56 INFO] .SET file for ACQ96 ready
[Ingest 20:33:56 INFO] Starting acquisition
[Status 20:33:57 INFO] reading housekeeping
[Status 20:34:15 INFO] acquire complete
[Status 20:34:16 INFO] writing housekeeping
[Sequencer 20:34:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:34:16 INFO] incremented Y scene to 364 completed views
[Sequencer 20:34:16 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:34:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:34:16 INFO] incremented to [AERI set: name Z364, 6 scans, 0 angle, D16300 command] set
[sigmove 20:34:16 INFO] Y364.SIG(18)
[sigmove 20:34:16 DEBUG] transformed Y364Ma.SPC -> Y364MA.SPC
[sigmove 20:34:16 DEBUG] transformed Y364Mb.SPC -> Y364MB.SPC
[sigmove 20:34:16 DEBUG] transformed Y364Mc.SPC -> Y364MC.SPC
[sigmove 20:34:16 DEBUG] transformed Y364Md.SPC -> Y364MD.SPC
[sigmove 20:34:16 DEBUG] transformed Y364Me.SPC -> Y364ME.SPC
[sigmove 20:34:16 DEBUG] transformed Y364Mf.SPC -> Y364MF.SPC
[Status 20:34:16 INFO] data for Y364 transferred to science data processing
[Tidy 20:34:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:34:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:34:16 INFO] resetting WatchDogTimer
[Status 20:34:16 INFO] Starting Set [AERI set: name Z364, 6 scans, 0 angle, D16300 command]
[Ingest 20:34:16 INFO] Sending XML status message
[Status 20:34:16 INFO] Mirror angle: 0
[Mirror 20:34:17 INFO] rotating to position Z
[Status 20:34:17 INFO] .SET file for ACQ96 ready
[Ingest 20:34:18 INFO] Starting acquisition
[Status 20:34:18 INFO] reading housekeeping
[Status 20:34:36 INFO] acquire complete
[Status 20:34:37 INFO] writing housekeeping
[Sequencer 20:34:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:34:37 INFO] incremented Z scene to 364 completed views
[Sequencer 20:34:37 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:34:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:34:37 INFO] incremented to [AERI set: name H365, 6 scans, 60 angle, D22500 command] set
[sigmove 20:34:37 INFO] Z364.SIG(18)
[sigmove 20:34:37 DEBUG] transformed Z364Ma.SPC -> Z364MA.SPC
[sigmove 20:34:37 DEBUG] transformed Z364Mb.SPC -> Z364MB.SPC
[sigmove 20:34:37 DEBUG] transformed Z364Mc.SPC -> Z364MC.SPC
[sigmove 20:34:37 DEBUG] transformed Z364Md.SPC -> Z364MD.SPC
[sigmove 20:34:37 DEBUG] transformed Z364Me.SPC -> Z364ME.SPC
[sigmove 20:34:37 DEBUG] transformed Z364Mf.SPC -> Z364MF.SPC
[Status 20:34:37 INFO] data for Z364 transferred to science data processing
[Tidy 20:34:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:34:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:34:37 INFO] resetting WatchDogTimer
[Status 20:34:37 INFO] Starting Set [AERI set: name H365, 6 scans, 60 angle, D22500 command]
[Ingest 20:34:37 INFO] Sending XML status message
[Status 20:34:37 INFO] Mirror angle: 60
[Mirror 20:34:38 INFO] rotating to position H
[Status 20:34:39 INFO] .SET file for ACQ96 ready
[Ingest 20:34:39 INFO] Starting acquisition
[Status 20:34:40 INFO] reading housekeeping
[Status 20:34:57 INFO] acquire complete
[Status 20:34:58 INFO] writing housekeeping
[Sequencer 20:34:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:34:58 INFO] incremented H scene to 365 completed views
[Sequencer 20:34:58 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:34:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:34:58 INFO] incremented to [AERI set: name A365, 6 scans, 120 angle, D28300 command] set
[sigmove 20:34:58 INFO] H365.SIG(18)
[sigmove 20:34:58 DEBUG] transformed H365Ma.SPC -> H365MA.SPC
[sigmove 20:34:58 DEBUG] transformed H365Mb.SPC -> H365MB.SPC
[sigmove 20:34:58 DEBUG] transformed H365Mc.SPC -> H365MC.SPC
[sigmove 20:34:58 DEBUG] transformed H365Md.SPC -> H365MD.SPC
[sigmove 20:34:58 DEBUG] transformed H365Me.SPC -> H365ME.SPC
[sigmove 20:34:58 DEBUG] transformed H365Mf.SPC -> H365MF.SPC
[Status 20:34:58 INFO] data for H365 transferred to science data processing
[Tidy 20:34:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:34:58 INFO] A363.FIN(19),H363.FIN(19),S363.FIN(19),T363.FIN(19),U363.FIN(19),V363.FIN(19),W363.FIN(19),X363.FIN(19),Y363.FIN(19),Z363.FIN(19),A364.FIN(19),H364.FIN(19),S364.FIN(19),T364.FIN(19),U364.FIN(19),V364.FIN(19),W364.FIN(19),X364.FIN(19),Y364.FIN(19),Z364.FIN(19)
[sigmove 20:34:58 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:34:58 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:35:05 DEBUG] done zipping
[WatchDog 20:35:05 INFO] resetting WatchDogTimer
[Status 20:35:06 INFO] Starting Set [AERI set: name A365, 6 scans, 120 angle, D28300 command]
[Ingest 20:35:06 INFO] Sending XML status message
[Status 20:35:06 INFO] Mirror angle: 120
[Mirror 20:35:06 INFO] rotating to position A
[Status 20:35:07 INFO] .SET file for ACQ96 ready
[Ingest 20:35:08 INFO] Starting acquisition
[Status 20:35:08 INFO] reading housekeeping
[Status 20:35:26 INFO] acquire complete
[Status 20:35:28 INFO] writing housekeeping
[Sequencer 20:35:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:35:28 INFO] incremented A scene to 365 completed views
[Sequencer 20:35:28 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:35:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:35:28 INFO] incremented to [AERI set: name S365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:35:28 INFO] A365.SIG(18)
[sigmove 20:35:28 DEBUG] transformed A365Ma.SPC -> A365MA.SPC
[sigmove 20:35:28 DEBUG] transformed A365Mb.SPC -> A365MB.SPC
[sigmove 20:35:28 DEBUG] transformed A365Mc.SPC -> A365MC.SPC
[sigmove 20:35:28 DEBUG] transformed A365Md.SPC -> A365MD.SPC
[sigmove 20:35:28 DEBUG] transformed A365Me.SPC -> A365ME.SPC
[sigmove 20:35:28 DEBUG] transformed A365Mf.SPC -> A365MF.SPC
[Status 20:35:28 INFO] data for A365 transferred to science data processing
[Tidy 20:35:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:35:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:35:28 INFO] resetting WatchDogTimer
[Status 20:35:28 INFO] Starting Set [AERI set: name S365, 6 scans, 0 angle, D16300 command]
[Ingest 20:35:28 INFO] Sending XML status message
[Status 20:35:28 INFO] Mirror angle: 0
[Mirror 20:35:28 INFO] rotating to position S
[Status 20:35:30 INFO] .SET file for ACQ96 ready
[Ingest 20:35:30 INFO] Starting acquisition
[Status 20:35:31 INFO] reading housekeeping
[Status 20:35:49 INFO] acquire complete
[Status 20:35:50 INFO] writing housekeeping
[Sequencer 20:35:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:35:50 INFO] incremented S scene to 365 completed views
[Sequencer 20:35:50 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:35:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:35:50 INFO] incremented to [AERI set: name T365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:35:50 INFO] S365.SIG(18)
[sigmove 20:35:50 DEBUG] transformed S365Ma.SPC -> S365MA.SPC
[sigmove 20:35:50 DEBUG] transformed S365Mb.SPC -> S365MB.SPC
[sigmove 20:35:50 DEBUG] transformed S365Mc.SPC -> S365MC.SPC
[sigmove 20:35:50 DEBUG] transformed S365Md.SPC -> S365MD.SPC
[sigmove 20:35:50 DEBUG] transformed S365Me.SPC -> S365ME.SPC
[sigmove 20:35:50 DEBUG] transformed S365Mf.SPC -> S365MF.SPC
[Status 20:35:50 INFO] data for S365 transferred to science data processing
[Tidy 20:35:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:35:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:35:50 INFO] resetting WatchDogTimer
[Status 20:35:50 INFO] Starting Set [AERI set: name T365, 6 scans, 0 angle, D16300 command]
[Ingest 20:35:50 INFO] Sending XML status message
[Status 20:35:50 INFO] Mirror angle: 0
[Mirror 20:35:51 INFO] rotating to position T
[Status 20:35:52 INFO] .SET file for ACQ96 ready
[Ingest 20:35:52 INFO] Starting acquisition
[Status 20:35:52 INFO] reading housekeeping
[Status 20:36:10 INFO] acquire complete
[Status 20:36:11 INFO] writing housekeeping
[Sequencer 20:36:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:36:11 INFO] incremented T scene to 365 completed views
[Sequencer 20:36:11 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:36:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:36:11 INFO] incremented to [AERI set: name U365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:36:11 INFO] T365.SIG(18)
[sigmove 20:36:11 DEBUG] transformed T365Ma.SPC -> T365MA.SPC
[sigmove 20:36:11 DEBUG] transformed T365Mb.SPC -> T365MB.SPC
[sigmove 20:36:11 DEBUG] transformed T365Mc.SPC -> T365MC.SPC
[sigmove 20:36:11 DEBUG] transformed T365Md.SPC -> T365MD.SPC
[sigmove 20:36:11 DEBUG] transformed T365Me.SPC -> T365ME.SPC
[sigmove 20:36:11 DEBUG] transformed T365Mf.SPC -> T365MF.SPC
[Status 20:36:11 INFO] data for T365 transferred to science data processing
[Tidy 20:36:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:36:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:36:11 INFO] resetting WatchDogTimer
[Status 20:36:12 INFO] Starting Set [AERI set: name U365, 6 scans, 0 angle, D16300 command]
[Ingest 20:36:12 INFO] Sending XML status message
[Status 20:36:12 INFO] Mirror angle: 0
[Mirror 20:36:12 INFO] rotating to position U
[Status 20:36:13 INFO] .SET file for ACQ96 ready
[Ingest 20:36:13 INFO] Starting acquisition
[Status 20:36:14 INFO] reading housekeeping
[Status 20:36:31 INFO] acquire complete
[Status 20:36:33 INFO] writing housekeeping
[Sequencer 20:36:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:36:33 INFO] incremented U scene to 365 completed views
[Sequencer 20:36:33 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:36:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:36:33 INFO] incremented to [AERI set: name V365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:36:33 INFO] U365.SIG(18)
[sigmove 20:36:33 DEBUG] transformed U365Ma.SPC -> U365MA.SPC
[sigmove 20:36:33 DEBUG] transformed U365Mb.SPC -> U365MB.SPC
[sigmove 20:36:33 DEBUG] transformed U365Mc.SPC -> U365MC.SPC
[sigmove 20:36:33 DEBUG] transformed U365Md.SPC -> U365MD.SPC
[sigmove 20:36:33 DEBUG] transformed U365Me.SPC -> U365ME.SPC
[sigmove 20:36:33 DEBUG] transformed U365Mf.SPC -> U365MF.SPC
[Status 20:36:33 INFO] data for U365 transferred to science data processing
[Tidy 20:36:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:36:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:36:33 INFO] resetting WatchDogTimer
[Status 20:36:33 INFO] Starting Set [AERI set: name V365, 6 scans, 0 angle, D16300 command]
[Ingest 20:36:33 INFO] Sending XML status message
[Status 20:36:33 INFO] Mirror angle: 0
[Mirror 20:36:34 INFO] rotating to position V
[Status 20:36:34 INFO] .SET file for ACQ96 ready
[Ingest 20:36:35 INFO] Starting acquisition
[Status 20:36:37 INFO] reading housekeeping
[Status 20:36:54 INFO] acquire complete
[Status 20:36:55 INFO] writing housekeeping
[Sequencer 20:36:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:36:55 INFO] incremented V scene to 365 completed views
[Sequencer 20:36:55 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:36:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:36:55 INFO] incremented to [AERI set: name W365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:36:55 INFO] V365.SIG(18)
[sigmove 20:36:55 DEBUG] transformed V365Ma.SPC -> V365MA.SPC
[sigmove 20:36:55 DEBUG] transformed V365Mb.SPC -> V365MB.SPC
[sigmove 20:36:55 DEBUG] transformed V365Mc.SPC -> V365MC.SPC
[sigmove 20:36:55 DEBUG] transformed V365Md.SPC -> V365MD.SPC
[sigmove 20:36:55 DEBUG] transformed V365Me.SPC -> V365ME.SPC
[sigmove 20:36:55 DEBUG] transformed V365Mf.SPC -> V365MF.SPC
[Status 20:36:55 INFO] data for V365 transferred to science data processing
[Tidy 20:36:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:36:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:36:55 INFO] resetting WatchDogTimer
[Status 20:36:55 INFO] Starting Set [AERI set: name W365, 6 scans, 0 angle, D16300 command]
[Ingest 20:36:55 INFO] Sending XML status message
[Status 20:36:55 INFO] Mirror angle: 0
[Mirror 20:36:56 INFO] rotating to position W
[Status 20:36:56 INFO] .SET file for ACQ96 ready
[Ingest 20:36:57 INFO] Starting acquisition
[Status 20:36:57 INFO] reading housekeeping
[Status 20:37:15 INFO] acquire complete
[Status 20:37:16 INFO] writing housekeeping
[Sequencer 20:37:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:37:16 INFO] incremented W scene to 365 completed views
[Sequencer 20:37:16 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:37:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:37:16 INFO] incremented to [AERI set: name X365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:37:16 INFO] W365.SIG(18)
[sigmove 20:37:16 DEBUG] transformed W365Ma.SPC -> W365MA.SPC
[sigmove 20:37:16 DEBUG] transformed W365Mb.SPC -> W365MB.SPC
[sigmove 20:37:16 DEBUG] transformed W365Mc.SPC -> W365MC.SPC
[sigmove 20:37:16 DEBUG] transformed W365Md.SPC -> W365MD.SPC
[sigmove 20:37:16 DEBUG] transformed W365Me.SPC -> W365ME.SPC
[sigmove 20:37:16 DEBUG] transformed W365Mf.SPC -> W365MF.SPC
[Status 20:37:16 INFO] data for W365 transferred to science data processing
[Tidy 20:37:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:37:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:37:16 INFO] resetting WatchDogTimer
[Status 20:37:17 INFO] Starting Set [AERI set: name X365, 6 scans, 0 angle, D16300 command]
[Ingest 20:37:17 INFO] Sending XML status message
[Status 20:37:17 INFO] Mirror angle: 0
[Mirror 20:37:17 INFO] rotating to position X
[Status 20:37:18 INFO] .SET file for ACQ96 ready
[Ingest 20:37:18 INFO] Starting acquisition
[Status 20:37:19 INFO] reading housekeeping
[Status 20:37:36 INFO] acquire complete
[Status 20:37:38 INFO] writing housekeeping
[Sequencer 20:37:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:37:38 INFO] incremented X scene to 365 completed views
[Sequencer 20:37:38 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:37:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:37:38 INFO] incremented to [AERI set: name Y365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:37:38 INFO] X365.SIG(18)
[sigmove 20:37:38 DEBUG] transformed X365Ma.SPC -> X365MA.SPC
[sigmove 20:37:38 DEBUG] transformed X365Mb.SPC -> X365MB.SPC
[sigmove 20:37:38 DEBUG] transformed X365Mc.SPC -> X365MC.SPC
[sigmove 20:37:38 DEBUG] transformed X365Md.SPC -> X365MD.SPC
[sigmove 20:37:38 DEBUG] transformed X365Me.SPC -> X365ME.SPC
[sigmove 20:37:38 DEBUG] transformed X365Mf.SPC -> X365MF.SPC
[Status 20:37:38 INFO] data for X365 transferred to science data processing
[Tidy 20:37:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:37:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:37:38 INFO] resetting WatchDogTimer
[Status 20:37:38 INFO] Starting Set [AERI set: name Y365, 6 scans, 0 angle, D16300 command]
[Ingest 20:37:38 INFO] Sending XML status message
[Status 20:37:38 INFO] Mirror angle: 0
[Mirror 20:37:39 INFO] rotating to position Y
[Status 20:37:39 INFO] .SET file for ACQ96 ready
[Ingest 20:37:39 INFO] Starting acquisition
[Status 20:37:40 INFO] reading housekeeping
[Status 20:37:58 INFO] acquire complete
[Status 20:37:59 INFO] writing housekeeping
[Sequencer 20:37:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:37:59 INFO] incremented Y scene to 365 completed views
[Sequencer 20:37:59 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:37:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:37:59 INFO] incremented to [AERI set: name Z365, 6 scans, 0 angle, D16300 command] set
[sigmove 20:37:59 INFO] Y365.SIG(18)
[sigmove 20:37:59 DEBUG] transformed Y365Ma.SPC -> Y365MA.SPC
[sigmove 20:37:59 DEBUG] transformed Y365Mb.SPC -> Y365MB.SPC
[sigmove 20:37:59 DEBUG] transformed Y365Mc.SPC -> Y365MC.SPC
[sigmove 20:37:59 DEBUG] transformed Y365Md.SPC -> Y365MD.SPC
[sigmove 20:37:59 DEBUG] transformed Y365Me.SPC -> Y365ME.SPC
[sigmove 20:37:59 DEBUG] transformed Y365Mf.SPC -> Y365MF.SPC
[Status 20:37:59 INFO] data for Y365 transferred to science data processing
[Tidy 20:37:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:37:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:37:59 INFO] resetting WatchDogTimer
[Status 20:37:59 INFO] Starting Set [AERI set: name Z365, 6 scans, 0 angle, D16300 command]
[Ingest 20:37:59 INFO] Sending XML status message
[Status 20:37:59 INFO] Mirror angle: 0
[Mirror 20:38:00 INFO] rotating to position Z
[Status 20:38:00 INFO] .SET file for ACQ96 ready
[Ingest 20:38:01 INFO] Starting acquisition
[Status 20:38:01 INFO] reading housekeeping
[Status 20:38:19 INFO] acquire complete
[Status 20:38:20 INFO] writing housekeeping
[Sequencer 20:38:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:38:20 INFO] incremented Z scene to 365 completed views
[Sequencer 20:38:20 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:38:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:38:20 INFO] incremented to [AERI set: name A366, 6 scans, 120 angle, D28300 command] set
[sigmove 20:38:20 INFO] Z365.SIG(18)
[sigmove 20:38:20 DEBUG] transformed Z365Ma.SPC -> Z365MA.SPC
[sigmove 20:38:20 DEBUG] transformed Z365Mb.SPC -> Z365MB.SPC
[sigmove 20:38:20 DEBUG] transformed Z365Mc.SPC -> Z365MC.SPC
[sigmove 20:38:20 DEBUG] transformed Z365Md.SPC -> Z365MD.SPC
[sigmove 20:38:20 DEBUG] transformed Z365Me.SPC -> Z365ME.SPC
[sigmove 20:38:20 DEBUG] transformed Z365Mf.SPC -> Z365MF.SPC
[Status 20:38:20 INFO] data for Z365 transferred to science data processing
[Tidy 20:38:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:38:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:38:20 INFO] resetting WatchDogTimer
[Status 20:38:21 INFO] Starting Set [AERI set: name A366, 6 scans, 120 angle, D28300 command]
[Ingest 20:38:21 INFO] Sending XML status message
[Status 20:38:21 INFO] Mirror angle: 120
[Mirror 20:38:21 INFO] rotating to position A
[Status 20:38:23 INFO] .SET file for ACQ96 ready
[Ingest 20:38:23 INFO] Starting acquisition
[Status 20:38:24 INFO] reading housekeeping
[Status 20:38:42 INFO] acquire complete
[Status 20:38:43 INFO] writing housekeeping
[Sequencer 20:38:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:38:43 INFO] incremented A scene to 366 completed views
[Sequencer 20:38:43 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:38:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:38:43 INFO] incremented to [AERI set: name H366, 6 scans, 60 angle, D22500 command] set
[sigmove 20:38:43 INFO] A366.SIG(18)
[sigmove 20:38:43 DEBUG] transformed A366Ma.SPC -> A366MA.SPC
[sigmove 20:38:43 DEBUG] transformed A366Mb.SPC -> A366MB.SPC
[sigmove 20:38:43 DEBUG] transformed A366Mc.SPC -> A366MC.SPC
[sigmove 20:38:43 DEBUG] transformed A366Md.SPC -> A366MD.SPC
[sigmove 20:38:43 DEBUG] transformed A366Me.SPC -> A366ME.SPC
[sigmove 20:38:43 DEBUG] transformed A366Mf.SPC -> A366MF.SPC
[Status 20:38:43 INFO] data for A366 transferred to science data processing
[Tidy 20:38:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:38:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:38:43 INFO] resetting WatchDogTimer
[Status 20:38:43 INFO] Starting Set [AERI set: name H366, 6 scans, 60 angle, D22500 command]
[Ingest 20:38:43 INFO] Sending XML status message
[Status 20:38:43 INFO] Mirror angle: 60
[Mirror 20:38:44 INFO] rotating to position H
[Status 20:38:45 INFO] .SET file for ACQ96 ready
[Ingest 20:38:45 INFO] Starting acquisition
[Status 20:38:46 INFO] reading housekeeping
[Status 20:39:03 INFO] acquire complete
[Status 20:39:04 INFO] writing housekeeping
[Sequencer 20:39:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:39:04 INFO] incremented H scene to 366 completed views
[Sequencer 20:39:04 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:39:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:39:04 INFO] incremented to [AERI set: name S366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:39:04 INFO] H366.SIG(18)
[sigmove 20:39:04 DEBUG] transformed H366Ma.SPC -> H366MA.SPC
[sigmove 20:39:04 DEBUG] transformed H366Mb.SPC -> H366MB.SPC
[sigmove 20:39:04 DEBUG] transformed H366Mc.SPC -> H366MC.SPC
[sigmove 20:39:04 DEBUG] transformed H366Md.SPC -> H366MD.SPC
[sigmove 20:39:04 DEBUG] transformed H366Me.SPC -> H366ME.SPC
[sigmove 20:39:04 DEBUG] transformed H366Mf.SPC -> H366MF.SPC
[Status 20:39:04 INFO] data for H366 transferred to science data processing
[Tidy 20:39:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:39:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:39:04 INFO] resetting WatchDogTimer
[Status 20:39:04 INFO] Starting Set [AERI set: name S366, 6 scans, 0 angle, D16300 command]
[Ingest 20:39:04 INFO] Sending XML status message
[Status 20:39:04 INFO] Mirror angle: 0
[Mirror 20:39:05 INFO] rotating to position S
[Status 20:39:06 INFO] .SET file for ACQ96 ready
[Ingest 20:39:06 INFO] Starting acquisition
[Status 20:39:07 INFO] reading housekeeping
[Status 20:39:24 INFO] acquire complete
[Status 20:39:25 INFO] writing housekeeping
[Sequencer 20:39:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:39:25 INFO] incremented S scene to 366 completed views
[Sequencer 20:39:25 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:39:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:39:25 INFO] incremented to [AERI set: name T366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:39:25 INFO] S366.SIG(18)
[sigmove 20:39:25 DEBUG] transformed S366Ma.SPC -> S366MA.SPC
[sigmove 20:39:25 DEBUG] transformed S366Mb.SPC -> S366MB.SPC
[sigmove 20:39:25 DEBUG] transformed S366Mc.SPC -> S366MC.SPC
[sigmove 20:39:25 DEBUG] transformed S366Md.SPC -> S366MD.SPC
[sigmove 20:39:25 DEBUG] transformed S366Me.SPC -> S366ME.SPC
[sigmove 20:39:25 DEBUG] transformed S366Mf.SPC -> S366MF.SPC
[Status 20:39:25 INFO] data for S366 transferred to science data processing
[Tidy 20:39:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:39:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:39:25 INFO] resetting WatchDogTimer
[Status 20:39:26 INFO] Starting Set [AERI set: name T366, 6 scans, 0 angle, D16300 command]
[Ingest 20:39:26 INFO] Sending XML status message
[Status 20:39:26 INFO] Mirror angle: 0
[Mirror 20:39:26 INFO] rotating to position T
[Status 20:39:27 INFO] .SET file for ACQ96 ready
[Ingest 20:39:27 INFO] Starting acquisition
[Status 20:39:28 INFO] reading housekeeping
[Status 20:39:45 INFO] acquire complete
[Status 20:39:47 INFO] writing housekeeping
[Sequencer 20:39:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:39:47 INFO] incremented T scene to 366 completed views
[Sequencer 20:39:47 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:39:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:39:47 INFO] incremented to [AERI set: name U366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:39:47 INFO] T366.SIG(18)
[sigmove 20:39:47 DEBUG] transformed T366Ma.SPC -> T366MA.SPC
[sigmove 20:39:47 DEBUG] transformed T366Mb.SPC -> T366MB.SPC
[sigmove 20:39:47 DEBUG] transformed T366Mc.SPC -> T366MC.SPC
[sigmove 20:39:47 DEBUG] transformed T366Md.SPC -> T366MD.SPC
[sigmove 20:39:47 DEBUG] transformed T366Me.SPC -> T366ME.SPC
[sigmove 20:39:47 DEBUG] transformed T366Mf.SPC -> T366MF.SPC
[Status 20:39:47 INFO] data for T366 transferred to science data processing
[Tidy 20:39:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:39:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:39:47 INFO] resetting WatchDogTimer
[Status 20:39:48 INFO] Starting Set [AERI set: name U366, 6 scans, 0 angle, D16300 command]
[Ingest 20:39:48 INFO] Sending XML status message
[Status 20:39:48 INFO] Mirror angle: 0
[Mirror 20:39:48 INFO] rotating to position U
[Status 20:39:49 INFO] .SET file for ACQ96 ready
[Ingest 20:39:49 INFO] Starting acquisition
[Status 20:39:50 INFO] reading housekeeping
[Status 20:40:07 INFO] acquire complete
[Status 20:40:08 INFO] writing housekeeping
[Sequencer 20:40:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:40:08 INFO] incremented U scene to 366 completed views
[Sequencer 20:40:08 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:40:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:40:08 INFO] incremented to [AERI set: name V366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:40:08 INFO] U366.SIG(18)
[sigmove 20:40:08 DEBUG] transformed U366Ma.SPC -> U366MA.SPC
[sigmove 20:40:08 DEBUG] transformed U366Mb.SPC -> U366MB.SPC
[sigmove 20:40:08 DEBUG] transformed U366Mc.SPC -> U366MC.SPC
[sigmove 20:40:08 DEBUG] transformed U366Md.SPC -> U366MD.SPC
[sigmove 20:40:08 DEBUG] transformed U366Me.SPC -> U366ME.SPC
[sigmove 20:40:08 DEBUG] transformed U366Mf.SPC -> U366MF.SPC
[Status 20:40:08 INFO] data for U366 transferred to science data processing
[Tidy 20:40:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:40:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:40:08 INFO] resetting WatchDogTimer
[Status 20:40:08 INFO] Starting Set [AERI set: name V366, 6 scans, 0 angle, D16300 command]
[Ingest 20:40:08 INFO] Sending XML status message
[Status 20:40:08 INFO] Mirror angle: 0
[Mirror 20:40:09 INFO] rotating to position V
[Status 20:40:09 INFO] .SET file for ACQ96 ready
[Ingest 20:40:10 INFO] Starting acquisition
[Status 20:40:11 INFO] reading housekeeping
[Status 20:40:28 INFO] acquire complete
[Status 20:40:29 INFO] writing housekeeping
[Sequencer 20:40:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:40:29 INFO] incremented V scene to 366 completed views
[Sequencer 20:40:29 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:40:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:40:29 INFO] incremented to [AERI set: name W366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:40:29 INFO] V366.SIG(18)
[sigmove 20:40:29 DEBUG] transformed V366Ma.SPC -> V366MA.SPC
[sigmove 20:40:29 DEBUG] transformed V366Mb.SPC -> V366MB.SPC
[sigmove 20:40:29 DEBUG] transformed V366Mc.SPC -> V366MC.SPC
[sigmove 20:40:29 DEBUG] transformed V366Md.SPC -> V366MD.SPC
[sigmove 20:40:29 DEBUG] transformed V366Me.SPC -> V366ME.SPC
[sigmove 20:40:29 DEBUG] transformed V366Mf.SPC -> V366MF.SPC
[Status 20:40:29 INFO] data for V366 transferred to science data processing
[Tidy 20:40:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:40:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:40:29 INFO] resetting WatchDogTimer
[Status 20:40:30 INFO] Starting Set [AERI set: name W366, 6 scans, 0 angle, D16300 command]
[Ingest 20:40:30 INFO] Sending XML status message
[Status 20:40:30 INFO] Mirror angle: 0
[Mirror 20:40:30 INFO] rotating to position W
[Status 20:40:31 INFO] .SET file for ACQ96 ready
[Ingest 20:40:31 INFO] Starting acquisition
[Status 20:40:32 INFO] reading housekeeping
[Status 20:40:49 INFO] acquire complete
[Status 20:40:51 INFO] writing housekeeping
[Sequencer 20:40:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:40:51 INFO] incremented W scene to 366 completed views
[Sequencer 20:40:51 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:40:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:40:51 INFO] incremented to [AERI set: name X366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:40:51 INFO] W366.SIG(18)
[sigmove 20:40:51 DEBUG] transformed W366Ma.SPC -> W366MA.SPC
[sigmove 20:40:51 DEBUG] transformed W366Mb.SPC -> W366MB.SPC
[sigmove 20:40:51 DEBUG] transformed W366Mc.SPC -> W366MC.SPC
[sigmove 20:40:51 DEBUG] transformed W366Md.SPC -> W366MD.SPC
[sigmove 20:40:51 DEBUG] transformed W366Me.SPC -> W366ME.SPC
[sigmove 20:40:51 DEBUG] transformed W366Mf.SPC -> W366MF.SPC
[Status 20:40:51 INFO] data for W366 transferred to science data processing
[Tidy 20:40:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:40:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:40:51 INFO] resetting WatchDogTimer
[Status 20:40:51 INFO] Starting Set [AERI set: name X366, 6 scans, 0 angle, D16300 command]
[Ingest 20:40:51 INFO] Sending XML status message
[Status 20:40:51 INFO] Mirror angle: 0
[Mirror 20:40:51 INFO] rotating to position X
[Status 20:40:52 INFO] .SET file for ACQ96 ready
[Ingest 20:40:52 INFO] Starting acquisition
[Status 20:40:53 INFO] reading housekeeping
[Status 20:41:11 INFO] acquire complete
[Status 20:41:12 INFO] writing housekeeping
[Sequencer 20:41:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:41:12 INFO] incremented X scene to 366 completed views
[Sequencer 20:41:12 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:41:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:41:12 INFO] incremented to [AERI set: name Y366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:41:12 INFO] X366.SIG(18)
[sigmove 20:41:12 DEBUG] transformed X366Ma.SPC -> X366MA.SPC
[sigmove 20:41:12 DEBUG] transformed X366Mb.SPC -> X366MB.SPC
[sigmove 20:41:12 DEBUG] transformed X366Mc.SPC -> X366MC.SPC
[sigmove 20:41:12 DEBUG] transformed X366Md.SPC -> X366MD.SPC
[sigmove 20:41:12 DEBUG] transformed X366Me.SPC -> X366ME.SPC
[sigmove 20:41:12 DEBUG] transformed X366Mf.SPC -> X366MF.SPC
[Status 20:41:12 INFO] data for X366 transferred to science data processing
[Tidy 20:41:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:41:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:41:12 INFO] resetting WatchDogTimer
[Status 20:41:12 INFO] Starting Set [AERI set: name Y366, 6 scans, 0 angle, D16300 command]
[Ingest 20:41:12 INFO] Sending XML status message
[Status 20:41:12 INFO] Mirror angle: 0
[Mirror 20:41:13 INFO] rotating to position Y
[Status 20:41:13 INFO] .SET file for ACQ96 ready
[Ingest 20:41:14 INFO] Starting acquisition
[Status 20:41:14 INFO] reading housekeeping
[Status 20:41:32 INFO] acquire complete
[Status 20:41:33 INFO] writing housekeeping
[Sequencer 20:41:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:41:33 INFO] incremented Y scene to 366 completed views
[Sequencer 20:41:33 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:41:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:41:33 INFO] incremented to [AERI set: name Z366, 6 scans, 0 angle, D16300 command] set
[sigmove 20:41:33 INFO] Y366.SIG(18)
[sigmove 20:41:33 DEBUG] transformed Y366Ma.SPC -> Y366MA.SPC
[sigmove 20:41:33 DEBUG] transformed Y366Mb.SPC -> Y366MB.SPC
[sigmove 20:41:33 DEBUG] transformed Y366Mc.SPC -> Y366MC.SPC
[sigmove 20:41:33 DEBUG] transformed Y366Md.SPC -> Y366MD.SPC
[sigmove 20:41:33 DEBUG] transformed Y366Me.SPC -> Y366ME.SPC
[sigmove 20:41:33 DEBUG] transformed Y366Mf.SPC -> Y366MF.SPC
[Status 20:41:33 INFO] data for Y366 transferred to science data processing
[Tidy 20:41:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:41:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:41:33 INFO] resetting WatchDogTimer
[Status 20:41:34 INFO] Starting Set [AERI set: name Z366, 6 scans, 0 angle, D16300 command]
[Ingest 20:41:34 INFO] Sending XML status message
[Status 20:41:34 INFO] Mirror angle: 0
[Mirror 20:41:34 INFO] rotating to position Z
[Status 20:41:35 INFO] .SET file for ACQ96 ready
[Ingest 20:41:35 INFO] Starting acquisition
[Status 20:41:36 INFO] reading housekeeping
[Status 20:41:53 INFO] acquire complete
[Status 20:41:54 INFO] writing housekeeping
[Sequencer 20:41:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:41:54 INFO] incremented Z scene to 366 completed views
[Sequencer 20:41:54 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:41:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:41:54 INFO] incremented to [AERI set: name H367, 6 scans, 60 angle, D22500 command] set
[sigmove 20:41:54 INFO] Z366.SIG(18)
[sigmove 20:41:54 DEBUG] transformed Z366Ma.SPC -> Z366MA.SPC
[sigmove 20:41:54 DEBUG] transformed Z366Mb.SPC -> Z366MB.SPC
[sigmove 20:41:54 DEBUG] transformed Z366Mc.SPC -> Z366MC.SPC
[sigmove 20:41:54 DEBUG] transformed Z366Md.SPC -> Z366MD.SPC
[sigmove 20:41:54 DEBUG] transformed Z366Me.SPC -> Z366ME.SPC
[sigmove 20:41:54 DEBUG] transformed Z366Mf.SPC -> Z366MF.SPC
[Status 20:41:54 INFO] data for Z366 transferred to science data processing
[Tidy 20:41:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:41:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:41:54 INFO] resetting WatchDogTimer
[Status 20:41:55 INFO] Starting Set [AERI set: name H367, 6 scans, 60 angle, D22500 command]
[Ingest 20:41:55 INFO] Sending XML status message
[Status 20:41:55 INFO] Mirror angle: 60
[Mirror 20:41:55 INFO] rotating to position H
[Status 20:41:57 INFO] .SET file for ACQ96 ready
[Ingest 20:41:57 INFO] Starting acquisition
[Status 20:41:57 INFO] reading housekeeping
[Status 20:42:15 INFO] acquire complete
[Status 20:42:16 INFO] writing housekeeping
[Sequencer 20:42:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:42:16 INFO] incremented H scene to 367 completed views
[Sequencer 20:42:16 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:42:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:42:16 INFO] incremented to [AERI set: name A367, 6 scans, 120 angle, D28300 command] set
[sigmove 20:42:16 INFO] H367.SIG(18)
[sigmove 20:42:16 DEBUG] transformed H367Ma.SPC -> H367MA.SPC
[sigmove 20:42:16 DEBUG] transformed H367Mb.SPC -> H367MB.SPC
[sigmove 20:42:16 DEBUG] transformed H367Mc.SPC -> H367MC.SPC
[sigmove 20:42:16 DEBUG] transformed H367Md.SPC -> H367MD.SPC
[sigmove 20:42:16 DEBUG] transformed H367Me.SPC -> H367ME.SPC
[sigmove 20:42:16 DEBUG] transformed H367Mf.SPC -> H367MF.SPC
[Status 20:42:16 INFO] data for H367 transferred to science data processing
[Tidy 20:42:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:42:16 INFO] A365.FIN(19),H365.FIN(19),S365.FIN(19),T365.FIN(19),U365.FIN(19),V365.FIN(19),W365.FIN(19),X365.FIN(19),Y365.FIN(19),Z365.FIN(19),A366.FIN(19),H366.FIN(19),S366.FIN(19),T366.FIN(19),U366.FIN(19),V366.FIN(19),W366.FIN(19),X366.FIN(19),Y366.FIN(19),Z366.FIN(19)
[sigmove 20:42:16 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:42:16 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:42:22 DEBUG] done zipping
[WatchDog 20:42:23 INFO] resetting WatchDogTimer
[Status 20:42:23 INFO] Starting Set [AERI set: name A367, 6 scans, 120 angle, D28300 command]
[Ingest 20:42:23 INFO] Sending XML status message
[Status 20:42:23 INFO] Mirror angle: 120
[Mirror 20:42:24 INFO] rotating to position A
[Status 20:42:25 INFO] .SET file for ACQ96 ready
[Ingest 20:42:25 INFO] Starting acquisition
[Status 20:42:26 INFO] reading housekeeping
[Status 20:42:43 INFO] acquire complete
[Status 20:42:44 INFO] writing housekeeping
[Sequencer 20:42:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:42:44 INFO] incremented A scene to 367 completed views
[Sequencer 20:42:44 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:42:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:42:44 INFO] incremented to [AERI set: name S367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:42:44 INFO] A367.SIG(18)
[sigmove 20:42:44 DEBUG] transformed A367Ma.SPC -> A367MA.SPC
[sigmove 20:42:44 DEBUG] transformed A367Mb.SPC -> A367MB.SPC
[sigmove 20:42:44 DEBUG] transformed A367Mc.SPC -> A367MC.SPC
[sigmove 20:42:44 DEBUG] transformed A367Md.SPC -> A367MD.SPC
[sigmove 20:42:44 DEBUG] transformed A367Me.SPC -> A367ME.SPC
[sigmove 20:42:44 DEBUG] transformed A367Mf.SPC -> A367MF.SPC
[Status 20:42:44 INFO] data for A367 transferred to science data processing
[Tidy 20:42:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:42:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:42:44 INFO] resetting WatchDogTimer
[Status 20:42:44 INFO] Starting Set [AERI set: name S367, 6 scans, 0 angle, D16300 command]
[Ingest 20:42:44 INFO] Sending XML status message
[Status 20:42:44 INFO] Mirror angle: 0
[Mirror 20:42:45 INFO] rotating to position S
[Status 20:42:46 INFO] .SET file for ACQ96 ready
[Ingest 20:42:47 INFO] Starting acquisition
[Status 20:42:47 INFO] reading housekeeping
[Status 20:43:05 INFO] acquire complete
[Status 20:43:06 INFO] writing housekeeping
[Sequencer 20:43:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:43:06 INFO] incremented S scene to 367 completed views
[Sequencer 20:43:06 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:43:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:43:06 INFO] incremented to [AERI set: name T367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:43:06 INFO] S367.SIG(18)
[sigmove 20:43:06 DEBUG] transformed S367Ma.SPC -> S367MA.SPC
[sigmove 20:43:06 DEBUG] transformed S367Mb.SPC -> S367MB.SPC
[sigmove 20:43:06 DEBUG] transformed S367Mc.SPC -> S367MC.SPC
[sigmove 20:43:06 DEBUG] transformed S367Md.SPC -> S367MD.SPC
[sigmove 20:43:06 DEBUG] transformed S367Me.SPC -> S367ME.SPC
[sigmove 20:43:06 DEBUG] transformed S367Mf.SPC -> S367MF.SPC
[Status 20:43:06 INFO] data for S367 transferred to science data processing
[Tidy 20:43:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:43:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:43:06 INFO] resetting WatchDogTimer
[Status 20:43:07 INFO] Starting Set [AERI set: name T367, 6 scans, 0 angle, D16300 command]
[Ingest 20:43:07 INFO] Sending XML status message
[Status 20:43:07 INFO] Mirror angle: 0
[Mirror 20:43:07 INFO] rotating to position T
[Status 20:43:08 INFO] .SET file for ACQ96 ready
[Ingest 20:43:08 INFO] Starting acquisition
[Status 20:43:09 INFO] reading housekeeping
[Status 20:43:26 INFO] acquire complete
[Status 20:43:28 INFO] writing housekeeping
[Sequencer 20:43:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:43:28 INFO] incremented T scene to 367 completed views
[Sequencer 20:43:28 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:43:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:43:28 INFO] incremented to [AERI set: name U367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:43:28 INFO] T367.SIG(18)
[sigmove 20:43:28 DEBUG] transformed T367Ma.SPC -> T367MA.SPC
[sigmove 20:43:28 DEBUG] transformed T367Mb.SPC -> T367MB.SPC
[sigmove 20:43:28 DEBUG] transformed T367Mc.SPC -> T367MC.SPC
[sigmove 20:43:28 DEBUG] transformed T367Md.SPC -> T367MD.SPC
[sigmove 20:43:28 DEBUG] transformed T367Me.SPC -> T367ME.SPC
[sigmove 20:43:28 DEBUG] transformed T367Mf.SPC -> T367MF.SPC
[Status 20:43:28 INFO] data for T367 transferred to science data processing
[Tidy 20:43:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:43:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:43:28 INFO] resetting WatchDogTimer
[Status 20:43:28 INFO] Starting Set [AERI set: name U367, 6 scans, 0 angle, D16300 command]
[Ingest 20:43:28 INFO] Sending XML status message
[Status 20:43:28 INFO] Mirror angle: 0
[Mirror 20:43:29 INFO] rotating to position U
[Status 20:43:29 INFO] .SET file for ACQ96 ready
[Ingest 20:43:30 INFO] Starting acquisition
[Status 20:43:30 INFO] reading housekeeping
[Status 20:43:48 INFO] acquire complete
[Status 20:43:49 INFO] writing housekeeping
[Sequencer 20:43:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:43:49 INFO] incremented U scene to 367 completed views
[Sequencer 20:43:49 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:43:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:43:49 INFO] incremented to [AERI set: name V367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:43:49 INFO] U367.SIG(18)
[sigmove 20:43:49 DEBUG] transformed U367Ma.SPC -> U367MA.SPC
[sigmove 20:43:49 DEBUG] transformed U367Mb.SPC -> U367MB.SPC
[sigmove 20:43:49 DEBUG] transformed U367Mc.SPC -> U367MC.SPC
[sigmove 20:43:49 DEBUG] transformed U367Md.SPC -> U367MD.SPC
[sigmove 20:43:49 DEBUG] transformed U367Me.SPC -> U367ME.SPC
[sigmove 20:43:49 DEBUG] transformed U367Mf.SPC -> U367MF.SPC
[Status 20:43:49 INFO] data for U367 transferred to science data processing
[Tidy 20:43:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:43:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:43:49 INFO] resetting WatchDogTimer
[Status 20:43:49 INFO] Starting Set [AERI set: name V367, 6 scans, 0 angle, D16300 command]
[Ingest 20:43:49 INFO] Sending XML status message
[Status 20:43:49 INFO] Mirror angle: 0
[Mirror 20:43:50 INFO] rotating to position V
[Status 20:43:50 INFO] .SET file for ACQ96 ready
[Ingest 20:43:51 INFO] Starting acquisition
[Status 20:43:51 INFO] reading housekeeping
[Status 20:44:09 INFO] acquire complete
[Status 20:44:10 INFO] writing housekeeping
[Sequencer 20:44:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:44:10 INFO] incremented V scene to 367 completed views
[Sequencer 20:44:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:44:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:44:10 INFO] incremented to [AERI set: name W367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:44:10 INFO] V367.SIG(18)
[sigmove 20:44:10 DEBUG] transformed V367Ma.SPC -> V367MA.SPC
[sigmove 20:44:10 DEBUG] transformed V367Mb.SPC -> V367MB.SPC
[sigmove 20:44:10 DEBUG] transformed V367Mc.SPC -> V367MC.SPC
[sigmove 20:44:10 DEBUG] transformed V367Md.SPC -> V367MD.SPC
[sigmove 20:44:10 DEBUG] transformed V367Me.SPC -> V367ME.SPC
[sigmove 20:44:10 DEBUG] transformed V367Mf.SPC -> V367MF.SPC
[Status 20:44:10 INFO] data for V367 transferred to science data processing
[Tidy 20:44:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:44:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:44:10 INFO] resetting WatchDogTimer
[Status 20:44:11 INFO] Starting Set [AERI set: name W367, 6 scans, 0 angle, D16300 command]
[Ingest 20:44:11 INFO] Sending XML status message
[Status 20:44:11 INFO] Mirror angle: 0
[Mirror 20:44:11 INFO] rotating to position W
[Status 20:44:12 INFO] .SET file for ACQ96 ready
[Ingest 20:44:12 INFO] Starting acquisition
[Status 20:44:13 INFO] reading housekeeping
[Status 20:44:30 INFO] acquire complete
[Status 20:44:31 INFO] writing housekeeping
[Sequencer 20:44:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:44:31 INFO] incremented W scene to 367 completed views
[Sequencer 20:44:31 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:44:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:44:31 INFO] incremented to [AERI set: name X367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:44:31 INFO] W367.SIG(18)
[sigmove 20:44:31 DEBUG] transformed W367Ma.SPC -> W367MA.SPC
[sigmove 20:44:31 DEBUG] transformed W367Mb.SPC -> W367MB.SPC
[sigmove 20:44:31 DEBUG] transformed W367Mc.SPC -> W367MC.SPC
[sigmove 20:44:31 DEBUG] transformed W367Md.SPC -> W367MD.SPC
[sigmove 20:44:31 DEBUG] transformed W367Me.SPC -> W367ME.SPC
[sigmove 20:44:31 DEBUG] transformed W367Mf.SPC -> W367MF.SPC
[Status 20:44:31 INFO] data for W367 transferred to science data processing
[Tidy 20:44:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:44:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:44:31 INFO] resetting WatchDogTimer
[Status 20:44:32 INFO] Starting Set [AERI set: name X367, 6 scans, 0 angle, D16300 command]
[Ingest 20:44:32 INFO] Sending XML status message
[Status 20:44:32 INFO] Mirror angle: 0
[Mirror 20:44:32 INFO] rotating to position X
[Status 20:44:33 INFO] .SET file for ACQ96 ready
[Ingest 20:44:33 INFO] Starting acquisition
[Status 20:44:34 INFO] reading housekeeping
[Status 20:44:52 INFO] acquire complete
[Status 20:44:53 INFO] writing housekeeping
[Sequencer 20:44:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:44:53 INFO] incremented X scene to 367 completed views
[Sequencer 20:44:53 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:44:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:44:53 INFO] incremented to [AERI set: name Y367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:44:53 INFO] X367.SIG(18)
[sigmove 20:44:53 DEBUG] transformed X367Ma.SPC -> X367MA.SPC
[sigmove 20:44:53 DEBUG] transformed X367Mb.SPC -> X367MB.SPC
[sigmove 20:44:53 DEBUG] transformed X367Mc.SPC -> X367MC.SPC
[sigmove 20:44:53 DEBUG] transformed X367Md.SPC -> X367MD.SPC
[sigmove 20:44:53 DEBUG] transformed X367Me.SPC -> X367ME.SPC
[sigmove 20:44:53 DEBUG] transformed X367Mf.SPC -> X367MF.SPC
[Status 20:44:53 INFO] data for X367 transferred to science data processing
[Tidy 20:44:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:44:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:44:53 INFO] resetting WatchDogTimer
[Status 20:44:53 INFO] Starting Set [AERI set: name Y367, 6 scans, 0 angle, D16300 command]
[Ingest 20:44:53 INFO] Sending XML status message
[Status 20:44:53 INFO] Mirror angle: 0
[Mirror 20:44:54 INFO] rotating to position Y
[Status 20:44:54 INFO] .SET file for ACQ96 ready
[Ingest 20:44:55 INFO] Starting acquisition
[Status 20:44:55 INFO] reading housekeeping
[Status 20:45:13 INFO] acquire complete
[Status 20:45:14 INFO] writing housekeeping
[Sequencer 20:45:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:45:14 INFO] incremented Y scene to 367 completed views
[Sequencer 20:45:14 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:45:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:45:14 INFO] incremented to [AERI set: name Z367, 6 scans, 0 angle, D16300 command] set
[sigmove 20:45:14 INFO] Y367.SIG(18)
[sigmove 20:45:14 DEBUG] transformed Y367Ma.SPC -> Y367MA.SPC
[sigmove 20:45:14 DEBUG] transformed Y367Mb.SPC -> Y367MB.SPC
[sigmove 20:45:14 DEBUG] transformed Y367Mc.SPC -> Y367MC.SPC
[sigmove 20:45:14 DEBUG] transformed Y367Md.SPC -> Y367MD.SPC
[sigmove 20:45:14 DEBUG] transformed Y367Me.SPC -> Y367ME.SPC
[sigmove 20:45:14 DEBUG] transformed Y367Mf.SPC -> Y367MF.SPC
[Status 20:45:14 INFO] data for Y367 transferred to science data processing
[Tidy 20:45:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:45:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:45:14 INFO] resetting WatchDogTimer
[Status 20:45:15 INFO] Starting Set [AERI set: name Z367, 6 scans, 0 angle, D16300 command]
[Ingest 20:45:15 INFO] Sending XML status message
[Status 20:45:15 INFO] Mirror angle: 0
[Mirror 20:45:15 INFO] rotating to position Z
[Status 20:45:16 INFO] .SET file for ACQ96 ready
[Ingest 20:45:16 INFO] Starting acquisition
[Status 20:45:16 INFO] reading housekeeping
[Status 20:45:34 INFO] acquire complete
[Status 20:45:35 INFO] writing housekeeping
[Sequencer 20:45:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:45:35 INFO] incremented Z scene to 367 completed views
[Sequencer 20:45:35 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:45:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:45:35 INFO] incremented to [AERI set: name A368, 6 scans, 120 angle, D28300 command] set
[sigmove 20:45:35 INFO] Z367.SIG(18)
[sigmove 20:45:35 DEBUG] transformed Z367Ma.SPC -> Z367MA.SPC
[sigmove 20:45:35 DEBUG] transformed Z367Mb.SPC -> Z367MB.SPC
[sigmove 20:45:35 DEBUG] transformed Z367Mc.SPC -> Z367MC.SPC
[sigmove 20:45:35 DEBUG] transformed Z367Md.SPC -> Z367MD.SPC
[sigmove 20:45:35 DEBUG] transformed Z367Me.SPC -> Z367ME.SPC
[sigmove 20:45:35 DEBUG] transformed Z367Mf.SPC -> Z367MF.SPC
[Status 20:45:35 INFO] data for Z367 transferred to science data processing
[Tidy 20:45:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:45:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:45:35 INFO] resetting WatchDogTimer
[Status 20:45:36 INFO] Starting Set [AERI set: name A368, 6 scans, 120 angle, D28300 command]
[Ingest 20:45:36 INFO] Sending XML status message
[Status 20:45:36 INFO] Mirror angle: 120
[Mirror 20:45:36 INFO] rotating to position A
[Status 20:45:38 INFO] .SET file for ACQ96 ready
[Ingest 20:45:38 INFO] Starting acquisition
[Status 20:45:39 INFO] reading housekeeping
[Status 20:45:57 INFO] acquire complete
[Status 20:45:58 INFO] writing housekeeping
[Sequencer 20:45:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:45:58 INFO] incremented A scene to 368 completed views
[Sequencer 20:45:58 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:45:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:45:58 INFO] incremented to [AERI set: name H368, 6 scans, 60 angle, D22500 command] set
[sigmove 20:45:58 INFO] A368.SIG(18)
[sigmove 20:45:58 DEBUG] transformed A368Ma.SPC -> A368MA.SPC
[sigmove 20:45:58 DEBUG] transformed A368Mb.SPC -> A368MB.SPC
[sigmove 20:45:58 DEBUG] transformed A368Mc.SPC -> A368MC.SPC
[sigmove 20:45:58 DEBUG] transformed A368Md.SPC -> A368MD.SPC
[sigmove 20:45:58 DEBUG] transformed A368Me.SPC -> A368ME.SPC
[sigmove 20:45:58 DEBUG] transformed A368Mf.SPC -> A368MF.SPC
[Status 20:45:58 INFO] data for A368 transferred to science data processing
[Tidy 20:45:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:45:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:45:58 INFO] resetting WatchDogTimer
[Status 20:45:58 INFO] Starting Set [AERI set: name H368, 6 scans, 60 angle, D22500 command]
[Ingest 20:45:58 INFO] Sending XML status message
[Status 20:45:58 INFO] Mirror angle: 60
[Mirror 20:45:59 INFO] rotating to position H
[Status 20:46:00 INFO] .SET file for ACQ96 ready
[Ingest 20:46:00 INFO] Starting acquisition
[Status 20:46:01 INFO] reading housekeeping
[Status 20:46:18 INFO] acquire complete
[Status 20:46:19 INFO] writing housekeeping
[Sequencer 20:46:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:46:19 INFO] incremented H scene to 368 completed views
[Sequencer 20:46:19 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:46:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:46:19 INFO] incremented to [AERI set: name S368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:46:19 INFO] H368.SIG(18)
[sigmove 20:46:19 DEBUG] transformed H368Ma.SPC -> H368MA.SPC
[sigmove 20:46:19 DEBUG] transformed H368Mb.SPC -> H368MB.SPC
[sigmove 20:46:19 DEBUG] transformed H368Mc.SPC -> H368MC.SPC
[sigmove 20:46:19 DEBUG] transformed H368Md.SPC -> H368MD.SPC
[sigmove 20:46:19 DEBUG] transformed H368Me.SPC -> H368ME.SPC
[sigmove 20:46:19 DEBUG] transformed H368Mf.SPC -> H368MF.SPC
[Status 20:46:19 INFO] data for H368 transferred to science data processing
[Tidy 20:46:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:46:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:46:19 INFO] resetting WatchDogTimer
[Status 20:46:20 INFO] Starting Set [AERI set: name S368, 6 scans, 0 angle, D16300 command]
[Ingest 20:46:20 INFO] Sending XML status message
[Status 20:46:20 INFO] Mirror angle: 0
[Mirror 20:46:20 INFO] rotating to position S
[Status 20:46:21 INFO] .SET file for ACQ96 ready
[Ingest 20:46:22 INFO] Starting acquisition
[Status 20:46:22 INFO] reading housekeeping
[Status 20:46:39 INFO] acquire complete
[Status 20:46:40 INFO] writing housekeeping
[Sequencer 20:46:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:46:40 INFO] incremented S scene to 368 completed views
[Sequencer 20:46:40 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:46:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:46:40 INFO] incremented to [AERI set: name T368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:46:40 INFO] S368.SIG(18)
[sigmove 20:46:40 DEBUG] transformed S368Ma.SPC -> S368MA.SPC
[sigmove 20:46:40 DEBUG] transformed S368Mb.SPC -> S368MB.SPC
[sigmove 20:46:40 DEBUG] transformed S368Mc.SPC -> S368MC.SPC
[sigmove 20:46:40 DEBUG] transformed S368Md.SPC -> S368MD.SPC
[sigmove 20:46:40 DEBUG] transformed S368Me.SPC -> S368ME.SPC
[sigmove 20:46:40 DEBUG] transformed S368Mf.SPC -> S368MF.SPC
[Status 20:46:40 INFO] data for S368 transferred to science data processing
[Tidy 20:46:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:46:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:46:40 INFO] resetting WatchDogTimer
[Status 20:46:41 INFO] Starting Set [AERI set: name T368, 6 scans, 0 angle, D16300 command]
[Ingest 20:46:41 INFO] Sending XML status message
[Status 20:46:41 INFO] Mirror angle: 0
[Mirror 20:46:41 INFO] rotating to position T
[Status 20:46:42 INFO] .SET file for ACQ96 ready
[Ingest 20:46:42 INFO] Starting acquisition
[Status 20:46:43 INFO] reading housekeeping
[Status 20:47:01 INFO] acquire complete
[Status 20:47:02 INFO] writing housekeeping
[Sequencer 20:47:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:47:02 INFO] incremented T scene to 368 completed views
[Sequencer 20:47:02 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:47:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:47:02 INFO] incremented to [AERI set: name U368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:47:02 INFO] T368.SIG(18)
[sigmove 20:47:02 DEBUG] transformed T368Ma.SPC -> T368MA.SPC
[sigmove 20:47:02 DEBUG] transformed T368Mb.SPC -> T368MB.SPC
[sigmove 20:47:02 DEBUG] transformed T368Mc.SPC -> T368MC.SPC
[sigmove 20:47:02 DEBUG] transformed T368Md.SPC -> T368MD.SPC
[sigmove 20:47:02 DEBUG] transformed T368Me.SPC -> T368ME.SPC
[sigmove 20:47:02 DEBUG] transformed T368Mf.SPC -> T368MF.SPC
[Status 20:47:02 INFO] data for T368 transferred to science data processing
[Tidy 20:47:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:47:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:47:02 INFO] resetting WatchDogTimer
[Status 20:47:02 INFO] Starting Set [AERI set: name U368, 6 scans, 0 angle, D16300 command]
[Ingest 20:47:02 INFO] Sending XML status message
[Status 20:47:02 INFO] Mirror angle: 0
[Mirror 20:47:03 INFO] rotating to position U
[Status 20:47:03 INFO] .SET file for ACQ96 ready
[Ingest 20:47:04 INFO] Starting acquisition
[Status 20:47:04 INFO] reading housekeeping
[Status 20:47:22 INFO] acquire complete
[Status 20:47:23 INFO] writing housekeeping
[Sequencer 20:47:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:47:23 INFO] incremented U scene to 368 completed views
[Sequencer 20:47:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:47:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:47:23 INFO] incremented to [AERI set: name V368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:47:23 INFO] U368.SIG(18)
[sigmove 20:47:23 DEBUG] transformed U368Ma.SPC -> U368MA.SPC
[sigmove 20:47:23 DEBUG] transformed U368Mb.SPC -> U368MB.SPC
[sigmove 20:47:23 DEBUG] transformed U368Mc.SPC -> U368MC.SPC
[sigmove 20:47:23 DEBUG] transformed U368Md.SPC -> U368MD.SPC
[sigmove 20:47:23 DEBUG] transformed U368Me.SPC -> U368ME.SPC
[sigmove 20:47:23 DEBUG] transformed U368Mf.SPC -> U368MF.SPC
[Status 20:47:23 INFO] data for U368 transferred to science data processing
[Tidy 20:47:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:47:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:47:23 INFO] resetting WatchDogTimer
[Status 20:47:24 INFO] Starting Set [AERI set: name V368, 6 scans, 0 angle, D16300 command]
[Ingest 20:47:24 INFO] Sending XML status message
[Status 20:47:24 INFO] Mirror angle: 0
[Mirror 20:47:24 INFO] rotating to position V
[Status 20:47:25 INFO] .SET file for ACQ96 ready
[Ingest 20:47:25 INFO] Starting acquisition
[Status 20:47:26 INFO] reading housekeeping
[Status 20:47:47 INFO] acquire complete
[Status 20:47:48 INFO] writing housekeeping
[Sequencer 20:47:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:47:48 INFO] incremented V scene to 368 completed views
[Sequencer 20:47:48 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:47:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:47:48 INFO] incremented to [AERI set: name W368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:47:48 INFO] V368.SIG(18)
[sigmove 20:47:48 DEBUG] transformed V368Ma.SPC -> V368MA.SPC
[sigmove 20:47:48 DEBUG] transformed V368Mb.SPC -> V368MB.SPC
[sigmove 20:47:48 DEBUG] transformed V368Mc.SPC -> V368MC.SPC
[sigmove 20:47:48 DEBUG] transformed V368Md.SPC -> V368MD.SPC
[sigmove 20:47:48 DEBUG] transformed V368Me.SPC -> V368ME.SPC
[sigmove 20:47:48 DEBUG] transformed V368Mf.SPC -> V368MF.SPC
[Status 20:47:48 INFO] data for V368 transferred to science data processing
[Tidy 20:47:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:47:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:47:48 INFO] resetting WatchDogTimer
[Status 20:47:48 INFO] Starting Set [AERI set: name W368, 6 scans, 0 angle, D16300 command]
[Ingest 20:47:48 INFO] Sending XML status message
[Status 20:47:48 INFO] Mirror angle: 0
[Mirror 20:47:49 INFO] rotating to position W
[Status 20:47:49 INFO] .SET file for ACQ96 ready
[Ingest 20:47:50 INFO] Starting acquisition
[Status 20:47:50 INFO] reading housekeeping
[Status 20:48:08 INFO] acquire complete
[Status 20:48:09 INFO] writing housekeeping
[Sequencer 20:48:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:48:09 INFO] incremented W scene to 368 completed views
[Sequencer 20:48:09 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:48:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:48:09 INFO] incremented to [AERI set: name X368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:48:09 INFO] W368.SIG(18)
[sigmove 20:48:09 DEBUG] transformed W368Ma.SPC -> W368MA.SPC
[sigmove 20:48:09 DEBUG] transformed W368Mb.SPC -> W368MB.SPC
[sigmove 20:48:09 DEBUG] transformed W368Mc.SPC -> W368MC.SPC
[sigmove 20:48:09 DEBUG] transformed W368Md.SPC -> W368MD.SPC
[sigmove 20:48:09 DEBUG] transformed W368Me.SPC -> W368ME.SPC
[sigmove 20:48:09 DEBUG] transformed W368Mf.SPC -> W368MF.SPC
[Status 20:48:09 INFO] data for W368 transferred to science data processing
[Tidy 20:48:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:48:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:48:09 INFO] resetting WatchDogTimer
[Status 20:48:10 INFO] Starting Set [AERI set: name X368, 6 scans, 0 angle, D16300 command]
[Ingest 20:48:10 INFO] Sending XML status message
[Status 20:48:10 INFO] Mirror angle: 0
[Mirror 20:48:10 INFO] rotating to position X
[Status 20:48:11 INFO] .SET file for ACQ96 ready
[Ingest 20:48:11 INFO] Starting acquisition
[Status 20:48:12 INFO] reading housekeeping
[Status 20:48:29 INFO] acquire complete
[Status 20:48:30 INFO] writing housekeeping
[Sequencer 20:48:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:48:30 INFO] incremented X scene to 368 completed views
[Sequencer 20:48:30 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:48:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:48:30 INFO] incremented to [AERI set: name Y368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:48:30 INFO] X368.SIG(18)
[sigmove 20:48:30 DEBUG] transformed X368Ma.SPC -> X368MA.SPC
[sigmove 20:48:30 DEBUG] transformed X368Mb.SPC -> X368MB.SPC
[sigmove 20:48:30 DEBUG] transformed X368Mc.SPC -> X368MC.SPC
[sigmove 20:48:30 DEBUG] transformed X368Md.SPC -> X368MD.SPC
[sigmove 20:48:30 DEBUG] transformed X368Me.SPC -> X368ME.SPC
[sigmove 20:48:30 DEBUG] transformed X368Mf.SPC -> X368MF.SPC
[Status 20:48:30 INFO] data for X368 transferred to science data processing
[Tidy 20:48:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:48:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:48:30 INFO] resetting WatchDogTimer
[Status 20:48:31 INFO] Starting Set [AERI set: name Y368, 6 scans, 0 angle, D16300 command]
[Ingest 20:48:31 INFO] Sending XML status message
[Status 20:48:31 INFO] Mirror angle: 0
[Mirror 20:48:31 INFO] rotating to position Y
[Status 20:48:32 INFO] .SET file for ACQ96 ready
[Ingest 20:48:32 INFO] Starting acquisition
[Status 20:48:33 INFO] reading housekeeping
[Status 20:48:51 INFO] acquire complete
[Status 20:48:52 INFO] writing housekeeping
[Sequencer 20:48:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:48:52 INFO] incremented Y scene to 368 completed views
[Sequencer 20:48:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:48:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:48:52 INFO] incremented to [AERI set: name Z368, 6 scans, 0 angle, D16300 command] set
[sigmove 20:48:52 INFO] Y368.SIG(18)
[sigmove 20:48:52 DEBUG] transformed Y368Ma.SPC -> Y368MA.SPC
[sigmove 20:48:52 DEBUG] transformed Y368Mb.SPC -> Y368MB.SPC
[sigmove 20:48:52 DEBUG] transformed Y368Mc.SPC -> Y368MC.SPC
[sigmove 20:48:52 DEBUG] transformed Y368Md.SPC -> Y368MD.SPC
[sigmove 20:48:52 DEBUG] transformed Y368Me.SPC -> Y368ME.SPC
[sigmove 20:48:52 DEBUG] transformed Y368Mf.SPC -> Y368MF.SPC
[Status 20:48:52 INFO] data for Y368 transferred to science data processing
[Tidy 20:48:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:48:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:48:52 INFO] resetting WatchDogTimer
[Status 20:48:52 INFO] Starting Set [AERI set: name Z368, 6 scans, 0 angle, D16300 command]
[Ingest 20:48:52 INFO] Sending XML status message
[Status 20:48:52 INFO] Mirror angle: 0
[Mirror 20:48:53 INFO] rotating to position Z
[Status 20:48:53 INFO] .SET file for ACQ96 ready
[Ingest 20:48:54 INFO] Starting acquisition
[Status 20:48:54 INFO] reading housekeeping
[Status 20:49:12 INFO] acquire complete
[Status 20:49:13 INFO] writing housekeeping
[Sequencer 20:49:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:49:13 INFO] incremented Z scene to 368 completed views
[Sequencer 20:49:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:49:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:49:13 INFO] incremented to [AERI set: name H369, 6 scans, 60 angle, D22500 command] set
[sigmove 20:49:13 INFO] Z368.SIG(18)
[sigmove 20:49:13 DEBUG] transformed Z368Ma.SPC -> Z368MA.SPC
[sigmove 20:49:13 DEBUG] transformed Z368Mb.SPC -> Z368MB.SPC
[sigmove 20:49:13 DEBUG] transformed Z368Mc.SPC -> Z368MC.SPC
[sigmove 20:49:13 DEBUG] transformed Z368Md.SPC -> Z368MD.SPC
[sigmove 20:49:13 DEBUG] transformed Z368Me.SPC -> Z368ME.SPC
[sigmove 20:49:13 DEBUG] transformed Z368Mf.SPC -> Z368MF.SPC
[Status 20:49:13 INFO] data for Z368 transferred to science data processing
[Tidy 20:49:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:49:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:49:13 INFO] resetting WatchDogTimer
[Status 20:49:13 INFO] Starting Set [AERI set: name H369, 6 scans, 60 angle, D22500 command]
[Ingest 20:49:13 INFO] Sending XML status message
[Status 20:49:13 INFO] Mirror angle: 60
[Mirror 20:49:14 INFO] rotating to position H
[Status 20:49:15 INFO] .SET file for ACQ96 ready
[Ingest 20:49:15 INFO] Starting acquisition
[Status 20:49:16 INFO] reading housekeeping
[Status 20:49:33 INFO] acquire complete
[Status 20:49:34 INFO] writing housekeeping
[Sequencer 20:49:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:49:34 INFO] incremented H scene to 369 completed views
[Sequencer 20:49:34 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:49:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:49:34 INFO] incremented to [AERI set: name A369, 6 scans, 120 angle, D28300 command] set
[sigmove 20:49:34 INFO] H369.SIG(18)
[sigmove 20:49:34 DEBUG] transformed H369Ma.SPC -> H369MA.SPC
[sigmove 20:49:34 DEBUG] transformed H369Mb.SPC -> H369MB.SPC
[sigmove 20:49:34 DEBUG] transformed H369Mc.SPC -> H369MC.SPC
[sigmove 20:49:34 DEBUG] transformed H369Md.SPC -> H369MD.SPC
[sigmove 20:49:34 DEBUG] transformed H369Me.SPC -> H369ME.SPC
[sigmove 20:49:34 DEBUG] transformed H369Mf.SPC -> H369MF.SPC
[Status 20:49:34 INFO] data for H369 transferred to science data processing
[Tidy 20:49:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:49:34 INFO] A367.FIN(19),H367.FIN(19),S367.FIN(19),T367.FIN(19),U367.FIN(19),V367.FIN(19),W367.FIN(19),X367.FIN(19),Y367.FIN(19),Z367.FIN(19),A368.FIN(19),H368.FIN(19),S368.FIN(19),T368.FIN(19),U368.FIN(19),V368.FIN(19),W368.FIN(19),X368.FIN(19),Y368.FIN(19),Z368.FIN(19)
[sigmove 20:49:34 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:49:34 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:49:41 DEBUG] done zipping
[WatchDog 20:49:41 INFO] resetting WatchDogTimer
[Status 20:49:42 INFO] Starting Set [AERI set: name A369, 6 scans, 120 angle, D28300 command]
[Ingest 20:49:42 INFO] Sending XML status message
[Status 20:49:42 INFO] Mirror angle: 120
[Mirror 20:49:42 INFO] rotating to position A
[Status 20:49:43 INFO] .SET file for ACQ96 ready
[Ingest 20:49:44 INFO] Starting acquisition
[Status 20:49:44 INFO] reading housekeeping
[Status 20:50:01 INFO] acquire complete
[Status 20:50:02 INFO] writing housekeeping
[Sequencer 20:50:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:50:02 INFO] incremented A scene to 369 completed views
[Sequencer 20:50:02 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:50:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:50:02 INFO] incremented to [AERI set: name S369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:50:02 INFO] A369.SIG(18)
[sigmove 20:50:02 DEBUG] transformed A369Ma.SPC -> A369MA.SPC
[sigmove 20:50:02 DEBUG] transformed A369Mb.SPC -> A369MB.SPC
[sigmove 20:50:02 DEBUG] transformed A369Mc.SPC -> A369MC.SPC
[sigmove 20:50:02 DEBUG] transformed A369Md.SPC -> A369MD.SPC
[sigmove 20:50:02 DEBUG] transformed A369Me.SPC -> A369ME.SPC
[sigmove 20:50:02 DEBUG] transformed A369Mf.SPC -> A369MF.SPC
[Status 20:50:02 INFO] data for A369 transferred to science data processing
[Tidy 20:50:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:50:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:50:02 INFO] resetting WatchDogTimer
[Status 20:50:03 INFO] Starting Set [AERI set: name S369, 6 scans, 0 angle, D16300 command]
[Ingest 20:50:03 INFO] Sending XML status message
[Status 20:50:03 INFO] Mirror angle: 0
[Mirror 20:50:03 INFO] rotating to position S
[Status 20:50:05 INFO] .SET file for ACQ96 ready
[Ingest 20:50:05 INFO] Starting acquisition
[Status 20:50:06 INFO] reading housekeeping
[Status 20:50:24 INFO] acquire complete
[Status 20:50:25 INFO] writing housekeeping
[Sequencer 20:50:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:50:25 INFO] incremented S scene to 369 completed views
[Sequencer 20:50:25 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:50:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:50:25 INFO] incremented to [AERI set: name T369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:50:25 INFO] S369.SIG(18)
[sigmove 20:50:25 DEBUG] transformed S369Ma.SPC -> S369MA.SPC
[sigmove 20:50:25 DEBUG] transformed S369Mb.SPC -> S369MB.SPC
[sigmove 20:50:25 DEBUG] transformed S369Mc.SPC -> S369MC.SPC
[sigmove 20:50:25 DEBUG] transformed S369Md.SPC -> S369MD.SPC
[sigmove 20:50:25 DEBUG] transformed S369Me.SPC -> S369ME.SPC
[sigmove 20:50:25 DEBUG] transformed S369Mf.SPC -> S369MF.SPC
[Status 20:50:25 INFO] data for S369 transferred to science data processing
[Tidy 20:50:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:50:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:50:25 INFO] resetting WatchDogTimer
[Status 20:50:26 INFO] Starting Set [AERI set: name T369, 6 scans, 0 angle, D16300 command]
[Ingest 20:50:26 INFO] Sending XML status message
[Status 20:50:26 INFO] Mirror angle: 0
[Mirror 20:50:26 INFO] rotating to position T
[Status 20:50:27 INFO] .SET file for ACQ96 ready
[Ingest 20:50:27 INFO] Starting acquisition
[Status 20:50:27 INFO] reading housekeeping
[Status 20:50:45 INFO] acquire complete
[Status 20:50:46 INFO] writing housekeeping
[Sequencer 20:50:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:50:46 INFO] incremented T scene to 369 completed views
[Sequencer 20:50:46 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:50:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:50:46 INFO] incremented to [AERI set: name U369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:50:46 INFO] T369.SIG(18)
[sigmove 20:50:46 DEBUG] transformed T369Ma.SPC -> T369MA.SPC
[sigmove 20:50:46 DEBUG] transformed T369Mb.SPC -> T369MB.SPC
[sigmove 20:50:46 DEBUG] transformed T369Mc.SPC -> T369MC.SPC
[sigmove 20:50:46 DEBUG] transformed T369Md.SPC -> T369MD.SPC
[sigmove 20:50:46 DEBUG] transformed T369Me.SPC -> T369ME.SPC
[sigmove 20:50:46 DEBUG] transformed T369Mf.SPC -> T369MF.SPC
[Status 20:50:46 INFO] data for T369 transferred to science data processing
[Tidy 20:50:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:50:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:50:46 INFO] resetting WatchDogTimer
[Status 20:50:47 INFO] Starting Set [AERI set: name U369, 6 scans, 0 angle, D16300 command]
[Ingest 20:50:47 INFO] Sending XML status message
[Status 20:50:47 INFO] Mirror angle: 0
[Mirror 20:50:47 INFO] rotating to position U
[Status 20:50:48 INFO] .SET file for ACQ96 ready
[Ingest 20:50:48 INFO] Starting acquisition
[Status 20:50:48 INFO] reading housekeeping
[Status 20:51:06 INFO] acquire complete
[Status 20:51:07 INFO] writing housekeeping
[Sequencer 20:51:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:51:07 INFO] incremented U scene to 369 completed views
[Sequencer 20:51:07 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:51:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:51:07 INFO] incremented to [AERI set: name V369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:51:07 INFO] U369.SIG(18)
[sigmove 20:51:07 DEBUG] transformed U369Ma.SPC -> U369MA.SPC
[sigmove 20:51:07 DEBUG] transformed U369Mb.SPC -> U369MB.SPC
[sigmove 20:51:07 DEBUG] transformed U369Mc.SPC -> U369MC.SPC
[sigmove 20:51:07 DEBUG] transformed U369Md.SPC -> U369MD.SPC
[sigmove 20:51:07 DEBUG] transformed U369Me.SPC -> U369ME.SPC
[sigmove 20:51:07 DEBUG] transformed U369Mf.SPC -> U369MF.SPC
[Status 20:51:07 INFO] data for U369 transferred to science data processing
[Tidy 20:51:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:51:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:51:07 INFO] resetting WatchDogTimer
[Status 20:51:08 INFO] Starting Set [AERI set: name V369, 6 scans, 0 angle, D16300 command]
[Ingest 20:51:08 INFO] Sending XML status message
[Status 20:51:08 INFO] Mirror angle: 0
[Mirror 20:51:08 INFO] rotating to position V
[Status 20:51:09 INFO] .SET file for ACQ96 ready
[Ingest 20:51:09 INFO] Starting acquisition
[Status 20:51:10 INFO] reading housekeeping
[Status 20:51:28 INFO] acquire complete
[Status 20:51:29 INFO] writing housekeeping
[Sequencer 20:51:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:51:29 INFO] incremented V scene to 369 completed views
[Sequencer 20:51:29 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:51:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:51:29 INFO] incremented to [AERI set: name W369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:51:29 INFO] V369.SIG(18)
[sigmove 20:51:29 DEBUG] transformed V369Ma.SPC -> V369MA.SPC
[sigmove 20:51:29 DEBUG] transformed V369Mb.SPC -> V369MB.SPC
[sigmove 20:51:29 DEBUG] transformed V369Mc.SPC -> V369MC.SPC
[sigmove 20:51:29 DEBUG] transformed V369Md.SPC -> V369MD.SPC
[sigmove 20:51:29 DEBUG] transformed V369Me.SPC -> V369ME.SPC
[sigmove 20:51:29 DEBUG] transformed V369Mf.SPC -> V369MF.SPC
[Status 20:51:29 INFO] data for V369 transferred to science data processing
[Tidy 20:51:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:51:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:51:29 INFO] resetting WatchDogTimer
[Status 20:51:29 INFO] Starting Set [AERI set: name W369, 6 scans, 0 angle, D16300 command]
[Ingest 20:51:29 INFO] Sending XML status message
[Status 20:51:29 INFO] Mirror angle: 0
[Mirror 20:51:30 INFO] rotating to position W
[Status 20:51:30 INFO] .SET file for ACQ96 ready
[Ingest 20:51:31 INFO] Starting acquisition
[Status 20:51:31 INFO] reading housekeeping
[Status 20:51:49 INFO] acquire complete
[Status 20:51:50 INFO] writing housekeeping
[Sequencer 20:51:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:51:50 INFO] incremented W scene to 369 completed views
[Sequencer 20:51:50 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:51:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:51:50 INFO] incremented to [AERI set: name X369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:51:50 INFO] W369.SIG(18)
[sigmove 20:51:50 DEBUG] transformed W369Ma.SPC -> W369MA.SPC
[sigmove 20:51:50 DEBUG] transformed W369Mb.SPC -> W369MB.SPC
[sigmove 20:51:50 DEBUG] transformed W369Mc.SPC -> W369MC.SPC
[sigmove 20:51:50 DEBUG] transformed W369Md.SPC -> W369MD.SPC
[sigmove 20:51:50 DEBUG] transformed W369Me.SPC -> W369ME.SPC
[sigmove 20:51:50 DEBUG] transformed W369Mf.SPC -> W369MF.SPC
[Status 20:51:50 INFO] data for W369 transferred to science data processing
[Tidy 20:51:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:51:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:51:50 INFO] resetting WatchDogTimer
[Status 20:51:50 INFO] Starting Set [AERI set: name X369, 6 scans, 0 angle, D16300 command]
[Ingest 20:51:50 INFO] Sending XML status message
[Status 20:51:51 INFO] Mirror angle: 0
[Mirror 20:51:51 INFO] rotating to position X
[Status 20:51:52 INFO] .SET file for ACQ96 ready
[Ingest 20:51:52 INFO] Starting acquisition
[Status 20:51:52 INFO] reading housekeeping
[Status 20:52:10 INFO] acquire complete
[Status 20:52:11 INFO] writing housekeeping
[Sequencer 20:52:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:52:11 INFO] incremented X scene to 369 completed views
[Sequencer 20:52:11 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:52:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:52:11 INFO] incremented to [AERI set: name Y369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:52:11 INFO] X369.SIG(18)
[sigmove 20:52:11 DEBUG] transformed X369Ma.SPC -> X369MA.SPC
[sigmove 20:52:11 DEBUG] transformed X369Mb.SPC -> X369MB.SPC
[sigmove 20:52:11 DEBUG] transformed X369Mc.SPC -> X369MC.SPC
[sigmove 20:52:11 DEBUG] transformed X369Md.SPC -> X369MD.SPC
[sigmove 20:52:11 DEBUG] transformed X369Me.SPC -> X369ME.SPC
[sigmove 20:52:11 DEBUG] transformed X369Mf.SPC -> X369MF.SPC
[Status 20:52:11 INFO] data for X369 transferred to science data processing
[Tidy 20:52:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:52:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:52:11 INFO] resetting WatchDogTimer
[Status 20:52:12 INFO] Starting Set [AERI set: name Y369, 6 scans, 0 angle, D16300 command]
[Ingest 20:52:12 INFO] Sending XML status message
[Status 20:52:12 INFO] Mirror angle: 0
[Mirror 20:52:12 INFO] rotating to position Y
[Status 20:52:13 INFO] .SET file for ACQ96 ready
[Ingest 20:52:13 INFO] Starting acquisition
[Status 20:52:14 INFO] reading housekeeping
[Status 20:52:31 INFO] acquire complete
[Status 20:52:33 INFO] writing housekeeping
[Sequencer 20:52:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:52:33 INFO] incremented Y scene to 369 completed views
[Sequencer 20:52:33 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:52:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:52:33 INFO] incremented to [AERI set: name Z369, 6 scans, 0 angle, D16300 command] set
[sigmove 20:52:33 INFO] Y369.SIG(18)
[sigmove 20:52:33 DEBUG] transformed Y369Ma.SPC -> Y369MA.SPC
[sigmove 20:52:33 DEBUG] transformed Y369Mb.SPC -> Y369MB.SPC
[sigmove 20:52:33 DEBUG] transformed Y369Mc.SPC -> Y369MC.SPC
[sigmove 20:52:33 DEBUG] transformed Y369Md.SPC -> Y369MD.SPC
[sigmove 20:52:33 DEBUG] transformed Y369Me.SPC -> Y369ME.SPC
[sigmove 20:52:33 DEBUG] transformed Y369Mf.SPC -> Y369MF.SPC
[Status 20:52:33 INFO] data for Y369 transferred to science data processing
[Tidy 20:52:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:52:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:52:33 INFO] resetting WatchDogTimer
[Status 20:52:33 INFO] Starting Set [AERI set: name Z369, 6 scans, 0 angle, D16300 command]
[Ingest 20:52:33 INFO] Sending XML status message
[Status 20:52:33 INFO] Mirror angle: 0
[Mirror 20:52:34 INFO] rotating to position Z
[Status 20:52:34 INFO] .SET file for ACQ96 ready
[Ingest 20:52:35 INFO] Starting acquisition
[Status 20:52:35 INFO] reading housekeeping
[Status 20:52:53 INFO] acquire complete
[Status 20:52:54 INFO] writing housekeeping
[Sequencer 20:52:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:52:54 INFO] incremented Z scene to 369 completed views
[Sequencer 20:52:54 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:52:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:52:54 INFO] incremented to [AERI set: name A370, 6 scans, 120 angle, D28300 command] set
[sigmove 20:52:54 INFO] Z369.SIG(18)
[sigmove 20:52:54 DEBUG] transformed Z369Ma.SPC -> Z369MA.SPC
[sigmove 20:52:54 DEBUG] transformed Z369Mb.SPC -> Z369MB.SPC
[sigmove 20:52:54 DEBUG] transformed Z369Mc.SPC -> Z369MC.SPC
[sigmove 20:52:54 DEBUG] transformed Z369Md.SPC -> Z369MD.SPC
[sigmove 20:52:54 DEBUG] transformed Z369Me.SPC -> Z369ME.SPC
[sigmove 20:52:54 DEBUG] transformed Z369Mf.SPC -> Z369MF.SPC
[Status 20:52:54 INFO] data for Z369 transferred to science data processing
[Tidy 20:52:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:52:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:52:54 INFO] resetting WatchDogTimer
[Status 20:52:54 INFO] Starting Set [AERI set: name A370, 6 scans, 120 angle, D28300 command]
[Ingest 20:52:54 INFO] Sending XML status message
[Status 20:52:54 INFO] Mirror angle: 120
[Mirror 20:52:55 INFO] rotating to position A
[Status 20:52:57 INFO] .SET file for ACQ96 ready
[Ingest 20:52:57 INFO] Starting acquisition
[Status 20:52:57 INFO] reading housekeeping
[Status 20:53:15 INFO] acquire complete
[Status 20:53:16 INFO] writing housekeeping
[Sequencer 20:53:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:53:16 INFO] incremented A scene to 370 completed views
[Sequencer 20:53:16 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:53:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:53:16 INFO] incremented to [AERI set: name H370, 6 scans, 60 angle, D22500 command] set
[sigmove 20:53:16 INFO] A370.SIG(18)
[sigmove 20:53:16 DEBUG] transformed A370Ma.SPC -> A370MA.SPC
[sigmove 20:53:16 DEBUG] transformed A370Mb.SPC -> A370MB.SPC
[sigmove 20:53:16 DEBUG] transformed A370Mc.SPC -> A370MC.SPC
[sigmove 20:53:16 DEBUG] transformed A370Md.SPC -> A370MD.SPC
[sigmove 20:53:16 DEBUG] transformed A370Me.SPC -> A370ME.SPC
[sigmove 20:53:16 DEBUG] transformed A370Mf.SPC -> A370MF.SPC
[Status 20:53:16 INFO] data for A370 transferred to science data processing
[Tidy 20:53:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:53:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:53:16 INFO] resetting WatchDogTimer
[Status 20:53:17 INFO] Starting Set [AERI set: name H370, 6 scans, 60 angle, D22500 command]
[Ingest 20:53:17 INFO] Sending XML status message
[Status 20:53:17 INFO] Mirror angle: 60
[Mirror 20:53:17 INFO] rotating to position H
[Status 20:53:18 INFO] .SET file for ACQ96 ready
[Ingest 20:53:19 INFO] Starting acquisition
[Status 20:53:19 INFO] reading housekeeping
[Status 20:53:37 INFO] acquire complete
[Status 20:53:38 INFO] writing housekeeping
[Sequencer 20:53:38 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:53:38 INFO] incremented H scene to 370 completed views
[Sequencer 20:53:38 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:53:38 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:53:38 INFO] incremented to [AERI set: name S370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:53:38 INFO] H370.SIG(18)
[sigmove 20:53:38 DEBUG] transformed H370Ma.SPC -> H370MA.SPC
[sigmove 20:53:38 DEBUG] transformed H370Mb.SPC -> H370MB.SPC
[sigmove 20:53:38 DEBUG] transformed H370Mc.SPC -> H370MC.SPC
[sigmove 20:53:38 DEBUG] transformed H370Md.SPC -> H370MD.SPC
[sigmove 20:53:38 DEBUG] transformed H370Me.SPC -> H370ME.SPC
[sigmove 20:53:38 DEBUG] transformed H370Mf.SPC -> H370MF.SPC
[Status 20:53:38 INFO] data for H370 transferred to science data processing
[Tidy 20:53:38 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:53:38 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:53:38 INFO] resetting WatchDogTimer
[Status 20:53:38 INFO] Starting Set [AERI set: name S370, 6 scans, 0 angle, D16300 command]
[Ingest 20:53:38 INFO] Sending XML status message
[Status 20:53:38 INFO] Mirror angle: 0
[Mirror 20:53:39 INFO] rotating to position S
[Status 20:53:40 INFO] .SET file for ACQ96 ready
[Ingest 20:53:40 INFO] Starting acquisition
[Status 20:53:41 INFO] reading housekeeping
[Status 20:53:58 INFO] acquire complete
[Status 20:53:59 INFO] writing housekeeping
[Sequencer 20:53:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:53:59 INFO] incremented S scene to 370 completed views
[Sequencer 20:53:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:53:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:53:59 INFO] incremented to [AERI set: name T370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:53:59 INFO] S370.SIG(18)
[sigmove 20:53:59 DEBUG] transformed S370Ma.SPC -> S370MA.SPC
[sigmove 20:53:59 DEBUG] transformed S370Mb.SPC -> S370MB.SPC
[sigmove 20:53:59 DEBUG] transformed S370Mc.SPC -> S370MC.SPC
[sigmove 20:53:59 DEBUG] transformed S370Md.SPC -> S370MD.SPC
[sigmove 20:53:59 DEBUG] transformed S370Me.SPC -> S370ME.SPC
[sigmove 20:53:59 DEBUG] transformed S370Mf.SPC -> S370MF.SPC
[Status 20:53:59 INFO] data for S370 transferred to science data processing
[Tidy 20:53:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:53:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:53:59 INFO] resetting WatchDogTimer
[Status 20:53:59 INFO] Starting Set [AERI set: name T370, 6 scans, 0 angle, D16300 command]
[Ingest 20:53:59 INFO] Sending XML status message
[Status 20:53:59 INFO] Mirror angle: 0
[Mirror 20:54:00 INFO] rotating to position T
[Status 20:54:00 INFO] .SET file for ACQ96 ready
[Ingest 20:54:01 INFO] Starting acquisition
[Status 20:54:01 INFO] reading housekeeping
[Status 20:54:19 INFO] acquire complete
[Status 20:54:20 INFO] writing housekeeping
[Sequencer 20:54:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:54:20 INFO] incremented T scene to 370 completed views
[Sequencer 20:54:20 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:54:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:54:20 INFO] incremented to [AERI set: name U370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:54:20 INFO] T370.SIG(18)
[sigmove 20:54:20 DEBUG] transformed T370Ma.SPC -> T370MA.SPC
[sigmove 20:54:20 DEBUG] transformed T370Mb.SPC -> T370MB.SPC
[sigmove 20:54:20 DEBUG] transformed T370Mc.SPC -> T370MC.SPC
[sigmove 20:54:20 DEBUG] transformed T370Md.SPC -> T370MD.SPC
[sigmove 20:54:20 DEBUG] transformed T370Me.SPC -> T370ME.SPC
[sigmove 20:54:20 DEBUG] transformed T370Mf.SPC -> T370MF.SPC
[Status 20:54:20 INFO] data for T370 transferred to science data processing
[Tidy 20:54:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:54:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:54:20 INFO] resetting WatchDogTimer
[Status 20:54:21 INFO] Starting Set [AERI set: name U370, 6 scans, 0 angle, D16300 command]
[Ingest 20:54:21 INFO] Sending XML status message
[Status 20:54:21 INFO] Mirror angle: 0
[Mirror 20:54:21 INFO] rotating to position U
[Status 20:54:22 INFO] .SET file for ACQ96 ready
[Ingest 20:54:22 INFO] Starting acquisition
[Status 20:54:23 INFO] reading housekeeping
[Status 20:54:40 INFO] acquire complete
[Status 20:54:42 INFO] writing housekeeping
[Sequencer 20:54:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:54:42 INFO] incremented U scene to 370 completed views
[Sequencer 20:54:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:54:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:54:42 INFO] incremented to [AERI set: name V370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:54:42 INFO] U370.SIG(18)
[sigmove 20:54:42 DEBUG] transformed U370Ma.SPC -> U370MA.SPC
[sigmove 20:54:42 DEBUG] transformed U370Mb.SPC -> U370MB.SPC
[sigmove 20:54:42 DEBUG] transformed U370Mc.SPC -> U370MC.SPC
[sigmove 20:54:42 DEBUG] transformed U370Md.SPC -> U370MD.SPC
[sigmove 20:54:42 DEBUG] transformed U370Me.SPC -> U370ME.SPC
[sigmove 20:54:42 DEBUG] transformed U370Mf.SPC -> U370MF.SPC
[Status 20:54:42 INFO] data for U370 transferred to science data processing
[Tidy 20:54:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:54:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:54:42 INFO] resetting WatchDogTimer
[Status 20:54:42 INFO] Starting Set [AERI set: name V370, 6 scans, 0 angle, D16300 command]
[Ingest 20:54:42 INFO] Sending XML status message
[Status 20:54:42 INFO] Mirror angle: 0
[Mirror 20:54:43 INFO] rotating to position V
[Status 20:54:43 INFO] .SET file for ACQ96 ready
[Ingest 20:54:44 INFO] Starting acquisition
[Status 20:54:44 INFO] reading housekeeping
[Status 20:55:02 INFO] acquire complete
[Status 20:55:03 INFO] writing housekeeping
[Sequencer 20:55:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:55:03 INFO] incremented V scene to 370 completed views
[Sequencer 20:55:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:55:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:55:03 INFO] incremented to [AERI set: name W370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:55:03 INFO] V370.SIG(18)
[sigmove 20:55:03 DEBUG] transformed V370Ma.SPC -> V370MA.SPC
[sigmove 20:55:03 DEBUG] transformed V370Mb.SPC -> V370MB.SPC
[sigmove 20:55:03 DEBUG] transformed V370Mc.SPC -> V370MC.SPC
[sigmove 20:55:03 DEBUG] transformed V370Md.SPC -> V370MD.SPC
[sigmove 20:55:03 DEBUG] transformed V370Me.SPC -> V370ME.SPC
[sigmove 20:55:03 DEBUG] transformed V370Mf.SPC -> V370MF.SPC
[Status 20:55:03 INFO] data for V370 transferred to science data processing
[Tidy 20:55:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:55:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:55:03 INFO] resetting WatchDogTimer
[Status 20:55:03 INFO] Starting Set [AERI set: name W370, 6 scans, 0 angle, D16300 command]
[Ingest 20:55:03 INFO] Sending XML status message
[Status 20:55:03 INFO] Mirror angle: 0
[Mirror 20:55:04 INFO] rotating to position W
[Status 20:55:04 INFO] .SET file for ACQ96 ready
[Ingest 20:55:05 INFO] Starting acquisition
[Status 20:55:05 INFO] reading housekeeping
[Status 20:55:23 INFO] acquire complete
[Status 20:55:24 INFO] writing housekeeping
[Sequencer 20:55:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:55:24 INFO] incremented W scene to 370 completed views
[Sequencer 20:55:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:55:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:55:24 INFO] incremented to [AERI set: name X370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:55:24 INFO] W370.SIG(18)
[sigmove 20:55:24 DEBUG] transformed W370Ma.SPC -> W370MA.SPC
[sigmove 20:55:24 DEBUG] transformed W370Mb.SPC -> W370MB.SPC
[sigmove 20:55:24 DEBUG] transformed W370Mc.SPC -> W370MC.SPC
[sigmove 20:55:24 DEBUG] transformed W370Md.SPC -> W370MD.SPC
[sigmove 20:55:24 DEBUG] transformed W370Me.SPC -> W370ME.SPC
[sigmove 20:55:24 DEBUG] transformed W370Mf.SPC -> W370MF.SPC
[Status 20:55:24 INFO] data for W370 transferred to science data processing
[Tidy 20:55:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:55:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:55:24 INFO] resetting WatchDogTimer
[Status 20:55:25 INFO] Starting Set [AERI set: name X370, 6 scans, 0 angle, D16300 command]
[Ingest 20:55:25 INFO] Sending XML status message
[Status 20:55:25 INFO] Mirror angle: 0
[Mirror 20:55:25 INFO] rotating to position X
[Status 20:55:26 INFO] .SET file for ACQ96 ready
[Ingest 20:55:26 INFO] Starting acquisition
[Status 20:55:27 INFO] reading housekeeping
[Status 20:55:44 INFO] acquire complete
[Status 20:55:46 INFO] writing housekeeping
[Sequencer 20:55:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:55:46 INFO] incremented X scene to 370 completed views
[Sequencer 20:55:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:55:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:55:46 INFO] incremented to [AERI set: name Y370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:55:46 INFO] X370.SIG(18)
[sigmove 20:55:46 DEBUG] transformed X370Ma.SPC -> X370MA.SPC
[sigmove 20:55:46 DEBUG] transformed X370Mb.SPC -> X370MB.SPC
[sigmove 20:55:46 DEBUG] transformed X370Mc.SPC -> X370MC.SPC
[sigmove 20:55:46 DEBUG] transformed X370Md.SPC -> X370MD.SPC
[sigmove 20:55:46 DEBUG] transformed X370Me.SPC -> X370ME.SPC
[sigmove 20:55:46 DEBUG] transformed X370Mf.SPC -> X370MF.SPC
[Status 20:55:46 INFO] data for X370 transferred to science data processing
[Tidy 20:55:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:55:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:55:46 INFO] resetting WatchDogTimer
[Status 20:55:46 INFO] Starting Set [AERI set: name Y370, 6 scans, 0 angle, D16300 command]
[Ingest 20:55:46 INFO] Sending XML status message
[Status 20:55:46 INFO] Mirror angle: 0
[Mirror 20:55:46 INFO] rotating to position Y
[Status 20:55:47 INFO] .SET file for ACQ96 ready
[Ingest 20:55:47 INFO] Starting acquisition
[Status 20:55:48 INFO] reading housekeeping
[Status 20:56:06 INFO] acquire complete
[Status 20:56:07 INFO] writing housekeeping
[Sequencer 20:56:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:56:07 INFO] incremented Y scene to 370 completed views
[Sequencer 20:56:07 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:56:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:56:07 INFO] incremented to [AERI set: name Z370, 6 scans, 0 angle, D16300 command] set
[sigmove 20:56:07 INFO] Y370.SIG(18)
[sigmove 20:56:07 DEBUG] transformed Y370Ma.SPC -> Y370MA.SPC
[sigmove 20:56:07 DEBUG] transformed Y370Mb.SPC -> Y370MB.SPC
[sigmove 20:56:07 DEBUG] transformed Y370Mc.SPC -> Y370MC.SPC
[sigmove 20:56:07 DEBUG] transformed Y370Md.SPC -> Y370MD.SPC
[sigmove 20:56:07 DEBUG] transformed Y370Me.SPC -> Y370ME.SPC
[sigmove 20:56:07 DEBUG] transformed Y370Mf.SPC -> Y370MF.SPC
[Status 20:56:07 INFO] data for Y370 transferred to science data processing
[Tidy 20:56:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:56:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:56:07 INFO] resetting WatchDogTimer
[Status 20:56:07 INFO] Starting Set [AERI set: name Z370, 6 scans, 0 angle, D16300 command]
[Ingest 20:56:07 INFO] Sending XML status message
[Status 20:56:07 INFO] Mirror angle: 0
[Mirror 20:56:08 INFO] rotating to position Z
[Status 20:56:08 INFO] .SET file for ACQ96 ready
[Ingest 20:56:09 INFO] Starting acquisition
[Status 20:56:09 INFO] reading housekeeping
[Status 20:56:27 INFO] acquire complete
[Status 20:56:28 INFO] writing housekeeping
[Sequencer 20:56:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:56:28 INFO] incremented Z scene to 370 completed views
[Sequencer 20:56:28 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 20:56:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:56:28 INFO] incremented to [AERI set: name H371, 6 scans, 60 angle, D22500 command] set
[sigmove 20:56:28 INFO] Z370.SIG(18)
[sigmove 20:56:28 DEBUG] transformed Z370Ma.SPC -> Z370MA.SPC
[sigmove 20:56:28 DEBUG] transformed Z370Mb.SPC -> Z370MB.SPC
[sigmove 20:56:28 DEBUG] transformed Z370Mc.SPC -> Z370MC.SPC
[sigmove 20:56:28 DEBUG] transformed Z370Md.SPC -> Z370MD.SPC
[sigmove 20:56:28 DEBUG] transformed Z370Me.SPC -> Z370ME.SPC
[sigmove 20:56:28 DEBUG] transformed Z370Mf.SPC -> Z370MF.SPC
[Status 20:56:28 INFO] data for Z370 transferred to science data processing
[Tidy 20:56:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:56:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:56:28 INFO] resetting WatchDogTimer
[Status 20:56:29 INFO] Starting Set [AERI set: name H371, 6 scans, 60 angle, D22500 command]
[Ingest 20:56:29 INFO] Sending XML status message
[Status 20:56:29 INFO] Mirror angle: 60
[Mirror 20:56:29 INFO] rotating to position H
[Status 20:56:30 INFO] .SET file for ACQ96 ready
[Ingest 20:56:31 INFO] Starting acquisition
[Status 20:56:31 INFO] reading housekeeping
[Status 20:56:48 INFO] acquire complete
[Status 20:56:50 INFO] writing housekeeping
[Sequencer 20:56:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:56:50 INFO] incremented H scene to 371 completed views
[Sequencer 20:56:50 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 20:56:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:56:50 INFO] incremented to [AERI set: name A371, 6 scans, 120 angle, D28300 command] set
[sigmove 20:56:50 INFO] H371.SIG(18)
[sigmove 20:56:50 DEBUG] transformed H371Ma.SPC -> H371MA.SPC
[sigmove 20:56:50 DEBUG] transformed H371Mb.SPC -> H371MB.SPC
[sigmove 20:56:50 DEBUG] transformed H371Mc.SPC -> H371MC.SPC
[sigmove 20:56:50 DEBUG] transformed H371Md.SPC -> H371MD.SPC
[sigmove 20:56:50 DEBUG] transformed H371Me.SPC -> H371ME.SPC
[sigmove 20:56:50 DEBUG] transformed H371Mf.SPC -> H371MF.SPC
[Status 20:56:50 INFO] data for H371 transferred to science data processing
[Tidy 20:56:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:56:50 INFO] A369.FIN(19),H369.FIN(19),S369.FIN(19),T369.FIN(19),U369.FIN(19),V369.FIN(19),W369.FIN(19),X369.FIN(19),Y369.FIN(19),Z369.FIN(19),A370.FIN(19),H370.FIN(19),S370.FIN(19),T370.FIN(19),U370.FIN(19),V370.FIN(19),W370.FIN(19),X370.FIN(19),Y370.FIN(19),Z370.FIN(19)
[sigmove 20:56:50 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:56:50 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 20:56:56 DEBUG] done zipping
[WatchDog 20:56:57 INFO] resetting WatchDogTimer
[Status 20:56:57 INFO] Starting Set [AERI set: name A371, 6 scans, 120 angle, D28300 command]
[Ingest 20:56:57 INFO] Sending XML status message
[Status 20:56:57 INFO] Mirror angle: 120
[Mirror 20:56:57 INFO] rotating to position A
[Status 20:56:59 INFO] .SET file for ACQ96 ready
[Ingest 20:56:59 INFO] Starting acquisition
[Status 20:56:59 INFO] reading housekeeping
[Status 20:57:17 INFO] acquire complete
[Status 20:57:19 INFO] writing housekeeping
[Sequencer 20:57:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:57:19 INFO] incremented A scene to 371 completed views
[Sequencer 20:57:19 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 20:57:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:57:19 INFO] incremented to [AERI set: name S371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:57:19 INFO] A371.SIG(18)
[sigmove 20:57:19 DEBUG] transformed A371Ma.SPC -> A371MA.SPC
[sigmove 20:57:19 DEBUG] transformed A371Mb.SPC -> A371MB.SPC
[sigmove 20:57:19 DEBUG] transformed A371Mc.SPC -> A371MC.SPC
[sigmove 20:57:19 DEBUG] transformed A371Md.SPC -> A371MD.SPC
[sigmove 20:57:19 DEBUG] transformed A371Me.SPC -> A371ME.SPC
[sigmove 20:57:19 DEBUG] transformed A371Mf.SPC -> A371MF.SPC
[Status 20:57:19 INFO] data for A371 transferred to science data processing
[Tidy 20:57:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:57:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:57:19 INFO] resetting WatchDogTimer
[Status 20:57:19 INFO] Starting Set [AERI set: name S371, 6 scans, 0 angle, D16300 command]
[Ingest 20:57:19 INFO] Sending XML status message
[Status 20:57:19 INFO] Mirror angle: 0
[Mirror 20:57:20 INFO] rotating to position S
[Status 20:57:21 INFO] .SET file for ACQ96 ready
[Ingest 20:57:22 INFO] Starting acquisition
[Status 20:57:22 INFO] reading housekeeping
[Status 20:57:40 INFO] acquire complete
[Status 20:57:41 INFO] writing housekeeping
[Sequencer 20:57:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:57:41 INFO] incremented S scene to 371 completed views
[Sequencer 20:57:41 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:57:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:57:41 INFO] incremented to [AERI set: name T371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:57:41 INFO] S371.SIG(18)
[sigmove 20:57:41 DEBUG] transformed S371Ma.SPC -> S371MA.SPC
[sigmove 20:57:41 DEBUG] transformed S371Mb.SPC -> S371MB.SPC
[sigmove 20:57:41 DEBUG] transformed S371Mc.SPC -> S371MC.SPC
[sigmove 20:57:41 DEBUG] transformed S371Md.SPC -> S371MD.SPC
[sigmove 20:57:41 DEBUG] transformed S371Me.SPC -> S371ME.SPC
[sigmove 20:57:41 DEBUG] transformed S371Mf.SPC -> S371MF.SPC
[Status 20:57:41 INFO] data for S371 transferred to science data processing
[Tidy 20:57:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:57:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:57:41 INFO] resetting WatchDogTimer
[Status 20:57:42 INFO] Starting Set [AERI set: name T371, 6 scans, 0 angle, D16300 command]
[Ingest 20:57:42 INFO] Sending XML status message
[Status 20:57:42 INFO] Mirror angle: 0
[Mirror 20:57:42 INFO] rotating to position T
[Status 20:57:43 INFO] .SET file for ACQ96 ready
[Ingest 20:57:43 INFO] Starting acquisition
[Status 20:57:43 INFO] reading housekeeping
[Status 20:58:01 INFO] acquire complete
[Status 20:58:03 INFO] writing housekeeping
[Sequencer 20:58:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:58:03 INFO] incremented T scene to 371 completed views
[Sequencer 20:58:03 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:58:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:58:03 INFO] incremented to [AERI set: name U371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:58:03 INFO] T371.SIG(18)
[sigmove 20:58:03 DEBUG] transformed T371Ma.SPC -> T371MA.SPC
[sigmove 20:58:03 DEBUG] transformed T371Mb.SPC -> T371MB.SPC
[sigmove 20:58:03 DEBUG] transformed T371Mc.SPC -> T371MC.SPC
[sigmove 20:58:03 DEBUG] transformed T371Md.SPC -> T371MD.SPC
[sigmove 20:58:03 DEBUG] transformed T371Me.SPC -> T371ME.SPC
[sigmove 20:58:03 DEBUG] transformed T371Mf.SPC -> T371MF.SPC
[Status 20:58:03 INFO] data for T371 transferred to science data processing
[Tidy 20:58:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:58:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:58:03 INFO] resetting WatchDogTimer
[Status 20:58:03 INFO] Starting Set [AERI set: name U371, 6 scans, 0 angle, D16300 command]
[Ingest 20:58:03 INFO] Sending XML status message
[Status 20:58:03 INFO] Mirror angle: 0
[Mirror 20:58:04 INFO] rotating to position U
[Status 20:58:04 INFO] .SET file for ACQ96 ready
[Ingest 20:58:05 INFO] Starting acquisition
[Status 20:58:05 INFO] reading housekeeping
[Status 20:58:23 INFO] acquire complete
[Status 20:58:24 INFO] writing housekeeping
[Sequencer 20:58:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:58:24 INFO] incremented U scene to 371 completed views
[Sequencer 20:58:24 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:58:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:58:24 INFO] incremented to [AERI set: name V371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:58:24 INFO] U371.SIG(18)
[sigmove 20:58:24 DEBUG] transformed U371Ma.SPC -> U371MA.SPC
[sigmove 20:58:24 DEBUG] transformed U371Mb.SPC -> U371MB.SPC
[sigmove 20:58:24 DEBUG] transformed U371Mc.SPC -> U371MC.SPC
[sigmove 20:58:24 DEBUG] transformed U371Md.SPC -> U371MD.SPC
[sigmove 20:58:24 DEBUG] transformed U371Me.SPC -> U371ME.SPC
[sigmove 20:58:24 DEBUG] transformed U371Mf.SPC -> U371MF.SPC
[Status 20:58:24 INFO] data for U371 transferred to science data processing
[Tidy 20:58:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:58:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:58:24 INFO] resetting WatchDogTimer
[Status 20:58:24 INFO] Starting Set [AERI set: name V371, 6 scans, 0 angle, D16300 command]
[Ingest 20:58:24 INFO] Sending XML status message
[Status 20:58:24 INFO] Mirror angle: 0
[Mirror 20:58:25 INFO] rotating to position V
[Status 20:58:25 INFO] .SET file for ACQ96 ready
[Ingest 20:58:26 INFO] Starting acquisition
[Status 20:58:26 INFO] reading housekeeping
[Status 20:58:44 INFO] acquire complete
[Status 20:58:45 INFO] writing housekeeping
[Sequencer 20:58:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:58:45 INFO] incremented V scene to 371 completed views
[Sequencer 20:58:45 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:58:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:58:45 INFO] incremented to [AERI set: name W371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:58:45 INFO] V371.SIG(18)
[sigmove 20:58:45 DEBUG] transformed V371Ma.SPC -> V371MA.SPC
[sigmove 20:58:45 DEBUG] transformed V371Mb.SPC -> V371MB.SPC
[sigmove 20:58:45 DEBUG] transformed V371Mc.SPC -> V371MC.SPC
[sigmove 20:58:45 DEBUG] transformed V371Md.SPC -> V371MD.SPC
[sigmove 20:58:45 DEBUG] transformed V371Me.SPC -> V371ME.SPC
[sigmove 20:58:45 DEBUG] transformed V371Mf.SPC -> V371MF.SPC
[Status 20:58:45 INFO] data for V371 transferred to science data processing
[Tidy 20:58:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:58:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:58:45 INFO] resetting WatchDogTimer
[Status 20:58:45 INFO] Starting Set [AERI set: name W371, 6 scans, 0 angle, D16300 command]
[Ingest 20:58:45 INFO] Sending XML status message
[Status 20:58:45 INFO] Mirror angle: 0
[Mirror 20:58:46 INFO] rotating to position W
[Status 20:58:46 INFO] .SET file for ACQ96 ready
[Ingest 20:58:47 INFO] Starting acquisition
[Status 20:58:47 INFO] reading housekeeping
[Status 20:59:05 INFO] acquire complete
[Status 20:59:06 INFO] writing housekeeping
[Sequencer 20:59:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:59:06 INFO] incremented W scene to 371 completed views
[Sequencer 20:59:06 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:59:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:59:06 INFO] incremented to [AERI set: name X371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:59:06 INFO] W371.SIG(18)
[sigmove 20:59:06 DEBUG] transformed W371Ma.SPC -> W371MA.SPC
[sigmove 20:59:06 DEBUG] transformed W371Mb.SPC -> W371MB.SPC
[sigmove 20:59:06 DEBUG] transformed W371Mc.SPC -> W371MC.SPC
[sigmove 20:59:06 DEBUG] transformed W371Md.SPC -> W371MD.SPC
[sigmove 20:59:06 DEBUG] transformed W371Me.SPC -> W371ME.SPC
[sigmove 20:59:06 DEBUG] transformed W371Mf.SPC -> W371MF.SPC
[Status 20:59:06 INFO] data for W371 transferred to science data processing
[Tidy 20:59:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:59:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:59:06 INFO] resetting WatchDogTimer
[Status 20:59:07 INFO] Starting Set [AERI set: name X371, 6 scans, 0 angle, D16300 command]
[Ingest 20:59:07 INFO] Sending XML status message
[Status 20:59:07 INFO] Mirror angle: 0
[Mirror 20:59:07 INFO] rotating to position X
[Status 20:59:08 INFO] .SET file for ACQ96 ready
[Ingest 20:59:08 INFO] Starting acquisition
[Status 20:59:09 INFO] reading housekeeping
[Status 20:59:26 INFO] acquire complete
[Status 20:59:28 INFO] writing housekeeping
[Sequencer 20:59:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:59:28 INFO] incremented X scene to 371 completed views
[Sequencer 20:59:28 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:59:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:59:28 INFO] incremented to [AERI set: name Y371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:59:28 INFO] X371.SIG(18)
[sigmove 20:59:28 DEBUG] transformed X371Ma.SPC -> X371MA.SPC
[sigmove 20:59:28 DEBUG] transformed X371Mb.SPC -> X371MB.SPC
[sigmove 20:59:28 DEBUG] transformed X371Mc.SPC -> X371MC.SPC
[sigmove 20:59:28 DEBUG] transformed X371Md.SPC -> X371MD.SPC
[sigmove 20:59:28 DEBUG] transformed X371Me.SPC -> X371ME.SPC
[sigmove 20:59:28 DEBUG] transformed X371Mf.SPC -> X371MF.SPC
[Status 20:59:28 INFO] data for X371 transferred to science data processing
[Tidy 20:59:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:59:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:59:28 INFO] resetting WatchDogTimer
[Status 20:59:28 INFO] Starting Set [AERI set: name Y371, 6 scans, 0 angle, D16300 command]
[Ingest 20:59:28 INFO] Sending XML status message
[Status 20:59:28 INFO] Mirror angle: 0
[Mirror 20:59:29 INFO] rotating to position Y
[Status 20:59:29 INFO] .SET file for ACQ96 ready
[Ingest 20:59:29 INFO] Starting acquisition
[Status 20:59:30 INFO] reading housekeeping
[Status 20:59:48 INFO] acquire complete
[Status 20:59:49 INFO] writing housekeeping
[Sequencer 20:59:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 20:59:49 INFO] incremented Y scene to 371 completed views
[Sequencer 20:59:49 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 20:59:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 20:59:49 INFO] incremented to [AERI set: name Z371, 6 scans, 0 angle, D16300 command] set
[sigmove 20:59:49 INFO] Y371.SIG(18)
[sigmove 20:59:49 DEBUG] transformed Y371Ma.SPC -> Y371MA.SPC
[sigmove 20:59:49 DEBUG] transformed Y371Mb.SPC -> Y371MB.SPC
[sigmove 20:59:49 DEBUG] transformed Y371Mc.SPC -> Y371MC.SPC
[sigmove 20:59:49 DEBUG] transformed Y371Md.SPC -> Y371MD.SPC
[sigmove 20:59:49 DEBUG] transformed Y371Me.SPC -> Y371ME.SPC
[sigmove 20:59:49 DEBUG] transformed Y371Mf.SPC -> Y371MF.SPC
[Status 20:59:49 INFO] data for Y371 transferred to science data processing
[Tidy 20:59:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 20:59:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 20:59:49 INFO] resetting WatchDogTimer
[Status 20:59:49 INFO] Starting Set [AERI set: name Z371, 6 scans, 0 angle, D16300 command]
[Ingest 20:59:49 INFO] Sending XML status message
[Status 20:59:49 INFO] Mirror angle: 0
[Mirror 20:59:50 INFO] rotating to position Z
[Status 20:59:50 INFO] .SET file for ACQ96 ready
[Ingest 20:59:51 INFO] Starting acquisition
[Status 20:59:51 INFO] reading housekeeping
[Status 21:00:09 INFO] acquire complete
[Status 21:00:10 INFO] writing housekeeping
[Sequencer 21:00:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:00:10 INFO] incremented Z scene to 371 completed views
[Sequencer 21:00:10 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:00:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:00:10 INFO] incremented to [AERI set: name A372, 6 scans, 120 angle, D28300 command] set
[sigmove 21:00:10 INFO] Z371.SIG(18)
[sigmove 21:00:10 DEBUG] transformed Z371Ma.SPC -> Z371MA.SPC
[sigmove 21:00:10 DEBUG] transformed Z371Mb.SPC -> Z371MB.SPC
[sigmove 21:00:10 DEBUG] transformed Z371Mc.SPC -> Z371MC.SPC
[sigmove 21:00:10 DEBUG] transformed Z371Md.SPC -> Z371MD.SPC
[sigmove 21:00:10 DEBUG] transformed Z371Me.SPC -> Z371ME.SPC
[sigmove 21:00:10 DEBUG] transformed Z371Mf.SPC -> Z371MF.SPC
[Status 21:00:10 INFO] data for Z371 transferred to science data processing
[Tidy 21:00:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:00:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:00:10 INFO] resetting WatchDogTimer
[Status 21:00:11 INFO] Starting Set [AERI set: name A372, 6 scans, 120 angle, D28300 command]
[Ingest 21:00:11 INFO] Sending XML status message
[Status 21:00:11 INFO] Mirror angle: 120
[Mirror 21:00:11 INFO] rotating to position A
[Status 21:00:13 INFO] .SET file for ACQ96 ready
[Ingest 21:00:13 INFO] Starting acquisition
[Status 21:00:14 INFO] reading housekeeping
[Status 21:00:32 INFO] acquire complete
[Status 21:00:33 INFO] writing housekeeping
[Sequencer 21:00:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:00:33 INFO] incremented A scene to 372 completed views
[Sequencer 21:00:33 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:00:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:00:33 INFO] incremented to [AERI set: name H372, 6 scans, 60 angle, D22500 command] set
[sigmove 21:00:33 INFO] A372.SIG(18)
[sigmove 21:00:33 DEBUG] transformed A372Ma.SPC -> A372MA.SPC
[sigmove 21:00:33 DEBUG] transformed A372Mb.SPC -> A372MB.SPC
[sigmove 21:00:33 DEBUG] transformed A372Mc.SPC -> A372MC.SPC
[sigmove 21:00:33 DEBUG] transformed A372Md.SPC -> A372MD.SPC
[sigmove 21:00:33 DEBUG] transformed A372Me.SPC -> A372ME.SPC
[sigmove 21:00:33 DEBUG] transformed A372Mf.SPC -> A372MF.SPC
[Status 21:00:33 INFO] data for A372 transferred to science data processing
[Tidy 21:00:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:00:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:00:33 INFO] resetting WatchDogTimer
[Status 21:00:33 INFO] Starting Set [AERI set: name H372, 6 scans, 60 angle, D22500 command]
[Ingest 21:00:33 INFO] Sending XML status message
[Status 21:00:33 INFO] Mirror angle: 60
[Mirror 21:00:34 INFO] rotating to position H
[Status 21:00:35 INFO] .SET file for ACQ96 ready
[Ingest 21:00:35 INFO] Starting acquisition
[Status 21:00:36 INFO] reading housekeeping
[Status 21:00:53 INFO] acquire complete
[Status 21:00:54 INFO] writing housekeeping
[Sequencer 21:00:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:00:54 INFO] incremented H scene to 372 completed views
[Sequencer 21:00:54 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:00:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:00:54 INFO] incremented to [AERI set: name S372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:00:54 INFO] H372.SIG(18)
[sigmove 21:00:54 DEBUG] transformed H372Ma.SPC -> H372MA.SPC
[sigmove 21:00:54 DEBUG] transformed H372Mb.SPC -> H372MB.SPC
[sigmove 21:00:54 DEBUG] transformed H372Mc.SPC -> H372MC.SPC
[sigmove 21:00:54 DEBUG] transformed H372Md.SPC -> H372MD.SPC
[sigmove 21:00:54 DEBUG] transformed H372Me.SPC -> H372ME.SPC
[sigmove 21:00:54 DEBUG] transformed H372Mf.SPC -> H372MF.SPC
[Status 21:00:54 INFO] data for H372 transferred to science data processing
[Tidy 21:00:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:00:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:00:54 INFO] resetting WatchDogTimer
[Status 21:00:54 INFO] Starting Set [AERI set: name S372, 6 scans, 0 angle, D16300 command]
[Ingest 21:00:54 INFO] Sending XML status message
[Status 21:00:54 INFO] Mirror angle: 0
[Mirror 21:00:55 INFO] rotating to position S
[Status 21:00:56 INFO] .SET file for ACQ96 ready
[Ingest 21:00:56 INFO] Starting acquisition
[Status 21:00:57 INFO] reading housekeeping
[Status 21:01:14 INFO] acquire complete
[Status 21:01:15 INFO] writing housekeeping
[Sequencer 21:01:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:01:15 INFO] incremented S scene to 372 completed views
[Sequencer 21:01:15 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:01:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:01:15 INFO] incremented to [AERI set: name T372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:01:15 INFO] S372.SIG(18)
[sigmove 21:01:15 DEBUG] transformed S372Ma.SPC -> S372MA.SPC
[sigmove 21:01:15 DEBUG] transformed S372Mb.SPC -> S372MB.SPC
[sigmove 21:01:15 DEBUG] transformed S372Mc.SPC -> S372MC.SPC
[sigmove 21:01:15 DEBUG] transformed S372Md.SPC -> S372MD.SPC
[sigmove 21:01:15 DEBUG] transformed S372Me.SPC -> S372ME.SPC
[sigmove 21:01:15 DEBUG] transformed S372Mf.SPC -> S372MF.SPC
[Status 21:01:15 INFO] data for S372 transferred to science data processing
[Tidy 21:01:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:01:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:01:15 INFO] resetting WatchDogTimer
[Status 21:01:16 INFO] Starting Set [AERI set: name T372, 6 scans, 0 angle, D16300 command]
[Ingest 21:01:16 INFO] Sending XML status message
[Status 21:01:16 INFO] Mirror angle: 0
[Mirror 21:01:16 INFO] rotating to position T
[Status 21:01:17 INFO] .SET file for ACQ96 ready
[Ingest 21:01:17 INFO] Starting acquisition
[Status 21:01:18 INFO] reading housekeeping
[Status 21:01:40 INFO] acquire complete
[Status 21:01:41 INFO] writing housekeeping
[Sequencer 21:01:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:01:41 INFO] incremented T scene to 372 completed views
[Sequencer 21:01:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:01:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:01:41 INFO] incremented to [AERI set: name U372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:01:41 INFO] T372.SIG(18)
[sigmove 21:01:41 DEBUG] transformed T372Ma.SPC -> T372MA.SPC
[sigmove 21:01:41 DEBUG] transformed T372Mb.SPC -> T372MB.SPC
[sigmove 21:01:41 DEBUG] transformed T372Mc.SPC -> T372MC.SPC
[sigmove 21:01:41 DEBUG] transformed T372Md.SPC -> T372MD.SPC
[sigmove 21:01:41 DEBUG] transformed T372Me.SPC -> T372ME.SPC
[sigmove 21:01:41 DEBUG] transformed T372Mf.SPC -> T372MF.SPC
[Status 21:01:41 INFO] data for T372 transferred to science data processing
[Tidy 21:01:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:01:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:01:41 INFO] resetting WatchDogTimer
[Status 21:01:42 INFO] Starting Set [AERI set: name U372, 6 scans, 0 angle, D16300 command]
[Ingest 21:01:42 INFO] Sending XML status message
[Status 21:01:42 INFO] Mirror angle: 0
[Mirror 21:01:42 INFO] rotating to position U
[Status 21:01:43 INFO] .SET file for ACQ96 ready
[Ingest 21:01:43 INFO] Starting acquisition
[Status 21:01:44 INFO] reading housekeeping
[Status 21:02:01 INFO] acquire complete
[Status 21:02:02 INFO] writing housekeeping
[Sequencer 21:02:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:02:02 INFO] incremented U scene to 372 completed views
[Sequencer 21:02:02 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:02:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:02:02 INFO] incremented to [AERI set: name V372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:02:02 INFO] U372.SIG(18)
[sigmove 21:02:02 DEBUG] transformed U372Ma.SPC -> U372MA.SPC
[sigmove 21:02:02 DEBUG] transformed U372Mb.SPC -> U372MB.SPC
[sigmove 21:02:02 DEBUG] transformed U372Mc.SPC -> U372MC.SPC
[sigmove 21:02:02 DEBUG] transformed U372Md.SPC -> U372MD.SPC
[sigmove 21:02:02 DEBUG] transformed U372Me.SPC -> U372ME.SPC
[sigmove 21:02:02 DEBUG] transformed U372Mf.SPC -> U372MF.SPC
[Status 21:02:02 INFO] data for U372 transferred to science data processing
[Tidy 21:02:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:02:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:02:02 INFO] resetting WatchDogTimer
[Status 21:02:03 INFO] Starting Set [AERI set: name V372, 6 scans, 0 angle, D16300 command]
[Ingest 21:02:03 INFO] Sending XML status message
[Status 21:02:03 INFO] Mirror angle: 0
[Mirror 21:02:03 INFO] rotating to position V
[Status 21:02:04 INFO] .SET file for ACQ96 ready
[Ingest 21:02:04 INFO] Starting acquisition
[Status 21:02:05 INFO] reading housekeeping
[Status 21:02:23 INFO] acquire complete
[Status 21:02:24 INFO] writing housekeeping
[Sequencer 21:02:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:02:24 INFO] incremented V scene to 372 completed views
[Sequencer 21:02:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:02:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:02:24 INFO] incremented to [AERI set: name W372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:02:24 INFO] V372.SIG(18)
[sigmove 21:02:24 DEBUG] transformed V372Ma.SPC -> V372MA.SPC
[sigmove 21:02:24 DEBUG] transformed V372Mb.SPC -> V372MB.SPC
[sigmove 21:02:24 DEBUG] transformed V372Mc.SPC -> V372MC.SPC
[sigmove 21:02:24 DEBUG] transformed V372Md.SPC -> V372MD.SPC
[sigmove 21:02:24 DEBUG] transformed V372Me.SPC -> V372ME.SPC
[sigmove 21:02:24 DEBUG] transformed V372Mf.SPC -> V372MF.SPC
[Status 21:02:24 INFO] data for V372 transferred to science data processing
[Tidy 21:02:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:02:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:02:24 INFO] resetting WatchDogTimer
[Status 21:02:24 INFO] Starting Set [AERI set: name W372, 6 scans, 0 angle, D16300 command]
[Ingest 21:02:24 INFO] Sending XML status message
[Status 21:02:24 INFO] Mirror angle: 0
[Mirror 21:02:25 INFO] rotating to position W
[Status 21:02:25 INFO] .SET file for ACQ96 ready
[Ingest 21:02:26 INFO] Starting acquisition
[Status 21:02:26 INFO] reading housekeeping
[Status 21:02:44 INFO] acquire complete
[Status 21:02:45 INFO] writing housekeeping
[Sequencer 21:02:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:02:45 INFO] incremented W scene to 372 completed views
[Sequencer 21:02:45 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:02:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:02:45 INFO] incremented to [AERI set: name X372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:02:45 INFO] W372.SIG(18)
[sigmove 21:02:45 DEBUG] transformed W372Ma.SPC -> W372MA.SPC
[sigmove 21:02:45 DEBUG] transformed W372Mb.SPC -> W372MB.SPC
[sigmove 21:02:45 DEBUG] transformed W372Mc.SPC -> W372MC.SPC
[sigmove 21:02:45 DEBUG] transformed W372Md.SPC -> W372MD.SPC
[sigmove 21:02:45 DEBUG] transformed W372Me.SPC -> W372ME.SPC
[sigmove 21:02:45 DEBUG] transformed W372Mf.SPC -> W372MF.SPC
[Status 21:02:45 INFO] data for W372 transferred to science data processing
[Tidy 21:02:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:02:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:02:45 INFO] resetting WatchDogTimer
[Status 21:02:45 INFO] Starting Set [AERI set: name X372, 6 scans, 0 angle, D16300 command]
[Ingest 21:02:45 INFO] Sending XML status message
[Status 21:02:46 INFO] Mirror angle: 0
[Mirror 21:02:46 INFO] rotating to position X
[Status 21:02:47 INFO] .SET file for ACQ96 ready
[Ingest 21:02:47 INFO] Starting acquisition
[Status 21:02:47 INFO] reading housekeeping
[Status 21:03:05 INFO] acquire complete
[Status 21:03:06 INFO] writing housekeeping
[Sequencer 21:03:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:03:06 INFO] incremented X scene to 372 completed views
[Sequencer 21:03:06 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:03:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:03:06 INFO] incremented to [AERI set: name Y372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:03:06 INFO] X372.SIG(18)
[sigmove 21:03:06 DEBUG] transformed X372Ma.SPC -> X372MA.SPC
[sigmove 21:03:06 DEBUG] transformed X372Mb.SPC -> X372MB.SPC
[sigmove 21:03:06 DEBUG] transformed X372Mc.SPC -> X372MC.SPC
[sigmove 21:03:06 DEBUG] transformed X372Md.SPC -> X372MD.SPC
[sigmove 21:03:06 DEBUG] transformed X372Me.SPC -> X372ME.SPC
[sigmove 21:03:06 DEBUG] transformed X372Mf.SPC -> X372MF.SPC
[Status 21:03:06 INFO] data for X372 transferred to science data processing
[Tidy 21:03:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:03:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:03:06 INFO] resetting WatchDogTimer
[Status 21:03:07 INFO] Starting Set [AERI set: name Y372, 6 scans, 0 angle, D16300 command]
[Ingest 21:03:07 INFO] Sending XML status message
[Status 21:03:07 INFO] Mirror angle: 0
[Mirror 21:03:07 INFO] rotating to position Y
[Status 21:03:08 INFO] .SET file for ACQ96 ready
[Ingest 21:03:08 INFO] Starting acquisition
[Status 21:03:09 INFO] reading housekeeping
[Status 21:03:27 INFO] acquire complete
[Status 21:03:28 INFO] writing housekeeping
[Sequencer 21:03:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:03:28 INFO] incremented Y scene to 372 completed views
[Sequencer 21:03:28 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:03:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:03:28 INFO] incremented to [AERI set: name Z372, 6 scans, 0 angle, D16300 command] set
[sigmove 21:03:28 INFO] Y372.SIG(18)
[sigmove 21:03:28 DEBUG] transformed Y372Ma.SPC -> Y372MA.SPC
[sigmove 21:03:28 DEBUG] transformed Y372Mb.SPC -> Y372MB.SPC
[sigmove 21:03:28 DEBUG] transformed Y372Mc.SPC -> Y372MC.SPC
[sigmove 21:03:28 DEBUG] transformed Y372Md.SPC -> Y372MD.SPC
[sigmove 21:03:28 DEBUG] transformed Y372Me.SPC -> Y372ME.SPC
[sigmove 21:03:28 DEBUG] transformed Y372Mf.SPC -> Y372MF.SPC
[Status 21:03:28 INFO] data for Y372 transferred to science data processing
[Tidy 21:03:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:03:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:03:28 INFO] resetting WatchDogTimer
[Status 21:03:28 INFO] Starting Set [AERI set: name Z372, 6 scans, 0 angle, D16300 command]
[Ingest 21:03:28 INFO] Sending XML status message
[Status 21:03:28 INFO] Mirror angle: 0
[Mirror 21:03:29 INFO] rotating to position Z
[Status 21:03:29 INFO] .SET file for ACQ96 ready
[Ingest 21:03:30 INFO] Starting acquisition
[Status 21:03:30 INFO] reading housekeeping
[Status 21:03:48 INFO] acquire complete
[Status 21:03:49 INFO] writing housekeeping
[Sequencer 21:03:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:03:49 INFO] incremented Z scene to 372 completed views
[Sequencer 21:03:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:03:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:03:49 INFO] incremented to [AERI set: name H373, 6 scans, 60 angle, D22500 command] set
[sigmove 21:03:49 INFO] Z372.SIG(18)
[sigmove 21:03:49 DEBUG] transformed Z372Ma.SPC -> Z372MA.SPC
[sigmove 21:03:49 DEBUG] transformed Z372Mb.SPC -> Z372MB.SPC
[sigmove 21:03:49 DEBUG] transformed Z372Mc.SPC -> Z372MC.SPC
[sigmove 21:03:49 DEBUG] transformed Z372Md.SPC -> Z372MD.SPC
[sigmove 21:03:49 DEBUG] transformed Z372Me.SPC -> Z372ME.SPC
[sigmove 21:03:49 DEBUG] transformed Z372Mf.SPC -> Z372MF.SPC
[Status 21:03:49 INFO] data for Z372 transferred to science data processing
[Tidy 21:03:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:03:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:03:49 INFO] resetting WatchDogTimer
[Status 21:03:49 INFO] Starting Set [AERI set: name H373, 6 scans, 60 angle, D22500 command]
[Ingest 21:03:49 INFO] Sending XML status message
[Status 21:03:49 INFO] Mirror angle: 60
[Mirror 21:03:50 INFO] rotating to position H
[Status 21:03:51 INFO] .SET file for ACQ96 ready
[Ingest 21:03:51 INFO] Starting acquisition
[Status 21:03:52 INFO] reading housekeeping
[Status 21:04:09 INFO] acquire complete
[Status 21:04:10 INFO] writing housekeeping
[Sequencer 21:04:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:04:10 INFO] incremented H scene to 373 completed views
[Sequencer 21:04:10 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:04:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:04:10 INFO] incremented to [AERI set: name A373, 6 scans, 120 angle, D28300 command] set
[sigmove 21:04:10 INFO] H373.SIG(18)
[sigmove 21:04:10 DEBUG] transformed H373Ma.SPC -> H373MA.SPC
[sigmove 21:04:10 DEBUG] transformed H373Mb.SPC -> H373MB.SPC
[sigmove 21:04:10 DEBUG] transformed H373Mc.SPC -> H373MC.SPC
[sigmove 21:04:10 DEBUG] transformed H373Md.SPC -> H373MD.SPC
[sigmove 21:04:10 DEBUG] transformed H373Me.SPC -> H373ME.SPC
[sigmove 21:04:10 DEBUG] transformed H373Mf.SPC -> H373MF.SPC
[Status 21:04:10 INFO] data for H373 transferred to science data processing
[Tidy 21:04:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:04:10 INFO] A371.FIN(19),H371.FIN(19),S371.FIN(19),T371.FIN(19),U371.FIN(19),V371.FIN(19),W371.FIN(19),X371.FIN(19),Y371.FIN(19),Z371.FIN(19),A372.FIN(19),H372.FIN(19),S372.FIN(19),T372.FIN(19),U372.FIN(19),V372.FIN(19),W372.FIN(19),X372.FIN(19),Y372.FIN(19),Z372.FIN(19)
[sigmove 21:04:10 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:04:10 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:04:17 DEBUG] done zipping
[WatchDog 21:04:17 INFO] resetting WatchDogTimer
[Status 21:04:18 INFO] Starting Set [AERI set: name A373, 6 scans, 120 angle, D28300 command]
[Ingest 21:04:18 INFO] Sending XML status message
[Status 21:04:18 INFO] Mirror angle: 120
[Mirror 21:04:18 INFO] rotating to position A
[Status 21:04:19 INFO] .SET file for ACQ96 ready
[Ingest 21:04:20 INFO] Starting acquisition
[Status 21:04:20 INFO] reading housekeeping
[Status 21:04:38 INFO] acquire complete
[Status 21:04:39 INFO] writing housekeeping
[Sequencer 21:04:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:04:39 INFO] incremented A scene to 373 completed views
[Sequencer 21:04:39 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:04:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:04:39 INFO] incremented to [AERI set: name S373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:04:39 INFO] A373.SIG(18)
[sigmove 21:04:39 DEBUG] transformed A373Ma.SPC -> A373MA.SPC
[sigmove 21:04:39 DEBUG] transformed A373Mb.SPC -> A373MB.SPC
[sigmove 21:04:39 DEBUG] transformed A373Mc.SPC -> A373MC.SPC
[sigmove 21:04:39 DEBUG] transformed A373Md.SPC -> A373MD.SPC
[sigmove 21:04:39 DEBUG] transformed A373Me.SPC -> A373ME.SPC
[sigmove 21:04:39 DEBUG] transformed A373Mf.SPC -> A373MF.SPC
[Status 21:04:40 INFO] data for A373 transferred to science data processing
[Tidy 21:04:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:04:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:04:40 INFO] resetting WatchDogTimer
[Status 21:04:40 INFO] Starting Set [AERI set: name S373, 6 scans, 0 angle, D16300 command]
[Ingest 21:04:40 INFO] Sending XML status message
[Status 21:04:40 INFO] Mirror angle: 0
[Mirror 21:04:40 INFO] rotating to position S
[Status 21:04:42 INFO] .SET file for ACQ96 ready
[Ingest 21:04:42 INFO] Starting acquisition
[Status 21:04:43 INFO] reading housekeeping
[Status 21:05:01 INFO] acquire complete
[Status 21:05:02 INFO] writing housekeeping
[Sequencer 21:05:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:05:02 INFO] incremented S scene to 373 completed views
[Sequencer 21:05:02 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:05:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:05:02 INFO] incremented to [AERI set: name T373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:05:02 INFO] S373.SIG(18)
[sigmove 21:05:02 DEBUG] transformed S373Ma.SPC -> S373MA.SPC
[sigmove 21:05:02 DEBUG] transformed S373Mb.SPC -> S373MB.SPC
[sigmove 21:05:02 DEBUG] transformed S373Mc.SPC -> S373MC.SPC
[sigmove 21:05:02 DEBUG] transformed S373Md.SPC -> S373MD.SPC
[sigmove 21:05:02 DEBUG] transformed S373Me.SPC -> S373ME.SPC
[sigmove 21:05:02 DEBUG] transformed S373Mf.SPC -> S373MF.SPC
[Status 21:05:02 INFO] data for S373 transferred to science data processing
[Tidy 21:05:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:05:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:05:02 INFO] resetting WatchDogTimer
[Status 21:05:02 INFO] Starting Set [AERI set: name T373, 6 scans, 0 angle, D16300 command]
[Ingest 21:05:02 INFO] Sending XML status message
[Status 21:05:02 INFO] Mirror angle: 0
[Mirror 21:05:03 INFO] rotating to position T
[Status 21:05:03 INFO] .SET file for ACQ96 ready
[Ingest 21:05:04 INFO] Starting acquisition
[Status 21:05:04 INFO] reading housekeeping
[Status 21:05:22 INFO] acquire complete
[Status 21:05:23 INFO] writing housekeeping
[Sequencer 21:05:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:05:23 INFO] incremented T scene to 373 completed views
[Sequencer 21:05:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:05:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:05:23 INFO] incremented to [AERI set: name U373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:05:23 INFO] T373.SIG(18)
[sigmove 21:05:23 DEBUG] transformed T373Ma.SPC -> T373MA.SPC
[sigmove 21:05:23 DEBUG] transformed T373Mb.SPC -> T373MB.SPC
[sigmove 21:05:23 DEBUG] transformed T373Mc.SPC -> T373MC.SPC
[sigmove 21:05:23 DEBUG] transformed T373Md.SPC -> T373MD.SPC
[sigmove 21:05:23 DEBUG] transformed T373Me.SPC -> T373ME.SPC
[sigmove 21:05:23 DEBUG] transformed T373Mf.SPC -> T373MF.SPC
[Status 21:05:23 INFO] data for T373 transferred to science data processing
[Tidy 21:05:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:05:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:05:23 INFO] resetting WatchDogTimer
[Status 21:05:24 INFO] Starting Set [AERI set: name U373, 6 scans, 0 angle, D16300 command]
[Ingest 21:05:24 INFO] Sending XML status message
[Status 21:05:24 INFO] Mirror angle: 0
[Mirror 21:05:24 INFO] rotating to position U
[Status 21:05:25 INFO] .SET file for ACQ96 ready
[Ingest 21:05:25 INFO] Starting acquisition
[Status 21:05:26 INFO] reading housekeeping
[Status 21:05:43 INFO] acquire complete
[Status 21:05:45 INFO] writing housekeeping
[Sequencer 21:05:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:05:45 INFO] incremented U scene to 373 completed views
[Sequencer 21:05:45 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:05:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:05:45 INFO] incremented to [AERI set: name V373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:05:45 INFO] U373.SIG(18)
[sigmove 21:05:45 DEBUG] transformed U373Ma.SPC -> U373MA.SPC
[sigmove 21:05:45 DEBUG] transformed U373Mb.SPC -> U373MB.SPC
[sigmove 21:05:45 DEBUG] transformed U373Mc.SPC -> U373MC.SPC
[sigmove 21:05:45 DEBUG] transformed U373Md.SPC -> U373MD.SPC
[sigmove 21:05:45 DEBUG] transformed U373Me.SPC -> U373ME.SPC
[sigmove 21:05:45 DEBUG] transformed U373Mf.SPC -> U373MF.SPC
[Status 21:05:45 INFO] data for U373 transferred to science data processing
[Tidy 21:05:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:05:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:05:45 INFO] resetting WatchDogTimer
[Status 21:05:45 INFO] Starting Set [AERI set: name V373, 6 scans, 0 angle, D16300 command]
[Ingest 21:05:45 INFO] Sending XML status message
[Status 21:05:45 INFO] Mirror angle: 0
[Mirror 21:05:46 INFO] rotating to position V
[Status 21:05:46 INFO] .SET file for ACQ96 ready
[Ingest 21:05:46 INFO] Starting acquisition
[Status 21:05:47 INFO] reading housekeeping
[Status 21:06:05 INFO] acquire complete
[Status 21:06:06 INFO] writing housekeeping
[Sequencer 21:06:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:06:06 INFO] incremented V scene to 373 completed views
[Sequencer 21:06:06 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:06:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:06:06 INFO] incremented to [AERI set: name W373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:06:06 INFO] V373.SIG(18)
[sigmove 21:06:06 DEBUG] transformed V373Ma.SPC -> V373MA.SPC
[sigmove 21:06:06 DEBUG] transformed V373Mb.SPC -> V373MB.SPC
[sigmove 21:06:06 DEBUG] transformed V373Mc.SPC -> V373MC.SPC
[sigmove 21:06:06 DEBUG] transformed V373Md.SPC -> V373MD.SPC
[sigmove 21:06:06 DEBUG] transformed V373Me.SPC -> V373ME.SPC
[sigmove 21:06:06 DEBUG] transformed V373Mf.SPC -> V373MF.SPC
[Status 21:06:06 INFO] data for V373 transferred to science data processing
[Tidy 21:06:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:06:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:06:06 INFO] resetting WatchDogTimer
[Status 21:06:06 INFO] Starting Set [AERI set: name W373, 6 scans, 0 angle, D16300 command]
[Ingest 21:06:06 INFO] Sending XML status message
[Status 21:06:06 INFO] Mirror angle: 0
[Mirror 21:06:07 INFO] rotating to position W
[Status 21:06:07 INFO] .SET file for ACQ96 ready
[Ingest 21:06:08 INFO] Starting acquisition
[Status 21:06:08 INFO] reading housekeeping
[Status 21:06:26 INFO] acquire complete
[Status 21:06:27 INFO] writing housekeeping
[Sequencer 21:06:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:06:27 INFO] incremented W scene to 373 completed views
[Sequencer 21:06:27 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:06:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:06:27 INFO] incremented to [AERI set: name X373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:06:27 INFO] W373.SIG(18)
[sigmove 21:06:27 DEBUG] transformed W373Ma.SPC -> W373MA.SPC
[sigmove 21:06:27 DEBUG] transformed W373Mb.SPC -> W373MB.SPC
[sigmove 21:06:27 DEBUG] transformed W373Mc.SPC -> W373MC.SPC
[sigmove 21:06:27 DEBUG] transformed W373Md.SPC -> W373MD.SPC
[sigmove 21:06:27 DEBUG] transformed W373Me.SPC -> W373ME.SPC
[sigmove 21:06:27 DEBUG] transformed W373Mf.SPC -> W373MF.SPC
[Status 21:06:27 INFO] data for W373 transferred to science data processing
[Tidy 21:06:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:06:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:06:27 INFO] resetting WatchDogTimer
[Status 21:06:28 INFO] Starting Set [AERI set: name X373, 6 scans, 0 angle, D16300 command]
[Ingest 21:06:28 INFO] Sending XML status message
[Status 21:06:28 INFO] Mirror angle: 0
[Mirror 21:06:28 INFO] rotating to position X
[Status 21:06:29 INFO] .SET file for ACQ96 ready
[Ingest 21:06:29 INFO] Starting acquisition
[Status 21:06:30 INFO] reading housekeeping
[Status 21:06:47 INFO] acquire complete
[Status 21:06:48 INFO] writing housekeeping
[Sequencer 21:06:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:06:48 INFO] incremented X scene to 373 completed views
[Sequencer 21:06:48 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:06:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:06:48 INFO] incremented to [AERI set: name Y373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:06:48 INFO] X373.SIG(18)
[sigmove 21:06:48 DEBUG] transformed X373Ma.SPC -> X373MA.SPC
[sigmove 21:06:48 DEBUG] transformed X373Mb.SPC -> X373MB.SPC
[sigmove 21:06:48 DEBUG] transformed X373Mc.SPC -> X373MC.SPC
[sigmove 21:06:48 DEBUG] transformed X373Md.SPC -> X373MD.SPC
[sigmove 21:06:48 DEBUG] transformed X373Me.SPC -> X373ME.SPC
[sigmove 21:06:48 DEBUG] transformed X373Mf.SPC -> X373MF.SPC
[Status 21:06:48 INFO] data for X373 transferred to science data processing
[Tidy 21:06:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:06:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:06:48 INFO] resetting WatchDogTimer
[Status 21:06:49 INFO] Starting Set [AERI set: name Y373, 6 scans, 0 angle, D16300 command]
[Ingest 21:06:49 INFO] Sending XML status message
[Status 21:06:49 INFO] Mirror angle: 0
[Mirror 21:06:49 INFO] rotating to position Y
[Status 21:06:50 INFO] .SET file for ACQ96 ready
[Ingest 21:06:50 INFO] Starting acquisition
[Status 21:06:51 INFO] reading housekeeping
[Status 21:07:09 INFO] acquire complete
[Status 21:07:10 INFO] writing housekeeping
[Sequencer 21:07:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:07:10 INFO] incremented Y scene to 373 completed views
[Sequencer 21:07:10 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:07:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:07:10 INFO] incremented to [AERI set: name Z373, 6 scans, 0 angle, D16300 command] set
[sigmove 21:07:10 INFO] Y373.SIG(18)
[sigmove 21:07:10 DEBUG] transformed Y373Ma.SPC -> Y373MA.SPC
[sigmove 21:07:10 DEBUG] transformed Y373Mb.SPC -> Y373MB.SPC
[sigmove 21:07:10 DEBUG] transformed Y373Mc.SPC -> Y373MC.SPC
[sigmove 21:07:10 DEBUG] transformed Y373Md.SPC -> Y373MD.SPC
[sigmove 21:07:10 DEBUG] transformed Y373Me.SPC -> Y373ME.SPC
[sigmove 21:07:10 DEBUG] transformed Y373Mf.SPC -> Y373MF.SPC
[Status 21:07:10 INFO] data for Y373 transferred to science data processing
[Tidy 21:07:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:07:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:07:10 INFO] resetting WatchDogTimer
[Status 21:07:10 INFO] Starting Set [AERI set: name Z373, 6 scans, 0 angle, D16300 command]
[Ingest 21:07:10 INFO] Sending XML status message
[Status 21:07:10 INFO] Mirror angle: 0
[Mirror 21:07:11 INFO] rotating to position Z
[Status 21:07:11 INFO] .SET file for ACQ96 ready
[Ingest 21:07:12 INFO] Starting acquisition
[Status 21:07:12 INFO] reading housekeeping
[Status 21:07:30 INFO] acquire complete
[Status 21:07:31 INFO] writing housekeeping
[Sequencer 21:07:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:07:31 INFO] incremented Z scene to 373 completed views
[Sequencer 21:07:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:07:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:07:31 INFO] incremented to [AERI set: name A374, 6 scans, 120 angle, D28300 command] set
[sigmove 21:07:31 INFO] Z373.SIG(18)
[sigmove 21:07:31 DEBUG] transformed Z373Ma.SPC -> Z373MA.SPC
[sigmove 21:07:31 DEBUG] transformed Z373Mb.SPC -> Z373MB.SPC
[sigmove 21:07:31 DEBUG] transformed Z373Mc.SPC -> Z373MC.SPC
[sigmove 21:07:31 DEBUG] transformed Z373Md.SPC -> Z373MD.SPC
[sigmove 21:07:31 DEBUG] transformed Z373Me.SPC -> Z373ME.SPC
[sigmove 21:07:31 DEBUG] transformed Z373Mf.SPC -> Z373MF.SPC
[Status 21:07:31 INFO] data for Z373 transferred to science data processing
[Tidy 21:07:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:07:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:07:31 INFO] resetting WatchDogTimer
[Status 21:07:32 INFO] Starting Set [AERI set: name A374, 6 scans, 120 angle, D28300 command]
[Ingest 21:07:32 INFO] Sending XML status message
[Status 21:07:32 INFO] Mirror angle: 120
[Mirror 21:07:32 INFO] rotating to position A
[Status 21:07:34 INFO] .SET file for ACQ96 ready
[Ingest 21:07:34 INFO] Starting acquisition
[Status 21:07:34 INFO] reading housekeeping
[Status 21:07:52 INFO] acquire complete
[Status 21:07:54 INFO] writing housekeeping
[Sequencer 21:07:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:07:54 INFO] incremented A scene to 374 completed views
[Sequencer 21:07:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:07:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:07:54 INFO] incremented to [AERI set: name H374, 6 scans, 60 angle, D22500 command] set
[sigmove 21:07:54 INFO] A374.SIG(18)
[sigmove 21:07:54 DEBUG] transformed A374Ma.SPC -> A374MA.SPC
[sigmove 21:07:54 DEBUG] transformed A374Mb.SPC -> A374MB.SPC
[sigmove 21:07:54 DEBUG] transformed A374Mc.SPC -> A374MC.SPC
[sigmove 21:07:54 DEBUG] transformed A374Md.SPC -> A374MD.SPC
[sigmove 21:07:54 DEBUG] transformed A374Me.SPC -> A374ME.SPC
[sigmove 21:07:54 DEBUG] transformed A374Mf.SPC -> A374MF.SPC
[Status 21:07:54 INFO] data for A374 transferred to science data processing
[Tidy 21:07:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:07:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:07:54 INFO] resetting WatchDogTimer
[Status 21:07:54 INFO] Starting Set [AERI set: name H374, 6 scans, 60 angle, D22500 command]
[Ingest 21:07:54 INFO] Sending XML status message
[Status 21:07:54 INFO] Mirror angle: 60
[Mirror 21:07:54 INFO] rotating to position H
[Status 21:07:56 INFO] .SET file for ACQ96 ready
[Ingest 21:07:56 INFO] Starting acquisition
[Status 21:07:56 INFO] reading housekeeping
[Status 21:08:15 INFO] acquire complete
[Status 21:08:16 INFO] writing housekeeping
[Sequencer 21:08:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:08:16 INFO] incremented H scene to 374 completed views
[Sequencer 21:08:16 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:08:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:08:16 INFO] incremented to [AERI set: name S374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:08:16 INFO] H374.SIG(18)
[sigmove 21:08:16 DEBUG] transformed H374Ma.SPC -> H374MA.SPC
[sigmove 21:08:16 DEBUG] transformed H374Mb.SPC -> H374MB.SPC
[sigmove 21:08:16 DEBUG] transformed H374Mc.SPC -> H374MC.SPC
[sigmove 21:08:16 DEBUG] transformed H374Md.SPC -> H374MD.SPC
[sigmove 21:08:16 DEBUG] transformed H374Me.SPC -> H374ME.SPC
[sigmove 21:08:16 DEBUG] transformed H374Mf.SPC -> H374MF.SPC
[Status 21:08:16 INFO] data for H374 transferred to science data processing
[Tidy 21:08:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:08:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:08:16 INFO] resetting WatchDogTimer
[Status 21:08:16 INFO] Starting Set [AERI set: name S374, 6 scans, 0 angle, D16300 command]
[Ingest 21:08:16 INFO] Sending XML status message
[Status 21:08:16 INFO] Mirror angle: 0
[Mirror 21:08:17 INFO] rotating to position S
[Status 21:08:18 INFO] .SET file for ACQ96 ready
[Ingest 21:08:18 INFO] Starting acquisition
[Status 21:08:19 INFO] reading housekeeping
[Status 21:08:36 INFO] acquire complete
[Status 21:08:37 INFO] writing housekeeping
[Sequencer 21:08:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:08:37 INFO] incremented S scene to 374 completed views
[Sequencer 21:08:37 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:08:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:08:37 INFO] incremented to [AERI set: name T374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:08:37 INFO] S374.SIG(18)
[sigmove 21:08:37 DEBUG] transformed S374Ma.SPC -> S374MA.SPC
[sigmove 21:08:37 DEBUG] transformed S374Mb.SPC -> S374MB.SPC
[sigmove 21:08:37 DEBUG] transformed S374Mc.SPC -> S374MC.SPC
[sigmove 21:08:37 DEBUG] transformed S374Md.SPC -> S374MD.SPC
[sigmove 21:08:37 DEBUG] transformed S374Me.SPC -> S374ME.SPC
[sigmove 21:08:37 DEBUG] transformed S374Mf.SPC -> S374MF.SPC
[Status 21:08:37 INFO] data for S374 transferred to science data processing
[Tidy 21:08:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:08:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:08:37 INFO] resetting WatchDogTimer
[Status 21:08:38 INFO] Starting Set [AERI set: name T374, 6 scans, 0 angle, D16300 command]
[Ingest 21:08:38 INFO] Sending XML status message
[Status 21:08:38 INFO] Mirror angle: 0
[Mirror 21:08:38 INFO] rotating to position T
[Status 21:08:39 INFO] .SET file for ACQ96 ready
[Ingest 21:08:39 INFO] Starting acquisition
[Status 21:08:40 INFO] reading housekeeping
[Status 21:08:57 INFO] acquire complete
[Status 21:08:59 INFO] writing housekeeping
[Sequencer 21:08:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:08:59 INFO] incremented T scene to 374 completed views
[Sequencer 21:08:59 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:08:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:08:59 INFO] incremented to [AERI set: name U374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:08:59 INFO] T374.SIG(18)
[sigmove 21:08:59 DEBUG] transformed T374Ma.SPC -> T374MA.SPC
[sigmove 21:08:59 DEBUG] transformed T374Mb.SPC -> T374MB.SPC
[sigmove 21:08:59 DEBUG] transformed T374Mc.SPC -> T374MC.SPC
[sigmove 21:08:59 DEBUG] transformed T374Md.SPC -> T374MD.SPC
[sigmove 21:08:59 DEBUG] transformed T374Me.SPC -> T374ME.SPC
[sigmove 21:08:59 DEBUG] transformed T374Mf.SPC -> T374MF.SPC
[Status 21:08:59 INFO] data for T374 transferred to science data processing
[Tidy 21:08:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:08:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:08:59 INFO] resetting WatchDogTimer
[Status 21:08:59 INFO] Starting Set [AERI set: name U374, 6 scans, 0 angle, D16300 command]
[Ingest 21:08:59 INFO] Sending XML status message
[Status 21:08:59 INFO] Mirror angle: 0
[Mirror 21:09:00 INFO] rotating to position U
[Status 21:09:00 INFO] .SET file for ACQ96 ready
[Ingest 21:09:00 INFO] Starting acquisition
[Status 21:09:01 INFO] reading housekeeping
[Status 21:09:19 INFO] acquire complete
[Status 21:09:20 INFO] writing housekeeping
[Sequencer 21:09:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:09:20 INFO] incremented U scene to 374 completed views
[Sequencer 21:09:20 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:09:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:09:20 INFO] incremented to [AERI set: name V374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:09:20 INFO] U374.SIG(18)
[sigmove 21:09:20 DEBUG] transformed U374Ma.SPC -> U374MA.SPC
[sigmove 21:09:20 DEBUG] transformed U374Mb.SPC -> U374MB.SPC
[sigmove 21:09:20 DEBUG] transformed U374Mc.SPC -> U374MC.SPC
[sigmove 21:09:20 DEBUG] transformed U374Md.SPC -> U374MD.SPC
[sigmove 21:09:20 DEBUG] transformed U374Me.SPC -> U374ME.SPC
[sigmove 21:09:20 DEBUG] transformed U374Mf.SPC -> U374MF.SPC
[Status 21:09:20 INFO] data for U374 transferred to science data processing
[Tidy 21:09:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:09:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:09:20 INFO] resetting WatchDogTimer
[Status 21:09:20 INFO] Starting Set [AERI set: name V374, 6 scans, 0 angle, D16300 command]
[Ingest 21:09:20 INFO] Sending XML status message
[Status 21:09:20 INFO] Mirror angle: 0
[Mirror 21:09:21 INFO] rotating to position V
[Status 21:09:21 INFO] .SET file for ACQ96 ready
[Ingest 21:09:22 INFO] Starting acquisition
[Status 21:09:22 INFO] reading housekeeping
[Status 21:09:40 INFO] acquire complete
[Status 21:09:41 INFO] writing housekeeping
[Sequencer 21:09:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:09:41 INFO] incremented V scene to 374 completed views
[Sequencer 21:09:41 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:09:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:09:41 INFO] incremented to [AERI set: name W374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:09:41 INFO] V374.SIG(18)
[sigmove 21:09:41 DEBUG] transformed V374Ma.SPC -> V374MA.SPC
[sigmove 21:09:41 DEBUG] transformed V374Mb.SPC -> V374MB.SPC
[sigmove 21:09:41 DEBUG] transformed V374Mc.SPC -> V374MC.SPC
[sigmove 21:09:41 DEBUG] transformed V374Md.SPC -> V374MD.SPC
[sigmove 21:09:41 DEBUG] transformed V374Me.SPC -> V374ME.SPC
[sigmove 21:09:41 DEBUG] transformed V374Mf.SPC -> V374MF.SPC
[Status 21:09:41 INFO] data for V374 transferred to science data processing
[Tidy 21:09:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:09:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:09:41 INFO] resetting WatchDogTimer
[Status 21:09:42 INFO] Starting Set [AERI set: name W374, 6 scans, 0 angle, D16300 command]
[Ingest 21:09:42 INFO] Sending XML status message
[Status 21:09:42 INFO] Mirror angle: 0
[Mirror 21:09:42 INFO] rotating to position W
[Status 21:09:43 INFO] .SET file for ACQ96 ready
[Ingest 21:09:43 INFO] Starting acquisition
[Status 21:09:44 INFO] reading housekeeping
[Status 21:10:01 INFO] acquire complete
[Status 21:10:02 INFO] writing housekeeping
[Sequencer 21:10:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:10:02 INFO] incremented W scene to 374 completed views
[Sequencer 21:10:02 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:10:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:10:03 INFO] incremented to [AERI set: name X374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:10:03 INFO] W374.SIG(18)
[sigmove 21:10:03 DEBUG] transformed W374Ma.SPC -> W374MA.SPC
[sigmove 21:10:03 DEBUG] transformed W374Mb.SPC -> W374MB.SPC
[sigmove 21:10:03 DEBUG] transformed W374Mc.SPC -> W374MC.SPC
[sigmove 21:10:03 DEBUG] transformed W374Md.SPC -> W374MD.SPC
[sigmove 21:10:03 DEBUG] transformed W374Me.SPC -> W374ME.SPC
[sigmove 21:10:03 DEBUG] transformed W374Mf.SPC -> W374MF.SPC
[Status 21:10:03 INFO] data for W374 transferred to science data processing
[Tidy 21:10:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:10:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:10:03 INFO] resetting WatchDogTimer
[Status 21:10:03 INFO] Starting Set [AERI set: name X374, 6 scans, 0 angle, D16300 command]
[Ingest 21:10:03 INFO] Sending XML status message
[Status 21:10:03 INFO] Mirror angle: 0
[Mirror 21:10:04 INFO] rotating to position X
[Status 21:10:04 INFO] .SET file for ACQ96 ready
[Ingest 21:10:04 INFO] Starting acquisition
[Status 21:10:05 INFO] reading housekeeping
[Status 21:10:23 INFO] acquire complete
[Status 21:10:24 INFO] writing housekeeping
[Sequencer 21:10:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:10:24 INFO] incremented X scene to 374 completed views
[Sequencer 21:10:24 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:10:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:10:24 INFO] incremented to [AERI set: name Y374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:10:24 INFO] X374.SIG(18)
[sigmove 21:10:24 DEBUG] transformed X374Ma.SPC -> X374MA.SPC
[sigmove 21:10:24 DEBUG] transformed X374Mb.SPC -> X374MB.SPC
[sigmove 21:10:24 DEBUG] transformed X374Mc.SPC -> X374MC.SPC
[sigmove 21:10:24 DEBUG] transformed X374Md.SPC -> X374MD.SPC
[sigmove 21:10:24 DEBUG] transformed X374Me.SPC -> X374ME.SPC
[sigmove 21:10:24 DEBUG] transformed X374Mf.SPC -> X374MF.SPC
[Status 21:10:24 INFO] data for X374 transferred to science data processing
[Tidy 21:10:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:10:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:10:24 INFO] resetting WatchDogTimer
[Status 21:10:24 INFO] Starting Set [AERI set: name Y374, 6 scans, 0 angle, D16300 command]
[Ingest 21:10:24 INFO] Sending XML status message
[Status 21:10:24 INFO] Mirror angle: 0
[Mirror 21:10:25 INFO] rotating to position Y
[Status 21:10:25 INFO] .SET file for ACQ96 ready
[Ingest 21:10:26 INFO] Starting acquisition
[Status 21:10:26 INFO] reading housekeeping
[Status 21:10:44 INFO] acquire complete
[Status 21:10:45 INFO] writing housekeeping
[Sequencer 21:10:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:10:45 INFO] incremented Y scene to 374 completed views
[Sequencer 21:10:45 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:10:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:10:45 INFO] incremented to [AERI set: name Z374, 6 scans, 0 angle, D16300 command] set
[sigmove 21:10:45 INFO] Y374.SIG(18)
[sigmove 21:10:45 DEBUG] transformed Y374Ma.SPC -> Y374MA.SPC
[sigmove 21:10:45 DEBUG] transformed Y374Mb.SPC -> Y374MB.SPC
[sigmove 21:10:45 DEBUG] transformed Y374Mc.SPC -> Y374MC.SPC
[sigmove 21:10:45 DEBUG] transformed Y374Md.SPC -> Y374MD.SPC
[sigmove 21:10:45 DEBUG] transformed Y374Me.SPC -> Y374ME.SPC
[sigmove 21:10:45 DEBUG] transformed Y374Mf.SPC -> Y374MF.SPC
[Status 21:10:45 INFO] data for Y374 transferred to science data processing
[Tidy 21:10:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:10:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:10:45 INFO] resetting WatchDogTimer
[Status 21:10:46 INFO] Starting Set [AERI set: name Z374, 6 scans, 0 angle, D16300 command]
[Ingest 21:10:46 INFO] Sending XML status message
[Status 21:10:46 INFO] Mirror angle: 0
[Mirror 21:10:46 INFO] rotating to position Z
[Status 21:10:47 INFO] .SET file for ACQ96 ready
[Ingest 21:10:47 INFO] Starting acquisition
[Status 21:10:48 INFO] reading housekeeping
[Status 21:11:05 INFO] acquire complete
[Status 21:11:06 INFO] writing housekeeping
[Sequencer 21:11:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:11:06 INFO] incremented Z scene to 374 completed views
[Sequencer 21:11:06 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:11:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:11:06 INFO] incremented to [AERI set: name H375, 6 scans, 60 angle, D22500 command] set
[sigmove 21:11:06 INFO] Z374.SIG(18)
[sigmove 21:11:06 DEBUG] transformed Z374Ma.SPC -> Z374MA.SPC
[sigmove 21:11:06 DEBUG] transformed Z374Mb.SPC -> Z374MB.SPC
[sigmove 21:11:06 DEBUG] transformed Z374Mc.SPC -> Z374MC.SPC
[sigmove 21:11:06 DEBUG] transformed Z374Md.SPC -> Z374MD.SPC
[sigmove 21:11:06 DEBUG] transformed Z374Me.SPC -> Z374ME.SPC
[sigmove 21:11:06 DEBUG] transformed Z374Mf.SPC -> Z374MF.SPC
[Status 21:11:06 INFO] data for Z374 transferred to science data processing
[Tidy 21:11:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:11:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:11:06 INFO] resetting WatchDogTimer
[Status 21:11:07 INFO] Starting Set [AERI set: name H375, 6 scans, 60 angle, D22500 command]
[Ingest 21:11:07 INFO] Sending XML status message
[Status 21:11:07 INFO] Mirror angle: 60
[Mirror 21:11:07 INFO] rotating to position H
[Status 21:11:08 INFO] .SET file for ACQ96 ready
[Ingest 21:11:09 INFO] Starting acquisition
[Status 21:11:09 INFO] reading housekeeping
[Status 21:11:27 INFO] acquire complete
[Status 21:11:28 INFO] writing housekeeping
[Sequencer 21:11:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:11:28 INFO] incremented H scene to 375 completed views
[Sequencer 21:11:28 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:11:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:11:28 INFO] incremented to [AERI set: name A375, 6 scans, 120 angle, D28300 command] set
[sigmove 21:11:28 INFO] H375.SIG(18)
[sigmove 21:11:28 DEBUG] transformed H375Ma.SPC -> H375MA.SPC
[sigmove 21:11:28 DEBUG] transformed H375Mb.SPC -> H375MB.SPC
[sigmove 21:11:28 DEBUG] transformed H375Mc.SPC -> H375MC.SPC
[sigmove 21:11:28 DEBUG] transformed H375Md.SPC -> H375MD.SPC
[sigmove 21:11:28 DEBUG] transformed H375Me.SPC -> H375ME.SPC
[sigmove 21:11:28 DEBUG] transformed H375Mf.SPC -> H375MF.SPC
[Status 21:11:28 INFO] data for H375 transferred to science data processing
[Tidy 21:11:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:11:28 INFO] A373.FIN(19),H373.FIN(19),S373.FIN(19),T373.FIN(19),U373.FIN(19),V373.FIN(19),W373.FIN(19),X373.FIN(19),Y373.FIN(19),Z373.FIN(19),A374.FIN(19),H374.FIN(19),S374.FIN(19),T374.FIN(19),U374.FIN(19),V374.FIN(19),W374.FIN(19),X374.FIN(19),Y374.FIN(19),Z374.FIN(19)
[sigmove 21:11:28 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:11:28 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:11:34 DEBUG] done zipping
[WatchDog 21:11:35 INFO] resetting WatchDogTimer
[Status 21:11:35 INFO] Starting Set [AERI set: name A375, 6 scans, 120 angle, D28300 command]
[Ingest 21:11:35 INFO] Sending XML status message
[Status 21:11:35 INFO] Mirror angle: 120
[Mirror 21:11:36 INFO] rotating to position A
[Status 21:11:37 INFO] .SET file for ACQ96 ready
[Ingest 21:11:38 INFO] Starting acquisition
[Status 21:11:39 INFO] reading housekeeping
[Status 21:11:56 INFO] acquire complete
[Status 21:11:57 INFO] writing housekeeping
[Sequencer 21:11:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:11:57 INFO] incremented A scene to 375 completed views
[Sequencer 21:11:57 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:11:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:11:57 INFO] incremented to [AERI set: name S375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:11:57 INFO] A375.SIG(18)
[sigmove 21:11:57 DEBUG] transformed A375Ma.SPC -> A375MA.SPC
[sigmove 21:11:57 DEBUG] transformed A375Mb.SPC -> A375MB.SPC
[sigmove 21:11:57 DEBUG] transformed A375Mc.SPC -> A375MC.SPC
[sigmove 21:11:57 DEBUG] transformed A375Md.SPC -> A375MD.SPC
[sigmove 21:11:57 DEBUG] transformed A375Me.SPC -> A375ME.SPC
[sigmove 21:11:57 DEBUG] transformed A375Mf.SPC -> A375MF.SPC
[Status 21:11:57 INFO] data for A375 transferred to science data processing
[Tidy 21:11:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:11:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:11:57 INFO] resetting WatchDogTimer
[Status 21:11:57 INFO] Starting Set [AERI set: name S375, 6 scans, 0 angle, D16300 command]
[Ingest 21:11:57 INFO] Sending XML status message
[Status 21:11:57 INFO] Mirror angle: 0
[Mirror 21:11:58 INFO] rotating to position S
[Status 21:11:59 INFO] .SET file for ACQ96 ready
[Ingest 21:12:00 INFO] Starting acquisition
[Status 21:12:00 INFO] reading housekeeping
[Status 21:12:18 INFO] acquire complete
[Status 21:12:19 INFO] writing housekeeping
[Sequencer 21:12:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:12:19 INFO] incremented S scene to 375 completed views
[Sequencer 21:12:19 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:12:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:12:19 INFO] incremented to [AERI set: name T375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:12:19 INFO] S375.SIG(18)
[sigmove 21:12:19 DEBUG] transformed S375Ma.SPC -> S375MA.SPC
[sigmove 21:12:19 DEBUG] transformed S375Mb.SPC -> S375MB.SPC
[sigmove 21:12:19 DEBUG] transformed S375Mc.SPC -> S375MC.SPC
[sigmove 21:12:19 DEBUG] transformed S375Md.SPC -> S375MD.SPC
[sigmove 21:12:19 DEBUG] transformed S375Me.SPC -> S375ME.SPC
[sigmove 21:12:19 DEBUG] transformed S375Mf.SPC -> S375MF.SPC
[Status 21:12:19 INFO] data for S375 transferred to science data processing
[Tidy 21:12:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:12:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:12:19 INFO] resetting WatchDogTimer
[Status 21:12:20 INFO] Starting Set [AERI set: name T375, 6 scans, 0 angle, D16300 command]
[Ingest 21:12:20 INFO] Sending XML status message
[Status 21:12:20 INFO] Mirror angle: 0
[Mirror 21:12:20 INFO] rotating to position T
[Status 21:12:21 INFO] .SET file for ACQ96 ready
[Ingest 21:12:21 INFO] Starting acquisition
[Status 21:12:22 INFO] reading housekeeping
[Status 21:12:39 INFO] acquire complete
[Status 21:12:41 INFO] writing housekeeping
[Sequencer 21:12:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:12:41 INFO] incremented T scene to 375 completed views
[Sequencer 21:12:41 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:12:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:12:41 INFO] incremented to [AERI set: name U375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:12:41 INFO] T375.SIG(18)
[sigmove 21:12:41 DEBUG] transformed T375Ma.SPC -> T375MA.SPC
[sigmove 21:12:41 DEBUG] transformed T375Mb.SPC -> T375MB.SPC
[sigmove 21:12:41 DEBUG] transformed T375Mc.SPC -> T375MC.SPC
[sigmove 21:12:41 DEBUG] transformed T375Md.SPC -> T375MD.SPC
[sigmove 21:12:41 DEBUG] transformed T375Me.SPC -> T375ME.SPC
[sigmove 21:12:41 DEBUG] transformed T375Mf.SPC -> T375MF.SPC
[Status 21:12:41 INFO] data for T375 transferred to science data processing
[Tidy 21:12:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:12:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:12:41 INFO] resetting WatchDogTimer
[Status 21:12:41 INFO] Starting Set [AERI set: name U375, 6 scans, 0 angle, D16300 command]
[Ingest 21:12:41 INFO] Sending XML status message
[Status 21:12:41 INFO] Mirror angle: 0
[Mirror 21:12:42 INFO] rotating to position U
[Status 21:12:42 INFO] .SET file for ACQ96 ready
[Ingest 21:12:42 INFO] Starting acquisition
[Status 21:12:43 INFO] reading housekeeping
[Status 21:13:01 INFO] acquire complete
[Status 21:13:02 INFO] writing housekeeping
[Sequencer 21:13:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:13:02 INFO] incremented U scene to 375 completed views
[Sequencer 21:13:02 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:13:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:13:02 INFO] incremented to [AERI set: name V375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:13:02 INFO] U375.SIG(18)
[sigmove 21:13:02 DEBUG] transformed U375Ma.SPC -> U375MA.SPC
[sigmove 21:13:02 DEBUG] transformed U375Mb.SPC -> U375MB.SPC
[sigmove 21:13:02 DEBUG] transformed U375Mc.SPC -> U375MC.SPC
[sigmove 21:13:02 DEBUG] transformed U375Md.SPC -> U375MD.SPC
[sigmove 21:13:02 DEBUG] transformed U375Me.SPC -> U375ME.SPC
[sigmove 21:13:02 DEBUG] transformed U375Mf.SPC -> U375MF.SPC
[Status 21:13:02 INFO] data for U375 transferred to science data processing
[Tidy 21:13:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:13:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:13:02 INFO] resetting WatchDogTimer
[Status 21:13:02 INFO] Starting Set [AERI set: name V375, 6 scans, 0 angle, D16300 command]
[Ingest 21:13:02 INFO] Sending XML status message
[Status 21:13:02 INFO] Mirror angle: 0
[Mirror 21:13:03 INFO] rotating to position V
[Status 21:13:03 INFO] .SET file for ACQ96 ready
[Ingest 21:13:04 INFO] Starting acquisition
[Status 21:13:04 INFO] reading housekeeping
[Status 21:13:22 INFO] acquire complete
[Status 21:13:23 INFO] writing housekeeping
[Sequencer 21:13:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:13:23 INFO] incremented V scene to 375 completed views
[Sequencer 21:13:23 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:13:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:13:23 INFO] incremented to [AERI set: name W375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:13:23 INFO] V375.SIG(18)
[sigmove 21:13:23 DEBUG] transformed V375Ma.SPC -> V375MA.SPC
[sigmove 21:13:23 DEBUG] transformed V375Mb.SPC -> V375MB.SPC
[sigmove 21:13:23 DEBUG] transformed V375Mc.SPC -> V375MC.SPC
[sigmove 21:13:23 DEBUG] transformed V375Md.SPC -> V375MD.SPC
[sigmove 21:13:23 DEBUG] transformed V375Me.SPC -> V375ME.SPC
[sigmove 21:13:23 DEBUG] transformed V375Mf.SPC -> V375MF.SPC
[Status 21:13:23 INFO] data for V375 transferred to science data processing
[Tidy 21:13:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:13:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:13:23 INFO] resetting WatchDogTimer
[Status 21:13:24 INFO] Starting Set [AERI set: name W375, 6 scans, 0 angle, D16300 command]
[Ingest 21:13:24 INFO] Sending XML status message
[Status 21:13:24 INFO] Mirror angle: 0
[Mirror 21:13:24 INFO] rotating to position W
[Status 21:13:25 INFO] .SET file for ACQ96 ready
[Ingest 21:13:25 INFO] Starting acquisition
[Status 21:13:26 INFO] reading housekeeping
[Status 21:13:43 INFO] acquire complete
[Status 21:13:45 INFO] writing housekeeping
[Sequencer 21:13:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:13:45 INFO] incremented W scene to 375 completed views
[Sequencer 21:13:45 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:13:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:13:45 INFO] incremented to [AERI set: name X375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:13:45 INFO] W375.SIG(18)
[sigmove 21:13:45 DEBUG] transformed W375Ma.SPC -> W375MA.SPC
[sigmove 21:13:45 DEBUG] transformed W375Mb.SPC -> W375MB.SPC
[sigmove 21:13:45 DEBUG] transformed W375Mc.SPC -> W375MC.SPC
[sigmove 21:13:45 DEBUG] transformed W375Md.SPC -> W375MD.SPC
[sigmove 21:13:45 DEBUG] transformed W375Me.SPC -> W375ME.SPC
[sigmove 21:13:45 DEBUG] transformed W375Mf.SPC -> W375MF.SPC
[Status 21:13:45 INFO] data for W375 transferred to science data processing
[Tidy 21:13:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:13:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:13:45 INFO] resetting WatchDogTimer
[Status 21:13:45 INFO] Starting Set [AERI set: name X375, 6 scans, 0 angle, D16300 command]
[Ingest 21:13:45 INFO] Sending XML status message
[Status 21:13:45 INFO] Mirror angle: 0
[Mirror 21:13:46 INFO] rotating to position X
[Status 21:13:46 INFO] .SET file for ACQ96 ready
[Ingest 21:13:46 INFO] Starting acquisition
[Status 21:13:47 INFO] reading housekeeping
[Status 21:14:05 INFO] acquire complete
[Status 21:14:06 INFO] writing housekeeping
[Sequencer 21:14:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:14:06 INFO] incremented X scene to 375 completed views
[Sequencer 21:14:06 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:14:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:14:06 INFO] incremented to [AERI set: name Y375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:14:06 INFO] X375.SIG(18)
[sigmove 21:14:06 DEBUG] transformed X375Ma.SPC -> X375MA.SPC
[sigmove 21:14:06 DEBUG] transformed X375Mb.SPC -> X375MB.SPC
[sigmove 21:14:06 DEBUG] transformed X375Mc.SPC -> X375MC.SPC
[sigmove 21:14:06 DEBUG] transformed X375Md.SPC -> X375MD.SPC
[sigmove 21:14:06 DEBUG] transformed X375Me.SPC -> X375ME.SPC
[sigmove 21:14:06 DEBUG] transformed X375Mf.SPC -> X375MF.SPC
[Status 21:14:06 INFO] data for X375 transferred to science data processing
[Tidy 21:14:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:14:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:14:06 INFO] resetting WatchDogTimer
[Status 21:14:06 INFO] Starting Set [AERI set: name Y375, 6 scans, 0 angle, D16300 command]
[Ingest 21:14:06 INFO] Sending XML status message
[Status 21:14:06 INFO] Mirror angle: 0
[Mirror 21:14:07 INFO] rotating to position Y
[Status 21:14:07 INFO] .SET file for ACQ96 ready
[Ingest 21:14:08 INFO] Starting acquisition
[Status 21:14:08 INFO] reading housekeeping
[Status 21:14:26 INFO] acquire complete
[Status 21:14:27 INFO] writing housekeeping
[Sequencer 21:14:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:14:27 INFO] incremented Y scene to 375 completed views
[Sequencer 21:14:27 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:14:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:14:27 INFO] incremented to [AERI set: name Z375, 6 scans, 0 angle, D16300 command] set
[sigmove 21:14:27 INFO] Y375.SIG(18)
[sigmove 21:14:27 DEBUG] transformed Y375Ma.SPC -> Y375MA.SPC
[sigmove 21:14:27 DEBUG] transformed Y375Mb.SPC -> Y375MB.SPC
[sigmove 21:14:27 DEBUG] transformed Y375Mc.SPC -> Y375MC.SPC
[sigmove 21:14:27 DEBUG] transformed Y375Md.SPC -> Y375MD.SPC
[sigmove 21:14:27 DEBUG] transformed Y375Me.SPC -> Y375ME.SPC
[sigmove 21:14:27 DEBUG] transformed Y375Mf.SPC -> Y375MF.SPC
[Status 21:14:27 INFO] data for Y375 transferred to science data processing
[Tidy 21:14:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:14:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:14:27 INFO] resetting WatchDogTimer
[Status 21:14:28 INFO] Starting Set [AERI set: name Z375, 6 scans, 0 angle, D16300 command]
[Ingest 21:14:28 INFO] Sending XML status message
[Status 21:14:28 INFO] Mirror angle: 0
[Mirror 21:14:28 INFO] rotating to position Z
[Status 21:14:29 INFO] .SET file for ACQ96 ready
[Ingest 21:14:29 INFO] Starting acquisition
[Status 21:14:30 INFO] reading housekeeping
[Status 21:14:47 INFO] acquire complete
[Status 21:14:48 INFO] writing housekeeping
[Sequencer 21:14:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:14:49 INFO] incremented Z scene to 375 completed views
[Sequencer 21:14:49 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:14:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:14:49 INFO] incremented to [AERI set: name A376, 6 scans, 120 angle, D28300 command] set
[sigmove 21:14:49 INFO] Z375.SIG(18)
[sigmove 21:14:49 DEBUG] transformed Z375Ma.SPC -> Z375MA.SPC
[sigmove 21:14:49 DEBUG] transformed Z375Mb.SPC -> Z375MB.SPC
[sigmove 21:14:49 DEBUG] transformed Z375Mc.SPC -> Z375MC.SPC
[sigmove 21:14:49 DEBUG] transformed Z375Md.SPC -> Z375MD.SPC
[sigmove 21:14:49 DEBUG] transformed Z375Me.SPC -> Z375ME.SPC
[sigmove 21:14:49 DEBUG] transformed Z375Mf.SPC -> Z375MF.SPC
[Status 21:14:49 INFO] data for Z375 transferred to science data processing
[Tidy 21:14:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:14:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:14:49 INFO] resetting WatchDogTimer
[Status 21:14:49 INFO] Starting Set [AERI set: name A376, 6 scans, 120 angle, D28300 command]
[Ingest 21:14:49 INFO] Sending XML status message
[Status 21:14:49 INFO] Mirror angle: 120
[Mirror 21:14:49 INFO] rotating to position A
[Status 21:14:51 INFO] .SET file for ACQ96 ready
[Ingest 21:14:51 INFO] Starting acquisition
[Status 21:14:52 INFO] reading housekeeping
[Status 21:15:10 INFO] acquire complete
[Status 21:15:11 INFO] writing housekeeping
[Sequencer 21:15:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:15:11 INFO] incremented A scene to 376 completed views
[Sequencer 21:15:11 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:15:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:15:11 INFO] incremented to [AERI set: name H376, 6 scans, 60 angle, D22500 command] set
[sigmove 21:15:11 INFO] A376.SIG(18)
[sigmove 21:15:11 DEBUG] transformed A376Ma.SPC -> A376MA.SPC
[sigmove 21:15:11 DEBUG] transformed A376Mb.SPC -> A376MB.SPC
[sigmove 21:15:11 DEBUG] transformed A376Mc.SPC -> A376MC.SPC
[sigmove 21:15:11 DEBUG] transformed A376Md.SPC -> A376MD.SPC
[sigmove 21:15:11 DEBUG] transformed A376Me.SPC -> A376ME.SPC
[sigmove 21:15:11 DEBUG] transformed A376Mf.SPC -> A376MF.SPC
[Status 21:15:11 INFO] data for A376 transferred to science data processing
[Tidy 21:15:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:15:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:15:11 INFO] resetting WatchDogTimer
[Status 21:15:11 INFO] Starting Set [AERI set: name H376, 6 scans, 60 angle, D22500 command]
[Ingest 21:15:11 INFO] Sending XML status message
[Status 21:15:11 INFO] Mirror angle: 60
[Mirror 21:15:12 INFO] rotating to position H
[Status 21:15:13 INFO] .SET file for ACQ96 ready
[Ingest 21:15:13 INFO] Starting acquisition
[Status 21:15:14 INFO] reading housekeeping
[Status 21:15:31 INFO] acquire complete
[Status 21:15:32 INFO] writing housekeeping
[Sequencer 21:15:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:15:32 INFO] incremented H scene to 376 completed views
[Sequencer 21:15:32 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:15:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:15:32 INFO] incremented to [AERI set: name S376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:15:32 INFO] H376.SIG(18)
[sigmove 21:15:32 DEBUG] transformed H376Ma.SPC -> H376MA.SPC
[sigmove 21:15:32 DEBUG] transformed H376Mb.SPC -> H376MB.SPC
[sigmove 21:15:32 DEBUG] transformed H376Mc.SPC -> H376MC.SPC
[sigmove 21:15:32 DEBUG] transformed H376Md.SPC -> H376MD.SPC
[sigmove 21:15:32 DEBUG] transformed H376Me.SPC -> H376ME.SPC
[sigmove 21:15:32 DEBUG] transformed H376Mf.SPC -> H376MF.SPC
[Status 21:15:32 INFO] data for H376 transferred to science data processing
[Tidy 21:15:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:15:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:15:32 INFO] resetting WatchDogTimer
[Status 21:15:33 INFO] Starting Set [AERI set: name S376, 6 scans, 0 angle, D16300 command]
[Ingest 21:15:33 INFO] Sending XML status message
[Status 21:15:33 INFO] Mirror angle: 0
[Mirror 21:15:33 INFO] rotating to position S
[Status 21:15:35 INFO] .SET file for ACQ96 ready
[Ingest 21:15:35 INFO] Starting acquisition
[Status 21:15:36 INFO] reading housekeeping
[Status 21:15:53 INFO] acquire complete
[Status 21:15:55 INFO] writing housekeeping
[Sequencer 21:15:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:15:55 INFO] incremented S scene to 376 completed views
[Sequencer 21:15:55 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:15:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:15:55 INFO] incremented to [AERI set: name T376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:15:55 INFO] S376.SIG(18)
[sigmove 21:15:55 DEBUG] transformed S376Ma.SPC -> S376MA.SPC
[sigmove 21:15:55 DEBUG] transformed S376Mb.SPC -> S376MB.SPC
[sigmove 21:15:55 DEBUG] transformed S376Mc.SPC -> S376MC.SPC
[sigmove 21:15:55 DEBUG] transformed S376Md.SPC -> S376MD.SPC
[sigmove 21:15:55 DEBUG] transformed S376Me.SPC -> S376ME.SPC
[sigmove 21:15:55 DEBUG] transformed S376Mf.SPC -> S376MF.SPC
[Status 21:15:55 INFO] data for S376 transferred to science data processing
[Tidy 21:15:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:15:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:15:55 INFO] resetting WatchDogTimer
[Status 21:15:55 INFO] Starting Set [AERI set: name T376, 6 scans, 0 angle, D16300 command]
[Ingest 21:15:55 INFO] Sending XML status message
[Status 21:15:55 INFO] Mirror angle: 0
[Mirror 21:15:56 INFO] rotating to position T
[Status 21:15:56 INFO] .SET file for ACQ96 ready
[Ingest 21:15:57 INFO] Starting acquisition
[Status 21:15:57 INFO] reading housekeeping
[Status 21:16:15 INFO] acquire complete
[Status 21:16:16 INFO] writing housekeeping
[Sequencer 21:16:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:16:16 INFO] incremented T scene to 376 completed views
[Sequencer 21:16:16 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:16:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:16:16 INFO] incremented to [AERI set: name U376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:16:16 INFO] T376.SIG(18)
[sigmove 21:16:16 DEBUG] transformed T376Ma.SPC -> T376MA.SPC
[sigmove 21:16:16 DEBUG] transformed T376Mb.SPC -> T376MB.SPC
[sigmove 21:16:16 DEBUG] transformed T376Mc.SPC -> T376MC.SPC
[sigmove 21:16:16 DEBUG] transformed T376Md.SPC -> T376MD.SPC
[sigmove 21:16:16 DEBUG] transformed T376Me.SPC -> T376ME.SPC
[sigmove 21:16:16 DEBUG] transformed T376Mf.SPC -> T376MF.SPC
[Status 21:16:16 INFO] data for T376 transferred to science data processing
[Tidy 21:16:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:16:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:16:16 INFO] resetting WatchDogTimer
[Status 21:16:17 INFO] Starting Set [AERI set: name U376, 6 scans, 0 angle, D16300 command]
[Ingest 21:16:17 INFO] Sending XML status message
[Status 21:16:17 INFO] Mirror angle: 0
[Mirror 21:16:17 INFO] rotating to position U
[Status 21:16:18 INFO] .SET file for ACQ96 ready
[Ingest 21:16:18 INFO] Starting acquisition
[Status 21:16:19 INFO] reading housekeeping
[Status 21:16:36 INFO] acquire complete
[Status 21:16:37 INFO] writing housekeeping
[Sequencer 21:16:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:16:37 INFO] incremented U scene to 376 completed views
[Sequencer 21:16:37 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:16:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:16:37 INFO] incremented to [AERI set: name V376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:16:37 INFO] U376.SIG(18)
[sigmove 21:16:37 DEBUG] transformed U376Ma.SPC -> U376MA.SPC
[sigmove 21:16:37 DEBUG] transformed U376Mb.SPC -> U376MB.SPC
[sigmove 21:16:37 DEBUG] transformed U376Mc.SPC -> U376MC.SPC
[sigmove 21:16:37 DEBUG] transformed U376Md.SPC -> U376MD.SPC
[sigmove 21:16:37 DEBUG] transformed U376Me.SPC -> U376ME.SPC
[sigmove 21:16:37 DEBUG] transformed U376Mf.SPC -> U376MF.SPC
[Status 21:16:37 INFO] data for U376 transferred to science data processing
[Tidy 21:16:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:16:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:16:37 INFO] resetting WatchDogTimer
[Status 21:16:38 INFO] Starting Set [AERI set: name V376, 6 scans, 0 angle, D16300 command]
[Ingest 21:16:38 INFO] Sending XML status message
[Status 21:16:38 INFO] Mirror angle: 0
[Mirror 21:16:38 INFO] rotating to position V
[Status 21:16:39 INFO] .SET file for ACQ96 ready
[Ingest 21:16:39 INFO] Starting acquisition
[Status 21:16:40 INFO] reading housekeeping
[Status 21:16:57 INFO] acquire complete
[Status 21:16:59 INFO] writing housekeeping
[Sequencer 21:16:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:16:59 INFO] incremented V scene to 376 completed views
[Sequencer 21:16:59 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:16:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:16:59 INFO] incremented to [AERI set: name W376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:16:59 INFO] V376.SIG(18)
[sigmove 21:16:59 DEBUG] transformed V376Ma.SPC -> V376MA.SPC
[sigmove 21:16:59 DEBUG] transformed V376Mb.SPC -> V376MB.SPC
[sigmove 21:16:59 DEBUG] transformed V376Mc.SPC -> V376MC.SPC
[sigmove 21:16:59 DEBUG] transformed V376Md.SPC -> V376MD.SPC
[sigmove 21:16:59 DEBUG] transformed V376Me.SPC -> V376ME.SPC
[sigmove 21:16:59 DEBUG] transformed V376Mf.SPC -> V376MF.SPC
[Status 21:16:59 INFO] data for V376 transferred to science data processing
[Tidy 21:16:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:16:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:16:59 INFO] resetting WatchDogTimer
[Status 21:16:59 INFO] Starting Set [AERI set: name W376, 6 scans, 0 angle, D16300 command]
[Ingest 21:16:59 INFO] Sending XML status message
[Status 21:16:59 INFO] Mirror angle: 0
[Mirror 21:17:00 INFO] rotating to position W
[Status 21:17:00 INFO] .SET file for ACQ96 ready
[Ingest 21:17:01 INFO] Starting acquisition
[Status 21:17:01 INFO] reading housekeeping
[Status 21:17:19 INFO] acquire complete
[Status 21:17:20 INFO] writing housekeeping
[Sequencer 21:17:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:17:20 INFO] incremented W scene to 376 completed views
[Sequencer 21:17:20 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:17:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:17:20 INFO] incremented to [AERI set: name X376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:17:20 INFO] W376.SIG(18)
[sigmove 21:17:20 DEBUG] transformed W376Ma.SPC -> W376MA.SPC
[sigmove 21:17:20 DEBUG] transformed W376Mb.SPC -> W376MB.SPC
[sigmove 21:17:20 DEBUG] transformed W376Mc.SPC -> W376MC.SPC
[sigmove 21:17:20 DEBUG] transformed W376Md.SPC -> W376MD.SPC
[sigmove 21:17:20 DEBUG] transformed W376Me.SPC -> W376ME.SPC
[sigmove 21:17:20 DEBUG] transformed W376Mf.SPC -> W376MF.SPC
[Status 21:17:20 INFO] data for W376 transferred to science data processing
[Tidy 21:17:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:17:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:17:20 INFO] resetting WatchDogTimer
[Status 21:17:20 INFO] Starting Set [AERI set: name X376, 6 scans, 0 angle, D16300 command]
[Ingest 21:17:20 INFO] Sending XML status message
[Status 21:17:20 INFO] Mirror angle: 0
[Mirror 21:17:21 INFO] rotating to position X
[Status 21:17:21 INFO] .SET file for ACQ96 ready
[Ingest 21:17:22 INFO] Starting acquisition
[Status 21:17:22 INFO] reading housekeeping
[Status 21:17:40 INFO] acquire complete
[Status 21:17:41 INFO] writing housekeeping
[Sequencer 21:17:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:17:41 INFO] incremented X scene to 376 completed views
[Sequencer 21:17:41 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:17:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:17:41 INFO] incremented to [AERI set: name Y376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:17:41 INFO] X376.SIG(18)
[sigmove 21:17:41 DEBUG] transformed X376Ma.SPC -> X376MA.SPC
[sigmove 21:17:41 DEBUG] transformed X376Mb.SPC -> X376MB.SPC
[sigmove 21:17:41 DEBUG] transformed X376Mc.SPC -> X376MC.SPC
[sigmove 21:17:41 DEBUG] transformed X376Md.SPC -> X376MD.SPC
[sigmove 21:17:41 DEBUG] transformed X376Me.SPC -> X376ME.SPC
[sigmove 21:17:41 DEBUG] transformed X376Mf.SPC -> X376MF.SPC
[Status 21:17:41 INFO] data for X376 transferred to science data processing
[Tidy 21:17:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:17:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:17:41 INFO] resetting WatchDogTimer
[Status 21:17:42 INFO] Starting Set [AERI set: name Y376, 6 scans, 0 angle, D16300 command]
[Ingest 21:17:42 INFO] Sending XML status message
[Status 21:17:42 INFO] Mirror angle: 0
[Mirror 21:17:42 INFO] rotating to position Y
[Status 21:17:43 INFO] .SET file for ACQ96 ready
[Ingest 21:17:43 INFO] Starting acquisition
[Status 21:17:44 INFO] reading housekeeping
[Status 21:18:01 INFO] acquire complete
[Status 21:18:03 INFO] writing housekeeping
[Sequencer 21:18:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:18:03 INFO] incremented Y scene to 376 completed views
[Sequencer 21:18:03 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:18:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:18:03 INFO] incremented to [AERI set: name Z376, 6 scans, 0 angle, D16300 command] set
[sigmove 21:18:03 INFO] Y376.SIG(18)
[sigmove 21:18:03 DEBUG] transformed Y376Ma.SPC -> Y376MA.SPC
[sigmove 21:18:03 DEBUG] transformed Y376Mb.SPC -> Y376MB.SPC
[sigmove 21:18:03 DEBUG] transformed Y376Mc.SPC -> Y376MC.SPC
[sigmove 21:18:03 DEBUG] transformed Y376Md.SPC -> Y376MD.SPC
[sigmove 21:18:03 DEBUG] transformed Y376Me.SPC -> Y376ME.SPC
[sigmove 21:18:03 DEBUG] transformed Y376Mf.SPC -> Y376MF.SPC
[Status 21:18:03 INFO] data for Y376 transferred to science data processing
[Tidy 21:18:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:18:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:18:03 INFO] resetting WatchDogTimer
[Status 21:18:03 INFO] Starting Set [AERI set: name Z376, 6 scans, 0 angle, D16300 command]
[Ingest 21:18:03 INFO] Sending XML status message
[Status 21:18:03 INFO] Mirror angle: 0
[Mirror 21:18:03 INFO] rotating to position Z
[Status 21:18:04 INFO] .SET file for ACQ96 ready
[Ingest 21:18:04 INFO] Starting acquisition
[Status 21:18:05 INFO] reading housekeeping
[Status 21:18:23 INFO] acquire complete
[Status 21:18:24 INFO] writing housekeeping
[Sequencer 21:18:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:18:24 INFO] incremented Z scene to 376 completed views
[Sequencer 21:18:24 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:18:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:18:24 INFO] incremented to [AERI set: name H377, 6 scans, 60 angle, D22500 command] set
[sigmove 21:18:24 INFO] Z376.SIG(18)
[sigmove 21:18:24 DEBUG] transformed Z376Ma.SPC -> Z376MA.SPC
[sigmove 21:18:24 DEBUG] transformed Z376Mb.SPC -> Z376MB.SPC
[sigmove 21:18:24 DEBUG] transformed Z376Mc.SPC -> Z376MC.SPC
[sigmove 21:18:24 DEBUG] transformed Z376Md.SPC -> Z376MD.SPC
[sigmove 21:18:24 DEBUG] transformed Z376Me.SPC -> Z376ME.SPC
[sigmove 21:18:24 DEBUG] transformed Z376Mf.SPC -> Z376MF.SPC
[Status 21:18:24 INFO] data for Z376 transferred to science data processing
[Tidy 21:18:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:18:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:18:24 INFO] resetting WatchDogTimer
[Status 21:18:24 INFO] Starting Set [AERI set: name H377, 6 scans, 60 angle, D22500 command]
[Ingest 21:18:24 INFO] Sending XML status message
[Status 21:18:24 INFO] Mirror angle: 60
[Mirror 21:18:25 INFO] rotating to position H
[Status 21:18:26 INFO] .SET file for ACQ96 ready
[Ingest 21:18:26 INFO] Starting acquisition
[Status 21:18:27 INFO] reading housekeeping
[Status 21:18:44 INFO] acquire complete
[Status 21:18:45 INFO] writing housekeeping
[Sequencer 21:18:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:18:45 INFO] incremented H scene to 377 completed views
[Sequencer 21:18:45 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:18:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:18:45 INFO] incremented to [AERI set: name A377, 6 scans, 120 angle, D28300 command] set
[sigmove 21:18:45 INFO] H377.SIG(18)
[sigmove 21:18:45 DEBUG] transformed H377Ma.SPC -> H377MA.SPC
[sigmove 21:18:45 DEBUG] transformed H377Mb.SPC -> H377MB.SPC
[sigmove 21:18:45 DEBUG] transformed H377Mc.SPC -> H377MC.SPC
[sigmove 21:18:45 DEBUG] transformed H377Md.SPC -> H377MD.SPC
[sigmove 21:18:45 DEBUG] transformed H377Me.SPC -> H377ME.SPC
[sigmove 21:18:45 DEBUG] transformed H377Mf.SPC -> H377MF.SPC
[Status 21:18:45 INFO] data for H377 transferred to science data processing
[Tidy 21:18:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:18:45 INFO] A375.FIN(19),H375.FIN(19),S375.FIN(19),T375.FIN(19),U375.FIN(19),V375.FIN(19),W375.FIN(19),X375.FIN(19),Y375.FIN(19),Z375.FIN(19),A376.FIN(19),H376.FIN(19),S376.FIN(19),T376.FIN(19),U376.FIN(19),V376.FIN(19),W376.FIN(19),X376.FIN(19),Y376.FIN(19),Z376.FIN(19)
[sigmove 21:18:45 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:18:45 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:18:52 DEBUG] done zipping
[WatchDog 21:18:52 INFO] resetting WatchDogTimer
[Status 21:18:53 INFO] Starting Set [AERI set: name A377, 6 scans, 120 angle, D28300 command]
[Ingest 21:18:53 INFO] Sending XML status message
[Status 21:18:53 INFO] Mirror angle: 120
[Mirror 21:18:53 INFO] rotating to position A
[Status 21:18:54 INFO] .SET file for ACQ96 ready
[Ingest 21:18:55 INFO] Starting acquisition
[Status 21:18:55 INFO] reading housekeeping
[Status 21:19:13 INFO] acquire complete
[Status 21:19:14 INFO] writing housekeeping
[Sequencer 21:19:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:19:14 INFO] incremented A scene to 377 completed views
[Sequencer 21:19:14 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:19:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:19:14 INFO] incremented to [AERI set: name S377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:19:14 INFO] A377.SIG(18)
[sigmove 21:19:14 DEBUG] transformed A377Ma.SPC -> A377MA.SPC
[sigmove 21:19:14 DEBUG] transformed A377Mb.SPC -> A377MB.SPC
[sigmove 21:19:14 DEBUG] transformed A377Mc.SPC -> A377MC.SPC
[sigmove 21:19:14 DEBUG] transformed A377Md.SPC -> A377MD.SPC
[sigmove 21:19:14 DEBUG] transformed A377Me.SPC -> A377ME.SPC
[sigmove 21:19:14 DEBUG] transformed A377Mf.SPC -> A377MF.SPC
[Status 21:19:14 INFO] data for A377 transferred to science data processing
[Tidy 21:19:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:19:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:19:14 INFO] resetting WatchDogTimer
[Status 21:19:15 INFO] Starting Set [AERI set: name S377, 6 scans, 0 angle, D16300 command]
[Ingest 21:19:15 INFO] Sending XML status message
[Status 21:19:15 INFO] Mirror angle: 0
[Mirror 21:19:15 INFO] rotating to position S
[Status 21:19:17 INFO] .SET file for ACQ96 ready
[Ingest 21:19:17 INFO] Starting acquisition
[Status 21:19:18 INFO] reading housekeeping
[Status 21:19:36 INFO] acquire complete
[Status 21:19:37 INFO] writing housekeeping
[Sequencer 21:19:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:19:37 INFO] incremented S scene to 377 completed views
[Sequencer 21:19:37 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:19:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:19:37 INFO] incremented to [AERI set: name T377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:19:37 INFO] S377.SIG(18)
[sigmove 21:19:37 DEBUG] transformed S377Ma.SPC -> S377MA.SPC
[sigmove 21:19:37 DEBUG] transformed S377Mb.SPC -> S377MB.SPC
[sigmove 21:19:37 DEBUG] transformed S377Mc.SPC -> S377MC.SPC
[sigmove 21:19:37 DEBUG] transformed S377Md.SPC -> S377MD.SPC
[sigmove 21:19:37 DEBUG] transformed S377Me.SPC -> S377ME.SPC
[sigmove 21:19:37 DEBUG] transformed S377Mf.SPC -> S377MF.SPC
[Status 21:19:37 INFO] data for S377 transferred to science data processing
[Tidy 21:19:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:19:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:19:37 INFO] resetting WatchDogTimer
[Status 21:19:37 INFO] Starting Set [AERI set: name T377, 6 scans, 0 angle, D16300 command]
[Ingest 21:19:37 INFO] Sending XML status message
[Status 21:19:37 INFO] Mirror angle: 0
[Mirror 21:19:38 INFO] rotating to position T
[Status 21:19:38 INFO] .SET file for ACQ96 ready
[Ingest 21:19:39 INFO] Starting acquisition
[Status 21:19:39 INFO] reading housekeeping
[Status 21:19:57 INFO] acquire complete
[Status 21:19:58 INFO] writing housekeeping
[Sequencer 21:19:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:19:58 INFO] incremented T scene to 377 completed views
[Sequencer 21:19:58 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:19:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:19:58 INFO] incremented to [AERI set: name U377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:19:58 INFO] T377.SIG(18)
[sigmove 21:19:58 DEBUG] transformed T377Ma.SPC -> T377MA.SPC
[sigmove 21:19:58 DEBUG] transformed T377Mb.SPC -> T377MB.SPC
[sigmove 21:19:58 DEBUG] transformed T377Mc.SPC -> T377MC.SPC
[sigmove 21:19:58 DEBUG] transformed T377Md.SPC -> T377MD.SPC
[sigmove 21:19:58 DEBUG] transformed T377Me.SPC -> T377ME.SPC
[sigmove 21:19:58 DEBUG] transformed T377Mf.SPC -> T377MF.SPC
[Status 21:19:58 INFO] data for T377 transferred to science data processing
[Tidy 21:19:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:19:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:19:58 INFO] resetting WatchDogTimer
[Status 21:19:59 INFO] Starting Set [AERI set: name U377, 6 scans, 0 angle, D16300 command]
[Ingest 21:19:59 INFO] Sending XML status message
[Status 21:19:59 INFO] Mirror angle: 0
[Mirror 21:19:59 INFO] rotating to position U
[Status 21:20:00 INFO] .SET file for ACQ96 ready
[Ingest 21:20:00 INFO] Starting acquisition
[Status 21:20:01 INFO] reading housekeeping
[Status 21:20:18 INFO] acquire complete
[Status 21:20:19 INFO] writing housekeeping
[Sequencer 21:20:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:20:19 INFO] incremented U scene to 377 completed views
[Sequencer 21:20:19 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:20:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:20:19 INFO] incremented to [AERI set: name V377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:20:19 INFO] U377.SIG(18)
[sigmove 21:20:19 DEBUG] transformed U377Ma.SPC -> U377MA.SPC
[sigmove 21:20:19 DEBUG] transformed U377Mb.SPC -> U377MB.SPC
[sigmove 21:20:19 DEBUG] transformed U377Mc.SPC -> U377MC.SPC
[sigmove 21:20:19 DEBUG] transformed U377Md.SPC -> U377MD.SPC
[sigmove 21:20:19 DEBUG] transformed U377Me.SPC -> U377ME.SPC
[sigmove 21:20:19 DEBUG] transformed U377Mf.SPC -> U377MF.SPC
[Status 21:20:19 INFO] data for U377 transferred to science data processing
[Tidy 21:20:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:20:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:20:19 INFO] resetting WatchDogTimer
[Status 21:20:20 INFO] Starting Set [AERI set: name V377, 6 scans, 0 angle, D16300 command]
[Ingest 21:20:20 INFO] Sending XML status message
[Status 21:20:20 INFO] Mirror angle: 0
[Mirror 21:20:20 INFO] rotating to position V
[Status 21:20:21 INFO] .SET file for ACQ96 ready
[Ingest 21:20:21 INFO] Starting acquisition
[Status 21:20:22 INFO] reading housekeeping
[Status 21:20:40 INFO] acquire complete
[Status 21:20:41 INFO] writing housekeeping
[Sequencer 21:20:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:20:41 INFO] incremented V scene to 377 completed views
[Sequencer 21:20:41 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:20:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:20:41 INFO] incremented to [AERI set: name W377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:20:41 INFO] V377.SIG(18)
[sigmove 21:20:41 DEBUG] transformed V377Ma.SPC -> V377MA.SPC
[sigmove 21:20:41 DEBUG] transformed V377Mb.SPC -> V377MB.SPC
[sigmove 21:20:41 DEBUG] transformed V377Mc.SPC -> V377MC.SPC
[sigmove 21:20:41 DEBUG] transformed V377Md.SPC -> V377MD.SPC
[sigmove 21:20:41 DEBUG] transformed V377Me.SPC -> V377ME.SPC
[sigmove 21:20:41 DEBUG] transformed V377Mf.SPC -> V377MF.SPC
[Status 21:20:41 INFO] data for V377 transferred to science data processing
[Tidy 21:20:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:20:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:20:41 INFO] resetting WatchDogTimer
[Status 21:20:41 INFO] Starting Set [AERI set: name W377, 6 scans, 0 angle, D16300 command]
[Ingest 21:20:41 INFO] Sending XML status message
[Status 21:20:41 INFO] Mirror angle: 0
[Mirror 21:20:42 INFO] rotating to position W
[Status 21:20:42 INFO] .SET file for ACQ96 ready
[Ingest 21:20:43 INFO] Starting acquisition
[Status 21:20:43 INFO] reading housekeeping
[Status 21:21:01 INFO] acquire complete
[Status 21:21:02 INFO] writing housekeeping
[Sequencer 21:21:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:21:02 INFO] incremented W scene to 377 completed views
[Sequencer 21:21:02 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:21:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:21:02 INFO] incremented to [AERI set: name X377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:21:02 INFO] W377.SIG(18)
[sigmove 21:21:02 DEBUG] transformed W377Ma.SPC -> W377MA.SPC
[sigmove 21:21:02 DEBUG] transformed W377Mb.SPC -> W377MB.SPC
[sigmove 21:21:02 DEBUG] transformed W377Mc.SPC -> W377MC.SPC
[sigmove 21:21:02 DEBUG] transformed W377Md.SPC -> W377MD.SPC
[sigmove 21:21:02 DEBUG] transformed W377Me.SPC -> W377ME.SPC
[sigmove 21:21:02 DEBUG] transformed W377Mf.SPC -> W377MF.SPC
[Status 21:21:02 INFO] data for W377 transferred to science data processing
[Tidy 21:21:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:21:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:21:02 INFO] resetting WatchDogTimer
[Status 21:21:02 INFO] Starting Set [AERI set: name X377, 6 scans, 0 angle, D16300 command]
[Ingest 21:21:03 INFO] Sending XML status message
[Status 21:21:03 INFO] Mirror angle: 0
[Mirror 21:21:03 INFO] rotating to position X
[Status 21:21:04 INFO] .SET file for ACQ96 ready
[Ingest 21:21:04 INFO] Starting acquisition
[Status 21:21:04 INFO] reading housekeeping
[Status 21:21:22 INFO] acquire complete
[Status 21:21:23 INFO] writing housekeeping
[Sequencer 21:21:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:21:23 INFO] incremented X scene to 377 completed views
[Sequencer 21:21:23 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:21:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:21:23 INFO] incremented to [AERI set: name Y377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:21:23 INFO] X377.SIG(18)
[sigmove 21:21:23 DEBUG] transformed X377Ma.SPC -> X377MA.SPC
[sigmove 21:21:23 DEBUG] transformed X377Mb.SPC -> X377MB.SPC
[sigmove 21:21:23 DEBUG] transformed X377Mc.SPC -> X377MC.SPC
[sigmove 21:21:23 DEBUG] transformed X377Md.SPC -> X377MD.SPC
[sigmove 21:21:23 DEBUG] transformed X377Me.SPC -> X377ME.SPC
[sigmove 21:21:23 DEBUG] transformed X377Mf.SPC -> X377MF.SPC
[Status 21:21:23 INFO] data for X377 transferred to science data processing
[Tidy 21:21:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:21:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:21:23 INFO] resetting WatchDogTimer
[Status 21:21:24 INFO] Starting Set [AERI set: name Y377, 6 scans, 0 angle, D16300 command]
[Ingest 21:21:24 INFO] Sending XML status message
[Status 21:21:24 INFO] Mirror angle: 0
[Mirror 21:21:24 INFO] rotating to position Y
[Status 21:21:25 INFO] .SET file for ACQ96 ready
[Ingest 21:21:25 INFO] Starting acquisition
[Status 21:21:26 INFO] reading housekeeping
[Status 21:21:43 INFO] acquire complete
[Status 21:21:45 INFO] writing housekeeping
[Sequencer 21:21:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:21:45 INFO] incremented Y scene to 377 completed views
[Sequencer 21:21:45 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:21:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:21:45 INFO] incremented to [AERI set: name Z377, 6 scans, 0 angle, D16300 command] set
[sigmove 21:21:45 INFO] Y377.SIG(18)
[sigmove 21:21:45 DEBUG] transformed Y377Ma.SPC -> Y377MA.SPC
[sigmove 21:21:45 DEBUG] transformed Y377Mb.SPC -> Y377MB.SPC
[sigmove 21:21:45 DEBUG] transformed Y377Mc.SPC -> Y377MC.SPC
[sigmove 21:21:45 DEBUG] transformed Y377Md.SPC -> Y377MD.SPC
[sigmove 21:21:45 DEBUG] transformed Y377Me.SPC -> Y377ME.SPC
[sigmove 21:21:45 DEBUG] transformed Y377Mf.SPC -> Y377MF.SPC
[Status 21:21:45 INFO] data for Y377 transferred to science data processing
[Tidy 21:21:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:21:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:21:45 INFO] resetting WatchDogTimer
[Status 21:21:45 INFO] Starting Set [AERI set: name Z377, 6 scans, 0 angle, D16300 command]
[Ingest 21:21:45 INFO] Sending XML status message
[Status 21:21:45 INFO] Mirror angle: 0
[Mirror 21:21:46 INFO] rotating to position Z
[Status 21:21:46 INFO] .SET file for ACQ96 ready
[Ingest 21:21:47 INFO] Starting acquisition
[Status 21:21:47 INFO] reading housekeeping
[Status 21:22:05 INFO] acquire complete
[Status 21:22:06 INFO] writing housekeeping
[Sequencer 21:22:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:22:06 INFO] incremented Z scene to 377 completed views
[Sequencer 21:22:06 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:22:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:22:06 INFO] incremented to [AERI set: name A378, 6 scans, 120 angle, D28300 command] set
[sigmove 21:22:06 INFO] Z377.SIG(18)
[sigmove 21:22:06 DEBUG] transformed Z377Ma.SPC -> Z377MA.SPC
[sigmove 21:22:06 DEBUG] transformed Z377Mb.SPC -> Z377MB.SPC
[sigmove 21:22:06 DEBUG] transformed Z377Mc.SPC -> Z377MC.SPC
[sigmove 21:22:06 DEBUG] transformed Z377Md.SPC -> Z377MD.SPC
[sigmove 21:22:06 DEBUG] transformed Z377Me.SPC -> Z377ME.SPC
[sigmove 21:22:06 DEBUG] transformed Z377Mf.SPC -> Z377MF.SPC
[Status 21:22:06 INFO] data for Z377 transferred to science data processing
[Tidy 21:22:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:22:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:22:06 INFO] resetting WatchDogTimer
[Status 21:22:06 INFO] Starting Set [AERI set: name A378, 6 scans, 120 angle, D28300 command]
[Ingest 21:22:06 INFO] Sending XML status message
[Status 21:22:06 INFO] Mirror angle: 120
[Mirror 21:22:07 INFO] rotating to position A
[Status 21:22:08 INFO] .SET file for ACQ96 ready
[Ingest 21:22:09 INFO] Starting acquisition
[Status 21:22:09 INFO] reading housekeeping
[Status 21:22:27 INFO] acquire complete
[Status 21:22:28 INFO] writing housekeeping
[Sequencer 21:22:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:22:28 INFO] incremented A scene to 378 completed views
[Sequencer 21:22:28 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:22:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:22:28 INFO] incremented to [AERI set: name H378, 6 scans, 60 angle, D22500 command] set
[sigmove 21:22:28 INFO] A378.SIG(18)
[sigmove 21:22:28 DEBUG] transformed A378Ma.SPC -> A378MA.SPC
[sigmove 21:22:28 DEBUG] transformed A378Mb.SPC -> A378MB.SPC
[sigmove 21:22:28 DEBUG] transformed A378Mc.SPC -> A378MC.SPC
[sigmove 21:22:28 DEBUG] transformed A378Md.SPC -> A378MD.SPC
[sigmove 21:22:28 DEBUG] transformed A378Me.SPC -> A378ME.SPC
[sigmove 21:22:28 DEBUG] transformed A378Mf.SPC -> A378MF.SPC
[Status 21:22:28 INFO] data for A378 transferred to science data processing
[Tidy 21:22:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:22:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:22:28 INFO] resetting WatchDogTimer
[Status 21:22:29 INFO] Starting Set [AERI set: name H378, 6 scans, 60 angle, D22500 command]
[Ingest 21:22:29 INFO] Sending XML status message
[Status 21:22:29 INFO] Mirror angle: 60
[Mirror 21:22:29 INFO] rotating to position H
[Status 21:22:30 INFO] .SET file for ACQ96 ready
[Ingest 21:22:31 INFO] Starting acquisition
[Status 21:22:31 INFO] reading housekeeping
[Status 21:22:48 INFO] acquire complete
[Status 21:22:50 INFO] writing housekeeping
[Sequencer 21:22:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:22:50 INFO] incremented H scene to 378 completed views
[Sequencer 21:22:50 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:22:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:22:50 INFO] incremented to [AERI set: name S378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:22:50 INFO] H378.SIG(18)
[sigmove 21:22:50 DEBUG] transformed H378Ma.SPC -> H378MA.SPC
[sigmove 21:22:50 DEBUG] transformed H378Mb.SPC -> H378MB.SPC
[sigmove 21:22:50 DEBUG] transformed H378Mc.SPC -> H378MC.SPC
[sigmove 21:22:50 DEBUG] transformed H378Md.SPC -> H378MD.SPC
[sigmove 21:22:50 DEBUG] transformed H378Me.SPC -> H378ME.SPC
[sigmove 21:22:50 DEBUG] transformed H378Mf.SPC -> H378MF.SPC
[Status 21:22:50 INFO] data for H378 transferred to science data processing
[Tidy 21:22:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:22:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:22:50 INFO] resetting WatchDogTimer
[Status 21:22:50 INFO] Starting Set [AERI set: name S378, 6 scans, 0 angle, D16300 command]
[Ingest 21:22:50 INFO] Sending XML status message
[Status 21:22:50 INFO] Mirror angle: 0
[Mirror 21:22:51 INFO] rotating to position S
[Status 21:22:52 INFO] .SET file for ACQ96 ready
[Ingest 21:22:52 INFO] Starting acquisition
[Status 21:22:53 INFO] reading housekeeping
[Status 21:23:10 INFO] acquire complete
[Status 21:23:11 INFO] writing housekeeping
[Sequencer 21:23:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:23:11 INFO] incremented S scene to 378 completed views
[Sequencer 21:23:11 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:23:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:23:11 INFO] incremented to [AERI set: name T378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:23:11 INFO] S378.SIG(18)
[sigmove 21:23:11 DEBUG] transformed S378Ma.SPC -> S378MA.SPC
[sigmove 21:23:11 DEBUG] transformed S378Mb.SPC -> S378MB.SPC
[sigmove 21:23:11 DEBUG] transformed S378Mc.SPC -> S378MC.SPC
[sigmove 21:23:11 DEBUG] transformed S378Md.SPC -> S378MD.SPC
[sigmove 21:23:11 DEBUG] transformed S378Me.SPC -> S378ME.SPC
[sigmove 21:23:11 DEBUG] transformed S378Mf.SPC -> S378MF.SPC
[Status 21:23:11 INFO] data for S378 transferred to science data processing
[Tidy 21:23:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:23:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:23:11 INFO] resetting WatchDogTimer
[Status 21:23:12 INFO] Starting Set [AERI set: name T378, 6 scans, 0 angle, D16300 command]
[Ingest 21:23:12 INFO] Sending XML status message
[Status 21:23:12 INFO] Mirror angle: 0
[Mirror 21:23:12 INFO] rotating to position T
[Status 21:23:13 INFO] .SET file for ACQ96 ready
[Ingest 21:23:13 INFO] Starting acquisition
[Status 21:23:13 INFO] reading housekeeping
[Status 21:23:31 INFO] acquire complete
[Status 21:23:32 INFO] writing housekeeping
[Sequencer 21:23:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:23:32 INFO] incremented T scene to 378 completed views
[Sequencer 21:23:32 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:23:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:23:32 INFO] incremented to [AERI set: name U378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:23:32 INFO] T378.SIG(18)
[sigmove 21:23:32 DEBUG] transformed T378Ma.SPC -> T378MA.SPC
[sigmove 21:23:32 DEBUG] transformed T378Mb.SPC -> T378MB.SPC
[sigmove 21:23:32 DEBUG] transformed T378Mc.SPC -> T378MC.SPC
[sigmove 21:23:32 DEBUG] transformed T378Md.SPC -> T378MD.SPC
[sigmove 21:23:32 DEBUG] transformed T378Me.SPC -> T378ME.SPC
[sigmove 21:23:32 DEBUG] transformed T378Mf.SPC -> T378MF.SPC
[Status 21:23:32 INFO] data for T378 transferred to science data processing
[Tidy 21:23:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:23:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:23:32 INFO] resetting WatchDogTimer
[Status 21:23:33 INFO] Starting Set [AERI set: name U378, 6 scans, 0 angle, D16300 command]
[Ingest 21:23:33 INFO] Sending XML status message
[Status 21:23:33 INFO] Mirror angle: 0
[Mirror 21:23:33 INFO] rotating to position U
[Status 21:23:34 INFO] .SET file for ACQ96 ready
[Ingest 21:23:34 INFO] Starting acquisition
[Status 21:23:35 INFO] reading housekeeping
[Status 21:23:52 INFO] acquire complete
[Status 21:23:54 INFO] writing housekeeping
[Sequencer 21:23:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:23:54 INFO] incremented U scene to 378 completed views
[Sequencer 21:23:54 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:23:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:23:54 INFO] incremented to [AERI set: name V378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:23:54 INFO] U378.SIG(18)
[sigmove 21:23:54 DEBUG] transformed U378Ma.SPC -> U378MA.SPC
[sigmove 21:23:54 DEBUG] transformed U378Mb.SPC -> U378MB.SPC
[sigmove 21:23:54 DEBUG] transformed U378Mc.SPC -> U378MC.SPC
[sigmove 21:23:54 DEBUG] transformed U378Md.SPC -> U378MD.SPC
[sigmove 21:23:54 DEBUG] transformed U378Me.SPC -> U378ME.SPC
[sigmove 21:23:54 DEBUG] transformed U378Mf.SPC -> U378MF.SPC
[Status 21:23:54 INFO] data for U378 transferred to science data processing
[Tidy 21:23:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:23:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:23:54 INFO] resetting WatchDogTimer
[Status 21:23:54 INFO] Starting Set [AERI set: name V378, 6 scans, 0 angle, D16300 command]
[Ingest 21:23:54 INFO] Sending XML status message
[Status 21:23:54 INFO] Mirror angle: 0
[Mirror 21:23:55 INFO] rotating to position V
[Status 21:23:55 INFO] .SET file for ACQ96 ready
[Ingest 21:23:56 INFO] Starting acquisition
[Status 21:23:56 INFO] reading housekeeping
[Status 21:24:14 INFO] acquire complete
[Status 21:24:15 INFO] writing housekeeping
[Sequencer 21:24:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:24:15 INFO] incremented V scene to 378 completed views
[Sequencer 21:24:15 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:24:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:24:15 INFO] incremented to [AERI set: name W378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:24:15 INFO] V378.SIG(18)
[sigmove 21:24:15 DEBUG] transformed V378Ma.SPC -> V378MA.SPC
[sigmove 21:24:15 DEBUG] transformed V378Mb.SPC -> V378MB.SPC
[sigmove 21:24:15 DEBUG] transformed V378Mc.SPC -> V378MC.SPC
[sigmove 21:24:15 DEBUG] transformed V378Md.SPC -> V378MD.SPC
[sigmove 21:24:15 DEBUG] transformed V378Me.SPC -> V378ME.SPC
[sigmove 21:24:15 DEBUG] transformed V378Mf.SPC -> V378MF.SPC
[Status 21:24:15 INFO] data for V378 transferred to science data processing
[Tidy 21:24:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:24:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:24:15 INFO] resetting WatchDogTimer
[Status 21:24:15 INFO] Starting Set [AERI set: name W378, 6 scans, 0 angle, D16300 command]
[Ingest 21:24:15 INFO] Sending XML status message
[Status 21:24:15 INFO] Mirror angle: 0
[Mirror 21:24:16 INFO] rotating to position W
[Status 21:24:16 INFO] .SET file for ACQ96 ready
[Ingest 21:24:17 INFO] Starting acquisition
[Status 21:24:17 INFO] reading housekeeping
[Status 21:24:35 INFO] acquire complete
[Status 21:24:36 INFO] writing housekeeping
[Sequencer 21:24:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:24:36 INFO] incremented W scene to 378 completed views
[Sequencer 21:24:36 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:24:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:24:36 INFO] incremented to [AERI set: name X378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:24:36 INFO] W378.SIG(18)
[sigmove 21:24:36 DEBUG] transformed W378Ma.SPC -> W378MA.SPC
[sigmove 21:24:36 DEBUG] transformed W378Mb.SPC -> W378MB.SPC
[sigmove 21:24:36 DEBUG] transformed W378Mc.SPC -> W378MC.SPC
[sigmove 21:24:36 DEBUG] transformed W378Md.SPC -> W378MD.SPC
[sigmove 21:24:36 DEBUG] transformed W378Me.SPC -> W378ME.SPC
[sigmove 21:24:36 DEBUG] transformed W378Mf.SPC -> W378MF.SPC
[Status 21:24:36 INFO] data for W378 transferred to science data processing
[Tidy 21:24:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:24:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:24:36 INFO] resetting WatchDogTimer
[Status 21:24:37 INFO] Starting Set [AERI set: name X378, 6 scans, 0 angle, D16300 command]
[Ingest 21:24:37 INFO] Sending XML status message
[Status 21:24:37 INFO] Mirror angle: 0
[Mirror 21:24:37 INFO] rotating to position X
[Status 21:24:38 INFO] .SET file for ACQ96 ready
[Ingest 21:24:38 INFO] Starting acquisition
[Status 21:24:39 INFO] reading housekeeping
[Status 21:24:56 INFO] acquire complete
[Status 21:24:58 INFO] writing housekeeping
[Sequencer 21:24:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:24:58 INFO] incremented X scene to 378 completed views
[Sequencer 21:24:58 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:24:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:24:58 INFO] incremented to [AERI set: name Y378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:24:58 INFO] X378.SIG(18)
[sigmove 21:24:58 DEBUG] transformed X378Ma.SPC -> X378MA.SPC
[sigmove 21:24:58 DEBUG] transformed X378Mb.SPC -> X378MB.SPC
[sigmove 21:24:58 DEBUG] transformed X378Mc.SPC -> X378MC.SPC
[sigmove 21:24:58 DEBUG] transformed X378Md.SPC -> X378MD.SPC
[sigmove 21:24:58 DEBUG] transformed X378Me.SPC -> X378ME.SPC
[sigmove 21:24:58 DEBUG] transformed X378Mf.SPC -> X378MF.SPC
[Status 21:24:58 INFO] data for X378 transferred to science data processing
[Tidy 21:24:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:24:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:24:58 INFO] resetting WatchDogTimer
[Status 21:24:58 INFO] Starting Set [AERI set: name Y378, 6 scans, 0 angle, D16300 command]
[Ingest 21:24:58 INFO] Sending XML status message
[Status 21:24:58 INFO] Mirror angle: 0
[Mirror 21:24:58 INFO] rotating to position Y
[Status 21:24:59 INFO] .SET file for ACQ96 ready
[Ingest 21:24:59 INFO] Starting acquisition
[Status 21:25:00 INFO] reading housekeeping
[Status 21:25:18 INFO] acquire complete
[Status 21:25:19 INFO] writing housekeeping
[Sequencer 21:25:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:25:19 INFO] incremented Y scene to 378 completed views
[Sequencer 21:25:19 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:25:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:25:19 INFO] incremented to [AERI set: name Z378, 6 scans, 0 angle, D16300 command] set
[sigmove 21:25:19 INFO] Y378.SIG(18)
[sigmove 21:25:19 DEBUG] transformed Y378Ma.SPC -> Y378MA.SPC
[sigmove 21:25:19 DEBUG] transformed Y378Mb.SPC -> Y378MB.SPC
[sigmove 21:25:19 DEBUG] transformed Y378Mc.SPC -> Y378MC.SPC
[sigmove 21:25:19 DEBUG] transformed Y378Md.SPC -> Y378MD.SPC
[sigmove 21:25:19 DEBUG] transformed Y378Me.SPC -> Y378ME.SPC
[sigmove 21:25:19 DEBUG] transformed Y378Mf.SPC -> Y378MF.SPC
[Status 21:25:19 INFO] data for Y378 transferred to science data processing
[Tidy 21:25:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:25:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:25:19 INFO] resetting WatchDogTimer
[Status 21:25:19 INFO] Starting Set [AERI set: name Z378, 6 scans, 0 angle, D16300 command]
[Ingest 21:25:19 INFO] Sending XML status message
[Status 21:25:19 INFO] Mirror angle: 0
[Mirror 21:25:20 INFO] rotating to position Z
[Status 21:25:20 INFO] .SET file for ACQ96 ready
[Ingest 21:25:21 INFO] Starting acquisition
[Status 21:25:21 INFO] reading housekeeping
[Status 21:25:39 INFO] acquire complete
[Status 21:25:40 INFO] writing housekeeping
[Sequencer 21:25:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:25:40 INFO] incremented Z scene to 378 completed views
[Sequencer 21:25:40 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:25:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:25:40 INFO] incremented to [AERI set: name H379, 6 scans, 60 angle, D22500 command] set
[sigmove 21:25:40 INFO] Z378.SIG(18)
[sigmove 21:25:40 DEBUG] transformed Z378Ma.SPC -> Z378MA.SPC
[sigmove 21:25:40 DEBUG] transformed Z378Mb.SPC -> Z378MB.SPC
[sigmove 21:25:40 DEBUG] transformed Z378Mc.SPC -> Z378MC.SPC
[sigmove 21:25:40 DEBUG] transformed Z378Md.SPC -> Z378MD.SPC
[sigmove 21:25:40 DEBUG] transformed Z378Me.SPC -> Z378ME.SPC
[sigmove 21:25:40 DEBUG] transformed Z378Mf.SPC -> Z378MF.SPC
[Status 21:25:40 INFO] data for Z378 transferred to science data processing
[Tidy 21:25:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:25:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:25:40 INFO] resetting WatchDogTimer
[Status 21:25:41 INFO] Starting Set [AERI set: name H379, 6 scans, 60 angle, D22500 command]
[Ingest 21:25:41 INFO] Sending XML status message
[Status 21:25:41 INFO] Mirror angle: 60
[Mirror 21:25:41 INFO] rotating to position H
[Status 21:25:42 INFO] .SET file for ACQ96 ready
[Ingest 21:25:43 INFO] Starting acquisition
[Status 21:25:43 INFO] reading housekeeping
[Status 21:26:00 INFO] acquire complete
[Status 21:26:01 INFO] writing housekeeping
[Sequencer 21:26:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:26:01 INFO] incremented H scene to 379 completed views
[Sequencer 21:26:01 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:26:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:26:01 INFO] incremented to [AERI set: name A379, 6 scans, 120 angle, D28300 command] set
[sigmove 21:26:01 INFO] H379.SIG(18)
[sigmove 21:26:01 DEBUG] transformed H379Ma.SPC -> H379MA.SPC
[sigmove 21:26:01 DEBUG] transformed H379Mb.SPC -> H379MB.SPC
[sigmove 21:26:01 DEBUG] transformed H379Mc.SPC -> H379MC.SPC
[sigmove 21:26:01 DEBUG] transformed H379Md.SPC -> H379MD.SPC
[sigmove 21:26:01 DEBUG] transformed H379Me.SPC -> H379ME.SPC
[sigmove 21:26:01 DEBUG] transformed H379Mf.SPC -> H379MF.SPC
[Status 21:26:01 INFO] data for H379 transferred to science data processing
[Tidy 21:26:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:26:02 INFO] A377.FIN(19),H377.FIN(19),S377.FIN(19),T377.FIN(19),U377.FIN(19),V377.FIN(19),W377.FIN(19),X377.FIN(19),Y377.FIN(19),Z377.FIN(19),A378.FIN(19),H378.FIN(19),S378.FIN(19),T378.FIN(19),U378.FIN(19),V378.FIN(19),W378.FIN(19),X378.FIN(19),Y378.FIN(19),Z378.FIN(19)
[sigmove 21:26:02 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:26:02 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:26:08 DEBUG] done zipping
[WatchDog 21:26:09 INFO] resetting WatchDogTimer
[Status 21:26:09 INFO] Starting Set [AERI set: name A379, 6 scans, 120 angle, D28300 command]
[Ingest 21:26:09 INFO] Sending XML status message
[Status 21:26:09 INFO] Mirror angle: 120
[Mirror 21:26:10 INFO] rotating to position A
[Status 21:26:11 INFO] .SET file for ACQ96 ready
[Ingest 21:26:11 INFO] Starting acquisition
[Status 21:26:12 INFO] reading housekeeping
[Status 21:26:29 INFO] acquire complete
[Status 21:26:31 INFO] writing housekeeping
[Sequencer 21:26:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:26:31 INFO] incremented A scene to 379 completed views
[Sequencer 21:26:31 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:26:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:26:31 INFO] incremented to [AERI set: name S379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:26:31 INFO] A379.SIG(18)
[sigmove 21:26:31 DEBUG] transformed A379Ma.SPC -> A379MA.SPC
[sigmove 21:26:31 DEBUG] transformed A379Mb.SPC -> A379MB.SPC
[sigmove 21:26:31 DEBUG] transformed A379Mc.SPC -> A379MC.SPC
[sigmove 21:26:31 DEBUG] transformed A379Md.SPC -> A379MD.SPC
[sigmove 21:26:31 DEBUG] transformed A379Me.SPC -> A379ME.SPC
[sigmove 21:26:31 DEBUG] transformed A379Mf.SPC -> A379MF.SPC
[Status 21:26:31 INFO] data for A379 transferred to science data processing
[Tidy 21:26:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:26:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:26:31 INFO] resetting WatchDogTimer
[Status 21:26:31 INFO] Starting Set [AERI set: name S379, 6 scans, 0 angle, D16300 command]
[Ingest 21:26:31 INFO] Sending XML status message
[Status 21:26:31 INFO] Mirror angle: 0
[Mirror 21:26:32 INFO] rotating to position S
[Status 21:26:33 INFO] .SET file for ACQ96 ready
[Ingest 21:26:34 INFO] Starting acquisition
[Status 21:26:34 INFO] reading housekeeping
[Status 21:26:52 INFO] acquire complete
[Status 21:26:53 INFO] writing housekeeping
[Sequencer 21:26:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:26:53 INFO] incremented S scene to 379 completed views
[Sequencer 21:26:53 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:26:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:26:53 INFO] incremented to [AERI set: name T379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:26:53 INFO] S379.SIG(18)
[sigmove 21:26:53 DEBUG] transformed S379Ma.SPC -> S379MA.SPC
[sigmove 21:26:53 DEBUG] transformed S379Mb.SPC -> S379MB.SPC
[sigmove 21:26:53 DEBUG] transformed S379Mc.SPC -> S379MC.SPC
[sigmove 21:26:53 DEBUG] transformed S379Md.SPC -> S379MD.SPC
[sigmove 21:26:53 DEBUG] transformed S379Me.SPC -> S379ME.SPC
[sigmove 21:26:53 DEBUG] transformed S379Mf.SPC -> S379MF.SPC
[Status 21:26:53 INFO] data for S379 transferred to science data processing
[Tidy 21:26:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:26:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:26:53 INFO] resetting WatchDogTimer
[Status 21:26:54 INFO] Starting Set [AERI set: name T379, 6 scans, 0 angle, D16300 command]
[Ingest 21:26:54 INFO] Sending XML status message
[Status 21:26:54 INFO] Mirror angle: 0
[Mirror 21:26:54 INFO] rotating to position T
[Status 21:26:55 INFO] .SET file for ACQ96 ready
[Ingest 21:26:55 INFO] Starting acquisition
[Status 21:26:56 INFO] reading housekeeping
[Status 21:27:13 INFO] acquire complete
[Status 21:27:14 INFO] writing housekeeping
[Sequencer 21:27:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:27:14 INFO] incremented T scene to 379 completed views
[Sequencer 21:27:14 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:27:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:27:14 INFO] incremented to [AERI set: name U379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:27:14 INFO] T379.SIG(18)
[sigmove 21:27:14 DEBUG] transformed T379Ma.SPC -> T379MA.SPC
[sigmove 21:27:14 DEBUG] transformed T379Mb.SPC -> T379MB.SPC
[sigmove 21:27:14 DEBUG] transformed T379Mc.SPC -> T379MC.SPC
[sigmove 21:27:14 DEBUG] transformed T379Md.SPC -> T379MD.SPC
[sigmove 21:27:14 DEBUG] transformed T379Me.SPC -> T379ME.SPC
[sigmove 21:27:14 DEBUG] transformed T379Mf.SPC -> T379MF.SPC
[Status 21:27:14 INFO] data for T379 transferred to science data processing
[Tidy 21:27:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:27:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:27:14 INFO] resetting WatchDogTimer
[Status 21:27:15 INFO] Starting Set [AERI set: name U379, 6 scans, 0 angle, D16300 command]
[Ingest 21:27:15 INFO] Sending XML status message
[Status 21:27:15 INFO] Mirror angle: 0
[Mirror 21:27:15 INFO] rotating to position U
[Status 21:27:16 INFO] .SET file for ACQ96 ready
[Ingest 21:27:16 INFO] Starting acquisition
[Status 21:27:17 INFO] reading housekeeping
[Status 21:27:34 INFO] acquire complete
[Status 21:27:36 INFO] writing housekeeping
[Sequencer 21:27:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:27:36 INFO] incremented U scene to 379 completed views
[Sequencer 21:27:36 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:27:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:27:36 INFO] incremented to [AERI set: name V379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:27:36 INFO] U379.SIG(18)
[sigmove 21:27:36 DEBUG] transformed U379Ma.SPC -> U379MA.SPC
[sigmove 21:27:36 DEBUG] transformed U379Mb.SPC -> U379MB.SPC
[sigmove 21:27:36 DEBUG] transformed U379Mc.SPC -> U379MC.SPC
[sigmove 21:27:36 DEBUG] transformed U379Md.SPC -> U379MD.SPC
[sigmove 21:27:36 DEBUG] transformed U379Me.SPC -> U379ME.SPC
[sigmove 21:27:36 DEBUG] transformed U379Mf.SPC -> U379MF.SPC
[Status 21:27:36 INFO] data for U379 transferred to science data processing
[Tidy 21:27:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:27:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:27:36 INFO] resetting WatchDogTimer
[Status 21:27:36 INFO] Starting Set [AERI set: name V379, 6 scans, 0 angle, D16300 command]
[Ingest 21:27:36 INFO] Sending XML status message
[Status 21:27:36 INFO] Mirror angle: 0
[Mirror 21:27:37 INFO] rotating to position V
[Status 21:27:37 INFO] .SET file for ACQ96 ready
[Ingest 21:27:38 INFO] Starting acquisition
[Status 21:27:38 INFO] reading housekeeping
[Status 21:27:56 INFO] acquire complete
[Status 21:27:57 INFO] writing housekeeping
[Sequencer 21:27:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:27:57 INFO] incremented V scene to 379 completed views
[Sequencer 21:27:57 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:27:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:27:57 INFO] incremented to [AERI set: name W379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:27:57 INFO] V379.SIG(18)
[sigmove 21:27:57 DEBUG] transformed V379Ma.SPC -> V379MA.SPC
[sigmove 21:27:57 DEBUG] transformed V379Mb.SPC -> V379MB.SPC
[sigmove 21:27:57 DEBUG] transformed V379Mc.SPC -> V379MC.SPC
[sigmove 21:27:57 DEBUG] transformed V379Md.SPC -> V379MD.SPC
[sigmove 21:27:57 DEBUG] transformed V379Me.SPC -> V379ME.SPC
[sigmove 21:27:57 DEBUG] transformed V379Mf.SPC -> V379MF.SPC
[Status 21:27:57 INFO] data for V379 transferred to science data processing
[Tidy 21:27:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:27:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:27:57 INFO] resetting WatchDogTimer
[Status 21:27:57 INFO] Starting Set [AERI set: name W379, 6 scans, 0 angle, D16300 command]
[Ingest 21:27:57 INFO] Sending XML status message
[Status 21:27:57 INFO] Mirror angle: 0
[Mirror 21:27:58 INFO] rotating to position W
[Status 21:27:59 INFO] .SET file for ACQ96 ready
[Ingest 21:27:59 INFO] Starting acquisition
[Status 21:28:00 INFO] reading housekeeping
[Status 21:28:17 INFO] acquire complete
[Status 21:28:18 INFO] writing housekeeping
[Sequencer 21:28:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:28:18 INFO] incremented W scene to 379 completed views
[Sequencer 21:28:18 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:28:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:28:18 INFO] incremented to [AERI set: name X379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:28:18 INFO] W379.SIG(18)
[sigmove 21:28:18 DEBUG] transformed W379Ma.SPC -> W379MA.SPC
[sigmove 21:28:18 DEBUG] transformed W379Mb.SPC -> W379MB.SPC
[sigmove 21:28:18 DEBUG] transformed W379Mc.SPC -> W379MC.SPC
[sigmove 21:28:18 DEBUG] transformed W379Md.SPC -> W379MD.SPC
[sigmove 21:28:18 DEBUG] transformed W379Me.SPC -> W379ME.SPC
[sigmove 21:28:18 DEBUG] transformed W379Mf.SPC -> W379MF.SPC
[Status 21:28:18 INFO] data for W379 transferred to science data processing
[Tidy 21:28:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:28:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:28:18 INFO] resetting WatchDogTimer
[Status 21:28:19 INFO] Starting Set [AERI set: name X379, 6 scans, 0 angle, D16300 command]
[Ingest 21:28:19 INFO] Sending XML status message
[Status 21:28:19 INFO] Mirror angle: 0
[Mirror 21:28:19 INFO] rotating to position X
[Status 21:28:20 INFO] .SET file for ACQ96 ready
[Ingest 21:28:20 INFO] Starting acquisition
[Status 21:28:21 INFO] reading housekeeping
[Status 21:28:38 INFO] acquire complete
[Status 21:28:40 INFO] writing housekeeping
[Sequencer 21:28:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:28:40 INFO] incremented X scene to 379 completed views
[Sequencer 21:28:40 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:28:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:28:40 INFO] incremented to [AERI set: name Y379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:28:40 INFO] X379.SIG(18)
[sigmove 21:28:40 DEBUG] transformed X379Ma.SPC -> X379MA.SPC
[sigmove 21:28:40 DEBUG] transformed X379Mb.SPC -> X379MB.SPC
[sigmove 21:28:40 DEBUG] transformed X379Mc.SPC -> X379MC.SPC
[sigmove 21:28:40 DEBUG] transformed X379Md.SPC -> X379MD.SPC
[sigmove 21:28:40 DEBUG] transformed X379Me.SPC -> X379ME.SPC
[sigmove 21:28:40 DEBUG] transformed X379Mf.SPC -> X379MF.SPC
[Status 21:28:40 INFO] data for X379 transferred to science data processing
[Tidy 21:28:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:28:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:28:40 INFO] resetting WatchDogTimer
[Status 21:28:40 INFO] Starting Set [AERI set: name Y379, 6 scans, 0 angle, D16300 command]
[Ingest 21:28:40 INFO] Sending XML status message
[Status 21:28:40 INFO] Mirror angle: 0
[Mirror 21:28:41 INFO] rotating to position Y
[Status 21:28:41 INFO] .SET file for ACQ96 ready
[Ingest 21:28:42 INFO] Starting acquisition
[Status 21:28:42 INFO] reading housekeeping
[Status 21:29:00 INFO] acquire complete
[Status 21:29:01 INFO] writing housekeeping
[Sequencer 21:29:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:29:01 INFO] incremented Y scene to 379 completed views
[Sequencer 21:29:01 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:29:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:29:01 INFO] incremented to [AERI set: name Z379, 6 scans, 0 angle, D16300 command] set
[sigmove 21:29:01 INFO] Y379.SIG(18)
[sigmove 21:29:01 DEBUG] transformed Y379Ma.SPC -> Y379MA.SPC
[sigmove 21:29:01 DEBUG] transformed Y379Mb.SPC -> Y379MB.SPC
[sigmove 21:29:01 DEBUG] transformed Y379Mc.SPC -> Y379MC.SPC
[sigmove 21:29:01 DEBUG] transformed Y379Md.SPC -> Y379MD.SPC
[sigmove 21:29:01 DEBUG] transformed Y379Me.SPC -> Y379ME.SPC
[sigmove 21:29:01 DEBUG] transformed Y379Mf.SPC -> Y379MF.SPC
[Status 21:29:01 INFO] data for Y379 transferred to science data processing
[Tidy 21:29:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:29:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:29:01 INFO] resetting WatchDogTimer
[Status 21:29:01 INFO] Starting Set [AERI set: name Z379, 6 scans, 0 angle, D16300 command]
[Ingest 21:29:01 INFO] Sending XML status message
[Status 21:29:01 INFO] Mirror angle: 0
[Mirror 21:29:02 INFO] rotating to position Z
[Status 21:29:02 INFO] .SET file for ACQ96 ready
[Ingest 21:29:03 INFO] Starting acquisition
[Status 21:29:03 INFO] reading housekeeping
[Status 21:29:21 INFO] acquire complete
[Status 21:29:22 INFO] writing housekeeping
[Sequencer 21:29:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:29:22 INFO] incremented Z scene to 379 completed views
[Sequencer 21:29:22 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:29:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:29:22 INFO] incremented to [AERI set: name A380, 6 scans, 120 angle, D28300 command] set
[sigmove 21:29:22 INFO] Z379.SIG(18)
[sigmove 21:29:22 DEBUG] transformed Z379Ma.SPC -> Z379MA.SPC
[sigmove 21:29:22 DEBUG] transformed Z379Mb.SPC -> Z379MB.SPC
[sigmove 21:29:22 DEBUG] transformed Z379Mc.SPC -> Z379MC.SPC
[sigmove 21:29:22 DEBUG] transformed Z379Md.SPC -> Z379MD.SPC
[sigmove 21:29:22 DEBUG] transformed Z379Me.SPC -> Z379ME.SPC
[sigmove 21:29:22 DEBUG] transformed Z379Mf.SPC -> Z379MF.SPC
[Status 21:29:22 INFO] data for Z379 transferred to science data processing
[Tidy 21:29:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:29:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:29:22 INFO] resetting WatchDogTimer
[Status 21:29:23 INFO] Starting Set [AERI set: name A380, 6 scans, 120 angle, D28300 command]
[Ingest 21:29:23 INFO] Sending XML status message
[Status 21:29:23 INFO] Mirror angle: 120
[Mirror 21:29:23 INFO] rotating to position A
[Status 21:29:25 INFO] .SET file for ACQ96 ready
[Ingest 21:29:25 INFO] Starting acquisition
[Status 21:29:26 INFO] reading housekeeping
[Status 21:29:43 INFO] acquire complete
[Status 21:29:45 INFO] writing housekeeping
[Sequencer 21:29:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:29:45 INFO] incremented A scene to 380 completed views
[Sequencer 21:29:45 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:29:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:29:45 INFO] incremented to [AERI set: name H380, 6 scans, 60 angle, D22500 command] set
[sigmove 21:29:45 INFO] A380.SIG(18)
[sigmove 21:29:45 DEBUG] transformed A380Ma.SPC -> A380MA.SPC
[sigmove 21:29:45 DEBUG] transformed A380Mb.SPC -> A380MB.SPC
[sigmove 21:29:45 DEBUG] transformed A380Mc.SPC -> A380MC.SPC
[sigmove 21:29:45 DEBUG] transformed A380Md.SPC -> A380MD.SPC
[sigmove 21:29:45 DEBUG] transformed A380Me.SPC -> A380ME.SPC
[sigmove 21:29:45 DEBUG] transformed A380Mf.SPC -> A380MF.SPC
[Status 21:29:45 INFO] data for A380 transferred to science data processing
[Tidy 21:29:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:29:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:29:45 INFO] resetting WatchDogTimer
[Status 21:29:45 INFO] Starting Set [AERI set: name H380, 6 scans, 60 angle, D22500 command]
[Ingest 21:29:45 INFO] Sending XML status message
[Status 21:29:45 INFO] Mirror angle: 60
[Mirror 21:29:46 INFO] rotating to position H
[Status 21:29:47 INFO] .SET file for ACQ96 ready
[Ingest 21:29:47 INFO] Starting acquisition
[Status 21:29:48 INFO] reading housekeeping
[Status 21:30:05 INFO] acquire complete
[Status 21:30:06 INFO] writing housekeeping
[Sequencer 21:30:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:30:06 INFO] incremented H scene to 380 completed views
[Sequencer 21:30:06 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:30:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:30:06 INFO] incremented to [AERI set: name S380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:30:06 INFO] H380.SIG(18)
[sigmove 21:30:06 DEBUG] transformed H380Ma.SPC -> H380MA.SPC
[sigmove 21:30:06 DEBUG] transformed H380Mb.SPC -> H380MB.SPC
[sigmove 21:30:06 DEBUG] transformed H380Mc.SPC -> H380MC.SPC
[sigmove 21:30:06 DEBUG] transformed H380Md.SPC -> H380MD.SPC
[sigmove 21:30:06 DEBUG] transformed H380Me.SPC -> H380ME.SPC
[sigmove 21:30:06 DEBUG] transformed H380Mf.SPC -> H380MF.SPC
[Status 21:30:06 INFO] data for H380 transferred to science data processing
[Tidy 21:30:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:30:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:30:06 INFO] resetting WatchDogTimer
[Status 21:30:06 INFO] Starting Set [AERI set: name S380, 6 scans, 0 angle, D16300 command]
[Ingest 21:30:06 INFO] Sending XML status message
[Status 21:30:06 INFO] Mirror angle: 0
[Mirror 21:30:07 INFO] rotating to position S
[Status 21:30:08 INFO] .SET file for ACQ96 ready
[Ingest 21:30:08 INFO] Starting acquisition
[Status 21:30:09 INFO] reading housekeeping
[Status 21:30:26 INFO] acquire complete
[Status 21:30:27 INFO] writing housekeeping
[Sequencer 21:30:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:30:27 INFO] incremented S scene to 380 completed views
[Sequencer 21:30:27 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:30:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:30:27 INFO] incremented to [AERI set: name T380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:30:27 INFO] S380.SIG(18)
[sigmove 21:30:27 DEBUG] transformed S380Ma.SPC -> S380MA.SPC
[sigmove 21:30:27 DEBUG] transformed S380Mb.SPC -> S380MB.SPC
[sigmove 21:30:27 DEBUG] transformed S380Mc.SPC -> S380MC.SPC
[sigmove 21:30:27 DEBUG] transformed S380Md.SPC -> S380MD.SPC
[sigmove 21:30:27 DEBUG] transformed S380Me.SPC -> S380ME.SPC
[sigmove 21:30:27 DEBUG] transformed S380Mf.SPC -> S380MF.SPC
[Status 21:30:27 INFO] data for S380 transferred to science data processing
[Tidy 21:30:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:30:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:30:27 INFO] resetting WatchDogTimer
[Status 21:30:28 INFO] Starting Set [AERI set: name T380, 6 scans, 0 angle, D16300 command]
[Ingest 21:30:28 INFO] Sending XML status message
[Status 21:30:28 INFO] Mirror angle: 0
[Mirror 21:30:28 INFO] rotating to position T
[Status 21:30:29 INFO] .SET file for ACQ96 ready
[Ingest 21:30:29 INFO] Starting acquisition
[Status 21:30:30 INFO] reading housekeeping
[Status 21:30:47 INFO] acquire complete
[Status 21:30:49 INFO] writing housekeeping
[Sequencer 21:30:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:30:49 INFO] incremented T scene to 380 completed views
[Sequencer 21:30:49 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:30:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:30:49 INFO] incremented to [AERI set: name U380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:30:49 INFO] T380.SIG(18)
[sigmove 21:30:49 DEBUG] transformed T380Ma.SPC -> T380MA.SPC
[sigmove 21:30:49 DEBUG] transformed T380Mb.SPC -> T380MB.SPC
[sigmove 21:30:49 DEBUG] transformed T380Mc.SPC -> T380MC.SPC
[sigmove 21:30:49 DEBUG] transformed T380Md.SPC -> T380MD.SPC
[sigmove 21:30:49 DEBUG] transformed T380Me.SPC -> T380ME.SPC
[sigmove 21:30:49 DEBUG] transformed T380Mf.SPC -> T380MF.SPC
[Status 21:30:49 INFO] data for T380 transferred to science data processing
[Tidy 21:30:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:30:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:30:49 INFO] resetting WatchDogTimer
[Status 21:30:49 INFO] Starting Set [AERI set: name U380, 6 scans, 0 angle, D16300 command]
[Ingest 21:30:49 INFO] Sending XML status message
[Status 21:30:49 INFO] Mirror angle: 0
[Mirror 21:30:50 INFO] rotating to position U
[Status 21:30:50 INFO] .SET file for ACQ96 ready
[Ingest 21:30:51 INFO] Starting acquisition
[Status 21:30:51 INFO] reading housekeeping
[Status 21:31:09 INFO] acquire complete
[Status 21:31:10 INFO] writing housekeeping
[Sequencer 21:31:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:31:10 INFO] incremented U scene to 380 completed views
[Sequencer 21:31:10 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:31:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:31:10 INFO] incremented to [AERI set: name V380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:31:10 INFO] U380.SIG(18)
[sigmove 21:31:10 DEBUG] transformed U380Ma.SPC -> U380MA.SPC
[sigmove 21:31:10 DEBUG] transformed U380Mb.SPC -> U380MB.SPC
[sigmove 21:31:10 DEBUG] transformed U380Mc.SPC -> U380MC.SPC
[sigmove 21:31:10 DEBUG] transformed U380Md.SPC -> U380MD.SPC
[sigmove 21:31:10 DEBUG] transformed U380Me.SPC -> U380ME.SPC
[sigmove 21:31:10 DEBUG] transformed U380Mf.SPC -> U380MF.SPC
[Status 21:31:10 INFO] data for U380 transferred to science data processing
[Tidy 21:31:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:31:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:31:10 INFO] resetting WatchDogTimer
[Status 21:31:10 INFO] Starting Set [AERI set: name V380, 6 scans, 0 angle, D16300 command]
[Ingest 21:31:10 INFO] Sending XML status message
[Status 21:31:10 INFO] Mirror angle: 0
[Mirror 21:31:11 INFO] rotating to position V
[Status 21:31:11 INFO] .SET file for ACQ96 ready
[Ingest 21:31:12 INFO] Starting acquisition
[Status 21:31:12 INFO] reading housekeeping
[Status 21:31:30 INFO] acquire complete
[Status 21:31:31 INFO] writing housekeeping
[Sequencer 21:31:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:31:31 INFO] incremented V scene to 380 completed views
[Sequencer 21:31:31 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:31:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:31:31 INFO] incremented to [AERI set: name W380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:31:31 INFO] V380.SIG(18)
[sigmove 21:31:31 DEBUG] transformed V380Ma.SPC -> V380MA.SPC
[sigmove 21:31:31 DEBUG] transformed V380Mb.SPC -> V380MB.SPC
[sigmove 21:31:31 DEBUG] transformed V380Mc.SPC -> V380MC.SPC
[sigmove 21:31:31 DEBUG] transformed V380Md.SPC -> V380MD.SPC
[sigmove 21:31:31 DEBUG] transformed V380Me.SPC -> V380ME.SPC
[sigmove 21:31:31 DEBUG] transformed V380Mf.SPC -> V380MF.SPC
[Status 21:31:31 INFO] data for V380 transferred to science data processing
[Tidy 21:31:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:31:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:31:31 INFO] resetting WatchDogTimer
[Status 21:31:32 INFO] Starting Set [AERI set: name W380, 6 scans, 0 angle, D16300 command]
[Ingest 21:31:32 INFO] Sending XML status message
[Status 21:31:32 INFO] Mirror angle: 0
[Mirror 21:31:32 INFO] rotating to position W
[Status 21:31:33 INFO] .SET file for ACQ96 ready
[Ingest 21:31:33 INFO] Starting acquisition
[Status 21:31:34 INFO] reading housekeeping
[Status 21:31:51 INFO] acquire complete
[Status 21:31:53 INFO] writing housekeeping
[Sequencer 21:31:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:31:53 INFO] incremented W scene to 380 completed views
[Sequencer 21:31:53 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:31:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:31:53 INFO] incremented to [AERI set: name X380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:31:53 INFO] W380.SIG(18)
[sigmove 21:31:53 DEBUG] transformed W380Ma.SPC -> W380MA.SPC
[sigmove 21:31:53 DEBUG] transformed W380Mb.SPC -> W380MB.SPC
[sigmove 21:31:53 DEBUG] transformed W380Mc.SPC -> W380MC.SPC
[sigmove 21:31:53 DEBUG] transformed W380Md.SPC -> W380MD.SPC
[sigmove 21:31:53 DEBUG] transformed W380Me.SPC -> W380ME.SPC
[sigmove 21:31:53 DEBUG] transformed W380Mf.SPC -> W380MF.SPC
[Status 21:31:53 INFO] data for W380 transferred to science data processing
[Tidy 21:31:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:31:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:31:53 INFO] resetting WatchDogTimer
[Status 21:31:53 INFO] Starting Set [AERI set: name X380, 6 scans, 0 angle, D16300 command]
[Ingest 21:31:53 INFO] Sending XML status message
[Status 21:31:53 INFO] Mirror angle: 0
[Mirror 21:31:54 INFO] rotating to position X
[Status 21:31:54 INFO] .SET file for ACQ96 ready
[Ingest 21:31:55 INFO] Starting acquisition
[Status 21:31:55 INFO] reading housekeeping
[Status 21:32:13 INFO] acquire complete
[Status 21:32:14 INFO] writing housekeeping
[Sequencer 21:32:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:32:14 INFO] incremented X scene to 380 completed views
[Sequencer 21:32:14 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:32:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:32:14 INFO] incremented to [AERI set: name Y380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:32:14 INFO] X380.SIG(18)
[sigmove 21:32:14 DEBUG] transformed X380Ma.SPC -> X380MA.SPC
[sigmove 21:32:14 DEBUG] transformed X380Mb.SPC -> X380MB.SPC
[sigmove 21:32:14 DEBUG] transformed X380Mc.SPC -> X380MC.SPC
[sigmove 21:32:14 DEBUG] transformed X380Md.SPC -> X380MD.SPC
[sigmove 21:32:14 DEBUG] transformed X380Me.SPC -> X380ME.SPC
[sigmove 21:32:14 DEBUG] transformed X380Mf.SPC -> X380MF.SPC
[Status 21:32:14 INFO] data for X380 transferred to science data processing
[Tidy 21:32:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:32:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:32:14 INFO] resetting WatchDogTimer
[Status 21:32:14 INFO] Starting Set [AERI set: name Y380, 6 scans, 0 angle, D16300 command]
[Ingest 21:32:14 INFO] Sending XML status message
[Status 21:32:14 INFO] Mirror angle: 0
[Mirror 21:32:15 INFO] rotating to position Y
[Status 21:32:15 INFO] .SET file for ACQ96 ready
[Ingest 21:32:16 INFO] Starting acquisition
[Status 21:32:16 INFO] reading housekeeping
[Status 21:32:34 INFO] acquire complete
[Status 21:32:35 INFO] writing housekeeping
[Sequencer 21:32:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:32:35 INFO] incremented Y scene to 380 completed views
[Sequencer 21:32:35 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:32:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:32:35 INFO] incremented to [AERI set: name Z380, 6 scans, 0 angle, D16300 command] set
[sigmove 21:32:35 INFO] Y380.SIG(18)
[sigmove 21:32:35 DEBUG] transformed Y380Ma.SPC -> Y380MA.SPC
[sigmove 21:32:35 DEBUG] transformed Y380Mb.SPC -> Y380MB.SPC
[sigmove 21:32:35 DEBUG] transformed Y380Mc.SPC -> Y380MC.SPC
[sigmove 21:32:35 DEBUG] transformed Y380Md.SPC -> Y380MD.SPC
[sigmove 21:32:35 DEBUG] transformed Y380Me.SPC -> Y380ME.SPC
[sigmove 21:32:35 DEBUG] transformed Y380Mf.SPC -> Y380MF.SPC
[Status 21:32:35 INFO] data for Y380 transferred to science data processing
[Tidy 21:32:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:32:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:32:35 INFO] resetting WatchDogTimer
[Status 21:32:36 INFO] Starting Set [AERI set: name Z380, 6 scans, 0 angle, D16300 command]
[Ingest 21:32:36 INFO] Sending XML status message
[Status 21:32:36 INFO] Mirror angle: 0
[Mirror 21:32:36 INFO] rotating to position Z
[Status 21:32:37 INFO] .SET file for ACQ96 ready
[Ingest 21:32:37 INFO] Starting acquisition
[Status 21:32:38 INFO] reading housekeeping
[Status 21:32:55 INFO] acquire complete
[Status 21:32:56 INFO] writing housekeeping
[Sequencer 21:32:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:32:56 INFO] incremented Z scene to 380 completed views
[Sequencer 21:32:56 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:32:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:32:56 INFO] incremented to [AERI set: name H381, 6 scans, 60 angle, D22500 command] set
[sigmove 21:32:56 INFO] Z380.SIG(18)
[sigmove 21:32:56 DEBUG] transformed Z380Ma.SPC -> Z380MA.SPC
[sigmove 21:32:56 DEBUG] transformed Z380Mb.SPC -> Z380MB.SPC
[sigmove 21:32:56 DEBUG] transformed Z380Mc.SPC -> Z380MC.SPC
[sigmove 21:32:56 DEBUG] transformed Z380Md.SPC -> Z380MD.SPC
[sigmove 21:32:56 DEBUG] transformed Z380Me.SPC -> Z380ME.SPC
[sigmove 21:32:56 DEBUG] transformed Z380Mf.SPC -> Z380MF.SPC
[Status 21:32:56 INFO] data for Z380 transferred to science data processing
[Tidy 21:32:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:32:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:32:56 INFO] resetting WatchDogTimer
[Status 21:32:57 INFO] Starting Set [AERI set: name H381, 6 scans, 60 angle, D22500 command]
[Ingest 21:32:57 INFO] Sending XML status message
[Status 21:32:57 INFO] Mirror angle: 60
[Mirror 21:32:57 INFO] rotating to position H
[Status 21:32:58 INFO] .SET file for ACQ96 ready
[Ingest 21:32:59 INFO] Starting acquisition
[Status 21:32:59 INFO] reading housekeeping
[Status 21:33:17 INFO] acquire complete
[Status 21:33:18 INFO] writing housekeeping
[Sequencer 21:33:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:33:18 INFO] incremented H scene to 381 completed views
[Sequencer 21:33:18 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:33:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:33:18 INFO] incremented to [AERI set: name A381, 6 scans, 120 angle, D28300 command] set
[sigmove 21:33:18 INFO] H381.SIG(18)
[sigmove 21:33:18 DEBUG] transformed H381Ma.SPC -> H381MA.SPC
[sigmove 21:33:18 DEBUG] transformed H381Mb.SPC -> H381MB.SPC
[sigmove 21:33:18 DEBUG] transformed H381Mc.SPC -> H381MC.SPC
[sigmove 21:33:18 DEBUG] transformed H381Md.SPC -> H381MD.SPC
[sigmove 21:33:18 DEBUG] transformed H381Me.SPC -> H381ME.SPC
[sigmove 21:33:18 DEBUG] transformed H381Mf.SPC -> H381MF.SPC
[Status 21:33:18 INFO] data for H381 transferred to science data processing
[Tidy 21:33:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:33:18 INFO] A379.FIN(19),H379.FIN(19),S379.FIN(19),T379.FIN(19),U379.FIN(19),V379.FIN(19),W379.FIN(19),X379.FIN(19),Y379.FIN(19),Z379.FIN(19),A380.FIN(19),H380.FIN(19),S380.FIN(19),T380.FIN(19),U380.FIN(19),V380.FIN(19),W380.FIN(19),X380.FIN(19),Y380.FIN(19),Z380.FIN(19)
[sigmove 21:33:18 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:33:18 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:33:24 DEBUG] done zipping
[WatchDog 21:33:25 INFO] resetting WatchDogTimer
[Status 21:33:25 INFO] Starting Set [AERI set: name A381, 6 scans, 120 angle, D28300 command]
[Ingest 21:33:25 INFO] Sending XML status message
[Status 21:33:25 INFO] Mirror angle: 120
[Mirror 21:33:26 INFO] rotating to position A
[Status 21:33:27 INFO] .SET file for ACQ96 ready
[Ingest 21:33:27 INFO] Starting acquisition
[Status 21:33:28 INFO] reading housekeeping
[Status 21:33:46 INFO] acquire complete
[Status 21:33:47 INFO] writing housekeeping
[Sequencer 21:33:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:33:47 INFO] incremented A scene to 381 completed views
[Sequencer 21:33:47 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:33:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:33:47 INFO] incremented to [AERI set: name S381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:33:47 INFO] A381.SIG(18)
[sigmove 21:33:47 DEBUG] transformed A381Ma.SPC -> A381MA.SPC
[sigmove 21:33:47 DEBUG] transformed A381Mb.SPC -> A381MB.SPC
[sigmove 21:33:47 DEBUG] transformed A381Mc.SPC -> A381MC.SPC
[sigmove 21:33:47 DEBUG] transformed A381Md.SPC -> A381MD.SPC
[sigmove 21:33:47 DEBUG] transformed A381Me.SPC -> A381ME.SPC
[sigmove 21:33:47 DEBUG] transformed A381Mf.SPC -> A381MF.SPC
[Status 21:33:47 INFO] data for A381 transferred to science data processing
[Tidy 21:33:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:33:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:33:47 INFO] resetting WatchDogTimer
[Status 21:33:47 INFO] Starting Set [AERI set: name S381, 6 scans, 0 angle, D16300 command]
[Ingest 21:33:47 INFO] Sending XML status message
[Status 21:33:47 INFO] Mirror angle: 0
[Mirror 21:33:48 INFO] rotating to position S
[Status 21:33:49 INFO] .SET file for ACQ96 ready
[Ingest 21:33:50 INFO] Starting acquisition
[Status 21:33:50 INFO] reading housekeeping
[Status 21:34:08 INFO] acquire complete
[Status 21:34:09 INFO] writing housekeeping
[Sequencer 21:34:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:34:09 INFO] incremented S scene to 381 completed views
[Sequencer 21:34:09 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:34:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:34:09 INFO] incremented to [AERI set: name T381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:34:09 INFO] S381.SIG(18)
[sigmove 21:34:09 DEBUG] transformed S381Ma.SPC -> S381MA.SPC
[sigmove 21:34:09 DEBUG] transformed S381Mb.SPC -> S381MB.SPC
[sigmove 21:34:09 DEBUG] transformed S381Mc.SPC -> S381MC.SPC
[sigmove 21:34:09 DEBUG] transformed S381Md.SPC -> S381MD.SPC
[sigmove 21:34:09 DEBUG] transformed S381Me.SPC -> S381ME.SPC
[sigmove 21:34:09 DEBUG] transformed S381Mf.SPC -> S381MF.SPC
[Status 21:34:09 INFO] data for S381 transferred to science data processing
[Tidy 21:34:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:34:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:34:09 INFO] resetting WatchDogTimer
[Status 21:34:10 INFO] Starting Set [AERI set: name T381, 6 scans, 0 angle, D16300 command]
[Ingest 21:34:10 INFO] Sending XML status message
[Status 21:34:10 INFO] Mirror angle: 0
[Mirror 21:34:10 INFO] rotating to position T
[Status 21:34:11 INFO] .SET file for ACQ96 ready
[Ingest 21:34:11 INFO] Starting acquisition
[Status 21:34:12 INFO] reading housekeeping
[Status 21:34:29 INFO] acquire complete
[Status 21:34:31 INFO] writing housekeeping
[Sequencer 21:34:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:34:31 INFO] incremented T scene to 381 completed views
[Sequencer 21:34:31 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:34:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:34:31 INFO] incremented to [AERI set: name U381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:34:31 INFO] T381.SIG(18)
[sigmove 21:34:31 DEBUG] transformed T381Ma.SPC -> T381MA.SPC
[sigmove 21:34:31 DEBUG] transformed T381Mb.SPC -> T381MB.SPC
[sigmove 21:34:31 DEBUG] transformed T381Mc.SPC -> T381MC.SPC
[sigmove 21:34:31 DEBUG] transformed T381Md.SPC -> T381MD.SPC
[sigmove 21:34:31 DEBUG] transformed T381Me.SPC -> T381ME.SPC
[sigmove 21:34:31 DEBUG] transformed T381Mf.SPC -> T381MF.SPC
[Status 21:34:31 INFO] data for T381 transferred to science data processing
[Tidy 21:34:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:34:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:34:31 INFO] resetting WatchDogTimer
[Status 21:34:31 INFO] Starting Set [AERI set: name U381, 6 scans, 0 angle, D16300 command]
[Ingest 21:34:31 INFO] Sending XML status message
[Status 21:34:31 INFO] Mirror angle: 0
[Mirror 21:34:32 INFO] rotating to position U
[Status 21:34:33 INFO] .SET file for ACQ96 ready
[Ingest 21:34:33 INFO] Starting acquisition
[Status 21:34:34 INFO] reading housekeeping
[Status 21:34:52 INFO] acquire complete
[Status 21:34:53 INFO] writing housekeeping
[Sequencer 21:34:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:34:53 INFO] incremented U scene to 381 completed views
[Sequencer 21:34:53 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:34:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:34:53 INFO] incremented to [AERI set: name V381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:34:53 INFO] U381.SIG(18)
[sigmove 21:34:53 DEBUG] transformed U381Ma.SPC -> U381MA.SPC
[sigmove 21:34:53 DEBUG] transformed U381Mb.SPC -> U381MB.SPC
[sigmove 21:34:53 DEBUG] transformed U381Mc.SPC -> U381MC.SPC
[sigmove 21:34:53 DEBUG] transformed U381Md.SPC -> U381MD.SPC
[sigmove 21:34:53 DEBUG] transformed U381Me.SPC -> U381ME.SPC
[sigmove 21:34:53 DEBUG] transformed U381Mf.SPC -> U381MF.SPC
[Status 21:34:53 INFO] data for U381 transferred to science data processing
[Tidy 21:34:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:34:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:34:53 INFO] resetting WatchDogTimer
[Status 21:34:54 INFO] Starting Set [AERI set: name V381, 6 scans, 0 angle, D16300 command]
[Ingest 21:34:54 INFO] Sending XML status message
[Status 21:34:54 INFO] Mirror angle: 0
[Mirror 21:34:54 INFO] rotating to position V
[Status 21:34:55 INFO] .SET file for ACQ96 ready
[Ingest 21:34:55 INFO] Starting acquisition
[Status 21:34:56 INFO] reading housekeeping
[Status 21:35:13 INFO] acquire complete
[Status 21:35:14 INFO] writing housekeeping
[Sequencer 21:35:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:35:14 INFO] incremented V scene to 381 completed views
[Sequencer 21:35:14 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:35:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:35:14 INFO] incremented to [AERI set: name W381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:35:14 INFO] V381.SIG(18)
[sigmove 21:35:14 DEBUG] transformed V381Ma.SPC -> V381MA.SPC
[sigmove 21:35:14 DEBUG] transformed V381Mb.SPC -> V381MB.SPC
[sigmove 21:35:14 DEBUG] transformed V381Mc.SPC -> V381MC.SPC
[sigmove 21:35:14 DEBUG] transformed V381Md.SPC -> V381MD.SPC
[sigmove 21:35:14 DEBUG] transformed V381Me.SPC -> V381ME.SPC
[sigmove 21:35:14 DEBUG] transformed V381Mf.SPC -> V381MF.SPC
[Status 21:35:14 INFO] data for V381 transferred to science data processing
[Tidy 21:35:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:35:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:35:14 INFO] resetting WatchDogTimer
[Status 21:35:15 INFO] Starting Set [AERI set: name W381, 6 scans, 0 angle, D16300 command]
[Ingest 21:35:15 INFO] Sending XML status message
[Status 21:35:15 INFO] Mirror angle: 0
[Mirror 21:35:15 INFO] rotating to position W
[Status 21:35:16 INFO] .SET file for ACQ96 ready
[Ingest 21:35:16 INFO] Starting acquisition
[Status 21:35:17 INFO] reading housekeeping
[Status 21:35:34 INFO] acquire complete
[Status 21:35:36 INFO] writing housekeeping
[Sequencer 21:35:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:35:36 INFO] incremented W scene to 381 completed views
[Sequencer 21:35:36 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:35:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:35:36 INFO] incremented to [AERI set: name X381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:35:36 INFO] W381.SIG(18)
[sigmove 21:35:36 DEBUG] transformed W381Ma.SPC -> W381MA.SPC
[sigmove 21:35:36 DEBUG] transformed W381Mb.SPC -> W381MB.SPC
[sigmove 21:35:36 DEBUG] transformed W381Mc.SPC -> W381MC.SPC
[sigmove 21:35:36 DEBUG] transformed W381Md.SPC -> W381MD.SPC
[sigmove 21:35:36 DEBUG] transformed W381Me.SPC -> W381ME.SPC
[sigmove 21:35:36 DEBUG] transformed W381Mf.SPC -> W381MF.SPC
[Status 21:35:36 INFO] data for W381 transferred to science data processing
[Tidy 21:35:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:35:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:35:36 INFO] resetting WatchDogTimer
[Status 21:35:36 INFO] Starting Set [AERI set: name X381, 6 scans, 0 angle, D16300 command]
[Ingest 21:35:36 INFO] Sending XML status message
[Status 21:35:36 INFO] Mirror angle: 0
[Mirror 21:35:37 INFO] rotating to position X
[Status 21:35:37 INFO] .SET file for ACQ96 ready
[Ingest 21:35:38 INFO] Starting acquisition
[Status 21:35:38 INFO] reading housekeeping
[Status 21:35:56 INFO] acquire complete
[Status 21:35:57 INFO] writing housekeeping
[Sequencer 21:35:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:35:57 INFO] incremented X scene to 381 completed views
[Sequencer 21:35:57 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:35:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:35:57 INFO] incremented to [AERI set: name Y381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:35:57 INFO] X381.SIG(18)
[sigmove 21:35:57 DEBUG] transformed X381Ma.SPC -> X381MA.SPC
[sigmove 21:35:57 DEBUG] transformed X381Mb.SPC -> X381MB.SPC
[sigmove 21:35:57 DEBUG] transformed X381Mc.SPC -> X381MC.SPC
[sigmove 21:35:57 DEBUG] transformed X381Md.SPC -> X381MD.SPC
[sigmove 21:35:57 DEBUG] transformed X381Me.SPC -> X381ME.SPC
[sigmove 21:35:57 DEBUG] transformed X381Mf.SPC -> X381MF.SPC
[Status 21:35:57 INFO] data for X381 transferred to science data processing
[Tidy 21:35:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:35:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:35:57 INFO] resetting WatchDogTimer
[Status 21:35:57 INFO] Starting Set [AERI set: name Y381, 6 scans, 0 angle, D16300 command]
[Ingest 21:35:57 INFO] Sending XML status message
[Status 21:35:57 INFO] Mirror angle: 0
[Mirror 21:35:58 INFO] rotating to position Y
[Status 21:35:59 INFO] .SET file for ACQ96 ready
[Ingest 21:35:59 INFO] Starting acquisition
[Status 21:35:59 INFO] reading housekeeping
[Status 21:36:17 INFO] acquire complete
[Status 21:36:18 INFO] writing housekeeping
[Sequencer 21:36:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:36:18 INFO] incremented Y scene to 381 completed views
[Sequencer 21:36:18 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:36:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:36:18 INFO] incremented to [AERI set: name Z381, 6 scans, 0 angle, D16300 command] set
[sigmove 21:36:18 INFO] Y381.SIG(18)
[sigmove 21:36:18 DEBUG] transformed Y381Ma.SPC -> Y381MA.SPC
[sigmove 21:36:18 DEBUG] transformed Y381Mb.SPC -> Y381MB.SPC
[sigmove 21:36:18 DEBUG] transformed Y381Mc.SPC -> Y381MC.SPC
[sigmove 21:36:18 DEBUG] transformed Y381Md.SPC -> Y381MD.SPC
[sigmove 21:36:18 DEBUG] transformed Y381Me.SPC -> Y381ME.SPC
[sigmove 21:36:18 DEBUG] transformed Y381Mf.SPC -> Y381MF.SPC
[Status 21:36:18 INFO] data for Y381 transferred to science data processing
[Tidy 21:36:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:36:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:36:18 INFO] resetting WatchDogTimer
[Status 21:36:19 INFO] Starting Set [AERI set: name Z381, 6 scans, 0 angle, D16300 command]
[Ingest 21:36:19 INFO] Sending XML status message
[Status 21:36:19 INFO] Mirror angle: 0
[Mirror 21:36:19 INFO] rotating to position Z
[Status 21:36:20 INFO] .SET file for ACQ96 ready
[Ingest 21:36:20 INFO] Starting acquisition
[Status 21:36:21 INFO] reading housekeeping
[Status 21:36:38 INFO] acquire complete
[Status 21:36:40 INFO] writing housekeeping
[Sequencer 21:36:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:36:40 INFO] incremented Z scene to 381 completed views
[Sequencer 21:36:40 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:36:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:36:40 INFO] incremented to [AERI set: name A382, 6 scans, 120 angle, D28300 command] set
[sigmove 21:36:40 INFO] Z381.SIG(18)
[sigmove 21:36:40 DEBUG] transformed Z381Ma.SPC -> Z381MA.SPC
[sigmove 21:36:40 DEBUG] transformed Z381Mb.SPC -> Z381MB.SPC
[sigmove 21:36:40 DEBUG] transformed Z381Mc.SPC -> Z381MC.SPC
[sigmove 21:36:40 DEBUG] transformed Z381Md.SPC -> Z381MD.SPC
[sigmove 21:36:40 DEBUG] transformed Z381Me.SPC -> Z381ME.SPC
[sigmove 21:36:40 DEBUG] transformed Z381Mf.SPC -> Z381MF.SPC
[Status 21:36:40 INFO] data for Z381 transferred to science data processing
[Tidy 21:36:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:36:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:36:40 INFO] resetting WatchDogTimer
[Status 21:36:40 INFO] Starting Set [AERI set: name A382, 6 scans, 120 angle, D28300 command]
[Ingest 21:36:40 INFO] Sending XML status message
[Status 21:36:40 INFO] Mirror angle: 120
[Mirror 21:36:41 INFO] rotating to position A
[Status 21:36:42 INFO] .SET file for ACQ96 ready
[Ingest 21:36:43 INFO] Starting acquisition
[Status 21:36:43 INFO] reading housekeeping
[Status 21:37:01 INFO] acquire complete
[Status 21:37:02 INFO] writing housekeeping
[Sequencer 21:37:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:37:02 INFO] incremented A scene to 382 completed views
[Sequencer 21:37:02 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:37:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:37:02 INFO] incremented to [AERI set: name H382, 6 scans, 60 angle, D22500 command] set
[sigmove 21:37:02 INFO] A382.SIG(18)
[sigmove 21:37:02 DEBUG] transformed A382Ma.SPC -> A382MA.SPC
[sigmove 21:37:02 DEBUG] transformed A382Mb.SPC -> A382MB.SPC
[sigmove 21:37:02 DEBUG] transformed A382Mc.SPC -> A382MC.SPC
[sigmove 21:37:02 DEBUG] transformed A382Md.SPC -> A382MD.SPC
[sigmove 21:37:02 DEBUG] transformed A382Me.SPC -> A382ME.SPC
[sigmove 21:37:02 DEBUG] transformed A382Mf.SPC -> A382MF.SPC
[Status 21:37:02 INFO] data for A382 transferred to science data processing
[Tidy 21:37:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:37:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:37:02 INFO] resetting WatchDogTimer
[Status 21:37:03 INFO] Starting Set [AERI set: name H382, 6 scans, 60 angle, D22500 command]
[Ingest 21:37:03 INFO] Sending XML status message
[Status 21:37:03 INFO] Mirror angle: 60
[Mirror 21:37:03 INFO] rotating to position H
[Status 21:37:04 INFO] .SET file for ACQ96 ready
[Ingest 21:37:04 INFO] Starting acquisition
[Status 21:37:05 INFO] reading housekeeping
[Status 21:37:22 INFO] acquire complete
[Status 21:37:23 INFO] writing housekeeping
[Sequencer 21:37:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:37:23 INFO] incremented H scene to 382 completed views
[Sequencer 21:37:23 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:37:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:37:23 INFO] incremented to [AERI set: name S382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:37:23 INFO] H382.SIG(18)
[sigmove 21:37:23 DEBUG] transformed H382Ma.SPC -> H382MA.SPC
[sigmove 21:37:23 DEBUG] transformed H382Mb.SPC -> H382MB.SPC
[sigmove 21:37:23 DEBUG] transformed H382Mc.SPC -> H382MC.SPC
[sigmove 21:37:23 DEBUG] transformed H382Md.SPC -> H382MD.SPC
[sigmove 21:37:23 DEBUG] transformed H382Me.SPC -> H382ME.SPC
[sigmove 21:37:23 DEBUG] transformed H382Mf.SPC -> H382MF.SPC
[Status 21:37:23 INFO] data for H382 transferred to science data processing
[Tidy 21:37:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:37:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:37:23 INFO] resetting WatchDogTimer
[Status 21:37:24 INFO] Starting Set [AERI set: name S382, 6 scans, 0 angle, D16300 command]
[Ingest 21:37:24 INFO] Sending XML status message
[Status 21:37:24 INFO] Mirror angle: 0
[Mirror 21:37:24 INFO] rotating to position S
[Status 21:37:25 INFO] .SET file for ACQ96 ready
[Ingest 21:37:26 INFO] Starting acquisition
[Status 21:37:26 INFO] reading housekeeping
[Status 21:37:43 INFO] acquire complete
[Status 21:37:45 INFO] writing housekeeping
[Sequencer 21:37:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:37:45 INFO] incremented S scene to 382 completed views
[Sequencer 21:37:45 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:37:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:37:45 INFO] incremented to [AERI set: name T382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:37:45 INFO] S382.SIG(18)
[sigmove 21:37:45 DEBUG] transformed S382Ma.SPC -> S382MA.SPC
[sigmove 21:37:45 DEBUG] transformed S382Mb.SPC -> S382MB.SPC
[sigmove 21:37:45 DEBUG] transformed S382Mc.SPC -> S382MC.SPC
[sigmove 21:37:45 DEBUG] transformed S382Md.SPC -> S382MD.SPC
[sigmove 21:37:45 DEBUG] transformed S382Me.SPC -> S382ME.SPC
[sigmove 21:37:45 DEBUG] transformed S382Mf.SPC -> S382MF.SPC
[Status 21:37:45 INFO] data for S382 transferred to science data processing
[Tidy 21:37:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:37:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:37:45 INFO] resetting WatchDogTimer
[Status 21:37:45 INFO] Starting Set [AERI set: name T382, 6 scans, 0 angle, D16300 command]
[Ingest 21:37:45 INFO] Sending XML status message
[Status 21:37:45 INFO] Mirror angle: 0
[Mirror 21:37:46 INFO] rotating to position T
[Status 21:37:47 INFO] .SET file for ACQ96 ready
[Ingest 21:37:47 INFO] Starting acquisition
[Status 21:37:47 INFO] reading housekeeping
[Status 21:38:05 INFO] acquire complete
[Status 21:38:06 INFO] writing housekeeping
[Sequencer 21:38:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:38:06 INFO] incremented T scene to 382 completed views
[Sequencer 21:38:06 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:38:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:38:06 INFO] incremented to [AERI set: name U382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:38:06 INFO] T382.SIG(18)
[sigmove 21:38:06 DEBUG] transformed T382Ma.SPC -> T382MA.SPC
[sigmove 21:38:06 DEBUG] transformed T382Mb.SPC -> T382MB.SPC
[sigmove 21:38:06 DEBUG] transformed T382Mc.SPC -> T382MC.SPC
[sigmove 21:38:06 DEBUG] transformed T382Md.SPC -> T382MD.SPC
[sigmove 21:38:06 DEBUG] transformed T382Me.SPC -> T382ME.SPC
[sigmove 21:38:06 DEBUG] transformed T382Mf.SPC -> T382MF.SPC
[Status 21:38:06 INFO] data for T382 transferred to science data processing
[Tidy 21:38:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:38:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:38:06 INFO] resetting WatchDogTimer
[Status 21:38:06 INFO] Starting Set [AERI set: name U382, 6 scans, 0 angle, D16300 command]
[Ingest 21:38:06 INFO] Sending XML status message
[Status 21:38:06 INFO] Mirror angle: 0
[Mirror 21:38:07 INFO] rotating to position U
[Status 21:38:07 INFO] .SET file for ACQ96 ready
[Ingest 21:38:08 INFO] Starting acquisition
[Status 21:38:08 INFO] reading housekeeping
[Status 21:38:26 INFO] acquire complete
[Status 21:38:27 INFO] writing housekeeping
[Sequencer 21:38:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:38:27 INFO] incremented U scene to 382 completed views
[Sequencer 21:38:27 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:38:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:38:27 INFO] incremented to [AERI set: name V382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:38:27 INFO] U382.SIG(18)
[sigmove 21:38:27 DEBUG] transformed U382Ma.SPC -> U382MA.SPC
[sigmove 21:38:27 DEBUG] transformed U382Mb.SPC -> U382MB.SPC
[sigmove 21:38:27 DEBUG] transformed U382Mc.SPC -> U382MC.SPC
[sigmove 21:38:27 DEBUG] transformed U382Md.SPC -> U382MD.SPC
[sigmove 21:38:27 DEBUG] transformed U382Me.SPC -> U382ME.SPC
[sigmove 21:38:27 DEBUG] transformed U382Mf.SPC -> U382MF.SPC
[Status 21:38:27 INFO] data for U382 transferred to science data processing
[Tidy 21:38:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:38:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:38:27 INFO] resetting WatchDogTimer
[Status 21:38:28 INFO] Starting Set [AERI set: name V382, 6 scans, 0 angle, D16300 command]
[Ingest 21:38:28 INFO] Sending XML status message
[Status 21:38:28 INFO] Mirror angle: 0
[Mirror 21:38:28 INFO] rotating to position V
[Status 21:38:29 INFO] .SET file for ACQ96 ready
[Ingest 21:38:29 INFO] Starting acquisition
[Status 21:38:30 INFO] reading housekeeping
[Status 21:38:47 INFO] acquire complete
[Status 21:38:49 INFO] writing housekeeping
[Sequencer 21:38:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:38:49 INFO] incremented V scene to 382 completed views
[Sequencer 21:38:49 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:38:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:38:49 INFO] incremented to [AERI set: name W382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:38:49 INFO] V382.SIG(18)
[sigmove 21:38:49 DEBUG] transformed V382Ma.SPC -> V382MA.SPC
[sigmove 21:38:49 DEBUG] transformed V382Mb.SPC -> V382MB.SPC
[sigmove 21:38:49 DEBUG] transformed V382Mc.SPC -> V382MC.SPC
[sigmove 21:38:49 DEBUG] transformed V382Md.SPC -> V382MD.SPC
[sigmove 21:38:49 DEBUG] transformed V382Me.SPC -> V382ME.SPC
[sigmove 21:38:49 DEBUG] transformed V382Mf.SPC -> V382MF.SPC
[Status 21:38:49 INFO] data for V382 transferred to science data processing
[Tidy 21:38:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:38:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:38:49 INFO] resetting WatchDogTimer
[Status 21:38:49 INFO] Starting Set [AERI set: name W382, 6 scans, 0 angle, D16300 command]
[Ingest 21:38:49 INFO] Sending XML status message
[Status 21:38:49 INFO] Mirror angle: 0
[Mirror 21:38:50 INFO] rotating to position W
[Status 21:38:50 INFO] .SET file for ACQ96 ready
[Ingest 21:38:51 INFO] Starting acquisition
[Status 21:38:51 INFO] reading housekeeping
[Status 21:39:09 INFO] acquire complete
[Status 21:39:10 INFO] writing housekeeping
[Sequencer 21:39:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:39:10 INFO] incremented W scene to 382 completed views
[Sequencer 21:39:10 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:39:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:39:10 INFO] incremented to [AERI set: name X382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:39:10 INFO] W382.SIG(18)
[sigmove 21:39:10 DEBUG] transformed W382Ma.SPC -> W382MA.SPC
[sigmove 21:39:10 DEBUG] transformed W382Mb.SPC -> W382MB.SPC
[sigmove 21:39:10 DEBUG] transformed W382Mc.SPC -> W382MC.SPC
[sigmove 21:39:10 DEBUG] transformed W382Md.SPC -> W382MD.SPC
[sigmove 21:39:10 DEBUG] transformed W382Me.SPC -> W382ME.SPC
[sigmove 21:39:10 DEBUG] transformed W382Mf.SPC -> W382MF.SPC
[Status 21:39:10 INFO] data for W382 transferred to science data processing
[Tidy 21:39:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:39:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:39:10 INFO] resetting WatchDogTimer
[Status 21:39:10 INFO] Starting Set [AERI set: name X382, 6 scans, 0 angle, D16300 command]
[Ingest 21:39:10 INFO] Sending XML status message
[Status 21:39:10 INFO] Mirror angle: 0
[Mirror 21:39:11 INFO] rotating to position X
[Status 21:39:11 INFO] .SET file for ACQ96 ready
[Ingest 21:39:12 INFO] Starting acquisition
[Status 21:39:12 INFO] reading housekeeping
[Status 21:39:30 INFO] acquire complete
[Status 21:39:31 INFO] writing housekeeping
[Sequencer 21:39:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:39:31 INFO] incremented X scene to 382 completed views
[Sequencer 21:39:31 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:39:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:39:31 INFO] incremented to [AERI set: name Y382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:39:31 INFO] X382.SIG(18)
[sigmove 21:39:31 DEBUG] transformed X382Ma.SPC -> X382MA.SPC
[sigmove 21:39:31 DEBUG] transformed X382Mb.SPC -> X382MB.SPC
[sigmove 21:39:31 DEBUG] transformed X382Mc.SPC -> X382MC.SPC
[sigmove 21:39:31 DEBUG] transformed X382Md.SPC -> X382MD.SPC
[sigmove 21:39:31 DEBUG] transformed X382Me.SPC -> X382ME.SPC
[sigmove 21:39:31 DEBUG] transformed X382Mf.SPC -> X382MF.SPC
[Status 21:39:31 INFO] data for X382 transferred to science data processing
[Tidy 21:39:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:39:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:39:31 INFO] resetting WatchDogTimer
[Status 21:39:32 INFO] Starting Set [AERI set: name Y382, 6 scans, 0 angle, D16300 command]
[Ingest 21:39:32 INFO] Sending XML status message
[Status 21:39:32 INFO] Mirror angle: 0
[Mirror 21:39:32 INFO] rotating to position Y
[Status 21:39:33 INFO] .SET file for ACQ96 ready
[Ingest 21:39:33 INFO] Starting acquisition
[Status 21:39:34 INFO] reading housekeeping
[Status 21:39:51 INFO] acquire complete
[Status 21:39:52 INFO] writing housekeeping
[Sequencer 21:39:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:39:52 INFO] incremented Y scene to 382 completed views
[Sequencer 21:39:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:39:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:39:52 INFO] incremented to [AERI set: name Z382, 6 scans, 0 angle, D16300 command] set
[sigmove 21:39:53 INFO] Y382.SIG(18)
[sigmove 21:39:53 DEBUG] transformed Y382Ma.SPC -> Y382MA.SPC
[sigmove 21:39:53 DEBUG] transformed Y382Mb.SPC -> Y382MB.SPC
[sigmove 21:39:53 DEBUG] transformed Y382Mc.SPC -> Y382MC.SPC
[sigmove 21:39:53 DEBUG] transformed Y382Md.SPC -> Y382MD.SPC
[sigmove 21:39:53 DEBUG] transformed Y382Me.SPC -> Y382ME.SPC
[sigmove 21:39:53 DEBUG] transformed Y382Mf.SPC -> Y382MF.SPC
[Status 21:39:53 INFO] data for Y382 transferred to science data processing
[Tidy 21:39:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:39:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:39:53 INFO] resetting WatchDogTimer
[Status 21:39:53 INFO] Starting Set [AERI set: name Z382, 6 scans, 0 angle, D16300 command]
[Ingest 21:39:53 INFO] Sending XML status message
[Status 21:39:53 INFO] Mirror angle: 0
[Mirror 21:39:53 INFO] rotating to position Z
[Status 21:39:54 INFO] .SET file for ACQ96 ready
[Ingest 21:39:54 INFO] Starting acquisition
[Status 21:39:55 INFO] reading housekeeping
[Status 21:40:13 INFO] acquire complete
[Status 21:40:14 INFO] writing housekeeping
[Sequencer 21:40:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:40:14 INFO] incremented Z scene to 382 completed views
[Sequencer 21:40:14 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:40:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:40:14 INFO] incremented to [AERI set: name H383, 6 scans, 60 angle, D22500 command] set
[sigmove 21:40:14 INFO] Z382.SIG(18)
[sigmove 21:40:14 DEBUG] transformed Z382Ma.SPC -> Z382MA.SPC
[sigmove 21:40:14 DEBUG] transformed Z382Mb.SPC -> Z382MB.SPC
[sigmove 21:40:14 DEBUG] transformed Z382Mc.SPC -> Z382MC.SPC
[sigmove 21:40:14 DEBUG] transformed Z382Md.SPC -> Z382MD.SPC
[sigmove 21:40:14 DEBUG] transformed Z382Me.SPC -> Z382ME.SPC
[sigmove 21:40:14 DEBUG] transformed Z382Mf.SPC -> Z382MF.SPC
[Status 21:40:14 INFO] data for Z382 transferred to science data processing
[Tidy 21:40:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:40:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:40:14 INFO] resetting WatchDogTimer
[Status 21:40:14 INFO] Starting Set [AERI set: name H383, 6 scans, 60 angle, D22500 command]
[Ingest 21:40:14 INFO] Sending XML status message
[Status 21:40:14 INFO] Mirror angle: 60
[Mirror 21:40:15 INFO] rotating to position H
[Status 21:40:16 INFO] .SET file for ACQ96 ready
[Ingest 21:40:16 INFO] Starting acquisition
[Status 21:40:17 INFO] reading housekeeping
[Status 21:40:35 INFO] acquire complete
[Status 21:40:36 INFO] writing housekeeping
[Sequencer 21:40:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:40:36 INFO] incremented H scene to 383 completed views
[Sequencer 21:40:36 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:40:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:40:36 INFO] incremented to [AERI set: name A383, 6 scans, 120 angle, D28300 command] set
[sigmove 21:40:36 INFO] H383.SIG(18)
[sigmove 21:40:36 DEBUG] transformed H383Ma.SPC -> H383MA.SPC
[sigmove 21:40:36 DEBUG] transformed H383Mb.SPC -> H383MB.SPC
[sigmove 21:40:36 DEBUG] transformed H383Mc.SPC -> H383MC.SPC
[sigmove 21:40:36 DEBUG] transformed H383Md.SPC -> H383MD.SPC
[sigmove 21:40:36 DEBUG] transformed H383Me.SPC -> H383ME.SPC
[sigmove 21:40:36 DEBUG] transformed H383Mf.SPC -> H383MF.SPC
[Status 21:40:36 INFO] data for H383 transferred to science data processing
[Tidy 21:40:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:40:36 INFO] A381.FIN(19),H381.FIN(19),S381.FIN(19),T381.FIN(19),U381.FIN(19),V381.FIN(19),W381.FIN(19),X381.FIN(19),Y381.FIN(19),Z381.FIN(19),A382.FIN(19),H382.FIN(19),S382.FIN(19),T382.FIN(19),U382.FIN(19),V382.FIN(19),W382.FIN(19),X382.FIN(19),Y382.FIN(19),Z382.FIN(19)
[sigmove 21:40:36 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:40:36 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:40:43 DEBUG] done zipping
[WatchDog 21:40:43 INFO] resetting WatchDogTimer
[Status 21:40:44 INFO] Starting Set [AERI set: name A383, 6 scans, 120 angle, D28300 command]
[Ingest 21:40:44 INFO] Sending XML status message
[Status 21:40:44 INFO] Mirror angle: 120
[Mirror 21:40:44 INFO] rotating to position A
[Status 21:40:46 INFO] .SET file for ACQ96 ready
[Ingest 21:40:46 INFO] Starting acquisition
[Status 21:40:46 INFO] reading housekeeping
[Status 21:41:04 INFO] acquire complete
[Status 21:41:05 INFO] writing housekeeping
[Sequencer 21:41:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:41:05 INFO] incremented A scene to 383 completed views
[Sequencer 21:41:05 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:41:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:41:05 INFO] incremented to [AERI set: name S383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:41:05 INFO] A383.SIG(18)
[sigmove 21:41:05 DEBUG] transformed A383Ma.SPC -> A383MA.SPC
[sigmove 21:41:05 DEBUG] transformed A383Mb.SPC -> A383MB.SPC
[sigmove 21:41:05 DEBUG] transformed A383Mc.SPC -> A383MC.SPC
[sigmove 21:41:05 DEBUG] transformed A383Md.SPC -> A383MD.SPC
[sigmove 21:41:05 DEBUG] transformed A383Me.SPC -> A383ME.SPC
[sigmove 21:41:05 DEBUG] transformed A383Mf.SPC -> A383MF.SPC
[Status 21:41:05 INFO] data for A383 transferred to science data processing
[Tidy 21:41:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:41:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:41:05 INFO] resetting WatchDogTimer
[Status 21:41:06 INFO] Starting Set [AERI set: name S383, 6 scans, 0 angle, D16300 command]
[Ingest 21:41:06 INFO] Sending XML status message
[Status 21:41:06 INFO] Mirror angle: 0
[Mirror 21:41:06 INFO] rotating to position S
[Status 21:41:08 INFO] .SET file for ACQ96 ready
[Ingest 21:41:08 INFO] Starting acquisition
[Status 21:41:09 INFO] reading housekeeping
[Status 21:41:27 INFO] acquire complete
[Status 21:41:28 INFO] writing housekeeping
[Sequencer 21:41:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:41:28 INFO] incremented S scene to 383 completed views
[Sequencer 21:41:28 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:41:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:41:28 INFO] incremented to [AERI set: name T383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:41:28 INFO] S383.SIG(18)
[sigmove 21:41:28 DEBUG] transformed S383Ma.SPC -> S383MA.SPC
[sigmove 21:41:28 DEBUG] transformed S383Mb.SPC -> S383MB.SPC
[sigmove 21:41:28 DEBUG] transformed S383Mc.SPC -> S383MC.SPC
[sigmove 21:41:28 DEBUG] transformed S383Md.SPC -> S383MD.SPC
[sigmove 21:41:28 DEBUG] transformed S383Me.SPC -> S383ME.SPC
[sigmove 21:41:28 DEBUG] transformed S383Mf.SPC -> S383MF.SPC
[Status 21:41:28 INFO] data for S383 transferred to science data processing
[Tidy 21:41:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:41:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:41:28 INFO] resetting WatchDogTimer
[Status 21:41:28 INFO] Starting Set [AERI set: name T383, 6 scans, 0 angle, D16300 command]
[Ingest 21:41:28 INFO] Sending XML status message
[Status 21:41:28 INFO] Mirror angle: 0
[Mirror 21:41:29 INFO] rotating to position T
[Status 21:41:29 INFO] .SET file for ACQ96 ready
[Ingest 21:41:30 INFO] Starting acquisition
[Status 21:41:30 INFO] reading housekeeping
[Status 21:41:48 INFO] acquire complete
[Status 21:41:49 INFO] writing housekeeping
[Sequencer 21:41:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:41:49 INFO] incremented T scene to 383 completed views
[Sequencer 21:41:49 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:41:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:41:49 INFO] incremented to [AERI set: name U383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:41:49 INFO] T383.SIG(18)
[sigmove 21:41:49 DEBUG] transformed T383Ma.SPC -> T383MA.SPC
[sigmove 21:41:49 DEBUG] transformed T383Mb.SPC -> T383MB.SPC
[sigmove 21:41:49 DEBUG] transformed T383Mc.SPC -> T383MC.SPC
[sigmove 21:41:49 DEBUG] transformed T383Md.SPC -> T383MD.SPC
[sigmove 21:41:49 DEBUG] transformed T383Me.SPC -> T383ME.SPC
[sigmove 21:41:49 DEBUG] transformed T383Mf.SPC -> T383MF.SPC
[Status 21:41:49 INFO] data for T383 transferred to science data processing
[Tidy 21:41:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:41:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:41:49 INFO] resetting WatchDogTimer
[Status 21:41:50 INFO] Starting Set [AERI set: name U383, 6 scans, 0 angle, D16300 command]
[Ingest 21:41:50 INFO] Sending XML status message
[Status 21:41:50 INFO] Mirror angle: 0
[Mirror 21:41:50 INFO] rotating to position U
[Status 21:41:51 INFO] .SET file for ACQ96 ready
[Ingest 21:41:51 INFO] Starting acquisition
[Status 21:41:52 INFO] reading housekeeping
[Status 21:42:10 INFO] acquire complete
[Status 21:42:11 INFO] writing housekeeping
[Sequencer 21:42:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:42:11 INFO] incremented U scene to 383 completed views
[Sequencer 21:42:11 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:42:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:42:11 INFO] incremented to [AERI set: name V383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:42:11 INFO] U383.SIG(18)
[sigmove 21:42:11 DEBUG] transformed U383Ma.SPC -> U383MA.SPC
[sigmove 21:42:11 DEBUG] transformed U383Mb.SPC -> U383MB.SPC
[sigmove 21:42:11 DEBUG] transformed U383Mc.SPC -> U383MC.SPC
[sigmove 21:42:11 DEBUG] transformed U383Md.SPC -> U383MD.SPC
[sigmove 21:42:11 DEBUG] transformed U383Me.SPC -> U383ME.SPC
[sigmove 21:42:11 DEBUG] transformed U383Mf.SPC -> U383MF.SPC
[Status 21:42:11 INFO] data for U383 transferred to science data processing
[Tidy 21:42:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:42:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:42:11 INFO] resetting WatchDogTimer
[Status 21:42:11 INFO] Starting Set [AERI set: name V383, 6 scans, 0 angle, D16300 command]
[Ingest 21:42:11 INFO] Sending XML status message
[Status 21:42:11 INFO] Mirror angle: 0
[Mirror 21:42:12 INFO] rotating to position V
[Status 21:42:12 INFO] .SET file for ACQ96 ready
[Ingest 21:42:13 INFO] Starting acquisition
[Status 21:42:13 INFO] reading housekeeping
[Status 21:42:31 INFO] acquire complete
[Status 21:42:32 INFO] writing housekeeping
[Sequencer 21:42:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:42:32 INFO] incremented V scene to 383 completed views
[Sequencer 21:42:32 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:42:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:42:32 INFO] incremented to [AERI set: name W383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:42:32 INFO] V383.SIG(18)
[sigmove 21:42:32 DEBUG] transformed V383Ma.SPC -> V383MA.SPC
[sigmove 21:42:32 DEBUG] transformed V383Mb.SPC -> V383MB.SPC
[sigmove 21:42:32 DEBUG] transformed V383Mc.SPC -> V383MC.SPC
[sigmove 21:42:32 DEBUG] transformed V383Md.SPC -> V383MD.SPC
[sigmove 21:42:32 DEBUG] transformed V383Me.SPC -> V383ME.SPC
[sigmove 21:42:32 DEBUG] transformed V383Mf.SPC -> V383MF.SPC
[Status 21:42:32 INFO] data for V383 transferred to science data processing
[Tidy 21:42:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:42:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:42:32 INFO] resetting WatchDogTimer
[Status 21:42:32 INFO] Starting Set [AERI set: name W383, 6 scans, 0 angle, D16300 command]
[Ingest 21:42:32 INFO] Sending XML status message
[Status 21:42:32 INFO] Mirror angle: 0
[Mirror 21:42:33 INFO] rotating to position W
[Status 21:42:33 INFO] .SET file for ACQ96 ready
[Ingest 21:42:34 INFO] Starting acquisition
[Status 21:42:34 INFO] reading housekeeping
[Status 21:42:52 INFO] acquire complete
[Status 21:42:53 INFO] writing housekeeping
[Sequencer 21:42:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:42:53 INFO] incremented W scene to 383 completed views
[Sequencer 21:42:53 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:42:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:42:53 INFO] incremented to [AERI set: name X383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:42:53 INFO] W383.SIG(18)
[sigmove 21:42:53 DEBUG] transformed W383Ma.SPC -> W383MA.SPC
[sigmove 21:42:53 DEBUG] transformed W383Mb.SPC -> W383MB.SPC
[sigmove 21:42:53 DEBUG] transformed W383Mc.SPC -> W383MC.SPC
[sigmove 21:42:53 DEBUG] transformed W383Md.SPC -> W383MD.SPC
[sigmove 21:42:53 DEBUG] transformed W383Me.SPC -> W383ME.SPC
[sigmove 21:42:53 DEBUG] transformed W383Mf.SPC -> W383MF.SPC
[Status 21:42:53 INFO] data for W383 transferred to science data processing
[Tidy 21:42:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:42:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:42:53 INFO] resetting WatchDogTimer
[Status 21:42:54 INFO] Starting Set [AERI set: name X383, 6 scans, 0 angle, D16300 command]
[Ingest 21:42:54 INFO] Sending XML status message
[Status 21:42:54 INFO] Mirror angle: 0
[Mirror 21:42:54 INFO] rotating to position X
[Status 21:42:55 INFO] .SET file for ACQ96 ready
[Ingest 21:42:55 INFO] Starting acquisition
[Status 21:42:56 INFO] reading housekeeping
[Status 21:43:13 INFO] acquire complete
[Status 21:43:14 INFO] writing housekeeping
[Sequencer 21:43:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:43:14 INFO] incremented X scene to 383 completed views
[Sequencer 21:43:14 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:43:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:43:14 INFO] incremented to [AERI set: name Y383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:43:14 INFO] X383.SIG(18)
[sigmove 21:43:14 DEBUG] transformed X383Ma.SPC -> X383MA.SPC
[sigmove 21:43:14 DEBUG] transformed X383Mb.SPC -> X383MB.SPC
[sigmove 21:43:14 DEBUG] transformed X383Mc.SPC -> X383MC.SPC
[sigmove 21:43:14 DEBUG] transformed X383Md.SPC -> X383MD.SPC
[sigmove 21:43:14 DEBUG] transformed X383Me.SPC -> X383ME.SPC
[sigmove 21:43:14 DEBUG] transformed X383Mf.SPC -> X383MF.SPC
[Status 21:43:14 INFO] data for X383 transferred to science data processing
[Tidy 21:43:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:43:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:43:14 INFO] resetting WatchDogTimer
[Status 21:43:15 INFO] Starting Set [AERI set: name Y383, 6 scans, 0 angle, D16300 command]
[Ingest 21:43:15 INFO] Sending XML status message
[Status 21:43:15 INFO] Mirror angle: 0
[Mirror 21:43:15 INFO] rotating to position Y
[Status 21:43:16 INFO] .SET file for ACQ96 ready
[Ingest 21:43:16 INFO] Starting acquisition
[Status 21:43:17 INFO] reading housekeeping
[Status 21:43:34 INFO] acquire complete
[Status 21:43:36 INFO] writing housekeeping
[Sequencer 21:43:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:43:36 INFO] incremented Y scene to 383 completed views
[Sequencer 21:43:36 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:43:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:43:36 INFO] incremented to [AERI set: name Z383, 6 scans, 0 angle, D16300 command] set
[sigmove 21:43:36 INFO] Y383.SIG(18)
[sigmove 21:43:36 DEBUG] transformed Y383Ma.SPC -> Y383MA.SPC
[sigmove 21:43:36 DEBUG] transformed Y383Mb.SPC -> Y383MB.SPC
[sigmove 21:43:36 DEBUG] transformed Y383Mc.SPC -> Y383MC.SPC
[sigmove 21:43:36 DEBUG] transformed Y383Md.SPC -> Y383MD.SPC
[sigmove 21:43:36 DEBUG] transformed Y383Me.SPC -> Y383ME.SPC
[sigmove 21:43:36 DEBUG] transformed Y383Mf.SPC -> Y383MF.SPC
[Status 21:43:36 INFO] data for Y383 transferred to science data processing
[Tidy 21:43:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:43:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:43:36 INFO] resetting WatchDogTimer
[Status 21:43:36 INFO] Starting Set [AERI set: name Z383, 6 scans, 0 angle, D16300 command]
[Ingest 21:43:36 INFO] Sending XML status message
[Status 21:43:36 INFO] Mirror angle: 0
[Mirror 21:43:37 INFO] rotating to position Z
[Status 21:43:37 INFO] .SET file for ACQ96 ready
[Ingest 21:43:38 INFO] Starting acquisition
[Status 21:43:38 INFO] reading housekeeping
[Status 21:43:56 INFO] acquire complete
[Status 21:43:57 INFO] writing housekeeping
[Sequencer 21:43:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:43:57 INFO] incremented Z scene to 383 completed views
[Sequencer 21:43:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:43:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:43:57 INFO] incremented to [AERI set: name A384, 6 scans, 120 angle, D28300 command] set
[sigmove 21:43:57 INFO] Z383.SIG(18)
[sigmove 21:43:57 DEBUG] transformed Z383Ma.SPC -> Z383MA.SPC
[sigmove 21:43:57 DEBUG] transformed Z383Mb.SPC -> Z383MB.SPC
[sigmove 21:43:57 DEBUG] transformed Z383Mc.SPC -> Z383MC.SPC
[sigmove 21:43:57 DEBUG] transformed Z383Md.SPC -> Z383MD.SPC
[sigmove 21:43:57 DEBUG] transformed Z383Me.SPC -> Z383ME.SPC
[sigmove 21:43:57 DEBUG] transformed Z383Mf.SPC -> Z383MF.SPC
[Status 21:43:57 INFO] data for Z383 transferred to science data processing
[Tidy 21:43:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:43:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:43:57 INFO] resetting WatchDogTimer
[Status 21:43:57 INFO] Starting Set [AERI set: name A384, 6 scans, 120 angle, D28300 command]
[Ingest 21:43:57 INFO] Sending XML status message
[Status 21:43:57 INFO] Mirror angle: 120
[Mirror 21:43:58 INFO] rotating to position A
[Status 21:44:00 INFO] .SET file for ACQ96 ready
[Ingest 21:44:00 INFO] Starting acquisition
[Status 21:44:01 INFO] reading housekeeping
[Status 21:44:18 INFO] acquire complete
[Status 21:44:19 INFO] writing housekeeping
[Sequencer 21:44:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:44:19 INFO] incremented A scene to 384 completed views
[Sequencer 21:44:19 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:44:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:44:19 INFO] incremented to [AERI set: name H384, 6 scans, 60 angle, D22500 command] set
[sigmove 21:44:19 INFO] A384.SIG(18)
[sigmove 21:44:19 DEBUG] transformed A384Ma.SPC -> A384MA.SPC
[sigmove 21:44:19 DEBUG] transformed A384Mb.SPC -> A384MB.SPC
[sigmove 21:44:19 DEBUG] transformed A384Mc.SPC -> A384MC.SPC
[sigmove 21:44:19 DEBUG] transformed A384Md.SPC -> A384MD.SPC
[sigmove 21:44:19 DEBUG] transformed A384Me.SPC -> A384ME.SPC
[sigmove 21:44:19 DEBUG] transformed A384Mf.SPC -> A384MF.SPC
[Status 21:44:19 INFO] data for A384 transferred to science data processing
[Tidy 21:44:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:44:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:44:19 INFO] resetting WatchDogTimer
[Status 21:44:20 INFO] Starting Set [AERI set: name H384, 6 scans, 60 angle, D22500 command]
[Ingest 21:44:20 INFO] Sending XML status message
[Status 21:44:20 INFO] Mirror angle: 60
[Mirror 21:44:20 INFO] rotating to position H
[Status 21:44:22 INFO] .SET file for ACQ96 ready
[Ingest 21:44:22 INFO] Starting acquisition
[Status 21:44:23 INFO] reading housekeeping
[Status 21:44:40 INFO] acquire complete
[Status 21:44:41 INFO] writing housekeeping
[Sequencer 21:44:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:44:41 INFO] incremented H scene to 384 completed views
[Sequencer 21:44:41 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:44:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:44:41 INFO] incremented to [AERI set: name S384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:44:41 INFO] H384.SIG(18)
[sigmove 21:44:41 DEBUG] transformed H384Ma.SPC -> H384MA.SPC
[sigmove 21:44:41 DEBUG] transformed H384Mb.SPC -> H384MB.SPC
[sigmove 21:44:41 DEBUG] transformed H384Mc.SPC -> H384MC.SPC
[sigmove 21:44:41 DEBUG] transformed H384Md.SPC -> H384MD.SPC
[sigmove 21:44:41 DEBUG] transformed H384Me.SPC -> H384ME.SPC
[sigmove 21:44:41 DEBUG] transformed H384Mf.SPC -> H384MF.SPC
[Status 21:44:41 INFO] data for H384 transferred to science data processing
[Tidy 21:44:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:44:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:44:41 INFO] resetting WatchDogTimer
[Status 21:44:41 INFO] Starting Set [AERI set: name S384, 6 scans, 0 angle, D16300 command]
[Ingest 21:44:41 INFO] Sending XML status message
[Status 21:44:41 INFO] Mirror angle: 0
[Mirror 21:44:42 INFO] rotating to position S
[Status 21:44:43 INFO] .SET file for ACQ96 ready
[Ingest 21:44:43 INFO] Starting acquisition
[Status 21:44:44 INFO] reading housekeeping
[Status 21:45:01 INFO] acquire complete
[Status 21:45:02 INFO] writing housekeeping
[Sequencer 21:45:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:45:02 INFO] incremented S scene to 384 completed views
[Sequencer 21:45:02 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:45:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:45:02 INFO] incremented to [AERI set: name T384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:45:02 INFO] S384.SIG(18)
[sigmove 21:45:02 DEBUG] transformed S384Ma.SPC -> S384MA.SPC
[sigmove 21:45:02 DEBUG] transformed S384Mb.SPC -> S384MB.SPC
[sigmove 21:45:02 DEBUG] transformed S384Mc.SPC -> S384MC.SPC
[sigmove 21:45:02 DEBUG] transformed S384Md.SPC -> S384MD.SPC
[sigmove 21:45:02 DEBUG] transformed S384Me.SPC -> S384ME.SPC
[sigmove 21:45:02 DEBUG] transformed S384Mf.SPC -> S384MF.SPC
[Status 21:45:02 INFO] data for S384 transferred to science data processing
[Tidy 21:45:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:45:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:45:02 INFO] resetting WatchDogTimer
[Status 21:45:03 INFO] Starting Set [AERI set: name T384, 6 scans, 0 angle, D16300 command]
[Ingest 21:45:03 INFO] Sending XML status message
[Status 21:45:03 INFO] Mirror angle: 0
[Mirror 21:45:03 INFO] rotating to position T
[Status 21:45:04 INFO] .SET file for ACQ96 ready
[Ingest 21:45:04 INFO] Starting acquisition
[Status 21:45:05 INFO] reading housekeeping
[Status 21:45:22 INFO] acquire complete
[Status 21:45:23 INFO] writing housekeeping
[Sequencer 21:45:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:45:23 INFO] incremented T scene to 384 completed views
[Sequencer 21:45:23 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:45:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:45:23 INFO] incremented to [AERI set: name U384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:45:23 INFO] T384.SIG(18)
[sigmove 21:45:23 DEBUG] transformed T384Ma.SPC -> T384MA.SPC
[sigmove 21:45:23 DEBUG] transformed T384Mb.SPC -> T384MB.SPC
[sigmove 21:45:23 DEBUG] transformed T384Mc.SPC -> T384MC.SPC
[sigmove 21:45:23 DEBUG] transformed T384Md.SPC -> T384MD.SPC
[sigmove 21:45:23 DEBUG] transformed T384Me.SPC -> T384ME.SPC
[sigmove 21:45:23 DEBUG] transformed T384Mf.SPC -> T384MF.SPC
[Status 21:45:23 INFO] data for T384 transferred to science data processing
[Tidy 21:45:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:45:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:45:23 INFO] resetting WatchDogTimer
[Status 21:45:24 INFO] Starting Set [AERI set: name U384, 6 scans, 0 angle, D16300 command]
[Ingest 21:45:24 INFO] Sending XML status message
[Status 21:45:24 INFO] Mirror angle: 0
[Mirror 21:45:24 INFO] rotating to position U
[Status 21:45:25 INFO] .SET file for ACQ96 ready
[Ingest 21:45:26 INFO] Starting acquisition
[Status 21:45:27 INFO] reading housekeeping
[Status 21:45:43 INFO] acquire complete
[Status 21:45:45 INFO] writing housekeeping
[Sequencer 21:45:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:45:45 INFO] incremented U scene to 384 completed views
[Sequencer 21:45:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:45:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:45:45 INFO] incremented to [AERI set: name V384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:45:45 INFO] U384.SIG(18)
[sigmove 21:45:45 DEBUG] transformed U384Ma.SPC -> U384MA.SPC
[sigmove 21:45:45 DEBUG] transformed U384Mb.SPC -> U384MB.SPC
[sigmove 21:45:45 DEBUG] transformed U384Mc.SPC -> U384MC.SPC
[sigmove 21:45:45 DEBUG] transformed U384Md.SPC -> U384MD.SPC
[sigmove 21:45:45 DEBUG] transformed U384Me.SPC -> U384ME.SPC
[sigmove 21:45:45 DEBUG] transformed U384Mf.SPC -> U384MF.SPC
[Status 21:45:45 INFO] data for U384 transferred to science data processing
[Tidy 21:45:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:45:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:45:45 INFO] resetting WatchDogTimer
[Status 21:45:45 INFO] Starting Set [AERI set: name V384, 6 scans, 0 angle, D16300 command]
[Ingest 21:45:45 INFO] Sending XML status message
[Status 21:45:45 INFO] Mirror angle: 0
[Mirror 21:45:46 INFO] rotating to position V
[Status 21:45:46 INFO] .SET file for ACQ96 ready
[Ingest 21:45:47 INFO] Starting acquisition
[Status 21:45:47 INFO] reading housekeeping
[Status 21:46:05 INFO] acquire complete
[Status 21:46:06 INFO] writing housekeeping
[Sequencer 21:46:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:46:06 INFO] incremented V scene to 384 completed views
[Sequencer 21:46:06 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:46:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:46:06 INFO] incremented to [AERI set: name W384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:46:06 INFO] V384.SIG(18)
[sigmove 21:46:06 DEBUG] transformed V384Ma.SPC -> V384MA.SPC
[sigmove 21:46:06 DEBUG] transformed V384Mb.SPC -> V384MB.SPC
[sigmove 21:46:06 DEBUG] transformed V384Mc.SPC -> V384MC.SPC
[sigmove 21:46:06 DEBUG] transformed V384Md.SPC -> V384MD.SPC
[sigmove 21:46:06 DEBUG] transformed V384Me.SPC -> V384ME.SPC
[sigmove 21:46:06 DEBUG] transformed V384Mf.SPC -> V384MF.SPC
[Status 21:46:06 INFO] data for V384 transferred to science data processing
[Tidy 21:46:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:46:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:46:06 INFO] resetting WatchDogTimer
[Status 21:46:06 INFO] Starting Set [AERI set: name W384, 6 scans, 0 angle, D16300 command]
[Ingest 21:46:06 INFO] Sending XML status message
[Status 21:46:06 INFO] Mirror angle: 0
[Mirror 21:46:07 INFO] rotating to position W
[Status 21:46:08 INFO] .SET file for ACQ96 ready
[Ingest 21:46:08 INFO] Starting acquisition
[Status 21:46:09 INFO] reading housekeeping
[Status 21:46:26 INFO] acquire complete
[Status 21:46:27 INFO] writing housekeeping
[Sequencer 21:46:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:46:27 INFO] incremented W scene to 384 completed views
[Sequencer 21:46:27 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:46:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:46:27 INFO] incremented to [AERI set: name X384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:46:27 INFO] W384.SIG(18)
[sigmove 21:46:27 DEBUG] transformed W384Ma.SPC -> W384MA.SPC
[sigmove 21:46:27 DEBUG] transformed W384Mb.SPC -> W384MB.SPC
[sigmove 21:46:27 DEBUG] transformed W384Mc.SPC -> W384MC.SPC
[sigmove 21:46:27 DEBUG] transformed W384Md.SPC -> W384MD.SPC
[sigmove 21:46:27 DEBUG] transformed W384Me.SPC -> W384ME.SPC
[sigmove 21:46:27 DEBUG] transformed W384Mf.SPC -> W384MF.SPC
[Status 21:46:27 INFO] data for W384 transferred to science data processing
[Tidy 21:46:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:46:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:46:27 INFO] resetting WatchDogTimer
[Status 21:46:28 INFO] Starting Set [AERI set: name X384, 6 scans, 0 angle, D16300 command]
[Ingest 21:46:28 INFO] Sending XML status message
[Status 21:46:28 INFO] Mirror angle: 0
[Mirror 21:46:28 INFO] rotating to position X
[Status 21:46:29 INFO] .SET file for ACQ96 ready
[Ingest 21:46:29 INFO] Starting acquisition
[Status 21:46:30 INFO] reading housekeeping
[Status 21:46:47 INFO] acquire complete
[Status 21:46:49 INFO] writing housekeeping
[Sequencer 21:46:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:46:49 INFO] incremented X scene to 384 completed views
[Sequencer 21:46:49 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:46:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:46:49 INFO] incremented to [AERI set: name Y384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:46:49 INFO] X384.SIG(18)
[sigmove 21:46:49 DEBUG] transformed X384Ma.SPC -> X384MA.SPC
[sigmove 21:46:49 DEBUG] transformed X384Mb.SPC -> X384MB.SPC
[sigmove 21:46:49 DEBUG] transformed X384Mc.SPC -> X384MC.SPC
[sigmove 21:46:49 DEBUG] transformed X384Md.SPC -> X384MD.SPC
[sigmove 21:46:49 DEBUG] transformed X384Me.SPC -> X384ME.SPC
[sigmove 21:46:49 DEBUG] transformed X384Mf.SPC -> X384MF.SPC
[Status 21:46:49 INFO] data for X384 transferred to science data processing
[Tidy 21:46:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:46:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:46:49 INFO] resetting WatchDogTimer
[Status 21:46:49 INFO] Starting Set [AERI set: name Y384, 6 scans, 0 angle, D16300 command]
[Ingest 21:46:49 INFO] Sending XML status message
[Status 21:46:49 INFO] Mirror angle: 0
[Mirror 21:46:50 INFO] rotating to position Y
[Status 21:46:50 INFO] .SET file for ACQ96 ready
[Ingest 21:46:51 INFO] Starting acquisition
[Status 21:46:51 INFO] reading housekeeping
[Status 21:47:09 INFO] acquire complete
[Status 21:47:10 INFO] writing housekeeping
[Sequencer 21:47:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:47:10 INFO] incremented Y scene to 384 completed views
[Sequencer 21:47:10 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:47:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:47:10 INFO] incremented to [AERI set: name Z384, 6 scans, 0 angle, D16300 command] set
[sigmove 21:47:10 INFO] Y384.SIG(18)
[sigmove 21:47:10 DEBUG] transformed Y384Ma.SPC -> Y384MA.SPC
[sigmove 21:47:10 DEBUG] transformed Y384Mb.SPC -> Y384MB.SPC
[sigmove 21:47:10 DEBUG] transformed Y384Mc.SPC -> Y384MC.SPC
[sigmove 21:47:10 DEBUG] transformed Y384Md.SPC -> Y384MD.SPC
[sigmove 21:47:10 DEBUG] transformed Y384Me.SPC -> Y384ME.SPC
[sigmove 21:47:10 DEBUG] transformed Y384Mf.SPC -> Y384MF.SPC
[Status 21:47:10 INFO] data for Y384 transferred to science data processing
[Tidy 21:47:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:47:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:47:10 INFO] resetting WatchDogTimer
[Status 21:47:10 INFO] Starting Set [AERI set: name Z384, 6 scans, 0 angle, D16300 command]
[Ingest 21:47:10 INFO] Sending XML status message
[Status 21:47:10 INFO] Mirror angle: 0
[Mirror 21:47:11 INFO] rotating to position Z
[Status 21:47:12 INFO] .SET file for ACQ96 ready
[Ingest 21:47:12 INFO] Starting acquisition
[Status 21:47:12 INFO] reading housekeeping
[Status 21:47:30 INFO] acquire complete
[Status 21:47:31 INFO] writing housekeeping
[Sequencer 21:47:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:47:31 INFO] incremented Z scene to 384 completed views
[Sequencer 21:47:31 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:47:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:47:31 INFO] incremented to [AERI set: name H385, 6 scans, 60 angle, D22500 command] set
[sigmove 21:47:31 INFO] Z384.SIG(18)
[sigmove 21:47:31 DEBUG] transformed Z384Ma.SPC -> Z384MA.SPC
[sigmove 21:47:31 DEBUG] transformed Z384Mb.SPC -> Z384MB.SPC
[sigmove 21:47:31 DEBUG] transformed Z384Mc.SPC -> Z384MC.SPC
[sigmove 21:47:31 DEBUG] transformed Z384Md.SPC -> Z384MD.SPC
[sigmove 21:47:31 DEBUG] transformed Z384Me.SPC -> Z384ME.SPC
[sigmove 21:47:31 DEBUG] transformed Z384Mf.SPC -> Z384MF.SPC
[Status 21:47:31 INFO] data for Z384 transferred to science data processing
[Tidy 21:47:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:47:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:47:31 INFO] resetting WatchDogTimer
[Status 21:47:32 INFO] Starting Set [AERI set: name H385, 6 scans, 60 angle, D22500 command]
[Ingest 21:47:32 INFO] Sending XML status message
[Status 21:47:32 INFO] Mirror angle: 60
[Mirror 21:47:32 INFO] rotating to position H
[Status 21:47:33 INFO] .SET file for ACQ96 ready
[Ingest 21:47:34 INFO] Starting acquisition
[Status 21:47:34 INFO] reading housekeeping
[Status 21:47:51 INFO] acquire complete
[Status 21:47:53 INFO] writing housekeeping
[Sequencer 21:47:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:47:53 INFO] incremented H scene to 385 completed views
[Sequencer 21:47:53 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:47:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:47:53 INFO] incremented to [AERI set: name A385, 6 scans, 120 angle, D28300 command] set
[sigmove 21:47:53 INFO] H385.SIG(18)
[sigmove 21:47:53 DEBUG] transformed H385Ma.SPC -> H385MA.SPC
[sigmove 21:47:53 DEBUG] transformed H385Mb.SPC -> H385MB.SPC
[sigmove 21:47:53 DEBUG] transformed H385Mc.SPC -> H385MC.SPC
[sigmove 21:47:53 DEBUG] transformed H385Md.SPC -> H385MD.SPC
[sigmove 21:47:53 DEBUG] transformed H385Me.SPC -> H385ME.SPC
[sigmove 21:47:53 DEBUG] transformed H385Mf.SPC -> H385MF.SPC
[Status 21:47:53 INFO] data for H385 transferred to science data processing
[Tidy 21:47:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:47:53 INFO] A383.FIN(19),H383.FIN(19),S383.FIN(19),T383.FIN(19),U383.FIN(19),V383.FIN(19),W383.FIN(19),X383.FIN(19),Y383.FIN(19),Z383.FIN(19),A384.FIN(19),H384.FIN(19),S384.FIN(19),T384.FIN(19),U384.FIN(19),V384.FIN(19),W384.FIN(19),X384.FIN(19),Y384.FIN(19),Z384.FIN(19)
[sigmove 21:47:53 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:47:53 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:47:59 DEBUG] done zipping
[WatchDog 21:48:00 INFO] resetting WatchDogTimer
[Status 21:48:00 INFO] Starting Set [AERI set: name A385, 6 scans, 120 angle, D28300 command]
[Ingest 21:48:00 INFO] Sending XML status message
[Status 21:48:00 INFO] Mirror angle: 120
[Mirror 21:48:01 INFO] rotating to position A
[Status 21:48:02 INFO] .SET file for ACQ96 ready
[Ingest 21:48:02 INFO] Starting acquisition
[Status 21:48:03 INFO] reading housekeeping
[Status 21:48:20 INFO] acquire complete
[Status 21:48:22 INFO] writing housekeeping
[Sequencer 21:48:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:48:22 INFO] incremented A scene to 385 completed views
[Sequencer 21:48:22 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:48:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:48:22 INFO] incremented to [AERI set: name S385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:48:22 INFO] A385.SIG(18)
[sigmove 21:48:22 DEBUG] transformed A385Ma.SPC -> A385MA.SPC
[sigmove 21:48:22 DEBUG] transformed A385Mb.SPC -> A385MB.SPC
[sigmove 21:48:22 DEBUG] transformed A385Mc.SPC -> A385MC.SPC
[sigmove 21:48:22 DEBUG] transformed A385Md.SPC -> A385MD.SPC
[sigmove 21:48:22 DEBUG] transformed A385Me.SPC -> A385ME.SPC
[sigmove 21:48:22 DEBUG] transformed A385Mf.SPC -> A385MF.SPC
[Status 21:48:22 INFO] data for A385 transferred to science data processing
[Tidy 21:48:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:48:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:48:22 INFO] resetting WatchDogTimer
[Status 21:48:22 INFO] Starting Set [AERI set: name S385, 6 scans, 0 angle, D16300 command]
[Ingest 21:48:22 INFO] Sending XML status message
[Status 21:48:22 INFO] Mirror angle: 0
[Mirror 21:48:23 INFO] rotating to position S
[Status 21:48:24 INFO] .SET file for ACQ96 ready
[Ingest 21:48:25 INFO] Starting acquisition
[Status 21:48:25 INFO] reading housekeeping
[Status 21:48:43 INFO] acquire complete
[Status 21:48:44 INFO] writing housekeeping
[Sequencer 21:48:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:48:44 INFO] incremented S scene to 385 completed views
[Sequencer 21:48:44 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:48:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:48:44 INFO] incremented to [AERI set: name T385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:48:44 INFO] S385.SIG(18)
[sigmove 21:48:44 DEBUG] transformed S385Ma.SPC -> S385MA.SPC
[sigmove 21:48:44 DEBUG] transformed S385Mb.SPC -> S385MB.SPC
[sigmove 21:48:44 DEBUG] transformed S385Mc.SPC -> S385MC.SPC
[sigmove 21:48:44 DEBUG] transformed S385Md.SPC -> S385MD.SPC
[sigmove 21:48:44 DEBUG] transformed S385Me.SPC -> S385ME.SPC
[sigmove 21:48:44 DEBUG] transformed S385Mf.SPC -> S385MF.SPC
[Status 21:48:44 INFO] data for S385 transferred to science data processing
[Tidy 21:48:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:48:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:48:44 INFO] resetting WatchDogTimer
[Status 21:48:45 INFO] Starting Set [AERI set: name T385, 6 scans, 0 angle, D16300 command]
[Ingest 21:48:45 INFO] Sending XML status message
[Status 21:48:45 INFO] Mirror angle: 0
[Mirror 21:48:45 INFO] rotating to position T
[Status 21:48:46 INFO] .SET file for ACQ96 ready
[Ingest 21:48:46 INFO] Starting acquisition
[Status 21:48:47 INFO] reading housekeeping
[Status 21:49:04 INFO] acquire complete
[Status 21:49:05 INFO] writing housekeeping
[Sequencer 21:49:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:49:05 INFO] incremented T scene to 385 completed views
[Sequencer 21:49:05 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:49:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:49:05 INFO] incremented to [AERI set: name U385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:49:05 INFO] T385.SIG(18)
[sigmove 21:49:05 DEBUG] transformed T385Ma.SPC -> T385MA.SPC
[sigmove 21:49:05 DEBUG] transformed T385Mb.SPC -> T385MB.SPC
[sigmove 21:49:05 DEBUG] transformed T385Mc.SPC -> T385MC.SPC
[sigmove 21:49:05 DEBUG] transformed T385Md.SPC -> T385MD.SPC
[sigmove 21:49:05 DEBUG] transformed T385Me.SPC -> T385ME.SPC
[sigmove 21:49:05 DEBUG] transformed T385Mf.SPC -> T385MF.SPC
[Status 21:49:05 INFO] data for T385 transferred to science data processing
[Tidy 21:49:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:49:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:49:05 INFO] resetting WatchDogTimer
[Status 21:49:06 INFO] Starting Set [AERI set: name U385, 6 scans, 0 angle, D16300 command]
[Ingest 21:49:06 INFO] Sending XML status message
[Status 21:49:06 INFO] Mirror angle: 0
[Mirror 21:49:06 INFO] rotating to position U
[Status 21:49:07 INFO] .SET file for ACQ96 ready
[Ingest 21:49:07 INFO] Starting acquisition
[Status 21:49:08 INFO] reading housekeeping
[Status 21:49:26 INFO] acquire complete
[Status 21:49:27 INFO] writing housekeeping
[Sequencer 21:49:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:49:27 INFO] incremented U scene to 385 completed views
[Sequencer 21:49:27 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:49:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:49:27 INFO] incremented to [AERI set: name V385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:49:27 INFO] U385.SIG(18)
[sigmove 21:49:27 DEBUG] transformed U385Ma.SPC -> U385MA.SPC
[sigmove 21:49:27 DEBUG] transformed U385Mb.SPC -> U385MB.SPC
[sigmove 21:49:27 DEBUG] transformed U385Mc.SPC -> U385MC.SPC
[sigmove 21:49:27 DEBUG] transformed U385Md.SPC -> U385MD.SPC
[sigmove 21:49:27 DEBUG] transformed U385Me.SPC -> U385ME.SPC
[sigmove 21:49:27 DEBUG] transformed U385Mf.SPC -> U385MF.SPC
[Status 21:49:27 INFO] data for U385 transferred to science data processing
[Tidy 21:49:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:49:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:49:27 INFO] resetting WatchDogTimer
[Status 21:49:27 INFO] Starting Set [AERI set: name V385, 6 scans, 0 angle, D16300 command]
[Ingest 21:49:27 INFO] Sending XML status message
[Status 21:49:27 INFO] Mirror angle: 0
[Mirror 21:49:28 INFO] rotating to position V
[Status 21:49:28 INFO] .SET file for ACQ96 ready
[Ingest 21:49:29 INFO] Starting acquisition
[Status 21:49:29 INFO] reading housekeeping
[Status 21:49:47 INFO] acquire complete
[Status 21:49:48 INFO] writing housekeeping
[Sequencer 21:49:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:49:48 INFO] incremented V scene to 385 completed views
[Sequencer 21:49:48 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:49:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:49:48 INFO] incremented to [AERI set: name W385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:49:48 INFO] V385.SIG(18)
[sigmove 21:49:48 DEBUG] transformed V385Ma.SPC -> V385MA.SPC
[sigmove 21:49:48 DEBUG] transformed V385Mb.SPC -> V385MB.SPC
[sigmove 21:49:48 DEBUG] transformed V385Mc.SPC -> V385MC.SPC
[sigmove 21:49:48 DEBUG] transformed V385Md.SPC -> V385MD.SPC
[sigmove 21:49:48 DEBUG] transformed V385Me.SPC -> V385ME.SPC
[sigmove 21:49:48 DEBUG] transformed V385Mf.SPC -> V385MF.SPC
[Status 21:49:48 INFO] data for V385 transferred to science data processing
[Tidy 21:49:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:49:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:49:48 INFO] resetting WatchDogTimer
[Status 21:49:49 INFO] Starting Set [AERI set: name W385, 6 scans, 0 angle, D16300 command]
[Ingest 21:49:49 INFO] Sending XML status message
[Status 21:49:49 INFO] Mirror angle: 0
[Mirror 21:49:49 INFO] rotating to position W
[Status 21:49:50 INFO] .SET file for ACQ96 ready
[Ingest 21:49:50 INFO] Starting acquisition
[Status 21:49:51 INFO] reading housekeeping
[Status 21:50:08 INFO] acquire complete
[Status 21:50:09 INFO] writing housekeeping
[Sequencer 21:50:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:50:09 INFO] incremented W scene to 385 completed views
[Sequencer 21:50:09 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:50:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:50:09 INFO] incremented to [AERI set: name X385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:50:09 INFO] W385.SIG(18)
[sigmove 21:50:09 DEBUG] transformed W385Ma.SPC -> W385MA.SPC
[sigmove 21:50:09 DEBUG] transformed W385Mb.SPC -> W385MB.SPC
[sigmove 21:50:09 DEBUG] transformed W385Mc.SPC -> W385MC.SPC
[sigmove 21:50:09 DEBUG] transformed W385Md.SPC -> W385MD.SPC
[sigmove 21:50:09 DEBUG] transformed W385Me.SPC -> W385ME.SPC
[sigmove 21:50:09 DEBUG] transformed W385Mf.SPC -> W385MF.SPC
[Status 21:50:09 INFO] data for W385 transferred to science data processing
[Tidy 21:50:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:50:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:50:09 INFO] resetting WatchDogTimer
[Status 21:50:10 INFO] Starting Set [AERI set: name X385, 6 scans, 0 angle, D16300 command]
[Ingest 21:50:10 INFO] Sending XML status message
[Status 21:50:10 INFO] Mirror angle: 0
[Mirror 21:50:10 INFO] rotating to position X
[Status 21:50:11 INFO] .SET file for ACQ96 ready
[Ingest 21:50:11 INFO] Starting acquisition
[Status 21:50:12 INFO] reading housekeeping
[Status 21:50:29 INFO] acquire complete
[Status 21:50:31 INFO] writing housekeeping
[Sequencer 21:50:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:50:31 INFO] incremented X scene to 385 completed views
[Sequencer 21:50:31 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:50:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:50:31 INFO] incremented to [AERI set: name Y385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:50:31 INFO] X385.SIG(18)
[sigmove 21:50:31 DEBUG] transformed X385Ma.SPC -> X385MA.SPC
[sigmove 21:50:31 DEBUG] transformed X385Mb.SPC -> X385MB.SPC
[sigmove 21:50:31 DEBUG] transformed X385Mc.SPC -> X385MC.SPC
[sigmove 21:50:31 DEBUG] transformed X385Md.SPC -> X385MD.SPC
[sigmove 21:50:31 DEBUG] transformed X385Me.SPC -> X385ME.SPC
[sigmove 21:50:31 DEBUG] transformed X385Mf.SPC -> X385MF.SPC
[Status 21:50:31 INFO] data for X385 transferred to science data processing
[Tidy 21:50:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:50:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:50:31 INFO] resetting WatchDogTimer
[Status 21:50:31 INFO] Starting Set [AERI set: name Y385, 6 scans, 0 angle, D16300 command]
[Ingest 21:50:31 INFO] Sending XML status message
[Status 21:50:31 INFO] Mirror angle: 0
[Mirror 21:50:32 INFO] rotating to position Y
[Status 21:50:32 INFO] .SET file for ACQ96 ready
[Ingest 21:50:33 INFO] Starting acquisition
[Status 21:50:33 INFO] reading housekeeping
[Status 21:50:51 INFO] acquire complete
[Status 21:50:52 INFO] writing housekeeping
[Sequencer 21:50:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:50:52 INFO] incremented Y scene to 385 completed views
[Sequencer 21:50:52 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:50:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:50:52 INFO] incremented to [AERI set: name Z385, 6 scans, 0 angle, D16300 command] set
[sigmove 21:50:52 INFO] Y385.SIG(18)
[sigmove 21:50:52 DEBUG] transformed Y385Ma.SPC -> Y385MA.SPC
[sigmove 21:50:52 DEBUG] transformed Y385Mb.SPC -> Y385MB.SPC
[sigmove 21:50:52 DEBUG] transformed Y385Mc.SPC -> Y385MC.SPC
[sigmove 21:50:52 DEBUG] transformed Y385Md.SPC -> Y385MD.SPC
[sigmove 21:50:52 DEBUG] transformed Y385Me.SPC -> Y385ME.SPC
[sigmove 21:50:52 DEBUG] transformed Y385Mf.SPC -> Y385MF.SPC
[Status 21:50:52 INFO] data for Y385 transferred to science data processing
[Tidy 21:50:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:50:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:50:52 INFO] resetting WatchDogTimer
[Status 21:50:52 INFO] Starting Set [AERI set: name Z385, 6 scans, 0 angle, D16300 command]
[Ingest 21:50:52 INFO] Sending XML status message
[Status 21:50:52 INFO] Mirror angle: 0
[Mirror 21:50:53 INFO] rotating to position Z
[Status 21:50:54 INFO] .SET file for ACQ96 ready
[Ingest 21:50:54 INFO] Starting acquisition
[Status 21:50:55 INFO] reading housekeeping
[Status 21:51:12 INFO] acquire complete
[Status 21:51:13 INFO] writing housekeeping
[Sequencer 21:51:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:51:13 INFO] incremented Z scene to 385 completed views
[Sequencer 21:51:13 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:51:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:51:13 INFO] incremented to [AERI set: name A386, 6 scans, 120 angle, D28300 command] set
[sigmove 21:51:13 INFO] Z385.SIG(18)
[sigmove 21:51:13 DEBUG] transformed Z385Ma.SPC -> Z385MA.SPC
[sigmove 21:51:13 DEBUG] transformed Z385Mb.SPC -> Z385MB.SPC
[sigmove 21:51:13 DEBUG] transformed Z385Mc.SPC -> Z385MC.SPC
[sigmove 21:51:13 DEBUG] transformed Z385Md.SPC -> Z385MD.SPC
[sigmove 21:51:13 DEBUG] transformed Z385Me.SPC -> Z385ME.SPC
[sigmove 21:51:13 DEBUG] transformed Z385Mf.SPC -> Z385MF.SPC
[Status 21:51:13 INFO] data for Z385 transferred to science data processing
[Tidy 21:51:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:51:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:51:13 INFO] resetting WatchDogTimer
[Status 21:51:14 INFO] Starting Set [AERI set: name A386, 6 scans, 120 angle, D28300 command]
[Ingest 21:51:14 INFO] Sending XML status message
[Status 21:51:14 INFO] Mirror angle: 120
[Mirror 21:51:14 INFO] rotating to position A
[Status 21:51:16 INFO] .SET file for ACQ96 ready
[Ingest 21:51:16 INFO] Starting acquisition
[Status 21:51:17 INFO] reading housekeeping
[Status 21:51:34 INFO] acquire complete
[Status 21:51:36 INFO] writing housekeeping
[Sequencer 21:51:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:51:36 INFO] incremented A scene to 386 completed views
[Sequencer 21:51:36 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:51:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:51:36 INFO] incremented to [AERI set: name H386, 6 scans, 60 angle, D22500 command] set
[sigmove 21:51:36 INFO] A386.SIG(18)
[sigmove 21:51:36 DEBUG] transformed A386Ma.SPC -> A386MA.SPC
[sigmove 21:51:36 DEBUG] transformed A386Mb.SPC -> A386MB.SPC
[sigmove 21:51:36 DEBUG] transformed A386Mc.SPC -> A386MC.SPC
[sigmove 21:51:36 DEBUG] transformed A386Md.SPC -> A386MD.SPC
[sigmove 21:51:36 DEBUG] transformed A386Me.SPC -> A386ME.SPC
[sigmove 21:51:36 DEBUG] transformed A386Mf.SPC -> A386MF.SPC
[Status 21:51:36 INFO] data for A386 transferred to science data processing
[Tidy 21:51:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:51:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:51:36 INFO] resetting WatchDogTimer
[Status 21:51:36 INFO] Starting Set [AERI set: name H386, 6 scans, 60 angle, D22500 command]
[Ingest 21:51:36 INFO] Sending XML status message
[Status 21:51:36 INFO] Mirror angle: 60
[Mirror 21:51:37 INFO] rotating to position H
[Status 21:51:38 INFO] .SET file for ACQ96 ready
[Ingest 21:51:38 INFO] Starting acquisition
[Status 21:51:39 INFO] reading housekeeping
[Status 21:51:57 INFO] acquire complete
[Status 21:51:58 INFO] writing housekeeping
[Sequencer 21:51:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:51:58 INFO] incremented H scene to 386 completed views
[Sequencer 21:51:58 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:51:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:51:58 INFO] incremented to [AERI set: name S386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:51:58 INFO] H386.SIG(18)
[sigmove 21:51:58 DEBUG] transformed H386Ma.SPC -> H386MA.SPC
[sigmove 21:51:58 DEBUG] transformed H386Mb.SPC -> H386MB.SPC
[sigmove 21:51:58 DEBUG] transformed H386Mc.SPC -> H386MC.SPC
[sigmove 21:51:58 DEBUG] transformed H386Md.SPC -> H386MD.SPC
[sigmove 21:51:58 DEBUG] transformed H386Me.SPC -> H386ME.SPC
[sigmove 21:51:58 DEBUG] transformed H386Mf.SPC -> H386MF.SPC
[Status 21:51:58 INFO] data for H386 transferred to science data processing
[Tidy 21:51:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:51:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:51:58 INFO] resetting WatchDogTimer
[Status 21:51:59 INFO] Starting Set [AERI set: name S386, 6 scans, 0 angle, D16300 command]
[Ingest 21:51:59 INFO] Sending XML status message
[Status 21:51:59 INFO] Mirror angle: 0
[Mirror 21:51:59 INFO] rotating to position S
[Status 21:52:00 INFO] .SET file for ACQ96 ready
[Ingest 21:52:01 INFO] Starting acquisition
[Status 21:52:01 INFO] reading housekeeping
[Status 21:52:19 INFO] acquire complete
[Status 21:52:21 INFO] writing housekeeping
[Sequencer 21:52:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:52:21 INFO] incremented S scene to 386 completed views
[Sequencer 21:52:21 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:52:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:52:21 INFO] incremented to [AERI set: name T386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:52:21 INFO] S386.SIG(18)
[sigmove 21:52:21 DEBUG] transformed S386Ma.SPC -> S386MA.SPC
[sigmove 21:52:21 DEBUG] transformed S386Mb.SPC -> S386MB.SPC
[sigmove 21:52:21 DEBUG] transformed S386Mc.SPC -> S386MC.SPC
[sigmove 21:52:21 DEBUG] transformed S386Md.SPC -> S386MD.SPC
[sigmove 21:52:21 DEBUG] transformed S386Me.SPC -> S386ME.SPC
[sigmove 21:52:21 DEBUG] transformed S386Mf.SPC -> S386MF.SPC
[Status 21:52:21 INFO] data for S386 transferred to science data processing
[Tidy 21:52:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:52:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:52:21 INFO] resetting WatchDogTimer
[Status 21:52:21 INFO] Starting Set [AERI set: name T386, 6 scans, 0 angle, D16300 command]
[Ingest 21:52:21 INFO] Sending XML status message
[Status 21:52:21 INFO] Mirror angle: 0
[Mirror 21:52:22 INFO] rotating to position T
[Status 21:52:22 INFO] .SET file for ACQ96 ready
[Ingest 21:52:23 INFO] Starting acquisition
[Status 21:52:23 INFO] reading housekeeping
[Status 21:52:41 INFO] acquire complete
[Status 21:52:42 INFO] writing housekeeping
[Sequencer 21:52:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:52:42 INFO] incremented T scene to 386 completed views
[Sequencer 21:52:42 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:52:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:52:42 INFO] incremented to [AERI set: name U386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:52:42 INFO] T386.SIG(18)
[sigmove 21:52:42 DEBUG] transformed T386Ma.SPC -> T386MA.SPC
[sigmove 21:52:42 DEBUG] transformed T386Mb.SPC -> T386MB.SPC
[sigmove 21:52:42 DEBUG] transformed T386Mc.SPC -> T386MC.SPC
[sigmove 21:52:42 DEBUG] transformed T386Md.SPC -> T386MD.SPC
[sigmove 21:52:42 DEBUG] transformed T386Me.SPC -> T386ME.SPC
[sigmove 21:52:42 DEBUG] transformed T386Mf.SPC -> T386MF.SPC
[Status 21:52:42 INFO] data for T386 transferred to science data processing
[Tidy 21:52:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:52:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:52:42 INFO] resetting WatchDogTimer
[Status 21:52:42 INFO] Starting Set [AERI set: name U386, 6 scans, 0 angle, D16300 command]
[Ingest 21:52:42 INFO] Sending XML status message
[Status 21:52:42 INFO] Mirror angle: 0
[Mirror 21:52:43 INFO] rotating to position U
[Status 21:52:43 INFO] .SET file for ACQ96 ready
[Ingest 21:52:44 INFO] Starting acquisition
[Status 21:52:44 INFO] reading housekeeping
[Status 21:53:02 INFO] acquire complete
[Status 21:53:03 INFO] writing housekeeping
[Sequencer 21:53:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:53:03 INFO] incremented U scene to 386 completed views
[Sequencer 21:53:03 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:53:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:53:03 INFO] incremented to [AERI set: name V386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:53:03 INFO] U386.SIG(18)
[sigmove 21:53:03 DEBUG] transformed U386Ma.SPC -> U386MA.SPC
[sigmove 21:53:03 DEBUG] transformed U386Mb.SPC -> U386MB.SPC
[sigmove 21:53:03 DEBUG] transformed U386Mc.SPC -> U386MC.SPC
[sigmove 21:53:03 DEBUG] transformed U386Md.SPC -> U386MD.SPC
[sigmove 21:53:03 DEBUG] transformed U386Me.SPC -> U386ME.SPC
[sigmove 21:53:03 DEBUG] transformed U386Mf.SPC -> U386MF.SPC
[Status 21:53:03 INFO] data for U386 transferred to science data processing
[Tidy 21:53:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:53:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:53:03 INFO] resetting WatchDogTimer
[Status 21:53:04 INFO] Starting Set [AERI set: name V386, 6 scans, 0 angle, D16300 command]
[Ingest 21:53:04 INFO] Sending XML status message
[Status 21:53:04 INFO] Mirror angle: 0
[Mirror 21:53:04 INFO] rotating to position V
[Status 21:53:05 INFO] .SET file for ACQ96 ready
[Ingest 21:53:05 INFO] Starting acquisition
[Status 21:53:06 INFO] reading housekeeping
[Status 21:53:23 INFO] acquire complete
[Status 21:53:25 INFO] writing housekeeping
[Sequencer 21:53:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:53:25 INFO] incremented V scene to 386 completed views
[Sequencer 21:53:25 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:53:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:53:25 INFO] incremented to [AERI set: name W386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:53:25 INFO] V386.SIG(18)
[sigmove 21:53:25 DEBUG] transformed V386Ma.SPC -> V386MA.SPC
[sigmove 21:53:25 DEBUG] transformed V386Mb.SPC -> V386MB.SPC
[sigmove 21:53:25 DEBUG] transformed V386Mc.SPC -> V386MC.SPC
[sigmove 21:53:25 DEBUG] transformed V386Md.SPC -> V386MD.SPC
[sigmove 21:53:25 DEBUG] transformed V386Me.SPC -> V386ME.SPC
[sigmove 21:53:25 DEBUG] transformed V386Mf.SPC -> V386MF.SPC
[Status 21:53:25 INFO] data for V386 transferred to science data processing
[Tidy 21:53:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:53:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:53:25 INFO] resetting WatchDogTimer
[Status 21:53:25 INFO] Starting Set [AERI set: name W386, 6 scans, 0 angle, D16300 command]
[Ingest 21:53:25 INFO] Sending XML status message
[Status 21:53:25 INFO] Mirror angle: 0
[Mirror 21:53:26 INFO] rotating to position W
[Status 21:53:26 INFO] .SET file for ACQ96 ready
[Ingest 21:53:26 INFO] Starting acquisition
[Status 21:53:27 INFO] reading housekeeping
[Status 21:53:45 INFO] acquire complete
[Status 21:53:46 INFO] writing housekeeping
[Sequencer 21:53:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:53:46 INFO] incremented W scene to 386 completed views
[Sequencer 21:53:46 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:53:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:53:46 INFO] incremented to [AERI set: name X386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:53:46 INFO] W386.SIG(18)
[sigmove 21:53:46 DEBUG] transformed W386Ma.SPC -> W386MA.SPC
[sigmove 21:53:46 DEBUG] transformed W386Mb.SPC -> W386MB.SPC
[sigmove 21:53:46 DEBUG] transformed W386Mc.SPC -> W386MC.SPC
[sigmove 21:53:46 DEBUG] transformed W386Md.SPC -> W386MD.SPC
[sigmove 21:53:46 DEBUG] transformed W386Me.SPC -> W386ME.SPC
[sigmove 21:53:46 DEBUG] transformed W386Mf.SPC -> W386MF.SPC
[Status 21:53:46 INFO] data for W386 transferred to science data processing
[Tidy 21:53:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:53:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:53:46 INFO] resetting WatchDogTimer
[Status 21:53:46 INFO] Starting Set [AERI set: name X386, 6 scans, 0 angle, D16300 command]
[Ingest 21:53:46 INFO] Sending XML status message
[Status 21:53:46 INFO] Mirror angle: 0
[Mirror 21:53:47 INFO] rotating to position X
[Status 21:53:47 INFO] .SET file for ACQ96 ready
[Ingest 21:53:48 INFO] Starting acquisition
[Status 21:53:48 INFO] reading housekeeping
[Status 21:54:06 INFO] acquire complete
[Status 21:54:07 INFO] writing housekeeping
[Sequencer 21:54:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:54:07 INFO] incremented X scene to 386 completed views
[Sequencer 21:54:07 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:54:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:54:07 INFO] incremented to [AERI set: name Y386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:54:07 INFO] X386.SIG(18)
[sigmove 21:54:07 DEBUG] transformed X386Ma.SPC -> X386MA.SPC
[sigmove 21:54:07 DEBUG] transformed X386Mb.SPC -> X386MB.SPC
[sigmove 21:54:07 DEBUG] transformed X386Mc.SPC -> X386MC.SPC
[sigmove 21:54:07 DEBUG] transformed X386Md.SPC -> X386MD.SPC
[sigmove 21:54:07 DEBUG] transformed X386Me.SPC -> X386ME.SPC
[sigmove 21:54:07 DEBUG] transformed X386Mf.SPC -> X386MF.SPC
[Status 21:54:07 INFO] data for X386 transferred to science data processing
[Tidy 21:54:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:54:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:54:07 INFO] resetting WatchDogTimer
[Status 21:54:08 INFO] Starting Set [AERI set: name Y386, 6 scans, 0 angle, D16300 command]
[Ingest 21:54:08 INFO] Sending XML status message
[Status 21:54:08 INFO] Mirror angle: 0
[Mirror 21:54:08 INFO] rotating to position Y
[Status 21:54:09 INFO] .SET file for ACQ96 ready
[Ingest 21:54:09 INFO] Starting acquisition
[Status 21:54:10 INFO] reading housekeeping
[Status 21:54:27 INFO] acquire complete
[Status 21:54:28 INFO] writing housekeeping
[Sequencer 21:54:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:54:28 INFO] incremented Y scene to 386 completed views
[Sequencer 21:54:28 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:54:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:54:28 INFO] incremented to [AERI set: name Z386, 6 scans, 0 angle, D16300 command] set
[sigmove 21:54:28 INFO] Y386.SIG(18)
[sigmove 21:54:28 DEBUG] transformed Y386Ma.SPC -> Y386MA.SPC
[sigmove 21:54:28 DEBUG] transformed Y386Mb.SPC -> Y386MB.SPC
[sigmove 21:54:28 DEBUG] transformed Y386Mc.SPC -> Y386MC.SPC
[sigmove 21:54:28 DEBUG] transformed Y386Md.SPC -> Y386MD.SPC
[sigmove 21:54:28 DEBUG] transformed Y386Me.SPC -> Y386ME.SPC
[sigmove 21:54:28 DEBUG] transformed Y386Mf.SPC -> Y386MF.SPC
[Status 21:54:28 INFO] data for Y386 transferred to science data processing
[Tidy 21:54:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:54:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:54:28 INFO] resetting WatchDogTimer
[Status 21:54:29 INFO] Starting Set [AERI set: name Z386, 6 scans, 0 angle, D16300 command]
[Ingest 21:54:29 INFO] Sending XML status message
[Status 21:54:29 INFO] Mirror angle: 0
[Mirror 21:54:29 INFO] rotating to position Z
[Status 21:54:30 INFO] .SET file for ACQ96 ready
[Ingest 21:54:30 INFO] Starting acquisition
[Status 21:54:31 INFO] reading housekeeping
[Status 21:54:49 INFO] acquire complete
[Status 21:54:50 INFO] writing housekeeping
[Sequencer 21:54:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:54:50 INFO] incremented Z scene to 386 completed views
[Sequencer 21:54:50 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:54:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:54:50 INFO] incremented to [AERI set: name H387, 6 scans, 60 angle, D22500 command] set
[sigmove 21:54:50 INFO] Z386.SIG(18)
[sigmove 21:54:50 DEBUG] transformed Z386Ma.SPC -> Z386MA.SPC
[sigmove 21:54:50 DEBUG] transformed Z386Mb.SPC -> Z386MB.SPC
[sigmove 21:54:50 DEBUG] transformed Z386Mc.SPC -> Z386MC.SPC
[sigmove 21:54:50 DEBUG] transformed Z386Md.SPC -> Z386MD.SPC
[sigmove 21:54:50 DEBUG] transformed Z386Me.SPC -> Z386ME.SPC
[sigmove 21:54:50 DEBUG] transformed Z386Mf.SPC -> Z386MF.SPC
[Status 21:54:50 INFO] data for Z386 transferred to science data processing
[Tidy 21:54:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:54:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:54:50 INFO] resetting WatchDogTimer
[Status 21:54:50 INFO] Starting Set [AERI set: name H387, 6 scans, 60 angle, D22500 command]
[Ingest 21:54:50 INFO] Sending XML status message
[Status 21:54:50 INFO] Mirror angle: 60
[Mirror 21:54:51 INFO] rotating to position H
[Status 21:54:52 INFO] .SET file for ACQ96 ready
[Ingest 21:54:52 INFO] Starting acquisition
[Status 21:54:53 INFO] reading housekeeping
[Status 21:55:10 INFO] acquire complete
[Status 21:55:11 INFO] writing housekeeping
[Sequencer 21:55:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:55:11 INFO] incremented H scene to 387 completed views
[Sequencer 21:55:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:55:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:55:11 INFO] incremented to [AERI set: name A387, 6 scans, 120 angle, D28300 command] set
[sigmove 21:55:11 INFO] H387.SIG(18)
[sigmove 21:55:11 DEBUG] transformed H387Ma.SPC -> H387MA.SPC
[sigmove 21:55:11 DEBUG] transformed H387Mb.SPC -> H387MB.SPC
[sigmove 21:55:11 DEBUG] transformed H387Mc.SPC -> H387MC.SPC
[sigmove 21:55:11 DEBUG] transformed H387Md.SPC -> H387MD.SPC
[sigmove 21:55:11 DEBUG] transformed H387Me.SPC -> H387ME.SPC
[sigmove 21:55:11 DEBUG] transformed H387Mf.SPC -> H387MF.SPC
[Status 21:55:11 INFO] data for H387 transferred to science data processing
[Tidy 21:55:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:55:11 INFO] A385.FIN(19),H385.FIN(19),S385.FIN(19),T385.FIN(19),U385.FIN(19),V385.FIN(19),W385.FIN(19),X385.FIN(19),Y385.FIN(19),Z385.FIN(19),A386.FIN(19),H386.FIN(19),S386.FIN(19),T386.FIN(19),U386.FIN(19),V386.FIN(19),W386.FIN(19),X386.FIN(19),Y386.FIN(19),Z386.FIN(19)
[sigmove 21:55:11 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:55:11 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 21:55:18 DEBUG] done zipping
[WatchDog 21:55:18 INFO] resetting WatchDogTimer
[Status 21:55:19 INFO] Starting Set [AERI set: name A387, 6 scans, 120 angle, D28300 command]
[Ingest 21:55:19 INFO] Sending XML status message
[Status 21:55:19 INFO] Mirror angle: 120
[Mirror 21:55:19 INFO] rotating to position A
[Status 21:55:21 INFO] .SET file for ACQ96 ready
[Ingest 21:55:21 INFO] Starting acquisition
[Status 21:55:21 INFO] reading housekeeping
[Status 21:55:39 INFO] acquire complete
[Status 21:55:40 INFO] writing housekeeping
[Sequencer 21:55:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:55:40 INFO] incremented A scene to 387 completed views
[Sequencer 21:55:40 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:55:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:55:40 INFO] incremented to [AERI set: name S387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:55:40 INFO] A387.SIG(18)
[sigmove 21:55:40 DEBUG] transformed A387Ma.SPC -> A387MA.SPC
[sigmove 21:55:40 DEBUG] transformed A387Mb.SPC -> A387MB.SPC
[sigmove 21:55:40 DEBUG] transformed A387Mc.SPC -> A387MC.SPC
[sigmove 21:55:40 DEBUG] transformed A387Md.SPC -> A387MD.SPC
[sigmove 21:55:40 DEBUG] transformed A387Me.SPC -> A387ME.SPC
[sigmove 21:55:40 DEBUG] transformed A387Mf.SPC -> A387MF.SPC
[Status 21:55:40 INFO] data for A387 transferred to science data processing
[Tidy 21:55:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:55:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:55:40 INFO] resetting WatchDogTimer
[Status 21:55:41 INFO] Starting Set [AERI set: name S387, 6 scans, 0 angle, D16300 command]
[Ingest 21:55:41 INFO] Sending XML status message
[Status 21:55:41 INFO] Mirror angle: 0
[Mirror 21:55:41 INFO] rotating to position S
[Status 21:55:43 INFO] .SET file for ACQ96 ready
[Ingest 21:55:43 INFO] Starting acquisition
[Status 21:55:44 INFO] reading housekeeping
[Status 21:56:01 INFO] acquire complete
[Status 21:56:03 INFO] writing housekeeping
[Sequencer 21:56:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:56:03 INFO] incremented S scene to 387 completed views
[Sequencer 21:56:03 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:56:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:56:03 INFO] incremented to [AERI set: name T387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:56:03 INFO] S387.SIG(18)
[sigmove 21:56:03 DEBUG] transformed S387Ma.SPC -> S387MA.SPC
[sigmove 21:56:03 DEBUG] transformed S387Mb.SPC -> S387MB.SPC
[sigmove 21:56:03 DEBUG] transformed S387Mc.SPC -> S387MC.SPC
[sigmove 21:56:03 DEBUG] transformed S387Md.SPC -> S387MD.SPC
[sigmove 21:56:03 DEBUG] transformed S387Me.SPC -> S387ME.SPC
[sigmove 21:56:03 DEBUG] transformed S387Mf.SPC -> S387MF.SPC
[Status 21:56:03 INFO] data for S387 transferred to science data processing
[Tidy 21:56:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:56:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:56:03 INFO] resetting WatchDogTimer
[Status 21:56:03 INFO] Starting Set [AERI set: name T387, 6 scans, 0 angle, D16300 command]
[Ingest 21:56:03 INFO] Sending XML status message
[Status 21:56:03 INFO] Mirror angle: 0
[Mirror 21:56:04 INFO] rotating to position T
[Status 21:56:04 INFO] .SET file for ACQ96 ready
[Ingest 21:56:05 INFO] Starting acquisition
[Status 21:56:05 INFO] reading housekeeping
[Status 21:56:23 INFO] acquire complete
[Status 21:56:24 INFO] writing housekeeping
[Sequencer 21:56:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:56:24 INFO] incremented T scene to 387 completed views
[Sequencer 21:56:24 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:56:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:56:24 INFO] incremented to [AERI set: name U387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:56:24 INFO] T387.SIG(18)
[sigmove 21:56:24 DEBUG] transformed T387Ma.SPC -> T387MA.SPC
[sigmove 21:56:24 DEBUG] transformed T387Mb.SPC -> T387MB.SPC
[sigmove 21:56:24 DEBUG] transformed T387Mc.SPC -> T387MC.SPC
[sigmove 21:56:24 DEBUG] transformed T387Md.SPC -> T387MD.SPC
[sigmove 21:56:24 DEBUG] transformed T387Me.SPC -> T387ME.SPC
[sigmove 21:56:24 DEBUG] transformed T387Mf.SPC -> T387MF.SPC
[Status 21:56:24 INFO] data for T387 transferred to science data processing
[Tidy 21:56:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:56:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:56:24 INFO] resetting WatchDogTimer
[Status 21:56:24 INFO] Starting Set [AERI set: name U387, 6 scans, 0 angle, D16300 command]
[Ingest 21:56:24 INFO] Sending XML status message
[Status 21:56:24 INFO] Mirror angle: 0
[Mirror 21:56:25 INFO] rotating to position U
[Status 21:56:26 INFO] .SET file for ACQ96 ready
[Ingest 21:56:26 INFO] Starting acquisition
[Status 21:56:26 INFO] reading housekeeping
[Status 21:56:49 INFO] acquire complete
[Status 21:56:50 INFO] writing housekeeping
[Sequencer 21:56:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:56:50 INFO] incremented U scene to 387 completed views
[Sequencer 21:56:50 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:56:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:56:50 INFO] incremented to [AERI set: name V387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:56:50 INFO] U387.SIG(18)
[sigmove 21:56:50 DEBUG] transformed U387Ma.SPC -> U387MA.SPC
[sigmove 21:56:50 DEBUG] transformed U387Mb.SPC -> U387MB.SPC
[sigmove 21:56:50 DEBUG] transformed U387Mc.SPC -> U387MC.SPC
[sigmove 21:56:50 DEBUG] transformed U387Md.SPC -> U387MD.SPC
[sigmove 21:56:50 DEBUG] transformed U387Me.SPC -> U387ME.SPC
[sigmove 21:56:50 DEBUG] transformed U387Mf.SPC -> U387MF.SPC
[Status 21:56:50 INFO] data for U387 transferred to science data processing
[Tidy 21:56:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:56:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:56:50 INFO] resetting WatchDogTimer
[Status 21:56:50 INFO] Starting Set [AERI set: name V387, 6 scans, 0 angle, D16300 command]
[Ingest 21:56:50 INFO] Sending XML status message
[Status 21:56:50 INFO] Mirror angle: 0
[Mirror 21:56:51 INFO] rotating to position V
[Status 21:56:51 INFO] .SET file for ACQ96 ready
[Ingest 21:56:52 INFO] Starting acquisition
[Status 21:56:52 INFO] reading housekeeping
[Status 21:57:10 INFO] acquire complete
[Status 21:57:11 INFO] writing housekeeping
[Sequencer 21:57:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:57:11 INFO] incremented V scene to 387 completed views
[Sequencer 21:57:11 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:57:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:57:11 INFO] incremented to [AERI set: name W387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:57:11 INFO] V387.SIG(18)
[sigmove 21:57:11 DEBUG] transformed V387Ma.SPC -> V387MA.SPC
[sigmove 21:57:11 DEBUG] transformed V387Mb.SPC -> V387MB.SPC
[sigmove 21:57:11 DEBUG] transformed V387Mc.SPC -> V387MC.SPC
[sigmove 21:57:11 DEBUG] transformed V387Md.SPC -> V387MD.SPC
[sigmove 21:57:11 DEBUG] transformed V387Me.SPC -> V387ME.SPC
[sigmove 21:57:11 DEBUG] transformed V387Mf.SPC -> V387MF.SPC
[Status 21:57:11 INFO] data for V387 transferred to science data processing
[Tidy 21:57:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:57:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:57:11 INFO] resetting WatchDogTimer
[Status 21:57:12 INFO] Starting Set [AERI set: name W387, 6 scans, 0 angle, D16300 command]
[Ingest 21:57:12 INFO] Sending XML status message
[Status 21:57:12 INFO] Mirror angle: 0
[Mirror 21:57:12 INFO] rotating to position W
[Status 21:57:13 INFO] .SET file for ACQ96 ready
[Ingest 21:57:13 INFO] Starting acquisition
[Status 21:57:14 INFO] reading housekeeping
[Status 21:57:31 INFO] acquire complete
[Status 21:57:32 INFO] writing housekeeping
[Sequencer 21:57:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:57:32 INFO] incremented W scene to 387 completed views
[Sequencer 21:57:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:57:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:57:32 INFO] incremented to [AERI set: name X387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:57:32 INFO] W387.SIG(18)
[sigmove 21:57:32 DEBUG] transformed W387Ma.SPC -> W387MA.SPC
[sigmove 21:57:32 DEBUG] transformed W387Mb.SPC -> W387MB.SPC
[sigmove 21:57:32 DEBUG] transformed W387Mc.SPC -> W387MC.SPC
[sigmove 21:57:32 DEBUG] transformed W387Md.SPC -> W387MD.SPC
[sigmove 21:57:32 DEBUG] transformed W387Me.SPC -> W387ME.SPC
[sigmove 21:57:32 DEBUG] transformed W387Mf.SPC -> W387MF.SPC
[Status 21:57:32 INFO] data for W387 transferred to science data processing
[Tidy 21:57:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:57:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:57:32 INFO] resetting WatchDogTimer
[Status 21:57:33 INFO] Starting Set [AERI set: name X387, 6 scans, 0 angle, D16300 command]
[Ingest 21:57:33 INFO] Sending XML status message
[Status 21:57:33 INFO] Mirror angle: 0
[Mirror 21:57:33 INFO] rotating to position X
[Status 21:57:34 INFO] .SET file for ACQ96 ready
[Ingest 21:57:34 INFO] Starting acquisition
[Status 21:57:35 INFO] reading housekeeping
[Status 21:57:52 INFO] acquire complete
[Status 21:57:54 INFO] writing housekeeping
[Sequencer 21:57:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:57:54 INFO] incremented X scene to 387 completed views
[Sequencer 21:57:54 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:57:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:57:54 INFO] incremented to [AERI set: name Y387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:57:54 INFO] X387.SIG(18)
[sigmove 21:57:54 DEBUG] transformed X387Ma.SPC -> X387MA.SPC
[sigmove 21:57:54 DEBUG] transformed X387Mb.SPC -> X387MB.SPC
[sigmove 21:57:54 DEBUG] transformed X387Mc.SPC -> X387MC.SPC
[sigmove 21:57:54 DEBUG] transformed X387Md.SPC -> X387MD.SPC
[sigmove 21:57:54 DEBUG] transformed X387Me.SPC -> X387ME.SPC
[sigmove 21:57:54 DEBUG] transformed X387Mf.SPC -> X387MF.SPC
[Status 21:57:54 INFO] data for X387 transferred to science data processing
[Tidy 21:57:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:57:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:57:54 INFO] resetting WatchDogTimer
[Status 21:57:54 INFO] Starting Set [AERI set: name Y387, 6 scans, 0 angle, D16300 command]
[Ingest 21:57:54 INFO] Sending XML status message
[Status 21:57:54 INFO] Mirror angle: 0
[Mirror 21:57:55 INFO] rotating to position Y
[Status 21:57:55 INFO] .SET file for ACQ96 ready
[Ingest 21:57:56 INFO] Starting acquisition
[Status 21:57:56 INFO] reading housekeeping
[Status 21:58:14 INFO] acquire complete
[Status 21:58:16 INFO] writing housekeeping
[Sequencer 21:58:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:58:16 INFO] incremented Y scene to 387 completed views
[Sequencer 21:58:16 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:58:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:58:16 INFO] incremented to [AERI set: name Z387, 6 scans, 0 angle, D16300 command] set
[sigmove 21:58:16 INFO] Y387.SIG(18)
[sigmove 21:58:16 DEBUG] transformed Y387Ma.SPC -> Y387MA.SPC
[sigmove 21:58:16 DEBUG] transformed Y387Mb.SPC -> Y387MB.SPC
[sigmove 21:58:16 DEBUG] transformed Y387Mc.SPC -> Y387MC.SPC
[sigmove 21:58:16 DEBUG] transformed Y387Md.SPC -> Y387MD.SPC
[sigmove 21:58:16 DEBUG] transformed Y387Me.SPC -> Y387ME.SPC
[sigmove 21:58:16 DEBUG] transformed Y387Mf.SPC -> Y387MF.SPC
[Status 21:58:16 INFO] data for Y387 transferred to science data processing
[Tidy 21:58:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:58:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:58:16 INFO] resetting WatchDogTimer
[Status 21:58:17 INFO] Starting Set [AERI set: name Z387, 6 scans, 0 angle, D16300 command]
[Ingest 21:58:17 INFO] Sending XML status message
[Status 21:58:17 INFO] Mirror angle: 0
[Mirror 21:58:17 INFO] rotating to position Z
[Status 21:58:18 INFO] .SET file for ACQ96 ready
[Ingest 21:58:18 INFO] Starting acquisition
[Status 21:58:19 INFO] reading housekeeping
[Status 21:58:36 INFO] acquire complete
[Status 21:58:37 INFO] writing housekeeping
[Sequencer 21:58:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:58:37 INFO] incremented Z scene to 387 completed views
[Sequencer 21:58:37 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 21:58:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:58:37 INFO] incremented to [AERI set: name A388, 6 scans, 120 angle, D28300 command] set
[sigmove 21:58:37 INFO] Z387.SIG(18)
[sigmove 21:58:37 DEBUG] transformed Z387Ma.SPC -> Z387MA.SPC
[sigmove 21:58:37 DEBUG] transformed Z387Mb.SPC -> Z387MB.SPC
[sigmove 21:58:37 DEBUG] transformed Z387Mc.SPC -> Z387MC.SPC
[sigmove 21:58:37 DEBUG] transformed Z387Md.SPC -> Z387MD.SPC
[sigmove 21:58:37 DEBUG] transformed Z387Me.SPC -> Z387ME.SPC
[sigmove 21:58:37 DEBUG] transformed Z387Mf.SPC -> Z387MF.SPC
[Status 21:58:37 INFO] data for Z387 transferred to science data processing
[Tidy 21:58:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:58:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:58:37 INFO] resetting WatchDogTimer
[Status 21:58:38 INFO] Starting Set [AERI set: name A388, 6 scans, 120 angle, D28300 command]
[Ingest 21:58:38 INFO] Sending XML status message
[Status 21:58:38 INFO] Mirror angle: 120
[Mirror 21:58:38 INFO] rotating to position A
[Status 21:58:40 INFO] .SET file for ACQ96 ready
[Ingest 21:58:40 INFO] Starting acquisition
[Status 21:58:41 INFO] reading housekeeping
[Status 21:58:59 INFO] acquire complete
[Status 21:59:00 INFO] writing housekeeping
[Sequencer 21:59:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:59:00 INFO] incremented A scene to 388 completed views
[Sequencer 21:59:00 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 21:59:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:59:00 INFO] incremented to [AERI set: name H388, 6 scans, 60 angle, D22500 command] set
[sigmove 21:59:00 INFO] A388.SIG(18)
[sigmove 21:59:00 DEBUG] transformed A388Ma.SPC -> A388MA.SPC
[sigmove 21:59:00 DEBUG] transformed A388Mb.SPC -> A388MB.SPC
[sigmove 21:59:00 DEBUG] transformed A388Mc.SPC -> A388MC.SPC
[sigmove 21:59:00 DEBUG] transformed A388Md.SPC -> A388MD.SPC
[sigmove 21:59:00 DEBUG] transformed A388Me.SPC -> A388ME.SPC
[sigmove 21:59:00 DEBUG] transformed A388Mf.SPC -> A388MF.SPC
[Status 21:59:00 INFO] data for A388 transferred to science data processing
[Tidy 21:59:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:59:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:59:00 INFO] resetting WatchDogTimer
[Status 21:59:00 INFO] Starting Set [AERI set: name H388, 6 scans, 60 angle, D22500 command]
[Ingest 21:59:00 INFO] Sending XML status message
[Status 21:59:00 INFO] Mirror angle: 60
[Mirror 21:59:01 INFO] rotating to position H
[Status 21:59:02 INFO] .SET file for ACQ96 ready
[Ingest 21:59:02 INFO] Starting acquisition
[Status 21:59:03 INFO] reading housekeeping
[Status 21:59:20 INFO] acquire complete
[Status 21:59:21 INFO] writing housekeeping
[Sequencer 21:59:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:59:21 INFO] incremented H scene to 388 completed views
[Sequencer 21:59:21 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 21:59:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:59:21 INFO] incremented to [AERI set: name S388, 6 scans, 0 angle, D16300 command] set
[sigmove 21:59:21 INFO] H388.SIG(18)
[sigmove 21:59:21 DEBUG] transformed H388Ma.SPC -> H388MA.SPC
[sigmove 21:59:21 DEBUG] transformed H388Mb.SPC -> H388MB.SPC
[sigmove 21:59:21 DEBUG] transformed H388Mc.SPC -> H388MC.SPC
[sigmove 21:59:21 DEBUG] transformed H388Md.SPC -> H388MD.SPC
[sigmove 21:59:21 DEBUG] transformed H388Me.SPC -> H388ME.SPC
[sigmove 21:59:21 DEBUG] transformed H388Mf.SPC -> H388MF.SPC
[Status 21:59:21 INFO] data for H388 transferred to science data processing
[Tidy 21:59:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:59:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:59:21 INFO] resetting WatchDogTimer
[Status 21:59:22 INFO] Starting Set [AERI set: name S388, 6 scans, 0 angle, D16300 command]
[Ingest 21:59:22 INFO] Sending XML status message
[Status 21:59:22 INFO] Mirror angle: 0
[Mirror 21:59:22 INFO] rotating to position S
[Status 21:59:23 INFO] .SET file for ACQ96 ready
[Ingest 21:59:24 INFO] Starting acquisition
[Status 21:59:24 INFO] reading housekeeping
[Status 21:59:41 INFO] acquire complete
[Status 21:59:42 INFO] writing housekeeping
[Sequencer 21:59:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 21:59:42 INFO] incremented S scene to 388 completed views
[Sequencer 21:59:42 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 21:59:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 21:59:42 INFO] incremented to [AERI set: name T388, 6 scans, 0 angle, D16300 command] set
[sigmove 21:59:42 INFO] S388.SIG(18)
[sigmove 21:59:42 DEBUG] transformed S388Ma.SPC -> S388MA.SPC
[sigmove 21:59:42 DEBUG] transformed S388Mb.SPC -> S388MB.SPC
[sigmove 21:59:42 DEBUG] transformed S388Mc.SPC -> S388MC.SPC
[sigmove 21:59:42 DEBUG] transformed S388Md.SPC -> S388MD.SPC
[sigmove 21:59:42 DEBUG] transformed S388Me.SPC -> S388ME.SPC
[sigmove 21:59:42 DEBUG] transformed S388Mf.SPC -> S388MF.SPC
[Status 21:59:42 INFO] data for S388 transferred to science data processing
[Tidy 21:59:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 21:59:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 21:59:42 INFO] resetting WatchDogTimer
[Status 21:59:43 INFO] Starting Set [AERI set: name T388, 6 scans, 0 angle, D16300 command]
[Ingest 21:59:43 INFO] Sending XML status message
[Status 21:59:43 INFO] Mirror angle: 0
[Mirror 21:59:43 INFO] rotating to position T
[Status 21:59:44 INFO] .SET file for ACQ96 ready
[Ingest 21:59:44 INFO] Starting acquisition
[Status 21:59:45 INFO] reading housekeeping
[Status 22:00:03 INFO] acquire complete
[Status 22:00:04 INFO] writing housekeeping
[Sequencer 22:00:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:00:04 INFO] incremented T scene to 388 completed views
[Sequencer 22:00:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:00:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:00:04 INFO] incremented to [AERI set: name U388, 6 scans, 0 angle, D16300 command] set
[sigmove 22:00:04 INFO] T388.SIG(18)
[sigmove 22:00:04 DEBUG] transformed T388Ma.SPC -> T388MA.SPC
[sigmove 22:00:04 DEBUG] transformed T388Mb.SPC -> T388MB.SPC
[sigmove 22:00:04 DEBUG] transformed T388Mc.SPC -> T388MC.SPC
[sigmove 22:00:04 DEBUG] transformed T388Md.SPC -> T388MD.SPC
[sigmove 22:00:04 DEBUG] transformed T388Me.SPC -> T388ME.SPC
[sigmove 22:00:04 DEBUG] transformed T388Mf.SPC -> T388MF.SPC
[Status 22:00:04 INFO] data for T388 transferred to science data processing
[Tidy 22:00:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:00:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:00:04 INFO] resetting WatchDogTimer
[Status 22:00:04 INFO] Starting Set [AERI set: name U388, 6 scans, 0 angle, D16300 command]
[Ingest 22:00:04 INFO] Sending XML status message
[Status 22:00:04 INFO] Mirror angle: 0
[Mirror 22:00:05 INFO] rotating to position U
[Status 22:00:05 INFO] .SET file for ACQ96 ready
[Ingest 22:00:06 INFO] Starting acquisition
[Status 22:00:06 INFO] reading housekeeping
[Status 22:00:24 INFO] acquire complete
[Status 22:00:25 INFO] writing housekeeping
[Sequencer 22:00:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:00:25 INFO] incremented U scene to 388 completed views
[Sequencer 22:00:25 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:00:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:00:25 INFO] incremented to [AERI set: name V388, 6 scans, 0 angle, D16300 command] set
[sigmove 22:00:25 INFO] U388.SIG(18)
[sigmove 22:00:25 DEBUG] transformed U388Ma.SPC -> U388MA.SPC
[sigmove 22:00:25 DEBUG] transformed U388Mb.SPC -> U388MB.SPC
[sigmove 22:00:25 DEBUG] transformed U388Mc.SPC -> U388MC.SPC
[sigmove 22:00:25 DEBUG] transformed U388Md.SPC -> U388MD.SPC
[sigmove 22:00:25 DEBUG] transformed U388Me.SPC -> U388ME.SPC
[sigmove 22:00:25 DEBUG] transformed U388Mf.SPC -> U388MF.SPC
[Status 22:00:25 INFO] data for U388 transferred to science data processing
[Tidy 22:00:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:00:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:00:25 INFO] resetting WatchDogTimer
[Status 22:00:26 INFO] Starting Set [AERI set: name V388, 6 scans, 0 angle, D16300 command]
[Ingest 22:00:26 INFO] Sending XML status message
[Status 22:00:26 INFO] Mirror angle: 0
[Mirror 22:00:26 INFO] rotating to position V
[Status 22:00:27 INFO] .SET file for ACQ96 ready
[Ingest 22:00:27 INFO] Starting acquisition
[Status 22:00:28 INFO] reading housekeeping
[Status 22:00:45 INFO] acquire complete
[Status 22:00:46 INFO] writing housekeeping
[Sequencer 22:00:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:00:46 INFO] incremented V scene to 388 completed views
[Sequencer 22:00:46 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:00:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:00:46 INFO] incremented to [AERI set: name W388, 6 scans, 0 angle, D16300 command] set
[sigmove 22:00:46 INFO] V388.SIG(18)
[sigmove 22:00:46 DEBUG] transformed V388Ma.SPC -> V388MA.SPC
[sigmove 22:00:46 DEBUG] transformed V388Mb.SPC -> V388MB.SPC
[sigmove 22:00:46 DEBUG] transformed V388Mc.SPC -> V388MC.SPC
[sigmove 22:00:46 DEBUG] transformed V388Md.SPC -> V388MD.SPC
[sigmove 22:00:46 DEBUG] transformed V388Me.SPC -> V388ME.SPC
[sigmove 22:00:46 DEBUG] transformed V388Mf.SPC -> V388MF.SPC
[Status 22:00:46 INFO] data for V388 transferred to science data processing
[Tidy 22:00:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:00:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:00:46 INFO] resetting WatchDogTimer
[Status 22:00:47 INFO] Starting Set [AERI set: name W388, 6 scans, 0 angle, D16300 command]
[Ingest 22:00:47 INFO] Sending XML status message
[Status 22:00:47 INFO] Mirror angle: 0
[Mirror 22:00:47 INFO] rotating to position W
[Status 22:00:48 INFO] .SET file for ACQ96 ready
[Ingest 22:00:48 INFO] Starting acquisition
[Status 22:00:49 INFO] reading housekeeping
[Status 22:01:06 INFO] acquire complete
[Status 22:01:08 INFO] writing housekeeping
[Sequencer 22:01:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:01:08 INFO] incremented W scene to 388 completed views
[Sequencer 22:01:08 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:01:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:01:08 INFO] incremented to [AERI set: name X388, 6 scans, 0 angle, D16300 command] set
[sigmove 22:01:08 INFO] W388.SIG(18)
[sigmove 22:01:08 DEBUG] transformed W388Ma.SPC -> W388MA.SPC
[sigmove 22:01:08 DEBUG] transformed W388Mb.SPC -> W388MB.SPC
[sigmove 22:01:08 DEBUG] transformed W388Mc.SPC -> W388MC.SPC
[sigmove 22:01:08 DEBUG] transformed W388Md.SPC -> W388MD.SPC
[sigmove 22:01:08 DEBUG] transformed W388Me.SPC -> W388ME.SPC
[sigmove 22:01:08 DEBUG] transformed W388Mf.SPC -> W388MF.SPC
[Status 22:01:08 INFO] data for W388 transferred to science data processing
[Tidy 22:01:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:01:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:01:08 INFO] resetting WatchDogTimer
[Status 22:01:08 INFO] Starting Set [AERI set: name X388, 6 scans, 0 angle, D16300 command]
[Ingest 22:01:08 INFO] Sending XML status message
[Status 22:01:08 INFO] Mirror angle: 0
[Mirror 22:01:09 INFO] rotating to position X
[Status 22:01:09 INFO] .SET file for ACQ96 ready
[Ingest 22:01:10 INFO] Starting acquisition
[Status 22:01:10 INFO] reading housekeeping
[Status 22:01:28 INFO] acquire complete
[Status 22:01:29 INFO] writing housekeeping
[Sequencer 22:01:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:01:29 INFO] incremented X scene to 388 completed views
[Sequencer 22:01:29 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:01:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:01:29 INFO] incremented to [AERI set: name Y388, 6 scans, 0 angle, D16300 command] set
[sigmove 22:01:29 INFO] X388.SIG(18)
[sigmove 22:01:29 DEBUG] transformed X388Ma.SPC -> X388MA.SPC
[sigmove 22:01:29 DEBUG] transformed X388Mb.SPC -> X388MB.SPC
[sigmove 22:01:29 DEBUG] transformed X388Mc.SPC -> X388MC.SPC
[sigmove 22:01:29 DEBUG] transformed X388Md.SPC -> X388MD.SPC
[sigmove 22:01:29 DEBUG] transformed X388Me.SPC -> X388ME.SPC
[sigmove 22:01:29 DEBUG] transformed X388Mf.SPC -> X388MF.SPC
[Status 22:01:29 INFO] data for X388 transferred to science data processing
[Tidy 22:01:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:01:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:01:29 INFO] resetting WatchDogTimer
[Status 22:01:30 INFO] Starting Set [AERI set: name Y388, 6 scans, 0 angle, D16300 command]
[Ingest 22:01:30 INFO] Sending XML status message
[Status 22:01:30 INFO] Mirror angle: 0
[Mirror 22:01:30 INFO] rotating to position Y
[Status 22:01:31 INFO] .SET file for ACQ96 ready
[Ingest 22:01:31 INFO] Starting acquisition
[Status 22:01:32 INFO] reading housekeeping
[Status 22:01:49 INFO] acquire complete
[Status 22:01:52 INFO] writing housekeeping
[Sequencer 22:01:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:01:52 INFO] incremented Y scene to 388 completed views
[Sequencer 22:01:52 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:01:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:01:52 INFO] incremented to [AERI set: name Z388, 6 scans, 0 angle, D16300 command] set
[sigmove 22:01:52 INFO] Y388.SIG(18)
[sigmove 22:01:52 DEBUG] transformed Y388Ma.SPC -> Y388MA.SPC
[sigmove 22:01:52 DEBUG] transformed Y388Mb.SPC -> Y388MB.SPC
[sigmove 22:01:52 DEBUG] transformed Y388Mc.SPC -> Y388MC.SPC
[sigmove 22:01:52 DEBUG] transformed Y388Md.SPC -> Y388MD.SPC
[sigmove 22:01:52 DEBUG] transformed Y388Me.SPC -> Y388ME.SPC
[sigmove 22:01:52 DEBUG] transformed Y388Mf.SPC -> Y388MF.SPC
[Status 22:01:52 INFO] data for Y388 transferred to science data processing
[Tidy 22:01:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:01:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:01:52 INFO] resetting WatchDogTimer
[Status 22:01:52 INFO] Starting Set [AERI set: name Z388, 6 scans, 0 angle, D16300 command]
[Ingest 22:01:52 INFO] Sending XML status message
[Status 22:01:52 INFO] Mirror angle: 0
[Mirror 22:01:53 INFO] rotating to position Z
[Status 22:01:53 INFO] .SET file for ACQ96 ready
[Ingest 22:01:54 INFO] Starting acquisition
[Status 22:01:54 INFO] reading housekeeping
[Status 22:02:12 INFO] acquire complete
[Status 22:02:13 INFO] writing housekeeping
[Sequencer 22:02:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:02:13 INFO] incremented Z scene to 388 completed views
[Sequencer 22:02:13 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:02:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:02:13 INFO] incremented to [AERI set: name H389, 6 scans, 60 angle, D22500 command] set
[sigmove 22:02:13 INFO] Z388.SIG(18)
[sigmove 22:02:13 DEBUG] transformed Z388Ma.SPC -> Z388MA.SPC
[sigmove 22:02:13 DEBUG] transformed Z388Mb.SPC -> Z388MB.SPC
[sigmove 22:02:13 DEBUG] transformed Z388Mc.SPC -> Z388MC.SPC
[sigmove 22:02:13 DEBUG] transformed Z388Md.SPC -> Z388MD.SPC
[sigmove 22:02:13 DEBUG] transformed Z388Me.SPC -> Z388ME.SPC
[sigmove 22:02:13 DEBUG] transformed Z388Mf.SPC -> Z388MF.SPC
[Status 22:02:13 INFO] data for Z388 transferred to science data processing
[Tidy 22:02:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:02:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:02:13 INFO] resetting WatchDogTimer
[Status 22:02:13 INFO] Starting Set [AERI set: name H389, 6 scans, 60 angle, D22500 command]
[Ingest 22:02:13 INFO] Sending XML status message
[Status 22:02:13 INFO] Mirror angle: 60
[Mirror 22:02:14 INFO] rotating to position H
[Status 22:02:15 INFO] .SET file for ACQ96 ready
[Ingest 22:02:15 INFO] Starting acquisition
[Status 22:02:16 INFO] reading housekeeping
[Status 22:02:34 INFO] acquire complete
[Status 22:02:35 INFO] writing housekeeping
[Sequencer 22:02:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:02:35 INFO] incremented H scene to 389 completed views
[Sequencer 22:02:35 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:02:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:02:35 INFO] incremented to [AERI set: name A389, 6 scans, 120 angle, D28300 command] set
[sigmove 22:02:35 INFO] H389.SIG(18)
[sigmove 22:02:35 DEBUG] transformed H389Ma.SPC -> H389MA.SPC
[sigmove 22:02:35 DEBUG] transformed H389Mb.SPC -> H389MB.SPC
[sigmove 22:02:35 DEBUG] transformed H389Mc.SPC -> H389MC.SPC
[sigmove 22:02:35 DEBUG] transformed H389Md.SPC -> H389MD.SPC
[sigmove 22:02:35 DEBUG] transformed H389Me.SPC -> H389ME.SPC
[sigmove 22:02:35 DEBUG] transformed H389Mf.SPC -> H389MF.SPC
[Status 22:02:35 INFO] data for H389 transferred to science data processing
[Tidy 22:02:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:02:35 INFO] A387.FIN(19),H387.FIN(19),S387.FIN(19),T387.FIN(19),U387.FIN(19),V387.FIN(19),W387.FIN(19),X387.FIN(19),Y387.FIN(19),Z387.FIN(19),A388.FIN(19),H388.FIN(19),S388.FIN(19),T388.FIN(19),U388.FIN(19),V388.FIN(19),W388.FIN(19),X388.FIN(19),Y388.FIN(19),Z388.FIN(19)
[sigmove 22:02:35 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:02:35 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:02:42 DEBUG] done zipping
[WatchDog 22:02:42 INFO] resetting WatchDogTimer
[Status 22:02:43 INFO] Starting Set [AERI set: name A389, 6 scans, 120 angle, D28300 command]
[Ingest 22:02:43 INFO] Sending XML status message
[Status 22:02:43 INFO] Mirror angle: 120
[Mirror 22:02:43 INFO] rotating to position A
[Status 22:02:45 INFO] .SET file for ACQ96 ready
[Ingest 22:02:45 INFO] Starting acquisition
[Status 22:02:46 INFO] reading housekeeping
[Status 22:03:03 INFO] acquire complete
[Status 22:03:04 INFO] writing housekeeping
[Sequencer 22:03:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:03:04 INFO] incremented A scene to 389 completed views
[Sequencer 22:03:04 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:03:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:03:04 INFO] incremented to [AERI set: name S389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:03:04 INFO] A389.SIG(18)
[sigmove 22:03:04 DEBUG] transformed A389Ma.SPC -> A389MA.SPC
[sigmove 22:03:04 DEBUG] transformed A389Mb.SPC -> A389MB.SPC
[sigmove 22:03:04 DEBUG] transformed A389Mc.SPC -> A389MC.SPC
[sigmove 22:03:04 DEBUG] transformed A389Md.SPC -> A389MD.SPC
[sigmove 22:03:04 DEBUG] transformed A389Me.SPC -> A389ME.SPC
[sigmove 22:03:04 DEBUG] transformed A389Mf.SPC -> A389MF.SPC
[Status 22:03:04 INFO] data for A389 transferred to science data processing
[Tidy 22:03:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:03:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:03:04 INFO] resetting WatchDogTimer
[Status 22:03:05 INFO] Starting Set [AERI set: name S389, 6 scans, 0 angle, D16300 command]
[Ingest 22:03:05 INFO] Sending XML status message
[Status 22:03:05 INFO] Mirror angle: 0
[Mirror 22:03:05 INFO] rotating to position S
[Status 22:03:07 INFO] .SET file for ACQ96 ready
[Ingest 22:03:07 INFO] Starting acquisition
[Status 22:03:08 INFO] reading housekeeping
[Status 22:03:26 INFO] acquire complete
[Status 22:03:27 INFO] writing housekeeping
[Sequencer 22:03:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:03:27 INFO] incremented S scene to 389 completed views
[Sequencer 22:03:27 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:03:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:03:27 INFO] incremented to [AERI set: name T389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:03:27 INFO] S389.SIG(18)
[sigmove 22:03:27 DEBUG] transformed S389Ma.SPC -> S389MA.SPC
[sigmove 22:03:27 DEBUG] transformed S389Mb.SPC -> S389MB.SPC
[sigmove 22:03:27 DEBUG] transformed S389Mc.SPC -> S389MC.SPC
[sigmove 22:03:27 DEBUG] transformed S389Md.SPC -> S389MD.SPC
[sigmove 22:03:27 DEBUG] transformed S389Me.SPC -> S389ME.SPC
[sigmove 22:03:27 DEBUG] transformed S389Mf.SPC -> S389MF.SPC
[Status 22:03:27 INFO] data for S389 transferred to science data processing
[Tidy 22:03:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:03:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:03:27 INFO] resetting WatchDogTimer
[Status 22:03:27 INFO] Starting Set [AERI set: name T389, 6 scans, 0 angle, D16300 command]
[Ingest 22:03:27 INFO] Sending XML status message
[Status 22:03:27 INFO] Mirror angle: 0
[Mirror 22:03:28 INFO] rotating to position T
[Status 22:03:28 INFO] .SET file for ACQ96 ready
[Ingest 22:03:29 INFO] Starting acquisition
[Status 22:03:29 INFO] reading housekeeping
[Status 22:03:47 INFO] acquire complete
[Status 22:03:48 INFO] writing housekeeping
[Sequencer 22:03:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:03:48 INFO] incremented T scene to 389 completed views
[Sequencer 22:03:48 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:03:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:03:48 INFO] incremented to [AERI set: name U389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:03:48 INFO] T389.SIG(18)
[sigmove 22:03:48 DEBUG] transformed T389Ma.SPC -> T389MA.SPC
[sigmove 22:03:48 DEBUG] transformed T389Mb.SPC -> T389MB.SPC
[sigmove 22:03:48 DEBUG] transformed T389Mc.SPC -> T389MC.SPC
[sigmove 22:03:48 DEBUG] transformed T389Md.SPC -> T389MD.SPC
[sigmove 22:03:48 DEBUG] transformed T389Me.SPC -> T389ME.SPC
[sigmove 22:03:48 DEBUG] transformed T389Mf.SPC -> T389MF.SPC
[Status 22:03:48 INFO] data for T389 transferred to science data processing
[Tidy 22:03:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:03:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:03:48 INFO] resetting WatchDogTimer
[Status 22:03:49 INFO] Starting Set [AERI set: name U389, 6 scans, 0 angle, D16300 command]
[Ingest 22:03:49 INFO] Sending XML status message
[Status 22:03:49 INFO] Mirror angle: 0
[Mirror 22:03:49 INFO] rotating to position U
[Status 22:03:50 INFO] .SET file for ACQ96 ready
[Ingest 22:03:50 INFO] Starting acquisition
[Status 22:03:51 INFO] reading housekeeping
[Status 22:04:08 INFO] acquire complete
[Status 22:04:09 INFO] writing housekeeping
[Sequencer 22:04:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:04:09 INFO] incremented U scene to 389 completed views
[Sequencer 22:04:09 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:04:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:04:09 INFO] incremented to [AERI set: name V389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:04:09 INFO] U389.SIG(18)
[sigmove 22:04:09 DEBUG] transformed U389Ma.SPC -> U389MA.SPC
[sigmove 22:04:09 DEBUG] transformed U389Mb.SPC -> U389MB.SPC
[sigmove 22:04:09 DEBUG] transformed U389Mc.SPC -> U389MC.SPC
[sigmove 22:04:09 DEBUG] transformed U389Md.SPC -> U389MD.SPC
[sigmove 22:04:09 DEBUG] transformed U389Me.SPC -> U389ME.SPC
[sigmove 22:04:09 DEBUG] transformed U389Mf.SPC -> U389MF.SPC
[Status 22:04:09 INFO] data for U389 transferred to science data processing
[Tidy 22:04:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:04:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:04:09 INFO] resetting WatchDogTimer
[Status 22:04:10 INFO] Starting Set [AERI set: name V389, 6 scans, 0 angle, D16300 command]
[Ingest 22:04:10 INFO] Sending XML status message
[Status 22:04:10 INFO] Mirror angle: 0
[Mirror 22:04:10 INFO] rotating to position V
[Status 22:04:11 INFO] .SET file for ACQ96 ready
[Ingest 22:04:11 INFO] Starting acquisition
[Status 22:04:12 INFO] reading housekeeping
[Status 22:04:29 INFO] acquire complete
[Status 22:04:31 INFO] writing housekeeping
[Sequencer 22:04:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:04:31 INFO] incremented V scene to 389 completed views
[Sequencer 22:04:31 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:04:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:04:31 INFO] incremented to [AERI set: name W389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:04:31 INFO] V389.SIG(18)
[sigmove 22:04:31 DEBUG] transformed V389Ma.SPC -> V389MA.SPC
[sigmove 22:04:31 DEBUG] transformed V389Mb.SPC -> V389MB.SPC
[sigmove 22:04:31 DEBUG] transformed V389Mc.SPC -> V389MC.SPC
[sigmove 22:04:31 DEBUG] transformed V389Md.SPC -> V389MD.SPC
[sigmove 22:04:31 DEBUG] transformed V389Me.SPC -> V389ME.SPC
[sigmove 22:04:31 DEBUG] transformed V389Mf.SPC -> V389MF.SPC
[Status 22:04:31 INFO] data for V389 transferred to science data processing
[Tidy 22:04:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:04:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:04:31 INFO] resetting WatchDogTimer
[Status 22:04:31 INFO] Starting Set [AERI set: name W389, 6 scans, 0 angle, D16300 command]
[Ingest 22:04:31 INFO] Sending XML status message
[Status 22:04:31 INFO] Mirror angle: 0
[Mirror 22:04:32 INFO] rotating to position W
[Status 22:04:32 INFO] .SET file for ACQ96 ready
[Ingest 22:04:33 INFO] Starting acquisition
[Status 22:04:33 INFO] reading housekeeping
[Status 22:04:51 INFO] acquire complete
[Status 22:04:52 INFO] writing housekeeping
[Sequencer 22:04:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:04:52 INFO] incremented W scene to 389 completed views
[Sequencer 22:04:52 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:04:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:04:52 INFO] incremented to [AERI set: name X389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:04:52 INFO] W389.SIG(18)
[sigmove 22:04:52 DEBUG] transformed W389Ma.SPC -> W389MA.SPC
[sigmove 22:04:52 DEBUG] transformed W389Mb.SPC -> W389MB.SPC
[sigmove 22:04:52 DEBUG] transformed W389Mc.SPC -> W389MC.SPC
[sigmove 22:04:52 DEBUG] transformed W389Md.SPC -> W389MD.SPC
[sigmove 22:04:52 DEBUG] transformed W389Me.SPC -> W389ME.SPC
[sigmove 22:04:52 DEBUG] transformed W389Mf.SPC -> W389MF.SPC
[Status 22:04:52 INFO] data for W389 transferred to science data processing
[Tidy 22:04:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:04:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:04:52 INFO] resetting WatchDogTimer
[Status 22:04:53 INFO] Starting Set [AERI set: name X389, 6 scans, 0 angle, D16300 command]
[Ingest 22:04:53 INFO] Sending XML status message
[Status 22:04:53 INFO] Mirror angle: 0
[Mirror 22:04:53 INFO] rotating to position X
[Status 22:04:54 INFO] .SET file for ACQ96 ready
[Ingest 22:04:54 INFO] Starting acquisition
[Status 22:04:55 INFO] reading housekeeping
[Status 22:05:12 INFO] acquire complete
[Status 22:05:13 INFO] writing housekeeping
[Sequencer 22:05:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:05:13 INFO] incremented X scene to 389 completed views
[Sequencer 22:05:13 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:05:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:05:13 INFO] incremented to [AERI set: name Y389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:05:13 INFO] X389.SIG(18)
[sigmove 22:05:13 DEBUG] transformed X389Ma.SPC -> X389MA.SPC
[sigmove 22:05:13 DEBUG] transformed X389Mb.SPC -> X389MB.SPC
[sigmove 22:05:13 DEBUG] transformed X389Mc.SPC -> X389MC.SPC
[sigmove 22:05:13 DEBUG] transformed X389Md.SPC -> X389MD.SPC
[sigmove 22:05:13 DEBUG] transformed X389Me.SPC -> X389ME.SPC
[sigmove 22:05:13 DEBUG] transformed X389Mf.SPC -> X389MF.SPC
[Status 22:05:13 INFO] data for X389 transferred to science data processing
[Tidy 22:05:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:05:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:05:13 INFO] resetting WatchDogTimer
[Status 22:05:14 INFO] Starting Set [AERI set: name Y389, 6 scans, 0 angle, D16300 command]
[Ingest 22:05:14 INFO] Sending XML status message
[Status 22:05:14 INFO] Mirror angle: 0
[Mirror 22:05:14 INFO] rotating to position Y
[Status 22:05:15 INFO] .SET file for ACQ96 ready
[Ingest 22:05:15 INFO] Starting acquisition
[Status 22:05:16 INFO] reading housekeeping
[Status 22:05:33 INFO] acquire complete
[Status 22:05:35 INFO] writing housekeeping
[Sequencer 22:05:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:05:35 INFO] incremented Y scene to 389 completed views
[Sequencer 22:05:35 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:05:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:05:35 INFO] incremented to [AERI set: name Z389, 6 scans, 0 angle, D16300 command] set
[sigmove 22:05:35 INFO] Y389.SIG(18)
[sigmove 22:05:35 DEBUG] transformed Y389Ma.SPC -> Y389MA.SPC
[sigmove 22:05:35 DEBUG] transformed Y389Mb.SPC -> Y389MB.SPC
[sigmove 22:05:35 DEBUG] transformed Y389Mc.SPC -> Y389MC.SPC
[sigmove 22:05:35 DEBUG] transformed Y389Md.SPC -> Y389MD.SPC
[sigmove 22:05:35 DEBUG] transformed Y389Me.SPC -> Y389ME.SPC
[sigmove 22:05:35 DEBUG] transformed Y389Mf.SPC -> Y389MF.SPC
[Status 22:05:35 INFO] data for Y389 transferred to science data processing
[Tidy 22:05:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:05:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:05:35 INFO] resetting WatchDogTimer
[Status 22:05:35 INFO] Starting Set [AERI set: name Z389, 6 scans, 0 angle, D16300 command]
[Ingest 22:05:35 INFO] Sending XML status message
[Status 22:05:35 INFO] Mirror angle: 0
[Mirror 22:05:36 INFO] rotating to position Z
[Status 22:05:36 INFO] .SET file for ACQ96 ready
[Ingest 22:05:37 INFO] Starting acquisition
[Status 22:05:37 INFO] reading housekeeping
[Status 22:05:55 INFO] acquire complete
[Status 22:05:56 INFO] writing housekeeping
[Sequencer 22:05:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:05:56 INFO] incremented Z scene to 389 completed views
[Sequencer 22:05:56 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:05:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:05:56 INFO] incremented to [AERI set: name A390, 6 scans, 120 angle, D28300 command] set
[sigmove 22:05:56 INFO] Z389.SIG(18)
[sigmove 22:05:56 DEBUG] transformed Z389Ma.SPC -> Z389MA.SPC
[sigmove 22:05:56 DEBUG] transformed Z389Mb.SPC -> Z389MB.SPC
[sigmove 22:05:56 DEBUG] transformed Z389Mc.SPC -> Z389MC.SPC
[sigmove 22:05:56 DEBUG] transformed Z389Md.SPC -> Z389MD.SPC
[sigmove 22:05:56 DEBUG] transformed Z389Me.SPC -> Z389ME.SPC
[sigmove 22:05:56 DEBUG] transformed Z389Mf.SPC -> Z389MF.SPC
[Status 22:05:56 INFO] data for Z389 transferred to science data processing
[Tidy 22:05:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:05:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:05:56 INFO] resetting WatchDogTimer
[Status 22:05:56 INFO] Starting Set [AERI set: name A390, 6 scans, 120 angle, D28300 command]
[Ingest 22:05:56 INFO] Sending XML status message
[Status 22:05:56 INFO] Mirror angle: 120
[Mirror 22:05:57 INFO] rotating to position A
[Status 22:05:59 INFO] .SET file for ACQ96 ready
[Ingest 22:05:59 INFO] Starting acquisition
[Status 22:06:00 INFO] reading housekeeping
[Status 22:06:17 INFO] acquire complete
[Status 22:06:18 INFO] writing housekeeping
[Sequencer 22:06:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:06:18 INFO] incremented A scene to 390 completed views
[Sequencer 22:06:18 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:06:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:06:18 INFO] incremented to [AERI set: name H390, 6 scans, 60 angle, D22500 command] set
[sigmove 22:06:18 INFO] A390.SIG(18)
[sigmove 22:06:18 DEBUG] transformed A390Ma.SPC -> A390MA.SPC
[sigmove 22:06:18 DEBUG] transformed A390Mb.SPC -> A390MB.SPC
[sigmove 22:06:18 DEBUG] transformed A390Mc.SPC -> A390MC.SPC
[sigmove 22:06:18 DEBUG] transformed A390Md.SPC -> A390MD.SPC
[sigmove 22:06:18 DEBUG] transformed A390Me.SPC -> A390ME.SPC
[sigmove 22:06:18 DEBUG] transformed A390Mf.SPC -> A390MF.SPC
[Status 22:06:18 INFO] data for A390 transferred to science data processing
[Tidy 22:06:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:06:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:06:18 INFO] resetting WatchDogTimer
[Status 22:06:19 INFO] Starting Set [AERI set: name H390, 6 scans, 60 angle, D22500 command]
[Ingest 22:06:19 INFO] Sending XML status message
[Status 22:06:19 INFO] Mirror angle: 60
[Mirror 22:06:19 INFO] rotating to position H
[Status 22:06:20 INFO] .SET file for ACQ96 ready
[Ingest 22:06:21 INFO] Starting acquisition
[Status 22:06:21 INFO] reading housekeeping
[Status 22:06:38 INFO] acquire complete
[Status 22:06:40 INFO] writing housekeeping
[Sequencer 22:06:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:06:40 INFO] incremented H scene to 390 completed views
[Sequencer 22:06:40 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:06:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:06:40 INFO] incremented to [AERI set: name S390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:06:40 INFO] H390.SIG(18)
[sigmove 22:06:40 DEBUG] transformed H390Ma.SPC -> H390MA.SPC
[sigmove 22:06:40 DEBUG] transformed H390Mb.SPC -> H390MB.SPC
[sigmove 22:06:40 DEBUG] transformed H390Mc.SPC -> H390MC.SPC
[sigmove 22:06:40 DEBUG] transformed H390Md.SPC -> H390MD.SPC
[sigmove 22:06:40 DEBUG] transformed H390Me.SPC -> H390ME.SPC
[sigmove 22:06:40 DEBUG] transformed H390Mf.SPC -> H390MF.SPC
[Status 22:06:40 INFO] data for H390 transferred to science data processing
[Tidy 22:06:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:06:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:06:40 INFO] resetting WatchDogTimer
[Status 22:06:40 INFO] Starting Set [AERI set: name S390, 6 scans, 0 angle, D16300 command]
[Ingest 22:06:40 INFO] Sending XML status message
[Status 22:06:40 INFO] Mirror angle: 0
[Mirror 22:06:41 INFO] rotating to position S
[Status 22:06:42 INFO] .SET file for ACQ96 ready
[Ingest 22:06:42 INFO] Starting acquisition
[Status 22:06:43 INFO] reading housekeeping
[Status 22:07:01 INFO] acquire complete
[Status 22:07:02 INFO] writing housekeeping
[Sequencer 22:07:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:07:02 INFO] incremented S scene to 390 completed views
[Sequencer 22:07:02 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:07:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:07:02 INFO] incremented to [AERI set: name T390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:07:02 INFO] S390.SIG(18)
[sigmove 22:07:02 DEBUG] transformed S390Ma.SPC -> S390MA.SPC
[sigmove 22:07:02 DEBUG] transformed S390Mb.SPC -> S390MB.SPC
[sigmove 22:07:02 DEBUG] transformed S390Mc.SPC -> S390MC.SPC
[sigmove 22:07:02 DEBUG] transformed S390Md.SPC -> S390MD.SPC
[sigmove 22:07:02 DEBUG] transformed S390Me.SPC -> S390ME.SPC
[sigmove 22:07:02 DEBUG] transformed S390Mf.SPC -> S390MF.SPC
[Status 22:07:02 INFO] data for S390 transferred to science data processing
[Tidy 22:07:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:07:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:07:02 INFO] resetting WatchDogTimer
[Status 22:07:03 INFO] Starting Set [AERI set: name T390, 6 scans, 0 angle, D16300 command]
[Ingest 22:07:03 INFO] Sending XML status message
[Status 22:07:03 INFO] Mirror angle: 0
[Mirror 22:07:03 INFO] rotating to position T
[Status 22:07:04 INFO] .SET file for ACQ96 ready
[Ingest 22:07:04 INFO] Starting acquisition
[Status 22:07:05 INFO] reading housekeeping
[Status 22:07:22 INFO] acquire complete
[Status 22:07:23 INFO] writing housekeeping
[Sequencer 22:07:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:07:23 INFO] incremented T scene to 390 completed views
[Sequencer 22:07:23 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:07:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:07:23 INFO] incremented to [AERI set: name U390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:07:23 INFO] T390.SIG(18)
[sigmove 22:07:23 DEBUG] transformed T390Ma.SPC -> T390MA.SPC
[sigmove 22:07:23 DEBUG] transformed T390Mb.SPC -> T390MB.SPC
[sigmove 22:07:23 DEBUG] transformed T390Mc.SPC -> T390MC.SPC
[sigmove 22:07:23 DEBUG] transformed T390Md.SPC -> T390MD.SPC
[sigmove 22:07:23 DEBUG] transformed T390Me.SPC -> T390ME.SPC
[sigmove 22:07:23 DEBUG] transformed T390Mf.SPC -> T390MF.SPC
[Status 22:07:23 INFO] data for T390 transferred to science data processing
[Tidy 22:07:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:07:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:07:23 INFO] resetting WatchDogTimer
[Status 22:07:24 INFO] Starting Set [AERI set: name U390, 6 scans, 0 angle, D16300 command]
[Ingest 22:07:24 INFO] Sending XML status message
[Status 22:07:24 INFO] Mirror angle: 0
[Mirror 22:07:24 INFO] rotating to position U
[Status 22:07:25 INFO] .SET file for ACQ96 ready
[Ingest 22:07:25 INFO] Starting acquisition
[Status 22:07:26 INFO] reading housekeeping
[Status 22:07:44 INFO] acquire complete
[Status 22:07:45 INFO] writing housekeeping
[Sequencer 22:07:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:07:45 INFO] incremented U scene to 390 completed views
[Sequencer 22:07:45 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:07:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:07:45 INFO] incremented to [AERI set: name V390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:07:45 INFO] U390.SIG(18)
[sigmove 22:07:45 DEBUG] transformed U390Ma.SPC -> U390MA.SPC
[sigmove 22:07:45 DEBUG] transformed U390Mb.SPC -> U390MB.SPC
[sigmove 22:07:45 DEBUG] transformed U390Mc.SPC -> U390MC.SPC
[sigmove 22:07:45 DEBUG] transformed U390Md.SPC -> U390MD.SPC
[sigmove 22:07:45 DEBUG] transformed U390Me.SPC -> U390ME.SPC
[sigmove 22:07:45 DEBUG] transformed U390Mf.SPC -> U390MF.SPC
[Status 22:07:45 INFO] data for U390 transferred to science data processing
[Tidy 22:07:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:07:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:07:45 INFO] resetting WatchDogTimer
[Status 22:07:45 INFO] Starting Set [AERI set: name V390, 6 scans, 0 angle, D16300 command]
[Ingest 22:07:45 INFO] Sending XML status message
[Status 22:07:45 INFO] Mirror angle: 0
[Mirror 22:07:46 INFO] rotating to position V
[Status 22:07:46 INFO] .SET file for ACQ96 ready
[Ingest 22:07:47 INFO] Starting acquisition
[Status 22:07:47 INFO] reading housekeeping
[Status 22:08:05 INFO] acquire complete
[Status 22:08:06 INFO] writing housekeeping
[Sequencer 22:08:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:08:06 INFO] incremented V scene to 390 completed views
[Sequencer 22:08:06 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:08:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:08:06 INFO] incremented to [AERI set: name W390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:08:06 INFO] V390.SIG(18)
[sigmove 22:08:06 DEBUG] transformed V390Ma.SPC -> V390MA.SPC
[sigmove 22:08:06 DEBUG] transformed V390Mb.SPC -> V390MB.SPC
[sigmove 22:08:06 DEBUG] transformed V390Mc.SPC -> V390MC.SPC
[sigmove 22:08:06 DEBUG] transformed V390Md.SPC -> V390MD.SPC
[sigmove 22:08:06 DEBUG] transformed V390Me.SPC -> V390ME.SPC
[sigmove 22:08:06 DEBUG] transformed V390Mf.SPC -> V390MF.SPC
[Status 22:08:06 INFO] data for V390 transferred to science data processing
[Tidy 22:08:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:08:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:08:06 INFO] resetting WatchDogTimer
[Status 22:08:07 INFO] Starting Set [AERI set: name W390, 6 scans, 0 angle, D16300 command]
[Ingest 22:08:07 INFO] Sending XML status message
[Status 22:08:07 INFO] Mirror angle: 0
[Mirror 22:08:07 INFO] rotating to position W
[Status 22:08:08 INFO] .SET file for ACQ96 ready
[Ingest 22:08:08 INFO] Starting acquisition
[Status 22:08:09 INFO] reading housekeeping
[Status 22:08:26 INFO] acquire complete
[Status 22:08:27 INFO] writing housekeeping
[Sequencer 22:08:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:08:27 INFO] incremented W scene to 390 completed views
[Sequencer 22:08:27 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:08:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:08:27 INFO] incremented to [AERI set: name X390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:08:27 INFO] W390.SIG(18)
[sigmove 22:08:27 DEBUG] transformed W390Ma.SPC -> W390MA.SPC
[sigmove 22:08:27 DEBUG] transformed W390Mb.SPC -> W390MB.SPC
[sigmove 22:08:27 DEBUG] transformed W390Mc.SPC -> W390MC.SPC
[sigmove 22:08:27 DEBUG] transformed W390Md.SPC -> W390MD.SPC
[sigmove 22:08:27 DEBUG] transformed W390Me.SPC -> W390ME.SPC
[sigmove 22:08:27 DEBUG] transformed W390Mf.SPC -> W390MF.SPC
[Status 22:08:27 INFO] data for W390 transferred to science data processing
[Tidy 22:08:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:08:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:08:27 INFO] resetting WatchDogTimer
[Status 22:08:28 INFO] Starting Set [AERI set: name X390, 6 scans, 0 angle, D16300 command]
[Ingest 22:08:28 INFO] Sending XML status message
[Status 22:08:28 INFO] Mirror angle: 0
[Mirror 22:08:28 INFO] rotating to position X
[Status 22:08:29 INFO] .SET file for ACQ96 ready
[Ingest 22:08:29 INFO] Starting acquisition
[Status 22:08:30 INFO] reading housekeeping
[Status 22:08:47 INFO] acquire complete
[Status 22:08:49 INFO] writing housekeeping
[Sequencer 22:08:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:08:49 INFO] incremented X scene to 390 completed views
[Sequencer 22:08:49 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:08:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:08:49 INFO] incremented to [AERI set: name Y390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:08:49 INFO] X390.SIG(18)
[sigmove 22:08:49 DEBUG] transformed X390Ma.SPC -> X390MA.SPC
[sigmove 22:08:49 DEBUG] transformed X390Mb.SPC -> X390MB.SPC
[sigmove 22:08:49 DEBUG] transformed X390Mc.SPC -> X390MC.SPC
[sigmove 22:08:49 DEBUG] transformed X390Md.SPC -> X390MD.SPC
[sigmove 22:08:49 DEBUG] transformed X390Me.SPC -> X390ME.SPC
[sigmove 22:08:49 DEBUG] transformed X390Mf.SPC -> X390MF.SPC
[Status 22:08:49 INFO] data for X390 transferred to science data processing
[Tidy 22:08:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:08:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:08:49 INFO] resetting WatchDogTimer
[Status 22:08:49 INFO] Starting Set [AERI set: name Y390, 6 scans, 0 angle, D16300 command]
[Ingest 22:08:49 INFO] Sending XML status message
[Status 22:08:49 INFO] Mirror angle: 0
[Mirror 22:08:50 INFO] rotating to position Y
[Status 22:08:50 INFO] .SET file for ACQ96 ready
[Ingest 22:08:51 INFO] Starting acquisition
[Status 22:08:51 INFO] reading housekeeping
[Status 22:09:09 INFO] acquire complete
[Status 22:09:10 INFO] writing housekeeping
[Sequencer 22:09:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:09:10 INFO] incremented Y scene to 390 completed views
[Sequencer 22:09:10 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:09:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:09:10 INFO] incremented to [AERI set: name Z390, 6 scans, 0 angle, D16300 command] set
[sigmove 22:09:10 INFO] Y390.SIG(18)
[sigmove 22:09:10 DEBUG] transformed Y390Ma.SPC -> Y390MA.SPC
[sigmove 22:09:10 DEBUG] transformed Y390Mb.SPC -> Y390MB.SPC
[sigmove 22:09:10 DEBUG] transformed Y390Mc.SPC -> Y390MC.SPC
[sigmove 22:09:10 DEBUG] transformed Y390Md.SPC -> Y390MD.SPC
[sigmove 22:09:10 DEBUG] transformed Y390Me.SPC -> Y390ME.SPC
[sigmove 22:09:10 DEBUG] transformed Y390Mf.SPC -> Y390MF.SPC
[Status 22:09:10 INFO] data for Y390 transferred to science data processing
[Tidy 22:09:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:09:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:09:10 INFO] resetting WatchDogTimer
[Status 22:09:10 INFO] Starting Set [AERI set: name Z390, 6 scans, 0 angle, D16300 command]
[Ingest 22:09:10 INFO] Sending XML status message
[Status 22:09:10 INFO] Mirror angle: 0
[Mirror 22:09:11 INFO] rotating to position Z
[Status 22:09:12 INFO] .SET file for ACQ96 ready
[Ingest 22:09:12 INFO] Starting acquisition
[Status 22:09:13 INFO] reading housekeeping
[Status 22:09:30 INFO] acquire complete
[Status 22:09:31 INFO] writing housekeeping
[Sequencer 22:09:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:09:31 INFO] incremented Z scene to 390 completed views
[Sequencer 22:09:31 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:09:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:09:31 INFO] incremented to [AERI set: name H391, 6 scans, 60 angle, D22500 command] set
[sigmove 22:09:31 INFO] Z390.SIG(18)
[sigmove 22:09:31 DEBUG] transformed Z390Ma.SPC -> Z390MA.SPC
[sigmove 22:09:31 DEBUG] transformed Z390Mb.SPC -> Z390MB.SPC
[sigmove 22:09:31 DEBUG] transformed Z390Mc.SPC -> Z390MC.SPC
[sigmove 22:09:31 DEBUG] transformed Z390Md.SPC -> Z390MD.SPC
[sigmove 22:09:31 DEBUG] transformed Z390Me.SPC -> Z390ME.SPC
[sigmove 22:09:31 DEBUG] transformed Z390Mf.SPC -> Z390MF.SPC
[Status 22:09:31 INFO] data for Z390 transferred to science data processing
[Tidy 22:09:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:09:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:09:31 INFO] resetting WatchDogTimer
[Status 22:09:32 INFO] Starting Set [AERI set: name H391, 6 scans, 60 angle, D22500 command]
[Ingest 22:09:32 INFO] Sending XML status message
[Status 22:09:32 INFO] Mirror angle: 60
[Mirror 22:09:32 INFO] rotating to position H
[Status 22:09:33 INFO] .SET file for ACQ96 ready
[Ingest 22:09:34 INFO] Starting acquisition
[Status 22:09:34 INFO] reading housekeeping
[Status 22:09:52 INFO] acquire complete
[Status 22:09:54 INFO] writing housekeeping
[Sequencer 22:09:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:09:54 INFO] incremented H scene to 391 completed views
[Sequencer 22:09:54 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:09:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:09:54 INFO] incremented to [AERI set: name A391, 6 scans, 120 angle, D28300 command] set
[sigmove 22:09:54 INFO] H391.SIG(18)
[sigmove 22:09:54 DEBUG] transformed H391Ma.SPC -> H391MA.SPC
[sigmove 22:09:54 DEBUG] transformed H391Mb.SPC -> H391MB.SPC
[sigmove 22:09:54 DEBUG] transformed H391Mc.SPC -> H391MC.SPC
[sigmove 22:09:54 DEBUG] transformed H391Md.SPC -> H391MD.SPC
[sigmove 22:09:54 DEBUG] transformed H391Me.SPC -> H391ME.SPC
[sigmove 22:09:54 DEBUG] transformed H391Mf.SPC -> H391MF.SPC
[Status 22:09:54 INFO] data for H391 transferred to science data processing
[Tidy 22:09:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:09:54 INFO] A389.FIN(19),H389.FIN(19),S389.FIN(19),T389.FIN(19),U389.FIN(19),V389.FIN(19),W389.FIN(19),X389.FIN(19),Y389.FIN(19),Z389.FIN(19),A390.FIN(19),H390.FIN(19),S390.FIN(19),T390.FIN(19),U390.FIN(19),V390.FIN(19),W390.FIN(19),X390.FIN(19),Y390.FIN(19),Z390.FIN(19)
[sigmove 22:09:54 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:09:54 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:10:01 DEBUG] done zipping
[WatchDog 22:10:01 INFO] resetting WatchDogTimer
[Status 22:10:02 INFO] Starting Set [AERI set: name A391, 6 scans, 120 angle, D28300 command]
[Ingest 22:10:02 INFO] Sending XML status message
[Status 22:10:02 INFO] Mirror angle: 120
[Mirror 22:10:02 INFO] rotating to position A
[Status 22:10:03 INFO] .SET file for ACQ96 ready
[Ingest 22:10:04 INFO] Starting acquisition
[Status 22:10:04 INFO] reading housekeeping
[Status 22:10:22 INFO] acquire complete
[Status 22:10:23 INFO] writing housekeeping
[Sequencer 22:10:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:10:23 INFO] incremented A scene to 391 completed views
[Sequencer 22:10:23 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:10:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:10:23 INFO] incremented to [AERI set: name S391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:10:23 INFO] A391.SIG(18)
[sigmove 22:10:23 DEBUG] transformed A391Ma.SPC -> A391MA.SPC
[sigmove 22:10:23 DEBUG] transformed A391Mb.SPC -> A391MB.SPC
[sigmove 22:10:23 DEBUG] transformed A391Mc.SPC -> A391MC.SPC
[sigmove 22:10:23 DEBUG] transformed A391Md.SPC -> A391MD.SPC
[sigmove 22:10:23 DEBUG] transformed A391Me.SPC -> A391ME.SPC
[sigmove 22:10:23 DEBUG] transformed A391Mf.SPC -> A391MF.SPC
[Status 22:10:23 INFO] data for A391 transferred to science data processing
[Tidy 22:10:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:10:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:10:23 INFO] resetting WatchDogTimer
[Status 22:10:23 INFO] Starting Set [AERI set: name S391, 6 scans, 0 angle, D16300 command]
[Ingest 22:10:23 INFO] Sending XML status message
[Status 22:10:23 INFO] Mirror angle: 0
[Mirror 22:10:24 INFO] rotating to position S
[Status 22:10:26 INFO] .SET file for ACQ96 ready
[Ingest 22:10:26 INFO] Starting acquisition
[Status 22:10:26 INFO] reading housekeeping
[Status 22:10:44 INFO] acquire complete
[Status 22:10:45 INFO] writing housekeeping
[Sequencer 22:10:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:10:45 INFO] incremented S scene to 391 completed views
[Sequencer 22:10:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:10:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:10:45 INFO] incremented to [AERI set: name T391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:10:45 INFO] S391.SIG(18)
[sigmove 22:10:45 DEBUG] transformed S391Ma.SPC -> S391MA.SPC
[sigmove 22:10:45 DEBUG] transformed S391Mb.SPC -> S391MB.SPC
[sigmove 22:10:45 DEBUG] transformed S391Mc.SPC -> S391MC.SPC
[sigmove 22:10:45 DEBUG] transformed S391Md.SPC -> S391MD.SPC
[sigmove 22:10:45 DEBUG] transformed S391Me.SPC -> S391ME.SPC
[sigmove 22:10:45 DEBUG] transformed S391Mf.SPC -> S391MF.SPC
[Status 22:10:45 INFO] data for S391 transferred to science data processing
[Tidy 22:10:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:10:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:10:45 INFO] resetting WatchDogTimer
[Status 22:10:46 INFO] Starting Set [AERI set: name T391, 6 scans, 0 angle, D16300 command]
[Ingest 22:10:46 INFO] Sending XML status message
[Status 22:10:46 INFO] Mirror angle: 0
[Mirror 22:10:46 INFO] rotating to position T
[Status 22:10:47 INFO] .SET file for ACQ96 ready
[Ingest 22:10:47 INFO] Starting acquisition
[Status 22:10:48 INFO] reading housekeeping
[Status 22:11:05 INFO] acquire complete
[Status 22:11:07 INFO] writing housekeeping
[Sequencer 22:11:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:11:07 INFO] incremented T scene to 391 completed views
[Sequencer 22:11:07 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:11:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:11:07 INFO] incremented to [AERI set: name U391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:11:07 INFO] T391.SIG(18)
[sigmove 22:11:07 DEBUG] transformed T391Ma.SPC -> T391MA.SPC
[sigmove 22:11:07 DEBUG] transformed T391Mb.SPC -> T391MB.SPC
[sigmove 22:11:07 DEBUG] transformed T391Mc.SPC -> T391MC.SPC
[sigmove 22:11:07 DEBUG] transformed T391Md.SPC -> T391MD.SPC
[sigmove 22:11:07 DEBUG] transformed T391Me.SPC -> T391ME.SPC
[sigmove 22:11:07 DEBUG] transformed T391Mf.SPC -> T391MF.SPC
[Status 22:11:07 INFO] data for T391 transferred to science data processing
[Tidy 22:11:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:11:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:11:07 INFO] resetting WatchDogTimer
[Status 22:11:07 INFO] Starting Set [AERI set: name U391, 6 scans, 0 angle, D16300 command]
[Ingest 22:11:07 INFO] Sending XML status message
[Status 22:11:07 INFO] Mirror angle: 0
[Mirror 22:11:08 INFO] rotating to position U
[Status 22:11:08 INFO] .SET file for ACQ96 ready
[Ingest 22:11:09 INFO] Starting acquisition
[Status 22:11:09 INFO] reading housekeeping
[Status 22:11:27 INFO] acquire complete
[Status 22:11:28 INFO] writing housekeeping
[Sequencer 22:11:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:11:28 INFO] incremented U scene to 391 completed views
[Sequencer 22:11:28 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:11:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:11:28 INFO] incremented to [AERI set: name V391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:11:28 INFO] U391.SIG(18)
[sigmove 22:11:28 DEBUG] transformed U391Ma.SPC -> U391MA.SPC
[sigmove 22:11:28 DEBUG] transformed U391Mb.SPC -> U391MB.SPC
[sigmove 22:11:28 DEBUG] transformed U391Mc.SPC -> U391MC.SPC
[sigmove 22:11:28 DEBUG] transformed U391Md.SPC -> U391MD.SPC
[sigmove 22:11:28 DEBUG] transformed U391Me.SPC -> U391ME.SPC
[sigmove 22:11:28 DEBUG] transformed U391Mf.SPC -> U391MF.SPC
[Status 22:11:28 INFO] data for U391 transferred to science data processing
[Tidy 22:11:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:11:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:11:28 INFO] resetting WatchDogTimer
[Status 22:11:28 INFO] Starting Set [AERI set: name V391, 6 scans, 0 angle, D16300 command]
[Ingest 22:11:28 INFO] Sending XML status message
[Status 22:11:28 INFO] Mirror angle: 0
[Mirror 22:11:29 INFO] rotating to position V
[Status 22:11:30 INFO] .SET file for ACQ96 ready
[Ingest 22:11:30 INFO] Starting acquisition
[Status 22:11:31 INFO] reading housekeeping
[Status 22:11:48 INFO] acquire complete
[Status 22:11:49 INFO] writing housekeeping
[Sequencer 22:11:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:11:49 INFO] incremented V scene to 391 completed views
[Sequencer 22:11:49 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:11:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:11:49 INFO] incremented to [AERI set: name W391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:11:49 INFO] V391.SIG(18)
[sigmove 22:11:49 DEBUG] transformed V391Ma.SPC -> V391MA.SPC
[sigmove 22:11:49 DEBUG] transformed V391Mb.SPC -> V391MB.SPC
[sigmove 22:11:49 DEBUG] transformed V391Mc.SPC -> V391MC.SPC
[sigmove 22:11:49 DEBUG] transformed V391Md.SPC -> V391MD.SPC
[sigmove 22:11:49 DEBUG] transformed V391Me.SPC -> V391ME.SPC
[sigmove 22:11:49 DEBUG] transformed V391Mf.SPC -> V391MF.SPC
[Status 22:11:49 INFO] data for V391 transferred to science data processing
[Tidy 22:11:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:11:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:11:49 INFO] resetting WatchDogTimer
[Status 22:11:50 INFO] Starting Set [AERI set: name W391, 6 scans, 0 angle, D16300 command]
[Ingest 22:11:50 INFO] Sending XML status message
[Status 22:11:50 INFO] Mirror angle: 0
[Mirror 22:11:50 INFO] rotating to position W
[Status 22:11:51 INFO] .SET file for ACQ96 ready
[Ingest 22:11:51 INFO] Starting acquisition
[Status 22:11:52 INFO] reading housekeeping
[Status 22:12:09 INFO] acquire complete
[Status 22:12:11 INFO] writing housekeeping
[Sequencer 22:12:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:12:11 INFO] incremented W scene to 391 completed views
[Sequencer 22:12:11 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:12:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:12:11 INFO] incremented to [AERI set: name X391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:12:11 INFO] W391.SIG(18)
[sigmove 22:12:11 DEBUG] transformed W391Ma.SPC -> W391MA.SPC
[sigmove 22:12:11 DEBUG] transformed W391Mb.SPC -> W391MB.SPC
[sigmove 22:12:11 DEBUG] transformed W391Mc.SPC -> W391MC.SPC
[sigmove 22:12:11 DEBUG] transformed W391Md.SPC -> W391MD.SPC
[sigmove 22:12:11 DEBUG] transformed W391Me.SPC -> W391ME.SPC
[sigmove 22:12:11 DEBUG] transformed W391Mf.SPC -> W391MF.SPC
[Status 22:12:11 INFO] data for W391 transferred to science data processing
[Tidy 22:12:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:12:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:12:11 INFO] resetting WatchDogTimer
[Status 22:12:11 INFO] Starting Set [AERI set: name X391, 6 scans, 0 angle, D16300 command]
[Ingest 22:12:11 INFO] Sending XML status message
[Status 22:12:11 INFO] Mirror angle: 0
[Mirror 22:12:12 INFO] rotating to position X
[Status 22:12:12 INFO] .SET file for ACQ96 ready
[Ingest 22:12:13 INFO] Starting acquisition
[Status 22:12:13 INFO] reading housekeeping
[Status 22:12:31 INFO] acquire complete
[Status 22:12:32 INFO] writing housekeeping
[Sequencer 22:12:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:12:32 INFO] incremented X scene to 391 completed views
[Sequencer 22:12:32 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:12:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:12:32 INFO] incremented to [AERI set: name Y391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:12:32 INFO] X391.SIG(18)
[sigmove 22:12:32 DEBUG] transformed X391Ma.SPC -> X391MA.SPC
[sigmove 22:12:32 DEBUG] transformed X391Mb.SPC -> X391MB.SPC
[sigmove 22:12:32 DEBUG] transformed X391Mc.SPC -> X391MC.SPC
[sigmove 22:12:32 DEBUG] transformed X391Md.SPC -> X391MD.SPC
[sigmove 22:12:32 DEBUG] transformed X391Me.SPC -> X391ME.SPC
[sigmove 22:12:32 DEBUG] transformed X391Mf.SPC -> X391MF.SPC
[Status 22:12:32 INFO] data for X391 transferred to science data processing
[Tidy 22:12:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:12:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:12:32 INFO] resetting WatchDogTimer
[Status 22:12:32 INFO] Starting Set [AERI set: name Y391, 6 scans, 0 angle, D16300 command]
[Ingest 22:12:32 INFO] Sending XML status message
[Status 22:12:32 INFO] Mirror angle: 0
[Mirror 22:12:33 INFO] rotating to position Y
[Status 22:12:33 INFO] .SET file for ACQ96 ready
[Ingest 22:12:34 INFO] Starting acquisition
[Status 22:12:34 INFO] reading housekeeping
[Status 22:12:52 INFO] acquire complete
[Status 22:12:53 INFO] writing housekeeping
[Sequencer 22:12:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:12:53 INFO] incremented Y scene to 391 completed views
[Sequencer 22:12:53 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:12:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:12:53 INFO] incremented to [AERI set: name Z391, 6 scans, 0 angle, D16300 command] set
[sigmove 22:12:53 INFO] Y391.SIG(18)
[sigmove 22:12:53 DEBUG] transformed Y391Ma.SPC -> Y391MA.SPC
[sigmove 22:12:53 DEBUG] transformed Y391Mb.SPC -> Y391MB.SPC
[sigmove 22:12:53 DEBUG] transformed Y391Mc.SPC -> Y391MC.SPC
[sigmove 22:12:53 DEBUG] transformed Y391Md.SPC -> Y391MD.SPC
[sigmove 22:12:53 DEBUG] transformed Y391Me.SPC -> Y391ME.SPC
[sigmove 22:12:53 DEBUG] transformed Y391Mf.SPC -> Y391MF.SPC
[Status 22:12:53 INFO] data for Y391 transferred to science data processing
[Tidy 22:12:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:12:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:12:53 INFO] resetting WatchDogTimer
[Status 22:12:54 INFO] Starting Set [AERI set: name Z391, 6 scans, 0 angle, D16300 command]
[Ingest 22:12:54 INFO] Sending XML status message
[Status 22:12:54 INFO] Mirror angle: 0
[Mirror 22:12:54 INFO] rotating to position Z
[Status 22:12:55 INFO] .SET file for ACQ96 ready
[Ingest 22:12:55 INFO] Starting acquisition
[Status 22:12:56 INFO] reading housekeeping
[Status 22:13:13 INFO] acquire complete
[Status 22:13:15 INFO] writing housekeeping
[Sequencer 22:13:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:13:15 INFO] incremented Z scene to 391 completed views
[Sequencer 22:13:15 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:13:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:13:15 INFO] incremented to [AERI set: name A392, 6 scans, 120 angle, D28300 command] set
[sigmove 22:13:15 INFO] Z391.SIG(18)
[sigmove 22:13:15 DEBUG] transformed Z391Ma.SPC -> Z391MA.SPC
[sigmove 22:13:15 DEBUG] transformed Z391Mb.SPC -> Z391MB.SPC
[sigmove 22:13:15 DEBUG] transformed Z391Mc.SPC -> Z391MC.SPC
[sigmove 22:13:15 DEBUG] transformed Z391Md.SPC -> Z391MD.SPC
[sigmove 22:13:15 DEBUG] transformed Z391Me.SPC -> Z391ME.SPC
[sigmove 22:13:15 DEBUG] transformed Z391Mf.SPC -> Z391MF.SPC
[Status 22:13:15 INFO] data for Z391 transferred to science data processing
[Tidy 22:13:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:13:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:13:15 INFO] resetting WatchDogTimer
[Status 22:13:15 INFO] Starting Set [AERI set: name A392, 6 scans, 120 angle, D28300 command]
[Ingest 22:13:15 INFO] Sending XML status message
[Status 22:13:15 INFO] Mirror angle: 120
[Mirror 22:13:15 INFO] rotating to position A
[Status 22:13:17 INFO] .SET file for ACQ96 ready
[Ingest 22:13:18 INFO] Starting acquisition
[Status 22:13:18 INFO] reading housekeeping
[Status 22:13:36 INFO] acquire complete
[Status 22:13:37 INFO] writing housekeeping
[Sequencer 22:13:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:13:37 INFO] incremented A scene to 392 completed views
[Sequencer 22:13:37 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:13:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:13:37 INFO] incremented to [AERI set: name H392, 6 scans, 60 angle, D22500 command] set
[sigmove 22:13:37 INFO] A392.SIG(18)
[sigmove 22:13:37 DEBUG] transformed A392Ma.SPC -> A392MA.SPC
[sigmove 22:13:37 DEBUG] transformed A392Mb.SPC -> A392MB.SPC
[sigmove 22:13:37 DEBUG] transformed A392Mc.SPC -> A392MC.SPC
[sigmove 22:13:37 DEBUG] transformed A392Md.SPC -> A392MD.SPC
[sigmove 22:13:37 DEBUG] transformed A392Me.SPC -> A392ME.SPC
[sigmove 22:13:37 DEBUG] transformed A392Mf.SPC -> A392MF.SPC
[Status 22:13:37 INFO] data for A392 transferred to science data processing
[Tidy 22:13:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:13:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:13:37 INFO] resetting WatchDogTimer
[Status 22:13:37 INFO] Starting Set [AERI set: name H392, 6 scans, 60 angle, D22500 command]
[Ingest 22:13:37 INFO] Sending XML status message
[Status 22:13:37 INFO] Mirror angle: 60
[Mirror 22:13:38 INFO] rotating to position H
[Status 22:13:39 INFO] .SET file for ACQ96 ready
[Ingest 22:13:39 INFO] Starting acquisition
[Status 22:13:40 INFO] reading housekeeping
[Status 22:13:58 INFO] acquire complete
[Status 22:13:59 INFO] writing housekeeping
[Sequencer 22:13:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:13:59 INFO] incremented H scene to 392 completed views
[Sequencer 22:13:59 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:13:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:13:59 INFO] incremented to [AERI set: name S392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:13:59 INFO] H392.SIG(18)
[sigmove 22:13:59 DEBUG] transformed H392Ma.SPC -> H392MA.SPC
[sigmove 22:13:59 DEBUG] transformed H392Mb.SPC -> H392MB.SPC
[sigmove 22:13:59 DEBUG] transformed H392Mc.SPC -> H392MC.SPC
[sigmove 22:13:59 DEBUG] transformed H392Md.SPC -> H392MD.SPC
[sigmove 22:13:59 DEBUG] transformed H392Me.SPC -> H392ME.SPC
[sigmove 22:13:59 DEBUG] transformed H392Mf.SPC -> H392MF.SPC
[Status 22:13:59 INFO] data for H392 transferred to science data processing
[Tidy 22:13:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:13:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:13:59 INFO] resetting WatchDogTimer
[Status 22:14:00 INFO] Starting Set [AERI set: name S392, 6 scans, 0 angle, D16300 command]
[Ingest 22:14:00 INFO] Sending XML status message
[Status 22:14:00 INFO] Mirror angle: 0
[Mirror 22:14:00 INFO] rotating to position S
[Status 22:14:02 INFO] .SET file for ACQ96 ready
[Ingest 22:14:02 INFO] Starting acquisition
[Status 22:14:03 INFO] reading housekeeping
[Status 22:14:21 INFO] acquire complete
[Status 22:14:22 INFO] writing housekeeping
[Sequencer 22:14:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:14:22 INFO] incremented S scene to 392 completed views
[Sequencer 22:14:22 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:14:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:14:22 INFO] incremented to [AERI set: name T392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:14:22 INFO] S392.SIG(18)
[sigmove 22:14:22 DEBUG] transformed S392Ma.SPC -> S392MA.SPC
[sigmove 22:14:22 DEBUG] transformed S392Mb.SPC -> S392MB.SPC
[sigmove 22:14:22 DEBUG] transformed S392Mc.SPC -> S392MC.SPC
[sigmove 22:14:22 DEBUG] transformed S392Md.SPC -> S392MD.SPC
[sigmove 22:14:22 DEBUG] transformed S392Me.SPC -> S392ME.SPC
[sigmove 22:14:22 DEBUG] transformed S392Mf.SPC -> S392MF.SPC
[Status 22:14:22 INFO] data for S392 transferred to science data processing
[Tidy 22:14:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:14:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:14:22 INFO] resetting WatchDogTimer
[Status 22:14:22 INFO] Starting Set [AERI set: name T392, 6 scans, 0 angle, D16300 command]
[Ingest 22:14:22 INFO] Sending XML status message
[Status 22:14:22 INFO] Mirror angle: 0
[Mirror 22:14:23 INFO] rotating to position T
[Status 22:14:23 INFO] .SET file for ACQ96 ready
[Ingest 22:14:24 INFO] Starting acquisition
[Status 22:14:24 INFO] reading housekeeping
[Status 22:14:42 INFO] acquire complete
[Status 22:14:43 INFO] writing housekeeping
[Sequencer 22:14:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:14:43 INFO] incremented T scene to 392 completed views
[Sequencer 22:14:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:14:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:14:43 INFO] incremented to [AERI set: name U392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:14:43 INFO] T392.SIG(18)
[sigmove 22:14:43 DEBUG] transformed T392Ma.SPC -> T392MA.SPC
[sigmove 22:14:43 DEBUG] transformed T392Mb.SPC -> T392MB.SPC
[sigmove 22:14:43 DEBUG] transformed T392Mc.SPC -> T392MC.SPC
[sigmove 22:14:43 DEBUG] transformed T392Md.SPC -> T392MD.SPC
[sigmove 22:14:43 DEBUG] transformed T392Me.SPC -> T392ME.SPC
[sigmove 22:14:43 DEBUG] transformed T392Mf.SPC -> T392MF.SPC
[Status 22:14:43 INFO] data for T392 transferred to science data processing
[Tidy 22:14:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:14:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:14:43 INFO] resetting WatchDogTimer
[Status 22:14:44 INFO] Starting Set [AERI set: name U392, 6 scans, 0 angle, D16300 command]
[Ingest 22:14:44 INFO] Sending XML status message
[Status 22:14:44 INFO] Mirror angle: 0
[Mirror 22:14:44 INFO] rotating to position U
[Status 22:14:45 INFO] .SET file for ACQ96 ready
[Ingest 22:14:45 INFO] Starting acquisition
[Status 22:14:46 INFO] reading housekeeping
[Status 22:15:03 INFO] acquire complete
[Status 22:15:04 INFO] writing housekeeping
[Sequencer 22:15:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:15:04 INFO] incremented U scene to 392 completed views
[Sequencer 22:15:04 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:15:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:15:04 INFO] incremented to [AERI set: name V392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:15:04 INFO] U392.SIG(18)
[sigmove 22:15:04 DEBUG] transformed U392Ma.SPC -> U392MA.SPC
[sigmove 22:15:04 DEBUG] transformed U392Mb.SPC -> U392MB.SPC
[sigmove 22:15:04 DEBUG] transformed U392Mc.SPC -> U392MC.SPC
[sigmove 22:15:04 DEBUG] transformed U392Md.SPC -> U392MD.SPC
[sigmove 22:15:04 DEBUG] transformed U392Me.SPC -> U392ME.SPC
[sigmove 22:15:04 DEBUG] transformed U392Mf.SPC -> U392MF.SPC
[Status 22:15:04 INFO] data for U392 transferred to science data processing
[Tidy 22:15:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:15:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:15:04 INFO] resetting WatchDogTimer
[Status 22:15:05 INFO] Starting Set [AERI set: name V392, 6 scans, 0 angle, D16300 command]
[Ingest 22:15:05 INFO] Sending XML status message
[Status 22:15:05 INFO] Mirror angle: 0
[Mirror 22:15:05 INFO] rotating to position V
[Status 22:15:06 INFO] .SET file for ACQ96 ready
[Ingest 22:15:06 INFO] Starting acquisition
[Status 22:15:07 INFO] reading housekeeping
[Status 22:15:24 INFO] acquire complete
[Status 22:15:26 INFO] writing housekeeping
[Sequencer 22:15:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:15:26 INFO] incremented V scene to 392 completed views
[Sequencer 22:15:26 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:15:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:15:26 INFO] incremented to [AERI set: name W392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:15:26 INFO] V392.SIG(18)
[sigmove 22:15:26 DEBUG] transformed V392Ma.SPC -> V392MA.SPC
[sigmove 22:15:26 DEBUG] transformed V392Mb.SPC -> V392MB.SPC
[sigmove 22:15:26 DEBUG] transformed V392Mc.SPC -> V392MC.SPC
[sigmove 22:15:26 DEBUG] transformed V392Md.SPC -> V392MD.SPC
[sigmove 22:15:26 DEBUG] transformed V392Me.SPC -> V392ME.SPC
[sigmove 22:15:26 DEBUG] transformed V392Mf.SPC -> V392MF.SPC
[Status 22:15:26 INFO] data for V392 transferred to science data processing
[Tidy 22:15:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:15:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:15:26 INFO] resetting WatchDogTimer
[Status 22:15:26 INFO] Starting Set [AERI set: name W392, 6 scans, 0 angle, D16300 command]
[Ingest 22:15:26 INFO] Sending XML status message
[Status 22:15:26 INFO] Mirror angle: 0
[Mirror 22:15:27 INFO] rotating to position W
[Status 22:15:27 INFO] .SET file for ACQ96 ready
[Ingest 22:15:28 INFO] Starting acquisition
[Status 22:15:28 INFO] reading housekeeping
[Status 22:15:46 INFO] acquire complete
[Status 22:15:47 INFO] writing housekeeping
[Sequencer 22:15:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:15:47 INFO] incremented W scene to 392 completed views
[Sequencer 22:15:47 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:15:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:15:47 INFO] incremented to [AERI set: name X392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:15:47 INFO] W392.SIG(18)
[sigmove 22:15:47 DEBUG] transformed W392Ma.SPC -> W392MA.SPC
[sigmove 22:15:47 DEBUG] transformed W392Mb.SPC -> W392MB.SPC
[sigmove 22:15:47 DEBUG] transformed W392Mc.SPC -> W392MC.SPC
[sigmove 22:15:47 DEBUG] transformed W392Md.SPC -> W392MD.SPC
[sigmove 22:15:47 DEBUG] transformed W392Me.SPC -> W392ME.SPC
[sigmove 22:15:47 DEBUG] transformed W392Mf.SPC -> W392MF.SPC
[Status 22:15:47 INFO] data for W392 transferred to science data processing
[Tidy 22:15:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:15:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:15:47 INFO] resetting WatchDogTimer
[Status 22:15:47 INFO] Starting Set [AERI set: name X392, 6 scans, 0 angle, D16300 command]
[Ingest 22:15:47 INFO] Sending XML status message
[Status 22:15:47 INFO] Mirror angle: 0
[Mirror 22:15:48 INFO] rotating to position X
[Status 22:15:49 INFO] .SET file for ACQ96 ready
[Ingest 22:15:49 INFO] Starting acquisition
[Status 22:15:49 INFO] reading housekeeping
[Status 22:16:07 INFO] acquire complete
[Status 22:16:08 INFO] writing housekeeping
[Sequencer 22:16:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:16:08 INFO] incremented X scene to 392 completed views
[Sequencer 22:16:08 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:16:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:16:08 INFO] incremented to [AERI set: name Y392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:16:08 INFO] X392.SIG(18)
[sigmove 22:16:08 DEBUG] transformed X392Ma.SPC -> X392MA.SPC
[sigmove 22:16:08 DEBUG] transformed X392Mb.SPC -> X392MB.SPC
[sigmove 22:16:08 DEBUG] transformed X392Mc.SPC -> X392MC.SPC
[sigmove 22:16:08 DEBUG] transformed X392Md.SPC -> X392MD.SPC
[sigmove 22:16:08 DEBUG] transformed X392Me.SPC -> X392ME.SPC
[sigmove 22:16:08 DEBUG] transformed X392Mf.SPC -> X392MF.SPC
[Status 22:16:08 INFO] data for X392 transferred to science data processing
[Tidy 22:16:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:16:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:16:08 INFO] resetting WatchDogTimer
[Status 22:16:09 INFO] Starting Set [AERI set: name Y392, 6 scans, 0 angle, D16300 command]
[Ingest 22:16:09 INFO] Sending XML status message
[Status 22:16:09 INFO] Mirror angle: 0
[Mirror 22:16:09 INFO] rotating to position Y
[Status 22:16:10 INFO] .SET file for ACQ96 ready
[Ingest 22:16:10 INFO] Starting acquisition
[Status 22:16:11 INFO] reading housekeeping
[Status 22:16:28 INFO] acquire complete
[Status 22:16:30 INFO] writing housekeeping
[Sequencer 22:16:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:16:30 INFO] incremented Y scene to 392 completed views
[Sequencer 22:16:30 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:16:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:16:30 INFO] incremented to [AERI set: name Z392, 6 scans, 0 angle, D16300 command] set
[sigmove 22:16:30 INFO] Y392.SIG(18)
[sigmove 22:16:30 DEBUG] transformed Y392Ma.SPC -> Y392MA.SPC
[sigmove 22:16:30 DEBUG] transformed Y392Mb.SPC -> Y392MB.SPC
[sigmove 22:16:30 DEBUG] transformed Y392Mc.SPC -> Y392MC.SPC
[sigmove 22:16:30 DEBUG] transformed Y392Md.SPC -> Y392MD.SPC
[sigmove 22:16:30 DEBUG] transformed Y392Me.SPC -> Y392ME.SPC
[sigmove 22:16:30 DEBUG] transformed Y392Mf.SPC -> Y392MF.SPC
[Status 22:16:30 INFO] data for Y392 transferred to science data processing
[Tidy 22:16:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:16:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:16:30 INFO] resetting WatchDogTimer
[Status 22:16:30 INFO] Starting Set [AERI set: name Z392, 6 scans, 0 angle, D16300 command]
[Ingest 22:16:30 INFO] Sending XML status message
[Status 22:16:30 INFO] Mirror angle: 0
[Mirror 22:16:31 INFO] rotating to position Z
[Status 22:16:31 INFO] .SET file for ACQ96 ready
[Ingest 22:16:32 INFO] Starting acquisition
[Status 22:16:32 INFO] reading housekeeping
[Status 22:16:50 INFO] acquire complete
[Status 22:16:51 INFO] writing housekeeping
[Sequencer 22:16:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:16:51 INFO] incremented Z scene to 392 completed views
[Sequencer 22:16:51 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:16:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:16:51 INFO] incremented to [AERI set: name H393, 6 scans, 60 angle, D22500 command] set
[sigmove 22:16:51 INFO] Z392.SIG(18)
[sigmove 22:16:51 DEBUG] transformed Z392Ma.SPC -> Z392MA.SPC
[sigmove 22:16:51 DEBUG] transformed Z392Mb.SPC -> Z392MB.SPC
[sigmove 22:16:51 DEBUG] transformed Z392Mc.SPC -> Z392MC.SPC
[sigmove 22:16:51 DEBUG] transformed Z392Md.SPC -> Z392MD.SPC
[sigmove 22:16:51 DEBUG] transformed Z392Me.SPC -> Z392ME.SPC
[sigmove 22:16:51 DEBUG] transformed Z392Mf.SPC -> Z392MF.SPC
[Status 22:16:51 INFO] data for Z392 transferred to science data processing
[Tidy 22:16:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:16:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:16:51 INFO] resetting WatchDogTimer
[Status 22:16:51 INFO] Starting Set [AERI set: name H393, 6 scans, 60 angle, D22500 command]
[Ingest 22:16:51 INFO] Sending XML status message
[Status 22:16:51 INFO] Mirror angle: 60
[Mirror 22:16:52 INFO] rotating to position H
[Status 22:16:53 INFO] .SET file for ACQ96 ready
[Ingest 22:16:53 INFO] Starting acquisition
[Status 22:16:54 INFO] reading housekeeping
[Status 22:17:12 INFO] acquire complete
[Status 22:17:13 INFO] writing housekeeping
[Sequencer 22:17:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:17:13 INFO] incremented H scene to 393 completed views
[Sequencer 22:17:13 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:17:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:17:13 INFO] incremented to [AERI set: name A393, 6 scans, 120 angle, D28300 command] set
[sigmove 22:17:13 INFO] H393.SIG(18)
[sigmove 22:17:13 DEBUG] transformed H393Ma.SPC -> H393MA.SPC
[sigmove 22:17:13 DEBUG] transformed H393Mb.SPC -> H393MB.SPC
[sigmove 22:17:13 DEBUG] transformed H393Mc.SPC -> H393MC.SPC
[sigmove 22:17:13 DEBUG] transformed H393Md.SPC -> H393MD.SPC
[sigmove 22:17:13 DEBUG] transformed H393Me.SPC -> H393ME.SPC
[sigmove 22:17:13 DEBUG] transformed H393Mf.SPC -> H393MF.SPC
[Status 22:17:13 INFO] data for H393 transferred to science data processing
[Tidy 22:17:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:17:13 INFO] A391.FIN(19),H391.FIN(19),S391.FIN(19),T391.FIN(19),U391.FIN(19),V391.FIN(19),W391.FIN(19),X391.FIN(19),Y391.FIN(19),Z391.FIN(19),A392.FIN(19),H392.FIN(19),S392.FIN(19),T392.FIN(19),U392.FIN(19),V392.FIN(19),W392.FIN(19),X392.FIN(19),Y392.FIN(19),Z392.FIN(19)
[sigmove 22:17:13 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:17:13 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:17:20 DEBUG] done zipping
[WatchDog 22:17:21 INFO] resetting WatchDogTimer
[Status 22:17:21 INFO] Starting Set [AERI set: name A393, 6 scans, 120 angle, D28300 command]
[Ingest 22:17:21 INFO] Sending XML status message
[Status 22:17:21 INFO] Mirror angle: 120
[Mirror 22:17:22 INFO] rotating to position A
[Status 22:17:23 INFO] .SET file for ACQ96 ready
[Ingest 22:17:23 INFO] Starting acquisition
[Status 22:17:24 INFO] reading housekeeping
[Status 22:17:41 INFO] acquire complete
[Status 22:17:43 INFO] writing housekeeping
[Sequencer 22:17:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:17:43 INFO] incremented A scene to 393 completed views
[Sequencer 22:17:43 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:17:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:17:43 INFO] incremented to [AERI set: name S393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:17:43 INFO] A393.SIG(18)
[sigmove 22:17:43 DEBUG] transformed A393Ma.SPC -> A393MA.SPC
[sigmove 22:17:43 DEBUG] transformed A393Mb.SPC -> A393MB.SPC
[sigmove 22:17:43 DEBUG] transformed A393Mc.SPC -> A393MC.SPC
[sigmove 22:17:43 DEBUG] transformed A393Md.SPC -> A393MD.SPC
[sigmove 22:17:43 DEBUG] transformed A393Me.SPC -> A393ME.SPC
[sigmove 22:17:43 DEBUG] transformed A393Mf.SPC -> A393MF.SPC
[Status 22:17:43 INFO] data for A393 transferred to science data processing
[Tidy 22:17:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:17:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:17:43 INFO] resetting WatchDogTimer
[Status 22:17:43 INFO] Starting Set [AERI set: name S393, 6 scans, 0 angle, D16300 command]
[Ingest 22:17:43 INFO] Sending XML status message
[Status 22:17:43 INFO] Mirror angle: 0
[Mirror 22:17:44 INFO] rotating to position S
[Status 22:17:45 INFO] .SET file for ACQ96 ready
[Ingest 22:17:46 INFO] Starting acquisition
[Status 22:17:46 INFO] reading housekeeping
[Status 22:18:04 INFO] acquire complete
[Status 22:18:05 INFO] writing housekeeping
[Sequencer 22:18:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:18:05 INFO] incremented S scene to 393 completed views
[Sequencer 22:18:05 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:18:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:18:05 INFO] incremented to [AERI set: name T393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:18:05 INFO] S393.SIG(18)
[sigmove 22:18:05 DEBUG] transformed S393Ma.SPC -> S393MA.SPC
[sigmove 22:18:05 DEBUG] transformed S393Mb.SPC -> S393MB.SPC
[sigmove 22:18:05 DEBUG] transformed S393Mc.SPC -> S393MC.SPC
[sigmove 22:18:05 DEBUG] transformed S393Md.SPC -> S393MD.SPC
[sigmove 22:18:05 DEBUG] transformed S393Me.SPC -> S393ME.SPC
[sigmove 22:18:05 DEBUG] transformed S393Mf.SPC -> S393MF.SPC
[Status 22:18:05 INFO] data for S393 transferred to science data processing
[Tidy 22:18:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:18:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:18:05 INFO] resetting WatchDogTimer
[Status 22:18:05 INFO] Starting Set [AERI set: name T393, 6 scans, 0 angle, D16300 command]
[Ingest 22:18:05 INFO] Sending XML status message
[Status 22:18:05 INFO] Mirror angle: 0
[Mirror 22:18:06 INFO] rotating to position T
[Status 22:18:07 INFO] .SET file for ACQ96 ready
[Ingest 22:18:07 INFO] Starting acquisition
[Status 22:18:08 INFO] reading housekeeping
[Status 22:18:25 INFO] acquire complete
[Status 22:18:26 INFO] writing housekeeping
[Sequencer 22:18:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:18:26 INFO] incremented T scene to 393 completed views
[Sequencer 22:18:26 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:18:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:18:26 INFO] incremented to [AERI set: name U393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:18:26 INFO] T393.SIG(18)
[sigmove 22:18:26 DEBUG] transformed T393Ma.SPC -> T393MA.SPC
[sigmove 22:18:26 DEBUG] transformed T393Mb.SPC -> T393MB.SPC
[sigmove 22:18:26 DEBUG] transformed T393Mc.SPC -> T393MC.SPC
[sigmove 22:18:26 DEBUG] transformed T393Md.SPC -> T393MD.SPC
[sigmove 22:18:26 DEBUG] transformed T393Me.SPC -> T393ME.SPC
[sigmove 22:18:26 DEBUG] transformed T393Mf.SPC -> T393MF.SPC
[Status 22:18:26 INFO] data for T393 transferred to science data processing
[Tidy 22:18:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:18:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:18:26 INFO] resetting WatchDogTimer
[Status 22:18:27 INFO] Starting Set [AERI set: name U393, 6 scans, 0 angle, D16300 command]
[Ingest 22:18:27 INFO] Sending XML status message
[Status 22:18:27 INFO] Mirror angle: 0
[Mirror 22:18:27 INFO] rotating to position U
[Status 22:18:28 INFO] .SET file for ACQ96 ready
[Ingest 22:18:28 INFO] Starting acquisition
[Status 22:18:29 INFO] reading housekeeping
[Status 22:18:46 INFO] acquire complete
[Status 22:18:48 INFO] writing housekeeping
[Sequencer 22:18:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:18:48 INFO] incremented U scene to 393 completed views
[Sequencer 22:18:48 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:18:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:18:48 INFO] incremented to [AERI set: name V393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:18:48 INFO] U393.SIG(18)
[sigmove 22:18:48 DEBUG] transformed U393Ma.SPC -> U393MA.SPC
[sigmove 22:18:48 DEBUG] transformed U393Mb.SPC -> U393MB.SPC
[sigmove 22:18:48 DEBUG] transformed U393Mc.SPC -> U393MC.SPC
[sigmove 22:18:48 DEBUG] transformed U393Md.SPC -> U393MD.SPC
[sigmove 22:18:48 DEBUG] transformed U393Me.SPC -> U393ME.SPC
[sigmove 22:18:48 DEBUG] transformed U393Mf.SPC -> U393MF.SPC
[Status 22:18:48 INFO] data for U393 transferred to science data processing
[Tidy 22:18:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:18:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:18:48 INFO] resetting WatchDogTimer
[Status 22:18:48 INFO] Starting Set [AERI set: name V393, 6 scans, 0 angle, D16300 command]
[Ingest 22:18:48 INFO] Sending XML status message
[Status 22:18:48 INFO] Mirror angle: 0
[Mirror 22:18:49 INFO] rotating to position V
[Status 22:18:49 INFO] .SET file for ACQ96 ready
[Ingest 22:18:50 INFO] Starting acquisition
[Status 22:18:50 INFO] reading housekeeping
[Status 22:19:08 INFO] acquire complete
[Status 22:19:09 INFO] writing housekeeping
[Sequencer 22:19:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:19:09 INFO] incremented V scene to 393 completed views
[Sequencer 22:19:09 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:19:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:19:09 INFO] incremented to [AERI set: name W393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:19:09 INFO] V393.SIG(18)
[sigmove 22:19:09 DEBUG] transformed V393Ma.SPC -> V393MA.SPC
[sigmove 22:19:09 DEBUG] transformed V393Mb.SPC -> V393MB.SPC
[sigmove 22:19:09 DEBUG] transformed V393Mc.SPC -> V393MC.SPC
[sigmove 22:19:09 DEBUG] transformed V393Md.SPC -> V393MD.SPC
[sigmove 22:19:09 DEBUG] transformed V393Me.SPC -> V393ME.SPC
[sigmove 22:19:09 DEBUG] transformed V393Mf.SPC -> V393MF.SPC
[Status 22:19:09 INFO] data for V393 transferred to science data processing
[Tidy 22:19:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:19:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:19:09 INFO] resetting WatchDogTimer
[Status 22:19:09 INFO] Starting Set [AERI set: name W393, 6 scans, 0 angle, D16300 command]
[Ingest 22:19:09 INFO] Sending XML status message
[Status 22:19:09 INFO] Mirror angle: 0
[Mirror 22:19:10 INFO] rotating to position W
[Status 22:19:10 INFO] .SET file for ACQ96 ready
[Ingest 22:19:11 INFO] Starting acquisition
[Status 22:19:11 INFO] reading housekeeping
[Status 22:19:29 INFO] acquire complete
[Status 22:19:30 INFO] writing housekeeping
[Sequencer 22:19:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:19:30 INFO] incremented W scene to 393 completed views
[Sequencer 22:19:30 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:19:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:19:30 INFO] incremented to [AERI set: name X393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:19:30 INFO] W393.SIG(18)
[sigmove 22:19:30 DEBUG] transformed W393Ma.SPC -> W393MA.SPC
[sigmove 22:19:30 DEBUG] transformed W393Mb.SPC -> W393MB.SPC
[sigmove 22:19:30 DEBUG] transformed W393Mc.SPC -> W393MC.SPC
[sigmove 22:19:30 DEBUG] transformed W393Md.SPC -> W393MD.SPC
[sigmove 22:19:30 DEBUG] transformed W393Me.SPC -> W393ME.SPC
[sigmove 22:19:30 DEBUG] transformed W393Mf.SPC -> W393MF.SPC
[Status 22:19:30 INFO] data for W393 transferred to science data processing
[Tidy 22:19:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:19:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:19:30 INFO] resetting WatchDogTimer
[Status 22:19:31 INFO] Starting Set [AERI set: name X393, 6 scans, 0 angle, D16300 command]
[Ingest 22:19:31 INFO] Sending XML status message
[Status 22:19:31 INFO] Mirror angle: 0
[Mirror 22:19:31 INFO] rotating to position X
[Status 22:19:32 INFO] .SET file for ACQ96 ready
[Ingest 22:19:32 INFO] Starting acquisition
[Status 22:19:33 INFO] reading housekeeping
[Status 22:19:50 INFO] acquire complete
[Status 22:19:51 INFO] writing housekeeping
[Sequencer 22:19:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:19:51 INFO] incremented X scene to 393 completed views
[Sequencer 22:19:51 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:19:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:19:51 INFO] incremented to [AERI set: name Y393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:19:51 INFO] X393.SIG(18)
[sigmove 22:19:51 DEBUG] transformed X393Ma.SPC -> X393MA.SPC
[sigmove 22:19:51 DEBUG] transformed X393Mb.SPC -> X393MB.SPC
[sigmove 22:19:51 DEBUG] transformed X393Mc.SPC -> X393MC.SPC
[sigmove 22:19:51 DEBUG] transformed X393Md.SPC -> X393MD.SPC
[sigmove 22:19:51 DEBUG] transformed X393Me.SPC -> X393ME.SPC
[sigmove 22:19:51 DEBUG] transformed X393Mf.SPC -> X393MF.SPC
[Status 22:19:51 INFO] data for X393 transferred to science data processing
[Tidy 22:19:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:19:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:19:51 INFO] resetting WatchDogTimer
[Status 22:19:52 INFO] Starting Set [AERI set: name Y393, 6 scans, 0 angle, D16300 command]
[Ingest 22:19:52 INFO] Sending XML status message
[Status 22:19:52 INFO] Mirror angle: 0
[Mirror 22:19:52 INFO] rotating to position Y
[Status 22:19:53 INFO] .SET file for ACQ96 ready
[Ingest 22:19:53 INFO] Starting acquisition
[Status 22:19:54 INFO] reading housekeeping
[Status 22:20:12 INFO] acquire complete
[Status 22:20:13 INFO] writing housekeeping
[Sequencer 22:20:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:20:13 INFO] incremented Y scene to 393 completed views
[Sequencer 22:20:13 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:20:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:20:13 INFO] incremented to [AERI set: name Z393, 6 scans, 0 angle, D16300 command] set
[sigmove 22:20:13 INFO] Y393.SIG(18)
[sigmove 22:20:13 DEBUG] transformed Y393Ma.SPC -> Y393MA.SPC
[sigmove 22:20:13 DEBUG] transformed Y393Mb.SPC -> Y393MB.SPC
[sigmove 22:20:13 DEBUG] transformed Y393Mc.SPC -> Y393MC.SPC
[sigmove 22:20:13 DEBUG] transformed Y393Md.SPC -> Y393MD.SPC
[sigmove 22:20:13 DEBUG] transformed Y393Me.SPC -> Y393ME.SPC
[sigmove 22:20:13 DEBUG] transformed Y393Mf.SPC -> Y393MF.SPC
[Status 22:20:13 INFO] data for Y393 transferred to science data processing
[Tidy 22:20:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:20:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:20:13 INFO] resetting WatchDogTimer
[Status 22:20:13 INFO] Starting Set [AERI set: name Z393, 6 scans, 0 angle, D16300 command]
[Ingest 22:20:13 INFO] Sending XML status message
[Status 22:20:13 INFO] Mirror angle: 0
[Mirror 22:20:14 INFO] rotating to position Z
[Status 22:20:14 INFO] .SET file for ACQ96 ready
[Ingest 22:20:15 INFO] Starting acquisition
[Status 22:20:15 INFO] reading housekeeping
[Status 22:20:33 INFO] acquire complete
[Status 22:20:34 INFO] writing housekeeping
[Sequencer 22:20:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:20:34 INFO] incremented Z scene to 393 completed views
[Sequencer 22:20:34 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:20:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:20:34 INFO] incremented to [AERI set: name A394, 6 scans, 120 angle, D28300 command] set
[sigmove 22:20:34 INFO] Z393.SIG(18)
[sigmove 22:20:34 DEBUG] transformed Z393Ma.SPC -> Z393MA.SPC
[sigmove 22:20:34 DEBUG] transformed Z393Mb.SPC -> Z393MB.SPC
[sigmove 22:20:34 DEBUG] transformed Z393Mc.SPC -> Z393MC.SPC
[sigmove 22:20:34 DEBUG] transformed Z393Md.SPC -> Z393MD.SPC
[sigmove 22:20:34 DEBUG] transformed Z393Me.SPC -> Z393ME.SPC
[sigmove 22:20:34 DEBUG] transformed Z393Mf.SPC -> Z393MF.SPC
[Status 22:20:34 INFO] data for Z393 transferred to science data processing
[Tidy 22:20:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:20:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:20:34 INFO] resetting WatchDogTimer
[Status 22:20:35 INFO] Starting Set [AERI set: name A394, 6 scans, 120 angle, D28300 command]
[Ingest 22:20:35 INFO] Sending XML status message
[Status 22:20:35 INFO] Mirror angle: 120
[Mirror 22:20:35 INFO] rotating to position A
[Status 22:20:37 INFO] .SET file for ACQ96 ready
[Ingest 22:20:37 INFO] Starting acquisition
[Status 22:20:38 INFO] reading housekeeping
[Status 22:20:55 INFO] acquire complete
[Status 22:20:57 INFO] writing housekeeping
[Sequencer 22:20:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:20:57 INFO] incremented A scene to 394 completed views
[Sequencer 22:20:57 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:20:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:20:57 INFO] incremented to [AERI set: name H394, 6 scans, 60 angle, D22500 command] set
[sigmove 22:20:57 INFO] A394.SIG(18)
[sigmove 22:20:57 DEBUG] transformed A394Ma.SPC -> A394MA.SPC
[sigmove 22:20:57 DEBUG] transformed A394Mb.SPC -> A394MB.SPC
[sigmove 22:20:57 DEBUG] transformed A394Mc.SPC -> A394MC.SPC
[sigmove 22:20:57 DEBUG] transformed A394Md.SPC -> A394MD.SPC
[sigmove 22:20:57 DEBUG] transformed A394Me.SPC -> A394ME.SPC
[sigmove 22:20:57 DEBUG] transformed A394Mf.SPC -> A394MF.SPC
[Status 22:20:57 INFO] data for A394 transferred to science data processing
[Tidy 22:20:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:20:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:20:57 INFO] resetting WatchDogTimer
[Status 22:20:57 INFO] Starting Set [AERI set: name H394, 6 scans, 60 angle, D22500 command]
[Ingest 22:20:57 INFO] Sending XML status message
[Status 22:20:57 INFO] Mirror angle: 60
[Mirror 22:20:57 INFO] rotating to position H
[Status 22:20:59 INFO] .SET file for ACQ96 ready
[Ingest 22:20:59 INFO] Starting acquisition
[Status 22:21:00 INFO] reading housekeeping
[Status 22:21:17 INFO] acquire complete
[Status 22:21:18 INFO] writing housekeeping
[Sequencer 22:21:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:21:18 INFO] incremented H scene to 394 completed views
[Sequencer 22:21:18 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:21:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:21:18 INFO] incremented to [AERI set: name S394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:21:18 INFO] H394.SIG(18)
[sigmove 22:21:18 DEBUG] transformed H394Ma.SPC -> H394MA.SPC
[sigmove 22:21:18 DEBUG] transformed H394Mb.SPC -> H394MB.SPC
[sigmove 22:21:18 DEBUG] transformed H394Mc.SPC -> H394MC.SPC
[sigmove 22:21:18 DEBUG] transformed H394Md.SPC -> H394MD.SPC
[sigmove 22:21:18 DEBUG] transformed H394Me.SPC -> H394ME.SPC
[sigmove 22:21:18 DEBUG] transformed H394Mf.SPC -> H394MF.SPC
[Status 22:21:18 INFO] data for H394 transferred to science data processing
[Tidy 22:21:18 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:21:18 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:21:18 INFO] resetting WatchDogTimer
[Status 22:21:18 INFO] Starting Set [AERI set: name S394, 6 scans, 0 angle, D16300 command]
[Ingest 22:21:18 INFO] Sending XML status message
[Status 22:21:18 INFO] Mirror angle: 0
[Mirror 22:21:19 INFO] rotating to position S
[Status 22:21:20 INFO] .SET file for ACQ96 ready
[Ingest 22:21:20 INFO] Starting acquisition
[Status 22:21:21 INFO] reading housekeeping
[Status 22:21:39 INFO] acquire complete
[Status 22:21:40 INFO] writing housekeeping
[Sequencer 22:21:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:21:40 INFO] incremented S scene to 394 completed views
[Sequencer 22:21:40 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:21:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:21:40 INFO] incremented to [AERI set: name T394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:21:40 INFO] S394.SIG(18)
[sigmove 22:21:40 DEBUG] transformed S394Ma.SPC -> S394MA.SPC
[sigmove 22:21:40 DEBUG] transformed S394Mb.SPC -> S394MB.SPC
[sigmove 22:21:40 DEBUG] transformed S394Mc.SPC -> S394MC.SPC
[sigmove 22:21:40 DEBUG] transformed S394Md.SPC -> S394MD.SPC
[sigmove 22:21:40 DEBUG] transformed S394Me.SPC -> S394ME.SPC
[sigmove 22:21:40 DEBUG] transformed S394Mf.SPC -> S394MF.SPC
[Status 22:21:40 INFO] data for S394 transferred to science data processing
[Tidy 22:21:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:21:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:21:40 INFO] resetting WatchDogTimer
[Status 22:21:41 INFO] Starting Set [AERI set: name T394, 6 scans, 0 angle, D16300 command]
[Ingest 22:21:41 INFO] Sending XML status message
[Status 22:21:41 INFO] Mirror angle: 0
[Mirror 22:21:41 INFO] rotating to position T
[Status 22:21:42 INFO] .SET file for ACQ96 ready
[Ingest 22:21:42 INFO] Starting acquisition
[Status 22:21:43 INFO] reading housekeeping
[Status 22:22:00 INFO] acquire complete
[Status 22:22:02 INFO] writing housekeeping
[Sequencer 22:22:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:22:02 INFO] incremented T scene to 394 completed views
[Sequencer 22:22:02 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:22:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:22:02 INFO] incremented to [AERI set: name U394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:22:02 INFO] T394.SIG(18)
[sigmove 22:22:02 DEBUG] transformed T394Ma.SPC -> T394MA.SPC
[sigmove 22:22:02 DEBUG] transformed T394Mb.SPC -> T394MB.SPC
[sigmove 22:22:02 DEBUG] transformed T394Mc.SPC -> T394MC.SPC
[sigmove 22:22:02 DEBUG] transformed T394Md.SPC -> T394MD.SPC
[sigmove 22:22:02 DEBUG] transformed T394Me.SPC -> T394ME.SPC
[sigmove 22:22:02 DEBUG] transformed T394Mf.SPC -> T394MF.SPC
[Status 22:22:02 INFO] data for T394 transferred to science data processing
[Tidy 22:22:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:22:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:22:02 INFO] resetting WatchDogTimer
[Status 22:22:02 INFO] Starting Set [AERI set: name U394, 6 scans, 0 angle, D16300 command]
[Ingest 22:22:02 INFO] Sending XML status message
[Status 22:22:02 INFO] Mirror angle: 0
[Mirror 22:22:03 INFO] rotating to position U
[Status 22:22:03 INFO] .SET file for ACQ96 ready
[Ingest 22:22:04 INFO] Starting acquisition
[Status 22:22:04 INFO] reading housekeeping
[Status 22:22:22 INFO] acquire complete
[Status 22:22:23 INFO] writing housekeeping
[Sequencer 22:22:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:22:23 INFO] incremented U scene to 394 completed views
[Sequencer 22:22:23 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:22:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:22:23 INFO] incremented to [AERI set: name V394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:22:23 INFO] U394.SIG(18)
[sigmove 22:22:23 DEBUG] transformed U394Ma.SPC -> U394MA.SPC
[sigmove 22:22:23 DEBUG] transformed U394Mb.SPC -> U394MB.SPC
[sigmove 22:22:23 DEBUG] transformed U394Mc.SPC -> U394MC.SPC
[sigmove 22:22:23 DEBUG] transformed U394Md.SPC -> U394MD.SPC
[sigmove 22:22:23 DEBUG] transformed U394Me.SPC -> U394ME.SPC
[sigmove 22:22:23 DEBUG] transformed U394Mf.SPC -> U394MF.SPC
[Status 22:22:23 INFO] data for U394 transferred to science data processing
[Tidy 22:22:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:22:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:22:23 INFO] resetting WatchDogTimer
[Status 22:22:23 INFO] Starting Set [AERI set: name V394, 6 scans, 0 angle, D16300 command]
[Ingest 22:22:23 INFO] Sending XML status message
[Status 22:22:23 INFO] Mirror angle: 0
[Mirror 22:22:24 INFO] rotating to position V
[Status 22:22:25 INFO] .SET file for ACQ96 ready
[Ingest 22:22:25 INFO] Starting acquisition
[Status 22:22:26 INFO] reading housekeeping
[Status 22:22:43 INFO] acquire complete
[Status 22:22:44 INFO] writing housekeeping
[Sequencer 22:22:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:22:44 INFO] incremented V scene to 394 completed views
[Sequencer 22:22:44 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:22:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:22:44 INFO] incremented to [AERI set: name W394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:22:44 INFO] V394.SIG(18)
[sigmove 22:22:44 DEBUG] transformed V394Ma.SPC -> V394MA.SPC
[sigmove 22:22:44 DEBUG] transformed V394Mb.SPC -> V394MB.SPC
[sigmove 22:22:44 DEBUG] transformed V394Mc.SPC -> V394MC.SPC
[sigmove 22:22:44 DEBUG] transformed V394Md.SPC -> V394MD.SPC
[sigmove 22:22:44 DEBUG] transformed V394Me.SPC -> V394ME.SPC
[sigmove 22:22:44 DEBUG] transformed V394Mf.SPC -> V394MF.SPC
[Status 22:22:44 INFO] data for V394 transferred to science data processing
[Tidy 22:22:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:22:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:22:44 INFO] resetting WatchDogTimer
[Status 22:22:45 INFO] Starting Set [AERI set: name W394, 6 scans, 0 angle, D16300 command]
[Ingest 22:22:45 INFO] Sending XML status message
[Status 22:22:45 INFO] Mirror angle: 0
[Mirror 22:22:45 INFO] rotating to position W
[Status 22:22:46 INFO] .SET file for ACQ96 ready
[Ingest 22:22:46 INFO] Starting acquisition
[Status 22:22:47 INFO] reading housekeeping
[Status 22:23:04 INFO] acquire complete
[Status 22:23:05 INFO] writing housekeeping
[Sequencer 22:23:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:23:05 INFO] incremented W scene to 394 completed views
[Sequencer 22:23:05 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:23:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:23:05 INFO] incremented to [AERI set: name X394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:23:06 INFO] W394.SIG(18)
[sigmove 22:23:06 DEBUG] transformed W394Ma.SPC -> W394MA.SPC
[sigmove 22:23:06 DEBUG] transformed W394Mb.SPC -> W394MB.SPC
[sigmove 22:23:06 DEBUG] transformed W394Mc.SPC -> W394MC.SPC
[sigmove 22:23:06 DEBUG] transformed W394Md.SPC -> W394MD.SPC
[sigmove 22:23:06 DEBUG] transformed W394Me.SPC -> W394ME.SPC
[sigmove 22:23:06 DEBUG] transformed W394Mf.SPC -> W394MF.SPC
[Status 22:23:06 INFO] data for W394 transferred to science data processing
[Tidy 22:23:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:23:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:23:06 INFO] resetting WatchDogTimer
[Status 22:23:06 INFO] Starting Set [AERI set: name X394, 6 scans, 0 angle, D16300 command]
[Ingest 22:23:06 INFO] Sending XML status message
[Status 22:23:06 INFO] Mirror angle: 0
[Mirror 22:23:06 INFO] rotating to position X
[Status 22:23:07 INFO] .SET file for ACQ96 ready
[Ingest 22:23:07 INFO] Starting acquisition
[Status 22:23:08 INFO] reading housekeeping
[Status 22:23:26 INFO] acquire complete
[Status 22:23:27 INFO] writing housekeeping
[Sequencer 22:23:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:23:27 INFO] incremented X scene to 394 completed views
[Sequencer 22:23:27 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:23:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:23:27 INFO] incremented to [AERI set: name Y394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:23:27 INFO] X394.SIG(18)
[sigmove 22:23:27 DEBUG] transformed X394Ma.SPC -> X394MA.SPC
[sigmove 22:23:27 DEBUG] transformed X394Mb.SPC -> X394MB.SPC
[sigmove 22:23:27 DEBUG] transformed X394Mc.SPC -> X394MC.SPC
[sigmove 22:23:27 DEBUG] transformed X394Md.SPC -> X394MD.SPC
[sigmove 22:23:27 DEBUG] transformed X394Me.SPC -> X394ME.SPC
[sigmove 22:23:27 DEBUG] transformed X394Mf.SPC -> X394MF.SPC
[Status 22:23:27 INFO] data for X394 transferred to science data processing
[Tidy 22:23:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:23:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:23:27 INFO] resetting WatchDogTimer
[Status 22:23:27 INFO] Starting Set [AERI set: name Y394, 6 scans, 0 angle, D16300 command]
[Ingest 22:23:27 INFO] Sending XML status message
[Status 22:23:27 INFO] Mirror angle: 0
[Mirror 22:23:28 INFO] rotating to position Y
[Status 22:23:28 INFO] .SET file for ACQ96 ready
[Ingest 22:23:29 INFO] Starting acquisition
[Status 22:23:29 INFO] reading housekeeping
[Status 22:23:47 INFO] acquire complete
[Status 22:23:48 INFO] writing housekeeping
[Sequencer 22:23:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:23:48 INFO] incremented Y scene to 394 completed views
[Sequencer 22:23:48 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:23:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:23:48 INFO] incremented to [AERI set: name Z394, 6 scans, 0 angle, D16300 command] set
[sigmove 22:23:48 INFO] Y394.SIG(18)
[sigmove 22:23:48 DEBUG] transformed Y394Ma.SPC -> Y394MA.SPC
[sigmove 22:23:48 DEBUG] transformed Y394Mb.SPC -> Y394MB.SPC
[sigmove 22:23:48 DEBUG] transformed Y394Mc.SPC -> Y394MC.SPC
[sigmove 22:23:48 DEBUG] transformed Y394Md.SPC -> Y394MD.SPC
[sigmove 22:23:48 DEBUG] transformed Y394Me.SPC -> Y394ME.SPC
[sigmove 22:23:48 DEBUG] transformed Y394Mf.SPC -> Y394MF.SPC
[Status 22:23:48 INFO] data for Y394 transferred to science data processing
[Tidy 22:23:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:23:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:23:48 INFO] resetting WatchDogTimer
[Status 22:23:49 INFO] Starting Set [AERI set: name Z394, 6 scans, 0 angle, D16300 command]
[Ingest 22:23:49 INFO] Sending XML status message
[Status 22:23:49 INFO] Mirror angle: 0
[Mirror 22:23:49 INFO] rotating to position Z
[Status 22:23:50 INFO] .SET file for ACQ96 ready
[Ingest 22:23:50 INFO] Starting acquisition
[Status 22:23:51 INFO] reading housekeeping
[Status 22:24:08 INFO] acquire complete
[Status 22:24:09 INFO] writing housekeeping
[Sequencer 22:24:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:24:09 INFO] incremented Z scene to 394 completed views
[Sequencer 22:24:09 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:24:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:24:09 INFO] incremented to [AERI set: name H395, 6 scans, 60 angle, D22500 command] set
[sigmove 22:24:09 INFO] Z394.SIG(18)
[sigmove 22:24:09 DEBUG] transformed Z394Ma.SPC -> Z394MA.SPC
[sigmove 22:24:09 DEBUG] transformed Z394Mb.SPC -> Z394MB.SPC
[sigmove 22:24:09 DEBUG] transformed Z394Mc.SPC -> Z394MC.SPC
[sigmove 22:24:09 DEBUG] transformed Z394Md.SPC -> Z394MD.SPC
[sigmove 22:24:09 DEBUG] transformed Z394Me.SPC -> Z394ME.SPC
[sigmove 22:24:09 DEBUG] transformed Z394Mf.SPC -> Z394MF.SPC
[Status 22:24:09 INFO] data for Z394 transferred to science data processing
[Tidy 22:24:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:24:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:24:09 INFO] resetting WatchDogTimer
[Status 22:24:10 INFO] Starting Set [AERI set: name H395, 6 scans, 60 angle, D22500 command]
[Ingest 22:24:10 INFO] Sending XML status message
[Status 22:24:10 INFO] Mirror angle: 60
[Mirror 22:24:10 INFO] rotating to position H
[Status 22:24:12 INFO] .SET file for ACQ96 ready
[Ingest 22:24:12 INFO] Starting acquisition
[Status 22:24:13 INFO] reading housekeeping
[Status 22:24:31 INFO] acquire complete
[Status 22:24:32 INFO] writing housekeeping
[Sequencer 22:24:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:24:32 INFO] incremented H scene to 395 completed views
[Sequencer 22:24:32 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:24:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:24:32 INFO] incremented to [AERI set: name A395, 6 scans, 120 angle, D28300 command] set
[sigmove 22:24:32 INFO] H395.SIG(18)
[sigmove 22:24:32 DEBUG] transformed H395Ma.SPC -> H395MA.SPC
[sigmove 22:24:32 DEBUG] transformed H395Mb.SPC -> H395MB.SPC
[sigmove 22:24:32 DEBUG] transformed H395Mc.SPC -> H395MC.SPC
[sigmove 22:24:32 DEBUG] transformed H395Md.SPC -> H395MD.SPC
[sigmove 22:24:32 DEBUG] transformed H395Me.SPC -> H395ME.SPC
[sigmove 22:24:32 DEBUG] transformed H395Mf.SPC -> H395MF.SPC
[Status 22:24:32 INFO] data for H395 transferred to science data processing
[Tidy 22:24:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:24:32 INFO] A393.FIN(19),H393.FIN(19),S393.FIN(19),T393.FIN(19),U393.FIN(19),V393.FIN(19),W393.FIN(19),X393.FIN(19),Y393.FIN(19),Z393.FIN(19),A394.FIN(19),H394.FIN(19),S394.FIN(19),T394.FIN(19),U394.FIN(19),V394.FIN(19),W394.FIN(19),X394.FIN(19),Y394.FIN(19),Z394.FIN(19)
[sigmove 22:24:32 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:24:32 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:24:39 DEBUG] done zipping
[WatchDog 22:24:39 INFO] resetting WatchDogTimer
[Status 22:24:40 INFO] Starting Set [AERI set: name A395, 6 scans, 120 angle, D28300 command]
[Ingest 22:24:40 INFO] Sending XML status message
[Status 22:24:40 INFO] Mirror angle: 120
[Mirror 22:24:40 INFO] rotating to position A
[Status 22:24:41 INFO] .SET file for ACQ96 ready
[Ingest 22:24:42 INFO] Starting acquisition
[Status 22:24:42 INFO] reading housekeeping
[Status 22:25:00 INFO] acquire complete
[Status 22:25:01 INFO] writing housekeeping
[Sequencer 22:25:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:25:01 INFO] incremented A scene to 395 completed views
[Sequencer 22:25:01 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:25:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:25:01 INFO] incremented to [AERI set: name S395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:25:01 INFO] A395.SIG(18)
[sigmove 22:25:01 DEBUG] transformed A395Ma.SPC -> A395MA.SPC
[sigmove 22:25:01 DEBUG] transformed A395Mb.SPC -> A395MB.SPC
[sigmove 22:25:01 DEBUG] transformed A395Mc.SPC -> A395MC.SPC
[sigmove 22:25:01 DEBUG] transformed A395Md.SPC -> A395MD.SPC
[sigmove 22:25:01 DEBUG] transformed A395Me.SPC -> A395ME.SPC
[sigmove 22:25:01 DEBUG] transformed A395Mf.SPC -> A395MF.SPC
[Status 22:25:01 INFO] data for A395 transferred to science data processing
[Tidy 22:25:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:25:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:25:01 INFO] resetting WatchDogTimer
[Status 22:25:01 INFO] Starting Set [AERI set: name S395, 6 scans, 0 angle, D16300 command]
[Ingest 22:25:01 INFO] Sending XML status message
[Status 22:25:02 INFO] Mirror angle: 0
[Mirror 22:25:02 INFO] rotating to position S
[Status 22:25:04 INFO] .SET file for ACQ96 ready
[Ingest 22:25:04 INFO] Starting acquisition
[Status 22:25:05 INFO] reading housekeeping
[Status 22:25:22 INFO] acquire complete
[Status 22:25:23 INFO] writing housekeeping
[Sequencer 22:25:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:25:23 INFO] incremented S scene to 395 completed views
[Sequencer 22:25:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:25:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:25:23 INFO] incremented to [AERI set: name T395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:25:23 INFO] S395.SIG(18)
[sigmove 22:25:23 DEBUG] transformed S395Ma.SPC -> S395MA.SPC
[sigmove 22:25:23 DEBUG] transformed S395Mb.SPC -> S395MB.SPC
[sigmove 22:25:23 DEBUG] transformed S395Mc.SPC -> S395MC.SPC
[sigmove 22:25:23 DEBUG] transformed S395Md.SPC -> S395MD.SPC
[sigmove 22:25:23 DEBUG] transformed S395Me.SPC -> S395ME.SPC
[sigmove 22:25:23 DEBUG] transformed S395Mf.SPC -> S395MF.SPC
[Status 22:25:23 INFO] data for S395 transferred to science data processing
[Tidy 22:25:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:25:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:25:23 INFO] resetting WatchDogTimer
[Status 22:25:24 INFO] Starting Set [AERI set: name T395, 6 scans, 0 angle, D16300 command]
[Ingest 22:25:24 INFO] Sending XML status message
[Status 22:25:24 INFO] Mirror angle: 0
[Mirror 22:25:25 INFO] rotating to position T
[Status 22:25:25 INFO] .SET file for ACQ96 ready
[Ingest 22:25:26 INFO] Starting acquisition
[Status 22:25:26 INFO] reading housekeeping
[Status 22:25:44 INFO] acquire complete
[Status 22:25:45 INFO] writing housekeeping
[Sequencer 22:25:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:25:45 INFO] incremented T scene to 395 completed views
[Sequencer 22:25:45 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:25:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:25:45 INFO] incremented to [AERI set: name U395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:25:45 INFO] T395.SIG(18)
[sigmove 22:25:45 DEBUG] transformed T395Ma.SPC -> T395MA.SPC
[sigmove 22:25:45 DEBUG] transformed T395Mb.SPC -> T395MB.SPC
[sigmove 22:25:45 DEBUG] transformed T395Mc.SPC -> T395MC.SPC
[sigmove 22:25:45 DEBUG] transformed T395Md.SPC -> T395MD.SPC
[sigmove 22:25:45 DEBUG] transformed T395Me.SPC -> T395ME.SPC
[sigmove 22:25:45 DEBUG] transformed T395Mf.SPC -> T395MF.SPC
[Status 22:25:45 INFO] data for T395 transferred to science data processing
[Tidy 22:25:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:25:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:25:45 INFO] resetting WatchDogTimer
[Status 22:25:45 INFO] Starting Set [AERI set: name U395, 6 scans, 0 angle, D16300 command]
[Ingest 22:25:45 INFO] Sending XML status message
[Status 22:25:45 INFO] Mirror angle: 0
[Mirror 22:25:46 INFO] rotating to position U
[Status 22:25:46 INFO] .SET file for ACQ96 ready
[Ingest 22:25:47 INFO] Starting acquisition
[Status 22:25:47 INFO] reading housekeeping
[Status 22:26:05 INFO] acquire complete
[Status 22:26:06 INFO] writing housekeeping
[Sequencer 22:26:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:26:06 INFO] incremented U scene to 395 completed views
[Sequencer 22:26:06 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:26:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:26:06 INFO] incremented to [AERI set: name V395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:26:06 INFO] U395.SIG(18)
[sigmove 22:26:06 DEBUG] transformed U395Ma.SPC -> U395MA.SPC
[sigmove 22:26:06 DEBUG] transformed U395Mb.SPC -> U395MB.SPC
[sigmove 22:26:06 DEBUG] transformed U395Mc.SPC -> U395MC.SPC
[sigmove 22:26:06 DEBUG] transformed U395Md.SPC -> U395MD.SPC
[sigmove 22:26:06 DEBUG] transformed U395Me.SPC -> U395ME.SPC
[sigmove 22:26:06 DEBUG] transformed U395Mf.SPC -> U395MF.SPC
[Status 22:26:06 INFO] data for U395 transferred to science data processing
[Tidy 22:26:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:26:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:26:06 INFO] resetting WatchDogTimer
[Status 22:26:07 INFO] Starting Set [AERI set: name V395, 6 scans, 0 angle, D16300 command]
[Ingest 22:26:07 INFO] Sending XML status message
[Status 22:26:07 INFO] Mirror angle: 0
[Mirror 22:26:07 INFO] rotating to position V
[Status 22:26:08 INFO] .SET file for ACQ96 ready
[Ingest 22:26:08 INFO] Starting acquisition
[Status 22:26:09 INFO] reading housekeeping
[Status 22:26:26 INFO] acquire complete
[Status 22:26:27 INFO] writing housekeeping
[Sequencer 22:26:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:26:27 INFO] incremented V scene to 395 completed views
[Sequencer 22:26:27 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:26:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:26:27 INFO] incremented to [AERI set: name W395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:26:27 INFO] V395.SIG(18)
[sigmove 22:26:27 DEBUG] transformed V395Ma.SPC -> V395MA.SPC
[sigmove 22:26:27 DEBUG] transformed V395Mb.SPC -> V395MB.SPC
[sigmove 22:26:27 DEBUG] transformed V395Mc.SPC -> V395MC.SPC
[sigmove 22:26:27 DEBUG] transformed V395Md.SPC -> V395MD.SPC
[sigmove 22:26:27 DEBUG] transformed V395Me.SPC -> V395ME.SPC
[sigmove 22:26:27 DEBUG] transformed V395Mf.SPC -> V395MF.SPC
[Status 22:26:27 INFO] data for V395 transferred to science data processing
[Tidy 22:26:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:26:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:26:27 INFO] resetting WatchDogTimer
[Status 22:26:28 INFO] Starting Set [AERI set: name W395, 6 scans, 0 angle, D16300 command]
[Ingest 22:26:28 INFO] Sending XML status message
[Status 22:26:28 INFO] Mirror angle: 0
[Mirror 22:26:28 INFO] rotating to position W
[Status 22:26:29 INFO] .SET file for ACQ96 ready
[Ingest 22:26:29 INFO] Starting acquisition
[Status 22:26:30 INFO] reading housekeeping
[Status 22:26:47 INFO] acquire complete
[Status 22:26:49 INFO] writing housekeeping
[Sequencer 22:26:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:26:49 INFO] incremented W scene to 395 completed views
[Sequencer 22:26:49 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:26:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:26:49 INFO] incremented to [AERI set: name X395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:26:49 INFO] W395.SIG(18)
[sigmove 22:26:49 DEBUG] transformed W395Ma.SPC -> W395MA.SPC
[sigmove 22:26:49 DEBUG] transformed W395Mb.SPC -> W395MB.SPC
[sigmove 22:26:49 DEBUG] transformed W395Mc.SPC -> W395MC.SPC
[sigmove 22:26:49 DEBUG] transformed W395Md.SPC -> W395MD.SPC
[sigmove 22:26:49 DEBUG] transformed W395Me.SPC -> W395ME.SPC
[sigmove 22:26:49 DEBUG] transformed W395Mf.SPC -> W395MF.SPC
[Status 22:26:49 INFO] data for W395 transferred to science data processing
[Tidy 22:26:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:26:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:26:49 INFO] resetting WatchDogTimer
[Status 22:26:49 INFO] Starting Set [AERI set: name X395, 6 scans, 0 angle, D16300 command]
[Ingest 22:26:49 INFO] Sending XML status message
[Status 22:26:49 INFO] Mirror angle: 0
[Mirror 22:26:50 INFO] rotating to position X
[Status 22:26:50 INFO] .SET file for ACQ96 ready
[Ingest 22:26:51 INFO] Starting acquisition
[Status 22:26:51 INFO] reading housekeeping
[Status 22:27:09 INFO] acquire complete
[Status 22:27:10 INFO] writing housekeeping
[Sequencer 22:27:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:27:10 INFO] incremented X scene to 395 completed views
[Sequencer 22:27:10 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:27:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:27:10 INFO] incremented to [AERI set: name Y395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:27:10 INFO] X395.SIG(18)
[sigmove 22:27:10 DEBUG] transformed X395Ma.SPC -> X395MA.SPC
[sigmove 22:27:10 DEBUG] transformed X395Mb.SPC -> X395MB.SPC
[sigmove 22:27:10 DEBUG] transformed X395Mc.SPC -> X395MC.SPC
[sigmove 22:27:10 DEBUG] transformed X395Md.SPC -> X395MD.SPC
[sigmove 22:27:10 DEBUG] transformed X395Me.SPC -> X395ME.SPC
[sigmove 22:27:10 DEBUG] transformed X395Mf.SPC -> X395MF.SPC
[Status 22:27:10 INFO] data for X395 transferred to science data processing
[Tidy 22:27:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:27:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:27:10 INFO] resetting WatchDogTimer
[Status 22:27:10 INFO] Starting Set [AERI set: name Y395, 6 scans, 0 angle, D16300 command]
[Ingest 22:27:10 INFO] Sending XML status message
[Status 22:27:10 INFO] Mirror angle: 0
[Mirror 22:27:11 INFO] rotating to position Y
[Status 22:27:12 INFO] .SET file for ACQ96 ready
[Ingest 22:27:12 INFO] Starting acquisition
[Status 22:27:13 INFO] reading housekeeping
[Status 22:27:30 INFO] acquire complete
[Status 22:27:31 INFO] writing housekeeping
[Sequencer 22:27:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:27:31 INFO] incremented Y scene to 395 completed views
[Sequencer 22:27:31 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:27:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:27:31 INFO] incremented to [AERI set: name Z395, 6 scans, 0 angle, D16300 command] set
[sigmove 22:27:31 INFO] Y395.SIG(18)
[sigmove 22:27:31 DEBUG] transformed Y395Ma.SPC -> Y395MA.SPC
[sigmove 22:27:31 DEBUG] transformed Y395Mb.SPC -> Y395MB.SPC
[sigmove 22:27:31 DEBUG] transformed Y395Mc.SPC -> Y395MC.SPC
[sigmove 22:27:31 DEBUG] transformed Y395Md.SPC -> Y395MD.SPC
[sigmove 22:27:31 DEBUG] transformed Y395Me.SPC -> Y395ME.SPC
[sigmove 22:27:31 DEBUG] transformed Y395Mf.SPC -> Y395MF.SPC
[Status 22:27:31 INFO] data for Y395 transferred to science data processing
[Tidy 22:27:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:27:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:27:31 INFO] resetting WatchDogTimer
[Status 22:27:32 INFO] Starting Set [AERI set: name Z395, 6 scans, 0 angle, D16300 command]
[Ingest 22:27:32 INFO] Sending XML status message
[Status 22:27:32 INFO] Mirror angle: 0
[Mirror 22:27:32 INFO] rotating to position Z
[Status 22:27:33 INFO] .SET file for ACQ96 ready
[Ingest 22:27:33 INFO] Starting acquisition
[Status 22:27:34 INFO] reading housekeeping
[Status 22:27:51 INFO] acquire complete
[Status 22:27:53 INFO] writing housekeeping
[Sequencer 22:27:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:27:53 INFO] incremented Z scene to 395 completed views
[Sequencer 22:27:53 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:27:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:27:53 INFO] incremented to [AERI set: name A396, 6 scans, 120 angle, D28300 command] set
[sigmove 22:27:53 INFO] Z395.SIG(18)
[sigmove 22:27:53 DEBUG] transformed Z395Ma.SPC -> Z395MA.SPC
[sigmove 22:27:53 DEBUG] transformed Z395Mb.SPC -> Z395MB.SPC
[sigmove 22:27:53 DEBUG] transformed Z395Mc.SPC -> Z395MC.SPC
[sigmove 22:27:53 DEBUG] transformed Z395Md.SPC -> Z395MD.SPC
[sigmove 22:27:53 DEBUG] transformed Z395Me.SPC -> Z395ME.SPC
[sigmove 22:27:53 DEBUG] transformed Z395Mf.SPC -> Z395MF.SPC
[Status 22:27:53 INFO] data for Z395 transferred to science data processing
[Tidy 22:27:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:27:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:27:53 INFO] resetting WatchDogTimer
[Status 22:27:53 INFO] Starting Set [AERI set: name A396, 6 scans, 120 angle, D28300 command]
[Ingest 22:27:53 INFO] Sending XML status message
[Status 22:27:53 INFO] Mirror angle: 120
[Mirror 22:27:54 INFO] rotating to position A
[Status 22:27:55 INFO] .SET file for ACQ96 ready
[Ingest 22:27:56 INFO] Starting acquisition
[Status 22:27:56 INFO] reading housekeeping
[Status 22:28:14 INFO] acquire complete
[Status 22:28:15 INFO] writing housekeeping
[Sequencer 22:28:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:28:15 INFO] incremented A scene to 396 completed views
[Sequencer 22:28:15 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:28:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:28:15 INFO] incremented to [AERI set: name H396, 6 scans, 60 angle, D22500 command] set
[sigmove 22:28:15 INFO] A396.SIG(18)
[sigmove 22:28:15 DEBUG] transformed A396Ma.SPC -> A396MA.SPC
[sigmove 22:28:15 DEBUG] transformed A396Mb.SPC -> A396MB.SPC
[sigmove 22:28:15 DEBUG] transformed A396Mc.SPC -> A396MC.SPC
[sigmove 22:28:15 DEBUG] transformed A396Md.SPC -> A396MD.SPC
[sigmove 22:28:15 DEBUG] transformed A396Me.SPC -> A396ME.SPC
[sigmove 22:28:15 DEBUG] transformed A396Mf.SPC -> A396MF.SPC
[Status 22:28:15 INFO] data for A396 transferred to science data processing
[Tidy 22:28:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:28:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:28:15 INFO] resetting WatchDogTimer
[Status 22:28:16 INFO] Starting Set [AERI set: name H396, 6 scans, 60 angle, D22500 command]
[Ingest 22:28:16 INFO] Sending XML status message
[Status 22:28:16 INFO] Mirror angle: 60
[Mirror 22:28:16 INFO] rotating to position H
[Status 22:28:17 INFO] .SET file for ACQ96 ready
[Ingest 22:28:18 INFO] Starting acquisition
[Status 22:28:18 INFO] reading housekeeping
[Status 22:28:36 INFO] acquire complete
[Status 22:28:37 INFO] writing housekeeping
[Sequencer 22:28:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:28:37 INFO] incremented H scene to 396 completed views
[Sequencer 22:28:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:28:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:28:37 INFO] incremented to [AERI set: name S396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:28:37 INFO] H396.SIG(18)
[sigmove 22:28:37 DEBUG] transformed H396Ma.SPC -> H396MA.SPC
[sigmove 22:28:37 DEBUG] transformed H396Mb.SPC -> H396MB.SPC
[sigmove 22:28:37 DEBUG] transformed H396Mc.SPC -> H396MC.SPC
[sigmove 22:28:37 DEBUG] transformed H396Md.SPC -> H396MD.SPC
[sigmove 22:28:37 DEBUG] transformed H396Me.SPC -> H396ME.SPC
[sigmove 22:28:37 DEBUG] transformed H396Mf.SPC -> H396MF.SPC
[Status 22:28:37 INFO] data for H396 transferred to science data processing
[Tidy 22:28:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:28:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:28:37 INFO] resetting WatchDogTimer
[Status 22:28:38 INFO] Starting Set [AERI set: name S396, 6 scans, 0 angle, D16300 command]
[Ingest 22:28:38 INFO] Sending XML status message
[Status 22:28:38 INFO] Mirror angle: 0
[Mirror 22:28:38 INFO] rotating to position S
[Status 22:28:40 INFO] .SET file for ACQ96 ready
[Ingest 22:28:40 INFO] Starting acquisition
[Status 22:28:41 INFO] reading housekeeping
[Status 22:28:59 INFO] acquire complete
[Status 22:29:00 INFO] writing housekeeping
[Sequencer 22:29:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:29:00 INFO] incremented S scene to 396 completed views
[Sequencer 22:29:00 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:29:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:29:00 INFO] incremented to [AERI set: name T396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:29:00 INFO] S396.SIG(18)
[sigmove 22:29:00 DEBUG] transformed S396Ma.SPC -> S396MA.SPC
[sigmove 22:29:00 DEBUG] transformed S396Mb.SPC -> S396MB.SPC
[sigmove 22:29:00 DEBUG] transformed S396Mc.SPC -> S396MC.SPC
[sigmove 22:29:00 DEBUG] transformed S396Md.SPC -> S396MD.SPC
[sigmove 22:29:00 DEBUG] transformed S396Me.SPC -> S396ME.SPC
[sigmove 22:29:00 DEBUG] transformed S396Mf.SPC -> S396MF.SPC
[Status 22:29:00 INFO] data for S396 transferred to science data processing
[Tidy 22:29:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:29:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:29:00 INFO] resetting WatchDogTimer
[Status 22:29:00 INFO] Starting Set [AERI set: name T396, 6 scans, 0 angle, D16300 command]
[Ingest 22:29:00 INFO] Sending XML status message
[Status 22:29:00 INFO] Mirror angle: 0
[Mirror 22:29:01 INFO] rotating to position T
[Status 22:29:02 INFO] .SET file for ACQ96 ready
[Ingest 22:29:02 INFO] Starting acquisition
[Status 22:29:03 INFO] reading housekeeping
[Status 22:29:20 INFO] acquire complete
[Status 22:29:21 INFO] writing housekeeping
[Sequencer 22:29:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:29:21 INFO] incremented T scene to 396 completed views
[Sequencer 22:29:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:29:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:29:21 INFO] incremented to [AERI set: name U396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:29:21 INFO] T396.SIG(18)
[sigmove 22:29:21 DEBUG] transformed T396Ma.SPC -> T396MA.SPC
[sigmove 22:29:21 DEBUG] transformed T396Mb.SPC -> T396MB.SPC
[sigmove 22:29:21 DEBUG] transformed T396Mc.SPC -> T396MC.SPC
[sigmove 22:29:21 DEBUG] transformed T396Md.SPC -> T396MD.SPC
[sigmove 22:29:21 DEBUG] transformed T396Me.SPC -> T396ME.SPC
[sigmove 22:29:21 DEBUG] transformed T396Mf.SPC -> T396MF.SPC
[Status 22:29:21 INFO] data for T396 transferred to science data processing
[Tidy 22:29:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:29:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:29:21 INFO] resetting WatchDogTimer
[Status 22:29:22 INFO] Starting Set [AERI set: name U396, 6 scans, 0 angle, D16300 command]
[Ingest 22:29:22 INFO] Sending XML status message
[Status 22:29:22 INFO] Mirror angle: 0
[Mirror 22:29:22 INFO] rotating to position U
[Status 22:29:23 INFO] .SET file for ACQ96 ready
[Ingest 22:29:23 INFO] Starting acquisition
[Status 22:29:24 INFO] reading housekeeping
[Status 22:29:41 INFO] acquire complete
[Status 22:29:43 INFO] writing housekeeping
[Sequencer 22:29:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:29:43 INFO] incremented U scene to 396 completed views
[Sequencer 22:29:43 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:29:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:29:43 INFO] incremented to [AERI set: name V396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:29:43 INFO] U396.SIG(18)
[sigmove 22:29:43 DEBUG] transformed U396Ma.SPC -> U396MA.SPC
[sigmove 22:29:43 DEBUG] transformed U396Mb.SPC -> U396MB.SPC
[sigmove 22:29:43 DEBUG] transformed U396Mc.SPC -> U396MC.SPC
[sigmove 22:29:43 DEBUG] transformed U396Md.SPC -> U396MD.SPC
[sigmove 22:29:43 DEBUG] transformed U396Me.SPC -> U396ME.SPC
[sigmove 22:29:43 DEBUG] transformed U396Mf.SPC -> U396MF.SPC
[Status 22:29:43 INFO] data for U396 transferred to science data processing
[Tidy 22:29:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:29:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:29:43 INFO] resetting WatchDogTimer
[Status 22:29:43 INFO] Starting Set [AERI set: name V396, 6 scans, 0 angle, D16300 command]
[Ingest 22:29:43 INFO] Sending XML status message
[Status 22:29:43 INFO] Mirror angle: 0
[Mirror 22:29:44 INFO] rotating to position V
[Status 22:29:44 INFO] .SET file for ACQ96 ready
[Ingest 22:29:45 INFO] Starting acquisition
[Status 22:29:45 INFO] reading housekeeping
[Status 22:30:03 INFO] acquire complete
[Status 22:30:04 INFO] writing housekeeping
[Sequencer 22:30:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:30:04 INFO] incremented V scene to 396 completed views
[Sequencer 22:30:04 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:30:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:30:04 INFO] incremented to [AERI set: name W396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:30:04 INFO] V396.SIG(18)
[sigmove 22:30:04 DEBUG] transformed V396Ma.SPC -> V396MA.SPC
[sigmove 22:30:04 DEBUG] transformed V396Mb.SPC -> V396MB.SPC
[sigmove 22:30:04 DEBUG] transformed V396Mc.SPC -> V396MC.SPC
[sigmove 22:30:04 DEBUG] transformed V396Md.SPC -> V396MD.SPC
[sigmove 22:30:04 DEBUG] transformed V396Me.SPC -> V396ME.SPC
[sigmove 22:30:04 DEBUG] transformed V396Mf.SPC -> V396MF.SPC
[Status 22:30:04 INFO] data for V396 transferred to science data processing
[Tidy 22:30:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:30:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:30:04 INFO] resetting WatchDogTimer
[Status 22:30:04 INFO] Starting Set [AERI set: name W396, 6 scans, 0 angle, D16300 command]
[Ingest 22:30:04 INFO] Sending XML status message
[Status 22:30:04 INFO] Mirror angle: 0
[Mirror 22:30:05 INFO] rotating to position W
[Status 22:30:05 INFO] .SET file for ACQ96 ready
[Ingest 22:30:06 INFO] Starting acquisition
[Status 22:30:06 INFO] reading housekeeping
[Status 22:30:24 INFO] acquire complete
[Status 22:30:25 INFO] writing housekeeping
[Sequencer 22:30:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:30:25 INFO] incremented W scene to 396 completed views
[Sequencer 22:30:25 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:30:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:30:25 INFO] incremented to [AERI set: name X396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:30:25 INFO] W396.SIG(18)
[sigmove 22:30:25 DEBUG] transformed W396Ma.SPC -> W396MA.SPC
[sigmove 22:30:25 DEBUG] transformed W396Mb.SPC -> W396MB.SPC
[sigmove 22:30:25 DEBUG] transformed W396Mc.SPC -> W396MC.SPC
[sigmove 22:30:25 DEBUG] transformed W396Md.SPC -> W396MD.SPC
[sigmove 22:30:25 DEBUG] transformed W396Me.SPC -> W396ME.SPC
[sigmove 22:30:25 DEBUG] transformed W396Mf.SPC -> W396MF.SPC
[Status 22:30:25 INFO] data for W396 transferred to science data processing
[Tidy 22:30:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:30:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:30:25 INFO] resetting WatchDogTimer
[Status 22:30:26 INFO] Starting Set [AERI set: name X396, 6 scans, 0 angle, D16300 command]
[Ingest 22:30:26 INFO] Sending XML status message
[Status 22:30:26 INFO] Mirror angle: 0
[Mirror 22:30:26 INFO] rotating to position X
[Status 22:30:27 INFO] .SET file for ACQ96 ready
[Ingest 22:30:27 INFO] Starting acquisition
[Status 22:30:28 INFO] reading housekeeping
[Status 22:30:45 INFO] acquire complete
[Status 22:30:46 INFO] writing housekeeping
[Sequencer 22:30:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:30:46 INFO] incremented X scene to 396 completed views
[Sequencer 22:30:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:30:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:30:46 INFO] incremented to [AERI set: name Y396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:30:46 INFO] X396.SIG(18)
[sigmove 22:30:46 DEBUG] transformed X396Ma.SPC -> X396MA.SPC
[sigmove 22:30:46 DEBUG] transformed X396Mb.SPC -> X396MB.SPC
[sigmove 22:30:46 DEBUG] transformed X396Mc.SPC -> X396MC.SPC
[sigmove 22:30:46 DEBUG] transformed X396Md.SPC -> X396MD.SPC
[sigmove 22:30:46 DEBUG] transformed X396Me.SPC -> X396ME.SPC
[sigmove 22:30:46 DEBUG] transformed X396Mf.SPC -> X396MF.SPC
[Status 22:30:46 INFO] data for X396 transferred to science data processing
[Tidy 22:30:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:30:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:30:46 INFO] resetting WatchDogTimer
[Status 22:30:47 INFO] Starting Set [AERI set: name Y396, 6 scans, 0 angle, D16300 command]
[Ingest 22:30:47 INFO] Sending XML status message
[Status 22:30:47 INFO] Mirror angle: 0
[Mirror 22:30:47 INFO] rotating to position Y
[Status 22:30:48 INFO] .SET file for ACQ96 ready
[Ingest 22:30:48 INFO] Starting acquisition
[Status 22:30:49 INFO] reading housekeeping
[Status 22:31:07 INFO] acquire complete
[Status 22:31:08 INFO] writing housekeeping
[Sequencer 22:31:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:31:08 INFO] incremented Y scene to 396 completed views
[Sequencer 22:31:08 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:31:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:31:08 INFO] incremented to [AERI set: name Z396, 6 scans, 0 angle, D16300 command] set
[sigmove 22:31:08 INFO] Y396.SIG(18)
[sigmove 22:31:08 DEBUG] transformed Y396Ma.SPC -> Y396MA.SPC
[sigmove 22:31:08 DEBUG] transformed Y396Mb.SPC -> Y396MB.SPC
[sigmove 22:31:08 DEBUG] transformed Y396Mc.SPC -> Y396MC.SPC
[sigmove 22:31:08 DEBUG] transformed Y396Md.SPC -> Y396MD.SPC
[sigmove 22:31:08 DEBUG] transformed Y396Me.SPC -> Y396ME.SPC
[sigmove 22:31:08 DEBUG] transformed Y396Mf.SPC -> Y396MF.SPC
[Status 22:31:08 INFO] data for Y396 transferred to science data processing
[Tidy 22:31:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:31:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:31:08 INFO] resetting WatchDogTimer
[Status 22:31:08 INFO] Starting Set [AERI set: name Z396, 6 scans, 0 angle, D16300 command]
[Ingest 22:31:08 INFO] Sending XML status message
[Status 22:31:08 INFO] Mirror angle: 0
[Mirror 22:31:09 INFO] rotating to position Z
[Status 22:31:09 INFO] .SET file for ACQ96 ready
[Ingest 22:31:10 INFO] Starting acquisition
[Status 22:31:10 INFO] reading housekeeping
[Status 22:31:28 INFO] acquire complete
[Status 22:31:29 INFO] writing housekeeping
[Sequencer 22:31:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:31:29 INFO] incremented Z scene to 396 completed views
[Sequencer 22:31:29 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:31:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:31:29 INFO] incremented to [AERI set: name H397, 6 scans, 60 angle, D22500 command] set
[sigmove 22:31:29 INFO] Z396.SIG(18)
[sigmove 22:31:29 DEBUG] transformed Z396Ma.SPC -> Z396MA.SPC
[sigmove 22:31:29 DEBUG] transformed Z396Mb.SPC -> Z396MB.SPC
[sigmove 22:31:29 DEBUG] transformed Z396Mc.SPC -> Z396MC.SPC
[sigmove 22:31:29 DEBUG] transformed Z396Md.SPC -> Z396MD.SPC
[sigmove 22:31:29 DEBUG] transformed Z396Me.SPC -> Z396ME.SPC
[sigmove 22:31:29 DEBUG] transformed Z396Mf.SPC -> Z396MF.SPC
[Status 22:31:29 INFO] data for Z396 transferred to science data processing
[Tidy 22:31:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:31:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:31:29 INFO] resetting WatchDogTimer
[Status 22:31:30 INFO] Starting Set [AERI set: name H397, 6 scans, 60 angle, D22500 command]
[Ingest 22:31:30 INFO] Sending XML status message
[Status 22:31:30 INFO] Mirror angle: 60
[Mirror 22:31:30 INFO] rotating to position H
[Status 22:31:31 INFO] .SET file for ACQ96 ready
[Ingest 22:31:32 INFO] Starting acquisition
[Status 22:31:32 INFO] reading housekeeping
[Status 22:31:50 INFO] acquire complete
[Status 22:31:52 INFO] writing housekeeping
[Sequencer 22:31:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:31:52 INFO] incremented H scene to 397 completed views
[Sequencer 22:31:52 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:31:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:31:52 INFO] incremented to [AERI set: name A397, 6 scans, 120 angle, D28300 command] set
[sigmove 22:31:52 INFO] H397.SIG(18)
[sigmove 22:31:52 DEBUG] transformed H397Ma.SPC -> H397MA.SPC
[sigmove 22:31:52 DEBUG] transformed H397Mb.SPC -> H397MB.SPC
[sigmove 22:31:52 DEBUG] transformed H397Mc.SPC -> H397MC.SPC
[sigmove 22:31:52 DEBUG] transformed H397Md.SPC -> H397MD.SPC
[sigmove 22:31:52 DEBUG] transformed H397Me.SPC -> H397ME.SPC
[sigmove 22:31:52 DEBUG] transformed H397Mf.SPC -> H397MF.SPC
[Status 22:31:52 INFO] data for H397 transferred to science data processing
[Tidy 22:31:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:31:52 INFO] A395.FIN(19),H395.FIN(19),S395.FIN(19),T395.FIN(19),U395.FIN(19),V395.FIN(19),W395.FIN(19),X395.FIN(19),Y395.FIN(19),Z395.FIN(19),A396.FIN(19),H396.FIN(19),S396.FIN(19),T396.FIN(19),U396.FIN(19),V396.FIN(19),W396.FIN(19),X396.FIN(19),Y396.FIN(19),Z396.FIN(19)
[sigmove 22:31:52 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:31:52 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:31:58 DEBUG] done zipping
[WatchDog 22:31:59 INFO] resetting WatchDogTimer
[Status 22:31:59 INFO] Starting Set [AERI set: name A397, 6 scans, 120 angle, D28300 command]
[Ingest 22:31:59 INFO] Sending XML status message
[Status 22:31:59 INFO] Mirror angle: 120
[Mirror 22:32:00 INFO] rotating to position A
[Status 22:32:01 INFO] .SET file for ACQ96 ready
[Ingest 22:32:01 INFO] Starting acquisition
[Status 22:32:02 INFO] reading housekeeping
[Status 22:32:19 INFO] acquire complete
[Status 22:32:21 INFO] writing housekeeping
[Sequencer 22:32:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:32:21 INFO] incremented A scene to 397 completed views
[Sequencer 22:32:21 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:32:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:32:21 INFO] incremented to [AERI set: name S397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:32:21 INFO] A397.SIG(18)
[sigmove 22:32:21 DEBUG] transformed A397Ma.SPC -> A397MA.SPC
[sigmove 22:32:21 DEBUG] transformed A397Mb.SPC -> A397MB.SPC
[sigmove 22:32:21 DEBUG] transformed A397Mc.SPC -> A397MC.SPC
[sigmove 22:32:21 DEBUG] transformed A397Md.SPC -> A397MD.SPC
[sigmove 22:32:21 DEBUG] transformed A397Me.SPC -> A397ME.SPC
[sigmove 22:32:21 DEBUG] transformed A397Mf.SPC -> A397MF.SPC
[Status 22:32:21 INFO] data for A397 transferred to science data processing
[Tidy 22:32:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:32:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:32:21 INFO] resetting WatchDogTimer
[Status 22:32:21 INFO] Starting Set [AERI set: name S397, 6 scans, 0 angle, D16300 command]
[Ingest 22:32:21 INFO] Sending XML status message
[Status 22:32:21 INFO] Mirror angle: 0
[Mirror 22:32:22 INFO] rotating to position S
[Status 22:32:23 INFO] .SET file for ACQ96 ready
[Ingest 22:32:24 INFO] Starting acquisition
[Status 22:32:24 INFO] reading housekeeping
[Status 22:32:42 INFO] acquire complete
[Status 22:32:43 INFO] writing housekeeping
[Sequencer 22:32:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:32:43 INFO] incremented S scene to 397 completed views
[Sequencer 22:32:43 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:32:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:32:43 INFO] incremented to [AERI set: name T397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:32:43 INFO] S397.SIG(18)
[sigmove 22:32:43 DEBUG] transformed S397Ma.SPC -> S397MA.SPC
[sigmove 22:32:43 DEBUG] transformed S397Mb.SPC -> S397MB.SPC
[sigmove 22:32:43 DEBUG] transformed S397Mc.SPC -> S397MC.SPC
[sigmove 22:32:43 DEBUG] transformed S397Md.SPC -> S397MD.SPC
[sigmove 22:32:43 DEBUG] transformed S397Me.SPC -> S397ME.SPC
[sigmove 22:32:43 DEBUG] transformed S397Mf.SPC -> S397MF.SPC
[Status 22:32:43 INFO] data for S397 transferred to science data processing
[Tidy 22:32:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:32:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:32:43 INFO] resetting WatchDogTimer
[Status 22:32:44 INFO] Starting Set [AERI set: name T397, 6 scans, 0 angle, D16300 command]
[Ingest 22:32:44 INFO] Sending XML status message
[Status 22:32:44 INFO] Mirror angle: 0
[Mirror 22:32:44 INFO] rotating to position T
[Status 22:32:45 INFO] .SET file for ACQ96 ready
[Ingest 22:32:45 INFO] Starting acquisition
[Status 22:32:46 INFO] reading housekeeping
[Status 22:33:03 INFO] acquire complete
[Status 22:33:04 INFO] writing housekeeping
[Sequencer 22:33:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:33:04 INFO] incremented T scene to 397 completed views
[Sequencer 22:33:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:33:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:33:04 INFO] incremented to [AERI set: name U397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:33:04 INFO] T397.SIG(18)
[sigmove 22:33:04 DEBUG] transformed T397Ma.SPC -> T397MA.SPC
[sigmove 22:33:04 DEBUG] transformed T397Mb.SPC -> T397MB.SPC
[sigmove 22:33:04 DEBUG] transformed T397Mc.SPC -> T397MC.SPC
[sigmove 22:33:04 DEBUG] transformed T397Md.SPC -> T397MD.SPC
[sigmove 22:33:04 DEBUG] transformed T397Me.SPC -> T397ME.SPC
[sigmove 22:33:04 DEBUG] transformed T397Mf.SPC -> T397MF.SPC
[Status 22:33:04 INFO] data for T397 transferred to science data processing
[Tidy 22:33:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:33:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:33:04 INFO] resetting WatchDogTimer
[Status 22:33:05 INFO] Starting Set [AERI set: name U397, 6 scans, 0 angle, D16300 command]
[Ingest 22:33:05 INFO] Sending XML status message
[Status 22:33:05 INFO] Mirror angle: 0
[Mirror 22:33:05 INFO] rotating to position U
[Status 22:33:06 INFO] .SET file for ACQ96 ready
[Ingest 22:33:07 INFO] Starting acquisition
[Status 22:33:07 INFO] reading housekeeping
[Status 22:33:25 INFO] acquire complete
[Status 22:33:26 INFO] writing housekeeping
[Sequencer 22:33:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:33:26 INFO] incremented U scene to 397 completed views
[Sequencer 22:33:26 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:33:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:33:26 INFO] incremented to [AERI set: name V397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:33:26 INFO] U397.SIG(18)
[sigmove 22:33:26 DEBUG] transformed U397Ma.SPC -> U397MA.SPC
[sigmove 22:33:26 DEBUG] transformed U397Mb.SPC -> U397MB.SPC
[sigmove 22:33:26 DEBUG] transformed U397Mc.SPC -> U397MC.SPC
[sigmove 22:33:26 DEBUG] transformed U397Md.SPC -> U397MD.SPC
[sigmove 22:33:26 DEBUG] transformed U397Me.SPC -> U397ME.SPC
[sigmove 22:33:26 DEBUG] transformed U397Mf.SPC -> U397MF.SPC
[Status 22:33:26 INFO] data for U397 transferred to science data processing
[Tidy 22:33:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:33:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:33:26 INFO] resetting WatchDogTimer
[Status 22:33:26 INFO] Starting Set [AERI set: name V397, 6 scans, 0 angle, D16300 command]
[Ingest 22:33:26 INFO] Sending XML status message
[Status 22:33:26 INFO] Mirror angle: 0
[Mirror 22:33:27 INFO] rotating to position V
[Status 22:33:27 INFO] .SET file for ACQ96 ready
[Ingest 22:33:28 INFO] Starting acquisition
[Status 22:33:28 INFO] reading housekeeping
[Status 22:33:46 INFO] acquire complete
[Status 22:33:47 INFO] writing housekeeping
[Sequencer 22:33:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:33:47 INFO] incremented V scene to 397 completed views
[Sequencer 22:33:47 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:33:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:33:47 INFO] incremented to [AERI set: name W397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:33:47 INFO] V397.SIG(18)
[sigmove 22:33:47 DEBUG] transformed V397Ma.SPC -> V397MA.SPC
[sigmove 22:33:47 DEBUG] transformed V397Mb.SPC -> V397MB.SPC
[sigmove 22:33:47 DEBUG] transformed V397Mc.SPC -> V397MC.SPC
[sigmove 22:33:47 DEBUG] transformed V397Md.SPC -> V397MD.SPC
[sigmove 22:33:47 DEBUG] transformed V397Me.SPC -> V397ME.SPC
[sigmove 22:33:47 DEBUG] transformed V397Mf.SPC -> V397MF.SPC
[Status 22:33:47 INFO] data for V397 transferred to science data processing
[Tidy 22:33:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:33:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:33:47 INFO] resetting WatchDogTimer
[Status 22:33:48 INFO] Starting Set [AERI set: name W397, 6 scans, 0 angle, D16300 command]
[Ingest 22:33:48 INFO] Sending XML status message
[Status 22:33:48 INFO] Mirror angle: 0
[Mirror 22:33:48 INFO] rotating to position W
[Status 22:33:49 INFO] .SET file for ACQ96 ready
[Ingest 22:33:49 INFO] Starting acquisition
[Status 22:33:50 INFO] reading housekeeping
[Status 22:34:07 INFO] acquire complete
[Status 22:34:08 INFO] writing housekeeping
[Sequencer 22:34:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:34:08 INFO] incremented W scene to 397 completed views
[Sequencer 22:34:08 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:34:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:34:08 INFO] incremented to [AERI set: name X397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:34:08 INFO] W397.SIG(18)
[sigmove 22:34:08 DEBUG] transformed W397Ma.SPC -> W397MA.SPC
[sigmove 22:34:08 DEBUG] transformed W397Mb.SPC -> W397MB.SPC
[sigmove 22:34:08 DEBUG] transformed W397Mc.SPC -> W397MC.SPC
[sigmove 22:34:08 DEBUG] transformed W397Md.SPC -> W397MD.SPC
[sigmove 22:34:08 DEBUG] transformed W397Me.SPC -> W397ME.SPC
[sigmove 22:34:08 DEBUG] transformed W397Mf.SPC -> W397MF.SPC
[Status 22:34:08 INFO] data for W397 transferred to science data processing
[Tidy 22:34:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:34:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:34:08 INFO] resetting WatchDogTimer
[Status 22:34:09 INFO] Starting Set [AERI set: name X397, 6 scans, 0 angle, D16300 command]
[Ingest 22:34:09 INFO] Sending XML status message
[Status 22:34:09 INFO] Mirror angle: 0
[Mirror 22:34:09 INFO] rotating to position X
[Status 22:34:10 INFO] .SET file for ACQ96 ready
[Ingest 22:34:10 INFO] Starting acquisition
[Status 22:34:11 INFO] reading housekeeping
[Status 22:34:28 INFO] acquire complete
[Status 22:34:30 INFO] writing housekeeping
[Sequencer 22:34:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:34:30 INFO] incremented X scene to 397 completed views
[Sequencer 22:34:30 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:34:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:34:30 INFO] incremented to [AERI set: name Y397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:34:30 INFO] X397.SIG(18)
[sigmove 22:34:30 DEBUG] transformed X397Ma.SPC -> X397MA.SPC
[sigmove 22:34:30 DEBUG] transformed X397Mb.SPC -> X397MB.SPC
[sigmove 22:34:30 DEBUG] transformed X397Mc.SPC -> X397MC.SPC
[sigmove 22:34:30 DEBUG] transformed X397Md.SPC -> X397MD.SPC
[sigmove 22:34:30 DEBUG] transformed X397Me.SPC -> X397ME.SPC
[sigmove 22:34:30 DEBUG] transformed X397Mf.SPC -> X397MF.SPC
[Status 22:34:30 INFO] data for X397 transferred to science data processing
[Tidy 22:34:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:34:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:34:30 INFO] resetting WatchDogTimer
[Status 22:34:30 INFO] Starting Set [AERI set: name Y397, 6 scans, 0 angle, D16300 command]
[Ingest 22:34:30 INFO] Sending XML status message
[Status 22:34:30 INFO] Mirror angle: 0
[Mirror 22:34:31 INFO] rotating to position Y
[Status 22:34:31 INFO] .SET file for ACQ96 ready
[Ingest 22:34:32 INFO] Starting acquisition
[Status 22:34:32 INFO] reading housekeeping
[Status 22:34:50 INFO] acquire complete
[Status 22:34:51 INFO] writing housekeeping
[Sequencer 22:34:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:34:51 INFO] incremented Y scene to 397 completed views
[Sequencer 22:34:51 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:34:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:34:51 INFO] incremented to [AERI set: name Z397, 6 scans, 0 angle, D16300 command] set
[sigmove 22:34:51 INFO] Y397.SIG(18)
[sigmove 22:34:51 DEBUG] transformed Y397Ma.SPC -> Y397MA.SPC
[sigmove 22:34:51 DEBUG] transformed Y397Mb.SPC -> Y397MB.SPC
[sigmove 22:34:51 DEBUG] transformed Y397Mc.SPC -> Y397MC.SPC
[sigmove 22:34:51 DEBUG] transformed Y397Md.SPC -> Y397MD.SPC
[sigmove 22:34:51 DEBUG] transformed Y397Me.SPC -> Y397ME.SPC
[sigmove 22:34:51 DEBUG] transformed Y397Mf.SPC -> Y397MF.SPC
[Status 22:34:51 INFO] data for Y397 transferred to science data processing
[Tidy 22:34:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:34:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:34:51 INFO] resetting WatchDogTimer
[Status 22:34:52 INFO] Starting Set [AERI set: name Z397, 6 scans, 0 angle, D16300 command]
[Ingest 22:34:52 INFO] Sending XML status message
[Status 22:34:52 INFO] Mirror angle: 0
[Mirror 22:34:52 INFO] rotating to position Z
[Status 22:34:53 INFO] .SET file for ACQ96 ready
[Ingest 22:34:53 INFO] Starting acquisition
[Status 22:34:54 INFO] reading housekeeping
[Status 22:35:11 INFO] acquire complete
[Status 22:35:12 INFO] writing housekeeping
[Sequencer 22:35:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:35:12 INFO] incremented Z scene to 397 completed views
[Sequencer 22:35:12 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:35:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:35:12 INFO] incremented to [AERI set: name A398, 6 scans, 120 angle, D28300 command] set
[sigmove 22:35:12 INFO] Z397.SIG(18)
[sigmove 22:35:12 DEBUG] transformed Z397Ma.SPC -> Z397MA.SPC
[sigmove 22:35:12 DEBUG] transformed Z397Mb.SPC -> Z397MB.SPC
[sigmove 22:35:12 DEBUG] transformed Z397Mc.SPC -> Z397MC.SPC
[sigmove 22:35:12 DEBUG] transformed Z397Md.SPC -> Z397MD.SPC
[sigmove 22:35:12 DEBUG] transformed Z397Me.SPC -> Z397ME.SPC
[sigmove 22:35:12 DEBUG] transformed Z397Mf.SPC -> Z397MF.SPC
[Status 22:35:12 INFO] data for Z397 transferred to science data processing
[Tidy 22:35:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:35:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:35:12 INFO] resetting WatchDogTimer
[Status 22:35:13 INFO] Starting Set [AERI set: name A398, 6 scans, 120 angle, D28300 command]
[Ingest 22:35:13 INFO] Sending XML status message
[Status 22:35:13 INFO] Mirror angle: 120
[Mirror 22:35:13 INFO] rotating to position A
[Status 22:35:15 INFO] .SET file for ACQ96 ready
[Ingest 22:35:15 INFO] Starting acquisition
[Status 22:35:16 INFO] reading housekeeping
[Status 22:35:34 INFO] acquire complete
[Status 22:35:35 INFO] writing housekeeping
[Sequencer 22:35:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:35:35 INFO] incremented A scene to 398 completed views
[Sequencer 22:35:35 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:35:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:35:35 INFO] incremented to [AERI set: name H398, 6 scans, 60 angle, D22500 command] set
[sigmove 22:35:35 INFO] A398.SIG(18)
[sigmove 22:35:35 DEBUG] transformed A398Ma.SPC -> A398MA.SPC
[sigmove 22:35:35 DEBUG] transformed A398Mb.SPC -> A398MB.SPC
[sigmove 22:35:35 DEBUG] transformed A398Mc.SPC -> A398MC.SPC
[sigmove 22:35:35 DEBUG] transformed A398Md.SPC -> A398MD.SPC
[sigmove 22:35:35 DEBUG] transformed A398Me.SPC -> A398ME.SPC
[sigmove 22:35:35 DEBUG] transformed A398Mf.SPC -> A398MF.SPC
[Status 22:35:35 INFO] data for A398 transferred to science data processing
[Tidy 22:35:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:35:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:35:35 INFO] resetting WatchDogTimer
[Status 22:35:35 INFO] Starting Set [AERI set: name H398, 6 scans, 60 angle, D22500 command]
[Ingest 22:35:35 INFO] Sending XML status message
[Status 22:35:35 INFO] Mirror angle: 60
[Mirror 22:35:36 INFO] rotating to position H
[Status 22:35:37 INFO] .SET file for ACQ96 ready
[Ingest 22:35:37 INFO] Starting acquisition
[Status 22:35:38 INFO] reading housekeeping
[Status 22:35:56 INFO] acquire complete
[Status 22:35:57 INFO] writing housekeeping
[Sequencer 22:35:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:35:57 INFO] incremented H scene to 398 completed views
[Sequencer 22:35:57 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:35:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:35:57 INFO] incremented to [AERI set: name S398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:35:57 INFO] H398.SIG(18)
[sigmove 22:35:57 DEBUG] transformed H398Ma.SPC -> H398MA.SPC
[sigmove 22:35:57 DEBUG] transformed H398Mb.SPC -> H398MB.SPC
[sigmove 22:35:57 DEBUG] transformed H398Mc.SPC -> H398MC.SPC
[sigmove 22:35:57 DEBUG] transformed H398Md.SPC -> H398MD.SPC
[sigmove 22:35:57 DEBUG] transformed H398Me.SPC -> H398ME.SPC
[sigmove 22:35:57 DEBUG] transformed H398Mf.SPC -> H398MF.SPC
[Status 22:35:57 INFO] data for H398 transferred to science data processing
[Tidy 22:35:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:35:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:35:57 INFO] resetting WatchDogTimer
[Status 22:35:58 INFO] Starting Set [AERI set: name S398, 6 scans, 0 angle, D16300 command]
[Ingest 22:35:58 INFO] Sending XML status message
[Status 22:35:58 INFO] Mirror angle: 0
[Mirror 22:35:58 INFO] rotating to position S
[Status 22:35:59 INFO] .SET file for ACQ96 ready
[Ingest 22:36:00 INFO] Starting acquisition
[Status 22:36:01 INFO] reading housekeeping
[Status 22:36:18 INFO] acquire complete
[Status 22:36:20 INFO] writing housekeeping
[Sequencer 22:36:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:36:20 INFO] incremented S scene to 398 completed views
[Sequencer 22:36:20 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:36:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:36:20 INFO] incremented to [AERI set: name T398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:36:20 INFO] S398.SIG(18)
[sigmove 22:36:20 DEBUG] transformed S398Ma.SPC -> S398MA.SPC
[sigmove 22:36:20 DEBUG] transformed S398Mb.SPC -> S398MB.SPC
[sigmove 22:36:20 DEBUG] transformed S398Mc.SPC -> S398MC.SPC
[sigmove 22:36:20 DEBUG] transformed S398Md.SPC -> S398MD.SPC
[sigmove 22:36:20 DEBUG] transformed S398Me.SPC -> S398ME.SPC
[sigmove 22:36:20 DEBUG] transformed S398Mf.SPC -> S398MF.SPC
[Status 22:36:20 INFO] data for S398 transferred to science data processing
[Tidy 22:36:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:36:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:36:20 INFO] resetting WatchDogTimer
[Status 22:36:20 INFO] Starting Set [AERI set: name T398, 6 scans, 0 angle, D16300 command]
[Ingest 22:36:20 INFO] Sending XML status message
[Status 22:36:20 INFO] Mirror angle: 0
[Mirror 22:36:21 INFO] rotating to position T
[Status 22:36:21 INFO] .SET file for ACQ96 ready
[Ingest 22:36:22 INFO] Starting acquisition
[Status 22:36:22 INFO] reading housekeeping
[Status 22:36:40 INFO] acquire complete
[Status 22:36:41 INFO] writing housekeeping
[Sequencer 22:36:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:36:41 INFO] incremented T scene to 398 completed views
[Sequencer 22:36:41 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:36:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:36:41 INFO] incremented to [AERI set: name U398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:36:41 INFO] T398.SIG(18)
[sigmove 22:36:41 DEBUG] transformed T398Ma.SPC -> T398MA.SPC
[sigmove 22:36:41 DEBUG] transformed T398Mb.SPC -> T398MB.SPC
[sigmove 22:36:41 DEBUG] transformed T398Mc.SPC -> T398MC.SPC
[sigmove 22:36:41 DEBUG] transformed T398Md.SPC -> T398MD.SPC
[sigmove 22:36:41 DEBUG] transformed T398Me.SPC -> T398ME.SPC
[sigmove 22:36:41 DEBUG] transformed T398Mf.SPC -> T398MF.SPC
[Status 22:36:41 INFO] data for T398 transferred to science data processing
[Tidy 22:36:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:36:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:36:41 INFO] resetting WatchDogTimer
[Status 22:36:41 INFO] Starting Set [AERI set: name U398, 6 scans, 0 angle, D16300 command]
[Ingest 22:36:41 INFO] Sending XML status message
[Status 22:36:41 INFO] Mirror angle: 0
[Mirror 22:36:42 INFO] rotating to position U
[Status 22:36:43 INFO] .SET file for ACQ96 ready
[Ingest 22:36:43 INFO] Starting acquisition
[Status 22:36:44 INFO] reading housekeeping
[Status 22:37:01 INFO] acquire complete
[Status 22:37:02 INFO] writing housekeeping
[Sequencer 22:37:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:37:02 INFO] incremented U scene to 398 completed views
[Sequencer 22:37:02 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:37:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:37:02 INFO] incremented to [AERI set: name V398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:37:02 INFO] U398.SIG(18)
[sigmove 22:37:02 DEBUG] transformed U398Ma.SPC -> U398MA.SPC
[sigmove 22:37:02 DEBUG] transformed U398Mb.SPC -> U398MB.SPC
[sigmove 22:37:02 DEBUG] transformed U398Mc.SPC -> U398MC.SPC
[sigmove 22:37:02 DEBUG] transformed U398Md.SPC -> U398MD.SPC
[sigmove 22:37:02 DEBUG] transformed U398Me.SPC -> U398ME.SPC
[sigmove 22:37:02 DEBUG] transformed U398Mf.SPC -> U398MF.SPC
[Status 22:37:02 INFO] data for U398 transferred to science data processing
[Tidy 22:37:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:37:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:37:02 INFO] resetting WatchDogTimer
[Status 22:37:03 INFO] Starting Set [AERI set: name V398, 6 scans, 0 angle, D16300 command]
[Ingest 22:37:03 INFO] Sending XML status message
[Status 22:37:03 INFO] Mirror angle: 0
[Mirror 22:37:03 INFO] rotating to position V
[Status 22:37:04 INFO] .SET file for ACQ96 ready
[Ingest 22:37:04 INFO] Starting acquisition
[Status 22:37:05 INFO] reading housekeeping
[Status 22:37:22 INFO] acquire complete
[Status 22:37:24 INFO] writing housekeeping
[Sequencer 22:37:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:37:24 INFO] incremented V scene to 398 completed views
[Sequencer 22:37:24 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:37:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:37:24 INFO] incremented to [AERI set: name W398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:37:24 INFO] V398.SIG(18)
[sigmove 22:37:24 DEBUG] transformed V398Ma.SPC -> V398MA.SPC
[sigmove 22:37:24 DEBUG] transformed V398Mb.SPC -> V398MB.SPC
[sigmove 22:37:24 DEBUG] transformed V398Mc.SPC -> V398MC.SPC
[sigmove 22:37:24 DEBUG] transformed V398Md.SPC -> V398MD.SPC
[sigmove 22:37:24 DEBUG] transformed V398Me.SPC -> V398ME.SPC
[sigmove 22:37:24 DEBUG] transformed V398Mf.SPC -> V398MF.SPC
[Status 22:37:24 INFO] data for V398 transferred to science data processing
[Tidy 22:37:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:37:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:37:24 INFO] resetting WatchDogTimer
[Status 22:37:24 INFO] Starting Set [AERI set: name W398, 6 scans, 0 angle, D16300 command]
[Ingest 22:37:24 INFO] Sending XML status message
[Status 22:37:24 INFO] Mirror angle: 0
[Mirror 22:37:25 INFO] rotating to position W
[Status 22:37:25 INFO] .SET file for ACQ96 ready
[Ingest 22:37:26 INFO] Starting acquisition
[Status 22:37:26 INFO] reading housekeeping
[Status 22:37:44 INFO] acquire complete
[Status 22:37:45 INFO] writing housekeeping
[Sequencer 22:37:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:37:45 INFO] incremented W scene to 398 completed views
[Sequencer 22:37:45 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:37:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:37:45 INFO] incremented to [AERI set: name X398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:37:45 INFO] W398.SIG(18)
[sigmove 22:37:45 DEBUG] transformed W398Ma.SPC -> W398MA.SPC
[sigmove 22:37:45 DEBUG] transformed W398Mb.SPC -> W398MB.SPC
[sigmove 22:37:45 DEBUG] transformed W398Mc.SPC -> W398MC.SPC
[sigmove 22:37:45 DEBUG] transformed W398Md.SPC -> W398MD.SPC
[sigmove 22:37:45 DEBUG] transformed W398Me.SPC -> W398ME.SPC
[sigmove 22:37:45 DEBUG] transformed W398Mf.SPC -> W398MF.SPC
[Status 22:37:45 INFO] data for W398 transferred to science data processing
[Tidy 22:37:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:37:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:37:45 INFO] resetting WatchDogTimer
[Status 22:37:45 INFO] Starting Set [AERI set: name X398, 6 scans, 0 angle, D16300 command]
[Ingest 22:37:45 INFO] Sending XML status message
[Status 22:37:45 INFO] Mirror angle: 0
[Mirror 22:37:46 INFO] rotating to position X
[Status 22:37:47 INFO] .SET file for ACQ96 ready
[Ingest 22:37:47 INFO] Starting acquisition
[Status 22:37:48 INFO] reading housekeeping
[Status 22:38:05 INFO] acquire complete
[Status 22:38:06 INFO] writing housekeeping
[Sequencer 22:38:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:38:06 INFO] incremented X scene to 398 completed views
[Sequencer 22:38:06 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:38:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:38:06 INFO] incremented to [AERI set: name Y398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:38:06 INFO] X398.SIG(18)
[sigmove 22:38:06 DEBUG] transformed X398Ma.SPC -> X398MA.SPC
[sigmove 22:38:06 DEBUG] transformed X398Mb.SPC -> X398MB.SPC
[sigmove 22:38:06 DEBUG] transformed X398Mc.SPC -> X398MC.SPC
[sigmove 22:38:06 DEBUG] transformed X398Md.SPC -> X398MD.SPC
[sigmove 22:38:06 DEBUG] transformed X398Me.SPC -> X398ME.SPC
[sigmove 22:38:06 DEBUG] transformed X398Mf.SPC -> X398MF.SPC
[Status 22:38:06 INFO] data for X398 transferred to science data processing
[Tidy 22:38:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:38:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:38:06 INFO] resetting WatchDogTimer
[Status 22:38:07 INFO] Starting Set [AERI set: name Y398, 6 scans, 0 angle, D16300 command]
[Ingest 22:38:07 INFO] Sending XML status message
[Status 22:38:07 INFO] Mirror angle: 0
[Mirror 22:38:07 INFO] rotating to position Y
[Status 22:38:08 INFO] .SET file for ACQ96 ready
[Ingest 22:38:08 INFO] Starting acquisition
[Status 22:38:09 INFO] reading housekeeping
[Status 22:38:26 INFO] acquire complete
[Status 22:38:28 INFO] writing housekeeping
[Sequencer 22:38:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:38:28 INFO] incremented Y scene to 398 completed views
[Sequencer 22:38:28 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:38:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:38:28 INFO] incremented to [AERI set: name Z398, 6 scans, 0 angle, D16300 command] set
[sigmove 22:38:28 INFO] Y398.SIG(18)
[sigmove 22:38:28 DEBUG] transformed Y398Ma.SPC -> Y398MA.SPC
[sigmove 22:38:28 DEBUG] transformed Y398Mb.SPC -> Y398MB.SPC
[sigmove 22:38:28 DEBUG] transformed Y398Mc.SPC -> Y398MC.SPC
[sigmove 22:38:28 DEBUG] transformed Y398Md.SPC -> Y398MD.SPC
[sigmove 22:38:28 DEBUG] transformed Y398Me.SPC -> Y398ME.SPC
[sigmove 22:38:28 DEBUG] transformed Y398Mf.SPC -> Y398MF.SPC
[Status 22:38:28 INFO] data for Y398 transferred to science data processing
[Tidy 22:38:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:38:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:38:28 INFO] resetting WatchDogTimer
[Status 22:38:28 INFO] Starting Set [AERI set: name Z398, 6 scans, 0 angle, D16300 command]
[Ingest 22:38:28 INFO] Sending XML status message
[Status 22:38:28 INFO] Mirror angle: 0
[Mirror 22:38:29 INFO] rotating to position Z
[Status 22:38:29 INFO] .SET file for ACQ96 ready
[Ingest 22:38:30 INFO] Starting acquisition
[Status 22:38:30 INFO] reading housekeeping
[Status 22:38:48 INFO] acquire complete
[Status 22:38:49 INFO] writing housekeeping
[Sequencer 22:38:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:38:49 INFO] incremented Z scene to 398 completed views
[Sequencer 22:38:49 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:38:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:38:49 INFO] incremented to [AERI set: name H399, 6 scans, 60 angle, D22500 command] set
[sigmove 22:38:49 INFO] Z398.SIG(18)
[sigmove 22:38:49 DEBUG] transformed Z398Ma.SPC -> Z398MA.SPC
[sigmove 22:38:49 DEBUG] transformed Z398Mb.SPC -> Z398MB.SPC
[sigmove 22:38:49 DEBUG] transformed Z398Mc.SPC -> Z398MC.SPC
[sigmove 22:38:49 DEBUG] transformed Z398Md.SPC -> Z398MD.SPC
[sigmove 22:38:49 DEBUG] transformed Z398Me.SPC -> Z398ME.SPC
[sigmove 22:38:49 DEBUG] transformed Z398Mf.SPC -> Z398MF.SPC
[Status 22:38:49 INFO] data for Z398 transferred to science data processing
[Tidy 22:38:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:38:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:38:49 INFO] resetting WatchDogTimer
[Status 22:38:49 INFO] Starting Set [AERI set: name H399, 6 scans, 60 angle, D22500 command]
[Ingest 22:38:49 INFO] Sending XML status message
[Status 22:38:49 INFO] Mirror angle: 60
[Mirror 22:38:50 INFO] rotating to position H
[Status 22:38:51 INFO] .SET file for ACQ96 ready
[Ingest 22:38:51 INFO] Starting acquisition
[Status 22:38:52 INFO] reading housekeeping
[Status 22:39:10 INFO] acquire complete
[Status 22:39:11 INFO] writing housekeeping
[Sequencer 22:39:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:39:11 INFO] incremented H scene to 399 completed views
[Sequencer 22:39:11 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:39:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:39:11 INFO] incremented to [AERI set: name A399, 6 scans, 120 angle, D28300 command] set
[sigmove 22:39:11 INFO] H399.SIG(18)
[sigmove 22:39:11 DEBUG] transformed H399Ma.SPC -> H399MA.SPC
[sigmove 22:39:11 DEBUG] transformed H399Mb.SPC -> H399MB.SPC
[sigmove 22:39:11 DEBUG] transformed H399Mc.SPC -> H399MC.SPC
[sigmove 22:39:11 DEBUG] transformed H399Md.SPC -> H399MD.SPC
[sigmove 22:39:11 DEBUG] transformed H399Me.SPC -> H399ME.SPC
[sigmove 22:39:11 DEBUG] transformed H399Mf.SPC -> H399MF.SPC
[Status 22:39:11 INFO] data for H399 transferred to science data processing
[Tidy 22:39:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:39:12 INFO] A397.FIN(19),H397.FIN(19),S397.FIN(19),T397.FIN(19),U397.FIN(19),V397.FIN(19),W397.FIN(19),X397.FIN(19),Y397.FIN(19),Z397.FIN(19),A398.FIN(19),H398.FIN(19),S398.FIN(19),T398.FIN(19),U398.FIN(19),V398.FIN(19),W398.FIN(19),X398.FIN(19),Y398.FIN(19),Z398.FIN(19)
[sigmove 22:39:12 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:39:12 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:39:19 DEBUG] done zipping
[WatchDog 22:39:19 INFO] resetting WatchDogTimer
[Status 22:39:20 INFO] Starting Set [AERI set: name A399, 6 scans, 120 angle, D28300 command]
[Ingest 22:39:20 INFO] Sending XML status message
[Status 22:39:20 INFO] Mirror angle: 120
[Mirror 22:39:20 INFO] rotating to position A
[Status 22:39:21 INFO] .SET file for ACQ96 ready
[Ingest 22:39:22 INFO] Starting acquisition
[Status 22:39:22 INFO] reading housekeeping
[Status 22:39:39 INFO] acquire complete
[Status 22:39:40 INFO] writing housekeeping
[Sequencer 22:39:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:39:40 INFO] incremented A scene to 399 completed views
[Sequencer 22:39:40 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:39:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:39:40 INFO] incremented to [AERI set: name S399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:39:40 INFO] A399.SIG(18)
[sigmove 22:39:40 DEBUG] transformed A399Ma.SPC -> A399MA.SPC
[sigmove 22:39:40 DEBUG] transformed A399Mb.SPC -> A399MB.SPC
[sigmove 22:39:40 DEBUG] transformed A399Mc.SPC -> A399MC.SPC
[sigmove 22:39:40 DEBUG] transformed A399Md.SPC -> A399MD.SPC
[sigmove 22:39:40 DEBUG] transformed A399Me.SPC -> A399ME.SPC
[sigmove 22:39:40 DEBUG] transformed A399Mf.SPC -> A399MF.SPC
[Status 22:39:40 INFO] data for A399 transferred to science data processing
[Tidy 22:39:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:39:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:39:40 INFO] resetting WatchDogTimer
[Status 22:39:41 INFO] Starting Set [AERI set: name S399, 6 scans, 0 angle, D16300 command]
[Ingest 22:39:41 INFO] Sending XML status message
[Status 22:39:41 INFO] Mirror angle: 0
[Mirror 22:39:41 INFO] rotating to position S
[Status 22:39:43 INFO] .SET file for ACQ96 ready
[Ingest 22:39:43 INFO] Starting acquisition
[Status 22:39:44 INFO] reading housekeeping
[Status 22:40:02 INFO] acquire complete
[Status 22:40:03 INFO] writing housekeeping
[Sequencer 22:40:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:40:03 INFO] incremented S scene to 399 completed views
[Sequencer 22:40:03 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:40:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:40:03 INFO] incremented to [AERI set: name T399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:40:03 INFO] S399.SIG(18)
[sigmove 22:40:03 DEBUG] transformed S399Ma.SPC -> S399MA.SPC
[sigmove 22:40:03 DEBUG] transformed S399Mb.SPC -> S399MB.SPC
[sigmove 22:40:03 DEBUG] transformed S399Mc.SPC -> S399MC.SPC
[sigmove 22:40:03 DEBUG] transformed S399Md.SPC -> S399MD.SPC
[sigmove 22:40:03 DEBUG] transformed S399Me.SPC -> S399ME.SPC
[sigmove 22:40:03 DEBUG] transformed S399Mf.SPC -> S399MF.SPC
[Status 22:40:03 INFO] data for S399 transferred to science data processing
[Tidy 22:40:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:40:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:40:03 INFO] resetting WatchDogTimer
[Status 22:40:03 INFO] Starting Set [AERI set: name T399, 6 scans, 0 angle, D16300 command]
[Ingest 22:40:03 INFO] Sending XML status message
[Status 22:40:03 INFO] Mirror angle: 0
[Mirror 22:40:04 INFO] rotating to position T
[Status 22:40:05 INFO] .SET file for ACQ96 ready
[Ingest 22:40:05 INFO] Starting acquisition
[Status 22:40:06 INFO] reading housekeeping
[Status 22:40:23 INFO] acquire complete
[Status 22:40:24 INFO] writing housekeeping
[Sequencer 22:40:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:40:24 INFO] incremented T scene to 399 completed views
[Sequencer 22:40:24 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:40:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:40:24 INFO] incremented to [AERI set: name U399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:40:24 INFO] T399.SIG(18)
[sigmove 22:40:24 DEBUG] transformed T399Ma.SPC -> T399MA.SPC
[sigmove 22:40:24 DEBUG] transformed T399Mb.SPC -> T399MB.SPC
[sigmove 22:40:24 DEBUG] transformed T399Mc.SPC -> T399MC.SPC
[sigmove 22:40:24 DEBUG] transformed T399Md.SPC -> T399MD.SPC
[sigmove 22:40:24 DEBUG] transformed T399Me.SPC -> T399ME.SPC
[sigmove 22:40:24 DEBUG] transformed T399Mf.SPC -> T399MF.SPC
[Status 22:40:24 INFO] data for T399 transferred to science data processing
[Tidy 22:40:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:40:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:40:24 INFO] resetting WatchDogTimer
[Status 22:40:25 INFO] Starting Set [AERI set: name U399, 6 scans, 0 angle, D16300 command]
[Ingest 22:40:25 INFO] Sending XML status message
[Status 22:40:25 INFO] Mirror angle: 0
[Mirror 22:40:25 INFO] rotating to position U
[Status 22:40:26 INFO] .SET file for ACQ96 ready
[Ingest 22:40:26 INFO] Starting acquisition
[Status 22:40:28 INFO] reading housekeeping
[Status 22:40:44 INFO] acquire complete
[Status 22:40:46 INFO] writing housekeeping
[Sequencer 22:40:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:40:46 INFO] incremented U scene to 399 completed views
[Sequencer 22:40:46 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:40:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:40:46 INFO] incremented to [AERI set: name V399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:40:46 INFO] U399.SIG(18)
[sigmove 22:40:46 DEBUG] transformed U399Ma.SPC -> U399MA.SPC
[sigmove 22:40:46 DEBUG] transformed U399Mb.SPC -> U399MB.SPC
[sigmove 22:40:46 DEBUG] transformed U399Mc.SPC -> U399MC.SPC
[sigmove 22:40:46 DEBUG] transformed U399Md.SPC -> U399MD.SPC
[sigmove 22:40:46 DEBUG] transformed U399Me.SPC -> U399ME.SPC
[sigmove 22:40:46 DEBUG] transformed U399Mf.SPC -> U399MF.SPC
[Status 22:40:46 INFO] data for U399 transferred to science data processing
[Tidy 22:40:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:40:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:40:46 INFO] resetting WatchDogTimer
[Status 22:40:46 INFO] Starting Set [AERI set: name V399, 6 scans, 0 angle, D16300 command]
[Ingest 22:40:46 INFO] Sending XML status message
[Status 22:40:46 INFO] Mirror angle: 0
[Mirror 22:40:47 INFO] rotating to position V
[Status 22:40:47 INFO] .SET file for ACQ96 ready
[Ingest 22:40:48 INFO] Starting acquisition
[Status 22:40:48 INFO] reading housekeeping
[Status 22:41:06 INFO] acquire complete
[Status 22:41:07 INFO] writing housekeeping
[Sequencer 22:41:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:41:07 INFO] incremented V scene to 399 completed views
[Sequencer 22:41:07 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:41:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:41:07 INFO] incremented to [AERI set: name W399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:41:07 INFO] V399.SIG(18)
[sigmove 22:41:07 DEBUG] transformed V399Ma.SPC -> V399MA.SPC
[sigmove 22:41:07 DEBUG] transformed V399Mb.SPC -> V399MB.SPC
[sigmove 22:41:07 DEBUG] transformed V399Mc.SPC -> V399MC.SPC
[sigmove 22:41:07 DEBUG] transformed V399Md.SPC -> V399MD.SPC
[sigmove 22:41:07 DEBUG] transformed V399Me.SPC -> V399ME.SPC
[sigmove 22:41:07 DEBUG] transformed V399Mf.SPC -> V399MF.SPC
[Status 22:41:07 INFO] data for V399 transferred to science data processing
[Tidy 22:41:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:41:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:41:07 INFO] resetting WatchDogTimer
[Status 22:41:07 INFO] Starting Set [AERI set: name W399, 6 scans, 0 angle, D16300 command]
[Ingest 22:41:07 INFO] Sending XML status message
[Status 22:41:07 INFO] Mirror angle: 0
[Mirror 22:41:08 INFO] rotating to position W
[Status 22:41:08 INFO] .SET file for ACQ96 ready
[Ingest 22:41:09 INFO] Starting acquisition
[Status 22:41:09 INFO] reading housekeeping
[Status 22:41:27 INFO] acquire complete
[Status 22:41:28 INFO] writing housekeeping
[Sequencer 22:41:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:41:28 INFO] incremented W scene to 399 completed views
[Sequencer 22:41:28 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:41:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:41:28 INFO] incremented to [AERI set: name X399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:41:28 INFO] W399.SIG(18)
[sigmove 22:41:28 DEBUG] transformed W399Ma.SPC -> W399MA.SPC
[sigmove 22:41:28 DEBUG] transformed W399Mb.SPC -> W399MB.SPC
[sigmove 22:41:28 DEBUG] transformed W399Mc.SPC -> W399MC.SPC
[sigmove 22:41:28 DEBUG] transformed W399Md.SPC -> W399MD.SPC
[sigmove 22:41:28 DEBUG] transformed W399Me.SPC -> W399ME.SPC
[sigmove 22:41:28 DEBUG] transformed W399Mf.SPC -> W399MF.SPC
[Status 22:41:28 INFO] data for W399 transferred to science data processing
[Tidy 22:41:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:41:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:41:28 INFO] resetting WatchDogTimer
[Status 22:41:29 INFO] Starting Set [AERI set: name X399, 6 scans, 0 angle, D16300 command]
[Ingest 22:41:29 INFO] Sending XML status message
[Status 22:41:29 INFO] Mirror angle: 0
[Mirror 22:41:29 INFO] rotating to position X
[Status 22:41:30 INFO] .SET file for ACQ96 ready
[Ingest 22:41:30 INFO] Starting acquisition
[Status 22:41:31 INFO] reading housekeeping
[Status 22:41:48 INFO] acquire complete
[Status 22:41:49 INFO] writing housekeeping
[Sequencer 22:41:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:41:49 INFO] incremented X scene to 399 completed views
[Sequencer 22:41:49 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:41:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:41:49 INFO] incremented to [AERI set: name Y399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:41:49 INFO] X399.SIG(18)
[sigmove 22:41:49 DEBUG] transformed X399Ma.SPC -> X399MA.SPC
[sigmove 22:41:49 DEBUG] transformed X399Mb.SPC -> X399MB.SPC
[sigmove 22:41:49 DEBUG] transformed X399Mc.SPC -> X399MC.SPC
[sigmove 22:41:49 DEBUG] transformed X399Md.SPC -> X399MD.SPC
[sigmove 22:41:49 DEBUG] transformed X399Me.SPC -> X399ME.SPC
[sigmove 22:41:49 DEBUG] transformed X399Mf.SPC -> X399MF.SPC
[Status 22:41:49 INFO] data for X399 transferred to science data processing
[Tidy 22:41:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:41:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:41:49 INFO] resetting WatchDogTimer
[Status 22:41:50 INFO] Starting Set [AERI set: name Y399, 6 scans, 0 angle, D16300 command]
[Ingest 22:41:50 INFO] Sending XML status message
[Status 22:41:50 INFO] Mirror angle: 0
[Mirror 22:41:50 INFO] rotating to position Y
[Status 22:41:51 INFO] .SET file for ACQ96 ready
[Ingest 22:41:51 INFO] Starting acquisition
[Status 22:41:52 INFO] reading housekeeping
[Status 22:42:10 INFO] acquire complete
[Status 22:42:11 INFO] writing housekeeping
[Sequencer 22:42:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:42:11 INFO] incremented Y scene to 399 completed views
[Sequencer 22:42:11 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:42:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:42:11 INFO] incremented to [AERI set: name Z399, 6 scans, 0 angle, D16300 command] set
[sigmove 22:42:11 INFO] Y399.SIG(18)
[sigmove 22:42:11 DEBUG] transformed Y399Ma.SPC -> Y399MA.SPC
[sigmove 22:42:11 DEBUG] transformed Y399Mb.SPC -> Y399MB.SPC
[sigmove 22:42:11 DEBUG] transformed Y399Mc.SPC -> Y399MC.SPC
[sigmove 22:42:11 DEBUG] transformed Y399Md.SPC -> Y399MD.SPC
[sigmove 22:42:11 DEBUG] transformed Y399Me.SPC -> Y399ME.SPC
[sigmove 22:42:11 DEBUG] transformed Y399Mf.SPC -> Y399MF.SPC
[Status 22:42:11 INFO] data for Y399 transferred to science data processing
[Tidy 22:42:11 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:42:11 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:42:11 INFO] resetting WatchDogTimer
[Status 22:42:11 INFO] Starting Set [AERI set: name Z399, 6 scans, 0 angle, D16300 command]
[Ingest 22:42:11 INFO] Sending XML status message
[Status 22:42:11 INFO] Mirror angle: 0
[Mirror 22:42:12 INFO] rotating to position Z
[Status 22:42:12 INFO] .SET file for ACQ96 ready
[Ingest 22:42:13 INFO] Starting acquisition
[Status 22:42:13 INFO] reading housekeeping
[Status 22:42:31 INFO] acquire complete
[Status 22:42:32 INFO] writing housekeeping
[Sequencer 22:42:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:42:32 INFO] incremented Z scene to 399 completed views
[Sequencer 22:42:32 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:42:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:42:32 INFO] incremented to [AERI set: name A400, 6 scans, 120 angle, D28300 command] set
[sigmove 22:42:32 INFO] Z399.SIG(18)
[sigmove 22:42:32 DEBUG] transformed Z399Ma.SPC -> Z399MA.SPC
[sigmove 22:42:32 DEBUG] transformed Z399Mb.SPC -> Z399MB.SPC
[sigmove 22:42:32 DEBUG] transformed Z399Mc.SPC -> Z399MC.SPC
[sigmove 22:42:32 DEBUG] transformed Z399Md.SPC -> Z399MD.SPC
[sigmove 22:42:32 DEBUG] transformed Z399Me.SPC -> Z399ME.SPC
[sigmove 22:42:32 DEBUG] transformed Z399Mf.SPC -> Z399MF.SPC
[Status 22:42:32 INFO] data for Z399 transferred to science data processing
[Tidy 22:42:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:42:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:42:32 INFO] resetting WatchDogTimer
[Status 22:42:33 INFO] Starting Set [AERI set: name A400, 6 scans, 120 angle, D28300 command]
[Ingest 22:42:33 INFO] Sending XML status message
[Status 22:42:33 INFO] Mirror angle: 120
[Mirror 22:42:33 INFO] rotating to position A
[Status 22:42:35 INFO] .SET file for ACQ96 ready
[Ingest 22:42:35 INFO] Starting acquisition
[Status 22:42:36 INFO] reading housekeeping
[Status 22:42:53 INFO] acquire complete
[Status 22:42:55 INFO] writing housekeeping
[Sequencer 22:42:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:42:55 INFO] incremented A scene to 400 completed views
[Sequencer 22:42:55 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:42:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:42:55 INFO] incremented to [AERI set: name H400, 6 scans, 60 angle, D22500 command] set
[sigmove 22:42:55 INFO] A400.SIG(18)
[sigmove 22:42:55 DEBUG] transformed A400Ma.SPC -> A400MA.SPC
[sigmove 22:42:55 DEBUG] transformed A400Mb.SPC -> A400MB.SPC
[sigmove 22:42:55 DEBUG] transformed A400Mc.SPC -> A400MC.SPC
[sigmove 22:42:55 DEBUG] transformed A400Md.SPC -> A400MD.SPC
[sigmove 22:42:55 DEBUG] transformed A400Me.SPC -> A400ME.SPC
[sigmove 22:42:55 DEBUG] transformed A400Mf.SPC -> A400MF.SPC
[Status 22:42:55 INFO] data for A400 transferred to science data processing
[Tidy 22:42:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:42:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:42:55 INFO] resetting WatchDogTimer
[Status 22:42:55 INFO] Starting Set [AERI set: name H400, 6 scans, 60 angle, D22500 command]
[Ingest 22:42:55 INFO] Sending XML status message
[Status 22:42:55 INFO] Mirror angle: 60
[Mirror 22:42:56 INFO] rotating to position H
[Status 22:42:57 INFO] .SET file for ACQ96 ready
[Ingest 22:42:57 INFO] Starting acquisition
[Status 22:42:58 INFO] reading housekeeping
[Status 22:43:16 INFO] acquire complete
[Status 22:43:17 INFO] writing housekeeping
[Sequencer 22:43:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:43:17 INFO] incremented H scene to 400 completed views
[Sequencer 22:43:17 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:43:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:43:17 INFO] incremented to [AERI set: name S400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:43:17 INFO] H400.SIG(18)
[sigmove 22:43:17 DEBUG] transformed H400Ma.SPC -> H400MA.SPC
[sigmove 22:43:17 DEBUG] transformed H400Mb.SPC -> H400MB.SPC
[sigmove 22:43:17 DEBUG] transformed H400Mc.SPC -> H400MC.SPC
[sigmove 22:43:17 DEBUG] transformed H400Md.SPC -> H400MD.SPC
[sigmove 22:43:17 DEBUG] transformed H400Me.SPC -> H400ME.SPC
[sigmove 22:43:17 DEBUG] transformed H400Mf.SPC -> H400MF.SPC
[Status 22:43:17 INFO] data for H400 transferred to science data processing
[Tidy 22:43:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:43:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:43:17 INFO] resetting WatchDogTimer
[Status 22:43:17 INFO] Starting Set [AERI set: name S400, 6 scans, 0 angle, D16300 command]
[Ingest 22:43:17 INFO] Sending XML status message
[Status 22:43:17 INFO] Mirror angle: 0
[Mirror 22:43:18 INFO] rotating to position S
[Status 22:43:19 INFO] .SET file for ACQ96 ready
[Ingest 22:43:20 INFO] Starting acquisition
[Status 22:43:20 INFO] reading housekeeping
[Status 22:43:38 INFO] acquire complete
[Status 22:43:39 INFO] writing housekeeping
[Sequencer 22:43:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:43:39 INFO] incremented S scene to 400 completed views
[Sequencer 22:43:39 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:43:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:43:39 INFO] incremented to [AERI set: name T400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:43:39 INFO] S400.SIG(18)
[sigmove 22:43:39 DEBUG] transformed S400Ma.SPC -> S400MA.SPC
[sigmove 22:43:39 DEBUG] transformed S400Mb.SPC -> S400MB.SPC
[sigmove 22:43:39 DEBUG] transformed S400Mc.SPC -> S400MC.SPC
[sigmove 22:43:39 DEBUG] transformed S400Md.SPC -> S400MD.SPC
[sigmove 22:43:39 DEBUG] transformed S400Me.SPC -> S400ME.SPC
[sigmove 22:43:39 DEBUG] transformed S400Mf.SPC -> S400MF.SPC
[Status 22:43:39 INFO] data for S400 transferred to science data processing
[Tidy 22:43:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:43:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:43:39 INFO] resetting WatchDogTimer
[Status 22:43:40 INFO] Starting Set [AERI set: name T400, 6 scans, 0 angle, D16300 command]
[Ingest 22:43:40 INFO] Sending XML status message
[Status 22:43:40 INFO] Mirror angle: 0
[Mirror 22:43:40 INFO] rotating to position T
[Status 22:43:41 INFO] .SET file for ACQ96 ready
[Ingest 22:43:41 INFO] Starting acquisition
[Status 22:43:42 INFO] reading housekeeping
[Status 22:43:59 INFO] acquire complete
[Status 22:44:01 INFO] writing housekeeping
[Sequencer 22:44:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:44:01 INFO] incremented T scene to 400 completed views
[Sequencer 22:44:01 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:44:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:44:01 INFO] incremented to [AERI set: name U400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:44:01 INFO] T400.SIG(18)
[sigmove 22:44:01 DEBUG] transformed T400Ma.SPC -> T400MA.SPC
[sigmove 22:44:01 DEBUG] transformed T400Mb.SPC -> T400MB.SPC
[sigmove 22:44:01 DEBUG] transformed T400Mc.SPC -> T400MC.SPC
[sigmove 22:44:01 DEBUG] transformed T400Md.SPC -> T400MD.SPC
[sigmove 22:44:01 DEBUG] transformed T400Me.SPC -> T400ME.SPC
[sigmove 22:44:01 DEBUG] transformed T400Mf.SPC -> T400MF.SPC
[Status 22:44:01 INFO] data for T400 transferred to science data processing
[Tidy 22:44:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:44:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:44:01 INFO] resetting WatchDogTimer
[Status 22:44:01 INFO] Starting Set [AERI set: name U400, 6 scans, 0 angle, D16300 command]
[Ingest 22:44:01 INFO] Sending XML status message
[Status 22:44:01 INFO] Mirror angle: 0
[Mirror 22:44:02 INFO] rotating to position U
[Status 22:44:02 INFO] .SET file for ACQ96 ready
[Ingest 22:44:03 INFO] Starting acquisition
[Status 22:44:03 INFO] reading housekeeping
[Status 22:44:21 INFO] acquire complete
[Status 22:44:22 INFO] writing housekeeping
[Sequencer 22:44:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:44:22 INFO] incremented U scene to 400 completed views
[Sequencer 22:44:22 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:44:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:44:22 INFO] incremented to [AERI set: name V400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:44:22 INFO] U400.SIG(18)
[sigmove 22:44:22 DEBUG] transformed U400Ma.SPC -> U400MA.SPC
[sigmove 22:44:22 DEBUG] transformed U400Mb.SPC -> U400MB.SPC
[sigmove 22:44:22 DEBUG] transformed U400Mc.SPC -> U400MC.SPC
[sigmove 22:44:22 DEBUG] transformed U400Md.SPC -> U400MD.SPC
[sigmove 22:44:22 DEBUG] transformed U400Me.SPC -> U400ME.SPC
[sigmove 22:44:22 DEBUG] transformed U400Mf.SPC -> U400MF.SPC
[Status 22:44:22 INFO] data for U400 transferred to science data processing
[Tidy 22:44:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:44:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:44:22 INFO] resetting WatchDogTimer
[Status 22:44:23 INFO] Starting Set [AERI set: name V400, 6 scans, 0 angle, D16300 command]
[Ingest 22:44:23 INFO] Sending XML status message
[Status 22:44:23 INFO] Mirror angle: 0
[Mirror 22:44:23 INFO] rotating to position V
[Status 22:44:24 INFO] .SET file for ACQ96 ready
[Ingest 22:44:24 INFO] Starting acquisition
[Status 22:44:25 INFO] reading housekeeping
[Status 22:44:42 INFO] acquire complete
[Status 22:44:43 INFO] writing housekeeping
[Sequencer 22:44:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:44:43 INFO] incremented V scene to 400 completed views
[Sequencer 22:44:43 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:44:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:44:43 INFO] incremented to [AERI set: name W400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:44:43 INFO] V400.SIG(18)
[sigmove 22:44:43 DEBUG] transformed V400Ma.SPC -> V400MA.SPC
[sigmove 22:44:43 DEBUG] transformed V400Mb.SPC -> V400MB.SPC
[sigmove 22:44:43 DEBUG] transformed V400Mc.SPC -> V400MC.SPC
[sigmove 22:44:43 DEBUG] transformed V400Md.SPC -> V400MD.SPC
[sigmove 22:44:43 DEBUG] transformed V400Me.SPC -> V400ME.SPC
[sigmove 22:44:43 DEBUG] transformed V400Mf.SPC -> V400MF.SPC
[Status 22:44:43 INFO] data for V400 transferred to science data processing
[Tidy 22:44:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:44:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:44:43 INFO] resetting WatchDogTimer
[Status 22:44:44 INFO] Starting Set [AERI set: name W400, 6 scans, 0 angle, D16300 command]
[Ingest 22:44:44 INFO] Sending XML status message
[Status 22:44:44 INFO] Mirror angle: 0
[Mirror 22:44:44 INFO] rotating to position W
[Status 22:44:45 INFO] .SET file for ACQ96 ready
[Ingest 22:44:45 INFO] Starting acquisition
[Status 22:44:46 INFO] reading housekeeping
[Status 22:45:03 INFO] acquire complete
[Status 22:45:05 INFO] writing housekeeping
[Sequencer 22:45:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:45:05 INFO] incremented W scene to 400 completed views
[Sequencer 22:45:05 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:45:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:45:05 INFO] incremented to [AERI set: name X400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:45:05 INFO] W400.SIG(18)
[sigmove 22:45:05 DEBUG] transformed W400Ma.SPC -> W400MA.SPC
[sigmove 22:45:05 DEBUG] transformed W400Mb.SPC -> W400MB.SPC
[sigmove 22:45:05 DEBUG] transformed W400Mc.SPC -> W400MC.SPC
[sigmove 22:45:05 DEBUG] transformed W400Md.SPC -> W400MD.SPC
[sigmove 22:45:05 DEBUG] transformed W400Me.SPC -> W400ME.SPC
[sigmove 22:45:05 DEBUG] transformed W400Mf.SPC -> W400MF.SPC
[Status 22:45:05 INFO] data for W400 transferred to science data processing
[Tidy 22:45:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:45:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:45:05 INFO] resetting WatchDogTimer
[Status 22:45:05 INFO] Starting Set [AERI set: name X400, 6 scans, 0 angle, D16300 command]
[Ingest 22:45:05 INFO] Sending XML status message
[Status 22:45:05 INFO] Mirror angle: 0
[Mirror 22:45:06 INFO] rotating to position X
[Status 22:45:06 INFO] .SET file for ACQ96 ready
[Ingest 22:45:07 INFO] Starting acquisition
[Status 22:45:07 INFO] reading housekeeping
[Status 22:45:25 INFO] acquire complete
[Status 22:45:26 INFO] writing housekeeping
[Sequencer 22:45:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:45:26 INFO] incremented X scene to 400 completed views
[Sequencer 22:45:26 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:45:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:45:26 INFO] incremented to [AERI set: name Y400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:45:26 INFO] X400.SIG(18)
[sigmove 22:45:26 DEBUG] transformed X400Ma.SPC -> X400MA.SPC
[sigmove 22:45:26 DEBUG] transformed X400Mb.SPC -> X400MB.SPC
[sigmove 22:45:26 DEBUG] transformed X400Mc.SPC -> X400MC.SPC
[sigmove 22:45:26 DEBUG] transformed X400Md.SPC -> X400MD.SPC
[sigmove 22:45:26 DEBUG] transformed X400Me.SPC -> X400ME.SPC
[sigmove 22:45:26 DEBUG] transformed X400Mf.SPC -> X400MF.SPC
[Status 22:45:26 INFO] data for X400 transferred to science data processing
[Tidy 22:45:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:45:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:45:26 INFO] resetting WatchDogTimer
[Status 22:45:26 INFO] Starting Set [AERI set: name Y400, 6 scans, 0 angle, D16300 command]
[Ingest 22:45:26 INFO] Sending XML status message
[Status 22:45:26 INFO] Mirror angle: 0
[Mirror 22:45:27 INFO] rotating to position Y
[Status 22:45:28 INFO] .SET file for ACQ96 ready
[Ingest 22:45:28 INFO] Starting acquisition
[Status 22:45:29 INFO] reading housekeeping
[Status 22:45:46 INFO] acquire complete
[Status 22:45:47 INFO] writing housekeeping
[Sequencer 22:45:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:45:47 INFO] incremented Y scene to 400 completed views
[Sequencer 22:45:47 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:45:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:45:47 INFO] incremented to [AERI set: name Z400, 6 scans, 0 angle, D16300 command] set
[sigmove 22:45:47 INFO] Y400.SIG(18)
[sigmove 22:45:47 DEBUG] transformed Y400Ma.SPC -> Y400MA.SPC
[sigmove 22:45:47 DEBUG] transformed Y400Mb.SPC -> Y400MB.SPC
[sigmove 22:45:47 DEBUG] transformed Y400Mc.SPC -> Y400MC.SPC
[sigmove 22:45:47 DEBUG] transformed Y400Md.SPC -> Y400MD.SPC
[sigmove 22:45:47 DEBUG] transformed Y400Me.SPC -> Y400ME.SPC
[sigmove 22:45:47 DEBUG] transformed Y400Mf.SPC -> Y400MF.SPC
[Status 22:45:47 INFO] data for Y400 transferred to science data processing
[Tidy 22:45:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:45:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:45:47 INFO] resetting WatchDogTimer
[Status 22:45:48 INFO] Starting Set [AERI set: name Z400, 6 scans, 0 angle, D16300 command]
[Ingest 22:45:48 INFO] Sending XML status message
[Status 22:45:48 INFO] Mirror angle: 0
[Mirror 22:45:48 INFO] rotating to position Z
[Status 22:45:49 INFO] .SET file for ACQ96 ready
[Ingest 22:45:49 INFO] Starting acquisition
[Status 22:45:50 INFO] reading housekeeping
[Status 22:46:07 INFO] acquire complete
[Status 22:46:09 INFO] writing housekeeping
[Sequencer 22:46:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:46:09 INFO] incremented Z scene to 400 completed views
[Sequencer 22:46:09 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:46:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:46:09 INFO] incremented to [AERI set: name H401, 6 scans, 60 angle, D22500 command] set
[sigmove 22:46:09 INFO] Z400.SIG(18)
[sigmove 22:46:09 DEBUG] transformed Z400Ma.SPC -> Z400MA.SPC
[sigmove 22:46:09 DEBUG] transformed Z400Mb.SPC -> Z400MB.SPC
[sigmove 22:46:09 DEBUG] transformed Z400Mc.SPC -> Z400MC.SPC
[sigmove 22:46:09 DEBUG] transformed Z400Md.SPC -> Z400MD.SPC
[sigmove 22:46:09 DEBUG] transformed Z400Me.SPC -> Z400ME.SPC
[sigmove 22:46:09 DEBUG] transformed Z400Mf.SPC -> Z400MF.SPC
[Status 22:46:09 INFO] data for Z400 transferred to science data processing
[Tidy 22:46:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:46:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:46:09 INFO] resetting WatchDogTimer
[Status 22:46:09 INFO] Starting Set [AERI set: name H401, 6 scans, 60 angle, D22500 command]
[Ingest 22:46:09 INFO] Sending XML status message
[Status 22:46:09 INFO] Mirror angle: 60
[Mirror 22:46:10 INFO] rotating to position H
[Status 22:46:11 INFO] .SET file for ACQ96 ready
[Ingest 22:46:11 INFO] Starting acquisition
[Status 22:46:12 INFO] reading housekeeping
[Status 22:46:30 INFO] acquire complete
[Status 22:46:31 INFO] writing housekeeping
[Sequencer 22:46:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:46:31 INFO] incremented H scene to 401 completed views
[Sequencer 22:46:31 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:46:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:46:31 INFO] incremented to [AERI set: name A401, 6 scans, 120 angle, D28300 command] set
[sigmove 22:46:31 INFO] H401.SIG(18)
[sigmove 22:46:31 DEBUG] transformed H401Ma.SPC -> H401MA.SPC
[sigmove 22:46:31 DEBUG] transformed H401Mb.SPC -> H401MB.SPC
[sigmove 22:46:31 DEBUG] transformed H401Mc.SPC -> H401MC.SPC
[sigmove 22:46:31 DEBUG] transformed H401Md.SPC -> H401MD.SPC
[sigmove 22:46:31 DEBUG] transformed H401Me.SPC -> H401ME.SPC
[sigmove 22:46:31 DEBUG] transformed H401Mf.SPC -> H401MF.SPC
[Status 22:46:31 INFO] data for H401 transferred to science data processing
[Tidy 22:46:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:46:31 INFO] A399.FIN(19),H399.FIN(19),S399.FIN(19),T399.FIN(19),U399.FIN(19),V399.FIN(19),W399.FIN(19),X399.FIN(19),Y399.FIN(19),Z399.FIN(19),A400.FIN(19),H400.FIN(19),S400.FIN(19),T400.FIN(19),U400.FIN(19),V400.FIN(19),W400.FIN(19),X400.FIN(19),Y400.FIN(19),Z400.FIN(19)
[sigmove 22:46:31 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:46:31 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:46:38 DEBUG] done zipping
[WatchDog 22:46:38 INFO] resetting WatchDogTimer
[Status 22:46:39 INFO] Starting Set [AERI set: name A401, 6 scans, 120 angle, D28300 command]
[Ingest 22:46:39 INFO] Sending XML status message
[Status 22:46:39 INFO] Mirror angle: 120
[Mirror 22:46:39 INFO] rotating to position A
[Status 22:46:41 INFO] .SET file for ACQ96 ready
[Ingest 22:46:41 INFO] Starting acquisition
[Status 22:46:41 INFO] reading housekeeping
[Status 22:46:59 INFO] acquire complete
[Status 22:47:00 INFO] writing housekeeping
[Sequencer 22:47:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:47:00 INFO] incremented A scene to 401 completed views
[Sequencer 22:47:00 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:47:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:47:00 INFO] incremented to [AERI set: name S401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:47:00 INFO] A401.SIG(18)
[sigmove 22:47:00 DEBUG] transformed A401Ma.SPC -> A401MA.SPC
[sigmove 22:47:00 DEBUG] transformed A401Mb.SPC -> A401MB.SPC
[sigmove 22:47:00 DEBUG] transformed A401Mc.SPC -> A401MC.SPC
[sigmove 22:47:00 DEBUG] transformed A401Md.SPC -> A401MD.SPC
[sigmove 22:47:00 DEBUG] transformed A401Me.SPC -> A401ME.SPC
[sigmove 22:47:00 DEBUG] transformed A401Mf.SPC -> A401MF.SPC
[Status 22:47:00 INFO] data for A401 transferred to science data processing
[Tidy 22:47:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:47:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:47:00 INFO] resetting WatchDogTimer
[Status 22:47:01 INFO] Starting Set [AERI set: name S401, 6 scans, 0 angle, D16300 command]
[Ingest 22:47:01 INFO] Sending XML status message
[Status 22:47:01 INFO] Mirror angle: 0
[Mirror 22:47:01 INFO] rotating to position S
[Status 22:47:03 INFO] .SET file for ACQ96 ready
[Ingest 22:47:03 INFO] Starting acquisition
[Status 22:47:04 INFO] reading housekeeping
[Status 22:47:21 INFO] acquire complete
[Status 22:47:23 INFO] writing housekeeping
[Sequencer 22:47:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:47:23 INFO] incremented S scene to 401 completed views
[Sequencer 22:47:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:47:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:47:23 INFO] incremented to [AERI set: name T401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:47:23 INFO] S401.SIG(18)
[sigmove 22:47:23 DEBUG] transformed S401Ma.SPC -> S401MA.SPC
[sigmove 22:47:23 DEBUG] transformed S401Mb.SPC -> S401MB.SPC
[sigmove 22:47:23 DEBUG] transformed S401Mc.SPC -> S401MC.SPC
[sigmove 22:47:23 DEBUG] transformed S401Md.SPC -> S401MD.SPC
[sigmove 22:47:23 DEBUG] transformed S401Me.SPC -> S401ME.SPC
[sigmove 22:47:23 DEBUG] transformed S401Mf.SPC -> S401MF.SPC
[Status 22:47:23 INFO] data for S401 transferred to science data processing
[Tidy 22:47:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:47:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:47:23 INFO] resetting WatchDogTimer
[Status 22:47:23 INFO] Starting Set [AERI set: name T401, 6 scans, 0 angle, D16300 command]
[Ingest 22:47:23 INFO] Sending XML status message
[Status 22:47:23 INFO] Mirror angle: 0
[Mirror 22:47:24 INFO] rotating to position T
[Status 22:47:24 INFO] .SET file for ACQ96 ready
[Ingest 22:47:25 INFO] Starting acquisition
[Status 22:47:25 INFO] reading housekeeping
[Status 22:47:43 INFO] acquire complete
[Status 22:47:44 INFO] writing housekeeping
[Sequencer 22:47:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:47:44 INFO] incremented T scene to 401 completed views
[Sequencer 22:47:44 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:47:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:47:44 INFO] incremented to [AERI set: name U401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:47:44 INFO] T401.SIG(18)
[sigmove 22:47:44 DEBUG] transformed T401Ma.SPC -> T401MA.SPC
[sigmove 22:47:44 DEBUG] transformed T401Mb.SPC -> T401MB.SPC
[sigmove 22:47:44 DEBUG] transformed T401Mc.SPC -> T401MC.SPC
[sigmove 22:47:44 DEBUG] transformed T401Md.SPC -> T401MD.SPC
[sigmove 22:47:44 DEBUG] transformed T401Me.SPC -> T401ME.SPC
[sigmove 22:47:44 DEBUG] transformed T401Mf.SPC -> T401MF.SPC
[Status 22:47:44 INFO] data for T401 transferred to science data processing
[Tidy 22:47:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:47:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:47:44 INFO] resetting WatchDogTimer
[Status 22:47:44 INFO] Starting Set [AERI set: name U401, 6 scans, 0 angle, D16300 command]
[Ingest 22:47:44 INFO] Sending XML status message
[Status 22:47:44 INFO] Mirror angle: 0
[Mirror 22:47:45 INFO] rotating to position U
[Status 22:47:46 INFO] .SET file for ACQ96 ready
[Ingest 22:47:46 INFO] Starting acquisition
[Status 22:47:47 INFO] reading housekeeping
[Status 22:48:04 INFO] acquire complete
[Status 22:48:05 INFO] writing housekeeping
[Sequencer 22:48:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:48:05 INFO] incremented U scene to 401 completed views
[Sequencer 22:48:05 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:48:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:48:05 INFO] incremented to [AERI set: name V401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:48:05 INFO] U401.SIG(18)
[sigmove 22:48:05 DEBUG] transformed U401Ma.SPC -> U401MA.SPC
[sigmove 22:48:05 DEBUG] transformed U401Mb.SPC -> U401MB.SPC
[sigmove 22:48:05 DEBUG] transformed U401Mc.SPC -> U401MC.SPC
[sigmove 22:48:05 DEBUG] transformed U401Md.SPC -> U401MD.SPC
[sigmove 22:48:05 DEBUG] transformed U401Me.SPC -> U401ME.SPC
[sigmove 22:48:05 DEBUG] transformed U401Mf.SPC -> U401MF.SPC
[Status 22:48:05 INFO] data for U401 transferred to science data processing
[Tidy 22:48:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:48:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:48:05 INFO] resetting WatchDogTimer
[Status 22:48:06 INFO] Starting Set [AERI set: name V401, 6 scans, 0 angle, D16300 command]
[Ingest 22:48:06 INFO] Sending XML status message
[Status 22:48:06 INFO] Mirror angle: 0
[Mirror 22:48:06 INFO] rotating to position V
[Status 22:48:07 INFO] .SET file for ACQ96 ready
[Ingest 22:48:07 INFO] Starting acquisition
[Status 22:48:08 INFO] reading housekeeping
[Status 22:48:25 INFO] acquire complete
[Status 22:48:27 INFO] writing housekeeping
[Sequencer 22:48:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:48:27 INFO] incremented V scene to 401 completed views
[Sequencer 22:48:27 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:48:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:48:27 INFO] incremented to [AERI set: name W401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:48:27 INFO] V401.SIG(18)
[sigmove 22:48:27 DEBUG] transformed V401Ma.SPC -> V401MA.SPC
[sigmove 22:48:27 DEBUG] transformed V401Mb.SPC -> V401MB.SPC
[sigmove 22:48:27 DEBUG] transformed V401Mc.SPC -> V401MC.SPC
[sigmove 22:48:27 DEBUG] transformed V401Md.SPC -> V401MD.SPC
[sigmove 22:48:27 DEBUG] transformed V401Me.SPC -> V401ME.SPC
[sigmove 22:48:27 DEBUG] transformed V401Mf.SPC -> V401MF.SPC
[Status 22:48:27 INFO] data for V401 transferred to science data processing
[Tidy 22:48:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:48:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:48:27 INFO] resetting WatchDogTimer
[Status 22:48:27 INFO] Starting Set [AERI set: name W401, 6 scans, 0 angle, D16300 command]
[Ingest 22:48:27 INFO] Sending XML status message
[Status 22:48:27 INFO] Mirror angle: 0
[Mirror 22:48:28 INFO] rotating to position W
[Status 22:48:28 INFO] .SET file for ACQ96 ready
[Ingest 22:48:29 INFO] Starting acquisition
[Status 22:48:29 INFO] reading housekeeping
[Status 22:48:47 INFO] acquire complete
[Status 22:48:48 INFO] writing housekeeping
[Sequencer 22:48:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:48:48 INFO] incremented W scene to 401 completed views
[Sequencer 22:48:48 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:48:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:48:48 INFO] incremented to [AERI set: name X401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:48:48 INFO] W401.SIG(18)
[sigmove 22:48:48 DEBUG] transformed W401Ma.SPC -> W401MA.SPC
[sigmove 22:48:48 DEBUG] transformed W401Mb.SPC -> W401MB.SPC
[sigmove 22:48:48 DEBUG] transformed W401Mc.SPC -> W401MC.SPC
[sigmove 22:48:48 DEBUG] transformed W401Md.SPC -> W401MD.SPC
[sigmove 22:48:48 DEBUG] transformed W401Me.SPC -> W401ME.SPC
[sigmove 22:48:48 DEBUG] transformed W401Mf.SPC -> W401MF.SPC
[Status 22:48:48 INFO] data for W401 transferred to science data processing
[Tidy 22:48:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:48:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:48:48 INFO] resetting WatchDogTimer
[Status 22:48:48 INFO] Starting Set [AERI set: name X401, 6 scans, 0 angle, D16300 command]
[Ingest 22:48:48 INFO] Sending XML status message
[Status 22:48:48 INFO] Mirror angle: 0
[Mirror 22:48:49 INFO] rotating to position X
[Status 22:48:50 INFO] .SET file for ACQ96 ready
[Ingest 22:48:50 INFO] Starting acquisition
[Status 22:48:51 INFO] reading housekeeping
[Status 22:49:08 INFO] acquire complete
[Status 22:49:09 INFO] writing housekeeping
[Sequencer 22:49:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:49:09 INFO] incremented X scene to 401 completed views
[Sequencer 22:49:09 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:49:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:49:09 INFO] incremented to [AERI set: name Y401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:49:09 INFO] X401.SIG(18)
[sigmove 22:49:09 DEBUG] transformed X401Ma.SPC -> X401MA.SPC
[sigmove 22:49:09 DEBUG] transformed X401Mb.SPC -> X401MB.SPC
[sigmove 22:49:09 DEBUG] transformed X401Mc.SPC -> X401MC.SPC
[sigmove 22:49:09 DEBUG] transformed X401Md.SPC -> X401MD.SPC
[sigmove 22:49:09 DEBUG] transformed X401Me.SPC -> X401ME.SPC
[sigmove 22:49:09 DEBUG] transformed X401Mf.SPC -> X401MF.SPC
[Status 22:49:09 INFO] data for X401 transferred to science data processing
[Tidy 22:49:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:49:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:49:09 INFO] resetting WatchDogTimer
[Status 22:49:10 INFO] Starting Set [AERI set: name Y401, 6 scans, 0 angle, D16300 command]
[Ingest 22:49:10 INFO] Sending XML status message
[Status 22:49:10 INFO] Mirror angle: 0
[Mirror 22:49:10 INFO] rotating to position Y
[Status 22:49:11 INFO] .SET file for ACQ96 ready
[Ingest 22:49:11 INFO] Starting acquisition
[Status 22:49:12 INFO] reading housekeeping
[Status 22:49:29 INFO] acquire complete
[Status 22:49:30 INFO] writing housekeeping
[Sequencer 22:49:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:49:30 INFO] incremented Y scene to 401 completed views
[Sequencer 22:49:30 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:49:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:49:30 INFO] incremented to [AERI set: name Z401, 6 scans, 0 angle, D16300 command] set
[sigmove 22:49:30 INFO] Y401.SIG(18)
[sigmove 22:49:30 DEBUG] transformed Y401Ma.SPC -> Y401MA.SPC
[sigmove 22:49:30 DEBUG] transformed Y401Mb.SPC -> Y401MB.SPC
[sigmove 22:49:30 DEBUG] transformed Y401Mc.SPC -> Y401MC.SPC
[sigmove 22:49:30 DEBUG] transformed Y401Md.SPC -> Y401MD.SPC
[sigmove 22:49:30 DEBUG] transformed Y401Me.SPC -> Y401ME.SPC
[sigmove 22:49:30 DEBUG] transformed Y401Mf.SPC -> Y401MF.SPC
[Status 22:49:30 INFO] data for Y401 transferred to science data processing
[Tidy 22:49:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:49:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:49:30 INFO] resetting WatchDogTimer
[Status 22:49:31 INFO] Starting Set [AERI set: name Z401, 6 scans, 0 angle, D16300 command]
[Ingest 22:49:31 INFO] Sending XML status message
[Status 22:49:31 INFO] Mirror angle: 0
[Mirror 22:49:31 INFO] rotating to position Z
[Status 22:49:32 INFO] .SET file for ACQ96 ready
[Ingest 22:49:32 INFO] Starting acquisition
[Status 22:49:33 INFO] reading housekeeping
[Status 22:49:51 INFO] acquire complete
[Status 22:49:52 INFO] writing housekeeping
[Sequencer 22:49:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:49:52 INFO] incremented Z scene to 401 completed views
[Sequencer 22:49:52 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:49:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:49:52 INFO] incremented to [AERI set: name A402, 6 scans, 120 angle, D28300 command] set
[sigmove 22:49:52 INFO] Z401.SIG(18)
[sigmove 22:49:52 DEBUG] transformed Z401Ma.SPC -> Z401MA.SPC
[sigmove 22:49:52 DEBUG] transformed Z401Mb.SPC -> Z401MB.SPC
[sigmove 22:49:52 DEBUG] transformed Z401Mc.SPC -> Z401MC.SPC
[sigmove 22:49:52 DEBUG] transformed Z401Md.SPC -> Z401MD.SPC
[sigmove 22:49:52 DEBUG] transformed Z401Me.SPC -> Z401ME.SPC
[sigmove 22:49:52 DEBUG] transformed Z401Mf.SPC -> Z401MF.SPC
[Status 22:49:52 INFO] data for Z401 transferred to science data processing
[Tidy 22:49:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:49:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:49:52 INFO] resetting WatchDogTimer
[Status 22:49:52 INFO] Starting Set [AERI set: name A402, 6 scans, 120 angle, D28300 command]
[Ingest 22:49:52 INFO] Sending XML status message
[Status 22:49:52 INFO] Mirror angle: 120
[Mirror 22:49:53 INFO] rotating to position A
[Status 22:49:54 INFO] .SET file for ACQ96 ready
[Ingest 22:49:55 INFO] Starting acquisition
[Status 22:49:55 INFO] reading housekeeping
[Status 22:50:13 INFO] acquire complete
[Status 22:50:14 INFO] writing housekeeping
[Sequencer 22:50:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:50:14 INFO] incremented A scene to 402 completed views
[Sequencer 22:50:14 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:50:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:50:14 INFO] incremented to [AERI set: name H402, 6 scans, 60 angle, D22500 command] set
[sigmove 22:50:14 INFO] A402.SIG(18)
[sigmove 22:50:14 DEBUG] transformed A402Ma.SPC -> A402MA.SPC
[sigmove 22:50:14 DEBUG] transformed A402Mb.SPC -> A402MB.SPC
[sigmove 22:50:14 DEBUG] transformed A402Mc.SPC -> A402MC.SPC
[sigmove 22:50:14 DEBUG] transformed A402Md.SPC -> A402MD.SPC
[sigmove 22:50:14 DEBUG] transformed A402Me.SPC -> A402ME.SPC
[sigmove 22:50:14 DEBUG] transformed A402Mf.SPC -> A402MF.SPC
[Status 22:50:14 INFO] data for A402 transferred to science data processing
[Tidy 22:50:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:50:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:50:14 INFO] resetting WatchDogTimer
[Status 22:50:15 INFO] Starting Set [AERI set: name H402, 6 scans, 60 angle, D22500 command]
[Ingest 22:50:15 INFO] Sending XML status message
[Status 22:50:15 INFO] Mirror angle: 60
[Mirror 22:50:15 INFO] rotating to position H
[Status 22:50:16 INFO] .SET file for ACQ96 ready
[Ingest 22:50:17 INFO] Starting acquisition
[Status 22:50:17 INFO] reading housekeeping
[Status 22:50:35 INFO] acquire complete
[Status 22:50:37 INFO] writing housekeeping
[Sequencer 22:50:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:50:37 INFO] incremented H scene to 402 completed views
[Sequencer 22:50:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:50:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:50:37 INFO] incremented to [AERI set: name S402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:50:37 INFO] H402.SIG(18)
[sigmove 22:50:37 DEBUG] transformed H402Ma.SPC -> H402MA.SPC
[sigmove 22:50:37 DEBUG] transformed H402Mb.SPC -> H402MB.SPC
[sigmove 22:50:37 DEBUG] transformed H402Mc.SPC -> H402MC.SPC
[sigmove 22:50:37 DEBUG] transformed H402Md.SPC -> H402MD.SPC
[sigmove 22:50:37 DEBUG] transformed H402Me.SPC -> H402ME.SPC
[sigmove 22:50:37 DEBUG] transformed H402Mf.SPC -> H402MF.SPC
[Status 22:50:37 INFO] data for H402 transferred to science data processing
[Tidy 22:50:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:50:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:50:37 INFO] resetting WatchDogTimer
[Status 22:50:37 INFO] Starting Set [AERI set: name S402, 6 scans, 0 angle, D16300 command]
[Ingest 22:50:37 INFO] Sending XML status message
[Status 22:50:37 INFO] Mirror angle: 0
[Mirror 22:50:38 INFO] rotating to position S
[Status 22:50:39 INFO] .SET file for ACQ96 ready
[Ingest 22:50:39 INFO] Starting acquisition
[Status 22:50:40 INFO] reading housekeeping
[Status 22:50:58 INFO] acquire complete
[Status 22:50:59 INFO] writing housekeeping
[Sequencer 22:50:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:50:59 INFO] incremented S scene to 402 completed views
[Sequencer 22:50:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:50:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:50:59 INFO] incremented to [AERI set: name T402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:50:59 INFO] S402.SIG(18)
[sigmove 22:50:59 DEBUG] transformed S402Ma.SPC -> S402MA.SPC
[sigmove 22:50:59 DEBUG] transformed S402Mb.SPC -> S402MB.SPC
[sigmove 22:50:59 DEBUG] transformed S402Mc.SPC -> S402MC.SPC
[sigmove 22:50:59 DEBUG] transformed S402Md.SPC -> S402MD.SPC
[sigmove 22:50:59 DEBUG] transformed S402Me.SPC -> S402ME.SPC
[sigmove 22:50:59 DEBUG] transformed S402Mf.SPC -> S402MF.SPC
[Status 22:50:59 INFO] data for S402 transferred to science data processing
[Tidy 22:50:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:50:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:50:59 INFO] resetting WatchDogTimer
[Status 22:51:00 INFO] Starting Set [AERI set: name T402, 6 scans, 0 angle, D16300 command]
[Ingest 22:51:00 INFO] Sending XML status message
[Status 22:51:00 INFO] Mirror angle: 0
[Mirror 22:51:00 INFO] rotating to position T
[Status 22:51:01 INFO] .SET file for ACQ96 ready
[Ingest 22:51:01 INFO] Starting acquisition
[Status 22:51:02 INFO] reading housekeeping
[Status 22:51:19 INFO] acquire complete
[Status 22:51:20 INFO] writing housekeeping
[Sequencer 22:51:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:51:21 INFO] incremented T scene to 402 completed views
[Sequencer 22:51:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:51:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:51:21 INFO] incremented to [AERI set: name U402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:51:21 INFO] T402.SIG(18)
[sigmove 22:51:21 DEBUG] transformed T402Ma.SPC -> T402MA.SPC
[sigmove 22:51:21 DEBUG] transformed T402Mb.SPC -> T402MB.SPC
[sigmove 22:51:21 DEBUG] transformed T402Mc.SPC -> T402MC.SPC
[sigmove 22:51:21 DEBUG] transformed T402Md.SPC -> T402MD.SPC
[sigmove 22:51:21 DEBUG] transformed T402Me.SPC -> T402ME.SPC
[sigmove 22:51:21 DEBUG] transformed T402Mf.SPC -> T402MF.SPC
[Status 22:51:21 INFO] data for T402 transferred to science data processing
[Tidy 22:51:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:51:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:51:21 INFO] resetting WatchDogTimer
[Status 22:51:21 INFO] Starting Set [AERI set: name U402, 6 scans, 0 angle, D16300 command]
[Ingest 22:51:21 INFO] Sending XML status message
[Status 22:51:21 INFO] Mirror angle: 0
[Mirror 22:51:21 INFO] rotating to position U
[Status 22:51:22 INFO] .SET file for ACQ96 ready
[Ingest 22:51:22 INFO] Starting acquisition
[Status 22:51:23 INFO] reading housekeeping
[Status 22:51:40 INFO] acquire complete
[Status 22:51:42 INFO] writing housekeeping
[Sequencer 22:51:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:51:42 INFO] incremented U scene to 402 completed views
[Sequencer 22:51:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:51:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:51:42 INFO] incremented to [AERI set: name V402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:51:42 INFO] U402.SIG(18)
[sigmove 22:51:42 DEBUG] transformed U402Ma.SPC -> U402MA.SPC
[sigmove 22:51:42 DEBUG] transformed U402Mb.SPC -> U402MB.SPC
[sigmove 22:51:42 DEBUG] transformed U402Mc.SPC -> U402MC.SPC
[sigmove 22:51:42 DEBUG] transformed U402Md.SPC -> U402MD.SPC
[sigmove 22:51:42 DEBUG] transformed U402Me.SPC -> U402ME.SPC
[sigmove 22:51:42 DEBUG] transformed U402Mf.SPC -> U402MF.SPC
[Status 22:51:42 INFO] data for U402 transferred to science data processing
[Tidy 22:51:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:51:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:51:42 INFO] resetting WatchDogTimer
[Status 22:51:42 INFO] Starting Set [AERI set: name V402, 6 scans, 0 angle, D16300 command]
[Ingest 22:51:42 INFO] Sending XML status message
[Status 22:51:42 INFO] Mirror angle: 0
[Mirror 22:51:43 INFO] rotating to position V
[Status 22:51:43 INFO] .SET file for ACQ96 ready
[Ingest 22:51:44 INFO] Starting acquisition
[Status 22:51:44 INFO] reading housekeeping
[Status 22:52:02 INFO] acquire complete
[Status 22:52:03 INFO] writing housekeeping
[Sequencer 22:52:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:52:03 INFO] incremented V scene to 402 completed views
[Sequencer 22:52:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:52:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:52:03 INFO] incremented to [AERI set: name W402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:52:03 INFO] V402.SIG(18)
[sigmove 22:52:03 DEBUG] transformed V402Ma.SPC -> V402MA.SPC
[sigmove 22:52:03 DEBUG] transformed V402Mb.SPC -> V402MB.SPC
[sigmove 22:52:03 DEBUG] transformed V402Mc.SPC -> V402MC.SPC
[sigmove 22:52:03 DEBUG] transformed V402Md.SPC -> V402MD.SPC
[sigmove 22:52:03 DEBUG] transformed V402Me.SPC -> V402ME.SPC
[sigmove 22:52:03 DEBUG] transformed V402Mf.SPC -> V402MF.SPC
[Status 22:52:03 INFO] data for V402 transferred to science data processing
[Tidy 22:52:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:52:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:52:03 INFO] resetting WatchDogTimer
[Status 22:52:04 INFO] Starting Set [AERI set: name W402, 6 scans, 0 angle, D16300 command]
[Ingest 22:52:04 INFO] Sending XML status message
[Status 22:52:04 INFO] Mirror angle: 0
[Mirror 22:52:04 INFO] rotating to position W
[Status 22:52:05 INFO] .SET file for ACQ96 ready
[Ingest 22:52:05 INFO] Starting acquisition
[Status 22:52:06 INFO] reading housekeeping
[Status 22:52:23 INFO] acquire complete
[Status 22:52:24 INFO] writing housekeeping
[Sequencer 22:52:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:52:24 INFO] incremented W scene to 402 completed views
[Sequencer 22:52:24 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:52:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:52:24 INFO] incremented to [AERI set: name X402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:52:24 INFO] W402.SIG(18)
[sigmove 22:52:24 DEBUG] transformed W402Ma.SPC -> W402MA.SPC
[sigmove 22:52:24 DEBUG] transformed W402Mb.SPC -> W402MB.SPC
[sigmove 22:52:24 DEBUG] transformed W402Mc.SPC -> W402MC.SPC
[sigmove 22:52:24 DEBUG] transformed W402Md.SPC -> W402MD.SPC
[sigmove 22:52:24 DEBUG] transformed W402Me.SPC -> W402ME.SPC
[sigmove 22:52:24 DEBUG] transformed W402Mf.SPC -> W402MF.SPC
[Status 22:52:24 INFO] data for W402 transferred to science data processing
[Tidy 22:52:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:52:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:52:24 INFO] resetting WatchDogTimer
[Status 22:52:25 INFO] Starting Set [AERI set: name X402, 6 scans, 0 angle, D16300 command]
[Ingest 22:52:25 INFO] Sending XML status message
[Status 22:52:25 INFO] Mirror angle: 0
[Mirror 22:52:25 INFO] rotating to position X
[Status 22:52:26 INFO] .SET file for ACQ96 ready
[Ingest 22:52:26 INFO] Starting acquisition
[Status 22:52:27 INFO] reading housekeeping
[Status 22:52:44 INFO] acquire complete
[Status 22:52:46 INFO] writing housekeeping
[Sequencer 22:52:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:52:46 INFO] incremented X scene to 402 completed views
[Sequencer 22:52:46 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:52:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:52:46 INFO] incremented to [AERI set: name Y402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:52:46 INFO] X402.SIG(18)
[sigmove 22:52:46 DEBUG] transformed X402Ma.SPC -> X402MA.SPC
[sigmove 22:52:46 DEBUG] transformed X402Mb.SPC -> X402MB.SPC
[sigmove 22:52:46 DEBUG] transformed X402Mc.SPC -> X402MC.SPC
[sigmove 22:52:46 DEBUG] transformed X402Md.SPC -> X402MD.SPC
[sigmove 22:52:46 DEBUG] transformed X402Me.SPC -> X402ME.SPC
[sigmove 22:52:46 DEBUG] transformed X402Mf.SPC -> X402MF.SPC
[Status 22:52:46 INFO] data for X402 transferred to science data processing
[Tidy 22:52:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:52:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:52:46 INFO] resetting WatchDogTimer
[Status 22:52:46 INFO] Starting Set [AERI set: name Y402, 6 scans, 0 angle, D16300 command]
[Ingest 22:52:46 INFO] Sending XML status message
[Status 22:52:46 INFO] Mirror angle: 0
[Mirror 22:52:47 INFO] rotating to position Y
[Status 22:52:47 INFO] .SET file for ACQ96 ready
[Ingest 22:52:48 INFO] Starting acquisition
[Status 22:52:48 INFO] reading housekeeping
[Status 22:53:06 INFO] acquire complete
[Status 22:53:07 INFO] writing housekeeping
[Sequencer 22:53:07 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:53:07 INFO] incremented Y scene to 402 completed views
[Sequencer 22:53:07 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:53:07 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:53:07 INFO] incremented to [AERI set: name Z402, 6 scans, 0 angle, D16300 command] set
[sigmove 22:53:07 INFO] Y402.SIG(18)
[sigmove 22:53:07 DEBUG] transformed Y402Ma.SPC -> Y402MA.SPC
[sigmove 22:53:07 DEBUG] transformed Y402Mb.SPC -> Y402MB.SPC
[sigmove 22:53:07 DEBUG] transformed Y402Mc.SPC -> Y402MC.SPC
[sigmove 22:53:07 DEBUG] transformed Y402Md.SPC -> Y402MD.SPC
[sigmove 22:53:07 DEBUG] transformed Y402Me.SPC -> Y402ME.SPC
[sigmove 22:53:07 DEBUG] transformed Y402Mf.SPC -> Y402MF.SPC
[Status 22:53:07 INFO] data for Y402 transferred to science data processing
[Tidy 22:53:07 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:53:07 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:53:07 INFO] resetting WatchDogTimer
[Status 22:53:07 INFO] Starting Set [AERI set: name Z402, 6 scans, 0 angle, D16300 command]
[Ingest 22:53:08 INFO] Sending XML status message
[Status 22:53:08 INFO] Mirror angle: 0
[Mirror 22:53:08 INFO] rotating to position Z
[Status 22:53:09 INFO] .SET file for ACQ96 ready
[Ingest 22:53:09 INFO] Starting acquisition
[Status 22:53:10 INFO] reading housekeeping
[Status 22:53:27 INFO] acquire complete
[Status 22:53:28 INFO] writing housekeeping
[Sequencer 22:53:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:53:28 INFO] incremented Z scene to 402 completed views
[Sequencer 22:53:28 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:53:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:53:28 INFO] incremented to [AERI set: name H403, 6 scans, 60 angle, D22500 command] set
[sigmove 22:53:28 INFO] Z402.SIG(18)
[sigmove 22:53:28 DEBUG] transformed Z402Ma.SPC -> Z402MA.SPC
[sigmove 22:53:28 DEBUG] transformed Z402Mb.SPC -> Z402MB.SPC
[sigmove 22:53:28 DEBUG] transformed Z402Mc.SPC -> Z402MC.SPC
[sigmove 22:53:28 DEBUG] transformed Z402Md.SPC -> Z402MD.SPC
[sigmove 22:53:28 DEBUG] transformed Z402Me.SPC -> Z402ME.SPC
[sigmove 22:53:28 DEBUG] transformed Z402Mf.SPC -> Z402MF.SPC
[Status 22:53:28 INFO] data for Z402 transferred to science data processing
[Tidy 22:53:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:53:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:53:28 INFO] resetting WatchDogTimer
[Status 22:53:29 INFO] Starting Set [AERI set: name H403, 6 scans, 60 angle, D22500 command]
[Ingest 22:53:29 INFO] Sending XML status message
[Status 22:53:29 INFO] Mirror angle: 60
[Mirror 22:53:29 INFO] rotating to position H
[Status 22:53:31 INFO] .SET file for ACQ96 ready
[Ingest 22:53:31 INFO] Starting acquisition
[Status 22:53:32 INFO] reading housekeeping
[Status 22:53:49 INFO] acquire complete
[Status 22:53:51 INFO] writing housekeeping
[Sequencer 22:53:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:53:51 INFO] incremented H scene to 403 completed views
[Sequencer 22:53:51 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:53:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:53:51 INFO] incremented to [AERI set: name A403, 6 scans, 120 angle, D28300 command] set
[sigmove 22:53:51 INFO] H403.SIG(18)
[sigmove 22:53:51 DEBUG] transformed H403Ma.SPC -> H403MA.SPC
[sigmove 22:53:51 DEBUG] transformed H403Mb.SPC -> H403MB.SPC
[sigmove 22:53:51 DEBUG] transformed H403Mc.SPC -> H403MC.SPC
[sigmove 22:53:51 DEBUG] transformed H403Md.SPC -> H403MD.SPC
[sigmove 22:53:51 DEBUG] transformed H403Me.SPC -> H403ME.SPC
[sigmove 22:53:51 DEBUG] transformed H403Mf.SPC -> H403MF.SPC
[Status 22:53:51 INFO] data for H403 transferred to science data processing
[Tidy 22:53:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:53:51 INFO] A401.FIN(19),H401.FIN(19),S401.FIN(19),T401.FIN(19),U401.FIN(19),V401.FIN(19),W401.FIN(19),X401.FIN(19),Y401.FIN(19),Z401.FIN(19),A402.FIN(19),H402.FIN(19),S402.FIN(19),T402.FIN(19),U402.FIN(19),V402.FIN(19),W402.FIN(19),X402.FIN(19),Y402.FIN(19),Z402.FIN(19)
[sigmove 22:53:51 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:53:51 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 22:53:58 DEBUG] done zipping
[WatchDog 22:53:58 INFO] resetting WatchDogTimer
[Status 22:53:59 INFO] Starting Set [AERI set: name A403, 6 scans, 120 angle, D28300 command]
[Ingest 22:53:59 INFO] Sending XML status message
[Status 22:53:59 INFO] Mirror angle: 120
[Mirror 22:53:59 INFO] rotating to position A
[Status 22:54:00 INFO] .SET file for ACQ96 ready
[Ingest 22:54:01 INFO] Starting acquisition
[Status 22:54:01 INFO] reading housekeeping
[Status 22:54:19 INFO] acquire complete
[Status 22:54:20 INFO] writing housekeeping
[Sequencer 22:54:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:54:20 INFO] incremented A scene to 403 completed views
[Sequencer 22:54:20 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:54:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:54:20 INFO] incremented to [AERI set: name S403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:54:20 INFO] A403.SIG(18)
[sigmove 22:54:20 DEBUG] transformed A403Ma.SPC -> A403MA.SPC
[sigmove 22:54:20 DEBUG] transformed A403Mb.SPC -> A403MB.SPC
[sigmove 22:54:20 DEBUG] transformed A403Mc.SPC -> A403MC.SPC
[sigmove 22:54:20 DEBUG] transformed A403Md.SPC -> A403MD.SPC
[sigmove 22:54:20 DEBUG] transformed A403Me.SPC -> A403ME.SPC
[sigmove 22:54:20 DEBUG] transformed A403Mf.SPC -> A403MF.SPC
[Status 22:54:20 INFO] data for A403 transferred to science data processing
[Tidy 22:54:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:54:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:54:20 INFO] resetting WatchDogTimer
[Status 22:54:20 INFO] Starting Set [AERI set: name S403, 6 scans, 0 angle, D16300 command]
[Ingest 22:54:20 INFO] Sending XML status message
[Status 22:54:20 INFO] Mirror angle: 0
[Mirror 22:54:21 INFO] rotating to position S
[Status 22:54:23 INFO] .SET file for ACQ96 ready
[Ingest 22:54:23 INFO] Starting acquisition
[Status 22:54:24 INFO] reading housekeeping
[Status 22:54:41 INFO] acquire complete
[Status 22:54:42 INFO] writing housekeeping
[Sequencer 22:54:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:54:42 INFO] incremented S scene to 403 completed views
[Sequencer 22:54:42 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:54:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:54:42 INFO] incremented to [AERI set: name T403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:54:42 INFO] S403.SIG(18)
[sigmove 22:54:42 DEBUG] transformed S403Ma.SPC -> S403MA.SPC
[sigmove 22:54:42 DEBUG] transformed S403Mb.SPC -> S403MB.SPC
[sigmove 22:54:42 DEBUG] transformed S403Mc.SPC -> S403MC.SPC
[sigmove 22:54:42 DEBUG] transformed S403Md.SPC -> S403MD.SPC
[sigmove 22:54:42 DEBUG] transformed S403Me.SPC -> S403ME.SPC
[sigmove 22:54:42 DEBUG] transformed S403Mf.SPC -> S403MF.SPC
[Status 22:54:42 INFO] data for S403 transferred to science data processing
[Tidy 22:54:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:54:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:54:42 INFO] resetting WatchDogTimer
[Status 22:54:43 INFO] Starting Set [AERI set: name T403, 6 scans, 0 angle, D16300 command]
[Ingest 22:54:43 INFO] Sending XML status message
[Status 22:54:43 INFO] Mirror angle: 0
[Mirror 22:54:43 INFO] rotating to position T
[Status 22:54:44 INFO] .SET file for ACQ96 ready
[Ingest 22:54:44 INFO] Starting acquisition
[Status 22:54:45 INFO] reading housekeeping
[Status 22:55:02 INFO] acquire complete
[Status 22:55:04 INFO] writing housekeeping
[Sequencer 22:55:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:55:04 INFO] incremented T scene to 403 completed views
[Sequencer 22:55:04 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:55:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:55:04 INFO] incremented to [AERI set: name U403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:55:04 INFO] T403.SIG(18)
[sigmove 22:55:04 DEBUG] transformed T403Ma.SPC -> T403MA.SPC
[sigmove 22:55:04 DEBUG] transformed T403Mb.SPC -> T403MB.SPC
[sigmove 22:55:04 DEBUG] transformed T403Mc.SPC -> T403MC.SPC
[sigmove 22:55:04 DEBUG] transformed T403Md.SPC -> T403MD.SPC
[sigmove 22:55:04 DEBUG] transformed T403Me.SPC -> T403ME.SPC
[sigmove 22:55:04 DEBUG] transformed T403Mf.SPC -> T403MF.SPC
[Status 22:55:04 INFO] data for T403 transferred to science data processing
[Tidy 22:55:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:55:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:55:04 INFO] resetting WatchDogTimer
[Status 22:55:04 INFO] Starting Set [AERI set: name U403, 6 scans, 0 angle, D16300 command]
[Ingest 22:55:04 INFO] Sending XML status message
[Status 22:55:04 INFO] Mirror angle: 0
[Mirror 22:55:05 INFO] rotating to position U
[Status 22:55:05 INFO] .SET file for ACQ96 ready
[Ingest 22:55:06 INFO] Starting acquisition
[Status 22:55:06 INFO] reading housekeeping
[Status 22:55:24 INFO] acquire complete
[Status 22:55:25 INFO] writing housekeeping
[Sequencer 22:55:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:55:25 INFO] incremented U scene to 403 completed views
[Sequencer 22:55:25 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:55:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:55:25 INFO] incremented to [AERI set: name V403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:55:25 INFO] U403.SIG(18)
[sigmove 22:55:25 DEBUG] transformed U403Ma.SPC -> U403MA.SPC
[sigmove 22:55:25 DEBUG] transformed U403Mb.SPC -> U403MB.SPC
[sigmove 22:55:25 DEBUG] transformed U403Mc.SPC -> U403MC.SPC
[sigmove 22:55:25 DEBUG] transformed U403Md.SPC -> U403MD.SPC
[sigmove 22:55:25 DEBUG] transformed U403Me.SPC -> U403ME.SPC
[sigmove 22:55:25 DEBUG] transformed U403Mf.SPC -> U403MF.SPC
[Status 22:55:25 INFO] data for U403 transferred to science data processing
[Tidy 22:55:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:55:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:55:25 INFO] resetting WatchDogTimer
[Status 22:55:26 INFO] Starting Set [AERI set: name V403, 6 scans, 0 angle, D16300 command]
[Ingest 22:55:26 INFO] Sending XML status message
[Status 22:55:26 INFO] Mirror angle: 0
[Mirror 22:55:26 INFO] rotating to position V
[Status 22:55:27 INFO] .SET file for ACQ96 ready
[Ingest 22:55:27 INFO] Starting acquisition
[Status 22:55:28 INFO] reading housekeeping
[Status 22:55:45 INFO] acquire complete
[Status 22:55:46 INFO] writing housekeeping
[Sequencer 22:55:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:55:46 INFO] incremented V scene to 403 completed views
[Sequencer 22:55:46 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:55:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:55:46 INFO] incremented to [AERI set: name W403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:55:46 INFO] V403.SIG(18)
[sigmove 22:55:46 DEBUG] transformed V403Ma.SPC -> V403MA.SPC
[sigmove 22:55:46 DEBUG] transformed V403Mb.SPC -> V403MB.SPC
[sigmove 22:55:46 DEBUG] transformed V403Mc.SPC -> V403MC.SPC
[sigmove 22:55:46 DEBUG] transformed V403Md.SPC -> V403MD.SPC
[sigmove 22:55:46 DEBUG] transformed V403Me.SPC -> V403ME.SPC
[sigmove 22:55:46 DEBUG] transformed V403Mf.SPC -> V403MF.SPC
[Status 22:55:46 INFO] data for V403 transferred to science data processing
[Tidy 22:55:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:55:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:55:46 INFO] resetting WatchDogTimer
[Status 22:55:47 INFO] Starting Set [AERI set: name W403, 6 scans, 0 angle, D16300 command]
[Ingest 22:55:47 INFO] Sending XML status message
[Status 22:55:47 INFO] Mirror angle: 0
[Mirror 22:55:47 INFO] rotating to position W
[Status 22:55:48 INFO] .SET file for ACQ96 ready
[Ingest 22:55:48 INFO] Starting acquisition
[Status 22:55:49 INFO] reading housekeeping
[Status 22:56:06 INFO] acquire complete
[Status 22:56:08 INFO] writing housekeeping
[Sequencer 22:56:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:56:08 INFO] incremented W scene to 403 completed views
[Sequencer 22:56:08 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:56:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:56:08 INFO] incremented to [AERI set: name X403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:56:08 INFO] W403.SIG(18)
[sigmove 22:56:08 DEBUG] transformed W403Ma.SPC -> W403MA.SPC
[sigmove 22:56:08 DEBUG] transformed W403Mb.SPC -> W403MB.SPC
[sigmove 22:56:08 DEBUG] transformed W403Mc.SPC -> W403MC.SPC
[sigmove 22:56:08 DEBUG] transformed W403Md.SPC -> W403MD.SPC
[sigmove 22:56:08 DEBUG] transformed W403Me.SPC -> W403ME.SPC
[sigmove 22:56:08 DEBUG] transformed W403Mf.SPC -> W403MF.SPC
[Status 22:56:08 INFO] data for W403 transferred to science data processing
[Tidy 22:56:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:56:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:56:08 INFO] resetting WatchDogTimer
[Status 22:56:08 INFO] Starting Set [AERI set: name X403, 6 scans, 0 angle, D16300 command]
[Ingest 22:56:08 INFO] Sending XML status message
[Status 22:56:08 INFO] Mirror angle: 0
[Mirror 22:56:09 INFO] rotating to position X
[Status 22:56:09 INFO] .SET file for ACQ96 ready
[Ingest 22:56:10 INFO] Starting acquisition
[Status 22:56:10 INFO] reading housekeeping
[Status 22:56:28 INFO] acquire complete
[Status 22:56:29 INFO] writing housekeeping
[Sequencer 22:56:29 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:56:29 INFO] incremented X scene to 403 completed views
[Sequencer 22:56:29 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:56:29 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:56:29 INFO] incremented to [AERI set: name Y403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:56:29 INFO] X403.SIG(18)
[sigmove 22:56:29 DEBUG] transformed X403Ma.SPC -> X403MA.SPC
[sigmove 22:56:29 DEBUG] transformed X403Mb.SPC -> X403MB.SPC
[sigmove 22:56:29 DEBUG] transformed X403Mc.SPC -> X403MC.SPC
[sigmove 22:56:29 DEBUG] transformed X403Md.SPC -> X403MD.SPC
[sigmove 22:56:29 DEBUG] transformed X403Me.SPC -> X403ME.SPC
[sigmove 22:56:29 DEBUG] transformed X403Mf.SPC -> X403MF.SPC
[Status 22:56:29 INFO] data for X403 transferred to science data processing
[Tidy 22:56:29 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:56:29 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:56:29 INFO] resetting WatchDogTimer
[Status 22:56:29 INFO] Starting Set [AERI set: name Y403, 6 scans, 0 angle, D16300 command]
[Ingest 22:56:29 INFO] Sending XML status message
[Status 22:56:29 INFO] Mirror angle: 0
[Mirror 22:56:30 INFO] rotating to position Y
[Status 22:56:31 INFO] .SET file for ACQ96 ready
[Ingest 22:56:31 INFO] Starting acquisition
[Status 22:56:32 INFO] reading housekeeping
[Status 22:56:49 INFO] acquire complete
[Status 22:56:50 INFO] writing housekeeping
[Sequencer 22:56:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:56:50 INFO] incremented Y scene to 403 completed views
[Sequencer 22:56:50 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:56:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:56:50 INFO] incremented to [AERI set: name Z403, 6 scans, 0 angle, D16300 command] set
[sigmove 22:56:50 INFO] Y403.SIG(18)
[sigmove 22:56:50 DEBUG] transformed Y403Ma.SPC -> Y403MA.SPC
[sigmove 22:56:50 DEBUG] transformed Y403Mb.SPC -> Y403MB.SPC
[sigmove 22:56:50 DEBUG] transformed Y403Mc.SPC -> Y403MC.SPC
[sigmove 22:56:50 DEBUG] transformed Y403Md.SPC -> Y403MD.SPC
[sigmove 22:56:50 DEBUG] transformed Y403Me.SPC -> Y403ME.SPC
[sigmove 22:56:50 DEBUG] transformed Y403Mf.SPC -> Y403MF.SPC
[Status 22:56:50 INFO] data for Y403 transferred to science data processing
[Tidy 22:56:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:56:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:56:50 INFO] resetting WatchDogTimer
[Status 22:56:51 INFO] Starting Set [AERI set: name Z403, 6 scans, 0 angle, D16300 command]
[Ingest 22:56:51 INFO] Sending XML status message
[Status 22:56:51 INFO] Mirror angle: 0
[Mirror 22:56:51 INFO] rotating to position Z
[Status 22:56:52 INFO] .SET file for ACQ96 ready
[Ingest 22:56:52 INFO] Starting acquisition
[Status 22:56:53 INFO] reading housekeeping
[Status 22:57:10 INFO] acquire complete
[Status 22:57:11 INFO] writing housekeeping
[Sequencer 22:57:11 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:57:11 INFO] incremented Z scene to 403 completed views
[Sequencer 22:57:11 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 22:57:11 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:57:11 INFO] incremented to [AERI set: name A404, 6 scans, 120 angle, D28300 command] set
[sigmove 22:57:11 INFO] Z403.SIG(18)
[sigmove 22:57:11 DEBUG] transformed Z403Ma.SPC -> Z403MA.SPC
[sigmove 22:57:11 DEBUG] transformed Z403Mb.SPC -> Z403MB.SPC
[sigmove 22:57:11 DEBUG] transformed Z403Mc.SPC -> Z403MC.SPC
[sigmove 22:57:12 DEBUG] transformed Z403Md.SPC -> Z403MD.SPC
[sigmove 22:57:12 DEBUG] transformed Z403Me.SPC -> Z403ME.SPC
[sigmove 22:57:12 DEBUG] transformed Z403Mf.SPC -> Z403MF.SPC
[Status 22:57:12 INFO] data for Z403 transferred to science data processing
[Tidy 22:57:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:57:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:57:12 INFO] resetting WatchDogTimer
[Status 22:57:12 INFO] Starting Set [AERI set: name A404, 6 scans, 120 angle, D28300 command]
[Ingest 22:57:12 INFO] Sending XML status message
[Status 22:57:12 INFO] Mirror angle: 120
[Mirror 22:57:12 INFO] rotating to position A
[Status 22:57:14 INFO] .SET file for ACQ96 ready
[Ingest 22:57:15 INFO] Starting acquisition
[Status 22:57:15 INFO] reading housekeeping
[Status 22:57:33 INFO] acquire complete
[Status 22:57:34 INFO] writing housekeeping
[Sequencer 22:57:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:57:34 INFO] incremented A scene to 404 completed views
[Sequencer 22:57:34 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 22:57:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:57:34 INFO] incremented to [AERI set: name H404, 6 scans, 60 angle, D22500 command] set
[sigmove 22:57:34 INFO] A404.SIG(18)
[sigmove 22:57:34 DEBUG] transformed A404Ma.SPC -> A404MA.SPC
[sigmove 22:57:34 DEBUG] transformed A404Mb.SPC -> A404MB.SPC
[sigmove 22:57:34 DEBUG] transformed A404Mc.SPC -> A404MC.SPC
[sigmove 22:57:34 DEBUG] transformed A404Md.SPC -> A404MD.SPC
[sigmove 22:57:34 DEBUG] transformed A404Me.SPC -> A404ME.SPC
[sigmove 22:57:34 DEBUG] transformed A404Mf.SPC -> A404MF.SPC
[Status 22:57:34 INFO] data for A404 transferred to science data processing
[Tidy 22:57:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:57:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:57:34 INFO] resetting WatchDogTimer
[Status 22:57:35 INFO] Starting Set [AERI set: name H404, 6 scans, 60 angle, D22500 command]
[Ingest 22:57:35 INFO] Sending XML status message
[Status 22:57:35 INFO] Mirror angle: 60
[Mirror 22:57:35 INFO] rotating to position H
[Status 22:57:36 INFO] .SET file for ACQ96 ready
[Ingest 22:57:37 INFO] Starting acquisition
[Status 22:57:37 INFO] reading housekeeping
[Status 22:57:55 INFO] acquire complete
[Status 22:57:56 INFO] writing housekeeping
[Sequencer 22:57:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:57:56 INFO] incremented H scene to 404 completed views
[Sequencer 22:57:56 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 22:57:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:57:56 INFO] incremented to [AERI set: name S404, 6 scans, 0 angle, D16300 command] set
[sigmove 22:57:56 INFO] H404.SIG(18)
[sigmove 22:57:56 DEBUG] transformed H404Ma.SPC -> H404MA.SPC
[sigmove 22:57:56 DEBUG] transformed H404Mb.SPC -> H404MB.SPC
[sigmove 22:57:56 DEBUG] transformed H404Mc.SPC -> H404MC.SPC
[sigmove 22:57:56 DEBUG] transformed H404Md.SPC -> H404MD.SPC
[sigmove 22:57:56 DEBUG] transformed H404Me.SPC -> H404ME.SPC
[sigmove 22:57:56 DEBUG] transformed H404Mf.SPC -> H404MF.SPC
[Status 22:57:56 INFO] data for H404 transferred to science data processing
[Tidy 22:57:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:57:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:57:56 INFO] resetting WatchDogTimer
[Status 22:57:57 INFO] Starting Set [AERI set: name S404, 6 scans, 0 angle, D16300 command]
[Ingest 22:57:57 INFO] Sending XML status message
[Status 22:57:57 INFO] Mirror angle: 0
[Mirror 22:57:57 INFO] rotating to position S
[Status 22:57:59 INFO] .SET file for ACQ96 ready
[Ingest 22:57:59 INFO] Starting acquisition
[Status 22:58:00 INFO] reading housekeeping
[Status 22:58:18 INFO] acquire complete
[Status 22:58:19 INFO] writing housekeeping
[Sequencer 22:58:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:58:19 INFO] incremented S scene to 404 completed views
[Sequencer 22:58:19 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:58:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:58:19 INFO] incremented to [AERI set: name T404, 6 scans, 0 angle, D16300 command] set
[sigmove 22:58:19 INFO] S404.SIG(18)
[sigmove 22:58:19 DEBUG] transformed S404Ma.SPC -> S404MA.SPC
[sigmove 22:58:19 DEBUG] transformed S404Mb.SPC -> S404MB.SPC
[sigmove 22:58:19 DEBUG] transformed S404Mc.SPC -> S404MC.SPC
[sigmove 22:58:19 DEBUG] transformed S404Md.SPC -> S404MD.SPC
[sigmove 22:58:19 DEBUG] transformed S404Me.SPC -> S404ME.SPC
[sigmove 22:58:19 DEBUG] transformed S404Mf.SPC -> S404MF.SPC
[Status 22:58:19 INFO] data for S404 transferred to science data processing
[Tidy 22:58:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:58:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:58:19 INFO] resetting WatchDogTimer
[Status 22:58:19 INFO] Starting Set [AERI set: name T404, 6 scans, 0 angle, D16300 command]
[Ingest 22:58:19 INFO] Sending XML status message
[Status 22:58:19 INFO] Mirror angle: 0
[Mirror 22:58:20 INFO] rotating to position T
[Status 22:58:20 INFO] .SET file for ACQ96 ready
[Ingest 22:58:21 INFO] Starting acquisition
[Status 22:58:21 INFO] reading housekeeping
[Status 22:58:39 INFO] acquire complete
[Status 22:58:40 INFO] writing housekeeping
[Sequencer 22:58:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:58:40 INFO] incremented T scene to 404 completed views
[Sequencer 22:58:40 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:58:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:58:40 INFO] incremented to [AERI set: name U404, 6 scans, 0 angle, D16300 command] set
[sigmove 22:58:40 INFO] T404.SIG(18)
[sigmove 22:58:40 DEBUG] transformed T404Ma.SPC -> T404MA.SPC
[sigmove 22:58:40 DEBUG] transformed T404Mb.SPC -> T404MB.SPC
[sigmove 22:58:40 DEBUG] transformed T404Mc.SPC -> T404MC.SPC
[sigmove 22:58:40 DEBUG] transformed T404Md.SPC -> T404MD.SPC
[sigmove 22:58:40 DEBUG] transformed T404Me.SPC -> T404ME.SPC
[sigmove 22:58:40 DEBUG] transformed T404Mf.SPC -> T404MF.SPC
[Status 22:58:40 INFO] data for T404 transferred to science data processing
[Tidy 22:58:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:58:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:58:40 INFO] resetting WatchDogTimer
[Status 22:58:41 INFO] Starting Set [AERI set: name U404, 6 scans, 0 angle, D16300 command]
[Ingest 22:58:41 INFO] Sending XML status message
[Status 22:58:41 INFO] Mirror angle: 0
[Mirror 22:58:41 INFO] rotating to position U
[Status 22:58:42 INFO] .SET file for ACQ96 ready
[Ingest 22:58:42 INFO] Starting acquisition
[Status 22:58:43 INFO] reading housekeeping
[Status 22:59:00 INFO] acquire complete
[Status 22:59:01 INFO] writing housekeeping
[Sequencer 22:59:01 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:59:01 INFO] incremented U scene to 404 completed views
[Sequencer 22:59:01 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:59:01 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:59:01 INFO] incremented to [AERI set: name V404, 6 scans, 0 angle, D16300 command] set
[sigmove 22:59:01 INFO] U404.SIG(18)
[sigmove 22:59:01 DEBUG] transformed U404Ma.SPC -> U404MA.SPC
[sigmove 22:59:01 DEBUG] transformed U404Mb.SPC -> U404MB.SPC
[sigmove 22:59:01 DEBUG] transformed U404Mc.SPC -> U404MC.SPC
[sigmove 22:59:01 DEBUG] transformed U404Md.SPC -> U404MD.SPC
[sigmove 22:59:01 DEBUG] transformed U404Me.SPC -> U404ME.SPC
[sigmove 22:59:01 DEBUG] transformed U404Mf.SPC -> U404MF.SPC
[Status 22:59:01 INFO] data for U404 transferred to science data processing
[Tidy 22:59:01 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:59:01 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:59:01 INFO] resetting WatchDogTimer
[Status 22:59:02 INFO] Starting Set [AERI set: name V404, 6 scans, 0 angle, D16300 command]
[Ingest 22:59:02 INFO] Sending XML status message
[Status 22:59:02 INFO] Mirror angle: 0
[Mirror 22:59:02 INFO] rotating to position V
[Status 22:59:03 INFO] .SET file for ACQ96 ready
[Ingest 22:59:03 INFO] Starting acquisition
[Status 22:59:04 INFO] reading housekeeping
[Status 22:59:21 INFO] acquire complete
[Status 22:59:23 INFO] writing housekeeping
[Sequencer 22:59:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:59:23 INFO] incremented V scene to 404 completed views
[Sequencer 22:59:23 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:59:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:59:23 INFO] incremented to [AERI set: name W404, 6 scans, 0 angle, D16300 command] set
[sigmove 22:59:23 INFO] V404.SIG(18)
[sigmove 22:59:23 DEBUG] transformed V404Ma.SPC -> V404MA.SPC
[sigmove 22:59:23 DEBUG] transformed V404Mb.SPC -> V404MB.SPC
[sigmove 22:59:23 DEBUG] transformed V404Mc.SPC -> V404MC.SPC
[sigmove 22:59:23 DEBUG] transformed V404Md.SPC -> V404MD.SPC
[sigmove 22:59:23 DEBUG] transformed V404Me.SPC -> V404ME.SPC
[sigmove 22:59:23 DEBUG] transformed V404Mf.SPC -> V404MF.SPC
[Status 22:59:23 INFO] data for V404 transferred to science data processing
[Tidy 22:59:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:59:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:59:23 INFO] resetting WatchDogTimer
[Status 22:59:23 INFO] Starting Set [AERI set: name W404, 6 scans, 0 angle, D16300 command]
[Ingest 22:59:23 INFO] Sending XML status message
[Status 22:59:23 INFO] Mirror angle: 0
[Mirror 22:59:24 INFO] rotating to position W
[Status 22:59:24 INFO] .SET file for ACQ96 ready
[Ingest 22:59:25 INFO] Starting acquisition
[Status 22:59:25 INFO] reading housekeeping
[Status 22:59:43 INFO] acquire complete
[Status 22:59:44 INFO] writing housekeeping
[Sequencer 22:59:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 22:59:44 INFO] incremented W scene to 404 completed views
[Sequencer 22:59:44 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 22:59:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 22:59:44 INFO] incremented to [AERI set: name X404, 6 scans, 0 angle, D16300 command] set
[sigmove 22:59:44 INFO] W404.SIG(18)
[sigmove 22:59:44 DEBUG] transformed W404Ma.SPC -> W404MA.SPC
[sigmove 22:59:44 DEBUG] transformed W404Mb.SPC -> W404MB.SPC
[sigmove 22:59:44 DEBUG] transformed W404Mc.SPC -> W404MC.SPC
[sigmove 22:59:44 DEBUG] transformed W404Md.SPC -> W404MD.SPC
[sigmove 22:59:44 DEBUG] transformed W404Me.SPC -> W404ME.SPC
[sigmove 22:59:44 DEBUG] transformed W404Mf.SPC -> W404MF.SPC
[Status 22:59:44 INFO] data for W404 transferred to science data processing
[Tidy 22:59:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 22:59:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 22:59:44 INFO] resetting WatchDogTimer
[Status 22:59:45 INFO] Starting Set [AERI set: name X404, 6 scans, 0 angle, D16300 command]
[Ingest 22:59:45 INFO] Sending XML status message
[Status 22:59:45 INFO] Mirror angle: 0
[Mirror 22:59:45 INFO] rotating to position X
[Status 22:59:46 INFO] .SET file for ACQ96 ready
[Ingest 22:59:46 INFO] Starting acquisition
[Status 22:59:47 INFO] reading housekeeping
[Status 23:00:04 INFO] acquire complete
[Status 23:00:05 INFO] writing housekeeping
[Sequencer 23:00:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:00:05 INFO] incremented X scene to 404 completed views
[Sequencer 23:00:05 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:00:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:00:05 INFO] incremented to [AERI set: name Y404, 6 scans, 0 angle, D16300 command] set
[sigmove 23:00:05 INFO] X404.SIG(18)
[sigmove 23:00:05 DEBUG] transformed X404Ma.SPC -> X404MA.SPC
[sigmove 23:00:05 DEBUG] transformed X404Mb.SPC -> X404MB.SPC
[sigmove 23:00:05 DEBUG] transformed X404Mc.SPC -> X404MC.SPC
[sigmove 23:00:05 DEBUG] transformed X404Md.SPC -> X404MD.SPC
[sigmove 23:00:05 DEBUG] transformed X404Me.SPC -> X404ME.SPC
[sigmove 23:00:05 DEBUG] transformed X404Mf.SPC -> X404MF.SPC
[Status 23:00:05 INFO] data for X404 transferred to science data processing
[Tidy 23:00:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:00:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:00:05 INFO] resetting WatchDogTimer
[Status 23:00:06 INFO] Starting Set [AERI set: name Y404, 6 scans, 0 angle, D16300 command]
[Ingest 23:00:06 INFO] Sending XML status message
[Status 23:00:06 INFO] Mirror angle: 0
[Mirror 23:00:06 INFO] rotating to position Y
[Status 23:00:07 INFO] .SET file for ACQ96 ready
[Ingest 23:00:07 INFO] Starting acquisition
[Status 23:00:08 INFO] reading housekeeping
[Status 23:00:25 INFO] acquire complete
[Status 23:00:27 INFO] writing housekeeping
[Sequencer 23:00:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:00:27 INFO] incremented Y scene to 404 completed views
[Sequencer 23:00:27 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:00:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:00:27 INFO] incremented to [AERI set: name Z404, 6 scans, 0 angle, D16300 command] set
[sigmove 23:00:27 INFO] Y404.SIG(18)
[sigmove 23:00:27 DEBUG] transformed Y404Ma.SPC -> Y404MA.SPC
[sigmove 23:00:27 DEBUG] transformed Y404Mb.SPC -> Y404MB.SPC
[sigmove 23:00:27 DEBUG] transformed Y404Mc.SPC -> Y404MC.SPC
[sigmove 23:00:27 DEBUG] transformed Y404Md.SPC -> Y404MD.SPC
[sigmove 23:00:27 DEBUG] transformed Y404Me.SPC -> Y404ME.SPC
[sigmove 23:00:27 DEBUG] transformed Y404Mf.SPC -> Y404MF.SPC
[Status 23:00:27 INFO] data for Y404 transferred to science data processing
[Tidy 23:00:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:00:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:00:27 INFO] resetting WatchDogTimer
[Status 23:00:27 INFO] Starting Set [AERI set: name Z404, 6 scans, 0 angle, D16300 command]
[Ingest 23:00:27 INFO] Sending XML status message
[Status 23:00:27 INFO] Mirror angle: 0
[Mirror 23:00:28 INFO] rotating to position Z
[Status 23:00:28 INFO] .SET file for ACQ96 ready
[Ingest 23:00:29 INFO] Starting acquisition
[Status 23:00:29 INFO] reading housekeeping
[Status 23:00:47 INFO] acquire complete
[Status 23:00:48 INFO] writing housekeeping
[Sequencer 23:00:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:00:48 INFO] incremented Z scene to 404 completed views
[Sequencer 23:00:48 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:00:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:00:48 INFO] incremented to [AERI set: name H405, 6 scans, 60 angle, D22500 command] set
[sigmove 23:00:48 INFO] Z404.SIG(18)
[sigmove 23:00:48 DEBUG] transformed Z404Ma.SPC -> Z404MA.SPC
[sigmove 23:00:48 DEBUG] transformed Z404Mb.SPC -> Z404MB.SPC
[sigmove 23:00:48 DEBUG] transformed Z404Mc.SPC -> Z404MC.SPC
[sigmove 23:00:48 DEBUG] transformed Z404Md.SPC -> Z404MD.SPC
[sigmove 23:00:48 DEBUG] transformed Z404Me.SPC -> Z404ME.SPC
[sigmove 23:00:48 DEBUG] transformed Z404Mf.SPC -> Z404MF.SPC
[Status 23:00:48 INFO] data for Z404 transferred to science data processing
[Tidy 23:00:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:00:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:00:48 INFO] resetting WatchDogTimer
[Status 23:00:48 INFO] Starting Set [AERI set: name H405, 6 scans, 60 angle, D22500 command]
[Ingest 23:00:48 INFO] Sending XML status message
[Status 23:00:48 INFO] Mirror angle: 60
[Mirror 23:00:49 INFO] rotating to position H
[Status 23:00:50 INFO] .SET file for ACQ96 ready
[Ingest 23:00:51 INFO] Starting acquisition
[Status 23:00:51 INFO] reading housekeeping
[Status 23:01:09 INFO] acquire complete
[Status 23:01:10 INFO] writing housekeeping
[Sequencer 23:01:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:01:10 INFO] incremented H scene to 405 completed views
[Sequencer 23:01:10 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:01:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:01:10 INFO] incremented to [AERI set: name A405, 6 scans, 120 angle, D28300 command] set
[sigmove 23:01:10 INFO] H405.SIG(18)
[sigmove 23:01:10 DEBUG] transformed H405Ma.SPC -> H405MA.SPC
[sigmove 23:01:10 DEBUG] transformed H405Mb.SPC -> H405MB.SPC
[sigmove 23:01:10 DEBUG] transformed H405Mc.SPC -> H405MC.SPC
[sigmove 23:01:10 DEBUG] transformed H405Md.SPC -> H405MD.SPC
[sigmove 23:01:10 DEBUG] transformed H405Me.SPC -> H405ME.SPC
[sigmove 23:01:10 DEBUG] transformed H405Mf.SPC -> H405MF.SPC
[Status 23:01:10 INFO] data for H405 transferred to science data processing
[Tidy 23:01:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:01:10 INFO] A403.FIN(19),H403.FIN(19),S403.FIN(19),T403.FIN(19),U403.FIN(19),V403.FIN(19),W403.FIN(19),X403.FIN(19),Y403.FIN(19),Z403.FIN(19),A404.FIN(19),H404.FIN(19),S404.FIN(19),T404.FIN(19),U404.FIN(19),V404.FIN(19),W404.FIN(19),X404.FIN(19),Y404.FIN(19),Z404.FIN(19)
[sigmove 23:01:10 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:01:10 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:01:17 DEBUG] done zipping
[WatchDog 23:01:18 INFO] resetting WatchDogTimer
[Status 23:01:18 INFO] Starting Set [AERI set: name A405, 6 scans, 120 angle, D28300 command]
[Ingest 23:01:18 INFO] Sending XML status message
[Status 23:01:18 INFO] Mirror angle: 120
[Mirror 23:01:19 INFO] rotating to position A
[Status 23:01:20 INFO] .SET file for ACQ96 ready
[Ingest 23:01:20 INFO] Starting acquisition
[Status 23:01:21 INFO] reading housekeeping
[Status 23:01:38 INFO] acquire complete
[Status 23:01:40 INFO] writing housekeeping
[Sequencer 23:01:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:01:40 INFO] incremented A scene to 405 completed views
[Sequencer 23:01:40 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:01:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:01:40 INFO] incremented to [AERI set: name S405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:01:40 INFO] A405.SIG(18)
[sigmove 23:01:40 DEBUG] transformed A405Ma.SPC -> A405MA.SPC
[sigmove 23:01:40 DEBUG] transformed A405Mb.SPC -> A405MB.SPC
[sigmove 23:01:40 DEBUG] transformed A405Mc.SPC -> A405MC.SPC
[sigmove 23:01:40 DEBUG] transformed A405Md.SPC -> A405MD.SPC
[sigmove 23:01:40 DEBUG] transformed A405Me.SPC -> A405ME.SPC
[sigmove 23:01:40 DEBUG] transformed A405Mf.SPC -> A405MF.SPC
[Status 23:01:40 INFO] data for A405 transferred to science data processing
[Tidy 23:01:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:01:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:01:40 INFO] resetting WatchDogTimer
[Status 23:01:40 INFO] Starting Set [AERI set: name S405, 6 scans, 0 angle, D16300 command]
[Ingest 23:01:40 INFO] Sending XML status message
[Status 23:01:40 INFO] Mirror angle: 0
[Mirror 23:01:41 INFO] rotating to position S
[Status 23:01:42 INFO] .SET file for ACQ96 ready
[Ingest 23:01:43 INFO] Starting acquisition
[Status 23:01:43 INFO] reading housekeeping
[Status 23:02:01 INFO] acquire complete
[Status 23:02:02 INFO] writing housekeeping
[Sequencer 23:02:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:02:02 INFO] incremented S scene to 405 completed views
[Sequencer 23:02:02 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:02:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:02:02 INFO] incremented to [AERI set: name T405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:02:02 INFO] S405.SIG(18)
[sigmove 23:02:02 DEBUG] transformed S405Ma.SPC -> S405MA.SPC
[sigmove 23:02:02 DEBUG] transformed S405Mb.SPC -> S405MB.SPC
[sigmove 23:02:02 DEBUG] transformed S405Mc.SPC -> S405MC.SPC
[sigmove 23:02:02 DEBUG] transformed S405Md.SPC -> S405MD.SPC
[sigmove 23:02:02 DEBUG] transformed S405Me.SPC -> S405ME.SPC
[sigmove 23:02:02 DEBUG] transformed S405Mf.SPC -> S405MF.SPC
[Status 23:02:02 INFO] data for S405 transferred to science data processing
[Tidy 23:02:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:02:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:02:02 INFO] resetting WatchDogTimer
[Status 23:02:03 INFO] Starting Set [AERI set: name T405, 6 scans, 0 angle, D16300 command]
[Ingest 23:02:03 INFO] Sending XML status message
[Status 23:02:03 INFO] Mirror angle: 0
[Mirror 23:02:03 INFO] rotating to position T
[Status 23:02:04 INFO] .SET file for ACQ96 ready
[Ingest 23:02:04 INFO] Starting acquisition
[Status 23:02:05 INFO] reading housekeeping
[Status 23:02:22 INFO] acquire complete
[Status 23:02:23 INFO] writing housekeeping
[Sequencer 23:02:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:02:23 INFO] incremented T scene to 405 completed views
[Sequencer 23:02:23 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:02:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:02:23 INFO] incremented to [AERI set: name U405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:02:23 INFO] T405.SIG(18)
[sigmove 23:02:23 DEBUG] transformed T405Ma.SPC -> T405MA.SPC
[sigmove 23:02:23 DEBUG] transformed T405Mb.SPC -> T405MB.SPC
[sigmove 23:02:23 DEBUG] transformed T405Mc.SPC -> T405MC.SPC
[sigmove 23:02:23 DEBUG] transformed T405Md.SPC -> T405MD.SPC
[sigmove 23:02:23 DEBUG] transformed T405Me.SPC -> T405ME.SPC
[sigmove 23:02:23 DEBUG] transformed T405Mf.SPC -> T405MF.SPC
[Status 23:02:23 INFO] data for T405 transferred to science data processing
[Tidy 23:02:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:02:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:02:23 INFO] resetting WatchDogTimer
[Status 23:02:24 INFO] Starting Set [AERI set: name U405, 6 scans, 0 angle, D16300 command]
[Ingest 23:02:24 INFO] Sending XML status message
[Status 23:02:24 INFO] Mirror angle: 0
[Mirror 23:02:24 INFO] rotating to position U
[Status 23:02:25 INFO] .SET file for ACQ96 ready
[Ingest 23:02:25 INFO] Starting acquisition
[Status 23:02:26 INFO] reading housekeeping
[Status 23:02:43 INFO] acquire complete
[Status 23:02:45 INFO] writing housekeeping
[Sequencer 23:02:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:02:45 INFO] incremented U scene to 405 completed views
[Sequencer 23:02:45 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:02:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:02:45 INFO] incremented to [AERI set: name V405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:02:45 INFO] U405.SIG(18)
[sigmove 23:02:45 DEBUG] transformed U405Ma.SPC -> U405MA.SPC
[sigmove 23:02:45 DEBUG] transformed U405Mb.SPC -> U405MB.SPC
[sigmove 23:02:45 DEBUG] transformed U405Mc.SPC -> U405MC.SPC
[sigmove 23:02:45 DEBUG] transformed U405Md.SPC -> U405MD.SPC
[sigmove 23:02:45 DEBUG] transformed U405Me.SPC -> U405ME.SPC
[sigmove 23:02:45 DEBUG] transformed U405Mf.SPC -> U405MF.SPC
[Status 23:02:45 INFO] data for U405 transferred to science data processing
[Tidy 23:02:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:02:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:02:45 INFO] resetting WatchDogTimer
[Status 23:02:45 INFO] Starting Set [AERI set: name V405, 6 scans, 0 angle, D16300 command]
[Ingest 23:02:45 INFO] Sending XML status message
[Status 23:02:45 INFO] Mirror angle: 0
[Mirror 23:02:46 INFO] rotating to position V
[Status 23:02:46 INFO] .SET file for ACQ96 ready
[Ingest 23:02:47 INFO] Starting acquisition
[Status 23:02:47 INFO] reading housekeeping
[Status 23:03:05 INFO] acquire complete
[Status 23:03:06 INFO] writing housekeeping
[Sequencer 23:03:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:03:06 INFO] incremented V scene to 405 completed views
[Sequencer 23:03:06 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:03:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:03:06 INFO] incremented to [AERI set: name W405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:03:06 INFO] V405.SIG(18)
[sigmove 23:03:06 DEBUG] transformed V405Ma.SPC -> V405MA.SPC
[sigmove 23:03:06 DEBUG] transformed V405Mb.SPC -> V405MB.SPC
[sigmove 23:03:06 DEBUG] transformed V405Mc.SPC -> V405MC.SPC
[sigmove 23:03:06 DEBUG] transformed V405Md.SPC -> V405MD.SPC
[sigmove 23:03:06 DEBUG] transformed V405Me.SPC -> V405ME.SPC
[sigmove 23:03:06 DEBUG] transformed V405Mf.SPC -> V405MF.SPC
[Status 23:03:06 INFO] data for V405 transferred to science data processing
[Tidy 23:03:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:03:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:03:06 INFO] resetting WatchDogTimer
[Status 23:03:06 INFO] Starting Set [AERI set: name W405, 6 scans, 0 angle, D16300 command]
[Ingest 23:03:06 INFO] Sending XML status message
[Status 23:03:06 INFO] Mirror angle: 0
[Mirror 23:03:07 INFO] rotating to position W
[Status 23:03:08 INFO] .SET file for ACQ96 ready
[Ingest 23:03:08 INFO] Starting acquisition
[Status 23:03:09 INFO] reading housekeeping
[Status 23:03:26 INFO] acquire complete
[Status 23:03:27 INFO] writing housekeeping
[Sequencer 23:03:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:03:27 INFO] incremented W scene to 405 completed views
[Sequencer 23:03:27 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:03:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:03:27 INFO] incremented to [AERI set: name X405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:03:27 INFO] W405.SIG(18)
[sigmove 23:03:27 DEBUG] transformed W405Ma.SPC -> W405MA.SPC
[sigmove 23:03:27 DEBUG] transformed W405Mb.SPC -> W405MB.SPC
[sigmove 23:03:27 DEBUG] transformed W405Mc.SPC -> W405MC.SPC
[sigmove 23:03:27 DEBUG] transformed W405Md.SPC -> W405MD.SPC
[sigmove 23:03:27 DEBUG] transformed W405Me.SPC -> W405ME.SPC
[sigmove 23:03:27 DEBUG] transformed W405Mf.SPC -> W405MF.SPC
[Status 23:03:27 INFO] data for W405 transferred to science data processing
[Tidy 23:03:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:03:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:03:27 INFO] resetting WatchDogTimer
[Status 23:03:28 INFO] Starting Set [AERI set: name X405, 6 scans, 0 angle, D16300 command]
[Ingest 23:03:28 INFO] Sending XML status message
[Status 23:03:28 INFO] Mirror angle: 0
[Mirror 23:03:28 INFO] rotating to position X
[Status 23:03:29 INFO] .SET file for ACQ96 ready
[Ingest 23:03:29 INFO] Starting acquisition
[Status 23:03:30 INFO] reading housekeeping
[Status 23:03:47 INFO] acquire complete
[Status 23:03:49 INFO] writing housekeeping
[Sequencer 23:03:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:03:49 INFO] incremented X scene to 405 completed views
[Sequencer 23:03:49 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:03:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:03:49 INFO] incremented to [AERI set: name Y405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:03:49 INFO] X405.SIG(18)
[sigmove 23:03:49 DEBUG] transformed X405Ma.SPC -> X405MA.SPC
[sigmove 23:03:49 DEBUG] transformed X405Mb.SPC -> X405MB.SPC
[sigmove 23:03:49 DEBUG] transformed X405Mc.SPC -> X405MC.SPC
[sigmove 23:03:49 DEBUG] transformed X405Md.SPC -> X405MD.SPC
[sigmove 23:03:49 DEBUG] transformed X405Me.SPC -> X405ME.SPC
[sigmove 23:03:49 DEBUG] transformed X405Mf.SPC -> X405MF.SPC
[Status 23:03:49 INFO] data for X405 transferred to science data processing
[Tidy 23:03:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:03:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:03:49 INFO] resetting WatchDogTimer
[Status 23:03:49 INFO] Starting Set [AERI set: name Y405, 6 scans, 0 angle, D16300 command]
[Ingest 23:03:49 INFO] Sending XML status message
[Status 23:03:49 INFO] Mirror angle: 0
[Mirror 23:03:50 INFO] rotating to position Y
[Status 23:03:50 INFO] .SET file for ACQ96 ready
[Ingest 23:03:51 INFO] Starting acquisition
[Status 23:03:51 INFO] reading housekeeping
[Status 23:04:09 INFO] acquire complete
[Status 23:04:10 INFO] writing housekeeping
[Sequencer 23:04:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:04:10 INFO] incremented Y scene to 405 completed views
[Sequencer 23:04:10 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:04:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:04:10 INFO] incremented to [AERI set: name Z405, 6 scans, 0 angle, D16300 command] set
[sigmove 23:04:10 INFO] Y405.SIG(18)
[sigmove 23:04:10 DEBUG] transformed Y405Ma.SPC -> Y405MA.SPC
[sigmove 23:04:10 DEBUG] transformed Y405Mb.SPC -> Y405MB.SPC
[sigmove 23:04:10 DEBUG] transformed Y405Mc.SPC -> Y405MC.SPC
[sigmove 23:04:10 DEBUG] transformed Y405Md.SPC -> Y405MD.SPC
[sigmove 23:04:10 DEBUG] transformed Y405Me.SPC -> Y405ME.SPC
[sigmove 23:04:10 DEBUG] transformed Y405Mf.SPC -> Y405MF.SPC
[Status 23:04:10 INFO] data for Y405 transferred to science data processing
[Tidy 23:04:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:04:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:04:10 INFO] resetting WatchDogTimer
[Status 23:04:10 INFO] Starting Set [AERI set: name Z405, 6 scans, 0 angle, D16300 command]
[Ingest 23:04:10 INFO] Sending XML status message
[Status 23:04:10 INFO] Mirror angle: 0
[Mirror 23:04:11 INFO] rotating to position Z
[Status 23:04:12 INFO] .SET file for ACQ96 ready
[Ingest 23:04:12 INFO] Starting acquisition
[Status 23:04:13 INFO] reading housekeeping
[Status 23:04:30 INFO] acquire complete
[Status 23:04:31 INFO] writing housekeeping
[Sequencer 23:04:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:04:31 INFO] incremented Z scene to 405 completed views
[Sequencer 23:04:31 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:04:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:04:31 INFO] incremented to [AERI set: name A406, 6 scans, 120 angle, D28300 command] set
[sigmove 23:04:31 INFO] Z405.SIG(18)
[sigmove 23:04:31 DEBUG] transformed Z405Ma.SPC -> Z405MA.SPC
[sigmove 23:04:31 DEBUG] transformed Z405Mb.SPC -> Z405MB.SPC
[sigmove 23:04:31 DEBUG] transformed Z405Mc.SPC -> Z405MC.SPC
[sigmove 23:04:31 DEBUG] transformed Z405Md.SPC -> Z405MD.SPC
[sigmove 23:04:31 DEBUG] transformed Z405Me.SPC -> Z405ME.SPC
[sigmove 23:04:31 DEBUG] transformed Z405Mf.SPC -> Z405MF.SPC
[Status 23:04:31 INFO] data for Z405 transferred to science data processing
[Tidy 23:04:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:04:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:04:31 INFO] resetting WatchDogTimer
[Status 23:04:32 INFO] Starting Set [AERI set: name A406, 6 scans, 120 angle, D28300 command]
[Ingest 23:04:32 INFO] Sending XML status message
[Status 23:04:32 INFO] Mirror angle: 120
[Mirror 23:04:32 INFO] rotating to position A
[Status 23:04:34 INFO] .SET file for ACQ96 ready
[Ingest 23:04:34 INFO] Starting acquisition
[Status 23:04:35 INFO] reading housekeeping
[Status 23:04:52 INFO] acquire complete
[Status 23:04:54 INFO] writing housekeeping
[Sequencer 23:04:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:04:54 INFO] incremented A scene to 406 completed views
[Sequencer 23:04:54 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:04:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:04:54 INFO] incremented to [AERI set: name H406, 6 scans, 60 angle, D22500 command] set
[sigmove 23:04:54 INFO] A406.SIG(18)
[sigmove 23:04:54 DEBUG] transformed A406Ma.SPC -> A406MA.SPC
[sigmove 23:04:54 DEBUG] transformed A406Mb.SPC -> A406MB.SPC
[sigmove 23:04:54 DEBUG] transformed A406Mc.SPC -> A406MC.SPC
[sigmove 23:04:54 DEBUG] transformed A406Md.SPC -> A406MD.SPC
[sigmove 23:04:54 DEBUG] transformed A406Me.SPC -> A406ME.SPC
[sigmove 23:04:54 DEBUG] transformed A406Mf.SPC -> A406MF.SPC
[Status 23:04:54 INFO] data for A406 transferred to science data processing
[Tidy 23:04:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:04:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:04:54 INFO] resetting WatchDogTimer
[Status 23:04:54 INFO] Starting Set [AERI set: name H406, 6 scans, 60 angle, D22500 command]
[Ingest 23:04:54 INFO] Sending XML status message
[Status 23:04:54 INFO] Mirror angle: 60
[Mirror 23:04:55 INFO] rotating to position H
[Status 23:04:56 INFO] .SET file for ACQ96 ready
[Ingest 23:04:56 INFO] Starting acquisition
[Status 23:04:57 INFO] reading housekeeping
[Status 23:05:15 INFO] acquire complete
[Status 23:05:16 INFO] writing housekeeping
[Sequencer 23:05:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:05:16 INFO] incremented H scene to 406 completed views
[Sequencer 23:05:16 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:05:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:05:16 INFO] incremented to [AERI set: name S406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:05:16 INFO] H406.SIG(18)
[sigmove 23:05:16 DEBUG] transformed H406Ma.SPC -> H406MA.SPC
[sigmove 23:05:16 DEBUG] transformed H406Mb.SPC -> H406MB.SPC
[sigmove 23:05:16 DEBUG] transformed H406Mc.SPC -> H406MC.SPC
[sigmove 23:05:16 DEBUG] transformed H406Md.SPC -> H406MD.SPC
[sigmove 23:05:16 DEBUG] transformed H406Me.SPC -> H406ME.SPC
[sigmove 23:05:16 DEBUG] transformed H406Mf.SPC -> H406MF.SPC
[Status 23:05:16 INFO] data for H406 transferred to science data processing
[Tidy 23:05:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:05:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:05:16 INFO] resetting WatchDogTimer
[Status 23:05:17 INFO] Starting Set [AERI set: name S406, 6 scans, 0 angle, D16300 command]
[Ingest 23:05:17 INFO] Sending XML status message
[Status 23:05:17 INFO] Mirror angle: 0
[Mirror 23:05:17 INFO] rotating to position S
[Status 23:05:18 INFO] .SET file for ACQ96 ready
[Ingest 23:05:19 INFO] Starting acquisition
[Status 23:05:19 INFO] reading housekeeping
[Status 23:05:37 INFO] acquire complete
[Status 23:05:39 INFO] writing housekeeping
[Sequencer 23:05:39 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:05:39 INFO] incremented S scene to 406 completed views
[Sequencer 23:05:39 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:05:39 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:05:39 INFO] incremented to [AERI set: name T406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:05:39 INFO] S406.SIG(18)
[sigmove 23:05:39 DEBUG] transformed S406Ma.SPC -> S406MA.SPC
[sigmove 23:05:39 DEBUG] transformed S406Mb.SPC -> S406MB.SPC
[sigmove 23:05:39 DEBUG] transformed S406Mc.SPC -> S406MC.SPC
[sigmove 23:05:39 DEBUG] transformed S406Md.SPC -> S406MD.SPC
[sigmove 23:05:39 DEBUG] transformed S406Me.SPC -> S406ME.SPC
[sigmove 23:05:39 DEBUG] transformed S406Mf.SPC -> S406MF.SPC
[Status 23:05:39 INFO] data for S406 transferred to science data processing
[Tidy 23:05:39 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:05:39 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:05:39 INFO] resetting WatchDogTimer
[Status 23:05:39 INFO] Starting Set [AERI set: name T406, 6 scans, 0 angle, D16300 command]
[Ingest 23:05:39 INFO] Sending XML status message
[Status 23:05:39 INFO] Mirror angle: 0
[Mirror 23:05:40 INFO] rotating to position T
[Status 23:05:40 INFO] .SET file for ACQ96 ready
[Ingest 23:05:41 INFO] Starting acquisition
[Status 23:05:41 INFO] reading housekeeping
[Status 23:05:59 INFO] acquire complete
[Status 23:06:00 INFO] writing housekeeping
[Sequencer 23:06:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:06:00 INFO] incremented T scene to 406 completed views
[Sequencer 23:06:00 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:06:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:06:00 INFO] incremented to [AERI set: name U406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:06:00 INFO] T406.SIG(18)
[sigmove 23:06:00 DEBUG] transformed T406Ma.SPC -> T406MA.SPC
[sigmove 23:06:00 DEBUG] transformed T406Mb.SPC -> T406MB.SPC
[sigmove 23:06:00 DEBUG] transformed T406Mc.SPC -> T406MC.SPC
[sigmove 23:06:00 DEBUG] transformed T406Md.SPC -> T406MD.SPC
[sigmove 23:06:00 DEBUG] transformed T406Me.SPC -> T406ME.SPC
[sigmove 23:06:00 DEBUG] transformed T406Mf.SPC -> T406MF.SPC
[Status 23:06:00 INFO] data for T406 transferred to science data processing
[Tidy 23:06:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:06:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:06:00 INFO] resetting WatchDogTimer
[Status 23:06:00 INFO] Starting Set [AERI set: name U406, 6 scans, 0 angle, D16300 command]
[Ingest 23:06:00 INFO] Sending XML status message
[Status 23:06:00 INFO] Mirror angle: 0
[Mirror 23:06:01 INFO] rotating to position U
[Status 23:06:01 INFO] .SET file for ACQ96 ready
[Ingest 23:06:02 INFO] Starting acquisition
[Status 23:06:03 INFO] reading housekeeping
[Status 23:06:20 INFO] acquire complete
[Status 23:06:21 INFO] writing housekeeping
[Sequencer 23:06:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:06:21 INFO] incremented U scene to 406 completed views
[Sequencer 23:06:21 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:06:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:06:21 INFO] incremented to [AERI set: name V406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:06:21 INFO] U406.SIG(18)
[sigmove 23:06:21 DEBUG] transformed U406Ma.SPC -> U406MA.SPC
[sigmove 23:06:21 DEBUG] transformed U406Mb.SPC -> U406MB.SPC
[sigmove 23:06:21 DEBUG] transformed U406Mc.SPC -> U406MC.SPC
[sigmove 23:06:21 DEBUG] transformed U406Md.SPC -> U406MD.SPC
[sigmove 23:06:21 DEBUG] transformed U406Me.SPC -> U406ME.SPC
[sigmove 23:06:21 DEBUG] transformed U406Mf.SPC -> U406MF.SPC
[Status 23:06:21 INFO] data for U406 transferred to science data processing
[Tidy 23:06:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:06:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:06:21 INFO] resetting WatchDogTimer
[Status 23:06:22 INFO] Starting Set [AERI set: name V406, 6 scans, 0 angle, D16300 command]
[Ingest 23:06:22 INFO] Sending XML status message
[Status 23:06:22 INFO] Mirror angle: 0
[Mirror 23:06:22 INFO] rotating to position V
[Status 23:06:23 INFO] .SET file for ACQ96 ready
[Ingest 23:06:23 INFO] Starting acquisition
[Status 23:06:24 INFO] reading housekeeping
[Status 23:06:41 INFO] acquire complete
[Status 23:06:42 INFO] writing housekeeping
[Sequencer 23:06:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:06:42 INFO] incremented V scene to 406 completed views
[Sequencer 23:06:42 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:06:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:06:42 INFO] incremented to [AERI set: name W406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:06:42 INFO] V406.SIG(18)
[sigmove 23:06:42 DEBUG] transformed V406Ma.SPC -> V406MA.SPC
[sigmove 23:06:42 DEBUG] transformed V406Mb.SPC -> V406MB.SPC
[sigmove 23:06:42 DEBUG] transformed V406Mc.SPC -> V406MC.SPC
[sigmove 23:06:42 DEBUG] transformed V406Md.SPC -> V406MD.SPC
[sigmove 23:06:42 DEBUG] transformed V406Me.SPC -> V406ME.SPC
[sigmove 23:06:42 DEBUG] transformed V406Mf.SPC -> V406MF.SPC
[Status 23:06:42 INFO] data for V406 transferred to science data processing
[Tidy 23:06:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:06:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:06:42 INFO] resetting WatchDogTimer
[Status 23:06:43 INFO] Starting Set [AERI set: name W406, 6 scans, 0 angle, D16300 command]
[Ingest 23:06:43 INFO] Sending XML status message
[Status 23:06:43 INFO] Mirror angle: 0
[Mirror 23:06:43 INFO] rotating to position W
[Status 23:06:44 INFO] .SET file for ACQ96 ready
[Ingest 23:06:45 INFO] Starting acquisition
[Status 23:06:45 INFO] reading housekeeping
[Status 23:07:02 INFO] acquire complete
[Status 23:07:04 INFO] writing housekeeping
[Sequencer 23:07:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:07:04 INFO] incremented W scene to 406 completed views
[Sequencer 23:07:04 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:07:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:07:04 INFO] incremented to [AERI set: name X406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:07:04 INFO] W406.SIG(18)
[sigmove 23:07:04 DEBUG] transformed W406Ma.SPC -> W406MA.SPC
[sigmove 23:07:04 DEBUG] transformed W406Mb.SPC -> W406MB.SPC
[sigmove 23:07:04 DEBUG] transformed W406Mc.SPC -> W406MC.SPC
[sigmove 23:07:04 DEBUG] transformed W406Md.SPC -> W406MD.SPC
[sigmove 23:07:04 DEBUG] transformed W406Me.SPC -> W406ME.SPC
[sigmove 23:07:04 DEBUG] transformed W406Mf.SPC -> W406MF.SPC
[Status 23:07:04 INFO] data for W406 transferred to science data processing
[Tidy 23:07:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:07:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:07:04 INFO] resetting WatchDogTimer
[Status 23:07:04 INFO] Starting Set [AERI set: name X406, 6 scans, 0 angle, D16300 command]
[Ingest 23:07:04 INFO] Sending XML status message
[Status 23:07:04 INFO] Mirror angle: 0
[Mirror 23:07:05 INFO] rotating to position X
[Status 23:07:05 INFO] .SET file for ACQ96 ready
[Ingest 23:07:06 INFO] Starting acquisition
[Status 23:07:06 INFO] reading housekeeping
[Status 23:07:24 INFO] acquire complete
[Status 23:07:25 INFO] writing housekeeping
[Sequencer 23:07:25 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:07:25 INFO] incremented X scene to 406 completed views
[Sequencer 23:07:25 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:07:25 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:07:25 INFO] incremented to [AERI set: name Y406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:07:25 INFO] X406.SIG(18)
[sigmove 23:07:25 DEBUG] transformed X406Ma.SPC -> X406MA.SPC
[sigmove 23:07:25 DEBUG] transformed X406Mb.SPC -> X406MB.SPC
[sigmove 23:07:25 DEBUG] transformed X406Mc.SPC -> X406MC.SPC
[sigmove 23:07:25 DEBUG] transformed X406Md.SPC -> X406MD.SPC
[sigmove 23:07:25 DEBUG] transformed X406Me.SPC -> X406ME.SPC
[sigmove 23:07:25 DEBUG] transformed X406Mf.SPC -> X406MF.SPC
[Status 23:07:25 INFO] data for X406 transferred to science data processing
[Tidy 23:07:25 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:07:25 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:07:25 INFO] resetting WatchDogTimer
[Status 23:07:26 INFO] Starting Set [AERI set: name Y406, 6 scans, 0 angle, D16300 command]
[Ingest 23:07:26 INFO] Sending XML status message
[Status 23:07:26 INFO] Mirror angle: 0
[Mirror 23:07:26 INFO] rotating to position Y
[Status 23:07:27 INFO] .SET file for ACQ96 ready
[Ingest 23:07:27 INFO] Starting acquisition
[Status 23:07:28 INFO] reading housekeeping
[Status 23:07:45 INFO] acquire complete
[Status 23:07:46 INFO] writing housekeeping
[Sequencer 23:07:46 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:07:46 INFO] incremented Y scene to 406 completed views
[Sequencer 23:07:46 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:07:46 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:07:46 INFO] incremented to [AERI set: name Z406, 6 scans, 0 angle, D16300 command] set
[sigmove 23:07:46 INFO] Y406.SIG(18)
[sigmove 23:07:46 DEBUG] transformed Y406Ma.SPC -> Y406MA.SPC
[sigmove 23:07:46 DEBUG] transformed Y406Mb.SPC -> Y406MB.SPC
[sigmove 23:07:46 DEBUG] transformed Y406Mc.SPC -> Y406MC.SPC
[sigmove 23:07:46 DEBUG] transformed Y406Md.SPC -> Y406MD.SPC
[sigmove 23:07:46 DEBUG] transformed Y406Me.SPC -> Y406ME.SPC
[sigmove 23:07:46 DEBUG] transformed Y406Mf.SPC -> Y406MF.SPC
[Status 23:07:46 INFO] data for Y406 transferred to science data processing
[Tidy 23:07:46 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:07:46 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:07:46 INFO] resetting WatchDogTimer
[Status 23:07:47 INFO] Starting Set [AERI set: name Z406, 6 scans, 0 angle, D16300 command]
[Ingest 23:07:47 INFO] Sending XML status message
[Status 23:07:47 INFO] Mirror angle: 0
[Mirror 23:07:47 INFO] rotating to position Z
[Status 23:07:48 INFO] .SET file for ACQ96 ready
[Ingest 23:07:48 INFO] Starting acquisition
[Status 23:07:49 INFO] reading housekeeping
[Status 23:08:06 INFO] acquire complete
[Status 23:08:08 INFO] writing housekeeping
[Sequencer 23:08:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:08:08 INFO] incremented Z scene to 406 completed views
[Sequencer 23:08:08 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:08:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:08:08 INFO] incremented to [AERI set: name H407, 6 scans, 60 angle, D22500 command] set
[sigmove 23:08:08 INFO] Z406.SIG(18)
[sigmove 23:08:08 DEBUG] transformed Z406Ma.SPC -> Z406MA.SPC
[sigmove 23:08:08 DEBUG] transformed Z406Mb.SPC -> Z406MB.SPC
[sigmove 23:08:08 DEBUG] transformed Z406Mc.SPC -> Z406MC.SPC
[sigmove 23:08:08 DEBUG] transformed Z406Md.SPC -> Z406MD.SPC
[sigmove 23:08:08 DEBUG] transformed Z406Me.SPC -> Z406ME.SPC
[sigmove 23:08:08 DEBUG] transformed Z406Mf.SPC -> Z406MF.SPC
[Status 23:08:08 INFO] data for Z406 transferred to science data processing
[Tidy 23:08:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:08:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:08:08 INFO] resetting WatchDogTimer
[Status 23:08:08 INFO] Starting Set [AERI set: name H407, 6 scans, 60 angle, D22500 command]
[Ingest 23:08:08 INFO] Sending XML status message
[Status 23:08:08 INFO] Mirror angle: 60
[Mirror 23:08:09 INFO] rotating to position H
[Status 23:08:10 INFO] .SET file for ACQ96 ready
[Ingest 23:08:10 INFO] Starting acquisition
[Status 23:08:11 INFO] reading housekeeping
[Status 23:08:29 INFO] acquire complete
[Status 23:08:30 INFO] writing housekeeping
[Sequencer 23:08:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:08:30 INFO] incremented H scene to 407 completed views
[Sequencer 23:08:30 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:08:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:08:30 INFO] incremented to [AERI set: name A407, 6 scans, 120 angle, D28300 command] set
[sigmove 23:08:30 INFO] H407.SIG(18)
[sigmove 23:08:30 DEBUG] transformed H407Ma.SPC -> H407MA.SPC
[sigmove 23:08:30 DEBUG] transformed H407Mb.SPC -> H407MB.SPC
[sigmove 23:08:30 DEBUG] transformed H407Mc.SPC -> H407MC.SPC
[sigmove 23:08:30 DEBUG] transformed H407Md.SPC -> H407MD.SPC
[sigmove 23:08:30 DEBUG] transformed H407Me.SPC -> H407ME.SPC
[sigmove 23:08:30 DEBUG] transformed H407Mf.SPC -> H407MF.SPC
[Status 23:08:30 INFO] data for H407 transferred to science data processing
[Tidy 23:08:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:08:30 INFO] A405.FIN(19),H405.FIN(19),S405.FIN(19),T405.FIN(19),U405.FIN(19),V405.FIN(19),W405.FIN(19),X405.FIN(19),Y405.FIN(19),Z405.FIN(19),A406.FIN(19),H406.FIN(19),S406.FIN(19),T406.FIN(19),U406.FIN(19),V406.FIN(19),W406.FIN(19),X406.FIN(19),Y406.FIN(19),Z406.FIN(19)
[sigmove 23:08:30 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:08:30 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:08:37 DEBUG] done zipping
[WatchDog 23:08:38 INFO] resetting WatchDogTimer
[Status 23:08:38 INFO] Starting Set [AERI set: name A407, 6 scans, 120 angle, D28300 command]
[Ingest 23:08:38 INFO] Sending XML status message
[Status 23:08:38 INFO] Mirror angle: 120
[Mirror 23:08:39 INFO] rotating to position A
[Status 23:08:40 INFO] .SET file for ACQ96 ready
[Ingest 23:08:40 INFO] Starting acquisition
[Status 23:08:41 INFO] reading housekeeping
[Status 23:08:59 INFO] acquire complete
[Status 23:09:00 INFO] writing housekeeping
[Sequencer 23:09:00 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:09:00 INFO] incremented A scene to 407 completed views
[Sequencer 23:09:00 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:09:00 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:09:00 INFO] incremented to [AERI set: name S407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:09:00 INFO] A407.SIG(18)
[sigmove 23:09:00 DEBUG] transformed A407Ma.SPC -> A407MA.SPC
[sigmove 23:09:00 DEBUG] transformed A407Mb.SPC -> A407MB.SPC
[sigmove 23:09:00 DEBUG] transformed A407Mc.SPC -> A407MC.SPC
[sigmove 23:09:00 DEBUG] transformed A407Md.SPC -> A407MD.SPC
[sigmove 23:09:00 DEBUG] transformed A407Me.SPC -> A407ME.SPC
[sigmove 23:09:00 DEBUG] transformed A407Mf.SPC -> A407MF.SPC
[Status 23:09:00 INFO] data for A407 transferred to science data processing
[Tidy 23:09:00 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:09:00 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:09:00 INFO] resetting WatchDogTimer
[Status 23:09:01 INFO] Starting Set [AERI set: name S407, 6 scans, 0 angle, D16300 command]
[Ingest 23:09:01 INFO] Sending XML status message
[Status 23:09:01 INFO] Mirror angle: 0
[Mirror 23:09:01 INFO] rotating to position S
[Status 23:09:03 INFO] .SET file for ACQ96 ready
[Ingest 23:09:03 INFO] Starting acquisition
[Status 23:09:04 INFO] reading housekeeping
[Status 23:09:22 INFO] acquire complete
[Status 23:09:23 INFO] writing housekeeping
[Sequencer 23:09:23 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:09:23 INFO] incremented S scene to 407 completed views
[Sequencer 23:09:23 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:09:23 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:09:23 INFO] incremented to [AERI set: name T407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:09:23 INFO] S407.SIG(18)
[sigmove 23:09:23 DEBUG] transformed S407Ma.SPC -> S407MA.SPC
[sigmove 23:09:23 DEBUG] transformed S407Mb.SPC -> S407MB.SPC
[sigmove 23:09:23 DEBUG] transformed S407Mc.SPC -> S407MC.SPC
[sigmove 23:09:23 DEBUG] transformed S407Md.SPC -> S407MD.SPC
[sigmove 23:09:23 DEBUG] transformed S407Me.SPC -> S407ME.SPC
[sigmove 23:09:23 DEBUG] transformed S407Mf.SPC -> S407MF.SPC
[Status 23:09:23 INFO] data for S407 transferred to science data processing
[Tidy 23:09:23 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:09:23 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:09:23 INFO] resetting WatchDogTimer
[Status 23:09:23 INFO] Starting Set [AERI set: name T407, 6 scans, 0 angle, D16300 command]
[Ingest 23:09:23 INFO] Sending XML status message
[Status 23:09:23 INFO] Mirror angle: 0
[Mirror 23:09:24 INFO] rotating to position T
[Status 23:09:24 INFO] .SET file for ACQ96 ready
[Ingest 23:09:25 INFO] Starting acquisition
[Status 23:09:26 INFO] reading housekeeping
[Status 23:09:43 INFO] acquire complete
[Status 23:09:44 INFO] writing housekeeping
[Sequencer 23:09:44 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:09:44 INFO] incremented T scene to 407 completed views
[Sequencer 23:09:44 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:09:44 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:09:44 INFO] incremented to [AERI set: name U407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:09:44 INFO] T407.SIG(18)
[sigmove 23:09:44 DEBUG] transformed T407Ma.SPC -> T407MA.SPC
[sigmove 23:09:44 DEBUG] transformed T407Mb.SPC -> T407MB.SPC
[sigmove 23:09:44 DEBUG] transformed T407Mc.SPC -> T407MC.SPC
[sigmove 23:09:44 DEBUG] transformed T407Md.SPC -> T407MD.SPC
[sigmove 23:09:44 DEBUG] transformed T407Me.SPC -> T407ME.SPC
[sigmove 23:09:44 DEBUG] transformed T407Mf.SPC -> T407MF.SPC
[Status 23:09:44 INFO] data for T407 transferred to science data processing
[Tidy 23:09:44 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:09:44 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:09:44 INFO] resetting WatchDogTimer
[Status 23:09:45 INFO] Starting Set [AERI set: name U407, 6 scans, 0 angle, D16300 command]
[Ingest 23:09:45 INFO] Sending XML status message
[Status 23:09:45 INFO] Mirror angle: 0
[Mirror 23:09:45 INFO] rotating to position U
[Status 23:09:46 INFO] .SET file for ACQ96 ready
[Ingest 23:09:46 INFO] Starting acquisition
[Status 23:09:47 INFO] reading housekeeping
[Status 23:10:04 INFO] acquire complete
[Status 23:10:05 INFO] writing housekeeping
[Sequencer 23:10:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:10:05 INFO] incremented U scene to 407 completed views
[Sequencer 23:10:05 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:10:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:10:05 INFO] incremented to [AERI set: name V407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:10:05 INFO] U407.SIG(18)
[sigmove 23:10:05 DEBUG] transformed U407Ma.SPC -> U407MA.SPC
[sigmove 23:10:05 DEBUG] transformed U407Mb.SPC -> U407MB.SPC
[sigmove 23:10:05 DEBUG] transformed U407Mc.SPC -> U407MC.SPC
[sigmove 23:10:05 DEBUG] transformed U407Md.SPC -> U407MD.SPC
[sigmove 23:10:05 DEBUG] transformed U407Me.SPC -> U407ME.SPC
[sigmove 23:10:05 DEBUG] transformed U407Mf.SPC -> U407MF.SPC
[Status 23:10:05 INFO] data for U407 transferred to science data processing
[Tidy 23:10:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:10:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:10:05 INFO] resetting WatchDogTimer
[Status 23:10:06 INFO] Starting Set [AERI set: name V407, 6 scans, 0 angle, D16300 command]
[Ingest 23:10:06 INFO] Sending XML status message
[Status 23:10:06 INFO] Mirror angle: 0
[Mirror 23:10:06 INFO] rotating to position V
[Status 23:10:07 INFO] .SET file for ACQ96 ready
[Ingest 23:10:08 INFO] Starting acquisition
[Status 23:10:08 INFO] reading housekeeping
[Status 23:10:25 INFO] acquire complete
[Status 23:10:27 INFO] writing housekeeping
[Sequencer 23:10:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:10:27 INFO] incremented V scene to 407 completed views
[Sequencer 23:10:27 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:10:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:10:27 INFO] incremented to [AERI set: name W407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:10:27 INFO] V407.SIG(18)
[sigmove 23:10:27 DEBUG] transformed V407Ma.SPC -> V407MA.SPC
[sigmove 23:10:27 DEBUG] transformed V407Mb.SPC -> V407MB.SPC
[sigmove 23:10:27 DEBUG] transformed V407Mc.SPC -> V407MC.SPC
[sigmove 23:10:27 DEBUG] transformed V407Md.SPC -> V407MD.SPC
[sigmove 23:10:27 DEBUG] transformed V407Me.SPC -> V407ME.SPC
[sigmove 23:10:27 DEBUG] transformed V407Mf.SPC -> V407MF.SPC
[Status 23:10:27 INFO] data for V407 transferred to science data processing
[Tidy 23:10:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:10:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:10:27 INFO] resetting WatchDogTimer
[Status 23:10:27 INFO] Starting Set [AERI set: name W407, 6 scans, 0 angle, D16300 command]
[Ingest 23:10:27 INFO] Sending XML status message
[Status 23:10:27 INFO] Mirror angle: 0
[Mirror 23:10:28 INFO] rotating to position W
[Status 23:10:28 INFO] .SET file for ACQ96 ready
[Ingest 23:10:29 INFO] Starting acquisition
[Status 23:10:29 INFO] reading housekeeping
[Status 23:10:47 INFO] acquire complete
[Status 23:10:48 INFO] writing housekeeping
[Sequencer 23:10:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:10:48 INFO] incremented W scene to 407 completed views
[Sequencer 23:10:48 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:10:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:10:48 INFO] incremented to [AERI set: name X407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:10:48 INFO] W407.SIG(18)
[sigmove 23:10:48 DEBUG] transformed W407Ma.SPC -> W407MA.SPC
[sigmove 23:10:48 DEBUG] transformed W407Mb.SPC -> W407MB.SPC
[sigmove 23:10:48 DEBUG] transformed W407Mc.SPC -> W407MC.SPC
[sigmove 23:10:48 DEBUG] transformed W407Md.SPC -> W407MD.SPC
[sigmove 23:10:48 DEBUG] transformed W407Me.SPC -> W407ME.SPC
[sigmove 23:10:48 DEBUG] transformed W407Mf.SPC -> W407MF.SPC
[Status 23:10:48 INFO] data for W407 transferred to science data processing
[Tidy 23:10:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:10:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:10:48 INFO] resetting WatchDogTimer
[Status 23:10:49 INFO] Starting Set [AERI set: name X407, 6 scans, 0 angle, D16300 command]
[Ingest 23:10:49 INFO] Sending XML status message
[Status 23:10:49 INFO] Mirror angle: 0
[Mirror 23:10:49 INFO] rotating to position X
[Status 23:10:50 INFO] .SET file for ACQ96 ready
[Ingest 23:10:50 INFO] Starting acquisition
[Status 23:10:51 INFO] reading housekeeping
[Status 23:11:08 INFO] acquire complete
[Status 23:11:09 INFO] writing housekeeping
[Sequencer 23:11:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:11:09 INFO] incremented X scene to 407 completed views
[Sequencer 23:11:09 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:11:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:11:09 INFO] incremented to [AERI set: name Y407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:11:09 INFO] X407.SIG(18)
[sigmove 23:11:09 DEBUG] transformed X407Ma.SPC -> X407MA.SPC
[sigmove 23:11:09 DEBUG] transformed X407Mb.SPC -> X407MB.SPC
[sigmove 23:11:09 DEBUG] transformed X407Mc.SPC -> X407MC.SPC
[sigmove 23:11:09 DEBUG] transformed X407Md.SPC -> X407MD.SPC
[sigmove 23:11:09 DEBUG] transformed X407Me.SPC -> X407ME.SPC
[sigmove 23:11:09 DEBUG] transformed X407Mf.SPC -> X407MF.SPC
[Status 23:11:09 INFO] data for X407 transferred to science data processing
[Tidy 23:11:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:11:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:11:09 INFO] resetting WatchDogTimer
[Status 23:11:10 INFO] Starting Set [AERI set: name Y407, 6 scans, 0 angle, D16300 command]
[Ingest 23:11:10 INFO] Sending XML status message
[Status 23:11:10 INFO] Mirror angle: 0
[Mirror 23:11:10 INFO] rotating to position Y
[Status 23:11:11 INFO] .SET file for ACQ96 ready
[Ingest 23:11:11 INFO] Starting acquisition
[Status 23:11:12 INFO] reading housekeeping
[Status 23:11:29 INFO] acquire complete
[Status 23:11:31 INFO] writing housekeeping
[Sequencer 23:11:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:11:31 INFO] incremented Y scene to 407 completed views
[Sequencer 23:11:31 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:11:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:11:31 INFO] incremented to [AERI set: name Z407, 6 scans, 0 angle, D16300 command] set
[sigmove 23:11:31 INFO] Y407.SIG(18)
[sigmove 23:11:31 DEBUG] transformed Y407Ma.SPC -> Y407MA.SPC
[sigmove 23:11:31 DEBUG] transformed Y407Mb.SPC -> Y407MB.SPC
[sigmove 23:11:31 DEBUG] transformed Y407Mc.SPC -> Y407MC.SPC
[sigmove 23:11:31 DEBUG] transformed Y407Md.SPC -> Y407MD.SPC
[sigmove 23:11:31 DEBUG] transformed Y407Me.SPC -> Y407ME.SPC
[sigmove 23:11:31 DEBUG] transformed Y407Mf.SPC -> Y407MF.SPC
[Status 23:11:31 INFO] data for Y407 transferred to science data processing
[Tidy 23:11:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:11:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:11:31 INFO] resetting WatchDogTimer
[Status 23:11:31 INFO] Starting Set [AERI set: name Z407, 6 scans, 0 angle, D16300 command]
[Ingest 23:11:31 INFO] Sending XML status message
[Status 23:11:31 INFO] Mirror angle: 0
[Mirror 23:11:32 INFO] rotating to position Z
[Status 23:11:32 INFO] .SET file for ACQ96 ready
[Ingest 23:11:33 INFO] Starting acquisition
[Status 23:11:33 INFO] reading housekeeping
[Status 23:11:51 INFO] acquire complete
[Status 23:11:52 INFO] writing housekeeping
[Sequencer 23:11:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:11:52 INFO] incremented Z scene to 407 completed views
[Sequencer 23:11:52 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:11:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:11:52 INFO] incremented to [AERI set: name A408, 6 scans, 120 angle, D28300 command] set
[sigmove 23:11:52 INFO] Z407.SIG(18)
[sigmove 23:11:52 DEBUG] transformed Z407Ma.SPC -> Z407MA.SPC
[sigmove 23:11:52 DEBUG] transformed Z407Mb.SPC -> Z407MB.SPC
[sigmove 23:11:52 DEBUG] transformed Z407Mc.SPC -> Z407MC.SPC
[sigmove 23:11:52 DEBUG] transformed Z407Md.SPC -> Z407MD.SPC
[sigmove 23:11:52 DEBUG] transformed Z407Me.SPC -> Z407ME.SPC
[sigmove 23:11:52 DEBUG] transformed Z407Mf.SPC -> Z407MF.SPC
[Status 23:11:52 INFO] data for Z407 transferred to science data processing
[Tidy 23:11:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:11:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:11:52 INFO] resetting WatchDogTimer
[Status 23:11:52 INFO] Starting Set [AERI set: name A408, 6 scans, 120 angle, D28300 command]
[Ingest 23:11:52 INFO] Sending XML status message
[Status 23:11:52 INFO] Mirror angle: 120
[Mirror 23:11:53 INFO] rotating to position A
[Status 23:11:55 INFO] .SET file for ACQ96 ready
[Ingest 23:11:55 INFO] Starting acquisition
[Status 23:11:56 INFO] reading housekeeping
[Status 23:12:13 INFO] acquire complete
[Status 23:12:14 INFO] writing housekeeping
[Sequencer 23:12:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:12:14 INFO] incremented A scene to 408 completed views
[Sequencer 23:12:14 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:12:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:12:14 INFO] incremented to [AERI set: name H408, 6 scans, 60 angle, D22500 command] set
[sigmove 23:12:14 INFO] A408.SIG(18)
[sigmove 23:12:14 DEBUG] transformed A408Ma.SPC -> A408MA.SPC
[sigmove 23:12:14 DEBUG] transformed A408Mb.SPC -> A408MB.SPC
[sigmove 23:12:14 DEBUG] transformed A408Mc.SPC -> A408MC.SPC
[sigmove 23:12:14 DEBUG] transformed A408Md.SPC -> A408MD.SPC
[sigmove 23:12:14 DEBUG] transformed A408Me.SPC -> A408ME.SPC
[sigmove 23:12:14 DEBUG] transformed A408Mf.SPC -> A408MF.SPC
[Status 23:12:14 INFO] data for A408 transferred to science data processing
[Tidy 23:12:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:12:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:12:14 INFO] resetting WatchDogTimer
[Status 23:12:15 INFO] Starting Set [AERI set: name H408, 6 scans, 60 angle, D22500 command]
[Ingest 23:12:15 INFO] Sending XML status message
[Status 23:12:15 INFO] Mirror angle: 60
[Mirror 23:12:15 INFO] rotating to position H
[Status 23:12:17 INFO] .SET file for ACQ96 ready
[Ingest 23:12:17 INFO] Starting acquisition
[Status 23:12:18 INFO] reading housekeeping
[Status 23:12:36 INFO] acquire complete
[Status 23:12:37 INFO] writing housekeeping
[Sequencer 23:12:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:12:37 INFO] incremented H scene to 408 completed views
[Sequencer 23:12:37 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:12:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:12:37 INFO] incremented to [AERI set: name S408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:12:37 INFO] H408.SIG(18)
[sigmove 23:12:37 DEBUG] transformed H408Ma.SPC -> H408MA.SPC
[sigmove 23:12:37 DEBUG] transformed H408Mb.SPC -> H408MB.SPC
[sigmove 23:12:37 DEBUG] transformed H408Mc.SPC -> H408MC.SPC
[sigmove 23:12:37 DEBUG] transformed H408Md.SPC -> H408MD.SPC
[sigmove 23:12:37 DEBUG] transformed H408Me.SPC -> H408ME.SPC
[sigmove 23:12:37 DEBUG] transformed H408Mf.SPC -> H408MF.SPC
[Status 23:12:37 INFO] data for H408 transferred to science data processing
[Tidy 23:12:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:12:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:12:37 INFO] resetting WatchDogTimer
[Status 23:12:37 INFO] Starting Set [AERI set: name S408, 6 scans, 0 angle, D16300 command]
[Ingest 23:12:37 INFO] Sending XML status message
[Status 23:12:37 INFO] Mirror angle: 0
[Mirror 23:12:38 INFO] rotating to position S
[Status 23:12:39 INFO] .SET file for ACQ96 ready
[Ingest 23:12:39 INFO] Starting acquisition
[Status 23:12:40 INFO] reading housekeeping
[Status 23:12:58 INFO] acquire complete
[Status 23:12:59 INFO] writing housekeeping
[Sequencer 23:12:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:12:59 INFO] incremented S scene to 408 completed views
[Sequencer 23:12:59 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:12:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:12:59 INFO] incremented to [AERI set: name T408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:12:59 INFO] S408.SIG(18)
[sigmove 23:12:59 DEBUG] transformed S408Ma.SPC -> S408MA.SPC
[sigmove 23:12:59 DEBUG] transformed S408Mb.SPC -> S408MB.SPC
[sigmove 23:12:59 DEBUG] transformed S408Mc.SPC -> S408MC.SPC
[sigmove 23:12:59 DEBUG] transformed S408Md.SPC -> S408MD.SPC
[sigmove 23:12:59 DEBUG] transformed S408Me.SPC -> S408ME.SPC
[sigmove 23:12:59 DEBUG] transformed S408Mf.SPC -> S408MF.SPC
[Status 23:12:59 INFO] data for S408 transferred to science data processing
[Tidy 23:12:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:12:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:12:59 INFO] resetting WatchDogTimer
[Status 23:13:00 INFO] Starting Set [AERI set: name T408, 6 scans, 0 angle, D16300 command]
[Ingest 23:13:00 INFO] Sending XML status message
[Status 23:13:00 INFO] Mirror angle: 0
[Mirror 23:13:00 INFO] rotating to position T
[Status 23:13:01 INFO] .SET file for ACQ96 ready
[Ingest 23:13:01 INFO] Starting acquisition
[Status 23:13:02 INFO] reading housekeeping
[Status 23:13:19 INFO] acquire complete
[Status 23:13:21 INFO] writing housekeeping
[Sequencer 23:13:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:13:21 INFO] incremented T scene to 408 completed views
[Sequencer 23:13:21 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:13:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:13:21 INFO] incremented to [AERI set: name U408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:13:21 INFO] T408.SIG(18)
[sigmove 23:13:21 DEBUG] transformed T408Ma.SPC -> T408MA.SPC
[sigmove 23:13:21 DEBUG] transformed T408Mb.SPC -> T408MB.SPC
[sigmove 23:13:21 DEBUG] transformed T408Mc.SPC -> T408MC.SPC
[sigmove 23:13:21 DEBUG] transformed T408Md.SPC -> T408MD.SPC
[sigmove 23:13:21 DEBUG] transformed T408Me.SPC -> T408ME.SPC
[sigmove 23:13:21 DEBUG] transformed T408Mf.SPC -> T408MF.SPC
[Status 23:13:21 INFO] data for T408 transferred to science data processing
[Tidy 23:13:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:13:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:13:21 INFO] resetting WatchDogTimer
[Status 23:13:21 INFO] Starting Set [AERI set: name U408, 6 scans, 0 angle, D16300 command]
[Ingest 23:13:21 INFO] Sending XML status message
[Status 23:13:21 INFO] Mirror angle: 0
[Mirror 23:13:22 INFO] rotating to position U
[Status 23:13:22 INFO] .SET file for ACQ96 ready
[Ingest 23:13:23 INFO] Starting acquisition
[Status 23:13:23 INFO] reading housekeeping
[Status 23:13:41 INFO] acquire complete
[Status 23:13:42 INFO] writing housekeeping
[Sequencer 23:13:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:13:42 INFO] incremented U scene to 408 completed views
[Sequencer 23:13:42 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:13:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:13:42 INFO] incremented to [AERI set: name V408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:13:42 INFO] U408.SIG(18)
[sigmove 23:13:42 DEBUG] transformed U408Ma.SPC -> U408MA.SPC
[sigmove 23:13:42 DEBUG] transformed U408Mb.SPC -> U408MB.SPC
[sigmove 23:13:42 DEBUG] transformed U408Mc.SPC -> U408MC.SPC
[sigmove 23:13:42 DEBUG] transformed U408Md.SPC -> U408MD.SPC
[sigmove 23:13:42 DEBUG] transformed U408Me.SPC -> U408ME.SPC
[sigmove 23:13:42 DEBUG] transformed U408Mf.SPC -> U408MF.SPC
[Status 23:13:42 INFO] data for U408 transferred to science data processing
[Tidy 23:13:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:13:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:13:42 INFO] resetting WatchDogTimer
[Status 23:13:42 INFO] Starting Set [AERI set: name V408, 6 scans, 0 angle, D16300 command]
[Ingest 23:13:42 INFO] Sending XML status message
[Status 23:13:42 INFO] Mirror angle: 0
[Mirror 23:13:43 INFO] rotating to position V
[Status 23:13:43 INFO] .SET file for ACQ96 ready
[Ingest 23:13:44 INFO] Starting acquisition
[Status 23:13:45 INFO] reading housekeeping
[Status 23:14:02 INFO] acquire complete
[Status 23:14:03 INFO] writing housekeeping
[Sequencer 23:14:03 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:14:03 INFO] incremented V scene to 408 completed views
[Sequencer 23:14:03 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:14:03 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:14:03 INFO] incremented to [AERI set: name W408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:14:03 INFO] V408.SIG(18)
[sigmove 23:14:03 DEBUG] transformed V408Ma.SPC -> V408MA.SPC
[sigmove 23:14:03 DEBUG] transformed V408Mb.SPC -> V408MB.SPC
[sigmove 23:14:03 DEBUG] transformed V408Mc.SPC -> V408MC.SPC
[sigmove 23:14:03 DEBUG] transformed V408Md.SPC -> V408MD.SPC
[sigmove 23:14:03 DEBUG] transformed V408Me.SPC -> V408ME.SPC
[sigmove 23:14:03 DEBUG] transformed V408Mf.SPC -> V408MF.SPC
[Status 23:14:03 INFO] data for V408 transferred to science data processing
[Tidy 23:14:03 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:14:03 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:14:03 INFO] resetting WatchDogTimer
[Status 23:14:04 INFO] Starting Set [AERI set: name W408, 6 scans, 0 angle, D16300 command]
[Ingest 23:14:04 INFO] Sending XML status message
[Status 23:14:04 INFO] Mirror angle: 0
[Mirror 23:14:04 INFO] rotating to position W
[Status 23:14:05 INFO] .SET file for ACQ96 ready
[Ingest 23:14:05 INFO] Starting acquisition
[Status 23:14:06 INFO] reading housekeeping
[Status 23:14:23 INFO] acquire complete
[Status 23:14:26 INFO] writing housekeeping
[Sequencer 23:14:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:14:26 INFO] incremented W scene to 408 completed views
[Sequencer 23:14:26 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:14:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:14:26 INFO] incremented to [AERI set: name X408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:14:26 INFO] W408.SIG(18)
[sigmove 23:14:26 DEBUG] transformed W408Ma.SPC -> W408MA.SPC
[sigmove 23:14:26 DEBUG] transformed W408Mb.SPC -> W408MB.SPC
[sigmove 23:14:26 DEBUG] transformed W408Mc.SPC -> W408MC.SPC
[sigmove 23:14:26 DEBUG] transformed W408Md.SPC -> W408MD.SPC
[sigmove 23:14:26 DEBUG] transformed W408Me.SPC -> W408ME.SPC
[sigmove 23:14:26 DEBUG] transformed W408Mf.SPC -> W408MF.SPC
[Status 23:14:26 INFO] data for W408 transferred to science data processing
[Tidy 23:14:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:14:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:14:26 INFO] resetting WatchDogTimer
[Status 23:14:26 INFO] Starting Set [AERI set: name X408, 6 scans, 0 angle, D16300 command]
[Ingest 23:14:26 INFO] Sending XML status message
[Status 23:14:26 INFO] Mirror angle: 0
[Mirror 23:14:27 INFO] rotating to position X
[Status 23:14:27 INFO] .SET file for ACQ96 ready
[Ingest 23:14:28 INFO] Starting acquisition
[Status 23:14:28 INFO] reading housekeeping
[Status 23:14:46 INFO] acquire complete
[Status 23:14:47 INFO] writing housekeeping
[Sequencer 23:14:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:14:47 INFO] incremented X scene to 408 completed views
[Sequencer 23:14:47 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:14:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:14:47 INFO] incremented to [AERI set: name Y408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:14:47 INFO] X408.SIG(18)
[sigmove 23:14:47 DEBUG] transformed X408Ma.SPC -> X408MA.SPC
[sigmove 23:14:47 DEBUG] transformed X408Mb.SPC -> X408MB.SPC
[sigmove 23:14:47 DEBUG] transformed X408Mc.SPC -> X408MC.SPC
[sigmove 23:14:47 DEBUG] transformed X408Md.SPC -> X408MD.SPC
[sigmove 23:14:47 DEBUG] transformed X408Me.SPC -> X408ME.SPC
[sigmove 23:14:47 DEBUG] transformed X408Mf.SPC -> X408MF.SPC
[Status 23:14:47 INFO] data for X408 transferred to science data processing
[Tidy 23:14:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:14:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:14:47 INFO] resetting WatchDogTimer
[Status 23:14:47 INFO] Starting Set [AERI set: name Y408, 6 scans, 0 angle, D16300 command]
[Ingest 23:14:47 INFO] Sending XML status message
[Status 23:14:47 INFO] Mirror angle: 0
[Mirror 23:14:48 INFO] rotating to position Y
[Status 23:14:49 INFO] .SET file for ACQ96 ready
[Ingest 23:14:49 INFO] Starting acquisition
[Status 23:14:50 INFO] reading housekeeping
[Status 23:15:07 INFO] acquire complete
[Status 23:15:08 INFO] writing housekeeping
[Sequencer 23:15:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:15:08 INFO] incremented Y scene to 408 completed views
[Sequencer 23:15:08 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:15:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:15:08 INFO] incremented to [AERI set: name Z408, 6 scans, 0 angle, D16300 command] set
[sigmove 23:15:08 INFO] Y408.SIG(18)
[sigmove 23:15:08 DEBUG] transformed Y408Ma.SPC -> Y408MA.SPC
[sigmove 23:15:08 DEBUG] transformed Y408Mb.SPC -> Y408MB.SPC
[sigmove 23:15:08 DEBUG] transformed Y408Mc.SPC -> Y408MC.SPC
[sigmove 23:15:08 DEBUG] transformed Y408Md.SPC -> Y408MD.SPC
[sigmove 23:15:08 DEBUG] transformed Y408Me.SPC -> Y408ME.SPC
[sigmove 23:15:08 DEBUG] transformed Y408Mf.SPC -> Y408MF.SPC
[Status 23:15:08 INFO] data for Y408 transferred to science data processing
[Tidy 23:15:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:15:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:15:08 INFO] resetting WatchDogTimer
[Status 23:15:09 INFO] Starting Set [AERI set: name Z408, 6 scans, 0 angle, D16300 command]
[Ingest 23:15:09 INFO] Sending XML status message
[Status 23:15:09 INFO] Mirror angle: 0
[Mirror 23:15:09 INFO] rotating to position Z
[Status 23:15:10 INFO] .SET file for ACQ96 ready
[Ingest 23:15:10 INFO] Starting acquisition
[Status 23:15:11 INFO] reading housekeeping
[Status 23:15:28 INFO] acquire complete
[Status 23:15:30 INFO] writing housekeeping
[Sequencer 23:15:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:15:30 INFO] incremented Z scene to 408 completed views
[Sequencer 23:15:30 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:15:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:15:30 INFO] incremented to [AERI set: name H409, 6 scans, 60 angle, D22500 command] set
[sigmove 23:15:30 INFO] Z408.SIG(18)
[sigmove 23:15:30 DEBUG] transformed Z408Ma.SPC -> Z408MA.SPC
[sigmove 23:15:30 DEBUG] transformed Z408Mb.SPC -> Z408MB.SPC
[sigmove 23:15:30 DEBUG] transformed Z408Mc.SPC -> Z408MC.SPC
[sigmove 23:15:30 DEBUG] transformed Z408Md.SPC -> Z408MD.SPC
[sigmove 23:15:30 DEBUG] transformed Z408Me.SPC -> Z408ME.SPC
[sigmove 23:15:30 DEBUG] transformed Z408Mf.SPC -> Z408MF.SPC
[Status 23:15:30 INFO] data for Z408 transferred to science data processing
[Tidy 23:15:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:15:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:15:30 INFO] resetting WatchDogTimer
[Status 23:15:30 INFO] Starting Set [AERI set: name H409, 6 scans, 60 angle, D22500 command]
[Ingest 23:15:30 INFO] Sending XML status message
[Status 23:15:30 INFO] Mirror angle: 60
[Mirror 23:15:31 INFO] rotating to position H
[Status 23:15:32 INFO] .SET file for ACQ96 ready
[Ingest 23:15:32 INFO] Starting acquisition
[Status 23:15:33 INFO] reading housekeeping
[Status 23:15:51 INFO] acquire complete
[Status 23:15:52 INFO] writing housekeeping
[Sequencer 23:15:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:15:52 INFO] incremented H scene to 409 completed views
[Sequencer 23:15:52 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:15:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:15:52 INFO] incremented to [AERI set: name A409, 6 scans, 120 angle, D28300 command] set
[sigmove 23:15:52 INFO] H409.SIG(18)
[sigmove 23:15:52 DEBUG] transformed H409Ma.SPC -> H409MA.SPC
[sigmove 23:15:52 DEBUG] transformed H409Mb.SPC -> H409MB.SPC
[sigmove 23:15:52 DEBUG] transformed H409Mc.SPC -> H409MC.SPC
[sigmove 23:15:52 DEBUG] transformed H409Md.SPC -> H409MD.SPC
[sigmove 23:15:52 DEBUG] transformed H409Me.SPC -> H409ME.SPC
[sigmove 23:15:52 DEBUG] transformed H409Mf.SPC -> H409MF.SPC
[Status 23:15:52 INFO] data for H409 transferred to science data processing
[Tidy 23:15:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:15:52 INFO] A407.FIN(19),H407.FIN(19),S407.FIN(19),T407.FIN(19),U407.FIN(19),V407.FIN(19),W407.FIN(19),X407.FIN(19),Y407.FIN(19),Z407.FIN(19),A408.FIN(19),H408.FIN(19),S408.FIN(19),T408.FIN(19),U408.FIN(19),V408.FIN(19),W408.FIN(19),X408.FIN(19),Y408.FIN(19),Z408.FIN(19)
[sigmove 23:15:52 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:15:52 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:15:59 DEBUG] done zipping
[WatchDog 23:16:00 INFO] resetting WatchDogTimer
[Status 23:16:00 INFO] Starting Set [AERI set: name A409, 6 scans, 120 angle, D28300 command]
[Ingest 23:16:00 INFO] Sending XML status message
[Status 23:16:00 INFO] Mirror angle: 120
[Mirror 23:16:01 INFO] rotating to position A
[Status 23:16:02 INFO] .SET file for ACQ96 ready
[Ingest 23:16:02 INFO] Starting acquisition
[Status 23:16:03 INFO] reading housekeeping
[Status 23:16:21 INFO] acquire complete
[Status 23:16:22 INFO] writing housekeeping
[Sequencer 23:16:22 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:16:22 INFO] incremented A scene to 409 completed views
[Sequencer 23:16:22 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:16:22 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:16:22 INFO] incremented to [AERI set: name S409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:16:22 INFO] A409.SIG(18)
[sigmove 23:16:22 DEBUG] transformed A409Ma.SPC -> A409MA.SPC
[sigmove 23:16:22 DEBUG] transformed A409Mb.SPC -> A409MB.SPC
[sigmove 23:16:22 DEBUG] transformed A409Mc.SPC -> A409MC.SPC
[sigmove 23:16:22 DEBUG] transformed A409Md.SPC -> A409MD.SPC
[sigmove 23:16:22 DEBUG] transformed A409Me.SPC -> A409ME.SPC
[sigmove 23:16:22 DEBUG] transformed A409Mf.SPC -> A409MF.SPC
[Status 23:16:22 INFO] data for A409 transferred to science data processing
[Tidy 23:16:22 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:16:22 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:16:22 INFO] resetting WatchDogTimer
[Status 23:16:23 INFO] Starting Set [AERI set: name S409, 6 scans, 0 angle, D16300 command]
[Ingest 23:16:23 INFO] Sending XML status message
[Status 23:16:23 INFO] Mirror angle: 0
[Mirror 23:16:23 INFO] rotating to position S
[Status 23:16:25 INFO] .SET file for ACQ96 ready
[Ingest 23:16:25 INFO] Starting acquisition
[Status 23:16:26 INFO] reading housekeeping
[Status 23:16:43 INFO] acquire complete
[Status 23:16:45 INFO] writing housekeeping
[Sequencer 23:16:45 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:16:45 INFO] incremented S scene to 409 completed views
[Sequencer 23:16:45 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:16:45 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:16:45 INFO] incremented to [AERI set: name T409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:16:45 INFO] S409.SIG(18)
[sigmove 23:16:45 DEBUG] transformed S409Ma.SPC -> S409MA.SPC
[sigmove 23:16:45 DEBUG] transformed S409Mb.SPC -> S409MB.SPC
[sigmove 23:16:45 DEBUG] transformed S409Mc.SPC -> S409MC.SPC
[sigmove 23:16:45 DEBUG] transformed S409Md.SPC -> S409MD.SPC
[sigmove 23:16:45 DEBUG] transformed S409Me.SPC -> S409ME.SPC
[sigmove 23:16:45 DEBUG] transformed S409Mf.SPC -> S409MF.SPC
[Status 23:16:45 INFO] data for S409 transferred to science data processing
[Tidy 23:16:45 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:16:45 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:16:45 INFO] resetting WatchDogTimer
[Status 23:16:45 INFO] Starting Set [AERI set: name T409, 6 scans, 0 angle, D16300 command]
[Ingest 23:16:45 INFO] Sending XML status message
[Status 23:16:45 INFO] Mirror angle: 0
[Mirror 23:16:46 INFO] rotating to position T
[Status 23:16:46 INFO] .SET file for ACQ96 ready
[Ingest 23:16:47 INFO] Starting acquisition
[Status 23:16:47 INFO] reading housekeeping
[Status 23:17:05 INFO] acquire complete
[Status 23:17:06 INFO] writing housekeeping
[Sequencer 23:17:06 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:17:06 INFO] incremented T scene to 409 completed views
[Sequencer 23:17:06 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:17:06 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:17:06 INFO] incremented to [AERI set: name U409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:17:06 INFO] T409.SIG(18)
[sigmove 23:17:06 DEBUG] transformed T409Ma.SPC -> T409MA.SPC
[sigmove 23:17:06 DEBUG] transformed T409Mb.SPC -> T409MB.SPC
[sigmove 23:17:06 DEBUG] transformed T409Mc.SPC -> T409MC.SPC
[sigmove 23:17:06 DEBUG] transformed T409Md.SPC -> T409MD.SPC
[sigmove 23:17:06 DEBUG] transformed T409Me.SPC -> T409ME.SPC
[sigmove 23:17:06 DEBUG] transformed T409Mf.SPC -> T409MF.SPC
[Status 23:17:06 INFO] data for T409 transferred to science data processing
[Tidy 23:17:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:17:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:17:06 INFO] resetting WatchDogTimer
[Status 23:17:06 INFO] Starting Set [AERI set: name U409, 6 scans, 0 angle, D16300 command]
[Ingest 23:17:06 INFO] Sending XML status message
[Status 23:17:06 INFO] Mirror angle: 0
[Mirror 23:17:07 INFO] rotating to position U
[Status 23:17:08 INFO] .SET file for ACQ96 ready
[Ingest 23:17:08 INFO] Starting acquisition
[Status 23:17:09 INFO] reading housekeeping
[Status 23:17:26 INFO] acquire complete
[Status 23:17:27 INFO] writing housekeeping
[Sequencer 23:17:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:17:27 INFO] incremented U scene to 409 completed views
[Sequencer 23:17:27 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:17:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:17:27 INFO] incremented to [AERI set: name V409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:17:27 INFO] U409.SIG(18)
[sigmove 23:17:27 DEBUG] transformed U409Ma.SPC -> U409MA.SPC
[sigmove 23:17:27 DEBUG] transformed U409Mb.SPC -> U409MB.SPC
[sigmove 23:17:27 DEBUG] transformed U409Mc.SPC -> U409MC.SPC
[sigmove 23:17:27 DEBUG] transformed U409Md.SPC -> U409MD.SPC
[sigmove 23:17:27 DEBUG] transformed U409Me.SPC -> U409ME.SPC
[sigmove 23:17:27 DEBUG] transformed U409Mf.SPC -> U409MF.SPC
[Status 23:17:27 INFO] data for U409 transferred to science data processing
[Tidy 23:17:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:17:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:17:27 INFO] resetting WatchDogTimer
[Status 23:17:28 INFO] Starting Set [AERI set: name V409, 6 scans, 0 angle, D16300 command]
[Ingest 23:17:28 INFO] Sending XML status message
[Status 23:17:28 INFO] Mirror angle: 0
[Mirror 23:17:28 INFO] rotating to position V
[Status 23:17:29 INFO] .SET file for ACQ96 ready
[Ingest 23:17:29 INFO] Starting acquisition
[Status 23:17:30 INFO] reading housekeeping
[Status 23:17:47 INFO] acquire complete
[Status 23:17:49 INFO] writing housekeeping
[Sequencer 23:17:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:17:49 INFO] incremented V scene to 409 completed views
[Sequencer 23:17:49 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:17:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:17:49 INFO] incremented to [AERI set: name W409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:17:49 INFO] V409.SIG(18)
[sigmove 23:17:49 DEBUG] transformed V409Ma.SPC -> V409MA.SPC
[sigmove 23:17:49 DEBUG] transformed V409Mb.SPC -> V409MB.SPC
[sigmove 23:17:49 DEBUG] transformed V409Mc.SPC -> V409MC.SPC
[sigmove 23:17:49 DEBUG] transformed V409Md.SPC -> V409MD.SPC
[sigmove 23:17:49 DEBUG] transformed V409Me.SPC -> V409ME.SPC
[sigmove 23:17:49 DEBUG] transformed V409Mf.SPC -> V409MF.SPC
[Status 23:17:49 INFO] data for V409 transferred to science data processing
[Tidy 23:17:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:17:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:17:49 INFO] resetting WatchDogTimer
[Status 23:17:49 INFO] Starting Set [AERI set: name W409, 6 scans, 0 angle, D16300 command]
[Ingest 23:17:49 INFO] Sending XML status message
[Status 23:17:49 INFO] Mirror angle: 0
[Mirror 23:17:50 INFO] rotating to position W
[Status 23:17:50 INFO] .SET file for ACQ96 ready
[Ingest 23:17:51 INFO] Starting acquisition
[Status 23:17:51 INFO] reading housekeeping
[Status 23:18:09 INFO] acquire complete
[Status 23:18:10 INFO] writing housekeeping
[Sequencer 23:18:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:18:10 INFO] incremented W scene to 409 completed views
[Sequencer 23:18:10 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:18:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:18:10 INFO] incremented to [AERI set: name X409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:18:10 INFO] W409.SIG(18)
[sigmove 23:18:10 DEBUG] transformed W409Ma.SPC -> W409MA.SPC
[sigmove 23:18:10 DEBUG] transformed W409Mb.SPC -> W409MB.SPC
[sigmove 23:18:10 DEBUG] transformed W409Mc.SPC -> W409MC.SPC
[sigmove 23:18:10 DEBUG] transformed W409Md.SPC -> W409MD.SPC
[sigmove 23:18:10 DEBUG] transformed W409Me.SPC -> W409ME.SPC
[sigmove 23:18:10 DEBUG] transformed W409Mf.SPC -> W409MF.SPC
[Status 23:18:10 INFO] data for W409 transferred to science data processing
[Tidy 23:18:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:18:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:18:10 INFO] resetting WatchDogTimer
[Status 23:18:10 INFO] Starting Set [AERI set: name X409, 6 scans, 0 angle, D16300 command]
[Ingest 23:18:10 INFO] Sending XML status message
[Status 23:18:10 INFO] Mirror angle: 0
[Mirror 23:18:11 INFO] rotating to position X
[Status 23:18:12 INFO] .SET file for ACQ96 ready
[Ingest 23:18:12 INFO] Starting acquisition
[Status 23:18:12 INFO] reading housekeeping
[Status 23:18:30 INFO] acquire complete
[Status 23:18:31 INFO] writing housekeeping
[Sequencer 23:18:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:18:31 INFO] incremented X scene to 409 completed views
[Sequencer 23:18:31 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:18:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:18:31 INFO] incremented to [AERI set: name Y409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:18:31 INFO] X409.SIG(18)
[sigmove 23:18:31 DEBUG] transformed X409Ma.SPC -> X409MA.SPC
[sigmove 23:18:31 DEBUG] transformed X409Mb.SPC -> X409MB.SPC
[sigmove 23:18:31 DEBUG] transformed X409Mc.SPC -> X409MC.SPC
[sigmove 23:18:31 DEBUG] transformed X409Md.SPC -> X409MD.SPC
[sigmove 23:18:31 DEBUG] transformed X409Me.SPC -> X409ME.SPC
[sigmove 23:18:31 DEBUG] transformed X409Mf.SPC -> X409MF.SPC
[Status 23:18:31 INFO] data for X409 transferred to science data processing
[Tidy 23:18:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:18:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:18:31 INFO] resetting WatchDogTimer
[Status 23:18:32 INFO] Starting Set [AERI set: name Y409, 6 scans, 0 angle, D16300 command]
[Ingest 23:18:32 INFO] Sending XML status message
[Status 23:18:32 INFO] Mirror angle: 0
[Mirror 23:18:32 INFO] rotating to position Y
[Status 23:18:33 INFO] .SET file for ACQ96 ready
[Ingest 23:18:33 INFO] Starting acquisition
[Status 23:18:34 INFO] reading housekeeping
[Status 23:18:51 INFO] acquire complete
[Status 23:18:52 INFO] writing housekeeping
[Sequencer 23:18:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:18:52 INFO] incremented Y scene to 409 completed views
[Sequencer 23:18:52 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:18:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:18:52 INFO] incremented to [AERI set: name Z409, 6 scans, 0 angle, D16300 command] set
[sigmove 23:18:52 INFO] Y409.SIG(18)
[sigmove 23:18:52 DEBUG] transformed Y409Ma.SPC -> Y409MA.SPC
[sigmove 23:18:52 DEBUG] transformed Y409Mb.SPC -> Y409MB.SPC
[sigmove 23:18:52 DEBUG] transformed Y409Mc.SPC -> Y409MC.SPC
[sigmove 23:18:52 DEBUG] transformed Y409Md.SPC -> Y409MD.SPC
[sigmove 23:18:52 DEBUG] transformed Y409Me.SPC -> Y409ME.SPC
[sigmove 23:18:53 DEBUG] transformed Y409Mf.SPC -> Y409MF.SPC
[Status 23:18:53 INFO] data for Y409 transferred to science data processing
[Tidy 23:18:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:18:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:18:53 INFO] resetting WatchDogTimer
[Status 23:18:53 INFO] Starting Set [AERI set: name Z409, 6 scans, 0 angle, D16300 command]
[Ingest 23:18:53 INFO] Sending XML status message
[Status 23:18:53 INFO] Mirror angle: 0
[Mirror 23:18:54 INFO] rotating to position Z
[Status 23:18:54 INFO] .SET file for ACQ96 ready
[Ingest 23:18:55 INFO] Starting acquisition
[Status 23:18:55 INFO] reading housekeeping
[Status 23:19:13 INFO] acquire complete
[Status 23:19:14 INFO] writing housekeeping
[Sequencer 23:19:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:19:14 INFO] incremented Z scene to 409 completed views
[Sequencer 23:19:14 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:19:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:19:14 INFO] incremented to [AERI set: name A410, 6 scans, 120 angle, D28300 command] set
[sigmove 23:19:14 INFO] Z409.SIG(18)
[sigmove 23:19:14 DEBUG] transformed Z409Ma.SPC -> Z409MA.SPC
[sigmove 23:19:14 DEBUG] transformed Z409Mb.SPC -> Z409MB.SPC
[sigmove 23:19:14 DEBUG] transformed Z409Mc.SPC -> Z409MC.SPC
[sigmove 23:19:14 DEBUG] transformed Z409Md.SPC -> Z409MD.SPC
[sigmove 23:19:14 DEBUG] transformed Z409Me.SPC -> Z409ME.SPC
[sigmove 23:19:14 DEBUG] transformed Z409Mf.SPC -> Z409MF.SPC
[Status 23:19:14 INFO] data for Z409 transferred to science data processing
[Tidy 23:19:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:19:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:19:14 INFO] resetting WatchDogTimer
[Status 23:19:14 INFO] Starting Set [AERI set: name A410, 6 scans, 120 angle, D28300 command]
[Ingest 23:19:14 INFO] Sending XML status message
[Status 23:19:14 INFO] Mirror angle: 120
[Mirror 23:19:15 INFO] rotating to position A
[Status 23:19:16 INFO] .SET file for ACQ96 ready
[Ingest 23:19:17 INFO] Starting acquisition
[Status 23:19:18 INFO] reading housekeeping
[Status 23:19:35 INFO] acquire complete
[Status 23:19:36 INFO] writing housekeeping
[Sequencer 23:19:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:19:36 INFO] incremented A scene to 410 completed views
[Sequencer 23:19:36 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:19:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:19:36 INFO] incremented to [AERI set: name H410, 6 scans, 60 angle, D22500 command] set
[sigmove 23:19:36 INFO] A410.SIG(18)
[sigmove 23:19:36 DEBUG] transformed A410Ma.SPC -> A410MA.SPC
[sigmove 23:19:36 DEBUG] transformed A410Mb.SPC -> A410MB.SPC
[sigmove 23:19:36 DEBUG] transformed A410Mc.SPC -> A410MC.SPC
[sigmove 23:19:36 DEBUG] transformed A410Md.SPC -> A410MD.SPC
[sigmove 23:19:36 DEBUG] transformed A410Me.SPC -> A410ME.SPC
[sigmove 23:19:36 DEBUG] transformed A410Mf.SPC -> A410MF.SPC
[Status 23:19:36 INFO] data for A410 transferred to science data processing
[Tidy 23:19:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:19:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:19:36 INFO] resetting WatchDogTimer
[Status 23:19:37 INFO] Starting Set [AERI set: name H410, 6 scans, 60 angle, D22500 command]
[Ingest 23:19:37 INFO] Sending XML status message
[Status 23:19:37 INFO] Mirror angle: 60
[Mirror 23:19:37 INFO] rotating to position H
[Status 23:19:38 INFO] .SET file for ACQ96 ready
[Ingest 23:19:39 INFO] Starting acquisition
[Status 23:19:39 INFO] reading housekeeping
[Status 23:19:57 INFO] acquire complete
[Status 23:19:59 INFO] writing housekeeping
[Sequencer 23:19:59 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:19:59 INFO] incremented H scene to 410 completed views
[Sequencer 23:19:59 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:19:59 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:19:59 INFO] incremented to [AERI set: name S410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:19:59 INFO] H410.SIG(18)
[sigmove 23:19:59 DEBUG] transformed H410Ma.SPC -> H410MA.SPC
[sigmove 23:19:59 DEBUG] transformed H410Mb.SPC -> H410MB.SPC
[sigmove 23:19:59 DEBUG] transformed H410Mc.SPC -> H410MC.SPC
[sigmove 23:19:59 DEBUG] transformed H410Md.SPC -> H410MD.SPC
[sigmove 23:19:59 DEBUG] transformed H410Me.SPC -> H410ME.SPC
[sigmove 23:19:59 DEBUG] transformed H410Mf.SPC -> H410MF.SPC
[Status 23:19:59 INFO] data for H410 transferred to science data processing
[Tidy 23:19:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:19:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:19:59 INFO] resetting WatchDogTimer
[Status 23:19:59 INFO] Starting Set [AERI set: name S410, 6 scans, 0 angle, D16300 command]
[Ingest 23:19:59 INFO] Sending XML status message
[Status 23:19:59 INFO] Mirror angle: 0
[Mirror 23:20:00 INFO] rotating to position S
[Status 23:20:01 INFO] .SET file for ACQ96 ready
[Ingest 23:20:01 INFO] Starting acquisition
[Status 23:20:02 INFO] reading housekeeping
[Status 23:20:20 INFO] acquire complete
[Status 23:20:21 INFO] writing housekeeping
[Sequencer 23:20:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:20:21 INFO] incremented S scene to 410 completed views
[Sequencer 23:20:21 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:20:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:20:21 INFO] incremented to [AERI set: name T410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:20:21 INFO] S410.SIG(18)
[sigmove 23:20:21 DEBUG] transformed S410Ma.SPC -> S410MA.SPC
[sigmove 23:20:21 DEBUG] transformed S410Mb.SPC -> S410MB.SPC
[sigmove 23:20:21 DEBUG] transformed S410Mc.SPC -> S410MC.SPC
[sigmove 23:20:21 DEBUG] transformed S410Md.SPC -> S410MD.SPC
[sigmove 23:20:21 DEBUG] transformed S410Me.SPC -> S410ME.SPC
[sigmove 23:20:21 DEBUG] transformed S410Mf.SPC -> S410MF.SPC
[Status 23:20:21 INFO] data for S410 transferred to science data processing
[Tidy 23:20:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:20:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:20:21 INFO] resetting WatchDogTimer
[Status 23:20:22 INFO] Starting Set [AERI set: name T410, 6 scans, 0 angle, D16300 command]
[Ingest 23:20:22 INFO] Sending XML status message
[Status 23:20:22 INFO] Mirror angle: 0
[Mirror 23:20:22 INFO] rotating to position T
[Status 23:20:23 INFO] .SET file for ACQ96 ready
[Ingest 23:20:23 INFO] Starting acquisition
[Status 23:20:24 INFO] reading housekeeping
[Status 23:20:41 INFO] acquire complete
[Status 23:20:43 INFO] writing housekeeping
[Sequencer 23:20:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:20:43 INFO] incremented T scene to 410 completed views
[Sequencer 23:20:43 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:20:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:20:43 INFO] incremented to [AERI set: name U410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:20:43 INFO] T410.SIG(18)
[sigmove 23:20:43 DEBUG] transformed T410Ma.SPC -> T410MA.SPC
[sigmove 23:20:43 DEBUG] transformed T410Mb.SPC -> T410MB.SPC
[sigmove 23:20:43 DEBUG] transformed T410Mc.SPC -> T410MC.SPC
[sigmove 23:20:43 DEBUG] transformed T410Md.SPC -> T410MD.SPC
[sigmove 23:20:43 DEBUG] transformed T410Me.SPC -> T410ME.SPC
[sigmove 23:20:43 DEBUG] transformed T410Mf.SPC -> T410MF.SPC
[Status 23:20:43 INFO] data for T410 transferred to science data processing
[Tidy 23:20:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:20:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:20:43 INFO] resetting WatchDogTimer
[Status 23:20:43 INFO] Starting Set [AERI set: name U410, 6 scans, 0 angle, D16300 command]
[Ingest 23:20:43 INFO] Sending XML status message
[Status 23:20:43 INFO] Mirror angle: 0
[Mirror 23:20:44 INFO] rotating to position U
[Status 23:20:44 INFO] .SET file for ACQ96 ready
[Ingest 23:20:45 INFO] Starting acquisition
[Status 23:20:46 INFO] reading housekeeping
[Status 23:21:04 INFO] acquire complete
[Status 23:21:05 INFO] writing housekeeping
[Sequencer 23:21:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:21:05 INFO] incremented U scene to 410 completed views
[Sequencer 23:21:05 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:21:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:21:05 INFO] incremented to [AERI set: name V410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:21:05 INFO] U410.SIG(18)
[sigmove 23:21:05 DEBUG] transformed U410Ma.SPC -> U410MA.SPC
[sigmove 23:21:05 DEBUG] transformed U410Mb.SPC -> U410MB.SPC
[sigmove 23:21:05 DEBUG] transformed U410Mc.SPC -> U410MC.SPC
[sigmove 23:21:05 DEBUG] transformed U410Md.SPC -> U410MD.SPC
[sigmove 23:21:05 DEBUG] transformed U410Me.SPC -> U410ME.SPC
[sigmove 23:21:05 DEBUG] transformed U410Mf.SPC -> U410MF.SPC
[Status 23:21:05 INFO] data for U410 transferred to science data processing
[Tidy 23:21:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:21:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:21:05 INFO] resetting WatchDogTimer
[Status 23:21:05 INFO] Starting Set [AERI set: name V410, 6 scans, 0 angle, D16300 command]
[Ingest 23:21:05 INFO] Sending XML status message
[Status 23:21:05 INFO] Mirror angle: 0
[Mirror 23:21:06 INFO] rotating to position V
[Status 23:21:07 INFO] .SET file for ACQ96 ready
[Ingest 23:21:07 INFO] Starting acquisition
[Status 23:21:08 INFO] reading housekeeping
[Status 23:21:25 INFO] acquire complete
[Status 23:21:26 INFO] writing housekeeping
[Sequencer 23:21:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:21:26 INFO] incremented V scene to 410 completed views
[Sequencer 23:21:26 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:21:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:21:26 INFO] incremented to [AERI set: name W410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:21:26 INFO] V410.SIG(18)
[sigmove 23:21:26 DEBUG] transformed V410Ma.SPC -> V410MA.SPC
[sigmove 23:21:26 DEBUG] transformed V410Mb.SPC -> V410MB.SPC
[sigmove 23:21:26 DEBUG] transformed V410Mc.SPC -> V410MC.SPC
[sigmove 23:21:26 DEBUG] transformed V410Md.SPC -> V410MD.SPC
[sigmove 23:21:26 DEBUG] transformed V410Me.SPC -> V410ME.SPC
[sigmove 23:21:26 DEBUG] transformed V410Mf.SPC -> V410MF.SPC
[Status 23:21:26 INFO] data for V410 transferred to science data processing
[Tidy 23:21:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:21:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:21:26 INFO] resetting WatchDogTimer
[Status 23:21:27 INFO] Starting Set [AERI set: name W410, 6 scans, 0 angle, D16300 command]
[Ingest 23:21:27 INFO] Sending XML status message
[Status 23:21:27 INFO] Mirror angle: 0
[Mirror 23:21:27 INFO] rotating to position W
[Status 23:21:28 INFO] .SET file for ACQ96 ready
[Ingest 23:21:28 INFO] Starting acquisition
[Status 23:21:29 INFO] reading housekeeping
[Status 23:21:46 INFO] acquire complete
[Status 23:21:47 INFO] writing housekeeping
[Sequencer 23:21:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:21:47 INFO] incremented W scene to 410 completed views
[Sequencer 23:21:47 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:21:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:21:47 INFO] incremented to [AERI set: name X410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:21:47 INFO] W410.SIG(18)
[sigmove 23:21:47 DEBUG] transformed W410Ma.SPC -> W410MA.SPC
[sigmove 23:21:47 DEBUG] transformed W410Mb.SPC -> W410MB.SPC
[sigmove 23:21:47 DEBUG] transformed W410Mc.SPC -> W410MC.SPC
[sigmove 23:21:47 DEBUG] transformed W410Md.SPC -> W410MD.SPC
[sigmove 23:21:47 DEBUG] transformed W410Me.SPC -> W410ME.SPC
[sigmove 23:21:47 DEBUG] transformed W410Mf.SPC -> W410MF.SPC
[Status 23:21:47 INFO] data for W410 transferred to science data processing
[Tidy 23:21:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:21:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:21:47 INFO] resetting WatchDogTimer
[Status 23:21:48 INFO] Starting Set [AERI set: name X410, 6 scans, 0 angle, D16300 command]
[Ingest 23:21:48 INFO] Sending XML status message
[Status 23:21:48 INFO] Mirror angle: 0
[Mirror 23:21:48 INFO] rotating to position X
[Status 23:21:49 INFO] .SET file for ACQ96 ready
[Ingest 23:21:50 INFO] Starting acquisition
[Status 23:21:50 INFO] reading housekeeping
[Status 23:22:07 INFO] acquire complete
[Status 23:22:09 INFO] writing housekeeping
[Sequencer 23:22:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:22:09 INFO] incremented X scene to 410 completed views
[Sequencer 23:22:09 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:22:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:22:09 INFO] incremented to [AERI set: name Y410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:22:09 INFO] X410.SIG(18)
[sigmove 23:22:09 DEBUG] transformed X410Ma.SPC -> X410MA.SPC
[sigmove 23:22:09 DEBUG] transformed X410Mb.SPC -> X410MB.SPC
[sigmove 23:22:09 DEBUG] transformed X410Mc.SPC -> X410MC.SPC
[sigmove 23:22:09 DEBUG] transformed X410Md.SPC -> X410MD.SPC
[sigmove 23:22:09 DEBUG] transformed X410Me.SPC -> X410ME.SPC
[sigmove 23:22:09 DEBUG] transformed X410Mf.SPC -> X410MF.SPC
[Status 23:22:09 INFO] data for X410 transferred to science data processing
[Tidy 23:22:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:22:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:22:09 INFO] resetting WatchDogTimer
[Status 23:22:09 INFO] Starting Set [AERI set: name Y410, 6 scans, 0 angle, D16300 command]
[Ingest 23:22:09 INFO] Sending XML status message
[Status 23:22:09 INFO] Mirror angle: 0
[Mirror 23:22:10 INFO] rotating to position Y
[Status 23:22:10 INFO] .SET file for ACQ96 ready
[Ingest 23:22:11 INFO] Starting acquisition
[Status 23:22:11 INFO] reading housekeeping
[Status 23:22:29 INFO] acquire complete
[Status 23:22:30 INFO] writing housekeeping
[Sequencer 23:22:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:22:30 INFO] incremented Y scene to 410 completed views
[Sequencer 23:22:30 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:22:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:22:30 INFO] incremented to [AERI set: name Z410, 6 scans, 0 angle, D16300 command] set
[sigmove 23:22:30 INFO] Y410.SIG(18)
[sigmove 23:22:30 DEBUG] transformed Y410Ma.SPC -> Y410MA.SPC
[sigmove 23:22:30 DEBUG] transformed Y410Mb.SPC -> Y410MB.SPC
[sigmove 23:22:30 DEBUG] transformed Y410Mc.SPC -> Y410MC.SPC
[sigmove 23:22:30 DEBUG] transformed Y410Md.SPC -> Y410MD.SPC
[sigmove 23:22:30 DEBUG] transformed Y410Me.SPC -> Y410ME.SPC
[sigmove 23:22:30 DEBUG] transformed Y410Mf.SPC -> Y410MF.SPC
[Status 23:22:30 INFO] data for Y410 transferred to science data processing
[Tidy 23:22:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:22:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:22:30 INFO] resetting WatchDogTimer
[Status 23:22:31 INFO] Starting Set [AERI set: name Z410, 6 scans, 0 angle, D16300 command]
[Ingest 23:22:31 INFO] Sending XML status message
[Status 23:22:31 INFO] Mirror angle: 0
[Mirror 23:22:31 INFO] rotating to position Z
[Status 23:22:32 INFO] .SET file for ACQ96 ready
[Ingest 23:22:32 INFO] Starting acquisition
[Status 23:22:33 INFO] reading housekeeping
[Status 23:22:50 INFO] acquire complete
[Status 23:22:51 INFO] writing housekeeping
[Sequencer 23:22:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:22:51 INFO] incremented Z scene to 410 completed views
[Sequencer 23:22:51 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:22:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:22:51 INFO] incremented to [AERI set: name H411, 6 scans, 60 angle, D22500 command] set
[sigmove 23:22:51 INFO] Z410.SIG(18)
[sigmove 23:22:51 DEBUG] transformed Z410Ma.SPC -> Z410MA.SPC
[sigmove 23:22:51 DEBUG] transformed Z410Mb.SPC -> Z410MB.SPC
[sigmove 23:22:51 DEBUG] transformed Z410Mc.SPC -> Z410MC.SPC
[sigmove 23:22:51 DEBUG] transformed Z410Md.SPC -> Z410MD.SPC
[sigmove 23:22:51 DEBUG] transformed Z410Me.SPC -> Z410ME.SPC
[sigmove 23:22:51 DEBUG] transformed Z410Mf.SPC -> Z410MF.SPC
[Status 23:22:51 INFO] data for Z410 transferred to science data processing
[Tidy 23:22:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:22:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:22:51 INFO] resetting WatchDogTimer
[Status 23:22:52 INFO] Starting Set [AERI set: name H411, 6 scans, 60 angle, D22500 command]
[Ingest 23:22:52 INFO] Sending XML status message
[Status 23:22:52 INFO] Mirror angle: 60
[Mirror 23:22:52 INFO] rotating to position H
[Status 23:22:54 INFO] .SET file for ACQ96 ready
[Ingest 23:22:54 INFO] Starting acquisition
[Status 23:22:55 INFO] reading housekeeping
[Status 23:23:13 INFO] acquire complete
[Status 23:23:14 INFO] writing housekeeping
[Sequencer 23:23:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:23:14 INFO] incremented H scene to 411 completed views
[Sequencer 23:23:14 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:23:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:23:14 INFO] incremented to [AERI set: name A411, 6 scans, 120 angle, D28300 command] set
[sigmove 23:23:14 INFO] H411.SIG(18)
[sigmove 23:23:14 DEBUG] transformed H411Ma.SPC -> H411MA.SPC
[sigmove 23:23:14 DEBUG] transformed H411Mb.SPC -> H411MB.SPC
[sigmove 23:23:14 DEBUG] transformed H411Mc.SPC -> H411MC.SPC
[sigmove 23:23:14 DEBUG] transformed H411Md.SPC -> H411MD.SPC
[sigmove 23:23:14 DEBUG] transformed H411Me.SPC -> H411ME.SPC
[sigmove 23:23:14 DEBUG] transformed H411Mf.SPC -> H411MF.SPC
[Status 23:23:14 INFO] data for H411 transferred to science data processing
[Tidy 23:23:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:23:14 INFO] A409.FIN(19),H409.FIN(19),S409.FIN(19),T409.FIN(19),U409.FIN(19),V409.FIN(19),W409.FIN(19),X409.FIN(19),Y409.FIN(19),Z409.FIN(19),A410.FIN(19),H410.FIN(19),S410.FIN(19),T410.FIN(19),U410.FIN(19),V410.FIN(19),W410.FIN(19),X410.FIN(19),Y410.FIN(19),Z410.FIN(19)
[sigmove 23:23:14 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:23:14 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:23:21 DEBUG] done zipping
[WatchDog 23:23:21 INFO] resetting WatchDogTimer
[Status 23:23:22 INFO] Starting Set [AERI set: name A411, 6 scans, 120 angle, D28300 command]
[Ingest 23:23:22 INFO] Sending XML status message
[Status 23:23:22 INFO] Mirror angle: 120
[Mirror 23:23:22 INFO] rotating to position A
[Status 23:23:24 INFO] .SET file for ACQ96 ready
[Ingest 23:23:24 INFO] Starting acquisition
[Status 23:23:25 INFO] reading housekeeping
[Status 23:23:42 INFO] acquire complete
[Status 23:23:43 INFO] writing housekeeping
[Sequencer 23:23:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:23:43 INFO] incremented A scene to 411 completed views
[Sequencer 23:23:43 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:23:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:23:43 INFO] incremented to [AERI set: name S411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:23:43 INFO] A411.SIG(18)
[sigmove 23:23:43 DEBUG] transformed A411Ma.SPC -> A411MA.SPC
[sigmove 23:23:43 DEBUG] transformed A411Mb.SPC -> A411MB.SPC
[sigmove 23:23:43 DEBUG] transformed A411Mc.SPC -> A411MC.SPC
[sigmove 23:23:43 DEBUG] transformed A411Md.SPC -> A411MD.SPC
[sigmove 23:23:43 DEBUG] transformed A411Me.SPC -> A411ME.SPC
[sigmove 23:23:43 DEBUG] transformed A411Mf.SPC -> A411MF.SPC
[Status 23:23:43 INFO] data for A411 transferred to science data processing
[Tidy 23:23:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:23:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:23:43 INFO] resetting WatchDogTimer
[Status 23:23:44 INFO] Starting Set [AERI set: name S411, 6 scans, 0 angle, D16300 command]
[Ingest 23:23:44 INFO] Sending XML status message
[Status 23:23:44 INFO] Mirror angle: 0
[Mirror 23:23:44 INFO] rotating to position S
[Status 23:23:46 INFO] .SET file for ACQ96 ready
[Ingest 23:23:46 INFO] Starting acquisition
[Status 23:23:47 INFO] reading housekeeping
[Status 23:24:04 INFO] acquire complete
[Status 23:24:05 INFO] writing housekeeping
[Sequencer 23:24:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:24:05 INFO] incremented S scene to 411 completed views
[Sequencer 23:24:05 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:24:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:24:05 INFO] incremented to [AERI set: name T411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:24:05 INFO] S411.SIG(18)
[sigmove 23:24:05 DEBUG] transformed S411Ma.SPC -> S411MA.SPC
[sigmove 23:24:06 DEBUG] transformed S411Mb.SPC -> S411MB.SPC
[sigmove 23:24:06 DEBUG] transformed S411Mc.SPC -> S411MC.SPC
[sigmove 23:24:06 DEBUG] transformed S411Md.SPC -> S411MD.SPC
[sigmove 23:24:06 DEBUG] transformed S411Me.SPC -> S411ME.SPC
[sigmove 23:24:06 DEBUG] transformed S411Mf.SPC -> S411MF.SPC
[Status 23:24:06 INFO] data for S411 transferred to science data processing
[Tidy 23:24:06 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:24:06 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:24:06 INFO] resetting WatchDogTimer
[Status 23:24:06 INFO] Starting Set [AERI set: name T411, 6 scans, 0 angle, D16300 command]
[Ingest 23:24:06 INFO] Sending XML status message
[Status 23:24:06 INFO] Mirror angle: 0
[Mirror 23:24:07 INFO] rotating to position T
[Status 23:24:07 INFO] .SET file for ACQ96 ready
[Ingest 23:24:08 INFO] Starting acquisition
[Status 23:24:08 INFO] reading housekeeping
[Status 23:24:27 INFO] acquire complete
[Status 23:24:28 INFO] writing housekeeping
[Sequencer 23:24:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:24:28 INFO] incremented T scene to 411 completed views
[Sequencer 23:24:28 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:24:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:24:28 INFO] incremented to [AERI set: name U411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:24:28 INFO] T411.SIG(18)
[sigmove 23:24:28 DEBUG] transformed T411Ma.SPC -> T411MA.SPC
[sigmove 23:24:28 DEBUG] transformed T411Mb.SPC -> T411MB.SPC
[sigmove 23:24:28 DEBUG] transformed T411Mc.SPC -> T411MC.SPC
[sigmove 23:24:28 DEBUG] transformed T411Md.SPC -> T411MD.SPC
[sigmove 23:24:28 DEBUG] transformed T411Me.SPC -> T411ME.SPC
[sigmove 23:24:28 DEBUG] transformed T411Mf.SPC -> T411MF.SPC
[Status 23:24:28 INFO] data for T411 transferred to science data processing
[Tidy 23:24:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:24:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:24:28 INFO] resetting WatchDogTimer
[Status 23:24:28 INFO] Starting Set [AERI set: name U411, 6 scans, 0 angle, D16300 command]
[Ingest 23:24:28 INFO] Sending XML status message
[Status 23:24:28 INFO] Mirror angle: 0
[Mirror 23:24:29 INFO] rotating to position U
[Status 23:24:30 INFO] .SET file for ACQ96 ready
[Ingest 23:24:30 INFO] Starting acquisition
[Status 23:24:31 INFO] reading housekeeping
[Status 23:24:48 INFO] acquire complete
[Status 23:24:49 INFO] writing housekeeping
[Sequencer 23:24:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:24:49 INFO] incremented U scene to 411 completed views
[Sequencer 23:24:49 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:24:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:24:49 INFO] incremented to [AERI set: name V411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:24:49 INFO] U411.SIG(18)
[sigmove 23:24:49 DEBUG] transformed U411Ma.SPC -> U411MA.SPC
[sigmove 23:24:49 DEBUG] transformed U411Mb.SPC -> U411MB.SPC
[sigmove 23:24:49 DEBUG] transformed U411Mc.SPC -> U411MC.SPC
[sigmove 23:24:49 DEBUG] transformed U411Md.SPC -> U411MD.SPC
[sigmove 23:24:49 DEBUG] transformed U411Me.SPC -> U411ME.SPC
[sigmove 23:24:49 DEBUG] transformed U411Mf.SPC -> U411MF.SPC
[Status 23:24:49 INFO] data for U411 transferred to science data processing
[Tidy 23:24:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:24:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:24:49 INFO] resetting WatchDogTimer
[Status 23:24:50 INFO] Starting Set [AERI set: name V411, 6 scans, 0 angle, D16300 command]
[Ingest 23:24:50 INFO] Sending XML status message
[Status 23:24:50 INFO] Mirror angle: 0
[Mirror 23:24:50 INFO] rotating to position V
[Status 23:24:51 INFO] .SET file for ACQ96 ready
[Ingest 23:24:51 INFO] Starting acquisition
[Status 23:24:52 INFO] reading housekeeping
[Status 23:25:09 INFO] acquire complete
[Status 23:25:10 INFO] writing housekeeping
[Sequencer 23:25:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:25:10 INFO] incremented V scene to 411 completed views
[Sequencer 23:25:10 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:25:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:25:10 INFO] incremented to [AERI set: name W411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:25:10 INFO] V411.SIG(18)
[sigmove 23:25:10 DEBUG] transformed V411Ma.SPC -> V411MA.SPC
[sigmove 23:25:10 DEBUG] transformed V411Mb.SPC -> V411MB.SPC
[sigmove 23:25:10 DEBUG] transformed V411Mc.SPC -> V411MC.SPC
[sigmove 23:25:10 DEBUG] transformed V411Md.SPC -> V411MD.SPC
[sigmove 23:25:10 DEBUG] transformed V411Me.SPC -> V411ME.SPC
[sigmove 23:25:10 DEBUG] transformed V411Mf.SPC -> V411MF.SPC
[Status 23:25:10 INFO] data for V411 transferred to science data processing
[Tidy 23:25:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:25:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:25:10 INFO] resetting WatchDogTimer
[Status 23:25:11 INFO] Starting Set [AERI set: name W411, 6 scans, 0 angle, D16300 command]
[Ingest 23:25:11 INFO] Sending XML status message
[Status 23:25:11 INFO] Mirror angle: 0
[Mirror 23:25:11 INFO] rotating to position W
[Status 23:25:12 INFO] .SET file for ACQ96 ready
[Ingest 23:25:12 INFO] Starting acquisition
[Status 23:25:13 INFO] reading housekeeping
[Status 23:25:30 INFO] acquire complete
[Status 23:25:32 INFO] writing housekeeping
[Sequencer 23:25:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:25:32 INFO] incremented W scene to 411 completed views
[Sequencer 23:25:32 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:25:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:25:32 INFO] incremented to [AERI set: name X411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:25:32 INFO] W411.SIG(18)
[sigmove 23:25:32 DEBUG] transformed W411Ma.SPC -> W411MA.SPC
[sigmove 23:25:32 DEBUG] transformed W411Mb.SPC -> W411MB.SPC
[sigmove 23:25:32 DEBUG] transformed W411Mc.SPC -> W411MC.SPC
[sigmove 23:25:32 DEBUG] transformed W411Md.SPC -> W411MD.SPC
[sigmove 23:25:32 DEBUG] transformed W411Me.SPC -> W411ME.SPC
[sigmove 23:25:32 DEBUG] transformed W411Mf.SPC -> W411MF.SPC
[Status 23:25:32 INFO] data for W411 transferred to science data processing
[Tidy 23:25:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:25:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:25:32 INFO] resetting WatchDogTimer
[Status 23:25:32 INFO] Starting Set [AERI set: name X411, 6 scans, 0 angle, D16300 command]
[Ingest 23:25:32 INFO] Sending XML status message
[Status 23:25:32 INFO] Mirror angle: 0
[Mirror 23:25:33 INFO] rotating to position X
[Status 23:25:33 INFO] .SET file for ACQ96 ready
[Ingest 23:25:34 INFO] Starting acquisition
[Status 23:25:35 INFO] reading housekeeping
[Status 23:25:52 INFO] acquire complete
[Status 23:25:53 INFO] writing housekeeping
[Sequencer 23:25:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:25:53 INFO] incremented X scene to 411 completed views
[Sequencer 23:25:53 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:25:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:25:53 INFO] incremented to [AERI set: name Y411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:25:53 INFO] X411.SIG(18)
[sigmove 23:25:53 DEBUG] transformed X411Ma.SPC -> X411MA.SPC
[sigmove 23:25:53 DEBUG] transformed X411Mb.SPC -> X411MB.SPC
[sigmove 23:25:53 DEBUG] transformed X411Mc.SPC -> X411MC.SPC
[sigmove 23:25:53 DEBUG] transformed X411Md.SPC -> X411MD.SPC
[sigmove 23:25:53 DEBUG] transformed X411Me.SPC -> X411ME.SPC
[sigmove 23:25:53 DEBUG] transformed X411Mf.SPC -> X411MF.SPC
[Status 23:25:53 INFO] data for X411 transferred to science data processing
[Tidy 23:25:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:25:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:25:53 INFO] resetting WatchDogTimer
[Status 23:25:54 INFO] Starting Set [AERI set: name Y411, 6 scans, 0 angle, D16300 command]
[Ingest 23:25:54 INFO] Sending XML status message
[Status 23:25:54 INFO] Mirror angle: 0
[Mirror 23:25:54 INFO] rotating to position Y
[Status 23:25:55 INFO] .SET file for ACQ96 ready
[Ingest 23:25:55 INFO] Starting acquisition
[Status 23:25:56 INFO] reading housekeeping
[Status 23:26:13 INFO] acquire complete
[Status 23:26:14 INFO] writing housekeeping
[Sequencer 23:26:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:26:14 INFO] incremented Y scene to 411 completed views
[Sequencer 23:26:14 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:26:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:26:14 INFO] incremented to [AERI set: name Z411, 6 scans, 0 angle, D16300 command] set
[sigmove 23:26:14 INFO] Y411.SIG(18)
[sigmove 23:26:14 DEBUG] transformed Y411Ma.SPC -> Y411MA.SPC
[sigmove 23:26:14 DEBUG] transformed Y411Mb.SPC -> Y411MB.SPC
[sigmove 23:26:14 DEBUG] transformed Y411Mc.SPC -> Y411MC.SPC
[sigmove 23:26:14 DEBUG] transformed Y411Md.SPC -> Y411MD.SPC
[sigmove 23:26:14 DEBUG] transformed Y411Me.SPC -> Y411ME.SPC
[sigmove 23:26:14 DEBUG] transformed Y411Mf.SPC -> Y411MF.SPC
[Status 23:26:14 INFO] data for Y411 transferred to science data processing
[Tidy 23:26:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:26:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:26:14 INFO] resetting WatchDogTimer
[Status 23:26:15 INFO] Starting Set [AERI set: name Z411, 6 scans, 0 angle, D16300 command]
[Ingest 23:26:15 INFO] Sending XML status message
[Status 23:26:15 INFO] Mirror angle: 0
[Mirror 23:26:15 INFO] rotating to position Z
[Status 23:26:16 INFO] .SET file for ACQ96 ready
[Ingest 23:26:16 INFO] Starting acquisition
[Status 23:26:17 INFO] reading housekeeping
[Status 23:26:34 INFO] acquire complete
[Status 23:26:36 INFO] writing housekeeping
[Sequencer 23:26:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:26:36 INFO] incremented Z scene to 411 completed views
[Sequencer 23:26:36 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:26:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:26:36 INFO] incremented to [AERI set: name A412, 6 scans, 120 angle, D28300 command] set
[sigmove 23:26:36 INFO] Z411.SIG(18)
[sigmove 23:26:36 DEBUG] transformed Z411Ma.SPC -> Z411MA.SPC
[sigmove 23:26:36 DEBUG] transformed Z411Mb.SPC -> Z411MB.SPC
[sigmove 23:26:36 DEBUG] transformed Z411Mc.SPC -> Z411MC.SPC
[sigmove 23:26:36 DEBUG] transformed Z411Md.SPC -> Z411MD.SPC
[sigmove 23:26:36 DEBUG] transformed Z411Me.SPC -> Z411ME.SPC
[sigmove 23:26:36 DEBUG] transformed Z411Mf.SPC -> Z411MF.SPC
[Status 23:26:36 INFO] data for Z411 transferred to science data processing
[Tidy 23:26:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:26:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:26:36 INFO] resetting WatchDogTimer
[Status 23:26:36 INFO] Starting Set [AERI set: name A412, 6 scans, 120 angle, D28300 command]
[Ingest 23:26:36 INFO] Sending XML status message
[Status 23:26:36 INFO] Mirror angle: 120
[Mirror 23:26:37 INFO] rotating to position A
[Status 23:26:38 INFO] .SET file for ACQ96 ready
[Ingest 23:26:39 INFO] Starting acquisition
[Status 23:26:39 INFO] reading housekeeping
[Status 23:26:57 INFO] acquire complete
[Status 23:26:58 INFO] writing housekeeping
[Sequencer 23:26:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:26:58 INFO] incremented A scene to 412 completed views
[Sequencer 23:26:58 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:26:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:26:58 INFO] incremented to [AERI set: name H412, 6 scans, 60 angle, D22500 command] set
[sigmove 23:26:58 INFO] A412.SIG(18)
[sigmove 23:26:58 DEBUG] transformed A412Ma.SPC -> A412MA.SPC
[sigmove 23:26:58 DEBUG] transformed A412Mb.SPC -> A412MB.SPC
[sigmove 23:26:58 DEBUG] transformed A412Mc.SPC -> A412MC.SPC
[sigmove 23:26:58 DEBUG] transformed A412Md.SPC -> A412MD.SPC
[sigmove 23:26:58 DEBUG] transformed A412Me.SPC -> A412ME.SPC
[sigmove 23:26:58 DEBUG] transformed A412Mf.SPC -> A412MF.SPC
[Status 23:26:58 INFO] data for A412 transferred to science data processing
[Tidy 23:26:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:26:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:26:58 INFO] resetting WatchDogTimer
[Status 23:26:59 INFO] Starting Set [AERI set: name H412, 6 scans, 60 angle, D22500 command]
[Ingest 23:26:59 INFO] Sending XML status message
[Status 23:26:59 INFO] Mirror angle: 60
[Mirror 23:26:59 INFO] rotating to position H
[Status 23:27:00 INFO] .SET file for ACQ96 ready
[Ingest 23:27:01 INFO] Starting acquisition
[Status 23:27:01 INFO] reading housekeeping
[Status 23:27:19 INFO] acquire complete
[Status 23:27:21 INFO] writing housekeeping
[Sequencer 23:27:21 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:27:21 INFO] incremented H scene to 412 completed views
[Sequencer 23:27:21 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:27:21 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:27:21 INFO] incremented to [AERI set: name S412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:27:21 INFO] H412.SIG(18)
[sigmove 23:27:21 DEBUG] transformed H412Ma.SPC -> H412MA.SPC
[sigmove 23:27:21 DEBUG] transformed H412Mb.SPC -> H412MB.SPC
[sigmove 23:27:21 DEBUG] transformed H412Mc.SPC -> H412MC.SPC
[sigmove 23:27:21 DEBUG] transformed H412Md.SPC -> H412MD.SPC
[sigmove 23:27:21 DEBUG] transformed H412Me.SPC -> H412ME.SPC
[sigmove 23:27:21 DEBUG] transformed H412Mf.SPC -> H412MF.SPC
[Status 23:27:21 INFO] data for H412 transferred to science data processing
[Tidy 23:27:21 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:27:21 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:27:21 INFO] resetting WatchDogTimer
[Status 23:27:21 INFO] Starting Set [AERI set: name S412, 6 scans, 0 angle, D16300 command]
[Ingest 23:27:21 INFO] Sending XML status message
[Status 23:27:21 INFO] Mirror angle: 0
[Mirror 23:27:22 INFO] rotating to position S
[Status 23:27:23 INFO] .SET file for ACQ96 ready
[Ingest 23:27:23 INFO] Starting acquisition
[Status 23:27:24 INFO] reading housekeeping
[Status 23:27:42 INFO] acquire complete
[Status 23:27:43 INFO] writing housekeeping
[Sequencer 23:27:43 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:27:43 INFO] incremented S scene to 412 completed views
[Sequencer 23:27:43 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:27:43 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:27:43 INFO] incremented to [AERI set: name T412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:27:43 INFO] S412.SIG(18)
[sigmove 23:27:43 DEBUG] transformed S412Ma.SPC -> S412MA.SPC
[sigmove 23:27:43 DEBUG] transformed S412Mb.SPC -> S412MB.SPC
[sigmove 23:27:43 DEBUG] transformed S412Mc.SPC -> S412MC.SPC
[sigmove 23:27:43 DEBUG] transformed S412Md.SPC -> S412MD.SPC
[sigmove 23:27:43 DEBUG] transformed S412Me.SPC -> S412ME.SPC
[sigmove 23:27:43 DEBUG] transformed S412Mf.SPC -> S412MF.SPC
[Status 23:27:43 INFO] data for S412 transferred to science data processing
[Tidy 23:27:43 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:27:43 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:27:43 INFO] resetting WatchDogTimer
[Status 23:27:43 INFO] Starting Set [AERI set: name T412, 6 scans, 0 angle, D16300 command]
[Ingest 23:27:43 INFO] Sending XML status message
[Status 23:27:43 INFO] Mirror angle: 0
[Mirror 23:27:44 INFO] rotating to position T
[Status 23:27:45 INFO] .SET file for ACQ96 ready
[Ingest 23:27:45 INFO] Starting acquisition
[Status 23:27:46 INFO] reading housekeeping
[Status 23:28:03 INFO] acquire complete
[Status 23:28:04 INFO] writing housekeeping
[Sequencer 23:28:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:28:04 INFO] incremented T scene to 412 completed views
[Sequencer 23:28:04 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:28:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:28:04 INFO] incremented to [AERI set: name U412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:28:04 INFO] T412.SIG(18)
[sigmove 23:28:04 DEBUG] transformed T412Ma.SPC -> T412MA.SPC
[sigmove 23:28:04 DEBUG] transformed T412Mb.SPC -> T412MB.SPC
[sigmove 23:28:04 DEBUG] transformed T412Mc.SPC -> T412MC.SPC
[sigmove 23:28:04 DEBUG] transformed T412Md.SPC -> T412MD.SPC
[sigmove 23:28:04 DEBUG] transformed T412Me.SPC -> T412ME.SPC
[sigmove 23:28:04 DEBUG] transformed T412Mf.SPC -> T412MF.SPC
[Status 23:28:04 INFO] data for T412 transferred to science data processing
[Tidy 23:28:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:28:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:28:04 INFO] resetting WatchDogTimer
[Status 23:28:05 INFO] Starting Set [AERI set: name U412, 6 scans, 0 angle, D16300 command]
[Ingest 23:28:05 INFO] Sending XML status message
[Status 23:28:05 INFO] Mirror angle: 0
[Mirror 23:28:05 INFO] rotating to position U
[Status 23:28:06 INFO] .SET file for ACQ96 ready
[Ingest 23:28:06 INFO] Starting acquisition
[Status 23:28:07 INFO] reading housekeeping
[Status 23:28:24 INFO] acquire complete
[Status 23:28:26 INFO] writing housekeeping
[Sequencer 23:28:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:28:26 INFO] incremented U scene to 412 completed views
[Sequencer 23:28:26 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:28:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:28:26 INFO] incremented to [AERI set: name V412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:28:26 INFO] U412.SIG(18)
[sigmove 23:28:26 DEBUG] transformed U412Ma.SPC -> U412MA.SPC
[sigmove 23:28:26 DEBUG] transformed U412Mb.SPC -> U412MB.SPC
[sigmove 23:28:26 DEBUG] transformed U412Mc.SPC -> U412MC.SPC
[sigmove 23:28:26 DEBUG] transformed U412Md.SPC -> U412MD.SPC
[sigmove 23:28:26 DEBUG] transformed U412Me.SPC -> U412ME.SPC
[sigmove 23:28:26 DEBUG] transformed U412Mf.SPC -> U412MF.SPC
[Status 23:28:26 INFO] data for U412 transferred to science data processing
[Tidy 23:28:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:28:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:28:26 INFO] resetting WatchDogTimer
[Status 23:28:26 INFO] Starting Set [AERI set: name V412, 6 scans, 0 angle, D16300 command]
[Ingest 23:28:26 INFO] Sending XML status message
[Status 23:28:26 INFO] Mirror angle: 0
[Mirror 23:28:27 INFO] rotating to position V
[Status 23:28:27 INFO] .SET file for ACQ96 ready
[Ingest 23:28:28 INFO] Starting acquisition
[Status 23:28:28 INFO] reading housekeeping
[Status 23:28:46 INFO] acquire complete
[Status 23:28:47 INFO] writing housekeeping
[Sequencer 23:28:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:28:47 INFO] incremented V scene to 412 completed views
[Sequencer 23:28:47 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:28:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:28:47 INFO] incremented to [AERI set: name W412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:28:47 INFO] V412.SIG(18)
[sigmove 23:28:47 DEBUG] transformed V412Ma.SPC -> V412MA.SPC
[sigmove 23:28:47 DEBUG] transformed V412Mb.SPC -> V412MB.SPC
[sigmove 23:28:47 DEBUG] transformed V412Mc.SPC -> V412MC.SPC
[sigmove 23:28:47 DEBUG] transformed V412Md.SPC -> V412MD.SPC
[sigmove 23:28:47 DEBUG] transformed V412Me.SPC -> V412ME.SPC
[sigmove 23:28:47 DEBUG] transformed V412Mf.SPC -> V412MF.SPC
[Status 23:28:47 INFO] data for V412 transferred to science data processing
[Tidy 23:28:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:28:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:28:47 INFO] resetting WatchDogTimer
[Status 23:28:47 INFO] Starting Set [AERI set: name W412, 6 scans, 0 angle, D16300 command]
[Ingest 23:28:47 INFO] Sending XML status message
[Status 23:28:47 INFO] Mirror angle: 0
[Mirror 23:28:48 INFO] rotating to position W
[Status 23:28:49 INFO] .SET file for ACQ96 ready
[Ingest 23:28:49 INFO] Starting acquisition
[Status 23:28:50 INFO] reading housekeeping
[Status 23:29:07 INFO] acquire complete
[Status 23:29:08 INFO] writing housekeeping
[Sequencer 23:29:08 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:29:08 INFO] incremented W scene to 412 completed views
[Sequencer 23:29:08 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:29:08 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:29:08 INFO] incremented to [AERI set: name X412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:29:08 INFO] W412.SIG(18)
[sigmove 23:29:08 DEBUG] transformed W412Ma.SPC -> W412MA.SPC
[sigmove 23:29:08 DEBUG] transformed W412Mb.SPC -> W412MB.SPC
[sigmove 23:29:08 DEBUG] transformed W412Mc.SPC -> W412MC.SPC
[sigmove 23:29:08 DEBUG] transformed W412Md.SPC -> W412MD.SPC
[sigmove 23:29:08 DEBUG] transformed W412Me.SPC -> W412ME.SPC
[sigmove 23:29:08 DEBUG] transformed W412Mf.SPC -> W412MF.SPC
[Status 23:29:08 INFO] data for W412 transferred to science data processing
[Tidy 23:29:08 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:29:08 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:29:08 INFO] resetting WatchDogTimer
[Status 23:29:09 INFO] Starting Set [AERI set: name X412, 6 scans, 0 angle, D16300 command]
[Ingest 23:29:09 INFO] Sending XML status message
[Status 23:29:09 INFO] Mirror angle: 0
[Mirror 23:29:09 INFO] rotating to position X
[Status 23:29:10 INFO] .SET file for ACQ96 ready
[Ingest 23:29:10 INFO] Starting acquisition
[Status 23:29:11 INFO] reading housekeeping
[Status 23:29:28 INFO] acquire complete
[Status 23:29:30 INFO] writing housekeeping
[Sequencer 23:29:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:29:30 INFO] incremented X scene to 412 completed views
[Sequencer 23:29:30 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:29:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:29:30 INFO] incremented to [AERI set: name Y412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:29:30 INFO] X412.SIG(18)
[sigmove 23:29:30 DEBUG] transformed X412Ma.SPC -> X412MA.SPC
[sigmove 23:29:30 DEBUG] transformed X412Mb.SPC -> X412MB.SPC
[sigmove 23:29:30 DEBUG] transformed X412Mc.SPC -> X412MC.SPC
[sigmove 23:29:30 DEBUG] transformed X412Md.SPC -> X412MD.SPC
[sigmove 23:29:30 DEBUG] transformed X412Me.SPC -> X412ME.SPC
[sigmove 23:29:30 DEBUG] transformed X412Mf.SPC -> X412MF.SPC
[Status 23:29:30 INFO] data for X412 transferred to science data processing
[Tidy 23:29:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:29:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:29:30 INFO] resetting WatchDogTimer
[Status 23:29:30 INFO] Starting Set [AERI set: name Y412, 6 scans, 0 angle, D16300 command]
[Ingest 23:29:30 INFO] Sending XML status message
[Status 23:29:30 INFO] Mirror angle: 0
[Mirror 23:29:31 INFO] rotating to position Y
[Status 23:29:31 INFO] .SET file for ACQ96 ready
[Ingest 23:29:32 INFO] Starting acquisition
[Status 23:29:32 INFO] reading housekeeping
[Status 23:29:50 INFO] acquire complete
[Status 23:29:51 INFO] writing housekeeping
[Sequencer 23:29:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:29:51 INFO] incremented Y scene to 412 completed views
[Sequencer 23:29:51 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:29:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:29:51 INFO] incremented to [AERI set: name Z412, 6 scans, 0 angle, D16300 command] set
[sigmove 23:29:51 INFO] Y412.SIG(18)
[sigmove 23:29:51 DEBUG] transformed Y412Ma.SPC -> Y412MA.SPC
[sigmove 23:29:51 DEBUG] transformed Y412Mb.SPC -> Y412MB.SPC
[sigmove 23:29:51 DEBUG] transformed Y412Mc.SPC -> Y412MC.SPC
[sigmove 23:29:51 DEBUG] transformed Y412Md.SPC -> Y412MD.SPC
[sigmove 23:29:51 DEBUG] transformed Y412Me.SPC -> Y412ME.SPC
[sigmove 23:29:51 DEBUG] transformed Y412Mf.SPC -> Y412MF.SPC
[Status 23:29:51 INFO] data for Y412 transferred to science data processing
[Tidy 23:29:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:29:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:29:51 INFO] resetting WatchDogTimer
[Status 23:29:51 INFO] Starting Set [AERI set: name Z412, 6 scans, 0 angle, D16300 command]
[Ingest 23:29:51 INFO] Sending XML status message
[Status 23:29:51 INFO] Mirror angle: 0
[Mirror 23:29:52 INFO] rotating to position Z
[Status 23:29:52 INFO] .SET file for ACQ96 ready
[Ingest 23:29:53 INFO] Starting acquisition
[Status 23:29:54 INFO] reading housekeeping
[Status 23:30:11 INFO] acquire complete
[Status 23:30:12 INFO] writing housekeeping
[Sequencer 23:30:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:30:12 INFO] incremented Z scene to 412 completed views
[Sequencer 23:30:12 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:30:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:30:12 INFO] incremented to [AERI set: name H413, 6 scans, 60 angle, D22500 command] set
[sigmove 23:30:12 INFO] Z412.SIG(18)
[sigmove 23:30:12 DEBUG] transformed Z412Ma.SPC -> Z412MA.SPC
[sigmove 23:30:12 DEBUG] transformed Z412Mb.SPC -> Z412MB.SPC
[sigmove 23:30:12 DEBUG] transformed Z412Mc.SPC -> Z412MC.SPC
[sigmove 23:30:12 DEBUG] transformed Z412Md.SPC -> Z412MD.SPC
[sigmove 23:30:12 DEBUG] transformed Z412Me.SPC -> Z412ME.SPC
[sigmove 23:30:12 DEBUG] transformed Z412Mf.SPC -> Z412MF.SPC
[Status 23:30:12 INFO] data for Z412 transferred to science data processing
[Tidy 23:30:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:30:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:30:12 INFO] resetting WatchDogTimer
[Status 23:30:13 INFO] Starting Set [AERI set: name H413, 6 scans, 60 angle, D22500 command]
[Ingest 23:30:13 INFO] Sending XML status message
[Status 23:30:13 INFO] Mirror angle: 60
[Mirror 23:30:13 INFO] rotating to position H
[Status 23:30:14 INFO] .SET file for ACQ96 ready
[Ingest 23:30:15 INFO] Starting acquisition
[Status 23:30:15 INFO] reading housekeeping
[Status 23:30:33 INFO] acquire complete
[Status 23:30:35 INFO] writing housekeeping
[Sequencer 23:30:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:30:35 INFO] incremented H scene to 413 completed views
[Sequencer 23:30:35 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:30:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:30:35 INFO] incremented to [AERI set: name A413, 6 scans, 120 angle, D28300 command] set
[sigmove 23:30:35 INFO] H413.SIG(18)
[sigmove 23:30:35 DEBUG] transformed H413Ma.SPC -> H413MA.SPC
[sigmove 23:30:35 DEBUG] transformed H413Mb.SPC -> H413MB.SPC
[sigmove 23:30:35 DEBUG] transformed H413Mc.SPC -> H413MC.SPC
[sigmove 23:30:35 DEBUG] transformed H413Md.SPC -> H413MD.SPC
[sigmove 23:30:35 DEBUG] transformed H413Me.SPC -> H413ME.SPC
[sigmove 23:30:35 DEBUG] transformed H413Mf.SPC -> H413MF.SPC
[Status 23:30:35 INFO] data for H413 transferred to science data processing
[Tidy 23:30:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:30:35 INFO] A411.FIN(19),H411.FIN(19),S411.FIN(19),T411.FIN(19),U411.FIN(19),V411.FIN(19),W411.FIN(19),X411.FIN(19),Y411.FIN(19),Z411.FIN(19),A412.FIN(19),H412.FIN(19),S412.FIN(19),T412.FIN(19),U412.FIN(19),V412.FIN(19),W412.FIN(19),X412.FIN(19),Y412.FIN(19),Z412.FIN(19)
[sigmove 23:30:35 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:30:35 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:30:42 DEBUG] done zipping
[WatchDog 23:30:42 INFO] resetting WatchDogTimer
[Status 23:30:43 INFO] Starting Set [AERI set: name A413, 6 scans, 120 angle, D28300 command]
[Ingest 23:30:43 INFO] Sending XML status message
[Status 23:30:43 INFO] Mirror angle: 120
[Mirror 23:30:43 INFO] rotating to position A
[Status 23:30:45 INFO] .SET file for ACQ96 ready
[Ingest 23:30:45 INFO] Starting acquisition
[Status 23:30:46 INFO] reading housekeeping
[Status 23:31:04 INFO] acquire complete
[Status 23:31:05 INFO] writing housekeeping
[Sequencer 23:31:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:31:05 INFO] incremented A scene to 413 completed views
[Sequencer 23:31:05 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:31:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:31:05 INFO] incremented to [AERI set: name S413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:31:05 INFO] A413.SIG(18)
[sigmove 23:31:05 DEBUG] transformed A413Ma.SPC -> A413MA.SPC
[sigmove 23:31:05 DEBUG] transformed A413Mb.SPC -> A413MB.SPC
[sigmove 23:31:05 DEBUG] transformed A413Mc.SPC -> A413MC.SPC
[sigmove 23:31:05 DEBUG] transformed A413Md.SPC -> A413MD.SPC
[sigmove 23:31:05 DEBUG] transformed A413Me.SPC -> A413ME.SPC
[sigmove 23:31:05 DEBUG] transformed A413Mf.SPC -> A413MF.SPC
[Status 23:31:05 INFO] data for A413 transferred to science data processing
[Tidy 23:31:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:31:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:31:05 INFO] resetting WatchDogTimer
[Status 23:31:05 INFO] Starting Set [AERI set: name S413, 6 scans, 0 angle, D16300 command]
[Ingest 23:31:05 INFO] Sending XML status message
[Status 23:31:05 INFO] Mirror angle: 0
[Mirror 23:31:06 INFO] rotating to position S
[Status 23:31:07 INFO] .SET file for ACQ96 ready
[Ingest 23:31:08 INFO] Starting acquisition
[Status 23:31:09 INFO] reading housekeeping
[Status 23:31:26 INFO] acquire complete
[Status 23:31:28 INFO] writing housekeeping
[Sequencer 23:31:28 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:31:28 INFO] incremented S scene to 413 completed views
[Sequencer 23:31:28 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:31:28 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:31:28 INFO] incremented to [AERI set: name T413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:31:28 INFO] S413.SIG(18)
[sigmove 23:31:28 DEBUG] transformed S413Ma.SPC -> S413MA.SPC
[sigmove 23:31:28 DEBUG] transformed S413Mb.SPC -> S413MB.SPC
[sigmove 23:31:28 DEBUG] transformed S413Mc.SPC -> S413MC.SPC
[sigmove 23:31:28 DEBUG] transformed S413Md.SPC -> S413MD.SPC
[sigmove 23:31:28 DEBUG] transformed S413Me.SPC -> S413ME.SPC
[sigmove 23:31:28 DEBUG] transformed S413Mf.SPC -> S413MF.SPC
[Status 23:31:28 INFO] data for S413 transferred to science data processing
[Tidy 23:31:28 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:31:28 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:31:28 INFO] resetting WatchDogTimer
[Status 23:31:28 INFO] Starting Set [AERI set: name T413, 6 scans, 0 angle, D16300 command]
[Ingest 23:31:28 INFO] Sending XML status message
[Status 23:31:28 INFO] Mirror angle: 0
[Mirror 23:31:29 INFO] rotating to position T
[Status 23:31:29 INFO] .SET file for ACQ96 ready
[Ingest 23:31:30 INFO] Starting acquisition
[Status 23:31:30 INFO] reading housekeeping
[Status 23:31:47 INFO] acquire complete
[Status 23:31:49 INFO] writing housekeeping
[Sequencer 23:31:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:31:49 INFO] incremented T scene to 413 completed views
[Sequencer 23:31:49 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:31:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:31:49 INFO] incremented to [AERI set: name U413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:31:49 INFO] T413.SIG(18)
[sigmove 23:31:49 DEBUG] transformed T413Ma.SPC -> T413MA.SPC
[sigmove 23:31:49 DEBUG] transformed T413Mb.SPC -> T413MB.SPC
[sigmove 23:31:49 DEBUG] transformed T413Mc.SPC -> T413MC.SPC
[sigmove 23:31:49 DEBUG] transformed T413Md.SPC -> T413MD.SPC
[sigmove 23:31:49 DEBUG] transformed T413Me.SPC -> T413ME.SPC
[sigmove 23:31:49 DEBUG] transformed T413Mf.SPC -> T413MF.SPC
[Status 23:31:49 INFO] data for T413 transferred to science data processing
[Tidy 23:31:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:31:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:31:49 INFO] resetting WatchDogTimer
[Status 23:31:49 INFO] Starting Set [AERI set: name U413, 6 scans, 0 angle, D16300 command]
[Ingest 23:31:49 INFO] Sending XML status message
[Status 23:31:49 INFO] Mirror angle: 0
[Mirror 23:31:50 INFO] rotating to position U
[Status 23:31:50 INFO] .SET file for ACQ96 ready
[Ingest 23:31:51 INFO] Starting acquisition
[Status 23:31:51 INFO] reading housekeeping
[Status 23:32:09 INFO] acquire complete
[Status 23:32:10 INFO] writing housekeeping
[Sequencer 23:32:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:32:10 INFO] incremented U scene to 413 completed views
[Sequencer 23:32:10 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:32:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:32:10 INFO] incremented to [AERI set: name V413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:32:10 INFO] U413.SIG(18)
[sigmove 23:32:10 DEBUG] transformed U413Ma.SPC -> U413MA.SPC
[sigmove 23:32:10 DEBUG] transformed U413Mb.SPC -> U413MB.SPC
[sigmove 23:32:10 DEBUG] transformed U413Mc.SPC -> U413MC.SPC
[sigmove 23:32:10 DEBUG] transformed U413Md.SPC -> U413MD.SPC
[sigmove 23:32:10 DEBUG] transformed U413Me.SPC -> U413ME.SPC
[sigmove 23:32:10 DEBUG] transformed U413Mf.SPC -> U413MF.SPC
[Status 23:32:10 INFO] data for U413 transferred to science data processing
[Tidy 23:32:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:32:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:32:10 INFO] resetting WatchDogTimer
[Status 23:32:11 INFO] Starting Set [AERI set: name V413, 6 scans, 0 angle, D16300 command]
[Ingest 23:32:11 INFO] Sending XML status message
[Status 23:32:11 INFO] Mirror angle: 0
[Mirror 23:32:11 INFO] rotating to position V
[Status 23:32:12 INFO] .SET file for ACQ96 ready
[Ingest 23:32:12 INFO] Starting acquisition
[Status 23:32:13 INFO] reading housekeeping
[Status 23:32:31 INFO] acquire complete
[Status 23:32:32 INFO] writing housekeeping
[Sequencer 23:32:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:32:32 INFO] incremented V scene to 413 completed views
[Sequencer 23:32:32 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:32:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:32:32 INFO] incremented to [AERI set: name W413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:32:32 INFO] V413.SIG(18)
[sigmove 23:32:32 DEBUG] transformed V413Ma.SPC -> V413MA.SPC
[sigmove 23:32:32 DEBUG] transformed V413Mb.SPC -> V413MB.SPC
[sigmove 23:32:32 DEBUG] transformed V413Mc.SPC -> V413MC.SPC
[sigmove 23:32:32 DEBUG] transformed V413Md.SPC -> V413MD.SPC
[sigmove 23:32:32 DEBUG] transformed V413Me.SPC -> V413ME.SPC
[sigmove 23:32:32 DEBUG] transformed V413Mf.SPC -> V413MF.SPC
[Status 23:32:32 INFO] data for V413 transferred to science data processing
[Tidy 23:32:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:32:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:32:32 INFO] resetting WatchDogTimer
[Status 23:32:33 INFO] Starting Set [AERI set: name W413, 6 scans, 0 angle, D16300 command]
[Ingest 23:32:33 INFO] Sending XML status message
[Status 23:32:33 INFO] Mirror angle: 0
[Mirror 23:32:33 INFO] rotating to position W
[Status 23:32:34 INFO] .SET file for ACQ96 ready
[Ingest 23:32:34 INFO] Starting acquisition
[Status 23:32:35 INFO] reading housekeeping
[Status 23:32:52 INFO] acquire complete
[Status 23:32:54 INFO] writing housekeeping
[Sequencer 23:32:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:32:54 INFO] incremented W scene to 413 completed views
[Sequencer 23:32:54 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:32:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:32:54 INFO] incremented to [AERI set: name X413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:32:54 INFO] W413.SIG(18)
[sigmove 23:32:54 DEBUG] transformed W413Ma.SPC -> W413MA.SPC
[sigmove 23:32:54 DEBUG] transformed W413Mb.SPC -> W413MB.SPC
[sigmove 23:32:54 DEBUG] transformed W413Mc.SPC -> W413MC.SPC
[sigmove 23:32:54 DEBUG] transformed W413Md.SPC -> W413MD.SPC
[sigmove 23:32:54 DEBUG] transformed W413Me.SPC -> W413ME.SPC
[sigmove 23:32:54 DEBUG] transformed W413Mf.SPC -> W413MF.SPC
[Status 23:32:54 INFO] data for W413 transferred to science data processing
[Tidy 23:32:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:32:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:32:54 INFO] resetting WatchDogTimer
[Status 23:32:54 INFO] Starting Set [AERI set: name X413, 6 scans, 0 angle, D16300 command]
[Ingest 23:32:54 INFO] Sending XML status message
[Status 23:32:54 INFO] Mirror angle: 0
[Mirror 23:32:55 INFO] rotating to position X
[Status 23:32:55 INFO] .SET file for ACQ96 ready
[Ingest 23:32:56 INFO] Starting acquisition
[Status 23:32:56 INFO] reading housekeeping
[Status 23:33:14 INFO] acquire complete
[Status 23:33:15 INFO] writing housekeeping
[Sequencer 23:33:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:33:15 INFO] incremented X scene to 413 completed views
[Sequencer 23:33:15 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:33:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:33:15 INFO] incremented to [AERI set: name Y413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:33:15 INFO] X413.SIG(18)
[sigmove 23:33:15 DEBUG] transformed X413Ma.SPC -> X413MA.SPC
[sigmove 23:33:15 DEBUG] transformed X413Mb.SPC -> X413MB.SPC
[sigmove 23:33:15 DEBUG] transformed X413Mc.SPC -> X413MC.SPC
[sigmove 23:33:15 DEBUG] transformed X413Md.SPC -> X413MD.SPC
[sigmove 23:33:15 DEBUG] transformed X413Me.SPC -> X413ME.SPC
[sigmove 23:33:15 DEBUG] transformed X413Mf.SPC -> X413MF.SPC
[Status 23:33:15 INFO] data for X413 transferred to science data processing
[Tidy 23:33:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:33:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:33:15 INFO] resetting WatchDogTimer
[Status 23:33:15 INFO] Starting Set [AERI set: name Y413, 6 scans, 0 angle, D16300 command]
[Ingest 23:33:15 INFO] Sending XML status message
[Status 23:33:15 INFO] Mirror angle: 0
[Mirror 23:33:16 INFO] rotating to position Y
[Status 23:33:17 INFO] .SET file for ACQ96 ready
[Ingest 23:33:17 INFO] Starting acquisition
[Status 23:33:18 INFO] reading housekeeping
[Status 23:33:35 INFO] acquire complete
[Status 23:33:36 INFO] writing housekeeping
[Sequencer 23:33:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:33:36 INFO] incremented Y scene to 413 completed views
[Sequencer 23:33:36 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:33:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:33:36 INFO] incremented to [AERI set: name Z413, 6 scans, 0 angle, D16300 command] set
[sigmove 23:33:36 INFO] Y413.SIG(18)
[sigmove 23:33:36 DEBUG] transformed Y413Ma.SPC -> Y413MA.SPC
[sigmove 23:33:36 DEBUG] transformed Y413Mb.SPC -> Y413MB.SPC
[sigmove 23:33:36 DEBUG] transformed Y413Mc.SPC -> Y413MC.SPC
[sigmove 23:33:36 DEBUG] transformed Y413Md.SPC -> Y413MD.SPC
[sigmove 23:33:36 DEBUG] transformed Y413Me.SPC -> Y413ME.SPC
[sigmove 23:33:36 DEBUG] transformed Y413Mf.SPC -> Y413MF.SPC
[Status 23:33:36 INFO] data for Y413 transferred to science data processing
[Tidy 23:33:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:33:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:33:36 INFO] resetting WatchDogTimer
[Status 23:33:37 INFO] Starting Set [AERI set: name Z413, 6 scans, 0 angle, D16300 command]
[Ingest 23:33:37 INFO] Sending XML status message
[Status 23:33:37 INFO] Mirror angle: 0
[Mirror 23:33:37 INFO] rotating to position Z
[Status 23:33:38 INFO] .SET file for ACQ96 ready
[Ingest 23:33:38 INFO] Starting acquisition
[Status 23:33:39 INFO] reading housekeeping
[Status 23:33:56 INFO] acquire complete
[Status 23:33:57 INFO] writing housekeeping
[Sequencer 23:33:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:33:57 INFO] incremented Z scene to 413 completed views
[Sequencer 23:33:57 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:33:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:33:58 INFO] incremented to [AERI set: name A414, 6 scans, 120 angle, D28300 command] set
[sigmove 23:33:58 INFO] Z413.SIG(18)
[sigmove 23:33:58 DEBUG] transformed Z413Ma.SPC -> Z413MA.SPC
[sigmove 23:33:58 DEBUG] transformed Z413Mb.SPC -> Z413MB.SPC
[sigmove 23:33:58 DEBUG] transformed Z413Mc.SPC -> Z413MC.SPC
[sigmove 23:33:58 DEBUG] transformed Z413Md.SPC -> Z413MD.SPC
[sigmove 23:33:58 DEBUG] transformed Z413Me.SPC -> Z413ME.SPC
[sigmove 23:33:58 DEBUG] transformed Z413Mf.SPC -> Z413MF.SPC
[Status 23:33:58 INFO] data for Z413 transferred to science data processing
[Tidy 23:33:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:33:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:33:58 INFO] resetting WatchDogTimer
[Status 23:33:58 INFO] Starting Set [AERI set: name A414, 6 scans, 120 angle, D28300 command]
[Ingest 23:33:58 INFO] Sending XML status message
[Status 23:33:58 INFO] Mirror angle: 120
[Mirror 23:33:59 INFO] rotating to position A
[Status 23:34:00 INFO] .SET file for ACQ96 ready
[Ingest 23:34:01 INFO] Starting acquisition
[Status 23:34:01 INFO] reading housekeeping
[Status 23:34:19 INFO] acquire complete
[Status 23:34:20 INFO] writing housekeeping
[Sequencer 23:34:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:34:20 INFO] incremented A scene to 414 completed views
[Sequencer 23:34:20 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:34:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:34:20 INFO] incremented to [AERI set: name H414, 6 scans, 60 angle, D22500 command] set
[sigmove 23:34:20 INFO] A414.SIG(18)
[sigmove 23:34:20 DEBUG] transformed A414Ma.SPC -> A414MA.SPC
[sigmove 23:34:20 DEBUG] transformed A414Mb.SPC -> A414MB.SPC
[sigmove 23:34:20 DEBUG] transformed A414Mc.SPC -> A414MC.SPC
[sigmove 23:34:20 DEBUG] transformed A414Md.SPC -> A414MD.SPC
[sigmove 23:34:20 DEBUG] transformed A414Me.SPC -> A414ME.SPC
[sigmove 23:34:20 DEBUG] transformed A414Mf.SPC -> A414MF.SPC
[Status 23:34:20 INFO] data for A414 transferred to science data processing
[Tidy 23:34:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:34:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:34:20 INFO] resetting WatchDogTimer
[Status 23:34:20 INFO] Starting Set [AERI set: name H414, 6 scans, 60 angle, D22500 command]
[Ingest 23:34:20 INFO] Sending XML status message
[Status 23:34:20 INFO] Mirror angle: 60
[Mirror 23:34:21 INFO] rotating to position H
[Status 23:34:22 INFO] .SET file for ACQ96 ready
[Ingest 23:34:23 INFO] Starting acquisition
[Status 23:34:23 INFO] reading housekeeping
[Status 23:34:41 INFO] acquire complete
[Status 23:34:42 INFO] writing housekeeping
[Sequencer 23:34:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:34:42 INFO] incremented H scene to 414 completed views
[Sequencer 23:34:42 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:34:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:34:42 INFO] incremented to [AERI set: name S414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:34:42 INFO] H414.SIG(18)
[sigmove 23:34:42 DEBUG] transformed H414Ma.SPC -> H414MA.SPC
[sigmove 23:34:42 DEBUG] transformed H414Mb.SPC -> H414MB.SPC
[sigmove 23:34:42 DEBUG] transformed H414Mc.SPC -> H414MC.SPC
[sigmove 23:34:42 DEBUG] transformed H414Md.SPC -> H414MD.SPC
[sigmove 23:34:42 DEBUG] transformed H414Me.SPC -> H414ME.SPC
[sigmove 23:34:42 DEBUG] transformed H414Mf.SPC -> H414MF.SPC
[Status 23:34:42 INFO] data for H414 transferred to science data processing
[Tidy 23:34:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:34:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:34:42 INFO] resetting WatchDogTimer
[Status 23:34:43 INFO] Starting Set [AERI set: name S414, 6 scans, 0 angle, D16300 command]
[Ingest 23:34:43 INFO] Sending XML status message
[Status 23:34:43 INFO] Mirror angle: 0
[Mirror 23:34:44 INFO] rotating to position S
[Status 23:34:45 INFO] .SET file for ACQ96 ready
[Ingest 23:34:45 INFO] Starting acquisition
[Status 23:34:46 INFO] reading housekeeping
[Status 23:35:04 INFO] acquire complete
[Status 23:35:05 INFO] writing housekeeping
[Sequencer 23:35:05 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:35:05 INFO] incremented S scene to 414 completed views
[Sequencer 23:35:05 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:35:05 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:35:05 INFO] incremented to [AERI set: name T414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:35:05 INFO] S414.SIG(18)
[sigmove 23:35:05 DEBUG] transformed S414Ma.SPC -> S414MA.SPC
[sigmove 23:35:05 DEBUG] transformed S414Mb.SPC -> S414MB.SPC
[sigmove 23:35:05 DEBUG] transformed S414Mc.SPC -> S414MC.SPC
[sigmove 23:35:05 DEBUG] transformed S414Md.SPC -> S414MD.SPC
[sigmove 23:35:05 DEBUG] transformed S414Me.SPC -> S414ME.SPC
[sigmove 23:35:05 DEBUG] transformed S414Mf.SPC -> S414MF.SPC
[Status 23:35:05 INFO] data for S414 transferred to science data processing
[Tidy 23:35:05 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:35:05 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:35:05 INFO] resetting WatchDogTimer
[Status 23:35:05 INFO] Starting Set [AERI set: name T414, 6 scans, 0 angle, D16300 command]
[Ingest 23:35:05 INFO] Sending XML status message
[Status 23:35:05 INFO] Mirror angle: 0
[Mirror 23:35:06 INFO] rotating to position T
[Status 23:35:06 INFO] .SET file for ACQ96 ready
[Ingest 23:35:07 INFO] Starting acquisition
[Status 23:35:08 INFO] reading housekeeping
[Status 23:35:25 INFO] acquire complete
[Status 23:35:26 INFO] writing housekeeping
[Sequencer 23:35:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:35:26 INFO] incremented T scene to 414 completed views
[Sequencer 23:35:26 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:35:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:35:26 INFO] incremented to [AERI set: name U414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:35:26 INFO] T414.SIG(18)
[sigmove 23:35:26 DEBUG] transformed T414Ma.SPC -> T414MA.SPC
[sigmove 23:35:26 DEBUG] transformed T414Mb.SPC -> T414MB.SPC
[sigmove 23:35:26 DEBUG] transformed T414Mc.SPC -> T414MC.SPC
[sigmove 23:35:26 DEBUG] transformed T414Md.SPC -> T414MD.SPC
[sigmove 23:35:26 DEBUG] transformed T414Me.SPC -> T414ME.SPC
[sigmove 23:35:26 DEBUG] transformed T414Mf.SPC -> T414MF.SPC
[Status 23:35:26 INFO] data for T414 transferred to science data processing
[Tidy 23:35:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:35:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:35:26 INFO] resetting WatchDogTimer
[Status 23:35:27 INFO] Starting Set [AERI set: name U414, 6 scans, 0 angle, D16300 command]
[Ingest 23:35:27 INFO] Sending XML status message
[Status 23:35:27 INFO] Mirror angle: 0
[Mirror 23:35:27 INFO] rotating to position U
[Status 23:35:28 INFO] .SET file for ACQ96 ready
[Ingest 23:35:28 INFO] Starting acquisition
[Status 23:35:29 INFO] reading housekeeping
[Status 23:35:46 INFO] acquire complete
[Status 23:35:47 INFO] writing housekeeping
[Sequencer 23:35:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:35:47 INFO] incremented U scene to 414 completed views
[Sequencer 23:35:47 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:35:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:35:47 INFO] incremented to [AERI set: name V414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:35:47 INFO] U414.SIG(18)
[sigmove 23:35:47 DEBUG] transformed U414Ma.SPC -> U414MA.SPC
[sigmove 23:35:47 DEBUG] transformed U414Mb.SPC -> U414MB.SPC
[sigmove 23:35:47 DEBUG] transformed U414Mc.SPC -> U414MC.SPC
[sigmove 23:35:47 DEBUG] transformed U414Md.SPC -> U414MD.SPC
[sigmove 23:35:47 DEBUG] transformed U414Me.SPC -> U414ME.SPC
[sigmove 23:35:47 DEBUG] transformed U414Mf.SPC -> U414MF.SPC
[Status 23:35:47 INFO] data for U414 transferred to science data processing
[Tidy 23:35:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:35:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:35:47 INFO] resetting WatchDogTimer
[Status 23:35:48 INFO] Starting Set [AERI set: name V414, 6 scans, 0 angle, D16300 command]
[Ingest 23:35:48 INFO] Sending XML status message
[Status 23:35:48 INFO] Mirror angle: 0
[Mirror 23:35:48 INFO] rotating to position V
[Status 23:35:49 INFO] .SET file for ACQ96 ready
[Ingest 23:35:50 INFO] Starting acquisition
[Status 23:35:50 INFO] reading housekeeping
[Status 23:36:07 INFO] acquire complete
[Status 23:36:09 INFO] writing housekeeping
[Sequencer 23:36:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:36:09 INFO] incremented V scene to 414 completed views
[Sequencer 23:36:09 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:36:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:36:09 INFO] incremented to [AERI set: name W414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:36:09 INFO] V414.SIG(18)
[sigmove 23:36:09 DEBUG] transformed V414Ma.SPC -> V414MA.SPC
[sigmove 23:36:09 DEBUG] transformed V414Mb.SPC -> V414MB.SPC
[sigmove 23:36:09 DEBUG] transformed V414Mc.SPC -> V414MC.SPC
[sigmove 23:36:09 DEBUG] transformed V414Md.SPC -> V414MD.SPC
[sigmove 23:36:09 DEBUG] transformed V414Me.SPC -> V414ME.SPC
[sigmove 23:36:09 DEBUG] transformed V414Mf.SPC -> V414MF.SPC
[Status 23:36:09 INFO] data for V414 transferred to science data processing
[Tidy 23:36:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:36:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:36:09 INFO] resetting WatchDogTimer
[Status 23:36:09 INFO] Starting Set [AERI set: name W414, 6 scans, 0 angle, D16300 command]
[Ingest 23:36:09 INFO] Sending XML status message
[Status 23:36:09 INFO] Mirror angle: 0
[Mirror 23:36:10 INFO] rotating to position W
[Status 23:36:10 INFO] .SET file for ACQ96 ready
[Ingest 23:36:11 INFO] Starting acquisition
[Status 23:36:11 INFO] reading housekeeping
[Status 23:36:29 INFO] acquire complete
[Status 23:36:30 INFO] writing housekeeping
[Sequencer 23:36:30 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:36:30 INFO] incremented W scene to 414 completed views
[Sequencer 23:36:30 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:36:30 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:36:30 INFO] incremented to [AERI set: name X414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:36:30 INFO] W414.SIG(18)
[sigmove 23:36:30 DEBUG] transformed W414Ma.SPC -> W414MA.SPC
[sigmove 23:36:30 DEBUG] transformed W414Mb.SPC -> W414MB.SPC
[sigmove 23:36:30 DEBUG] transformed W414Mc.SPC -> W414MC.SPC
[sigmove 23:36:30 DEBUG] transformed W414Md.SPC -> W414MD.SPC
[sigmove 23:36:30 DEBUG] transformed W414Me.SPC -> W414ME.SPC
[sigmove 23:36:30 DEBUG] transformed W414Mf.SPC -> W414MF.SPC
[Status 23:36:30 INFO] data for W414 transferred to science data processing
[Tidy 23:36:30 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:36:30 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:36:30 INFO] resetting WatchDogTimer
[Status 23:36:31 INFO] Starting Set [AERI set: name X414, 6 scans, 0 angle, D16300 command]
[Ingest 23:36:31 INFO] Sending XML status message
[Status 23:36:31 INFO] Mirror angle: 0
[Mirror 23:36:31 INFO] rotating to position X
[Status 23:36:32 INFO] .SET file for ACQ96 ready
[Ingest 23:36:32 INFO] Starting acquisition
[Status 23:36:33 INFO] reading housekeeping
[Status 23:36:50 INFO] acquire complete
[Status 23:36:51 INFO] writing housekeeping
[Sequencer 23:36:51 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:36:51 INFO] incremented X scene to 414 completed views
[Sequencer 23:36:51 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:36:51 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:36:51 INFO] incremented to [AERI set: name Y414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:36:51 INFO] X414.SIG(18)
[sigmove 23:36:51 DEBUG] transformed X414Ma.SPC -> X414MA.SPC
[sigmove 23:36:51 DEBUG] transformed X414Mb.SPC -> X414MB.SPC
[sigmove 23:36:51 DEBUG] transformed X414Mc.SPC -> X414MC.SPC
[sigmove 23:36:51 DEBUG] transformed X414Md.SPC -> X414MD.SPC
[sigmove 23:36:51 DEBUG] transformed X414Me.SPC -> X414ME.SPC
[sigmove 23:36:51 DEBUG] transformed X414Mf.SPC -> X414MF.SPC
[Status 23:36:51 INFO] data for X414 transferred to science data processing
[Tidy 23:36:51 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:36:51 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:36:51 INFO] resetting WatchDogTimer
[Status 23:36:52 INFO] Starting Set [AERI set: name Y414, 6 scans, 0 angle, D16300 command]
[Ingest 23:36:52 INFO] Sending XML status message
[Status 23:36:52 INFO] Mirror angle: 0
[Mirror 23:36:52 INFO] rotating to position Y
[Status 23:36:53 INFO] .SET file for ACQ96 ready
[Ingest 23:36:53 INFO] Starting acquisition
[Status 23:36:54 INFO] reading housekeeping
[Status 23:37:11 INFO] acquire complete
[Status 23:37:13 INFO] writing housekeeping
[Sequencer 23:37:13 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:37:13 INFO] incremented Y scene to 414 completed views
[Sequencer 23:37:13 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:37:13 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:37:13 INFO] incremented to [AERI set: name Z414, 6 scans, 0 angle, D16300 command] set
[sigmove 23:37:13 INFO] Y414.SIG(18)
[sigmove 23:37:13 DEBUG] transformed Y414Ma.SPC -> Y414MA.SPC
[sigmove 23:37:13 DEBUG] transformed Y414Mb.SPC -> Y414MB.SPC
[sigmove 23:37:13 DEBUG] transformed Y414Mc.SPC -> Y414MC.SPC
[sigmove 23:37:13 DEBUG] transformed Y414Md.SPC -> Y414MD.SPC
[sigmove 23:37:13 DEBUG] transformed Y414Me.SPC -> Y414ME.SPC
[sigmove 23:37:13 DEBUG] transformed Y414Mf.SPC -> Y414MF.SPC
[Status 23:37:13 INFO] data for Y414 transferred to science data processing
[Tidy 23:37:13 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:37:13 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:37:13 INFO] resetting WatchDogTimer
[Status 23:37:13 INFO] Starting Set [AERI set: name Z414, 6 scans, 0 angle, D16300 command]
[Ingest 23:37:13 INFO] Sending XML status message
[Status 23:37:13 INFO] Mirror angle: 0
[Mirror 23:37:14 INFO] rotating to position Z
[Status 23:37:14 INFO] .SET file for ACQ96 ready
[Ingest 23:37:15 INFO] Starting acquisition
[Status 23:37:16 INFO] reading housekeeping
[Status 23:37:33 INFO] acquire complete
[Status 23:37:34 INFO] writing housekeeping
[Sequencer 23:37:34 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:37:34 INFO] incremented Z scene to 414 completed views
[Sequencer 23:37:34 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:37:34 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:37:34 INFO] incremented to [AERI set: name H415, 6 scans, 60 angle, D22500 command] set
[sigmove 23:37:34 INFO] Z414.SIG(18)
[sigmove 23:37:34 DEBUG] transformed Z414Ma.SPC -> Z414MA.SPC
[sigmove 23:37:34 DEBUG] transformed Z414Mb.SPC -> Z414MB.SPC
[sigmove 23:37:34 DEBUG] transformed Z414Mc.SPC -> Z414MC.SPC
[sigmove 23:37:34 DEBUG] transformed Z414Md.SPC -> Z414MD.SPC
[sigmove 23:37:34 DEBUG] transformed Z414Me.SPC -> Z414ME.SPC
[sigmove 23:37:34 DEBUG] transformed Z414Mf.SPC -> Z414MF.SPC
[Status 23:37:34 INFO] data for Z414 transferred to science data processing
[Tidy 23:37:34 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:37:34 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:37:34 INFO] resetting WatchDogTimer
[Status 23:37:34 INFO] Starting Set [AERI set: name H415, 6 scans, 60 angle, D22500 command]
[Ingest 23:37:34 INFO] Sending XML status message
[Status 23:37:34 INFO] Mirror angle: 60
[Mirror 23:37:35 INFO] rotating to position H
[Status 23:37:36 INFO] .SET file for ACQ96 ready
[Ingest 23:37:37 INFO] Starting acquisition
[Status 23:37:37 INFO] reading housekeeping
[Status 23:37:55 INFO] acquire complete
[Status 23:37:56 INFO] writing housekeeping
[Sequencer 23:37:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:37:56 INFO] incremented H scene to 415 completed views
[Sequencer 23:37:56 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:37:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:37:56 INFO] incremented to [AERI set: name A415, 6 scans, 120 angle, D28300 command] set
[sigmove 23:37:56 INFO] H415.SIG(18)
[sigmove 23:37:56 DEBUG] transformed H415Ma.SPC -> H415MA.SPC
[sigmove 23:37:56 DEBUG] transformed H415Mb.SPC -> H415MB.SPC
[sigmove 23:37:56 DEBUG] transformed H415Mc.SPC -> H415MC.SPC
[sigmove 23:37:56 DEBUG] transformed H415Md.SPC -> H415MD.SPC
[sigmove 23:37:56 DEBUG] transformed H415Me.SPC -> H415ME.SPC
[sigmove 23:37:56 DEBUG] transformed H415Mf.SPC -> H415MF.SPC
[Status 23:37:56 INFO] data for H415 transferred to science data processing
[Tidy 23:37:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:37:56 INFO] A413.FIN(19),H413.FIN(19),S413.FIN(19),T413.FIN(19),U413.FIN(19),V413.FIN(19),W413.FIN(19),X413.FIN(19),Y413.FIN(19),Z413.FIN(19),A414.FIN(19),H414.FIN(19),S414.FIN(19),T414.FIN(19),U414.FIN(19),V414.FIN(19),W414.FIN(19),X414.FIN(19),Y414.FIN(19),Z414.FIN(19)
[sigmove 23:37:56 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:37:56 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:38:04 DEBUG] done zipping
[WatchDog 23:38:04 INFO] resetting WatchDogTimer
[Status 23:38:05 INFO] Starting Set [AERI set: name A415, 6 scans, 120 angle, D28300 command]
[Ingest 23:38:05 INFO] Sending XML status message
[Status 23:38:05 INFO] Mirror angle: 120
[Mirror 23:38:05 INFO] rotating to position A
[Status 23:38:06 INFO] .SET file for ACQ96 ready
[Ingest 23:38:07 INFO] Starting acquisition
[Status 23:38:07 INFO] reading housekeeping
[Status 23:38:25 INFO] acquire complete
[Status 23:38:27 INFO] writing housekeeping
[Sequencer 23:38:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:38:27 INFO] incremented A scene to 415 completed views
[Sequencer 23:38:27 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:38:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:38:27 INFO] incremented to [AERI set: name S415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:38:27 INFO] A415.SIG(18)
[sigmove 23:38:27 DEBUG] transformed A415Ma.SPC -> A415MA.SPC
[sigmove 23:38:27 DEBUG] transformed A415Mb.SPC -> A415MB.SPC
[sigmove 23:38:27 DEBUG] transformed A415Mc.SPC -> A415MC.SPC
[sigmove 23:38:27 DEBUG] transformed A415Md.SPC -> A415MD.SPC
[sigmove 23:38:27 DEBUG] transformed A415Me.SPC -> A415ME.SPC
[sigmove 23:38:27 DEBUG] transformed A415Mf.SPC -> A415MF.SPC
[Status 23:38:27 INFO] data for A415 transferred to science data processing
[Tidy 23:38:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:38:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:38:27 INFO] resetting WatchDogTimer
[Status 23:38:27 INFO] Starting Set [AERI set: name S415, 6 scans, 0 angle, D16300 command]
[Ingest 23:38:27 INFO] Sending XML status message
[Status 23:38:27 INFO] Mirror angle: 0
[Mirror 23:38:28 INFO] rotating to position S
[Status 23:38:29 INFO] .SET file for ACQ96 ready
[Ingest 23:38:30 INFO] Starting acquisition
[Status 23:38:30 INFO] reading housekeeping
[Status 23:38:48 INFO] acquire complete
[Status 23:38:49 INFO] writing housekeeping
[Sequencer 23:38:49 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:38:49 INFO] incremented S scene to 415 completed views
[Sequencer 23:38:49 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:38:49 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:38:49 INFO] incremented to [AERI set: name T415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:38:49 INFO] S415.SIG(18)
[sigmove 23:38:49 DEBUG] transformed S415Ma.SPC -> S415MA.SPC
[sigmove 23:38:49 DEBUG] transformed S415Mb.SPC -> S415MB.SPC
[sigmove 23:38:49 DEBUG] transformed S415Mc.SPC -> S415MC.SPC
[sigmove 23:38:49 DEBUG] transformed S415Md.SPC -> S415MD.SPC
[sigmove 23:38:49 DEBUG] transformed S415Me.SPC -> S415ME.SPC
[sigmove 23:38:49 DEBUG] transformed S415Mf.SPC -> S415MF.SPC
[Status 23:38:49 INFO] data for S415 transferred to science data processing
[Tidy 23:38:49 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:38:49 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:38:49 INFO] resetting WatchDogTimer
[Status 23:38:50 INFO] Starting Set [AERI set: name T415, 6 scans, 0 angle, D16300 command]
[Ingest 23:38:50 INFO] Sending XML status message
[Status 23:38:50 INFO] Mirror angle: 0
[Mirror 23:38:50 INFO] rotating to position T
[Status 23:38:51 INFO] .SET file for ACQ96 ready
[Ingest 23:38:51 INFO] Starting acquisition
[Status 23:38:52 INFO] reading housekeeping
[Status 23:39:09 INFO] acquire complete
[Status 23:39:10 INFO] writing housekeeping
[Sequencer 23:39:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:39:10 INFO] incremented T scene to 415 completed views
[Sequencer 23:39:10 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:39:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:39:10 INFO] incremented to [AERI set: name U415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:39:10 INFO] T415.SIG(18)
[sigmove 23:39:10 DEBUG] transformed T415Ma.SPC -> T415MA.SPC
[sigmove 23:39:10 DEBUG] transformed T415Mb.SPC -> T415MB.SPC
[sigmove 23:39:10 DEBUG] transformed T415Mc.SPC -> T415MC.SPC
[sigmove 23:39:10 DEBUG] transformed T415Md.SPC -> T415MD.SPC
[sigmove 23:39:10 DEBUG] transformed T415Me.SPC -> T415ME.SPC
[sigmove 23:39:10 DEBUG] transformed T415Mf.SPC -> T415MF.SPC
[Status 23:39:10 INFO] data for T415 transferred to science data processing
[Tidy 23:39:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:39:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:39:10 INFO] resetting WatchDogTimer
[Status 23:39:11 INFO] Starting Set [AERI set: name U415, 6 scans, 0 angle, D16300 command]
[Ingest 23:39:11 INFO] Sending XML status message
[Status 23:39:11 INFO] Mirror angle: 0
[Mirror 23:39:11 INFO] rotating to position U
[Status 23:39:12 INFO] .SET file for ACQ96 ready
[Ingest 23:39:12 INFO] Starting acquisition
[Status 23:39:13 INFO] reading housekeeping
[Status 23:39:30 INFO] acquire complete
[Status 23:39:32 INFO] writing housekeeping
[Sequencer 23:39:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:39:32 INFO] incremented U scene to 415 completed views
[Sequencer 23:39:32 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:39:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:39:32 INFO] incremented to [AERI set: name V415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:39:32 INFO] U415.SIG(18)
[sigmove 23:39:32 DEBUG] transformed U415Ma.SPC -> U415MA.SPC
[sigmove 23:39:32 DEBUG] transformed U415Mb.SPC -> U415MB.SPC
[sigmove 23:39:32 DEBUG] transformed U415Mc.SPC -> U415MC.SPC
[sigmove 23:39:32 DEBUG] transformed U415Md.SPC -> U415MD.SPC
[sigmove 23:39:32 DEBUG] transformed U415Me.SPC -> U415ME.SPC
[sigmove 23:39:32 DEBUG] transformed U415Mf.SPC -> U415MF.SPC
[Status 23:39:32 INFO] data for U415 transferred to science data processing
[Tidy 23:39:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:39:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:39:32 INFO] resetting WatchDogTimer
[Status 23:39:32 INFO] Starting Set [AERI set: name V415, 6 scans, 0 angle, D16300 command]
[Ingest 23:39:32 INFO] Sending XML status message
[Status 23:39:32 INFO] Mirror angle: 0
[Mirror 23:39:33 INFO] rotating to position V
[Status 23:39:34 INFO] .SET file for ACQ96 ready
[Ingest 23:39:34 INFO] Starting acquisition
[Status 23:39:35 INFO] reading housekeeping
[Status 23:39:53 INFO] acquire complete
[Status 23:39:54 INFO] writing housekeeping
[Sequencer 23:39:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:39:54 INFO] incremented V scene to 415 completed views
[Sequencer 23:39:54 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:39:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:39:54 INFO] incremented to [AERI set: name W415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:39:54 INFO] V415.SIG(18)
[sigmove 23:39:54 DEBUG] transformed V415Ma.SPC -> V415MA.SPC
[sigmove 23:39:54 DEBUG] transformed V415Mb.SPC -> V415MB.SPC
[sigmove 23:39:54 DEBUG] transformed V415Mc.SPC -> V415MC.SPC
[sigmove 23:39:54 DEBUG] transformed V415Md.SPC -> V415MD.SPC
[sigmove 23:39:54 DEBUG] transformed V415Me.SPC -> V415ME.SPC
[sigmove 23:39:54 DEBUG] transformed V415Mf.SPC -> V415MF.SPC
[Status 23:39:54 INFO] data for V415 transferred to science data processing
[Tidy 23:39:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:39:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:39:54 INFO] resetting WatchDogTimer
[Status 23:39:55 INFO] Starting Set [AERI set: name W415, 6 scans, 0 angle, D16300 command]
[Ingest 23:39:55 INFO] Sending XML status message
[Status 23:39:55 INFO] Mirror angle: 0
[Mirror 23:39:55 INFO] rotating to position W
[Status 23:39:56 INFO] .SET file for ACQ96 ready
[Ingest 23:39:56 INFO] Starting acquisition
[Status 23:39:57 INFO] reading housekeeping
[Status 23:40:14 INFO] acquire complete
[Status 23:40:15 INFO] writing housekeeping
[Sequencer 23:40:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:40:15 INFO] incremented W scene to 415 completed views
[Sequencer 23:40:15 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:40:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:40:15 INFO] incremented to [AERI set: name X415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:40:15 INFO] W415.SIG(18)
[sigmove 23:40:15 DEBUG] transformed W415Ma.SPC -> W415MA.SPC
[sigmove 23:40:15 DEBUG] transformed W415Mb.SPC -> W415MB.SPC
[sigmove 23:40:15 DEBUG] transformed W415Mc.SPC -> W415MC.SPC
[sigmove 23:40:15 DEBUG] transformed W415Md.SPC -> W415MD.SPC
[sigmove 23:40:15 DEBUG] transformed W415Me.SPC -> W415ME.SPC
[sigmove 23:40:15 DEBUG] transformed W415Mf.SPC -> W415MF.SPC
[Status 23:40:15 INFO] data for W415 transferred to science data processing
[Tidy 23:40:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:40:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:40:15 INFO] resetting WatchDogTimer
[Status 23:40:16 INFO] Starting Set [AERI set: name X415, 6 scans, 0 angle, D16300 command]
[Ingest 23:40:16 INFO] Sending XML status message
[Status 23:40:16 INFO] Mirror angle: 0
[Mirror 23:40:16 INFO] rotating to position X
[Status 23:40:17 INFO] .SET file for ACQ96 ready
[Ingest 23:40:17 INFO] Starting acquisition
[Status 23:40:18 INFO] reading housekeeping
[Status 23:40:35 INFO] acquire complete
[Status 23:40:37 INFO] writing housekeeping
[Sequencer 23:40:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:40:37 INFO] incremented X scene to 415 completed views
[Sequencer 23:40:37 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:40:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:40:37 INFO] incremented to [AERI set: name Y415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:40:37 INFO] X415.SIG(18)
[sigmove 23:40:37 DEBUG] transformed X415Ma.SPC -> X415MA.SPC
[sigmove 23:40:37 DEBUG] transformed X415Mb.SPC -> X415MB.SPC
[sigmove 23:40:37 DEBUG] transformed X415Mc.SPC -> X415MC.SPC
[sigmove 23:40:37 DEBUG] transformed X415Md.SPC -> X415MD.SPC
[sigmove 23:40:37 DEBUG] transformed X415Me.SPC -> X415ME.SPC
[sigmove 23:40:37 DEBUG] transformed X415Mf.SPC -> X415MF.SPC
[Status 23:40:37 INFO] data for X415 transferred to science data processing
[Tidy 23:40:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:40:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:40:37 INFO] resetting WatchDogTimer
[Status 23:40:37 INFO] Starting Set [AERI set: name Y415, 6 scans, 0 angle, D16300 command]
[Ingest 23:40:37 INFO] Sending XML status message
[Status 23:40:37 INFO] Mirror angle: 0
[Mirror 23:40:38 INFO] rotating to position Y
[Status 23:40:38 INFO] .SET file for ACQ96 ready
[Ingest 23:40:39 INFO] Starting acquisition
[Status 23:40:39 INFO] reading housekeeping
[Status 23:40:57 INFO] acquire complete
[Status 23:40:58 INFO] writing housekeeping
[Sequencer 23:40:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:40:58 INFO] incremented Y scene to 415 completed views
[Sequencer 23:40:58 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:40:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:40:58 INFO] incremented to [AERI set: name Z415, 6 scans, 0 angle, D16300 command] set
[sigmove 23:40:58 INFO] Y415.SIG(18)
[sigmove 23:40:58 DEBUG] transformed Y415Ma.SPC -> Y415MA.SPC
[sigmove 23:40:58 DEBUG] transformed Y415Mb.SPC -> Y415MB.SPC
[sigmove 23:40:58 DEBUG] transformed Y415Mc.SPC -> Y415MC.SPC
[sigmove 23:40:58 DEBUG] transformed Y415Md.SPC -> Y415MD.SPC
[sigmove 23:40:58 DEBUG] transformed Y415Me.SPC -> Y415ME.SPC
[sigmove 23:40:58 DEBUG] transformed Y415Mf.SPC -> Y415MF.SPC
[Status 23:40:58 INFO] data for Y415 transferred to science data processing
[Tidy 23:40:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:40:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:40:58 INFO] resetting WatchDogTimer
[Status 23:40:59 INFO] Starting Set [AERI set: name Z415, 6 scans, 0 angle, D16300 command]
[Ingest 23:40:59 INFO] Sending XML status message
[Status 23:40:59 INFO] Mirror angle: 0
[Mirror 23:40:59 INFO] rotating to position Z
[Status 23:41:00 INFO] .SET file for ACQ96 ready
[Ingest 23:41:00 INFO] Starting acquisition
[Status 23:41:01 INFO] reading housekeeping
[Status 23:41:18 INFO] acquire complete
[Status 23:41:19 INFO] writing housekeeping
[Sequencer 23:41:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:41:19 INFO] incremented Z scene to 415 completed views
[Sequencer 23:41:19 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:41:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:41:19 INFO] incremented to [AERI set: name A416, 6 scans, 120 angle, D28300 command] set
[sigmove 23:41:19 INFO] Z415.SIG(18)
[sigmove 23:41:19 DEBUG] transformed Z415Ma.SPC -> Z415MA.SPC
[sigmove 23:41:19 DEBUG] transformed Z415Mb.SPC -> Z415MB.SPC
[sigmove 23:41:19 DEBUG] transformed Z415Mc.SPC -> Z415MC.SPC
[sigmove 23:41:19 DEBUG] transformed Z415Md.SPC -> Z415MD.SPC
[sigmove 23:41:19 DEBUG] transformed Z415Me.SPC -> Z415ME.SPC
[sigmove 23:41:19 DEBUG] transformed Z415Mf.SPC -> Z415MF.SPC
[Status 23:41:19 INFO] data for Z415 transferred to science data processing
[Tidy 23:41:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:41:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:41:19 INFO] resetting WatchDogTimer
[Status 23:41:20 INFO] Starting Set [AERI set: name A416, 6 scans, 120 angle, D28300 command]
[Ingest 23:41:20 INFO] Sending XML status message
[Status 23:41:20 INFO] Mirror angle: 120
[Mirror 23:41:20 INFO] rotating to position A
[Status 23:41:22 INFO] .SET file for ACQ96 ready
[Ingest 23:41:22 INFO] Starting acquisition
[Status 23:41:23 INFO] reading housekeeping
[Status 23:41:40 INFO] acquire complete
[Status 23:41:42 INFO] writing housekeeping
[Sequencer 23:41:42 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:41:42 INFO] incremented A scene to 416 completed views
[Sequencer 23:41:42 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:41:42 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:41:42 INFO] incremented to [AERI set: name H416, 6 scans, 60 angle, D22500 command] set
[sigmove 23:41:42 INFO] A416.SIG(18)
[sigmove 23:41:42 DEBUG] transformed A416Ma.SPC -> A416MA.SPC
[sigmove 23:41:42 DEBUG] transformed A416Mb.SPC -> A416MB.SPC
[sigmove 23:41:42 DEBUG] transformed A416Mc.SPC -> A416MC.SPC
[sigmove 23:41:42 DEBUG] transformed A416Md.SPC -> A416MD.SPC
[sigmove 23:41:42 DEBUG] transformed A416Me.SPC -> A416ME.SPC
[sigmove 23:41:42 DEBUG] transformed A416Mf.SPC -> A416MF.SPC
[Status 23:41:42 INFO] data for A416 transferred to science data processing
[Tidy 23:41:42 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:41:42 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:41:42 INFO] resetting WatchDogTimer
[Status 23:41:42 INFO] Starting Set [AERI set: name H416, 6 scans, 60 angle, D22500 command]
[Ingest 23:41:42 INFO] Sending XML status message
[Status 23:41:42 INFO] Mirror angle: 60
[Mirror 23:41:43 INFO] rotating to position H
[Status 23:41:44 INFO] .SET file for ACQ96 ready
[Ingest 23:41:44 INFO] Starting acquisition
[Status 23:41:45 INFO] reading housekeeping
[Status 23:42:03 INFO] acquire complete
[Status 23:42:04 INFO] writing housekeeping
[Sequencer 23:42:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:42:04 INFO] incremented H scene to 416 completed views
[Sequencer 23:42:04 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:42:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:42:04 INFO] incremented to [AERI set: name S416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:42:04 INFO] H416.SIG(18)
[sigmove 23:42:04 DEBUG] transformed H416Ma.SPC -> H416MA.SPC
[sigmove 23:42:04 DEBUG] transformed H416Mb.SPC -> H416MB.SPC
[sigmove 23:42:04 DEBUG] transformed H416Mc.SPC -> H416MC.SPC
[sigmove 23:42:04 DEBUG] transformed H416Md.SPC -> H416MD.SPC
[sigmove 23:42:04 DEBUG] transformed H416Me.SPC -> H416ME.SPC
[sigmove 23:42:04 DEBUG] transformed H416Mf.SPC -> H416MF.SPC
[Status 23:42:04 INFO] data for H416 transferred to science data processing
[Tidy 23:42:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:42:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:42:04 INFO] resetting WatchDogTimer
[Status 23:42:05 INFO] Starting Set [AERI set: name S416, 6 scans, 0 angle, D16300 command]
[Ingest 23:42:05 INFO] Sending XML status message
[Status 23:42:05 INFO] Mirror angle: 0
[Mirror 23:42:05 INFO] rotating to position S
[Status 23:42:06 INFO] .SET file for ACQ96 ready
[Ingest 23:42:07 INFO] Starting acquisition
[Status 23:42:07 INFO] reading housekeeping
[Status 23:42:25 INFO] acquire complete
[Status 23:42:27 INFO] writing housekeeping
[Sequencer 23:42:27 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:42:27 INFO] incremented S scene to 416 completed views
[Sequencer 23:42:27 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:42:27 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:42:27 INFO] incremented to [AERI set: name T416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:42:27 INFO] S416.SIG(18)
[sigmove 23:42:27 DEBUG] transformed S416Ma.SPC -> S416MA.SPC
[sigmove 23:42:27 DEBUG] transformed S416Mb.SPC -> S416MB.SPC
[sigmove 23:42:27 DEBUG] transformed S416Mc.SPC -> S416MC.SPC
[sigmove 23:42:27 DEBUG] transformed S416Md.SPC -> S416MD.SPC
[sigmove 23:42:27 DEBUG] transformed S416Me.SPC -> S416ME.SPC
[sigmove 23:42:27 DEBUG] transformed S416Mf.SPC -> S416MF.SPC
[Status 23:42:27 INFO] data for S416 transferred to science data processing
[Tidy 23:42:27 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:42:27 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:42:27 INFO] resetting WatchDogTimer
[Status 23:42:27 INFO] Starting Set [AERI set: name T416, 6 scans, 0 angle, D16300 command]
[Ingest 23:42:27 INFO] Sending XML status message
[Status 23:42:27 INFO] Mirror angle: 0
[Mirror 23:42:28 INFO] rotating to position T
[Status 23:42:28 INFO] .SET file for ACQ96 ready
[Ingest 23:42:29 INFO] Starting acquisition
[Status 23:42:29 INFO] reading housekeeping
[Status 23:42:47 INFO] acquire complete
[Status 23:42:48 INFO] writing housekeeping
[Sequencer 23:42:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:42:48 INFO] incremented T scene to 416 completed views
[Sequencer 23:42:48 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:42:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:42:48 INFO] incremented to [AERI set: name U416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:42:48 INFO] T416.SIG(18)
[sigmove 23:42:48 DEBUG] transformed T416Ma.SPC -> T416MA.SPC
[sigmove 23:42:48 DEBUG] transformed T416Mb.SPC -> T416MB.SPC
[sigmove 23:42:48 DEBUG] transformed T416Mc.SPC -> T416MC.SPC
[sigmove 23:42:48 DEBUG] transformed T416Md.SPC -> T416MD.SPC
[sigmove 23:42:48 DEBUG] transformed T416Me.SPC -> T416ME.SPC
[sigmove 23:42:48 DEBUG] transformed T416Mf.SPC -> T416MF.SPC
[Status 23:42:48 INFO] data for T416 transferred to science data processing
[Tidy 23:42:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:42:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:42:48 INFO] resetting WatchDogTimer
[Status 23:42:49 INFO] Starting Set [AERI set: name U416, 6 scans, 0 angle, D16300 command]
[Ingest 23:42:49 INFO] Sending XML status message
[Status 23:42:49 INFO] Mirror angle: 0
[Mirror 23:42:49 INFO] rotating to position U
[Status 23:42:50 INFO] .SET file for ACQ96 ready
[Ingest 23:42:50 INFO] Starting acquisition
[Status 23:42:51 INFO] reading housekeeping
[Status 23:43:09 INFO] acquire complete
[Status 23:43:10 INFO] writing housekeeping
[Sequencer 23:43:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:43:10 INFO] incremented U scene to 416 completed views
[Sequencer 23:43:10 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:43:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:43:10 INFO] incremented to [AERI set: name V416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:43:10 INFO] U416.SIG(18)
[sigmove 23:43:10 DEBUG] transformed U416Ma.SPC -> U416MA.SPC
[sigmove 23:43:10 DEBUG] transformed U416Mb.SPC -> U416MB.SPC
[sigmove 23:43:10 DEBUG] transformed U416Mc.SPC -> U416MC.SPC
[sigmove 23:43:10 DEBUG] transformed U416Md.SPC -> U416MD.SPC
[sigmove 23:43:10 DEBUG] transformed U416Me.SPC -> U416ME.SPC
[sigmove 23:43:10 DEBUG] transformed U416Mf.SPC -> U416MF.SPC
[Status 23:43:10 INFO] data for U416 transferred to science data processing
[Tidy 23:43:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:43:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:43:10 INFO] resetting WatchDogTimer
[Status 23:43:11 INFO] Starting Set [AERI set: name V416, 6 scans, 0 angle, D16300 command]
[Ingest 23:43:11 INFO] Sending XML status message
[Status 23:43:11 INFO] Mirror angle: 0
[Mirror 23:43:11 INFO] rotating to position V
[Status 23:43:12 INFO] .SET file for ACQ96 ready
[Ingest 23:43:12 INFO] Starting acquisition
[Status 23:43:13 INFO] reading housekeeping
[Status 23:43:30 INFO] acquire complete
[Status 23:43:32 INFO] writing housekeeping
[Sequencer 23:43:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:43:32 INFO] incremented V scene to 416 completed views
[Sequencer 23:43:32 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:43:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:43:32 INFO] incremented to [AERI set: name W416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:43:32 INFO] V416.SIG(18)
[sigmove 23:43:32 DEBUG] transformed V416Ma.SPC -> V416MA.SPC
[sigmove 23:43:32 DEBUG] transformed V416Mb.SPC -> V416MB.SPC
[sigmove 23:43:32 DEBUG] transformed V416Mc.SPC -> V416MC.SPC
[sigmove 23:43:32 DEBUG] transformed V416Md.SPC -> V416MD.SPC
[sigmove 23:43:32 DEBUG] transformed V416Me.SPC -> V416ME.SPC
[sigmove 23:43:32 DEBUG] transformed V416Mf.SPC -> V416MF.SPC
[Status 23:43:32 INFO] data for V416 transferred to science data processing
[Tidy 23:43:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:43:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:43:32 INFO] resetting WatchDogTimer
[Status 23:43:32 INFO] Starting Set [AERI set: name W416, 6 scans, 0 angle, D16300 command]
[Ingest 23:43:32 INFO] Sending XML status message
[Status 23:43:32 INFO] Mirror angle: 0
[Mirror 23:43:33 INFO] rotating to position W
[Status 23:43:33 INFO] .SET file for ACQ96 ready
[Ingest 23:43:34 INFO] Starting acquisition
[Status 23:43:34 INFO] reading housekeeping
[Status 23:43:52 INFO] acquire complete
[Status 23:43:53 INFO] writing housekeeping
[Sequencer 23:43:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:43:53 INFO] incremented W scene to 416 completed views
[Sequencer 23:43:53 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:43:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:43:53 INFO] incremented to [AERI set: name X416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:43:53 INFO] W416.SIG(18)
[sigmove 23:43:53 DEBUG] transformed W416Ma.SPC -> W416MA.SPC
[sigmove 23:43:53 DEBUG] transformed W416Mb.SPC -> W416MB.SPC
[sigmove 23:43:53 DEBUG] transformed W416Mc.SPC -> W416MC.SPC
[sigmove 23:43:53 DEBUG] transformed W416Md.SPC -> W416MD.SPC
[sigmove 23:43:53 DEBUG] transformed W416Me.SPC -> W416ME.SPC
[sigmove 23:43:53 DEBUG] transformed W416Mf.SPC -> W416MF.SPC
[Status 23:43:53 INFO] data for W416 transferred to science data processing
[Tidy 23:43:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:43:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:43:53 INFO] resetting WatchDogTimer
[Status 23:43:53 INFO] Starting Set [AERI set: name X416, 6 scans, 0 angle, D16300 command]
[Ingest 23:43:53 INFO] Sending XML status message
[Status 23:43:53 INFO] Mirror angle: 0
[Mirror 23:43:54 INFO] rotating to position X
[Status 23:43:55 INFO] .SET file for ACQ96 ready
[Ingest 23:43:55 INFO] Starting acquisition
[Status 23:43:56 INFO] reading housekeeping
[Status 23:44:13 INFO] acquire complete
[Status 23:44:14 INFO] writing housekeeping
[Sequencer 23:44:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:44:14 INFO] incremented X scene to 416 completed views
[Sequencer 23:44:14 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:44:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:44:14 INFO] incremented to [AERI set: name Y416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:44:14 INFO] X416.SIG(18)
[sigmove 23:44:14 DEBUG] transformed X416Ma.SPC -> X416MA.SPC
[sigmove 23:44:14 DEBUG] transformed X416Mb.SPC -> X416MB.SPC
[sigmove 23:44:14 DEBUG] transformed X416Mc.SPC -> X416MC.SPC
[sigmove 23:44:14 DEBUG] transformed X416Md.SPC -> X416MD.SPC
[sigmove 23:44:14 DEBUG] transformed X416Me.SPC -> X416ME.SPC
[sigmove 23:44:14 DEBUG] transformed X416Mf.SPC -> X416MF.SPC
[Status 23:44:14 INFO] data for X416 transferred to science data processing
[Tidy 23:44:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:44:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:44:14 INFO] resetting WatchDogTimer
[Status 23:44:15 INFO] Starting Set [AERI set: name Y416, 6 scans, 0 angle, D16300 command]
[Ingest 23:44:15 INFO] Sending XML status message
[Status 23:44:15 INFO] Mirror angle: 0
[Mirror 23:44:15 INFO] rotating to position Y
[Status 23:44:16 INFO] .SET file for ACQ96 ready
[Ingest 23:44:16 INFO] Starting acquisition
[Status 23:44:17 INFO] reading housekeeping
[Status 23:44:34 INFO] acquire complete
[Status 23:44:36 INFO] writing housekeeping
[Sequencer 23:44:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:44:36 INFO] incremented Y scene to 416 completed views
[Sequencer 23:44:36 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:44:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:44:36 INFO] incremented to [AERI set: name Z416, 6 scans, 0 angle, D16300 command] set
[sigmove 23:44:36 INFO] Y416.SIG(18)
[sigmove 23:44:36 DEBUG] transformed Y416Ma.SPC -> Y416MA.SPC
[sigmove 23:44:36 DEBUG] transformed Y416Mb.SPC -> Y416MB.SPC
[sigmove 23:44:36 DEBUG] transformed Y416Mc.SPC -> Y416MC.SPC
[sigmove 23:44:36 DEBUG] transformed Y416Md.SPC -> Y416MD.SPC
[sigmove 23:44:36 DEBUG] transformed Y416Me.SPC -> Y416ME.SPC
[sigmove 23:44:36 DEBUG] transformed Y416Mf.SPC -> Y416MF.SPC
[Status 23:44:36 INFO] data for Y416 transferred to science data processing
[Tidy 23:44:36 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:44:36 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:44:36 INFO] resetting WatchDogTimer
[Status 23:44:36 INFO] Starting Set [AERI set: name Z416, 6 scans, 0 angle, D16300 command]
[Ingest 23:44:36 INFO] Sending XML status message
[Status 23:44:36 INFO] Mirror angle: 0
[Mirror 23:44:37 INFO] rotating to position Z
[Status 23:44:37 INFO] .SET file for ACQ96 ready
[Ingest 23:44:38 INFO] Starting acquisition
[Status 23:44:38 INFO] reading housekeeping
[Status 23:44:56 INFO] acquire complete
[Status 23:44:57 INFO] writing housekeeping
[Sequencer 23:44:57 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:44:57 INFO] incremented Z scene to 416 completed views
[Sequencer 23:44:57 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:44:57 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:44:57 INFO] incremented to [AERI set: name H417, 6 scans, 60 angle, D22500 command] set
[sigmove 23:44:57 INFO] Z416.SIG(18)
[sigmove 23:44:57 DEBUG] transformed Z416Ma.SPC -> Z416MA.SPC
[sigmove 23:44:57 DEBUG] transformed Z416Mb.SPC -> Z416MB.SPC
[sigmove 23:44:57 DEBUG] transformed Z416Mc.SPC -> Z416MC.SPC
[sigmove 23:44:57 DEBUG] transformed Z416Md.SPC -> Z416MD.SPC
[sigmove 23:44:57 DEBUG] transformed Z416Me.SPC -> Z416ME.SPC
[sigmove 23:44:57 DEBUG] transformed Z416Mf.SPC -> Z416MF.SPC
[Status 23:44:57 INFO] data for Z416 transferred to science data processing
[Tidy 23:44:57 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:44:57 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:44:57 INFO] resetting WatchDogTimer
[Status 23:44:57 INFO] Starting Set [AERI set: name H417, 6 scans, 60 angle, D22500 command]
[Ingest 23:44:57 INFO] Sending XML status message
[Status 23:44:57 INFO] Mirror angle: 60
[Mirror 23:44:58 INFO] rotating to position H
[Status 23:44:59 INFO] .SET file for ACQ96 ready
[Ingest 23:44:59 INFO] Starting acquisition
[Status 23:45:00 INFO] reading housekeeping
[Status 23:45:18 INFO] acquire complete
[Status 23:45:19 INFO] writing housekeeping
[Sequencer 23:45:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:45:19 INFO] incremented H scene to 417 completed views
[Sequencer 23:45:19 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:45:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:45:19 INFO] incremented to [AERI set: name A417, 6 scans, 120 angle, D28300 command] set
[sigmove 23:45:19 INFO] H417.SIG(18)
[sigmove 23:45:19 DEBUG] transformed H417Ma.SPC -> H417MA.SPC
[sigmove 23:45:19 DEBUG] transformed H417Mb.SPC -> H417MB.SPC
[sigmove 23:45:19 DEBUG] transformed H417Mc.SPC -> H417MC.SPC
[sigmove 23:45:19 DEBUG] transformed H417Md.SPC -> H417MD.SPC
[sigmove 23:45:19 DEBUG] transformed H417Me.SPC -> H417ME.SPC
[sigmove 23:45:19 DEBUG] transformed H417Mf.SPC -> H417MF.SPC
[Status 23:45:19 INFO] data for H417 transferred to science data processing
[Tidy 23:45:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:45:19 INFO] A415.FIN(19),H415.FIN(19),S415.FIN(19),T415.FIN(19),U415.FIN(19),V415.FIN(19),W415.FIN(19),X415.FIN(19),Y415.FIN(19),Z415.FIN(19),A416.FIN(19),H416.FIN(19),S416.FIN(19),T416.FIN(19),U416.FIN(19),V416.FIN(19),W416.FIN(19),X416.FIN(19),Y416.FIN(19),Z416.FIN(19)
[sigmove 23:45:19 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:45:19 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:45:27 DEBUG] done zipping
[WatchDog 23:45:27 INFO] resetting WatchDogTimer
[Status 23:45:28 INFO] Starting Set [AERI set: name A417, 6 scans, 120 angle, D28300 command]
[Ingest 23:45:28 INFO] Sending XML status message
[Status 23:45:28 INFO] Mirror angle: 120
[Mirror 23:45:28 INFO] rotating to position A
[Status 23:45:29 INFO] .SET file for ACQ96 ready
[Ingest 23:45:30 INFO] Starting acquisition
[Status 23:45:30 INFO] reading housekeeping
[Status 23:45:48 INFO] acquire complete
[Status 23:45:50 INFO] writing housekeeping
[Sequencer 23:45:50 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:45:50 INFO] incremented A scene to 417 completed views
[Sequencer 23:45:50 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:45:50 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:45:50 INFO] incremented to [AERI set: name S417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:45:50 INFO] A417.SIG(18)
[sigmove 23:45:50 DEBUG] transformed A417Ma.SPC -> A417MA.SPC
[sigmove 23:45:50 DEBUG] transformed A417Mb.SPC -> A417MB.SPC
[sigmove 23:45:50 DEBUG] transformed A417Mc.SPC -> A417MC.SPC
[sigmove 23:45:50 DEBUG] transformed A417Md.SPC -> A417MD.SPC
[sigmove 23:45:50 DEBUG] transformed A417Me.SPC -> A417ME.SPC
[sigmove 23:45:50 DEBUG] transformed A417Mf.SPC -> A417MF.SPC
[Status 23:45:50 INFO] data for A417 transferred to science data processing
[Tidy 23:45:50 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:45:50 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:45:50 INFO] resetting WatchDogTimer
[Status 23:45:50 INFO] Starting Set [AERI set: name S417, 6 scans, 0 angle, D16300 command]
[Ingest 23:45:50 INFO] Sending XML status message
[Status 23:45:50 INFO] Mirror angle: 0
[Mirror 23:45:51 INFO] rotating to position S
[Status 23:45:52 INFO] .SET file for ACQ96 ready
[Ingest 23:45:53 INFO] Starting acquisition
[Status 23:45:53 INFO] reading housekeeping
[Status 23:46:11 INFO] acquire complete
[Status 23:46:12 INFO] writing housekeeping
[Sequencer 23:46:12 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:46:12 INFO] incremented S scene to 417 completed views
[Sequencer 23:46:12 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:46:12 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:46:12 INFO] incremented to [AERI set: name T417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:46:12 INFO] S417.SIG(18)
[sigmove 23:46:12 DEBUG] transformed S417Ma.SPC -> S417MA.SPC
[sigmove 23:46:12 DEBUG] transformed S417Mb.SPC -> S417MB.SPC
[sigmove 23:46:12 DEBUG] transformed S417Mc.SPC -> S417MC.SPC
[sigmove 23:46:12 DEBUG] transformed S417Md.SPC -> S417MD.SPC
[sigmove 23:46:12 DEBUG] transformed S417Me.SPC -> S417ME.SPC
[sigmove 23:46:12 DEBUG] transformed S417Mf.SPC -> S417MF.SPC
[Status 23:46:12 INFO] data for S417 transferred to science data processing
[Tidy 23:46:12 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:46:12 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:46:12 INFO] resetting WatchDogTimer
[Status 23:46:12 INFO] Starting Set [AERI set: name T417, 6 scans, 0 angle, D16300 command]
[Ingest 23:46:12 INFO] Sending XML status message
[Status 23:46:12 INFO] Mirror angle: 0
[Mirror 23:46:13 INFO] rotating to position T
[Status 23:46:14 INFO] .SET file for ACQ96 ready
[Ingest 23:46:14 INFO] Starting acquisition
[Status 23:46:15 INFO] reading housekeeping
[Status 23:46:32 INFO] acquire complete
[Status 23:46:33 INFO] writing housekeeping
[Sequencer 23:46:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:46:33 INFO] incremented T scene to 417 completed views
[Sequencer 23:46:33 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:46:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:46:33 INFO] incremented to [AERI set: name U417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:46:33 INFO] T417.SIG(18)
[sigmove 23:46:33 DEBUG] transformed T417Ma.SPC -> T417MA.SPC
[sigmove 23:46:33 DEBUG] transformed T417Mb.SPC -> T417MB.SPC
[sigmove 23:46:33 DEBUG] transformed T417Mc.SPC -> T417MC.SPC
[sigmove 23:46:33 DEBUG] transformed T417Md.SPC -> T417MD.SPC
[sigmove 23:46:33 DEBUG] transformed T417Me.SPC -> T417ME.SPC
[sigmove 23:46:33 DEBUG] transformed T417Mf.SPC -> T417MF.SPC
[Status 23:46:33 INFO] data for T417 transferred to science data processing
[Tidy 23:46:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:46:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:46:33 INFO] resetting WatchDogTimer
[Status 23:46:34 INFO] Starting Set [AERI set: name U417, 6 scans, 0 angle, D16300 command]
[Ingest 23:46:34 INFO] Sending XML status message
[Status 23:46:34 INFO] Mirror angle: 0
[Mirror 23:46:34 INFO] rotating to position U
[Status 23:46:35 INFO] .SET file for ACQ96 ready
[Ingest 23:46:35 INFO] Starting acquisition
[Status 23:46:36 INFO] reading housekeeping
[Status 23:46:53 INFO] acquire complete
[Status 23:46:55 INFO] writing housekeeping
[Sequencer 23:46:55 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:46:55 INFO] incremented U scene to 417 completed views
[Sequencer 23:46:55 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:46:55 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:46:55 INFO] incremented to [AERI set: name V417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:46:55 INFO] U417.SIG(18)
[sigmove 23:46:55 DEBUG] transformed U417Ma.SPC -> U417MA.SPC
[sigmove 23:46:55 DEBUG] transformed U417Mb.SPC -> U417MB.SPC
[sigmove 23:46:55 DEBUG] transformed U417Mc.SPC -> U417MC.SPC
[sigmove 23:46:55 DEBUG] transformed U417Md.SPC -> U417MD.SPC
[sigmove 23:46:55 DEBUG] transformed U417Me.SPC -> U417ME.SPC
[sigmove 23:46:55 DEBUG] transformed U417Mf.SPC -> U417MF.SPC
[Status 23:46:55 INFO] data for U417 transferred to science data processing
[Tidy 23:46:55 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:46:55 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:46:55 INFO] resetting WatchDogTimer
[Status 23:46:55 INFO] Starting Set [AERI set: name V417, 6 scans, 0 angle, D16300 command]
[Ingest 23:46:55 INFO] Sending XML status message
[Status 23:46:55 INFO] Mirror angle: 0
[Mirror 23:46:56 INFO] rotating to position V
[Status 23:46:56 INFO] .SET file for ACQ96 ready
[Ingest 23:46:57 INFO] Starting acquisition
[Status 23:46:57 INFO] reading housekeeping
[Status 23:47:15 INFO] acquire complete
[Status 23:47:16 INFO] writing housekeeping
[Sequencer 23:47:16 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:47:16 INFO] incremented V scene to 417 completed views
[Sequencer 23:47:16 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:47:16 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:47:16 INFO] incremented to [AERI set: name W417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:47:16 INFO] V417.SIG(18)
[sigmove 23:47:16 DEBUG] transformed V417Ma.SPC -> V417MA.SPC
[sigmove 23:47:16 DEBUG] transformed V417Mb.SPC -> V417MB.SPC
[sigmove 23:47:16 DEBUG] transformed V417Mc.SPC -> V417MC.SPC
[sigmove 23:47:16 DEBUG] transformed V417Md.SPC -> V417MD.SPC
[sigmove 23:47:16 DEBUG] transformed V417Me.SPC -> V417ME.SPC
[sigmove 23:47:16 DEBUG] transformed V417Mf.SPC -> V417MF.SPC
[Status 23:47:16 INFO] data for V417 transferred to science data processing
[Tidy 23:47:16 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:47:16 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:47:16 INFO] resetting WatchDogTimer
[Status 23:47:16 INFO] Starting Set [AERI set: name W417, 6 scans, 0 angle, D16300 command]
[Ingest 23:47:16 INFO] Sending XML status message
[Status 23:47:16 INFO] Mirror angle: 0
[Mirror 23:47:17 INFO] rotating to position W
[Status 23:47:18 INFO] .SET file for ACQ96 ready
[Ingest 23:47:18 INFO] Starting acquisition
[Status 23:47:19 INFO] reading housekeeping
[Status 23:47:36 INFO] acquire complete
[Status 23:47:37 INFO] writing housekeeping
[Sequencer 23:47:37 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:47:37 INFO] incremented W scene to 417 completed views
[Sequencer 23:47:37 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:47:37 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:47:37 INFO] incremented to [AERI set: name X417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:47:37 INFO] W417.SIG(18)
[sigmove 23:47:37 DEBUG] transformed W417Ma.SPC -> W417MA.SPC
[sigmove 23:47:37 DEBUG] transformed W417Mb.SPC -> W417MB.SPC
[sigmove 23:47:37 DEBUG] transformed W417Mc.SPC -> W417MC.SPC
[sigmove 23:47:37 DEBUG] transformed W417Md.SPC -> W417MD.SPC
[sigmove 23:47:37 DEBUG] transformed W417Me.SPC -> W417ME.SPC
[sigmove 23:47:37 DEBUG] transformed W417Mf.SPC -> W417MF.SPC
[Status 23:47:37 INFO] data for W417 transferred to science data processing
[Tidy 23:47:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:47:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:47:37 INFO] resetting WatchDogTimer
[Status 23:47:38 INFO] Starting Set [AERI set: name X417, 6 scans, 0 angle, D16300 command]
[Ingest 23:47:38 INFO] Sending XML status message
[Status 23:47:38 INFO] Mirror angle: 0
[Mirror 23:47:38 INFO] rotating to position X
[Status 23:47:39 INFO] .SET file for ACQ96 ready
[Ingest 23:47:39 INFO] Starting acquisition
[Status 23:47:40 INFO] reading housekeeping
[Status 23:47:57 INFO] acquire complete
[Status 23:47:58 INFO] writing housekeeping
[Sequencer 23:47:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:47:58 INFO] incremented X scene to 417 completed views
[Sequencer 23:47:58 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:47:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:47:59 INFO] incremented to [AERI set: name Y417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:47:59 INFO] X417.SIG(18)
[sigmove 23:47:59 DEBUG] transformed X417Ma.SPC -> X417MA.SPC
[sigmove 23:47:59 DEBUG] transformed X417Mb.SPC -> X417MB.SPC
[sigmove 23:47:59 DEBUG] transformed X417Mc.SPC -> X417MC.SPC
[sigmove 23:47:59 DEBUG] transformed X417Md.SPC -> X417MD.SPC
[sigmove 23:47:59 DEBUG] transformed X417Me.SPC -> X417ME.SPC
[sigmove 23:47:59 DEBUG] transformed X417Mf.SPC -> X417MF.SPC
[Status 23:47:59 INFO] data for X417 transferred to science data processing
[Tidy 23:47:59 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:47:59 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:47:59 INFO] resetting WatchDogTimer
[Status 23:47:59 INFO] Starting Set [AERI set: name Y417, 6 scans, 0 angle, D16300 command]
[Ingest 23:47:59 INFO] Sending XML status message
[Status 23:47:59 INFO] Mirror angle: 0
[Mirror 23:48:00 INFO] rotating to position Y
[Status 23:48:00 INFO] .SET file for ACQ96 ready
[Ingest 23:48:01 INFO] Starting acquisition
[Status 23:48:01 INFO] reading housekeeping
[Status 23:48:18 INFO] acquire complete
[Status 23:48:20 INFO] writing housekeeping
[Sequencer 23:48:20 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:48:20 INFO] incremented Y scene to 417 completed views
[Sequencer 23:48:20 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:48:20 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:48:20 INFO] incremented to [AERI set: name Z417, 6 scans, 0 angle, D16300 command] set
[sigmove 23:48:20 INFO] Y417.SIG(18)
[sigmove 23:48:20 DEBUG] transformed Y417Ma.SPC -> Y417MA.SPC
[sigmove 23:48:20 DEBUG] transformed Y417Mb.SPC -> Y417MB.SPC
[sigmove 23:48:20 DEBUG] transformed Y417Mc.SPC -> Y417MC.SPC
[sigmove 23:48:20 DEBUG] transformed Y417Md.SPC -> Y417MD.SPC
[sigmove 23:48:20 DEBUG] transformed Y417Me.SPC -> Y417ME.SPC
[sigmove 23:48:20 DEBUG] transformed Y417Mf.SPC -> Y417MF.SPC
[Status 23:48:20 INFO] data for Y417 transferred to science data processing
[Tidy 23:48:20 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:48:20 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:48:20 INFO] resetting WatchDogTimer
[Status 23:48:20 INFO] Starting Set [AERI set: name Z417, 6 scans, 0 angle, D16300 command]
[Ingest 23:48:20 INFO] Sending XML status message
[Status 23:48:20 INFO] Mirror angle: 0
[Mirror 23:48:21 INFO] rotating to position Z
[Status 23:48:21 INFO] .SET file for ACQ96 ready
[Ingest 23:48:22 INFO] Starting acquisition
[Status 23:48:22 INFO] reading housekeeping
[Status 23:48:40 INFO] acquire complete
[Status 23:48:41 INFO] writing housekeeping
[Sequencer 23:48:41 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:48:41 INFO] incremented Z scene to 417 completed views
[Sequencer 23:48:41 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:48:41 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:48:41 INFO] incremented to [AERI set: name A418, 6 scans, 120 angle, D28300 command] set
[sigmove 23:48:41 INFO] Z417.SIG(18)
[sigmove 23:48:41 DEBUG] transformed Z417Ma.SPC -> Z417MA.SPC
[sigmove 23:48:41 DEBUG] transformed Z417Mb.SPC -> Z417MB.SPC
[sigmove 23:48:41 DEBUG] transformed Z417Mc.SPC -> Z417MC.SPC
[sigmove 23:48:41 DEBUG] transformed Z417Md.SPC -> Z417MD.SPC
[sigmove 23:48:41 DEBUG] transformed Z417Me.SPC -> Z417ME.SPC
[sigmove 23:48:41 DEBUG] transformed Z417Mf.SPC -> Z417MF.SPC
[Status 23:48:41 INFO] data for Z417 transferred to science data processing
[Tidy 23:48:41 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:48:41 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:48:41 INFO] resetting WatchDogTimer
[Status 23:48:42 INFO] Starting Set [AERI set: name A418, 6 scans, 120 angle, D28300 command]
[Ingest 23:48:42 INFO] Sending XML status message
[Status 23:48:42 INFO] Mirror angle: 120
[Mirror 23:48:42 INFO] rotating to position A
[Status 23:48:44 INFO] .SET file for ACQ96 ready
[Ingest 23:48:44 INFO] Starting acquisition
[Status 23:48:45 INFO] reading housekeeping
[Status 23:49:02 INFO] acquire complete
[Status 23:49:04 INFO] writing housekeeping
[Sequencer 23:49:04 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:49:04 INFO] incremented A scene to 418 completed views
[Sequencer 23:49:04 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:49:04 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:49:04 INFO] incremented to [AERI set: name H418, 6 scans, 60 angle, D22500 command] set
[sigmove 23:49:04 INFO] A418.SIG(18)
[sigmove 23:49:04 DEBUG] transformed A418Ma.SPC -> A418MA.SPC
[sigmove 23:49:04 DEBUG] transformed A418Mb.SPC -> A418MB.SPC
[sigmove 23:49:04 DEBUG] transformed A418Mc.SPC -> A418MC.SPC
[sigmove 23:49:04 DEBUG] transformed A418Md.SPC -> A418MD.SPC
[sigmove 23:49:04 DEBUG] transformed A418Me.SPC -> A418ME.SPC
[sigmove 23:49:04 DEBUG] transformed A418Mf.SPC -> A418MF.SPC
[Status 23:49:04 INFO] data for A418 transferred to science data processing
[Tidy 23:49:04 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:49:04 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:49:04 INFO] resetting WatchDogTimer
[Status 23:49:04 INFO] Starting Set [AERI set: name H418, 6 scans, 60 angle, D22500 command]
[Ingest 23:49:04 INFO] Sending XML status message
[Status 23:49:04 INFO] Mirror angle: 60
[Mirror 23:49:05 INFO] rotating to position H
[Status 23:49:06 INFO] .SET file for ACQ96 ready
[Ingest 23:49:06 INFO] Starting acquisition
[Status 23:49:07 INFO] reading housekeeping
[Status 23:49:25 INFO] acquire complete
[Status 23:49:26 INFO] writing housekeeping
[Sequencer 23:49:26 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:49:26 INFO] incremented H scene to 418 completed views
[Sequencer 23:49:26 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:49:26 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:49:26 INFO] incremented to [AERI set: name S418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:49:26 INFO] H418.SIG(18)
[sigmove 23:49:26 DEBUG] transformed H418Ma.SPC -> H418MA.SPC
[sigmove 23:49:26 DEBUG] transformed H418Mb.SPC -> H418MB.SPC
[sigmove 23:49:26 DEBUG] transformed H418Mc.SPC -> H418MC.SPC
[sigmove 23:49:26 DEBUG] transformed H418Md.SPC -> H418MD.SPC
[sigmove 23:49:26 DEBUG] transformed H418Me.SPC -> H418ME.SPC
[sigmove 23:49:26 DEBUG] transformed H418Mf.SPC -> H418MF.SPC
[Status 23:49:26 INFO] data for H418 transferred to science data processing
[Tidy 23:49:26 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:49:26 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:49:26 INFO] resetting WatchDogTimer
[Status 23:49:26 INFO] Starting Set [AERI set: name S418, 6 scans, 0 angle, D16300 command]
[Ingest 23:49:26 INFO] Sending XML status message
[Status 23:49:26 INFO] Mirror angle: 0
[Mirror 23:49:27 INFO] rotating to position S
[Status 23:49:28 INFO] .SET file for ACQ96 ready
[Ingest 23:49:29 INFO] Starting acquisition
[Status 23:49:29 INFO] reading housekeeping
[Status 23:49:47 INFO] acquire complete
[Status 23:49:48 INFO] writing housekeeping
[Sequencer 23:49:48 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:49:48 INFO] incremented S scene to 418 completed views
[Sequencer 23:49:48 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:49:48 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:49:48 INFO] incremented to [AERI set: name T418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:49:48 INFO] S418.SIG(18)
[sigmove 23:49:48 DEBUG] transformed S418Ma.SPC -> S418MA.SPC
[sigmove 23:49:48 DEBUG] transformed S418Mb.SPC -> S418MB.SPC
[sigmove 23:49:48 DEBUG] transformed S418Mc.SPC -> S418MC.SPC
[sigmove 23:49:48 DEBUG] transformed S418Md.SPC -> S418MD.SPC
[sigmove 23:49:48 DEBUG] transformed S418Me.SPC -> S418ME.SPC
[sigmove 23:49:48 DEBUG] transformed S418Mf.SPC -> S418MF.SPC
[Status 23:49:48 INFO] data for S418 transferred to science data processing
[Tidy 23:49:48 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:49:48 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:49:48 INFO] resetting WatchDogTimer
[Status 23:49:49 INFO] Starting Set [AERI set: name T418, 6 scans, 0 angle, D16300 command]
[Ingest 23:49:49 INFO] Sending XML status message
[Status 23:49:49 INFO] Mirror angle: 0
[Mirror 23:49:49 INFO] rotating to position T
[Status 23:49:50 INFO] .SET file for ACQ96 ready
[Ingest 23:49:51 INFO] Starting acquisition
[Status 23:49:51 INFO] reading housekeeping
[Status 23:50:08 INFO] acquire complete
[Status 23:50:10 INFO] writing housekeeping
[Sequencer 23:50:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:50:10 INFO] incremented T scene to 418 completed views
[Sequencer 23:50:10 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:50:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:50:10 INFO] incremented to [AERI set: name U418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:50:10 INFO] T418.SIG(18)
[sigmove 23:50:10 DEBUG] transformed T418Ma.SPC -> T418MA.SPC
[sigmove 23:50:10 DEBUG] transformed T418Mb.SPC -> T418MB.SPC
[sigmove 23:50:10 DEBUG] transformed T418Mc.SPC -> T418MC.SPC
[sigmove 23:50:10 DEBUG] transformed T418Md.SPC -> T418MD.SPC
[sigmove 23:50:10 DEBUG] transformed T418Me.SPC -> T418ME.SPC
[sigmove 23:50:10 DEBUG] transformed T418Mf.SPC -> T418MF.SPC
[Status 23:50:10 INFO] data for T418 transferred to science data processing
[Tidy 23:50:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:50:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:50:10 INFO] resetting WatchDogTimer
[Status 23:50:10 INFO] Starting Set [AERI set: name U418, 6 scans, 0 angle, D16300 command]
[Ingest 23:50:10 INFO] Sending XML status message
[Status 23:50:10 INFO] Mirror angle: 0
[Mirror 23:50:11 INFO] rotating to position U
[Status 23:50:12 INFO] .SET file for ACQ96 ready
[Ingest 23:50:12 INFO] Starting acquisition
[Status 23:50:13 INFO] reading housekeeping
[Status 23:50:30 INFO] acquire complete
[Status 23:50:31 INFO] writing housekeeping
[Sequencer 23:50:31 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:50:31 INFO] incremented U scene to 418 completed views
[Sequencer 23:50:31 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:50:31 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:50:31 INFO] incremented to [AERI set: name V418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:50:31 INFO] U418.SIG(18)
[sigmove 23:50:31 DEBUG] transformed U418Ma.SPC -> U418MA.SPC
[sigmove 23:50:31 DEBUG] transformed U418Mb.SPC -> U418MB.SPC
[sigmove 23:50:31 DEBUG] transformed U418Mc.SPC -> U418MC.SPC
[sigmove 23:50:31 DEBUG] transformed U418Md.SPC -> U418MD.SPC
[sigmove 23:50:31 DEBUG] transformed U418Me.SPC -> U418ME.SPC
[sigmove 23:50:31 DEBUG] transformed U418Mf.SPC -> U418MF.SPC
[Status 23:50:31 INFO] data for U418 transferred to science data processing
[Tidy 23:50:31 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:50:31 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:50:31 INFO] resetting WatchDogTimer
[Status 23:50:31 INFO] Starting Set [AERI set: name V418, 6 scans, 0 angle, D16300 command]
[Ingest 23:50:31 INFO] Sending XML status message
[Status 23:50:31 INFO] Mirror angle: 0
[Mirror 23:50:32 INFO] rotating to position V
[Status 23:50:33 INFO] .SET file for ACQ96 ready
[Ingest 23:50:33 INFO] Starting acquisition
[Status 23:50:34 INFO] reading housekeeping
[Status 23:50:51 INFO] acquire complete
[Status 23:50:52 INFO] writing housekeeping
[Sequencer 23:50:52 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:50:52 INFO] incremented V scene to 418 completed views
[Sequencer 23:50:52 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:50:52 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:50:52 INFO] incremented to [AERI set: name W418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:50:52 INFO] V418.SIG(18)
[sigmove 23:50:52 DEBUG] transformed V418Ma.SPC -> V418MA.SPC
[sigmove 23:50:52 DEBUG] transformed V418Mb.SPC -> V418MB.SPC
[sigmove 23:50:52 DEBUG] transformed V418Mc.SPC -> V418MC.SPC
[sigmove 23:50:52 DEBUG] transformed V418Md.SPC -> V418MD.SPC
[sigmove 23:50:52 DEBUG] transformed V418Me.SPC -> V418ME.SPC
[sigmove 23:50:52 DEBUG] transformed V418Mf.SPC -> V418MF.SPC
[Status 23:50:52 INFO] data for V418 transferred to science data processing
[Tidy 23:50:52 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:50:52 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:50:52 INFO] resetting WatchDogTimer
[Status 23:50:53 INFO] Starting Set [AERI set: name W418, 6 scans, 0 angle, D16300 command]
[Ingest 23:50:53 INFO] Sending XML status message
[Status 23:50:53 INFO] Mirror angle: 0
[Mirror 23:50:53 INFO] rotating to position W
[Status 23:50:54 INFO] .SET file for ACQ96 ready
[Ingest 23:50:54 INFO] Starting acquisition
[Status 23:50:55 INFO] reading housekeeping
[Status 23:51:12 INFO] acquire complete
[Status 23:51:14 INFO] writing housekeeping
[Sequencer 23:51:14 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:51:14 INFO] incremented W scene to 418 completed views
[Sequencer 23:51:14 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:51:14 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:51:14 INFO] incremented to [AERI set: name X418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:51:14 INFO] W418.SIG(18)
[sigmove 23:51:14 DEBUG] transformed W418Ma.SPC -> W418MA.SPC
[sigmove 23:51:14 DEBUG] transformed W418Mb.SPC -> W418MB.SPC
[sigmove 23:51:14 DEBUG] transformed W418Mc.SPC -> W418MC.SPC
[sigmove 23:51:14 DEBUG] transformed W418Md.SPC -> W418MD.SPC
[sigmove 23:51:14 DEBUG] transformed W418Me.SPC -> W418ME.SPC
[sigmove 23:51:14 DEBUG] transformed W418Mf.SPC -> W418MF.SPC
[Status 23:51:14 INFO] data for W418 transferred to science data processing
[Tidy 23:51:14 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:51:14 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:51:14 INFO] resetting WatchDogTimer
[Status 23:51:14 INFO] Starting Set [AERI set: name X418, 6 scans, 0 angle, D16300 command]
[Ingest 23:51:14 INFO] Sending XML status message
[Status 23:51:14 INFO] Mirror angle: 0
[Mirror 23:51:15 INFO] rotating to position X
[Status 23:51:15 INFO] .SET file for ACQ96 ready
[Ingest 23:51:16 INFO] Starting acquisition
[Status 23:51:16 INFO] reading housekeeping
[Status 23:51:34 INFO] acquire complete
[Status 23:51:35 INFO] writing housekeeping
[Sequencer 23:51:35 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:51:35 INFO] incremented X scene to 418 completed views
[Sequencer 23:51:35 INFO] incremented mirror sequence on to view 19 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:51:35 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:51:35 INFO] incremented to [AERI set: name Y418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:51:35 INFO] X418.SIG(18)
[sigmove 23:51:35 DEBUG] transformed X418Ma.SPC -> X418MA.SPC
[sigmove 23:51:35 DEBUG] transformed X418Mb.SPC -> X418MB.SPC
[sigmove 23:51:35 DEBUG] transformed X418Mc.SPC -> X418MC.SPC
[sigmove 23:51:35 DEBUG] transformed X418Md.SPC -> X418MD.SPC
[sigmove 23:51:35 DEBUG] transformed X418Me.SPC -> X418ME.SPC
[sigmove 23:51:35 DEBUG] transformed X418Mf.SPC -> X418MF.SPC
[Status 23:51:35 INFO] data for X418 transferred to science data processing
[Tidy 23:51:35 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:51:35 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:51:35 INFO] resetting WatchDogTimer
[Status 23:51:35 INFO] Starting Set [AERI set: name Y418, 6 scans, 0 angle, D16300 command]
[Ingest 23:51:35 INFO] Sending XML status message
[Status 23:51:35 INFO] Mirror angle: 0
[Mirror 23:51:36 INFO] rotating to position Y
[Status 23:51:37 INFO] .SET file for ACQ96 ready
[Ingest 23:51:37 INFO] Starting acquisition
[Status 23:51:38 INFO] reading housekeeping
[Status 23:51:55 INFO] acquire complete
[Status 23:51:56 INFO] writing housekeeping
[Sequencer 23:51:56 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:51:56 INFO] incremented Y scene to 418 completed views
[Sequencer 23:51:56 INFO] incremented mirror sequence on to view 20 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:51:56 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:51:56 INFO] incremented to [AERI set: name Z418, 6 scans, 0 angle, D16300 command] set
[sigmove 23:51:56 INFO] Y418.SIG(18)
[sigmove 23:51:56 DEBUG] transformed Y418Ma.SPC -> Y418MA.SPC
[sigmove 23:51:56 DEBUG] transformed Y418Mb.SPC -> Y418MB.SPC
[sigmove 23:51:56 DEBUG] transformed Y418Mc.SPC -> Y418MC.SPC
[sigmove 23:51:56 DEBUG] transformed Y418Md.SPC -> Y418MD.SPC
[sigmove 23:51:56 DEBUG] transformed Y418Me.SPC -> Y418ME.SPC
[sigmove 23:51:56 DEBUG] transformed Y418Mf.SPC -> Y418MF.SPC
[Status 23:51:56 INFO] data for Y418 transferred to science data processing
[Tidy 23:51:56 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:51:56 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:51:56 INFO] resetting WatchDogTimer
[Status 23:51:57 INFO] Starting Set [AERI set: name Z418, 6 scans, 0 angle, D16300 command]
[Ingest 23:51:57 INFO] Sending XML status message
[Status 23:51:57 INFO] Mirror angle: 0
[Mirror 23:51:57 INFO] rotating to position Z
[Status 23:51:58 INFO] .SET file for ACQ96 ready
[Ingest 23:51:58 INFO] Starting acquisition
[Status 23:51:59 INFO] reading housekeeping
[Status 23:52:16 INFO] acquire complete
[Status 23:52:17 INFO] writing housekeeping
[Sequencer 23:52:17 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:52:17 INFO] incremented Z scene to 418 completed views
[Sequencer 23:52:17 INFO] incremented mirror sequence on to view 1 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:52:17 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:52:17 INFO] incremented to [AERI set: name H419, 6 scans, 60 angle, D22500 command] set
[sigmove 23:52:17 INFO] Z418.SIG(18)
[sigmove 23:52:17 DEBUG] transformed Z418Ma.SPC -> Z418MA.SPC
[sigmove 23:52:17 DEBUG] transformed Z418Mb.SPC -> Z418MB.SPC
[sigmove 23:52:17 DEBUG] transformed Z418Mc.SPC -> Z418MC.SPC
[sigmove 23:52:17 DEBUG] transformed Z418Md.SPC -> Z418MD.SPC
[sigmove 23:52:17 DEBUG] transformed Z418Me.SPC -> Z418ME.SPC
[sigmove 23:52:17 DEBUG] transformed Z418Mf.SPC -> Z418MF.SPC
[Status 23:52:17 INFO] data for Z418 transferred to science data processing
[Tidy 23:52:17 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:52:17 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:52:17 INFO] resetting WatchDogTimer
[Status 23:52:18 INFO] Starting Set [AERI set: name H419, 6 scans, 60 angle, D22500 command]
[Ingest 23:52:18 INFO] Sending XML status message
[Status 23:52:18 INFO] Mirror angle: 60
[Mirror 23:52:18 INFO] rotating to position H
[Status 23:52:20 INFO] .SET file for ACQ96 ready
[Ingest 23:52:20 INFO] Starting acquisition
[Status 23:52:21 INFO] reading housekeeping
[Status 23:52:39 INFO] acquire complete
[Status 23:52:40 INFO] writing housekeeping
[Sequencer 23:52:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:52:40 INFO] incremented H scene to 419 completed views
[Sequencer 23:52:40 INFO] incremented mirror sequence on to view 2 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:52:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:52:40 INFO] incremented to [AERI set: name A419, 6 scans, 120 angle, D28300 command] set
[sigmove 23:52:40 INFO] H419.SIG(18)
[sigmove 23:52:40 DEBUG] transformed H419Ma.SPC -> H419MA.SPC
[sigmove 23:52:40 DEBUG] transformed H419Mb.SPC -> H419MB.SPC
[sigmove 23:52:40 DEBUG] transformed H419Mc.SPC -> H419MC.SPC
[sigmove 23:52:40 DEBUG] transformed H419Md.SPC -> H419MD.SPC
[sigmove 23:52:40 DEBUG] transformed H419Me.SPC -> H419ME.SPC
[sigmove 23:52:40 DEBUG] transformed H419Mf.SPC -> H419MF.SPC
[Status 23:52:40 INFO] data for H419 transferred to science data processing
[Tidy 23:52:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:52:40 INFO] A417.FIN(19),H417.FIN(19),S417.FIN(19),T417.FIN(19),U417.FIN(19),V417.FIN(19),W417.FIN(19),X417.FIN(19),Y417.FIN(19),Z417.FIN(19),A418.FIN(19),H418.FIN(19),S418.FIN(19),T418.FIN(19),U418.FIN(19),V418.FIN(19),W418.FIN(19),X418.FIN(19),Y418.FIN(19),Z418.FIN(19)
[sigmove 23:52:40 INFO] opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:52:40 INFO] re-opening zipfile \AE100710\SPC_PAERI_100710.zip
[sigmove 23:52:47 DEBUG] done zipping
[WatchDog 23:52:48 INFO] resetting WatchDogTimer
[Status 23:52:48 INFO] Starting Set [AERI set: name A419, 6 scans, 120 angle, D28300 command]
[Ingest 23:52:48 INFO] Sending XML status message
[Status 23:52:48 INFO] Mirror angle: 120
[Mirror 23:52:49 INFO] rotating to position A
[Status 23:52:50 INFO] .SET file for ACQ96 ready
[Ingest 23:52:50 INFO] Starting acquisition
[Status 23:52:51 INFO] reading housekeeping
[Status 23:53:09 INFO] acquire complete
[Status 23:53:10 INFO] writing housekeeping
[Sequencer 23:53:10 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:53:10 INFO] incremented A scene to 419 completed views
[Sequencer 23:53:10 INFO] incremented mirror sequence on to view 3 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:53:10 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:53:10 INFO] incremented to [AERI set: name S419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:53:10 INFO] A419.SIG(18)
[sigmove 23:53:10 DEBUG] transformed A419Ma.SPC -> A419MA.SPC
[sigmove 23:53:10 DEBUG] transformed A419Mb.SPC -> A419MB.SPC
[sigmove 23:53:10 DEBUG] transformed A419Mc.SPC -> A419MC.SPC
[sigmove 23:53:10 DEBUG] transformed A419Md.SPC -> A419MD.SPC
[sigmove 23:53:10 DEBUG] transformed A419Me.SPC -> A419ME.SPC
[sigmove 23:53:10 DEBUG] transformed A419Mf.SPC -> A419MF.SPC
[Status 23:53:10 INFO] data for A419 transferred to science data processing
[Tidy 23:53:10 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:53:10 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:53:10 INFO] resetting WatchDogTimer
[Status 23:53:11 INFO] Starting Set [AERI set: name S419, 6 scans, 0 angle, D16300 command]
[Ingest 23:53:11 INFO] Sending XML status message
[Status 23:53:11 INFO] Mirror angle: 0
[Mirror 23:53:11 INFO] rotating to position S
[Status 23:53:13 INFO] .SET file for ACQ96 ready
[Ingest 23:53:13 INFO] Starting acquisition
[Status 23:53:14 INFO] reading housekeeping
[Status 23:53:31 INFO] acquire complete
[Status 23:53:33 INFO] writing housekeeping
[Sequencer 23:53:33 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:53:33 INFO] incremented S scene to 419 completed views
[Sequencer 23:53:33 INFO] incremented mirror sequence on to view 4 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:53:33 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:53:33 INFO] incremented to [AERI set: name T419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:53:33 INFO] S419.SIG(18)
[sigmove 23:53:33 DEBUG] transformed S419Ma.SPC -> S419MA.SPC
[sigmove 23:53:33 DEBUG] transformed S419Mb.SPC -> S419MB.SPC
[sigmove 23:53:33 DEBUG] transformed S419Mc.SPC -> S419MC.SPC
[sigmove 23:53:33 DEBUG] transformed S419Md.SPC -> S419MD.SPC
[sigmove 23:53:33 DEBUG] transformed S419Me.SPC -> S419ME.SPC
[sigmove 23:53:33 DEBUG] transformed S419Mf.SPC -> S419MF.SPC
[Status 23:53:33 INFO] data for S419 transferred to science data processing
[Tidy 23:53:33 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:53:33 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:53:33 INFO] resetting WatchDogTimer
[Status 23:53:33 INFO] Starting Set [AERI set: name T419, 6 scans, 0 angle, D16300 command]
[Ingest 23:53:33 INFO] Sending XML status message
[Status 23:53:33 INFO] Mirror angle: 0
[Mirror 23:53:34 INFO] rotating to position T
[Status 23:53:34 INFO] .SET file for ACQ96 ready
[Ingest 23:53:35 INFO] Starting acquisition
[Status 23:53:36 INFO] reading housekeeping
[Status 23:53:53 INFO] acquire complete
[Status 23:53:54 INFO] writing housekeeping
[Sequencer 23:53:54 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:53:54 INFO] incremented T scene to 419 completed views
[Sequencer 23:53:54 INFO] incremented mirror sequence on to view 5 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:53:54 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:53:54 INFO] incremented to [AERI set: name U419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:53:54 INFO] T419.SIG(18)
[sigmove 23:53:54 DEBUG] transformed T419Ma.SPC -> T419MA.SPC
[sigmove 23:53:54 DEBUG] transformed T419Mb.SPC -> T419MB.SPC
[sigmove 23:53:54 DEBUG] transformed T419Mc.SPC -> T419MC.SPC
[sigmove 23:53:54 DEBUG] transformed T419Md.SPC -> T419MD.SPC
[sigmove 23:53:54 DEBUG] transformed T419Me.SPC -> T419ME.SPC
[sigmove 23:53:54 DEBUG] transformed T419Mf.SPC -> T419MF.SPC
[Status 23:53:54 INFO] data for T419 transferred to science data processing
[Tidy 23:53:54 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:53:54 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:53:54 INFO] resetting WatchDogTimer
[Status 23:53:55 INFO] Starting Set [AERI set: name U419, 6 scans, 0 angle, D16300 command]
[Ingest 23:53:55 INFO] Sending XML status message
[Status 23:53:55 INFO] Mirror angle: 0
[Mirror 23:53:55 INFO] rotating to position U
[Status 23:53:56 INFO] .SET file for ACQ96 ready
[Ingest 23:53:56 INFO] Starting acquisition
[Status 23:53:57 INFO] reading housekeeping
[Status 23:54:14 INFO] acquire complete
[Status 23:54:15 INFO] writing housekeeping
[Sequencer 23:54:15 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:54:15 INFO] incremented U scene to 419 completed views
[Sequencer 23:54:15 INFO] incremented mirror sequence on to view 6 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:54:15 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:54:15 INFO] incremented to [AERI set: name V419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:54:15 INFO] U419.SIG(18)
[sigmove 23:54:15 DEBUG] transformed U419Ma.SPC -> U419MA.SPC
[sigmove 23:54:15 DEBUG] transformed U419Mb.SPC -> U419MB.SPC
[sigmove 23:54:15 DEBUG] transformed U419Mc.SPC -> U419MC.SPC
[sigmove 23:54:15 DEBUG] transformed U419Md.SPC -> U419MD.SPC
[sigmove 23:54:15 DEBUG] transformed U419Me.SPC -> U419ME.SPC
[sigmove 23:54:15 DEBUG] transformed U419Mf.SPC -> U419MF.SPC
[Status 23:54:15 INFO] data for U419 transferred to science data processing
[Tidy 23:54:15 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:54:15 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:54:15 INFO] resetting WatchDogTimer
[Status 23:54:16 INFO] Starting Set [AERI set: name V419, 6 scans, 0 angle, D16300 command]
[Ingest 23:54:16 INFO] Sending XML status message
[Status 23:54:16 INFO] Mirror angle: 0
[Mirror 23:54:16 INFO] rotating to position V
[Status 23:54:17 INFO] .SET file for ACQ96 ready
[Ingest 23:54:17 INFO] Starting acquisition
[Status 23:54:18 INFO] reading housekeeping
[Status 23:54:35 INFO] acquire complete
[Status 23:54:36 INFO] writing housekeeping
[Sequencer 23:54:36 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:54:36 INFO] incremented V scene to 419 completed views
[Sequencer 23:54:36 INFO] incremented mirror sequence on to view 7 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:54:36 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:54:37 INFO] incremented to [AERI set: name W419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:54:37 INFO] V419.SIG(18)
[sigmove 23:54:37 DEBUG] transformed V419Ma.SPC -> V419MA.SPC
[sigmove 23:54:37 DEBUG] transformed V419Mb.SPC -> V419MB.SPC
[sigmove 23:54:37 DEBUG] transformed V419Mc.SPC -> V419MC.SPC
[sigmove 23:54:37 DEBUG] transformed V419Md.SPC -> V419MD.SPC
[sigmove 23:54:37 DEBUG] transformed V419Me.SPC -> V419ME.SPC
[sigmove 23:54:37 DEBUG] transformed V419Mf.SPC -> V419MF.SPC
[Status 23:54:37 INFO] data for V419 transferred to science data processing
[Tidy 23:54:37 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:54:37 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:54:37 INFO] resetting WatchDogTimer
[Status 23:54:37 INFO] Starting Set [AERI set: name W419, 6 scans, 0 angle, D16300 command]
[Ingest 23:54:37 INFO] Sending XML status message
[Status 23:54:37 INFO] Mirror angle: 0
[Mirror 23:54:38 INFO] rotating to position W
[Status 23:54:38 INFO] .SET file for ACQ96 ready
[Ingest 23:54:39 INFO] Starting acquisition
[Status 23:54:39 INFO] reading housekeeping
[Status 23:54:57 INFO] acquire complete
[Status 23:54:58 INFO] writing housekeeping
[Sequencer 23:54:58 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:54:58 INFO] incremented W scene to 419 completed views
[Sequencer 23:54:58 INFO] incremented mirror sequence on to view 8 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:54:58 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:54:58 INFO] incremented to [AERI set: name X419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:54:58 INFO] W419.SIG(18)
[sigmove 23:54:58 DEBUG] transformed W419Ma.SPC -> W419MA.SPC
[sigmove 23:54:58 DEBUG] transformed W419Mb.SPC -> W419MB.SPC
[sigmove 23:54:58 DEBUG] transformed W419Mc.SPC -> W419MC.SPC
[sigmove 23:54:58 DEBUG] transformed W419Md.SPC -> W419MD.SPC
[sigmove 23:54:58 DEBUG] transformed W419Me.SPC -> W419ME.SPC
[sigmove 23:54:58 DEBUG] transformed W419Mf.SPC -> W419MF.SPC
[Status 23:54:58 INFO] data for W419 transferred to science data processing
[Tidy 23:54:58 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:54:58 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:54:58 INFO] resetting WatchDogTimer
[Status 23:54:58 INFO] Starting Set [AERI set: name X419, 6 scans, 0 angle, D16300 command]
[Ingest 23:54:58 INFO] Sending XML status message
[Status 23:54:58 INFO] Mirror angle: 0
[Mirror 23:54:59 INFO] rotating to position X
[Status 23:55:00 INFO] .SET file for ACQ96 ready
[Ingest 23:55:00 INFO] Starting acquisition
[Status 23:55:01 INFO] reading housekeeping
[Status 23:55:18 INFO] acquire complete
[Status 23:55:19 INFO] writing housekeeping
[Sequencer 23:55:19 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:55:19 INFO] incremented X scene to 419 completed views
[Sequencer 23:55:19 INFO] incremented mirror sequence on to view 9 = [position Y-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:55:19 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:55:19 INFO] incremented to [AERI set: name Y419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:55:19 INFO] X419.SIG(18)
[sigmove 23:55:19 DEBUG] transformed X419Ma.SPC -> X419MA.SPC
[sigmove 23:55:19 DEBUG] transformed X419Mb.SPC -> X419MB.SPC
[sigmove 23:55:19 DEBUG] transformed X419Mc.SPC -> X419MC.SPC
[sigmove 23:55:19 DEBUG] transformed X419Md.SPC -> X419MD.SPC
[sigmove 23:55:19 DEBUG] transformed X419Me.SPC -> X419ME.SPC
[sigmove 23:55:19 DEBUG] transformed X419Mf.SPC -> X419MF.SPC
[Status 23:55:19 INFO] data for X419 transferred to science data processing
[Tidy 23:55:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:55:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:55:19 INFO] resetting WatchDogTimer
[Status 23:55:20 INFO] Starting Set [AERI set: name Y419, 6 scans, 0 angle, D16300 command]
[Ingest 23:55:20 INFO] Sending XML status message
[Status 23:55:20 INFO] Mirror angle: 0
[Mirror 23:55:20 INFO] rotating to position Y
[Status 23:55:21 INFO] .SET file for ACQ96 ready
[Ingest 23:55:21 INFO] Starting acquisition
[Status 23:55:22 INFO] reading housekeeping
[Status 23:55:39 INFO] acquire complete
[Status 23:55:40 INFO] writing housekeeping
[Sequencer 23:55:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:55:40 INFO] incremented Y scene to 419 completed views
[Sequencer 23:55:40 INFO] incremented mirror sequence on to view 10 = [position Z-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:55:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:55:40 INFO] incremented to [AERI set: name Z419, 6 scans, 0 angle, D16300 command] set
[sigmove 23:55:40 INFO] Y419.SIG(18)
[sigmove 23:55:40 DEBUG] transformed Y419Ma.SPC -> Y419MA.SPC
[sigmove 23:55:40 DEBUG] transformed Y419Mb.SPC -> Y419MB.SPC
[sigmove 23:55:40 DEBUG] transformed Y419Mc.SPC -> Y419MC.SPC
[sigmove 23:55:40 DEBUG] transformed Y419Md.SPC -> Y419MD.SPC
[sigmove 23:55:40 DEBUG] transformed Y419Me.SPC -> Y419ME.SPC
[sigmove 23:55:40 DEBUG] transformed Y419Mf.SPC -> Y419MF.SPC
[Status 23:55:40 INFO] data for Y419 transferred to science data processing
[Tidy 23:55:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:55:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:55:40 INFO] resetting WatchDogTimer
[Status 23:55:41 INFO] Starting Set [AERI set: name Z419, 6 scans, 0 angle, D16300 command]
[Ingest 23:55:41 INFO] Sending XML status message
[Status 23:55:41 INFO] Mirror angle: 0
[Mirror 23:55:41 INFO] rotating to position Z
[Status 23:55:42 INFO] .SET file for ACQ96 ready
[Ingest 23:55:42 INFO] Starting acquisition
[Status 23:55:43 INFO] reading housekeeping
[Status 23:56:00 INFO] acquire complete
[Status 23:56:02 INFO] writing housekeeping
[Sequencer 23:56:02 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:56:02 INFO] incremented Z scene to 419 completed views
[Sequencer 23:56:02 INFO] incremented mirror sequence on to view 11 = [position ABB, scans 6, angle 120, command D28300]
[Sequencer 23:56:02 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:56:02 INFO] incremented to [AERI set: name A420, 6 scans, 120 angle, D28300 command] set
[sigmove 23:56:02 INFO] Z419.SIG(18)
[sigmove 23:56:02 DEBUG] transformed Z419Ma.SPC -> Z419MA.SPC
[sigmove 23:56:02 DEBUG] transformed Z419Mb.SPC -> Z419MB.SPC
[sigmove 23:56:02 DEBUG] transformed Z419Mc.SPC -> Z419MC.SPC
[sigmove 23:56:02 DEBUG] transformed Z419Md.SPC -> Z419MD.SPC
[sigmove 23:56:02 DEBUG] transformed Z419Me.SPC -> Z419ME.SPC
[sigmove 23:56:02 DEBUG] transformed Z419Mf.SPC -> Z419MF.SPC
[Status 23:56:02 INFO] data for Z419 transferred to science data processing
[Tidy 23:56:02 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:56:02 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:56:02 INFO] resetting WatchDogTimer
[Status 23:56:02 INFO] Starting Set [AERI set: name A420, 6 scans, 120 angle, D28300 command]
[Ingest 23:56:02 INFO] Sending XML status message
[Status 23:56:02 INFO] Mirror angle: 120
[Mirror 23:56:03 INFO] rotating to position A
[Status 23:56:04 INFO] .SET file for ACQ96 ready
[Ingest 23:56:05 INFO] Starting acquisition
[Status 23:56:06 INFO] reading housekeeping
[Status 23:56:23 INFO] acquire complete
[Status 23:56:24 INFO] writing housekeeping
[Sequencer 23:56:24 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:56:24 INFO] incremented A scene to 420 completed views
[Sequencer 23:56:24 INFO] incremented mirror sequence on to view 12 = [position HBB, scans 6, angle 60, command D22500]
[Sequencer 23:56:24 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:56:24 INFO] incremented to [AERI set: name H420, 6 scans, 60 angle, D22500 command] set
[sigmove 23:56:24 INFO] A420.SIG(18)
[sigmove 23:56:24 DEBUG] transformed A420Ma.SPC -> A420MA.SPC
[sigmove 23:56:24 DEBUG] transformed A420Mb.SPC -> A420MB.SPC
[sigmove 23:56:24 DEBUG] transformed A420Mc.SPC -> A420MC.SPC
[sigmove 23:56:24 DEBUG] transformed A420Md.SPC -> A420MD.SPC
[sigmove 23:56:24 DEBUG] transformed A420Me.SPC -> A420ME.SPC
[sigmove 23:56:24 DEBUG] transformed A420Mf.SPC -> A420MF.SPC
[Status 23:56:24 INFO] data for A420 transferred to science data processing
[Tidy 23:56:24 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:56:24 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:56:24 INFO] resetting WatchDogTimer
[Status 23:56:25 INFO] Starting Set [AERI set: name H420, 6 scans, 60 angle, D22500 command]
[Ingest 23:56:25 INFO] Sending XML status message
[Status 23:56:25 INFO] Mirror angle: 60
[Mirror 23:56:25 INFO] rotating to position H
[Status 23:56:26 INFO] .SET file for ACQ96 ready
[Ingest 23:56:27 INFO] Starting acquisition
[Status 23:56:27 INFO] reading housekeeping
[Status 23:56:45 INFO] acquire complete
[Status 23:56:47 INFO] writing housekeeping
[Sequencer 23:56:47 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:56:47 INFO] incremented H scene to 420 completed views
[Sequencer 23:56:47 INFO] incremented mirror sequence on to view 13 = [position SKY, scans 6, angle 0, command D16300]
[Sequencer 23:56:47 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:56:47 INFO] incremented to [AERI set: name S420, 6 scans, 0 angle, D16300 command] set
[sigmove 23:56:47 INFO] H420.SIG(18)
[sigmove 23:56:47 DEBUG] transformed H420Ma.SPC -> H420MA.SPC
[sigmove 23:56:47 DEBUG] transformed H420Mb.SPC -> H420MB.SPC
[sigmove 23:56:47 DEBUG] transformed H420Mc.SPC -> H420MC.SPC
[sigmove 23:56:47 DEBUG] transformed H420Md.SPC -> H420MD.SPC
[sigmove 23:56:47 DEBUG] transformed H420Me.SPC -> H420ME.SPC
[sigmove 23:56:47 DEBUG] transformed H420Mf.SPC -> H420MF.SPC
[Status 23:56:47 INFO] data for H420 transferred to science data processing
[Tidy 23:56:47 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:56:47 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:56:47 INFO] resetting WatchDogTimer
[Status 23:56:47 INFO] Starting Set [AERI set: name S420, 6 scans, 0 angle, D16300 command]
[Ingest 23:56:47 INFO] Sending XML status message
[Status 23:56:47 INFO] Mirror angle: 0
[Mirror 23:56:48 INFO] rotating to position S
[Status 23:56:49 INFO] .SET file for ACQ96 ready
[Ingest 23:56:49 INFO] Starting acquisition
[Status 23:56:50 INFO] reading housekeeping
[Status 23:57:08 INFO] acquire complete
[Status 23:57:09 INFO] writing housekeeping
[Sequencer 23:57:09 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:57:09 INFO] incremented S scene to 420 completed views
[Sequencer 23:57:09 INFO] incremented mirror sequence on to view 14 = [position T-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:57:09 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:57:09 INFO] incremented to [AERI set: name T420, 6 scans, 0 angle, D16300 command] set
[sigmove 23:57:09 INFO] S420.SIG(18)
[sigmove 23:57:09 DEBUG] transformed S420Ma.SPC -> S420MA.SPC
[sigmove 23:57:09 DEBUG] transformed S420Mb.SPC -> S420MB.SPC
[sigmove 23:57:09 DEBUG] transformed S420Mc.SPC -> S420MC.SPC
[sigmove 23:57:09 DEBUG] transformed S420Md.SPC -> S420MD.SPC
[sigmove 23:57:09 DEBUG] transformed S420Me.SPC -> S420ME.SPC
[sigmove 23:57:09 DEBUG] transformed S420Mf.SPC -> S420MF.SPC
[Status 23:57:09 INFO] data for S420 transferred to science data processing
[Tidy 23:57:09 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:57:09 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:57:09 INFO] resetting WatchDogTimer
[Status 23:57:10 INFO] Starting Set [AERI set: name T420, 6 scans, 0 angle, D16300 command]
[Ingest 23:57:10 INFO] Sending XML status message
[Status 23:57:10 INFO] Mirror angle: 0
[Mirror 23:57:10 INFO] rotating to position T
[Status 23:57:11 INFO] .SET file for ACQ96 ready
[Ingest 23:57:11 INFO] Starting acquisition
[Status 23:57:12 INFO] reading housekeeping
[Status 23:57:30 INFO] acquire complete
[Status 23:57:32 INFO] writing housekeeping
[Sequencer 23:57:32 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:57:32 INFO] incremented T scene to 420 completed views
[Sequencer 23:57:32 INFO] incremented mirror sequence on to view 15 = [position U-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:57:32 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:57:32 INFO] incremented to [AERI set: name U420, 6 scans, 0 angle, D16300 command] set
[sigmove 23:57:32 INFO] T420.SIG(18)
[sigmove 23:57:32 DEBUG] transformed T420Ma.SPC -> T420MA.SPC
[sigmove 23:57:32 DEBUG] transformed T420Mb.SPC -> T420MB.SPC
[sigmove 23:57:32 DEBUG] transformed T420Mc.SPC -> T420MC.SPC
[sigmove 23:57:32 DEBUG] transformed T420Md.SPC -> T420MD.SPC
[sigmove 23:57:32 DEBUG] transformed T420Me.SPC -> T420ME.SPC
[sigmove 23:57:32 DEBUG] transformed T420Mf.SPC -> T420MF.SPC
[Status 23:57:32 INFO] data for T420 transferred to science data processing
[Tidy 23:57:32 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:57:32 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:57:32 INFO] resetting WatchDogTimer
[Status 23:57:32 INFO] Starting Set [AERI set: name U420, 6 scans, 0 angle, D16300 command]
[Ingest 23:57:32 INFO] Sending XML status message
[Status 23:57:32 INFO] Mirror angle: 0
[Mirror 23:57:33 INFO] rotating to position U
[Status 23:57:33 INFO] .SET file for ACQ96 ready
[Ingest 23:57:34 INFO] Starting acquisition
[Status 23:57:34 INFO] reading housekeeping
[Status 23:57:51 INFO] acquire complete
[Status 23:57:53 INFO] writing housekeeping
[Sequencer 23:57:53 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:57:53 INFO] incremented U scene to 420 completed views
[Sequencer 23:57:53 INFO] incremented mirror sequence on to view 16 = [position V-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:57:53 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:57:53 INFO] incremented to [AERI set: name V420, 6 scans, 0 angle, D16300 command] set
[sigmove 23:57:53 INFO] U420.SIG(18)
[sigmove 23:57:53 DEBUG] transformed U420Ma.SPC -> U420MA.SPC
[sigmove 23:57:53 DEBUG] transformed U420Mb.SPC -> U420MB.SPC
[sigmove 23:57:53 DEBUG] transformed U420Mc.SPC -> U420MC.SPC
[sigmove 23:57:53 DEBUG] transformed U420Md.SPC -> U420MD.SPC
[sigmove 23:57:53 DEBUG] transformed U420Me.SPC -> U420ME.SPC
[sigmove 23:57:53 DEBUG] transformed U420Mf.SPC -> U420MF.SPC
[Status 23:57:53 INFO] data for U420 transferred to science data processing
[Tidy 23:57:53 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:57:53 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:57:53 INFO] resetting WatchDogTimer
[Status 23:57:53 INFO] Starting Set [AERI set: name V420, 6 scans, 0 angle, D16300 command]
[Ingest 23:57:53 INFO] Sending XML status message
[Status 23:57:53 INFO] Mirror angle: 0
[Mirror 23:57:54 INFO] rotating to position V
[Status 23:57:54 INFO] .SET file for ACQ96 ready
[Ingest 23:57:55 INFO] Starting acquisition
[Status 23:57:56 INFO] reading housekeeping
[Status 23:58:17 INFO] acquire complete
[Status 23:58:18 INFO] writing housekeeping
[Sequencer 23:58:18 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:58:18 INFO] incremented V scene to 420 completed views
[Sequencer 23:58:18 INFO] incremented mirror sequence on to view 17 = [position W-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:58:18 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:58:19 INFO] incremented to [AERI set: name W420, 6 scans, 0 angle, D16300 command] set
[sigmove 23:58:19 INFO] V420.SIG(18)
[sigmove 23:58:19 DEBUG] transformed V420Ma.SPC -> V420MA.SPC
[sigmove 23:58:19 DEBUG] transformed V420Mb.SPC -> V420MB.SPC
[sigmove 23:58:19 DEBUG] transformed V420Mc.SPC -> V420MC.SPC
[sigmove 23:58:19 DEBUG] transformed V420Md.SPC -> V420MD.SPC
[sigmove 23:58:19 DEBUG] transformed V420Me.SPC -> V420ME.SPC
[sigmove 23:58:19 DEBUG] transformed V420Mf.SPC -> V420MF.SPC
[Status 23:58:19 INFO] data for V420 transferred to science data processing
[Tidy 23:58:19 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:58:19 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:58:19 INFO] resetting WatchDogTimer
[Status 23:58:19 INFO] Starting Set [AERI set: name W420, 6 scans, 0 angle, D16300 command]
[Ingest 23:58:19 INFO] Sending XML status message
[Status 23:58:19 INFO] Mirror angle: 0
[Mirror 23:58:20 INFO] rotating to position W
[Status 23:58:20 INFO] .SET file for ACQ96 ready
[Ingest 23:58:21 INFO] Starting acquisition
[Status 23:58:21 INFO] reading housekeeping
[Status 23:58:39 INFO] acquire complete
[Status 23:58:40 INFO] writing housekeeping
[Sequencer 23:58:40 INFO] loaded mirror schedule and sequence label files
[Sequencer 23:58:40 INFO] incremented W scene to 420 completed views
[Sequencer 23:58:40 INFO] incremented mirror sequence on to view 18 = [position X-SKY, scans 6, angle 0, command D16300]
[Sequencer 23:58:40 INFO] wrote \temp\mirror.scd and \temp\seq.lab
[Status 23:58:40 INFO] incremented to [AERI set: name X420, 6 scans, 0 angle, D16300 command] set
[sigmove 23:58:40 INFO] W420.SIG(18)
[sigmove 23:58:40 DEBUG] transformed W420Ma.SPC -> W420MA.SPC
[sigmove 23:58:40 DEBUG] transformed W420Mb.SPC -> W420MB.SPC
[sigmove 23:58:40 DEBUG] transformed W420Mc.SPC -> W420MC.SPC
[sigmove 23:58:40 DEBUG] transformed W420Md.SPC -> W420MD.SPC
[sigmove 23:58:40 DEBUG] transformed W420Me.SPC -> W420ME.SPC
[sigmove 23:58:40 DEBUG] transformed W420Mf.SPC -> W420MF.SPC
[Status 23:58:40 INFO] data for W420 transferred to science data processing
[Tidy 23:58:40 INFO] moving SPC files to zipfile \AE100710\SPC_PAERI_100710.zip
[Tidy 23:58:40 DEBUG] no spc files to purge from science work dir!
[WatchDog 23:58:40 INFO] resetting WatchDogTimer
[Status 23:58:40 INFO] Starting Set [AERI set: name X420, 6 scans, 0 angle, D16300 command]
[Ingest 23:58:40 INFO] Sending XML status message
[Status 23:58:40 INFO] Mirror angle: 0
[Mirror 23:58:41 INFO] rotating to position X
[Status 23:58:41 INFO] .SET file for ACQ96 ready
[Ingest 23:58:42 INFO] Starting acquisition
[Status 23:58:42 INFO] reading housekeeping
[Status 23:59:00 INFO] acquire complete
[Ingest 23:59:01 INFO] received HUP signal; doing end-of-day shutdown
[Tidy 23:59:01 INFO] rebuilding outgoing directory
[Tidy 23:59:01 ERROR] time zone is not UTC!
[Tidy 23:59:01 ERROR] time zone is not UTC!
[Tidy 23:59:01 INFO] moving *100709* from old outgoing to new
[Tidy 23:59:01 INFO] importing data from \FTP\OUTGOING to \FTP\OUTGOING.NEW for patterns ['*100709*']
[Tidy 23:59:01 INFO] for *100709* found ['/cygdrive/c/FTP/OUTGOING/100709.PAR', '/cygdrive/c/FTP/OUTGOING/100709.QC', '/cygdrive/c/FTP/OUTGOING/100709.SUM', '/cygdrive/c/FTP/OUTGOING/100709B1.CXS', '/cygdrive/c/FTP/OUTGOING/100709B1.UVS', '/cygdrive/c/FTP/OUTGOING/100709B2.CXS', '/cygdrive/c/FTP/OUTGOING/100709B2.UVS', '/cygdrive/c/FTP/OUTGOING/100709C1.RNC', '/cygdrive/c/FTP/OUTGOING/100709C2.RNC', '/cygdrive/c/FTP/OUTGOING/100709F1.CSV', '/cygdrive/c/FTP/OUTGOING/100709F1.CXS', '/cygdrive/c/FTP/OUTGOING/100709F1.UVS', '/cygdrive/c/FTP/OUTGOING/100709F2.CSV', '/cygdrive/c/FTP/OUTGOING/100709F2.CXS', '/cygdrive/c/FTP/OUTGOING/100709F2.UVS']
[Tidy 23:59:01 INFO] moving *100708* from old outgoing to new
[Tidy 23:59:01 INFO] importing data from \FTP\OUTGOING to \FTP\OUTGOING.NEW for patterns ['*100708*']
[Tidy 23:59:02 INFO] for *100708* found ['/cygdrive/c/FTP/OUTGOING/100708.PAR', '/cygdrive/c/FTP/OUTGOING/100708.QC', '/cygdrive/c/FTP/OUTGOING/100708.SUM', '/cygdrive/c/FTP/OUTGOING/100708B1.CXS', '/cygdrive/c/FTP/OUTGOING/100708B1.UVS', '/cygdrive/c/FTP/OUTGOING/100708B2.CXS', '/cygdrive/c/FTP/OUTGOING/100708B2.UVS', '/cygdrive/c/FTP/OUTGOING/100708C1.RNC', '/cygdrive/c/FTP/OUTGOING/100708C2.RNC', '/cygdrive/c/FTP/OUTGOING/100708F1.CSV', '/cygdrive/c/FTP/OUTGOING/100708F1.CXS', '/cygdrive/c/FTP/OUTGOING/100708F1.UVS', '/cygdrive/c/FTP/OUTGOING/100708F2.CSV', '/cygdrive/c/FTP/OUTGOING/100708F2.CXS', '/cygdrive/c/FTP/OUTGOING/100708F2.UVS']
[Tidy 23:59:02 INFO] importing data from \FTP\AE100710 to \FTP\OUTGOING.NEW for patterns ['*.PAR', '*.QC', '*.SIT', '*.SUM', '*.CSV', '*.RNC', '*.CXS', '*.UVS', '*.LOG']
[Tidy 23:59:02 INFO] for *.PAR found ['/cygdrive/c/FTP/AE100710/100710.PAR']
[Tidy 23:59:02 INFO] for *.QC found ['/cygdrive/c/FTP/AE100710/100710.QC']
[Tidy 23:59:02 INFO] for *.SIT found []
[Tidy 23:59:03 INFO] for *.SUM found ['/cygdrive/c/FTP/AE100710/100710.SUM']
[Tidy 23:59:03 INFO] for *.CSV found ['/cygdrive/c/FTP/AE100710/100710F1.CSV', '/cygdrive/c/FTP/AE100710/100710F2.CSV']
[Tidy 23:59:03 INFO] for *.RNC found ['/cygdrive/c/FTP/AE100710/100710C1.RNC', '/cygdrive/c/FTP/AE100710/100710C2.RNC']
[Tidy 23:59:04 INFO] for *.CXS found ['/cygdrive/c/FTP/AE100710/100710B1.CXS', '/cygdrive/c/FTP/AE100710/100710B2.CXS', '/cygdrive/c/FTP/AE100710/100710F1.CXS', '/cygdrive/c/FTP/AE100710/100710F2.CXS']
[Tidy 23:59:04 INFO] for *.UVS found ['/cygdrive/c/FTP/AE100710/100710B1.UVS', '/cygdrive/c/FTP/AE100710/100710B2.UVS', '/cygdrive/c/FTP/AE100710/100710F1.UVS', '/cygdrive/c/FTP/AE100710/100710F2.UVS']
[Tidy 23:59:04 INFO] for *.LOG found []
[Tidy 23:59:04 INFO] done rebuilding outgoing directory
[Ingest 23:59:04 INFO] AERI shutting down
[Ingest 23:59:04 DEBUG] System Exit
[process 23:59:04 WARNING] killing process 400 due to process object destructor
[process 23:59:04 WARNING] result of kill: (400, 0)
[process 23:59:04 WARNING] killing process 1976 due to process object destructor
[process 23:59:04 WARNING] killed process 1976 during process.__del__
[process 23:59:04 WARNING] result of kill: (1976, 9)
[process 23:59:04 WARNING] killing process 3040 due to process object destructor
[process 23:59:04 WARNING] killed process 3040 during process.__del__
[process 23:59:04 WARNING] result of kill: (3040, 9)
[process 23:59:04 WARNING] killing process 1640 due to process object destructor
[process 23:59:04 WARNING] killed process 1640 during process.__del__
[process 23:59:04 WARNING] result of kill: (1640, 9)
[process 23:59:04 WARNING] killing process 3404 due to process object destructor
[process 23:59:04 WARNING] killed process 3404 during process.__del__
[process 23:59:04 WARNING] result of kill: (3404, 9)
[process 23:59:04 WARNING] killing process 2176 due to process object destructor
[process 23:59:04 WARNING] killed process 2176 during process.__del__
[process 23:59:04 WARNING] result of kill: (2176, 9)
[process 23:59:04 WARNING] killing process 2164 due to process object destructor
[process 23:59:04 WARNING] killed process 2164 during process.__del__
[process 23:59:04 WARNING] result of kill: (2164, 9)
[process 23:59:04 WARNING] killing process 3268 due to process object destructor
[process 23:59:04 WARNING] killed process 3268 during process.__del__
[process 23:59:04 WARNING] result of kill: (3268, 9)
[process 23:59:04 WARNING] killing process 3264 due to process object destructor
[process 23:59:04 WARNING] killed process 3264 during process.__del__
[process 23:59:04 WARNING] result of kill: (3264, 9)
[process 23:59:04 WARNING] killing process 2652 due to process object destructor
[process 23:59:04 WARNING] killed process 2652 during process.__del__
[process 23:59:04 WARNING] result of kill: (2652, 9)
[process 23:59:04 WARNING] killing process 2548 due to process object destructor
[process 23:59:04 WARNING] killed process 2548 during process.__del__
[process 23:59:04 WARNING] result of kill: (2548, 9)
[process 23:59:04 WARNING] killing process 2524 due to process object destructor
[process 23:59:04 WARNING] killed process 2524 during process.__del__
[process 23:59:04 WARNING] result of kill: (2524, 9)
[process 23:59:04 WARNING] killing process 2196 due to process object destructor
[process 23:59:04 WARNING] killed process 2196 during process.__del__
[process 23:59:04 WARNING] result of kill: (2196, 9)
[process 23:59:04 WARNING] killing process 2880 due to process object destructor
[process 23:59:04 WARNING] killed process 2880 during process.__del__
[process 23:59:04 WARNING] result of kill: (2880, 9)
[process 23:59:04 WARNING] killing process 2876 due to process object destructor
[process 23:59:04 WARNING] killed process 2876 during process.__del__
[process 23:59:04 WARNING] result of kill: (2876, 9)
[process 23:59:04 WARNING] killing process 1576 due to process object destructor
[process 23:59:04 WARNING] killed process 1576 during process.__del__
[process 23:59:04 WARNING] result of kill: (1576, 9)
[process 23:59:04 WARNING] killing process 3708 due to process object destructor
[process 23:59:04 WARNING] killed process 3708 during process.__del__
[process 23:59:04 WARNING] result of kill: (3708, 9)
[process 23:59:04 WARNING] killing process 244 due to process object destructor
[process 23:59:04 WARNING] killed process 244 during process.__del__
[process 23:59:04 WARNING] result of kill: (244, 9)
[process 23:59:04 WARNING] killing process 4012 due to process object destructor
[process 23:59:04 WARNING] killed process 4012 during process.__del__
[process 23:59:04 WARNING] result of kill: (4012, 9)
[process 23:59:04 WARNING] killing process 3880 due to process object destructor
[process 23:59:04 WARNING] killed process 3880 during process.__del__
[process 23:59:04 WARNING] result of kill: (3880, 9)
[process 23:59:04 WARNING] killing process 3164 due to process object destructor
[process 23:59:04 WARNING] result of kill: (3164, 0)
[process 23:59:04 WARNING] killing process 3760 due to process object destructor
[process 23:59:04 WARNING] killed process 3760 during process.__del__
[process 23:59:04 WARNING] result of kill: (3760, 9)
[process 23:59:04 WARNING] killing process 3668 due to process object destructor
[process 23:59:04 WARNING] killed process 3668 during process.__del__
[process 23:59:04 WARNING] result of kill: (3668, 9)
[process 23:59:04 WARNING] killing process 3556 due to process object destructor
[process 23:59:04 WARNING] killed process 3556 during process.__del__
[process 23:59:04 WARNING] result of kill: (3556, 9)
[process 23:59:04 WARNING] killing process 4020 due to process object destructor
[process 23:59:04 WARNING] killed process 4020 during process.__del__
[process 23:59:04 WARNING] result of kill: (4020, 9)