Nephelometer Configuration Data

Analog Output Range:         Zero V    Full Scale
    Relative Humidity   ->   0         100
    Barometric Pressure ->   0         1200
    Sample Temperature  ->   0         400
    Scattering          ->   7         2         (Offset=1.00000E-7)

Channel  Type                       Channel   Type
    0    9 (Relative Humidity)         5      5 (Red õsp)
    1    1 (Barometric Pressure)       6      6 (Blue õbsp)
    2    2 (Sample Temperature)        7      7 (Green õbsp)
    3    3 (Blue õsp)                  8      8 (Red õbsp)
    4    4 (Green õsp)

Calibration Points:     Low Bits  Low Value   High Bits  High Value
  Relative Humidity  -> 250         120         645         968
  Barometric Pressure-> 15359       1266        55291       9944
  Sample Temperature -> 0           0           39175       2979
  Inlet Temperature  -> 0           0           38991       2979

Calibration Constants:    K1        K2          K3          K4
              Blue ->   20000   2.663E-3    2.789E-5    5.252E-1
              Green->   20000   2.800E-3    1.226E-5    5.287E-1
              Red  ->   20000   1.923E-3    4.605E-6    5.257E-1

Data Delimiter:         Comma

Calibration Label:      TiksiCal_JB_1_5.6.2018

Backscatter Shutter Mode:            Enabled
Autozero Baseline Measurement:       Normal Mode

Lamp Power (Watts)               : 75
Auxiliary BNC Output (millivolts): 0

Time for Averaging  (sec.)          : 300
Time to Blank Valve (sec.)          : 30
Time between Autozeros (sec.)       : 3600
Time for AutoZero Measurement (sec.): 180

PMT Voltage:
  Blue  = 950
  Green = 1000
  Red   = 1000

Zero Baseline Values:   Total Scatter   BackScatter   Rayleigh Scatter
              Blue  ->    2.786E-5       1.419E-5       2.518E-5
              Green ->    1.414E-5       7.043E-6       1.106E-5
              Red   ->    1.013E-5       8.264E-6       4.125E-6