These daily files were generated from older tower data. The raw files are in BAOTowermet and PSD2 and
include data from 2000-2004. Data formats are different than the ones beginning 2007.

100m had working prop-vanes on both sides of the tower until 2003 YD 308 at which point only the
N one was working. After YD 316, both are gone.

Campbell P69 Instruction wasn't programmed into the data loggers for these data.
Unsure without further investigation if the directions are true or boom relative. I believe
they are True.

T/RH are not well calibrated and it's possible that the aspirator may not be working all the time.

Plots have been generated and are located in the Raw_Images directory.

Some of the 200m daily files have the same day repeated multiple times.

Raw directory containes files collected by data loggers using CAMPBELL PC208 or LOGGERNET
bao01003001.met baoHHHYYJJJ.met
HHH = boom ht (m) YY = year JJJ = year day (UTC)
bao0202908.p03 files are from when Dan Gottas' DAS program was used to collect the data. Pre 2002, 2001
baoYYJJJhh.Pnn
YY = year JJJ = Year day hh = hour nn = level number P03, P05, P07 correspond to 10, 100, 300m repectively

Processed directory data have been reformatted from the raw format to a more user friendly daily format and filename structure.
BAO_010_2001029.dat BAO_HHH_YYYJJJ.dat
HHH = boom Ht (m)  YYYY = year JJJ = Year Day (UTC)

Raw_images directory has winds and T/RH plots of data.

There may not be a 1-1 correspondence to data and plots.

MATLAB_programs directory contains programs used to read Processed data files and generate plots.

I bielve data processed all the *.met files into daily *.dat files.