08/24/2008   11:00:00: opening error log

08/24/2008   11:00:00: NOTE: UPS disabled by user

08/24/2008   11:37:53: opening error log

08/24/2008   11:37:53: NOTE: UPS disabled by user

08/24/2008   11:37:57: warning:attempt to start TWTA when not in remote mode.

08/24/2008   12:00:00: closing error log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
08/24/08 11:00:03 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:00:03 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:00:03 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:00:03 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:00:03 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:00:03 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:00:03 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:00:03 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:16:57 Level 5 - Main - UnLoad Requested
08/24/08 11:16:59 Level 5 - Main - UnLoaded
08/24/08 11:17:38 Level 5 - Main - Lapxm Service Stopped
08/24/08 11:20:02 Level 5 - Main - Lapxm Service Started
08/24/08 11:20:02 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:20:02 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:20:08 Level 5 - Main - Load Requested
08/24/08 11:20:08 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:20:08 Level 5 - Main - Start Requested
08/24/08 11:20:10 Level 5 - Main - Started
08/24/08 11:20:12 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:20:12 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:20:12 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:20:12 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:20:12 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:20:12 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:20:12 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:20:12 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:20:12 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:20:12 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:20:12 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:20:12 Level 2 - NetCDF_Spec1 - No Calibration will be performed.
08/24/08 11:20:12 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:20:12 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:20:12 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:20:12 Level 2 - NetCDF_Spec1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:20:48 Level 5 - Main - Lapxm Service Started
08/24/08 11:20:48 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:20:48 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:20:53 Level 5 - Main - Load Requested
08/24/08 11:20:53 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:20:53 Level 5 - Main - Start Requested
08/24/08 11:20:55 Level 5 - Main - Started
08/24/08 11:20:55 Level 5 - Main - UnLoad Requested
08/24/08 11:20:55 Level 5 - Main - UnLoaded
08/24/08 11:21:48 Level 5 - Main - Load Requested
08/24/08 11:21:48 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:21:48 Level 5 - Main - Start Requested
08/24/08 11:21:50 Level 5 - Main - Started
08/24/08 11:21:52 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:21:52 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:21:52 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:21:52 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:21:52 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:21:52 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:21:52 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:21:52 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:21:52 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:21:52 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:21:52 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:21:52 Level 2 - NetCDF1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:21:52 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:21:52 Level 2 - NetCDF1 - No Calibration will be performed.
08/24/08 11:21:52 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:21:52 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:21:52 Level 2 - NetCDF1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:22:31 Level 5 - Main - Lapxm Service Started
08/24/08 11:22:31 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:22:31 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:22:36 Level 5 - Main - Load Requested
08/24/08 11:22:36 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:22:36 Level 5 - Main - Start Requested
08/24/08 11:22:38 Level 5 - Main - Started
08/24/08 11:22:40 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:22:40 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:22:40 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:22:40 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:22:40 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:22:40 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:22:40 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:22:40 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:22:40 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:22:40 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:22:40 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:22:40 Level 2 - NetCDF_Spec1 - No Calibration will be performed.
08/24/08 11:22:40 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:22:40 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:22:40 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:22:40 Level 2 - NetCDF_Spec1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:22:45 Level 5 - Main - Lapxm Service Started
08/24/08 11:22:45 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:22:45 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:22:50 Level 5 - Main - Load Requested
08/24/08 11:22:50 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:22:50 Level 5 - Main - Start Requested
08/24/08 11:22:53 Level 5 - Main - Started
08/24/08 11:22:53 Level 5 - Main - UnLoad Requested
08/24/08 11:22:53 Level 5 - Main - UnLoaded
08/24/08 11:23:26 Level 5 - Main - Load Requested
08/24/08 11:23:26 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:23:26 Level 5 - Main - Start Requested
08/24/08 11:23:28 Level 5 - Main - Started
08/24/08 11:23:30 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:23:30 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:23:30 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:23:30 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:23:30 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:23:30 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:23:30 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:23:30 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:23:30 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:23:30 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:23:38 Level 5 - Main - Lapxm Service Started
08/24/08 11:23:38 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:23:38 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:23:43 Level 5 - Main - Load Requested
08/24/08 11:23:43 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:23:43 Level 5 - Main - Start Requested
08/24/08 11:23:45 Level 5 - Main - Started
08/24/08 11:23:47 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:23:47 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:23:47 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:23:47 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:23:47 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:23:47 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:23:58 Level 5 - Main - Lapxm Service Started
08/24/08 11:23:58 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:23:58 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:24:03 Level 5 - Main - Load Requested
08/24/08 11:24:03 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:24:03 Level 5 - Main - Start Requested
08/24/08 11:24:06 Level 5 - Main - Started
08/24/08 11:24:06 Level 5 - Main - UnLoad Requested
08/24/08 11:24:06 Level 5 - Main - UnLoaded
08/24/08 11:24:18 Level 5 - Main - Lapxm Service Stopped
08/24/08 11:24:18 Level 2 - Main - UnLoad() - Unable to uninitialize DwellControl_Calibration
08/24/08 11:24:25 Level 5 - Main - Lapxm Service Started
08/24/08 11:24:25 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:24:25 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:24:30 Level 5 - Main - Load Requested
08/24/08 11:24:30 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:24:30 Level 5 - Main - Start Requested
08/24/08 11:24:32 Level 5 - Main - Started
08/24/08 11:24:35 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:24:35 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:24:35 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:24:35 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:24:35 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:24:35 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:24:35 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:24:35 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:24:35 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:24:35 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:24:35 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:24:35 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:24:35 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:24:35 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:24:35 Level 2 - NetCDF1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:24:35 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:24:35 Level 2 - NetCDF1 - No Calibration will be performed.
08/24/08 11:24:42 Level 5 - Main - Lapxm Service Started
08/24/08 11:24:42 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:24:42 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:24:47 Level 5 - Main - Load Requested
08/24/08 11:24:47 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:24:47 Level 5 - Main - Start Requested
08/24/08 11:24:49 Level 5 - Main - Started
08/24/08 11:24:51 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:24:51 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:24:51 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:24:51 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:24:51 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:24:51 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:24:52 Level 5 - Main - Lapxm Service Started
08/24/08 11:24:52 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:24:52 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:24:57 Level 5 - Main - Load Requested
08/24/08 11:24:57 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:24:57 Level 5 - Main - Start Requested
08/24/08 11:24:59 Level 5 - Main - Started
08/24/08 11:25:01 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:25:01 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:25:01 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:25:01 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:25:01 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:25:01 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:25:01 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:25:01 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:25:01 Level 2 - NetCDF_Spec1 - No Calibration will be performed.
08/24/08 11:25:01 Level 2 - NetCDF_Spec1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:25:35 Level 5 - Main - Lapxm Service Started
08/24/08 11:25:35 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:25:35 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:25:40 Level 5 - Main - Load Requested
08/24/08 11:25:40 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:25:40 Level 5 - Main - Start Requested
08/24/08 11:25:42 Level 5 - Main - Started
08/24/08 11:25:44 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:25:44 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:25:44 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:25:44 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:25:44 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:25:44 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:25:44 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:25:44 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:26:20 Level 5 - Main - Lapxm Service Started
08/24/08 11:26:20 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:26:20 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:26:25 Level 5 - Main - Load Requested
08/24/08 11:26:25 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:26:25 Level 5 - Main - Start Requested
08/24/08 11:26:27 Level 5 - Main - Started
08/24/08 11:26:29 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:26:29 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:26:29 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:26:29 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:26:29 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:26:29 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:26:29 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:26:29 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:26:29 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:26:29 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:26:35 Level 5 - Main - Lapxm Service Started
08/24/08 11:26:35 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:26:35 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:26:40 Level 5 - Main - Load Requested
08/24/08 11:26:40 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:26:40 Level 5 - Main - Start Requested
08/24/08 11:26:42 Level 5 - Main - Started
08/24/08 11:26:44 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:26:44 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:26:44 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:26:44 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:26:44 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:26:44 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:26:44 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:26:44 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:26:44 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:26:51 Level 5 - Main - Lapxm Service Started
08/24/08 11:26:51 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:26:51 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:26:56 Level 5 - Main - Load Requested
08/24/08 11:26:56 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:26:56 Level 5 - Main - Start Requested
08/24/08 11:26:58 Level 5 - Main - Started
08/24/08 11:27:00 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:27:00 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:27:00 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:27:00 Level 2 - NetCDF_Spec1 - Not a netCDF file
08/24/08 11:27:00 Level 2 - NetCDF_Spec1 - Could not open NetCDF file. Data not written to file.
08/24/08 11:27:00 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:27:00 Level 2 - NetCDF1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:27:00 Level 2 - NetCDF1 - No Calibration will be performed.
08/24/08 11:27:00 Level 2 - NetCDF1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:27:09 Level 5 - Main - Lapxm Service Started
08/24/08 11:27:09 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:27:09 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:27:15 Level 5 - Main - Load Requested
08/24/08 11:27:15 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:27:15 Level 5 - Main - Start Requested
08/24/08 11:27:17 Level 5 - Main - Started
08/24/08 11:27:17 Level 5 - Main - UnLoad Requested
08/24/08 11:27:17 Level 5 - Main - UnLoaded
08/24/08 11:27:17 Level 5 - Main - UnLoad Requested
08/24/08 11:27:17 Level 5 - Main - UnLoaded
08/24/08 11:27:51 Level 5 - Main - Load Requested
08/24/08 11:27:51 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:27:51 Level 5 - Main - Start Requested
08/24/08 11:27:54 Level 5 - Main - Started
08/24/08 11:27:56 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:27:56 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:27:56 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:27:56 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:27:56 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:27:56 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:27:56 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:27:56 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:27:56 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:27:56 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:27:56 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:27:56 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:27:56 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:27:56 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:27:56 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:28:11 Level 5 - Main - Lapxm Service Started
08/24/08 11:28:11 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:28:11 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:28:16 Level 5 - Main - Load Requested
08/24/08 11:28:16 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:28:16 Level 5 - Main - Start Requested
08/24/08 11:28:18 Level 5 - Main - Started
08/24/08 11:28:18 Level 5 - Main - UnLoad Requested
08/24/08 11:28:18 Level 5 - Main - UnLoaded
08/24/08 11:28:28 Level 5 - Main - Lapxm Service Stopped
08/24/08 11:28:28 Level 2 - Main - UnLoad() - Unable to uninitialize DwellControl_Calibration
08/24/08 11:32:01 Level 5 - Main - Lapxm Service Started
08/24/08 11:32:01 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:32:01 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:32:06 Level 5 - Main - Load Requested
08/24/08 11:32:06 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:32:06 Level 5 - Main - Start Requested
08/24/08 11:32:09 Level 5 - Main - Started
08/24/08 11:32:11 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:32:11 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:32:11 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:32:11 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:32:11 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:32:11 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:11 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:32:11 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:32:11 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:32:11 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:32:11 Level 2 - NetCDF1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:11 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:11 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:32:11 Level 2 - NetCDF1 - No Calibration will be performed.
08/24/08 11:32:11 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:11 Level 2 - NetCDF_Spec1 - No Calibration will be performed.
08/24/08 11:32:11 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:32:11 Level 2 - NetCDF_Spec1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:32:23 Level 5 - Main - Lapxm Service Started
08/24/08 11:32:23 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:32:23 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:32:28 Level 5 - Main - Load Requested
08/24/08 11:32:28 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:32:28 Level 5 - Main - Start Requested
08/24/08 11:32:30 Level 5 - Main - Started
08/24/08 11:32:32 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:32 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:32:32 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:32:32 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:32 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:32:32 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:32:49 Level 5 - Main - Lapxm Service Started
08/24/08 11:32:49 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:32:49 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:32:54 Level 5 - Main - Load Requested
08/24/08 11:32:54 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:32:54 Level 5 - Main - Start Requested
08/24/08 11:32:56 Level 5 - Main - Started
08/24/08 11:32:58 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:58 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:32:58 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:32:58 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:32:58 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:32:58 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:33:20 Level 5 - Main - Lapxm Service Started
08/24/08 11:33:20 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:33:20 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:33:25 Level 5 - Main - Load Requested
08/24/08 11:33:25 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:33:25 Level 5 - Main - Start Requested
08/24/08 11:33:28 Level 5 - Main - Started
08/24/08 11:33:28 Level 5 - Main - Pause Requested
08/24/08 11:33:28 Level 2 - PulseHw - StartPulses() failed because LoadPulseParameters() not called.
08/24/08 11:33:28 Level 5 - Main - Paused
08/24/08 11:33:28 Level 5 - Main - UnLoad Requested
08/24/08 11:33:29 Level 5 - Main - UnLoaded
08/24/08 11:33:47 Level 5 - Main - Load Requested
08/24/08 11:33:47 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:33:47 Level 5 - Main - Start Requested
08/24/08 11:33:49 Level 5 - Main - Started
08/24/08 11:33:51 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:33:51 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:33:51 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:33:51 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:33:51 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:33:51 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:33:51 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:33:51 Level 2 - NetCDF1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:33:51 Level 2 - NetCDF1 - No Calibration will be performed.
08/24/08 11:33:51 Level 2 - NetCDF1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:33:51 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:33:51 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:33:51 Level 2 - NetCDF_Spec1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:33:51 Level 2 - NetCDF_Spec1 - No Calibration will be performed.
08/24/08 11:33:51 Level 2 - NetCDF_Spec1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:34:38 Level 5 - Main - Lapxm Service Started
08/24/08 11:34:38 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:34:38 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:34:43 Level 5 - Main - Load Requested
08/24/08 11:34:43 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:34:43 Level 5 - Main - Start Requested
08/24/08 11:34:46 Level 5 - Main - Started
08/24/08 11:34:47 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
08/24/08 11:34:47 Level 2 - NetCDF_Spec - Data may be incorrect.
08/24/08 11:34:47 Level 2 - NetCDF - Could not read calibration table NetCDF file.
08/24/08 11:34:47 Level 2 - NetCDF - Data may be incorrect.
08/24/08 11:34:47 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
08/24/08 11:34:47 Level 2 - NetCDF_Spec1 - Data may be incorrect.
08/24/08 11:34:47 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
08/24/08 11:34:47 Level 2 - NetCDF1 - Data may be incorrect.
08/24/08 11:34:47 Level 2 - NetCDF_Spec - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:34:47 Level 2 - NetCDF_Spec - No Calibration will be performed.
08/24/08 11:34:47 Level 2 - NetCDF_Spec - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:34:48 Level 2 - NetCDF - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:34:48 Level 2 - NetCDF - No Calibration will be performed.
08/24/08 11:34:48 Level 2 - NetCDF - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:34:48 Level 2 - NetCDF1 - Could not find entries in CalTable.nc for this Dwell.
08/24/08 11:34:48 Level 2 - NetCDF1 - No Calibration will be performed.
08/24/08 11:34:48 Level 2 - NetCDF1 - IPP = 68000, PW = 300, CodeBits = 0, NCI = 6, NumFFT = 256, NSpec = 10, Number Of Receivers = 1, Receiver Number = 1
08/24/08 11:40:24 Level 5 - Main - Lapxm Service Started
08/24/08 11:40:24 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
08/24/08 11:40:24 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\ASCOS_CalSPC_V1.cfg
08/24/08 11:40:30 Level 5 - Main - Load Requested
08/24/08 11:40:30 Level 5 - Main - Loaded - ASCOS_CalSPC_V1.cfg
08/24/08 11:40:30 Level 5 - Main - Start Requested
08/24/08 11:40:32 Level 5 - Main - Started