* Sea-Bird SBE 9 Data File:
* FileName = C:\Data\ctd\kn213-02081.hex
* Software Version Seasave V 7.21k
* Temperature SN = 4360
* Conductivity SN = 3042
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 26 2013 23:11:04
* NMEA Latitude = 65 29.98 N
* NMEA Longitude = 054 30.01 W
* NMEA UTC (Time) = Sep 26 2013 23:11:02
* Store Lat/Lon Data = Append to Every Scan
** Cast: 081
** Station: SILLS08
* System UTC = Sep 26 2013 23:11:04
# interval = seconds: 0.0416667
# start_time = Sep 26 2013 23:11:02 [NMEA time, header]
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4360</SerialNumber>
#       <CalibrationDate>30-NOV-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36276571e-003</G>
#       <H>6.49987858e-004</H>
#       <I>2.31687277e-005</I>
#       <J>1.86800537e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3042</SerialNumber>
#       <CalibrationDate>29-NOV-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.06506027e+001</G>
#         <H>1.45090848e+000</H>
#         <I>-9.42311188e-005</I>
#         <J>8.21109615e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0462</SerialNumber>
#       <CalibrationDate>15-Mar-12</CalibrationDate>
#       <C1>-4.872453e+004</C1>
#       <C2>2.143123e-002</C2>
#       <C3>1.347220e-002</C3>
#       <D1>3.959500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.994567e+001</T1>
#       <T2>-2.488396e-004</T2>
#       <T3>3.985300e-006</T3>
#       <T4>7.998620e-010</T4>
#       <Slope>0.99988587</Slope>
#       <Offset>-1.74580</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.282050e-002</AD590M>
#       <AD590B>-9.111540e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2774</SerialNumber>
#       <CalibrationDate>04-DEC-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.32567347e-003</G>
#       <H>6.47169632e-004</H>
#       <I>2.43009236e-005</I>
#       <J>2.50450969e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3089</SerialNumber>
#       <CalibrationDate>29-NOV-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03631305e+001</G>
#         <H>1.39367075e+000</H>
#         <I>1.69743514e-004</I>
#         <J>4.96198739e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>2008-03-10</CalibrationDate>
#       <ScaleFactor>1.00000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0710</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>20080310</CalibrationDate>
#       <ScaleFactor>5.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.048000</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-1117DR</SerialNumber>
#       <CalibrationDate>05/08/11 deck 27March13</CalibrationDate>
#       <M>20.6004</M>
#       <B>-0.1259</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1247</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0113</SerialNumber>
#       <CalibrationDate>28-NOV-2012</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.6580e-001</Soc>
#         <offset>-0.5750</offset>
#         <A>-2.5727e-003</A>
#         <B> 1.7769e-004</B>
#         <C>-2.4525e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.7300</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR-240 6383</SerialNumber>
#       <CalibrationDate>20-FEB-2013</CalibrationDate>
#       <ConversionFactor>1663.61000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Sep 27 2013 02:50:11, 7.21k
# datcnv_in = c:\data\ctd\kn213-02081.hex c:\data\ctd\kn213-02081.XMLCON
# datcnv_ox_hysteresis_correction = yes
# datcnv_bottle_scan_range_source = scans marked with bottle confirm bit, 0, 5
# datcnv_scans_per_bottle = 121
# bottlesum_date = Sep 27 2013 02:50:16, 7.21k
# bottlesum_in = c:\data\ctd\process\kn213-02081.ros c:\data\ctd\process\kn213-02081.XMLCON
# bottlesum_ox_tau_correction = yes
    Bottle        Date      Sal00      Sal11 Sbeox0ML/L       SvCM       PrDM      DepSM      T090C      T190C      C0S/m      C1S/m  FlECO-AFL   CStarTr0TurbWETntu0    Sbeox0V       Scan
  Position        Time                                                                                                                                                                     
      1    Sep 26 2013    32.8882    32.4859    6.79619    1462.20      2.777      2.750     3.5834     3.5578   3.042275   3.006454     0.5407    95.3017     1.4287     3.0937      12307 (avg)
              23:19:37                                                  0.148      0.146     0.0002     0.0017   0.000022   0.000476     0.0222     0.0238     0.0134     0.0006         35 (sdev)
                                                                        2.515      2.490     3.5829     3.5550   3.042215   3.005607     0.5110    95.2547     1.4145     3.0919      12247 (min)
                                                                        3.081      3.050     3.5841     3.5606   3.042318   3.007270     0.5843    95.3553     1.4511     3.0943      12367 (max)