* Sea-Bird SBE 9 Data File:
* FileName = C:\Data\ctd\kn213-02135.hex
* Software Version Seasave V 7.21k
* Temperature SN = 4360
* Conductivity SN = 3042
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Oct 03 2013 00:23:36
* NMEA Latitude = 63 22.47 N
* NMEA Longitude = 053 53.97 W
* NMEA UTC (Time) = Oct 03 2013 00:23:33
* Store Lat/Lon Data = Append to Every Scan
** Cast: 135
** Station: NLSE08
* System UTC = Oct 03 2013 00:23:36
# interval = seconds: 0.0416667
# start_time = Oct 03 2013 00:23:33 [NMEA time, header]
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4360</SerialNumber>
#       <CalibrationDate>30-NOV-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36276571e-003</G>
#       <H>6.49987858e-004</H>
#       <I>2.31687277e-005</I>
#       <J>1.86800537e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3042</SerialNumber>
#       <CalibrationDate>29-NOV-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.06506027e+001</G>
#         <H>1.45090848e+000</H>
#         <I>-9.42311188e-005</I>
#         <J>8.21109615e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0462</SerialNumber>
#       <CalibrationDate>15-Mar-12</CalibrationDate>
#       <C1>-4.872453e+004</C1>
#       <C2>2.143123e-002</C2>
#       <C3>1.347220e-002</C3>
#       <D1>3.959500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.994567e+001</T1>
#       <T2>-2.488396e-004</T2>
#       <T3>3.985300e-006</T3>
#       <T4>7.998620e-010</T4>
#       <Slope>0.99988587</Slope>
#       <Offset>-1.74580</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.282050e-002</AD590M>
#       <AD590B>-9.111540e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2774</SerialNumber>
#       <CalibrationDate>04-DEC-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.32567347e-003</G>
#       <H>6.47169632e-004</H>
#       <I>2.43009236e-005</I>
#       <J>2.50450969e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3089</SerialNumber>
#       <CalibrationDate>29-NOV-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03631305e+001</G>
#         <H>1.39367075e+000</H>
#         <I>1.69743514e-004</I>
#         <J>4.96198739e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>2008-03-10</CalibrationDate>
#       <ScaleFactor>1.00000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0710</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>20080310</CalibrationDate>
#       <ScaleFactor>5.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.048000</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-1117DR</SerialNumber>
#       <CalibrationDate>05/08/11 deck 27March13</CalibrationDate>
#       <M>20.6004</M>
#       <B>-0.1259</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1247</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1646</SerialNumber>
#       <CalibrationDate>08-Feb-13</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.6260e-001</Soc>
#         <offset>-0.5344</offset>
#         <A>-2.7581e-003</A>
#         <B> 1.0107e-004</B>
#         <C>-1.8290e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR-240 6383</SerialNumber>
#       <CalibrationDate>20-FEB-2013</CalibrationDate>
#       <ConversionFactor>1663.61000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Oct 03 2013 01:12:15, 7.21k
# datcnv_in = c:\data\ctd\kn213-02135.hex c:\data\ctd\kn213-02135.XMLCON
# datcnv_ox_hysteresis_correction = yes
# datcnv_bottle_scan_range_source = scans marked with bottle confirm bit, 0, 5
# datcnv_scans_per_bottle = 121
# bottlesum_date = Oct 03 2013 01:12:27, 7.21k
# bottlesum_in = c:\data\ctd\process\kn213-02135.ros c:\data\ctd\process\kn213-02135.XMLCON
# bottlesum_ox_tau_correction = yes
    Bottle        Date      Sal00      Sal11 Sbeox0ML/L       SvCM       PrDM      DepSM      T090C      T190C      C0S/m      C1S/m  FlECO-AFL   CStarTr0TurbWETntu0    Sbeox0V       Scan
  Position        Time                                                                                                                                                                     
      1    Oct 03 2013    33.8507    33.8514    6.71743    1470.66      2.756      2.729     5.3308     5.3286   3.275633   3.275505     0.5592    95.7563     0.8875     2.6112      59482 (avg)
              01:04:53                                                  0.061      0.060     0.0007     0.0004   0.000074   0.000045     0.0233     0.0365     0.0048     0.0009         35 (sdev)
                                                                        2.536      2.512     5.3298     5.3280   3.275483   3.275390     0.5354    95.7075     0.8833     2.6082      59422 (min)
                                                                        2.882      2.854     5.3325     5.3294   3.275788   3.275621     0.6209    95.8081     0.8955     2.6130      59542 (max)