% *********************************************************************
% *********************************************************************
% ***  Parameter file read by flux_eval.m routine.          	  ***
% ***  Written by LB on July 06			                    ***
% ***                         			                    ***
% ***  Note: - Do not forget to put the character '\' at the end    ***
% *** 	   of each path!                                        ***
% ***        - Comment style is '%'	                                ***
% *********************************************************************
% *********************************************************************


% **** Cruise name ****
TST

% **** Year ****
2007

% **** Research vessel ****
RHB

% **** Flux Raw data path on ETLDAS12 ****
w:\data\AMMA\RHB\flux\Raw\

% **** Processed data path on ETLDAS12 ****
w:\data\AMMA\RHB\flux\Processed\		%proc files path
w:\data\AMMA\RHB\flux\Processed\		%spec files path

% **** Processed images path on ETLDAS12 ****
w:\data\AMMA\RHB\flux\Raw_Images\		%daily saved images path

% **** Data back-up path on external hard disk ****
0		%if backup needed, put 1, otherwise put 0
w:\data\AMMA\RHB\flux\Raw\		% Raw Data
w:\data\AMMA\RHB\flux\Processed\		% Processed Data

% **** Sonic configuration ****
R3		%Sonic model
20		%frequency (Hz)
0		%rotated 30 deg = 1 (rot=AXIS mode)
1		%Sonic output. 0=speed of sound, 1=Temperature (degC)

% **** Licor configuration ****
10		%frequency (Hz)
 
% **** Clear sky model configuration ****
0.2		%aerosol optical depth band 1
0.2		%aerosol optical depth band 2
0.2		%column ozone
3.5		%column water vapor (cm)

% **** Other parameters ****
1010		%surface pressure (mb)
18.5		%wind speed measurement height (m)
15		%air T measurement height (m)
15		%air q measurement height (m)