04/15/2008   08:00:00: opening error log

04/15/2008   08:05:00: error pulling file: Z:\20080851800MMCRMom.nc

04/15/2008   09:00:00: closing error log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
04/15/08 08:00:02 Level 2 - NetCDF_Spec - Could not read calibration table NetCDF file.
04/15/08 08:00:02 Level 2 - NetCDF_Spec - Data may be incorrect.
04/15/08 08:00:02 Level 2 - NetCDF1 - Could not read calibration table NetCDF file.
04/15/08 08:00:02 Level 2 - NetCDF1 - Data may be incorrect.
04/15/08 08:00:02 Level 2 - NetCDF_Spec1 - Could not read calibration table NetCDF file.
04/15/08 08:00:02 Level 2 - NetCDF_Spec1 - Data may be incorrect.
04/15/08 08:00:02 Level 2 - NetCDF - Could not read calibration table NetCDF file.
04/15/08 08:00:02 Level 2 - NetCDF - Data may be incorrect.
04/15/08 08:10:21 Level 5 - Main - Lapxm Service Stopped
04/15/08 08:10:21 Level 5 - Main - UnLoad Requested
04/15/08 08:10:22 Level 5 - Main - UnLoaded
04/15/08 08:10:22 Level 2 - Main - UnLoad() - Unable to uninitialize DwellControl_Calibration
04/15/08 08:11:15 Level 5 - Main - Lapxm Service Started
04/15/08 08:11:15 Level 5 - Main - Auto Start due to 'AlwayAutoStart' being enabled.
04/15/08 08:11:15 Level 5 - Main - C:\Program Files\Crada\Lapxm\Config\Custom\Eureka.cfg
04/15/08 08:11:20 Level 5 - Main - Load Requested
04/15/08 08:11:20 Level 5 - Main - Loaded - Eureka.cfg
04/15/08 08:11:20 Level 5 - Main - Start Requested
04/15/08 08:11:23 Level 5 - Main - Started