THIS FILE: 
Editdate: 180213
DAQ PASSWORD: r0srr0sr
		DATA FILES ---------------------
RT OUT PATH: data
NO DATA WAIT TIME: 3600
    # SIMULATE FLAG
SIMULATEFLAG: 0
    # FIXED TILT 0=no, 1=yes
FIXED TILT FLAG: 0
FIXED PITCH: 0.1
FIXED ROLL: 0.1
ROSR SERIAL NUMBER: 1
		Verbose mode prints out test messages and data.  VERBOSE = 1, NOT VERBOSE = 0
		avgrosr.pl makes a file called data/tmp.txt.
VERBOSE MODE: 0
		## Specifics on the Instrument
		## rosr01 : kt1585_sn11486.txt
KT15 SERIAL NUMBER: 11486
KT15 FILTER FILE: kt15/kt1585_sn11486.txt
	========================
		HUB ADDRESS AND PORTS
		PDS default: 192.168.255.1
	========================
SERIAL LINE: /dev/tty.PL2303-001013FA
SERIAL SPEED: 9600
    # KAIMEI NETWORK
SERIAL HUB IP: 10.198.3.109
IBOOT IP: 10.198.3.110
PC IP: 10.198.3.111
TEST IP: 10.198.3.103
	# ROSR -- 10001, simulate=0
ROSR PORT: 10001
	# GPS -- 10003, Fixed=-1, simulate=0
GPS PORT: 10003
	# MODEM -- 10004, Not connected=-1, simulate=0
SBD PORT: -1
	# SCS OUTPUT PORT -- TX a string out this port
SCS HUB TXD PORT: 10004
	# SCS INPUT PORT -- receive a string here using TCPIP
SCS HUB RXD PORT: 10005
  # 0 if not in use
TELNET SERVER IP: 0
  # KAIMEI SOCKet
TELNET PROGRAM: socktxx
TELNET SERVER IP: 10.198.5.1
TELNET SERVER PORT: 4025
	=======================
		OPERATIONAL PARAMETERS
	=======================
	# RUN
	# 
SSST SLOPE : 1.0098
SSST OFFSET: -0.035
    # 2015 cal 1.0106 / -0.043
	# !! view angles (same as eeprom) -- (bb1, bb2, sky, sea)
SCAN VIEW ANGLES: 265 325 45 135
	# CALIBRATION
CAL SSST SLOPE: 1
CAL SSST OFFSET: 0
CAL SCAN VIEW ANGLES: 265 325 45 90
	=======================
		BLACK BODY
	=======================
BLACK BODY EMISSIVITY : 1.0
	## set Vref to 0 and the values from the 2*adc12-7 will be used.
BB THERM VREF: 0
BB TEMP Ref R: 10000
	# Resistances from testing with precision resistances. See notes 090909.
BB RESISTORS: 10000, 10000, 10000, 10000, 10000, 10000
	# Rref for wintemp and tt8temp
APPERATURE THERM REF RESISTOR: 10000
REF VOLTAGE FOR 12 BIT ADC: 4.0928
	# Rref2 for four ysi apperature therms
	## ROSR-01: 9995 9984 9997 9997
	## ROSR-04: 10000 10000 10000 10000
APPERATURE THERMS REF RESISTANCES: 10000 10000 10000 10000
	=======================
		CALIBRATION PARAMETERS
	=======================
	#CAL EMIS: 0 = field use, compute e from angle,  ~=1 = calibration mode
CALIBRATION EMISSIVITY: 0
	# INDEX -- (0,1,...) index.  Use for calibration case
CALIBRATION VIEW POSITION : 3
	# CAL VIEW ANGLES (SAME AS ROSR EEPROM) -- (bb1, bb2, sky, sea)
CAL VIEW ANGLES: 265 325 45 90
	========================
		EXPERIMENT INFO
	========================
EXPERIMENT NAME: RV KAIMEI 
GEOGRAPHIC LOCATION: JAPAN
	#two characters for a ship code
PLATFORM NAME: RV KAIMEI
LOCATION ON PLATFORM: FOREMAST TOP
HEIGHT ABOVE SEA LEVEL (m): 40 m approx
SHIP TYPE: RV
SHIP NAME: KAIMEI
CRUISE NAME: --
	# port or starboard
PLATFORM SIDE: STARBOARD
	========================
		QUALITY ERROR CHECK
	========================
MINIMUM EXPECTED LATITUDE: 0
MAXIMUM EXPECTED LATITUDE: 90
MINIMUM EXPECTED LONGITUDE: -180
MAXIMUM EXPECTED LONGITUDE: 360
MISSING VALUE: -999
	========================
		COMMENTS/LOG
	========================
COMMENTS:
 RETURNED TO RMR CO. 2017-12-14
 Excellant condition considering.
END
	========================
		GPS SETUP
		NOTE: Use the Garmin-supplied Windows program to set the 17x for
		9600 baud, 1-sec output, GPRMC only string.
	========================
##GPS MODEL NUMBER: GPS17X
##GPS MIN SAMPLES FOR AVG: 3
GPS AVERAGING TIME: 120
GPS FIXED LATITUDE: 47.60329
GPS FIXED LONGITUDE: -122.28797
		Magnetic variation, + = East of true
GPS FIXED VARIATION: 18.1
GPS DEAD TIME ALARM SECS:60	
  ========================
  ROSR
  ========================
ROSR AVERAGING TIME (sec): 600
SEA EMISSIVITY (UNCORRECTED): 0.9870975
APERATURE EMISSIVITY : 0.95
##MAXIMUM NUMBER OF AVERAGES (Set to 1e20 for final run) : 1e20
MIN SAMPLES FOR AVG: 2
SELF-HEAT FLAG: 1
	========================
		END SETUP FILE
	========================